SMOS data and extreme events

Science.gov (United States)

Kerr, Yann; Wigneron, Jean-Pierre; Ferrazzoli, Paolo; Mahmoodi, Ali; Al-Yaari, Amen; Parrens, Marie; Bitar, Ahmad Al; Rodriguez-Fernandez, Nemesio; Bircher, Simone; Molero-rodenas, Beatriz; Drusch, Matthias; Mecklenburg, Susanne

2017-04-01

The SMOS (Soil Moisture and Ocean Salinity) satellite was successfully launched in November 2009. This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surface (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. These geophysical features are important as they control the energy balance between the surface and the atmosphere. Their knowledge at a global scale is of interest for climatic and weather researches, and in particular in improving model forecasts. The Soil Moisture and Ocean Salinity mission has now been collecting data for over 7 years. The whole data set has been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS) while operational near real time soil moisture data is now available and assimilation of SMOS data in NWP has proved successful. After 7 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events. We have also produced a 15 year soil moisture data set by merging SMOS and AMSR using a neural network approach. The purpose of this communication is to present the mission results after more than seven years in orbit in a climatic trend perspective, as through such a period anomalies can be detected. Thereby we benefit from consistent datasets provided through the latest reprocessing using most recent algorithm enhancements. Using the above mentioned products it is possible to follow large events such as the evolution of the droughts in North America, or water fraction evolution over the Amazonian basin. In this occasion we will focus on the analysis of SMOS and ancillary products anomalies to reveal two climatic trends, the temporal evolution of water storage over the Indian continent in relation to rainfall anomalies, and the global impact of El Nino types of events on the general water storage distribution. This presentation shows in detail the use of long term data sets

Assimilation of SMOS Retrieved Soil Moisture into the Land Information System

Science.gov (United States)

Blankenship, Clay; Case, Jonathan; Zavodsky, Bradley; Jedlovec, Gary

2014-01-01

Soil moisture retrievals from the Soil Moisture and Ocean Salinity (SMOS) instrument are assimilated into the Noah land surface model (LSM) within the NASA Land Information System (LIS). Before assimilation, SMOS retrievals are bias-corrected to match the model climatological distribution using a Cumulative Distribution Function (CDF) matching approach. Data assimilation is done via the Ensemble Kalman Filter. The goal is to improve the representation of soil moisture within the LSM, and ultimately to improve numerical weather forecasts through better land surface initialization. We present a case study showing a large area of irrigation in the lower Mississippi River Valley, in an area with extensive rice agriculture. High soil moisture value in this region are observed by SMOS, but not captured in the forcing data. After assimilation, the model fields reflect the observed geographic patterns of soil moisture. Plans for a modeling experiment and operational use of the data are given. This work helps prepare for the assimilation of Soil Moisture Active/Passive (SMAP) retrievals in the near future.

The ESA SMOS Validation Rehearsal Campaign at the Valencia Anchor Station Area in the Framework of the SMOS Cal/Val AO Project no. 3252

Science.gov (United States)

Lopez-Baeza, E.

2009-04-01

Institute of Maritime Research, FIMR). Together with the ground soil moisture measurements, other ground and meteorological measurements from the Valencia Anchor Station area, kindly provided by other institutions, are currently been used to simulate passive microwave brightness temperature to have satellite "match ups" for validation purposes and to test the retrieval algorithms. The spatialization of the ground measurements up to a SMOS pixel is carried out by using a Soil-Vegetation-Atmosphere-Transfer (SVAT) model (SURFEX, SURFace EXternalisée) from Météo France. Output data, particularly soil moisture, will then be used to simulate the L-band surface emission through the use of the L-MEB (L-band Microwave Emission of the Biosphere) model. For that purpose, the microwave model uses specific ground information regarding the soil and vegetation properties provided by the validation teams. The aggregation of the brightness temperatures at the SMOS pixel scale is then carried out in an operational way taking into account the SMOS viewing configuration and antenna properties. This paper presents an overview of the ESA SMOS Validation Rehearsal Campaign at the Valencia Anchor Station area making more emphasis on the development of the ground activities which are significant for the performance of the different validation components and giving an outline of the methodology to be used for the whole SMOS Reference Pixel.

Droughts and floods monitoring in Poland with SMOS, SEVIRI and model data

Science.gov (United States)

Kotarba, A. Z.; Stankiewicz, K.; Słomiński, J.; Słomińska, E.; Marczewski, W.

2012-04-01

Droughts and floods represent the extreme cases of hydrological regime. Both significantly influence ecological processes in the environment as well as socio-economic situation of human activity. Measurements of soil moisture and rainfall is being recognized as fundamental for droughts and floods monitoring. We used Soil Moisture and Ocean Salinity (SMOS) L2 soil moisture data and Spinning Enhanced Visible and InfraRed Imager (SEVIRI) rain rate approximation to evaluate the intensity and extend of droughts/floods events in Poland in 2010 and 2011. SEVIRI Multi-Sensor Precipitation Estimate rain rates were used for calculation of monthly rain accumulation (24 SEVIRI L2 datasets per day), then projected to match SMOS spatial reference. Based on SEVIRI data, monthly sum of precipitation was estimated for each SMOS DGG cell within area of interest (the ROI covers Poland and the closest neighborhood). At the DGG level, SMOS SM and SEVIRI precipitation data were compared for each month since May 2010. Nearly two year series provided a background for droughts and floods events. Final L3 products of SMOS SM and SEVIRI precipitation were compared with operational, traditionally-developed drought risk maps, in order to evaluate the degree of agreement between remotely sensed products and models calculated with surface-based measurements only.

Surface Runoff Estimation Using SMOS Observations, Rain-gauge Measurements and Satellite Precipitation Estimations. Comparison with Model Predictions

Science.gov (United States)

Garcia Leal, Julio A.; Lopez-Baeza, Ernesto; Khodayar, Samiro; Estrela, Teodoro; Fidalgo, Arancha; Gabaldo, Onofre; Kuligowski, Robert; Herrera, Eddy

Surface runoff is defined as the amount of water that originates from precipitation, does not infiltrates due to soil saturation and therefore circulates over the surface. A good estimation of runoff is useful for the design of draining systems, structures for flood control and soil utilisation. For runoff estimation there exist different methods such as (i) rational method, (ii) isochrone method, (iii) triangular hydrograph, (iv) non-dimensional SCS hydrograph, (v) Temez hydrograph, (vi) kinematic wave model, represented by the dynamics and kinematics equations for a uniforme precipitation regime, and (vii) SCS-CN (Soil Conservation Service Curve Number) model. This work presents a way of estimating precipitation runoff through the SCS-CN model, using SMOS (Soil Moisture and Ocean Salinity) mission soil moisture observations and rain-gauge measurements, as well as satellite precipitation estimations. The area of application is the Jucar River Basin Authority area where one of the objectives is to develop the SCS-CN model in a spatial way. The results were compared to simulations performed with the 7-km COSMO-CLM (COnsortium for Small-scale MOdelling, COSMO model in CLimate Mode) model. The use of SMOS soil moisture as input to the COSMO-CLM model will certainly improve model simulations.

On the Balancing of the SMOS Ocean Salinity Retrieval Cost Function

Science.gov (United States)

Sabia, R.; Camps, A.; Portabella, M.; Talone, M.; Ballabrera, J.; Gourrion, J.; Gabarró, C.; Aretxabaleta, A. L.; Font, J.

2009-04-01

The Soil Moisture and Ocean Salinity (SMOS) mission will be launched in mid 2009 to provide synoptic sea surface salinity (SSS) measurements with good temporal resolution [1]. To obtain a proper estimation of the SSS fields derived from the multi-angular brightness temperatures (TB) measured by the Microwave Interferometric Radiometer by Aperture Synthesis (MIRAS) sensor, a comprehensive inversion procedure has been defined [2]. Nevertheless, several salinity retrieval issues remain critical, namely: 1) Scene-dependent bias in the simulated TBs, 2) L-band forward geophysical model function definition, 3) Auxiliary data uncertainties, 4) Constraints in the cost function (inversion), especially in salinity term, and 5) Adequate spatio-temporal averaging. These issues will have to be properly addressed in order to meet the proposed accuracy requirement of the mission: a demanding 0.1 psu (practical salinity units) after averaging in a 30-day and 2°x2° spatio-temporal boxes. The salinity retrieval cost function minimizes the difference between the multi-angular measured SMOS TBs (yet simulated, so far) and the modeled TBs, weighted by the corresponding radiometric noise of the measurements. Furthermore, due to the fact that the minimization problem is both non-linear and ill-posed, background reference terms are needed to nudge the solution and ensuring convergence at the same time [3]. Constraining terms in SSS, sea surface temperature (SST) and wind speed are considered with their respective uncertainties. Moreover, whether SSS constraints have to be included or not as part of the retrieval procedure is still a matter of debate. On one hand, neglecting background reference information on SSS might prevent from retrieving salinity with the prescribed accuracy or at least within reasonable error. Conversely, including constraints in SSS, relying for instance on the climatology, may force the retrieved value to be too close to the reference prior values, thus

SMOS near-real-time soil moisture product: processor overview and first validation results

Directory of Open Access Journals (Sweden)

N. J. Rodríguez-Fernández

2017-10-01

Full Text Available Measurements of the surface soil moisture (SM content are important for a wide range of applications. Among them, operational hydrology and numerical weather prediction, for instance, need SM information in near-real-time (NRT, typically not later than 3 h after sensing. The European Space Agency (ESA Soil Moisture and Ocean Salinity (SMOS satellite is the first mission specifically designed to measure SM from space. The ESA Level 2 SM retrieval algorithm is based on a detailed geophysical modelling and cannot provide SM in NRT. This paper presents the new ESA SMOS NRT SM product. It uses a neural network (NN to provide SM in NRT. The NN inputs are SMOS brightness temperatures for horizontal and vertical polarizations and incidence angles from 30 to 45°. In addition, the NN uses surface soil temperature from the European Centre for Medium-Range Weather Forecasts (ECMWF Integrated Forecast System (IFS. The NN was trained on SMOS Level 2 (L2 SM. The swath of the NRT SM retrieval is somewhat narrower (∼ 915 km than that of the L2 SM dataset (∼ 1150 km, which implies a slightly lower revisit time. The new SMOS NRT SM product was compared to the SMOS Level 2 SM product. The NRT SM data show a standard deviation of the difference with respect to the L2 data of < 0.05 m3 m−3 in most of the Earth and a Pearson correlation coefficient higher than 0.7 in large regions of the globe. The NRT SM dataset does not show a global bias with respect to the L2 dataset but can show local biases of up to 0.05 m3 m−3 in absolute value. The two SMOS SM products were evaluated against in situ measurements of SM from more than 120 sites of the SCAN (Soil Climate Analysis Network and the USCRN (US Climate Reference Network networks in North America. The NRT dataset obtains similar but slightly better results than the L2 data. In summary, the NN SMOS NRT SM product exhibits performances similar to those of the Level 2 SM product

2000 days of SMOS at the Barcelona Expert Centre: a tribute to the work of Jordi Font

Directory of Open Access Journals (Sweden)

Antonio Turiel

2016-09-01

Full Text Available Soil Moisture and Ocean Salinity (SMOS is the first satellite mission capable of measuring sea surface salinity and soil moisture from space. Its novel instrument (the L-band radiometer MIRAS has required the development of new algorithms to process SMOS data, a challenging task due to many processing issues and the difficulties inherent in a new technology. In the wake of SMOS, a new community of users has grown, requesting new products and applications, and extending the interest in this novel brand of satellite services. This paper reviews the role played by the Barcelona Expert Centre under the direction of Jordi Font, SMOS co-principal investigator. The main scientific activities and achievements and the future directions are discussed, highlighting the importance of the oceanographic applications of the mission.

RFI in SMOS data detected by polarimetry

DEFF Research Database (Denmark)

Kristensen, Steen Savstrup; Balling, Jan E.; Skou, Niels

2012-01-01

ESA's soil moisture and ocean salinity mission, SMOS, has been found to suffer much more from radio frequency interference (RFI) than expected, and methods for detecting RFI in SMOS data are of vital importance. This paper describes a method using the 3rd and 4th Stokes parameters for the purpose...

The NAFE'05/CoSMOS Data Set: Toward SMOS Soil Moisture Retrieval, Downscaling, and Assimilation

DEFF Research Database (Denmark)

Panciera, Rocco; Walker, Jeffrey P.; Kalma, Jetse D.

2008-01-01

The National Airborne Field Experiment 2005 (NAFE'05) and the Campaign for validating the Operation of Soil Moisture and Ocean Salinity (COSMOS) were undertaken in November 2005 in the Goulburn River catchment, which is located in southeastern Australia. The objective of the joint campaign......-resolution data from SMOS; and 3) testing its assimilation into land surface models for root zone soil moisture retrieval. This paper describes the NAFE'05 and COSMOS airborne data sets together with the ground data collected in support of both aircraft campaigns. The airborne L-band acquisitions included 40 km x...

DOMECair: An Airborne Campaign in Antarctica Supporting SMOS Calibration

DEFF Research Database (Denmark)

Skou, Niels; Kristensen, Steen Savstrup; Søbjærg, Sten Schmidl

2013-01-01

In search for a stable, well characterized terrestrial calibration target for SMOS, an airborne campaign was carried out in January 2013 over the Dome C area of Antarctica, and the surface was measured by an L-band radiometer. The focus was on homogeneity, and an area of 350 × 350 km around...

Effect of lime, N, P, and K amendments to surface-mined coal spoils on yield and chemical composition of common Bermuda grass

Energy Technology Data Exchange (ETDEWEB)

Ebelhar, M W; Barnhisel, R I; Akin, G W; Powell, J L

1982-12-01

Common Bermuda grass (Cynodon dactylon, L. Pers.) was used as an alternative to cool-season grasses such as tall fescue (Festuca arundinacea Schreb.) on acid sandstone surface-mine spoils in western Kentucky. Lime, N, P, and K fertilizer amendments were evaluated as to their effects in promoting Bermuda grass growth and development. The applied lime was effective in raising the pH from 3.4 to 4.6, 5.7, and 6.3 for the 18, 36 and 72 metric ton/ha treatments, respectively, over a 17-month period. Nitrogen was found to affect Bermuda grass production significantly and severe deficiency symptoms were observed where N was not applied. Dry matter yields increased significantly with each additional increment of N applied. Although the application of P and K increased the concentration of these ions in the plant tissues, the main influence of P and K was to increase the plants' resistance to winter killing; little effect on total dry matter production was observed. 19 references.

A soil moisture network for SMOS validation in Western Denmark

DEFF Research Database (Denmark)

Bircher, Simone; Skou, N.; Jensen, Karsten Høgh

2012-01-01

network was established in the Skjern River Catchment, Denmark. The objectives of this article are to describe a method to implement a network suited for SMOS validation, and to present sample data collected by the network to verify the approach. The design phase included (1) selection of a single SMOS...... between the north-east and south-west were found to be small. A first comparison between the 0–5 cm network averages and the SMOS soil moisture (level 2) product is in range with worldwide validation results, showing comparable trends for SMOS retrieved soil moisture (R2 of 0.49) as well as initial soil......). Based on these findings, the network performs according to expectations and proves to be well-suited for its purpose. The discrepancies between network and SMOS soil moisture will be subject of subsequent studies...

The CoSMOS L-band experiment in Southeast Australia

DEFF Research Database (Denmark)

Saleh, K.; Kerr, Y.H.; Boulet, G.

2007-01-01

The CoSMOS (Campaign for validating the Operation of the Soil Moisture and Ocean Salinity mission) campaign was conducted during November of 2005 in the Goulburn River Catchment, in SE Australia. The main objective of CoSMOS was to obtain a series of L-band measurements from the air in order...... the importance of dew and interception for soil moisture retrievals. This paper summarises the campaign activities, and presents progress on the analysis of the CoSMOS data set....

Smos Land Product Validation Activities at the Valencia Anchor Station

Science.gov (United States)

Lopez-Baeza, Ernesto

ABSTRACT Soil moisture is a key parameter controlling the exchanges between the land surface and the atmosphere. In spite of being important for weather and climate modeling, this parameter is not well observed at a global scale. The SMOS (Soil Moisture and Ocean Salinity) Mission was designed by the European Space Agency (ESA) to measure soil moisture over continental surfaces as well as surface salinity over the oceans. Since 2001, the Valencia Anchor Station is currently being prepared for the validation of SMOS land products, namely soil moisture content and vegetation water content. The site has recently been selected by the Mission as a core validation site, mainly due to the reasonable homogeneous characteristics of the area which make it appropriate to undertake the validation of SMOS Level 2 land products during the Mission Commissioning Phase, before attempting more complex areas. Close to SMOS launch, ESA has defined and designed a SMOS V alidation Rehearsal C ampaign P lan which purpose is to repeat the Commissioning Phase execution with all centers, all tools, all participants, all structures, all data available, assuming all tools and structures are ready and trying to produce as close as possible the post-launch conditions. The aim is to test the readiness, the ensemble coordination and the speed of operations, and to avoid as far as possible any unexpected deficiencies of the plan and procedure during the real C ommissioning P hase campaigns. For the rehearsal activity, a control area of 10 x 10 km2 has been chosen at the Valencia Anchor Station study area where a network of ground soil moisture measuring stations is being set up based on the definition of homogeneous physio-hydrological units, attending to climatic, soil type, lithology, geology, elevation, slope and vegetation cover conditions. These stations are linked via a wireless communication system to a master post accessible via internet. The ground soil moisture stations will also be used

Validation of SMOS Brightness Temperatures During the HOBE Airborne Campaign, Western Denmark

DEFF Research Database (Denmark)

Bircher, Simone; Balling, Jan E.; Skou, Niels

2012-01-01

The Soil Moisture and Ocean Salinity (SMOS) mission delivers global surface soil moisture fields at high temporal resolution which is of major relevance for water management and climate predictions. Between April 26 and May 9, 2010, an airborne campaign with the L-band radiometer EMIRAD-2...... was carried out within one SMOS pixel (44 $times$ 44 km) in the Skjern River Catchment, Denmark. Concurrently, ground sampling was conducted within three 2 $times$ 2 km patches (EMIRAD footprint size) of differing land cover. By means of this data set, the objective of this study is to present the validation...... vegetation and higher open water fractions at surrounding grid nodes....

Optimization of a Radiative Transfer Forward Operator for Simulating SMOS Brightness Temperatures over the Upper Mississippi Basin, USA

Science.gov (United States)

Lievens, H.; Verhoest, N. E. C.; Martens, B.; VanDenBerg, M. J.; Bitar, A. Al; Tomer, S. Kumar; Merlin, O.; Cabot, F.; Kerr, Y.; DeLannoy, G. J. M.;

A soil moisture and temperature network for SMOS validation in Western Denmark

DEFF Research Database (Denmark)

Bircher, Simone; Skou, Niels; Jensen, K. H.

2011-01-01

The Soil Moisture and Ocean Salinity Mission (SMOS) acquires surface soil moisture data globally, and thus product validation for a range of climate and environmental conditions across continents is a crucial step. For this purpose, a soil moisture and temperature network of Decagon ECH2O 5TE...... SMOS pixel (44 × 44 km), which is representative of the land surface conditions of the catchment and with minimal impact from open water (2) arrangement of three network clusters along the precipitation gradient, and (3) distribution of the stations according to respective fractions of classes...... representing the prevailing environmental conditions. Overall, measured moisture and temperature patterns could be related to the respective land cover and soil conditions. Texture-dependency of the 0–5 cm soil moisture measurements was demonstrated. Regional differences in 0–5 cm soil moisture, temperature...

Microwave-derived soil moisture over Mediterranean land uses: from ground-based radiometry to SMOS first observations

Science.gov (United States)

Saleh, Kauzar; Antolín, Carmen; Juglea, Silvia; Kerr, Yann; Millán-Scheiding, Cristina; Novello, Nathalie; Pardé, Mickael; Wigneron, Jean-Pierre; Zribi, Mehrez; López-Baeza, Ernesto

2010-05-01

This communication will present the main results of a series of airborne and ground-based experiments conducted at the Valencia Anchor Station (VAS) site for the implementation of the SMOS emission model L-MEB (L-band Microwave Emission model of the Biosphere, Wigneron et al., 2007), and will evaluate the performance of L-MEB against SMOS measurements. The L-MEB model has been implemented in the context of the SMOS mission and through numerous radiometry experiments over different land uses. Within L-MEB, each land use is characterised by model parameterisations that are used to describe the radiative transfer at L-band. They describe, for instance, the attenuation properties of different canopies, or the effect of soil roughness on the surface emission. In recent years, the Valencia Anchor Station site (VAS) has hosted various radiometry experiments. These were performed at different scales, from the plot scale to the regional scale (up to 50 km), using ground-based and airborne-based radiometry. The main results are discussed in this communication, and some preliminary comparisons with SMOS measurements are presented. 1) Ground-based experiments. MELBEX-I was a ground-radiometry experiment run in 2005 using the L-band radiometer EMIRAD over a plot of shrub land. We will present results from this experiment (Cano et al., 2009), that highlighted a constant (and small) contribution of Mediterranean shrub land to the overall emission, and investigated the role of exposed rocks in the surface emission. MELBEX-II was a ground-radiometry experiment run in 2007 using the EMIRAD L-band radiometer over a plot of vineyards throughout the whole vegetation cycle. Vineyards are the main land use at the VAS site, therefore parameterisations for vineyards are key for the validation of SMOS data at VAS. This communication will discuss, in particular, estimates of microwave surface roughness throughout the crop year, and changes in the canopy microwave properties throughout the

Bermuda 3 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 3 arc-second Bermuda DEM will be used to support NOAA's tsunami forecast system and for tsunami inundation modeling. This DEM encompasses the islands of Bermuda...

Bermuda 1 arc-second Coastal Digital Elevation Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The 1 arc-second Bermuda DEM will be used to support NOAA's tsunami forecast system and for tsunami inundation modeling. This DEM encompasses the islands of Bermuda...

Improving terrestrial evaporation estimates over continental Australia through assimilation of SMOS soil moisture

Science.gov (United States)

Martens, B.; Miralles, D.; Lievens, H.; Fernández-Prieto, D.; Verhoest, N. E. C.

2016-06-01

Terrestrial evaporation is an essential variable in the climate system that links the water, energy and carbon cycles over land. Despite this crucial importance, it remains one of the most uncertain components of the hydrological cycle, mainly due to known difficulties to model the constraints imposed by land water availability on terrestrial evaporation. The main objective of this study is to assimilate satellite soil moisture observations from the Soil Moisture and Ocean Salinity (SMOS) mission into an existing evaporation model. Our over-arching goal is to find an optimal use of satellite soil moisture that can help to improve our understanding of evaporation at continental scales. To this end, the Global Land Evaporation Amsterdam Model (GLEAM) is used to simulate evaporation fields over continental Australia for the period September 2010-December 2013. SMOS soil moisture observations are assimilated using a Newtonian Nudging algorithm in a series of experiments. Model estimates of surface soil moisture and evaporation are validated against soil moisture probe and eddy-covariance measurements, respectively. Finally, an analogous experiment in which Advanced Microwave Scanning Radiometer (AMSR-E) soil moisture is assimilated (instead of SMOS) allows to perform a relative assessment of the quality of both satellite soil moisture products. Results indicate that the modelled soil moisture from GLEAM can be improved through the assimilation of SMOS soil moisture: the average correlation coefficient between in situ measurements and the modelled soil moisture over the complete sample of stations increased from 0.68 to 0.71 and a statistical significant increase in the correlations is achieved for 17 out of the 25 individual stations. Our results also suggest a higher accuracy of the ascending SMOS data compared to the descending data, and overall higher quality of SMOS compared to AMSR-E retrievals over Australia. On the other hand, the effect of soil moisture data

Assimilation of SMOS Soil Moisture Retrievals in the Land Information System

Science.gov (United States)

Blakenship, Clay; Zavodsky, Bradley; Cae, Jonathan

2014-01-01

Soil moisture is a crucial variable for weather prediction because of its influence on evaporation. It is of critical importance for drought and flood monitoring and prediction and for public health applications. The NASA Short-term Prediction Research and Transition Center (SPoRT) has implemented a new module in the NASA Land Information System (LIS) to assimilate observations from the ESA's Soil Moisture and Ocean Salinity (SMOS) satellite. SMOS Level 2 retrievals from the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS) instrument are assimilated into the Noah LSM within LIS via an Ensemble Kalman Filter. The retrievals have a target volumetric accuracy of 4% at a resolution of 35-50 km. Parallel runs with and without SMOS assimilation are performed with precipitation forcing from intentionally degraded observations, and then validated against a model run using the best available precipitation data, as well as against selected station observations. The goal is to demonstrate how SMOS data assimilation can improve modeled soil states in the absence of dense rain gauge and radar networks.

Neural network retrieval of soil moisture: application to SMOS

Science.gov (United States)

Rodriguez-Fernandez, Nemesio; Richaume, Philippe; Aires, Filipe; Prigent, Catherine; Kerr, Yann; Kolasssa, Jana; Jimenez, Carlos; Cabot, Francois; Mahmoodi, Ali

2014-05-01

We present an efficient statistical soil moisture (SM) retrieval method using SMOS brightness temperatures (BTs) complemented with MODIS NDVI and ASCAT backscattering data. The method is based on a feed-forward neural network (hereafter NN) trained with SM from ECMWF model predictions or from the SMOS operational algorithm. The best compromise to retrieve SM with NNs from SMOS brightness temperatures in a large fraction of the swath (~ 670 km) is to use incidence angles from 25 to 60 degrees (in 7 bins of 5 deg width) for both H and V polarizations. The correlation coefficient (R) of the SM retrieved by the NN and the reference SM dataset (ECMWF or SMOS L3) is 0.8. The correlation coefficient increases to 0.91 when adding as input MODIS NDVI, ECOCLIMAP sand and clay fractions and one of the following data: (i) active microwaves observations (ASCAT backscattering coefficient at 40 deg incidence angle), (ii) ECMWF soil temperature. Finally, the correlation coefficient increases to R=0.94 when using a normalization index computed locally for each latitude-longitude point with the maximum and minimum BTs and the associated SM values from the local time series. Global maps of SM obtained with NNs reproduce well the spatial structures present in the reference SM datasets, implying that the NN works well for a wide range of ecosystems and physical conditions. In addition, the results of the NNs have been evaluated at selected locations for which in situ measurements are available such as the USDA-ARS watersheds (USA), the OzNet network (AUS) and USDA-NRCS SCAN network (USA). The time series of SM obtained with NNs reproduce the temporal behavior measured with in situ sensors. For well known sites where the in situ measurement is representative of a 40 km scale like the Little Washita watershed, the NN models show a very high correlation of (R = 0.8-0.9) and a low standard deviation of 0.02-0.04 m3/m3 with respect to the in situ measurements. When comparing with all the in

Evaluation of SMOS soil moisture products over the CanEx-SM10 area

Science.gov (United States)

The Soil Moisture and Ocean Salinity (SMOS) Earth observation satellite was launched in November 2009 to provide global soil moisture and ocean salinity measurements based on L-Band passive microwave measurements. Since its launch, different versions of SMOS soil moisture products processors have be...

Fresh Water River discharges as observed by SMOS in the Arabian Sea and the Bay of Bengal

Science.gov (United States)

Olmedo, Estrella; Ballabrera-Poy, Joaquim; Turiel, Antonio

2017-04-01

The Bay of Bengal (BoB) and the Arabian Sea (AS) are two peculiar regions in the Indian Ocean exhibiting a wide range of Sea Surface Salinity (SSS) values. In the BoB, the strong summer monsoon rainfall and the continental run-offs into these semi-enclosed basins result in an intense dilution of the surface seawater in the northern part of the Bay, thereby inducing some of the lowest SSS water masses found in the tropical belt. In the AS, because of the intense variability associated with the monsoon cycle, water mass structure in the upper layers of the AS shows enormous variability in the space and time. As such, the role of the salinity in these regions is crucial in the ocean dynamics of these regions. After more than 7 years in orbit, the Soil Moisture and Ocean Salinity (SMOS) mission [1] continues to provide a series of salinity data that could be used to monitor the SSS variations in these climatically relevant regions, provided that systematic errors due to land contamination are reduced. Recently-developed algorithms for SSS retrieval [2] have improved the filtering criteria and the mitigation of the systematic bias, providing coherent SSS retrievals close to the land masses. In this work we have analyzed the SSS in 2-degree boxes located at the mouth of the main rivers in the BoB: Ganges-Brahmaputra, Irrawady, Mahanadi, Godovari; and in the AS: Indus. We have first tried to validate the SMOS salinity retrievals with in situ measurements. Since there is few available in situ data, we have also compared the climatological SSS behavior derived from SMOS with the ones provided by the World Ocean Atlas [3]. We have also compared the SMOS SSS data with historical data of discharges [4] and [5], ocean currents from the Ocean Surface Current Analyses Real-time (OSCAR) [6], Sea Surface Temperature from Operational Sea Surface Temperature and Sea Ice Analysis (OSTIA) [7],[8] and [9] and Chlorophyll data [10]. The conclusion of this work is that, when the proper

RFI detection in SMOS data using 3^rd and 4^th Stokes parameters

DEFF Research Database (Denmark)

Kristensen, Steen Savstrup; Balling, Jan E.; Skou, Niels

2012-01-01

As SMOS data have been found to contain much more RFI than expected, methods for detecting RFI in SMOS data have been pursued. This paper describes a method using 3rd and 4th Stokes parameters for RFI detection in SMOS data. Obvious hot-spots are detected, as well as smaller but still detrimental...

SMOS and SMAP: from Lessons Learned to Future Mission Requirements

Science.gov (United States)

Kerr, Y. H.; Wigneron, J. P.; Cabot, F.; Escorihuela, M. J.; Anterrieu, E.; Rouge, B.; Rodriguez Fernandez, N.; Bindlish, R.; Khazaal, A.; Al-Bitar, A.; Mialon, A.; Lesthievent, G.

2017-12-01

The SMOS (Soil Moisture and Ocean Salinity) satellite was successfully launched in November 2009. This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surface, vegetation water content over land, and ocean salinity. The Soil Moisture and Ocean Salinity mission has now been collecting data for over 7 years. TheSoil Moisture Active and Passive for over 2 years.The two data set have been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS) to be merged into one product, while operational near real time soil moisture data is now available and assimilation of SMOS data in NWP has proved successful. After 7 years of L-Band data acquisition, it seems important to start using data for having a look at anomalies and see how they can relate to large scale events. We have also produced a 15 year soil moisture data set by merging SMOS and AMSR using a neural network approach. The purpose of this communication is to present the two mission results after more than seven years in orbit in a climatic trend perspective, as through such a period anomalies can be detected. Thereby we benefit from consistent datasets provided through the latest reprocessing using most recent algorithm enhancements. Using the above mentioned products it is possible to follow large events such as the evolution of the droughts in North America, or water fraction evolution over the Amazonian basin. In this occasion we will focus on the analysis of SMOS and ancillary products anomalies to reveal two climatic trends, the temporal evolution of water storage over the Indian continent in relation to rainfall anomalies, and the global impact of El Nino types of events on the general water storage distribution. This presentation shows in detail the use of long term data sets of L-band microwave radiometry in two specific cases, namely droughts and water budget over a large basin. Several other analyses are under way currently. Obviously

Origin of Bermuda's clay-rich Quaternary paleosols and their paleoclimatic significance

Science.gov (United States)

Herwitz, S.R.; Muhs, D.R.; Prospero, J.M.; Mahan, S.; Vaughn, B.

1996-01-01

Red clayey paleosols that are chiefly the product of aerosolic dust deposition are interbedded in the Quaternary carbonate formations of the Bermuda oceanic island system. These paleosols provide a basis for reconstructing Quaternary atmospheric circulation patterns in the northwestern Atlantic. Geochemical analyses were performed on representative paleosol samples to identify their parent dust source. Fine-grained fractions were analyzed by energy-dispersive X ray fluorescence to determine trace element (Zr, Y, La, Ti, and Nb) concentrations and to derive geochemical signatures based on immobile element ratios. These ratios were compared with geochemical signatures determined for three possible sources of airborne dust: (1) Great Plains loess, (2) Mississippi River Valley loess, and (3) Saharan dust. The Zr/Y and Zr/La ratios provided the clearest distinction between the hypothesized dust sources. The low ratios in the paleosol B horizons most closely resemble Saharan dust in the the two North American loessial source areas could not be clearly detected. Thus Bermuda paleosols have a predominantly Saharan aerosolic dust signature. Saharan dust deposition on Bermuda during successive Quaternary glacial periods is consistent with patterns of general circulation models, which indicate that during glacial maxima the northeast summer trade winds were stronger than at present and reached latitudes higher than 30 ?? N despite lower-than-present sea surface temperatures in the North Atlantic.

SMOS validation of soil moisture and ocen salinity (SMOS) soil moisture over watershed networks in the U.S.

Science.gov (United States)

Estimation of soil moisture at large scale has been performed using several satellite-based passive microwave sensors and a variety of retrieval methods. The most recent source of soil moisture is the European Space Agency Soil Moisture and Ocean Salinity (SMOS) mission. A thorough validation must b...

Exploiting the synergy between SMAP and SMOS to improve brightness temperature simulations and soil moisture retrievals in arid regions

Science.gov (United States)

Ebrahimi, Mohsen; Alavipanah, Seyed Kazem; Hamzeh, Saeid; Amiraslani, Farshad; Neysani Samany, Najmeh; Wigneron, Jean-Pierre

2018-02-01

The objective of this study was to exploit the synergy between SMOS and SMAP based on vegetation optical depth (VOD) to improve brightness temperature (TB) simulations and land surface soil moisture (SM) retrievals in arid regions of the world. In the current operational algorithm of SMAP (level 2), vegetation water content (VWC) is considered as a proxy to compute VOD which is calculated by an empirical conversion function of NDVI. Avoiding the empirical estimation of VOD, the SMOS algorithm is used to retrieve simultaneously SM and VOD from TB observations. The present study attempted to improve SMAP TB simulations and SM retrievals by benefiting from the advantages of the SMOS (L-MEB) algorithm. This was achieved by using a synergy method based on replacing the default value of SMAP VOD with the retrieved value of VOD from the SMOS multi angular and bi-polarization observations of TB. The insitu SM measurements, used as reference SM in this study, were obtained from the International Soil Moisture Network (ISMN) over 180 stations located in arid regions of the world. Furthermore, four stations were randomly selected to analyze the temporal variations in VOD and SM. Results of the synergy method showed that the accuracy of the TB simulations and SM retrievals was respectively improved at 144 and 124 stations (out of a total of 180 stations) in terms of coefficient of determination (R2) and unbiased root mean squared error (UbRMSE). Analyzing the temporal variations in VOD showed that the SMOS VOD, conversely to the SMAP VOD, can better illustrate the presence of herbaceous plants and may be a better indicator of the seasonal changes in the vegetation density and biomass over the year.

Use of Physio-Hydrological Units for SMOS Validation at the Valencia Anchor Station Study Area

Science.gov (United States)

Millán-Scheiding, C.; Antolín, C.; Marco, J.; Soriano, M. P.; Torre, E.; Requena, F.; Carbó, E.; Cano, A.; Lopez-Baeza, E.

2009-04-01

The SMOS space mission will soil moisture over the continents and ocean surface salinity with the sufficient resolution to be used in global climate change studies. With the aim of validating SMOS land data and products at the Valencia Anchor Station site (VAS) in a Mediterranean Ecosystem area of Spain, we have designed a sample methodology using a subdivision of the landscape in environmental units related to the spatial variability of soil moisture (Millán-Scheiding, 2006; Lopez-Baeza, et al. 2008). These physio-hydrological units are heterogeneously structured entities which present a certain degree of internal uniformity of hydrological parameters. The units are delimited by integrating areas with the same physio-morphology, soil type, vegetation, geology and topography (Flugel, et al 2003; Millán-Scheiding et al, 2007). Each of these units presented over the same pedological characteristics, vegetation cover, and landscape position should have a certain degree of internal uniformity in its hydrological parameters and therefore similar soil moisture (SM). The main assumption for each unit is that the dynamical variation of the hydrological parameters within one unit should be minimum compared to the dynamics of another unit. This methodology will hopefully provide an effective sampling design consisting of a reduced number of measuring points, sparsely distributed over the area, or alternatively, using SM validation networks where each sampling point is located where it is representative of the mean soil moisture of a complete unit area. The Experimental Plan for the SMOS Validation Rehearsal Campaign at the VAS area of April-May 2008 used this environmental subdivision in the selection and sampling of over 21.000 soil moisture points in a control area of 10 x 10 km2. The ground measurements were carried out during 4 nights corresponding to a drying out period of the soil. The sampling consisted of 700 plots with 4 volumetric SM cylinders and 7 Delta-T Theta

Vernon Bermuda Workshop: A Course in Sub-tropical Island Ecology

Science.gov (United States)

Werdell, P. Jeremy

2012-01-01

More than 30 years ago, educators in central Connecticut developed the Vernon Bermuda Workshop as a means of introducing middle- and high-school students to subtropical island ecology. Each year, after months of classroom preparation, approximately 20 top students spend one week at the Bermuda Institute of Ocean Sciences (St. George's, Bermuda) studying the local flora and fauna in both the field and laboratory. The curriculum includes an additional array of activities, ranging from historical and ecological tours to spelunking, and culminates in a series of field-observation-related presentations. I am responsible for the meteorological and oceanographic components of the curriculum. In the field, my students collect time-series of biophysical variables over the course of a day, which they use to interpret diurnal patterns and interactions amongst the variables. I also add remote-sensing and phytoplankton biology components to the curriculum - in previous years, my students have studied time-series of Sea WIFS imagery collected at Bermuda during our trip. I have been an Instructor for this Workshop since 2003. The Workshop provides an outreach activity for GSFC Code 616.

Soil moisture modelling of a SMOS pixel: interest of using the PERSIANN database over the Valencia Anchor Station

Directory of Open Access Journals (Sweden)

S. Juglea

2010-08-01

Full Text Available In the framework of Soil Moisture and Ocean Salinity (SMOS Calibration/Validation (Cal/Val activities, this study addresses the use of the PERSIANN-CCS¹database in hydrological applications to accurately simulate a whole SMOS pixel by representing the spatial and temporal heterogeneity of the soil moisture fields over a wide area (50×50 km². The study focuses on the Valencia Anchor Station (VAS experimental site, in Spain, which is one of the main SMOS Cal/Val sites in Europe.

A faithful representation of the soil moisture distribution at SMOS pixel scale (50×50 km² requires an accurate estimation of the amount and temporal/spatial distribution of precipitation. To quantify the gain of using the comprehensive PERSIANN database instead of sparsely distributed rain gauge measurements, comparisons between in situ observations and satellite rainfall data are done both at point and areal scale. An overestimation of the satellite rainfall amounts is observed in most of the cases (about 66% but the precipitation occurrences are in general retrieved (about 67%.

To simulate the high variability in space and time of surface soil moisture, a Soil Vegetation Atmosphere Transfer (SVAT model – ISBA (Interactions between Soil Biosphere Atmosphere is used. The interest of using satellite rainfall estimates as well as the influence that the precipitation events can induce on the modelling of the water content in the soil is depicted by a comparison between different soil moisture data. Point-like and spatialized simulated data using rain gauge observations or PERSIANN – CCS database as well as ground measurements are used. It is shown that a good adequacy is reached in most part of the year, the precipitation differences having less impact upon the simulated soil moisture. The behaviour of simulated surface soil moisture at SMOS scale is verified by the use of remote sensing data from the Advanced

Assessment of SMOS Soil Moisture Retrieval Parameters Using Tau-Omega Algorithms for Soil Moisture Deficit Estimation

Science.gov (United States)

Srivastava, Prashant K.; Han, Dawei; Rico-Ramirez, Miguel A.; O'Neill, Peggy; Islam, Tanvir; Gupta, Manika

2014-01-01

Soil Moisture and Ocean Salinity (SMOS) is the latest mission which provides flow of coarse resolution soil moisture data for land applications. However, the efficient retrieval of soil moisture for hydrological applications depends on optimally choosing the soil and vegetation parameters. The first stage of this work involves the evaluation of SMOS Level 2 products and then several approaches for soil moisture retrieval from SMOS brightness temperature are performed to estimate Soil Moisture Deficit (SMD). The most widely applied algorithm i.e. Single channel algorithm (SCA), based on tau-omega is used in this study for the soil moisture retrieval. In tau-omega, the soil moisture is retrieved using the Horizontal (H) polarisation following Hallikainen dielectric model, roughness parameters, Fresnel's equation and estimated Vegetation Optical Depth (tau). The roughness parameters are empirically calibrated using the numerical optimization techniques. Further to explore the improvement in retrieval models, modifications have been incorporated in the algorithms with respect to the sources of the parameters, which include effective temperatures derived from the European Center for Medium-Range Weather Forecasts (ECMWF) downscaled using the Weather Research and Forecasting (WRF)-NOAH Land Surface Model and Moderate Resolution Imaging Spectroradiometer (MODIS) land surface temperature (LST) while the s is derived from MODIS Leaf Area Index (LAI). All the evaluations are performed against SMD, which is estimated using the Probability Distributed Model following a careful calibration and validation integrated with sensitivity and uncertainty analysis. The performance obtained after all those changes indicate that SCA-H using WRF-NOAH LSM downscaled ECMWF LST produces an improved performance for SMD estimation at a catchment scale.

Population Structure of Montastraea cavernosa on Shallow versus Mesophotic Reefs in Bermuda

Science.gov (United States)

Goodbody-Gringley, Gretchen; Marchini, Chiara; Chequer, Alex D.; Goffredo, Stefano

2015-01-01

Mesophotic coral reef ecosystems remain largely unexplored with only limited information available on taxonomic composition, abundance and distribution. Yet, mesophotic reefs may serve as potential refugia for shallow-water species and thus understanding biodiversity, ecology and connectivity of deep reef communities is integral for resource management and conservation. The Caribbean coral, Montastraea cavernosa, is considered a depth generalist and is commonly found at mesophotic depths. We surveyed abundance and size-frequency of M. cavernosa populations at six shallow (10m) and six upper mesophotic (45m) sites in Bermuda and found population structure was depth dependent. The mean surface area of colonies at mesophotic sites was significantly smaller than at shallow sites, suggesting that growth rates and maximum colony surface area are limited on mesophotic reefs. Colony density was significantly higher at mesophotic sites, however, resulting in equal contributions to overall percent cover. Size-frequency distributions between shallow and mesophotic sites were also significantly different with populations at mesophotic reefs skewed towards smaller individuals. Overall, the results of this study provide valuable baseline data on population structure, which indicate that the mesophotic reefs of Bermuda support an established population of M. cavernosa. PMID:26544963

Radiobrightness validation on different spatial scales during the SMOS validation campaign 2010 in the Rur catchment, germany

DEFF Research Database (Denmark)

Montzka, C.; Bogena, H.; Weihermueller, L.

2011-01-01

aircraft as well as ground- based mobile measurements with the JULBARA radiometer mounted on a truck are analyzed in a qualitative comparison for different crop stands. These data can be used for validation of the SMOS sensor by giving valuable information about parameters for the radiative transfer......ESA's Soil Moisture and Ocean Salinity (SMOS) mission has been launched in November 2009 and delivers now brightness temperature and soil moisture products over terrestrial areas on a regular three day basis. In 2010 several airborne campaigns were conducted to validate the SMOS products...

A Novel Bias Correction Method for Soil Moisture and Ocean Salinity (SMOS Soil Moisture: Retrieval Ensembles

Directory of Open Access Journals (Sweden)

Ju Hyoung Lee

2015-12-01

Full Text Available Bias correction is a very important pre-processing step in satellite data assimilation analysis, as data assimilation itself cannot circumvent satellite biases. We introduce a retrieval algorithm-specific and spatially heterogeneous Instantaneous Field of View (IFOV bias correction method for Soil Moisture and Ocean Salinity (SMOS soil moisture. To the best of our knowledge, this is the first paper to present the probabilistic presentation of SMOS soil moisture using retrieval ensembles. We illustrate that retrieval ensembles effectively mitigated the overestimation problem of SMOS soil moisture arising from brightness temperature errors over West Africa in a computationally efficient way (ensemble size: 12, no time-integration. In contrast, the existing method of Cumulative Distribution Function (CDF matching considerably increased the SMOS biases, due to the limitations of relying on the imperfect reference data. From the validation at two semi-arid sites, Benin (moderately wet and vegetated area and Niger (dry and sandy bare soils, it was shown that the SMOS errors arising from rain and vegetation attenuation were appropriately corrected by ensemble approaches. In Benin, the Root Mean Square Errors (RMSEs decreased from 0.1248 m3/m3 for CDF matching to 0.0678 m3/m3 for the proposed ensemble approach. In Niger, the RMSEs decreased from 0.14 m3/m3 for CDF matching to 0.045 m3/m3 for the ensemble approach.

Bermuda Tsunami Forecast Grids for MOST Model

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Bermuda Forecast Model Grids provides bathymetric data strictly for tsunami inundation modeling with the Method of Splitting Tsunami (MOST) model. MOST is a...

Ocean time-series near Bermuda: Hydrostation S and the US JGOFS Bermuda Atlantic time-series study

Science.gov (United States)

Michaels, Anthony F.; Knap, Anthony H.

1992-01-01

Bermuda is the site of two ocean time-series programs. At Hydrostation S, the ongoing biweekly profiles of temperature, salinity and oxygen now span 37 years. This is one of the longest open-ocean time-series data sets and provides a view of decadal scale variability in ocean processes. In 1988, the U.S. JGOFS Bermuda Atlantic Time-series Study began a wide range of measurements at a frequency of 14-18 cruises each year to understand temporal variability in ocean biogeochemistry. On each cruise, the data range from chemical analyses of discrete water samples to data from electronic packages of hydrographic and optics sensors. In addition, a range of biological and geochemical rate measurements are conducted that integrate over time-periods of minutes to days. This sampling strategy yields a reasonable resolution of the major seasonal patterns and of decadal scale variability. The Sargasso Sea also has a variety of episodic production events on scales of days to weeks and these are only poorly resolved. In addition, there is a substantial amount of mesoscale variability in this region and some of the perceived temporal patterns are caused by the intersection of the biweekly sampling with the natural spatial variability. In the Bermuda time-series programs, we have added a series of additional cruises to begin to assess these other sources of variation and their impacts on the interpretation of the main time-series record. However, the adequate resolution of higher frequency temporal patterns will probably require the introduction of new sampling strategies and some emerging technologies such as biogeochemical moorings and autonomous underwater vehicles.

Surveys and Analysis of RFI in Preparation for SMOS: Results from Airborne Campaigns and First Impressions from Satellite Data

DEFF Research Database (Denmark)

Balling, Jan E.; Kristensen, Steen Savstrup; Søbjærg, Sten Schmidl

2011-01-01

Several soil moisture and sea salinity campaigns, including airborne L-band radiometer measurements, have been carried out in preparation for the European Space Agency Soil Moisture and Ocean Salinity (SMOS) mission. The radiometer used in this context is fully polarimetric and is capable......, other detection methods have been investigated as well. In particular, inspection of the third and fourth Stokes parameters shows promising results—possibly as a complement to the kurtosis method. The kurtosis method, however, cannot be used with SMOS data. Since SMOS is fully polarimetric, the third...... and fourth Stokes parameter method is an option, and a first assessment using a fully polarimetric SMOS data set looks promising. Finally, a variable incidence angle signature algorithm is introduced, and the possibility of using this as an RFI indicator is discussed....

Surveys and Analysis of RFI in The Smos Context

DEFF Research Database (Denmark)

Skou, Niels; Balling, Jan E.; Søbjærg, Sten Schmidl

2010-01-01

Several soil moisture and sea salinity campaigns, including airborne L-band radiometer measurements, have been carried out in preparation for the ESA Soil Moisture and Ocean Salinity (SMOS) mission. The radiometer used in this context is fully polarimetric and is capable of detecting Radio...

Analyzing the 2010-2011 La Niña signature in the tropical Pacific sea surface salinity using in situ data, SMOS observations, and a numerical simulation

Science.gov (United States)

Hasson, Audrey; Delcroix, Thierry; Boutin, Jacqueline; Dussin, Raphael; Ballabrera-Poy, Joaquim

2014-06-01

The tropical Pacific Ocean remained in a La Niña phase from mid-2010 to mid-2012. In this study, the 2010-2011 near-surface salinity signature of ENSO (El Niño-Southern Oscillation) is described and analyzed using a combination of numerical model output, in situ data, and SMOS satellite salinity products. Comparisons of all salinity products show a good agreement between them, with a RMS error of 0.2-0.3 between the thermosalinograph (TSG) and SMOS data and between the TSG and model data. The last 6 months of 2010 are characterized by an unusually strong tripolar anomaly captured by the three salinity products in the western half of the tropical Pacific. A positive SSS anomaly sits north of 10°S (>0.5), a negative tilted anomaly lies between 10°S and 20°S and a positive one south of 20°S. In 2011, anomalies shift south and amplify up to 0.8, except for the one south of 20°S. Equatorial SSS changes are mainly the result of anomalous zonal advection, resulting in negative anomalies during El Niño (early 2010), and positive ones thereafter during La Niña. The mean seasonal and interannual poleward drift exports those anomalies toward the south in the southern hemisphere, resulting in the aforementioned tripolar anomaly. The vertical salinity flux at the bottom of the mixed layer tends to resist the surface salinity changes. The observed basin-scale La Niña SSS signal is then compared with the historical 1998-1999 La Niña event using both observations and modeling.

Bermuda as an evolutionary life raft for an ancient lineage of endangered lizards.

Directory of Open Access Journals (Sweden)

Matthew C Brandley

Full Text Available Oceanic islands are well known for harboring diverse species assemblages and are frequently the basis of research on adaptive radiation and neoendemism. However, a commonly overlooked role of some islands is their function in preserving ancient lineages that have become extinct everywhere else (paleoendemism. The island archipelago of Bermuda is home to a single species of extant terrestrial vertebrate, the endemic skink Plestiodon (formerly Eumeces longirostris. The presence of this species is surprising because Bermuda is an isolated, relatively young oceanic island approximately 1000 km from the eastern United States. Here, we apply Bayesian phylogenetic analyses using a relaxed molecular clock to demonstrate that the island of Bermuda, although no older than two million years, is home to the only extant representative of one of the earliest mainland North American Plestiodon lineages, which diverged from its closest living relatives 11.5 to 19.8 million years ago. This implies that, within a short geological time frame, mainland North American ancestors of P. longirostris colonized the recently emergent Bermuda and the entire lineage subsequently vanished from the mainland. Thus, our analyses reveal that Bermuda is an example of a "life raft" preserving millions of years of unique evolutionary history, now at the brink of extinction. Threats such as habitat destruction, littering, and non-native species have severely reduced the population size of this highly endangered lizard.

Assimilation of SMOS-derived soil moisture in a fully integrated hydrological and soil-vegetation-atmosphere transfer model in Western Denmark

DEFF Research Database (Denmark)

Ridler, Marc-Etienne Francois; Madsen, Henrik; Stisen, Simon

2014-01-01

-derived soil moisture assimilation in a catchment scale model is typically restricted by two challenges: (1) passive microwave is too coarse for direct assimilation and (2) the data tend to be biased. The solution proposed in this study is to disaggregate the SMOS bias using a higher resolution land cover...... classification map that was derived from Landsat thermal images. Using known correlations between SMOS bias and vegetation type, the assimilation filter is adapted to calculate biases online, using an initial bias estimate. Real SMOS-derived soil moisture is assimilated in a precalibrated catchment model...

Naise võim Bermudas : kubjas kukutati / Allan Espenberg

Index Scriptorium Estoniae

Espenberg, Allan

2003-01-01

Suurbritanniale kuuluva Bermuda saare parlamendivalimised vallandasid sündmuste ahela, mis võivad muuta asumaa poliitikat. Ametist tagandati peaminister Jennifer Meredith Smith ja uueks peaministriks sai senine tööminister William Alexander Scott

RFI and SMOS: Preparatory campaigns and first observations from space

DEFF Research Database (Denmark)

Balling, Jan E.; Søbjærg, Sten Schmidl; Kristensen, Steen Savstrup

2010-01-01

In support of the ESA Soil Moisture and Ocean Salinity (SMOS) mission, a number of campaigns, including airborne L-band radiometer measurements, have been carried out. The radiometer used in this context is fully polarimetric and has built-in Radio Frequency Interference (RFI) detection...

An Octave/MATLAB® Interface for Rapid Processing of SMOS L1C Full Polarization Brightness Temperature

Directory of Open Access Journals (Sweden)

Pablo Saavedra

2018-01-01

Full Text Available A tool to process the SMOS microwave radiometer level 1C polarized brightness temperatures data product has been developed. The SMOS L1C science product contains the dual and full (Stokes vector polarization brightness temperatures at L-band for multiple incidence angles. In order to use the L1C product, the measurements are processed by a number of procedures including radio frequency interference (RFI filters, conversion of the polarization plane from the antenna (X- & Y-pol to the Earth’s surface frame (H- & V-pol, and averaging to fixed classes of incidence angles. The software allows for the processing of data for the entire daily half-orbit product, or for specific regions of interest, and can be adapted as a bash-job to process a large number of data files e.g. for time series analysis. This paper describes the tool which was developed in GNU C++ with the capability to be compiled as MEX function to work with Octave or MATLAB® without any source code adjustment. Funding statement: 'Deutsche Forschungsgemeinschaft' DFG under grant number SI 606/24-1.

Molecular characterization of vancomycin-resistant Enterococcus faecium isolates from Bermuda.

Directory of Open Access Journals (Sweden)

Patrick Eberechi Akpaka

Full Text Available Molecular characteristics of vancomycin resistant enterococci isolates from Bermuda Island is currently unknown. This study was conducted to investigate phenotypic and genotypic characteristics of VRE isolates from Bermuda Island using the chromogenic agar, E-tests, polymerase chain reaction (PCR, pulsed-field gel electrophoresis (PFGE and multilocus sequence typing (MLST. Eighteen E. faecium isolates were completely analyzed and were all resistant to vancomycin, susceptible to linezolid and quinupristin/dalfopristin, positive for vanA and esp genes. The MLST analysis confirmed most isolates were of the sequence types linked to clonal complex 17 (CC17 that is widely associated with outbreaks in hospitals. Infection control measures, antibiotic stewardship, and surveillance activities will continue to be a priority in hospital on the Island.

Evaluation of molecular basis of cross reactivity between rye and Bermuda grass pollen allergens.

Science.gov (United States)

Tiwari, Ruby; Bhalla, Prem L; Singh, Mohan B

2009-12-01

Allergenic cross reactivity between the members of the Pooids (Lolium perenne, Phleum pratense, and Poa pratensis) and Chloridoids (Cynodon dactylon and Paspalum notatum) is well established. Studies using crude extracts in the past have demonstrated limited cross reactivity between the Pooids and the Chloridoids suggesting separate diagnosis and therapy. However, little is known regarding the molecular basis for the limited cross reactivity observed between the 2 groups of grasses. The present study was undertaken to gain insights into the molecular basis of cross allergenicity between the major allergens from rye and Bermuda grass pollens. Immunoblot inhibition tests were carried out to determine the specificity of the proteins involved in cross reactivity. Crude pollen extract and bacterially expressed and purified recombinant Lol p 1and Lol p 5 from rye grass were subjected to cross inhibition experiments with crude and purified recombinant Cyn d 1 from Bermuda grass using sera from patients allergic to rye grass pollen. The immunoblot inhibition studies revealed a high degree of cross inhibition between the group 1 allergens. In contrast, a complete lack of inhibition was observed between Bermuda grass group 1 allergen rCyn d 1, and rye grass group 5 allergen rLol p 5. Crude rye grass extract strongly inhibited IgE reactivity to Bermuda grass, whereas crude Bermuda grass pollen extract showed a weaker inhibition. Our data suggests that a possible explanation for the limited cross reactivity between the Pooids and Chloridoids may, in part, be due to the absence of group 5 allergen from Chloridoid grasses. This approach of using purified proteins may be applied to better characterize the cross allergenicity patterns between different grass pollen allergens.

Disaggregation of SMOS soil moisture over West Africa using the Temperature and Vegetation Dryness Index based on SEVIRI land surface parameters

DEFF Research Database (Denmark)

Tagesson, T.; Horion, S.; Nieto, H.

2018-01-01

the Temperature and Vegetation Dryness Index (TVDI) that served as SM proxy within the disaggregation process. West Africa (3 N, 26 W; 28 N, 26 E) was selected as a case study as it presents both an important North-South climate gradient and a diverse range of ecosystem types. The main challenge was to set up...... resolution of SMOS SM, with potential application for local drought/flood monitoring of importance for the livelihood of the population of West Africa....

The global SMOS Level 3 daily soil moisture and brightness temperature maps

Directory of Open Access Journals (Sweden)

A. Al Bitar

2017-06-01

Full Text Available The objective of this paper is to present the multi-orbit (MO surface soil moisture (SM and angle-binned brightness temperature (TB products for the SMOS (Soil Moisture and Ocean Salinity mission based on a new multi-orbit algorithm. The Level 3 algorithm at CATDS (Centre Aval de Traitement des Données SMOS makes use of MO retrieval to enhance the robustness and quality of SM retrievals. The motivation of the approach is to make use of the longer temporal autocorrelation length of the vegetation optical depth (VOD compared to the corresponding SM autocorrelation in order to enhance the retrievals when an acquisition occurs at the border of the swath. The retrieval algorithm is implemented in a unique operational processor delivering multiple parameters (e.g. SM and VOD using multi-angular dual-polarisation TB from MO. A subsidiary angle-binned TB product is provided. In this study the Level 3 TB V310 product is showcased and compared to SMAP (Soil Moisture Active Passive TB. The Level 3 SM V300 product is compared to the single-orbit (SO retrievals from the Level 2 SM processor from ESA with aligned configuration. The advantages and drawbacks of the Level 3 SM product (L3SM are discussed. The comparison is done on a global scale between the two datasets and on the local scale with respect to in situ data from AMMA-CATCH and USDA ARS Watershed networks. The results obtained from the global analysis show that the MO implementation enhances the number of retrievals: up to 9 % over certain areas. The comparison with the in situ data shows that the increase in the number of retrievals does not come with a decrease in quality, but rather at the expense of an increased time lag in product availability from 6 h to 3.5 days, which can be a limiting factor for applications like flood forecast but reasonable for drought monitoring and climate change studies. The SMOS L3 soil moisture and L3 brightness temperature products are delivered using an

Comparison of soil moisture retrieval algorithms based on the synergy between SMAP and SMOS-IC

Science.gov (United States)

Ebrahimi-Khusfi, Mohsen; Alavipanah, Seyed Kazem; Hamzeh, Saeid; Amiraslani, Farshad; Neysani Samany, Najmeh; Wigneron, Jean-Pierre

2018-05-01

This study was carried out to evaluate possible improvements of the soil moisture (SM) retrievals from the SMAP observations, based on the synergy between SMAP and SMOS. We assessed the impacts of the vegetation and soil roughness parameters on SM retrievals from SMAP observations. To do so, the effects of three key input parameters including the vegetation optical depth (VOD), effective scattering albedo (ω) and soil roughness (HR) parameters were assessed with the emphasis on the synergy with the VOD product derived from SMOS-IC, a new and simpler version of the SMOS algorithm, over two years of data (April 2015 to April 2017). First, a comprehensive comparison of seven SM retrieval algorithms was made to find the best one for SM retrievals from the SMAP observations. All results were evaluated against in situ measurements over 548 stations from the International Soil Moisture Network (ISMN) in terms of four statistical metrics: correlation coefficient (R), root mean square error (RMSE), bias and unbiased RMSE (UbRMSE). The comparison of seven SM retrieval algorithms showed that the dual channel algorithm based on the additional use of the SMOS-IC VOD product (selected algorithm) led to the best results of SM retrievals over 378, 399, 330 and 271 stations (out of a total of 548 stations) in terms of R, RMSE, UbRMSE and both R & UbRMSE, respectively. Moreover, comparing the measured and retrieved SM values showed that this synergy approach led to an increase in median R value from 0.6 to 0.65 and a decrease in median UbRMSE from 0.09 m3/m3 to 0.06 m3/m3. Second, using the algorithm selected in a first step and defined above, the ω and HR parameters were calibrated over 218 rather homogenous ISMN stations. 72 combinations of various values of ω and HR were used for the calibration over different land cover classes. In this calibration process, the optimal values of ω and HR were found for the different land cover classes. The obtained results indicated that the

Genetic ancestry and indigenous heritage in a Native American descendant community in Bermuda.

Science.gov (United States)

Gaieski, Jill B; Owings, Amanda C; Vilar, Miguel G; Dulik, Matthew C; Gaieski, David F; Gittelman, Rachel M; Lindo, John; Gau, Lydia; Schurr, Theodore G

2011-11-01

Discovered in the early 16th century by European colonists, Bermuda is an isolated set of islands located in the mid-Atlantic. Shortly after its discovery, Bermuda became the first English colony to forcibly import its labor by trafficking in enslaved Africans, white ethnic minorities, and indigenous Americans. Oral traditions circulating today among contemporary tribes from the northeastern United States recount these same events, while, in Bermuda, St. David's Islanders consider their histories to be linked to a complex Native American, European, and African past. To investigate the influence of historical events on biological ancestry and native cultural identity, we analyzed genetic variation in 111 members of Bermuda's self-proclaimed St. David's Island Native Community. Our results reveal that the majority of mitochondrial DNA (mtDNA) and Y-chromosome haplotypes are of African and West Eurasian origin. However, unlike other English-speaking New World colonies, most African mtDNA haplotypes appear to derive from central and southeast Africa, reflecting the extent of maritime activities in the region. In light of genealogical and oral historical data from the St. David's community, the low frequency of Native American mtDNA and NRY lineages may reflect the influence of genetic drift, the demographic impact of European colonization, and historical admixture with persons of non-native backgrounds, which began with the settlement of the islands. By comparing the genetic data with genealogical and historical information, we are able to reconstruct the complex history of this Bermudian community, which is unique among New World populations. Copyright © 2011 Wiley-Liss, Inc.

CoSMOS: Performance of Kurtosis Algorithm for Radio Frequency Interference Detection and Mitigation

DEFF Research Database (Denmark)

Misra, Sidharth; Kristensen, Steen Savstrup; Skou, Niels

2007-01-01

The performance of a previously developed algorithm for Radio Frequency Interference (RFI) detection and mitigation is experimentally evaluated. Results obtained from CoSMOS, an airborne campaign using a fully polarimetric L-band radiometer are analyzed for this purpose. Data is collected using two...

Rainfall estimation by inverting SMOS soil moisture estimates: A comparison of different methods over Australia

Science.gov (United States)

Brocca, Luca; Pellarin, Thierry; Crow, Wade T.; Ciabatta, Luca; Massari, Christian; Ryu, Dongryeol; Su, Chun-Hsu; Rüdiger, Christoph; Kerr, Yann

2016-10-01

Remote sensing of soil moisture has reached a level of maturity and accuracy for which the retrieved products can be used to improve hydrological and meteorological applications. In this study, the soil moisture product from the Soil Moisture and Ocean Salinity (SMOS) satellite is used for improving satellite rainfall estimates obtained from the Tropical Rainfall Measuring Mission multisatellite precipitation analysis product (TMPA) using three different "bottom up" techniques: SM2RAIN, Soil Moisture Analysis Rainfall Tool, and Antecedent Precipitation Index Modification. The implementation of these techniques aims at improving the well-known "top down" rainfall estimate derived from TMPA products (version 7) available in near real time. Ground observations provided by the Australian Water Availability Project are considered as a separate validation data set. The three algorithms are calibrated against the gauge-corrected TMPA reanalysis product, 3B42, and used for adjusting the TMPA real-time product, 3B42RT, using SMOS soil moisture data. The study area covers the entire Australian continent, and the analysis period ranges from January 2010 to November 2013. Results show that all the SMOS-based rainfall products improve the performance of 3B42RT, even at daily time scale (differently from previous investigations). The major improvements are obtained in terms of estimation of accumulated rainfall with a reduction of the root-mean-square error of more than 25%. Also, in terms of temporal dynamic (correlation) and rainfall detection (categorical scores) the SMOS-based products provide slightly better results with respect to 3B42RT, even though the relative performance between the methods is not always the same. The strengths and weaknesses of each algorithm and the spatial variability of their performances are identified in order to indicate the ways forward for this promising research activity. Results show that the integration of bottom up and top down approaches

Spatio-temporal Root Zone Soil Moisture Estimation for Indo - Gangetic Basin from Satellite Derived (AMSR-2 and SMOS) Surface Soil Moisture

Science.gov (United States)

Sure, A.; Dikshit, O.

2017-12-01

Root zone soil moisture (RZSM) is an important element in hydrology and agriculture. The estimation of RZSM provides insight in selecting the appropriate crops for specific soil conditions (soil type, bulk density, etc.). RZSM governs various vadose zone phenomena and subsequently affects the groundwater processes. With various satellite sensors dedicated to estimating surface soil moisture at different spatial and temporal resolutions, estimation of soil moisture at root zone level for Indo - Gangetic basin which inherits complex heterogeneous environment, is quite challenging. This study aims at estimating RZSM and understand its variation at the level of Indo - Gangetic basin with changing land use/land cover, topography, crop cycles, soil properties, temperature and precipitation patterns using two satellite derived soil moisture datasets operating at distinct frequencies with different principles of acquisition. Two surface soil moisture datasets are derived from AMSR-2 (6.9 GHz - `C' Band) and SMOS (1.4 GHz - `L' band) passive microwave sensors with coarse spatial resolution. The Soil Water Index (SWI), accounting for soil moisture from the surface, is derived by considering a theoretical two-layered water balance model and contributes in ascertaining soil moisture at the vadose zone. This index is evaluated against the widely used modelled soil moisture dataset of GLDAS - NOAH, version 2.1. This research enhances the domain of utilising the modelled soil moisture dataset, wherever the ground dataset is unavailable. The coupling between the surface soil moisture and RZSM is analysed for two years (2015-16), by defining a parameter T, the characteristic time length. The study demonstrates that deriving an optimal value of T for estimating SWI at a certain location is a function of various factors such as land, meteorological, and agricultural characteristics.

Evaluating soil moisture retrievals from ESA’s SMOS and NASA’s SMAP brightness temperature datasets

Science.gov (United States)

Al-Yaari, A.; Wigneron, J.-P.; Kerr, Y.; Rodriguez-Fernandez, N.; O’Neill, P. E.; Jackson, T. J.; De Lannoy, G.J.M.; Al Bitar, A; Mialon, A.; Richaume, P.; Walker, JP; Mahmoodi, A.; Yueh, S.

2018-01-01

Two satellites are currently monitoring surface soil moisture (SM) using L-band observations: SMOS (Soil Moisture and Ocean Salinity), a joint ESA (European Space Agency), CNES (Centre national d’études spatiales), and CDTI (the Spanish government agency with responsibility for space) satellite launched on November 2, 2009 and SMAP (Soil Moisture Active Passive), a National Aeronautics and Space Administration (NASA) satellite successfully launched in January 2015. In this study, we used a multilinear regression approach to retrieve SM from SMAP data to create a global dataset of SM, which is consistent with SM data retrieved from SMOS. This was achieved by calibrating coefficients of the regression model using the CATDS (Centre Aval de Traitement des Données) SMOS Level 3 SM and the horizontally and vertically polarized brightness temperatures (TB) at 40° incidence angle, over the 2013 – 2014 period. Next, this model was applied to SMAP L3 TB data from Apr 2015 to Jul 2016. The retrieved SM from SMAP (referred to here as SMAP_Reg) was compared to: (i) the operational SMAP L3 SM (SMAP_SCA), retrieved using the baseline Single Channel retrieval Algorithm (SCA); and (ii) the operational SMOSL3 SM, derived from the multiangular inversion of the L-MEB model (L-MEB algorithm) (SMOSL3). This inter-comparison was made against in situ soil moisture measurements from more than 400 sites spread over the globe, which are used here as a reference soil moisture dataset. The in situ observations were obtained from the International Soil Moisture Network (ISMN; https://ismn.geo.tuwien.ac.at/) in North of America (PBO_H2O, SCAN, SNOTEL, iRON, and USCRN), in Australia (Oznet), Africa (DAHRA), and in Europe (REMEDHUS, SMOSMANIA, FMI, and RSMN). The agreement was analyzed in terms of four classical statistical criteria: Root Mean Squared Error (RMSE), Bias, Unbiased RMSE (UnbRMSE), and correlation coefficient (R). Results of the comparison of these various products with in

SMOS brightness temperature assimilation into the Community Land Model

Directory of Open Access Journals (Sweden)

D. Rains

2017-11-01

Full Text Available SMOS (Soil Moisture and Ocean Salinity mission brightness temperatures at a single incident angle are assimilated into the Community Land Model (CLM across Australia to improve soil moisture simulations. Therefore, the data assimilation system DasPy is coupled to the local ensemble transform Kalman filter (LETKF as well as to the Community Microwave Emission Model (CMEM. Brightness temperature climatologies are precomputed to enable the assimilation of brightness temperature anomalies, making use of 6 years of SMOS data (2010–2015. Mean correlation R with in situ measurements increases moderately from 0.61 to 0.68 (11 % for upper soil layers if the root zone is included in the updates. A reduced improvement of 5 % is achieved if the assimilation is restricted to the upper soil layers. Root-zone simulations improve by 7 % when updating both the top layers and root zone, and by 4 % when only updating the top layers. Mean increments and increment standard deviations are compared for the experiments. The long-term assimilation impact is analysed by looking at a set of quantiles computed for soil moisture at each grid cell. Within hydrological monitoring systems, extreme dry or wet conditions are often defined via their relative occurrence, adding great importance to assimilation-induced quantile changes. Although still being limited now, longer L-band radiometer time series will become available and make model output improved by assimilating such data that are more usable for extreme event statistics.

Understanding the Steric Height Long Term Variability at the Bermuda Atlantic Time-Series Study (BATS) Site with a Neutral Density Approach

Science.gov (United States)

Goncalves Neto, A.; Johnson, R. J.; Bates, N. R.

2016-02-01

Rising sea level is one of the main concerns for human life in a scenario with global atmosphere and ocean warming, which is of particular concern for oceanic islands. Bermuda, located in the center of the Sargasso Sea, provides an ideal location to investigate sea level rise since it has a long term tide gauge (1933-present) and is in close proximity to deep ocean time-series sites, namely, Hydrostation `S' (1954-present) and the Bermuda Atlantic Time-Series Study site (1988-present). In this study, we use the monthly CTD deep casts at BATS to compute the contribution of steric height (SH) to the local sea surface height (SSH) for the past 24 years. To determine the relative contribution from the various water masses we first define 8 layers (Surface Layer, Upper Thermocline, Subtropical Mode-Water, Lower Thermocline, Antarctic Intermediate Water, Labrador Sea Water, Iceland-Scotland Overflow Water, Denmark Strait Overflow Water) based on neutral density criteria for which SH is computed. Additionally, we calculate the thermosteric and halosteric components for each of the defined neutral density layers. Surprisingly, the results show that, despite a 3.3mm/yr sea level rise observed at the Bermuda tide gauge, the steric contribution to the SSH at BATS has decreased at a rate of -1.1mm/yr during the same period. The thermal component is found to account for the negative trend in the steric height (-4.4mm/yr), whereas the halosteric component (3.3mm/yr) partially compensates the thermal signal and can be explained by an overall cooling and freshening at the BATS site. Although the surface layer and the upper thermocline waters are warming, all the subtropical and polar water masses, which represent most of the local water column, are cooling and therefore drive the overall SH contribution to the local SSH. Hence, it suggests that the mass contribution to the local SSH plays an important role in the sea level rise, for which we investigate with GRACE data.

Estimation of Surface Runoff in the Jucar River Basin from Rainfall Data and SMOS Soil Moisture

Science.gov (United States)

Garcia Leal, Julio A.; Estrela, Teodoro; Fidalgo, Arancha; Gabaldo, Onofre; Gonzalez Robles, Maura; Herrera Daza, Eddy; Khodayar, Samiro; Lopez-Baeza, Ernesto

2013-04-01

SMOS soil moisture values available at the closest DGG node immediately after saturation produced by the rain. The results are shown as maps of precipitation and soil moisture obtained using a V4 integration method between a linear and nearest neighbour methods. Surface runoff maps are consequently obtained using the SCS-CN equation given earlier. These results have also been compared to COSMO-CLM model simulations for the same periods. It is envisaged to obtain precipitation maps from MSG-SEVIRI data.

Bermuda Deep Water Caves 2011: Dives of Discovery between 20110607 and 20110627

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — During the three week NOAA Ocean Exploration project, Bermuda Deep Water Caves 2011: Dives of Discovery, our four member deep team, aided by numerous assistants,...

Elevated temperatures and bleaching on a high latitude coral reef: the 1988 Bermuda event

Science.gov (United States)

Cook, Clayton B.; Logan, Alan; Ward, Jack; Luckhurst, Brian; Berg, Carl J.

1990-03-01

Sea temperatures were normal in Bermuda during 1987, when Bermuda escaped the episodes of coral bleaching which were prevalent throughout the Caribbean region. Survey transecs in 1988 on 4 6 m reefs located on the rim margin and on a lagoonal patch reef revealed bleaching only of zoanthids between May and July. Transect and tow surveys in August and September revealed bleaching of several coral species; Millepora alcicornis on rim reefs was the most extensively affected. The frequency of bleaching in this species, Montastrea annularis and perhaps Diploria labyrinthiformis was significantly higher on outer reefs than on inshore reefs. This bleaching period coincided with the longest period of elevated sea temperatures in Bermuda in 38 years (28.9 30.9°C inshore, >28° offshore). By December, when temperatures had returned to normal, bleaching of seleractinians continued, but bleaching of M. alcicornis on the outer reefs was greatly reduced. Our observations suggest that corals which normally experience wide temperature ranges are less sensitive to thermal stress, and that high-latitude reef corals are sensitive to elevated temperatures which are within the normal thermal range of corals at lower latitudes.

BERMUDA-1DG: a one-dimensional photon transport code

International Nuclear Information System (INIS)

Suzuki, Tomoo; Hasegawa, Akira; Nakashima, Hiroshi; Kaneko, Kunio.

1984-10-01

A one-dimensional photon transport code BERMUDA-1DG has been developed for spherical and infinite slab geometries. The purpose of development is to equip the function of gamma rays calculation for the BERMUDA code system, which was developed by 1983 only for neutron transport calculation as a preliminary version. A group constants library has been prepared for 30 nuclides, and it now consists of the 36-group total cross sections and secondary gamma ray yields by the 120-group neutron flux. For the Compton scattering, group-angle transfer matrices are accurately obtained by integrating the Klein-Nishina formula taking into account the energy and scattering angle correlation. The pair production cross sections are now calculated in the code from atomic number and midenergy of each group. To obtain angular flux distribution, the transport equation is solved in the same way as in case of neutron, using the direct integration method in a multigroup model. Both of an independent gamma ray source problem and a neutron-gamma source problem are possible to be solved. This report is written as a user's manual with a brief description of the calculational method. (author)

Improving Soil Moisture Estimation through the Joint Assimilation of SMOS and GRACE Satellite Observations

Science.gov (United States)

Girotto, Manuela

2018-01-01

Observations from recent soil moisture dedicated missions (e.g. SMOS or SMAP) have been used in innovative data assimilation studies to provide global high spatial (i.e., approximately10-40 km) and temporal resolution (i.e., daily) soil moisture profile estimates from microwave brightness temperature observations. These missions are only sensitive to near-surface soil moisture 0-5 cm). In contrast, the Gravity Recovery and Climate Experiment (GRACE) mission provides accurate measurements of the entire vertically integrated terrestrial water storage (TWS) column but, it is characterized by low spatial (i.e., 150,000 km2) and temporal (i.e., monthly) resolutions. Data assimilation studies have shown that GRACE-TWS primarily affects (in absolute terms) deeper moisture storages (i.e., groundwater). In this presentation I will review benefits and drawbacks associated to the assimilation of both types of observations. In particular, I will illustrate the benefits and drawbacks of their joint assimilation for the purpose of improving the entire profile of soil moisture (i.e., surface and deeper water storages).

Brightness Temperature and Soil Moisture Validation at Different Scales During the SMOS Validation Campaign in the Rur and Erft Catchments, Germany

DEFF Research Database (Denmark)

Montzka, Carsten; Bogena, Heye R.; Weihermüller, Lutz

2013-01-01

The European Space Agency's Soil Moisture and Ocean Salinity (SMOS) satellite was launched in November 2009 and delivers now brightness temperature and soil moisture products over terrestrial areas on a regular three-day basis. In 2010, several airborne campaigns were conducted to validate the SMOS......-band Microwave Emission of the Biosphere model. Measurements of the airborne L-band sensors EMIRAD and HUT-2D on-board a Skyvan aircraft as well as ground-based mobile measurements performed with the truck mounted JÜLBARA L-band radiometer were analyzed for calibration of the simulated brightness temperature...

A molecular evaluation of the Liagoraceae sensu lato (Nemaliales, Rhodophyta) in Bermuda including Liagora nesophila sp. nov. and Yamadaella grassyi sp. nov.

Science.gov (United States)

Popolizio, Thea R; Schneider, Craig W; Lane, Christopher E

2015-08-01

We have undertaken a comprehensive, molecular-assisted alpha-taxonomic examination of the rhodophyte family Liagoraceae sensu lato, a group that has not previously been targeted for molecular studies in the western Atlantic. Sequence data from three molecular markers indicate that in Bermuda alone there are 10 species in nine different genera. These include the addition of three genera to the flora - Hommersandiophycus, Trichogloeopsis, and Yamadaella. Liagora pectinata, a species with a type locality in Bermuda, is phylogenetically allied with Indo-Pacific species of Hommersandiophycus, and the species historically reported as L. ceranoides for the islands is morphologically and genetically distinct from that taxon, and is herein described as L. nesophila sp. nov. Molecular sequence data have also uncovered the Indo-Pacific L. mannarensis in Bermuda, a long-distance new western Atlantic record. DNA sequences of Trichogloeopsis pedicellata from the type locality (Bahamas) match with local specimens demonstrating its presence in Bermuda. We described Yamadaella grassyi sp. nov. from Bermuda, a species phylogenetically and morphologically distinct from the generitype, Y. caenomyce of the Indo-Pacific. Our data also indicated a single species each of Ganonema, Gloiocallis, Helminthocladia, Titanophycus, and Trichogloea in the flora. © 2015 Phycological Society of America.

Transfer factors of 226Ra, 210Pb and 210Po from NORM-contaminated oil field soil to some Atriplex species, Alfalfa and Bermuda grass

International Nuclear Information System (INIS)

Al-Masria, M.S.; Mukalallati, H.; Al-Hamwi, A.

2014-01-01

Transfer factors of 226 Ra, 210 Pb and 210 Po from soil contaminated with naturally occurring radioactive materials (NORM) in oil fields to some grazing plants were determined using pot experiments. Contaminated soil was collected from a dry surface evaporation pit from a Syrian oil field in the Der Ezzor area. Five types of plants (Atriplex halimus L., Atriplex canescens, Atriplex Leucoclada Bioss, Alfalfa and Bermuda grass) were grown and harvested three times over two years. The results show that the mean transfer factors of 226 Ra from the contaminated soil to the studied plant species were 1.6 x 10 -3 for Atriplex halimus L., 2.1 x 10 -3 for Atriplex canescens, 2.5 x 10 -3 for Atriplex Leucoclada Bioss, 8.2 x 10 -3 for Bermuda grass, and the highest value was 1.7 x 10 -2 for Alfalfa. Transfer factors of 210 Pb and 210 Po were higher than 226 Ra TFs by one order of magnitude and reached 7 x 10 -3 , 1.1 x 10 -2 , 1.2 x 10 -2 , 3.2 x 10 -2 and 2.5 x 10 -2 for Atriplex halimus, Atriplex canescens, Atriplex Leucoclada Bioss, Bermuda grass and Alfalfa, respectively. The results can be considered as base values for transfer factors of 226 Ra, 210 Pb and 210 Po in semiarid regions. (authors)

Indole-diterpenes and ergot alkaloids in Cynodon dactylon (Bermuda grass) infected with Claviceps cynodontis from an outbreak of tremors in cattle.

Science.gov (United States)

Uhlig, Silvio; Botha, Christo J; Vrålstad, Trude; Rolén, Elin; Miles, Christopher O

2009-12-09

Tremorgenic syndromes in mammals are commonly associated with indole-diterpenoid alkaloids of fungal origin. Cattle are sometimes affected by tremors (also called "staggers") when they graze on toxic grass pastures, and Bermuda grass ( Cynodon dactylon , kweek) has been known to be associated with tremors for several decades. This study reports the identification of paspalitrems and paspaline-like indole-diterpenes in the seedheads of Claviceps cynodontis -infected Bermuda grass collected from a pasture that had caused a staggers syndrome in cattle in South Africa and thereby links the condition to specific mycotoxins. The highest concentration (about 150 mg/kg) was found for paspalitrem B. Ergonovine and ergine (lysergic acid amide), together with their C-8 epimers, were found to co-occur with the indole-diterpenes at concentrations of about 10 microg/kg. The indole-diterpene profile of the extract from the ergotized Bermuda grass was similar to that of Claviceps paspali sclerotia. However, the C. paspali sclerotia contained in addition agroclavine and elymoclavine. This is the first study linking tremors associated with grazing of Bermuda grass to specific tremorgenic indole-diterpenoid mycotoxins.

Ergot fungus Claviceps cynodontis found on Bermuda grass (Cynodon dactylon) in the Americas

Czech Academy of Sciences Publication Activity Database

Pažoutová, Sylvie; Odvody, G.; Frederickson, D.E.

2005-01-01

Roč. 27, - (2005), s. 1-6 ISSN 0706-0661 Institutional research plan: CEZ:AV0Z5020903 Keywords : claviceps cynodon tis * ergot * bermuda grass Subject RIV: EE - Microbiology, Virology Impact factor: 1.066, year: 2005

The ESA SMOS Mission: Validation Activities at the Valencia Anchor Station

Energy Technology Data Exchange (ETDEWEB)

Lopez-Baeza, E.; Antolin, M. C.; Balling, J.; Belda, F.; Bouzinac, C.; Buil, A.; Cano, A.; Carbo, E.; Delwart, S.; Domenech, C.

2009-07-01

Since 2001, the Valencia Anchor Station (VAS) is being used for validation activities in the context of low spatial resolution Earth Observation Missions such as CERES (Clouds and the Earths Radiant Energy System), GERB (Geostationary Earth Radiation Budget), EPS (EUMET Polar System), and is also being prepared for SMOS (Soil Moisture and Ocean Salinity). These missions have in common the low spatial resolution of their respective footprints({approx}50x50 km{sup 2}) and the necessity of a well characterised and instrumented large scale area. (Author) 4 refs.

SMOS brightness data indicate ice thickness hence bedrock topography in east antarctica

DEFF Research Database (Denmark)

Skou, Niels; Kristensen, Steen Savstrup

2017-01-01

In order to evaluate a potential calibration target for spaceborne L-band radiometer systems, a 350 × 350 km area near the Concordia station on the East Antarctica plateau was mapped by an airborne L-band radiometer. Unexpectedly, the area showed significant brightness temperature spatial...... variations, well correlated with bedrock topography, hence ice thickness. Using SMOS data over a poorly known part of Antarctica, ice thickness in this area has been assessed, and an existing bedrock map has been improved....

Diagnostics of the SMOS radiometer antenna system at the DTU-ESA spherical near-field antenna test facility

DEFF Research Database (Denmark)

Cappellin, Cecilia; Frandsen, A.; Pivnenko, Sergey

2007-01-01

The recently developed Spherical Wave Expansion-to-Plane Wave Expansion (SWE-to-PWE) antenna diagnostics technique is employed in an investigation of the antenna system in the Microwave Imaging Radiometer using Aperture Synthesis (MIRAS) for ESA’s Soil Moisture and Ocean Salinity (SMOS) mission...

SMOS images restoration from L1A data: A sparsity-based variational approach

OpenAIRE

Preciozzi, J.; Musé, Pablo; Almansa, A.; Durand, Sylvain; Khazaal, Ali; Rougé, B.

2014-01-01

International audience; Data degradation by radio frequency interferences (RFI) is one of the major challenges that SMOS and other interferometers radiometers missions have to face. Although a great number of the illegal emitters were turned off since the mission was launched, not all of the sources were completely removed. Moreover, the data obtained previously is already corrupted by these RFI. Thus, the recovery of brightness temperature from corrupted data by image restoration techniques ...

ENZYMATIC HYDROLYSIS OF SWITCHGRASS AND COASTAL BERMUDA GRASS PRETREATED USING DIFFERENT CHEMICAL METHODS

Directory of Open Access Journals (Sweden)

Jiele Xu

2011-06-01

Full Text Available To investigate the effects of biomass feedstock and pretreatment method on the enzyme requirement during hydrolysis, swichgrass and coastal Bermuda grass pretreated using H2SO4, NaOH, and Ca(OH2 at the optimal conditions were subjected to enzymatic hydrolysis using two enzyme combinations: NS 50013 + NS 50010 and Cellic CTec + Cellic HTec. The enzyme loadings were optimized, and correlations between feedstock property, pretreatment strategy, and enzyme usage were evaluated. The results show that pretreatment methods resulting in greater lignin contents in the pretreated biomass were generally associated with higher enzyme requirements. More sugars could be recovered from alkaline-pretreated biomass during enzymatic hydrolysis due to the better carbohydrate preservation achieved at mild pretreatment temperatures. The cellulase enzyme, Cellic CTec, was more efficient in catalyzing the hydrolysis of coastal Bermuda grass, a feedstock more digestible than the pretreated swichgrass, following pretreatment with NaOH or Ca(OH2.

Integrative, Interdisciplinary Learning in Bermuda Through Video Projects

Science.gov (United States)

Fox, R. J.; Connaughton, M.

2017-12-01

Understanding an ecosystem and how humans impact it requires a multidisciplinary perspective and immersive, experiential learning is an exceptional way to achieve understanding. In summer 2017 we took 18 students to the Bermuda Institute of Ocean Sciences (BIOS) as part of a Washington College two-week, four-credit summer field course. We took a multi-disciplinary approach in choosing the curriculum. We focused on the ecology of the islands and surrounding coral reefs as well as the environmental impacts humans are having on the islands. Additionally, we included geology and both local and natural history. Our teaching was supplemented by the BIOS staff and local tour guides. The student learning was integrated and reinforced through student-led video projects. Groups of three students were tasked with creating a 5-7 minute video appropriate for a public audience. We selected video topics based upon locations we would visit in the first week and topics were randomly assigned. The project intention was for the students to critically analyze and evaluate an area of Bermuda that is a worthwhile tourist destination. Students presented why a tourist should visit a locale, the area's ecological distinctiveness and complexity, the impact humans are having, and ways tourists can foster stewardship of that locale. These projects required students to learn how to make and edit videos, collaborate with peers, communicate a narrative to the public, integrate multi-disciplinary topics for a clear, whole-system perspective, observe the environment from a critical viewpoint, and interview local experts. The students produced the videos within the two-week period, and we viewed the videos as a group on the last day. The students worked hard, were proud of their final products, and produced excellent videos. They enjoyed the process, which provided them opportunities to collaborate, show individual strengths, be creative, and work independently of the instructors.

Bermuda's balancing act: The economic dependence of cruise and air tourism on healthy coral reefs

NARCIS (Netherlands)

van Beukering, P.J.H.; Sarkis, S.; van der Putten, L.; Papyrakis, E.

2015-01-01

Although Bermuda has to date managed to achieve equilibrium between tourism and coral reef conservation, this delicate balance may be threatened by the growth and changing face of the tourism industry. This may result in negative impacts on the coral reefs and services provided by this valuable

Bermuda Triangle: a subsystem of the 168/E interfacing scheme used by Group B at SLAC

International Nuclear Information System (INIS)

Oxoby, G.J.; Levinson, L.J.; Trang, Q.H.

1979-12-01

The Bermuda Triangle system is a method of interfacing several 168/E microprocessors to a central system for control of the processors and overlaying their memories. The system is a three-way interface with I/O ports to a large buffer memory, a PDP11 Unibus and a bus to the 168/E processors. Data may be transferred bidirectionally between any two ports. Two Bermuda Triangles are used, one for the program memory and one for the data memory. The program buffer memory stores the overlay programs for the 168/E, and the data buffer memory, the incoming raw data, the data portion of the overlays, and the outgoing processed events. This buffering is necessary since the memories of 168/E microprocessors are small compared to the main program and the amount of data being processed. The link to the computer facility is via a Unibus to IBM channel interface. A PDP11/04 controls the data flow. 7 figures, 4 tables

Evaluation of a public health intervention to lower mercury exposure from fish consumption in Bermuda.

Directory of Open Access Journals (Sweden)

Eric Dewailly

Full Text Available OBJECTIVES: To assess the efficacy of a public health intervention to reduce blood mercury (Hg concentration levels in pregnant Bermudian women. METHODS: In 2003, we conducted a study entitled "Prenatal exposure of the Bermudian Population to Environmental Contaminants" which provided Bermuda's first baseline data on prenatal exposure to several environmental contaminants, including Hg. The mean Hg concentration from 42 healthy newborns measured in umbilical cord blood was 41.3 nmol/L, ranging from 5-160 nmol/L. This concentration was much higher than expected, being approximately 8 times the general levels found in Canada and the U.S. Furthermore, we estimated that 85% of total Hg measured was in the form of methylmercury (MeHg, indicating that seafood consumption was the primary source of Hg exposure during pregnancy in Bermuda. Locally sourced seafood was identified as the most significant possible contributory source of Hg exposure. In 2005 the authors began a complementary research programme to study the levels of Hg in local commercial fish species. Coming out of this research were specific local fish consumption guidelines issued by the Department of Health advising pregnant women to avoid those local fish species found to be high in Hg while still encouraging consumption of fish species having lower Hg levels. RESULTS: In 2010, under another research initiative, we returned to Bermuda to carry out another evaluation of Hg in human blood. Hg was measured in the blood of 49 pregnant women. The arithmetic mean Hg blood concentration was 6.6 nmol/L and the geometric mean 4.2 nmol/L. The maximum concentration found was 24 nmol/L. CONCLUSIONS: Hg exposure of Bermudian pregnant women has dropped significantly by a factor of around 5 since the foetal cord blood study in 2003.

Measuring surface salinity in the N. Atlantic subtropical gyre. The SPURS-MIDAS cruise, spring 2013

Science.gov (United States)

Font, Jordi; Ward, Brian; Emelianov, Mikhail; Morisset, Simon; Salvador, Joaquin; Busecke, Julius

2014-05-01

SPURS-MIDAS (March-April 2013) on board the Spanish R/V Sarmiento de Gamboa was a contribution to SPURS (Salinity Processes in the Upper ocean Regional Study) focused on the processes responsible for the formation and maintenance of the salinity maximum associated to the North Atlantic subtropical gyre. Scientists from Spain, Ireland, France and US sampled the mesoscale and submesoscale structures in the surface layer (fixed points and towed undulating CTD, underway near surface TSG) and deployed operational and experimental drifters and vertical profilers, plus additional ocean and atmospheric data collection. Validation of salinity maps obtained from the SMOS satellite was one of the objectives of the cruise. The cruise included a joint workplan and coordinated sampling with the US R/V Endeavor, with contribution from SPURS teams on land in real time data and analysis exchange. We present here an overview of the different kinds of measurements made during the cruise, as well as a first comparison between SMOS-derived sea surface salinity products and salinity maps obtained from near-surface sampling in the SPURS-MIDAS area and from surface drifters released during the cruise.

Investigating Bermuda's pollution history through stable isotope analyses of modern and museum-held gorgonian corals

International Nuclear Information System (INIS)

Baker, David M.; Murdoch, Thaddeus J.T.; Conti-Jerpe, Inga; Fogel, Marilyn

2017-01-01

For centuries, Bermuda has been challenged with wastewater management for the protection of human and environmental health. By quantifying the δ 15 N of the common sea fan Gorgonia ventalina sampled from 30 sites throughout Bermuda we show that sewage-derived nitrogen is detectable on nearshore coral reefs and declines across the lagoon to the outer rim. We also sampled gorgonians from two museum collections representing a 50y time-series (1958–2008). These samples revealed an increase in δ 15 N of > 4.0‰ until the mid-1970s, after which δ 15 N values slowly declined by ~ 2.0‰. A δ 15 N chronology from a gorgonian skeleton exhibited a similar decline over the last 30–40 years of approximately 0.6‰. We conclude that policies have been effective in reducing sewage impacts to Bermudian reefs. However, significant sources of sewage pollution persist and are likely have a strong impact on harbor and nearshore coral communities and human health.

Rainfall Imprint on Sea Surface Salinity in the ITCZ: new satellite perspectives

Science.gov (United States)

Boutin, J.; Viltard, N.; Supply, A.; Martin, N.; Vergely, J. L.; Hénocq, C.; Reverdin, G. P.

2016-02-01

The European Soil Moisture and Ocean Salinity (SMOS) satellite mission monitors sea surface salinity (SSS) over the global ocean for more than 5 years since 2010. The MADRAS microwave radiometer carried by the French (CNES) Indian (ISRO) satellite mission Megha-Tropiques sampled the 30° N-30° S region end of 2011 and in 2012, very complementary to other Global Precipitation Measurement(GPM) missions. In tropical regions, SMOS SSS contains a large imprint of atmospheric rainfall, but is also likely affected by oceanographic processes (advection and diffusion). At local and short time scales, Boutin et al. (2013, 2014) have shown that the spatio-temporal variability of SSS is dominated by rainfall as detected by satellite microwave radiometers and have demonstrated a close to linear relationship between SMOS SSS freshening under rain cells and satellite rain rate. The order of magnitude is in remarkable agreement with the theoretical renewal model of Schlussel et al. (1997) and compatible with AQUARIUS SSS observations, as well as with in situ drifters observations although the latter are local and taken at 45cm depth while satellite L-band SSS roughly correspond to the top 1cm depth and are spatially integrated over 43-150km. It is thus expected that the combined information of satellite rain rates and satellite SSS brings new constraints on the precipitation budget. We first look at the consistency between the spatial structures of SMOS SSS decrease and of rain rates derived either from the MADRAS microwave radiometer or from the CMORPH combined products that do not use MADRAS rain rates. This provides an indirect validation of the rain rates estimates. We then investigate the impact of rain history and of wind speed on the observed SMOS freshening. Based on these results, we discuss the precision on various precipitation estimates over 2012 in the ITCZ region and the major sources of uncertainties that the SPURS2 campaign could help to resolve.

Analysis of L-band radiometric data over the Mediterranean Sea from the SMOS Validation Rehearsal campaign

Science.gov (United States)

Gabarro, C.; Talone, M.; Font, J.

2009-04-01

L-band radiometric data obtained with a real aperture airborne radiometer during SMOS validation Rehearsal campaign (April-May 2008) over the NW Mediterranean Sea have been analysed. EMIRAD, a fully polarimetric radiometer developed by the Technical University of Denmark operating in the 1400 - 1427 MHz band, was mounted on board a Skyvan aircraft from the Helsinki University of Technology. Two antennas were used: one facing nadir with 37.6° full aperture at half-power; and one placed towards the rear of the aircraft at 40° zenith angle with 30.6° full aperture at half-power. Two transit flights over the sea from Marseille to Valencia (19 April 2008) and from Valencia to Marseille (3 May 2008) have been studied. Two meteorological and oceanographic buoys were moored 40 Km offshore in front of Tarragona and were overflown during these transits. Additionally, information on sea surface temperature (SST) and sea surface salinity (SSS) was obtained from operational model outputs (Mediterranean Forecasting System - Mediterranean Operational Oceanography Network) and wind speed from QuikSCAT. Measured brightness temperatures (Tb) have been compared with modelled Tb, using a semi-empirical emissivity model: Klein and Swift model is used to define the dielectric constant and Hollinger model for the rough sea emissivity contribution. Comparisons show that in general measured Tb variability fits with modelled variability, although a bias is observed in the aft V channel.

Inferring Land Surface Model Parameters for the Assimilation of Satellite-Based L-Band Brightness Temperature Observations into a Soil Moisture Analysis System

Science.gov (United States)

Reichle, Rolf H.; De Lannoy, Gabrielle J. M.

2012-01-01

The Soil Moisture and Ocean Salinity (SMOS) satellite mission provides global measurements of L-band brightness temperatures at horizontal and vertical polarization and a variety of incidence angles that are sensitive to moisture and temperature conditions in the top few centimeters of the soil. These L-band observations can therefore be assimilated into a land surface model to obtain surface and root zone soil moisture estimates. As part of the observation operator, such an assimilation system requires a radiative transfer model (RTM) that converts geophysical fields (including soil moisture and soil temperature) into modeled L-band brightness temperatures. At the global scale, the RTM parameters and the climatological soil moisture conditions are still poorly known. Using look-up tables from the literature to estimate the RTM parameters usually results in modeled L-band brightness temperatures that are strongly biased against the SMOS observations, with biases varying regionally and seasonally. Such biases must be addressed within the land data assimilation system. In this presentation, the estimation of the RTM parameters is discussed for the NASA GEOS-5 land data assimilation system, which is based on the ensemble Kalman filter (EnKF) and the Catchment land surface model. In the GEOS-5 land data assimilation system, soil moisture and brightness temperature biases are addressed in three stages. First, the global soil properties and soil hydraulic parameters that are used in the Catchment model were revised to minimize the bias in the modeled soil moisture, as verified against available in situ soil moisture measurements. Second, key parameters of the "tau-omega" RTM were calibrated prior to data assimilation using an objective function that minimizes the climatological differences between the modeled L-band brightness temperatures and the corresponding SMOS observations. Calibrated parameters include soil roughness parameters, vegetation structure parameters

Snow depth retrieval from L-band satellite measurements on Arctic and Antarctic sea ice

Science.gov (United States)

Maaß, N.; Kaleschke, L.; Wever, N.; Lehning, M.; Nicolaus, M.; Rossmann, H. L.

2017-12-01

The passive microwave mission SMOS provides daily coverage of the polar regions and measures at a low frequency of 1.4 GHz (L-band). SMOS observations have been used to operationally retrieve sea ice thickness up to 1 m and to estimate snow depth in the Arctic for thicker ice. Here, we present how SMOS-retrieved snow depths compare with airborne measurements from NASA's Operation IceBridge mission (OIB) and with AMSR-2 satellite retrievals at higher frequencies, and we show first applications to Antarctic sea ice. In previous studies, SMOS and OIB snow depths showed good agreement on spatial scales from 50 to 1000 km for some days and disagreement for other days. Here, we present a more comprehensive comparison of OIB and SMOS snow depths in the Arctic for 2011 to 2015. We find that the SMOS retrieval works best for cold conditions and depends on auxiliary information on ice surface temperature, here provided by MODIS thermal imagery satellite data. However, comparing SMOS and OIB snow depths is difficult because of the different spatial resolutions (SMOS: 40 km, OIB: 40 m). Spatial variability within the SMOS footprint can lead to different snow conditions as seen from SMOS and OIB. Ideally the comparison is made for uniform conditions: Low lead and open water fraction, low spatial and temporal variability of ice surface temperature, no mixture of multi- and first-year ice. Under these conditions and cold temperatures (surface temperatures below -25°C), correlation coefficients between SMOS and OIB snow depths increase from 0.3 to 0.6. A finding from the comparison with AMSR-2 snow depths is that the SMOS-based maps depend less on the age of the sea ice than the maps derived from higher frequencies. Additionally, we show first results of SMOS snow depths for Antarctic sea ice. SMOS observations are compared to measurements of autonomous snow buoys drifting in the Weddell Sea since 2014. For a better comparability of these point measurements with SMOS data, we use

Geotechnical properties of sediments from North Pacific and Northern Bermuda Rise

International Nuclear Information System (INIS)

Silva, A.J.; Laine, E.P.; Lipkin, J.; Heath, G.R.; Akers, S.A.

1980-01-01

Studies of geotechnical properties for the Sub-seabed Disposal Program have been oriented toward sediment characterization related to effectiveness as a containment media and determination of detailed engineering behavior. Consolidation tests of the deeper samples in the North Pacific clays indicate that the sediment column is normally consolidated. The in-situ coefficient of permeability (k) within the cored depth of 25 meters is relatively constant at 10 -7 cm/sec. Consolidated undrained (CIU) triaxial tests indicate stress-strain properties characteristic of saturated clays with effective angles of friction of 35 0 for smectite and 31 0 for illite. These results are being used in computer modeling efforts. Some general geotechnical property data from the Bermuda Rise are also discussed

MIRAS characterization and monitoring during the SMOS In-Orbit Commissioning Phase

Science.gov (United States)

Corbella, I.; Torres, F.; Martin-Neira, M.; Duffo, N.; González-Gambau, V.; Camps, A.; Vall-Llossera, M.

2009-04-01

1 Introduction The Microwave Imaging Radiometer with Aperture Synthesis (MIRAS) is the single payload of the Soil Moisture and Ocean Salinity (SMOS) mission. The instrument was completed in early 2007 and thoroughly tested both in anechoic chamber and vacuum thermal chamber during 2007. It was integrated to the platform in early 2008 and re-tested, including compatibility, during 2008. At present, the whole satellite is stowed and waiting to be launched during 2009. In two weeks after launch, the satellite will be in the final orbit with all deployments completed. Then the In-Orbit Commissioning Phase will start, having an estimated duration of 5.5 months. During this phase, the instrument modes of operation will be systematically checked and the calibration parameters will be fully characterized in real conditions. Also, the first brightness temperature images will be obtained in order to assess the overall retrieval procedures including inversion. In the end, the objective of the In-Orbit Commissioning Phase is to provide verification that the payload meets the scientific requirements of the mission. The general design and planning of the In-Orbit Commissioning Phase is given in [1]. This abstract presents the foreseen activities to be performed during this phase by the UPC team. Just after the start of the In-Orbit Commissioning Phase, the instrument will be commanded to perform a sequence of operations oriented at providing a full characterization in terms of calibration parameters. The idea is to reproduce the results obtained during the tests carried out on ground [2]. In particular, the following issues will be covered: Thermal Stability: To provide understanding of both the intra-orbit and inter-orbit temperature variations. The instrument will be continuously operating during a number of orbits while all temperature sensors being monitored. Electrical Stability: To re-compute all internal calibration parameters (gains, offsets, receiver noise temperatures

Soil moisture extremes drive tree canopy death in 2011 Texas drought: multispectral (Landsat, NAIP) and L-band passive microwave remote sensing (SMOS-IC)

Science.gov (United States)

Swenson, J. J.; Schwantes, A. M.; Johnson, D. M.; Domec, J. C.; Wigneron, J. P.

2017-12-01

Climate change is bringing more frequent and intense droughts that are causing broad scale tree mortality events. Detecting regional drought stress is now more frequently monitored with passive microwave satellite sensing of soil moisture (SM) and vegetation water status (through the vegetation optical depth (VOD) index), that can be validated with in-situ measurements of soil moisture or corroborated with satellite multispectral indices of greenness. The detection of canopy death however marks the passing of a definitive physiological threshold. We compare soil moisture from the L-band SMOS-IC passive microwave product (2010-20176) to an accurate and detailed (30-m spatial resolution) map of canopy loss across the US state of Texas during the record breaking 2011 drought. The SMOS-IC product (25 km) is a new and simpler product of soil moisture and VOD that has been shown to be more accurate than past SMOS products and it is independent of ancillary data. Canopy loss was mapped from Landsat imagery trained with 186, 41 km2 subplots of classified National Agriculture Inventory Program color infrared aerial imagery recorded before and after the drought. Bringing these two datasets of disparate spatial resolution together and averaging them across the state, we find that areas with at least 25% tree cover that experienced the most canopy loss (highest quartile) had lower soil moisture compared to areas with less canopy loss in 2011. These areas with the most loss, experienced up to 9 weeks of the growing season at stress as well as the effects of topography, soil, and climate. Having more information on plant hydraulic limits would lend itself to modeling and prediction of die offs based on satellite tracked SM.

Global Soil Moisture Estimation from L-Band Satellite Data: The Impact of Radiative Transfer Modeling in Assimilation and Retrieval Systems

Science.gov (United States)

De Lannoy, Gabrielle; Reichle, Rolf; Gruber, Alexander; Bechtold, Michel; Quets, Jan; Vrugt, Jasper; Wigneron, Jean-Pierre

2018-01-01

The SMOS and SMAP missions have collected a wealth of global L-band Brightness temperature (Tb) observations. The retrieval of surface Soil moisture estimates, and the estimation of other geophysical Variables, such as root-zone soil moisture and temperature, via data Assimilation into land surface models largely depends on accurate Radiative transfer modeling (RTM). This presentation will focus on various configuration aspects of the RTM (i) for the inversion of SMOS Tb to surface soil moisture, and (ii) for the forward modeling as part of a SMOS Tb data assimilation System to estimate a consistent set of geophysical land surface Variables, using the GEOS-5 Catchment Land Surface Model.

Transfer factor of Radium -226, lead-210 and Polonium-210 from Norm contaminated soil to Atriplex, Afelfa and Bermuda grasses

International Nuclear Information System (INIS)

Al-Masri, M.S.; Mukhallati, H.; Al-Hamwi, A.

2011-10-01

transfer factors of Radium -226, lead-210 and Polonium-210 from contaminated soil with oil coproduced water to grazing plants in the north eastern region of Syria have been determined. contaminated soil was collected from one of the AL-Furat Petroleum Oil company oil fields;soil was distributed into several pots where the studied plants were planted in order to study the transfer factors of radioisotopes to them. Results have shown that the mean transfer factors of radium to green parts have reached has reached 0.0016 in Atriplex halimus L.,0.0021 in Atriplex canescens Nutt, 0.0025 in Atriplex Leucoclada Bioss,0.0082 in Bermuda grass and 0.0167 in Medicago Sativ L,which was the highest,while the transfer factors of polonium and lead were ten times higher than those for radium and reacted 0.012 in Atriplex Leucoclada Bioss, 0.011 in Atriplex canescens Nutt, 0.007 in Atriplex halimus L.0.32 in bermuda grass and 0.025 in Afelfa.(author)

A Proposed Extension to the Soil Moisture and Ocean Salinity Level 2 Algorithm for Mixed Forest and Moderate Vegetation Pixels

Science.gov (United States)

Panciera, Rocco; Walker, Jeffrey P.; Kalma, Jetse; Kim, Edward

2011-01-01

The Soil Moisture and Ocean Salinity (SMOS)mission, launched in November 2009, provides global maps of soil moisture and ocean salinity by measuring the L-band (1.4 GHz) emission of the Earth's surface with a spatial resolution of 40-50 km.Uncertainty in the retrieval of soilmoisture over large heterogeneous areas such as SMOS pixels is expected, due to the non-linearity of the relationship between soil moisture and the microwave emission. The current baseline soilmoisture retrieval algorithm adopted by SMOS and implemented in the SMOS Level 2 (SMOS L2) processor partially accounts for the sub-pixel heterogeneity of the land surface, by modelling the individual contributions of different pixel fractions to the overall pixel emission. This retrieval approach is tested in this study using airborne L-band data over an area the size of a SMOS pixel characterised by a mix Eucalypt forest and moderate vegetation types (grassland and crops),with the objective of assessing its ability to correct for the soil moisture retrieval error induced by the land surface heterogeneity. A preliminary analysis using a traditional uniform pixel retrieval approach shows that the sub-pixel heterogeneity of land cover type causes significant errors in soil moisture retrieval (7.7%v/v RMSE, 2%v/v bias) in pixels characterised by a significant amount of forest (40-60%). Although the retrieval approach adopted by SMOS partially reduces this error, it is affected by errors beyond the SMOS target accuracy, presenting in particular a strong dry bias when a fraction of the pixel is occupied by forest (4.1%v/v RMSE,-3.1%v/v bias). An extension to the SMOS approach is proposed that accounts for the heterogeneity of vegetation optical depth within the SMOS pixel. The proposed approach is shown to significantly reduce the error in retrieved soil moisture (2.8%v/v RMSE, -0.3%v/v bias) in pixels characterised by a critical amount of forest (40-60%), at the limited cost of only a crude estimate of the

Predation as the primary selective force in recurrent evolution of gigantism in Poecilozonites land snails in Quaternary Bermuda

Science.gov (United States)

Olson, Storrs L.; Hearty, Paul J.

2010-01-01

During the last half million years, pulses of gigantism in the anagenetic lineage of land snails of the subgenus Poecilozonites on Bermuda were correlated with glacial periods when lower sea level resulted in an island nearly an order of magnitude larger than at present. During those periods, the island was colonized by large vertebrate predators that created selection pressure for large size and rapid growth in the snails. Extreme reduction in land area from rising seas, along with changes in ecological conditions at the onset of interglacial episodes, marked extinction events for large predators, after which snails reverted to much smaller size. The giant snails were identical in morphology during the last two glacials when the predators included a large flightless rail Rallus recessus (marine isotope stages (MIS) 4-2) and a crane Grus latipes and a duck Anas pachysceles (MIS 6). In a preceding glacial period (MIS 10), when the fauna also included the tortoise Hesperotestudo bermudae, the snails were not only large, but the shells were much thicker, presumably to prevent crushing by tortoises. Evolution of Poecilozonites provides an outstanding example of dramatic morphological change in response to environmental pressures in the absence of cladogenesis. PMID:20554560

Effect of two phyto hormone producer rhizobacteria on the bermuda grass growth response and tolerance to phenanthrene

International Nuclear Information System (INIS)

Guerrero-Zuniga, A.; Rojas-Contreras, A.; Rodriguez-Dorantes, A.; Montes-Villafan, S.

2009-01-01

Plant growth-promoting rhizobacteria (PGPR) are free-living bacteria that have the ability to relieve environmental stress in plants, increasing the plant growth potential. Of importance to phytoremediation, PGPR stimulate plant root development and enhance root growth.This study evaluated the growth response and the tolerance to phenanthrene of Bermuda grass: Cynodon dactylon inoculated with two phytohormone producer rhizobacteria: strains II and III, isolated from a contaminated soil with petroleum hydrocarbons. (Author)

Effect of two phyto hormone producer rhizobacteria on the bermuda grass growth response and tolerance to phenanthrene

Energy Technology Data Exchange (ETDEWEB)

Guerrero-Zuniga, A.; Rojas-Contreras, A.; Rodriguez-Dorantes, A.; Montes-Villafan, S.

2009-07-01

Plant growth-promoting rhizobacteria (PGPR) are free-living bacteria that have the ability to relieve environmental stress in plants, increasing the plant growth potential. Of importance to phytoremediation, PGPR stimulate plant root development and enhance root growth.This study evaluated the growth response and the tolerance to phenanthrene of Bermuda grass: Cynodon dactylon inoculated with two phytohormone producer rhizobacteria: strains II and III, isolated from a contaminated soil with petroleum hydrocarbons. (Author)

Depth, temperature, oxygen and salinity profile data from repetitive occupation of a hydrographic station off St. George's, Bermuda from 1954 through 1984 (NODC Accession 0000650)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — CTD, bottle, and other data were collected from the PANULIRUS and other platforms from repetitive occupations of a hydrographic station off St. George's, Bermuda....

Examining the Impact of a Public Health Message on Fish Consumption in Bermuda.

Directory of Open Access Journals (Sweden)

Catherine McLean Pirkle

Full Text Available In 2003 mean cord blood mercury concentrations in pregnant Bermudian women exceeded levels associated with adverse health outcomes in children. The principal mercury source was local fish species. Public health messages were developed suggesting pregnant women reduce consumption of fish species with higher mercury concentrations (e.g. swordfish, substituting species containing lower mercury concentrations, and elevated omega-3 fatty acids (e.g. anchovies. Recent evidence indicates mercury concentrations in Bermuda's pregnant women have fallen five- fold.Assess whether changes in women's fish eating patterns during pregnancy are consistent with the public health messaging. Determine who is making changes to their diet during pregnancy and why.Mixed methods study with a cross-sectional survey of 121 pregnant women, including 13 opened-ended interviews. Health system, social vulnerability, public health messaging, and socio-demographic variables were characterized and related to changes in fish consumption during pregnancy. Qualitative data were coded according to nutritional advice messages, comprehension of communication strategies, and sources of information.95% of women surveyed encountered recommendations about fish consumption during pregnancy. 75% reported modifying fish eating behaviors because of recommendations. Principal sources of information about fish consumption in pregnancy were health care providers and the Internet. 71% of women reported reducing consumption of large fish species with greater mercury levels, but 60% reported reduced consumption of smaller, low mercury fish. No participant mentioned hearing about the benefits of fish consumption. More frequent exposure to public health messages during pregnancy was associated with lower reported consumption. Bermudian born women were less likely to reduce consumption of large fish species during pregnancy.In Bermuda, public health messages advocating reduced consumption of larger

The Multilateral Disarmament Process. Conference on the United Nations of the Next Decade (16th, Warwick, Bermuda, June 21-26, 1981).

Science.gov (United States)

Stanley Foundation, Muscatine, IA.

This is a report of a conference held in Bermuda in 1981 to discuss a multilateral approach to disarmament. The conference was an informal, off-the-record exchange of ideas and opinions among 24 diplomats and scholars from 18 countries and two international agencies. Participants considered current disarmament concepts, assessed UN disarmament…

METHODS OF TAXATION IN THE TAX HAVENS. EXAMPLES OF TAXATION IN THE BAHAMAS, BERMUDA AND THE CAYMAN ISLANDS

Directory of Open Access Journals (Sweden)

ENEA CONSTANTIN

2015-12-01

Full Text Available We should never trust appearances: "the drum, with all the noise it makes is not only filled with wind"[1]. This old oriental proverb perfectly illustrates our proposal regarding the "true false" tax havens. Only at the beginning of this century, learned before firms to exercise their activity in the national territory, returned to international trade. The continuous search for new outlets to escape the growing production, export them first and then they were implanted overseas sales platforms and then installing production. Zero Haven sites or havens with zero tax consisting essentially of small economies, the British colonies (Cayman Islands, British Virgin Islands, dependent territories of the Commonwealth (Bermuda or territories became independent (Antigua, Bahamas 1963 or Vanuatu 1980. Our study will analyze tax havens most common: Bahamas, Bermuda or the Cayman Islands, where we find all models of reception that can be viewed in other areas zero-haven: International Business Companies (Antigua, the Virgin Islands, Nevis exemption schemes to insurance companies or banks (Barbados, Vanuatu. The subject of tax evasion subject of much debate, targeting both the domestic economic space and the world. Unlike their concerns globally, domestic concerns to reduce tax evasion resumes, especially on taxation of small businesses, avoiding knowingly scope of tax havens.

Summary of Meteorological Observations, Surface (SMOS), El Toro, California

Science.gov (United States)

1983-10-01

SURFACE WINDS DETACHMENT ASHEVILLE. NC PERCENTAGE FREQUENCY OF WIND DIRECTION AND SPEED (FROM HOURLY OBSERVATIONS) EL TIPO , CALIrQO𔃾IA 73-’.? A ir, U~~tiAL...OF WiND DIRECTION AND SPEED (FROM HOURLY OBSERVATIONS) ... 112L. E L TIPO , ALIODkI1A 71-q2 r ALL wEANCP _______ MEAN 11-11 6.S 7.A 1.U 11.W6 17.21 n...nTa IO STyVIO. *..M YUOnb0U T-mp. WIT BULl TEMPERATUIE DEPRESSION fF) TOTAL TOTAL 0 1- 2 3 -4 - j 8 9 10 11-12113 14,11516117. 18119 270:i21 . 2 23

N-parameter retrievals from L-band microwave observations acquired over a variety of crop fields

DEFF Research Database (Denmark)

Pardé, M.; Wigneron, J-P.; Waldteufel, P.

2004-01-01

A number of studies have shown the feasibility of estimating surface soil moisture from L-band passive microwave measurements. Such measurements should be acquired in the near future by the Soil Moisture and Ocean Salinity (SMOS) mission. The SMOS measurements will be done at many incidence angles...

Modeling Biogeochemical-Physical Interactions and Carbon Flux in the Sargasso Sea (Bermuda Atlantic Time-series Study site)

Science.gov (United States)

Signorini, Sergio R.; McClain, Charles R.; Christian, James R.

2001-01-01

An ecosystem-carbon cycle model is used to analyze the biogeochemical-physical interactions and carbon fluxes in the Bermuda Atlantic Time-series Study (BATS) site for the period of 1992-1998. The model results compare well with observations (most variables are within 8% of observed values). The sea-air flux ranges from -0.32 to -0.50 mol C/sq m/yr, depending upon the gas transfer algorithm used. This estimate is within the range (-0.22 to -0.83 mol C/sq m/yr) of previously reported values which indicates that the BATS region is a weak sink of atmospheric CO2. The overall carbon balance consists of atmospheric CO2 uptake of 0.3 Mol C/sq m/yr, upward dissolved inorganic carbon (DIC) bottom flux of 1.1 Mol C/sq m/yr, and carbon export of 1.4 mol C/sq m/yr via sedimentation. Upper ocean DIC levels increased between 1992 and 1996 at a rate of approximately 1.2 (micro)mol/kg/yr, consistent with observations. However, this trend was reversed during 1997-1998 to -2.7 (micro)mol/kg/yr in response to hydrographic changes imposed by the El Nino-La Nina transition, which were manifested in the Sargasso Sea by the warmest SST and lowest surface salinity of the period (1992-1998).

Sharing Data to Build a Medical Information Commons: From Bermuda to the Global Alliance.

Science.gov (United States)

Cook-Deegan, Robert; Ankeny, Rachel A; Maxson Jones, Kathryn

2017-08-31

The Human Genome Project modeled its open science ethos on nematode biology, most famously through daily release of DNA sequence data based on the 1996 Bermuda Principles. That open science philosophy persists, but daily, unfettered release of data has had to adapt to constraints occasioned by the use of data from individual people, broader use of data not only by scientists but also by clinicians and individuals, the global reach of genomic applications and diverse national privacy and research ethics laws, and the rising prominence of a diverse commercial genomics sector. The Global Alliance for Genomics and Health was established to enable the data sharing that is essential for making meaning of genomic variation. Data-sharing policies and practices will continue to evolve as researchers, health professionals, and individuals strive to construct a global medical and scientific information commons.

Comparative physiological and proteomic analyses reveal the actions of melatonin in the reduction of oxidative stress in Bermuda grass (Cynodon dactylon (L). Pers.).

Science.gov (United States)

Shi, Haitao; Wang, Xin; Tan, Dun-Xian; Reiter, Russel J; Chan, Zhulong

2015-08-01

The fact of melatonin as an important antioxidant in animals led plant researchers to speculate that melatonin also acts in the similar manner in plants. Although melatonin has significant effects on alleviating stress-triggered reactive oxygen species (ROS), the involvement of melatonin in direct oxidative stress and the underlying physiological and molecular mechanisms remain unclear in plants. In this study, we found that exogenous melatonin significantly alleviated hydrogen peroxide (H2O2)-modulated plant growth, cell damage, and ROS accumulation in Bermuda grass. Additionally, 76 proteins significantly influenced by melatonin during mock or H2O2 treatment were identified by gel-free proteomics using iTRAQ (isobaric tags for relative and absolute quantitation). Metabolic pathway analysis showed that several pathways were markedly enhanced by melatonin and H2O2 treatments, including polyamine metabolism, ribosome pathway, major carbohydrate metabolism, photosynthesis, redox, and amino acid metabolism. Taken together, this study provides more comprehensive insights into the physiological and molecular mechanisms of melatonin in Bermuda grass responses to direct oxidative stress. This may relate to the activation of antioxidants, modulation of metabolic pathways, and extensive proteome reprograming. © 2015 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Comparative study of the growth and carbon sequestration potential of Bermuda grass in industrial and urban areas

Directory of Open Access Journals (Sweden)

Usman Ali

2018-06-01

Full Text Available Climate change is a global phenomenon occurring throughout the world. Greenhouse gases (GHGs especially carbon dioxide (CO2 considered to be the major culprit to bring these changes. So, carbon (C sequestration by any mean could be useful to reduce the CO2 level in atmosphere. Turf grasses have the ability to sequester C and minimize the effects of GHGs on the environment. In order to study that how turf grasses can help in C sequestration, Bermuda grass (Cynodon dactylon was grown both at industrial and urban location and its effect on C storage were assessed by soil and plant analysis. Dry deposition of ammonium and nitrate was maximum at both locations through the year. However wet deposition was highest during the months of high rainfall. It was examined through soil analysis that soil organic matter, soil C and nitrogen in both locations increased after second mowing of grass. However, soil pH 6.68 in urban and 7.00 in industrial area and EC 1.86 dS/m in urban and 1.90 dS/m in industrial area decreased as the grass growth continue. Soil fresh weight (27.6 g in urban and (27.28 g industrial area also decreased after first and second mowing of grass. The C levels in plant dry biomass also increased which showed improved ability of plant to uptake C from the soil and store it. Similarly, chlorophyll contents were more in industrial area compared to urban area indicates the positive impact of high C concentration. Whereas stomatal conductance was reduced in high C environment to slow down respiration process. Hence, from present study it can be concluded that the Bermuda grass could be grown in areas with high C concentration in atmosphere for sequestrating C in soil.

Effects of ethylene on photosystem II and antioxidant enzyme activity in Bermuda grass under low temperature.

Science.gov (United States)

Hu, Zhengrong; Fan, Jibiao; Chen, Ke; Amombo, Erick; Chen, Liang; Fu, Jinmin

2016-04-01

The phytohormone ethylene has been reported to mediate plant response to cold stress. However, it is still debated whether the effect of ethylene on plant response to cold stress is negative or positive. The objective of the present study was to explore the role of ethylene in the cold resistance of Bermuda grass (Cynodon dactylon (L).Pers.). Under control (warm) condition, there was no obvious effect of the ethylene precursor 1-aminocyclopropane-1-carboxylic acid (ACC) or the antagonist Ag(+) of ethylene signaling on electrolyte leakage (EL) and malondialdehyde (MDA) content. Under cold stress conditions, ACC-treated plant leaves had a greater level of EL and MDA than the untreated leaves. However, the EL and MDA values were lower in the Ag(+) regime versus the untreated. In addition, after 3 days of cold treatment, ACC remarkably reduced the content of soluble protein and also altered antioxidant enzyme activity. Under control (warm) condition, there was no significant effect of ACC on the performance of photosystem II (PS II) as monitored by chlorophyll α fluorescence transients. However, under cold stress, ACC inhibited the performance of PS II. Under cold condition, ACC remarkably reduced the performance index for energy conservation from excitation to the reduction of intersystem electron acceptors (PI(ABS)), the maximum quantum yield of primary photochemistry (φP0), the quantum yield of electron transport flux from Q(A) to Q(B) (φE0), and the efficiency/probability of electron transport (ΨE0). Simultaneously, ACC increased the values of specific energy fluxes for absorption (ABS/RC) and dissipation (DI0/RC) after 3 days of cold treatment. Additionally, under cold condition, exogenous ACC altered the expressions of several related genes implicated in the induction of cold tolerance (LEA, SOD, POD-1 and CBF1, EIN3-1, and EIN3-2). The present study thus suggests that ethylene affects the cold tolerance of Bermuda grass by impacting the antioxidant system

Mutation breeding of vegetatively propagated turf and forage Bermuda grass

International Nuclear Information System (INIS)

Burton, G.W.; Hanna, W.W.

1982-01-01

Tifgreen, Tifway and Tifdwarf, sterile triploid (2n = 27)F 1 hybrids between Cynodon dactylon and C. transvaalensis, are widely used turf grasses bred at Tifton, Georgia. They cannot be improved by conventional breeding methods. Attempts to improve them by treating short dormant rhizome sections with EMS failed but exposing them to 7-9 kR of gamma radiation produced 158 mutants. These have been evaluated at Tifton, and Beltsville, Maryland, and nine that appear to be better than the parents in one or more characteristics were planted in 8 x 10 m plots in triplicate in 1977. Test results to date suggest that one or more of these will be good enough to warrant a name and release to the public. Coastcross-1 is an outstanding sterile F 1 hybrid Bermuda grass that gives 35% more beef per acre but lacks winter hardiness. Since 1971, several million sprigs of Coastcross-1 have been exposed to 7 kR and have been planted and screened for winter survival at the Georgia Mountain Experiment Station. Chlorophyll-deficient mutants have appeared and one mutant slightly, but significantly, more winter hardy than Coastcross-1 has been obtained. Sprigs of this mutant named Coastcross 1-M3 are being irradiated and screened in an attempt to increase its winter hardiness. (author)

Global retrieval of soil moisture and vegetation properties using data-driven methods

Science.gov (United States)

Rodriguez-Fernandez, Nemesio; Richaume, Philippe; Kerr, Yann

2017-04-01

Data-driven methods such as neural networks (NNs) are a powerful tool to retrieve soil moisture from multi-wavelength remote sensing observations at global scale. In this presentation we will review a number of recent results regarding the retrieval of soil moisture with the Soil Moisture and Ocean Salinity (SMOS) satellite, either using SMOS brightness temperatures as input data for the retrieval or using SMOS soil moisture retrievals as reference dataset for the training. The presentation will discuss several possibilities for both the input datasets and the datasets to be used as reference for the supervised learning phase. Regarding the input datasets, it will be shown that NNs take advantage of the synergy of SMOS data and data from other sensors such as the Advanced Scatterometer (ASCAT, active microwaves) and MODIS (visible and infra red). NNs have also been successfully used to construct long time series of soil moisture from the Advanced Microwave Scanning Radiometer - Earth Observing System (AMSR-E) and SMOS. A NN with input data from ASMR-E observations and SMOS soil moisture as reference for the training was used to construct a dataset sharing a similar climatology and without a significant bias with respect to SMOS soil moisture. Regarding the reference data to train the data-driven retrievals, we will show different possibilities depending on the application. Using actual in situ measurements is challenging at global scale due to the scarce distribution of sensors. In contrast, in situ measurements have been successfully used to retrieve SM at continental scale in North America, where the density of in situ measurement stations is high. Using global land surface models to train the NN constitute an interesting alternative to implement new remote sensing surface datasets. In addition, these datasets can be used to perform data assimilation into the model used as reference for the training. This approach has recently been tested at the European Centre

Improving groundwater storage and soil moisture estimates by assimilating GRACE, SMOS, and SMAP data into CABLE using ensemble Kalman batch smoother and particle batch smoother frameworks

Science.gov (United States)

Han, S. C.; Tangdamrongsub, N.; Yeo, I. Y.; Dong, J.

2017-12-01

Soil moisture and groundwater storage are important information for comprehensive understanding of the climate system and accurate assessment of the regional/global water resources. It is possible to derive the water storage from land surface models but the outputs are commonly biased by inaccurate forcing data, inefficacious model physics, and improper model parameter calibration. To mitigate the model uncertainty, the observation (e.g., from remote sensing as well as ground in-situ data) are often integrated into the models via data assimilation (DA). This study aims to improve the estimation of soil moisture and groundwater storage by simultaneously assimilating satellite observations from the Gravity Recovery And Climate Experiment (GRACE), the Soil Moisture Ocean Salinity (SMOS), and the Soil Moisture Active Passive (SMAP) into the Community Atmosphere Biosphere Land Exchange (CABLE) land surface model using the ensemble Kalman batch smoother (EnBS) and particle batch smoother (PBS) frameworks. The uncertainty of GRACE observation is obtained rigorously from the full error variance-covariance matrix of the GRACE data product. This method demonstrates the use of a realistic representative of GRACE uncertainty, which is spatially correlated in nature, leads to a higher accuracy of water storage computation. Additionally, the comparison between EnBS and PBS results is discussed to understand the filter's performance, limitation, and suitability. The joint DA is demonstrated in the Goulburn catchment, South-East Australia, where diverse ground observations (surface soil moisture, root-zone soil moisture, and groundwater level) are available for evaluation of our DA results. Preliminary results show that both smoothers provide significant improvement of surface soil moisture and groundwater storage estimates. Importantly, our developed DA scheme disaggregates the catchment-scale GRACE information into finer vertical and spatial scales ( 25 km). We present an

Integrating SMOS brightness temperatures with a new conceptual spatially distributed hydrological model for improving flood and drought predictions at large scale.

Science.gov (United States)

Hostache, Renaud; Rains, Dominik; Chini, Marco; Lievens, Hans; Verhoest, Niko E. C.; Matgen, Patrick

2017-04-01

, SUPERFLEX is capable of predicting runoff, soil moisture, and SMOS-like brightness temperature time series. Such a model is traditionally calibrated using only discharge measurements. In this study we designed a multi-objective calibration procedure based on both discharge measurements and SMOS-derived brightness temperature observations in order to evaluate the added value of remotely sensed soil moisture data in the calibration process. As a test case we set up the SUPERFLEX model for the large scale Murray-Darling catchment in Australia ( 1 Million km2). When compared to in situ soil moisture time series, model predictions show good agreement resulting in correlation coefficients exceeding 70 % and Root Mean Squared Errors below 1 %. When benchmarked with the physically based land surface model CLM, SUPERFLEX exhibits similar performance levels. By adapting the runoff routing function within the SUPERFLEX model, the predicted discharge results in a Nash Sutcliff Efficiency exceeding 0.7 over both the calibration and the validation periods.

Ruminal production of methane ''in vitro'' with Coast Cross No. 1 bermuda grass (Cynodon dactylon)

Energy Technology Data Exchange (ETDEWEB)

Geerken, C M; Funes, F; Gonzalez, R

1980-11-01

1. Samples of Coast Cross No. 1 bermuda grass (Cynodon dactylon) of 3, 6, 9, 12 and 15 days of cut, irrigated and fertilized at a rate of 400 kg N/ha/year, were used to determine their bromatological composition, digestibility and methane production ''in vitro''. 2. Crude protein concentration of the pasture fell sharply from 20 to 4% and crude fibre increased from 26 to 34% as the pasture grew older. DM digestibility decreased from 58 to 44% from the 6th to the 15th week of cut. Methane production ''in vitro'' was significantly lower (P is less than 0,01), at 3 and 6 weeks, than that obtained at older ages. The differences were more marked when calculated per unit of digested DM. 3. These results could be of interest in the search of a better utilization of dietary energy for grazing animals. (Refs. 16).

Depleted Uranium Toxicity, Accumulation, and Uptake in Cynodon dactylon (Bermuda) and Aristida purpurea (Purple Threeawn).

Science.gov (United States)

Butler, Afrachanna D; Wynter, Michelle; Medina, Victor F; Bednar, Anthony J

2016-06-01

Yuma Proving Grounds (YPG) in western Arizona is a testing range where Depleted uranium (DU) penetrators have been historically fired. A portion of the fired DU penetrators are being managed under controlled conditions by leaving them in place. The widespread use of DU in armor-penetrating weapons has raised environmental and human health concerns. The present study is focused on the onsite management approach and on the potential interactions with plants local to YPG. A 30 day study was conducted to assess the toxicity of DU corrosion products (e.g., schoepite and meta-schoepite) in two grass species that are native to YPG, Bermuda (Cynodon dactylon) and Purple Threeawn (Aristida purpurea). In addition, the ability for plants to uptake DU was studied. The results of this study show a much lower threshold for biomass toxicity and higher plant concentrations, particularly in the roots than shoots, compared to previous studies.

Direct comparison of {sup 210}Po, {sup 234}Th and POC particle-size distributions and export fluxes at the Bermuda Atlantic Time-series Study (BATS) site

Energy Technology Data Exchange (ETDEWEB)

Stewart, Gillian, E-mail: gstewart@qc.cuny.ed [Queens College, CUNY Flushing, NY 11367 (United States); Moran, S. Bradley, E-mail: moran@gso.uri.ed [Graduate School of Oceanography, URI Narragansett, RI 02882 (United States); Lomas, Michael W., E-mail: Michael.Lomas@bios.ed [Bermuda Institute for Ocean Sciences, St. George' s, GE01 (Bermuda); Kelly, Roger P., E-mail: rokelly@gso.uri.ed [Graduate School of Oceanography, URI Narragansett, RI 02882 (United States)

2011-05-15

Particle-reactive, naturally occurring radionuclides are useful tracers of the sinking flux of organic matter from the surface to the deep ocean. Since the Joint Global Ocean Flux Study (JGOFS) began in 1987, the disequilibrium between {sup 234}Th and its parent {sup 238}U has become widely used as a technique to measure particle export fluxes from surface ocean waters. Another radionuclide pair, {sup 210}Po and {sup 210}Pb, can be used for the same purpose but has not been as widely adopted due to difficulty with accurately constraining the {sup 210}Po/{sup 210}Pb radiochemical balance in the ocean and because of the more time-consuming radiochemical procedures. Direct comparison of particle flux estimated in different ocean regions using these short-lived radionuclides is important in evaluating their utility and accuracy as tracers of particle flux. In this paper, we present paired {sup 234}Th/{sup 238}U and {sup 210}Po/{sup 210}Pb data from oligotrophic surface waters of the subtropical Northwest Atlantic and discuss their advantages and limitations. Vertical profiles of total and particle size-fractionated {sup 210}Po and {sup 234}Th activities, together with particulate organic carbon (POC) concentrations, were measured during three seasons at the Bermuda Atlantic Time-series Study (BATS) site. Both {sup 210}Po and {sup 234}Th reasonably predict sinking POC flux caught in sediment traps, and each tracer provides unique information about the magnitude and efficiency of the ocean's biological pump.

The roles of temperature and light in black band disease (BBD) progression on corals of the genus Diploria in Bermuda.

Science.gov (United States)

Kuehl, Kristin; Jones, Ross; Gibbs, David; Richardson, Laurie

2011-03-01

On Bermuda reefs the brain coral Diploria labyrinthiformis is rarely documented with black band disease (BBD), while BBD-affected colonies of Diploria strigosa are common. D. labyrinthiformis on these reefs may be more resistant to BBD or less affected by prevailing environmental conditions that potentially diminish host defenses. To determine whether light and/or temperature influence BBD differently on these two species, infection experiments were conducted under the following experimental treatments: (1) 26 °C, ambient light; (2) 30 °C, ambient light; (3) 30 °C, low light; and (4) 30 °C, high light. A digital photograph of the affected area of each coral was taken each day for 7 days and analyzed with ImageJ image processing software. The final affected area was not significantly different between species in any of the four treatments. BBD lesions were smaller on both species infected under ambient light at 26 °C versus 30 °C. Low light at 30 °C significantly reduced the lesion size on both species when compared to colonies infected at the same temperature under ambient light. Under high light at 30 °C, BBD lesions were larger on colonies of D. strigosa and smaller on colonies of D. labyrinthiformis when compared to colonies infected under ambient light at the same temperature. The responses of both species suggests that BBD progression on both D. strigosa and D. labyrinthiformis is similarly influenced by a combination of light and temperature and that other factors present before infections become established likely contribute to the difference in BBD prevalence in Bermuda. Copyright © 2010 Elsevier Inc. All rights reserved.

Particulate organic carbon mass distribution at the Bermuda Atlantic Time-series Study (BATS) site

Science.gov (United States)

Gundersen, Kjell; Orcutt, Karen M.; Purdie, Duncan A.; Michaels, Anthony F.; Knap, Anthony H.

Errors in total particulate organic carbon (total POC) measurements caused by particles settling in Niskin water samplers, loss of bacterial cells during filtration and undersampling of rare particles such as the diazotrophic cyanobacterium Trichodesmium spp. were investigated at the Bermuda Atlantic Time-series Study (BATS) site. Regular core samples of temperature, primary production, bacterial abundance, chlorophyll- a (Chl- a) and POC were collected at monthly intervals from 1991 to 1996. During this period of time, shorter investigations of particles settling in water samples (1991-1992), bacterial cells lost during filtration (1992-1993), and Trichodesmium abundance (1995-1996) were performed at the BATS site. The BATS site shows striking seasonal patterns in hydrography and phytoplankton primary productivity, with a strong maximum immediately following the deep winter mixing of the water column. Following the peak in primary production, bacterial abundance showed only slightly elevated levels in spring. Maxima of Chl- a and POC also were associated with the primary production peaks, but these particle concentrations became less pronounced through summer and fall. An average of 26% of total POC collected in Niskin water bottles settled below the spigot before it could be sampled. An average of 47% of all bacterial cells passed the nominal pore size of a Whatman GF/F filter, and total POC measurements generated from GF/F filtered seawater samples had to be corrected for this loss. The average integrated stocks of total POC in the upper 65 m of the water column was 32% pigmented phytoplankton, 15% microheterotrophs, 54% other detrital matter (32 : 15 : 54). Phytoplankton C equaled bacterial C in the 65-135 m depth range (16 : 19 : 65), but phytoplankton C was virtually non-existent deeper than 135 m (2 : 14 : 74). Bacterial C biomass was higher than phytoplankton in surface waters outside the spring bloom period, but carbon not accounted for by phytoplankton

Comparison of SMOS and SMAP Soil Moisture Retrieval Approaches Using Tower-based Radiometer Data over a Vineyard Field

Science.gov (United States)

Miernecki, Maciej; Wigneron, Jean-Pierre; Lopez-Baeza, Ernesto; Kerr, Yann; DeJeu, Richard; DeLannoy, Gabielle J. M.; Jackson, Tom J.; O'Neill, Peggy E.; Shwank, Mike; Moran, Roberto Fernandez;

Eddy-induced Sea Surface Salinity changes in the tropical Pacific

Science.gov (United States)

Delcroix, T. C.; Chaigneau, A.; Soviadan, D.; Boutin, J.

2017-12-01

We analyse the Sea Surface Salinity (SSS) signature of westward propagating mesoscale eddies in the tropical Pacific by collocating 5 years (2010-2015) of SMOS (Soil Moisture and Ocean Salinity) SSS and altimetry-derived sea level anomalies. The main characteristics of mesoscale eddies are first identified in SLA maps. Composite analyses in the Central and Eastern ITCZ regions then reveal regionally dependent impacts with opposite SSS anomalies for the cyclonic and anticyclonic eddies. In the Central region (where we have the largest meridional SSS gradient), we found dipole-like SSS changes with maximum anomalies on the leading edge of the eddy. In the Eastern region (where we have the largest near-surface vertical salinity gradient) we found monopole-like SSS changes with maximum anomalies in the eddy centre. These dipole/monopole patterns and the rotational sense of eddies suggest the dominant role of horizontal and vertical advection in the Central and Eastern ITCZ regions, respectively.

On-site hydrolytic enzymes production from fungal co-cultivation of Bermuda grass and corn cob.

Science.gov (United States)

Amaro-Reyes, Aldo; Gracida, Jorge; Huizache-Peña, Nelson; Elizondo-García, Norberto; Salazar-Martínez, José; García Almendárez, Blanca E; Regalado, Carlos

2016-07-01

Solid state fermentation (SSF) is used to produce industrial enzymes. The objective of this study was to use a co-culture of Aspergillus niger GS1 and Trichoderma reesei, grown on a mixture of Bermuda grass and corn cob to obtain fermented forage (FF) rich in hydrolytic enzymes, as a value added ingredient for animal feed. FPase, amylase and xylanase productivities (dry matter, DM) were 8.8, 181.4, and 42.1Ug(-1)h(-1), respectively (1U=reducing sugars released min(-1)), after 12-16h of SSF with C/N=60. Cellulose, hemicellulose and lignin decreased 1.6-, 2.7- and 1.9-fold (DM), respectively. In vitro ruminal and true digestibility of DM was improved 2.4- and 1.4-fold. Ruminal digestion of FF reduced 1.32-fold the acetate:propionate ratio, which may reduce the environmental impact of ruminants feeding. On-site hydrolytic enzymes productivity using SSF without enzymes extraction could be of economic potential for digestibility improvement in animal feed. Copyright © 2016 Elsevier Ltd. All rights reserved.

Environmental assessment of metal exposure to corals living in Castle Harbour, Bermuda

Science.gov (United States)

Prouty, N.G.; Goodkin, N.F.; Jones, R.; Lamborg, C.H.; Storlazzi, C.D.; Hughen, K.A.

2013-01-01

Environmental contamination in Castle Harbour, Bermuda, has been linked to the dissolution and leaching of contaminants from the adjacent marine landfill. This study expands the evidence for environmental impact of leachate from the landfill by quantitatively demonstrating elevated metal uptake over the last 30 years in corals growing in Castle Harbour. Coral Pb/Ca, Zn/Ca and Mn/Ca ratios and total Hg concentrations are elevated relative to an adjacent control site in John Smith's Bay. The temporal variability in the Castle Harbour coral records suggests that while the landfill has increased in size over the last 35 years, the dominant input of metals is through periodic leaching of contaminants from the municipal landfill and surrounding sediment. Elevated contaminants in the surrounding sediment suggest that resuspension is an important transport medium for transferring heavy metals to corals. Increased winds, particularly during the 1990s, were accompanied by higher coral metal composition at Castle Harbour. Coupled with wind-induced resuspension, interannual changes in sea level within the Harbour can lead to increased bioavailability of sediment-bound metals and subsequent coral metal assimilation. At John Smith's Bay, large scale convective mixing may be driving interannual metal variability in the coral record rather than impacts from land-based activities. Results from this study provide important insights into the coupling of natural variability and anthropogenic input of contaminants to the nearshore environment.

Geochemistry of Slow-Growing Corals: Reconstructing Sea Surface Temperature, Salinity and the North Atlantic Oscillation

Science.gov (United States)

2007-06-01

Number 8, October 1989) The island of Bermuda (64°W, 32°N) (Fig. 1.3) located in the western sub- tropical Atlantic is an excellent location for examining...lobata at Clipperton Atoll, Coral Reefv, 18, 13-27, 1999. Lough, J. M., A strategy to improve the contribution of coral data to high-resolution...to evaluate winter Sr/Ca. The island of Bermuda (64°W, 32°N) is located in the Sargasso Sea in the sub-tropical North Atlantic. This site is

L-band Dielectric Constant Measurements of Seawater (Oral presentation and SMOS Poster)

Science.gov (United States)

Lang, Roger H.; Utku, Cuneyt; LeVine, David M.

2003-01-01

This paper describes a resonant cavity technique for the measurement of the dielectric constant of seawater as a function of its salinity. Accurate relationships between salinity and dielectric constant (which determines emissivity) are needed for sensor systems such as SMOS and Aquarius that will monitor salinity from space in the near future. The purpose of the new measurements is to establish the dependence of the dielectric constant of seawater on salinity in contemporary units (e.g. psu) and to take advantage of modern instrumentation to increase the accuracy of these measurements. The measurement device is a brass cylindrical cavity 16cm in diameter and 7cm in height. The seawater is introduced into the cavity through a slender glass tube having an inner diameter of 0.1 mm. By assuming that this small amount of seawater slightly perturbs the internal fields in the cavity, perturbation theory can be employed. A simple formula results relating the real part of the dielectric constant to the change in resonant frequency of the cavity. In a similar manner, the imaginary part of the dielectric constant is related to the change in the cavity s Q. The expected accuracy of the cavity technique is better than 1% for the real part and 1 to 2% for the imaginary part. Presently, measurements of methanol have been made and agree with precision measurements in the literature to within 1% in both real and imaginary parts. Measurements have been made of the dielectric constant of seawater samples from Ocean Scientific in the United Kingdom with salinities of 10, 30, 35 and 38 psu. All measurements were made at room temperature. Plans to make measurements at a range of temperatures and salinities will be discussed.

Oxidative modifications, mitochondrial dysfunction, and impaired protein degradation in Parkinson's disease: how neurons are lost in the Bermuda triangle

Directory of Open Access Journals (Sweden)

Malkus Kristen A

2009-06-01

Full Text Available Abstract While numerous hypotheses have been proposed to explain the molecular mechanisms underlying the pathogenesis of neurodegenerative diseases, the theory of oxidative stress has received considerable support. Although many correlations have been established and encouraging evidence has been obtained, conclusive proof of causation for the oxidative stress hypothesis is lacking and potential cures have not emerged. Therefore it is likely that other factors, possibly in coordination with oxidative stress, contribute to neuron death. Using Parkinson's disease (PD as the paradigm, this review explores the hypothesis that oxidative modifications, mitochondrial functional disruption, and impairment of protein degradation constitute three interrelated molecular pathways that execute neuron death. These intertwined events are the consequence of environmental exposure, genetic factors, and endogenous risks and constitute a "Bermuda triangle" that may be considered the underlying cause of neurodegenerative pathogenesis.

Soil Moisture Data Assimilation in the NASA Land Information System for Local Modeling Applications and Improved Situational Awareness

Science.gov (United States)

Case, Jonathan L.; Blakenship, Clay B.; Zavodsky, Bradley T.

2014-01-01

As part of the NASA Soil Moisture Active Passive (SMAP) Early Adopter (EA) program, the NASA Shortterm Prediction Research and Transition (SPoRT) Center has implemented a data assimilation (DA) routine into the NASA Land Information System (LIS) for soil moisture retrievals from the European Space Agency's Soil Moisture Ocean Salinity (SMOS) satellite. The SMAP EA program promotes application-driven research to provide a fundamental understanding of how SMAP data products will be used to improve decision-making at operational agencies. SPoRT has partnered with select NOAA/NWS Weather Forecast Offices (WFOs) that use output from a real-time regional configuration of LIS, without soil moisture DA, to initialize local numerical weather prediction (NWP) models and enhance situational awareness. Improvements to local NWP with the current LIS have been demonstrated; however, a better representation of the land surface through assimilation of SMOS (and eventually SMAP) retrievals is expected to lead to further model improvement, particularly during warm-season months. SPoRT will collaborate with select WFOs to assess the impact of soil moisture DA on operational forecast situations. Assimilation of the legacy SMOS instrument data provides an opportunity to develop expertise in preparation for using SMAP data products shortly after the scheduled launch on 5 November 2014. SMOS contains a passive L-band radiometer that is used to retrieve surface soil moisture at 35-km resolution with an accuracy of 0.04 cu cm cm (exp -3). SMAP will feature a comparable passive L-band instrument in conjunction with a 3-km resolution active radar component of slightly degraded accuracy. A combined radar-radiometer product will offer unprecedented global coverage of soil moisture at high spatial resolution (9 km) for hydrometeorological applications, balancing the resolution and accuracy of the active and passive instruments, respectively. The LIS software framework manages land surface model

Water type and irrigation time effects on microbial metabolism of a soil cultivated with Bermuda-grass Tifton 85

Directory of Open Access Journals (Sweden)

Sandra Furlan Nogueira

2011-06-01

Full Text Available This study investigated the microbial metabolism in Bermuda-grass Tifton 85 areas after potable-water and effluent irrigation treatments. The experiment was carried out in Lins/SP with samples taken in the rainy and dry seasons (2006 after one year and three years of irrigation management, and set up on an entirely randomized block design with four treatments: C (control, without irrigation or fertilization, PW (potable water + 520 kg of N ha-1 year-1; TE3 and TE0 (treated effluent + 520 kg of N ha-1 year-1 for three years and one year, respectively. The parameters determined were: microbial biomass carbon, microbial activity, and metabolic quotient. Irrigation with wastewater after three years indicated no alteration in soil quality for C and ET3; for PW, a negative impact on soil quality (microbial biomass decrease suggested that water-potable irrigation in Lins is not an adequate option. Microbial activity alterations observed in TE0 characterize a priming effect.

Air-sea fluxes and satellite-based estimation of water masses formation

Science.gov (United States)

Sabia, Roberto; Klockmann, Marlene; Fernandez-Prieto, Diego; Donlon, Craig

2015-04-01

Recent work linking satellite-based measurements of sea surface salinity (SSS) and sea surface temperature (SST) with traditional physical oceanography has demonstrated the capability of generating routinely satellite-derived surface T-S diagrams [1] and analyze the distribution/dynamics of SSS and its relative surface density with respect to in-situ measurements. Even more recently [2,3], this framework has been extended by exploiting these T-S diagrams as a diagnostic tool to derive water masses formation rates and areas. A water mass describes a water body with physical properties distinct from the surrounding water, formed at the ocean surface under specific conditions which determine its temperature and salinity. The SST and SSS (and thus also density) at the ocean surface are largely determined by fluxes of heat and freshwater. The surface density flux is a function of the latter two and describes the change of the density of seawater at the surface. To obtain observations of water mass formation is of great interest, since they serve as indirect observations of the thermo-haline circulation. The SSS data which has become available through the SMOS [4] and Aquarius [5] satellite missions will provide the possibility of studying also the effect of temporally-varying SSS fields on water mass formation. In the present study, the formation of water masses as a function of SST and SSS is derived from the surface density flux by integrating the latter over a specific area and time period in bins of SST and SSS and then taking the derivative of the total density flux with respect to density. This study presents a test case using SMOS SSS, OSTIA SST, as well as Argo ISAS SST and SSS for comparison, heat fluxes from the NOCS Surface Flux Data Set v2.0, OAFlux evaporation and CMORPH precipitation. The study area, initially referred to the North Atlantic, is extended over two additional ocean basins and the study period covers the 2011-2012 timeframe. Yearly, seasonal

Development and Assessment of the Sand Dust Prediction Model by Utilizing Microwave-Based Satellite Soil Moisture and Reanalysis Datasets in East Asian Desert Areas

Directory of Open Access Journals (Sweden)

Hyunglok Kim

2017-01-01

Full Text Available For several decades, satellite-based microwave sensors have provided valuable soil moisture monitoring in various surface conditions. We have first developed a modeled aerosol optical depth (AOD dataset by utilizing Soil Moisture and Ocean Salinity (SMOS, Advanced Microwave Scanning Radiometer 2 (AMSR2, and the Global Land Data Assimilation System (GLDAS soil moisture datasets in order to estimate dust outbreaks over desert areas of East Asia. Moderate Resolution Imaging Spectroradiometer- (MODIS- based AOD products were used as reference datasets to validate the modeled AOD (MA. The SMOS-based MA (SMOS-MA dataset showed good correspondence with observed AOD (R-value: 0.56 compared to AMSR2- and GLDAS-based MA datasets, and it overestimated AOD compared to observed AOD. The AMSR2-based MA dataset was found to underestimate AOD, and it showed a relatively low R-value (0.35 with respect to observed AOD. Furthermore, SMOS-MA products were able to simulate the short-term AOD trends, having a high R-value (0.65. The results of this study may allow us to acknowledge the utilization of microwave-based soil moisture datasets for investigation of near-real time dust outbreak predictions and short-term dust outbreak trend analysis.

Coincident Retrieval of Ocean Surface Roughness and Salinity Using Airborne and Satellite Microwave Radiometry and Reflectometry Measurements during the Carolina Offshore (Caro) Experiment.

Science.gov (United States)

Burrage, D. M.; Wesson, J. C.; Wang, D. W.; Garrison, J. L.; Zhang, H.

2017-12-01

The launch of the Cyclone Global Navigation Satellite System (CYGNSS) constellation of 8 microsats carrying GPS L-band reflectometers on 15 Dec., 2016, and continued operation of the L-band radiometer on the European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite, allow these complementary technologies to coincidentally retrieve Ocean surface roughness (Mean Square Slope, MSS), Surface Wind speed (WSP), and Sea Surface Salinity (SSS). The Carolina Offshore (Caro) airborne experiment was conducted jointly by NRL SSC and Purdue University from 7-11 May, 2017 with the goal of under-flying CYGNSS and SMOS and overflying NOAA buoys, to obtain high-resolution reflectometer and radiometer data for combined retrieval of MSS, SSS and WSP on the continental shelf. Airborne instruments included NRL's Salinity Temperature and Roughness Remote Scanner (STARRS) L-, C- and IR-band radiometer system, and a 4-channel dual-pol L-band (GPS) and S-band (XM radio) reflectometer, built by Purdue University. Flights either crossed NOAA buoys on various headings, or intersected with specular point ground tracks at predicted CYGNSS overpass times. Prevailing winds during Caro were light to moderate (1-8 m/s), so specular returns dominated the reflectometer Delay Doppler Maps (DDMs), and MSS was generally low. In contrast, stronger winds (1-12 m/s) and rougher seas (wave heights 1-5 m) were experienced during the preceding Maine Offshore (Maineo) experiment in March, 2016. Several DDM observables were used to retrieve MSS and WSP, and radiometer brightness temperatures produced Sea Surface Temperature (SST), SSS and also WSP estimates. The complementary relationship of Kirchoff's formula e+r=1, between radiometric emissivity, e, and reflectivity, r, was exploited to seek consistent estimates of MSS, and use it to correct the SSS retrievals for sea surface roughness effects. The relative performance and utility of the various airborne and satellite retrieval algorithms

Organic geochemistry and pore water chemistry of sediments from Mangrove Lake, Bermuda

Science.gov (United States)

Hatcher, P.G.; Simoneit, B.R.T.; MacKenzie, F.T.; Neumann, A.C.; Thorstenson, D.C.; Gerchakov, S.M.

1982-01-01

Mangrove Lake, Bermuda, is a small coastal, brackish-water lake that has accumulated 14 m of banded, gelatinous, sapropelic sediments in less than 104 yr. Stratigraphic evidence indicates that Mangrove Lake's sedimentary environment has undergone three major depositional changes (peat, freshwater gel, brackish-water gel) as a result of sea level changes. The deposits were examined geochemically in an effort to delineate sedimentological and diagenetic changes. Gas and pore water studies include measurements of sulfides, ammonia, methane, nitrogen gas, calcium, magnesium, chloride, alkalinity, and pH. Results indicate that sulfate reduction is complete, and some evidence is presented for bacterial denitrification and metal sulfide precipitation. The organic-rich sapropel is predominantly algal in origin, composed mostly of carbohydrates and insoluble macromolecular organic matter called humin with minor amounts of proteins, lipids, and humic acids. Carbohydrates and proteins undergo hydrolysis with depth in the marine sapropel but tend to be preserved in the freshwater sapropel. The humin, which has a predominantly aliphatic structure, increases linearly with depth and composes the greatest fraction of the organic matter. Humic acids are minor components and are more like polysaccharides than typical marine humic acids. Fatty acid distributions reveal that the lipids are of an algal and/or terrestrial plant source. Normal alkanes with a total concentration of 75 ppm exhibit two distribution maxima. One is centered about n-C22 with no odd/even predominance, suggestive of a degraded algal source. The other is centered at n-C31 with a distinct odd/even predominance indicative of a vascular plant origin. Stratigraphic changes in the sediment correlate to observed changes in the gas and pore water chemistry and the organic geochemistry. ?? 1982.

Quality Improvement of the Satellite Soil Moisture Products by Fusing In Situ and GNSS-R Observation

Science.gov (United States)

Yuan, Q.; Xu, H.; Li, T.; Shen, H.; Zhang, L.

2017-12-01

Soil moisture plays a fundamental role in the hydrological cycle as well as in the energy partitioning. On this basis, it is of great concern to derive a long-term soil moisture time series on a global scale and monitor its temporal and spatial variations for practical applications. Although passive and active microwave satellites have been shown to provide useful retrievals of near-surface soil moisture at regional and global scales, the limitations in retrieval accuracy prevent them from high-quality applications in specific areas. On the other hand, measuring soil moisture straightly through in situdevices, such as soil moisture probes, is high accuracy, but is not able to derive global soil moisture maps. Recently, the ground-based GNSS-R method is emerging in monitoring near-surface soil moisture variations but still over limited spatial scales. In this paper, a multi-source data fusion method was applied to synthesize regional high-quality soil moisture products from 2015 to 2017 in western parts of the continental United States. Firstly, we put all the three soil moisture datasets into the generalized regression neural network (GRNN) model. The input signals of the model are SMOS and SMAP satellite-derived passive level 3 soil moisture daily products combined with date and latitude and longitude information, while the in situ measured and GNSS-R retrieved soil moisture are used as target. Finally, we apply the model to all the soil moisture time series in the experiment area and obtain two high-quality regional soil moisture products for SMOS and SMAP, respectively. The results before fusion show that the correlation coefficients between site-specific soil moisture and satellite-derived soil moisture are 0.39 for SMOS and 0.27 for SMAP and that unbiased root-mean-square errors (ubRMSE) are 0.113 for SMOS and 0.128 for SMAP, respectively. After applying the GRNN-R, the model fitted correlation coefficients have reached 0.72 for SMOS and 0.75 for SMAP and the

Seasonal and interannual variability in deep ocean particle fluxes at the Oceanic Flux Program (OFP)/Bermuda Atlantic Time Series (BATS) site in the western Sargasso Sea near Bermuda

Science.gov (United States)

Conte, Maureen H.; Ralph, Nate; Ross, Edith H.

Since 1978, the Oceanic Flux Program (OFP) time-series sediment traps have measured particle fluxes in the deep Sargasso Sea near Bermuda. There is currently a 20+yr flux record at 3200-m depth, a 12+yr flux at 1500-m depth, and a 9+yr record at 500-m depth. Strong seasonality is observed in mass flux at all depths, with a flux maximum in February-March and a smaller maximum in December-January. There is also significant interannual variability in the flux, especially with respect to the presence/absence of the December-January flux maximum and in the duration of the high flux period in the spring. The flux records at the three depths are surprisingly coherent, with no statistically significant temporal lag between 500 and 3200-m fluxes at our biweekly sample resolution. Bulk compositional data indicate an extremely rapid decrease in the flux of organic constituents with depth between 500 and 1500-m, and a smaller decrease with depth between 1500 and 3200-m depth. In contrast, carbonate flux is uniform or increases slightly between 500 and 1500-m, possibly reflecting deep secondary calcification by foraminifera. The lithogenic flux increases by over 50% between 500 and 3200-m depth, indicating strong deep water scavenging/repackaging of suspended lithogenic material. Concurrent with the rapid changes in flux composition, there is a marked reduction in the heterogeneity of the sinking particle pool with depth, especially within the mesopelagic zone. By 3200-m depth, the bulk composition of the sinking particle pool is strikingly uniform, both seasonally and over variations in mass flux of more than an order of magnitude. These OFP results provide strong indirect evidence for the intensity of reprocessing of the particle pool by resident zooplankton within mesopelagic and bathypelagic waters. The rapid loss of organic components, the marked reduction in the heterogeneity of the bulk composition of the flux, and the increase in terrigenous fluxes with depth are most

Summary of Meteorological Observations, Surface (SMOS) Pensacola, Florida.

Science.gov (United States)

1978-07-01

flSV~MAYN IC’~4~ ~~~ ) ‘) .) ‘ - J IISPS -LS0I 151,1 I — — — _ — ________— — — -~~ -~~ ~~~~~~~~~~~~~~~~~~~~ -, I F~~~ ’ ~~~~~~~~~~~ —~~ . ~~ J-~4S

Summary of Meteorological Observations, Surface (SMOS), Midway Island.

Science.gov (United States)

1984-08-01

7. 2 r 2?.2 II00 1Z. . 56*4 57*7 57.2 57.2 S77.2 .27. 5 577 57𔃻 2 . 5’ 7. 2 >lo0om 12. 5 . " Se~ 56 5 58 8’ AIsi 18 s808 584R 5F .3 58 sp.8 sa.ti...3.6 *3.6 4*6 4.3o6 43.6 439b 46306 ; 12000 41.*. 43. 43.6 43.6 *.1 441.1 4. 1 4*01 4*1 44.1 4*.1 44.1 4*.1 4*.1 4.1 44.1 >oooo IF0 ,40 4140 4. 1 4.4

A bare ground evaporation revision in the ECMWF land-surface scheme: evaluation of its impact using ground soil moisture and satellite microwave data

Directory of Open Access Journals (Sweden)

C. Albergel

2012-10-01

Full Text Available In situ soil moisture data from 122 stations across the United States are used to evaluate the impact of a new bare ground evaporation formulation at ECMWF. In November 2010, the bare ground evaporation used in ECMWF's operational Integrated Forecasting System (IFS was enhanced by adopting a lower stress threshold than for the vegetation, allowing a higher evaporation. It results in more realistic soil moisture values when compared to in situ data, particularly over dry areas. Use was made of the operational IFS and offline experiments for the evaluation. The latter are based on a fixed version of the IFS and make it possible to assess the impact of a single modification, while the operational analysis is based on a continuous effort to improve the analysis and modelling systems, resulting in frequent updates (a few times a year. Considering the field sites with a fraction of bare ground greater than 0.2, the root mean square difference (RMSD of soil moisture is shown to decrease from 0.118 m³ m⁻³ to 0.087 m³ m⁻³ when using the new formulation in offline experiments, and from 0.110 m³ m⁻³ to 0.088 m³ m⁻³ in operations. It also improves correlations. Additionally, the impact of the new formulation on the terrestrial microwave emission at a global scale is investigated. Realistic and dynamically consistent fields of brightness temperature as a function of the land surface conditions are required for the assimilation of the SMOS data. Brightness temperature simulated from surface fields from two offline experiments with the Community Microwave Emission Modelling (CMEM platform present monthly mean differences up to 7 K. Offline experiments with the new formulation present drier soil moisture, hence simulated brightness temperature with its surface fields are larger. They are also closer to SMOS remotely sensed brightness temperature.

Uncertainty Quantification of GEOS-5 L-band Radiative Transfer Model Parameters Using Bayesian Inference and SMOS Observations

Science.gov (United States)

DeLannoy, Gabrielle J. M.; Reichle, Rolf H.; Vrugt, Jasper A.

2013-01-01

Uncertainties in L-band (1.4 GHz) radiative transfer modeling (RTM) affect the simulation of brightness temperatures (Tb) over land and the inversion of satellite-observed Tb into soil moisture retrievals. In particular, accurate estimates of the microwave soil roughness, vegetation opacity and scattering albedo for large-scale applications are difficult to obtain from field studies and often lack an uncertainty estimate. Here, a Markov Chain Monte Carlo (MCMC) simulation method is used to determine satellite-scale estimates of RTM parameters and their posterior uncertainty by minimizing the misfit between long-term averages and standard deviations of simulated and observed Tb at a range of incidence angles, at horizontal and vertical polarization, and for morning and evening overpasses. Tb simulations are generated with the Goddard Earth Observing System (GEOS-5) and confronted with Tb observations from the Soil Moisture Ocean Salinity (SMOS) mission. The MCMC algorithm suggests that the relative uncertainty of the RTM parameter estimates is typically less than 25 of the maximum a posteriori density (MAP) parameter value. Furthermore, the actual root-mean-square-differences in long-term Tb averages and standard deviations are found consistent with the respective estimated total simulation and observation error standard deviations of m3.1K and s2.4K. It is also shown that the MAP parameter values estimated through MCMC simulation are in close agreement with those obtained with Particle Swarm Optimization (PSO).

Apparent oxygen utilization rates calculated from tritium and helium-3 profiles at the Bermuda Atlantic Time-series Study site

Directory of Open Access Journals (Sweden)

R. H. R. Stanley

2012-06-01

Full Text Available We present three years of Apparent Oxygen Utilization Rates (AOUR estimated from oxygen and tracer data collected over the ocean thermocline at monthly resolution between 2003 and 2006 at the Bermuda Atlantic Time-series Study (BATS site. We estimate water ages by calculating a transit time distribution from tritium and helium-3 data. The vertically integrated AOUR over the upper 500 m, which is a regional estimate of export, during the three years is 3.1 ± 0.5 mol O₂ m⁻² yr⁻¹. This is comparable to previous AOUR-based estimates of export production at the BATS site but is several times larger than export estimates derived from sediment traps or ²³⁴Th fluxes. We compare AOUR determined in this study to AOUR measured in the 1980s and show AOUR is significantly greater today than decades earlier because of changes in AOU, rather than changes in ventilation rates. The changes in AOU are likely a methodological artefact associated with problems with early oxygen measurements.

Correlation of Coral Bleaching Events and Remotely-Sensed Sea Surface Temperatures

Science.gov (United States)

1994-05-19

water column. Diving on the reefs, they found significant tracts of bleached corals, zoanthids , gorgonians, and sea anemones (Bunckley-Williams and... zoanthids between May and July 1988 on shallow lagoonal reefs and rim margin reefs was the first indication of any sort of bleaching event at Bermuda

An Intercomparison of ERS-Scat, AMSR-E Soil Moisture Observations with Model Simulations over France

NARCIS (Netherlands)

Rudiger, C.; Calvet, J.C.; Gruhier, C.; Holmes, T.R.H.; de Jeu, R.A.M.; Wagner, W.W.

2009-01-01

This paper presents a study undertaken in preparation of the work leading up to the assimilation of Soil Moisture and Ocean Salinity (SMOS) observations into the land surface model (LSM) Interaction Soil Biosphere Atmosphere (ISBA) at Météo-France. This study consists of an intercomparison

The airborne EMIRAD L-band radiometer system

DEFF Research Database (Denmark)

Søbjærg, Sten Schmidl; Kristensen, Steen Savstrup; Balling, Jan E.

2013-01-01

). The EMIRAD system has been installed on three different airborne platforms for measurements of sea surface signatures and salinity, soil moisture, and the homogeneity of the Antarctic SMOS calibration site. The installations are shown in the paper, and some major results for ocean and ice observations...

The Oceanic Flux Program: A three decade time-series of particle flux in the deep Sargasso Sea

Science.gov (United States)

Weber, J. C.; Conte, M. H.

2010-12-01

The Oceanic Flux Program (OFP), 75 km SE of Bermuda, is the longest running time-series of its kind. Initiated in 1978, the OFP has produced an unsurpassed, nearly continuous record of temporal variability in deep ocean fluxes, with a >90% temporal coverage at 3200m depth. The OFP, in conjunction with the co-located Bermuda-Atlantic Time Series (BATS) and the Bermuda Testbed Mooring (BTM) time-series, has provided key observations enabling detailed assessment of how seasonal and non-seasonal variability in the deep ocean is linked with the overlying physical and biogeochemical environment. This talk will focus on the short-term flux variability that overlies the seasonal flux pattern in the Sargasso Sea, emphasizing episodic extreme flux events. Extreme flux events are responsible for much of the year-to-year variability in mean annual flux and are most often observed during early winter and late spring when surface stratification is weak or transient. In addition to biological phenomena (e.g. salp blooms), passage of productive meso-scale features such as eddies, which alter surface water mixing characteristics and surface export fluxes, may initiate some extreme flux events. Yet other productive eddies show a minimal influence on the deep flux, underscoring the importance of upper ocean ecosystem structure and midwater processes on the coupling between the surface ocean environment and deep fluxes. Using key organic and inorganic tracers, causative processes that influence deep flux generation and the strength of the coupling with the surface ocean environment can be identified.

Summary of Meteorological Observations, Surface (SMOS) for Diego Garcia

Science.gov (United States)

1989-04-01

01 ,L A L c acca , 0O𔃺 0O 0: 1- U 0I 0IDJ - cc C aj Go w Go )co 000) Goaaa a0 7 ,0, 0101 a,01 0 ’C a W I u ( 011 -.) U 0 mN 010 0 n00mmwonr -ma w...0 0 f𔃺 0 0’ al z I - -. 3 -:)~.~30 . f3 333 3 U.5 . a:-- - P t0 OP-fJU)L -C )0 I 7 ar r- OD’)’J. CID-0 C’~ 0~ OOO 00’I DC)C o c 4 0 O O O ’ Q- I tu...rnu0 - U. CZ. - 00 00 0 3 t0 tr- OD00 C3N rZ303 M A0 ’ O 0 0’ 0 C,0 ,0 ’A/ U.1 D I 3’ ’r10 0 0 0 O O ,n 0 1-U.iU DA 0- f G D0 0 r- GO010 rNl U f3 ~ .3

Summary of Meteorological Observations, Surface (SMOS) Beaufort, South Carolina.

Science.gov (United States)

1984-08-01

I -- NIAVAL WEATHER SERVICE DETACHMENT, ASHEVILLE. NC CEILING VERSUS VISIBILITY PERCENTAGE FREQUENCY OF OCCURRENCE (FROM HOURLY OBSERVATIONS)- aISI ...f__90_ 640__ -4- -16 6-6 -iie -4. -64.. ___ * OLI 14001: 4140 534’ 59’ 1 ! 1 . 3 . 30 bit, 64 60 b ik 5.s t a km 3190, 6E9A 76., 79. 80. also Also 2

Chemostratigraphy at DSDP Sites 386 (Bermuda Rise) and 144 (Demerara Rise), Implications for Euxinic Conditions During OAE-2

Science.gov (United States)

Horst, P. A.; Maurrasse, F. J.; Sinninghe-Damsté, J. S.; Sandler, A.

2008-05-01

Chemostratigraphic studies of DSDP Site 386 on the Bermuda Rise and Site 144 on the Demerara Rise indicate that euxinic conditions developed at these deep-water sites during the time interval that corresponds to Oceanic Anoxic Event 2 (OAE 2). The data show a large increase in Fe/Al ratios, and dispersed pyrite aggregates (Site 386 Core 43, Section 3). Such findings at these deep oceanic sites are compatible with earlier studies showing that sediments in euxinic settings display increases in Fe/Al ratios due to the scavenging of dissolved Fe, and is also in agreement with previous Pr/Ph ratio of cyanobacteria showing low thermal stress, supporting in situ derivation. Elemental analyses at Site 386 also show that relatively high Sr/CaO ratios are present before and after OAE 2, indicating an increased contribution of biogenic carbonates, but not during the C/T boundary event. When Cr is plotted against Al2O3 in conjunction with a solid line representing the Cr/Al2O3 ratio in average shale, half of the samples fall above and half fall below this line. The values that plot above this line are all from Cores 47, 44, 43, and 42, which contain higher TOC. Their strong Cr enrichment with respect to the average shale can be indicative of an algal source of the OM, as this biota preferentially concentrates Cr. Competitive exclusion due to dominance of opportunistic prokaryotic blooms in combination with oxygen depletion can be invoked to explain the conditions that developed and were unfavorable to most other organisms throughout the water column during OAE 2. Sediments from DSDP Site 144 also reveal increased molecular fossils indicative of green sulfur bacteria, which are further characteristic of euxinic conditions (Kuypers et al., 2002; Forster et al., 2004). These results are in agreement with earlier works that showed lipids at DSDP Site 144 are predominantly of an autochthonous origin with primary production as the dominant source (Simoneit and Stuermer, 1982

Sea surface temperature 1871-2099 in 38 cells in the Caribbean region.

Science.gov (United States)

Sheppard, Charles; Rioja-Nieto, Rodolfo

2005-09-01

Sea surface temperature (SST) data with monthly resolution are provided for 38 cells in the Caribbean Sea and Bahamas region, plus Bermuda. These series are derived from the HadISST1 data set for historical time (1871-1999) and from the HadCM3 coupled climate model for predicted SST (1950-2099). Statistical scaling of the forecast data sets are performed to produce confluent SST series according to a now established method. These SST series are available for download. High water temperatures in 1998 killed enormous amounts of corals in tropical seas, though in the Caribbean region the effects at that time appeared less marked than in the Indo-Pacific. However, SSTs are rising in accordance with world-wide trends and it has been predicted that temperature will become increasingly important in this region in the near future. Patterns of SST rise within the Caribbean region are shown, and the importance of sub-regional patterns within this biologically highly interconnected area are noted.

Remote radiological assessment in the marine environment: SMOS and MODIS observations combined to {sup 137}Cs activity concentrations in the Aegean Sea - Greece - Remote radiological assessment in the marine environment: SMOS observations combined TO Cs-137 activity concentrations in the Aegean Sea Greece

Energy Technology Data Exchange (ETDEWEB)

Florou, H.; Tzempelikou, E. [NCSR ' Demokritos' , Institute of Nuclear and Radiological Sciences and Technology, Energy and Safety, Aghia Paraskevi 15310, POB 60037, Attiki (Greece); Sykioti, O. [National Observatory of Athens, Institute for Astronomy, Astrophysics, Space Applications and Remote Sensing, Vas. Pavlou and I. Metaxa, 15236 Penteli, Greece, Athens (Greece); Evangeliou, N. [CEA-CNRS-UVSQ UMR 8212, IPSL/LSCE Gif-sur-Yvette Cedex (France); Mavrokefalou, G. [Harokopio University, Department of Geography, 70 El. Venizelou, Kallithea, 17671, Athens (Greece)

2014-07-01

The capability of ordinary earth-observational satellites to record changes of ecological parameters in the environment is well documented. Nevertheless, radionuclide dispersion cannot be detected by the installed devices directly. However, the levels of radionuclides in the marine environment, especially for the soluble ones, are associated with other physical and chemical parameters of the natural environment (e.g. temperature/evaporation, water density, salinity etc). It is well known that marine dynamic processes, like horizontal advection and vertical mixing, control distribution of radionuclides in waters. The water density controls the transport of water masses among basins, which results to trans-boundary radioactive contamination. On the other hand, salinity and temperature control the water density and consequently is a major parameter for the marine radiological assessment. Nevertheless, salinity is a critical index for weathering and anthropogenic influences in the marine environment such as rainfall, evaporation, river runoff, global fallout, accidental releases, inter-regional contamination through current circulation, which are potential impact sources for the marine environment. In the present study, the activity concentrations of {sup 137}Cs in the Aegean Sea Greece combined to SMOS data are treated and simulated to models as to develop an innovative tool for the remote radioactivity detecting either for routine observations and emergency recording. Besides, the integrated by space and time field measurements to the respective satellite observations of salinity variations will create a model, which might be also applicable for the prediction of the radiological impact of potential accidental events. This presentation is the first footprint of this research under the coordinated Project AOSMOS.4681 ESA, being carried out in NOA and NCSR'D'. (authors)

Soil moisture remote sensing: State of the science

Science.gov (United States)

Satellites (e.g., SMAP, SMOS) using passive microwave techniques, in particular at L band frequency, have shown good promise for global mapping of near-surface (0-5 cm) soil moisture at a spatial resolution of 25-40 km and temporal resolution of 2-3 days. C- and X-band soil moisture records date bac...

An international marine-atmospheric 222Rn measurement intercomparison in Bermuda. Part 2: Results for the participating laboratories

International Nuclear Information System (INIS)

Colle, R.; Unterweger, M.P.; Hutchinson, J.M.R.

1996-01-01

As part of an international measurement intercomparison of instruments used to measure atmospheric 222 Rn, four participating laboratories made nearly simultaneous measurements of 222 Rn activity concentration in commonly sampled, ambient air over approximately a 2 week period, and three of these four laboratories participated in the measurement comparison of 14 introduced samples with known, but undisclosed (blind) 222 Rn activity concentration. The exercise was conducted in Bermuda in October 1991. The 222 Rn activity concentrations in ambient Bermudian air over the course of the intercomparison ranged from a few hundredths of a Bq · m -3 to about 2 Bq · m -3 , while the standardized sample additions covered a range from approximately 2.5 Bq · m -3 to 35 Bq · m -3 . The overall uncertainty in the latter concentrations was in the general range of 10%, approximating a 3 standard deviation uncertainty interval. The results of the intercomparison indicated that two of the laboratories were within very good agreement with the standard additions, and almost within expected statistical variations. These same two laboratories, however, at lower ambient concentrations, exhibited a systematic difference with an averaged offset of roughly 0.3 Bq · m -3 . The third laboratory participating in the measurement of standardized sample additions was systematically low by about 65% to 70%, with respect to the standard addition which was also confirmed in their ambient air concentration measurements. The fourth laboratory, participating in only the ambient measurement part of the intercomparison, was also systematically low by at least 40% with respect to the first two laboratories

An experimental model of allergic asthma in cats sensitized to house dust mite or bermuda grass allergen.

Science.gov (United States)

Norris Reinero, Carol R; Decile, Kendra C; Berghaus, Roy D; Williams, Kurt J; Leutenegger, Christian M; Walby, William F; Schelegle, Edward S; Hyde, Dallas M; Gershwin, Laurel J

2004-10-01

Animal models are used to mimic human asthma, however, not all models replicate the major characteristics of the human disease. Spontaneous development of asthma with hallmark features similar to humans has been documented to occur with relative frequency in only one animal species, the cat. We hypothesized that we could develop an experimental model of feline asthma using clinically relevant aeroallergens identified from cases of naturally developing feline asthma, and characterize immunologic, physiologic, and pathologic changes over 1 year. House dust mite (HDMA) and Bermuda grass (BGA) allergen were selected by screening 10 privately owned pet cats with spontaneous asthma using a serum allergen-specific IgE ELISA. Parenteral sensitization and aerosol challenges were used to replicate the naturally developing disease in research cats. The asthmatic phenotype was characterized using intradermal skin testing, serum allergen-specific IgE ELISA, serum and bronchoalveolar lavage fluid (BALF) IgG and IgA ELISAs, airway hyperresponsiveness testing, BALF cytology, cytokine profiles using TaqMan PCR, and histopathologic evaluation. Sensitization with HDMA or BGA in cats led to allergen-specific IgE production, allergen-specific serum and BALF IgG and IgA production, airway hyperreactivity, airway eosinophilia, an acute T helper 2 cytokine profile in peripheral blood mononuclear cells and BALF cells, and histologic evidence of airway remodeling. Using clinically relevant aeroallergens to sensitize and challenge the cat provides an additional animal model to study the immunopathophysiologic mechanisms of allergic asthma. Chronic exposure to allergen in the cat leads to a variety of immunologic, physiologic, and pathologic changes that mimic the features seen in human asthma.

3D Dynamics of the Near-Surface Layer of the Ocean in the Presence of Freshwater Influx

Science.gov (United States)

Dean, C.; Soloviev, A.

2015-12-01

Freshwater inflow due to convective rains or river runoff produces lenses of freshened water in the near surface layer of the ocean. These lenses are localized in space and typically involve both salinity and temperature anomalies. Due to significant density anomalies, strong pressure gradients develop, which result in lateral spreading of freshwater lenses in a form resembling gravity currents. Gravity currents inherently involve three-dimensional dynamics. The gravity current head can include the Kelvin-Helmholtz billows with vertical density inversions. In this work, we have conducted a series of numerical experiments using computational fluid dynamics tools. These numerical simulations were designed to elucidate the relationship between vertical mixing and horizontal advection of salinity under various environmental conditions and potential impact on the pollution transport including oil spills. The near-surface data from the field experiments in the Gulf of Mexico during the SCOPE experiment were available for validation of numerical simulations. In particular, we observed a freshwater layer within a few-meter depth range and, in some cases, a density inversion at the edge of the freshwater lens, which is consistent with the results of numerical simulations. In conclusion, we discuss applicability of these results to the interpretation of Aquarius and SMOS sea surface salinity satellite measurements. The results of this study indicate that 3D dynamics of the near-surface layer of the ocean are essential in the presence of freshwater inflow.

Seasonal Variability of Salt Transports in the Northern Indian Ocean

Science.gov (United States)

D'Addezio, J. M.; Bulusu, S.

2016-02-01

Due to limited observational data in the Indian Ocean compared to other regions of the global ocean, past work on the Northern Indian Ocean (NIO) has relied heavily upon model analysis to study the variability of regional salinity advection caused by the monsoon seasons. With the launch of the Soil Moisture and Ocean Salinity (SMOS) satellite in 2009 and the Aquarius SAC-D mission in 2011 (ended on June 7, 2011), remotely sensed, synoptic scale sea surface salinity (SSS) data is now readily available to study this dynamic region. The new observational data has allowed us to revisit the region to analyze seasonal variability of salinity advection in the NIO using several modeled products, the Aquarius and SMOS satellites, and Argo floats data. The model simulations include the Consortium for Estimating the Circulation and Climate of the Ocean (ECCO2), European Centre for Medium-Range Weather Forecasts - Ocean Reanalysis System 4 (ECMWF-ORSA4), Simple Ocean Data Assimilation (SODA) Reanalysis, and HYbrid Coordinate Ocean Model (HYCOM). Our analyses of salinity at the surface and at depths up to 200 m, surface salt transport in the top 5 m layer, and depth-integrated salt transports revealed different salinity processes in the NIO that are dominantly related to the semi-annual monsoons. Aquarius and SMOS prove useful tools for observing this dynamic region, and reveal some aspects of SSS that Argo cannot resolve. Meridional depth-integrated salt transports using the modeled products along 6°N revealed dominant advective processes from the surface towards near-bottom depths. Finally, a difference in subsurface salinity stratification causes many of the modeled products to incorrectly estimate the magnitude and seasonality of NIO barrier layer thickness (BLT) when compared to the Argo solution. This problem is also evident in model output from the Seychelles-Chagos Thermocline Ridge (SCTR), a region with strong air-sea teleconnections with the Arabian Sea.

Summary of Meteorological Observations, Surface (SMOS) for Moffett Field, California

Science.gov (United States)

1988-12-01

w 4 4 ZAW 0-- 41 t ii tiI Is. hJ %AZ 0-O -, 1 *4 * ** * ** * flo - - 0 If . A ...f 2AWO 0 .4 N~an000f.4Ia -Jo.ss’s0 -i -w rar C4AI -1~n04 000 4, s...m 1 a 4 0, N Tun -I .- O il P 4A P- 46 ry o # * * . . . . . 0 . .* * 0 . . . . . . . 1 . . * .* .; * * - 1 mfn In vin0D0Dc0Wa. 0 .N Mdo) i r-0c..stoDC

Summary of Meteorological Observations, Surface (SMOS), Santa Ana, California/Tustin

Science.gov (United States)

1983-10-01

STATOR " All" SARK T1AM MONT. ALL -LATHE7 ir CLAS %l as (’.8+T. (KNIS) 1.3 4.4 7.10 11.16 17.21 22.27 23•331 34 -40 41.47 48 ,S >56 % WIND cmSL SPEED...me .I -o - -1L .I,. * 3- 0o 0o I07. 3mNM sl 2 -e -OS -o -. 0 S beC ?3+ 1.9+ * 11o2 6.r. VAN ’ iC1U M q ll 1., 1m, 1M 1EW M1,ol 03 3 3o 310, w mo8e1... 2006 79.5 26.4 lO 400C 1961 58.7 11,8 52 11.1 1963 4 ,9.0 2006 79.0 26.1 96 35.6 1981 59.1 15.1 51 10.6 194.7 5 6609 20.5 77.2 25.1 5Q 31,.7T 1961 60.06

SOIL moisture data intercomparison

Science.gov (United States)

Kerr, Yann; Rodriguez-Frenandez, Nemesio; Al-Yaari, Amen; Parens, Marie; Molero, Beatriz; Mahmoodi, Ali; Mialon, Arnaud; Richaume, Philippe; Bindlish, Rajat; Mecklenburg, Susanne; Wigneron, Jean-Pierre

2016-04-01

The Soil Moisture and Ocean Salinity satellite (SMOS) was launched in November 2009 and started delivering data in January 2010. Subsequently, the satellite has been in operation for over 6 years while the retrieval algorithms from Level 1 to Level 2 underwent significant evolutions as knowledge improved. Other approaches for retrieval at Level 2 over land were also investigated while Level 3 and 4 were initiated. In this présentation these improvements are assessed by inter-comparisons of the current Level 2 (V620) against the previous version (V551) and new products either using neural networks or Level 3. In addition a global evaluation of different SMOS soil moisture (SM) products is performed comparing products with those of model simulations and other satellites (AMSR E/ AMSR2 and ASCAT). Finally, all products were evaluated against in situ measurements of soil moisture (SM). The study demonstrated that the V620 shows a significant improvement (including those at level1 improving level2)) with respect to the earlier version V551. Results also show that neural network based approaches can yield excellent results over areas where other products are poor. Finally, global comparison indicates that SMOS behaves very well when compared to other sensors/approaches and gives consistent results over all surfaces from very dry (African Sahel, Arizona), to wet (tropical rain forests). RFI (Radio Frequency Interference) is still an issue even though detection has been greatly improved while RFI sources in several areas of the world are significantly reduced. When compared to other satellite products, the analysis shows that SMOS achieves its expected goals and is globally consistent over different eco climate regions from low to high latitudes and throughout the seasons.

Development of radio frequency interference detection algorithms for passive microwave remote sensing

Science.gov (United States)

Misra, Sidharth

Radio Frequency Interference (RFI) signals are man-made sources that are increasingly plaguing passive microwave remote sensing measurements. RFI is of insidious nature, with some signals low power enough to go undetected but large enough to impact science measurements and their results. With the launch of the European Space Agency (ESA) Soil Moisture and Ocean Salinity (SMOS) satellite in November 2009 and the upcoming launches of the new NASA sea-surface salinity measuring Aquarius mission in June 2011 and soil-moisture measuring Soil Moisture Active Passive (SMAP) mission around 2015, active steps are being taken to detect and mitigate RFI at L-band. An RFI detection algorithm was designed for the Aquarius mission. The algorithm performance was analyzed using kurtosis based RFI ground-truth. The algorithm has been developed with several adjustable location dependant parameters to control the detection statistics (false-alarm rate and probability of detection). The kurtosis statistical detection algorithm has been compared with the Aquarius pulse detection method. The comparative study determines the feasibility of the kurtosis detector for the SMAP radiometer, as a primary RFI detection algorithm in terms of detectability and data bandwidth. The kurtosis algorithm has superior detection capabilities for low duty-cycle radar like pulses, which are more prevalent according to analysis of field campaign data. Most RFI algorithms developed have generally been optimized for performance with individual pulsed-sinusoidal RFI sources. A new RFI detection model is developed that takes into account multiple RFI sources within an antenna footprint. The performance of the kurtosis detection algorithm under such central-limit conditions is evaluated. The SMOS mission has a unique hardware system, and conventional RFI detection techniques cannot be applied. Instead, an RFI detection algorithm for SMOS is developed and applied in the angular domain. This algorithm compares

Roles of Social Movement Organizations for Securing Workers' Safety in Korea: A Case Study of Abolition of the 30-Minute Delivery Guarantee Program in Pizza Delivery Service.

Science.gov (United States)

Park, Ji-Eun; Kim, Myoung-Hee

2016-07-01

Many restaurants in Korea maintain quick-delivery service programs to satisfy customers. This service allows delivery workers limited time to deliver, which frequently put them in danger. Most of the workers are young, work part-time, and are rarely organized into trade unions. In this article, through a case study of the social movement to abolish the 30-minute delivery guarantee program of pizza companies in Korea, we argue that social movements involving social movement organizations (SMOs) and individual citizens could serve as a means to rectify this problem. We show how the SMOs developed and expanded the movement using a framing perspective and how the general public became involved through social media. Data was collected via online searching. Interview scripts from key players of SMOs and unofficial documents they provided were also reviewed. Three SMOs primarily led the movement, successfully forming a frame that emphasized social responsibility. SMOs also utilized social media to link their standing frame with unmobilized citizens and to expand the movement. We identified contributing factors and limitations of the movement and drew lessons that could be applied to other sectors where workers are in vulnerable positions. © The Author(s) 2016.

Soil moisture characterization of the Valencia anchor station. Ground, aircraft measurements and simulations

DEFF Research Database (Denmark)

Lopez-Baeza, E; Antolin, M C; Balling, Jan E.

2009-01-01

In the framework of ESA SMOS Mission, the Valencia Anchor Station (VAS) has been selected as a core validation site. Its reasonable homogeneous characteristics make it appropriate to undertake the validation of SMOS Level 2 land products before attempting other more complex areas. Close to SMOS...... launch (2nd Nov. 2009), ESA defined the SMOS Validation Rehearsal Campaign Plan with the aim of testing the readiness, ensemble coordination and speed of operations, to be able to avoid as far as possible any unexpected deficiencies of the plan and procedure during the real Commissioning Phase campaigns......). Together with the ground SM measurements, other ground and meteorological measurements from the VAS area, kindly provided by other institutions, are currently been used to simulate passive microwave brightness temperature to obtain satellite "match ups" for validation purposes and to test the retrieval...

Nutrient-enhanced growth of Cladophora prolifera in harrington sound, bermuda: Eutrophication of a confined, phosphorus-limited marine ecosystem

Science.gov (United States)

Lapointe, Brian E.; O'Connell, Julie

1989-04-01

The green alga Cladophora prolifera (Chlorophyta, Cladophorales) has formed widespread blooms in Bermuda's inshore waters during the past 20 years, but, to date, no conclusive evidence links these blooms to nutrient enrichment. This study assessed the nutrient-dependance of productivity of Cladophora collected from Harrington Sound, a confined P-limited marine system where Cladophora first became abundant. Both N- and P-enrichment decreased the doubling time of Cladophora, which ranged from 14 days (with N and P enrichment) to 100 days (without enrichment). Nutrient enrichment also enhanced the light-saturated photosynthetic capacity (i.e. P max) of Cladophora, which ranged from 0·50 mg C g dry wt -1 h -1 (without enrichment) to 1·0 mg C g dry wt -1 h -1 (with enrichment). Tissue C:N, C:P and N:P ratios of unenriched Cladophora were elevated—25, 942, and 49, respectively—levels that suggest limitation by both N and P but primary limitation by P. Pore-waters under Cladophora mats had reduced salinities, elevated concentrations of NH 4, and high N:P ratios (N:P of 85), suggesting that N-rich groundwater seepage enriches Cladophora mats. The alkaline phosphatase capacity of Cladophora was high compared to other macroalgae in Harrington Sound, and its capacity was enhanced by N-enrichment and suppressed by P-enrichment. Because the productivity of Cladophora is nutrient-limited in shallow waters of Harrington Sound, enhanced growth and increased biomass of Cladophora result from cumulative seepage of N-rich groundwaters coupled with efficient utilization and recycling of dissolved organo-phosphorus compounds.

Real-time mapping of salt glands on the leaf surface of Cynodon dactylon L. using scanning electrochemical microscopy.

Science.gov (United States)

Parthasarathy, Meera; Pemaiah, Brindha; Natesan, Ravichandran; Padmavathy, Saralla R; Pachiappan, Jayaraman

2015-02-01

Salt glands are specialized organelles present in the leaf tissues of halophytes, which impart salt-tolerance capability to the plant species. These glands are usually identified only by their morphology using conventional staining procedures coupled with optical microscopy. In this work, we have employed scanning electrochemical microscopy to identify the salt glands not only by their morphology but also by their salt excretion behavior. Bermuda grass (Cynodon dactylon L.) species was chosen for the study as they are known to be salt-tolerant and contain salt glands on leaf surfaces. Scanning electrochemical microscopy performed in sodium chloride medium in the presence and absence of potassium ferrocyanide as redox mediator, reveals the identity of salt glands. More insight into the ion expulsion behavior of these glands was obtained by mapping lateral and vertical variations in ion concentrations using surface impedance measurements which indicated five times higher resistance over the salt glands compared to the surrounding tissues and bulk solution. The protocol could be used to understand the developmental processes in plants grown in different soil/water conditions in order to improve salt tolerance of food crops by genetic engineering and hence improve their agricultural productivity.

Multiangular L-band Datasets for Soil Moisture and Sea Surface Salinity Retrieval Measured by Airborne HUT-2D Synthetic Aperture Radiometer

Science.gov (United States)

Kainulainen, J.; Rautiainen, K.; Seppänen, J.; Hallikainen, M.

2009-04-01

SMOS is the European Space Agency's next Earth Explorer satellite due for launch in 2009. It aims for global monitoring of soil moisture and ocean salinity utilizing a new technology concept for remote sensing: two-dimensional aperture synthesis radiometry. The payload of SMOS is Microwave Imaging Radiometer by Aperture Synthesis, or MIRAS. It is a passive instrument that uses 72 individual L-band receivers for measuring the brightness temperature of the Earth. From each acquisition, i.e. integration time or snapshot, MIRAS provides two-dimensional brightness temperature of the scene in the instrument's field of view. Thus, consecutive snapshots provide multiangular measurements of the target once the instrument passes over it. Depending on the position of the target in instrument's swath, the brightness temperature of the target at incidence angles from zero up to 50 degrees can be measured with one overpass. To support the development MIRAS instrument, its calibration, and soil moisture and sea surface salinity retrieval algorithm development, Helsinki University of Technology (TKK) has designed, manufactured and tested a radiometer which operates at L-band and utilizes the same two-dimensional methodology of interferometery and aperture synthesis as MIRAS does. This airborne instrument, called HUT-2D, was designed to be used on board the University's research aircraft. It provides multiangular measurements of the target in its field of view, which spans up to 30 degrees off the boresight of the instrument, which is pointed to the nadir. The number of independent measurements of each target point depends on the flight speed and altitude. In addition to the Spanish Airborne MIRAS demonstrator (AMIRAS), HUT-2D is the only European airborne synthetic aperture radiometer. This paper presents the datasets and measurement campaigns, which have been carried out using the HUT-2D radiometer and are available for the scientific community. In April 2007 HUT-2D participated

DNA-based molecular fingerprinting of eukaryotic protists and cyanobacteria contributing to sinking particle flux at the Bermuda Atlantic time-series study

Science.gov (United States)

Amacher, Jessica; Neuer, Susanne; Lomas, Michael

2013-09-01

We used denaturing gradient gel electrophoresis (DGGE) to examine the protist and cyanobacterial communities in the euphotic zone (0-120 m) and in corresponding 150 m particle interceptor traps at the Bermuda Atlantic Time-series Study (BATS) in a two-year monthly time-series from May 2008 to April 2010. Dinoflagellates were the most commonly detected taxa in both water column and trap samples throughout the time series. Diatom sequences were found only eight times in the water column, and only four times in trap material. Small-sized eukaryotic taxa, including the prasinophyte genera Ostreococcus, Micromonas, and Bathycoccus, were present in trap samples, as were the cyanobacteria Prochlorococcus and Synechococcus. Synechococcus was usually overrepresented in trap material, whereas Prochlorococcus was underrepresented compared to the water column. Both seasonal and temporal variability affected patterns of ribosomal DNA found in sediment traps. The two years of this study were quite different hydrographically, with higher storm activity and the passing of a cyclonic eddy causing unusually deep mixing in winter 2010. This was reflected in the DGGE fingerprints of the water column, which showed greater phylotype richness of eukaryotes and a lesser richness of cyanobacteria in winter of 2010 compared with the winter of 2009. Increases in eukaryotic richness could be traced to increased diversity of prasinophytes and prymnesiophytes. The decrease in cyanobacterial richness was in turn reflected in the trap composition, but the increase in eukaryotes was not, indicating a disproportionate contribution of certain taxa to sinking particle flux.

An intercomparison of dissolved iron speciation at the Bermuda Atlantic Time-series Study (BATS site: Results from GEOTRACES Crossover Station A

Directory of Open Access Journals (Sweden)

Kristen Nicolle Buck

2016-12-01

Full Text Available The organic complexation of dissolved iron (Fe was determined in depth profile samples collected from GEOTRACES Crossover Station A, the Bermuda Atlantic Time-series Study (BATS site, as part of the Dutch and U.S. GEOTRACES North Atlantic programs in June 2010 and November 2011, respectively. The two groups employed distinct competitive ligand exchange-adsorptive cathodic stripping voltammetry (CLE-AdCSV methods, and resulting ligand concentrations and conditional stability constants from each profile were compared. Excellent agreement was found between the total ligand concentrations determined in June 2010 and the strongest, L1-type, ligand concentrations determined in November 2011. Yet a primary distinction between the datasets was the number of ligand classes observed: a single ligand class was characterized in the June 2010 profile while two ligand classes were observed in the November 2011 profile. To assess the role of differing interpretation approaches in determining final results, analysts exchanged titration data and accompanying parameters from the profiles for reinterpretation. The reinterpretation exercises highlighted the considerable influence of the sensitivity (S parameter applied on interpretation results, consistent with recent intercalibration work on interpretation of copper speciation titrations. The potential role of titration data structure, humic-type substances, differing dissolved Fe concentrations, and seasonality are also discussed as possible drivers of the one versus two ligand class determinations between the two profiles, leading to recommendations for future studies of Fe-binding ligand cycling in the oceans.

Assessment of seasonal and year-to-year surface salinity signals retrieved from SMOS and Aquarius missions in the Bay of Bengal

Digital Repository Service at National Institute of Oceanography (India)

Akhil, V.P.; Lengaigne, M.; Durand, F.; Vialard, J.; Chaitanya, A.V.S.; Keerthi, M.G.; Gopalakrishna, V.V.; Boutin, J.; de Boyer, M.C.

, Sorbonne Universités (UPMC, Univ Paris 06)-CNRS-IRD-MNHN, Paris, France; dNIO, Goa, India; eLOS, IFREMER, Plouzané, France ABSTRACT The Bay of Bengal (BoB) exhibits a wide range of sea surface salinity (SSS), with very fresh water induced by heavy monsoonal...

Estimating the potential impacts of large mesopredators on benthic resources: integrative assessment of spotted eagle ray foraging ecology in Bermuda.

Directory of Open Access Journals (Sweden)

Matthew J Ajemian

Full Text Available Declines of large sharks and subsequent release of elasmobranch mesopredators (smaller sharks and rays may pose problems for marine fisheries management as some mesopredators consume exploitable shellfish species. The spotted eagle ray (Aetobatus narinari is the most abundant inshore elasmobranch in subtropical Bermuda, but its predatory role remains unexamined despite suspected abundance increases and its hypothesized specialization for mollusks. We utilized a combination of acoustic telemetry, benthic invertebrate sampling, gut content analysis and manipulative experiments to assess the impact of spotted eagle rays on Bermudian shellfish resources. Residency and distribution of adult spotted eagle rays was monitored over two consecutive summers in Harrington Sound (HS, an enclosed inshore lagoon that has historically supported multiple recreational and commercial shellfish species. Telemetered rays exhibited variable fidelity (depending on sex to HS, though generally selected regions that supported relatively high densities of potential mollusk prey. Gut content analysis from rays collected in HS revealed a diet of mainly bivalves and a few gastropods, with calico clam (Macrocallista maculata representing the most important prey item. Manipulative field and mesocosm experiments with calico clams suggested that rays selected prey patches based on density, though there was no evidence of rays depleting clam patches to extirpation. Overall, spotted eagle rays had modest impacts on local shellfish populations at current population levels, suggesting a reduced role in transmitting cascading effects from apex predator loss. However, due to the strong degree of coupling between rays and multiple protected mollusks in HS, ecosystem-based management that accounts for ray predation should be adopted.

CAROLS: A New Airborne L-Band Radiometer for Ocean Surface and Land Observations

Directory of Open Access Journals (Sweden)

Ernesto Lopez-Baeza

2011-01-01

Full Text Available The “Cooperative Airborne Radiometer for Ocean and Land Studies” (CAROLS L-Band radiometer was designed and built as a copy of the EMIRAD II radiometer constructed by the Technical University of Denmark team. It is a fully polarimetric and direct sampling correlation radiometer. It is installed on board a dedicated French ATR42 research aircraft, in conjunction with other airborne instruments (C-Band scatterometer—STORM, the GOLD-RTR GPS system, the infrared CIMEL radiometer and a visible wavelength camera. Following initial laboratory qualifications, three airborne campaigns involving 21 flights were carried out over South West France, the Valencia site and the Bay of Biscay (Atlantic Ocean in 2007, 2008 and 2009, in coordination with in situ field campaigns. In order to validate the CAROLS data, various aircraft flight patterns and maneuvers were implemented, including straight horizontal flights, circular flights, wing and nose wags over the ocean. Analysis of the first two campaigns in 2007 and 2008 leads us to improve the CAROLS radiometer regarding isolation between channels and filter bandwidth. After implementation of these improvements, results show that the instrument is conforming to specification and is a useful tool for Soil Moisture and Ocean Salinity (SMOS satellite validation as well as for specific studies on surface soil moisture or ocean salinity.

Inhibiton of Yellow Nutsedge (Cyperus esculentus L. and Bermudagrass (Cynodon dactylon (L. Pers by a Mulch Derived from Rye (Secale cereale L. in grapevines Inhibición del Crecimiento de Chufa (Cyperus esculentus L. y Pasto Bermuda (Cynodon dactylon (L. Pers. con mulch Vegetal Proveniente de Centeno (Secale cereale L. en Vides

Directory of Open Access Journals (Sweden)

Juan Ormeño-Núñez

2008-09-01

Full Text Available Two field trials (Los Andes 1998-1999 and Santiago 2004-2005 were carried out to determine growth inhibition of yellow nutsedge (Cyperus esculentus L. and bermudagrass (Cynodon dactylon (L. Pers., growing on the plantation row, by mulch derived from a rye (Secale cereale L. cover crop established between grapevine (Vitis vinifera L. rows on overhead (cv. Flame Seedless and vertical (cv. Cabernet Sauvignon training. Spring mowing of the rye sown in the fall allowed for developing a thick and long lasting mulch along the grape rows. Nutsedge and bermudagrass control was 81 and 82%, respectively, and was more effective than conventional chemical (in the row + mechanical (between rows control. Glyphosate at 2% for nutsedge and 1% for bermudagrass control, applied twice (October and December, was insufficient to control either perennial weed adequately. Total broadleaved and grass/sedge weed control was 67.3 and 43.0% more effective with the rye mulch than with conventional treatments at Los Andes and Santiago, respectively. Perennial weed control levels could be explained as the new foliage of yellow nutsedge and bermudagrass was particularly susceptible to the shading provided by the rye mulch assembled prior to mid spring shoot emergence, and this effect remained active up until the beginning of autumn. The subsequent rye foliage mowing at the vegetative stage fully expressed the allelopathic effect produced by this local rye cultivar. The use of rye cover crop management and mulch could be applied as an effective weed control technique in conventional, as well as organic deciduous tree orchards.En dos ensayos de campo (Los Andes 1998-1999 y Santiago 2004-2005 se determinó el efecto inhibitorio sobre chufa (Cyperus esculentus L. y pasto bermuda (Cynodon dactylon (L. Pers. de residuos de centeno (Secale cereale L. establecido en otoño entre las hileras de vides (Vitis vinifera L. en parronal (cv. Flame Seedless y espaldera (cv. Cabernet Sauvignon

Monoclonal antibody-based ELISA to quantify the major allergen of Cynodon dactylon (Bermuda grass) pollen, Cyn d 1.

Science.gov (United States)

Duffort, O; Calabozo, B; González, R; Carpizo, J A; Barber, D; Polo, F

2004-12-01

Pollen of Bermuda grass (Cynodon dactylon) is an important cause of pollinosis in many areas of the world. Most patients show sensitivity to the major allergen Cyn d 1, a glycoprotein composed of a number of isoforms with a molecular mass of 31-32 kDa. The aim of this work was to develop a monoclonal antibody (mAb)-based ELISA to quantify Cyn d 1, and to assess the correlation of the allergen content with the biological activity of C. dactylon pollen extracts. After fusion of myeloma cells with spleen cells from a BALB/c mouse immunized with C. dactylon pollen extract, Cyn d 1-specific mAbs secreting hybridomas were selected, and the antibodies characterized. One of them (4.4.1) was used as the capture antibody in an ELISA method for Cyn d 1 quantitation. An anti-Cyn d 1 rabbit serum was used as the second antibody. Cyn d 1 was purified by immunoaffinity chromatography with mAb 4.4.1, characterized, and used as the standard in the assay. The identity, purity and isoallergen composition of affinity-purified Cyn d 1 was confirmed by N-terminal amino acid sequencing, SDS-PAGE, Western blot and 2D electrophoresis. The Cyn d 1 ELISA is highly specific and sensitive, with a detection limit of 0.24 ng/ml and a linear range of 1.1-9.2 ng/ml. An excellent correlation was found when the content of Cyn d 1, measured in 16 different extracts, was compared with the allergenic activity of the same extracts determined by RAST inhibition. The results prove the usefulness of the Cyn d 1 ELISA for the standardization of C. dactylon-allergen products on the basis of major allergen content. 2004 S. Karger AG, Basel.

Improving streamflow simulations and forecasting performance of SWAT model by assimilating remotely sensed soil moisture observations

Science.gov (United States)

Patil, Amol; Ramsankaran, RAAJ

2017-12-01

This article presents a study carried out using EnKF based assimilation of coarser-scale SMOS soil moisture retrievals to improve the streamflow simulations and forecasting performance of SWAT model in a large catchment. This study has been carried out in Munneru river catchment, India, which is about 10,156 km2. In this study, an EnkF based new approach is proposed for improving the inherent vertical coupling of soil layers of SWAT hydrological model during soil moisture data assimilation. Evaluation of the vertical error correlation obtained between surface and subsurface layers indicates that the vertical coupling can be improved significantly using ensemble of soil storages compared to the traditional static soil storages based EnKF approach. However, the improvements in the simulated streamflow are moderate, which is due to the limitations in SWAT model in reflecting the profile soil moisture updates in surface runoff computations. Further, it is observed that the durability of streamflow improvements is longer when the assimilation system effectively updates the subsurface flow component. Overall, the results of the present study indicate that the passive microwave-based coarser-scale soil moisture products like SMOS hold significant potential to improve the streamflow estimates when assimilating into large-scale distributed hydrological models operating at a daily time step.

Oceanographic profile temperature, oxygen, nitrate+nitrite and other measurements collected using bottle from various platforms in the North Atlantic ocean from 1988 to 2001 (NODC Accession 0000990)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Profile data collected as part of the Bermuda-Atlantic Time Series Study (BATS) from Bermuda Institute of Ocean Sciences (BIOS; formerly BBSR)

Crop yield monitoring in the Sahel using root zone soil moisture anomalies derived from SMOS soil moisture data assimilation

Science.gov (United States)

Gibon, François; Pellarin, Thierry; Alhassane, Agali; Traoré, Seydou; Baron, Christian

2017-04-01

West Africa is greatly vulnerable, especially in terms of food sustainability. Mainly based on rainfed agriculture, the high variability of the rainy season strongly impacts the crop production driven by the soil water availability in the soil. To monitor this water availability, classical methods are based on daily precipitation measurements. However, the raingauge network suffers from the poor network density in Africa (1/10000km2). Alternatively, real-time satellite-derived precipitations can be used, but they are known to suffer from large uncertainties which produce significant error on crop yield estimations. The present study proposes to use root soil moisture rather than precipitation to evaluate crop yield variations. First, a local analysis of the spatiotemporal impact of water deficit on millet crop production in Niger was done, from in-situ soil moisture measurements (AMMA-CATCH/OZCAR (French Critical Zone exploration network)) and in-situ millet yield survey. Crop yield measurements were obtained for 10 villages located in the Niamey region from 2005 to 2012. The mean production (over 8 years) is 690 kg/ha, and ranges from 381 to 872 kg/ha during this period. Various statistical relationships based on soil moisture estimates were tested, and the most promising one (R>0.9) linked the 30-cm soil moisture anomalies from mid-August to mid-September (grain filling period) to the crop yield anomalies. Based on this local study, it was proposed to derive regional statistical relationships using 30-cm soil moisture maps over West Africa. The selected approach was to use a simple hydrological model, the Antecedent Precipitation Index (API), forced by real-time satellite-based precipitation (CMORPH, PERSIANN, TRMM3B42). To reduce uncertainties related to the quality of real-time rainfall satellite products, SMOS soil moisture measurements were assimilated into the API model through a Particular Filter algorithm. Then, obtained soil moisture anomalies were

Oceanographic temperature, salinity, nitrate, phosphate, silicate, primary productivity, pigments, pCO2 and other measurements collected using bottle and CTD from multiple platforms in the North Atlantic during 1988 to 2006 (NODC Accession 0032053)

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Chemical, biological, and physical profile data collected as part of the Bermuda-Atlantic Time Series Study (BATS) for the period 1988-December 2006 at Bermuda...

Ocean Surface Emissivity at L-band (1.4 GHz): The Dependence on Salinity and Roughness

Science.gov (United States)

LeVine, D. M.; Lang, R.; Wentz, F.; Messiner, T.

2012-01-01

A characterization of the emissivity of sea water at L-band is important for the remote sensing of sea surface salinity. Measurements of salinity are currently being made in the radio astronomy band at 1.413 GHz by ESA's Soil Moisture and Ocean Salinity (SMOS) mission and NASA's Aquarius instrument aboard the Aquarius/SAC-D observatory. The goal of both missions is accuracy on the order of 0.1 psu. This requires accurate knowledge of the dielectric constant of sea water as a function of salinity and temperature and also the effect of waves (roughness). The former determines the emissivity of an ideal (i.e. flat) surface and the later is the major source of error from predictions based on a flat surface. These two aspects of the problem of characterizing the emissivity are being addressed in the context of the Aquarius mission. First, laboratory measurements are being made of the dielectric constant of sea water. This is being done at the George Washington University using a resonant cavity. In this technique, sea water of known salinity and temperature is fed into the cavity along its axis through a narrow tube. The sea water changes the resonant frequency and Q of the cavity which, if the sample is small enough, can be related to the dielectric constant of the sample. An extensive set of measurements have been conducted at 1.413 GHz to develop a model for the real and imaginary part of the dielectric constant as a function of salinity and temperature. The results are compared to the predictions of models based on parameterization of the Debye resonance of the water molecule. The models and measurements are close; however, the differences are significant for remote sensing of salinity. This is especially true at low temperatures where the sensitivity to salinity is lowest.

Monthly Sea Surface Salinity and Freshwater Flux Monitoring

Science.gov (United States)

Ren, L.; Xie, P.; Wu, S.

2017-12-01

Taking advantages of the complementary nature of the Sea Surface Salinity (SSS) measurements from the in-situ (CTDs, shipboard, Argo floats, etc.) and satellite retrievals from Soil Moisture Ocean Salinity (SMOS) satellite of the European Space Agency (ESA), the Aquarius of a joint venture between US and Argentina, and the Soil Moisture Active Passive (SMAP) of national Aeronautics and Space Administration (NASA), a technique is developed at NOAA/NCEP/CPC to construct an analysis of monthly SSS, called the NOAA Blended Analysis of Sea-Surface Salinity (BASS). The algorithm is a two-steps approach, i.e. to remove the bias in the satellite data through Probability Density Function (PDF) matching against co-located in situ measurements; and then to combine the bias-corrected satellite data with the in situ measurements through the Optimal Interpolation (OI) method. The BASS SSS product is on a 1° by 1° grid over the global ocean for a 7-year period from 2010. Combined with the NOAA/NCEP/CPC CMORPH satellite precipitation (P) estimates and the Climate Forecast System Reanalysis (CFSR) evaporation (E) fields, a suite of monthly package of the SSS and oceanic freshwater flux (E and P) was developed to monitor the global oceanic water cycle and SSS on a monthly basis. The SSS in BASS product is a suite of long-term SSS and fresh water flux data sets with temporal homogeneity and inter-component consistency better suited for the examination of the long-term changes and monitoring. It presents complete spatial coverage and improved resolution and accuracy, which facilitates the diagnostic analysis of the relationship and co-variability among SSS, freshwater flux, mixed layer processes, oceanic circulation, and assimilation of SSS into global models. At the AGU meeting, we will provide more details on the CPC salinity and fresh water flux data package and its applications in the monitoring and analysis of SSS variations in association with the ENSO and other major climate

An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions

Science.gov (United States)

Kim, Edward

2012-01-01

Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201l. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record -- provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica--parameters such as surface temperature.

An Evaluation of Antarctica as a Calibration Target for Passive Microwave Satellite Missions with Climate Data Record Applications

Science.gov (United States)

Kim, Edward

2011-01-01

Passive microwave remote sensing at L-band (1.4 GHz) is sensitive to soil moisture and sea surface salinity, both important climate variables. Science studies involving these variables can now take advantage of new satellite L-band observations. The first mission with regular global passive microwave observations at L-band is the European Space Agency's Soil Moisture and Ocean Salinity (SMOS), launched November, 2009. A second mission, NASA's Aquarius, was launched June, 201 I. A third mission, NASA's Soil Moisture Active Passive (SMAP) is scheduled to launch in 2014. Together, these three missions may provide a decade-long data record-provided that they are intercalibrated. The intercalibration is best performed at the radiance (brightness temperature) level, and Antarctica is proving to be a key calibration target. However, Antarctica has thus far not been fully characterized as a potential target. This paper will present evaluations of Antarctica as a microwave calibration target for the above satellite missions. Preliminary analyses have identified likely target areas, such as the vicinity of Dome-C and larger areas within East Antarctica. Physical sources of temporal and spatial variability of polar firn are key to assessing calibration uncertainty. These sources include spatial variability of accumulation rate, compaction, surface characteristics (dunes, micro-topography), wind patterns, and vertical profiles of density and temperature. Using primarily SMOS data, variability is being empirically characterized and attempts are being made to attribute observed variability to physical sources. One expected outcome of these studies is the potential discovery of techniques for remotely sensing--over all of Antarctica-parameters such as surface temperature.

A Coupled Epipelagic-Meso/Bathypelagic Particle Flux Model for the Bermuda Atlantic Time-series Station (BATS)/Oceanic Flux Program (OFP) Site

Science.gov (United States)

Glover, D. M.; Conte, M.

2002-12-01

Of considerable scientific interest is the role remineralization plays in the global carbon cycle. It is the ``biological pump'' that fixes carbon in the upper water column and exports it for long time periods to the deep ocean. From a global carbon cycle point-of-view, it is the processes that govern remineralization in the mid- to deep-ocean waters that provide the feedback to the biogeochemical carbon cycle. In this study we construct an ecosystem model that serves as a mechanistic link between euphotic processes and mesopelagic and bathypelagic processes. We then use this prognostic model to further our understanding of the unparalleled time-series of deep-water sediment traps (21+ years) at the Oceanic Flux Program (OFP) and the euphotic zone measurements (10+ years) at the Bermuda Atlantic Time-series Site (BATS). At the core of this mechanistic ecosystem model of the mesopelagic zone is a model that consists of an active feeding habit zooplankton, a passive feeding habit zooplankton, large detritus (sinks), small detritus (non-sinking), and a nutrient pool. As the detritus, the primary source of food, moves through the water column it is fed upon by the active/passive zooplankton pair and undergoes bacterially mediated remineralization into nutrients. The large detritus pool at depth gains material from the formation of fecal pellets from the passive and active zooplankton. Sloppy feeding habits of the active zooplankton contribute to the small detrital pool. Zooplankton mortality (both classes) also contribute directly to the large detritus pool. Aggregation and disaggregation transform detrital particles from one pool to the other and back again. The nutrients at each depth will gain from detrital remineralization and zooplankton excretion. The equations that model the active zooplankton, passive zooplankton, large detritus, small detritus, and nutrients will be reviewed, results shown and future model modifications discussed.

Cryosphere campaigns in support of ESA's Earth Explorers Missions

Science.gov (United States)

Casal, Tânia; Davidson, Malcolm; Plank, Gernot; Floberghagen, Rune; Parrinello, Tommaso; Mecklenburg, Susanne; Drusch, Matthias; Fernandez, Diego

2014-05-01

demonstrated for the first time the potential to retrieve sea ice thickness from SMOS data. However, the product retrieval algorithm had never been validated using independent airborne measurements in the Arctic region. Therefore, the SMOSice airborne campaign will take place over sea-ice south east of Svalbard during the last week of March 2014. CryoVEx 2014 is a large collaborative effort to help ensure the accuracy of ESA's ice mission CryoSat-2. ESA has supported extensive CryoSat-2 pre-launch validation campaigns by providing simultaneous overflights of surface experiments performed by CryoSat Validation Retrieval Team (CVRT) members in Greenland, Canada, Svalbard and the Arctic Ocean in 2003, 2005, 2006, 2007 and 2008. Since CryoSat-2's launch, the field campaigns have been significantly augmented including a close collaboration with NASA's Operation Icebridge since 2011 and continued in 2014. Collectively, these activities are known as CryoVEx (CryoSat-2 Validation Experiment). The aim of this large-scale CryoVEx2014 ground and airborne campaign is to record sea-ice thickness and conditions of the ice along the CryoSat-2 ground track. A range of sensors installed in different aircraft included simple cameras to get a visual record of the sea ice, laser scanners to clearly map the height of the ice, an ice-thickness sensor (EM-Bird), ESA's radar altimeter (ASIRAS) and NASA's snow and Ku-band radars, which mimic CryoSat's measurements but at a higher resolution. Results from previous campaigns have shown the ability to detect centimetre differences between sea-ice and thin ice/water which in turn allowed for an accurate estimation of actual sea ice thickness. For the different activities a rich variety of datasets has been recorded, are archived and users can access campaign data through the EOPI web portal [http://eopi.esa.int].

Uncertainty Assessment of Space-Borne Passive Soil Moisture Retrievals

Science.gov (United States)

Quets, Jan; De Lannoy, Gabrielle; Reichle, Rolf; Cosh, Michael; van der Schalie, Robin; Wigneron, Jean-Pierre

2017-01-01

The uncertainty associated with passive soil moisture retrieval is hard to quantify, and known to be underlain by various, diverse, and complex causes. Factors affecting space-borne retrieved soil moisture estimation include: (i) the optimization or inversion method applied to the radiative transfer model (RTM), such as e.g. the Single Channel Algorithm (SCA), or the Land Parameter Retrieval Model (LPRM), (ii) the selection of the observed brightness temperatures (Tbs), e.g. polarization and incidence angle, (iii) the definition of the cost function and the impact of prior information in it, and (iv) the RTM parameterization (e.g. parameterizations officially used by the SMOS L2 and SMAP L2 retrieval products, ECMWF-based SMOS assimilation product, SMAP L4 assimilation product, and perturbations from those configurations). This study aims at disentangling the relative importance of the above-mentioned sources of uncertainty, by carrying out soil moisture retrieval experiments, using SMOS Tb observations in different settings, of which some are mentioned above. The ensemble uncertainties are evaluated at 11 reference CalVal sites, over a time period of more than 5 years. These experimental retrievals were inter-compared, and further confronted with in situ soil moisture measurements and operational SMOS L2 retrievals, using commonly used skill metrics to quantify the temporal uncertainty in the retrievals.

Attractiveness of botanical infusions to ovipositing Culex quinquefasciatus, Cx. nigripalpus, and Cx. erraticus in San Antonio, Texas.

Science.gov (United States)

McPhatter, Lee P; Debboun, Mustapha

2009-12-01

Field experiments were conducted on the Fort Sam Houston Military Reservation, San Antonio, TX, in fall 2008 to observe the attractiveness of selected botanical infusions to ovipositing female mosquitoes. The following infusions were tested in Centers for Disease Control and Prevention gravid traps: Bermuda grass (Cynodon dactylon), oak leaf (Quercus virginiana), acacia leaf (Acacia schaffneri), rabbit chow (alfalfa pellets), and algae (Spirogyra sp.). Four (Bermuda, acacia, oak, and algae) of the 5 infusions were effective in collecting Culex quinquefasciatus, Cx. nigripalpus, and Cx. erraticus. Of the 4 infusions, Bermuda collected the greatest number of the mosquitoes sampled. Female Aedes albopictus mosquitoes were collected in moderate numbers during this study.

Using high-resolution soil moisture modelling to assess the uncertainty of microwave remotely sensed soil moisture products at the correct spatial and temporal support

Science.gov (United States)

Wanders, N.; Karssenberg, D.; Bierkens, M. F. P.; Van Dam, J. C.; De Jong, S. M.

2012-04-01

product by averaging model results from the 1 km2 grid within the remote sensing footprint. Overall 440 (AMSR-E, SMOS) to 680 (ASCAT) timeseries were compared to the aggregated SWAP model results, providing valuable information on the uncertainty of satellite soil moisture at the proper support. Our results show that temporal dynamics are best captured by ASCAT resulting in an average correlation of 0.72 with the model, while ASMR-E (0.41) and SMOS (0.42) are less capable of representing these dynamics. Standard deviations found for ASCAT and SMOS are low, 0.049 and 0.051m3m-3 respectively, while AMSR-E has a higher value of 0.062m3m-3. All standard deviations are higher than the average model uncertainty of 0.017m3m-3. All satellite products show a negative bias compared to the model results, with the largest value for SMOS. Satellite uncertainty is not found to be significantly related to topography, but is found to increase in densely vegetated areas. In general AMSR-E has most difficulties capturing soil moisture dynamics in Spain, while SMOS and mainly ASCAT have a fair to good performance. However, all products contain valuable information about the near-surface soil moisture over Spain. Van Dam, J.C., 2000, Field scale water flow and solute transport. SWAP model concepts, parameter estimation and case studies. Ph.D. thesis, Wageningen University

The Effect of Three Different Data Fusion Approaches on the Quality of Soil Moisture Retrievals from Multiple Passive Microwave Sensors

Directory of Open Access Journals (Sweden)

Robin van der Schalie

2018-01-01

Full Text Available Long-term climate records of soil moisture are of increased importance to climate researchers. In this study, we aim to evaluate the quality of three different fusion approaches that combine soil moisture retrieval from multiple satellite sensors. The arrival of L-band missions has led to an increased focus on the integration of L-band-based soil moisture retrievals in climate records, emphasizing the need to improve our understanding based on its added value within a multi-sensor framework. The three evaluated approaches were developed on 10-year passive microwave data (2003–2013 from two different satellite sensors, i.e., SMOS (2010–2013 and AMSR-E (2003–2011, and are based on a neural network (NN, regressions (REG, and the Land Parameter Retrieval Model (LPRM. The ability of the different approaches to best match AMSR-E and SMOS in their overlapping period was tested using an inter-comparison exercise between the SMOS and AMSR-E datasets, while the skill of the individual soil moisture products, based on anomalies, was evaluated using two verification techniques; first, a data assimilation technique that links precipitation information to the quality of soil moisture (expressed as the Rvalue, and secondly the triple collocation analysis (TCA. ASCAT soil moisture was included in the skill evaluation, representing the active microwave-based counterpart of soil moisture retrievals. Besides a semi-global analysis, explicit focus was placed on two regions that have strong land–atmosphere coupling, the Sahel (SA and the central Great Plains (CGP of North America. The NN approach gives the highest correlation coefficient between SMOS and AMSR-E, closely followed by LPRM and REG, while the absolute error is approximately the same for all three approaches. The Rvalue and TCA show the strength of using different satellite sources and the impact of different merging approaches on the skill to correctly capture soil moisture anomalies. The

Selection of soil hydraulic properties in a land surface model using remotely-sensed soil moisture and surface temperature

Science.gov (United States)

Shellito, P. J.; Small, E. E.; Gutmann, E. D.

2013-12-01

Synoptic-scale weather is heavily influenced by latent and sensible heating from the land surface. The partitioning of available energy between these two fluxes as well as the distribution of moisture throughout the soil column is controlled by a unique set of soil hydraulic properties (SHPs) at every location. Weather prediction systems, which use coupled land surface and atmospheric models in their forecasts, must therefore be parameterized with estimates of SHPs. Currently, land surface models (LSMs) obtain SHP values by assuming a correlation exists between SHPs and the soil type, which the USDA maps in 12 classes. This method is spurious because texture is only one control of many that affects SHPs. Alternatively, SHPs can be obtained by calibrating them within the framework of an LSM. Because remotely-sensed data have the potential for continent-wide application, there is a critical need to understand their specific role in calibration efforts and the extent to which such calibrated SHPs can improve model simulations. This study focuses on SHP calibration with soil moisture content (SMC) and land surface temperature (Ts), data that are available from the SMOS and MODIS satellite missions, respectively. The scientific goals of this study are: (1) What is the model performance tradeoff between weighting SMC and Ts differently during the calibration process? (2) What can the tradeoff between calibration using in-situ and remotely-sensed SMC reveal about SHP scaling? (3) How are these relationships influenced by climatic regime and vegetation type? (4) To what extent can calibrated SHPs improve model performance over that of texture-based SHPs? Model calibrations are carried out within the framework of the Noah LSM using the Shuffled Complex Evolution Metropolis (SCEM-UA) algorithm in five different climatic regimes. At each site, a five-dimensional parameter space of SHPs is searched to find the location that minimizes the difference between observed and

L-band radiometry for sea ice applications

Science.gov (United States)

Heygster, G.; Hedricks, S.; Mills, P.; Kaleschke, L.; Stammer, D.; Tonboe, R.

2009-04-01

Although sea ice remote sensing has reached the level of operational exploitation with well established retrieval methods, several important tasks are still unsolved. In particular during freezing and melting periods with mixed ice and water surfaces, estimates of ice concentration with passive and active microwave sensors remain challenging. Newly formed thin ice is also hard to distinguish from open water with radiometers for frequencies above 8 GHz. The SMOS configuration (planned launch 2009) with a radiometer at 1.4 GHz is a promising technique to complement observations at higher microwave frequencies. ESA has initiated a project to investigate the possibilities for an additional Level-2 sea ice data product based on SMOS. In detail, the project objectives are (1) to model the L band emission of sea ice, and to assess the potential (2) to retrieve sea ice parameters, especially concentration and thickness, and (3) to use cold water regions for an external calibration of SMOS. Modelling of L band emission: Several models have are investigated. All of them work on the same basic principles and have a vertically-layered, plane-parallel geometry. They are comprised of three basic components: (1) effective permittivities are calculated for each layer based on ice bulk and micro-structural properties; (2) these are integrated across the total depth to derive emitted brightness temperature; (3) scattering terms can also be added because of the granular structure of ice and snow. MEMLS (Microwave Emission Model of Layered Snowpacks (Wiesmann and Matzler 1999)) is one such model that contains all three elements in a single Matlab program. In the absence of knowledge about the internal structure of the sea ice, three-layer (air, ice and water) dielectric slab models which take as input a single effective permittivity for the ice layer are appropriate. By ignoring scattering effects one can derive a simple analytic expression for a dielectric slab as shown by Apinis and

The Role of Atmospheric Deposition on the Input of Trace Elements to the Surface Ocean: the Bermuda Wet and Dry Record

Science.gov (United States)

Church, T. M.; Sedwick, P. N.; Sholkovitz, E. R.

2011-12-01

Global surface temperature variations and changes result from intricate interplay of phenomena varying on scales ranging from fraction of seconds (turbulence) to thousands of years (e.g. glaciations). To complicate these issues further, the contribution of the anthropogenic forcing on the observed changes in surface temperatures varies over time and is spatially non-uniform. While evaluating all individual bands of this broad spectrum is virtually impossible, the availability of global daily datasets in the last few decades from reanalyses and Global Climate Models (GCMs) simulations allows estimating the contribution of phenomena varying on synoptic-to-interannual timescales. Previous studies using GCM simulations for the Intergovernmental Panel on Climate Change (IPCC) Fourth Assessment (IPCC AR4) have documented a consistent poleward shift in the storm tracks related to changes in baroclinicity resulting from global warming. However, our recent research (Cannon et al. 2013) indicated that the pattern of changes in the storm tracks observed in the last few decades is much more complex in both space and time. Complex terrain and the relative distribution of continents, oceans and icecaps play a significant role for changes in synoptic activity. Coupled modes such as the Northern and Southern annular modes, the El Nino-Southern Oscillation (ENSO) and respective teleconnections with changes in baroclinicity have been identified as relevant dynamical forcings for variations of the midlatitude storm tracks, increasing the uncertainties in future projections. Moreover, global warming has modified the amplitude of the annual cycles of temperature, moisture and circulation throughout the planet and there is strong indication that these changes have mostly affected the tropics and Polar Regions. The present study advances these findings by investigating the 'blue-shift' in the underlying dynamics causing surface temperature anomalies and investigates relationships with

Validation of soil moisture ocean salinity (SMOS) satellite soil moisture products

Science.gov (United States)

The surface soil moisture state controls the partitioning of precipitation into infiltration and runoff. High-resolution observations of soil moisture will lead to improved flood forecasts, especially for intermediate to large watersheds where most flood damage occurs. Soil moisture is also key in d...

Second medical opinions: the views of oncology patients and their physicians.

Science.gov (United States)

Philip, Jennifer; Gold, Michelle; Schwarz, Max; Komesaroff, Paul

2010-09-01

Second medical opinions (SMOs) are common in oncology practice, but the nature of these consultations has received relatively little attention. This study examines the views of patients with advanced cancer and their physicians of SMOs. Parallel, concurrent surveys were developed for patients and physicians. The first was distributed to outpatients with advanced cancer-attending specialist clinics in an Australian quaternary hospital. The second survey, developed on the basis of results of exploratory interviews with medical oncologists, was distributed to medical oncologists in Australia. Seventeen of fifty two (33%) patients had sought a SMO, most commonly prompted by concerns around communication with their first doctor, the extreme and desperate nature of their medical condition and the need for reassurance. Most (94%) patients found the SMO helpful, with satisfaction related to improved communication and reassurance. Patients were concerned that seeking a second medical opinion may affect their relationship with their primary doctor. Most physicians (82%) reported seeing between one and five SMO per month, with patients being motivated by the need for additional information and reassurance. Physicians regarded SMO patients as having greater information needs (84%), greater psychosocial needs (58%) and requiring more of the physician's time and energy (77%) than other patients. SMOs are common in cancer care with most patients motivated by the need for improved communication, additional information and reassurance. Physicians identify patients who seek SMOs as having additional psychosocial needs compared with other oncology patients.

Sulfur and trace metal relationships in nonurban and marine aerosols studied using proton induced X-ray emission

International Nuclear Information System (INIS)

Winchester, J.W.

1977-01-01

As an example of the application of the PIXE analysis technique to the study of sulfur and related trace metals in aerosol samples from nonurban locations, results obtained from a remote continental station in the Southern Hemisphere, Chacaltaya Mountain near La Paz, Bolivia, and a mid-ocean station in the Atlantic of the Northern Hemisphere, at Bermuda, are compared. In Bolivian filter samples, the proportions of Si, K, Ca, Ti, Fe, Rb, and Sr are within the ranges expected from the subaerial erosion of major rock types of the earth's crust. However, the proportions, relative to Fe, of S, Cu, Zn, As, and Pb are enriched 10-100 times in comparison with the compositions of major rock types. In Bermuda cascade impactor samples summed over all particle sizes, the ratio S/Zn and the relative proportions of K, Ca, and Fe resemble those observed in Bolivia. Total Fe concentrations in Bermuda average about 60 ng/m 3 , similar to concentrations observed in Bolivia. However, the ratios S/Fe and Zn/Fe are 10 times greater in Bermuda than in Bolivia, and these ratios are greatest for smallest particles and decrease sharply with increasing particle size. The higher S and Zn concentrations in Bermuda may result from the combined effect of natural processes which control the atmospheric enrichment of chalcophile elements of long range transport from pollution sources in urban and industrial centers. (Auth.)

Microwave Interferometric Radiometry in Remote Sensing: an Invited Historical Review

Science.gov (United States)

Martin-Neira, M.; LeVine, D. M.; Kerr, Y.; Skou, N.; Peichl, M.; Camps, A.; Corbella, I.; Hallikainen, M.; Font, J.; Wu, J.;

Satellite observed salinity distributions at high latitudes in the Northern Hemisphere: A comparison of four products

Science.gov (United States)

Garcia-Eidell, Cynthia; Comiso, Josefino C.; Dinnat, Emmanuel; Brucker, Ludovic

2017-09-01

Global surface ocean salinity measurements have been available since the launch of SMOS in 2009 and coverage was further enhanced with the launch of Aquarius in 2011. In the polar regions where spatial and temporal changes in sea surface salinity (SSS) are deemed important, the data have not been as robustly validated because of the paucity of in situ measurements. This study presents a comparison of four SSS products in the ice-free Arctic region, three using Aquarius data and one using SMOS data. The accuracy of each product is assessed through comparative analysis with ship and other in situ measurements. Results indicate RMS errors ranging between 0.33 and 0.89 psu. Overall, the four products show generally good consistency in spatial distribution with the Atlantic side being more saline than the Pacific side. A good agreement between the ship and satellite measurements was also observed in the low salinity regions in the Arctic Ocean, where SSS in situ measurements are usually sparse, at the end of summer melt seasons. Some discrepancies including biases of about 1 psu between the products in spatial and temporal distribution are observed. These are due in part to differences in retrieval techniques, geophysical filtering, and sea ice and land masks. The monthly SSS retrievals in the Arctic from 2011 to 2015 showed variations (within ˜1 psu) consistent with effects of sea ice seasonal cycles. This study indicates that spaceborne observations capture the seasonality and interannual variability of SSS in the Arctic with reasonably good accuracy.

SMAP Data Assimilation at NASA SPoRT

Science.gov (United States)

Blankenship, Clay B.; Case, Jonathan L.; Zavodsky, Bradley T.

2016-01-01

The NASA Short-Term Prediction Research and Transition (SPoRT) Center maintains a near-real- time run of the Noah Land Surface Model within the Land Information System (LIS) at 3-km resolution. Soil moisture products from this model are used by several NOAA/National Weather Service Weather Forecast Offices for flood and drought situational awareness. We have implemented assimilation of soil moisture retrievals from the Soil Moisture Ocean Salinity (SMOS) and Soil Moisture Active/ Passive (SMAP) satellites, and are now evaluating the SMAP assimilation. The SMAP-enhanced LIS product is planned for public release by October 2016.

Application of endocrine disruptor screening program fish short-term reproduction assay: Reproduction and endocrine function in fathead minnow (Pimephales promelas) and killifish (Fundulus heteroclitus) exposed to Bermuda pond sediment.

Science.gov (United States)

Fort, Douglas J; Mathis, Michael; Fort, Chelsea E; Fort, Hayley M; Bacon, Jamie P

2015-06-01

A modified tier 1 Endocrine Disruptor Screening Program (EDSP) 21-d fish short-term reproduction assay (FSTRA) was used to evaluate the effects of sediment exposure from freshwater and brackish ponds in Bermuda on reproductive fecundity and endocrine function in fathead minnow (Pimephales promelas) and killifish (Fundulus heteroclitus). Reproductively active male and female fish were exposed to control sediment and sediment from 2 freshwater ponds (fathead minnow) and 2 marine ponds (killifish) contaminated with polyaromatic hydrocarbons and metals via flow-through exposure for 21 d. Reproductive fecundity was monitored daily. At termination, the status of the reproductive endocrine system was assessed by the gonadosomatic index, gonadal histology, plasma steroids (estrogen [E2], testosterone [T], and 11-ketotestosterone [11-KT]), steroidogenic enzymes (aromatase and combined 3β/17β -hydroxysteroid dehydrogenase [3β/17β-HSD]), and plasma vitellogenin (VTG). Decreased reproductive fecundity, lower male body weight, and altered endocrinological measures of reproductive status were observed in both species. Higher plasma T levels in female minnows and 11-KT levels in both male and female minnows and female killifish exposed to freshwater and brackish sediments, respectively. Decreased female E2 and VTG levels and gonadal cytochrome P19 (aromatase) activity were also found in sediment exposed females from both species. No effect on female 3β/17β-HSD activity was found in either species. The FSTRA provided a robust model capable of modification to evaluate reproductive effects of sediment exposure in fish. © 2015 SETAC.

Application of SMAP Data for Ocean Surface Remote Sensing

Science.gov (United States)

Fore, A.; Yueh, S. H.; Tang, W.; Stiles, B. W.; Hayashi, A.

2017-12-01

The Soil Moisture Active Passive (SMAP) mission was launched January 31st, 2015. It is designed to measure the soil moisture over land using a combined active / passive L-band system. Due to the Aquarius mission, L-band model functions for ocean winds and salinity are mature and are directly applicable to the SMAP mission. In contrast to Aquarius, the higher resolution and scanning geometry of SMAP allow for wide-swath ocean winds and salinities to be retrieved. In this talk we present the SMAP Sea Surface Salinity (SSS) and extreme winds dataset and its performance. First we discuss the heritage of SMAP SSS algorithms, showing that SMAP and Aquarius show excellent agreement in the ocean surface roughness correction. Then, we give an overview of some newly developed algorithms that are only relevant to the SMAP system; a new galaxy correction and land correction enabling SSS retrievals up to 40 km from coast. We discuss recent improvements to the SMAP data processing for version 4.0. Next we compare the performance of the SMAP SSS to in-situ salinity measurements obtained from ARGO floats, tropical moored buoys, and ship-based data. SMAP SSS has accuracy of 0.2 PSU on a monthly basis compared to ARGO gridded data in tropics and mid-latitudes. In tropical oceans, time series comparison of salinity measured at 1 m depth by moored buoys indicates SMAP can track large salinity changes within a month. Synergetic analysis of SMAP, SMOS, and Argo data allows us to identify and exclude erroneous buoy data from assessment of SMAP SSS. The resulting SMAP-buoy matchup analysis gives a mean standard deviation (STD) of 0.22 PSU and correlation of 0.73 on weekly scale; at monthly scale the mean STD decreased to 0.17 PSU and the correlation increased to 0.8. In addition to SSS, SMAP provides a view into tropical cyclones having much higher sensitivity than traditional scatterometers. We validate the high-winds using collocations with SFMR during tropical cyclones as well as

Survey of polyfluorinated chemicals (PFCs) in the atmosphere over the northeast Atlantic Ocean

Science.gov (United States)

Shoeib, Mahiba; Vlahos, Penny; Harner, Tom; Peters, Andrew; Graustein, Margaret; Narayan, Julie

2010-08-01

High volume air sampling in Bermuda, Sable Island (Nova Scotia) and along a cruise track from the Gulf of Mexico to northeast coast of the USA, was carried out to assess air concentrations, particle-gas partitioning and transport of polyfluorinated chemicals (PFCs) in this region. Samples were collected in the summer of 2007. Targeted compounds included the neutral PFCs: fluorotelomer alcohols (FTOHs), perfluoroalkyl sulfonamides (FOSAs) and perfluoroalkyl sulfonamido ethanols (FOSEs). Among the FTOHs, 8:2 FTOH was dominant in all samples. Sum of the concentration of FTOHs (gas+particle phase) were higher in Bermuda (mean, 34 pg m -3) compared to Sable Island (mean, 16 pg m -3). In cruise samples, sum of FTOHs were highly variable (mean, 81 pg m -3) reflecting contributions from land-based sources in the northeast USA with concentrations reaching as high as 156 pg m -3. Among the FOSAs and FOSEs, MeFOSE was dominant in all samples. In Bermuda, levels of MeFOSE were exceptionally high (mean, 62 pg m -3), exceeding the FTOHs. Sable Island samples also exhibited the dominance of MeFOSE but at a lower concentration (mean, 15 pg m -3). MeFOSE air concentrations (pg m -3) in cruise samples ranged from 1.6 to 73 and were not linked to land-based sources. In fact high concentrations of MeFOSE observed in Bermuda were associated with air masses that originated over the Atlantic Ocean. The partitioning to particles for 8:2 FTOH, 10:2 FTOH, MeFOSE and EtFOSE ranged from as high as 15 to 42% for cruise samples to 0.9 to 14% in Bermuda. This study provides key information for validating and developing partitioning and transport models for the PFCs.

Novel strongly correlated electron states in filled skutterudite lanthanide osmium antimonides

International Nuclear Information System (INIS)

Maple, M.B.; Frederick, N.A.; Ho, P.-C.; Yuhasz, W.M.; Sayles, T.A.; Butch, N.P.; Jeffries, J.R.; Taylor, B.J.

2005-01-01

Recent measurements on the filled skutterudite compounds Pr(Os 1-x Ru x ) 4 Sb 12 , NdOs 4 Sb 12 , and SmOs 4 Sb 12 are discussed. Pr(Os 1-x Ru x ) 4 Sb 12 displays superconductivity for all values of x with a minimum at x=0.6, and only the compounds with x 4 Sb 12 and the BCS superconductivity of PrRu 4 Sb 12 . NdOs 4 Sb 12 is a heavy fermion ferromagnet, with a sharp transition observed at 1.0K. SmOs 4 Sb 12 is also a heavy fermion material, and it may display weak ferromagnetic behavior below 2.6K

Organization-level predictors of sustained social movement participation.

Science.gov (United States)

Tesdahl, Eric A; Speer, Paul W

2015-03-01

Long-term sustained participation represents one of the most important resources available to community organizations and social movement organizations (SMOs). The participatory literature on community and SMOs has identified a host of individual-level factors that influence participation beyond initial engagement, and has more recently identified contextual factors that influence participation. This study builds upon current understandings of participation in SMOs by examining how sustained participation in movement activities is affected by two qualities of SMO settings: repertoire of organizational activity, and equality of staff contact with organization members to cultivate and facilitate individual participation. To this end, we employ multi-level regression techniques to examine longitudinal data on participation within 50 local chapters of a national congregation-based community organizing federation. We find that the conduct of organizational activities previously shown to increase levels of participation among individual persons does not necessarily lead to increases in aggregate or organization-level participation. Further, we find that conditions of unequal staff contact among organization members represent a notable drag on organization-level participation over time. Our findings suggest that organizers and organizational leaders may well see greater levels of participation in their organizations by simply re-distributing resources and opportunities more equitably within their organizations.

Assimilation of SMOS (and SMAP) Retrieved Soil Moisture into the Land Information System

Science.gov (United States)

Blankenship, Clay; Zavodsky, Bradley; Case, Jonathan; Stano, Geoffrey

2016-01-01

Goal: Accurate, high-resolution (approx.3 km) soil moisture in near-real time. Situational awareness (drought assessment, flood and fire threat). Local modeling applications (to improve sfc-PBL exchanges) Method: Assimilate satellite soil moisture retrievals into a land surface model. Combines high-resolution geophysical model data with latest satellite observations.

Molecular detection of ‘Candidatus Phytoplasma australasia’ and ‘Ca. P. cynodontis’ in Iraq

Directory of Open Access Journals (Sweden)

Alkuwaiti Nawres Abdulelah Sadeq

2017-10-01

Full Text Available The association of phytoplasma was investigated in symptomatic tomato (Solanum lycopersicum L., eggplant (Solanum melongen L., mallow (Malva spp. and Bermuda grass (Cynodon dactylon L. plants exhibiting witches’ broom and white leaf diseases, respectively. Total DNA was extracted from tomato (n=3, eggplant (n=2, mallow (n=2 and Bermuda grass (n=8 samples. Direct polymerase chain reaction (PCR was performed using P1/P7 primer set, then PCR products were sequenced. Sequences obtained from tomato, eggplant and mallow shared 99% maximum nucleotide identity with phytoplasma belonging to subgroup 16SrII-D, and resulted therefore ‘Candidatus Phytoplasma australasia’-related. Sequences obtained from Bermuda grass showed 100% maximum nucleotide identity to 16SrXIV-A subgroup and were ‘Ca. P. cynodontis’-related. The study presents the first molecular confirmation and sequence data of presence of ‘Ca. P. australasia’ and ‘Ca. P. cynodontis’ in Iraq.

The Contribution of Soil Moisture Information to Forecast Skill: Two Studies

Science.gov (United States)

Koster, Randal

2010-01-01

This talk briefly describes two recent studies on the impact of soil moisture information on hydrological and meteorological prediction. While the studies utilize soil moisture derived from the integration of large-scale land surface models with observations-based meteorological data, the results directly illustrate the potential usefulness of satellite-derived soil moisture information (e.g., from SMOS and SMAP) for applications in prediction. The first study, the GEWEX- and ClIVAR-sponsored GLACE-2 project, quantifies the contribution of realistic soil moisture initialization to skill in subseasonal forecasts of precipitation and air temperature (out to two months). The multi-model study shows that soil moisture information does indeed contribute skill to the forecasts, particularly for air temperature, and particularly when the initial local soil moisture anomaly is large. Furthermore, the skill contributions tend to be larger where the soil moisture initialization is more accurate, as measured by the density of the observational network contributing to the initialization. The second study focuses on streamflow prediction. The relative contributions of snow and soil moisture initialization to skill in streamflow prediction at seasonal lead, in the absence of knowledge of meteorological anomalies during the forecast period, were quantified with several land surface models using uniquely designed numerical experiments and naturalized streamflow data covering mUltiple decades over the western United States. In several basins, accurate soil moisture initialization is found to contribute significant levels of predictive skill. Depending on the date of forecast issue, the contributions can be significant out to leads of six months. Both studies suggest that improvements in soil moisture initialization would lead to increases in predictive skill. The relevance of SMOS and SMAP satellite-based soil moisture information to prediction are discussed in the context of these

Overview of the US JGOFS Bermuda Atlantic Time-series Study (BATS): a decade-scale look at ocean biology and biogeochemistry

Science.gov (United States)

Steinberg, Deborah K.; Carlson, Craig A.; Bates, Nicholas R.; Johnson, Rodney J.; Michaels, Anthony F.; Knap, Anthony H.

The Bermuda Atlantic Time-series Study (BATS) commenced monthly sampling in October 1988 as part of the US Joint Global Ocean Flux Study (JGOFS) program. The goals of the US JGOFS time-series research are to better understand the basic processes that control ocean biogeochemistry on seasonal to decadal time-scales, determine the role of the oceans in the global carbon budget, and ultimately improve our ability to predict the effects of climate change on ecosystems. The BATS program samples the ocean on a biweekly to monthly basis, a strategy that resolves major seasonal patterns and interannual variability. The core cruises last 4-5 d during which hydrography, nutrients, particle flux, pigments and primary production, bacterioplankton abundance and production, and often complementary ancillary measurements are made. This overview focuses on patterns in ocean biology and biogeochemistry over a decade at the BATS site, concentrating on seasonal and interannual changes in community structure, and the physical forcing and other factors controlling the temporal dynamics. Significant seasonal and interannual variability in phytoplankton and bacterioplankton production, biomass, and community structure exists at BATS. No strong relationship exists between primary production and particle flux during the 10 yr record, with the relationship slightly improved by applying an artificial lag of 1 week between production and flux. The prokaryotic picoplankton regularly dominate the phytoplankton community; diatom blooms are rare but occur periodically in the BATS time series. The increase in Chl a concentrations during bloom periods is due to increases by most of the taxa present, rather than by any single group, and there is seasonal succession of phytoplankton. The bacterioplankton often dominate the living biomass, indicating the potential to consume large amounts of carbon and play a major ecological role within the microbial food web. Bacterial biomass, production, and

Isotopic composition of skeleton-bound organic nitrogen in reef-building symbiotic corals: A new method and proxy evaluation at Bermuda

Science.gov (United States)

Wang, X. T.; Sigman, D. M.; Cohen, A. L.; Sinclair, D. J.; Sherrell, R. M.; Weigand, M. A.; Erler, D. V.; Ren, H.

2015-01-01

The skeleton-bound organic nitrogen in reef-building symbiotic corals may be a high-resolution archive of ocean nitrogen cycle dynamics and a tool for understanding coral biogeochemistry and physiological processes. However, the existing methods for measuring the isotopic composition of coral skeleton-bound organic nitrogen (hereafter, CS-δ15N) either require too much skeleton material or have low precision, limiting the applications of this relatively new proxy. In addition, the controlling factors on CS-δ15N remain poorly understood: the δ15N of source nitrogen and the internal nitrogen cycle of the coral/zooxanthellae symbiosis may both be important. Here, we describe a new ("persulfate/denitrifier"-based) method for measuring CS-δ15N, requiring only 5 mg of skeleton material and yielding a long-term precision better than 0.2‰ (1σ). Using this new method, we investigate CS-δ15N at Bermuda. Ten modern Diploria labyrinthiformis coral cores/colonies from 4 sampling sites were measured for CS-δ15N. Nitrogen concentrations (nitrate + nitrite, ammonium, and dissolved organic nitrogen) and δ15N of plankton were also measured at these coral sites. Among the 4 sampling sites, CS-δ15N shows an increase with proximity to the island, from ∼3.8‰ to ∼6.8‰ vs. atmospheric N2, with the northern offshore site having a CS-δ15N 1-2‰ higher than the δ15N of thermocline nitrate in the surrounding Sargasso Sea. Two annually resolved CS-δ15N time series suggest that the offshore-inshore CS-δ15N gradient has persisted since at least the 1970s. Plankton δ15N among these 4 sites also has an inshore increase, but of only ∼1‰. Coral physiological change must explain the remaining (∼2‰) inshore increase in CS-δ15N, and previous work points to the coral/zooxanthellae N cycle as a control on host tissue (and thus carbonate skeletal) δ15N. The CS-δ15N gradient is hypothesized to result mainly from varying efficiency in the internal nitrogen recycling of the

Evaluation of the Precision of Satellite-Derived Sea Surface Temperature Fields

Science.gov (United States)

Wu, F.; Cornillon, P. C.; Guan, L.

2016-02-01

A great deal of attention has been focused on the temporal accuracy of satellite-derived sea surface temperature (SST) fields with little attention being given to their spatial precision. Specifically, the primary measure of the quality of SST fields has been the bias and variance of selected values minus co-located (in space and time) in situ values. Contributing values, determined by the location of the in situ values and the necessity that the satellite-derived values be cloud free, are generally widely separated in space and time hence provide little information related to the pixel-to-pixel uncertainty in the retrievals. But the main contribution to the uncertainty in satellite-derived SST retrievals relates to atmospheric contamination and because the spatial scales of atmospheric features are, in general, large compared with the pixel separation of modern infra-red sensors, the pixel-to-pixel uncertainty is often smaller than the accuracy determined from in situ match-ups. This makes selection of satellite-derived datasets for the study of submesoscale processes, for which the spatial structure of the upper ocean is significant, problematic. In this presentation we present a methodology to characterize the spatial precision of satellite-derived SST fields. The method is based on an examination of the high wavenumber tail of the 2-D spectrum of SST fields in the Sargasso Sea, a low energy region of the ocean close to the track of the MV Oleander, a container ship making weekly roundtrips between New York and Bermuda, with engine intake temperatures sampled every 75 m along track. Important spectral characteristics are the point at which the satellite-derived spectra separate from the Oleander spectra and the spectral slope following separation. In this presentation a number of high resolution 375 m to 10 km SST datasets are evaluated based on this approach.

IgE profiles of Bermuda grass pollen sensitised patients evaluated by Phleum pratense allergens Phl P 1, 2, 4, 5, 6 , 7, 11, 12.

Science.gov (United States)

Rossi, Renato E; Monasterolo, Giorgio; Prina, Paolo; Coco, Giuseppe; Operti, Daniela; Rossi, Lucilla

2008-06-01

Despite the difference in geographical dominance of certain grasses, a high degree of allergenic similarity or cross-reactivity between Bermuda grass pollen (BGP) and timothy grass pollen (TGP) has been previously demonstrated. The aim of the present study was to ascertain the sensitisation to TGP in 411 patients known for their reactivity to BGP extracts by analysing their reactivity to crude timothy pollen extract and timothy pollen purified allergens, establishing their specific IgE-profiles. Using the immunoenzymatic CAP method we evaluated IgE-specific antibodies for BGP- and TGP- extracts and the timothy recombinant (r) and natural (n) allergens rPhl p 1, rPhl p 2, nPhl p 4, rPhl p 5, rPhl p 6, rPhl p 7, rPhl p 11, and rPhl p 12. BGP-IgE positive patients (median = 8.0 kUA/l, 2.8-22.2 kUA/l 25th-75th percentile) simultaneously had IgE positive results for TGP (100% of subjects)(median = 48.9 kUA/l, 19.8- > 100 kUA/l 25th-75th percentile) and high prevalence of sensitization to 6/8 Phleum pratense allergens (Phl p 1, 2, 4, 5, 6, 11, markers of genuine sensitisation to TGP) other than profilin and calcium binding protein. More than 72% of BGP allergic patients were co-sensitised to rPhl p 1, rPhl p 2, nPhl p 4, rPhl p 5, rPhl p 6. A decrease of total and specific IgE with patients' age was observed. Our data show that all BGP-allergic patients simultaneously exhibit higher IgE antibody levels to recombinant and natural P. pratense allergens as well as to crude TGP extract. This suggests that when choosing an immunotherapeutic regimen for BGP-sensitised patients (after establishing their IgE profile via purified TGP-allergens), subcutaneous or sublingual TGP-extract vaccines in appropriate doses, in order to influence T epitope specificity, might be beneficial. Though extremely uncommon, in cases where a patient is exclusively BGP allergen-sensitised, BGP-extract therapy is the appropriate therapeutic response.

Dynamics of the Seychelles-Chagos Thermocline Ridge

Science.gov (United States)

Bulusu, S.

2016-02-01

The southwest tropical Indian Ocean (SWTIO) features a unique, seasonal upwelling of the thermocline also known as the Seychelles-Chagos Thermocline Ridge (SCTR). More recently, this ridge or "dome"-like feature in the thermocline depth at (55°E-65°E, 5°S-12°S) in the SWTIO has been linked to interannual variability in the semi-annual Indian Ocean monsoon seasons as well as the Madden-Julian Oscillation (MJO) and El Niño Southern Oscillation (ENSO). The SCTR is a region where the MJO is associated with strong SST variability. Normally more cyclones are found generated in this SCTR region when the thermocline is deeper, which has a positive relation to the arrival of a downwelling Rossby wave from the southeast tropical Indian Ocean. Previous studies have focused their efforts solely on sea surface temperature (SST) because they determined salinity variability to be low, but with the Soil Moisture and Ocean Salinity (SMOS), and Aquarius salinity missions new insight can be shed on the effects that the seasonal upwelling of the thermocline has on Sea Surface Salinity (SSS). Seasonal SSS anomalies these missions will reveal the magnitude of seasonal SSS variability, while Argo depth profiles will show the link between changes in subsurface salinity and temperature structure. A seasonal increase in SST and a decrease in SSS associated with the downwelling of the thermocline have also been shown to occasionally generate MJO events, an extremely important part of climate variability in the Indian ocean. Satellite derives salinity and Argo data can help link changes in surface and subsurface salinity structure to the generation of the important MJO events. This study uses satellite derived salinity from Soil Moisture and Ocean Salinity (SMOS), and Aquarius to see if these satellites can yield new information on seasonal and interannual surface variability. In this study barrier layer thickness (BLT) estimates will be derived from satellite measurements using a

Hidden in the mangrove forest: the cryptic intertidal mite Carinozetes mangrovi sp. nov. (Acari, Oribatida, Selenoribatidae).

Science.gov (United States)

Pfingstl, Tobias; Lienhard, Andrea; Jagersbacher-Baumann, Julia

2014-08-01

The small archipelago of Bermuda is a geologically young landmass in the Western Atlantic Ocean and recently turned out to be inhabited by a number of intertidal oribatid mites. One newly described species, Carinozetes bermudensis, showed an unusual vast range of habitats like sandy beaches, rocky substrate and mangroves. In the present study, 13 Bermudian populations of C. bermudensis were analysed to verify species integrity of specimens from different microhabitats. A morphometric analysis of 17 continuous variables as well as a molecular genetic investigation of the mitochondrial cytochrome oxidase subunit I revealed the existence of a new species Carinozetes mangrovi sp. nov., inhabiting exclusively intertidal algae growing on mangrove roots. Although both species are morphologically nearly identical, the configuration of the genus-specific ventral carinae represents a clear diagnostic character. The high genetic divergence of approximately 12 % of the cytochrome oxidase subunit I gene sequence between C. bermudensis and C. mangrovi sp. nov. suggests that these two species diverged before the emergence of the Bermuda islands. Accordingly, both of them are older than the geologically young archipelago of Bermuda.

Evaluation of Warm Season Turfgrass under Different Irrigation Regimes in Arid Region

Directory of Open Access Journals (Sweden)

Abdullah Mohd Hassan ALSHEHHI

2010-09-01

Full Text Available Turfgrasses play a very important role in enhancing quality of life in modern urban living. Water quantity is the most important challenge worldwide in establishing and maintaining quality turf. The present study was aimed to test the performance of three warm season turfgrasses under four water levels for plantation in arid zones. Pits (48 measuring 1m length x 1m width x 0.6 m depth were planted with four replications of Common Bermuda grass (Cynodon dactylon, Tifway Bermuda grass (Cynodon dactylon x transvaalensis and Seashore Paspalum grass (Paspalum vaginatum in complete randomized design (CRD. Irrigation was done daily with 15 l/plot during the first 4 weeks (establishment period and four irrigation levels (5, 10, and 15, 20 l/lot were maintained in the following 8 weeks (treatment period. Physical parameters (canopy temperatures, ambient temperature, leaf area, shoot production and relative water content were measured once in two week as well as the visual quality (shoot color, shoot density and shoot uniformity was assessed, however, chlorophyll analysis was done in the end of the study. It was found that temperature has significant effect on performance of turfgrasses. Canopy temperature was higher than ambient temperature in the three turfgrasses but it has different level in each variety. Five liter of water per day per square meter gave acceptable turf quality when ambient temperature ranged from 20 to 33�C. Seashore paspalum performed best followed by Tifway Bermuda grass and common Bermuda grass respectively.

78 FR 52099 - Onions Other Than Bermuda-Granex-Grano/Creole; Bermuda-Granex-Grano

Science.gov (United States)

2013-08-22

... Washington State, which is outside of marketing order 958, has packed mixed colors of larger Walla Walla type... permitting mixed colors when designated as a specialty or mixed pack will facilitate the marketing of onions..., August 22, 2013 / Proposed Rules#0;#0; [[Page 52099

CAROLS SMOS CAL/VAL Campaigns

DEFF Research Database (Denmark)

Zribi, M.; Pardé, M.; Boutin, J.

2011-01-01

The CAROLS \\Cooperative Airborne Radiometer for Ocean and Land Studies" L band radiometer was designed and built as a copy of the EMIRAD II radiometer constructed by the Technical University of Denmark team. It is a fully polarimetric and direct sampling corre- lation radiometer. CAROLS is instal...

The SMOS Mediterranean Ecosystem L-Band characterisation EXperiment (MELBEX-I) over natural shrubs

DEFF Research Database (Denmark)

Cano, Aurelio; Saleh, Kauzar; Wigneron, Jean-Pierre

2010-01-01

shrub land, as no data were available over this biome. For that purpose, multi-angular and dual polarimetric measurements (H, V) were obtained by the EMIRAD L-band radiometer from a 14-m tower. Results of this study indicate a small and constant impact of vegetation on the microwave emission of shrub...... land, and L-MEB parameters for shrub land were obtained. In addition, the study highlights the need for calibrating microwave soil roughness, which was found to be constant at the site. Depending on the number of retrieved parameters, soil moisture (SM) near the surface could be estimated with errors...

Assimilation of global radar backscatter and radiometer brightness temperature observations to improve soil moisture and land evaporation estimates

NARCIS (Netherlands)

Lievens, H.; Martens, B.; Verhoest, N.E.C.; Hahn, S.; Reichle, R.H.; Gonzalez Miralles, D.

2016-01-01

Active radar backscatter (σ°) observations from the Advanced Scatterometer (ASCAT) and passive radiometer brightness temperature (TB) observations from the Soil Moisture Ocean Salinity (SMOS) mission are assimilated either individually or jointly into the Global Land Evaporation Amsterdam Model

Mass spectrometric analysis of electrophoretically separated allergens and proteases in grass pollen diffusates

Directory of Open Access Journals (Sweden)

Geczy Carolyn L

2003-09-01

Full Text Available Abstract Background Pollens are important triggers for allergic asthma and seasonal rhinitis, and proteases released by major allergenic pollens can injure airway epithelial cells in vitro. Disruption of mucosal epithelial integrity by proteases released by inhaled pollens could promote allergic sensitisation. Methods Pollen diffusates from Kentucky blue grass (Poa pratensis, rye grass (Lolium perenne and Bermuda grass (Cynodon dactylon were assessed for peptidase activity using a fluorogenic substrate, as well as by gelatin zymography. Following one- or two-dimensional gel electrophoresis, Coomassie-stained individual bands/spots were excised, subjected to tryptic digestion and analysed by mass spectrometry, either MALDI reflectron TOF or microcapillary liquid chromatography MS-MS. Database searches were used to identify allergens and other plant proteins in pollen diffusates. Results All pollen diffusates tested exhibited peptidase activity. Gelatin zymography revealed high Mr proteolytic activity at ~ 95,000 in all diffusates and additional proteolytic bands in rye and Bermuda grass diffusates, which appeared to be serine proteases on the basis of inhibition studies. A proteolytic band at Mr ~ 35,000 in Bermuda grass diffusate, which corresponded to an intense band detected by Western blotting using a monoclonal antibody to the timothy grass (Phleum pratense group 1 allergen Phl p 1, was identified by mass spectrometric analysis as the group 1 allergen Cyn d 1. Two-dimensional analysis similarly demonstrated proteolytic activity corresponding to protein spots identified as Cyn d 1. Conclusion One- and two-dimensional electrophoretic separation, combined with analysis by mass spectrometry, is useful for rapid determination of the identities of pollen proteins. A component of the proteolytic activity in Bermuda grass diffusate is likely to be related to the allergen Cyn d 1.

Extreme events monitoring from space

Science.gov (United States)

Kerr, Yann; Bitar, Ahmad Al; Mahmoodi, Ali; Richaume, Philippe; Al-Yaari, Amen; Wigneron, Jean-Pierre

2016-04-01

The SMOS (Soil Moisture and Ocean Salinity) satellite was successfully launched in November 2009. This ESA led mission for Earth Observation is dedicated to provide soil moisture over continental surface (with an accuracy goal of 0.04 m3/m3), vegetation water content over land, and ocean salinity. These geophysical features are important as they control the energy balance between the surface and the atmosphere. Their knowledge at a global scale is of interest for climatic and weather researches, and in particular in improving model forecasts. The Soil Moisture and Ocean Salinity mission has now been collecting data for 6 years. The whole data set has just been reprocessed (Version 620 for levels 1 and 2 and version 3 for level 3 CATDS). After 6 years it seems important to start using data for having a look at anomalies and see how they can relate to large scale events The purpose of this communication is to present the mission results after more than six years in orbit in a climatic trend perspective, as through such a period anomalies can be detected. Thereby we benefit from consistent datasets provided through the latest reprocessing using most recent algorithm enhancements. Using the above mentioned products it is possible to follow large events such as the evolution of the droughts in North America, or water fraction evolution over the Amazonian basin. In this occasion we will focus on the analysis of SMOS and ancillary products anomalies to reveal two climatic trends, the temporal evolution of water storage over the Indian continent in relation to rainfall anomalies, and the global impact of El Nino types of events on the general water storage distribution. This presentation shows in detail the use of long term data sets of L-band microwave radiometry in two specific cases, namely droughts and water budget over a large basin. Several other analyses are under way currently. Obviously, vegetation water content, but also dielectric constant, are carrying a wealth

The SMOS Validation Campaign 2010 in the Upper Danube Catchment: A Data Set for Studies of Soil Moisture, Brightness Temperature, and Their Spatial Variability Over a Heterogeneous Land Surface

DEFF Research Database (Denmark)

T. dall' Amico, Johanna; Schlenz, Florian; Loew, Alexander

2013-01-01

resolutions from roughly 400 m to 2 km. The contemporaneous distributed ground measurements include surface soil moisture, a detailed land cover map, vegetation height, phenology, and biomass. Furthermore, several ground stations provide continuous measurements of soil moisture and soil temperature as well...... infrared and L-band passive microwave data were collected together with spatially distributed in situ measurements. Two airborne radiometers, EMIRAD and HUT-2D, were used during the campaigns providing two complementary sets of measurements at incidence angles from 0$^{circ}$ to 40$^{circ}$ and with ground...

Potential of bias correction for downscaling passive microwave and soil moisture data

Science.gov (United States)

Passive microwave satellites such as SMOS (Soil Moisture and Ocean Salinity) or SMAP (Soil Moisture Active Passive) observe brightness temperature (TB) and retrieve soil moisture at a spatial resolution greater than most hydrological processes. Bias correction is proposed as a simple method to disag...

Recent Advances in Antenna Measurement Techniques at the DTU-ESA Spherical Near-Field Antenna Test Facility

DEFF Research Database (Denmark)

Breinbjerg, Olav; Pivnenko, Sergey; Kim, Oleksiy S.

2014-01-01

This paper reports recent antenna measurement projects and research at the DTU-ESA Spherical Near-Field Antenna Test Facility at the Technical University of Denmark. High-accuracy measurement projects for the SMOS, SENTINEL-1, and BIOMASS missions of the European Space Agency were driven...

Channeling Black Insurgency: Elite Patronage and Professional Social Movement Organizations in the Development of the Black Movement.

Science.gov (United States)

Jenkins, J. Craig; Eckert, Craig M.

1986-01-01

Critically evaluates the theory of patronage and professional social movement organizations (SMOs) in interpreting the development of black insurgency between 1953 and 1980. Findings support and contradict the social contract theory. Professionalization was only one of many reasons for the movement's decline. (Author/PS)

Appendix to the contribution by G.B. Engelen on the origin of the Bermuda Rise

NARCIS (Netherlands)

Bemmelen, R.W. van

The basic concepts of the contribution, according to the undation theory as it stands presently are as follows. The earth’s surface is not a pure ellipsoid of rotation, but a geoid which shows extensive bulges and depressions (geo-undations). The physico-chemical processes disturb the theostatic

19 CFR 4.22 - Exemptions from special tonnage taxes.

Science.gov (United States)

2010-04-01

... Bahrain Bangladesh Barbados Belgium Belize Bermuda Bolivia Brazil Bulgaria Burma Canada Chile Colombia... Pakistan Panama Papua New Guinea Paraguay People's Republic of China Peru Philippines Poland Portugal Qatar...

Innovative Business Cases for Energy Storage In a Restructured Electricity Marketplace, A Study for the DOE Energy Storage Systems Program

Energy Technology Data Exchange (ETDEWEB)

IANNUCCI, JOE; EYER, JIM; BUTLER, PAUL C.

2003-02-01

This report describes the second phase of a project entitled ''Innovative Business Cases for Energy Storage in a Restructured Electricity Marketplace''. During part one of the effort, nine ''Stretch Scenarios'' were identified. They represented innovative and potentially significant uses of electric energy storage. Based on their potential to significantly impact the overall energy marketplace, the five most compelling scenarios were identified. From these scenarios, five specific ''Storage Market Opportunities'' (SMOs) were chosen for an in-depth evaluation in this phase. The authors conclude that some combination of the Power Cost Volatility and the T&D Benefits SMOs would be the most compelling for further investigation. Specifically, a combination of benefits (energy, capacity, power quality and reliability enhancement) achievable using energy storage systems for high value T&D applications, in regions with high power cost volatility, makes storage very competitive for about 24 GW and 120 GWh during the years of 2001 and 2010.

78 FR 22296 - Notice Pursuant to the National Cooperative Research and Production Act of 1993-Heterogeneous...

Science.gov (United States)

2013-04-15

.... Specifically, Analog Devices Inc., Norwood, MA; University of Bologna, Bologna, ITALY; Sandia Corporation, Albuquerque, NM; Marvell International LTD, Hamilton, HM, BERMUDA; Swarm64 GmbH, Berlin, GERMANY; Sony Mobile...

Hemicellulose conversion by anaerobic digestion

Energy Technology Data Exchange (ETDEWEB)

Ghosh, S; Honry, M P; Christopher, R W

1985-01-01

This research was undertaken to study the digestibility of the hemicellulose fractions of an aquatic biomass, a land-based biomass and a biomass-waste blend under various fermentation conditions. The conversion of hemicellulose was higher than those of cellulose and protein under the mesophilic condition. Hemicellulose was converted at a much lower efficency than cellulose during thermophilic digestion. In contrast, cellulose conversion was about the same under mesophilic and thermophilic conditions. Cellulose was utilized in preference to hemicellulose during mesophilic fermentation of nitrogen-supplemented Bermuda grass. It was speculated that Bermuda grass cellulose was converted at a higher efficiency than hemicellulose in the pressure of external nitrogen because the metabolism of the breakdown product (glucose) of cellulose required the least investment of enzymes and energy. 4 references.

L-Band RFI in Japan

Science.gov (United States)

Soldo, Yan; de Matthaeis, Paolo; Le Vine, David M.

2016-01-01

In recent years, three instruments have been launched into orbit with the aim of producing global maps of sea surface salinity and soil moisture using the 1400-1427 MHz band: SMOS, Aquarius and SMAP. Although this frequency band is allocated to passive measurements only, RFI (Radio-Frequency Interference) is present in the data of all three missions. On a global scale, the three sensors have observed approximately the same distribution of RFI. Japan is an important exception that has implications for the design of RFI detection algorithms. RFI in Japan is caused by a large number of emitters belonging to the same system (TV receivers) and for this reason some traditional RFI detection strategies detect little to no RFI over Japan. The study of this case has led to an improvement of the approach to detect RFI in Aquarius data.

Use of IRI to Model the Effect of Ionosphere Emission on Earth Remote Sensing at L-Band

Science.gov (United States)

Abraham, Saji; LeVine, David M.

2004-01-01

Microwave remote sensing in the window at 1.413 GHz (L-band) set aside for passive use only is important for monitoring sea surface salinity and soil moisture. These parameters are important for understanding ocean dynamics and energy exchange between the surface and atmosphere, and both NASA and ESA plan to launch satellite sensors to monitor these parameters at L-band (Aquarius, Hydros and SMOS). The ionosphere is an important source of error for passive remote sensing at this frequency. In addition to Faraday rotation, emission from the ionosphere is also a potential source of error at L-band. As an aid for correcting for emission, a regression model is presented that relates ionosphere emission to the integrated electron density (TEC). The goal is to use TEC from sources such as TOPEX, JASON or GPS to obtain estimates of emission over the oceans where the electron density profiles needed to compute emission are not available. In addition, data will also be presented to evaluate the use of the IRI for computing emission over the ocean.

On-board digital RFI and polarimetry processor for future spaceborne radiometer systems

DEFF Research Database (Denmark)

Skou, Niels; Kristensen, Steen Savstrup; Ruokokoski, T.

2012-01-01

Man-made Radio Frequency Interference (RFI) is an increasingly threatening problem for passive microwave radiometry from space. The problem is presently very evident in L-band data from SMOS, but it is realized that it is already now a problem at other traditional radiometer bands at C, X, and Ku...

Microwave interferometric radiometry in remote sensing: An invited historical review

DEFF Research Database (Denmark)

Martin-Neira, M.; LeVine, D. M.; Kerr, Y.

2014-01-01

The launch of the Soil Moisture and Ocean Salinity (SMOS) mission on 2 November 2009 marked a milestone in remote sensing for it was the first time a radiometer capable of acquiring wide field of view images at every single snapshot, a unique feature of the synthetic aperture technique, made...

Calibration of the L-MEB model over a coniferous and a deciduous forest

DEFF Research Database (Denmark)

Grant, Jennifer P.; Saleh-Contell, Kauzar; Wigneron, Jean-Pierre

2008-01-01

In this paper, the L-band Microwave Emission of the Biosphere (L-MEB) model used in the Soil Moisture and Ocean Salinity (SMOS) Level 2 Soil Moisture algorithm is calibrated using L-band (1.4 GHz) microwave measurements over a coniferous (Pine) and a deciduous (mixed/Beech) forest. This resulted...

Spaceborne L-band Radiometers: Push-broom or Synthetic Aperture?

DEFF Research Database (Denmark)

Skou, Niels

2004-01-01

L-band radiometers can measure ocean salinity and soil moisture from space. A synthetic aperture radiometer system, SMOS, is under development by ESA for launch in 2007. A real aperture push-broom system, Aquarius, has been approved by NASA for launch in 2008. Pros et cons of the two fundamentally...

Changes of 2H and 18O enrichment of meteoric water and Pleistocene glaciation

International Nuclear Information System (INIS)

Harmon, R.S.; Schwarcz, H.P.

1981-01-01

Isotopic data on fluid inclusions and host speleothems are presented which support the hypothesis that the deltaD-delta 18 O relationship for modern meteoric waters may have changed during the Pleistocene glacial periods in response to increased ocean surface air humidity. Palaeotemperatures for five areas of east-central North America and Bermuda, calculated assuming the present deltaDdelta 18 O meteoric water relationship for fluid inclusion waters, are observed to be too low during late Pleistocene glacial periods (in some instances falling below O 0 C) while interglacial palaeotemperatures are largely equivalent to those in the areas at present. As speleothem deposition cannot occur at subzero temperatures, a possible solution to this dilemma is a shift in the intercept of the meteoric water relationship. (U.K.)

Multibeam collection for BermudaCaves2009: Multibeam data collected aboard Endurance from 2009-09-05 to 2009-09-30, Flatts Village, Bermuda to Flatts Village, Bermuda

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — This data set is part of a larger set of data called the Multibeam Bathymetry Database (MBBDB) where other similar data can be found at...

On the doubtful records of Alvania platycephala, Alvania pagodula and Alvania didyma, with the description of two new rissoid species (Mollusca; Gastropoda: Rissoidae)

OpenAIRE

Faber, M.J.; Moolenbeek, R.G.

1987-01-01

Two new species of Alvania are described from Bermuda. Both species have been wrongly identified in the past. The generic classification is discussed but a definitive statement based only on conchological characters seems impossible.

Development of new techniques of using irradiation in the genetic improvement of warm season grasses and an assessment of the genetic and cytogenetic effects. Progress report, May 1, 1975--April 30, 1976

International Nuclear Information System (INIS)

Burton, G.W.; Hanna, W.W.

1976-06-01

Irradiation ( 60 Coγ source) was used for the genetic improvement of several warm season grasses and pearl millet. Results of plant breeding experiments using radioinduced mutants of Bermuda grass and millet are reported

A Finescale Lagrangian Instrument System

National Research Council Canada - National Science Library

Toole, John

2003-01-01

... from conventional, bottom-anchored moorings. An initial trial of the concept targeting the upper ocean was carried out off Bermuda in November 2001 with an instrument profiling between 12 and 28O-m depth...

Lionfish (Pterois spp.) invade the upper-bathyal zone in the western Atlantic.

Science.gov (United States)

Gress, Erika; Andradi-Brown, Dominic A; Woodall, Lucy; Schofield, Pamela J; Stanley, Karl; Rogers, Alex D

2017-01-01

Non-native lionfish have been recorded throughout the western Atlantic on both shallow and mesophotic reefs, where they have been linked to declines in reef health. In this study we report the first lionfish observations from the deep sea (>200 m) in Bermuda and Roatan, Honduras, with lionfish observed to a maximum depth of 304 m off the Bermuda platform, and 250 m off West End, Roatan. Placed in the context of other deeper lionfish observations and records, our results imply that lionfish may be present in the 200-300 m depth range of the upper-bathyal zone across many locations in the western Atlantic, but currently are under-sampled compared to shallow habitats. We highlight the need for considering deep-sea lionfish populations in future invasive lionfish management.

Lionfish (Pterois spp. invade the upper-bathyal zone in the western Atlantic

Directory of Open Access Journals (Sweden)

Erika Gress

2017-08-01

Full Text Available Non-native lionfish have been recorded throughout the western Atlantic on both shallow and mesophotic reefs, where they have been linked to declines in reef health. In this study we report the first lionfish observations from the deep sea (>200 m in Bermuda and Roatan, Honduras, with lionfish observed to a maximum depth of 304 m off the Bermuda platform, and 250 m off West End, Roatan. Placed in the context of other deeper lionfish observations and records, our results imply that lionfish may be present in the 200–300 m depth range of the upper-bathyal zone across many locations in the western Atlantic, but currently are under-sampled compared to shallow habitats. We highlight the need for considering deep-sea lionfish populations in future invasive lionfish management.

allergenicity and cross- reactivity of buffalo grass (stenotaphrum ...

African Journals Online (AJOL)

Bermuda on solid phase, but 100% inhibition was never achieved, indicating .... injected intraperitoneally into male Balb/c mice, with boosting at 2-week intervals ..... particles (DEPs), industrial emissions and wood smoke from the burgeoning ...

Seitse paika, mis peidavad mõistatusi / Till Hein

Index Scriptorium Estoniae

Hein, Till

2009-01-01

Kayaikhtiyo stuupa Birmas, Nazca Peruus, püramiidid Egiptuses, Meoto-Iwa Jaapanis, Stonehenge Inglismaal, Machu Picchu Peruus ja Bermuda kolmnurk Sargasso meres on paigad, mille lahtiseletamise üle on murdnud pead mitu põlvkonda inimesi

Arctic sea ice signatures: L-band brightness temperature sensitivity comparison using two radiation transfer models

Science.gov (United States)

Richter, Friedrich; Drusch, Matthias; Kaleschke, Lars; Maaß, Nina; Tian-Kunze, Xiangshan; Mecklenburg, Susanne

2018-03-01

Sea ice is a crucial component for short-, medium- and long-term numerical weather predictions. Most importantly, changes of sea ice coverage and areas covered by thin sea ice have a large impact on heat fluxes between the ocean and the atmosphere. L-band brightness temperatures from ESA's Earth Explorer SMOS (Soil Moisture and Ocean Salinity) have been proven to be a valuable tool to derive thin sea ice thickness. These retrieved estimates were already successfully assimilated in forecasting models to constrain the ice analysis, leading to more accurate initial conditions and subsequently more accurate forecasts. However, the brightness temperature measurements can potentially be assimilated directly in forecasting systems, reducing the data latency and providing a more consistent first guess. As a first step towards such a data assimilation system we studied the forward operator that translates geophysical parameters provided by a model into brightness temperatures. We use two different radiative transfer models to generate top of atmosphere brightness temperatures based on ORAP5 model output for the 2012/2013 winter season. The simulations are then compared against actual SMOS measurements. The results indicate that both models are able to capture the general variability of measured brightness temperatures over sea ice. The simulated brightness temperatures are dominated by sea ice coverage and thickness changes are most pronounced in the marginal ice zone where new sea ice is formed. There we observe the largest differences of more than 20 K over sea ice between simulated and observed brightness temperatures. We conclude that the assimilation of SMOS brightness temperatures yields high potential for forecasting models to correct for uncertainties in thin sea ice areas and suggest that information on sea ice fractional coverage from higher-frequency brightness temperatures should be used simultaneously.

Arctic sea ice signatures: L-band brightness temperature sensitivity comparison using two radiation transfer models

Directory of Open Access Journals (Sweden)

F. Richter

2018-03-01

Full Text Available Sea ice is a crucial component for short-, medium- and long-term numerical weather predictions. Most importantly, changes of sea ice coverage and areas covered by thin sea ice have a large impact on heat fluxes between the ocean and the atmosphere. L-band brightness temperatures from ESA's Earth Explorer SMOS (Soil Moisture and Ocean Salinity have been proven to be a valuable tool to derive thin sea ice thickness. These retrieved estimates were already successfully assimilated in forecasting models to constrain the ice analysis, leading to more accurate initial conditions and subsequently more accurate forecasts. However, the brightness temperature measurements can potentially be assimilated directly in forecasting systems, reducing the data latency and providing a more consistent first guess. As a first step towards such a data assimilation system we studied the forward operator that translates geophysical parameters provided by a model into brightness temperatures. We use two different radiative transfer models to generate top of atmosphere brightness temperatures based on ORAP5 model output for the 2012/2013 winter season. The simulations are then compared against actual SMOS measurements. The results indicate that both models are able to capture the general variability of measured brightness temperatures over sea ice. The simulated brightness temperatures are dominated by sea ice coverage and thickness changes are most pronounced in the marginal ice zone where new sea ice is formed. There we observe the largest differences of more than 20 K over sea ice between simulated and observed brightness temperatures. We conclude that the assimilation of SMOS brightness temperatures yields high potential for forecasting models to correct for uncertainties in thin sea ice areas and suggest that information on sea ice fractional coverage from higher-frequency brightness temperatures should be used simultaneously.

Sliding Mode Observer-Based Current Sensor Fault Reconstruction and Unknown Load Disturbance Estimation for PMSM Driven System.

Science.gov (United States)

Zhao, Kaihui; Li, Peng; Zhang, Changfan; Li, Xiangfei; He, Jing; Lin, Yuliang

2017-12-06

This paper proposes a new scheme of reconstructing current sensor faults and estimating unknown load disturbance for a permanent magnet synchronous motor (PMSM)-driven system. First, the original PMSM system is transformed into two subsystems; the first subsystem has unknown system load disturbances, which are unrelated to sensor faults, and the second subsystem has sensor faults, but is free from unknown load disturbances. Introducing a new state variable, the augmented subsystem that has sensor faults can be transformed into having actuator faults. Second, two sliding mode observers (SMOs) are designed: the unknown load disturbance is estimated by the first SMO in the subsystem, which has unknown load disturbance, and the sensor faults can be reconstructed using the second SMO in the augmented subsystem, which has sensor faults. The gains of the proposed SMOs and their stability analysis are developed via the solution of linear matrix inequality (LMI). Finally, the effectiveness of the proposed scheme was verified by simulations and experiments. The results demonstrate that the proposed scheme can reconstruct current sensor faults and estimate unknown load disturbance for the PMSM-driven system.

Precipitation Estimation Using L-Band and C-Band Soil Moisture Retrievals

Science.gov (United States)

Koster, Randal D.; Brocca, Luca; Crow, Wade T.; Burgin, Mariko S.; De Lannoy, Gabrielle J. M.

2016-01-01

An established methodology for estimating precipitation amounts from satellite-based soil moisture retrievals is applied to L-band products from the Soil Moisture Active Passive (SMAP) and Soil Moisture and Ocean Salinity (SMOS) satellite missions and to a C-band product from the Advanced Scatterometer (ASCAT) mission. The precipitation estimates so obtained are evaluated against in situ (gauge-based) precipitation observations from across the globe. The precipitation estimation skill achieved using the L-band SMAP and SMOS data sets is higher than that obtained with the C-band product, as might be expected given that L-band is sensitive to a thicker layer of soil and thereby provides more information on the response of soil moisture to precipitation. The square of the correlation coefficient between the SMAP-based precipitation estimates and the observations (for aggregations to approximately100 km and 5 days) is on average about 0.6 in areas of high rain gauge density. Satellite missions specifically designed to monitor soil moisture thus do provide significant information on precipitation variability, information that could contribute to efforts in global precipitation estimation.

Herbage availability €rs a stress factor on grazed Coastcross II ...

African Journals Online (AJOL)

) relationships for Coastcross ll Bermuda grass grazed for four consecutive summer periods by young growing beef cattle. Stocking rate affected the daily. LWG/animal through its influence on herbage availability. Rota- tional grazing showed a ...

NOTES ON CLADOPHORA (CHLOROPHYCEAE). I. TWO NEW CARIBBEAN SPECIES CLADOPHORA JONGIORUM NOV. SP. AND CLADOPHORA LONGICELLULATA NOV. SP.

Science.gov (United States)

van den Hoek, C

1969-06-01

Two new Caribbean species of Cladophora are described: Cl. jongiorum from material collected on the coast of Curacao and Cl. longicellulata from specimens collected on Bermuda by various authors and wrongly identified as Cl. catenifera Kützing.

Environmental Assessment for the Proposed Construction of a Gas Station, Car-Care Center, Shoppette and Class Six, and Taco John’s Restaurant at Keesler Air Force Base, Biloxi, Harrison County, Mississippi

Science.gov (United States)

2003-01-01

Groundcover on base consists primarily of Bermuda grass ( Cynodon dactylon), centipede grass (Eremochloa ophiluroides), and St. Augustine grass...notification to allow adequate lime fori eview. COASTAL PROGRAM COMPLIANCE (Coastal ari • activities only) : ( ) The activity has been reviewed and

Micrallecto uncinata n. gen., n.sp., a parasitic copepod from a remarkable host, the pteropod Pneumoderma

NARCIS (Netherlands)

Stock, Jan H.

1971-01-01

A new genus and species of copepod crustacean parasite, Micrallecto uncinata, is described from Pneumoderma pygmaeum (Tesch, 1903), a gymnosome pteropod (Mollusca) collected West of Bermuda. The parasite probably belongs to the family Splanchnotrophidae and is the first copepod associate reported

Statistical Modelling of the Soil Dielectric Constant

Science.gov (United States)

Usowicz, Boguslaw; Marczewski, Wojciech; Bogdan Usowicz, Jerzy; Lipiec, Jerzy

2010-05-01

the soil type, and that way it enables clear comparing to results from other soil type dependent models. The paper is focused on proper representing possible range of porosity in commonly existing soils. This work is done with aim of implementing the statistical-physical model of the dielectric constant to a use in the model CMEM (Community Microwave Emission Model), applicable to SMOS (Soil Moisture and Ocean Salinity ESA Mission) data. The input data to the model clearly accepts definition of soil fractions in common physical measures, and in opposition to other empirical models, does not need calibrating. It is not dependent on recognition of the soil by type, but instead it offers the control of accuracy by proper determination of the soil compound fractions. SMOS employs CMEM being funded only by the sand-clay-silt composition. Common use of the soil data, is split on tens or even hundreds soil types depending on the region. We hope that only by determining three element compounds of sand-clay-silt, in few fractions may help resolving the question of relevance of soil data to the input of CMEM, for SMOS. Now, traditionally employed soil types are converted on sand-clay-silt compounds, but hardly cover effects of other specific properties like the porosity. It should bring advantageous effects in validating SMOS observation data, and is taken for the aim in the Cal/Val project 3275, in the campaigns for SVRT (SMOS Validation and Retrieval Team). Acknowledgements. This work was funded in part by the PECS - Programme for European Cooperating States, No. 98084 "SWEX/R - Soil Water and Energy Exchange/Research".

GenBank blastx search result: AK241729 [KOME

Lifescience Database Archive (English)

Full Text Available AK241729 J065199L10 AF018073.1 AF018073 Rhodobacter sphaeroides operon regulator (smoC), periplasmic sorbito...l-binding protein (smoE), sorbitol/mannitol transport inner membrane protein (smoF), sorbitol.../mannitol transport inner membrane protein (smoG), sorbitol/mannitol transport ATP-binding transport protein (smoK), sorbit...ol dehydrogenase (smoS), mannitol dehydrogenase (mtlK),

GenBank blastx search result: AK240874 [KOME

Lifescience Database Archive (English)

Full Text Available AK240874 J065025K09 AF018073.1 AF018073 Rhodobacter sphaeroides operon regulator (smoC), periplasmic sorbito...l-binding protein (smoE), sorbitol/mannitol transport inner membrane protein (smoF), sorbitol.../mannitol transport inner membrane protein (smoG), sorbitol/mannitol transport ATP-binding transport protein (smoK), sorbit...ol dehydrogenase (smoS), mannitol dehydrogenase (mtlK),

GenBank blastx search result: AK243680 [KOME

Lifescience Database Archive (English)

Full Text Available AK243680 J100090I20 AF018073.1 AF018073 Rhodobacter sphaeroides operon regulator (smoC), periplasmic sorbito...l-binding protein (smoE), sorbitol/mannitol transport inner membrane protein (smoF), sorbitol.../mannitol transport inner membrane protein (smoG), sorbitol/mannitol transport ATP-binding transport protein (smoK), sorbit...ol dehydrogenase (smoS), mannitol dehydrogenase (mtlK),

The DISAM Journal of International Security Assistance Management. Volume 26, Number 1, Fall 2003

Science.gov (United States)

2003-01-01

contribution to international peace and stability. Current Members of the Hall of Fame General Lojas Fodor, Commander, Hungarian Defense Forces and Chief of...Belize Bermuda Bolivia Brazil British Virgin Islands Cayman Islands Chile Colombia Costa Rica Cuba Dominica Dominican Republic Ecuador El

Role of Molecular Genetics in Identifying ‘Fine Tuned’ Natural Enemies of the Invasive Brazilian Peppertree, Schinus terebinthifolius

Science.gov (United States)

Brazilian peppertree is a highly successful invasive species in the continental United States, Hawaiian archipelago, several Caribbean Islands, Australia, Bermuda, and a number of other countries worldwide. It also is one of only a few invasive intraspecific hybrids that has been well characterized ...

Monoteísmo e Intolerância Religiosa e Política

Directory of Open Access Journals (Sweden)

Antonio Ozaí da Silva

2010-10-01

Full Text Available Este trabalho é uma reflexão sobre a relação entre monoteísmo e a intolerância religiosa e política presente na história. A premissa adotada afirma que os monoteísmos – judaico, cristão e islâmico – tendem a favorecer a intolerância entre os povos e em relação às opções religiosas e políticas dos indivíduos em suas respectivas nações. A dificuldade de aceitar o “outro” é, nessa perspectiva, inerente ao caráter monoteísta, isto é, à imposição de um Deus. A análise do politeísmo grego e da experiência monoteísta egípcia, resgatada por Freud, fornece elementos para pensarmos os monoteísmos que conhecemos.

Surface excitation parameter for rough surfaces

International Nuclear Information System (INIS)

Da, Bo; Salma, Khanam; Ji, Hui; Mao, Shifeng; Zhang, Guanghui; Wang, Xiaoping; Ding, Zejun

2015-01-01

Graphical abstract: - Highlights: • Instead of providing a general mathematical model of roughness, we directly use a finite element triangle mesh method to build a fully 3D rough surface from the practical sample. • The surface plasmon excitation can be introduced to the realistic sample surface by dielectric response theory and finite element method. • We found that SEP calculated based on ideal plane surface model are still reliable for real sample surface with common roughness. - Abstract: In order to assess quantitatively the importance of surface excitation effect in surface electron spectroscopy measurement, surface excitation parameter (SEP) has been introduced to describe the surface excitation probability as an average number of surface excitations that electrons can undergo when they move through solid surface either in incoming or outgoing directions. Meanwhile, surface roughness is an inevitable issue in experiments particularly when the sample surface is cleaned with ion beam bombardment. Surface roughness alters not only the electron elastic peak intensity but also the surface excitation intensity. However, almost all of the popular theoretical models for determining SEP are based on ideal plane surface approximation. In order to figure out whether this approximation is efficient or not for SEP calculation and the scope of this assumption, we proposed a new way to determine the SEP for a rough surface by a Monte Carlo simulation of electron scattering process near to a realistic rough surface, which is modeled by a finite element analysis method according to AFM image. The elastic peak intensity is calculated for different electron incident and emission angles. Assuming surface excitations obey the Poisson distribution the SEPs corrected for surface roughness are then obtained by analyzing the elastic peak intensity for several materials and for different incident and emission angles. It is found that the surface roughness only plays an

78 FR 77449 - GSA Approves Renewal of North American Numbering Council Charter Through September 20, 2015

Science.gov (United States)

2013-12-23

... on issues related to North American Numbering Plan (NANP) administration. The NANP is the telephone numbering plan for the United States and its territories, Canada, Bermuda, and 17 Caribbean nations. The... annual evaluations of the current North American Numbering Plan Administrator, the Pooling Administrator...

Pig genome sequence - analysis and publication strategy

DEFF Research Database (Denmark)

Archibald, Alan L.; Bolund, Lars; Churcher, Carol

2010-01-01

preferentially selected for sequencing. In accordance with the Bermuda and Fort Lauderdale agreements and the more recent Toronto Statement the data have been released into public sequence repositories (Genbank/EMBL, NCBI/Ensembl trace repositories) in a timely manner and in advance of publication. CONCLUSIONS...

Error characterization methods for surface soil moisture products from remote sensing

International Nuclear Information System (INIS)

Doubková, M.

2012-01-01

(AWRA-L) hydrological model, OzNET in-situ stations, and several other coarse resolution data sources were used. The results are combined to provide an exhaustive estimate of all qualities of the ASAR GM SSM product. The third objective is to provide guidance on appropriate evaluation methodology applicable to any SSM product. For this purpose the results of the ASAR GM evaluation analyzed are discussed from a general perspective and restructured to answer scientific questions identified in the introductory part of the thesis. These include: * Can we apply the evaluation requirements from comparable missions such as SMOS and SMAP to ASAR GM SSM? * How does spatial resolution influence error estimates? * Is there a single measure to describe the quality of SSM data? * What is the quality and what are the limitations of ASAR GM SSM? * Learning from ASAR GM SSM errors for Sentinel-1 The findings and suggestions originating from the discussion are transferable to other satellite-derived soil moisture data. Of special interest is its transfer to data from the planned Sentinel-1 SAR sensor that shares similar technical characteristics but has an improved retrieval error comparable to the ASAR GM sensor. The operationally available medium resolution soil moisture from Sentinel-1 with a well-characterized error is likely to yield benefits for modelling and monitoring of land surface-atmosphere fluxes, crop growth and water balance applications. (author) [de

7 CFR 51.3204 - Fairly firm.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Fairly firm. 51.3204 Section 51.3204 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Grades of Bermuda-Granex-Grano Type Onions Definitions § 51.3204 Fairly firm. Fairly firm...

A Skeptic's Bookshelf: Scientific Responses to Pseudoscience. An Annotated Bibliography.

Science.gov (United States)

Fraknoi, Andrew

1984-01-01

Lists nontechnical books and articles on the various claims of "paranormal" events. Includes general references and materials on: astrology; unidentified flying objects (UFO's); ancient astronauts; lunacy and the moon; Velikovsky and "Worlds in Collision"; the Bermuda triangle; Sirius B and the Dogon; the Tunguska event; creationism; and…

Wild beans (Phaseolus L.) of North America

Science.gov (United States)

The wild relatives of the five domesticated species of bean (Phaseolus L.) are widely distributed across the tropics and subtropics of the New World, with taxa extending to the Canadian border, the Caribbean islands and Bermuda, the Galapagos Islands, and south to Argentina. Mesoamerica holds the la...

Stygofauna of the Canary Islands, 9. The amphipod genus Pseudoniphargus (Crustacea) in the Canary Islands

NARCIS (Netherlands)

Stock, Jan H.

1988-01-01

Pseudoniphargus was known from inland stygohabitats in the Iberian peninsula, the Azores, Madeira, N.W. Africa, and Bermuda, but not from the Canary Islands. Systematic sampling in six of the seven larger islands of the latter archipelago has revealed the presence of the genus in Tenerife (4

Kuus uut Eesti filmi korraga ekraanil / Tarmo Teder

Index Scriptorium Estoniae

Teder, Tarmo

1998-01-01

21. mail esilinastuvad kinos Sõprus 'Just märried', rezh. Peep Pedmanson; 'Päevavalgus', rezh. Mait Laas; 'Primavera', rezh. Riho Unt ja Hardi Volmer; 'Vares ja hiired', rezh. Priit Tender ja Mikk Rand; 'Bermuda', rezh. Ülo Pikkov; 'Tom ja Fluffy', rezh. Janno Põldma ja Heiki Ernits

Swimbladder Allometry of Selected Midwater Fish Species

Science.gov (United States)

1976-01-05

Gibbs, R. II., Jr., 1971. "Notes on Fishes of the Genus Eustomias ( Stomiatoidei , Melanstomiatidae) in Bermuda Waters, With the Description of...N00140-70-C-0307, Smithsonian Institution. Goodyear, R. H. and R. H. Gibbs, Jr., 1970. "Systematics and Zoogeography of Stomiatoid Fishes of the

More winged females of the cricket Gryllodes supplicans (Walker ...

African Journals Online (AJOL)

The cosmotropical cricket Gryllodes supplicans occurs in two forms, a common micropterous form and a rare micropterous form. The unusual macropterous form occurs naturally in Sri Lanka and Bermuda, but has also been produced by laboratory manipulation of environmental conditions. This article is a preliminary report ...

Isolation and characterization of eight polymorphic microsatellites for the spotted spiny lobster, Panulirus guttatus

Directory of Open Access Journals (Sweden)

Nathan Truelove

2016-01-01

Full Text Available Microsatellite sequences were isolated from enriched genomic libraries of the spotted spiny lobster, Panulirus guttatus using 454 pyrosequencing. Twenty-nine previously developed polymerase chain reaction primer pairs of Panulirus argus microsatellite loci were also tested for cross-species amplification in Panulirus guttatus. In total, eight consistently amplifying, and polymorphic loci were characterized for 57 individuals collected in the Florida Keys and Bermuda. The number of alleles per locus ranged from 8 to 20 and observed heterozygosities ranged from 0.409 to 0.958. Significant deviations from Hardy–Weinberg equilibrium were found in one locus from Florida and three loci from Bermuda. Quality control testing indicated that all loci were easy to score, highly polymorphic and showed no evidence of linkage disequilibrium. Null alleles were detected in three loci with moderate frequencies ranging from (20% to 22%. These eight microsatellites provide novel molecular markers for future conservation genetics research of P. guttatus.

Observations and Numerical Modelling of Strong Meteotsunami of 13 June 2013 on the East Coast of the USA

Science.gov (United States)

Fine, I.; Sepic, J.; Rabinovich, A.; Thomson, R.

2014-12-01

A strong "derecho" (rapidly moving lines of convectively induced intense thunderstorms) was generated over the Midwestern United States on 12-13 June 2013 and propagated across the Appalachian Mountains to the Atlantic Ocean. Three hours after the derecho crossed the Atlantic coast, a ~2-m high meteotsunami wave was reported to have hit the New Jersey coast. Significant tsunami-like oscillations, with wave heights of ~0.6 m, were also recorded by a number of tide-gauges located along the eastern seaboard from Nova Scotia to South Carolina, at Bermuda, and by open-ocean DART 44402. These observations triggered the tsunami-alert mode of the DART station. Intense air pressure disturbances (with pressure change of 3-6 hPa in 20 min) and strong winds were observed at a number of National Oceanic and Atmospheric Administration (NOAA) and Automated Surface Observing System (ASOS) stations to be propagating simultaneously with the derecho system, indicating that the pressure disturbances were the primary cause for the sea level oscillations in Chesapeake and Delaware bays. The air pressure disturbance continued to propagate seaward over the continental shelf, thereby generating long waves via Proudman resonance at those areas of the shelf where the propagation speed of the air pressure disturbance matched the long wave speed. Upon reaching the shelf break, the long-waves were partly transmitted (reaching Bermuda 5 hours later) and partly reflected (returning to the east coast of the US and Canada 3 to 6 hours later). A numerical barotropic ocean model forced with idealized air pressure and wind fields was used successfully to simulate the event. The meteotsunami arrival times and maximum wave heights obtained from the model closely match the measured values and confirm initial assumptions regarding the partitioning between transmitted and reflected meteotsunami waves.

Impacts of large-scale circulation on urban ambient concentrations of gaseous elemental mercury in New York, USA

Directory of Open Access Journals (Sweden)

H. Mao

2017-09-01

Full Text Available The impact of large-scale circulation on urban gaseous elemental mercury (GEM was investigated through analysis of 2008–2015 measurement data from an urban site in New York City (NYC, New York, USA. Distinct annual cycles were observed in 2009–2010 with mixing ratios in warm seasons (i.e., spring–summer 10–20 ppqv ( ∼  10–25 % higher than in cool seasons (i.e., fall–winter. This annual cycle was disrupted in 2011 by an anomalously strong influence of the US East Coast trough in that warm season and was reproduced in 2014 associated with a particularly strong Bermuda High. The US East Coast trough axis index (TAI and intensity index (TII were used to characterize the effect of the US East Coast trough on NYC GEM, especially in winter and summer. The intensity and position of the Bermuda High appeared to have a significant impact on GEM in warm seasons. Regional influence on NYC GEM was supported by the GEM–carbon monoxide (CO correlation with r of 0.17–0.69 (p ∼  0 in most seasons. Simulated regional and local anthropogenic contributions to wintertime NYC anthropogenically induced GEM concentrations were averaged at  ∼  75 % and 25 %, with interannual variation ranging over 67 %–83 % and 17 %–33 %, respectively. Results from this study suggest the possibility that the increasingly strong Bermuda High over the past decades could dominate over anthropogenic mercury emission control in affecting ambient concentrations of mercury via regional buildup and possibly enhancing natural and legacy emissions.

Rhizophora mangle L

Science.gov (United States)

James A. Allen

2002-01-01

The genus Rhizophora comprises six to eight species and three or four hybrids (Duke 1992, Tomlinson 1986). All members of this pantropical genus are considered true mangroves and are limited in distribution to the intertidal zone. The native range of R. mangle includes the coast of central and southern Florida, Bermuda and most...

Risk and Protective Factors Associated with Cyberbullying: Are Relationships or Rules More Protective?

Science.gov (United States)

Davis, Katie; Koepke, Lucas

2016-01-01

The aim of this paper is to investigate which adolescents are most and least at risk of experiencing online victimization. The results of logistic regression analyses using data on 2079 adolescents attending secondary school in Bermuda indicate that not all forms of media use place adolescents at risk of experiencing cyberbullying. Adolescents who…

77 FR 51763 - Endangered and Threatened Wildlife; 90-Day Finding on a Petition To List the Queen Conch as...

Science.gov (United States)

2012-08-27

... mature (16 U.S.C. 1532(16)). A joint NOAA-U.S. Fish and Wildlife Service (USFWS) policy clarifies the..., delisting, and reclassifying a species under the ESA (``DPS Policy''; 61 FR 4722; February 7, 1996). A... Bermuda, Cuba, Colombia, Florida, Mexico, the Netherlands Antilles, the U.S. Virgin Islands, and Venezuela...

Surface Water & Surface Drainage

Data.gov (United States)

Earth Data Analysis Center, University of New Mexico — This data set contains boundaries for all surface water and surface drainage for the state of New Mexico. It is in a vector digital data structure digitized from a...

Modification of rubber surface by UV surface grafting

International Nuclear Information System (INIS)

Shanmugharaj, A.M.; Kim, Jin Kuk; Ryu, Sung Hun

2006-01-01

Rubber surface is subjected to ultraviolet radiation (UV) in the presence of allylamine and radiation sensitizer benzophenone (BP). Fourier transform infrared spectral studies reveal the presence of allylamine on the surface. The presence of irregular needle shapes on the surface as observed in scanning electron micrographs also confirms the polymerized allylamine on the surface. Allylamine coatings have been further confirmed from atomic force microscopy (AFM) analysis. Thermogravimetric analysis (TGA) reveals that allylamine coating on the rubber surface lowers the thermal degradation rate. The contact angle between the water and rubber surface decreases for the modified rubber surface confirming the surface modification due to UV surface grafting

Surface Topography Hinders Bacterial Surface Motility.

Science.gov (United States)

Chang, Yow-Ren; Weeks, Eric R; Ducker, William A

2018-03-21

We demonstrate that the surface motility of the bacterium, Pseudomonas aeruginosa, is hindered by a crystalline hemispherical topography with wavelength in the range of 2-8 μm. The motility was determined by the analysis of time-lapse microscopy images of cells in a flowing growth medium maintained at 37 °C. The net displacement of bacteria over 5 min is much lower on surfaces containing 2-8 μm hemispheres than on flat topography, but displacement on the 1 μm hemispheres is not lower. That is, there is a threshold between 1 and 2 μm for response to the topography. Cells on the 4 μm hemispheres were more likely to travel parallel to the local crystal axis than in other directions. Cells on the 8 μm topography were less likely to travel across the crowns of the hemispheres and were also more likely to make 30°-50° turns than on flat surfaces. These results show that surface topography can act as a significant barrier to surface motility and may therefore hinder surface exploration by bacteria. Because surface exploration can be a part of the process whereby bacteria form colonies and seek nutrients, these results help to elucidate the mechanism by which surface topography hinders biofilm formation.

Theory of quasiparticle surface states in semiconductor surfaces

International Nuclear Information System (INIS)

Hybertsen, M.S.; Louie, S.G.

1988-01-01

A first-principles theory of the quasiparticle surface-state energies on semiconductor surfaces is developed. The surface properties are calculated using a repeated-slab geometry. Many-body effects due to the electron-electron interaction are represented by the electron self-energy operator including the full surface Green's function and local fields and dynamical screening effects in the Coulomb interaction. Calculated surface-state energies for the prototypical Si(111):As and Ge(111):As surfaces are presented. The calculated energies and dispersions for the occupied surface states (resonances) are in excellent agreement with recent angle-resolved photoemission data. Predictions are made for the position of empty surface states on both surfaces which may be experimentally accessible. The resulting surface state gap at Gamma-bar for Si(111):As agrees with recent scanning-tunneling-spectroscopy measurements. Comparison of the present results to eigenvalues from the local-density-functional calculation reveals substantial corrections for the gaps between empty and occupied surface states. This correction is found to depend on the character of the surface states involved

Molecular evolution of the polyamine oxidase gene family in Metazoa

Directory of Open Access Journals (Sweden)

Polticelli Fabio

2012-06-01

Full Text Available Abstract Background Polyamine oxidase enzymes catalyze the oxidation of polyamines and acetylpolyamines. Since polyamines are basic regulators of cell growth and proliferation, their homeostasis is crucial for cell life. Members of the polyamine oxidase gene family have been identified in a wide variety of animals, including vertebrates, arthropodes, nematodes, placozoa, as well as in plants and fungi. Polyamine oxidases (PAOs from yeast can oxidize spermine, N1-acetylspermine, and N1-acetylspermidine, however, in vertebrates two different enzymes, namely spermine oxidase (SMO and acetylpolyamine oxidase (APAO, specifically catalyze the oxidation of spermine, and N1-acetylspermine/N1-acetylspermidine, respectively. Little is known about the molecular evolutionary history of these enzymes. However, since the yeast PAO is able to catalyze the oxidation of both acetylated and non acetylated polyamines, and in vertebrates these functions are addressed by two specialized polyamine oxidase subfamilies (APAO and SMO, it can be hypothesized an ancestral reference for the former enzyme from which the latter would have been derived. Results We analysed 36 SMO, 26 APAO, and 14 PAO homologue protein sequences from 54 taxa including various vertebrates and invertebrates. The analysis of the full-length sequences and the principal domains of vertebrate and invertebrate PAOs yielded consensus primary protein sequences for vertebrate SMOs and APAOs, and invertebrate PAOs. This analysis, coupled to molecular modeling techniques, also unveiled sequence regions that confer specific structural and functional properties, including substrate specificity, by the different PAO subfamilies. Molecular phylogenetic trees revealed a basal position of all the invertebrates PAO enzymes relative to vertebrate SMOs and APAOs. PAOs from insects constitute a monophyletic clade. Two PAO variants sampled in the amphioxus are basal to the dichotomy between two well supported

Development of new techniques of using irradiation in the genetic improvement of warm season grasses and an assessment of the genetic and cytogenetic effects. Annual report, August 1, 1976--October 31, 1977

International Nuclear Information System (INIS)

Burton, G.W.; Hanna, W.W.

1977-08-01

New techniques of using irradiation in the genetic improvement of several warm season grasses are described. The economic value of radiation induced plant mutants and the genetic and cytogenetic effects of these treatments are discussed. Alterations in protein quality in pearl millet grain and improved varieties of Bermuda grass following radiation treatment are reported

Multifilm kui tõsine asi / Marko Mägi

Index Scriptorium Estoniae

Mägi, Marko

1998-01-01

Esilinastus 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Eesti animafilme igale maitsele / Sulev Teinemaa

Index Scriptorium Estoniae

Teinemaa, Sulev, 1947-

1998-01-01

Esilinastus 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Aimdusi tsivilisatsioonist / Tarmo Teder

Index Scriptorium Estoniae

Teder, Tarmo, 1958-

1998-01-01

Esilinastus 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Animaalselt ja humaanselt / Karlo Funk

Index Scriptorium Estoniae

Funk, Karlo, 1971-

1998-01-01

Esilinastus 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Comportamiento de céspedes de Cynodon dactylon (L. Pers. en Paraná, Entre Ríos, Argentina

Directory of Open Access Journals (Sweden)

María I. Laurencena

2009-01-01

Full Text Available En zonas subtropicales o templadas cálidas las gramíneas estivales constituyen la base del césped pero presentan dormancia durante el invierno. Por ello es importante el conocimiento de céspedes con períodos de emergencia a implantación y vegetativo inactivo cortos, de textura fina, buen color, buen comportamiento sanitario y respuesta a fertilización. El objetivo de este trabajo fue evaluar el comportamiento en el Departamento Paraná (Entre Ríos, Argentina de céspedes de Cynodon dactylon (bermuda comercializados para uso ornamental y deportivo. Se evaluaron cobertura, textura, color, dormancia, rebrote y respuesta a fertilización en un ensayo en dos tratamientos: con y sin drenaje, con cuatro repeticiones. El diseño experimental fue de parcelas apareadas y las mediciones se realizaron desde marzo de 2005 a noviembre de 2006. No hubo diferencias entre las bermudas evaluadas y todas presentaron alta cobertura, textura fina, color verde medio, dormancia con bajas temperaturas y buena respuesta a la fertilización.

Crescimento de folhas do capim-bermuda tifton 85 submetido à adubação nitrogenada após o corte Leaf growth of tifton 85 bermudagrass submitted to nitrogen fertilization after cutting

Directory of Open Access Journals (Sweden)

Linda Monica Premazzi

2011-03-01

Full Text Available Com o objetivo de avaliar a influência de doses e épocas de aplicação de nitrogênio após o corte no fator de correção de área foliar, na taxa de alongamento de folhas e no comprimento e área da lâmina foliar do capim-bermuda tifton 85 (Cynodon spp foram conduzidos dois experimentos em casa de vegetação. Ambos os experimentos foram estabelecidos em vasos com capacidade para 7 kg de terra, com solo classificado como Neossolo Quartzarênico Órtico típico, em esquema fatorial 4 × 2, para avaliação de quatro doses de nitrogênio (0, 80, 160 e 240 mg kg-1 de solo e duas épocas de aplicação (imediatamente após o corte e sete dias após o corte das plantas. O delineamento experimental foi em blocos completos ao acaso, com quatro repetições. Com o fornecimento de nitrogênio, observou-se diminuição no fator de correção de área foliar. O nitrogênio proporciona variação positiva no comprimento foliar, na área da lâmina foliar e na taxa de alongamento da folha, variações que ocorreram em maior grandeza entre a não-aplicação de nitrogênio e a dose de 80 mg kg-1 de solo.With the objective of evaluating the influence of nitrogen rates and application time after cutting on correction factor for leaf area, on leaf elongation rate and on blade leaf length and area of tifton 85 bermudagrass (Cynodon spp, two experiments were carried out in a greenhouse. Both experiments were established in pots with capacity for 7 kg of soil classified as Entisol, in a 4 × 2 factorial scheme, for evaluation of four nitrogen rates (0, 80, 160 and 240 mg kg-1 of soil and two application times (immediately after cutting and seven days after cutting of the plants. It was used a complete randomized block design, with four replications. As nitrogen was supplied, it was observed a decrease in the correction factor for leaf area. There is a predominance of positive effects of nitrogen on leaf length, on leaf blade area and on leaf elongation rate

PREFACE: Vibrations at surfaces Vibrations at surfaces

Science.gov (United States)

Rahman, Talat S.

2011-12-01

This special issue is dedicated to the phenomenon of vibrations at surfaces—a topic that was indispensible a couple of decades ago, since it was one of the few phenomena capable of revealing the nature of binding at solid surfaces. For clean surfaces, the frequencies of modes with characteristic displacement patterns revealed how surface geometry, as well as the nature of binding between atoms in the surface layers, could be different from that in the bulk solid. Dispersion of the surface phonons provided further measures of interatomic interactions. For chemisorbed molecules on surfaces, frequencies and dispersion of the vibrational modes were also critical for determining adsorption sites. In other words, vibrations at surfaces served as a reliable means of extracting information about surface structure, chemisorption and overlayer formation. Experimental techniques, such as electron energy loss spectroscopy and helium-atom-surface scattering, coupled with infra-red spectroscopy, were continually refined and their resolutions enhanced to capture subtleties in the dynamics of atoms and molecules at surfaces. Theoretical methods, whether based on empirical and semi-empirical interatomic potential or on ab initio electronic structure calculations, helped decipher experimental observations and provide deeper insights into the nature of the bond between atoms and molecules in regions of reduced symmetry, as encountered on solid surfaces. Vibrations at surfaces were thus an integral part of the set of phenomena that characterized surface science. Dedicated workshops and conferences were held to explore the variety of interesting and puzzling features revealed in experimental and theoretical investigations of surface vibrational modes and their dispersion. One such conference, Vibrations at Surfaces, first organized by Harald Ibach in Juelich in 1980, continues to this day. The 13th International Conference on Vibrations at Surfaces was held at the University of

Induced surface stress at crystal surfaces

International Nuclear Information System (INIS)

Dahmen, K.

2002-05-01

Changes of the surfaces stress Δτ (s) can be studied by observing the bending of thin crystalline plates. With this cantilever method one can gain the induced change of surface stress Δτ (s) from the bending of plates with the help of elasticity theory. For elastic isotropic substrates the relevant relations are known. Here the relations are generalized to elastic anisotropic crystals with a C 2v - Symmetry. The equilibrium shapes of crystalline plates oriented along the (100)-, (110)-, or (111)-direction which are clamped along one edge are calculated with a numeric method under the load of a homogeneous but pure isotropic or anisotropic surface stress. The results can be displayed with the dimensionality, so that the effect of clamping can be described in a systematic way. With these tabulated values one can evaluate cantilever experiments exactly. These results are generalized to cantilever methods for determining magnetoelastic constants. It is shown which magnetoelastic constants are measured in domains of thin films with ordered structures. The eigenshape and the eigenfrequency of plates constraint through a clamping at one side are calculated. These results give a deeper understanding of the elastic anisotropy. The induced surface stress of oxygen on the (110)-surface of molybdenum is measured along the principle directions Δτ [001] and Δτ [ anti 110] . The anisotropy of the surface stress is found for the p(2 x 2)-reconstruction. Lithium induces a tensile surface stress on the Molybdenum (110)-surface up to a coverage of Θ = 0, 3 monolayer. For a higher coverage the induced stress drops and reaches a level of less than -1, 2 N/m at one monolayer. It is shown, that cobalt induces a linear increasing stress with respect to the coverage on the (100)-surface of copper with a value of 2, 4GPa. The copper (100)-surface is bombarded with accelerated ions in the range between 800-2200 eV. The resulting induced compressive stress (Δτ (s) < 0) of the order

Surface-Activated Coupling Reactions Confined on a Surface.

Science.gov (United States)

Dong, Lei; Liu, Pei Nian; Lin, Nian

2015-10-20

Chemical reactions may take place in a pure phase of gas or liquid or at the interface of two phases (gas-solid or liquid-solid). Recently, the emerging field of "surface-confined coupling reactions" has attracted intensive attention. In this process, reactants, intermediates, and products of a coupling reaction are adsorbed on a solid-vacuum or a solid-liquid interface. The solid surface restricts all reaction steps on the interface, in other words, the reaction takes place within a lower-dimensional, for example, two-dimensional, space. Surface atoms that are fixed in the surface and adatoms that move on the surface often activate the surface-confined coupling reactions. The synergy of surface morphology and activity allow some reactions that are inefficient or prohibited in the gas or liquid phase to proceed efficiently when the reactions are confined on a surface. Over the past decade, dozens of well-known "textbook" coupling reactions have been shown to proceed as surface-confined coupling reactions. In most cases, the surface-confined coupling reactions were discovered by trial and error, and the reaction pathways are largely unknown. It is thus highly desirable to unravel the mechanisms, mechanisms of surface activation in particular, of the surface-confined coupling reactions. Because the reactions take place on surfaces, advanced surface science techniques can be applied to study the surface-confined coupling reactions. Among them, scanning tunneling microscopy (STM) and X-ray photoelectron spectroscopy (XPS) are the two most extensively used experimental tools. The former resolves submolecular structures of individual reactants, intermediates, and products in real space, while the latter monitors the chemical states during the reactions in real time. Combination of the two methods provides unprecedented spatial and temporal information on the reaction pathways. The experimental findings are complemented by theoretical modeling. In particular, density

Coupling between bulk ordering and surface segregation: from alloy surfaces to surface alloys

International Nuclear Information System (INIS)

Gallis, Coralie

1997-01-01

-The knowledge of the alloy surfaces is of prime interest to understand their catalytic properties. On the one hand, the determination of the stability of the surface alloys depends very strongly on the behaviours of the A c B 1-c alloy surfaces. On the other hand, the knowledge of the kinetics of the formation-dissolution of surface alloys can allow to understand the equilibrium segregation isotherm. We have then studied the relation between the equilibrium surface segregation in an alloy A c B 1-c and the kinetics of dissolution of a few metallic layers of A/B and the inverse deposit. We have used an energetic model derived from the electronic structure (T.I.B.M.) allowing us to study the surface segregation both in the disordered state and in the ordered one. The kinetics of dissolution were studied using the kinetic version of this model (K.T.I.B.M.) consistent with the equilibrium model. To illustrate our study, we have chosen the Cu-Pd system, a model for the formation of surface alloys and for which a great number of studies, both experimental and theoretical, are in progress. We then have shown for the (111) surface of this system that the surface alloys obtained during the dissolution are related to the alloy surfaces observed for the equilibrium segregation. The Cu-Pd system is characteristic of systems which have a weak segregation energy. Then, we have performed an equivalent study for a system with a strong segregation energy. Our choice was directly put on the Pt-Sn system. The surface behaviour, both in equilibrium and during the kinetics of dissolution, is very different from the Cu-Pd case. In particular, we have found pure 2-D surface alloys. Finally, a quenched molecular dynamics study has allowed us to determine the relative stability of various possible surface superstructures. (author) [fr

Three Essays on Terrorism, its Relationship with Natural Disasters, and its Effect on Female Labor Force Participation

Science.gov (United States)

2011-09-01

3 Belize M Yes 20 Mali L Yes 11 Bermuda H No 20 Mauritania L Yes 18 Bhutan L Yes 3 Mexico H Yes 15 Bolivia M Yes 7 Moldova Rep L Yes 19 Bosnia...of protesters hurling rocks and Molotov cocktails at treatment centers out of fear that foreign aid workers had been the source of the cholera

Friendship 2.0: Adolescents' Experiences of Belonging and Self-Disclosure Online

Science.gov (United States)

Davis, Katie

2012-01-01

This study explores the role that digital media technologies play in adolescents' experiences of friendship and identity. The author draws on findings from in-depth interviews with 32 adolescents (15 girls, 17 boys) ages 13-18 (M = 15.5 years) attending one of seven secondary schools in Bermuda. The adolescents were asked to describe the nature of…

Report to the U.S. Congress on the National Oceanographic Partnership Program

Science.gov (United States)

1999-01-01

security, advancing economic development, protecting quality of life, and strengthening science education and communication through improved knowledge of... nitrate analyzers, and spectral optical sensors) will be tested on testbed moorings near Bermuda and Monterey Bay. The newly developed systems...design, systems integration, interdisciplinary multiscale data assimilation and interactive processes. real-time demonstration of concept and analysis of

Animatsiooni vastu ei saa ükski / Mikk Rand

Index Scriptorium Estoniae

Rand, Mikk, 1970-

1998-01-01

21.5. esilinastuvad kinos "Sõprus" 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Esilinastuvad eesti animafilmid

Index Scriptorium Estoniae

1998-01-01

21.5. esilinastuvad kinos "Sõprus" 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Kuus uut Eesti filmi korraga ekraanil / Tarmo Teder

Index Scriptorium Estoniae

Teder, Tarmo, 1958-

1998-01-01

21.5. esilinastuvad kinos "Sõprus" 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer

Surface impedance and optimum surface resistance of a superconductor with an imperfect surface

Science.gov (United States)

Gurevich, Alex; Kubo, Takayuki

2017-11-01

We calculate a low-frequency surface impedance of a dirty, s -wave superconductor with an imperfect surface incorporating either a thin layer with a reduced pairing constant or a thin, proximity-coupled normal layer. Such structures model realistic surfaces of superconducting materials which can contain oxide layers, absorbed impurities, or nonstoichiometric composition. We solved the Usadel equations self-consistently and obtained spatial distributions of the order parameter and the quasiparticle density of states which then were used to calculate a low-frequency surface resistance Rs(T ) and the magnetic penetration depth λ (T ) as functions of temperature in the limit of local London electrodynamics. It is shown that the imperfect surface in a single-band s -wave superconductor results in a nonexponential temperature dependence of Z (T ) at T ≪Tc which can mimic the behavior of multiband or d -wave superconductors. The imperfect surface and the broadening of the gap peaks in the quasiparticle density of states N (ɛ ) in the bulk give rise to a weakly temperature-dependent residual surface resistance. We show that the surface resistance can be optimized and even reduced below its value for an ideal surface by engineering N (ɛ ) at the surface using pair-breaking mechanisms, particularly by incorporating a small density of magnetic impurities or by tuning the thickness and conductivity of the normal layer and its contact resistance. The results of this work address the limit of Rs in superconductors at T ≪Tc , and the ways of engineering the optimal density of states by surface nanostructuring and impurities to reduce losses in superconducting microresonators, thin-film strip lines, and radio-frequency cavities for particle accelerators.

On-surface synthesis on a bulk insulator surface

Science.gov (United States)

Richter, Antje; Floris, Andrea; Bechstein, Ralf; Kantorovich, Lev; Kühnle, Angelika

2018-04-01

On-surface synthesis has rapidly emerged as a most promising approach to prepare functional molecular structures directly on a support surface. Compared to solution synthesis, performing chemical reactions on a surface offers several exciting new options: due to the absence of a solvent, reactions can be envisioned that are otherwise not feasible due to the insolubility of the reaction product. Perhaps even more important, the confinement to a two-dimensional surface might enable reaction pathways that are not accessible otherwise. Consequently, on-surface synthesis has attracted great attention in the last decade, with an impressive number of classical reactions transferred to a surface as well as new reactions demonstrated that have no classical analogue. So far, the majority of the work has been carried out on conducting surfaces. However, when aiming for electronic decoupling of the resulting structures, e.g. for the use in future molecular electronic devices, non-conducting surfaces are highly desired. Here, we review the current status of on-surface reactions demonstrated on the (10.4) surface of the bulk insulator calcite. Besides thermally induced C-C coupling of halogen-substituted aryls, photochemically induced [2  +  2] cycloaddition has been proven possible on this surface. Moreover, experimental evidence exists for coupling of terminal alkynes as well as diacetylene polymerization. While imaging of the resulting structures with dynamic atomic force microscopy provides a direct means of reaction verification, the detailed reaction pathway often remains unclear. Especially in cases where the presence of metal atoms is known to catalyze the corresponding solution chemistry reaction (e.g. in the case of the Ullmann reaction), disclosing the precise reaction pathway is of importance to understand and generalize on-surface reactivity on a bulk insulator surface. To this end, density-functional theory calculations have proven to provide atomic

Surface Energy and Setting Process of Contacting Surfaces

Directory of Open Access Journals (Sweden)

M. V. Musokhranov

2014-01-01

Full Text Available The paper deals with a challenge in terms of ensuring an accuracy of the relative position of the conjugated surfaces that is to determine a coefficient of friction. To solve it, there is a proposal to use the surface energy, as a tool that influences the contacting parts nature. Presently, energy of the surface layers at best is only stated, but not used in practice.Analysis of the conditions of interaction between two contacting surfaces, such as seizing and setting cannot be explained only from the position of the roughness parameters. It is found that these phenomena are explained by the appearing gripe (setting bridges, which result from the energy of interaction between two or more adjacent surfaces. The emerging phenomenon such as micro welding, i.e. occurring bonds, is caused by the overflow of energy, according to the theory of physics, from the surface with a high level of energy to the surface with the smaller one to balance the system as a whole.The paper shows that through the use of process, controlling the depth of the surface layer and creating a certain structure, the energy level of the material as a whole can be specified. And this will allow us to provide the necessary performance and mechanical properties. It means to create as many gripe bridges as possible to ensure continuous positioning i.e. a fixed connection of the contacting surfaces.It was determined that to increase a value of the friction coefficient, the physical and mechanical properties of the surface layer of the parts material must be taken into account, namely, in the part body accumulate the energy to be consumed for forming the surface.The paper gives recommendations for including the parts of the surface energy in the qualitative indicators of characteristics. This will make a technologist, when routing a process, to choose such operations and modes to provide the designer-specified parameters not only of the accuracy and surface finish, but also of the

Characterisation of surface roughness for ultra-precision freeform surfaces

International Nuclear Information System (INIS)

Li Huifen; Cheung, C F; Lee, W B; To, S; Jiang, X Q

2005-01-01

Ultra-precision freeform surfaces are widely used in many advanced optics applications which demand for having surface roughness down to nanometer range. Although a lot of research work has been reported on the study of surface generation, reconstruction and surface characterization such as MOTIF and fractal analysis, most of them are focused on axial symmetric surfaces such as aspheric surfaces. Relative little research work has been found in the characterization of surface roughness in ultra-precision freeform surfaces. In this paper, a novel Robust Gaussian Filtering (RGF) method is proposed for the characterisation of surface roughness for ultra-precision freeform surfaces with known mathematic model or a cloud of discrete points. A series of computer simulation and measurement experiments were conducted to verify the capability of the proposed method. The experimental results were found to agree well with the theoretical results

Hydrological and Dynamical Characteristics of Summertime Droughts over U.S. Great Plains.

Science.gov (United States)

Chang, Fong-Chiau; Smith, Eric A.

2001-05-01

strong anticyclone over central North America.On a regional scale, midtropospheric westerly winds are weakened (or become easterly) south of a thermal heat low centered in South Dakota during drought episodes because of the north-south temperature reversal perturbation. The associated westward displaced Bermuda high leads to enhanced low-level warm flow into the Dakotas, thus helping to maintain the reversal in the meridional temperature gradient and the concomitant thermal wind reversal. Enhanced moisture transport from the Gulf of California into the western plains (part of the Great Basin monsoon process) results from the large-scale perturbation pressure pattern. Middle-upper level convergence maintains the water vapor strip east of the Rocky Mountains, while the Mississippi valley undergoes moisture cutoff from both this process and the westward shift in the Bermuda high. The strip of maximum PW then undergoes enhanced solar and infrared absorption that feeds back on the thermal heat low. Surface air temperatures warm while sinking motion balances middle-upper level radiative cooling around the Kansas City area. This is the dynamical coupling that leads to reduced surface relative humidities. The centers of high surface air temperature and deficit rainfall are dynamically consistent with patterns in geopotential heights, vertical velocities, and water vapor amounts.

A systematic first-principles study of surface energies, surface relaxation and Friedel oscillation of magnesium surfaces

International Nuclear Information System (INIS)

Tang, Jia-Jun; Yang, Xiao-Bao; Zhao, Yu-Jun; OuYang, LiuZhang; Zhu, Min

2014-01-01

We systematically study the surface energies and surface relaxations of various low-index and high-index Mg surfaces. It is found that low-index surfaces are not necessarily stable as Mg(1 0  1-bar  0) is the most unstable surface in the series of Mg(1 0  1-bar  n) (n = 0–9). A surface-energy predicting model based on the bond cutting is proposed to explain the relative surface stabilities. The local relaxations of the low-index surfaces could be explained by the Friedel oscillation. For the high-index surfaces, the combination of charge smoothing effect and dramatic charge depletion influences the relaxations, which show a big difference from the low-index ones. Our findings provide theoretical data for considerable insights into the surface energies of hexagonal close-packed metals. (paper)

Evaluation of Surface Fatigue Strength Based on Surface Temperature

Science.gov (United States)

Deng, Gang; Nakanishi, Tsutomu

Surface temperature is considered to be an integrated index that is dependent on not only the load and the dimensions at the contact point but also the sliding velocity, rolling velocity, surface roughness, and lubrication conditions. Therefore, the surface durability of rollers and gears can be evaluated more exactly and simply by the use of surface temperature rather than Hertzian stress. In this research, surface temperatures of rollers under different rolling and sliding conditions are measured using a thermocouple. The effects of load P, mean velocity Vm and sliding velocity Vs on surface temperature are clarified. An experimental formula, which expresses the linear relationship between surface temperature and the P0.86Vs1.31Vm-0.83 value, is used to determine surface temperature. By comparing calculated and measured temperature on the tooth surface of a gear, this formula is confirmed to be applicable for gear tooth surface temperature calculation.

Surface phonons and elastic surface waves

Science.gov (United States)

Büscher, H.; Klein-Heßling, W.; Ludwig, W.

Theoretical investigations on the dynamics of the (001), (110) and (111) surfaces of some cubic metals (Ag, Cu, Ni) will be reviewed. Both, lattice dynamical and continuum theoretical results are obtained via a Green's function formalism. The main attitude of this paper is the comparison of our results with experiments and with results obtained via slab-calculations. The calculation of elastic surface waves has been performed using a modified surface-green-function-matching method. We have used two different approaches of calculation the bulk Green's function (a) using the spectral representation and (b) a method, what works on residues. The investigations are carried out using shortrange phenomenological potentials. The atomic force constants in the first surface layers are modified to describe surface phonon anomalies, observed by experiments. In the case of Ag (100) and Ag(110) we conclude that the detection of odd symmetry shear modes by Erskine et al. [1 a, b] was not very accurate.

Surface phonons and elastic surface waves

International Nuclear Information System (INIS)

Buescher, H.; Klein-Hessling, W.; Ludwig, W.

1993-01-01

Theoretical investigations on the dynamics of the (001), (110) and (111) surfaces of some cubic metals (Ag, Cu, Ni) will be reviewed. Both, lattice dynamical and continuum theoretical results are obtained via a Green's function formalism. The main attitude of this paper is the comparison of our results with experiments and with results obtained via slab-calculations. The calculation of elastic surface waves has been performed using a modified surface-green-function-matching method. We have used two different approaches of calculation the bulk Green's function (a) using the spectral representation and (b) a method, what works on residues. The investigations are carried out using shortrange phenomenological potentials. The atomic force constants in the first surface layers are modified to describe surface phonon anomalies, observed by experiments. In the case of Ag(100) and Ag(110) we conclude that the detection of odd symmetry shear modes by Erskine et al. was not very accurate. (orig.)

Evaporation rates and surface profiles on heterogeneous surfaces with mass transfer and surface reaction

Energy Technology Data Exchange (ETDEWEB)

Flytzani-Stephanopoulos, M; Schmidt, L D

1979-01-01

Simple models incorporating surface reaction and diffusion of volatile products through a boundary layer are developed to calculate effective rates of evaporation and local surface profiles on surfaces having active and inactive regions. The coupling between surface heterogeneities with respect to a particular reaction and external mass transfer may provide a mechanism for the surface rearrangement and metal loss encountered in several catalytic systems of practical interest. Calculated transport rates for the volatilization of platinum in oxidizing environments and the rearrangement of this metal during the ammonia oxidation reaction agree well with published experimental data.

Utilization of Ancillary Data Sets for Conceptual SMAP Mission Algorithm Development and Product Generation

Science.gov (United States)

O'Neill, P.; Podest, E.

2011-01-01

The planned Soil Moisture Active Passive (SMAP) mission is one of the first Earth observation satellites being developed by NASA in response to the National Research Council's Decadal Survey, Earth Science and Applications from Space: National Imperatives for the Next Decade and Beyond [1]. Scheduled to launch late in 2014, the proposed SMAP mission would provide high resolution and frequent revisit global mapping of soil moisture and freeze/thaw state, utilizing enhanced Radio Frequency Interference (RFI) mitigation approaches to collect new measurements of the hydrological condition of the Earth's surface. The SMAP instrument design incorporates an L-band radar (3 km) and an L band radiometer (40 km) sharing a single 6-meter rotating mesh antenna to provide measurements of soil moisture and landscape freeze/thaw state [2]. These observations would (1) improve our understanding of linkages between the Earth's water, energy, and carbon cycles, (2) benefit many application areas including numerical weather and climate prediction, flood and drought monitoring, agricultural productivity, human health, and national security, (3) help to address priority questions on climate change, and (4) potentially provide continuity with brightness temperature and soil moisture measurements from ESA's SMOS (Soil Moisture Ocean Salinity) and NASA's Aquarius missions. In the planned SMAP mission prelaunch time frame, baseline algorithms are being developed for generating (1) soil moisture products both from radiometer measurements on a 36 km grid and from combined radar/radiometer measurements on a 9 km grid, and (2) freeze/thaw products from radar measurements on a 3 km grid. These retrieval algorithms need a variety of global ancillary data, both static and dynamic, to run the retrieval models, constrain the retrievals, and provide flags for indicating retrieval quality. The choice of which ancillary dataset to use for a particular SMAP product would be based on a number of factors

Femtosecond laser-induced surface wettability modification of polystyrene surface

Science.gov (United States)

Wang, Bing; Wang, XinCai; Zheng, HongYu; Lam, YeeCheong

2016-12-01

In this paper, we demonstrated a simple method to create either a hydrophilic or hydrophobic surface. With femtosecond laser irradiation at different laser parameters, the water contact angle (WCA) on polystyrene's surface can be modified to either 12.7° or 156.2° from its original WCA of 88.2°. With properly spaced micro-pits created, the surface became hydrophilic probably due to the spread of the water droplets into the micro-pits. While with properly spaced micro-grooves created, the surface became rough and more hydrophobic. We investigated the effect of laser parameters on WCAs and analyzed the laser-treated surface roughness, profiles and chemical bonds by surface profilometer, scanning electron microscope (SEM) and X-ray photoelectron spectroscopy (XPS). For the laser-treated surface with low roughness, the polar (such as C—O, C=O, and O—C=O bonds) and non-polar (such as C—C or C—H bonds) groups were found to be responsible for the wettability changes. While for a rough surface, the surface roughness or the surface topography structure played a more significant role in the changes of the surface WCA. The mechanisms involved in the laser surface wettability modification process were discussed.

In-surface confinement of topological insulator nanowire surface states

International Nuclear Information System (INIS)

Chen, Fan W.; Jauregui, Luis A.; Tan, Yaohua; Manfra, Michael; Klimeck, Gerhard; Chen, Yong P.; Kubis, Tillmann

2015-01-01

The bandstructures of [110] and [001] Bi 2 Te 3 nanowires are solved with the atomistic 20 band tight binding functionality of NEMO5. The theoretical results reveal: The popular assumption that all topological insulator (TI) wire surfaces are equivalent is inappropriate. The Fermi velocity of chemically distinct wire surfaces differs significantly which creates an effective in-surface confinement potential. As a result, topological insulator surface states prefer specific surfaces. Therefore, experiments have to be designed carefully not to probe surfaces unfavorable to the surface states (low density of states) and thereby be insensitive to the TI-effects

In-surface confinement of topological insulator nanowire surface states

Energy Technology Data Exchange (ETDEWEB)

Chen, Fan W., E-mail: fanchen@purdue.edu [Department of Physics and Astronomy, Purdue, West Lafayette, Indiana 47907 (United States); Network for Computational Nanotechnology, Purdue, West Lafayette, Indiana 47907 (United States); Jauregui, Luis A. [School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States); Tan, Yaohua [Network for Computational Nanotechnology, Purdue, West Lafayette, Indiana 47907 (United States); School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Manfra, Michael [Department of Physics and Astronomy, Purdue, West Lafayette, Indiana 47907 (United States); School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States); School of Materials Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Klimeck, Gerhard [Network for Computational Nanotechnology, Purdue, West Lafayette, Indiana 47907 (United States); School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States); Chen, Yong P. [Department of Physics and Astronomy, Purdue, West Lafayette, Indiana 47907 (United States); School of Electrical and Computer Engineering, Purdue University, West Lafayette, Indiana 47907 (United States); Birck Nanotechnology Center, Purdue University, West Lafayette, Indiana 47907 (United States); Kubis, Tillmann [Network for Computational Nanotechnology, Purdue, West Lafayette, Indiana 47907 (United States)

2015-09-21

The bandstructures of [110] and [001] Bi{sub 2}Te{sub 3} nanowires are solved with the atomistic 20 band tight binding functionality of NEMO5. The theoretical results reveal: The popular assumption that all topological insulator (TI) wire surfaces are equivalent is inappropriate. The Fermi velocity of chemically distinct wire surfaces differs significantly which creates an effective in-surface confinement potential. As a result, topological insulator surface states prefer specific surfaces. Therefore, experiments have to be designed carefully not to probe surfaces unfavorable to the surface states (low density of states) and thereby be insensitive to the TI-effects.

In-surface confinement of topological insulator nanowire surface states

Science.gov (United States)

Chen, Fan W.; Jauregui, Luis A.; Tan, Yaohua; Manfra, Michael; Klimeck, Gerhard; Chen, Yong P.; Kubis, Tillmann

2015-09-01

The bandstructures of [110] and [001] Bi2Te3 nanowires are solved with the atomistic 20 band tight binding functionality of NEMO5. The theoretical results reveal: The popular assumption that all topological insulator (TI) wire surfaces are equivalent is inappropriate. The Fermi velocity of chemically distinct wire surfaces differs significantly which creates an effective in-surface confinement potential. As a result, topological insulator surface states prefer specific surfaces. Therefore, experiments have to be designed carefully not to probe surfaces unfavorable to the surface states (low density of states) and thereby be insensitive to the TI-effects.

Superhydrophobic surfaces fabricated by surface modification of alumina particles

Science.gov (United States)

Richard, Edna; Aruna, S. T.; Basu, Bharathibai J.

2012-10-01

The fabrication of superhydrophobic surfaces has attracted intense interest because of their widespread potential applications in various industrial fields. Recently, some attempts have been carried out to prepare superhydrophobic surfaces using metal oxide nanoparticles. In the present work, superhydrophobic surfaces were fabricated with low surface energy material on alumina particles with different sizes. It was found that particle size of alumina is an important factor in achieving stable superhydrophobic surface. It was possible to obtain alumina surface with water contact angle (WCA) of 156° and a sliding angle of Superhydrophobicity of the modified alumina is attributed to the combined effect of the micro-nanostructure and low surface energy of fatty acid on the surface. The surface morphology of the alumina powder and coatings was determined by FESEM. The stability of the coatings was assessed by conducting water immersion test. Effect of heat treatment on WCA of the coating was also studied. The transition of alumina from hydrophilic to superhydrophobic state was explained using Wenzel and Cassie models. The method is shown to have potential application for creating superhydrophobic surface on cotton fabrics.

Minimal surfaces

CERN Document Server

Dierkes, Ulrich; Sauvigny, Friedrich; Jakob, Ruben; Kuster, Albrecht

2010-01-01

Minimal Surfaces is the first volume of a three volume treatise on minimal surfaces (Grundlehren Nr. 339-341). Each volume can be read and studied independently of the others. The central theme is boundary value problems for minimal surfaces. The treatise is a substantially revised and extended version of the monograph Minimal Surfaces I, II (Grundlehren Nr. 295 & 296). The first volume begins with an exposition of basic ideas of the theory of surfaces in three-dimensional Euclidean space, followed by an introduction of minimal surfaces as stationary points of area, or equivalently

Biosorption studies on shelled Moringa oleifera seeds for chromium removal using radiotracer

International Nuclear Information System (INIS)

Sharma, Parul; Srivastava, M.M.; Prakash, Satya; Srivastava, Shalini

2007-01-01

Shelled Moringa oleifera seeds (SMOS) have been explored as an indigenous, inexpensive and effective sorbent for chromium removal from water bodies. Sorption studies (batch) result into the standardization of optimum conditions for removal of 81.02% Cr (III) and 88.15% Cr (VI) pH 6.5 and 2.5 respectively. Percent sorption in each case was computed on the basis of chromium estimation using planar NaI (TI) detector, coupled to 4K MCA (Canberra Accuspec Card with PC AT 386). (author)

Genome sequence of the novel marine member of the Gammaproteobacteria strain HTCC5015.

KAUST Repository

Thrash, J Cameron; Stingl, Ulrich; Cho, Jang-Cheon; Ferriera, Steve; Johnson, Justin; Vergin, Kevin L; Giovannoni, Stephen J

2010-01-01

HTCC5015 is a novel, highly divergent marine member of the Gammaproteobacteria, currently without a cultured representative with greater than 89% 16S rRNA gene identity to itself. The organism was isolated from water collected from Hydrostation S south of Bermuda using high-throughput dilution-to-extinction culturing techniques. Here we present the genome sequence of the unique Gammaproteobacterium strain HTCC5015.

Genome sequence of the novel marine member of the Gammaproteobacteria strain HTCC5015.

KAUST Repository

Thrash, J Cameron

2010-07-01

HTCC5015 is a novel, highly divergent marine member of the Gammaproteobacteria, currently without a cultured representative with greater than 89% 16S rRNA gene identity to itself. The organism was isolated from water collected from Hydrostation S south of Bermuda using high-throughput dilution-to-extinction culturing techniques. Here we present the genome sequence of the unique Gammaproteobacterium strain HTCC5015.

Suur esilinastamine

Index Scriptorium Estoniae

1998-01-01

21.5. esilinastuvad kinos "Sõprus" 6 animafilmi : "Vares ja hiired", autorid Priit Tender ja Mikk Rand; "Just märried", autor Peep Pedmanson; "Päevavalgus", autor Mait Laas; "Tom ja Fluffy", režissöörid Janno Põldma ja Heiki Ernits; "Bermuda", autor Ülo Pikkov; "Primavera", režissöörid Riho Unt ja Hardi Volmer. Aut. : M.R

Incorporation of Passive Microwave Brightness Temperatures in the ECMWF Soil Moisture Analysis

Directory of Open Access Journals (Sweden)

Joaquín Muñoz-Sabater

2015-05-01

Full Text Available For more than a decade, the European Centre for Medium-Range Weather Forecasts (ECMWF has used in-situ observations of 2 m temperature and 2 m relative humidity to operationally constrain the temporal evolution of model soil moisture. These observations are not available everywhere and they are indirectly linked to the state of the surface, so under various circumstances, such as weak radiative forcing or strong advection, they cannot be used as a proxy for soil moisture reinitialization in numerical weather prediction. Recently, the ECMWF soil moisture analysis has been updated to be able to account for the information provided by microwave brightness temperatures from the Soil Moisture and Ocean Salinity (SMOS mission of the European Space Agency (ESA. This is the first time that ECMWF uses direct information of the soil emission from passive microwave data to globally adjust the estimation of soil moisture by a land-surface model. This paper presents a novel version of the ECMWF Extended Kalman Filter soil moisture analysis to account for remotely sensed passive microwave data. It also discusses the advantages of assimilating direct satellite radiances compared to current soil moisture products, with a view to an operational implementation. A simple assimilation case study at global scale highlights the potential benefits and obstacles of using this new type of information in a global coupled land-atmospheric model.

Periodontitis, diabetes mellitus, cardiovascular disease: A Bermuda Triangle

OpenAIRE

Teeuw, W.J.

2017-01-01

The research presented in this thesis contributes to the understanding of the complex relationship between periodontitis and diabetes mellitus (DM), and periodontitis and atherosclerotic cardiovascular disease (ACVD). It was observed that a substantial number of suspected new DM patients could be found in patients with periodontitis. Furthermore, periodontitis patients showed increased C-reactive protein (CRP) levels and more arterial stiffness compared to controls, reflecting an increased at...

Periodontitis, diabetes mellitus, cardiovascular disease : A Bermuda Triangle

NARCIS (Netherlands)

Teeuw, W.J.

2017-01-01

The research presented in this thesis contributes to the understanding of the complex relationship between periodontitis and diabetes mellitus (DM), and periodontitis and atherosclerotic cardiovascular disease (ACVD). It was observed that a substantial number of suspected new DM patients could be

Multilayer Relaxation and Surface Energies of Metallic Surfaces

Science.gov (United States)

Bozzolo, Guillermo; Rodriguez, Agustin M.; Ferrante, John

1994-01-01

The perpendicular and parallel multilayer relaxations of fcc (210) surfaces are studied using equivalent crystal theory (ECT). A comparison with experimental and theoretical results is made for AI(210). The effect of uncertainties in the input parameters on the magnitudes and ordering of surface relaxations for this semiempirical method is estimated. A new measure of surface roughness is proposed. Predictions for the multilayer relaxations and surface energies of the (210) face of Cu and Ni are also included.

MR imaging of brain surface structures: Surface anatomy scanning

International Nuclear Information System (INIS)

Katada, K.; Koga, S.; Asahina, M.; Kanno, T.; Asahina, K.

1987-01-01

Preoperative evaluation of brain surface anatomy, including cortical sulci and veins, relative to cerebral and cerebellar lesions is an important subject for surgeons. Until now, no imaging modality existed that allowed direct visualization of brain surface anatomy. A new MR imaging technique (surface anatomy scanning) was developed to visualize brain surface structures. The technique uses a spin-echo pulse sequence with long repetition and echo times, thick sections and a surface coil. Cortical sulci, fissures, veins, and intracranial lesions were clearly identified with this technique. Initial clinical results indicate that surface anatomy scanning is useful for lesion localization and for detailed evaluation of cortical and subcortical lesions

Investigation of surface roughness on etched glass surfaces

International Nuclear Information System (INIS)

Papa, Z.; Budai, J.; Farkas, B.; Toth, Z.

2011-01-01

Roughening the surface of solar cells is a common practice within the photovoltaic industry as it reduces reflectance, and thus enhances the performance of devices. In this work the relationship between reflectance characterized by the haze parameter, surface roughness and optical properties was investigated. To achieve this goal, model samples were prepared by hydrofluoric acid etching of glass for various times and measured by optical microscopy, spectroscopic ellipsometry, scanning electron microscopy, and atomic force microscopy. Our investigation showed that the surface reflectance was decreased not only by the roughening of the surface but also by the modification of the depth profile and lowering of the refractive index of the surface domain of the samples.

Surface-to-surface registration using level sets

DEFF Research Database (Denmark)

Hansen, Mads Fogtmann; Erbou, Søren G.; Vester-Christensen, Martin

2007-01-01

This paper presents a general approach for surface-to-surface registration (S2SR) with the Euclidean metric using signed distance maps. In addition, the method is symmetric such that the registration of a shape A to a shape B is identical to the registration of the shape B to the shape A. The S2SR...... problem can be approximated by the image registration (IR) problem of the signed distance maps (SDMs) of the surfaces confined to some narrow band. By shrinking the narrow bands around the zero level sets the solution to the IR problem converges towards the S2SR problem. It is our hypothesis...... that this approach is more robust and less prone to fall into local minima than ordinary surface-to-surface registration. The IR problem is solved using the inverse compositional algorithm. In this paper, a set of 40 pelvic bones of Duroc pigs are registered to each other w.r.t. the Euclidean transformation...

Correcting satellite-based precipitation products through SMOS soil moisture data assimilation in two land-surface models of different complexity: API and SURFEX

Science.gov (United States)

Real-time rainfall accumulation estimates at the global scale is useful for many applications. However, the real-time versions of satellite-based rainfall products are known to contain errors relative to real rainfall observed in situ. Recent studies have demonstrated how information about rainfall ...

Data Assimilation of SMAP Observations and the Impact on Weather Forecasts and Heat Stress

Science.gov (United States)

Zavodsky, Bradley; Case, Jonathan; Blankenship, Clay; Crosson, William; White, Khristopher

2014-01-01

SPoRT produces real-time LIS soil moisture products for situational awareness and local numerical weather prediction over CONUS, Mesoamerica, and East Africa ?Currently interact/collaborate with operational partners on evaluation of soil moisture products ?Drought/fire ?Extreme heat ?Convective initiation ?Flood and water borne diseases ?Initial efforts to assimilate L2 soil moisture observations from SMOS (as a precursor for SMAP) have been successful ?Active/passive blended product from SMAP will be assimilated similarly and higher spatial resolution should improve on local-scale processes

Surface thermodynamics

International Nuclear Information System (INIS)

Garcia-Moliner, F.

1975-01-01

Basic thermodynamics of a system consisting of two bulk phases with an interface. Solid surfaces: general. Discussion of experimental data on surface tension and related concepts. Adsorption thermodynamics in the Gibbsian scheme. Adsorption on inert solid adsorbents. Systems with electrical charges: chemistry and thermodynamics of imperfect crystals. Thermodynamics of charged surfaces. Simple models of charge transfer chemisorption. Adsorption heat and related concepts. Surface phase transitions

Annual Research Progress Report. 1 October 1977-30 September 1978.

Science.gov (United States)

1978-09-30

Role of Energy in Nitrogen Balance; 2) Hypocalor - ic Protein Diets ; 3) Nutrition in the Trauma Patient. Postgraduate 25 . . 3 Course in Hospital... Diets . International Conference on Parenteral Nutrition, Bermuda 16 May 77. Pruitt BA Jr: Report of National Representative to International Society...Blood Flow Changes Following Thermal Injury McDougal WS: Influence of Diet on Hepatic Function Lescher TJ: Treatment of Burns. Officers Basic Course

HYPOLIPEDEMIC EFFECT OF CYNODON DACTYLON ON HISTOPATHOLOGICAL STUDY AND DNA FRAGMENTATION ANALYSIS IN EXPERIMENTALLY INDUCED HYPERCHOLESTEREMIC RATS

OpenAIRE

C. Selva Kumar

2011-01-01

Hypercholesteremia is one of the risk factors for coronary artery disease. The present study highlights the efficacy of Ayurvedic herbal formulation Cynodon dactylon (Bermuda grass) on histopathological study and DNA fragmentation analysis in experimentally induced hypercholesteremic rats. Four groups of rats were employed namely control, hypercholesterolemia rats (4% Cholesterol＋1% cholic acid), Cynodon dactylon treatment in hypercholesteremic rats and Cynodon dactylon alone treated rats. Re...

Open algebraic surfaces

CERN Document Server

Miyanishi, Masayoshi

2000-01-01

Open algebraic surfaces are a synonym for algebraic surfaces that are not necessarily complete. An open algebraic surface is understood as a Zariski open set of a projective algebraic surface. There is a long history of research on projective algebraic surfaces, and there exists a beautiful Enriques-Kodaira classification of such surfaces. The research accumulated by Ramanujan, Abhyankar, Moh, and Nagata and others has established a classification theory of open algebraic surfaces comparable to the Enriques-Kodaira theory. This research provides powerful methods to study the geometry and topology of open algebraic surfaces. The theory of open algebraic surfaces is applicable not only to algebraic geometry, but also to other fields, such as commutative algebra, invariant theory, and singularities. This book contains a comprehensive account of the theory of open algebraic surfaces, as well as several applications, in particular to the study of affine surfaces. Prerequisite to understanding the text is a basic b...

Responsiveness to timothy grass pollen in individuals without known natural exposure in an allergen challenge chamber.

Science.gov (United States)

Ramirez, Daniel A; Andrews, Charles P; Rather, Cynthia G; Jacobs, Robert L

2015-03-01

The responsiveness to a nonendemic grass species is unknown and cannot be research without an allergen challenge chamber. To determine the clinical responsiveness to timothy grass pollen (TGP) in participants without known natural exposure in an allergen challenge chamber (ACC). Of the 26 screened participants, 22 met screening criteria and completed the 2 chamber exposures. The study consisted of an initial screening visit that included a blood draw for serum specific IgE (ssIGE) to Bermuda grass pollen and TGP followed by a 4½-day run-in phase and two 3-hour ACC exposure visits. This study was performed early in the first week of December 2013, when no seasonal pollens were detected in San Antonio, Texas. Symptom scores were recorded at baseline and every 30 minutes. Of the 26 screened participants, 22 met the screening criteria and completed the 2 chamber exposures. Thirteen participants had always lived in South Texas without natural exposure, and 9 had previously lived in areas with TGP exposure. All participants tested positive to TGP and Bermuda grass pollen. Twelve and 13 of 22 had positive ssIgE test results to Timothy and Bermuda allergens, respectively, with 11 having positive results for both allergens. There were strong correlations among skin prick test size, a positive ssIgE test result, and high symptoms from TGP exposure. There was little difference in symptoms between those who had lived their entire lives in South Texas and those who had lived elsewhere. In Texas, where exposure to TGP is minimal, strongly positive SPT and ssIgE test results were predictors of high symptoms to TGP exposure. Never exposed participants in South Texas reacted to TGP similar to those who had previous natural exposure, suggesting that in vivo cross-reactivity may be higher than predicted by prior in vitro data and may allow the use in clinical trials of allergens not endemic to the locale of an ACC. Copyright © 2015 American College of Allergy, Asthma & Immunology

Smooth surfaces from bilinear patches: Discrete affine minimal surfaces

KAUST Repository

Kä ferbö ck, Florian; Pottmann, Helmut

2013-01-01

Motivated by applications in freeform architecture, we study surfaces which are composed of smoothly joined bilinear patches. These surfaces turn out to be discrete versions of negatively curved affine minimal surfaces and share many properties

Sulfide Mineral Surfaces

International Nuclear Information System (INIS)

Rosso, Kevin M.; Vaughan, David J.

2006-01-01

The past twenty years or so have seen dramatic development of the experimental and theoretical tools available to study the surfaces of solids at the molecular (?atomic resolution?) scale. On the experimental side, two areas of development well illustrate these advances. The first concerns the high intensity photon sources associated with synchrotron radiation; these have both greatly improved the surface sensitivity and spatial resolution of already established surface spectroscopic and diffraction methods, and enabled the development of new methods for studying surfaces. The second centers on the scanning probe microscopy (SPM) techniques initially developed in the 1980's with the first scanning tunneling microscope (STM) and atomic force microscope (AFM) experiments. The direct 'observation' of individual atoms at surfaces made possible with these methods has truly revolutionized surface science. On the theoretical side, the availability of high performance computers coupled with advances in computational modeling has provided powerful new tools to complement the advances in experiment. Particularly important have been the quantum mechanics based computational approaches such as density functional theory (DFT), which can now be easily used to calculate the equilibrium crystal structures of solids and surfaces from first principles, and to provide insights into their electronic structure. In this chapter, we review current knowledge of sulfide mineral surfaces, beginning with an overview of the principles relevant to the study of the surfaces of all crystalline solids. This includes the thermodynamics of surfaces, the atomic structure of surfaces (surface crystallography and structural stability, adjustments of atoms at the surface through relaxation or reconstruction, surface defects) and the electronic structure of surfaces. We then discuss examples where specific crystal surfaces have been studied, with the main sulfide minerals organized by structure type

Sulfide Mineral Surfaces

Energy Technology Data Exchange (ETDEWEB)

Rosso, Kevin M.; Vaughan, David J.

2006-08-01

The past twenty years or so have seen dramatic development of the experimental and theoretical tools available to study the surfaces of solids at the molecular (?atomic resolution?) scale. On the experimental side, two areas of development well illustrate these advances. The first concerns the high intensity photon sources associated with synchrotron radiation; these have both greatly improved the surface sensitivity and spatial resolution of already established surface spectroscopic and diffraction methods, and enabled the development of new methods for studying surfaces. The second centers on the scanning probe microscopy (SPM) techniques initially developed in the 1980's with the first scanning tunneling microscope (STM) and atomic force microscope (AFM) experiments. The direct 'observation' of individual atoms at surfaces made possible with these methods has truly revolutionized surface science. On the theoretical side, the availability of high performance computers coupled with advances in computational modeling has provided powerful new tools to complement the advances in experiment. Particularly important have been the quantum mechanics based computational approaches such as density functional theory (DFT), which can now be easily used to calculate the equilibrium crystal structures of solids and surfaces from first principles, and to provide insights into their electronic structure. In this chapter, we review current knowledge of sulfide mineral surfaces, beginning with an overview of the principles relevant to the study of the surfaces of all crystalline solids. This includes the thermodynamics of surfaces, the atomic structure of surfaces (surface crystallography and structural stability, adjustments of atoms at the surface through relaxation or reconstruction, surface defects) and the electronic structure of surfaces. We then discuss examples where specific crystal surfaces have been studied, with the main sulfide minerals organized by

Removal of arsenate by ferrihydrite via surface complexation and surface precipitation

Energy Technology Data Exchange (ETDEWEB)

Jiang, Xiuli [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China); Peng, Changjun; Fu, Dun; Chen, Zheng [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Shen, Liang [Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China); Li, Qingbiao [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China); Ouyang, Tong, E-mail: yz3t@xmu.edu.cn [Department of Environment Engineering, College of the Environment and Ecology, and The Key Laboratory of the Ministry of Education for Coastal and Wetland Ecosystem, Xiamen University, Xiamen (China); Wang, Yuanpeng, E-mail: wypp@xmu.edu.cn [Department of Chemical and Biochemical Engineering, College of Chemistry and Chemical Engineering, and The Key Laboratory for Synthetic Biotechnology of Xiamen City, Xiamen University, Xiamen (China)

2015-10-30

Graphical abstract: - Highlights: • Surface complexation and surface precipitation of As on ferrihydrite happen at pH 3–6. • The formation of surface precipitation enhanced As(V) adsorption. • The dissolved Fe{sup 3+} had a good linear relationship with the amount of arsenate re-adsorption. - Abstract: In this study, macroscopic and spectroscopic experimental methods accurately modeled the sorption process of arsenate on ferrihydrite. EXAFS, X-ray diffraction and infrared (IR) spectroscopy indicated that the behavior of As(V) adsorption onto ferrihydrite took place mainly via surface complexation and surface precipitation at acidic pH (3.0–6.0), while the surface precipitation was dominated at longer time intervals and higher Fe{sup 3+} concentration. The macroscopic competitive adsorption experiment between arsenate with phosphate indicated two types of adsorption sites existing on the surface of ferrihydrite, i.e., non-exchangeable sites, which are responsible for a rapid surface complex formation; and exchangeable sites for a slow build-up of surface precipitates. In the slow build-up precipitates, the As(V) surface coverage (mmol/g) exhibited a good linear relationship (R{sup 2} = 0.952) with the amount of dissolved Fe{sup 3+}. Three steps are involved during the process of surface precipitation, i.e., (1) an initial uptake of As(V) via surface complexation; (2) re-adsorption of Fe{sup 3+} leaching from ferrihydrite on the surface complex; and (3) As(V) adsorption via surface complexation again and finally forming the surface precipitate.

Australian Soil Moisture Field Experiments in Support of Soil Moisture Satellite Observations

Science.gov (United States)

Kim, Edward; Walker, Jeff; Rudiger, Christopher; Panciera, Rocco

2010-01-01

Large-scale field campaigns provide the critical fink between our understanding retrieval algorithms developed at the point scale, and algorithms suitable for satellite applications at vastly larger pixel scales. Retrievals of land parameters must deal with the substantial sub-pixel heterogeneity that is present in most regions. This is particularly the case for soil moisture remote sensing, because of the long microwave wavelengths (L-band) that are optimal. Yet, airborne L-band imagers have generally been large, heavy, and required heavy-lift aircraft resources that are expensive and difficult to schedule. Indeed, US soil moisture campaigns, have been constrained by these factors, and European campaigns have used non-imagers due to instrument and aircraft size constraints. Despite these factors, these campaigns established that large-scale soil moisture remote sensing was possible, laying the groundwork for satellite missions. Starting in 2005, a series of airborne field campaigns have been conducted in Australia: to improve our understanding of soil moisture remote sensing at large scales over heterogeneous areas. These field data have been used to test and refine retrieval algorithms for soil moisture satellite missions, and most recently with the launch of the European Space Agency's Soil Moisture Ocean Salinity (SMOS) mission, to provide validation measurements over a multi-pixel area. The campaigns to date have included a preparatory campaign in 2005, two National Airborne Field Experiments (NAFE), (2005 and 2006), two campaigns to the Simpson Desert (2008 and 2009), and one Australian Airborne Cal/val Experiment for SMOS (AACES), just concluded in the austral spring of 2010. The primary airborne sensor for each campaign has been the Polarimetric L-band Microwave Radiometer (PLMR), a 6-beam pushbroom imager that is small enough to be compatible with light aircraft, greatly facilitating the execution of the series of campaigns, and a key to their success. An

[Influence of different surface treatments on porcelain surface topography].

Science.gov (United States)

Tai, Yinxia; Zhu, Xianchun; Sen, Yan; Liu, Chang; Zhang, Xian; Shi, Xueming

2013-02-01

To evaluate the influence of different surface treatments on porcelain surface topography. Metal ceramic prostheses in 6 groups were treated according to the different surface treatment methods, and the surface topography was observed through scanning electron microscope (SEM). Group A was the control one (untreated), group B was etched by 9.6% hydrofluoric acid(HF), group C was deglazed by grinding and then etched by 9.6% HF, group D was treated with Nd: YAG laser irradiation(0.75 W) and HF etching, group E was treated with Nd: YAG laser irradiation (1.05 W) and HF etching, and group F was treated with laser irradiation (1.45 W) and HF etching. Surface topography was different in different groups. A lot of inerratic cracks with the shapes of rhombuses and grid, and crater with a shape of circle were observed on the ceramic surface after treatment with energy parameters of 1.05 W Nd: YAG laser irradiation and 9.6% HF etching (group E). Surface topography showed a lot of concaves on the inner wall of the cracks, and the concaves with diameter of 1-5 microm could be observed on the inner wall of the holes, which had a diameter of 20 microm under SEM. The use of Nd: YAG laser irradiation with the energy parameters of 1.05 W and the HF with a concentration of 9.6% can evenly coarsen the porcelain surface, that is an effective surface treatment method.

Laser surface texturing of tool steel: textured surfaces quality evaluation

Science.gov (United States)

Šugár, Peter; Šugárová, Jana; Frnčík, Martin

2016-05-01

In this experimental investigation the laser surface texturing of tool steel of type 90MnCrV8 has been conducted. The 5-axis highly dynamic laser precision machining centre Lasertec 80 Shape equipped with the nano-second pulsed ytterbium fibre laser and CNC system Siemens 840 D was used. The planar and spherical surfaces first prepared by turning have been textured. The regular array of spherical and ellipsoidal dimples with a different dimensions and different surface density has been created. Laser surface texturing has been realized under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of ablated surfaces has been performed using scanning electron microscopy (SEM) technique. The results show limited possibility of ns pulse fibre laser application to generate different surface structures for tribological modification of metallic materials. These structures were obtained by varying the processing conditions between surface ablation, to surface remelting. In all cases the areas of molten material and re-cast layers were observed on the bottom and walls of the dimples. Beside the influence of laser beam parameters on the machined surface quality during laser machining of regular hemispherical and elipsoidal dimple texture on parabolic and hemispherical surfaces has been studied.

Test surfaces useful for calibration of surface profilometers

Science.gov (United States)

Yashchuk, Valeriy V; McKinney, Wayne R; Takacs, Peter Z

2013-12-31

The present invention provides for test surfaces and methods for calibration of surface profilometers, including interferometric and atomic force microscopes. Calibration is performed using a specially designed test surface, or the Binary Pseudo-random (BPR) grating (array). Utilizing the BPR grating (array) to measure the power spectral density (PSD) spectrum, the profilometer is calibrated by determining the instrumental modulation transfer.

Transversal Surfaces of Timelike Ruled Surfaces in Minkowski 3-Space

OpenAIRE

Önder, Mehmet

2012-01-01

In this study we give definitions and characterizations of transversal surfaces of timelike ruled surfaces. We study some special cases such as the striction curve is a geodesic, an asymptotic line or a line of curvature. Moreover, we obtain developable conditions for transversal surfaces of a timelike ruled surface.

Surface phonons

CERN Document Server

Wette, Frederik

1991-01-01

In recent years substantial progress has been made in the detection of surface phonons owing to considerable improvements in inelastic rare gas scattering tech­ niques and electron energy loss spectroscopy. With these methods it has become possible to measure surface vibrations in a wide energy range for all wave vectors in the two-dimensional Brillouin zone and thus to deduce the complete surface phonon dispersion curves. Inelastic atomic beam scattering and electron energy loss spectroscopy have started to play a role in the study of surface phonons similar to the one played by inelastic neutron scattering in the investigation of bulk phonons in the last thirty years. Detailed comparison between experimen­ tal results and theoretical studies of inelastic surface scattering and of surface phonons has now become feasible. It is therefore possible to test and to improve the details of interaction models which have been worked out theoretically in the last few decades. At this point we felt that a concise, co...

Atmosphere-surface interactions over polar oceans and heterogeneous surfaces

Energy Technology Data Exchange (ETDEWEB)

Vihma, T.

1995-12-31

Processes of interaction between the atmospheric boundary layer and the planetary surface have been studied with special emphasis on polar ocean surfaces: the open ocean, leads, polynyas and sea ice. The local exchange of momentum, heat and moisture has been studied experimentally both in the Weddell Sea and in the Greenland Sea. Exchange processes over heterogeneous surfaces are addressed by modelling studies. Over a homogeneous surface, the local turbulent fluxes can be reasonably well estimated using an iterative flux-profile scheme based on the Monin-Obukhov similarity theory. In the Greenland Sea, the near-surface air temperature and the generally small turbulent fluxes over the open ocean were affected by the sea surface temperature fronts. Over the sea ice cover in the Weddell Sea, the turbulent sensible heat flux was generally downwards, and together with an upward oceanic heat flux through the ice it compensated the heat loss from the surface via long-wave radiation. The wind dominated on time scales of days, while the current became important on longer time scales. The drift dynamics showed apparent spatial differences between the eastern and western regions, as well as between the Antarctic Circumpolar Current and the rest of the Weddell Sea. Inertial motion was present in regions of low ice concentration. The surface heterogeneity, arising e.g. from roughness or temperature distribution, poses a problem for the parameterization of surface exchange processes in large-scale models. In the case of neutral flow over a heterogeneous terrain, an effective roughness length can be used to parameterize the roughness effects

Atmosphere-surface interactions over polar oceans and heterogeneous surfaces

Energy Technology Data Exchange (ETDEWEB)

Vihma, T

1996-12-31

Processes of interaction between the atmospheric boundary layer and the planetary surface have been studied with special emphasis on polar ocean surfaces: the open ocean, leads, polynyas and sea ice. The local exchange of momentum, heat and moisture has been studied experimentally both in the Weddell Sea and in the Greenland Sea. Exchange processes over heterogeneous surfaces are addressed by modelling studies. Over a homogeneous surface, the local turbulent fluxes can be reasonably well estimated using an iterative flux-profile scheme based on the Monin-Obukhov similarity theory. In the Greenland Sea, the near-surface air temperature and the generally small turbulent fluxes over the open ocean were affected by the sea surface temperature fronts. Over the sea ice cover in the Weddell Sea, the turbulent sensible heat flux was generally downwards, and together with an upward oceanic heat flux through the ice it compensated the heat loss from the surface via long-wave radiation. The wind dominated on time scales of days, while the current became important on longer time scales. The drift dynamics showed apparent spatial differences between the eastern and western regions, as well as between the Antarctic Circumpolar Current and the rest of the Weddell Sea. Inertial motion was present in regions of low ice concentration. The surface heterogeneity, arising e.g. from roughness or temperature distribution, poses a problem for the parameterization of surface exchange processes in large-scale models. In the case of neutral flow over a heterogeneous terrain, an effective roughness length can be used to parameterize the roughness effects

Surface properties of Ti-6Al-4V alloy part I: Surface roughness and apparent surface free energy

Energy Technology Data Exchange (ETDEWEB)

Yan, Yingdi; Chibowski, Emil; Szcześ, Aleksandra, E-mail: aszczes@poczta.umcs.lublin.pl

2017-01-01

Titanium (Ti) and its alloys are the most often used implants material in dental treatment and orthopedics. Topography and wettability of its surface play important role in film formation, protein adhesion, following osseointegration and even duration of inserted implant. In this paper, we prepared Ti-6Al-4V alloy samples using different smoothing and polishing materials as well the air plasma treatment, on which contact angles of water, formamide and diiodomethane were measured. Then the apparent surface free energy was calculated using four different approaches (CAH, LWAB, O-W and Neumann's Equation of State). From LWAB approach the components of surface free energy were obtained, which shed more light on the wetting properties of samples surface. The surface roughness of the prepared samples was investigated with the help of optical profilometer and AFM. It was interesting whether the surface roughness affects the apparent surface free energy. It was found that both polar interactions the electron donor parameter of the energy and the work of water adhesion increased with decreasing roughness of the surfaces. Moreover, short time plasma treatment (1 min) caused decrease in the surface hydrophilic character, while longer time (10 min) treatment caused significant increase in the polar interactions and the work of water adhesion. Although Ti-6Al-4V alloy has been investigated many times, to our knowledge, so far no paper has been published in which surface roughness and changes in the surface free energy of the alloy were compared in the quantitative way in such large extent. This novel approach deliver better knowledge about the surface properties of differently smoothed and polished samples which may be helpful to facilitate cell adhesion, proliferation and mineralization. Therefore the results obtained present also potentially practical meaning. - Highlights: • Surface of five Ti-6Al-4V alloy samples were smoothed and polished successively. • The

Surfaces of Building Practice

OpenAIRE

Surynková, Petra

2009-01-01

My diploma thesis Surfaces of Building Practice deals with the basic properties of surfaces, their mathematical description, categorization, and application in technical practice. Each studied surface is defined and its process of construction and parametrical description is listed. The thesis studies selected types of surfaces in details - these surfaces include surfaces of revolution, ruled surfaces, screw surfaces, and translational surfaces. An application of each studied surfaces is show...

Scanning Surface Potential Microscopy of Spore Adhesion on Surfaces

Energy Technology Data Exchange (ETDEWEB)

Lee, Ida [University of Tennessee, Knoxville (UTK); Chung, Eunhyea [Georgia Institute of Technology; Kweon, Hyojin [Georgia Institute of Technology; Yiacoumi, Sotira [Georgia Institute of Technology; Tsouris, Costas [ORNL

2012-01-01

The adhesion of spores of Bacillus anthracis - the cause of anthrax and a likely biological threat - to solid surfaces is an important consideration in cleanup after an accidental or deliberate release. However, because of safety concerns, directly studying B. anthracis spores with advanced instrumentation is problematic. As a first step, we are examining the electrostatic potential of Bacillus thuringiensis (Bt), which is a closely related species that is often used as a simulant to study B. anthracis. Scanning surface potential microscopy (SSPM), also known as Kelvin probe force microscopy (KPFM), was used to investigate the influence of relative humidity (RH) on the surface electrostatic potential of Bt that had adhered to silica, mica, or gold substrates. AFM/SSPM side-by-side images were obtained separately in air, at various values of RH, after an aqueous droplet with spores was applied on each surface and allowed to dry before measurements. In the SSPM images, a negative potential on the surface of the spores was observed compared with that of the substrates. The surface potential decreased as the humidity increased. Spores were unable to adhere to a surface with an extremely negative potential, such as mica.

ASSESSMENT OF SURFACE QUALITY FOR CHOSEN MILLING STRATEGIES WHEN PRODUCING RELIEF SURFACES

OpenAIRE

Jan Varga; Jozef Stahovec; Jozef Beno; Marek Vrabeľ

2014-01-01

The paper deals with design and modeling of the relief surfaces that are produced in milling. Modeled and real surface quality is presented for the chosen fragments of the relief surfaces. Fragmentation of the relief surfaces has been made by the surface sampling. Milling strategies are compared with regard to surface formation. Surface quality was checked with regard to applied cutting conditions.

Advanced Surface Technology

DEFF Research Database (Denmark)

Møller, Per; Nielsen, Lars Pleht

of the components. It covers everything from biocompatible surfaces of IR absorbent or reflective surfaces to surfaces with specific properties within low friction, hardness, corrosion, colors, etc. The book includes more than 400 pages detailing virtually all analysis methods for examining at surfaces.......This new significant book on advanced modern surface technology in all its variations, is aimed at both teaching at engineering schools and practical application in industry. The work covers all the significant aspects of modern surface technology and also describes how new advanced techniques make...

Surface parameter characterization of surface vibrations in linear chains

International Nuclear Information System (INIS)

Majlis, N.; Selzer, S.; Puszkarski, H.; Diep-The-Hung

1982-12-01

We consider the vibrations of a linear monatomic chain with a complex surface potential defined by the surface pinning parameter a=Aesup(-i psi). It is found that in the case of a semi-infinite chain a is connected with the surface vibration wave number k=s+it by the exact relations: s=psi, t=lnA. We also show that the solutions found can be regarded as approximate ones (in the limit L>>1) for surface vibrations of a finite chain consisting of L atoms. (author)

Relevance of Riverine Capability for Today’s Portuguese Navy

Science.gov (United States)

2009-01-01

Crespo, 537-550. 21 Cann, Brown Waters ofAfrica, 46. 22 Jose Alberto Lopes Carvalheira, "Acyao da Marinha em Aguas Interiores (1961-1971)" [Naval...Lopes Carvalheira, Jose Alberto. "Acyao da Marinha em Aguas Interiores (1961-1971)." [Naval Operations in Inland Waters (1961-1971)]. In the...Americas Country Antigua and Barbados Argentina Aruba Barbados Bermuda Bolivia Brazil Canada Chile Colombia Cuba Dominica Dominican Republic Equator Grenada

Reserve Component Programs, Fiscal Year 1987.

Science.gov (United States)

1987-01-01

would fight. War- time missions are executed with United States and foreign forces, just as would occur &WV ft Ra RDdNemv cowei hr ~u~, FY M87 Exwutdm...Luxembourg Somalia Bermuda Greece Madagascar South Korea Bolivia Greenland Malaysia Spain Brazil Grenada Marshall Islands Sweden Cameroon Guam Mexico...Major Dell M. Dempsey, USMCR Ecuadoran Military attache in Panama 0 Colonel James V. Dugar, ANGUS * Young, Colonel Ralph R. (USAR) 0 Colonel

Red River Waterway, Louisiana, Texas, Arkansas, and Oklahoma, Mississippi River to Shreveport, Louisiana. General Reevaluation Report.

Science.gov (United States)

1982-12-01

occur, includes salt cedar, false nettle , cocklebur, goldenrod, dog fennel, and Bermuda grass. The more mature riverine habitat usually consists of a mix...broomsedge, various legumes, and many other species might occur in this habitat type. Pastureland is a food source for many insect species and, if not grazed...too heavily, provides abundant habitat to insects as well as succulent growth for herbivorous mammals. Songbirds most common to the pasture are

Mid-plate, mid-gyre seabed assessment program for nuclear waste disposal. Final report

International Nuclear Information System (INIS)

Hollister, C.D.

1976-01-01

Status of the following tasks is reported: acoustic experiments for lateral and vertical consistency determinations; design, fabricate, and interface core launch and recovery system for C. S. LONG LINES; field test Giant Piston Core (GPC) on Bermuda Rise with LONG LINES, summer of 1976; GPC cruise to MPG-1 in October 1976; core sample analysis and data synthesis for vertical consistency; and acoustic mapping of MPG-1 for horizontal consistency

International trends in health science librarianship. Part 5 Latin America and the Caribbean.

Science.gov (United States)

Berry, Beverley; Rodrííguez-Jiménez, Teresa M

2013-03-01

This is the 5th in a series of articles exploring international trends in health science librarianship in Latin America and the Caribbean in the first decade of the 21st century. The invited authors are from Argentina, Bermuda and Mexico. Future issues will track trends in Central Europe and the Middle East. JM. © 2013 The authors. Health Information and Libraries Journal © 2013 Health Libraries Group.

The Foreign Disclosure and Technical Information System (FORDTIS) User Manual

Science.gov (United States)

1985-07-01

INDIA 10 BRITISH INDIAN OCEAN TERRITORY IP CLIPPERTON ISLAND IQ UNITED STATES MISCELLANEOUS PACIFIC ISLANDS (obsolete) IR , IRAN IS ISRAEL IT...CARTIER ISLANDS AU AUSTRIA AV ANGUILLA AY ANTARCTICA BA BAHRAIN BB BARBADOS ’ - ’ BC BOTSWANA BD BERMUDA BE BELGIUM BP...BAHAMAS, THE BG BANGLADESH BH BELIZE BL BOLIVIA BM BURMA BN BENIN (formerly DM) BP SOLOMON ISLANDS BQ NAVASSA ISLAND BR BRAZIL BS BASSAS DA INDIA

Eripalgeline universum Polymeri kultuuritehases / Marian Kivila

Index Scriptorium Estoniae

Kivila, Marian

2008-01-01

23. V toimunud rahvusvahelise tegevuskunstifestivali "Diverse Universe IV" performance''i-programmist Non Grata Kunstikonteineris Kultuuritehases Polymer. Sandra Jõgeva ja rühmituse Cnopt, rühmituse Non Grata, korealase Kim Baek-Ki ning sakslaste Micha Stegeri ja Andreas Stadleri, poolakate Marta Zioleki ja Agata Siniarska, ameeriklase Travis McCoy Fulleri, Russ Butleri (Bermuda), rühmituse HorseCow (Sacramento) performance'itest. Lühidalt Non Grata videonäitusest

Smooth polyhedral surfaces

KAUST Repository

Gü nther, Felix; Jiang, Caigui; Pottmann, Helmut

2017-01-01

Polyhedral surfaces are fundamental objects in architectural geometry and industrial design. Whereas closeness of a given mesh to a smooth reference surface and its suitability for numerical simulations were already studied extensively, the aim of our work is to find and to discuss suitable assessments of smoothness of polyhedral surfaces that only take the geometry of the polyhedral surface itself into account. Motivated by analogies to classical differential geometry, we propose a theory of smoothness of polyhedral surfaces including suitable notions of normal vectors, tangent planes, asymptotic directions, and parabolic curves that are invariant under projective transformations. It is remarkable that seemingly mild conditions significantly limit the shapes of faces of a smooth polyhedral surface. Besides being of theoretical interest, we believe that smoothness of polyhedral surfaces is of interest in the architectural context, where vertices and edges of polyhedral surfaces are highly visible.

Smooth polyhedral surfaces

KAUST Repository

Günther, Felix

2017-03-15

Polyhedral surfaces are fundamental objects in architectural geometry and industrial design. Whereas closeness of a given mesh to a smooth reference surface and its suitability for numerical simulations were already studied extensively, the aim of our work is to find and to discuss suitable assessments of smoothness of polyhedral surfaces that only take the geometry of the polyhedral surface itself into account. Motivated by analogies to classical differential geometry, we propose a theory of smoothness of polyhedral surfaces including suitable notions of normal vectors, tangent planes, asymptotic directions, and parabolic curves that are invariant under projective transformations. It is remarkable that seemingly mild conditions significantly limit the shapes of faces of a smooth polyhedral surface. Besides being of theoretical interest, we believe that smoothness of polyhedral surfaces is of interest in the architectural context, where vertices and edges of polyhedral surfaces are highly visible.

Ion surface collisions on surfaces relevant for fusion devices

International Nuclear Information System (INIS)

Rasul, B.; Endstrasser, N.; Zappa, F.; Grill, V.; Scheier, P.; Mark, T.

2006-01-01

Full text: One of the great challenges of fusion research is the compatibility of reactor grade plasmas with plasma facing materials coating the inner walls of a fusion reactor. The question of which surface coating should be used is of particular interest for the design of ITER. The impact of energetic plasma particles leads to sputtering of wall material into the plasma. A possible solution for the coating of plasma facing walls would be the use of special carbon surfaces. Investigations of these various surfaces have been started at BESTOF ion-surface collision apparatus. Experiment beam of singly charged molecular ions of hydrocarbon molecules, i.e. C 2 H + 4 , is generated in a Nier-type electron impact ionization source at an electron energy of about 70 eV. In the first double focusing mass spectrometer the ions are mass and energy analyzed and afterwards refocused onto a surface. The secondary reaction products are monitored using a Time Of Flight mass spectrometer. The secondary ion mass spectra are recorded as a function of the collision energy for different projectile ions and different surfaces. A comparison of these spectra show for example distinct changes in the survival probability of the same projectile ion C 2 H + 4 for different surfaces. (author)

Surface Modification and Surface - Subsurface Exchange Processes on Europa

Science.gov (United States)

Phillips, C. B.; Molaro, J.; Hand, K. P.

2017-12-01

The surface of Jupiter's moon Europa is modified by exogenic processes such as sputtering, gardening, radiolysis, sulfur ion implantation, and thermal processing, as well as endogenic processes including tidal shaking, mass wasting, and the effects of subsurface tectonic and perhaps cryovolcanic activity. New materials are created or deposited on the surface (radiolysis, micrometeorite impacts, sulfur ion implantation, cryovolcanic plume deposits), modified in place (thermal segregation, sintering), transported either vertically or horizontally (sputtering, gardening, mass wasting, tectonic and cryovolcanic activity), or lost from Europa completely (sputtering, plumes, larger impacts). Some of these processes vary spatially, as visible in Europa's leading-trailing hemisphere brightness asymmetry. Endogenic geologic processes also vary spatially, depending on terrain type. The surface can be classified into general landform categories that include tectonic features (ridges, bands, cracks); disrupted "chaos-type" terrain (chaos blocks, matrix, domes, pits, spots); and impact craters (simple, complex, multi-ring). The spatial distribution of these terrain types is relatively random, with some differences in apex-antiapex cratering rates and latitudinal variation in chaos vs. tectonic features. In this work, we extrapolate surface processes and rates from the top meter of the surface in conjunction with global estimates of transport and resurfacing rates. We combine near-surface modification with an estimate of surface-subsurface (and vice versa) transport rates for various geologic terrains based on an average of proposed formation mechanisms, and a spatial distribution of each landform type over Europa's surface area. Understanding the rates and mass balance for each of these processes, as well as their spatial and temporal variability, allows us to estimate surface - subsurface exchange rates over the average surface age ( 50myr) of Europa. Quantifying the timescale

Surface properties of Ti-6Al-4V alloy part I: Surface roughness and apparent surface free energy.

Science.gov (United States)

Yan, Yingdi; Chibowski, Emil; Szcześ, Aleksandra

2017-01-01

Titanium (Ti) and its alloys are the most often used implants material in dental treatment and orthopedics. Topography and wettability of its surface play important role in film formation, protein adhesion, following osseointegration and even duration of inserted implant. In this paper, we prepared Ti-6Al-4V alloy samples using different smoothing and polishing materials as well the air plasma treatment, on which contact angles of water, formamide and diiodomethane were measured. Then the apparent surface free energy was calculated using four different approaches (CAH, LWAB, O-W and Neumann's Equation of State). From LWAB approach the components of surface free energy were obtained, which shed more light on the wetting properties of samples surface. The surface roughness of the prepared samples was investigated with the help of optical profilometer and AFM. It was interesting whether the surface roughness affects the apparent surface free energy. It was found that both polar interactions the electron donor parameter of the energy and the work of water adhesion increased with decreasing roughness of the surfaces. Moreover, short time plasma treatment (1min) caused decrease in the surface hydrophilic character, while longer time (10min) treatment caused significant increase in the polar interactions and the work of water adhesion. Although Ti-6Al-4V alloy has been investigated many times, to our knowledge, so far no paper has been published in which surface roughness and changes in the surface free energy of the alloy were compared in the quantitative way in such large extent. This novel approach deliver better knowledge about the surface properties of differently smoothed and polished samples which may be helpful to facilitate cell adhesion, proliferation and mineralization. Therefore the results obtained present also potentially practical meaning. Copyright © 2016 Elsevier B.V. All rights reserved.

Characterization of polymer surface structure and surface mechanical behaviour by sum frequency generation surface vibrational spectroscopy and atomic force microscopy

International Nuclear Information System (INIS)

Opdahl, Aric; Koffas, Telly S; Amitay-Sadovsky, Ella; Kim, Joonyeong; Somorjai, Gabor A

2004-01-01

Sum frequency generation (SFG) vibrational spectroscopy and atomic force microscopy (AFM) have been used to study polymer surface structure and surface mechanical behaviour, specifically to study the relationships between the surface properties of polymers and their bulk compositions and the environment to which the polymer is exposed. The combination of SFG surface vibrational spectroscopy and AFM has been used to study surface segregation behaviour of polyolefin blends at the polymer/air and polymer/solid interfaces. SFG surface vibrational spectroscopy and AFM experiments have also been performed to characterize the properties of polymer/liquid and polymer/polymer interfaces, focusing on hydrogel materials. A method was developed to study the surface properties of hydrogel contact lens materials at various hydration conditions. Finally, the effect of mechanical stretching on the surface composition and surface mechanical behaviour of phase-separated polyurethanes, used in biomedical implant devices, has been studied by both SFG surface vibrational spectroscopy and AFM. (topical review)

Extremal surface barriers

International Nuclear Information System (INIS)

Engelhardt, Netta; Wall, Aron C.

2014-01-01

We present a generic condition for Lorentzian manifolds to have a barrier that limits the reach of boundary-anchored extremal surfaces of arbitrary dimension. We show that any surface with nonpositive extrinsic curvature is a barrier, in the sense that extremal surfaces cannot be continuously deformed past it. Furthermore, the outermost barrier surface has nonnegative extrinsic curvature. Under certain conditions, we show that the existence of trapped surfaces implies a barrier, and conversely. In the context of AdS/CFT, these barriers imply that it is impossible to reconstruct the entire bulk using extremal surfaces. We comment on the implications for the firewall controversy

Imaging near-surface heterogeneities by natural migration of surface waves

KAUST Repository

Liu, Zhaolun; AlTheyab, Abdullah; Hanafy, Sherif M.; Schuster, Gerard T.

2016-01-01

We demonstrate that near-surface heterogeneities can be imaged by natural migration of backscattered surface waves in common shot gathers. No velocity model is required because the data are migrated onto surface points with the virtual Green

Inspection of freeform surfaces considering uncertainties in measurement, localization and surface reconstruction

International Nuclear Information System (INIS)

Mehrad, Vahid; Xue, Deyi; Gu, Peihua

2013-01-01

Inspection of a manufactured freeform surface can be conducted by building its surface model and comparing this manufactured surface model with the ideal design surface model and its tolerance requirement. The manufactured freeform surface model is usually achieved by obtaining measurement points on the manufactured surface, transforming these measurement points from the measurement coordinate system to the design coordinate system through localization, and reconstructing the surface model using the localized measurement points. In this research, a method was developed to estimate the locations and their variances of any selected points on the reconstructed freeform surface considering different sources of uncertainties in measurement, localization and surface reconstruction processes. In this method, first locations and variances of the localized measurement points are calculated considering uncertainties of the measurement points and uncertainties introduced in the localization processes. Then locations and variances of points on the reconstructed freeform surface are obtained considering uncertainties of the localized measurement points and uncertainties introduced in the freeform surface reconstruction process. Two case studies were developed to demonstrate how these three different uncertainty sources influence the quality of the reconstructed freeform curve and freeform surface in inspection. (paper)

Variability of emissivity and surface temperature over a sparsely vegetated surface

International Nuclear Information System (INIS)

Humes, K.S.; Kustas, W.P.; Moran, M.S.; Nichols, W.D.; Weltz, M.A.

1994-01-01

Radiometric surface temperatures obtained from remote sensing measurements are a function of both the physical surface temperature and the effective emissivity of the surface within the band pass of the radiometric measurement. For sparsely vegetated areas, however, a sensor views significant fractions of both bare soil and various vegetation types. In this case the radiometric response of a sensor is a function of the emissivities and kinetic temperatures of various surface elements, the proportion of those surface elements within the field of view of the sensor, and the interaction of radiation emitted from the various surface components. In order to effectively utilize thermal remote sensing data to quantify energy balance components for a sparsely vegetated area, it is important to examine the typical magnitude and degree of variability of emissivity and surface temperature for such surfaces. Surface emissivity measurements and ground and low-altitude-aircraft-based surface temperature measurements (8-13 micrometer band pass) made in conjunction with the Monsoon '90 field experiment were used to evaluate the typical variability of those quantities during the summer rainy season in a semiarid watershed. The average value for thermal band emissivity of the exposed bare soil portions of the surface was found to be approximately 0.96; the average value measured for most of the varieties of desert shrubs present was approximately 0.99. Surface composite emissivity was estimated to be approximately 0.98 for both the grass-dominated and shrub-dominated portions of the watershed. The spatial variability of surface temperature was found to be highly dependent on the spatial scale of integration for the instantaneous field of view (IFOV) of the instrument, the spatial scale of the total area under evaluation, and the time of day

SURFACE PHOTOMETRY OF LOW SURFACE BRIGHTNESS GALAXIES

NARCIS (Netherlands)

DEBLOK, WJG; VANDERHULST, JM; BOTHUN, GD

1995-01-01

Low surface brightness (LSB) galaxies are galaxies dominated by an exponential disc whose central surface brightness is much fainter than the value of mu(B)(0) = 21.65 +/- 0.30 mag arcsec(-2) found by Freeman. In this paper we present broadband photometry of a sample of 21 late-type LSB galaxies.

Surface composition and surface properties of water hyacinth ...

African Journals Online (AJOL)

Surface composition and surface properties of water hyacinth ( Eichhornia ... (2/1, v/v) followed by ethanol, using Fourier Transform Infra-red (FT-IR) spectroscopy, ... polar organic solvents and non-polar n-alkane hydrocarbons is discussed.

Sliding surface searching method for slopes containing a potential weak structural surface

Directory of Open Access Journals (Sweden)

Aijun Yao

2014-06-01

Full Text Available Weak structural surface is one of the key factors controlling the stability of slopes. The stability of rock slopes is in general concerned with set of discontinuities. However, in soft rocks, failure can occur along surfaces approaching to a circular failure surface. To better understand the position of potential sliding surface, a new method called simplex-finite stochastic tracking method is proposed. This method basically divides sliding surface into two parts: one is described by smooth curve obtained by random searching, the other one is polyline formed by the weak structural surface. Single or multiple sliding surfaces can be considered, and consequently several types of combined sliding surfaces can be simulated. The paper will adopt the arc-polyline to simulate potential sliding surface and analyze the searching process of sliding surface. Accordingly, software for slope stability analysis using this method was developed and applied in real cases. The results show that, using simplex-finite stochastic tracking method, it is possible to locate the position of a potential sliding surface in the slope.

Smooth surfaces from bilinear patches: Discrete affine minimal surfaces

KAUST Repository

Käferböck, Florian

2013-06-01

Motivated by applications in freeform architecture, we study surfaces which are composed of smoothly joined bilinear patches. These surfaces turn out to be discrete versions of negatively curved affine minimal surfaces and share many properties with their classical smooth counterparts. We present computational design approaches and study special cases which should be interesting for the architectural application. 2013 Elsevier B.V.

Imaging near-surface heterogeneities by natural migration of backscattered surface waves

KAUST Repository

AlTheyab, Abdullah

2016-02-01

We present a migration method that does not require a velocity model to migrate backscattered surface waves to their projected locations on the surface. This migration method, denoted as natural migration, uses recorded Green\\'s functions along the surface instead of simulated Green\\'s functions. The key assumptions are that the scattering bodies are within the depth interrogated by the surface waves, and the Green\\'s functions are recorded with dense receiver sampling along the free surface. This natural migration takes into account all orders of multiples, mode conversions and non-linear effects of surface waves in the data. The natural imaging formulae are derived for both active source and ambient-noise data, and computer simulations show that natural migration can effectively image near-surface heterogeneities with typical ambient-noise sources and geophone distributions.

Surface adhesion and confinement variation of Staphylococcus aurius on SAM surfaces

Science.gov (United States)

Amroski, Alicia; Olsen, Morgan; Calabrese, Joseph; Senevirathne, Reshani; Senevirathne, Indrajith

2012-02-01

Controlled surface adhesion of non - pathogenic gram positive strain, Staphylococcus aureus is interesting as a model system due to possible development of respective biosensors for prevention and detection of the pathogenic strain methicillin resistant Staphylococcus aureus (MRSA) and further as a study for bio-machine interfacing. Self Assembled Monolayers (SAM) with engineered surfaces of linear thiols on Au(111) were used as the substrate. Sub cultured S. aureus were used for the analysis. The SAM layered surfaces were dipped in 2 -- 4 Log/ml S. aureus solution. Subsequent surface adhesion at different bacterial dilutions on surfaces will be discussed, and correlated with quantitative and qualitative adhesion properties of bacteria on the engineered SAM surfaces. The bacteria adhered SAM surfaces were investigated using intermittent contact, noncontact, lateral force and contact modes of Atomic Force Microscopy (AFM).

Surface-enhanced chiroptical spectroscopy with superchiral surface waves.

Science.gov (United States)

Pellegrini, Giovanni; Finazzi, Marco; Celebrano, Michele; Duò, Lamberto; Biagioni, Paolo

2018-07-01

We study the chiroptical properties of one-dimensional photonic crystals supporting superchiral surface waves by introducing a simple formalism based on the Fresnel reflection matrix. We show that the proposed framework provides useful insights on the behavior of all the relevant chiroptical quantities, allowing for a deeper understanding of surface-enhanced chiral sensing platforms based on one-dimensional photonic crystals. Finally, we analyze and discuss the limitations of such platforms as the surface concentration of the target chiral analytes is gradually increased. © 2018 Wiley Periodicals, Inc.

Bacteria-surface interactions.

Science.gov (United States)

Tuson, Hannah H; Weibel, Douglas B

2013-05-14

The interaction of bacteria with surfaces has important implications in a range of areas, including bioenergy, biofouling, biofilm formation, and the infection of plants and animals. Many of the interactions of bacteria with surfaces produce changes in the expression of genes that influence cell morphology and behavior, including genes essential for motility and surface attachment. Despite the attention that these phenotypes have garnered, the bacterial systems used for sensing and responding to surfaces are still not well understood. An understanding of these mechanisms will guide the development of new classes of materials that inhibit and promote cell growth, and complement studies of the physiology of bacteria in contact with surfaces. Recent studies from a range of fields in science and engineering are poised to guide future investigations in this area. This review summarizes recent studies on bacteria-surface interactions, discusses mechanisms of surface sensing and consequences of cell attachment, provides an overview of surfaces that have been used in bacterial studies, and highlights unanswered questions in this field.

Self-Assembly Template Driven 3D Inverse Opal Microspheres Functionalized with Catalyst Nanoparticles Enabling a Highly Efficient Chemical Sensing Platform.

Science.gov (United States)

Wang, Tianshuang; Can, Inci; Zhang, Sufang; He, Junming; Sun, Peng; Liu, Fangmeng; Lu, Geyu

2018-02-14

The design of semiconductor metal oxides (SMOs) with well-ordered porous structure has attracted tremendous attention owing to their larger specific surface area. Herein, three-dimensional inverse opal In 2 O 3 microspheres (3D-IO In 2 O 3 MSs) were fabricated through one-step ultrasonic spray pyrolysis (USP) which employed self-assembly sulfonated polystyrene (S-PS) spheres as a sacrificial template. The spherical pores observed in the 3D-IO In 2 O 3 MSs had diameters of about 4 and 80 nm. Subsequently, the catalytic palladium oxide nanoparticles (PdO NPs) were loaded on 3D-IO In 2 O 3 MSs via a simple impregnation method, and their gas sensing properties were investigated. In a comparison with pristine 3D-IO In 2 O 3 MSs, the 3D-IO PdO@In 2 O 3 MSs exhibited a 3.9 times higher response (R air /R gas = 50.9) to 100 ppm acetone at 250 °C and a good acetone selectivity. The detection limit for acetone could extend down to ppb level. Furthermore, the 3D-IO PdO@In 2 O 3 MSs-based sensor also possess good long-term stability. The extraordinary sensing performance can be attributed to the novel 3D periodic porous structure, highly three-dimensional interconnection, larger specific surface area, size-tunable (meso- and macroscale) bimodal pores, and PdO NP catalysts.

A corrugated perfect magnetic conductor surface supporting spoof surface magnon polaritons.

Science.gov (United States)

Liu, Liang-liang; Li, Zhuo; Gu, Chang-qing; Ning, Ping-ping; Xu, Bing-zheng; Niu, Zhen-yi; Zhao, Yong-jiu

2014-05-05

In this paper, we demonstrate that spoof surface magnon polaritons (SSMPs) can propagate along a corrugated perfect magnetic conductor (PMC) surface. From duality theorem, the existence of surface electromagnetic modes on corrugated PMC surfaces are manifest to be transverse electric (TE) mode compared with the transverse magnetic (TM) mode of spoof surface plasmon plaritons (SSPPs) excited on corrugated perfect electric conductor surfaces. Theoretical deduction through modal expansion method and simulation results clearly verify that SSMPs share the same dispersion relationship with the SSPPs. It is worth noting that this metamaterial will have more similar properties and potential applications as the SSPPs in large number of areas.

Surface effect theory in binary alloys: surfaces with cut-off

International Nuclear Information System (INIS)

Kumar, V.; Silva, C.E.T.G. da; Moran-Lopez, J.L.

1981-01-01

A surface effect theory in binary alloys which ore ordered with surfaces with cut-off is presented. This theory is based in a model of pair interaction between first neighbours and includes long and short range effects. The (120) surface with sup(-) (110) monoatomic cut-off and terrace in the (110) planes of an alloy with body centered cubic structure is presented as example. Results for the concentrations in all the different surface sites are given. (L.C.) [pt

Surface correlations of hydrodynamic drag for transitionally rough engineering surfaces

Science.gov (United States)

Thakkar, Manan; Busse, Angela; Sandham, Neil

2017-02-01

Rough surfaces are usually characterised by a single equivalent sand-grain roughness height scale that typically needs to be determined from laboratory experiments. Recently, this method has been complemented by a direct numerical simulation approach, whereby representative surfaces can be scanned and the roughness effects computed over a range of Reynolds number. This development raises the prospect over the coming years of having enough data for different types of rough surfaces to be able to relate surface characteristics to roughness effects, such as the roughness function that quantifies the downward displacement of the logarithmic law of the wall. In the present contribution, we use simulation data for 17 irregular surfaces at the same friction Reynolds number, for which they are in the transitionally rough regime. All surfaces are scaled to the same physical roughness height. Mean streamwise velocity profiles show a wide range of roughness function values, while the velocity defect profiles show a good collapse. Profile peaks of the turbulent kinetic energy also vary depending on the surface. We then consider which surface properties are important and how new properties can be incorporated into an empirical model, the accuracy of which can then be tested. Optimised models with several roughness parameters are systematically developed for the roughness function and profile peak turbulent kinetic energy. In determining the roughness function, besides the known parameters of solidity (or frontal area ratio) and skewness, it is shown that the streamwise correlation length and the root-mean-square roughness height are also significant. The peak turbulent kinetic energy is determined by the skewness and root-mean-square roughness height, along with the mean forward-facing surface angle and spanwise effective slope. The results suggest feasibility of relating rough-wall flow properties (throughout the range from hydrodynamically smooth to fully rough) to surface

Surface Habitat Systems

Science.gov (United States)

Kennedy, Kriss J.

2009-01-01

The Surface Habitat Systems (SHS) Focused Investment Group (FIG) is part of the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) effort to provide a focused direction and funding to the various projects that are working on human surface habitat designs and technologies for the planetary exploration missions. The overall SHS-FIG effort focuses on directing and guiding those projects that: 1) develop and demonstrate new surface habitat system concepts, innovations, and technologies to support human exploration missions, 2) improve environmental systems that interact with human habitats, 3) handle and emplace human surface habitats, and 4) focus on supporting humans living and working in habitats on planetary surfaces. The activity areas of the SHS FIG described herein are focused on the surface habitat project near-term objectives as described in this document. The SHS-FIG effort focuses on mitigating surface habitat risks (as identified by the Lunar Surface Systems Project Office (LSSPO) Surface Habitat Element Team; and concentrates on developing surface habitat technologies as identified in the FY08 gap analysis. The surface habitat gap assessment will be updated annually as the surface architecture and surface habitat definition continues to mature. These technologies are mapped to the SHS-FIG Strategic Development Roadmap. The Roadmap will bring to light the areas where additional innovative efforts are needed to support the development of habitat concepts and designs and the development of new technologies to support of the LSSPO Habitation Element development plan. Three specific areas of development that address Lunar Architecture Team (LAT)-2 and Constellation Architecture Team (CxAT) Lunar habitat design issues or risks will be focused on by the SHS-FIG. The SHS-FIG will establish four areas of development that will help the projects prepare in their planning for surface habitat systems development. Those development areas are

Mechanics of curved surfaces, with application to surface-parallel cracks

Science.gov (United States)

Martel, Stephen J.

2011-10-01

The surfaces of many bodies are weakened by shallow enigmatic cracks that parallel the surface. A re-formulation of the static equilibrium equations in a curvilinear reference frame shows that a tension perpendicular to a traction-free surface can arise at shallow depths even under the influence of gravity. This condition occurs if σ11k1 + σ22k2 > ρg cosβ, where k1 and k2 are the principal curvatures (negative if convex) at the surface, σ11 and σ22 are tensile (positive) or compressive (negative) stresses parallel to the respective principal curvature arcs, ρ is material density, g is gravitational acceleration, and β is the surface slope. The curvature terms do not appear in equilibrium equations in a Cartesian reference frame. Compression parallel to a convex surface thus can cause subsurface cracks to open. A quantitative test of the relationship above accounts for where sheeting joints (prominent shallow surface-parallel fractures in rock) are abundant and for where they are scarce or absent in the varied topography of Yosemite National Park, resolving key aspects of a classic problem in geology: the formation of sheeting joints. Moreover, since the equilibrium equations are independent of rheology, the relationship above can be applied to delamination or spalling caused by surface-parallel cracks in many materials.

A Smart Superwetting Surface with Responsivity in Both Surface Chemistry and Microstructure.

Science.gov (United States)

Zhang, Dongjie; Cheng, Zhongjun; Kang, Hongjun; Yu, Jianxin; Liu, Yuyan; Jiang, Lei

2018-03-26

Recently, smart surfaces with switchable wettability have aroused much attention. However, only single surface chemistry or the microstructure can be changed on these surfaces, which significantly limits their wetting performances, controllability, and applications. A new surface with both tunable surface microstructure and chemistry was prepared by grafting poly(N-isopropylacrylamide) onto the pillar-structured shape memory polymer on which multiple wetting states from superhydrophilicity to superhydrophobicity can be reversibly and precisely controlled by synergistically regulating the surface microstructure and chemistry. Meanwhile, based on the excellent controllability, we also showed the application of the surface as a rewritable platform, and various gradient wettings can be obtained. This work presents for the first time a surface with controllability in both surface chemistry and microstructure, which starts some new ideas for the design of novel superwetting materials. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

A Surface Temperature Initiated Closure (STIC) for surface energy balance fluxes

DEFF Research Database (Denmark)

Mallick, Kaniska; Jarvis, Andrew J.; Boegh, Eva

2014-01-01

The use of Penman–Monteith (PM) equation in thermal remote sensing based surface energy balance modeling is not prevalent due to the unavailability of any direct method to integrate thermal data into the PM equation and due to the lack of physical models expressing the surface (or stomatal......) and boundary layer conductances (gS and gB) as a function of surface temperature. Here we demonstrate a new method that physically integrates the radiometric surface temperature (TS) into the PM equation for estimating the terrestrial surface energy balance fluxes (sensible heat, H and latent heat, λ......E). The method combines satellite TS data with standard energy balance closure models in order to derive a hybrid closure that does not require the specification of surface to atmosphere conductance terms. We call this the Surface Temperature Initiated Closure (STIC), which is formed by the simultaneous solution...

'The surface management system' (SuMS) database: a surface-based database to aid cortical surface reconstruction, visualization and analysis

Science.gov (United States)

Dickson, J.; Drury, H.; Van Essen, D. C.

2001-01-01

Surface reconstructions of the cerebral cortex are increasingly widely used in the analysis and visualization of cortical structure, function and connectivity. From a neuroinformatics perspective, dealing with surface-related data poses a number of challenges. These include the multiplicity of configurations in which surfaces are routinely viewed (e.g. inflated maps, spheres and flat maps), plus the diversity of experimental data that can be represented on any given surface. To address these challenges, we have developed a surface management system (SuMS) that allows automated storage and retrieval of complex surface-related datasets. SuMS provides a systematic framework for the classification, storage and retrieval of many types of surface-related data and associated volume data. Within this classification framework, it serves as a version-control system capable of handling large numbers of surface and volume datasets. With built-in database management system support, SuMS provides rapid search and retrieval capabilities across all the datasets, while also incorporating multiple security levels to regulate access. SuMS is implemented in Java and can be accessed via a Web interface (WebSuMS) or using downloaded client software. Thus, SuMS is well positioned to act as a multiplatform, multi-user 'surface request broker' for the neuroscience community.

Imaging near-surface heterogeneities by natural migration of surface waves

KAUST Repository

Liu, Zhaolun

2016-09-06

We demonstrate that near-surface heterogeneities can be imaged by natural migration of backscattered surface waves in common shot gathers. No velocity model is required because the data are migrated onto surface points with the virtual Green\\'s functions computed from the shot gathers. Migrating shot gathers recorded by 2D and 3D land surveys validates the effectiveness of detecting nearsurface heterogeneities by natural migration. The implication is that more accurate hazard maps can be created by migrating surface waves in land surveys.

Surface free energy of polypropylene and polycarbonate solidifying at different solid surfaces

International Nuclear Information System (INIS)

Chibowski, Emil; Terpilowski, Konrad

2009-01-01

Advancing and receding contact angles of water, formamide, glycerol and diiodomethane were measured on polypropylene (PP) and polycarbonate (PC) sample surfaces which solidified at Teflon, glass or stainless steel as matrix surfaces. Then from the contact angle hystereses (CAH) the apparent free energies γ s tot of the surfaces were evaluated. The original PP surface is practically nonpolar, possessing small electron donor interaction (γ s - =1.91mJ/m 2 ), as determined from the advancing contact angles of these liquids. It may result from impurities of the polymerization process. However, it increases up to 8-10 mJ/m 2 for PP surfaces contacted with the solids. The PC surfaces both original and modified show practically the same γ s - =6.56.7mJ/m 2 . No electron acceptor interaction is found on the surfaces. The γ s tot of modified PP and PC surfaces depend on the kind of probe liquid and contacted solid surface. The modified PP γ s tot values determined from CAH of polar liquids are greater than that of original surface and they increase in the sequence: Teflon, glass, stainless steel surface, at which they solidified. No clear dependence is observed between γ s tot and dielectric constant or dipole moment of the polar probe liquids. The changes in γ s tot of the polymer surfaces are due to the polymer nature and changes in its surface structure caused by the structure and force field of the contacting solid. It has been confirmed by AFM images.

Atomic force microscopy analysis of different surface treatments of Ti dental implant surfaces

International Nuclear Information System (INIS)

Bathomarco, R.V.; Solorzano, G.; Elias, C.N.; Prioli, R.

2004-01-01

The surface of commercial unalloyed titanium, used in dental implants, was analyzed by atomic force microscopy. The morphology, roughness, and surface area of the samples, submitted to mechanically-induced erosion, chemical etching and a combination of both, were compared. The results show that surface treatments strongly influence the dental implant physical and chemical properties. An analysis of the length dependence of the implant surface roughness shows that, for scan sizes larger than 50 μm, the average surface roughness is independent of the scanning length and that the surface treatments lead to average surface roughness in the range of 0.37 up to 0.48 μm. It is shown that the implant surface energy is sensitive to the titanium surface area. As the area increases there is a decrease in the surface contact angle

Atomic force microscopy analysis of different surface treatments of Ti dental implant surfaces

Science.gov (United States)

Bathomarco, Ti R. V.; Solorzano, G.; Elias, C. N.; Prioli, R.

2004-06-01

The surface of commercial unalloyed titanium, used in dental implants, was analyzed by atomic force microscopy. The morphology, roughness, and surface area of the samples, submitted to mechanically-induced erosion, chemical etching and a combination of both, were compared. The results show that surface treatments strongly influence the dental implant physical and chemical properties. An analysis of the length dependence of the implant surface roughness shows that, for scan sizes larger than 50 μm, the average surface roughness is independent of the scanning length and that the surface treatments lead to average surface roughness in the range of 0.37 up to 0.48 μm. It is shown that the implant surface energy is sensitive to the titanium surface area. As the area increases there is a decrease in the surface contact angle.

Solid surface vs. liquid surface: nanoarchitectonics, molecular machines, and DNA origami.

Science.gov (United States)

Ariga, Katsuhiko; Mori, Taizo; Nakanishi, Waka; Hill, Jonathan P

2017-09-13

The investigation of molecules and materials at interfaces is critical for the accumulation of new scientific insights and technological advances in the chemical and physical sciences. Immobilization on solid surfaces permits the investigation of different properties of functional molecules or materials with high sensitivity and high spatial resolution. Liquid surfaces also present important media for physicochemical innovation and insight based on their great flexibility and dynamicity, rapid diffusion of molecular components for mixing and rearrangements, as well as drastic spatial variation in the prevailing dielectric environment. Therefore, a comparative discussion of the relative merits of the properties of materials when positioned at solid or liquid surfaces would be informative regarding present-to-future developments of surface-based technologies. In this perspective article, recent research examples of nanoarchitectonics, molecular machines, DNA nanotechnology, and DNA origami are compared with respect to the type of surface used, i.e. solid surfaces vs. liquid surfaces, for future perspectives of interfacial physics and chemistry.

The influence of the surface atomic structure on surface diffusion

International Nuclear Information System (INIS)

Ghaleb, Dominique

1984-03-01

This work represents the first quantitative study of the influence of the surface atomic structure on surface diffusion (in the range: 0.2 Tf up 0.5 Tf; Tf: melting temperature of the substrate). The analysis of our results on a microscopic scale shows low formation and migration energies for adatoms; we can describe the diffusion on surfaces with a very simple model. On (110) surfaces at low temperature the diffusion is controlled by the exchange mechanism; at higher temperature direct jumps of adatoms along the channels contribute also to the diffusion process. (author) [fr

Functionalized polymer film surfaces via surface-initiated atom transfer radical polymerization

International Nuclear Information System (INIS)

Hu, Y.; Li, J.S.; Yang, W.T.; Xu, F.J.

2013-01-01

The ability to manipulate and control the surface properties of polymer films, without altering the substrate properties, is crucial to their wide-spread applications. In this work, a simple one-step method for the direct immobilization of benzyl chloride groups (as the effective atom transfer radical polymerization (ATRP) initiators) on the polymer films was developed via benzophenone-induced coupling of 4-vinylbenzyl chloride (VBC). Polyethylene (PE) and nylon films were selected as examples of polymer films to illustrate the functionalization of film surfaces via surface-initiated ATRP. Functional polymer brushes of (2-dimethylamino)ethyl methacrylate, sodium 4-styrenesulfonate, 2-hydroxyethyl methacrylate and glycidyl methacrylate, as well as their block copolymer brushes, have been prepared via surface-initiated ATRP from the VBC-coupled PE or nylon film surfaces. With the development of a simple approach to the covalent immobilization of ATRP initiators on polymer film surfaces and the inherent versatility of surface-initiated ATRP, the surface functionality of polymer films can be precisely tailored. - Highlights: ► Atom transfer radical polymerization initiators were simply immobilized. ► Different functional polymer brushes were readily prepared. ► Their block copolymer brushes were also readily prepared

Land water storage from space and the geodetic infrastructure

Science.gov (United States)

Cazenave, A.; Larson, K.; Wahr, J.

2009-04-01

In recent years, remote sensing techniques have been increasingly used to monitor components of the water balance of large river basins. By complementing scarce in situ observations and hydrological modelling, space observations have the potential to significantly improve our understanding of hydrological processes at work in river basins and their relationship with climate variability and socio-economic life. Among the remote sensing tools used in land hydrology, several originate from space geodesy and are integral parts of the Global Geodetic Observing System. For example, satellite altimetry is used for systematic monitoring of water levels of large rivers, lakes and floodplains. InSAR allows the detection of surface water change. GRACE-based space gravity offers for the first time the possibility of directly measuring the spatio-temporal variations of the vertically integrated water storage in large river basins. GRACE is also extremely useful for measuring changes in mass of the snow pack in boreal regions. Vertical motions of the ground induced by changes in water storage in aquifers can be measured by both GPS and InSAR. These techniques can also be used to investigate water loading effects. Recently GPS has been used to measure changes in surface soil moisture, which would be important for agriculture, weather prediction, and for calibrationg satellite missions such as SMOS and SMAP. These few examples show that space and ground geodetic infrastructures are increasingly important for hydrological sciences and applications. Future missions like SWOT (Surface Waters Ocean Topography; a wide swath interferometric altimetry mission) and GRACE 2 (space gravimetry mission based on new technology) will provide a new generation of hydrological products with improved precision and resolution.

Surface for dummies

CERN Document Server

Rathbone, Andy

2014-01-01

Make Microsoft's Surface work-and play-just the way you want it to Microsoft's Surface tablet has the features and personality you're looking for, with a robust environment for business computing that doesn't skimp on fun. Surface for Dummies, 2nd Edition explains how Windows 8.1 Pro and Windows RT differ, and helps you decide which Surface model is best for you. Step by step, this book walks you through both the hardware and software features of the Surface, including the touch cover and type cover, Windows RT and Windows 8.1 Pro operating systems, and the coveted Office Home & Student 2013 s

Surface channeling

International Nuclear Information System (INIS)

Sizmann, R.; Varelas, C.

1976-01-01

There is experimental evidence that swift light ions incident at small angles towards single crystalline surfaces can lose an appreciable fraction of their kinetic energy during reflection. It is shown that these projectiles penetrate into the bulk surface region of the crystal. They can travel as channeled particles along long paths through the solid (surface channeling). The angular distribution and the depth history of the re-emerged projectiles are investigated by computer simulations. A considerable fraction of the penetrating projectiles re-emerges from the crystal with constant transverse energy if the angle of incidence is smaller than the critical angle for axial channeling. Analytical formulae are derived based on a diffusion model for surface channeling. A comparison with experimental data exhibits the relevance of the analytical solutions. (Auth.)

Characterizing the effects of regolith surface roughness on photoemission from surfaces in space

Science.gov (United States)

Dove, A.; Horanyi, M.; Wang, X.

2017-12-01

Surfaces of airless bodies and spacecraft in space are exposed to a variety of charging environments. A balance of currents due to plasma bombardment, photoemission, electron and ion emission and collection, and secondary electron emission determines the surface's charge. Photoelectron emission is the dominant charging process on sunlit surfaces in the inner solar system due to the intense solar UV radiation. This can result in a net positive surface potential, with a cloud of photoelectrons immediately above the surface, called the photoelectron sheath. Conversely, the unlit side of the body will charge negatively due the collection of the fast-moving solar wind electrons. The interaction of charged dust grains with these positively and negatively charged surfaces, and within the photoelectron and plasma sheaths may explain the occurrence of dust lofting, levitation and transport above the lunar surface. The surface potential of exposed objects is also dependent on the material properties of their surfaces. Composition and particle size primarily affect the quantum efficiency of photoelectron generation; however, surface roughness can also control the charging process. In order to characterize these effects, we have conducted laboratory experiments to examine the role of surface roughness in generating photoelectrons in dedicated laboratory experiments using solid and dusty surfaces of the same composition (CeO2), and initial comparisons with JSC-1 lunar simulant. Using Langmuir probe measurements, we explore the measured potentials above insulating surfaces exposed to UV and an electric field, and we show that the photoemission current from a dusty surface is largely reduced due to its higher surface roughness, which causes a significant fraction of the emitted photoelectrons to be re-absorbed within the surface. We will discuss these results in context of similar situations on planetary surfaces.

Surface and body waves from surface and underground explosions

International Nuclear Information System (INIS)

Kusubov, A.S.

1976-06-01

The characteristics of surface and ground waves were recorded for surface and underground explosions up to 100 tons and 40 kt in magnitude, respectively, and a preliminary analysis of these results is presented. The experiments were conducted at NTS in the Yucca Flats, Nevada. Ground motions were detected with triaxial geophones along seismic lines extending up to 16 miles from the point of explosions. A comparison of Rayleigh waves generated by surface and underground explosions in the same lake bed is presented indicating a very different behavior of surface and ground waves from the two types of explosions. The magnitude of the transverse wave for surface shots was smaller by a factor of two than its longitudinal counterpart. The dependence of apparent periods on the blast energy was not apparent at a fixed distance from the explosions. Changes in the apparent period with distance for both types of explosion are compared indicating a strong layering effect of the lake bed. The ground motion study was complimented by excavation of cavities generated by the explosions

Surface engineering with ion beams: from self-organized nanostructures to ultra-smooth surfaces

International Nuclear Information System (INIS)

Frost, F.; Ziberi, B.; Schindler, A.; Rauschenbach, B.

2008-01-01

Low-energy ion-beam sputtering, i.e. the removal of atoms from a surface due to the impact of energetic ions or atoms, is an inherent part of numerous surface processing techniques. Besides the actual removal of material, this surface erosion process often results in a pronounced alteration of the surface topography. Under certain conditions, sputtering results in the formation of well-ordered patterns. This self-organized pattern formation is related to a surface instability between curvature-dependent sputtering that roughens the surface and smoothing by different surface relaxation mechanisms. If the evolution of surface topography is dominated by relaxation mechanisms, surface smoothing can occur. In this presentation the current status of self-organized pattern formation and surface smoothing by low-energy ion-beam erosion of Si and Ge is summarized. In detail it will be shown that a multitude of patterns as well as ultra-smooth surfaces can develop, particularly on Si surfaces. Additionally, the most important experimental parameters that control these processes are discussed. Finally, examples are given for the application of low-energy ion beams as a novel approach for passive optical device engineering for many advanced optical applications. (orig.)

Simultaneous retrieval of sea ice thickness and snow depth using concurrent active altimetry and passive L-band remote sensing data

Science.gov (United States)

Zhou, L.; Xu, S.; Liu, J.

2017-12-01

The retrieval of sea ice thickness mainly relies on satellite altimetry, and the freeboard measurements are converted to sea ice thickness (hi) under certain assumptions over snow loading. The uncertain in snow depth (hs) is a major source of uncertainty in the retrieved sea ice thickness and total volume for both radar and laser altimetry. In this study, novel algorithms for the simultaneous retrieval of hi and hs are proposed for the data synergy of L-band (1.4 GHz) passive remote sensing and both types of active altimetry: (1) L-band (1.4GHz) brightness temperature (TB) from Soil Moisture Ocean Salinity (SMOS) satellite and sea ice freeboard (FBice) from radar altimetry, (2) L-band TB data and snow freeboard (FBsnow) from laser altimetry. Two physical models serve as the forward models for the retrieval: L-band radiation model, and the hydrostatic equilibrium model. Verification with SMOS and Operational IceBridge (OIB) data is carried out, showing overall good retrieval accuracy for both sea ice parameters. Specifically, we show that the covariability between hs and FBsnow is crucial for the synergy between TB and FBsnow. Comparison with existing algorithms shows lower uncertainty in both sea ice parameters, and that the uncertainty in the retrieved sea ice thickness as caused by that of snow depth is spatially uncorrelated, with the potential reduction of the volume uncertainty through spatial sampling. The proposed algorithms can be applied to the retrieval of sea ice parameters at basin-scale, using concurrent active and passive remote sensing data based on satellites.

Measuring GNSS ionospheric total electron content at Concordia, and application to L-band radiometers

Directory of Open Access Journals (Sweden)

Vincenzo Romano

2013-06-01

Full Text Available In the framework of the project BIS - Bipolar Ionospheric Scintillation and Total Electron Content Monitoring, the ISACCO-DMC0 and ISACCO-DMC1 permanent monitoring stations were installed in 2008. The principal scope of the stations is to measure the ionospheric total electron content (TEC and to monitor the ionospheric scintillations, using high-sampling-frequency global positioning system (GPS ionospheric scintillation and TEC monitor (GISTM receivers. The disturbances that the ionosphere can induce on the electromagnetic signals emitted by the Global Navigation Satellite System constellations are due to the presence of electron density anomalies in the ionosphere, which are particularly frequent at high latitudes, where the upper atmosphere is highly sensitive to perturbations coming from outer space. With the development of present and future low-frequency space-borne microwave missions (e.g., Soil Moisture and Ocean Salinity [SMOS], Aquarius, and Soil Moisture Active Passive missions, there is an increasing need to estimate the effects of the ionosphere on the propagation of electromagnetic waves that affects satellite measurements. As an example, how the TEC data collected at Concordia station are useful for the calibration of the European Space Agency SMOS data within the framework of an experiment promoted by the European Space Agency (known as DOMEX will be discussed. The present report shows the ability of the GISTM station to monitor ionospheric scintillation and TEC, which indicates that only the use of continuous GPS measurements can provide accurate information on TEC variability, which is necessary for continuous calibration of satellite data.

Biomaterials surface science

CERN Document Server

Taubert, Andreas; Rodriguez-Cabello, José Carlos

2013-01-01

The book provides an overview of the highly interdisciplinary field of surface science in the context of biological and biomedical applications. The covered topics range from micro- and nanostructuring for imparting functionality in a top-down manner to the bottom-up fabrication of gradient surfaces by self-assembly, from interfaces between biomaterials and living matter to smart, stimuli-responsive surfaces, and from cell and surface mechanics to the elucidation of cell-chip interactions in biomedical devices.

Influence of surface roughness on the friction property of textured surface

Directory of Open Access Journals (Sweden)

Yuankai Zhou

2015-02-01

Full Text Available In contrast with dimple textures, surface roughness is a texture at the micro-scale, essentially which will influence the load-bearing capacity of lubricant film. The numerical simulation was carried out to investigate the influence of surface roughness on friction property of textured surface. The lubricant film pressure was obtained using the method of computational fluid dynamics according to geometric model of round dimple, and the renormalization-group k–ε turbulent model was adopted in the computation. The numerical simulation results suggest that there is an optimum dimensionless surface roughness, and near this value, the maximum load-bearing capacity can be achieved. The load-bearing capacity is determined by the surface texture, the surface roughness, and the interaction between them. To get information of friction coefficient, the experiments were conducted. This experiment was used to evaluate the simulation. The experimental results show that for the frequency of 4 and 6 Hz, friction coefficient decreases at first and then increases with decreasing surface roughness, which indicates that there exists the optimum region of surface roughness leading to the best friction reduction effect, and it becomes larger when area fractions increase from 2% to 10%. The experimental results agree well with the simulation results.

Analysis of surface bond lengths reported for chemisorption on metal surfaces

Science.gov (United States)

Mitchell, K. A. R.

1985-01-01

A review is given of bond length information available from the techniques of surface crystallography (particularly with LEED, SEXAFS and photoelectron diffraction) for chemisorption on well-defined surfaces of metals (M). For adsorbed main-group atoms (X), measured X-M interatomic distances for 38 combinations of X and M have been assessed with a bond order-bond length relation in combination with the Schomaker-Stevenson approach for determining single-bond lengths. When the surface bond orders are fixed primarily by the valency of X, this approach appears to provide a simple framework for predicing X-M surface bond lengths. Further, in cases where agreement has been reached from different surface crystallographic techniques, this framework has the potential for assessing refinements to the surface bonding model (e.g. in determining the roles of the effective surface valency of M, and of coordinate bonding and supplementary π bonding between X and M). Preliminary comparisons of structural data are also given for molecular adsorption (CO and ethylidyne) and for the chemisorption of other metal atoms.

Mechanics of active surfaces

Science.gov (United States)

Salbreux, Guillaume; Jülicher, Frank

2017-09-01

We derive a fully covariant theory of the mechanics of active surfaces. This theory provides a framework for the study of active biological or chemical processes at surfaces, such as the cell cortex, the mechanics of epithelial tissues, or reconstituted active systems on surfaces. We introduce forces and torques acting on a surface, and derive the associated force balance conditions. We show that surfaces with in-plane rotational symmetry can have broken up-down, chiral, or planar-chiral symmetry. We discuss the rate of entropy production in the surface and write linear constitutive relations that satisfy the Onsager relations. We show that the bending modulus, the spontaneous curvature, and the surface tension of a passive surface are renormalized by active terms. Finally, we identify active terms which are not found in a passive theory and discuss examples of shape instabilities that are related to active processes in the surface.

Radionuclide transfer onto ground surface in surface water flow, 1

International Nuclear Information System (INIS)

Mukai, Masayuki; Takebe, Shinichi; Komiya, Tomokazu; Kamiyama, Hideo

1991-07-01

Radionuclides migration in ground surface water flow is considered to be one of the important path way in the scenario for environmental migration of radionuclides leaked from low level radioactive waste repository. Simulating the slightly sloped surface on which contaminated solution is flowing downward, testing for radionuclide migration on ground surface had been started. As it's first step, an experiment was carried out under the condition of restricted infiltration in order to elucidate the adsorption behavior of radionuclides onto the loamy soil surface in related with hydraulic conditions. Radionuclides concentration change in effluent solution with time and a concentration distribution of radionuclides adsorbed on the ground surface were obtained from several experimental conditions combining the rate and the duration time of the water flow. The radionuclides concentration in the effluent solution was nearly constant during each experimental period, and was reduced under the condition of lower flow rate. The surface distribution of radionuclides concentration showed two distinctive regions. The one was near the inlet vessel where the concentration was promptly reducing, and the other was following the former where the concentration was nearly constant. The characteristic surface distribution of radionuclides concentration can be explained by a two dimensional diffusion model with a first order adsorption reaction, based on the advection of flow rate distribution in perpendicular direction. (author)

Surface vibrational spectroscopy

International Nuclear Information System (INIS)

Erskine, J.L.

1984-01-01

A brief review of recent studies which combine measurements of surface vibrational energies with lattice dynamical calculations is presented. These results suggest that surface vibrational spectroscopy offers interesting prospects for use as a molecular-level probe of surface geometry, adsorbate bond distances and molecular orientations

Surface functionalization of dopamine coated iron oxide nanoparticles for various surface functionalities

Energy Technology Data Exchange (ETDEWEB)

Sherwood, Jennifer; Xu, Yaolin; Lovas, Kira [Chemical and Biological Engineering, The University of Alabama, Tuscaloosa , AL 35487 (United States); Qin, Ying [Alabama Innovation and Mentoring of Entrepreneurs, The University of Alabama, Tuscaloosa, AL 35487 (United States); Bao, Yuping, E-mail: ybao@eng.ua.edu [Chemical and Biological Engineering, The University of Alabama, Tuscaloosa , AL 35487 (United States)

2017-04-01

We present effective conjugation of four small molecules (glutathione, cysteine, lysine, and Tris(hydroxymethyl)aminomethane) onto dopamine-coated iron oxide nanoparticles. Conjugation of these molecules could improve the surface functionality of nanoparticles for more neutral surface charge at physiological pH and potentially reduce non-specific adsorption of proteins to nanoparticles surfaces. The success of conjugation was evaluated with dynamic light scattering by measuring the surface charge changes and Fourier transform infrared spectroscopy for surface chemistry analysis. The stability of dopamine-coated nanoparticles and the ability of conjugated nanoparticles to reduce the formation of protein corona were evaluated by measuring the size and charge of the nanoparticles in biological medium. This facile conjugation method opens up possibilities for attaching various surface functionalities onto iron oxide nanoparticle surfaces for biomedical applications.

Surface functionalization of dopamine coated iron oxide nanoparticles for various surface functionalities

International Nuclear Information System (INIS)

Sherwood, Jennifer; Xu, Yaolin; Lovas, Kira; Qin, Ying; Bao, Yuping

2017-01-01

We present effective conjugation of four small molecules (glutathione, cysteine, lysine, and Tris(hydroxymethyl)aminomethane) onto dopamine-coated iron oxide nanoparticles. Conjugation of these molecules could improve the surface functionality of nanoparticles for more neutral surface charge at physiological pH and potentially reduce non-specific adsorption of proteins to nanoparticles surfaces. The success of conjugation was evaluated with dynamic light scattering by measuring the surface charge changes and Fourier transform infrared spectroscopy for surface chemistry analysis. The stability of dopamine-coated nanoparticles and the ability of conjugated nanoparticles to reduce the formation of protein corona were evaluated by measuring the size and charge of the nanoparticles in biological medium. This facile conjugation method opens up possibilities for attaching various surface functionalities onto iron oxide nanoparticle surfaces for biomedical applications.

Surface boxplots

KAUST Repository

Genton, Marc G.; Johnson, Christopher; Potter, Kristin; Stenchikov, Georgiy L.; Sun, Ying

2014-01-01

In this paper, we introduce a surface boxplot as a tool for visualization and exploratory analysis of samples of images. First, we use the notion of volume depth to order the images viewed as surfaces. In particular, we define the median image. We use an exact and fast algorithm for the ranking of the images. This allows us to detect potential outlying images that often contain interesting features not present in most of the images. Second, we build a graphical tool to visualize the surface boxplot and its various characteristics. A graph and histogram of the volume depth values allow us to identify images of interest. The code is available in the supporting information of this paper. We apply our surface boxplot to a sample of brain images and to a sample of climate model outputs.

Surface boxplots

KAUST Repository

Genton, Marc G.

2014-01-22

In this paper, we introduce a surface boxplot as a tool for visualization and exploratory analysis of samples of images. First, we use the notion of volume depth to order the images viewed as surfaces. In particular, we define the median image. We use an exact and fast algorithm for the ranking of the images. This allows us to detect potential outlying images that often contain interesting features not present in most of the images. Second, we build a graphical tool to visualize the surface boxplot and its various characteristics. A graph and histogram of the volume depth values allow us to identify images of interest. The code is available in the supporting information of this paper. We apply our surface boxplot to a sample of brain images and to a sample of climate model outputs.

Rumble surfaces

CSIR Research Space (South Africa)

National Institute for Transport and Road

1977-01-01

Full Text Available Rumble surfaces are intermittent short lengths of coarse-textured road surfacings on which vehicle tyres produce a rumbling sound. used in conjunction with appropriate roadsigns and markings, they can reduce accidents on rural roads by alerting...

Comment on 'Surface thermodynamics, surface stress, equations at surfaces and triple lines for deformable bodies'

International Nuclear Information System (INIS)

Gutman, E M

2010-01-01

In a recent publication by Olives (2010 J. Phys.: Condens. Matter 22 085005) he studied 'the thermodynamics and mechanics of the surface of a deformable body, following and refining the general approach of Gibbs' and believed that 'a new definition of the surface stress is given'. However, using the usual way of deriving the equations of Gibbs-Duhem type the author, nevertheless, has fallen into a mathematical discrepancy because he has tried to unite in one equation different thermodynamic systems and 'a new definition of the surface stress' has appeared known in the usual theory of elasticity. (comment)

Water at surfaces with tunable surface chemistries

Science.gov (United States)

Sanders, Stephanie E.; Vanselous, Heather; Petersen, Poul B.

2018-03-01

Aqueous interfaces are ubiquitous in natural environments, spanning atmospheric, geological, oceanographic, and biological systems, as well as in technical applications, such as fuel cells and membrane filtration. Where liquid water terminates at a surface, an interfacial region is formed, which exhibits distinct properties from the bulk aqueous phase. The unique properties of water are governed by the hydrogen-bonded network. The chemical and physical properties of the surface dictate the boundary conditions of the bulk hydrogen-bonded network and thus the interfacial properties of the water and any molecules in that region. Understanding the properties of interfacial water requires systematically characterizing the structure and dynamics of interfacial water as a function of the surface chemistry. In this review, we focus on the use of experimental surface-specific spectroscopic methods to understand the properties of interfacial water as a function of surface chemistry. Investigations of the air-water interface, as well as efforts in tuning the properties of the air-water interface by adding solutes or surfactants, are briefly discussed. Buried aqueous interfaces can be accessed with careful selection of spectroscopic technique and sample configuration, further expanding the range of chemical environments that can be probed, including solid inorganic materials, polymers, and water immiscible liquids. Solid substrates can be finely tuned by functionalization with self-assembled monolayers, polymers, or biomolecules. These variables provide a platform for systematically tuning the chemical nature of the interface and examining the resulting water structure. Finally, time-resolved methods to probe the dynamics of interfacial water are briefly summarized before discussing the current status and future directions in studying the structure and dynamics of interfacial water.

Surface-electronic-state effects in electron emission from the Be(0001) surface

International Nuclear Information System (INIS)

Archubi, C. D.; Gravielle, M. S.; Silkin, V. M.

2011-01-01

We study the electron emission produced by swift protons impinging grazingly on a Be(0001) surface. The process is described within a collisional formalism using the band-structure-based (BSB) approximation to represent the electron-surface interaction. The BSB model provides an accurate description of the electronic band structure of the solid and the surface-induced potential. Within this approach we derive both bulk and surface electronic states, with these latter characterized by a strong localization at the crystal surface. We found that such surface electronic states play an important role in double-differential energy- and angle-resolved electron emission probabilities, producing noticeable structures in the electron emission spectra.

Surface-electronic-state effects in electron emission from the Be(0001) surface

Energy Technology Data Exchange (ETDEWEB)

Archubi, C. D. [Instituto de Astronomia y Fisica del Espacio, casilla de correo 67, sucursal 28, C1428EGA, Buenos Aires (Argentina); Gravielle, M. S. [Instituto de Astronomia y Fisica del Espacio, casilla de correo 67, sucursal 28, C1428EGA, Buenos Aires (Argentina); Departamento de Fisica, Facultad de Ciencias Exactas y Naturales, Universidad de Buenos Aires, Buenos Aires (Argentina); Silkin, V. M. [Donostia International Physics Center, E-20018 San Sebastian (Spain); Departamento de Fisica de Materiales, Facultad de Ciencias Quimicas, Universidad del Pais Vasco, Apartado 1072, E-20080 San Sebastian (Spain); IKERBASQUE, Basque Foundation for Science, E-48011 Bilbao (Spain)

2011-07-15

We study the electron emission produced by swift protons impinging grazingly on a Be(0001) surface. The process is described within a collisional formalism using the band-structure-based (BSB) approximation to represent the electron-surface interaction. The BSB model provides an accurate description of the electronic band structure of the solid and the surface-induced potential. Within this approach we derive both bulk and surface electronic states, with these latter characterized by a strong localization at the crystal surface. We found that such surface electronic states play an important role in double-differential energy- and angle-resolved electron emission probabilities, producing noticeable structures in the electron emission spectra.

Thermal and UV Hydrosilylation of Alcohol-Based Bifunctional Alkynes on Si (111) surfaces: How surface radicals influence surface bond formation.

Science.gov (United States)

Khung, Y L; Ngalim, S H; Scaccabarozi, A; Narducci, D

2015-06-12

Using two different hydrosilylation methods, low temperature thermal and UV initiation, silicon (111) hydrogenated surfaces were functionalized in presence of an OH-terminated alkyne, a CF3-terminated alkyne and a mixed equimolar ratio of the two alkynes. XPS studies revealed that in the absence of premeditated surface radical through low temperature hydrosilylation, the surface grafting proceeded to form a Si-O-C linkage via nucleophilic reaction through the OH group of the alkyne. This led to a small increase in surface roughness as well as an increase in hydrophobicity and this effect was attributed to the surficial etching of silicon to form nanosize pores (~1-3 nm) by residual water/oxygen as a result of changes to surface polarity from the grafting. Furthermore in the radical-free thermal environment, a mix in equimolar of these two short alkynes can achieve a high contact angle of ~102°, comparable to long alkyl chains grafting reported in literature although surface roughness was relatively mild (rms = ~1 nm). On the other hand, UV initiation on silicon totally reversed the chemical linkages to predominantly Si-C without further compromising the surface roughness, highlighting the importance of surface radicals determining the reactivity of the silicon surface to the selected alkynes.

Quantification of total and particulate dimethylsulfoniopropionate (DMSP) in five Bermudian coral species across a depth gradient

Science.gov (United States)

Yost, D. M.; Jones, R.; Rowe, C. L.; Mitchelmore, Carys Louise

2012-06-01

The symbiotic dinoflagellate microalgae of corals ( Symbiodinium spp.) contain high concentrations of dimethylsulfoniopropionate (DMSP), a multifunctional metabolite commonly found in many species of marine algae and dinoflagellates. A photoprotective antioxidant function for DMSP and its breakdown products has often been inferred in algae, but its role(s) in the coral-algal symbiosis remains elusive. To examine potential correlations between environmental and physiological parameters and DMSP, total DMSP (DMSPt, from the host coral and zooxanthellae), particulate DMSP (DMSPp, from the zooxanthellae only), coral surface area, and total protein, as well as zooxanthellae density, chlorophyll concentration, cell volume and genotype (i.e., clade) were measured in five coral species from the Diploria- Montastraea- Porites species complex in Bermuda along a depth gradient of 4, 12, 18, and 24 m. DMSPt concentrations were consistently greater than DMSPp concentrations in all species suggesting the possible translocation of DMSP from symbiont to host. D. labyrinthiformis was notably different from the other corals examined, showing DMSPp and DMSPt increases (per coral surface area or tissue biomass) with increasing water depth. However, overall, there were no consistent depth-related patterns in DMSPp and DMSPt concentrations. Further research, investigating dimethylsulfide (DMS), dimethylsulfoxide, and acrylate levels and DMSP-lyase activity in correlation with other biomarker endpoints that have been shown to be depth (i.e., temperature and light) responsive are needed to substantiate the significance of these findings.

Computer aided surface representation

Energy Technology Data Exchange (ETDEWEB)

Barnhill, R E

1987-11-01

The aims of this research are the creation of new surface forms and the determination of geometric and physical properties of surfaces. The full sweep from constructive mathematics through the implementation of algorithms and the interactive computer graphics display of surfaces is utilized. Both three-dimensional and multi- dimensional surfaces are considered. Particular emphasis is given to the scientific computing solution of Department of Energy problems. The methods that we have developed and that we are proposing to develop allow applications such as: Producing smooth contour maps from measured data, such as weather maps. Modeling the heat distribution inside a furnace from sample measurements. Terrain modeling based on satellite pictures. The investigation of new surface forms includes the topics of triangular interpolants, multivariate interpolation, surfaces defined on surfaces and monotone and/or convex surfaces. The geometric and physical properties considered include contours, the intersection of surfaces, curvatures as a interrogation tool, and numerical integration.

Modelling of surface evolution of rough surface on divertor target in fusion devices

International Nuclear Information System (INIS)

Dai, Shuyu; Liu, Shengguang; Sun, Jizhong; Kirschner, A.; Kawamura, G.; Tskhakaya, D.; Ding, Rui; Luo, Guangnan; Wang, Dezhen

2015-01-01

Highlights: • We study the surface evolution of rough surface on divertor target in fusion devices. • The effects of gyration motion and E × B drift affect 3D angular distribution. • A larger magnetic field angle leads to a reduced net eroded areal density. • The rough surface evolution affects the physical sputtering yield. - Abstract: The 3D Monte-Carlo code SURO has been used to study the surface evolution of rough surface on the divertor target in fusion devices. The edge plasma at divertor region is modelled by the SDPIC code and used as input data for SURO. Coupled with SDPIC, SURO can perform more sophisticated simulations to calculate the local angle and surface evolution of rough surface. The simulation results show that the incident direction of magnetic field, gyration and E × B force has a significant impact on 3D angular distribution of background plasma and accordingly on the erosion of rough surface. The net eroded areal density of rough surface is studied by varying the magnetic field angle with surface normal. The evolution of the microscopic morphology of rough surface can lead to a significant change in the physical sputtering yield

Regularity of Minimal Surfaces

CERN Document Server

Dierkes, Ulrich; Tromba, Anthony J; Kuster, Albrecht

2010-01-01

"Regularity of Minimal Surfaces" begins with a survey of minimal surfaces with free boundaries. Following this, the basic results concerning the boundary behaviour of minimal surfaces and H-surfaces with fixed or free boundaries are studied. In particular, the asymptotic expansions at interior and boundary branch points are derived, leading to general Gauss-Bonnet formulas. Furthermore, gradient estimates and asymptotic expansions for minimal surfaces with only piecewise smooth boundaries are obtained. One of the main features of free boundary value problems for minimal surfaces is t

Super Riemann surfaces

International Nuclear Information System (INIS)

Rogers, Alice

1990-01-01

A super Riemann surface is a particular kind of (1,1)-dimensional complex analytic supermanifold. From the point of view of super-manifold theory, super Riemann surfaces are interesting because they furnish the simplest examples of what have become known as non-split supermanifolds, that is, supermanifolds where the odd and even parts are genuinely intertwined, as opposed to split supermanifolds which are essentially the exterior bundles of a vector bundle over a conventional manifold. However undoubtedly the main motivation for the study of super Riemann surfaces has been their relevance to the Polyakov quantisation of the spinning string. Some of the papers on super Riemann surfaces are reviewed. Although recent work has shown all super Riemann surfaces are algebraic, some areas of difficulty remain. (author)

Rough Surface Contact

Directory of Open Access Journals (Sweden)

T Nguyen

2017-06-01

Full Text Available This paper studies the contact of general rough curved surfaces having nearly identical geometries, assuming the contact at each differential area obeys the model proposed by Greenwood and Williamson. In order to account for the most general gross geometry, principles of differential geometry of surface are applied. This method while requires more rigorous mathematical manipulations, the fact that it preserves the original surface geometries thus makes the modeling procedure much more intuitive. For subsequent use, differential geometry of axis-symmetric surface is considered instead of general surface (although this “general case” can be done as well in Chapter 3.1. The final formulas for contact area, load, and frictional torque are derived in Chapter 3.2.

PREFACE: Nanostructured surfaces

Science.gov (United States)

Palmer, Richard E.

2003-10-01

We can define nanostructured surfaces as well-defined surfaces which contain lateral features of size 1-100 nm. This length range lies well below the micron regime but equally above the Ångstrom regime, which corresponds to the interatomic distances on single-crystal surfaces. This special issue of Journal of Physics: Condensed Matter presents a collection of twelve papers which together address the fabrication, characterization, properties and applications of such nanostructured surfaces. Taken together they represent, in effect, a status report on the rapid progress taking place in this burgeoning area. The first four papers in this special issue have been contributed by members of the European Research Training Network ‘NanoCluster’, which is concerned with the deposition, growth and characterization of nanometre-scale clusters on solid surfaces—prototypical examples of nanoscale surface features. The paper by Vandamme is concerned with the fundamentals of the cluster-surface interaction; the papers by Gonzalo and Moisala address, respectively, the optical and catalytic properties of deposited clusters; and the paper by van Tendeloo reports the application of transmission electron microscopy (TEM) to elucidate the surface structure of spherical particles in a catalyst support. The fifth paper, by Mendes, is also the fruit of a European Research Training Network (‘Micro-Nano’) and is jointly contributed by three research groups; it reviews the creation of nanostructured surface architectures from chemically-synthesized nanoparticles. The next five papers in this special issue are all concerned with the characterization of nanostructured surfaces with scanning tunnelling microscopy (STM) and atomic force microscopy (AFM). The papers by Bolotov, Hamilton and Dunstan demonstrate that the STM can be employed for local electrical measurements as well as imaging, as illustrated by the examples of deposited clusters, model semiconductor structures and real

Superhydrophobic surfaces

Science.gov (United States)

Wang, Evelyn N; McCarthy, Matthew; Enright, Ryan; Culver, James N; Gerasopoulos, Konstantinos; Ghodssi, Reza

2015-03-24

Surfaces having a hierarchical structure--having features of both microscale and nanoscale dimensions--can exhibit superhydrophobic properties and advantageous condensation and heat transfer properties. The hierarchical surfaces can be fabricated using biological nanostructures, such as viruses as a self-assembled nanoscale template.

Ion neutralization at metal surfaces by surface-plasmon excitation

International Nuclear Information System (INIS)

Almulhem, A.A.

1988-01-01

Electron capture by ions scattered from metal surfaces is usually assumed to occur via resonance tunneling or Auger neutralization. A new mechanism is proposed, wherein a surface plasmon is excited during the electron capture. The Fock-Tani transformation is used to transform the Hamiltonian into a form which explicitly contains a term that corresponds to this process. Using this term, the matrix elements are calculated analytically and used to evaluate the transition rate as a function of distance from the surface. Since this is a rearrangement process, the matrix element contains an orthogonalization term. The theory is applied to the scattering of protons from an aluminum surface in which the proton captures an electron into the 1s state. From the results obtained for the transition rate and neutral fractions, it is concluded that this process is important, at least in the low energy region. When the calculations are done with the orthogonalization term in the matrix element neglected, the transition rate and neutral fraction increased appreciably. This shows the importance of this term, and implies that it cannot be neglected as was done in other theories of neutralization at metal surfaces

Net Community Metabolism and Seawater Carbonate Chemistry Scale Non-intuitively with Coral Cover

Directory of Open Access Journals (Sweden)

Heather N. Page

2017-05-01

Full Text Available Coral cover and reef health have been declining globally as reefs face local and global stressors including higher temperature and ocean acidification (OA. Ocean warming and acidification will alter rates of benthic reef metabolism (i.e., primary production, respiration, calcification, and CaCO3 dissolution, but our understanding of community and ecosystem level responses is limited in terms of functional, spatial, and temporal scales. Furthermore, dramatic changes in coral cover and benthic metabolism could alter seawater carbonate chemistry on coral reefs, locally alleviating or exacerbating OA. This study examines how benthic metabolic rates scale with changing coral cover (0–100%, and the subsequent influence of these coral communities on seawater carbonate chemistry based on mesocosm experiments in Bermuda and Hawaii. In Bermuda, no significant differences in benthic metabolism or seawater carbonate chemistry were observed for low (40% and high (80% coral cover due to large variability within treatments. In contrast, significant differences were detected between treatments in Hawaii with benthic metabolic rates increasing with increasing coral cover. Observed increases in daily net community calcification and nighttime net respiration scaled proportionally with coral cover. This was not true for daytime net community organic carbon production rates, which increased the most between 0 and 20% coral cover and then less so between 20 and 100%. Consequently, diel variability in seawater carbonate chemistry increased with increasing coral cover, but absolute values of pH, Ωa, and pCO2 were not significantly different during daytime. To place the results of the mesocosm experiments into a broader context, in situ seawater carbon dioxide (CO2 at three reef sites in Bermuda and Hawaii were also evaluated; reefs with higher coral cover experienced a greater range of diel CO2 levels, complementing the mesocosm results. The results from this study

Computer aided surface representation

Energy Technology Data Exchange (ETDEWEB)

Barnhill, R.E.

1990-02-19

The central research problem of this project is the effective representation, computation, and display of surfaces interpolating to information in three or more dimensions. If the given information is located on another surface, then the problem is to construct a surface defined on a surface''. Sometimes properties of an already defined surface are desired, which is geometry processing''. Visualization of multivariate surfaces is possible by means of contouring higher dimensional surfaces. These problems and more are discussed below. The broad sweep from constructive mathematics through computational algorithms to computer graphics illustrations is utilized in this research. The breadth and depth of this research activity makes this research project unique.

Surface states in crystals with low-index surfaces

International Nuclear Information System (INIS)

Wang Hui-Ping; Tao Rui-Bao

2015-01-01

For most of the conventional crystals with low-index surfaces, the hopping between the nearest neighbor (1NN) crystal planes (CPs) is dominant and the ones from the nNN (2 ≤ n < ∞) CPs are relatively weak, considered as small perturbations. The recent theoretical analysis [1] has demonstrated the absence of surface states at the level of the hopping approximation between the 1NN CPs when the original infinite crystal has the geometric reflection symmetry (GRS) for each CP. Meanwhile, based on the perturbation theory, it has also been shown that small perturbations from the hopping between the nNN (2 ≤ n < ∞) CPs and surface relaxation have no impact on the above conclusion. However, for the crystals with strong intrinsic spin-orbit coupling (SOC), the dominant terms of intrinsic SOC associate with two 1NN bond hoppings. Thus SOC will significantly contribute the hoppings from the 1NN and/or 2NN CPs except the ones within each CP. Here, we will study the effect of the hopping between the 2NN CPs on the surface states in model crystals with three different type structures (Type I: “···–P–P–P–P–···”, Type II: “···–P–Q–P–Q–···” and Type III: “···–P=Q–P=Q–···” where P and Q indicate CPs and the signs “−” and “=” mark the distance between the 1NN CPs). In terms of analytical and numerical calculations, we study the behavior of surface states in three types after the symmetric/asymmetric hopping from the 2NN CPs is added. We analytically prove that the symmetric hopping from the 2NN CPs cannot induce surface states in Type I when each CP has only one electron mode. The numerical calculations also provide strong support for the conclusion, even up to 5NN. However, in general, the coupling from the 2NN CPs (symmetric and asymmetric) is favorable to generate surface states except Type I with single electron mode only. (paper)

Surface chemistry essentials

CERN Document Server

Birdi, K S

2013-01-01

Surface chemistry plays an important role in everyday life, as the basis for many phenomena as well as technological applications. Common examples range from soap bubbles, foam, and raindrops to cosmetics, paint, adhesives, and pharmaceuticals. Additional areas that rely on surface chemistry include modern nanotechnology, medical diagnostics, and drug delivery. There is extensive literature on this subject, but most chemistry books only devote one or two chapters to it. Surface Chemistry Essentials fills a need for a reference that brings together the fundamental aspects of surface chemistry w

Symmetric and asymmetric capillary bridges between a rough surface and a parallel surface.

Science.gov (United States)

Wang, Yongxin; Michielsen, Stephen; Lee, Hoon Joo

2013-09-03

Although the formation of a capillary bridge between two parallel surfaces has been extensively studied, the majority of research has described only symmetric capillary bridges between two smooth surfaces. In this work, an instrument was built to form a capillary bridge by squeezing a liquid drop on one surface with another surface. An analytical solution that describes the shape of symmetric capillary bridges joining two smooth surfaces has been extended to bridges that are asymmetric about the midplane and to rough surfaces. The solution, given by elliptical integrals of the first and second kind, is consistent with a constant Laplace pressure over the entire surface and has been verified for water, Kaydol, and dodecane drops forming symmetric and asymmetric bridges between parallel smooth surfaces. This solution has been applied to asymmetric capillary bridges between a smooth surface and a rough fabric surface as well as symmetric bridges between two rough surfaces. These solutions have been experimentally verified, and good agreement has been found between predicted and experimental profiles for small drops where the effect of gravity is negligible. Finally, a protocol for determining the profile from the volume and height of the capillary bridge has been developed and experimentally verified.

Plasma-surface interactions

International Nuclear Information System (INIS)

Goeckner, M J; Nelson, C T; Sant, S P; Jindal, A K; Joseph, E A; Zhou, B S; Padron-Wells, G; Jarvis, B; Pierce, R; Overzet, L J

2008-01-01

Materials processing is at a crossroads. Currently a large fraction of industrially viable materials processing is via plasmas. Until recently it has been economical to just examine the influence the plasma properties on the desired surface processes and through this ultimately optimize manufacturing. For example, it is well known that the surface processes (etch or deposition), occur in the top few mono-layers of the surface. Thus, in film growth one requires that molecules from the gas-phase land and bond on the surface. However as processing has reached the nano-scale, development of viable processes has become more and more difficult. In part, this is because of all of the free parameters that exist in plasmas. To overcome this economic issue, tool vendors and semiconductor companies have turned to complex computational models of processing plasmas. For those models to work, one requires a through understanding of all of the gas-phase and surface-phase processes that are exhibited in plasmas. Unfortunately, these processes, particularly those at the surface, are not well understood. In this article we describe a viable model of the surface-phase based on cross sections for processes that occur. While originally developed of fluorocarbon systems, the model also appears to be applicable to hydrocarbon systems.

Plasma-surface interactions

Energy Technology Data Exchange (ETDEWEB)

Goeckner, M J; Nelson, C T; Sant, S P; Jindal, A K; Joseph, E A; Zhou, B S; Padron-Wells, G; Jarvis, B; Pierce, R; Overzet, L J [Department of Electrical Engineering, University of Texas at Dallas (United States)], E-mail: goeckner@utdallas.edu

2008-10-01

Materials processing is at a crossroads. Currently a large fraction of industrially viable materials processing is via plasmas. Until recently it has been economical to just examine the influence the plasma properties on the desired surface processes and through this ultimately optimize manufacturing. For example, it is well known that the surface processes (etch or deposition), occur in the top few mono-layers of the surface. Thus, in film growth one requires that molecules from the gas-phase land and bond on the surface. However as processing has reached the nano-scale, development of viable processes has become more and more difficult. In part, this is because of all of the free parameters that exist in plasmas. To overcome this economic issue, tool vendors and semiconductor companies have turned to complex computational models of processing plasmas. For those models to work, one requires a through understanding of all of the gas-phase and surface-phase processes that are exhibited in plasmas. Unfortunately, these processes, particularly those at the surface, are not well understood. In this article we describe a viable model of the surface-phase based on cross sections for processes that occur. While originally developed of fluorocarbon systems, the model also appears to be applicable to hydrocarbon systems.

Surface-ionization field mass-spectrometry studies of nonequilibrium surface ionization

International Nuclear Information System (INIS)

Blashenkov, Nikolai M; Lavrent'ev, Gennadii Ya

2007-01-01

The ionization of polyatomic molecules on tungsten and tungsten oxide surfaces is considered for quasiequilibrium or essentially nonequilibrium conditions (in the latter case, the term nonequilibrium surface ionization is used for adsorbate ionization). Heterogeneous reactions are supposed to proceed through monomolecular decay of polyatomic molecules or fragments of multimolecular complexes. The nonequilibrium nature of these reactions is established. The dependences of the current density of disordered ions on the surface temperature, electric field strength, and ionized particle energy distribution are obtained in analytical form. Heterogeneous dissociation energies, the ionization potentials of radicals, and the magnitude of reaction departure from equilibrium are determined from experimental data, as are energy exchange times between reaction products and surfaces, the number of molecules in molecular complexes, and the number of effective degrees of freedom in molecules and complexes. In collecting the data a new technique relying on surface-ionization field mass-spectrometry was applied. (instruments and methods of investigation)

Direct detection of near-surface faults by migration of back-scattered surface waves

KAUST Repository

Yu, Han; Guo, Bowen; Hanafy, Sherif; Lin, Fan-Chi; Schuster, Gerard T.

2014-01-01

We show that diffraction stack migration can be used to estimate the distribution of near-surface faults. The assumption is that near-surface faults generate detectable back-scattered surface waves from impinging surface waves. The processing steps

Surface freezing of water.

Science.gov (United States)

Pérez-Díaz, J L; Álvarez-Valenzuela, M A; Rodríguez-Celis, F

2016-01-01

Freezing, melting, evaporation and condensation of water are essential ingredients for climate and eventually life on Earth. In the present work, we show how surface freezing of supercooled water in an open container is conditioned and triggered-exclusively-by humidity in air. Additionally, a change of phase is demonstrated to be triggered on the water surface forming surface ice crystals prior to freezing of bulk. The symmetry of the surface crystal, as well as the freezing point, depend on humidity, presenting at least three different types of surface crystals. Humidity triggers surface freezing as soon as it overpasses a defined value for a given temperature, generating a plurality of nucleation nodes. An evidence of simultaneous nucleation of surface ice crystals is also provided.

Surface chemistry theory and applications

CERN Document Server

Bikerman, J J

2013-01-01

Surface Chemistry Theory and Applications focuses on liquid-gas, liquid-liquid, solid-gas, solid-liquid, and solid-solid surfaces. The book first offers information on liquid-gas surfaces, including surface tension, measurement of surface tension, rate of capillarity rise, capillary attraction, bubble pressure and pore size, and surface tension and temperature. The text then ponders on liquid-liquid and solid-gas surfaces. Discussions focus on surface energy of solids, surface roughness and cleanness, adsorption of gases and vapors, adsorption hysteresis, interfacial tension, and interfacial t

PREFACE: Atom-surface scattering Atom-surface scattering

Science.gov (United States)

Miret-Artés, Salvador

2010-08-01

It has been a privilege and a real pleasure to organize this special issue or festschrift in the general field of atom-surface scattering (and its interaction) in honor of J R Manson. This is a good opportunity and an ideal place to express our deep gratitude to one of the leaders in this field for his fundamental and outstanding scientific contributions. J R Manson, or Dick to his friends and colleagues, is one of the founding fathers, together with N Cabrera and V Celli, of the 'Theory of surface scattering and detection of surface phonons'. This is the title of the very well-known first theoretical paper by Dick published in Physical Review Letters in 1969. My first meeting with Dick was around twenty years ago in Saclay. J Lapujoulade organized a small group seminar about selective adsorption resonances in metal vicinal surfaces. We discussed this important issue in surface physics and many other things as if we had always known each other. This familiarity and warm welcome struck me from the very beginning. During the coming years, I found this to be a very attractive aspect of his personality. During my stays in Göttingen, we had the opportunity to talk widely about science and life at lunch or dinner time, walking or cycling. During these nice meetings, he showed, with humility, an impressive cultural background. It is quite clear that his personal opinions about history, religion, politics, music, etc, come from considering and analyzing them as 'open dynamical systems'. In particular, with good food and better wine in a restaurant or at home, a happy cheerful soirée is guaranteed with him, or even with only a good beer or espresso, and an interesting conversation arises naturally. He likes to listen before speaking. Probably not many people know his interest in tractors. He has an incredible collection of very old tractors at home. In one of my visits to Clemson, he showed me the collection, explaining to me in great detail, their technical properties

Surfaces with Natural Ridges

DEFF Research Database (Denmark)

Brander, David; Markvorsen, Steen

2015-01-01

We discuss surfaces with singularities, both in mathematics and in the real world. For many types of mathematical surface, singularities are natural and can be regarded as part of the surface. The most emblematic example is that of surfaces of constant negative Gauss curvature, all of which...

Surface Forces Apparatus measurements of interactions between rough and reactive calcite surfaces.

Science.gov (United States)

Dziadkowiec, Joanna; Javadi, Shaghayegh; Bratvold, Jon Einar; Nilsen, Ola; Røyne, Anja

2018-05-28

Nm-range forces acting between calcite surfaces in water affect macroscopic properties of carbonate rocks and calcite-based granular materials, and are significantly influenced by calcite surface recrystallization. We suggest that the repulsive mechanical effects related to nm-scale surface recrystallization of calcite in water could be partially responsible for the observed decrease of cohesion in calcitic rocks saturated with water. Using the Surface Forces Apparatus (SFA), we simultaneously followed the calcite reactivity and measured the forces in water in two surface configurations: between two rough calcite surfaces (CC), or between rough calcite and a smooth mica surface (CM). We used nm-scale rough, polycrystalline calcite films prepared by Atomic Layer Deposition (ALD). We measured only repulsive forces in CC in CaCO 3 -saturated water, which was related to roughness and possibly to repulsive hydration effects. Adhesive or repulsive forces were measured in CM in CaCO 3 -saturated water depending on calcite roughness, and the adhesion was likely enhanced by electrostatic effects. The pull-off adhesive force in CM became stronger with time and this increase was correlated with a decrease of roughness at contacts, which parameter could be estimated from the measured force-distance curves. That suggested a progressive increase of real contact areas between the surfaces, caused by gradual pressure-driven deformation of calcite surface asperities during repeated loading-unloading cycles. Reactivity of calcite was affected by mass transport across nm to µm-thick gaps between the surfaces. Major roughening was observed only for the smoothest calcite films, where gaps between two opposing surfaces were nm-thick over µm-sized areas, and led to force of crystallization that could overcome confining pressures of the order of MPa. Any substantial roughening of calcite caused a significant increase of the repulsive mechanical force contribution.

On rationally supported surfaces

DEFF Research Database (Denmark)

Gravesen, Jens; Juttler, B.; Sir, Z.

2008-01-01

We analyze the class of surfaces which are equipped with rational support functions. Any rational support function can be decomposed into a symmetric (even) and an antisymmetric (odd) part. We analyze certain geometric properties of surfaces with odd and even rational support functions....... In particular it is shown that odd rational support functions correspond to those rational surfaces which can be equipped with a linear field of normal vectors, which were discussed by Sampoli et al. (Sampoli, M.L., Peternell, M., Juttler, B., 2006. Rational surfaces with linear normals and their convolutions...... with rational surfaces. Comput. Aided Geom. Design 23, 179-192). As shown recently, this class of surfaces includes non-developable quadratic triangular Bezier surface patches (Lavicka, M., Bastl, B., 2007. Rational hypersurfaces with rational convolutions. Comput. Aided Geom. Design 24, 410426; Peternell, M...

Polaron-Driven Surface Reconstructions

Directory of Open Access Journals (Sweden)

Michele Reticcioli

2017-09-01

Full Text Available Geometric and electronic surface reconstructions determine the physical and chemical properties of surfaces and, consequently, their functionality in applications. The reconstruction of a surface minimizes its surface free energy in otherwise thermodynamically unstable situations, typically caused by dangling bonds, lattice stress, or a divergent surface potential, and it is achieved by a cooperative modification of the atomic and electronic structure. Here, we combined first-principles calculations and surface techniques (scanning tunneling microscopy, non-contact atomic force microscopy, scanning tunneling spectroscopy to report that the repulsion between negatively charged polaronic quasiparticles, formed by the interaction between excess electrons and the lattice phonon field, plays a key role in surface reconstructions. As a paradigmatic example, we explain the (1×1 to (1×2 transition in rutile TiO_{2}(110.

Approximation by Cylinder Surfaces

DEFF Research Database (Denmark)

Randrup, Thomas

1997-01-01

We present a new method for approximation of a given surface by a cylinder surface. It is a constructive geometric method, leading to a monorail representation of the cylinder surface. By use of a weighted Gaussian image of the given surface, we determine a projection plane. In the orthogonal...

Direct detection of near-surface faults by migration of back-scattered surface waves

KAUST Repository

Yu, Han

2014-08-05

We show that diffraction stack migration can be used to estimate the distribution of near-surface faults. The assumption is that near-surface faults generate detectable back-scattered surface waves from impinging surface waves. The processing steps are to isolate the back-scattered surface waves, and then migrate them by diffraction migration using the surface wave velocity as the migration velocity. Instead of summing events along trial quasi-hyperbolas, surface wave migration sums events along trial quasi-linear trajectories that correspond to the moveout of back-scattered surface waves. A deconvolution filter derived from the data can be used to collapse a dispersive arrival into a non-dispersive event. Results with synthetic data and field records validate the feasibility of this method. Applying this method to USArray data or passively recorded exploration data might open new opportunities in mapping tectonic features over the extent of the array.

Effect of Surface Treatment on the Surface Characteristics of AISI 316L Stainless Steel

Science.gov (United States)

Trigwell, Steve; Selvaduray, Guna

2005-01-01

The ability of 316L stainless steel to maintain biocompatibility, which is dependent upon the surface characteristics, is critical to its effectiveness as an implant material. The surfaces of mechanically polished (MP), electropolished (EP) and plasma treated 316L stainless steel coupons were characterized by X-ray Photoelectron Spectroscopy (XPS) and Auger Electron Spectroscopy (AES) for chemical composition, Atomic Force Microscopy for surface roughness, and contact angle measurements for critical surface tension. All surfaces had a Ni concentration that was significantly lower than the bulk concentration of -43%. The Cr content of the surface was increased significantly by electropolishing. The surface roughness was also improved significantly by electropolishing. Plasma treatment had the reverse effect - the surface Cr content was decreased. It was also found that the Cr and Fe in the surface exist in both the oxide and hydroxide states, with the ratios varying according to surface treatment.

Workbench surface editor of brain cortical surface

Science.gov (United States)

Dow, Douglas E.; Nowinski, Wieslaw L.; Serra, Luis

1996-04-01

We have developed a 3D reach-in tool to manually reconstruct 3D cortical surface patches from 2D brain atlas images. The first application of our cortex editor is building 3D functional maps, specifically Brodmann's areas. This tool may also be useful in clinical practice to adjust incorrectly mapped atlas regions due to the deforming effect of lesions. The cortex editor allows a domain expert to control the correlation of control points across slices. Correct correlation has been difficult for 3D reconstruction algorithms because the atlas slices are far apart and because of the complex topology of the cortex which differs so much from slice to slice. Also, higher precision of the resulting surfaces is demanded since these define 3D brain atlas features upon which future stereotactic surgery may be based. The cortex editor described in this paper provides a tool suitable for a domain expert to use in defining the 3D surface of a Brodmann's area.

Surface topography and morphology characterization of PIII irradiated silicon surface

International Nuclear Information System (INIS)

Sharma, Satinder K.; Barthwal, Sumit

2008-01-01

The effect of plasma immersion ion implantation (PIII) treatment on silicon surfaces was investigated by micro-Raman and atomic force microscopy (AFM) technique. The surface damage was given by the implantation of carbon, nitrogen, oxygen and argon ions using an inductively coupled plasma (ICP) source at low pressure. AFM studies show that surface topography of the PIII treated silicon wafers depend on the physical and chemical nature of the implanted species. Micro-Raman spectra indicate that the significant reduction of intensity of Raman peak after PIII treatment. Plasma immersion ion implantation is a non-line-of-sight ion implantation method, which allows 3D treatment of materials. Therefore, PIII based surface modification and plasma immersion ion deposition (PIID) coatings are applied in a wide range of situations.

Adsorption of surface functionalized silica nanoparticles onto mineral surfaces and decane/water interface

International Nuclear Information System (INIS)

Metin, Cigdem O.; Baran, Jimmie R.; Nguyen, Quoc P.

2012-01-01

The adsorption of silica nanoparticles onto representative mineral surfaces and at the decane/water interface was studied. The effects of particle size (the mean diameters from 5 to 75 nm), concentration and surface type on the adsorption were studied in detail. Silica nanoparticles with four different surfaces [unmodified, surface modified with anionic (sulfonate), cationic (quaternary ammonium (quat)) or nonionic (polyethylene glycol (PEG)) surfactant] were used. The zeta potential of these silica nanoparticles ranges from −79.8 to 15.3 mV. The shape of silica particles examined by a Hitachi-S5500 scanning transmission electron microscope (STEM) is quite spherical. The adsorption of all the nanoparticles (unmodified or surface modified) on quartz and calcite surfaces was found to be insignificant. We used interfacial tension (IFT) measurements to investigate the adsorption of silica nanoparticles at the decane/water interface. Unmodified nanoparticles or surface modified ones with sulfonate or quat do not significantly affect the IFT of the decane/water interface. It also does not appear that the particle size or concentration influences the IFT. However, the presence of PEG as a surface modifying material significantly reduces the IFT. The PEG surface modifier alone in an aqueous solution, without the nanoparticles, yields the same IFT reduction for an equivalent PEG concentration as that used for modifying the surface of nanoparticles. Contact angle measurements of a decane droplet on quartz or calcite plate immersed in water (or aqueous nanoparticle dispersion) showed a slight change in the contact angle in the presence of the studied nanoparticles. The results of contact angle measurements are in good agreement with experiments of adsorption of nanoparticles on mineral surfaces or decane/water interface. This study brings new insights into the understanding and modeling of the adsorption of surface-modified silica nanoparticles onto mineral surfaces and

Ruled Laguerre minimal surfaces

KAUST Repository

Skopenkov, Mikhail; Pottmann, Helmut; Grohs, Philipp

2011-01-01

A Laguerre minimal surface is an immersed surface in ℝ 3 being an extremal of the functional ∫ (H 2/K-1)dA. In the present paper, we prove that the only ruled Laguerre minimal surfaces are up to isometry the surfaces ℝ (φλ) = (Aφ, Bφ, Cφ + D cos 2φ

Fabrication of a bionic microstructure on a C/SiC brake lining surface: Positive applications of surface defects for surface wetting control

Science.gov (United States)

Wu, M. L.; Ren, C. Z.; Xu, H. Z.; Zhou, C. L.

2018-05-01

The material removal processes generate interesting surface topographies, unfortunately, that was usually considered to be surface defects. To date, little attention has been devoted to the positive applications of these interesting surface defects resulted from laser ablation to improve C/SiC surface wettability. In this study, the formation mechanism behind surface defects (residual particles) is discussed first. The results showed that the residual particles with various diameters experienced regeneration and migration, causing them to accumulate repeatedly. The effective accumulation of these residual particles with various diameters provides a new method about fabricating bionic microstructures for surface wetting control. The negligible influence of ablation processes on the chemical component of the subsurface was studied by comparing the C-O-Si weight percentage at the C/SiC subsurface. A group of microstructures were fabricated under different laser trace and different laser parameters. Surface wettability experimental results for different types of microstructures were compared. The results showed that the surface wettability increased as the laser scanning speed decreased. The surface wettability increased with the density of the laser scanning trace. We also demonstrated the application of optimized combination of laser parameters and laser trace to simulate a lotus leaf's microstructure on C/SiC surfaces. The parameter selection depends on the specific material properties.

Compact polarimetric synthetic aperture radar for monitoring soil moisture condition

Science.gov (United States)

Merzouki, A.; McNairn, H.; Powers, J.; Friesen, M.

2017-12-01

Coarse resolution soil moisture maps are currently operationally delivered by ESA's SMOS and NASA's SMAP passive microwaves sensors. Despite this evolution, operational soil moisture monitoring at the field scale remains challenging. A number of factors contribute to this challenge including the complexity of the retrieval that requires advanced SAR systems with enhanced temporal revisit capabilities. Since the launch of RADARSAT-2 in 2007, Agriculture and Agri-Food Canada (AAFC) has been evaluating the accuracy of these data for estimating surface soil moisture. Thus, a hybrid (multi-angle/multi-polarization) retrieval approach was found well suited for the planned RADARSAT Constellation Mission (RCM) considering the more frequent relook expected with the three satellite configuration. The purpose of this study is to evaluate the capability of C-band CP data to estimate soil moisture over agricultural fields, in anticipation of the launch of RCM. In this research we introduce a new CP approach based on the IEM and simulated RCM CP mode intensities from RADARSAT-2 images acquired at different dates. The accuracy of soil moisture retrieval from the proposed multi-polarization and hybrid methods will be contrasted with that from a more conventional quad-pol approach, and validated against in situ measurements by pooling data collected over AAFC test sites in Ontario, Manitoba and Saskatchewan, Canada.

Enhancing Performance and Uniformity of Perovskite Solar Cells via a Solution-Processed C70 Interlayer for Interface Engineering.

Science.gov (United States)

Zhou, Ya-Qing; Wu, Bao-Shan; Lin, Guan-Hua; Li, Yang; Chen, Di-Chun; Zhang, Peng; Yu, Ming-Yu; Zhang, Bin-Bin; Yun, Da-Qin

2017-10-04

Although some kinds of semiconductor metal oxides (SMOs) have been applied as electron selective layers (ESLs) for planar perovskite solar cells (PSCs), electron transfer is still limited by low electron mobility and defect film formation of SMO ESLs fabricated via low-temperature solution process. Herein, the C 70 interlayer between TiO 2 and (HC(NH 2 ) 2 PbI 3 ) x (CH 3 NH 3 PbCl 3 ) 1-x is prepared by spin-coating and low-temperature annealing for planar n-i-p PSCs. The resultant TiO 2 /C 70 ESL shows good surface morphology, efficient electron extraction, and facilitation of high-quality perovskite film formation, which can be attributed to the suitable nanosize and the superior electronic property of C 70 molecules. In comparison with pristine TiO 2 -based PSCs, the efficiency and hysteresis index are, respectively, enhanced 28% and reduced 76% by adding the C 70 interlayer between TiO 2 and perovskite on the basis of statistical data of more than 50 cells. With the main advantages of low-temperature process and optimized interface, the champion efficiency of PSCs on flexible substrates could exceed 12% in contrast with the above 18% on rigid substrate.

Enhanced lithium storage performances of hierarchical hollow MoS₂ nanoparticles assembled from nanosheets.

Science.gov (United States)

Wang, Meng; Li, Guangda; Xu, Huayun; Qian, Yitai; Yang, Jian

2013-02-01

MoS(2), because of its layered structure and high theoretical capacity, has been regarded as a potential candidate for electrode materials in lithium secondary batteries. But it suffers from the poor cycling stability and low rate capability. Here, hierarchical hollow nanoparticles of MoS(2) nanosheets with an increased interlayer distance are synthesized by a simple solvothermal reaction at a low temperature. The formation of hierarchical hollow nanoparticles is based on the intermediate, K(2)NaMoO(3)F(3), as a self-sacrificed template. These hollow nanoparticles exhibit a reversible capacity of 902 mA h g(-1) at 100 mA g(-1) after 80 cycles, much higher than the solid counterpart. At a current density of 1000 mA g(-1), the reversible capacity of the hierarchical hollow nanoparticles could be still maintained at 780 mAh g(-1). The enhanced lithium storage performances of the hierarchical hollow nanoparticles in reversible capacities, cycling stability and rate performances can be attributed to their hierarchical surface, hollow structure feature and increased layer distance of S-Mo-S. Hierarchical hollow nanoparticles as an ensemble of these features, could be applied to other electrode materials for the superior electrochemical performance.

The consecutive dry days to trigger rainfall over West Africa

Science.gov (United States)

Lee, J. H.

2018-01-01

In order to resolve contradictions in addressing a soil moisture-precipitation feedback mechanism over West Africa and to clarify the impact of antecedent soil moisture on subsequent rainfall evolution, we first validated various data sets (SMOS satellite soil moisture observations, NOAH land surface model, TRMM rainfall, CMORPH rainfall and HadGEM climate models) with the Analyses Multidisciplinaires de la Mousson Africaine (AMMA) field campaign data. Based on this analysis, it was suggested that biases of data sets might cause contradictions in studying mechanisms. Thus, by taking into account uncertainties in data, it was found that the approach of consecutive dry days (i.e. a relative comparison of time-series) showed consistency across various data sets, while the direct comparison approach for soil moisture state and rainfall did not. Thus, it was discussed that it may be difficult to directly relate rain with soil moisture as the absolute value, however, it may be reasonable to compare a temporal progress of the variables. Based upon the results consistently showing a positive relationship between the consecutive dry days and rainfall, this study supports a negative feedback often neglected by climate model structure. This approach is less sensitive to interpretation errors arising from systematic errors in data sets, as this measures a temporal gradient of soil moisture state.

Surface mining

Science.gov (United States)

Robert Leopold; Bruce Rowland; Reed Stalder

1979-01-01

The surface mining process consists of four phases: (1) exploration; (2) development; (3) production; and (4) reclamation. A variety of surface mining methods has been developed, including strip mining, auger, area strip, open pit, dredging, and hydraulic. Sound planning and design techniques are essential to implement alternatives to meet the myriad of laws,...

Estimation of surface absorptivity in laser surface heating process with experimental data

International Nuclear Information System (INIS)

Chen, H-T; Wu, X-Y

2006-01-01

This study applies a hybrid technique of the Laplace transform and finite-difference methods in conjunction with the least-squares method and experimental temperature data inside the test material to predict the unknown surface temperature, heat flux and absorptivity for various surface conditions in the laser surface heating process. In this study, the functional form of the surface temperature is unknown a priori and is assumed to be a function of time before performing the inverse calculation. In addition, the whole time domain is divided into several analysis sub-time intervals and then these unknown estimates on each analysis interval can be predicted. In order to show the accuracy of the present inverse method, comparisons are made among the present estimates, direct results and previous results, showing that the present estimates agree with the direct results for the simulated problem. However, the present estimates of the surface absorptivity deviate slightly from previous estimated results under the assumption of constant thermal properties. The effect of the surface conditions on the surface absorptivity and temperature is not negligible

Surface Modification of α-Fe Metal Particles by Chemical Surface Coating

Institute of Scientific and Technical Information of China (English)

无

2003-01-01

The structure of α-Fe metal magnetic recording particles coated with silane coupling agents have been studied by TEM, FT-IR, EXAFS, Mossbauer. The results show that a close, uniform, firm and ultra thin layer, which is beneficial to the magnetic and chemical stability, has been formed by the cross-linked chemical bond Si-O-Si. And the organic molecule has chemically bonded to the particle surface, which has greatly affected the surface Fe atom electronic structure. Furthermore, the covalent bond between metal particle surface and organic molecule has obvious effect on the near edge structure of the surface Fe atoms.

Couple of biomimetic surfaces with different morphologies for remanufacturing nonuniform wear rail surface

Science.gov (United States)

Sui, Qi; Zhou, Hong; Yang, Lin; Zhang, Haifeng; Feng, Li; Zhang, Peng

2018-02-01

In this work, biomimetic laser treatment was performed on repairing and remanufacturing the nonuniform worn rail surface. The wearing depth distribution of three work regions of a failure rail surface was discussed, and different thickness hardening layers with different microstructure, microhardness and wear resistances were detected from the worm surfaces. Varying wear resistances of the surfaces with different biomimetic morphologies were obtained by biomimetic laser treatments, and the corresponding effect on the lubrication sliding wear of treated and untreated surfaces were studied for comparative study. In addition, the relationship between wear resistance and the spacing of units was also provided, which can lay the important theoretical foundation for avoiding the wear resistance of the serious worn surface is less than that of the slight worn surface in the future practical applications.

Thermodynamics and structure of liquid surfaces investigated directly with surface analytical tools

Energy Technology Data Exchange (ETDEWEB)

Andersson, Gunther [Flinders Univ., Adelaide, SA (Australia). Centre for NanoScale Science and Technology; Morgner, Harald [Leipzig Univ. (Germany). Wilhelm Ostwald Inst. for Physical and Theoretical Chemistry

2017-06-15

Measuring directly the composition, the distribution of constituents as function of the depth and the orientation of molecules at liquid surfaces is essential for determining physicochemical properties of liquid surfaces. While the experimental tools that have been developed for analyzing solid surfaces can in principal be applied to liquid surfaces, it turned out that they had to be adjusted to the particular challenges imposed by liquid samples, e.g. by the unavoidable vapor pressure and by the mobility of the constituting atoms/molecules. In the present work it is shown, how electron spectroscopy and ion scattering spectroscopy have been used for analyzing liquid surfaces. The emphasis of this review is on using the structural information gained for determining the physicochemical properties of liquid surfaces. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Low surface brightness galaxies in the Fornax Cluster: automated galaxy surface photometry

International Nuclear Information System (INIS)

Davies, J.I.; Phillipps, S.; Disney, M.J.

1988-01-01

A sample is presented of low surface brightness galaxies (with extrapolated central surface brightness fainter than 22.0 Bμ) in the Fornax Cluster region which has been measured by the APM machine. Photometric parameters, namely profile shape, scale length, central brightness and total magnitude, are derived for the sample galaxies and correlations between the parameters of low surface brightness dwarf galaxies are discussed, with particular reference to the selection limits. Contrary to previous authors we find no evidence for a luminosity-surface brightness correlation in the sense of lower surface brightness galaxies having lower luminosities and scale sizes. In fact, the present data suggest that it is the galaxies with the largest scale lengths which are more likely to be of very low surface brightness. In addition, the larger scale length galaxies occur preferentially towards the centre of the Cluster. (author)

Structure of stable degeneration of K3 surfaces into pairs of rational elliptic surfaces

Science.gov (United States)

Kimura, Yusuke

2018-03-01

F-theory/heterotic duality is formulated in the stable degeneration limit of a K3 fibration on the F-theory side. In this note, we analyze the structure of the stable degeneration limit. We discuss whether stable degeneration exists for pairs of rational elliptic surfaces. We demonstrate that, when two rational elliptic surfaces have an identical complex structure, stable degeneration always exists. We provide an equation that systematically describes the stable degeneration of a K3 surface into a pair of isomorphic rational elliptic surfaces. When two rational elliptic surfaces have different complex structures, whether their sum glued along a smooth fiber admits deformation to a K3 surface can be determined by studying the structure of the K3 lattice. We investigate the lattice theoretic condition to determine whether a deformation to a K3 surface exists for pairs of extremal rational elliptic surfaces. In addition, we discuss the configurations of singular fibers under stable degeneration. The sum of two isomorphic rational elliptic surfaces glued together admits a deformation to a K3 surface, the singular fibers of which are twice that of the rational elliptic surface. For special situations, singular fibers of the resulting K3 surface collide and they are enhanced to a fiber of another type. Some K3 surfaces become attractive in these situations. We determine the complex structures and the Weierstrass forms of these attractive K3 surfaces. We also deduce the gauge groups in F-theory compactifications on these attractive K3 surfaces times a K3. E 6, E 7, E 8, SU(5), and SO(10) gauge groups arise in these compactifications.

In-situ surface hardening of cast iron by surface layer metallurgy

International Nuclear Information System (INIS)

Fischer, Sebastian F.; Muschna, Stefan; Bührig-Polaczek, Andreas; Bünck, Matthias

2014-01-01

Abrasive wear is a serious problem in many cast iron castings used in industry. To minimize failure and repair of these components, different strategies exist to improve their surface microhardness thus enhancing their wear resistance. However, most of these methods lead to very brittle and/or expensive castings. In the current work a new method for surface hardening is presented which utilizes surface layer metallurgy to generate in-situ a boron-enriched white cast iron surface layer with a high microhardness on a gray cast iron casting. To do this, sand molds are coated with a ferroboron suspension and cast with a cast iron melt. After solidification, a 100–900 µm thick layer of boron-enriched ledeburite is formed on the surface of the casting which produces an increase in the average microhardness from 284 HV 0.1 ±52 HV 0.1 to 505 HV 0.1 ±87 HV 0.1 . Analyses of the samples' core reveal a typical cast iron microstructure which leads to the conclusion that the coating mainly affects the castings' surface. By varying the grain size of the ferroboron powder in the coatings, it is shown that a powder size ≤100 µm is most suitable to create a boron-enriched ledeburite surface layer possessing high hardness values

Radioactive surface contamination monitors

International Nuclear Information System (INIS)

Aoyama, Kei; Minagoshi, Atsushi; Hasegawa, Toru

1994-01-01

To reduce radiation exposure and prevent contamination from spreading, each nuclear power plant has established a radiation controlled area. People and articles out of the controlled area are checked for the surface contamination of radioactive materials with surface contamination monitors. Fuji Electric has repeatedly improved these monitors on the basis of user's needs. This paper outlines typical of a surface contamination monitor, a personal surface contamination monitor, an article surface contamination monitor and a laundry monitor, and the whole-body counter of an internal contamination monitor. (author)

Anodized dental implant surface

Directory of Open Access Journals (Sweden)

Sunil Kumar Mishra

2017-01-01

Full Text Available Purpose: Anodized implants with moderately rough surface were introduced around 2000. Whether these implants enhanced biologic effect to improve the environment for better osseointegration was unclear. The purpose of this article was to review the literature available on anodized surface in terms of their clinical success rate and bone response in patients till now. Materials and Methods: A broad electronic search of MEDLINE and PubMed databases was performed. A focus was made on peer-reviewed dental journals. Only articles related to anodized implants were included. Both animal and human studies were included. Results: The initial search of articles resulted in 581 articles on anodized implants. The initial screening of titles and abstracts resulted in 112 full-text papers; 40 animal studies, 16 studies on cell adhesion and bacterial adhesion onto anodized surfaced implants, and 47 human studies were included. Nine studies, which do not fulfill the inclusion criteria, were excluded. Conclusions: The long-term studies on anodized surface implants do favor the surface, but in most of the studies, anodized surface is compared with that of machined surface, but not with other surfaces commercially available. Anodized surface in terms of clinical success rate in cases of compromised bone and immediately extracted sockets has shown favorable success.

Antibacterial Au nanostructured surfaces

Science.gov (United States)

Wu, Songmei; Zuber, Flavia; Brugger, Juergen; Maniura-Weber, Katharina; Ren, Qun

2016-01-01

We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all the Au nanostructures, regardless their shapes, exhibited similar excellent antibacterial properties. A comparison of live cells attached to nanotopographic surfaces showed that the number of live S. aureus cells was flat and rough reference surfaces. Our micro/nanofabrication process is a scalable approach based on cost-efficient self-organization and provides potential for further developing functional surfaces to study the behavior of microbes on nanoscale topographies.We present here a technological platform for engineering Au nanotopographies by templated electrodeposition on antibacterial surfaces. Three different types of nanostructures were fabricated: nanopillars, nanorings and nanonuggets. The nanopillars are the basic structures and are 50 nm in diameter and 100 nm in height. Particular arrangement of the nanopillars in various geometries formed nanorings and nanonuggets. Flat surfaces, rough substrate surfaces, and various nanostructured surfaces were compared for their abilities to attach and kill bacterial cells. Methicillin-resistant Staphylococcus aureus, a Gram-positive bacterial strain responsible for many infections in health care system, was used as the model bacterial strain. It was found that all

Bacterial resistance of self-assembled surfaces using PPOm-b-PSBMAn zwitterionic copolymer - concomitant effects of surface topography and surface chemistry on attachment of live bacteria.

Science.gov (United States)

Hsiao, Sheng-Wen; Venault, Antoine; Yang, Hui-Shan; Chang, Yung

2014-06-01

Three well-defined diblock copolymers made of poly(sulfobetaine methacrylate) (poly(SBMA)) and poly(propylene oxide) (PPO) groups were synthesized by atom transfer radical polymerization (ATRP) method. They were physically adsorbed onto three types of surfaces having different topography, including smooth flat surface, convex surface, and indented surface. Chemical state of surfaces was characterized by XPS while the various topographies were examined by SEM and AFM. Hydrophilicity of surfaces was dependent on both the surface chemistry and the surface topography, suggesting that orientation of copolymer brushes can be tuned in the design of surfaces aimed at resisting bacterial attachment. Escherichia coli, Staphylococcus epidermidis, Streptococcus mutans and Escherichia coli with green fluorescent protein (E. coli GFP) were used in bacterial tests to assess the resistance to bacterial attachment of poly(SBMA)-covered surfaces. Results highlighted a drastic improvement of resistance to bacterial adhesion with the increasing of poly(SBMA) to PPO ratio, as well as an important effect of surface topography. The chemical effect was directly related to the length of the hydrophilic moieties. When longer, more water could be entrapped, leading to improved anti-bacterial properties. The physical effect impacted on the orientation of the copolymer brushes, as well as on the surface contact area available. Convex surfaces as well as indented surfaces wafer presented the best resistance to bacterial adhesion. Indeed, bacterial attachment was more importantly reduced on these surfaces compared with smooth surfaces. It was explained by the non-orthogonal orientation of copolymer brushes, resulting in a more efficient surface coverage of zwitterionic molecules. This work suggests that not only the control of surface chemistry is essential in the preparation of surfaces resisting bacterial attachment, but also the control of surface topography and orientation of antifouling

SMAP Salinity Artifacts Associated With Presence of Rain

Science.gov (United States)

Jacob, M. M.; Santos-Garcia, A.; Jones, L.

2016-02-01

The Soil Moisture Active Passive (SMAP) satellite carries an L-band radiometer, which measures sea surface salinity (SSS) over a swath of 1000 km @ 40 km resolution. SMAP can extend the Aquarius (AQ) salinity data record with improved temporal/spatial sampling. Previous studies [see references] have demonstrated significant differences between satellite and in-situ salinity measurements during rain. In the presence of precipitation, salinity stratification exists near the sea surface, which nullifies the presumption of a well-mixed salinity. In general, these salinity gradients last only a few hours and the upper layer becomes slightly fresher in salinity. This paper describes the Rain Impact Model (RIM) that simulates the effects of rain accumulation on the SSS [Santos-Garcia et al., 2014] applied to SMAP. This model incorporates rainfall information for the previous 24 hours to the measurement sample (in this case SMAP) and uses as initialization the Hybrid Coordinate Ocean Model (HYCOM) data. Given the better resolution of SMAP, the goal of this paper is to continue the analysis previously done with AQ to better understand the effects of the instantaneous and accumulated rain on the salinity measurements. Boutin, J., N. Martin, G. Reverdin, X. Yin, and F. Gaillard (2013), Sea surface freshening inferred from SMOS and ARGO salinity: Impact of rain, Ocean Sci., 9(1), 183-192, doi:10.5194/os-9-183-2013. Santos-Garcia, A., M. Jacob, L. Jones, W. Asher, Y. Hejazin, H. Ebrahimi, and M. Rabolli (2014), Investigation of rain effects on Aquarius Sea Surface Salinity measurements, J. Geophys. Res. Oceans, 119, 7605-7624, doi:10.1002/2014JC010137. Tang, W., S.H Yueh, A. Hayashi, A.G. Fore, W.L. Jones, A. Santos-Garcia, and M.M. Jacob, (2015), Rain-Induced Near Surface Salinity Stratification and Rain Roughness Correction for Aquarius SSS Retrieval, in Selected Topics in Applied Earth Observations and Remote Sensing, IEEE Journal of, 8(99), 1-11, doi: 10.1109/JSTARS.2015.2463768.

Inclusion of Solar Elevation Angle in Land Surface Albedo Parameterization Over Bare Soil Surface.

Science.gov (United States)

Zheng, Zhiyuan; Wei, Zhigang; Wen, Zhiping; Dong, Wenjie; Li, Zhenchao; Wen, Xiaohang; Zhu, Xian; Ji, Dong; Chen, Chen; Yan, Dongdong

2017-12-01

Land surface albedo is a significant parameter for maintaining a balance in surface energy. It is also an important parameter of bare soil surface albedo for developing land surface process models that accurately reflect diurnal variation characteristics and the mechanism behind the solar spectral radiation albedo on bare soil surfaces and for understanding the relationships between climate factors and spectral radiation albedo. Using a data set of field observations, we conducted experiments to analyze the variation characteristics of land surface solar spectral radiation and the corresponding albedo over a typical Gobi bare soil underlying surface and to investigate the relationships between the land surface solar spectral radiation albedo, solar elevation angle, and soil moisture. Based on both solar elevation angle and soil moisture measurements simultaneously, we propose a new two-factor parameterization scheme for spectral radiation albedo over bare soil underlying surfaces. The results of numerical simulation experiments show that the new parameterization scheme can more accurately depict the diurnal variation characteristics of bare soil surface albedo than the previous schemes. Solar elevation angle is one of the most important factors for parameterizing bare soil surface albedo and must be considered in the parameterization scheme, especially in arid and semiarid areas with low soil moisture content. This study reveals the characteristics and mechanism of the diurnal variation of bare soil surface solar spectral radiation albedo and is helpful in developing land surface process models, weather models, and climate models.

Iron oxide surfaces

Science.gov (United States)

Parkinson, Gareth S.

2016-03-01

The current status of knowledge regarding the surfaces of the iron oxides, magnetite (Fe3O4), maghemite (γ-Fe2O3), haematite (α-Fe2O3), and wüstite (Fe1-xO) is reviewed. The paper starts with a summary of applications where iron oxide surfaces play a major role, including corrosion, catalysis, spintronics, magnetic nanoparticles (MNPs), biomedicine, photoelectrochemical water splitting and groundwater remediation. The bulk structure and properties are then briefly presented; each compound is based on a close-packed anion lattice, with a different distribution and oxidation state of the Fe cations in interstitial sites. The bulk defect chemistry is dominated by cation vacancies and interstitials (not oxygen vacancies) and this provides the context to understand iron oxide surfaces, which represent the front line in reduction and oxidation processes. Fe diffuses in and out from the bulk in response to the O2 chemical potential, forming sometimes complex intermediate phases at the surface. For example, α-Fe2O3 adopts Fe3O4-like surfaces in reducing conditions, and Fe3O4 adopts Fe1-xO-like structures in further reducing conditions still. It is argued that known bulk defect structures are an excellent starting point in building models for iron oxide surfaces. The atomic-scale structure of the low-index surfaces of iron oxides is the major focus of this review. Fe3O4 is the most studied iron oxide in surface science, primarily because its stability range corresponds nicely to the ultra-high vacuum environment. It is also an electrical conductor, which makes it straightforward to study with the most commonly used surface science methods such as photoemission spectroscopies (XPS, UPS) and scanning tunneling microscopy (STM). The impact of the surfaces on the measurement of bulk properties such as magnetism, the Verwey transition and the (predicted) half-metallicity is discussed. The best understood iron oxide surface at present is probably Fe3O4(100); the structure is

Mostly surfaces

CERN Document Server

Schwartz, Richard Evan

2011-01-01

This book presents a number of topics related to surfaces, such as Euclidean, spherical and hyperbolic geometry, the fundamental group, universal covering surfaces, Riemannian manifolds, the Gauss-Bonnet Theorem, and the Riemann mapping theorem. The main idea is to get to some interesting mathematics without too much formality. The book also includes some material only tangentially related to surfaces, such as the Cauchy Rigidity Theorem, the Dehn Dissection Theorem, and the Banach-Tarski Theorem. The goal of the book is to present a tapestry of ideas from various areas of mathematics in a clear and rigorous yet informal and friendly way. Prerequisites include undergraduate courses in real analysis and in linear algebra, and some knowledge of complex analysis.

Surface mobilities on solid materials

International Nuclear Information System (INIS)

Binh, V.T.

1983-01-01

This book constitutes the proceedings of the NATO Advanced Study Institute on Surface Mobilities on Solid Materials held in France in 1981. The goal of the two-week meeting was to review up-to-date knowledge on surface diffusion, both theoretical and experimental, and to highlight those areas in which much more knowledge needs to be accumulated. Topics include theoretical aspects of surface diffusion (e.g., microscopic theories of D at zero coverage; statistical mechanical models and surface diffusion); surface diffusion at the atomic level (e.g., FIM studies of surface migration of single adatoms and diatomic clusters; field emission studies of surface diffusion of adsorbates); foreign adsorbate mass transport; self-diffusion mass transport (e.g., different driving forces for the matter transport along surfaces; measurements of the morphological evolution of tips); the role of surface diffusion in some fundamental and applied sciences (e.g. adatomadatom pair interactions and adlayer superstructure formation; surface mobility in chemical reactions and catalysis); and recent works on surface diffusion (e.g., preliminary results on surface self-diffusion measurements on nickel and chromium tips)

Effect of surface parameter of interband surface mode frequencies of finite diatomic chain

International Nuclear Information System (INIS)

Puszkarski, H.

1982-07-01

The surface modes of a finite diatomic chain of alternating atoms (M 1 not= M 2 ) are investigated. The surface force constants are assumed to differ from the bulk ones, with the resulting surface parameter a-tilde identical on both ends of the chain. Criteria, governing the existence of interband surface (IBS) modes with frequencies lying in the forbidden gap between acoustical and optical bulk bands for natural (a = 1) as well as non-natural (a not= 1) surface defect, are analysed by the difference equation method. It is found that the IBS modes localize, depending on the value of the surface parameter a, either at the surface of lighter atoms (if a-tilde is positive), or at that of heavier atoms (if a-tilde is negative). Two, one of no IBS modes are found to exist in the chain depending on the relation between the mass ratio and surface parameter - quantities on which the surface localization increment t-tilde depends. If two modes are present (one acoustical and the other optical), their frequencies are disposed symmetrically with respect to the middle of the forbidden gap, provided the surface defect is natural, or asymmetrically - if it is other than natural. If the localization of the IBS mode exceeds a well defined critical value tsub(c), the mode frequency becomes complex, indicating that the mode undergoes a damping. A comparison of the present results and those obtained by Wallis for the diatomic chain with natural surface defect is also given. (author)

Surface-stabilized gold nanocatalysts

Science.gov (United States)

Dai, Sheng [Knoxville, TN; Yan, Wenfu [Oak Ridge, TN

2009-12-08

A surface-stabilized gold nanocatalyst includes a solid support having stabilizing surfaces for supporting gold nanoparticles, and a plurality of gold nanoparticles having an average particle size of less than 8 nm disposed on the stabilizing surfaces. The surface-stabilized gold nanocatalyst provides enhanced stability, such as at high temperature under oxygen containing environments. In one embodiment, the solid support is a multi-layer support comprising at least a first layer having a second layer providing the stabilizing surfaces disposed thereon, the first and second layer being chemically distinct.

Nano- and Micro-Scale Oxidative Patterning of Titanium Implant Surfaces for Improved Surface Wettability.

Science.gov (United States)

Kim, In-hye; Son, Jun Sik; Choi, Seok Hwa; Kim, Kyo-han; Kwon, Tae-yub

2016-02-01

A simple and scalable surface modification treatment is demonstrated, in which nano- and microscale features are introduced into the surface of titanium (Ti) substrates by means of a novel and eco-friendly oxidative aqueous solution composed of hydrogen peroxide (H202) and sodium bicarbonate (NaHCO3). By immersing mirror-polished Ti discs in an aqueous mixture of 30 wt% H2O2/5 wt% NaHCO3 at 23 +/- 3 degrees C for 4 h, it was confirmed that this mixture is capable of generating microscale topographies on Ti surfaces. It also simultaneously formed nanochannels that were regularly arranged in a comb-like pattern on the Ti surface, thus forming a hierarchical surface structure. Further, these nano/micro-textured Ti surfaces showed great surface roughness and excellent wettability when compared with control Ti surfaces. This study demonstrates that a H2O2/NaHCO3 mixture can be effectively utilized to create reproducible nano/microscale topographies on Ti implant surfaces, thus providing an economical new oxidative solution that may be used effectively and safely as a Ti surface modification treatment.

Modification of Surface Energy via Direct Laser Ablative Surface Patterning

Science.gov (United States)

Wohl, Christopher J., Jr. (Inventor); Belcher, Marcus A. (Inventor); Connell, John W. (Inventor); Hopkins, John W. (Inventor)

2015-01-01

Surface energy of a substrate is changed without the need for any template, mask, or additional coating medium applied to the substrate. At least one beam of energy directly ablates a substrate surface to form a predefined topographical pattern at the surface. Each beam of energy has a width of approximately 25 micrometers and an energy of approximately 1-500 microJoules. Features in the topographical pattern have a width of approximately 1-500 micrometers and a height of approximately 1.4-100 micrometers.

Bio-Inspired Functional Surfaces Based on Laser-Induced Periodic Surface Structures.

Science.gov (United States)

Müller, Frank A; Kunz, Clemens; Gräf, Stephan

2016-06-15

Nature developed numerous solutions to solve various technical problems related to material surfaces by combining the physico-chemical properties of a material with periodically aligned micro/nanostructures in a sophisticated manner. The utilization of ultra-short pulsed lasers allows mimicking numerous of these features by generating laser-induced periodic surface structures (LIPSS). In this review paper, we describe the physical background of LIPSS generation as well as the physical principles of surface related phenomena like wettability, reflectivity, and friction. Then we introduce several biological examples including e.g., lotus leafs, springtails, dessert beetles, moth eyes, butterfly wings, weevils, sharks, pangolins, and snakes to illustrate how nature solves technical problems, and we give a comprehensive overview of recent achievements related to the utilization of LIPSS to generate superhydrophobic, anti-reflective, colored, and drag resistant surfaces. Finally, we conclude with some future developments and perspectives related to forthcoming applications of LIPSS-based surfaces.

Cryogenic Selective Surfaces

Data.gov (United States)