WorldWideScience

Sample records for surface mined include

  1. Applications of Geomatics in Surface Mining

    Science.gov (United States)

    Blachowski, Jan; Górniak-Zimroz, Justyna; Milczarek, Wojciech; Pactwa, Katarzyna

    2017-12-01

    In terms of method of extracting mineral from deposit, mining can be classified into: surface, underground, and borehole mining. Surface mining is a form of mining, in which the soil and the rock covering the mineral deposits are removed. Types of surface mining include mainly strip and open-cast methods, as well as quarrying. Tasks associated with surface mining of minerals include: resource estimation and deposit documentation, mine planning and deposit access, mine plant development, extraction of minerals from deposits, mineral and waste processing, reclamation and reclamation of former mining grounds. At each stage of mining, geodata describing changes occurring in space during the entire life cycle of surface mining project should be taken into consideration, i.e. collected, analysed, processed, examined, distributed. These data result from direct (e.g. geodetic) and indirect (i.e. remote or relative) measurements and observations including airborne and satellite methods, geotechnical, geological and hydrogeological data, and data from other types of sensors, e.g. located on mining equipment and infrastructure, mine plans and maps. Management of such vast sources and sets of geodata, as well as information resulting from processing, integrated analysis and examining such data can be facilitated with geomatic solutions. Geomatics is a discipline of gathering, processing, interpreting, storing and delivering spatially referenced information. Thus, geomatics integrates methods and technologies used for collecting, management, processing, visualizing and distributing spatial data. In other words, its meaning covers practically every method and tool from spatial data acquisition to distribution. In this work examples of application of geomatic solutions in surface mining on representative case studies in various stages of mine operation have been presented. These applications include: prospecting and documenting mineral deposits, assessment of land accessibility

  2. Surface Mines, Other - Longwall Mining Panels

    Data.gov (United States)

    NSGIC Education | GIS Inventory — Coal mining has occurred in Pennsylvania for over a century. A method of coal mining known as Longwall Mining has become more prevalent in recent decades. Longwall...

  3. Survey of nine surface mines in North America. [Nine different mines in USA and Canada

    Energy Technology Data Exchange (ETDEWEB)

    Hayes, L.G.; Brackett, R.D.; Floyd, F.D.

    1981-01-01

    This report presents the information gathered by three mining engineers in a 1980 survey of nine surface mines in the United States and Canada. The mines visited included seven coal mines, one copper mine, and one tar sands mine selected as representative of present state of the art in open pit, strip, and terrace pit mining. The purpose of the survey was to investigate mining methods, equipment requirements, operating costs, reclamation procedures and costs, and other aspects of current surface mining practices in order to acquire basic data for a study comparing conventional and terrace pit mining methods, particularly in deeper overburdens. The survey was conducted as part of a project under DOE Contract No. DE-AC01-79ET10023 titled The Development of Optimal Terrace Pit Coal Mining Systems.

  4. Can We Include The Third Dimension During Image Mining?

    Indian Academy of Sciences (India)

    Table of contents. Can We Include The Third Dimension During Image Mining? Retrieve An Image · Content-Based Retrieval · Problem Statement · Slide 5 · CBIR Methodology · Slide 7 · Illustration : Logo Search · Illustration: Arbitrary Query · Limitations · Illustration: Change in View · Slide 12 · Illustration: Depth Variation.

  5. 12th International Symposium Continuous Surface Mining

    CERN Document Server

    2015-01-01

    This edited volume contains research results presented at the 12th International Symposium Continuous Surface Mining, ISCSM Aachen 2014. The target audience primarily comprises researchers in the lignite mining industry and practitioners in this field but the book may also be beneficial for graduate students.

  6. 30 CFR 780.27 - Reclamation plan: Surface mining near underground mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Reclamation plan: Surface mining near underground mining. 780.27 Section 780.27 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL...

  7. Surface mining and land reclamation in Germany

    Energy Technology Data Exchange (ETDEWEB)

    Nephew, E.A.

    1972-05-01

    Mining and land restoration methods as well as planning and regulatory procedures employed in West Germany to ameliorate environmental impacts from large-scale surface mining are described. The Rhineland coalfield in North Rhine Westphalia contains some 55 billion tons of brown-coal (or lignite), making the region one of Europe's most important energy centers. The lignite is extracted from huge, open-pit mines, resulting in large areas of disturbed land. The German reclamation approach is characterized by planning and carrying out the mining process as one continuum from early planning to final restoration of land and its succeeding use. Since the coalfield is located in a populated region with settlements dating back to Roman times, whole villages lying in the path of the mining operations sometimes have to be evacuated and relocated. Even before mining begins, detailed concepts must be worked out for the new landscape which will follow: the topography, the water drainage system, lakes and forests, and the intended land-use pattern are designed and specified in advance. Early, detailed planning makes it possible to coordinate mining and concurrent land reclamation activities. The comprehensive approach permits treating the overall problem as a whole rather than dealing with its separate aspects on a piecemeal basis.

  8. Range of drainage effect of surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Sozanski, J.

    1978-03-01

    This paper discusses methods of calculating the range of effects of water drainage from surface coal mines and other surface mines. It is suggested that methods based on test pumping (water drainage) are time consuming, and the results can be distorted by atmospheric factors such as rain fall or dry period. So-called empirical formulae produce results which are often incorrect. The size of a cone shaped depression calculated on the basis of empirical formulae can be ten times smaller than the size of the real depression. It is suggested that using a formula based on the Dupuit formula is superior to other methods of depression calculation. According to the derived formulae the radius of the depresion cone is a function of parameters of the water bearing horizons, size of surface mine working and of water depression. The proposed formula also takes into account the influence of atmospheric factors (water influx caused by precipitation, etc.). (1 ref.) (In Polish)

  9. Carbon Sequestration on Surface Mine Lands

    Energy Technology Data Exchange (ETDEWEB)

    Donald Graves; Christopher Barton; Richard Sweigard; Richard Warner; Carmen Agouridis

    2006-03-31

    Since the implementation of the federal Surface Mining Control and Reclamation Act of 1977 (SMCRA) in May of 1978, many opportunities have been lost for the reforestation of surface mines in the eastern United States. Research has shown that excessive compaction of spoil material in the backfilling and grading process is the biggest impediment to the establishment of productive forests as a post-mining land use (Ashby, 1998, Burger et al., 1994, Graves et al., 2000). Stability of mine sites was a prominent concern among regulators and mine operators in the years immediately following the implementation of SMCRA. These concerns resulted in the highly compacted, flatly graded, and consequently unproductive spoils of the early post-SMCRA era. However, there is nothing in the regulations that requires mine sites to be overly compacted as long as stability is achieved. It has been cultural barriers and not regulatory barriers that have contributed to the failure of reforestation efforts under the federal law over the past 27 years. Efforts to change the perception that the federal law and regulations impede effective reforestation techniques and interfere with bond release must be implemented. Demonstration of techniques that lead to the successful reforestation of surface mines is one such method that can be used to change perceptions and protect the forest ecosystems that were indigenous to these areas prior to mining. The University of Kentucky initiated a large-scale reforestation effort to address regulatory and cultural impediments to forest reclamation in 2003. During the three years of this project 383,000 trees were planted on over 556 acres in different physiographic areas of Kentucky (Table 1, Figure 1). Species used for the project were similar to those that existed on the sites before mining was initiated (Table 2). A monitoring program was undertaken to evaluate growth and survival of the planted species as a function of spoil characteristics and

  10. Overcoming soil compaction in surface mine reclamation

    International Nuclear Information System (INIS)

    Sweigard, R.J.

    1991-01-01

    Rubber-tyred soil reconstruction equipment causes compaction of soil and means surface mine operators cannot satisfy crop yield standards defined by the Surface Mining Control and Reclamation Act. Soil compaction can be overcome by either modifying the reconstruction process or alleviating the problem, for example by deep tillage, once it occurs. The Dept. of Mining Engineering at the Institute of Mining and Minerals Research is conducting a laboratory investigation into a method of injecting low density porous organic material into a bin containing soil at the same time as the soil is ripped. This should prevent voids collapsing when subjected to forces from farm equipment and natural sources. Soil analyses are performed before and after the injection. Ripping and injection with ground pecan shells had a residual effect on nuclear bulk density compared to the initially compacted case and also showed an improvement in hydraulic conductivity. Work is in progress on modifying the system to handle other injection material and should lead on to field tests on a prototype involving both soil analysis and crop yield determination. 1 fig

  11. Hearing-impairment among workers in a surface gold mining ...

    African Journals Online (AJOL)

    A study to determine the impact of hazardous noise on workers was conducted in a surface gold mining company in Ghana. The procedure adopted included noise survey, case history, otoscopy and conventional pure-tone audiometry. Five main areas were surveyed for hazardous noise namely, Pit, Processing, Ana ...

  12. Surface mine impoundments as wildlife and fish habitat

    Science.gov (United States)

    Mark A. Rumble

    1989-01-01

    Unreclaimed surface mine impoundments provide poor fish and wildlife habitat. Recommendations given here for reclaiming "prelaw" impoundments and creating new impoundments could provide valuable fish and wildlife habitat if incorporated into existing laws and mine plans.

  13. 30 CFR 912.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 912.764 Section 912.764 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE IDAHO § 912.764 Process for designating areas unsuitable for surface coal mining... coal mining and reclamation operations. ...

  14. Underground coal mine subsidence impacts on surface water

    International Nuclear Information System (INIS)

    Stump, D.E. Jr.

    1992-01-01

    This paper reports that subsidence from underground coal mining alters surface water discharge and availability. The magnitude and areal extent of these impacts are dependent on many factors, including the amount of subsidence, topography, geology, climate, surface water - ground water interactions, and fractures in the overburden. There alterations may have positive and/or negative impacts. One of the most significant surface water impacts occurred in July 1957 near West Pittston, Pennsylvania. Subsidence in the Knox Mine under the Coxton Yards of the Lehigh Valley Railroad allowed part of the discharge in the Susquehanna River to flow into the mine and create a crater 200 feet in diameter and 300 feet deep. Fourteen railroad gondola cars fell into the hole which was eventually filled with rock, sand, and gravel. Other surface water impacts from subsidence may include the loss of water to the ground water system, the gaining of water from the ground water system, the creation of flooded subsidence troughs, the increasing of impoundment storage capacity, the relocation of water sources (springs), and the alteration of surface drainage patterns

  15. Surface movement above an underground coal longwall mine after closure

    Science.gov (United States)

    Vervoort, André

    2016-09-01

    The surface movement in an area of about 22 km2 above the underground coal mine of Houthalen was analyzed based on Interferometry with Synthetic Aperture Radar (InSAR) measurements. After its closure in 1992, a residual subsidence was observed over a period of several years, followed by an uplift of the surface above and around the past longwall panels, whereby the rate of movement was, in absolute terms, of the same order for the two types of movements. The processes behind these movements are different. The process of subsidence is caused by the caving of the roof above the mined-out area and is mainly a mechanical stress-deformation process, including time-dependent aspects. However, the process of uplift is most probably caused by the swelling of the clay minerals in the argillaceous rocks in the coal strata after the flooding of the underground workings. Hence, the areas in which there is the greatest risk of damage to the surface infrastructure are not the same for the hazards linked to subsidence and uplift. For example, the zone in which the maximum uplift occurs clearly is at a different location from that of the zone with the maximum residual subsidence. There is no clear sign that the amount of mining underneath affects the residual subsidence, and there is no indication that the process of uplift is linked directly to the mining characteristics. It is more likely that uplift as the result of flooding is initiated at, or close to, the vertical shafts.

  16. Impact of surface coal mining on soil hydraulic properties

    Science.gov (United States)

    X. Liu; J. Q. Wu; P. W. Conrad; S. Dun; C. S. Todd; R. L. McNearny; William Elliot; H. Rhee; P. Clark

    2016-01-01

    Soil erosion is strongly related to soil hydraulic properties. Understanding how surface coal mining affects these properties is therefore important in developing effective management practices to control erosion during reclamation. To determine the impact of mining activities on soil hydraulic properties, soils from undisturbed areas, areas of roughly graded mine...

  17. Possibilities of surface waters monitoring at mining areas using UAV

    Science.gov (United States)

    Lisiecka, Ewa; Motyka, Barbara; Motyka, Zbigniew; Pierzchała, Łukasz; Szade, Adam

    2018-04-01

    The selected, remote measurement methods are discussed, useful for determining surface water properties using mobile unmanned aerial platforms (UAV). The possibilities of using this type of solutions in the scope of measuring spatial, physicochemical and biological parameters of both natural and anthropogenic water reservoirs, including flood polders, water-filled pits, settling tanks and mining sinks were analyzed. Methods of remote identification of the process of overgrowing this type of ecosystems with water and coastal plant formations have also been proposed.

  18. Achieving revegetation standards on surface mined lands. [Montana

    Energy Technology Data Exchange (ETDEWEB)

    Sindelar, B. W.

    1980-01-01

    Standards for revegetation success on surface mined lands have been developed by federal and state regulatory authorities. Because reclamation science is young, its potential for meeting revegetation standards is untested. This paper reviews the Montana revegetation standards which require establishment of a diverse, effective, and permanent vegetational cover. In addition, productivity, cover, and diversity must be comparable to that of reference areas. Fifty-one percent of the cover must be of native species. A plant succession study at Colstrip, MT, has been directed toward documenting establishment, succession, and stability of vegetation on surface mined land. Data from the study were used to discuss success of reclamation seedings since 1969. Major problem areas identified include achieving: comparable life form composition, cover of perennial vegetation, species diversity, and seasonality of forage and browse. Achieving erosion control, comparable production, and native species dominance did not appear to be major problems. Achieving revegetation standards on mined lands in the future will require very specialized reclamation procedures and continued research. Naturally revegetated mined lands at Colstrip indicate good potential for reclamation success.

  19. Quartz exposure levels in the underground and surface coal mining industry

    Energy Technology Data Exchange (ETDEWEB)

    Ainsworth, S.M.; Gero, A.J.; Parobeck, P.S; Tomb, T.F. [US Mine Safety and Health Administration, Pittsburgh, PA (United States)

    1995-10-01

    Occupational quartz exposure data gathered from the Mine Safety and Health Adminsitration`s respirable dust enforcement program and a program to monitor quartz exposure in several mining occupations were compiled and analyzed to assess the status of quartz exposures in the coal mining industry. The analysis showed that, in underground mines, a substantial number of samples contained greater than 5% quartz. Occupations that showed a high frequency of excessive quartz exposure included the roof bolter, continuous miner operator, and continuous miner operator helper. In surface coal mines the highwall drill operator and helper, bulldozer operator, scraper operator, and truck driver were frequently exposed to high quartz concentrations.

  20. NOVEL EXCAVATION TECHNOLOGIES FOR EFFICIENT AND ECONOMIC SURFACE MINING

    Energy Technology Data Exchange (ETDEWEB)

    Vladislav Kecojevic; Samuel Frimpong

    2005-05-01

    Ground excavation constitutes a significant component of production costs in any surface mining operation. The excavation process entails material digging and removal in which the equipment motion is constrained by the workspace geometry. A major excavation problem is the variability of material properties, resulting in varying mechanical energy input and stress loading of shovel dipper-and-tooth assembly across the working bench. This variability has a huge impact on the shovel dipper and tooth assembly in hard formations. With this in mind, the primary objectives of the project were to (i) provide the theoretical basis to develop the Intelligent Shovel Excavation (ISE) technology to solve the problems associated with excavation in material formations; (ii) advance knowledge and frontiers in shovel excavation through intelligent navigation; and (iii) submit proposal for the design, development and implementation of the ISE technology for shovel excavation at experimental surface mining sites. The mathematical methods were used to (i) develop shovel's kinematics and dynamics, and (ii) establish the relationship between shovel parameters and the resistive forces from the material formation during excavation process. The ADAMS simulation environment was used to develop the hydraulic and cable shovel virtual prototypes. Two numerical examples are included to test the theoretical hypotheses and the obtained results are discussed. The area of sensor technology was studied. Application of specific wrist-mounted sensors to characterize the material, bucket and frame assembly was determined. Data acquisition, display and control system for shovel loading technology was adopted. The concept of data acquisition and control system was designed and a shovel boom stresses were simulated. A multi-partner collaboration between research organizations, shovel manufacturer, hardware and sensor technology companies, and surface mining companies is proposed to test design

  1. Mining-induced surface damage and the study of countermeasures

    International Nuclear Information System (INIS)

    Cui Jixian

    1994-01-01

    Coal constitutes China's major energy resource. The majority of the coal is produced from underground mining operations. Surface subsidence may amount to 80% of the thickness of the seam mined, while the subsided volume is around 60% of the mined volume underground. An area of 20 hectares of land will be affected with each 1 million tons of coal mined, thereby causing severe surface damage. Following a description of the characteristics of surface damages due to underground mining disturbance, this paper elaborates on the damage prediction method, standards applied for evaluating the damages experienced by surface buildings, land reclamation methods in subsided area, measures for reinforcing and protecting buildings in mining-affected areas, and performance of antideformation buildings

  2. Surface deformation of the secondary former mining areas

    Directory of Open Access Journals (Sweden)

    Tadeusz Głowacki

    2013-09-01

    Full Text Available The paper discuss the problem of secondary deformation observed on the surface of the land in the area of the old, non-existent copper and coal mines. The authors discuss the formation of the deformation in the final period of the mine, and after his arrest, after the close of any work of protecting the surface area of influence of mining activities. Discusses the reduction of the surface of the example of two disused mines: mining copper “Konrad” in Iwiny and “Thorez” in Walbrzych, an old coal mine. In the first part of the paper discusses a brief history of the creation of old copper basin and the Lower Silesian coal basin. It then discusses the formation of deformation processes in mining areas. Conducting continuous surveying allows you to monitor changes in the formation of land, in the paper indicate the source of the vertical displacements after ending of operation, the closure of the mine and stopped all work safety. In the area of Lower Silesia there are many remnants of disused mines, surface geodetic measurements show a constant activity in post-mining areas and the need to control the formation of the surface.

  3. Surface Mining: Soil, Coal, and Society

    Science.gov (United States)

    Singer, S. Fred

    Soil is a resource that is for all practical purposes nonrenewable. Natural soils have been formed over periods of thousands of years, although with intensive management and with inputs of nutrients and conditioners this time could be reduced.Coal is another precious resource, of critical importance as an interim fuel for perhaps the next hundred years or so, until renewable energy resources based on nuclear fusion or solar energy can become economic and widespread. Surface mining is the most efficient method for obtaining coal at lowest cost. But it disturbs the soil and takes it out of agricultural production for many years or decades, and sometimes forever, unless the land is properly restored at considerable cost.

  4. Reforesting unused surface mined lands by replanting with native trees

    Science.gov (United States)

    Patrick N. Angel; James A. Burger; Carl E. Zipper; Scott Eggerud

    2012-01-01

    More than 600,000 ha (1.5 million ac) of mostly forested land in the Appalachian region were surface mined for coal under the Surface Mining Control and Reclamation Act. Today, these lands are largely unmanaged and covered with persistent herbaceous species, such as fescue (Festuca spp.) and sericea lespedeza (Lespedeza cuneata [Dum. Cours.] G. Don,) and a mix of...

  5. Vibration of Piezoelectric Nanowires Including Surface Effects

    Directory of Open Access Journals (Sweden)

    R. Ansari

    2014-04-01

    Full Text Available In this paper, surface and piezoelectric effects on the vibration behavior of nanowires (NWs are investigated by using a Timoshenko beam model. The electric field equations and the governing equations of motion for the piezoelectric NWs are derived with the consideration of surface effects. By the exact solution of the governing equations, an expression for the natural frequencies of NWs with simply-supported boundary conditions is obtained. The effects of piezoelectricity and surface effects on the vibrational behavior of Timoshenko NWs are graphically illustrated. A comparison is also made between the predictions of Timoshenko beam model and those of its Euler-Bernoulli counterpart. Additionally, the present results are validated through comparison with the available data in the literature.

  6. 30 CFR 947.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 947.762 Section 947.762 Mineral Resources OFFICE OF SURFACE MINING... mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining Operations, shall apply to surface coal mining and reclamation operations. ...

  7. 30 CFR 921.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 921.762 Section 921.762 Mineral Resources OFFICE OF SURFACE MINING... mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining Operations, shall apply to surface coal mine operations. ...

  8. 30 CFR 942.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 942.764 Section 942.764 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE TENNESSEE § 942.764 Process for designating areas unsuitable for surface coal mining... Mining Operations, shall apply to surface coal mining and reclamation operations. (b) The Secretary shall...

  9. 30 CFR 941.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 941.762 Section 941.762 Mineral Resources OFFICE OF SURFACE MINING... mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining Operations, shall apply to surface coal mine operations. ...

  10. 30 CFR 933.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 933.762 Section 933.762 Mineral Resources OFFICE OF SURFACE MINING... mining operations. Part 762 of this chapter, Criteria for Designation Areas Unsuitable for Surface Coal Mining Operations, shall apply to surface coal mining and reclamation operations. ...

  11. 30 CFR 939.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 939.762 Section 939.762 Mineral Resources OFFICE OF SURFACE MINING... mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining Operations, shall apply to surface coal mining and reclamation operations. ...

  12. 30 CFR 905.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 905.762 Section 905.762 Mineral Resources OFFICE OF SURFACE MINING... mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining Operations, shall apply to surface coal mining operations. ...

  13. Carbon Sequestration on Surface Mine Lands

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Bon Jun Koo; Richard Sweigard; Richard Warner

    2004-11-30

    extracted from the study area to evaluate carbon accumulation as a function of time on the mine sites. These trees were extracted and separated into the following components: foliage, stems, branches, and roots. Each component was evaluated to determine the contribution of each to the total sequestration value. The fourth quarter of the year was devoted to analyzing the first two years tree planting activities and the evaluation of the results. These analyses included the species success at each of the sites and quantifying the data for future year determination of research levels. Additional detailed studies have been planned to further quantify total carbon storage accumulation on the study areas. At least 124 acres of new plantings will be established in 2005 to bring the total to 500 acres or more in the study area across the state of Kentucky.

  14. An intelligent hybrid system for surface coal mine safety analysis

    Energy Technology Data Exchange (ETDEWEB)

    Lilic, N.; Obradovic, I.; Cvjetic, A. [University of Belgrade, Belgrade (Serbia)

    2010-06-15

    Analysis of safety in surface coal mines represents a very complex process. Published studies on mine safety analysis are usually based on research related to accidents statistics and hazard identification with risk assessment within the mining industry. Discussion in this paper is focused on the application of AI methods in the analysis of safety in mining environment. Complexity of the subject matter requires a high level of expert knowledge and great experience. The solution was found in the creation of a hybrid system PROTECTOR, whose knowledge base represents a formalization of the expert knowledge in the mine safety field. The main goal of the system is the estimation of mining environment as one of the significant components of general safety state in a mine. This global goal is subdivided into a hierarchical structure of subgoals where each subgoal can be viewed as the estimation of a set of parameters (gas, dust, climate, noise, vibration, illumination, geotechnical hazard) which determine the general mine safety state and category of hazard in mining environment. Both the hybrid nature of the system and the possibilities it offers are illustrated through a case study using field data related to an existing Serbian surface coal mine.

  15. Hydrochemical characteristics of mine waters from abandoned mining sites in Serbia and their impact on surface water quality.

    Science.gov (United States)

    Atanacković, Nebojša; Dragišić, Veselin; Stojković, Jana; Papić, Petar; Zivanović, Vladimir

    2013-11-01

    Upon completion of exploration and extraction of mineral resources, many mining sites have been abandoned without previously putting environmental protection measures in place. As a consequence, mine waters originating from such sites are discharged freely into surface water. Regional scale analyses were conducted to determine the hydrochemical characteristics of mine waters from abandoned sites featuring metal (Cu, Pb-Zn, Au, Fe, Sb, Mo, Bi, Hg) deposits, non-metallic minerals (coal, Mg, F, B) and uranium. The study included 80 mine water samples from 59 abandoned mining sites. Their cation composition was dominated by Ca2+, while the most common anions were found to be SO4(2-) and HCO3-. Strong correlations were established between the pH level and metal (Fe, Mn, Zn, Cu) concentrations in the mine waters. Hierarchical cluster analysis was applied to parameters generally indicative of pollution, such as pH, TDS, SO4(2-), Fe total, and As total. Following this approach, mine water samples were grouped into three main clusters and six subclusters, depending on their potential environmental impact. Principal component analysis was used to group together variables that share the same variance. The extracted principal components indicated that sulfide oxidation and weathering of silicate and carbonate rocks were the primary processes, while pH buffering, adsorption and ion exchange were secondary drivers of the chemical composition of the analyzed mine waters. Surface waters, which received the mine waters, were examined. Analysis showed increases of sulfate and metal concentrations and general degradation of surface water quality.

  16. Woody vegetation and succession on the Fonde surface mine demonstration area, Bell County, Kentucky

    International Nuclear Information System (INIS)

    Wade, G.L.; Thompson, R.L.

    1999-01-01

    The long term impact of surface mining on vegetation and plant succession has always been of concern to environmentalists and residents of Appalachia. The Fonde Surface Mine Demonstration Area is a 7.3-ha, NE-NW-aspect contour coal mine at an elevation of 562 m. It was reclaimed in 1965 to show state-of-the-art surface mine reclamation techniques consistent with then-current law and regulations after coal mining in 1959 and 1963. The mine spoils were lightly graded to control erosion and crates a bench with water control and two sediment ponds. Soil pH ranged from 2.8 to 5.9. About 80 percent of the mine was planted with 18 tree and shrub species including plantations of mixed pine, mixed hardwoods, black locust, and shrubs for wildlife. In a complete floristic inventory conducted 25 years later, the authors found the woody flora consisted of 34 families, 53 genera, and 70 species including 7 exotics. This inventory of the Fonde mine shows that a diverse forest vegetation can be reestablished after extreme disturbances in Appalachia. Black locust, yellow poplar, and Virginia pine reproduction varied significantly among plantation types. Canopy tree species significantly affected ground layer cover, total species richness, number of tree seedling species, and total number of tree seedlings present. Mine soil type affected ground layer percent cover and total species richness. Pre-SMCRA (Surface Mining Control and Reclamation Act of 1977) reclaimed and inventoried mines can be used to evaluate biodiversity on post-SMCRA mines

  17. Environmental impact assessment for surface coal mine - a case study

    International Nuclear Information System (INIS)

    Sen, P.; Chakraborty, K.

    1994-01-01

    Surface coal mines being the largest contributor to the national coal production, the study of environmental impacts due to this becomes mandatory as it will help in proper planning and safe operations of the mine in an environmentally compatible manner. Within the scope of this paper, a model for preparation of comprehensive environmental impact assessment (EIA) by utilising a new evaluation methodology leading to determination of Environmental Quality Designation an index has been developed and this model has been validated by using data from a running surface coal mine in Wardha Valley Coalfield. Based on this exercise, the overall impact of the surface coal mine under consideration on environment indicates a medium level and accordingly the control measures have to be planned. Thus repair to the environment has to be made a concurrent activity with mining i.e. to say we have to design with nature not against it

  18. Potential utility of the thematic mapper for surface mine monitoring

    International Nuclear Information System (INIS)

    Irons, J.R.; Lachowski, H.M.

    1981-01-01

    One of many potential applications of the thematic mapper (TM) is surface mine monitoring. To assess this potential, data acquired by an aircraft multispectral scanner over Pennsylvania surface mines were preprocessed to simulate the anticipated spectral, spatial, and radiometric characteristics of TM data. False color imagery and thematic maps were derived from the simulated data and compared to imagery and maps derived from LANDSAT multispectral scanner subsystems data. On the basis of this comparison, TM data should definitely increase the detail and accuracy of remotely acquired surface mine information and may enable the remote determination of compliance with reclamation regulations

  19. Applying WEPP technologies to western alkaline surface coal mines

    Science.gov (United States)

    J. Q. Wu; S. Dun; H. Rhee; X. Liu; W. J. Elliot; T. Golnar; J. R. Frankenberger; D. C. Flanagan; P. W. Conrad; R. L. McNearny

    2011-01-01

    One aspect of planning surface mining operations, regulated by the National Pollutant Discharge Elimination System (NPDES), is estimating potential environmental impacts during mining operations and the reclamation period that follows. Practical computer simulation tools are effective for evaluating site-specific sediment control and reclamation plans for the NPDES....

  20. Loosewall stability in United Kingdom surface coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Stead, D.; Singh, R. (University of Saskatchewan, Saskatoon (Canada). Department of Geological Sciences)

    1989-05-01

    In order to successfully exploit surface coal mine reserves, a database was compiled over the last 10 years containing information on loosewall slope failures such as mine locality information, failure date, failure height, failure slope angle, failure depth, failure length, failure volume, assumed failure mechanism, pavement dip, failure surface type, water data, curvature of slope in plan and section, and mining method. Both the Bishop's simplified and the biplanar wedge methods were used to conduct a detailed two-dimensional limit equilibrium back. 11 figs., 31 refs.,

  1. The Effect of Mining Activity on the Surface in the Safety Shaft Pillar Area of Mayrau Mine

    Czech Academy of Sciences Publication Activity Database

    Živor, Roman; Klos, Pavel; Pechoč, Jiří; Brož, Milan

    M-24(340) (2002), s. 227-235 ISSN 0138-015X. [Polish-Czech-Slovakian Symposium on Mining Geophysics /28./. Niedzica, 11.06.2001-13.06.2001] R&D Projects: GA AV ČR IBS3086005 Institutional research plan: CEZ:AV0Z3046908 Keywords : shaft pillar * mining * surface subsidence Subject RIV: DH - Mining, incl. Coal Mining

  2. 30 CFR 910.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 910.764 Section 910.764 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE GEORGIA § 910.764 Process for designating areas unsuitable for surface coal mining...

  3. 30 CFR 903.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 903.762 Section 903.762 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE ARIZONA § 903.762 Criteria for designating areas as unsuitable for surface coal mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining...

  4. 30 CFR 922.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 922.762 Section 922.762 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE MICHIGAN § 922.762 Criteria for designating areas as unsuitable for surface coal mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining...

  5. 30 CFR 937.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 937.764 Section 937.764 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE OREGON § 937.764 Process for designating areas unsuitable for surface coal mining...

  6. 30 CFR 762.13 - Land exempt from designation as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 762.13 Section 762.13 Mineral Resources OFFICE OF SURFACE MINING... AREAS AS UNSUITABLE FOR SURFACE COAL MINING OPERATIONS § 762.13 Land exempt from designation as unsuitable for surface coal mining operations. The requirements of this part do not apply to— (a) Lands on...

  7. 30 CFR 762.15 - Exploration on land designated as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 762.15 Section 762.15 Mineral Resources OFFICE OF SURFACE MINING... AREAS AS UNSUITABLE FOR SURFACE COAL MINING OPERATIONS § 762.15 Exploration on land designated as unsuitable for surface coal mining operations. Designation of any area as unsuitable for all or certain types...

  8. 30 CFR 937.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 937.762 Section 937.762 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE OREGON § 937.762 Criteria for designating areas as unsuitable for surface coal mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining...

  9. 30 CFR 922.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 922.764 Section 922.764 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE MICHIGAN § 922.764 Process for designating areas unsuitable for surface coal mining...

  10. 30 CFR 912.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 912.762 Section 912.762 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE IDAHO § 912.762 Criteria for designating areas as unsuitable for surface coal mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining...

  11. 30 CFR 910.762 - Criteria for designating areas as unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... for surface coal mining operations. 910.762 Section 910.762 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE GEORGIA § 910.762 Criteria for designating areas as unsuitable for surface coal mining operations. Part 762 of this chapter, Criteria for Designating Areas Unsuitable for Surface Coal Mining...

  12. 30 CFR 941.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 941.764 Section 941.764 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE SOUTH DAKOTA § 941.764 Process for designating areas unsuitable for surface coal mining...

  13. 30 CFR 939.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 939.764 Section 939.764 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE RHODE ISLAND § 939.764 Process for designating areas unsuitable for surface coal mining...

  14. Wide Strip Backfill Mining for Surface Subsidence Control and Its Application in Critical Mining Conditions of a Coal Mine

    Directory of Open Access Journals (Sweden)

    Wenhao Cao

    2018-03-01

    Full Text Available Critical mining under buildings, railways, and water bodies (BRW brings the contradiction between high recovery rate and minor environmental hazards. To lessen this contradiction, an innovative mining method referred to as “wide strip backfill mining” (WSBM was proposed in this study. A Winkler beam model is applied to the primary key strata (PKS, and the study revealed a surface subsidence control mechanism and designed the technical parameters of the method. The respective numerical simulations suggested the feasibility of the proposed method and the main influencing factors on surface subsidence can be ranked in descending order as wide filling strip width (WFSW, filling ratio, and pillar width. Meanwhile, a drop in the WFSW from 96 m to 72 m brought out the surface subsidence reduction by 44.5%. By using the super-high water content filling material, the proposed method was applied in the Taoyi coal mine under critical mining conditions. The resulting surface subsidence and deformations met the safety requirements for building protection level 1, and the recovery rate reached 75.9%. Moreover, the application of the method achieved significant technical and economic benefits. The research can provide a theoretical and experimental substantiation for critical mining under BRW.

  15. Economic Impacts of Surface Mining on Household Drinking Water Supplies

    Science.gov (United States)

    This report provides information on the economic and social impacts of contaminated surface and ground water supplies on residents and households near surface mining operations. The focus is on coal slurry contamination of water supplies in Mingo County, West Virginia, and descr...

  16. 30 CFR 905.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 905.764 Section 905.764 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE CALIFORNIA § 905.764 Process for designating areas unsuitable for surface coal mining... coal mining operations beginning one year after the effective date of this program. ...

  17. 30 CFR 921.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 921.764 Section 921.764 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS... Coal Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions...

  18. 30 CFR 947.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 947.764 Section 947.764 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE WASHINGTON § 947.764 Process for designating areas unsuitable for surface coal mining... coal mining and reclamation operations. (b) The Secretary shall notify the Washington Department of...

  19. 30 CFR 933.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 933.764 Section 933.764 Mineral Resources OFFICE OF SURFACE MINING... Coal Mining Operations, pertaining to petitioning, initial processing, hearing requirements, decisions... surface coal mining and reclamation operations beginning one year after the effective date of this program. ...

  20. 30 CFR 903.764 - Process for designating areas unsuitable for surface coal mining operations.

    Science.gov (United States)

    2010-07-01

    ... surface coal mining operations. 903.764 Section 903.764 Mineral Resources OFFICE OF SURFACE MINING... WITHIN EACH STATE ARIZONA § 903.764 Process for designating areas unsuitable for surface coal mining... coal mining operations beginning June 24, 1996, one year after the effective date of this program. ...

  1. Effect of traditional gold mining to surface water quality in Murung Raya District, Central Kalimantan Province

    Directory of Open Access Journals (Sweden)

    W.Wilopo

    2013-10-01

    Full Text Available There are many locations for traditional gold mining in Indonesia. One of these is in Murung Raya District, Central Kalimantan Province. Mining activities involving the application of traditional gold processing technology have a high potential to pollute the environment, especially surface water. Therefore, this study aims to determine the impact of gold mining and processing on surface water quality around the mine site. Based on the results of field surveys and laboratory analysis, our data shows that the concentration of mercury (Hg and Cyanide (CN has reached 0.3 mg/L and 1.9 mg/L, respectively, in surface water. These values exceed the drinking water quality standards of Indonesia and WHO. Many people who live in the mining area use surface water for daily purposes including drinking, cooking, bathing and washing. This scenario is very dangerous because the effect of surface water contamination on human health cannot be immediately recognized or diagnosed. In our opinion the dissemination of knowledge regarding the treatment of gold mining wastewater is urgently required so that the quality of wastewater can be improved before it is discharged into the environment

  2. Project proposal for surface-mined land enhancement (SMILE)

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, A.M.

    1975-01-29

    Reclaiming strip-mined land is a program ideally suited to meet the requirements of the Job Opportunities Program. It will provide healthy and vigorous outdoor activity involving surveying, earth-moving, revegetation, tree planting, construction of roads, paths, lakes, and park facilities. It is work which states and communities are anxious to have started. It can be done with relatively small capital expenditure. Technical expertise is available in the various states concerned. FEA is the ideal agency to initiate such a project. It has regional offices throughout the country with close contacts with states and local communities. It is a temporary emergency agency with considerable experience in initiating and carrying out crash programs. It is not tied down to the procedures and bureaucratic problems which burden an old-line agency attempting to take on new work. Finally, FEA has a vital interest in energy and surface mining in particular. It played a major role in drafting the new legislation. The initial program development is described, including the technical aspects, economic aspects and administration, cost, budget, cooperation with state agencies, etc.

  3. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2004-11-30

    A monitoring program to measure treatment effects on above ground, and below ground carbon and nitrogen pools for the planting areas is being conducted. The collection of soil and tissue samples from both the 2003 and 2004 plantings is complete and are currently being processed in the laboratory. Detailed studies have been initiated to address specific questions pertaining to carbon cycling. Examinations of decomposition and heterotropic respiration on carbon cycling in the reforestation plots were continued during this reporting period. A whole-tree harvesting method was employed to evaluate carbon accumulation as a function of time on the mined site. The trees were extracted from the sites and separated into the following components: foliage, stems, branches, and roots.

  4. Analysis of Occupational Accidents in Underground and Surface Mining in Spain Using Data-Mining Techniques.

    Science.gov (United States)

    Sanmiquel, Lluís; Bascompta, Marc; Rossell, Josep M; Anticoi, Hernán Francisco; Guash, Eduard

    2018-03-07

    An analysis of occupational accidents in the mining sector was conducted using the data from the Spanish Ministry of Employment and Social Safety between 2005 and 2015, and data-mining techniques were applied. Data was processed with the software Weka. Two scenarios were chosen from the accidents database: surface and underground mining. The most important variables involved in occupational accidents and their association rules were determined. These rules are composed of several predictor variables that cause accidents, defining its characteristics and context. This study exposes the 20 most important association rules in the sector-either surface or underground mining-based on the statistical confidence levels of each rule as obtained by Weka. The outcomes display the most typical immediate causes, along with the percentage of accidents with a basis in each association rule. The most important immediate cause is body movement with physical effort or overexertion, and the type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident are different between the two scenarios. Data-mining techniques were chosen as a useful tool to find out the root cause of the accidents.

  5. Infiltration of surface mined land reclaimed by deep tillage treatments

    International Nuclear Information System (INIS)

    Chong, S.K.; Cowsert, P.

    1994-01-01

    Surface mining of coal leads to the drastic disturbance of soils. Compaction of replaced subsoil and topsoil resulting from hauling, grading, and leveling procedures produces a poor rooting medium for crop growth. Soil compaction results in high bulk density, low macroporosity, poor water infiltration capacity, and reduced elongation of plant roots. In the United States, Public Law 95-87 mandates that the rooting medium of mined soils have specific textural characteristics and be graded and shaped to a topography similar to premining conditions. Also, crop productivity levels equivalent to those prior to mining must be achieved, especially for prime farmland. Alleviation of compaction has been the major focus of reclamation, and recently new techniques to augment the rooting zone with deep-ripping and loosening equipment have come to the forefront. Several surface mine operators in the Illinois coal basin are using deep tillage equipment that is capable of loosening soils to greater depths than is possible with conventional farm tillage equipment. Information on the beneficial effects of these loosening procedures on soil hydrological properties, such as infiltration, runoff potential, erosion, and water retention, is extremely important for future mined land management. However, such information is lacking. In view of the current yield demonstration regulation for prime farmland and other unmined soils, it is important that as much information as possible be obtained concerning the effect of deep tillage on soil hydrologic properties. The objectives of this study are: (1) to compare infiltration rates and related soil physical properties of mined soils reclaimed by various deep tillage treatments and (2) to study the temporal variability of infiltration and related physical properties of the reclaimed mined soil after deep tillage treatment

  6. Reforestation of surface mines on lands of VICC Land Company

    Science.gov (United States)

    Thomas F. Evans

    1980-01-01

    This Virginia coal company's surface mined lands show an adequate stocking of tree seedlings in terms of number per acre, but the distribution of seedlings has been affected by past reclamation practices. Natural reseeding has been an important contributor to the present seedling stock.

  7. Chapter 10: Establishing native trees on legacy surface mines

    Science.gov (United States)

    J.A. Burger; C.E. Zipper; P.N. Angel; N. Hall; J.G. Skousen; C.D. Barton; S. Eggerud

    2017-01-01

    More than 1 million acres have been surface mined for coal in the Appalachian region. Today, much of this land is unmanaged, unproductive, and covered with nonnative plants. Establishing productive forests on such lands will aid restoration of ecosystem services provided by forests—services such as watershed protection, water quality enhancement, carbon storage, and...

  8. Solution of underground mine gas emissions on surface of abandoned mining sites where steep deposited coal seams have been exploited

    Energy Technology Data Exchange (ETDEWEB)

    Takla, G.; Froml, K. [OKD, DPB, Paskov (Czech Republic)

    2005-07-01

    The solution of uncontrolled gas emissions from abandoned underground coal mine sites in Ostrava-Karvina coal-field to surface ground in connection with old mine shafts and drifts and with old mining workings in horizontal and inclined coal seams has many forms. It varies according to geological and mining conditions and the disposition of the site surface. Since four years the gas emission risk has appeared in the area of former exploited vertical coal seams within the historical centre of Orlova town, which is protected by State Monument Protection office. A project based on such special nature of mining-geological and urban conditions was elaborated and already implemented. (authors)

  9. Solution of underground mine gas emissions on surface of abandoned mining sites where steep deposited coal seams have been exploited

    International Nuclear Information System (INIS)

    Takla, G.; Froml, K.

    2005-01-01

    The solution of uncontrolled gas emissions from abandoned underground coal mine sites in Ostrava-Karvina coal-field to surface ground in connection with old mine shafts and drifts and with old mining workings in horizontal and inclined coal seams has many forms. It varies according to geological and mining conditions and the disposition of the site surface. Since four years the gas emission risk has appeared in the area of former exploited vertical coal seams within the historical centre of Orlova town, which is protected by State Monument Protection office. A project based on such special nature of mining-geological and urban conditions was elaborated and already implemented. (authors)

  10. Assessment of surface and subsurface ground disturbance due to underground mining

    International Nuclear Information System (INIS)

    Khair, A.W.

    1994-01-01

    This paper presents highlights of the research carried out at West Virginia University in order to assess surface and subsurface ground disturbance due to longwall mining. Extensive instrumentation and measurements have been made over three longwall mines in northern West Virginia during a three-year period. Various monitoring techniques including full profile borehole extensometer, full profile borehole inclinometers, time domain reflectometry, sonic reflection technique, a unique mechanical grouting method, photographic and visual observations, standard surveying, and water-level measurements were utilized. The paper's emphasis is first on surface ground movement and its impact on integrity of surface ground and structures and second on type and magnitude of subsurface ground movements associated with mine geometry and geology. A subsidence prediction model based on implementation of both mechanisms of ground movement around the excavation and the geologic and geotechnical properties of the rock/coal surrounding the excavation has been developed. 8 refs., 14 figs., 1 tab

  11. Simultaneous caving and surface restoration system for oil shale mining

    Energy Technology Data Exchange (ETDEWEB)

    Allsman, P.T.

    1968-10-01

    A modified caving method is introduced for mining oil shale and simultaneous restoration of the land surface by return of spent shale onto the subsided area. Other methods have been designed to mine the relatively thin richer beds occurring near outcrops in the Piceance Creek Basin of NW. Colorado. Since the discovery of the much thicker beds in the N.-central part of the basin, some attention has focused on in situ and open-pit methods of recovery. Although caving has been recognized as a possible means of mining shale, most people have been skeptical of its success. This stems from the unknown and salient factors of cavability and size of broken rock with caving. Wisdom would seem to dictate that serious evaluation of the caving method be made along with the other methods.

  12. Fifth symposium on surface mining and reclamation. NCA/BCR coal conference and Expo IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Fifth Symposium on Surface Mining and Reclamation, sponsored by the National Coal Association and Bituminous Coal Research, Inc., was held at the Kentucky Fair and Exposition Center, Louisville, Kentucky, October 18-20, 1977. Twenty-six papers from the proceedings have been entered individually into EDB and ERA. Topics covered include spoil bank revegetation, use of aerial photography, reclamation for row crop production, hydrology, computer programs related to this work, subirrigated alluvial valley floors, reclamation on steep slopes, mountain top removal, surface mine road design, successional processes involved in reclamation, land use planning, etc. (LTN)

  13. Analysis of Occupational Accidents in Underground and Surface Mining in Spain Using Data-Mining Techniques

    Directory of Open Access Journals (Sweden)

    Lluís Sanmiquel

    2018-03-01

    Full Text Available An analysis of occupational accidents in the mining sector was conducted using the data from the Spanish Ministry of Employment and Social Safety between 2005 and 2015, and data-mining techniques were applied. Data was processed with the software Weka. Two scenarios were chosen from the accidents database: surface and underground mining. The most important variables involved in occupational accidents and their association rules were determined. These rules are composed of several predictor variables that cause accidents, defining its characteristics and context. This study exposes the 20 most important association rules in the sector—either surface or underground mining—based on the statistical confidence levels of each rule as obtained by Weka. The outcomes display the most typical immediate causes, along with the percentage of accidents with a basis in each association rule. The most important immediate cause is body movement with physical effort or overexertion, and the type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident are different between the two scenarios. Data-mining techniques were chosen as a useful tool to find out the root cause of the accidents.

  14. Analysis of Occupational Accidents in Underground and Surface Mining in Spain Using Data-Mining Techniques

    Science.gov (United States)

    Sanmiquel, Lluís; Bascompta, Marc; Rossell, Josep M.; Anticoi, Hernán Francisco; Guash, Eduard

    2018-01-01

    An analysis of occupational accidents in the mining sector was conducted using the data from the Spanish Ministry of Employment and Social Safety between 2005 and 2015, and data-mining techniques were applied. Data was processed with the software Weka. Two scenarios were chosen from the accidents database: surface and underground mining. The most important variables involved in occupational accidents and their association rules were determined. These rules are composed of several predictor variables that cause accidents, defining its characteristics and context. This study exposes the 20 most important association rules in the sector—either surface or underground mining—based on the statistical confidence levels of each rule as obtained by Weka. The outcomes display the most typical immediate causes, along with the percentage of accidents with a basis in each association rule. The most important immediate cause is body movement with physical effort or overexertion, and the type of accident is physical effort or overexertion. On the other hand, the second most important immediate cause and type of accident are different between the two scenarios. Data-mining techniques were chosen as a useful tool to find out the root cause of the accidents. PMID:29518921

  15. Private and social costs of surface mine reforestation performance criteria.

    Science.gov (United States)

    Sullivan, Jay; Amacher, Gregory S

    2010-02-01

    We study the potentially unnecessary costs imposed by strict performance standards for forest restoration of surface coal mines in the Appalachian region under the Surface Mining Control and Reclamation Act of 1977 (SMCRA) that can vary widely across states. Both the unnecessary private costs to the mine operator and costs to society (social costs) are reported for two performance standards, a ground cover requirement, and a seedling survival target. These standards are examined using numerical analyses under a range of site productivity class and market conditions. We show that a strict (90%) ground cover standard may produce an unnecessary private cost of more than $700/ha and a social cost ranging from $428/ha to $710/ha, as compared with a 70% standard. A strict tree survival standard of 1235 trees/ha, as compared with the more typical 1087 trees/ha standard, may produce an unnecessary private cost of approximately $200/ha, and a social cost in the range of $120 to $208/ha. We conclude that strict performance standards may impose substantial unnecessary private costs and social costs, that strict performance standards may be discouraging the choice of forestry as a post-mining land use, and that opportunities exist for reform of reforestation performance standards. Our study provides a basis for evaluating tradeoffs between regulatory efficiency and optimal reforestation effort.

  16. Reforestation species study on a reclaimed surface mine in western Maryland

    Science.gov (United States)

    Jay A. Engle

    1980-01-01

    Westvaco Forest Research established a species comparison test including eighteen species of trees in the spring of 1978 on a recently reclaimed surface mine in Garrett County, Maryland. After two growing seasons height growth of all species has not been impressive. Seven species have better than 75 percent survival with pitch pine being best. Seven other species have...

  17. Selective bibliography of surface coal mining and reclamation literature. Volume 2. Interior Coal Province

    Energy Technology Data Exchange (ETDEWEB)

    Patricoski, M. L.; Daniels, L. K.; Sobek, A. A.

    1979-08-01

    This bibliography has been compiled for use by researchers, students, and other groups who need a reference source of published literature related to surface coal mining and reclamation in the Interior Coal Province. This bibliography contains more than 1300 references, including government reports, journal articles, symposium proceedings, industrial reports, workshop proceedings, theses, and bibliographies. A simple format was used to categorize citations.

  18. Assessment of the impact of underground mining on ground surface

    International Nuclear Information System (INIS)

    Toomik, Arvi

    1999-01-01

    The mine able oil shale bed is located in horizontally lying Ordovician limestones at a depth of 10-60 meters from the ground surface. Limestones are covered with Quaternary sediments, mainly till and loam, sporadically seams of clay occur. The overburden rocks of oil shale bed are jointed limestones with weak contacts between layers. The upper part of limestones is weakened additionally due to weathering to depths of 10-20 metres. Ground movements caused by mining reach the ground surface easily due to the shallow location of workings. The size and nature of these movements depend on mining and roof control methods used. In this study the impact of geotechnical processes on the ground surface caused by four different mining methods is analysed. A new, artificial micro relief is formed on undermined areas, where the ground surface depressions are alternating with rising grounds. When the Quaternary cover contains loamy sediments, the surface (rain) water will accumulate in the depressions. The response of usable lands on undermined areas depends on the degree of changes in the relief and water regime. There exists a maximum degree (limit) of changes of ground movements in case of which the changes in land use are not yet considerable. The factor of land deterioration was developed for arable and forest lands taking into account the character and degree of negative impacts. When no one deterioration factor exceeds the limit, the value of arable land will be 1.0 (100%). When some factor exceeds the limit, then water logging in subsidence troughs will diminish the value to 0.7, slopes to 0.8 and the area of weathered basic rocks to 0.9. In case of a combined effect of all these factors the value of arable land will fall to 0.5. As the long-term character of ground movement after room and pillar mining is not yet established, the factor for quasi stable areas is taken preliminarily as 0.9. Using detailed plans of mined out areas and the proposed factors, it is possible

  19. Productivity equation for reclaiming surface mines

    Science.gov (United States)

    Burley, Jon Bryan; Thomsen, Charles H.; Kenkel, Norm

    1989-09-01

    This article addresses the development of an agricultural productivity equation for predicting new soil (neo-sol) plant growth potential in Clay County, Minnesota, USA. Soil factors examined in the study include percent organic matter, percent slope, percent rock fragments, hydraulic conductivity, electrical conductivity, pH, topographic position, available water-holding capacity, bulk density, and percent clay. Squared terms and two-factor interaction terms were also examined as possible regressors. A best equation was selected that had a multiple coefficient of determination of 0.7399 and has five significant regressors and intercept with P.0001. The regressors are hydraulic conductivity, percent slope squared, bulk density times percent rock fragments, electrical conductivity times percent rock fragments, and electrical conductivity times percent organic matter. The regressors predict soil suitability for a general crop model. The crops included in the model are wheat, oats, barley, soybeans, sugar beets, sunflowers, and grasses/legumes.

  20. Damage to underground coal mines caused by surface blasting

    International Nuclear Information System (INIS)

    Fourie, A.B.; Green, R.W.

    1993-01-01

    An investigation of the potential damage to underground coal workings as a result of surface blasting at an opencast coal mine is described. Seismometers were installed in a worked out area of an underground mine, in the eastern Transvaal region of South Africa, and the vibration caused by nearby surface blasting recorded. These measurements were used to derive peak particle velocities. These velocities were correlated with observed damage underground in order to establish the allowable combination of the two blasting parameters of charge mass per relay, and blast-to-gage point distance. An upper limit of 110mm/sec peak particle velocity was found to be sufficient to ensure that the damage to the particular workings under consideration was minimal. It was further found that a cube-root scaling law provided a better fit to the field data than the common square-root law. 11 refs., 6 figs., 5 tabs

  1. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2005-06-22

    An area planted in 2004 on Bent Mountain in Pike County was shifted to the Department of Energy project to centralize an area to become a demonstration site. An additional 98.3 acres were planted on Peabody lands in western Kentucky and Bent Mountain to bring the total area under study by this project to 556.5 acres as indicated in Table 2. Major efforts this quarter include the implementation of new plots that will examine the influence of differing geologic material on tree growth and survival, water quality and quantity and carbon sequestration. Normal monitoring and maintenance was conducted and additional instrumentation was installed to monitor the new areas planted.

  2. Development and Application of Blast Casting Technique in Large-Scale Surface Mines: A Case Study of Heidaigou Surface Coal Mine in China

    Directory of Open Access Journals (Sweden)

    Li Ma

    2016-01-01

    Full Text Available Blast casting is a high-efficiency technique applied in surface mines for overburden removal and results in stripping cost savings. According to ballistic theory and center-of-mass frame basic movement principles, key factors influencing blast casting effect were analyzed, which include bench height and mining panel width, inclined angle of blast holes, explosive unit consumption (EUC, delay-time interval, presplitting, and blast hole pattern parameters. An intelligent design software was developed for obtaining better breaking and casting effect, and the error rates predicted with actual result can be controlled with 10%. Blast casting technique was successfully applied in Heidaigou Surface Coal Mine (HSCM with more than 34% of material casted into the inner dump. A ramp ditch was set within the middle inner dump for coal transportation. The procedure of stripping and excavating was implemented separately and alternately in the two sections around the middle ramp ditch. An unconstrained-nonlinear model was deduced for optimizing the shift distance of the middle ramp. The calculation results show that optimum shift distance of HSCM is 480 m, and the middle ditch should be shifted after 6 blast casting mining panels being stripped.

  3. Utilization of InSAR differential interferometry for surface deformation detection caused by mining

    Energy Technology Data Exchange (ETDEWEB)

    Yang, F. [Liaoning Technical Univ., Fuxin (China). School of Geomatics; Shao, Y. [Liaoning Technical Univ., Fuxin (China). Dept. of Foreign Language; Guichen, M. [Gifu Univ., Yanagido, Gifu (Japan). Dept. of Civil Engineering

    2010-07-01

    In China, the surface deformation of ground has been a significant geotechnical problem as a result of cracks in the ground surface, collapsing of house, and subsidence of roads. A powerful technology for detecting surface deformation in the ground is differential interferometry using synthetic aperture radar (INSAR). The technology enables the analysis from different phase of micro-wave between two observed data by synthetic aperture radar (SAR) of surface deformation of ground such as ground subsidence, land slide, and slope failure. In January 2006, the advanced land observing satellite was launched by the Japan Aerospace Exploration Agency. This paper presented an analytical investigation to detect ground subsidence or change caused by mining, overuse of ground water, and disaster. Specifically, the paper discussed the INSAR monitoring technology of the mine slope, including INSAR data sources and processing software; the principle of synthetic aperture radar interferometry; principles of differential SAR interferometry; and INSAR technology to slope monitoring of the Haizhou open pit mine. The paper also discussed the Haizhou strip mine side slope INSAR monitoring results and tests. It was concluded that the use of synthetic aperture radar interferometer technique was the optimal technique to provide three-dimensional spatial information and minimal change from ground surface by spatial remote sensing device. 18 refs., 5 figs.

  4. CARBON SEQUESTRATION ON SURFACE MINE LANDS

    Energy Technology Data Exchange (ETDEWEB)

    Donald H. Graves; Christopher Barton; Richard Sweigard; Richard Warner

    2005-02-25

    The October-December Quarter was dedicated to analyzing the first two years tree planting activities and evaluation of the results. This included the analyses of the species success at each of the sites and quantifying the data for future year determination of research levels. Additional detailed studies have been planned to further quantify total carbon storage accumulation on the research areas. At least 124 acres of new plantings will be established in 2005 to bring the total to 500 acres or more in the study area across the state of Kentucky. During the first 2 years of activities, 172,000 tree seedlings were planted on 257 acres in eastern Kentucky and 77,520 seedlings were planted on 119 acres in western Kentucky. The quantities of each species was discussed in the first Annual Report. A monitoring program was implemented to measure treatment effects on above and below ground C and nitrogen (N) pools and fluxes. A sampling strategy was devised that will allow for statistical comparisons of the various species within planting conditions and sites. Seedling heights and diameters are measured for initial status and re-measured on an annual basis. Leaves were harvested and leaf area measurements were performed. They were then dried and weighed and analyzed for C and N. Whole trees were removed to determine biomass levels and to evaluate C and N levels in all components of the trees. Clip plots were taken to determine herbaceous production and litter was collected in baskets and gathered each month to quantify C & N levels. Soil samples were collected to determine the chemical and mineralogical characterization of each area. The physical attributes of the soils are also being determined to provide information on the relative level of compaction. Hydrology and water quality monitoring is being conducted on all areas. Weather data is also being recorded that measures precipitation values, temperature, relative humidity wind speed and direction and solar radiation

  5. An Overview of Seabed Mining Including the Current State of Development, Environmental Impacts, and Knowledge Gaps

    Directory of Open Access Journals (Sweden)

    Kathryn A. Miller

    2018-01-01

    Full Text Available Rising demand for minerals and metals, including for use in the technology sector, has led to a resurgence of interest in exploration of mineral resources located on the seabed. Such resources, whether seafloor massive (polymetallic sulfides around hydrothermal vents, cobalt-rich crusts (CRCs on the flanks of seamounts or fields of manganese (polymetallic nodules on the abyssal plains, cannot be considered in isolation of the distinctive, in some cases unique, assemblages of marine species associated with the same habitats and structures. In addition to mineral deposits, there is interest in extracting methane from gas hydrates on continental slopes and rises. Many of the regions identified for future seabed mining are already recognized as vulnerable marine ecosystems (VMEs. Since its inception in 1982, the International Seabed Authority (ISA, charged with regulating human activities on the deep-sea floor beyond the continental shelf, has issued 27 contracts for mineral exploration, encompassing a combined area of more than 1.4 million km2, and continues to develop rules for commercial mining. At the same time, some seabed mining operations are already taking place within continental shelf areas of nation states, generally at relatively shallow depths, and with others at advanced stages of planning. The first commercial enterprise, expected to target mineral-rich sulfides in deeper waters, at depths between 1,500 and 2,000 m on the continental shelf of Papua New Guinea, is scheduled to begin early in 2019. In this review, we explore three broad aspects relating to the exploration and exploitation of seabed mineral resources: (1 the current state of development of such activities in areas both within and beyond national jurisdictions, (2 possible environmental impacts both close to and more distant from mining activities and (3 the uncertainties and gaps in scientific knowledge and understanding which render baseline and impact assessments

  6. 30 CFR 933.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE NORTH CAROLINA § 933.761 Areas designated unsuitable for surface coal mining by Act of Congress. Part 761 of this chapter, Areas Designated Unsuitable for Coal Mining by Act of Congress, with the exception of §§ 761.11(c) and 761.12(f)(1), shall apply to surface coal mining and reclamation...

  7. 30 CFR 942.800 - Bond and insurance requirements for surface coal mining and reclamation operations.

    Science.gov (United States)

    2010-07-01

    ... required for postmining water treatment must remain bonded. However, the trust fund or annuity may serve as... coal mining and reclamation operations. 942.800 Section 942.800 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING...

  8. Surface mining machines problems of maintenance and modernization

    CERN Document Server

    Rusiński, Eugeniusz; Moczko, Przemysław; Pietrusiak, Damian

    2017-01-01

    This unique volume imparts practical information on the operation, maintenance, and modernization of heavy performance machines such as lignite mine machines, bucket wheel excavators, and spreaders. Problems of large scale machines (mega machines) are highly specific and not well recognized in the common mechanical engineering environment. Prof. Rusiński and his co-authors identify solutions that increase the durability of these machines as well as discuss methods of failure analysis and technical condition assessment procedures. "Surface Mining Machines: Problems in Maintenance and Modernization" stands as a much-needed guidebook for engineers facing the particular challenges of heavy performance machines and offers a distinct and interesting demonstration of scale-up issues for researchers and scientists from across the fields of machine design and mechanical engineering.

  9. Data-Mining-Based Intelligent Differential Relaying for Transmission Lines Including UPFC and Wind Farms.

    Science.gov (United States)

    Jena, Manas Kumar; Samantaray, Subhransu Ranjan

    2016-01-01

    This paper presents a data-mining-based intelligent differential relaying scheme for transmission lines, including flexible ac transmission system device, such as unified power flow controller (UPFC) and wind farms. Initially, the current and voltage signals are processed through extended Kalman filter phasor measurement unit for phasor estimation, and 21 potential features are computed at both ends of the line. Once the features are extracted at both ends, the corresponding differential features are derived. These differential features are fed to a data-mining model known as decision tree (DT) to provide the final relaying decision. The proposed technique has been extensively tested for single-circuit transmission line, including UPFC and wind farms with in-feed, double-circuit line with UPFC on one line and wind farm as one of the substations with wide variations in operating parameters. The test results obtained from simulation as well as in real-time digital simulator testing indicate that the DT-based intelligent differential relaying scheme is highly reliable and accurate with a response time of 2.25 cycles from the fault inception.

  10. Effect of Traditional Gold Mining to Surface Water Quality in Murung Raya District, Central Kalimantan Province

    OpenAIRE

    Wilopo, W; Resili, R; Putra, D P E

    2013-01-01

    There are many locations for traditional gold mining in Indonesia. One of these is in Murung Raya District, Central Kalimantan Province. Mining activities involving the application of traditional gold processing technology have a high potential to pollute the environment, especially surface water. Therefore, this study aims to determine the impact of gold mining and processing on surface water quality around the mine site. Based on the results of field surveys and laboratory analysis, our dat...

  11. Ceramic substrate including thin film multilayer surface conductor

    Energy Technology Data Exchange (ETDEWEB)

    Wolf, Joseph Ambrose; Peterson, Kenneth A.

    2017-05-09

    A ceramic substrate comprises a plurality of ceramic sheets, a plurality of inner conductive layers, a plurality of vias, and an upper conductive layer. The ceramic sheets are stacked one on top of another and include a top ceramic sheet. The inner conductive layers include electrically conductive material that forms electrically conductive features on an upper surface of each ceramic sheet excluding the top ceramic sheet. The vias are formed in each of the ceramic sheets with each via being filled with electrically conductive material. The upper conductive layer includes electrically conductive material that forms electrically conductive features on an upper surface of the top ceramic sheet. The upper conductive layer is constructed from a stack of four sublayers. A first sublayer is formed from titanium. A second sublayer is formed from copper. A third sublayer is formed from platinum. A fourth sublayer is formed from gold.

  12. Combining a Spatial Model and Demand Forecasts to Map Future Surface Coal Mining in Appalachia.

    Science.gov (United States)

    Strager, Michael P; Strager, Jacquelyn M; Evans, Jeffrey S; Dunscomb, Judy K; Kreps, Brad J; Maxwell, Aaron E

    2015-01-01

    Predicting the locations of future surface coal mining in Appalachia is challenging for a number of reasons. Economic and regulatory factors impact the coal mining industry and forecasts of future coal production do not specifically predict changes in location of future coal production. With the potential environmental impacts from surface coal mining, prediction of the location of future activity would be valuable to decision makers. The goal of this study was to provide a method for predicting future surface coal mining extents under changing economic and regulatory forecasts through the year 2035. This was accomplished by integrating a spatial model with production demand forecasts to predict (1 km2) gridded cell size land cover change. Combining these two inputs was possible with a ratio which linked coal extraction quantities to a unit area extent. The result was a spatial distribution of probabilities allocated over forecasted demand for the Appalachian region including northern, central, southern, and eastern Illinois coal regions. The results can be used to better plan for land use alterations and potential cumulative impacts.

  13. Combining a Spatial Model and Demand Forecasts to Map Future Surface Coal Mining in Appalachia.

    Directory of Open Access Journals (Sweden)

    Michael P Strager

    Full Text Available Predicting the locations of future surface coal mining in Appalachia is challenging for a number of reasons. Economic and regulatory factors impact the coal mining industry and forecasts of future coal production do not specifically predict changes in location of future coal production. With the potential environmental impacts from surface coal mining, prediction of the location of future activity would be valuable to decision makers. The goal of this study was to provide a method for predicting future surface coal mining extents under changing economic and regulatory forecasts through the year 2035. This was accomplished by integrating a spatial model with production demand forecasts to predict (1 km2 gridded cell size land cover change. Combining these two inputs was possible with a ratio which linked coal extraction quantities to a unit area extent. The result was a spatial distribution of probabilities allocated over forecasted demand for the Appalachian region including northern, central, southern, and eastern Illinois coal regions. The results can be used to better plan for land use alterations and potential cumulative impacts.

  14. Northern bobwhite breeding season ecology on a reclaimed surface mine

    Science.gov (United States)

    Brooke, Jarred M.; Tanner, Evan P.; Peters, David C.; Tanner, Ashley M.; Harper, Craig A.; Keyser, Patrick D.; Clark, Joseph D.; Morgan, John J.

    2017-01-01

    Surface coal mining and subsequent reclamation of surface mines have converted large forest areas into early successional vegetative communities in the eastern United States. This reclamation can provide a novel opportunity to conserve northern bobwhite (Colinus virginianus). We evaluated the influence of habitat management activities on nest survival, nest-site selection, and brood resource selection on managed and unmanaged units of a reclaimed surface mine, Peabody Wildlife Management Area (Peabody), in west-central Kentucky, USA, from 2010 to 2013. We compared resource selection, using discrete-choice analysis, and nest survival, using the nest survival model in Program MARK, between managed and unmanaged units of Peabody at 2 spatial scales: the composition and configuration of vegetation types (i.e., macrohabitat) and vegetation characteristics at nest sites and brood locations (i.e., microhabitat). On managed sites, we also investigated resource selection relative to a number of different treatments (e.g., herbicide, disking, prescribed fire). We found no evidence that nest-site selection was influenced by macrohabitat variables, but bobwhite selected nest sites in areas with greater litter depth than was available at random sites. On managed units, bobwhite were more likely to nest where herbicide was applied to reduce sericea lespedeza (Lespedeza cuneata) compared with areas untreated with herbicide. Daily nest survival was not influenced by habitat characteristics or by habitat management but was influenced by nest age and the interaction of nest initiation date and nest age. Daily nest survival was greater for older nests occurring early in the breeding season (0.99, SE < 0.01) but was lower for older nests occurring later in the season (0.08, SE = 0.13). Brood resource selection was not influenced by macrohabitat or microhabitat variables we measured, but broods on managed units selected areas treated with herbicide to control sericea lespedeza

  15. Preliminary analysis of surface mining options for Naval Oil Shale Reserve 1

    Energy Technology Data Exchange (ETDEWEB)

    1981-07-20

    The study was undertaken to determine the economic viability of surface mining to exploit the reserves. It is based on resource information already developed for NOSR 1 and conceptual designs of mining systems compatible with this resource. Environmental considerations as they relate to surface mining have been addressed qualitatively. The conclusions on economic viability were based primarily on mining costs projected from other industries using surface mining. An analysis of surface mining for the NOSR 1 resource was performed based on its particular overburden thickness, oil shale thickness, oil shale grade, and topography. This evaluation considered reclamation of the surface as part of its design and cost estimate. The capital costs for mining 25 GPT and 30 GPT shale and the operating costs for mining 25 GPT, 30 GPT, and 35 GPT shale are presented. The relationship between operating cost and stripping ratio, and the break-even stripping ratio (BESR) for surface mining to be competitive with room-and-pillar mining, are shown. Identification of potential environmental impacts shows that environmental control procedures for surface mining are more difficult to implement than those for underground mining. The following three areas are of prime concern: maintenance of air quality standards by disruption, movement, and placement of large quantities of overburden; disruption or cutting of aquifers during the mining process which affect area water supplies; and potential mineral leaching from spent shales into the aquifers. Although it is an operational benefit to place spent shale in the open pit, leaching of the spent shales and contamination of the water is detrimental. It is therefore concluded that surface mining on NOSR 1 currently is neither economically desirable nor environmentally safe. Stringent mitigation measures would have to be implemented to overcome some of the potential environmental hazards.

  16. Response of transplanted aspen to irrigation and weeding on a Colorado reclaimed surface coal mine

    Science.gov (United States)

    Robert C. Musselman; Wayne D. Shepperd; Frederick W. Smith; Lance A. Asherin; Brian W. Gee

    2012-01-01

    Successful re-establishment of aspen (Populus tremuloides Michx.) on surface-mined lands in the western United States is problematic because the species generally regenerates vegetatively by sprouting from parent roots in the soil; however, topsoil is removed in the mining process. Previous attempts to plant aspen on reclaimed mine sites have failed because...

  17. Monitoring of tritium-contaminated surfaces, including skin

    International Nuclear Information System (INIS)

    Surette, R.A.; Wood, M.J.

    1994-05-01

    We have examined various commercially available tritium surface contamination monitors along with different swipe media and techniques for direct and indirect (swipe) monitoring of contaminated surfaces, including skin. None of the methods or instruments evaluated were more sensitive than the swipe and liquid scintillation counting (LSC) method. Swipe measurements with open-window proportional counters were, in general, less than half as sensitive as LSC, but have the advantages of having the results available almost immediately, and no sample preparation is required. The Nuclear Measurement Corporation's PC-55 is the most suitable instrument we tested for the analysis of routine swipe measurement. The PC-55 was about one third as sensitive as LSC when used with Ontario Hydro filter paper swipe media. Surface contamination measurement results can be obtained within minutes using the PC-55, compared to hours using LSC. The selection of swipe media for use with proportional counter-based instruments is critical. A medium that is electrically insulating can develop an electrostatic charge on its surface; this may alter the field gradient in the detector and may adversely influence the results. Although the PC-55 is sufficiently sensitive and very convenient, operational experience with the instrument is needed before recommending that it replace current LSC methods. The PC-55's susceptibility to internal tritium contamination may limit its practical usefulness. Because of the complexity of using live animals to evaluate direct and indirect methods for assessing skin contamination, pig skin was investigated as a possible substitute. We concluded that, for the first few hours post-exposure, pig skin mimics the kinetics of animal skin that has contacted a tritium-contaminated surface. (author). 30 refs., 1 tab., 7 figs

  18. Gas migration from closed coal mines to the surface. Risk assessment methodology and prevention means

    International Nuclear Information System (INIS)

    Pokryszka, Z.; Tauziede, Ch.; Lagny, C.; Guise, Y.; Gobillot, R.; Planchenault, J.M.; Lagarde, R.

    2005-01-01

    French law as regards renunciation to mining concessions calls for the mining operator to first undertake analyses of the risks represented by their underground mining works. The problem of gas migration to the surface is especially significant in the context of coal mines. This is because mine gas can migrate to the earth's surface, then present significant risks: explosion, suffocation or gas poisoning risks. As part of the scheduled closure of all coal mining operations in France, INERIS has drawn up, at the request of national mining operator Charbonnages de France, a general methodology for assessing the risk linked to gas in the context of closed coal mines. This article presents the principles of this methodology. An application example based on a true case study is then described. This is completed by a presentation of the preventive and monitoring resources recommended and usually applied in order to manage the risk linked to gaseous emissions. (authors)

  19. Soil macropores: Control on infiltration, hillslope and surface hydrology on a reclaimed surface-mined watershed

    International Nuclear Information System (INIS)

    Guebert, M.D.; Gardner, T.W.

    1992-01-01

    The hydrologic response of a surface-mined watershed in central Pennsylvania is controlled by rapid macropore flow within the unsaturated man-made topsoil. Newly reclaimed surface-mined watersheds in central Pennsylvania exhibit low steady-state infiltration rates (1--2 cm/hr) and produce runoff dominated by infiltration-excess overland flow. However, within four years after reclamation, infiltration rates on some mine surfaces approach premined rates (8 cm/hr). As infiltration rate increases, the volume of infiltrated water increases, but the total porosity of minesoil matrix remains constant. There is little change in the surface discharge volume, indicating that infiltrated water continues to contribute to the basin surface discharge by the processes of throughflow and return flow. Throughflow in the topsoil horizon occurs in rapid response to rainfall input, producing large volumes of water with throughflow rates closely related to rainfall rates and with throughflow peaks following rainfall peaks by only minutes. Increased return flow alters the shape of the surface runoff hydrograph by slightly lagging behind infiltration excess overland flow. These changes in the shape of the surface runoff hydrograph reduce the potential for severe gully erosion on the reclaimed site. In addition, throughflow water remains predominantly in the topsoil horizon, and therefore has limited contact with potentially acid-producing backfill. Better understanding of macropore flow processes in reclaimed minesoils will help investigators evaluate past strategies and develop new reclamation techniques that will minimize the short-term surface erosional effects of mining and reclamation, while optimizing the long-term effluent and groundwater quality

  20. 30 CFR 941.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE SOUTH DAKOTA § 941.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  1. 30 CFR 937.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE OREGON § 937.761 Areas designated unsuitable for surface coal mining by Act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining and... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  2. 30 CFR 905.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE CALIFORNIA § 905.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  3. 30 CFR 910.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE GEORGIA § 910.761 Areas designated unsuitable for surface coal mining by Act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  4. 30 CFR 903.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE ARIZONA § 903.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, applies to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  5. 30 CFR 939.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE RHODE ISLAND § 939.761 Areas designated unsuitable for surface coal mining by Act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  6. 30 CFR 922.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE MICHIGAN § 922.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  7. 30 CFR 921.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE MASSACHUSETTS § 921.761 Areas designated unsuitable for surface coal mining by Act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  8. 30 CFR 912.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE IDAHO § 912.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining and... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  9. 30 CFR 947.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE WASHINGTON § 947.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  10. 30 CFR 942.761 - Areas designated unsuitable for surface coal mining by act of Congress.

    Science.gov (United States)

    2010-07-01

    ... WITHIN EACH STATE TENNESSEE § 942.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal...

  11. 43 CFR 20.402 - Interests in underground or surface coal mining operations.

    Science.gov (United States)

    2010-10-01

    ... Certain Employees of the Department § 20.402 Interests in underground or surface coal mining operations...) Indirect financial interest in underground or surface coal mining operations means the same financial... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Interests in underground or surface coal...

  12. Impacts of surface gold mining on land use systems in Western Ghana.

    Science.gov (United States)

    Schueler, Vivian; Kuemmerle, Tobias; Schröder, Hilmar

    2011-07-01

    Land use conflicts are becoming increasingly apparent from local to global scales. Surface gold mining is an extreme source of such a conflict, but mining impacts on local livelihoods often remain unclear. Our goal here was to assess land cover change due to gold surface mining in Western Ghana, one of the world's leading gold mining regions, and to study how these changes affected land use systems. We used Landsat satellite images from 1986-2002 to map land cover change and field interviews with farmers to understand the livelihood implications of mining-related land cover change. Our results showed that surface mining resulted in deforestation (58%), a substantial loss of farmland (45%) within mining concessions, and widespread spill-over effects as relocated farmers expand farmland into forests. This points to rapidly eroding livelihood foundations, suggesting that the environmental and social costs of Ghana's gold boom may be much higher than previously thought.

  13. Feasibility of a continuous surface mining machine using impact breakers. First quarterly report, October 1-December 31, 1979

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, A. T.

    1980-01-01

    This is the first quarterly report on the efforts to evaluate the feasibility of excavating coal and overburden from surface mines using impact breakers. The initial stages of the project are devoted to a literature search, equipment selection, test site selection, and conceptual test system design. Hence, this report details the progress made in these areas; the next quarter will see the finalization of Phase I. Included as appendices to this report are FMA internal reports on the individual mines visited. These reports are the basis of the test site selection, and have been censored here to remove data the mine operators deemed as confidential.

  14. Abandoned Uranium Mine (AUM) Surface Areas, Navajo Nation, 2016, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — This GIS dataset contains polygon features that represent all Abandoned Uranium Mines (AUMs) on or within one mile of the Navajo Nation. Attributes include mine...

  15. Finite element modeling of surface subsidence induced by underground coal mining

    International Nuclear Information System (INIS)

    Su, D.W.H.

    1992-01-01

    The ability to predict the effects of longwall mining on topography and surface structures is important for any coal company in making permit applications and anticipating potential mining problems. The sophisticated finite element model described and evaluated in this paper is based upon five years of underground and surface observations and evolutionary development of modeling techniques and attributes. The model provides a very powerful tool to address subsidence and other ground control questions. The model can be used to calculate postmining stress and strain conditions at any horizon between the mine and the ground surface. This holds the promise of assisting in the prediction of mining-related hydrological effects

  16. Possible use of wetlands in ecological restoration of surface mined lands

    International Nuclear Information System (INIS)

    Atkinson, R.B.; Cairns, J. Jr.

    1994-01-01

    Surface mining for coal has dramatically altered millions of hectares throughout the Appalachian region of eastern North America. Flat benches and vertical high walls have replaced well-drained slopes, and wetlands have developed 'accidentally' on abandoned benches. Surface mining is continuing in this region, but new regulations do not include specifications for wetland construction in the reclamation process. Recent research has suggested that many ecosystem services appropriate for the Appalachian landscape could be performed by constructed wetlands. Inclusion of wetland construction in a reclamation plan could lead to a net increase in wetland acreage locally, as well as offset the loss of natural and/or accidental wetlands that are constructed to enhance nontreatment goals in reclamation. Study sites included 14 emergent wetlands in Wise County, Virginia. Sampling in June and August detected a total of 94 species in 36 vascular plant facilities. Obligate wetlands species, species that occur in wetlands over 99% of the time, were found in all 14 sites and included 26 species. The presence of so many wetland species without intentional management efforts suggests that wetland establishment could become a common component of mine reclamation. 18 refs., 2 tabs

  17. Restoration of surface-mined lands with rainfall harvesting

    Energy Technology Data Exchange (ETDEWEB)

    Sauer, R.H.; Rickard, W.H.

    1982-12-01

    Strip mining for coal in the arid western US will remove grazing land as energy demands are met. Conventional resotration usually includes leveling the spoil banks and covering them with top soil, fertilizing, seeding and irrigation with well or river water. An overview of research on an alternate method of restoring this land is reported. From 1976 through 1981 studies were conducted on the use of water harvesting, the collection and use of rainfall runoff, to restore the vegetative productivity of strip mined lands in arid regions. These studies tested the technical and economic feasibility of using partially leveled spoil banks at strip mines as catchment areas to collect and direct runoff to the topsoiled valley floor where crops were cultivated. Information was collected on the efficiency of seven treatments to increase runoff from the catchment areas and on the productivity of seven crops. The experiments were conducted in arid areas of Washington, Arizona, and Colorado. It was concluded that water harvesting can replace or augment expensive and inadequate supplies of well and river water in arid regions with a suitable climate. These studies showed that some treatments provided adequate runoff to produce a useful crop in the valleys, thus making this alternative approach to restoration technically feasible. This approach was also potentially economically feasible where the treatment costs of the catchment areas were low, the treatment was effective, the crop was productive and valuable, and earthmoving costs were lower than with conventional restoration involving complete leveling of spoil banks. It was also concluded that water harvesting can be made more effective with further information on catchment area treatments, which crops are most adaptable to water harvesting, the optimum incline of the catchment areas and climatic influences on water harvesting.

  18. Usage of emulsion explosives on surface open pit mine “Zelenikovec” - Skopje

    OpenAIRE

    Dambov, Risto; Bosevski, Trajce

    2013-01-01

    This paper describes the advantages of using emulsion explosives on the surface mine ”Zelenikovec”. A comparison has been made with the other types of explosives regarding the cost of drilling, blasting, environmental protection and the safety while using them. In the estimates, the criteria for using this type of emulsion explosives on the surface mine “Zelenikovec” have been met.

  19. 30 CFR 57.4131 - Surface fan installations and mine openings.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Surface fan installations and mine openings. 57... Fire Prevention and Control Prohibitions/precautions/housekeeping § 57.4131 Surface fan installations... stored within 100 feet of mine openings or within 100 feet of fan installations used for underground...

  20. Surface water quality associated with the surface mining of Iowa coal

    Energy Technology Data Exchange (ETDEWEB)

    Gulliford, J.B.; Wildman, R.B.; Payne, L.K.

    1977-11-07

    The findings of an exhaustive study of coal mining and coal preparation industries are reviewed for the purpose of developing limitation guidelines and performance standards. Successful technologies are discussed for treatment of acid mine water collected in settling ponds. A combination of limestone (less expensive, safer to handle, most effective at low pH levels) and lime (more effective in neutralizing at higher pH's) is recommended when cost is an important consideration, as in Iowa mining. We recommend two ponds, with raw water entering the second pond after treatment with limestone/lime on a regulated dose/flow rate with thorough mixing. The second pond would serve a clarifying purpose for settling of the floc of insoluble sulfates and hydroxides. Adequate retention time is important before discharge of the effluent to the receiving stream. We are confident that the effluent from this secondary pond could be expected to meet EPA and DEQ standards if the pH of the treated water were raised to 7 to 9. EPA has documented these performance standards at the mining operations included in their study. The engineering and application costs of this treatment method should be well within reach of Iowa mining companies.

  1. LANDSAT remote sensing: observations of an Appalachian mountaintop surface coal mining and reclamation operation

    International Nuclear Information System (INIS)

    1979-10-01

    The potential benefits of using LANDSAT remote sensing data by state agencies as an aide in monitoring surface coal mining operations are reviewed. A mountaintop surface mine in eastern Kentucky was surveyed over a 5 year period using satellite multispectral scanner data that were classified by computer analyses. The analyses were guided by aerial photography and by ground surveys of the surface mines procured in 1976. The application of the LANDSAT data indicates that: (1) computer classification of the various landcover categories provides information for monitoring the progress of surface mining and reclamation operations, (2) successive yearly changes in barren and revegetated areas can be qualitatively assessed for surface mines of 100 acres or more of disrupted area, (3) barren areas consisting of limestone and shale mixtures may be recognized, and revegetated areas in various stages of growth may be identified against the hilly forest background

  2. Exploration Technology Development including Surface Acoustic Wave RFID chips

    Data.gov (United States)

    National Aeronautics and Space Administration — This project is focused on maturing future surface exploration technologies and instrumentation and working towards flight instrumentation and systems to support...

  3. 75 FR 64411 - Lowering Miners' Exposure to Respirable Coal Mine Dust, Including Continuous Personal Dust Monitors

    Science.gov (United States)

    2010-10-19

    ... proposed rule is an important element in MSHA's Comprehensive Initiative to ``End Black Lung--Act Now..., and chronic bronchitis, known collectively as ``black lung.'' These diseases are debilitating... reducing the respirable coal mine dust levels, miners continue to develop black lung. Based on recent data...

  4. Analysis of Nature of Science Included in Recent Popular Writing Using Text Mining Techniques

    Science.gov (United States)

    Jiang, Feng; McComas, William F.

    2014-01-01

    This study examined the inclusion of nature of science (NOS) in popular science writing to determine whether it could serve supplementary resource for teaching NOS and to evaluate the accuracy of text mining and classification as a viable research tool in science education research. Four groups of documents published from 2001 to 2010 were…

  5. Restoring forests and associated ecosystem services on appalachian coal surface mines.

    Science.gov (United States)

    Zipper, Carl E; Burger, James A; Skousen, Jeffrey G; Angel, Patrick N; Barton, Christopher D; Davis, Victor; Franklin, Jennifer A

    2011-05-01

    Surface coal mining in Appalachia has caused extensive replacement of forest with non-forested land cover, much of which is unmanaged and unproductive. Although forested ecosystems are valued by society for both marketable products and ecosystem services, forests have not been restored on most Appalachian mined lands because traditional reclamation practices, encouraged by regulatory policies, created conditions poorly suited for reforestation. Reclamation scientists have studied productive forests growing on older mine sites, established forest vegetation experimentally on recent mines, and identified mine reclamation practices that encourage forest vegetation re-establishment. Based on these findings, they developed a Forestry Reclamation Approach (FRA) that can be employed by coal mining firms to restore forest vegetation. Scientists and mine regulators, working collaboratively, have communicated the FRA to the coal industry and to regulatory enforcement personnel. Today, the FRA is used routinely by many coal mining firms, and thousands of mined hectares have been reclaimed to restore productive mine soils and planted with native forest trees. Reclamation of coal mines using the FRA is expected to restore these lands' capabilities to provide forest-based ecosystem services, such as wood production, atmospheric carbon sequestration, wildlife habitat, watershed protection, and water quality protection to a greater extent than conventional reclamation practices.

  6. Restoring Forests and Associated Ecosystem Services on Appalachian Coal Surface Mines

    Science.gov (United States)

    Zipper, Carl E.; Burger, James A.; Skousen, Jeffrey G.; Angel, Patrick N.; Barton, Christopher D.; Davis, Victor; Franklin, Jennifer A.

    2011-05-01

    Surface coal mining in Appalachia has caused extensive replacement of forest with non-forested land cover, much of which is unmanaged and unproductive. Although forested ecosystems are valued by society for both marketable products and ecosystem services, forests have not been restored on most Appalachian mined lands because traditional reclamation practices, encouraged by regulatory policies, created conditions poorly suited for reforestation. Reclamation scientists have studied productive forests growing on older mine sites, established forest vegetation experimentally on recent mines, and identified mine reclamation practices that encourage forest vegetation re-establishment. Based on these findings, they developed a Forestry Reclamation Approach (FRA) that can be employed by coal mining firms to restore forest vegetation. Scientists and mine regulators, working collaboratively, have communicated the FRA to the coal industry and to regulatory enforcement personnel. Today, the FRA is used routinely by many coal mining firms, and thousands of mined hectares have been reclaimed to restore productive mine soils and planted with native forest trees. Reclamation of coal mines using the FRA is expected to restore these lands' capabilities to provide forest-based ecosystem services, such as wood production, atmospheric carbon sequestration, wildlife habitat, watershed protection, and water quality protection to a greater extent than conventional reclamation practices.

  7. Selective bibliography of surface coal mining and reclamation literature. Volume 1. Eastern coal province. [More than 1300 references

    Energy Technology Data Exchange (ETDEWEB)

    Weiss, N. E.; Sobek, A. A.; Streib, D. L.

    1977-11-01

    This bibliography has been compiled for use by researchers, students, and other groups who need a reference source of published literature related to surface coal mining and reclamation in the Eastern Coal Province. This bibliography contains more than 1300 references including government reports, journal articles, symposium proceedings, industrial reports, workshop proceedings, theses, and bibliographices. A simple format was used to categorize citations.

  8. Olkiluoto surface hydrological modelling: Update 2012 including salt transport modelling

    International Nuclear Information System (INIS)

    Karvonen, T.

    2013-11-01

    Posiva Oy is responsible for implementing a final disposal program for spent nuclear fuel of its owners Teollisuuden Voima Oyj and Fortum Power and Heat Oy. The spent nuclear fuel is planned to be disposed at a depth of about 400-450 meters in the crystalline bedrock at the Olkiluoto site. Leakages located at or close to spent fuel repository may give rise to the upconing of deep highly saline groundwater and this is a concern with regard to the performance of the tunnel backfill material after the closure of the tunnels. Therefore a salt transport sub-model was added to the Olkiluoto surface hydrological model (SHYD). The other improvements include update of the particle tracking algorithm and possibility to estimate the influence of open drillholes in a case where overpressure in inflatable packers decreases causing a hydraulic short-circuit between hydrogeological zones HZ19 and HZ20 along the drillhole. Four new hydrogeological zones HZ056, HZ146, BFZ100 and HZ039 were added to the model. In addition, zones HZ20A and HZ20B intersect with each other in the new structure model, which influences salinity upconing caused by leakages in shafts. The aim of the modelling of long-term influence of ONKALO, shafts and repository tunnels provide computational results that can be used to suggest limits for allowed leakages. The model input data included all the existing leakages into ONKALO (35-38 l/min) and shafts in the present day conditions. The influence of shafts was computed using eight different values for total shaft leakage: 5, 11, 20, 30, 40, 50, 60 and 70 l/min. The selection of the leakage criteria for shafts was influenced by the fact that upconing of saline water increases TDS-values close to the repository areas although HZ20B does not intersect any deposition tunnels. The total limit for all leakages was suggested to be 120 l/min. The limit for HZ20 zones was proposed to be 40 l/min: about 5 l/min the present day leakages to access tunnel, 25 l/min from

  9. Atlas of western surface-mined lands: coal, uranium, and phosphate

    International Nuclear Information System (INIS)

    Evans, A.K.; Uhleman, E.W.; Eby, P.A.

    1978-01-01

    The atlas contains available information on all coal, uranium, and phosphate surface mines in excess of 10 acres that were in operation prior to 1976 in the western 11 contiguous states plus North Dakota and South Dakota. It is assembled in a format that allows a systematic and comprehensive review of surface-mined lands so that appropriate areas can be selected for intensive biological assessment of natural and man-induced revegetation and refaunation. For each identified mine, the following information has been obtained wherever possible: geographic location and locating instructions, operator and surface and subsurface ownership, summary of the mining plan and methods, summary of the reclamation plan and methods, dates of operation, area affected by mining activities, reclamation history, where applicable, and current land use and vegetation conditions

  10. Large Omnivore Movements in Response to Surface Mining and Mine Reclamation.

    Science.gov (United States)

    Cristescu, Bogdan; Stenhouse, Gordon B; Boyce, Mark S

    2016-01-11

    Increasing global demands have resulted in widespread proliferation of resource extraction. Scientists are challenged to develop environmental mitigation strategies that meet societal expectations of resource supply, while achieving minimal disruption to sensitive "wilderness" species. We used GPS collar data from a 9-year study on grizzly bears (Ursus arctos) (n = 18) in Alberta, Canada to assess movements and associated space use during versus after mining. Grizzly bear home range overlap with mined areas was lower during active mining except for females with cubs, that also had shortest movements on active mines. However, both females with cubs and males made shorter steps when on/close to mines following mine closure and reclamation. Our results show differences in bear movement and space-use strategies, with individuals from a key population segment (females with cubs) appearing most adaptable to mining disturbance. Preserving patches of original habitat, reclaiming the landscape and minimizing the risk of direct human-induced mortality during and after development can help conserve bears and other wildlife on industrially modified landscapes.

  11. Including Finite Surface Span Effects in Empirical Jet-Surface Interaction Noise Models

    Science.gov (United States)

    Brown, Clifford A.

    2016-01-01

    The effect of finite span on the jet-surface interaction noise source and the jet mixing noise shielding and reflection effects is considered using recently acquired experimental data. First, the experimental setup and resulting data are presented with particular attention to the role of surface span on far-field noise. These effects are then included in existing empirical models that have previously assumed that all surfaces are semi-infinite. This extended abstract briefly describes the experimental setup and data leaving the empirical modeling aspects for the final paper.

  12. IDENTIFYING RECENT SURFACE MINING ACTIVITIES USING A NORMALIZED DIFFERENCE VEGETATION INDEX (NDVI) CHANGE DETECTION METHOD

    Science.gov (United States)

    Coal mining is a major resource extraction activity on the Appalachian Mountains. The increased size and frequency of a specific type of surface mining, known as mountain top removal-valley fill, has in recent years raised various environmental concerns. During mountainto...

  13. Water resources and effects of potential surface coal mining on dissolved solids in Hanging Woman Creek basin, southeastern Montana

    Science.gov (United States)

    Cannon, M.R.

    1989-01-01

    Groundwater resources of the Hanging Woman Creek basin, Montana include Holocene and Pleistocene alluvial aquifers and sandstone , coal, and clinker aquifers in the Paleocene Fort Union Formation. Surface water resources are composed of Hanging Woman Creek, its tributaries, and small stock ponds. Dissolved-solids concentrations in groundwater ranged from 200 to 11,00 mg/L. Generally, concentrations were largest in alluvial aquifers and smallest in clinker aquifers. Near its mouth, Hanging Woman Creek had a median concentration of about 1,800 mg/L. Mining of the 20-foot to 35-foot-thick Anderson coal bed and 3-foot to 16-foot thick Dietz coal bed could increase dissolved-solids concentrations in shallow aquifers and in Hanging Woman Creek because of leaching of soluble minerals from mine spoils. Analysis of saturated-paste extracts from 158 overburden samples indicated that water moving through mine spoils would have a median increase in dissolved-solids concentration of about 3,700 mg/L, resulting in an additional dissolved-solids load to Hanging Woman Creek of about 3.0 tons/day. Hanging Woman Creek near Birney could have an annual post-mining dissolved-solids load of 3,415 tons at median discharge, a 47% increase from pre-mining conditions load. Post-mining concentrations of dissolved solids, at median discharge, could range from 2,380 mg/L in March to 3,940 mg/L in August, compared to mean pre-mining concentrations that ranged from 1,700 mg/L in July, November, and December to 2,060 mg/L in May. Post-mining concentrations and loads in Hanging Woman Creek would be smaller if a smaller area were mined. (USGS)

  14. Recent developments in the reclamation of surface mined lands

    Science.gov (United States)

    Sharma, K.D.; Gough, L.P.; Kumar, S.; Sharma, B.K.; Saxena, S.K.

    1997-01-01

    A broad review of mine land reclamation problems and challenges in arid lands is presented with special emphasis on work recently completed in India. The economics of mining in the Indian Desert is second only to agriculture in importance. Lands disturbed by mining, however, have only recently been the focus of reclamation attempts. Studies were made and results compiled of problems associated with germplasm selection, soil, plant and overburden characterization and manipulation, plant establishment methods utilized, soil amendment needs, use and conservation of available water and the evaluation of ecosystem sustainability. Emphasis is made of the need for multi-disciplinary approaches to mine land reclamation research and for the long-term monitoring of reclamation success.

  15. Effect of high-extraction coal mining on surface and ground waters

    International Nuclear Information System (INIS)

    Kendorski, F.S.

    1993-01-01

    Since first quantified around 1979, much new data have become available. In examining the sources of data and the methods and intents of the researchers of over 65 case histories, it became apparent that the strata behaviors were being confused with overlapping vertical extents reported for the fractured zones and aquiclude zones depending on whether the researcher was interested in water intrusion into the mine or in water loss from surface or ground waters. These more recent data, and critical examination of existing data, have led to the realization that the former Aquiclude Zone defined for its ability to prevent or minimize the intrusion of ground or surface waters into mines has another important character in increasing storage of surface and shallow ground waters in response to mining with no permanent loss of waters. This zone is here named the Dilated Zone. Surface and ground waters can drain into this zone, but seldom into the mine, and can eventually be recovered through closing of dilations by mine subsidence progression away from the area, or filling of the additional void space created, or both. A revised model has been developed which accommodates the available data, by modifying the zones as follows: collapse and disaggregation extending 6 to 10 times the mined thickness above the panel; continuous fracturing extending approximately 24 times the mined thickness above the panel, allowing temporary drainage of intersected surface and ground waters; development of a zone of dilated, increased storativity, and leaky strata with little enhanced vertical permeability from 24 to 60 times the mined thickness above the panel above the continuous fracturing zone, and below the constrained or surface effects zones; maintenance of a constrained but leaky zone above the dilated zone and below the surface effects zone; and limited surface fracturing in areas of extension extending up to 50 ft or so beneath the ground surface. 119 ref., 5 figs., 2 tabs

  16. Surface Mining and Reclamation Effects on Flood Response of Watersheds in the Central Appalachian Plateau Region

    Science.gov (United States)

    Ferrari, J. R.; Lookingbill, T. R.; McCormick, B.; Townsend, P. A.; Eshleman, K. N.

    2009-01-01

    Surface mining of coal and subsequent reclamation represent the dominant land use change in the central Appalachian Plateau (CAP) region of the United States. Hydrologic impacts of surface mining have been studied at the plot scale, but effects at broader scales have not been explored adequately. Broad-scale classification of reclaimed sites is difficult because standing vegetation makes them nearly indistinguishable from alternate land uses. We used a land cover data set that accurately maps surface mines for a 187-km2 watershed within the CAP. These land cover data, as well as plot-level data from within the watershed, are used with HSPF (Hydrologic Simulation Program-Fortran) to estimate changes in flood response as a function of increased mining. Results show that the rate at which flood magnitude increases due to increased mining is linear, with greater rates observed for less frequent return intervals. These findings indicate that mine reclamation leaves the landscape in a condition more similar to urban areas rather than does simple deforestation, and call into question the effectiveness of reclamation in terms of returning mined areas to the hydrological state that existed before mining.

  17. Analysis of Nature of Science Included in Recent Popular Writing Using Text Mining Techniques

    Science.gov (United States)

    Jiang, Feng; McComas, William F.

    2014-09-01

    This study examined the inclusion of nature of science (NOS) in popular science writing to determine whether it could serve supplementary resource for teaching NOS and to evaluate the accuracy of text mining and classification as a viable research tool in science education research. Four groups of documents published from 2001 to 2010 were analyzed: Scientific American, Discover magazine, winners of the Royal Society Winton Prize for Science Books, and books from NSTA's list of Outstanding Science Trade Books. Computer analysis categorized passages in the selected documents based on their inclusions of NOS. Human analysis assessed the frequency, context, coverage, and accuracy of the inclusions of NOS within computer identified NOS passages. NOS was rarely addressed in selected document sets but somewhat more frequently addressed in the letters section of the two magazines. This result suggests that readers seem interested in the discussion of NOS-related themes. In the popular science books analyzed, NOS presentations were found more likely to be aggregated in the beginning and the end of the book, rather than scattered throughout. The most commonly addressed NOS elements in the analyzed documents are science and society and empiricism in science. Only one inaccurate presentation of NOS were identified in all analyzed documents. The text mining technique demonstrated exciting performance, which invites more applications of the technique to analyze other aspects of science textbooks, popular science writing, or other materials involved in science teaching and learning.

  18. NEWS RELEASE - Agencies Agree to Joint Regulatory Framework for Processing Applications for Surface Coal Mining Operations

    Science.gov (United States)

    News release from February 10, 2005 announcing a memorandum of understanding (MOU) that offers a joint framework to improve permit application procedures for surface coal mining operations that place dredged or fill material in waters of the United States.

  19. Prime farmland disturbance from coal surface mining in the corn belt, 1980-2000

    Energy Technology Data Exchange (ETDEWEB)

    Bernard, D.P.

    1979-09-01

    The five midwestern states that make up the Corn Belt farm production region - Illinois, Indiana, Iowa, Missouri, and Ohio - contain about 110 billion tons of coal reserves (19% of which are surface mineable) and 110 million acres of arable land (69% of which are prime farmlands). In 1975, this region was the site of 21% of the nation's total coal production and 50% of the nation's corn and soybean harvest. Because corn and soybeans are key elements in US foreign trade and because nearly two-thirds of the regional coal production is from surface coal mines, it is important to understand the potential conflicts that may arise between the coal and agricultural industries in the Corn Belt. This report presents background data on the coal and agricultural industries in the Corn Belt states, along with the results of a quantitative analysis of the potential disruption of land and associated prime farmland due to future coal surface mining activity in the region. Estimates of potential land dusruptions indicate that 452,000 acres of land, including 127,000 acres of prime farmland, could be disturbed in the period 1980-2000. Additionally, the data indicate that certain counties in the Corn Belt states may experience impacts significantly greater than the regional average would suggest.

  20. Rehabilitation materials from surface- coal mines in western U.S.A. III. Relations between elements in mine soil and uptake by plants.

    Science.gov (United States)

    Severson, R.C.; Gough, L.P.

    1984-01-01

    Plant uptake of Cd, Co, Cu, Fe, Mn, Ni, Pb and Zn from mine soils was assessed using alfalfa Medicago sativa, sainfoin Onobrychis viciaefolia, smooth brome Bromus inermis, crested wheatgrass Agropyron cristatum, slender wheatgrass A. trachycaulum and intermediate wheatgrass A. intermedium; mine soil (cover-soil and spoil material) samples were collected from rehabilitated areas of 11 western US surface-coal mines in North Dakota, Montana, Wyoming and Colorado. Correlations between metals in plants and DTPA-extractable metals from mine soils were generally not statistically significant and showed no consistent patterns for a single metal or for a single plant species. Metal uptake by plants, relative to amounts in DTPA extracts of mine soil, was positively related to mine soil organic matter content or negatively related to mine soil pH. DTPA-extractable metal levels were significantly correlated with mine soil pH and organic-matter content.-from Authors

  1. Hydrology and geochemistry of a surface coal mine in northwestern Colorado

    Science.gov (United States)

    Williams, R.S.; Clark, G.M.

    1994-01-01

    The hydrology and geochemistry of a reclaimed coal mine in northwestern Colorado were monitored during water years 1988 and 1989. Some data also were collected in water years 1987 and 1990. This report describes (1) the sources of hydrologic recharge to and discharge from reclaimed spoil, (2) the relative contributions of recharge to the reclaimed spoil aquifer from identified source waters and the rate of water movement from those sources to the reclaimed spoil, and (3) the geochemical reactions that control water quality in reclaimed spoil. The study area was at a dip-slope coal mine encompassing about 7 square miles with land slopes of varying aspect. The area was instrumented and monitored at five sites; two sites had unmined and reclaimed- spoil areas adjacent to each other and three sites were unmined. The mined areas had been reclaimed. Instrumentation at the study sites included 1 climate station, 3 rain gages, 19 soil-water access tubes, 2 lysimeters, 18 wells completed in bedrock, 7 wells completed in reclaimed spoil, and 2 surface- water gaging stations. The results of the study indicate that the reclaimed spoil is recharged from surface recharge and underburden aquifers. Discharge, as measured by lysimeters, was about 3 inches per year and occurred during and after snowmelt. Hydraulic-head measurements indicated a potential for ground-water movement from deeper to shallower aquifers. Water levels rose in the reclaimed-spoil aquifer and spring discharge at the toe of the spoil slopes increased rapidly in response to snowmelt. Water chemistry, stable isotopes, geochemical models, and mass-balance calculations indicate that surface recharge and the underburden aquifers each contribute about 50 percent of the water to the reclaimed-spoil aquifers. Geochemical information indicates that pyrite oxidation and dissolution of carbonate and efflorescent sulfate minerals control the water chemistry of the reclaimed-spoil aquifer.

  2. 78 FR 63463 - Intent To Prepare a Regional Environmental Impact Statement for Surface Coal and Lignite Mining...

    Science.gov (United States)

    2013-10-24

    ... Environmental Impact Statement for Surface Coal and Lignite Mining in the State of Texas AGENCY: Department of... responsibility. These coal and lignite mining activities may eventually require authorization from the USACE... by mail. Surface coal and lignite mining projects in the USACE Fort Worth's area of responsibility...

  3. 75 FR 18500 - Guidance on Improving EPA Review of Appalachian Surface Coal Mining Operations under the Clean...

    Science.gov (United States)

    2010-04-12

    ... in terms of mine design, site and materials management, or water treatment systems, consistent with... of Appalachian Surface Coal Mining Operations under the Clean Water Act, National Environmental... Appalachian Surface Coal Mining Operations under the Clean Water Act, National Environmental Policy Act, and...

  4. Development of a tree classifier for discrimination of surface mine activity from Landsat digital data

    Science.gov (United States)

    Solomon, J. L.; Miller, W. F.; Quattrochi, D. A.

    1979-01-01

    In a cooperative project with the Geological Survey of Alabama, the Mississippi State Remote Sensing Applications Program has developed a single purpose, decision-tree classifier using band-ratioing techniques to discriminate various stages of surface mining activity. The tree classifier has four levels and employs only two channels in classification at each level. An accurate computation of the amount of disturbed land resulting from the mining activity can be made as a product of the classification output. The utilization of Landsat data provides a cost-efficient, rapid, and accurate means of monitoring surface mining activities.

  5. Potential energy surface for ? dissociation including spin-orbit effects

    Science.gov (United States)

    Siebert, Matthew R.; Aquino, Adelia J. A.; de Jong, Wibe A.; Granucci, Giovanni; Hase, William L.

    2012-10-01

    Previous experiments [J. Phys. Chem. A 116, 2833 (2012)] have studied the dissociation of 1,2-diiodoethane radical cation ( ? ) and found a one-dimensional distribution of translational energy, an odd finding considering most product relative translational energy distributions are two-dimensional. The goal of this study is to obtain an accurate understanding of the potential energy surface (PES) topology for the unimolecular decomposition reaction ? → C2H4I+ + I•. This is done through comparison of many single-reference electronic structure methods, coupled-cluster single-point (energy) calculations, and multi-reference energy calculations used to quantify spin-orbit (SO) coupling effects. We find that the structure of the ? reactant has a substantial effect on the role of the SO coupling on the reaction energy. Both the BHandH and MP2 theories with an ECP/6-31++G** basis set, and without SO coupling corrections, provide accurate models for the reaction energetics. MP2 theory gives an unsymmetric structure with different C-I bond lengths, resulting in a SO energy for ? similar to that for the product I-atom and a negligible SO correction to the reaction energy. In contrast, DFT gives a symmetric structure for ? , similar to that of the neutral C2H4I2 parent, resulting in a substantial SO correction and increasing the reaction energy by 6.0-6.5 kcalmol-1. Also, we find that, for this system, coupled-cluster single-point energy calculations are inaccurate, since a small change in geometry can lead to a large change in energy.

  6. Thirteen-year hardwood tree performance on a Midwest surface mine

    International Nuclear Information System (INIS)

    Ashby, W.C.; Kolar, C.A.

    1998-01-01

    Black walnut (Juglans nigra L.), sweetgum (Liquidambar styraciflua L.), tuliptree (Liriodendron tulipifera L.), white oak (Quercus alba L.), bur oak (Q. macrocarpa Michx.), and pin oak (Q. palustris Muenchh.) seedlings were planted both fall 1980 and spring 1981 on mixed overburden strip-mining banks (ungraded), mixed overburden graded to approximate original contour (AOC) (graded), mixed overburden graded to AOC wit h 60 cm of replaced pre-mining surface soil materials (topsoil), and on old fields near the strip-mine (unmined). Black walnut and pin oak were also planted as seed, with a total of 6000 seedlings/seed spots in the study. Initial species field viability ranged from 86 to 100%. With one exception, after 3 growing seasons oak seedlings had 50% or greater survival. Survival was mostly lower after 3 years with some additional mortality by years 8 and 13. Height and diameter breast height were measured after 13 years. Survival and growth of trees planted fall or spring was similar overall with variable performance by species. Seedlings of several species on the ungraded site had over 50% survival after 13 years, with fewer trees where planted as seed. Mean height of all species combined was significantly greater on the ungraded than on any other site and was lowest on the topsoil site. The unmined sites had high variability in species survival and height. Better reclamation with trees resulted from a deep, well-drained rooting medium with minimal compaction and a mineral-rich surface soil including coarse fragments over 2 mm in size for long-term productivity

  7. Thirteen-year hardwood tree performance on a Midwest surface mine

    Energy Technology Data Exchange (ETDEWEB)

    Ashby, W.C.; Kolar, C.A. [Southern Illinois Univ., Carbondale, IL (United States). Dept. of Plant Biology

    1998-12-31

    Black walnut (Juglans nigra L.), sweetgum (Liquidambar styraciflua L.), tuliptree (Liriodendron tulipifera L.), white oak (Quercus alba L.), bur oak (Q. macrocarpa Michx.), and pin oak (Q. palustris Muenchh.) seedlings were planted both fall 1980 and spring 1981 on mixed overburden strip-mining banks (ungraded), mixed overburden graded to approximate original contour (AOC) (graded), mixed overburden graded to AOC wit h 60 cm of replaced pre-mining surface soil materials (topsoil), and on old fields near the strip-mine (unmined). Black walnut and pin oak were also planted as seed, with a total of 6000 seedlings/seed spots in the study. Initial species field viability ranged from 86 to 100%. With one exception, after 3 growing seasons oak seedlings had 50% or greater survival. Survival was mostly lower after 3 years with some additional mortality by years 8 and 13. Height and diameter breast height were measured after 13 years. Survival and growth of trees planted fall or spring was similar overall with variable performance by species. Seedlings of several species on the ungraded site had over 50% survival after 13 years, with fewer trees where planted as seed. Mean height of all species combined was significantly greater on the ungraded than on any other site and was lowest on the topsoil site. The unmined sites had high variability in species survival and height. Better reclamation with trees resulted from a deep, well-drained rooting medium with minimal compaction and a mineral-rich surface soil including coarse fragments over 2 mm in size for long-term productivity.

  8. Assessment of mercury erosion by surface water in Wanshan mercury mining area.

    Science.gov (United States)

    Dai, ZhiHui; Feng, Xinbin; Zhang, Chao; Shang, Lihai; Qiu, Guangle

    2013-08-01

    Soil erosion is a main cause of land degradation, and in its accelerated form is also one of the most serious ecological environmental problems. Moreover, there are few studies on migration of mercury (Hg) induced by soil erosion in seriously Hg-polluted districts. This paper selected Wanshan Hg mining area, SW China as the study area. Revised universal soil loss equation (RUSLE) and Geographic information system (GIS) methods were applied to calculate soil and Hg erosion and to classify soil erosion intensity. Our results show that the soil erosion rate can reach up to 600,884tkm(-2)yr(-1). Surfaces associated with very slight and extremely severe erosion include 76.6% of the entire land in Wanshan. Furthermore, the cumulative erosion rates in the area impacted by extremely severe erosion make up 90.5% of the total. On an annual basis, Hg surface erosion load was predicted to be 505kgyr(-1) and the corresponding mean migration flux of Hg was estimated to be 3.02kgkm(-2)yr(-1). The erosion loads of Hg resulting from farmland and meadow soil were 175 and 319kgyr(-1) respectively, which were enhanced compared to other landscape types due to the fact that they are generally located in the steep zones associated with significant reclamation. Contributing to establish a mass balance of Hg in Wanshan Hg mining area, this study supplies a dependable scientific basis for controlling soil and water erosion in the local ecosystems. Land use change is the most effective way for reducing Hg erosion load in Wanshan mining area. Copyright © 2013 Elsevier Inc. All rights reserved.

  9. Role of mycorrhizae in forestation of surface mines

    Science.gov (United States)

    Donald H. Marx

    1980-01-01

    A brief introduction to ecto- and endomycorrhizae and their importance to plants is presented. Recent findings confirm the significance of ectomycorrhizae, particularly those formed by Pisolithus tinctorius in nurseries, to survival and growth of pine seedlings on strip-mined lands. Commercial inoculum of this fungus may be available in 1981. Recent...

  10. Mining

    Directory of Open Access Journals (Sweden)

    Khairullah Khan

    2014-09-01

    Full Text Available Opinion mining is an interesting area of research because of its applications in various fields. Collecting opinions of people about products and about social and political events and problems through the Web is becoming increasingly popular every day. The opinions of users are helpful for the public and for stakeholders when making certain decisions. Opinion mining is a way to retrieve information through search engines, Web blogs and social networks. Because of the huge number of reviews in the form of unstructured text, it is impossible to summarize the information manually. Accordingly, efficient computational methods are needed for mining and summarizing the reviews from corpuses and Web documents. This study presents a systematic literature survey regarding the computational techniques, models and algorithms for mining opinion components from unstructured reviews.

  11. Geology of uranium vein deposits (including Schwartzwalder Mine) in Proterozoic metamorphic rocks, Front Range, Colorado

    International Nuclear Information System (INIS)

    Voto, R.H. de; Paschis, J.A.

    1980-01-01

    The Schwartzwalder uranium deposit is one of many uranium vein occurrences in the Lower Proterozoic metamorphic rocks of the Front Range, Colorado. The principal veins of significant uranium content occur marginal to the Colorado Mineral Belt; are localized by structural dilation zones, vein junctions, fault deflections or branching; and occur dominantly within or at the contact of certain preferred metamorphic-stratigraphic units, particularly the siliceous, garnetiferous gneisses, where these rock units are broken by faults and fractures associated with the north-northwest-trending throughgoing faults. Uranium at the Schwartzwalder mine occurs primarily as open-space brecciated vein filling along the steeply west-dipping Illinois vein and numerous east-dipping subsidiary veins where they cut preferred metamorphic host rocks that are tightly folded. Uraninite occurs with molybdenite, adularia, jordisite, ankerite, pyrite, base-metal sulphides, and calcite in vein-filling paragenetic sequence. Minor wall-rock alteration is mainly hematite alteration and bleaching. Vertical relief on the developed ore deposit is 900 metres and still open-ended at depth. No vertical zonation of alteration, vein mineralogy, density of the subsidiary veins, or ore grade has been detected. The Schwartzwalder uranium deposit is of substantial tonnage (greater than 10,000 metric tons of U 3 O 8 ) and grade (averaging 0.57% U 3 O 8 ). Structural mapping shows that the Illinois vein-fault is a Proterozoic structure. Discordant Proterozoic (suggested) and Laramide dates have been obtained from Schwartzwalder ore. The data suggest, therefore, a Proterozoic ancestry of this heretofore presumed Laramide (Late Cretaceous-Early Tertiary) hydrothermal uranium deposit. The authors suggest a polygenetic model for the origin of the Schwartzwalder uranium deposit

  12. Selected problems of the influence of underground mining on ground surface

    Energy Technology Data Exchange (ETDEWEB)

    Gren, K.; Popiolek, E.; Janusz, W.; Bartosik-Sroka, T.; Ostrowski, J.

    1980-01-01

    Problems associated with forecasting ground deformation caused by underground mining are discussed. Irregularities in surface deformations are described. Two cases of irregularities which occur in the Lower Silesian coal basin are presented. In the Nowa Ruda coal mine, irregularities accompany mining of coal seams located at a depth of about 400 m using pneumatic stowing. Mining geological conditions of working fronts are discussed. The mined coal seams are located in the protective pillar under Nowa Ruda. Zone of increased deformation is characterized by horizontal deformations 2.5 times higher than the maximum average deformation. The second case is associated with coal mining in the safety coal pillar of Nowe Miasto (a section of the town of Walbrzych). Irregularities in ground deformations occur on the rise side of mined coal seams: compression deformations are two times higher than the maximum compression beyond the zone and the three times higher than the maximum tension deformations. Ground deformations and the irregularities are shown in four diagrams. It is suggested that the described cases of deformation irregularities point out the need for individual analysis of geological and mining conditions of coal seams. (9 refs.) (In Polish)

  13. Regional scale selenium loading associated with surface coal mining, Elk Valley, British Columbia, Canada.

    Science.gov (United States)

    Wellen, Christopher C; Shatilla, Nadine J; Carey, Sean K

    2015-11-01

    Selenium (Se) concentrations in surface water downstream of surface mining operations have been reported at levels in excess of water quality guidelines for the protection of wildlife. Previous research in surface mining environments has focused on downstream water quality impacts, yet little is known about the fundamental controls on Se loading. This study investigated the relationship between mining practices, stream flows and Se concentrations using a SPAtially Referenced Regression On Watershed attributes (SPARROW) model. This work is part of a R&D program examining the influence of surface coal mining on hydrological and water quality responses in the Elk Valley, British Columbia, Canada, aimed at informing effective management responses. Results indicate that waste rock volume, a product of mining activity, accounted for roughly 80% of the Se load from the Elk Valley, while background sources accounted for roughly 13%. Wet years were characterized by more than twice the Se load of dry years. A number of variables regarding placement of waste rock within the catchments, length of buried streams, and the construction of rock drains did not significantly influence the Se load. The age of the waste rock, the proportion of waste rock surface reclaimed, and the ratio of waste rock pile side area to top area all varied inversely with the Se load from watersheds containing waste rock. These results suggest operational practices that are likely to reduce the release of Se to surface waters. Copyright © 2015 Elsevier B.V. All rights reserved.

  14. Residence time of contaminants released in surface coal mines: A wind-tunnel study

    Energy Technology Data Exchange (ETDEWEB)

    Thompson, R.S.

    1993-08-01

    The 1990 Clean Air Act Amendments direct the U.S. Environmental Protection Agency to evaluate and modify, as required, existing dispersion models for the prediction of dispersion of dust from surface coal mines. The application of mathematical air pollution dispersion models to the dispersion of dust from surface coal mines requires knowledge of not only the amount of dust generated in the mine, but the fraction of that generated that actually escapes from the mine. The escape fraction can be related to the residence time that released material will remain, on average, within the mine. The concentration in the mine was found to follow an exponential decay function from which an exponential decay time constant (or residence time) was computed for each case. A semi-empirical formula was found that related the residence time to the mine geometry and wind direction quite well. This formula can be used to estimate escape fraction in determining the source strength for the application of mathematical dispersion models.

  15. On-Site Radon Detection of Mining-induced Fractures from Overlying Strata to the Surface: A Case Study of the Baoshan Coal Mine in China

    Directory of Open Access Journals (Sweden)

    Wei Zhang

    2014-12-01

    Full Text Available Large-scale longwall mining of shallow coal seams may cause mining-induced fractures that can project completely through to the surface. This could lead to a series of mine safety and environmental issues, further deteriorating the already fragile ecological environment in the Western mining areas in China. Therefore, an accurate and effective understanding of the spatiotemporal evolution law of mining-induced fractures in overlying strata and its relationship to upper aquifers is critical. In this paper, the application of the geophysical-chemical properties of radon in mining engineering is explored as a potential solution to the shortcomings of existing surveying methods. A radioactive measurement method is proposed for the detection of the development of mining-induced fractures from overlying strata to the surface in the Baoshan Coal Mine (BCM. The on-site test indicated that the first weighting step is approximately 60 m, the average periodic weighting step is approximately 20 m, and the influence coverage of the advanced abutment pressure is approximately 30 m. The presented method could be used as an indirect technical support to increase the safety of coal mining by acting as a simple, fast, and reliable method of detecting mining-induced fractures in overlying strata.

  16. Evaluation of gas emission from closed mines surface to atmosphere

    OpenAIRE

    Pokryszka, Zbigniew; Tauziède, Christian

    2000-01-01

    International audience; The closed mines are likely to release into atmosphere polluting or/and dangerous gases. The detection and hazard evaluation of those emissions are a complex problem. In order to quantify and qualify these gas emissions and check gas migrations special measuring methods are required. The research done at INERIS resulted in a reliable and appropriate methodology using a flux chamber. This methodology is intended for detecting, quantifying and qualifying gas discharges, ...

  17. Ensuring the Environmental and Industrial Safety in Solid Mineral Deposit Surface Mining

    Science.gov (United States)

    Trubetskoy, Kliment; Rylnikova, Marina; Esina, Ekaterina

    2017-11-01

    The growing environmental pressure of mineral deposit surface mining and severization of industrial safety requirements dictate the necessity of refining the regulatory framework governing safe and efficient development of underground resources. The applicable regulatory documentation governing the procedure of ore open-pit wall and bench stability design for the stage of pit reaching its final boundary was issued several decades ago. Over recent decades, mining and geomechanical conditions have changed significantly in surface mining operations, numerous new software packages and computer developments have appeared, opportunities of experimental methods of source data collection and processing, grounding of the permissible parameters of open pit walls have changed dramatically, and, thus, methods of risk assessment have been perfected [10-13]. IPKON RAS, with the support of the Federal Service for Environmental Supervision, assumed the role of the initiator of the project for the development of Federal norms and regulations of industrial safety "Rules for ensuring the stability of walls and benches of open pits, open-cast mines and spoil banks", which contribute to the improvement of economic efficiency and safety of mineral deposit surface mining and enhancement of the competitiveness of Russian mines at the international level that is very important in the current situation.

  18. 77 FR 26046 - Proposed Extension of Existing Information Collection; Ground Control for Surface Coal Mines and...

    Science.gov (United States)

    2012-05-02

    ... provided in the desired format, reporting burden (time and financial resources) is minimized, collection... Extension of Existing Information Collection; Ground Control for Surface Coal Mines and Surface Work Areas... Federal agencies with an opportunity to comment on proposed and continuing collections of information in...

  19. Chapter 4: Low compaction grading to enhance reforestation success on coal surface mines

    Science.gov (United States)

    R. Sweigard; J. Burger; C. Zipper; J. Skousen; C. Barton; P. Angel

    2017-01-01

    This Forest Reclamation Advisory describes final-grading techniques for reclaiming coal surface mines to forest postmining land uses. Final grading that leaves a loose soil and a rough surface increases survival of planted seedlings and forest productivity. Such practices are often less costly than traditional "smooth grading" while meeting the requirements...

  20. Feasibility of a continuous surface mining machine using impact breakers. Phase I report, 1 October 1979-31 March 1980

    Energy Technology Data Exchange (ETDEWEB)

    Fisk, A. T.; Simpson, R. J.

    1980-04-01

    This is the first phase report of the efforts to evaluate the feasibility of excavating coal and overburden from surface mines using impact breakers. Phase I is divided into four task groups. Those tasks are as follows: Selection of Field Sites for Parametric, Selection of Impact Hammers for Field, Design Test System, and Prepare Parametric Test Plan. A detailed description and accounting of each task is given in the body of this report. Included as appendices are the FMA internal reports on the individual mines visited. These reports are the basis of test site selection. The basic finding of this phase are that industry interest in the concept of impact mining tends toward the removal of multiple thin seams of coal and parting rather than deep coal or overburden and, while the intent of this contract is to explore the feasibility of impactors in a vertical array for use in a terraced mine plan, future design of a continuous mining machine should take industry acceptance into account.

  1. Deep Impact: Effects of Mountaintop Mining on Surface Topography, Bedrock Structure, and Downstream Waters.

    Science.gov (United States)

    Ross, Matthew R V; McGlynn, Brian L; Bernhardt, Emily S

    2016-02-16

    Land use impacts are commonly quantified and compared using 2D maps, limiting the scale of their reported impacts to surface area estimates. Yet, nearly all land use involves disturbances below the land surface. Incorporating this third dimension into our estimates of land use impact is especially important when examining the impacts of mining. Mountaintop mining is the most common form of coal mining in the Central Appalachian ecoregion. Previous estimates suggest that active, reclaimed, or abandoned mountaintop mines cover ∼7% of Central Appalachia. While this is double the areal extent of development in the ecoregion (estimated to occupy impacts are far more extensive than areal estimates alone can convey as the impacts of mines extend 10s to 100s of meters below the current land surface. Here, we provide the first estimates for the total volumetric and topographic disturbance associated with mining in an 11 500 km(2) region of southern West Virginia. We find that the cutting of ridges and filling of valleys has lowered the median slope of mined landscapes in the region by nearly 10 degrees while increasing their average elevation by 3 m as a result of expansive valley filling. We estimate that in southern West Virginia, more than 6.4km(3) of bedrock has been broken apart and deposited into 1544 headwater valley fills. We used NPDES monitoring datatsets available for 91 of these valley fills to explore whether fill characteristics could explain variation in the pH or selenium concentrations reported for streams draining these fills. We found that the volume of overburden in individual valley fills correlates with stream pH and selenium concentration, and suggest that a three-dimensional assessment of mountaintop mining impacts is necessary to predict both the severity and the longevity of the resulting environmental impacts.

  2. Longwall mining and surface deformation – lessons learned from dInSAR measurements

    CSIR Research Space (South Africa)

    Engelbrecht, Jeanine

    2016-08-01

    Full Text Available including 1) subsidence related to mining and groundwater abstraction, 2) deformation following earthquake events, 3) monitoring of landslides and slope stability, 4) monitoring the stability of infrastructure and large engineering works, and 5) monitoring...

  3. 75 FR 73995 - Lowering Miners' Exposure to Respirable Coal Mine Dust, Including Continuous Personal Dust Monitors

    Science.gov (United States)

    2010-11-30

    ... Health Administration, Labor. ACTION: Proposed rule; rescheduling of public hearings; correction. SUMMARY... also corrects one error in the preamble to the proposed rule. On November 15, 2010, MSHA published the... from any interested party, including those not presenting oral statements. Comments must be received by...

  4. 76 FR 12648 - Lowering Miners' Exposure to Respirable Coal Mine Dust, Including Continuous Personal Dust Monitors

    Science.gov (United States)

    2011-03-08

    ... suggested alternative timeframes, particularly in light of the CPDM's limited memory capacity of about 20... concentrations that exceed proposed standards. For example, the proposed plan would include pre-operational examination, testing and set-up procedures to verify the operational readiness of the CPDM before each shift...

  5. Uranium in Surface Waters and Sediments Affected by Historical Mining in the Denver West 1:100,000 Quadrangle, Colorado

    Science.gov (United States)

    Zielinski, Robert A.; Otton, James K.; Schumann, R. Randall; Wirt, Laurie

    2008-01-01

    Geochemical sampling of 82 stream waters and 87 stream sediments within mountainous areas immediately west of Denver, Colorado, was conducted by the U.S. Geological Survey in October 1994. The primary purpose was to evaluate regionally the effects of geology and past mining on the concentration and distribution of uranium. The study area contains uranium- and thorium-rich bedrock, numerous noneconomic occurrences of uranium minerals, and several uranium deposits of variable size and production history. During the sampling period, local streams had low discharge and were more susceptible to uranium-bearing acid drainage originating from historical mines of base- and precious-metal sulfides. Results indicated that the spatial distribution of Precambrian granites and metamorphic rocks strongly influences the concentration of uranium in stream sediments. Within-stream transport increases the dispersion of uranium- and thorium rich mineral grains derived primarily from granitic source rocks. Dissolved uranium occurs predominantly as uranyl carbonate complexes, and concentrations ranged from less than 1 to 65 micrograms per liter. Most values were less than 5 micrograms per liter, which is less than the current drinking water standard of 30 micrograms per liter and much less than locally applied aquatic-life toxicity standards of several hundred micrograms per liter. In local streams that are affected by uranium-bearing acid mine drainage, dissolved uranium is moderated by dilution and sorptive uptake by stream sediments. Sorbents include mineral alteration products and chemical precipitates of iron- and aluminum-oxyhydroxides, which form where acid drainage enters streams and is neutralized. Suspended uranium is relatively abundant in some stream segments affected by nearby acid drainage, which likely represents mobilization of these chemical precipitates. The 234U/238U activity ratio of acid drainage (0.95-1.0) is distinct from that of local surface waters (more than 1

  6. Disposing of coal combustion residues in inactive surface mines: Effects on water quality

    International Nuclear Information System (INIS)

    Kim, A.G.; Ackman, T.E.

    1994-01-01

    The disposal of coal combustion residues (CCR) in surface and underground coal mines can provide a stable, low-maintenance alternative to landfills, benefiting the mining and electric power industries. The material may be able to improve water quality at acid generating abandoned or reclaimed coal mine sites. Most combustion residues are alkaline, and their addition to the subsurface environment could raise the pH, limiting the propagation of pyrite oxidizing bacteria and reducing the rate of acid generation. Many of these CCR are also pozzolanic, capable of forming cementitious grouts. Grouts injected into the buried spoil may decrease its permeability and porosity, diverting water away from the pyritic material. Both mechanisms, alkaline addition and water diversion, are capable of reducing the amount of acid produced at the disposal site. The US Bureau of Mines is cooperating in a test of subsurface injection of CCR into a reclaimed surface mine. Initially, a mixture of fly ash, lime, and acid mine drainage (AMD) sludge was injected. Lime was the source of calcium for the formation of the pozzolanic grout. Changes in water quality parameters (pH, acidity, anions, and trace metals) in water samples from wells and seeps indicate a small but significant improvement after CCR injection. Changes in the concentration of heavy metals in the water flowing across the site were apparently influenced by the presence of flyash

  7. Surface structural damage associated with longwall mining near Tuscaloosa, Alabama: a case history

    International Nuclear Information System (INIS)

    Isphording, W.C.

    1992-01-01

    Initially the paper examines the frequency of coal mine subsidence and the influence on surface subsidence of subsurface mining methods, i.e. room and pillar and longwall mining. A case study of the subsidence damage caused to a log house near Tuscaloosa, Alabama (USA), when a longwall panel passed beneath it is presented. The damage resulted in the homeowners suing the mining company for negligence. The article discusses information provided to the plaintiffs attorneys by the author. Aspects covered are: the subsidence and damage to the property; prediction of subsidence; the monitoring of subsidence; and the prevention of subsidence. An out-of-court settlement was agreed by the two parties. 15 refs., 5 figs

  8. Autumn olive (Elaeagnus umbellata) presence and proliferation on former surface coal mines in Eastern USA

    Science.gov (United States)

    Oliphant, Adam J.; Wynne, R.H.; Zipper, Carl E.; Ford, W. Mark; Donovan, P. F.; Li, Jing

    2017-01-01

    Invasive plants threaten native plant communities. Surface coal mines in the Appalachian Mountains are among the most disturbed landscapes in North America, but information about land cover characteristics of Appalachian mined lands is lacking. The invasive shrub autumn olive (Elaeagnus umbellata) occurs on these sites and interferes with ecosystem recovery by outcompeting native trees, thus inhibiting re-establishment of the native woody-plant community. We analyzed Landsat 8 satellite imagery to describe autumn olive’s distribution on post-mined lands in southwestern Virginia within the Appalachian coalfield. Eight images from April 2013 through January 2015 served as input data. Calibration and validation data obtained from high-resolution aerial imagery were used to develop a land cover classification model that identified areas where autumn olive was a primary component of land cover. Results indicate that autumn olive cover was sufficiently dense to enable detection on approximately 12.6 % of post-mined lands within the study area. The classified map had user’s and producer’s accuracies of 85.3 and 78.6 %, respectively, for the autumn olive coverage class. Overall accuracy was assessed in reference to an independent validation dataset at 96.8 %. Autumn olive was detected more frequently on mines disturbed prior to 2003, the last year of known plantings, than on lands disturbed by more recent mining. These results indicate that autumn olive growing on reclaimed coal mines in Virginia and elsewhere in eastern USA can be mapped using Landsat 8 Operational Land Imager imagery; and that autumn olive occurrence is a significant landscape vegetation feature on former surface coal mines in the southwestern Virginia segment of the Appalachian coalfield.

  9. [Data-mining characteristics of adverse drug reactions and pharmacovi-gilance of Chinese patent drugs including Aconitum herbs].

    Science.gov (United States)

    Zhang, Xiao-Meng; Li, Fan; Zhang, Bing; Chen, Xiao-Fen; Piao, Jing-Zhu

    2018-01-01

    The common Aconitum herbs in clinical application mainly include Aconiti Radix(Chuanwu), Aconiti Kusnezoffii Radix(Caowu) and Aconiti Lateralis Radix Praeparaia(Fuzi), all of which have toxicity. Therefore, the safety of using Chinese patent drugs including Aconitum herbs has become an hot topic in clinical controversy. Based on the data-mining methods, this study explored the characteristics and causes of adverse drug reactions/events (ADR/ADE) of the Chinese patent drugs including Aconitum, in order to provide pharmacovigilance and rational drug use suggestions for clinical application. The detailed ADR/ADE reports about the Chinese patent drugs including Aconitum herbs were retrieved in the domestic literature databases since 1984 to now. The information extraction and data-mining were conducted based on the platforms of Microsoft office Excel 2016, Clementine 12.0 and Cytoscape 3.3.0. Finally, 78 detailed ADR/ADE reports involving a total of 30 varieties were included. 92.31% ADR/ADE were surely or likely led by the Chinese patent drugs including Aconitum, mostly involving multiple system/organ damages with good prognosis, and even 1 case of death. The incidence of included ADRs/ADEs was associated with various factors such as the patient idiosyncratic, drug toxicity, as well as clinical medication. The patient age was most closely related to ADR/ADEs, and those aged from 60 to 69 were more easily suffered from the ADRs/ADEs of Chinese patent drugs including Aconitum. The probability of ADR/ADEs for the drugs including Chuanwu or Caowu was greater than that of Fuzi, and the using beyond the instructions dose was the most important potential safety hazard in the clinical medication process. For the regular and characteristics of ADR/ADEs led by Chinese patent drugs including Aconitum, special attention shall be paid to the elder patients or with the patients with allergies; strictly control the dosage and course of treatment, strengthen the safety medication

  10. 30 CFR 761.15 - Procedures for waiving the prohibition on surface coal mining operations within the buffer zone...

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Procedures for waiving the prohibition on surface coal mining operations within the buffer zone of an occupied dwelling. 761.15 Section 761.15... surface coal mining operations within the buffer zone of an occupied dwelling. (a) This section does not...

  11. Water-quality data for two surface coal mines reclaimed with alkaline waste or urban sewage sludge, Clarion County, Pennsylvania, May 1983 through November 1989

    Science.gov (United States)

    Dugas, D.L.; Cravotta, C.A.; Saad, D.A.

    1993-01-01

    Water-quality and other hydrologic data for two surface coal mines in Clarion County, Pa., were collected during 1983-89 as part of studies conducted by the U.S. Geological Survey in cooperation with the Pennsylvania Department of Environmental Resources. Water samples were collected from streams, seeps, monitor wells, and lysimeters on a monthly basis to evaluate changes in water quality resulting from the addition of alkaline waste or urban sewage sludge to the reclaimed mine-spoil surface. The mines are about 3.5 miles apart and were mined for bituminous coal of the upper and lower Clarion seams of the Allegheny Group of Pennsylvanian age. The coal had high sulfur (greater than 2 weight percent) concentrations. Acidic mine drainage is present at both mines. At one mine, about 8 years after mining was completed, large quantities (greater than 400 tons per acre) of alkaline waste consisting of limestone and lime-kiln flue dust were applied on two 2.5-acre plots within the 65-acre mine area. Water-quality data for the alkaline-addition plots and surrounding area were collected for 1 year before and 3 years after application of the alkaline additives (May 1983-July 1987). Data collected for the alkaline-addition study include ground-water level, surface-water discharge rate, temperature, specific conductance, pH, and concentrations of alkalinity, acidity, sulfate, iron (total and ferrous), manganese, aluminum, calcium, and magnesium. At the other mine, about 3.5 years after mining was completed, urban sewage sludge was applied over 60 acres within the 150-acre mine area. Waterquality data for the sludge-addition study were collected for 3.5 years after the application of the sludge (June 1986-December 1989). Data collected for the sludge-addition study include the above constituents plus dissolved oxygen, redox potential (Eh), and concentrations of dissolved solids, phosphorus, nitrogen species, sulfide, chloride, silica, sodium, potassium, cyanide, arsenic, barium

  12. 77 FR 62266 - Proposed Extension of Existing Information Collection; Daily Inspection of Surface Coal Mines...

    Science.gov (United States)

    2012-10-12

    ... collections of information in accordance with the Paperwork Reduction Act of 1995. This program helps to assure that requested data can be provided in the desired format, reporting burden (time and financial... Extension of Existing Information Collection; Daily Inspection of Surface Coal Mines; Certified Person...

  13. Baseline studies and evaluation of effects of surface discharge of deep-sea mining - INDEX area

    Digital Repository Service at National Institute of Oceanography (India)

    DeSousa, S.N.; Sardessai, S.

    . An evaluation of possible effects of surface discharge of mining fines - a slurry consisting of fine nodule fragments, bottom water and sediments - suggests that the discharge, with an expected solid content of 50 g/l, will induce increased primary production...

  14. Reforestation Efforts in Indiana Following the Surface Mining Control and Reclamation Act of 1977

    Science.gov (United States)

    Stephen D. Fillmore; John W. Groninger

    2004-01-01

    During the summer of 2002, data were collected from 22 post-Surface Mining Control and Reclamation Act sites in southwestern Indiana. Tree growth across these sites was generally poor, with site index values typically less than 40 feet (base age 50) for upland oaks. Robinina pseudoacacia (black locust) was observed to be the primary overstory tree...

  15. The design procedures on brick building against surface ground deformations due to mining and earthquake

    Energy Technology Data Exchange (ETDEWEB)

    Zhong, J.; Yang, S. (China University of Mining and Technology (China))

    1992-05-01

    By analysing the effects of ground motion and deformation on surface buildings, and drawing on the experience of damages caused by the Tangshan and Chenhai earthquakes, the authors discuss the design of brick and concrete buildings which are protected against the damaging effects of both earthquakes and mining activities. 5 figs.

  16. Blasting injuries in surface mining with emphasis on flyrock and blast area security

    Energy Technology Data Exchange (ETDEWEB)

    Bajpayee, T.S.; Rehak, T.R.; Mowrey, G.L.; Ingram, D.K. [NIOSH, Pittsburgh, PA (USA). Pittsburgh Research Lab.

    2004-07-01

    Blasting is a hazardous component of surface mining. Serious injuries and fatalities result from improper judgment or practice during rock blasting. This paper describes several fatal injury case studies, analyzes causative factors, and emphasizes preventive measures. During the 21-year period from 1978 to 1998, the mean yearly explosive-related injuries (fatal and nonfatal) for surface coal mines was 8.86 (95% CI: 6.38-11.33), and for surface metal/nonmetal mines 10.76 (95% CI: 8.39-13.14). Flyrock and lack of blast area security accounted for 68.2% of these injuries. Case studies indicate that the causative factors for fatal injuries are primarily personal and task-related and to some extent environmental. A reduction in the annual injuries in surface coal mines was observed during the 10-year period of 1989-1998 (5.80 (95% CI: 2.71-8.89)) compared to the previous 10-year period of 1979-1988 (10.90 (95% CI: 7.77-14.14)). However, such reduction was not noticed in the metal/nometal sector (i.e., 9.30 (95% CI: 6.84-11.76) for the period 1989-1998 compared with 11.00 (95% CI: 7.11-14.89) for the period 1979-1988). Discussion of case studies during safety meetings will help to mitigate fatal injuries and derive important payoffs in terms of lower risks and costs of injuries.

  17. Modeling forest ecosystem changes resulting from surface coal mining in West Virginia

    Science.gov (United States)

    John Brown; Andrew J. Lister; Mary Ann Fajvan; Bonnie Ruefenacht; Christine Mazzarella

    2012-01-01

    The objective of this project is to assess the effects of surface coal mining on forest ecosystem disturbance and restoration in the Coal River Subbasin in southern West Virginia. Our approach is to develop disturbance impact models for this subbasin that will serve as a case study for testing the feasibility of integrating currently available GIS data layers, remote...

  18. Characteristics of hazardous airborne dust around an Indian surface coal mining area.

    Science.gov (United States)

    Ghose, Mrinal K; Majee, S R

    2007-07-01

    Surface coal mining creates more air pollution problems with respect to dust than underground mining . An investigation was conducted to evaluate the characteristics of the airborne dust created by surface coal mining in the Jharia Coalfield. Work zone air quality monitoring was conducted at six locations, and ambient air quality monitoring was conducted at five locations, for a period of 1 year. Total suspended particulate matter (TSP) concentration was found to be as high as 3,723 microg/m(3), respirable particulate matter (PM10) 780 microg/m(3), and benzene soluble matter was up to 32% in TSP in work zone air. In ambient air, the average maximum level of TSP was 837 microg/m(3), PM10 170 microg/m(3) and benzene soluble matter was up to 30%. Particle size analysis of TSP revealed that they were more respirable in nature and the median diameter was around 20 microm. Work zone air was found to have higher levels of TSP, PM10 and benzene soluble materials than ambient air. Variations in weight percentages for different size particles are discussed on the basis of mining activities. Anionic concentration in TSP was also determined. This paper concludes that more stringent air quality standards should be adopted for coal mining areas and due consideration should be given on particle size distribution of the air-borne dust while designing control equipment.

  19. Contamination in surface waters around uranium mines in the Guadiana Basin

    Energy Technology Data Exchange (ETDEWEB)

    Bejarano, J.D.; Tome, F.V.; Sanchez, A.M.; Sanchez, A.R.

    1988-01-01

    In a study of the contamination by uranium mines in the River Guadiana basin, we have found the natural higher concentration of uranium in samples collected near the mines and the expected decrease with distance in samples farther away. In spite of this expected result, there is another interesting fact: a natural isotopic separation is observed. Measurements were by alpha spectrometry with a silicon surface barrier detector. The study was completed with total gamma activity at the same sites as for alphas, using an Nal(Tl) detector. (author).

  20. Sampling and sample handling procedures for priority pollutants in surface coal mining wastewaters. [Detailed list to be analyzed for

    Energy Technology Data Exchange (ETDEWEB)

    Hayden, R. S.; Johnson, D. O.; Henricks, J. D.

    1979-03-01

    The report describes the procedures used by Argonne National Laboratory to sample surface coal mine effluents in order to obtain field and laboratory data on 110 organic compounds or classes of compounds and 14 metals and minerals that are known as priority pollutants, plus 5-day biochemical oxygen demand (BOD/sub 5/), total organic carbon (TOC), chemical oxygen demand (COD), total dissolved solids (TDS), and total suspended solids (TSS). Included are directions for preparation of sampling containers and equipment, methods of sampling and sample preservation, and field and laboratory protocols, including chain-of-custody procedures. Actual analytical procedures are not described, but their sources are referenced.

  1. Memorandum of Understanding on Surface Coal Mining Operations Resulting in Placement of Excess Spoil Fills in the Waters of the United States

    Science.gov (United States)

    MOU on Surface Coal Mining Operations establishes a process for improving coordination in the review of permit applications required for surface coal mining and reclamation in waters of the United States

  2. Coal and Open-pit surface mining impacts on American Lands (COAL)

    Science.gov (United States)

    Brown, T. A.; McGibbney, L. J.

    2017-12-01

    Mining is known to cause environmental degradation, but software tools to identify its impacts are lacking. However, remote sensing, spectral reflectance, and geographic data are readily available, and high-performance cloud computing resources exist for scientific research. Coal and Open-pit surface mining impacts on American Lands (COAL) provides a suite of algorithms and documentation to leverage these data and resources to identify evidence of mining and correlate it with environmental impacts over time.COAL was originally developed as a 2016 - 2017 senior capstone collaboration between scientists at the NASA Jet Propulsion Laboratory (JPL) and computer science students at Oregon State University (OSU). The COAL team implemented a free and open-source software library called "pycoal" in the Python programming language which facilitated a case study of the effects of coal mining on water resources. Evidence of acid mine drainage associated with an open-pit coal mine in New Mexico was derived by correlating imaging spectrometer data from the JPL Airborne Visible/InfraRed Imaging Spectrometer - Next Generation (AVIRIS-NG), spectral reflectance data published by the USGS Spectroscopy Laboratory in the USGS Digital Spectral Library 06, and GIS hydrography data published by the USGS National Geospatial Program in The National Map. This case study indicated that the spectral and geospatial algorithms developed by COAL can be used successfully to analyze the environmental impacts of mining activities.Continued development of COAL has been promoted by a Startup allocation award of high-performance computing resources from the Extreme Science and Engineering Discovery Environment (XSEDE). These resources allow the team to undertake further benchmarking, evaluation, and experimentation using multiple XSEDE resources. The opportunity to use computational infrastructure of this caliber will further enable the development of a science gateway to continue foundational COAL

  3. Ergonomics - Using Ergonomics to Enhance Safe Production at a Surface Coal Mine - A Case Study with Powder Crews

    Energy Technology Data Exchange (ETDEWEB)

    Torma-Krajewski, J.; Wiehagen, W.; Etcheverry, A.; Turin, F.; Unger, R. [Colorado School of Mines, Golden, CO (United States)

    2009-07-01

    Job tasks that involve exposure to work-related musculoskeletal disorder (WMSD) risk factors may impact both the risk of injury and production downtime. Common WMSD risks factors associated with mining tasks include forceful exertions, awkward postures, repetitive motion, jolting and jarring, forceful gripping, contact stress, and whole body and segmental vibration. Mining environments that expose workers to temperature/humidity extremes, windy conditions, and slippery and uneven walking surfaces also contribute to injury risk. National Institute for Occupational Safety and Health (NIOSH) researchers worked with powder crew members from the Bridger Coal Company to identify and rank routine work tasks based on perceived exposure to WMSD risk factors. This article presents the process followed to identify tasks that workers believed involved the greatest exposure to risk factors and discusses risk reduction strategies. Specifically, the proposed prill truck design changes addressed cab ingress/egress, loading blast holes, and access to the upper deck of the prill truck.

  4. Weathering behavior of mine tailings and waste rock: A surface investigation

    International Nuclear Information System (INIS)

    Domvile, S.J.; Li, M.G.; Sollner, D.D.; Nesbitt, W.

    1994-01-01

    A study focusing on the ion movement in the near surface of sulfide minerals was conducted to better understand the weathering mechanisms of mine waste materials. Tailings and waste rock samples from Canadian mines were subjected to controlled weathering studies using various chemical leachants. Leachates were analyzed for various parameters, and petrographic analyses were conducted on the solid residues. Laboratory oxidation studies of pure pyrrhotite and arsenopyrite were carried out using the surface techniques X-ray photoelectron spectroscopy (XPS) and auger electron spectroscopy (AES). The data derived from the weathering study and the surface techniques were correlated to determine mechanisms of oxidation. Several results were observed during the project: ferric iron constitutes one third of the iron present in pyrrhotite, sulfide oxidation is initiated when rock is blasted, sulfide sulfur is oxidized to di- and poly-sulfides prior to forming sulfates, and significantly more sulfate is produced upon exposure to aqueous environments than to air alone

  5. Environmental impact of coal mining and coal seam gas production on surface water quality in the Sydney basin, Australia.

    Science.gov (United States)

    Ali, A; Strezov, V; Davies, P; Wright, I

    2017-08-01

    The extraction of coal and coal seam gas (CSG) will generate produced water that, if not adequately treated, will pollute surface and groundwater systems. In Australia, the discharge of produced water from coal mining and related activities is regulated by the state environment agency through a pollution licence. This licence sets the discharge limits for a range of analytes to protect the environment into which the produced water is discharged. This study reports on the impact of produced water from coal mine activities located within or discharging into high conservation environments, such as National Parks, in the outer region of Sydney, Australia. The water samples upstream and downstream from the discharge points from six mines were taken, and 110 parameters were tested. The results were assessed against a water quality index (WQI) which accounts for pH, turbidity, dissolved oxygen, biochemical oxygen demand, total dissolved solids, total phosphorus, nitrate nitrogen and E .coli. The water quality assessment based on the trace metal contents against various national maximum admissible concentration (MAC) and their corresponding environmental impacts was also included in the study which also established a base value of water quality for further study. The study revealed that impacted water downstream of the mine discharge points contained higher metal content than the upstream reference locations. In many cases, the downstream water was above the Australia and New Zealand Environment Conservation Council and international water quality guidelines for freshwater stream. The major outliers to the guidelines were aluminium (Al), iron (Fe), manganese (Mn), nickel (Ni) and zinc (Zn). The WQI of surface water at and downstream of the discharge point was lower when compared to upstream or reference conditions in the majority of cases. Toxicology indices of metals present in industrial discharges were used as an additional tool to assess water quality, and the newly

  6. Preferential flow characteristics of reclaimed mine soils in a surface coal mine dump.

    Science.gov (United States)

    Gang, Lv; Jun, Li; Yexin, Li; Ting, Wang; Yazhuo, Liu; Xinyang, Fu

    2017-06-01

    % of the total soil profile (0∼60 cm). Moreover, a Pearson correlation was used to analyze the relationship between environmental factors (soil, water, and plant factors) and the dye coverage ratio. The dye coverage ratio of soil preferential flow under different reclamation vegetations was very significantly or significantly positively correlated with the gravel content, mean radius of soil macropores, soil saturated hydraulic conductivity, root weight density, and root length density, which promoted the formation and development of soil preferential flow. This study will provide a scientific basis for understanding the formation mechanism and perfecting the research system of soil preferential flow, vegetation restoration, and reconstruction in a dump; furthermore, this research offers significance guidance in the construction of green mines and the development of regional economics.

  7. Intervention strategies to eliminate truck-related fatalities in surface coal mining in West Virginia.

    Science.gov (United States)

    Zhang, Meng; Kecojevic, Vladislav

    2016-01-01

    The main objective of this review was to build upon a previous study on the root causes of truck-related fatalities in surface coal mining operations in West Virginia, and to develop intervention strategies to eliminate these fatalities. This review considers a two-pronged approach to accident prevention: one that is fundamental and traditional (safety regulations, training and education, and engineering of the work environment); and one that is innovative and creative (e.g., applying technological advances to better control and eliminate the root causes of accidents). Suggestions for improving current training and education system are proposed, and recommendations are provided on improving the safety of mine working conditions, specifically safety conditions on haul roads, dump sites, and loading areas. We also discuss various currently available technologies that can help prevent haul truck-related fatal accidents. The results of this review should be used by mine personnel to help create safer working conditions and decrease truck-related fatalities in surface coal mining.

  8. Radiological impact of surface water and sediment near uranium mining sites.

    Science.gov (United States)

    Ivanova, K; Stojanovska, Z; Badulin, V; Kunovska, B; Yovcheva, M

    2015-12-01

    The aim of this study is to assess the radiological impact of surface water and sediment around uranium mining sites 20 years after their closing. The areas under observations are 31 former classical underground uranium mining and exploratory sites in Bulgaria, named as objects. The extraction and processing of uranium ores in the Republic of Bulgaria were ended in 1992. To assess the radiological impact of radionuclides field expeditions were performed to sample water and bottom sediment. The migration of uranium through surface water was examined as one of the major pathways for contamination spread. The range of uranium concentration in water flowing from the mining sites was from 0.012 to 6.8 mgU l(-1) with a geometric mean of 0.192 mgU l(-1). The uranium concentrations in water downstream the mining sites were approximately 3 times higher than the background value (upstream). The concentrations of Unat, (226)Ra, (210)Pb, and (232)Th in the sediment of downstream river were higher than those upstream by 3.4, 2.6, 2, and 1.7 times, respectively. The distribution coefficient of uranium reflects its high mobility in most of the sites. In order to evaluate the impact on people as well as site prioritization for more detailed assessment and water management, screening dose assessments were done.

  9. Effects of lignite surface mining on local communities: controversies and areas of negotiation

    Directory of Open Access Journals (Sweden)

    Badera Jarosław

    2017-09-01

    Full Text Available Selecting locations for lignite mining and power generation complexes has been the subject of intense controversy. As a result, there have been many conflicts in society due to environmental and economic concerns. This paper poses the question of how lignite surface mining affects local communities. These effects may be both negative and positive and some of them are intangible. It is very difficult to balance the pros and cons objectively as it depends on the assumed objectives and criteria of the analysis. Different social and economic structures in different communities, and various additional factors, are just some of the reasons why this balance may significantly differ around a country. The authors hold opposing views on the role of lignite in the energy mix and the balance of negative and positive effects that surface mining exerts on local communities. They agree, however, that the most important elements of the societal debate on lignite mining have not yet been adequately studied or presented in public discourse. The authors propose to introduce the procedure of Social Impact Assessment to the Polish legal system. This could be effective as a means to prevent many conflicts in the energy sector and be the best way to reach a compromise.

  10. Suitability of dredged material for reclamation of surface-mined land. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Harrison, W.; Van Luik, A.

    1979-12-01

    Eroding ridges of acidic coal-mine spoil in La Salle County, Illinois, were leveled to form a gently-sloped raised plateau. Four test plots were constructed: a control plot and three treatment plots that received a 0.9-m-thick cover of dredged material obtained from the Metropolitan Sanitary District of Greater Chicago. Two treatment plots received lime applications and all plots were seeded with a mixture of grasses. Pressure-vacuum soil water samplers were installed, in duplicate, at two levels in the control plot and at three levels in each treatment plot. The three levels in the treatment plots coincided with dredged material, the dredged-material mine-spoil interface, and the underlying mine spoil. Surface water, soil water, and groundwater were monitored for 29 water-quality parameters for one year. Rainfall, air temperature, runoff, and water-level elevation data were collected also. Detailed analysis of the data indicates that the dredged material used in this study does not adversely affect water quality; it supports abundant plant growth, lessens groundwater contamination, and controls acid runoff. The dredged material is judged to be a suitable material for use in reclamation of surface-mined land.

  11. Development of a new mathematical model for prediction of surface subsidence due to inclined coal-seam mining

    Energy Technology Data Exchange (ETDEWEB)

    Asadi, A.; Shahriar, K.; Goshtasbi, K.; Najm, K. [Islam Azad University, Tehran (Iran). Dept. of Mining Engineering

    2005-01-01

    Subsidence phenomenon as an unwanted consequence of underground mining can cause problems for environment and surface structures in mine area. Surface subsidence prediction for inclined and steep seams has been given less attention than horizontal seams due to the difficulties involved in the extraction of such coal-seams. This paper introduces a new profile function method for prediction of surface subsidence due to inclined coal-seam mining. The results of calculation with the new function indicate that the predicted value has good agreement with the measured data.

  12. Field and LiDAR observations of the Hector Mine California 1999 surface rupture

    Science.gov (United States)

    Sousa, F.; Akciz, S. O.; Harvey, J. C.; Hudnut, K. W.; Lynch, D. K.; Scharer, K. M.; Stock, J. M.; Witkosky, R.; Kendrick, K. J.; Wespestad, C.

    2014-12-01

    We report new field- and computer-based investigations of the surface rupture of the October 16, 1999 Hector Mine Earthquake. Since May 2012, in cooperation with the United States Marine Corps Air Ground Combat Center (MCAGCC) at Twentynine Palms, CA, our team has been allowed ground and aerial access to the entire surface rupture. We have focused our new field-based research and imagery analysis along the ~10 kilometer-long maximum slip zone (MSZ) which roughly corresponds to the zone of >4 meter dextral horizontal offset. New data include: 1) a 1 km wide aerial LiDAR survey along the entire surface rupture (@ 10 shots/m2, May 2012, www.opentopography.org); 2) terrestrial LiDAR surveys at 5 sites within the MSZ (@ >1000 shots/m2, April 2014); 3) low altitude aerial photography and ground based photography of the entire MSZ; 4) a ground-truthed database of 87 out of the 94 imagery-based offset measurements made within the MSZ; and 5) a database of 50 new field-based offset measurements made within the MSZ by our team on the ground, 31 of which have also been made on the computer (Ladicaoz) with both the 2000 LiDAR data (@ 0.5 m DEM resolution; Chen et al, in review) and 2012 LiDAR data (@ 35 cm DEM resolution; our team). New results to date include 1) significant variability (> 2 m) in horizontal offsets measured along short distances of the surface rupture (~100 m) within segments of the surface rupture that are localized to a single fault strand; 2) strong dependence of decadal scale fault scarp preservation on local lithology (bedrock vs. alluvial fan vs. fine sediment) and geomorphology (uphill vs. downhill facing scarp); 3) newly observed offset features which were never measured during the post-event field response; 4) newly observed offset features too small to be resolved in airborne LiDAR data (judged by our team to warrant removal from the database due to incorrect feature reconstruction; and 6) significant variability in both accuracy of LiDAR offset

  13. Localization of Surface or Near-surface Drifting Mines for Unmanned Systems in the Persian Gulf

    Science.gov (United States)

    2012-06-01

    many cases of interdiction mining, the minefields are covertly laid off enemy ports or assets. Once such a minefield is discovered , the port in...few days, and density-driven currents or thermohaline circulation varies over a period of weeks. The strong tidal currents create a bottom, mechanical

  14. Establishing Pine Monocultures and Mixed Pine-Hardwood Stands on Reclaimed Surface Mined Land in Eastern Kentucky: Implications for Forest Resilience in a Changing Climate

    Directory of Open Access Journals (Sweden)

    Geoffrey Bell

    2017-10-01

    Full Text Available Surface mining and mine reclamation practices have caused significant forest loss and forest fragmentation in Appalachia. Shortleaf pine (Pinus echinata is threatened by a variety of stresses, including diseases, pests, poor management, altered fire regimes, and climate change, and the species is the subject of a widescale restoration effort. Surface mines may present opportunity for shortleaf pine restoration; however, the survival and growth of shortleaf pine on these harsh sites has not been critically evaluated. This paper presents first-year survival and growth of native shortleaf pine planted on a reclaimed surface mine, compared to non-native loblolly pine (Pinus taeda, which has been highly successful in previous mined land reclamation plantings. Pine monoculture plots are also compared to pine-hardwood polyculture plots to evaluate effects of planting mix on tree growth and survival, as well as soil health. Initial survival of shortleaf pine is low (42%, but height growth is similar to that of loblolly pine. No differences in survival or growth were observed between monoculture and polyculture treatments. Additional surveys in coming years will address longer-term growth and survival patterns of these species, as well as changes to relevant soil health endpoints, such as soil carbon.

  15. Geomorphic evaluation of erosional stability at reclaimed surface mines in northwestern Colorado. Water Resources Investigation

    International Nuclear Information System (INIS)

    Elliott, J.G.

    1990-01-01

    The report identifies geomorphic, pedologic, vegetation, and hydrologic conditions that are associated with erosion of reclaimed surface-mined lands in northwestern Colorado. The report also presents methods for determining the appropriate values of geomorphic variables that can be manipulated during reclamation to increase erosional stability. A section on geomorphic principles associated with erosion of reclaimed land surfaces is designed for use as a primer by mine personnel and reclamation planners. The areas of interest in the study were those that were reclaimed under jurisdiction of current (1988) SMCRA reclamation regulations, yet were still affected by relatively rapid erosion rates several years after reclamation activities were completed. Geomorphic, pedologic, vegetation, and hydrologic data were collected onsite and from topographic maps. Data from reclaimed areas undergoing accelerated erosion were compared with data from reclaimed areas undergoing minimal erosion to identify conditions that controlled erosion on reclaimed surface-mined lands and to identify some postmining equilibrium landform characteristics. These data also were used to develop threshold relations

  16. Developments in the analysis of footwall slopes in surface coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Stead, D.; Eberhardt, E. [University of Saskatchewan, Saskatoon, SK (Canada). Dept. of Geological Sciences

    1997-03-01

    Surface mining of coal, particularly in areas of mountainous topography, often involves the formation of extensive footwall slopes parallel to the strata dip. Due to structural deformation steep dips on the limbs of folds may be encountered in association with thrust faults, jointing and residual shear strength conditions. Such an environment necessitates a rigorous assessment of footwall stability in order to ensure safe and economic exploitation of the coal. This paper provides a detailed review of the factors influencing footwall slope instability in surface coal mining and the major instability mechanisms. The analysis of footwalls in the design stage and the back analysis of footwall slope failures has in general been undertaken using predominantly two-dimensional limit equilibrium techniques often incorporating a simplistic elastic column analysis. The application of numerical modelling techniques to surface coal mine footwalls has received little attention. Here the authors illustrate the potential for investigating footwall failure mechanisms and stability using the distinct element method and other modelling techniques. 44 refs., 21 figs., 2 tabs.

  17. Factors affecting the development of a surface coal mine safety and training program in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Huber, D.W.; Gilliss, A.M.

    1982-09-01

    During the past decade, a general awareness of the need for and subsequent development of increased safety in United States coal mines has taken place. Government and industry alike were stimulated into accelerating their actions through unacceptable accident statistics and costs (in terms of human misery and dollar values). Those of us who work in the United States coal industry are aware of the development of governmental controls on mine safety. Both Federal and State regulations have placed increased responsibility upon mine owners and operators to insure a safe working environment and to provide training for miners. No other industrial group of workers has received such attention or, in our opinion, deserves it more. It should be pointed out that surface coal mines are safe places to work, considering the size of equipment, depths of excavation, use of high voltage electricity, explosives, and other hazards associated with continuous operations in all weather conditions. United States surface miners are, we believe, in a far safer environment while working at the mine than they are while driving to and from the mine, or performing a host of other non-mine related activities. While it is not the purpose of this paper to argue the effectiveness of governmental regulations, a brief review of the Federal control of mine safety will be made. Along with regulations, management expertise has also been developed. Since coal mining is an expensive, complex business, management sophistication has increased and with this enlightened viewpoint, all aspects of the business have been and are being analyzed. The impact management has on mine safety will also be discussed. Finally, and as the main function of this paper, we will describe management's use of principles and courses of action used to develop the safety function at a large volume surface lignite coal mine in the United States.

  18. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    International Nuclear Information System (INIS)

    Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

    2014-01-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin–Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  19. Nonlocal continuum-based modeling of breathing mode of nanowires including surface stress and surface inertia effects

    Science.gov (United States)

    Ghavanloo, Esmaeal; Fazelzadeh, S. Ahmad; Rafii-Tabar, Hashem

    2014-05-01

    Nonlocal and surface effects significantly influence the mechanical response of nanomaterials and nanostructures. In this work, the breathing mode of a circular nanowire is studied on the basis of the nonlocal continuum model. Both the surface elastic properties and surface inertia effect are included. Nanowires can be modeled as long cylindrical solid objects. The classical model is reformulated using the nonlocal differential constitutive relations of Eringen and Gurtin-Murdoch surface continuum elasticity formalism. A new frequency equation for the breathing mode of nanowires, including small scale effect, surface stress and surface inertia is presented by employing the Bessel functions. Numerical results are computed, and are compared to confirm the validity and accuracy of the proposed method. Furthermore, the model is used to elucidate the effect of nonlocal parameter, the surface stress, the surface inertia and the nanowire orientation on the breathing mode of several types of nanowires with size ranging from 0.5 to 4 nm. Our results reveal that the combined surface and small scale effects are significant for nanowires with diameter smaller than 4 nm.

  20. Emission factors for wind erosion of exposed aggregates at surface coal mines

    Energy Technology Data Exchange (ETDEWEB)

    Cowherd, C.

    1982-06-01

    The information presented in this paper is directed to those interested in inventorying dust emissions generated by wind erosion of exposed aggregates at surface coal mines. A testing program is described which entailed the use of a portable wind tunnel and an isokinetic sampling system to measure windblown dust emissions from coal and overburden materials at three western mine sites. Test measurements consisted of particle mass emission rates and size distributions for various control wind speeds and times after the initiation of wind erosion. The results indicate that natural surface crusts are very effective in mitigating suspended dust emissions and that a given surface has a finite potential for wind erosion subsequent to mechanical disturbance. Test data are used to develop a predictive emission factor equation which relates emission rate (per unit surface area) to the frequency of disturbance and the erosion potential corresponding to the fastest mile of wind for the period between disturbances. This equation can be used directly for flat surfaces or it can be coupled with an analysis of wind flow patterns around elevated storage piles to develop dust emission estimates for overall pile erosion.

  1. Nanocoating of titanium implant surfaces with organic molecules. Polysaccharides including glycosaminoglycans

    DEFF Research Database (Denmark)

    Gurzawska, Katarzyna Aleksandra; Svava, Rikke; Jørgensen, Niklas Rye

    2012-01-01

    Long-term stability of titanium implants are dependent on a variety of factors. Nanocoating with organic molecules is one of the method used to improve osseointegration. Nanoscale modification of titanium implants affects surface properties, such as hydrophilicity, biochemical bonding capacity...... with focus on polysaccharides including glycosaminoglycans, and how these molecules change surface properties, cell reactions and affect on osseointegartion. The included in vitro studies demonstrated increased cell adhesion, proliferation and mineralization of a number of the tested polysaccharide...

  2. 30 CFR 800.17 - Bonding requirements for underground coal mines and long-term coal-related surface facilities and...

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Bonding requirements for underground coal mines... REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS BOND AND INSURANCE REQUIREMENTS FOR SURFACE COAL MINING AND RECLAMATION OPERATIONS UNDER REGULATORY PROGRAMS § 800.17 Bonding requirements for...

  3. Ra-226 collective dosimetry for surface waters in the uranium mining region of Pocos de Caldas

    International Nuclear Information System (INIS)

    Paschoa, A.S.; Sigaud, G.M.; Montenegro, E.C.; Baptista, G.B.

    1980-01-01

    Graphs of the collective dose equivalent for the whole body, bone, gastro-intestinal tract (lower large intestine), kidneys, and liver, via the pathways of drinking water and ingestion of food grown in irrigated fields are presented as a function of the 226 Ra concentrations in the surface waters of the Pocos de Caldas region. The collective dose equivalent calculated from the 226 Ra concentrations measured in the baseline studies are compared with those collective dose equivalent estimated from the projected higher 226 Ra concentrations in the river waters. The 226 Ra concentrations in river waters of the region are expected to be enhanced due to 226 Ra releases from uranium mining and milling operations. The dose equivalent commitment for the exposed population for the referred pathways is also estimated for the contribution of the mine during its predicted time of operation. The assumptions for the dose calculations are presented and the results obtained are discussed. (H.K.)

  4. Treatment of sulphated water of surface origin produced by an open pit coal mine

    Directory of Open Access Journals (Sweden)

    Alan Campos-Sánchez

    2016-12-01

    Full Text Available The purpose of this study was to select the most suitable method of treatment of sulfated water produced by an open pit coal mine in Venezuela. Samples of water taken on surface, middle and bottom of water bodies in three areas were subjected to basic, gravimetric, volumetric and colorimetric analysis. The results indicated that the pH is within limits permitted by current environmental regulations, while total suspended solids, total dissolved solids, and sulfates exceed the normed values. The aerobic wetland method was selected as the most efficient for the removal of sulfates, depending on the physicochemical characteristics of the sulphated waters from the mine and because they are systems that use natural energy to purify water, its construction and maintenance costs Is significantly inferior to the conventional treatments and because, being replicas of natural ecosystems, they are integrated to the environment.

  5. Spatial variation in spoil and vegetative characteristics of pastures on reclaimed surface mined land

    International Nuclear Information System (INIS)

    Teutsch, C.D.; Collins, M.; Ditsch, D.C.

    1999-01-01

    Kentucky has large areas of reclaimed surface mined land that could provide grazing for livestock. Research is needed to determine optimal stocking densities and to evaluate the sustainability of such grazing systems for this region. A long-term grazing study was initiated in 1997 on 151 ha of reclaimed land near Chavies, KY to determine spatial and temporal variation with stocking densities of 0, 0.28, 0.42, or 0.83 beef cow-calf units/ha. Global Positioning System and GIS technologies were used to establish pasture boundaries, locate permanent sampling markers at a density of 1 per 0.4 ha, and interpolate maps of physical, spoil, and vegetable pasture characteristics. Herbage and spoil samples were collected around the permanent markers in May of 1997. Stepwise regression was used to determine factors affecting the vegetative characteristics of the sites. Biomass density ranged from 0 to 2500 kg/ha with a mean of 570 kg/ha. Factors affecting biomass included legume and weed proportions in the sward, grazing activity, soil potassium, elevation, and potential acidity, cumulatively accounting for 32% of the variation. Ground cover ranged from 10 to 100% with an average of 74%. Soil pH, potassium, and grass in the sward accounted for 14% of the variation in ground cover. Legumes made up 0 to 61% of the sward with a mean of 13% over the pasture area. Variables affecting the amount of legume in the sward included biomass density, slope, elevation, pH, and stocking density, together accounting for 21% of the variation. Spatial variation in the physical, spoil, and vegetative characteristics of the pastures was large. Overall, regression accounted for a limited amount of the variation in the vegetative characteristics of the site indicating that other important variables exist

  6. A light reflecting apparatus including a multi-aberration light reflecting surface

    Science.gov (United States)

    Sawicki, R.H.; Sweatt, W.

    1985-11-21

    A light reflecting apparatus including a multi-aberration bendable light reflecting surface is disclosed herein. This apparatus includes a structural assembly comprised of a rectangular plate which is resiliently bendable, to a limited extent, and which has a front side defining the multi-aberration light reflecting surface and an opposite back side, and a plurality of straight leg members rigidly connected with the back side of the plate and extending rearwardly therefrom. The apparatus also includes a number of different adjustment mechanisms, each of which is connected with specific ones of the leg members. These mechanisms are adjustably movable in different ways for applying corresponding forces to the leg members in order to bend the rectangular plate and light reflecting surface into different predetermined curvatures and which specifically include quadratic and cubic curvatures corresponding to different optical aberrations.

  7. Data Mining of Web-Based Documents on Social Networking Sites That Included Suicide-Related Words Among Korean Adolescents.

    Science.gov (United States)

    Song, Juyoung; Song, Tae Min; Seo, Dong-Chul; Jin, Jae Hyun

    2016-12-01

    To investigate online search activity of suicide-related words in South Korean adolescents through data mining of social media Web sites as the suicide rate in South Korea is one of the highest in the world. Out of more than 2.35 billion posts for 2 years from January 1, 2011 to December 31, 2012 on 163 social media Web sites in South Korea, 99,693 suicide-related documents were retrieved by Crawler and analyzed using text mining and opinion mining. These data were further combined with monthly employment rate, monthly rental prices index, monthly youth suicide rate, and monthly number of reported bully victims to fit multilevel models as well as structural equation models. The link from grade pressure to suicide risk showed the largest standardized path coefficient (beta = .357, p adolescents' suicide risk. Real-time suicide-related word search activity monitoring and response system needs to be developed. Copyright © 2016 Society for Adolescent Health and Medicine. Published by Elsevier Inc. All rights reserved.

  8. Using Copulas in the Estimation of the Economic Project Value in the Mining Industry, Including Geological Variability

    Science.gov (United States)

    Krysa, Zbigniew; Pactwa, Katarzyna; Wozniak, Justyna; Dudek, Michal

    2017-12-01

    Geological variability is one of the main factors that has an influence on the viability of mining investment projects and on the technical risk of geology projects. In the current scenario, analyses of economic viability of new extraction fields have been performed for the KGHM Polska Miedź S.A. underground copper mine at Fore Sudetic Monocline with the assumption of constant averaged content of useful elements. Research presented in this article is aimed at verifying the value of production from copper and silver ore for the same economic background with the use of variable cash flows resulting from the local variability of useful elements. Furthermore, the ore economic model is investigated for a significant difference in model value estimated with the use of linear correlation between useful elements content and the height of mine face, and the approach in which model parameters correlation is based upon the copula best matched information capacity criterion. The use of copula allows the simulation to take into account the multi variable dependencies at the same time, thereby giving a better reflection of the dependency structure, which linear correlation does not take into account. Calculation results of the economic model used for deposit value estimation indicate that the correlation between copper and silver estimated with the use of copula generates higher variation of possible project value, as compared to modelling correlation based upon linear correlation. Average deposit value remains unchanged.

  9. Habitat manipulation influences northern bobwhite resource selection on a reclaimed surface mine

    Science.gov (United States)

    Brooke, Jarred M.; Peters, David C.; Unger, Ashley M.; Tanner, Evan P.; Harper, Craig A.; Keyser, Patrick D.; Clark, Joseph D.; Morgan, John J.

    2015-01-01

    More than 600,000 ha of mine land have been reclaimed in the eastern United States, providing large contiguous tracts of early successional vegetation that can be managed for northern bobwhite (Colinus virginianus). However, habitat quality on reclaimed mine land can be limited by extensive coverage of non-native invasive species, which are commonly planted during reclamation. We used discrete-choice analysis to investigate bobwhite resource selection throughout the year on Peabody Wildlife Management Area, a 3,330-ha reclaimed surface mine in western Kentucky. We used a treatment-control design to study resource selection at 2 spatial scales to identify important aspects of mine land vegetation and whether resource selection differed between areas with habitat management (i.e., burning, disking, herbicide; treatment) and unmanaged units (control). Our objectives were to estimate bobwhite resource selection on reclaimed mine land and to estimate the influence of habitat management practices on resource selection. We used locations from 283 individuals during the breeding season (1 Apr–30 Sep) and 136 coveys during the non-breeding season (1 Oct–Mar 31) from August 2009 to March 2014. Individuals were located closer to shrub cover than would be expected at random throughout the year. During the breeding season, individuals on treatment units used areas with smaller contagion index values (i.e., greater interspersion) compared with individuals on control units. During the non-breeding season, birds selected areas with greater shrub-open edge density compared with random. At the microhabitat scale, individuals selected areas with increased visual obstruction >1 m aboveground. During the breeding season, birds were closer to disked areas (linear and non-linear) than would be expected at random. Individuals selected non-linear disked areas during winter but did not select linear disked areas (firebreaks) because they were planted to winter wheat each fall and

  10. Surface coal mine land reclamation using a dry flue gas desulfurization product: Short-term and long-term water responses.

    Science.gov (United States)

    Chen, Liming; Stehouwer, Richard; Tong, Xiaogang; Kost, Dave; Bigham, Jerry M; Dick, Warren A

    2015-09-01

    Abandoned coal-mined lands are a worldwide concern due to their potential negative environmental impacts, including erosion and development of acid mine drainage. A field study investigated the use of a dry flue gas desulfurization product for reclamation of abandoned coal mined land in USA. Treatments included flue gas desulfurization product at a rate of 280 Mg ha(-1) (FGD), FGD at the same rate plus 112 Mg ha(-1) yard waste compost (FGD/C), and conventional reclamation that included 20 cm of re-soil material plus 157 Mg ha(-1) of agricultural limestone (SOIL). A grass-legume sward was planted after treatment applications. Chemical properties of surface runoff and tile water (collected from a depth of 1.2m below the ground surface) were measured over both short-term (1-4 yr) and long-term (14-20 yr) periods following reclamation. The pH of surface runoff water was increased from approximately 3, and then sustained at 7 or higher by all treatments for up to 20 yr, and the pH of tile flow water was also increased and sustained above 5 for 20 yr. Compared with SOIL, concentrations of Ca, S and B in surface runoff and tile flow water were generally increased by the treatments with FGD product in both short- and long-term measurements and concentrations of the trace elements were generally not statistically increased in surface runoff and tile flow water over the 20-yr period. However, concentrations of As, Ba, Cr and Hg were occasionally elevated. These results suggest the use of FGD product for remediating acidic surface coal mined sites can provide effective, long-term reclamation. Copyright © 2015. Published by Elsevier Ltd.

  11. Longwall mining

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-03-14

    As part of EIA`s program to provide information on coal, this report, Longwall-Mining, describes longwall mining and compares it with other underground mining methods. Using data from EIA and private sector surveys, the report describes major changes in the geologic, technological, and operating characteristics of longwall mining over the past decade. Most important, the report shows how these changes led to dramatic improvements in longwall mining productivity. For readers interested in the history of longwall mining and greater detail on recent developments affecting longwall mining, the report includes a bibliography.

  12. Derived surface contamination limits for the uranium mining and milling industry

    International Nuclear Information System (INIS)

    Ching, S.H.

    1984-10-01

    Derived Surface Contamination Limits (DSCL) are proposed for the control of surface contamination at the work place for the uranium mining and milling industry. They have been derived by a method incorporating recent ICRP recommendations and consideration of the radiation exposure pathways of ingestion, inhalation and external irradiation of the basal layer of skin. A generalized DSCL of 10 5 Bq/m 2 of beta activity is recommended for all contaminants likely to be found in uranium mine and mill workplaces except for fresh uranium concentrates. In the latter case, the DSCL is expressed in terms of alpha activity because the ratio of beta to alpha activities for fresh uranium concentrates is variable; the beta activity increases with the ingrowth of U-238 daughter products (Th-234 and Pa-234m) until secular equilibrium is re-established in about six months. A surface contamination limit of 10 4 Bq/m 2 of beta activity is proposed for the release of non-porous materials and equipment with no detectable loose contamination to the public domain

  13. Effect of coal mine dust and clay extracts on the biological activity of the quartz surface

    Energy Technology Data Exchange (ETDEWEB)

    Stone, V.; Jones, R.; Rollo, K.; Duffin, R.; Donaldson, K.; Brown, D.M. [Napier University, Edinburgh (United Kingdom). School of Life Science

    2004-04-01

    Modification of the quartz surface by aluminum salts and metallic iron have been shown to reduce the biological activity of quartz. This study aimed to investigate the ability of water soluble extracts of coal mine dust (CMD), low aluminum clays (hectorite and montmorillonite) and high aluminum clays (attapulgite and kaolin) to inhibit the reactivity of the quartz surface. DQ12 induced significant haemolysis of sheep erythrocytes in vitro and inflammation in vivo as indicated by increases in the total cell numbers, neutrophil cell numbers, MIP-2 protein and albumin content of bronchoalveolar lavage (BAL) fluid. Treatment of DQ12 with CMD extract prevented both haemolysis and inflammation. Extracts of the high aluminum clays (kaolin and attapulgite) prevented inhibition of DQ12 induced haemolysis, and the kaolin extract inhibited quartz driven inflammation. DQ12 induced haemolysis by coal mine dust and kaolin extract could be prevented by pre-treatment of the extracts with a cation chellator. Extracts of the low aluminum clays (montmorillonite and hectorite) did not prevent DQ12 induced haemolysis, although the hectorite extract did prevent inflammation. These results suggest that CMD, and clays both low and rich in aluminum, all contain soluble components (possibly cations) capable of masking the reactivity of the quartz surface.

  14. Arsenic Concentration in the Surface Water of a Former Mining Area: The La Junta Creek, Baja California Sur, Mexico

    Science.gov (United States)

    Imaz Lamadrid, Miguel; Acosta Vargas, Baudilio

    2018-01-01

    The mining activity in the San Antonio-El Triunfo district, located in a mountainous region at 60 km southeast of La Paz, occured for more than 250 years and left behind severe contamination of soils and riverbed sediments which led to elevated concentrations of arsenic and other trace elements in the surface- and groundwater of the region. Although the main mining activity ended around 1911, contamination is still beeing distributed, especially from left behind tailings and mine waste piles. The contamination levels in the groundwater have been reported in several studies, but there is little information available on the surface water quality, and especially the temporal variation. In this study, we analyzed the surface water of the La Junta creek, in the southern part of the San Antonio-El Triunfo mining district. The working hypothesis was that by means of a spatial analysis of surface water and shallow groundwater, in combination with the temporal observation of the concentrations in runoff water, the effects of different sources of arsenic (natural geogene anomalies, due to historic mining activity, and hydrothermal related impact) in the La Junta creek can be recognized. This present study revealed that historic mining activity caused a mojor impact of arsenic but less contamination was observed than in the northern part of the district and elevated arsenic concentrations in stream water generally occurred during times of low streamflow. PMID:29498700

  15. Diagnostic measurements on the great machines conditions of lignite surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Helebrant, F.; Jurman, J.; Fries, J. [Technical University of Ostrava, Ostrava-Poruba (Czech Republic)

    2005-07-01

    An analysis of the diagnosis of loading and service dependability of a rail-mounted excavator used in surface lignite mining is described. Wheel power vibrations in electric motor bearings and electric motor input bearings to the gearbox were measured in situ, in horizontal, vertical, and axial directions. The data were analyzed using a mathematical relationship. The results are presented in a loading diagram that shows the deterioration and the acceptable lower bound of machine conditions over time. Work is continuing. 5 refs., 1 fig.

  16. Numerical modelling of buckling and ploughing slope instability in surface coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Eberhardt, E.; Stead, D. (University of Saskatchewan, Saskatoon, SK (Canada). Dept. of Geological Sciences)

    1993-01-01

    Buckling and ploughing are characteristic failure mechanisms affecting the footwall slopes of surface coal mines. These failures may cause large losses in production, pose serious safety hazards and necessitate extensive deformation monitoring schemes. A brief survey of the factors influencing buckling and ploughing failures is presented based on a detailed examination of the published literature. A critical review of conventional methods of analysis: two-dimensional limit equilibrium, Euler theory, three-hinge buckling and physical modelling, is undertaken. Preliminary results of numerical modelling using finite difference and distinct element techniques are presented using a typical footwall slope and a selected case history. 16 refs., 5 figs., 1 tab.

  17. Fractionation of chemical elements including the REEs and 226Ra in stream contaminated with coal-mine effluent

    International Nuclear Information System (INIS)

    Centeno, L.M.; Faure, G.; Lee, G.; Talnagi, J.

    2004-01-01

    Water draining from abandoned open-pit coal mines in southeastern Ohio typically has a low pH and high concentrations of Fe, Al and Mn, as well as of trace metals (Pb, Cu, Zn, Ni, Co, etc.) and of the rare earth elements (REEs). The cations of different elements are sorbed selectively by Fe and Al hydroxide precipitates which form with increasing pH. As a result, the trace elements are separated from each other when the hydroxide precipitates are deposited in the channel of a flowing stream. Therefore, the low-energy environment of a stream contaminated by mine effluent is a favorable site for the chemical fractionation of the REEs and of other groups of elements with similar chemical properties. The interpretation of chemical analyses of water collected along a 30-km-stretch of Rush Creek near the town of New Lexington, Perry County, Ohio, indicates that the abundances of the REEs in the water appear to change downstream when they are normalized to the REE concentrations of the mine effluent. In addition, the Ce/La ratios (and those of all REEs) in the water decrease consistently downstream. The evidence indicates that the REEs which remain in solution are enriched La and Ce because the other REEs are sorbed more efficiently. The solid Fe(OH) 3 precipitates in the channel of Rush Creek upstream of New Lexington also contain radioactive 226 Ra that was sorbed from the water. This isotope of Ra is a decay product of 238 U which occurs in the Middle Pennsylvanian (Upper Carboniferous) coal and in the associated shale of southeastern Ohio. The activity of 226 Ra of the Fe(OH) 3 precipitates increases with rising pH, but then declines farther downstream as the concentration of Ra remaining in the water decreases

  18. Soil-characterization and soil-amendment use on coal surface mine lands: An annotated bibliography. Information Circular/1991

    International Nuclear Information System (INIS)

    Norland, M.R.; Veith, D.L.

    1991-01-01

    The U.S. Bureau of Mines Report on United States and Canadian Literature pertaining to soil characterization and the use of soil amendments as a part of the reclamation process of coal surface-mined lands contains 1,280 references. The references were published during the 1977 to 1988 period. Each reference is evaluated by keywords, providing the reader with a means of rapidly sorting through the references to locate those articles with the coal mining regions and subjects of interest. All references are annotated

  19. Field Trial of Resin-Based Composite Materials for the Treatment of Surface Collapses Associated with Former Shallow Coal Mining

    OpenAIRE

    Philip T. Broughton; Mark P. Bettney; Isla L. Smail

    2016-01-01

    Effective treatment of ground instability is essential when managing the impacts associated with historic mining. A field trial was undertaken by the Coal Authority to investigate the geotechnical performance and potential use of composite materials comprising resin and fill or stone to safely treat surface collapses, such as crown-holes, associated with shallow mining. Test pits were loosely filled with various granular fill materials. The fill material was injected with commercially availab...

  20. Chemical properties and particle-size distribution of 39 surface-mine spoils in southern West Virginia

    Science.gov (United States)

    William T. Plass; Willis G. Vogel

    1973-01-01

    A survey of 39 surface-mine sites in southern West Virginia showed that most of the spoils from current mining operations had a pH of 5.0 or higher. Soil-size material averaged 37 percent of the weight of the spoils sampled. A major problem for the establishment of vegetation was a deficiency of nitrogen and phosphorus. This can be corrected with additions of...

  1. Full-dimensional diabatic potential energy surfaces including dissociation: the ²E″ state of NO₃.

    Science.gov (United States)

    Eisfeld, Wolfgang; Vieuxmaire, Olivier; Viel, Alexandra

    2014-06-14

    A scheme to produce accurate full-dimensional coupled diabatic potential energy surfaces including dissociative regions and suitable for dynamical calculations is proposed. The scheme is successfully applied to model the two-sheeted surface of the (2)E″ state of the NO3 radical. An accurate potential energy surface for the NO₃⁻ anion ground state is developed as well. Both surfaces are based on high-level ab initio calculations. The model consists of a diabatic potential matrix, which is expanded to higher order in terms of symmetry polynomials of symmetry coordinates. The choice of coordinates is key for the accuracy of the obtained potential energy surfaces and is discussed in detail. A second central aspect is the generation of reference data to fit the expansion coefficients of the model for which a stochastic approach is proposed. A third ingredient is a new and simple scheme to handle problematic regions of the potential energy surfaces, resulting from the massive undersampling by the reference data unavoidable for high-dimensional problems. The final analytical diabatic surfaces are used to compute the lowest vibrational levels of NO₃⁻ and the photo-electron detachment spectrum of NO₃⁻ leading to the neutral radical in the (2)E″ state by full dimensional multi-surface wave-packet propagation for NO3 performed using the Multi-Configuration Time Dependent Hartree method. The achieved agreement of the simulations with available experimental data demonstrates the power of the proposed scheme and the high quality of the obtained potential energy surfaces.

  2. Assessing Surface Hydrological Processes on a Rehabilitated Mine Landform in Northern Australia

    Science.gov (United States)

    Shao, Qi; Saynor, Mike; Lowry, John; Lu, Ping; Baumgartl, Thomas

    2015-04-01

    To assist with the evaluation of the proposed rehabilitation designs for the mine closure at a Uranium Mine, Northern Territory, Australia, a trial landform (200 m × 400 m) was constructed using waste rocks, with its surface ripped along the contour. The surface hydrological performance of this landform was investigated in this study. Field infiltration measurements were conducted using both large and regular ring infiltrometers to investigate the surface hydraulic properties, and water contents and surface runoff were monitored continuously in two 30 m × 30 m runoff plots for four years. A Cellular Automata based runoff model (RunCA) was also used to simulate the runoff behaviors under different rainfall conditions. Results showed a higher infiltration capacity in the areas of rip lines than the non-ripped areas due to the disturbance to the surface. Runoff coefficient was less than 6% and 10% for 80% of the 304 observed rainfall events on plot 1 and plot 2, respectively. The low levels of runoff were well explained by the simulated flow maps of RunCA, which demonstrated the roles of the rip lines in storing flow water and discontinuing the runoff paths. However, when the maximum storage capacity of these rip lines was exceeded during several large rainfall events, the runoff became much more significant and led to high potentials for erosion and landform instability. RunCA simulations on the virtual landforms with higher rip lines indicated dramatically reduced runoff rates. Therefore, it is suggested here that the current landform may be subjected to great runoff and erosion risks under extreme rainfall events, and raising the rip line height may potentially solve this problem.

  3. Changes in the Extent of Surface Mining and Reclamation in the Central Appalachians Detected Using a 1976-2006 Landsat Time Series

    Science.gov (United States)

    Townsend, Philip A.; Helmers, David P.; Kingdon, Clayton C.; McNeil, Brenden E.; de Beurs, Kirsten M.; Eshleman, Keith N.

    2009-01-01

    Surface mining and reclamation is the dominant driver of land cover land use change (LCLUC) in the Central Appalachian Mountain region of the Eastern U.S. Accurate quantification of the extent of mining activities is important for assessing how this LCLUC affects ecosystem services such as aesthetics, biodiversity, and mitigation of flooding.We used Landsat imagery from 1976, 1987, 1999 and 2006 to map the extent of surface mines and mine reclamation for eight large watersheds in the Central Appalachian region of West Virginia, Maryland and Pennsylvania. We employed standard image processing techniques in conjunction with a temporal decision tree and GIS maps of mine permits and wetlands to map active and reclaimed mines and track changes through time. For the entire study area, active surface mine extent was highest in 1976, prior to implementation of the Surface Mine Control and Reclamation Act in 1977, with 1.76% of the study area in active mines, declining to 0.44% in 2006. The most extensively mined watershed, Georges Creek in Maryland, was 5.45% active mines in 1976, declining to 1.83% in 2006. For the entire study area, the area of reclaimed mines increased from 1.35% to 4.99% from 1976 to 2006, and from 4.71% to 15.42% in Georges Creek. Land cover conversion to mines and then reclaimed mines after 1976 was almost exclusively from forest. Accuracy levels for mined and reclaimed cover was above 85% for all time periods, and was generally above 80% for mapping active and reclaimed mines separately, especially for the later time periods in which good accuracy assessment data were available. Among other implications, the mapped patterns of LCLUC are likely to significantly affect watershed hydrology, as mined and reclaimed areas have lower infiltration capacity and thus more rapid runoff than unmined forest watersheds, leading to greater potential for extreme flooding during heavy rainfall events.

  4. Improving weather predictability by including land-surface model parameter uncertainty

    Science.gov (United States)

    Orth, Rene; Dutra, Emanuel; Pappenberger, Florian

    2016-04-01

    The land surface forms an important component of Earth system models and interacts nonlinearly with other parts such as ocean and atmosphere. To capture the complex and heterogenous hydrology of the land surface, land surface models include a large number of parameters impacting the coupling to other components of the Earth system model. Focusing on ECMWF's land-surface model HTESSEL we present in this study a comprehensive parameter sensitivity evaluation using multiple observational datasets in Europe. We select 6 poorly constrained effective parameters (surface runoff effective depth, skin conductivity, minimum stomatal resistance, maximum interception, soil moisture stress function shape, total soil depth) and explore their sensitivity to model outputs such as soil moisture, evapotranspiration and runoff using uncoupled simulations and coupled seasonal forecasts. Additionally we investigate the possibility to construct ensembles from the multiple land surface parameters. In the uncoupled runs we find that minimum stomatal resistance and total soil depth have the most influence on model performance. Forecast skill scores are moreover sensitive to the same parameters as HTESSEL performance in the uncoupled analysis. We demonstrate the robustness of our findings by comparing multiple best performing parameter sets and multiple randomly chosen parameter sets. We find better temperature and precipitation forecast skill with the best-performing parameter perturbations demonstrating representativeness of model performance across uncoupled (and hence less computationally demanding) and coupled settings. Finally, we construct ensemble forecasts from ensemble members derived with different best-performing parameterizations of HTESSEL. This incorporation of parameter uncertainty in the ensemble generation yields an increase in forecast skill, even beyond the skill of the default system. Orth, R., E. Dutra, and F. Pappenberger, 2016: Improving weather predictability by

  5. Mining soil phosphorus by zero P-application: an effective method to reduce the risk of P loading to surface water

    NARCIS (Netherlands)

    Salm, van der C.; Chardon, W.J.; Koopmans, G.F.

    2007-01-01

    This study aims to find field evidence for the effectiveness of P-mining to reduce the risk of P leaching to surface water. In 2002, a P-mining was conducted on four grassland sites in the Netherlands on sand (two sites), peat and clay soils. The mining plots received no P and an annual N surplus of

  6. Local community opinions regarding the socio-environmental aspects of lignite surface mining: Experiences from central Poland

    International Nuclear Information System (INIS)

    Badera, Jarosław; Kocoń, Paweł

    2014-01-01

    Surface lignite mining covers large areas and usually generates social conflicts which pose one of several energy security threats to certain states. Therefore, defining the social conditions determines the success of a mining project. Two communes were chosen for a public opinion study: Kleszczów, where the Bełchatów mine is located, and Złoczew, where a lignite deposit will soon be developed. The analysis shows, as opposed to other areas in Poland that have been projected for development, that both local communities are characterised by a high level of acceptance for lignite mining. In both cases, awareness about the profits was stronger than anxiety about the investment's negative effects. However, most inhabitants could not assess the mining company's diligence concerning its responsibility for mining damages as well as the diligence of external experts assessing the environmental impacts of excavation. Most respondents also could not assess if the legal regulations of public participation in the decision process were sufficient, but the negative opinions outweighed the positive ones. From the perspective of the energy policy, dialogue-type social communication is needed for every case of a new energy-mining project. Research on local public opinion should be the first step to opening up a social debate. - Highlights: • Lignite mining can generate social conflicts, which may threaten energy security. • Examined communes are characterised by a high level of acceptance for lignite mining. • Inhabitants cannot assess if the legal regulations of mining activity are sufficient. • From the perspective of the energy policy, broader social communication is needed. • Research on the public opinion should be the first step to open up a social debate

  7. Debilitating lung disease among surface coal miners with no underground mining tenure.

    Science.gov (United States)

    Halldin, Cara N; Reed, William R; Joy, Gerald J; Colinet, Jay F; Rider, James P; Petsonk, Edward L; Abraham, Jerrold L; Wolfe, Anita L; Storey, Eileen; Laney, A Scott

    2015-01-01

    To characterize exposure histories and respiratory disease among surface coal miners identified with progressive massive fibrosis from a 2010 to 2011 pneumoconiosis survey. Job history, tenure, and radiograph interpretations were verified. Previous radiographs were reviewed when available. Telephone follow-up sought additional work and medical history information. Among eight miners who worked as drill operators or blasters for most of their tenure (median, 35.5 years), two reported poor dust control practices, working in visible dust clouds as recently as 2012. Chest radiographs progressed to progressive massive fibrosis in as few as 11 years. One miner's lung biopsy demonstrated fibrosis and interstitial accumulation of macrophages containing abundant silica, aluminum silicate, and titanium dust particles. Overexposure to respirable silica resulted in progressive massive fibrosis among current surface coal miners with no underground mining tenure. Inadequate dust control during drilling/blasting is likely an important etiologic factor.

  8. Systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions

    Science.gov (United States)

    Cooks, Robert Graham; Li, Anyin; Luo, Qingjie

    2017-08-01

    The invention generally relates to systems and methods for producing metal clusters; functionalized surfaces; and droplets including solvated metal ions. In certain aspects, the invention provides methods that involve providing a metal and a solvent. The methods additionally involve applying voltage to the solvated metal to thereby produce solvent droplets including ions of the metal containing compound, and directing the solvent droplets including the metal ions to a target. In certain embodiments, once at the target, the metal ions can react directly or catalyze reactions.

  9. The Influence of Surface Coal Mining on Runoff Processes and Stream Chemistry in the Elk Valley, British Colubmbia, Canada

    Science.gov (United States)

    Carey, S. K.; Wellen, C. C.; Shatilla, N. J.

    2015-12-01

    Surface mining is a common method of accessing coal. In high-elevation environments, vegetation and soils are typically removed prior to the blasting of overburden rock, thereby allowing access to mineable ore. Following this, the removed overburden rock is deposited in adjacent valleys as waste rock spoils. Previous research has identified that areas downstream of surface coal mining have impaired water quality, yet there is limited information about the interaction of hydrology and geochemistry across a range of mining conditions, particularly at the headwater scale. Here, we provide an analysis of an extensive long-term data set of geochemistry and flows across a gradient of coal mining in the Elk Valley, British Columbia, Canada. This work is part of a broader R&D program examining the influence of surface coal mining on hydrological and water quality responses in the Elk Valley aimed at informing effective management responses. Results indicate that water from waste rock piles has an ionic profile distinct from unimpacted catchments. While the concentration of geochemicals increased with the degree of mine impact, the control of hydrological transport capacity over geochemical export did not vary with degree of mine impact. Geochemical export in mine-influenced catchments was limited more strongly by transport capacity than supply, implying that more water moving through the waste rock mobilized more geochemicals. Placement of waste rock within the catchment (headwaters or outlet) did not affect chemical concentrations but did alter the timing with which chemically distinct water mixed. This work advances on results reported earlier using empirical models of selenium loading and further highlights the importance of limiting water inputs into waste rock piles.

  10. July 2011 Memorandum: Improving EPA Review of Appalachian Surface Coal Mining Operations Under the Clean Water Act, National Environmental Policy Act, and the Environmental Justice Executive Order

    Science.gov (United States)

    Memorandum: Improving EPA Review of Appalachian Surface Coal Mining Operations Under the Clean Water Act, National Environmental Policy Act, and the Environmental Justice Executive Order, July 21, 2011

  11. Vertical Displacement of the Surface Area over the Leakage to the Transverse salt Mine in 1992-2012

    Science.gov (United States)

    Lipecki, Tomasz

    2018-03-01

    The leakage of water in the salt mine caused considerable deformation of the surface. This article shows the vertical displacement in the area of leakage to the mine excavation, measured by precision leveling, carried out from the first days of leakage in 1992 until 2012. The geological and hydrogeological conditions of the mine, as well as the associated water hazards were described, which in conjunction with the inconvenient location of the excavation site in the northern frontage of the Carpathians and also inadequately conducted mining operations, contributed to the risk of flooding mine. The analysis of the vertical movements of the surface - subsidence and uplift - were present as well as the process of formation of the depression trough in the form of maps and graphs. The analyzes were based on 49 measurement series, starting from the first days of the disaster within the next 20 years. The course of development of the depression trough and the condition of the surface after stopping the water from the rock mass has been shown, which caused the surface to uplift.

  12. Windborne transport and surface enrichment of arsenic in semi-arid mining regions: Examples from the Mojave Desert, California

    Science.gov (United States)

    Kim, Christopher S.; Anthony, Tyler L.; Goldstein, Daniel; Rytuba, James J.

    2014-09-01

    Gold and silver mining conducted throughout the state of California has left an environmental legacy of exposed mine wastes containing elevated levels of toxic metals and metalloids including arsenic (As), a known carcinogen. These mine tailings, particularly the fine-grained size fractions, are susceptible to weathering and windborne transport, significantly increasing the spatial extent of contamination in topsoils and potential exposure of humans to toxic metal(loid)s. Depth-based field sampling of soils surrounding several abandoned mines in the Mojave Desert (Southern CA) have identified an exponential decline in As soil enrichment with both depth and increasing distance from tailings piles to the east, consistent with prevailing west-to-east wind directions. In vitro extraction studies using a phagolysosomal simulant fluid (PSF), mimicking the inhalation of the most finely sieved size fraction of selected samples (⩽20 μm), indicate that initial solid As concentration is the strongest indicator in predicting the concentration of As released in the lung. When extraction data are incorporated into exposure risk assessment calculations, the majority of samples investigated exceed both cancer risk thresholds and non-cancer-related minimal risk levels (MRLs) based on long-term chronic exposure to airborne mine tailings dusts. This suggests that long-term residents of communities located close to these abandoned mine sites, especially those who reside downwind (i.e. east) of mine tailings piles, face possible health effects due to the inhalation of fine-grained mine tailings mobilized through aeolian processes.

  13. Mining for diagnostic information in body surface potential maps: A comparison of feature selection techniques

    Directory of Open Access Journals (Sweden)

    McCullagh Paul J

    2005-09-01

    Full Text Available Abstract Background In body surface potential mapping, increased spatial sampling is used to allow more accurate detection of a cardiac abnormality. Although diagnostically superior to more conventional electrocardiographic techniques, the perceived complexity of the Body Surface Potential Map (BSPM acquisition process has prohibited its acceptance in clinical practice. For this reason there is an interest in striking a compromise between the minimum number of electrocardiographic recording sites required to sample the maximum electrocardiographic information. Methods In the current study, several techniques widely used in the domains of data mining and knowledge discovery have been employed to mine for diagnostic information in 192 lead BSPMs. In particular, the Single Variable Classifier (SVC based filter and Sequential Forward Selection (SFS based wrapper approaches to feature selection have been implemented and evaluated. Using a set of recordings from 116 subjects, the diagnostic ability of subsets of 3, 6, 9, 12, 24 and 32 electrocardiographic recording sites have been evaluated based on their ability to correctly asses the presence or absence of Myocardial Infarction (MI. Results It was observed that the wrapper approach, using sequential forward selection and a 5 nearest neighbour classifier, was capable of choosing a set of 24 recording sites that could correctly classify 82.8% of BSPMs. Although the filter method performed slightly less favourably, the performance was comparable with a classification accuracy of 79.3%. In addition, experiments were conducted to show how (a features chosen using the wrapper approach were specific to the classifier used in the selection model, and (b lead subsets chosen were not necessarily unique. Conclusion It was concluded that both the filter and wrapper approaches adopted were suitable for guiding the choice of recording sites useful for determining the presence of MI. It should be noted however

  14. Utilization of textile surface covers for stabilizing slopes in brown coal surface mines

    Energy Technology Data Exchange (ETDEWEB)

    Rathmann, K.; Ganz, R.; Taubert, E.; Scheler, D.

    1980-01-01

    Results are presented of tests on preventing slope erosion at a spoil bank by covering inclined surfaces with textile. Three polyethylene and one polyamide cloth types with varying mesh size and material elasticity were attached to the ground after seeding of grass plants. Slope erosion and grass growth were evaluated at three-week intervals. Best results were achieved with polyethylene cloth with a 10/20 mm mesh to facilitate grass growth and with low elasticity, which showed the best adaption to the slope of the ground and prevented washout from below. Economic advantages of using surface covers are described as reducing expenditures in labor employed in slope maintenance. A 50% cost saving is estimated, which depends on the availability of low cost ground covers, preferably from waste products. The suitability of textile from magnetic tape scrap will be tested.

  15. Role of soil health in maintaining environmental sustainability of surface coal mining.

    Science.gov (United States)

    Acton, Peter M; Fox, James F; Campbell, J Elliott; Jones, Alice L; Rowe, Harold; Martin, Darren; Bryson, Sebastian

    2011-12-01

    Mountaintop coal mining (MCM) in the Southern Appalachian forest region greatly impacts both soil and aquatic ecosystems. Policy and practice currently in place emphasize water quality and soil stability but do not consider upland soil health. Here we report soil organic carbon (SOC) measurements and other soil quality indicators for reclaimed soils in the Southern Appalachian forest region to quantify the health of the soil ecosystem. The SOC sequestration rate of the MCM soils was 1.3 MgC ha(-1) yr(-1) and stocks ranged from 1.3 ± 0.9 to 20.9 ± 5.9 Mg ha(-1) and contained only 11% of the SOC of surrounding forest soils. Comparable reclaimed mining soils reported in the literature that are supportive of soil ecosystem health had SOC stocks 2.5-5 times greater than the MCM soils and sequestration rates were also 1.6-3 times greater. The high compaction associated with reclamation in this region greatly reduces both the vegetative rooting depth and infiltration of the soil and increases surface runoff, thus bypassing the ability of soil to naturally filter groundwater. In the context of environmental sustainability of MCM, it is proposed that the entire watershed ecosystem be assessed and that a revision of current policy be conducted to reflect the health of both water and soil.

  16. Measurement of sub-surface strata behaviour in bord and pillar mining: a case study

    International Nuclear Information System (INIS)

    Krishna, R.

    1991-01-01

    Ranigunj coalfield (India) has been facing significant problems due to subsidence as a result of underground mining of coal seams. The occurrence of the thick seams in close proximity, shallow depth, great variation in the nature of superincumbent strata from site to site, followed by the slow rate of extraction, has aggravated subsidence problems. In the recent past, many such workings have collapsed, damaging a large number of surface structures. In view of the aforesaid need, a comprehensive project financed by the Ministry of Energy (Coal), was undertaken by the Department of Mining Engineering, Indian Institute of Technology, Kharagpur, at a Colliery in Ranigunj Coalfield. This investigation revealed that the caving horizon occurred at 4 times the extracted seam height, which differs from the findings in the UK, USA, and Australia. Also, it appears possible to estimate strata displacements from geological and physicomechanical information from the overlying rocks using the bending moment principle. Further, it was observed that the shallow workings could give rise to a sink hole type of subsidence, which is dangerous and could adversely affect the environment, safety of the public and properties. 11 refs., 13 figs., 1 tab

  17. Control and evaluation methodology of reclaimed surfaces in coal mines; Metodologia para el Seguimiento y Evaluacion de Superficies Restauradas en Minas de Carbon

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The objective of the project has been to establish a control and evaluation methodology of reclaimed surfaces in coal mines, ash dumps,... etc. to be applied especially in locations with limited availability of ton soil, and to be used by mining companies to establish an internal quality control of the reclamation carried out. This methodology has been developed based on the evaluation of the results obtained from the reclamation that Endesa carries out at the Puentes mine. An operating and simplified method which may be adopted by smaller sites has been developed. This project has been carried out during the period 1994-1996 and includes a study about the physicochemical conditions of reclaimed surfaces, soil organisms study and about vegetation productivity associated to micorrizae. The conclusions and recommendations obtained include reclamation techniques (study and management of the deposit dumped, top soil management, addition of basic correctors, fertilization, top soil and maintenance works) and reclaimed surface control techniques (physicochemical soil conditions, soil organisms and vegetation). (Author)

  18. Surface Soil Preparetion for Leguminous Plants Growing in Degraded Areas by Mining Located in Amazon Forest-Brazil

    Science.gov (United States)

    Irio Ribeiro, Admilson; Hashimoto Fengler, Felipe; Araújo de Medeiros, Gerson; Márcia Longo, Regina; Frederici de Mello, Giovanna; José de Melo, Wanderley

    2015-04-01

    The revegetation of areas degraded by mining usually requires adequate mobilization of surface soil for the development of the species to be implemented. Unlike the traditional tillage, which has periodicity, the mobilization of degraded areas for revegetation can only occur at the beginning of the recovery stage. In this sense, the process of revegetation has as purpose the establishment of local native vegetation with least possible use of inputs and superficial tillage in order to catalyze the process of natural ecological succession, promoting the reintegration of areas and minimizing the negative impacts of mining activities in environmental. In this context, this work describes part of a study of land reclamation by tin exploitation in the Amazon ecosystem in the National Forest Jamari- Rondonia Brazil. So, studied the influence of surface soil mobilization in pit mine areas and tailings a view to the implementation of legumes. The results show that the surface has areas of mobilizing a significant effect on the growth of leguminous plants, areas for both mining and to tailings and pit mine areas.

  19. Evaluation of the susceptibility to pitting corrosion of structural steels, including steels with modified surface

    International Nuclear Information System (INIS)

    Lunarska, E.; Nikiforow, K.

    2001-01-01

    Although the low alloy ferrite-perlite and bainite-martensite steels mostly undergo the general corrosion, pitting corrosion occurring under certain conditions jeopardizes the safety of installations, causing perforation of walls or initiation of crack. On the basis of electrochemical, corrosion and microscopic examinations, the conditions simulating typical industrial corrosion environments, containing Cl - ions have been selected, to which the parts of machines, devices and installation are subjected. The test parameters provide the preferential pitting corrosion without prevailing general corrosion, and provide the similar type of corrosion of different kinds of ferrite-perlite and bainite-martensite steels, including steels with modified surface layer. The proposed express method allows to evaluate the susceptibility to pitting corrosion and to evaluate the effect of surface modification on susceptibility to pitting corrosion in environments containing Cl - ions. The method may be applied for the proper selection of materials exploited under pitting corrosion conditions and for preparation of precorroded samples for mechanical testing. (author)

  20. SHARC: ab Initio Molecular Dynamics with Surface Hopping in the Adiabatic Representation Including Arbitrary Couplings.

    Science.gov (United States)

    Richter, Martin; Marquetand, Philipp; González-Vázquez, Jesús; Sola, Ignacio; González, Leticia

    2011-05-10

    We present a semiclassical surface-hopping method which is able to treat arbitrary couplings in molecular systems including all degrees of freedom. A reformulation of the standard surface-hopping scheme in terms of a unitary transformation matrix allows for the description of interactions like spin-orbit coupling or transitions induced by laser fields. The accuracy of our method is demonstrated in two systems. The first one, consisting of two model electronic states, validates the semiclassical approach in the presence of an electric field. In the second one, the dynamics in the IBr molecule in the presence of spin-orbit coupling after laser excitation is investigated. Due to an avoided crossing that originates from spin-orbit coupling, IBr dissociates into two channels: I + Br((2)P3/2) and I + Br*((2)P1/2). In both systems, the obtained results are in very good agreement with those calculated from exact quantum dynamical simulations.

  1. A novel technique for including surface tension in PLIC-VOF methods

    Energy Technology Data Exchange (ETDEWEB)

    Meier, M.; Yadigaroglu, G. [Swiss Federal Institute of Technology, Nuclear Engineering Lab. ETH-Zentrum, CLT, Zurich (Switzerland); Smith, B. [Paul Scherrer Inst. (PSI), Villigen (Switzerland). Lab. for Thermal-Hydraulics

    2002-02-01

    Various versions of Volume-of-Fluid (VOF) methods have been used successfully for the numerical simulation of gas-liquid flows with an explicit tracking of the phase interface. Of these, Piecewise-Linear Interface Construction (PLIC-VOF) appears as a fairly accurate, although somewhat more involved variant. Including effects due to surface tension remains a problem, however. The most prominent methods, Continuum Surface Force (CSF) of Brackbill et al. and the method of Zaleski and co-workers (both referenced later), both induce spurious or 'parasitic' currents, and only moderate accuracy in regards to determining the curvature. We present here a new method to determine curvature accurately using an estimator function, which is tuned with a least-squares-fit against reference data. Furthermore, we show how spurious currents may be drastically reduced using the reconstructed interfaces from the PLIC-VOF method. (authors)

  2. Coal Mine Permit Boundaries

    Data.gov (United States)

    Earth Data Analysis Center, University of New Mexico — ESRI ArcView shapefile depicting New Mexico coal mines permitted under the Surface Mining Control and Reclamation Act of 1977 (SMCRA), by either the NM Mining these...

  3. 3D modeling of surface quarries and deposits of mined materials and the monitoring of slopes

    OpenAIRE

    Ivan Maňas

    2007-01-01

    The application of computer technology by simulating opencast mining and deposits of raw materials. The mathematic principles of three-dimensional probabilistic models of raw materials deposits and a familiarization with the user interface software GEOLOGICKY MODEL. The principles of the simulation of opencast mines, generation intersections with models of raw materials deposits, computation of mining materials with the quality scaling,and the design of advanced mining with the software BANSK...

  4. Text Mining.

    Science.gov (United States)

    Trybula, Walter J.

    1999-01-01

    Reviews the state of research in text mining, focusing on newer developments. The intent is to describe the disparate investigations currently included under the term text mining and provide a cohesive structure for these efforts. A summary of research identifies key organizations responsible for pushing the development of text mining. A section…

  5. Simulated effects of surface coal mining and agriculture on dissolved solids in the Redwater River, east-central Montana

    Science.gov (United States)

    Ferreira, R.F.; Lambing, J.H.

    1985-01-01

    Dissolved solids concentrations in five reaches of the Redwater River in east-central Montana were simulated to evaluate the effects of surface coal mining and agriculture. A mass-balance model of streamflow and dissolved solids load developed for the Tongue River in southeastern Montana was modified and applied to the Redwater River. Mined acreages, dissolved solids concentrations in mined spoils, and irrigated acreage can be varied in the model to study relative changes in the dissolved solids concentration in consecutive reaches of the river. Because of extreme variability and a limited amount of data, the model was not consecutively validated. Simulated mean and median monthly mean streamflows and consistently larger than those calculated from streamflow records. Simulated mean and median monthly mean dissolved solids loads also are consistently larger than regression-derived values. These discrepancies probably result from extremely variable streamflow, overestimates of streamflow from ungaged tributaries, and weak correlations between streamflow and dissolved solids concentrations. The largest increases in simulated dissolved solids concentrations from mining and agriculture occur from September through January because of smaller streamflows and dissolved solids loads. Different combinations of agriculture and mining under mean flow conditions resulted in cumulative percentage increases of dissolved solids concentrations of less than 5% for mining and less than 2% for agriculture. (USGS)

  6. Distributions and concentrations of thallium in surface waters of a region impacted by historical metal mining (Cornwall, UK).

    Science.gov (United States)

    Tatsi, Kristi; Turner, Andrew

    2014-03-01

    Thallium is a highly toxic heavy metal whose concentrations and distributions in the aquatic environment are poorly defined. In this study, concentrations of aqueous and total Tl have been measured in water samples from a variety of rivers and effluents (the latter related to historical metal mining) in the county of Cornwall, SW England. Aqueous concentrations ranged from about 13 ng L(-1) in a river whose catchment contained no metal mines to 2,640 ng L(-1) in water abstracted directly from an abandoned mine shaft. Concentrations of Tl in rivers were greatest in the vicinity of mine-related effluents, with a maximum value measured of about 770 ng L(-1). Thallium was not efficiently removed by the conventional, active treatment of mine water, and displayed little interaction with suspended particles. Its mobility in surface waters, coupled with concentrations that are close to a quality guideline of 800 ng L(-1), is cause for concern. Accordingly, we recommend that the metal is more closely monitored in this and other regions impacted by mining activities. Copyright © 2013 Elsevier B.V. All rights reserved.

  7. Radiological assessment of surface water quality around proposed uranium mining site in India.

    Science.gov (United States)

    Jha, S K; Lenka, P; Gothankar, S; Tripathi, R M; Puranik, V D; Khating, D T

    2009-06-01

    The gross alpha and gross beta activities were estimated for radiological assessment of surface water quality around the proposed uranium mining site Kylleng Pyndengsohiong Mawthabah (Domiasiat), West Khasi Hills District, Meghalaya situated in a high rainfall area (12,000mm) in India. 189 Surface water samples were collected over different seasons of the year from nine different locations covering around 100km(2). Gross beta activities were found to vary from 144 to 361mBq/L which is much below the prescribed WHO limit of 1000mBq/L for drinking water. Gross alpha activities varied from 61 to 127mBq/L. These values are much below the reported gross alpha values by other countries. In about 7% of the samples the alpha activities remain exceeded the WHO guideline limit of 100mBq/L. Surface water samples collected during the summer season of the year show higher activity whereas low activity was found from samples collected during monsoon season. Results show that all water sources are acceptable as drinking water for human consumption from the radiological point of view, the higher gross alpha concentrations in a few locations remains so only for short duration during the summer season.

  8. Radiological assessment of surface water quality around proposed uranium mining site in India

    International Nuclear Information System (INIS)

    Jha, S.K.; Lenka, P.; Gothankar, S.; Tripathi, R.M.; Puranik, V.D.; Khating, D.T.

    2009-01-01

    The gross alpha and gross beta activities were estimated for radiological assessment of surface water quality around the proposed uranium mining site Kylleng Pyndengsohiong Mawthabah (Domiasiat), West Khasi Hills District, Meghalaya situated in a high rainfall area (12,000 mm) in India. 189 Surface water samples were collected over different seasons of the year from nine different locations covering around 100 km 2 . Gross beta activities were found to vary from 144 to 361 mBq/L which is much below the prescribed WHO limit of 1000 mBq/L for drinking water. Gross alpha activities varied from 61 to 127 mBq/L. These values are much below the reported gross alpha values by other countries. In about 7% of the samples the alpha activities remain exceeded the WHO guideline limit of 100 mBq/L. Surface water samples collected during the summer season of the year show higher activity whereas low activity was found from samples collected during monsoon season. Results show that all water sources are acceptable as drinking water for human consumption from the radiological point of view, the higher gross alpha concentrations in a few locations remains so only for short duration during the summer season.

  9. Consistent retrieval of land surface radiation products from EO, including traceable uncertainty estimates

    Science.gov (United States)

    Kaminski, Thomas; Pinty, Bernard; Voßbeck, Michael; Lopatka, Maciej; Gobron, Nadine; Robustelli, Monica

    2017-05-01

    Earth observation (EO) land surface products have been demonstrated to provide a constraint on the terrestrial carbon cycle that is complementary to the record of atmospheric carbon dioxide. We present the Joint Research Centre Two-stream Inversion Package (JRC-TIP) for retrieval of variables characterising the state of the vegetation-soil system. The system provides a set of land surface variables that satisfy all requirements for assimilation into the land component of climate and numerical weather prediction models. Being based on a 1-D representation of the radiative transfer within the canopy-soil system, such as those used in the land surface components of advanced global models, the JRC-TIP products are not only physically consistent internally, but they also achieve a high degree of consistency with these global models. Furthermore, the products are provided with full uncertainty information. We describe how these uncertainties are derived in a fully traceable manner without any hidden assumptions from the input observations, which are typically broadband white sky albedo products. Our discussion of the product uncertainty ranges, including the uncertainty reduction, highlights the central role of the leaf area index, which describes the density of the canopy. We explain the generation of products aggregated to coarser spatial resolution than that of the native albedo input and describe various approaches to the validation of JRC-TIP products, including the comparison against in situ observations. We present a JRC-TIP processing system that satisfies all operational requirements and explain how it delivers stable climate data records. Since many aspects of JRC-TIP are generic, the package can serve as an example of a state-of-the-art system for retrieval of EO products, and this contribution can help the user to understand advantages and limitations of such products.

  10. Nesting success of grassland and savanna birds on reclaimed surface coal mines of the midwestern United States

    Energy Technology Data Exchange (ETDEWEB)

    Galligan, E.W.; DeVault, T.L.; Lima, S.L. [Indiana State University, Terre Haute, IN (United States)

    2006-12-15

    Reclaimed surface coal mines in southwestern Indiana support many grassland and shrub/savanna bird species of conservation concern. We examined the nesting success of birds on these reclaimed mines to assess whether such 'unnatural' places represent productive breeding habitats for such species. We established eight study sites on two large, grassland-dominated mines in southwestern Indiana and classified them into three categories (open grassland, shrub/savanna, and a mixture of grassland and shrub/savanna) based on broad vegetation and landscape characteristics. During the 1999 and 2000 breeding seasons, we found and monitored 911 nests of 31 species. Daily nest survival for the most commonly monitored grassland species ranged from 0.903 (Dickcissel, Spiza americana) to 0.961 (Grasshopper Sparrow, Ammodramus savannarum). Daily survival estimates for the dominant shrub/savanna nesting species ranged from 0.932 (Brown Thrasher, Toxostoma rufum) to 0.982 (Willow Flycatcher, Empidonax traillii). Vegetation and landscape effects on nesting success were minimal, and only Eastern Meadowlarks (Sturnella magna) showed a clear time-of-season effect, with greater nesting success in the first half of the breeding season. Rates of Brown-headed Cowbird (Molothrus ater) parasitism were only 2.1% for grassland species and 12.0% for shrub/savanna species. The nesting success of birds on reclaimed mine sites was comparable to that in other habitats, indicating that reclaimed habitats on surface mines do not necessarily represent reproductive traps for birds.

  11. Development of near surface seismic methods for urban and mining applications

    Science.gov (United States)

    Malehmir, Alireza; Brodic, Bojan; Place, Joachim; Juhlin, Christopher; Bastani, Mehrdad

    2014-05-01

    There is a great need to improve our understanding of the geological conditions in the shallow subsurface. Direct observations of the subsurface are cumbersome and expensive, and sometimes impossible. Urban and mining areas are especially challenging due to various sources of noise such as from traffic, buildings, cars, city trains, trams, bridges and high-voltage power-lines. Access is also restricted both in time and space, which requires the equipment to be versatile, fast to set up and pack, and produces the least disruptions. However, if properly designed and implemented, geophysical methods are capable of imaging detailed subsurface structures and can successfully be used to provide crucial information for site characterizations, infrastructure planning, brown- and near-field exploration, and mine planning. To address some of these issues Uppsala University, in collaboration with a number of public authorities, research organizations and industry partners, has recently developed a prototype broadband (0-800 Hz based on digital sensors) multi-component seismic landstreamer system. The current configuration consists of three segments with twenty 3C-sensors each 2 m apart and an additional segment with twenty 3C-sensors each 4 m apart, giving a total streamer length of 200 m. These four segments can be towed in parallel or in series, which in combination with synchronized wireless and cabled sensors can address a variety of complex near surface problems. The system is especially geared for noisy environments and areas where high-resolution images of the subsurface are needed. The system has little sensitivity to electrical noise and measures sensor tilt, important in rough terrains, so it can immediately be corrected for during the acquisition. Thanks to the digital sensors, the system can also be used for waveform tomography and multi-channel analysis of surface waves (MASW). Both these methods require low frequencies and these are often sacrificed in

  12. Derived limits for occupational exposure to uranium mine and mill dusts in the air and on surfaces

    International Nuclear Information System (INIS)

    Carter, M.W.

    1983-01-01

    Limits are derived for the concentration of uranium mine and mill dusts in the air based on ICRP30 and assumptions regarding the isotopic make up of the dusts. From these limits using a resuspension factor, limits for surface contamination are derived. Calculations are presented of the dose to the basal layer of the skin from mine and mill dusts on the skin. From these calculations limits for skin contamination are derived. A calculation of a limit based on direct ingestion is also presented. Exposure limits for the public are not considered

  13. Hydrogeochemical features of surface water and groundwater contaminated with acid mine drainage (AMD) in coal mining areas: a case study in southern Brazil.

    Science.gov (United States)

    Galhardi, Juliana Aparecida; Bonotto, Daniel Marcos

    2016-09-01

    Effects of acid mine drainage (AMD) were investigated in surface waters (Laranjinha River and Ribeirão das Pedras stream) and groundwaters from a coal mining area sampled in two different seasons at Figueira city, Paraná State, Brazil. The spatial data distribution indicated that the acid effluents favor the chemical elements leaching and transport from the tailings pile into the superficial water bodies or aquifers, modifying their quality. The acid groundwaters in both sampling periods (dry: pH 2.94-6.04; rainy: pH 3.25-6.63) were probably due to the AMD generation and infiltration, after the oxidation of sulfide minerals. Such acid effluents cause an increase of the solubilization rate of metals, mainly iron and aluminum, contributing to both groundwater and surface water contamination. Sulfate in high levels is a result of waters' pollution due to AMD. In some cases, high sulfate and low iron contents, associated with less acidic pH values, could indicate that AMD, previously generated, is nowadays being neutralized. The chemistry of the waters affected by AMD is controlled by the pH, sulfide minerals' oxidation, oxygen, iron content, and microbial activity. It is also influenced by seasonal variations that allow the occurrence of dissolution processes and the concentration of some chemical elements. Under the perspective of the waters' quality evaluation, the parameters such as conductivity, dissolved sodium, and sulfate concentrations acted as AMD indicators of groundwaters and surface waters affected by acid effluents.

  14. Mercury distribution in coals influenced by magmatic intrusions, and surface waters from the Huaibei Coal Mining District, Anhui, China

    International Nuclear Information System (INIS)

    Yan, Zhicao; Liu, Guijian; Sun, Ruoyu; Wu, Dun; Wu, Bin; Zhou, Chuncai

    2013-01-01

    Highlights: • Hg concentrations in coal and surface water samples were determined. • Hg is enriched in the Huaibei coals. • Magmatic activities imparted influences on Hg content and distribution. • Hg contents in surface waters are relative low at the present status. - Abstract: The Hg concentrations in 108 samples, comprising 81 coal samples, 1 igneous rock, 2 parting rock samples and 24 water samples from the Huaibei Coal Mining District, China, were determined by cold-vapor atomic fluorescence spectrometry. The abundance and distribution of Hg in different coal mines and coal seams were studied. The weighted average Hg concentration for all coal samples in the Huaibei Coalfield is 0.42 mg/kg, which is about twice that of average Chinese coals. From southwestern to northeastern coalfield, Hg concentration shows a decreasing trend, which is presumably related to magmatic activity and fault structures. The relatively high Hg levels are observed in coal seams Nos. 6, 7 and 10 in the southwestern coal mines. Correlation analysis indicates that Hg in the southwestern and southernmost coals with high Hg concentrations is associated with pyrite. The Hg concentrations in surface waters in the Huaibei Coal Mining District range from 10 to 60 ng/L, and display a decreasing trend with distance from a coal waste pile but are lower than the regulated levels for Hg in drinking water

  15. Mining in the G. D. R. and landscape restoration

    Energy Technology Data Exchange (ETDEWEB)

    Strzodka, K.

    1987-06-01

    The author reviews aspects of surface mining in the GDR, including production figures of 1983, surface mine drainage, land devastation and land recultivation measures. Total GDR surface mining production was 448 Mt in 1983, two thirds made up by brown coal. Brown coal seam depth and other geological features are explained. Land devastated by mining increased annually by 3,000 ha; only 50% of the total land devastated by surface mining has been given over for recultivation. Statistics on the decrease of agriculturally used land in the period from 1955 to 1984 are provided. Water drainage from surface mines increased to a total of 1,7200x10/sup 6/ m/sup 3/ in 1984, supplementing the industrial water requirement. Examples are given for recultivated landscapes after completion of surface and underground mining. (MOS).

  16. Long-term effects of surface coal mining on ground-water levels and quality in two small watersheds in eastern Ohio

    International Nuclear Information System (INIS)

    Cunningham, W.L.; Jones, R.L.

    1990-01-01

    Two small eastern Ohio watersheds surface mined for coal and reclaimed were studied during 1986-89. Water level and water quality data were compared with data from investigations conducted during 1976-83 to determine long-term effects of surface mining on the hydrologic system. Before mining, the watersheds were characterized by flatlying sedimentary rocks above clay beds underlying two major coal seams. Two aquifers overlay each under clay. Surface mining removed the upper aquifer, stripped the coal seam, and replaced the spoil, creating a new aquifer with hydraulic and chemical characteristics different from those of the original upper aquifer. Water levels were measured continuously in one well in each aquifer and every 2 months in other wells. Water levels in upper aquifers reached hydraulic equilibrium from 2 to 5 years after mining and, in middle aquifers, water levels increased more than 5 ft during mining; equilibrium occurred almost immediately thereafter. Water samples were collected from three upper aquifer wells, one middle-aquifer well, a seep from the upper aquifer, and the stream in each watershed. Samples were collected in 1986, 1987, 1988, and 1989. In both watersheds, sulfate replaced bicarbonate as the dominant anion in the upper aquifer after mining. In general, significant increases in concentrations of dissolved constituents in groundwater resulted from surface mining. The continued decrease in pH indicates that groundwater had not reached complete geochemical equilibrium in either watershed more than 8 years after mining ended

  17. 3D modeling of surface quarries and deposits of mined materials and the monitoring of slopes

    Directory of Open Access Journals (Sweden)

    Ivan Maňas

    2007-06-01

    Full Text Available The application of computer technology by simulating opencast mining and deposits of raw materials. The mathematic principles of three-dimensional probabilistic models of raw materials deposits and a familiarization with the user interface software GEOLOGICKY MODEL. The principles of the simulation of opencast mines, generation intersections with models of raw materials deposits, computation of mining materials with the quality scaling,and the design of advanced mining with the software BANSKY MODEL.The monitoring the potential of dynamic movements’ of unstable slopes with the automatic total station and a following interpretation in general time intervals by means of the software MONITORING.

  18. Research on the surface water quality in mining influenced area in north-western part of Romania

    Directory of Open Access Journals (Sweden)

    Smical Irina

    2015-01-01

    Full Text Available The paper highlights the current situation of the quality of surface water in the areas influenced by mining activities in the north-western part of Romania. In this respect a series of investigations have been conducted regarding the contamination with heavy metals of the water of the Someş and Tisa hydro- graphic Basins, which cover the northern part of Maramures County and the south-western area of Maramures County, respectively. The results of the comparative research refer to the period between 1999 and 2011 and reveal the specific heavy metal ions of mining activity: Fe, Mn, Zn, Cu, Pb Cd and Ni, as well as the water pH. The presented values as annual average values reveal an increase in several heavy metals after the closure of mines, which is due to the lack of effectiveness of the closure and of the conservation of the mine galleries, as well as of the impaired functioning of the mining wastewater treatment plants.

  19. Geochemical evolution of acidic ground water at a reclaimed surface coal mine in western Pennsylvania

    Science.gov (United States)

    Cravotta,, Charles A.

    1991-01-01

    Concentrations of dissolved sulfate and acidity in ground water increase downflow in mine spoil and underlying bedrock at a reclaimed surface coal mine in the bituminous field of western Pennsylvania. Elevated dissolved sulfate and negligible oxygen in ground water from bedrock about 100 feet below the water table suggest that pyritic sulfur is oxidized below the water table, in a system closed to oxygen. Geochemical models for the oxidation of pyrite (FeS2) and production of sulfate (SO42-) and acid (H+) are presented to explain the potential role of oxygen (O2) and ferric iron (Fe3+) as oxidants. Oxidation of pyrite by O2 and Fe3+ can occur under oxic conditions above the water table, whereas oxidation by Fe3+ also can occur under anoxic conditions below the water table. The hydrated ferric-sulfate minerals roemerite [Fe2+Fe43+(SO4)4·14H2O], copiapite [Fe2+Fe43+(SO4)6(OH)2·20H20], and coquimbite [Fe2(SO4)3·9H2O] were identified with FeS2 in coal samples, and form on the oxidizing surface of pyrite in an oxic system above the water table. These soluble ferric-sulfate 11 salts11 can dissolve with recharge waters or a rising water table releasing Fe3+, SO42-. and H+, which can be transported along closed-system ground-water flow paths to pyrite reaction sites where O2 may be absent. The Fe3+ transported to these sites can oxidize pyritic sulfur. The computer programs WATEQ4F and NEWBAL were used to compute chemical speciation and mass transfer, respectively, considering mineral dissolution and precipitation reactions plus mixing of waters from different upflow zones. Alternative mass-balance models indicate that (a) extremely large quantities of O2, over 100 times its aqueous solubility, can generate the observed concentrations of dissolved SO42- from FeS2, or (b) under anoxic conditions, Fe3+ from dissolved ferric-sulfate minerals can oxidize FeS2 along closed-system ground-water flow paths. In a system open to O2, such as in the unsaturated zone, the aqueous

  20. Surface-water and groundwater interactions in an extensively mined watershed, upper Schuylkill River, Pennsylvania, USA

    Science.gov (United States)

    Cravotta,, Charles A.; Goode, Daniel J.; Bartles, Michael D.; Risser, Dennis W.; Galeone, Daniel G.

    2014-01-01

    Streams crossing underground coal mines may lose flow, while abandoned mine drainage (AMD) restores flow downstream. During 2005-12, discharge from the Pine Knot Mine Tunnel, the largest AMD source in the upper Schuylkill River Basin, had near-neutral pH and elevated concentrations of iron, manganese, and sulfate. Discharge from the tunnel responded rapidly to recharge but exhibited a prolonged recession compared to nearby streams, consistent with rapid infiltration and slow release of groundwater from the mine. Downstream of the AMD, dissolved iron was attenuated by oxidation and precipitation while dissolved CO2 degassed and pH increased. During high-flow conditions, the AMD and downstream waters exhibited decreased pH, iron, and sulfate with increased acidity that were modeled by mixing net-alkaline AMD with recharge or runoff having low ionic strength and low pH. Attenuation of dissolved iron within the river was least effective during high-flow conditions because of decreased transport time coupled with inhibitory effects of low pH on oxidation kinetics. A numerical model of groundwater flow was calibrated using groundwater levels in the Pine Knot Mine and discharge data for the Pine Knot Mine Tunnel and the West Branch Schuylkill River during a snowmelt event in January 2012. Although the calibrated model indicated substantial recharge to the mine complex took place away from streams, simulation of rapid changes in mine pool level and tunnel discharge during a high flow event in May 2012 required a source of direct recharge to the Pine Knot Mine. Such recharge produced small changes in mine pool level and rapid changes in tunnel flow rate because of extensive unsaturated storage capacity and high transmissivity within the mine complex. Thus, elimination of stream leakage could have a small effect on the annual discharge from the tunnel, but a large effect on peak discharge and associated water quality in streams.

  1. Thermal infrared remote sensing in assessing groundwater and surface-water resources related to Hannukainen mining development site, northern Finland

    Science.gov (United States)

    Rautio, Anne B.; Korkka-Niemi, Kirsti I.; Salonen, Veli-Pekka

    2018-02-01

    Mining development sites occasionally host complicated aquifer systems with notable connections to natural surface water (SW) bodies. A low-altitude thermal infrared (TIR) imaging survey was conducted to identify hydraulic connections between aquifers and rivers and to map spatial surface temperature patterns along the subarctic rivers in the proximity of the Hannukainen mining development area, northern Finland. In addition to TIR data, stable isotopic compositions ( δ 18O, δD) and dissolved silica concentrations were used as tracers to verify the observed groundwater (GW) discharge into the river system. Based on the TIR survey, notable GW discharge into the main river channel and its tributaries (61 km altogether) was observed and over 500 GW discharge sites were located. On the basis of the survey, the longitudinal temperature patterns of the studied rivers were found to be highly variable. Hydrological and hydrogeological information is crucial in planning and siting essential mining operations, such as tailing areas, in order to prevent any undesirable environmental impacts. The observed notable GW discharge was taken into consideration in the planning of the Hannukainen mining development area. The results of this study support the use of TIR imagery in GW-SW interaction and environmental studies in extensive and remote areas with special concerns for water-related issues but lacking the baseline research.

  2. Effects of Small-Scale Gold Mining on Surface and Ground Water ...

    African Journals Online (AJOL)

    / Prestea mining area in the Western Region of Ghana were conducted with the aim of assessing the possible effects of mining on water quality. Water samples were collected for 6 consecutive months at ten sampling sites within the study area ...

  3. Predicting events in the development of a coal surface mine in the west

    Science.gov (United States)

    Lynn M. Ferrante; Edward C. Thor

    1980-01-01

    Sudden changes in the level of coal mining activity in an area can cause immediate and profound changes in every facet of life in a rural community. Local officials and administrators of Federal and State governments often bear the brunt of responding to the disruptions that result from these changes. The nature of coal mining in the West is such that the community in...

  4. Use of barium-strontium carbonatite for flux welding and surfacing of mining machines

    Science.gov (United States)

    Kryukov, R. E.; Kozyrev, N. A.; Usoltsev, A. A.

    2017-09-01

    The results of application of barium-strontium carbonatite for modifying and refining iron-carbon alloys, used for welding and surfacing in ore mining and smelting industry, are generalized. The technology of manufacturing a flux additive containing 70 % of barium-strontium carbonatite and 30 % of liquid glass is proposed. Several compositions of welding fluxes based on silicomanganese slag were tested. The flux additive was introduced in an amount of 1, 3, 5 %. Technological features of welding with the application of the examined fluxes are determined. X-ray spectral analysis of the chemical composition of examined fluxes, slag crusts and weld metal was carried out, as well as metallographic investigations of welded joints. The principal possibility of applying barium-strontium carbonatite as a refining and gas-protective additive for welding fluxes is shown. The use of barium-strontium carbonatite reduces the contamination of the weld seam with nonmetallic inclusions: non-deforming silicates, spot oxides and brittle silicates, and increases the desulfurizing capacity of welding fluxes.

  5. Hydraulic Conductivity Modeling of Fractured Rock at Grasberg Surface Mine, Papua-Indonesia

    Directory of Open Access Journals (Sweden)

    Tedy Agung Cahyadi

    2017-04-01

    Full Text Available Packer tests and slug tests were conducted at 49 points at the Grasberg surface mine, Indonesia to obtain hydraulic conductivity data. The HC-system approach, which relies on rock quality designation, lithology permeability index, depth index, and gouge content designation, was applied. Geotechnical drill holes in 441 locations, consisting of 4,850 points of information, were used to determine the K values using the equation K = 2x10-6x HC0.5571. The K values, which were within the range of 10-8 and 10-5 m/s, were distributed into five alternative 3D distributions using Ordinary Kriging (OK and Artificial Neural Network (ANN. The result of the ANN modeling showed that some of the K values, with log K varying from -10.51 m/s to -3.09 m/s, were outside the range of the observed K values. The OK modeling results of K values, with log K varying from -8.12 m/s to -5.75 m/s, were within the range of the observed K values. The ANN modeled K values were slightly more varied than the OK modeled values. The result of an alternative OK modeling was chosen to represent the existing data population of flow media because it fits well to the geological conditions.

  6. Technology of surface wastewater purification, including high-rise construction areas

    Science.gov (United States)

    Tsyba, Anna; Skolubovich, Yury

    2018-03-01

    Despite on the improvements in the quality of high-rise construction areas and industrial wastewater treatment, the pollution of water bodies continues to increase. This is due to the organized and unorganized surface untreated sewage entry into the reservoirs. The qualitative analysis of some cities' surface sewage composition is carried out in the work. Based on the published literature review, the characteristic contamination present in surface wastewater was identified. The paper proposes a new technology for the treatment of surface sewage and presents the results of preliminary studies.

  7. Electron density in reasonably real metallic surfaces, including interchange and correlation effects

    International Nuclear Information System (INIS)

    Moraga, L.A.; Martinez, G.

    1981-01-01

    By means of a new method, the electron density in a jellium surface is calculated taking in account interchange and correlation effects; reproducing, in this way, the Lang and Kohn results. The new method is self-consistent but not iterative and hence is possible extend it to the solution of the same problem in more reasonably real metallic surfaces. (L.C.) [pt

  8. Min(d)ing the land: The relationship between artisanal and small-scale mining and surface land arrangements in the southern Philippines, eastern DRC and Liberia

    NARCIS (Netherlands)

    Verbrugge, B.L.P.; Cuvelier, J.; Bockstael, S. van

    2015-01-01

    This article examines the relationship between artisanal and small-scale mining (ASM) and surface land tenure arrangements, through a comparison of mining areas in the southern Philippines, the eastern DRC and Liberia. In all three cases, ASM takes place in peripheral regions outside central state

  9. Restoration of intact ground waters and surface waters in the post-mining landscape; Wiederherstellung intakter Grund- und Oberflaechengewaesser nach dem Braunkohlenbergbau

    Energy Technology Data Exchange (ETDEWEB)

    Merkel, Broder; Schipek, Mandy [Technische Univ. Bergakademie Freiberg (Germany); Scholz, Guenter; Rabe, Wolfgang; Clauss, Denny [MOVAB-D GmbH, Lauta (Germany)

    2011-12-15

    The restoration of the territories of former brown coal mining increasingly requires special efforts for the protection of affected ground waters and surface waters. With newly developed methods (the so-called inlake technology), recently various solutions to neutralize acidic mining lakes could be created. Simultaneously, this improves the water quality of adjacent aquifers at reasonable financial cost.

  10. Microwave effective surface impedance of structures including a high-Tc superconducting film

    International Nuclear Information System (INIS)

    Hartemann, P.

    1992-01-01

    The microwave effective surface impedances of different stacks made of high-temperature superconducting films, dielectric materials and bulk normal metals were computed. The calculations were based on the two-fluid model of superconductors and the conventional transmission line theory. These effective impedances are compared to the calculated intrinsic surface impedances of the stacked superconducting films. The considered superconducting material has been the oxide YBa 2 Cu 3 O 7 epitaxially grown on crystalline substrates (MgO, LaAlO 3 , SrTiO 3 ), the film thickness ranging from a few nm to 1μm. Discrepancies between the effective surface resistances or reactances and the corresponding intrinsic values were determined at 10 GHz for non resonant or resonant structures. At resonance the surface resistance discrepancy exhibits a sharp peak which reaches 10 4 or more in relative value according to the geometry and the used materials. Obviously the effective surface reactance shows also huge variations about the resonance and may be negative. Moreover geometries allowing to obtain an effective resistance smaller than the film intrinsic value have been found. The effects of the resonance phenomenon on the electromagnetic wave reflectivity and reflection phase shift are investigated. Therefore the reported theoretical results demonstrate that the effective surface impedance of YBCO films with a thickness smaller than 500 nm can be very different from the intrinsic film impedance according to the structures. (Author). 3 refs., 10 figs., 2 tabs

  11. Anthropogenic sources and environmentally relevant concentrations of heavy metals in surface water of a mining district in Ghana: a multivariate statistical approach.

    Science.gov (United States)

    Armah, Frederick A; Obiri, Samuel; Yawson, David O; Onumah, Edward E; Yengoh, Genesis T; Afrifa, Ernest K A; Odoi, Justice O

    2010-11-01

    The levels of heavy metals in surface water and their potential origin (natural and anthropogenic) were respectively determined and analysed for the Obuasi mining area in Ghana. Using Hawth's tool an extension in ArcGIS 9.2 software, a total of 48 water sample points in Obuasi and its environs were randomly selected for study. The magnitude of As, Cu, Mn, Fe, Pb, Hg, Zn and Cd in surface water from the sampling sites were measured by flame Atomic Absorption Spectrophotometry (AAS). Water quality parameters including conductivity, pH, total dissolved solids and turbidity were also evaluated. Principal component analysis and cluster analysis, coupled with correlation coefficient analysis, were used to identify possible sources of these heavy metals. Pearson correlation coefficients among total metal concentrations and selected water properties showed a number of strong associations. The results indicate that apart from tap water, surface water in Obuasi has elevated heavy metal concentrations, especially Hg, Pb, As, Cu and Cd, which are above the Ghana Environmental Protection Agency (GEPA) and World Health Organisation (WHO) permissible levels; clearly demonstrating anthropogenic impact. The mean heavy metal concentrations in surface water divided by the corresponding background values of surface water in Obuasi decrease in the order of Cd > Cu > As > Pb > Hg > Zn > Mn > Fe. The results also showed that Cu, Mn, Cd and Fe are largely responsible for the variations in the data, explaining 72% of total variance; while Pb, As and Hg explain only 18.7% of total variance. Three main sources of these heavy metals were identified. As originates from nature (oxidation of sulphide minerals particularly arsenopyrite-FeAsS). Pb derives from water carrying drainage from towns and mine machinery maintenance yards. Cd, Zn, Fe and Mn mainly emanate from industry sources. Hg mainly originates from artisanal small-scale mining. It cannot be said that the difference in concentration

  12. Simultaneous measurements of work function and H‒ density including caesiation of a converter surface

    Science.gov (United States)

    Cristofaro, S.; Friedl, R.; Fantz, U.

    2017-08-01

    Negative hydrogen ion sources rely on the surface conversion of neutral atomic hydrogen and positive hydrogen ions to H-. The efficiency of this process depends on the actual work function of the converter surface. By introducing caesium into the source the work function decreases, enhancing the negative ion yield. In order to study the impact of the work function on the H- surface production at similar conditions to the ones in ion sources for fusion devices like ITER and DEMO, fundamental investigations are performed in a flexible laboratory experiment. The work function of the converter surface can be absolutely measured by photoelectric effect, while a newly installed cavity ring-down spectroscopy system (CRDS) measures the H- density. The CRDS is firstly tested and characterized by investigations on H- volume production. Caesiation of a stainless steel sample is then performed in vacuum and the plasma effect on the Cs layer is investigated also for long plasma-on times. A minimum work function of (1.9±0.1) eV is reached after some minutes of plasma treatment, resulting in a reduction by a value of 0.8 eV compared to vacuum measurements. The H- density above the surface is (2.1±0.5)×1015 m-3. With further plasma exposure of the caesiated surface, the work function increases up to 3.75 eV, due to the impinging plasma particles which gradually remove the Cs layer. As a result, the H- density decreases by a factor of at least 2.

  13. Optimisation of reclamation approaches to land affected by surface coal mining

    Energy Technology Data Exchange (ETDEWEB)

    Kabrna, M.; Hendrychova, M. [Vyzkumny ustav pro hnede uhli a.s. (Czech Republic); Czech Univ. of Life Sciences, Prague (Czech Republic). Faculty of Environmental Science; Salek, M. [Czech Univ. of Life Sciences, Prague (Czech Republic). Faculty of Environmental Science; Rehor, M. [Vyzkumny ustav pro hnede uhli a.s. (Czech Republic)

    2009-07-01

    Since the 1950s, reclamation of land affected by brown coal mining in the Czech Republic has been conducted. Since this time, there has been significant improvement in quality development of reclamation measures. This paper discussed the results of different studies where technically reclaimed sites as well as naturally developed sites were investigated. The paper discussed the methodology of the study as well as results of succession versus reclamation and next preferences. One of the studies that was examined involved four groups of animals that have a close relation to soil and plant vegetation. These included ground beetles, bugs, molluscs, and birds. This study found that the spontaneously developed sites could be characterized by the same or a higher biodiversity than those technically reclaimed. The second study examined bird nest preferences either to domestic or to exotic trees. The results showed that although exotic trees dominate on reclaimed sites, the birds preferred the domestic trees for nesting. It was concluded that the natural succession could play a significant role within reclamation practices, particularly on those sites where higher species diversity is desirable. 10 refs., 2 figs.

  14. Mining (except Oil and Gas) Sector (NAICS 212)

    Science.gov (United States)

    EPA Regulatory and enforcement information for the mining sector, including metal mining & nonmetallic mineral mining and quarrying. Includes information about asbestos, coal mining, mountaintop mining, Clean Water Act section 404, and abandoned mine lands

  15. Assessment of post-mining damage

    Science.gov (United States)

    Gibesová, B.; Koudelková, J.; Mudruňka, J.; Vrublova, D.

    2017-10-01

    The article describes characteristic features of post-mining and mining activities. These includes drop basins, settling ponds with flotation tailings, mine water discharge into surface water, coal waste dumps and their thermic activities. In conclusion, the financial demands oi individual remediation and reclamation activities are quantified. The costs of land reclamation measures with respect to the subsequent use of the landscape are also calculated for the Ostrava-Karvina Coal District.

  16. Groundwater Surface Water Interactions in a Gold-Mined Dredged Floodplain of the Merced River

    Science.gov (United States)

    Sullivan, L.; Conklin, M. H.; Ghezzehei, T. A.

    2012-12-01

    The Merced River, originating in the Sierra Nevada, California, drains a watershed with an area of ~3,305 km2. Merced River has been highly altered due to diversions, mechanically dredged mining, and damming. A year of groundwater-surface water interactions were studied to elucidate the hydrological connection between the Main Canal, an unlined canal that contains Merced River water flows parallel to the river with an average elevation of 89m, the highly conductive previously dredged floodplain, and the Merced River with an average elevation of 84m. Upstream of the study reach, located in an undredged portion, of the floodplain are two fish farms that have been operating for approximately 40 years. This study reach has been historically important for salmon spawning and rearing, where more than 50% of the Chinook salmon of the Merced River spawn. Currently salmon restoration is focusing gravel augmentation and adding side channel and ignoring groundwater influences. Exchanges between the hyporheic and surrounding surface, groundwater, riparian, and alluvial floodplain habitats occur over a wide range of spatial and temporal scales. Pressure transducers were installed in seven wells and four ponds located in the dredged floodplain. All wells were drilled to the Mehrten Formation, a confining layer, and screened for last 3m. These groundwater well water levels as well as the surface water elevations of the Main Canal and the Merced River were used to determine the direction of sublateral surface flows using Groundwater Vistas as a user interface for MODFLOW. The well and pond waters and seepage from the river banks were sampled for anion/cation, dissolved organic carbon, total nitrogen, total iron, and total dissolved iron concentrations to determine water sources and the possibility of suboxic water. Field analysis indicated that water in all wells and ponds exhibit low dissolved oxygen, high conductivity rates, and oxidation/reduction potentials that switched from

  17. Surface wave site characterization at 27 locations near Boston, Massachusetts, including 2 strong-motion stations

    Science.gov (United States)

    Thompson, Eric M.; Carkin, Bradley A.; Baise, Laurie G.; Kayen, Robert E.

    2014-01-01

    The geotechnical properties of the soils in and around Boston, Massachusetts, have been extensively studied. This is partly due to the importance of the Boston Blue Clay and the extent of landfill in the Boston area. Although New England is not a region that is typically associated with seismic hazards, there have been several historical earthquakes that have caused significant ground shaking (for example, see Street and Lacroix, 1979; Ebel, 1996; Ebel, 2006). The possibility of strong ground shaking, along with heightened vulnerability from unreinforced masonry buildings, motivates further investigation of seismic hazards throughout New England. Important studies that are pertinent to seismic hazards in New England include source-parameter studies (Somerville and others, 1987; Boore and others, 2010), wave-propagation studies (Frankel, 1991; Viegas and others, 2010), empirical ground-motion prediction equations (GMPE) for computing ground-motion intensity (Tavakoli and Pezeshk, 2005; Atkinson and Boore, 2006), site-response studies (Hayles and others, 2001; Ebel and Kim, 2006), and liquefaction studies (Brankman and Baise, 2008). The shear-wave velocity (VS) profiles collected for this report are pertinent to the GMPE, site response, and liquefaction aspects of seismic hazards in the greater Boston area. Besides the application of these data for the Boston region, the data may be applicable throughout New England, through correlations with geologic units (similar to Ebel and Kim, 2006) or correlations with topographic slope (Wald and Allen, 2007), because few VS measurements are available in stable tectonic regions.Ebel and Hart (2001) used felt earthquake reports to infer amplification patterns throughout the greater Boston region and noted spatial correspondence with the dominant period and amplification factors obtained from ambient noise (horizontal-to-vertical ratios) by Kummer (1998). Britton (2003) compiled geotechnical borings in the area and produced a

  18. Evaluating the Use of Tree Shelters for Direct Seeding of Castanea on a Surface Mine in Appalachia

    Directory of Open Access Journals (Sweden)

    Christopher Barton

    2015-10-01

    Full Text Available American chestnut (Castanea dentata, once a primary constituent of the eastern hardwood forest ecosystem, was nearly extirpated from the forest canopy by the accidental introduction of chestnut blight (Cryphonectria parasitica. An intensive breeding program has sought to breed blight resistance from Chinese chestnut into American chestnuts, while maintaining as much of the desirable American chestnut phenotypes as possible. Previous studies suggest that these blight resistant American chestnuts, termed “restoration chestnuts”, are capable of thriving on reclaimed surface mines. We direct seeded pure Chinese, pure American, and three backcross lines into brown sandstone minesoil on a mine site in Pike County, KY. To investigate the effects of tree sheltering on survival and growth, we installed tree shelters on half the plots, and left the rest of the plots unsheltered. Results indicated that shelters were highly effective at reducing initial mortality. In addition, while pure Chinese chestnut survival was highest, the three backcross lines have also survived well on this site. Our study demonstrates that American, Chinese, and backcrossed chestnuts can survive through five growing seasons on reclaimed surface mines with the use of tree shelters.

  19. Effects of surface coal mining and reclamation on the geohydrology of six small watersheds in west-central Indiana. Chapter B

    International Nuclear Information System (INIS)

    Martin, J.D.; Duwelius, R.F.; Crawford, C.G.

    1990-01-01

    Coal has been and will continue to be a major source of energy in the United States for the foreseeable future. Surface mining is presently the most efficient method of extracting coal. The mining practice, however, usually has a detrimental effect on the environment by altering topography and ecologic systems. Surface coal mining also can degrade surface- and ground-water quality and quantity. The U.S. Geological Survey began a study in 1979 to identify changes in the quantity of surface- and ground-water resources caused by surface coal mining in Indiana. As part of the study, six small watersheds in west-central Indiana were instrumented for the collection of hydrologic and meteorologic data. The Water-Supply Paper comprises two reports resulting from the investigation. The physical environment and coal mining history of west-central Indiana and the six small watersheds selected for intensive study are described in chapter A. The surface- and ground-water systems of each of the small watersheds and the hydrologic effects of coal mining and reclamation are described in chapter B

  20. Mining Pribram in science and technology

    International Nuclear Information System (INIS)

    1984-01-01

    The Geomechanics session of the Symposium ''Mining Pribram in Science and Technology'' held from October 15 to 20, 1984 heard a total of 18 papers dealing with the effects of exploitation on the stability of the surrounding massif and surface, the protection of surface and deep mines, geophysical surveying, the measurement of deformations caUsed by undermining, the mathematical modelling of surface deformation and various measuring methods and methods of interpreting measured results. 4 papers are included into INIS. (B.S.)

  1. On the modelling of semi-insulating GaAs including surface tension and bulk stresses

    Energy Technology Data Exchange (ETDEWEB)

    Dreyer, W.; Duderstadt, F.

    2004-07-01

    Necessary heat treatment of single crystal semi-insulating Gallium Arsenide (GaAs), which is deployed in micro- and opto- electronic devices, generate undesirable liquid precipitates in the solid phase. The appearance of precipitates is influenced by surface tension at the liquid/solid interface and deviatoric stresses in the solid. The central quantity for the description of the various aspects of phase transitions is the chemical potential, which can be additively decomposed into a chemical and a mechanical part. In particular the calculation of the mechanical part of the chemical potential is of crucial importance. We determine the chemical potential in the framework of the St. Venant-Kirchhoff law which gives an appropriate stress/strain relation for many solids in the small strain regime. We establish criteria, which allow the correct replacement of the St. Venant-Kirchhoff law by the simpler Hooke law. The main objectives of this study are: (i) We develop a thermo-mechanical model that describes diffusion and interface motion, which both are strongly influenced by surface tension effects and deviatoric stresses. (ii) We give an overview and outlook on problems that can be posed and solved within the framework of the model. (iii) We calculate non-standard phase diagrams, i.e. those that take into account surface tension and non-deviatoric stresses, for GaAs above 786 C, and we compare the results with classical phase diagrams without these phenomena. (orig.)

  2. Unexpected hydrologic perturbation in an abandoned underground coal mine: Response to surface reclamation?

    Science.gov (United States)

    Harper, D.; Olyphant, G.A.; Hartke, E.J.

    1990-01-01

    A reclamation project at the abandoned Blackhawk Mine site near Terre Haute, Indiana, lasted about four months and involved the burial of coarse mine refuse in shallow (less than 9 m) pits excavated into loess and till in an area of about 16 ha. An abandoned flooded underground coal mine underlies the reclamation site at a depth of about 38 m; the total area underlain by the mine is about 10 km2. The potentiometric levels associated with the mine indicate a significant (2.7 m) and prolonged perturbation of the deeper confined groundwater system; 14 months after completing reclamation, the levels began to rise linearly (at an average rate of 0.85 cm/d) for 11 months, then fell exponentially for 25 months, and are now nearly stable. Prominent subsidence features exist near the reclamation site. Subsidence-related fractures were observed in cores from the site, and such fractures may have provided a connection between the shallower and deeper groundwater systems. ?? 1990 Springer-Verlag New York Inc.

  3. Impact assessment of mine drainage water and municipal wastewater on the surface water in the vicinity of Bor

    Directory of Open Access Journals (Sweden)

    Gardić Vojka R.

    2015-01-01

    Full Text Available Mining and copper production in Bor, in the past hundred years, had a huge impact on the environment of town, but also in a wide region. In the area of Bor, in the zone of Mining and Smelting Company (RTB activity, over 29,000 ha of land under forests and fields is degraded. The area of degraded agricultural land in the Bor municipality is over 60% of total agricultural land. Wastewater, generated in the sites of RTB Bor, pollute the Bor River and Krivelj River, which still flow into the Timok River and Danube River. These pollutions are often presented by low pH value, increased content of heavy metal ions, suspended particles and fine particles of flotation tailings, which is deposited in the valleys of these rivers on the area of over 2000 hectares. During the decades of exploitation of ore from the open pit Bor at different locations ("Visoki Planir" - also called “Oštreljski planir”, "Severni planir" dump of ore body "H" (RTH gangue and tailings were delayed. The largest amount of tailings, about 150 million tons, was postponed on location Visoki planir. The effect of the mining waste and the impact of the whole process of processing copper ore to the final products on the environment, was conducted during the 4th study period of the project "Management of mining waste-tailing dump in the Bor region," supported by the Japan Society for the Promotion Science (Eng. Japan Society for the Promotion of Science and the Japan international cooperation Agency and the Ministry of environment, Mining and Spatial planning of the Republic of Serbia. Influence of season on the level of pollutants in soil and water, the impact on water quality in the river Timok and the River Danube, was conducted during first three periods of project. This paper presents the results of the third study period. The third period of research, which was conducted over a period of 17. 10. 2012 to 17. 01.2013 year, included a review of pollution sources and define their

  4. Effects of potential surface coal mining on dissolved solids in Otter Creek and in the Otter Creek alluvial aquifer, southeastern Montana

    Science.gov (United States)

    Cannon, M.R.

    1985-01-01

    Otter Creek drains an area of 709 square miles in the coal-rich Powder River structural basin of southeastern Montana. The Knobloch coal beds in the Tongue River Member of the Paleocene Fort Union Formation is a shallow aquifer and a target for future surface mining in the downstream part of the Otter Creek basin. A mass-balance model was used to estimate the effects of potential mining on the dissolved solids concentration in Otter Creek and in the alluvial aquifer in the Otter Creek valley. With extensive mining of the Knobloch coal beds, the annual load of dissolved solids to Otter Creek at Ashland at median streamflow could increase by 2,873 tons, or a 32-percent increase compared to the annual pre-mining load. Increased monthly loads of Otter Creek, at the median streamflow, could range from 15 percent in February to 208 percent in August. The post-mining dissolved solids load to the subirrigated part of the alluvial valley could increase by 71 percent. The median dissolved solids concentration in the subirrigated part of the valley could be 4,430 milligrams per liter, compared to the pre-mining median concentration of 2,590 milligrams per liter. Post-mining loads from the potentially mined landscape were calculated using saturated-paste-extract data from 506 overburdened samples collected from 26 wells and test holes. Post-mining loads to the Otter Creek valley likely would continue at increased rates for hundreds of years after mining. If the actual area of Knobloch coal disturbed by mining were less than that used in the model, post-mining loads to the Otter Creek valley would be proportionally smaller. (USGS)

  5. Investigating uranium distribution in surface sediments and waters: a case study of contamination from the Juniper Uranium Mine, Stanislaus National Forest, CA.

    Science.gov (United States)

    Kayzar, Theresa M; Villa, Adam C; Lobaugh, Megan L; Gaffney, Amy M; Williams, Ross W

    2014-10-01

    The uranium concentrations and isotopic compositions of waters, sediment leachates and sediments from Red Rock Creek in the Stanislaus National Forest of California were measured to investigate the transport of uranium from a point source (the Juniper Uranium Mine) to a natural surface stream environment. The ((234)U)/((238)U) composition of Red Rock Creek is altered downstream of the Juniper Mine. As a result of mine-derived contamination, water ((234)U)/((238)U) ratios are 67% lower than in water upstream of the mine (1.114-1.127 ± 0.009 in the contaminated waters versus 1.676 in the clean branch of the stream), and sediment samples have activity ratios in equilibrium in the clean creek and out of equilibrium in the contaminated creek (1.041-1.102 ± 0.007). Uranium concentrations in water, sediment and sediment leachates are highest downstream of the mine, but decrease rapidly after mixing with the clean branch of the stream. Uranium content and compositions of the contaminated creek headwaters relative to the mine tailings of the Juniper Mine suggest that uranium has been weathered from the mine and deposited in the creek. The distribution of uranium between sediment surfaces (leachable fraction) and bulk sediment suggests that adsorption is a key element of transfer along the creek. In clean creek samples, uranium is concentrated in the sediment residues, whereas in the contaminated creek, uranium is concentrated on the sediment surfaces (∼70-80% of uranium in leachable fraction). Contamination only exceeds the EPA maximum contaminant level (MCL) for drinking water in the sample with the closest proximity to the mine. Isotopic characterization of the uranium in this system coupled with concentration measurements suggest that the current state of contamination in Red Rock Creek is best described by mixing between the clean creek and contaminated upper branch of Red Rock Creek rather than mixing directly with mine sediment. Published by Elsevier Ltd.

  6. 30 CFR 77.1200 - Mine map.

    Science.gov (United States)

    2010-07-01

    ... Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF LABOR COAL MINE SAFETY AND HEALTH MANDATORY SAFETY STANDARDS, SURFACE COAL MINES AND SURFACE WORK AREAS OF UNDERGROUND COAL MINES Maps § 77.1200 Mine... boundary lines of the active areas of the mine; (c) Contour lines passing through whole number elevations...

  7. Economics of mine water treatment

    OpenAIRE

    Dvořáček, Jaroslav; Vidlář, Jiří; Štěrba, Jiří; Heviánková, Silvie; Vaněk, Michal; Barták, Pavel

    2012-01-01

    Mine water poses a significant problem in lignite coal mining. The drainage of mine water is the fundamental prerequisite of mining operations. Under the legislation of the Czech Republic, mine water that discharges into surface watercourse is subject to the permission of the state administration body in the water management sector. The permission also stipulates the limits for mine water pollution. Therefore, mine water has to be purified prior to discharge. Although all...

  8. 30 CFR 785.19 - Surface coal mining and reclamation operations on areas or adjacent to areas including alluvial...

    Science.gov (United States)

    2010-07-01

    ...— (A) The existence of current flood irrigation in the area in question; (B) The capability of an area... flood irrigation, streamflow, water quality, soils, and topography; or (C) Subirrigation of the lands in... after the complete application is evaluated. (2) An applicant need not submit the information required...

  9. Determining surface wave attenuation by modeling surface wave amplitudes including finite-frequency focusing and defocusing effects

    Science.gov (United States)

    Ma, Z.; Masters, G.

    2011-12-01

    We have developed a technique that uses cluster analysis method to efficiently measure Rayleigh wave phase and amplitude anomalies. Amplitude anomaly measurements have been made on the vertical components of all permanent stations recording LHZ data from IRIS. We currently consider earthquakes with Ms>5.5 between 1990 and 2004 and correct for source phase and magnitude according to the CMT. This technique leads to a large set of amplitude measurements at 7mHz, 10mHz, 15mHz and 20mHz. We discard data with erroneously large amplitude anomalies (|dlnA|>1) and inconsistent instrument responses and we only use earthquakes recorded by more than 30 stations. Out of about 250000 raw measurements for each frequency, about 140000 measurements are retained for inverting for attenuation structure. Similar to Dalton and Ekstrom (2006), phase and amplitude data are inverted together for phase velocity maps, attenuation maps, and source and receiver terms. However, we use the 2D finite frequency amplitude kernel of Zhou et al, (2004) to model the focusing-defocusing effects. Ray theory, which has been used to date, gives amplitude anomaly predictions which depend strongly on short wavelength structure and so are very sensitive to how phase velocity maps are smoothed. Our resulting attenuation maps show structures correlating well with surface tectonics, with high attenuation in regions of ridges, back-arc basins and western North America, and low attenuation in stable continental shields. The success of getting reasonable attenuation structures demonstrates the feasibility of applying 2D finite frequency amplitude kernel to real data.

  10. The use of geographical information system (GIS) technology in surface mine reclamation monitoring

    International Nuclear Information System (INIS)

    Dixon, C.

    1999-01-01

    The use of a Geographic Information System (GIS) and related technologies (e.g., Digital cartographic tools, satellite image processing systems) can benefit the planning and monitoring of open-pit mine reclamation activities. PCI Geomatics, in conjunction with Luscar Limited's Line Creek Mine, has developed a GIS-based system designed to store information relevant to planning and assessing reclamation progress. Data that existed in various formats throughout the company, and which had been collected since the mine-planning phase, was integrated into the GIS. The system is used to summarize current reclamation activities and is linked to corporate costing procedures. Monitoring of reclamation activities and quantifying change in the mine area is easily done using the spatial analysis capabilities of the GIS. Assessments of the change in reclamation areas are enhanced by using satellite image data to produce inexpensive and timely information on the land base, and allow the comparison of the health of the vegetation to reclamation areas from year to year. The implemented system substantially reduces the time needed to generate statistics and produce maps for government or internal reports. Also, there are benefits in terms of both cost and effectiveness of reclamation planning

  11. Bioassessment of heavy metals in the surface soil layer of an opencast mine aimed for its rehabilitation.

    Science.gov (United States)

    Ličina, Vlado; Akšić, Milica Fotirić; Tomić, Zorica; Trajković, Ivana; Antić Mladenović, Svetlana; Marjanović, Milena; Rinklebe, Jörg

    2017-01-15

    The contemporary reclamation method in an opencast coal mine closure comprises the use of the preserved surface soil layer (SSL) before mining, and can be directly returned to the areas being rehabilitated. The present study emphasizes a risk in the use of such a SSL in mine rehabilitation due to the possible excessive amount of heavy metals which usually derives from a metal-rich sediment or fluvial character of overburden material. This indication was approved by the bioassessment of cadmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn) in root and aerial parts of maize (Zea mays), alfalfa (Medicago sativa), sweet clover (Melilotus officinalis), wheat (Triticum aestivum), barley (Hordeum sativum), white clover (Trifolium repens), pasture (Poales sp.), tomato (Solanum lycopersicum), potato (Solanum tuberosum) and carrot (Daucus carota) grown on SSL in the opencast mine area. The fluvial layers of the investigated mine SSL revealed the excessive existence of Ni and Cr, probably of geogenic origin, according to the X-ray diffraction (XRD) which detected Ni- and Cr-bearing minerals in soil fractions. In addition, the highest residual fraction of these two heavy metals, obtained by sequential extraction analyses, together with all other tested soil parameters, supported this assumption. Nevertheless, the accumulations of Cr in tomato fruit (2.93 mg kg -1 ), potato tuber (5.89 mg kg -1 ) and carrot root (7.35 mg kg -1 ) grown on the investigated SSL were found to exceed a critical level of this element for human nutrition. However, despite the evident excess of Ni in the investigated SSL, a similar trend was not found in edible part of plants. The transfer and mobility of the investigated metals was evaluated using the accumulation factor (AF < 1.0) where the root were the preferential organ for the storage of heavy metals. This investigation could bring an important input for its acceptability of use in soil restoration

  12. Corrective Action Investigation Plan for Corrective Action Unit 527: Horn Silver Mine, Nevada Test Site, Nevada: Revision 1 (Including Records of Technical Change No.1, 2, 3, and 4)

    Energy Technology Data Exchange (ETDEWEB)

    U.S. Department of Energy, National Nuclear Security Administration Nevada Operations Office

    2002-12-06

    This Corrective Action Investigation Plan contains the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Operations Office's approach to collect the data necessary to evaluate corrective action alternatives appropriate for the closure of Corrective Action Unit (CAU) 527, Horn Silver Mine, Nevada Test Site, Nevada, under the Federal Facility Agreement and Consent Order. Corrective Action Unit 527 consists of one Corrective Action Site (CAS): 26-20-01, Contaminated Waste Dump No.1. The site is located in an abandoned mine site in Area 26 (which is the most arid part of the NTS) approximately 65 miles northwest of Las Vegas. Historical documents may refer to this site as CAU 168, CWD-1, the Wingfield mine (or shaft), and the Wahmonie mine (or shaft). Historical documentation indicates that between 1959 and the 1970s, nonliquid classified material and unclassified waste was placed in the Horn Silver Mine's shaft. Some of the waste is known to be radioactive. Documentation indicates that the waste is present from 150 feet to the bottom of the mine (500 ft below ground surface). This CAU is being investigated because hazardous constituents migrating from materials and/or wastes disposed of in the Horn Silver Mine may pose a threat to human health and the environment as well as to assess the potential impacts associated with any potential releases from the waste. The results of this field investigation will support a defensible evaluation of corrective action alternatives in the corrective action decision document.

  13. Determination of granite rock massif weathering and cracking of surface layers in the oldest parts of medieval mine depending on used mining method

    Czech Academy of Sciences Publication Activity Database

    Lednická, Markéta; Kaláb, Zdeněk

    2016-01-01

    Roč. 61, č. 2 (2016), s. 381-395 ISSN 0860-7001 R&D Projects: GA MŠk(CZ) LO1406; GA MŠk ED2.1.00/03.0082 Institutional support: RVO:68145535 Keywords : Jeroným Mine * non-destructive testing * granite Subject RIV: DH - Mining, incl. Coal Mining Impact factor: 0.550, year: 2016 http://archiwum.img-pan.krakow.pl/index.php/AMS/article/view/785/692

  14. Natural radionuclides in fish species from surface water of Bagjata and Banduhurang uranium mining areas, East Singhbhum, Jharkhand, India.

    Science.gov (United States)

    Giri, Soma; Singh, Gurdeep; Jha, V N; Tripathi, R M

    2010-11-01

    To study the natural radionuclides in the freshwater fish samples around the uranium mining areas of Bagjata and Banduhurang, East Singhbhum, Jharkhand, India. The naturally occurring radioisotopes of uranium, U(nat), consisting of (234)U, (235)U and (238)U; (226)Ra, (230)Th and (210)Po were analysed in the fish samples from the surface water of Bagjata and Banduhurang mining areas after acid digestion. The ingestion dose, concentration factor and excess lifetime cancer risk of the radionuclides were estimated. The geometric mean activity of U(nat), (226)Ra, (230)Th and (210)Po in the fish samples was found to be 0.05, 0.19, 0.29 and 0.95 Bq kg(-1)(fresh) (Becquerel per kilogram fresh fish), respectively, in the Bagjata mining area, while for Banduhurang mining area it was estimated to be 0.08, 0.41, 0.22 and 2.48 Bq kg(-1)(fresh), respectively. The ingestion dose was computed to be 1.88 and 4.16 μSvY(-1), respectively, for both the areas which is much below the 1 mSv limit set in the new International Commission on Radiological Protection (ICRP) recommendations. The estimation of the Concentration Factors (CF) reveal that the CF from water is greater than 1 l/kg(-1)in most of the cases while from sediment CF is less than 1. The excess individual lifetime cancer risk due to the consumption of fish was calculated to be 2.53 × 10(-5) and 6.48 × 10(-5), respectively, for Bagjata and Banduhurang areas, which is within the acceptable excess individual lifetime cancer risk value of 1 × 10(-4). The study confirms that current levels of radioactivity do not pose a significant radiological risk to freshwater fish consumers.

  15. Hydrogeochemical processes governing the origin, transport and fate of major and trace elements from mine wastes and mineralized rock to surface waters

    Science.gov (United States)

    Nordstrom, D. Kirk

    2011-01-01

    The formation of acid mine drainage from metals extraction or natural acid rock drainage and its mixing with surface waters is a complex process that depends on petrology and mineralogy, structural geology, geomorphology, surface-water hydrology, hydrogeology, climatology, microbiology, chemistry, and mining and mineral processing history. The concentrations of metals, metalloids, acidity, alkalinity, Cl-, F- and SO42- found in receiving streams, rivers, and lakes are affected by all of these factors and their interactions. Remediation of mine sites is an engineering concern but to design a remediation plan without understanding the hydrogeochemical processes of contaminant mobilization can lead to ineffective and excessively costly remediation. Furthermore, remediation needs a goal commensurate with natural background conditions rather than water-quality standards that might bear little relation to conditions of a highly mineralized terrain. This paper reviews hydrogeochemical generalizations, primarily from US Geological Survey research, that enhance our understanding of the origin, transport, and fate of contaminants released from mined and mineralized areas.

  16. Predictive modelling of the mine water rebound in an old abandoned Dongwon mine in Korea

    Science.gov (United States)

    Baek, Hwanjo; Kim, Daehoon; Park, Seunghwan; Kim, Gyoungman

    2014-05-01

    The closure of over three-hundred deep coal mines in Korea since the late-1980s, primarily due to the energy and environmental concerns, has produced significant side effects. One of the major challenges is to assess the risk from mine water rebound to overlying aquifers and surface waters, which can produce significant environmental hazards. Some numerical models such as VSS-NET, GRAM and MODFLOW have been developed to predict the quantity, timing and location of discharges resulting from mine water rebound. In this study, we developed a GRAM-based windows program for mine water rebound modelling in abandoned deep mine systems. The program consists of the simulation engine and the GUI modules, each has several subroutines. Changes in mine water level of the Dongwon coal mine, presumably hydrogeologically connected to nearby old abandoned mines, has been monitored after the mine was finally closed in 2005. The water level in the vertical shaft rised up to 420m during the period of 3 years. The system was modelled as two ponds connected by a pipe. Input data include the areas of each pond, catchment areas, the storage coefficient, etc. The predicted changes in the mine water level was very similar to the observed data in the field. For this modelling, in fact, some of the input variable were roughly assumed to match the field data. Nevertheless, this program can be effectively applied to predict the rising of the mine water after the mine closure.

  17. Assessment of Radioactive Materials and Heavy Metals in the Surface Soil around the Bayanwula Prospective Uranium Mining Area in China.

    Science.gov (United States)

    Bai, Haribala; Hu, Bitao; Wang, Chengguo; Bao, Shanhu; Sai, Gerilemandahu; Xu, Xiao; Zhang, Shuai; Li, Yuhong

    2017-03-14

    The present work is the first systematic and large scale study on radioactive materials and heavy metals in surface soil around the Bayanwula prospective uranium mining area in China. In this work, both natural and anthropogenic radionuclides and heavy metals in 48 surface soil samples were analyzed using High Purity Germanium (HPGe) γ spectrometry and inductively coupled plasma-mass spectrometry (ICP-MS). The obtained mean activity concentrations of 238 U, 226 Ra, 232 Th, 40 K, and 137 Cs were 25.81 ± 9.58, 24.85 ± 2.77, 29.40 ± 3.14, 923.0 ± 47.2, and 5.64 ± 4.56 Bq/kg, respectively. The estimated average absorbed dose rate and annual effective dose rate were 76.7 ± 3.1 nGy/h and 83.1 ± 3.8 μ Sv, respectively. The radium equivalent activity, external hazard index, and internal hazard index were also calculated, and their mean values were within the acceptable limits. The estimated lifetime cancer risk was 3.2 × 10 -4 /Sv. The heavy metal contents of Cr, Ni, Cu, Zn, As, Cd, and Pb from the surface soil samples were measured and their health risks were then assessed. The concentrations of all heavy metals were much lower than the average backgrounds in China except for lead which was about three times higher than that of China's mean. The non-cancer and cancer risks from the heavy metals were estimated, which are all within the acceptable ranges. In addition, the correlations between the radionuclides and the heavy metals in surface soil samples were determined by the Pearson linear coefficient. Strong positive correlations between radionuclides and the heavy metals at the 0.01 significance level were found. In conclusion, the contents of radionuclides and heavy metals in surface soil around the Bayanwula prospective uranium mining area are at a normal level.

  18. Beyond nutrient-based food indices: a data mining approach to search for a quantitative holistic index reflecting the degree of food processing and including physicochemical properties.

    Science.gov (United States)

    Fardet, Anthony; Lakhssassi, Sanaé; Briffaz, Aurélien

    2018-01-24

    Processing has major impacts on both the structure and composition of food and hence on nutritional value. In particular, high consumption of ultra-processed foods (UPFs) is associated with increased risks of obesity and diabetes. Unfortunately, existing food indices only focus on food nutritional content while failing to consider either food structure or the degree of processing. The objectives of this study were thus to link non-nutrient food characteristics (texture, water activity (a w ), glycemic and satiety potentials (FF), and shelf life) to the degree of processing; search for associations between these characteristics with nutritional composition; search for a holistic quantitative technological index; and determine quantitative rules for a food to be defined as UPF using data mining. Among the 280 most widely consumed foods by the elderly in France, 139 solid/semi-solid foods were selected for textural and a w measurements, and classified according to three degrees of processing. Our results showed that minimally-processed foods were less hyperglycemic, more satiating, had better nutrient profile, higher a w , shorter shelf life, lower maximum stress, and higher energy at break than UPFs. Based on 72 food variables, multivariate analyses differentiated foods according to their degree of processing. Then technological indices including food nutritional composition, a w , FF and textural parameters were tested against technological groups. Finally, a LIM score (nutrients to limit) ≥8 per 100 kcal and a number of ingredients/additives >4 are relevant, but not sufficient, rules to define UPFs. We therefore suggest that food health potential should be first defined by its degree of processing.

  19. Adhesion characterization of tungsten mine waste geopolymeric binder. Influence of OPC concrete substance surface treatment

    OpenAIRE

    Torgal, Fernando Pacheco; Gomes, J. P. Castro; Jalali, Said

    2008-01-01

    Tungsten mine waste mud (TMWM) was investigated for its potential use as repair material of ordinary portland cement (OPC) concrete. Bond strength between OPC concrete substrate and three repair materials was analysed. TMWM geopolymeric binder and two commercial repair products were used as repair materials. Bond strength behaviour was assessed from slant shear tests. A total of 128 slant shear specimens were made in order to evaluate bond strength at 1, 3, 7 and 28 days curing. Four ki...

  20. Distribution of natural radionuclides in surface soils in the vicinity of abandoned uranium mines in Serbia.

    Science.gov (United States)

    Momčilović, Milan; Kovačević, Jovan; Tanić, Milan; Dorđević, Milan; Bačić, Goran; Dragović, Snežana

    2013-02-01

    The activity concentrations of natural radionuclides in soils from the area affected by uranium mining at Stara Planina Mountain in Serbia were studied and compared with the results obtained from an area with no mining activities (background area). In the affected area, the activity concentrations ranged from 1.75 to 19.2 mg kg(-1) for uranium and from 1.57 to 26.9 mg kg(-1) for thorium which is several-fold higher than those in the background area. The Th/U, K/U, and K/Th activity ratios were also determined and compared with data from similar studies worldwide. External gamma dose rate in the air due to uranium, thorium, and potassium at 1 m above ground level in the area affected by uranium mining was found to be 91.3 nGy h(-1), i.e., about two-fold higher than that in background area. The results of this preliminary study indicate the importance of radiological evaluation of the area and implementation of remedial measures in order to prevent further dispersion of radionuclides in the environment.

  1. Grasshopper sparrow reproductive success and habitat use on reclaimed surface mines varies by age of reclamation

    Science.gov (United States)

    Wood, Petra; Ammer, Frank K.

    2015-01-01

    We studied 3 mountaintop mining–valley fill (MTMVF) complexes in southern West Virginia, USA to examine grasshopper sparrow (Ammodramus savannarum pratensis) demographic response to different age classes of mine land reclamation. For 71 nests monitored during the 2001–2002 breeding seasons, overall nest success (36%) was within the range of nest success rates previously reported for this species, but it was highest on more recently reclaimed sites (56%). Nest density and clutch size did not differ (P > 0.30) among reclamation age classes, whereas number of fledglings was greater (P = 0.01) on more recently reclaimed sites. We measured vegetation variables at 70 nest subplots and at 96 systematic subplots to compare nest vegetation with vegetation available on the plots. We found that nests occurred in areas with more bare ground near the nest, greater vegetation height–density surrounding the nest site, lower grass height, and fewer woody stems, similar to previous studies. As postreclamation age increased, vegetation height–density and maximum grass height increased, and sericea (Lespedeza cuneata) became more dominant. Nest success declined with increasing vegetation height–density at the nest. The grasslands available on these reclaimed mine complexes are of sufficient quality to support breeding populations of grasshopper sparrows, but nest success decreased on the older reclaimed areas. Without active management, grasslands on reclaimed MTMVF mines become less suitable for nesting grasshopper sparrows about 10 years after reclamation.

  2. Expansion Hamiltonian model for a diatomic molecule adsorbed on a surface: Vibrational states of the CO/Cu(100) system including surface vibrations

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Qingyong, E-mail: mengqingyong@dicp.ac.cn [State Key Laboratory of Molecular Reaction Dynamics, Dalian Institute of Chemical Physics, Chinese Academy of Sciences, Zhongshan Road 457, 116023 Dalian (China); Meyer, Hans-Dieter, E-mail: hans-dieter.meyer@pci.uni-heidelberg.de [Theoretische Chemie, Physikalisch-Chemisches Institut, Ruprecht-Karls Universität Heidelberg, Im Neuenheimer Feld 229, D-69120 Heidelberg (Germany)

    2015-10-28

    Molecular-surface studies are often done by assuming a corrugated, static (i.e., rigid) surface. To be able to investigate the effects that vibrations of surface atoms may have on spectra and cross sections, an expansion Hamiltonian model is proposed on the basis of the recently reported [R. Marquardt et al., J. Chem. Phys. 132, 074108 (2010)] SAP potential energy surface (PES), which was built for the CO/Cu(100) system with a rigid surface. In contrast to other molecule-surface coupling models, such as the modified surface oscillator model, the coupling between the adsorbed molecule and the surface atoms is already included in the present expansion SAP-PES model, in which a Taylor expansion around the equilibrium positions of the surface atoms is performed. To test the quality of the Taylor expansion, a direct model, that is avoiding the expansion, is also studied. The latter, however, requests that there is only one movable surface atom included. On the basis of the present expansion and direct models, the effects of a moving top copper atom (the one to which CO is bound) on the energy levels of a bound CO/Cu(100) system are studied. For this purpose, the multiconfiguration time-dependent Hartree calculations are carried out to obtain the vibrational fundamentals and overtones of the CO/Cu(100) system including a movable top copper atom. In order to interpret the results, a simple model consisting of two coupled harmonic oscillators is introduced. From these calculations, the vibrational levels of the CO/Cu(100) system as function of the frequency of the top copper atom are discussed.

  3. Installation of a permeable reactive barrier at the mining complex facility in Los Gigantes - Cordoba : Monitoring plan of surface and underground water

    International Nuclear Information System (INIS)

    Grande Cobian, Juan D.; Sanchez Proano, Paula; Cicerone, Daniel S.

    2009-01-01

    The Argentine National Atomic Energy Commission declares under its Environmental policy the commitment to restore those sites where activities concerning Uranium mining were developed. It makes it beyond the scope of the Project of Environmental Restitution of the Uranium Mining (PRAMU from its Spanish abbreviation). The Chemistry of Water and Soil Division at the Environmental Chemistry and Energy Generation Department belonging to the Chemistry Management Office assist the PRAMU on the installation of an hydroxyapatite permeable reactive barrier (PRB) inside the Mining Complex facility placed at Los Gigantes in the Argentine province of Cordoba (in advance named the site). Among the preliminary assessment activities that are being carried out before the installation of the PRB, it has been prepared a monitoring program of surface water and groundwater useful to develop an environmental baseline suitable for the efficiency assessment of the corrective action to be applied. An exploratory campaign was conducted in the site with the aim of establishing a monitoring net of meteorological and hydrological, as well as physical, chemical and biological parameters in matrixes of sediments, water and suspended particulate matter collected on a regular time basis from its surface water and groundwater bodies. The processed results turn into useful environmental information to: a) determine the status of the environmental baseline of the site, b) establish a water quality index (WQI) to manage the natural resource quality according to a rational basis, c) plan experiments related to the design process of a biogenic hydroxyapatite PRB and d) apply chemometric and mechanistic models to forecast the contaminants mobilization through different scenarios and improve the engineering design of the PRB. Once achieved the hydrogeological characterisation of the site and taking into account the originality of the system the following results have been reached: 1) The boundaries of

  4. First-Year Vitality of Reforestation Plantings in Response to Herbivore Exclusion on Reclaimed Appalachian Surface-Mined Land

    Directory of Open Access Journals (Sweden)

    Zachary J. Hackworth

    2018-04-01

    Full Text Available Conventional Appalachian surface-mine reclamation techniques repress natural forest regeneration, and tree plantings are often necessary for reforestation. Reclaimed Appalachian surface mines harbor a suite of mammal herbivores that forage on recently planted seedlings. Anecdotal reports across Appalachia have implicated herbivory in the hindrance and failure of reforestation efforts, yet empirical evaluation of herbivory impacts on planted seedling vitality in this region remains relatively uninitiated. First growing-season survival, height growth, and mammal herbivory damage of black locust (Robinia pseudoacacia L., shortleaf pine (Pinus echinata Mill., and white oak (Quercus alba L. are presented in response to varying intensities of herbivore exclusion. Seedling survival was generally high, and height growth was positive for all species. The highest herbivory incidence of all tree species was observed in treatments offering no herbivore exclusion. While seedling protectors lowered herbivory incidence compared with no exclusion, full exclusion treatments resulted in the greatest reduction of herbivore damage. Although herbivory from rabbits, small mammals, and domestic animals was observed, cervids (deer and elk were responsible for 95.8% of all damaged seedlings. This study indicates that cervids forage heavily on planted seedlings during the first growing-season, but exclusion is effective at reducing herbivory.

  5. Surface deformation in areas of abandoned mining: a case study of InSAR applied in the Northumberland region of the UK

    Science.gov (United States)

    Mccormack, Harry; Bateson, Luke; Banton, Carl; Holley, Rachel; Lawrence, David; Cigna, Francesca; Watson, Ian; Burren, Richard

    2013-04-01

    The United Kingdom has a rich history of coal mining probably dating back to Roman times, and this was a driving force behind the industrial revolution. Although the amount of mining has decreased significantly in recent years, the effects of mining on ground stability are widespread, complex and under-monitored. The Coal Authority is responsible for protecting the public and environment in coal mining areas. Particularly they are responsible for administering coal mining subsidence damage claims and preventing problems due to rising groundwater in old mining areas. Drawing on the expertise of Fugro NPA (FNPA) and the British Geological Survey (BGS), the aim of this project was to show how a wide-area ground stability dataset with associated geological interpretation could help the Coal Authority better administer their subsidence claims and groundwater management. This work was performed within the Terrafirma project. The study area chosen was the Northumberland and Durham coalfield where the last active mine closed in 2005. More than 20 seams have been mined and as depths increased this led to the need to pump water to prevent the mines from flooding. As the mines shut down the pumping stopped, causing the water level to rise and recover. Using interferometric synthetic aperture radar (InSAR) techniques FNPA produced a surface deformation dataset which was interpreted by BGS to add value in the form of geological interpretation. The dataset covers two epochs; 1995-2000 and 2002-2008. During the earlier epoch eight to nine 'hotspots' of subsidence were identified, mainly in the south of the study area. All but one of the subsidence areas shows a strong spatial correlation with areas of past mining. However there is a discrepancy in the timing of InSAR deformations and the timing of subsidence that would be expected given the type of workings. It is suspected that the spatial and temporal pattern of deformation relates not only to material extraction but also to

  6. Uranium mining

    International Nuclear Information System (INIS)

    2008-01-01

    Full text: The economic and environmental sustainability of uranium mining has been analysed by Monash University researcher Dr Gavin Mudd in a paper that challenges the perception that uranium mining is an 'infinite quality source' that provides solutions to the world's demand for energy. Dr Mudd says information on the uranium industry touted by politicians and mining companies is not necessarily inaccurate, but it does not tell the whole story, being often just an average snapshot of the costs of uranium mining today without reflecting the escalating costs associated with the process in years to come. 'From a sustainability perspective, it is critical to evaluate accurately the true lifecycle costs of all forms of electricity production, especially with respect to greenhouse emissions, ' he says. 'For nuclear power, a significant proportion of greenhouse emissions are derived from the fuel supply, including uranium mining, milling, enrichment and fuel manufacture.' Dr Mudd found that financial and environmental costs escalate dramatically as the uranium ore is used. The deeper the mining process required to extract the ore, the higher the cost for mining companies, the greater the impact on the environment and the more resources needed to obtain the product. I t is clear that there is a strong sensitivity of energy and water consumption and greenhouse emissions to ore grade, and that ore grades are likely to continue to decline gradually in the medium to long term. These issues are critical to the current debate over nuclear power and greenhouse emissions, especially with respect to ascribing sustainability to such activities as uranium mining and milling. For example, mining at Roxby Downs is responsible for the emission of over one million tonnes of greenhouse gases per year and this could increase to four million tonnes if the mine is expanded.'

  7. Evaluation of surface water quality in aquatic bodies under the influence of uranium mining (MG, Brazil).

    Science.gov (United States)

    Rodgher, Suzelei; de Azevedo, Heliana; Ferrari, Carla Rolim; Roque, Cláudio Vítor; Ronqui, Leilane Barbosa; de Campos, Michelle Burato; Nascimento, Marcos Roberto Lopes

    2013-03-01

    The quality of the water in a uranium-ore-mining area located in Caldas (Minas Gerais State, Brazil) and in a reservoir (Antas reservoir) that receives the neutralized acid solution leaching from the waste heaps generated by uranium mining was investigated. The samples were collected during four periods (October 2008, January, April and July 2009) from six sampling stations. Physical and chemical analyses were performed on the water samples, and the data obtained were compared with those of the Brazilian Environmental Standards and WHO standard. The water samples obtained from waste rock piles showed high uranium concentrations (5.62 mg L(-1)), high manganese values (75 mg L(-1)) and low average pH values (3.4). The evaluation of the water quality at the point considered the limit between the Ore Treatment Unit of the Brazilian Nuclear Industries and the environment (Consulta Creek) indicated contamination by fluoride, manganese, uranium and zinc. The Antas reservoir showed seasonal variations in water quality, with mean concentrations for fluoride (0.50 mg L(-1)), sulfate (16 mg L(-1)) and hardness (20 mg L(-1)) which were low in January, evidencing the effect of rainwater flowing into the system. The concentrations for fluoride, sulfate and manganese were close or above to the limits established by current legislation at the point where the treated mining effluent was discharged and downstream from this point. This study demonstrated that the effluent discharged by the UTM affected the quality of the water in the Antas reservoir, and thus the treatments currently used for effluent need to be reviewed.

  8. Landscape management in an area affected by surface brown coal mining

    Science.gov (United States)

    Vráblíková, J.; Wildová, E.; Vráblík, P.; Blažková, M.

    2017-10-01

    The contribution summarizes results of a project concentrated on landscape management of an area affected by brown coal mining located in northern Bohemia (The Most basin) focusing on restoration and reclamation processes. It describes in particular the shares of individual types of reclamations in the area of interest. A strategic document that also supports landscape restoration in anthropogenically burdened regions was written within the project called “Restart” and the second part of the contribution is focused on its chapters which address this issue.

  9. Process mining

    DEFF Research Database (Denmark)

    van der Aalst, W.M.P.; Rubin, V.; Verbeek, H.M.W.

    2010-01-01

    Process mining includes the automated discovery of processes from event logs. Based on observed events (e.g., activities being executed or messages being exchanged) a process model is constructed. One of the essential problems in process mining is that one cannot assume to have seen all possible...... behavior. At best, one has seen a representative subset. Therefore, classical synthesis techniques are not suitable as they aim at finding a model that is able to exactly reproduce the log. Existing process mining techniques try to avoid such “overfitting” by generalizing the model to allow for more...

  10. Assessment of the Pollutants in Soils and Surface Waters Around Gümüşköy Silver Mine (Kütahya, Turkey).

    Science.gov (United States)

    Arslan, Şebnem; Çelik, Mehmet

    2015-10-01

    Heavy metal concentrations in surface water and soil samples around Gümüşköy Silver Mine, located in Köprüören Basin, were determined to evaluate the anthropogenic level of contamination due to mining activities. The mean concentrations of As, Pb, Sb and Cd in 12 soil samples came out to be 1193, 844, 66 and 19 ppm, respectively. Soil pollution assessment was carried out by using geoaccumulation index (Igeo), enrichment factor (EF) and pollution index (PI). Igeo, EF and PI suggest anthropogenic pollution of As, Pb, Sb and Zn in the areas where there is leakage of these heavy metals from the waste pools of the silver mine facility. Water samples collected from the surface waters also have elevated concentrations of these heavy metals. The contaminants are most probably transported by surface waters in the rainy season.

  11. Reconstruction of historical land use of the Sokolov Region as the basis for the recovery of land affected by surface mining

    Energy Technology Data Exchange (ETDEWEB)

    Trpakova, I.; Trpak, P.; Sklenicka, P.; Skalos, J.; Engstova, B. [Czech Univ. of Life Sciences, Prague, (Czech Republic). Faculty of Environmental Sciences

    2010-07-01

    The reconstruction of the historical land use of 50 historical cadastral areas disturbed by surface mining in Bohemia was discussed in this paper. This included a comparison of statistical and geographic information system (GIS) data of three cadastral areas. The paper described the use of landscape at the time of stable cadastre from 1841 to 1842. The purpose of the study was to use the results as the basis for the Sokolovsko brown coal basin reclamation. Specifically, the paper discussed the material, methodology, sources and tracked parameters. It was found that the essential type of Sokolov landscape after 1840 were brooks, rivers, ponds, springs, wetlands, and peat-bogs. It was the essential stabilizing element that was later followed by meadows and pastures together with forests. It was concluded that the old maps and the land use statistic data were an appropriate source for reconstruction of historical land use if the entry data were processed and interpreted correctly. 39 refs., 2 figs.

  12. Barium concentrations and speciation in surface waters collected from an active barium mining area in Guizhou Province, southwestern China.

    Science.gov (United States)

    Lu, Qinhui; Xu, Xiaohang; Xu, Zhidong; Liang, Longchao; Shang, Lihai; Xiao, Dean; Zhang, Sensen; Jiang, Yuping; Qiu, Guangle

    2018-03-01

    Barium (Ba) is a toxic element and can cause serious health effects. Humans have experienced increased exposure to Ba due to its intensive usage in industrial areas and daily life. Anthropogenic activities of Ba mining and the manufacture of Ba containing products introduce the element into surrounding areas, posing environmental concerns. Concentrations of total Ba (TBa) and dissolved Ba (DBa) in water samples collected from active Ba mines in Tianzhu, east Guizhou Province, southwestern China were measured to show the regional dispersion of Ba contamination. Aqueous Ba species in water were calculated using the PHREEQC program. The results showed that TBa and DBa concentrations ranged from 6.7 to 483.1 μg/L and from 7.5 to 222.7 μg/L, respectively. TBa concentrations presented a high average value of 126.6 μg/L and greatly exceeded the reported common value of 10 μg/L Ba in surface water set by the Ministry of Environment Protection of China. PHREEQC results indicated that Ba species in water were present as Ba 2+ , BaSO 4 , BaHCO 3 , BaCO 3 , and BaOH + . The distribution of Ba species in water is controlled by pH and total organic carbon (TOC), and the lower pH (pH < 7) the higher the dissolved fractions. The log K d values (K d , dissolved-particulate distribution coefficients) varied from 2.41 to 6.32. Significant correlations were observed among Ba 2+ and K + , Na + , Cl - , NO 3 - , with Pearson correlation coefficients of 0.425, 0.531, 0.853, 0.612, and 0.329, respectively (p < 0.01). Elevated Ba concentrations in water indicated that the Ba contamination and its distribution pattern in local aquatic ecosystems are derived from Ba mining sites in the Tianzhu area.

  13. South African mining experience

    Energy Technology Data Exchange (ETDEWEB)

    Buck, J.D. (British Coal Corporation (UK). North Selby Mine)

    1992-09-01

    The article details the author's visit to South Africa on the 1990 Institution of Mining Electrical and Mining Mechanical Engineers Travelling Scholarship. The author undertook to visit to six coal mines (including two opencast mines and one rail loading terminal), four local engineering manufacturers, three power stations, three gold mines, two diamond mines (both in Botswana), a steel and vanadium works, the 1990 Mining Electra exhibition and the head offices of the Anglo American Corporation of South Africa. 4 figs., 2 tabs.

  14. Mountaintop mining consequences

    Science.gov (United States)

    M.A. Palmer; E.S. Bernhardt; W.H. Schlesinger; K.N. Eshleman; E. Foufoula-Georgiou; M.S. Hendryx; A.D. Lemly; G.E. Likens; O.L. Loucks; M.E. Power; P.S. White; P.R. Wilcock

    2010-01-01

    There has been a global, 30-year increase in surface mining (1), which is now the dominant driver of land-use change in the central Appalachian ecoregion of the United States (2). One major form of such mining, mountaintop mining with valley fills (MTM/VF) (3), is widespread throughout eastern Kentucky, West Virginia (WV), and southwestern Virginia. Upper elevation...

  15. Method of data mining including determining multidimensional coordinates of each item using a predetermined scalar similarity value for each item pair

    Science.gov (United States)

    Meyers, Charles E.; Davidson, George S.; Johnson, David K.; Hendrickson, Bruce A.; Wylie, Brian N.

    1999-01-01

    A method of data mining represents related items in a multidimensional space. Distance between items in the multidimensional space corresponds to the extent of relationship between the items. The user can select portions of the space to perceive. The user also can interact with and control the communication of the space, focusing attention on aspects of the space of most interest. The multidimensional spatial representation allows more ready comprehension of the structure of the relationships among the items.

  16. Detecting surface coal mining areas from remote sensing imagery: an approach based on object-oriented decision trees

    Science.gov (United States)

    Zeng, Xiaoji; Liu, Zhifeng; He, Chunyang; Ma, Qun; Wu, Jianguo

    2017-01-01

    Detecting surface coal mining areas (SCMAs) using remote sensing data in a timely and an accurate manner is necessary for coal industry management and environmental assessment. We developed an approach to effectively extract SCMAs from remote sensing imagery based on object-oriented decision trees (OODT). This OODT approach involves three main steps: object-oriented segmentation, calculation of spectral characteristics, and extraction of SCMAs. The advantage of this approach lies in its effective integration of the spectral and spatial characteristics of SCMAs so as to distinguish the mining areas (i.e., the extracting areas, stripped areas, and dumping areas) from other areas that exhibit similar spectral features (e.g., bare soils and built-up areas). We implemented this method to extract SCMAs in the eastern part of Ordos City in Inner Mongolia, China. Our results had an overall accuracy of 97.07% and a kappa coefficient of 0.80. As compared with three other spectral information-based methods, our OODT approach is more accurate in quantifying the amount and spatial pattern of SCMAs in dryland regions.

  17. Potential effects of surface coal mining on the hydrology of the Corral Creek area, Hanging Woman Creek coal field, southeastern Montana

    Science.gov (United States)

    McClymonds, N.E.

    1984-01-01

    The Corral Creek area of the Hanging Woman Creek coal field, 9 miles east of the Decker coal mines near the Tongue River, contains large reserves of Federal coal that have been identified for potential lease sale. A hydrologic study was conducted in the area to describe existing hydrologic systems and to study assess potential impacts of surface coal mining on local water resources. Hydrogeologic data collected indicate that aquifers are coal and sandstone beds within the Tongue River Member of the Fort Union Formation (Paleocene age) and sand and gravel in valley alluvium (Pleistocene and Holocene age). Surface-water resources are limited to a few spring-fed stock ponds in the higher parts of the area and the intermittent flow of Corral Creek near the mouth. Most of the stock ponds in the area become dry by midsummer. Mining of the Anderson coal bed would remove three stock wells and would lower the potentiometric surface within the coal and sandstone aquifers. The alluvial aquifer beneath Corral Creek and South Fork would be removed. Although mining would alter the existing hydrologic systems and remove several shallow wells, alternative ground-water supplies are available that could be developed to replace those lost by mining. (USGS)

  18. Mine drainage treatment

    OpenAIRE

    Golomeova, Mirjana; Zendelska, Afrodita; Krstev, Boris; Golomeov, Blagoj; Krstev, Aleksandar

    2012-01-01

    Water flowing from underground and surface mines and contains high concentrations of dissolved metals is called mine drainage. Mine drainage can be categorized into several basic types by their alkalinity or acidity. Sulfide rich and carbonate poor materials are expected to produce acidic drainage, and alkaline rich materials, even with significant sulfide concentrations, often produce net alkaline water. Mine drainages are dangerous because pollutants may decompose in the environment. In...

  19. Failure of man-made cavities in salt and surface subsidence due to sulfur mining

    Energy Technology Data Exchange (ETDEWEB)

    Coates, G.K.; Lee, C.A.; McClain, W.C.; Senseny, P.E.

    1981-01-01

    An engineering data base relevant to subsidence due to sulfur mining and to structural failure of cavities in salt is established, evaluated and documented. Nineteen failure events are discussed. Based on these documented failure events, capabilities of and inputs to a mathematical model of cavity failure are determined. Two failure events are adequately documented for use in model verification studies. A conclusion of this study that is pertinent to the Strategic Petroleum Reserve is that cavity failures in dome salt are fairly rare, but that as the number of large cavities (especially those having large roof spans) increases, failures will probably be more common unless stability and failure mechanisms of cavities are better understood.

  20. Implementation of paste backfill mining technology in Chinese coal mines.

    Science.gov (United States)

    Chang, Qingliang; Chen, Jianhang; Zhou, Huaqiang; Bai, Jianbiao

    2014-01-01

    Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application.

  1. Implementation of Paste Backfill Mining Technology in Chinese Coal Mines

    Directory of Open Access Journals (Sweden)

    Qingliang Chang

    2014-01-01

    Full Text Available Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application.

  2. Implementation of Paste Backfill Mining Technology in Chinese Coal Mines

    Science.gov (United States)

    Chang, Qingliang; Zhou, Huaqiang; Bai, Jianbiao

    2014-01-01

    Implementation of clean mining technology at coal mines is crucial to protect the environment and maintain balance among energy resources, consumption, and ecology. After reviewing present coal clean mining technology, we introduce the technology principles and technological process of paste backfill mining in coal mines and discuss the components and features of backfill materials, the constitution of the backfill system, and the backfill process. Specific implementation of this technology and its application are analyzed for paste backfill mining in Daizhuang Coal Mine; a practical implementation shows that paste backfill mining can improve the safety and excavation rate of coal mining, which can effectively resolve surface subsidence problems caused by underground mining activities, by utilizing solid waste such as coal gangues as a resource. Therefore, paste backfill mining is an effective clean coal mining technology, which has widespread application. PMID:25258737

  3. The political economy of regulation: Investigation of the relationship between design and performance standards in surface coal mining

    International Nuclear Information System (INIS)

    Walker, K.R.

    1991-01-01

    Research concerning political and economic regulatory policy was conducted on 15 randomly selected surface coal mines in Tennessee. Data on violations were collected over a 6-year period from 1979 through 1984. The primary purpose of this study was to investigate the approaches of the Carter and Reagan administrations concerning the implementation of design and performance regulations of Public Law 95-87. The study concluded that: (1) A change in political administration affects regulatory policy concerning enforcement practices. (2) Regulatory policy is altered in the direction of economic activity believed by an administration to be desirable to society and its constituents. (3) Elaborate rule making activity constrains market activity. (4) The coupling of design and performance standards should be retained. No difference was found in the number of violations for design and associated performance standards. Findings support the theory that it is the administration that affects change in regulatory policy, and not the regulatory construct for compliance with a mandate

  4. Assessment of Radioactive Materials and Heavy Metals in the Surface Soil around the Bayanwula Prospective Uranium Mining Area in China

    Directory of Open Access Journals (Sweden)

    Haribala Bai

    2017-03-01

    Full Text Available The present work is the first systematic and large scale study on radioactive materials and heavy metals in surface soil around the Bayanwula prospective uranium mining area in China. In this work, both natural and anthropogenic radionuclides and heavy metals in 48 surface soil samples were analyzed using High Purity Germanium (HPGe γ spectrometry and inductively coupled plasma-mass spectrometry (ICP-MS. The obtained mean activity concentrations of 238U, 226Ra, 232Th, 40K, and 137Cs were 25.81 ± 9.58, 24.85 ± 2.77, 29.40 ± 3.14, 923.0 ± 47.2, and 5.64 ± 4.56 Bq/kg, respectively. The estimated average absorbed dose rate and annual effective dose rate were 76.7 ± 3.1 nGy/h and 83.1 ± 3.8 μSv, respectively. The radium equivalent activity, external hazard index, and internal hazard index were also calculated, and their mean values were within the acceptable limits. The estimated lifetime cancer risk was 3.2 × 10−4/Sv. The heavy metal contents of Cr, Ni, Cu, Zn, As, Cd, and Pb from the surface soil samples were measured and their health risks were then assessed. The concentrations of all heavy metals were much lower than the average backgrounds in China except for lead which was about three times higher than that of China’s mean. The non-cancer and cancer risks from the heavy metals were estimated, which are all within the acceptable ranges. In addition, the correlations between the radionuclides and the heavy metals in surface soil samples were determined by the Pearson linear coefficient. Strong positive correlations between radionuclides and the heavy metals at the 0.01 significance level were found. In conclusion, the contents of radionuclides and heavy metals in surface soil around the Bayanwula prospective uranium mining area are at a normal level.

  5. Mining for osteogenic surface topographies: In silico design to in vivo osseo-integration.

    Science.gov (United States)

    Hulshof, Frits F B; Papenburg, Bernke; Vasilevich, Aliaksei; Hulsman, Marc; Zhao, Yiping; Levers, Marloes; Fekete, Natalie; de Boer, Meint; Yuan, Huipin; Singh, Shantanu; Beijer, Nick; Bray, Mark-Anthony; Logan, David J; Reinders, Marcel; Carpenter, Anne E; van Blitterswijk, Clemens; Stamatialis, Dimitrios; de Boer, Jan

    2017-08-01

    Stem cells respond to the physicochemical parameters of the substrate on which they grow. Quantitative material activity relationships - the relationships between substrate parameters and the phenotypes they induce - have so far poorly predicted the success of bioactive implant surfaces. In this report, we screened a library of randomly selected designed surface topographies for those inducing osteogenic differentiation of bone marrow-derived mesenchymal stem cells. Cell shape features, surface design parameters, and osteogenic marker expression were strongly correlated in vitro. Furthermore, the surfaces with the highest osteogenic potential in vitro also demonstrated their osteogenic effect in vivo: these indeed strongly enhanced bone bonding in a rabbit femur model. Our work shows that by giving stem cells specific physicochemical parameters through designed surface topographies, differentiation of these cells can be dictated. Copyright © 2017 Elsevier Ltd. All rights reserved.

  6. Doomed reservoirs in Kansas, USA? Climate change and groundwater mining on the Great Plains lead to unsustainable surface water storage

    Science.gov (United States)

    Brikowski, T. H.

    2008-06-01

    SummaryStreamflow declines on the Great Plains of the US are causing many Federal reservoirs to become profoundly inefficient, and will eventually drive them into unsustainability as negative annual reservoir water budgets become more common. The streamflow declines are historically related to groundwater mining, but since the mid-1980s correlate increasingly with climate. This study highlights that progression toward unsustainability, and shows that future climate change will continue streamflow declines at historical rates, with severe consequences for surface water supply. An object lesson is Optima Lake in the Oklahoma Panhandle, where streamflows have declined 99% since the 1960s and the reservoir has never been more than 5% full. Water balances for the four westernmost Federal reservoirs in Kansas (Cedar Bluff, Keith Sebelius, Webster and Kirwin) show similar tendencies. For these four, reservoir inflow has declined by 92%, 73%, 81% and 64% respectively since the 1950s. Since 1990 total evaporated volumes relative to total inflows amounted to 68%, 83%, 24% and 44% respectively. Predictions of streamflow and reservoir performance based on climate change models indicate 70% chance of steady decline after 2007, with a ˜50% chance of failure (releases by gravity flow impossible) of Cedar Bluff Reservoir between 2007 and 2050. Paradoxically, a 30% chance of storage increase prior 2020 is indicated, followed by steady declines through 2100. Within 95% confidence the models predict >50% decline in surface water resources between 2007 and 2050. Ultimately, surface storage of water resources may prove unsustainable in this region, forcing conversion to subsurface storage.

  7. Survey of wildlife, including aquatic mammals, associated with riparian habitat on the Syncrude Canada Ltd. Aurora Mine environmental impact assessment local study area

    International Nuclear Information System (INIS)

    Surrendi, D.C.

    1996-01-01

    A general overview of the wildlife associated with riparian habitats at Syncrude's proposed Aurora Mine, located 70 km northeast of Fort McMurray, Alberta on the east side of the Athabasca River, was presented. The area is underlain by bitumen and is being considered for bitumen extraction and production of synthetic crude oil. Two surveys were conducted with the help of experienced trappers from the community at Fort McKay. One was an aerial survey on November 3, 1995, the other a ground survey on November 29-30, 1995. The two surveys yielded 248 observed tracks on four 500 metre transects. The study area was comprised of boreal forest with natural drainage via Stanley Creek into the Muskeg River and via Fort Creek into the Athabasca River. Beavers, fox, weasel, mink, rabbit, wolf, moose, deer, ptarmigan, sharp-tailed grouse and ruffed grouse, lynx, coyote, river otter and mice were associated with riparian habitat on the study area. There was no sign of muskrat in the study area. It was concluded that in order to develop an understanding of reclamation alternatives for mined areas in the region, future detailed examination of the site should be approached through the integration of traditional ecological knowledge and conventional scientific methodology. 26 refs., 12 tabs., 2 figs

  8. Survey of wildlife, including aquatic mammals, associated with riparian habitat on the Syncrude Canada Ltd. Aurora Mine environmental impact assessment local study area

    Energy Technology Data Exchange (ETDEWEB)

    Surrendi, D.C.

    1996-12-31

    A general overview of the wildlife associated with riparian habitats at Syncrude`s proposed Aurora Mine, located 70 km northeast of Fort McMurray, Alberta on the east side of the Athabasca River, was presented. The area is underlain by bitumen and is being considered for bitumen extraction and production of synthetic crude oil. Two surveys were conducted with the help of experienced trappers from the community at Fort McKay. One was an aerial survey on November 3, 1995, the other a ground survey on November 29-30, 1995. The two surveys yielded 248 observed tracks on four 500 metre transects. The study area was comprised of boreal forest with natural drainage via Stanley Creek into the Muskeg River and via Fort Creek into the Athabasca River. Beavers, fox, weasel, mink, rabbit, wolf, moose, deer, ptarmigan, sharp-tailed grouse and ruffed grouse, lynx, coyote, river otter and mice were associated with riparian habitat on the study area. There was no sign of muskrat in the study area. It was concluded that in order to develop an understanding of reclamation alternatives for mined areas in the region, future detailed examination of the site should be approached through the integration of traditional ecological knowledge and conventional scientific methodology. 26 refs., 12 tabs., 2 figs.

  9. The use of landscape fabric and supplemental irrigation to enhance survival and growth of woody perennials planted on reclaimed surface mine lands

    Science.gov (United States)

    R .C. Musselman; F. W. Smith; W. D. Shepperd; L. A. Asherin; B. W. Gee

    2009-01-01

    A study was initiated to determine the effectiveness of landscape fabric and supplemental irrigation in survival and growth of woody perennials planted on reclaimed surface coal mine lands. The study compared growth and survival of nursery grown potted aspen and serviceberry planted with or without landscape fabric, and with or without biweekly supplemental irrigation...

  10. One-year response of American sycamore (Platanus occidentalis L.) and black locust (Robinia pseudoacacia L.) to granular fertilizer applications on a reclaimed surface mine in eastern Kentucky

    Science.gov (United States)

    Josh Brinks; John Lhotka; Chris. Barton

    2011-01-01

    The establishment of intensively managed woody energy crops on reclaimed surface mine lands provides an opportunity to diversify domestic biomass sources, while increasing the productivity and economic value of underutilized land. Our objective is to test the effect of fertilization on the growth and biomass accumulation of American sycamore (Platanus...

  11. Evaluation of water quality in surface water and shallow groundwater: a case study of a rare earth mining area in southern Jiangxi Province, China.

    Science.gov (United States)

    Hao, Xiuzhen; Wang, Dengjun; Wang, Peiran; Wang, Yuxia; Zhou, Dongmei

    2016-01-01

    This study was conducted to evaluate the quality of surface water and shallow groundwater near a rare earth mining area in southern Jiangxi Province, China. Water samples from paddy fields, ponds, streams, wells, and springs were collected and analyzed. The results showed that water bodies were characterized by low pH and high concentrations of total nitrogen (total N), ammonium nitrogen (NH4 (+)-N), manganese (Mn), and rare earth elements (REEs), which was likely due to residual chemicals in the soil after mining activity. A comparison with the surface water standard (State Environmental Protection Administration & General Administration of Quality Supervision, Inspection and Quarantine of China GB3838, 2002) and drinking water sanitary standard (Ministry of Health & National Standardization Management Committee of China GB5749, 2006) of China revealed that 88 % of pond and stream water samples investigated were unsuitable for agricultural use and aquaculture water supply, and 50 % of well and spring water samples were unsuitable for drinking water. Moreover, significant cerium (Ce) negative and heavy REEs enrichment was observed after the data were normalized to the Post-Archean Australian Shales (PAAS). Principal component analysis indicated that the mining activity had a more significant impact on local water quality than terrace field farming and poultry breeding activities. Moreover, greater risk of water pollution and adverse effects on local residents' health was observed with closer proximity to mining sites. Overall, these findings indicate that effective measures to prevent contamination of surrounding water bodies from the effects of mining activity are needed.

  12. 30 CFR 77.1712 - Reopening mines; notification; inspection prior to mining.

    Science.gov (United States)

    2010-07-01

    ... to mining. 77.1712 Section 77.1712 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION... prior to mining. Prior to reopening any surface coal mine after it has been abandoned or declared... an authorized representative of the Secretary before any mining operations in such mine are...

  13. 30 CFR 819.21 - Auger mining: Protection of underground mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Auger mining: Protection of underground mining. 819.21 Section 819.21 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT... STANDARDS-AUGER MINING § 819.21 Auger mining: Protection of underground mining. Auger holes shall not extend...

  14. Effects of wearing gumboots and leather lace-up boots on lower limb muscle activity when walking on simulated underground coal mine surfaces.

    Science.gov (United States)

    Dobson, Jessica A; Riddiford-Harland, Diane L; Steele, Julie R

    2015-07-01

    This study aimed to investigate the effects of wearing two standard underground coal mining work boots (a gumboot and a leather lace-up boot) on lower limb muscle activity when participants walked across simulated underground coal mining surfaces. Quadriceps (rectus femoris, vastus medialis, vastus lateralis) and hamstring (biceps femoris, semitendinosus) muscle activity were recorded as twenty male participants walked at a self-selected pace around a circuit while wearing each boot type. The circuit consisted of level, inclined and declined surfaces composed of rocky gravel and hard dirt. Walking in a leather lace-up boot, compared to a gumboot, resulted in increased vastus lateralis and increased biceps femoris muscle activity when walking on sloped surfaces. Increased muscle activity appears to be acting as a slip and/or trip prevention strategy in response to challenging surfaces and changing boot features. Copyright © 2015 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  15. Mined-out land

    International Nuclear Information System (INIS)

    Reinsalu, Enno; Toomik, Arvi; Valgma, Ingo

    2002-01-01

    Estonian mineral resources are deposited in low depth and mining fields are large, therefore vast areas are affected by mining. There are at least 800 deposits with total area of 6,000 km 2 and about the same number of underground mines, surface mines, peat fields, quarries, and sand and gravel pits. The deposits cover more than 10% of Estonian mainland. The total area of operating mine claims exceeds 150 km 2 that makes 0.3 % of Estonian area. The book is written mainly for the people who are living or acting in the area influenced by mining. The observations and research could benefit those who are interested in geography and environment, who follow formation and look of mined-out landscapes. The book contains also warnings for careless people on and under the surface of the mined-out land. Part of the book contains results of the research made in 1968-1993 by the first two authors working at the Estonian branch of A.Skochinsky Institute of Mining. Since 1990, Arvi Toomik continued this study at the Northeastern section of the Institute of Ecology of Tallinn Pedagogical University. Enno Reinsalu studied aftereffects of mining at the Mining Department of Tallinn Technical University from 1998 to 2000. Geographical Information System for Mining was studied by Ingo Valgma within his doctoral dissertation, and this book is one of the applications of his study

  16. Identification of linkages between potential Environmental and Social Impacts of Surface Mining and Ecosystem Services in Thar Coal field, Pakistan

    Science.gov (United States)

    Hina, A.

    2017-12-01

    Although Thar coal is recognized to be one of the most abundant fossil fuel that could meet the need to combat energy crisis of Pakistan, but there still remains a challenge to tackle the associated environmental and socio-ecological changes and its linkage to the provision of ecosystem services of the region. The study highlights the importance of considering Ecosystem service assessment to be undertaken in all strategic Environmental and Social Assessments of Thar coal field projects. The three-step approach has been formulated to link the project impacts to the provision of important ecosystem services; 1) Identification of impact indicators and parameters by analyzing the environmental and social impacts of surface mining in Thar Coal field through field investigation, literature review and stakeholder consultations; 2) Ranking of parameters and criteria alternatives using Multi-criteria Decision Analysis(MCDA) tool: (AHP method); 3) Using ranked parameters as a proxy to prioritize important ecosystem services of the region; The ecosystem services that were prioritized because of both high significance of project impact and high project dependence are highlighted as: Water is a key ecosystem service to be addressed and valued due to its high dependency in the area for livestock, human wellbeing, agriculture and other purposes. Crop production related to agricultural services, in association with supply services such as soil quality, fertility, and nutrient recycling and water retention need to be valued. Cultural services affected in terms of land use change and resettlement and rehabilitation factors are recommended to be addressed. The results of the analysis outline a framework of identifying these linkages as key constraints to foster the emergence of green growth and development in Pakistan. The practicality of implementing these assessments requires policy instruments and strategies to support human well-being and social inclusion while minimizing

  17. Mining in the Future: Autonomous Robotics for Safer Mines

    CSIR Research Space (South Africa)

    Shahdi, A

    2012-10-01

    Full Text Available include ? Security patrols ? Transportation of cargo ? Mining ? CSIR 2012 Slide 7 Mine Safety Platform ? Joint project with CSIR Centre for Mining Innovation and Material Science and Manufacturing ? Focuses on performing pre-entry safety... Project outcome can be adopted for automating haul trucks in opencast mines ? Mine Safety Platform is a joint project with CMI and MSM targeting the task of post-blast inspection in deep hard rock mines ? CSIR 2012 Slide 14 Thank you ...

  18. Protection and restoration of soil in mining operations which disrupt the surface of the earth, with the open pit method of working minerals (problems, obtained data and recommendations)

    Energy Technology Data Exchange (ETDEWEB)

    Debelak, M.

    1981-01-01

    A critical analysis is made of the current state and the ways to solve the problem of protection and restoration of the sections of the earth's surface and sources of drinking water which can be disrupted with the open pit method of working minerals. The need is advanced for creating a system of coordination and planning of the activity of all the organizations associated with working minerals, restoration operations and inspection of them. The order of preparation for recultivation during mining operations (in particular, storage of the fertile ground) and conducting them after the end of mining are described.

  19. Polar Organic Compounds in Surface Waters Collected Near Lead-Zinc Mine and Milling Operations in Missouri

    Science.gov (United States)

    Rostad, C. E.; Schmitt, C. J.; Schumacher, J. G.; Leiker, T. J.

    2007-12-01

    Surface-water samples were collected near a lead mine and mill tailings about 70 miles southwest of St. Louis, Missouri, during the summer of 2006. The purpose of this sampling was to determine if polar organic compounds were present that could be a cause of documented negative impacts to biota downstream. Water samples contained relatively high concentrations of dissolved organic carbon for surface waters (greater than 20 mg/L), but were colorless, which precluded naturally occurring aquatic humic or fulvic acids. Previous analysis indicated that samples were devoid of pesticides and acid/base/neutral extractable semi-volatile organic compounds, such as polycyclic aromatic hydrocarbons. After isolation by three different types of solid phase extraction, samples were analyzed by electrospray ionization/mass spectrometry. Polar organic compounds commonly used in the milling process, such as alkyl xanthates, were not found; however, xanthate degradation products were detected. Most of the polar organic compounds identified contained sulfonate groups, which are characteristic of some of the reagents used in the milling process. Sulfonate compounds may have low sorption onto soil or sediments and be mobile in the aqueous environment.

  20. Designing vertical mine shafts under conditions of increasing shaft depth with rock hoisting to the operating mining level

    Energy Technology Data Exchange (ETDEWEB)

    Durov, E.M.

    1983-05-01

    A system for shaft excavation in deep coal mines with mining depth exceeding 1,000 m is discussed. During mine sinking rocks are removed to the ground surface. When depth of a deep mine shaft is increased rocks are removed to the operating mining level, causing lower investment costs than the system with rock hoisting to the ground surface. The Yuzhgiproshakht design firm carries out investigations on the optimum methods for increasing shaft depth in coal mines. Coal mines with the following coal output are included in evaluations: 0.9, 1.2, 1.5, and 1.8 Mt/year. Mine shaft depth of 600, 800, 1000, 1200, 1400 and 1600 m is analyzed. Shaft depth is increased by 100, 200, 300 or 400 m. Shaft sinking rate ranges from 10 to 70 m/month. Effects of rock hoisting from the shaft bottom on the hoisting scheme in a mine shaft are analyzed. Position of hoisting bucket in relation to cages or skips moving in a shaft is investigated. Investigation results are given in 5 schemes. Analyses show that use of a shaft sinking system with rock hoisting to the ground surface during shaft excavation and with rock hoisting to the operating mining level during shaft depth increasing is economical when a shaft with skips is from 7 to 8 m in diameter or when a cage shaft is 6 m, 7 m or 8 m in diameter. Use of standardized shaft excavation systems is recommended. (In Russian)

  1. Mining Hidden Gems Beneath the Surface: A Look At the Invisible Web.

    Science.gov (United States)

    Carlson, Randal D.; Repman, Judi

    2002-01-01

    Describes resources for researchers called the Invisible Web that are hidden from the usual search engines and other tools and contrasts them with those resources available on the surface Web. Identifies specialized search tools, databases, and strategies that can be used to locate credible in-depth information. (Author/LRW)

  2. Reduction of surface subsidence risk by fly ash exploitation as filling material in deep mining areas

    Czech Academy of Sciences Publication Activity Database

    Trčková, Jiřina; Šperl, Jan

    2010-01-01

    Roč. 53, č. 2 (2010), s. 251-258 ISSN 0921-030X Institutional research plan: CEZ:AV0Z30460519 Keywords : undermining * subsidence of the surface * impact reduction Subject RIV: DO - Wilderness Conservation Impact factor: 1.398, year: 2010 www.springerlink.com/content/y8257893528lp56w/

  3. Experimental 3-D modelling of surface subsidence affected by underground mining activities

    Czech Academy of Sciences Publication Activity Database

    Trčková, Jiřina

    2009-01-01

    Roč. 109, č. 12 (2009), s. 739-744 ISSN 0038-223X R&D Projects: GA AV ČR IAA2119402 Institutional research plan: CEZ:AV0Z30460519 Keywords : undermining * subsidence of surface * 3-D experimental model Subject RIV: DO - Wilderness Conservation Impact factor: 0.216, year: 2009

  4. Integrated mined-area reclamation and land use planning. Volume 3F. A case study of surface mining and reclamation planning: Cannelton Mine No. 9-S, Cannelton, West Virginia

    Energy Technology Data Exchange (ETDEWEB)

    Bogner, J E; Perry, A O

    1977-02-01

    A mountain-top removal coal mining operation in south-central West Virginia is examined in this case study. A 2010 acre tract that is partly owned and partly leased by Cannelton Industries, Inc., has been about half stripped of the 5 Block and 6 Block Coals. The surrounding land area is characterized by steep-sided hills and generally lacks extensive tracts of level land suitable for agricultural or residential/commercial development. The Cannelton operation, which has already leveled several ridges, is creating areas which may be considered to have a higher land use potential than before mining. Although this site is generally isolated from urbanized areas and thus from structured regional planning efforts, it merits study as an excellent example of an innovating mining technique and integrated site-specific mining and reclamation planning.

  5. Environmental impact of uranium mining and milling

    International Nuclear Information System (INIS)

    Dory, A.B.

    1981-08-01

    The Atomic Energy Control Board is now involved from the early planning stages in the development of uranium mine/mill facilities. As a result, new facilities (including tailings management areas) are designed and developed to meet a high standard. The impact of the mines and tailings areas in the Elliot Lake area on ground and surface waters and air quality is discussed in detail

  6. 78 FR 39531 - Mine Rescue Teams

    Science.gov (United States)

    2013-07-01

    ... Requirements for Underground Coal Mine Operators and Mine Rescue Teams Type of mine rescue team Requirement Mine-site Composite Contract State-sponsored * * * * * * * Team must include at least two YES active employees from each covered large mine and at least one active employee from each covered small mine. Team...

  7. 30 CFR 761.200 - Interpretative rule related to subsidence due to underground coal mining in areas designated by...

    Science.gov (United States)

    2010-07-01

    ... to underground coal mining in areas designated by Act of Congress. 761.200 Section 761.200 Mineral... to underground coal mining in areas designated by Act of Congress. OSM has adopted the following... or limited. Subsidence due to underground coal mining is not included in the definition of surface...

  8. Pyrolusite Process® to remove acid mine drainage contaminants from Kimble Creek in Ohio: A pilot study

    Science.gov (United States)

    Shiv Hiremath; Kirsten Lehtoma; Mike Nicklow; Gary. Willison

    2013-01-01

    The Kimble Creek abandoned coal mine site, located on Wayne National Forest in southeastern Ohio, is among several abandoned coal mine sites that have been responsible for the acid mine drainage (AMD) polluting ground and surface water. Materials released by AMD include iron, aluminum, manganese, other hazardous substances, and acidity that are harmful to aquatic life...

  9. Mine waste management

    International Nuclear Information System (INIS)

    Hutchinson, I.P.G.; Ellison, R.D.

    1992-01-01

    This book reports on mine waste management. Topics covered include: Performance review of modern mine waste management units; Mine waste management requirements; Prediction of acid generation potential; Attenuation of chemical constituents; Climatic considerations; Liner system design; Closure requirements; Heap leaching; Ground water monitoring; and Economic impact evaluation

  10. Mining and the Environment

    International Development Research Centre (IDRC) Digital Library (Canada)

    These include technology-policy initiatives for education and innovation incentives for garimpo mining, as well as the adaptation of mining legislation to ...... in this area: it has had several significant international projects (participating in the development of mining projects in Venezuela, Argentina, Colombia, and Ecuador).

  11. Surface potential based modeling of charge, current, and capacitances in DGTFET including mobile channel charge and ambipolar behaviour

    Science.gov (United States)

    Jain, Prateek; Yadav, Chandan; Agarwal, Amit; Chauhan, Yogesh Singh

    2017-08-01

    We present a surface potential based analytical model for double gate tunnel field effect transistor (DGTFET) for the current, terminal charges, and terminal capacitances. The model accounts for the effect of the mobile charge in the channel and captures the device physics in depletion as well as in the strong inversion regime. The narrowing of the tunnel barrier in the presence of mobile charges in the channel is incorporated via modeling of the inverse decay length, which is constant under channel depletion condition and bias dependent under inversion condition. To capture the ambipolar current behavior in the model, tunneling at the drain junction is also included. The proposed model is validated against TCAD simulation data and it shows close match with the simulation data.

  12. Rock mass response to strong ground motion generated by mining induced seismic events and blasting observed at the surface of the excavations in deep level gold mines in South Africa

    Science.gov (United States)

    Milev, Alexander; Durrheim, Ray; Ogasawara, Hiroshi

    2014-05-01

    The strong ground motion generated by mining induced seismic events was studied to characterize the rock mass response and to estimate the site effect on the surface of the underground excavations. A stand-alone instruments, especially designed for recording strong ground motions, were installed underground at a number of deep level gold mines in South Africa. The instruments were recording data at the surface of the stope hangingwalls. A maximum value of 3 m/s was measured. Therefore data were compared to the data recorded in the solid rock by the mine seismic networks to determine the site response. The site response was defined as the ratio of the peak ground velocity measured at the surface of the excavations to the peak ground velocity inferred from the mine seismic data measured in the solid rocks. The site response measured at all mines studied was found to be 9 ± 3 times larger on average. A number of simulated rockbursts were conducted underground in order to estimate the rock mass response when subjected to extreme ground motion and derive the attenuation factors in near field. The rockbursts were simulated by means of large blasts detonated in solid rock close to the sidewall of a tunnel. The numerical models used in the design of the simulated rockbursts were calibrated by small blasts taking place at each experimental site. A dense array of shock type accelerometers was installed along the blasting wall to monitor the attenuation of the strong ground motion as a function of the distance from the source. The attenuation of the ground motion was found to be proportional to the distance from the source following R^-1.1 & R^-1.7 for compact rock and R^-3.1 & R^-3.4 for more fractured rock close to the surface of the tunnel. In addition the ground motion was compared to the quasi-static deformations taking place around the underground excavations. The quasi-static deformations were measured by means of strain, tilt and closure. A good correspondence

  13. Seasonal and spatial variations in microbial community structure and diversity in the acid stream draining across an ongoing surface mining site.

    Science.gov (United States)

    Tan, Gui-Liang; Shu, Wen-Sheng; Zhou, Wen-Hua; Li, Xiang-Li; Lan, Chong-Yu; Huang, Li-Nan

    2009-11-01

    This study examined the microbial community in an acidic stream draining across the Yun-Fu pyrite mine (Guangdong, China), where extremely acidic mine water is a persistent feature due to the intensive surface mining activities. Analysis of terminal restriction fragment length polymorphism (TRFLP) of 16S rRNA gene sequences showed that microbial populations varied spatially and seasonally and correlated with geochemical and physical conditions. After the stream moves from underground to the surface, the microbial community in the acidic water rapidly evolves into a distinct community close to that in the downstream storage pond. Comparisons of TRFLP peaks with sequenced clone libraries indicated that bacteria related to the recently isolated iron-oxidizer Ferrovum myxofaciens dominated the acidophilic community throughout the year except for the samples collected in spring from the storage pond, where Ferroplasma acidiphilum-like archaea represented the most abundant group. Acidithiobacillus ferrooxidans-affiliated organisms increased along the acid stream and remained common over the year, whereas Leptospirillum ferrooxidans-like bacteria were negligible or even not detected in the analyzed samples. The data indicate that changes in environmental conditions are accompanied by significant shifts in community structure of the prokaryotic assemblages at this opencast mining site.

  14. Mining Review

    Science.gov (United States)

    ,

    2013-01-01

    In 2012, the estimated value of mineral production increased in the United States for the third consecutive year. Production and prices increased for most industrial mineral commodities mined in the United States. While production for most metals remained relatively unchanged, with the notable exception of gold, the prices for most metals declined. Minerals remained fundamental to the U.S. economy, contributing to the real gross domestic product (GDP) at several levels, including mining, processing and manufacturing finished products. Minerals’ contribution to the GDP increased for the second consecutive year.

  15. Modes of occurrence of fluorine in the Late Paleozoic No. 6 coal from the Haerwusu Surface Mine, Inner Mongolia, China

    Energy Technology Data Exchange (ETDEWEB)

    Xibo Wang; Shifeng Dai; Yingying Sun; Dan Li; Weiguo Zhang; Yong Zhang; Yangbing Luo [China University of Mining and Technology, Beijing (China). State Key Laboratory of Coal Resources and Safe Mining

    2011-01-15

    The No. 6 coal from the Haerwusu Surface Mine, Inner Mongolia, China, is enriched in Al and Ga, which are valuable metal resources that could be extracted from fly ash. However, fluorine in the coal is unusually high (mean 286 {mu}g/g) and potentially toxic to the environment in the extraction process. In this paper, a sequential extraction/density separation procedure (SE/DS) was designed to examine the modes of occurrence of fluorine in the coal. The results show that fluorine extracted in distilled water, NH{sub 4}Ac (1 mol/l), and HCl (0.5%) leachates is low, and that in sulfide fraction is below the detection limit. The organic and silicate associations are inferred to account for more than 90% of the total fluorine in the coal. Boehmite and kaolinite are prime carriers of fluorine (the fluorine content in silicate fraction of the boehmite-enriched sample H-14 is up to 1906 {mu}g/g, and that of the kaolinite-enriched sample H-29 is 384 {mu}g/g). In bench samples H-2 and H-3, a minor amount of fluorine is related to goyazite. The relationship between fluorine and boehmite indicates that they were probably derived from the sediment source region, the weathered bauxite of the uplifted Benxi formation. 29 refs., 7 figs., 3 tabs.

  16. Application of Response Surface Methodology on Leaching of Iron from Partially Laterised Khondalite Rocks: A Bauxite Mining Waste

    Science.gov (United States)

    Swain, Ranjita; Bhima Rao, R.

    2017-08-01

    In the present investigation, response surface methodology (RSM) is used for a quadratic model that continuously controls the process parameters. This model is used to optimize the removal of iron oxide from Partially Laterised Khondalite (PLK) rocks which is influenced by several independent variables namely acid concentration, time and temperature. Second order response functions are produced for leaching of iron oxide from PLK rocks-a bauxite mining waste. In RSM, Box-Behnken design is used for the process optimization to achieve maximum removal of iron oxide. The influence of the process variables of leaching of iron oxide is presented in the form of 3-D response graphs. The results of this investigation reveals that 3 M hydrochloric acid concentration, 240 min time and 373 K temperature are found to be the best conditions for removal of 99% Fe2O3. The product obtain at this condition contain 80% brightness which is suitable for ceramic and filler industry applications. The novelity of the work is that the waste can be a value added product after suitable physical beneficiation and chemical treatment.

  17. Spatial distribution and source identification of heavy metals in surface soils in a typical coal mine city, Lianyuan, China.

    Science.gov (United States)

    Liang, Jie; Feng, Chunting; Zeng, Guangming; Gao, Xiang; Zhong, Minzhou; Li, Xiaodong; Li, Xin; He, Xinyue; Fang, Yilong

    2017-06-01

    In this study, we investigated the pollution degree and spatial distribution of heavy metals and determined their sources in topsoil in a typical coal mine city, Lianyuan, Hunan Province, China. We collected 6078 soil surface samples in different land use types. And the concentrations of Zn, Cd, Cu, Hg, Pb, Sb, As, Mo, V, Mn, Fe and Cr were measured. The average contents of all heavy metals were lower than their corresponding Grade II values of Chinese Soil Quality Standard with the exception of Hg. However, average contents of twelve heavy metals, except for Mn, exceeded their background level in soils in Hunan Province. Based on one-way analysis of variance (ANOVA), the contents of Cu, Zn, Cd, Pb, Hg, Mo and V were related to the anthropogenic source and there were statistically significant differences in their concentrations among different land use patterns. The spatial variation of heavy metal was visualized by GIS. The PMF model was used to ascertain contamination sources of twelve heavy metals and apportion their source contributions in Lianyuan soils. The results showed that the source contributions of the natural source, atmospheric deposition, industrial activities and agricultural activities accounted for 33.6%, 26.05%, 23.44% and 16.91%, respectively. Copyright © 2017 Elsevier Ltd. All rights reserved.

  18. Mineralogy and geochemistry of boehmite-rich coals: New insights from the Haerwusu Surface Mine, Jungar Coalfield, Inner Mongolia, China

    Science.gov (United States)

    Dai, S.; Li, D.; Chou, C.-L.; Zhao, L.; Zhang, Y.; Ren, D.; Ma, Y.; Sun, Y.

    2008-01-01

    Boehmite-rich coal of Pennsylvanian age was discovered earlier at the Heidaigou Surface Mine, Jungar Coalfield, Inner Mongolia, China. This paper reports new results on 29 bench samples of the no. 6 coal from a drill core from the adjacent Haerwusu Surface Mine, and provides new insights into the origin of the minerals and elements present. The results show that the proportion of inertinite in the no. 6 coal is higher than in other Late Paleozoic coals in northern China. Based on mineral proportions (boehmite to kaolinite ratio) and major element concentrations in the coal benches of the drill core, the no. 6 coal may be divided into five sections (I to V). Major minerals in Sections I and V are kaolinite. Sections II and IV are mainly kaolinite with a trace of boehmite, and Section III is high in boehmite. The boehmite is derived from bauxite in the weathered surface (Benxi Formation) in the sediment-source region. The no. 6 coal is rich in Al2O3 (8.89%), TiO2 (0.47%), Li (116????g/g), F (286????g/g), Ga (18????g/g), Se (6.1????g/g), Sr (350????g/g), Zr (268????g/g), REEs (172????g/g), Pb (30????g/g), and Th (17????g/g). The elements are classified into five associations by cluster analysis, i.e. Groups A, B, C, D, and E. Group A (ash-SiO2-Al2O3-Na2O-Li) and Group B (REE-Sc-In-Y-K2O-Rb-Zr-Hf-Cs-U-P2O5-Sr-Ba-Ge) are strongly correlated with ash yield and mainly have an inorganic affinity. The elements that are negatively or less strongly correlated with ash yield (with exceptions of Fe2O3, Be, V, and Ni) are grouped in the remaining three associations: Group C, Se-Pb-Hg-Th-TiO2-Bi-Nb-Ta-Cd-Sn; Group D, Co-Mo-Tl-Be-Ni-Sb-MgO-Re-Ga-W-Zn-V-Cr-F-Cu; and Group E, S-As-CaO-MnO-Fe2O3. Aluminum is mainly distributed in boehmite, followed by kaolinite. The high correlation coefficients of the Li-ash, Li-Al2O3, and Li-SiO2 pairs indicate that Li is related to the aluminosilicates in the coal. The boehmite-rich coal is high in gallium and F, which occur in boehmite and the

  19. Mineralogy and geochemistry of boehmite-rich coals: New insights from the Haerwusu Surface Mine, Jungar Coalfield, Inner Mongolia, China

    Energy Technology Data Exchange (ETDEWEB)

    Dai, Shifeng [State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Beijing 100083 (China); Department of Resources and Earth Science, China University of Mining and Technology, Beijing 100083 (China); Li, Dan; Zhao, Lei; Zhang, Yong; Ma, Yuwen; Sun, Yingying [Department of Resources and Earth Science, China University of Mining and Technology, Beijing 100083 (China); Chou, Chen-Lin [Illinois State Geological Survey (Emeritus), 615 East Peabody Drive, Champaign, IL 61820 (United States); Ren, Deyi [State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Beijing 100083 (China)

    2008-05-07

    Boehmite-rich coal of Pennsylvanian age was discovered earlier at the Heidaigou Surface Mine, Jungar Coalfield, Inner Mongolia, China. This paper reports new results on 29 bench samples of the no. 6 coal from a drill core from the adjacent Haerwusu Surface Mine, and provides new insights into the origin of the minerals and elements present. The results show that the proportion of inertinite in the no. 6 coal is higher than in other Late Paleozoic coals in northern China. Based on mineral proportions (boehmite to kaolinite ratio) and major element concentrations in the coal benches of the drill core, the no. 6 coal may be divided into five sections (I to V). Major minerals in Sections I and V are kaolinite. Sections II and IV are mainly kaolinite with a trace of boehmite, and Section III is high in boehmite. The boehmite is derived from bauxite in the weathered surface (Benxi Formation) in the sediment-source region. The no. 6 coal is rich in Al{sub 2}O{sub 3} (8.89%), TiO{sub 2} (0.47%), Li (116 {mu}g/g), F (286 {mu}g/g), Ga (18 {mu}g/g), Se (6.1 {mu}g/g), Sr (350 {mu}g/g), Zr (268 {mu}g/g), REEs (172 {mu}g/g), Pb (30 {mu}g/g), and Th (17 {mu}g/g). The elements are classified into five associations by cluster analysis, i.e. Groups A, B, C, D, and E. Group A (ash-SiO{sub 2}-Al{sub 2}O{sub 3}-Na{sub 2}O-Li) and Group B (REE-Sc-In-Y-K{sub 2}O-Rb-Zr-Hf-Cs-U-P{sub 2}O{sub 5}-Sr-Ba-Ge) are strongly correlated with ash yield and mainly have an inorganic affinity. The elements that are negatively or less strongly correlated with ash yield (with exceptions of Fe{sub 2}O{sub 3}, Be, V, and Ni) are grouped in the remaining three associations: Group C, Se-Pb-Hg-Th-TiO{sub 2}-Bi-Nb-Ta-Cd-Sn; Group D, Co-Mo-Tl-Be-Ni-Sb-MgO-Re-Ga-W-Zn-V-Cr-F-Cu; and Group E, S-As-CaO-MnO-Fe{sub 2}O{sub 3}. Aluminum is mainly distributed in boehmite, followed by kaolinite. The high correlation coefficients of the Li-ash, Li-Al{sub 2}O{sub 3}, and Li-SiO{sub 2} pairs indicate that Li is related to

  20. Fluvial transport and surface enrichment of arsenic in semi-arid mining regions: examples from the Mojave Desert, California

    Science.gov (United States)

    Kim, Christopher S.; Slack, David H.; Rytuba, James J.

    2012-01-01

    As a result of extensive gold and silver mining in the Mojave Desert, southern California, mine wastes and tailings containing highly elevated arsenic (As) concentrations remain exposed at a number of former mining sites. Decades of weathering and erosion have contributed to the mobilization of As-enriched tailings, which now contaminate surrounding communities. Fluvial transport plays an intermittent yet important and relatively undocumented role in the migration and dispersal of As-contaminated mine wastes in semi-arid climates. Assessing the contribution of fluvial systems to tailings mobilization is critical in order to assess the distribution and long-term exposure potential of tailings in a mining-impacted environment. Extensive sampling, chemical analysis, and geospatial mapping of dry streambed (wash) sediments, tailings piles, alluvial fans, and rainwater runoff at multiple mine sites have aided the development of a conceptual model to explain the fluvial migration of mine wastes in semi-arid climates. Intense and episodic precipitation events mobilize mine wastes downstream and downslope as a series of discrete pulses, causing dispersion both down and lateral to washes with exponential decay behavior as distance from the source increases. Accordingly a quantitative model of arsenic concentrations in wash sediments, represented as a series of overlapping exponential power-law decay curves, results in the acceptable reproducibility of observed arsenic concentration patterns. Such a model can be transferable to other abandoned mine lands as a predictive tool for monitoring the fate and transport of arsenic and related contaminants in similar settings. Effective remediation of contaminated mine wastes in a semi-arid environment requires addressing concurrent changes in the amounts of potential tailings released through fluvial processes and the transport capacity of a wash.

  1. Experiment on the treatment of acid mine drainage with optimized biomedical stone particles by response surface methodology.

    Science.gov (United States)

    Di, Junzhen; Wang, Mingxin; Zhu, Zhitao

    2018-03-01

    The immobilized particles were used to treat acid mine drainage (AMD) in the study, which owns the characteristics of serious pollution and high managing cost. The immobilized particles were prepared with sulfate reducing bacteria (SRB) and medical stones. In order to investigate the interactive influence of medical stones on the particle properties, the salt modification condition, content, and size of the medical stone were taken as the influential factors. At the same time, the removal rate of SO 4 2- and Mn 2+ , the release of total irons (TFe) and chemical oxygen demand (COD) and pH value were taken as the response values in the experiment. On the basis of the orthogonal experimental research, a response surface model was established. The experimental analysis showed that the particles can get the best treatment effect, when using the salt-modified medical stone with the content of 15% and particle size of 200~300 mesh. At this time, the removal rates of Mn 2+ and SO 4 2- in wastewater were 83.10 and 96.22%, respectively. The release contents of TFe and COD were 2.99 mg L -1 and 1828.54 mg L -1 , respectively, and the pH value was 7.05. Then, biological medical stone particles were prepared according to the optimal ratio in the response surface experiment. The adaptability of biomedical stone particles was studied at different concentrations of SO 4 2- , Mn 2+ and pH value. The results showed that the high concentration of SO 4 2- inhibited the metabolism of SRB, while Mn 2+ had a less effect. The biomedical stone particles could regulate pH value very well.

  2. Assessment of radioactive materials and heavy metals in the surface soil around uranium mining area of Tongliao, China.

    Science.gov (United States)

    Haribala; Hu, Bitao; Wang, Chengguo; Gerilemandahu; Xu, Xiao; Zhang, Shuai; Bao, Shanhu; Li, Yuhong

    2016-08-01

    Natural and artificial radionuclides and heavy metals in the surface soil of the uranium mining area of Tongliao, China, were measured using gamma spectrometry, flame atomic absorption spectrophotometry, graphite furnace atomic absorption spectrophotometry and microwave dissolution atomic fluorescence spectrometry respectively. The estimated average activity concentrations of (238)U, (232)Th, (226)Ra, (40)K and (137)Cs are 27.53±16.01, 15.89±5.20, 12.64±4.27, 746.84±38.24 and 4.23±4.76Bq/kg respectively. The estimated average absorbed dose rate in the air and annual effective dose rate are 46.58±5.26nGy/h and 57.13±6.45μSv, respectively. The radium equivalent activity, external and internal hazard indices were also calculated and their mean values are within the acceptable limits. The heavy metal concentrations of Pb, Cd, Cu, Zn, Hg and As from the surface soil were measured and their health risks were then determined. Although the content of Cd is much higher than the average background in China, its non-cancer and cancer risk indices are all within the acceptable ranges. These calculated hazard indices to estimate the potential radiological health risk in soil and the dose rate are well below their permissible limit. In addition the correlations between the radioactivity concentrations of the radionuclides and the heavy metals in soil were determined by the Pearson linear coefficient. Copyright © 2016 Elsevier Inc. All rights reserved.

  3. Rescue complex for coal mines

    Science.gov (United States)

    Yungmeyster, D. A.; Urazbakhtin, R. Yu

    2017-10-01

    The mining industry was potentially dangerous at all times, even with the use of modern equipment in mines, accidents continue to occur, including catastrophic ones. Accidents in mines are due to the presence of specific features in the conduct of mining operations. These include the inconsistency of mining and geological conditions, the contamination of the mine atmosphere due to the release of gases from minerals, the presence of self-igniting coal strata, which creates the danger of underground fires, gas explosions. The main cause of accidents is the irresponsibility of both the manager and the personnel who violate the safety rules during mining operations.

  4. Uranium mills and mines environmental restoration in Spain

    International Nuclear Information System (INIS)

    Perez Estevez, C.; Lozano Martinez, F.

    2000-01-01

    ENRESA and ENUSA have dismantled and restored a uranium mill in Andujar (Andalucia), a uranium facility based on open pit mining and plant in La Haba (Extremadura) and 19 old uranium mines in Andalucia and Extremadura. The Andujar Uranium Mill was operated from 1959 to 1981 and has been restorated between 1991 and 1994. The site included the tailings pile and the processing plant. The Haba Uranium Site included the Plant (operating from 1976 to 1999), four open-pit mines (operating from 1966 to 1990), the heaps leaching and the tailings dam and has been restorated between 1992 and 1997. The 19 abandoned uranium mines were developed by underground mining with the exception of two sites, which were operated by open pit mining. Mining operations started around 1959 and were shutdown in 1981. There was a great diversity among the mines, in terms of site conditions. Whereas in some sites there was little trace of the mining works, in other sites large excavations, mining debris piles, abandoned shafs and galeries and remaining surface structures and equipment were encountered. (author)

  5. Land-restoration provisions of the Surface Mining Control and Reclamation Act: constitutional considerations

    Energy Technology Data Exchange (ETDEWEB)

    Eichbaum, W.M.; Buente, D.T.

    1980-01-01

    This examination of the land-capability requirements of SMCRA rested upon the proposition that a proper application of constitutional principles requires an appreciation of changing national conditions. Accordingly, this article examined the possible Fifth and Tenth Amendment challenges to SMCRA's land-capability provisions in the context of an evolving history of national concern over natural resources and in light of lengthy congressional deliberations based on concern for future national environmental and energy needs. The analysis suggests that SMCRA's land-capability requirements are well within the constitutional authority of the national government. The history of environmental protection legislation in the 1970's suggests that Federal action will increasingly impose regulatory restraints on the use of privately-owned natural resources. This trend is meeting strong resistance, including varied demands to reduce the impact and scope of Federal regulation. While the conclusion may be limited to SMCRA, its approach to examining constitutional challenges to Federal regulation protecting natural resources can be broadly applied. Natural resources are essential, finite, and irrevocably threatened by human activity. In the absence of effective state action, Federal protective action to provide national management of those resources is necessary and consistent with constitutional principles. 184 references.

  6. Single-molecule conductivity of non-redox and redox molecules at pure and gold-mined Au(111)-electrode surfaces

    DEFF Research Database (Denmark)

    Zhang, Jingdong; Chi, Qijin; Ulstrup, Jens

    media supported by comprehensive theoretical frames, have emerged as core approaches in these exciting areas. Single-molecule redox electrochemistry is rooted in two major areas. One is the preparation of well-defined (atomically planar) electrode surfaces modified by molecular monolayers (SAMs). High...... to surface-mined Au-atoms. In addition the SAMs ensure protein/enzyme immobilization gentle enough that the proteins retain electron transfer or enzyme activity in a variety of local environments. The second area is the mapping and control of the immobilized redox molecules and metalloproteins themselves...

  7. Evaluation of environment benefits based on new-type mining of coal resources

    Science.gov (United States)

    Xu, Futong; Ren, Zaixiang

    2017-08-01

    According to the energy structure characteristics in China, this paper analyzed the current situation of liquefaction and gasification exploitation of coal as an emerging mining method. Simultaneously, setting the UCG (UCG) as an example, this paper analyzed the factors impacting the new-type mining method of coal resources and the mining damages, obtaining that the main damages of UCG include surface subsidence, groundwater pollution and other pollution. This paper, which proposed to evaluate the environmental benefits of the new-type mining method, established a evaluation system of environmental benefits of UCG and adopted fuzzy comprehensive evaluation, obtaining four-class comprehensive evaluation indexes of the new-type mining method.

  8. Environmental impacts of mining: monitoring, restoration and control

    Energy Technology Data Exchange (ETDEWEB)

    Sengupta, M.

    1993-01-01

    Contains 12 chapters with the following titles: mining and the environment; surface coal mining with reclamation; reclamation and revegetation of mined land; the acid mine drainage problem from coal mines; acid rock drainage and metal migration; hydrologic impact; erosion and sediment control; wetlands; blasting; mining subsidence; postmining land use; environmental effects of gold heap-leaching operations.

  9. Mine Waste at The Kherzet Youcef Mine : Environmental Characterization

    Science.gov (United States)

    Issaad, Mouloud; Boutaleb, Abdelhak; Kolli, Omar

    2017-04-01

    Mining activity in Algeria has existed since antiquity. But it was very important since the 20th century. This activity has virtually ceased since the beginning of the 1990s, leaving many mine sites abandoned (so-called orphan mines). The abandonment of mining today poses many environmental problems (soil pollution, contamination of surface water, mining collapses...). The mining wastes often occupy large volumes that can be hazardous to the environment and human health, often neglected in the past: Faulting geotechnical implementation, acid mine drainage (AMD), alkalinity, presence of pollutants and toxic substances (heavy metals, cyanide...). The study started already six years ago and it covers all mines located in NE Algeria, almost are stopped for more than thirty years. So the most important is to have an overview of all the study area. After the inventory job of the abandoned mines, the rock drainage prediction will help us to classify sites according to their acid generating potential.

  10. Detection and Monitoring of Surface Motions in Active Open Pit Iron Mine in the Amazon Region, Using Persistent Scatterer Interferometry with TerraSAR-X Satellite Data

    Directory of Open Access Journals (Sweden)

    Marcos E. Hartwig

    2013-09-01

    Full Text Available Persistent Scatterer interferometry (PSI represents a powerful tool for the detection and monitoring of tiny surface deformations in vast areas, allowing a better understanding of its triggering mechanisms, planning of mitigation measures, as well as to find better solutions for social and environmental issues. However, there is no record hitherto of its use in active open pit mine in tropical rainforest environment. In this paper we evaluate the use of the PSI technique for the detection and monitoring of mine slope deformations in the N4W iron mine and its surroundings, Pará State, Northern Brazil. The PSI processing was performed with 18 ascending SAR scenes of the TerraSAR-X satellite acquired in the dry season of 2012. The results showed a significant number of widely distributed persistent scatterers. It was observed that most of the study area was stable during the time span. Nevertheless, high deformation rates (312 mm/year were mapped over the mine waste piles, but do not offer any hazard, since they are expected displacements of meters in magnitude for these manmade land structures. Additionally, it was mapped tiny deformation rates in both the east and west flanks of pits 1 and 2. The main underlying reasons can be assigned to the accommodation phenomena of very poor rock masses, to the local geometric variations of the slope cuts, to the geological contact between ironstones and the country rocks, to the exploitation activities, as well as to the major geological structures. This study showed the applicability of the PSI technique using TerraSAR-X scenes in active open pit mines in tropical moist environment. However, the PSI technique is not capable in providing real-time warnings, and faces limitations due to SAR viewing geometry. In this sense, we strongly recommend the use of radar scenes acquired in both ascending and descending orbits, which would also provide a more complete understanding of the deformation patterns.

  11. Methane emissions from coal mining

    International Nuclear Information System (INIS)

    Boyer, C.M.; Kelafant, J.R.; Kuuskraa, V.A.; Manger, K.C.; Kruger, D.

    1990-09-01

    The report estimates global methane emissions from coal mining on a country specific basis, evaluates the technologies available to degasify coal seams and assesses the economics of recovering methane liberated during mining. 33 to 64 million tonnes were liberated in 1987 from coal mining, 75 per cent of which came from China, the USSR, Poland and the USA. Methane emissions from coal mining are likely to increase. Emission levels vary between surface and underground mines. The methane currently removed from underground mines for safety reasons could be used in a number of ways, which may be economically attractive. 55 refs., 19 figs., 24 tabs

  12. Final environmental impact statement. Marquez uranium mine

    International Nuclear Information System (INIS)

    1984-01-01

    As one of many activities TVA has undertaken to ensure an adequate supply of uranium for these plants, TVA has proposed to underground mine, through its operator, the uranium deposits located in the Canon de Marquez in McKinley County, New Mexico. Construction and operation of the underground mine would be expected to have the following environmental effects: (a) a temporary change in land use for 48.5 hectares from wildlife habitat and recreation to mineral extraction; (b) a minor alteration in topography near the proposed pond sites due to reclamation of waste rock piles; (c) minimal impacts on land due to limited vehicular traffic and road construction; (d) temporary depression of ground water levels in the Westwater Canyon Member of the Morrison Formation in the mine vicinity during mine life; (e) short-term project-induced impacts to surface water and shallow ground water quality; (f) a temporary decrease in air quality in the vicinity of the mining operations due to fugitive dust and exhaust emissions from combustion-driven mining and support vehicles and releases of radon and short-lived radon progeny from ventilation shafts and ore piles; (g) a temporary decrease of plant and animal species at the mine site; (h) a minor and temporary effect on aquatic systems downstream from the mine and settling ponds due to sedimentation; and (i) a minor increase of noise levels in the immediate vicinity of mine shafts and vents. The no action alternative and alternatives for securing uranium ore by other methods were considered but were found insufficient to meet TVA objectives. None of the alternatives explored were environmentally preferable. TVA also evaluated site specific alternatives including the following: different shaft and support building siting, mining techniques, and reclamation options. 25 figures, 20 tables

  13. Environmental consequences of the Retsof Salt Mine roof collapse

    Science.gov (United States)

    Yager, Richard M.

    2013-01-01

    In 1994, the largest salt mine in North America, which had been in operation for more than 100 years, catastrophically flooded when the mine ceiling collapsed. In addition to causing the loss of the mine and the mineral resources it provided, this event formed sinkholes, caused widespread subsidence to land, caused structures to crack and subside, and changed stream flow and erosion patterns. Subsequent flooding of the mine drained overlying aquifers, changed the groundwater salinity distribution (rendering domestic wells unusable), and allowed locally present natural gas to enter dwellings through water wells. Investigations including exploratory drilling, hydrologic and water-quality monitoring, geologic and geophysical studies, and numerical simulation of groundwater flow, salinity, and subsidence have been effective tools in understanding the environmental consequences of the mine collapse and informing decisions about management of those consequences for the future. Salt mines are generally dry, but are susceptible to leaks and can become flooded if groundwater from overlying aquifers or surface water finds a way downward into the mined cavity through hundreds of feet of rock. With its potential to flood the entire mine cavity, groundwater is a constant source of concern for mine operators. The problem is compounded by the viscous nature of salt and the fact that salt mines commonly lie beneath water-bearing aquifers. Salt (for example halite or potash) deforms and “creeps” into the mined openings over time spans that range from years to centuries. This movement of salt can destabilize the overlying rock layers and lead to their eventual sagging and collapse, creating permeable pathways for leakage of water and depressions or openings at land surface, such as sinkholes. Salt is also highly soluble in water; therefore, whenever water begins to flow into a salt mine, the channels through which it flows increase in diameter as the surrounding salt dissolves

  14. Water treatment strategy for underground and surface waters in order to reduce the hydro-network contamination due to close out of a uranium mining area in Romania

    International Nuclear Information System (INIS)

    Georgescu, D.; Radulescu, C.

    1999-01-01

    Under the present circumstances, in correlation with the national nuclear program and strategy, it is foreseen to stop the exploitation activities in two important uranium mining areas from Romania. This close-out action is involving a number of technical decisions for environmental restoration. Reduction of waters radioactive contamination in these zones, both during the operating period and after the closeout period, is one of the main components of the environment rehabilitation strategy. In this paper there are presented the today situation and the program foreseen for ground and surface water treatment at an uranium mining unit situated in the SW side of Romania, program based on the results of our own research carried out to decrease the content of pollutant radioactive elements. (author)

  15. Research status and future trends on surface pre-grouting technology in reforming wall rock of vertical shafts in coal mines in China

    Science.gov (United States)

    Wang, Hua

    2018-02-01

    In the mine construction, the surface pre-grouting technology is an important method to prevent water blast in excavation process of vertical shaft when the shaft must pass through the thick, water-rich and high water-pressure bedrock aquifer. It has been nearly 60 years since the technology was used to reform wall rock of vertical shaft in coal mine in China for the first time, and the existing technology can basically meet the needs of constructing 1000m deep vertical shaft. Firstly, the article introduces that in view of Magg’s spherical seepage theory and Karol’s spherical seepage theory, Chinese scholars found that the diffusion of grout from borehole into the surrounding strata in horizontal direction is irregular through a lot of research and engineering practice of using the surface pre-grouting technology to reform wall rock of vertical shafts, and put forward the selecting principles of grout’s effective diffusion radius in one grouting engineering; Secondly, according to the shape of the grouting boreholes, surface pre-grouting technology of vertical shaft is divided into two stages: vertical borehole stage and S-type borehole stage. Thirdly, the development status of grouting materials and grouting equipment for the technology is introduced. Fourthly, grouting mode, stage height and pressure of the technology are introduced. Finally, it points out that with the increasing depth of coal mining in China, the technology of reforming wall rock of 1000~2000m deep vertical shafts will face many problems, such as grouting theory, grouting equipment, grouting finishing standard, testing and evaluation of grouting effect, and so on. And it put forward a preliminary approach to solving these problems. This paper points out future research directions of the surface pre-grouting technology in China.

  16. Upper Crustal Shear Structure of NE Wyoming Inverted by Regional Surface Waves From Mining Explosions-Comparison of Niching Genetic Algorithms and Least-Squares Inversion

    Science.gov (United States)

    Zhou, R.; Stump, B. W.

    2001-12-01

    Surface-wave dispersion analysis of regional seismograms from mining explosion is used to extract shallow subsurface structural models. Seismograms along a number of azimuths were recorded at near-regional distances from mining explosions in Northeast Wyoming. The group velocities of fundamental mode Rayleigh wave were determined by using the Multiple Filter Analysis (MFA) and refined by Phase Matched Filtering (PMF) technique. The surface wave dispersion curves covered the period range of 2 to 12 sec and the group-velocities range from 1.3 to 2.9 km/sec. Besides least-squares inversion, a niching genetic algorithm (NGA) was introduced for crustal shear-wave velocity inversion. Niching methods are techniques specifically to maintain diversity and promote the formation and maintenance of stable sub-populations in the tradition genetic algorithm. This methodology identifies multiple candidate solutions when applied to both multimodal optimization and classification problems. Considering the nonuniqueness of inversion problem, the capacity of NGA is explored to retrieve classes of S-wave velocity structural profiles from the dispersion curves. Synthetic tests illustrate the range of nonuniqueness in linear surface wave inversion problems. Application of this new technique to regional surface wave observations from the Powder River Basin provides classes of models from which the one that is most consistent with geologic constraints can be chosen.

  17. 36 CFR 6.7 - Mining wastes.

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 1 2010-07-01 2010-07-01 false Mining wastes. 6.7 Section 6... DISPOSAL SITES IN UNITS OF THE NATIONAL PARK SYSTEM § 6.7 Mining wastes. (a) Solid waste from mining includes but is not limited to mining overburden, mining byproducts, solid waste from the extraction...

  18. Statistical investigation of surface bound ions and further development of BION server to include pH and salt dependence.

    Science.gov (United States)

    Petukh, Marharyta; Zhang, Min; Alexov, Emil

    2015-12-15

    Ions are engaged in multiple biological processes in cells. By binding to the macromolecules or being mobile in the solvent, they maintain the integrity of the structure of macromolecules; participate in their enzymatic activity; or screen electrostatic interactions. While experimental methods are not always able to assign the exact location of ions, computational methods are in demand. Although the majority of computational methods are successful in predicting the position of ions buried inside macromolecules, they are less effective in deciphering positions of surface bound ions. Here, we propose the new BION algorithm (http://compbio.clemson.edu/bion_server_ph/) that predicts the location of the surface bound ions. It is more efficient and accurate compared to the previous version since it uses more advanced clustering algorithm in combination with pairing rules. In addition, the BION webserver allows specifying the pH and the salt concentration in predicting ions positions. © 2015 Wiley Periodicals, Inc.

  19. Abandoned Uranium Mine (AUM) Trust Mine Points, Navajo Nation, 2016, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — This GIS dataset contains point features that represent mines included in the Navajo Environmental Response Trust. This mine category also includes Priority mines....

  20. Mining technology and policy issues 1983

    International Nuclear Information System (INIS)

    Anon.

    1983-01-01

    This book presents conference papers on advances in mineral processing, coal mining, communications for mining executives, environmental laws and regulations, exploration philosophy, exploration technology, government controls and the environment, management, mine finance, minerals availability, mine safety, occupational health, open pit mining, the precious metals outlook, public lands, system improvements in processing ores, and underground mining. Topics considered include coal pipelines and saline water, an incentive program for coal mines, sandwich belt high-angle conveyors, the development of a mining company, regulations for radionuclides, contracts for western coal production for Pacific Rim exports, and the control of radon daughters in underground mines

  1. Measuring evapotranspiration: comparison of in situ micrometeorological methods including eddy covariance, scintillometer, Bowen ratio, and surface renewal method

    Science.gov (United States)

    Poznikova, G.; Fischer, M.; Orsag, M.; Trnka, M.

    2016-12-01

    Quantifying evapotranspiration (ET) is a challenging task as different methods can induce large discrepancies. Comparisons of various techniques are not rare, however it is demanding to maintain several in situ measurements for longer time. In our study, we aimed to compare four micrometeorological methods measuring ET at relatively large homogeneous area. The study took place on a winter wheat field in Polkovice, the Czech Republic (49°23'42.8"N 17°14'47.3"E) from Jul 1st 2015 until Sep 15th 2015. In the centre of 26-ha experimental field we deployed the eddy covariance (EC) system, the Bowen ratio energy balance (BREB) system, thermocouples for surface renewal technique, and the surface layer scintillometer with 106 m path length. Additionally, we installed the large aperture scintillometer with 617 m path length across the field. Our results showed good agreement of compared methods during the wetter periods of the measurements with slight overestimation of the scintillometry. The BREB method agreed the best with EC. Both scintillometers gave very consistent results throughout the whole measurement period. The EC tended to underestimate other methods. One of potential reasons is energy balance disclosure which reached 27.4 % for the measured period. The surface renewal method showed good potential however, need to be further tested in our conditions. Our experimental locality is one of several we are running as a part of ground based measurement network for ET estimation. Gained results helped us to enhance and optimise our network to ensure effective and reliable data acquisition for future validation of airborne images (satellite based drought monitoring).

  2. Total and labile metals in surface sediments of the tropical river-estuary system of Marabasco (Pacific coast of Mexico): Influence of an iron mine.

    Science.gov (United States)

    Marmolejo-Rodríguez, Ana Judith; Prego, Ricardo; Meyer-Willerer, Alejandro; Shumilin, Evgueni; Cobelo-García, Antonio

    2007-01-01

    Marabasco is a tropical river-estuary system comprising the Marabasco river and the Barra de Navidad Lagoon. The river is impacted by the Peña Colorada iron mine, which produces 3.5 million tons of pellets per year. Thirteen surface sediment samples were collected in May 2005 (dry season) in order to establish background levels of Al, Cd, Co, Cu, Fe, Ni, Pb, and Zn in the system and to ascertain the potential mobility of metals in the sediments. Analyses were carried out in the fraction finer than 63 microm, and labile metals extracted according the BCR procedure. Certified reference materials were used for validation of methods. Total concentrations of Cd, Co, Cu, Ni, Pb, and Zn were in the range of 0.05-0.34, 6-95, 0.7-31, 9-26, 2-18, and 53-179 mgkg(-1), respectively; Al and Fe ranges of 24-127, and 26-69 mgg(-1) correspondingly. Cadmium was found to be significantly labile in the sediments (20-100%), followed by Co (0-35%), Ni (3-16%) and Zn (0-25%), whereas the labile fraction for Cu, Fe and Pb was almost negligible (iron mine on the Marabasco system is lower than expected when compared with other similar World systems influenced by mining activities.

  3. Weighting Criteria and Prioritizing of Heat stress indices in surface mining using a Delphi Technique and Fuzzy AHP-TOPSIS Method.

    Science.gov (United States)

    Asghari, Mehdi; Nassiri, Parvin; Monazzam, Mohammad Reza; Golbabaei, Farideh; Arabalibeik, Hossein; Shamsipour, Aliakbar; Allahverdy, Armin

    2017-01-01

    Heat stress as a physical harmful agent can increase the risk of health and safety problems in different workplaces such as mining. Although there are different indices to assess the heat stress imposed on workers, choosing the best index for a specific workplace is so important. Since various criteria affect an index applicability, extracting the most effective ones and determining their weights help to prioritize the existing indices and select the optimal index. In order to achieve this aim, present study compared some heat stress indices using effective methods. The viewpoints of occupational health experts and the qualitative Delphi methods were used to extract the most important criteria. Then, the weights of 11 selected criteria were determined by Fuzzy Analytic Hierarchy Process. Finally, fuzzy TOPSIS technique was applied for choosing the most suitable heat stress index. According to result, simplicity, reliability, being low cost, and comprehensiveness were the most determinative criteria for a heat stress index. Based on these criteria and their weights, the existing indices were prioritized. Eventually, wet bulb glob temperature appropriated the first priority and it was proposed as an applicable index for evaluating the heat stress at outdoor hot environments such as surface mines. The use of these strong methods allows introducing the most simple, precise, and applicable tool for evaluation the heat stress in hot environments. It seems that WBGT acts as an appropriate index for assessing the heat stress in mining activities at outdoors.

  4. Near-Surface Sensing of Vegetative Heavy Metal Stress: Method Development for an Accelerated Assessment of Mine Tailing Waste and Remediation Efforts

    Science.gov (United States)

    Lee, M. T.; Gottfried, M.; Berglund, E.; Rodriguez, G.; Ceckanowicz, D. J.; Cutter, N.; Badgeley, J.

    2014-12-01

    The boom and bust history of mineral extraction in the American southwest is visible today in tens of thousands of abandoned and slowly decaying mine installations that scar the landscape. Mine tailing piles, mounds of crushed mineral ore, often contain significant quantities of heavy metal elements which may leach into surrounding soils, surface water and ground water. Chemical analysis of contaminated soils is a tedious and time-consuming process. Regional assessment of heavy metal contamination for treatment prioritization would be greatly accelerated by the development of near-surface imaging indices of heavy-metal vegetative stress in western grasslands. Further, the method would assist in measuring the ongoing effectiveness of phytoremedatian and phytostabilization efforts. To test feasibility we ground truthed nine phytoremediated and two control sites sites along the mine-impacted Kerber Creek watershed in Saguache County, Colorado. Total metal concentration was determined by XRF for both plant and soil samples. Leachable metals were extracted from soil samples following US EPA method 1312. Plants were identified, sorted into roots, shoots and leaves, and digested via microwave acid extraction. Metal concentrations were determined with high accuracy by ICP-OES analysis. Plants were found to contain significantly higher concentrations of heavy metals than surrounding soils, particularly for manganese (Mn), iron (Fe), copper (Cu), zinc (Zn), barium (Ba), and lead (Pb). Plant species accumulated and distributed metals differently, yet most showed translocation of metals from roots to above ground structures. Ground analysis was followed by near surface imaging using an unmanned aerial vehicle equipped with visible/near and shortwave infrared (0.7 to 1.5 μm) cameras. Images were assessed for spectral shifts indicative of plant stress and attempts made to correlate results with measured soil and plant metal concentrations.

  5. Radiation-curing of acrylate composites including carbon fibres: A customized surface modification for improving mechanical performances

    International Nuclear Information System (INIS)

    Martin, Arnaud; Pietras-Ozga, Dorota; Ponsaud, Philippe; Kowandy, Christelle; Barczak, Mariusz; Defoort, Brigitte; Coqueret, Xavier

    2014-01-01

    The lower transverse mechanical properties of radiation-cured acrylate-based composites reinforced with carbon-fibre with respect to the thermosettable analogues was investigated from the viewpoint of chemical interactions at the interface between the matrix and the carbon material. XPS analysis of representative commercial carbon fibres revealed the presence of a significant amount of chemical functions potentially exerting an adverse effect on the initiation and propagation of the free radical polymerization initiated under high energy radiation. The EB-induced polymerization of n-butyl acrylate as a simple model monomer was conducted in the presence of various aromatic additives exhibiting a strong inhibiting effect, whereas thiols efficiently sensitize the initiation mechanism and undergo transfer reactions. A method based on the surface modification of sized fibres by thiomalic acid is proposed for overcoming the localized inhibition phenomenon and for improving the mechanical properties of the resulting acrylate-based composites. - Highlights: • Surface functions of C-fibres are analyzed for their effect on radical reaction. • Irradiation of nBu-acrylate in presence of aromatic additives reveals inhibition. • Thiol groups sensitize the radiation-initiated polymerization of nBu-acrylate. • Modification of C-fibres with thiomalic acid enhances composite properties

  6. Mining collapse monitoring with SAR imagery data: a case study of Datong mine, China

    Science.gov (United States)

    Zhao, Chaoying; Lu, Zhong; Zhang, Qin; Yang, Chengsheng; Zhu, Wu

    2014-01-01

    A mining-induced collapse is often characterized by large deformation gradient, spatial discontinuity, and temporal nonlinearity, resulting in the loss of interferometric SAR (InSAR) coherence and consequently subsidence information in areas of steep deformation gradients. In this study, we present different SAR deformation monitoring schemes to map the mining-induced subsidence and collapse. First, SAR data with different wavelengths, including C-band ERS-1, C-band Envisat ASAR, and X-band TerraSAR-X data, are used to highlight three mining subsidence stages and their temporal evolutions over Datong mine (China) in the past 20 years. Mining-induced subsidence over a region can be delimited from InSAR deformation maps, where InSAR coherence is lost over the area of peak subsidence. Second, in order to monitor the large-gradient surface deformation caused by underground mining activities, three SAR deformation monitoring schemes are proposed, including a full-resolution interferogram method, a "remove-restore" phase unwrapping method, and a fusion of phase and offset measurements. Then, taking the Datong coalfield as an example, we demonstrate the capabilities of these methods on mapping large-gradient deformation. Finally, we have found that over 80% of coalfields have deformed during the past 20 years. We conclude that the fusion of the InSAR phase and offset measurements can provide a reliable estimate of large-gradient mining-induced deformation.

  7. Management of the water balance and quality in mining areas

    Science.gov (United States)

    Pasanen, Antti; Krogerus, Kirsti; Mroueh, Ulla-Maija; Turunen, Kaisa; Backnäs, Soile; Vento, Tiia; Veijalainen, Noora; Hentinen, Kimmo; Korkealaakso, Juhani

    2015-04-01

    Although mining companies have long been conscious of water related risks they still face environmental management problems. These problems mainly emerge because mine sites' water balances have not been adequately assessed in the stage of the planning of mines. More consistent approach is required to help mining companies identify risks and opportunities related to the management of water resources in all stages of mining. This approach requires that the water cycle of a mine site is interconnected with the general hydrologic water cycle. In addition to knowledge on hydrological conditions, the control of the water balance in the mining processes require knowledge of mining processes, the ability to adjust process parameters to variable hydrological conditions, adaptation of suitable water management tools and systems, systematic monitoring of amounts and quality of water, adequate capacity in water management infrastructure to handle the variable water flows, best practices to assess the dispersion, mixing and dilution of mine water and pollutant loading to receiving water bodies, and dewatering and separation of water from tailing and precipitates. WaterSmart project aims to improve the awareness of actual quantities of water, and water balances in mine areas to improve the forecasting and the management of the water volumes. The study is executed through hydrogeological and hydrological surveys and online monitoring procedures. One of the aims is to exploit on-line water quantity and quality monitoring for the better management of the water balances. The target is to develop a practical and end-user-specific on-line input and output procedures. The second objective is to develop mathematical models to calculate combined water balances including the surface, ground and process waters. WSFS, the Hydrological Modeling and Forecasting System of SYKE is being modified for mining areas. New modelling tools are developed on spreadsheet and system dynamics platforms to

  8. Environmental impact of mining activities in the Lousal area (Portugal): chemical and diatom characterization of metal-contaminated stream sediments and surface water of Corona stream.

    Science.gov (United States)

    Luís, Ana Teresa; Teixeira, Paula; Almeida, Salomé Fernandes Pinheiro; Matos, João Xavier; da Silva, Eduardo Ferreira

    2011-09-15

    Lousal mine is a typical "abandoned mine" with all sorts of problems as consequence of the cessation of the mining activity and lack of infrastructure maintenance. The mine is closed at present, but the heavy metal enriched tailings remain at the surface in oxidizing conditions. Surface water and stream sediments revealed much higher concentrations than the local geochemical background values, which the "Contaminated Sediment Standing Team" classifies as very toxic. High concentrations of Cu, Pb, Zn, As, Cd and Hg occurred within the stream sediments downstream of the tailings sites (up to: 817 mg kg(-1) As, 6.7 mg kg(-1) Cd, 1568 mg kg(-1) Cu, 1059 mg kg(-1) Pb, 82.4 mg kg(-1) Sb, 4373 mg kg(-1) Zn). The AMD waters showed values of pH ranging from 1.9 to 2.9 and concentrations of 9249 to 20,700 mg L(-1) SO(4)(-2), 959 to 4830 mg L(-1) Fe and 136 to 624 mg L(-1) Al. Meanwhile, the acid effluents and mixed stream waters also carried high contents of SO(4)(2-,) Fe, Al, Cu, Pb, Zn, Cd, and As, generally exceeding the Fresh Water Aquatic Life Acute Criteria. Negative impacts in the diatom communities growing at different sites along a strong metal pollution gradient were shown through Canonical Correspondence Analysis: in the sites influenced by Acid Mine Drainage (AMD), the dominant taxon was Achnanthidium minutissimum. However, Pinnularia acoricola was the dominant species when the environmental conditions were extremely adverse: very low pH and high metal concentrations (sites 2 and 3). Teratological forms of Achnanthidium minutissimum (Kützing) Czarnecki, Brachysira vitrea (Grunow) Ross in Hartley, Fragilaria rumpens (Kützing) G. W. F. Carlson and Nitzschia hantzschiana Rabenhorst were found. A morphometric study of B. vitrea showed that a decrease in size was evident at the most contaminated sites. These results are evidence of metal and acidic pollution. Copyright © 2011 Elsevier B.V. All rights reserved.

  9. Potential effects of surface coal mining on the hydrology of the Circle West coal tracts, McCone County, eastern Montana

    Science.gov (United States)

    Cannon, M.R.

    1984-01-01

    The Circle West coal tracts in McCone County, Montana, contain about 460 million tons of recoverable coal reserves. Estimates of coal reserves for the tract are based predominantly on the S coal bed, which averages about 16 ft in thickness. About 175 million tons, or 38%, of the recoverable coal is Federally owned and has been identified for potential lease sale. A hydrologic study has been conducted in the potential lease area to describe existing hydrologic systems and to assess potential effects of surface coal mining on local water resources. Geohydrologic data collected from wells and drill holes indicate that shallow aquifers exist in sandstone and coal beds of the Tongue River Member of the Fort Union Formation (Paleocene age). These shallow aquifers generally have small values of hydraulic conductivity (0.1 to 380 ft/day) and typically yield from 2 to 20 gal/min to stock and domestic wells. Where coal is extremely fractured or the thickness of saturated sandstone is large, some wells can yield in excess of 70 gal/min. Chemical analyses indicate that most shallow aquifers contain a sodium sulfate bicarbonate type water. Surface water resources of the area consist of intermittent streamflow in parts of the Nelson and Timber Creek basins plus a large network of reservoirs. The reservoirs provide a large part of the water supply for area livestock and irrigation. Water quality data for Nelson and Timber Creeks indicate that the water generally is a sodium sulfate type and has a large concentration (181 to 6,960 mg/L) of dissolved solids. Mining of the S coal bed in the Circle West coal tracts would permanently remove shallow coal and sandstone aquifers, resulting in the loss of shallow stock wells. Mining would destroy livestock reservoirs, alter runoff characteristics of Nelson Creek, and temporarily lower water levels in shallow aquifers near the mine. Leaching of soluble constituents from mine spoils may cause a long-term degradation of the quality of water

  10. A neural network potential energy surface for the F + CH4reaction including multiple channels based on coupled cluster theory.

    Science.gov (United States)

    Chen, Jun; Xu, Xin; Liu, Shu; Zhang, Dong H

    2018-03-22

    We report here a new global and full dimensional potential energy surface (PES) for the F + CH4 reaction. This PES was constructed by using neural networks (NN) fitting to about 99 000 ab initio energies computed at the UCCSD(T)-F12a/aug-cc-pVTZ level of theory, and the correction terms considering the influence of a larger basis set as well as spin-orbit couplings were further implemented with a hierarchial scheme. This PES, covering both the abstraction and substitution channels, has an overall fitting error of 8.24 meV in total, and 4.87 meV for energies within 2.5 eV using a segmented NN fitting method, and is more accurate than the previous PESs.

  11. Gold-Mining

    DEFF Research Database (Denmark)

    Raaballe, J.; Grundy, B.D.

    2002-01-01

    of operating gold mines. Asymmetric information on the reserves in the mine implies that, at a high enough price of gold, the manager of high type finds the extraction value of the company to be higher than the current market value of the non-operating gold mine. Due to this under valuation the maxim of market...... value maximization forces the manager of high type to extract the gold.The implications are three-fold. First, all managers (except the lowest type) extract the gold too soon compared to the first-best policy of leaving the gold in the mine forever. Second, a manager of high type extracts the gold......  Based on standard option pricing arguments and assumptions (including no convenience yield and sustainable property rights), we will not observe operating gold mines. We find that asymmetric information on the reserves in the gold mine is a necessary and sufficient condition for the existence...

  12. INCREASING THE EFFICIENCY OF THE TRAINING PROGRAMS FOR THE MINE RESCUE TEAMS

    Directory of Open Access Journals (Sweden)

    CRISTIAN COSTA

    2014-10-01

    Full Text Available Mining laws in developed countries require trained, equipped mine rescue personnel to be available at all mining operations at surface and underground mining operations. Mine rescue teams must know the procedures used to rescue miners trapped by various hazards, including fire, explosions, cave-ins, toxic gas, smoke inhalation, and water entering the mine. Most mine rescue teams are composed of miners who know the mine and are familiar with the mine machinery they may encounter during the rescue, the layout of workings and geological conditions and working practices. Local and state governments may have teams on call ready to respond to mine accidents. In our paper we have presented some of the newest training methods in countries where mine rescue has more than 100 years history. Also we have presented a few researches made by our collective in 2012 - 2014 year with heart rate monitors and GPS sport watches over 21 mine rescuers trained in the Laboratory for Risk-Rescue Operations of the INCD INSEMEX.

  13. Effects of mine strata thermal behavior and mine initial temperatures on mobile refuge alternative temperature.

    Science.gov (United States)

    Yantek, D S; Yan, L; Bissert, P T; Klein, M D

    2017-04-01

    Federal regulations require the installation of refuge alternatives (RAs) in underground coal mines. Mobile RAs have a limited ability to dissipate heat, and heat buildup can lead to a life-threatening condition as the RA internal air temperature and relative humidity increase. The U.S. National Institute for Occupational Safety and Health (NIOSH) performed heat testing on a 10-person tent-type training RA and contracted ThermoAnalytics Inc. to develop a validated thermal simulation model of the tested RA. The model was used to examine the effects of the constant mine strata temperature assumption, initial mine air temperature, initial mine strata surface temperature (MSST), initial mine strata temperature at depth (MSTD) and mine strata thermal behavior on RA internal air temperature using 117 W (400 Btu/h) of sensible heat input per simulated miner. For the studied RA, when the mine strata temperature was treated as a constant, the final predicted RA internal air temperature was 7.1°C (12.8°F) lower than it was when the mine strata thermal behavior was included in the model. A 5.6°C (10.0°F) increase in the initial MSST resulted in a 3.9°C (7.1°F) increase in the final RA internal air temperature, whereas a 5.6°C (10°F) increase in the initial MSTD yielded a 1.4°C (2.5°F) increase in the final RA internal air temperature. The results indicate that mine strata temperature increases and mine strata initial temperatures must be accounted for in the physical testing or thermal simulations of RAs.

  14. Uranium mining and milling

    International Nuclear Information System (INIS)

    Floeter, W.

    1976-01-01

    In this report uranium mining and milling are reviewed. The fuel cycle, different types of uranium geological deposits, blending of ores, open cast and underground mining, the mining cost and radiation protection in mines are treated in the first part of this report. In the second part, the milling of uranium ores is treated, including process technology, acid and alkaline leaching, process design for physical and chemical treatment of the ores, and the cost. Each chapter is clarified by added figures, diagrams, tables, and flowsheets. (HK) [de

  15. Chronic cardiovascular disease mortality in mountaintop mining areas of central Appalachian states.

    Science.gov (United States)

    Esch, Laura; Hendryx, Michael

    2011-01-01

    To determine if chronic cardiovascular disease (CVD) mortality rates are higher among residents of mountaintop mining (MTM) areas compared to mining and nonmining areas, and to examine the association between greater levels of MTM surface mining and CVD mortality. Age-adjusted chronic CVD mortality rates from 1999 to 2006 for counties in 4 Appalachian states where MTM occurs (N = 404) were linked with county coal mining data. Three groups of counties were compared: MTM, coal mining but not MTM, and nonmining. Covariates included smoking rate, rural-urban status, percent male population, primary care physician supply, obesity rate, diabetes rate, poverty rate, race/ethnicity rates, high school and college education rates, and Appalachian county. Linear regression analyses examined the association of mortality rates with mining in MTM areas and non-MTM areas and the association of mortality with quantity of surface coal mined in MTM areas. Prior to covariate adjustment, chronic CVD mortality rates were significantly higher in both mining areas compared to nonmining areas and significantly highest in MTM areas. After adjustment, mortality rates in MTM areas remained significantly higher and increased as a function of greater levels of surface mining. Higher obesity and poverty rates and lower college education rates also significantly predicted CVD mortality overall and in rural counties. MTM activity is significantly associated with elevated chronic CVD mortality rates. Future research is necessary to examine the socioeconomic and environmental impacts of MTM on health to reduce health disparities in rural coal mining areas. © 2011 National Rural Health Association.

  16. Applied Geochemistry Special Issue on Environmental geochemistry of modern mining

    Science.gov (United States)

    Seal, Robert R.; Nordstrom, D. Kirk

    2015-01-01

    challenges of current and future mines share similarities with abandoned mines, but differences also exist. Mining and ore processing techniques have changed; the environmental footprint of waste materials has changed; environmental protection has become a more integral part of the mine planning process; and most historical mining was done with limited regard for the environment. The 17 papers in this special issue evolved from the Society of Economic Geologists’ short course.The relevant geochemical processes encompass the source, transport, and fate of contaminants related to the life cycle of a mine. Contaminants include metals and other inorganic species derived from geologic sources such as ore and solid mine waste, and substances brought to the site for ore processing, such as cyanide to leach gold. Factors, such as mine-waste mineralogy, hydrologic setting, mine-drainage chemistry, and microbial activity, that affect the hydrochemical risks from mining are reviewed by Nordstrom et al. In another paper, Nordstrom discusses baseline characterization at mine sites in a regulatory framework, and emphasizes the influence of mineral deposits in producing naturally elevated concentrations of many trace elements in surface water and groundwater. Surface water quality in mineralized watersheds is influenced by a number of processes that act on daily (diel) cycles and can produce dramatic variations in trace element concentrations as described by Gammons et al. Pre-mining baseline characterization studies should strive to capture the magnitude of these diel variations. Desbarats et al., using a case study of mine drainage from a gold mine, illustrate how elements that commonly occur as negatively charged species (anions) in solution, such as arsenic as arsenate, behave in an opposite fashion than most metals, which occur as positively charged species (cations). Significant improvement in the understanding of factors that influence the toxicity of metals to aquatic organisms

  17. Description of basic mining legal principles.

    Science.gov (United States)

    Schmidt, Reinhard

    2014-01-01

    The Federal Mining Act manages access, via the system of mining concessions, to areas free for mining natural resources that do not belong to the surface property and deposits' owner. These cover especially important natural resources for the economy, including coal, ore, salt, crude oil and natural gas, and also terrestrial heat. For mining operations there exist, however, the same decrees for natural resources in the property of the surface owners, which are predominantly higher-value industrial minerals such as roofing slate, basalt, quartz sand, and clays for the fireproofing industry. In the case of mining laws, administrative procedures such as issuing mining concessions, approving operating plans, and issuing permits or licenses to explore according to water rights or the Federal Immission Control Act, those authorities and departments in whose remit the projects fall are dealt with by the Mining Authority. This means that the Mining Authority is the only state point of contact for the applicant, essentially an "all-in-one" service as it will itself instigate any further participation procedures required. The classic licensing procedure of mining is the operations plan procedure, whereby the operator submits an operating plan to the Mining Authority, which then examines it to ensure it fulfills mandatory legal safety objectives. If necessary these safety objectives can be met during licensing of the operating plans by stipulating additional requirements, Depending on the subject and validity period there are overall operating plans having the widest possible remit with comprehensive participation by the authorities and basic operating plans that form the basis for every mining works. There are also special operating plans, which owing to the dynamics of mining, resolve matters that suddenly become necessary or when the basic operating plans as originally conceived were not relevant. The closing-down operating plan is the designated tool for closing down

  18. Locating critical points on multi-dimensional surfaces by genetic algorithm: test cases including normal and perturbed argon clusters

    Science.gov (United States)

    Chaudhury, Pinaki; Bhattacharyya, S. P.

    1999-03-01

    It is demonstrated that Genetic Algorithm in a floating point realisation can be a viable tool for locating critical points on a multi-dimensional potential energy surface (PES). For small clusters, the standard algorithm works well. For bigger ones, the search for global minimum becomes more efficient when used in conjunction with coordinate stretching, and partitioning of the strings into a core part and an outer part which are alternately optimized The method works with equal facility for locating minima, local as well as global, and saddle points (SP) of arbitrary orders. The search for minima requires computation of the gradient vector, but not the Hessian, while that for SP's requires the information of the gradient vector and the Hessian, the latter only at some specific points on the path. The method proposed is tested on (i) a model 2-d PES (ii) argon clusters (Ar 4-Ar 30) in which argon atoms interact via Lennard-Jones potential, (iii) Ar mX, m=12 clusters where X may be a neutral atom or a cation. We also explore if the method could also be used to construct what may be called a stochastic representation of the reaction path on a given PES with reference to conformational changes in Ar n clusters.

  19. SWRT: A package for semi-analytical solutions of surface wave propagation, including mode conversion, across transversely aligned vertical discontinuities

    Directory of Open Access Journals (Sweden)

    A. Datta

    2018-03-01

    Full Text Available We present a suite of programs that implement decades-old algorithms for computation of seismic surface wave reflection and transmission coefficients at a welded contact between two laterally homogeneous quarter-spaces. For Love as well as Rayleigh waves, the algorithms are shown to be capable of modelling multiple mode conversions at a lateral discontinuity, which was not shown in the original publications or in the subsequent literature. Only normal incidence at a lateral boundary is considered so there is no Love–Rayleigh coupling, but incidence of any mode and coupling to any (other mode can be handled. The code is written in Python and makes use of SciPy's Simpson's rule integrator and NumPy's linear algebra solver for its core functionality. Transmission-side results from this code are found to be in good agreement with those from finite-difference simulations. In today's research environment of extensive computing power, the coded algorithms are arguably redundant but SWRT can be used as a valuable testing tool for the ever evolving numerical solvers of seismic wave propagation. SWRT is available via GitHub (https://github.com/arjundatta23/SWRT.git.

  20. SWRT: A package for semi-analytical solutions of surface wave propagation, including mode conversion, across transversely aligned vertical discontinuities

    Science.gov (United States)

    Datta, Arjun

    2018-03-01

    We present a suite of programs that implement decades-old algorithms for computation of seismic surface wave reflection and transmission coefficients at a welded contact between two laterally homogeneous quarter-spaces. For Love as well as Rayleigh waves, the algorithms are shown to be capable of modelling multiple mode conversions at a lateral discontinuity, which was not shown in the original publications or in the subsequent literature. Only normal incidence at a lateral boundary is considered so there is no Love-Rayleigh coupling, but incidence of any mode and coupling to any (other) mode can be handled. The code is written in Python and makes use of SciPy's Simpson's rule integrator and NumPy's linear algebra solver for its core functionality. Transmission-side results from this code are found to be in good agreement with those from finite-difference simulations. In today's research environment of extensive computing power, the coded algorithms are arguably redundant but SWRT can be used as a valuable testing tool for the ever evolving numerical solvers of seismic wave propagation. SWRT is available via GitHub (https://github.com/arjundatta23/SWRT.git).

  1. Measured Properties of Turbulent Premixed Flames for Model Assessment, Including Burning Velocities, Stretch Rates, and Surface Densities (Postprint)

    Science.gov (United States)

    2006-10-01

    conditions was stabilized on a large two-dimensional slot Bunsen burner . It was found that the turbulent burning velocity of Bunsen flames depends...burning velocity of Bunsen flames are inadequate because they should include two additional parameters: mean velocity Ū and burner width W. These...corru- gated) flame with well-defined boundary conditions was stabilized on a large two-dimensional slot Bunsen burner . It was found that the turbulent

  2. Groundwater restoration with in situ uranium leach mining

    International Nuclear Information System (INIS)

    Charbeneau, R.J.

    1984-01-01

    In situ leach mining of uranium has developed into a major mining technology. Since 1975, when the first commercial mine was licensed in the United States, the percentage or uranium produced by in situ mining has steadily grown from 0.6 to 10 percent in 1980. Part of the reason for this growth is that in situ mining offers less initial capital investment, shorter start-up times, greater safety, and less labor than conventional mining methods. There is little disturbance of the surface terrain or surface waters, no mill tailings piles, and no large open pits, but in situ leaching mining does have environmental disadvantages. During the mining, large amounts of ground water are cirulated and there is some withdrawal from an area where aquifers constitute a major portion of the water supply for other purposes. When an ammonia-based leach system is used, the ammonium ion is introduced into an area where cation exchange on clays (and some production of nitrate) may occur. Also, injection of an oxidant with the leach solution causes valence and phase changes of indigenous elements such as As, Cu, Fe, Mo, Se, S, and V as well as U. Furthermore, the surrounding ground water can become contaminated by escape of the leach solution from the mining zone. This chapter presents an overview of the in situ mining technology, including uranium deposition, mining techniques, and ground water restoration alternatives. The latter part of the chapter covers the situation in South Texas. Economics and development of the industry, groundwater resources, regulation, and restoration activities are also reviewed

  3. Determination of Seismic Safety Zones during the Surface Mining Operation Development in the Case of the “Buvač” Open Pit

    Directory of Open Access Journals (Sweden)

    Vladimir Malbasic

    2018-02-01

    it is possible to define the allowed explosive quantities or minimum allowed distances in any area of the surface pit from the aspect of seismic safety. In the indicated case, and based on the analysis results, it is shown that in some areas of mining works in the case of the “Buvač”, Omarska open pit, projected explosive quantities cannot be used. In some cases, it is even necessary to divide the explosive charge in blasting holes with additional delayers.

  4. Impact of terrestrial mining and intensive agriculture in pollution of estuarine surface sediments: Spatial distribution of trace metals in the Gulf of Urabá, Colombia.

    Science.gov (United States)

    Vallejo Toro, Pedro Pablo; Vásquez Bedoya, Luis Fernando; Correa, Iván Darío; Bernal Franco, Gladys Rocío; Alcántara-Carrió, Javier; Palacio Baena, Jaime Alberto

    2016-10-15

    The Gulf of Urabá (northwestern Colombia) is a geostrategic region, rich in biodiversity and natural resources. Its economy is mainly based on agribusinesses and mining activities. In this research is determined the impact of these activities in bottom surface sediments of the estuary. Thus, grain size, total organic carbon, total nitrogen, carbonates, Ag, Al, Ca, Cr, Cu, Fe, Hg, Mg, Mn, Ni, Pb and Zn concentrations from 17 surface sediment samples were obtained and enrichment factors (EF) as well as geo-accumulation indices (Igeo) were calculated to determine the contamination level in the gulf. EF and Igeo values revealed that the estuary is extremely contaminated with Ag and moderately contaminated with Zn. Therefore, the observed enrichment of Ag may be explained as a residue of the extraction of gold and platinum-group metals and the enrichment with Zn associated mainly to pesticides used in banana plantations. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Identification of Social and Environmental Conflicts Resulting from Open-Cast Mining

    Science.gov (United States)

    Górniak-Zimroz, Justyna; Pactwa, Katarzyna

    2016-10-01

    Open-cast mining is related to interference in the natural environment. It also affects human health and quality of life. This influence is, among others, dependent on the type of extracted materials, size of deposit, methods of mining and mineral processing, as well as, equally important, sensitivity of the environment within which mining is planned. The negative effects of mining include deformations of land surface or contamination of soils, air and water. What is more, in many cases, mining for minerals leads to clearing of housing and transport infrastructures located within the mining area, a decrease in values of the properties in the immediate vicinity of a deposit, and an increase in stress levels in local residents exposed to noise. The awareness of negative consequences of taking up open-cast mining activity leads to conflicts between a mining entrepreneur and self-government authorities, society or nongovernment organisations. The article attempts to identify potential social and environmental conflicts that may occur in relation to a planned mining activity. The results of the analyses were interpreted with respect to the deposits which were or have been mined. That enabled one to determine which facilities exclude mineral mining and which allow it. The research took the non-energy mineral resources into consideration which are included in the group of solid minerals located in one of the districts of Lower Silesian Province (SW Poland). The spatial analyses used the tools available in the geographical information systems

  6. Proceedings of the fourth WVU conference on coal mine electrotechnology

    Energy Technology Data Exchange (ETDEWEB)

    Aldridge, M.D. (ed.)

    1978-10-01

    Thirty-nine papers from the Proceedings have been entered individually into EDB and ERA. Topics covered included mine power systems, mine instrumentation, mine illumination, mine communications, automatic control and monitoring, regulations, power distribution instrumentation, power distribution equipment, electrical systems for mine trolleys, on-line computer control of mines and monitoring using microprocessors. (LTN)

  7. Mine-fire diagnostics applied to the Carbondale, Pennsylvania mine-fire site. Rept. of Investigations/1992

    International Nuclear Information System (INIS)

    Kim, A.G.; Justin, T.R.; Miller, J.F.

    1992-01-01

    The U.S. Bureau of Mines applied its mine fire diagnostic method to an abandoned anthracite mine fire site in Carbondale, Lackawanna County, PA. The technique to locate fires in abandoned coal mines and coal refuse piles includes the determination of hydrocarbon concentrations in mine gases, the imposition of an underground gas flow direction, and use of a surface mapping method, to define heated and cold zones in underground coal strata. The heated zones at Carbondale were characterized by elevated methane concentrations. The results of 25 communication tests were analyzed to define 2 large (approximately 100 by 250 ft) and 5 small, isolated heated zones. An approximate correlation existed between the location of the heated zones and areas of anomalous snow melt. The correlation between the results of the diagnostic test and subsurface temperatures was not significant

  8. Coal mine subsidence

    International Nuclear Information System (INIS)

    Rahall, N.J.

    1991-05-01

    This paper examines the efficacy of the Department of the Interior's Office of Surface Mining Reclamation and Enforcement's (OSMRE) efforts to implement the federally assisted coal mine subsidence insurance program. Coal mine subsidence, a gradual settling of the earth's surface above an underground mine, can damage nearby land and property. To help protect property owners from subsidence-related damage, the Congress passed legislation in 1984 authorizing OSMRE to make grants of up to $3 million to each state to help the states establish self-sustaining, state-administered insurance programs. Of the 21 eligible states, six Colorado, Indiana, Kentucky, Ohio, West Virginia, and Wyoming applied for grants. This paper reviews the efforts of these six states to develop self-sustaining insurance programs and assessed OSMRE's oversight of those efforts

  9. Present and future mine effluents management at Zirovski Vrh uranium mine

    International Nuclear Information System (INIS)

    Logar, Z.; Likar, B.; Gantar, I.

    2002-01-01

    Zirovski Vrh uranium mine and its facilities are situated on the northeastern slopes of the Zirovski Vrh ridge (960 m) and on the southern slopes of Crna gora (611 m) respectively. Mine elevation is from 430 m (bottom of the valley) to 580 m (P-1 adit). All effluents from the mine and mill objects flow into the Brebovscica river (with average yearly flow of 0.74 m 3 /s): run off mine water; mine waste pile Jazbec outflow; mill tailings Borst outflows; effluents from mine temporary mine waste piles P-1, P-9, P-36 are of minor significance. The first three effluents and the recipient surface water flows (the Todrascica brook and the Brebovscica river) are monitored extensively. The impact of radioactive polluted outflows on named waters is proved, but far under the maximal permitted limit values. The authorised maximal limits values for mine effluents were obtained in 1996. Detail design will ensure that this values will not be exceeded in the future. The long term planes are to minimise the uranium concentrations in the run off mine water by target underground drilling. The mine waste pile and the mill tailings will be covered by engineered cover system to avoid clean water contamination by weathering and ablution as well. The existing effluents from the mill tailings will diminish after the remediation and consolidation of the tailing. The Government of Slovenia funds the remediation of the uranium production site Zirovski Vrh. Estimated needed funds for remediation of the main objects are shown in the table below. The total investment includes also the costs for effluents control. Area Mio US$ Underground mine remediation 19.00 Mine waste pile remediation 6.50 Mill tailings remediation 2.24 Total investment costs 27.74 Above figures do not include operation costs of the Zirovski Vrh Mine, approximately US$ 2.2 Mio per year nowadays. The last implementation schedule foresights the end of remediation works in year 2005. After that starts trial monitoring of 5 years

  10. Review of South American mines

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    A general overview is presented of the mining activity and plans for South America. The countries which are presented are Columbia, Argentina, Brazil, Venezuela, Chile, Peru, and Bolivia. The products of the mines include coal, bauxite, gold, iron, uranium, copper and numerous other minor materials. A discussion of current production, support and processing facilities, and mining strategies is also given

  11. Management of mining-related damages in abandoned underground coal mine areas using GIS

    International Nuclear Information System (INIS)

    Lee, U.J.; Kim, J.A.; Kim, S.S.; Kim, W.K.; Yoon, S.H.; Choi, J.K.

    2005-01-01

    The mining-related damages such as ground subsidence, acid mine drainage (AMD), and deforestation in the abandoned underground coal mine areas become an object of public concern. Therefore, the system to manage the mining-related damages is needed for the effective drive of rehabilitation activities. The management system for Abandoned Underground Coal Mine using GIS includes the database about mining record and information associated with the mining-related damages and application programs to support mine damage prevention business. Also, this system would support decision-making policy for rehabilitation and provide basic geological data for regional construction works in abandoned underground coal mine areas. (authors)

  12. 30 CFR 819.17 - Auger mining: Subsidence protection.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Auger mining: Subsidence protection. 819.17 Section 819.17 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE... MINING § 819.17 Auger mining: Subsidence protection. Auger mining shall be conducted in accordance with...

  13. Web Mining

    Science.gov (United States)

    Fürnkranz, Johannes

    The World-Wide Web provides every internet citizen with access to an abundance of information, but it becomes increasingly difficult to identify the relevant pieces of information. Research in web mining tries to address this problem by applying techniques from data mining and machine learning to Web data and documents. This chapter provides a brief overview of web mining techniques and research areas, most notably hypertext classification, wrapper induction, recommender systems and web usage mining.

  14. Using radar interferometry and SBAS technique to detect surface subsidence relating to coal mining in Upper Silesia from 1993-2000 and 2003-2010

    Directory of Open Access Journals (Sweden)

    Nádudvari Ádám

    2016-03-01

    Full Text Available In the presented research ERS1-2 and Envisat ASAR archive data were used for the periods 1993 – 2000 and 2003 – 2010. The radar images were acquired over Upper Silesia in southern Poland. DinSAR (Differential InSAR and SBAS (Small Baseline Subset methods were applied for the detection of the most subsided areas. The DinSAR images were layer stacked for an image using 26 interferometry pairs of ERS1-2 SAR and 16 pairs from Envisat ASAR images in an ascending-descending orbit combination. The stacking of these images showed the most subsided parts of these cities even under low coherent areas, but the results are less precise. In the Upper Silesian Coal Basin, intensive underground coal exploitation has resulted in several surface deformations under Bytom (~8-17 km2, Piekary Śląskie (~9-15 km2, Ruda Śląska (~32-42 km2 and Katowice (~20-23 km2 with 25-40 cm of subsidence (in general in the studied time periods. The SBAS technique has also shown that coal mining caused subsidence in the cities of Bytom, Katowice, and Piekary Śląskie of 5-7 cm/yr. The presented SBAS method did not work for low coherent areas, e.g. dense forested areas. DInSAR data also pointed to several decreasingly less active mining areas, which relate to the mine closures in Bytom and Ruda Śląska, which is also verified by the time series analysis.

  15. Sampling and monitoring for the mine life cycle

    Science.gov (United States)

    McLemore, Virginia T.; Smith, Kathleen S.; Russell, Carol C.

    2014-01-01

    Sampling and Monitoring for the Mine Life Cycle provides an overview of sampling for environmental purposes and monitoring of environmentally relevant variables at mining sites. It focuses on environmental sampling and monitoring of surface water, and also considers groundwater, process water streams, rock, soil, and other media including air and biological organisms. The handbook includes an appendix of technical summaries written by subject-matter experts that describe field measurements, collection methods, and analytical techniques and procedures relevant to environmental sampling and monitoring.The sixth of a series of handbooks on technologies for management of metal mine and metallurgical process drainage, this handbook supplements and enhances current literature and provides an awareness of the critical components and complexities involved in environmental sampling and monitoring at the mine site. It differs from most information sources by providing an approach to address all types of mining influenced water and other sampling media throughout the mine life cycle.Sampling and Monitoring for the Mine Life Cycle is organized into a main text and six appendices that are an integral part of the handbook. Sidebars and illustrations are included to provide additional detail about important concepts, to present examples and brief case studies, and to suggest resources for further information. Extensive references are included.

  16. Arsenic and metallic trace elements cycling in the surface water-groundwater-soil continuum down-gradient from a reclaimed mine area: Isotopic imprints

    Science.gov (United States)

    Khaska, Mahmoud; Le Gal La Salle, Corinne; Sassine, Lara; Cary, Lise; Bruguier, Olivier; Verdoux, Patrick

    2018-03-01

    One decade after closure of the Salsigne mine (SW France), As contamination persisted in surface water, groundwater and soil near and down-gradient from the reclaimed ore processing site (OPS). We assess the fate of As and other associated chalcophilic MTEs, and their transport in the surface-water/groundwater/soil continuum down-gradient from the reclaimed OPS, using Sr-isotopic fingerprinting. The Sr-isotope ratio was used as a tracer of transfer processes in this hydro-geosystem and was combined to sequential extraction of soil samples to evaluate the impact of contaminated soil on the underlying phreatic groundwater. The contrast in Sr isotope compositions of the different soil fractions reflects several Sr sources in the soil. In the complex hydro-geosystem around the OPS, the transport of As and MTEs is affected by a succession of factors, such as (1) Existence of a reducing zone in the aquifer below the reclaimed OPS, where groundwater shows relatively high As and MTEs contents, (2) Groundwater discharge into the stream near the reclaimed OPS causing an increase in As and MTE concentrations in surface water; (3) Partial co-precipitation of As with Fe-oxyhydroxides, contributing to some attenuation of As contents in surface water; (4) Infiltration of contaminated stream water into the unconfined aquifer down-gradient from the reclaimed OPS; (5) Accumulation of As and MTEs in soil irrigated with contaminated stream- and groundwater; (6) Release of As and MTEs from labile soil fractions to underlying the groundwater.

  17. Statistical analysis of surface-water-quality data in and near the coal-mining region of southwestern Indiana, 1957-80

    Science.gov (United States)

    Martin, Jeffrey D.; Crawford, Charles G.

    1987-01-01

    The Surface Mining Control and Reclamation Act of 1977 requires that applications for coal-mining permits contain information about the water quality of streams at and near a proposed mine. To meet this need for information, streamflow, specific conductance, pH, and concentrations of total alkalinity, sulfate, dissolved solids, suspended solids, total iron, and total manganese at 37 stations were analyzed to determine the spatial and seasonal variations in water quality and to develop equations for predicting water quality. The season of lowest median streamflow was related to the size of the drainage area. Median streamflow was least during fall at 15 of 16 stations having drainage areas greater than 1,000 square miles but was least during summer at 17 of 21 stations having drainage areas less than 1,000 square miles. In general, the season of lowest median specific conductance occurred during the season of highest streamflow except at stations on the Wabash River. Median specific conductance was least during summer at 9 of 9 stations on the Wabash River, but was least during winter or spring (the seasons of highest streamflow) at 27 of the remaining 28 stations. Linear, inverse, semilog, log-log, and hyperbolic regression models were used to investigate the functional relations between water-quality characteristics and streamflow. Of 186 relations investigated, 143 were statistically significant. Specific conductance and concentrations of total alkalinity and sulfate were negatively related to streamflow at all stations except for a positive relation between total alkalinity concentration and streamflow at Patoka River near Princeton. Concentrations of total alkalinity and sulfate were positively related to specific conductance at all stations except for a negative relation at Patoka River near Princeton and for a positive and negative relation at Patoka River at Jasper. Most of these relations are good, have small confidence intervals, and will give reliable

  18. A mine abutment

    Energy Technology Data Exchange (ETDEWEB)

    Ardashev, K.A.; Borisovets, V.A.; Kozel, A.M.

    1983-01-01

    The purpose of the invention is to increase the service life of the abutment between a mine shaft and near shaft drifts by eliminating the irregularity of the near shaft rock massif. The stated purpose is achieved by the fact that in the mine abutment, which includes a mine shaft and near shaft chambers, the mine shaft is made within the near shaft chambers with an expansion and is equipped with a cylindrical shell installed in its widened part with an inside cross section equal to the cross section of the shaft which with the shaft forms a cavity for positioning the near shaft chambers. Moreover, the mine shaft in the expansion zone may be made in the form of a cone in its upper part and in the form of a cylinder in its lower part.

  19. Comparing Multiple Evapotranspiration-calculating Methods, Including Eddy Covariance and Surface Renewal, Using Empirical Measurements from Alfalfa Fields in the Sacramento-San Joaquin River Delta

    Science.gov (United States)

    Clay, J.; Kent, E. R.; Leinfelder-Miles, M.; Lambert, J. J.; Little, C.; Paw U, K. T.; Snyder, R. L.

    2016-12-01

    Eddy covariance and surface renewal measurements were used to estimate evapotranspiration (ET) over a variety of crop fields in the Sacramento-San Joaquin River Delta during the 2016 growing season. However, comparing and evaluating multiple measurement systems and methods for determining ET was focused upon at a single alfalfa site. The eddy covariance systems included two systems for direct measurement of latent heat flux: one using a separate sonic anemometer and an open path infrared gas analyzer and another using a combined system (Campbell Scientific IRGASON). For these methods, eddy covariance was used with measurements from the Campbell Scientific CSAT3, the LI-COR 7500a, the Campbell Scientific IRGASON, and an additional R.M. Young sonic anemometer. In addition to those direct measures, the surface renewal approach included several energy balance residual methods in which net radiation, ground heat flux, and sensible heat flux (H) were measured. H was measured using several systems and different methods, including using multiple fast-response thermocouple measurements and using the temperatures measured by the sonic anemometers. The energy available for ET was then calculated as the residual of the surface energy balance equation. Differences in ET values were analyzed between the eddy covariance and surface renewal methods, using the IRGASON-derived values of ET as the standard for accuracy.

  20. Hydrogeologic and environmental impact of amjhore pyrite mines, India

    Science.gov (United States)

    Choubey, Vishnu D.; Rawat, Rajendra K.

    1991-01-01

    Drainage from active and inactive pyrite mines has produced chemical and physical pollution of both ground- and surface water in Amjhore region. In the present case, chemical pollution is caused by exposing pyrite minerals to oxidation or leaching, resulting in undesirable concentrations of dissolved materials. Pyrite mining suddenly exposed large quantities of sulfides to direct contact with oxygen, and oxidation proceeds rapidly, resulting in acidity and release of metal (Fe) and sulfates to the water system, eventually resulting in water pollution in the region. The magnitude and impact of the problem is just being recognized and, as the present and the future projected demand for clean water is of top priority, the present studies were undertaken. Mine drainage includes water flowing from the surface and underground mines and runoff or seepage from the pyrite mines. This article describes the various hydrologic factors that control acid water formation and its transport. The mine drainage is obviously a continuing source of pollution and, therefore, remedial measures mainly consisting of a double-stage limestone-lime treatment technique have been suggested. The present results will be used to develop an alternative and more effective abatement technology to mitigate acid production at the source, namely, the technique of revegetation of the soil cover applied to the waste mine dump material. Water quality change is discussed in detail, with emphasis on acidity formed from exposed pyrite material and on increase in dissolved solids. Preventive and treatment measures are recommended.

  1. Wikipedia Mining

    Science.gov (United States)

    Nakayama, Kotaro; Ito, Masahiro; Erdmann, Maike; Shirakawa, Masumi; Michishita, Tomoyuki; Hara, Takahiro; Nishio, Shojiro

    Wikipedia, a collaborative Wiki-based encyclopedia, has become a huge phenomenon among Internet users. It covers a huge number of concepts of various fields such as arts, geography, history, science, sports and games. As a corpus for knowledge extraction, Wikipedia's impressive characteristics are not limited to the scale, but also include the dense link structure, URL based word sense disambiguation, and brief anchor texts. Because of these characteristics, Wikipedia has become a promising corpus and a new frontier for research. In the past few years, a considerable number of researches have been conducted in various areas such as semantic relatedness measurement, bilingual dictionary construction, and ontology construction. Extracting machine understandable knowledge from Wikipedia to enhance the intelligence on computational systems is the main goal of "Wikipedia Mining," a project on CREP (Challenge for Realizing Early Profits) in JSAI. In this paper, we take a comprehensive, panoramic view of Wikipedia Mining research and the current status of our challenge. After that, we will discuss about the future vision of this challenge.

  2. Problems in monitoring dust levels within mines.

    Science.gov (United States)

    Hearl, F J; Hewett, P

    1993-01-01

    The collection of dust samples in mines is a multifaceted problem. Initially, one must define the situation being sampled and the purpose of the sampling in order to establish an appropriate sampling plan, including specification of the type of mining process (surface vs. underground, metal vs. nonmetal vs. coal) as well as the mining system employed (equipment). The next step is to decide the nature of the hazard being monitored (i.e., dust depositing in alveolar air spaces entails use of respirable dust sampling, upper airways entails thoracic-fraction sampler, and systemic effects call for an inhalable-fraction sampler) in order to select the appropriate sampler. Deciding on a particular sampling strategy is a complex issue involving federal regulations as well as compliance.

  3. Bauxite Mining Sustainably

    Science.gov (United States)

    Atkins, Patrick R.; Bayliss, Chris; Ward, Sam

    In 1990, the International Aluminum Institute began a program to report on the bauxite mining and rehabilitation activities of the worldwide industry. A survey process was initiated and reports were published in 1992, 2000 and 2004. The most recent report includes extensive data on mines representing over 70% of the world's output of bauxite and includes a more detailed focus on the social and economic as well as the environmental performance of the industry.

  4. Tracking natural and anthropogenic origins of dissolved arsenic during surface and groundwater interaction in a post-closure mining context: Isotopic constraints.

    Science.gov (United States)

    Khaska, Mahmoud; Le Gal La Salle, Corinne; Verdoux, Patrick; Boutin, René

    2015-01-01

    Arsenic contamination of stream waters and groundwater is a real issue in Au-As mine environments. At the Salsigne Au-As mine, southern France, arsenic contamination persists after closure and remediation of the site. In this study, natural and anthropogenic arsenic inputs in surface water and groundwater are identified based on (87)Sr/(86)Sr, and δ(18)O and δ(2)H isotopic composition of water. In the wet season, downstream of the remediated zone, the arsenic contents in stream water and alluvial aquifer groundwater are high, with values in the order of 36 μg/L and 40 μg/L respectively, while upstream natural background average concentrations are around 4 μg/L. Locally down-gradient of the reclaimed area, arsenic concentrations in stream water showed 2 peaks, one during an important rainy event (101 mm) in the wet season in May, and a longer one over the dry period, reaching 120 and 110 μg/L respectively. The temporal variations in arsenic content in stream water can be explained i) during the dry season, by release of arsenic stored in the alluvial sediments through increased contribution from base flow and decreased stream flow and ii) during major rainy events, by mobilization of arsenic associated with important surface runoff. The (87)Sr/(86)Sr ratios associated with increasing arsenic content in stream waters downstream of the reclaimed area are significantly lower than that of the natural Sr inherited from Variscan formations. These low (87)Sr/(86)Sr ratios are likely to be associated with the decontaminating water treatment processes, used in the past and still at present, where CaO, produced from marine limestone and therefore showing a low (87)Sr/(86)Sr ratios, is used to precipitate Ca3(AsO4)2. The low Sr isotope signatures will then impact on the Sr isotope ratio of (1) the Ca-arsenate stored in tailing dams, (2) effluent currently produced by water treatment process and (3) groundwater draining from the overall site. Furthermore, Δ(2)H shows

  5. Tracking natural and anthropogenic origins of dissolved arsenic during surface and groundwater interaction in a post-closure mining context: Isotopic constraints

    Science.gov (United States)

    Khaska, Mahmoud; Le Gal La Salle, Corinne; Verdoux, Patrick; Boutin, René

    2015-06-01

    Arsenic contamination of stream waters and groundwater is a real issue in Au-As mine environments. At the Salsigne Au-As mine, southern France, arsenic contamination persists after closure and remediation of the site. In this study, natural and anthropogenic arsenic inputs in surface water and groundwater are identified based on 87Sr/86Sr, and δ18O and δ2H isotopic composition of water. In the wet season, downstream of the remediated zone, the arsenic contents in stream water and alluvial aquifer groundwater are high, with values in the order of 36 μg/L and 40 μg/L respectively, while upstream natural background average concentrations are around 4 μg/L. Locally down-gradient of the reclaimed area, arsenic concentrations in stream water showed 2 peaks, one during an important rainy event (101 mm) in the wet season in May, and a longer one over the dry period, reaching 120 and 110 μg/L respectively. The temporal variations in arsenic content in stream water can be explained i) during the dry season, by release of arsenic stored in the alluvial sediments through increased contribution from base flow and decreased stream flow and ii) during major rainy events, by mobilization of arsenic associated with important surface runoff. The 87Sr/86Sr ratios associated with increasing arsenic content in stream waters downstream of the reclaimed area are significantly lower than that of the natural Sr inherited from Variscan formations. These low 87Sr/86Sr ratios are likely to be associated with the decontaminating water treatment processes, used in the past and still at present, where CaO, produced from marine limestone and therefore showing a low 87Sr/86Sr ratios, is used to precipitate Ca3(AsO4)2. The low Sr isotope signatures will then impact on the Sr isotope ratio of (1) the Ca-arsenate stored in tailing dams, (2) effluent currently produced by water treatment process and (3) groundwater draining from the overall site. Furthermore, Δ2H shows that the low 87Sr/86Sr

  6. Acid mine drainage

    Science.gov (United States)

    Bigham, Jerry M.; Cravotta, Charles A.

    2016-01-01

    Acid mine drainage (AMD) consists of metal-laden solutions produced by the oxidative dissolution of iron sulfide minerals exposed to air, moisture, and acidophilic microbes during the mining of coal and metal deposits. The pH of AMD is usually in the range of 2–6, but mine-impacted waters at circumneutral pH (5–8) are also common. Mine drainage usually contains elevated concentrations of sulfate, iron, aluminum, and other potentially toxic metals leached from rock that hydrolyze and coprecipitate to form rust-colored encrustations or sediments. When AMD is discharged into surface waters or groundwaters, degradation of water quality, injury to aquatic life, and corrosion or encrustation of engineered structures can occur for substantial distances. Prevention and remediation strategies should consider the biogeochemical complexity of the system, the longevity of AMD pollution, the predictive power of geochemical modeling, and the full range of available field technologies for problem mitigation.

  7. 77 FR 55430 - Arkansas Regulatory Program and Abandoned Mine Land Reclamation Plan

    Science.gov (United States)

    2012-09-10

    .... Mining; Permits Incorporating Variances from Approximate Original Contour Restoration Requirements for... DEPARTMENT OF THE INTERIOR Office of Surface Mining Reclamation and Enforcement 30 CFR Part 904... Reclamation Plan AGENCY: Office of Surface Mining Reclamation and Enforcement, Interior. ACTION: Proposed rule...

  8. The non-participation of organic sulphur in acid mine drainage generation.

    Science.gov (United States)

    Casagrande, D J; Finkelman, R B; Caruccio, F T

    1989-12-01

    Acid mine drainage is commonly associated with land disturbances that encounter and expose iron sulphides to oxidising atmospheric conditions. The attendant acidic conditions solubilise a host of trace metals. Within this flow regime the potential exists to contaminate surface drinking water supplies with a variety of trace materials. Accordingly, in evaluating the applications for mines located in the headwaters of water sheds, the pre-mining prediction of the occurrence of acid mine drainage is of paramount importance.There is general agreement among investigators that coal organic sulphur is a nonparticipant in acid mine drainage generation; however, there is no scientific documentation to support this concensus. Using simulated weathering, kinetic, mass balance, petrographic analysis and a peroxide oxidation procedure, coal organic sulphur is shown to be a nonparticipant in acid mine drainage generation. Calculations for assessing the acid-generating potential of a sedimentary rock should not include organic sulphur content.

  9. Data mining.

    Science.gov (United States)

    Cupples, L Adrienne; Bailey, Julia; Cartier, Kevin C; Falk, Catherine T; Liu, Kuang-Yu; Ye, Yuanqing; Yu, Robert; Zhang, Heping; Zhao, Hongyu

    2005-01-01

    Group 14 used data-mining strategies to evaluate a number of issues, including appropriate diagnosis, haplotype estimation, genetic linkage and association studies, and type I error. Methods ranged from exploratory analyses, to machine learning strategies (neural networks, supervised learning, and tree-based methods), to false discovery rate control of type I errors. The general motivations were to find the "story" in the data and to summarize information from a multitude of measures. Several methods illustrated strategies for better trait definition, using summarization of related traits. In the few studies that sought to identify genes for alcoholism, there was little agreement among the different strategies, likely reflecting the complexities of the disease. Nevertheless, Group 14 found that these methods offered strategies to gain a better understanding of the complex pathways by which disease develops.

  10. Alchemy and mining: metallogenesis and prospecting in early mining books.

    Science.gov (United States)

    Dym, Warren Alexander

    2008-11-01

    Historians have assumed that alchemy had a close association with mining, but exactly how and why miners were interested in alchemy remains unclear. This paper argues that alchemical theory began to be synthesised with classical and Christian theories of the earth in mining books after 1500, and served an important practical function. The theory of metals that mining officials addressed spoke of mineral vapours (Witterungen) that left visible markings on the earth's surface. The prospector searched for mineral ore in part by studying these indications. Mineral vapours also explained the functioning of the dowsing rod, which prospectors applied to the discovery of ore. Historians of early chemistry and mining have claimed that mining had a modernising influence by stripping alchemy of its theoretical component, but this paper shows something quite to the contrary: mining officials may have been sceptical of the possibility of artificial transmutation, but they were interested in a theory of the earth that could translate into prospecting knowledge.

  11. Importance of including small-scale tile drain discharge in the calibration of a coupled groundwater-surface water catchment model

    DEFF Research Database (Denmark)

    Hansen, Anne Lausten; Refsgaard, Jens Christian; Christensen, Britt Stenhøj Baun

    2013-01-01

    the catchment. In this study, a coupled groundwater-surface water model based on the MIKE SHE code was developed for the 4.7 km2 Lillebæk catchment in Denmark, where tile drain flow is a major contributor to the stream discharge. The catchment model was calibrated in several steps by incrementally including...... the observation data into the calibration to see the effect on model performance of including diverse data types, especially tile drain discharge. For the Lillebæk catchment, measurements of hydraulic head, daily stream discharge, and daily tile drain discharge from five small (1–4 ha) drainage areas exist....... The results showed that including tile drain data in the calibration of the catchment model improved its general performance for hydraulic heads and stream discharges. However, the model failed to correctly describe the local-scale dynamics of the tile drain discharges, and, furthermore, including the drain...

  12. Proceedings of the 18. international symposium on mine planning and equipment selection (MPES 2009) and the 11. international symposium on environmental issues and waste management in energy and mineral production (SWEMP 2009) : mine planning and equipment selection and environmental issues and waste management in energy and mineral production

    International Nuclear Information System (INIS)

    Singhal, R.K.; Mehrotra, A.; Fytas, K.; Ge, H.

    2009-01-01

    This conference focused on the application of innovative technologies to the mineral industries and the development of productive methods for the mining and processing industries. It was attended by participants from North and South America, Europe, Australia, Africa and Asia with backgrounds in computer sciences, mining engineering and research in mineral production. The major topics addressed regarding mine planning and equipment selection included economic and technical feasibility studies; reserve estimation; mine development; design and planning of surface and underground mines; drilling, blasting, tunneling and excavation engineering; mining equipment selection; automation and information technology; maintenance and production management for mines and mining systems; mining in terms of health, safety and the environment; and rock mechanics and geotechnical applications. The topics addressed regarding waste management in energy and mineral production included the environmental impacts of coal-fired power projects; mining and reclamation; water management; social aspects of rehabilitation; sustainable development for mineral and energy industries; remediation of contaminated soil and groundwater; health hazard and safety issues in small-scale mining; environmental issues in surface and underground mining of metalliferous, coal, uranium and industrial minerals; occupational health and safety; control of effluents from mineral processing, metallurgy and chemical plants; emerging technologies for environmental protection; reliability of waste containment structures; and tailings treatment, recycling and disposal. The conference featured 162 presentations, of which 30 have been catalogued separately for inclusion in this database. refs., tabs., figs.

  13. Mobile platform for acoustic mine detection applications

    Science.gov (United States)

    Libbey, Brad; Fenneman, Douglas; Burns, Brian

    2005-06-01

    Researchers in academia have successfully demonstrated acoustic landmine detection techniques. These typically employ acoustic or seismic sources to induce vibration in the mine/soil system, and use vibration sensors such as laser vibrometers or geophones to measure the resultant surface motion. These techniques exploit the unique mechanical properties of landmines to discriminate the vibration response of a buried mine from an off-target measurement. The Army requires the ability to rapidly and reliably scan an area for landmines and is developing a mobile platform at NVESD to meet this requirement. The platform represents an initial step toward the implementation of acoustic mine detection technology on a representative field vehicle. The effort relies heavily on the acoustic mine detection cart system developed by researchers at the University of Mississippi and Planning Systems, Inc. The NVESD platform consists of a John Deere E-gator configured with a robotic control system to accurately position the vehicle. In its present design, the E-gator has been outfitted with an array of laser vibrometers and a bank of loudspeakers. Care has been taken to ensure that the vehicle"s mounting hardware and data acquisition algorithms are sufficiently robust to accommodate the implementation of other sensor modalities. A thorough discussion of the mobile platform from its inception to its present configuration will be provided. Specific topics to be addressed include the vehicle"s control and data acquisition systems. Preliminary results from acoustic mine detection experiments will also be presented.

  14. Environmental heritage of oil shale mining

    International Nuclear Information System (INIS)

    Toomik, A.

    1998-01-01

    Oil shale mining like every kind of exploitation of mineral resources imparts a variety of impacts on the environment. One group of factors has a temporary impact during the mining activities only, another group of factors leaves its footprints in nature for a long time. Geological conditions, mining methods underground or surface mining, roof control methods and methods of reclamation determine the variety of landforms and their parameters in post mining landscape. Long-time ecological observations and changing economical conditions can influence the current attitudes and criteria of assessments of the environmental impact caused by mining. (author)

  15. Service mining framework and application

    CERN Document Server

    Chang, Wei-Lun

    2014-01-01

    The shifting focus of service from the 1980s to 2000s has proved that IT not only lowers the cost of service but creates avenues to enhance and increase revenue through service. The new type of service, e-service, is mobile, flexible, interactive, and interchangeable. While service science provides an avenue for future service researches, the specific research areas from the IT perspective still need to be elaborated. This book introduces a novel concept-service mining-to address several research areas from technology, model, management, and application perspectives. Service mining is defined as "a systematical process including service discovery, service experience, service recovery, and service retention to discover unique patterns and exceptional values within the existing services." The goal of service mining is similar to data mining, text mining, or web mining, and aims to "detect something new" from the service pool. The major difference is the feature of service is quite distinct from the mining targe...

  16. Hydrology of the Ferron sandstone aquifer and effects of proposed surface-coal mining in Castle Valley, Utah, with sections on stratigraphy and leaching of overburden

    Science.gov (United States)

    Lines, Gregory C.; Morrissey, Daniel J.; Ryer, Thomas A.; Fuller, Richard H.

    1983-01-01

    Coal in the Ferron Sandstone Member of the Mancos Shale of Cretaceous age has traditionally been mined by underground techniques in the Emery Coal Field in the southern end of Castle Valley in east-central Utah. However, approximately 99 million tons are recoverable by surface mining. Ground water in the Ferron is the sole source of supply for the town of Emery, but the aquifer is essentially untapped outside the Emery area.The Ferron Sandstone Member crops out along the eastern edge of Castle Valley and generally dips 2 ? to 10 ? to the northwest. Sandstones in the Ferron are enclosed between relatively impermeable shale in the Tununk and Blue Gate Members of the Mancos Shale. Along the outcrop, the Ferron ranges in thickness from about 80 feet in the northern part of Castle Valley to 850 feet in the southern part. The Ferron also generally thickens in the subsurface downdip from the outcrop. Records from wells and test holes indicate that the full thickness of the Ferron is saturated with water in most areas downdip from the outcrop area.Tests in the Emery area indicate that transmissivity of the Ferron sandstone aquifer ranges from about 200 to 700 feet squared per day where the Ferron is fully saturated. Aquifer transmissivity is greatest near the Paradise Valley-Joes Valley fault system where permeability has been increased by fracturing. Storage coefficient ranges from about 10 .6 to 10 -3 where the Ferron sandstone aquifer is confined and probably averages 5 x 10-2 where it is unconfined.

  17. Coal mine subsidence and structures

    International Nuclear Information System (INIS)

    Gray, R.E.

    1988-01-01

    Underground coal mining has occurred beneath 32 x 10 9 m 2 (8 million acres) of land in the United States and will eventually extend beneath 162 x 10 9 m 2 (40 million acres). Most of this mining has taken place and will take place in the eastern half of the United States. In areas of abandoned mines where total extraction was not achieved, roof collapse, crushing of coal pillars, or punching of coal pillars into softer mine floor or roof rock is now resulting in sinkhole or trough subsidence tens or even hundreds of years after mining. Difference in geology, in mining, and building construction practice between Europe and the United States preclude direct transfer of European subsidence engineering experience. Building damage cannot be related simply to tensile and compressive strains at the ground surface. Recognition of the subsidence damage role played by ground-structure interaction and by structural details is needed

  18. Causes Of Low Efficiency Of Combined Ventilation System In Coal Mines In Resolving The Problem Of Air Leaks (Inflows) Between Levels And Surface

    Science.gov (United States)

    Popov, Valeriy; Filatov, Yuriy; Lee, Hee; Golik, Anatoliy

    2017-11-01

    The paper discusses the problem of the underground mining safety control. The long-term air intake to coal accumulations is reviewed as one of the reasons of endogenous fires during mining. The methods of combating air leaks (inflows) in order to prevent endogenous fires are analyzed. The calculations showing the discrepancy between the design calculations for the mine ventilation, disregarding a number of mining-andgeological and mining-engineering factors, and the actual conditions of mining are given. It is proved that the conversion of operating mines to combined (pressure and exhaust) ventilation system in order to reduce the endogenous fire hazard of underground mining is unreasonable due to impossibility of providing an optimal distribution of aerodynamic pressure in mines. The conversion does not exclude the entry of air into potentially hazardous zones of endogenous fires. The essence of the combined application of positive and negative control methods for the distribution of air pressure is revealed. It consists of air doors installation in easily ventilated airways and installation of pressure equalization chambers equipped with auxiliary fans near the stoppings, working sections and in parallel airways.The effectiveness of the combined application of negative and positive control methods for the air pressure distribution in order to reduce endogenous fire hazard of mining operations is proved.

  19. Causes Of Low Efficiency Of Combined Ventilation System In Coal Mines In Resolving The Problem Of Air Leaks (Inflows Between Levels And Surface

    Directory of Open Access Journals (Sweden)

    Popov Valeriy

    2017-01-01

    Full Text Available The paper discusses the problem of the underground mining safety control. The long-term air intake to coal accumulations is reviewed as one of the reasons of endogenous fires during mining. The methods of combating air leaks (inflows in order to prevent endogenous fires are analyzed. The calculations showing the discrepancy between the design calculations for the mine ventilation, disregarding a number of mining-andgeological and mining-engineering factors, and the actual conditions of mining are given. It is proved that the conversion of operating mines to combined (pressure and exhaust ventilation system in order to reduce the endogenous fire hazard of underground mining is unreasonable due to impossibility of providing an optimal distribution of aerodynamic pressure in mines. The conversion does not exclude the entry of air into potentially hazardous zones of endogenous fires. The essence of the combined application of positive and negative control methods for the distribution of air pressure is revealed. It consists of air doors installation in easily ventilated airways and installation of pressure equalization chambers equipped with auxiliary fans near the stoppings, working sections and in parallel airways.The effectiveness of the combined application of negative and positive control methods for the air pressure distribution in order to reduce endogenous fire hazard of mining operations is proved.

  20. Surface properties and intracellular speciation revealed an original adaptive mechanism to arsenic in the acid mine drainage bio-indicator Euglena mutabilis.

    Science.gov (United States)

    Halter, David; Casiot, Corinne; Heipieper, Hermann J; Plewniak, Frédéric; Marchal, Marie; Simon, Stéphane; Arsène-Ploetze, Florence; Bertin, Philippe N

    2012-02-01

    Euglena mutabilis is a protist ubiquitously found in extreme environments such as acid mine drainages which are often rich in arsenic. The response of E. mutabilis to this metalloid was compared to that of Euglena gracilis, a protist not found in such environments. Membrane fatty acid composition, cell surface properties, arsenic accumulation kinetics, and intracellular arsenic speciation were determined. The results revealed a modification in fatty acid composition leading to an increased membrane fluidity in both Euglena species under sublethal arsenic concentrations exposure. This increased membrane fluidity correlated to an induced gliding motility observed in E. mutabilis in the presence of this metalloid but did not affect the flagellar dependent motility of E. gracilis. Moreover, when compared to E. gracilis, E. mutabilis showed highly hydrophobic cell surface properties and a higher tolerance to water-soluble arsenical compounds but not to hydrophobic ones. Finally, E. mutabilis showed a lower accumulation of total arsenic in the intracellular compartment and an absence of arsenic methylated species in contrast to E. gracilis. Taken together, our results revealed the existence of a specific arsenical response of E. mutabilis that may play a role in its hypertolerance to this toxic metalloid.

  1. Mining technology, economics and policy 1990

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    The American Mining Conference is an industry association that encompasses: producers of most of America's metals, coal, and industrial and agricultural minerals; manufacturers of mining and mineral processing machinery, equipment and supplies; and engineering and consulting firms and financial institutions that serve the mining industry. The 1990 conference was held in New Orleans, Louisiana, September 23-26, 1990. The conference covered a broad spectrum of issues relevant to the mining industry. Beginning with presentations on accounting and taxation, the conference was divided into sessions covering the following topics: coal and acid rain, communication with the environmental community, employee relations, the environment and environmental technology, mineral exploration, finance, management, mineral processing and new technologies, minerals availability, the mining company, manufacturer, engineer partnership, precious metals, public lands, safety and health, new initiatives for surface mining and reclamation, technical aspects of surface mining and reclamation, and technical aspects of underground mining

  2. Automatic construction of subject-specific human airway geometry including trifurcations based on a CT-segmented airway skeleton and surface

    Science.gov (United States)

    Miyawaki, Shinjiro; Tawhai, Merryn H.; Hoffman, Eric A.; Wenzel, Sally E.; Lin, Ching-Long

    2016-01-01

    We propose a method to construct three-dimensional airway geometric models based on airway skeletons, or centerlines (CLs). Given a CT-segmented airway skeleton and surface, the proposed CL-based method automatically constructs subject-specific models that contain anatomical information regarding branches, include bifurcations and trifurcations, and extend from the trachea to terminal bronchioles. The resulting model can be anatomically realistic with the assistance of an image-based surface; alternatively a model with an idealized skeleton and/or branch diameters is also possible. This method systematically identifies and classifies trifurcations to successfully construct the models, which also provides the number and type of trifurcations for the analysis of the airways from an anatomical point of view. We applied this method to 16 normal and 16 severe asthmatic subjects using their computed tomography images. The average distance between the surface of the model and the image-based surface was 11% of the average voxel size of the image. The four most frequent locations of trifurcations were the left upper division bronchus, left lower lobar bronchus, right upper lobar bronchus, and right intermediate bronchus. The proposed method automatically constructed accurate subject-specific three-dimensional airway geometric models that contain anatomical information regarding branches using airway skeleton, diameters, and image-based surface geometry. The proposed method can construct (i) geometry automatically for population-based studies, (ii) trifurcations to retain the original airway topology, (iii) geometry that can be used for automatic generation of computational fluid dynamics meshes, and (iv) geometry based only on a skeleton and diameters for idealized branches. PMID:27704229

  3. TONO MINE

    OpenAIRE

    齊藤 宏; 湯佐 泰久; 小出 馨; 松井 裕哉; 太田 久仁雄; 濱 克宏; 川瀬 啓一

    1999-01-01

    This technical report provides a comprehensive presentation the "Geoscientific Studies" performed since 1986, and new work for the "Earthquake Frontier Research for Terrestrial Subsurface" programme performed since 1995 in and around the Tono Mine, Gifu Prefecture. This technical report also provides fieldstop descriptions for visits to the Tono Mine. The descriptions are attached at the end of this report.

  4. Mine Water Treatment in Hongai Coal Mines

    OpenAIRE

    Dang Phuong Thao; Dang Vu Chi

    2018-01-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine ...

  5. Characterization of genotoxic response to 15 multiwalled carbon nanotubes with variable physicochemical properties including surface functionalizations in the FE1-Muta(TM) mouse lung epithelial cell line.

    Science.gov (United States)

    Jackson, Petra; Kling, Kirsten; Jensen, Keld Alstrup; Clausen, Per Axel; Madsen, Anne Mette; Wallin, Håkan; Vogel, Ulla

    2015-03-01

    Carbon nanotubes vary greatly in physicochemical properties. We compared cytotoxic and genotoxic response to 15 multiwalled carbon nanotubes (MWCNT) with varying physicochemical properties to identify drivers of toxic responses. The studied MWCNT included OECD Working Party on Manufactured Nanomaterials (WPMN) (NM-401, NM-402, and NM-403), materials (NRCWE-026 and MWCNT-XNRI-7), and three sets of surface-modified MWCNT grouped by physical characteristics (thin, thick, and short I-III, respectively). Each Groups I-III included pristine, hydroxylated and carboxylated MWCNT. Group III also included an amino-functionalized MWCNT. The level of surface functionalization of the MWCNT was low. The level and type of elemental impurities of the MWCNT varied by <2% of the weight, with exceptions. Based on dynamic light scattering data, the MWCNT were well-dispersed in stock dispersion of nanopure water with 2% serum, but agglomerated and sedimented during exposure. FE1-Muta(TM) Mouse lung epithelial cells were exposed for 24 hr. The levels of DNA strand breaks (SB) were evaluated using the comet assay, a screening assay suitable for genotoxicity testing of nanomaterials. Exposure to MWCNT (12.5-200 µg/ml) did not induce significant cytotoxicity (viability above 92%). Cell proliferation was reduced in highest doses of some MWCNT after 24 hr, and was associated with generation of reactive oxygen species and high surface area. Increased levels of DNA SB were only observed for Group II consisting of MWCNT with large diameters and high Fe2 O3 and Ni content. Significantly, increased levels of SB were only observed at 200 µg/ml of MWCNT-042. Overall, the MWCNT were not cytotoxic and weakly genotoxic after 24 hr exposure to doses up to 200 µg/ml. © 2014 Wiley Periodicals, Inc.

  6. 78 FR 58567 - Criteria to Certify Coal Mine Rescue Teams

    Science.gov (United States)

    2013-09-24

    ... Safety and Health Administration Criteria to Certify Coal Mine Rescue Teams AGENCY: Mine Safety and... mine rescue team training. MSHA prescribes training materials through the issuance of instruction guides. Existing standards for coal mine rescue teams include criteria for mine operators to certify the...

  7. Integrated mined-area reclamation and land use planning. Volume 3A. A case study of surface mining and reclamation planning: South Boulder Creek Park Project, Sand and Gravel Operations, Boulder, Colorado

    Energy Technology Data Exchange (ETDEWEB)

    Lewis, L R; Perry, A O; LaFevers, J R

    1977-02-01

    This case study details reclamation planning for the Flatiron Companies' South Boulder Creek Park Project in Boulder, Colorado. The site contains a deposit of high-quality sand and gravel considered to be one of the best and largest known deposits of aggregate materials in the Front Range area. The aggregate deposit is located in a highly visible site just off the Denver-Boulder Turnpike at the entrance to the city from Denver, and adjacent to a residential portion of the city. In order to make maximum use of pre-mining planning, as a tool for resolving a conflict over the company's proposed operation, an extensive cooperative planning effort was initiated. This included the preparation of an environmental impact assessment, numerous public hearings, operating and reclamation plan review by city authorities, annexation of the site to the city, and the granting of a scenic easement on the property to the city for the development of a regional recreation park. A suite of contractual agreements was worked out among Flatiron Companies, the City of Boulder, the Colorado Open Lands Foundation, and the Federal Bureau of Outdoor Recreation. The purpose of this case study is to allow the planner to gain insight into the procedures, possibilities, and constraints involved in premining planning in a cooperative situation.

  8. Disposal project for LLW and VLLW generated from research facilities in Japan: A feasibility study for the near surface disposal of VLLW that includes uranium

    International Nuclear Information System (INIS)

    Sakai, Akihiro; Hasegawa, M.; Sakamoto, Y.; Nakatani, T.

    2016-01-01

    Conclusion and future work: • JAEA plans trench disposal of U-bearing waste with less than 100 Bq/g. • Two safety measures of trench disposal of U-bearing waste have been discussed taking into account increasing radioactivity over a long period of time. 1. First is to carry out dose assessment of site use scenario by using a conservatively stylized condition. 2. Second is to control the average concentration of U in the trench facilities based on the concept of the existing exposure situation. • We are continuously developing the method for safety measures of near surface disposal of VLLW including U-bearing waste.

  9. The modernisation of mining

    CSIR Research Space (South Africa)

    Ritchken, E

    2017-10-01

    Full Text Available This presentation discusses the modernisation of mining. The presentation focuses on the mining clusters, Mining Challenges, Compliance versus Collaboration, The Phakisa, The Mining Precinct & the Mining Hub also Win-Win Beneficiation: Iron...

  10. Extending mine life

    International Nuclear Information System (INIS)

    Anon.

    1984-01-01

    Mine layouts, new machines and techniques, research into problem areas of ground control and so on, are highlighted in this report on extending mine life. The main resources taken into account are coal mining, uranium mining, molybdenum and gold mining

  11. A plot tree structure to represent surface flow connectivity in rural catchments: definition and application for mining critical source areas and temporal conditions

    Science.gov (United States)

    Gascuel-Odoux, Chantal; Cordier, Marie-Odile; Grimaldi, Catherine; Salmon-Monviola, Jordy; Masson, Veronique; Squividant, Herve; Trepos, Ronan

    2013-04-01

    Agricultural landscapes are structured by a mosaic of farmers'fields whose boundaries and land use change over time, and by linear elements such as hedgerows, ditches and roads, which are more or less connected to each other. Such man-made features are now well known to have an effect on catchment hydrology, erosion and water quality. In such agricultural landscapes, it is crucial to have an adequate functional representation of the flow pathways and define relevant indicators of surface flow connectivity over the catchment towards the stream, as a necessary step for improving landscape design and water protection. A new conceptual object oriented approach has been proposed by building the drainage network on the identification of the inlets and outlets for surface water flow on each farmers' field and surrounding landscape elements (Aurousseau et al., 2009 ; Gascuel-Odoux et al., 2011), then on delineating a set of elementary plot outlet trees labelled by attributes which feed the stream. This drainage network is therefore represented as a global plot outlet tree which conceptualizes the connectivity of the surface flow patterns over the catchment. This approach has been applied to different catchment areas, integrated in modelling (Gascuel-Odoux et al., 2009) and decision support tools. It provides a functional display of data for decision support which can highlight the plots of potential risk regarding the surface runoff, areas which are often shortly extended over catchments (suspended sediment application). Integrated in modelling and mining tools, it allows to catch typologies of the most spatial pattern involved in water quality degradation (herbicides transport model) (Trepos et al., 2012) and test their permanency in time regarding the variations of climate conditions and agricultural practices (Salmon-Monviola et al., 2011). This set of works joins skills in hydrology, agronomy and computer sciences. Aurousseau P., Gascuel-Odoux C., Squividant H

  12. Impact of ground water - surface water interactions on pore-water and solid sediment phase composition of an acidic mining lake

    Science.gov (United States)

    Beer, J.; Neumann, C.; Fleckenstein, J.; Peiffer, S.; Blodau, C.

    2009-04-01

    Biogeochemical processes in lake sediments are influenced by diffusive and advective supply of solutes from lake and ground water. It has been demonstrated that the pore-water pH in lake sediments characterized by low pH and high concentrations of iron and sulfur (e.g. acidic mining lakes) are significantly affected by exchange flows with moderately acidic or near-neutral ground water (Blodau 20041). The resulting pore-water pH is a master variable which controls many biogeochemical processes such as mineral transformations, the reduction of iron and sulfate, etc. The aim of this study was to investigate whether inflow of ground water into an acidic mining lake leads to a shift from acidic, iron-reducing to near-neutral, sulfate-reducing and pyrite-precipitating conditions within the lake sediment. Therefore, we investigated ground-water advection rates among different sites and related them to concentration-depth profiles of relevant chemical species, and the composition of the solid sediment phase. We observed a heterogeneous pattern of ground water - surface water exchange within the lake. In shallow areas, ground water inflow occurred in the northern part (up to 7 L m-2 d-1) of the lake and outflow (up to 3 L m-2 d-1) in the southern part. In deeper areas, ground water generally infiltrated into the lake with rates of up to 6 L m-2 d-1except one site (> 200 L m-2 d-1). Advective transport affected pore-water concentrations of ferrous iron and sulfate which both ranged from 5 to 30 mmol L-1. Additionally, concentration-depth profiles of these dissolved species were altered by other processes such as schwertmannite transformation, and iron and sulfate reduction. Ground water - surface water exchange flows caused apparent differences in the pore-water pH: under outflow or low inflow conditions the pore water was more acidic (below pH 3.5) compared to the other sites (pH up to 6). Since sulfate reduction is pH-controlled the observed differences in the pore-water p

  13. Is there an association of circulatory hospitalizations independent of mining employment in coal-mining and non-coal-mining counties in west virginia?

    Science.gov (United States)

    Talbott, Evelyn O; Sharma, Ravi K; Buchanich, Jeanine; Stacy, Shaina L

    2015-04-01

    Exposures associated with coal mining activities, including diesel fuel exhaust, products used in coal processing, and heavy metals and other forms of particulate matter, may impact the health of nearby residents. We investigated the relationships between county-level circulatory hospitalization rates (CHRs) in coal and non-coal-mining communities of West Virginia, coal production, coal employment, and sociodemographic factors. Direct age-adjusted CHRs were calculated using West Virginia hospitalizations from 2005 to 2009. Spatial regressions were conducted to explore associations between CHR and total, underground, and surface coal production. After adjustment, neither total, nor surface, nor underground coal production was significantly related to rate of hospitalization for circulatory disease. Our findings underscore the significant role sociodemographic and behavioral factors play in the health and well-being of coal mining communities.

  14. Cost of mining Eastern coal

    International Nuclear Information System (INIS)

    Anon.

    1990-01-01

    This paper, Chapter 7.2.3 of the 'surface mining' reference book, gives an example of how the cost of mining a ton of coal is calculated. Conditions set down are for a coal tract of 50.6 ha in West Virginia, USA to be mined by the contour surface method, the seam being 101.6cm thick. Elements of the costing are: permitting and bonding costs, engineering and construction costs, equipment and other operating expenses (such as hauling and wheeling), royalties, direct taxes and fees, costs of revegetation, and employment costs (payroll and medical expenses). 5 tabs

  15. Mine waste management legislation. Gold mining areas in Romania

    Science.gov (United States)

    Maftei, Raluca-Mihaela; Filipciuc, Constantina; Tudor, Elena

    2014-05-01

    Problems in the post-mining regions of Eastern Europe range from degraded land and landscapes, huge insecure dumps, surface cracks, soil pollution, lowering groundwater table, deforestation, and damaged cultural potentials to socio economic problems like unemployment or population decline. There is no common prescription for tackling the development of post-mining regions after mine closure nor is there a common definition of good practices or policy in this field. Key words : waste management, legislation, EU Directive, post mining Rosia Montana is a common oh 16 villages; one of them is also called Rosia Montana, a traditional mining Community, located in the Apuseni Mountains in the North-Western Romania. Beneath part of the village area lays one of the largest gold and silver deposits in Europe. In the Rosia Montana area mining had begun ever since the height of the Roman Empire. While the modern approach to mining demands careful remediation of environmental impacts, historically disused mines in this region have been abandoned, leaving widespread environmental damage. General legislative framework Strict regulations and procedures govern modern mining activity, including mitigation of all environmental impacts. Precious metals exploitation is put under GO no. 190/2000 re-published in 2004. The institutional framework was established and organized based on specific regulations, being represented by the following bodies: • The Ministry of Economy and Commerce (MEC), a public institution which develops the Government policy in the mining area, also provides the management of the public property in the mineral resources area; • The National Agency for the development and implementation of the mining Regions Reconstruction Programs (NAD), responsible with promotion of social mitigation measures and actions; • The Office for Industry Privatization, within the Education Ministry, responsible with privatization of companies under the CEM; • The National

  16. Correlation of Earthquake Locations with Volumetric Source Components in TauTona Gold Mine, South Africa

    Science.gov (United States)

    Kane, D. L.; Boettcher, M. S.

    2013-12-01

    We investigate the source characteristics of earthquakes in TauTona Gold Mine, South Africa, to test if the location of earthquakes relative to mining structures is correlated with significant isotropic source behavior. Earthquakes are well monitored in TauTona Mine, where underground near-source stations record smaller events and higher frequency energy than can generally be observed using surface stations. Our dataset includes -4 mine, including faults, dikes, tunnels, and stopes, are well known from detailed geologic mapping and surveyed mine plans. We use data collected between 2004 and 2009 from the in-mine array (1-6 kHz), the Natural Earthquake Laboratory in South African Mines (NELSAM) project stations (6-12 kHz), and a short-term PASSCAL experiment (200 Hz) to study source mechanism variability and correlation with mapped structures within the mine. Previous studies of earthquakes in mines suggest a relationship between earthquake size and isotropic moment tensor source characteristics. In TauTona Mine, earthquakes with significant implosive source characteristics tend to be infrequent, larger events (Mw > 1.5), whereas earthquakes with significant explosive source characteristics tend to be smaller (Mw closure of tunnels and stopes within the mine, whereas the smallest recorded explosive events can be interpreted as opening cracks that form at the edges of mining structures. Double-couple type sources occur throughout the full magnitude range, and are often located along mapped faults and dikes. We focus our analysis on earthquakes located near the NELSAM stations in the deepest part of the mine, and on earthquakes located at depths greater than the current extent of mining. High precision relative hypocenter relocation performed using the 3-D extensive seismic array provides excellent constraints on location of events. We compute full moment tensor solutions for events using amplitude measurements of individual arrival phases, including nearfield phases

  17. 30 CFR 75.310 - Installation of main mine fans.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Installation of main mine fans. 75.310 Section... mine fans. (a) Each main mine fan shall be— (1) Installed on the surface in an incombustible housing... that gives a signal at the mine when the fan either slows or stops. A responsible person designated by...

  18. 30 CFR 716.5 - Anthracite coal mines.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Anthracite coal mines. 716.5 Section 716.5... PROGRAM REGULATIONS SPECIAL PERFORMANCE STANDARDS § 716.5 Anthracite coal mines. (a) Permittees of anthracite surface coal mining and reclamation operations in those States where the mines are regulated by...

  19. Post-mining in France

    International Nuclear Information System (INIS)

    2007-01-01

    This plentifully illustrated book aims at showing how new equilibria are building up during the transition between mining activity and post-mining, and at stressing on the necessity to keep up the cultural elements, the competencies and knowledge of mining works. The first chapter - mine and men - shows the importance of mineral substances in the objects of the everyday life, illustrates the importance of the mining tradition in France and describes the technical and administrative organisation of the end of the mining activity (works, rehabilitation, regulation, monitoring..). Chapter two - exploitation methods - presents the surface and underground facilities and their impact on the environment (extraction machines, workshops, ore processing plants, decantation ponds..). The third chapter deals with the rehabilitation and monitoring aspects: impact of mining activity stoppage on underground and surface waters, land stability, soils cleansing.. The last chapter summarizes the history of French mining region by region: Nord-Pas-de-Calais, Lorraine-Alsace, Massif central, Bretagne-Normandie, Provence-Alpes-Cote d'Azur and Pyrenees

  20. Geochemical Characterization of Mine Waste, Mine Drainage, and Stream Sediments at the Pike Hill Copper Mine Superfund Site, Orange County, Vermont

    Science.gov (United States)

    Piatak, Nadine M.; Seal, Robert R.; Hammarstrom, Jane M.; Kiah, Richard G.; Deacon, Jeffrey R.; Adams, Monique; Anthony, Michael W.; Briggs, Paul H.; Jackson, John C.

    2006-01-01

    The Pike Hill Copper Mine Superfund Site in the Vermont copper belt consists of the abandoned Smith, Eureka, and Union mines, all of which exploited Besshi-type massive sulfide deposits. The site was listed on the U.S. Environmental Protection Agency (USEPA) National Priorities List in 2004 due to aquatic ecosystem impacts. This study was intended to be a precursor to a formal remedial investigation by the USEPA, and it focused on the characterization of mine waste, mine drainage, and stream sediments. A related study investigated the effects of the mine drainage on downstream surface waters. The potential for mine waste and drainage to have an adverse impact on aquatic ecosystems, on drinking- water supplies, and to human health was assessed on the basis of mineralogy, chemical concentrations, acid generation, and potential for metals to be leached from mine waste and soils. The results were compared to those from analyses of other Vermont copper belt Superfund sites, the Elizabeth Mine and Ely Copper Mine, to evaluate if the waste material at the Pike Hill Copper Mine was sufficiently similar to that of the other mine sites that USEPA can streamline the evaluation of remediation technologies. Mine-waste samples consisted of oxidized and unoxidized sulfidic ore and waste rock, and flotation-mill tailings. These samples contained as much as 16 weight percent sulfides that included chalcopyrite, pyrite, pyrrhotite, and sphalerite. During oxidation, sulfides weather and may release potentially toxic trace elements and may produce acid. In addition, soluble efflorescent sulfate salts were identified at the mines; during rain events, the dissolution of these salts contributes acid and metals to receiving waters. Mine waste contained concentrations of cadmium, copper, and iron that exceeded USEPA Preliminary Remediation Goals. The concentrations of selenium in mine waste were higher than the average composition of eastern United States soils. Most mine waste was

  1. Analysis of changes in hardness of a metal surface layer in areas of high stress and methods of determining residual life of parts for mining machines

    Science.gov (United States)

    Zvonarev, I. E.; Ivanov, S. L.

    2016-02-01

    The methodological bases for determining the energy resource of mechanical transmissions details for mining machines are considered. Based on the analysis of the accumulation of damage in metal gears, a method of estimating residual life of coarse-toothed wheels by periodically measuring the hardness of the surface layer of the teeth is justified. The regularities in change of hardness of coarse-tooth gear, conditioned by a change in metal strength properties that take into account the micro- and macromechanisms of plastic and elastic deformation, distortion of the metal crystal lattice with formation and movement of vacancies and dislocations. Experimental setup was built and the results of laboratory experiments are given related to the process of destruction of non-standard samples under different loads. Comparison of dimensions and hardness values of the sample allows concluding that a larger deformation corresponds to a greater increase in hardness, their limit value for the material being in the fracture zone. It is established that the detected changes in the local hardness occurs in areas of increased stresses above the limit of proportionality and the work of fracture forces attributed to dislocations density adjacent to the fracture plane expressed in terms of hardness increment is constant.

  2. Abandoned Uranium Mine (AUM) Trust Mine Areas, Navajo Nation, 2016, US EPA Region 9

    Data.gov (United States)

    U.S. Environmental Protection Agency — This GIS dataset contains polygon features that represent mine areas included in the Navajo Environmental Response Trust. This mine category also includes Priority...

  3. Incorporating orphaned mine spoil reclamation into the mining plan

    Energy Technology Data Exchange (ETDEWEB)

    Gulliford, J.B.

    1978-06-13

    As a part of the coal mining and restoration research, a steeply sloped, forty acre pasture site of low agricultural productivity was chosen for Iowa Coal Project Demonstration Mine No. 1. During mining, 110,000 tons of coal were removed, impact on the surrounding environment was kept at a minimum and the site was restored to a series of level benched terraces suitable for intensive row crop production. Continuing experiments on this site will determine the effectiveness of the restoration with respect to environmental protection and agricultural productivity. As a part of this operation a unique project was initiated to develop a reclamation program for an abandoned surface mine site adjacent to the primary Demonstration Mine experiment.

  4. Social big data mining

    CERN Document Server

    Ishikawa, Hiroshi

    2015-01-01

    Social Media. Big Data and Social Data. Hypotheses in the Era of Big Data. Social Big Data Applications. Basic Concepts in Data Mining. Association Rule Mining. Clustering. Classification. Prediction. Web Structure Mining. Web Content Mining. Web Access Log Mining, Information Extraction and Deep Web Mining. Media Mining. Scalability and Outlier Detection.

  5. Second-sphere complexation of thorium(IV) by cucurbit[6]uril with included perrhenate counterions. Crystal structure and Hirshfeld surface analysis

    Energy Technology Data Exchange (ETDEWEB)

    Thuery, Pierre [CEA, IRAMIS, UMR 3685 NIMBE, Laboratoire de Chimie Moleculaire et Catalyse pour l' Energie (LCMCE), Gif-sur-Yvette (France)

    2015-04-15

    The reaction of thorium(IV) nitrate with cucurbit[6]uril (CB6) in the presence of perrhenic acid in water gives the complex [Th(NO{sub 3})(H{sub 2}O){sub 8}][(ReO{sub 4})(CB6)](ReO{sub 4}){sub 2}.3H{sub 2}O (1). Aquated cations are held at both CB6 portals by ion-dipole and hydrogen-bonding interactions, and one of the ReO{sub 4}{sup -} anions is included in the CB6 cavity. The packing displays columns of alternate cations and encapsulated anions. Hirshfeld surfaces are used to visualize short contacts between the species present. (Copyright copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  6. The remediation of abandoned workings of a mining area in Ningxiang uranium mine

    International Nuclear Information System (INIS)

    Liu Yaochi; Zhou Xinghuo; Liu Bing

    2004-01-01

    The typical mining under buildings and river was used in a mining area of Ningxiang uranium mine. After the mining ended, 32.1% of the 2.68 m 3 abandoned workings did not fill because of limitation of the cut-and-fill mining method at that time. To remedy this, the mine used new filling methods. After the remedial action, the filling coefficient of pits reached 100%, and that of tunnels reached 86%. It can be proved by the monitoring data that the subsiding of surface has been effectively controlled at the abandoned workings

  7. Environmental restoration. Stabilization of mining tailing and uranium mineral

    International Nuclear Information System (INIS)

    Perez, C.; Carboneras, P.

    1998-01-01

    ENRESA has dismantling a uranium mill facility and restored the site since 1991 to 1994. Since 1997, 19 uranium mines are being re mediated. The Andujar uranium mill was operational since 1959 to 1981. The remedial action plan performed in the Andujar mill site involved stabilizing and consolidating the uranium mill tailings and contaminated materials in place. Mill equipment, building and process facilities have been dismantled and demolished and the resulting metal wastes and debris have been placed in the pile. The tailings mass has been reshape by flattening the side slopes and cover system was placed over the pile. The uranium mines are located in Extremadura and Andalucia. There is a great diversity among the mines in terms of the magnitude of the disturbed areas by mining work and the effects on the environment, including excavations, waste rock piles, abandoned shafts and galleries, and remaining of surface structures and facilities. Remedial measures include the sealing for shafts and openings to prevent collapse of mine workings and subsidence, the dewatering and the open-pit excavation and the treatment of the contaminated waters, the disposal and the stabilization of mining debris piles to prevent dispersion, the placement of a re vegetated cover over the piles to control dust and erosion, and the restoration of the site. (Author)

  8. Impact of mining and forest regeneration on small mammal biodiversity in the Western Region of Ghana.

    Science.gov (United States)

    Attuquayefio, Daniel K; Owusu, Erasmus H; Ofori, Benjamin Y

    2017-05-01

    Much of the terrestrial biodiversity in sub-Saharan Africa is supported by tropical rainforest. Natural resource development, particularly surface mining in the rainforest, poses great risks to the region's rich and endemic biodiversity. Here, we assessed the impact of surface mining and the success of forest rehabilitation on small mammal diversity in the Western Region of Ghana. We surveyed small mammals in the project area and two adjoining forest reserves (control sites) before the mining operation and 10 years after mine closure and forest rehabilitation (topsoil replacement and revegetation). The forest reserves recorded higher species abundance than the mining areas. Majority of the species captured in the forest reserves, including Hylomyscus alleni, Praomys tullbergi, Malacomys cansdalei, and Hybomys trivirgatus, are forest obligate species. Only one individual each of H. alleni and P. tullbergi was captured in the naturally regenerated areas (core areas of mining activities that were allowed to revegetate naturally), while 32 individuals belonging to four species (Lophuromys sikapusi, Mus musculoides, Mastomys erythroleucus, and Crocidura olivieri) were recorded in the rehabilitated areas. Our data suggested negative effects of mining on small mammal diversity and the restoration of species diversity and important ecological processes after rehabilitation of altered habitats. We strongly encourage deliberate conservation efforts, particularly the development of management plans that require the restoration of degraded land resulting from mining activities.

  9. Mine seismicity and the Comprehensive Nuclear Test Ban Treaty

    Energy Technology Data Exchange (ETDEWEB)

    Chiappetta, F. [Blasting Analysis International, Allentown, PA (United States); Heuze, F.; Walter, W. [Lawrence Livermore National Lab., CA (United States); Hopler, R. [Powderman Consulting Inc., Oxford, MD (United States); Hsu, V. [Air Force Technical Applications Center, Patrick AFB, FL (United States); Martin, B. [Thunder Basin Coal Co., Wright, WY (United States); Pearson, C. [Los Alamos National Lab., NM (United States); Stump, B. [Southern Methodist Univ., Dallas, TX (United States); Zipf, K. [Univ. of New South Wales (Australia)

    1998-12-09

    Surface and underground mining operations generate seismic ground motions which are created by chemical explosions and ground failures. It may come as a surprise to some that the ground failures (coal bumps, first caves, pillar collapses, rockbursts, etc.) can send signals whose magnitudes are as strong or stronger than those from any mining blast. A verification system that includes seismic, infrasound, hydroacoustic and radionuclide sensors is being completed as part of the CTBT. The largest mine blasts and ground failures will be detected by this system and must be identified as distinct from signals generated by small nuclear explosions. Seismologists will analyze the seismic records and presumably should be able to separate them into earthquake-like and non earthquake-like categories, using a variety of so-called seismic discriminants. Non-earthquake essentially means explosion- or implosion-like. Such signals can be generated not only by mine blasts but also by a variety of ground failures. Because it is known that single-fired chemical explosions and nuclear explosion signals of the same yield give very similar seismic records, the non-earthquake signals will be of concern to the Treaty verification community. The magnitude of the mine-related events is in the range of seismicity created by smaller nuclear explosions or decoupled tests, which are of particular concern under the Treaty. It is conceivable that legitimate mining blasts or some mine-induced ground failures could occasionally be questioned. Information such as shot time, location and design parameters may be all that is necessary to resolve the event identity. In rare instances where the legitimate origin of the event could not be resolved by a consultation and clarification procedure, it might trigger on On-Site Inspection (OSI). Because there is uncertainty in the precise location of seismic event as determined by the International Monitoring System (IMS), the OSI can cover an area of up to 1

  10. Mineral Classification of Land Surface Using Multispectral LWIR and Hyperspectral SWIR Remote-Sensing Data. A Case Study over the Sokolov Lignite Open-Pit Mines, the Czech Republic

    Directory of Open Access Journals (Sweden)

    Gila Notesco

    2014-07-01

    Full Text Available Remote-sensing techniques offer an efficient alternative for mapping mining environments and assessing the impacts of mining activities. Airborne multispectral data in the thermal region and hyperspectral data in the optical region, acquired with the Airborne Hyperspectral Scanner (AHS sensor over the Sokolov lignite open-pit mines in the Czech Republic, were analyzed. The emissivity spectrum was calculated for each vegetation-free land pixel in the longwave infrared (LWIR-region image using the surface-emitted radiation, and the reflectance spectrum was derived from the visible, near-infrared and shortwave-infrared (VNIR–SWIR-region image using the solar radiation reflected from the surface, after applying atmospheric correction. The combination of calculated emissivity, with the ability to detect quartz, and SWIR reflectance spectra, detecting phyllosilicates and kaolinite in particular, enabled estimating the content of the dominant minerals in the exposed surface. The difference between the emissivity values at λ = 9.68 µm and 8.77 µm was found to be a useful index for estimating the relative amount of quartz in each land pixel in the LWIR image. The absorption depth at around 2.2 µm in the reflectance spectra was used to estimate the relative amount of kaolinite in each land pixel in the SWIR image. The resulting maps of the spatial distribution of quartz and kaolinite were found to be in accordance with the geological nature and origin of the exposed surfaces and demonstrated the benefit of using data from both thermal and optical spectral regions to map the abundance of the major minerals around the mines.

  11. Mine Water Treatment in Hongai Coal Mines

    Science.gov (United States)

    Dang, Phuong Thao; Dang, Vu Chi

    2018-03-01

    Acid mine drainage (AMD) is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  12. Mine Water Treatment in Hongai Coal Mines

    Directory of Open Access Journals (Sweden)

    Dang Phuong Thao

    2018-01-01

    Full Text Available Acid mine drainage (AMD is recognized as one of the most serious environmental problem associated with mining industry. Acid water, also known as acid mine drainage forms when iron sulfide minerals found in the rock of coal seams are exposed to oxidizing conditions in coal mining. Until 2009, mine drainage in Hongai coal mines was not treated, leading to harmful effects on humans, animals and aquatic ecosystem. This report has examined acid mine drainage problem and techniques for acid mine drainage treatment in Hongai coal mines. In addition, selection and criteria for the design of the treatment systems have been presented.

  13. Monitoring of the mercury mining site Almadén implementing remote sensing technologies.

    Science.gov (United States)

    Schmid, Thomas; Rico, Celia; Rodríguez-Rastrero, Manuel; José Sierra, María; Javier Díaz-Puente, Fco; Pelayo, Marta; Millán, Rocio

    2013-08-01

    The Almadén area in Spain has a long history of mercury mining with prolonged human-induced activities that are related to mineral extraction and metallurgical processes before the closure of the mines and a more recent post period dominated by projects that reclaim the mine dumps and tailings and recuperating the entire mining area. Furthermore, socio-economic alternatives such as crop cultivation, livestock breeding and tourism are increasing in the area. Up till now, only scattered information on these activities is available from specific studies. However, improved acquisition systems using satellite borne data in the last decades opens up new possibilities to periodically study an area of interest. Therefore, comparing the influence of these activities on the environment and monitoring their impact on the ecosystem vastly improves decision making for the public policy makers to implement appropriate land management measures and control environmental degradation. The objective of this work is to monitor environmental changes affected by human-induced activities within the Almadén area occurring before, during and after the mine closure over a period of nearly three decades. To achieve this, data from numerous sources at different spatial scales and time periods are implemented into a methodology based on advanced remote sensing techniques. This includes field spectroradiometry measurements, laboratory analyses and satellite borne data of different surface covers to detect land cover and use changes throughout the mining area. Finally, monitoring results show that the distribution of areas affected by mercury mining is rapidly diminishing since activities ceased and that rehabilitated mining areas form a new landscape. This refers to mine tailings that have been sealed and revegetated as well as an open pit mine that has been converted to an "artificial" lake surface. Implementing a methodology based on remote sensing techniques that integrate data from

  14. Large Mines and the Community

    International Development Research Centre (IDRC) Digital Library (Canada)

    Diavik Mine, Northwest Territories, Canada: This large-scale diamond mine in a very remote area of northern Canada is scheduled to open in 2003. The inhabitants of the region ...... Technical services: This activity included the areas of geology, remote sensing, laboratory analysis and drilling. Although the activity reached ...

  15. Impact of mining on the environment

    Energy Technology Data Exchange (ETDEWEB)

    Dirner, V.; Kulova, E.; Dobes, A. [Technical Univ. Of Ostrava, Ostrava (Czech Republic). Faculty of Mining and Geology, Inst. of Environmental Engineering

    2010-07-01

    Coal mining continues to be among the most widespread and most intense mining activity, which disturbs the surrounding landscape. This paper examined the impact of mining on the environment in the Czech Republic. It outlined the different types of mining methods such as underground mining, opencast mining, and other geotechnical mining methods and identified black and brown coal fields in the Czech Republic. Each of the mining methods was described in detail. Environmental issues of deposit exploration, mining and its termination were also discussed. The paper also examined the process of assessing the impacts of exploratory and mining activities also known as environmental impact assessment. Environmental impact assessment topics that were identified and discussed included refuse from mining and preparation; disposal mining; characteristics of waste disposal mining; reasons and preconditions for underground waste disposal; a conceptual approach to dealing with underground waste disposal issues; assessment of neural conditions for waste disposal mining; geological structure of the massif; hydrogeological conditions; petrographic composition, physical and mechanical properties of rocks; geomechanical assessment of the massif; and evaluation of geomechanical conditions. It was concluded that the locality must be assessed in terms of geochemistry as it is necessary to take into account the issue of geochemical stability of water-air-rock phase interface. 17 refs., 4 tabs., 4 figs.

  16. Seventh symposium on coal mine drainage research. NCA/BCR coal conference and Expo IV

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-01-01

    The Seventh Symposium on Coal Mine Drainage Research, sponsored by the National Coal Association and Bituminous Coal Research, Inc., was held at the Kentucky Fair and Exposition Center, Louisville, Kentucky, October 18-20, 1977. Seventeen papers from the proceedings have been entered individually into EDB and ERA. Topics covered include chemical reactions of pyrite oxidation and acid formation in spoil banks, abandoned mines, etc., formation of small acid lakes from the drainage and their neutralization by natural and other neutralization measures, trace elements in acid mine drainage, ground water contamination, limnology, effects of surface mined ground reclamation and neutralization, water purification and treatment, mining and coal preparation plant waste disposal, ash and fly ash disposal (to minimize leaching from the wastes), runoff from large coal storage stockpiles during storms (prevention of environmental effects by collection and neutralization by passing through an ash pond). (LTN)

  17. Development of subsidence profile functions for longwall mining associated with weak floor strata considering time effects

    International Nuclear Information System (INIS)

    Yu, Z.; Chugh, Y.P.; Yang, G.

    1994-01-01

    Subsidence profile functions for longwall mining in the Illinois Coal Basin were developed for both the headgate and tailgate sides based on field observations of surface subsidence over several longwall panels. One function was applied to predict the subsidence profile for a longwall panel in another Illinois Coal Basin mine, where a good correlation between the predicted and measured results was achieved. Attempts were also made to develop subsidence profile functions including time effect. 4 refs., 9 figs., 1 tab

  18. Groundwater impacts of solution mining

    International Nuclear Information System (INIS)

    Peters, J.L.; Charbeneau, R.J.

    1985-01-01

    In some cases the mining of certain minerals can be achieved without the large-scale excavations involved in open pit or shaft mining. Instead, water is used to liquify the desired mineral so that it can be readily removed without disturbing the host medium or intervening deposits. In Texas this solution mining technique is used in the mining of brines, sodium sulfate, sulfur, and uranium. The advantages stem from the nondisturbing nature of the method that leaves the surface and subsurface physically intact. This is advantageous not only during mining, but also upon its termination when there is a minimum restoration requirement of the terrain. However, in some cases these advantages may be somewhat offset when a considerable chemical restoration of a host aquifer is required. The situation is considerably different with the solution (in situ) mining of uranium since these deposits often occur in usable quality groundwater aquifers. There are twenty-eight permitted sites in Texas. Eight have not yet been mined. This paper discusses the solution mining of uranium in Texas

  19. Assessment of background radiation exposures at Ranger Uranium Mine

    International Nuclear Information System (INIS)

    Kvasnicka, J.; Auty, R.

    1994-01-01

    The geology of a narrow strip (strip) between the Magela and Ranger Faults which includes both Ranger orebodies is more complex when compared with the sub-surface geology east and west of the strip. This fact was a major consideration when planning a retrospective assessment of the pre operation natural radiation background. The program and outcomes of the assessments are summarized in the paper. The experimental results of the program include the average pre-mining background external gamma-ray exposure-rate at 1 m above ground and the average surface radon flux from the ERA-Ranger Mine project area. Five pre-mining average external gamma-ray exposure-rates were estimated: 110μRh -1 (Orebody No. 1), 66.5 (Orebody No. 3), 30.2 (the strip), 9.7 (areas west of the strip) and 7.1 μ h -1 (areas east of the strip). The average radon flux for the five areas listed above was established as; 4.1, 2.5, 1.0, 0.23 and 0.13 Bq m -2 s -1 . The pre-mining radon daughter impact on the Jabiru township area was estimated as 0.12 mWL using an air dispersion model. This would be equal to an effective dose equivalent of 0.05 mSv per year assuming 100% occupancy. The maximum long-term average PAEC of radon daughters was estimated for Orebody No.1 area as above 3.8 mWL. Both PAECs of radon daughters should be understood as increments above the local background of about 2 to 3 mWL. It is proposed to adopt the above retrospectively estimated pre-mining radiological quantities as the pre-mining radiation background to be used when deriving radiological standards of the rehabilitation for the ERA-Ranger Mine project area. 11 refs., 9 tabs., 5 figs

  20. Methods for Estimating Water Withdrawals for Mining in the United States, 2005

    Science.gov (United States)

    Lovelace, John K.

    2009-01-01

    The mining water-use category includes groundwater and surface water that is withdrawn and used for nonfuels and fuels mining. Nonfuels mining includes the extraction of ores, stone, sand, and gravel. Fuels mining includes the extraction of coal, petroleum, and natural gas. Water is used for mineral extraction, quarrying, milling, and other operations directly associated with mining activities. For petroleum and natural gas extraction, water often is injected for secondary oil or gas recovery. Estimates of water withdrawals for mining are needed for water planning and management. This report documents methods used to estimate withdrawals of fresh and saline groundwater and surface water for mining during 2005 for each county and county equivalent in the United States, Puerto Rico, and the U.S. Virgin Islands. Fresh and saline groundwater and surface-water withdrawals during 2005 for nonfuels- and coal-mining operations in each county or county equivalent in the United States, Puerto Rico, and the U.S. Virgin Islands were estimated. Fresh and saline groundwater withdrawals for oil and gas operations in counties of six states also were estimated. Water withdrawals for nonfuels and coal mining were estimated by using mine-production data and water-use coefficients. Production data for nonfuels mining included the mine location and weight (in metric tons) of crude ore, rock, or mineral produced at each mine in the United States, Puerto Rico, and the U.S. Virgin Islands during 2004. Production data for coal mining included the weight, in metric tons, of coal produced in each county or county equivalent during 2004. Water-use coefficients for mined commodities were compiled from various sources including published reports and written communications from U.S. Geological Survey National Water-use Information Program (NWUIP) personnel in several states. Water withdrawals for oil and gas extraction were estimated for six States including California, Colorado, Louisiana, New

  1. Radiological control in a mine with a naturally-occurring radioactive material -NORM: III assessment of removable surface contamination in a pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    Pereira, W.S.; Py Junior, D.A.; Silva, A.C.A.; Garcia Filho, O., E-mail: pereiraws@gmail.com [Industrias Nucleares do Brasil (INB), Pocos de Caldas, MG (Brazil). Unidade de Tratamento de Minerio. Grupo Multidisciplinar de Radioprotecao; Kelecom, A., E-mail: akelecom@id.uff.br [Universidade Federal Fluminense (GETA/LARARA-PLS/UFF), Niteroi, RJ, (Brazil). Grupo de Estudos em Temas Ambientais. Lab. de Radiobiologia e Radiometria; Pereira, J.R.S., E-mail: pereirarsj@gmail.com [Universidade Federal de Alfenas (UNIFAL), Pocos de Caldas, MG (Brazil)

    2013-07-01

    Ore Treatment Unit (OUT) possesses a process laboratory. Considering the uranium ore processing, this laboratory works in close cooperation with the Radiation Protection Service of the Unit. In the year of 2009 a pilot plant for the development of solvent uranium extraction from the phosphate ore of the mine of Santa Quiteria city, in Ceara State, Brazil was developed. In this kind of plant the surface contamination may cause contamination for Occupational Exposed Individuals (OEI). In order to control this kind of contamination and offer a safety work's condition for OEIs, a monitoring program of transferable contamination using swab samples was developed. 162 swabs were made. For the alpha emitters the monitoring results varied from 0.001 Bq cm{sup -2} to 0.014 Bq cm{sup -2}, with average value of 0.002 Bq cm{sup -2}. For beta emitters the results varied from 0.010 Bq cm{sup -2} to 0.031 Bq cm{sup -2} with average equal to 0.011 Bq cm{sup -2}. For alpha emitters, 87.65 % of the results were below 0.004 Bq cm{sup -2}, values that are one order of magnitude smaller than the limit and the maximum value stayed in 35 % of the limit for an object to be considered contaminated. For beta emitters, 90 % of the results were below 0.010 Bq cm{sup -2} that corresponds to 25 % of the limit and 100 % were below 0.031 Bq cm{sup -2} below the limit for an object to be considered contaminated. In both cases any object monitored during the operation, was not considered contaminated, proving the good practices employed in the laboratory, resultant of the good planning of the Radiation Protection Service for the operations' process. (author)

  2. 30 CFR 716.2 - Steep-slope mining.

    Science.gov (United States)

    2010-07-01

    ... original contour restoration requirements. (1) This section applies to surface coal mining operations on... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Steep-slope mining. 716.2 Section 716.2 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR INITIAL PROGRAM...

  3. 30 CFR 816.79 - Protection of underground mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Protection of underground mining. 816.79 Section 816.79 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PERMANENT PROGRAM PERFORMANCE STANDARDS PERMANENT PROGRAM PERFORMANCE STANDARDS-SURFACE MINING...

  4. 30 CFR 785.14 - Mountaintop removal mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Mountaintop removal mining. 785.14 Section 785.14 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY...

  5. 30 CFR 785.13 - Experimental practices mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Experimental practices mining. 785.13 Section 785.13 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER...

  6. 30 CFR 785.15 - Steep slope mining.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Steep slope mining. 785.15 Section 785.15 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR SURFACE COAL MINING AND RECLAMATION OPERATIONS PERMITS AND COAL EXPLORATION SYSTEMS UNDER REGULATORY PROGRAMS...

  7. A guide to ventilation requirements for uranium mines and mills. Regulatory guide G-221

    International Nuclear Information System (INIS)

    2003-06-01

    The purpose of G-221 is to help persons address the requirements for the submission of ventilation-related information when applying for a Canadian Nuclear Safety Commission (CNSC) licence to site and construct, operate or decommission a uranium mine or mill. This guide is also intended to help applicants for a uranium mine or mill licence understand their operational and maintenance obligations with respect to ventilation systems, and to help CNSC staff evaluate the adequacy of applications for uranium mine and mill licences. This guide is relevant to any application for a CNSC licence to prepare a site for and construct, operate or decommission a uranium mine or mill. In addition to summarizing the ventilation-related obligations or uranium mine and mill licensee, the guide describes and discusses the ventilation-related information that licence applicants should typically submit to meet regulatory requirements. The guide pertains to any ventilation of uranium mines and mills for the purpose of assuring the radiation safety of workers and on-site personnel. This ventilation may be associated with any underground or surface area or premise that is licensable by the CNSC as part of a uranium mine or mill. These areas and premises typically include mine workings, mill buildings, and other areas or premises involving or potentially affected by radiation or radioactive materials. Some examples of the latter include offices, effluent treatment plants, cafeterias, lunch rooms and personnel change-rooms. (author)

  8. Strategizing Carbon-Neutral Mines: A Case for Pilot Projects

    Directory of Open Access Journals (Sweden)

    Ian M. Power

    2014-05-01

    Full Text Available Ultramafic and mafic mine tailings are a valuable feedstock for carbon mineralization that should be used to offset carbon emissions generated by the mining industry. Although passive carbonation is occurring at the abandoned Clinton Creek asbestos mine, and the active Diavik diamond and Mount Keith nickel mines, there remains untapped potential for sequestering CO2 within these mine wastes. There is the potential to accelerate carbonation to create economically viable, large-scale CO2 fixation technologies that can operate at near-surface temperature and atmospheric pressure. We review several relevant acceleration strategies including: bioleaching of magnesium silicates; increasing the supply of CO2 via heterotrophic oxidation of waste organics; and biologically induced carbonate precipitation, as well as enhancing passive carbonation through tailings management practices and use of CO2 point sources. Scenarios for pilot scale projects are proposed with the aim of moving towards carbon-neutral mines. A financial incentive is necessary to encourage the development of these strategies. We recommend the use of a dynamic real options pricing approach, instead of traditional discounted cash-flow approaches, because it reflects the inherent value in managerial flexibility to adapt and capitalize on favorable future opportunities in the highly volatile carbon market.

  9. Mining expansion reflects confidence in South Africa

    International Nuclear Information System (INIS)

    Van den Bosch, L.W.P.

    1982-01-01

    The South African mining industry for 1981 is discussed. Attention is given to the economics of the mining industry, including coal, gold, diamonds, uranium and platinum. In 1981 research was done on mining safety and labour conditions, as well as training

  10. Numerical modelling approach for mine backfill

    Indian Academy of Sciences (India)

    Muhammad Zaka Emad

    2017-07-24

    Jul 24, 2017 ... Abstract. Numerical modelling is broadly used for assessing complex scenarios in underground mines, including mining sequence and blast-induced vibrations from production blasting. Sublevel stoping mining methods with delayed backfill are extensively used to exploit steeply dipping ore bodies by ...

  11. Methane emissions from coal mining

    International Nuclear Information System (INIS)

    Williams, A.; Mitchell, C.

    1993-01-01

    This paper outlines some of the problems associated with the prediction of levels of methane emission from underground and surface coal mines. Current knowledge of coal mining emissions sources is outlined. On the basis of this information the methodology proposed by the IPCC/OECD Programme on National Inventories is critically examined and alternatives considered. Finally, the technical options for emissions control are examined together with their feasibility. 8 refs., 6 figs., 2 tabs

  12. Stanleigh mine, Rio Algom's deepest at 4500 ft

    International Nuclear Information System (INIS)

    Hawkins, T.

    1981-01-01

    Rio Algom's Stanleigh mine in Eliot Lake is being reopened and expanded. Operating levels are being developed at the 3700 and 3900 foot levels, with production from the 4100 foot level planned. A 30-year mine life is expected, with a seven-day milling capacity of 500 tpd. Mill startup will be July 1, 1983. Old workings are being isolated with airtight bulkheads to avoid ventilation and radioactive contamination problems. Thermoluminescent dosimeters are to be worn by all miners. Approximately one half of the $385 million investment will be in surface facilities, including water and tailings treatment facilities

  13. Data mining

    CERN Document Server

    Gorunescu, Florin

    2011-01-01

    The knowledge discovery process is as old as Homo sapiens. Until some time ago, this process was solely based on the 'natural personal' computer provided by Mother Nature. Fortunately, in recent decades the problem has begun to be solved based on the development of the Data mining technology, aided by the huge computational power of the 'artificial' computers. Digging intelligently in different large databases, data mining aims to extract implicit, previously unknown and potentially useful information from data, since 'knowledge is power'. The goal of this book is to provide, in a friendly way

  14. Mining the Mars Atmosphere

    Science.gov (United States)

    Finn, John E.; Sridhar, K. R.

    1997-01-01

    A series of concepts have been developed to mine the atmosphere of Mars and process it to extract or generate compressed carbon dioxide, compressed buffer gas mixtures of nitrogen and argon, water, oxygen, carbon monoxide, and/or carbon. Such products can be of use to science instruments, robotic, and human missions. The products can be for utility purposes, life support, propulsion (both interplanetary and on the planet's surface), and power generation.

  15. Open-pit mining of lignin waste storage

    Directory of Open Access Journals (Sweden)

    А. В. Михайлов

    2017-03-01

    Full Text Available The purpose of this paper is to develop performance criteria for fleet selection in surface mining of lignin as a raw material for factory-made fuel. The East Siberian Biotechnical Plant (ESBP proposes to close the Lignin Waste Storage (LWS at Tulun, Irkutsk Region of Russia. The LWS is a 9.6 ha facility used for the long-term storage of hydrolysis lignin and some fly ash. The project provided whole-year open-pit mining of lignin storage with one mining ledge within 3 years. Productivity – 1500 t/day or 447 000 t/year. Excavated lignin will be stockpile on the Pellet Plant territory for later processing. Part of this closure effort would involve constructing an artificial reservoir on the place of LWS. The objectives of this project were as follows: determine equipment needs and develop optimal procedures for the lignin excavation and transportation. Lignin moving may include site preparation, excavation, transportation and road surfacing. Lignin excavation is conduct by using techniques similar to those used for open-pit mining of peat. For this project, the excavator is the most important piece of equipment required for lignin removal and handling. The mining process consist of excavating the lignin (using Kraneks ЕК-270LC and hauling it to pellet plant via six off-road tractors&semitrailers (John Deere 7730& ISON-8520.

  16. Data mining methods

    CERN Document Server

    Chattamvelli, Rajan

    2015-01-01

    DATA MINING METHODS, Second Edition discusses both theoretical foundation and practical applications of datamining in a web field including banking, e-commerce, medicine, engineering and management. This book starts byintroducing data and information, basic data type, data category and applications of data mining. The second chapterbriefly reviews data visualization technology and importance in data mining. Fundamentals of probability and statisticsare discussed in chapter 3, and novel algorithm for sample covariants are derived. The next two chapters give an indepthand useful discussion of data warehousing and OLAP. Decision trees are clearly explained and a new tabularmethod for decision tree building is discussed. The chapter on association rules discusses popular algorithms andcompares various algorithms in summary table form. An interesting application of genetic algorithm is introduced inthe next chapter. Foundations of neural networks are built from scratch and the back propagation algorithm is derived...

  17. Underground mining operation supports

    Energy Technology Data Exchange (ETDEWEB)

    Khusid, M.B.; Kozel, A.M.

    1980-12-10

    Underground mining operation supports include the supporting layer surrounded by a cylindrical jacket of cemented rock. To decrease the loss of support material due to the decreasing rock pressure on the supporting layer, the cylindrical jacket of cemented rock has an uncemented layer inside, dividing it into 2 concentric cylindrical parts.

  18. Frequent pattern mining

    CERN Document Server

    Aggarwal, Charu C

    2014-01-01

    Proposes numerous methods to solve some of the most fundamental problems in data mining and machine learning Presents various simplified perspectives, providing a range of information to benefit both students and practitioners Includes surveys on key research content, case studies and future research directions

  19. Electrical injuries in the US mining industry, 2000-2009.

    Science.gov (United States)

    Homce, G T; Cawley, J C

    The U.S. National Institute for Occupational Safety and Health (NIOSH) Office of Mine Safety and Health Research (OMSHR) conducted a study of mining industry electrical injuries reported to the U.S. Mine Safety and Health Administration (MSHA) for the years 2000 to 2009. The findings of that study are detailed in this paper, and serve to characterize the circumstances surrounding electrical injuries and identify causal factors. The study included three tasks: 1) a direct review of mining industry occupational injury data compiled by MSHA, 2) interpretation of the narrative descriptions available for the injuries (from MSHA data) and 3) a separate examination of fatal electrical injuries. Eight-hundred sixty-five electrical injuries were reported during the 10-year period studied, with 39 of those being fatalities. This makes electrical injuries disproportionately fatal with respect to most other types of injuries in mining. Electrical injury rates were higher in coal mining than noncoal mining and, within the coal sector, rates were higher in underground operations than in surface operations. Of the 865 total cases, electrical and machine maintenance or repair activities were involved in 580 (69%), and electricians and mechanics were injured in 362 cases (42%). Of the 39 fatal electrical injuries, 27 (69%) involved electrical maintenance or repair work, and in 21 of these 27 cases, the failure to de-energize, lock-out and tag the circuit was the cause or a contributing factor. Also, contractor employees had a much greater chance of an electrical injury being fatal than did mine operator employees. The top three root causes for fatal electrical injuries were 1) no or inadequate lock-out and tagging, 2) failure of power system components and 3) contact of overhead electrical power lines by mobile equipment.

  20. Estimates of effective elastic thickness of oceanic lithosphere using model including surface and subsurface loads and effective elastic thickness of subduction zones

    Science.gov (United States)

    Yang, A.; Yongtao, F.

    2016-12-01

    The effective elastic thickness (Te) is an important parameter that characterizes the long term strength of the lithosphere, which has great significance on understanding the mechanical properties and evolution of the lithosphere. In contrast with many controversies regarding elastic thickness of continent lithosphere, the Te of oceanic lithosphere is thought to be in a simple way that is dependent on the age of the plate. However, rescent studies show that there is no simple relationship between Te and age at time of loading for both seamounts and subduction zones. As subsurface loading is very importand and has large influence in the estimate of Te for continent lithosphere, and many oceanic features such as subduction zones also have considerable subsurface loading. We introduce the method to estimate the effective elastic thickness of oceanic lithosphere using model including surface and subsurface loads by using free-air gravity anomaly and bathymetric data, together with a moving window admittance technique (MWAT). We use the multitaper spectral estimation method to calculate the power spectral density. Through tests with synthetic subduction zone like bathymetry and gravity data show that the Te can be recovered in an accurance similar to that in the continent and there is also a trade-off between spatial resolution and variance for different window sizes. We estimate Te of many subduction zones (Peru-Chile trench, Middle America trench, Caribbean trench, Kuril-Japan trench, Mariana trench, Tonga trench, Java trench, Ryukyu-Philippine trench) with an age range of 0-160 Myr to reassess the relationship between elastic thickness and the age of the lithosphere at the time of loading. The results do not show a simple relationship between Te and age.