WorldWideScience

Sample records for surface dispersion law

  1. Experimental testing of the dispersion law of ultracold neutrons

    International Nuclear Information System (INIS)

    Bondarenko, I.V.; Krasnoperov, A.V.; Frank, A.I.; Geltenbort, P.; Hoghoj, P.; Klein, A.G.; Cimmino, A.; Masalovich, S.V.; Nosov, V.G.

    1998-01-01

    Experiment on testing the generally accepted laws on ultracold neutron dispersion is described. The experiment is based on search of displacement lines of a neutron interference filter resonance by variation of neutrons rapidity component, parallel to the filter surface. The first results testify to the presence of statistically meaningful effect

  2. Acoustomagnetoelectric effect in nondegenerate semiconductor with nonparabolic energy dispersion law

    International Nuclear Information System (INIS)

    Mensah, N.G.; Nkrumah, G.; Mensah, S.Y.; Allotey, F.K.A.

    2007-10-01

    We have studied acoustomagnetoelectric effect in nondegenerate semiconductor with nonparabolic energy dispersion Law. Attention was focused on the surface acoustomagnetoelectric effect (SAME). This is to reduce Joule's energy dissipated in the sample. It was observed that in a weak magnetic field the SAME is proportional to H 2 whiles in strong magnetic field it is independent of H. The effect is also dependent on the the scattering mechanism and finally SAME changes sign when the magnetic field is turned through 90 deg. (author)

  3. Fractional power-law spatial dispersion in electrodynamics

    International Nuclear Information System (INIS)

    Tarasov, Vasily E.; Trujillo, Juan J.

    2013-01-01

    Electric fields in non-local media with power-law spatial dispersion are discussed. Equations involving a fractional Laplacian in the Riesz form that describe the electric fields in such non-local media are studied. The generalizations of Coulomb’s law and Debye’s screening for power-law non-local media are characterized. We consider simple models with anomalous behavior of plasma-like media with power-law spatial dispersions. The suggested fractional differential models for these plasma-like media are discussed to describe non-local properties of power-law type. -- Highlights: •Plasma-like non-local media with power-law spatial dispersion. •Fractional differential equations for electric fields in the media. •The generalizations of Coulomb’s law and Debye’s screening for the media

  4. Fractional power-law spatial dispersion in electrodynamics

    Energy Technology Data Exchange (ETDEWEB)

    Tarasov, Vasily E., E-mail: tarasov@theory.sinp.msu.ru [Skobeltsyn Institute of Nuclear Physics, Lomonosov Moscow State University, Moscow 119991 (Russian Federation); Departamento de Análisis Matemático, Universidad de La Laguna, 38271 La Laguna, Tenerife (Spain); Trujillo, Juan J., E-mail: jtrujill@ullmat.es [Departamento de Análisis Matemático, Universidad de La Laguna, 38271 La Laguna, Tenerife (Spain)

    2013-07-15

    Electric fields in non-local media with power-law spatial dispersion are discussed. Equations involving a fractional Laplacian in the Riesz form that describe the electric fields in such non-local media are studied. The generalizations of Coulomb’s law and Debye’s screening for power-law non-local media are characterized. We consider simple models with anomalous behavior of plasma-like media with power-law spatial dispersions. The suggested fractional differential models for these plasma-like media are discussed to describe non-local properties of power-law type. -- Highlights: •Plasma-like non-local media with power-law spatial dispersion. •Fractional differential equations for electric fields in the media. •The generalizations of Coulomb’s law and Debye’s screening for the media.

  5. Databases of surface wave dispersion

    Directory of Open Access Journals (Sweden)

    L. Boschi

    2005-06-01

    Full Text Available Observations of seismic surface waves provide the most important constraint on the elastic properties of the Earth’s lithosphere and upper mantle. Two databases of fundamental mode surface wave dispersion were recently compiled and published by groups at Harvard (Ekström et al., 1997 and Utrecht/Oxford (Trampert and Woodhouse, 1995, 2001, and later employed in 3-d global tomographic studies. Although based on similar sets of seismic records, the two databases show some significant discrepancies. We derive phase velocity maps from both, and compare them to quantify the discrepancies and assess the relative quality of the data; in this endeavour, we take careful account of the effects of regularization and parametrization. At short periods, where Love waves are mostly sensitive to crustal structure and thickness, we refer our comparison to a map of the Earth’s crust derived from independent data. On the assumption that second-order effects like seismic anisotropy and scattering can be neglected, we find the measurements of Ekström et al. (1997 of better quality; those of Trampert and Woodhouse (2001 result in phase velocity maps of much higher spatial frequency and, accordingly, more difficult to explain and justify geophysically. The discrepancy is partly explained by the more conservative a priori selection of data implemented by Ekström et al. (1997. Nevertheless, it becomes more significant with decreasing period, which indicates that it could also be traced to the different measurement techniques employed by the authors.

  6. Existence of traveling waves for diffusive-dispersive conservation laws

    Directory of Open Access Journals (Sweden)

    Cezar I. Kondo

    2013-02-01

    Full Text Available In this work we show the existence existence and uniqueness of traveling waves for diffusive-dispersive conservation laws with flux function in $C^{1}(mathbb{R}$, by using phase plane analysis. Also we estimate the domain of attraction of the equilibrium point attractor corresponding to the right-hand state. The equilibrium point corresponding to the left-hand state is a saddle point. According to the phase portrait close to the saddle point, there are exactly two semi-orbits of the system. We establish that only one semi-orbit come in the domain of attraction and converges to $(u_{-},0$ as $yo -infty$. This provides the desired saddle-attractor connection.

  7. Zero Diffusion-Dispersion-Smoothing Limits for a Scalar Conservation Law with Discontinuous Flux Function

    OpenAIRE

    Holden, H.; Karlsen, K. H.; Mitrovic, D.

    2009-01-01

    We consider multidimensional conservation laws with discontinuous flux, which are regularized with vanishing diffusion and dispersion terms and with smoothing of the flux discontinuities. We use the approach of $H$ -measures to investigate the zero diffusion-dispersion-smoothing limit.

  8. Exploring scaling laws in surface topography

    International Nuclear Information System (INIS)

    Abedini, M.J.; Shaghaghian, M.R.

    2009-01-01

    Surface topography affects many soil properties and processes, particularly surface water storage and runoff. Application of fractal analysis helps understand the scaling laws inherent in surface topography at a wide range of spatial scales and climatic regimes. In this research, a high resolution digital elevation model with a 3 mm resolution on one side of the spectrum and large scale DEMs, with a 500 m spatial resolution on the other side were used to explore scaling laws in surface topography. With appropriate exploratory spatial data analysis of both types of data sets, two conventional computational procedures - variogram and Box Counting Methods (BCM) - address scaling laws in surface topography. The results respect scaling laws in surface topography to some extent as neither the plot treatment nor the direction treatment has a significant impact on fractal dimension variability. While in the variogram method, the change in slope in Richardson's plots appears to be the norm rather than the exception; Richardson's plots resulting from box counting implementation lack such mathematical behavior. These breaks in slope might have useful implications for delineating homogeneous hydrologic units and detecting change in trend in hydrologic time series. Furthermore, it is shown that fractal dimension cannot be used to capture anisotropic variabilities both within and among micro-plots. In addition, its numerical value remains insignificant at the 5% level in moving from one direction to another and also from one spatial scale to another while the ordinate intercept could discriminate the surface roughness variability from one spatial scale to another.

  9. Diffusion-dispersion limits for multidimensional scalar conservation laws with source terms

    Science.gov (United States)

    Kwon, Young-Sam

    In this paper we consider conservation laws with diffusion and dispersion terms. We study the convergence for approximation applied to conservation laws with source terms. The proof is based on the Hwang and Tzavaras's new approach [Seok Hwang, Athanasios E. Tzavaras, Kinetic decomposition of approximate solutions to conservation laws: Application to relaxation and diffusion-dispersion approximations, Comm. Partial Differential Equations 27 (5-6) (2002) 1229-1254] and the kinetic formulation developed by Lions, Perthame, and Tadmor [P.-L. Lions, B. Perthame, E. Tadmor, A kinetic formulation of multidimensional scalar conservation laws and related equations, J. Amer. Math. Soc. 7 (1) (1994) 169-191].

  10. Resonant tunneling of UCN through the moving interference filter and experimental test of the UCN dispersion law

    International Nuclear Information System (INIS)

    Frank, A.I.; Bondarenko, I.V.; Balashov, S.N.; Geltenbort, P.; Hoghoj, P.; Kozlov, A.V.; Masalovich, S.V.; Toperverg, B.P.

    2004-01-01

    With the aim to test experimentally the dispersion law validity for very slow neutrons a spectrum of ultracold neutrons (UCN) under the condition of resonance tunneling through the moving Neutron Interference Filter was investigated. The neutron spectrum in this case has a narrow width resonance, whose parameters depend on the filter characteristics and dispersion law of neutron waves in matter. For a number of samples a noticeable shift of the resonance position when the filter moved parallel to its surface was detected. This shift is in strong contradiction with the commonly accepted dispersion law. Further investigations have shown that the spectrum of tunneling neutrons is not exactly defined by the solution of one-dimensional quantum problem, but substantially affected by neutron scattering from filter imperfections. The cross section of this scattering depends on the neutron wave number and increases dramatically in resonance conditions. Experimental results as well as comprehensive theoretical analysis have led us to the unambiguous conclusion that observed phenomena of the resonance shift in a moving sample are caused by scattering of neutron tunneling states rather than by a deviation from the commonly accepted dispersion law. (author)

  11. A new guidance law for a tactical surface-to-surface missile

    Directory of Open Access Journals (Sweden)

    Danilo V. Ćuk

    2012-01-01

    Full Text Available Modern tactical surface-to-surface missiles, equipped with strapdown inertial navigation systems, achieve very good accuracy compared with free-flight rockets. The probable range dispersion mainly depends on instruments errors and longitudinal disturbances such as rocket motor total-impulse deviation as well as differences between the estimated and actual values of the axial force and head wind. This paper gives an extension of the correlated velocity concept for surface-to-surface missiles without a thrust-terminating mechanism. The calculated parameters of the correlated velocity are stored into the memory of an onboard guidance computer. On the basis of the correlated velocity concept, the modified proportional navigation with the adjustment of the time-to-go of the missile to the target was proposed. It is shown that the new guidance law can compensate for the longitudinal disturbances of different levels successfully. The effectiveness of the proposed guidance method was confirmed by means of the calculated probable range and lateral dispersion for the anticipated disturbances in the guidance system.

  12. On the dispersion law of low-frequency electron whistler waves in a multi-ion plasma

    Directory of Open Access Journals (Sweden)

    B. V. Lundin

    2008-06-01

    Full Text Available A new and simple dispersion law for extra-low-frequency electron whistler waves in a multi-ion plasma is derived. It is valid in a plasma with finite ratio ωc/ωpe of electron gyro-to-plasma frequency and is suitable for wave frequencies much less than ωpe but well above the gyrofrequencies of most heavy ions. The resultant contribution of the ions to the dispersion law is expressed by means of the lower hybrid resonance frequency, the highest ion cutoff frequency and the relative content of the lightest ion. In a frequency domain well above the ions' gyrofrequencies, this new dispersion law merges with the "modified electron whistler dispersion law" determined in previous works by the authors. It is shown that it fits well to the total cold plasma electron whistler dispersion law, for different orientations of the wave vectors and different ion constituents, including negative ions or negatively charged dust grains.

  13. Skeletonized wave equation of surface wave dispersion inversion

    KAUST Repository

    Li, Jing

    2016-09-06

    We present the theory for wave equation inversion of dispersion curves, where the misfit function is the sum of the squared differences between the wavenumbers along the predicted and observed dispersion curves. Similar to wave-equation travel-time inversion, the complicated surface-wave arrivals in traces are skeletonized as simpler data, namely the picked dispersion curves in the (kx,ω) domain. Solutions to the elastic wave equation and an iterative optimization method are then used to invert these curves for 2D or 3D velocity models. This procedure, denoted as wave equation dispersion inversion (WD), does not require the assumption of a layered model and is less prone to the cycle skipping problems of full waveform inversion (FWI). The synthetic and field data examples demonstrate that WD can accurately reconstruct the S-wave velocity distribution in laterally heterogeneous media.

  14. Laboratory Study of Dispersion of Buoyant Surface Plumes

    DEFF Research Database (Denmark)

    Petersen, Ole; Larsen, Torben

    1990-01-01

    A laboratory a study on surface dispersion of buoyant plumes in open channel turbulence in made, where the buoyancy is due to both salinity and heat. The measured parameters are the downstream derivative of a plume width and height, which are integral-characteristics of the distributions of density...

  15. Lorentz Dispersion Law from classical Hydrogen electron orbits in AC electric field via geometric algebra

    OpenAIRE

    Perez, Uzziel; Ang, Angeleene S.; Sugon Jr., Quirino M.; McNamara, Daniel J.; Yoshikawa, Akimasa

    2015-01-01

    We studied the orbit of an electron revolving around an infinitely massive nucleus of a large classical Hydrogen atom subject to an AC electric field oscillating perpendicular to the electron's circular orbit. Using perturbation theory in geometric algebra, we show that the equation of motion of the electron perpendicular to the unperturbed orbital plane satisfies a forced simple harmonic oscillator equation found in Lorentz dispersion law in Optics. We show that even though we did not introd...

  16. An energy dispersive time resolved liquid surface reflectometer

    CERN Document Server

    Garrett, R F; King, D J; Dowling, T L; Fullagar, W

    2001-01-01

    Two designs are presented for an energy dispersive liquid surface reflectometer with time resolution in the milli-second domain. The designs utilise rotating crystal and Laue analyser optics respectively to energy analyse a pink synchrotron X-ray beam after reflection from a liquid surface. Some performance estimates are presented, along with results of a test experiment using a laboratory source and solid state detector.

  17. Using Surface Integrals for Checking Archimedes' Law of Buoyancy

    Science.gov (United States)

    Lima, F. M. S.

    2012-01-01

    A mathematical derivation of the force exerted by an "inhomogeneous" (i.e. compressible) fluid on the surface of an "arbitrarily shaped" body immersed in it is not found in the literature, which may be attributed to our trust in Archimedes' law of buoyancy. However, this law, also known as Archimedes' principle (AP), does not yield the force…

  18. Optimized nonlinear inversion of surface-wave dispersion data

    International Nuclear Information System (INIS)

    Raykova, Reneta B.

    2014-01-01

    A new code for inversion of surface wave dispersion data is developed to obtain Earth’s crustal and upper mantle velocity structure. The author developed Optimized Non–Linear Inversion ( ONLI ) software, based on Monte-Carlo search. The values of S–wave velocity VS and thickness h for a number of horizontal homogeneous layers are parameterized. Velocity of P–wave VP and density ρ of relevant layers are calculated by empirical or theoretical relations. ONLI explores parameters space in two modes, selective and full search, and the main innovation of software is evaluation of tested models. Theoretical dispersion curves are calculated if tested model satisfied specific conditions only, reducing considerably the computation time. A number of tests explored impact of parameterization and proved the ability of ONLI approach to deal successfully with non–uniqueness of inversion problem. Key words: Earth’s structure, surface–wave dispersion, non–linear inversion, software

  19. Enhancement of dissolution of Telmisartan through use of solid dispersion technique surface solid dispersion

    Directory of Open Access Journals (Sweden)

    Bhumika Patel

    2012-01-01

    Full Text Available The present study was aimed to increase the solubility of the poorly water soluble drug Telmisartan by using Surface solid dispersion (SSD made of polymers like Poloxamer 407, PEG 6000 by Solvent evaporation method. The drug was solubilized by surfactants and/or polymers then adsorbed onto the surface of extremely fine carriers to increase its surface area and to form the SSD which give the more Surface area for absorption of the drug. A 2 2 full factorial design was used to investigate for each carrier the joint influence of formulation variables: Amount of carrier and adsorbent. Saturation solubility studies shows the improvement in solubility of drug batch SSD 8 give more solubility improvement than the other batch, in-vitro dissolution of pure drug, physical mixtures and SSDs were carried out in that SSDs were found to be effective in increasing the dissolution rate of Telmisartan in form of SSD when compared to pure drug. Also FT-IR spectroscopy, differential scanning calorimetry and X-ray diffractometry studies were carried out in order to characterize the drug and Surface solid dispersion. Furthermore, both DSC and X-ray diffraction showed a decrease in the melting enthalpy and reduced drug crystallinity consequently in SSDs. However, infrared spectroscopy revealed no drug interactions with the carriers.

  20. NLO dispersion laws for slow-moving quarks in HTL QCD

    Energy Technology Data Exchange (ETDEWEB)

    Abada, Abdessamad [Laboratoire de Physique des Particules et Physique Statistique, Ecole Normale Supérieure,BP 92 Vieux Kouba, 16050 Alger (Algeria); Physics Department, United Arab Emirates University,POB 17551 Al Ain (United Arab Emirates); Benchallal, Karima; Bouakaz, Karima [Laboratoire de Physique des Particules et Physique Statistique, Ecole Normale Supérieure,BP 92 Vieux Kouba, 16050 Alger (Algeria)

    2015-03-11

    We determine the next-to-leading order dispersion laws for slow-moving quarks in hard-thermal-loop perturbation of high-temperature QCD where weak coupling is assumed. Real-time formalism is used. The next-to-leading order quark self-energy is written in terms of three and four HTL-dressed vertex functions. The hard thermal loops contributing to these vertex functions are calculated ab initio and expressed using the Feynman parametrization which allows the calculation of the solid-angle integrals involved. We use a prototype of the resulting integrals to indicate how finite results are obtained in the limit of vanishing regularizer.

  1. Hydration-controlled bacterial motility and dispersal on surfaces

    DEFF Research Database (Denmark)

    Dechesne, Arnaud; Wang, G.; Gulez, Gamze

    2010-01-01

    Flagellar motility, a mode of active motion shared by many prokaryotic species, is recognized as a key mechanism enabling population dispersal and resource acquisition in microbial communities living in marine, freshwater, and other liquid-replete habitats. By contrast, its role in variably...... resume motility in response to periodic increases in hydration. We propose a biophysical model that captures key effects of hydration and liquid-film thickness on individual cell velocity and use a simple roughness network model to simulate colony expansion. Model predictions match experimental results...... the costs associated with flagella synthesis and explain the sustained presence of flagellated prokaryotes in partially saturated habitats such as soil surfaces....

  2. SURFACE-MODIFIED COALS FOR ENHANCED CATALYST DISPERSION AND LIQUEFACTION

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Yaw D. Yeboah

    1999-09-01

    This is the final report of the Department of Energy Sponsored project DE-FGF22-95PC95229 entitled, surface modified coals for enhanced catalyst dispersion and liquefaction. The aims of the study were to enhance catalyst loading and dispersion in coal for improved liquefaction by preadsorption of surfactants and catalysts on the coal and to train and educate minority scientists in catalysts and separation science. Illinois No. 6 Coal (DEC-24) was selected for the study. The surfactants investigated included dodecyl dimethyl ethyl ammonium bromide (DDAB), a cationic surfactant, sodium dodecyl sulfate, an anionic surfactant, and Triton x-100, a neutral surfactant. Ammonium molybdate tetrahydrate was used as the molybdenum catalyst precursor. Zeta potential, BET, FTIR, AFM, UV-Vis and luminescence intensity measurements were undertaken to assess the surface properties and the liquefaction activities of the coal. The parent coal had a net negative surface charge over the pH range 2-12. However, in the presence of DDAB the negativity of the surface charge decreased. At higher concentrations of DDAB, a positive surface charge resulted. In contrast to the effect of DDAB, the zeta potential of the coal became more negative than the parent coal in the presence of SDS. Adsorption of Triton reduced the net negative charge density of the coal samples. The measured surface area of the coal surface was about 30 m{sup 2}/g compared to 77m{sup 2}/g after being washed with deionized water. Addition of the surfactants decreased the surface area of the samples. Adsorption of the molybdenum catalyst increased the surface area of the coal sample. The adsorption of molybdenum on the coal was significantly promoted by preadsorption of DDAB and SDS. Molybdenum adsorption showed that, over a wide range of concentrations and pH values, the DDAB treated coal adsorbed a higher amount of molybdenum than the samples treated with SDS. The infrared spectroscopy (FTIR) and the atomic force

  3. On the dispersion law of low-frequency electron whistler waves in a multi-ion plasma

    Directory of Open Access Journals (Sweden)

    B. V. Lundin

    2008-06-01

    Full Text Available A new and simple dispersion law for extra-low-frequency electron whistler waves in a multi-ion plasma is derived. It is valid in a plasma with finite ratio ωcpe of electron gyro-to-plasma frequency and is suitable for wave frequencies much less than ωpe but well above the gyrofrequencies of most heavy ions. The resultant contribution of the ions to the dispersion law is expressed by means of the lower hybrid resonance frequency, the highest ion cutoff frequency and the relative content of the lightest ion. In a frequency domain well above the ions' gyrofrequencies, this new dispersion law merges with the "modified electron whistler dispersion law" determined in previous works by the authors. It is shown that it fits well to the total cold plasma electron whistler dispersion law, for different orientations of the wave vectors and different ion constituents, including negative ions or negatively charged dust grains.

  4. Symmetry Reduction, Exact Solutions, and Conservation Laws of the (2+1)-Dimensional Dispersive Long Wave Equations

    Science.gov (United States)

    Dong, Zhong Zhou; Chen, Yong

    2009-10-01

    By means of the generalized direct method, we investigate the (2+1)-dimensional dispersive long wave equations. A relationship is constructed between the new solutions and the old ones and we obtain the full symmetry group of the (2+1)-dimensional dispersive long wave equations, which includes the Lie point symmetry group S and the discrete groups D. Some new forms of solutions are obtained by selecting the form of the arbitrary functions, based on their relationship. We also find an infinite number of conservation laws of the (2+1)-dimensional dispersive long wave equations.

  5. An anomalous extinction law in the Cep OB3b young cluster: Evidence for dust processing during gas dispersal

    International Nuclear Information System (INIS)

    Allen, Thomas S.; Prchlik, Jakub J.; Megeath, S. Thomas; Gutermuth, Robert A.; Pipher, Judith L.; Naylor, Tim; Jeffries, R. D.

    2014-01-01

    We determine the extinction law through Cep OB3b, a young cluster of 3000 stars undergoing gas dispersal. The extinction is measured toward 76 background K giants identified with MMT/Hectospec spectra. Color excess ratios were determined toward each of the giants using V and R photometry from the literature, g, r, i, and z photometry from the Sloan Digital Sky Survey and J, H, and K s photometry from the Two Micron All Sky Survey. These color excess ratios were then used to construct the extinction law through the dusty material associated with Cep OB3b. The extinction law through Cep OB3b is intermediate between the R V = 3.1 and R V = 5 laws commonly used for the diffuse atomic interstellar medium and dense molecular clouds, respectively. The dependence of the extinction law on line-of-sight A V is investigated and we find the extinction law becomes shallower for regions with A V > 2.5 mag. We speculate that the intermediate dust law results from dust processing during the dispersal of the molecular cloud by the cluster.

  6. An anomalous extinction law in the Cep OB3b young cluster: Evidence for dust processing during gas dispersal

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Thomas S.; Prchlik, Jakub J.; Megeath, S. Thomas [University of Toledo, Ritter Astrophysical Observatory, Department of Physics and Astronomy, Toledo, OH 43606 (United States); Gutermuth, Robert A. [Five College Astronomy Department, Smith College, Northampton, MA 01063 (United States); Pipher, Judith L. [Department of Physics and Astronomy, University of Rochester, Rochester, NY 14627 (United States); Naylor, Tim [School of Physics, University of Exeter, Exeter, UK EX4 4QL (United Kingdom); Jeffries, R. D. [Astrophysics Group, School of Physical and Geographical Sciences, Keele University, Keele, Staffordshire, UK ST5 5BG (United Kingdom)

    2014-05-10

    We determine the extinction law through Cep OB3b, a young cluster of 3000 stars undergoing gas dispersal. The extinction is measured toward 76 background K giants identified with MMT/Hectospec spectra. Color excess ratios were determined toward each of the giants using V and R photometry from the literature, g, r, i, and z photometry from the Sloan Digital Sky Survey and J, H, and K{sub s} photometry from the Two Micron All Sky Survey. These color excess ratios were then used to construct the extinction law through the dusty material associated with Cep OB3b. The extinction law through Cep OB3b is intermediate between the R{sub V} = 3.1 and R{sub V} = 5 laws commonly used for the diffuse atomic interstellar medium and dense molecular clouds, respectively. The dependence of the extinction law on line-of-sight A{sub V} is investigated and we find the extinction law becomes shallower for regions with A{sub V} > 2.5 mag. We speculate that the intermediate dust law results from dust processing during the dispersal of the molecular cloud by the cluster.

  7. Energetics of oscillating lifting surfaces using integral conservation laws

    Science.gov (United States)

    Ahmadi, Ali R.; Widnall, Sheila E.

    1987-01-01

    The energetics of oscillating flexible lifting surfaces in two and three dimensions is calculated by the use of integral conservation laws in inviscid incompressible flow for general and harmonic transverse oscillations. Total thrust is calculated from the momentum theorem and energy loss rate due to vortex shedding in the wake from the principle of conservation of mechanical energy. Total power required to maintain the oscillations and hydrodynamic efficiency are also determined. In two dimensions, the results are obtained in closed form. In three dimensions, the distribution of vorticity on the lifting surface is also required as input to the calculations. Thus, unsteady lifting-surface theory must be used as well. The analysis is applicable to oscillating lifting surfaces of arbitrary planform, aspect ratio, and reduced frequency and does not require calculation of the leading-edge thrust.

  8. Surface spin-glass in cobalt ferrite nanoparticles dispersed in silica matrix

    Energy Technology Data Exchange (ETDEWEB)

    Zeb, F.; Sarwer, W. [Materials Research Laboratory, Department of Physics, International Islamic University, Islamabad (Pakistan); Nadeem, K., E-mail: kashif.nadeem@iiu.edu.pk [Materials Research Laboratory, Department of Physics, International Islamic University, Islamabad (Pakistan); Kamran, M.; Mumtaz, M. [Materials Research Laboratory, Department of Physics, International Islamic University, Islamabad (Pakistan); Krenn, H. [Institute of Physics, Karl-Franzens University Graz, Universitätsplatz 5, A-8010 Graz (Austria); Letofsky-Papst, I. [Institute for Electron Microscopy, University of Technology Graz, Steyrergasse 17, A-8010 Graz (Austria)

    2016-06-01

    Surface effects in cobalt ferrite (CoFe{sub 2}O{sub 4}) nanoparticles dispersed in a silica (SiO{sub 2}) matrix were studied by using AC and DC magnetization. Nanoparticles with different concentration of SiO{sub 2} were synthesized by using sol–gel method. Average crystallite size lies in the range 25–34 nm for different SiO{sub 2} concentration. TEM image showed that particles are spherical and elongated in shape. Nanoparticles with higher concentration of SiO{sub 2} exhibit two peaks in the out-of-phase ac-susceptibility. First peak lies in the high temperature regime and corresponds to average blocking temperature of the nanoparticles. Second peak lies in the low temperature regime and is attributed to surface spin-glass freezing in these nanoparticles. Low temperature peak showed SiO{sub 2} concentration dependence and was vanished for large uncoated nanoparticles. The frequency dependence of the AC-susceptibility of low temperature peak was fitted with dynamic scaling law which ensures the presence of spin-glass behavior. With increasing applied DC field, the low temperature peak showed less shift as compared to blocking peak, broaden, and decreased in magnitude which also signifies its identity as spin-glass peak for smaller nanoparticles. M–H loops showed the presence of more surface disorder in nanoparticles dispersed in 60% SiO{sub 2} matrix. All these measurements revealed that surface effects become strengthen with increasing SiO{sub 2} matrix concentration and surface spins freeze in to spin-glass state at low temperatures. - Highlights: • Surface effects in CoFe{sub 2}O{sub 4} nanoparticles dispersed in a SiO{sub 2} matrix were studied. • Out-of-phase AC-susceptibility exhibits two peaks for SiO{sub 2} coated nanoparticles. • First peak corresponds to average blocking temperature. • Second peak is attributed to surface spin-glass freezing • The spin-glass behavior depends upon the SiO{sub 2} matrix concentration.

  9. Response surface analysis to improve dispersed crude oil biodegradation

    Energy Technology Data Exchange (ETDEWEB)

    Zahed, Mohammad A.; Aziz, Hamidi A.; Mohajeri, Leila [School of Civil Engineering, Universiti Sains Malaysia, Nibong Tebal, Penang (Malaysia); Isa, Mohamed H. [Civil Engineering Department, Universiti Teknologi PETRONAS, Tronoh, Perak (Malaysia)

    2012-03-15

    In this research, the bioremediation of dispersed crude oil, based on the amount of nitrogen and phosphorus supplementation in the closed system, was optimized by the application of response surface methodology and central composite design. Correlation analysis of the mathematical-regression model demonstrated that a quadratic polynomial model could be used to optimize the hydrocarbon bioremediation (R{sup 2} = 0.9256). Statistical significance was checked by analysis of variance and residual analysis. Natural attenuation was removed by 22.1% of crude oil in 28 days. The highest removal on un-optimized condition of 68.1% were observed by using nitrogen of 20.00 mg/L and phosphorus of 2.00 mg/L in 28 days while optimization process exhibited a crude oil removal of 69.5% via nitrogen of 16.05 mg/L and phosphorus 1.34 mg/L in 27 days therefore optimization can improve biodegradation in shorter time with less nutrient consumption. (Copyright copyright 2012 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  10. Focus expansion and stability of the spread parameter estimate of the power law model for dispersal gradients.

    Science.gov (United States)

    Ojiambo, Peter S; Gent, David H; Mehra, Lucky K; Christie, David; Magarey, Roger

    2017-01-01

    Empirical and mechanistic modeling indicate that pathogens transmitted via aerially dispersed inoculum follow a power law, resulting in dispersive epidemic waves. The spread parameter ( b ) of the power law model, which is an indicator of the distance of the epidemic wave front from an initial focus per unit time, has been found to be approximately 2 for several animal and plant diseases over a wide range of spatial scales under conditions favorable for disease spread. Although disease spread and epidemic expansion can be influenced by several factors, the stability of the parameter b over multiple epidemic years has not been determined. Additionally, the size of the initial epidemic area is expected to be strongly related to the final epidemic extent for epidemics, but the stability of this relationship is also not well established. Here, empirical data of cucurbit downy mildew epidemics collected from 2008 to 2014 were analyzed using a spatio-temporal model of disease spread that incorporates logistic growth in time with a power law function for dispersal. Final epidemic extent ranged from 4.16 ×10 8 km 2 in 2012 to 6.44 ×10 8 km 2 in 2009. Current epidemic extent became significantly associated ( P  power law model. These results suggest that the spread parameter b may not be stable over multiple epidemic years. However, b  ≈ 2 may be considered the lower limit of the distance traveled by epidemic wave-fronts for aerially transmitted pathogens that follow a power law dispersal function.

  11. Rate law analysis of water oxidation on a hematite surface.

    Science.gov (United States)

    Le Formal, Florian; Pastor, Ernest; Tilley, S David; Mesa, Camilo A; Pendlebury, Stephanie R; Grätzel, Michael; Durrant, James R

    2015-05-27

    Water oxidation is a key chemical reaction, central to both biological photosynthesis and artificial solar fuel synthesis strategies. Despite recent progress on the structure of the natural catalytic site, and on inorganic catalyst function, determining the mechanistic details of this multiredox reaction remains a significant challenge. We report herein a rate law analysis of the order of water oxidation as a function of surface hole density on a hematite photoanode employing photoinduced absorption spectroscopy. Our study reveals a transition from a slow, first order reaction at low accumulated hole density to a faster, third order mechanism once the surface hole density is sufficient to enable the oxidation of nearest neighbor metal atoms. This study thus provides direct evidence for the multihole catalysis of water oxidation by hematite, and demonstrates the hole accumulation level required to achieve this, leading to key insights both for reaction mechanism and strategies to enhance function.

  12. Investigating the conformation of polymeric dispersant molecules on nanoparticle surface

    International Nuclear Information System (INIS)

    Yasin, S.; Luckham, P.F.; Iqbal, T

    2016-01-01

    Block copolymers are widely used as stabilizers in industrial dispersions. These polymers adsorb on surfaces by an anchor chain and extend by a hydrophilic chain. Scaling model or de Gennes theory has been used to determine the grafting density of the block copolymers. By implementing this theory to the block copolymers, conformation of the polymer molecules as a function of distance between adjacent anchor chains can be determined. The scaling model was applied to a selection of block copolymers (PE/F 103, PE/F 108, NPE1800, Triton X100, Triton X405, Lugalvan BNO12, Hypermer LP1, Hypermer B246 and OLOA 11000) in this study. The cross sectional area sc, distance s (square root of sc) and the Flory radius (end to end dimension of polymer), Rf, for all the polymers was determined. The cross sectional area per PEO (Poly Ethylene Oxide) chain (nm2) was found to be increasing with the size of stabilizing chain. Triton X100 and Lugalvan BNO12 has the smaller stabilizing chains so occupy smaller cross sectional areas whereas PE/F108 and triton X405 have larger number of PEO units and occupy a larger cross sectional area. This shows that stabilizing chain regulates the adsorption amounts that are lower in case of lower number of EO units. The application of de Gennes theory to experimental results suggested brush configuration of adsorbed polymer molecules in case of PE/F 103, PE/F 108, Triton X100, Triton X405, NPE1800, Lugalvan BNO12, Hypermer B246 and OLOA 11000. Whereas, Hypermer LP1 is more likely found to be adsorbed on graphitic carbon black in loops and trains. (author)

  13. Dispersion analysis of passive surface-wave noise generated during hydraulic-fracturing operations

    Science.gov (United States)

    Forghani-Arani, Farnoush; Willis, Mark; Snieder, Roel; Haines, Seth S.; Behura, Jyoti; Batzle, Mike; Davidson, Michael

    2014-01-01

    Surface-wave dispersion analysis is useful for estimating near-surface shear-wave velocity models, designing receiver arrays, and suppressing surface waves. Here, we analyze whether passive seismic noise generated during hydraulic-fracturing operations can be used to extract surface-wave dispersion characteristics. Applying seismic interferometry to noise measurements, we extract surface waves by cross-correlating several minutes of passive records; this approach is distinct from previous studies that used hours or days of passive records for cross-correlation. For comparison, we also perform dispersion analysis for an active-source array that has some receivers in common with the passive array. The active and passive data show good agreement in the dispersive character of the fundamental-mode surface-waves. For the higher mode surface waves, however, active and passive data resolve the dispersive properties at different frequency ranges. To demonstrate an application of dispersion analysis, we invert the observed surface-wave dispersion characteristics to determine the near-surface, one-dimensional shear-wave velocity.

  14. Effect of surface energy on dispersion and mechanical properties of polymer/nanocrystalline cellulose nanocomposites.

    Science.gov (United States)

    Khoshkava, V; Kamal, M R

    2013-09-09

    Dispersion quality and polymer-filler interaction are important factors in determining the final properties of polymer nanocomposites. Surface energy of nanocrystalline cellulose (NCC) and some polymers (polypropylene, PP, and polylactic acid, PLA) was measured at room and high temperatures. NCC had higher polarity and surface energy than PP and PLA at room temperature but had a lower surface energy at higher temperatures. The effect of surface modification with alkenyl succinic anhydride (ASA) on NCC surface energy at room and high temperature was studied. Total surface energy of NCC was lowered after surface modification. Thermodynamic work of adhesion for PP/NCC and PLA/NCC was lowered by NCC surface modification. A thermodynamic analysis is proposed to estimate the dispersion energy, based on surface energy measurements at room and high temperatures. Also, a dispersion factor is defined to provide a quantitative indication of the dispersibility of nanoparticles in a polymer matrix under various conditions. The required dispersion energy was reduced by lowering the interfacial tension. On the other hand, it increased as the quality of NCC dispersion (i.e., the nanoparticle surface area) in the system was improved. Surface modification of NCC with ASA had a negative effect on the compatibility between NCC and PLA, whereas it had a positive influence on compatibility between PP and NCC.

  15. Surface modification and characterization for dispersion stability of inorganic nanometer-scaled particles in liquid media

    International Nuclear Information System (INIS)

    Kamiya, Hidehiro; Iijima, Motoyuki

    2010-01-01

    Inorganic nanoparticles are indispensable for science and technology as materials, pigments and cosmetics products. Improving the dispersion stability of nanoparticles in various liquids is essential for those applications. In this review, we discuss why it is difficult to control the stability of nanoparticles in liquids. We also overview the role of surface interaction between nanoparticles in their dispersion and characterization, e.g. by colloid probe atomic force microscopy (CP-AFM). Two types of surface modification concepts, post-synthesis and in situ modification, were investigated in many previous studies. Here, we focus on post-synthesis modification using adsorption of various kinds of polymer dispersants and surfactants on the particle surface, as well as surface chemical reactions of silane coupling agents. We discuss CP-AFM as a technique to analyze the surface interaction between nanoparticles and the effect of surface modification on the nanoparticle dispersion in liquids. (topical review)

  16. Surface modification and characterization for dispersion stability of inorganic nanometer-scaled particles in liquid media

    Directory of Open Access Journals (Sweden)

    Hidehiro Kamiya and Motoyuki Iijima

    2010-01-01

    Full Text Available Inorganic nanoparticles are indispensable for science and technology as materials, pigments and cosmetics products. Improving the dispersion stability of nanoparticles in various liquids is essential for those applications. In this review, we discuss why it is difficult to control the stability of nanoparticles in liquids. We also overview the role of surface interaction between nanoparticles in their dispersion and characterization, e.g. by colloid probe atomic force microscopy (CP-AFM. Two types of surface modification concepts, post-synthesis and in situ modification, were investigated in many previous studies. Here, we focus on post-synthesis modification using adsorption of various kinds of polymer dispersants and surfactants on the particle surface, as well as surface chemical reactions of silane coupling agents. We discuss CP-AFM as a technique to analyze the surface interaction between nanoparticles and the effect of surface modification on the nanoparticle dispersion in liquids.

  17. Scaling laws and edge effects for polymer surface discharges

    Science.gov (United States)

    Balmain, K. G.

    1979-01-01

    Specimens of Mylar sheet were exposed to a 20 kV electron beam. The resulting surface discharge arcs were photographed and the discharge current into a metal backing plate measured as a function of time. The area of the Mylar sheet was defined by a round aperture in a close-fitting metal mask, and the current pulse characteristics were plotted against area on log-log paper. The plots appear as straight lines (due to power-law behavior) with slopes of 0.50 for the peak current, 1.00 for the charge released, 1.49 for the energy and 0.55 for the pulse duration. Evidence is presented for the occurrence of banded charge distributions near grounded edges, on both Teflon and Mylar.

  18. Surface decoration and dispersibility of carbon nanofibers in aqueous surfactant solution

    Science.gov (United States)

    Wang, B. M.; Zhang, Y.; Liu, S.

    2014-03-01

    As a novel functional nanomaterial, the dispersion effect of carbon nanofibers (CNFs) has a significant influence on the application of CNFs in the composites. Two effective surfactants, methylcellulose (MC) and polycarboxylate superplasticizer, were used to analyze the dispersion of CNFs in aqueous solution. A method utilizing ultrasonic processing was employed to achieve a homogenous CNF suspension, and the dispersion effect was further characterized by the method of measuring ultraviolet absorbency (UV absorbency), zeta potential, surface tension and transmission electron microscopy (TEM) micrographs. The results show that the zeta potential and surface tension reach the saturation plateau at MC concentration and polycarboxylate superplasticizer concentration of about 0.4 and 0.8 g/L, respectively, which reflects that the optimum concentration ratio of MC to CNFs is 2: 1, and the optimum dispersing polycarboxylate superplasticizer to CNFs ratio of 4: 1 is required to achieve dispersions with maximum achievable dispersion of CNFs.

  19. Surface composition and contact angle relationships for differently prepared solid dispersions.

    Science.gov (United States)

    Dahlberg, Carina; Millqvist-Fureby, Anna; Schuleit, Michael

    2008-10-01

    Solid dispersions are promising drug delivery forms which offer the possibility to disperse a hydrophobic drug in a hydrophilic matrix and thereby improve the dissolution behavior and the bioavailability of the drug. One important aspect and a prerequisite in understanding the drug dissolution mechanism from solid dispersions is a better analytical monitoring of the solid dispersion surface properties, such as powder surface composition and water adsorption properties. In this paper, we have considered chemical and structural surface analysis data for solid dispersions processed by spray drying or roto-evaporation and compared these data with information obtained by contact angle measurements. Firstly, we establish the usefulness and suitability of X-ray photoelectron spectroscopy (XPS) for determination of surface chemical composition and scanning electron microscopy (SEM) for determining the structure of solid dispersions composed of different types of carriers, drugs and drug concentrations. Secondly, we measure contact angles of solid dispersions to describe wettability, to finally establish a link between the surface chemical composition, the powder structure and the wetting behavior. These experimental methods offer a rapid screening tool for the selection of carrier, drug concentration and/or process in early development. In addition, they provide a useful tool for investigating structural aspects of solid dispersions which have intrinsic relevance for drug dissolution and stability.

  20. Long wave dispersion relations for surface waves in a magnetically structured atmosphere

    International Nuclear Information System (INIS)

    Rae, I.C.; Roberts, B.

    1983-01-01

    A means of obtaining approximate dispersion relations for long wavelength magnetoacoustic surface waves propagating in a magnetically structured atmosphere is presented. A general dispersion relation applying to a wide range of magnetic profiles is obtained, and illustrated for the special cases of a single interface and a magnetic slab. In the slab geometry, for example, the dispersion relation contains both the even (sausage) and odd (kink) modes in one formalism

  1. The complex dispersion relation of surface plasmon polaritons at gold/para-hexaphenylene interfaces

    DEFF Research Database (Denmark)

    Lemke, Christoph; Leißner, Till; Klick, Alwin

    2014-01-01

    Two-photon photoemission electron microscopy (2P-PEEM) is used to measure the real and imaginary part of the dispersion relation of surface plasmon polaritons at different interface systems. A comparison of calculated and measured dispersion data for a gold/vacuum interface demonstrates...

  2. Focus expansion and stability of the spread parameter estimate of the power law model for dispersal gradients

    Directory of Open Access Journals (Sweden)

    Peter S. Ojiambo

    2017-06-01

    Full Text Available Empirical and mechanistic modeling indicate that pathogens transmitted via aerially dispersed inoculum follow a power law, resulting in dispersive epidemic waves. The spread parameter (b of the power law model, which is an indicator of the distance of the epidemic wave front from an initial focus per unit time, has been found to be approximately 2 for several animal and plant diseases over a wide range of spatial scales under conditions favorable for disease spread. Although disease spread and epidemic expansion can be influenced by several factors, the stability of the parameter b over multiple epidemic years has not been determined. Additionally, the size of the initial epidemic area is expected to be strongly related to the final epidemic extent for epidemics, but the stability of this relationship is also not well established. Here, empirical data of cucurbit downy mildew epidemics collected from 2008 to 2014 were analyzed using a spatio-temporal model of disease spread that incorporates logistic growth in time with a power law function for dispersal. Final epidemic extent ranged from 4.16 ×108 km2 in 2012 to 6.44 ×108 km2 in 2009. Current epidemic extent became significantly associated (P < 0.0332; 0.56 < R2 < 0.99 with final epidemic area beginning near the end of April, with the association increasing monotonically to 1.0 by the end of the epidemic season in July. The position of the epidemic wave-front became exponentially more distant with time, and epidemic velocity increased linearly with distance. Slopes from the temporal and spatial regression models varied with about a 2.5-fold range across epidemic years. Estimates of b varied substantially ranging from 1.51 to 4.16 across epidemic years. We observed a significant b ×time (or distance interaction (P < 0.05 for epidemic years where data were well described by the power law model. These results suggest that the spread parameter b may not be stable over multiple epidemic

  3. Dissecting the structure of surface stabilizer on the dispersion of inorganic nanoparticles in aqueous medium

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Yong; Yu, Zongzhi; Zheng, Junping, E-mail: jpzheng@tju.edu.cn [Tianjin University, Tianjin Key Laboratory of Composite and Functional Materials, School of Materials Science and Engineering (China)

    2017-03-15

    Dispersing inorganic nanoparticles in aqueous solutions is a key requirement for a great variety of products and processes, including carriers in drug delivery or fillers in polymers. To be highly functional in the final product, inorganic particles are required to be finely dispersed in nanoscale. In this study, silica was selected as a representative inorganic particle. Surface stabilizers with different chain length and charged group were designed to reveal the influence of electrostatic and van der Waals forces between silica and stabilizer on the dispersion of silica particles in aqueous medium. Results showed surface stabilizer with longer alkyl chain and charged group exerted best ability to deaggregate silica, leading to a hydrodynamic size of 51.1 nm. Surface stabilizer designing with rational structure is a promising solution for deagglomerating and reducing process time and energy. Giving the designability and adaptability of surface stabilizer, this method is of potential for dispersion of other inorganic nanoparticles.

  4. Surface-plasmon dispersion relation for the inhomogeneous charge-density medium

    International Nuclear Information System (INIS)

    Harsh, O.K.; Agarwal, B.K.

    1989-01-01

    The surface-plasmon dispersion relation is derived for the plane-bounded electron gas when there is an inhomogeneous charge-density distribution in the plasma. The hydrodynamical model is used. Both cphi and dcphi/dx are taken to be continuous at the surface of the slab, where cphi is the scalar potential. The dispersion relation is compared with the theoretical works of Stern and Ferrell and of Harsh and Agarwal. It is also compared with the observations of Kunz. A dispersion relation for the volume-plasmon oscillations is derived which resembles the well-known relation of Bohm and Pines

  5. [Response surface method optimize of nano-silica solid dispersion technology assistant enzymatic hydrolysis preparation genistein].

    Science.gov (United States)

    Jin, Xin; Zhang, Zhen-Hai; Zhu, Jing; Sun, E; Yu, Dan-Hong; Chen, Xiao-Yun; Liu, Qi-Yuan; Ning, Qing; Jia, Xiao-Bin

    2012-04-01

    This article reports that nano-silica solid dispersion technology was used to raise genistein efficiency through increasing the enzymatic hydrolysis rate. Firstly, genistin-nano-silica solid dispersion was prepared by solvent method. And differential scanning calorimetry (DSC) and transmission electron microscopy (TEM) were used to verify the formation of solid dispersion, then enzymatic hydrolysis of solid dispersion was done by snailase to get genistein. With the conversion of genistein as criteria, single factor experiments were used to study the different factors affecting enzymatic hydrolysis of genistin and its solid dispersion. And then, response surface method was used to optimize of nano-silica solid dispersion technology assistant enzymatic hydrolysis. The optimum condition to get genistein through enzymatic hydrolysis of genistin-nano-silica solid dispersion was pH 7.1, temperature 52.2 degrees C, enzyme concentration 5.0 mg x mL(-1) and reaction time 7 h. Under this condition, the conversion of genistein was (93.47 +/- 2.40)%. Comparing with that without forming the genistin-nano-silica solid dispersion, the conversion increased 2.62 fold. At the same time, the product of hydrolysis was purified to get pure genistein. The method of enzymatic hydrolysis of genistin-nano-silica solid dispersion by snailase to obtain genistein is simple, efficiency and suitable for the modern scale production.

  6. Dispersive surface waves along partially saturated porous media

    NARCIS (Netherlands)

    Chao, G.; Smeulders, D.M.J.; Van Dongen, M.E.H.

    2006-01-01

    Numerical results for the velocity and attenuation of surface wave modes in fully permeable liquid/partially saturated porous solid plane interfaces are reported in a broadband of frequencies (100?Hz–1?MHz). A modified Biot theory of poromechanics is implemented which takes into account the

  7. Wave-equation dispersion inversion of surface waves recorded on irregular topography

    KAUST Repository

    Li, Jing

    2017-08-17

    Significant topographic variations will strongly influence the amplitudes and phases of propagating surface waves. Such effects should be taken into account, otherwise the S-velocity model inverted from the Rayleigh dispersion curves will contain significant inaccuracies. We now show that the recently developed wave-equation dispersion inversion (WD) method naturally takes into account the effects of topography to give accurate S-velocity tomograms. Application of topographic WD to demonstrates that WD can accurately invert dispersion curves from seismic data recorded over variable topography. We also apply this method to field data recorded on the crest of mountainous terrain and find with higher resolution than the standard WD tomogram.

  8. Dispersion states and surface characteristics of physically blended polyhedral oligomeric silsesquioxane/polymer hybrid nanocomposites

    Science.gov (United States)

    Misra, Rahul

    Control of dispersion and segregation states of nanostructured additives is one of the biggest challenges in realizing the optimum potential of high performance hybrid polymer nanocomposites. Polyhedral oligomeric silsesquioxane (POSS) nanostructured chemicals, with their hybrid organic-inorganic nature and flexible functionalization with a variety of organic substituents, yield possibilities to control dispersion and tune compatibility in a wide range of polymer systems. The overall goal of this research is to investigate the fundamental parameters that influence the dispersion and segregation states of POSS nanostructured chemicals, and to understand chain dynamics and conformations in physically blended POSS hybrid polymer nanocomposites (HPNC's). Multiple structural and mechanical factors influencing macro to nano scale surface and bulk properties were successfully investigated and correlated. A strategy based on thermodynamic principles for selective control of POSS dispersion states in a given polymer matrix is developed and discussed. This dissertation consists of eight chapters. Chapter 1 provides a detailed introduction about the development and current research interest in POSS/polymer nanocomposites. This chapter also discusses limitations of current advanced nanoprobe techniques. Chapter 2 establishes the overall goal of this research and specific research ii objectives. Chapter 3 establishes the preferential surface migration behavior of physically dispersed, non-reactive, closed cage octaisobutyl POSS (Oib-POSS) in a non-polar polypropylene matrix. Furthermore, influence of POSS surface segregation on the surface properties, especially nano-tribomechanical behavior is also discussed. Chapter 4 expands the studies by melt blending two different types of POSS molecules, a non-reactive, closed cage Oib-POSS and an open cage trisilanolphenyl POSS (Tsp-POSS), in a nylon 6 matrix. This chapter discusses the morphology, nano-dispersion and macro- to

  9. Coating and dispersion of ceramic nanoparticles by UV-ozone etching assisted surface-initiated living radical polymerization.

    Science.gov (United States)

    Arita, Toshihiko

    2010-10-01

    Commercially available unmodified ceramic nanoparticles (NPs) in dry powder state were surface-modified and dispersed in almost single-crystal size. The surface-initiated living radical polymerization after just UV-ozone soft etching enables one to graft polymers onto the surface of ceramic NPs and disperse them in solvents. Furthermore, a number of NPs were dispersed with single-crystal sizes. The technique developed here could be applied to almost all ceramic NPs including metal nitrides.

  10. Stability of nano-metric colloidal dispersions of titanium: effect of surface complexation

    International Nuclear Information System (INIS)

    Peyre, Veronique

    1996-01-01

    This research thesis reports the study of the adsorption of small organic molecules at the surface of nano-particles of mineral oxides (zirconia), and of its effects on the stability of the colloidal dispersion. Adsorption has been quantified by adsorption isotherms and surface titrations. Processes and mechanisms are thus discussed with respect to pH. The influence of various protecting molecules (acetyl acetone, but also acetic acid, citric acid and diethanolamine) has been studied, and notably highlighted the role of the outer face of the complexing agent in the assessment of reactions between particles which govern the compression and re-dispersability properties of protected dispersions. This study is performed by osmotic pressure measurements and by X-ray diffusion at small angles, completed by statistical mechanics calculations [fr

  11. Characterization of size, surface charge, and agglomeration state of nanoparticle dispersions for toxicological studies

    International Nuclear Information System (INIS)

    Jiang Jingkun; Oberdoerster, Guenter; Biswas, Pratim

    2009-01-01

    Characterizing the state of nanoparticles (such as size, surface charge, and degree of agglomeration) in aqueous suspensions and understanding the parameters that affect this state are imperative for toxicity investigations. In this study, the role of important factors such as solution ionic strength, pH, and particle surface chemistry that control nanoparticle dispersion was examined. The size and zeta potential of four TiO 2 and three quantum dot samples dispersed in different solutions (including one physiological medium) were characterized. For 15 nm TiO 2 dispersions, the increase of ionic strength from 0.001 M to 0.1 M led to a 50-fold increase in the hydrodynamic diameter, and the variation of pH resulted in significant change of particle surface charge and the hydrodynamic size. It was shown that both adsorbing multiply charged ions (e.g., pyrophosphate ions) onto the TiO 2 nanoparticle surface and coating quantum dot nanocrystals with polymers (e.g., polyethylene glycol) suppressed agglomeration and stabilized the dispersions. DLVO theory was used to qualitatively understand nanoparticle dispersion stability. A methodology using different ultrasonication techniques (bath and probe) was developed to distinguish agglomerates from aggregates (strong bonds), and to estimate the extent of particle agglomeration. Probe ultrasonication performed better than bath ultrasonication in dispersing TiO 2 agglomerates when the stabilizing agent sodium pyrophosphate was used. Commercially available Degussa P25 and in-house synthesized TiO 2 nanoparticles were used to demonstrate identification of aggregated and agglomerated samples.

  12. Re-dispersion of alumina particles in water: influence of the surface state

    International Nuclear Information System (INIS)

    Desset, Sabine

    1999-01-01

    The aim of this work was to determine the mechanisms by which suspensions of alpha alumina particles may be dried and then re-dispersed spontaneously in water. To get reproducible results, we designed appropriate protocols: (i) for preparing the surface state, and for generating controlled interparticle contacts (presence of water or complexing agents); (ii) for measuring the amount of re-dispersed material with a proper averaging over all interparticle bonds (turbidity). These results show that there are thresholds, determined by the conditions of drying and re-dispersion, where all the powder goes from the aggregated state to the dispersed state. With hydrated powders, it was found that mild changes in the chemical conditions (pH) and application of very weak mechanical forces (sedimentation) were enough to cause significant change in re-dispersion. According to these thresholds, a re-dispersion mechanism could be identified. Re-dispersion is ruled, indeed, by a balance of forces and the displacement of the re-dispersion thresholds indicates a shift in the balance of forces. These forces are the well-known forces that control colloidal stability: van der Waals attraction, electrostatic repulsion and hydration forces. We found that hydration acts as a repulsive wall corresponding to one or two monolayers of water on each surface and depends on the Relative Humidity of drying. We also found that electrostatic repulsions at short separations are much weaker than the predictions based on the Poisson Boltzmann equation, but should be modelled according to the triple layer model. Repulsions to be considered are those calculated with the screened charges of the particles. Another aim of this work was to facilitate re-dispersion by using complexing agents that bind to the surfaces and add a steric repulsion We have found that molecules with carboxylic and hydroxyl groups can be efficient in this respect, if they are bound to surfaces before aggregation, if they are not

  13. Re-dispersion of alumina particles in water: influence of the surface state

    International Nuclear Information System (INIS)

    Desset, Sabine

    1999-01-01

    The aim of this work was to determine the mechanisms by which suspensions of alpha alumina particles may be dried and then re-dispersed spontaneously in water. To get reproducible results, we designed appropriate protocols: (i) for preparing the surface state, and for generating controlled interparticle contacts (presence of water or complexing agents); (ii) for measuring the amount of re-dispersed material with a proper averaging over all interparticle bonds (turbidity). These results show that there are thresholds, determined by the conditions of drying and re-dispersion, where all the powder goes from the aggregated state to the dispersed state. With hydrated powders, it was found that mild changes in the chemical conditions (pH) and application of very weak mechanical forces (sedimentation) were enough to cause significant change in re-dispersion. According to these thresholds, a re-dispersion mechanism could be identified. Re-dispersion is ruled, indeed, by a balance of forces and the displacement of the re-dispersion thresholds indicates a shift in the balance of forces. These forces are the well known forces that control colloidal stability: van der Waals attraction, electrostatic repulsion and hydration forces. We found that hydration acts as a repulsive wall corresponding to one or two monolayers of water on each surface and depends on the Relative Humidity of drying. We also found that electrostatic repulsions at short separations are much weaker than the predictions based on the Poisson Boltzmann equation, but should be modelled according to the triple layer model. Repulsions to be considered are those calculated with the screened charges of the particles. Another aim of this work was to facilitate re-dispersion by using complexing agents that bind to the surfaces and add a steric repulsion We have found that molecules with carboxylic and hydroxyl groups can be efficient in this respect, if they are bound to surfaces before aggregation, if they are not

  14. Dispersing surface-modified imogolite nanotubes in polar and non-polar solvents

    Science.gov (United States)

    Li, Ming; Brant, Jonathan A.

    2018-02-01

    Furthering the development of nanocomposite structures, namely membranes for water treatment applications, requires that methods be developed to ensure nanoparticle dispersion in polar and non-polar solvents, as both are widely used in associated synthesis techniques. Here, we report on a two-step method to graft polyvinylpyrrolidone (PVP), and a one-step method for octadecylphosphonic acid (OPA), onto the outer surfaces of imogolite nanotubes. The goal of these approaches was to improve and maintain nanotube dispersion in polymer compatible polar and non-polar solvents. The PVP coating modified the imogolite surface charge from positive to weakly negative at pH ≤ 9; the OPA made it weakly positive at acidic pH values to negative at pH ≥ 7. The PVP surface coating stabilized the nanotubes through steric hindrance in polar protic, dipolar aprotic, and chloroform. In difference to the PVP, the OPA surface coating allowed the nanotubes to be dispersed in n-hexane and chloroform, but not in the polar solvents. The lack of miscibility in the polar solvents, as well as the better dispersion in n-hexane, was attributed to the stronger hydrophobicity of the OPA polymer relative to the PVP. [Figure not available: see fulltext.

  15. Spatially-dispersive surface modes on interfaces of layered hyperbolic metamaterials

    DEFF Research Database (Denmark)

    Popov, Vladislav; Novitsky, Andrey

    2017-01-01

    In this work we present the study of influence of spatial dispersion on the existence of surface modes on the interfaces with multilayered hyperbolic metamaterials (HMMs). To that end we employ operator effective medium approximation correcting the Maxwell Garnett approximation. We find out...

  16. The upper mantle beneath the Gulf of California from surface wave dispersion. Geologica Ultraiectina (299)

    NARCIS (Netherlands)

    Zhang, X.

    2009-01-01

    This thesis is a study on upper mantle shear velocity structure beneath the Gulf of California. Surface wave interstation dispersion data were measured in the Gulf of California area and vicinity to obtain a 3-D shear velocity structure of the upper mantle. This work has particular significance for

  17. Impacts on surface productivity during sediment dispersal experiment in Central Indian Basin

    Digital Repository Service at National Institute of Oceanography (India)

    LokaBharathi, P.A.; Nath, B.N.; Ingole, B.S.; Parthiban, G.; Matondkar, S.G.P.; Raghukumar, C.; Khadge, N.H.; Valsangkar, A.B.; Suryanarayana, A.; Jaisankar, S.; Sharma, R.

    conditions at the point of discharge thus altering the regimes of productivity in the water column. In order to assess the effects of deep sea sediment discharge on the oceanic surface water-layers (0-50M) after nodule mining, a Sediment Dispersal Experiment...

  18. Correlation of Effective Dispersive and Polar Surface Energies in Heterogeneous Self-Assembled Monolayer Coatings

    DEFF Research Database (Denmark)

    Zhuang, Yanxin; Hansen, Ole

    2009-01-01

    grown oil oxidized (100) silicon Surfaces in a vapor phase process using five different precursors. Experimentally, effective surface energy components of the fluorocarbon self-assembled monolayers were determined from measured contact angles using the Owens-Wendt-Rabel-Kaelble method. We show......We show, theoretically, that the measured effective dispersive and polar surface energies of a heterogeneous Surface are correlated; the correlation, however, differs whether a Cassic or an Israelachvili and Gee model is assumed. Fluorocarbon self-assembled monolayers with varying coverage were...

  19. Surface dispersive energy determined with IGC-ID in anti-graffiti-coated building materials

    OpenAIRE

    Carmona-Quiroga, Paula María; Rubio, J.; Sánchez, M. Jesús; Martínez-Ramírez, S.; Blanco-Varela, María Teresa

    2011-01-01

    Coating building materials with anti-graffiti treatments hinders or prevents spray paint adherence by generating low energy surfaces. This paper describes the effect of coating cement paste, lime mortar, granite, limestone and brick with two anti-graffiti agents (a water-base fluoroalkylsiloxane, “Protectosil Antigraffiti®”, and a Zr ormosil) on the dispersive component of the surface energy of these five construction materials. The agents were rediluted in their respective solvents at concen...

  20. Surface plasmon polaritons in a semi-bounded degenerate plasma: Role of spatial dispersion and collisions

    International Nuclear Information System (INIS)

    Tyshetskiy, Yu.; Kompaneets, R.; Vladimirov, S. V.

    2012-01-01

    Surface plasmon polaritons (SPPs) in a semi-bounded degenerate plasma (e.g., a metal) are studied using the quasiclassical mean-field kinetic model, taking into account the spatial dispersion of the plasma (due to quantum degeneracy of electrons) and electron-ion (electron-lattice, for metals) collisions. SPP dispersion and damping are obtained in both retarded (ω/k z ∼c) and non-retarded (ω/k z ≪c) regions, as well as in between. It is shown that the plasma spatial dispersion significantly affects the properties of SPPs, especially at short wavelengths (less than the collisionless skin depth, λ ≲ c/ω pe ). Namely, the collisionless (Landau) damping of SPPs (due to spatial dispersion) is comparable to the purely collisional (Ohmic) damping (due to electron-lattice collisions) in a wide range of SPP wavelengths, e.g., from λ∼20 nm to λ∼0.8 nm for SPP in gold at T = 293 K and from λ∼400 nm to λ∼0.7 nm for SPPs in gold at T = 100 K. The spatial dispersion is also shown to affect, in a qualitative way, the dispersion of SPPs at short wavelengths λ ≲ c/ω pe .

  1. Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene

    Energy Technology Data Exchange (ETDEWEB)

    Uddin, Md. Elias [WCU Program, Department of BIN Fusion Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Kuila, Tapas [Surface Engineering and Tribology, CSIR – Central Mechanical Engineering Research Institute, Durgapur 721 302 (India); Nayak, Ganesh Chandra [Department of Applied Chemistry, ISM Dhanbad, Dhanbad 826 004, Jharkhand (India); Kim, Nam Hoon [Department of Hydrogen and Fuel Cell Engineering, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Ku, Bon-Cheol [Institute of Advanced Composite Materials, Korea Institute of Science and Technology, Dunsan-ri, Bongdong-eup, Wanju-gun, Jeollabuk-do 864-9 (Korea, Republic of); Lee, Joong Hee, E-mail: jhl@chonbuk.ac.kr [WCU Program, Department of BIN Fusion Technology, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of); Department of Hydrogen and Fuel Cell Engineering, Chonbuk National University, Jeonju, Jeonbuk 561-756 (Korea, Republic of)

    2013-06-15

    Highlights: ► Water dispersible graphene has been prepared using ionic and non-ionic surfactants. ► XPS and FTIR spectra analysis confirm surface modification and reduction of GO. ► The highest water dispersibility is observed in the graphene modified with of SDBS. ► The best properties of modified graphene is achieved with GO/surfactant ratio of two. -- Abstract: Ionic and non-ionic surfactant functionalized, water dispersible graphene were prepared to investigate the effects on the dispersion stability and electrical conductivity of graphene. In this study, sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate and 4-(1,1,3,3-tetramethylbutyl) phenyl-polyethylene glycol (Triton X-100) were used as ionic and non-ionic surfactants. The effects of surfactant concentrations on the dispersibility and electrical conductivity of the surface modified graphene were investigated. The dispersion stability of SDBS functionalized graphene (SDBS-G) was found to be best in water at 1.5 mg ml{sup −1}. X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analysis indicate that the presence of surfactants does not prevent the reduction of graphene oxide (GO). These measurements also demonstrated that the surfactants were present on the surface of graphene, resulting in the formation of functionalized graphene. The thickness of different functionalized graphene was measured by Atomic force microscopy and varied significantly with different surfactants. The thermal properties of the functionalized graphene were also found to be dependent on the nature of the surfactants. The electrical conductivity of SDBS-G (108 S m{sup −1}) was comparatively higher than SDS and Triton X-100 functionalized graphene.

  2. Effects of various surfactants on the dispersion stability and electrical conductivity of surface modified graphene

    International Nuclear Information System (INIS)

    Uddin, Md. Elias; Kuila, Tapas; Nayak, Ganesh Chandra; Kim, Nam Hoon; Ku, Bon-Cheol; Lee, Joong Hee

    2013-01-01

    Highlights: ► Water dispersible graphene has been prepared using ionic and non-ionic surfactants. ► XPS and FTIR spectra analysis confirm surface modification and reduction of GO. ► The highest water dispersibility is observed in the graphene modified with of SDBS. ► The best properties of modified graphene is achieved with GO/surfactant ratio of two. -- Abstract: Ionic and non-ionic surfactant functionalized, water dispersible graphene were prepared to investigate the effects on the dispersion stability and electrical conductivity of graphene. In this study, sodium dodecyl benzene sulfonate (SDBS), sodium dodecyl sulfate and 4-(1,1,3,3-tetramethylbutyl) phenyl-polyethylene glycol (Triton X-100) were used as ionic and non-ionic surfactants. The effects of surfactant concentrations on the dispersibility and electrical conductivity of the surface modified graphene were investigated. The dispersion stability of SDBS functionalized graphene (SDBS-G) was found to be best in water at 1.5 mg ml −1 . X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy analysis indicate that the presence of surfactants does not prevent the reduction of graphene oxide (GO). These measurements also demonstrated that the surfactants were present on the surface of graphene, resulting in the formation of functionalized graphene. The thickness of different functionalized graphene was measured by Atomic force microscopy and varied significantly with different surfactants. The thermal properties of the functionalized graphene were also found to be dependent on the nature of the surfactants. The electrical conductivity of SDBS-G (108 S m −1 ) was comparatively higher than SDS and Triton X-100 functionalized graphene

  3. Surface Modification Reaction of Photocatalytic Titanium Dioxide with Triethoxysilane for Improving Dispersibility

    International Nuclear Information System (INIS)

    Lee, Myung Jin; Kim, Ji Ho; Park, Young Tae

    2010-01-01

    We have carried out the surface modification of photocatalytic TiO 2 with triethoxysilane through dehydrogenation reaction and characterized the modified photocatalyst by spectroscopic methods, such as FT-IR, solid-state 29 Si MAS NMR, XPS, and XRF, etc. We also examined photocatalytic activity of the immobilized photocatalytic titanium dioxide with triethoxysilane by decolorization reaction of dyes such as cong red and methylene blue under visible light. Dispersion test showed that the photocatalytic titanium dioxide immobilized with triethoxysilane group has kept higher dispersibility than titanium dioxide itself. No appreciable precipitation takes place even after standing for 24 h in the 4:6 mixture ratio of ethanol and water

  4. Surface treatment to form a dispersed Y2O3 layer on Zircaloy-4 tubes

    Science.gov (United States)

    Jung, Yang-Il; Kim, Hyun-Gil; Guim, Hwan-Uk; Lim, Yoon-Soo; Park, Jung-Hwan; Park, Dong-Jun; Yang, Jae-Ho

    2018-01-01

    Zircaloy-4 is a traditional zirconium-based alloy developed for application in nuclear fuel cladding tubes. The surfaces of Zircaloy-4 tubes were treated using a laser beam to increase their mechanical strength. Laser beam scanning of a tube coated with yttrium oxide (Y2O3) resulted in the formation of a dispersed oxide layer in the tube's surface region. Y2O3 particles penetrated the Zircaloy-4 during the laser treatment and were distributed uniformly in the surface region. The thickness of the dispersed oxide layer varied from 50 to 140 μm depending on the laser beam trajectory. The laser treatment also modified the texture of the tube. The preferred basal orientation along the normal to the tube surface disappeared, and a random structure appeared after laser processing. The most obvious result was an increase in the mechanical strength. The tensile strength of Zircaloy-4 increased by 10-20% with the formation of the dispersed oxide layer. The compressive yield stress also increased, by more than 15%. Brittle fracture was observed in the surface-treated samples during tensile and compressive deformation at room temperature; however, the fracture behavior was changed in ductile at elevated temperatures.

  5. Dispersive and Covalent Interactions between Graphene and Metal Surfaces from the Random Phase Approximation

    DEFF Research Database (Denmark)

    Olsen, Thomas; Yan, Jun; Mortensen, Jens Jørgen

    2011-01-01

    We calculate the potential energy surfaces for graphene adsorbed on Cu(111), Ni(111), and Co(0001) using density functional theory and the random phase approximation (RPA). For these adsorption systems covalent and dispersive interactions are equally important and while commonly used approximations...... for exchange-correlation functionals give inadequate descriptions of either van der Waals or chemical bonds, RPA accounts accurately for both. It is found that the adsorption is a delicate competition between a weak chemisorption minimum close to the surface and a physisorption minimum further from the surface....

  6. Effect of strontium tantalate surface texture on nickel nanoparticle dispersion by electroless deposition

    Energy Technology Data Exchange (ETDEWEB)

    Compean-González, C.L. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Civil, Departamento de Ecomateriales y Energía, Av. Universidad s/n, Ciudad Universitaria, San Nicolás de los Garza, Nuevo León C.P. 66451 (Mexico); Arredondo-Torres, V.M. [Facultad de Químico Farmacobiología, Universidad Michoacana de San Nicolás de Hidalgo, Tzintzuntzan #173, Col. Matamoros, Morelia, Michoacán C.P. 58240 (Mexico); Zarazúa-Morin, M.E. [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Civil, Departamento de Ecomateriales y Energía, Av. Universidad s/n, Ciudad Universitaria, San Nicolás de los Garza, Nuevo León C.P. 66451 (Mexico); Figueroa-Torres, M.Z., E-mail: m.zyzlila@gmail.com [Universidad Autónoma de Nuevo León, Facultad de Ingeniería Civil, Departamento de Ecomateriales y Energía, Av. Universidad s/n, Ciudad Universitaria, San Nicolás de los Garza, Nuevo León C.P. 66451 (Mexico)

    2015-09-15

    Highlights: • Efficient short-time procedure for nickel nanoparticles dispersion by electroless. • Nanoparticles are spherical in shape with an average size of 15 nm. • Influence of surface texture on deposition temperature and time was observed. • Nickel deposition can be done below 50 °C. - Abstract: The present work studies the effect of smooth and porous texture of Sr{sub 2}Ta{sub 2}O{sub 7} on its surface modification with nickel nanoparticles through electroless deposition technique. The influence of temperature to control Ni nanoparticles loading amount and dispersion were analyzed. Nitrogen adsorption isotherms were used to examine surface texture characteristics. The morphology was observed by scanning electron microscopy (MEB) equipped with an energy dispersive spectrometry system (EDS), which was used to determine the amount of deposited Ni. The material with smooth texture (SMT) consists of big agglomerates of semispherical shape particles of 400 nm. Whilst the porous texture (PRT) exhibit a pore-wall formed of needles shape particles of around 200 nm in size. Results indicated that texture characteristics strongly influence the deposition reaction rate; for PRT oxide, Ni deposition can be done from 20 °C while for SMT oxide deposition begins at 40 °C. Analysis of Sr{sub 2}Ta{sub 2}O{sub 7} surface indicated that in both textures, Ni nanoparticles with spherical shape in the range of 10–20 nm were obtained.

  7. Effect of strontium tantalate surface texture on nickel nanoparticle dispersion by electroless deposition

    International Nuclear Information System (INIS)

    Compean-González, C.L.; Arredondo-Torres, V.M.; Zarazúa-Morin, M.E.; Figueroa-Torres, M.Z.

    2015-01-01

    Highlights: • Efficient short-time procedure for nickel nanoparticles dispersion by electroless. • Nanoparticles are spherical in shape with an average size of 15 nm. • Influence of surface texture on deposition temperature and time was observed. • Nickel deposition can be done below 50 °C. - Abstract: The present work studies the effect of smooth and porous texture of Sr 2 Ta 2 O 7 on its surface modification with nickel nanoparticles through electroless deposition technique. The influence of temperature to control Ni nanoparticles loading amount and dispersion were analyzed. Nitrogen adsorption isotherms were used to examine surface texture characteristics. The morphology was observed by scanning electron microscopy (MEB) equipped with an energy dispersive spectrometry system (EDS), which was used to determine the amount of deposited Ni. The material with smooth texture (SMT) consists of big agglomerates of semispherical shape particles of 400 nm. Whilst the porous texture (PRT) exhibit a pore-wall formed of needles shape particles of around 200 nm in size. Results indicated that texture characteristics strongly influence the deposition reaction rate; for PRT oxide, Ni deposition can be done from 20 °C while for SMT oxide deposition begins at 40 °C. Analysis of Sr 2 Ta 2 O 7 surface indicated that in both textures, Ni nanoparticles with spherical shape in the range of 10–20 nm were obtained

  8. Investigation of Selective Laser Melting Surface Alloyed Aluminium Metal Matrix Dispersive Reinforced Layers

    Science.gov (United States)

    Kamburov, V. V.; Dimitrova, R. B.; Kandeva, M. K.; Sofronov, Y. P.

    2018-01-01

    The aim of the paper is to investigate the improvement of mechanical properties and in particular wear resistance of laser surface alloyed dispersive reinforced thin layers produced by selective laser melting (SLM) technology. The wear resistance investigation of aluminium matrix composite layers in the conditions of dry friction surface with abrasive particles and nanoindentation tests were carried out. The process parameters (as scan speed) and their impact on the wear resistant layers have been evaluated. The alloyed layers containing metalized SiC particles were studied by Optical and Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray microanalysis (EDX). The obtained experimental results of the laser alloyed thin layers show significant development of their wear resistance and nanohardness due to the incorporated reinforced phase of electroless nickel coated SiC particles.

  9. The sensitivity of the surface oil signature to subsurface dispersant injection and weather conditions.

    Science.gov (United States)

    Daae, Ragnhild L; Skancke, Jørgen; Brandvik, Per Johan; Faksness, Liv-Guri

    2018-02-01

    Subsea blowouts have the potential to spread oil across large geographical areas, and subsea dispersant injection (SSDI) is a response option targeted at reducing the impact of a blowout, especially reducing persistent surface oil slicks. Modified Weber scaling was used to predict oil droplet sizes with the OSCAR oil spill model, and to evaluate the surface oil volume and area when using SSDI under different conditions. Generally, SSDI reduces the amount of oil on the surface, and creates wider and thinner surface oil slicks. It was found that the reduction of surface oil area and volume with SSDI was enhanced for higher wind speeds. Overall, given the effect of SSDI on oil volume and weathering, it may be suggested that tar ball formation, requiring thick and weathered oil, could possibly be reduced when SSDI is used. Copyright © 2017 Elsevier Ltd. All rights reserved.

  10. The use of multiwavelets for uncertainty estimation in seismic surface wave dispersion.

    Energy Technology Data Exchange (ETDEWEB)

    Poppeliers, Christian [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

    2017-12-01

    This report describes a new single-station analysis method to estimate the dispersion and uncer- tainty of seismic surface waves using the multiwavelet transform. Typically, when estimating the dispersion of a surface wave using only a single seismic station, the seismogram is decomposed into a series of narrow-band realizations using a bank of narrow-band filters. By then enveloping and normalizing the filtered seismograms and identifying the maximum power as a function of frequency, the group velocity can be estimated if the source-receiver distance is known. However, using the filter bank method, there is no robust way to estimate uncertainty. In this report, I in- troduce a new method of estimating the group velocity that includes an estimate of uncertainty. The method is similar to the conventional filter bank method, but uses a class of functions, called Slepian wavelets, to compute a series of wavelet transforms of the data. Each wavelet transform is mathematically similar to a filter bank, however, the time-frequency tradeoff is optimized. By taking multiple wavelet transforms, I form a population of dispersion estimates from which stan- dard statistical methods can be used to estimate uncertainty. I demonstrate the utility of this new method by applying it to synthetic data as well as ambient-noise surface-wave cross-correlelograms recorded by the University of Nevada Seismic Network.

  11. Dispersion and Polarization of Surface Waves Trapped in High Aspect Ratio Electrode Arrays

    DEFF Research Database (Denmark)

    Laude, Vincent; Dühring, Maria Bayard; Moubchir, Hanane

    2007-01-01

    .Phys., 90(5):2492, 2001; Appl. Phys. Lett., 89:083515, 2006.) an experimental and theoretical analysis of the transduction of SAW under a metallic array of electrodes with a large aspect ratio on a piezoelectric substrate, whereby allowing the electrode height to become larger than one wavelength...... additional results on the polarization and the dispersion of the surface waves trapped by high aspect ratio electrode arrays. A finite element model, including periodic boundary conditions along the propagation direction and a perfectly matched layer (PML) to absorb waves away from the surface...... wave vector values....

  12. Surface-induced patterns from evaporating droplets of aqueous carbon nanotube dispersions

    KAUST Repository

    Zeng, Hongbo

    2011-06-07

    Evaporation of aqueous droplets of carbon nanotubes (CNTs) coated with a physisorbed layer of humic acid (HA) on a partially hydrophilic substrate induces the formation of a film of CNTs. Here, we investigate the role that the global geometry of the substrate surfaces has on the structure of the CNT film. On a flat mica or silica surface, the evaporation of a convex droplet of the CNT dispersion induces the well-known "coffee ring", while evaporation of a concave droplet (capillary meniscus) of the CNT dispersion in a wedge of two planar mica sheets or between two crossed-cylinder sheets induces a large area (>mm 2) of textured or patterned films characterized by different short- and long-range orientational and positional ordering of the CNTs. The resulting patterns appear to be determined by two competing or cooperative sedimentation mechanisms: (1) capillary forces between CNTs giving micrometer-sized filaments parallel to the boundary line of the evaporating droplet and (2) fingering instability at the boundary line of the evaporating droplet and subsequent pinning of CNTs on the surface giving micrometer-sized filaments of CNTs perpendicular to this boundary line. The interplay between substrate surface geometry and sedimentation mechanisms gives an extra control parameter for manipulating patterns of self-assembling nanoparticles at substrate surfaces. © 2011 American Chemical Society.

  13. Spatially-varying surface roughness and ground-level air quality in an operational dispersion model

    International Nuclear Information System (INIS)

    Barnes, M.J.; Brade, T.K.; MacKenzie, A.R.; Whyatt, J.D.; Carruthers, D.J.; Stocker, J.; Cai, X.; Hewitt, C.N.

    2014-01-01

    Urban form controls the overall aerodynamic roughness of a city, and hence plays a significant role in how air flow interacts with the urban landscape. This paper reports improved model performance resulting from the introduction of variable surface roughness in the operational air-quality model ADMS-Urban (v3.1). We then assess to what extent pollutant concentrations can be reduced solely through local reductions in roughness. The model results suggest that reducing surface roughness in a city centre can increase ground-level pollutant concentrations, both locally in the area of reduced roughness and downwind of that area. The unexpected simulation of increased ground-level pollutant concentrations implies that this type of modelling should be used with caution for urban planning and design studies looking at ventilation of pollution. We expect the results from this study to be relevant for all atmospheric dispersion models with urban-surface parameterisations based on roughness. -- Highlights: • Spatially variable roughness improved performance of an operational model. • Scenario modelling explored effect of reduced roughness on air pollution. • Reducing surface roughness can increase modelled ground-level pollution. • Damped vertical mixing outweighs increased horizontal advection in model study. • Result should hold for any model with a land-surface coupling based on roughness. -- Spatially varying roughness improves model simulations of urban air pollutant dispersion. Reducing roughness does not always decrease ground-level pollution concentrations

  14. Robust Imaging Methodology for Challenging Environments: Wave Equation Dispersion Inversion of Surface Waves

    KAUST Repository

    Li, Jing

    2017-12-22

    A robust imaging technology is reviewed that provide subsurface information in challenging environments: wave-equation dispersion inversion (WD) of surface waves for the shear velocity model. We demonstrate the benefits and liabilities of the method with synthetic seismograms and field data. The benefits of WD are that 1) there is no layered medium assumption, as there is in conventional inversion of dispersion curves, so that the 2D or 3D S-velocity model can be reliably obtained with seismic surveys over rugged topography, and 2) WD mostly avoids getting stuck in local minima. The synthetic and field data examples demonstrate that WD can accurately reconstruct the S-wave velocity distributions in laterally heterogeneous media if the dispersion curves can be identified and picked. The WD method is easily extended to anisotropic media and the inversion of dispersion curves associated with Love wave. The liability is that is almost as expensive as FWI and only recovers the Vs distribution to a depth no deeper than about 1/2~1/3 wavelength.

  15. Energy storage and dispersion of surface acoustic waves trapped in a periodic array of mechanical resonators

    DEFF Research Database (Denmark)

    Dühring, Maria Bayard; Laude, Vincent; Khelif, Abdelkrim

    2009-01-01

    confined to the electrode as compared to the total mechanical energy is calculated and is found to be increasing for increasing aspect ratio and to tend to a definite limit for the two families of surface waves. This observation is in support of the interpretation that high aspect ratio electrodes act......It has been shown previously that surface acoustic waves can be efficiently trapped and slowed by steep ridges on a piezoelectric substrate, giving rise to two families of shear-horizontal and vertically polarized surface waves. The mechanisms of energy storage and dispersion are explored by using...... the finite element method to model surface acoustic waves generated by high aspect ratio electrodes. A periodic model is proposed including a perfectly matched layer to simulate radiation conditions away from the sources, from which the modal distributions are found. The ratio of the mechanical energy...

  16. Spectrally resolved surface plasmon resonance dispersion using half-ball optics

    Science.gov (United States)

    Dehmel, Raphael; Baumberg, Jeremy J.; Steiner, Ullrich; Wilts, Bodo D.

    2017-11-01

    In this work, a variant of a Kretschmann-type surface plasmon resonance (SPR) sensor is introduced. k-space imaging is combined with half-ball glass optics to facilitate the measurement of SPRs across the visible spectral range. In contrast to current state-of-the-art techniques, which are widely utilized in commercially available systems, the presented method allows single-shot-acquisition of the full angular reflection without any moving parts, as well as mapping of the surface plasmon dispersion by scanning across the entire visible wavelength range. Measurements on various thin metallic films demonstrate the sensitivity of the system towards minute changes of the metal surface and its close vicinity. The fast and precise measurement of surface plasmon resonances paves the way for improved detection in applications such as immunoassays or gas-sensors, especially for real-time in situ measurements.

  17. Influence of surface modification adopting thermal treatments on dispersion of detonation nanodiamond

    International Nuclear Information System (INIS)

    Xu Xiangyang; Yu Zhiming; Zhu Yongwei; Wang Baichun

    2005-01-01

    In order to improve the dispersion of detonation nanodiamonds (ND) in aqueous and non-aqueous media, a series of thermal treatments have been conducted in air ambient to modify ND surface. Small angle X-ray scattering (SAXS) technique and high resolution transmission electron microscopy (HRTEM) were introduced to observe the primary size of ND. Differential thermal analysis (DTA), X-ray diffraction (XRD) methodology, X-ray photoelectron spectroscopy (XPS) and Fourier transform infrared (FTIR) spectroscopy were adopted to analyze the structure, bonds at surfaces of the treated ND. Malvern instrument Zetasizer3000HS was used for measuring the surface electric potential and the size distribution of ND. As thermal treatments can cause graphitization and oxidization of functional groups at the surface, ND treated at high temperature is correspondingly more negatively charged in an aqueous medium, and the increased absolute value of zeta potential ensures the electrostatic stability of ND particles. Specially, after being treated at a temperature more than 850K, ND can be well dispersed in various media

  18. Morphological study of polymer surfaces exposed to non-thermal plasma based on contact angle and the use of scaling laws

    Energy Technology Data Exchange (ETDEWEB)

    Felix, T., E-mail: tsfelix81@gmail.com [Chemistry Department, Federal University of Santa Catarina, Campus Trindade, 88040-900 Florianópolis, SC (Brazil); Cassini, F.A.; Benetoli, L.O.B. [Chemistry Department, Federal University of Santa Catarina, Campus Trindade, 88040-900 Florianópolis, SC (Brazil); Dotto, M.E.R. [Physics Department, Federal University of Santa Catarina, Campus Trindade, 88040-900 Florianópolis, SC (Brazil); Debacher, N.A. [Chemistry Department, Federal University of Santa Catarina, Campus Trindade, 88040-900 Florianópolis, SC (Brazil)

    2017-05-01

    Highlights: • Polymeric surfaces were etched using non-thermal plasma at different intensities. • Polymers of low mechanical hardness reached the saturation level faster. • A mathematical model based on scaling laws was proposed. - Abstract: The experiments presented in this communication have the purpose to elaborate an explanation for the morphological evolution of the growth of polymeric surfaces provided by the treatment of non-thermal plasma. According to the roughness analysis and the model proposed by scaling laws it is possible relate to a predictable or merely random effect. Polyethylene terephthalate (PET) and poly(etherether)ketone (PEEK) samples were exposed to a non-thermal plasma discharge and the resulting surfaces roughness were analyzed based on the measurements from contact angle, scanning electron microscopy and atomic force microscopy coupled with scaling laws analysis which can help to describe and understand the dynamic of formation of a wide variety of rough surfaces. The roughness, R{sub RMS} (RMS- Root Mean Square) values for polymer surface range between 19.8 nm and 110.9 nm. The contact angle and the AFM (Atomic Force Microscopy) measurements as a function of the plasma exposure time were in agreement with both polar and dispersive components according to the surface roughness and also with the morphology evaluated described by Wolf-Villain model, with proximate values of α between 0.91{sub (PET)} and 0.88{sub (PEEK)}, β = 0.25{sub (PET)} and z = 3,64{sub (PET)}.

  19. Weighted interior penalty discretization of fully nonlinear and weakly dispersive free surface shallow water flows

    Science.gov (United States)

    Di Pietro, Daniele A.; Marche, Fabien

    2018-02-01

    In this paper, we further investigate the use of a fully discontinuous Finite Element discrete formulation for the study of shallow water free surface flows in the fully nonlinear and weakly dispersive flow regime. We consider a decoupling strategy in which we approximate the solutions of the classical shallow water equations supplemented with a source term globally accounting for the non-hydrostatic effects. This source term can be computed through the resolution of elliptic second-order linear sub-problems, which only involve second order partial derivatives in space. We then introduce an associated Symmetric Weighted Internal Penalty discrete bilinear form, allowing to deal with the discontinuous nature of the elliptic problem's coefficients in a stable and consistent way. Similar discrete formulations are also introduced for several recent optimized fully nonlinear and weakly dispersive models. These formulations are validated again several benchmarks involving h-convergence, p-convergence and comparisons with experimental data, showing optimal convergence properties.

  20. Lithospheric Structure of the Arabian Shield from the Joint Inversion of Receiver Function and Surface-Wave Dispersion Observations

    National Research Council Canada - National Science Library

    Julia, Jordi; Ammon, Charles J; Herrimann, Robert B

    2006-01-01

    .... Receiver functions are primarily sensitive to shear-wave velocity contrasts and vertical travel times and surface-wave dispersion measurements are sensitive to vertical shear-wave velocity averages...

  1. Lithospheric Structure of the Arabian Shield From the Joint Inversion of Receiver Function and Surface-Wave Dispersion Observations

    National Research Council Canada - National Science Library

    Herrmann, Robert B; Julia, Jordi; Ammon, Charles J

    2007-01-01

    .... Receiver functions are primarily sensitive to shear-wave velocity contrast and vertical travel times and surface-wave dispersion measurements are sensitive to vertical shear-wave velocity averages...

  2. Reciprocity Laws for the Higher Tame Symbol and the Witt Symbol on an Algebraic Surface

    OpenAIRE

    Syder, Kirsty

    2013-01-01

    Parshin's higher Witt pairing on an arithmetic surface can be combined with the higher tame pairing to form a symbol taking values in the absolute abelian Galois group of the function field. We prove reciprocity laws for this symbol using techniques of Morrow for the Witt symbol and Romo for the higher tame symbol.

  3. Confinement of surface waves at the air-water interface to control aerosol size and dispersity

    Science.gov (United States)

    Nazarzadeh, Elijah; Wilson, Rab; King, Xi; Reboud, Julien; Tassieri, Manlio; Cooper, Jonathan M.

    2017-11-01

    The precise control over the size and dispersity of droplets, produced within aerosols, is of great interest across many manufacturing, food, cosmetic, and medical industries. Amongst these applications, the delivery of new classes of high value drugs to the lungs has recently attracted significant attention from pharmaceutical companies. This is commonly achieved through the mechanical excitation of surface waves at the air liquid interface of a parent liquid volume. Previous studies have established a correlation between the wavelength on the surface of liquid and the final aerosol size. In this work, we show that the droplet size distribution of aerosols can be controlled by constraining the liquid inside micron-sized cavities and coupling surface acoustic waves into different volumes of liquid inside micro-grids. In particular, we show that by reducing the characteristic physical confinement size (i.e., either the initial liquid volume or the cavities' diameters), higher harmonics of capillary waves are revealed with a consequent reduction of both aerosol mean size and dispersity. In doing so, we provide a new method for the generation and fine control of aerosols' sizes distribution.

  4. Effect of a surface oxide-dispersion-strengthened layer on mechanical strength of zircaloy-4 tubes

    Directory of Open Access Journals (Sweden)

    Yang-Il Jung

    2018-03-01

    Full Text Available An oxide-dispersion-strengthened (ODS layer was formed on Zircaloy-4 tubes by a laser beam scanning process to increase mechanical strength. Laser beam was used to scan the yttrium oxide (Y2O3–coated Zircaloy-4 tube to induce the penetration of Y2O3 particles into Zircaloy-4. Laser surface treatment resulted in the formation of an ODS layer as well as microstructural phase transformation at the surface of the tube. The mechanical strength of Zircaloy-4 increased with the formation of the ODS layer. The ring-tensile strength of Zircaloy-4 increased from 790 to 870 MPa at room temperature, from 500 to 575 MPa at 380°C, and from 385 to 470 MPa at 500°C. Strengthening became more effective as the test temperature increased. It was noted that brittle fracture occurred at room temperature, which was not observed at elevated temperatures. Resistance to dynamic high-temperature bursting improved. The burst temperature increased from 760 to 830°C at a heating rate of 5°C/s and internal pressure of 8.3 MPa. The burst opening was also smaller than those in fresh Zircaloy-4 tubes. This method is expected to enhance the safety of Zr fuel cladding tubes owing to the improvement of their mechanical properties. Keywords: Laser Surface Treatment, Microstructure, Oxide Dispersion Strengthened Alloy, Tensile Strength, Zirconium Alloy

  5. Coating polypropylene surfaces with protease weakens the adhesion and increases the dispersion of Candida albicans cells.

    Science.gov (United States)

    Andreani, Eugenio Spadoni; Villa, Federica; Cappitelli, Francesca; Krasowska, Anna; Biniarz, Piotr; Łukaszewicz, Marcin; Secundo, Francesco

    2017-03-01

    To investigate the ability of the proteases, subtilisin and α-chymotrypsin (aCT), to inhibit the adhesion of Candida albicans biofilm to a polypropylene surface. The proteases were immobilized on plasma-treated polypropylene by covalently linking them with either glutaraldehyde (GA) or N'-diisopropylcarbodiimide (DIC) and N-hydroxysuccinimide (NHS). The immobilization did not negatively affect the enzyme activity and in the case of subtilisin, the activity was up to 640% higher than that of the free enzyme when using N-acetyl phenylalanine ethyl ester as the substrate. The efficacies against biofilm dispersal for the GA-linked SubC and aCT coatings were 41 and 55% higher than the control (polypropylene coated with only GA), respectively, whereas no effect was observed with enzymes immobilized with DIC and NHS. The higher dispersion efficacy observed for the proteases immobilized with GA could be both steric (proper orientation of the active site) and dynamic (higher protein mobility/flexibility). Proteases immobilized on a polypropylene surface reduced the adhesion of C. albicans biofilms and therefore may be useful in developing anti-biofilm surfaces based on non-toxic molecules and sustainable strategies.

  6. Crustal thickness estimates for Baja California, Sonora, and Sinaloa, Mexico, using disperse surface waves

    Science.gov (United States)

    López-Pineda, Leobardo; Rebollar, Cecilio J.; Quintanar, Luis

    2007-04-01

    Dispersed surface waves of regional events recorded at Network of Autonomously Recording Seismographs (NARS)-Baja and Red Sísmica de Banda Ancha (RESBAN) networks located over the Baja California Peninsula, Sonora, and Sinaloa, Mexico, were used to estimate shear wave elastic models and crustal thickness. We analyzed fundamental modes of surface waves with period between 10 and 40 s. Multiple filter analysis and the inversion method described by Herrmann and Ammon (2003) was used. Crustal thickness estimates for the Peninsular Ranges of Northern Baja California agree with those obtained by previous studies in the Peninsular Ranges of Northern Baja California. We analyzed dispersion of surface waves with northwest-southeast travel paths along the east and west sides of the Baja California Peninsula as well as a northwest-southeast travel path along the western sides of the Mexican states of Sonora and Sinaloa. It was found that the crustal structure east of the Baja California Peninsula is similar to the structure of Sonora and Sinaloa. The correlation between those two structures suggests dextral offset of the order of 275 ± 25 km if we consider Baja California Peninsula as a rigid body moving toward the northwest relative to the North America plate. This displacement between the structures is in agreement with the displacement determined by the dating of Miocene deposits located in San Felipe on the Baja California Peninsula (Pacific plate), and Isle Tiburon located west of Sonora (North America plate).

  7. Differential scanning calorimetry and surface morphology studies on coated pellets using aqueous dispersions.

    Science.gov (United States)

    Nisar-ur-Rahman; K H, Yuen; Jia Woei, Wong; Khan, Nurzalina A k

    2005-04-01

    The present study was conducted to examine the physicochemical changes during passage of drug through polymeric membranes and observe the surface morphology features of the coated pellets using scanning electron microscopy (SEM). Drug solution was first sprayed around inert pellets to form drug-layered pellets that were coated with two commercial aqueous dispersions namely, Eudragit NE30 and Kollicoat SR30 using bottom-spray fluidized bed technique. Differential scanning calorimetry (DSC) confirmed that no interactions existed between drug and polymers. Small peak of drug was observed in the DSC thermograms of Eudragit NE30 coated pellets indicating that small amount of drug was still present in the polymeric membrane after dissolution. Views of SEM revealed as the coating levels of two types of aqueous dispersions were increased the surface of the pellets become more uniform and compact. Therefore, the diffusion length for dissolution medium to enter the drug layer and dissolved drug to diffuse out would be increased at higher coating levels. The polymer surface of coated pellets after 12 hours dissolution testing seemed to be shrunk and size of the pellets were also reduced indicating the depletion of reservoir layer.

  8. Cluster analysis applied to localized dispersion curves in East Asia: the limits of surface wave resolution

    Science.gov (United States)

    Witek, M.; van der Lee, S.; Kang, T. S.; Chang, S. J.; Ning, J.; Ning, S.

    2017-12-01

    We have measured Rayleigh wave group velocity dispersion curves from one year of station-pair cross-correlations of continuous vertical-component broadband data from 1082 seismic stations in regional networks across China, Korea, Taiwan, and Japan for the year 2011. We use the measurements to map local dispersion anomalies for periods in the range 6-40 s. We combined our ambient noise data set with the earthquake group velocity data set of Ma et al. (2014), and then applied agglomerative hierarchical clustering to the localized dispersion curves. We find that the dispersion curves naturally organize themselves into distinct tectonic regions. For our distribution of interstation distances, only 8 distinct regions need to be defined. Additional clusters reduce the overall data misfit by increasingly smaller amounts. The size and number of clusters needed to suitably predict the data may give an indication of the resolving power of the data set. The regions that emerge from the cluster analysis include Tibet, the Sea of Japan, the South China Block and the Korean peninsula, the Ordos and Yangtze cratons, and Mesozoic rift basins such as the Songliao, Bohai Bay and Ulleung basins. We also performed a traditional inversion for 3D S-velocity structure, and the resulting model fits the data as well as the 8-cluster model, while both models fit the earthquake data and ambient noise data better than the LITHO1.0 model of Pasyanos et al. (2014). Our 3D model of the crust and upper mantle confirms many of the features seen in previous studies of the region, most notably the lithospheric thinning going from west to east and low velocity zones in the crust on the Tibetan periphery. We conclude that cluster analysis is able to greatly reduce the dimensionality of surface wave dispersion data, in the sense that a data set of over half a million dispersion curves is sufficiently predicted by appropriately averaging over a relatively small set of distinct tectonic regions. The

  9. Electrochromic coatings made of surface modified rutile and anatase pigments: Influence of trisilanol POSS dispersant on electrochromic effect

    International Nuclear Information System (INIS)

    Mihelčič, Mohor; Francetič, Vojmir; Pori, Pavli; Gradišar, Helena; Kovač, Janez; Orel, Boris

    2014-01-01

    Graphical abstract: - Highlights: • Transparent pigmented coatings were deposited from titania dispersions. • Trisilanol POSS was used as dispersant. • Surface modification of pigment particles was established from TEM, TG and IR. • IR spectra studies revealed covalent and H-bond dispersant/pigment interactions. • Electrochromic properties of titanina pigment coatings were shown and discussed. - Abstract: Polyhedral oligomeric silsesqioxanes (POSS) compounds consisting of [RSiO 3/2 ] n groups organized in the form of various polyhedra (T n , n = 3, 6, 8, 10, 12, ….) have not often been used as pigment surface modifiers. Their interactions with pigments are not known in detail and coatings deposited from pigments modified by POSS dispersants are rare. Identification of interactions between a dispersant and the surface of pigments is important from the point of view of obtaining stable pigment dispersions enabling the deposition of optical coatings with high pigment loading, low haze and mechanical integrity. Thin TiO 2 (anatase) pigment coatings (70–260 nm) were deposited from pigment dispersions prepared by milling metatitanic acid (mTiA) powder agglomerates with trisilanol heptaisobutyl silsesquioxane dispersant (trisilanol POSS) in butanol and hexane. The results of TEM, EDAX and TG measurements confirmed the influence of trisilanol POSS dispersant on the formation of a dispersion with a uniform distribution of mTiA and rutile (mTiR) nanoparticles with a size of about 30 ± 5.0 nm and 90 ± 5.0 nm, respectively, as determined from dynamic light scattering (DLS) measurements. The mTiA/trisilanol POSS dispersions with added titanium tetraisopropoxide were deposited on fluorine-doped tin oxide (FTO) coated glass (spin-coating) and indium tin oxide coated polymeric substrate (ITO PET) (coil-coating) and thermally treated at 150 °C. UV–vis spectra, AFM and SEM results showed that the pigment coatings exhibited low haze (up to 6%), low surface

  10. Expressions to Rayleigh circumferential phase velocity and dispersion relation for a cylindrical surface under mechanical pressure

    Science.gov (United States)

    Sebold, Jean Eduardo; de Lacerda, Luiz Alkimin

    2018-04-01

    This paper describes a substantiated mathematical theory for Rayleigh waves propagated on some types of metal cylinders. More specifically, it presents not only a new way to express the dispersion relation of Rayleigh waves propagated on the cylindrical surface, but also how it can be used to construct a mathematical equation showing that the applied static mechanical pressure affects the shear modulus of the metal cylinder. All steps, required to conclude the process, consider the equation of motion as a function of radial and circumferential coordinates only, while the axial component can be overlooked without causing any problems. Some numerical experiments are done to illustrate the changes in the Rayleigh circumferential phase velocity in a metal cylindrical section due to static mechanical pressure around its external surface.

  11. Refractive index dispersion of swift heavy ion irradiated BFO thin films using Surface Plasmon Resonance technique

    Energy Technology Data Exchange (ETDEWEB)

    Paliwal, Ayushi [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India); Sharma, Savita [Department of Applied Physics, Delhi Technological University, Delhi (India); Tomar, Monika [Physics Department, Miranda House, University of Delhi, Delhi 110007 (India); Singh, Fouran [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110075 (India); Gupta, Vinay, E-mail: drguptavinay@gmail.com [Department of Physics and Astrophysics, University of Delhi, Delhi 110007 (India)

    2016-07-15

    Highlights: • Investigated the optical properties of BiFeO{sub 3} (BFO) thin films after irradiation using SPR. • Otto configuration has been used to excite the surface plasmons using gold metal thin film. • BFO thin films were prepared by sol–gel spin coating technique. • Examined the refractive index dispersion of pristine and irradiated BFO thin film. - Abstract: Swift heavy ion irradiation (SHI) is an effective technique to induce defects for possible modifications in the material properties. There is growing interest in studying the optical properties of multiferroic BiFeO{sub 3} (BFO) thin films for optoelectronic applications. In the present work, BFO thin films were prepared by sol–gel spin coating technique and were irradiated using the 15 UD Pelletron accelerator with 100 MeV Au{sup 9+} ions at a fluence of 1 × 10{sup 12} ions cm{sup −2}. The as-grown films became rough and porous on ion irradiation. Surface Plasmon Resonance (SPR) technique has been identified as a highly sensitive and powerful technique for studying the optical properties of a dielectric material. Optical properties of BFO thin films, before and after irradiation were studied using SPR technique in Otto configuration. Refractive index is found to be decreasing from 2.27 to 2.14 on ion irradiation at a wavelength of 633 nm. Refractive index dispersion of BFO thin film (from 405 nm to 633 nm) before and after ion radiation was examined.

  12. Ultrafast dark-field surface inspection with hybrid-dispersion laser scanning

    Science.gov (United States)

    Yazaki, Akio; Kim, Chanju; Chan, Jacky; Mahjoubfar, Ata; Goda, Keisuke; Watanabe, Masahiro; Jalali, Bahram

    2014-06-01

    High-speed surface inspection plays an important role in industrial manufacturing, safety monitoring, and quality control. It is desirable to go beyond the speed limitation of current technologies for reducing manufacturing costs and opening a new window onto a class of applications that require high-throughput sensing. Here, we report a high-speed dark-field surface inspector for detection of micrometer-sized surface defects that can travel at a record high speed as high as a few kilometers per second. This method is based on a modified time-stretch microscope that illuminates temporally and spatially dispersed laser pulses on the surface of a fast-moving object and detects scattered light from defects on the surface with a sensitive photodetector in a dark-field configuration. The inspector's ability to perform ultrafast dark-field surface inspection enables real-time identification of difficult-to-detect features on weakly reflecting surfaces and hence renders the method much more practical than in the previously demonstrated bright-field configuration. Consequently, our inspector provides nearly 1000 times higher scanning speed than conventional inspectors. To show our method's broad utility, we demonstrate real-time inspection of the surface of various objects (a non-reflective black film, transparent flexible film, and reflective hard disk) for detection of 10 μm or smaller defects on a moving target at 20 m/s within a scan width of 25 mm at a scan rate of 90.9 MHz. Our method holds promise for improving the cost and performance of organic light-emitting diode displays for next-generation smart phones, lithium-ion batteries for green electronics, and high-efficiency solar cells.

  13. Functionalization of Cadmium Selenide Quantum Dots with Poly(ethylene glycol): Ligand Exchange, Surface Coverage, and Dispersion Stability.

    Science.gov (United States)

    Wenger, Whitney Nowak; Bates, Frank S; Aydil, Eray S

    2017-08-22

    Semiconductor quantum dots synthesized using rapid mixing of precursors by injection into a hot solution of solvents and surfactants have surface ligands that sterically stabilize the dispersions in nonpolar solvents. Often, these ligands are exchanged to disperse the quantum dots in polar solvents, but quantitative studies of quantum dot surfaces before and after ligand exchange are scarce. We studied exchanging trioctylphosphine (TOP) and trioctylphosphine oxide (TOPO) ligands on as-synthesized CdSe quantum dots dispersed in hexane with a 2000 g/mol thiolated poly(ethylene glycol) (PEG) polymer. Using infrared spectroscopy we quantify the absolute surface concentration of TOP/TOPO and PEG ligands per unit area before and after ligand exchange. While 50-85% of the TOP/TOPO ligands are removed upon ligand exchange, only a few are replaced with PEG. Surprisingly, the remaining TOP/TOPO ligands outnumber the PEG ligands, but these few PEG ligands are sufficient to disperse the quantum dots in polar solvents such as chloroform, tetrahydrofuran, and water. Moreover, as-synthesized quantum dots once easily dispersed in hexane are no longer dispersible in nonpolar solvents after ligand exchange. A subtle coverage-dependent balance between attractive PEG-solvent interactions and repulsive TOP/TOPO-solvent interactions determines the dispersion stability.

  14. Surface self-assembly of fluorosurfactants during film formation of MMA/nBA colloidal dispersions.

    Science.gov (United States)

    Dreher, W R; Urban, M W

    2004-11-23

    These studies focus on the behavior of fluorosurfactants (FS) containing hydrophobic and ionic entities in the presence of methyl methacrylate/n-butyl acrylate (MMA/nBA) colloidal dispersions stabilized by sodium dodecyl sulfate (SDS). The presence of FS significantly not only alters the mobility of SDS in MMA/nBA films, but their hydrophobic and ionic nature results in self-assembly near the film-air (F-A) interface leading to different surface morphologies. Spherical islands and rodlike morphologies are formed which diminish the kinetic coefficient of friction of films by at least 3 orders of magnitude, and the presence of dual hydrophobic tails and an anionic head appears to have the largest effect on the surface friction. Using internal reflection IR imaging, these studies show that structural and chemical features of FS are directly related to their ability to migrate to the F-A interface and self-assemble to form specific morphological features. While the anionic nature of FS allows for SDS migration to the F-A interface and the formation of stable domains across the surface, intermolecular cohesion of nonionic FS allows for the formation of rodlike structures due to inability to form mixed micelles with SDS. These studies also establish the relationship between surface morphologies, kinetic coefficient of friction, and structural features of surfactants in the complex environments.

  15. Crustal structure of northern Egypt from joint inversion of receiver functions and surface wave dispersion velocities

    Science.gov (United States)

    Badawy, Ahmed; Hegazi, Mona; Gaber, Hanan; Korrat, Ibrahim

    2018-01-01

    In this study, we used a combined inversion of body wave receiver functions and surface wave dispersion measurements to provide constraints on the crustal structure of northern Egypt. The two techniques are complementary to each other: receiver functions (RFs) are sensitive to shear-wave velocity contrasts, while surface wave dispersion (SWD) measurements are sensitive to finite variations of shear-wave velocity with depth. A database of 122 teleseismic events digitally recorded by the Egyptian National Seismological Network (ENSN) stations has been used as well. To enhance the resulting RFs at each ENSN station, the H-k stacking method was applied. A joint inversion process between the resulting receiver functions and the surface wave dispersion curves was applied as well. We have produced three averaged velocity structure models for distinct geographic and tectonic provinces namely Sinai, eastern desert, and western desert from east to the west respectively. These models will deeply help in estimation the epicenter distance of earthquake, focal mechanism solutions, and earthquake hazard analysis in northern Egypt. An obvious image of the subsurface structure has been determined which shows that generally the crustal structure of northern Egypt consists of three layers covered with a sequence of sediments that differs in thickness from across the region except in the Sharm area where the sedimentary cover is absent. The obtained results indicate that crustal thickness differs from east to west and reaches its maximum value of about 36 km at Siwa station (SWA) in the western desert and its minimum value of about 28 km at Sharm station (SHR) of the southern tip of the Sinai Peninsula. The Vp/Vs ratio varies between 1.71 and 2.07 in northern Egypt. Generally, the high values (1.93) of (Vp/Vs) at SWA station may reflect the well-known rich aquifer with fully saturated sediments of the Swia Oasis in the Western Desert. Moreover, the highest value (2.07) of (Vp/Vs) at

  16. Atomic layer deposition of highly dispersed Pt nanoparticles on a high surface area electrode backbone for electrochemical promotion of catalysis

    NARCIS (Netherlands)

    Hajar, Y.; di Palma, V.; Kyriakou, V.; Verheijen, M. A.; Baranova, E. A.; Vernoux, P.; Kessels, W. M. M.; Creatore, M.; van de Sanden, M. C. M.; Tsampas, M. N.

    2017-01-01

    A novel catalyst design for electrochemical promotion of catalysis (EPOC) is proposed which overcomes the main bottlenecks that limit EPOC commercialization, i.e., the low dispersion and small surface area of metal catalysts. We have increased the surface area by using a porous composite electrode

  17. A novel noninvasive surface ECG analysis using interlead QRS dispersion in arrhythmogenic right ventricular cardiomyopathy.

    Science.gov (United States)

    Hsieh, Wan-Hsin; Lin, Chin-Yu; Te, Abigail Louise D; Lo, Men-Tzung; Wu, Cheng-I; Chung, Fa-Po; Chang, Yi-Chung; Chang, Shih-Lin; Lin, Chen; Lo, Li-Wei; Hu, Yu-Feng; Liao, Jo-Nan; Chen, Yun-Yu; Jhuo, Shih-Jie; Raharjo, Sunu Budhi; Lin, Yenn-Jiang; Chen, Shih-Ann

    2017-01-01

    This study investigated the feasibility of using the precordial surface ECG lead interlead QRS dispersion (IQRSD) in the identification of abnormal ventricular substrate in arrhythmogenic right ventricular cardiomyopathy (ARVC). Seventy-one consecutive patients were enrolled and reclassified into 4 groups: definite ARVC with epicardial ablation (Group 1), ARVC with ventricular tachycardia (VT, Group 2), idiopathic right ventricular outflow tract VT without ARVC (Group 3), and controls without VT (Group 4). IQRSD was quantified by the angular difference between the reconstruction vectors obtained from the QRS-loop decomposition, based on a principal component analysis (PCA). Electroanatomic mapping and simulated ECGs were used to investigate the relationship between QRS dispersion and abnormal substrate. The percentage of the QRS loop area in the Group 1-2 was smaller than the controls (P = 0.01). The IQRSD between V1-V2 could differentiate all VTs from control (Psurface ECG precordial leads successfully differentiated ARVC from controls, and could be used as a noninvasive marker to identify the abnormal substrate and the status of ARVC patients who can benefit from epicardial ablation.

  18. Joint Inversion of Surface Waves Dispersion and Receiver Function at Cuba Seismic Stations

    International Nuclear Information System (INIS)

    Gonzalez, O'Leary; Moreno, Bladimir; Romanelli, Fabio; Panza, Giuliano F.

    2010-06-01

    Joint inversion of Rayleigh wave group velocity dispersion and receiver functions have been used to estimate the crust and upper mantle structure at eight seismic stations in Cuba. Receiver functions have been computed from teleseismic recordings of earthquakes at epicentral (angular) distances between 30 o and 90 o and Rayleigh wave group velocity dispersion have been taken from a surface-wave tomography study of the Caribbean area. The thickest crust (around 27 km) is found at Cascorro (CCC), Soroa (SOR), Moa (MOA) and Maisi (MAS) stations while the thinnest crust (around 18 km) is found at stations Rio Carpintero (RCC) and Guantanamo Bay (GTBY), in the southeastern of Cuba; this result is in agreement with the southward gradual thinning of the crust revealed by previous studies. The inversion shows a crystalline crust with S-wave velocity between 2.9 km/s and 3.9 km/s and at the crust-mantle transition zone the shear wave velocity varies from 3.9 km/s and 4.3 km/s. The lithospheric thickness varies from 74 km, in the youngest lithosphere, to 200 km in the middle of the Cuban island. Evidences of a subducted slab possibly belonging to the Caribbean plate are present below the stations Las Mercedes (LMG), RCC and GTBY and a thicker slab is present below the SOR station. (author)

  19. The dispersal and impact of salt from surface storage piles the Waste Isolation Pilot Plant

    International Nuclear Information System (INIS)

    Reith, C.C.; Louderbough, E.T.

    1986-01-01

    A comprehensive program of ecological studies occurs at the Waste Isolation Pilot Plant (WIPP) in an effort to detect and quantify impacts of excavated salt which is stored on the surface in two piles: one having originated in 1980, the other in 1984. Both piles are surrounded by berms which channel runoff to holding ponds, so nearly all dispersal is due to the resuspension, transport, and deposition of salt particles by wind. Ecological parameters which have been monitored since 1984 include: visual evidence (via photography), soil properties, microbial activity, leaf-litter decomposition, seedling emergence, plant foliar cover, and plant species diversity. These are periodically assessed at experimental plots near the salt piles, and at control plots several kilometers away

  20. Estimating sub-surface dispersed oil concentration using acoustic backscatter response.

    Science.gov (United States)

    Fuller, Christopher B; Bonner, James S; Islam, Mohammad S; Page, Cheryl; Ojo, Temitope; Kirkey, William

    2013-05-15

    The recent Deepwater Horizon disaster resulted in a dispersed oil plume at an approximate depth of 1000 m. Several methods were used to characterize this plume with respect to concentration and spatial extent including surface supported sampling and autonomous underwater vehicles with in situ instrument payloads. Additionally, echo sounders were used to track the plume location, demonstrating the potential for remote detection using acoustic backscatter (ABS). This study evaluated use of an Acoustic Doppler Current Profiler (ADCP) to quantitatively detect oil-droplet suspensions from the ABS response in a controlled laboratory setting. Results from this study showed log-linear ABS responses to oil-droplet volume concentration. However, the inability to reproduce ABS response factors suggests the difficultly in developing meaningful calibration factors for quantitative field analysis. Evaluation of theoretical ABS intensity derived from the particle size distribution provided insight regarding method sensitivity in the presence of interfering ambient particles. Copyright © 2013 Elsevier Ltd. All rights reserved.

  1. ARPES on Na0.6CoO2: Fermi surface and unusual band dispersion.

    Science.gov (United States)

    Yang, H-B; Wang, S-C; Sekharan, A K P; Matsui, H; Souma, S; Sato, T; Takahashi, T; Takeuchi, T; Campuzano, J C; Jin, R; Sales, B C; Mandrus, D; Wang, Z; Ding, H

    2004-06-18

    The electronic structure of single crystals Na0.6CoO2, which are closely related to the superconducting Na0.3CoO2.yH(2)O (T(c) approximately 5 K), is studied by angle-resolved photoelectron spectroscopy. While the measured Fermi surface (FS) is consistent with the large FS enclosing the Gamma point from the band theory, the predicted small FS pockets near the K points are absent. In addition, the band dispersion is found to be highly renormalized, and anisotropic along the two principal axes (Gamma-K, Gamma-M). Our measurements also indicate that an extended flatband is formed slightly above E(F) along Gamma-K.

  2. Surface structural, morphological, and catalytic studies of homogeneously dispersed anisotropic Ag nanostructures within mesoporous silica

    Energy Technology Data Exchange (ETDEWEB)

    Sareen, Shweta [Thapar University, School of Chemistry and Biochemistry (India); Mutreja, Vishal [Maharishi Markandeshwar University, Department of Chemistry (India); Pal, Bonamali; Singh, Satnam, E-mail: ssingh@thapar.edu [Thapar University, School of Chemistry and Biochemistry (India)

    2016-11-15

    Highly dispersed anisotropic Ag nanostructures were synthesized within the channels of 3-aminopropyltrimethoxysilane (APTMS)-modified mesoporous SBA-15 for catalyzing the reduction of p-dinitrobenzene, p-nitrophenol, and p-nitroacetophenone, respectively. A green templating process without involving any reducing agent, by varying the amount (1–10 wt.%) of Ag loading followed by calcination at 350 °C under H{sub 2} led to change in the morphology of Ag nanoparticles from nanospheres (~7–8 nm) to nanorods (aspect ratio ~12–30 nm) without any deformation in mesoporous sieves. In comparison to white bare SBA-15, gray-colored samples were formed with Ag impregnation exhibiting absorption bands at 484 and 840 nm indicating the formation of anisotropic Ag nanostructures within mesoporous matrix. TEM and FE-SEM micrographs confirmed the presence of evenly dispersed Ag nanostructures within as well as on the surface of mesoporous matrix. AFM studies indicated a small decrease in the average roughness of SBA-15 from 20.59 to 19.21 nm for 4 wt.% Ag/m-SBA-15, illustrating the encapsulation of majority of Ag nanoparticles in the siliceous matrix and presence of small amount of Ag nanoparticles on the mesoporous support. Moreover, due to plugging of mesopores with Ag, a significant decrease in surface area from 680 m{sup 2}/g of SBA-15 to 385 m{sup 2}/g was observed. The Ag-impregnated SBA-15 catalyst displayed superior catalytic activity than did bare SBA-15 with 4 wt.% Ag-loaded catalyst exhibiting optimum activity for selective reduction of p-nitrophenol to p-aminophenol (100 %), p-nitroacetophenone to p-aminoacetophenone (100 %), and p-dinitrobenzene to p-nitroaniline (87 %), with a small amount of p-phenylenediamine formation.

  3. Ray Tracing for Dispersive Tsunamis and Source Amplitude Estimation Based on Green's Law: Application to the 2015 Volcanic Tsunami Earthquake Near Torishima, South of Japan

    Science.gov (United States)

    Sandanbata, Osamu; Watada, Shingo; Satake, Kenji; Fukao, Yoshio; Sugioka, Hiroko; Ito, Aki; Shiobara, Hajime

    2017-12-01

    Ray tracing, which has been widely used for seismic waves, was also applied to tsunamis to examine the bathymetry effects during propagation, but it was limited to linear shallow-water waves. Green's law, which is based on the conservation of energy flux, has been used to estimate tsunami amplitude on ray paths. In this study, we first propose a new ray tracing method extended to dispersive tsunamis. By using an iterative algorithm to map two-dimensional tsunami velocity fields at different frequencies, ray paths at each frequency can be traced. We then show that Green's law is valid only outside the source region and that extension of Green's law is needed for source amplitude estimation. As an application example, we analyzed tsunami waves generated by an earthquake that occurred at a submarine volcano, Smith Caldera, near Torishima, Japan, in 2015. The ray-tracing results reveal that the ray paths are very dependent on its frequency, particularly at deep oceans. The validity of our frequency-dependent ray tracing is confirmed by the comparison of arrival angles and travel times with those of observed tsunami waveforms at an array of ocean bottom pressure gauges. The tsunami amplitude at the source is nearly twice or more of that just outside the source estimated from the array tsunami data by Green's law.

  4. Surface-Initiated Graft Atom Transfer Radical Polymerization of Methyl Methacrylate from Chitin Nanofiber Macroinitiator under Dispersion Conditions

    Directory of Open Access Journals (Sweden)

    Ryo Endo

    2015-08-01

    Full Text Available Surface-initiated graft atom transfer radical polymerization (ATRP of methyl methacrylate (MMA from self-assembled chitin nanofibers (CNFs was performed under dispersion conditions. Self-assembled CNFs were initially prepared by regeneration from a chitin ion gel with 1-allyl-3-methylimidazolium bromide using methanol; the product was then converted into the chitin nanofiber macroinitiator by reaction with α-bromoisobutyryl bromide in a dispersion containing N,N-dimethylformamide. Surface-initiated graft ATRP of MMA from the initiating sites on the CNFs was subsequently carried out under dispersion conditions, followed by filtration to obtain the CNF-graft-polyMMA film. Analysis of the product confirmed the occurrence of the graft ATRP on the surface of the CNFs.

  5. Electrostatic screening in classical Coulomb fluids: exponential or power-law decay or both? An investigation into the effect of dispersion interactions

    International Nuclear Information System (INIS)

    Kjellander, Roland

    2006-01-01

    It is shown that the nature of the non-electrostatic part of the pair interaction potential in classical Coulomb fluids can have a profound influence on the screening behaviour. Two cases are compared: (i) when the non-electrostatic part equals an arbitrary finite-ranged interaction and (ii) when a dispersion r -6 interaction potential is included. A formal analysis is done in exact statistical mechanics, including an investigation of the bridge function. It is found that the Coulombic r -1 and the dispersion r -6 potentials are coupled in a very intricate manner as regards the screening behaviour. The classical one-component plasma (OCP) is a particularly clear example due to its simplicity and is investigated in detail. When the dispersion r -6 potential is turned on, the screened electrostatic potential from a particle goes from a monotonic exponential decay, exp(-κr)/r, to a power-law decay, r -8 , for large r. The pair distribution function acquire, at the same time, an r -10 decay for large r instead of the exponential one. There still remains exponentially decaying contributions to both functions, but these contributions turn oscillatory when the r -6 interaction is switched on. When the Coulomb interaction is turned off but the dispersion r -6 pair potential is kept, the decay of the pair distribution function for large r goes over from the r -10 to an r -6 behaviour, which is the normal one for fluids of electroneutral particles with dispersion interactions. Differences and similarities compared to binary electrolytes are pointed out

  6. Development of a Constitutive Friction Law based on the Frictional Interaction of Rough Surfaces

    Directory of Open Access Journals (Sweden)

    F. Beyer

    2015-12-01

    Full Text Available Friction has a considerable impact in metal forming. This is in particular true for sheet-bulk metal-forming (SBMF in which local highly varying contact loads occur. A constitutive friction law suited to the needs of SBMF is necessary, if numerical investigations in SBMF are performed. The identification of the friction due to adhesion and ploughing is carried out with an elasto-plastic half-space model. The normal contact is verified for a broad range of normal loads. In addition, the model is used for the characterization of the occurring shear stress. Ploughing is determined by the work which is necessary to plastically deform the surface asperities of the new area that gets into contact during sliding. Furthermore, the surface patches of common half-space models are aligned orthogonally to the direction in which the surfaces approach when normal contact occurs. For a better reflection of the original surfaces, the element patches become inclined. This leads to a geometric share of lateral forces which also contribute to friction. Based on these effects, a friction law is derived which is able to predict the contact conditions especially for SBMF.

  7. Transport and dispersion of pollutants in surface impoundments: a finite element model

    International Nuclear Information System (INIS)

    Yeh, G.T.

    1980-07-01

    A surface impoundment model in finite element (SIMFE) is presented to enable the simulation of flow circulations and pollutant transport and dispersion in natural or artificial lakes, reservoirs or ponds with any number of islands. This surface impoundment model consists of two sub-models: hydrodynamic and pollutant transport models. Both submodels are simulated by the finite element method. While the hydrodynamic model is solved by the standard Galerkin finite element scheme, the pollutant transport model can be solved by any of the twelve optional finite element schemes built in the program. Theoretical approximations and the numerical algorithm of SIMFE are described. Detail instruction of the application are given and listing of FORTRAN IV source program are provided. Two sample problems are given. One is for an idealized system with a known solution to show the accuracy and partial validation of the models. The other is applied to Prairie Island for a set of hypothetical input data, typifying a class of problems to which SIMFE may be applied

  8. Transport and dispersion of pollutants in surface impoundments: a finite element model

    Energy Technology Data Exchange (ETDEWEB)

    Yeh, G.T.

    1980-07-01

    A surface impoundment model in finite element (SIMFE) is presented to enable the simulation of flow circulations and pollutant transport and dispersion in natural or artificial lakes, reservoirs or ponds with any number of islands. This surface impoundment model consists of two sub-models: hydrodynamic and pollutant transport models. Both submodels are simulated by the finite element method. While the hydrodynamic model is solved by the standard Galerkin finite element scheme, the pollutant transport model can be solved by any of the twelve optional finite element schemes built in the program. Theoretical approximations and the numerical algorithm of SIMFE are described. Detail instruction of the application are given and listing of FORTRAN IV source program are provided. Two sample problems are given. One is for an idealized system with a known solution to show the accuracy and partial validation of the models. The other is applied to Prairie Island for a set of hypothetical input data, typifying a class of problems to which SIMFE may be applied.

  9. Surface modification of magnetite nanoparticle with azobenzene-containing water dispersible polymer

    International Nuclear Information System (INIS)

    Theamdee, Pawinee; Traiphol, Rakchart; Rutnakornpituk, Boonjira; Wichai, Uthai; Rutnakornpituk, Metha

    2011-01-01

    We here report the synthesis of magnetite nanoparticle (MNP) grafted with poly (ethylene glycol) methyl ether methacrylate (PEGMA)-azobenzene acrylate (ABA) statistical copolymer via atom transfer radical polymerization (ATRP) for drug entrapment and photocontrolled release. MNP was synthesized via thermal decomposition of iron (III) acetylacetonate in benzyl alcohol and surface functionalized to obtain ATRP initiating sites. Molar compositions of the copolymer on MNP surface were systematically varied (100:0, 90:10, 70:30, and 50:50 of PEGMA:ABA, respectively) to obtain water dispersible particles with various amounts of azobenzene. The presence of polymeric shell on MNP core was evidenced by transmission electron microscopy (TEM). Drug loading and entrapment efficiencies as well as drug release behavior of the copolymer–MNP complexes were investigated. It was found that when percent of ABA in the copolymers was increased, entrapment and loading efficiencies of prednisolone model drug were enhanced. Releasing rate and percent of the released prednisolone of the complex exposed in UV light were slightly enhanced as compared to the system without UV irradiation. This copolymer–MNP complex with photocontrollable drug release and magnetic field-directed properties is warranted for further studies for potential uses as a novel drug delivery vehicle.

  10. Investigations on particle surface characteristics vs. dispersion behaviour of L-leucine coated carrier-free inhalable powders.

    Science.gov (United States)

    Raula, Janne; Thielmann, Frank; Naderi, Majid; Lehto, Vesa-Pekka; Kauppinen, Esko I

    2010-01-29

    Aerosol microparticles of salbutamol sulphate are gas-phase coated with an amino acid L-leucine. Depending of the saturated state of L-leucine, the coating is formed by the surface diffusion of L-leucine molecules within a droplet or by the physical vapour deposition (PVD) of L-leucine or by the combination thereof. The PVD coated particles showed excellent aerosolization characteristics in a carrier-free powder delivery from an inhaler. The aerosolization of the fine powders is compared with surface energy parameters analysed by inverse gas chromatography (IGC). The dispersion testing is conducted by a Inhalation Simulator using a fast inhalation profile with inhalation flow rate of 67 l min(-1). It is found that the powder emission is affected by the morphology, surface roughness (asperity size and density) of the particles and acidity of particle surface. The latter affects the dispersion and dose repeatability of fine powder in a case if L-leucine content is high enough. However, there is no direct correlation between dispersive surface energies and aerosolization performances of the powders. Crucial factors for the improved aerosolization rely weakly on surface acid-base properties but strongly on particle morphology and fine-scale surface roughness. 2009 Elsevier B.V. All rights reserved.

  11. First-order dissolution rate law and the role of surface layers in glass performance assessment

    Science.gov (United States)

    Grambow, B.; Müller, R.

    2001-09-01

    The first-order dissolution rate law is used for nuclear waste glass performance predictions since 1984. A first discussion of the role of saturation effects was initiated at the MRS conference that year. In paper (1) it was stated that "For glass dissolution A* (the reaction affinity) cannot become zero since saturation only involves the reacting surface while soluble elements still might be extracted from the glass" [B. Grambow, J. Mater. Res. Soc. Symp. Proc. 44 (1985) 15]. Saturation of silica at the surface and condensation of surface silanol groups was considered as being responsible for the slow down of reaction rates by as much as a factor of 1000. Precipitation of Si containing secondary phases such as quartz was invoked as a mechanism for keeping final dissolution affinities higher than zero. Another (2) paper [A.B. Barkatt, P.B. Macedo, B.C. Gibson, C.J. Montrose, J. Mater. Res. Soc. Symp. Proc. 44 (1985) 3] stated that "… under repository conditions the extent of glass dissolution will be moderate due to saturation with respect to certain major elements (in particular, Si, Al and Ca). Consequently, the concentration levels of the more soluble glass constituents in the aqueous medium are expected to fall appreciable below their solubility limit." The formation of dense surface layers was considered responsible for explaining the saturation effect. The mathematical model assumed stop of reaction in closed systems, once solubility limits were achieved. For more than 15 years the question of the correctness of one or the other concept has seldom been posed and has not yet been resolved. The need of repository performance assessment for validated rate laws demands a solution, particularly since the consequences of the two concepts and research requirements for the long-term glass behavior are quite different. In concept (1) the stability of the `equilibrium surface region' is not relevant because, by definition, this region is stable chemically and after a

  12. Control of flying flexible aircraft using control surfaces and dispersed piezoelectric actuators

    Science.gov (United States)

    Tuzcu, Ilhan; Meirovitch, Leonard

    2006-08-01

    The flight of relatively stiff aircraft can be adequately controlled by standard means, i.e., by the engine throttles and control surfaces. When the flexibility becomes a factor, the standard controls may not be sufficient. In several earlier papers, the authors have addressed the problem of dynamics and control of maneuvering flexible aircraft. Using a perturbation approach they separated the problem into a quasi-rigid flight dynamics problem for the flight variables, which tend to be large, and an extended perturbation problem for the perturbations in the flight variables and the elastic vibration, which tend to be small, where the second problem receives input from the first. It was suggested in the earlier papers that, in addition to the standard controls, the controls for the extended perturbation problem include actuators whose task is to control the vibration. In this paper, the possibility of controlling the vibration by means of piezoelectric actuators dispersed over the flexible structural components, and in particular over the wing and empennage, is explored. It is concluded that piezoelectric actuators can be effective in damping out vibration if adequate power sources can be provided. This is the first time that the feasibility of piezoelectric actuators has been investigated in a flight environment.

  13. Spatially resolved quantification of agrochemicals on plant surfaces using energy dispersive X-ray microanalysis.

    Science.gov (United States)

    Hunsche, Mauricio; Noga, Georg

    2009-12-01

    In the present study the principle of energy dispersive X-ray microanalysis (EDX), i.e. the detection of elements based on their characteristic X-rays, was used to localise and quantify organic and inorganic pesticides on enzymatically isolated fruit cuticles. Pesticides could be discriminated from the plant surface because of their distinctive elemental composition. Findings confirm the close relation between net intensity (NI) and area covered by the active ingredient (AI area). Using wide and narrow concentration ranges of glyphosate and glufosinate, respectively, results showed that quantification of AI requires the selection of appropriate regression equations while considering NI, peak-to-background (P/B) ratio, and AI area. The use of selected internal standards (ISs) such as Ca(NO(3))(2) improved the accuracy of the quantification slightly but led to the formation of particular, non-typical microstructured deposits. The suitability of SEM-EDX as a general technique to quantify pesticides was evaluated additionally on 14 agrochemicals applied at diluted or regular concentration. Among the pesticides tested, spatial localisation and quantification of AI amount could be done for inorganic copper and sulfur as well for the organic agrochemicals glyphosate, glufosinate, bromoxynil and mancozeb. (c) 2009 Society of Chemical Industry.

  14. Surface chemical compositions and dispersity of starch nanocrystals formed by sulfuric and hydrochloric acid hydrolysis.

    Science.gov (United States)

    Wei, Benxi; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2014-01-01

    Surface chemical compositions of starch nanocrystals (SNC) prepared using sulfuric acid (H2SO4) and hydrochloric acid (HCl) hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS) and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were -23.1 and -5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to -32.3 and -10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to -24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample.

  15. Surface chemical compositions and dispersity of starch nanocrystals formed by sulfuric and hydrochloric acid hydrolysis.

    Directory of Open Access Journals (Sweden)

    Benxi Wei

    Full Text Available Surface chemical compositions of starch nanocrystals (SNC prepared using sulfuric acid (H2SO4 and hydrochloric acid (HCl hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were -23.1 and -5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to -32.3 and -10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to -24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample.

  16. Refractive index dispersion of swift heavy ion irradiated BFO thin films using Surface Plasmon Resonance technique

    Science.gov (United States)

    Paliwal, Ayushi; Sharma, Savita; Tomar, Monika; Singh, Fouran; Gupta, Vinay

    2016-07-01

    Swift heavy ion irradiation (SHI) is an effective technique to induce defects for possible modifications in the material properties. There is growing interest in studying the optical properties of multiferroic BiFeO3 (BFO) thin films for optoelectronic applications. In the present work, BFO thin films were prepared by sol-gel spin coating technique and were irradiated using the 15 UD Pelletron accelerator with 100 MeV Au9+ ions at a fluence of 1 × 1012 ions cm-2. The as-grown films became rough and porous on ion irradiation. Surface Plasmon Resonance (SPR) technique has been identified as a highly sensitive and powerful technique for studying the optical properties of a dielectric material. Optical properties of BFO thin films, before and after irradiation were studied using SPR technique in Otto configuration. Refractive index is found to be decreasing from 2.27 to 2.14 on ion irradiation at a wavelength of 633 nm. Refractive index dispersion of BFO thin film (from 405 nm to 633 nm) before and after ion radiation was examined.

  17. Surface Chemical Compositions and Dispersity of Starch Nanocrystals Formed by Sulfuric and Hydrochloric Acid Hydrolysis

    Science.gov (United States)

    Wei, Benxi; Xu, Xueming; Jin, Zhengyu; Tian, Yaoqi

    2014-01-01

    Surface chemical compositions of starch nanocrystals (SNC) prepared using sulfuric acid (H2SO4) and hydrochloric acid (HCl) hydrolysis were analyzed by X-ray photoelectron spectroscopy (XPS) and FT-IR. The results showed that carboxyl groups and sulfate esters were presented in SNC after hydrolysis with H2SO4, while no sulfate esters were detected in SNC during HCl-hydrolysis. TEM results showed that, compared to H2SO4-hydrolyzed sample, a wider size distribution of SNC prepared by HCl-hydrolysis were observed. Zeta-potentials were −23.1 and −5.02 mV for H2SO4- and HCl-hydrolyzed SNC suspensions at pH 6.5, respectively. Nevertheless, the zeta-potential values decreased to −32.3 and −10.2 mV as the dispersion pH was adjusted to 10.6. After placed 48 h at pH 10.6, zeta-potential increased to −24.1 mV for H2SO4-hydrolyzed SNC, while no change was detected for HCl-hydrolyzed one. The higher zeta-potential and relative small particle distribution of SNC caused more stable suspensions compared to HCl-hydrolyzed sample. PMID:24586246

  18. Determining the near-surface current profile from measurements of the wave dispersion relation

    Science.gov (United States)

    Smeltzer, Benjamin; Maxwell, Peter; Aesøy, Eirik; Ellingsen, Simen

    2017-11-01

    The current-induced Doppler shifts of waves can yield information about the background mean flow, providing an attractive method of inferring the current profile in the upper layer of the ocean. We present measurements of waves propagating on shear currents in a laboratory water channel, as well as theoretical investigations of inversion techniques for determining the vertical current structure. Spatial and temporal measurements of the free surface profile obtained using a synthetic Schlieren method are analyzed to determine the wave dispersion relation and Doppler shifts as a function of wavelength. The vertical current profile can then be inferred from the Doppler shifts using an inversion algorithm. Most existing algorithms rely on a priori assumptions of the shape of the current profile, and developing a method that uses less stringent assumptions is a focus of this study, allowing for measurement of more general current profiles. The accuracy of current inversion algorithms are evaluated by comparison to measurements of the mean flow profile from particle image velocimetry (PIV), and a discussion of the sensitivity to errors in the Doppler shifts is presented.

  19. Measurement of surface phonon dispersion relations for LiF, NaF, and KCl through energy-analysed inelastic scattering of a helium atomic beam

    International Nuclear Information System (INIS)

    Doak, R.B.

    1981-01-01

    A crystal surface terminates abruptly one dimension of lattice periodicity, constituting a lattice defect with concomitant localized modes of vibration, termed surface phonons. Such surface phonons have previously been investigated in the long wavelength, non-dispersive regime. The present work reports the first observation of surface phonons in the short wavelength, dispersive range. The data allow for the first time a surface phonon dispersion curve to be plotted completely from origin to edge of the surface Brillouin zone. Measurements were made of phonons along the (anti GAMMA anti M) and (anti GAMMA anti X) azimuths of the LiF(001) surface and along the azimuth of NaF(001) and KC1(001) surfaces. The results are in substantial agreement with theoretical predictions, although for LiF the measured Rayleigh dispersion curve at M lies appreciably below the theoretical value, possibly reflecting the effects of surface relaxation. (orig.)

  20. Petroleum-collecting and dispersing complexes based on oleic acid and nitrogenous compounds as surface-active agents for removing thin petroleum films from water surface.

    Science.gov (United States)

    Asadov, Ziyafaddin H; Tantawy, Ahmed H; Zarbaliyeva, Ilhama A; Rahimov, Ravan A

    2012-01-01

    Petroleum-collecting and dispersing complexes were synthesized on the basis of oleic acid and nitrogen-containing compounds. Surface-active properties (interfacial tension) of the obtained complexes were investigated by stalagmometric method. Petroleum-collecting and dispersing properties of the oleic acid complexes in diluted (5% wt. water or alcoholic solution) and undiluted form have been studied in waters of varying salinity (distilled, fresh and sea waters). Some of physico-chemical indices of the prepared compounds such as solubility, acid and amine numbers as well as electrical conductivity have been determined. The ability of oleic acid complex with ethylenediamine as petro-collecting and dispersing agent towards different types of petroleum has been studied. The influence of thickness and "age" of the petroleum slick on collecting and dispersing capacity of this complex has been clarified. Surface properties studied included critical micelle concentration (CMC), maximum surface excess (Γ(max)), and minimum surface area (A(min)). Free energies of micellization (ΔG°(mic)) and adsorption (ΔG°(ads)) were calculated.

  1. Fabrication of Water Jet Resistant and Thermally Stable Superhydrophobic Surfaces by Spray Coating of Candle Soot Dispersion.

    Science.gov (United States)

    Qahtan, Talal F; Gondal, Mohammed A; Alade, Ibrahim O; Dastageer, Mohammed A

    2017-08-08

    A facile synthesis method for highly stable carbon nanoparticle (CNP) dispersion in acetone by incomplete combustion of paraffin candle flame is presented. The synthesized CNP dispersion is the mixture of graphitic and amorphous carbon nanoparticles of the size range of 20-50 nm and manifested the mesoporosity with an average pore size of 7 nm and a BET surface area of 366 m 2 g -1 . As an application of this material, the carbon nanoparticle dispersion was spray coated (spray-based coating) on a glass surface to fabricate superhydrophobic (water contact angle > 150° and sliding angle fabricated from direct candle flame soot deposition (candle-based coating). This study proved that water jet resistant and thermally stable superhydrophobic surfaces can be easily fabricated by simple spray coating of CNP dispersion gathered from incomplete combustion of paraffin candle flame and this technique can be used for different applications with the potential for the large scale fabrication.

  2. Seismic velocity site characterization of 10 Arizona strong-motion recording stations by spectral analysis of surface wave dispersion

    Science.gov (United States)

    Kayen, Robert E.; Carkin, Brad A.; Corbett, Skye C.

    2017-10-19

    Vertical one-dimensional shear wave velocity (VS) profiles are presented for strong-motion sites in Arizona for a suite of stations surrounding the Palo Verde Nuclear Generating Station. The purpose of the study is to determine the detailed site velocity profile, the average velocity in the upper 30 meters of the profile (VS30), the average velocity for the entire profile (VSZ), and the National Earthquake Hazards Reduction Program (NEHRP) site classification. The VS profiles are estimated using a non-invasive continuous-sine-wave method for gathering the dispersion characteristics of surface waves. Shear wave velocity profiles were inverted from the averaged dispersion curves using three independent methods for comparison, and the root-mean-square combined coefficient of variation (COV) of the dispersion and inversion calculations are estimated for each site.

  3. Nonlinear Schrödinger equations with spatio-temporal dispersion in Kerr, parabolic, power and dual power law media: A novel extended Kudryashov’s algorithm and soliton solutions

    Directory of Open Access Journals (Sweden)

    Yakup Yıldırım

    Full Text Available In this study, we perform the extended Kudryashov method to nonlinear Schrödinger equation (NLSE with spatio-temporal dispersion that arises in a propagation of light in nonlinear optical fibers, planar waveguides, Bose–Einstein condensate theory. Four types of nonlinearity – Kerr law, power law, parabolic law and dual-power law – are being considered for the model. By using this scheme, the topological, singular soliton and rational solutions are obtained. In addition, some graphical simulations of solutions are provided.It is demonstrated that the proposed algorithm is effective and can be handled for many other nonlinear complex differential equations. Keywords: Solitons, Nonlinear Schrödinger equation with spatio-temporal dispersion, Extended Kudryashov’s method

  4. Thallium dispersal and contamination in surface sediments from South China and its source identification.

    Science.gov (United States)

    Liu, Juan; Wang, Jin; Chen, Yongheng; Shen, Chuan-Chou; Jiang, Xiuyang; Xie, Xiaofan; Chen, Diyun; Lippold, Holger; Wang, Chunlin

    2016-06-01

    Thallium (Tl) is a non-essential element in humans and it is considered to be highly toxic. In this study, the contents, sources, and dispersal of Tl were investigated in surface sediments from a riverine system (the western Pearl River Basin, China), whose catchment has been contaminated by mining and roasting of Tl-bearing pyrite ores. The isotopic composition of Pb and total contents of Tl and other relevant metals (Pb, Zn, Cd, Co, and Ni) were measured in the pyrite ores, mining and roasting wastes, and the river sediments. Widespread contamination of Tl was observed in the sediments across the river, with the highest concentration of Tl (17.3 mg/kg) measured 4 km downstream from the pyrite industrial site. Application of a modified Institute for Reference Materials and Measurement (IRMM) sequential extraction scheme in representative sediments unveiled that 60-90% of Tl and Pb were present in the residual fraction of the sediments. The sediments contained generally lower (206)Pb/(207)Pb and higher (208)Pb/(206)Pb ratios compared with the natural Pb isotope signature (1.2008 and 2.0766 for (206)Pb/(207)Pb and (208)Pb/(206)Pb, respectively). These results suggested that a significant fraction of non-indigenous Pb could be attributed to the mining and roasting activities of pyrite ores, with low (206)Pb/(207)Pb (1.1539) and high (208)Pb/(206)Pb (2.1263). Results also showed that approximately 6-88% of Tl contamination in the sediments originated from the pyrite mining and roasting activities. This study highlights that Pb isotopic compositions could be used for quantitatively fingerprinting the sources of Tl contamination in sediments. Copyright © 2016 Elsevier Ltd. All rights reserved.

  5. Northern Korean Peninsula 1-D velocity model from surface wave dispersion and full-waveform data

    Science.gov (United States)

    Lee, S. J.; Rhie, J.; Kim, S.; Kang, T. S.; Cho, C.

    2016-12-01

    Monitoring seismic activities in the northern Korean Peninsula is important not only for understanding the characteristics of earthquakes but also for watching nuclear tests. To better monitor those natural and man-made seismic activities, reliable seismic velocity models are required. However, the seismic velocity structure of the region is not known well due to the lack of available seismic data directly measured in the region. This study presents 1-D velocity models of the region using two different datasets comprised of two-year-long continuous waveform and the 2013 North Korea nuclear test event waveform recorded at stations surrounding the region. Two reference 1-D models for the inland and offshore areas (Western East Sea) were estimated by 1-D inversion of surface wave dispersion measurements from ambient noise cross-correlations of the continuous waveform. To investigate the variations in the velocity models, many 1-D models for the paths between the 2013 nuclear test site and stations in China and South Korea were constructed by forward waveform modeling. The velocity variations are not significant for both models representing the inland and offshore paths, respectively. The 1-D models for the inland paths are similar to the models constructed for the southern Korean Peninsula. Interestingly, waveforms sampling through the offshore paths are not well explained by simple 1-D isotropic models. The preliminary result indicates that there exists radial anisotropy with SH being faster than SV by 3-5% in the upper mantle beneath the offshore northern Korean Peninsula, although further studies are necessary to explain the origin of anisotropy. A proper characterization of propagation effects along the offshore paths would be useful for monitoring future nuclear tests because many seismic stations in the eastern South Korea record waveforms sampling the offshore region from the nuclear test site to those stations.

  6. Nanoparticle dispersion effect of laser-surface melting in ZrB{sub 2p}/6061Al composites

    Energy Technology Data Exchange (ETDEWEB)

    Zeng, Yida; Chao, Yuhjin; Luo, Zhen, E-mail: lz-tju@163.com [Tianjin University, School of Material Science and Engineering (China); Huang, Yongxian [State Key Laboratory of Advanced Welding and Joining, Harbin Institute of Technology (China)

    2017-04-15

    Zirconium diboride (ZrB{sub 2p}, 15 vol%)/6061 aluminum (Al) composites were fabricated via in situ reaction. The existence, morphologies, and dispersion degree of the in situ ZrB{sub 2} particles with size from tens to hundreds of nanometers were studied by X-ray diffractometry, energy-dispersive X-ray spectroscopy, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy. As the particle-settlement effect becomes dominant during the composite fabrication process, ZrB{sub 2} nanoparticles agglomerate to a certain extent in some areas of the as-cast composites. A laser-surface melting (LSM) strategy was applied to disperse agglomerated ZrB{sub 2} nanoparticles in as-cast composites, and the ZrB{sub 2} nanoparticle dispersion is affected visibly by LSM. After LSM, nanoparticles tend to distribute along the grain boundary. Particle clusters were dispersed in an explosive orientation and the particle diffusion distance varied in terms of its radius and melt-viscosity vicinity. High-resolution transmission electron microscopy showed the existence of a subgrain structure near the ZrB{sub 2}–Al interface after LSM. This may increase the yield strength when a dislocation tangle forms.

  7. Nanoparticle dispersion effect of laser-surface melting in ZrB2p/6061Al composites

    International Nuclear Information System (INIS)

    Zeng, Yida; Chao, Yuhjin; Luo, Zhen; Huang, Yongxian

    2017-01-01

    Zirconium diboride (ZrB 2p , 15 vol%)/6061 aluminum (Al) composites were fabricated via in situ reaction. The existence, morphologies, and dispersion degree of the in situ ZrB 2 particles with size from tens to hundreds of nanometers were studied by X-ray diffractometry, energy-dispersive X-ray spectroscopy, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy. As the particle-settlement effect becomes dominant during the composite fabrication process, ZrB 2 nanoparticles agglomerate to a certain extent in some areas of the as-cast composites. A laser-surface melting (LSM) strategy was applied to disperse agglomerated ZrB 2 nanoparticles in as-cast composites, and the ZrB 2 nanoparticle dispersion is affected visibly by LSM. After LSM, nanoparticles tend to distribute along the grain boundary. Particle clusters were dispersed in an explosive orientation and the particle diffusion distance varied in terms of its radius and melt-viscosity vicinity. High-resolution transmission electron microscopy showed the existence of a subgrain structure near the ZrB 2 –Al interface after LSM. This may increase the yield strength when a dislocation tangle forms.

  8. Direct generation of titanium dioxide nanoparticles dispersion under supercritical conditions for photocatalytic active thermoplastic surfaces for microbiological inactivation

    International Nuclear Information System (INIS)

    Zydziak, Nicolas; Zanin, Maria-Helena Ambrosio; Trick, Iris; Hübner, Christof

    2015-01-01

    Thermoplastic poly(propylene) (PP) and acrylonitrile-butadiene-styrene (ABS) surfaces were coated with silica based films via the sol–gel process, containing titanium dioxide (TiO 2 ) as photocatalyst. TiO 2 was previously synthesized via sol–gel and treated under supercritical conditions in water dispersions. The characterization of the TiO 2 dispersions was performed via disc centrifuge to determine the particle size and via Raman spectroscopy and X-Ray Diffraction (XRD) to characterize the crystallinity of TiO 2 . The synthesized TiO 2 dispersions and commercially available TiO 2 particles were incorporated in silica based films which were synthesized under acidic or basic conditions, leading to dense or porous films respectively. The morphology of the films was characterized via Scanning Electron Microscopy (SEM). The incorporation of synthesized TiO 2 in the coating led to photocatalytically more active thermoplastic surfaces than films formulated with commercially available TiO 2 as determined via dye discoloration test. A microbiological test performed with Sarcina lutea confirmed this result and showed an inactivation factor of 6 (99.9999%) after 24 h UV irradiation, for synthesized TiO 2 incorporated in acidic formulated silica layer on ABS surfaces. - Highlights: • We report about photocatalytic layers formulated on thermoplastic surfaces. • We synthesized silica layer and TiO 2 via sol–gel and supercritical treatment. • Amorphous, crystalline and commercial dispersions were generated and characterized. • The morphology of dense and porous photocatalytic layers is observed via SEM. • Discoloration and microbiological tests correlate activity and surface morphology

  9. Dispersion Forces

    CERN Document Server

    Buhmann, Stefan Yoshi

    2012-01-01

    In this book, a modern unified theory of dispersion forces on atoms and bodies is presented which covers a broad range of advanced aspects and scenarios. Macroscopic quantum electrodynamics is shown to provide a powerful framework for dispersion forces which allows for discussing general properties like their non-additivity and the relation between microscopic and macroscopic interactions. It is demonstrated how the general results can be used to obtain dispersion forces on atoms in the presence of bodies of various shapes and materials. Starting with a brief recapitulation of volume I, this volume II deals especially with bodies of irregular shapes, universal scaling laws, dynamical forces on excited atoms, enhanced forces in cavity quantum electrodynamics, non-equilibrium forces in thermal environments and quantum friction. The book gives both the specialist and those new to the field a thorough overview over recent results in the field. It provides a toolbox for studying dispersion forces in various contex...

  10. Modelling surface radioactive spill dispersion in the Alborán Sea.

    Science.gov (United States)

    Periáñez, R

    2006-01-01

    The Strait of Gibraltar and the Alborán Sea are the only connection between the Atlantic Ocean and the Mediterranean Sea. Intense shipping activities occur in the area, including transport of waste radionuclides and transit of nuclear submarines. Thus, it is relevant to have a dispersion model that can be used in an emergency situation after an accident, to help the decision-making process. Such dispersion model requires an appropriate description of the physical oceanography of the region of interest, with simulations of tides and residual (average) circulation. In this work, a particle-tracking dispersion model that can be used to simulate the dispersion of radionuclides in the system Strait of Gibraltar-Alborán Sea is described. Tides are simulated using a barotropic model and for the average circulation a reduced-gravity model is applied. This model is able to reproduce the main features of the Alborán circulation (the well known Western Alborán Gyre, WAG, and the coastal circulation mode). The dispersion model is run off-line, using previously computed tidal and residual currents. The contamination patch is simulated by a number of particles whose individual paths are computed; diffusion and decay being modelled using a Monte Carlo method. Radionuclide concentrations may be obtained from the density of particles per water volume unit. Results from the hydrodynamic models have been compared with observations in the area. Several examples of dispersion computations under different wind and circulation conditions are presented.

  11. Unified first law and some general prescription. A redefinition of surface gravity

    Energy Technology Data Exchange (ETDEWEB)

    Haldar, Sourav; Bhattacharjee, Sudipto; Chakraborty, Subenoy [Jadavpur University, Department of Mathematics, Kolkata, West Bengal (India)

    2017-09-15

    The paper contains an extensive study of the unified first law (UFL) in the Friedmann-Robertson-Walker spacetime model. By projecting the UFL along the Kodama vector the second Friedmann equation can be obtained. Also studying the UFL on the event horizon it is found that the Clausius relation cannot be obtained from the UFL by projecting it along the tangent to the event horizon as it can be for the trapping horizon. However, it is shown in the present work that Clausius relation can be obtained by projecting the UFL along the Kodama vector on the horizon and the result is found to be true for any horizon. Finally motivated by the Unruh temperature for the Rindler observer, surface gravity is redefined and a Clausius relation is obtained from the UFL by projecting it along a vector analogous to the Kodama vector. (orig.)

  12. Surface grafting of epoxy polymer on CB to improve its dispersion to be the filler of resistive ink for PCB

    Science.gov (United States)

    Zhou, Guoyun; Xu, Xiaolan; Wang, Shouxu; He, Xuemei; He, Wei; Su, Xinhong; Wong, Ching Ping

    In this paper, we report a novel and efficient method of promoting the dispersing uniformity of carbon black (CB) in epoxy polymer substrate of PCB (printed circuit board) by chemical grafting. The reported method shows the promising capability in the application of advanced printable resistor ink. By taking advantage of the functionalized CB surfaces, the grafting reaction of epoxy polymer on CB particles was investigated with Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscope (TEM) and thermo gravimetric analysis (TGA). FT-IR spectra evidenced the polymerization of epoxy resin with coupling agent and TEM investigation directly confirmed the polymerization occurred on CB surface. The polymerization occurred on the limited part of the CB surfaces to form a network-structure polymer to reside on the CB particles and hence greatly improved CB dispersion in ink as evidenced in ink-droplet spreading verification on glass and PCB resin substrates. On the other hand, the polymer grafting has limited effect on the increasing of the as-cured ink filled with the grafted CBs. Finally, the cross-section observation also confirmed the dispersion improvement and sheet resistance uniformity due to epoxy polymer grafting on PCB substrate, indicating the prospective candidate as embedded resistors for PCB.

  13. Surface grafting of epoxy polymer on CB to improve its dispersion to be the filler of resistive ink for PCB

    Directory of Open Access Journals (Sweden)

    Guoyun Zhou

    Full Text Available In this paper, we report a novel and efficient method of promoting the dispersing uniformity of carbon black (CB in epoxy polymer substrate of PCB (printed circuit board by chemical grafting. The reported method shows the promising capability in the application of advanced printable resistor ink. By taking advantage of the functionalized CB surfaces, the grafting reaction of epoxy polymer on CB particles was investigated with Fourier-transform infrared spectroscopy (FT-IR, transmission electron microscope (TEM and thermo gravimetric analysis (TGA. FT-IR spectra evidenced the polymerization of epoxy resin with coupling agent and TEM investigation directly confirmed the polymerization occurred on CB surface. The polymerization occurred on the limited part of the CB surfaces to form a network-structure polymer to reside on the CB particles and hence greatly improved CB dispersion in ink as evidenced in ink-droplet spreading verification on glass and PCB resin substrates. On the other hand, the polymer grafting has limited effect on the increasing of the as-cured ink filled with the grafted CBs. Finally, the cross-section observation also confirmed the dispersion improvement and sheet resistance uniformity due to epoxy polymer grafting on PCB substrate, indicating the prospective candidate as embedded resistors for PCB. Keywords: Grafting, Carbon black (CB, Epoxy polymer, Resistive ink, Printed circuit board (PCB

  14. Surface properties and physiology of Ulmus laevis and U. minor samaras: implications for seed development and dispersal.

    Science.gov (United States)

    Guzmán-Delgado, Paula; Fernández, Victoria; Venturas, Martin; Rodríguez-Calcerrada, Jesús; Gil, Luis

    2017-06-01

    Plant surface properties influence solid-liquid interactions and matter exchange between the organs and their surrounding environment. In the case of fruits, surface processes may be of relevance for seed production and dispersal. To gain insight into the relationship between surface structure, chemical composition and function of aerial reproductive organs, we performed diverse experiments with the dry, winged fruits, or samaras, of Ulmus laevis Pall. and Ulmus minor Mill. both at the time of full maturity (green samaras) and of samara dispersal (dry samaras). Samaras of both elm species showed positive photosynthetic rates and absorbed water through their epidermal surfaces. The surface wettability, free energy, polarity and solubility parameter were lower in U. laevis than in U. minor and decreased for dry samaras in both species. Ulmus laevis samaras had a high degree of surface nano-roughness mainly conferred by cell wall folds containing pectins that substantially increased after hydration. The samaras in this species also had a thicker cuticle that could be isolated by enzymatic digestion, whereas that of U. minor samaras had higher amounts of soluble lipids. Dry samaras of U. laevis had higher floatability and lower air sustentation than those of U. minor. We concluded that samaras contribute to seed development by participating in carbon and water exchange. This may be especially important for U. minor, whose samaras develop before leaf emergence. The trichomes present along U. laevis samara margin may enhance water absorption and samara floatability even in turbulent waters. In general, U. minor samaras show traits that are consistent with a more drought tolerant character than U. laevis samaras, in line with the resources available both at the tree and ecosystem level for these species. Samara features may additionally reflect different adaptive strategies for seed dispersal and niche differentiation between species, by favoring hydrochory for U. laevis

  15. Effectiveness of selected dispersants on magnetite deposition at simulated PWR heat-transfer surfaces

    International Nuclear Information System (INIS)

    Burgmayer, P.; Crovetto, R.; Turner, C.; Klimas, S.J.

    1999-07-01

    The effectiveness of 3 different dispersants-a polyphosphonic acid (PIPPA), a polymethacrylic acid (PMA), and a hydroxyethylidene methacrylic acid (HEME)-at controlling magnetite deposition was examined under steam generator operating conditions. Tests in a cycling research model boiler showed that the dispersants resulted in corrosion products of a smaller average size and a bimodal size distribution. At a concentration in the boiler of 10 mg/kg, density weight deposit on heated probes was reduced 4-, 3-, and 2-fold for PMA, PIPPA, and HEME, respectively. PIPPA was the most effective at increasing iron transport out of the boiler. In deposition loop tests using an 59 Fe radiotracer, only PIPPA and HEME were effective at reducing the particle deposition rate under flow-boiling conditions. None of the dispersants had any effect on deposition under single-phase forced-convective flow. (author)

  16. Effectiveness of selected dispersants on magnetite deposition at simulated PWR heat transfer surfaces

    International Nuclear Information System (INIS)

    Burgmayer, P.; Crovetto, R.; Turner, C.; Klimas, S.

    1998-01-01

    The effectiveness of three different dispersants - a polyphosphonic acid (PIPPA); a polymethacrylic acid (PMA); and a hydroxyethylidene methacrylic acid (HEME) - at controlling magnetite deposition has been examined under steam generator operating conditions. Tests in a cycling research model boiler showed that the dispersants resulted in corrosion products with a smaller average size and a bimodal size distribution. At a concentration in the boiler of 10 mg/kg, density weight deposit on heated probes was reduced 4-, 3-, and 2-fold for PMA, PIPPA, and HEME, respectively. PIPPA was the most effective at increasing iron transport out of the boiler. In deposition loop tests using a 59-Fe radiotracer, only PIPPA and HEME were effective at reducing the particle deposition rate under flow-boiling conditions. None of the dispersants had any impact on deposition under single-phase forced-convective flow. (author)

  17. Molecular surface area based predictive models for the adsorption and diffusion of disperse dyes in polylactic acid matrix.

    Science.gov (United States)

    Xu, Suxin; Chen, Jiangang; Wang, Bijia; Yang, Yiqi

    2015-11-15

    Two predictive models were presented for the adsorption affinities and diffusion coefficients of disperse dyes in polylactic acid matrix. Quantitative structure-sorption behavior relationship would not only provide insights into sorption process, but also enable rational engineering for desired properties. The thermodynamic and kinetic parameters for three disperse dyes were measured. The predictive model for adsorption affinity was based on two linear relationships derived by interpreting the experimental measurements with molecular structural parameters and compensation effect: ΔH° vs. dye size and ΔS° vs. ΔH°. Similarly, the predictive model for diffusion coefficient was based on two derived linear relationships: activation energy of diffusion vs. dye size and logarithm of pre-exponential factor vs. activation energy of diffusion. The only required parameters for both models are temperature and solvent accessible surface area of the dye molecule. These two predictive models were validated by testing the adsorption and diffusion properties of new disperse dyes. The models offer fairly good predictive ability. The linkage between structural parameter of disperse dyes and sorption behaviors might be generalized and extended to other similar polymer-penetrant systems. Copyright © 2015 Elsevier Inc. All rights reserved.

  18. Dispersion Energy Analysis of Rayleigh and Love Waves in the Presence of Low-Velocity Layers in Near-Surface Seismic Surveys

    Science.gov (United States)

    Mi, Binbin; Xia, Jianghai; Shen, Chao; Wang, Limin

    2017-10-01

    High-frequency surface-wave analysis methods have been effectively and widely used to determine near-surface shear (S) wave velocity. To image the dispersion energy and identify different dispersive modes of surface waves accurately is one of key steps of using surface-wave methods. We analyzed the dispersion energy characteristics of Rayleigh and Love waves in near-surface layered models based on numerical simulations. It has been found that if there is a low-velocity layer (LVL) in the half-space, the dispersion energy of Rayleigh or Love waves is discontinuous and ``jumping'' appears from the fundamental mode to higher modes on dispersive images. We introduce the guided waves generated in an LVL (LVL-guided waves, a trapped wave mode) to clarify the complexity of the dispersion energy. We confirm the LVL-guided waves by analyzing the snapshots of SH and P-SV wavefield and comparing the dispersive energy with theoretical values of phase velocities. Results demonstrate that LVL-guided waves possess energy on dispersive images, which can interfere with the normal dispersion energy of Rayleigh or Love waves. Each mode of LVL-guided waves having lack of energy at the free surface in some high frequency range causes the discontinuity of dispersive energy on dispersive images, which is because shorter wavelengths (generally with lower phase velocities and higher frequencies) of LVL-guided waves cannot penetrate to the free surface. If the S wave velocity of the LVL is higher than that of the surface layer, the energy of LVL-guided waves only contaminates higher mode energy of surface waves and there is no interlacement with the fundamental mode of surface waves, while if the S wave velocity of the LVL is lower than that of the surface layer, the energy of LVL-guided waves may interlace with the fundamental mode of surface waves. Both of the interlacements with the fundamental mode or higher mode energy may cause misidentification for the dispersion curves of surface

  19. Dispersion Energy Analysis of Rayleigh and Love Waves in the Presence of Low-Velocity Layers in Near-Surface Seismic Surveys

    Science.gov (United States)

    Mi, Binbin; Xia, Jianghai; Shen, Chao; Wang, Limin

    2018-03-01

    High-frequency surface-wave analysis methods have been effectively and widely used to determine near-surface shear (S) wave velocity. To image the dispersion energy and identify different dispersive modes of surface waves accurately is one of key steps of using surface-wave methods. We analyzed the dispersion energy characteristics of Rayleigh and Love waves in near-surface layered models based on numerical simulations. It has been found that if there is a low-velocity layer (LVL) in the half-space, the dispersion energy of Rayleigh or Love waves is discontinuous and ``jumping'' appears from the fundamental mode to higher modes on dispersive images. We introduce the guided waves generated in an LVL (LVL-guided waves, a trapped wave mode) to clarify the complexity of the dispersion energy. We confirm the LVL-guided waves by analyzing the snapshots of SH and P-SV wavefield and comparing the dispersive energy with theoretical values of phase velocities. Results demonstrate that LVL-guided waves possess energy on dispersive images, which can interfere with the normal dispersion energy of Rayleigh or Love waves. Each mode of LVL-guided waves having lack of energy at the free surface in some high frequency range causes the discontinuity of dispersive energy on dispersive images, which is because shorter wavelengths (generally with lower phase velocities and higher frequencies) of LVL-guided waves cannot penetrate to the free surface. If the S wave velocity of the LVL is higher than that of the surface layer, the energy of LVL-guided waves only contaminates higher mode energy of surface waves and there is no interlacement with the fundamental mode of surface waves, while if the S wave velocity of the LVL is lower than that of the surface layer, the energy of LVL-guided waves may interlace with the fundamental mode of surface waves. Both of the interlacements with the fundamental mode or higher mode energy may cause misidentification for the dispersion curves of surface

  20. Dispersion, Speciation, and Pollution Assessment of Heavy Metals Pb and Zn in Surface Sediment from Disturbed Ecosystem of Jeneberang Waters

    Science.gov (United States)

    Najamuddin; Surahman

    2017-10-01

    Surface sediments were collected from seventeen stations in Jeneberang waters (riverine, estuarine, and marine). Lead (Pb) and zinc (Zn) concentrations were determined by atomic absorption spectrometry, and the speciation of metals was obtained by a sequential extraction procedure. Dispersion of Pb and Zn were found higher in the riverine and marine samples than the estuarine samples. Following speciation, the metals were found similar composition of fraction in the riverine and estuarine samples but any different in the marine samples. The results indicated that there is a change of dispersion pattern and speciation composition of metals due to the presence of the dam that lies at the boundary between the estuary and the river. The toxicity unit was indicated low toxicity level; pollution level was in weakly to moderately polluted while the aquatic environment risk attributed were no risky to light risk.

  1. Polymer binding to carbon nanotubes in aqueous dispersions: residence time on the nanotube surface as obtained by NMR diffusometry.

    Science.gov (United States)

    Frise, Anton E; Pagès, Guilhem; Shtein, Michael; Pri Bar, Ilan; Regev, Oren; Furó, István

    2012-03-08

    The binding of block copolymer Pluronic F-127 in aqueous dispersions of single- (SWCNT) and multiwalled (MWCNT) carbon nanotubes has been studied by pulsed-field-gradient (PFG) (1)H NMR spectroscopy. We show that a major fraction of polymers exist as a free species while a minor fraction is bound to the carbon nanotubes (CNT). The polymers exchange between these two states with residence times on the nanotube surface of 24 ± 5 ms for SWCNT and of 54 ± 11 ms for MWCNT. The CNT concentration in the solution was determined by improved thermal gravimetric analysis (TGA) indicating that the concentration of SWCNT dispersed by F-127 was significantly higher than that for MWCNT. For SWCNT, the area per adsorbed Pluronic F-127 molecule is estimated to be about 40 nm(2).

  2. Finite-difference modeling and dispersion analysis of high-frequency love waves for near-surface applications

    Science.gov (United States)

    Luo, Y.; Xia, J.; Xu, Y.; Zeng, C.; Liu, J.

    2010-01-01

    Love-wave propagation has been a topic of interest to crustal, earthquake, and engineering seismologists for many years because it is independent of Poisson's ratio and more sensitive to shear (S)-wave velocity changes and layer thickness changes than are Rayleigh waves. It is well known that Love-wave generation requires the existence of a low S-wave velocity layer in a multilayered earth model. In order to study numerically the propagation of Love waves in a layered earth model and dispersion characteristics for near-surface applications, we simulate high-frequency (>5 Hz) Love waves by the staggered-grid finite-difference (FD) method. The air-earth boundary (the shear stress above the free surface) is treated using the stress-imaging technique. We use a two-layer model to demonstrate the accuracy of the staggered-grid modeling scheme. We also simulate four-layer models including a low-velocity layer (LVL) or a high-velocity layer (HVL) to analyze dispersive energy characteristics for near-surface applications. Results demonstrate that: (1) the staggered-grid FD code and stress-imaging technique are suitable for treating the free-surface boundary conditions for Love-wave modeling, (2) Love-wave inversion should be treated with extra care when a LVL exists because of a lack of LVL information in dispersions aggravating uncertainties in the inversion procedure, and (3) energy of high modes in a low-frequency range is very weak, so that it is difficult to estimate the cutoff frequency accurately, and "mode-crossing" occurs between the second higher and third higher modes when a HVL exists. ?? 2010 Birkh??user / Springer Basel AG.

  3. BaTiO3–P(VDF-HFP) nanocomposite dielectrics—Influence of surface modification and dispersion additives

    International Nuclear Information System (INIS)

    Ehrhardt, Claudia; Fettkenhauer, Christian; Glenneberg, Jens; Münchgesang, Wolfram; Pientschke, Christoph; Großmann, Thomas; Zenkner, Mandy; Wagner, Gerald; Leipner, Hartmut S.; Buchsteiner, Alexandra; Diestelhorst, Martin; Lemm, Sebastian; Beige, Horst; Ebbinghaus, Stefan G.

    2013-01-01

    Highlights: • Polymer composites were prepared using a sol–gel synthesized BaTiO 3 . • BaTiO 3 surface hydroxyle groups act as linkers for surfactant molecules. • The effect of chemical adjustment between surfactant and polymer host is studied. • A positive effect of an additional dispersant was found. • Dielectric properties of the resulting composite films are presented. -- Abstract: We report on BaTiO 3 –polymer composites as dielectrics for film capacitors. BaTiO 3 was synthesized by a sol–gel soft-chemistry method leading to spherical nanoparticles with a high degree of surface hydroxyl groups which turned out to be important for the bonding of surfactant molecules. As surfactants, n-octylphosphonic acid and 2,3,4,5,6-pentafluorobenzyl phosphonic acid were used to inhibit particle agglomeration and to improve the wetting behaviour with the polymer. The phosphonic acid-coated BaTiO 3 nanoparticles were dispersed in solutions of poly(vinylidefluoride-co-hexafluoropropylene). Composite films were prepared by the spin-coating technique. A systematic study was performed on the influence of varying oxide fractions, different surfactants and the effect of additional dispersion aids such as sodium dodecyl sulphate or BYK-W 9010 on the quality and dielectric properties of the films obtained. The chemical adjustment of the 2,3,4,5,6-pentaflourobenzyl phosphonic acid within the fluorinated organic host form a more uniform particle distribution and increase relative permittivity of the resulting composite material compared to the unflourinated surfactant. Additionally, an enhancement of the relative permittivity can be realized by adding of dispersants. These two components can increase the relative permittivity by factor 5 compared to the pure polymer material

  4. Law of similitude for the surface resistance of lacquered planes moving in a straight line through water

    Science.gov (United States)

    Gebers, Friedrich

    1925-01-01

    The proof of the validity of the Reynolds law of similitude for the surface resistance of planes has been developed with an accuracy hitherto unattained and for a large range of lengths and speeds. It has been shown that, in addition to the form resistance, the resistance of the longitudinal edges must be taken into account.

  5. The Complete Solution of Fick's Second Law of Diffusion with Time-dependent Diffusion Coefficient and Surface Concentration

    DEFF Research Database (Denmark)

    Mejlbro, Leif

    1996-01-01

    Fick's Second Law of Diffusion with time-dependent diffusioncoefficient and surface concentration is solved. Mimicking the classicalsolution, special time-dependent surface concentration functions areconsidered. These models are used in giving estimates of the lifetimeof the structure, when the c...... the concrete cover is given, as well as estimatesof the thickness of the concrete cover, when the expected lifetime is given.*Note: Book tilte: Durability of Concrete in Saline Environment...

  6. Dispersive Surface Energy and Acid-Base Parameters of Tosylate Functionalized Poly(ethylene glycol via Inverse Gas Chromatography

    Directory of Open Access Journals (Sweden)

    Feyza Sesigur

    2014-01-01

    Full Text Available An inverse gas chromatographic (IGC study of the sorption properties of poly(ethylene glycol modified with tosylate (PEG-TOS was presented. PEG-TOS was synthesized via the tosylation of the corresponding poly(ethylene glycol (PEG with p-toluenesulfonyl chloride in the basic medium. The synthesized PEG-Tos was characterized by FTIR-ATR and 1HNMR techniques. The retention diagrams of n-hexane, n-heptane, n-octane, n-nonane, n-decane, dichloromethane, chloroform, acetone, tetrahydrofuran, ethyl acetate, and ethanol on the PEG and PEG-Tos were plotted at temperatures in K between 303 and 373 by inverse gas chromatography technique. The dispersive component of the surface-free energy, γSD, of studied adsorbent surface was estimated using retention times of different nonpolar organics in the infinite dilution region. Thermodynamic parameters of adsorption (free energy, ΔGAS, enthalpy, ΔHAS, and entropy, ΔSAS, dispersive components of the surface energies, γSD, and the acid, KA, and base, KD, constants for the PEG and PEG-Tos were calculated and the results were discussed.

  7. Bacteria hold their breath upon surface contact as shown in a strain of Escherichia coli, using dispersed surfaces and flow cytometry analysis.

    Directory of Open Access Journals (Sweden)

    Jing Geng

    Full Text Available Bacteria are ubiquitously distributed throughout our planet, mainly in the form of adherent communities in which cells exhibit specific traits. The mechanisms underpinning the physiological shift in surface-attached bacteria are complex, multifactorial and still partially unclear. Here we address the question of the existence of early surface sensing through implementation of a functional response to initial surface contact. For this purpose, we developed a new experimental approach enabling simultaneous monitoring of free-floating, aggregated and adherent cells via the use of dispersed surfaces as adhesive substrates and flow cytometry analysis. With this system, we analyzed, in parallel, the constitutively expressed GFP content of the cells and production of a respiration probe--a fluorescent reduced tetrazolium ion. In an Escherichia coli strain constitutively expressing curli, a major E. coli adhesin, we found that single cell surface contact induced a decrease in the cell respiration level compared to free-floating single cells present in the same sample. Moreover, we show here that cell surface contact with an artificial surface and with another cell caused reduction in respiration. We confirm the existence of a bacterial cell "sense of touch" ensuring early signalling of surface contact formation through respiration down modulation.

  8. A Cassie-Like Law Using Triple Phase Boundary Line Fractions for Faceted Droplets on Chemically Heterogeneous Surfaces

    DEFF Research Database (Denmark)

    Larsen, Simon Tylsgaard; Taboryski, Rafael Jozef

    2009-01-01

    We present experimental contact angle data for surfaces, which were surface-engineered with a hydrophobic micropattern of hexagonal geometry. The chemically heterogeneous surface of the same hexagonal pattern of defects resulted in faceted droplets of hexagonal shape. When measuring the advancing...... contact angles with a viewing position aligned parallel to rows of defects, we found that an area averaged Cassie-law failed in describing the data. By replacing the area fractions by line fractions of the triple phase boundary Line segments in the Cassie equation, we found excellent agreement with data....

  9. Origin of Power Laws for Reactions at Metal Surfaces Mediated by Hot Electrons

    DEFF Research Database (Denmark)

    Olsen, Thomas; Schiøtz, Jakob

    2009-01-01

    density functional theory and the delta self-consistent field method. With a simplifying assumption, the power law becomes exact and we obtain a simple physical interpretation of the exponent n, which represents the number of adsorbate vibrational states participating in the reaction....... of such experiments is the emergence of a power law dependence of the reaction yield on the laser fluence Y similar to F-n. We propose a model of multiple inelastic scattering by hot electrons which reproduces this power law and the observed exponents of several experiments. All parameters are calculated within...

  10. Comparison of surface meteorological data representativeness for the Weldon Spring transport and dispersion modeling analysis

    International Nuclear Information System (INIS)

    Lazaro, M.

    1989-06-01

    The US Department of Energy is conducting the Weldon Spring Site Remedial Action Project under the Surplus Facilities Management Program (SFMP). The major goals of the SFMP are to eliminate potential hazards to the public and the environment that associated with contamination at SFMP sites and to make surplus property available for other uses to the extent possible. This report presents the results of analysis of available meteorological data from stations near the Weldon Spring site. Data that are most representative of site conditions are needed to accurately model the transport and dispersion of air pollutants associated with remedial activities. Such modeling will assist the development of mitigative measures. 17 refs., 12 figs., 6 tabs

  11. A characteristic function to estimate the longitudinal dispersion coefficient in surface water flows over porous media

    Science.gov (United States)

    Nofuentes, M.; Polo, M. J.

    2012-04-01

    One-dimensional modelling of solute transport in shallow water flows relies on an accurate approximation of the longitudinal dispersion coefficient, E, especially under transient conditions of the water flow during the solute residence time. Previous approaches have used expressions (e.g., the Rutherford equation) that allow the inclusion of spatiotemporal variability of E during the transport process, but their accuracy is reduced in marked transient regimes since the data were obtained from experimental work in rivers. This work proposes a different approach from experimental work with slow, shallow flows over porous media in fertigation essays, and provides us with a simple, parametric sigmoid function to estimate a priori effective values of E from simple measurements of flow characteristics and variables. The results have been successfully validated and compared to the Rutherford equation approach. Furthermore, the methodology to develop this characteristic function can be easily adapted for application in other practical cases.

  12. Surfactant-free carnauba wax dispersion and its use for layer-by-layer assembled protective surface coatings on wood

    Energy Technology Data Exchange (ETDEWEB)

    Lozhechnikova, Alina [Department of Forest Products Technology, School of Chemical Technology, Aalto University, P.O. Box 16300, FI-00076, Aalto (Finland); Bellanger, Hervé; Michen, Benjamin; Burgert, Ingo [Institute for Building Materials (IfB), Wood Materials Science, ETH Zürich, Stefano-Franscini-Platz 3, 8093 Zürich (Switzerland); Applied Wood Materials Laboratory, Empa − Swiss Federal Laboratories for Material Testing and Research, 8600 Dübendorf (Switzerland); Österberg, Monika, E-mail: monika.osterberg@aalto.fi [Department of Forest Products Technology, School of Chemical Technology, Aalto University, P.O. Box 16300, FI-00076, Aalto (Finland)

    2017-02-28

    Highlights: • A facile sonication route to produce aqueous wax dispersions is developed. • The wax dispersion is naturally stable and free of surfactants or stabilizers. • Wax and ZnO particles are coated onto wood using layer-by-layer assembly. • The coating brings superhydrophobicity while preserving moisture buffering. • ZnO improves the color stability of wood to UV light. - Abstract: Protection from liquid water and UV radiation are equally important, and a sophisticated approach is needed when developing surface coatings that preserve the natural and well-appreciated aesthetic appearance of wood. In order to prevent degradation and prolong the service life of timber, a protective coating was assembled using carnauba wax particles and zinc oxide nanoparticles via layer-by-layer deposition in water. For this purpose, a facile sonication route was developed to produce aqueous wax dispersion without any surfactants or stabilizers. The suspension was stable above pH 4 due to the electrostatic repulsion between the negatively charged wax particles. The particle size could be controlled by the initial wax concentration with average particle sizes ranging from 260 to 360 nm for 1 and 10 g/L, respectively. The deposition of wax particles onto the surface of spruce wood introduced additional roughness to the wood surface at micron level, while zinc oxide provided nano roughness and UV-absorbing properties. In addition to making wood superhydrophobic, this novel multilayer coating enhanced the natural moisture buffering capability of spruce. Moreover, wood surfaces prepared in this fashion showed a significant reduction in color change after exposure to UV light. A degradation of the wax through photocatalytic activity of the ZnO particles was measured by FTIR, indicating that further studies are required to achieve long-term stability. Nevertheless, the developed coating showed a unique combination of superhydrophobicity and excellent moisture buffering

  13. EFFECT OF VARIABLE VISCOSITY AND SUCTION/INJECTION ON THERMAL BOUNDARY LAYER OF A NON-NEWTONIAN POWER-LAW FLUIDS PAST A POWER-LAW STRETCHED SURFACE

    Directory of Open Access Journals (Sweden)

    Rania Fathy

    2010-01-01

    Full Text Available The analysis of laminar boundary layer flow and heat transfer of non-Newtonian fluids over a continuous stretched surface with suction or injection has been presented.The velocity and temperature of the sheet were assumed to vary in a power-law form, that is u = U0xm, and Tw(x = T+ Cxb. The viscosity of the fluid is assumed to be inverse linear function of temperature. The resulting governing boundary-layer equations are highly non-linear and coupled form of partial differential equations and they have been solved numerically by using the Runge-Kutta method and Shooting technique. Velocity and temperature distributions as well as the Nusselt number where studied for two thermal boundary conditions: uniform surface temperature (b = 0 and cooled surface temperature (b = -1, for different parameters: variable viscosity parameter qr, temperature exponent b, blowing parameter d and Prandtl number. The obtained results show that the flow and heat transfer characteristics are significantly influenced by these parameters.

  14. The Riemann surface of static limit dispersion relation and projective spaces

    International Nuclear Information System (INIS)

    Majewski, M.; Meshcheryakov, V.A.; Meshcheryakov, D.V.; Tran Quang Tuyet

    2004-01-01

    The rigorous Bogolyubov's proof of the dispersion relations (DR) for pion-nucleon scattering is a good foundation for the static models. DR contain a small parameter (ratio of the pion-nucleon masses). The static models arise when this parameter goes to zero. The S-matrix in the static models has a block structure. Each block of the S-matrix has a finite order NxN and is a matrix of meromorphic functions of the light particle energy ω in the complex plane with cuts (-∞, -1], [+1,+∞). In the elastic case, it reduces to N functions S i (ω) connected by the NxN crossing-symmetry matrix A. The unitarity and the crossing symmetry are the base for the system of nonlinear boundary value problems. It defines the analytical continuation of S i (ω) from the physical sheet to the unphysical ones and can be treated as a system of nonlinear difference equations. The problem is solvable for any 2x2 crossing-symmetry matrix A that permits one to calculate the Regge trajectories for the SU(2) static model. It is shown that global analyses of this system can be carried out effectively in projective spaces P N-1 and P N . The connection between the spaces P N-1 and P N is discussed. Some particular solutions of the system are found

  15. Microstructures of alloyed and dispersed hard particles in the aluminium surface

    CSIR Research Space (South Africa)

    Pityana, S

    2010-03-01

    Full Text Available Laser surface alloying of A1200 aluminium alloy was carried out using a 4.4 kW Nd:YAG laser. Powder mixtures of SiC and TiC hard particles were injected into the laser generated melt pool on the aluminium substrate using a commercial powder feeder...

  16. Roles for Cell Wall Glycopeptidolipid in Surface Adherence and Planktonic Dispersal of Mycobacterium avium

    Science.gov (United States)

    The opportunistic pathogen Mycobacterium avium is a significant inhabitant of biofilms in drinking water distribution systems. M. avium expresses on its cell surface serovar-specific glycopeptidolipids (ssGPLs). Studies have implicated the core GPL in biofilm formation by M. aviu...

  17. The Effect of Surface Tension on the Gravity-driven Thin Film Flow of Newtonian and Power-law Fluids.

    Science.gov (United States)

    Hu, Bin; Kieweg, Sarah L

    2012-07-15

    Gravity-driven thin film flow is of importance in many fields, as well as for the design of polymeric drug delivery vehicles, such as anti-HIV topical microbicides. There have been many prior works on gravity-driven thin films. However, the incorporation of surface tension effect has not been well studied for non-Newtonian fluids. After surface tension effect was incorporated into our 2D (i.e. 1D spreading) power-law model, we found that surface tension effect not only impacted the spreading speed of the microbicide gel, but also had an influence on the shape of the 2D spreading profile. We observed a capillary ridge at the front of the fluid bolus. Previous literature shows that the emergence of a capillary ridge is strongly related to the contact line fingering instability. Fingering instabilities during epithelial coating may change the microbicide gel distribution and therefore impact how well it can protect the epithelium. In this study, we focused on the capillary ridge in 2D flow and performed a series of simulations and showed how the capillary ridge height varies with other parameters, such as surface tension coefficient, inclination angle, initial thickness, and power-law parameters. As shown in our results, we found that capillary ridge height increased with higher surface tension, steeper inclination angle, bigger initial thickness, and more Newtonian fluids. This study provides the initial insights of how to optimize the flow and prevent the appearance of a capillary ridge and fingering instability.

  18. The Effect of Surface Tension on the Gravity-driven Thin Film Flow of Newtonian and Power-law Fluids

    Science.gov (United States)

    Hu, Bin; Kieweg, Sarah L.

    2012-01-01

    Gravity-driven thin film flow is of importance in many fields, as well as for the design of polymeric drug delivery vehicles, such as anti-HIV topical microbicides. There have been many prior works on gravity-driven thin films. However, the incorporation of surface tension effect has not been well studied for non-Newtonian fluids. After surface tension effect was incorporated into our 2D (i.e. 1D spreading) power-law model, we found that surface tension effect not only impacted the spreading speed of the microbicide gel, but also had an influence on the shape of the 2D spreading profile. We observed a capillary ridge at the front of the fluid bolus. Previous literature shows that the emergence of a capillary ridge is strongly related to the contact line fingering instability. Fingering instabilities during epithelial coating may change the microbicide gel distribution and therefore impact how well it can protect the epithelium. In this study, we focused on the capillary ridge in 2D flow and performed a series of simulations and showed how the capillary ridge height varies with other parameters, such as surface tension coefficient, inclination angle, initial thickness, and power-law parameters. As shown in our results, we found that capillary ridge height increased with higher surface tension, steeper inclination angle, bigger initial thickness, and more Newtonian fluids. This study provides the initial insights of how to optimize the flow and prevent the appearance of a capillary ridge and fingering instability. PMID:23687391

  19. Surface chemistry of water-dispersed detonation nanodiamonds modified by atmospheric DC plasma afterglow

    Czech Academy of Sciences Publication Activity Database

    Štenclová, Pavla; Celedova, V.; Artemenko, Anna; Jirásek, Vít; Jíra, Jaroslav; Rezek, B.; Kromka, Alexander

    2017-01-01

    Roč. 7, č. 62 (2017), s. 38973-38980 ISSN 2046-2069 R&D Projects: GA ČR GA15-01687S Institutional support: RVO:68378271 Keywords : diamond nanoparticles * explosive detonation * barrier discharge * absorption * oxidation Subject RIV: BL - Plasma and Gas Discharge Physics OBOR OECD: Fluids and plasma physics (including surface physics) Impact factor: 3.108, year: 2016

  20. What is the surface specific area of porous cement-based material? A nuclear magnetic relaxation dispersion approach.

    Science.gov (United States)

    Barberon, F; Korb, J-P; Petit, D; Morin, V; Bermejo, E

    2003-01-01

    We propose a new NMR method to measure and follow the evolution of the surface specific area, Sp, of a porous cement-based material. This method, that does not require any preliminary drying process, uses nuclear magnetic relaxation dispersion (NMRD), the measurement of spin-lattice relaxation rate as a function of magnetic field strength or nuclear Larmor frequency. The method is applied for three different mortars samples prepared by mixing cement, sand, silica fume, water and superplasticizer with a water to cement ratio w/c=0.25, 0.38 and 0.65, respectively. The evolution of Sp grows linearly with the degree of advancement of chemical reactions measured by thermal heating and we evidence two relaxation processes independent of the w/c ratio.

  1. [Energy dispersive spectrum analysis of surface compositions of selective laser melting cobalt-chromium alloy fabricated by different processing parameters].

    Science.gov (United States)

    Qian, Liang; Zeng, Li; Wei, Bin; Gong, Yao

    2015-06-01

    To fabricate selective laser melting cobalt-chromium alloy samples by different processing parameters, and to analyze the changes of energy dispersive spectrum(EDS) on their surface. Nine groups were set up by orthogonal experimental design according to different laser powers,scanning speeds and powder feeding rates(laser power:2500-3000 W, scanning speed: 5-15 mm/s, powder feeding rate: 3-6 r/min). Three cylinder specimens(10 mm in diameter and 3 mm in thickness) were fabricated in each group through Rofin DL 035Q laser cladding system using cobalt-chromium alloy powders which were developed independently by our group.Their surface compositions were then measured by EDS analysis. Results of EDS analysis of the 9 groups fabricated by different processing parameters(Co:62.98%-67.13%,Cr:25.56%-28.50%,Si:0.49%-1.23%) were obtained. They were similar to the compositions of cobalt-chromium alloy used in dental practice. According to EDS results, the surface compositions of the selective laser melting cobalt-chromium alloy samples are stable and controllable, which help us gain a preliminary sight into the range of SLM processing parameters. Supported by "973" Program (2012CB910401) and Research Fund of Science and Technology Committee of Shanghai Municipality (12441903001 and 13140902701).

  2. Entropy Generation Analysis of Power-Law Non-Newtonian Fluid Flow Caused by Micropatterned Moving Surface

    Directory of Open Access Journals (Sweden)

    M. H. Yazdi

    2014-01-01

    Full Text Available In the present study, the first and second law analyses of power-law non-Newtonian flow over embedded open parallel microchannels within micropatterned permeable continuous moving surface are examined at prescribed surface temperature. A similarity transformation is used to reduce the governing equations to a set of nonlinear ordinary differential equations. The dimensionless entropy generation number is formulated by an integral of the local rate of entropy generation along the width of the surface based on an equal number of microchannels and no-slip gaps interspersed between those microchannels. The velocity, the temperature, the velocity gradient, and the temperature gradient adjacent to the wall are substituted into this equation resulting from the momentum and energy equations obtained numerically by Dormand-Prince pair and shooting method. Finally, the entropy generation numbers, as well as the Bejan number, are evaluated. It is noted that the presence of the shear thinning (pseudoplastic fluids creates entropy along the surface, with an opposite effect resulting from shear thickening (dilatant fluids.

  3. Tuning the characteristics of surface plasmon polariton nanolasers by tailoring the dispersion relation

    Science.gov (United States)

    Lu, Tien-Chang; Chou, Yu-Hsun; Hong, Kuo-Bin; Chung, Yi-Cheng; Lin, Tzy-Rong; Arakelian, S. M.; Alodjants, A. P.

    2017-08-01

    Nanolasers with ultra-compact footprint are able to provide high intensity coherent light, which have various potential applications in high capacity signal processing, biosensing, and sub-wavelength imaging. Among various nanolasers, those lasers with cavities surrounded with metals have shown to have superior light emission properties due to the surface plasmon effect providing better field confinement capability and allowing exotic light-matter interaction. In this talk, we report robust ultraviolet ZnO nanolaser by using silver (Ag) [1] and aluminum (Al) [2] to strongly shrink the mode volume. The nanolasers operated at room temperature and even high temperature (353K) shows several distinct features including an extremely small mode volume, large Purcell factor and group index. Comparison of characteristics between Ag- and Al-based will also be made.

  4. Surfactant-free carnauba wax dispersion and its use for layer-by-layer assembled protective surface coatings on wood

    Science.gov (United States)

    Lozhechnikova, Alina; Bellanger, Hervé; Michen, Benjamin; Burgert, Ingo; Österberg, Monika

    2017-02-01

    Protection from liquid water and UV radiation are equally important, and a sophisticated approach is needed when developing surface coatings that preserve the natural and well-appreciated aesthetic appearance of wood. In order to prevent degradation and prolong the service life of timber, a protective coating was assembled using carnauba wax particles and zinc oxide nanoparticles via layer-by-layer deposition in water. For this purpose, a facile sonication route was developed to produce aqueous wax dispersion without any surfactants or stabilizers. The suspension was stable above pH 4 due to the electrostatic repulsion between the negatively charged wax particles. The particle size could be controlled by the initial wax concentration with average particle sizes ranging from 260 to 360 nm for 1 and 10 g/L, respectively. The deposition of wax particles onto the surface of spruce wood introduced additional roughness to the wood surface at micron level, while zinc oxide provided nano roughness and UV-absorbing properties. In addition to making wood superhydrophobic, this novel multilayer coating enhanced the natural moisture buffering capability of spruce. Moreover, wood surfaces prepared in this fashion showed a significant reduction in color change after exposure to UV light. A degradation of the wax through photocatalytic activity of the ZnO particles was measured by FTIR, indicating that further studies are required to achieve long-term stability. Nevertheless, the developed coating showed a unique combination of superhydrophobicity and excellent moisture buffering ability and some UV protection, all achieved using an environmentally friendly coating process, which is beneficial to retain the natural appearance of wood and improve indoor air quality and comfort.

  5. Effect of surface tension on the behavior of adhesive contact based on Lennard-Jones potential law

    Science.gov (United States)

    Zhu, Xinyao; Xu, Wei

    2018-02-01

    The present study explores the effect of surface tension on adhesive contact behavior where the adhesion is interpreted by long-range intermolecular forces. The adhesive contact is analyzed using the equivalent system of a rigid sphere and an elastic half space covered by a membrane with surface tension. The long-range intermolecular forces are modeled with the Lennard‒Jones (L‒J) potential law. The current adhesive contact issue can be represented by a nonlinear integral equation, which can be solved by Newton‒Raphson method. In contrast to previous studies which consider intermolecular forces as short-range, the present study reveals more details of the features of adhesive contact with surface tension, in terms of jump instabilities, pull-off forces, pressure distribution within the contact area, etc. The transition of the pull-off force is not only consistent with previous studies, but also presents some new interesting characteristics in the current situation.

  6. Synthesis, characterization and cytotoxicity of surface amino-functionalized water-dispersible multi-walled carbon nanotubes

    Science.gov (United States)

    Vuković, Goran; Marinković, Aleksandar; Obradović, Maja; Radmilović, Velimir; Čolić, Miodrag; Aleksić, Radoslav; Uskoković, Petar S.

    2009-06-01

    Surface functionalization of multi-walled carbon nanotubes (MWCNTs), with amino groups via chemical modification of carboxyl groups introduced on the nanotube surface, using O-(7-azabenzotriazol-1-yl)- N, N, N', N'-tetramethyluronium hexafluorophosphate (N-HATU) and N, N-diisopropylethylamine (DIEA) is reported. The N-HATU coupling agent provides faster reaction rate and the reaction occurs at lower temperature compared to amidation and acylation-amidation chemistry. The amines, 1,6-hexanediamine (HDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and 1,4-phenylenediamine (PDA) were used. The resulting materials were characterized with different techniques such as FTIR, XRD, elemental analysis, TGA, TEM, UV-vis spectroscopy and cyclic voltammetry. MWCNTs functionalized with PDA posses the best dispersibility and electron transfer properties in comparison to the others amines. Functionalized MWCNTs, at the concentrations between 1 and 50 μg ml -1, were not cytotoxic for the fibroblast L929 cell line. However, the concentrations of MWCNTs higher of 10 μg ml -1 reduced cell growth and this effect correlated positively with the degree of their uptake by L929 cells.

  7. Synthesis, characterization and cytotoxicity of surface amino-functionalized water-dispersible multi-walled carbon nanotubes

    Energy Technology Data Exchange (ETDEWEB)

    Vukovic, Goran; Marinkovic, Aleksandar [Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade (Serbia); Obradovic, Maja [Institute of Chemistry, Technology and Metallurgy, University of Belgrade, Njegoseva 12, 11001 Belgrade (Serbia); Radmilovic, Velimir [National Centre for Electron Microscopy, Lawrence Berkeley National Laboratory, Berkeley, CA 94720 (United States); Colic, Miodrag [Institute for Medical Research, Military Medical Academy, Crnotravska 17, 11002 Belgrade (Serbia); Aleksic, Radoslav [Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade (Serbia); Uskokovic, Petar S., E-mail: puskokovic@tmf.bg.ac.rs [Faculty of Technology and Metallurgy, University of Belgrade, Karnegijeva 4, 11120 Belgrade (Serbia)

    2009-06-30

    Surface functionalization of multi-walled carbon nanotubes (MWCNTs), with amino groups via chemical modification of carboxyl groups introduced on the nanotube surface, using O-(7-azabenzotriazol-1-yl)-N,N,N',N'-tetramethyluronium hexafluorophosphate (N-HATU) and N,N-diisopropylethylamine (DIEA) is reported. The N-HATU coupling agent provides faster reaction rate and the reaction occurs at lower temperature compared to amidation and acylation-amidation chemistry. The amines, 1,6-hexanediamine (HDA), diethylenetriamine (DETA), triethylenetetramine (TETA) and 1,4-phenylenediamine (PDA) were used. The resulting materials were characterized with different techniques such as FTIR, XRD, elemental analysis, TGA, TEM, UV-vis spectroscopy and cyclic voltammetry. MWCNTs functionalized with PDA posses the best dispersibility and electron transfer properties in comparison to the others amines. Functionalized MWCNTs, at the concentrations between 1 and 50 {mu}g ml{sup -1}, were not cytotoxic for the fibroblast L929 cell line. However, the concentrations of MWCNTs higher of 10 {mu}g ml{sup -1} reduced cell growth and this effect correlated positively with the degree of their uptake by L929 cells.

  8. Localized surface plasmon resonances in spatially dispersive nano-objects: phenomenological treatise.

    Science.gov (United States)

    Ginzburg, Pavel; Zayats, Anatoly V

    2013-05-28

    Nonlocal optical response of materials, important at the nanometric scale, influences numerous optical phenomena, such as electromagnetic field confinement and spectral characteristics of plasmonic resonances. Here, we present a general phenomenological approach to account for nonlocal material polarizabilities in nanoscale metal particles. The problem of nonlocal plasmonic resonances is formulated by an integro-differential equation in a space domain and solved by adopting its weak form, implemented in the finite element method, thus, dispensing with the requirements on additional boundary conditions. As an example, nonlocal smearing effects in plasmonic nanorods of various cross sections and nanotubes have been considered. Clear signature of nonlocality manifests itself in the interference fringes in the potential profile and a significant frequency shift of the localized surface plasmon resonances. These effects are especially important for nanoparticles with geometrical features comparable to the de Broglie wavelengths of electrons participating in the light-matter interactions. The proposed method provides a universal tool for phenomenological account of nonlocalities of any kind with the only requirement of linearity in system's response.

  9. Dispersion of inorganic contaminants in surface water in the vicinity of Potchefstroom

    Science.gov (United States)

    Manyatshe, A.; Fosso-Kankeu, E.; van der Berg, D.; Lemmer, N.; Waanders, F.; Tutu, H.

    2017-08-01

    Potchefstroom and the neighbouring cities rely mostly on the Mooi River and Vaal River for their water needs. These rivers flow through the gold mining areas and farms, and are therefore likely to be contaminated with substantial amounts of inorganic pollutants. Water was collected along the rivers network, streams, canals and dams in Potchefstroom and the vicinity. The samples were characterized for geochemical parameters, metals and anions concentrations. The results showed high concentrations of potentially toxic elements such as As (4.53 mg/L - 5.74 mg/L), Cd (0.25 mg/L - 0.7 mg/L), Pb (1.14 mg/L - 5.13 mg/L) and U (0.04 mg/L - 0.11 mg/L) which were predominantly found around the mining areas. Elevated concentrations of anions such SO42- and CN- were detected around mining areas while NO3- was dominant near farms. The relatively high levels of anions and metals in the surface water made it unfit for domestic or agricultural use. The study showed that contaminants in mining and agricultural facilities were potentially mobilised, thus impacting the nearby water systems.

  10. Effect of Surface Morphology and Dispersion Media on the Properties of PEDOT:PSS/n-Si Hybrid Solar Cell Containing Functionalized Graphene

    Directory of Open Access Journals (Sweden)

    Pham Van Trinh

    2017-01-01

    Full Text Available We present the results on the effect of surface morphology and dispersion media on the properties of PEDOT:PSS/n-Si hybrid solar cell containing functionalized graphene (Gr. The hybrid solar cells based on SiNWs showed higher power conversion efficiency (PCE compared to the planar based cells due to suppressing the carrier recombination and improving carrier transport efficiency. The PCE of hybrid solar cells could be improved by adding Gr into PEDOT:PSS. Different solvents including deionized (DI water, ethylene glycol (EG, and isopropyl alcohol (IPA were used as media for Gr dispersion. The best performance was obtained for the cell containing Gr dispersed in EG with a measured PCE of 7.33% and nearly 13% and 16% enhancement in comparison with the cells using Gr dispersed in IPA and DI water, respectively. The increase in PCE is attributed to improving the carrier-mobility, electrical conductivity, PEDOT crystallinity, and ordering.

  11. Surface area normalized dissolution to study differences in itraconazole-copovidone solid dispersions prepared by spray-drying and hot melt extrusion.

    Science.gov (United States)

    Bhardwaj, Vivekanand; Trasi, Niraj S; Zemlyanov, Dmitry Y; Taylor, Lynne S

    2018-04-05

    Amorphous solid dispersions of itraconazole (ITZ) and copovidone (PVPVA 64) at 1:1 to 1:9 drug-polymer ratios were prepared using spray-drying (SD) and hot melt (HM) extrusion for comparative evaluation. Surface area normalized dissolution studies were carried out using a modified intrinsic dissolution rate (IDR) assembly and rate of release of drug as well as polymer were quantified using ultraviolet spectroscopy. The melt quenched amorphous form of ITZ provided an 18-fold dissolution advantage over the crystalline form. In general, dispersions prepared by either SD or HM showed similar dissolution profiles in terms of drug release. Both drug-controlled and polymer-controlled ITZ dissolution rates were observed, depending on the drug loading, where a switch from a drug-controlled to a polymer-controlled regime was observed when the drug loading was approximately 20% or lower. The impact of the spray drying solvent composition was studied and found to have a large effect on the drug release rate for dispersions containing a drug loading of 20%. Electron microscopy showed differences in surface morphology (scanning) and internal structure (transmission) in these dispersions as a function of solvent system. X-ray photoelectron spectroscopy (XPS) revealed differences in the surface composition of drug and polymer whereby poorly dissolving systems showed drug enrichment. This study provides insight into the complex interplay between formulation, processing and performance of amorphous solid dispersion systems. Copyright © 2018 Elsevier B.V. All rights reserved.

  12. Separation and concentration of natural products by fast forced adsorption using well-dispersed velvet-like graphitic carbon nitride with response surface methodology optimisation.

    Science.gov (United States)

    Ding, Xinru; Zhu, Jun; Zhang, Yue; Xia, Qian; Bi, Wentao; Yang, Xiaodi; Yang, Jinfei

    2016-07-01

    Well-dispersed velvet-like graphitic carbon nitride nanoparticles with a large surface area were prepared and utilized for separation and concentration of bioactive compounds from fruit extracts by fast (20s) forced adsorption. The large surface area, enhanced non-covalent interactions of this nanoparticle with bioactive compounds and good dispersity in different solvents benefited its application as a good sorbent. To evaluate their adsorption capabilities, these carbon nitride nanoparticles were used for separation and concentration of flavonoids from fruit extracts by a forced-adsorption dispersive solid phase extraction method. The combined use of this nanoparticle and our experimental conditions showed excellent precision (3.6-4.7%) and sensitivity (limits of detection (S/N=3): 0.6-3.75ng/mL). This research provides an alternative strategy to prepare suitable sorbents for adsorption, separation and concentration of various compounds from different extracts. Copyright © 2016 Elsevier B.V. All rights reserved.

  13. Experimental Measurements of Concentration Fluctuations and Scales in a Dispersing Plume in the Atmospheric Surface Layer Obtained Using a Very Fast Response Concentration Detector

    Science.gov (United States)

    2016-06-14

    VOLUME 33 Experimental Measurements of Concentration Fluctuations and Scales in a Dispersing Plume in the Atmospheric Surface Layer Obtained Using a...Very Fast Response Concentration Detector EUGENE YEE Defence Research Establishment Suffield, Medicine Hat, Alberta , Canada R. CHAN AND P. R...various concentration timescales, length scales , and microscales (e.g., Taylor microscale, correlation scale , length scale based on the spectral

  14. Models of oil spill dispersion stability

    International Nuclear Information System (INIS)

    Fingas, M.

    2009-01-01

    This paper summarized the theory of oil-in-water emulsion stability resulting in the resurfacing of oil spill dispersion. Since most emulsions are unstable, they will break down into their constituent parts because of the many forces and processes that act on them. These include gravitational forces; surfactant interchange with water and the subsequent surfactant loss to the water column; creaming; coalescence; flocculation; Ostwald ripening; and sedimentation. Gravitational separation is the most important force that contributes to the resurfacing of oil droplets from an oil-in-water emulsion. The paper presented a newly developed model that used 4 basic processes. Initial dispersion was an input, then the dispersion was distributed over the mixing depth, as predicted by the wave height. The droplets then rise to the surface according to Stokes' law. Oil on the surface from the rising oil and undispersed oil is redispersed. The droplets in the water column are subject to coalescence as governed by the Smoluchowski equation. The dispersion in the water column therefore decreases at an exponential rate with dispersion half-lives ranging from 120 to 250 minutes. Over 200 runs were performed using variations of the models. The study showed that the most important factor is the effectiveness of the initial dispersion and the the redispersion. Increased sea energy was found to increase the amount of coalescence that occurs, resulting in an increase in resurfacing. However, increased turbulence also caused redispersion, offsetting the effect of the recoalescence slightly. 17 refs., 5 tabs., 13 figs.

  15. Dispersion of Short- and Medium-Chain Chlorinated Paraffins (CPs) from a CP Production Plant to the Surrounding Surface Soils and Coniferous Leaves.

    Science.gov (United States)

    Xu, Jiazhi; Gao, Yuan; Zhang, Haijun; Zhan, Faqiang; Chen, Jiping

    2016-12-06

    Chlorinated paraffin (CP) production is one important emission source for short- and medium-chain CPs (SCCPs and MCCPs) in the environment. In this study, 48 CP congener groups were measured in the surface soils and coniferous leaves collected from the inner and surrounding environment of a CP production plant that has been in operation for more than 30 years to investigate the dispersion and deposition behavior of SCCPs and MCCPs. The average concentrations of the sum of SCCPs and MCCPs in the in-plant coniferous leaves and surface soils were 4548.7 ng g -1 dry weight (dw) and 3481.8 ng g -1 dw, which were 2-fold and 10-fold higher than those in the surrounding environment, respectively. The Gaussian air pollution model explained the spatial distribution of CPs in the coniferous leaves, whereas the dispersion of CPs to the surrounding surface soils fits the Boltzmann equation well. Significant fractionation effect was observed for the atmospheric dispersion of CPs from the production plant. CP congener groups with higher octanol-air partitioning coefficients (K OA ) were more predominant in the in-plant environment, whereas the ones with lower K OA values had the elevated proportion in the surrounding environment. A radius of approximately 4 km from the CP production plant was influenced by the atmospheric dispersion and deposition of CPs.

  16. Poly(acrylic acid-co-maleic acid), a polymer dispersant for the control of oxide deposition over nuclear steam generator surfaces

    Science.gov (United States)

    Joshi, Akhilesh Chandra; Rufus, Appadurai Lagorious; Velmurugan, Sankaralingam

    2018-01-01

    Nuclear reactors face extended outages due to Steam Generator (SG) tube failure. Study was carried out to evaluate Poly (acrylic acid-co-maleic acid) [PAMA], as polymeric dispersant for online cleaning of SGs. The transfer of iron from carbon steel surfaces in presence of PAMA to SG tube materials viz., alloy-400 and alloy-800 in deoxygenated and alkaline conditions at 240 °C was investigated. Addition of PAMA will not only prevent the deposition on the SG tube surfaces but also help in forming a better protective inner oxide layer on the surfaces. The oxides so formed were characterised by X-ray Diffraction (XRD), Raman Spectroscopy, X-ray Photoelectron Spectroscopy (XPS) and electrochemical techniques viz., Potentio-Dynamic Anodic Polarization (PDAP) and Electrochemical Impedance Spectroscopy (EIS) to establish their protectiveness and to understand the dispersive action of PAMA. Furthermore, aqueous solution of PAMA was thermally stable besides it was also found to scavenge Dissolved Oxygen (DO).

  17. Is subterranean lifestyle reversible? Independent and recent large-scale dispersal into surface waters by two species of the groundwater amphipod genus Niphargus.

    Science.gov (United States)

    Copilaş-Ciocianu, Denis; Fišer, Cene; Borza, Péter; Petrusek, Adam

    2018-02-01

    Groundwater is an extreme environment due to its absence of light, resource scarcity and highly fragmentary nature. Successful groundwater colonizers underwent major evolutionary changes and exhibit eye and pigment loss (troglomorphies). Consequently, their chances of dispersal and survival in the well-connected surface waters are greatly decreased, resulting in significant endemism. The West Palaearctic subterranean amphipod genus Niphargus comprises hundreds of narrowly endemic and troglomorphic species. Nevertheless, a few are known to occur in surface waters, two of which, N. hrabei and N. valachicus, have extremely large ranges that even exceed those of many surface-water amphipods. We tested if this pattern results from a secondary colonization of the relatively well-connected epigean environment, and whether this ecological shift promoted the large-scale dispersal of these species. Results showed that despite their ecological and zoogeographic similarities, N. hrabei and N. valachicus are not closely related and independently colonized surface waters. Their phylogeographic patterns indicate Middle to Late Pleistocene dispersal episodes throughout the Danube lowlands, and relatively modest yet significant genetic differentiation among populations. Clustering based on morphology revealed that the two species are phenotypically closer to each other than they are to most other epigean congeners. We presume that the ecological shift to surface environments was facilitated by their ability to thrive in hypoxic waters where rheophilic competitors from the family Gammaridae cannot survive. In conclusion, our results indicate that adaptation to groundwater is not a one-way evolutionary path and that troglomorphic species can occasionally recolonize and widely disperse in surface waters. Copyright © 2017 Elsevier Inc. All rights reserved.

  18. Modification of dispersibility of nanodiamond by grafting of polyoxyethylene and by the introduction of ionic groups onto the surface via radical trapping

    Energy Technology Data Exchange (ETDEWEB)

    Cha, I. [Graduate School of Science and Technology, Niigata University, 8050, Ikarashi, 2-no-cho, Nishi-ku, Niigata 950-2181 (Japan); Hashimoto, K. [Department of Material Science and Technology, Faculty of Engineering, Niigata University, 8050, Ikarashi, 2-no-cho, Nishi-ku, Niigata 950-218 (Japan); Fujiki, K. [Department of Environmental Science, Niigata Institute of Technology, 1719, Fujihashi, Kashiwazaki, Niigata 945-1195 (Japan); Yamauchi, T. [Graduate School of Science and Technology, Niigata University, 8050, Ikarashi, 2-no-cho, Nishi-ku, Niigata 950-2181 (Japan); Department of Material Science and Technology, Faculty of Engineering, Niigata University, 8050, Ikarashi, 2-no-cho, Nishi-ku, Niigata 950-218 (Japan); Tsubokawa, N., E-mail: ntsuboka@eng.niigata-u.ac.jp [Graduate School of Science and Technology, Niigata University, 8050, Ikarashi, 2-no-cho, Nishi-ku, Niigata 950-2181 (Japan); Department of Material Science and Technology, Faculty of Engineering, Niigata University, 8050, Ikarashi, 2-no-cho, Nishi-ku, Niigata 950-218 (Japan)

    2014-02-14

    To improve the dispersibility of polycrystalline nanodiamond (ND) in solvents, the grafting of polymers and introduction of ionic groups onto ND surface via radical trapping by ND surface were investigated. The grafting of polyoxyethylene (POE) onto ND surface by trapping of POE radicals formed by the thermal decomposition of POE macro azo-initiator (Azo-POE) was examined. The polymer radicals formed by the thermal decomposition of Azo-POE were successfully trapped by ND surface to give POE-grafted ND. The effect of temperature on the grafting of POE onto ND was discussed. In addition, the introduction of cationic protonated amidine groups onto ND was achieved by the trapping of radicals bearing protonated amidine groups formed by thermal decomposition of 2,2′-azobis(2-methylpropionamidine)dihydrochloride (AMPA). The anionic carboxylate groups was introduced onto ND surface by the trapping of the radicals bearing carboxyl groups formed by thermal decomposition of 4,4′-azobis(4-cyonovaleric acid) (ACVA) followed by the treatment with NaOH aqueous solution. The dispersibility of ND in water was remarkably improved by the grafting of POE, based on the steric hindrance of polymer chains and by the introduction of ionic groups, based on the ionic repulsion, onto ND surface. - Highlights: • Grafting of PEG onto nanodiamond was achieved by radical trapping. • Introduction of ionic groups onto nanodiamond was achieved by radical trapping. • Nanodiamond was dispersed by PEG grafting based on steric hindrance of PEG chains. • Nanodiamond was dispersed by introduction of ionic groups based on ionic repulsion.

  19. Modification of dispersibility of nanodiamond by grafting of polyoxyethylene and by the introduction of ionic groups onto the surface via radical trapping

    International Nuclear Information System (INIS)

    Cha, I.; Hashimoto, K.; Fujiki, K.; Yamauchi, T.; Tsubokawa, N.

    2014-01-01

    To improve the dispersibility of polycrystalline nanodiamond (ND) in solvents, the grafting of polymers and introduction of ionic groups onto ND surface via radical trapping by ND surface were investigated. The grafting of polyoxyethylene (POE) onto ND surface by trapping of POE radicals formed by the thermal decomposition of POE macro azo-initiator (Azo-POE) was examined. The polymer radicals formed by the thermal decomposition of Azo-POE were successfully trapped by ND surface to give POE-grafted ND. The effect of temperature on the grafting of POE onto ND was discussed. In addition, the introduction of cationic protonated amidine groups onto ND was achieved by the trapping of radicals bearing protonated amidine groups formed by thermal decomposition of 2,2′-azobis(2-methylpropionamidine)dihydrochloride (AMPA). The anionic carboxylate groups was introduced onto ND surface by the trapping of the radicals bearing carboxyl groups formed by thermal decomposition of 4,4′-azobis(4-cyonovaleric acid) (ACVA) followed by the treatment with NaOH aqueous solution. The dispersibility of ND in water was remarkably improved by the grafting of POE, based on the steric hindrance of polymer chains and by the introduction of ionic groups, based on the ionic repulsion, onto ND surface. - Highlights: • Grafting of PEG onto nanodiamond was achieved by radical trapping. • Introduction of ionic groups onto nanodiamond was achieved by radical trapping. • Nanodiamond was dispersed by PEG grafting based on steric hindrance of PEG chains. • Nanodiamond was dispersed by introduction of ionic groups based on ionic repulsion

  20. In Vitro assessment of dentin erosion after immersion in acidic beverages: surface profile analysis and energy-dispersive X-ray fluorescence spectrometry study

    OpenAIRE

    Caneppele, Taciana Marco Ferraz; Jeronymo, Raffaela Di Iorio; Di Nicoló, Rebeca; Araújo, Maria Amélia Máximo de; Soares, Luís Eduardo Silva

    2012-01-01

    The aim of this study was to investigate the effects of some acidic drinks on dentin erosion, using methods of surface profile (SP) analysis and energy-dispersive X-ray fluorescence spectrometry (EDXRF). One hundred standardized dentin slabs obtained from bovine incisor roots were used. Dentin slabs measuring 5x5 mm were ground flat, polished and half of each specimen surface was protected with nail polish. For 60 min, the dentin surfaces were immersed in 50 mL of 5 different drinks (Gatorade...

  1. Influence of spray drying and dispersing agent on surface and dissolution properties of griseofulvin micro and nanocrystals.

    Science.gov (United States)

    Shah, Dhaval A; Patel, Manan; Murdande, Sharad B; Dave, Rutesh H

    2016-11-01

    The purpose for the current research is to compare and evaluate physiochemical properties of spray-dried (SD) microcrystals (MCs), nanocrystals (NCs), and nanocrystals with a dispersion agent (NCm) from a poorly soluble compound. The characterization was carried out by performing size and surface analysis, interfacial tension (at particle moisture interface), and in-vitro drug dissolution rate experiments. Nanosuspensions were prepared by media milling and were spray-dried. The SD powders that were obtained were characterized morphologically using scanning electron microscopy (SEM), polarized light microscopy (PLM), and Flowchem. Solid-state characterization was performed using X-ray powder diffraction (XRPD), Fourier transfer infrared spectroscopy (FT-IR), and differential scanning calorimetry (DSC) for the identification of the crystalline nature of all the SD powders. The powders were characterized for their redispersion tendency in the water and in pH 1.2. Significant differences in redispersion were noted for both the NCs in both dissolution media. The interfacial tension for particle moisture interface was determined by applying the BET (Braunauer-Emmett-Teller) equation to the vapor sorption data. No significant reduction in the interfacial tension was observed between MCs and NCs; however, a significant reduction in the interfacial tension was observed for NCm at both 25 °C and 35 °C temperatures. The difference in interfacial tension and redispersion behavior can be attributed to a difference in the wetting tendency for all the SD powders. The dissolution studies were carried out under sink and under non-sink conditions. The non-sink dissolution approach was found suitable for quantification of the dissolution rate enhancement, and also for providing the rank order to the SD formulations.

  2. Lithospheric architecture of NE China from joint Inversions of receiver functions and surface wave dispersion through Bayesian optimisation

    Science.gov (United States)

    Sebastian, Nita; Kim, Seongryong; Tkalčić, Hrvoje; Sippl, Christian

    2017-04-01

    The purpose of this study is to develop an integrated inference on the lithospheric structure of NE China using three passive seismic networks comprised of 92 stations. The NE China plain consists of complex lithospheric domains characterised by the co-existence of complex geodynamic processes such as crustal thinning, active intraplate cenozoic volcanism and low velocity anomalies. To estimate lithospheric structures with greater detail, we chose to perform the joint inversion of independent data sets such as receiver functions and surface wave dispersion curves (group and phase velocity). We perform a joint inversion based on principles of Bayesian transdimensional optimisation techniques (Kim etal., 2016). Unlike in the previous studies of NE China, the complexity of the model is determined from the data in the first stage of the inversion, and the data uncertainty is computed based on Bayesian statistics in the second stage of the inversion. The computed crustal properties are retrieved from an ensemble of probable models. We obtain major structural inferences with well constrained absolute velocity estimates, which are vital for inferring properties of the lithosphere and bulk crustal Vp/Vs ratio. The Vp/Vs estimate obtained from joint inversions confirms the high Vp/Vs ratio ( 1.98) obtained using the H-Kappa method beneath some stations. Moreover, we could confirm the existence of a lower crustal velocity beneath several stations (eg: station SHS) within the NE China plain. Based on these findings we attempt to identify a plausible origin for structural complexity. We compile a high-resolution 3D image of the lithospheric architecture of the NE China plain.

  3. Lithology, monsoon and sea-surface current control on provenance, dispersal and deposition of sediments over the Andaman continental shelf

    Digital Repository Service at National Institute of Oceanography (India)

    Damodararao, K.; Singh, S.K.; Rai, V.K.; Ramaswamy, V.; Rao, P.S.

    , constrain their transport pathways and assess the factors influencing the erosion in the catchment and their dispersal and deposition over the Andaman Shelf region. Major elemental compositions of the shelf sediments suggest mafic lithology...

  4. Rapid Formation of Microbe-Oil Aggregates and Changes in Community Composition in Coastal Surface Water Following Exposure to Oil and the Dispersant Corexit

    Directory of Open Access Journals (Sweden)

    Shawn M. Doyle

    2018-04-01

    Full Text Available During the Deepwater Horizon (DWH oil spill, massive quantities of oil were deposited on the seafloor via a large-scale marine oil-snow sedimentation and flocculent accumulation (MOSSFA event. The role of chemical dispersants (e.g., Corexit applied during the DWH oil spill clean-up in helping or hindering the formation of this MOSSFA event are not well-understood. Here, we present the first experiment related to the DWH oil spill to specifically investigate the relationship between microbial community structure, oil and Corexit®, and marine oil-snow in coastal surface waters. We observed the formation of micron-scale aggregates of microbial cells around droplets of oil and dispersant and found that their rate of formation was directly related to the concentration of oil within the water column. These micro-aggregates are potentially important precursors to the formation of larger marine oil-snow particles. Therefore, our observation that Corexit® significantly enhanced their formation suggests dispersant application may play a role in the development of MOSSFA events. We also observed that microbial communities in marine surface waters respond to oil and oil plus Corexit® differently and much more rapidly than previously measured, with major shifts in community composition occurring within only a few hours of experiment initiation. In the oil-amended treatments without Corexit®, this manifested as an increase in community diversity due to the outgrowth of several putative aliphatic- and aromatic-hydrocarbon degrading genera, including phytoplankton-associated taxa. In contrast, microbial community diversity was reduced in mesocosms containing chemically dispersed oil. Importantly, different consortia of hydrocarbon degrading bacteria responded to oil and chemically dispersed oil, indicating that functional redundancy in the pre-spill community likely results in hydrocarbon consumption in both undispersed and dispersed oils, but by different

  5. Theoretical Analysis of the Relative Significance of Thermodynamic and Kinetic Dispersion in the dc and ac Voltammetry of Surface-Confined Molecules

    KAUST Repository

    Morris, Graham P.

    2015-05-05

    © 2015 American Chemical Society. Commonly, significant discrepancies are reported in theoretical and experimental comparisons of dc voltammograms derived from a monolayer or close to monolayer coverage of redox-active surface-confined molecules. For example, broader-than-predicted voltammetric wave shapes are attributed to the thermodynamic or kinetic dispersion derived from distributions in reversible potentials (E0) and electrode kinetics (k0), respectively. The recent availability of experimentally estimated distributions of E0 and k0 values derived from the analysis of data for small numbers of surface-confined modified azurin metalloprotein molecules now allows more realistic modeling to be undertaken, assuming the same distributions apply under conditions of high surface coverage relevant to voltammetric experiments. In this work, modeling based on conventional and stochastic kinetic theory is considered, and the computationally far more efficient conventional model is shown to be equivalent to the stochastic one when large numbers of molecules are present. Perhaps unexpectedly, when experimentally determined distributions of E0 and k0 are input into the model, thermodynamic dispersion is found to be unimportant and only kinetic dispersion contributes significantly to the broadening of dc voltammograms. Simulations of ac voltammetric experiments lead to the conclusion that the ac method, particularly when the analysis of kinetically very sensitive higher-order harmonics is undertaken, are far more sensitive to kinetic dispersion than the dc method. ac methods are therefore concluded to provide a potentially superior strategy for addressing the inverse problem of determining the k0 distribution that could give rise to the apparent anomalies in surface-confined voltammetry.

  6. Structural and mechanical properties of "peelable" organoaqueous dispersions with partially hydrolyzed poly(vinyl acetate)-borate networks: applications to cleaning painted surfaces.

    Science.gov (United States)

    Natali, Irene; Carretti, Emiliano; Angelova, Lora; Baglioni, Piero; Weiss, Richard G; Dei, Luigi

    2011-11-01

    The preparation and structural characterization of a family of viscoelastic dispersions of borate cross-linked, 80% hydrolyzed poly(vinyl acetate) (80PVAc) in aqueous-organic liquids are presented. Correlations between mechanical properties (from rheological measurements) and the degree and nature of cross-linking (from (11)B NMR spectroscopy) are reported, and the results are used to assess their potential as low-impact cleaning agents for the surfaces of paintings. Because the dispersions can be prepared at room temperature by simple procedures from readily available materials and can contain up to 50% (w/w) of an organic liquid, they offer important advantages over previously described cleaning agents that are based on fully hydrolyzed PVAc (i.e., poly(vinyl alcohol). The mechanical properties of the various aqueous-organic dispersions, as determined quantitatively by rheological investigations and qualitatively by their ease of removal from a solid surface (i.e., the so-called "peel-off" ability) have been tuned systematically by varying the amount of organic liquid, its structure, and the concentrations of borax and 80PVAc. The (11)B NMR studies demonstrate that the concentration of borate ions actively participating in cross-linking increases significantly with the amount of organic liquid in the mixture. The degree of cross-linking remains constant when the 80PVAc and borax concentrations are varied, as long as their ratios are kept constant. Some of the 80PVAc-borax dispersions have been tested successfully as cleaning agents on the surface of a 16th-17th century oil-on-wood painting by Lodovico Cardi, "Il Cigoli", that was covered by a brown patina and on the surface of a Renaissance wall painting by Vecchietta in Santa Maria della Scala, Siena, Italy, that had a degraded polyacrylate coating from a previous conservation treatment.

  7. Visualizing Dispersion Interactions

    Science.gov (United States)

    Gottschalk, Elinor; Venkataraman, Bhawani

    2014-01-01

    An animation and accompanying activity has been developed to help students visualize how dispersion interactions arise. The animation uses the gecko's ability to walk on vertical surfaces to illustrate how dispersion interactions play a role in macroscale outcomes. Assessment of student learning reveals that students were able to develop…

  8. Assessing the performance of dispersionless and dispersion-accounting methods: helium interaction with cluster models of the TiO2(110) surface.

    Science.gov (United States)

    de Lara-Castells, María Pilar; Stoll, Hermann; Mitrushchenkov, Alexander O

    2014-08-21

    As a prototypical dispersion-dominated physisorption problem, we analyze here the performance of dispersionless and dispersion-accounting methodologies on the helium interaction with cluster models of the TiO2(110) surface. A special focus has been given to the dispersionless density functional dlDF and the dlDF+Das construction for the total interaction energy (K. Pernal, R. Podeswa, K. Patkowski, and K. Szalewicz, Phys. Rev. Lett. 2009, 109, 263201), where Das is an effective interatomic pairwise functional form for the dispersion. Likewise, the performance of symmetry-adapted perturbation theory (SAPT) method is evaluated, where the interacting monomers are described by density functional theory (DFT) with the dlDF, PBE, and PBE0 functionals. Our benchmarks include CCSD(T)-F12b calculations and comparative analysis on the nuclear bound states supported by the He-cluster potentials. Moreover, intra- and intermonomer correlation contributions to the physisorption interaction are analyzed through the method of increments (H. Stoll, J. Chem. Phys. 1992, 97, 8449) at the CCSD(T) level of theory. This method is further applied in conjunction with a partitioning of the Hartree-Fock interaction energy to estimate individual interaction energy components, comparing them with those obtained using the different SAPT(DFT) approaches. The cluster size evolution of dispersionless and dispersion-accounting energy components is then discussed, revealing the reduced role of the dispersionless interaction and intramonomer correlation when the extended nature of the surface is better accounted for. On the contrary, both post-Hartree-Fock and SAPT(DFT) results clearly demonstrate the high-transferability character of the effective pairwise dispersion interaction whatever the cluster model is. Our contribution also illustrates how the method of increments can be used as a valuable tool not only to achieve the accuracy of CCSD(T) calculations using large cluster models but also to

  9. Fickian dispersion is anomalous

    Science.gov (United States)

    Cushman, John H.; O'Malley, Dan

    2015-12-01

    The thesis put forward here is that the occurrence of Fickian dispersion in geophysical settings is a rare event and consequently should be labeled as anomalous. What people classically call anomalous is really the norm. In a Lagrangian setting, a process with mean square displacement which is proportional to time is generally labeled as Fickian dispersion. With a number of counter examples we show why this definition is fraught with difficulty. In a related discussion, we show an infinite second moment does not necessarily imply the process is super dispersive. By employing a rigorous mathematical definition of Fickian dispersion we illustrate why it is so hard to find a Fickian process. We go on to employ a number of renormalization group approaches to classify non-Fickian dispersive behavior. Scaling laws for the probability density function for a dispersive process, the distribution for the first passage times, the mean first passage time, and the finite-size Lyapunov exponent are presented for fixed points of both deterministic and stochastic renormalization group operators. The fixed points of the renormalization group operators are p-self-similar processes. A generalized renormalization group operator is introduced whose fixed points form a set of generalized self-similar processes. Power-law clocks are introduced to examine multi-scaling behavior. Several examples of these ideas are presented and discussed.

  10. Aqueously Dispersed Silver Nanoparticle-Decorated Boron Nitride Nanosheets for Reusable, Thermal Oxidation-Resistant Surface Enhanced Raman Spectroscopy (SERS) Devices

    Science.gov (United States)

    Lin, Yi; Bunker, Christopher E.; Fernandos, K. A. Shiral; Connell, John W.

    2012-01-01

    The impurity-free aqueous dispersions of boron nitride nanosheets (BNNS) allowed the facile preparation of silver (Ag) nanoparticle-decorated BNNS by chemical reduction of an Ag salt with hydrazine in the presence of BNNS. The resultant Ag-BNNS nanohybrids remained dispersed in water, allowing convenient subsequent solution processing. By using substrate transfer techniques, Ag-BNNS nanohybrid thin film coatings on quartz substrates were prepared and evaluated as reusable surface enhanced Raman spectroscopy (SERS) sensors that were robust against repeated solvent washing. In addition, because of the unique thermal oxidation-resistant properties of the BNNS, the sensor devices may be readily recycled by short-duration high temperature air oxidation to remove residual analyte molecules in repeated runs. The limiting factor associated with the thermal oxidation recycling process was the Ostwald ripening effect of Ag nanostructures.

  11. Environmental law

    International Nuclear Information System (INIS)

    Bender, B.; Sparwasser, R.

    1988-01-01

    Environmental law is discussed exhaustively in this book. Legal and scientific fundamentals are taken into account, a systematic orientation is given, and hints for further information are presented. The book covers general environmental law, plan approval procedures, protection against nuisances, atomic law and radiation protection law, water protection law, waste management law, laws on chemical substances, conservation law. (HSCH) [de

  12. BaTiO{sub 3}–P(VDF-HFP) nanocomposite dielectrics—Influence of surface modification and dispersion additives

    Energy Technology Data Exchange (ETDEWEB)

    Ehrhardt, Claudia; Fettkenhauer, Christian [Institute of Chemistry, Martin-Luther-University Halle-Wittenberg, Kurt-Mothes-Straße 2, D-06120 Halle/Saale (Germany); Glenneberg, Jens [Interdisciplinary Centre of Materials Science, Martin-Luther-University Halle-Wittenberg, Heinrich-Damerow-Straße 4, D-06120 Halle/Saale (Germany); Münchgesang, Wolfram; Pientschke, Christoph [Institute of Physics, Martin-Luther-University Halle-Wittenberg, Von-Danckelmann-Platz 3, D-06120 Halle/Saale (Germany); Großmann, Thomas; Zenkner, Mandy [Institute of Chemistry, Martin-Luther-University Halle-Wittenberg, Kurt-Mothes-Straße 2, D-06120 Halle/Saale (Germany); Wagner, Gerald; Leipner, Hartmut S.; Buchsteiner, Alexandra [Interdisciplinary Centre of Materials Science, Martin-Luther-University Halle-Wittenberg, Heinrich-Damerow-Straße 4, D-06120 Halle/Saale (Germany); Diestelhorst, Martin; Lemm, Sebastian; Beige, Horst [Institute of Physics, Martin-Luther-University Halle-Wittenberg, Von-Danckelmann-Platz 3, D-06120 Halle/Saale (Germany); Ebbinghaus, Stefan G., E-mail: stefan.ebbinghaus@chemie.uni-halle.de [Institute of Chemistry, Martin-Luther-University Halle-Wittenberg, Kurt-Mothes-Straße 2, D-06120 Halle/Saale (Germany)

    2013-08-01

    Highlights: • Polymer composites were prepared using a sol–gel synthesized BaTiO{sub 3}. • BaTiO{sub 3} surface hydroxyle groups act as linkers for surfactant molecules. • The effect of chemical adjustment between surfactant and polymer host is studied. • A positive effect of an additional dispersant was found. • Dielectric properties of the resulting composite films are presented. -- Abstract: We report on BaTiO{sub 3}–polymer composites as dielectrics for film capacitors. BaTiO{sub 3} was synthesized by a sol–gel soft-chemistry method leading to spherical nanoparticles with a high degree of surface hydroxyl groups which turned out to be important for the bonding of surfactant molecules. As surfactants, n-octylphosphonic acid and 2,3,4,5,6-pentafluorobenzyl phosphonic acid were used to inhibit particle agglomeration and to improve the wetting behaviour with the polymer. The phosphonic acid-coated BaTiO{sub 3} nanoparticles were dispersed in solutions of poly(vinylidefluoride-co-hexafluoropropylene). Composite films were prepared by the spin-coating technique. A systematic study was performed on the influence of varying oxide fractions, different surfactants and the effect of additional dispersion aids such as sodium dodecyl sulphate or BYK-W 9010 on the quality and dielectric properties of the films obtained. The chemical adjustment of the 2,3,4,5,6-pentaflourobenzyl phosphonic acid within the fluorinated organic host form a more uniform particle distribution and increase relative permittivity of the resulting composite material compared to the unflourinated surfactant. Additionally, an enhancement of the relative permittivity can be realized by adding of dispersants. These two components can increase the relative permittivity by factor 5 compared to the pure polymer material.

  13. Shear wave velocity model beneath CBJI station West Java, Indonesia from joint inversion of teleseismic receiver functions and surface wave dispersion

    Science.gov (United States)

    Simanungkalit, R. H.; Anggono, T.; Syuhada; Amran, A.; Supriyanto

    2018-03-01

    Earthquake signal observations around the world allow seismologists to obtain the information of internal structure of the Earth especially the Earth’s crust. In this study, we used joint inversion of receiver functions and surface wave group velocities to investigate crustal structure beneath CBJI station in West Java, Indonesia. Receiver function were calculated from earthquakes with magnitude more than 5 and at distance 30°-90°. Surface wave group velocities were calculated using frequency time analysis from earthquakes at distance of 30°- 40°. We inverted shear wave velocity model beneath the station by conducting joint inversion from receiver functions and surface wave dispersions. We suggest that the crustal thickness beneath CBJI station, West Java, Indonesia is about 35 km.

  14. Selective Dispersive Solid Phase Extraction of Ser-traline Using Surface Molecularly Imprinted Polymer Grafted on SiO2/Graphene Oxide

    Directory of Open Access Journals (Sweden)

    Faezeh Khalilian

    2017-01-01

    Full Text Available A surface molecularly imprinted dispersive solid phase extraction coupled with liquid chromatography–ultraviolet detection is proposed as a selective and fast clean-up technique for the determination of sertraline in biological sample. Surface sertraline-molecular imprinted polymer was grafted and synthesized on the SiO2/graphene oxide surface. Firstly SiO2 was coated on synthesized graphene oxide sheet using sol-gel technique. Prior to polymerization, the vinyl group was incorporated on to the surface of SiO2/graphene oxide to direct selective polymerization on the surface. Methacrylic acid, ethylene glycol dimethacrylate and ethanol were used as monomer, cross-linker and progen, respectively. Non-imprinted polymer was also prepared for comparing purposes. The properties of the molecular imprinted polymer were characterized using field emission-scanning electron microscopy and Fourier transform infrared spectroscopy methods. The surface molecular imprinted polymer was utilized as an adsorbent of dispersive solid phase extraction for separation and preconcentration of sertraline. The effects of the different parameters influencing the extraction efficiency, such as sample pH were investigated and optimized. The specificity of the molecular imprinted polymer over the non-imprinted polymer was examined in absence and presence of competitive drugs. Sertraline calibration curve showed linearity in the ranges 1–500 µg L-1. The limits of detection and quantification under optimized conditions were obtained 0.2 and 0.5 µg L-1. The within-day and between-day relative standard deviations (n=3 were 4.3 and 7.1%, respectively. Furthermore, the relative recoveries for spiked biological samples were above 92%.

  15. Effect of bleaching agents having a neutral pH on the surface of mineral trioxide aggregate using electron microscopy and energy dispersive X-ray microanalysis

    Science.gov (United States)

    Kazia, Nooh; Suvarna, Nithin; Shetty, Harish Kumar; Kumar, Pradeep

    2016-01-01

    Aim: To investigate the effect of bleaching agents having a neutral pH on the surface of mineral trioxide aggregate (MTA) used as a coronal seal material for nonvital bleaching, beneath the bleaching agent, with the help of energy dispersive X-ray microanalysis and scanning electron microscopy (SEM). Materials and Methods: Six samples of plastic tubes filled with white MTA (Angelus white) were kept in 100% humidity for 21 days. Each sample was divided into 2 and made into 12 samples. These were then divided into three groups. Group A was exposed to Opalescence Boost 40% hydrogen peroxide (HP) (Ultradent). Group B to Opalescence 10% carbamide peroxide (Ultradent) and Group C (control group) not exposed to any bleaching agent. After recommended period of exposure to bleaching agents according to manufacturers’ instructions, the samples were observed under SEM with an energy dispersive X-ray microanalysis system (JSM-6380 LA). Results: There were no relevant changes in color and no statistically significant surface structure changes of the MTA in both the experimental groups. Conclusion: The present findings suggest that even high concentration HP containing bleaching agents with neutral pH can be used on the surface of MTA without causing structural changes. The superior sealing ability of MTA and the high alkalinity would prevent cervical resorption postbleaching. PMID:27656061

  16. The Effects of Land Surface Heating And Roughness Elements on the Structure and Scaling Laws of Atmospheric Boundary Layer Turbulence

    Science.gov (United States)

    Ghannam, Khaled

    The atmospheric boundary-layer is the lowest 500-2000 m of the Earth's atmosphere where much of human life and ecosystem services reside. This layer responds to land surface (e.g. buoyancy and roughness elements) and slowly evolving free tropospheric (e.g. temperature and humidity lapse rates) conditions that arguably mediate and modulate biosphere-atmosphere interactions. Such response often results in spatially- and temporally-rich turbulence scales that continue to be the subject of inquiry given their significance to a plethora of applications in environmental sciences and engineering. The work here addresses key aspects of boundary layer turbulence with a focus on the role of roughness elements (vegetation canopies) and buoyancy (surface heating) in modifying the well-studied picture of shear-dominated wall-bounded turbulence. A combination of laboratory channel experiments, field experiments, and numerical simulations are used to explore three distinct aspects of boundary layer turbulence. These are: • The concept of ergodicity in turbulence statistics within canopies: It has been long-recognized that homogeneous and stationary turbulence is ergodic, but less is known about the effects of inhomogeneity introduced by the presence of canopies on the turbulence statistics. A high resolution (temporal and spatial) flume experiment is used here to test the convergence of the time statistics of turbulent scalar concentrations to their ensemble (spatio-temporal) counterpart. The findings indicate that within-canopy scalar statistics have a tendency to be ergodic, mostly in shallow layers (close to canopy top) where the sweeping flow events appear to randomize the statistics. Deeper layers within the canopy are dominated by low-dimensional (quasi-deterministic) von Karman vortices that tend to break ergodicity. • Scaling laws of turbulent velocity spectra and structure functions in near-surface atmospheric turbulence: the existence of a logarithmic scaling in the

  17. Using the acoustic-pulse conservation law in estimating the energy of surface acoustic sources by remote sounding

    Science.gov (United States)

    Kulichkov, S. N.; Popov, O. Ye.; Mishenin, A. A.; Chunchuzov, I. P.; Chkhetiani, O. G.; Tsybulskaya, N. D.

    2017-11-01

    The atmospheric effect on the characteristics of infrasonic signals from explosions has been studied. New methods have been proposed to remotely estimate the energy of explosions using the data of infrasonic wave registration. One method is based on the law of conservation of acoustic pulse I, which is equal to the product of the wave profile area S/2 of the studied infrasonic signal and the distance to the source E I [kt] = 1.38 × 10-10 (I [kg/s])1.482. The second method is based on the relationship between the explosion energy and the dominant period T of the recorded signal, ET [kt] =1.02 × ( T [s]2/σ)3/2, where σ is a dimensionless distance used for determining the degree of manifestation of nonlinear effects in the propagation of sound along ray trajectories. When compared to the conventional E W (Whitaker's) relation, the advantage of the EI relation is that it can be used for pulsed sources located at an arbitrary height over the land surface and having an arbitrary form of the initial-pulse profile and for any type of infrasonic arrivals. A distinctive feature of the expression for E T is that the atmospheric effect on the characteristics of recorded infrasonic signals is explicitly taken into account. These methods have been tested using infrasonic data recorded at a distance of 322 km from the sources (30 explosions caused by a fire that occurred at the Pugachevo armory in Udmurtia on June 2, 2011). For the same explosion, empirical relations have been found between energy values obtained by different methods: E I = 1.107 × E W , E T = 2.201 × E I .

  18. Facile preparation of water dispersible polypyrrole nanotube-supported silver nanoparticles for hydrogen peroxide reduction and surface-enhanced Raman scattering

    International Nuclear Information System (INIS)

    Peng Yingjing; Qiu Lihua; Pan Congtao; Wang Cancan; Shang Songmin; Yan Feng

    2012-01-01

    Water dispersible polypyrrole nanotube/silver nanoparticle hybrids (PPyNT-COOAgNP) were synthesized via a cation-exchange method. The approach involves the surface functionalization of PPyNTs with carboxylic acid groups (-COOH), and cation-exchange with silver ions (Ag + ) and followed by the reduction of metal ions. The morphology and optical properties of the produced PPyNT-COOAgNP nanohybrids were characterized by transmission electron microscopy (TEM), Fourier transform infrared (FT-IR) spectrometer, and UV–vis spectroscopy. The as-prepared PPyNT-COOAgNP nanohybrids exhibited well-defined response to the reduction of hydrogen peroxide, and as extremely suitable substrates for surface-enhanced Raman spectroscopy (SERS) with a high enhancement factor of 6.0 × 10 7 , and enabling the detection of 10 −12 M Rhodamine 6G solution.

  19. Influence of synthesis methods on tungsten dispersion, structural deformation, and surface acidity in binary WO3-ZrO2 system.

    Science.gov (United States)

    Cortés-Jácome, M A; Toledo, J A; Angeles-Chavez, C; Aguilar, M; Wang, J A

    2005-12-08

    WO3-ZrO2 catalysts were synthesized by precipitating the aqueous solutions of zirconium oxynitrate and ammonium metatungstate with ammonium hydroxide. The white slurry precipitate was treated under three different conditions. In the as-made materials, the amorphous phase was formed in the aged and refluxed samples, while well-crystallized tetragonal and monoclinic phases were obtained in the hydrothermally treated sample. The real amount of tungsten loaded in the samples was similar for the three samples, independently of the treatments; however, the tungsten surface atomic density in the annealed WO3-ZrO2 samples varied between 6 and 9 W atoms/nm2. Two different contrast types of aggregates were determined by scanning electron microscopy, the white particles which are rich in W, and the gray ones which are rich in zirconium; both of them were formed in the calcined solids prepared under aging or reflux condition. A very high dispersion of tungsten species on the zirconia surface was achieved in the hydrothermally treated sample. The degree of the interaction between WO(x) and ZrO2 surface strongly modified the Zr-O bond lengths and bond angles in the structure of tetragonal zirconia as proved by X-ray diffraction analysis and the Rietveld refinement. The catalyst obtained under hydrothermal condition exhibited the highest dispersion of tungsten species in the zirconia, which in turn causes strong structural deformation of the tetragonal ZrO2 phase responsible of the strongest surface acidity and, consequently, the optimum catalytic activity for n-hexane isomerization.

  20. Microstructural Characterization and Wear Behavior of Nano-Boride Dispersed Coating on AISI 304 Stainless Steel by Hybrid High Velocity Oxy-Fuel Spraying Laser Surface Melting

    Science.gov (United States)

    Sharma, Prashant; Majumdar, Jyotsna Dutta

    2015-07-01

    The current study concerns the detailed microstructural characterization and investigation of wear behavior of nano-boride dispersed coating developed on AISI 304 stainless steel by high velocity oxy-fuel spray deposition of nickel-based alloy and subsequent laser melting. There is a significant refinement and homogenization of microstructure with improvement in microhardness due to laser surface melting (1200 VHN as compared to 945 VHN of as-sprayed and 250 VHN of as-received substrate). The high temperature phase stability of the as-coated and laser melted surface has been studied by differential scanning calorimeter followed by detailed phase analysis at room and elevated temperature. There is a significant improvement in wear resistance of laser melted surface as compared to as-sprayed and the as-received one due to increased hardness and reduced coefficient of friction. The mechanism of wear has been investigated in details. Corrosion resistance of the coating in a 3.56 wt pct NaCl solution is significantly improved (4.43 E-2 mm/year as compared to 5 E-1 mm/year of as-sprayed and 1.66 mm/year of as-received substrate) due to laser surface melting as compared to as-sprayed surface.

  1. Activation and dissociation of CO2 on the (001), (011), and (111) surfaces of mackinawite (FeS): A dispersion-corrected DFT study.

    Science.gov (United States)

    Dzade, N Y; Roldan, A; de Leeuw, N H

    2015-09-07

    Iron sulfide minerals, including mackinawite (FeS), are relevant in origin of life theories, due to their potential catalytic activity towards the reduction and conversion of carbon dioxide (CO2) to organic molecules, which may be applicable to the production of liquid fuels and commodity chemicals. However, the fundamental understanding of CO2 adsorption, activation, and dissociation on FeS surfaces remains incomplete. Here, we have used density functional theory calculations, corrected for long-range dispersion interactions (DFT-D2), to explore various adsorption sites and configurations for CO2 on the low-index mackinawite (001), (110), and (111) surfaces. We found that the CO2 molecule physisorbs weakly on the energetically most stable (001) surface but adsorbs relatively strongly on the (011) and (111) FeS surfaces, preferentially at Fe sites. The adsorption of the CO2 on the (011) and (111) surfaces is shown to be characterized by significant charge transfer from surface Fe species to the CO2 molecule, which causes a large structural transformation in the molecule (i.e., forming a negatively charged bent CO2 (-δ) species, with weaker C-O confirmed via vibrational frequency analyses). We have also analyzed the pathways for CO2 reduction to CO and O on the mackinawite (011) and (111) surfaces. CO2 dissociation is calculated to be slightly endothermic relative to the associatively adsorbed states, with relatively large activation energy barriers of 1.25 eV and 0.72 eV on the (011) and (111) surfaces, respectively.

  2. Business Law

    DEFF Research Database (Denmark)

    Föh, Kennet Fischer; Mandøe, Lene; Tinten, Bjarke

    Business Law is a translation of the 2nd edition of Erhvervsjura - videregående uddannelser. It is an educational textbook for the subject of business law. The textbook covers all important topic?s within business law such as the Legal System, Private International Law, Insolvency Law, Contract law...

  3. Free convection heat and mass transfer in a power law fluid past an inclined surface with thermophoresis

    Directory of Open Access Journals (Sweden)

    Medhat M. Helal

    2013-10-01

    Full Text Available The problem of heat and mass transfer in a power law, two-dimensional, laminar, boundary layer flow of a viscous incompressible fluid over an inclined plate with heat generation and thermophoresis is investigated by the characteristic function method. The governing non-linear partial differential equations describing the flow and heat transfer problem are transformed into a set of coupled non-linear ordinary differential equation which was solved using Runge–Kutta shooting method. Exact solutions for the dimensionless temperature and concentration profiles, are presented graphically for different physical parameters and for the different power law exponents 0  0.5.

  4. Hydrodynamic dispersion

    International Nuclear Information System (INIS)

    Pryce, M.H.L.

    1985-01-01

    A dominant mechanism contributing to hydrodynamic dispersion in fluid flow through rocks is variation of travel speeds within the channels carrying the fluid, whether these be interstices between grains, in granular rocks, or cracks in fractured crystalline rocks. The complex interconnections of the channels ensure a mixing of those parts of the fluid which travel more slowly and those which travel faster. On a macroscopic scale this can be treated statistically in terms of the distribution of times taken by a particle of fluid to move from one surface of constant hydraulic potential to another, lower, potential. The distributions in the individual channels are such that very long travel times make a very important contribution. Indeed, while the mean travel time is related to distance by a well-defined transport speed, the mean square is effectively infinite. This results in an asymmetrical plume which differs markedly from a gaussian shape. The distribution of microscopic travel times is related to the distribution of apertures in the interstices, or in the microcracks, which in turn are affected in a complex way by the stresses acting on the rock matrix

  5. Well-dispersed CoS nanoparticles on a functionalized graphene nanosheet surface: a counter electrode of dye-sensitized solar cells.

    Science.gov (United States)

    Miao, Xiaohuan; Pan, Kai; Wang, Guofeng; Liao, Yongping; Wang, Lei; Zhou, Wei; Jiang, Baojiang; Pan, Qingjiang; Tian, Guohui

    2014-01-07

    With a facile electrophoretic deposition and chemical bath process, CoS nanoparticles have been uniformly dispersed on the surface of the functionalized graphene nanosheets (FGNS). The composite was employed as a counter electrode of dye-sensitized solar cells (DSSCs), which yielded a power conversion efficiency of 5.54 %. It is found that this efficiency is higher than those of DSSCs based on the non-uniform CoS nanoparticles on FGNS (4.45 %) and built on the naked CoS nanoparticles (4.79 %). The achieved efficiency of our cost-effective DSSC is also comparable to that of noble metal Pt-based DSSC (5.90 %). Our studies have revealed that both the exceptional electrical conductivity of the FGNS and the excellent catalytic activity of the CoS nanoparticles improve the conversion efficiency of the uniformly FGNS-CoS composite counter electrode. The electrochemical impedance spectra, cyclic voltammetry, and Tafel polarization have evidenced the best catalytic activity and the fastest electron transport. Additionally, the dispersion condition of CoS nanoparticles on FGNS plays an important role for catalytic reduction of I3 (-) . Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. The effect of holes in the dispersion relation of propagative surface plasmon modes of nanoperforated semitransparent metallic films

    Energy Technology Data Exchange (ETDEWEB)

    Kekesi, R., E-mail: renata.kekesi@csic.es; Meneses-Rodríguez, D.; García-Pérez, F.; González, M. U.; García-Martín, A.; Cebollada, A.; Armelles, G., E-mail: gaspar@imm.cnm.csic.es [IMM-Instituto de Microelectrónica de Madrid (CNM-CSIC), Isaac Newton 8, PTM, E-28760 Tres Cantos, Madrid (Spain)

    2014-10-07

    We have analysed the effect that holes have on the properties of propagative surface plasmon modes in semitransparent nanoperforated Au films. The modes have been excited in Kretschmann configuration. Contrary to continuous films, where only one mode is excited, two modes are observed in Au nanohole array. The origin of this different behavior is discussed using effective optical properties for the nanoperforated films. The presence of the holes affects the effective optical constants of the membranes in two ways: it changes the contribution of the free electrons, and it gives rise to a localized transition due to a hole induced plasmon resonance. This localized transition interacts with the propagative surface plasmon modes, originating the two detected modes.

  7. Hydrodynamic disperser

    Energy Technology Data Exchange (ETDEWEB)

    Bulatov, A.I.; Chernov, V.S.; Prokopov, L.I.; Proselkov, Yu.M.; Tikhonov, Yu.P.

    1980-01-15

    A hydrodynamic disperser is suggested which contains a housing, slit nozzles installed on a circular base arranged opposite from each other, resonators secured opposite the nozzle and outlet sleeve. In order to improve the effectiveness of dispersion by throttling the flow, each resonator is made in the form of a crimped plate with crimpings that decrease in height in a direction towards the nozzle.

  8. A Law of Comparative Judgment.

    Science.gov (United States)

    Thurstone, L. L.

    1994-01-01

    The law of comparative judgment is described, and applications in the measurement of psychological values are reviewed. The law defines the psychological continuum and expresses the experimentally observed proportion of judgments as a function of scale values of stimuli, their respective discriminal dispersions, and the correlation between paired…

  9. A surface energy-budget model coupled with a Skewed Puff Model for investigating the dispersion of radionuclides in a sub-tropical area of Brazil

    International Nuclear Information System (INIS)

    Oliveira, A.P.; Soares, J.; Tirabassi, T.; Rizza, U.

    1998-01-01

    An air pollution model (Skewed Puff Model, SPM) based on the Monin-Obukhov similarity theory was applied to investigate the atmospheric dispersion of radionuclides at Ipero' in Brazil, the location of a nuclear industrial installation. The SPM numerical simulation were carried out using an input 5-minute averaged wind speed and direction observed at 11. m, friction velocity and the Monin-Obukhov length supplied by the surface energy-budget model, along with PBL height, estimated for the daytime. The agreement between the observed and simulated sensible and latent heat fluxes, friction velocity and the Monin-Obukhov length, within a level of confidence of 99.9% indicates that the internal parameters chosen for the surface energy-budget model are representative of the interface soil-vegetation conditions at Ipero'. The mean concentration field at the surface was estimated assuming that a hypothetical accident at Ipero' produced a continuous emission from a 10 m high point source for 18 hours during the summer of 1993 and of 36 hours during the winter of 1992. The results indicated that, in the case of an accident, the highest concentration values are located near to the source and most of the contaminated area is within a 5 km range, in both seasons. The shape of the contaminated area is defined by the wind and speed pattern

  10. Environmental law

    International Nuclear Information System (INIS)

    Ketteler, G.; Kippels, K.

    1988-01-01

    In section I 'Basic principles' the following topics are considered: Constitutional-legal aspects of environmental protection, e.g. nuclear hazards and the remaining risk; European environmental law; international environmental law; administrative law, private law and criminal law relating to the environment; basic principles of environmental law, the instruments of public environmental law. Section II 'Special areas of law' is concerned with the law on water and waste, prevention of air pollution, nature conservation and care of the countryside. Legal decisions and literature up to June 1988 have been taken into consideration. (orig./RST) [de

  11. Four-year survey of dissolved/dispersed petroleum hydrocarbons on surface waters of Admiralty Bay, King George Island, Antarctica

    Directory of Open Access Journals (Sweden)

    Márcia Caruso Bícego

    2003-01-01

    Full Text Available Seawater from 8 stations in Admiralty Bay was systematically sampled during the summer of 1994, 1995, 1996 and 1997 and analyzed by spectrofluorimetry to measure dissolved/dispersed petroleum hydrocarbons (DDPHs. The purpose of this study was to detect some temporal and spatial changes in terms of oil contamination of the region. The results indicate low levels of oil pollution with relatively high concentrations near the research stations located in the study area. During the summers of 1995 and 1996 the average concentrations for individual stations were low and below of 0.50 ¼g.L-1. Summers of 1994 and 1997 had relatively higher average concentrations (up to 1.57 ¼g.L-1, mainly in front of Arctowski and Ferraz Research Stations.Amostras de água na Baía do Almirantado, Península Antártica, foram sistematicamente coletadas em 8 estações durante os verões de 1994 a 1997 onde foram analisados hidrocarbonetos do petróleo dispersos e dissolvidos por espectrofluorescência. O objetivo foi avaliar variações temporais e espaciais em termos de contaminação por óleo na região. Os resultados em geral indicam baixos níveis de poluição embora tenham sido verificadas algumas concentrações relativamente maiores nas proximidades das estações de pesquisa fixadas na região de estudo. Durante os anos de 1995 e 1996 a média das concentrações foram baixas e menores que 0,50 ¼g.L-1 para os pontos individuais. Os verões de 1994 e 1997 tiveram concentrações médias mais elevadas (até 1,57 ¼g.L-1, e os maiores valores foram nas proximidades das estações brasileira e polonesa.

  12. Effects of Lateral Heterogeneity and Power Law Rheology on Glacially Induced Surface Motion and Gravity Rate of Change

    Science.gov (United States)

    Wu, P.; Wang, H.; van der Wal, W.

    2006-12-01

    Modern geodetic measurements from GPS, satellite altimetry, tide-gauges, Satellite Laser Ranging (SLR) and space-borne gravimetry (such as GRACE) have been used to monitor global change. Since these measurements contain contributions from glacial isostatic adjustment (GIA) and other tectonic processes, they must be modeled and removed in order to observe current climate change. In the past, most GIA models assumed that the earth is laterally homogeneous and the rheology is linear. The aim of this paper is to investigate the effects of lateral heterogeneity and Power-Law rheology on GIA induced land uplift rate, horizontal velocities, relative sealevels, J-dot and the secular gravity rate of change in the southern part of Hudson Bay, which is detected by the GRACE mission. Here, GIA is modeled with a spherical, self-gravitating, compressible viscoelastic, laterally heterogeneous earth using the Finite-Element Method. The effect of gravitationally self-consistent sea levels in realistic oceans is also included. Lateral variations in mantle viscosities and lithospheric thickness are inferred from the seismic tomography model S20A using well known scaling relationships. Power-Law rheologies in the whole mantle or in combination with linear rheologies in the upper or lower mantle are also investigated. Both ICE-5G and ICE-4G deglaciation models are used to investigate their effect on the pattern of rebound. Preliminary results show that both lateral heterogeneity and power-law rheology have strong effects on the direction and magnitude of horizontal velocities. The effects of lateral heterogeneity and power-law rheology are also large enough to be detected in land uplift rate, relative sealevels, J-dot and gravity rate of change. Their implication on observing the effects of global warming will also be discussed.

  13. Criminal Law

    DEFF Research Database (Denmark)

    Langsted, Lars Bo; Garde, Peter; Greve, Vagn

    <> book contains a thorough description of Danish substantive criminal law, criminal procedure and execution of sanctions. The book was originally published as a monograph in the International Encyclopaedia of Laws/Criminal Law....... book contains a thorough description of Danish substantive criminal law, criminal procedure and execution of sanctions. The book was originally published as a monograph in the International Encyclopaedia of Laws/Criminal Law....

  14. World law

    Directory of Open Access Journals (Sweden)

    Harold J. Berman

    1999-03-01

    Full Text Available In the third millennium of the Christian era, which is characterised by the emergence of a world economy and eventually a world society, the concept of world law is needed to embrace not only the traditional disciplines of public international law, and comparative law, but also the common underlying legal principles applicable in world trade, world finance, transnational transfer of technology and other fields of world economic law, as well as in such emerging fields as the protection of the world's environment and the protection of universal human rights. World law combines inter-state law with the common law of humanity and the customary law of various world communities.

  15. Well-dispersed Ni nanoclusters on the surfaces of MFI nanosheets as highly efficient and selective catalyst for the hydrogenation of naphthalene to tetralin

    Science.gov (United States)

    Gong, Pengyu; Li, Baoshan; Kong, Xianglong; Liu, Jianjun; Zuo, Shengli

    2017-11-01

    One of the challenges in material science has been to design and prepare highly efficient and selective catalysts for target reactions. Here we demonstrate a one-pot hydrothermal synthesis of hierarchical MFI nanosheets with nickel species chemically bonded on the outer surfaces. It turns out that the growth and morphologies of self-pillared MFI nanosheets are affected by Ni content, and the thickness of MFI nanosheets are determined to be 2.3 nm or 3.0 nm. Specially, the bonded Ni on the outer surfaces can effectively prevent adjacent nanosheets from forming new Sisbnd Osbnd Si bonds, and in conjunction with the self-pillared structure, can hamper complete collapse of Ni-MFI-NSs during calcination. In naphthalene hydrogenation, the separated Ni species are previously reduced to highly-dispersed metallic Ni nanoclusters with size below 1.6 nm, which are highly active for hydrogenation. And the hierarchical porosity of Ni-MFI-NSs significantly enhances the diffusion of substrates and the accessibility of active sites. As a result, Ni-MFI-NSs achieve 100% selectivity for tetralin and 84.9% conversion of naphthalene with Ni content of only 4.2 wt%. Furthermore, the gradually enlarged Ni nanoparticles cause the decline of catalytic activities of catalysts.

  16. Quartz dissolution. I - Negative crystal experiments and a rate law. II - Theory of rough and smooth surfaces

    Science.gov (United States)

    Gratz, Andrew J.; Bird, Peter

    1993-01-01

    The range of the measured quartz dissolution rates, as a function of temperature and pOH, extent of saturation, and ionic strength, is extended to cover a wider range of solution chemistries, using the negative crystal methodology of Gratz et al. (1990) to measure the dissolution rate. A simple rate law describing the quartz dissolution kinetics above the point of zero charge of quartz is derived for ionic strengths above 0.003 m. Measurements were performed on some defective crystals, and the mathematics of step motion was developed for quartz dissolution and was compared with rough-face behavior using two different models.

  17. Correction: Ga[OSi(OtBu)3]3·THF, a thermolytic molecular precursor for high surface area gallium-containing silica materials of controlled dispersion and stoichiometry.

    Science.gov (United States)

    Dombrowski, James P; Johnson, Gregory R; Bell, Alexis T; Tilley, T Don

    2016-11-22

    Correction for 'Ga[OSi(O t Bu) 3 ] 3 ·THF, a thermolytic molecular precursor for high surface area gallium-containing silica materials of controlled dispersion and stoichiometry' by James P. Dombrowski et al., Dalton Trans., 2016, 45, 11025-11034.

  18. Law Studies

    Directory of Open Access Journals (Sweden)

    G. P. Tolstopiatenko

    2014-01-01

    Full Text Available At the origin of the International Law Department were such eminent scientists, diplomats and teachers as V.N. Durdenevsky, S.B. Krylov and F.I. Kozhevnikov. International law studies in USSR and Russia during the second half of the XX century was largely shaped by the lawyers of MGIMO. They had a large influence on the education in the international law in the whole USSR, and since 1990s in Russia and other CIS countries. The prominence of the research of MGIMO international lawyers was due to the close connections with the international practice, involving international negotiations in the United Nations and other international fora, diplomatic conferences and international scientific conferences. This experience is represented in the MGIMO handbooks on international law, which are still in demand. The Faculty of International Law at MGIMO consists of seven departments: Department of International Law, Department of Private International and Comparative Law; Department of European Law; Department of Comparative Constitutional Law; Department of Administrative and Financial Law; Department of Criminal Law, Department Criminal Procedure and Criminalistics. Many Russian lawyers famous at home and abroad work at the Faculty, contributing to domestic and international law studies. In 1947 the Academy of Sciences of the USSR published "International Law" textbook which was the first textbook on the subject in USSR. S.B. Krylov and V.N. Durdenevsky were the authors and editors of the textbook. First generations of MGIMO students studied international law according to this textbook. All subsequent books on international law, published in the USSR, were based on the approach to the teaching of international law, developed in the textbook by S.B. Krylov and V.N. Durdenevsky. The first textbook of international law with the stamp of MGIMO, edited by F.I. Kozhevnikov, was published in 1964. This textbook later went through five editions in 1966, 1972

  19. Protein-Flavonoid Interaction Studies by a Taylor Dispersion Surface Plasmon Resonance (SPR Technique: A Novel Method to Assess Biomolecular Interactions

    Directory of Open Access Journals (Sweden)

    Preejith P. Vachali

    2016-02-01

    Full Text Available Flavonoids are common polyphenolic compounds widely distributed in fruits and vegetables. These pigments have important pharmacological relevance because emerging research suggests possible anti-cancer and anti-inflammatory properties as well other beneficial health effects. These compounds are relatively hydrophobic molecules, suggesting the role of blood transport proteins in their delivery to tissues. In this study, we assess the binding interactions of four flavonoids (kaempferol, luteolin, quercetin, and resveratrol with human serum albumin (HSA, the most abundant protein in the blood, and with glutathione S-transferase pi isoform-1 (GSTP1, an enzyme with well-characterized hydrophobic binding sites that plays an important role in detoxification of xenobiotics with reduced glutathione, using a novel Taylor dispersion surface plasmon resonance (SPR technique. For the first time, HSA sites revealed a high-affinity binding site for flavonoid interactions. Out of the four flavonoids that we examined, quercetin and kaempferol showed the strongest equilibrium binding affinities (KD of 63 ± 0.03 nM and 37 ± 0.07 nM, respectively. GSTP1 displayed lower affinities in the micromolar range towards all of the flavonoids tested. The interactions of flavonoids with HSA and GSTP1 were studied successfully using this novel SPR assay method. The new method is compatible with both kinetic and equilibrium analyses.

  20. A statistical assessment of seismic models of the U.S. continental crust using Bayesian inversion of ambient noise surface wave dispersion data

    Science.gov (United States)

    Olugboji, T. M.; Lekic, V.; McDonough, W.

    2017-07-01

    We present a new approach for evaluating existing crustal models using ambient noise data sets and its associated uncertainties. We use a transdimensional hierarchical Bayesian inversion approach to invert ambient noise surface wave phase dispersion maps for Love and Rayleigh waves using measurements obtained from Ekström (2014). Spatiospectral analysis shows that our results are comparable to a linear least squares inverse approach (except at higher harmonic degrees), but the procedure has additional advantages: (1) it yields an autoadaptive parameterization that follows Earth structure without making restricting assumptions on model resolution (regularization or damping) and data errors; (2) it can recover non-Gaussian phase velocity probability distributions while quantifying the sources of uncertainties in the data measurements and modeling procedure; and (3) it enables statistical assessments of different crustal models (e.g., CRUST1.0, LITHO1.0, and NACr14) using variable resolution residual and standard deviation maps estimated from the ensemble. These assessments show that in the stable old crust of the Archean, the misfits are statistically negligible, requiring no significant update to crustal models from the ambient noise data set. In other regions of the U.S., significant updates to regionalization and crustal structure are expected especially in the shallow sedimentary basins and the tectonically active regions, where the differences between model predictions and data are statistically significant.

  1. The ion exchange properties and equilibrium constants of Li+, Na+ and K+ on zirconium phosphate highly dispersed on a cellulose acetate fibers surface

    Directory of Open Access Journals (Sweden)

    Borgo Claudemir Adriano

    2004-01-01

    Full Text Available Highly dispersed zirconium phosphate was prepared by reacting celullose acetate/ZrO2 (ZrO2 = 11 wt%, 1.0 mmol g-1 of zirconium atom per gram of the material with phosphoric acid. High power decoupling magic angle spinning (HPDEC-MAS 31P NMR and X-ray photoelectron spectroscopy data indicated that HPO4(2- is the species present on the membrane surface. The specific concentration of acidic centers, determined by ammonia gas adsorption, is 0.60 mmol g-1. The ion exchange capacities for Li+, Na+ and K+ ions were determined from ion exchange isotherms at 298 K and showed the following values (in mmol g-1: Li+= 0.05, Na+= 0.38 and K+= 0.57. Due to the strong cooperative effect, the H+/Na+ and H+/K+ ion exchange is of non ideal nature. These ion exchange equilibria were treated with the use of models of fixed tridentate centers, which consider the surface of the sorbent as polyfunctional sorption centers. Both the observed ion exchange capacities with respect to the alkaline metal ions and the equilibrium constants are discussed by taking into consideration the sequence of the ionic hydration radii for Li+, Na+ and K+. The matrix affinity for the ions decreases with increasing the cations hydration radii from K+ to Li+. The high values of the separation factors S Na+/Li+ and S K+/Li+ (up to several hundreds support the application of this material for the quantitative separation of Na+ and K+ from Li+ from a mixture containing these three ions.

  2. Turbulent dispersion of many particles

    Science.gov (United States)

    Pratt, J.; Busse, A.; Muller, W. C.

    2017-12-01

    We demonstrate the utility of the convex hull to analyze dispersion of groups of many Lagrangian tracer particles in turbulence. We examine dispersion in turbulent flows driven by convection, relevant to geophysical flows and the spread of contaminants in the atmosphere, and in turbulent flows affected by magnetic fields, relevant to stellar winds and stellar interiors. Convex hull analysis can provide new information about local dispersion, in the form of the surface area and volume for a cluster of particles. We use dispersive information to examine the local anisotropy that occurs in these turbulent settings, and to understand fundamental characteristics of heat transfer and the small-scale dynamo.

  3. Environmental law

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This pocketbook contains major federal regulations on environmental protection. They serve to protect and cultivate mankind's natural foundations of life, to preserve the environment. The environmental law is devided as follows: Constitutional law on the environment, common administrative law on the environment, special administrative law on the environment including conservation of nature and preservation of rural amenities, protection of waters, waste management, protection against nuisances, nuclear energy and radiation protection, energy conservation, protection against dangerous substances, private law relating to the environment, criminal law relating to the environment. (HSCH) [de

  4. International law

    CERN Document Server

    Shaw, Malcolm N

    2017-01-01

    International Law is the definitive and authoritative text on the subject, offering Shaw's unbeatable combination of clarity of expression and academic rigour and ensuring both understanding and critical analysis in an engaging and authoritative style. Encompassing the leading principles, practice and cases, and retaining and developing the detailed references which encourage and assist the reader in further study, this new edition motivates and challenges students and professionals while remaining accessible and engaging. Fully updated to reflect recent case law and treaty developments, this edition contains an expanded treatment of the relationship between international and domestic law, the principles of international humanitarian law, and international criminal law alongside additional material on international economic law.

  5. The mechanism and universal scaling law of the contact line friction for the Cassie-state droplets on nanostructured ultrahydrophobic surfaces.

    Science.gov (United States)

    Zhao, Lei; Cheng, Jiangtao

    2018-04-05

    Besides the Wenzel state, liquid droplets on micro/nanostructured surfaces can stay in the Cassie state and consequently exhibit intriguing characteristics such as a large contact angle, small contact angle hysteresis and exceptional mobility. Here we report molecular dynamics (MD) simulations of the wetting dynamics of Cassie-state water droplets on nanostructured ultrahydrophobic surfaces with an emphasis on the genesis of the contact line friction (CLF). From an ab initio perspective, CLF can be ascribed to the collective effect of solid-liquid retarding and viscous damping. Solid-liquid retarding is related to the work of adhesion, whereas viscous damping arises from the viscous force exerted on the liquid molecules within the three-phase (liquid/vapor/solid) contact zone. In this work, a universal scaling law is derived to generalize the CLF on nanostructured ultrahydrophobic surfaces. With the decreasing fraction of solid-liquid contact (i.e., the solid fraction), CLF for a Cassie-state droplet gets enhanced due to the fact that viscous damping is counter-intuitively intensified while solid-liquid retarding remains unchanged. Nevertheless, the overall friction between a Cassie-state droplet and the structured surface is indeed reduced since the air cushion formed in the interstices of the surface roughness underneath the Cassie-state droplet applies negligible resistance to the contact line. Our results have revealed the genesis of CLF from an ab initio perspective, demonstrated the effects of surface structures on a moving contact line and justified the critical role of CLF in the analysis of wetting-related situations.

  6. Dispersion and Solvation Effects on the Structure and Dynamics of N719 Adsorbed to Anatase Titania (101) Surfaces in Room-Temperature Ionic Liquids: An ab Initio Molecular Simulation Study

    KAUST Repository

    Byrne, Aaron

    2015-12-24

    Ab initio, density functional theory (DFT)-based molecular dynamics (MD) has been carried out to investigate the effect of explicit solvation on the dynamical and structural properties of a [bmim][NTf2] room-temperature ionic liquid (RTIL), solvating a N719 sensitizing dye adsorbed onto an anatase titania (101) surface. The effect of explicit dispersion on the properties of this dye-sensitized solar cell (DSC) interface has also been studied. Upon inclusion of dispersion interactions in simulations of the solvated system, the average separation between the cations and anions decreases by 0.6 Å; the mean distance between the cations and the surface decreases by about 0.5 Å; and the layering of the RTIL is significantly altered in the first layer surrounding the dye, with the cation being on average 1.5 Å further from the center of the dye. Inclusion of dispersion effects when a solvent is not explicitly included (to dampen longer-range interactions) can result in unphysical "kinking" of the adsorbed dye\\'s configuration. The inclusion of solvent shifts the HOMO and LUMO levels of the titania surface by +3 eV. At this interface, the interplay between the effects of dispersion and solvation combines in ways that are often subtle, such as enhancement or inhibition of specific vibrational modes. © 2015 American Chemical Society.

  7. World law

    OpenAIRE

    Harold J. Berman; Robert W. Woodruff; James Barr Ames

    1999-01-01

    In the third millennium of the Christian era, which is characterised by the emergence of a world economy and eventually a world society, the concept of world law is needed to embrace not only the traditional disciplines of public international law, and comparative law, but also the common underlying legal principles applicable in world trade, world finance, transnational transfer of technology and other fields of world economic law, as well as in such emerging fields as the protection of the ...

  8. 25 CFR 11.442 - Riot; failure to disperse.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Riot; failure to disperse. 11.442 Section 11.442 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR LAW AND ORDER COURTS OF INDIAN OFFENSES AND LAW AND ORDER CODE Criminal Offenses § 11.442 Riot; failure to disperse. (a) A person is guilty of riot, a...

  9. Snell's Law for Spin Waves

    Science.gov (United States)

    Stigloher, J.; Decker, M.; Körner, H. S.; Tanabe, K.; Moriyama, T.; Taniguchi, T.; Hata, H.; Madami, M.; Gubbiotti, G.; Kobayashi, K.; Ono, T.; Back, C. H.

    2016-07-01

    We report the experimental observation of Snell's law for magnetostatic spin waves in thin ferromagnetic Permalloy films by imaging incident, refracted, and reflected waves. We use a thickness step as the interface between two media with different dispersion relations. Since the dispersion relation for magnetostatic waves in thin ferromagnetic films is anisotropic, deviations from the isotropic Snell's law known in optics are observed for incidence angles larger than 25 ° with respect to the interface normal between the two magnetic media. Furthermore, we can show that the thickness step modifies the wavelength and the amplitude of the incident waves. Our findings open up a new way of spin wave steering for magnonic applications.

  10. Surface-Tuned Co3O4 Nanoparticles Dispersed on Nitrogen-Doped Graphene as an Efficient Cathode Electrocatalyst for Mechanical Rechargeable Zinc-Air Battery Application.

    Science.gov (United States)

    Singh, Santosh K; Dhavale, Vishal M; Kurungot, Sreekumar

    2015-09-30

    The most vital component of the fuel cells and metal-air batteries is the electrocatalyst, which can facilitate the oxygen reduction reaction (ORR) at a significantly reduced overpotential. The present work deals with the development of surface-tuned cobalt oxide (Co3O4) nanoparticles dispersed on nitrogen-doped graphene as a potential ORR electrocatalyst possessing some unique advantages. The thermally reduced nitrogen-doped graphene (NGr) was decorated with three different morphologies of Co3O4 nanoparticles, viz., cubic, blunt edged cubic, and spherical, by using a simple hydrothermal method. We found that the spherical Co3O4 nanoparticle supported NGr catalyst (Co3O4-SP/NGr-24h) has acquired a significant activity makeover to display the ORR activity closely matching with the state-of-the-art Pt supported carbon (PtC) catalyst in alkaline medium. Subsequently, the Co3O4-SP/NGr-24h catalyst has been utilized as the air electrode in a Zn-air battery, which was found to show comparable performance to the system derived from PtC. Co3O4-SP/NGr-24h catalyst has shown several hours of flat discharge profile at the discharge rates of 10, 20, and 50 mA/cm(2) with a specific capacity and energy density of ~590 mAh/g-Zn and ~840 Wh/kg-Zn, respectively, in the primary Zn-air battery system. In conjunction, Co3O4-SP/NGr-24h has outperformed as an air electrode in mechanical rechargeable Zn-air battery as well, which has shown consistent flat discharge profile with minimal voltage loss at a discharge rate of 50 mA/cm(2). The present results, thus demonstrate that the proper combination of the tuned morphology of Co3O4 with NGr will be a promising and inexpensive material for efficient and ecofriendly cathodes for Zn-air batteries.

  11. Fabrication of magnetic alginate beads with uniform dispersion of CoFe2O4 by the polydopamine surface functionalization for organic pollutants removal

    Science.gov (United States)

    Li, Xiaoli; Lu, Haijun; Zhang, Yun; He, Fu; Jing, Lingyun; He, Xinghua

    2016-12-01

    A simple and efficient method for production of magnetic composites by decorating CoFe2O4 with polydopamine (PDA) through oxidative polymerization of dopamine was conducted. Further, magnetic alginate beads with porous structure containing well-dispersed CoFe2O4-PDA were fabricated by ionic crosslinking technology. The resulting SA@CoFe2O4-PDA beads were characterized using scanning electron microscopy, Fourier transform infrared spectrometry, X-ray diffractometer, vibrating sample magnetometer and X-ray photoelectron spectroscopy. Adsorption potential of SA@CoFe2O4-PDA beads for organic dyes including Methylene Blue (MB), Crystal Violet (CV) and Malachite Green (MG) was evaluated. SA@CoFe2O4-PDA beads exhibited excellent adsorption performances due to the composite effect, large surface area and porous structure. Organic dyes could be removed from water solution with high efficiency in a wide pH range of 4.0-9.0. Moreover, it exhibited much higher adsorptivity towards MB and CV with the maximum adsorption capacities of 466.60 and 456.52 mg/g, respectively, which were much higher than that of MG (248.78 mg/g). Ca-electrolyte had obvious adverse effects on MB and CV adsorption than MG. FTIR and XPS demonstrated that carboxylate, catechol, hydroxyl and amine groups might be involved in adsorption of organic dyes. The characteristics of wide pH range, high adsorption capacity and convenient magnetic separation would make SA@CoFe2O4-PDA beads as effective adsorbent for removal of organic dyes from wastewater.

  12. Darwin's laws.

    Science.gov (United States)

    Haufe, Chris

    2012-03-01

    There is widespread agreement among contemporary philosophers of biology and philosophically-minded biologists that Darwin's insights about the intrusion of chance processes into biological regularities undermines the possibility of there being biological laws. Darwin made references to "designed laws." He also freely described some laws as having exceptions. This paper provides a philosophical analysis of the notion of scientific laws that was dominant in Darwin's time, and in all probability the one which he inherited. The analysis of laws is then used to show how it could have been natural for Darwin to believe in designed laws that had exceptions, and to highlight the continuity between the metaphysics of pre-Darwinian, Darwinian, and contemporary biological science. One important result is the removal of one motivation for the anti-laws sentiment in philosophy and biology. Copyright © 2011 Elsevier Ltd. All rights reserved.

  13. Communication: A combined periodic density functional and incremental wave-function-based approach for the dispersion-accounting time-resolved dynamics of {sup 4}He nanodroplets on surfaces: {sup 4}He/graphene

    Energy Technology Data Exchange (ETDEWEB)

    Lara-Castells, María Pilar de, E-mail: Pilar.deLara.Castells@csic.es [Instituto de Física Fundamental (C.S.I.C.), Serrano 123, E-28006 Madrid (Spain); Stoll, Hermann [Institut für Theoretische Chemie, Universität Stuttgart, D-70550 Stuttgart (Germany); Civalleri, Bartolomeo [Dipartimento di Chimica e Centro Interdipartimentale NIS, Universitá di Torino, Via P. Giuria 7, 10125 Torino (Italy); Causà, Mauro [Dipartimento di Ingegneria Chimica, dei Materiali e delle Produzioni Industriali, Universiá di Napoli Federico II, Piazzale Tecchio, 80126 Napoli (Italy); Voloshina, Elena [Humboldt-Universität zu Berlin, Institut für Chemie, Brook-Taylor-Str. 2, 12489 Berlin (Germany); Mitrushchenkov, Alexander O. [Université Paris-Est, Laboratoire Modélisation et Simulation Multi Echelle, MSME UMR 8208 CNRS, 5 bd Descartes, 77454 Marne-la-Vallée (France); Pi, Martí [Department ECM, Facultat de Física, and IN" 2UB, Universitat de Barcelona, Diagonal 645, E-08028 Barcelona (Spain)

    2014-10-21

    In this work we propose a general strategy to calculate accurate He–surface interaction potentials. It extends the dispersionless density functional approach recently developed by Pernal et al. [Phys. Rev. Lett. 103, 263201 (2009)] to adsorbate-surface interactions by including periodic boundary conditions. We also introduce a scheme to parametrize the dispersion interaction by calculating two- and three-body dispersion terms at coupled cluster singles and doubles and perturbative triples (CCSD(T)) level via the method of increments [H. Stoll, J. Chem. Phys. 97, 8449 (1992)]. The performance of the composite approach is tested on {sup 4}He/graphene by determining the energies of the low-lying selective adsorption states, finding an excellent agreement with the best available theoretical data. Second, the capability of the approach to describe dispersionless correlation effects realistically is used to extract dispersion effects in time-dependent density functional simulations on the collision of {sup 4}He droplets with a single graphene sheet. It is found that dispersion effects play a key role in the fast spreading of the {sup 4}He nanodroplet, the evaporation-like process of helium atoms, and the formation of solid-like helium structures. These characteristics are expected to be quite general and highly relevant to explain experimental measurements with the newly developed helium droplet mediated deposition technique.

  14. Rheological Characteristics of Fresh and Dried Okra Dispersions ...

    African Journals Online (AJOL)

    The rheological properties of fresh and dried okra dispersions were investigated at different temperatures using power-law model. Sun-dried and oven-dried okra dispersions were more viscous than the fresh okra dispersion. All samples exhibited pseudoplastic behaviour with flow indices of 0.220 ≤ n ≤ 0.319, 0.182 ≤ n ...

  15. Study of the processes of adsorption of amine-containing surface-active substance on the surface of Aluminum powder

    Directory of Open Access Journals (Sweden)

    Antonina Dyuryagina

    2012-03-01

    Full Text Available Equilibrium characteristics of adsorption on a surface of a pigment depending on concentration factors and temperature of the dispersive environment are defined. Kinetic laws of superficial activity of binary, threefold homogeneous and heterogeneous modeling systems are studied. The estimation of mechanisms of process of adsorption is carried out.

  16. UV curable aqueous dispersions for wood coatings

    International Nuclear Information System (INIS)

    Peeters, S.; Bleus, J.P.; Wang, Z.J.; Arceneaux, J. A.; Hall, J.

    1999-01-01

    In this paper the characterisation of aqueous dispersions of UV curable resins is described. Two types of dispersions were used: dispersions that are tacky after water evaporation and tack - free before cure dispersions. The physical and rheological properties of these products have been determined and the performance of these dispersions in various formulations, especially for wood applications has been studied. With these dispersions, it is possible to produce coatings having a good cure speed, good surface hardness and good solvent -, chemical - and water resistance

  17. Environmental law

    International Nuclear Information System (INIS)

    Kloepfer, M.

    1989-01-01

    This comprehensive reference book on environmental law and practice also is a valuable textbook for students specializing in the field. The entire law on pollution control and environmental protection is presented in an intelligent system, covering the latest developments in the Federal and Land legislation, public environmental law, and the related provisions in the fields of civil law and criminal law. The national survey is rounded up by information concerning the international environmental law, environmental law of the European Communities, and of other foreign countries as e.g. Austria and Switzerland. The author also reviews conditions in neighbouring fields such as technology and labour law, environmental economy, environmental policy. Special attention is given to current topics, as e.g. relating to genetic engineering, disused landfills or industrial sites, soil protection, transport of hazardous goods, liability for damage to forests, atomic energy law, and radiation protection law. The latest publishing dates of literature and court decisions considered in the book are in the first months of 1989. (RST) [de

  18. Stochastic differential equations and turbulent dispersion

    Science.gov (United States)

    Durbin, P. A.

    1983-01-01

    Aspects of the theory of continuous stochastic processes that seem to contribute to an understanding of turbulent dispersion are introduced and the theory and philosophy of modelling turbulent transport is emphasized. Examples of eddy diffusion examined include shear dispersion, the surface layer, and channel flow. Modeling dispersion with finite-time scale is considered including the Langevin model for homogeneous turbulence, dispersion in nonhomogeneous turbulence, and the asymptotic behavior of the Langevin model for nonhomogeneous turbulence.

  19. Lindy's Law

    Science.gov (United States)

    Eliazar, Iddo

    2017-11-01

    Aging means that as things grow old their remaining expected lifetimes lessen. Either faster or slower, most of the things we encounter in our everyday lives age with time. However, there are things that do quite the opposite - they anti-age: as they grow old their remaining expected lifetimes increase rather than decrease. A quantitative formulation of anti-aging is given by the so-called ;Lindy's Law;. In this paper we explore Lindy's Law and its connections to Pareto's Law, to Zipf's Law, and to socioeconomic inequality.

  20. Fabrication of magnetic alginate beads with uniform dispersion of CoFe{sub 2}O{sub 4} by the polydopamine surface functionalization for organic pollutants removal

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xiaoli, E-mail: lixiaoli@lzu.edu.cn [Gansu Key Laboratory for Environmental Pollution Prediction and Control, College of Earth and Environmental Sciences, Lanzhou University, Lanzhou 730000 (China); Lu, Haijun, E-mail: 784616040@qq.com [Gansu Key Laboratory for Environmental Pollution Prediction and Control, College of Earth and Environmental Sciences, Lanzhou University, Lanzhou 730000 (China); Zhang, Yun, E-mail: zhangyun@lzu.edu.cn [Institute of Biochemical Engineering & Environmental Technology, College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou 730000 (China); He, Fu, E-mail: hef15@lzu.edu.cn [Institute of Biochemical Engineering & Environmental Technology, College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou 730000 (China); Jing, Lingyun, E-mail: jingly12@lzu.edu.cn [Gansu Key Laboratory for Environmental Pollution Prediction and Control, College of Earth and Environmental Sciences, Lanzhou University, Lanzhou 730000 (China); He, Xinghua, E-mail: 466410250@qq.com [Institute of Biochemical Engineering & Environmental Technology, College of Chemistry and Chemical Engineering, Lanzhou University, Lanzhou 730000 (China)

    2016-12-15

    Highlights: • SA@CoFe{sub 2}O{sub 4}-PDA with magnetic particles and biopolymers were used for dye removal. • SA@CoFe{sub 2}O{sub 4}-PDA exhibited the synergistic effect. • High adsorption capacities and fast kinetics were obtained. • Cationic dyes could be removed with high efficiency in a wide pH range. • Possible mechanism of adsorption was investigated. - Abstract: A simple and efficient method for production of magnetic composites by decorating CoFe{sub 2}O{sub 4} with polydopamine (PDA) through oxidative polymerization of dopamine was conducted. Further, magnetic alginate beads with porous structure containing well-dispersed CoFe{sub 2}O{sub 4}-PDA were fabricated by ionic crosslinking technology. The resulting SA@CoFe{sub 2}O{sub 4}-PDA beads were characterized using scanning electron microscopy, Fourier transform infrared spectrometry, X-ray diffractometer, vibrating sample magnetometer and X-ray photoelectron spectroscopy. Adsorption potential of SA@CoFe{sub 2}O{sub 4}-PDA beads for organic dyes including Methylene Blue (MB), Crystal Violet (CV) and Malachite Green (MG) was evaluated. SA@CoFe{sub 2}O{sub 4}-PDA beads exhibited excellent adsorption performances due to the composite effect, large surface area and porous structure. Organic dyes could be removed from water solution with high efficiency in a wide pH range of 4.0–9.0. Moreover, it exhibited much higher adsorptivity towards MB and CV with the maximum adsorption capacities of 466.60 and 456.52 mg/g, respectively, which were much higher than that of MG (248.78 mg/g). Ca-electrolyte had obvious adverse effects on MB and CV adsorption than MG. FTIR and XPS demonstrated that carboxylate, catechol, hydroxyl and amine groups might be involved in adsorption of organic dyes. The characteristics of wide pH range, high adsorption capacity and convenient magnetic separation would make SA@CoFe{sub 2}O{sub 4}-PDA beads as effective adsorbent for removal of organic dyes from wastewater.

  1. Case law

    International Nuclear Information System (INIS)

    2016-01-01

    This section treats of the following case laws: 1 - Case Law France: Conseil d'etat decision, 22 February 2016, EDF v. Republic and Canton of Geneva relative to the Bugey nuclear power plant (No. 373516); United States: Brodsky v. US Nuclear Regulatory Commission, 650 Fed. Appx. 804 (2. Cir. 2016)

  2. Law 302.

    Science.gov (United States)

    Manitoba Dept. of Education, Winnipeg.

    This publication outlines a law course intended as part of a business education program in the secondary schools of Manitoba, Canada. The one credit course of study should be taught over a period of 110-120 hours of instruction. It provides students with an introduction to the principles, practices, and consequences of law with regard to torts,…

  3. A rapid, fully non-contact, hybrid system for generating Lamb wave dispersion curves.

    Science.gov (United States)

    Harb, M S; Yuan, F G

    2015-08-01

    A rapid, fully non-contact, hybrid system which encompasses an air-coupled transducer (ACT) and a laser Doppler vibrometer (LDV) is presented for profiling A0 Lamb wave dispersion of an isotropic aluminum plate. The ACT generates ultrasonic pressure incident upon the surface of the plate. The pressure waves are partially refracted into the plate. The LDV is employed to measure the out-of-plane velocity of the excited Lamb wave mode at some distances where the Lamb waves are formed in the plate. The influence of the ACT angle of incidence on Lamb wave excitation is investigated and Snell's law is used to directly compute Lamb wave dispersion curves including phase and group velocity dispersion curves in aluminum plates from incident angles found to generate optimal A0 Lamb wave mode. The measured curves are compared to results obtained from a two-dimensional (2-D) Fast Fourier transform (FFT), Morlet wavelet transform (MWT) and theoretical predictions. It was concluded that the experimental results obtained using Snell's law concept are well in accordance with the theoretical solutions. The high degree of accuracy in the measured data with the theoretical results proved a high sensitivity of the air-coupled and laser ultrasound in characterizing Lamb wave dispersion in plate-like structures. The proposed non-contact hybrid system can effectively characterize the dispersive relation without knowledge of neither the materials characteristics nor the mathematical model. Copyright © 2015 Elsevier B.V. All rights reserved.

  4. Case - Case-Law - Law

    DEFF Research Database (Denmark)

    Sadl, Urska

    2013-01-01

    Reasoning of the Court of Justice of the European Union – Constr uction of arguments in the case-law of the Court – Citation technique – The use of formulas to transform case-law into ‘law’ – ‘Formulaic style’ – European citizenship as a fundamental status – Ruiz Zambrano – Reasoning from...

  5. Modeling electrical dispersion phenomena in Earth materials

    Directory of Open Access Journals (Sweden)

    D. Patella

    2008-06-01

    Full Text Available It is illustrated that IP phenomena in rocks can be described using conductivity dispersion models deduced as solutions to a 2nd-order linear differential equation describing the motion of a charged particle immersed in an external electrical field. Five dispersion laws are discussed, namely: the non-resonant positive IP model, which leads to the classical Debye-type dispersion law and by extension to the Cole-Cole model, largely used in current practice; the non-resonant negative IP model, which allows negative chargeability values, known in metals at high frequencies, to be explained as an intrinsic physical property of earth materials in specific field cases; the resonant flat, positive or negative IP models, which can explain the presence of peak effects at specific frequencies superimposed on flat, positive or negative dispersion spectra.

  6. Dispersion free control of hydroelastic waves down to sub-wavelength scale

    Science.gov (United States)

    Domino, Lucie; Fermigier, Marc; Fort, Emmanuel; Eddi, Antonin

    2017-11-01

    Hydroelastic surface waves propagate at the surface of water covered by a thin elastic sheet and can be directly measured with accurate space and time resolution. We present an experimental approach using hydroelastic waves that allows us to control waves down to the sub-wavelength scale. We tune the wave dispersion relation by varying locally the properties of the elastic cover and we introduce a local index contrast. This index contrast is independent of the frequency leading to a dispersion-free Snell-Descartes law for hydroelastic waves. We then show experimental evidence of broadband focusing, reflection and refraction of the waves. We also investigate the limits of diffraction through the example of a macroscopic analog to optical nanojets, revealing that any sub-wavelength configuration gives access to new features for surface waves.

  7. Dispersion-free control of hydroelastic waves down to sub-wavelength scale

    Science.gov (United States)

    Domino, L.; Fermigier, M.; Fort, E.; Eddi, A.

    2018-01-01

    Hydroelastic surface waves propagate at the surface of water covered by a thin elastic sheet and can be directly measured with accurate space and time resolution. We present an experimental approach using hydroelastic waves that allows us to control waves down to the sub-wavelength scale. We tune the wave dispersion relation by varying locally the properties of the elastic cover and we introduce a local index contrast. This index contrast is independent of the frequency leading to a dispersion-free Snell-Descartes law for hydroelastic waves. We then show experimental evidence of broadband focusing, reflection and refraction of the waves. We also investigate the limits of diffraction through the example of a macroscopic analog to optical nanojets, revealing that any sub-wavelength configuration gives access to new features for surface waves.

  8. Private law

    DEFF Research Database (Denmark)

    working and researching in the key areas of law, security and privacy in IT, international trade and private law. Now, in 2010 and some seven conferences later, the event moves to Barcelona and embraces for the first time the three conference tracks just described. The papers in this work have all been...... and continue to offer an informed and relevant contribution to the policy making agenda. As Chair of the Conference Committee, I am once more very proud to endorse this work "Private Law: Rights, Duties & Conflicts" to all those seeking an up to date and informed evaluation of the leading issues. This work...

  9. Nuclear law

    International Nuclear Information System (INIS)

    Zwam, H.J. van

    1985-01-01

    A description is given of international and Dutch-national atomic energy law. Attention is paid to regulations relevant to industry, as well as to relationships between national and international regulations. First, international law is considered, namely the Euratom Treaty, Euratom institutes and tasks of Euratom. Next, the Dutch-national legislation is discussed with respect to nuclear fuels, ores and security of State (Defence interests). Regulations concerning radioactive materials in working rooms and instruments, personnel dosimetry and safety measures are discussed. Finally, authority control on rule observance and penal uphold of nuclear law is considered. (G.J.P.)

  10. Boundary layer heights and surface fluxes of momentum and heat derived from ECMWF data for use in pollutant dispersion models - problems with data accuracy

    Energy Technology Data Exchange (ETDEWEB)

    Wotawa, G. [Univ. of Agricultural Sciences, Inst. of Meteorology and Physics, Vienna (Austria); Stohl, A. [Ludwig-Maximilians-Univ. Muenchen, Munich (Germany)

    1997-10-01

    Certain boundary layer parameters, especially boundary layer heights, are very important for pollutant dispersion modelling. On the regional scale (>- 100 km), data of the numerical weather prediction model of the European Centre for Medium-Range Weather Forecasts are often used for that purpose. Based on ECMWF data, the meteorological preprocessor FLEXTRA for Lagrangian air quality simulation models and the Lagrangian particle diffusion model FLEXPART have been developed. Using analyses and short term forecasts, a temporal resolution of three hours can be achieved. Some alternative methods to obtain boundary layer parameters can be applied, producing different results which affect all subsequent calculations, for instance the calculation of boundary layer trajectories and the dispersion of air pollutants. (au)

  11. Influence of Selected Alkoxysilanes on Dispersive Properties and Surface Chemistry of Titanium Dioxide and TiO2–SiO2 Composite Material

    Directory of Open Access Journals (Sweden)

    Katarzyna Siwińska-Stefańska

    2012-01-01

    Full Text Available The paper reports on characterisation of titanium dioxide and coprecipitated TiO2–SiO2 composite material functionalised with selected alkoxysilanes. Synthetic composite material was obtained by an emulsion method with cyclohexane as the organic phase, titanium sulfate as titanium precursor, and sodium silicate solution as precipitating agent were applied. Structures of titania and composite material samples were studied by the wide angle X-ray scattering method. The chemical composition of TiO2–SiO2 composite material precipitated was evaluated based on the energy dispersive X-ray spectroscopy technique. The functionalised TiO2 and TiO2–SiO2 composite material were thoroughly characterised to determine the yield of functionalisation with silanes. The characterisation included determination of dispersion and morphology of the systems (particle size distribution, scanning electron microscope images, adsorption properties (nitrogen adsorption isotherms, and electrokinetic properties (zeta potential.

  12. Dispersion effect and auto-reconditioning performance of nanometer ...

    Indian Academy of Sciences (India)

    Administrator

    ash were used in this work. 2.2 Dispersion experiment. A combinative method of ultrasonic dispersion, mechani- cal agitation and surface modification was adopted to disperse nanometer WS2 particles in green lubricant in this study. And to realize this method, we designed a dispersing equipment and figure 2 gives the ...

  13. Wave-equation dispersion inversion

    KAUST Repository

    Li, Jing

    2016-12-08

    We present the theory for wave-equation inversion of dispersion curves, where the misfit function is the sum of the squared differences between the wavenumbers along the predicted and observed dispersion curves. The dispersion curves are obtained from Rayleigh waves recorded by vertical-component geophones. Similar to wave-equation traveltime tomography, the complicated surface wave arrivals in traces are skeletonized as simpler data, namely the picked dispersion curves in the phase-velocity and frequency domains. Solutions to the elastic wave equation and an iterative optimization method are then used to invert these curves for 2-D or 3-D S-wave velocity models. This procedure, denoted as wave-equation dispersion inversion (WD), does not require the assumption of a layered model and is significantly less prone to the cycle-skipping problems of full waveform inversion. The synthetic and field data examples demonstrate that WD can approximately reconstruct the S-wave velocity distributions in laterally heterogeneous media if the dispersion curves can be identified and picked. The WD method is easily extended to anisotropic data and the inversion of dispersion curves associated with Love waves.

  14. Taylor dispersion of nanoparticles

    Science.gov (United States)

    Balog, Sandor; Urban, Dominic A.; Milosevic, Ana M.; Crippa, Federica; Rothen-Rutishauser, Barbara; Petri-Fink, Alke

    2017-08-01

    The ability to detect and accurately characterize particles is required by many fields of nanotechnology, including materials science, nanotoxicology, and nanomedicine. Among the most relevant physicochemical properties of nanoparticles, size and the related surface-to-volume ratio are fundamental ones. Taylor dispersion combines three independent phenomena to determine particle size: optical extinction, translational diffusion, and sheer-enhanced dispersion of nanoparticles subjected to a steady laminar flow. The interplay of these defines the apparent size. Considering that particles in fact are never truly uniform nor monodisperse, we rigorously address particle polydispersity and calculate the apparent particle size measured by Taylor dispersion analysis. We conducted case studies addressing aqueous suspensions of model particles and large-scale-produced "industrial" particles of both academic and commercial interest of various core materials and sizes, ranging from 15 to 100 nm. A comparison with particle sizes determined by transmission electron microscopy confirms that our approach is model-independent, non-parametric, and of general validity that provides an accurate account of size polydispersity—independently on the shape of the size distribution and without any assumption required a priori.

  15. Private law

    DEFF Research Database (Denmark)

    working and researching in the key areas of law, security and privacy in IT, international trade and private law. Now, in 2010 and some seven conferences later, the event moves to Barcelona and embraces for the first time the three conference tracks just described. The papers in this work have all been...... and continue to offer an informed and relevant contribution to the policy making agenda. As Chair of the Conference Committee, I am once more very proud to endorse this work "Private Law: Rights, Duties & Conflicts" to all those seeking an up to date and informed evaluation of the leading issues. This work......When the International Association of IT Lawyers (IAITL) held its first international conference in 2006 in Hamburg, it could never have been envisaged just how successful the programme would become as a firm 'not to be missed' date of the calendar of increasing numbers of academics and others...

  16. Statistical effects related to low numbers of reacting molecules analyzed for a reversible association reaction A + B = C in ideally dispersed systems: An apparent violation of the law of mass action.

    Science.gov (United States)

    Szymanski, R; Sosnowski, S; Maślanka, Ł

    2016-03-28

    Theoretical analysis and computer simulations (Monte Carlo and numerical integration of differential equations) show that the statistical effect of a small number of reacting molecules depends on a way the molecules are distributed among the small volume nano-reactors (droplets in this study). A simple reversible association A + B = C was chosen as a model reaction, enabling to observe both thermodynamic (apparent equilibrium constant) and kinetic effects of a small number of reactant molecules. When substrates are distributed uniformly among droplets, all containing the same equal number of substrate molecules, the apparent equilibrium constant of the association is higher than the chemical one (observed in a macroscopic-large volume system). The average rate of the association, being initially independent of the numbers of molecules, becomes (at higher conversions) higher than that in a macroscopic system: the lower the number of substrate molecules in a droplet, the higher is the rate. This results in the correspondingly higher apparent equilibrium constant. A quite opposite behavior is observed when reactant molecules are distributed randomly among droplets: the apparent association rate and equilibrium constants are lower than those observed in large volume systems, being the lower, the lower is the average number of reacting molecules in a droplet. The random distribution of reactant molecules corresponds to ideal (equal sizes of droplets) dispersing of a reaction mixture. Our simulations have shown that when the equilibrated large volume system is dispersed, the resulting droplet system is already at equilibrium and no changes of proportions of droplets differing in reactant compositions can be observed upon prolongation of the reaction time.

  17. Key factors for UV curable pigment dispersions

    International Nuclear Information System (INIS)

    Magny, B.; Pezron, E.; Ciceron, P.H.; Askienazy, A.

    1999-01-01

    UV oligomers with good pigment dispersion are needed to allow good formulation flexibility and possibility to apply thinner films. Pigment dispersion mainly depends on three phenomena: the wetting of agglomerates, the breakage of agglomerates by mechanical stress and the stabilization of smaller agglomerates and primary particles against flocculation. It has been shown that oligomers with low viscosity and low surface tension induce a good pigment wetting. Examples of monomers and oligomers for good pigment dispersion are given

  18. Case law

    International Nuclear Information System (INIS)

    Anon.

    1999-01-01

    This paper gives and analyses three examples of case law: decision rejecting application to close down Tomari nuclear power plant (Japan); judgement by the Supreme Administrative Court on the closing of Barsebaeck (Sweden); litigation relating to the Department of Energy's obligations under the Nuclear Waste Policy Act to accept spent nuclear fuel and high-level radioactive waste (United States). (A.L.B.)

  19. Case law

    International Nuclear Information System (INIS)

    2015-01-01

    This section treats of the two following case laws: Slovak Republic: Further developments in cases related to the challenge by Greenpeace Slovakia to the Mochovce nuclear power plant; United States: Judgment of the Nuclear Regulatory Commission denying requests from petitioners to suspend final reactor licensing decisions pending the issuance of a final determination of reasonable assurance of permanent disposal of spent fuel

  20. Business Law

    OpenAIRE

    Marson, James; Ferris, Katy

    2016-01-01

    Marson & Ferris provide a thorough account of the subject for students. Essential topics are introduced by exploring current and pertinent examples and the relevance of the law in a business environment is considered throughout. This pack includes a supplement which considers the effects of the Consumer Rights Act 2015.

  1. Comparative Study of Catalytic Oxidation of Ethanol to Acetaldehyde Using Fe(III Dispersed on Sb2O5 Grafted on SiO2 and on Untreated SiO2 Surfaces

    Directory of Open Access Journals (Sweden)

    Benvenutti Edilson V.

    1998-01-01

    Full Text Available Fe(III was supported on Sb(V oxide grafted on the silica gel surface and directly on the silica gel surface using ion-exchange and impregnation processes producing Fe/Sb/SiO2 and Fe/SiO2, respectively. The catalytic conversion of ethanol to acetaldehyde was much more efficient using Fe/Sb/SiO2 than Fe/SiO2 as catalyst. This higher efficiency of the former catalyst takes into account two aspects: a the new phase FeSbO4 formed when Fe/Sb/SiO2 is heat treated and, b it is higher dispersion on the matrix.

  2. Nuclear Energy Law and Arbo Law/Safety Law

    International Nuclear Information System (INIS)

    Eijnde, J.G. van den

    1986-01-01

    The legal aspects of radiation protection in the Netherlands are described. Radiation protection is regulated mainly in the Nuclear Energy Law. The Arbo Law also has some sections about radiation protection. The interaction between both laws is discussed. (Auth.)

  3. Effect of ultrasound treatment on steady and dynamic shear properties of glucomannan based salep dispersions: optimization of amplitude level, sonication time and temperature using response surface methodology.

    Science.gov (United States)

    Karaman, Safa; Yilmaz, Mustafa Tahsin; Ertugay, Mustafa Fatih; Baslar, Mehmet; Kayacier, Ahmed

    2012-07-01

    The present study investigated effect of different amplitude levels (40, 70 and 100%), sonication temperatures (40, 50 and 60°C) and exposure times (3, 7 and 11 min) on steady shear properties; apparent viscosity (η), shear stress (σ), consistency coefficient (K), flow behavior index (n) and dynamic shear properties; storage modulus (G'), loss modulus (G″), complex viscosity (η(∗)), complex modulus (G(∗)) and loss tangent (tan δ) values of glucomannan based salep solution (SS) and salep drink (SD) samples. In addition, the steady and dynamic shear properties were optimized using ridge analysis in terms of amplitude level, sonication temperature and exposure times levels. Increasing amplitude level and sonication time decreased considerably the η, σ, K, G', G″ and η* values of salep dispersions (SS and SD samples). However, sonication temperature did not have a remarkable effect on these properties. Copyright © 2011 Elsevier B.V. All rights reserved.

  4. Simulating Regolith Excavation, Entrainment, Dispersal and Visibility Impairment due to Rocket Plume-Surface Interaction via a Hybrid Continuum-Rarefied Flow Solver

    Data.gov (United States)

    National Aeronautics and Space Administration — With NASA planning to redirect an asteroid and possible future missions to the Moon or Martian satellites, the effects of thruster plume impingement on the surfaces...

  5. Islamic Law

    Directory of Open Access Journals (Sweden)

    Doranda Maracineanu

    2009-06-01

    Full Text Available The law system of a State represents the body of rules passed or recognized by that State inorder to regulate the social relationships, rules that must be freely obeyed by their recipients, otherwisethe State intervening with its coercive power. Throughout the development of the society, pedants havebeen particularly interested in the issue of law systems, each supporting various classifications; theclassification that has remained is the one distinguishing between the Anglo-Saxon, the Roman-German,the religious and respectively the communist law systems. The third main international law system is theMuslim one, founded on the Muslim religion – the Islam. The Islam promotes the idea that Allah createdthe law and therefore it must be preserved and observed as such. Etymologically, the Arabian word“Islam” means “to be wanted, to obey” implying the fact that this law system promotes total andunconditioned submission to Allah. The Islamic law is not built on somebody of laws or leading cases,but has as source. The Islam is meant as a universal religion, the Koran promoting the idea of the unityof mankind; thus, one of the precepts in the Koran asserts that “all men are equal (…, there is nodifference between a white man and a black man, between one who is Arabian and one who is not,except for the measure in which they fear God.” The Koran is founded mainly on the Talmud, Hebrewsource of inspiration, and only on very few Christian sources. The Islam does not forward ideas whichcannot be materialized; on the contrary its ideas are purely practical, easy to be observed by the commonman, ideas subordinated to the principle of monotheism. The uncertainties and gaps of the Koran, whichhave been felt along the years, imposed the need for another set of rules, meant to supplement it – that isSunna. Sunna represents a body of laws and, consequently, the second source of the Koran. Sunnanarrates the life of the prophet Mohamed, the model to

  6. Criminal law

    International Nuclear Information System (INIS)

    Silva, J.M. da.

    1979-01-01

    Facts concerning the application of atomic energy are presented and those aspects which should be under tutelage, the nature and guilt of the nuclear offenses and the agent's peril are presented. The need of a specific chapter in criminal law with adequate legislation concerning the principles of atomic energy is inferred. The basis for the future elaboration this legislation are fixed. (A.L.S.L.) [pt

  7. Influence of the nature of surface-active substances on rheology of high-filled pastelike compositions on a base on liquid diene rubber and disperse filler

    Directory of Open Access Journals (Sweden)

    Alexander B. Surovtcev

    2014-12-01

    Full Text Available Results of researches on reception of pastelike high-filled compositions and estimation of their rheological properties with use cone – plate rheometer are presented. Liquid diene rubber with end hydroxyl groups (as binding, surfaceactive substance (PEAHENS and disperse filler are entered into structure of compositions. The estimation of sedimentation firmness of compositions and their fluidity in the range of pressure of shift 1 – 30 кPа and temperatures from 30 to 50°С is executed. By results of an estimation of influence of concentration dependence of PEAHENS on a viscosity indicator it is shown that its introduction in a pastelike composition at level 0.5 mas. % is expedient. For considered in work low polar liquid diene rubber more effective decrease in viscosity of a pastelike composition provide polyoxypropylene, especially on the average an interval of pressure of shift which basically can be used in practice. Slightly concede them titanorganic derivatives of oligomer polyoxypropylene. The greatest effect of decrease in viscosity for compositions will reach at use oligomer polyoxypropylene with molecular weight 480, in this case viscosity of a composition is at level of 10 Pa ⋅ s for rather wide interval of pressure of shift.

  8. Detection of anomalous features in an earthen dam using inversion of P-wave first-arrival times and surface-wave dispersion curves

    Science.gov (United States)

    Kim, K. Y.; Jeon, K. M.; Hong, M. H.; Park, Young-gyu

    2011-02-01

    To locate anomalous features including seepage pathways through the Daeryong earth-fill dam, P and Rayleigh waves were recorded along a 250-m profile on the crest of the dam. Seismic energy was generated using a 5-kg sledgehammer and detected by 24 4.5-Hz vertical-axis geophones installed at 3-m intervals. P-wave and apparent S-wave velocities of the reservoir dam and underlying bedrock were then inverted from first-arrival traveltimes and dispersion curves of Rayleigh waves, respectively. Apparent dynamic Poisson's ratios as high as 0.46 were obtained at the base of the dam near its north-east end, where an outlet conduit occurs, and in the clay core body near the south-west end of the profile where the dam was repeatedly grouted to abate seepage before our survey. These anomalies of higher Poisson's ratios in the upper part of clay core were also associated with effusion of grout on the downstream slope of the dam during post-survey grouting to abate leakage. Combining P-wave traveltime tomography and inversion of Rayleigh wave velocities was very effective in detecting potential pathways for seepage and previous grouted zones in this earthen dam.

  9. Study of dispersion of mass distribution of ultra-high energy cosmic rays using a surface array of muon and electromagnetic detectors

    Czech Academy of Sciences Publication Activity Database

    Vícha, Jakub; Trávníček, Petr; Nosek, D.; Ebr, Jan

    2015-01-01

    Roč. 67, Sep (2015), 11-17 ISSN 0927-6505 R&D Projects: GA ČR(CZ) GA14-17501S Institutional support: RVO:68378271 Keywords : ultra-high energy cosmic rays * extensive air showers * surface detectors * CIC method * mass composition Subject RIV: BF - Elementary Particles and High Energy Physics Impact factor: 3.425, year: 2015

  10. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    resources/resources-by-sector-and-topic/tourism- services (accessed 27 March 2017). LAW. OCRACY. ELOPMENT. LAW. DEMOCRACY. & DEVELOPMENT ... LAW, DEMOCRACY & DEVELOPMENT/ VOL 21 (2017) .... 29 Morupisi P & Mokgalo L “Domestic tourism challenges in Botswana: a stakeholders' perspective”.

  11. Operational Law Handbook,2007

    National Research Council Canada - National Science Library

    2007-01-01

    ...), human rights, rules of engagement, emergency essential civilians supporting military operations, contingency contractor personnel, foreign and deployment, criminal law, environmental law, fiscal law...

  12. Genetics of dispersal

    Science.gov (United States)

    Bocedi, Greta; Cote, Julien; Legrand, Delphine; Guillaume, Frédéric; Wheat, Christopher W.; Fronhofer, Emanuel A.; Garcia, Cristina; Henry, Roslyn; Husby, Arild; Baguette, Michel; Bonte, Dries; Coulon, Aurélie; Kokko, Hanna; Matthysen, Erik; Niitepõld, Kristjan; Nonaka, Etsuko; Stevens, Virginie M.; Travis, Justin M. J.; Donohue, Kathleen; Bullock, James M.; del Mar Delgado, Maria

    2017-01-01

    ABSTRACT Dispersal is a process of central importance for the ecological and evolutionary dynamics of populations and communities, because of its diverse consequences for gene flow and demography. It is subject to evolutionary change, which begs the question, what is the genetic basis of this potentially complex trait? To address this question, we (i) review the empirical literature on the genetic basis of dispersal, (ii) explore how theoretical investigations of the evolution of dispersal have represented the genetics of dispersal, and (iii) discuss how the genetic basis of dispersal influences theoretical predictions of the evolution of dispersal and potential consequences. Dispersal has a detectable genetic basis in many organisms, from bacteria to plants and animals. Generally, there is evidence for significant genetic variation for dispersal or dispersal‐related phenotypes or evidence for the micro‐evolution of dispersal in natural populations. Dispersal is typically the outcome of several interacting traits, and this complexity is reflected in its genetic architecture: while some genes of moderate to large effect can influence certain aspects of dispersal, dispersal traits are typically polygenic. Correlations among dispersal traits as well as between dispersal traits and other traits under selection are common, and the genetic basis of dispersal can be highly environment‐dependent. By contrast, models have historically considered a highly simplified genetic architecture of dispersal. It is only recently that models have started to consider multiple loci influencing dispersal, as well as non‐additive effects such as dominance and epistasis, showing that the genetic basis of dispersal can influence evolutionary rates and outcomes, especially under non‐equilibrium conditions. For example, the number of loci controlling dispersal can influence projected rates of dispersal evolution during range shifts and corresponding demographic impacts

  13. Case law

    International Nuclear Information System (INIS)

    2012-01-01

    This section gathers the following case laws: 1 - Canada: Judicial review of Darlington new nuclear power plant project; Appeal decision upholding criminal convictions related to attempt to export nuclear-related dual-use items to Iran: Her Majesty the Queen V. Yadegari; 2 - European Commission: Greenland cases; 3 - France: Chernobyl accident - decision of dismissal of the Court of Appeal of Paris; 4 - Slovak Republic: Aarhus Convention compliance update; 5 - United States: Judgement of a US court of appeals upholding the NRC's dismissal of challenges to the renewal of the operating licence for Oyster Creek Nuclear Generating Station; reexamination of the project of high-level waste disposal site at Yucca Mountain

  14. Case law

    International Nuclear Information System (INIS)

    2016-01-01

    This section treats of the following case laws: 1 - Canada: Decision of the Canadian Federal Court of Appeal dismissing an appeal related to an environmental assessment of a project to refurbish and extend the life of an Ontario nuclear power plant; 2 - Poland: Decision of the Masovian Voivod of 28 December 2015 concerning the legality of the resolution on holding a local referendum in the Commune of Rozan regarding a new radioactive waste repository (2015); 3 - United States: Commission authorises issuance of construction permit for the Shine Medical Isotope Facility in Janesville, Wisconsin; 4 - United States: Commission authorises issuance of combined licences for the South Texas Project site in Matagorda County, Texas

  15. Nuclear magnetic relaxation dispersion and 31P-NMR studies of the effect of covalent modification of membrane surfaces with poly(ethylene glycol).

    Science.gov (United States)

    Tilcock, C; Ahkong, Q F; Koenig, S H; Brown, R D; Kabalka, G; Fisher, D

    1992-10-05

    Covalent attachment of methoxypoly(ethylene glycol) (MPEG) 5000 to the surface of unilamellar liposomes composed of egg phosphatidylcholine and dioleoylphosphatidylethanolamine (DOPE) (8:2) containing paramagnetic chelates, either entrapped within the interior volume of the liposomes, or associated with the membrane surface, had no effect upon the measured spin-lattice relaxation rates (1/T1) for water in these systems. 31P-NMR studies indicate no destabilization of dioleoylphosphatidylcholine (DOPC)/(DOPE) (1:1) vesicles following attachment of MPEG. However, in DOPC/DOPE (1:3) mixtures, covalent modification with MPEG results in a destabilization of multilamellar vesicles into smaller vesicular structures. These results indicate that covalent attachment of poly(ethylene glycol) to liposomal magnetic resonance agents may prove a useful method for increasing their utility as vascular MR agents by extending their lifetime in the circulation, without decreasing the relaxivity of paramagnetic species associated with the liposome, but that the presence of PEG covalently attached to the membrane surface may modify the polymorphic phase behavior of the lipid system to which it is covalently linked.

  16. Scanning Electron Microscopy Coupled with Energy Dispersive Spectrometric Analysis Reveals for the First Time Weddellite and Sylvite Crystals on the Surface of Involucral Bracts and Petals of two Xeranthemum L. (Compositae) Species.

    Science.gov (United States)

    Gavrilović, Milan; Erić, Suzana; Marin, Petar D; Garcia-Jacas, Núria; Susanna, Alfonso; Janaćković, Pedja

    2017-06-01

    In this work, weddellite and sylvite crystals are identified for the first time on the involucral bracts and petals of Xeranthemum annuum and Xeranthemum cylindraceum using scanning electron microscopy coupled with energy dispersive spectrometric (SEM-EDS) analysis. Well-developed crystals of weddellite (CaC2O4·2H2O) occur in the form of a tetragonal bipyramid (hhl), rarely in combination of a bipyramid and tetragonal prism (h00). Indumentum of involucral bracts of X. cylindraceum consists of nonglandular and glandular trichomes. Sylvite (KCl) crystals are observed only on the petal surface of X. cylindraceum. The crystals of sylvite occur in the form of perfect cubes (hexahedrons), but some crystals are deformed, i.e., partially elongated. Taxonomic significance of investigated microcharacters as well as the use of SEM-EDS analysis in taxonomic studies of plants are discussed.

  17. Lectures on Dispersion Theory

    Science.gov (United States)

    Salam, A.

    1956-04-01

    Lectures with mathematical analysis are given on Dispersion Theory and Causality and Dispersion Relations for Pion-nucleon Scattering. The appendix includes the S-matrix in terms of Heisenberg Operators. (F. S.)

  18. Ga[OSi(O(t)Bu)3]3·THF, a thermolytic molecular precursor for high surface area gallium-containing silica materials of controlled dispersion and stoichiometry.

    Science.gov (United States)

    Dombrowski, James P; Johnson, Gregory R; Bell, Alexis T; Tilley, T Don

    2016-07-05

    The molecular precursor tris[(tri-tert-butoxy)siloxy]gallium, as the tetrahydrofuran adduct Ga[OSi(O(t)Bu)3]3·THF (), was synthesized via the salt metathesis reaction of gallium trichloride with NaOSi(O(t)Bu)3. This complex serves as a model for isolated gallium in a silica framework. Complex decomposes thermally in hydrocarbon solvent, eliminating isobutylene, water, and tert-butanol to generate high surface area gallium-containing silica at low temperatures. When thermal decomposition was performed in the presence of P-123 Pluronic as a templating agent the generated material displayed uniform vermicular pores. Textural mesoporosity was evident in untemplated material. Co-thermolysis of with HOSi(O(t)Bu)3 in the presence of P-123 Pluronic led to materials with Ga : Si ratios ranging from 1 : 3 to 1 : 50, denoted UCB1-GaSi3, UCB1-GaSi10, UCB1-GaSi20 and UCB1-GaSi50. After calcination at 500 °C these materials exhibited decreasing surface areas and broadening pore distributions with increasing silicon content, indicating a loss of template effects. The position and dispersion of the gallium in UCB1-GaSi materials was investigated using (71)Ga MAS-NMR, powder XRD, and STEM/EDS elemental mapping. The results indicate a high degree of gallium dispersion in all samples, with gallium oxide clusters or oligomers present at higher gallium content.

  19. Case law

    International Nuclear Information System (INIS)

    Anon.

    2002-01-01

    Several judgements are carried: Supreme Administrative Court Judgement rejecting an application to prevent construction of a new nuclear power plant (Finland); judgement of the Council of State specifying the law applicable to storage facilities for depleted uranium (France); Supreme Court Decision overturning for foreign spent fuel (Russian federation); Court of Appeal Judgement on government decision to allow the start up of a MOX fuel plant ( United Kingdom); judgement on lawfulness of authorizations granted by the Environment Agency: Marchiori v. the Environment Agency; (U.K.); Kennedy v. Southern California Edison Co. (U.S.A); Judgement concerning Ireland ' s application to prevent operation of BNFL ' s MOX facility at Sellafield: Ireland v. United Kingdom; At the European Court of Human Rights Balmer-Schafroth and others have complained v. Switzerland. Parliamentary decision rescinding the shutdown date for Barseback - 2 (Sweden); Decision of the International trade Commission regarding imposition of countervailing and anti-dumping duties on imports of low enriched uranium from the European Union, Yucca Mountain site recommendation (USA). (N.C.)

  20. Dispersing powders in liquids

    CERN Document Server

    Nelson, RD

    1988-01-01

    This book provides powder technologists with laboratory procedures for selecting dispersing agents and preparing stable dispersions that can then be used in particle size characterization instruments. Its broader goal is to introduce industrial chemists and engineers to the phenomena, terminology, physical principles, and chemical considerations involved in preparing and handling dispersions on a commercial scale. The book introduces novices to: - industrial problems due to improper degree of dispersion; - the nomenclature used in describing particles; - the basic physica

  1. Visualization of Kepler's Laws of Planetary Motion

    Science.gov (United States)

    Lu, Meishu; Su, Jun; Wang, Weiguo; Lu, Jianlong

    2017-01-01

    For this article, we use a 3D printer to print a surface similar to universal gravitation for demonstrating and investigating Kepler's laws of planetary motion describing the motion of a small ball on the surface. This novel experimental method allows Kepler's laws of planetary motion to be visualized and will contribute to improving the…

  2. Case law

    International Nuclear Information System (INIS)

    2014-01-01

    This section of the Bulletin brings together the texts of the following case laws: Canada: - Judgment of the Federal Court of Canada sending back to a joint review panel for reconsideration the environmental assessment of a proposed new nuclear power plant in Ontario. France : - Conseil d'etat, 24 March 2014 (Request No. 358882); - Conseil d'etat, 24 March 2014 (Request No. 362001). Slovak Republic: - Further developments in cases related to the challenge by Greenpeace Slovakia to the Mochovce nuclear power plant; - Developments in relation to the disclosure of information concerning the Mochovce nuclear power plant. United States: - Initial Decision of the Atomic Safety and Licensing Board Ruling in Favour of Nuclear Innovation North America, LLC (NINA) Regarding Foreign Ownership, Control or Domination

  3. Case law

    International Nuclear Information System (INIS)

    2017-01-01

    This section treats of the following case laws (United States): 1 - Virginia Uranium, Inc. v. Warren, 848 F.3d 590 (4. Cir. 2017): In the United States District Court for the Western District of Virginia, the plaintiffs, a collection of uranium mining companies and owners of land containing uranium deposits, challenged a Commonwealth of Virginia moratorium on conventional uranium mining. The plaintiffs alleged that the state moratorium was preempted by federal law under the Supremacy Clause of the US Constitution.; 2 - United States v. Energy Solutions, Inc.; Rockwell Holdco, Inc.; Andrews County; Holdings, Inc.; and Waste Control Specialists, LLC. (D. Del. June 21, 2017): In 2016, the United States, acting through the US Department of Justice, commenced an action in United States District Court in Delaware seeking to enjoin the acquisition of Waste Control Specialists, LLC (WCS) and its parent company by Energy Solutions, Inc., and its parent. WCS and Energy Solutions are competitors in the market for the disposal of low-level radioactive waste (LLRW) produced by commercial generators of such material. The United States alleged that the proposed acquisition was unlawful. 3 - Cooper v. Tokyo Electric Power Company, No. 15-56426 (9. Cir. 2017): The plaintiffs are US Navy service members who were deployed off the Japanese coast as part of the US effort to provide earthquake relief after the 9.0 earthquake and tsunami that struck Japan on 11 March 2011. Plaintiffs sued alleging 'that TEPCO was negligent in operating the Fukushima Daiichi Nuclear Power Plant and in reporting the extent of the radiation leak

  4. The influence of the surface parameter changes onto the phonon states in ultrathin crystalline films

    Science.gov (United States)

    Šetrajčić, Jovan P.; Ilić, Dušan I.; Jaćimovski, Stevo K.

    2018-04-01

    In this paper, we have analytically investigated how the changes in boundary surface parameters influence the phonon dispersion law in ultrathin films of the simple cubic crystalline structure. Spectra of possible phonon states are analyzed using the method of two-time dependent Green's functions and for the diverse combination of boundary surface parameters, this problem was presented numerically and graphically. It turns out that for certain values and combinations of parameters, displacement of dispersion branches outside of bulk zone occurs, leading to the creation of localized phonon states. This fact is of great importance for the heat removal, electrical conductivity and superconducting properties of ultrathin films.

  5. Dummy-surface molecularly imprinted polymers as a sorbent of micro-solid-phase extraction combined with dispersive liquid-liquid microextraction for determination of five 2-phenylpropionic acid NSAIDs in aquatic environmental samples.

    Science.gov (United States)

    Guo, Ping; Yuan, Xucan; Zhang, Jingjing; Wang, Binjie; Sun, Xiaoyang; Chen, Xiaohui; Zhao, Longshan

    2018-01-01

    A highly binding dummy template surface of molecularly imprinted polymers (MWNTs-MIPs) was synthesized on multi-walled carbon nanotubes surface using 2-phenylpropionic acid as dummy template, 4-vinylpyridine as the functional monomer, ethylene glycol dimethacrylate as the cross-linker, and DMF as porogen by precipitation polymerization method. MIPs were characterized by FT-IR spectroscopy, scanning electron microscope, thermo-gravimetric analysis, and nitrogen adsorption-desorption experiment. Adsorption and selectivity experiments of MIPs and non-imprinted polymers (NIPs) verified that the MIPs had a good selectivity and adsorption properties for five 2-phenylpropionic acid nonsteroidal anti-inflammatory drugs (NSAIDs). Imprinted polymer was used as a sorbent material for μSPE in current work and μSPE-DLLME method was selected for pretreatment of water samples. The μSPE-DLLME method was successfully used for the pre-concentration of five non-steroidal anti-inflammatory drugs in different environmental water samples prior to ultra-high performance liquid chromatography-tandem mass spectrometry. Efficiencies of μSPE and DLLME were thoroughly investigated and optimized in this study. The optimal results were obtained by using 3 mL of 1% formic acid-acetonitrile as elution solvent and dichloroethane and acetonitrile as extractant and disperser solvent, respectively. Limits of detection and quantification of five NSAIDs for different water matrices varied from 0.50 to 1.10 ng L -1 and 0.93 to 2.20 ng L -1 , respectively. Each target analyte had a good linearity in its corresponding concentration range. Enrichment factors of target analytes ranged from 91 to 215. Recoveries of the target analytes were between 72.43 and 113.99% at the concentration levels of 0.02, 0.1, and 0.5 μg L -1 . The developed method was successfully applied to extraction and analysis of NSAIDs in different water samples with satisfactory results which could help us better understand

  6. Synergistic use of Lagrangian dispersion and radiative transfer modelling with satellite and surface remote sensing measurements for the investigation of volcanic plumes: the Mount Etna eruption of 25–27 October 2013

    Directory of Open Access Journals (Sweden)

    P. Sellitto

    2016-06-01

    Full Text Available In this paper we combine SO2 and ash plume dispersion modelling with satellite and surface remote sensing observations to study the regional influence of a relatively weak volcanic eruption from Mount Etna on the optical and micro-physical properties of Mediterranean aerosols. We analyse the Mount Etna eruption episode of 25–27 October 2013. The evolution of the plume along the trajectory is investigated by means of the FLEXible PARTicle Lagrangian dispersion (FLEXPART model. The satellite data set includes true colour images, retrieved values of volcanic SO2 and ash, estimates of SO2 and ash emission rates derived from MODIS (MODerate resolution Imaging Spectroradiometer observations and estimates of cloud top pressure from SEVIRI (Spinning Enhanced Visible and InfraRed Imager. Surface remote sensing measurements of aerosol and SO2 made at the ENEA Station for Climate Observations (35.52° N, 12.63° E; 50 m a.s.l. on the island of Lampedusa are used in the analysis. The combination of these different data sets suggests that SO2 and ash, despite the initial injection at about 7.0 km altitude, reached altitudes around 10–12 km and influenced the column average aerosol particle size distribution at a distance of more than 350 km downwind. This study indicates that even a relatively weak volcanic eruption may produce an observable effect on the aerosol properties at the regional scale. The impact of secondary sulfate particles on the aerosol size distribution at Lampedusa is discussed and estimates of the clear-sky direct aerosol radiative forcing are derived. Daily shortwave radiative forcing efficiencies, i.e. radiative forcing per unit AOD (aerosol optical depth, are calculated with the LibRadtran model. They are estimated between −39 and −48 W m−2 AOD−1 at the top of the atmosphere and between −66 and −49 W m−2 AOD−1 at the surface, with the variability in the estimates mainly depending on the

  7. Case law

    International Nuclear Information System (INIS)

    Anon.

    2011-01-01

    This chapter gathers three case laws, one concerning France and the two others concerning the United States. France - Decision of the Administrative Court in Strasbourg on the permanent shutdown of the Fessenheim nuclear power plant: On 9 March 2011, the administrative court in Strasbourg confirmed the government's rejection to immediately close the Fessenheim nuclear power plant, the first unit of which started operation on 1 January 1978. The court rejected the motion of the 'Association trinationale de protection nucleaire' (ATPN) filed against the decision of the Minister of Economy, Industry and Employment to refuse the final shutdown of the plant. The group, which brings together associations as well as French, German and Swiss municipalities, had taken legal action in December 2008. United States - Case law 1 - Judgment of a US Court of Appeals on public access to sensitive security information and consideration of the environmental impacts of terrorist attacks on nuclear facilities: This case concerns 1) the public's right to access classified and sensitive security information relied upon by the US Nuclear Regulatory Commission (NRC) in its environmental review; and 2) the sufficiency of the NRC's environmental review of the impacts of terrorist attacks for a proposed Independent Spent Fuel Storage Installation (ISFSI). In 2003, the NRC ruled that the National Environmental Policy Act (NEPA) did not require the NRC to consider the impacts of terrorist attacks in its environmental review for the proposed ISFSI at the Diablo Canyon Power Plant. ' NEPA mandates that all federal agencies must prepare a detailed statement on the environment impacts before undertaking a major federal action that significantly affects the human environment. In 2004, the San Luis Obispo Mothers for Peace, a group of individuals who live near the Diablo Canyon Power Plant, filed a petition in the US Court of Appeals for the Ninth Circuit challenging the NRC's 2003 decision. The

  8. Case Law

    International Nuclear Information System (INIS)

    Anon.

    2009-01-01

    Different case law are presented in this part: By decision dated 17 july 2009, the Ontario Court of Appeal (Canada) has ruled on the scope of solicitor-client privilege and the protections that may be afforded to privileged investigations reports. The decision reaffirms the canadian court system view of the importance of the protection of solicitor-client privilege to the administration of justice; For United states here is a judgment of a U.S. court of Appeals on the design basis threat security rule (2009), this case concerns a challenge to the U.S. Nuclear regulatory commission (N.R.C.) revised design basis threat rule, which was adopted in 2007 (nuclear bulletin law no. 80). The petitioners public citizen, Inc., San Luis Obispo Mothers for Peace and the State of New York filed a lawsuit in the U.S. court of appeals for the Ninth circuit alleging that the N.R.C. acted arbitrarily and capriciously and in violation of law by refusing to include the treat of air attacks in its final revised design basis rule. On the 24. july 2009, a panel of three ninth circuit judges rules 2-1 that the N.R.C. acted reasonably in not including an air treat in its design basis rule. Secondly, judgment of a U.S. court of appeals on consideration of the environmental impact of terrorist attacks on nuclear facilities (2009), this case concerns the scope of the U.S. Nuclear regulatory commission environmental analysis during its review of applications to re-licence commercial nuclear power plants. New Jersey urged the N.R.C. to consider the environmental impact of an airborne terrorist attack on the power plant, arguing that such analysis was required by the national environmental policy act (N.E.P.A.). On 31. march 2009, a panel of three circuit judges declined to follow the ninth circuit opinion and affirmed NRC decision 3-0 ruling that NRC was not required to consider terrorism in its N.E.P.A. analysis because NRC re-licensing would not be a reasonably close cause of terrorism

  9. Contradictions of labor law during elections

    Directory of Open Access Journals (Sweden)

    Jorge Márquez

    2015-10-01

    Full Text Available Our article is part of a research to understand Uruguayan labour law through an analysis of the contradictions that arise between the rights and obligations derived from public law rules in the current stage where labour law is dispersed within the voluminous set of rules that conforms Uruguayan law. Our argument focuses particularly on the topic of the working hours that officers and public notaries invest whenever citizenship is convened to vote in the electoral polls, the most important act in a democracy. We hope this publication may arise a debate that contributes to the construction of new rules helping in the creation of a better labour law.

  10. Hydrodynamic dispersion within porous biofilms.

    Science.gov (United States)

    Davit, Y; Byrne, H; Osborne, J; Pitt-Francis, J; Gavaghan, D; Quintard, M

    2013-01-01

    Many microorganisms live within surface-associated consortia, termed biofilms, that can form intricate porous structures interspersed with a network of fluid channels. In such systems, transport phenomena, including flow and advection, regulate various aspects of cell behavior by controlling nutrient supply, evacuation of waste products, and permeation of antimicrobial agents. This study presents multiscale analysis of solute transport in these porous biofilms. We start our analysis with a channel-scale description of mass transport and use the method of volume averaging to derive a set of homogenized equations at the biofilm-scale in the case where the width of the channels is significantly smaller than the thickness of the biofilm. We show that solute transport may be described via two coupled partial differential equations or telegrapher's equations for the averaged concentrations. These models are particularly relevant for chemicals, such as some antimicrobial agents, that penetrate cell clusters very slowly. In most cases, especially for nutrients, solute penetration is faster, and transport can be described via an advection-dispersion equation. In this simpler case, the effective diffusion is characterized by a second-order tensor whose components depend on (1) the topology of the channels' network; (2) the solute's diffusion coefficients in the fluid and the cell clusters; (3) hydrodynamic dispersion effects; and (4) an additional dispersion term intrinsic to the two-phase configuration. Although solute transport in biofilms is commonly thought to be diffusion dominated, this analysis shows that hydrodynamic dispersion effects may significantly contribute to transport.

  11. Case law

    International Nuclear Information System (INIS)

    2013-01-01

    This section reports on 7 case laws from 4 countries: - France: Conseil d'Etat decision, 28 June 2013, refusing to suspend operation of the Fessenheim nuclear power plant; - Slovak Republic: New developments including the Supreme Court's judgment in a matter involving Greenpeace Slovakia's claims regarding the Mochovce nuclear power plant; New developments in the matter involving Greenpeace's demands for information under the Freedom of Information Act; - Switzerland: Judgment of the Federal Supreme Court in the matter of the Departement federal de l'environnement, des transports, de l'energie et de la communication (DETEC) against Ursula Balmer-Schafroth and others on consideration of admissibility of a request to withdraw the operating licence for the Muehleberg nuclear power plant; - United States: Judgment of the Court of Appeals for the District of Columbia Circuit granting petition for writ of mandamus ordering US Nuclear Regulatory Commission (NRC) to resume Yucca Mountain licensing; Judgment of the Court of Appeals for the Second Circuit invalidating two Vermont statutes as preempted by the Atomic Energy Act; Judgment of the NRC on transferring Shieldalloy site to New Jersey's jurisdiction

  12. Case Law

    International Nuclear Information System (INIS)

    2014-01-01

    This section treats of the following case laws sorted by country: 1 - Germany: Federal Administrative Court confirms the judgments of the Higher Administrative Court of the Land Hesse: The shutdown of nuclear power plant Biblis blocks A and B based on a 'moratorium' imposed by the Government was unlawful; List of lawsuits in the nuclear field. 2 - Slovak Republic: Further developments in cases related to the challenge by Greenpeace Slovakia to the Mochovce nuclear power plant; Developments in relation to the disclosure of information concerning the Mochovce nuclear power plant. 3 - United States: Judgment of the Nuclear Regulatory Commission resuming the licensing process for the Department of Energy's construction authorisation application for the Yucca Mountain high-level radioactive waste repository; Judgment of the Licensing Board in favour of Shaw AREVA MOX Services regarding the material control and accounting system at the proposed MOX Facility; Dismissal by US District Court Judge of lawsuit brought by US military personnel against Tokyo Electric Power Company (TEPCO) in connection with the Fukushima Daiichi nuclear power plant accident

  13. Case law

    International Nuclear Information System (INIS)

    Anon.

    2000-01-01

    This article reviews the judgements and law decisions concerning nuclear activities throughout the world during the end of 1999 and the first semester 2000. In Belgium a judgement has allowed the return of nuclear waste from France. In France the Council of State confirmed the repeal of an authorization order of an installation dedicated to the storage of uranium sesquioxide, on the basis of an insufficient risk analysis. In France too, the criminal chamber of the French Supreme Court ruled that the production in excess of that authorized in the licence can be compared to carrying out operations without a licence. In Japan the Fukui district court rejected a lawsuit filed by local residents calling for the permanent closure, on safety grounds, of the Monju reactor. In the Netherlands, the Council of State ruled that the Dutch government had no legal basis for limiting in time the operating licence of the Borssele plant. In Usa a district court has rejected a request to ban MOX fuel shipment. (A.C.)

  14. Law and Gospel or Gospel and Law? Karl Barth, Martin Luther and John Calvin

    Directory of Open Access Journals (Sweden)

    I. John Hesselink

    2012-05-01

    Full Text Available For Calvin the order of the law-gospel relation may be put this way: Law of creation (natural law – revealed law (the law of Moses – the gospel – the gracious law (third use as a norm and guide for believers. The same outline would follow for Luther except that the third or positive use of the law plays a minor role in his thinking. On the surface Barth would seem to have more affinity with Calvin but the differences are significant because of Barth’s rejection of any notion of the antithesis of law and gospel and his subsuming the law in all its functions under God’s grace.

  15. Recent publications on environmental law

    International Nuclear Information System (INIS)

    Lohse, S.

    1989-01-01

    The bibliography contains 1160 references to publications covering the following subject fields: General environmental law; environmental law in relation to constitutional law, administrative law, procedural law, revenue law, criminal law, private law, industrial law; law of regional development; nature conservation law; law on water protection; waste management law; law on protection against harmful effects on the environment; atomic energy law and radiation protection law; law of the power industry and the mining industry; laws and regulations on hazardous material and environmental hygiene. (orig./HP) [de

  16. Recent publications on environmental law

    International Nuclear Information System (INIS)

    Lohse, S.

    1988-01-01

    The bibliography contains 1235 references to publications covering the following subject fields: general environmental law; environmental law in relation to constitutional law, administrative law, procedural law, revenue law, criminal law, private law, industrial law; law of regional development; nature conservation law; law on water protection; waste management law; law on protection against harmful effects on the environment; atomic energy law and radiation protection law; law of the power industry and the mining industry; laws and regulations on hazardous material and environmental hygiene. (HP) [de

  17. Variational approaches to conservation laws for a nonlinear ...

    African Journals Online (AJOL)

    The conservation laws of a nonlinear evolution equation of time dependent variable coefficients of damping and dispersion is studied. The equation under consideration is not derivable from a variational principle which means that one cannot appeal to the Noether theorem to determine the conservation laws. We utilize the ...

  18. International Investment Law and EU Law

    DEFF Research Database (Denmark)

    The European Yearbook of International Economic Law (EYIEL) is an annual publication in International Economic Law, a field increasingly emancipating itself from Public International Law scholarship and evolving into a fully-fledged academic discipline in its own right. With the yearbook, the edi......The European Yearbook of International Economic Law (EYIEL) is an annual publication in International Economic Law, a field increasingly emancipating itself from Public International Law scholarship and evolving into a fully-fledged academic discipline in its own right. With the yearbook...

  19. Effect of variable viscosity on free flow of non-Newtonian power-law fluids along a vertical surface with thermal stratification

    Directory of Open Access Journals (Sweden)

    Moorthy M.B.K.

    2013-02-01

    Full Text Available The aim of this paper is to investigate the effect of thermal stratification together with variable viscosity on free convection flow of non- Newtonian fluids along a nonisothermal semi infinite vertical plate embedded in a saturated porous medium. The governing equations of continuity, momentum and energy are transformed into nonlinear ordinary differential equations using similarity transformations and then solved by using the Runge-Kutta-Gill method along with shooting technique. Governing parameters for the problem under study are the variable viscosity, thermal stratification parameter, non-Newtonian parameter and the power-law index parameter.The velocity and temperature distributions are presented and discussed. The Nusselt number is also derived and discussed numerically.

  20. Dispersion management with metamaterials

    Science.gov (United States)

    Tassin, Philippe; Koschny, Thomas; Soukoulis, Costas M.

    2017-03-07

    An apparatus, system, and method to counteract group velocity dispersion in fibers, or any other propagation of electromagnetic signals at any wavelength (microwave, terahertz, optical, etc.) in any other medium. A dispersion compensation step or device based on dispersion-engineered metamaterials is included and avoids the need of a long section of specialty fiber or the need for Bragg gratings (which have insertion loss).

  1. Case law

    International Nuclear Information System (INIS)

    2015-01-01

    This section treats of the following case laws: 1 - Canada: Decision of the Canadian Federal Court of Appeal overturning a decision to send back for reconsideration an environmental assessment of a proposed new nuclear power plant in Ontario; 2 - France: Council of State decision, 28 November 2014, Federation 'Reseau sortir du nucleaire' (Nuclear Phase-Out network) and others vs. Electricite de France (EDF), Request No. 367013 for the annulment of: - The resolution of the French Nuclear Safety Authority (ASN) dated 4 July 2011 specifying additional regulations for Electricite de France (EDF) designed to strengthen the reactor basemat of reactor No. 1 in the Fessenheim nuclear power plant, and - The resolution of ASN dated 19 December 2012 approving the start of work on reinforcing the reactor basemat in accordance with the dossier submitted by EDF; 3 - Germany: Judgment of the European Court of Justice on the nuclear fuel tax; 4 - India: Judgment of the High Court of Kerala in a public interest litigation challenging the constitutional validity of the Civil Liability for Nuclear Damage Act, 2010; 5 - Japan - District court decisions on lawsuits related to the restart of Sendai NPP and Takahama NPP; 6 - Poland: Decision of the Masovian Voivod concerning the legality of the resolution on holding a local referendum in the Commune of Rozan regarding a new radioactive waste repository; Certain provisions of the Regulation of the Minister of Health of 18 February 2011 on the conditions for safe use of ionising radiation for all types of medical exposure have been declared unconstitutional by a judgment pronounced by the Constitutional Tribunal; 7 - Slovak Republic: Developments in relation to the disclosure of information concerning the Mochovce nuclear power plant

  2. The French nuclear law

    International Nuclear Information System (INIS)

    Ito, Hiroshi

    2013-01-01

    The nuclear law had been out of the environmental law. The act on the transparency and the security of the nuclear matter was enacted in 2006 and set in the code of the environment in 2012. It means that the nuclear law is part of the environmental law and that it is advanced. I will report the French nuclear law. (author)

  3. Demonstrating the Gas Laws.

    Science.gov (United States)

    Holko, David A.

    1982-01-01

    Presents a complete computer program demonstrating the relationship between volume/pressure for Boyle's Law, volume/temperature for Charles' Law, and volume/moles of gas for Avagadro's Law. The programing reinforces students' application of gas laws and equates a simulated moving piston to theoretical values derived using the ideal gas law.…

  4. Vapor-phase photo-oxidation of methanol over nano-size titanium dioxide clusters dispersed in MCM-41 host material part 2: catalytic properties and surface transient species.

    Science.gov (United States)

    Bhattacharyya, K; Varma, S; Kumar, D; Tripathi, A K; Gupta, N M

    2005-05-01

    We report in this paper on the ultraviolet-assisted vapor-phase oxidation of methanol at room temperature, with the help of nano-size clusters of titanium dioxide dispersed in an MCM-41 silicate matrix. The surface species formed during the adsorption/oxidation of methanol and the transformation that they undergo as a result of ultraviolet irradiation were monitored using in-situ Fourier transform infrared and thermal desorption spectroscopy techniques. Parallel experiments conducted on TiO2/MCM, bulk titania, and pristine MCM-41 samples helped in identifying the individual role of titanium dioxide and host matrix in these processes. The photo-catalytic oxidation of methanol, at concentrations of 0.1 to 1.1 mol% in air, gave rise to formation of CO2 and H2O as products, for both the TiO2/MCM and bulk TiO2 samples. No such reaction occurred on titania-free MCM. Furthermore, the rate of reaction depended upon the TiO2 content of a sample and also on the concentration of methanol in reaction mixture. Thus, the rate of conversion increased progressively with the increase in TiO2 loading from 5 to 21 wt% in TiO2/MCM samples, particularly for the experiments with high concentration of methanol. For low methanol concentration (0.1 mol%) in air, the effect of titania content in MCM was very small. The specific activity (per g of titania) of a sample, on the other hand, showed an inverse relationship with the loading of titanium dioxide in a sample. Infrared and temperature-programmed desorption results revealed that the mode of CH3OH adsorption and the reactivity of the transient species formed during the oxidation process were independent of the size of dispersed titania particles. Thus, the particles of approximately 2-6 nm size, present in TiO2/MCM, exhibited a chemisorption behavior similar to that of the bulk titania. The results of the present study provide strong evidence that the hydroxyl groups, both on the host matrix and at the titania sites, participate

  5. Dispersant field monitoring procedures

    International Nuclear Information System (INIS)

    Hillman, S. O.; Hood, S. D.; Bronson, M. T.; Shufelt, G.

    1997-01-01

    Alyeska Pipeline Service Company's (APSC) dispersant response capability in the Port of Valdez, Prince William Sound, and in the Gulf of Alaska was described. APSC provides dispersal equipment, aerial spray delivery systems, helibucket delivery systems, vessel delivery systems, along with a minimum of 600,000 gallon stockpile of the dispersant Corexit 9527. Effectiveness and effects are monitored by visual observation. In addition, fluorometer and water sample analysis are also used to provide field analytical data indicative of the environmental effects of dispersant applications. The field monitoring plan was field tested in December 1996. Details of the monitoring procedures are outlined in this paper. 18 refs., 5 tabs

  6. Topography evolution of 500 keV Ar(4+) ion beam irradiated InP(100) surfaces - formation of self-organized In-rich nano-dots and scaling laws.

    Science.gov (United States)

    Sulania, Indra; Agarwal, Dinesh C; Kumar, Manish; Kumar, Sunil; Kumar, Pravin

    2016-07-27

    We report the formation of self-organized nano-dots on the surface of InP(100) upon irradiating it with a 500 keV Ar(4+) ion beam. The irradiation was carried out at an angle of 25° with respect to the normal at the surface with 5 different fluences ranging from 1.0 × 10(15) to 1.0 × 10(17) ions per cm(2). The morphology of the ion-irradiated surfaces was examined by atomic force microscopy (AFM) and the formation of the nano-dots on the irradiated surfaces was confirmed. The average size of the nano-dots varied from 44 ± 14 nm to 94 ± 26 nm with increasing ion fluence. As a function of the ion fluence, the variation in the average size of the nano-dots has a great correlation with the surface roughness, which changes drastically up to the ion fluence of 1.0 × 10(16) ions per cm(2) and attains almost a saturation level for further irradiation. The roughness and the growth exponent values deduced from the scaling laws suggest that the kinetic sputtering and the large surface diffusion steps of the atoms are the primary reasons for the formation of the self-organized nanodots on the surface. X-ray photo-electron spectroscopy (XPS) studies show that the surface stoichiometry changes with the ion fluence. With irradiation, the surface becomes more indium (In)-rich owing to the preferential sputtering of the phosphorus atoms (P) and the pure metallic In nano-dots evolve at the highest ion fluence. The cross-sectional scanning electron microscopy (SEM) analysis of the sample irradiated with the highest fluence showed the absence of the nanostructuring beneath the surface. The surface morphological changes at this medium energy ion irradiation are discussed in correlation with the low and high energy experiments to shed more light on the mechanism of the well separated nano-dot formation.

  7. Dispersion effect and auto-reconditioning performance of nanometer ...

    Indian Academy of Sciences (India)

    The results showed that the combinative method of ultrasonic dispersion, mechanical agitation and surface modification could improve the dispersion uniformity and stability of nanometer WS2 particles in the green lubricant effectively. And the optimal ratio of the mass between surface modifier and nanometer WS2 particles ...

  8. On the Dispersal of Young Stellar Hierarchies

    Science.gov (United States)

    Elmegreen, Bruce G.

    2018-01-01

    Hierarchical structure in young star fields has been demonstrated in a variety of ways, including two-point correlation functions (TPCFs) that are power laws for spatial scales up to at least several hundred parsecs. As the stars age, this power law decreases in slope until it becomes nearly flat at ∼100 Myr, at which point the hierarchical structure has disappeared. The fact that the TPCF remains nearly a power law during this time implies that the dispersal mechanism is somewhat independent of scale. This rules out dispersal by random stellar motions at either the local gas turbulent speed or a constant speed, because in both cases the hierarchy would disappear at small scales first, causing the TPCF to bend over. Destruction by shear has the right property, as the shear rate in a galaxy is independent of scale for kiloparsec-size regions, but shear converts the hierarchy into an azimuthal stream, which still has a power-law TPCF. What does explain the observation is the overlapping of several independent hierarchies from successive generations of star formation in the same region. If stellar age is determined from magnitude intervals on the main sequence of a color–magnitude diagram, or if cluster ages are grouped together logarithmically into bins, then multiple generations will overlap more and more as the grouped populations age, and this overlap will lower the spatial correlations between group members. Models of these processes illustrate their relative roles in removing the appearance of young stellar hierarchies.

  9. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    2004-06-07

    Jun 7, 2004 ... customary law and decisions of the Supreme Court and of the previous Black Appeals. Court. The informal or unofficial customary law consists of unwritten rules and norms rooted in the social and cultural practices of indigenous communities. Rules of customary law create gender inequality and women are ...

  10. Law Enforcement Locations

    Data.gov (United States)

    Kansas Data Access and Support Center — Law Enforcement Locations in Kansas Any location where sworn officers of a law enforcement agency are regularly based or stationed. Law enforcement agencies "are...

  11. Tenancy Law Denmark

    DEFF Research Database (Denmark)

    Edlund, Hans Henrik

    2003-01-01

    Report on Danish Tenancy Law. Contribution to a research project co-financed by the Grotius Programme for Judicial Co-Operation in Civil Matters. http://www.iue.it/LAW/ResearchTeaching/EuropeanPrivateLaw/Projects.shtml......Report on Danish Tenancy Law. Contribution to a research project co-financed by the Grotius Programme for Judicial Co-Operation in Civil Matters. http://www.iue.it/LAW/ResearchTeaching/EuropeanPrivateLaw/Projects.shtml...

  12. Czech Atomic Law

    OpenAIRE

    Valuš, Josef

    2006-01-01

    The Czech Nuclear law The Nuclear law is an importnat part of the Environmental law. The Nuclear law regulates the peaceful use of nuclear energy and of inonizing radiation, which are the activities potentially dangerous for the environment. This area is a component of a special part of the Environmental law. The ionizing radiation is classified as a particular source of hazard to the environment. This diploma thesis deals with the Czech Nuclear law, and that by means of characterization of a...

  13. Dispersal of forest insects

    Science.gov (United States)

    Mcmanus, M. L.

    1979-01-01

    Dispersal flights of selected species of forest insects which are associated with periodic outbreaks of pests that occur over large contiguous forested areas are discussed. Gypsy moths, spruce budworms, and forest tent caterpillars were studied for their massive migrations in forested areas. Results indicate that large dispersals into forested areas are due to the females, except in the case of the gypsy moth.

  14. Numerical investigation of magnetohydrodynamic slip flow of power-law nanofluid with temperature dependent viscosity and thermal conductivity over a permeable surface

    Science.gov (United States)

    Hussain, Sajid; Aziz, Asim; Khalique, Chaudhry Masood; Aziz, Taha

    2017-12-01

    In this paper, a numerical investigation is carried out to study the effect of temperature dependent viscosity and thermal conductivity on heat transfer and slip flow of electrically conducting non-Newtonian nanofluids. The power-law model is considered for water based nanofluids and a magnetic field is applied in the transverse direction to the flow. The governing partial differential equations(PDEs) along with the slip boundary conditions are transformed into ordinary differential equations(ODEs) using a similarity technique. The resulting ODEs are numerically solved by using fourth order Runge-Kutta and shooting methods. Numerical computations for the velocity and temperature profiles, the skin friction coefficient and the Nusselt number are presented in the form of graphs and tables. The velocity gradient at the boundary is highest for pseudoplastic fluids followed by Newtonian and then dilatant fluids. Increasing the viscosity of the nanofluid and the volume of nanoparticles reduces the rate of heat transfer and enhances the thickness of the momentum boundary layer. The increase in strength of the applied transverse magnetic field and suction velocity increases fluid motion and decreases the temperature distribution within the boundary layer. Increase in the slip velocity enhances the rate of heat transfer whereas thermal slip reduces the rate of heat transfer.

  15. Numerical investigation of magnetohydrodynamic slip flow of power-law nanofluid with temperature dependent viscosity and thermal conductivity over a permeable surface

    Directory of Open Access Journals (Sweden)

    Hussain Sajid

    2017-12-01

    Full Text Available In this paper, a numerical investigation is carried out to study the effect of temperature dependent viscosity and thermal conductivity on heat transfer and slip flow of electrically conducting non-Newtonian nanofluids. The power-law model is considered for water based nanofluids and a magnetic field is applied in the transverse direction to the flow. The governing partial differential equations(PDEs along with the slip boundary conditions are transformed into ordinary differential equations(ODEs using a similarity technique. The resulting ODEs are numerically solved by using fourth order Runge-Kutta and shooting methods. Numerical computations for the velocity and temperature profiles, the skin friction coefficient and the Nusselt number are presented in the form of graphs and tables. The velocity gradient at the boundary is highest for pseudoplastic fluids followed by Newtonian and then dilatant fluids. Increasing the viscosity of the nanofluid and the volume of nanoparticles reduces the rate of heat transfer and enhances the thickness of the momentum boundary layer. The increase in strength of the applied transverse magnetic field and suction velocity increases fluid motion and decreases the temperature distribution within the boundary layer. Increase in the slip velocity enhances the rate of heat transfer whereas thermal slip reduces the rate of heat transfer.

  16. Dispersion and space charge

    International Nuclear Information System (INIS)

    Venturini, M.; Kishek, R.A.; Reiser, M.

    1998-01-01

    The presence of space charge affects the value of the dispersion function. On the other hand dispersion has a role in shaping the beam distribution and therefore in determining the resulting forces due to space charge. In this paper we present a framework where the interplay between space charge and dispersion for a continuous beam can be simultaneously treated. We revise the derivation of a new set of rms envelope-dispersion equations we have recently proposed in [1]. The new equations generalize the standard rms envelope equations currently used for matching to the case where bends and a longitudinal momentum spread are present. We report a comparison between the solutions of the rms envelope-dispersion equations and the results obtained using WARP, a Particle in Cell (PIC) code, in the modeling of the Maryland Electron Ring. copyright 1998 American Institute of Physics

  17. Dispersion and space charge

    Energy Technology Data Exchange (ETDEWEB)

    Venturini, M. [Department of Physics and Institute for Plasma Research, University of Maryland, College Park, Maryland 20742 (United States); Kishek, R.A.; Reiser, M. [Department of Electrical Engeneering and Institute for Plasma Research, University of Maryland, College Park, Maryland 20742 (United States)

    1998-11-01

    The presence of space charge affects the value of the dispersion function. On the other hand dispersion has a role in shaping the beam distribution and therefore in determining the resulting forces due to space charge. In this paper we present a framework where the interplay between space charge and dispersion for a continuous beam can be simultaneously treated. We revise the derivation of a new set of rms envelope-dispersion equations we have recently proposed in [1]. The new equations generalize the standard rms envelope equations currently used for matching to the case where bends and a longitudinal momentum spread are present. We report a comparison between the solutions of the rms envelope-dispersion equations and the results obtained using WARP, a Particle in Cell (PIC) code, in the modeling of the Maryland Electron Ring. {copyright} {ital 1998 American Institute of Physics.}

  18. Dispersion and space charge

    International Nuclear Information System (INIS)

    Venturini, Marco; Kishek, Rami A.; Reiser, Martin

    1998-01-01

    The presence of space charge affects the value of the dispersion function. On the other hand dispersion has a role in shaping the beam distribution and therefore in determining the resulting forces due to space charge. In this paper we present a framework where the interplay between space charge and dispersion for a continuous beam can be simultaneously treated. We revise the derivation of a new set of rms envelope-dispersion equations we have recently proposed. The new equations generalize the standard rms envelope equations currently used for matching to the case where bends and a longitudinal momentum spread are present. We report a comparison between the solutions of the rms envelope-dispersion equations and the results obtained using WARP, a Particle in Cell (PIC) code, in the modeling of the Maryland Electron Ring

  19. Dispersion mechanisms of carbon black in an elastomer matrix

    OpenAIRE

    Collin, Véronique; Peuvrel-Disdier, Edith

    2005-01-01

    International audience; Dispersion mechanisms of carbon black pellets in an uncured SBR elastomer matrix under shear conditions were studied using a rheo-optical approach. A transparent counter-rotating plate-and-plate shear cell coupled with an optical microscope was used. Elementary mechanisms of dispersion such as rupture, erosion of isolated carbon black pellets were investigated. A criterion for rupture and an erosion law were determined. The rupture mechanism was shown to be governed by...

  20. Influence of particle and surface quality on the vitrinite reflectance of dispersed organic matter: Comparative exercise using data from the qualifying system for reflectance analysis working group of ICCP

    Science.gov (United States)

    Borrego, A.G.; Araujo, C.V.; Balke, A.; Cardott, B.; Cook, A.C.; David, P.; Flores, D.; Hamor-Vido, M.; Hiltmann, W.; Kalkreuth, W.; Koch, J.; Kommeren, C.J.; Kus, J.; Ligouis, B.; Marques, M.; Mendonca, Filho J.G.; Misz, M.; Oliveira, L.; Pickel, W.; Reimer, K.; Ranasinghe, P.; Suarez-Ruiz, I.; Vieth, A.

    2006-01-01

    The development of a qualifying system for reflectance analysis has been the scope of a working group within the International Committee for Coal and Organic Petrology (ICCP) since 1999, when J. Koch presented a system to qualify vitrinite particles according to their size, proximity to bright components and homogeneity of the surface. After some years of work aimed at improving the classification system using photomicrographs, it was decided to run a round robin exercise on microscopy samples. The classification system tested consists of three qualifiers ranging from excellent to low quality vitrinites with an additional option for unsuitable vitrinites. This paper reports on the results obtained by 22 analysts who were asked to measure random reflectance readings on vitrinite particles assigning to each reading a qualifier. Four samples containing different organic matter types and a variety of vitrinite occurrences have been analysed. Results indicated that the reflectance of particles classified as excellent, good or poor compared to the total average reflectance did not show trends to be systematically lower or higher for the four samples analysed. The differences in reflectance between the qualifiers for any given sample were lower than the scatter of vitrinite reflectance among participants. Overall, satisfactory results were obtained in determining the reflectance of vitrinite in the four samples analysed. This was so for samples having abundant and easy to identify vitrinites (higher plant-derived organic matter) as well as for samples with scarce and difficult to identify particles (samples with dominant marine-derived organic matter). The highest discrepancies were found for the organic-rich oil shales where the selection of the vitrinite population to measure proved to be particularly difficult. Special instructions should be provided for the analysis of this sort of samples. The certainty of identification of the vitrinite associated with the vitrinite

  1. Design and development of a dust dispersion chamber to quantify the dispersibility of rock dust.

    Science.gov (United States)

    Perera, Inoka E; Sapko, Michael J; Harris, Marcia L; Zlochower, Isaac A; Weiss, Eric S

    2016-01-01

    Dispersible rock dust must be applied to the surfaces of entries in underground coal mines in order to inert the coal dust entrained or made airborne during an explosion and prevent propagating explosions. 30 CFR. 75.2 states that "… [rock dust particles] when wetted and dried will not cohere to form a cake which will not be dispersed into separate particles by a light blast of air …" However, a proper definition or quantification of "light blast of air" is not provided. The National Institute for Occupational Safety and Health (NIOSH) has, consequently, designed a dust dispersion chamber to conduct quantitative laboratory-scale dispersibility experiments as a screening tool for candidate rock dusts. A reproducible pulse of air is injected into the chamber and across a shallow tray of rock dust. The dust dispersed and carried downwind is monitored. The mass loss of the dust tray and the airborne dust measurements determine the relative dispersibility of the dust with respect to a Reference rock dust. This report describes the design and the methodology to evaluate the relative dispersibility of rock dusts with and without anti-caking agents. Further, the results of this study indicate that the dispersibility of rock dusts varies with particle size, type of anti-caking agent used, and with the untapped bulk density. Untreated rock dusts, when wetted and dried forming a cake that was much less dispersible than the reference rock dust used in supporting the 80% total incombustible content rule.

  2. Dispersal and metapopulation stability

    Directory of Open Access Journals (Sweden)

    Shaopeng Wang

    2015-10-01

    Full Text Available Metapopulation dynamics are jointly regulated by local and spatial factors. These factors may affect the dynamics of local populations and of the entire metapopulation differently. Previous studies have shown that dispersal can stabilize local populations; however, as dispersal also tends to increase spatial synchrony, its net effect on metapopulation stability has been controversial. Here we present a simple metapopulation model to study how dispersal, in interaction with other spatial and local processes, affects the temporal variability of metapopulations in a stochastic environment. Our results show that in homogeneous metapopulations, the local stabilizing and spatial synchronizing effects of dispersal cancel each other out, such that dispersal has no effect on metapopulation variability. This result is robust to moderate heterogeneities in local and spatial parameters. When local and spatial dynamics exhibit high heterogeneities, however, dispersal can either stabilize or destabilize metapopulation dynamics through various mechanisms. Our findings have important theoretical and practical implications. We show that dispersal functions as a form of spatial intraspecific mutualism in metapopulation dynamics and that its effect on metapopulation stability is opposite to that of interspecific competition on local community stability. Our results also suggest that conservation corridors should be designed with appreciation of spatial heterogeneities in population dynamics in order to maximize metapopulation stability.

  3. Accurate dispersion calculations: AUSTAL2000

    International Nuclear Information System (INIS)

    Janicke, U.

    2005-01-01

    Until the 2002 amendment of the Clean Air Technical Code of 1968, Annex C of this regulation required standard pollutant emission forecasts to be based on the Gaussian flag model. It was clear even at the time of the Code's initial promulgation that this model is only valid in a very narrow application range and in particular not in cases of sources close to ground level, low ground surface roughness and complex dispersion situations. In German licensing procedures there has been for this reason an increasing use of more complex models over the past 10 years, the most frequently used of which today is a Lagrangian dispersion model. This model type was standardised in VDI (Association of German Engineers) Guideline 3945 Sheet 3 in the year 2000. In the course of amending the Clean Air Technical Code in accordance with the new EU Framework Directive the decision was taken at the Environmental Protection Office to replace the Gaussian model with the Lagrangian model as described in VDI 3945 Sheet 3. Using the LASAT dispersion model as a basis the AUSTAL2000 program system has now been developed, providing an example of how the algorithms of Annex 3 of the Clean Air Technical Code can be used in practice. AUSTAL2000 has been available on the Internet since the year 2002 along with source text, documentation and example calculations

  4. A Forging Hardness Dispersion Effect on the Energy Consumption of Machining

    Directory of Open Access Journals (Sweden)

    L. D. Mal'kova

    2015-01-01

    Full Text Available The aim of the work is to evaluate a hardness dispersion of forgings to be further machined, and analyse the impact of this dispersion on the resulting power consumption when cutting.The paper studies the hardness values of three kinds of parts for automotive manufacturing. Sample of each part was n = 100 pieces. Analysis of measurements showed that 46% - 93% of parts meet requirements for a range defined by the work-piece working drawing. It was found that hardness of one batch of forgings is under dispersion, which distribution is governed by the normal law.The work provides calculations for machining the external cylindrical surfaces of the considered parts. In the context of calculating are adopted parameters of the enterprise-processing rate. It is found that power consumption of machining because of the dispersion values of the work-piece hardness is a function of the random BH variable and it itself is a random variable. Two types of samples are considered, namely: the full sample and that of the values that meet requirements for hardness. The coefficient of variation for samples that meet the technical requirements for hardness is lower than for the full samples, so their average value is more reliable characteristic of a set. It was also found that to ensure a reliable prediction of power consumption in designing the manufacturing processes it is necessary to reduce a tolerance range of workpiece hardness to the limit.The work gives a comparative evaluation of electric power consumption per unit cylindrical surface of the parts under consideration. A relative change in the electric power consumed at the minimum and maximum levels of the hardness value was introduced as an evaluation criterion. It is found that with changing hardness of machined work-pieces within the tolerance, the change in power consumption in machining the unit surface reaches 16% while in the case its being out of the specified range it does 47%.

  5. Non-Fickian dispersive transport of strontium in laboratory-scale columns: Modelling and evaluation

    Science.gov (United States)

    Liu, Dongxu; Jivkov, Andrey P.; Wang, Lichun; Si, Gaohua; Yu, Jing

    2017-06-01

    In the context of environmental remediation of contaminated sites and safety assessment of nuclear waste disposal in the near-surface zone, we investigate the leaching and non-Fickian dispersive migration with sorption of strontium (mocking strontium-90) through columns packed with sand and clay. Analysis is based on breakthrough curves (BTCs) from column experiments, which simulated rainfall infiltration and source term release scenario, rather than applying constant tracer solution at the inlet as commonly used. BTCs are re-evaluated and transport parameters are estimated by inverse modelling using two approaches: (1) equilibrium advection-dispersion equation (ADE); and (2) continuous time random walk (CTRW). Firstly, based on a method for calculating leach concentration, the inlet condition with an exponential decay input is identified. Secondly, the results show that approximately 39%-58% of Br- and 16%-49% of Sr2+ are eluted from the columns at the end of the breakthrough experiments. This suggests that trapping mechanisms, including diffusion into immobile zones and attachment of tracer on mineral surfaces, are more pronounced for Sr2+ than for Br-. Thirdly, we demonstrate robustness of CTRW-based truncated power-law (TPL) model in capturing non-Fickian reactive transport with 0 2. The non-Fickian dispersion observed experimentally is explained by variations of local flow field from preferential flow paths due to physical heterogeneities. Particularly, the additional sorption process of strontium on clay minerals contributes to the delay of the peak concentration and the tailing features, which leads to an enhanced non-Fickian transport for strontium. Finally, the ADE and CTRW approaches to environmental modelling are evaluated. It is shown that CTRW with a sorption term can describe non-Fickian dispersive transport of strontium at laboratory scale by identifying appropriate parameters, while the traditional ADE with a retardation factor fails to reproduce

  6. Tax Law System

    Science.gov (United States)

    Tsindeliani, Imeda A.

    2016-01-01

    The article deals with consideration of the actual theoretic problems of the subject and system of tax law in Russia. The theoretical approaches to determination of the nature of separate institutes of tax law are represented. The existence of pandect system intax law building as financial law sub-branch of Russia is substantiated. The goal of the…

  7. Teaching Human Rights Law.

    Science.gov (United States)

    Berman, Howard R.

    1985-01-01

    The international community has developed a system of human rights law relevant to many areas of legal encounter, which American law schools have been slow to incorporate into curricula. Teaching human rights law provides an opportunity for law schools to enrich the learning process and contribute creatively to the respect for rights in society.…

  8. Democratic contract law

    NARCIS (Netherlands)

    Hesselink, M.W.

    2015-01-01

    This article discusses the normative relationship between contract law and democracy. In particular, it argues that in order to be legitimate contract law needs to have a democratic basis. Private law is not different in this respect from public law. Thus, the first claim made in this article will

  9. Adsorption of an anionic dispersant on lignite

    Energy Technology Data Exchange (ETDEWEB)

    Yavuz, R.; Kucukbayrak, S. [Istanbul Technical University, Istanbul (Turkey). Dept. of Chemical Engineering, Chemical & Metallurgical Engineering Faculty

    2001-12-01

    Since coal is not a homogeneous substance but a mixture of carbonaceous materials and mineral matter, it has a variety of surface properties. Therefore, it is not easy to control the properties of coal suspensions by simply adjusting variables, such as pH and/or electrolyte. A chemical agent needs to be added to control the properties of the coal suspensions. The adsorption behavior of an anionic dispersant in the presence of a wetting agent using some Turkish lignite samples was investigated. The effects of dispersant concentration, temperature and pH on the dispersant adsorption were studied systematically, and the experimental results are presented. Pellupur B69 as a dispersant, commercial mixture of formaldehyde condensate sodium salt of naphthalene sulphonic acid, and Texapon N{sub 2}5 as a wetting agent, a sodium lauryl ether sulfate, have been used.

  10. Law across nations

    DEFF Research Database (Denmark)

    of participants keen to work together to promote research and policy development in such a lively forum." - Professor Steve Saxby PhD, Cert Ed., MBCS Professor of IT Law and Public Policy, Solicitor, Deputy Head of School (Research), Faculty of Business and Law, University of Southampton, Editor......-in-Chief, The Computer Law & Security Review - The International Journal of Technology Law and Practice (Elsevier), www.elsevier.com/locate/clsr, Editor, The Encyclopedia of Information Technology Law (Sweet & Maxwell), Director ILAWS - Institute for Law and the Web - School of Law, Southampton University, www...

  11. Law across nations

    DEFF Research Database (Denmark)

    of participants keen to work together to promote research and policy development in such a lively forum." - Professor Steve Saxby PhD, Cert Ed., MBCS Professor of IT Law and Public Policy, Solicitor, Deputy Head of School (Research), Faculty of Business and Law, University of Southampton, Editor...... not only the original themes of Legal, Security and Privacy Issues in IT Law and International Law and Trade but more recently two new conferences on International Public and Private Law. The papers in this volume then represent the contributions to all these fields and reflect the strong desire......-in-Chief, The Computer Law & Security Review - The International Journal of Technology Law and Practice (Elsevier), www.elsevier.com/locate/clsr, Editor, The Encyclopedia of Information Technology Law (Sweet & Maxwell), Director ILAWS - Institute for Law and the Web - School of Law, Southampton University, www...

  12. Effective dielectric response of dispersions of graded particles

    Science.gov (United States)

    Sushko, M. Ya.

    2017-12-01

    Based upon our compact group approach and the Hashin-Shtrikman variational theorem, we propose a solution, which effectively incorporates many-particle effects in concentrated systems, to the problem of the effective quasistatic permittivity of dispersions of graded dielectric particles. After the theory is shown to recover existing analytical results and simulation data for dispersions of hard dielectric spheres with power-law permittivity profiles, we use it to describe the effective dielectric response of nonconducting polymer-ceramic composites modeled as dispersions of dielectric core-shell particles. Possible generalizations of the results are specified.

  13. Hydrodynamic dispersion within porous biofilms

    KAUST Repository

    Davit, Y.

    2013-01-23

    Many microorganisms live within surface-associated consortia, termed biofilms, that can form intricate porous structures interspersed with a network of fluid channels. In such systems, transport phenomena, including flow and advection, regulate various aspects of cell behavior by controlling nutrient supply, evacuation of waste products, and permeation of antimicrobial agents. This study presents multiscale analysis of solute transport in these porous biofilms. We start our analysis with a channel-scale description of mass transport and use the method of volume averaging to derive a set of homogenized equations at the biofilm-scale in the case where the width of the channels is significantly smaller than the thickness of the biofilm. We show that solute transport may be described via two coupled partial differential equations or telegrapher\\'s equations for the averaged concentrations. These models are particularly relevant for chemicals, such as some antimicrobial agents, that penetrate cell clusters very slowly. In most cases, especially for nutrients, solute penetration is faster, and transport can be described via an advection-dispersion equation. In this simpler case, the effective diffusion is characterized by a second-order tensor whose components depend on (1) the topology of the channels\\' network; (2) the solute\\'s diffusion coefficients in the fluid and the cell clusters; (3) hydrodynamic dispersion effects; and (4) an additional dispersion term intrinsic to the two-phase configuration. Although solute transport in biofilms is commonly thought to be diffusion dominated, this analysis shows that hydrodynamic dispersion effects may significantly contribute to transport. © 2013 American Physical Society.

  14. Surface emitting ring quantum cascade lasers for chemical sensing

    Science.gov (United States)

    Szedlak, Rolf; Hayden, Jakob; Martín-Mateos, Pedro; Holzbauer, Martin; Harrer, Andreas; Schwarz, Benedikt; Hinkov, Borislav; MacFarland, Donald; Zederbauer, Tobias; Detz, Hermann; Andrews, Aaron Maxwell; Schrenk, Werner; Acedo, Pablo; Lendl, Bernhard; Strasser, Gottfried

    2018-01-01

    We review recent advances in chemical sensing applications based on surface emitting ring quantum cascade lasers (QCLs). Such lasers can be implemented in monolithically integrated on-chip laser/detector devices forming compact gas sensors, which are based on direct absorption spectroscopy according to the Beer-Lambert law. Furthermore, we present experimental results on radio frequency modulation up to 150 MHz of surface emitting ring QCLs. This technique provides detailed insight into the modulation characteristics of such lasers. The gained knowledge facilitates the utilization of ring QCLs in combination with spectroscopic techniques, such as heterodyne phase-sensitive dispersion spectroscopy for gas detection and analysis.

  15. EU Labour Law

    DEFF Research Database (Denmark)

    Nielsen, Ruth

    The focus in this book is upon EU labour law and its interaction with national and international labour law. The book provides an analysis of the framework and sources of European labour law. It covers a number of substantive topics, notably collective labour law, individual employment contracts......, discrimination on grounds of sex and on other grounds, free movement of persons, restructuring of enterprises, working environment and enforcement of rights derived from EU labour law....

  16. Property law in Jersey

    OpenAIRE

    MacLeod, Rebecca Frances

    2012-01-01

    Jersey law, and within it Jersey property law, has received little academic attention. This thesis seeks to examine, and provide a systematic account of, the Jersey law of property. Specific aspects of substantive law are explored. From these, general observations about the nature and structure of property law are made. Unsurprisingly, given the small size of the island, Jersey has a relatively limited amount of indigenous legal material to offer, much of it in French. Inevitab...

  17. EU Labour Law

    DEFF Research Database (Denmark)

    Nielsen, Ruth

    The focus in this book is upon EU labour law and its interaction with national and international labour law. The book provides an analysis of the framework and sources of European labour law. It covers a number of substantive topics, notably collective labour law, individual employment contracts,......, discrimination on grounds of sex and on other grounds, free movement of persons, restructuring of enterprises, working environment and enforcement of rights derived from EU labour law....

  18. Fractal harmonic law and waterproof/dustproof

    Directory of Open Access Journals (Sweden)

    Kong Hai-Yan

    2014-01-01

    Full Text Available The fractal harmonic law admits that the friction between the pure water and the moving surface is the minimum when fractal dimensions of water in Angstrom scale are equal to fractal dimensions of the moving surface in micro scale. In the paper, the fractal harmonic law is applied to demonstrate the mechanism of waterproof/ dustproof. The waterproof phenomenon of goose feathers and lotus leaves is illustrated to verify our results and experimental results agree well with our theoretical analysis.

  19. Reactimeter dispersion equation

    OpenAIRE

    A.G. Yuferov

    2016-01-01

    The aim of this work is to derive and analyze a reactimeter metrological model in the form of the dispersion equation which connects reactimeter input/output signal dispersions with superimposed random noise at the inlet. It is proposed to standardize the reactimeter equation form, presenting the main reactimeter computing unit by a convolution equation. Hence, the reactimeter metrological characteristics are completely determined by this unit hardware function which represents a transient re...

  20. A simple approach for the sonochemical loading of Au, Ag and Pd nanoparticle on functionalized MWCNT and subsequent dispersion studies for removal of organic dyes: Artificial neural network and response surface methodology studies.

    Science.gov (United States)

    Moghaddari, Mitra; Yousefi, Fakhri; Ghaedi, Mehrorang; Dashtian, Kheibar

    2018-04-01

    In this study, the artificial neural network (ANN) and response surface methodology (RSM) based on central composite design (CCD) were applied for modeling and optimization of the simultaneous ultrasound-assisted removal of quinoline yellow (QY) and eosin B (EB). The MWCNT-NH 2 and its composites were prepared by sonochemistry method and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectroscopy (EDS) analysis's. Initial dyes concentrations, adsorbent mass, sonication time and pH contribution on QY and EB removal percentage were investigated by CCD and replication of experiments at conditions suggested by model has results which statistically are close to experimented data. The ultrasound irradiation is associated with raising mass transfer of process so that small amount of the adsorbent (0.025 g) is able to remove high percentage (88.00% and 91.00%) of QY and EB, respectively in short time (6.0 min) at pH = 6. Analysis of experimental data by conventional models is good indication of Langmuir efficiency for fitting and explanation of experimented data. The ANN based on the Levenberg-Marquardt algorithm (LMA) combined of linear transfer function at output layer and tangent sigmoid transfer function at hidden layer with 20 hidden neurons supply best operation conditions for good prediction of adsorption data. Accurate and efficient artificial neural network was obtained by changing the number of neurons in the hidden layer, while data was divided into training, test and validation sets which contained 70, 15 and 15% of data points respectively. The Average absolute deviation (AAD)% of a collection of 128 data points for MWCNT-NH 2 and composites is 0.58%.for EB and 0.55 for YQ. Copyright © 2017 Elsevier B.V. All rights reserved.

  1. A novel nanoemulsion-based method to produce ultrasmall, water-dispersible nanoparticles from chitosan, surface modified with cell-penetrating peptide for oral delivery of proteins and peptides

    Directory of Open Access Journals (Sweden)

    Barbari GR

    2017-05-01

    Full Text Available Ghullam Reza Barbari,1 Farid Abedin Dorkoosh,1 Mohsen Amini,2 Mohammad Sharifzadeh,3 Fateme Atyabi,1 Saeed Balalaie,4 Niyousha Rafiee Tehrani,5 Morteza Rafiee Tehrani1 1Department of Pharmaceutics, 2Department of Medicinal Chemistry, 3Department of Pharmacology, School of Pharmacy, Tehran University of Medical Sciences, 4Department of Chemistry, Khaje Nasiroddin University, 5Department of Biochemistry, School of Medicine, Tehran University of Medical Sciences, Tehran, Iran Abstract: A simple and reproducible water-in-oil (W/O nanoemulsion technique for making ultrasmall (<15 nm, monodispersed and water-dispersible nanoparticles (NPs from chitosan (CS is reported. The nano-sized (50 nm water pools of the W/O nanoemulsion serve as “nano-containers and nano-reactors”. The entrapped polymer chains of CS inside these “nano-reactors” are covalently cross-linked with the chains of polyethylene glycol (PEG, leading to rigidification and formation of NPs. These NPs possess excessive swelling properties in aqueous medium and preserve integrity in all pH ranges due to chemical cross-linking with PEG. A potent and newly developed cell-penetrating peptide (CPP is further chemically conjugated to the surface of the NPs, leading to development of a novel peptide-conjugated derivative of CS with profound tight-junction opening properties. The CPP-conjugated NPs can easily be loaded with almost all kinds of proteins, peptides and nucleotides for oral delivery applications. Feasibility of this nanoparticulate system for oral delivery of a model peptide (insulin is investigated in Caco-2 cell line. The cell culture results for translocation of insulin across the cell monolayer are very promising (15%–19% increase, and animal studies are actively under progress and will be published separately. Keywords: ultrasmall, cell-penetrating peptide, chitosan, oral insulin, nanoemulsion, Caco-2 cell

  2. Determining Crust and Upper Mantle Structure by Bayesian Joint Inversion of Receiver Functions and Surface Wave Dispersion at a Single Station: Preparation for Data from the InSight Mission

    Science.gov (United States)

    Jia, M.; Panning, M. P.; Lekic, V.; Gao, C.

    2017-12-01

    The InSight (Interior Exploration using Seismic Investigations, Geodesy and Heat Transport) mission will deploy a geophysical station on Mars in 2018. Using seismology to explore the interior structure of the Mars is one of the main targets, and as part of the mission, we will use 3-component seismic data to constrain the crust and upper mantle structure including P and S wave velocities and densities underneath the station. We will apply a reversible jump Markov chain Monte Carlo algorithm in the transdimensional hierarchical Bayesian inversion framework, in which the number of parameters in the model space and the noise level of the observed data are also treated as unknowns in the inversion process. Bayesian based methods produce an ensemble of models which can be analyzed to quantify uncertainties and trade-offs of the model parameters. In order to get better resolution, we will simultaneously invert three different types of seismic data: receiver functions, surface wave dispersion (SWD), and ZH ratios. Because the InSight mission will only deliver a single seismic station to Mars, and both the source location and the interior structure will be unknown, we will jointly invert the ray parameter in our approach. In preparation for this work, we first verify our approach by using a set of synthetic data. We find that SWD can constrain the absolute value of velocities while receiver functions constrain the discontinuities. By joint inversion, the velocity structure in the crust and upper mantle is well recovered. Then, we apply our approach to real data from an earth-based seismic station BFO located in Black Forest Observatory in Germany, as already used in a demonstration study for single station location methods. From the comparison of the results, our hierarchical treatment shows its advantage over the conventional method in which the noise level of observed data is fixed as a prior.

  3. Temporal dispersion of Dyakonov modes induced by spatial dispersion in dielectric composites

    Science.gov (United States)

    Ushkov, Andrey A.; Shcherbakov, Alexey A.

    2017-09-01

    The article focuses on investigation of nonlocal effects in 3D periodic dielectric composites operating in the effective medium regime. Ab-initio simulations using the modified Plane-Wave method provide reliable quantitative description of spatial-dispersion effects, including unusual birefringence, dispersion of optical axes and noticeable isofrequency surface deformations. Additionally, such simulation allows one to derive numerical coefficients for the effective medium approximation and to estimate its accuracy. In our work we consider plane interfaces between isotropic media and dielectric composites, and demonstrate a theoretical possibility to excite surface Dyakonov waves with strong temporal dispersion, which appears to be induced by the mentioned spatial dispersion, and does not exist in case of natural anisotropic dielectrics.

  4. A guided wave dispersion compensation method based on compressed sensing

    Science.gov (United States)

    Xu, Cai-bin; Yang, Zhi-bo; Chen, Xue-feng; Tian, Shao-hua; Xie, Yong

    2018-03-01

    The ultrasonic guided wave has emerged as a promising tool for structural health monitoring (SHM) and nondestructive testing (NDT) due to their capability to propagate over long distances with minimal loss and sensitivity to both surface and subsurface defects. The dispersion effect degrades the temporal and spatial resolution of guided waves. A novel ultrasonic guided wave processing method for both single mode and multi-mode guided waves dispersion compensation is proposed in this work based on compressed sensing, in which a dispersion signal dictionary is built by utilizing the dispersion curves of the guided wave modes in order to sparsely decompose the recorded dispersive guided waves. Dispersion-compensated guided waves are obtained by utilizing a non-dispersion signal dictionary and the results of sparse decomposition. Numerical simulations and experiments are implemented to verify the effectiveness of the developed method for both single mode and multi-mode guided waves.

  5. Partitioning of fresh crude oil between floating, dispersed and sediment phases: Effect of exposure order to dispersant and granular materials.

    Science.gov (United States)

    Boglaienko, Daria; Tansel, Berrin

    2016-06-15

    When three or more high and low energy substrates are mixed, wetting order can significantly affect the behavior of the mixture. We analyzed the phase distribution of fresh floating Louisiana crude oil into dispersed, settled and floating phases depending on the exposure sequence to Corexit 9500A (dispersant) and granular materials. In the experiments artificial sea water at salinity 34‰ was used. Limestone (2.00-0.300 mm) and quartz sand (0.300-0.075 mm) were used as the natural granular materials. Dispersant Corexit 9500A increased the amount of dispersed oil up to 33.76 ± 7.04%. Addition of granular materials after the dispersant increased dispersion of oil to 47.96 ± 1.96%. When solid particles were applied on the floating oil before the dispersant, oil was captured as oil-particle aggregates and removed from the floating layer. However, dispersant addition led to partial release of the captured oil, removing it from the aggregated form to the dispersed and floating phases. There was no visible oil aggregation with the granular materials when quartz or limestone was at the bottom of the flask before the addition of oil and dispersant. The results show that granular materials can be effective when applied from the surface for aggregating or dispersing oil. However, the granular materials in the sediments are not effective neither for aggregating nor dispersing floating oil. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    schools; to amend and repeal certain laws relating to schools; and to provide for matters connected therewith). 3 Murphy J ... Pension Funds Adjudicator” (2004) 12 Juta's Business Law Journal 2; Jeram N “Jurisdiction of the Pension ...... respect of civil proceedings or a summons or a notice of motion against such member.

  7. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    LAW

    331. 2 World Water Assessment Programme (2009). See also Fitzmaurice (2007) 537. LAW. OCRACY. ELOPMENT. LAW. DEMOCRACY. & DEVELOPMENT. VOLUME 15 (2011) ...... Appellate Division held as follows: “[W]here in proceedings on notice of motion disputes of fact have arisen on the affidavits, a final order ...

  8. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    The institution, status and role of traditional leadership, according to customary law, are subject to the Constitution. (2). A traditional authority that observes a system of customary law may function subject to any applicable legislation and customs, which includes amendments to, or repeal of, that legislation or those customs.

  9. Analytical simulation of two dimensional advection dispersion ...

    African Journals Online (AJOL)

    The study was designed to investigate the analytical simulation of two dimensional advection dispersion equation of contaminant transport. The steady state flow condition of the contaminant transport where inorganic contaminants in aqueous waste solutions are disposed of at the land surface where it would migrate ...

  10. Analytical Simulation of Two Dimensional Advection Dispersion ...

    African Journals Online (AJOL)

    ADOWIE PERE

    ABSTRACT: The study was designed to investigate the analytical simulation of two dimensional advection dispersion equation of contaminant transport. The steady state flow condition of the contaminant transport where inorganic contaminants in aqueous waste solutions are disposed of at the land surface where it would ...

  11. Defocusing regimes of nonlinear waves in media with negative dispersion

    DEFF Research Database (Denmark)

    Bergé, L.; Kuznetsov, E.A.; Juul Rasmussen, J.

    1996-01-01

    Defocusing regimes of quasimonochromatic waves governed by a nonlinear Schrodinger equation with mixed-sign dispersion are investigated. For a power-law nonlinearity, we show that localized solutions to this equation defined at the so-called critical dimension cannot collapse in finite time...

  12. Plasma treatment of diamond nanoparticles for dispersion improvement in water

    International Nuclear Information System (INIS)

    Yu Qingsong; Kim, Young Jo; Ma, Hongbin

    2006-01-01

    Low-temperature plasmas of methane and oxygen mixtures were used to treat diamond nanoparticles to modify their surface characteristics and thus improve their dispersion capability in water. It was found that the plasma treatment significantly reduced water contact angle of diamond nanoparticles and thus rendered the nanoparticles with strong water affinity for dispersion enhancement in polar media such as water. Surface analysis using Fourier transform infrared spectroscopy confirmed that polar groups were imparted on nanoparticle surfaces. As a result, improved suspension stability was observed with plasma treated nanoparticles when dispersed in water

  13. Dispersion relations in heavily-doped nanostructures

    CERN Document Server

    Ghatak, Kamakhya Prasad

    2016-01-01

    This book presents the dispersion relation in heavily doped nano-structures. The materials considered are III-V, II-VI, IV-VI, GaP, Ge, Platinum Antimonide, stressed, GaSb, Te, II-V, HgTe/CdTe superlattices and Bismuth Telluride semiconductors. The dispersion relation is discussed under magnetic quantization and on the basis of carrier energy spectra. The influences of magnetic field, magneto inversion, and magneto nipi structures on nano-structures is analyzed. The band structure of optoelectronic materials changes with photo-excitation in a fundamental way according to newly formulated electron dispersion laws. They control the quantum effect in optoelectronic devices in the presence of light. The measurement of band gaps in optoelectronic materials in the presence of external photo-excitation is displayed. The influences of magnetic quantization, crossed electric and quantizing fields, intense electric fields on the on the dispersion relation in heavily doped semiconductors and super-lattices are also disc...

  14. Modified dispersion relations, inflation, and scale invariance

    Science.gov (United States)

    Bianco, Stefano; Friedhoff, Victor Nicolai; Wilson-Ewing, Edward

    2018-02-01

    For a certain type of modified dispersion relations, the vacuum quantum state for very short wavelength cosmological perturbations is scale-invariant and it has been suggested that this may be the source of the scale-invariance observed in the temperature anisotropies in the cosmic microwave background. We point out that for this scenario to be possible, it is necessary to redshift these short wavelength modes to cosmological scales in such a way that the scale-invariance is not lost. This requires nontrivial background dynamics before the onset of standard radiation-dominated cosmology; we demonstrate that one possible solution is inflation with a sufficiently large Hubble rate, for this slow roll is not necessary. In addition, we also show that if the slow-roll condition is added to inflation with a large Hubble rate, then for any power law modified dispersion relation quantum vacuum fluctuations become nearly scale-invariant when they exit the Hubble radius.

  15. Refuge versus dispersion in the logistic equation

    Science.gov (United States)

    Cintra, W.; Morales-Rodrigo, C.; Suárez, A.

    2017-06-01

    In this paper we consider a logistic equation with nonlinear diffusion arising in population dynamics. In this model, there exists a refuge where the species grows following a Malthusian law and, in addition, there exists also a non-linear diffusion representing a repulsive dispersion of the species. We prove existence and uniqueness of positive solution and study the behavior of this solution with respect to the parameter λ, the growth rate of the species. Mainly, we use bifurcation techniques, the sub-supersolution method and a construction of appropriate large solutions.

  16. Plasticity of oxide dispersion strengthened ferritic alloys

    International Nuclear Information System (INIS)

    Zakine, C.; Prioul, C.; Alamo, A.; Francois, D.

    1993-01-01

    Two 13%Cr oxide dispersion strengthened (ODS) ferritic alloys, DT and DY, exhibiting different oxide particle size distribution and a χ phase precipitation were studied. Their tensile properties have been tested from 20 to 700 C. Experimental observations during room temperature tensile tests performed in a scanning electronic microscope have shown that the main damage mechanism consists in microcracking of the χ phase precipitates on grain boundaries. These alloys are high tensile and creep resistant between 500 and 700 C. Their strongly stress-sensitive creep behaviour can be described by usual creep laws and incorporating a threshold stress below which the creep rate is negligible. (orig.)

  17. Recent Case Law

    DEFF Research Database (Denmark)

    Petz, Thomas; Sagaert, Vincent; Østergaard, Kim

    2004-01-01

    In this section authors from various European countries report the recent case law in their country on the field of private patrimonial law, that is decisions on the law of property, juridical acts, the law of obligations, contract law and prescription. The European Review of Private Law (ERPL......) started this section in 2003. The section aims to give our readers an overview of what is happening in the most recent European case law. We have asked the national reporters to report the juridical essence of the decisions given by the highest courts in their country. These national reports...... not relate the facts of the decision, nor the personal opinion of the reporter. One can find discussions on the most important decisions of European courts in ERPL’s case note section. The recent case law section gives overviews of decisions published in periods of four months. The period of January...

  18. By Law Established

    DEFF Research Database (Denmark)

    Christoffersen, Lisbet

    2017-01-01

    An analysis of the degree and content of statutory law regulation of Nordic Lutheran majority churches in 2017......An analysis of the degree and content of statutory law regulation of Nordic Lutheran majority churches in 2017...

  19. Themes in nuclear law

    International Nuclear Information System (INIS)

    2003-01-01

    The nuclear law was analyzed during a workshop. The main aspects were: the law of population to access to information on nuclear energy and the relationship between the Regulator Organism and the nuclear power plants managers

  20. Community Notification Laws

    National Research Council Canada - National Science Library

    Speck, Michael B

    2007-01-01

    .... Furthermore, a false sense of security and reductions in incest reporting continue to victimize children, which results in further sex offender laws passed by legislatures without empirical data supporting such laws...

  1. Health care law versus constitutional law.

    Science.gov (United States)

    Hall, Mark A

    2013-04-01

    National Federation of Independent Business v. Sebelius, the Supreme Court's ruling on the Patient Protection and Affordable Care Act, is a landmark decision - both for constitutional law and for health care law and policy. Others will study its implications for constitutional limits on a range of federal powers beyond health care. This article considers to what extent the decision is also about health care law, properly conceived. Under one view, health care law is the subdiscipline that inquires how courts and government actors take account of the special features of medicine that make legal or policy issues especially problematic - rather than regarding health care delivery and finance more generically, like most any other economic or social enterprise. Viewed this way, the opinions from the Court's conservative justices are mainly about general constitutional law principles. In contrast, Justice Ruth Bader Ginsburg's dissenting opinion for the four more liberal justices is just as much about health care law as it is about constitutional law. Her opinion gives detailed attention to the unique features of health care finance and delivery in order to inform her analysis of constitutional precedents and principles. Thus, the Court's multiple opinions give a vivid depiction of the compelling contrasts between communal versus individualistic conceptions of caring for those in need, and between health care and health insurance as ordinary commodities versus ones that merit special economic, social, and legal status.

  2. Dispersion effect and auto-reconditioning performance of nanometer ...

    Indian Academy of Sciences (India)

    This paper reported on dispersion effect and dispersing techniques of nanometer WS2 particles in the green lubricant concocted by us. And it also researched on auto-reconditioning performance of nanometer WS2 particles to the abrasive surfaces of steel ball from four-ball tribology test and piston ring from engine ...

  3. Chiral anomalous dispersion

    Science.gov (United States)

    Sadofyev, Andrey; Sen, Srimoyee

    2018-02-01

    The linearized Einstein equation describing graviton propagation through a chiral medium appears to be helicity dependent. We analyze features of the corresponding spectrum in a collision-less regime above a flat background. In the long wave-length limit, circularly polarized metric perturbations travel with a helicity dependent group velocity that can turn negative giving rise to a new type of an anomalous dispersion. We further show that this chiral anomalous dispersion is a general feature of polarized modes propagating through chiral plasmas extending our result to the electromagnetic sector.

  4. Russian Law and Globalization

    OpenAIRE

    David Fishman

    2016-01-01

    The Faculty of Law of the University of Helsinki is committed to diverse and internationally collaborative approaches to studying various legal systems in the context of comparative law, and UHLS and the Law Faculty of the National Research University, Higher School of Economics have developed an ongoing program to undertake this effort. The original annual conference series on the Development of Russian Law was launched in 2008 as an initiative to further knowledge and critical thinking abou...

  5. Liability in Employment Law

    OpenAIRE

    Lang, Roman

    2006-01-01

    97 Liability in labour law Summary This diploma paper analyzes liability in labour law with focus on liability for damage. At first the diploma paper introduces conception of liability in general and idea of liability in labour law considering different position of employee and employer in labour relations. The diploma paper then enumerates the types of labour-law liability. The next chapter concentrates on liability for damage. This chapter describes characteristic features of liability for ...

  6. On Kepler's First Law

    Indian Academy of Sciences (India)

    law of areas follows and Kepler's second law is explained. Note that all that the proof requires is that the force be a .... planation of Kepler's third law: if 2a is the major axis of the orbit (an ellipse, by the second law) and T the .... tors, but he describes it in geometrical language. Let po- sition vectors be measured with reference ...

  7. Environmental law in Denmark

    DEFF Research Database (Denmark)

    Basse, Ellen Margrethe

    Modern Danish environmental law has a strong international dimension due to membership of EU and participation in global and regional agreements. The concept of transnational law that includes EU environmental law that has vertical as well as horizontal effects across jurisdictions binding national...

  8. European tax law

    NARCIS (Netherlands)

    Terra, B.J.M.; Wattel, P.J.

    2008-01-01

    This book is intended as a reference book for tax law and EC law pratitioners, tax administrators, academics, the judiciary and tax or Community law policy makers. For students, an abridged student edition textbook is available. The book offers a systematic survey of the tax implications of the EC

  9. Fractional Fick's law: the direct way

    International Nuclear Information System (INIS)

    Neel, M C; Abdennadher, A; Joelson, M

    2007-01-01

    Levy flights, which are Markovian continuous time random walks possibly accounting for extreme events, serve frequently as small-scale models for the spreading of matter in heterogeneous media. Among them, Brownian motion is a particular case where Fick's law holds: for a cloud of walkers, the flux is proportional to the gradient of the probability density of finding a particle at some place. Levy flights resemble Brownian motion, except that jump lengths are distributed according to an α-stable Levy law, possibly showing heavy tails and skewness. For α between 1 and 2, a fractional form of Fick's law is known to hold in infinite media: that the flux is proportional to a combination of fractional derivatives or the order of α - 1 of the density of walkers was obtained as a consequence of a fractional dispersion equation. We present a direct and natural proof of this result, based upon a novel definition of usual fractional derivatives, involving a convolution and a limiting process. Taking account of the thus obtained fractional Fick's law yields fractional dispersion equation for smooth densities. The method adapts to domains, limited by boundaries possibly implying non-trivial modifications to this equation

  10. Water, law, science

    Science.gov (United States)

    Narasimhan, T. N.

    2008-01-01

    SummaryIn a world with water resources severely impacted by technology, science must actively contribute to water law. To this end, this paper is an earth scientist's attempt to comprehend essential elements of water law, and to examine their connections to science. Science and law share a common logical framework of starting with a priori prescribed tenets, and drawing consistent inferences. In science, observationally established physical laws constitute the tenets, while in law, they stem from social values. The foundations of modern water law in Europe and the New World were formulated nearly two thousand years ago by Roman jurists who were inspired by Greek philosophy of reason. Recognizing that vital natural elements such as water, air, and the sea were governed by immutable natural laws, they reasoned that these elements belonged to all humans, and therefore cannot be owned as private property. Legally, such public property was to be governed by jus gentium, the law of all people or the law of all nations. In contrast, jus civile or civil law governed private property. Remarkably, jus gentium continues to be relevant in our contemporary society in which science plays a pivotal role in exploiting vital resources common to all. This paper examines the historical roots of modern water law, follows their evolution through the centuries, and examines how the spirit of science inherent in jus gentium is profoundly influencing evolving water and environmental laws in Europe, the United States and elsewhere. In a technological world, scientific knowledge has to lie at the core of water law. Yet, science cannot formulate law. It is hoped that a philosophical understanding of the relationships between science and law will contribute to their constructively coming together in the service of society.

  11. Psychorheology of food dispersions

    Czech Academy of Sciences Publication Activity Database

    Štern, Petr; Panovská, Z.; Pokorný, J.

    2010-01-01

    Roč. 58, č. 1 (2010), s. 29-35 ISSN 0042-790X R&D Projects: GA AV ČR IAA2060404 Institutional research plan: CEZ:AV0Z20600510 Keywords : psychorheology * food dispersions * tomato ketchup * rheology * sensory analysis Subject RIV: BK - Fluid Dynamics Impact factor: 0.553, year: 2010

  12. Spatially Dispersed Employee Recovery

    DEFF Research Database (Denmark)

    Hvass, Kristian Anders; Torfadóttir, Embla

    2014-01-01

    personnel achieve service recovery. Employee recovery within service research often focuses on front-line employees that work in a fixed location, however a contribution to the field is made by investigating the recovery of spatially dispersed personnel, such as operational personnel in the transport sector...

  13. Interface, a dispersed architecture

    NARCIS (Netherlands)

    Vissers, C.A.

    1976-01-01

    Past and current specification techniques use timing diagrams and written text to describe the phenomenology of an interface. This paper treats an interface as the architecture of a number of processes, which are dispersed over the related system parts and the message path. This approach yields a

  14. Coping with power dispersion?

    DEFF Research Database (Denmark)

    2014-01-01

    how the actors involved cope with the new configurations. In this introduction, we discuss the conceptualization of power dispersion and highlight the ways in which the contributions add to this research agenda. We then outline some general conclusions and end by indicating future avenues of research...

  15. A dispersion control chart

    NARCIS (Netherlands)

    Riaz, M.

    2008-01-01

    The study proposes a Shewhart-type control chart, namely Q chart, based on inter-quartile range, for monitoring changes (especially of moderate and large amounts which is major concern of Shewhart-type control charts) in process dispersion assuming normality of quality characteristic to be

  16. Turbulence and Dispersion

    Indian Academy of Sciences (India)

    phenomenon and this is the topic of the present article. Dispersion. Watch smoke flowing out of a chimney2. On a quiet day, it is seen that after rising for a small distance, the smoke stream bends and flows along with the wind. This is to be expected since the smoke particles are carried, or in technical terminology, convected ...

  17. Human law and computer law comparative perspectives

    CERN Document Server

    Hildebrandt, Mireille

    2014-01-01

    This book probes the epistemological and hermeneutic implications of data science and artificial intelligence for democracy and the Rule of Law, and the challenges posed by computing technologies traditional legal thinking and the regulation of human affairs.

  18. A common law agenda for labour law

    OpenAIRE

    Hough, Barry; Spowart-Taylor, Ann

    1999-01-01

    This article assesses the purposes of a re-contractualisation of the employment relationship. It examines in particular the implied duty to act in good faith, and argues that in developing this and other implied terms the judiciary only extends employment protection to further wealth maximisation. It is argued that the common law sees its contribution to labour law as a device for maximising the efficiency of the enterprise and promoting the creation of wealth for the benefit of the national ...

  19. Petroleum-collecting and dispersing chemicals for cleaning sea ...

    African Journals Online (AJOL)

    Petroleum-collecting and dispersing chemicals for cleaning sea surface from thin petroleum slicks. Z. H. Asadov, I. A. Zarbaliyeva, R. A. Rahimov, N. V. Salamova, S. K. Eyyubova, G. A. Ahmadova, A. Z. Asadova ...

  20. Some of Indonesian Cyber Law Problems

    Science.gov (United States)

    Machmuddin, D. D.; Pratama, B.

    2017-01-01

    Cyber regulation is very important to control human interaction within the Internet network in cyber space. On the surface, innovation development in science and technology facilitates human activity. But on the inside, innovation was controlled by new business model. In cyber business activities mingle with individual protection. By this condition, the law should keep the balance of the activities. Cyber law problems, were not particular country concern, but its global concern. This is a good opportunity for developing country to catch up with developed country. Beside this opportunity for talented people in law and technology is become necessity. This paper tries to describe cyber law in Indonesia. As a product of a developing country there are some of weakness that can be explained. Terminology and territory of cyber space is become interesting to discuss, because this two problems can give a broad view on cyber law in Indonesia.

  1. Do oil dispersants make spilled oil more toxic to fish?

    International Nuclear Information System (INIS)

    Hodson, P.

    2010-01-01

    The Deepwater Horizon blowout in the Gulf of Mexico was the world's largest oil spill in terms of duration and volume spilled. Clean-up operations, which involved the continuous and wide-spread use of oil dispersant at the surface and at the seabed discharge point at 1500 metres depth, gave rise to public concern about dispersant toxicity. Reports from the United States Environmental Protection Agency (EPA) claimed little difference in acute toxicity to marine fish and invertebrate species among commonly available dispersants and between dispersed and non-dispersed Louisiana Sweet Crude. Technically, the toxicity of waterborne hydrocarbons does not vary with chemical dispersion. However, the EPA omitted any consideration of loading, and misled the public about the risks of dispersant use in oil clean-up. This study examined the chronic toxicity of dispersed oil to fish embryos. The study revealed that toxicity expressed as oil loading increases by a factor of 10 to 1000 times with dispersion, largely because 10 to 1000 times more oil enters the water column. Since the action of dispersant is on the exposure component of the risk equation, not on the potency of the toxic components of oil, then the risk of oil toxicity to fish increases an equivalent amount.

  2. Chemical countermeasures: Dispersants overview of dispersant use (including application) and research issues

    International Nuclear Information System (INIS)

    Butler, J.N.

    1992-01-01

    I will attempt in twenty minutes to summarize the state of research on oil spill dispersants as I perceive it. The expertise I bring to this task includes 20 years of experience with the fate and effects of petroleum in the marine environment, including participation in the 1973 and 1981 NRC studies and three years as chairman of the NRC committee on oil spill dispersants. I More recently I served on a committee of the International Maritime Organization which reviewed the open-quotes Impact of oil and related chemicals and wastes on the marine environment.close quotes That report will be published this year. However, my statements in this paper are not made as a representative of either NRC or IMO. They are my own interpretation of scientific literature cited in the above reviews. Dispersants are chemical formulations, which include surface active agents, designed to decrease the interfacial tension between oil and water. Because the first attempts to disperse oil on a large scale, at the Torrey Canyon spill of 1967, used highly toxic degreasing agents, dispersants have an undeserved reputation for toxicity. In fact, for twenty years dispersant formulations have been developed with an emphasis on reducing their toxicity to marine life. The dispersal of oil in water has been documented in the laboratory by dozens of papers (see references in NRC 1989, pp 70-79), and in the field by dozens of studies (NRC 1989, pp 165- 193). The toxicity of commercial dispersant formulations (NRC 1989, pp 81-123) and dispersed oil (NRC 1989, pp 123-147) has been tested on a wide variety of marine organisms ranging from algae to salmonid fishes. The NRC review has been updated by the IMO/GESAMP (1992) study, but the conclusions remain unchanged

  3. Waves, conservation laws and symmetries of a third-order nonlinear ...

    African Journals Online (AJOL)

    order is under consideration. Important properties concerning advanced character such like conservation laws and the equation of continuity are given. Characteristic wave properties such like dispersion relations and both the group and phase ...

  4. Water, law, science

    Energy Technology Data Exchange (ETDEWEB)

    Narasimhan, T.N.

    2007-10-17

    In a world with water resources severely impacted bytechnology, science must actively contribute to water law. To this end,this paper is an earth scientist s attempt to comprehend essentialelements of water law, and to examine their connections to science.Science and law share a common logical framework of starting with apriori prescribed tenets, and drawing consistent inferences. In science,observationally established physical laws constitute the tenets, while inlaw, they stem from social values. The foundations of modern water law inEurope and the New World were formulated nearly two thousand years ago byRoman jurists who were inspired by Greek philosophy of reason.Recognizing that vital natural elements such as water, air, and the seawere governed by immutable natural laws, they reasoned that theseelements belonged to all humans, and therefore cannot be owned as privateproperty. Legally, such public property was to be governed by jusgentium, the law of all people or the law of all nations. In contrast,jus civile or civil law governed private property. Remarkably, jusgentium continues to be relevant in our contemporary society in whichscience plays a pivotal role in exploiting vital resources common to all.This paper examines the historical roots of modern water law, followstheir evolution through the centuries, and examines how the spirit ofscience inherent in jus gentium is profoundly influencing evolving waterand environmental laws in Europe, the United States and elsewhere. In atechnological world, scientific knowledge has to lie at the core of waterlaw. Yet, science cannot formulate law. It is hoped that a philosophicalunderstanding of the relationships between science and law willcontribute to their constructively coming together in the service ofsociety.

  5. Study on evaluation methods for Rayleigh wave dispersion characteristic

    Science.gov (United States)

    Shi, L.; Tao, X.; Kayen, R.; Shi, H.; Yan, S.

    2005-01-01

    The evaluation of Rayleigh wave dispersion characteristic is the key step for detecting S-wave velocity structure. By comparing the dispersion curves directly with the spectra analysis of surface waves (SASW) method, rather than comparing the S-wave velocity structure, the validity and precision of microtremor-array method (MAM) can be evaluated more objectively. The results from the China - US joint surface wave investigation in 26 sites in Tangshan, China, show that the MAM has the same precision with SASW method in 83% of the 26 sites. The MAM is valid for Rayleigh wave dispersion characteristic testing and has great application potentiality for site S-wave velocity structure detection.

  6. Wave equation dispersion inversion using a difference approximation to the dispersion-curve misfit gradient

    KAUST Repository

    Zhang, Zhendong

    2016-07-26

    We present a surface-wave inversion method that inverts for the S-wave velocity from the Rayleigh wave dispersion curve using a difference approximation to the gradient of the misfit function. We call this wave equation inversion of skeletonized surface waves because the skeletonized dispersion curve for the fundamental-mode Rayleigh wave is inverted using finite-difference solutions to the multi-dimensional elastic wave equation. The best match between the predicted and observed dispersion curves provides the optimal S-wave velocity model. Our method can invert for lateral velocity variations and also can mitigate the local minimum problem in full waveform inversion with a reasonable computation cost for simple models. Results with synthetic and field data illustrate the benefits and limitations of this method. © 2016 Elsevier B.V.

  7. Dispersed flow film boiling

    International Nuclear Information System (INIS)

    Andreani, M.; Yadigaroglu, G.

    1989-12-01

    Dispersed flow film boiling is the heat transfer regime that occurs at high void fractions in a heated channel. The way this transfer mode is modelled in the NRC computer codes (RELAP5 and TRAC) and the validity of the assumption and empirical correlations used is discussed. An extensive review of the theoretical and experimental work related with heat transfer to highly dispersed mixtures reveals the basic deficiencies of these models: the investigation refers mostly to the typical conditions of low rate bottom reflooding, since the simulation of this physical situation by the computer codes has often showed poor results. The alternative models that are available in the literature are reviewed, and their merits and limits are highlighted. The modification that could improve the physics of the models implemented in the codes are identified. (author) 13 figs., 123 refs

  8. Working document dispersion models

    International Nuclear Information System (INIS)

    Dop, H. van

    1988-01-01

    This report is a summary of the most important results from June 1985 of the collaboration of the RIVM (Dutch National Institute for Public Health and Environment Hygiene) and KNMI (Royal Dutch Meteorologic Institute) on the domain of dispersion models. It contains a short description of the actual SO x /NO x -model. Furthermore it contains recommendations for modifications of some numerical-mathematical aspects and an impulse to a more complete description of chemical processes in the atmosphere and the (wet) deposition process. A separate chapter is devoted to the preparation of meteorologic data which are relevant for dispersion as well as atmospheric chemistry and deposition. This report serves as working document for the final formulation of a acidifying- and oxidant-model. (H.W.). 69 refs.; 51 figs.; 13 tabs.; 3 schemes

  9. International Treaties Tax Law in Brazilian Law

    Directory of Open Access Journals (Sweden)

    Milena Zampieri Sellmann

    2016-06-01

    Full Text Available International agreements are the primary source of obligations internationally, whi- ch generate reflections in national law. They have been extremely used in tax harvest because they avoid double taxation and reduce tax burden in international trade. They are formal sources of tax law, which the legislature is expressly recognized in Article 96 of the National Tax Code to set the “tax legislation” expression. Article 98 of the Code determines the supremacy of international tax agreements over national law. Against the odds, international tax agreements do not revoke or modify the national legislation, just limit the effectiveness of national law incompatible with them, with supra-legal hierarchy and infra-constitution. They are above national law, either after or before it is created, and are below the Federal Constitution, so agreements incompatible with it should not be approved by Congress and, if so, they will be subject to declaration of unconstitutionality by the Supreme Court. It is a reporting case the international agreement’s unconstitutio- nality after it is celebrated.

  10. Phonon dispersion in Be

    International Nuclear Information System (INIS)

    Sharma, R.P.; Sharma, A.K.; Sharma, S.; Sinha, H.P.

    1979-01-01

    In a study of the lattice dynamics of Be a simple scheme has been developed in which the pairwise and long range forces are accounted on the lines of nonlocal theory and the short range three-body forces are included. This procedure of calculations has been applied to compute the phonon dispersion in Be and the results of investigation have been compared with the experimental data. (author)

  11. Dentistry and criminal law.

    Science.gov (United States)

    Khoury, B S; Khoury, J N

    2017-09-01

    Criminal law in dentistry, as shaped and moulded by the prevailing views of society, defines what is or is not socially acceptable. It applies in both personal and professional contexts with the intended consequence of protecting the public from unacceptable conduct and potential imbalances of power. At its centre, a patient's consent plays a pivotal role in transforming unlawful conduct into lawful conduct. This literature review considers the current law and the trend of utilizing criminal law in addition to non-criminal law alternatives of reprimanding clinicians for failure to achieve consent in the course of dental practice. Dentists must appreciate this change and the prosecuting authority's increasing willingness to resort to criminal law. © 2017 Australian Dental Association.

  12. UNCLOS and International Law

    DEFF Research Database (Denmark)

    Martinez Romera, Beatriz; Coelho, Nelson F.

    2018-01-01

    here is that of unilateral state practice and that practice has been relying, at least to some extent, on general public international law. This chapter explains how it is important to revisit international law to better understand the relative relevance of the UNCLOS in oceans governance today. Indeed......, treaty law is only one of many sources of the law that governs international relations, the others being customary international law and principles of law. The main conclusion of this chapter is that states may have to wake up to the limitations of the UNCLOS and that this will require understanding......The UNCLOS has been since its signature in 1982 the fundamental international legal reference for oceans governance. Indeed, this treaty was written “in pursuit of our common dream of writing a constitution for the oceans”. Yet much alike any dream, reality sooner or later catches up. The reality...

  13. The rule of law

    Directory of Open Access Journals (Sweden)

    Besnik Murati

    2015-07-01

    Full Text Available The state as an international entity and its impact on the individual’s right has been and still continues to be a crucial factor in the relationship between private and public persons. States vary in terms of their political system, however, democratic states are based on the separation of powers and human rights within the state. Rule of law is the product of many actors in a state, including laws, individuals, society, political system, separation of powers, human rights, the establishment of civil society, the relationship between law and the individual, as well as, individual-state relations. Purpose and focus of this study is the importance of a functioning state based on law, characteristics of the rule of law, separation of powers and the basic concepts of the rule of law.

  14. Pollen dispersal in sugar beet production fields.

    Science.gov (United States)

    Darmency, Henri; Klein, Etienne K; De Garanbé, Thierry Gestat; Gouyon, Pierre-Henri; Richard-Molard, Marc; Muchembled, Claude

    2009-04-01

    Pollen-mediated gene flow has important implications for biodiversity conservation and for breeders and farmers' activities. In sugar beet production fields, a few sugar beet bolters can produce pollen as well as be fertilized by wild and weed beet. Since the crop, the wild beets, and the weed beets are the same species and intercross freely, the question of pollen flow is an important issue to determine the potential dispersal of transgenes from field to field and to wild habitats. We report here an experiment to describe pollen dispersal from a small herbicide-resistant sugar beet source towards male sterile target plants located along radiating lines up to 1,200 m away. Individual dispersal functions were inferred from statistical analyses and compared. Pollen limitation, as expected in root-production fields, was confirmed at all the distances from the pollen source. The number of resistant seeds produced by bait plants best fitted a fat-tailed probability distribution curve of pollen grains (power-law) dependent on the distance from the pollen source. A literature survey confirmed that power-law function could fit in most cases. The b coefficient was lower than 2. The number of fertilized flowers by background (herbicide-susceptible) pollen grains was uniform across the whole field. Airborne pollen had a fertilization impact equivalent to that of one adjacent bolter. The individual dispersal function from different pollen sources can be integrated to provide the pollen cloud composition for a given target plant, thus allowing modeling of gene flow in a field, inter-fields in a small region, and also in seed-production area. Long-distance pollen flow is not negligible and could play an important role in rapid transgene dispersal from crop to wild and weed beets in the landscape. The removing of any bolting, herbicide-resistant sugar beet should be compulsory to prevent the occurrence of herbicide-resistant weed beet, thus preventing gene flow to wild

  15. Zipf's law, power laws and maximum entropy

    International Nuclear Information System (INIS)

    Visser, Matt

    2013-01-01

    Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified. (paper)

  16. Zipf's law, power laws and maximum entropy

    Science.gov (United States)

    Visser, Matt

    2013-04-01

    Zipf's law, and power laws in general, have attracted and continue to attract considerable attention in a wide variety of disciplines—from astronomy to demographics to software structure to economics to linguistics to zoology, and even warfare. A recent model of random group formation (RGF) attempts a general explanation of such phenomena based on Jaynes' notion of maximum entropy applied to a particular choice of cost function. In the present paper I argue that the specific cost function used in the RGF model is in fact unnecessarily complicated, and that power laws can be obtained in a much simpler way by applying maximum entropy ideas directly to the Shannon entropy subject only to a single constraint: that the average of the logarithm of the observable quantity is specified.

  17. Relative dispersion of clustered drifters in a small micro-tidal estuary

    Science.gov (United States)

    Suara, Kabir; Chanson, Hubert; Borgas, Michael; Brown, Richard J.

    2017-07-01

    Small tide-dominated estuaries are affected by large scale flow structures which combine with the underlying bed generated smaller scale turbulence to significantly increase the magnitude of horizontal diffusivity. Field estimates of horizontal diffusivity and its associated scales are however rare due to limitations in instrumentation. Data from multiple deployments of low and high resolution clusters of GPS-drifters are used to examine the dynamics of a surface flow in a small micro-tidal estuary through relative dispersion analyses. During the field study, cluster diffusivity, which combines both large- and small-scale processes ranged between, 0.01 and 3.01 m2/s for spreading clusters and, -0.06 and -4.2 m2/s for contracting clusters. Pair-particle dispersion, Dp2, was scale dependent and grew as Dp2 ∼ t1.83 in streamwise and Dp2 ∼ t0.8 in cross-stream directions. At small separation scale, pair-particle (d law and became weaker as separation scale increases. Pair-particle diffusivity was described as Kp ∼ d1.01 and Kp ∼ d0.85 in the streamwise and cross-stream directions, respectively for separation scales ranging from 0.1 to 10 m. Two methods were used to identify the mechanism responsible for dispersion within the channel. The results clearly revealed the importance of strain fields (stretching and shearing) in the spreading of particles within a small micro-tidal channel. The work provided input for modelling dispersion of passive particle in shallow micro-tidal estuaries where these were not previously experimentally studied.

  18. Prison Food Law

    OpenAIRE

    Naim, Cyrus

    2005-01-01

    This paper examines the history and current framework of prison food law. Whereas food law generally is the result of a complex maze of national, state, and local statutory and regulatory law, prison food is primarily regulated by the courts through adjudication of the Eighth Amendment prohibition of cruel and unusual punishment. This discrepancy is explained by the very different political realities faced by prison reform. At the same time, the result is both ineffective and counterproductiv...

  19. Rhetoric in Law

    DEFF Research Database (Denmark)

    Gabrielsen, Jonas

    The bond between law and rhetoric is as old as the subjects themselves. Especially the ancient works on legal rhetoric afford, however, a too narrow depiction of the interaction between law and rhetoric as a purely instrumental discipline of communication in court. In this paper I challenge...... this narrow understanding of legal rhetoric and outline three distinct frames of understanding the relation between law and rhetoric...

  20. ETHICS LAW DIALOGUE CULTURALIST

    OpenAIRE

    Oliveira Sobrinho, Afonso Soares

    2016-01-01

    The law is not the product of a univocal thought, but constructed from ethical relations, legal and political, cultural and institutional structuring-structured in the global society of the twenty-first century. The formation of the culturalist dialogical ethics law aims to encompass the diversity and pluralism of bodies and social actors through deliberative, participatory democracy in the creation, interpretation and application of law. Especially regarding the effectiveness of fundamental ...

  1. Outlines of environmental Law

    International Nuclear Information System (INIS)

    Salzwedel, J.

    1982-01-01

    In this omnibus, ten members of the working group for environmental law attempt to present the respective fields of environmental law in a consistent context, and to show the autonomy of each subject-matter as well as their interdependence and interrelationships. In the long run, the complexity of basic facts of natural science, technology and that of practical execution will require subject-specific penetration and application. Relationships between systems have to be realized to an increasing extent. Structures of law and administration have to be harmonized, and statements on the environmental impact of projects have to be made possible on the whole. Fundamental issues of environmental law are dealt with in the chapters entitled 'Concept and levels of applications of environmental law' and 'Environmental law in general'. The international, supranational and constitutional conditions given in advance of any environmental legislation increasingly gaining in importance are presented in the chapter on 'International environmental law', 'Basics of European Law' and on 'Constitutional Fundamentals'. The necessity of interdisciplinary cooperation becomes evident in those contributions concerning individual fields of environmental law. (orig./HSCH) [de

  2. CONSTANT ASPECTS OF LAW

    Directory of Open Access Journals (Sweden)

    ELENA ANGHEL

    2011-04-01

    Full Text Available "Are we watching, in the succession of history, the appearance and disappearance of legal systems or assisting, in a greater or lesser extent, to what might be considered, in a sense, an evolution of those systems?"1 Law, indissolubly linked to the general evolution of society, has recorded a number of differences in time and space, both in terms of content of various types and positive law systems, and also in terms of forms that take the rules of law, authorities who have the ability to edict it or the procedure to be followed.Indeed, there is no law for all times and all places, as law is not an abstract product of our reason, it comes from the human experience, it is a product of history and that is why institutions of each society can only be different from one society to another.2 But, as in reality there are not quantities of history - many, little or very little - but just history3, we can say that in typology there is not socialist law absolutely different from bourgeois, feudal or slave law, so there is just law. By this approach, I wanted to bring back into question the existence of some factors of constancy in law, those "legal permanencies” investigated by Edmond Picard, believing that "there is something in the legal relationship that necessarily subsist anywhere”.4

  3. What Causes Animals to Disperse?

    Indian Academy of Sciences (India)

    Also, Zubiri [3] study in 1995 on Ethiopian wolves showed that in cases where dispersal became far more risky, because of harsh environment and high wolf pack densities, the females (who are the predominant dispersers) often did not disperse, and eventu- ally some became the dominant females of the pack. This would.

  4. Dispersion of extensional waves in fluid-saturated porous cylinders at ultrasonic frequencies

    International Nuclear Information System (INIS)

    Berryman, J.G.

    1983-01-01

    Ultrasonic dispersion of extensional waves in fluid-saturated porous cylinders is studied by analyzing generalized Pochhammer equations derived using Biot's theory. Cases with open-pore surface and closed-pore surface boundary conditions are considered. For both cases, the dispersion of the fast extensional wave does not differ much qualitatively from the dispersion expected for extensional waves in isotropic elastic cylinders. A slow extensional wave propagates in the case with a closed-pore surface but not in the case with an open-pore surface. The propagating slow wave has very weak dispersion and its speed is always lower than, but close to, the bulk slow wave speed

  5. NOISY DISPERSION CURVE PICKING (NDCP): a Matlab friendly suite package for fully control dispersion curve picking

    Science.gov (United States)

    Granados, I.; Calo, M.; Ramos, V.

    2017-12-01

    We developed a Matlab suite package (NDCP, Noisy Dispersion Curve Picking) that allows a full control over parameters to identify correctly group velocity dispersion curves in two types of datasets: correlograms between two stations or surface wave records from earthquakes. Using the frequency-time analysis (FTAN), the procedure to obtain the dispersion curves from records with a high noise level becomes difficult, and sometimes, the picked curve result in a misinterpreted character. For correlogram functions, obtained with cross-correlation of noise records or earthquake's coda, a non-homogeneous noise sources distribution yield to a non-symmetric Green's function (GF); to retrieve the complete information contained in there, NDCP allows to pick the dispersion curve in the time domain both in the causal and non-causal part of the GF. Then the picked dispersion curve is displayed on the FTAN diagram to in order to check if it matches with the maximum of the signal energy avoiding confusion with overtones or spike of noise. To illustrate how NDCP performs, we show exemple using: i) local correlograms functions obtained from sensors deployed into a volcanic caldera (Los Humeros, in Puebla, Mexico), ii) regional correlograms functions between two stations of the National Seismological Service (SSN, Servicio Sismológico Nacional in Spanish), and iii) surface wave seismic record for an earthquake located in the Pacific Ocean coast of Mexico and recorded by the SSN. This work is supported by the GEMEX project (Geothermal Europe-Mexico consortium).

  6. Boundary control of long waves in nonlinear dispersive systems

    DEFF Research Database (Denmark)

    Hasan, Agus; Foss, Bjarne; Aamo, Ole Morten

    2011-01-01

    orders of the nonlinearity, the equation may have unstable solitary wave solutions. Although it is a one dimensional problem, achieving a global result for this equation is not trivial due to the nonlinearity and the mixed partial derivative. In this paper, two sets of nonlinear boundary control laws......Unidirectional propagation of long waves in nonlinear dispersive systems may be modeled by the Benjamin-Bona-Mahony-Burgers equation, a third order partial differential equation incorporating linear dissipative and dispersive terms, as well as a term covering nonlinear wave phenomena. For higher...... that achieve global exponential stability and semi-global exponential stability are derived for both linear and nonlinear cases....

  7. Economics of mining law

    Science.gov (United States)

    Long, K.R.

    1995-01-01

    Modern mining law, by facilitating socially and environmentally acceptable exploration, development, and production of mineral materials, helps secure the benefits of mineral production while minimizing environmental harm and accounting for increasing land-use competition. Mining investments are sunk costs, irreversibly tied to a particular mineral site, and require many years to recoup. Providing security of tenure is the most critical element of a practical mining law. Governments owning mineral rights have a conflict of interest between their roles as a profit-maximizing landowner and as a guardian of public welfare. As a monopoly supplier, governments have considerable power to manipulate mineral-rights markets. To avoid monopoly rent-seeking by governments, a competitive market for government-owned mineral rights must be created by artifice. What mining firms will pay for mineral rights depends on expected exploration success and extraction costs. Landowners and mining firms will negotlate respective shares of anticipated differential rents, usually allowing for some form of risk sharing. Private landowners do not normally account for external benefits or costs of minerals use. Government ownership of mineral rights allows for direct accounting of social prices for mineral-bearing lands and external costs. An equitable and efficient method is to charge an appropriate reservation price for surface land use, net of the value of land after reclamation, and to recover all or part of differential rents through a flat income or resource-rent tax. The traditional royalty on gross value of production, essentially a regressive income tax, cannot recover as much rent as a flat income tax, causes arbitrary mineral-reserve sterilization, and creates a bias toward development on the extensive margin where marginal environmental costs are higher. Mitigating environmental costs and resolving land-use conflicts require local evaluation and planning. National oversight ensures

  8. ACOUSTIC ENERGY AT CHANGE OF TREATED COMPOSITE MATERIAL DISPERSION PROPERTIES

    Directory of Open Access Journals (Sweden)

    Sergii Filonenko

    2016-12-01

    Full Text Available Purpose: The aim of this study is to investigate the influence of treated composite material dispersion properties on acoustic radiation energy, which appears during composite material machining. Methods: The researches were grounded on simulation of acoustic radiation energy at change of mechanically treated composite material properties dispersion for the mechanical model of its surface layer destruction. The data processing with definition of acoustic radiation statistical energy parameters was conducted. The analysis of acoustic emission energy parameters sensitivity to change of composite material properties dispersion, and as the analysis of influencing of composite material properties dispersion on AE amplitude and energy parameters was conducted. Results: Were obtained that at decreasing of composite material properties dispersion there is increasing an average level of acoustic radiation energy and value of its deviation. Is determined, that at decreasing of composite material properties dispersion the greatest increasing there is an acoustic emission energy average level dispersion. It is show that the increasing of acoustic radiation energy parameters advances increasing its amplitude parameters. Discussion: The simulation of acoustic radiation energy at composite material machining for the mechanical model surface layer destruction at decreasing of composite material properties dispersion (spread is conducted. It is shown, that the decreasing of composite material properties dispersion does not influence on acoustic radiation energy nature change. At the same time, the ascending parameter, that describing of composite material properties dispersion decreasing, results in increase of acoustic radiation signal energy parameters. The obtained outcomes can be used at mining methods of verification, diagnostic and monitoring of composite material machining technological processes. Thus during the composite material machining is possible

  9. Tracer dispersion - experiment and CFD

    International Nuclear Information System (INIS)

    Zitny, R.

    2004-01-01

    Description of tracer distribution by means of dispersion models is a method successfully used in process engineering for fifty years. Application of dispersion models in reactor engineering for characterization of flows in column apparatus, heat exchangers, etc. is summarized and experimental tracer techniques as well as CFD methods for dispersion coefficients evaluation are discussed. Possible extensions of thermal axial dispersion model (ADM) and a core-wall ADM model suitable for description of tracer dispersion in laminar flows are suggested as well as CFD implementation as 1D finite elements. (author)

  10. Developing a dispersant spraying capability

    Energy Technology Data Exchange (ETDEWEB)

    Gill, S.D.

    1979-01-01

    In developing a national dispersant spraying capability, the Canadian Coast Guard (CCG) has undertaken a modification program to enable the conventional offshore spraying gear to be mounted on almost any vessel of convenience. Smaller, more versatile inshore spraying vessels and pumps have been designed and built. With the popularization of concentrated dispersants, the inshore pumping equipment can be used aboard hovercraft for special application situations. A program of acquiring mobile dispersant storage tanks has been undertaken with auxiliary equipment that will facilitate the shipment of dispersants in bulk by air freight. Work also has commenced on extending the dispersant application program to include the CCG fleet of helicopters.

  11. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    25 Fentiman L “Pursuing the perfect mother: Why America's criminalization of maternal substance abuse is not the answer ... criminalisation efforts, working in tandem with other laws, such as the DDTA. The. Minister of .... either being engaged in criminal activity or due to living in poverty, and those living far away from the ...

  12. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    health care services, the interaction of geographic factors with other determinants of access (notably ... 3 Malan (2008) at 63; Malan N "The performance of the right to have access to social security" (2009) 13. Law ..... as by a relative paucity of road links and public transport networks.27 This contributed directly to the ...

  13. LAW DEMOCRACY & DEVELOPMENT LAW OCRACY ELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    Since 1994 the democratic government has implemented a whole range of laws and policies to ensure that public funding is aimed at redressing this disparity and that, ultimately, learners' right to basic education is realised.7 The financing of public schools is reliant on school fees to a great extent.8 Because the exact ...

  14. LAW OCRACY ELOPMENT LAW DEMOCRACY & DEVELOPMENT

    African Journals Online (AJOL)

    HP27975994114

    Geography, marginalisation and the performance of the right to have access to health care services in. Johannesburg. MARIUS PIETERSE*. Professor of Law, University of the. Witwatersrand ...... 46 While official Department of Health policy is that lack of documentation should not be a barrier to access to health services in ...

  15. Surface Tomonaga-Luttinger-Liquid State on Bi/InSb(001).

    Science.gov (United States)

    Ohtsubo, Yoshiyuki; Kishi, Jun-Ichiro; Hagiwara, Kenta; Le Fèvre, Patrick; Bertran, François; Taleb-Ibrahimi, Amina; Yamane, Hiroyuki; Ideta, Shin-Ichiro; Matsunami, Masaharu; Tanaka, Kiyohisa; Kimura, Shin-Ichi

    2015-12-18

    A 1D metallic surface state was created on an anisotropic InSb(001) surface covered with Bi. Angle-resolved photoelectron spectroscopy (ARPES) showed a 1D Fermi contour with almost no 2D distortion. Close to the Fermi level (E_{F}), the angle-integrated photoelectron spectra showed power-law scaling with the binding energy and temperature. The ARPES plot above E_{F}, obtained thanks to a thermally broadened Fermi edge at room temperature, showed a 1D state with continuous metallic dispersion across E_{F} and power-law intensity suppression around E_{F}. These results strongly suggest a Tomonaga-Luttinger liquid on the Bi/InSb(001) surface.

  16. A critical review on the scaling theory of dispersion

    Science.gov (United States)

    Zech, Alraune; Mai, Juliane; Attinger, Sabine; Dietrich, Peter; Teutsch, Georg; Fiori, Aldo; Rubin, Yoram

    2014-05-01

    The phenomenon of dispersive mixing of solutes in aquifers is subject of research since decades. The characterization of dispersivity at a particular field site is a prerequisite to predict the movement and spreading of a contaminant plume. Experimental investigations have shown, that field-scale dispersivities vary over orders of magnitude, which apparently depends on the scale of measurement. Gelhar et al. [1992] and Schulze-Makuch [2005] have reviewed a large number of transport experiments reported in the literature. Based on that data Schulze-Makuch [2005] performed a trend analysis of longitudinal dispersivity, fostering the empirical relationship of a power law between dispersivities and the scale of measurement without an upper bound. The goal of our study is to critically revisit not only the data used for the trend analysis but the power-law scale dependence of longitudinal dispersivity (e.g. Neuman [1990], Xu and Eckstein [1995]). Our particular focus is on the reported dispersivities of large amount (larger than 100m) and large measurement scales (in the order of kilometers). We aim to evaluate current theories of transport against a critical "mass" of field experiments and to bracket the conditions of their applicability. We further aim to evaluate the adequacy of the field sampling techniques that were employed from the perspective of more than 30 years development in modeling and field characterization. Given the tremendous progress in field data acquisition techniques and new insights gained, it is reasonable to expect that interpretations of past experiments may be flawed due to the limitations or inadequacy of field sampling techniques. Gelhar, L.W., C. Welty, and K.R. Rehfeldt, 1992, A critical review of data on field-scale dispersion in aquifers, Water Resources Research 28, No. 7: 1955-1974. Schulze-Makuch, D., 2005, Longitudinal dispersivity data and implications for scaling behavior, Ground Water, Vol. 43, No. 3, 443-456. Neuman, S.P., 1990

  17. Law, Democracy & Development

    African Journals Online (AJOL)

    The evolution and implementation of democracy, good governance practices, human rights and socio-economic development are critical issues facing South Africa and Africa as a whole. Law interacts with this process in ways that may promote or inhibit it. Law, Democracy & Development addresses this interaction. Our aim ...

  18. Oromia Law Journal

    African Journals Online (AJOL)

    The Oromia Law Journal covers articles, book reviews, legislative and case comments related to legal, economic, political and social issues arising in relation to Oromia, Ethiopian, and other related International Laws. As such, the journal has two audiences-primary and secondary. The primary ones are legal professionals ...

  19. EU Food Law Handbook

    NARCIS (Netherlands)

    Meulen, van der B.M.J.

    2014-01-01

    The twenty-first century has witnessed a fundamental reform of food law in the European Union, to the point where modern EU food law has now come of age. This book presents the most significant elements of these legal developments with contributions from a highly qualified team of academics and

  20. Women Law Professors.

    Science.gov (United States)

    Fossum, Donna

    1980-01-01

    Women have made considerable progress toward becoming part of tenure-track legal faculties, but women law professors continue to be academically disproportionately inbred and overrepresented in some areas, such as family law and legal research and writing. (Journal availability: American Bar Foundation, 1155 E. 60th St., Chicago, IL 60637.) (MSE)

  1. Women in Law Enforcement.

    Science.gov (United States)

    Jones, Regina

    1991-01-01

    The lack of roles for African-American female police officers has not stopped black women from gaining momentum in law enforcement. Women still comprise less than 10 percent of all police officers, but growing numbers of black women are finding meaningful work in law enforcement. (SLD)

  2. California Library Laws, 2009

    Science.gov (United States)

    Smith, Paul G., Ed.

    2009-01-01

    California Library Laws 2009 is a selective guide to state laws and related materials that most directly affect the everyday operations of public libraries and organizations that work with public libraries. It is intended as a convenient reference, not as a replacement for the annotated codes or for legal advice. The guide is organized as follows.…

  3. Revising China's Environmental Law

    NARCIS (Netherlands)

    He, G.; Zhang, L.; Mol, A.P.J.; Lu, Y.; Liu, Wenling; Liu, J.

    2013-01-01

    China's Environmental Protection Law (EPL) is the main national environmental legislative framework. Yet the environmental legal system is incomplete, and implementation and enforcement of environmental laws have shown major shortcomings (1–3). A controversial attempt to revise the EPL could have

  4. Model(ing) Law

    DEFF Research Database (Denmark)

    Carlson, Kerstin

    The International Criminal Tribunal for the former Yugoslavia (ICTY) was the first and most celebrated of a wave of international criminal tribunals (ICTs) built in the 1990s designed to advance liberalism through international criminal law. Model(ing) Justice examines the case law of the ICTY...

  5. Introduction to planning law

    International Nuclear Information System (INIS)

    Ronellenfitsch, M.

    1986-01-01

    The author surveys the planning law in the Federal Republic of Germany. He deals with general regulations of the administrative procedure and land-use planning procedure and the main special rules of planning law, according to the Atomic Energy Act, the Nuclear Installation Ordinance and the Federal Act on the Protection against Nuisances. (WG) [de

  6. The Corporate Law Curriculum

    Science.gov (United States)

    Mofsky, James S.

    1976-01-01

    On the premise that corporate counsel must be an able diagnostician before he can focus on highly specialized and interrelated issues of business law, the author suggests an approach to corporate law curriculum in which the basic course balances the quality and quantity of material designed to create the needed sensitivity. (JT)

  7. Laws of Network Value

    Directory of Open Access Journals (Sweden)

    Juan M.C. Larrosa

    2016-12-01

    Full Text Available The valuation of a social network is an issue that has been addressed based on simplifying approaches. Various value laws have been stipulated, which are largely atheoretical but have been effectively used to estimate the potential economic value of social network-based firms. This review highlights the various contributions used in the recent literature on networks valuation laws.

  8. Law Education Resources.

    Science.gov (United States)

    Letwin, Alita Zurav

    1983-01-01

    Course outlines and timelines for a junior high school elective, "Youth and the Law," and a senior high school elective, "Criminal and Civil Law," are provided. A sample brochure about a supplementary television series for the junior high course is also included. (SR)

  9. Social Studies: Law Education.

    Science.gov (United States)

    Curriculum Review, 1979

    1979-01-01

    Reviews 11 series, texts, supplements, kits, and professional references for law instruction, including civil and criminal law, the Bill of Rights, and controversial legal issues: arson, gun control, capital punishment, and euthanasia. While all grade levels are covered, the emphasis is on secondary-level materials. (SJL)

  10. The Law of Elasticity

    Science.gov (United States)

    Cocco, Alberto; Masin, Sergio Cesare

    2010-01-01

    Participants estimated the imagined elongation of a spring while they were imagining that a load was stretching the spring. This elongation turned out to be a multiplicative function of spring length and load weight--a cognitive law analogous to Hooke's law of elasticity. Participants also estimated the total imagined elongation of springs joined…

  11. Essay on nuclear law

    International Nuclear Information System (INIS)

    Puig, Diva

    1994-01-01

    This book is divided in seven parts, covering international organizations in nuclear energy. agreements, nuclear laws and environment, national legislation program and Uruguayan legislation. The texts of the nuclear laws in Uruguay are reproduced, and several aspects on nuclear energy are discussed

  12. International nuclear law

    International Nuclear Information System (INIS)

    Mello, M.M. de.

    1981-01-01

    The peculiar feature of a developing nuclear law is discussed. Opinions from various writers and jurists are presented. It is concluded that it should be considered as international law, whose main sources are the various treaties, conventions and agreements. (A.L.) [pt

  13. Civil Law and Neuroscience

    NARCIS (Netherlands)

    de Kogel, C.H.; Schrama, W.M.; Smit, M.

    2014-01-01

    The relationship between the brain and human behaviour is receiving increasing attention in legal practice. Much has already been published about the role of neuroscience in criminal law, but surprisingly little is known about its role in civil law. In this contribution, the relevance of

  14. Climate Change Law

    NARCIS (Netherlands)

    Farber, D.A.; Peeters, Marjan

    2016-01-01

    This book brings together over seventy fifty authors for a comprehensive examination of the emerging global regime of climate change law. Despite the relative youth of climate change law, we can already begin to see the outlines of legal regimes addressing climate change mitigation and adaptation

  15. European food law handbook

    NARCIS (Netherlands)

    Meulen, van der B.M.J.; Velde, van der M.; Szajkowska, A.; Verbruggen, R.

    2008-01-01

    This handbook analyses and explains the institutional, substantive and procedural elements of EU food law, taking the General Food Law as a focus point. Principles are discussed as well as specific rules addressing food as a product, the processes related to food and communication about food through

  16. Benford's Law in Astronomy

    Indian Academy of Sciences (India)

    Benford's law predicts the occurrence of the -th digit of numbers in datasets originating from various sources all over the world, ranging from financial data to atomic spectra. It is intriguing that although many features of Benford's law have been proven, it is still not fully understood mathematically. In this paper we ...

  17. Expropriation law in France

    OpenAIRE

    Melot, Romain

    2015-01-01

    In this publication, the editors present the first comparative overview of expropriation law in Europe covering 15 different jurisdictions. For many of the countries represented, this publication is the first English-language description of their national expropriation law. This survey provides a lot of information for all practitioners in the field of expropriation of land.

  18. Teaching Information Technology Law

    Science.gov (United States)

    Taylor, M. J.; Jones, R. P.; Haggerty, J.; Gresty, D.

    2009-01-01

    In this paper we discuss an approach to the teaching of information technology law to higher education computing students that attempts to prepare them for professional computing practice. As information technology has become ubiquitous its interactions with the law have become more numerous. Information technology practitioners, and in particular…

  19. Spurious dispersion effects at FLASH

    International Nuclear Information System (INIS)

    Prat, Eduard

    2009-07-01

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  20. Spurious dispersion effects at FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Prat, Eduard

    2009-07-15

    The performance of the Free-Electron Laser (FEL) process imposes stringent demands on the transverse trajectory and size of the electron beam. Since transverse dispersion changes off-energy particle trajectories and increases the effective beam size, dispersion must be controlled. This thesis treats the concept of dispersion in linacs, and analyses the impact of dispersion on the electron beam and on the FEL process. It presents generation mechanisms for spurious dispersion, quantifying its importance for FLASH (Free-electron Laser in Hamburg) and the XFEL (European X-ray Free-Electron Laser). A method for measuring and correcting dispersion and its implementation in FLASH is described. Experiments of dispersion e ects on the transverse beam quality and on the FEL performance are presented. (orig.)

  1. Dispersion stability of thermal nanofluids

    Directory of Open Access Journals (Sweden)

    Fan Yu

    2017-10-01

    Full Text Available Thermal nanofluids, the engineered fluids with dispersed functional nanoparticles, have exhibited extraordinary thermophysical properties and added functionalities, and thus have enabled a broad range of important applications. The poor dispersion stability of thermal nanofluids, however, has been considered as a long-existing issue that limits their further development and practical application. This review overviews the recent efforts and progresses in improving the dispersion stability of thermal nanofluids such as mechanistic understanding of dispersion behavior of nanofluids, examples of both water-based and oil-based nanofluids, strategies to stabilize nanofluids, and characterization techniques for dispersion behavior of nanofluids. Finally, on-going research needs, and possible solutions to research challenges and future research directions in exploring stably dispersed thermal nanofluids are discussed. Keywords: Thermal nanofluids, Dispersion, Aggregation, Electrostatic stabilization, Steric stabilization

  2. The incorporation of public international law into municipal law and ...

    African Journals Online (AJOL)

    Monism and dualism represent two different approaches towards the relationship between public international law and municipal law. While the former views public international law and municipal law as a single legal system, the latter regards these two areas of law as separate and distinct legal systems that exist ...

  3. Creating EU law judges

    DEFF Research Database (Denmark)

    Mayoral Diaz-Asensio, Juan Antonio; Jaremba, Urszula; Nowak, Tobias

    2014-01-01

    The judicial protection system in the European Union (EU) is premised on the fact that national judges are supposed to act as decentralized EU judges. This role is exercised through tools enshrined in, inter alia, primacy, direct and indirect effect of EU law, and the preliminary ruling procedure....... However, a number of studies show that national judges experience difficulties in exercising EU competences due to their lack of knowledge in the field of EU law. In this contribution we study the differences in the level of self-evaluation of EU law knowledge among judges, which consequently influence...... the way judges approach EU law. For that purpose we question the relevance of several institutional and socio-legal factors, such as organization of the judiciary, generation, the system of legal education and judicial training and practical experience with EU law. Our analysis is based on data collected...

  4. Phonon dispersion in vanadium

    International Nuclear Information System (INIS)

    Ivanov, A.S.; Rumiantsev, A.Yu.

    1999-01-01

    Complete text of publication follows. Phonon dispersion curves in Vanadium metal are investigated by neutron inelastic scattering using three-axis spectrometers. Due to extremely low coherent scattering amplitude of neutrons in natural isotope mixture of vanadium the phonon frequencies could be determined in the energy range below about 15 meV. Several phonon groups were measured with the polarised neutron scattering set-up. It is demonstrated that the intensity of coherent inelastic scattering observed in the non-spin-flip channel vanishes in the spin-flip channel. The phonon density of states is measured on a single crystal keeping the momentum transfer equal to a vector of reciprocal lattice where the coherent inelastic scattering is suppressed. Phonon dispersion curves in vanadium, as measured by neutron and earlier by X-ray scattering, are described in frames of a charge-fluctuation model involving monopolar and dipolar degrees of freedom. The model parameters are compared for different transition metals with body-centred cubic-structure. (author)

  5. Dispersion and current measurements

    International Nuclear Information System (INIS)

    Boelskifte, S.

    1986-04-01

    A model for the simulation of particle movements in water should incorporate the mutual distance dependent correlation. As long as reliable data are given accessible a model can be created of the dispersion in a given area from a statistical description of turbulence. Current measurements have been performed in an area north of the Swedish nuclear power plant Barsebaeck, and statistical time series analysis have made it possible to estimate multivariate autoregressive moving-average (ARMA) models for these data using the Box-Jenkins method. The correlation structure for the area has been investigated in detail. Transport and dispersion models for the marine environment are used in estimating doses to the population from the aquatic food chain. Some of these models are described with special emphasis on the time and length scales they cover. Furthermore, to illustrate the background of the simulation model, short introductuions are given to health physics, time series analysis, and turbulence theory. Analysis of the simulation model shows the relative importance of the different parameters. The model can be expanded to conditional simulation, where the current measurements are used directly to simulate the movement of one of the particles. Results from the model are also compared to results from a sampling of bioindicators (Fucus vesiculosus) along the Danish coast. The reliability of bioindicators in this kind of experiment is discussed. (author)

  6. Center-vortex baryonic area law

    International Nuclear Information System (INIS)

    Cornwall, John M.

    2004-01-01

    We correct an unfortunate error in an earlier work of the author, and show that in the center-vortex picture of QCD [gauge group SU(3)] the asymptotic quenched baryonic area law is the so-called Y law, described by a minimal area with three surfaces spanning the three quark world lines and meeting at a central Steiner line joining the two common meeting points of the world lines. (The earlier claim was that this area law was a so-called Δ law, involving three extremal areas spanning the three pairs of quark world lines.) By asymptotic we mean the Y law holds at asymptotically large quark separations from each other; at separations of the order of the gauge-theory scale length, there may be Δ-like contributions. We give a preliminary discussion of the extension of these results to SU(N),N>3. These results are based on the (correct) baryonic Stokes' theorem given in the earlier work claiming a Δ law. The Y-form area law for SU(3) is in agreement with the most recent lattice calculations

  7. Newton's law of cooling revisited

    International Nuclear Information System (INIS)

    Vollmer, M

    2009-01-01

    The cooling of objects is often described by a law, attributed to Newton, which states that the temperature difference of a cooling body with respect to the surroundings decreases exponentially with time. Such behaviour has been observed for many laboratory experiments, which led to a wide acceptance of this approach. However, the heat transfer from any object to its surrounding is not only due to conduction and convection but also due to radiation. The latter does not vary linearly with temperature difference, which leads to deviations from Newton's law. This paper presents a theoretical analysis of the cooling of objects with a small Biot number. It is shown that Newton's law of cooling, i.e. simple exponential behaviour, is mostly valid if temperature differences are below a certain threshold which depends on the experimental conditions. For any larger temperature differences appreciable deviations occur which need the complete nonlinear treatment. This is demonstrated by results of some laboratory experiments which use IR imaging to measure surface temperatures of solid cooling objects with temperature differences of up to 300 K.

  8. The Practice of Transnational Law

    CERN Document Server

    2000-01-01

    Contents :"The new law merchant and the global market place" by Klaus Peter Berger, "The CENTRAL enquiry on the use of transnational law in international contract law and arbitration", "The UNIDROIT principles and transnational law" by Michael Joachim Bonell, "Examples for the practical application of transnational law", "The questionnaire and results of the CENTRAL enquiry"

  9. SMED - Sulphur MEditerranean Dispersion

    Science.gov (United States)

    Salerno, Giuseppe G.; Sellitto, Pasquale; Corradini, Stefano; Di Sarra, Alcide Giorgio; Merucci, Luca; Caltabiano, Tommaso; La Spina, Alessandro

    2016-04-01

    Emissions of volcanic gases and particles can have profound impacts on terrestrial environment, atmospheric composition, climate forcing, and then on human health at various temporal and spatial scales. Volcanic emissions have been identified as one of the largest sources of uncertainty in our understanding of recent climate change trends. In particular, a primary role is acted by sulphur dioxide emission due to its conversion to volcanic sulphate aerosol via atmospheric oxidation. Aerosols may play a key role in the radiative budget and then in photochemistry and tropospheric composition. Mt. Etna is one of the most prodigious and persistent emitters of gasses and particles on Earth, accounting for about 10% of global average volcanic emission of CO2 and SO2. Its sulphur emissions stand for 0.7 × 106 t S/yr9 and then about 10 times bigger than anthropogenic sulphur emissions in the Mediterranean area. Centrepiece of the SMED project is to advance the understanding of volcanogenic sulphur dioxide and sulphate aerosol particles dispersion and radiative impact on the downwind Mediterranean region by an integrated approach between ground- and space-based observations and modelling. Research is addressed by exploring the potential relationship between proximal SO2 flux and aerosol measured remotely in the volcanic plume of Mt. Etna between 2000 and 2014 and distal aerosol ground-based measurements in Lampedusa, Greece, and Malta from AERONET network. Ground data are combined with satellite multispectral polar and geostationary imagers able to detect and retrieve volcanic ash and SO2. The high repetition time of SEVIRI (15 minutes) will ensure the potential opportunity to follow the entire evolution of the volcanic cloud, while, the higher spatial resolution of MODIS (1x1 km2), are exploited for investigating the probability to retrieve volcanic SO2 abundances from passive degassing. Ground and space observations are complemented with atmospheric Lagrangian model

  10. Dispersive transport across interfaces

    Science.gov (United States)

    Berkowitz, Brian; Adler, Pierre

    2015-04-01

    Experiments demonstrating asymmetrical dispersive transport of a conservative tracer across interfaces between different porous materials have recently been performed. Here, this phenomenon is studied numerically on the pore scale. The flow field is derived by solving the Stokes equation. The dispersive transport is simulated by a large number of particles undergoing random walks under the simultaneous action of convection and diffusion. Two main two-dimensional configurations are studied; each consists of two segments (called coarse and fine) with the same structure, porosity, and length along the main flow, but different characteristic solid/pore sizes. One structure consists of two channels containing cavities of different sizes, and the second of square "grains" of different sizes. At time t=0, a large number of particles is injected (as a pulse) around a given cross-section. The corresponding breakthrough curves (BTCs) are registered as functions of time at six different cross sections. Calculations are made twice; in the first case (CtoF), particles are injected in the coarse side and are transported towards the fine one; in the second one (FtoC), the opposite case is studied. These calculations are performed for various Péclet numbers (Pe). Comparison of the resulting BTCs shows features that are similar to experimental observations, but with qualitative and quantitative differences. The influences of the medium, of the injection and observation planes, and of Pe are detailed and discussed. A BTC for pulse injection can be characterized by its maximum M(t_M) and the time tM at which it occurs. The observed differences for channels bounded by cavities are very small. However for the granular structures, M(t_M) is always larger for FtoC than for CtoF ; tM depends on all the parameters, namely Pe, the size ratio between the large and small grains, the injection and the observation planes. The numerical results are systematically compared with solutions of one

  11. Islamic law of tort

    OpenAIRE

    Mohamad, Abdul Basir Bin

    1997-01-01

    The aim of this thesis is to discover cases and principles governing tort in Islamic law. The study is divided into six chapters, an introduction and a conclusion. The Introduction contains the explanation of the general characteristic of crime and tort, the scope, the importance of the study, methodology and the relevant literature of the thesis. Chapter one defines Western and Islamic law of tort, the existence of tort in Islām, some similar concepts between Western and Islām on the law o...

  12. Reconfiguring trade mark law

    DEFF Research Database (Denmark)

    Elsmore, Matthew James

    2013-01-01

    -border setting, with a particular focus on small business and consumers. The article's overall message is to call for a rethink of received wisdom suggesting that trade marks are effective trade-enabling devices. The case is made for reassessing how we think about European trade mark law.......First, this article argues that trade mark law should be approached in a supplementary way, called reconfiguration. Second, the article investigates such a reconfiguration of trade mark law by exploring the interplay of trade marks and service transactions in the Single Market, in the cross...

  13. Law, Literature and Society

    Directory of Open Access Journals (Sweden)

    Ursula Miranda Bahiense de Lyra

    2016-06-01

    Full Text Available This research aims to highlight the importance of literature in critical thinking about the law, coupled with the search for the emergence of an autonomous political subject and as a possibility of materialization of a new right . This shall be used , bibliographic research , seeking at first discuss the historical background of the "Law and Literature Moviment " to later approach the thought of Michel Foucault , their ideas about power, the constitution subjectivity , the ethical dimension of the subject and the care of itself, the Aufklärung and its conception of this new law.

  14. Culture and Contract Laws

    DEFF Research Database (Denmark)

    Lando, Ole

    2007-01-01

    In the article it is argued that the wish to preserve the cultural values of national law should not prevent the EU from preparing a Code or an Optional Instrument. The no-code countries on the British Isles and in Scandinavia are the most ardent opponents to the idea of unifying European Contract...... Law by way of a code on Contracts. In both these regions however the absence of a code causes problems. In England a prominent writer has found that the major weakness of the judge-made law is its immense diffusion and the consequent difficulty of access to it and the Nordic countries face the same...

  15. Changes in environmental law

    International Nuclear Information System (INIS)

    Mayer-Tasch, P.C.

    1978-01-01

    In this study the changing process of environmental law is depicted which is marked by the ecological crisis and the increasing pressure of the ecological movement. Main emphasis is laid on the analysis of the reform of the ecological licensing and voidance procedures which is in the centre of the discussion about (environmental) law policy as well as on the jurisprudential enforcement of the basic environmental right on life and physical integrity. The volume ends with a study on 'Nuclear Energy, Law and Judiciary Power' - a subject which is of immediate interest and special significance with its far-reaching political consequences for ecology, energy, and economics. (orig.) [de

  16. Business Law, Europe

    DEFF Research Database (Denmark)

    Fomcenco, Alex; Werlauff, Erik

    This book is a must-have for any business advisor that operates on a cross-border level in the European Union, EU. Regardless of whether you already have solid knowledge about doing business in the EU or you are just taking your first steps on this corporate scene, Business Law, Europe should...... be the book within your reach. We call it “Our Corporate Bible”. In an easily comprehendible way we address some of the most essential issues of business law, and provide guidelines and clarity for understanding and proper application of the legal provisions that govern business law in Europe....

  17. Hair treatment process providing dispersed colors by light diffraction

    Science.gov (United States)

    Sutton, Richard Matthew Charles; Lamartine, Bruce Carvell; Orler, E. Bruce; Song, Shuangqi

    2015-12-22

    A hair treatment process for providing dispersed colors by light diffraction including (a) coating the hair with a material comprising a polymer, (b) pressing the hair with a pressing device including one or more surfaces, and (c) forming a secondary nanostructured surface pattern on the hair that is complementary to the primary nanostructured surface pattern on the one or more surfaces of the pressing device. The secondary nanostructured surface pattern diffracts light into dispersed colors that are visible on the hair. The section of the hair is pressed with the pressing device for from about 1 to 55 seconds. The polymer has a glass transition temperature from about 55.degree. C. to about 90.degree. C. The one or more surfaces include a primary nanostructured surface pattern.

  18. Russian Law and Globalization

    Directory of Open Access Journals (Sweden)

    David Fishman

    2016-01-01

    Full Text Available The Faculty of Law of the University of Helsinki is committed to diverse and internationally collaborative approaches to studying various legal systems in the context of comparative law, and UHLS and the Law Faculty of the National Research University, Higher School of Economics have developed an ongoing program to undertake this effort. The original annual conference series on the Development of Russian Law was launched in 2008 as an initiative to further knowledge and critical thinking about Russian law during its period of transition and modernization. The conference is held annually and brings together legal practitioners and scholars from Russia, Finland and elsewhere to discuss important matters of Russian law, legal reform, and legal practice. Prior years’ Conference themes have included discussions of legal reforms, the justice system, the Russian legal profession, human rights, civil and business law, legal policy, rule-of-law and market economy.This year’s program was designed to attract law faculty, scholars from different disciplines, and also practicing lawyers, to address a wide range of topics grouped around the general theme of how the phenomenon and challenges of globalization affect Russian legal system development. The call for papers included: (i Relationships between Russian domestic and international law, (ii The impacts of international legal institutions on the development of Russian law(s, (iii Globalization in the field of business law, (iv Global law & Russian legal theory, (v Regional models of legal cooperation and Russia’s participation, (vi Transnational legal problems in areas such as constitutionalism and rule-of-law, (vii Theoretical and applied implications of the concept of global transplants, and (viii A global human rights agenda, including Russia’s place in this agenda.This was a very ambitious and multi-faceted undertaking. Through a process of careful evaluation, the Conference organizers produced

  19. Progress in urban dispersion studies

    DEFF Research Database (Denmark)

    Batchvarova, E.; Gryning, Sven-Erik

    2006-01-01

    The present Study addresses recent achievements in better representation Of the urban area structure in meteorology and dispersion parameterisations. The setup and Main Outcome of several recent dispersion experiments in Urban areas and their use in model validation are discussed. The maximum...... BUBBLE Tracer Experiment) the horizontal spread of the plume corresponds to a Lagrangian time scale bigger than the value for ground Sources. Turbulence measurements LIP to 3-5 times the building height Lire needed for direct use in dispersion Calculations....

  20. Lawful Permanent Residents - Annual Report

    Data.gov (United States)

    Department of Homeland Security — A lawful permanent resident (LPR) or 'green card' recipient is defined by immigration law as a person who has been granted lawful permanent residence in the United...

  1. Dispersion of Nanomaterials in Aqueous Media: Towards Protocol Optimization.

    Science.gov (United States)

    Kaur, Inder; Ellis, Laura-Jayne; Romer, Isabella; Tantra, Ratna; Carriere, Marie; Allard, Soline; Mayne-L'Hermite, Martine; Minelli, Caterina; Unger, Wolfgang; Potthoff, Annegret; Rades, Steffi; Valsami-Jones, Eugenia

    2017-12-25

    The sonication process is commonly used for de-agglomerating and dispersing nanomaterials in aqueous based media, necessary to improve homogeneity and stability of the suspension. In this study, a systematic step-wise approach is carried out to identify optimal sonication conditions in order to achieve a stable dispersion. This approach has been adopted and shown to be suitable for several nanomaterials (cerium oxide, zinc oxide, and carbon nanotubes) dispersed in deionized (DI) water. However, with any change in either the nanomaterial type or dispersing medium, there needs to be optimization of the basic protocol by adjusting various factors such as sonication time, power, and sonicator type as well as temperature rise during the process. The approach records the dispersion process in detail. This is necessary to identify the time points as well as other above-mentioned conditions during the sonication process in which there may be undesirable changes, such as damage to the particle surface thus affecting surface properties. Our goal is to offer a harmonized approach that can control the quality of the final, produced dispersion. Such a guideline is instrumental in ensuring dispersion quality repeatability in the nanoscience community, particularly in the field of nanotoxicology.

  2. Probing Interfacial Water on Nanodiamonds in Colloidal Dispersion.

    Science.gov (United States)

    Petit, Tristan; Yuzawa, Hayato; Nagasaka, Masanari; Yamanoi, Ryoko; Osawa, Eiji; Kosugi, Nobuhiro; Aziz, Emad F

    2015-08-06

    The structure of interfacial water layers around nanoparticles dispersed in an aqueous environment may have a significant impact on their reactivity and on their interaction with biological species. Using transmission soft X-ray absorption spectroscopy in liquid, we demonstrate that the unoccupied electronic states of oxygen atoms from water molecules in aqueous colloidal dispersions of nanodiamonds have a different signature than bulk water. X-ray absorption spectroscopy can thus probe interfacial water molecules in colloidal dispersions. The impacts of nanodiamond surface chemistry and concentration on interfacial water electronic signature are discussed.

  3. Understanding scaling laws

    International Nuclear Information System (INIS)

    Lysenko, W.P.

    1986-01-01

    Accelerator scaling laws how they can be generated, and how they are used are discussed. A scaling law is a relation between machine parameters and beam parameters. An alternative point of view is that a scaling law is an imposed relation between the equations of motion and the initial conditions. The relation between the parameters is obtained by requiring the beam to be matched. (A beam is said to be matched if the phase-space distribution function is a function of single-particle invariants of the motion.) Because of this restriction, the number of independent parameters describing the system is reduced. Using simple models for bunched- and unbunched-beam situations. Scaling laws are shown to determine the general behavior of beams in accelerators. Such knowledge is useful in design studies for new machines such as high-brightness linacs. The simple model presented shows much of the same behavior as a more detailed RFQ model

  4. Motorcycle helmet use laws

    Science.gov (United States)

    2007-02-01

    The National Highway Traffic Safety : Administration encourages each : State to have and enforce a law : requiring all motorcycle operators : and passengers to wear a helmet : meeting FMVSS 218. Motorcycle : helmets provide the best protection : from...

  5. Law, Democracy & Development

    African Journals Online (AJOL)

    Law, Democracy & Development. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 5, No 2 (2001) >. Log in or Register to get access to full text downloads.

  6. The Biogenetic Law

    Science.gov (United States)

    Kapadia, Ramesh

    1975-01-01

    A criterion for development of syllabi for mathematics courses is discussed. This criterion is based on the biogenetic law that individuals develop through all the stages of the development of the species. (SD)

  7. Radiology and the law

    International Nuclear Information System (INIS)

    Bundy, A.L.

    1988-01-01

    This book contains 12 chapters. Some of the chapter titles are: The Law of Medical Malpractice: An Overview; The Radiologist as Defendant; The Radiologist as an Expert Witness; The Missed Diagnosis; Legalities of the Radiograph; and Angiography and Interventional Radiology

  8. 40 CFR Appendix C to Part 300 - Swirling Flask Dispersant Effectiveness Test, Revised Standard Dispersant Toxicity Test, and...

    Science.gov (United States)

    2010-07-01

    ... distillation profile Infrared spectrum UV fluorescence spectrum Pour Point +25 °F 0 °F Viscosity at 40 °C 14.09... Dispersant/Surface Washing Agent/Surface Collecting Agent/Miscellaneous Oil Spill Control Agent: 1. Flash.../DIS 8708 “Crude Petroleum Oil—Determination of Distillation Characteristics Using 15 Theoretical...

  9. Geometry of physical dispersion relations

    International Nuclear Information System (INIS)

    Raetzel, Dennis; Rivera, Sergio; Schuller, Frederic P.

    2011-01-01

    To serve as a dispersion relation, a cotangent bundle function must satisfy three simple algebraic properties. These conditions are derived from the inescapable physical requirements that local matter field dynamics must be predictive and allow for an observer-independent notion of positive energy. Possible modifications of the standard relativistic dispersion relation are thereby severely restricted. For instance, the dispersion relations associated with popular deformations of Maxwell theory by Gambini-Pullin or Myers-Pospelov are not admissible. Dispersion relations passing the simple algebraic checks derived here correspond to physically admissible Finslerian refinements of Lorentzian geometry.

  10. Statistical Thermodynamics of Disperse Systems

    DEFF Research Database (Denmark)

    Shapiro, Alexander

    1996-01-01

    Principles of statistical physics are applied for the description of thermodynamic equilibrium in disperse systems. The cells of disperse systems are shown to possess a number of non-standard thermodynamic parameters. A random distribution of these parameters in the system is determined....... On the basis of this distribution, it is established that the disperse system has an additional degree of freedom called the macro-entropy. A large set of bounded ideal disperse systems allows exact evaluation of thermodynamic characteristics. The theory developed is applied to the description of equilibrium...

  11. Operational Law Handbook

    Science.gov (United States)

    1993-01-01

    prevention. It requires Secretaries of Military Departments and Heads of Defense Agenres to develop and revise Hazardous Material Pollution Prevention Plans...or Federal law-i. Us.C. A33m Whenever the President considers that unlawful obstructions, combinations, or assemblages, or rebellion against the...enforce those laws or to suppress the rebellion . S-1 pmoxdo of dvun rghts-ir u. A333. The President, by using the militia or the armed forces, or both, or

  12. Euthanasia and criminal law

    OpenAIRE

    Ullrichová, Petra

    2008-01-01

    71 8. Summary- Euthanasia and criminal law Euthanasia is often regarded as a controversial topic that is being discussed all around the world. The legislative rules differ among the countries to various extent. The scope of this work is to offer a summary of legal regulations in euthanasia, particulary in the area of criminal law and a several examples of these regulations in Europe, USA and Australia. In the first chapter, the term of euthanasia is defined which is necessary for the purpose ...

  13. Water Law and Organization (Dutch version)

    NARCIS (Netherlands)

    Mostert, E.

    2012-01-01

    Lecture notes in DUTCH for course CIE5500, providing a detailed overview of Dutch and European water law concerning surface and groundwater, the North Sea and the Wadden Sea, water services, flood protection, spatial planning, nature protection, water management organizations (e.g. the water

  14. Dispersion bias, dispersion effect, and the aerosol-cloud conundrum

    International Nuclear Information System (INIS)

    Liu Yangang; Daum, Peter H; Guo Huan; Peng Yiran

    2008-01-01

    This work examines the influences of relative dispersion (the ratio of the standard deviation to the mean radius of the cloud droplet size distribution) on cloud albedo and cloud radiative forcing, derives an analytical formulation that accounts explicitly for the contribution from droplet concentration and relative dispersion, and presents a new approach to parameterize relative dispersion in climate models. It is shown that inadequate representation of relative dispersion in climate models leads to an overestimation of cloud albedo, resulting in a negative bias of global mean shortwave cloud radiative forcing that can be comparable to the warming caused by doubling CO 2 in magnitude, and that this dispersion bias is likely near its maximum for ambient clouds. Relative dispersion is empirically expressed as a function of the quotient between cloud liquid water content and droplet concentration (i.e., water per droplet), yielding an analytical formulation for the first aerosol indirect effect. Further analysis of the new expression reveals that the dispersion effect not only offsets the cooling from the Twomey effect, but is also proportional to the Twomey effect in magnitude. These results suggest that unrealistic representation of relative dispersion in cloud parameterization in general, and evaluation of aerosol indirect effects in particular, is at least in part responsible for several outstanding puzzles of the aerosol-cloud conundrum: for example, overestimation of cloud radiative cooling by climate models compared to satellite observations; large uncertainty and discrepancy in estimates of the aerosol indirect effect; and the lack of interhemispheric difference in cloud albedo.

  15. GENERAL PRINCIPLES OF LAW

    Directory of Open Access Journals (Sweden)

    Elena ANGHEL

    2016-05-01

    Full Text Available According to Professor Djuvara “law can be a science, and legal knowledge can also become science when, referring to a number as large as possible of acts of those covered by law, sorts and connects them by their essential characters upon legal concepts or principles which are universally valid, just like the laws of nature”. The general principles of law take a privileged place in the positive legal order and represent the foundation of any legal construction. The essence of the legal principles resides in their generality. In respect of the term “general”, Franck Moderne raised the question on the degree of generality used in order to define a principle as being general – at the level of an institution, of a branch of the law or at the level of the entire legal order. The purpose of this study is to find out the characteristics of law principles. In our opinion, four characteristics can be mentioned.

  16. Consumer in insurance law

    Directory of Open Access Journals (Sweden)

    Čorkalo Milena

    2016-01-01

    Full Text Available The paper analyses the notion of consumer in the European Union law, and, in particular, the notion of consumer in insurance law. The author highligts the differences between the notion of consumer is in aquis communautaire and in insurance law, discussing whether the consumer can be defined in both field in the same way, concerning that insurance services differ a lot from other kind of services. Having regarded unequal position of contracting parties and information and technical disadvantages of a weaker party, author pleads for broad definition of consumer in insurance law. In Serbian law, the consumer is not defined in consistent way. That applies on Serbian insurance law as well. Therefore, the necessity of precise and broad definition of consumes is underlined, in order to delimit the circle of subject who are in need for protection. The author holds that the issue of determination of the circle of persons entitled to extended protection as consumers is of vital importance for further development of insurance market in Serbia.

  17. Trade-offs between seed dispersal and dormancy in an amphi-basicarpic cold desert annual.

    Science.gov (United States)

    Lu, Juan J; Tan, Dun Y; Baskin, Jerry M; Baskin, Carol C

    2013-12-01

    Several studies have demonstrated trade-offs between depth of seed dormancy and dispersal ability for diaspore-dimorphic species. However, relatively little is known about trade-offs between these two life history traits for a species that produces more than two diaspore morphs. The aim of this study was to investigate the relationship between seed dormancy and dispersal in Ceratocarpus arenarius, an amphi-basicarpic cold desert annual that produces a continuum of dispersal unit morphs. A comparison was made of dispersal and dormancy breaking/germination responses of dispersal units from ground level (a), the middle of the plant canopy (c) and the top of the plant canopy (f). Various features of the morphology and mass of dispersal units and fruits (utricles) were measured. The role of bracteoles in diaspore dispersal by wind, settlement onto the soil surface and dormancy/germination was determined by comparing responses of intact dispersal units and fruits. Movement of dispersal units by wind and animals, seed after-ripening, germination phenology and the presence of water-soluble germination inhibitors in bracteoles were tested using standard procedures. Dispersal units a, c and f differed in morphology and mass; in the majority of cases, extremes were exhibited by a and f, with c being intermediate. Overall, relative dispersal ability was f > c > a, whereas relative intensity of dormancy was a > c > f. Bracteoles increased dispersal distance by wind, enhanced settlement of diaspores onto the soil surface and mechanically inhibited germination. The results provide evidence for a model in which there is a continuous inverse-linear relationship between diaspore dispersal ability and depth of dormancy. Thus, dispersal unit heteromorphism of C. arenarius results in a continuum, from no dispersal ability/high dormancy (dispersal unit a) to high dispersal ability/low dormancy (unit f), which may be a bet-hedging strategy in the cold desert environment.

  18. Bayesian inversion of microtremor array dispersion data in southwestern British Columbia

    Science.gov (United States)

    Molnar, Sheri; Dosso, Stan E.; Cassidy, John F.

    2010-11-01

    This paper applies Bayesian inversion, with evaluation of data errors and model parametrization, to produce the most-probable shear-wave velocity profile together with quantitative uncertainty estimates from microtremor array dispersion data. Generally, the most important property for characterizing earthquake site response is the shear-wave velocity (VS) profile. The microtremor array method determines phase velocity dispersion of Rayleigh surface waves from multi-instrument recordings of urban noise. Inversion of dispersion curves for VS structure is a non-unique and non-linear problem such that meaningful evaluation of confidence intervals is required. Quantitative uncertainty estimation requires not only a non-linear inversion approach that samples models proportional to their probability, but also rigorous estimation of the data error statistics and an appropriate model parametrization. This paper applies a Bayesian formulation that represents the solution of the inverse problem in terms of the posterior probability density (PPD) of the geophysical model parameters. Markov-chain Monte Carlo methods are used with an efficient implementation of Metropolis-Hastings sampling to provide an unbiased sample from the PPD to compute parameter uncertainties and inter-relationships. Nonparametric estimation of a data error covariance matrix from residual analysis is applied with rigorous a posteriori statistical tests to validate the covariance estimate and the assumption of a Gaussian error distribution. The most appropriate model parametrization is determined using the Bayesian information criterion, which provides the simplest model consistent with the resolving power of the data. Parametrizations considered vary in the number of layers, and include layers with uniform, linear and power-law gradients. Parameter uncertainties are found to be underestimated when data error correlations are neglected and when compressional-wave velocity and/or density (nuisance

  19. Predicting the consequence of natural and chemical dispersion for oil slick size over time

    NARCIS (Netherlands)

    Zeinstra-Helfrich, Marieke; Koops, Wierd; Murk, Albertinka J.

    2017-01-01

    Application of dispersants aims to enhance the natural dispersion process in order to reduce the size of the slick and the amount of oil at the surface. This study presents an approach for modeling the development of the surface oil slick as a function of the wind speed, oil viscosity, and

  20. The devil is in the dispersers: Predictions of landscape connectivity change with demography

    Science.gov (United States)

    Nicholas B. Elliot; Samuel A. Cushman; David W. Macdonald; Andrew J. Loveridge

    2014-01-01

    Concern about the effects of habitat fragmentation has led to increasing interest in dispersal and connectivity modelling. Most modern techniques for connectivity modelling have resistance surfaces as their foundation. However, resistance surfaces for animal movement are frequently estimated without considering dispersal, despite being the principal natural mechanism...

  1. Aerated concrete with mineral dispersed reinforcing additives

    Science.gov (United States)

    Berdov, G. I.; Ilina, L. V.; Mukhina, I. N.; Rakov, M. A.

    2015-01-01

    To guarantee the production of aerated concrete with the lowest average density while ensuring the required strength it is necessary to use a silica component with a surface area of 250-300 m2 / kg. The article presents experimental data on grinding the silica component together with clinker to the optimum dispersion. This allows increasing the strength of non-autoclaved aerated concrete up to 33%. Furthermore, the addition to aerated concrete the mixture of dispersed reinforcing agents (wollastonite, diopside) and electrolytes with multiply charged cations and anions (1% Fe2 (SO4)3; Al2 (SO4)3) provides the growth of aerated concrete strength at 30 - 75%. As a cohesive the clinker, crushed together with silica and mineral supplements should be used. This increases the strength of aerated concrete at 65% in comparing with Portland cement.

  2. Atmospheric tracer experiments for regional dispersion studies

    International Nuclear Information System (INIS)

    Heffter, J.L.; Ferber, G.J.

    1980-01-01

    Tracer experiments are being conducted to verify atmospheric transport and dispersion calculations at distances from tens to hundreds of km from pollutant sources. In one study, a 2 1/2 year sampling program has been carried out at 13 sites located 30 to 140 km from a source of 85 Kr at the Savannah River Plant in South Carolina. Average weekly concentrations as well as twice-daily concentrations were obtained. Sampling data and meteorological data, including surface, tower, and rawinsonde observations are available on magnetic tape for model verification studies. Some verification results for the Air Resources Laboratories Atmospheric Transort and Dispersion Model (ARL-ATAD) are shown for averaging periods from one week to two years

  3. Comparative law as method and the method of comparative law

    NARCIS (Netherlands)

    Hage, J.C.; Adams, M.; Heirbaut, D.

    2014-01-01

    This article addresses both the justificatory role of comparative law within legal research (comparative law as method) and the method of comparative law itself. In this connection two questions will be answered: 1. Is comparative law a method, or a set of methods, for legal research? 2. Does

  4. CATEGORY OF CIRCUMVENTION OF THE LAW IN RUSSIAN CIVIL LAW

    OpenAIRE

    Kamyshanskiy V. P.

    2014-01-01

    This article examines the concept of "circumvention of the law" with respect to Treaty law. The author finds that the direct loan category "circumvention of the law" in Treaty law can be estimated ambiguously. The specified category which is fragmentary reflected in the active Civil codex indicates a regulatory gap

  5. Learning the Law: Law Education for Young North Carolinians.

    Science.gov (United States)

    Edwards, Wanda Rushing; Carr, Edward G., Jr.

    Arranged in five chapters, this supplementary resource for junior high students contains information on the history, practical applications, and social consequences of the law. In chapter 1, students are introduced to the origin of laws through examination of a fable, the relationship between government and laws, types of laws, and law…

  6. Ogba Philosophy of Human Positive Law UA Dike Introduction Laws ...

    African Journals Online (AJOL)

    Religion Dept

    This research work is centered on the concept of human positive law in Ogba. Land of Rivers State, Nigeria. The law as promulgated in ... laws of the and which says that female dogs should not be allowed to live in Ogba Land. This law was ..... modern means of communication. Thus in addition to dispatching a town crier to ...

  7. Handbook on nuclear law

    International Nuclear Information System (INIS)

    Stoiber, C.; Baer, A.; Pelzer, N.; Tonhauser, W.

    2006-02-01

    The objective of this handbook is to assist States in drafting national legislation that provides an adequate legal basis for pursuing the economic and social benefits of nuclear energy and ionizing radiation. At the outset, therefore, it is important to offer a basic concept of nuclear law. In the light of these basic factors, nuclear law can be defined as: The body of special legal norms created to regulate the conduct of legal or natural persons engaged in activities related to fissionable materials, ionizing radiation and exposure to natural sources of radiation. Before attempting to identify which special aspects of nuclear law distinguish it from other types of law, it is important to highlight briefly the fundamental reason why a State would decide to make the major effort necessary in order to promulgate such legislation. Simply stated, the primary objective of nuclear law is: To provide a legal framework for conducting activities related to nuclear energy and ionizing radiation in a manner which adequately protects individuals, property and the environment. In light of this objective, it is particularly important that responsible authorities carefully assess their current nuclear energy activities and their plans for future nuclear energy development so that the legislation ultimately adopted is adequate. What are the characteristics of nuclear law that distinguish it from the other aspects of national law? A number of basic concepts, often expressed as fundamental principles, can be mentioned in this regard: (a) The safety principle. (B) The security principle. (C) The responsibility principle. (D) The permission principle. (E) The continuous control principle. (F) The compensation principle. (G) The sustainable development principle. (H) The compliance principle. (I) The independence principle. (J) The transparency principle. (K) The international co-operation principle

  8. Handbook on nuclear law

    International Nuclear Information System (INIS)

    Stoiber, C.; Baer, A.; Pelzer, N.; Tonhauser, W.

    2003-07-01

    The objective of this handbook is to assist States in drafting national legislation that provides an adequate legal basis for pursuing the economic and social benefits of nuclear energy and ionizing radiation. At the outset, therefore, it is important to offer a basic concept of nuclear law. In the light of these basic factors, nuclear law can be defined as: The body of special legal norms created to regulate the conduct of legal or natural persons engaged in activities related to fissionable materials, ionizing radiation and exposure to natural sources of radiation. Before attempting to identify which special aspects of nuclear law distinguish it from other types of law, it is important to highlight briefly the fundamental reason why a State would decide to make the major effort necessary in order to promulgate such legislation. Simply stated, the primary objective of nuclear law is: To provide a legal framework for conducting activities related to nuclear energy and ionizing radiation in a manner which adequately protects individuals, property and the environment. In light of this objective, it is particularly important that responsible authorities carefully assess their current nuclear energy activities and their plans for future nuclear energy development so that the legislation ultimately adopted is adequate. What are the characteristics of nuclear law that distinguish it from the other aspects of national law? A number of basic concepts, often expressed as fundamental principles, can be mentioned in this regard: (a) The safety principle; (b) The security principle; (c) The responsibility principle; (d) The permission principle; (e) The continuous control principle; (f) The compensation principle; (g) The sustainable development principle; (h) The compliance principle; (i) The independence principle; (j) The transparency principle; (k) The international co-operation principle

  9. Handbook on nuclear law

    International Nuclear Information System (INIS)

    Stoiber, C.; Baer, A.; Pelzer, N.; Tonhauser, W.

    2006-06-01

    The objective of this handbook is to assist States in drafting national legislation that provides an adequate legal basis for pursuing the economic and social benefits of nuclear energy and ionizing radiation. At the outset, therefore, it is important to offer a basic concept of nuclear law. In the light of these basic factors, nuclear law can be defined as: The body of special legal norms created to regulate the conduct of legal or natural persons engaged in activities related to fissionable materials, ionizing radiation and exposure to natural sources of radiation. Before attempting to identify which special aspects of nuclear law distinguish it from other types of law, it is important to highlight briefly the fundamental reason why a State would decide to make the major effort necessary in order to promulgate such legislation. Simply stated, the primary objective of nuclear law is: To provide a legal framework for conducting activities related to nuclear energy and ionizing radiation in a manner which adequately protects individuals, property and the environment. In light of this objective, it is particularly important that responsible authorities carefully assess their current nuclear energy activities and their plans for future nuclear energy development so that the legislation ultimately adopted is adequate. What are the characteristics of nuclear law that distinguish it from the other aspects of national law? A number of basic concepts, often expressed as fundamental principles, can be mentioned in this regard: (a) The safety principle. (B) The security principle. (C) The responsibility principle. (D) The permission principle. (E) The continuous control principle. (F) The compensation principle. (G) The sustainable development principle. (H) The compliance principle. (I) The independence principle. (J) The transparency principle. (K) The international co-operation principle

  10. Nest-mediated seed dispersal

    Science.gov (United States)

    Robert J. Warren; Jason P. Love; Mark A. Bradford

    2017-01-01

    Many plant seeds travel on the wind and through animal ingestion or adhesion; however, an overlooked dispersal mode may lurk within those dispersal modes. Viable seeds may remain attached or embedded within materials birds gather for nest building. Our objective was to determine if birds inadvertently transport seeds when they forage for plant materials to...

  11. Definition of global dispersion coefficients

    International Nuclear Information System (INIS)

    Naff, R.L.

    1983-10-01

    For estimation of a global longitudinal dispersivity at the Gorleben site, data available primarily consist of suites of geophysical logs from wells penetrating the Quaternary aquifer. A length scale for the principle aquifer at Gorleben is to be found. Samples are to be taken separately to estimate the variance in hydraulic conductivity (Taylor Analysis, Fickian dispersion process). (DG)

  12. Cardiovascular research: data dispersion issues

    Directory of Open Access Journals (Sweden)

    Roya Atiqi

    2010-02-01

    Full Text Available Biological processes are full of variations and so are responses to therapy as measured in clinical research. Estimators of clinical efficacy are, therefore, usually reported with a measure of uncertainty, otherwise called dispersion. This study aimed to review both the flaws of data reports without measure of dispersion and those with over-dispersion. Examples of estimators commonly reported without a measure of dispersion include: 1 number needed to treat; 2 reproducibility of quantitative diagnostic tests; 3 sensitivity / specificity; 4 Markov predictors; 5 risk profiles predicted from multiple logistic models. Data with large differences between response magnitudes can be assessed for over-dispersion by goodness of fit tests. The c2 goodness of fit test allows adjustment for over-dispersion. For most clinical estimators, the calculation of standard errors or confidence intervals is possible. Sometimes, the choice is deliberately made not to use the data fully, but to skip the standard errors and to use the summary measures only. The problem with this approach is that it may suggest inflated results. We recommend that analytical methods in clinical research should always attempt to include a measure of dispersion in the data. When large differences exist in the data, the presence of over-dispersion should be assessed and appropriate adjustments made.

  13. Turbulent dispersal promotes species coexistence

    Science.gov (United States)

    Berkley, Heather A; Kendall, Bruce E; Mitarai, Satoshi; Siegel, David A

    2010-01-01

    Several recent advances in coexistence theory emphasize the importance of space and dispersal, but focus on average dispersal rates and require spatial heterogeneity, spatio-temporal variability or dispersal-competition tradeoffs to allow coexistence. We analyse a model with stochastic juvenile dispersal (driven by turbulent flow in the coastal ocean) and show that a low-productivity species can coexist with a high-productivity species by having dispersal patterns sufficiently uncorrelated from those of its competitor, even though, on average, dispersal statistics are identical and subsequent demography and competition is spatially homogeneous. This produces a spatial storage effect, with an ephemeral partitioning of a ‘spatial niche’, and is the first demonstration of a physical mechanism for a pure spatiotemporal environmental response. ‘Turbulent coexistence’ is widely applicable to marine species with pelagic larval dispersal and relatively sessile adult life stages (and perhaps some wind-dispersed species) and complements other spatial and temporal storage effects previously documented for such species. PMID:20455921

  14. Dispersal and migration

    Directory of Open Access Journals (Sweden)

    Schwarz, C.

    2004-06-01

    Full Text Available Ringing of birds unveiled many aspects of avian migration and dispersal movements. However, there is even much more to be explored by the use of ringing and other marks. Dispersal is crucial in understanding the initial phase of migration in migrating birds as it is to understand patterns and processes of distribution and gene flow. So far, the analysis of migration was largely based on analysing spatial and temporal patters of recoveries of ringed birds. However, there are considerable biases and pitfalls in using recoveries due to spatial and temporal variation in reporting probabilities. Novel methods are required for future studies separating the confounding effects of spatial and temporal heterogeneity of recovery data and heterogeneity of the landscape as well. These novel approaches should aim a more intensive and novel use of the existing recovery data by taking advantage of, for instance, dynamic and multistate modeling, should elaborate schemes for future studies, and should also include other marks that allow a more rapid data collection, like telemetry, geolocation and global positioning systems, and chemical and molecular markers. The latter appear to be very useful in the delineating origin of birds and connectivity between breeding and non–breeding grounds. Many studies of migration are purely descriptive. However, King and Brooks (King & Brooks, 2004 examine if movement patterns of dolphins change after the introduction of a gillnet ban. Bayesian methods are an interesting approach to this problem as they provide a meaningful measure of the probability that such a change occurred rather than simple yes/no response that is often the result of classical statistical methods. However, the key difficulty of a general implementation of Bayesian methods is the complexity of the modelling —there is no general userfriendly package that is easily accessible to most scientists. Drake and Alisauskas (Drake & Alisauskas, 2004 examine the

  15. Ecological succession as an energy dispersal process.

    Science.gov (United States)

    Würtz, Peter; Annila, Arto

    2010-04-01

    Ecological succession is described by the 2nd law of thermodynamics. According to the universal law of the maximal energy dispersal, an ecosystem evolves toward a stationary state in its surroundings by consuming free energy via diverse mechanisms. Species are the mechanisms that conduct energy down along gradients between repositories of energy which consist of populations at various thermodynamic levels. The salient characteristics of succession, growing biomass production, increasing species richness and shifting distributions of species are found as consequences of the universal quest to diminish energy density differences in least time. The analysis reveals that during succession the ecosystem's energy transduction network, i.e., the food web organizes increasingly more effective in the free energy reduction by acquiring new, more effective and abandoning old, less effective species of energy transduction. The number of species does not necessarily peak at the climax state that corresponds to the maximum-entropy partition of species maximizing consumption of free energy. According to the theory of evolution by natural selection founded on statistical physics of open systems, ecological succession is one among many other evolutionary processes. Copyright (c) 2010 Elsevier Ireland Ltd. All rights reserved.

  16. Natural Law And Civil Law in John Locke

    Directory of Open Access Journals (Sweden)

    Gustavo Hessmann Dalaqua

    2015-01-01

    Full Text Available This paper deals with the relationship between natural law and civil law in John Locke’s philosophy. Although renowned scholars have claimed that such a relationship is deductive, this paper will try to show a different interpretation and argue that the relationship between civil law and natural law is one of determination. Far from being a mere deduction of an immutable natural law, civil law plays a determinative role in natural law. As we shall see, this interpretation highlights something that Locke held in high regard: the deliberative character of natural law. Citizens’ deliberation in the legislature to some extent creates natural law. Citizens are thus free to determine the law, and participating in such a determination is crucial to their political liberty. In this sense, as we shall explain, Locke’s political liberty is akin to republicanism.

  17. International Space Law

    Directory of Open Access Journals (Sweden)

    M. Lits

    2017-01-01

    Full Text Available It is well known that the modern day technologies that drive our global society are highly dependent on the use of outer space. For example, daily activities such as sending emails, making phone calls and carrying out bank transactions cannot be done unless satellite technologies are involved. When you catch a plane, the air traffic control is dependent on GPS. Even natural disaster management is dependent on satellite imaging. Taking into account the importance of this, it becomes increasingly necessary to be knowledgeable in the field of international law as it is the only sphere of law that reaches beyond the physical boundaries of the Earth, goes deep into space and provides protection for today’s society. With new steps being taken to exploit further the potentials of outer space, and with increasing talk of new space missions and new discoveries, current international space law is being placed under scrutiny, for it should be remembered that the major international legal documents in this field were adopted in the middle of the 20th century, and thus there are fears that the law may have become obsolete, irrelevant in the face of new challenges in the use of outer space. This paper delivers an analysis of existing international space law and attempts to raise several crucial issues pertinent in the area.

  18. Facile method for the preparation of water dispersible graphene using sulfonated poly(ether-ether-ketone) and its application as energy storage materials.

    Science.gov (United States)

    Kuila, Tapas; Mishra, Ananta Kumar; Khanra, Partha; Kim, Nam Hoon; Uddin, Md Elias; Lee, Joong Hee

    2012-06-26

    A simple and effective method for the preparation of water dispersible graphene using sulfonated poly(ether-ether-ketone) (SPEEK) has been described. The SPEEK macromolecules are noncovalently adsorbed on the surface of graphene through π-π interactions. The SPEEK-modified graphene (SPG) forms an aqueous dispersion that is stable for more than six months. An analysis of the ultraviolet-visible spectra shows that the aqueous dispersion of SPG obeys Beer's law and the molar extinction coefficient has been found to be 149.03 mL mg(-1) cm(-1). Fourier transform infrared, Raman, and X-ray photoelectron spectroscopy analyses confirm successful reduction and surface modification of graphene. An atomic force microscopy (AFM) analysis reveals the formation of a single layer of functionalized graphene. Transmission electron microscopy results are also in good agreement with the AFM analysis and support the formation of single-layer graphene. SPG shows good electrochemical cyclic stability during cyclic voltammetry and charge/discharge process when used as a supercapacitor electrode. A specific capacitance of 476 F g(-1) at a current density of 6.6 A g(-1) is observed for SPG materials.

  19. Towards a European contract law

    NARCIS (Netherlands)

    Hondius, E.H.

    2000-01-01

    I. Introduction. II. Subject-matter of this paper. III. Constitutionality. IV. Codification. V. Is it Feasible?VI. Howto proceed. VII. New problems: finding the Law. VIII. The Netherlands, Belgium and Germany. IX. Common Law and Civil Law. X. East and west. XI. European Community Law. XII.

  20. New Area Law in General Relativity.

    Science.gov (United States)

    Bousso, Raphael; Engelhardt, Netta

    2015-08-21

    We report a new area law in general relativity. A future holographic screen is a hypersurface foliated by marginally trapped surfaces. We show that their area increases monotonically along the foliation. Future holographic screens can easily be found in collapsing stars and near a big crunch. Past holographic screens exist in any expanding universe and obey a similar theorem, yielding the first rigorous area law in big bang cosmology. Unlike event horizons, these objects can be identified at finite time and without reference to an asymptotic boundary. The Bousso bound is not used, but it naturally suggests a thermodynamic interpretation of our result.