ERROR BOUNDS FOR SURFACE AREA ESTIMATORS BASED ON CROFTON’S FORMULA

Directory of Open Access Journals (Sweden)

Markus Kiderlen

2011-05-01

Full Text Available According to Crofton's formula, the surface area S(A of a sufficiently regular compact set A in Rd is proportional to the mean of all total projections pA (u on a linear hyperplane with normal u, uniformly averaged over all unit vectors u. In applications, pA (u is only measured in k directions and the mean is approximated by a finite weighted sum bS(A of the total projections in these directions. The choice of the weights depends on the selected quadrature rule. We define an associated zonotope Z (depending only on the projection directions and the quadrature rule, and show that the relative error bS (A/S (A is bounded from below by the inradius of Z and from above by the circumradius of Z. Applying a strengthened isoperimetric inequality due to Bonnesen, we show that the rectangular quadrature rule does not give the best possible error bounds for d =2. In addition, we derive asymptotic behavior of the error (with increasing k in the planar case. The paper concludes with applications to surface area estimation in design-based digital stereology where we show that the weights due to Bonnesen's inequality are better than the usual weights based on the rectangular rule and almost optimal in the sense that the relative error of the surface area estimator is very close to the minimal error.

Lp-dual affine surface area

Science.gov (United States)

Wei, Wang; Binwu, He

2008-12-01

According to the notion of Lp-affine surface area by Lutwak, in this paper, we introduce the concept of Lp-dual affine surface area. Further, we establish the affine isoperimetric inequality and the Blaschke-Santaló inequality for Lp-dual affine surface area. Besides, the dual Brunn-Minkowski inequality for Lp-dual affine surface area is presented.

Dual Orlicz geominimal surface area

Directory of Open Access Journals (Sweden)

Tongyi Ma

2016-02-01

Full Text Available Abstract The L p $L_{p}$ -geominimal surface area was introduced by Lutwak in 1996, which extended the important concept of the geominimal surface area. Recently, Wang and Qi defined the p-dual geominimal surface area, which belongs to the dual Brunn-Minkowski theory. In this paper, based on the concept of the dual Orlicz mixed volume, we extend the dual geominimal surface area to the Orlicz version and give its properties. In addition, the isoperimetric inequality, a Blaschke-Santaló type inequality, and the monotonicity inequality for the dual Orlicz geominimal surface areas are established.

Surface area, crystal morphology and characterization of transition alumina powders from a new gibbsite precursor

Directory of Open Access Journals (Sweden)

Antonio Carlos Vieira Coelho

2007-06-01

Full Text Available A new procedure was used to prepare a microcrystalline powder constituted by thin euhedral hexagonal gibbsite plates, 0.2 to 0.6 µm in diameter and 32 nm thick. The powder, fired between 200 and 1000 °C, produced chi and kappa transition aluminas. Alpha-alumina is formed from 1000 °C and recrystallized up to 1500 °C. At 1000 °C, kappa- and alpha-alumina coexisted, but kappa-alumina could only be characterized by SAED. The details of the internal organization of the transition alumina pseudomorphs were clearly observable in TEM due to the great thinness of the I-gibbsite plates. The specific surface area varied from pristine I-gibbsite (24.9 m².g-1 to chi- and kappa transition aluminas (25.4 m².g-1 at 1000 °C to alpha-alumina (4.0 m².g-1 at 1500 °C. The maximum value of specific surface area is 347 m².g-1 in chi-alumina powder at 300 °C, a difference from Bayer gibbsite, in which the chi-alumina highest surface area is 370 m².g-1 at 400 °C.

Cortical thickness, surface area, and folding alterations in male youths with conduct disorder and varying levels of callous-unemotional traits.

Science.gov (United States)

Fairchild, Graeme; Toschi, Nicola; Hagan, Cindy C; Goodyer, Ian M; Calder, Andrew J; Passamonti, Luca

2015-01-01

Previous studies have reported changes in gray matter volume in youths with conduct disorder (CD), although these differences are difficult to interpret as they may have been driven by alterations in cortical thickness, surface area (SA), or folding. The objective of this study was to use surface-based morphometry (SBM) methods to compare male youths with CD and age and sex-matched healthy controls (HCs) in cortical thickness, SA, and folding. We also tested for structural differences between the childhood-onset and adolescence-onset subtypes of CD and performed regression analyses to assess for relationships between CD symptoms and callous-unemotional (CU) traits and SBM-derived measures. We acquired structural neuroimaging data from 20 HCs and 36 CD participants (18 with childhood-onset CD and 18 with adolescence-onset CD) and analyzed the data using FreeSurfer. Relative to HCs, youths with CD showed reduced cortical thickness in the superior temporal gyrus, reduced SA in the orbitofrontal cortex (OFC), and increased cortical folding in the insula. There were no significant differences between the childhood-onset and adolescence-onset CD subgroups in cortical thickness or SA, but several frontal and temporal regions showed increased cortical folding in childhood-onset relative to adolescence-onset CD participants. Both CD subgroups also showed increased cortical folding relative to HCs. CD symptoms were negatively correlated with OFC SA whereas CU traits were positively correlated with insula folding. Cortical thinning in the superior temporal gyrus may contribute to the social cognitive impairments displayed by youths with CD, whereas reduced OFC SA may lead to impairments in emotion regulation and reward processing in youths with CD. The increased cortical folding observed in the insula may reflect a maturational delay in this region and could mediate the link between CU traits and empathy deficits. Altered cortical folding was observed in childhood-onset and

[Adsorption behavior and influence factors of p-nitroaniline on high surface area activated carbons prepared from plant stems].

Science.gov (United States)

Li, Kun-quan; Zheng, Zheng; Luo, Xing-zhang

2010-08-01

Low-cost and high surface area microporous activated carbons were prepared from Spartina alternilora and cotton stalk with KOH activation under the conditions of impregnation ratio of 3.0, activation temperature at 800 degrees C and activation time of 1.5 h. The adsorption behavior of p-nitroaniline on the activated carbons was investigated by batch sorption experiments. The influences of solution pH value, adsorbent dose and temperature were investigated. The adsorption isotherm and thermodynamic characteristics were also discussed. The Spartina alterniflora activated carbon (SA-AC) has a high surface area of 2825 m2 x g(-1) and a micropore volume of 1.192 cm3 x g(-1). The BET surface area and micropore volume of the cotton stalk activated carbon (CS-AC) are 2135 m2 x g(-1) and 1.011 cm3 x g(-1), respectively. The sorption experiments show that both the activated carbons have high sorption capacity for p-nitroaniline. The Langmuir maximum sorption amount was found to be 719 mg x g(-1) for SA-AC and 716 mg x g(-1) for CS-AC, respectively. The sorption was found to depend on solution pH, adsorbent dose, and temperature. The optimum pH for the removal of p-nitroaniline was found to be 7.0. The Freundlich model and Redlich-Peterson model can describe the experimental data effectively. The negative changes in free energy (delta G0) and enthalpy (delta H0) indicate that the sorption is a spontaneous and exothermic procedure. The negative values of the adsorption entropy delta S0 indicate that the mobility of p-nitroaniline on the carbon surface becomes more restricted as compared with that of those in solution.

Lp-mixed affine surface area

Science.gov (United States)

Wang, Weidong; Leng, Gangsong

2007-11-01

According to the three notions of mixed affine surface area, Lp-affine surface area and Lp-mixed affine surface area proposed by Lutwak, in this article, we give the concept of ith Lp-mixed affine surface area such that the first and second notions of Lutwak are its special cases. Further, some Lutwak's results are extended associated with this concept. Besides, applying this concept, we establish an inequality for the volumes and dual quermassintegrals of a class of star bodies.

R7T7 nuclear waste glass behavior in moist clay: role of the clay mass/glass surface area ratio

International Nuclear Information System (INIS)

Godon, N.; Vernaz, E.

1989-01-01

R7T7 glass alteration was investigated in the presence of various moist clays. In contact with smectite 4a, selected in France as a potential engineered barrier material, the glass was significantly corroded: after 6 months the glass corrosion rate was practically the same as the initial alteration rate in double-distilled water. Substantially lower alteration was observed in contact with bentonite 6 activated by sodium carbonate. Smectite 4a consumes silicon released by glass corrosion, and thus retards the rise to high silicon concentrations in solution at which the glass corrosion rate diminishes. Glass can therefore in some cases be altered as much in moist clay as in water with high renewal rates. Other experiments with smaller quantities of smectite 4a showed that the phenomenon becomes less important in time: its duration is proportional to the ratio between the clay mass (C) and the glass surface area (SA). Comparing the results of studies at different C/SA ratios indicates that low glass corrosion rates are obtained more slowly at higher C/SA ratios. Tests with 239 Pu-doped R7T7 glass also showed that the radionuclide retention factor in the alteration film at the glass surface is only 6, compared with a factor of nearly 50 in double-distilled water

Nanoparticles in natural systems I: The effective reactive surface area of the natural oxide fraction in field samples

Science.gov (United States)

Hiemstra, Tjisse; Antelo, Juan; Rahnemaie, Rasoul; van Riemsdijk, Willem H.

2010-01-01

Information on the particle size and reactive surface area of natural samples is essential for the application of surface complexation models (SCM) to predict bioavailability, toxicity, and transport of elements in the natural environment. In addition, this information will be of great help to enlighten views on the formation, stability, and structure of nanoparticle associations of natural organic matter (NOM) and natural oxide particles. Phosphate is proposed as a natively present probe ion to derive the effective reactive surface area of natural samples. In the suggested method, natural samples are equilibrated (⩾10 days) with 0.5 M NaHCO 3 (pH = 8.5) at various solid-solution ratios. This matrix fixes the pH and ionic strength, suppresses the influence of Ca 2+ and Mg 2+ ions by precipitation these in solid carbonates, and removes NOM due to the addition of activated carbon in excess, collectively leading to the dominance of the PO 4-CO 3 interaction in the system. The data have been interpreted with the charge distribution (CD) model, calibrated for goethite, and the analysis results in an effective reactive surface area (SA) and a reversibly bound phosphate loading Γ for a series of top soils. The oxidic SA varies between about 3-30 m 2/g sample for a large series of representative agricultural top soils. Scaling of our data to the total iron and aluminum oxide content (dithionite-citrate-bicarbonate extractable), results in the specific surface area between about 200-1200 m 2/g oxide for most soils, i.e. the oxide particles are nano-sized with an equivalent diameter in the order of ˜1-10 nm if considered as non-porous spheres. For the top soils, the effective surface area and the soil organic carbon fraction are strongly correlated. The oxide particles are embedded in a matrix of organic carbon (OC), equivalent to ˜1.4 ± 0.2 mg OC/m 2 oxide for many soils of the collection, forming a NOM-mineral nanoparticle association with an average NOM volume

Suppression or knockout of SaF/SaM overcomes the Sa-mediated hybrid male sterility in rice

Institute of Scientific and Technical Information of China (English)

Yongyao Xie; Baixiao Niu; Yunming Long; Gousi Li; Jintao Tang; Yaling Zhang; Ding Ren; Yao-Guang Liu; Letian Chen

2017-01-01

Hybrids between the indica and japonica subspecies of rice (Oryza sativa) are usually sterile, which hinders utilization of heterosis in the inter-subspecific hybrid breeding. The complex locus Sa comprises two adjacently located genes, SaF and SaM, which interact to cause abortion of pollen grains carrying the japonica allele in japonica-indica hybrids. Here we showed that silencing of SaF or SaM by RNA interference restored male fertility in indica-japonica hybrids with heterozygous Sa. We further used clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9-based genome editing to knockout the SaF and SaM alleles, respectively, of an indica rice line to create hybrid-compatible lines. The resultant artificial neutral alleles did not affect pollen viability and other agricultural traits, but did break down the reproductive barrier in the hybrids. We found that some rice lines have natural neutral allele Sa-n, which was compatible with the typical japonica or indica Sa alleles in hybrids. Our results demonstrate that SaF and SaM are required for hybrid male sterility, but are not essential for pollen development. This study provides effective approaches for the generation of hybrid-compatible lines by knocking out the Sa locus or using the natural Sa-n allele to overcome hybrid male sterility in rice breeding.

Suppression or knockout of SaF/SaM overcomes the Sa-mediated hybrid male sterility in rice.

Science.gov (United States)

Xie, Yongyao; Niu, Baixiao; Long, Yunming; Li, Gousi; Tang, Jintao; Zhang, Yaling; Ren, Ding; Liu, Yao-Guang; Chen, Letian

2017-09-01

Hybrids between the indica and japonica subspecies of rice (Oryza sativa) are usually sterile, which hinders utilization of heterosis in the inter-subspecific hybrid breeding. The complex locus Sa comprises two adjacently located genes, SaF and SaM, which interact to cause abortion of pollen grains carrying the japonica allele in japonica-indica hybrids. Here we showed that silencing of SaF or SaM by RNA interference restored male fertility in indica-japonica hybrids with heterozygous Sa. We further used clustered regularly interspaced short palindromic repeats (CRISPR)/Cas9-based genome editing to knockout the SaF and SaM alleles, respectively, of an indica rice line to create hybrid-compatible lines. The resultant artificial neutral alleles did not affect pollen viability and other agricultural traits, but did break down the reproductive barrier in the hybrids. We found that some rice lines have natural neutral allele Sa-n, which was compatible with the typical japonica or indica Sa alleles in hybrids. Our results demonstrate that SaF and SaM are required for hybrid male sterility, but are not essential for pollen development. This study provides effective approaches for the generation of hybrid-compatible lines by knocking out the Sa locus or using the natural Sa-n allele to overcome hybrid male sterility in rice breeding. © 2017 The Authors. Bioelectromagnetics published by Wiley Periodicals, Inc. © 2017 Institute of Botany, Chinese Academy of Sciences.

Visão de profissionais e estudantes da área de saúde sobre a interface saúde e meio ambiente View of health area professionals on the interface between health and the environment

Directory of Open Access Journals (Sweden)

Silviamar Camponogara

2013-04-01

Full Text Available Este artigo apresenta a visão de profissionais e estudantes da área da saúde sobre a interface saúde e meio ambiente. Estudo de abordagem qualitativa, descritivo, desenvolvidos com diferentes atores sociais que integram o processo de formação profissional e laboral da área da saúde em um município do Rio Grande do Sul. Os dados foram coletados por meio de entrevista semiestruturada com questões norteadoras sobre o objeto de estudo, feita com trabalhadores hospitalares, enfermeiros, docentes, acadêmicos da área da saúde e agentes comunitários de saúde. Cada subprojeto foi analisado individualmente, com base no referencial sobre análise de conteúdo. Os resultados evidenciam que os sujeitos possuem visões dicotômicas sobre meio ambiente e reconhecem os efeitos prejudiciais da atual crise ambiental, alegando que o ser humano é o principal causador. Os sujeitos do estudo entendem que há estreita interface entre saúde e meio ambiente, sendo as populações menos privilegiadas economicamente as mais afetadas pelos danos ambientais. Conclui-se que o aprofundamento do debate sobre o tema no processo de formação e prática profissional em saúde é fundamental no sentido de se buscar a efetiva responsabilidade socioambiental por parte dos atores sociais atuantes no setor.This article presents the view health area professionals and students have concerning the interface between health and the environment. It is a qualitative, descriptive study undertaken with different social players that are part of the vocational training process in the health care area in a municipality in Rio Grande do Sul, Brazil. The data were collected through a semistructured interview comprising gui-ding questions on the study subject and carried out among hospital workers, nurses, health care professors and students, and community health agents. Each subproject was analyzed individually based on the content analysis framework. The results show that the

Determination of retinal surface area.

Science.gov (United States)

Nagra, Manbir; Gilmartin, Bernard; Thai, Ngoc Jade; Logan, Nicola S

2017-09-01

Previous attempts at determining retinal surface area and surface area of the whole eye have been based upon mathematical calculations derived from retinal photographs, schematic eyes and retinal biopsies of donor eyes. 3-dimensional (3-D) ocular magnetic resonance imaging (MRI) allows a more direct measurement, it can be used to image the eye in vivo, and there is no risk of tissue shrinkage. The primary purpose of this study is to compare, using T2-weighted 3D MRI, retinal surface areas for superior-temporal (ST), inferior-temporal (IT), superior-nasal (SN) and inferior-nasal (IN) retinal quadrants. An ancillary aim is to examine whether inter-quadrant variations in area are concordant with reported inter-quadrant patterns of susceptibility to retinal breaks associated with posterior vitreous detachment (PVD). Seventy-three adult participants presenting without retinal pathology (mean age 26.25 ± 6.06 years) were scanned using a Siemens 3-Tesla MRI scanner to provide T2-weighted MR images that demarcate fluid-filled internal structures for the whole eye and provide high-contrast delineation of the vitreous-retina interface. Integrated MRI software generated total internal ocular surface area (TSA). The second nodal point was used to demarcate the origin of the peripheral retina in order to calculate total retinal surface area (RSA) and quadrant retinal surface areas (QRSA) for ST, IT, SN, and IN quadrants. Mean spherical error (MSE) was -2.50 ± 4.03D and mean axial length (AL) 24.51 ± 1.57 mm. Mean TSA and RSA for the RE were 2058 ± 189 and 1363 ± 160 mm 2 , respectively. Repeated measures anova for QRSA data indicated a significant difference within-quadrants (P area/mm increase in AL. Although the differences between QRSAs are relatively small, there was evidence of concordance with reported inter-quadrant patterns of susceptibility to retinal breaks associated with PVD. The data allow AL to be converted to QRSAs, which will assist further

Surface moisture estimation in urban areas

Science.gov (United States)

Jiang, Yitong

Surface moisture is an important parameter because it modifies urban microclimate and surface layer meteorology. The primary objectives of this paper are: 1) to analyze the impact of surface roughness from buildings on surface moisture in urban areas; and 2) to quantify the impact of surface roughness resulting from urban trees on surface moisture. To achieve the objectives, two hypotheses were tested: 1) the distribution of surface moisture is associated with the structural complexity of buildings in urban areas; and 2) The distribution and change of surface moisture is associated with the distribution and vigor of urban trees. The study area is Indianapolis, Indiana, USA. In the part of the morphology of urban trees, Warren Township was selected due to the limitation of tree inventory data. To test the hypotheses, the research design was made to extract the aerodynamic parameters, such as frontal areas, roughness length and displacement height of buildings and trees from Terrestrial and Airborne LiDAR data, then to input the aerodynamic parameters into the urban surface energy balance model. The methodology was developed for comparing the impact of aerodynamic parameters from LiDAR data with the parameters that were derived empirically from land use and land cover data. The analytical procedures are discussed below: 1) to capture the spatial and temporal variation of surface moisture, daily and hourly Land Surface Temperature (LST) were downscaled from 4 km to 1 km, and 960 m to 30 m, respectively, by regression between LST and various components that impact LST; 2) to estimate surface moisture, namely soil moisture and evapotranspiration (ET), land surfaces were classified into soil, vegetation, and impervious surfaces, using Linear Spectral Mixture Analysis (LSMA); 3) aerodynamic parameters of buildings and trees were extracted from Airborne and Terrestrial LiDAR data; 4) the Temperature-Vegetation-Index (TVX) method, and the Two-Source-Energy-Balance (TSEB

DeSa News. No. 2, February 2006

International Nuclear Information System (INIS)

2006-02-01

The international project on Evaluation and Demonstration of Safety during Decommissioning of Nuclear Facilities (DeSa Project) was launched in November 2004 with the aim of developing a harmonized methodology for the safety assessment of decommissioning activities, providing recommendations on a systematic regulatory review procedure and applying the graded approach in the development and review of safety assessments for decommissioning. Significant work has been accomplished since the first project meeting (1-5 November 2004) in the following main areas: a. Development of a draft Safety Report on Safety Assessment Methodologies for Decommissioning of Nuclear Facilities; b. Development of first draft documents on the Regulatory Review and Application of the Graded Approach to Safety Assessments for Decommissioning; c. Six nuclear facilities volunteered by Member States as candidates for the preparation of a selected number of test cases during Phase 2 of the DeSa Project; d. Presentation of the Project at three international events in Canada and USA; e. Promotion of the Project through the first DeSa newsletter and the Project website (http://wwwns.iaea.org/tech-areas/waste-safety/desa). The second DeSa Project meeting (17-21 October 2005) attracted forty-two experts from twenty-six countries with the aim to: - Review progress on the five DeSa Project working groups (WGs) [Assessment Framework and System Description, Hazard Analysis, Analysis of Results and Confidence Building, Regulatory Review and Graded Approach] activities; - Review the draft Safety Report on Safety Assessment Methodologies for Decommissioning of Nuclear Facilities, as revised by the Coordinating Group of the DeSa Project in June 2005; - Review progress and further develop recommendations on the regulatory review of safety assessments for decommissioning and the application of a graded approach to be used during the development and review of such assessments; - Develop the DeSa work plan

The Soil Characteristic Curve at Low Water Contents: Relations to Specific Surface Area and Texture

DEFF Research Database (Denmark)

Resurreccion, Augustus; Møldrup, Per; Schjønning, Per

Accurate description of the soil-water retention curve (SWRC) at low water contents is important for simulating water dynamics, plant-water relations, and microbial processes in surface soil. Soil-water retention at soil-water matric potential of less than -10 MPa, where adsorptive forces dominate...... that measurements by traditional pressure plate apparatus generally overestimated water contents at -1.5 MPa (plant wilting point). The 41 soils were classified into four textural classes based on the so-called Dexter index n (= CL/OC), and the Tuller-Or (TO) general scaling model describing the water film...... thickness at a given soil-water matric potential ( 10, the estimated SA from the dry soil-water retention was in good agreement with the SA measured using ethylene glycol monoethyl ether (SA_EGME). A strong relationship between the ratio...

Wetted surface area of recreational boats

NARCIS (Netherlands)

Bakker J; van Vlaardingen PLA; ICH; VSP

2018-01-01

The wetted surface area of recreational craft is often treated with special paint that prevents growth of algae and other organisms. The active substances in this paint (antifouling) are also emitted into the water. The extent of this emission is among others determined by the treated surface area.

L p -Dual geominimal surface area

Directory of Open Access Journals (Sweden)

Weidong Wang

2011-01-01

Full Text Available Abstract Lutwak proposed the notion of Lp -geominimal surface area according to the Lp -mixed volume. In this article, associated with the Lp -dual mixed volume, we introduce the Lp -dual geominimal surface area and prove some inequalities for this notion. 2000 Mathematics Subject Classification: 52A20 52A40.

Fast method to compute scattering by a buried object under a randomly rough surface: PILE combined with FB-SA.

Science.gov (United States)

Bourlier, Christophe; Kubické, Gildas; Déchamps, Nicolas

2008-04-01

A fast, exact numerical method based on the method of moments (MM) is developed to calculate the scattering from an object below a randomly rough surface. Déchamps et al. [J. Opt. Soc. Am. A23, 359 (2006)] have recently developed the PILE (propagation-inside-layer expansion) method for a stack of two one-dimensional rough interfaces separating homogeneous media. From the inversion of the impedance matrix by block (in which two impedance matrices of each interface and two coupling matrices are involved), this method allows one to calculate separately and exactly the multiple-scattering contributions inside the layer in which the inverses of the impedance matrices of each interface are involved. Our purpose here is to apply this method for an object below a rough surface. In addition, to invert a matrix of large size, the forward-backward spectral acceleration (FB-SA) approach of complexity O(N) (N is the number of unknowns on the interface) proposed by Chou and Johnson [Radio Sci.33, 1277 (1998)] is applied. The new method, PILE combined with FB-SA, is tested on perfectly conducting circular and elliptic cylinders located below a dielectric rough interface obeying a Gaussian process with Gaussian and exponential height autocorrelation functions.

Contact area measurements on structured surfaces

DEFF Research Database (Denmark)

Kücükyildiz, Ömer Can; Jensen, Sebastian Hoppe Nesgaard; De Chiffre, Leonardo

In connection with the use of brass specimens featuring structured surfaces in a tribology test, an algorithm was developed for automatic measurement of the contact area by optical means.......In connection with the use of brass specimens featuring structured surfaces in a tribology test, an algorithm was developed for automatic measurement of the contact area by optical means....

Hand burns surface area: A rule of thumb.

Science.gov (United States)

Dargan, Dallan; Mandal, Anirban; Shokrollahi, Kayvan

2018-03-11

Rapid estimation of acute hand burns is important for communication, standardisation of assessment, rehabilitation and research. Use of an individual's own thumbprint area as a fraction of their total hand surface area was evaluated to assess potential utility in hand burn evaluation. Ten health professionals used an ink-covered dominant thumb pulp to cover the surfaces of their own non-dominant hand using the contralateral thumb. Thumbprints were assessed on the web spaces, sides of digits and dorsum and palm beyond the distal wrist crease. Hand surface area was estimated using the Banerjee and Sen method, and thumbprint ellipse area calculated to assess correlation. Mean estimated total hand surface area was 390.0cm 2 ±SD 51.5 (328.3-469.0), mean thumbprint ellipse area was 5.5cm 2 ±SD 1.3 (3.7-8.4), and mean estimated print number was 73.5±SD 11.0 (range 53.1-87.8, 95% CI 6.8). The mean observed number of thumbprints on one hand was 80.1±SD 5.9 (range 70.0-88.0, 95% CI 3.7), χ 2 =0.009. The combined mean of digital prints was 42, comprising a mean of two prints each on volar, dorsal, radial and ulnar digit surfaces, except volar middle and ring (3 prints each). Palmar prints were 15 (11-19), dorsal 15 (11-19), ulnar palm border 3, first web space 2, and second, third and fourth web spaces one each. Using the surface of the palm alone, excluding digits, as 0.5% of total body surface area, the area of one thumbprint was approximated as 1/30th of 1%. We have demonstrated how thumbprint area serves as a simple method for evaluating hand burn surface area. Copyright © 2018 Elsevier Ltd and ISBI. All rights reserved.

The influence of MIR137 on white matter fractional anisotropy and cortical surface area in individuals with familial risk for psychosis.

Science.gov (United States)

Vogel, Bob O; Lett, Tristram A; Erk, Susanne; Mohnke, Sebastian; Wackerhagen, Carolin; Brandl, Eva J; Romanczuk-Seiferth, Nina; Otto, Kristina; Schweiger, Janina I; Tost, Heike; Nöthen, Markus M; Rietschel, Marcella; Degenhardt, Franziska; Witt, Stephanie H; Meyer-Lindenberg, Andreas; Heinz, Andreas; Walter, Henrik

2018-05-01

The rs1625579 variant near the microRNA-137 (MIR137) gene is one of the best-supported schizophrenia variants in genome-wide association studies (GWAS), and microRNA-137 functionally regulates other GWAS identified schizophrenia risk variants. Schizophrenia patients with the MIR137 rs1625579 risk genotype (homozygous for the schizophrenia risk variant) also have aberrant brain structure. It is unclear if the effect of MIR137 among schizophrenia patients is due to potential epistasis with genetic risk for schizophrenia or other factors of the disorder. Here, we investigated the effect of MIR137 genotype on white matter fractional anisotropy (FA), cortical thickness (CT), and surface area (SA) in a sample comprising healthy control subjects, and individuals with familial risk for psychosis (first-degree relatives of patients with schizophrenia or bipolar disorder; N=426). In voxel-wise analyses of FA, we observed a significant genotype-by-group interaction (P FWE <0.05). The familial risk group with risk genotype had lower FA (P FWE <0.05), but there was no genetic association in controls. In vertex-wise analyses of SA, we also observed a significant genotype-by-group interaction (P FWE <0.05). Relatives with MIR137 risk genotype had lower SA, however the risk genotype was associated with higher SA in the controls (all P FWE <0.05). These results show that MIR137 risk genotype is associated with lower FA in psychosis relatives that is similar to previous imaging-genetics findings in patients with schizophrenia. Furthermore, MIR137 genotype may also be a risk factor in a subclinical population with wide reductions in white matter FA and cortical SA. Copyright © 2017 Elsevier B.V. All rights reserved.

The endophytic bacterium, Sphingomonas SaMR12, improves the potential for zinc phytoremediation by its host, Sedum alfredii.

Directory of Open Access Journals (Sweden)

Bao Chen

Full Text Available The endophytic bacterium, Sphingomonas SaMR12, isolated from Sedum alfredii Hance, appears to increase plant biomass and zinc-extraction from contaminated soil; however, the mechanism by which this occurs is not clear. Here, the ability of SaMR12 to promote zinc extraction and its effects on root morphology and exudation were examined in hydroponics. Zinc treatment increased shoot biomass by 30 to 45%, and by a further 10 to 19% when combined with SaMR12 inoculation. Zinc treatment also increased zinc accumulation modestly and this too was enhanced with SaMR12. Both biomass and zinc levels increased in a dose-dependent manner with significant effects seen at 50 µM zinc and apparent saturation at 500 µM. Zinc and the endophyte also increased levels of auxin but not at 50 µM and zinc increased levels of superoxide and hydrogen peroxide but mainly at 500 µM. As for root morphology, SaMR12 increased root branching, the number of root tips, and surface area. Zinc and SaMR12 also increased the exudation of oxalic acid. For most assays the effects of the endophyte and zinc were additive, with the notable exception of SaMR12 strongly reducing the production of reactive oxygen species at 500 µM zinc. Taken together, these results suggest that the promotion of growth and zinc uptake by exposure to zinc and to SaMR12 are independent of reactive oxygen and do not involve increases in auxin.

Estimating surface area in early hominins.

Directory of Open Access Journals (Sweden)

Alan Cross

Full Text Available Height and weight-based methods of estimating surface area have played an important role in the development of the current consensus regarding the role of thermoregulation in human evolution. However, such methods may not be reliable when applied to early hominins because their limb proportions differ markedly from those of humans. Here, we report a study in which this possibility was evaluated by comparing surface area estimates generated with the best-known height and weight-based method to estimates generated with a method that is sensitive to proportional differences. We found that the two methods yield indistinguishable estimates when applied to taxa whose limb proportions are similar to those of humans, but significantly different results when applied to taxa whose proportions differ from those of humans. We also found that the discrepancy between the estimates generated by the two methods is almost entirely attributable to inter-taxa differences in limb proportions. One corollary of these findings is that we need to reassess hypotheses about the role of thermoregulation in human evolution that have been developed with the aid of height and weight-based methods of estimating body surface area. Another is that we need to use other methods in future work on fossil hominin body surface areas.

A Simple Proof of Cauchy's Surface Area Formula

OpenAIRE

Tsukerman, Emmanuel; Veomett, Ellen

2016-01-01

We give a short and simple proof of Cauchy's surface area formula, which states that the average area of a projection of a convex body is equal to its surface area up to a multiplicative constant in the dimension.

Quantifying object and material surface areas in residences

Energy Technology Data Exchange (ETDEWEB)

Hodgson, Alfred T.; Ming, Katherine Y.; Singer, Brett C.

2005-01-05

The dynamic behavior of volatile organic compounds (VOCs) in indoor environments depends, in part, on sorptive interactions between VOCs in the gas phase and material surfaces. Since information on the types and quantities of interior material surfaces is not generally available, this pilot-scale study was conducted in occupied residences to develop and demonstrate a method for quantifying surface areas of objects and materials in rooms. Access to 33 rooms in nine residences consisting of bathrooms, bedroom/offices and common areas was solicited from among research group members living in the East San Francisco Bay Area. A systematic approach was implemented for measuring rooms and objects from 300 cm{sup 2} and larger. The ventilated air volumes of the rooms were estimated and surface area-to-volume ratios were calculated for objects and materials, each segregated into 20 or more categories. Total surface area-to-volume ratios also were determined for each room. The bathrooms had the highest total surface area-to-volume ratios. Bedrooms generally had higher ratios than common areas consisting of kitchens, living/dining rooms and transitional rooms. Total surface area-to-volume ratios for the 12 bedrooms ranged between 2.3 and 4.7 m{sup 2} m{sup -3}. The importance of individual objects and materials with respect to sorption will depend upon the sorption coefficients for the various VOC/materials combinations. When combined, the highly permeable material categories, which may contribute to significant interactions, had a median ratio of about 0.5 m{sup 2} m{sup -3} for all three types of rooms.

Surface roughness characterization of cast components using 3D optical methods

DEFF Research Database (Denmark)

Nwaogu, Ugochukwu Chibuzoh; Tiedje, Niels Skat; Hansen, Hans Nørgaard

scanning probe image processor (SPIP) software and the results of the surface roughness parameters obtained were subjected to statistical analyses. The bearing area ratio was introduced and applied to the surface roughness analysis. From the results, the surface quality of the standard comparators...... is successfully characterised and it was established that the areal parameters are more informative for sand cast components. The roughness values of the standard visual comparators can serve as a control for the cast components and for order specifications in the foundry industry. A series of iron castings were...... made in green sand moulds and the surface roughness parameter (Sa) values were compared with those of the standards. Sa parameter suffices for the evaluation of casting surface texture. The S series comparators showed a better description of the surface of castings after shot blasting than the A series...

Lingon sa Iskolarsyip sa Dulaan (1948-2007 Looking Back on Theater Scholarship (1948-2007

Directory of Open Access Journals (Sweden)

Apolonio B. Chua

2012-12-01

Full Text Available From 1948 to 2007, the academic community produced about a hundred titles of theses and dissertations on drama and theater, or made use of data from drama and theater for larger spheres of studies. The current article looked into identifying trends and points of emphasis, as the researches and studies progressed through roughly half a century of research production in the academic setting. Inductive in approach and tentative and exploratory in its analysis, the study identified four trends and points of emphasis in research production. In the fifties and sixties, the emphasis was more on studying the play text or drama; studies veered towards a literary reading and orientation. Eventually, this trend gave way to studying the larger phenomenon of mounting, and the mise en scéne and the spectator became additional units of concern for research. Studies began to have sections on props, costumes, and staging techniques. In the eighties, a larger concern for looking at theater as social production followed. Participant observation, field work and ethnography gave equal emphasis on the social context of theater. Marxism and other perspectives from the social sciences framed theater studies then; correlations between theater and society became useful. Towards the last decade of the century, theater studies aimed at a more conceptual approach, emphasizing core concepts like panata and other related or equivalent terms, elevating and defining the study of theater as a study of culture itself. Gamit ang mahigit sa sandaang tesis at disertasyon hinggil sa dula at dulaan o sinasangkot ang mga ito na lumabas sa akademya mula 1948 hanggang 2007, kapwa sa Unibersidad ng Pilipinas at sa iba pa, nilayon ng “Lingon sa Iskolarsyip sa Dulaan (1948-2007” na pulsuhan ang pangkalahatang daloy, tutok, tunguhin o kalakaran sa pagdadala ng mga pag-aaral. Panimula at exploratory sa inductive nitong lapat, nakatukoy ang pag-aaral ng apat na sapit o tutok sa daloy ng

Addendum to the Closure Report for Corrective Action Unit 484: Surface Debris, Waste Sites, and Burn Area, Tonopah Test Range, Nevada (Revision 0)

International Nuclear Information System (INIS)

Burmeister, Mark

2011-01-01

Corrective Action Unit (CAU) 484 Streamlined Approach for Environmental Restoration (SAFER) activities called for the identification and remediation of surface hot spot depleted uranium (DU) with some excavation to determine the vertical extent of contamination (NNSA/NSO, 2004). During the CAU 484 SAFER investigation (conducted November 2003 through August 2007), approximately 50 locations containing DU were identified on Antelope Lake. All but four locations (CA-1, SA-5-9, SA-12-15, and SA-4) were remediated. Figure 1-1 shows locations of the four use restriction (UR) sites. The four locations were determined to have failed the SAFER conceptual site model assumption of a small volume hot spot. Two of the locations (CA-1 and SA-5-9) were excavated to depths of 3.5 to 7 feet (ft) below ground surface (bgs), and a third location (SA-12-15) with a footprint of 30 by 60 ft was excavated to a depth of 0.5 ft. At the fourth site (SA-4), the discovery of unexploded ordnance (UXO) halted the excavation due to potential safety concerns. Remediation activities on Antelope Lake resulted in the removal of approximately 246 cubic yards (yd3) of DU-impacted soil from the four UR sites; however, Kiwi surveys confirmed that residual DU contamination remained at each of the four sites. (The Kiwi was a Remote Sensing Laboratory [RSL] vehicle equipped with a data-acquisition system and four sodium iodide gamma detectors. Surveys were conducted with the vehicle moving at a rate of approximately 10 miles per hour with the gamma detectors positioned 14 to 28 inches [in.] above the ground surface [NNSA/NSO, 2004]).

Quantification of lung surface area using computed tomography

Directory of Open Access Journals (Sweden)

Xing Li

2010-10-01

Full Text Available Abstract Objective To refine the CT prediction of emphysema by comparing histology and CT for specific regions of lung. To incorporate both regional lung density measured by CT and cluster analysis of low attenuation areas for comparison with histological measurement of surface area per unit lung volume. Methods The histological surface area per unit lung volume was estimated for 140 samples taken from resected lung specimens of fourteen subjects. The region of the lung sampled for histology was located on the pre-operative CT scan; the regional CT median lung density and emphysematous lesion size were calculated using the X-ray attenuation values and a low attenuation cluster analysis. Linear mixed models were used to examine the relationships between histological surface area per unit lung volume and CT measures. Results The median CT lung density, low attenuation cluster analysis, and the combination of both were important predictors of surface area per unit lung volume measured by histology (p Conclusion Combining CT measures of lung density and emphysematous lesion size provides a more accurate estimate of lung surface area per unit lung volume than either measure alone.

G‐LoSA: An efficient computational tool for local structure‐centric biological studies and drug design

Science.gov (United States)

2016-01-01

Abstract Molecular recognition by protein mostly occurs in a local region on the protein surface. Thus, an efficient computational method for accurate characterization of protein local structural conservation is necessary to better understand biology and drug design. We present a novel local structure alignment tool, G‐LoSA. G‐LoSA aligns protein local structures in a sequence order independent way and provides a GA‐score, a chemical feature‐based and size‐independent structure similarity score. Our benchmark validation shows the robust performance of G‐LoSA to the local structures of diverse sizes and characteristics, demonstrating its universal applicability to local structure‐centric comparative biology studies. In particular, G‐LoSA is highly effective in detecting conserved local regions on the entire surface of a given protein. In addition, the applications of G‐LoSA to identifying template ligands and predicting ligand and protein binding sites illustrate its strong potential for computer‐aided drug design. We hope that G‐LoSA can be a useful computational method for exploring interesting biological problems through large‐scale comparison of protein local structures and facilitating drug discovery research and development. G‐LoSA is freely available to academic users at http://im.compbio.ku.edu/GLoSA/. PMID:26813336

G-LoSA: An efficient computational tool for local structure-centric biological studies and drug design.

Science.gov (United States)

Lee, Hui Sun; Im, Wonpil

2016-04-01

Molecular recognition by protein mostly occurs in a local region on the protein surface. Thus, an efficient computational method for accurate characterization of protein local structural conservation is necessary to better understand biology and drug design. We present a novel local structure alignment tool, G-LoSA. G-LoSA aligns protein local structures in a sequence order independent way and provides a GA-score, a chemical feature-based and size-independent structure similarity score. Our benchmark validation shows the robust performance of G-LoSA to the local structures of diverse sizes and characteristics, demonstrating its universal applicability to local structure-centric comparative biology studies. In particular, G-LoSA is highly effective in detecting conserved local regions on the entire surface of a given protein. In addition, the applications of G-LoSA to identifying template ligands and predicting ligand and protein binding sites illustrate its strong potential for computer-aided drug design. We hope that G-LoSA can be a useful computational method for exploring interesting biological problems through large-scale comparison of protein local structures and facilitating drug discovery research and development. G-LoSA is freely available to academic users at http://im.compbio.ku.edu/GLoSA/. © 2016 The Protein Society.

Saúde Ambiental: uma Análise dos Resultados das Conferências Nacionais de Meio Ambiente, Saúde e Saúde Ambiental

Directory of Open Access Journals (Sweden)

Maria Beatriz Maury de Carvalho

2010-08-01

Full Text Available A representação nas políticas públicas do conceito de saúde ambiental, como expressão do equilíbrio da rede de conexões entre a sociedade humana e a natureza é discutida neste trabalho, no intuito de demonstrar o status quo da saúde ambiental nas políticas públicas no país. Primeiro foi traçado o histórico da “ambientalização na saúde”, do conceito de saúde ambiental e da institucionalização das políticas ambientais e de saúde ambiental no âmbito dos Ministérios do Meio Ambiente e da Saúde. As interações entre as políticas de Saúde e de Meio Ambiente para a efetivação de uma Política Nacional de Saúde Ambiental e as intersecções dos resultados das Conferências Nacionais de Saúde, Meio Ambiente e Saúde Ambiental foram analisadas; concluindo- se com os avanços conseguidos pelos dois setores, os desafios para a articulação intersetorial e a participação social para a construção de políticas públicas de saúde ambiental.

Kakaibang Halimuyak: Iba't Ibang Imahe ng Pangangapital sa Balintawak

Directory of Open Access Journals (Sweden)

Mariah Amour C. Miranda

2015-06-01

Full Text Available Ginagalugad ng sanaysay na ito ang isang pangunahing lugar na nadaraanan mula Norte patungong Maynila—ang Balintawak. Nagsisilbing manibela ng pagsusuri ang kontemporaneong pananaw sa lunan bilang pugad ng mga anyong may magkakasalungat na kahulugan. Binibigyang-pansin ng sanaysay ang iba't ibang imahe ng pagbebenta na matatagpuan sa Balintawak: ang billboard ng kumpanyang Bench na siyang pinakamalaki, ang mismong palengke, at ang mga lakong paninda sa tabing-kalsada. Sa pamamagitan nito, maipapakita ng sanaysay kung paano madadalumat ang Balintawak bilang isang panlipunang texto na sumasalamin sa mga magkakaibang pangangapital sa naturang lunan. This essay explores the space of Balintawak—a focal point of urban travel from northern Luzon to Manila. Using the contemporary view on space as a site of structures with contradictory meanings, the study seeks to understand how various images of market activities in Balintawak create meaningful representations. These images include the gigantic billboard of Bench, the central market itself, and flea markets in the area. The essay shows how Balintawak as a social text serves as a trading center of different forms of capital.

Surface area considerations for corroding N reactor fuel

International Nuclear Information System (INIS)

Johnson, A.B. Jr.; Pitner, A.L.

1996-06-01

The N Reactor fuel is corroding at sites where the Zircaloy cladding was damaged when the fuel was discharged from the reactor. Corroding areas are clearly visible on the fuel stored in open cans in the K East Basin. There is a need to estimate the area of the corroding uranium to analyze aspects of fuel behavior as it is transitioned. from current wet storage to dry storage. In this report, the factors that contribute to open-quotes trueclose quotes surface area are analyzed in terms of what is currently known about the N Reactor fuel. Using observations from a visual examinations of the fuel in the K East wet storage facility, a value for the corroding geometric area is estimated. Based on observations of corroding uranium and surface roughness values for other metals, a surface roughness factor is also estimated and applied to the corroding K East fuel to provide an estimated open-quotes trueclose quotes surface area. While the estimated area may be modified as additional data become available from fuel characterization studies, the estimate provides a basis to assess effects of exposed uranium metal surfaces on fuel behavior in operations involved in transitioning from wet to dry storage, during shipment and staging, conditioning, and dry interim storage

76 FR 13063 - Airworthiness Directives; EUROCOPTER FRANCE Model SA330F, SA330G, and SA330J Helicopters

Science.gov (United States)

2011-03-10

... Airworthiness Directives; EUROCOPTER FRANCE Model SA330F, SA330G, and SA330J Helicopters AGENCY: Federal... system and the pedals rocking forward. After investigation, it was determined that the Loctite bond on the ``tall pilot'' stop nut was damaged, most likely due to aging of the adhesive. The nut came loose...

AN EXAMPLE IN SURFACE AREA*

Science.gov (United States)

Goffman, Casper

1969-01-01

For length and area, a central fact is that the value of the length of a curve or the area of a surface, as given by the Lebesgue theory, is at least as great as that given by the classical formula, whenever the latter has meaning. This is now found not to be valid in higher dimensions. We give an example of a continuous mapping of the unit cube into itself for which the value given by the formula exceeds the three-dimensional Lebesgue area of the corresponding suface. PMID:16591750

On the specific surface area of nanoporous materials

NARCIS (Netherlands)

Detsi, E.; De Jong, E.; Zinchenko, A.; Vukovic, Z.; Vukovic, I.; Punzhin, S.; Loos, K.; ten Brinke, G.; De Raedt, H. A.; Onck, P. R.; De Hosson, J. T. M.

2011-01-01

A proper quantification of the specific surface area of nanoporous materials is necessary for a better understanding of the properties that are affected by the high surface-area-to-volume ratio of nanoporous metals, nanoporous polymers and nanoporous ceramics. In this paper we derive an analytical

Sampling and sensitivity analyses tools (SaSAT for computational modelling

Directory of Open Access Journals (Sweden)

Wilson David P

2008-02-01

Full Text Available Abstract SaSAT (Sampling and Sensitivity Analysis Tools is a user-friendly software package for applying uncertainty and sensitivity analyses to mathematical and computational models of arbitrary complexity and context. The toolbox is built in Matlab®, a numerical mathematical software package, and utilises algorithms contained in the Matlab® Statistics Toolbox. However, Matlab® is not required to use SaSAT as the software package is provided as an executable file with all the necessary supplementary files. The SaSAT package is also designed to work seamlessly with Microsoft Excel but no functionality is forfeited if that software is not available. A comprehensive suite of tools is provided to enable the following tasks to be easily performed: efficient and equitable sampling of parameter space by various methodologies; calculation of correlation coefficients; regression analysis; factor prioritisation; and graphical output of results, including response surfaces, tornado plots, and scatterplots. Use of SaSAT is exemplified by application to a simple epidemic model. To our knowledge, a number of the methods available in SaSAT for performing sensitivity analyses have not previously been used in epidemiological modelling and their usefulness in this context is demonstrated.

Promoção da saúde, qualidade de vida e iniquidade em saúde: reflexões para a saúde pública.

Directory of Open Access Journals (Sweden)

Aline Rodrigues de ALMEIDA

2016-01-01

Full Text Available A ideia de promover saúde tem se tornado uma energia fundamental no movimento de saúde coletiva, no qual saúde é um fenômeno social e marcado por iniquidades. Este trabalho teve como objetivo compreender as relações entre promoção da saúde e iniquidades de acesso e assistência em saúde, identificandoos entraves para uma prática equânime da saúde pública com ênfase à qualidade de vida. Os diferentes perfis de doença e suas mediações sociais ultrapassam os estudos de variação biológica e incorpora o foco na dimensão social das vulnerabilidades. Para promover saúde no Brasil, é indissociável do enfrentamento de uma realidade de iniquidades históricas de grandes proporções que impõem desafios cotidianos não apenas ao setor de saúde, mas a todos aqueles que constroem políticas públicas. A qualidade de vida depende da satisfação das necessidades básicas de todos os cidadãos, propondo uma gestão baseada na solidariedade social, uma visão holística dos problemas e a redução das iniquidades. A promoção da saúde em um país tão desigual como o Brasil propõe um desafio constante aos atores envolvidos no sistema de saúde. A compreensão das iniquidades em saúde para estabelecer uma assistência holística é um processo difícil, mas extremamente relevante para a saúde pública.

SYSTEMIC ASSESSMENT [SA] AS A TOOL TO ASSESS STUDENT ...

African Journals Online (AJOL)

Temechegn

our studies on Systemic Assessment [SA] [5-8] is an ongoing process of .... schema can be considered as a single element in working memory [9]. This is ... our students from surface learning to deep learning of chemical processes in sodium ...

Varyasyong Leksikal sa mga Dayalektong Mandaya

Directory of Open Access Journals (Sweden)

Dr. Raymund M. Pasion

2014-12-01

Full Text Available Layuning panlahat sa pag-aaral na ito na tuklasin ang varyasyong leksikalsa Wikang Mandaya na matatagpuan sa Probinsyang Davao Oriental. Bilang lunsaran sa paglilikom ng mga datos, ginamit ang mga terminong kultural na pangkabuhayan tulad ng pagsasaka, pangangaso, pangingisda at paghahayupan nanababatay sa Indigenous Knowledge System and Practices (IKSP.Sinikap sagutin sa pagaaral ang suliraning ano-anong varyasyong liksikal ang makikita sa mga terminong kultural na pangkabuhayan ng Mandaya na makikita sa munisipalidad ng Caraga, Manay, Bagangaat Cateel? Disenyong kwalitatibo ginamit.Metodong indehinusat deskriptibo naman ang ginamit mula sa paglilikom hanggang sa pag-aanalisa ng mga datos. Samantalang, ang mga impormante ay pinilisa pamamagitan ng kombinasyong purposive at snow-ball sampling. Natuklasan, na ang wikang Mandaya ay nakitaan ng varyasyong lekisikal ayon sa magkakaiba ang anyo, may pagkakatulad ang anyo, at magkakatulad ang anyo subalit magkakaiba ang bigkas. Gayunpaman, pinaniniwalaang dahil sa paktor na heograpikal, sikolohikal at sosyolohikal na nagaganap sa kanilang kultura ay hindi rin maipagkailang nagyari ang varyasyong leksikal na aspekto nito.

Location of unaccessible implant surface areas during debridement in simulated peri-implantitis therapy

OpenAIRE

Steiger-Ronay, Valerie; Merlini, Andrea; Wiedemeier, Daniel B.; Schmidlin, Patrick R.; Attin, Thomas; Sahrmann, Philipp

2017-01-01

Background An in vitro model for peri-implantitis treatment was used to identify areas that are clinically difficult to clean by analyzing the pattern of residual stain after debridement with commonly employed instruments. Methods Original data from two previous publications, which simulated surgical (SA) and non-surgical (NSA) implant debridement on two different implant systems respectively, were reanalyzed regarding the localization pattern of residual stains after instrumentation. Two bli...

A real-time integrator of storage-area contents for SA 40B or DIDAC 800 analyzers. Use in the digital single-channel mode

International Nuclear Information System (INIS)

Rigaudiere, Roger; Daburon, M.-L.

1976-09-01

An apparatus was developed in order to sum up, during counting, the channel contents from several storage areas of SA 40 B or DIDAC 800 multichannel analyzers. The pulse number stored in the energy bands interesting the operator are known and if necessary subsequent operation can be modified accordingly. Coupled with an autonomous amplitude encoder, this apparatus can be operated in the digital single-channel mode [fr

Physicochemical state of the nanotopographic surface of commercially pure titanium following anodization-hydrothermal treatment reveals significantly improved hydrophilicity and surface energy profiles.

Science.gov (United States)

Takebe, Jun; Ito, Shigeki; Miura, Shingo; Miyata, Kyohei; Ishibashi, Kanji

2012-01-01

A method of coating commercially pure titanium (cpTi) implants with a highly crystalline, thin hydroxyapatite (HA) layer using discharge anodic oxidation followed by hydrothermal treatment (Spark discharged Anodic oxidation treatment ; SA-treated cpTi) has been reported for use in clinical dentistry. We hypothesized that a thin HA layer with high crystallinity and nanostructured anodic titanium oxide film on such SA-treated cpTi implant surfaces might be a crucial function of their surface-specific potential energy. To test this, we analyzed anodic oxide (AO) cpTi and SA-treated cpTi disks by SEM and AFM. Contact angles and surface free energy of each disk surface was measured using FAMAS software. High-magnification SEM and AFM revealed the nanotopographic structure of the anodic titanium oxide film on SA-treated cpTi; however, this was not observed on the AO cpTi surface. The contact angle and surface free energy measurements were also significantly different between AO cpTi and SA-treated cpTi surfaces (Tukey's, P<0.05). These data indicated that the change of physicochemical properties of an anodic titanium oxide film with HA crystals on an SA-treated cpTi surface may play a key role in the phenomenon of osteoconduction during the process of osseointegration. Copyright © 2011 Elsevier B.V. All rights reserved.

Indexing aortic valve area by body surface area increases the prevalence of severe aortic stenosis

DEFF Research Database (Denmark)

Jander, Nikolaus; Gohlke-Bärwolf, Christa; Bahlmann, Edda

2014-01-01

To account for differences in body size in patients with aortic stenosis, aortic valve area (AVA) is divided by body surface area (BSA) to calculate indexed AVA (AVAindex). Cut-off values for severe stenosis are......To account for differences in body size in patients with aortic stenosis, aortic valve area (AVA) is divided by body surface area (BSA) to calculate indexed AVA (AVAindex). Cut-off values for severe stenosis are...

Moisture availability constraints on the leaf area to sapwood area ratio: analysis of measurements on Australian evergreen angiosperm trees

Science.gov (United States)

Togashi, Henrique; Prentice, Colin; Evans, Bradley; Forrester, David; Drake, Paul; Feikema, Paul; Brooksbank, Kim; Eamus, Derek; Taylor, Daniel

2014-05-01

The leaf area to sapwood area ratio (LA:SA) is a key plant trait that links photosynthesis to transpiration. Pipe model theory states that the sapwood cross-sectional area of a stem or branch at any point should scale isometrically with the area of leaves distal to that point. Optimization theory further suggests that LA:SA should decrease towards drier climates. Although acclimation of LA:SA to climate has been reported within species, much less is known about the scaling of this trait with climate among species. We compiled LA:SA measurements from 184 species of Australian evergreen angiosperm trees. The pipe model was broadly confirmed, based on measurements on branches and trunks of trees from one to 27 years old. We found considerable scatter in LA:SA among species. However quantile regression showed strong (0.2SA, suggesting that moisture availability constrains the envelope of minimum and maximum values of LA:SA typical for any given climate. Interspecific differences in plant hydraulic conductivity are probably responsible for the large scatter of values in the mid quantile-range, and may be an important determinant of tree morphology.

Morphological and moisture availability controls of the leaf area-to-sapwood area ratio: analysis of measurements on Australian trees.

Science.gov (United States)

Togashi, Henrique Furstenau; Prentice, Iain Colin; Evans, Bradley John; Forrester, David Ian; Drake, Paul; Feikema, Paul; Brooksbank, Kim; Eamus, Derek; Taylor, Daniel

2015-03-01

The leaf area-to-sapwood area ratio (LA:SA) is a key plant trait that links photosynthesis to transpiration. The pipe model theory states that the sapwood cross-sectional area of a stem or branch at any point should scale isometrically with the area of leaves distal to that point. Optimization theory further suggests that LA:SA should decrease toward drier climates. Although acclimation of LA:SA to climate has been reported within species, much less is known about the scaling of this trait with climate among species. We compiled LA:SA measurements from 184 species of Australian evergreen angiosperm trees. The pipe model was broadly confirmed, based on measurements on branches and trunks of trees from one to 27 years old. Despite considerable scatter in LA:SA among species, quantile regression showed strong (0.2 < R1 < 0.65) positive relationships between two climatic moisture indices and the lowermost (5%) and uppermost (5-15%) quantiles of log LA:SA, suggesting that moisture availability constrains the envelope of minimum and maximum values of LA:SA typical for any given climate. Interspecific differences in plant hydraulic conductivity are probably responsible for the large scatter of values in the mid-quantile range and may be an important determinant of tree morphology.

OBSERVED ASTEROID SURFACE AREA IN THE THERMAL INFRARED

Energy Technology Data Exchange (ETDEWEB)

Nugent, C. R. [Infrared Processing and Analysis Center, California Institute of Technology, Pasadena, CA 91125 (United States); Mainzer, A.; Masiero, J.; Bauer, J.; Kramer, E.; Sonnett, S. [Jet Propulsion Laboratory, California Institute of Technology, Pasadena, CA 91109 (United States); Wright, E. L. [Department of Physics and Astronomy, University of California, Los Angeles, CA 90095 (United States); Grav, T. [Planetary Science Institute, Tucson, AZ (United States)

2017-02-01

The rapid accumulation of thermal infrared observations and shape models of asteroids has led to increased interest in thermophysical modeling. Most of these infrared observations are unresolved. We consider what fraction of an asteroid’s surface area contributes the bulk of the emitted thermal flux for two model asteroids of different shapes over a range of thermal parameters. The resulting observed surface in the infrared is generally more fragmented than the area observed in visible wavelengths, indicating high sensitivity to shape. For objects with low values of the thermal parameter, small fractions of the surface contribute the majority of thermally emitted flux. Calculating observed areas could enable the production of spatially resolved thermal inertia maps from non-resolved observations of asteroids.

Assessment of dialyzer surface in online hemodiafiltration; objective choice of dialyzer surface area

Directory of Open Access Journals (Sweden)

Francisco Maduell

2015-05-01

Conclusion: The increase in 40% and 80% of dialyzer surface area entails an increase in convective volume of 6 and 16% respectively, showing minimal differences both in convective volume and clearance capacity when UFC was greater than 45 mL/h/mmHg. It is advisable to optimise dialyser efficiency to the smallest surface area possible, adjusting treatment prescription.

Surface States and Effective Surface Area on Photoluminescent P-Type Porous Silicon

Science.gov (United States)

Weisz, S. Z.; Porras, A. Ramirez; Resto, O.; Goldstein, Y.; Many, A.; Savir, E.

1997-01-01

The present study is motivated by the possibility of utilizing porous silicon for spectral sensors. Pulse measurements on the porous-Si/electrolyte system are employed to determine the surface effective area and the surface-state density at various stages of the anodization process used to produce the porous material. Such measurements were combined with studies of the photoluminescence spectra. These spectra were found to shift progressively to the blue as a function of anodization time. The luminescence intensity increases initially with anodization time, reaches a maximum and then decreases with further anodization. The surface state density, on the other hand, increases with anodization time from an initial value of about 2 x 10(exp 12)/sq cm surface to about 1013 sq cm for the anodized surface. This value is attained already after -2 min anodization and upon further anodization remains fairly constant. In parallel, the effective surface area increases by a factor of 10-30. This behavior is markedly different from the one observed previously for n-type porous Si.

Ethylene induced plant stress tolerance by Enterobacter sp. SA187 is mediated by 2‐keto‐4‐methylthiobutyric acid production

KAUST Repository

Zé licourt, Axel de; Synek, Lukas; Saad, Maged; Alzubaidy, Hanin S.; Jalal, Rewaa Sauod Mohammed; Xie, Yakun; Andres-Barrao, Cristina; Rolli, Eleonora; Guerard, Florence; Mariappan, Kiruthiga; Daur, Ihsanullah; Colcombet, Jean; Benhamed, Moussa; Depaepe, Thomas; Van Der Straeten, Dominique; Hirt, Heribert

2018-01-01

of mechanisms related to the beneficial association of SA187 with plants. SA187 colonizes both the surface and inner tissues of Arabidopsis roots and shoots. SA187 induces salt stress tolerance by production of bacterial 2-keto-4-methylthiobutyric acid (KMBA

STEREOLOGICAL ESTIMATION OF SURFACE AREA FROM DIGITAL IMAGES

Directory of Open Access Journals (Sweden)

Johanna Ziegel

2011-05-01

Full Text Available A sampling design of local stereology is combined with a method from digital stereology to yield a novel estimator of surface area based on counts of configurations observed in a digitization of an isotropic 2- dimensional slice with thickness s. As a tool, a result of the second author and J. Rataj on infinitesimal increase of volumes of morphological transforms is refined and used. The proposed surface area estimator is asymptotically unbiased in the case of sets contained in the ball centred at the origin with radius s and in the case of balls centred at the origin with unknown radius. For general shapes bounds for the asymptotic expected relative worst case error are given. A simulation example is discussed for surface area estimation based on 2×2×2-configurations.

Conceptual design of JT-60SA cryostat

International Nuclear Information System (INIS)

Shibama, Y.K.; Sakurai, S.; Masaki, K.; Sukekawa, A.M.; Kaminaga, A.; Yoshida, K.; Matsukawa, M.

2007-01-01

JT-60U modification program to fully superconducting device has been proceeded, namely ''JT-60SA'', toward early realization of fusion energy based on tokamak concept. The design of JT-60SA cryostat is expected to achieve a vacuum thermal insulation for super conducting coils, a bio-shielding boundary and structural gravity support. The cryostat is required to cover JT-60SA tokamak device, which is 15 m of total height and 7 m of radius, but there is geometrical limit due to surrounding devices reutilized. Although the cryostat consists of vessel body and gravity support, and the structural material is low cobalt 304 stainless steel (Co: 2 , and the design of the leaf spring is considered to reduce thermal stress, and to withstand the mechanical loads of plasma disruption and seismic loads. The coolant is 80 K gas helium and both sides of panel are covered with multi-layers super insulation (SI) to reduce heat load (radiation) up to 1/100. Fraction of non-covered region is assumed to be 2% due to many port-joints and supports for the vacuum vessel. Total heat load for inner surface of cryostat (600 m 2 ) is 9kW and the heat load for the port-joints (-300 m 2 ) is assumed up to 9 kW. The operational pressure of the cryostat is required to keep less than 10 -2 Pa and about 100,000 m 2 of structural surfaces is considered for exhaust system specification. Another role of the cryostat is the radiation protection. Biological shielding up to 10 micro-Sv/h (for maintenance acceptance) is required of the cryostat surface after the 10 years operation. Thus the cryostat consists of boron (2 wt%) doped concrete of 220 mm thickness and structural SS304 of total 40 mm thickness. The concrete reduces the air activation (41Ar) in the torus hall by 90% rather than the normal one by the thermal neutron absorption of boron. (orig.)

Specific surface area evaluation method by using scanning electron microscopy

International Nuclear Information System (INIS)

Petrescu, Camelia; Petrescu, Cristian; Axinte, Adrian

2000-01-01

Ceramics are among the most interesting materials for a large category of applications, including both industry and health. Among the characteristic of the ceramic materials, the specific surface area is often difficult to evaluate.The paper presents a method of evaluation for the specific surface area of two ceramic powders by means of scanning electron microscopy measurements and an original method of computing the specific surface area.Cumulative curves are used to calculate the specific surface area under assumption that the values of particles diameters follow a normal logarithmic distribution. For two powder types, X7R and NPO the results are the following: - for the density ρ (g/cm 2 ), 5.5 and 6.0, respectively; - for the average diameter D bar (μm), 0.51 and 0.53, respectively; - for σ, 1.465 and 1.385, respectively; - for specific surface area (m 2 /g), 1.248 and 1.330, respectively. The obtained results are in good agreement with the values measured by conventional methods. (authors)

Clay mineralogy in different geomorphic surfaces in sugarcane areas

Science.gov (United States)

Camargo, L.; Marques, J., Jr.

2012-04-01

The crystallization of the oxides and hydroxides of iron and aluminum and kaolinite of clay fraction is the result of pedogenetic processes controlled by the relief. These minerals have influence on the physical and chemical attributes of soil and exhibit spatial dependence. The pattern of spatial distribution is influenced by forms of relief as the geomorphic surfaces. In this sense, the studies aimed at understanding the relationship between relief and the distribution pattern of the clay fraction attributes contribute to the delineation of specific areas of management in the field. The objective of this study was to evaluate the spatial distribution of oxides and hydroxides of iron and aluminum and kaolinite of clay fraction and its relationship with the physical and chemical attributes in different geomorphic surfaces. Soil samples were collected in a transect each 25 m (100 samples) and in the sides of the same (200 samples) as well as an area of 500 ha (1 sample each six hectare). Geomorphic surfaces (GS) in the transect were mapped in detail to support mapping the entire area. The soil samples were taken to the laboratory for chemical, physical, and mineralogical analysis, and the pattern of spatial distribution of soil attributes was obtained by statistics and geostatistics. The GS I is considered the oldest surface of the study area, with depositional character, and a slope ranging from 0 to 4%. GS II and III are considered to be eroded, and the surface II plan a gentle slope that extends from the edge of the surface until the beginning of I and III. The crystallographic characteristics of the oxides and hydroxides of iron and aluminum and kaolinite showed spatial dependence and the distribution pattern corresponding to the limits present of the GS in the field. Surfaces I and II showed the best environments to the degree of crystallinity of hematite and the surface III to the greatest degree of crystallinity of goethite agreeing to the pedoenvironment

Effect of Macrogeometry on the Surface Topography of Dental Implants.

Science.gov (United States)

Naves, Marina Melo; Menezes, Helder Henrique Machado; Magalhães, Denildo; Ferreira, Jessica Afonso; Ribeiro, Sara Ferreira; de Mello, José Daniel Biasoli; Costa, Henara Lillian

2015-01-01

Because the microtopography of titanium implants influences the biomaterial-tissue interaction, surface microtexturing treatments are frequently used for dental implants. However, surface treatment alone may not determine the final microtopography of a dental implant, which can also be influenced by the implant macrogeometry. This work analyzed the effects on surface roughness parameters of the same treatment applied by the same manufacturer to implants with differing macro-designs. Three groups of titanium implants with different macro-designs were investigated using laser interferometry and scanning electron microscopy. Relevant surface roughness parameters were calculated for different regions of each implant. Two flat disks (treated and untreated) were also investigated for comparison. The tops of the threads and the nonthreaded regions of all implants had very similar roughness parameters, independent of the geometry of the implant, which were also very similar to those of flat disks treated with the same process. In contrast, the flanks and valleys of the threads presented larger irregularities (Sa) with higher slopes (Sdq) and larger developed surface areas (Sdr) on all implants, particularly for implants with threads with smaller heights. The flanks and valleys displayed stronger textures (Str), particularly on the implants with threads with larger internal angles. Parameters associated with the height of the irregularities (Sa), the slope of the asperities (Sdq), the presence of a surface texture (Str), and the developed surface area of the irregularities (Sdr) were significantly affected by the macrogeometry of the implants. Flat disks subjected to the same surface treatment as dental implants reproduced only the surface topography of the flat regions of the implants.

MCO gas composition for low reactive surface areas

International Nuclear Information System (INIS)

Packer, M.J.

1998-01-01

This calculation adjusts modeled output (HNF-SD-SNF-TI-040, Rev. 2) by considering lower reactive fuel surface areas and by increasing the input helium backfill overpressure from 0.5 to 1.5 atm (2.5 atm abs) to verify that MCO gas-phase oxygen concentrations can remain below 4 mole % over a 40 year interim period under a worst case condition of zero reactive surface area. Added backfill gas will dilute any gases generated during interim storage and is a strategy within the current design capability. The zero reactive surface area represents a hypothetical worst case example where there is no fuel scrap and/or damaged spent fuel rods in an MCO. Also included is a hypothetical case where only K East fuel exists in an MCO with an added backfill overpressure of 0.5 atm (1.5 atm abs)

Assessment of dialyzer surface in online hemodiafiltration; objective choice of dialyzer surface area

OpenAIRE

Francisco Maduell; Raquel Ojeda; Marta Arias-Guillén; Giannina Bazan; Manel Vera; Néstor Fontseré; Elisabeth Massó; Miquel Gómez; Lida Rodas; Mario Jiménez-Hernández; Gastón Piñeiro; Nayra Rico

2015-01-01

Introduction: Online haemodiafiltration (OL-HDF) is most effective technique; several randomised studies and meta-analyses have shown a reduction in mortality, with a directly related association with convective volume. At present, it is not properly established whether the increasing in dialyser surface area may suppose better outcomes in terms of convective and clearance efficacy. The purpose of the study was to assess the effect of increase in dialyser surface area on the convective volume...

Lage-area planar RF plasma productions by surface waves

International Nuclear Information System (INIS)

Nonaka, S.

1994-01-01

Large-area rf plasmas are confirmed to be produced by means of RF discharges inside a large-area dielectric tube. The plasma space is 73 cm x 176 cm and 2.5 cm. The plasma is thought to be produced by an odd plasma-surface wave (PSW ο ) in case of using large-area electrodes and by an even plasma-surface wave (PSW ο ) in case of without the electrodes. (author). 7 refs, 4 figs

Development of virtual private network for JT-60SA CAD integration

International Nuclear Information System (INIS)

Oshima, Takayuki; Fujita, Takaaki; Seki, Masami; Kawashima, Hisato; Hoshino, Katsumichi; Shibanuma, Kiyoshi; Verrecchia, M.; Teuchner, B.

2010-01-01

The CAD models will be exchanged and integrated at Naka for JT-60SA, a common computer network efficiently connected between Naka site and the Garching site is needed to be established. Virtual Private Network (VPN) was introduced with LAN on computer network physically-separated from JAEA intranet area and firewall. In July 2009, a new VPN connection between the Naka and Garching sites has been successfully demonstrated using IPSec-VPN technology with a commercial and cost-effective firewall/router for security. It was found that the introduction of the Wide Area File Service (WAFS) could solve the issue of the data transmission time and enhance the usability of the VPN for design integration in JT-60SA. (author)

Development of cortical thickness and surface area in autism spectrum disorder

Directory of Open Access Journals (Sweden)

Vincent T. Mensen

2017-01-01

Full Text Available Autism spectrum disorder (ASD is a neurodevelopmental disorder often associated with changes in cortical volume. The constituents of cortical volume – cortical thickness and surface area – have separable developmental trajectories and are related to different neurobiological processes. However, little is known about the developmental trajectories of cortical thickness and surface area in ASD. In this magnetic resonance imaging (MRI study, we used an accelerated longitudinal design to investigate the cortical development in 90 individuals with ASD and 90 typically developing controls, aged 9 to 20 years. We quantified cortical measures using the FreeSurfer software package, and then used linear mixed model analyses to estimate the developmental trajectories for each cortical measure. Our primary finding was that the development of surface area follows a linear trajectory in ASD that differs from typically developing controls. In typical development, we found a decline in cortical surface area between the ages of 9 and 20 that was absent in ASD. We found this pattern in all regions where developmental trajectories for surface area differed between groups. When we applied a more stringent correction that takes the interdependency of measures into account, this effect on cortical surface area retained significance for left banks of superior temporal sulcus, postcentral area, and right supramarginal area. These areas have previously been implicated in ASD and are involved in the interpretation and processing of audiovisual social stimuli and distinction between self and others. Although some differences in cortical volume and thickness were found, none survived the more stringent correction for multiple testing. This study underscores the importance of distinguishing between cortical surface area and thickness in investigating cortical development, and suggests the development of cortical surface area is of importance to ASD.

Mudanças tecnológicas e seu impacto no processo de trabalho em saúde Technological changes and their impact on the work process in the area of health

Directory of Open Access Journals (Sweden)

Marina Peduzzi

2003-03-01

Full Text Available Objetiva-se aqui analisar as mudanças contemporâneas no mundo do trabalho e os seus efeitos ou impactos nos processo de trabalho em saúde. Trata-se de uma análise que toma como referencial teórico uma vertente dos estudos do trabalho em saúde desenvolvida no Brasil, no campo da saúde coletiva, que, partindo do pressuposto da consubstancialidade entre trabalho e necessidades sociais, vai aprofundar a investigação dos processos de trabalho e seus elementos constituintes, bem como da dimensão intersubjetiva e ético-moral da produção de serviços de saúde. Considerada, de um lado, a complexidade dos objetos de trabalho em saúde que requerem simultaneamente o aprofundamento vertical do conhecimento especializado e a sua integração e, de outro, a introdução de novos modelos organizacionais/gerenciais e a constante inovação e incorporação tecnológica, observam-se mudanças marcantes nos processo de trabalho, dentre as quais destacam-se: o caráter multiprofissional e interdisciplinar das práticas de saúde, o redimensionamento da autonomia profissional diante da necessidade de recomposição dos trabalhos especializados, e a necessidades de garantir maior e permanente qualificação profissional para o conjunto dos trabalhadores em saúde, tanto na dimensão técnica quanto na ético-política e comunicacional.Our objective here is to analyze the contemporary changes in the world of work and their effect - or their impact - on the work processes in the area of health. The theoretical reference for this analysis is a specific stream of studies on work developed in Brazil in the area of collective health. Starting from the assumption that work and social needs are consubstantial, the analysis deepens the investigation of the work processes and their constitutive elements, as well as of the inter-subjective and ethical-moral dimensions of the production of health services. Having considered, on the one hand, the complexity of the

Rapid fabrication of large-area, corrosion-resistant superhydrophobic Mg alloy surfaces.

Science.gov (United States)

Xu, Wenji; Song, Jinlong; Sun, Jing; Lu, Yao; Yu, Ziyuan

2011-11-01

A superhydrophobic magnesium (Mg) alloy surface was successfully fabricated via a facile electrochemical machining process, and subsequently covered with a fluoroalkylsilane (FAS) film. The surface morphologies and chemical compositions were investigated using a scanning electron microscope (SEM) equipped with an energy-dispersive spectroscopy (EDS) and a Fourier-transform infrared spectrophotometer (FTIR). The results show hierarchal rough structures and an FAS film with a low surface energy on the Mg alloy surfaces, which confers good superhydrophobicity with a water contact angle of 165.2° and a water tilting angle of approximately 2°. The processing conditions, such as the processing time and removal rate per unit area at a constant removal mass per unit area, were investigated to determine their effects on the superhydrophobicity. Interestingly, when the removal mass per unit area is constant at approximately 11.10 mg/cm(2), the superhydrophobicity does not change with the removal rate per unit area. Therefore, a superhydrophobic Mg alloy surface can be rapidly fabricated based on this property. A large-area superhydrophobic Mg alloy surface was also fabricated for the first time using a small-area moving cathode. The corrosion resistance and durability of the superhydrophobic surfaces were also examined.

Particle surface area and bacterial activity in recirculating aquaculture systems

DEFF Research Database (Denmark)

Pedersen, Per Bovbjerg; von Ahnen, Mathis; Fernandes, Paulo

2017-01-01

Suspended particles in recirculating aquaculture systems (RAS) provide surface area that can be colonized by bacteria. More particles accumulate as the intensity of recirculation increases thus potentially increasing the bacterial carrying capacity of the systems. Applying a recent, rapid, culture...... but may provide significant surface area. Hence, the study substantiates that particles in RAS provide surface area supporting bacterial activity, and that particles play a key role in controlling the bacterial carrying capacity at least in less intensive RAS. Applying fast, culture-independent techniques......-independent fluorometric detection method (Bactiquant®) for measuring bacterial activity, the current study explored the relationship between total particle surface area (TSA, derived from the size distribution of particles >5 μm) and bacterial activity in freshwater RAS operated at increasing intensity of recirculation...

Monitoring System for ALICE Surface Areas

CERN Document Server

Demirbasci, Oguz

2016-01-01

I have been at CERN for 12 weeks within the scope of Summer Student Programme working on a monitoring system project for surface areas of the ALICE experiment during this period of time. The development and implementation of a monitoring system for environmental parameters in the accessible areas where a cheap hardware setup can be deployed were aim of this project. This report explains how it was developed by using Arduino, Raspberry PI, WinCC OA and DIM protocol.

Archives: Water SA

African Journals Online (AJOL)

Items 1 - 50 of 71 ... Archives: Water SA. Journal Home > Archives: Water SA. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 50 of 71 Items, 1 2 > >>. 2018. Vol 44, No 1 (2018) ...

Draft Genome Sequence of Ochrobactrum intermedium Strain SA148, a Plant Growth-Promoting Desert Rhizobacterium

KAUST Repository

Lafi, Feras Fawzi

2017-03-03

Ochrobactrum intermedium strain SA148 is a plant growth-promoting bacterium isolated from sandy soil in the Jizan area of Saudi Arabia. Here, we report the 4.9-Mb draft genome sequence of this strain, highlighting different pathways characteristic of plant growth promotion activity and environmental adaptation of SA148.

Influence of ultraviolet irradiation treatment on porcelain bond strength of titanium surfaces.

Science.gov (United States)

Kumasaka, Tomonari; Ohno, Akinori; Hori, Norio; Hoshi, Noriyuki; Maruo, Katsuichiro; Kuwabara, Atsushi; Seimiya, Kazuhide; Toyoda, Minoru; Kimoto, Katsuhiko

2018-01-26

To determine the effect of titanium (Ti) surface modification by ultraviolet irradiation (UVI) on the bond strength between Ti and porcelain. Grade 2 Ti plates were allotted to five groups: sandblasted (SA), 15 min UVI (UV), SA+5 min UVI (SA+UV5), SA+10 min UVI (SA+UV10), and SA+15 min UVI (SA+UV15). After surface treatment, porcelain was added. A precious metal (MC) was used for comparison with Ti. The effects of 24-h storage at room temperature versus thermal cycling only at 5 and 55°C in water were evaluated. Subsequently, the tensile strength of each sample was tested. Data were analyzed using one-way analysis of variance and the Tukey test. In both the room temperature and thermal cycling groups, the MC and SA+15 min UVI samples showed significantly greater bond strengths than the other samples (pbond strength between porcelain and the Ti surface.

Size and surface AREA analysis of some metallic and intermetallic powders

International Nuclear Information System (INIS)

Elmasry, M.A.A.; Elsayed, A.A.; Abadir, M.F.

1988-01-01

The powder characterization of three intermetallic compounds ( Cr B, B 4 c and S ib 4 ) and three metallic powders (Fe, Co, and Ni) has been performed. This included the determination of powder density, chemical analysis, impurity analysis, shape factor, particle size analysis and specific surface area. The particle size analysis for the six powders was carried out using three techniques, namely; the 0-23, the microtrac and the fisher sub sieve and size. It was found that the analysis of the two powders and deviates from the log-normal probability distribution and the deviation was corrected. The specific surface area of the powders was measured using the high speed surface area analysis (BET method), and it was also calculated from surface area analysis findings, the BET technique was found to give the highest specific surface area values, and was attributed to the inclusion of internal porosity in the measurement. 8 fig., 10 tab

A interdisciplinaridade vivenciada no PET-Saúde = The interdisciplinarity experienced in the PET- Saúde program

Directory of Open Access Journals (Sweden)

Assega, Mariana Lieka

2010-01-01

Full Text Available Introdução: A incorporação da equipe de saúde bucal na Estratégia de Saúde da Família (ESF, em 2000, possibilitou a adoção de uma postura mais ativa de atenção primária nesta área, visto que a saúde bucal consiste em parte integrante e inseparável da saúde do indivíduo. A interação dos profissionais da saúde torna-se possível por meio de iniciativas como o PET-Saúde, o qual fomenta a formação profissional articulada com os profissionais da ESF, bem como, o processo de integração ensino-serviço-comunidade na perspectiva da interdisciplinaridade. Objetivo: Relatar a vivência de estudantes ao realizar uma pesquisa interdisciplinar. Descrição da experiência: Esse relato foi vivenciado no projeto PET-Saúde da Faculdade de Medicina de Marília, no sub projeto Saúde do Homem, visando construir e validar um instrumento de coleta de dados por meio da Técnica Delphi, para auxiliar a equipe de saúde detectar precocemente agravos odontológicos, visto que no Brasil, o perfil de saúde bucal, na faixa etária de 35 a 44 anos, está comprometido. Os participantes, deste estudo, são discentes de enfermagem e medicina, preceptora cirurgiã-dentista e tutora docente enfermeira. Para as atividades educacionais utilizou-se a metodologia ativa de ensino-aprendizagem. Conclusão: Os movimentos reflexivos, os espaços de diálogos propiciaram o desenvolvimento da investigação científica. Além disso, a aproximação do processo de validação pela Técnica Delphi, também permitiu ampliação do conhecimento multidisciplinar sobre saúde bucal. Esta vivência possibilitou qualificar a formação acadêmico-profissional na linha da interdisciplinaridade, sendo importante sua multiplicação para o fortalecimento da interação entre os profissionais e a articulação das ações de saúde

Health Policy on the pages of Revista de Saúde Pública.

Science.gov (United States)

Bousquat, Aylene; Tanaka, Oswaldo Yoshimi

2016-11-10

We carried out a narrative review of the scientific production in the area of Policy, Planning and Management in Revista de Saúde Pública (RSP), between 1967 and 2015. All the fascicles of RSP, in the period, were accessed via SciELO platform, which provides all articles online. We selected and classified the articles according to the main topics of scientific production in the area of Policy, Planning and Management. Revista de Saúde Pública has published 343 articles on this subject, with significant growth in the last two decades. The most discussed topics were Health Economics, Primary Health-care, Access and Use of Health Services, and Evaluation of Services and Programs. In the last decade, the topics of Policy and Access to Medicines and Public-Private Relationship, including judicialization, gained importance. The pages of RSP embraced the vast and diverse production of Policy, Planning and Management in its first 50 years, contributing to the consolidation of the area in Brazil. RESUMO Foi realizada revisão narrativa da produção científica do campo de Política, Planejamento e Gestão veiculada na Revista de Saúde Pública (RSP), entre 1967 e 2015. Todos os fascículos da RSP, no período, foram acessados via plataforma SciELO, que disponibiliza todos os artigos online. Foram selecionados e classificados os artigos segundo os principais temas da produção científica da área de Política, Planejamento e Gestão. Foram publicados 343 artigos, com crescimento expressivo nas últimas duas décadas. Economia da Saúde, Atenção Primária à Saúde, Acesso e Utilização de Serviços de Saúde e Avaliação de Serviços e Programas foram os temas mais abordados. Na última década, os temas Política e Acesso a Medicamentos e Relação Público-Privado, incluindo a judicialização, ganharam importância. As páginas da RSP abrigaram vasta e diversa produção de Política, Planejamento e Gestão nos seus primeiros 50 anos, contribuindo para

Assessment of nanoparticle surface area by measuring unattached fraction of radon progeny

Energy Technology Data Exchange (ETDEWEB)

Ruzer, Lev S. [Ernest Orlando Lawrence Berkeley National Laboratory, Indoor Environment Department (United States)], E-mail: LSRuzer@lbl.gov

2008-05-15

A number of studies on the exposure of nanometer aerosols have indicated that health effects associated with low-solubility inhaled particles in the range of 1-100 nm may be more appropriately associated with particulate surface area than mass concentration. Such data on correlation between number, surface area and mass concentration are needed for exposure investigations, but the means for measuring aerosol surface area are not readily available. In this paper we propose a method for particle surface area assessment based on a new approach, deposition of the 'unattached fraction of radon progeny' onto nanometer aerosols.The proposed approach represents a synthesis of:(1) Derived direct analytical correlation between the 'unattached fraction' of radon progeny and surface area particle concentration in the range of 1-100 nm particle diameter;(2) Experimental data on correlation between the unattached fraction of radon progeny and particle surface area for particles with diameter in the range of 44 nm-2.1 {mu}m.

Porous silicon structures with high surface area/specific pore size

Science.gov (United States)

Northrup, M.A.; Yu, C.M.; Raley, N.F.

1999-03-16

Fabrication and use of porous silicon structures to increase surface area of heated reaction chambers, electrophoresis devices, and thermopneumatic sensor-actuators, chemical preconcentrates, and filtering or control flow devices. In particular, such high surface area or specific pore size porous silicon structures will be useful in significantly augmenting the adsorption, vaporization, desorption, condensation and flow of liquids and gases in applications that use such processes on a miniature scale. Examples that will benefit from a high surface area, porous silicon structure include sample preconcentrators that are designed to adsorb and subsequently desorb specific chemical species from a sample background; chemical reaction chambers with enhanced surface reaction rates; and sensor-actuator chamber devices with increased pressure for thermopneumatic actuation of integrated membranes. Examples that benefit from specific pore sized porous silicon are chemical/biological filters and thermally-activated flow devices with active or adjacent surfaces such as electrodes or heaters. 9 figs.

Acesso aos serviços de saúde nas áreas urbana e rural do Brasil

Directory of Open Access Journals (Sweden)

Ana Lúcia Kassouf

2005-03-01

Full Text Available Utilizando-se dados da Pesquisa Nacional por Amostra de Domicílios (PNAD, de 1998, analisou-se os determinantes da procura por atendimento à saúde devido à doença, nas áreas urbana e rural do Brasil. A variável estado de saúde do indivíduo foi estimada em função de variáveis de infra-estrutura do domicílio, características individuais, renda familiar, etc., e sua estimativa foi utilizada como variável explanatória na equação de procura por atendimento à saúde, para evitar endogeneidade. O fator mais importante na determinação da procura por atendimento à saúde foi o estado de saúde do indivíduo, tanto na área urbana quanto no meio rural. Na área urbana, o nível de escolaridade também teve grande impacto em reduzir a procura por serviços de saúde.The determinants of the demand for health services due to health problems is analyzed in the urban and rural areas of Brazil, based on a 1998 household survey. The variable health status of each individual was estimated as a function on the household's infrastructure, individual characteristics, family income, etc., and the estimates were used as an explanatory variable in the demand for health services, to avoid endogeneity problems. The most important factor in determining health services in urban and rural areas was the individual's health status. In urban areas, schooling was also important to reduce the demand for health services.

Can foot anthropometric measurements predict dynamic plantar surface contact area?

Directory of Open Access Journals (Sweden)

Collins Natalie

2009-10-01

Full Text Available Abstract Background Previous studies have suggested that increased plantar surface area, associated with pes planus, is a risk factor for the development of lower extremity overuse injuries. The intent of this study was to determine if a single or combination of foot anthropometric measures could be used to predict plantar surface area. Methods Six foot measurements were collected on 155 subjects (97 females, 58 males, mean age 24.5 ± 3.5 years. The measurements as well as one ratio were entered into a stepwise regression analysis to determine the optimal set of measurements associated with total plantar contact area either including or excluding the toe region. The predicted values were used to calculate plantar surface area and were compared to the actual values obtained dynamically using a pressure sensor platform. Results A three variable model was found to describe the relationship between the foot measures/ratio and total plantar contact area (R2 = 0.77, p R2 = 0.76, p Conclusion The results of this study indicate that the clinician can use a combination of simple, reliable, and time efficient foot anthropometric measurements to explain over 75% of the plantar surface contact area, either including or excluding the toe region.

Health Policy on the pages of Revista de Saúde Pública

Directory of Open Access Journals (Sweden)

Aylene Bousquat

Full Text Available ABSTRACT We carried out a narrative review of the scientific production in the area of Policy, Planning and Management in Revista de Saúde Pública (RSP, between 1967 and 2015. All the fascicles of RSP, in the period, were accessed via SciELO platform, which provides all articles online. We selected and classified the articles according to the main topics of scientific production in the area of Policy, Planning and Management. Revista de Saúde Pública has published 343 articles on this subject, with significant growth in the last two decades. The most discussed topics were Health Economics, Primary Health-care, Access and Use of Health Services, and Evaluation of Services and Programs. In the last decade, the topics of Policy and Access to Medicines and Public-Private Relationship, including judicialization, gained importance. The pages of RSP embraced the vast and diverse production of Policy, Planning and Management in its first 50 years, contributing to the consolidation of the area in Brazil.

Stereological estimation of surface area from digital images

DEFF Research Database (Denmark)

Ziegel, Johanna; Kiderlen, Markus

2010-01-01

A sampling design of local stereology is combined with a method from digital stereology to yield a novel estimator of surface area based on counts of configurations observed in a digitization of an isotropic 2- dimensional slice with thickness s. As a tool, a result of the second author and J....... Rataj on infinitesimal increase of volumes of morphological transforms is refined and used. The proposed surface area estimator is asymptotically unbiased in the case of sets contained in the ball centred at the origin with radius s and in the case of balls centred at the origin with unknown radius...

On $L_p$ Affine Surface Area and Curvature Measures

OpenAIRE

Zhao, Yiming

2015-01-01

The relationship between $L_p$ affine surface area and curvature measures is investigated. As a result, a new representation of the existing notion of $L_p$ affine surface area depending only on curvature measures is derived. Direct proofs of the equivalence between this new representation and those previously known are provided. The proofs show that the new representation is, in a sense, "polar" to that of Lutwak's and "dual" to that of Sch\\"utt & Werner's.

High Surface Area Tunnels in Hexagonal WO₃.

Science.gov (United States)

Sun, Wanmei; Yeung, Michael T; Lech, Andrew T; Lin, Cheng-Wei; Lee, Chain; Li, Tianqi; Duan, Xiangfeng; Zhou, Jun; Kaner, Richard B

2015-07-08

High surface area in h-WO3 has been verified from the intracrystalline tunnels. This bottom-up approach differs from conventional templating-type methods. The 3.67 Å diameter tunnels are characterized by low-pressure CO2 adsorption isotherms with nonlocal density functional theory fitting, transmission electron microscopy, and thermal gravimetric analysis. These open and rigid tunnels absorb H(+) and Li(+), but not Na(+) in aqueous electrolytes without inducing a phase transformation, accessing both internal and external active sites. Moreover, these tunnel structures demonstrate high specific pseudocapacitance and good stability in an H2SO4 aqueous electrolyte. Thus, the high surface area created from 3.67 Å diameter tunnels in h-WO3 shows potential applications in electrochemical energy storage, selective ion transfer, and selective gas adsorption.

High-surface-area silica nanospheres (KCC-1) with a fibrous morphology

KAUST Repository

Polshettiwar, Vivek; Cha, Dong Kyu; Zhang, Xixiang; Basset, Jean-Marie

2010-01-01

Fibrous nanosilica: A new family of high-surface-area silica nanospheres (KCC-1) have been prepared (see picture). KCC-1 features excellent physical properties, including high surface area, unprecedented fibrous surface morphology, high thermal (up to 950 °C) and hydrothermal stabilities, and high mechanical stability. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

High-surface-area silica nanospheres (KCC-1) with a fibrous morphology

KAUST Repository

Polshettiwar, Vivek

2010-08-02

Fibrous nanosilica: A new family of high-surface-area silica nanospheres (KCC-1) have been prepared (see picture). KCC-1 features excellent physical properties, including high surface area, unprecedented fibrous surface morphology, high thermal (up to 950 °C) and hydrothermal stabilities, and high mechanical stability. Copyright © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Why Do We Need the Derivative for the Surface Area?

Science.gov (United States)

Hristova, Yulia; Zeytuncu, Yunus E.

2016-01-01

Surface area and volume computations are the most common applications of integration in calculus books. When computing the surface area of a solid of revolution, students are usually told to use the frustum method instead of the disc method; however, a rigorous explanation is rarely provided. In this note, we provide one by using geometric…

Measurement of surface roughness changes of unpolished and polished enamel following erosion.

Directory of Open Access Journals (Sweden)

Francesca Mullan

Full Text Available To determine if Sa roughness data from measuring one central location of unpolished and polished enamel were representative of the overall surfaces before and after erosion.Twenty human enamel sections (4x4 mm were embedded in bis-acryl composite and randomised to either a native or polishing enamel preparation protocol. Enamel samples were subjected to an acid challenge (15 minutes 100 mL orange juice, pH 3.2, titratable acidity 41.3mmol OH/L, 62.5 rpm agitation, repeated for three cycles. Median (IQR surface roughness [Sa] was measured at baseline and after erosion from both a centralised cluster and four peripheral clusters. Within each cluster, five smaller areas (0.04 mm2 provided the Sa roughness data.For both unpolished and polished enamel samples there were no significant differences between measuring one central cluster or four peripheral clusters, before and after erosion. For unpolished enamel the single central cluster had a median (IQR Sa roughness of 1.45 (2.58 μm and the four peripheral clusters had a median (IQR of 1.32 (4.86 μm before erosion; after erosion there were statistically significant reductions to 0.38 (0.35 μm and 0.34 (0.49 μm respectively (p<0.0001. Polished enamel had a median (IQR Sa roughness 0.04 (0.17 μm for the single central cluster and 0.05 (0.15 μm for the four peripheral clusters which statistically significantly increased after erosion to 0.27 (0.08 μm for both (p<0.0001.Measuring one central cluster of unpolished and polished enamel was representative of the overall enamel surface roughness, before and after erosion.

Titanium dioxide nanoparticles modified by salicylic acid and arginine: Structure, surface properties and photocatalytic decomposition of p-nitrophenol

Energy Technology Data Exchange (ETDEWEB)

Li, Lei [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090 (China); Shanxi Province Key Laboratory of Higee-Oriented Chemical Engineering, North University of China, Taiyuan 030051 (China); Feng, Yujie, E-mail: yujief@hit.edu.cn [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090 (China); Liu, Youzhi; Wei, Bing; Guo, Jiaxin; Jiao, Weizhou [Shanxi Province Key Laboratory of Higee-Oriented Chemical Engineering, North University of China, Taiyuan 030051 (China); Zhang, Zhaohan [State Key Laboratory of Urban Water Resource and Environment, Harbin Institute of Technology, Harbin 150090 (China); Zhang, Qiaoling, E-mail: zhangqiaoling@nuc.edu.cn [Shanxi Province Key Laboratory of Higee-Oriented Chemical Engineering, North University of China, Taiyuan 030051 (China)

2016-02-15

Graphical abstract: A simple and versatile synthetic method to produce TiO{sub 2} nanoparticles surface-modified with various organic capping agents can be used for novel multifunctional photocatalysts as required for various applications in energy saving and environmental protection. - Highlights: • SA and Arg was modified through the method of dipping treatment-based on chemical adsorption in saturated solution. • Surface modified TiO{sub 2} applied in photodecomposition of nitroaromatic. • The photoreduction of nitroaromatic and photocatalytic activity under visible light irradiation were enhanced by TiO{sub 2}–SA–Arg. • TiO{sub 2}–SA–Arg showed better lipophilic, dispersion and adsorption properties. - Abstract: In this study, titanium dioxide (TiO{sub 2}) nanoparticles were surface-modified with salicylic acid (SA) and arginine (Arg) using an environmentally friendly and convenient method, and the bonding structure, surface properties and degradation efficiency of p-nitrophenol (PNP) were investigated. X-ray diffractometry (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), X-ray photoelectron spectroscopy (XPS), Fourier-transform infrared spectroscopy (FT-IR), water contact angle (WCA) measurements, ζ-potentiometric analysis, UV/visible diffuse reflectance spectroscopy (UV–vis DRS), and thermogravimetric analysis (TGA) were performed to evaluate the modification effect. The degradation rates were determined by high-performance liquid chromatography (HPLC). The results show that bidentate or bridging bonds are most likely formed between SA/Arg and TiO{sub 2} surface. Surface modification with SA, Arg, or both can improve the lipophilic properties and decrease the zeta potential, and also result in a red shift of the absorption wavelength. TiO{sub 2} nanoparticles modified by Arg or both SA and Arg show a large specific surface area and pore volume. Further, degradation

Saúde pública e saúde coletiva: campo e núcleo de saberes e práticas Public health and collective health: field and core area for knowledge and practice

Directory of Open Access Journals (Sweden)

Gastão Wagner de Sousa Campos

2000-01-01

Full Text Available O artigo discute o campo e o núcleo de saberes e de práticas da saúde coletiva a partir de um metodologia dialética, pensando-a para além do positivismo e do estruturalismo e fazendo uma crítica à sua tendência de assumir posição de transcendência sobre o campo da saúde. A partir dessa análise são elaboradas sugestões para debate, relacionadas centralmente com saúde coletiva entendida como construção sociohistórica de sujeitos concretos.This paper discusses collective health knowledge and practices field and its core based on a dialectics method, beyond positivism and structuralism, to carry out a critical view towards their trends in assuming a transcendent position about the health field. From this analysis on, suggestions for debating are elaborated, taking the historical and social elements of concrete subjects, in their main relation to what is termed collective health.

Nuclear import and export signals of human cohesins SA1/STAG1 and SA2/STAG2 expressed in Saccharomyces cerevisiae.

Directory of Open Access Journals (Sweden)

Leszek J Tarnowski

Full Text Available BACKGROUND: Human SA/STAG proteins, homologues of the yeast Irr1/Scc3 cohesin, are the least studied constituents of the sister chromatid cohesion complex crucial for proper chromosome segregation. The two SA paralogues, SA1 and SA2, show some specificity towards the chromosome region they stabilize, and SA2, but not SA1, has been shown to participate in transcriptional regulation as well. The molecular basis of this functional divergence is unknown. METHODOLOGY/PRINCIPAL FINDINGS: In silico analysis indicates numerous putative nuclear localization (NLS and export (NES signals in the SA proteins, suggesting the possibility of their nucleocytoplasmic shuttling. We studied the functionality of those putative signals by expressing fluorescently tagged SA1 and SA2 in the yeast Saccharomyces cerevisiae. Only the N-terminal NLS turned out to be functional in SA1. In contrast, the SA2 protein has at least two functional NLS and also two functional NES. Depending on the balance between these opposing signals, SA2 resides in the nucleus or is distributed throughout the cell. Validation of the above conclusions in HeLa cells confirmed that the same N-terminal NLS of SA1 is functional in those cells. In contrast, in SA2 the principal NLS functioning in HeLa cells is different from that identified in yeast and is localized to the C-terminus. CONCLUSIONS/SIGNIFICANCE: This is the first demonstration of the possibility of non-nuclear localization of an SA protein. The reported difference in the organization between the two SA homologues may also be relevant to their partially divergent functions. The mechanisms determining subcellular localization of cohesins are only partially conserved between yeast and human cells.

Inductors of change in the training of health personnel: pró-saúde and pet-saúde (pro-health and pet-health strategies

Directory of Open Access Journals (Sweden)

Isabel Cristina Luck Coelho de Holanda

2012-12-01

Full Text Available In the last decade, the training of health professionals has been redesigned in order to meet people’s health needs and not just their demands. Public policies on education and health promoted in partnership with the Ministry of Education and Culture (MEC and the Ministry of Health (Ministério da Saúde - MS signaled for a curricular reform that is essential to graduate schools in health area(1,2.The milestone in the formalization of this change was the introduction of the National Curriculum Guidelines (Diretrizes Curriculares Nacionais - DCN for undergraduate programmes in the health field. All current instruments guide theconstruction of the graduates’ profile by means of an academic and professional model in which attitudes, skills and contents aim at a generalist, humanist, critical and reflective training, with competence in performance of all levels of health care,basing their conduct on scientific and ethical rigour(3-7.Not coincidentally, all documents point out the same fields of competence to be developed during the training of different professionals: health care, decision making, communication, leadership, lifelong education, administration and management (3-7, since health, being a complex field, is unable to perform resolving actions through a single discipline or area of knowledge.The proposal advocated by MEC and MS to produce transformation in the processes of training, working and expanding the service coverage has been accomplished through induction programmes, such as the Reorientation of Professional Training in Health National Programme (Pro-Health and the Educationthrough Labour on Health Programme (PET-Health(1,2.Pro-Health, which has been implemented in the country since 2005, through the disclosure of open announcements, wishes to tune healthcare education and social needs, considering historical, cultural and economic dimensions of the population(8. It encourages discarding the disease as the object of study and

Archives: Health SA Gesondheid

African Journals Online (AJOL)

Items 1 - 42 of 42 ... Archives: Health SA Gesondheid. Journal Home > Archives: Health SA Gesondheid. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register · Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives. 1 - 42 of 42 Items. 2018 ...

features using RBF-SA

Directory of Open Access Journals (Sweden)

Rafael do Espírito Santo

2006-01-01

Full Text Available We present in this work a new type of classes discriminator based upon nonlinear and combinational optimization techniques: radial basis functions-simulated annealing (RBF-SA. The combinational optimization method is used here as a preestimation of some parameters of the network classifier. We compare the classifier performance with and without pre-estimation. For training the classifiers, adopting the leave-one-out procedure, we have used case examples such as mammographic masses (malignant and benign. The classifier is trained with shape factors and edge-sharpness measures extracted from 57 regions of interest (ROI (37 malignant and 20 benign, manually delineated, that describe mammographic masses and tumor features in terms of polygonal models for shape factors (compactness [CC], Fourier description [FF], fractional concavity [FCC] and speculated index [SI] and edge sharpness-acutance (A . The classifier performance is compared in terms of the area under the receive operating characteristic (ROC curve – (A. Higher values of A correspond to a better performance of classifier. Experiments with mammographic tumor and masses show that the best result of 0.9776 is obtained with RBF-SA when RBF parameters such as centers and spread matrix are pre-estimated, which is significantly better than the results obtained with no pre-estimation or only pre-estimation of the RBF centers, which are, 0.7071 and 0.9552 respectively.

Grupo PET-Saúde/Vigilância em Saúde do Trabalhador Portuário: vivência compartilhada

Directory of Open Access Journals (Sweden)

Maria de Fátima Ferreira Queiróz

2015-12-01

Full Text Available Trata-se de um relato de vivência compartilhada do Grupo PET-Saúde/ Vigilância em Saúde do Trabalhador Portuário, da Universidade Federal de São Paulo – Unifesp e o Centro de Referência em Saúde do Trabalhador – CEREST, de Santos, SP. O objetivo é descrever a experiência desse grupo tutorial e sua contribuição para o fortalecimento de ações de vigilância em saúde do trabalhador de Santos. O trabalho portuário é a temática do PET-Saúde por sua importância no cenário nacional e por sofrer transformações que geram fatores de agravos à saúde dos trabalhadores. As ações são desenvolvidas englobando o CEREST, os serviços da rede de saúde de Santos e a comunidade portuária santista. Observa-se que os participantes têm compartilhado conhecimento teórico e prático profissional, contribuindo nas ações dos trabalhadores do CEREST e apontando na direção de aproximação com a rede básica de atenção à saúde.

High surface area carbon and process for its production

Energy Technology Data Exchange (ETDEWEB)

Romanos, Jimmy; Burress, Jacob; Pfeifer, Peter; Rash, Tyler; Shah, Parag; Suppes, Galen

2016-12-13

Activated carbon materials and methods of producing and using activated carbon materials are provided. In particular, biomass-derived activated carbon materials and processes of producing the activated carbon materials with prespecified surface areas and pore size distributions are provided. Activated carbon materials with preselected high specific surface areas, porosities, sub-nm (<1 nm) pore volumes, and supra-nm (1-5 nm) pore volumes may be achieved by controlling the degree of carbon consumption and metallic potassium intercalation into the carbon lattice during the activation process.

Surface water and groundwater interaction in Marala - Khanki area, Punjab

International Nuclear Information System (INIS)

Akram, W.; Ahmad, M.; Latif, Z.; Tariq, J.A.; Malik, M.R.

2011-07-01

Isotope hydrological investigations were carried out in two selected areas of Indus Basin viz. Haripur Area and Chashma- Taunsa Area for elucidating various aspects of surface water and groundwater interaction. Groundwater samples were collected on seasonal basis (low and high river discharge periods) while surface water samples were collected more frequently (weekly or monthly basis). Isotopic data suggested that there is no contribution of surface water to groundwater recharge in Haripur Area and rain is the prevailing source of groundwater recharge. The data further revealed that isotopic values of the Haripur pocket of Tarbela Lake are higher than those of Main Lake / Indus River meaning that there is a significant contribution of base flow in this pocket. Indus River appeared to be the dominant source of groundwater recharge at most of the locations in Chashma- Taunsa Area. Isotopic data of Indus River showed an increase at Taunsa as compared to Chashma in low flow period indicating the high contribution of base flow at this point in time. Stable isotopes were successfully used to quantify the base flow contribution. (author)

Effect of solution and leaf surface polarity on droplet spread area and contact angle.

Science.gov (United States)

Nairn, Justin J; Forster, W Alison; van Leeuwen, Rebecca M

2016-03-01

How much an agrochemical spray droplet spreads on a leaf surface can significantly influence efficacy. This study investigates the effect solution polarity has on droplet spreading on leaf surfaces and whether the relative leaf surface polarity, as quantified using the wetting tension dielectric (WTD) technique, influences the final spread area. Contact angles and spread areas were measured using four probe solutions on 17 species. Probe solution polarity was found to affect the measured spread area and the contact angle of the droplets on non-hairy leaves. Leaf hairs skewed the spread area measurement, preventing investigation of the influence of surface polarity on hairy leaves. WTD-measured leaf surface polarity of non-hairy leaves was found to correlate strongly with the effect of solution polarity on spread area. For non-polar leaf surfaces the spread area decreases with increasing solution polarity, for neutral surfaces polarity has no effect on spread area and for polar leaf surfaces the spread area increases with increasing solution polarity. These results attest to the use of the WTD technique as a means to quantify leaf surface polarity. © 2015 Society of Chemical Industry. © 2015 Society of Chemical Industry.

Robot Towed Shortwave Infrared Camera for Specific Surface Area Retrieval of Surface Snow

Science.gov (United States)

Elliott, J.; Lines, A.; Ray, L.; Albert, M. R.

2017-12-01

Optical grain size and specific surface area are key parameters for measuring the atmospheric interactions of snow, as well as tracking metamorphosis and allowing for the ground truthing of remote sensing data. We describe a device using a shortwave infrared camera with changeable optical bandpass filters (centered at 1300 nm and 1550 nm) that can be used to quickly measure the average SSA over an area of 0.25 m^2. The device and method are compared with calculations made from measurements taken with a field spectral radiometer. The instrument is designed to be towed by a small autonomous ground vehicle, and therefore rides above the snow surface on ultra high molecular weight polyethylene (UHMW) skis.

Nondestructive, stereological estimation of canopy surface area

DEFF Research Database (Denmark)

Wulfsohn, Dvora-Laio; Sciortino, Marco; Aaslyng, Jesper M.

2010-01-01

We describe a stereological procedure to estimate the total leaf surface area of a plant canopy in vivo, and address the problem of how to predict the variance of the corresponding estimator. The procedure involves three nested systematic uniform random sampling stages: (i) selection of plants from...... a canopy using the smooth fractionator, (ii) sampling of leaves from the selected plants using the fractionator, and (iii) area estimation of the sampled leaves using point counting. We apply this procedure to estimate the total area of a chrysanthemum (Chrysanthemum morifolium L.) canopy and evaluate both...... the time required and the precision of the estimator. Furthermore, we compare the precision of point counting for three different grid intensities with that of several standard leaf area measurement techniques. Results showed that the precision of the plant leaf area estimator based on point counting...

Lake Chad Total Surface Water Area as Derived from Land Surface Temperature and Radar Remote Sensing Data

Directory of Open Access Journals (Sweden)

Frederick Policelli

2018-02-01

Full Text Available Lake Chad, located in the middle of the African Sahel belt, underwent dramatic decreases in the 1970s and 1980s leaving less than ten percent of its 1960s surface water extent as open water. In this paper, we present an extended record (dry seasons 1988–2016 of the total surface water area of the lake (including both open water and flooded vegetation derived using Land Surface Temperature (LST data (dry seasons 2000–2016 from the NASA Terra MODIS sensor and EUMETSAT Meteosat-based LST measurements (dry seasons 1988–2001 from an earlier study. We also examine the total surface water area for Lake Chad using radar data (dry seasons 2015–2016 from the ESA Sentinel-1a mission. For the limited number of radar data sets available to us (18 data sets, we find on average a close match between the estimates from these data and the corresponding estimates from LST, though we find spatial differences in the estimates using the two types of data. We use these spatial differences to adjust the record (dry seasons 2000–2016 from MODIS LST. Then we use the adjusted record to remove the bias of the existing LST record (dry seasons 1988–2001 derived from Meteosat measurements and combine the two records. From this composite, extended record, we plot the total surface water area of the lake for the dry seasons of 1988–1989 through 2016–2017. We find for the dry seasons of 1988–1989 to 2016–2017 that the maximum total surface water area of the lake was approximately 16,800 sq. km (February and May, 2000, the minimum total surface water area of the lake was approximately 6400 sq. km (November, 1990, and the average was approximately 12,700 sq. km. Further, we find the total surface water area of the lake to be highly variable during this period, with an average rate of increase of approximately 143 km2 per year.

Sistemas de serviços de saúde: principais tipologias e suas relações com os sistema de saúde brasileiro

OpenAIRE

José Patrício Bispo Júnior; Kelly Leite Maia de Messias

2005-01-01

O presente artigo discute as principais características dos Sistemas de Serviços de Saúde e relaciona o Sistema de Saúde Brasileiro com os três principais tipos de Sistemas de Serviços de Saúde. Conceitua e diferencia Sistema de Saúde de Sistemas de Serviços de Saúde. Apresenta a conformação, objetivos, componentes, características e funções dos Sistemas de Serviços de Saúde. Apresenta e discute os três principais tipos de Sistemas de Serviços de Saúde: Sistema de Saúde de Dominância de Me...

Estimating the surface area of birds: using the homing pigeon (Columba livia as a model

Directory of Open Access Journals (Sweden)

Cristina R. Perez

2014-05-01

Full Text Available Estimation of the surface area of the avian body is valuable for thermoregulation and metabolism studies as well as for assessing exposure to oil and other surface-active organic pollutants from a spill. The use of frozen carcasses for surface area estimations prevents the ability to modify the posture of the bird. The surface area of six live homing pigeons in the fully extended flight position was estimated using a noninvasive method. An equation was derived to estimate the total surface area of a pigeon based on its body weight. A pigeon's surface area in the fully extended flight position is approximately 4 times larger than the surface area of a pigeon in the perching position. The surface area of a bird is dependent on its physical position, and, therefore, the fully extended flight position exhibits the maximum area of a bird and should be considered the true surface area of a bird.

Estimating the surface area of birds: using the homing pigeon (Columba livia) as a model.

Science.gov (United States)

Perez, Cristina R; Moye, John K; Pritsos, Chris A

2014-05-08

Estimation of the surface area of the avian body is valuable for thermoregulation and metabolism studies as well as for assessing exposure to oil and other surface-active organic pollutants from a spill. The use of frozen carcasses for surface area estimations prevents the ability to modify the posture of the bird. The surface area of six live homing pigeons in the fully extended flight position was estimated using a noninvasive method. An equation was derived to estimate the total surface area of a pigeon based on its body weight. A pigeon's surface area in the fully extended flight position is approximately 4 times larger than the surface area of a pigeon in the perching position. The surface area of a bird is dependent on its physical position, and, therefore, the fully extended flight position exhibits the maximum area of a bird and should be considered the true surface area of a bird. © 2014. Published by The Company of Biologists Ltd | Biology Open.

Determining surface areas of marine alga cells by acid-base titration method.

Science.gov (United States)

Wang, X; Ma, Y; Su, Y

1997-09-01

A new method for determining the surface area of living marine alga cells was described. The method uses acid-base titration to measure the surface acid/base amount on the surface of alga cells and uses the BET (Brunauer, Emmett, and Teller) equation to estimate the maximum surface acid/base amount, assuming that hydrous cell walls have carbohydrates or other structural compounds which can behave like surface Brönsted acid-base sites due to coordination of environmental H2O molecules. The method was applied to 18 diverse alga species (including 7 diatoms, 2 flagellates, 8 green algae and 1 red alga) maintained in seawater cultures. For the species examined, the surface areas of individual cells ranged from 2.8 x 10(-8) m2 for Nannochloropsis oculata to 690 x 10(-8) m2 for Dunaliella viridis, specific surface areas from 1,030 m2.g-1 for Dunaliella salina to 28,900 m2.g-1 for Pyramidomonas sp. Measurement accuracy was 15.2%. Preliminary studies show that the method may be more promising and accurate than light/electron microscopic measurements for coarse estimation of the surface area of living algae.

Severe accident training simulator APROS SA

International Nuclear Information System (INIS)

Raiko, Eerikki; Salminen, Kai; Lundstroem, Petra; Harti, Mika; Routamo, Tomi

2003-01-01

APROS SA is a severe accident training simulator based on the APROS simulation environment. APROS SA has been developed in Fortum Nuclear Services Ltd to serve as a training tool for the personnel of the Loviisa NPP. Training with APROS SA gives the personnel a deeper understanding of the severe accident phenomena and thus it is an important part of the implementation of the severe accident management strategy. APROS SA consists of two parts, a comprehensive Loviisa plant model and an external severe accident model. The external model is an extension to the Loviisa plant model, which allows the simulation to proceed into the severe accident phase. The severe accident model has three submodels: the core melting and relocation model, corium pool model and fission product model. In addition to these, a new thermal-hydraulic solver is introduced to the core region of the Loviisa plant model to replace the more limited APROS thermal-hydraulic solver. The full APROS SA training simulator has a graphical user interface with visualizations of both severe accident management panels at the operator room and the important physical phenomena during the accident. This paper describes the background of the APROS SA training simulator, the severe accident submodels and the graphical user interface. A short description how APROS SA will be used as a training tool at the Loviisa NPP is also given

NEW CONCEPTS AND TEST METHODS OF CURVE PROFILE AREA DENSITY IN SURFACE: ESTIMATION OF AREAL DENSITY ON CURVED SPATIAL SURFACE

OpenAIRE

Hong Shen

2011-01-01

The concepts of curve profile, curve intercept, curve intercept density, curve profile area density, intersection density in containing intersection (or intersection density relied on intersection reference), curve profile intersection density in surface (or curve intercept intersection density relied on intersection of containing curve), and curve profile area density in surface (AS) were defined. AS expressed the amount of curve profile area of Y phase in the unit containing surface area, S...

Amylolytic hydrolysis of native starch granules affected by granule surface area.

Science.gov (United States)

Kim, J C; Kong, B W; Kim, M J; Lee, S H

2008-11-01

Initial stage of hydrolysis of native starch granules with various amylolytic enzymes, alpha-amylase from Bacillus subtilis, glucoamylase I (GA-I) and II (GA-II) from Aspergillus niger, and beta-amylase from sweet potato showed that the reaction was apparently affected by a specific surface area of the starch granules. The ratios of the reciprocal of initial velocity of each amylolytic hydrolysis for native potato and maize starch to that for rice with the amylolytic enzymes were nearly equivalent to the ratio of surface area per mass of the 2 starch granules to that of rice, that is, 6.94 and 2.25, respectively. Thus, the reciprocal of initial velocity of each enzymatic hydrolysis as expressed in a Lineweaver-Burk plot was a linear function of the reciprocal of surface area for each starch granule. As a result, it is concluded that amylolytic hydrolysis of native starch granules is governed by the specific surface area, not by the mass concentration, of each granule.

Åsa portreed / Åsa Johannesson ; intervjueerinud Kaisa Eiche

Index Scriptorium Estoniae

Johannesson, Åsa

2009-01-01

Rootsi fotograafist Åsa Johannessonist, kelle portreefotode seeriat "Portraits of Her" eksponeeriti Riias toimunud kunstiüritusel "MOMENT". Tema õpingutest ja elust Londonis. Naiselikkusest ja mehelikkusest

High surface area fibrous silica nanoparticles

KAUST Repository

Polshettiwar, Vivek; Basset, Jean-Marie

2014-01-01

Disclosed are high surface area nanoparticles that have a fibrous morphology. The nanoparticles have a plurality of fibers, wherein each fiber is in contact with one other fiber and each fiber has a length of between about 1 nm and about 5000 nm. Also disclosed are applications of the nanoparticles of the present invention, and methods of fabrication of the nanoparticles of the present invention.

High surface area fibrous silica nanoparticles

KAUST Repository

Polshettiwar, Vivek

2014-11-11

Disclosed are high surface area nanoparticles that have a fibrous morphology. The nanoparticles have a plurality of fibers, wherein each fiber is in contact with one other fiber and each fiber has a length of between about 1 nm and about 5000 nm. Also disclosed are applications of the nanoparticles of the present invention, and methods of fabrication of the nanoparticles of the present invention.

Root surface area measurement of permanent dentition in Indian population – CBCT analysis

Directory of Open Access Journals (Sweden)

Kanika Lakhani

2017-01-01

Full Text Available The area of the root surface of human teeth has been investigated extensively in the dental literature. All previous attempts mainly rely on the use of physical methods to calculate surface area on extracted teeth or use virtual 3D Models for the same. The aim is to develop an algorithm using MATLAB software that estimates the dimensions of 3-D image produced with the help of CBCT so that the same can be utilized to calculate the root surface area of teeth among Indian population. Present research utilizes CBCT images of samples of extracted teeth mounted on a customized jpg. A descriptive chart for statistical analysis has been prepared to obtain average root surface area of each tooth type. The currently developed algorithm has been successfully applied to the CBCT images of complete sample of teeth to obtain their root surface area. The algorithm developed to calculate root surface area of the teeth holds wide spread application in the field of dentistry pursuing its high expediency in even various specializations of dentistry including orthodontics, prosthodontics, periodontology and implantalogy. It is concluded that it has now become a reality to accurately determine the surface area of the root of human teeth without extracting them using the CBCT radiographs of the patients.

Saúde do Trabalhador: necessidades desconsideradas pela gestão do Sistema Único de Saúde

Directory of Open Access Journals (Sweden)

Luiz Carlos Fadel de Vasconcellos

Full Text Available RESUMO O texto, enquanto ensaio reflexivo, tem como objetivo analisar as normas operacionais e de pactuação do Sistema Único de Saúde (SUS, no sentido de observar se o enunciado normativo decorrente dos pactos em saúde é coerente com a determinação constitucional de promoção, proteção e reabilitação da saúde dos trabalhadores e com o enfrentamento dos alarmantes indicadores epidemiológicos dos agravos decorrentes do trabalho. Utiliza, como método, a análise documental e bibliográfica referente ao tema e conclui que, a partir das necessidades em saúde, aquelas que dizem respeito à saúde do trabalhador são desconsideradas pelos mecanismos de pactuação e gestão do SUS.

Surface area of antimony oxide by isotope exchange and other methods

Energy Technology Data Exchange (ETDEWEB)

Rao, Y.K.; Acharya, B.V.; Rangamannar, B.

1985-06-17

Specific surface areas of antimony oxide samples, one commercial, the other prepared from antimony trichloride were measured by heterogeneous isotope exchange, gas adsorption, air permeability and microscopic methods. Specific surface areas obtained by these four methods for the two samples were compared and the observed differences are explained.

Saúde e desenvolvimento

Directory of Open Access Journals (Sweden)

Ana Luiza D'Ávila Viana

Full Text Available Considerando que os modernos sistemas de saúde são o resultado da complexa interação de processos econômicos, políticos e sociais, o objetivo do trabalho é discutir a relação entre saúde e desenvolvimento no Brasil, mostrando que o esgotamento do modelo liberal de política econômica abre nova perspectiva para a retomada do desenvolvimento, entendido como combinação entre crescimento da economia, mudanças na estrutura produtiva e melhora das condições de vida da população. O complexo produtivo da saúde joga papel decisivo nesse processo, pois constitui um campo em que inovação tecnológica e acumulação de capital geram oportunidades de investimento, trabalho e renda, além de produzir avanços importantes para melhorar o estado de saúde das pessoas. A recente adoção de políticas públicas voltadas para articular, de forma positiva, aspectos da política econômica e da política social revela que a questão do desenvolvimento nacional ganhou nova centralidade na agenda governamental, o que abre a perspectiva de maior integração entre a lógica econômica e a lógica sanitária. Entretanto, é preciso reconhecer que o Brasil ainda não logrou alcançar uma associação virtuosa entre saúde e desenvolvimento.

Surface-Casting Synthesis of Mesoporous Zirconia with a CMK-5-Like Structure and High Surface Area.

Science.gov (United States)

Gu, Dong; Schmidt, Wolfgang; Pichler, Christian M; Bongard, Hans-Josef; Spliethoff, Bernd; Asahina, Shunsuke; Cao, Zhengwen; Terasaki, Osamu; Schüth, Ferdi

2017-09-04

About 15 years ago, the Ryoo group described the synthesis of CMK-5, a material consisting of a hexagonal arrangement of carbon nanotubes. Extension of the surface casting synthesis to oxide compositions, however, was not possible so far, in spite of many attempts. Here it is demonstrated, that crystalline mesoporous hollow zirconia materials with very high surface areas up to 400 m 2  g -1 , and in selected cases in the form of CMK-5-like, are indeed accessible via such a surface casting process. The key for the successful synthesis is an increased interaction between the silica hard template surface and the zirconia precursor species by using silanol group-rich mesoporous silica as a hard template. The surface areas of the obtained zirconias exceed those of conventionally hard-templated ones by a factor of two to three. The surface casting process seems to be applicable also to other oxide materials. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

Large area, surface discharge pumped, vacuum ultraviolet light source

Science.gov (United States)

Sze, R.C.; Quigley, G.P.

1996-12-17

Large area, surface discharge pumped, vacuum ultraviolet (VUV) light source is disclosed. A contamination-free VUV light source having a 225 cm{sup 2} emission area in the 240-340 nm region of the electromagnetic spectrum with an average output power in this band of about 2 J/cm{sup 2} at a wall-plug efficiency of approximately 5% is described. Only ceramics and metal parts are employed in this surface discharge source. Because of the contamination-free, high photon energy and flux, and short pulse characteristics of the source, it is suitable for semiconductor and flat panel display material processing. 3 figs.

Determining eyeball surface area directly exposed to the effects of external factors.

Science.gov (United States)

Juliszewski, Tadeusz; Kadłuczka, Filip; Kiełbasa, Paweł

2016-01-01

This article discusses determining the surface area of eyeballs of men and women exposed to the direct effects of external factors in the working environment. For one eye, the mean surface is 172-182 mm(2). The determined surface area can be used in formulas for calculating the exposure of eyeballs to harmful chemical substances in workplace air.

Cortical surface area and cortical thickness in the precuneus of adult humans.

Science.gov (United States)

Bruner, E; Román, F J; de la Cuétara, J M; Martin-Loeches, M; Colom, R

2015-02-12

The precuneus has received considerable attention in the last decade, because of its cognitive functions, its role as a central node of the brain networks, and its involvement in neurodegenerative processes. Paleoneurological studies suggested that form changes in the deep parietal areas represent a major character associated with the origin of the modern human brain morphology. A recent neuroanatomical survey based on shape analysis suggests that the proportions of the precuneus are also a determinant source of overall brain geometrical differences among adult individuals, influencing the brain spatial organization. Here, we evaluate the variation of cortical thickness and cortical surface area of the precuneus in a sample of adult humans, and their relation with geometry and cognition. Precuneal thickness and surface area are not correlated. There is a marked individual variation. The right precuneus is thinner and larger than the left one, but there are relevant fluctuating asymmetries, with only a modest correlation between the hemispheres. Males have a thicker cortex but differences in cortical area are not significant between sexes. The surface area of the precuneus shows a positive allometry with the brain surface area, although the correlation is modest. The dilation/contraction of the precuneus, described as a major factor of variability within adult humans, is associated with absolute increase/decrease of its surface, but not with variation in thickness. Precuneal thickness, precuneal surface area and precuneal morphology are not correlated with psychological factors such as intelligence, working memory, attention control, and processing speed, stressing further possible roles of this area in supporting default mode functions. Beyond gross morphology, the processes underlying the large phenotypic variation of the precuneus must be further investigated through specific cellular analyses, aimed at considering differences in cellular size, density

Revista de Saúde Pública: 50 years disseminating the knowledge in nutrition.

Science.gov (United States)

Sichieri, Rosely; Pereira, Rosangela A

2016-12-22

This work describes and comments on articles in the area of Public Health Nutrition published in Revista de Saúde Pública (RSP - Public Health Journal) from 1967 to 2016. We searched in the PubMed database restricted to the periodical "Revista de Saúde Pública" and using terms related to key topics in the area of Public Health Nutrition. We retrieved 742 articles and, after exclusion of duplicates and articles unrelated to the subject, we analyzed 441 articles, grouped according to subject: dental caries, anemia, hypovitaminosis A, macro/micronutrients, malnutrition, nutritional assessment, overweight/obesity, food consumption, low birthweight, and breastfeeding. We observed significant increase in the number of articles published and diversification of subjects addressed over the 50 years, representing the consistent development of the scientific field of Nutrition in Brazil. Since its inception, RSP has played an important role in the dissemination of knowledge about the main nutritional issues in Brazil. RESUMO Este trabalho descreve e comenta os artigos na área de Nutrição em Saúde Pública, publicados na Revista de Saúde Pública (RSP) de 1967 a 2016. Foi realizada busca na base de dados PubMed restrita ao periódico "Revista de Saúde Pública" e utilizando termos relacionados com temáticas chaves da área de Nutrição em Saúde Pública. Foram recuperados 742 artigos e, após as exclusões dos artigos repetidos e daqueles não relacionados com a temática, foram analisados 441 artigos, agrupados segundo o tema: cárie dental, anemia, hipovitaminose A, macro/micronutrientes, desnutrição, avaliação do estado nutricional, sobrepeso/obesidade, consumo de alimentos, baixo peso ao nascer, e aleitamento materno. Observou-se incremento significativo no número de artigos publicados e a diversificação dos temas tratados ao longo destes 50 anos, retratando o consistente desenvolvimento do campo científico da Nutrição no Brasil. Desde seu início, a

Effects of tooth whitening and orange juice on surface properties of dental enamel.

Science.gov (United States)

Ren, Yan-Fang; Amin, Azadeh; Malmstrom, Hans

2009-06-01

To study the effects of 6% H2O2 activated with LED light on surface enamel as compared to orange juice challenges in vitro. A total of 40 human enamel discs were incubated in saliva overnight to allow pellicle formation and then divided into three groups: 15 for whitening treatments, 15 for orange juice immersions and 10 for normal saline controls. Baseline microhardness was measured with a microhardness Knoop indenter (50g, 10s) and surface topography was evaluated with a focus-variation 3D scanning microscopy. Enamel discs were treated with H2O2 or orange juice for 20 min each cycle for five cycles to simulate daily treatment with the products for 5 days. The discs were stored in saliva between treatment cycles. Microhardness and surface topography were evaluated again after treatments. Changes in microhardness and in surface area roughness (Sa), mean maximum peak-to-valley distance (Sz) and the developed surface area ratio (Sdr) were compared before and after treatments (t-test) and among groups (ANOVA). Enamel surface hardness decreased by 84% after orange juice immersion but no statistically significant changes were observed in the whitening and control groups. Surface topography changed significantly only in the orange juice group as shown by increased Sa (1.2 microm vs. 2.0 microm), Sz (7.7 microm vs. 10.2 microm) and Sdr (2.8% vs. 6.0%). No such changes were observed in the whitening and control groups. In comparison to orange juice challenges, the effects of 6% H2O2 on surface enamel are insignificant. Orange juice erosion markedly decreased hardness and increased roughness of enamel.

Effect of impervious surface area and vegetation changes on mean ...

African Journals Online (AJOL)

adeniyi adeyemi

Land surface temperature (LST) is measured by the surface energy balance, .... climatic and environmental conditions (Cheng et al., 2006). ..... urban areas have generally resulted in a high reflection and emission of solar radiation and greater.

Surface Area of Patellar Facets: Inferential Statistics in the Iraqi Population

Directory of Open Access Journals (Sweden)

Ahmed Al-Imam

2017-01-01

Full Text Available Background. The patella is the largest sesamoid bone in the body; its three-dimensional complexity necessitates biomechanical perfection. Numerous pathologies occur at the patellofemoral unit which may end in degenerative changes. This study aims to test the presence of statistical correlation between the surface areas of patellar facets and other patellar morphometric parameters. Materials and Methods. Forty dry human patellae were studied. The morphometry of each patella was measured using a digital Vernier Caliper, electronic balance, and image analyses software known as ImageJ. The patellar facetal surface area was correlated with patellar weight, height, width, and thickness. Results. Inferential statistics proved the existence of linear correlation of total facetal surface area and patellar weight, height, width, and thickness. The correlation was strongest for surface area versus patellar weight. The lateral facetal area was found persistently larger than the medial facetal area, the p value was found to be <0.001 (one-tailed t-test for right patellae, and another significant p value of < 0.001 (one-tailed t-test was found for left patellae. Conclusion. These data are vital for the restoration of the normal biomechanics of the patellofemoral unit; these are to be consulted during knee surgeries and implant designs and can be of an indispensable anthropometric, interethnic, and biometric value.

The interdisciplinarity experienced in the PET- Saúde program A interdisciplinaridade vivenciada no PET-Saúde

Directory of Open Access Journals (Sweden)

Sueli Moreira Pirolo

2010-01-01

Full Text Available Introduction: The incorporation of the oral health team in the Family Health Strategy (ESF, in 2000, enabled the adoption of a more active attitude of Primary Health Care in this field, in as much as oral health consists of an inseparable and integral part of the individual’s health. The interaction of health professionals becomes possible through policies like “PET-Saúde” which promotes the professional formation articulated with the ESF professionals as well as the process of integration of teaching, service and community in the perspective of interdisciplinarity. Objective: To report the experience of students during an interdisciplinary research. Description of the experience: This report was experienced in “PET-Saúde” of the Faculty of Medicine of Marília, at the “Man’s Health” subproject aiming at elaborating and validating a data collection instrument through Delphi Technique in order to help the health care team to detect early dental problems because of the damaged oral health pattern of the age group between 35 and 44 in Brazil. The members of this study are: medical and nursing students, a dentist preceptor and a nursing tutor. For the educational activities, the active methodology of teaching-learning was used. Conclusion: The reflexive actions, the moments for discussions provided the development of scientific investigation. The approximation of the process of validation through Delphi Technique also allowed the expansion of multidisciplinary knowledge on oral health. This experience made it possible to qualify the academic-professional formation on the interdisciplinary approach, and it’s important to strengthen the interaction among professionals and the articulation of health actions.Introdução: A incorporação da equipe de saúde bucal na Estratégia de Saúde da Família (ESF, em 2000, possibilitou a adoção de uma postura mais ativa de atenção primária nesta área, visto que a saúde bucal consiste

Thermal Desorption Analysis of Effective Specific Soil Surface Area

Science.gov (United States)

Smagin, A. V.; Bashina, A. S.; Klyueva, V. V.; Kubareva, A. V.

2017-12-01

A new method of assessing the effective specific surface area based on the successive thermal desorption of water vapor at different temperature stages of sample drying is analyzed in comparison with the conventional static adsorption method using a representative set of soil samples of different genesis and degree of dispersion. The theory of the method uses the fundamental relationship between the thermodynamic water potential (Ψ) and the absolute temperature of drying ( T): Ψ = Q - aT, where Q is the specific heat of vaporization, and a is the physically based parameter related to the initial temperature and relative humidity of the air in the external thermodynamic reservoir (laboratory). From gravimetric data on the mass fraction of water ( W) and the Ψ value, Polyanyi potential curves ( W(Ψ)) for the studied samples are plotted. Water sorption isotherms are then calculated, from which the capacity of monolayer and the target effective specific surface area are determined using the BET theory. Comparative analysis shows that the new method well agrees with the conventional estimation of the degree of dispersion by the BET and Kutilek methods in a wide range of specific surface area values between 10 and 250 m2/g.

Desigualdade social e saúde no Brasil

Directory of Open Access Journals (Sweden)

Neri Marcelo

2002-01-01

Full Text Available Esse artigo estuda a relação entre desigualdade social e saúde no Brasil. A estratégia usada foi avaliar as necessidades e o consumo dos serviços de saúde, bem como o acesso a seguro saúde ao longo da distribuição de renda. Adicionalmente, por meio da estimação de uma regressão logística, foram avaliados outros determinantes do consumo dos serviços de saúde, com o intuito de se conhecer aonde e quem utiliza esses serviços no país. Os dados foram extraídos da Pesquisas Nacional de Amostra por Domicilio da Fundação Instituto Brasileiro de Geografia e Estatística levada a campo em 1998. Em geral, observou-se que os indivíduos nos primeiros décimos da distribuição de renda têm pior acesso a seguro saúde, necessitam de maiores cuidados médicos, mas consomem menos os serviços de saúde. As outras características extra rendimento indicam que os principais determinantes para o consumo dos serviços de saúde estariam fortemente associados aos grupos sociais mais privilegiados (de maior escolaridade, acesso a seguro saúde, água, esgoto, luz, coleta de lixo e a fatores que apontam para capacidade de geração de oferta desses serviços no país.

Preparation, Surface and Pore Structure of High Surface Area Activated Carbon Fibers from Bamboo by Steam Activation

Directory of Open Access Journals (Sweden)

Xiaojun Ma

2014-06-01

Full Text Available High surface area activated carbon fibers (ACF have been prepared from bamboo by steam activation after liquefaction and curing. The influences of activation temperature on the microstructure, surface area and porosity were investigated. The results showed that ACF from bamboo at 850 °C have the maximum iodine and methylene blue adsorption values. Aside from the graphitic carbon, phenolic and carbonyl groups were the predominant functions on the surface of activated carbon fiber from bamboo. The prepared ACF from bamboo were found to be mainly type I of isotherm, but the mesoporosity presented an increasing trend after 700 °C. The surface area and micropore volume of samples, which were determined by application of the Brunauer-Emmett-Teller (BET and t-plot methods, were as high as 2024 m2/g and 0.569 cm3/g, respectively. It was also found that the higher activation temperature produced the more ordered microcrystalline structure of ACF from bamboo.

Ethylene induced plant stress tolerance by Enterobacter sp. SA187 is mediated by 2-keto-4-methylthiobutyric acid production.

Directory of Open Access Journals (Sweden)

Axel de Zélicourt

2018-03-01

Full Text Available Several plant species require microbial associations for survival under different biotic and abiotic stresses. In this study, we show that Enterobacter sp. SA187, a desert plant endophytic bacterium, enhances yield of the crop plant alfalfa under field conditions as well as growth of the model plant Arabidopsis thaliana in vitro, revealing a high potential of SA187 as a biological solution for improving crop production. Studying the SA187 interaction with Arabidopsis, we uncovered a number of mechanisms related to the beneficial association of SA187 with plants. SA187 colonizes both the surface and inner tissues of Arabidopsis roots and shoots. SA187 induces salt stress tolerance by production of bacterial 2-keto-4-methylthiobutyric acid (KMBA, known to be converted into ethylene. By transcriptomic, genetic and pharmacological analyses, we show that the ethylene signaling pathway, but not plant ethylene production, is required for KMBA-induced plant salt stress tolerance. These results reveal a novel molecular communication process during the beneficial microbe-induced plant stress tolerance.

Nas Trilhas (desconhecidas da saúde: a política pública de saúde para os homens no Brasil.

Directory of Open Access Journals (Sweden)

Marlene Neves Strey

2012-11-01

Full Text Available Neste estudo abordamos as diferentes formas de masculinidades e sua relação com a saúde, contempladas na Política de Atenção Integral à saúde do Homem (PNAISH implementada no Brasil no ano de 2009. Através de uma análise documental dessa política, pretendemos compreender os discursos masculinos que nela estão, bem como analisar a relação entre o discurso da política e as diferentes formas de produção de saúde. Devido a não estarem acostumados a se expor a um profissional de saúde, os homens sentem-se envergonhados, e além disso, atribuem sua baixa procura aos serviços de saúde, à falta de cuidados e escuta adequadas com um olhar de gênero que possa dar conta de suas demandas. Essa nova política de saúde para os homens criada no Brasil pretende atuar de maneira a atingir uma mudança cultural, que possibilite aos homens maior cuidado com sua saúde. Além disso, olhar para os modos de produção de masculinidades nos dias atuais e seus discursos sobre saúde é estar atento aos comportamentos que, devido à herança pautada nas diferenças entre os sexos, contribui para obstaculizar o acesso dos homens aos serviços de saúde.

Whole object surface area and volume of partial-view 3D models

International Nuclear Information System (INIS)

Mulukutla, Gopal K; Proussevitch, Alexander A; Genareau, Kimberly D; Durant, Adam J

2017-01-01

Micro-scale 3D models, important components of many studies in science and engineering, are often used to determine morphological characteristics such as shape, surface area and volume. The application of techniques such as stereoscopic scanning electron microscopy on whole objects often results in ‘partial-view’ models with a portion of object not within the field of view thus not captured in the 3D model. The nature and extent of the surface not captured is dependent on the complex interaction of imaging system attributes (e.g. working distance, viewing angle) with object size, shape and morphology. As a result, any simplistic assumptions in estimating whole object surface area or volume can lead to significant errors. In this study, we report on a novel technique to estimate the physical fraction of an object captured in a partial-view 3D model of an otherwise whole object. This allows a more accurate estimate of surface area and volume. Using 3D models, we demonstrate the robustness of this method and the accuracy of surface area and volume estimates relative to true values. (paper)

Measurement of the specific surface area of loose copper deposit by electrochemical methods

Directory of Open Access Journals (Sweden)

E. A. Dolmatova

2016-07-01

Full Text Available In the work the surface area of the electrode with dispersed copper deposit obtained within 30 seconds was evaluated by techniques of chronopotentiometry (CPM and impedance spectroscopy. In method CPM the electrode surface available for measurement depends on the value of the polarizing current. At high currents during the transition time there is a change of surface relief that can not determine the full surface of loose deposit. The electrochemical impedance method is devoid of this shortcoming since the measurements are carried out in indifferent electrolyte in the absence of current. The area measured by the impedance is tens of times higher than the value obtained by chronopotentiometry. It is found that from a solution containing sulfuric acid the deposits form with a high specific surface area. Based on these data it was concluded that the method of impedance spectroscopy can be used to measure in situ the surface area of the dispersed copper deposits.

Estimating surface fluxes over the north Tibetan Plateau area with ASTER imagery

Directory of Open Access Journals (Sweden)

Weiqiang Ma

2009-01-01

Full Text Available Surface fluxes are important boundary conditions for climatological modeling and Asian monsoon system. The recent availability of high-resolution, multi-band imagery from the ASTER (Advanced Space-borne Thermal Emission and Reflection radiometer sensor has enabled us to estimate surface fluxes to bridge the gap between local scale flux measurements using micrometeorological instruments and regional scale land-atmosphere exchanges of water and heat fluxes that are fundamental for the understanding of the water cycle in the Asian monsoon system. A parameterization method based on ASTER data and field observations has been proposed and tested for deriving surface albedo, surface temperature, Normalized Difference Vegetation Index (NDVI, Modified Soil Adjusted Vegetation Index (MSAVI, vegetation coverage, Leaf Area Index (LAI, net radiation flux, soil heat flux, sensible heat flux and latent heat flux over heterogeneous land surface in this paper. As a case study, the methodology was applied to the experimental area of the Coordinated Enhanced Observing Period (CEOP Asia-Australia Monsoon Project (CAMP on the Tibetan Plateau (CAMP/Tibet, located at the north Tibetan Plateau. The ASTER data of 24 July 2001, 29 November 2001 and 12 March 2002 was used in this paper for the case of summer, winter and spring. To validate the proposed methodology, the ground-measured surface variables (surface albedo and surface temperature and land surface heat fluxes (net radiation flux, soil heat flux, sensible heat flux and latent heat flux were compared to the ASTER derived values. The results show that the derived surface variables and land surface heat fluxes in three different months over the study area are in good accordance with the land surface status. Also, the estimated land surface variables and land surface heat fluxes are in good accordance with ground measurements, and all their absolute percentage difference (APD is less than 10% in the validation sites

Environmental and geochemical assessment of surface sediments on irshansk ilmenite deposit area

Directory of Open Access Journals (Sweden)

Наталия Олеговна Крюченко

2015-03-01

Full Text Available It is revealed the problem of pollution of surface sediments of Irshansk ilmenite deposit area of various chemical elements hazard class (Mn, V, Ba, Ni, Co, Cr, Mo, Cu, Pb, Zn. It is determined its average content in surface sediments of various functional areas (forest and agricultural land, flood deposits, reclaimed land, calculated geochemical criteria, so given ecological and geochemical assessment of area

Overview of engineering design, manufacturing and assembly of JT-60SA machine

Energy Technology Data Exchange (ETDEWEB)

Di Pietro, Enrico, E-mail: enrico.dipietro@jt60sa.org [JT-60SA EU Home Team, Fusion for Energy, Boltzmannstrasse 2, Garching 85748 (Germany); Barabaschi, Pietro [JT-60SA EU Home Team, Fusion for Energy, Boltzmannstrasse 2, Garching 85748 (Germany); Kamada, Yutaka [JT-60SA JA Home Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan); Ishida, Shinichi [JT-60SA JA Project Team, Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2014-10-15

The JT-60SA experiment is one of the three projects to be undertaken in Japan as part of the Broader Approach Agreement, conducted jointly by Europe and Japan, and complementing the construction of ITER in Europe. The JT-60SA device is a fully superconducting tokamak capable of confining break-even equivalent deuterium plasmas with equilibria covering high plasma shaping with a low aspect ratio at a maximum plasma current of I{sub p} = 5.5 MA. This makes JT-60SA capable to support and complement ITER in all the major areas of fusion plasma development necessary to decide DEMO reactor construction. After a complex start-up phase due to the necessity to carry out a re-baselining effort with the purpose to fit in the original budget while aiming to retain the machine mission, performance, and experimental flexibility, in 2009 detailed design could start. With the majority of time-critical industrial contracts in place, in 2012, it was possible to establish a credible time plan, and now, the project is progressing on schedule towards the first plasma in March 2019. After careful and focused R and D and qualification tests, the procurement of the major components and plant is now well advanced in manufacturing design and/or fabrication. In the meantime the disassembly of the JT-60U machine has been completed and the engineering of the JT-60SA assembly process has been developed. The actual assembly of JT-60SA started in January 2013 with the installation of the cryostat base. The paper gives an overview of the present status of the engineering design, manufacturing and assembly of the JT-60SA machine.

Wide-area situation awareness in electric power grid

Science.gov (United States)

Greitzer, Frank L.

2010-04-01

Two primary elements of the US energy policy are demand management and efficiency and renewable sources. Major objectives are clean energy transmission and integration, reliable energy transmission, and grid cyber security. Development of the Smart Grid seeks to achieve these goals by lowering energy costs for consumers, achieving energy independence and reducing greenhouse gas emissions. The Smart Grid is expected to enable real time wide-area situation awareness (SA) for operators. Requirements for wide-area SA have been identified among interoperability standards proposed by the Federal Energy Regulatory Commission and the National Institute of Standards and Technology to ensure smart-grid functionality. Wide-area SA and enhanced decision support and visualization tools are key elements in the transformation to the Smart Grid. This paper discusses human factors research to promote SA in the electric power grid and the Smart Grid. Topics that will be discussed include the role of human factors in meeting US energy policy goals, the impact and challenges for Smart Grid development, and cyber security challenges.

30 CFR 785.19 - Surface coal mining and reclamation operations on areas or adjacent to areas including alluvial...

Science.gov (United States)

2010-07-01

... alluvial valley floor exists if it finds that— (i) Unconsolidated streamlaid deposits holding streams are... on areas or adjacent to areas including alluvial valley floors in the arid and semiarid areas west of....19 Surface coal mining and reclamation operations on areas or adjacent to areas including alluvial...

Intellectual Property and Strategic Agreements (IP/SA) | FNLCR

Science.gov (United States)

What does IP/SA handle? IP/SA handles all invention issues including patents and copyrights. All employee inventionreports are filed through the IP/SA office for all activities under the OTS contract.Additionally,&nbs

Surface modification of cellulose isolated from Sesamun indicum underutilized seed: A means of enhancing cellulose hydrophobicity

Directory of Open Access Journals (Sweden)

Adewale Adewuyi

2017-09-01

Full Text Available Cellulose (SC isolated from sesame seed (SS was surface modified with the introduction of an ester functional group via a simple reaction to produce the modified product (SA. SS, SC and SA were characterized using Fourier transform infrared (FTIR, X-ray diffraction (XRD, thermogravimetric analysis (TG, particle size distribution (PSD, zeta potential and scanning electron microscopy (SEM. SC and SA were evaluated for their water holding capacity (WC, oil holding capacity (OC, swelling capacity (SW and their ability to adsorb heavy metals. The FTIR revealed peaks corresponding to the formation of the ester functional group at the surface of SA. The crystallinity of SC was 28.02% but after the modification, it increased to 77.03% in SA. The PSD of SC and SA was both monomodal with sizes of 10.1305 μm in SC and 10.2511 μm in SA. The adsorption capacity of SC towards Pb (II and Cu (II ions was higher than that of SA. However, SA was unable to adsorb Cu (II ions. SA exhibited the lower WC and SW values as compared to SC which suggested an improved hydrophobicity after the modification. This study has shown that hydrophobicity can be improved in cellulose via surface modification.

Surface analytical characterization of Streptavidin/poly(3-hexylthiophene) bilayers for bio-electronic applications

Science.gov (United States)

Sportelli, M. C.; Picca, R. A.; Manoli, K.; Re, M.; Pesce, E.; Tapfer, L.; Di Franco, C.; Cioffi, N.; Torsi, L.

2017-10-01

The analytical performance of bioelectronic devices is highly influenced by their fabrication methods. In particular, the final architecture of field-effect transistor biosensors combining spin-cast poly(3-hexylthiophene) (P3HT) film and a biomolecule interlayer deposited on a SiO2/Si substrate can lead to the development of highly performing sensing systems, such as for the case of streptavidin (SA) used for biotin sensing. To gain a better understanding of the quality of the interfacial area, critical is the assessment of the morphological features characteristic of the adopted biolayer deposition protocol, namely: the layer-by-layer (LbL) approach and the spin coating technique. The present study relies on a combined surface spectroscopic and morphological characterization. Specifically, X-ray photoelectron spectroscopy operated in the parallel angle-resolved mode allowed the non-destructive investigation of the in-depth chemical composition of the SA film, alone or in the presence of the P3HT overlayer. Spectroscopic data were supported and corroborated by the results obtained with a Scanning Electron and a Helium Ion microscope investigation performed on the SA layer that provided relevant information on the protein structural arrangement or on its surface morphology. Clear differences emerged between the SA layers prepared by the two approaches, with the layer-by-layer deposition resulting in a smoother and better defined bio-electronic interface. Such findings support the superior analytical performance shown by bioelectronic devices based on LbL-deposited protein layers over spin coated ones.

Análise das atividades de educação em saúde realizadas pelas equipes de saúde bucal

Directory of Open Access Journals (Sweden)

Janice Dávila Rodrigues Mendes

2017-03-01

Full Text Available Objetivo: Analisar as atividades de Educação em Saúde realizadas pelas equipes de saúde bucal que estão inseridas na Estratégia Saúde da Família (ESF. Métodos: A pesquisa classificou-se em exploratória e descritiva, com abordagem qualitativa. O referencial teórico de Educação em Saúde utilizado foi a Educação Popular. O estudo foi realizado em Centros de Saúde da Família, Centro de Referência em Assistência Social (CRAS e escolas no município de Sobral, Ceará, Brasil, entre os meses de novembro de 2013 e janeiro de 2014. Participaram do estudo 17 profissionais das equipes de saúde bucal. Os dados foram coletados por meio de entrevista contendo questões norteadoras e observação simples, sendo processados por meio da Análise do Discurso. Resultados: A concepção de Educação em Saúde referida majoritariamente pelos profissionais relaciona-se com o modelo tradicional. As atividades educativas realizadas não são sistematizadas para todo o município e estão condicionadas a programas ministeriais. A integração entre as equipes de saúde bucal e as equipes de saúde da família, no que diz respeito às atividades para escolares, é um processo ainda em construção, não estando consolidado na ESF. Conclusão: É necessário o desenvolvimento de políticas mais intensivas de formação de profissionais de saúde, que considerem a Educação Popular e o uso de metodologias ativas de ensino como método nas suas formações. Este estudo poderá contribuir para uma reflexão a respeito do tema na prática, podendo, assim, possibilitar a construção de um novo olhar sobre a Educação em Saúde.

Long-term studies on the effects of nonvolatile organic compounds on porous media surface areas.

Science.gov (United States)

Khachikian, Crist S; Harmon, Thomas C

2002-01-01

This paper investigates the long-term behavior of porous media contaminated by nonvolatile organic compounds (NVOC) in terms of specific interfacial surface area. Specifically, a natural sand, Moffett sand (MS), was contaminated with naphthalene and the surface area was measured repeatedly over time using nitrogen adsorption-desorption techniques. A field-contaminated sand affected by lamp-black material (LB) from former manufactured gas plant operations was also studied. Lampblack is a carbonaceous skeleton containing polycyclic aromatic hydrocarbons (PAHs) and other hydrocarbons. It is hypothesized that soils contaminated by these types of chemicals will exhibit significantly less surface area than their clean counterparts. The surface areas for the contaminated MS samples increased toward their clean-MS values during the 700-h aging period, but achieved the clean values only after pentane extraction or heating at 60 degrees C. Heating at 50 degrees C failed to achieve a similar recovery of the clean-MS surface area value. Nonspecific mass loss tracked the increase in surface area as indirect evidence that naphthalene loss was the cause of the surface area increase. For the LB samples, aging at 100 degrees C produced a slight decrease in surface area and mass while aging at 250 degrees C caused the surface area to increase roughly threefold while the mass decreased by approximately 1%. These results suggest that, under moderate heating and over the time scale of this investigation, there is a redistribution of the complex contaminant mixture on the solid matrix. Greater temperatures remove mass more efficiently and therefore exhibited the surface area increase expected in this experiment.

Iniquidades raciais e saúde: o ciclo da política de saúde da população negra

Directory of Open Access Journals (Sweden)

Luís Eduardo Batista

Full Text Available Este artigo descreve o ciclo da Política Nacional de Atenção Integral à Saúde da População Negra na Secretaria Estadual de Saúde de São Paulo nos anos de 2003 a 2010. Os estudos epidemiológicos evidenciaram as desigualdades raciais e seu impacto na saúde. A solução encontrada pela SES-SP foi formular e implementar uma política para garantir a atenção à saúde da população negra, inserindo-a no Plano Estadual de Saúde, Planos Operativos Anuais, Termos de Compromisso e Relatório de Gestão. O artigo relata as estratégias, desafios e erros cometidos e sugere caminhos para os gestores que têm interesse em propor ações para redução das iniquidades raciais em saúde.

A method of analyzing rectal surface area irradiated and rectal complications in prostate conformal radiotherapy

International Nuclear Information System (INIS)

Lu Yong; Song, Paul Y.; Li Shidong; Spelbring, Danny R.; Vijayakumar, Srinivasan; Haraf, Daniel J.; Chen, George T.Y.

1995-01-01

Purpose: To develop a method of analyzing rectal surface area irradiated and rectal complications in prostate conformal radiotherapy. Methods and Materials: Dose-surface histograms of the rectum, which state the rectal surface area irradiated to any given dose, were calculated for a group of 27 patients treated with a four-field box technique to a total (tumor minimum) dose ranging from 68 to 70 Gy. Occurrences of rectal toxicities as defined by the Radiation Therapy Oncology Group (RTOG) were recorded and examined in terms of dose and rectal surface area irradiated. For a specified end point of rectal complication, the complication probability was analyzed as a function of dose irradiated to a fixed rectal area, and as a function of area receiving a fixed dose. Lyman's model of normal tissue complication probability (NTCP) was used to fit the data. Results: The observed occurrences of rectal complications appear to depend on the rectal surface area irradiated to a given dose level. The patient distribution of each toxicity grade exhibits a maximum as a function of percentage surface area irradiated, and the maximum moves to higher values of percentage surface area as the toxicity grade increases. The dependence of the NTCP for the specified end point on dose and percentage surface area irradiated was fitted to Lyman's NTCP model with a set of parameters. The curvature of the NTCP as a function of the surface area suggests that the rectum is a parallel structured organ. Conclusions: The described method of analyzing rectal surface area irradiated yields interesting insight into understanding rectal complications in prostate conformal radiotherapy. Application of the method to a larger patient data set has the potential to facilitate the construction of a full dose-surface-complication relationship, which would be most useful in guiding clinical practice

Identification of novel substrates of Shigella T3SA through analysis of its virulence plasmid-encoded secretome

Science.gov (United States)

Pinaud, Laurie; Ferrari, Mariana L.; Friedman, Robin; Jehmlich, Nico; von Bergen, Martin; Phalipon, Armelle; Sansonetti, Philippe J.

2017-01-01

Many human Gram-negative bacterial pathogens express a Type Three Secretion Apparatus (T3SA), including among the most notorious Shigella spp., Salmonella enterica, Yersinia enterocolitica and enteropathogenic Escherichia coli (EPEC). These bacteria express on their surface multiple copies of the T3SA that mediate the delivery into host cells of specific protein substrates critical to pathogenesis. Shigella spp. are Gram-negative bacterial pathogens responsible for human bacillary dysentery. The effector function of several Shigella T3SA substrates has largely been studied but their potential cellular targets are far from having been comprehensively delineated. In addition, it is likely that some T3SA substrates have escaped scrutiny as yet. Indeed, sequencing of the virulence plasmid of Shigella flexneri has revealed numerous open reading frames with unknown functions that could encode additional T3SA substrates. Taking advantage of label-free mass spectrometry detection of proteins secreted by a constitutively secreting strain of S. flexneri, we identified five novel substrates of the T3SA. We further confirmed their secretion through the T3SA and translocation into host cells using β-lactamase assays. The coding sequences of two of these novel T3SA substrates (Orf13 and Orf131a) have a guanine-cytosine content comparable to those of T3SA components and effectors. The three other T3SA substrates identified (Orf48, Orf86 and Orf176) have significant homology with antitoxin moieties of type II Toxin-Antitoxin systems usually implicated in the maintenance of low copy plasmids. While Orf13 and Orf131a might constitute new virulence effectors contributing to S. flexneri pathogenicity, potential roles for the translocation into host cells of antitoxins or antitoxin-like proteins during Shigella infection are discussed. PMID:29073283

Identification of novel substrates of Shigella T3SA through analysis of its virulence plasmid-encoded secretome.

Directory of Open Access Journals (Sweden)

Laurie Pinaud

Full Text Available Many human Gram-negative bacterial pathogens express a Type Three Secretion Apparatus (T3SA, including among the most notorious Shigella spp., Salmonella enterica, Yersinia enterocolitica and enteropathogenic Escherichia coli (EPEC. These bacteria express on their surface multiple copies of the T3SA that mediate the delivery into host cells of specific protein substrates critical to pathogenesis. Shigella spp. are Gram-negative bacterial pathogens responsible for human bacillary dysentery. The effector function of several Shigella T3SA substrates has largely been studied but their potential cellular targets are far from having been comprehensively delineated. In addition, it is likely that some T3SA substrates have escaped scrutiny as yet. Indeed, sequencing of the virulence plasmid of Shigella flexneri has revealed numerous open reading frames with unknown functions that could encode additional T3SA substrates. Taking advantage of label-free mass spectrometry detection of proteins secreted by a constitutively secreting strain of S. flexneri, we identified five novel substrates of the T3SA. We further confirmed their secretion through the T3SA and translocation into host cells using β-lactamase assays. The coding sequences of two of these novel T3SA substrates (Orf13 and Orf131a have a guanine-cytosine content comparable to those of T3SA components and effectors. The three other T3SA substrates identified (Orf48, Orf86 and Orf176 have significant homology with antitoxin moieties of type II Toxin-Antitoxin systems usually implicated in the maintenance of low copy plasmids. While Orf13 and Orf131a might constitute new virulence effectors contributing to S. flexneri pathogenicity, potential roles for the translocation into host cells of antitoxins or antitoxin-like proteins during Shigella infection are discussed.

Intimidade e saúde

Directory of Open Access Journals (Sweden)

Lígia Maria Moreira Ferreira de Almeida

2012-12-01

Full Text Available A intimidade é antecedida de processos ativos, transversais ao ciclo de vida. O vínculo afetivo estabelece-se primariamente na relação de vinculação mãe-bebê, e os padrões comportamentais e estilos de vinculação tendem a repercutir-se nas relações adultas. O objetivo exploratório desta investigação pretende apurar a transcrição física (consequências na saúde de vivências insatisfatórias de intimidade. Sessenta universitários (30 do sexo feminino; 30 do sexo masculino, com idades entre 22 e 27 anos, envolvidos numa relação amorosa fixa (duração mínima: 6 meses foram contactados para responder a uma bateria de instrumentos (variáveis de interesse: intimidade, identidade, autoconceito e vinculação. Um bom estado de saúde parece associar-se a valores elevados de interdependência e baixos valores de dependência na relação amorosa. Nestes jovens a intimidade baseada na dependência compromete 14% da saúde mental. O impacto de uma intimidade pouco saudável limita em quase 9% a saúde física de jovens adultos saudáveis.

SA Rugby

African Journals Online (AJOL)

Kathryn van Boom

(SA Rugby) Youth Week players: a pilot study. J Brown,1,2 ... management guidelines, to which all rugby-playing nations need to ... Consensus Statement for Concussion in Sport [1] and World. Rugby's ... Players with a “time-loss” injury (an ...

High-surface-area active carbon

International Nuclear Information System (INIS)

O'Grady, T.M.; Wennerberg, A.N.

1986-01-01

This paper describes the preparation and properties of a unique active carbon having exceptionally high surface areas, over 2500 m 2 /gm, and extraordinary adsorptive capacities. The carbon is made by a direct chemical activation route in which petroleum coke or other carbonaceous sources are reacted with excess potassium hydroxide at 400 0 to 500 0 C to an intermediate product that is subsequently pyrolyzed at 800 0 to 900 0 C to active carbon containing potassium salts. These are removed by water washing and the carbon is dried to produce a powdered product. A granular carbon can also be made by further processing the powdered carbon by using specialized granulation techniques. Typical properties of the carbon include Iodine Numbers of 3000 to 3600, methylene blue adsorption of 650 to 750 mg/gm, pore volumes of 2.0 to 2.6 cc/gm and less than 3.0% ash. This carbon's high adsorption capacities make it uniquely suited for numerous demanding applications in the medical area, purifications, removal of toxic substances, as catalyst carriers, etc

Strategicheskiy analiz predpriyatiy Nestle S.A

OpenAIRE

Nazarova, Daria

2017-01-01

The subject of the research of the bachelor's thesis is the organization and the application of individual tools of strategic analysis. The object of the research is the Nestle SA enterprise in Russia. The aim of the work is to study the tools of strategic analysis of the enterprise Nestle SA in Russia to develop proposals for improving the strategy. "Nestle SA" is the world's largest concern for food production. The company was founded in distant 1866, by the Swiss pharmacist Henri-Henry Nes...

Spectral theory of infinite-area hyperbolic surfaces

CERN Document Server

Borthwick, David

2016-01-01

This text introduces geometric spectral theory in the context of infinite-area Riemann surfaces, providing a comprehensive account of the most recent developments in the field. For the second edition the context has been extended to general surfaces with hyperbolic ends, which provides a natural setting for development of the spectral theory while still keeping technical difficulties to a minimum. All of the material from the first edition is included and updated, and new sections have been added. Topics covered include an introduction to the geometry of hyperbolic surfaces, analysis of the resolvent of the Laplacian, scattering theory, resonances and scattering poles, the Selberg zeta function, the Poisson formula, distribution of resonances, the inverse scattering problem, Patterson-Sullivan theory, and the dynamical approach to the zeta function. The new sections cover the latest developments in the field, including the spectral gap, resonance asymptotics near the critical line, and sharp geometric constan...

Electrochemical Properties of High Surface Area Vanadium Oxide Aerogels

National Research Council Canada - National Science Library

Dong, Winny

2001-01-01

.... Traditional composite electrode structures have prevented truly quantitative analysis of surface area effects in nanoscale battery materials, as well as a study of their innate electrochemical behavior...

An optimal adder-based hardware architecture for the DCT/SA-DCT

Science.gov (United States)

Kinane, Andrew; Muresan, Valentin; O'Connor, Noel

2005-07-01

The explosive growth of the mobile multimedia industry has accentuated the need for ecient VLSI implemen- tations of the associated computationally demanding signal processing algorithms. This need becomes greater as end-users demand increasingly enhanced features and more advanced underpinning video analysis. One such feature is object-based video processing as supported by MPEG-4 core profile, which allows content-based in- teractivity. MPEG-4 has many computationally demanding underlying algorithms, an example of which is the Shape Adaptive Discrete Cosine Transform (SA-DCT). The dynamic nature of the SA-DCT processing steps pose significant VLSI implementation challenges and many of the previously proposed approaches use area and power consumptive multipliers. Most also ignore the subtleties of the packing steps and manipulation of the shape information. We propose a new multiplier-less serial datapath based solely on adders and multiplexers to improve area and power. The adder cost is minimised by employing resource re-use methods. The number of (physical) adders used has been derived using a common sub-expression elimination algorithm. Additional energy eciency is factored into the design by employing guarded evaluation and local clock gating. Our design implements the SA-DCT packing with minimal switching using ecient addressing logic with a transpose mem- ory RAM. The entire design has been synthesized using TSMC 0.09µm TCBN90LP technology yielding a gate count of 12028 for the datapath and its control logic.

Assessment of Surface Area Characteristics of Dental Implants with Gradual Bioactive Surface Treatment

Science.gov (United States)

Czan, Andrej; Babík, Ondrej; Miklos, Matej; Záušková, Lucia; Mezencevová, Viktória

2017-10-01

Since most of the implant surface is in direct contact with bone tissue, shape and integrity of said surface has great influence on successful osseointegration. Among other characteristics that predetermine titanium of different grades of pureness as ideal biomaterial, titanium shows high mechanical strength making precise miniature machining increasingly difficult. Current titanium-based implants are often anodized due to colour coding. This anodized layer has important functional properties for right usage and also bio-compatibility of dental implants. Physical method of anodizing and usage of anodizing mediums has a significant influence on the surface quality and itself functionality. However, basic requirement of the dental implant with satisfactory properties is quality of machined surface before anodizing. Roughness, for example, is factor affecting of time length of anodizing operation and so whole productivity. The paper is focused on monitoring of surface and area characteristics, such as roughness or surface integrity after different cutting conditions of miniature machining of dental implants and their impact on suitability for creation of satisfactory anodized layer with the correct biocompatible functional properties.

Programa Saúde da Família: viabilizando a saúde pública universalizada no Brasil

Directory of Open Access Journals (Sweden)

Fuhrmann, Nadia Lucia

2003-01-01

Full Text Available O tema exposto neste artigo aborda a implantação do Programa Saúde da Família como estratégia de conversão do Sistema de Saúde no Brasil. No campo da saúde pública, o PSF configura-se, atualmente, na mais ampla política assistencial do setor. Está disseminado por todo o território nacional, tendo como meta principal reorganizar os serviços e ações em saúde ao nível da atenção primária. Elegemos três aspectos que nos parecem centrais para o entendimento do processo de implantação do PSF nos municípios brasileiros, a saber: a origem e os antecedentes do Programa, a implantação e o impacto desse Projeto no nível local e, finalmente, a especificidade da formação das equipes multiprofissionais que constituem as unidades de saúde. Buscamos, assim, socializar parte dos estudos que temos realizado sobre o PSF, desde 1997, no Núcleo de Pesquisas em Demandas e Políticas Sociais no Programa de Pós-Graduação em Serviço Social da PUCRS

Relationship among land surface temperature and LUCC, NDVI in typical karst area.

Science.gov (United States)

Deng, Yuanhong; Wang, Shijie; Bai, Xiaoyong; Tian, Yichao; Wu, Luhua; Xiao, Jianyong; Chen, Fei; Qian, Qinghuan

2018-01-12

Land surface temperature (LST) can reflect the land surface water-heat exchange process comprehensively, which is considerably significant to the study of environmental change. However, research about LST in karst mountain areas with complex topography is scarce. Therefore, we retrieved the LST in a karst mountain area from Landsat 8 data and explored its relationships with LUCC and NDVI. The results showed that LST of the study area was noticeably affected by altitude and underlying surface type. In summer, abnormal high-temperature zones were observed in the study area, perhaps due to karst rocky desertification. LSTs among different land use types significantly differed with the highest in construction land and the lowest in woodland. The spatial distributions of NDVI and LST exhibited opposite patterns. Under the spatial combination of different land use types, the LST-NDVI feature space showed an obtuse-angled triangle shape and showed a negative linear correlation after removing water body data. In summary, the LST can be retrieved well by the atmospheric correction model from Landsat 8 data. Moreover, the LST of the karst mountain area is controlled by altitude, underlying surface type and aspect. This study provides a reference for land use planning, ecological environment restoration in karst areas.

Applying spatial analysis tools in public health: an example using SaTScan to detect geographic targets for colorectal cancer screening interventions.

Science.gov (United States)

Sherman, Recinda L; Henry, Kevin A; Tannenbaum, Stacey L; Feaster, Daniel J; Kobetz, Erin; Lee, David J

2014-03-20

Epidemiologists are gradually incorporating spatial analysis into health-related research as geocoded cases of disease become widely available and health-focused geospatial computer applications are developed. One health-focused application of spatial analysis is cluster detection. Using cluster detection to identify geographic areas with high-risk populations and then screening those populations for disease can improve cancer control. SaTScan is a free cluster-detection software application used by epidemiologists around the world to describe spatial clusters of infectious and chronic disease, as well as disease vectors and risk factors. The objectives of this article are to describe how spatial analysis can be used in cancer control to detect geographic areas in need of colorectal cancer screening intervention, identify issues commonly encountered by SaTScan users, detail how to select the appropriate methods for using SaTScan, and explain how method selection can affect results. As an example, we used various methods to detect areas in Florida where the population is at high risk for late-stage diagnosis of colorectal cancer. We found that much of our analysis was underpowered and that no single method detected all clusters of statistical or public health significance. However, all methods detected 1 area as high risk; this area is potentially a priority area for a screening intervention. Cluster detection can be incorporated into routine public health operations, but the challenge is to identify areas in which the burden of disease can be alleviated through public health intervention. Reliance on SaTScan's default settings does not always produce pertinent results.

Comparison of diffusion charging and mobility-based methods for measurement of aerosol agglomerate surface area.

Science.gov (United States)

Ku, Bon Ki; Kulkarni, Pramod

2012-05-01

We compare different approaches to measure surface area of aerosol agglomerates. The objective was to compare field methods, such as mobility and diffusion charging based approaches, with laboratory approach, such as Brunauer, Emmett, Teller (BET) method used for bulk powder samples. To allow intercomparison of various surface area measurements, we defined 'geometric surface area' of agglomerates (assuming agglomerates are made up of ideal spheres), and compared various surface area measurements to the geometric surface area. Four different approaches for measuring surface area of agglomerate particles in the size range of 60-350 nm were compared using (i) diffusion charging-based sensors from three different manufacturers, (ii) mobility diameter of an agglomerate, (iii) mobility diameter of an agglomerate assuming a linear chain morphology with uniform primary particle size, and (iv) surface area estimation based on tandem mobility-mass measurement and microscopy. Our results indicate that the tandem mobility-mass measurement, which can be applied directly to airborne particles unlike the BET method, agrees well with the BET method. It was also shown that the three diffusion charging-based surface area measurements of silver agglomerates were similar within a factor of 2 and were lower than those obtained from the tandem mobility-mass and microscopy method by a factor of 3-10 in the size range studied. Surface area estimated using the mobility diameter depended on the structure or morphology of the agglomerate with significant underestimation at high fractal dimensions approaching 3.

Gasto privado com saúde por classes de renda

Directory of Open Access Journals (Sweden)

KILSZTAJN SAMUEL

2002-01-01

Full Text Available OBJETIVO: O artigo analisa a participação do gasto privado com saúde das famílias no PIB e no total da renda familiar per capita e a distribuição do gasto privado com saúde das famílias por classes de renda. MÉTODOS: A pesquisa utilizou os microdados da Pesquisa Nacional por Amostra de Domicílios de 1998, com a divisão da população em quatro classes de renda familiar per capita e a distribuição dos gastos em planos de saúde, consultas médicas, consultas com outros profissionais de saúde, exames, medicamentos, artigos ortopédicos e aparelhos médicos, óculos e lentes, odontologia, hospitais, enfermagem domiciliar e outros gastos com saúde. RESULTADOS: Apenas 7,2% da população com renda familiar per capita até 1 salário mínimo em 1998 tinha direito a algum plano de saúde, e o gasto privado com saúde das famílias desta classe, que representava 52,5% da população, era em média de R$ 5,36 por pessoa. Para as pessoas com renda familiar per capita acima de 9 salários mínimos, os planos de saúde atingiam 83,2% da população e o gasto privado com saúde das famílias R$ 133,04. CONCLUSÕES: A implantação do Sistema Único de Saúde foi acompanhada pelo crescimento expressivo dos planos de saúde nos anos 90. Mesmo se todo o gasto público com saúde fosse destinado à população sem planos de saúde, ainda assim o gasto destas pessoas em 1998 só alcançaria R$ 352,62, ou seja, 43% do gasto com saúde das pessoas com planos, R$ 819,08.

Cobertura de Planos de Saúde na população brasileira, segundo a Pesquisa Nacional de Saúde, 2013

Directory of Open Access Journals (Sweden)

Deborah Carvalho Malta

Full Text Available Resumo O objetivo do estudo é descrever as coberturas de planos de saúde no Brasil, conforme características sociodemográficas, a partir dos dados da Pesquisa Nacional de Saúde, realizada em 2013, e comparar com dados administrativos da Agencia Nacional de Saúde Suplementar para este mesmo ano. Foram utilizados dados da Pesquisa Nacional de Saúde e do Sistema de Informações de Beneficiários da Agência Nacional de Saúde para o ano de 2013. Foi descrita a cobertura dos planos de saúde segundo estratificação para Brasil, urbano/rural, Grandes Regiões, Unidades da Federação e Capitais, sexo, faixa etária, nível de instrução, posição na força de trabalho, cor/raça e estado de saúde. Como resultado, a proporção de pessoas que referiu ter algum plano de saúde no Brasil foi de 27,9% (IC95%: 27,1-28,8. Foi observada diferença significativa com relação a nível de instrução, sendo maior para os que referiram ter educação superior completa (68,8% IC95%: 67,2-70,4 e para aqueles que referiram ter ocupação (32,5% IC95%: 31,5-33,5. O aumento da cobertura de planos de saúde na população brasileira reflete a melhora da oferta de empregos e do crescimento da economia do país na época.

Homossexualidade e o direito à saúde: um desafio para as políticas públicas de saúde no Brasil

Directory of Open Access Journals (Sweden)

Grayce Alencar Albuquerque

Full Text Available Objetivou-se evidenciar a atuação das políticas públicas direcionadas à saúde da população homossexual brasileira. Trata-se de uma revisão integrativa da literatura, realizada na Scientific Eletronic Library Online (SciELO e na Literatura Latino-Americana e do Caribe em Ciências da Saúde (Lilacs, utilizando os Decs: políticas públicas, assistência integral à saúde e homossexualidade. A saúde LGBT é apontada como vulnerável mesmo após a publicação de importantes documentos que garantem o acesso e a inclusão do grupo na saúde. A fragilidade na efetivação das propostas preconizadas vão ao encontro ao atendimento discriminatório e heteronormativo prestado pelos profissionais de saúde.

On semiautomatic estimation of surface area

DEFF Research Database (Denmark)

Dvorak, J.; Jensen, Eva B. Vedel

2013-01-01

and the surfactor. For ellipsoidal particles, it is shown that the flower estimator is equal to the pivotal estimator based on support function measurements along four perpendicular rays. This result makes the pivotal estimator a powerful approximation to the flower estimator. In a simulation study of prolate....... If the segmentation is correct the estimate is computed automatically, otherwise the expert performs the necessary measurements manually. In case of convex particles we suggest to base the semiautomatic estimation on the so-called flower estimator, a new local stereological estimator of particle surface area....... For convex particles, the estimator is equal to four times the area of the support set (flower set) of the particle transect. We study the statistical properties of the flower estimator and compare its performance to that of two discretizations of the flower estimator, namely the pivotal estimator...

Revista de Saúde Pública: 50 years disseminating the knowledge in nutrition

Directory of Open Access Journals (Sweden)

Rosely Sichieri

Full Text Available ABSTRACT This work describes and comments on articles in the area of Public Health Nutrition published in Revista de Saúde Pública (RSP – Public Health Journal from 1967 to 2016. We searched in the PubMed database restricted to the periodical “Revista de Saúde Pública” and using terms related to key topics in the area of Public Health Nutrition. We retrieved 742 articles and, after exclusion of duplicates and articles unrelated to the subject, we analyzed 441 articles, grouped according to subject: dental caries, anemia, hypovitaminosis A, macro/micronutrients, malnutrition, nutritional assessment, overweight/obesity, food consumption, low birthweight, and breastfeeding. We observed significant increase in the number of articles published and diversification of subjects addressed over the 50 years, representing the consistent development of the scientific field of Nutrition in Brazil. Since its inception, RSP has played an important role in the dissemination of knowledge about the main nutritional issues in Brazil.

Intervenções em saúde pública e seu impacto nas desigualdades sociais em saúde

Directory of Open Access Journals (Sweden)

José Leopoldo Ferreira Antunes

2015-06-01

Full Text Available Este artigo resume a avaliação de três programas de saúde pública em relação à sua eficácia e impacto sobre as desigualdades sociais na saúde. Foram examinadas a fluoração da água de abastecimento público no contexto brasileiro, a provisão de terapêutica antirretroviral para pacientes com Aids e a vacinação de idosos contra a gripe na cidade de São Paulo. As três intervenções foram consideradas efetivas, na medida em que propiciaram uma redução na carga de doença na população. No entanto, elas tiveram resultados conflitantes quanto ao impacto sobre as desigualdades em saúde. Concluiu-se, por fim, que os programas de saúde pública devem ser implementados com um alcance imediata e efetivamente universal, direcionando recursos adicionais aos grupos com mais necessidades de saúde. Essa estratégia reduziria, ao mesmo tempo, o nível geral de doença na população e as desigualdades na experiência de doenças entre os estratos sociais.

Digital photography and transparency-based methods for measuring wound surface area.

Science.gov (United States)

Bhedi, Amul; Saxena, Atul K; Gadani, Ravi; Patel, Ritesh

2013-04-01

To compare and determine a credible method of measurement of wound surface area by linear, transparency, and photographic methods for monitoring progress of wound healing accurately and ascertaining whether these methods are significantly different. From April 2005 to December 2006, 40 patients (30 men, 5 women, 5 children) admitted to the surgical ward of Shree Sayaji General Hospital, Baroda, had clean as well as infected wound following trauma, debridement, pressure sore, venous ulcer, and incision and drainage. Wound surface areas were measured by these three methods (linear, transparency, and photographic methods) simultaneously on alternate days. The linear method is statistically and significantly different from transparency and photographic methods (P value transparency and photographic methods (P value >0.05). Photographic and transparency methods provided measurements of wound surface area with equivalent result and there was no statistically significant difference between these two methods.

Gênero e qualidade de vida percebida: estudo com professores da área de saúde Gender and perceived quality of life: research with professors from the health area

Directory of Open Access Journals (Sweden)

Elizabete Regina Araújo de Oliveira

2012-03-01

Full Text Available O rápido processo de mudanças na economia global nos últimos anos e a organização do trabalho configuram as relações de gênero no trabalho docente. Essas transformações têm favorecido a situação desvantajosa da mulher, deixando-a em uma situação de sobrecarga ocupacional. Foram analisadas as condições de trabalho de Professoras do ensino superior da área da saúde em Vitória, no Estado do Espírito Santo, e suas implicações sobre a saúde e qualidade de vida. Trata-se de uma pesquisa de abordagem qualitativa. A coleta de dados foi realizada através de entrevistas e para a análise empregou-se a análise de conteúdo de Bardin, possibilitando a abordagem de três categorias: lazer, descanso e saúde; sentimentos de perda da interação social e familiar; e qualidade de vida percebida. Os resultados apresentam relatos relacionados à ausência de lazer com consequentes distúrbios do sono favorecendo doenças psíquicas; excesso de trabalho; alterações significativas na forma de organização do mesmo, comprometimento da interação social e familiar, com influência sobre a saúde e a qualidade de vida. O trabalho executado pelas professoras da área da saúde contribui para o desenvolvimento do processo de adoecimento, com influência sobre a sua vida familiar, amorosa, social, ambiental e profissional, com perda da qualidade de vida.The rapid process of change in the global economy in recent years and the organization of labor have influenced gender relations in the teaching profession. These transformations have been disadvantageous for women, leaving them in a situation of occupational overload. The scope of this study was to analyze the working conditions of female teachers in higher education in the health education area in the city of Vitória, State Espírito Santo, and their implications on health and quality of life. This is qualitative research into data gathered from interviews upon which Bardin content

Surface characterization of modern resin composites: a multitechnique approach.

Science.gov (United States)

Silikas, Nick; Kavvadia, Katerina; Eliades, George; Watts, David

2005-04-01

To characterize the surface properties of some modern resin composites employing a series of physicochemical methods. Specimens from three microhybrid (Palfique Estellite-PE, Z250 Filtek-ZF, Tetric Ceram-TC) and one nanofilled (Supreme Filtek-SF) conventionally photo-cured resin composites polished with Soflex disks were studied for the following properties: Surface chemical composition and degree of C=C conversion (FTIR), surface energetics (contact angles), surface texture (AFM), surface roughness (AFM, stylus profilometry) and gloss (60 degrees-, 20 degrees-angle specular gloss). Polar and non polar molecular groups were identified in all products including NH and CONH (SF, ZF, TC). SF and ZF demonstrated higher conversion than PE and TC (P 0.05) were found in critical surface tension, total work of adhesion and its polar and dispersion components, the latter being the highest in all products. AFM showed the smoothest surface texture in PE. The ranking of Sa, Sq, Ra and Rz roughness parameters was PEgloss measurements (PE, SF>ZF>TC, PTC, Pgloss differences. A positive correlation was found between Sa and Ra and a negative one between Sa and 20 degree-angle gloss.

Cross-cultural adaptation and validation of the South African Pain Catastrophizing Scale (SA-PCS among patients with fibromyalgia

Directory of Open Access Journals (Sweden)

Morris Linzette D

2012-11-01

Full Text Available Abstract Background Pain catastrophization has recently been recognized as a barrier to the healthy development of physical functioning among chronic pain patients. Levels of pain catastrophization in chronic pain patients are commonly measured using the Pain Catastrophizing Scale (PCS. Objective To cross-culturally adapt and validate the South African PCS (SA-PCS among English-, Afrikaans- and Xhosa-speaking patients with fibromyalgia living in the Cape Metropole area, Western Cape, South Africa. Methods The original PCS was cross-culturally adapted in accordance with international standards to develop an English, Afrikaans and Xhosa version of the SA-PCS using a repeated measures study design. Psychometric testing included face/content validity, internal consistency (Cronbach’s alpha-α, test-retest reliability (intraclass coefficient correlations-ICC, sensitivity-to-change and cross-sectional convergent validity (by comparing the adapted SA-PCS to related constructs. Results The cross-culturally adapted English, Afrikaans and Xhosa SA-PCS showed good face and content validity, excellent internal consistency (with Chronbach’s α = 0.98, 0.98 and 0.97 for the English, Afrikaans and Xhosa SA-PCS, as a whole, respectively, excellent test-retest reliability (with ICC’s of 0.90, 0.91 and 0.89 for the English, Afrikaans and Xhosa SA-PCS, respectively; as well as satisfactory sensitivity-to-change (with a minimum detectable change of 8.8, 9.0 and 9.3 for the English, Afrikaans and Xhosa SA-PCS, respectively and cross-sectional convergent validity (when compared to pain severity as well as South African versions of the Tampa scale for Kinesiophobia and the revised Fibromyalgia Impact Questionnaire. Conclusion The SA-PCS can therefore be recommended as simple, efficient, valid and reliable tool which shows satisfactory sensitivity-to-change and cross-sectional convergent validity, for use among English, Afrikaans and Xhosa-speaking patients with

A inserção da vigilância em saúde ambiental no sistema único de saúde

Directory of Open Access Journals (Sweden)

Edenilo Baltazar Barreira Filho

2012-03-01

Full Text Available A inserção das atividades de vigilância ambiental no SUS apresenta algumas características que se diferenciam das práticas de vigilância epidemiológica. Isto ocorre principalmente em decorrência de que muitos dados sobre a exposição aos fatores ambientais são obtidos fora do setor saúde e a adoção de ações que busquem controlar e/ou prevenir exigem, na grande maioria dos casos, uma compreensãoe articulação intra e intersetorial, pois o setor saúde não é capaz de, sozinho, dar respostas as questões de saúde ambiental.Nos últimos anos vem consolidando-se cada vez mais o campo da saúdeambiental, que compreende a área da saúde pública, afeita ao conhecimento científico, à formulação de políticas públicas e às correspondentes intervenções (ações relacionadas à interação entre a saúde humana e os fatores do meio ambiente natural e antrópico que a determinam, condicionam e influenciam, com vistas a melhorar a qualidade de vida do ser humano sob o ponto de vista dasustentabilidade(1.Conforme entendimento acordado no I Seminário da Política Nacional de Saúde Ambiental, realizado em outubro de 2005, e consolidado na primeira Conferência Nacional de Saúde Ambiental, realizada em dezembro de 2009, compreende-se como uma área de práticas intersetoriais e transdisciplinares voltadas aos reflexos, na saúde humana, das relações ecogeossociais do homem com o ambiente(1.Nesse sentido, o Ministério da Saúde vem implementando em todo o território nacional um Sistema de Vigilância em Saúde Ambiental (SINVISA, buscando o aprimoramento deste “modelo” de atuação e estabelecendo competências nas três esferas de gestão, com o objetivo de consolidar a prática da Saúde Ambiental dentro do SUS.A Instrução Normativa nº 1, de 7 de março de 2005, cria o SINVISA, estabelece a área de atuação, as competências para as três esferas de Gestão do SUS e define a Vigilância em Saúde Ambiental como sendo

Percepção do processo saúde-doença: significados e valores da educação em saúde

Directory of Open Access Journals (Sweden)

Ana Maria Chagas Sette Câmara

Full Text Available A relevância sociológica do estudo das representações sociais do processo saúde-doença está no fato de que elas fundamentam práticas e atitudes dos seus atores, assim como as relações que eles estabelecem com o seu contexto social e com aquilo que lhes acontece. O problema dessa pesquisa consiste em conhecer as representações sociais do processo saúde-doença dos profissionais do PSF, considerando que esse conhecimento pode ser fundamental para o desenvolvimento de práticas educativas em saúde. A abordagem metodológica desta pesquisa foi qualitativa, tendo por base as representações sociais dos profissionais de apoio e das equipes de saúde da família do Centro de Saúde Milionários, em Belo Horizonte, Minas Gerais. Para a coleta de dados, foi utilizada entrevista individual semi-estruturada abordando os seguintes aspectos: processo saúde-doença; educação em saúde; e barreiras ou dificuldades para prescrição/adoção de hábitos saudáveis. Os dados foram analisados pela técnica de análise de conteúdo, a partir das categorias: dimensões do processo saúde-doença; barreiras ou dificuldades para adoção de hábitos saudáveis; e significados e valores da educação em saúde. Os dados apontam que há necessidade de modificações conceituais na formação permanente desses profissionais e da inclusão do enfoque coletivo, abordando o conceito ampliado de saúde com seus determinantes sociais e contextuais. Faz-se necessária também a busca de novas metodologias de educação em saúde, para que os profissionais do PSF possam ir além da informação e consigam a ressignificação dos conceitos do processo saúde-doença, podendo de fato estabelecer novas práticas e novos processos de trabalho em saúde.

Technology of surface wastewater purification, including high-rise construction areas

Science.gov (United States)

Tsyba, Anna; Skolubovich, Yury

2018-03-01

Despite on the improvements in the quality of high-rise construction areas and industrial wastewater treatment, the pollution of water bodies continues to increase. This is due to the organized and unorganized surface untreated sewage entry into the reservoirs. The qualitative analysis of some cities' surface sewage composition is carried out in the work. Based on the published literature review, the characteristic contamination present in surface wastewater was identified. The paper proposes a new technology for the treatment of surface sewage and presents the results of preliminary studies.

Contribuições do PET-Saúde/Redes de Atenção Psicossocial à Saúde da Família

Directory of Open Access Journals (Sweden)

Larissa de Almeida Rézio

2015-12-01

Full Text Available O estudo objetivou analisar as contribuições do Programa de Educação pelo Trabalho para a Saúde – PET-Saúde/Redes de Atenção Psicossocial à Saúde - a uma unidade de Estratégia de Saúde da Família em Cuiabá, Mato Grosso, Brasil. Trata-se de um estudo descritivo, com abordagem qualitativa, utilizando entrevista com cinco profissionais de saúde e dois acadêmicos bolsistas e registros de atividades realizadas no serviço. À luz da análise de conteúdo temática, sistematizamos quatro subtemas: “articulação da rede”; “qualificação da assistência à saúde mental”, “melhora do conhecimento dos profissionais” e “superação de estigmas sobre o paciente em sofrimento psíquico”. Houve sensibilização dos profissionais e bolsistas sobre a importância do acompanhamento das pessoas com sofrimento mental na atenção básica, em articulação com serviços de saúde mental.

Nanoporous Ni with High Surface Area for Potential Hydrogen Storage Application.

Science.gov (United States)

Zhou, Xiaocao; Zhao, Haibo; Fu, Zhibing; Qu, Jing; Zhong, Minglong; Yang, Xi; Yi, Yong; Wang, Chaoyang

2018-06-01

Nanoporous metals with considerable specific surface areas and hierarchical pore structures exhibit promising applications in the field of hydrogen storage, electrocatalysis, and fuel cells. In this manuscript, a facile method is demonstrated for fabricating nanoporous Ni with a high surface area by using SiO₂ aerogel as a template, i.e., electroless plating of Ni into an SiO₂ aerogel template followed by removal of the template at moderate conditions. The effects of the prepared conditions, including the electroless plating time, temperature of the structure, and the magnetism of nanoporous Ni are investigated in detail. The resultant optimum nanoporous Ni with a special 3D flower-like structure exhibited a high specific surface area of about 120.5 m²/g. The special nanoporous Ni exhibited a promising prospect in the field of hydrogen storage, with a hydrogen capacity of 0.45 wt % on 4.5 MPa at room temperature.

Evaluating polymer degradation with complex mixtures using a simplified surface area method.

Science.gov (United States)

Steele, Kandace M; Pelham, Todd; Phalen, Robert N

2017-09-01

Chemical-resistant gloves, designed to protect workers from chemical hazards, are made from a variety of polymer materials such as plastic, rubber, and synthetic rubber. One material does not provide protection against all chemicals, thus proper polymer selection is critical. Standardized testing, such as chemical degradation tests, are used to aid in the selection process. The current methods of degradation ratings based on changes in weight or tensile properties can be expensive and data often do not exist for complex chemical mixtures. There are hundreds of thousands of chemical products on the market that do not have chemical resistance data for polymer selection. The method described in this study provides an inexpensive alternative to gravimetric analysis. This method uses surface area change to evaluate degradation of a polymer material. Degradation tests for 5 polymer types against 50 complex mixtures were conducted using both gravimetric and surface area methods. The percent change data were compared between the two methods. The resulting regression line was y = 0.48x + 0.019, in units of percent, and the Pearson correlation coefficient was r = 0.9537 (p ≤ 0.05), which indicated a strong correlation between percent weight change and percent surface area change. On average, the percent change for surface area was about half that of the weight change. Using this information, an equivalent rating system was developed for determining the chemical degradation of polymer gloves using surface area.

Planejamento, gestão e ações à saúde do homem na estratégia de saúde da família

Directory of Open Access Journals (Sweden)

Leonardo Peixoto Pereira

2014-12-01

Full Text Available Objetivo: Analisar a situação do planejamento, da gestão e das ações de saúde diante da perspectiva de implantação da Política de Atenção à Saúde do Homem na Estratégia de Saúde da Família no município de Jequié. Métodos: Tratou-se de um estudo qualitativo. Entrevistaram-se gestores municipais dos serviços de saúde, profissionais de saúde da Estratégia de Saúde da Família e homens com 25 a 59 anos residentes nas áreas adscritas das unidades de saúde estudadas; realizou-se análise documental do Plano de Saúde e Relatórios de Gestão na Secretaria Municipal de Saúde e análise de conteúdo, modalidade temática. Resultados: Não há atividades assistenciais; de prevenção e promoção à saúde masculina desenvolvidas e os processos de implantação da atenção à saúde do homem encontram-se incipientes. Conclusão: É preciso ampliar o diálogo e reorganizar as estratégias de planejamento e gestão para compreender as reais necessidades masculina e articular com os atores envolvidos a implantação das ações de atenção à saúde do homem.

O agente comunitário de saúde pública: a proposta de Manguinhos

Directory of Open Access Journals (Sweden)

Karen Giffin

1989-01-01

Full Text Available O artigo descreve a implantação de um trabalho de atenção primária à saúde em favelas do Rio de Janeiro Agentes de saúde das comunidades atendidas, cada uma responsável por uma população de aproximadamente 2000 pessoas, trabalham dentro de um modelo operacional que inclui visitas domiciliares contínuas às famílias e trabalho em grupos de mulheres e de gestantes. As ações básicas desenvolvidas neste período inicial representam uma extensão de cobertura do Programa de Assistência Integral à Saúde da Mulher e da Criança. A segunda parte do artigo discute alguns pontos polêmicos relacionados com a conceituação deste modelo de atuação, que promove tanto uma melhoria no estado de saúde como o desenvolvimento social.This article describes the implantation of an innovative proposal for primary health care in squatter areas of Rio de Janeiro. Community health agents, each of whom is responsible for an area of approximately 2000 inhabitants, work within an operational model which includes continuous home visits and work with groups of women and expectant mothers. The basic actions, in this initial period, represent an extension of coverage of the Programme for Integral Health Care for Women and Children. The second part of the article discusses some of the polemical points related to this delivery model, which promotes both an improvement in health and social development.

Ethylene induced plant stress tolerance by Enterobacter sp. SA187 is mediated by 2‐keto‐4‐methylthiobutyric acid production

KAUST Repository

Zélicourt, Axel de

2018-03-19

Several plant species require microbial associations for survival under different biotic and abiotic stresses. In this study, we show that Enterobacter sp. SA187, a desert plant endophytic bacterium, enhances yield of the crop plant alfalfa under field conditions as well as growth of the model plant Arabidopsis thaliana in vitro, revealing a high potential of SA187 as a biological solution for improving crop production. Studying the SA187 interaction with Arabidopsis, we uncovered a number of mechanisms related to the beneficial association of SA187 with plants. SA187 colonizes both the surface and inner tissues of Arabidopsis roots and shoots. SA187 induces salt stress tolerance by production of bacterial 2-keto-4-methylthiobutyric acid (KMBA), known to be converted into ethylene. By transcriptomic, genetic and pharmacological analyses, we show that the ethylene signaling pathway, but not plant ethylene production, is required for KMBA-induced plant salt stress tolerance. These results reveal a novel molecular communication process during the beneficial microbe-induced plant stress tolerance.

Ethylene induced plant stress tolerance by Enterobacter sp. SA187 is mediated by 2‐keto‐4‐methylthiobutyric acid production

Science.gov (United States)

Xie, Yakun; Rolli, Eleonora; Guerard, Florence; Colcombet, Jean; Benhamed, Moussa; Depaepe, Thomas

2018-01-01

Several plant species require microbial associations for survival under different biotic and abiotic stresses. In this study, we show that Enterobacter sp. SA187, a desert plant endophytic bacterium, enhances yield of the crop plant alfalfa under field conditions as well as growth of the model plant Arabidopsis thaliana in vitro, revealing a high potential of SA187 as a biological solution for improving crop production. Studying the SA187 interaction with Arabidopsis, we uncovered a number of mechanisms related to the beneficial association of SA187 with plants. SA187 colonizes both the surface and inner tissues of Arabidopsis roots and shoots. SA187 induces salt stress tolerance by production of bacterial 2-keto-4-methylthiobutyric acid (KMBA), known to be converted into ethylene. By transcriptomic, genetic and pharmacological analyses, we show that the ethylene signaling pathway, but not plant ethylene production, is required for KMBA-induced plant salt stress tolerance. These results reveal a novel molecular communication process during the beneficial microbe-induced plant stress tolerance. PMID:29554117

Ergonomics SA

African Journals Online (AJOL)

Journal Homepage Image. Ergonomics SA (esa) provides a medium for publication of material relevant to occupational conditions and needs in Southern Africa at a time of change unparalleled in history. To this end the journal accepts articles in the following categories: research papers, review articles, conceptual theories, ...

Preparation of MgO with High Surface Area, and Modification of Its Pore Characteristics

Energy Technology Data Exchange (ETDEWEB)

Lee, Moon Hee; Park, Dong Gon [Sookmyung Women' s University, Seoul (Korea, Republic of)

2003-10-15

Thermal decomposition of hydrated surface layer of Mg(OH){sub 2} at 500 .deg. C in vacuum turned non-porous MgO into porous one with high surface area of around 270 m{sup 2}/g. Most of its surface area, 74 %, was from micropores, and rest of it was from mesopores in wedge-shaped slits, exhibiting bimodal size distribution centered around 30 and 90 A. Rehydration followed by subsequent dehydration at 300 .deg. C in dynamic vacuum further raised the surface area to 340 m{sup 2}/g. Fraction of microporous surface area was increased to 93%, and the shape of the mesopores was modified into parallel slits with a specific dimension of 32 A. Application of Fe{sub 2}O{sub 3} over MgO via iron complex formation did not alter the pore characteristics of MgO core, except slightly increased pore dimension. Over the course of the modification, Fe{sub 2}O{sub 3} stayed on the surface possibly via spill-over reaction.

Adsorption of water vapour and the specific surface area of arctic zone soils (Spitsbergen)

Science.gov (United States)

Cieśla, Jolanta; Sokołowska, Zofia; Witkowska-Walczak, Barbara; Skic, Kamil

2018-01-01

Water vapour/nitrogen adsorption were investigated and calculated the specific surface areas of arctic-zone soil samples (Turbic Cryosols) originating from different micro-relief forms (mud boils, cell forms and sorted circles) and from different depths. For the characterisation of the isotherms obtained for arctic soils, the Brunauer-Emmet-Teller model was then compared with the two other models (Aranovich-Donohue and Guggenheim-Anderson-de Boer) which were developed from Brunauer-Emmet-Teller. Specific surface area was calculated using the Brunauer-Emmet-Teller model at p p0-1 range of 0.05-0.35 for the water vapour desorption and nitrogen adsorption isotherms. The values of total specific surface area were the highest in Cryosols on mud boils, lower on cell forms, and the lowest on sorted circles. Such tendency was observed for the results obtained by both the water vapour and nitrogen adsorption. The differences in the values of specific surface area at two investigated layers were small. High determination coefficients were obtained for relationships between the specific surface areas and contents of clay and silt fraction in Cryosols. No statistically significant correlation between the total carbon amount and the values of specific surface area in Cryosols has been found.

Relações sociais e autopercepção da saúde: projeto envelhecimento e saúde Social relations and self- rated health: the ageing and health project

Directory of Open Access Journals (Sweden)

Ana Paula Nogueira Nunes

2012-06-01

Full Text Available OBJETIVO: Investigar a associação entre as relações sociais e a autopercepção da saúde em idosos. MÉTODOS: Estudo transversal de amostra representativa de idosos cobertos pelo Programa de Saúde da Família e residentes em uma área de alta vulnerabilidade para a saúde em Belo Horizonte, MG. As informações foram obtidas por meio de entrevista estruturada. Idosos que relataram autopercepção ruim ou muito ruim da saúde foram comparados aos demais e os fatores associados foram determinados por meio de regressão logística múltipla. RESULTADOS: 363 dos 371 idosos elegíveis participaram do estudo. A autopercepção ruim da saúde foi relatada por 17,1% dos idosos e foi positivamente associada com o número de doenças crônicas e o grau de dificuldade para realizar as atividades de vida diária, apresentando um gradiente dose resposta. Idosos com auto-avaliação negativa dos relacionamentos pessoais e que não podiam contar com alguém caso ficassem acamados tiveram mais chance de autoperceber sua saúde como ruim. Trabalhar foi associado negativamente com a autopercepção ruim da saúde. CONCLUSÃO: Os resultados encontrados corroboram a estrutura multidimensional da autopercepção da saúde englobando fatores sociodemográficos, aspectos relacionados à saúde e às relações sociais e reforçam o papel dessas últimas sobre a saúde.OBJECTIVE: To investigate the association between social relationships and self-perceived health in the elderly. METHODS: cross-sectional study of a representative sample of elderly individuals covered by the Family Health Program and residents in an area of high health vulnerability in Belo Horizonte, MG. Information was obtained through structured interviews. Factors associated with poor or very poor self-perceived health were identified by multiple logistic regression analysis. RESULTS: 363 out of 371 eligible elderly participated; 17.1% of elderly self-perceived their health as poor. There was

Organizing Principles of Human Cortical Development--Thickness and Area from 4 to 30 Years: Insights from Comparative Primate Neuroanatomy.

Science.gov (United States)

Amlien, Inge K; Fjell, Anders M; Tamnes, Christian K; Grydeland, Håkon; Krogsrud, Stine K; Chaplin, Tristan A; Rosa, Marcello G P; Walhovd, Kristine B

2016-01-01

The human cerebral cortex undergoes a protracted, regionally heterogeneous development well into young adulthood. Cortical areas that expand the most during human development correspond to those that differ most markedly when the brains of macaque monkeys and humans are compared. However, it remains unclear to what extent this relationship derives from allometric scaling laws that apply to primate brains in general, or represents unique evolutionary adaptations. Furthermore, it is unknown whether the relationship only applies to surface area (SA), or also holds for cortical thickness (CT). In 331 participants aged 4 to 30, we calculated age functions of SA and CT, and examined the correspondence of human cortical development with macaque to human expansion, and with expansion across nonhuman primates. CT followed a linear negative age function from 4 to 30 years, while SA showed positive age functions until 12 years with little further development. Differential cortical expansion across primates was related to regional maturation of SA and CT, with age trajectories differing between high- and low-expanding cortical regions. This relationship adhered to allometric scaling laws rather than representing uniquely macaque-human differences: regional correspondence with human development was as large for expansion across nonhuman primates as between humans and macaque. © The Author 2014. Published by Oxford University Press. All rights reserved. For Permissions, please e-mail: journals.permissions@oup.com.

High surface area V-Mo-N materials synthesized from amine intercalated foams

International Nuclear Information System (INIS)

Krawiec, Piotr; Narayan Panda, Rabi; Kockrick, Emanuel; Geiger, Dorin; Kaskel, Stefan

2008-01-01

Nanocrystalline ternary V-Mo nitrides were prepared via nitridation of amine intercalated oxide foams or bulk ternary oxides. Specific surface areas were in the range between 40 and 198 m 2 g -1 and strongly depended on the preparation method (foam or bulk oxide). Foamed precursors were favorable for vanadium rich materials, while for molybdenum rich samples bulk ternary oxides resulted in higher specific surface areas. The materials were characterized via nitrogen physisorption at 77 K, X-ray diffraction patterns, electron microscopy, and elemental analysis. - Graphical abstract: Nanocrystalline ternary V-Mo nitrides were prepared via nitridation of amine intercalated oxide foams or bulk ternary oxides. Foamed precursors were favorable for vanadium rich materials, while for molybdenum rich samples bulk ternary oxides resulted in higher specific surface areas

SaLEM (v1.0) - the Soil and Landscape Evolution Model (SaLEM) for simulation of regolith depth in periglacial environments

Science.gov (United States)

Bock, Michael; Conrad, Olaf; Günther, Andreas; Gehrt, Ernst; Baritz, Rainer; Böhner, Jürgen

2018-04-01

We propose the implementation of the Soil and Landscape Evolution Model (SaLEM) for the spatiotemporal investigation of soil parent material evolution following a lithologically differentiated approach. Relevant parts of the established Geomorphic/Orogenic Landscape Evolution Model (GOLEM) have been adapted for an operational Geographical Information System (GIS) tool within the open-source software framework System for Automated Geoscientific Analyses (SAGA), thus taking advantage of SAGA's capabilities for geomorphometric analyses. The model is driven by palaeoclimatic data (temperature, precipitation) representative of periglacial areas in northern Germany over the last 50 000 years. The initial conditions have been determined for a test site by a digital terrain model and a geological model. Weathering, erosion and transport functions are calibrated using extrinsic (climatic) and intrinsic (lithologic) parameter data. First results indicate that our differentiated SaLEM approach shows some evidence for the spatiotemporal prediction of important soil parental material properties (particularly its depth). Future research will focus on the validation of the results against field data, and the influence of discrete events (mass movements, floods) on soil parent material formation has to be evaluated.

A longitudinal study: changes in cortical thickness and surface area during pubertal maturation.

Directory of Open Access Journals (Sweden)

Megan M Herting

Full Text Available Sex hormones have been shown to contribute to the organization and function of the brain during puberty and adolescence. Moreover, it has been suggested that distinct hormone changes in girls versus boys may contribute to the emergence of sex differences in internalizing and externalizing behavior during adolescence. In the current longitudinal study, the influence of within-subject changes in puberty (physical and hormonal on cortical thickness and surface area was examined across a 2-year span, while controlling for age. Greater increases in Tanner Stage predicted less superior frontal thinning and decreases in precuneus surface area in both sexes. Significant Tanner Stage and sex interactions were also seen, with less right superior temporal thinning in girls but not boys, as well as greater decreases in the right bank of the superior temporal sulcus surface area in boys compared to girls. In addition, within-subject changes in testosterone over the 2-year follow-up period were found to relate to decreases in middle superior frontal surface area in boys, but increases in surface area in girls. Lastly, larger increases in estradiol in girls predicted greater middle temporal lobe thinning. These results show that within-subject physical and hormonal markers of puberty relate to region and sex-specific changes in cortical development across adolescence.

A longitudinal study: changes in cortical thickness and surface area during pubertal maturation.

Science.gov (United States)

Herting, Megan M; Gautam, Prapti; Spielberg, Jeffrey M; Dahl, Ronald E; Sowell, Elizabeth R

2015-01-01

Sex hormones have been shown to contribute to the organization and function of the brain during puberty and adolescence. Moreover, it has been suggested that distinct hormone changes in girls versus boys may contribute to the emergence of sex differences in internalizing and externalizing behavior during adolescence. In the current longitudinal study, the influence of within-subject changes in puberty (physical and hormonal) on cortical thickness and surface area was examined across a 2-year span, while controlling for age. Greater increases in Tanner Stage predicted less superior frontal thinning and decreases in precuneus surface area in both sexes. Significant Tanner Stage and sex interactions were also seen, with less right superior temporal thinning in girls but not boys, as well as greater decreases in the right bank of the superior temporal sulcus surface area in boys compared to girls. In addition, within-subject changes in testosterone over the 2-year follow-up period were found to relate to decreases in middle superior frontal surface area in boys, but increases in surface area in girls. Lastly, larger increases in estradiol in girls predicted greater middle temporal lobe thinning. These results show that within-subject physical and hormonal markers of puberty relate to region and sex-specific changes in cortical development across adolescence.

Infinitesimal-area 2D radiative analysis using parametric surface representation, through NURBS

Energy Technology Data Exchange (ETDEWEB)

Daun, K J; Hollands, K G.T.

1999-07-01

The use of form factors in the treatment of radiant enclosures requires that the radiosity and surface properties be treated as uniform over finite areas. This restriction can be relaxed by applying an infinitesimal-area analysis, where the radiant exchange is taken to be between infinitesimal areas, rather than finite areas. This paper presents a generic infinitesimal-area formulation that can be applied to two-dimensional enclosure problems. (Previous infinitesimal-area analyses have largely been restricted to specific, one-dimensional problems.) Specifically, the paper shows how the analytical expression for the kernel of the integral equation can be obtained without human intervention, once the enclosure surface has been defined parametrically. This can be accomplished by using a computer algebra package or by using NURBS algorithms, which are the industry standard for the geometrical representations used in CAD-CAM codes. Once the kernel has been obtained by this formalism, the 2D integral equation can be set up and solved numerically. The result is a single general-purpose infinitesimal-area analysis code that can proceed from surface specification to solution. The authors have implemented this 2D code and tested it on 1D problems, whose solutions have been given in the literature, obtaining agreement commensurate with the accuracy of the published solutions.

Weasel works SA-150: Design study of a 100 to 150 passenger transport aircraft

Science.gov (United States)

Alkema, Kevin; Comeaux, Michael; Gilbert, Timothy; Para, Victor; Toepfer, George

1993-01-01

As the year 2000 rapidly approaches, the airlines are faced with an extremely competitive and environmentally restrictive marketplace. In order to survive, commercial air carriers will need to find new ways to lower their direct operating costs, increase load factors and comply with tightening federal and international constraints. The SA-150 has been designed to meet these demands by focusing on the areas of aerodynamic efficiency, an improved level of passenger comfort, and a limited application of advanced technology. The SA-150 has been optimized for a 500 nmi. mission to help the airlines meet the challenges of the short haul, quick turnaround flight. With a maximum capacity of 124 passengers, and full baggage, the SA-150 is also capable of covering a range of 1500 nmi. This additional range capability will provide the airlines with flexibility when scheduling their routes. The aircraft features a 'V' tail, fly-by-wire system and is powered by two turbofans mounted under a twelve aspect ratio wing. The SA-150 will have an initial production run of 800 units and have a purchase price of $37.7 million in 1993 dollars.

Apoio social e saúde entre idosos

Directory of Open Access Journals (Sweden)

Ramos Marília P.

2002-01-01

Full Text Available O presente artigo trata da relação entre a saúde dos idosos e relacionamentos sociais, bem como na interpretação e entendimento desta problemática sob a luz de dois enfoques teóricos: um macro, centrado na Teoria da Integração Social de Emile Durkheim e outro micro, centrado na Teoria das Trocas, de Peter Blau, com ênfase na Teoria da Eqüidade. A integração social (freqüência de contatos pode ter efeitos negativos na saúde, mas isto tem de ser medido pela qualidade dos contatos. Algumas conclusões apresentadas indicam que as relações sociais têm um efeito na saúde, no sentido de que as pessoas, nas sociedades modernas, esperam a reciprocidade, e, quando isto não é possível, principalmente na fase do envelhecimento, as pessoas sentem-se dependentes, e isso pode afetar a saúde de diferentes maneiras. Por outro lado, quando as pessoas têm problemas de saúde, elas experienciam uma falta de relações sociais balanceadas devido à incapacidade para trocar em bases iguais. Sendo assim, conclui-se que a relação entre relações sociais e saúde na população idosa pode ser uma relação recíproca.

Nanotechnological Advances in Catalytic Thin Films for Green Large-Area Surfaces

Directory of Open Access Journals (Sweden)

Suzan Biran Ay

2015-01-01

Full Text Available Large-area catalytic thin films offer great potential for green technology applications in order to save energy, combat pollution, and reduce global warming. These films, either embedded with nanoparticles, shaped with nanostructuring techniques, hybridized with other systems, or functionalized with bionanotechnological methods, can include many different surface properties including photocatalytic, antifouling, abrasion resistant and mechanically resistive, self-cleaning, antibacterial, hydrophobic, and oleophobic features. Thus, surface functionalization with such advanced structuring methods is of significance to increase the performance and wide usage of large-area thin film coatings specifically for environmental remediation. In this review, we focus on methods to increase the efficiency of catalytic reactions in thin film and hence improve the performance in relevant applications while eliminating high cost with the purpose of widespread usage. However, we also include the most recent hybrid architectures, which have potential to make a transformational change in surface applications as soon as high quality and large area production techniques are available. Hence, we present and discuss research studies regarding both organic and inorganic methods that are used to structure thin films that have potential for large-area and eco-friendly coatings.

Saúde ambiental e saúde do trabalhador na atenção primária à saúde, no SUS: oportunidades e desafios Environmental and workers' health, within the framework of primary health care in the Brazilian National Health System (SUS: opportunities and challenges

Directory of Open Access Journals (Sweden)

Elizabeth Costa Dias

2009-12-01

Full Text Available O texto busca contribuir para a discussão dos entrecruzamentos entre os campos da saúde ambiental e da saúde do trabalhador, referenciada no cenário brasileiro das relações produção/trabalho, ambiente e saúde e nas mudanças na organização do SUS, com destaque para o papel da atenção primária à saúde (APS, e se destina a contribuir para as discussões no processo de preparação da 1ª Conferência Nacional de Saúde Ambiental (1ª CNSA, prevista para ser realizada em dezembro de 2009. São descritos, de modo sintético, aspectos históricos e conceituais desses campos, algumas das características compartilhadas e as ações esperadas do sistema de saúde, com destaque para o papel da APS e a importância do diálogo com o movimento social. Finalizando, são identificados pontos para uma agenda de trabalho comum.This paper has the purpose of contributing to the discussion of the crossing areas between Environmental Health and Workers´ Health, in the Brazilian context of Labor, Production, Environment and Health. This paper emerges in the context of the current organizational changes of the Brazilian National Health System (SUS, with a major focus on Primary Health Care, having in mind, also, the preparation of the 1st National Environmental Health Conference (1ª CNSA to be held in December of 2009. So, historical and conceptual aspects of those fields are described in a summarized manner, as well as some shared features and expected actions of the Health System, with emphasis to the role of Primary Health Care and to the importance of the dialogue with the social movement. Finally, some topics for a common agenda were identified by the authors.

Influence of Ecological Factors on Estimation of Impervious Surface Area Using Landsat 8 Imagery

Directory of Open Access Journals (Sweden)

Yuqiu Jia

2017-07-01

Full Text Available Estimation of impervious surface area is important to the study of urban environments and social development, but surface characteristics, as well as the temporal, spectral, and spatial resolutions of remote sensing images, influence the estimation accuracy. To investigate the effects of regional environmental characteristics on the estimation of impervious surface area, we divided China into seven sub-regions based on climate, soil type, feature complexity, and vegetation phenology: arid and semi-arid areas, Huang-Huai-Hai winter wheat production areas, typical temperate regions, the Pearl River Delta, the middle and lower reaches of the Yangtze River, typical tropical and subtropical regions, and the Qinghai Tibet Plateau. Impervious surface area was estimated from Landsat 8 images of five typical cities, including Yinchuan, Shijiazhuang, Shenyang, Ningbo, and Kunming. Using the linear spectral unmixing method, impervious and permeable surface areas were determined at the pixel-scale based on end-member proportions. We calculated the producer’s accuracy, user’s accuracy, and overall accuracy to assess the estimation accuracy, and compared the accuracies among images acquired from different seasons and locations. In tropical and subtropical regions, vegetation canopies can confound the identification of impervious surfaces and, thus, images acquired in winter, early spring, and autumn are most suitable; estimations in the Pearl River Delta, the middle and lower reaches of the Yangtze River are influenced by soil, vegetation phenology, vegetation canopy, and water, and images acquired in spring, summer, and autumn provide the best results; in typical temperate areas, images acquired from spring to autumn are most effective for estimations; in winter wheat-growing areas, images acquired throughout the year are suitable; and in arid and semi-arid areas, summer and early autumn, during which vegetation is abundant, are the optimal seasons for

Comunicação entre usuários e trabalhadores de saúde em colegiados de Saúde da Família

Directory of Open Access Journals (Sweden)

Marcelen Palu Longhi

2013-02-01

Full Text Available Atualmente, têm sido observados problemas relativos à comunicação nos fóruns de participação social da saúde. O presente estudo tem o objetivo de analisar a comunicação entre usuários e trabalhadores de saúde, em colegiados da Saúde da Família. O referencial teórico utilizado foi a Teoria da Ação Comunicativa de Habermas. Realizou-se uma pesquisa qualitativa. Os dados coletados revelaram duas dimensões que se entrelaçavam: distanciamentos e aproximações entre usuários e trabalhadores de saúde. Quanto aos distanciamentos, destacaram-se a presença de relações assimétricas, de coerção e de manipulação por parte dos trabalhadores de saúde, processos que prejudicam a participação dos usuários. Por outro lado, estiveram presentes momentos de interação e lutas por direitos, abordados nas aproximações entre usuários e trabalhadores de saúde. Por fim, consideramos que a comunicação nos colegiados da Saúde da Família apresenta potencialidades e limites, sendo que estes devem ser problematizados, especialmente, por meio da educação permanente em saúde.

Vigilância ambiental em saúde e sua implantação no Sistema Único de Saúde

Directory of Open Access Journals (Sweden)

Barcellos Christovam

2006-01-01

Full Text Available A incorporação da vigilância ambiental no campo das políticas públicas de saúde é uma demanda relativamente recente no Brasil. Um dos principais desafios da vigilância ambiental em saúde é a definição do seu objeto e a especificidade de suas ações. O conceito ampliado de exposição, tratado não como um atributo da pessoa, mas do conjunto de relações complexas entre a sociedade e o ambiente, é central para a definição de indicadores e para a orientação da prática de vigilância ambiental. Entre as dificuldades encontradas para sua efetivação no Sistema Único de Saúde estão a necessidade de reestruturação das ações de vigilância em saúde e a formação de equipes multidisciplinares, com capacidade de diálogo com outros setores, além da construção de sistemas de informação capazes de auxiliar a análise de situações de saúde e a tomada de decisões. Nesse sentido, foi realizada uma revisão do objeto e conceitos da vigilância ambiental em saúde, bem como identificados os desafios para a sua implantação no Sistema Único de Saúde.

Vigilância ambiental em saúde e sua implantação no Sistema Único de Saúde

Directory of Open Access Journals (Sweden)

Christovam Barcellos

2006-02-01

Full Text Available A incorporação da vigilância ambiental no campo das políticas públicas de saúde é uma demanda relativamente recente no Brasil. Um dos principais desafios da vigilância ambiental em saúde é a definição do seu objeto e a especificidade de suas ações. O conceito ampliado de exposição, tratado não como um atributo da pessoa, mas do conjunto de relações complexas entre a sociedade e o ambiente, é central para a definição de indicadores e para a orientação da prática de vigilância ambiental. Entre as dificuldades encontradas para sua efetivação no Sistema Único de Saúde estão a necessidade de reestruturação das ações de vigilância em saúde e a formação de equipes multidisciplinares, com capacidade de diálogo com outros setores, além da construção de sistemas de informação capazes de auxiliar a análise de situações de saúde e a tomada de decisões. Nesse sentido, foi realizada uma revisão do objeto e conceitos da vigilância ambiental em saúde, bem como identificados os desafios para a sua implantação no Sistema Único de Saúde.

Composition and Value of waste in landfills in SA

CSIR Research Space (South Africa)

Oelofse, Suzanna HH

2015-09-01

Full Text Available in landfills in SA German Chamber of Business From Mining to Urban Mining 16 September 2015 IFAT Environmental Technology Forum Africa 2015 by Prof Suzan Oelofse Research Group Leader: Waste for Development Competency Area: Solutions for a Green... in collection infrastructure is required • Creation of entrepreneurial opportunities • Design for recycling • Creation of markets for recycled materials – Replacing virgin materials with recyclate – Develop new innovative high quality recycled products...

Health SA Gesondheid

African Journals Online (AJOL)

Journal Home > Vol 23, No 1 (2018) ... Health SA Gesondheid - Journal of Interdisciplinary Health Sciences is an open access, peer-reviewed ... improvement of health safety and service delivery; management and measurement of health ...

Hand surface area estimation formula using 3D anthropometry.

Science.gov (United States)

Hsu, Yao-Wen; Yu, Chi-Yuang

2010-11-01

Hand surface area is an important reference in occupational hygiene and many other applications. This study derives a formula for the palm surface area (PSA) and hand surface area (HSA) based on three-dimensional (3D) scan data. Two-hundred and seventy subjects, 135 males and 135 females, were recruited for this study. The hand was measured using a high-resolution 3D hand scanner. Precision and accuracy of the scanner is within 0.67%. Both the PSA and HSA were computed using the triangular mesh summation method. A comparison between this study and previous textbook values (such as in the U.K. teaching text and Lund and Browder chart discussed in the article) was performed first to show that previous textbooks overestimated the PSA by 12.0% and HSA by 8.7% (for the male, PSA 8.5% and HSA 4.7%, and for the female, PSA 16.2% and HSA 13.4%). Six 1D measurements were then extracted semiautomatically for use as candidate estimators for the PSA and HSA estimation formula. Stepwise regressions on these six 1D measurements and variable dependency test were performed. Results show that a pair of measurements (hand length and hand breadth) were able to account for 96% of the HSA variance and up to 98% of the PSA variance. A test of the gender-specific formula indicated that gender is not a significant factor in either the PSA or HSA estimation.

Response Surface Methodology's Steepest Ascent and Step Size Revisited

NARCIS (Netherlands)

Kleijnen, J.P.C.; den Hertog, D.; Angun, M.E.

2002-01-01

Response Surface Methodology (RSM) searches for the input combination maximizing the output of a real system or its simulation.RSM is a heuristic that locally fits first-order polynomials, and estimates the corresponding steepest ascent (SA) paths.However, SA is scale-dependent; and its step size is

Quasars in the field of SA94. III. A colour survey

International Nuclear Information System (INIS)

Cristiani, S.; Barbieri, C.; La Franca, F.; Nota, A.

1989-01-01

A new sample of quasars has been selected in the central 10 square degrees of SA 94. The colour-colour U - B, B - V diagram has been used to identify low-redshift quasar candidates down to B = 19.8.99 extragalactic emission-line objects have been spectroscopically confirmed. The quasar surface density for QSOs with z ≤ 2.25 and other properties of this sample are derived and compared with other surveys

Ambient pressure dried tetrapropoxysilane-based silica aerogels with high specific surface area

Science.gov (United States)

Parale, Vinayak G.; Han, Wooje; Jung, Hae-Noo-Ree; Lee, Kyu-Yeon; Park, Hyung-Ho

2018-01-01

In the present paper, we report the synthesis of tetrapropoxysilane (TPOS)-based silica aerogels with high surface area and large pore volume. The silica aerogels were prepared by a two-step sol-gel process followed by surface modification via a simple ambient pressure drying approach. In order to minimize drying shrinkage and obtain hydrophobic aerogels, the surface of the alcogels was modified using trichloromethylsilane as a silylating agent. The effect of the sol-gel compositional parameters on the polymerization of aerogels prepared by TPOS, one of the precursors belonging to the Si(OR)4 family, was reported for the first time. The oxalic acid and NH4OH concentrations were adjusted to achieve good-quality aerogels with high surface area, low density, and high transparency. Controlling the hydrolysis and condensation reactions of the TPOS precursor turned out to be the most important factor to determine the pore characteristics of the aerogel. Highly transparent aerogels with high specific surface area (938 m2/g) and low density (0.047 g/cm3) could be obtained using an optimized TPOS/MeOH molar ratio with appropriate concentrations of oxalic acid and NH4OH.

Growth of contact area between rough surfaces under normal stress

Science.gov (United States)

Stesky, R. M.; Hannan, S. S.

1987-05-01

The contact area between deforming rough surfaces in marble, alabaster, and quartz was measured from thin sections of surfaces bonded under load with low viscosity resin epoxy. The marble and alabaster samples had contact areas that increased with stress at an accelerating rate. This result suggests that the strength of the asperity contacts decreased progressively during the deformation, following some form of strain weakening relationship. This conclusion is supported by petrographic observation of the thin sections that indicate that much of the deformation was cataclastic, with minor twinning of calcite and kinking of gypsum. In the case of the quartz, the observed contact area was small and increased approximately linearly with normal stress. Only the irreversible cataclastic deformation was observed; however strain-induced birefringence and cracking of the epoxy, not observed with the other rocks, suggests that significant elastic deformation occurred, but recovered during unloading.

Diretrizes Curriculares na saúde e as mudanças nos modelos de saúde e de educação

Directory of Open Access Journals (Sweden)

Carlos Otávio Fiúza Moreira

2015-12-01

Full Text Available Artigo produzido a partir de pesquisa bibliográfica e de questões formuladas para uma conferência no módulo “Educação na Saúde II” do Mestrado Profissional da Rede Nordeste de Formação em Saúde da Família. O texto discute questões dos campos da saúde e da educação relacionadas à emergência de novos modelos de saúde e de formação; analisa também as Diretrizes Curriculares Nacionais (DCN de três cursos da área da saúde (Medicina, Enfermagem e Odontologia como expressão desses novos modelos para saúde e para a educação. Uma questão transversal ao artigo são as relações entre os campos da saúde e da educação. Para isto, lança‑se mão do conceito de campo, desenvolvido pelo sociólogo Pierre Bourdieu. Considera‑se, ainda, o desafio de transformar as DCN em currículos e programas, ferramentas ou dispositivos necessários para fazer a passagem do que está prescrito para os cenários de ensino e aprendizagem.

Study of measurement methods of ultrafine aerosols surface-area for characterizing occupational exposure

International Nuclear Information System (INIS)

Bau, S.

2008-12-01

This work aims at improving knowledge on ultrafine aerosols surface-area measurement. Indeed, the development of nano-technologies may lead to occupational exposure to airborne nano-structured particles, which involves a new prevention issue. There is currently no consensus concerning what parameter (mass, surface-area, number) should be measured. However, surface-area could be a relevant metric, since it leads to a satisfying correlation with biological effects when nano-structured particles are inhaled. Hence, an original theoretical work was performed to position the parameter of surface-area in relation to other aerosol characteristics. To investigate measurement techniques of nano-structured aerosols surface-area, the experimental facility CAIMAN (Characterization of Instruments for the Measurement of Aerosols of Nano-particles) was designed and built. Within CAIMAN, it is possible to produce nano-structured aerosols with varying and controlled properties (size, concentration, chemical nature, morphology, state-of-charge), stable and reproducible in time. The generated aerosols were used to experimentally characterize the response of the instruments in study (NSAM and AeroTrak 9000 TSI, LQ1-DC Matter Engineering). The response functions measured with monodisperse aerosols show a good agreement with the corresponding theoretical curves in a large size range, from 15 to 520 nm. Furthermore, hypotheses have been formulated to explain the reasonable biases observed when measuring poly-disperse aerosols. (author)

Models of bedrock surface and overburden thickness over Olkiluoto island and nearby sea area

Energy Technology Data Exchange (ETDEWEB)

Moenkkoenen, H. [WSP Finland Oy, Helsinki (Finland)

2012-04-15

In this report, a model of bedrock surface and a model of overburden thickness over the Olkiluoto Island and the nearby sea area are presented. Also in purpose to produce material for biosphere and radionuclide transport modelling, stratigraphy models of different sediment layers were created at two priority areas north and south of the Olkiluoto Island. The work concentrated on the collection and description of available data of bedrock surface and overburden thickness. Because the information on the bedrock surface and overburden is collected from different sources and is based on a number of types of data the quality and applicability of data sets varies. Consequently also the reliability in different parts of the models varies. Input data for the bedrock surface and overburden thickness models include 2928 single points and additional outcrops observations (611 polygons) in the modelled area. In addition, the input data include 173 seismic refraction lines (6534 points) and acousticseismic sounding lines (26655 points from which 13721 points are located in model area) in the Olkiluoto offshore area. The average elevation of bedrock surface in area is 2.1 metres above the sea level. The average thickness of overburden is 2.5 metres varying typically between 2 - 4 metres. Thickest overburden covers (approximately 16 metres) of terrestrial area are located at the western end of the Olkiluoto Island and in sea basin south of the island. (orig.)

Models of bedrock surface and overburden thickness over Olkiluoto island and nearby sea area

International Nuclear Information System (INIS)

Moenkkoenen, H.

2012-04-01

In this report, a model of bedrock surface and a model of overburden thickness over the Olkiluoto Island and the nearby sea area are presented. Also in purpose to produce material for biosphere and radionuclide transport modelling, stratigraphy models of different sediment layers were created at two priority areas north and south of the Olkiluoto Island. The work concentrated on the collection and description of available data of bedrock surface and overburden thickness. Because the information on the bedrock surface and overburden is collected from different sources and is based on a number of types of data the quality and applicability of data sets varies. Consequently also the reliability in different parts of the models varies. Input data for the bedrock surface and overburden thickness models include 2928 single points and additional outcrops observations (611 polygons) in the modelled area. In addition, the input data include 173 seismic refraction lines (6534 points) and acousticseismic sounding lines (26655 points from which 13721 points are located in model area) in the Olkiluoto offshore area. The average elevation of bedrock surface in area is 2.1 metres above the sea level. The average thickness of overburden is 2.5 metres varying typically between 2 - 4 metres. Thickest overburden covers (approximately 16 metres) of terrestrial area are located at the western end of the Olkiluoto Island and in sea basin south of the island. (orig.)

Development of magnetic sensors for JT-60SA

Energy Technology Data Exchange (ETDEWEB)

Takechi, M., E-mail: takechi.manabu@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Matsunaga, G.; Sakurai, S.; Sasajima, T.; Yagyu, J.; Hoshi, R.; Kawamata, Y.; Kurihara, K. [Japan Atomic Energy Agency, Naka, Ibaraki 311-0193 (Japan); Nishikawa, T.; Ryo, T.; Kagamihara, S. [Okazaki Manufacturing Company, Kobe, Hyogo 651-0087 (Japan); Nakamura, K. [RIAM, Kyushu Univ., Kasuga, Fukuoka 816-8580,Japan (Japan)

2015-10-15

JT-60SA has been designed and is being constructed to demonstrate and develop steady-state high-beta operation. Resistive wall mode (RWM) control, error field correction, and edge-localized mode (ELM) control will be performed using in-vessel coils. For these controls, we have developed a biaxial magnetic sensor to determine 3D magnetic configuration of the plasma. Moreover, for obtaining basic information about JT-60SA plasma, magnetic sensors, in particular, one-turn loops, Rogowski coils, diamagnetic loops, and saddle coils have been developed. Because the length of the vacuum vessel in the poloidal direction of JT-60SA is 16 m and almost twice as long as that of JT-60U, the length of the Rogowski coil and the diamagnetic loop of JT-60SA are also twice as long as those on JT-60U. We have devised new types of sensors and a connector for the mineral-insulated cable because construction and installation of these sensors are much more difficult in JT-60SA. We will report the design and specification of the magnetic sensors for JT-60SA from the physics and engineering aspects.

MimoSA: a system for minimotif annotation

Directory of Open Access Journals (Sweden)

Kundeti Vamsi

2010-06-01

Full Text Available Abstract Background Minimotifs are short peptide sequences within one protein, which are recognized by other proteins or molecules. While there are now several minimotif databases, they are incomplete. There are reports of many minimotifs in the primary literature, which have yet to be annotated, while entirely novel minimotifs continue to be published on a weekly basis. Our recently proposed function and sequence syntax for minimotifs enables us to build a general tool that will facilitate structured annotation and management of minimotif data from the biomedical literature. Results We have built the MimoSA application for minimotif annotation. The application supports management of the Minimotif Miner database, literature tracking, and annotation of new minimotifs. MimoSA enables the visualization, organization, selection and editing functions of minimotifs and their attributes in the MnM database. For the literature components, Mimosa provides paper status tracking and scoring of papers for annotation through a freely available machine learning approach, which is based on word correlation. The paper scoring algorithm is also available as a separate program, TextMine. Form-driven annotation of minimotif attributes enables entry of new minimotifs into the MnM database. Several supporting features increase the efficiency of annotation. The layered architecture of MimoSA allows for extensibility by separating the functions of paper scoring, minimotif visualization, and database management. MimoSA is readily adaptable to other annotation efforts that manually curate literature into a MySQL database. Conclusions MimoSA is an extensible application that facilitates minimotif annotation and integrates with the Minimotif Miner database. We have built MimoSA as an application that integrates dynamic abstract scoring with a high performance relational model of minimotif syntax. MimoSA's TextMine, an efficient paper-scoring algorithm, can be used to

Controle social do Sistema Único de Saúde: o que pensam os conselheiros municipais de saúde

Directory of Open Access Journals (Sweden)

Vera Dib Zambon

2013-12-01

Full Text Available Desafios estão presentes para a consolidação da participação da comunidade e este estudo objetiva analisar o controle social na perspectiva dos conselheiros municipais de saúde. Trata-se de estudo de abordagem qualitativa utilizando entrevistas semiestruturadas. Identificou-se que alguns conselheiros não reconhecem a participação social como diretriz do Sistema Único de Saúde. Apesar do reconhecimento dos conselhos como espaços deliberativos, identificam-se dificuldades como a centralização das decisões na gestão, a valorização do saber técnico e a não realização de conferências de saúde. Há limitações no efetivo exercício do papel de conselheiro, dificuldade de interlocução com as bases de representação e de acesso a informações. Aponta-se a necessidade de articulação dos conselheiros e capacitações. Conclui-se pela necessidade de valorização dos espaços colegiados instituídos no Pacto pela Saúde, para fortalecimento do controle social, com destaque à educação permanente em saúde.

An improved hybrid topology optimization approach coupling simulated annealing and SIMP (SA-SIMP)

International Nuclear Information System (INIS)

Garcia-Lopez, N P; Sanchez-Silva, M; Medaglia, A L; Chateauneuf, A

2010-01-01

The Solid Isotropic Material with Penalization (SIMP) methodology has been used extensively due to its versatility and ease of implementation. However, one of its main drawbacks is that resulting topologies exhibit areas of intermediate densities which lack any physical meaning. This paper presents a hybrid methodology which couples simulated annealing and SIMP (SA-SIMP) in order to achieve solutions which are stiffer and predominantly black and white. Under a look-ahead strategy, the algorithm gradually fixes or removes those elements whose density resulting from SIMP is intermediate. Different strategies for selecting and fixing the fractional elements are examined using benchmark examples, which show that topologies resulting from SA-SIMP are more rigid than SIMP and predominantly black and white.

Em busca de uma Teologia Pública da Saúde

Directory of Open Access Journals (Sweden)

Alex Villas Boas

2016-03-01

Full Text Available A proposta de uma teologia pública da saúde visa o diálogo entre antropologia teológica e antropologias médicas e da saúde de modo a ampliar a percepção da saúde, não somente como fato, mas como valor. Mesmo um Estado Laico, suas tradições religiosas possuem hermenêuticas de saúde, ao interpretar a doença e a morte com razões religiosas distintas, ora conflitantes, ora cooperativas com as ciências da saúde. Ampliar essas hermenêuticas religiosas compondo a sabedoria de vida presente nas expressões religiosas e o conhecimento científico da área de saúde visa uma cooperação para interesses de bem comum da sociedade civil, como é a questão da saúde. Para essa reflexão, a escola de Cós combina a sabedoria mítica asclepíade e a ciência jônia. Os mitos de saúde nomeados no juramento hipocrático pertencem à tradição da teologia poética grega e indica uma espécie de credo no qual a medicina hipocrática professa, no qual o médico além de profissional também possui fé na vida e exerce o ofício de sacerdote da esperança. Interessa ainda o modo como o a teologia da saúde grega foi recebida pela teologia cristã, e como ambas desconstruíram suas teodiceias. Nessa recepção há um caminho para pensar uma teologia pública da saúde. 

Planar spatial correlations, anisotropy, and specific surface area of stationary random porous media

International Nuclear Information System (INIS)

Berryman, J.G.

1998-01-01

An earlier result of the author showed that an anisotropic spatial correlation function of a random porous medium could be used to compute the specific surface area when it is stationary as well as anisotropic by first performing a three-dimensional radial average and then taking the first derivative with respect to lag at the origin. This result generalized the earlier result for isotropic porous media of Debye et al. [J. Appl. Phys. 28, 679 (1957)]. The present article provides more detailed information about the use of spatial correlation functions for anisotropic porous media and in particular shows that, for stationary anisotropic media, the specific surface area can be related to the derivative of the two-dimensional radial average of the correlation function measured from cross sections taken through the anisotropic medium. The main concept is first illustrated using a simple pedagogical example for an anisotropic distribution of spherical voids. Then, a general derivation of formulas relating the derivative of the planar correlation functions to surface integrals is presented. When the surface normal is uniformly distributed (as is the case for any distribution of spherical voids), our formulas can be used to relate a specific surface area to easily measurable quantities from any single cross section. When the surface normal is not distributed uniformly (as would be the case for an oriented distribution of ellipsoidal voids), our results show how to obtain valid estimates of specific surface area by averaging measurements on three orthogonal cross sections. One important general observation for porous media is that the surface area from nearly flat cracks may be underestimated from measurements on orthogonal cross sections if any of the cross sections happen to lie in the plane of the cracks. This result is illustrated by taking the very small aspect ratio (penny-shaped crack) limit of an oblate spheroid, but holds for other types of flat surfaces as well

Electromagnetic surface waves for large-area RF plasma productions between large-area planar electrodes

International Nuclear Information System (INIS)

Nonaka, S.

1992-01-01

Recently, large-area plasma production has been tested by means of a 13.56 MHz radio-frequency (RF) discharge between a pair of large-area planar electrodes, approximately 0.5 m x 1.4 m, as one of the semiconductor technologies for fabrication of large-area amorphous silicon solar cells in the ''Sunshine Project'' of the Agency of Industrial Science and Technology in Japan. We also confirmed long plasma production between a pair of long electrodes. In this paper, normal electromagnetic (EM) waves propagating in a region between a planar waveguide with one plasma and two dielectric layers are analyzed in order to study the feasibility of large-area plasma productions by EM wave-discharges between a pair of large-area RF electrodes larger than the half-wavelength of RF wave. In conclusion, plasmas higher than an electron plasma frequency will be produced by an odd TMoo surface mode. (author) 4 refs., 3 figs

Measuring the specific surface area of natural and manmade glasses: effects of formation process, morphology, and particle size

International Nuclear Information System (INIS)

Papelis, Charalambos; Um, Wooyong; Russel, Charles E.; Chapman, Jenny B.

2003-01-01

The specific surface area of natural and manmade solid materials is a key parameter controlling important interfacial processes in natural environments and engineered systems, including dissolution reactions and sorption processes at solid-fluid interfaces. To improve our ability to quantify the release of trace elements trapped in natural glasses, the release of hazardous compounds trapped in manmade glasses, or the release of radionuclides from nuclear melt glass, we measured the specific surface area of natural and manmade glasses as a function of particle size, morphology, and composition. Volcanic ash, volcanic tuff, tektites, obsidian glass, and in situ vitrified rock were analyzed. Specific surface area estimates were obtained using krypton as gas adsorbent and the BET model. The range of surface areas measured exceeded three orders of magnitude. A tektite sample had the highest surface area (1.65 m2/g), while one of the samples of in situ vitrified rock had the lowest surf ace area (0.0016 m2/g). The specific surface area of the samples was a function of particle size, decreasing with increasing particle size. Different types of materials, however, showed variable dependence on particle size, and could be assigned to one of three distinct groups: (1) samples with low surface area dependence on particle size and surface areas approximately two orders of magnitude higher than the surface area of smooth spheres of equivalent size. The specific surface area of these materials was attributed mostly to internal porosity and surface roughness. (2) samples that showed a trend of decreasing surface area dependence on particle size as the particle size increased. The minimum specific surface area of these materials was between 0.1 and 0.01 m2/g and was also attributed to internal porosity and surface roughness. (3) samples whose surface area showed a monotonic decrease with increasing particle size, never reaching an ultimate surface area limit within the particle

Saúde em retrospectiva e prospectivas

Directory of Open Access Journals (Sweden)

Paula Borges Jacques

2017-12-01

Full Text Available Nesse ano que ora está findando, a Saúde mundial enfrentou inúmeros desafios. Houve desastres sísmicos, furacões, vulcões em erupção, ataques terroristas, guerras e, como consequência, refugiados em situação de risco em vários países(1. (Reemergiram doenças que poderiam estar controladas(2,3, como tuberculose, sífilis, AIDS, hipertensão, diabetes, hepatites, ebola, cólera, desnutrição grave, dengue, zica, entre outras. Além disso, surgiram síndromes e doenças que desafiam diagnósticos(3 enquanto diversos hospitais públicos agonizavam em diversos pontos do Brasil(4. Por outro lado, verificaram-se relatos de êxitos sucessivos no controle, tratamentos, desenvolvimento de vacinas, cirurgias e aparatos para erradicação de doenças, como a poliomielite nas Américas, que alegram e motivam a Saúde em todo o planeta(5. Nunca houve, como atualmente, tanta veiculação de ajuda humanitária e de solidariedade em notícias televisivas e nas redes sociais. Nobres trabalhadores da Saúde empenhados em, mais do que salvar vidas, resgatar refugiados, trazer esperança e alento a quem sofreu grandes perdas materiais e familiares(6. Se as redes sociais e a globalização expõem o fragilizado, também são capazes de encabeçar campanhas e salvarem, seja um bebê que precisa de um medicamento (Spiraza® não disponível no Brasil e que custa um milhão de reais para seu tratamento contra a Atrofia Muscular Espinhal (AME(7, sejam milhares de refugiados que deixam seus países em botes praticamente suicidas resgatados pelo Mar Mediterrâneo(8. A Revista Brasileira em Promoção da Saúde (RBPS acredita no desenvolvimento da Promoção da Saúde pelo mundo, e se emociona com cada pequena ou grande boa notícia de auxílio ou ajuda a quem está precisando. Nesse ano, estimou-se mais de 500 milhões de pessoas vivendo em área de risco para zica, dengue e chicungunha em dados de março para as Américas(9. Em estados do Nordeste do Brasil

Indutores de mudança na formação dos profissionais de saúde: pró-saúde e PET-SAÚDE

Directory of Open Access Journals (Sweden)

Isabel Cristina Luck Coelho de Holanda

2012-12-01

Full Text Available Na última década, a formação de profissionais de saúde tem sido reformulada no intuito de atender às necessidades de saúde das pessoas e não somente suas demandas. Políticas públicas de educação e saúde promovidas em parceria com o Ministério da Educação (MEC e o Ministério da Saúde (MS sinalizaram uma reforma curricular imprescindível nos cursos de graduação da área de saúde(1,2 .A formalização dessa mudança teve seu marco com a instituição das Diretrizes Curriculares Nacionais (DCN para os cursos de graduação no campo da saúde. Todos os instrumentos vigentes orientam a construção do perfil dos egressos por meio de um modelo acadêmico e profissional em que atitudes, habilidades e conteúdos almejem a formação generalista, humanista, crítica e reflexiva, com competência para a atuação em todos os níveis de atenção à saúde, embasando suas condutas nos rigores científico e ético(3-7.Não por acaso, todos os documentos ressaltam os mesmos campos de competência a serem desenvolvidos durante a formação dos diferentes profissionais da área: atenção à saúde, tomada de decisões, comunicação, liderança, educação permanente, administração e gerenciamento(3-7, pois a saúde, como um complexo campo de atuação, não consegue imprimir ações resolutivas através de uma única disciplina ou área do saber.A proposta preconizada pelo MEC e MS de produzir transformação nos processos de formação, trabalho e ampliação da cobertura dos serviços tem sido concretizada mediante programas indutores, como o Programa Nacional de Reorientação da Formação Profissional em Saúde (Pró-Saúde e o Programa de Educação pelo Trabalho para a Saúde (PET–Saúde(1,2.O Pró-Saúde, implementado no país desde 2005 através da divulgação de editais, pretende sintonizar a formação em saúde com as necessidades sociais, considerando as dimensões históricas, culturais e econômicas da população(8

Estimation of surface area concentration of workplace incidental nanoparticles based on number and mass concentrations

Science.gov (United States)

Park, J. Y.; Ramachandran, G.; Raynor, P. C.; Kim, S. W.

2011-10-01

Surface area was estimated by three different methods using number and/or mass concentrations obtained from either two or three instruments that are commonly used in the field. The estimated surface area concentrations were compared with reference surface area concentrations (SAREF) calculated from the particle size distributions obtained from a scanning mobility particle sizer and an optical particle counter (OPC). The first estimation method (SAPSD) used particle size distribution measured by a condensation particle counter (CPC) and an OPC. The second method (SAINV1) used an inversion routine based on PM1.0, PM2.5, and number concentrations to reconstruct assumed lognormal size distributions by minimizing the difference between measurements and calculated values. The third method (SAINV2) utilized a simpler inversion method that used PM1.0 and number concentrations to construct a lognormal size distribution with an assumed value of geometric standard deviation. All estimated surface area concentrations were calculated from the reconstructed size distributions. These methods were evaluated using particle measurements obtained in a restaurant, an aluminum die-casting factory, and a diesel engine laboratory. SAPSD was 0.7-1.8 times higher and SAINV1 and SAINV2 were 2.2-8 times higher than SAREF in the restaurant and diesel engine laboratory. In the die casting facility, all estimated surface area concentrations were lower than SAREF. However, the estimated surface area concentration using all three methods had qualitatively similar exposure trends and rankings to those using SAREF within a workplace. This study suggests that surface area concentration estimation based on particle size distribution (SAPSD) is a more accurate and convenient method to estimate surface area concentrations than estimation methods using inversion routines and may be feasible to use for classifying exposure groups and identifying exposure trends.

Draft Genome Sequence of Ochrobactrum intermedium Strain SA148, a Plant Growth-Promoting Desert Rhizobacterium

KAUST Repository

Lafi, Feras Fawzi; Alam, Intikhab; Geurts, Rene; Bisseling, Ton; Bajic, Vladimir B.; Hirt, Heribert; Saad, Maged

2017-01-01

Ochrobactrum intermedium strain SA148 is a plant growth-promoting bacterium isolated from sandy soil in the Jizan area of Saudi Arabia. Here, we report the 4.9-Mb draft genome sequence of this strain, highlighting different pathways characteristic

SaOS-2 cell response to macro-porous boron-incorporated TiO{sub 2} coating prepared by micro-arc oxidation on titanium

Energy Technology Data Exchange (ETDEWEB)

Huang, Qianli [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Elkhooly, Tarek A. [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Department of Ceramics, Inorganic Chemical Industries Division, National Research Centre, Dokki, 12622 Cairo (Egypt); Liu, Xujie [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Graduate School at Shenzhen, Tsinghua University, Shenzhen 518055 (China); Zhang, Ranran; Yang, Xing; Shen, Zhijian [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Feng, Qingling, E-mail: biomater@mail.tsinghua.edu.cn [State Key Laboratory of New Ceramics and Fine Processing, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Key Laboratory of Advanced Materials of Ministry of Education of China, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)

2016-10-01

The aims of the present study were to develop boron-incorporated TiO{sub 2} coating (B-TiO{sub 2} coating) through micro-arc oxidation (MAO) and subsequently evaluate the effect of boron incorporation on the in vitro biological performance of the coatings. The physicochemical properties of B-TiO{sub 2} coating and its response to osteoblast like cells (SaOS-2) were investigated compared to the control group without boron (TiO{sub 2} coating). The morphological and X-ray diffraction results showed that both coatings exhibited similar surface topography and phase composition, respectively. However, the incorporation of B led to an enhancement in the surface hydrophilicity of B-TiO{sub 2} coating. The spreading of SaOS-2 cells on B-TiO{sub 2} coating was faster than that on TiO{sub 2} coating. The proliferation rate of SaOS-2 cells cultured on B-TiO{sub 2} decreased after 5 days of culture compared to that on TiO{sub 2} coating. SaOS-2 cells cultured on B-TiO{sub 2} coating exhibited an enhanced alkaline phosphatase (ALP) activity, Collagen I synthesis and in vitro mineralization compared to those on TiO{sub 2} coating. The present findings suggest that B-TiO{sub 2} coating is a promising candidate surface for orthopedic implants. - Highlights: • SaOS-2 cell response to pure TiO{sub 2} and B-TiO{sub 2} coatings was investigated. • Initial cell spreading on B-TiO{sub 2} coating was accelerated compared to that on TiO{sub 2} coating. • Cell proliferation on B-TiO{sub 2} coating was inhibited compared to that on TiO{sub 2} coating. • Cell differentiation on B-TiO{sub 2} coating was enhanced compared to that on TiO{sub 2} coating.

Controlled surface functionalization of silica-coated magnetic nanoparticles with terminal amino and carboxyl groups

International Nuclear Information System (INIS)

Kralj, Slavko; Drofenik, Miha; Makovec, Darko

2011-01-01

General and versatile methods for the functionalization of superparamagnetic, silica-coated, maghemite nanoparticles by surface amino and/or carboxyl groups have been established. The nanoparticles were synthesized using co-precipitation from aqueous solutions and coated with a thin layer of silica using the hydrolysis and condensation of tetraethoxysilane (TEOS). For the amino functionalization, 3-(2-aminoethylamino)propylmethyldimethoxysilane (APMS) was grafted onto the nanoparticle surfaces in their aqueous suspensions. The grafting process was followed by measurements of the ζ-potential and a determination of the concentration of the surface amino groups with conductometric titrations. The surface concentration of the amino groups could be varied by increasing the amount of APMS in the grafting process up to approximately 2.3 –NH 2 groups per nm 2 . The carboxyl functionalization was obtained in two ways: (i) by a ring-opening linker elongation reaction of the surface amines at the functionalized nanoparticles with succinic anhydride (SA) in non-aqueous medium, and (ii) by reacting the APMS and SA first, followed by grafting of the carboxyl-terminated reagent onto the nanoparticle surfaces. Using the first method, the SA only reacted with the terminal primary amino groups (–NH 2 ) of the surface-grafted APMS molecules. Infra-red spectroscopy (ATR FTIR) and mass spectrometry (HRMS) showed that the second method enables the bonding of up to two SA molecules per one APMS molecule, since the SA reacted with both the primary (–NH 2 ) and secondary amino (–NH–) groups of the APMS molecule. When using both methods, the ratio between the surface amino and carboxyl groups can be controlled.

Agentes de saúde em comunidades urbanas Community-based health workers in urban areas

Directory of Open Access Journals (Sweden)

João Cláudio L. Fernandes

1992-06-01

Full Text Available A utilização de agentes comunitários nos programas de atenção primária à saúde é uma experiência amplamente difundida, principalmente nos países do Terceiro Mundo. É importante, entretanto, discriminar o perfil de atuação destes agentes em função da área onde atuam, principalmente no que diz respeito às diferenças entre o meio rural e o urbano. A simples substituição de profissionais de medicina, odontologia, psicologia etc, por agentes comunitários pode significar uma abordagem limitada do conceito de atenção primária, levando ao desenvolvimento de modelos assistenciais distintos, determinados em função da classe social a que se dirigem. Neste artigo, é apontada a necessidade de formação de recursos humanos de nível superior para a atenção primária à saúde, buscando-se também identificar o lugar dos agentes comunitários nesta área, sua especificidade técnica, bem como alguns obstáculos percebidos neste campo profissional.The employment of community-based health workers (CHWs in primary health care projects is a widespread experience, mainly in Third World countries. However, it is important to differentiate between the rural and urban profiles of these professionals. The replacement of medical/odontological/psychological professionals by CHWs alone may represent a limited approach to primary health care problems, leading to the development of different health care patterns, depending on the social class they are addressed. This paper points to need for the qualification of high-level health personnel also trying to identify the location of CHWs in this field, their technical specificity, as well as some difficulties observed in this practice.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

Energy Technology Data Exchange (ETDEWEB)

Lindborg, Tobias [ed.

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions.

Description of surface systems. Preliminary site description Simpevarp sub area - Version 1.2

International Nuclear Information System (INIS)

Lindborg, Tobias

2005-03-01

Swedish Nuclear Fuel and Waste Management Co is currently conducting site characterisation in the Simpevarp area. The area is divided into two subareas, the Simpevarp and the Laxemar subarea. The two subareas are surrounded by a common regional model area, the Simpevarp area. This report describes both the regional area and the subareas. This report is an interim version (model version 1.2) of the description of the surface systems at the Simpevarp area, and should be seen as a background report to the site description of the Simpevarp area, version 1.2, SKB-R--05-08. The basis for this description is quality-assured field data available in the SKB SICADA and GIS databases, together with generic data from the literature. The Surface system, here defined as everything above the bedrock, comprises a number of separate disciplines (e.g. hydrology, geology, topography, oceanography and ecology). Each discipline has developed descriptions and models for a number of properties that together represent the site description. The current methodology for developing the surface system description and the integration to ecosystem models is documented in a methodology strategy report SKB-R--03-06. The procedures and guidelines given in that report were followed in this report. Compared with version 1.1 of the surface system description SKB-R--04-25, this report presents considerable additional features, especially in the ecosystem description (Chapter 4) and in the description of the surface hydrology (Section 3.4). A first attempt has also been made to connect the flow of matter (carbon) between the different ecosystems into an overall ecosystem model at a landscape level. A summarised version of this report is also presented in SKB-R--05-08 together with geological-, hydrogeological-, transport properties-, thermal properties-, rock mechanics- and hydrogeochemical descriptions

Effect of Saturated Near Surface on Nitrate and Ammonia Nitrogen Losses in Surface Runoff at the Loess Soil Hillslope

Directory of Open Access Journals (Sweden)

Yu-bin Zhang

2010-01-01

Full Text Available Water pollution from agricultural fields is a global problem and cause of eutrophication of surface waters. A laboratory study was designed to evaluate the effects of near-surface hydraulic gradients on NO3–N and NH4–N losses in surface runoff from soil boxes at 27% slope undersimulated rainfall of a loess soil hillslope. Experimental treatments included two near-surface hydraulic gradients (free drainage, FD; saturation, SA, three fertilizer application rates (control, no fertilizer input; low, 120 kg N ha-1; high, 240 kg N ha-1, and simulated rainfall of 100 mm h-1 was applied for 70 min. The results showed that saturated near-surface soil moisture had dramatic effects on NO3–N and NH4–N losses and water quality. Under the low fertilizer treatment, average NO3–N concentrations in runoff water of SA averaged 2.2 times greater than that of FD, 1.6 times greater for NH4–N. Under the high fertilizer treatment, NO3–N concentrations in runoff water from SA averaged 5.7 times greater than that of FD, 4.3 times greater for NH4–N. Nitrogen loss formed with NO3–N is dominant during the event, but not NH4–N. Under the SA condition, the total loss of NO3–N from low fertilizer treatment was 34.2 to 42.3% of applied nitrogen, while under the FD treatment that was 3.9 to 6.9%. However, the total loss of NH4–N was less than 1% of applied nitrogen. These results showed that saturated condition could make significant contribution to water quality problems.

Hortas comunitárias como atividade promotora de saúde: uma experiência em Unidades Básicas de Saúde

Directory of Open Access Journals (Sweden)

Christiane Gasparini Araújo Costa

2015-10-01

Full Text Available ResumoA agricultura urbana e periurbana (AUP vem sendo praticada em diferentes espaços, contribuindo para a melhoria da saúde nas comunidades e ambientes mais saudáveis. Objetivando identificar significados e repercussões da prática da AUP em Unidades Básicas de Saúde (UBS, enquanto uma atividade de Promoção da Saúde (PS, e em que medida sua dimensão terapêutica a caracteriza como uma atividade alinhada às práticas integrativas e complementares, foi realizado um estudo transversal com abordagem qualitativa no município de Embu das Artes, SP. Da análise, emergiram as seguintes categorias: concepção de saúde, resultados na saúde, resgate de práticas e hábitos tradicionais e reorientação dos serviços de saúde. Identificou-se a estreita ligação entre a prática das hortas e as diretrizes e campos de ação da PS como: criação de ambientes saudáveis, reforço da ação comunitária, desenvolvimento de habilidades pessoais, estímulo à autonomia e empoderamento e demandas por reorientação dos serviços. As atividades de horta instituídas nas UBS se mostraram uma estratégia de implementação das práticas integrativas e complementares (PIC. Conclui-se que as atividades de cultivo nas hortas comunitárias mostram-se como práticas promotoras da saúde que integram elementos fundamentais das PIC.

Saúde oral: um desafio para a equipe de saúde

Directory of Open Access Journals (Sweden)

Vera Lúcia de Oliveira Gomes

2001-03-01

Full Text Available Esta pesquisa teve como objetivo desvelar o conhecimento dos formandos dos cursos de Enfermagem e Medicina de uma Universidade do Rio Grande do Sul acerca da promoção da Saúde Oral. Participaram do estudo 58 acadêmicos, sendo 26 do Curso de Enfermagem e 32 do Curso de Medicina, estes responderam a um questionário com três perguntas semi-estruturadas. Através da triangulação constatamos que esse conhecimento entre os formandos dos referidos cursos é deficitário. Sabemos que é grande a dificuldade de acesso da população infantil carente aos gabinetes dentários, por esse motivo, acreditamos ser indispensável que os profissionais de Enfermagem e Medicina tenham conhecimentos referentes à promoção de saúde oral em crianças.

A política de saúde bucal em pauta no Conselho Municipal de Saúde no Município de Nova Friburgo - RJ

Directory of Open Access Journals (Sweden)

Rafael Gomes Ditterich

Full Text Available Objetivo O presente estudo teve como objetivo analisar, por meio dos documentos técnicos do Conselho Municipal de Saúde (CMS, a organização dos serviços de saúde bucal no Município de Nova Friburgo - RJ, a partir da institucionalização da Política Nacional de Saúde Bucal. Metodologia Para a análise documental, utilizou-se o registro de frequência e categorização por assunto: saúde bucal das atas do CMS de junho/2006 a agosto/2011, do Plano Municipal de Saúde de 2003-2005 e 2010-2013, e os documentos encaminhados entre 2005 e 2011. Resultado Os registros analisados até 2012 indicaram que a população estava desassistida na questão da média complexidade, como também no acesso à água fluoretada. As equipes de saúde bucal ainda não tinham sido qualificadas e ampliadas, como é bem colocado como prioridade no Brasil Sorridente. O Município ainda não desenvolvia programas de prevenção e promoção de saúde bucal de forma contínua e efetiva. Conclusão Concluiu-se que a Política Nacional de Saúde Bucal, até o ano de 2012, não tinha ainda reflexo nas ações de saúde bucal em Nova Friburgo.

Heavy metal contamination in surface runoff sediments of the urban area of Vilnius, Lithuania

Directory of Open Access Journals (Sweden)

Gytautas Ignatavičius

2017-02-01

Full Text Available Surface runoff from urbanized territories carries a wide range of pollutants. Sediments in untreated runoff from direct discharge stormwater systems significantly contribute to urban waterway pollution. In this study, heavy metal (Pb, Zn, Cu, Cr, Ba, As and Fe contamination in surface runoff sediments of the urban area of the city of Vilnius was investigated. The surface runoff sediment samples were collected from seven dischargers with the highest volume rate of water flow and concentrations of suspended solids. The geospatial analysis of the distribution of heavy metals shows that there are several active pollution sources supplying the dischargers with contaminated sediments. Most of these areas are located in the central part of the city and in old town with intense traffic. Principal components analysis and t-test results clearly depicted the significantly different chemical compositions of winter and autumn surface sediment samples. The sampling approach and assessment of results provide a useful tool to examine the contamination that is generated in urban areas, distinguish pollution sources and give a better understanding of the importance of permeable surfaces and green areas.

A proposta da educação permanente em saúde na atualização da equipe de saúde em diabetes mellitus

OpenAIRE

Rodrigues,Andreia Cristinha Seabra; Vieira,Gisele de Lacerda Chaves; Torres,Heloisa de Carvalho

2010-01-01

O objetivo do estudo foi relatar a experiência da Educação Permanente em Saúde na atualização da equipe de saúde de uma Unidade Básica de Saúde para a atenção integral e humanizada às pessoas com diabetes tipo 2. A metodologia de escolha para a capacitação das equipes de saúde foi a Educação em Permanente em Saúde, por meio de oficinas educativas em diabetes com enfoque na problematização do processo educativo e profissional. Buscou-se, assim, construir um programa de educação em diabetes vis...

Acupuntura e promoção de saúde: possibilidades no serviço público de saúde

Directory of Open Access Journals (Sweden)

Maria Elisa Rizzi Cintra

2010-03-01

Full Text Available O presente estudo objetivou analisar as possíveis contribuições da Acupuntura aplicada nos serviços públicos de saúde do município de São Paulo para a Promoção da Saúde. Foi utilizada a abordagem qualitativa de pesquisa, com uso de entrevistas em profundidade. Os resultados apontam que a Acupuntura praticada nos serviços públicos permite um trânsito interdisciplinar integrando a percepção do indivíduo sobre si mesmo e seu contexto, possibilitando mudanças nas causas primárias das doenças. Assim, o contato com a Acupuntura praticada nos serviços de saúde da rede municipal de São Paulo mostra-se passível de contribuir para o desenvolvimento de ações de Promoção de Saúde.

O impacto do trabalho infantil no setor agrícola sobre a saúde

Directory of Open Access Journals (Sweden)

Alexandre Chibebe Nicolella

2008-09-01

Full Text Available O objetivo desse artigo é verificar se o trabalho infantil no setor agrícola produz impacto negativo sobre a saúde. Para a análise foram utilizadas as PNADs (Pesquisas Nacionais por Amostra de Domicílios de 1998 e 2003, que trazem suplemento especial sobre saúde, empregando a técnica econométrica de pseudo-painel. Assim, foram consideradas as crianças de 5 a 15 anos em 1998 e de 10 a 20 anos em 2003. Os resultados mostram que, para os indivíduos economicamente ativos, a atividade no setor agrícola e o trabalho de risco no setor agrícola não diferem dos outros setores, ou seja, trabalhar no setor agrícola não impõe um maior desgaste à saúde em relação aos outros setores da economia. Se considerados todos os indivíduos economicamente ativos, os resultados mostram que o trabalho agrícola não afeta a saúde e que o trabalho não-agrícola tem impacto negativo. Dessa forma, acredita-se que a atuação do governo deve ser setorial, visando uma melhoria no acesso ao sistema de saúde, bem como aos medicamentos, e a promoção da educação materna com relação à saúde.The aim of this dissertation is to identify the causal relation between rural child labour and health. The analysis utilized the PNAD, a Brazilian household survey, from 1998 and 2003. The econometric modeling was based on the pseudo-panel approach and was considered the children from 5 to 15 years old in 1998 and from 10 to 20 years old in 2003. The results show that work and work in risky jobs in the agricultural sector do not differ from those impacts of other sectors. It was also presented, for all individuals that work in the agricultural sector does not impact the health capital and work in the non rural sector impact negatively the health capital. So, the government intervention in rural areas should be different from the one implemented on the urban area to mitigate the impact of child labour on health and also, the government intervention should be

Sintering of uranium oxide of high specific surface area

International Nuclear Information System (INIS)

Bel, Alain; Francois, Bernard; Delmas, Roger; Caillat, Roger

1959-01-01

The extent to which a uranium oxide powder deriving from ammonium uranate or uranium peroxide lends itself to the sintering process depends largely on its specific surface area. When this is greater than 5 m 2 / g there is an optimum temperature for sintering in hydrogen. This temperature becomes less as the specific area of the powder is greater. Reprint of a paper published in Comptes rendus des seances de l'Academie des Sciences, t. 249, p. 1045-1047, sitting of 21 September 1959 [fr

Interdependence between body surface area and ultraviolet B dose in vitamin D production

DEFF Research Database (Denmark)

Bogh, M K B; Schmedes, Anne; Philipsen, P A

2011-01-01

Ultraviolet (UV) B radiation increases serum vitamin D level expressed as 25-hydroxyvitamin-D(3) [25(OH)D], but the relationship to body surface area and UVB dose needs investigation.......Ultraviolet (UV) B radiation increases serum vitamin D level expressed as 25-hydroxyvitamin-D(3) [25(OH)D], but the relationship to body surface area and UVB dose needs investigation....

ANALISIS DAYA SAING KEDELAI INDONESIA

Directory of Open Access Journals (Sweden)

Sarwono Sarwono

2014-09-01

Full Text Available RCA (Revealed Comparative Advantage index of soybean in Indonesia from 1983 up to 2013 is less than one, mostly. It means that the competitiveness of soybean in Indonesia is low. The purpose of this study is to analyze the factors influence the soybean competitiveness. OLS (Ordinary Least Square was used as the analysis method. Hypotheses test based on that analysis model is not bias, so that, classic divergence test is needed. It is for getting the Best Linier Unbiased Estimator (BLUE appraisal. T statistic and F statistic were also applied. The result of this research shows that production and export have positive and significant influence. In addition, exchange rate and government policy do not influence the Indonesia soybean competitiveness.Indeks RCA (Revealed Comparative Advantage kedelai Indonesia dari tahun 1983-2013 kecenderungan bernilai kurang dari satu yang berarti daya saing kedelai Indonesia rendah.Penelitian ini bertujuan untuk menganalisis faktor-faktor yang mempengaruhi daya saing kedelai Indonesia.Metode analisis yang digunakan adalah Ordinary Least Square (OLS.Pengujian hipotesis berdasarkan model analisis tersebut tidak bias maka perlu dilakukan uji penyimpangan klasik yang tujuannya agar diperoleh penaksiran yang bersifat Best Linier Unbiased Estimator (BLUE.Pengujian statistik menggunakan uji t statistikdan uji f statistik.Hasil penelitian ini menunjukkan bahwa produksi dan ekspor berpengaruh secara positif dan signifikan terhadap daya saing kedelai Indonesia. Nilai tukar rupiah dan kebijakan pemerintah tidak berpengaruh terhadap daya saing kedelai Indonesia.

Development of a certified reference material for specific surface area of quartz sand

Directory of Open Access Journals (Sweden)

Egor P Sobina

2017-01-01

Full Text Available The paper presents results of conducting research on the development of a certified reference material (CRM for specific surface area of quartz sand, which is practically non-porous and therefore has low specific surface area value ~ 0.8 m2/g. The standard uncertainty due to RM inhomogeneity, the standard uncertainty due to RM instability, as well as the standard uncertainty due to characterization were estimated using the State Primary Standard GET 210‑2014 for Units of Specific Absorption of Gases, Specific Surface Area, Specific Volume, and Pore Size of Solid Substances and Materials. The metrological characteristics of the CRM were determined using a low-temperature gas adsorption method. Krypton was used as an adsorbate to increase measurement accuracy.

30 CFR 903.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by act of Congress. 903.761 Section 903.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, applies to surface coal mining...

Psicologia da saúde crítica no contexto hospitalar

Directory of Open Access Journals (Sweden)

Denis Barros de Carvalho

Full Text Available O texto apresenta uma discussão sobre a Psicologia da saúde no contexto hospitalar a partir de uma perspectiva histórica e ética, mostrando como o desenvolvimento desse campo foi caracterizado pelo surgimento de duas perspectivas: a Psicologia da saúde tradicional e a Psicologia da saúde crítica. O modelo de quatro abordagens à Psicologia da saúde é apresentado e reformulado com a inclusão do conceito de Psicologia sanitária, e a prática em Psicologia da saúde é discutida à luz do conceito de reflexividade. Por fim, alguns questionamentos derivados da Psicologia da saúde crítica são feitos à prática do psicólogo no contexto hospitalar.

ANALISIS DAN MODEL STRATEGI PENINGKATAN DAYA SAING PRODUK EDAMAME BEKU

Directory of Open Access Journals (Sweden)

Sandryas Alief Kurniasanti

2015-03-01

Full Text Available Jember regency is a agricultural and plantation central area. The soybean plant is principal commodity that competes fiercely with production of corn. PT Mitratani Dua Tujuh (PT MT 27 try to find new technology by processing edamame to frozen edamame that focus in the export market. The primary market of frozen edamame besides domestic market is Japan. The aim of this research is to analyze competitiveness and formulated the priority of competitiveness alternative strategy on frozen edamame product in PT MT 27. The research method used is the analysis of competitiveness by using revealed comparative advantage to know the export performance of the product on the world market then analyze a factor of competition by using Diamond Porter's Theory. Alternative strategies are resulted from the SWOT analysis and priorities are determined by using analytical hierarchy process from the expert source. The research results about alternative strategy priority to increase the competitiveness of frozen edamame products in PT MT 27 are: (1 market diversification, (2 product diversification, (3 improve cooperation overseas, (4 develop a research and development division, (5 develop corporate social responsibility, (6 proper financial management, and (7 to develop an agricultural area greenhouse-based to avoid bad weather as tropical country. Managerial implications of this research are expanding existing markets, and develop type of product produced to satisfy the export market and also savings cost production. Keywords: competitiveness, frozen edamame, Mitratani Dua Tujuh, competitiveness strategiesABSTRAKKabupaten Jember merupakan sentra  daerah pertanian dan perkebunan. Tanaman kedelai merupakan komoditas utama yang bersaing ketat dengan produksi jagung. PT Mitratani Dua Tujuh (PT MT 27 mencoba untuk mencari terobosan baru yaitu dengan mengolah edamame menjadi edamame beku siap makan. Pasar utama edamame beku ini selain pasar domestik adalah Jepang. Tujuan

Saúde mental na atenção primária e Saúde Mental Global: perspectivas internacionais e cenário brasileiro

Directory of Open Access Journals (Sweden)

Leandro David Wenceslau

2015-12-01

Full Text Available Este artigo apresenta uma análise teórica sobre a integração da saúde mental na atenção primária sob a perspectiva dos objetivos e estratégias da Saúde Mental Global (Global Mental Health - GMH. Esta tarefa é dividida em duas partes. A primeira parte é dedicada a estudos internacionais de revisão sobre o tema, e a segunda trata de publicações normativas e científicas brasileiras que tocam a questão. Os estudos internacionais ratificam a integração da saúde mental na atenção primária à saúde como estratégia fundamental para o alcance dos objetivos do GMH. No cenário brasileiro, o tema é relevante para as políticas e pesquisas em saúde mental, porém, os objetivos desta integração e suas formas de operacionalização demandam melhor definição. Nas conclusões, apontamos obstáculos para que a APS possa ocupar um papel estratégico para as ações de saúde mental no Sistema Único de Saúde.

A música popular brasileira na construção do conhecimento em Saúde Pública: o tema processo de trabalho e saúde

Directory of Open Access Journals (Sweden)

José Augusto Pina

2014-01-01

Full Text Available Este estudo destaca temas relativos ao trabalho e à saúde na música popular brasileira, especialmente no samba. Tem como objetivo apresentar um corpo de conhecimentos sobre o tema processo de trabalho e saúde. Nas canções selecionadas foram identificadas categorias tomadas como ponto de partida para discussão com a literatura. Com o desenvolvimento do texto, percebe-se o manancial da canção popular para proporcionar conteúdos sobre múltiplas dimensões do processo de trabalho e do processo saúde-doença dos trabalhadores, inclusive a dimensão coletiva e histórica da luta pelo direito à saúde. Esta pesquisa resultou na valorização da música popular brasileira como uma forma de se entenderem as relações trabalho-saúde e de se desenvolver conhecimento em Saúde Coletiva.

30 CFR 942.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by act of Congress. 942.761 Section 942.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 910.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by Act of Congress. 910.761 Section 910.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 937.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

Science.gov (United States)

2010-07-01

... mining by Act of Congress. 937.761 Section 937.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... WITHIN EACH STATE OREGON § 937.761 Areas designated unsuitable for surface coal mining by Act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining and...

30 CFR 921.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by Act of Congress. 921.761 Section 921.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 912.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... mining by act of Congress. 912.761 Section 912.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... WITHIN EACH STATE IDAHO § 912.761 Areas designated unsuitable for surface coal mining by act of Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining and...

30 CFR 947.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by act of Congress. 947.761 Section 947.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 939.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by Act of Congress. 939.761 Section 939.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 941.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by act of Congress. 941.761 Section 941.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 922.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by act of Congress. 922.761 Section 922.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

30 CFR 905.761 - Areas designated unsuitable for surface coal mining by act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by act of Congress. 905.761 Section 905.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated by Act of Congress, shall apply to surface coal mining...

Monitoring of Surface Subsidence of the Mining Area Based on Sbas

Science.gov (United States)

Zhu, Y.; Zhou, S.; Zang, D.; Lu, T.

2018-05-01

This paper has collected 7 scenes of L band PALSAR sensor radar data of a mine in FengCheng city, jiangxi province, using the Small-baseline Subset (SBAS) method to invert the surface subsidence of the mine. Baselines of interference less than 800m has been chosen to constitute short baseline differential interference atlas, using pixels whose average coherent coefficient was larger than or equal to 0.3 as like high coherent point target, using singular value decomposition (SVD) method to calculate deformation phase sequence based on these high coherent points, and the accumulation of settlements of study area of different period had been obtained, so as to reflect the ground surface settlement evolution of the settlement of the area. The results of the study has showed that: SBAS technology has overcome coherent problem of the traditionality D-InSAR technique, continuous deformation field of surface mining in time dimension of time could been obtained, characteristics of ground surface settlement of mining subsidence in different period has been displayed, so to improve the accuracy and reliability of the monitoring results.

Radiative surface temperatures of the burned and unburned areas in a tallgrass prairie

International Nuclear Information System (INIS)

Asrar, G.; Harris, T.R.; Lapitan, R.L.; Cooper, D.I.

1988-01-01

This study was conducted in a natural tallgrass prairie area in the Flint Hills of Kansas. Our objective was to evaluate the surface radiative temperatures of burned and unburned treatments of the grassland as a means of delineating the areas covered by each treatment. Burning is used to remove the senescent vegetation resulting from the previous year's growth. Surface temperatures were obtained in situ and by an airborne scanner. Burned and unburned grass canopies had distinctly different diurnal surface radiative temperatures. Measurements of surface energy balance components revealed a difference in partitioning of the available energy between the two canopies, which resulted in the difference in their measured surface temperatures. The magnitude of this difference is dependent on the time of measurements and topographic conditions. (author)

USING THE CONCEPT OF CORPORATE SOCIAL RESPONSIBILITY IN COMPANIES WITH THE STATE TREASURY BASING ON PORT OF GDYNIA AUTHORITY SA

Directory of Open Access Journals (Sweden)

Agata Kaszuba

2014-06-01

Full Text Available The purpose of the article is to show the importance of CSR in companies with the State Treasury. It can be assumed that these companies should as the first obligatory re-porting of CSR activities, and therefore constitute a specific group of companies. Also as an example, selected in this article - Port of Gdynia Authority SA (PGA SA - due to its activity at the interface of social and economic interests with a strong focus on environ-mental protection, should be highly predisposed to the use CSR. The article identifies ar-eas in which the PGA SA implements CSR and what the barriers and needs associated with it are.

Roles of surface water areas for water and solute cycle in Hanoi city, Viet Nam

Science.gov (United States)

Hayashi, Takeshi; Kuroda, Keisuke; Do Thuan, An; Tran Thi Viet, Nga; Takizawa, Satoshi

2013-04-01

Hanoi city, the capital of Viet Nam, has developed beside the Red river. Recent rapid urbanization of this city has reduced a large number of natural water areas such as lakes, ponds and canals not only in the central area but the suburban area. Contrary, the urbanization has increased artificial water areas such as pond for fish cultivation and landscaping. On the other hand, the urbanization has induced the inflow of waste water from households and various kinds of factories to these water areas because of delay of sewerage system development. Inflow of the waste water has induced eutrophication and pollution of these water areas. Also, there is a possibility of groundwater pollution by infiltration of polluted surface water. However, the role of these water areas for water cycle and solute transport is not clarified. Therefore, this study focuses on the interaction between surface water areas and groundwater in Hanoi city to evaluate appropriate land development and groundwater resource management. We are carrying out three approaches: a) understanding of geochemical characteristics of surface water and groundwater, b) monitoring of water levels of pond and groundwater, c) sampling of soil and pond sediment. Correlation between d18O and dD of precipitation (after GNIP), the Red River (after GNIR) and the water samples of this study showed that the groundwater is composed of precipitation, the Red River and surface water that has evaporation process. Contribution of the surface water with evaporation process was widely found in the study area. As for groundwater monitoring, the Holocene aquifers at two sites were in unconfined condition in dry season and the groundwater levels in the aquifer continued to increase through rainy season. The results of isotopic analysis and groundwater level monitoring showed that the surface water areas are one of the major groundwater sources. On the other hand, concentrations of dissolved Arsenic (filtered by 0.45um) in the pore

An investigation on SA 213-Tube to SA 387-Tube plate using friction welding process

Energy Technology Data Exchange (ETDEWEB)

Rajan, S. Pandia; Kumaraswamidhas, L. A. [Indian Institute of Technology, Jharkhand (India); Kumaran, S. Senthil [RVS School of Engineering and Technology, Tamil Nadu (India); Muthukumaran, S. [National Institute of Technology, Tamil Nadu (India)

2016-01-15

Friction welding of tube to tube plate using an external tool (FWTPET) is a relatively newer solid state welding process used for joining tube to tube plate of either similar or dissimilar materials with enhanced mechanical and metallurgical properties. In the present study, FWTPET has been used to weld SA 213 (Grade T12) tube with SA 387 (Grade 22) tube plate. The welded samples are found to have satisfactory joint strength and the Energy dispersive X-ray analysis (EDX), X-ray diffraction (XRD) study showed that inter metallic compound is absent in the weld zone. The different weld joints have been identified and the phase composition is found using EDX and XRD. Microstructures have been analyzed using optical and Scanning electron microscopy (SEM). The mechanical properties such as hardness, compressive shear strength and peel test for different weld conditions are studied and the hardness survey revealed that there is increase in hardness at the weld interface due to grain refinement. The corrosion behavior for different weld conditions have been analyzed and the weld zone is found to have better corrosion resistance due to the influence of the grain refinement after FWTPET welding process. Hence, the present investigation is carried out to study the behavior of friction welded dissimilar joints of SA 213 tube and SA 387 tube plate joints and the results are presented. The present study confirms that a high quality tube to tube plate joint can be achieved using FWTPET process at 1120 rpm.

Desafios da Saúde Global para a educação de profissionais de saúde: (re)definição de modos de produção de conhecimento em iniciativas de combate às desigualdades de saúde

OpenAIRE

Ferreira, Patrícia Moreira

2013-01-01

O artigo parte da discussão de uma das dimensões associadas à Saúde Global - o seu envolvimento nas dinâmicas de produção de conhecimento “globalizado” sobre saúde, na sua disseminação através de modelos de transferência de conhecimento e implementação em diversos locais ou lugares. Argumenta-se que os programas de educação de profissionais de saúde, inseridos em iniciativas de Saúde Global de combate às desigualdades de saúde, se sustenta em orientações definidas internacionalmente que promo...

Effect of surface area of substrates aiming the optimization of carbon nanotube production from ferrocene

International Nuclear Information System (INIS)

Osorio, A.G.; Bergmann, C.P.

2013-01-01

Highlights: ► An optimized synthesis of CNTs by ferrocene is proposed. ► The surface area of substrates influences the nucleation of CNTs. ► The higher the surface area of substrates the lower the temperature of synthesis. ► Chemical composition of substrates has no influence on the growth of CNTs. - Abstract: Ferrocene is widely used for the synthesis of carbon nanotubes due to its ability to act as catalyst and precursor of the synthesis. This paper proposes an optimization of the synthesis of carbon nanotubes from ferrocene, using a substrate with high surface area for their nucleation. Four different surface areas of silica powder were tested: 0.5, 50, 200 and 300 m 2 /g. Raman spectroscopy and microscopy were used to characterize the product obtained and X-ray diffraction and thermal analysis were also performed to evaluate the phases of the material. It was observed that the silica powder with the highest surface area allowed the synthesis of carbon nanotubes to occur at a lower temperature (600 °C), whereas substrates with a surface area lower than 50 m 2 /g will only form carbon nanotubes at temperatures higher than 750 °C. In order to evaluate the influence of chemical composition of the substrate, three different ceramic powders were analyzed: alumina, silica and zirconia. carbon black and previously synthesized carbon nanotubes were also used as substrate for the synthesis and the results showed that the chemical composition of the substrate does not play a relevant role in the synthesis of carbon nanotubes, only the surface area showed an influence.

Saúde mental e trabalho: os problemas que persistem

Directory of Open Access Journals (Sweden)

Leny Sato

Full Text Available Este artigo toma por objeto a Saúde Mental e Trabalho como uma subárea do campo da Saúde do Trabalhador. Parte da constatação de que os problemas de saúde mental e trabalho, já identificados em meados da década de 1980, persistem. Após retomar a taxonomia de tais problemas, busca evidenciar algumas de suas expressões atuais a partir da assistência e da vigilância em saúde do trabalhador, bem como pela perspectiva de alguns sindicatos mais atentos à questão. Para tal, toma como ponto de partida o Centro de Referência em Saúde do Trabalhador (CRST de Campinas. Por fim, pontua algumas características do trabalho no contexto atual para compreender as motivações dessa persistência.

Surface water and groundwater interaction in selected areas of Indus basin

International Nuclear Information System (INIS)

Akram, W.; Ahmad, M.; Tariq, J.A.; Latif, Z.; Malik, M.R.

2011-08-01

Isotope hydrological investigations were carried out in Marala-Khanki Area of Punjab for elucidating various aspects of surface water and groundwater interaction. Groundwater samples were collected on seasonal basis (low and high river discharge periods) while surface water (Chenab River) samples were collected more frequently (weekly or monthly basis). Isotopic data suggested that there is no significant contribution of surface water to groundwater recharge in Marala-Khanki Area and rain is the prevailing source of groundwater recharge. The data further revealed that isotopic values of Tarbala lake are higher than those of main lake. Indus river meaning that there is significant contribution of base flow in this pocket. Isotopic data of Indus river showed an increase at Tunsa as compared to Chashma in flow period indicating the high contribution of base flow at this point in time. Stable isotopes were successfully used to quantify the base flow contribution. (author)

R4SA for Controlling Robots

Science.gov (United States)

Aghazarian, Hrand

2009-01-01

The R4SA GUI mentioned in the immediately preceding article is a userfriendly interface for controlling one or more robot(s). This GUI makes it possible to perform meaningful real-time field experiments and research in robotics at an unmatched level of fidelity, within minutes of setup. It provides such powerful graphing modes as that of a digitizing oscilloscope that displays up to 250 variables at rates between 1 and 200 Hz. This GUI can be configured as multiple intuitive interfaces for acquisition of data, command, and control to enable rapid testing of subsystems or an entire robot system while simultaneously performing analysis of data. The R4SA software establishes an intuitive component-based design environment that can be easily reconfigured for any robotic platform by creating or editing setup configuration files. The R4SA GUI enables event-driven and conditional sequencing similar to those of Mars Exploration Rover (MER) operations. It has been certified as part of the MER ground support equipment and, therefore, is allowed to be utilized in conjunction with MER flight hardware. The R4SA GUI could also be adapted to use in embedded computing systems, other than that of the MER, for commanding and real-time analysis of data.

Surface area and volume determination of subgingival calculus using laser fluorescence.

Science.gov (United States)

Shakibaie, Fardad; Walsh, Laurence J

2014-03-01

Visible red (655 nm) laser fluorescence (LF) devices are currently used for identifying deposits of subgingival calculus on the root surfaces of teeth during dental examination and treatment; however, it is not known how the fluorescence readings produced by commercially available LF systems correlate to the nature of the deposits. This laboratory study explored the correlation between LF digital readings and the surface area and volume of subgingival calculus deposits on teeth. A collection of 30 extracted human posterior teeth with various levels of subgingival deposits of calculus across 240 sites were used in a clinical simulation, with silicone impression material used to replicate periodontal soft tissues. The teeth were scored by two examiners by using three commercial LF systems (DIAGNOdent, DIAGNOdent Pen and KEY3). The silicone was removed, and the teeth were removed for photography at × 20 magnification under white or ultraviolet light. The surface area, thickness, and volume were calculated, and both linear least squares regression and nonlinear (Spearman's rank method) correlation coefficients were determined. Visible red LF digital readings showed better correlation to calculus volume than to surface area. Overall, the best performance was found for the KEY3 system (Spearman coefficient 0.59), compared to the Classic DIAGNOdent (0.56) and the DIAGNOdent Pen (0.49). These results indicate that while visible red LF systems vary somewhat in performance, their LF readings provide a useful estimation of the volume of subgingival calculus deposits present on teeth.

High-resolution surface analysis for extended-range downscaling with limited-area atmospheric models

Science.gov (United States)

Separovic, Leo; Husain, Syed Zahid; Yu, Wei; Fernig, David

2014-12-01

High-resolution limited-area model (LAM) simulations are frequently employed to downscale coarse-resolution objective analyses over a specified area of the globe using high-resolution computational grids. When LAMs are integrated over extended time frames, from months to years, they are prone to deviations in land surface variables that can be harmful to the quality of the simulated near-surface fields. Nudging of the prognostic surface fields toward a reference-gridded data set is therefore devised in order to prevent the atmospheric model from diverging from the expected values. This paper presents a method to generate high-resolution analyses of land-surface variables, such as surface canopy temperature, soil moisture, and snow conditions, to be used for the relaxation of lower boundary conditions in extended-range LAM simulations. The proposed method is based on performing offline simulations with an external surface model, forced with the near-surface meteorological fields derived from short-range forecast, operational analyses, and observed temperatures and humidity. Results show that the outputs of the surface model obtained in the present study have potential to improve the near-surface atmospheric fields in extended-range LAM integrations.

A Three-Dimensional Enormous Surface Area Aluminum Microneedle Array with Nanoporous Structure

Directory of Open Access Journals (Sweden)

Po Chun Chen

2013-01-01

Full Text Available We proposed fabricating an aluminum microneedle array with a nanochannel structure on the surface by combining micromachining, electrolyte polishing, and anodization methods. The microneedle array provides a three-dimensional (3D structure that possesses several hundred times more surface area than a traditional nanochannel template. Therefore, the microneedle array can potentially be used in many technology applications. This 3D microneedle array device can not only be used for painless injection or extraction, but also for storage, highly sensitive detection, drug delivery, and microelectrodes. From the calculation we made, the microneedle array not only increases surface area, but also enlarges the capacity of the device. Therefore, the microneedle array can further be used on many detecting, storing, or drug delivering applications.

Saúde e meio ambiente nas cidades: os desafios da saúde ambiental

Directory of Open Access Journals (Sweden)

Nelson Gouveia

1999-02-01

Full Text Available Dentro de alguns poucos anos, nosso planeta contará com mais habitantes em áreas urbanas do que em áreas rurais. A urbanização desenfreada, sem mecanismos regulatórios e de controle, típica dos países periféricos, trouxe consigo enormes repercussões na saúde da população. Problemas como a insuficiência dos serviços básicos de saneamento, coleta e destinação adequada do lixo e condições precárias de moradia, tradicionalmente relacionados com a pobreza e o subdesenvolvimento, somam-se agora à poluição química e física do ar, da água e da terra, problemas ambientais antes considerados "modernos". Novamente, é sobre as populações mais carentes que recai a maior parte dos efeitos negativos da urbanização, gerando uma situação de extrema desigualdade e iniqüidade ambiental e em saúde. Para reverter esse quadro é preciso que haja uma reincorporação das questões do meio ambiente nas políticas de saúde, e a integração dos objetivos da saúde ambiental numa ampla estratégia de desenvolvimento sustentável. Uma abordagem mais integrada, com mecanismos intersetoriais que possibilitem um diálogo amplo entre as partes, trará enormes benefícios na conquista de melhores condições de vida nas cidades. A saúde ambiental hoje tem o desafio de promover uma melhor qualidade de vida e saúde nas cidades e a oportunidade de enfrentar o absurdo quadro de exclusão social, sob a perspectiva da eqüidade.In a matter of few years there will be more urban than rural dwellers worldwide. The rapid urbanisation lacking adequate control and regulatory mechanisms typical of developing countries, brought along huge effects to the health of the population Environmental problems traditionally related to poverty and underdevelopment such as insufficient provision of sanitation services, waste collection and disposal, and precarious housing conditions, are now added to environmental problems considered of "modern life" such as the

Investigation on large-area fabrication of vivid shark skin with superior surface functions

Science.gov (United States)

Chen, Huawei; Zhang, Xin; Ma, Lingxi; Che, Da; Zhang, Deyuan; Sudarshan, T. S.

2014-10-01

Shark skin has attracted worldwide attention because of its superior drag reduction, antifouling performance induced from its unique surface morphology. Although the vivid shark skin has been fabricated by a bio-replicated micro-imprinting approach in previous studies and superior drag reduction effect has been validated in water tunnel, continuous large-area fabrication is still an obstacle to wide apply. In this paper, one novel bio-replication coating technology is proposed for large-area transfer of shark skin based on rapid UV curable paint. Apart from design of coating system, bio-replication accuracy of surface morphology was validated about 97% by comparison between shark skin template and coating surface morphology. Finally, the drag reduction and anti-fouling function of coating surface were tested in water tunnel and open algae pond respectively. Drag reduction rate of coating surface was validated about 12% higher and anti-fouling was proved to about hundred times ameliorate, all of which are more excellent than simple 2D riblet surface.

SaLEM (v1.0 – the Soil and Landscape Evolution Model (SaLEM for simulation of regolith depth in periglacial environments

Directory of Open Access Journals (Sweden)

M. Bock

2018-04-01

Full Text Available We propose the implementation of the Soil and Landscape Evolution Model (SaLEM for the spatiotemporal investigation of soil parent material evolution following a lithologically differentiated approach. Relevant parts of the established Geomorphic/Orogenic Landscape Evolution Model (GOLEM have been adapted for an operational Geographical Information System (GIS tool within the open-source software framework System for Automated Geoscientific Analyses (SAGA, thus taking advantage of SAGA's capabilities for geomorphometric analyses. The model is driven by palaeoclimatic data (temperature, precipitation representative of periglacial areas in northern Germany over the last 50 000 years. The initial conditions have been determined for a test site by a digital terrain model and a geological model. Weathering, erosion and transport functions are calibrated using extrinsic (climatic and intrinsic (lithologic parameter data. First results indicate that our differentiated SaLEM approach shows some evidence for the spatiotemporal prediction of important soil parental material properties (particularly its depth. Future research will focus on the validation of the results against field data, and the influence of discrete events (mass movements, floods on soil parent material formation has to be evaluated.

Study of Interdependence of Wind Generation Output and Potential PV Generation in the Area of ENERGA-OPERATOR SA

Directory of Open Access Journals (Sweden)

Michał Bajor

2016-09-01

Full Text Available This paper presents the results of an analysis of the interdependence of wind generation output and photovoltaic generation potential in the ENERGA-OPERATOR SA grid. The first study of the interdependence of these two types of renewable sources’ generation outputs was carried out by the Gdańsk Branch of the Institute of Power Engineering in cooperation with ENERGA-OPERATOR in 2012. An important conclusion of the study was the need to repeat the analysis for a larger set of input data as the study covered the period of one year only, and for obvious reasons a limited number of wind farms. The present study’s inputs included a period of four years and more wind farms, due to the continuous connecting of new facilities to the grid. Thus, the results are characterized by a much higher level of credibility, and allow drawing mor correct conclusions regarding the analysed interdependence. The research on the interdependence of the annual wind generation output and potential generation from photovoltaic sources indicates that both generation types are characterized by mutual spatio-temporal dependency. In the study the relationship was quantified by evaluation of the maximum actual wind generation output in specific areas in the case of high PV generation output in a given area and vice versa. The results may allow for appropriate (i.e. substantiating the modelled operating conditions of the system in relation to reality consideration of both types of sources in various types of system analyses of their impact on the grid performance, such as interconnection studies for new sources and distribution grid development planning.

High Surface Area of Porous Silicon Drives Desorption of Intact Molecules

Science.gov (United States)

Northen, Trent R.; Woo, Hin-Koon; Northen, Michael T.; Nordström, Anders; Uritboonthail, Winnie; Turner, Kimberly L.; Siuzdak, Gary

2007-01-01

The surface structure of porous silicon used in desorption/ionization on porous silicon (DIOS) mass analysis is known to play a primary role in the desorption/ionization (D/I) process. In this study, mass spectrometry and scanning electron microscopy (SEM) are used to examine the correlation between intact ion generation with surface ablation, and surface morphology. The DIOS process is found to be highly laser energy dependent and correlates directly with the appearance of surface ions (Sin+ and OSiH+). A threshold laser energy for DIOS is observed (10 mJ/cm2), which supports that DIOS is driven by surface restructuring and is not a strictly thermal process. In addition, three DIOS regimes are observed which correspond to surface restructuring and melting. These results suggest that higher surface area silicon substrates may enhance DIOS performance. A recent example which fits into this mechanism is silicon nanowires surface which have a high surface energy and concomitantly requires lower laser energy for analyte desorpton. PMID:17881245

O conceito de saúde: ponto-cego da epidemiologia?

OpenAIRE

Almeida Filho,Naomar de

2000-01-01

O trabalho faz uma avaliação da proposição de que o conceito de 'saúde' constitui um ponto-cego para a ciência epidemiológica, postulando que não há base lógica para uma definição negativa da Saúde, tanto no nível individual quanto no coletivo. Também analisa brevemente as tentativas de produzir uma "epidemiologia da saúde" em bases simétricas à epidemiologia dos riscos, bem como as abordagens econométricas que reforçam e complementam o repertório epidemiológico destinado à medida da saúde. F...

Méthodes d’estimation et d’extrapolation des pompages des eaux souterraines par l’intégration des pratiques locales: cas de la plaine du Saïss au Maroc

Directory of Open Access Journals (Sweden)

F. AMEUR

2017-03-01

Full Text Available In the Saïss plain, the access to groundwater enabled the rapid transformation of farming systems (extension of arboriculture and horticulture and the production of wealth. However, these changes affect only a minority of farmers who are able to access and use groundwater. This rapid agricultural development has contributed to the creation of social and economic inequalities, but also to a decline of groundwater tables. The actual groundwater abstractions for agriculture are not monitored and it is difficult to determine the share of different types of farming systems and farmers responsible for the groundwater withdrawals and identify the levers to control groundwater overexploitation. The aim of the paper is to develop and compare four methods to estimate and extrapolate agricultural groundwater withdrawals, distinguishing between uses and users. Our observations show that in the study area (4200 ha in Saïss, located in the province of El Hajeb, the groundwater inequalities are primarily a function of unequal access to land, because 0.5% of the farmers (who are large investors contribute to 27% of the groundwater use, on 33% of the total surface area. Conversely, the beneficiaries of the agrarian reform (26% of the area account for only 14% of the overexploitation. But the land inequality is not always the cause of inequality of groundwater use, since lessees, practicing intensive horticulture, are responsible for 33% of the groundwater use on only 11% of the surface area. We evaluated the appropriateness of different methods of extrapolation of agricultural groundwater use, based on the objectives and the effort required to obtain the necessary data. It is important to make visible inequalities in groundwater use, to analyze the overexploitation issue and enhance the effectiveness of the control of the groundwater use.

Large Area Diamond Tribological Surfaces with Negligible Wear in Extreme Environments, Phase I

Data.gov (United States)

National Aeronautics and Space Administration — In Phase I we propose to demonstrate the processing of very large area diamond sliding bearings and tribological surfaces. The bearings and surfaces will experience...

Accurate measurement of surface areas of anatomical structures by computer-assisted triangulation of computed tomography images

Energy Technology Data Exchange (ETDEWEB)

Allardice, J.T.; Jacomb-Hood, J.; Abulafi, A.M.; Williams, N.S. (Royal London Hospital (United Kingdom)); Cookson, J.; Dykes, E.; Holman, J. (London Hospital Medical College (United Kingdom))

1993-05-01

There is a need for accurate surface area measurement of internal anatomical structures in order to define light dosimetry in adjunctive intraoperative photodynamic therapy (AIOPDT). The authors investigated whether computer-assisted triangulation of serial sections generated by computed tomography (CT) scanning can give an accurate assessment of the surface area of the walls of the true pelvis after anterior resection and before colorectal anastomosis. They show that the technique of paper density tessellation is an acceptable method of measuring the surface areas of phantom objects, with a maximum error of 0.5%, and is used as the gold standard. Computer-assisted triangulation of CT images of standard geometric objects and accurately-constructed pelvic phantoms gives a surface area assessment with a maximum error of 2.5% compared with the gold standard. The CT images of 20 patients' pelves have been analysed by computer-assisted triangulation and this shows the surface area of the walls varies from 143 cm[sup 2] to 392 cm[sup 2]. (Author).

Enhancing performance and surface antifouling properties of polysulfone ultrafiltration membranes with salicylate-alumoxane nanoparticles

Science.gov (United States)

Mokhtari, Samaneh; Rahimpour, Ahmad; Shamsabadi, Ahmad Arabi; Habibzadeh, Setareh; Soroush, Masoud

2017-01-01

To improve the hydrophilicity and antifouling properties of polysulfone (PS) ultrafiltration membranes, we studied the use of salicylate-alumoxane (SA) nanoparticles as a novel hydrophilic additive. The effects of SA nanoparticles on the membrane characteristics and performance were investigated in terms of membrane structure, permeation flux, solute rejection, hydrophilicity, and antifouling ability. The new mixed-matrix membranes (MMMs) possess asymmetric structures. They have smaller finger-like pores and smoother surfaces than the neat PS membranes. The embedment of SA nanoparticles in the polymer matrix and the improvement of surface hydrophilicity were investigated. Ultrafiltration experiments indicated that the pure-water flux of the new MMMs initially increases with SA nanoparticles loading followed by a decrease at high loadings. Higher BSA solution flux was achieved for the MMMs compared to the neat PS membranes. Membranes with 1 wt.% SA nanoparticles exhibit the highest flux recovery ratio of 87% and the lowest irreversible fouling of 13%.

Desenvolvimento econômico, desigualdade e saúde

Directory of Open Access Journals (Sweden)

Prata Pedro Reginaldo

1994-01-01

Full Text Available O autor se refere a dimensão socioeconômica, individual e coletiva do fenômeno saúde-doença. Refere-se também ao fato das populações estarem sobre a influência desigual de fatores de risco e de proteção à saúde. Discute as desigualdades no desenvolvimento e a relação entre desenvolvimento, riqueza, saúde e justiça social. Questiona as teorias de desenvolvimento econômico, diferenciando desenvolvimento de crescimento. Cunha os conceitos de armadilha do desenvolvimento e refugiados sociais. Define uma comunidade saudável. Propõe a necessidade de mudança no modelo de desenvolvimento. Baliza o papel e as limitações do setor saúde no que diz respeito a iniqüidade social.

As travestis no Programa Saúde da Família da Lapa Transvestites in the Family Health Program of Lapa

Directory of Open Access Journals (Sweden)

Valéria Ferreira Romano

2008-06-01

Full Text Available Este texto apresenta o relato de experiência sobre o acolhimento das travestis no Programa Saúde da Família Lapa (PSF-Lapa, uma unidade de saúde de atenção básica, situada no bairro da Lapa, centro do Município do Rio de Janeiro. O PSF-Lapa é parte integrante do curso de Medicina da Universidade Estácio de Sá, em parceria com a Secretaria Municipal de Saúde do Rio de Janeiro, servindo de cenário de ensino-aprendizagem dos alunos do curso de Medicina e de outras áreas da saúde da universidade. Apoiada no fato de que o acesso das travestis aos serviços de saúde pública tem sido pautado pelo preconceito tanto de profissionais quanto de usuários, tece considerações sobre a humanização da relação aluno - profissionais de saúde - usuários, no que concerne ao direito à saúde. Relata as estratégias utilizadas para promover o acolhimento das travestis pela equipe de saúde, pelos usuários e alunos envolvidos, a partir da lógica do respeito à diversidade.This text reports the experience of sheltering transvestites in the Family Health Program of Lapa (PSF-Lapa, a health center that provides basic care, situated in the neighborhood of Lapa, in the downtown area of the city of Rio de Janeiro. PSF-Lapa is an integral part of the Medicine program of UNESA (Estácio de Sá University, in partnership with the Municipal Health Department of Rio de Janeiro. It serves as a teaching-learning scenario for students of the Medicine program and of other health areas of the university. Supported by the fact that the transvestites' access to public health services has been characterized by prejudice on the part of professionals and users, this paper discusses the humanization of the relationship student-health professionals-users, concerning the right to health. It reports the strategies used to promote the sheltering of the transvestites by the health team, users and students involved, based on the logic of respect for diversity.

Representações sociais de saúde bucal entre mães no meio rural de Itaúna (MG, 2002 A social representation study of oral health among mothers in rural areas, Itaúna (MG, 2002

Directory of Open Access Journals (Sweden)

Mauro Henrique Nogueira Guimarães de Abreu

2005-03-01

Full Text Available Análise das representações sociais sobre o processo saúde-doença bucal entre 29 mães de escolares residentes no meio rural de Itaúna, em 2002. As entrevistas semi-estruturadas foram transcritas e a análise de conteúdo foi desenvolvida. A análise mostra que as representações sociais sobre saúde-doença estão vinculadas à alimentação e utilização de serviços médicos. Em relação ao processo saúde-doença bucal, identifica-se um discurso associado às normas odontológicas de higiene e dieta. A cárie dentária é vista como uma experiência inevitável, mas a perda dentária, não. Apesar de as condições materiais de vida no meio rural dificultarem a adoção de práticas consideradas favoráveis à saúde bucal, essas mulheres são cobradas em relação ao trabalho de cuidar dos filhos. Essa vivência contraditória causa sentimentos negativos (culpa e, como conseqüência, queda na qualidade de vida nessa população. Na realidade de vida das entrevistadas, verifica-se que, apesar de as mesmas apresentarem informações sobre o cuidado bucal e desejarem "cuidar dos filhos direito", uma complexa rede de fatores sociais, econômicos, culturais etc., não favorece a promoção de saúde. O planejamento das ações de saúde bucal coletiva deveria levar em consideração não somente dados epidemiológicos quantitativos, mas também as representações sociais sobre saúde bucal.The study evaluated social representation on oral health-illness process between 29 scholarship's mothers in rural areas from Itaúna, in 2002. Semi-structured interviews were transcripted and content analysis was developed. The results have showed that social representation of health-illness was associated with food intake and medical service utilization. Discourse on oral health-illness process was related to dental hygiene and diet rules. Dental caries were an inevitable experience, but tooth loss was not. Despite material conditions of life in

Escaping the correction for body surface area when calculating glomerular filtration rate in children

International Nuclear Information System (INIS)

Piepsz, Amy; Tondeur, Marianne; Ham, Hamphrey

2008-01-01

51 Cr ethylene diamine tetraacetic acid ( 51 Cr EDTA) clearance is nowadays considered as an accurate and reproducible method for measuring glomerular filtration rate (GFR) in children. Normal values in function of age, corrected for body surface area, have been recently updated. However, much criticism has been expressed about the validity of body surface area correction. The aim of the present paper was to present the normal GFR values, not corrected for body surface area, with the associated percentile curves. For that purpose, the same patients as in the previous paper were selected, namely those with no recent urinary tract infection, having a normal left to right 99m Tc MAG3 uptake ratio and a normal kidney morphology on the early parenchymal images. A single blood sample method was used for 51 Cr EDTA clearance measurement. Clearance values, not corrected for body surface area, increased progressively up to the adolescence. The percentile curves were determined and allow, for a single patient, to estimate accurately the level of non-corrected clearance and the evolution with time, whatever the age. (orig.)

Investigation on the micromilled surface characterization through replica technology

DEFF Research Database (Denmark)

Baruffi, Federico; Parenti, P.; Cacciatore, F.

2016-01-01

for the indirect measurement of micromilled surfaces, characterized by submicrometer roughness levels. The study assesses the performance of the replication method by measuring the surface roughness (in terms of Sa) of specifically designed micromilled flat surfaces. A 3D confocal optical microscope is employed...

Pesquisa em saúde, política de saúde e eqüidade na América Latina

Directory of Open Access Journals (Sweden)

Alberto Pellegrini Filho

2004-06-01

Full Text Available O autor analisa as relações entre pesquisa de saúde, políticas de saúde e eqüidade na América Latina. Descreve novas tendências no modo de produção do conhecimento, que permitem maior integração entre as necessidades sociais e a pesquisa, facilitando o vínculo entre esta e o processo de definição de políticas. Analisa as manifestações das novas tendências na América Latina e finaliza com a descrição de algumas iniciativas promovidas pela OPAS no sentido de aproveitar as oportunidades abertas pelas novas tendências para a melhoria das condições de saúde na região. Busca defender a tese de que a informação e o conhecimento são bens públicos essenciais e que as iniqüidades de acesso a esses bens são importantes determinantes das iniqüidades em saúde. Para que as políticas de saúde e as políticas de pesquisa em saúde se integrem e se consolidem como políticas públicas voltadas a atender ao interesse público e à promoção da eqüidade, é necessário o fortalecimento do processo democrático de definição das mesmas, multiplicando os atores envolvidos, os espaços e oportunidades de interação entre eles e instrumentando sua participação com o acesso eqüitativo a informações e conhecimentos científicos pertinentes que permitam a defesa fundamentada de seus interesses.

Can We Trust Real Time Measurements of Lung Deposited Surface Area Concentrations in Dust from Powder Nanomaterials?

DEFF Research Database (Denmark)

Levin, Marcus; Witschger, Olivier; Bau, Sebastien

2016-01-01

A comparison between various methods for real-time measurements of lung deposited surface area (LDSA) using spherical particles and powder dust with specific surface area ranging from 0.03 to 112 m2 g-1 was conducted. LDSA concentrations measured directly using Nanoparticle Surface Area Monitor...... gravimetrical filter measurements and specific surface areas. Measurement of LDSA showed very good correlation in measurements of spherical particles (R2 > 0.97, Ratio 1.0 to 1.04). High surface area nanomaterial powders showed a fairly reliable correlation between NSAM and Aerotrak (R2 0...... present. We conclude that there is currently insufficient reliability and comparability between methods in the measurement of LDSA concentrations. Further development is required to enable use of LDSA for reliable dose metric and regulatory enforcement of exposure....

An investigation on thermal and friction effect produced by friction welding of SA 213 tube to SA 387 tube plate

Directory of Open Access Journals (Sweden)

S. Pandia Rajan

2016-03-01

Full Text Available The present study investigates the effect of thermal and friction produced in the tube to tube plate during the friction welding process by using a Tungsten carbide external tool. In this process, the fictional welding of SA 213 tube and SA 387 tube plate was done by using an external tool. Modeling of tool and wok piece is done by using Solid works and to study the thermal and frictional effect by using Ansys. In this research work, joining of SA 213 tube to SA 387 tube plate was done by using two different techniques such as with hole [WH] and without hole [WOH]. The stress value of with hole and without hole such as 18,782 MPa and 10,486 MPa respectively and the ultimate heat flux generated with hole and without hole such as 0.80475 W/mm2 and 1.1344 W/mm2 respectively were observed.

Studies on the causes of failures in titanium tube condensers of nuclear power plants

International Nuclear Information System (INIS)

Kim, Uh Chul; Kim, Joung Soo; Jang, Soon Sik; Park, Su Hoon; Chung, Han Sub; Hwang, Seong Sik

1990-03-01

All condenser tubes in domestic nuclear power plants using sea water as condenser coolant are Ti material, while water boxes and tubesheets are, respectively, made of carbon steel and Cu-alloys. In this case, to prevent galvanic corrosion occuring between these materials, cathodic protection by an impressed direct current method is being used. Under inappropriate conditions, however, over-protection can generate hydrogen gas on Ti-tube surfaces, which may cause hydrogen embrittlement to the Ti tubes. Therefore, proper conditions for appropriate cathodic protection must be obtained through experiments. Galvanic corrosion between these three different materials was investigated, first. When SA 285 is coupled with Cu or Ti in sea water, under the same surface area, galvanic corrosion rate of SA 285 significantly increases (For example, corrosion rate increment, 2 x 10 -1 → 8 ma for SA 285 coupled with Cu). It was also affected by Cu more than by Ti. In addition, as the surface area ratio of SA 285 to Ti decreases, the corrosion rate of SA 285 increases. This is similar to SA 285-Cu couple. In this case, corrosion rate of SA 285 is higher than that of SA 285-Ti system. For Cu-Ti coulpe, as the surface area ratio of Cu to Ti increases, current density increases slightly up to 1.5 μA/cm 2 , which is very low. (author)

A Three-Dimensional Enormous Surface Area Aluminum Microneedle Array with Nanoporous Structure

International Nuclear Information System (INIS)

Chen, P.Ch.; Zou, J.; Hsieh, Sh.J.; Chen, Ch.Ch.

2013-01-01

We proposed fabricating an aluminum micro needle array with a nano channel structure on the surface by combining micromachining, electrolyte polishing, and anodization methods. The micro needle array provides a three-dimensional (3D) structure that possesses several hundred times more surface area than a traditional nano channel template. Therefore, the micro needle array can potentially be used in many technology applications. This 3D micro needle array device can not only be used for painless injection or extraction, but also for storage, highly sensitive detection, drug delivery, and microelectrodes. From the calculation we made, the micro needle array not only increases surface area, but also enlarges the capacity of the device. Therefore, the micro needle array can further be used on many detecting, storing, or drug delivering applications.

Agroecologia e promoção da saúde no Brasil Agroecology and health promotion in Brazil

Directory of Open Access Journals (Sweden)

Elaine de Azevedo

2012-04-01

Full Text Available OBJETIVO: Pesquisar como os especialistas da promoção de saúde e da agroecologia compreendem os conceitos dessas áreas de diretrizes comuns e como é concebida a relação entre tais conceitos. MÉTODOS: Pesquisa qualitativa. Foram realizadas entrevistas com 14 especialistas das duas áreas sobre relações entre sistema agroalimentar e saúde; conceitos de agroecologia e promoção da saúde; relevância da inserção da agroecologia nos cursos de formação de saúde pública e vice-versa. RESULTADOS: Existe pouco diálogo entre os campos de estudo que foram considerados afins, sendo a qualidade do alimento a principal interface entre as áreas. A agroecologia apareceu como um sistema de produção de alimentos saudáveis, mas o estudo mostrou outras relações: agroecologia e empowerment, fomento à autonomia e qualidade de vida e melhores condições socioeconômicas para o agricultor; agroecologia e saúde ambiental; agroecologia e participação social; agroecologia, territorialidade e resgate cultural; agroecologia, alimentos locais e baixo custo produtivo. Já a promoção de saúde foi essencialmente relacionada a práticas voltadas à manutenção de estilos de vida saudável. Os especialistas mostraram-se favoráveis à inserção de conhecimentos da área da saúde pública na agroecologia e vice-versa. CONCLUSÕES: A agroecologia e a promoção da saúde são áreas contributivas e complementares, cuja aproximação pode vir a enriquecer a discussão da saúde rural e a concepção das políticas públicas que se debruçam sobre essa temática, estimulando intervenções e práticas intersetoriais.OBJECTIVE: Research how specialists in health promotion and agroecology understand the concepts in those areas of common guidelines and how the relationship between such concepts is conceived. METHODS. Qualitative research. Fourteen specialists in the two areas were interviewed about the relationship between the agrofood system and

St. Louis area earthquake hazards mapping project; seismic and liquefaction hazard maps

Science.gov (United States)

Cramer, Chris H.; Bauer, Robert A.; Chung, Jae-won; Rogers, David; Pierce, Larry; Voigt, Vicki; Mitchell, Brad; Gaunt, David; Williams, Robert; Hoffman, David; Hempen, Gregory L.; Steckel, Phyllis; Boyd, Oliver; Watkins, Connor M.; Tucker, Kathleen; McCallister, Natasha

2016-01-01

We present probabilistic and deterministic seismic and liquefaction hazard maps for the densely populated St. Louis metropolitan area that account for the expected effects of surficial geology on earthquake ground shaking. Hazard calculations were based on a map grid of 0.005°, or about every 500 m, and are thus higher in resolution than any earlier studies. To estimate ground motions at the surface of the model (e.g., site amplification), we used a new detailed near‐surface shear‐wave velocity model in a 1D equivalent‐linear response analysis. When compared with the 2014 U.S. Geological Survey (USGS) National Seismic Hazard Model, which uses a uniform firm‐rock‐site condition, the new probabilistic seismic‐hazard estimates document much more variability. Hazard levels for upland sites (consisting of bedrock and weathered bedrock overlain by loess‐covered till and drift deposits), show up to twice the ground‐motion values for peak ground acceleration (PGA), and similar ground‐motion values for 1.0 s spectral acceleration (SA). Probabilistic ground‐motion levels for lowland alluvial floodplain sites (generally the 20–40‐m‐thick modern Mississippi and Missouri River floodplain deposits overlying bedrock) exhibit up to twice the ground‐motion levels for PGA, and up to three times the ground‐motion levels for 1.0 s SA. Liquefaction probability curves were developed from available standard penetration test data assuming typical lowland and upland water table levels. A simplified liquefaction hazard map was created from the 5%‐in‐50‐year probabilistic ground‐shaking model. The liquefaction hazard ranges from low (60% of area expected to liquefy) in the lowlands. Because many transportation routes, power and gas transmission lines, and population centers exist in or on the highly susceptible lowland alluvium, these areas in the St. Louis region are at significant potential risk from seismically induced liquefaction and associated

Saúde ambiental : a articulação entre saúde e ambiente na política de saúde ambiental como estratégia de governo da população

OpenAIRE

Doris Soares Blessmann

2010-01-01

Esta dissertação apresenta uma discussão acerca de como uma política pública de saúde opera para a regulação de riscos ambientais que incidem sobre a população. Para tanto, examinei formulações inseridas na Política Nacional de Saúde Ambiental (PNSA) e da Vigilância Ambiental em Saúde (VAS). Ancorada nos pressupostos de Foucault, realizo dois movimentos de pesquisa. Numa perspectiva histórica, analiso as políticas mundiais e brasileiras implicadas na construção da VAS e da PNSA. Examino, a se...

Fonoaudiologia em saúde pública

Directory of Open Access Journals (Sweden)

Regina M. Freire

1992-06-01

Full Text Available Objetivou-se obter o entendimento das funções do fonoaudiólogo enquanto profissional da saúde. Discutem-se as dificuldades ligadas à implantação de um serviço novo, estranho às Unidades Básicas de Saúde. A seguir, analisa-se a demanda pelo serviço de Fonoaudiologia em postos de saúde, e verifica-se que 32% da população que busca esse serviço está em idade escolar e vem encaminhada pelas escolas, com queixa de problemas de aprendizagem. Uma aproximação maior dessas crianças, através do atendimento fonoaudiológico, delineia uma outra realidade: a de que não se pode considerar como distúrbio/desvio/problema/patologia marcas gráficas que se constituem como indícios do choque entre o processo de letramento e o de alfabetização. Entendendo a problemática do ponto de vista da saúde pública, propõe-se um programa de atendimento ao professor, cujo objetivo é o esclarecimento da escola com relação ao seu papel de co-construtora do processo de letramento da criança, devolvendo-lhe a responsabilidade pelo sucesso e/ou fracasso da alfabetização.

Fonoaudiologia em saúde pública

Directory of Open Access Journals (Sweden)

Freire Regina M.

1992-01-01

Full Text Available Objetivou-se obter o entendimento das funções do fonoaudiólogo enquanto profissional da saúde. Discutem-se as dificuldades ligadas à implantação de um serviço novo, estranho às Unidades Básicas de Saúde. A seguir, analisa-se a demanda pelo serviço de Fonoaudiologia em postos de saúde, e verifica-se que 32% da população que busca esse serviço está em idade escolar e vem encaminhada pelas escolas, com queixa de problemas de aprendizagem. Uma aproximação maior dessas crianças, através do atendimento fonoaudiológico, delineia uma outra realidade: a de que não se pode considerar como distúrbio/desvio/problema/patologia marcas gráficas que se constituem como indícios do choque entre o processo de letramento e o de alfabetização. Entendendo a problemática do ponto de vista da saúde pública, propõe-se um programa de atendimento ao professor, cujo objetivo é o esclarecimento da escola com relação ao seu papel de co-construtora do processo de letramento da criança, devolvendo-lhe a responsabilidade pelo sucesso e/ou fracasso da alfabetização.

Large-area homogeneous periodic surface structures generated on the surface of sputtered boron carbide thin films by femtosecond laser processing

Energy Technology Data Exchange (ETDEWEB)

Serra, R., E-mail: ricardo.serra@dem.uc.pt [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra (Portugal); Oliveira, V. [ICEMS-Instituto de Ciência e Engenharia de Materiais e Superfícies, Avenida Rovisco Pais no 1, 1049-001 Lisbon (Portugal); Instituto Superior de Engenharia de Lisboa, Avenida Conselheiro Emídio Navarro no 1, 1959-007 Lisbon (Portugal); Oliveira, J.C. [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra (Portugal); Kubart, T. [The Ångström Laboratory, Solid State Electronics, P.O. Box 534, SE-751 21 Uppsala (Sweden); Vilar, R. [Instituto Superior de Engenharia de Lisboa, Avenida Conselheiro Emídio Navarro no 1, 1959-007 Lisbon (Portugal); Instituto Superior Técnico, Avenida Rovisco Pais no 1, 1049-001 Lisbon (Portugal); Cavaleiro, A. [SEG-CEMUC, Mechanical Engineering Department, University of Coimbra, Rua Luís Reis Santos, 3030-788 Coimbra (Portugal)

2015-03-15

Highlights: • Large-area LIPSS were formed by femtosecond laser processing B-C films surface. • The LIPSS spatial period increases with laser fluence (140–200 nm). • Stress-related sinusoidal-like undulations were formed on the B-C films surface. • The undulations amplitude (down to a few nanometres) increases with laser fluence. • Laser radiation absorption increases with surface roughness. - Abstract: Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm{sup 2}. Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under

Large-area homogeneous periodic surface structures generated on the surface of sputtered boron carbide thin films by femtosecond laser processing

International Nuclear Information System (INIS)

Serra, R.; Oliveira, V.; Oliveira, J.C.; Kubart, T.; Vilar, R.; Cavaleiro, A.

2015-01-01

Highlights: • Large-area LIPSS were formed by femtosecond laser processing B-C films surface. • The LIPSS spatial period increases with laser fluence (140–200 nm). • Stress-related sinusoidal-like undulations were formed on the B-C films surface. • The undulations amplitude (down to a few nanometres) increases with laser fluence. • Laser radiation absorption increases with surface roughness. - Abstract: Amorphous and crystalline sputtered boron carbide thin films have a very high hardness even surpassing that of bulk crystalline boron carbide (≈41 GPa). However, magnetron sputtered B-C films have high friction coefficients (C.o.F) which limit their industrial application. Nanopatterning of materials surfaces has been proposed as a solution to decrease the C.o.F. The contact area of the nanopatterned surfaces is decreased due to the nanometre size of the asperities which results in a significant reduction of adhesion and friction. In the present work, the surface of amorphous and polycrystalline B-C thin films deposited by magnetron sputtering was nanopatterned using infrared femtosecond laser radiation. Successive parallel laser tracks 10 μm apart were overlapped in order to obtain a processed area of about 3 mm 2 . Sinusoidal-like undulations with the same spatial period as the laser tracks were formed on the surface of the amorphous boron carbide films after laser processing. The undulations amplitude increases with increasing laser fluence. The formation of undulations with a 10 μm period was also observed on the surface of the crystalline boron carbide film processed with a pulse energy of 72 μJ. The amplitude of the undulations is about 10 times higher than in the amorphous films processed at the same pulse energy due to the higher roughness of the films and consequent increase in laser radiation absorption. LIPSS formation on the surface of the films was achieved for the three B-C films under study. However, LIPSS are formed under different

O complexo industrial da saúde e a necessidade de um enfoque dinâmico na economia da saúde

Directory of Open Access Journals (Sweden)

Carlos Augusto Grabois Gadelha

2003-01-01

Full Text Available O artigo desenvolve um enfoque analítico voltado para o estudo do complexo industrial da saúde, englobando o conjunto das atividades produtivas e suas relações de interdependência, segundo uma perspectiva de economia política e da inovação. A lógica empresarial capitalista penetra em todos os segmentos produtivos, envolvendo tanto as indústrias que já operavam tradicionalmente nessas bases quanto segmentos que possuíam formas de organização em que era possível verificar a convivência de lógicas empresariais com outras que dela se afastavam, como a produção de vacinas e produtos biológicos, fitoderivados e a prestação de serviços de saúde. O artigo analisa a interação entre o sistema de saúde e o sistema econômico-industrial, mostrando como tem havido uma dicotomia na relação entre ambos, que se exprime na deterioração do potencial de inovação do país e numa crescente e preocupante vulnerabilidade externa da política de saúde. Sugere-se que o enfoque neoclássico tradicional da economia da saúde é insuficiente para tratar do complexo industrial da saúde, dada a intensidade do processo de mudança estrutural, e a necessidade de um enfoque teórico alternativo que incorpore a dinâmica de transformação econômica e institucional, de acumulação e de inovação.

O conceito de saúde

Directory of Open Access Journals (Sweden)

Segre Marco

1997-01-01

Full Text Available Questiona-se a atual definição de saúde da Organização Mundial da Saúde: "situação de perfeito bem-estar físico, mental e social" da pessoa, considerada ultrapassada, primeiramente, por visar a uma perfeição inatingível, atentando-se as próprias características da personalidade. Menciona-se como principal sustentação dessa idéia, a renúncia necessária a parte da liberdade pulsional do homem, em troca da menor insegurança propiciada pelo convívio social. Discute-se a validade da distincão entre soma, psique e sociedade, esposando o conceito de homem "integrado", e registrando situações em que a interação entre os três aspectos citados é absolutamente cristalina. É revista a noção de qualidade de vida sob um vértice antipositivista. Essa priorização e proposta de resgate do subjetivismo, reverte a um questionamento da atual definição de saúde, toda ela embasada em avaliações externas, "objetivas", dessa situação.

O conceito de saúde

Directory of Open Access Journals (Sweden)

Marco Segre

1997-10-01

Full Text Available Questiona-se a atual definição de saúde da Organização Mundial da Saúde: "situação de perfeito bem-estar físico, mental e social" da pessoa, considerada ultrapassada, primeiramente, por visar a uma perfeição inatingível, atentando-se as próprias características da personalidade. Menciona-se como principal sustentação dessa idéia, a renúncia necessária a parte da liberdade pulsional do homem, em troca da menor insegurança propiciada pelo convívio social. Discute-se a validade da distincão entre soma, psique e sociedade, esposando o conceito de homem "integrado", e registrando situações em que a interação entre os três aspectos citados é absolutamente cristalina. É revista a noção de qualidade de vida sob um vértice antipositivista. Essa priorização e proposta de resgate do subjetivismo, reverte a um questionamento da atual definição de saúde, toda ela embasada em avaliações externas, "objetivas", dessa situação.

IkusaSA. Integrated Assessment for Sustainability

CSIR Research Space (South Africa)

Scholes, RJ

2012-10-01

Full Text Available , have intended and unintended consequences across a range of important issues. The IkusaSA model system comprises: ? A South African national IAM nested within one or more ?state-of-the-art? global IAMs that predict trade, climate change and human... the country and internationally. The IkusaSA mission is to establish Integrated Assessment Modeling (IAM) in South Africa. The goal is to put in place the tools for an integrated planning approach and provide effective information sharing mechanisms...

Kefir ve Sağlık

OpenAIRE

DAYISOYLU, Kenan Sinan; KÖROĞLU, Özge; BAKIR, Esra; ULUDAĞ, Günsel; KÖROĞLU, Sedat

2015-01-01

Özet: Son yıllarda toplumlar beslenme konusunda giderek daha bilinçli hale gelmektedir. Beslenme konusunda temel talep olan sağlıklı ve güvenli gıdalar tüketebilme isteğinin yanında; insan sağlığına ek faydalar sağlayan, hastalıklardan koruma potansiyeli olan ve fonksiyonel gıda olarak adlandırılan ürünlere ulaşma isteği de giderek artmaktadır. Kefir, fonksiyonel gıdalardan probiyotikler alt kolunun önemli bir üyesi olup, içeriğinde birçok faydalı maya ve bakteri bulunduran, son yıllarda popü...

Letramento funcional em saúde: reflexões e conceitos sobre seu impacto na interação entre usuários, profissionais e sistema de saúde

Directory of Open Access Journals (Sweden)

Maria da Penha Baião Passamai

2012-06-01

Full Text Available Letramento funcional em saúde (LFS é o grau pelo qual os indivíduos têm a capacidade para obter, processar e entender informações básicas e serviços necessários para a tomada de decisões adequadas em saúde. O tema preocupa pesquisadores/profissionais da saúde/formuladores de políticas públicas. Sua natureza interdisciplinar, relacional e interacional indica que o LFS sofre a influência dos sistemas de saúde/educacional, mídia, família, ambiente de trabalho/comunidade/decisão política. Analisam-se conceitos de LFS versus interação usuários-profissionais-sistema de saúde, norteando-se pelas questões: Em que consiste o LFS? Em que medida interfere na comunicação entre usuários, profissionais e sistema de saúde? Quais são suas consequências na saúde pública? Medidas para elevação do LFS devem melhorar as competências individuais e serviços de saúde humanizados, aperfeiçoando suas comunicações, escritas/orais, satisfazendo as necessidades/habilidades dos usuários.

Body surface area prediction in normal, hypermuscular, and obese mice.

Science.gov (United States)

Cheung, Michael C; Spalding, Paul B; Gutierrez, Juan C; Balkan, Wayne; Namias, Nicholas; Koniaris, Leonidas G; Zimmers, Teresa A

2009-05-15

Accurate determination of body surface area (BSA) in experimental animals is essential for modeling effects of burn injury or drug metabolism. Two-dimensional surface area is related to three-dimensional body volume, which in turn can be estimated from body mass. The Meeh equation relates body surface area to the two-thirds power of body mass, through a constant, k, which must be determined empirically by species and size. We found older values of k overestimated BSA in certain mice; thus we determined empirically k for various strains of normal, obese, and hypermuscular mice. BSA was computed from digitally scanned pelts and nonlinear regression analysis was used to determine the best-fit k. The empirically determined k for C57BL/6J mice of 9.82 was not significantly different from other inbred and outbred mouse strains of normal body composition. However, mean k of the nearly spheroid, obese lepr(db/db) mice (k = 8.29) was significantly lower than for normals, as were values for dumbbell-shaped, hypermuscular mice with either targeted deletion of the myostatin gene (Mstn) (k = 8.48) or with skeletal muscle specific expression of a dominant negative myostatin receptor (Acvr2b) (k = 8.80). Hypermuscular and obese mice differ substantially from normals in shape and density, resulting in considerably altered k values. This suggests Meeh constants should be determined empirically for animals of altered body composition. Use of these new, improved Meeh constants will allow greater accuracy in experimental models of burn injury and pharmacokinetics.

Optimized preparation for large surface area activated carbon from date (Phoenix dactylifera L.) stone biomass

International Nuclear Information System (INIS)

Danish, Mohammed; Hashim, Rokiah; Ibrahim, M.N. Mohamad; Sulaiman, Othman

2014-01-01

The preparation of activated carbon from date stone treated with phosphoric acid was optimized using rotatable central composite design of response surface methodology (RSM). The chemical activating agent concentration and temperature of activation plays a crucial role in preparation of large surface area activated carbons. The optimized activated carbon was characterized using thermogravimetric analysis, field emission scanning electron microscopy, energy dispersive X-ray spectroscopy, powder X-ray diffraction, and Fourier transform infrared spectroscopy. The results showed that the larger surface area of activated carbon from date stone can be achieved under optimum activating agent (phosphoric acid) concentration, 50.0% (8.674 mol L −1 ) and activation temperature, 900 °C. The Brunauer–Emmett–Teller (BET) surface area of optimized activated carbon was found to be 1225 m 2  g −1 , and thermogravimetric analysis revealed that 55.2% mass of optimized activated carbon was found thermally stable till 900 °C. The leading chemical functional groups found in the date stone activated carbon were aliphatic carboxylic acid salt ν(C=O) 1561.22 cm −1 and 1384.52 cm −1 , aliphatic hydrocarbons ν(C–H) 2922.99 cm −1 (C–H sym./asym. stretch frequency), aliphatic phosphates ν(P–O–C) 1054.09 cm −1 , and secondary aliphatic alcohols ν(O–H) 3419.81 cm −1 and 1159.83 cm −1 . - Highlights: • RSM optimization was done for the production of large surface area activated carbon. • Two independent variables with two responses were selected for optimization. • Characterization was done for surface area, morphology and chemical constituents. • Optimized date stone activated carbon achieved surface area 1225 m 2  g −1

SA Journal of Radiology

African Journals Online (AJOL)

SA Journal of Radiology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 19, No 2 (2015) >. Log in or Register to get access to full text downloads.

SA Journal of Radiology

African Journals Online (AJOL)

SA Journal of Radiology. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 21, No 1 (2017) >. Log in or Register to get access to full text downloads.

Installation and performance evaluation of an indigenous surface area analyser

International Nuclear Information System (INIS)

Pillai, S.N.; Solapurkar, M.N.; Venkatesan, V.; Prakash, A.; Khan, K.B.; Kumar, Arun; Prasad, R.S.

2014-01-01

An indigenously available surface area analyser was installed inside glove box and checked for its performance by analyzing uranium oxide and thorium oxide powders at RMD. The unit has been made ready for analysis of Plutonium oxide powders after incorporating several important features. (author)

An evaluation of the spring finger solder joints on SA1358-10 and SA2052-4 connector assemblies (MC3617,W87)

International Nuclear Information System (INIS)

Kilgo, Alice C.; Vianco, Paul Thomas; Hlava, Paul Frank; Zender, Gary L.

2006-01-01

The SA1358-10 and SA2052-4 circular JT Type plug connectors are used on a number of nuclear weapons and Joint Test Assembly (JTA) systems. Prototype units were evaluated for the following specific defects associated with the 95Sn-5Sb (Sn-Sb, wt.%) solder joint used to attach the beryllium-copper (BeCu) spring fingers to the aluminum (Al) connector shell: (1) extended cracking within the fillet; (2) remelting of the solder joint during the follow-on, soldering step that attached the EMR adapter ring to the connector shell (and/or soldering the EMR shell to the adapter ring) that used the lower melting temperature 63Sn-37Pb (Sn-Pb) alloy; and (3) spalling of the Cd (Cr) layer overplating layer from the fillet surface. Several pedigrees of connectors were evaluated, which represented older fielded units as well as those assemblies that were recently constructed at Kansas City Plant. The solder joints were evaluated that were in place on connectors made with the current soldering process as well as an alternative induction soldering process for attaching the EMR adapter ring to the shell. Very similar observations were made, which crossed the different pedigrees of parts and processes. The extent of cracking in the top side fillets varied between the different connector samples and likely the EMR adapter ring to the shell. Very similar observations were made, which crossed the different pedigrees of parts and processes. The extent of cracking in the top side fillets varied between the different connector samples and likely reflected the different extents to which the connector was mated to its counterpart assembly. In all cases, the spring finger solder joints on the SA1358-10 connectors were remelted as a result of the subsequent EMR adapter ring attachment process. Spalling of the Cd (Cr) overplating layer was also observed for these connectors, which was a consequence of the remelting activity. On the other hand, the SA2052-4 connector did not exhibit evidence of

Coesão familiar associada à saúde bucal, fatores socioeconômicos e comportamentos em saúde

Directory of Open Access Journals (Sweden)

Luale Leão Ferreira

2013-08-01

Full Text Available Pesquisas sobre saúde geral têm relacionado coesão familiar a fatores socioeconômicos e comportamentais. O objetivo deste estudo foi investigar a associação entre coesão familiar e fatores socioeconômicos, comportamentais e de saúde bucal. Este foi um estudo transversal com amostra por conglomerados em dois estágios. A amostra randomizada de 524 adolescentes era proveniente de escolas públicas da cidade de Piracicaba-SP. As variáveis foram avaliadas por questionários autoaplicáveis e os dados de saúde bucal, pelos índices CPO e CPI. A coesão familiar percebida pelo adolescente foi avaliada por meio da escala de adaptabilidade e coesão familiar. Análise univariada e regressão logística multinominal mostraram que adolescentes com baixa coesão familiar apresentaram mais chance de terem baixa renda (OR 2,28 IC95% 1,14-4,55, presença de cárie (OR 2,23 IC95% 1,21-4,09 e baixa frequência de escovação diária (OR 1,91 IC95% 1,03-3,54. Adolescentes com alta coesão familiar apresentaram mais chance que adolescentes com média coesão de terem alta renda e fator de proteção contra o hábito de tabagismo. Desta forma, a coesão familiar percebida pelo adolescente associou-se com variáveis comportamentais, socioeconômicas e de saúde bucal, indicando a importância de uma abordagem integral da saúde do paciente.

Polydiacetylene liposomes with phenylboronic acid tags: a fluorescence turn-on sensor for sialic acid detection and cell-surface glycan imaging.

Science.gov (United States)

Wang, Dong-En; Yan, Jiahang; Jiang, Jingjing; Liu, Xiang; Tian, Chang; Xu, Juan; Yuan, Mao-Sen; Han, Xiang; Wang, Jinyi

2018-03-01

Sialic acid (SA) located at the terminal end of glycans on cell membranes has been shown to play an important yet distinctive role in various biological and pathological processes. Effective methods for the facile, sensitive and in situ analysis of SA on living cell surfaces are of great significance in terms of clinical diagnostics and therapeutics. Here, a new polydiacetylene (PDA) liposome-based sensor system bearing phenylboronic acid (PBA) and 1,8-naphthalimide derived fluorophore moieties was developed as a fluorescence turn-on sensor for the detection of free SA in aqueous solution and the in situ imaging of SA-terminated glycans on living cell surfaces. In the sensor system, three diacetylene monomers, PCDA-pBA, PCDA-Nap and PCDA-EA, were designed and synthesized to construct the composite PDA liposome sensor. The monomer PCDA-pBA modified with PBA molecules was employed as a receptor for SA recognition, while the monomer PCDA-Nap containing a 1,8-naphthalimide derivative fluorophore was used for fluorescence signaling. When the composite PDA liposomes were formed, the energy transfer between the fluorophore and the conjugated backbone could directly quench the fluorescence of the fluorophore. In the presence of additional SA or SA abundant cells, the strong binding of SA with PBA moieties disturbed the pendent side chain conformation, resulting in the fluorescence restoration of the fluorophore. The proposed methods realized the fluorescence turn-on detection of free SA in aqueous solution and the in situ imaging of SA on living MCF-7 cell surfaces. This work provides a new potential tool for simple and selective analysis of SA on living cell membranes.

An empirical method for estimating surface area of aggregates in hot mix asphalt

Directory of Open Access Journals (Sweden)

R.P. Panda

2016-04-01

Full Text Available Bitumen requirement in hot mix asphalt (HMA is directly dependent on the surface area of the aggregates in the mix, which in turn has effect on the asphalt film thickness and the flow characteristics. The surface area of aggregate blend in HMA is calculated using the specific surface area factors assigned to percentage passing through some specific standard sieve sizes and the imaging techniques. The first process is less capital intensive, but purely manual and labour intensive and prone to human errors. Imaging techniques though eliminating the human errors, still have limited use due to capital intensiveness and requirement of well-established laboratories with qualified technicians. Most of the developing countries like India are shortage of well-equipped laboratories and qualified technicians. To overcome these difficulties, the present mathematical model has been developed to estimate the surface area of aggregate blend of HMA from physical properties of aggregates evaluated using simple laboratory equipment. This model has been validated compared with the existing established methods of calculations and can be used as one of the tools in different developing and under developed countries for proper design of HMA.

Escaping the correction for body surface area when calculating glomerular filtration rate in children

Energy Technology Data Exchange (ETDEWEB)

Piepsz, Amy; Tondeur, Marianne [CHU St. Pierre, Department of Radioisotopes, Brussels (Belgium); Ham, Hamphrey [University Hospital Ghent, Department of Nuclear Medicine, Ghent (Belgium)

2008-09-15

{sup 51}Cr ethylene diamine tetraacetic acid ({sup 51}Cr EDTA) clearance is nowadays considered as an accurate and reproducible method for measuring glomerular filtration rate (GFR) in children. Normal values in function of age, corrected for body surface area, have been recently updated. However, much criticism has been expressed about the validity of body surface area correction. The aim of the present paper was to present the normal GFR values, not corrected for body surface area, with the associated percentile curves. For that purpose, the same patients as in the previous paper were selected, namely those with no recent urinary tract infection, having a normal left to right {sup 99m}Tc MAG3 uptake ratio and a normal kidney morphology on the early parenchymal images. A single blood sample method was used for {sup 51}Cr EDTA clearance measurement. Clearance values, not corrected for body surface area, increased progressively up to the adolescence. The percentile curves were determined and allow, for a single patient, to estimate accurately the level of non-corrected clearance and the evolution with time, whatever the age. (orig.)

Conferências Locais de Saúde de Belo Horizonte: dinâmica, efetividade e contribuições para o Plano Municipal de Saúde

Directory of Open Access Journals (Sweden)

Ana Maria Caldeira Oliveira

Full Text Available RESUMO O objetivo do estudo é analisar a dinâmica e a efetividade das Conferências Locais de Saúde (CLS, realizadas nas Unidades Básicas de Saúde. O estudo ocorreu durante a XII Conferência Municipal de Saúde em outubro de 2013. Foram utilizadas as técnicas de pesquisa de observação participante e análise documental. Verificou-se que as CLS são realizadas de portas abertas, não existindo um número predeterminado de participantes. Além disso, todos têm direito a voz e voto. O estudo conclui pela efetividade das CLS, pois possibilita a discussão das necessidades de saúde pelos usuários, trabalhadores e gestores na atenção primária, legitimando as decisões políticas, assegurando o direito à saúde.

The complete genome sequence of Eubacterium limosum SA11, a metabolically versatile rumen acetogen.

Science.gov (United States)

Kelly, William J; Henderson, Gemma; Pacheco, Diana M; Li, Dong; Reilly, Kerri; Naylor, Graham E; Janssen, Peter H; Attwood, Graeme T; Altermann, Eric; Leahy, Sinead C

2016-01-01

Acetogens are a specialized group of anaerobic bacteria able to produce acetate from CO2 and H2 via the Wood-Ljungdahl pathway. In some gut environments acetogens can compete with methanogens for H2, and as a result rumen acetogens are of interest in the development of microbial approaches for methane mitigation. The acetogen Eubacterium limosum SA11 was isolated from the rumen of a New Zealand sheep and its genome has been sequenced to examine its potential application in methane mitigation strategies, particularly in situations where hydrogenotrophic methanogens are inhibited resulting in increased H2 levels in the rumen. The 4.15 Mb chromosome of SA11 has an average G + C content of 47 %, and encodes 3805 protein-coding genes. There is a single prophage inserted in the chromosome, and several other gene clusters appear to have been acquired by horizontal transfer. These include genes for cell wall glycopolymers, a type VII secretion system, cell surface proteins and chemotaxis. SA11 is able to use a variety of organic substrates in addition to H2/CO2, with acetate and butyrate as the principal fermentation end-products, and genes involved in these metabolic pathways have been identified. An unusual feature is the presence of 39 genes encoding trimethylamine methyltransferase family proteins, more than any other bacterial genome. Overall, SA11 is a metabolically versatile organism, but its ability to grow on such a wide range of substrates suggests it may not be a suitable candidate to take the place of hydrogen-utilizing methanogens in the rumen.

Quality control and biophysical characterisation data of VanSA

Directory of Open Access Journals (Sweden)

C.S. Hughes

2017-10-01

Full Text Available This data article presents the results from quality control experiments including N-terminal sequencing, SEC-MALS and Mass Spectrometry for purified VanSA used in experiments described in (Hughes et al., 2017 [1]; in addition to ligand interaction measurements and thermal melting curves of VanSA in the presence of screened ligands from circular dichroism measurements as well as UV–vis absorbance spectra for the binding interaction of VanSA in the presence of screened ligands.

Práticas de cuidado à saúde de mulheres camponesas

Directory of Open Access Journals (Sweden)

Iraí Maria de Campos Teixeira

2014-12-01

Full Text Available O presente artigo apresenta resultados de pesquisa acerca de práticas de cuidado à saúde de mulheres camponesas do Assentamento Monte Alegre VI – SP. A metodologia, qualitativa, constou de observação participante, entrevistas individuais e coletivas, tendo ocorrido 15 visitas no período de abril de 2010 a julho de 2011. Participaram doze moradoras, das quais, seis agentes comunitárias de saúde. As práticas de cuidado à saúde referem-se a: companheirismo, diálogo, escuta ativa, mobilizações sociais, assistência multiprofissional dos serviços de saúde, uso de plantas medicinais, crença religiosa como apoio social e dietas. Tais práticas somam-se e articulam-se. As participantes ensinam e aprendem sobre o cuidado à saúde nas relações entre elas, nas intergeracionais e nas com os profissionais de saúde, além de recorrerem a outras fontes de informação e outros processos formativos específicos, como do Programa Saúde da Família.

SA FORCES IN THE SECOND WORLD WAR

African Journals Online (AJOL)

was to seek out the enemy armour and de- stroy it. 1 SA Division was to guard the left flank of 7 Armoured Division in this opera- tion, and then advance past Sidi Rezegh to threaten the rear of the enemy investing To- bruk. This would assist the garrison in mak- ing a sortie, and the garrison and 1 SA Divi- sion would link up ...

Estratégia saúde da família e saúde do trabalhador: um diálogo possível?

Directory of Open Access Journals (Sweden)

Francisco Antonio de Castro Lacaz

Full Text Available Reflete-se sobre a omissão de práticas voltadas para a saúde dos trabalhadores no âmbito de atuação da Estratégia Saúde da Família (ESF e propõe-se a inclusão dessas práticas. Considera-se que a mudança do modelo de atenção médico-centrado exige uma nova abordagem que incorpore a análise de elementos da produção de bens, da circulação e do consumo. Fundamenta-se na teoria da determinação social do processo saúde-doença e nas categorias trabalho e reprodução social. Propõe-se que a incorporação da temática Saúde do Trabalhador (ST na ESF seja realizada pela operacionalização de: um instrumento que levante e analise variáveis e indicadores de reprodução social; um sistema de apoio matricial que integre os Centros de Referência em ST com as Unidades Básicas de Saúde; educação permanente das equipes da ESF em conteúdos de ST.

Reflexões sobre a saúde bucal no Brasil

Directory of Open Access Journals (Sweden)

Anya Pimentel Gomes Fernandes Vieira Meyer

2013-12-01

Full Text Available No último século, numerosos avanços em pesquisas e tecnologias biomédicas na área odontológica foram responsáveis por melhorias na saúde e no bem-estar das populações(1. Entretanto, apesar das grandes realizações no âmbito da saúde bucal, muitos problemas ainda permanecem, como a cárie dental, a mais comum das doenças bucais. A prevalência da cárie dentária apresentou uma tendência de declínio nas três últimas décadas do século XX e no início do século XXI, especialmente nos países desenvolvidos, contudo, ainda é considerada uma importante questão de saúde pública mundial, afetando de 60% a 90% das crianças em idade escolar, além da vasta maioria dos adultos(2-4. No levantamento epidemiológico SB Brasil 2010(5, foram observadas melhoras na condição bucal dos brasileiros, porém, ainda é alta a prevalência de cárie. Entre os adolescentes de 15 a 19 anos, por exemplo, a média de dentes afetados foi de 4,25 mais que o dobro do número médio encontrado aos 12 anos. Entre os idosos de 65a 74 anos, o número de dentes cariados, perdidos e obturados (CPO praticamente não se alterou, ficando em 27,5 em 2010, enquanto, em 2003, a média era de 27,8. Em termos internacionais, de acordo com o Ministério da Saúde brasileiro(5,um estudo realizado pela Organização Mundial da Saúde (OMS em 2004 indicou que, nos dados de 188 países, o valor médio do CPO aos 12 anos foi de 1,6, sendonas Américas a média de 2,8, enquanto na Europa ficou em 1,6. Na América do Sul,somente a Venezuela apresentou média de CPO aos 12 anos semelhante à brasileira(2,1. Nos demais países, as médias apresentaram-se mais altas, como na Argentina(3,4, Bolívia (4,7, Colômbia (2,3, Paraguai (2,8 e Peru (3,7. Os achados epidemiológicos de 2010 sobre a saúde bucal no Brasil(5mostraram que o país entrou para o grupo daqueles com baixa prevalência de carie aos 12 anos. Embora os resultados nesse quesito tenham sido animadores, a

Surface water areas significantly impacted 2014 dengue outbreaks in Guangzhou, China

Energy Technology Data Exchange (ETDEWEB)

Tian, Huaiyu; Huang, Shanqian [State Key Laboratory of Remote Sensing Science, College of Global Change and Earth System Science, Beijing Normal University, Beijing (China); Zhou, Sen [Ministry of Education Key Laboratory for Earth System Modelling, Center for Earth System Science, Tsinghua University, Beijing (China); Department of Pediatrics, Harvard Medical School, Boston, MA (United States); Bi, Peng [Discipline of Public Health, University of Adelaide, Adelaide (Australia); Yang, Zhicong, E-mail: yangzc@gzcdc.org.cn [Guangzhou Center for Disease Control and Prevention, Guangzhou (China); Li, Xiujun [School of Public Health, Shandong University, Jinan (China); Chen, Lifan [State Key Laboratory of Remote Sensing Science, College of Global Change and Earth System Science, Beijing Normal University, Beijing (China); Cazelles, Bernard [UMMISCO, UMI 209 IRD – UPMC, 93142 Bondy (France); Eco-Evolutionary Mathematic, IBENS UMR 8197, ENS, 75230 Paris Cedex 05 (France); Yang, Jing [State Key Laboratory of Remote Sensing Science, College of Global Change and Earth System Science, Beijing Normal University, Beijing (China); Luo, Lei; Jing, Qinlong [Guangzhou Center for Disease Control and Prevention, Guangzhou (China); Yuan, Wenping [State Key Laboratory of Earth Surface Processes and Resource Ecology, College of Global Change and Earth System Science, Beijing Normal University, Beijing (China); Pei, Yao; Sun, Zhe [Ministry of Education Key Laboratory for Earth System Modelling, Center for Earth System Science, Tsinghua University, Beijing (China); Yue, Tianxiang [State Key Laboratory of Resources and Environment Information System, Chinese Academy of Sciences, Beijing (China); Kwan, Mei-Po [Department of Geography and Geographic Information Science, University of Illinois at Urbana-Champaign, Champaign, IL 61820 (United States); and others

2016-10-15

Dengue transmission in urban areas is strongly influenced by a range of biological and environmental factors, yet the key drivers still need further exploration. To better understand mechanisms of environment–mosquito–urban dengue transmission, we propose an empirical model parameterized and cross-validated from a unique dataset including viral gene sequences, vector dynamics and human dengue cases in Guangzhou, China, together with a 36-year urban environmental change maps investigated by spatiotemporal satellite image fusion. The dengue epidemics in Guangzhou are highly episodic and were not associated with annual rainfall over time. Our results indicate that urban environmental changes, especially variations in surface area covered by water in urban areas, can substantially alter the virus population and dengue transmission. The recent severe dengue outbreaks in Guangzhou may be due to the surge in an artificial lake construction, which could increase infection force between vector (mainly Aedes albopictus) and host when urban water area significantly increased. Impacts of urban environmental change on dengue dynamics may not have been thoroughly investigated in the past studies and more work needs to be done to better understand the consequences of urbanization processes in our changing world. - Highlights: • Urban dengue outbreak is associated with water area in Guangzhou, 1978–2014. • Surface water area can alter population size of dengue virus in urban area. • Urban dengue outbreak is not associated with annual rainfall in Guangzhou. • Spatiotemporal satellite image fusion can investigate urban environmental change. • Urban environmental change could induce virus, vector, and dengue epidemic change.

Surface water areas significantly impacted 2014 dengue outbreaks in Guangzhou, China

International Nuclear Information System (INIS)

Tian, Huaiyu; Huang, Shanqian; Zhou, Sen; Bi, Peng; Yang, Zhicong; Li, Xiujun; Chen, Lifan; Cazelles, Bernard; Yang, Jing; Luo, Lei; Jing, Qinlong; Yuan, Wenping; Pei, Yao; Sun, Zhe; Yue, Tianxiang; Kwan, Mei-Po

2016-01-01

Dengue transmission in urban areas is strongly influenced by a range of biological and environmental factors, yet the key drivers still need further exploration. To better understand mechanisms of environment–mosquito–urban dengue transmission, we propose an empirical model parameterized and cross-validated from a unique dataset including viral gene sequences, vector dynamics and human dengue cases in Guangzhou, China, together with a 36-year urban environmental change maps investigated by spatiotemporal satellite image fusion. The dengue epidemics in Guangzhou are highly episodic and were not associated with annual rainfall over time. Our results indicate that urban environmental changes, especially variations in surface area covered by water in urban areas, can substantially alter the virus population and dengue transmission. The recent severe dengue outbreaks in Guangzhou may be due to the surge in an artificial lake construction, which could increase infection force between vector (mainly Aedes albopictus) and host when urban water area significantly increased. Impacts of urban environmental change on dengue dynamics may not have been thoroughly investigated in the past studies and more work needs to be done to better understand the consequences of urbanization processes in our changing world. - Highlights: • Urban dengue outbreak is associated with water area in Guangzhou, 1978–2014. • Surface water area can alter population size of dengue virus in urban area. • Urban dengue outbreak is not associated with annual rainfall in Guangzhou. • Spatiotemporal satellite image fusion can investigate urban environmental change. • Urban environmental change could induce virus, vector, and dengue epidemic change.

Intellectual Property and Strategic Agreements (IP/SA) | FNLCR Staging

Science.gov (United States)

IP/SA handles all invention issues including patents and copyrights. All employee inventionreports are filed through the IP/SA office for all activities under the OTS contract.Additionally,request for assignment ofcopyri

Small carpal bone surface area, a characteristic of Turner's syndrome

International Nuclear Information System (INIS)

Cleveland, R.H.; Done, S.; Correia, J.A.; Crawford, J.D.; Kushner, D.C.; Herman, T.E.

1985-01-01

An abnormality which has received little attention but may be easily recognized on radiographs of the hand of patients with Turner's syndrome is described. Eleven of thirty-one patients (35.5%) with Turner's syndrome were shown on radiographs of the hand to have a visually detectable smallness of the bone surface area of the carpus when compared to the area of the second through fifth metacarpals. Values for the ''C/M'' ratio (the area of the carpals divided by the area of the second through fifth metacarpals) were calculated for films of 31 individuals with gonadal dysgenesis and compared with those from bone age-matched films of seventy-six individuals with normal development of the hand and wrist. A consistent difference with minimal overlap was documented. (orig./WL)

Projeto: Ylê ayié yaya ilera (Saúde plena na casa desta existência: equidade e integralidade em saúde para a comunidade religiosa afro-brasileira

Directory of Open Access Journals (Sweden)

Márcia Constância Pinto Aderne Gomes

2010-09-01

Full Text Available A Política Nacional de Saúde Integral da População Negra definiu o conjunto de princípios, diretrizes e objetivos voltados para a melhoria das condições de saúde dessa população, incluindo, entre outras, ações de cuidado e atenção à saúde, visando à promoção da equidade e integralidade em saúde. Este trabalho relata a experiência de implantar um serviço de saúde vinculado a um terreiro de candomblé. Na condução do projeto encontramos apoio de gestores e profissionais, mas surgiram alguns obstáculos (preconceitos, intolerância religiosa, racismo cordial, “invisibilidade”. Iniciamos o diagnóstico de saúde das mulheres e suas famílias e desenvolvemos ações de atenção e de educação em saúde. O desafio que se destaca consiste em estabelecer mecanismos de sustentabilidade, pois o projeto não responde por todas as necessidades do grupo e nos permitiu “abrir um olhar analisador” sobre equidade e integralidade das ações de saúde para a população negra vinculada a religiões de matriz afro-brasileira.

Projeto: Ylê ayié yaya ilera (Saúde plena na casa desta existência: equidade e integralidade em saúde para a comunidade religiosa afro-brasileira

Directory of Open Access Journals (Sweden)

Márcia Constância Pinto Aderne Gomes

Full Text Available A Política Nacional de Saúde Integral da População Negra definiu o conjunto de princípios, diretrizes e objetivos voltados para a melhoria das condições de saúde dessa população, incluindo, entre outras, ações de cuidado e atenção à saúde, visando à promoção da equidade e integralidade em saúde. Este trabalho relata a experiência de implantar um serviço de saúde vinculado a um terreiro de candomblé. Na condução do projeto encontramos apoio de gestores e profissionais, mas surgiram alguns obstáculos (preconceitos, intolerância religiosa, racismo cordial, “invisibilidade”. Iniciamos o diagnóstico de saúde das mulheres e suas famílias e desenvolvemos ações de atenção e de educação em saúde. O desafio que se destaca consiste em estabelecer mecanismos de sustentabilidade, pois o projeto não responde por todas as necessidades do grupo e nos permitiu “abrir um olhar analisador” sobre equidade e integralidade das ações de saúde para a população negra vinculada a religiões de matriz afro-brasileira.

Assembly study for JT-60SA tokamak

Energy Technology Data Exchange (ETDEWEB)

Shibanuma, K., E-mail: shibanuma.kiyoshi@jaea.go.jp [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Arai, T.; Hasegawa, K.; Hoshi, R.; Kamiya, K.; Kawashima, H.; Kubo, H.; Masaki, K.; Saeki, H.; Sakurai, S.; Sakata, S.; Sakasai, A.; Sawai, H.; Shibama, Y.K.; Tsuchiya, K.; Tsukao, N.; Yagyu, J.; Yoshida, K.; Kamada, Y. [Japan Atomic Energy Agency, Naka, Ibaraki-ken 311-0193 (Japan); Mizumaki, S. [Toshiba Corporation, Minato-ku, Tokyo 105-8001 (Japan); and others

2013-10-15

The assembly scenarios and assembly tools of the major tokamak components for JT-60SA are studied in the following. (1) The assembly frame (with a dedicated 30-tonne crane), which is located around the JT-60SA tokamak, is adopted for effective assembly works in the torus hall and the temporary support of the components during assembly. (2) Metrology for precise positioning of the components is also studied by defining the metrology points on the components. (3) The sector segmentation for weld joints and positioning of the vacuum vessel (VV), the assembly scenario and tools for VV thermal shield (TS), the connection of the outer intercoil structure (OIS) and the installation of the final toroidal field coil (TFC) are studied, as typical examples of the assembly scenarios and tools for JT-60SA.

Lp-dual affine surface area forms of Busemann–Petty type problems

Indian Academy of Sciences (India)

Associated with the notion of Lp-intersection body which was defined ... Lp-dual affine surface area; Lp-intersection body; Busemann–Petty ..... [11] Schneider R, Convex Bodies: The Brunn–Minkowski Theory (1993) (Cambridge: Cam-.

Effects of surface roughening of Nafion 117 on the mechanical and physicochemical properties of ionic polymer-metal composite (IPMC) actuators

Science.gov (United States)

Wang, Yanjie; Zhu, Zicai; Liu, Jiayu; Chang, Longfei; Chen, Hualing

2016-08-01

In this paper, the surface of a Nafion membrane was roughened by the sandblasting method, mainly considering the change of sandblasting time and powder size. The roughened surfaces were characterized in terms of their topography from the confocal laser scanning microscope (CLSM) and SEM. The key surface parameters, such as Sa (the arithmetical mean deviation of the specified surface profile), SSA (the surface area ratio before and after roughening) and the area measurement on the histogram from the CLSM images, were extracted and evaluated from the roughened membranes. Also, the detailed change in surface and interfacial electrodes were measured and discussed together with the surface resistance, equivalent modulus, capacitance and performances of IPMC actuators based on the roughened membranes. The results show that a suitable sandblasting condition, resulting in the decrease in the bending stiffness and the increase in the interface area closely related to the capacitance, can effectively increase the electromechanical responses of IPMCs. Although the surface roughening by sandblasting caused a considerable lowering of mechanical strength, it was very effective for enlarging the interfacial area between Nafion membrane and the electrode layers, and for forming a penetrated electrode structure, which facilitated improvement of the surface resistance and capacitance characteristics of IPMCs. In this work, a quantitative relationship was built between the topography of Nafion membrane surface and electromechanical performance of IPMCs by means of sandblasting.

Direito à saúde: um convite à reflexão

Directory of Open Access Journals (Sweden)

Vera Maria Ribeiro Nogueira

2004-06-01

Full Text Available As alterações e rupturas que vêm ocorrendo na sociedade contemporânea em relação ao direito à saúde como valor universal, consoantes às orientações das agências multilaterais veiculadas especialmente a partir dos anos 90, constitui-se o foco central do presente estudo. A partir da gênese dos direitos sociais e do resgate da interdependência entre os aspectos sociais e econômicos na conformação da cidadania social nos países capitalistas democráticos, apresenta os dois paradigmas que delimitam o encaminhamento da atenção à saúde no início do século XXI. O paradigma da cidadania plena, no qual o direito à saúde é um valor universal, e o da cidadania social restrita, em que o direito à saúde é orientado pelo critério da eficiência e racionalidade econômica. Essas proposições alinham-se ao paradigma da economia da saúde, que defende a focalização dos recursos para atenuar as condições de miserabilidade, reduz o papel do Estado, sugere a alocação de recursos para a saúde aliada à proteção social e coloca o mercado como o regulador privilegiado das ações de saúde.

30 CFR 933.761 - Areas designated unsuitable for surface coal mining by Act of Congress.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Areas designated unsuitable for surface coal mining by Act of Congress. 933.761 Section 933.761 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION... Congress. Part 761 of this chapter, Areas Designated Unsuitable for Coal Mining by Act of Congress, with...

A Mathematical Method to Calculate Tumor Contact Surface Area: An Effective Parameter to Predict Renal Function after Partial Nephrectomy.

Science.gov (United States)

Hsieh, Po-Fan; Wang, Yu-De; Huang, Chi-Ping; Wu, Hsi-Chin; Yang, Che-Rei; Chen, Guang-Heng; Chang, Chao-Hsiang

2016-07-01

We proposed a mathematical formula to calculate contact surface area between a tumor and renal parenchyma. We examined the applicability of using contact surface area to predict renal function after partial nephrectomy. We performed this retrospective study in patients who underwent partial nephrectomy between January 2012 and December 2014. Based on abdominopelvic computerized tomography or magnetic resonance imaging, we calculated the contact surface area using the formula (2*π*radius*depth) developed by integral calculus. We then evaluated the correlation between contact surface area and perioperative parameters, and compared contact surface area and R.E.N.A.L. (Radius/Exophytic/endophytic/Nearness to collecting system/Anterior/Location) score in predicting a reduction in renal function. Overall 35, 26 and 45 patients underwent partial nephrectomy with open, laparoscopic and robotic approaches, respectively. Mean ± SD contact surface area was 30.7±26.1 cm(2) and median (IQR) R.E.N.A.L. score was 7 (2.25). Spearman correlation analysis showed that contact surface area was significantly associated with estimated blood loss (p=0.04), operative time (p=0.04) and percent change in estimated glomerular filtration rate (p contact surface area and R.E.N.A.L. score independently affected percent change in estimated glomerular filtration rate (p contact surface area was a better independent predictor of a greater than 10% change in estimated glomerular filtration rate compared to R.E.N.A.L. score (AUC 0.86 vs 0.69). Using this simple mathematical method, contact surface area was associated with surgical outcomes. Compared to R.E.N.A.L. score, contact surface area was a better predictor of functional change after partial nephrectomy. Copyright © 2016 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Outlining precision boundaries among areas with different variability standards using magnetic susceptibility and geomorphic surfaces

OpenAIRE

Matias,Sammy S. R.; Marques Júnior,José; Siqueira,Diego S.; Pereira,Gener T.

2014-01-01

There is an increasing demand for detailed maps that represent in a simplified way the knowledge of the variability of a particular area or region maps. The objective was to outline precision boundaries among areas with different accuracy variability standards using magnetic susceptibility and geomorphic surfaces. The study was conducted in an area of 110 ha, which identified three compartment landscapes based on the geomorphic surfaces model. To determinate pH, organic matter, phosphorus, po...

Saúde Ambiental e Atenção Primária à Saúde nos microterritórios: a taxa de mortalidade infantil para subsidiar a atuação da equipe de saúde

Directory of Open Access Journals (Sweden)

Herling Gregorio Aguilar Alonzo

2013-06-01

Full Text Available Nos últimos 20 anos, o Sistema Único de Saúde no Brasil vem avançando no aprimoramento da atenção primaria e da vigilância em saúde ambiental. No País, também, melhorou a cobertura do saneamento básico. Mas existem iniquidades macrorregionais e são escassas as informações sobre os microterritórios, onde as ações básicas de saúde se concretizam. Descrever a influência das coberturas do sistema de abastecimento de água (SAA, esgotamento sanitário (ES e coleta de resíduos sólidos domiciliares (CRSD na taxa mortalidade infantil (TMI nas áreas de abrangência das unidades básicas de saúde (UBS do Distrito de Saúde Noroeste de Campinas-SP. Foi conduzido estudo ecológico com dados secundários referentes a 2000. As coberturas nas oito UBS: do SAA variou entre 96,3 %, de Valença, e 99,9 % de Integração; de ES entre 67 %, de Ipaussurama e 99,8 % de Integração; da CRSD entre 95,8 % de Florence e 99,9 % de Perseu e Integração. A TMI variou entre 5,5 ‰, na UBS Perseu e 22,9 ‰ Floresta. Observou-se que existe relação inversa, quanto maior a cobertura do SAA (R2=0,73, de ES (R2=0,78 e da CRSD (R2= 0,95 menor a TMI nas UBS. Além de outros fatores, o saneamento básico determina o processo saúde doença da população e conforme os achados, existem iniquidades também nos microterritórios de abrangência das UBS que devem ser consideradas pelos gestores e profissionais de saúde, principalmente, da atenção primária na pactuação das prioridades, ações e metas para atenção integral e vigilância em saúde e atuação intersetorial.

Influence of Ear Surface Area on Heat Tolerance of Composite ...

African Journals Online (AJOL)

Relative importance of ear surface area on heat tolerance of composite rabbit population was evaluated. The study was conducted during the dry and rainy seasons, climatic data were recorded to obtain categorical heat stress index. Physiological parameters, growth performance, ear length and ear width of the rabbits ...

Manipulating surface wettability and oil absorbency of diatomite depending on processing and ambient conditions

Science.gov (United States)

Özen, İlhan; Şimşek, Süleyman; Okyay, Gamze

2015-03-01

In this study, a diatomite sample, which is a natural inorganic mineral with inherently high water and oil absorption capacity, was subjected to grinding before surface modification. Afterwards, the diatomite surface was modified via facile methods using a fluorocarbon (FC) chemical and stearic acid (SA) in addition to the sol-gel fluorosilanization (FS) process. The water and oil wettability, and oil absorbency properties of the unmodified and modified diatomites were investigated in addition to diatomite characterizations such as chemical content, surface area, particle size distribution, morphology, and modification efficiency. It was revealed that the wettability was changed completely depending on the surface modification agent and the media used, while the oil absorbency property surprisingly did not change. On the other hand, the oil absorbency was worsened by the grinding process, whereas the wettability was not affected.

Predicting long-term streamflow variability in moist eucalypt forests using forest growth models and a sapwood area index

Science.gov (United States)

Jaskierniak, D.; Kuczera, G.; Benyon, R.

2016-04-01

A major challenge in surface hydrology involves predicting streamflow in ungauged catchments with heterogeneous vegetation and spatiotemporally varying evapotranspiration (ET) rates. We present a top-down approach for quantifying the influence of broad-scale changes in forest structure on ET and hence streamflow. Across three catchments between 18 and 100 km2 in size and with regenerating Eucalyptus regnans and E. delegatensis forest, we demonstrate how variation in ET can be mapped in space and over time using LiDAR data and commonly available forest inventory data. The model scales plot-level sapwood area (SA) to the catchment-level using basal area (BA) and tree stocking density (N) estimates in forest growth models. The SA estimates over a 69 year regeneration period are used in a relationship between SA and vegetation induced streamflow loss (L) to predict annual streamflow (Q) with annual rainfall (P) estimates. Without calibrating P, BA, N, SA, and L to Q data, we predict annual Q with R2 between 0.68 and 0.75 and Nash Sutcliffe efficiency (NSE) between 0.44 and 0.48. To remove bias, the model was extended to allow for runoff carry-over into the following year as well as minor correction to rainfall bias, which produced R2 values between 0.72 and 0.79, and NSE between 0.70 and 0.79. The model under-predicts streamflow during drought periods as it lacks representation of ecohydrological processes that reduce L with either reduced growth rates or rainfall interception during drought. Refining the relationship between sapwood thickness and forest inventory variables is likely to further improve results.

Is the planum temporale surface area a marker of hemispheric or regional language lateralization?

Science.gov (United States)

Tzourio-Mazoyer, Nathalie; Crivello, Fabrice; Mazoyer, Bernard

2018-04-01

We investigated the association between the left planum temporale (PT) surface area or asymmetry and the hemispheric or regional functional asymmetries during language production and perception tasks in 287 healthy adults (BIL&GIN) who were matched for sex and handedness. The measurements of the PT surface area were performed after manually delineating the region using brain magnetic resonance images (MRI) and considering the Heschl's gyrus (HG) duplication pattern; the measurements either included (PT tot ) or did not include (PT post ) the second gyrus. A region encompassing both the PT and HG (HGPT) was also studied. Regardless of the ROI measured, 80% of the sample had a positive left minus right PT asymmetry. We first tested whether the PT tot , PT post and HGPT surface areas in the left or right hemispheres or PT asymmetries differed in groups of individuals varying in language lateralization by assessing their hemispheric index during a sentence production minus word list production task. We then investigated the association between these different measures of the PT anatomy and the regional asymmetries measured during the task. Regardless of the anatomical definition used, we observed no correlations between the left surface areas or asymmetries and the hemispheric or regional functional asymmetries during the language production task. We then performed a similar analysis using the same sample measuring language functional lateralization during speech listening tasks (i.e., listening to sentences and lists of words). Although the hemispheric lateralization during speech listening was not correlated with the left PT tot , PT post or HGPT surface areas or the PT asymmetries, significant positive correlations were observed between the asymmetries in these regions and the regional functional asymmetries measured in areas adjacent to the end of the Sylvian fissure while participants listened to the word lists or sentences. The PT asymmetry thus appears to be

Caso Ouro Fino Saúde Animal Caso Ouro Fino Saúde Animal Ouro Fino Saúde Animal case

Directory of Open Access Journals (Sweden)

Bernardo Hauch Ribeiro de Castro

2012-04-01

Full Text Available O Caso Ouro Fino Saúde Animal ilustra uma tomada de decisão, pelos executivos da empresa, sobre a entrada em um novo mercado, de vacinas para bovinos. Diante da necessidade de dar um passo maior em direção ao crescimento sustentável, a empresa não poderia deixar de entrar nesse segmento, que representava mais de metade do mercado brasileiro de produtos veterinários. No entanto, era um passo arriscado. A principal questão do caso é avaliar as alternativas de comprar vacinas de terceiros ou produzir internamente suas próprias vacinas. A empresa do caso é a Ouro Fino Saúde Animal, empresa brasileira de produtos veterinários, instalada no Estado de São Paulo, com faturamento de mais de R$ 100 milhões anuais. Os dois principais personagens deste caso são os diretores financeiro e industrial da empresa. A situação passa-se em 2005. Como instrumento de ensino, o caso foi concebido para o ensino de estratégia em cursos de pós-graduação em administração, levando os alunos a avaliar vantagens e desvantagens de cada uma das alternativas. Como objetivo secundário, o caso propicia alguns elementos para uma estimativa da viabilidade financeira da opção de implantar uma nova unidade produtiva e a possibilidade de refletir sobre uma decisão já tomada, de entrada no novo mercado. Por fim, o caso traz uma série de informações sobre o mercado brasileiro e sobre o mercado mundial de produtos veterinários. É possível, com base nestes dados, trabalhar questões ligadas à segmentação e posicionamento da empresa no setor, ficando a critério do professor este tipo de uso.El Caso Ouro Fino Saúde Animal ilustra una toma de decisiones por los ejecutivos de la empresa, a la entrada en un nuevo mercado de las vacunas para el ganado. Ante la necesidad de dar un paso importante hacia el crecimiento sostenible, Ouro Fino Saúde Animal no podía dejar de entrar, ya que representaba más de la mitad del mercado de productos veterinarios

Characterization of the interaction between the cohesin subunits Rad21 and SA1/2.

Directory of Open Access Journals (Sweden)

Nenggang Zhang

Full Text Available The cohesin complex is responsible for the fidelity of chromosomal segregation during mitosis. It consists of four core subunits, namely Rad21/Mcd1/Scc1, Smc1, Smc3, and one of the yeast Scc3 orthologs SA1 or SA2. Sister chromatid cohesion is generated during DNA replication and maintained until the onset of anaphase. Among the many proposed models of the cohesin complex, the 'core' cohesin subunits Smc1, Smc3, and Rad21 are almost universally displayed as tripartite ring. However, other than its supportive role in the cohesin ring, little is known about the fourth core subunit SA1/SA2. To gain deeper insight into the function of SA1/SA2 in the cohesin complex, we have mapped the interactive regions of SA2 and Rad21 in vitro and ex vivo. Whereas SA2 interacts with Rad21 through a broad region (301-750 aa, Rad21 binds to SA proteins through two SA-binding motifs on Rad21, namely N-terminal (NT and middle part (MP SA-binding motif, located at 60-81 aa of the N-terminus and 383-392 aa of the MP of Rad21, respectively. The MP SA-binding motif is a 10 amino acid, α-helical motif. Deletion of these 10 amino acids or mutation of three conserved amino acids (L(385, F(389, and T(390 in this α-helical motif significantly hinders Rad21 from physically interacting with SA1/2. Besides the MP SA-binding motif, the NT SA-binding motif is also important for SA1/2 interaction. Although mutations on both SA-binding motifs disrupt Rad21-SA1/2 interaction, they had no apparent effect on the Smc1-Smc3-Rad21 interaction. However, the Rad21-Rad21 dimerization was reduced by the mutations, indicating potential involvement of the two SA-binding motifs in the formation of the two-ring handcuff for chromosomal cohesion. Furthermore, mutant Rad21 proteins failed to significantly rescue precocious chromosome separation caused by depletion of endogenous Rad21 in mitotic cells, further indicating the physiological significance of the two SA-binding motifs of Rad21.

Verification of surface source's characteristics using large-area 2π gas flow counter

International Nuclear Information System (INIS)

Abu Naser Waheed, M.M.; Mikami, S.; Kobayashi, H.; Noda, K.

1998-09-01

Power Reactor and Nuclear Fuel Development Corporation (PNC) has large-area 2π gas flow counter for the purpose of measuring activity of surface sources of alpha or beta ray emitter. Surface sources are used for the calibration of radiation measuring equipment for radiation control. Due to sequent use of sources, the surface of these sources are inclined to go in bad condition because of unwanted accidental incidents. For the better calibration achievement of radiation measuring instruments the rate of emission of these sources are to be checked periodically by the large-area 2π gas flow counter. In this paper described that eight U 3 O 8 surface sources were selected from many sources of PNC Tokai Works and activity of these sources was measured by the 2π gas flow counter. The results were compared with the values certified by Japan Radio Isotope Association (JRIA). It is evident from the result of comparison that the surface sources are in good condition, i.e., the sources are reliable to calibrate the radiation control instruments. (author)

External Validation of Contact Surface Area as a Predictor of Postoperative Renal Function in Patients Undergoing Partial Nephrectomy.

Science.gov (United States)

Haifler, Miki; Ristau, Benjamin T; Higgins, Andrew M; Smaldone, Marc C; Kutikov, Alexander; Zisman, Amnon; Uzzo, Robert G

2017-09-20

We sought to externally validate a mathematical formula for tumor contact surface area as a predictor of postoperative renal function in patients undergoing partial nephrectomy for renal cell carcinoma. We queried a prospectively maintained kidney cancer database for patients who underwent partial nephrectomy between 2014 and 2016. Contact surface area was calculated using data obtained from preoperative cross-sectional imaging. The correlation between contact surface area and perioperative variables was examined. The correlation between postoperative renal functional outcomes, contact surface area and the R.E.N.A.L. (radius, exophytic/endophytic properties, nearness of tumor to collecting system or sinus, anterior/posterior, location relative to polar lines and tumor touches main renal artery or vein) nephrometry score was also assessed. A total of 257 patients who underwent partial nephrectomy had sufficient data to enter the study. Median contact surface area was 14.5 cm 2 (IQR 6.2-36) and the median nephrometry score was 9 (IQR 7-10). Spearman correlation analysis showed that contact surface area correlated with estimated blood loss (r s = 0.42, p contact surface area and nephrometry score were independent predictors of the absolute change in the estimated glomerular filtration rate (each p contact surface area was a better predictor of a greater than 20% postoperative decline in the estimated glomerular filtration rate compared with the nephrometry score (AUC 0.94 vs 0.80). Contact surface area correlated with the change in postoperative renal function after partial nephrectomy. It can be used in conjunction with the nephrometry score to counsel patients about the risk of renal functional decline after partial nephrectomy. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Area densitometry using rotating Scheimpflug photography for posterior capsule opacification and surface light scattering analyses.

Science.gov (United States)

Minami, Keiichiro; Honbo, Masato; Mori, Yosai; Kataoka, Yasushi; Miyata, Kazunori

2015-11-01

To compare area densitometry analysis using rotating Scheimpflug photography in quantifications of posterior capsule opacification (PCO) and surface light scattering with previous anterior-segment analyzer measurement. Miyata Eye Hospital, Miyazaki, Japan. Prospective observational case series. Scheimpflug images of eyes with foldable intraocular lenses (IOLs) were obtained using rotating and fixed Scheimpflug photography. Area densitometry on the posterior and anterior surfaces was conducted for PCO and surface light scattering analyses, respectively, with an identical area size. Correlation between two measurements was analyzed using linear regression. The study included 105 eyes of 74 patients who received IOLs 1 to 18 years (mean, 4.9 ± 4.5 years) postoperatively. In the PCO analysis on the posterior IOL surface, there was a significant correlation between the two measurements (P photography exhibited saturation due to intensive scatterings. Area densitometry combined with a rotating Scheimpflug photography was exchangeable to previously established densitometry measurement, and allowed successive evaluation in longer-term observations. Copyright © 2015 ASCRS and ESCRS. Published by Elsevier Inc. All rights reserved.

Suporte social, promoção de saúde e saúde bucal na população idosa no Brasil

Directory of Open Access Journals (Sweden)

Silvânia Suely Caribé de Araújo

2006-06-01

Full Text Available O crescente envelhecimento da população mundial, inclusive no Brasil, ressalta a importância de medidas para se lidar com esta situação. No Brasil, a maioria dos idosos é do sexo feminino; vive em domicílios multigeracionais; é referência econômica nos mesmos; possui baixo nível socioeconômico; portadora de, pelo menos, uma doença crônica; independente para realização das atividades da vida diária; não possui dentes, e busca atenção em saúde no SUS. Os idosos brasileiros expostos a situações de vulnerabilidade social estão sujeitos à interferência direta dos determinantes sociais no processo saúde-doença. O Suporte Social inclui políticas e redes de apoio social, que atuam como agente de integração do idoso na sociedade, minimizando os riscos de exclusão social e, conseqüentemente, de danos à sua saúde por meio de medidas de Promoção de Saúde. Este artigo aborda o Suporte Social e alguns de seus aspectos, tais como: tipo e local de residência, transporte e suporte financeiro; em idosos brasileiros e sua relação com a Promoção de Saúde.

Stereological estimation of surface area and barrier thickness of fish gills in vertical sections.

Science.gov (United States)

Da Costa, Oscar T F; Pedretti, Ana Carolina E; Schmitz, Anke; Perry, Steven F; Fernandes, Marisa N

2007-01-01

Previous morphometric methods for estimation of the volume of components, surface area and thickness of the diffusion barrier in fish gills have taken advantage of the highly ordered structure of these organs for sampling and surface area estimations, whereas the thickness of the diffusion barrier has been measured orthogonally on perpendicularly sectioned material at subjectively selected sites. Although intuitively logical, these procedures do not have a demonstrated mathematical basis, do not involve random sampling and measurement techniques, and are not applicable to the gills of all fish. The present stereological methods apply the principles of surface area estimation in vertical uniform random sections to the gills of the Brazilian teleost Arapaima gigas. The tissue was taken from the entire gill apparatus of the right-hand or left-hand side (selected at random) of the fish by systematic random sampling and embedded in glycol methacrylate for light microscopy. Arches from the other side were embedded in Epoxy resin. Reference volume was estimated by the Cavalieri method in the same vertical sections that were used for surface density and volume density measurements. The harmonic mean barrier thickness of the water-blood diffusion barrier was calculated from measurements taken along randomly selected orientation lines that were sine-weighted relative to the vertical axis. The values thus obtained for the anatomical diffusion factor (surface area divided by barrier thickness) compare favourably with those obtained for other sluggish fish using existing methods.

O desafio da análise de redes de saúde no campo da saúde coletiva

Directory of Open Access Journals (Sweden)

Carlos Eduardo Menezes Amaral

Full Text Available Resumo A organização do cuidado no Sistema Único de Saúde tem conferido destaque às redes de atenção, tanto no campo discursivo como na sua tradução em estratégias concretas. Contudo, são escassos os aportes analíticos e avaliativos abarcando as redes enquanto objeto. Neste artigo, apresentamos alguns subsídios sob forma de um construto multidimensional que dialoga com as contribuições de autores do campo da saúde coletiva e de outros campos disciplinares que se debruçaram sobre o tema. Nossa proposta apresenta cinco dimensões, sistematizadas depois de um exercício conduzido pelo método analítico reflexivo, tomando como material 23 artigos concernentes a distintos aspectos relevantes à análise de redes de saúde. Esse exercício, operacionalizando um processo sucessivo de redução semântica, resultou em um modelo composto pelas seguintes dimensões: Unidades mínimas, compreendendo a caracterização dos pontos fixos a partir dos quais ocorrem as conexões da rede; Conectividade, representando as modalidades e efeitos das relações estabelecidas entre as unidades mínimas; Integração, concernente aos efeitos do conjunto das unidades mínimas e suas relações, identificados como coerência, continuidade e complementaridade de ações na rede; Normatividade, indicando a construção e adesão a diretrizes clínicas e linhas de cuidado singulares, assim como o estabelecimento de critérios de encaminhamento, entrada e saída de cada ponto da rede; e Subjetividade, incluindo protagonismos, sentidos, valores e vínculos afetivos circulantes na rede. Essas dimensões, operando de forma recursiva, podem subsidiar a construção de modelos analítico-conceituais de redes como aporte à superação desse desafio no campo da saúde coletiva.

O movimento da Saúde Bucal Coletiva no Brasil

Directory of Open Access Journals (Sweden)

Catharina Leite Matos Soares

Full Text Available Resumo A Saúde Bucal Coletiva (SBC pode designar um fenômeno histórico especifico, distinto das outras “Odontologias Alternativas” e um referencial teórico para as práticas odontológicas em serviços de saúde. Este estudo buscou compreender a permanência das “Odontologias Alternativas” no espaço social de luta pela saúde bucal no Brasil, a partir de posições dos agentes fundadores e precursores, levando em consideração as concepções de SBC, Saúde Coletiva (SC e SUS. Partiu-se da teoria das práticas de Pierre Bourdieu, complementada pelos conceitos de hegemonia e contra-hegemonia em Gramsci. Realizaram-se 12 entrevistas em profundidade, revisão documental e análise da produção científica, além das trajetórias dos agentes e seus capitais em 1980 e 2013. Os resultados indicam que a concepção de SBC e SC como ruptura com as práticas de saúde oriundas às “Odontologias Alternativas” prevaleceu entre aqueles com disposições políticas em defesa da democracia e da Reforma Sanitária. Embora a SBC tenha proposta crítica, permanecem antigas “Odontologias” na produção científica e nas práticas de saúde bucal.

Molecularly-Limited Fractal Surface Area of Mineral Powders

Directory of Open Access Journals (Sweden)

Petr Jandacka

2016-05-01

Full Text Available The topic of the specific surface area (SSA of powders is not sufficiently described in the literature in spite of its nontrivial contribution to adsorption and dissolution processes. Fractal geometry provides a way to determine this parameter via relation SSA ~ x(D − 3s(2 − D, where x (m is the particle size and s (m is a scale. Such a relation respects nano-, micro-, or macro-topography on the surface. Within this theory, the fractal dimension 2 ≤ D < 3 and scale parameter s plays a significant role. The parameter D may be determined from BET or dissolution measurements on several samples, changing the powder particle sizes or sizes of adsorbate molecules. If the fractality of the surface is high, the SSA does not depend on the particle size distribution and vice versa. In this paper, the SSA parameter is analyzed from the point of view of adsorption and dissolution processes. In the case of adsorption, a new equation for the SSA, depending on the term (2 − D∙(s2 − sBET/sBET, is derived, where sBET and s2 are effective cross-sectional diameters for BET and new adsorbates. Determination of the SSA for the dissolution process appears to be very complicated, since the fractality of the surface may change in the process. Nevertheless, the presented equations have good application potential.

Para uma análise existencial da saúde

Directory of Open Access Journals (Sweden)

Roberto Passos Nogueira

2006-12-01

Full Text Available A ontologia fundamental de Heidegger de Ser e Tempo tem servido de fonte de inspiração para investigadores que realizam seus trabalhos nas áreas de saúde mental e saúde coletiva, a despeito das dificuldades de interpretação dessa obra. O entendimento equivocado por Binswanger, na tentativa de transpô-la para a psicanálise, serve de exemplo e é brevemente exposto com base na análise detalhada feita por Loparic. Neste artigo, parte-se do pressuposto de que a linguagem antimetafísica de Heidegger pode ajudar a fechar o que denomina de fenda ontológica entre saúde mental e saúde do corpo. Na primeira parte, recapitulam-se alguns equívocos que podem ser cometidos na interpretação da ontologia heideggeriana e delineiam-se os critérios de não-objetivação e não-determinismo. Na segunda, o autor aporta sua contribuição pessoal, ao explicitar sua própria interpretação da analítica existencial da saúde, articulada em torno de termos, tais como: padecimento, socorro e reatamento.

Studies of drag on the nanocomposite superhydrophobic surfaces

Energy Technology Data Exchange (ETDEWEB)

Brassard, Jean-Denis [Anti-icing Materials International Laboratory (AMIL), Université du Québec à Chicoutimi, 555 Boulevard de l‘Université, Chicoutimi, Québec, Canada G7H 2B1 (Canada); Centre Universitaire de Recherche sur l’Aluminium (CURAL), Université du Québec à Chicoutimi, 555 Boulevard de l‘Université, Chicoutimi, Québec, Canada G7H 2B1 (Canada); Sarkar, D.K., E-mail: dsarkar@uqac.ca [Centre Universitaire de Recherche sur l’Aluminium (CURAL), Université du Québec à Chicoutimi, 555 Boulevard de l‘Université, Chicoutimi, Québec, Canada G7H 2B1 (Canada); Perron, Jean [Anti-icing Materials International Laboratory (AMIL), Université du Québec à Chicoutimi, 555 Boulevard de l‘Université, Chicoutimi, Québec, Canada G7H 2B1 (Canada)

2015-01-01

Graphical abstract: - Highlights: • The nanocomposite thin films of stearic acid (SA)-functionalized ZnO nanoparticles incorporated in epoxy polymer matrix have been achieved. • SA-functionalization of ZnO nanoparticles in the thin films was confirmed by XRD and FTIR. • The measured rms roughness of the thin film is found to be 12 ± 1 μm with the adhesion of 5B on glass. • The wetting property shows that the surface of the film is superhydrophobic with the CA of 156 ± 4° and CAH of 4 ± 2°. • The drag reduction on the surface of superhydrophobic glass sphere is 16% lower than as-received glass sphere. - Abstract: The nanocomposite thin films of stearic acid (SA)-functionalized ZnO nanoparticles incorporated in epoxy polymer matrix have been achieved. The X-ray diffraction (XRD) studies show the formation of zinc stearate on ZnO nanoparticles as the confirmation of SA-functionalization of ZnO nanoparticles in the thin films. Morphological analyses reveal the presence of micro-holes with the presence of irregular nanoparticles. The measured root mean square (rms) roughness of the thin film is found to be 12 ± 1 μm with the adhesion of 5B on both glass and aluminum substrates. The wetting property shows that the surface of the film is superhydrophobic with the contact angle of water of 156 ± 4° having contact angle hysteresis (CAH) of 4 ± 2°. The average terminal velocity in the water of the as-received glass spheres and superhydrophobic spheres were found to be 0.66 ± 0.01 m/s and 0.72 ± 0.01 m/s respectively. Consequently, the calculated average coefficients of the surface drag of the as-received glass sphere and superhydrophobic glass sphere were 2.30 ± 0.01 and 1.93 ± 0.03, respectively. Hence, the drag reduction on the surface of superhydrophobic glass sphere is found to be approximately 16% lower than as-received glass sphere.

Studies of drag on the nanocomposite superhydrophobic surfaces

International Nuclear Information System (INIS)

Brassard, Jean-Denis; Sarkar, D.K.; Perron, Jean

2015-01-01

Graphical abstract: - Highlights: • The nanocomposite thin films of stearic acid (SA)-functionalized ZnO nanoparticles incorporated in epoxy polymer matrix have been achieved. • SA-functionalization of ZnO nanoparticles in the thin films was confirmed by XRD and FTIR. • The measured rms roughness of the thin film is found to be 12 ± 1 μm with the adhesion of 5B on glass. • The wetting property shows that the surface of the film is superhydrophobic with the CA of 156 ± 4° and CAH of 4 ± 2°. • The drag reduction on the surface of superhydrophobic glass sphere is 16% lower than as-received glass sphere. - Abstract: The nanocomposite thin films of stearic acid (SA)-functionalized ZnO nanoparticles incorporated in epoxy polymer matrix have been achieved. The X-ray diffraction (XRD) studies show the formation of zinc stearate on ZnO nanoparticles as the confirmation of SA-functionalization of ZnO nanoparticles in the thin films. Morphological analyses reveal the presence of micro-holes with the presence of irregular nanoparticles. The measured root mean square (rms) roughness of the thin film is found to be 12 ± 1 μm with the adhesion of 5B on both glass and aluminum substrates. The wetting property shows that the surface of the film is superhydrophobic with the contact angle of water of 156 ± 4° having contact angle hysteresis (CAH) of 4 ± 2°. The average terminal velocity in the water of the as-received glass spheres and superhydrophobic spheres were found to be 0.66 ± 0.01 m/s and 0.72 ± 0.01 m/s respectively. Consequently, the calculated average coefficients of the surface drag of the as-received glass sphere and superhydrophobic glass sphere were 2.30 ± 0.01 and 1.93 ± 0.03, respectively. Hence, the drag reduction on the surface of superhydrophobic glass sphere is found to be approximately 16% lower than as-received glass sphere

Saúde mental versus doença mental

OpenAIRE

Sá, Luís

2010-01-01

Neste artigo são sintetizadas um conjunto de leituras realizadas para a moderação da mesa “Saúde Mental versus Doença Mental”. Pretendemos contribuir para a reflexão sobre a dificuldade de consensos para a definição objectiva de saúde e doença mental.

Effects of the nanotopographic surface structure of commercially pure titanium following anodization–hydrothermal treatment on gene expression and adhesion in gingival epithelial cells

International Nuclear Information System (INIS)

Takebe, J.; Miyata, K.; Miura, S.; Ito, S.

2014-01-01

The long-term stability and maintenance of endosseous implants with anodized–hydrothermally treated commercially pure titanium surfaces and a nanotopographic structure (SA-treated c.p.Ti) depend on the barrier function provided by the interface between the transmucosal portion of the implant surface and the peri-implant epithelium. This study investigated the effects of extracellular and intracellular gene expression in adherent gingival epithelial cells cultured for 1–7 days on SA-treated c.p.Ti implant surfaces compared to anodic oxide (AO) c.p.Ti and c.p.Ti disks. Scanning electron microscopy (SEM) showed filopodium-like extensions bound closely to the nanotopographic structure of SA-treated c.p.Ti at day 7 of culture. Gene expressions of focal adhesion kinase, integrin-α6β4, and laminin-5 (α3, β3, γ2) were significantly higher on SA-treated c.p.Ti than on c.p.Ti or AO c.p.Ti after 7 days (P < 0.05). Our results confirmed that gingival epithelial cells adhere to SA-treated c.p.Ti as the transmucosal portion of an implant, and that this interaction markedly improves expression of focal adhesion molecules and enhances the epithelial cell phenotype. The cellular gene expression responses driving extracellular and intracellular molecular interactions thus play an important role in maintenance at the interface between SA-treated c.p.Ti implant surfaces and the gingival epithelial cells. - Highlights: • SA-treated Ti provides a nanotopographic structure for clinical oral implants. • This could regulate integrin-mediated epithelial cell adhesion and gene expression. • FAK mRNA was significantly higher on SA-treated Ti. • Integrin-α6β4 and laminin-5 mRNA were significantly higher on SA-treated Ti. • Extracellular/intracellular molecular interactions play a key role on SA-treated Ti

Saúde sexual dos adolescentes : conhecimentos riscos e mitos

OpenAIRE

Antunes, Maria Inês Araújo

2012-01-01

Trabalho final de mestrado integrado na área científica de Medicina Geral e Familiar, apresentado á Faculdade de Medicina da Universidade de Coimbra Introdução: A saúde sexual é parte importante da saúde e desenvolvimento dos jovens, sendo os comportamentos sexuais e seus riscos um importante aspeto de saúde pública. O presente artigo visa avaliar as fontes de informação e mitos sobre sexualidade e o risco de infeção por ISTs e gravidez não planeada nos adolescentes. Materiais ...

Accessible surface area from NMR chemical shifts

Energy Technology Data Exchange (ETDEWEB)

Hafsa, Noor E.; Arndt, David; Wishart, David S., E-mail: david.wishart@ualberta.ca [University of Alberta, Department of Computing Science (Canada)

2015-07-15

Accessible surface area (ASA) is the surface area of an atom, amino acid or biomolecule that is exposed to solvent. The calculation of a molecule’s ASA requires three-dimensional coordinate data and the use of a “rolling ball” algorithm to both define and calculate the ASA. For polymers such as proteins, the ASA for individual amino acids is closely related to the hydrophobicity of the amino acid as well as its local secondary and tertiary structure. For proteins, ASA is a structural descriptor that can often be as informative as secondary structure. Consequently there has been considerable effort over the past two decades to try to predict ASA from protein sequence data and to use ASA information (derived from chemical modification studies) as a structure constraint. Recently it has become evident that protein chemical shifts are also sensitive to ASA. Given the potential utility of ASA estimates as structural constraints for NMR we decided to explore this relationship further. Using machine learning techniques (specifically a boosted tree regression model) we developed an algorithm called “ShiftASA” that combines chemical-shift and sequence derived features to accurately estimate per-residue fractional ASA values of water-soluble proteins. This method showed a correlation coefficient between predicted and experimental values of 0.79 when evaluated on a set of 65 independent test proteins, which was an 8.2 % improvement over the next best performing (sequence-only) method. On a separate test set of 92 proteins, ShiftASA reported a mean correlation coefficient of 0.82, which was 12.3 % better than the next best performing method. ShiftASA is available as a web server ( http://shiftasa.wishartlab.com http://shiftasa.wishartlab.com ) for submitting input queries for fractional ASA calculation.

[Observation of topography and analysis of surface contamination of titanium implant after roughness treatment].

Science.gov (United States)

Cao, Hongdan; Yang, Xiaodong; Wu, Dayi; Zhang, Xingdong

2007-04-01

The roughness treatment of dental implant surface could improve the bone bonding and increase the success rate of implant, but the difference of diverse treatments is still unknown. In this study using scanning electron microscopy (SEM), energy disperse spectrometer (EDS) and the test of contact angle, we studied the microstructure, surface contamination and surface energy, and hence conducted a comparative analysis of the following surface roughness treatments: Polished Treatment (PT), Sandblasting with Alumina(SA), Sandblasting with Aluminia and Acid-etched (SAA), Sandblasting with Titanium Acid-etched (STA), Electro-erosion Treatment(ET). The result of SEM showed that the surface displayed irregularities after roughness treatments and that the surface properties of different roughness treatments had some distinctions. SAA and SA had some sharp edges and protrutions; the STA showed a regular pattern like honeycomb, but the ET sample treated by electric erosion exhibited the deeper pores of different sizes and the pores with a perforated secondary structure. The EDS indicated that the surface was contaminated after the treatment with foreign materials; the SA surface had some embedded contaminations even after acid etching. The measurement of water contact angle indicated that the morphology correlated with the surface treatments. These findings suggest that the distinction of surface structure and composition caused by different treatments may result in the disparity in biological behavior of dental implant.

Performance verification of focus variation and confocal microscopes measuring tilted ultra-fine surfaces

DEFF Research Database (Denmark)

Quagliotti, Danilo; Baruffi, Federico; Tosello, Guido

2016-01-01

The behaviour of two optical instruments, scilicet a laser scanning confocal microscope and a focus-variation microscope, was investigated considering measurements of tilted surfaces. The measured samples were twelve steel artefacts for mould surface finish reference, covering Sa roughness...... parameter in the range (101—103) nm. The 3D surface texture parameters considered were Sa, Sq and Sdq. The small working distance of the confocal microscope objectives influenced the measurement setup, preventing from selecting a high tilting angle. The investigation was carried out comparing measurements...... of flat surfaces (0° tilt) with measurements of 12.5° tilted surfaces. The confocal microscope results showed a high sensitivity to tilting due to the laser beam reflection on the metal surfaces. The focus variation microscope results were more robust with respect to the considered angular variation...

Dinâmica do capital e sistemas locais de saúde: em busca de uma análise integradora do setor saúde

Directory of Open Access Journals (Sweden)

Maria de Fátima Siliansky de Andreazzi

2006-06-01

Full Text Available Apresenta-se uma proposta metodológica direcionada à análise dos determinantes da oferta de atenção à saúde, com base na dinâmica da acumulação de capital a ser agregada aos elementos de definição das políticas de saúde mais convencionalmente empregados na área da Saúde Coletiva. A análise está baseada nos conceitos e métodos da Economia Industrial, já testados para o setor saúde em trabalhos desenvolvidos no âmbito europeu e por pesquisadores da CEPAL, aos quais se propõem agregar variáveis do contexto geral, que condicionam possibilidades e impõem limites às estratégias dos agentes locais, e análises de corte histórico que permitam identificar rugosidades. Destina-se a apoiar os gestores do SUS, estaduais e municipais, na sua atribuição de comando único do setor saúde sobre um determinado território, o que inclui o conjunto das possibilidades de regulação do setor privado - do planejamento da oferta ao controle de qualidade.

Indexing Glomerular Filtration Rate to Body Surface Area

DEFF Research Database (Denmark)

Redal-Baigorri, Belén; Rasmussen, Knud; Heaf, James Goya

2014-01-01

BACKGROUND: Kidney function is mostly expressed in terms of glomerular filtration rate (GFR). A common feature is the expression as ml/min per 1.73 m(2) , which represents the adjustment of the individual kidney function to a standard body surface area (BSA) to allow comparison between individuals....... We investigated the impact of indexing GFR to BSA in cancer patients, as this BSA indexation might affect the reported individual kidney function. METHODS: Cross-sectional study of 895 adults who had their kidney function measured with (51) chrome ethylene diamine tetraacetic acid. Mean values of BSA...

Asymptotic variance of grey-scale surface area estimators

DEFF Research Database (Denmark)

Svane, Anne Marie

Grey-scale local algorithms have been suggested as a fast way of estimating surface area from grey-scale digital images. Their asymptotic mean has already been described. In this paper, the asymptotic behaviour of the variance is studied in isotropic and sufficiently smooth settings, resulting...... in a general asymptotic bound. For compact convex sets with nowhere vanishing Gaussian curvature, the asymptotics can be described more explicitly. As in the case of volume estimators, the variance is decomposed into a lattice sum and an oscillating term of at most the same magnitude....

A Motivação dos Profissionais de Saúde das Unidades Básicas de Saúde

Directory of Open Access Journals (Sweden)

Antônio Alves Filho

Full Text Available Relata-se pesquisa que objetivou estudar a motivação para o trabalho dos profissionais de saúde vinculados às Unidades Básicas de Saúde do município de Natal. Compreendeu-se a motivação como um processo e aplicou-se a Teoria das Expectativas que a considera como um fenômeno processual e envolve cinco componentes: resultados do trabalho, expectativa, valên-cia, instrumentalidade e força motivacional. Entendeu-se também a motivação como um fenômeno relacionado com o contexto de trabalho e adotou-se a perspectiva psicossociológica. Aplicou-se o Inventário da Motivação e Significado do Trabalho, identificando-se os fatores que mais contribuem, bem como os que enfraquecem a força motivacional dos profissionais de saúde. Conclui-se que a maioria dos profissionais apresentou força motivacional moderada e em queda, por vivenciarem e perceberem um contexto deteriorado com condições de trabalho desfavoráveis.

O apoio matricial em saúde mental na Estratégia da Saúde da Família : concepção da equipe de apoiadores

OpenAIRE

Beatriz Antunes

2015-01-01

A Reforma Psiquiátrica apontou novos instrumentos de atenção à saúde mental; dentre eles, o apoio matricial, o qual oferece retaguarda especializada à Estratégia da Saúde da Família, consolidando o cuidado em saúde mental no território. A pesquisa tem como objetivo conhecer a concepção dos apoiadores de matriciamento quanto ao apoio matricial oferecido às equipes de Estratégia da Saúde da Família. Estudo qualitativo descritivo, exploratório, tipo estudo de caso. Foram informantes seis profiss...

O sistema social da saúde: conceito, limites e possibilidades

Directory of Open Access Journals (Sweden)

Sandra Regina Martini Vial

2014-06-01

Full Text Available Discutem-se as possibilidades de definir o sistema da saúde como um sistema social, diferenciado funcionalmente, a partir da ótica da Teoria dos Sistemas Sociais, utilizando os pressupostos gerais da Teoria e a estrutura apresentada por Niklas Luhmann sobre o sistema médico. Apresentam-se alguns “desassossegos” provocados pela Teoria; as possíveis relações entre o sistema da saúde e o que Luhmann chamou de sistema médico e como esse sistema, atualmente, pode ser considerado sistema da saúde; e, por fim, a nossa concepção do sistema da saúde na atualidade.

Correlation of lung surface area to apoptosis and proliferation in human emphysema.

Science.gov (United States)

Imai, K; Mercer, B A; Schulman, L L; Sonett, J R; D'Armiento, J M

2005-02-01

Pulmonary emphysema is associated with alterations in matrix proteins and protease activity. These alterations may be linked to programmed cell death by apoptosis, potentially influencing lung architecture and lung function. To evaluate apoptosis in emphysema, lung tissue was analysed from 10 emphysema patients and six individuals without emphysema (normal). Morphological analysis revealed alveolar cells in emphysematous lungs with convoluted nuclei characteristic of apoptosis. DNA fragmentation was detected using terminal deoxynucleotide transferase-mediated dUTP nick-end labelling (TUNEL) and gel electrophoresis. TUNEL revealed higher apoptosis in emphysematous than normal lungs. Markers of apoptosis, including active caspase-3, proteolytic fragment of poly (ADP-ribose) polymerase, Bax and Bad, were detected in emphysematous lungs. Linear regression showed that apoptosis was inversely correlated with surface area. Emphysematous lungs demonstrated lower surface areas and increased cell proliferation. There was no correlation between apoptosis and proliferation, suggesting that, although both events increase during emphysema, they are not in equilibrium, potentially contributing to reduced lung surface area. In summary, cell-based mechanisms associated with emphysematous parenchymal damage include increased apoptosis and cell proliferation. Apoptosis correlated with airspace enlargement, supporting epidemiological evidence of the progressive nature of emphysema. These data extend the understanding of cell dynamics and structural changes within the lung during emphysema pathogenesis.

Surface runoff from urban areas. New aspects; Neue Aspekte in der Behandlung von Siedlungsabfluessen

Energy Technology Data Exchange (ETDEWEB)

Fuchs, Stephan [Karlsruher Institut fuer Technologie (KIT), Karlsruhe (Germany). Bereich Siedlungswasserwirtschaft und Wasserguetewirtschaft; Lambert, Benedikt [Bioplan Landeskulturgesellschaft, Sinsheim (Germany); Grotehusmann, Dieter [Ingenieurgesellschaft fuer Stadthydrologie, Hannover (Germany)

2010-12-15

The surface runoff from urban areas is one of the most important sources of pollutants emitted into surface waters. Suspended solids which act as a transport vehicle for many anthropogenic pollutants (e. g. heavy metals, PAH) are a key factor in this regard. The development of efficient measures of storm water runoff treatment thus requires a further differentiation of suspended solids in a fine (clay and silt) and coarse (sand and gravel) fraction. Both fractions show distinctly different characteristics in pollutant loading, transport and retention on urban surfaces and sewer systems. The primary aim of storm water runoff treatment is the reduction of the fine particles which are always highly loaded with anthropogenic pollutants. In contrast the coarse particles are almost unpolluted especially if they have a low organic share. The widespread sedimentation tanks with surface loadings between 10 and 2 m/h are very inefficient. A significant, save and lasting reduction of the emitted load of fine particles requires a considerable reduction of the surface loads. That can be achieved with the installation of lamellar settler or the utilization of the very large volumes of flood management tanks frequently present in urban areas. Filtration plants are highly efficient but there application in urban areas is limited due to their high space demands. (orig.)

Assembly work and transport of JT-60SA cryostat base

International Nuclear Information System (INIS)

Okano, Fuminori; Masaki, Kei; Yagyu, Jun-ichi; Shibama, Yusuke; Sakasai, Akira; Miyo, Yasuhiko; Kaminaga, Atsushi; Nishiyama, Tomokazu; Suzuki, Sadaaki; Nakamura, Shigetoshi; Shibanuma, Kiyoshi

2013-11-01

Japan Atomic Energy Agency started to construct a fully superconducting tokamak experiment device, JT-60SA, to support the ITER since January, 2013 at the Fusion Research and Development Directorate in Naka, Japan. The JT-60SA will be constructed with enhancing the previous JT-60 infrastructures, in the JT-60 torus hall, where the ex-JT-60 machine was disassembled. The JT-60SA Cryostat Base, for base of the entire tokamak structure, were assembly as the first step of this construction. The Cryostat Base (CB, 250tons) is consists of 7 main components made of stainless steel, in 12 m diameter and 3 m height. The CB was built in the Spain and transported to the Naka site, via Hitachi port. After pre-assembly work including preliminary measurements and sole plate adjustments of its height/flatness, the JT-60SA CB was carefully set on the sole plate. JT-60SA CB was assembled with high accuracy by using a laser tracker. The CB was adjusted in the height and flatness against the assembly reference position and determined by the absolute coordinates. This report introduces the concrete result of assembly work and transport of JT-60SA CB. (author)

Effects of titanium surface topography on bone integration: a systematic review.

Science.gov (United States)

Wennerberg, Ann; Albrektsson, Tomas

2009-09-01

To analyse possible effects of titanium surface topography on bone integration. Our analyses were centred on a PubMed search that identified 1184 publications of assumed relevance; of those, 1064 had to be disregarded because they did not accurately present in vivo data on bone response to surface topography. The remaining 120 papers were read and analysed, after removal of an additional 20 papers that mainly dealt with CaP-coated and Zr implants; 100 papers remained and formed the basis for this paper. The bone response to differently configurated surfaces was mainly evaluated by histomorphometry (bone-to-implant contact), removal torque and pushout/pullout tests. A huge number of the experimental investigations have demonstrated that the bone response was influenced by the implant surface topography; smooth (S(a)1-2 microm) surfaces showed stronger bone responses than rough (S(a)>2 microm) in some studies. One limitation was that it was difficult to compare many studies because of the varying quality of surface evaluations; a surface termed 'rough' in one study was not uncommonly referred to as 'smooth' in another; many investigators falsely assumed that surface preparation per se identified the roughness of the implant; and many other studies used only qualitative techniques such as SEM. Furthermore, filtering techniques differed or only height parameters (S(a), R(a)) were reported. * Surface topography influences bone response at the micrometre level. * Some indications exist that surface topography influences bone response at the nanometre level. * The majority of published papers present an inadequate surface characterization. * Measurement and evaluation techniques need to be standardized. * Not only height descriptive parameters but also spatial and hybrid ones should be used.

Surface area-burnoff correlation for the steam--graphite reaction

International Nuclear Information System (INIS)

Stark, W.A. Jr.; Malinauskas, A.P.

1977-01-01

The oxidation of core graphite by steam of air represents a problem area of significant concern in safety analyses for the high temperature gas cooled reactor (HTGR). Core and core-support graphite integrity and strength deteriorate with oxidation of the graphite, and oxidation furthermore could affect the rate of fission product release under upset conditions. Consequently, modeling of core response during steam or air ingress conditions requires an expression for the rate of graphite interaction with those impurities. The steam--graphite reaction in particular is a complex interaction of mass transport within the graphite with chemi-sorption and reaction on accessible surfaces; experimental results from graphite to graphite are highly variable, and the description of the reaction is not yet completely consistent. A simple etch pit model relating surface area to burnoff has been proposed and shown to provide reasonable correlation with experimental data obtained from steam oxidation studies of nuclear grade H-327 graphite. Unaccounted differences between theory and experiment arise at burnoffs exceeding 3 to 5 percent. The model, while not complete nor comprehensive, is consistent with experimental observations of graphite oxidation by O 2 (air), CO 2 , or H 2 O, and could have some utility in safety analysis

Kinetika i optimizacija procesa izolacije biljnih ekstrakata sa antibakterijskim dejstvom

OpenAIRE

Ivanović, Jasna Z.

2011-01-01

Cilj ove doktorske disertacije bio je ispitivanje kinetike izolacije ekstrakata sa jakim antibakterijskim delovanjem iz biljnog materijala primenom različitih postupaka ekstrakcije. Za izolaciju bioaktivnih supstanci korišćena je natkritična ekstrakcija sa ugljenik(IV)-oksidom, hidrodestilacija i ekstrakcija etanolom sa i bez primene ultrazvuka. Predmetom istraživanja ove doktorske disertacije obuhvaćena je analiza i optimizacija različitih procesa izolacije, kao i ispitivanje sad...

Solvent accessible surface area (ASA) of simulated phospholipid membranes

DEFF Research Database (Denmark)

Tuchsen, E.; Jensen, Morten Østergaard; Westh, P.

2003-01-01

The membrane-solvent interface has been investigated through calculations of the solvent accessible surface area (ASA) for simulated membranes of DPPC and POPE. For DPPC at 52 degreesC we found an ASA of 126 +/- 8 Angstrom(2) per lipid molecule, equivalent to twice the projected lateral area......, even the most exposed parts of the PC head-group show average ASAs of less than half of its maximal or 'fully hydrated' value. The average ASA of a simulated POPE membrane was 96 +/- 7 Angstrom(2) per lipid. The smaller value than for DPPC reflects much lower ASA of the ammonium ion, which is partially...... compensated by increased exposure of the ethylene and phosphate moieties. The ASA of the polar moieties Of (PO4, NH3 and COO) constitutes 65% of the total accessible area for POPE, making this interface more polar than that of DPPC. It is suggested that ASA information can be valuable in attempts...

Percepções sobre necessidades de saúde na Atenção Básica segundo usuários de um serviço de saúde

Directory of Open Access Journals (Sweden)

Paulo Alexandre de Moraes

2011-03-01

Full Text Available Trata-se de pesquisa qualitativa de caráter exploratório, com o objetivo de conhecer o conceito de necessidades de saúde, segundo a percepção de usuários de um serviço de saúde do interior paulista. Realizou-se 15 entrevistas, por meio de roteiro semi-estruturado, em janeiro de 2009. A leitura exaustiva das entrevistas permitiu a apreensão de elementos constitutivos das categorias, definidas a priori, segundo a Taxonomia das Necessidades de Saúde. Identificou-se que os usuários perceberam-se como detentores de necessidades; o contexto social pode apresentar forte influência na sua saúde, verificando-se que a autonomia na tomada de decisões é uma necessidade. Quanto ao vínculo, percebe-se que está intimamente ligado às necessidades de autonomia/autocuidado, pois de certo modo é reforçando a relação de confiança que será possível fortalecer os potenciais para o enfrentamento do processo saúde-doença. Conclui-se que existe a necessidade de instrumentos que auxiliem o profissional da área da Saúde Coletiva a identificar as necessidades de saúde dos usuários.

Dye-Sensitized Solar Cells Based on High Surface Area Nanocrystalline Zinc Oxide Spheres

Directory of Open Access Journals (Sweden)

Pavuluri Srinivasu

2011-01-01

Full Text Available High surface area nanocrystalline zinc oxide material is fabricated using mesoporous nanostructured carbon as a sacrificial template through combustion process. The resulting material is characterized by XRD, N2 adsorption, HR-SEM, and HR-TEM. The nitrogen adsorption measurement indicates that the materials possess BET specific surface area ca. 30 m2/g. Electron microscopy images prove that the zinc oxide spheres possess particle size in the range of 0.12 μm–0.17 μm. The nanocrystalline zinc oxide spheres show 1.0% of energy conversion efficiency for dye-sensitized solar cells.

Survival and detection of rotaviruses on environmental surfaces in day care centers.

Science.gov (United States)

Keswick, B H; Pickering, L K; DuPont, H L; Woodward, W E

1983-01-01

Previously, we demonstrated that children in day care centers commonly experience diarrhea due to rotavirus, giardia, and bacterial pathogens. Multiple agents frequently coexist, and the environment is heavily contaminated with enteric bacteria during outbreaks. A study of environmental surface contamination with rotavirus was performed during three non-outbreak periods. Of 25 samples collected from environmental surfaces and teachers hands at a day care center, 4 (16%) were positive for rotavirus antigen when a fluorescence assay was used. We also examined the survival of two animal viruses, rotavirus SA-11 and poliovirus type 1, and bacteriophage 12 on similar environmental surfaces in a laboratory. Poliovirus type 1 and bacteriophage f2 were more resistant to drying than rotavirus SA-11 and could be recovered after a 90-min exposure on a dry surface. Rotavirus SA-11 could be detected for 30 min. All three viruses survived longer when they were suspended in fecal material than when they were suspended in distilled water. These data suggest that several agents, including rotavirus, can remain viable on contaminated surfaces long enough to be transmitted to susceptible children. This finding helps explain why rotavirus shows a mode of spread like that of parasitic and bacterial agents within day care center settings. PMID:6314896

[Programa de saúde: a case of book censorship during the Brazilian military dictatorship].

Science.gov (United States)

Reimão, Sandra

2013-11-30

Some documents produced by the government during the Brazilian military dictatorship have been made available for reference, including censors' reports on television and radio programs, plays, films, songs, advertisements and printed matter. Of the 500 or so reports on books, there is one that vetoes Programa de saúde: projetos e temas de higiene e saúde, an educational work that proposed actions to help students understand their sanitary conditions and acquire knowledge about health and health-promoting habits in this area. The argument for vetoing it was that the information could fall into the hands of poorly trained teachers, who could distort its content, causing serious damage to Brazilian youth. In this report we see evidence of the obscurantist, elitist posture adopted by the Department of Censorship of Public Entertainment, which aimed to restrict the circulation of information and curb debate.

Editorial | Scott | Ergonomics SA

African Journals Online (AJOL)

Ergonomics SA. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 23, No 1 (2011) >. Log in or Register to get access to full text downloads. Username, Password, Remember me, or Register. DOWNLOAD FULL TEXT Open Access DOWNLOAD FULL TEXT ...

Surface area of lactose and lactose granulates on consolidation and compaction

NARCIS (Netherlands)

Riepma, Klaas Alouis

1993-01-01

This dissertation discusses the effect of short time storage at different conditions on the strength and the specific BET surface area of lactose tablets. In addition, some aspects are studied of the consolidation and compaction properties of crystalline lactose fractions in heterogeneous systems.

Comparison of 2 root surface area measurement methods: 3-dimensional laser scanning and cone-beam computed tomography

International Nuclear Information System (INIS)

Tasanapanont, Jintana; Apisariyakul, Janya; Wattanachai, Tanapan; Jotikasthira, Dhirawat; Sriwilas, Patiyut; Midtboe, Marit

2017-01-01

The aim of this study was to compare the use of 3-dimensional (3D) laser scanning and cone-beam computed tomography (CBCT) as methods of root surface measurement. Thirty teeth (15 maxillary first premolars and 15 mandibular first premolars) from 8 patients who required extractions for orthodontic treatment were selected. Before extraction, pre-treatment CBCT images of all the patients were recorded. First, a CBCT image was imported into simulation software (Mimics version 15.01; Materialise, Leuven, Belgium) and the root surface area of each tooth was calculated using 3-Matic (version 7.01, Materialise, Leuven, Belgium). After extraction, all the teeth were scanned and the root surface area of each extracted tooth was calculated. The root surface areas calculated using these 2 measurement methods were analyzed using the paired t-test (P<.05). Correlations between the 2 methods were determined by calculating the Pearson correlation coefficient. The intraclass correlation coefficient (ICC) was used to assess intraobserver reliability. The root surface area measurements (230.11±41.97 mm"2) obtained using CBCT were slightly greater than those (229.31±42.46 mm2) obtained using 3D laser scanning, but not significantly (P=.425). A high Pearson correlation coefficient was found between the CBCT and the 3D laser scanner measurements. The intraobserver ICC was 1.000 for 3D laser scanning and 0.990 for CBCT. This study presents a novel CBCT approach for measuring the root surface area; this technique can be used for estimating the root surface area of non-extracted teeth

Comparison of 2 root surface area measurement methods: 3-dimensional laser scanning and cone-beam computed tomography

Energy Technology Data Exchange (ETDEWEB)

Tasanapanont, Jintana; Apisariyakul, Janya; Wattanachai, Tanapan; Jotikasthira, Dhirawat [Dept. of Orthodontics and Pediatric Dentistry, Faculty of Dentistry, Chiang Mai University, Chiang Mai (Thailand); Sriwilas, Patiyut [Dept. of Radiology, Faculty of Medicine Siriraj Hospital, Mahidol University, Bangkok (Thailand); Midtboe, Marit [Dept. of Clinical Dentistry - Orthodontics, Faculty of Medicine and Dentistry, University of Bergen, Bergen (Norway)

2017-06-15

The aim of this study was to compare the use of 3-dimensional (3D) laser scanning and cone-beam computed tomography (CBCT) as methods of root surface measurement. Thirty teeth (15 maxillary first premolars and 15 mandibular first premolars) from 8 patients who required extractions for orthodontic treatment were selected. Before extraction, pre-treatment CBCT images of all the patients were recorded. First, a CBCT image was imported into simulation software (Mimics version 15.01; Materialise, Leuven, Belgium) and the root surface area of each tooth was calculated using 3-Matic (version 7.01, Materialise, Leuven, Belgium). After extraction, all the teeth were scanned and the root surface area of each extracted tooth was calculated. The root surface areas calculated using these 2 measurement methods were analyzed using the paired t-test (P<.05). Correlations between the 2 methods were determined by calculating the Pearson correlation coefficient. The intraclass correlation coefficient (ICC) was used to assess intraobserver reliability. The root surface area measurements (230.11±41.97 mm{sup 2}) obtained using CBCT were slightly greater than those (229.31±42.46 mm2) obtained using 3D laser scanning, but not significantly (P=.425). A high Pearson correlation coefficient was found between the CBCT and the 3D laser scanner measurements. The intraobserver ICC was 1.000 for 3D laser scanning and 0.990 for CBCT. This study presents a novel CBCT approach for measuring the root surface area; this technique can be used for estimating the root surface area of non-extracted teeth.

Critical care admission of South African (SA surgical patients: Results of the SA Surgical Outcomes Study

Directory of Open Access Journals (Sweden)

David Lee Skinner

2017-05-01

Full Text Available Background. Appropriate critical care admissions are an important component of surgical care. However, there are few data describing postoperative critical care admission in resource-limited low- and middle-income countries. Objective. To describe the demographics, organ failures, organ support and outcomes of non-cardiac surgical patients admitted to critical care units in South Africa (SA. Methods. The SA Surgical Outcomes Study (SASOS was a 7-day national, multicentre, prospective, observational cohort study of all patients ≥16 years of age undergoing inpatient non-cardiac surgery between 19 and 26 May 2014 at 50 government-funded hospitals. All patients admitted to critical care units during this study were included for analysis. Results. Of the 3 927 SASOS patients, 255 (6.5% were admitted to critical care units; of these admissions, 144 (56.5% were planned, and 111 (43.5% unplanned. The incidence of confirmed or strongly suspected infection at the time of admission was 35.4%, with a significantly higher incidence in unplanned admissions (49.1 v. 24.8%, p<0.001. Unplanned admission cases were more frequently hypovolaemic, had septic shock, and required significantly more inotropic, ventilatory and renal support in the first 48 hours after admission. Overall mortality was 22.4%, with unplanned admissions having a significantly longer critical care length of stay and overall mortality (33.3 v. 13.9%, p<0.001. Conclusion. The outcome of patients admitted to public sector critical care units in SA is strongly associated with unplanned admissions. Adequate ‘high care-dependency units’ for postoperative care of elective surgical patients could potentially decrease the burden on critical care resources in SA by 23%. This study was registered on ClinicalTrials.gov (NCT02141867.

Level of Need for Cognition and Metacognitive Thinking among Undergraduate Kindergarten Female Students at King Sa'ud University in Sa'udi Arabia

Science.gov (United States)

Daghistani, Bulquees

2015-01-01

This study aims at examining the level of need for cognition and metacognitive thinking among undergraduate kindergarten female students in Education Faculty at King Sa'ud University in Sa'udi Arabia from their own perceptions. Results showed that the need for the cognition level was moderate, but metacognitive thinking level was high. In…

A Three-Dimensional Enormous Surface Area Aluminum Microneedle Array with Nanoporous Structure

OpenAIRE

Chen, Po Chun; Hsieh, Sheng Jen; Chen, Chien Chon; Zou, Jun

2013-01-01

We proposed fabricating an aluminum microneedle array with a nanochannel structure on the surface by combining micromachining, electrolyte polishing, and anodization methods. The microneedle array provides a three-dimensional (3D) structure that possesses several hundred times more surface area than a traditional nanochannel template. Therefore, the microneedle array can potentially be used in many technology applications. This 3D microneedle array device can not only be used for painless inj...

Habitação e saúde

Directory of Open Access Journals (Sweden)

Suzana Pasternak

2016-04-01

Full Text Available O artigo discute o conceito de moradia adequada, constatando que os indicadores utilizados no Brasil, embora adequados para o momento e o local, não cobrem todas as condições habitacionais para promover a saúde e o bem-estar dos moradores. Explicita a relação habitação-saúde através da análise de quatro dimensões: casa e doenças transmissíveis, casa e necessidades fisiológicas, casa e acidentes domésticos, casa e saúde mental. Utilizando informações do Censo de 2010 e estatísticas vitais de 2012, analisa as condições urbanas e domiciliares do município de São Paulo, observando que o padrão da mortalidade infantil e geral varia espacialmente. Finaliza o artigo com a descrição das condições ambientais das favelas paulistanas.

Modeled effects on permittivity measurements of water content in high surface area porous media

International Nuclear Information System (INIS)

Jones, S.B.; Or, Dani

2003-01-01

Time domain reflectometry (TDR) has become an important measurement technique for determination of porous media water content and electrical conductivity due to its accuracy, fast response and automation capability. Water content is inferred from the measured bulk dielectric constant based on travel time analysis along simple transmission lines. TDR measurements in low surface area porous media accurately describe water content using an empirical relationship. Measurement discrepancies arise from dominating influences such as bound water due to high surface area, extreme aspect ratio particles or atypical water phase configuration. Our objectives were to highlight primary factors affecting dielectric permittivity measurements for water content determination in porous mixtures, and demonstrate the influence of these factors on mixture permittivity as predicted by a three-phase dielectric mixture model. Modeled results considering water binding, higher porosity, constituent geometry or phase configuration suggest any of these effects individually are capable of causing permittivity reduction, though all likely contribute in high surface area porous media

Remedial Investigation Report on Bear Creek Valley Operable Unit 2 (Rust Spoil Area, Spoil Area 1, and SY-200 Yard) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1, Main text

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-01-01

This report on the BCV OU 2 at the Y-12 Plant, was prepared in accordance with requirements under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) for reporting the results of a site characterization for public review. It provides the Environmental Restoration Program with information about the results of the 1993 investigation. It includes information on risk assessments that have evaluated impacts to human health and the environment. Field activities included collection of subsurface soil samples, groundwater and surface water samples, and sediments and seep at the Rust Spoil Area (RSA), SY-200 Yard, and SA-1.

Remedial Investigation Report on Bear Creek Valley Operable Unit 2 (Rust Spoil Area, Spoil Area 1, and SY-200 Yard) at the Oak Ridge Y-12 Plant, Oak Ridge, Tennessee. Volume 1, Main text

International Nuclear Information System (INIS)

1995-01-01

This report on the BCV OU 2 at the Y-12 Plant, was prepared in accordance with requirements under the Comprehensive Environmental Response, Compensation, and Liability Act (CERCLA) for reporting the results of a site characterization for public review. It provides the Environmental Restoration Program with information about the results of the 1993 investigation. It includes information on risk assessments that have evaluated impacts to human health and the environment. Field activities included collection of subsurface soil samples, groundwater and surface water samples, and sediments and seep at the Rust Spoil Area (RSA), SY-200 Yard, and SA-1

Ações de saúde na estratégia saúde da família no município goiano na perspectiva da integralidade

Directory of Open Access Journals (Sweden)

Fabiana Ribeiro Santana

2013-06-01

Full Text Available Objetivou-se com este estudo analisar as ações de saúde desenvolvidas por equipes de saúde da família em um município do sudeste goiano à luz da integralidade. Trata-se de pesquisa exploratória descritiva de abordagem qualitativa. A coleta de dados foi realizada por meio de entrevistas e, após uma análise de conteúdo, elegeram-se três categorias temáticas: Ações dos trabalhadores e articulação entre elas; A ESF não funciona como Estratégia Saúde da Família;Atualização das equipes de saúde da família. Os resultados demonstram a fragmentação das ações e desarticulação entre os trabalhadores, o que dificulta a integralidade. Concluiu-se, assim, que existe uma necessidade de investimentos na educação permanente em saúde, no fortalecimento do controle social, na avaliação participativa no SUS e no aprimoramento de tecnologias de gestão e cuidado.

Mathematics teachers' beliefs about scientific approach (SA) and implementation in mathematics learning

Science.gov (United States)

Mutholib, Ahmad Abdul; Sujadi, Imam; Subanti, Sri

2017-08-01

SA is the approach used for the exploration of research and answer questions. Teachers' beliefs have a greater influence than the teacher's knowledge of designing lesson plans in the classroom. The objectives of this study are to explore the teachers' beliefs in SA, to reveal how the beliefs are reflected in classroom practices; and to figure out the factors affecting their beliefs and practices of SA to the teaching of mathematics. This qualitative research applied case study. The data was gained from classroom observation, face-to-face interview, and documentation. Interactive models from Miles and Huberman were used to examine the data. Results of the study: 1) The teachers believe about the conception of SA. They also believe that the SA is important and gives impact to students' progress. They believe that by applying SA, the target of mathematics learning is acquired. As to learning procedure, they believe that SA steps are conducted in sequence by combining some steps for each. 2) Teachers formulate their beliefs of applying the five scientific step of integrating all steps by keeping the sequence. Teachers argue that target of mathematics learning can be attained by some ways, namely presence of theoretical and practical support, teachers' guidance, providing variety of media and motivation to students. 3) There are five factors which influence teachers' beliefs and practices of SA, namely learning and teaching experience, teachers' motivation, sharing with colleagues and facility. This study concludes that teachers believe in the importance of SA, therefore they implement it in the classroom.

Promoção de Saúde e a Funcionalidade Humana

Directory of Open Access Journals (Sweden)

Ana Cristhina de Oliveira Brasil

2013-03-01

Full Text Available Para a elaboração de políticas públicas de saúde no Brasil, dois aspectos devem ser levados em consideração, a saber, a transição demográfica e a transição epidemiológica. Cada vez mais, observa-se um aumento no número de pessoas idosas convivendo com inúmeras incapacidades e, ainda, um perfil epidemiológico. A Pesquisa Nacional por Amostra de Domicílios (PNAD 1998-2003 indica uma distribuição de doenças crônicas que, consequentemente, tem gerado um número expressivo de incapacidades. Essas pessoas com incapacidades necessitam dos serviços de saúde, e os utilizam quando conseguem ter acesso a eles. Contudo, os modelos vigentes de atenção à saúde do idoso ou à saúde das pessoas com deficiência são de alto custo e, em alguns aspectos, não se apresentam eficientes, demandando estratégias de prevenção e equipamentos de saúde destinados à manutenção ou recuperação da saúde de uma população mais envelhecida. Desse modo, a agenda de política pública do Brasil deveria priorizar a manutenção da funcionalidade dos idosos, com monitoramento das condições de saúde, ações preventivas específicas de saúde e educação, e cuidados buscando uma atenção multidimensional e integral, não necessariamente centrada na doença(1.A necessidade de se elaborar políticas e estratégias, em especial de promoção de saúde, com um olhar descentralizado da doença se justifica porque os problemas de saúde advêm não somente de doenças, mas de qualquer outra condição ou circunstância de saúde, tais como agravos, gravidez, envelhecimento, estresse, predisposição genética – todas classificadas pela CID-10, contudo, sem poder mensurar as mudanças de estado relativas à condição de saúde, e muito menos classificar para descrever o contexto em que esses problemas acontecem, o que dificulta e compromete o planejamento e a resolubilidade das ações e dos serviços em saúde, diferentemente dos dados por