Scale Transformations and Information Presentation in Supervisory Control

DEFF Research Database (Denmark)

Petersen, Johannes; May, Michael

2006-01-01

It is commonly accepted that designers of supervisory control systems cannot comprehensively anticipate operators' information needs. In order to compensate the lack between the information presented by the Supervisory control system and the information needed, operators tailor the information...... presentation. Currently, there is a lack of theoretical understanding of tailoring activities and hence fundamental principles for the design of Supervisory control systems that support tailoring activities in a systematic manner. Any data being presented to the operator is oil one of the four different scale...... the paper proposes systematic principles for operator-initiated adaptation of the interpretation of system properties as presented by the supervisory control system. The value of the approach is illustrated by means of examples. (c) 2005 Elsevier Ltd. All rights reserved....

Supervisory monitoring system in nuclear power plants

International Nuclear Information System (INIS)

Ciftcioglu, O.; Turkcan, E.

1997-01-01

Monitoring of a power plant is one of the essential tasks during operation and the computer-based implementations are nowadays seemingly quite mature. However, presently these are still not satisfactory enough to meet the high standards to the licensing requirements and they are mostly not truly integrated to the plant's design-based monitoring system. This is basically due to the robustness problem as the majority of the methods are not robust enough for the monitoring of the safety parameter set in a plant or intelligent supervision. Therefore, a supervisory monitoring system (SMS) in a plant is necessary to supervise the monitoring tasks: determining the objectives to be obtained and finding the means to support them. SMS deals with the changing plant status and the coordination of the information flow among the monitoring subunits. By means of these robustness and consistency in monitoring is achieved. The paper will give the guidelines of knowledge and data management techniques in a framework of robust comprehensive and coordinated monitoring which is presented as supervisory monitoring. Such a high level monitoring serves for consistent and immediate actions in fault situations while this particularly has vital importance in preventing imminent severe accidents next to the issues of recognition of the monitoring procedures for licensing and enhanced plant safety. (author). 8 refs, 5 figs

Model-Based Engineering of Supervisory Controllers using CIF

NARCIS (Netherlands)

Schiffelers, R.R.H.; Theunissen, R.J.M.; Beek, van D.A.; Rooda, J.E.; Levendovsky, T.; Lengyel, L.

2009-01-01

In the Model-Based Engineering (MBE) paradigm, models are the core elements in the design process of a system from its requirements to the actual implementation of the system. By means of Supervisory Control Theory (SCT), supervisory controllers (supervisors) can be synthesized instead of

Self-Disclosure as a Predictor of EAP Supervisory Utilization

Science.gov (United States)

Donohoe, Timothy L.; Johnson, James T.; Taquino, Maurice A.

1999-01-01

The value of Employee Assistance Programs (EAPS) has been cited in a variety of published papers and articles. An important managerial element relative to the assessment and referral of troubled employees has been supervisory training. There has been numerous studies highlighting the various factors and circumstances associated with supervisory behavior and EAP referrals. The inclusion of emotional awareness factors in EAP supervisory utilization has not been thoroughly investigated, although frequently found in the literature as a training and development objective for managers in business and education. The present study sought to determine what role supervisory denial and anxiety avoidance plays in confrontation of troubled employees and if admission of specific, internal emotional events is a characteristic among EAP utilizing supervisors.

Application of optimal control principles to describe the supervisory control behavior of AAA crew members

Science.gov (United States)

Hale, C.; Valentino, G. J.

1982-01-01

Supervisory decision making and control behavior within a C(3) oriented, ground based weapon system is being studied. The program involves empirical investigation of the sequence of control strategies used during engagement of aircraft targets. An engagement is conceptually divided into several stages which include initial information processing activity, tracking, and ongoing adaptive control decisions. Following a brief description of model parameters, two experiments which served as initial investigation into the accuracy of assumptions regarding the importance of situation assessment in procedure selection are outlined. Preliminary analysis of the results upheld the validity of the assumptions regarding strategic information processing and cue-criterion relationship learning. These results indicate that this model structure should be useful in studies of supervisory decision behavior.

Development of intelligent supervisory control system

International Nuclear Information System (INIS)

Takizawa, Y.; Fukumoto, A.; Makino, M.; Takiguchi, S.

1994-01-01

The objective of the development of an intelligent supervisory control system for next generation plants is enhancement of the operational reliability by applying the recent outcome of artificial intelligence and computer technologies. This system consists of the supervisory control and monitoring for automatic operation, the equipment operation support for historical data management and for test scheduling, the operators' decision making support for accidental plant situations and the human-friendly interface of these support functions. The verification test results showed the validity of the functions realized by this system for the next generation control room. (author)

Assistance tools for generic definition of ITER maintenance tasks and scenarios in advanced supervisory control systems

International Nuclear Information System (INIS)

Zieba, Stéphane; Russotto, François-Xavier; Da Silva Simoes, Max; Measson, Yvan

2013-01-01

Highlights: ► Improve supervisory control systems for ITER in-vessel and hot cell maintenance. ► Optimize remote handling operations effectiveness, reliability and safety. ► Provide a generic description of the maintenance tasks and scenarios. ► Development of context-based assistances for operators and supervisor. ► Improvement of operator's situation awareness. -- Abstract: This paper concerns the improvement of supervisory control systems in the context of remote handling for the maintenance tasks in ITER. This work aims at providing a single formalism and tools to define in a generic way the ITER maintenance tasks and scenarios for in-vessel and hot cell operations. A three-layered approach is proposed to model these tasks and scenarios. Physical actions are defined for the scene elements. From these physical actions, behaviours are defined to represent high-level functionalities. Finally, interaction modes define the way that behaviours are achieved in terms of human–machine interactions. Case study concerning the blanket maintenance procedure is discussed concerning the contributions of the descriptive model and the context-based assistances to the activities of supervisory control

Leadership Development: A Supervisory Responsibility

National Research Council Canada - National Science Library

French, David

2000-01-01

.... This is a recurring theme found throughout leadership literature and speeches. The US Air Force clearly establishes subordinate development as a supervisory responsibility in top-level doctrine...

12 CFR 261.20 - Confidential supervisory information made available to supervised financial institutions and...

Science.gov (United States)

2010-01-01

... available to supervised financial institutions and financial institution supervisory agencies. 261.20... Supervised Institutions, Financial Institution Supervisory Agencies, Law Enforcement Agencies, and Others in... institutions and financial institution supervisory agencies. (a) Disclosure of confidential supervisory...

Review of first line supervisory positions in nuclear power plants - Phase II

Energy Technology Data Exchange (ETDEWEB)

Mackenzie, C W; Huntley, M [Hickling Corp., Ottawa, ON (Canada)

1995-10-01

This report provides an overview of first line supervisory activities at Ontario Hydro nuclear generating stations (Pickering `A` and Bruce `B`) and the Point Lepreau nuclear generating station in New Brunswick. Activity profiles describing the range of first line supervisory roles and responsibilities for nuclear operators have been developed from survey data and flowcharting methods. These activity profiles have then been compared with formal job responsibilities as identified in job descriptions, supervisory training provided and assessment criteria used to evaluate supervisors. Finally, this report relates the findings of supervisory practices in the group under study with the findings in the current literature relating to supervisory functioning. (author). 32 tabs., 2 figs.

Review of first line supervisory positions in nuclear power plants - Phase II

International Nuclear Information System (INIS)

Mackenzie, C.W.; Huntley, M.

1995-10-01

This report provides an overview of first line supervisory activities at Ontario Hydro nuclear generating stations (Pickering 'A' and Bruce 'B') and the Point Lepreau nuclear generating station in New Brunswick. Activity profiles describing the range of first line supervisory roles and responsibilities for nuclear operators have been developed from survey data and flowcharting methods. These activity profiles have then been compared with formal job responsibilities as identified in job descriptions, supervisory training provided and assessment criteria used to evaluate supervisors. Finally, this report relates the findings of supervisory practices in the group under study with the findings in the current literature relating to supervisory functioning. (author). 32 tabs., 2 figs

Modular supervisory controller for hybrid power systems

Energy Technology Data Exchange (ETDEWEB)

Lemos Pereira, A. de

2000-06-01

The power supply of remote places has been commonly provided by thermal power plants, usually diesel generators. Although hybrid power systems may constitute the most economical solution in many applications their widespread application to the electrification schemes of remote areas still depends on improvements in the issues of design and operation control. The main limitations of the present hybrid power systems technology, which are identified in this work, are related to the control and supervision of the power system. Therefore this thesis focuses on the modularity of supervisory controllers in order to design cost-competitive and reliable hybrid power systems. The modular supervisory controller created in this project is considered an important part of a system design approach that aims to overcome the technical difficulties of the current engineering practice and contribute to open the market of hybrid power systems. The term modular refers to a set of design characteristics that allows the use of basically the same supervisory controller in different projects. The modularization and standardisation of the controller include several issues such as interfacing components, communication protocols, modelling, programming and control strategies. The modularity can reduce the highly specialised system engineering related to the integration of components, operation and control. It can also avoid the high costs for installation, service and maintenance. A modular algorithm for supervisory controllers has been developed (a Matlab program called SuperCon) using an object-oriented design and it has been tested through several simulations using different hybrid system configurations and different control strategies. This thesis presents a complete control system design process which can be used as the basis for the development and implementation of intelligent and autonomous supervisory controllers for hybrid power systems with modular characteristics. (au)

The Supervisory Process of EFL Teachers: A Case Study

Science.gov (United States)

Chen, Cheryl Wei-Yu; Cheng, Yuh-show

2013-01-01

Supervision is an essential part of language teachers' professional experiences. The literature on language teacher supervision from the past few decades consists largely of descriptions of supervisory approaches (Bailey, 2009) and analysis of the supervisory discourse (Hooton, 2008; Wajnryb, 1994; 1995; 1998; Wallace & Woolger, 1991). This…

Perceptions of Administrative and Supervisory Support in Public Child Welfare

Directory of Open Access Journals (Sweden)

Tonya M. Westbrook

2012-06-01

Full Text Available Using the Child Welfare Organizational Culture Inventory (CWOCI in a public child welfare agency, perceptions of administrative and supervisory support held by employees with social work degrees (BSW and MSW were compared to perceptions of administrative and supervisory support held by employees without social work degrees. Child welfare employees with social work degrees reported lower administrative and supervisory support than employees without social work degrees. Implications for social work educators, public child welfare administrators and supervisors, and future research are presented.

Extended supervisory control of Peirce-Smith converter

International Nuclear Information System (INIS)

Hadjiski, Mincho; Boshnakov, Kosta

2014-01-01

In this paper some problems of the tight integration of the Process Control (PC) and Condition Based Maintenance (CBM) are considered in the creation of a supervised control system for Peirce-Smith Converter. The motivation of this approach is carried out on the base of numerous experimental data analyses, which show a significant improving potential. Because of a very high level of stochastic components in the direct measurements, due to the melt crystallisation a data driven degradation model is derived. A multistage procedure is proposed for effective Maintenance Decision Making (MDM) using a threshold based policy, Rule-Based Reasoning (RBR) and Case-Based Reasoning (CBR). The extended functionality of the proposed system is discussed. Key words: mathematical modelling, Peirce-Smith converter (PSC), rule-based reasoning (RBR), supervisory control, threshold based maintenance, maintenance decision making

Supervisory selection and development yields payback

International Nuclear Information System (INIS)

Rubino, E.A.

1991-01-01

The selection and development of first line supervisors is a critical factor in a strategic effort to bring about organizational change, to improve performance and productivity and to enhance professionalism in the work force. Candidates for first line supervisory positions at Philadelphia Electric Company are no longer promoted purely on the basis of seniority. A Supervisory Selection Assessment Center permits candidates to demonstrate leadership potential. Successful candidates then attend an eight week Supervisory Development Academy, away from the work place. On successful completion of the Academy, the supervisor assembles his or her work team and, with training and leadership, shapes a performance based work team ready to plan, execute and assess its own work. Since this radically different program was initiated in September, 1989, results have been highly acclaimed by management. Contractor support has been sharply reduced, budgets have been met and reduced more work has been accomplished and fewer overtime hours have been needed. Workers attend training with no loss of team productivity. Each SDA graduate and his team sets goals to improve quality, increase productivity, increase efficiency, maintain ALARA, improve safety and effect cultural change while improving job satisfaction and morale

Application of functional analysis techniques to supervisory systems

International Nuclear Information System (INIS)

Lambert, Manuel; Riera, Bernard; Martel, Gregory

1999-01-01

The aim of this paper is to apply firstly two interesting functional analysis techniques for the design of supervisory systems for complex processes, and secondly to discuss the strength and the weaknesses of each of them. Two functional analysis techniques have been applied, SADT (Structured Analysis and Design Technique) and FAST (Functional Analysis System Technique) on a process, an example of a Water Supply Process Control (WSPC) system. These techniques allow a functional description of industrial processes. The paper briefly discusses the functions of a supervisory system and some advantages of the application of functional analysis for the design of a 'human' centered supervisory system. Then the basic principles of the two techniques applied on the WSPC system are presented. Finally, the different results obtained from the two techniques are discussed

Supervisory Control System Architecture for Advanced Small Modular Reactors

Energy Technology Data Exchange (ETDEWEB)

Cetiner, Sacit M [ORNL; Cole, Daniel L [University of Pittsburgh; Fugate, David L [ORNL; Kisner, Roger A [ORNL; Melin, Alexander M [ORNL; Muhlheim, Michael David [ORNL; Rao, Nageswara S [ORNL; Wood, Richard Thomas [ORNL

2013-08-01

This technical report was generated as a product of the Supervisory Control for Multi-Modular SMR Plants project within the Instrumentation, Control and Human-Machine Interface technology area under the Advanced Small Modular Reactor (SMR) Research and Development Program of the U.S. Department of Energy. The report documents the definition of strategies, functional elements, and the structural architecture of a supervisory control system for multi-modular advanced SMR (AdvSMR) plants. This research activity advances the state-of-the art by incorporating decision making into the supervisory control system architectural layers through the introduction of a tiered-plant system approach. The report provides a brief history of hierarchical functional architectures and the current state-of-the-art, describes a reference AdvSMR to show the dependencies between systems, presents a hierarchical structure for supervisory control, indicates the importance of understanding trip setpoints, applies a new theoretic approach for comparing architectures, identifies cyber security controls that should be addressed early in system design, and describes ongoing work to develop system requirements and hardware/software configurations.

32 CFR 776.53 - Responsibilities of the Judge Advocate General and supervisory attorneys.

Science.gov (United States)

2010-07-01

... of the Judge Advocate General and supervisory attorneys. (a) Responsibilities of the Judge Advocate General and supervisory attorneys. (1) The JAG and supervisory attorneys shall make reasonable efforts to... 32 National Defense 5 2010-07-01 2010-07-01 false Responsibilities of the Judge Advocate General...

30 CFR 75.1713-3 - First-Aid training; supervisory employees.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-Aid training; supervisory employees. 75... First-Aid training; supervisory employees. The mine operator shall conduct first-aid training courses... employee and date on which the employee satisfactorily completed the first-aid training course. The...

Supervisory control in a distributed, hierarchical architecture for a multimodular LMR

International Nuclear Information System (INIS)

Otaduy, P.J.; Brittain, C.R.; Rovere, L.A.

1989-01-01

This paper describes the directions and present status of the research in supervisory control for multimodular nuclear plants being conducted at Oak Ridge National Laboratory (ORNL) as part of US Department of Energy's (DOE) Advanced Controls Program. First, the hierarchical supervisory control structure envisioned for a Power Reactor Inherently Safe Module (PRISM) multimodular LMR is discussed. Next, the architecture of the supervisory module closest to the process actuators and its implementation for demonstration in a network of CPU's are presented. 12 refs., 3 figs

12 CFR 907.12 - Finance Board procedures.

Science.gov (United States)

2010-01-01

... 12 Banks and Banking 7 2010-01-01 2010-01-01 false Finance Board procedures. 907.12 Section 907.12 Banks and Banking FEDERAL HOUSING FINANCE BOARD FEDERAL HOUSING FINANCE BOARD ORGANIZATION AND OPERATIONS PROCEDURES Case-by-Case Determinations; Review of Disputed Supervisory Determinations § 907.12 Finance Board procedures. (a) Notice of Receipt...

Areva - Press release from the Supervisory Board; Areva - Communique de presse du Conseil de Surveillance

Energy Technology Data Exchange (ETDEWEB)

Marie, Patricia; Briand, Pauline; Floquet-Daubigeon, Fleur; Michaut, Maxime; Scorbiac, Marie de; Repaire, Philippine du

2012-02-14

properly applied. Moreover, it asked the Executive Board to finalize in the shortest possible time frame the internal procedure applicable to the review and validation of the various projects and decisions creating a commitment, and the procedures for monitoring their execution. In addition, it noted that the deliberations of the Executive Board, like those of the bodies or authorities having received delegation of authority from it, must be systematically documented in writing, and asked the Executive Board to ensure that this rule is thoroughly applied. It asked the Executive Board to install a resources and reserves committee under its direct authority, responsible for validating each year the resource and reserve estimates appearing in the Reference Document, based on the work of the Reserves Department. This committee, which will involve one or more recognized external experts, shall specify the methods and schedule for updating resources and reserves. Its work shall be reported on an annual basis to the Audit Committee. Reference to the installation and operation of this committee shall appear in the Reference Document published by AREVA. Lastly, it asked the Executive Board to study the transformation of the legal form of the company into a limited liability company with a board of directors. A summary of the ad hoc committee's report to the Supervisory Board is given in appendix

Recent advances in neonatology - new tasks for the radiologist; Entwicklungen in der Neonatologie. Anforderungen an den Radiologen

Energy Technology Data Exchange (ETDEWEB)

Klebermass, K.; Birnbacher, R.; Weninger, M.; Pollak, A. [Abt. fuer Neonatologie, angeborene Stoerungen und Intensivmedizin, Universitaetsklinik fuer Kinder- und Jugendheilkunde, Allgemeines Krankenhaus, Vienna (Austria)

2000-01-01

Modern neonatology comprises care for a growing number of infants with congenital abnormalities and an increasing number of premature born infants. The survival rates of premature infants have increased dramatically during the past decade. This increase in survival rates can be attributed to improved prenatal and obstetric management and to advances in neonatal intensive care medicine. Radiological support: Neonatology has become a pediatric subspeciality of its own resulting in the demand for an equally specialised radiological support. Therefore, the availability of a children's radiologist for radiological and sonographic examinations is mandatory (24 hours a day) for optimal patient care on a neonatal intensive care unit. A good cooperation between radiologist and neonatologist in neonatal intensive care medicine is therefore warranted. (orig.) [German] Die moderne Neugeborenenintensivmedizin umfasst neben den typischen neonatalen Krankheitsbildern eine wachsende Zahl kleiner Fruehgeborener mit einem Geburtsgewicht <1500 g und eine, durch verbesserte praenatale Diagnostik, zunehmend groesser werdende Gruppe von Kindern mit komplexen Fehlbildungen. Anforderungen an den Radiologen: Diese Entwicklungen stellen auch an den Radiologen neue Anforderungen; neben der zunehmenden Zahl an Fruehgeborenen und ihren speziellen Krankheitsbildern ist auch die Abklaerung von speziellen, beim Intensivpatienten auftretenden Problemen erforderlich. Durch die meist gegebene Dringlichkeit der radiologischen Abklaerung ist die Verfuegbarkeit eines Kinderradiologen rund um die Uhr unabdingbar. Zudem muessen fahrbare Roentgen- und Ultraschallgeraete zur Verfuegung stehen, um eine Diagnostik direkt am Krankenbett zu ermoeglichen. Diskussion: An einer Neugeborenenintensivstation ist daher eine enge Zusammenarbeit mit dem Kinderradiologen unbedingt notwendig. (orig.)

SUPERVISORY CONTROL FOR PEAK REDUCTION IN COMMERCIAL BUILDINGS WHILE MAINTAINING COMFORT

Energy Technology Data Exchange (ETDEWEB)

Nutaro, James J [ORNL; Olama, Mohammed M [ORNL; Kuruganti, Teja [ORNL

2016-01-01

This paper describes a supervisory control strategy for limiting peak power demand by small and medium commercial buildings while still meeting the business needs of the occupants. This control strategy has two features that make it relevant to new and existing buildings. First, it is designed to operate with building equipment, such as air conditioning and refrigeration systems, as they are presently installed in most small and medium commercial buildings. Because of this, the supervisory control could be realized as a software-only retrofit to existing building management systems. Second, the proposed control acts as a supervisory management layer over existing control systems, rather than replacing them outright. The primary idea of this approach is that the controls for individual building equipment request energy resources for a control action and the supervisory control examines the requests and decides which control actions to allow while satisfying a limit on peak power demand.

Impaired Job Performance and Critical Incidents: Factors Influencing Supervisory EAP Referrals.

Science.gov (United States)

Harley, David A.

Relatively little empirical research has been done on the supervisory referral of employees to employee assistance programs (EAPs). Inclusion of constructive confrontation (supervisory referral) into program standards and its continued promotion as a "central strategy" of program theory and operation calls for critical investigation of…

Development of an Automated Decision-Making Tool for Supervisory Control System

Energy Technology Data Exchange (ETDEWEB)

Cetiner, Sacit M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Muhlheim, Michael David [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Flanagan, George F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Fugate, David L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

2014-09-01

This technical report was generated as a product of the Supervisory Control for Multi-Modular Small Modular Reactor (SMR) Plants project within the Instrumentation, Control and Human-Machine Interface technology area under the Advanced Small Modular Reactor (AdvSMR) Research and Development Program of the US Department of Energy. The report documents the definition of strategies, functional elements, and the structural architecture of a supervisory control system for multi-modular AdvSMR plants. This research activity advances the state of the art by incorporating real-time, probabilistic-based decision-making into the supervisory control system architectural layers through the introduction of a tiered-plant system approach. The report provides background information on the state of the art of automated decision-making, including the description of existing methodologies. It then presents a description of a generalized decision-making framework, upon which the supervisory control decision-making algorithm is based. The probabilistic portion of automated decision-making is demonstrated through a simple hydraulic loop example.

A Queueing Model for Supervisory Control of Unmanned Autonomous Vehicles

Science.gov (United States)

2013-09-01

Autonomous Vehicles Joseph DiVita, PhD Robert L. Morris Maria Olinda Rodas SSC Pacific Approved...298 (Rev. 8/98) Prescribed by ANSI Std. Z39.18 09–2013 Final A Queueing Model for Supervisory Control of Unmanned Autonomous Vehicles Joseph...Mission Area: Command and Control, Queueing Model; Supervisory Control; Unmanned Autonomous Vehicles M. O. Rodas U U U U 38 (619)

Migration of supervisory machine control architectures

NARCIS (Netherlands)

Graaf, B.; Weber, S.; Deursen, van A.; Nord, R.; Medvidovic, N.; Krikhaar, R.; Stafford, J.; Bosch, J.

2005-01-01

In this position paper, we discuss a first step towards an approach for the migration of supervisory machine control (SMC) architectures. This approach is based on the identification of SMC concerns and the definition of corresponding transformation rules.

Supervisory Control and Court Management

Directory of Open Access Journals (Sweden)

Andreas Lienhard

2009-08-01

Full Text Available Court management is an essential precondition for guaranteeing the adjudication of cases. At the same time, court administration is the key focus of supervisory control. Management instruments and structures, caseload management and other elements of quality assurance including the certification of judicial authorities must therefore be accorded considerable constitutional importance.

Automatic synthesis of supervisory control systems

NARCIS (Netherlands)

Najafi, E.

2016-01-01

Sequential composition is an effective supervisory control method for addressing control problems in nonlinear dynamical systems. It executes a set of controllers sequentially to achieve a control specification that cannot be realized by a single controller. Sequential composition focuses on the

Plant Modeling for Human Supervisory Control

DEFF Research Database (Denmark)

Lind, Morten

1999-01-01

This paper provides an overview of multilevel flow modelling (MFM) and its application for design of displays for the supervisory control of industrial plant. The problem of designing the inforrrzatian content of sacpervisory displays is discussed and plant representations like MFM using levels...

Design of an advanced human-centered supervisory system for a nuclear fuel reprocessing system

International Nuclear Information System (INIS)

Riera, B.; Lambert, M.; Martel, G.

1999-01-01

In the field of highly automated processes, our research concerns supervisory system design adapted to supervisory and default diagnosis by human operators. The interpretation of decisional human behaviour models shows that the tasks of human operators require different information, which has repercussions on the supervisory system design. We propose an advanced human-centred supervisory system (AHCSS) which is more adapted to human-beings, because it integrates new representation of the production system,(such as functional and behavioural aspects) with the use of advanced algorithms of detection and location. Based on an approach using these new concepts, and AHCSS was created for a nuclear fuel reprocessing system. (authors)

Supervisory behavior, reciprocity and subordinate absenteeism

NARCIS (Netherlands)

Dierendonck, van D.; Blanc, Le P.M.; Breukelen, van W.

2002-01-01

The present study among 242 professionals working in a lung clinic and nursing home was designed to test a model that links supervisory behavior (i.e. leader member exchange (LMX) behavior and conflict management behavior) and reciprocity in the supervisor/subordinate relationship to objectively

Ubiquitous Supervisory System Based on Social Contexts Using Ontology

Directory of Open Access Journals (Sweden)

Satoru Izumi

2009-01-01

Full Text Available As described in this paper, we propose a supervisory system that considers actual situations and social aspects of users in a ubiquitous computing environment. To realize gentle and safe supervision while providing efficient supervisory services, the system must recognize the situations of a watched person, such as the person's physical condition. To achieve this, we have proposed a ubiquitous supervisory system "uEyes", which introduces Social Context Awareness: a distinguishing feature for supervision. Using this feature, the system can combine environmental information acquired from sensors in the real world and common-sense knowledge related to human activities in daily life. As described in this paper, we specifically examine design of Social Context Awareness using ontology technologies. Based on this advanced feature, a live video streaming system is configured autonomously depending on the users' circumstances in runtime. We implemented a uEyes prototype for supervising elderly people and performed some experiments based on several scenarios. Based on those experimental results, we confirmed that the social contexts are handled effectively to support the supervision.

Review of the first line supervisory positions in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Mullin, D; Mackenzie, C W [Hickling Corp. (Canada)

1995-10-01

The authors review the nature of the tasks performed by first line maintenance supervisors in three nuclear power plants. They compare these tasks to core supervisory training curriculum, supervisory job descriptions, and both the process related to performance appraisals, and the criteria applied in carrying out these performance evaluations. Recommendations have been made concerning methods of increasing the relevancy of training and improving the performance appraisal process. ( author). 5 figs.

Review of the first line supervisory positions in nuclear power plants

International Nuclear Information System (INIS)

Mullin, D.; Mackenzie, C.W.

1995-10-01

The authors review the nature of the tasks performed by first line maintenance supervisors in three nuclear power plants. They compare these tasks to core supervisory training curriculum, supervisory job descriptions, and both the process related to performance appraisals, and the criteria applied in carrying out these performance evaluations. Recommendations have been made concerning methods of increasing the relevancy of training and improving the performance appraisal process. ( author). 5 figs

What happens at work stays at work? Workplace supervisory social interactions and blood pressure outcomes.

Science.gov (United States)

Wong, Jennifer H K; Kelloway, E Kevin

2016-04-01

We investigated the relationship between workplace supervisory social interactions and blood pressure outcomes using hourly diary entries and ambulatory blood pressure data from an experience sampling study of 55 long-term care employees. After accounting for relevant cardiovascular controls, significant effects of supervisory interactions on cardiovascular reactivity and recovery were found. Multilevel analyses revealed that negatively perceived supervisory interactions predicted higher systolic blood pressure at work (B = -1.59, p pressure recovery after work (B = -14.52, p < .05, N = 33). Specifically, negatively perceived supervisory interactions at work predicted poorer cardiovascular recovery after work. Suggestions for improving practices in organizations and in experience sampling research are discussed. (c) 2016 APA, all rights reserved).

A reconfigurable hybrid supervisory system for process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1994-01-01

This paper presents a reconfigurable approach to decision and control systems for complex dynamic processes. The proposed supervisory control system is a reconfigurable hybrid architecture structured into three functional levels of hierarchy, namely, execution, supervision, and coordination. While the bottom execution level is constituted by either reconfigurable continuously varying or discrete event systems, the top two levels are necessarily governed by reconfigurable sets of discrete event decision and control systems. Based on the process status, the set of active control and supervisory algorithm is chosen. The reconfigurable hybrid system is briefly described along with a discussion on its implementation at the Experimental Breeder Reactor II of Argonne National Laboratory. A process control application of this hybrid system is presented and evaluated in an in-plant experiment

A reconfigurable hybrid supervisory system for process control

International Nuclear Information System (INIS)

Garcia, H.E.; Ray, A.; Edwards, R.M.

1994-01-01

This paper presents a reconfigurable approach to decision and control systems for complex dynamic processes. The proposed supervisory control system is a reconfigurable hybrid architecture structured into three functional levels of hierarchy, namely, execution, supervision, and coordination. While, the bottom execution level is constituted by either reconfigurable continuously varying or discrete event systems, the top two levels are necessarily governed by reconfigurable sets of discrete event decision and control systems. Based on the process status, the set of active control and supervisory algorithm is chosen. The reconfigurable hybrid system is briefly described along with a discussion on its implementation at the Experimental Breeder Reactor 2 of Argonne National Laboratory. A process control application of this hybrid system is presented and evaluated in an in-plant experiment

Conceptual design of a new supervisory control system for JT-60SA

International Nuclear Information System (INIS)

Totsuka, Toshiyuki; Sakata, Shinya

2009-05-01

The functions of JT-60 discharge control computer system and the data processing computer system will be integrated into a new JT-60SA supervisory control system to improve the operational efficiency of the JT-60 control computer system. In this report, we first show the necessary requirements for the new JT-60SA supervisory control system that should have high cost performance and maintainability. Next, overall system image of the new JT-60SA supervisory control system is presented and the necessary functions and the issues to be solved in the development are shown. Finally, the necessary manpower for this development and performance of the computer hardware, and the expected reduction of maintenance cost of the computer system are described. (author)

Supervisory Turnover in Outpatient Substance Abuse Treatment

Science.gov (United States)

Knight, Danica K.; Broome, Kirk M.; Edwards, Jennifer R.; Flynn, Patrick M.

2009-01-01

Staff turnover is a significant issue within substance abuse treatment, with implications for service delivery and organizational health. This study examined factors associated with turnover among supervisors in outpatient substance abuse treatment. Turnover was conceptualized as being an individual response to organizational-level influences, and predictors represent aggregate program measures. Participants included 532 staff (including 467 counselors and 65 clinical/program directors) from 90 programs in four regions of the USA. Using logistic regression, analyses of structural factors indicated that programs affiliated with a parent organization and those providing more counseling hours to clients had higher turnover rates. When measures of job attitudes were included, only parent affiliation and collective appraisal of satisfaction were related to turnover. Subsequent analyses identified a trend toward increased supervisory turnover when satisfaction was low following the departure of a previous supervisor. These findings suggest that organizational-level factors can be influential in supervisory turnover. PMID:19949883

Supervisory Monitoring of Workplace at CIAE in 2011

Institute of Scientific and Technical Information of China (English)

无

2011-01-01

1 Introduction Based on The Routine Monitoring Programme for Workplace at CIAE in 2011 which approved by Division of Safe and Environmental Protection, a management sector of China Institute of Atomic Energy (CIAE), supervisory monitoring of

Supervisory control synthesis for a waterway lock

NARCIS (Netherlands)

Reijnen, F.F.H.; Goorden, M.A.; van de Mortel - Fronczak, J.M.; Rooda, J.E.

2017-01-01

Formal methods help in coping with the growing functionality and complexity, time-to-market and costs in cyber-physical systems (CPSs). Supervisory control synthesis (SCS) is such a method. It can be used to synthesize a controller for a CPS from the uncontrolled system model (plant) and the

Enabling Critical Reflection on Research Supervisory Practice

Science.gov (United States)

Pearson, Margot; Kayrooz, Carole

2004-01-01

This paper describes the development of an instrument--The Reflective Supervisor Questionnaire (RSQ). The RSQ maps the domain of research supervisory practice as a facilitative process involving educational tasks and activities. It is designed to assist research supervisors explore, by means of self-reflection and reflection on feedback from…

Sleep deprivation influences some but not all processes of supervisory attention

Science.gov (United States)

Jennings, J. R.; Monk, T. H.; van der Molen, M. W.

2003-01-01

Does one night of sleep deprivation alter processes of supervisory attention in general or only a specific subset of such processes? Twenty college-aged volunteers, half female, performed a choice reaction time task. A cue indicated that compatible (e.g., right button, right-pointing arrow) or incompatible (e.g., left button, right-pointing arrow) responses were to be given to a stimulus that followed 50 or 500 ms later. The paradigm assessed response inhibition, task-shifting skill, and task strategy-processes inherent in supervisory attention. Performance, along with heart rate, was assessed for 12 hr following normal sleep or a night of complete sleep deprivation. Sleep deprivation altered neither preparation for task shifting nor response inhibition. The ability to use preparatory bias to speed performance did decrease with sleep deprivation. Sleep deprivation appears to selectively affect this supervisory attention process, which is perceived as an active effort to cope with a challenging task.

A psychometric approach to supervisory competency assessment

Directory of Open Access Journals (Sweden)

A. Vorster

2003-10-01

Full Text Available The primary purpose of this study was to evaluate the possibility of using a psychometric approach for assessing supervisory competencies relevant to the mining and refining environment. The competency questionnaire was developed using supervisory roles and registered supervisory unit standards from the United Kingdom (UK, as no registered unit standards exist in South Africa. Twenty-four supervisors from three departments (Production, Engineering and Laboratory were evaluated by 125 raters; besides by themselves, also by their managers, peers, customers and their sub-ordinates. Based on difference scores derived from the Importance and Performance scales, a single factor was extracted with an internal reliability of 0,965. No statistical significant differences were obtained (ANOVA’s, t-test and F-statistics between groups based on biographical variables or between rater groups. The findings and their implications are further discussed. Opsomming Die primêre doel van die studie was om die moontlikheid vir die gebruik van ’n psigometriese benadering tot toesighouerbevoegdheidsbeoordeling, te evalueer. Die bevoegdheidsvraelys is ontwikkel deur gebruik te maak van toesighouersrolle en geregistreerde toesighouerseenheidstandaarde van die Verenigde Koningkryk, as gevolg van ‘n gebrek aan bestaande eenheidstandaarde in Suid-Afrika. Vier-en-twintig toesighouers van drie departemente (Produksie, Ingenieurswese en Laboratorium is deur 125 beoordelaars geëvalueer; buiten deur hulself, ook deur hul bestuurders, kollegas, kliënte en hul ondergeskiktes. ’n Enkele faktor, met ’n betroubaarheid van 0,965, gebaseer op die verskiltellings van die Prestasie- en Belangrikheidskaal, is onttrek. Geen beduidende verskille (ANOVA’s, t-toetse en F-statistiek kon tussen groepe gebaseer op biografiese veranderlikes en die onderskeie beoordelaarsgroepe gevind word nie. Hierdie bevindinge en die implikasies daarvan word verder bespreek.

Reforms to the European Union Financial Supervisory and Regulatory Architecture and Their Implications for Asia

NARCIS (Netherlands)

Z. Darvas (Zsolt); D. Schoenmaker (Dirk); N. Véron (Nicolas)

2017-01-01

textabstractEuropean Union (EU) countries offer a unique experience of financial regulatory and supervisory integration, complementing various other European integration efforts following the Second World War. Financial regulatory and supervisory integration was a very slow process before 2008,

A challenge for system vendors. The changing demands in the international power plant business; Eine Herausforderung fuer Systemlieferanten. Der Wandel der Anforderungen im internationalen Kraftwerksgeschaeft

Energy Technology Data Exchange (ETDEWEB)

Boehm, H.

1995-10-27

The power plant continuously requires the ability for innovation from the manufactures of power plants. The reduction of the current generation costs and the increase of the efficiency has been a permanent requirement since almost 110 years. (orig.) [Deutsch] Das Kraftwerksgeschaeft fordert die Innovationsfaehigkeit der Kraftwerkshersteller immer wieder aufs neue heraus. Die Senkung der Stromerzeugungskosten und die Erhoehung des Wirkungsgrades sind seit nunmehr fast 110 Jahren gleichbleibende Anforderungen. (orig.)

Narrative Kompetenz: Anforderungen an ein Verfahren der Sprach-standsfeststellung im Elementarbereich

Directory of Open Access Journals (Sweden)

Natalia Kapica

2014-10-01

Full Text Available Im vorliegenden Beitrag wird der Frage nachgegangen, welche Merkmale ein Verfahren zur Feststellung des Sprachstandes im Bereich Erzählkompetenz vereinen sollte, um nutzbare Informationen für die Planung an-schließender Fördermaßnahmen zu liefern. Dabei wird von der spracherwerbstheoretisch hergeleiteten Annahme ausgegangen, dass Förderangebote entwicklungssensitiv angelegt sein sollten, also von der erwartbaren Erwerbsprogression und dem jeweiligen Sprachstand des Kindes ausgehen sollten. Mit dieser diagnostischen Zielsetzung vor Augen werden anhand der Kategorien „entwicklungspsychologische/schulische Relevanz“, „profilanalytische Auswertung“ sowie „Authentizität der Sprachdaten“ Anforderungen an ein förderdiagnostisches Verfahren formuliert und exemplarisch auf Erkenntnisse der Spracherwerbsforschung zurückbezogen. The present article addresses the question of which characteristics a language proficiency assessment of children ́s narrative competence should possess to allow for its results to be used for planning subsequent assistance measures.The underlying assumption states that language acquisition processes follow their own inherent developmental pathway. Language promotion programmes should therefore be responsive to the children's development and be based on the respective proficiency level and the learning progress that may be expected. In view of this objective, the article specifies requirements on „interventional diagnostics” and correlates these with insights from languageacquisition research.

Supervisory Control and Diagnostics System Distributed Operating System

International Nuclear Information System (INIS)

McGoldrick, P.R.

1979-01-01

This paper contains a description of the Supervisory Control and Diagnostics System (SCDS) Distributed Operating System. The SCDS consists of nine 32-bit minicomputers with shared memory. The system's main purpose is to control a large Mirror Fusion Test Facility

Design of Multiregional Supervisory Fuzzy PID Control of pH Reactors

Directory of Open Access Journals (Sweden)

Shebel AlSabbah

2015-01-01

Full Text Available This work concerns designing multiregional supervisory fuzzy PID (Proportional-Integral-Derivative control for pH reactors. The proposed work focuses, mainly, on two themes. The first one is to propose a multiregional supervisory fuzzy-based cascade control structure. It would enable modifying dynamics and enhance system’s stability. The fuzzy system (master loop has been chosen as a tuner for PID controller (slave loop. It takes into consideration parameters uncertainties and reference tracking. The second theme concerns designing a hybrid neural network-based pH estimator. The proposed estimator would overcome the industrial drawbacks, that is, cost and size, found with conventional methods for pH measurement. The final end-user-interface (EUI front panel and the results that evaluate the performance of the supervisory fuzzy PID-based control system and hybrid NN-based estimator have been presented using the compatibility found between LabView and MatLab. They lead to conclude that the proposed algorithms are appropriate to systems nonlinearities encountered with pH reactors.

strategies for improving supervisory skills for effective primary ...

African Journals Online (AJOL)

Elizabeth

certain basic concepts such as inspection and supervision, the responsibility of supervisors, relevant areas in ... Strategies For Improving Supervisory Skills For Effective Primary Education In Nigeria. Enaigbe A. P. 236 ... book, attendance book etc. 6) Managerial Skills: These are skills on time management, good use.

The Relationship between Supervisee Stress, Coping Resources, the Working Alliance, and the Supervisory Working Alliance

Science.gov (United States)

Gnilka, Philip B.; Chang, Catherine Y.; Dew, Brian J.

2012-01-01

The authors examined the relationship of perceived stress, specific types of coping resources, the working alliance, and the supervisory working alliance among 232 counselor supervisees. The working alliance and the supervisory working alliance were negatively related to perceived stress and positively related to multiple coping resources. Two…

Development of a supervisory skills course for hospital pharmacy workplaces.

Science.gov (United States)

Woloschuk, Donna M M; Raymond, Colette B

2010-07-01

Many Canadian hospital pharmacies are experiencing difficulties recruiting supervisory personnel. It was expected that, through a "learning-by-doing" course, pharmacy staff would learn to apply basic skills in the day-to-day supervision of pharmacy operations and human resources and to apply the principles of supervisory documentation. A supervisory skills course targeted to pharmacy staff members was developed and implemented by the pharmacy department of a large urban health region. The course was initially offered to practising pharmacy technicians. The course design emphasized a constructivist framework incorporating authentic learning and reflective practice during seminars, with experiential and self-directed learning in the workplace. Preceptors assisted learners to achieve the course goals. Learners and preceptors provided feedback about hours spent (as the course progressed) and about their satisfaction with the course itself (at the end of the course). Learners and preceptors completed a post-program evaluation 2 months after completing the course to help in the assessment of the transfer of learning (lasting impact) associated with the course. Overall performance in the course was assessed on a pass/fail basis. Eighteen pharmacy technicians were admitted to the program, but one withdrew because of a job change. All learners successfully completed the course. Two months after the course, learners and preceptors described enhanced organization, time management, leadership, communication, and conflict-resolution skills on the part of learners, as well as their increased confidence, maturity, and ability to supervise staff. Learners' evaluations revealed a broadened perspective of pharmacy. The preceptors valued the enhancement of learners' skills and their increased enthusiasm. At the time of writing, 6 of the participants had secured supervisory positions. Creating formal instruction that engages pharmacy staff to pursue management positions is challenging

Building Supervisory Confidence--A Key to Transfer of Training

Science.gov (United States)

Byham, William C.; Robinson, James

1977-01-01

A training concept is described which suggests that efforts toward maintaining and/or building the confidence of the participants in supervisory training programs can increase their likelihood of using the skills on the job. (TA)

Independence and executive remuneration for supervisory board members and non-executive directors

Directory of Open Access Journals (Sweden)

Hana Horak

2011-01-01

Full Text Available In this paper, the author analyses the issues of independence and rewarding members of supervisory boards and non-executive directors in administrative boards. The question of independence was developed as one of the fundamental issues of corporative administration. Members of these organs of society should have the appropriate qualifications, specific knowledge and skills in order to reasonably and impartially weigh up social business and reach decisions in the best interests of society, its members and other interest holders. So that they can act in accordance with this, the presumption is that they are independent. Recently, after financial crises, it is precisely the independence of supervisory members, that is, non-executive directors, which is considered to be the foundation of the fight against the opportunism of administration and main shareholders. The authors analyse the Recommendations on Independence and Executive Remuneration for members of supervisory and administrative boards of the European Union, together with their implementation in Croatian law and practice.

Demarcation of the licensing and supervisory procedures for nuclear engineering installations

International Nuclear Information System (INIS)

Schattke, H.

1986-01-01

The remarks can be summed up under 12 points: 1) The protective purpose outlined in Paragraph 1 No. 2 of the Atomic Energy Law is the top priority for both licensing and regulatory authorities. 2) Both authorities must aim at the best possible prevention of hazards and precautions against risks. 3) The licensing procedures cover applications for licenses, the regulatory procedures check and supervise actual activities. 4) The licensing procedures take precedence in chronology and in substance over the regulatory procedure. 5) The licensing procedure is a preliminary check on the intention to carry out nuclear activities before the event; whereas the regulatory procedure controls the licensee after the event to ensure that the latter's activities really do conform to the framework laid down in the license. 6) The licensing procedure must be verified by state supervision with regard to its prognostic activity. 7) The examination criteria are largely identical for both the authorites. 8) The examination tools for the licensing and regulatory authorities also coincide to a large extent. Legal differences in the possible means of enforcement have no effect in practice. 9) Decisions made by either authority can be either in the licensee's favour or to its disadvantage. Nevertheless, the contents of decisions differ widely between the two authorities. 10) The regulatory authorities execute and prepare the decisions of the licensing authorites. 11) Licensing decisions can be designated static/prognostic, whereas regulatory measures accompany the actual performance of the plant and the operating personnel in a dynamic/controlling manner. 12) Regulatory instructions are usually of a temporary nature, whereas licensing actions are permanent as a rule. (orig.) [de

Comparative study of researcher community support and supervisory support among Finnish and Danish PhD-students

DEFF Research Database (Denmark)

Cornér, Solveig; Pyhältö, Kirsi; Peltonen, Jouni

Prior research on doctoral supervision and researcher communities has identified social support as a key determinant of the doctoral journey (Jairam & Kahl, 2012; Zhao, Golde & McCormick, 2007). Supervisory support, for instance, in terms of constructive feedback and encouragement (Pyhältö......, 313-329. • Pyhältö, K., Vekkaila (o.s. Tuomainen), J., & Keskinen, J. (2015). Fit matters in the supervisory relationship: Doctoral students’ and supervisors’ perceptions about supervisory activities. Innovations in Education and Teaching International, 52(1), 4-16. • Zhau, C-M, Golde, C.M., McCormick...

A Tool For Enhancing Supervisory Effectiveness In Nigerian ...

African Journals Online (AJOL)

This paper examined the relevance of Information and Communication Technology (ICT) as a tool for enhancing supervisory effectiveness in Nigerian educational institutions. The paper highlighted various tools of ICT that could be used in educational supervision such as Closed Circuit Television (CCTV) Cameras, e-mails ...

Influence of perceived co-worker involvement and supervisory ...

African Journals Online (AJOL)

This study investigated the influence of perceived co-worker involvement and Supervisory Support on Job Satisfaction among Staff of Champion Brewery, Uyo. One hundred and fifty (150) participants were drawn as participant using simple randomization. The participants were ninety five males and fifty five females whose ...

International Symposium on Monitoring Behavior and Supervisory Control

CERN Document Server

Johannsen, Gunnar

1976-01-01

This book includes all papers presented at the International Symposium on Monitoring Behavior and Supervisory Control held at Berchtesgaden, Federal Republic of Germany, March 8-12, 1976. The Symposium was sponsored by the Scientific Affairs Division of the North Atlantic Treaty Organization, Brussels, and the government of the Federal Republic of Germany, Bonn. We believe the book constitutes an important and timely status report on monitoring behavior and supervisory control by human operators of complex man-machine systems in which the computer is sharing key functions with the man. These systems include aircraft and other vehicles, nuclear and more conventional power plants, and processes for the manu­ facture of chemicals, petroleum, and discrete parts. By "monitoring" we mean the systematic observation by a human operator of mul tiple sources of information, e. g. , ranging from integrated display consoles to disparate "live situations". The monitor's purpose is to determine whether operations are norm...

An Adaptive Supervisory Sliding Fuzzy Cerebellar Model Articulation Controller for Sensorless Vector-Controlled Induction Motor Drive Systems

Directory of Open Access Journals (Sweden)

Shun-Yuan Wang

2015-03-01

Full Text Available This paper presents the implementation of an adaptive supervisory sliding fuzzy cerebellar model articulation controller (FCMAC in the speed sensorless vector control of an induction motor (IM drive system. The proposed adaptive supervisory sliding FCMAC comprised a supervisory controller, integral sliding surface, and an adaptive FCMAC. The integral sliding surface was employed to eliminate steady-state errors and enhance the responsiveness of the system. The adaptive FCMAC incorporated an FCMAC with a compensating controller to perform a desired control action. The proposed controller was derived using the Lyapunov approach, which guarantees learning-error convergence. The implementation of three intelligent control schemes—the adaptive supervisory sliding FCMAC, adaptive sliding FCMAC, and adaptive sliding CMAC—were experimentally investigated under various conditions in a realistic sensorless vector-controlled IM drive system. The root mean square error (RMSE was used as a performance index to evaluate the experimental results of each control scheme. The analysis results indicated that the proposed adaptive supervisory sliding FCMAC substantially improved the system performance compared with the other control schemes.

A distributed hierarchical architecture of expert systems for supervisory control of multimodular nuclear reactors

International Nuclear Information System (INIS)

Otaduy, P.J.; Brittain, C.R.; Rovere, L.A.; Gove, N.B.

1991-01-01

A hierarchical supervisory control architecture has being implemented at ORNL to coordinate the controllers of a multimodular nuclear plant. The supervisory controller form a network of distributed expert system interfaced with a real-time simulation of the plant, the plant's automatic controllers, and the human operator. The main goal of the supervisory controllers is to maintain the plant operating within safety envelopes while optimizing availability, minimizing stress to components and operators, and facilitating operations. Representative rules implementing strategies for situation dependent reassignment of process goals by embedding diagnostics into the control philosophy are discussed. It should noted that the control philosophies here described use the ALMR concept for illustration purposes and are not part of the official ALMR design at this time. 3 refs., 1 fig

Commerce Supervisory Course: Discussion Guide. Theories of Supervision.

Science.gov (United States)

McCaw, Edward A.

The contributions of Frederick W. Taylor, Henri Fayol and Elton Mayo to the development of current concepts of supervisory theory are outlined. Ten newer concepts of management, with graphics, provide the supervisor with an opportunity to formulate his own personal theory. Suggested bibliography for supervisors is given. (Author/NF)

Democratic Dialogue as a Process to Inform Public Policy: Reconceptualizing a Supervisory Officer’s Qualification Program

Directory of Open Access Journals (Sweden)

Deirdre M. Smith

2015-06-01

Full Text Available An exploration of the collaborative reconceptualization of a provincial Supervisory Officer’s Qualification Program (SOQP through the use of dialogic approaches is the focus of this inquiry. The stories, perspectives, and lived experiences of supervisory officers, principals, teachers, parents, students, and members of the public in Ontario were included as essential voices and information sources within policy development conversations. These narratives of experience revealed the forms of knowledge, skills, dispositions, and ethical commitments necessary for effective supervisory officers today and in the future. They also illustrated the transformative nature of narrative dialogue to enlighten, deepen understanding, and alter perspec- tives. The policy development processes used in this publicly shared educational initiative serve as a model of democratic dialogue. The inclusive and dialogic methods employed to collectively reconceptualize a supervisory officer formation program illustrate an innovative framework for developing policies governing the public good.

Autonomous Supervisory Engine for Multi-Spacecraft Formation Flying, Phase II

Data.gov (United States)

National Aeronautics and Space Administration — The overall goal of this project is to develop an onboard, autonomous Multi-spacecraft Supervisory Engine (MSE) for formation-flying guidance, navigation and control...

Supervisory control of (max,+) automata: extensions towards applications

Czech Academy of Sciences Publication Activity Database

Lahaye, S.; Komenda, Jan; Boimond, J.-L.

2015-01-01

Roč. 88, č. 12 (2015), s. 2523-2537 ISSN 0020-7179 Institutional support: RVO:67985840 Keywords : discrete event systems * logical and timed behaviors * (max,+) automata * supervisory control Subject RIV: BA - General Mathematics Impact factor: 1.880, year: 2015 http://www.tandfonline.com/doi/full/10.1080/00207179.2015.1048295

Supervisory control of (max,+) automata: extensions towards applications

Czech Academy of Sciences Publication Activity Database

Lahaye, S.; Komenda, Jan; Boimond, J.-L.

2015-01-01

Roč. 88, č. 12 (2015), s. 2523-2537 ISSN 0020-7179 Institutional support: RVO:67985840 Keywords : discrete event systems * logical and time d behaviors * (max,+) automata * supervisory control Subject RIV: BA - General Mathematics Impact factor: 1.880, year: 2015 http://www.tandfonline.com/doi/full/10.1080/00207179.2015.1048295

TEFL Graduate Supervisees' Views of Their Supervisors' Supervisory Styles and Satisfaction with Thesis Supervision

Science.gov (United States)

Gedamu, Abate Demissie

2018-01-01

Thesis supervisor supervisory styles play central roles in enhancing timely and quality completion of thesis works. To this effect, this study aimed at exploring TEFL graduate supervisees' perception of their thesis supervisors' supervisory style(s), the supervisees' level of satisfaction with thesis supervision, and the association between…

Supervisory Control of (max,+) automata: a behavioral approach

Czech Academy of Sciences Publication Activity Database

Komenda, Jan; Lahaye, S.; Boimond, J.-L.

2009-01-01

Roč. 19, č. 4 (2009), s. 525-549 ISSN 0924-6703 Grant - others:EU Projekt(XE) EU.ICT.DISC 224498 Institutional research plan: CEZ:AV0Z10190503 Keywords : timed discrete-event systems * supervisory control * formal power series * (max,+) * automata Subject RIV: BA - General Mathematics Impact factor: 0.921, year: 2009

Framework for modeling supervisory control behavior of operators of nuclear power plants

International Nuclear Information System (INIS)

Baron, S.; Feehrer, C.; Muralidharan, R.; Pew, R.; Horwitz, P.

1982-01-01

The importance of modeling the human-machine system has long been recognized, and many attempts have been made to estimate the operator's effect on system performance and reliability. The development of reliability models has been aimed at providing the means for exploring the physical consequences of specific classes of human error. However, the total impact of human performance on system operation and the adequacy of existing design and operating standards cannot be adequatly captured or assessed by simple error probabilities, or even by the combination of such probabilities. The behaviors of relevance are supervisory in nature, with a substantial cognitive component. The broad requirements for a model of human supervisory control are extensive and suggest that a highly sophisticated computer model will be needed. The purpose of this paper is to provide a brief overview of the approach employed in developing such supervisory control models; of some proposed specializations and extensions to adapt them for the nuclear power plant case; and of the potential utility of such a model

Instructional Supervisory Practices of Headteachers and Teacher Motivation in Public Basic Schools in Anomabo Education Circuit

Science.gov (United States)

Esia-Donkoh, Kweku; Baffoe, Stella

2018-01-01

The study examined the supervisory practices of headteachers and how these supervisory practices relate with teacher motivation in public basic schools in the Anomabo Education Circuit of the Mfantseman Municipality in the Central Region of Ghana. Quantitative approach of the cross-sectional survey design was adopted. Using purposive and…

Board of Directors or Supervisory Board

DEFF Research Database (Denmark)

Werlauff, Erik

2009-01-01

The article analyses the legal consequences of the choice now available to Danish public limited companies, which can now opt for a two-tier management structure, in which the management board undertakes both the day-to-day and the overall management, while a supervisory board exercises control...... over the management board, including its appointment and dismissal. The article considers which companies a two-tier structure may be relevant for, and reviews the consequences for the composition, election and functioning of the company organs....

Supervisory Presentation for Research, Information, Integration and Testing (SPRINT)

Science.gov (United States)

2015-03-29

in Microsoft Visual Studio and several third party developer libraries (See Figure 4). All distributed laboratory sites have similar hardware...Testing (SPRINT). 15. SUBJECT TERMS Supervisory Control, Multi-Modal Interfaces, Scalable Interfaces, Advanced Visualization , Augmented Symbology 16...23 Figure 9. Fusion Visual Framework Components

Promoting versatility in mentor teachers’ use of supervisory skills

NARCIS (Netherlands)

Crasborn, F.J.A.J.; Hennissen, P.P.M.; Korthagen, F.A.J.; Bergen, T.C.M.

2008-01-01

Mentor teachers need a versatile supervisory skills repertoire. Besides taking the prevalent role of daily advisor and instructor, mentor teachers should also be able to stimulate reflection in student teachers. Video recordings of 60 mentoring dialogues were analysed, both before and after a mentor

Promoting versatililty in mentor teachers' use of supervisory skills

NARCIS (Netherlands)

Dr. Paul Hennissen; Dr. F.J.A.J. Crasborn; Niels Brouwer; Theo Bergen; Fred Korthagen

2008-01-01

Mentor teachers need a versatile supervisory skills repertoire. Besides taking the prevalent role of daily advisor and instructor, mentor teachers should also be able to stimulate reflection in student teachers. Video recordings were analyzed of 60 mentoring dialogues, both before and after a mentor

Complexity of verifying nonblockingness in modular supervisory control

Czech Academy of Sciences Publication Activity Database

Masopust, Tomáš

2018-01-01

Roč. 63, č. 2 (2018), s. 602-607 ISSN 0018-9286 Institutional support: RVO:67985840 Keywords : nonblockingness * modular supervisory control * complexity Subject RIV: BA - General Mathematics OBOR OECD: Computer sciences, information science, bioinformathics (hardware development to be 2.2, social aspect to be 5.8) Impact factor: 4.270, year: 2016 http://ieeexplore.ieee.org/document/7979596/

Supervisory practices in the Open and Distance Learning (ODL ...

African Journals Online (AJOL)

Formal training that specifically focuses on the ODL environment is recommended. Bridging the generational gap of supervisors regarding the use of information technology in supervisory practices needs to be addressed. A virtual appreciative coaching and mentoring programme can be a solution for providing support to ...

Investigating mentor teachers’ use and acquisition of supervisory skills:

NARCIS (Netherlands)

Dr. Niels Brouwer; Dr. F.J.A.J. Crasborn; Dr. Paul Hennissen; Prof. dr. Fred Korthagen

2015-01-01

The quality of mentoring in teacher education is an essential component of a powerful learning environment for teachers. There is no single approach to mentoring that will work in the same way for every teacher in each context. Nevertheless, most mentor teachers hardly vary their supervisory

30 CFR 75.1713-5 - First-aid training program; retraining of supervisory employees; availability to all miners.

Science.gov (United States)

2010-07-01

... 30 Mineral Resources 1 2010-07-01 2010-07-01 false First-aid training program; retraining of...-UNDERGROUND COAL MINES Miscellaneous § 75.1713-5 First-aid training program; retraining of supervisory... shall conduct refresher first-aid training courses each calendar year for all selected supervisory...

Appreciation of the research supervisory relationship by postgraduate nursing students.

Science.gov (United States)

van Wyk, N C; Coetzee, I M; Havenga, Y; Heyns, T

2016-03-01

The quality of the relationship between postgraduate students and their supervisors often determines the progress of the students. Successful supervision according to students is associated with the expertise of the supervisors and their willingness to share their knowledge with their students. On the other hand, supervisors expect their students to be able to work independently to a large extent. Contradictory expectations of supervisors and postgraduate students can cause delays in the progress of students. The aim of this study was to explore and describe the aspects of the supervisory relationship that postgraduate students in nursing science at a selected university in South Africa appreciate. A qualitative research design with an appreciative inquiry approach was used and 18 students under the guidance of an independent facilitator provided the data during group interviews. Specific personal and professional qualities of the supervisors contribute to a valued supervisory relationship. Regarding personal qualities, the supervisors should show their understanding of the unique circumstances of the students in challenging times. Supervisors should also be expert researchers. The valued relationship refers to an open and trusting relationship between the students and the supervisors. The students' appreciation of the research supervisory relationship contributes to the understanding of the expectations of postgraduate students regarding the support that they need to become scholars in an academic discipline. There is a need for continuing professional development of supervisors to sensitize them about the expectations of the students. © 2015 International Council of Nurses.

Self-Leadership and Creativity Differences in Line and Supervisory Defense Acquisition Employees

National Research Council Canada - National Science Library

DiLiello, Trudy C; Houghton, Jeffery D

2007-01-01

.... More specifically, the study examined differences in self-leadership, creativity, and perceived organizational support for creativity between line and supervisory defense acquisition employees...

Health, supervisory support, and workplace culture in relation to work-family conflict and synergy.

Science.gov (United States)

Beutell, Nicholas J

2010-08-01

This research examined health, supervisory support, and workplace culture as predictors of work interfering with family, family interfering with work, and work-family synergy. The analysis of data from 2,796 respondents from the 2002 National Study of the Changing Workforce yielded significant relations among measures of mental health, self-rated health, supervisory support, and work-family culture with a focus on career concerns. Support was found for a measure of work-family synergy. Implications and directions for research are discussed.

Process theory for supervisory control of stochastic systems with data

NARCIS (Netherlands)

Markovski, J.

2012-01-01

We propose a process theory for supervisory control of stochastic nondeterministic plants with data-based observations. The Markovian process theory with data relies on the notion of Markovian partial bisimulation to capture controllability of stochastic nondeterministic systems. It presents a

Supervisory control of drilling of composite materials

Science.gov (United States)

Ozaki, Motoyoshi

Composite materials have attractive features, such as high ratios of strength-to-weight and stiffness-to-weight. However, they are easily damaged when they are machined. A typical damage is delamination, which can occur when fiber reinforced composite laminates are drilled. The objective of this research is to study the drilling processes of carbon fiber reinforced laminates, and to develop and test a supervisory control strategy for their delamination-free drilling. Characterization of thrust force and torque is achieved through constant feedrate drilling experiments. The average values of thrust force and torque during the full engagement of the drill are utilized to obtain the Shaw's equations' parameters. The thrust force profile just before exit is given special attention. The Hocheng-Dharan equations, which give conservative values of delamination at the entrance and at the exit, are modified to express the influence of one lamina thickness explicitly. They are utilized not only for the characterization of thrust force but also for the determination of the thrust force reference for force control. In the design of the controllers of thrust force and torque, both thrust force and torque are assumed to be proportional to FPHR (Feed Per Half Revolution). A discrete-time dynamic model is established for the case when the time interval for a half revolution of the drill is divided by the sampling time, and the model is extended to the case of general spindle speeds. PI controllers are designed for the dynamic models of thrust force and torque. Root-locus techniques are used in the analysis. The phases of the drilling process are introduced and the control strategy at each phase is explained. The supervisory controller chooses not only the best control strategy for each phase, but also the reference value and the controller gain that are suitable at each drill position. Drilling experiments are conducted to show the usefulness of the concepts introduced in this

Development of new supervisory system with ITV. ITV ni yoru kanshi system ni kansuru kenkyu

Energy Technology Data Exchange (ETDEWEB)

Shimonaga, S; Matsunaga, R; Ono, H [The Kyushu Electric Power Co. Inc., Fukuoka (Japan)

1994-02-28

This paper describes an automatic trespassing supervisory system with ITV and picture processing (PP). The paper details an integrated control system and automatic supervision. The system functions to automatically detect a trespassing by means of PP, transfers items of information collected by sensors to a remote control center, and records relevant data. The operation principle consists of measurement of change in two or more images of moving bodies with binary value at a certain interval, determination on acceptability of the moving bodies represented by human characteristics, and identification of a trespasser. The system consists of an automatic supervisory device using PP and an automatic patrolling and searching device by means of sensor measurements. The supervisory device has images outputted from ITV and VTR processed by PP, host computer, and HD, and linked to an indication mechanism. According to the result of a site test at wireless transmission station of Kyushu Electric Power Company, the difference between measurement values collected by the searching device and those by the supervisory device was [plus minus]3% or less (other than EG output current), which is a useful value for verification. Although the basic technique has been established, practical use of the system still has some problems including performance improvement in picture processing. 37 refs., 38 figs., 18 tabs.

Hospital ownership, decisions on supervisory board characteristics, and financial performance.

Science.gov (United States)

Kuntz, Ludwig; Pulm, Jannis; Wittland, Michael

2016-01-01

Dynamic and complex transformations in the hospital market increase the relevance of good corporate governance. However, hospital performance and the characteristics of supervisory boards differ depending on ownership. The question therefore arises whether hospital owners can influence performance by addressing supervisory board characteristics. The objective of this study is to explain differences in the financial performance of hospitals with regard to ownership by studying the size and composition of supervisory boards. The AMADEUS database was used to collect information on hospital financial performance in 2009 and 2010. Business and quality reports, hospital websites, and data from health insurer were used to obtain information on hospital and board characteristics. The resulting sample consisted of 175 German hospital corporations. We utilized ANOVA and regression analysis to test a mediation hypothesis that investigated whether decisions regarding board size and composition were associated with financial performance and could explain performance differences. Financial performance and board size and composition depend on ownership. An increase in board size and greater politician participation were negatively associated with all five tested measures of financial performance. Furthermore, an increase in physician participation was positively associated with one dimension of financial performance, whereas one negative relationship was identified for nurse and economist participation. For clerics, no associations were found. Decisions concerning board size and composition are important as they relate to hospital financial performance. We contribute to existing research by showing that, in addition to board size and physician participation, the participation of other professionals can also influence financial performance.

Supervisory Responsiveness and Employee Self-Perceived Status and Voice Behavior

NARCIS (Netherlands)

Janssen, Onne; Gao, Liping

2015-01-01

We investigated the role of employees' status appraisals within their work group in relation to their challenging-promotive voice behavior. We argued that fair and respectful treatment of their voice input by the authority figure of the group (i.e., supervisory responsiveness) enhances employees'

Supervisory Responsiveness and Employee Self-Perceived Status and Voice Behavior

NARCIS (Netherlands)

Janssen, Onne; Gao, Liping

We investigated the role of employees' status appraisals within their work group in relation to their challenging-promotive voice behavior. We argued that fair and respectful treatment of their voice input by the authority figure of the group (i.e., supervisory responsiveness) enhances employees'

Supervisory Adaptive Network-Based Fuzzy Inference System (SANFIS Design for Empirical Test of Mobile Robot

Directory of Open Access Journals (Sweden)

Yi-Jen Mon

2012-10-01

Full Text Available A supervisory Adaptive Network-based Fuzzy Inference System (SANFIS is proposed for the empirical control of a mobile robot. This controller includes an ANFIS controller and a supervisory controller. The ANFIS controller is off-line tuned by an adaptive fuzzy inference system, the supervisory controller is designed to compensate for the approximation error between the ANFIS controller and the ideal controller, and drive the trajectory of the system onto a specified surface (called the sliding surface or switching surface while maintaining the trajectory onto this switching surface continuously to guarantee the system stability. This SANFIS controller can achieve favourable empirical control performance of the mobile robot in the empirical tests of driving the mobile robot with a square path. Practical experimental results demonstrate that the proposed SANFIS can achieve better control performance than that achieved using an ANFIS controller for empirical control of the mobile robot.

Model-based design of supervisory controllers for baggage handling systems

NARCIS (Netherlands)

Swartjes, L.; van Beek, D.A.; Fokkink, W.J.; van Eekelen, J.A.W.M.

2017-01-01

The complexity of airport baggage handling systems in combination with the required high level of robustness makes designing supervisory controllers for these systems a challenging task. We show how a state of the art, formal, model-based design framework has been successfully used for model-based

An Exploration of Supervisory and Therapeutic Relationships and Client Outcomes

Science.gov (United States)

Bell, Hope; Hagedorn, W. Bryce; Robinson, E. H. Mike

2016-01-01

The authors explored the connection between the facilitative conditions present within the supervisory relationship, the therapeutic relationship, and client outcomes. A correlational research design was used with a sample of 55 counselors-in-training and 88 clients. Results indicated a significant positive relationship between the therapeutic…

Behavior coordination of mobile robotics using supervisory control of fuzzy discrete event systems.

Science.gov (United States)

Jayasiri, Awantha; Mann, George K I; Gosine, Raymond G

2011-10-01

In order to incorporate the uncertainty and impreciseness present in real-world event-driven asynchronous systems, fuzzy discrete event systems (DESs) (FDESs) have been proposed as an extension to crisp DESs. In this paper, first, we propose an extension to the supervisory control theory of FDES by redefining fuzzy controllable and uncontrollable events. The proposed supervisor is capable of enabling feasible uncontrollable and controllable events with different possibilities. Then, the extended supervisory control framework of FDES is employed to model and control several navigational tasks of a mobile robot using the behavior-based approach. The robot has limited sensory capabilities, and the navigations have been performed in several unmodeled environments. The reactive and deliberative behaviors of the mobile robotic system are weighted through fuzzy uncontrollable and controllable events, respectively. By employing the proposed supervisory controller, a command-fusion-type behavior coordination is achieved. The observability of fuzzy events is incorporated to represent the sensory imprecision. As a systematic analysis of the system, a fuzzy-state-based controllability measure is introduced. The approach is implemented in both simulation and real time. A performance evaluation is performed to quantitatively estimate the validity of the proposed approach over its counterparts.

Supervisory behaviour as a predictor of return to work in employees absent from work due to mental health problems

NARCIS (Netherlands)

Nieuwenhuijsen, K.; Verbeek, J.H.A.M.; Boer, A.G.E.M. de; Blonk, R.W.B.; Dijk, F.J.H. van

2004-01-01

Aims: To study supervisory behaviour as a predictive factor for return to work of employees absent due to mental health problems; and to explore the association between conditional factors and supervisory behaviour. Methods: Eighty five supervisors of employees were interviewed by telephone.

Supervisory control software for MFTF neutral beams

International Nuclear Information System (INIS)

Woodruff, J.P.

1981-01-01

We describe the software structures that control the operation of MFTF Sustaining Neutral Beam Power Supplies (SNBPS). These components of the Supervisory Control and Diagnostics System (SCDS) comprise ten distinct tasks that exist in the SCDS system environment. The codes total about 16,000 lines of commented Pascal code and occupy 240 kbytes of memory. The controls have been running since March 1981, and at this writing are being integrated to the Local Control System and to the power supply Pulse Power Module Controller

Single banking supervision and the single supervisory mechanism

Directory of Open Access Journals (Sweden)

Gheorghe, C. A.

2013-06-01

Full Text Available A resolution seems to have been found for the banking crisis. The first steps have been made towards the construction of the Economic and Monetary Union, steps involving the single supervision of banks, in order to avoid the discount of a new financial crisis on the expense of the EU state members. The Single Supervisory Mechanism – SSM is to become effective as of March 1, 2014, at the earliest.

Review of Supervisory Control and Data Acquisition (SCADA) Systems

Energy Technology Data Exchange (ETDEWEB)

Reva Nickelson; Briam Johnson; Ken Barnes

2004-01-01

A review using open source information was performed to obtain data related to Supervisory Control and Data Acquisition (SCADA) systems used to supervise and control domestic electric power generation, transmission, and distribution. This report provides the technical details for the types of systems used, system disposal, cyber and physical security measures, network connections, and a gap analysis of SCADA security holes.

Organizational and Supervisory Apology Effectiveness: Apology Giving in Work Settings

Science.gov (United States)

Bisel, Ryan S.; Messersmith, Amber S.

2012-01-01

We synthesize the interdisciplinary literature into a heuristic for crafting effective organizational and supervisory apologies (the OOPS four-component apology). In the first experiment, we demonstrate how an offense committed by an organization is perceived to be more egregious than an offense committed by a friend or supervisor. Furthermore,…

The role of supervisory controller synthesis in automatic control software development

NARCIS (Netherlands)

Baeten, J.C.M.; Markovski, J.

2015-01-01

We give an overview of a model-driven systems engineering approach for high-tech systems that relies on supervisory controller synthesis. The proposed framework has a process-theoretic foundation and supports extensions with quantitative features. We briefly discuss several industrial case studies

Two-objective on-line optimization of supervisory control strategy

Energy Technology Data Exchange (ETDEWEB)

Nassif, N.; Kajl, S.; Sabourin, R. [Ecole de Technologie Superieure, Montreal (Canada)

2004-09-01

The set points of supervisory control strategy are optimized with respect to energy use and thermal comfort for existing HVAC systems. The set point values of zone temperatures, supply duct static pressure, and supply air temperature are the problem variables, while energy use and thermal comfort are the objective functions. The HVAC system model includes all the individual component models developed and validated against the monitored data of an existing VAV system. It serves to calculate energy use during the optimization process, whereas the actual energy use is determined by using monitoring data and the appropriate validated component models. A comparison, done for one summer week, of actual and optimal energy use shows that the on-line implementation of a genetic algorithm optimization program to determine the optimal set points of supervisory control strategy could save energy by 19.5%, while satisfying the minimum zone airflow rates and the thermal comfort. The results also indicate that the application of the two-objective optimization problem can help control daily energy use or daily building thermal comfort, thus saving more energy than the application of the one-objective optimization problem. (Author)

Prüfungen zur Beurteilung der Brandgefahr; Anleitung für die Aufstellung von Anforderungen und Prüfbestimmungen zur Beurteilung der Brandgefahr von elektrotechnischen Erzeugnissen; 1-2: Anleitung für Bauelemente der Elektronik; Identisch mit IEC 60695-1-2, Ausgabe 1982

CERN Document Server

Deutsches Institut für Normung. Berlin

1986-01-01

Prüfungen zur Beurteilung der Brandgefahr; Anleitung für die Aufstellung von Anforderungen und Prüfbestimmungen zur Beurteilung der Brandgefahr von elektrotechnischen Erzeugnissen; 1-2: Anleitung für Bauelemente der Elektronik; Identisch mit IEC 60695-1-2, Ausgabe 1982

Auditory decision aiding in supervisory control of multiple unmanned aerial vehicles.

Science.gov (United States)

Donmez, Birsen; Cummings, M L; Graham, Hudson D

2009-10-01

This article is an investigation of the effectiveness of sonifications, which are continuous auditory alerts mapped to the state of a monitored task, in supporting unmanned aerial vehicle (UAV) supervisory control. UAV supervisory control requires monitoring a UAV across multiple tasks (e.g., course maintenance) via a predominantly visual display, which currently is supported with discrete auditory alerts. Sonification has been shown to enhance monitoring performance in domains such as anesthesiology by allowing an operator to immediately determine an entity's (e.g., patient) current and projected states, and is a promising alternative to discrete alerts in UAV control. However, minimal research compares sonification to discrete alerts, and no research assesses the effectiveness of sonification for monitoring multiple entities (e.g., multiple UAVs). The authors conducted an experiment with 39 military personnel, using a simulated setup. Participants controlled single and multiple UAVs and received sonifications or discrete alerts based on UAV course deviations and late target arrivals. Regardless of the number of UAVs supervised, the course deviation sonification resulted in reactions to course deviations that were 1.9 s faster, a 19% enhancement, compared with discrete alerts. However, course deviation sonifications interfered with the effectiveness of discrete late arrival alerts in general and with operator responses to late arrivals when supervising multiple vehicles. Sonifications can outperform discrete alerts when designed to aid operators to predict future states of monitored tasks. However, sonifications may mask other auditory alerts and interfere with other monitoring tasks that require divided attention. This research has implications for supervisory control display design.

A Review of the Literature on Professional Doctorate Supervisory Styles

Science.gov (United States)

Johansson, Carol; Yerrabati, Sridevi

2017-01-01

At the core of doctoral education is the importance of the quality of the supervisor and student relationship. Research has shown that this relationship is directly linked to completion rates, and impacts the quality of the doctorate and its ultimate success or failure (Gill and Burnard, 2008). One influence on the supervisory relationship is the…

Discrete Event Supervisory Control Applied to Propulsion Systems

Science.gov (United States)

Litt, Jonathan S.; Shah, Neerav

2005-01-01

The theory of discrete event supervisory (DES) control was applied to the optimal control of a twin-engine aircraft propulsion system and demonstrated in a simulation. The supervisory control, which is implemented as a finite-state automaton, oversees the behavior of a system and manages it in such a way that it maximizes a performance criterion, similar to a traditional optimal control problem. DES controllers can be nested such that a high-level controller supervises multiple lower level controllers. This structure can be expanded to control huge, complex systems, providing optimal performance and increasing autonomy with each additional level. The DES control strategy for propulsion systems was validated using a distributed testbed consisting of multiple computers--each representing a module of the overall propulsion system--to simulate real-time hardware-in-the-loop testing. In the first experiment, DES control was applied to the operation of a nonlinear simulation of a turbofan engine (running in closed loop using its own feedback controller) to minimize engine structural damage caused by a combination of thermal and structural loads. This enables increased on-wing time for the engine through better management of the engine-component life usage. Thus, the engine-level DES acts as a life-extending controller through its interaction with and manipulation of the engine s operation.

Improving The Average Session Evaluation Score Of Supervisory Programby Using PDCA Cycle At PT XYZ

Directory of Open Access Journals (Sweden)

Jonny Jonny

2016-09-01

Full Text Available PT XYZ took People Development tasks as important things in order to provide great leaders for handling its business operations. It had several leadership programs such as basic management program, supervisory program, managerial program, senior management program, general management program, and the executive program. For basic management and supervisory programs, PT XYZ had appointed ABC division to solely handled them, while the rest, ABC division should cooperate with other training providers who were reputable in leadership ones. The aim of this study was to ensure that the appropriate leadership style has been delivered accordingly to the guideline to the employees by ABC division to improve the average session evaluation score of the supervisory program by using PDCA (Plan, Do, Check, and Action cycle. The method of this research was by gathering quantitative and qualitative data by using session and program evaluation format to see current condition. The research finds that the reasons why the program is below target 4,10 score. It is related to the new facilitator, no framework, and teaching aids. 

Decision support in supervisory control

International Nuclear Information System (INIS)

Rasmussen, J.; Goodstein, L.P.

1985-08-01

It is argued that the supervisory control of complex industrial processes having a potential for serious consequences in case of accidents requires careful consideration of the allocation of decision making between the three main agents of control; namely the designer, the operator and the automatic control system. In particular, it is advocated that instead of continuing their efforts to make their preplanning of responses and countermeasures more and more complete and restricting the operator's initiative, designers should take advantage of modern information technology to make available to the operators their conceptual models and their processing resources so as to allow the operators to function as their extended arm in coping with the plant. Such an interactive decision making activity would thus benefit from this simultaneous availability of the design basis, up-to-date knowledge of plant status and accumualted operational experience. (author)

Quality of energy consultancy services - Requirements, criteria for evaluation, and a case report; Energieberatungsqualitaet - Anforderungen, Messung und ein Fallbeispiel

Energy Technology Data Exchange (ETDEWEB)

Hausser, K.

1999-07-01

The article initially pictures an optimized model of energy consultancy and continues with explaining an instrument available for quality assessment of services in general, (SERVQUAL), presenting approaches for modifying this tool so as to make it applicable to evaluating the quality of energy consultancy activities. Finally, the capabilities of the modified tool are discussed referring to a case study in an electric utility, the Neckarwerke Stuttgart. (orig./CB) [German] Energieberatung durch Energieversorgungsunternehmen wird in Deutschland fast flaechendeckend angeboten. Im Beitrag wird zuerst aufgezeigt, welche Anforderungen eine optimale Energieberatung erfuellen muss. Danach wird ein Instrument vorgestellt, das die Qualitaet von Dienstleistungen im allgemeinen misst und im Rahmen der o.g. Arbeit so weiterentwickelt wurde, dass es von nun an auch als Instrument zur Messung der Qualitaet von Energieberatung im Besonderen dienen kann: SERVQUAL (von SERVice QUALity). Zuletzt werden die Ergebnisse praesentiert, die in der o.g. Untersuchung unter Anwendung von SERVQUAL bei den Neckarwerken Stuttgart erzielt wurden. (orig./RHM)

Distributed Supervisory Protection Interlock System

International Nuclear Information System (INIS)

Walz, H.V.; Agostini, R.C.; Barker, L.; Cherkassky, R.; Constant, T.; Matheson, R.

1989-03-01

The Distributed Supervisory Protection Interlock System, DSPI, is under development at the Stanford Linear Accelerator Center for requirements in the areas of personnel protection, beam containment and equipment protection interlocks. The DSPI system, distributed over the application site, consists of segments with microprocessor-based controller and I/O modules, local area networks for communication, and a global supervisor computer. Segments are implemented with commercially available controller and I/O modules arranged in local interlock clusters, and associated software. Segments provide local interlock data acquisition, processing and control. Local area networks provide the communication backbone between segments and a global supervisor processor. The supervisor processor monitors the overall system, reports detail status and provides human interfaces. Details of an R and D test system, which will implement the requirements for personnel protection of 4 typical linear accelerator sectors, will be described. 4 refs., 2 figs

5 CFR 6801.107 - Disqualification of supervisory employees from matters involving lenders.

Science.gov (United States)

2010-01-01

... indebtedness is current and the indebtedness is on terms and conditions offered to the public: (i) Credit extended through the use of a credit card; (ii) Credit extended through use of an overdraft protection line...—(1) Consumer credit on nonpreferential terms. Disqualification of a supervisory employee is not...

Supervisory arrangements, LOLR and crisis management in a single European banking market

NARCIS (Netherlands)

Boot, A.W.A.

2006-01-01

In this paper I discuss some key issues related to supervisory arrangements in the EMU countries, and particularly those relating to the LOLR structure and crisis management. The focus will be on the responsibilities and powers of individual countries (and national central banks) vis-à-vis those at

Social Support and Supervisory Quality Interventions in the Workplace: A Stakeholder-Centered Best-Evidence Synthesis of Systematic Reviews on Work Outcomes

Directory of Open Access Journals (Sweden)

SL Wagner

2015-10-01

Full Text Available Background: There is controversy surrounding the impact of workplace interventions aimed at improving social support and supervisory quality on absenteeism, productivity and financial outcomes. Objective: To determine the value of social support interventions for work outcomes. Methods: Databases were searched for systematic reviews between 2000 and 2012 to complete a synthesis of systematic reviews guided by the PRISMA statement and the IOM guidelines for systematic reviews. Assessment of articles for inclusion and methodological quality was conducted independently by at least two researchers, with differences resolved by consensus. Results: The search resulted in 3363 titles of which 3248 were excluded following title/abstract review, leaving 115 articles that were retrieved and underwent full article review. 10 articles met the set inclusion criteria, with 7 focusing on social support, 2 on supervisory quality and 1 on both. We found moderate and limited evidence, respectively, that social support and supervisory quality interventions positively impact workplace outcomes. Conclusion: There is moderate evidence that social support and limited evidence that supervisory quality interventions have a positive effect on work outcomes.

Social Support and Supervisory Quality Interventions in the Workplace: A Stakeholder-Centered Best-Evidence Synthesis of Systematic Reviews on Work Outcomes.

Science.gov (United States)

Wagner, S L; White, M I; Schultz, I Z; Williams-Whitt, K; Koehn, C; Dionne, C E; Koehoorn, M; Harder, H G; Pasca, R; Wärje, O; Hsu, V; McGuire, L; Lama, I; Schulz, W; Kube, D; Wright, M D

2015-10-01

There is controversy surrounding the impact of workplace interventions aimed at improving social support and supervisory quality on absenteeism, productivity and financial outcomes. To determine the value of social support interventions for work outcomes. Databases were searched for systematic reviews between 2000 and 2012 to complete a synthesis of systematic reviews guided by the PRISMA statement and the IOM guidelines for systematic reviews. Assessment of articles for inclusion and methodological quality was conducted independently by at least two researchers, with differences resolved by consensus. The search resulted in 3363 titles of which 3248 were excluded following title/abstract review, leaving 115 articles that were retrieved and underwent full article review. 10 articles met the set inclusion criteria, with 7 focusing on social support, 2 on supervisory quality and 1 on both. We found moderate and limited evidence, respectively, that social support and supervisory quality interventions positively impact workplace outcomes. There is moderate evidence that social support and limited evidence that supervisory quality interventions have a positive effect on work outcomes.

Shifts in Competences between Member States and EU in the New Supervisory System for Credit Institutions and their Consequences for Judicial Protection

NARCIS (Netherlands)

Wissink, L.; Duijkersloot, Ton; Widdershoven, Rob

2014-01-01

well as powers concerning enforcement – investigations, measures and penalties – to the EU level. One striking example of such a transfer is the new supervisory system for credit institutions that has recently been put into effect, the so-called Single Supervisory Mechanism (SSM).1 Under the new

The elephant in the room: Dialogues about race within cross-cultural supervisory relationships.

Science.gov (United States)

White-Davis, Tanya; Stein, Emma; Karasz, Alison

2016-05-01

For centuries, the concept of race, a uniquely pervasive social construct, has often complicated dialogue and interactions between groups of people. This study assessed perceptions and attitudes of faculty and trainees with varied racial backgrounds within graduate medical and psychology programs. Self-reported responses addressed potential barriers and facilitating factors required for meaningful conversations about race. A brief 18-question survey was developed and administered electronically to three professional and academic Listservs within a large metropolitan city in northeast United States. Quantitative and qualitative analysis were conducted using SPSS Statistical Software and Text analyzer. Results revealed that among participants (N = 57) a majority experienced cross-racial supervision, and more than half indicated engaging in conversations about race within supervision. Respondents endorsed lack of comfort and lack of opportunity/time as significant barriers to discussing race within supervision. When race-related dialogues occurred, a majority of supervisees and supervisors found it beneficial. Most Supervisors of Color(a) actively initiated these conversations in supervision, while White supervisees endorsed the least benefit from these conversations. Contrary to our expectations, few respondents endorsed limited training as a barrier. The current study revealed cross-racial dialogues about race may be occurring frequently in supervisory relationships. Supervisees of Color reported benefiting from these dialogues, in contrast to their White counterparts, who endorsed the least benefit. Lack of comfort in supervisory relationships appears to be a significant barrier to having these conversations. Therefore, it is important for supervisors to create supervisory relationships emphasizing safety and comfort. Directions for future research are discussed. © The Author(s) 2016.

The driver in the 21st century. Demands, applications, aspects of man-machine systems. Lectures; Der Fahrer im 21. Jahrhundert. Anforderungen, Anwendungen, Aspekte fuer Mensch-Maschine-Systeme. Plenarvortraege

Energy Technology Data Exchange (ETDEWEB)

NONE

2003-07-01

A high grade of mobility is the basis of our economic development. The innovations in the automotive- and deliver industry lead to different fulfillments of customer expectations on vehicle operation. Also in the railway sector increasing requirements on the operators involve a change of view within design of man-machine interfaces. The transmission of information and transfer of reactions require advanced and balanced concepts for operating and monitoring of modern automobiles. The integral connection of competence in technology, design and ergonomics, sense- and traffic psychology as well as legal problems lead to new challenges and possibilities. (GL) [German] Der Fahrer im 21. Jahrhundert - Anforderungen, Anwendungen, Aspekte fuer Mensch-Maschine-Systeme - unter diesem Motto wird die interessante Fachtagung ''Der Fahrer im 21. Jahrhundert'' fortgefuehrt. Ein hohes Mass an Mobilitaet ist Grundlage unserer wirtschaftlichen Entwicklung. Die Innovationen in der Automobil- und Zuliefererindustrie fuehren zu einer differenzierten Erfuellung der Kundenerwartungen an die Bedienung der Fahrzeuge. Auch im Bereich Bahn bedingen die steigenden Anforderungen an die Fahrzeugfuehrer ein Umdenken bei der Gestaltung der Mensch-Maschine-Schnittstelle. Die Vermittlung von Informationen und die Umsetzung adaequater Reaktionen erfordern neue und ausgewogene Konzepte fuer das Bedienen und Beobachten moderner Fahrzeuge. Die integrale Verbindung von Kompetenz in Technologie, Design und Ergonomie, Wahrnehmungs- und Verkehrspsychologie sowie rechtlichen Fragestellungen fuehren hier zu neuen Herausforderungen und Moeglichkeiten. Die Tagung moechte wieder visionaere Loesungsansaetze aufzeigen und auch das Machbare diskutieren. Nutzen Sie die Gelegenheit, mit namhaften Referenten aus Industrie und Wissenschaft, Fach- und Fuehrungskraeften zu sprechen und auf dieser Veranstaltung neue Bedien- und Informationskonzepte, Teilloesungen fuer die unterschiedlichen Fahraufgaben

Supervisory control system implemented in programmable logical controller web server

OpenAIRE

Milavec, Simon

2012-01-01

In this thesis, we study the feasibility of supervisory control and data acquisition (SCADA) system realisation in a web server of a programmable logic controller. With the introduction of Ethernet protocol to the area of process control, the more powerful programmable logic controllers obtained integrated web servers. The web server of a programmable logic controller, produced by Siemens, will also be described in this thesis. Firstly, the software and the hardware equipment used for real...

Supervisory support in Slovenian and Dutch organizations: a contextualizing approach

OpenAIRE

Dulk, Laura; Peper, Bram; Kanjuo Mrčela, Aleksandra; Ignjatović, Miroljub

2016-01-01

textabstractThis paper builds on the influential work of Suzan Lewis examining how employees’ work–life experiences are shaped by different layers of context. Our approach is therefore a comparative one using data from four organizational contexts in two countries, the Netherlands and Slovenia. Within each organization, we examine the role of different types of supervisory support (specific family support and general support) and the quality of the relationship between supervisor and subordin...

Supervisory Control and Data Acquisition Laboratory

Directory of Open Access Journals (Sweden)

M. Iacob

2010-06-01

Full Text Available This paper presents practical laboratories for teaching purpose in Supervisory Control and Data Acquisition (SCADA systems. A SCADA system is described in terms of architecture, process interfaces, functionality, and application development facilities. These concepts are implemented on an integrated automation system, particularly for digital control of electric drives with a distributed peripheral, i.e., Totally Integrated Automation with Democase from Siemens. Using this system, a wide range of applications can be designed, implemented and tested. A practical labs set is presented to introduce gradually the main SCADA elements, and finally to develop an application to control an induction motor in interlocked manual/automatic mode, with touch-screen Human Machine Interface (HMI. The system employs industrial busses like PROFIBus and industrial Ethernet. The SCADA system also shows trends, alarms, motor frequency and automatic sequence of motor speed profile.

Application of human error theory in case analysis of wrong procedures.

Science.gov (United States)

Duthie, Elizabeth A

2010-06-01

The goal of this study was to contribute to the emerging body of literature about the role of human behaviors and cognitive processes in the commission of wrong procedures. Case analysis of 5 wrong procedures in operative and nonoperative settings using James Reason's human error theory was performed. The case analysis showed that cognitive underspecification, cognitive flips, automode processing, and skill-based errors were contributory to wrong procedures. Wrong-site procedures accounted for the preponderance of the cases. Front-line supervisory staff used corrective actions that focused on the performance of the individual without taking into account cognitive factors. System fixes using human cognition concepts have a greater chance of achieving sustainable safety outcomes than those that are based on the traditional approach of counseling, education, and disciplinary action for staff.

12 CFR 715.7 - Supervisory Committee audit alternatives to a financial statement audit.

Science.gov (United States)

2010-01-01

... financial statement audit. 715.7 Section 715.7 Banks and Banking NATIONAL CREDIT UNION ADMINISTRATION... Committee audit alternatives to a financial statement audit. A credit union which is not required to obtain a financial statement audit may fulfill its supervisory committee responsibility by any one of the...

National Ignition Facility subsystem design requirements supervisory control software SSDR 1.5.2

International Nuclear Information System (INIS)

Woodruff, J.; VanArsdall, P.; Bliss, E.

1996-01-01

This System Design Requirement document establishes the performance, design, development, and test requirements for the Supervisory Control Software, WBS 1.5.2, which is part of the NIF Integrated Computer Control System (ICCS). This document responds directly to the requirements detailed in ICCS (WBS 1-5)

Building Effective Supervisory Relationships in the Online Counseling Course: Faculty and Student Responsibilities

Science.gov (United States)

Cicco, Gina

2014-01-01

This article will provide an outline for counselor educators and their students on how to develop and maintain solid supervisory relationships in the online classroom. Counselors-in-training are required to complete practicum and internship experiences during their graduate academic preparation. These field experience courses typically involve 100…

Management and non-supervisory perceptions surrounding the implementation and significance of high-performance work practices in a nuclear power plant

Science.gov (United States)

Ashbridge, Gayle Ann

Change management has become an imperative for organizations as they move into the 21st century; up to 75 percent of change initiatives fail. Nuclear power plants face the same challenges as industrial firms with the added challenge of deregulation. Faced with this challenge, restructuring the electric utility has raised a number of complex issues. Under traditional cost-of-service regulation, electric utilities were able to pass on their costs to consumers who absorbed them. In the new competitive environment, customers will now choose their suppliers based on the most competitive price. The purpose of this study is to determine the degree of congruence between non-supervisory and supervisory personnel regarding the perceived implementation of high performance workplace practices at a nuclear power plant. This study used as its foundation the practices identified in the Road to High Performance Workplaces: A Guide to Better Jobs and Better Business Results by the U.S. Department of Labor's Office of the American Workplace (1994). The population for this study consisted of organizational members at one nuclear power plant. Over 300 individuals completed surveys on high performance workplace practices. Two surveys were administered, one to non-supervisory personnel and one to first line supervisors and above. The determination of implementation levels was accomplished through descriptive statistical analysis. Results of the study revealed 32 areas of noncongruence between non-supervisory and supervisory personnel in regard to the perceived implementation level of the high performance workplace practices. Factor analysis further revealed that the order in which the respondents place emphasis on the variables varies between the two groups. This study provides recommendations that may improve the nuclear power plants alignment of activities. Recommendations are also provided for additional research on high-performance work practices.

Operational Performance Risk Assessment in Support of A Supervisory Control System

Energy Technology Data Exchange (ETDEWEB)

Denning, Richard S. [Self Employed; Muhlheim, Michael David [ORNL; Cetiner, Sacit M. [ORNL; Guler Yigitoglu, Askin [ORNL

2017-06-01

Supervisory control system (SCS) is developed for multi-unit advanced small modular reactors to minimize human interventions in both normal and abnormal operations. In SCS, control action decisions made based on probabilistic risk assessment approach via Event Trees/Fault Trees. Although traditional PRA tools are implemented, their scope is extended to normal operations and application is reversed; success of non-safety related system instead failure of safety systems this extended PRA approach called as operational performance risk assessment (OPRA). OPRA helps to identify success paths, combination of control actions for transients and to quantify these success paths to provide possible actions without activating plant protection system. In this paper, a case study of the OPRA in supervisory control system is demonstrated within the context of the ALMR PRISM design, specifically power conversion system. The scenario investigated involved a condition that the feed water control valve is observed to be drifting to the closed position. Alternative plant configurations were identified via OPRA that would allow the plant to continue to operate at full or reduced power. Dynamic analyses were performed with a thermal-hydraulic model of the ALMR PRISM system using Modelica to evaluate remained safety margins. Successful recovery paths for the selected scenario are identified and quantified via SCS.

Supervisory control of mobile sensor networks: math formulation, simulation, and implementation.

Science.gov (United States)

Giordano, Vincenzo; Ballal, Prasanna; Lewis, Frank; Turchiano, Biagio; Zhang, Jing Bing

2006-08-01

This paper uses a novel discrete-event controller (DEC) for the coordination of cooperating heterogeneous wireless sensor networks (WSNs) containing both unattended ground sensors (UGSs) and mobile sensor robots. The DEC sequences the most suitable tasks for each agent and assigns sensor resources according to the current perception of the environment. A matrix formulation makes this DEC particularly useful for WSN, where missions change and sensor agents may be added or may fail. WSN have peculiarities that complicate their supervisory control. Therefore, this paper introduces several new tools for DEC design and operation, including methods for generating the required supervisory matrices based on mission planning, methods for modifying the matrices in the event of failed nodes, or nodes entering the network, and a novel dynamic priority assignment weighting approach for selecting the most appropriate and useful sensors for a given mission task. The resulting DEC represents a complete dynamical description of the WSN system, which allows a fast programming of deployable WSN, a computer simulation analysis, and an efficient implementation. The DEC is actually implemented on an experimental wireless-sensor-network prototyping system. Both simulation and experimental results are presented to show the effectiveness and versatility of the developed control architecture.

Supervisory control for a complex robotic system

International Nuclear Information System (INIS)

Miller, D.J.

1988-01-01

The Robotic Radiation Survey and Analysis System investigates the use of advanced robotic technology for performing remote radiation surveys on nuclear waste shipping casks. Robotic systems have the potential for reducing personnel exposure to radiation and providing fast reliable throughput at future repository sites. A primary technology issue is the integrated control of distributed specialized hardware through a modular supervisory software system. Automated programming of robot trajectories based upon mathematical models of the cask and robot coupled with sensory feedback enables flexible operation of a commercial gantry robot with the reliability needed to perform autonomous operations in a hazardous environment. Complexity is managed using structured software engineering techniques resulting in the generation of reusable command primitives which contribute to a software parts catalog for a generalized robot programming language

Technological requirements on refrigeration as seen by a frozen menu manufacturer; Technologische Anforderungen an die Kaeltetechnik aus der Sicht eines Tiefkuehl-Menue-Herstellers

Energy Technology Data Exchange (ETDEWEB)

Konietzko, M. [Apetito AG, Rheine (Germany)

1995-12-31

The present paper examines hour refrigeration in future will need to contribute to production pactices of frozen food manufacturers. This is exemplified for the practical everyday use of a froster. The paper also points out the limitations of present-day frozen menu manufacture. Finally, it discusses future demands on refrigeration regarding ecology and economy. Optimization tasks for the future are to increase freezing speed and render it controllable and to improve capacity control. (HW) [Deutsch] Es wird der Beitrag untersucht, den die Kaeltetechnik in der Produktionspraxis eines TK-Menue-Herstellers in Zukunft leisten muss. Hierzu werden der praktische, taegliche Einsatz am Beispiel eines TK-Frosters dargestellt. Ferner werden die heutigen Grenzen einer TK-Menue-Herstellung aufgezeigt. Abschliessend werden zukuenftige Anforderungen an die Kaeltetechnik unter den Aspekten Oekologie und Oekonomie beleuchtet. Zukuenftige Optimierungsansaetze liegen in einer besseren und angepassten Gefriergeschwindigkeit sowie in einer besser regulierbaren Leistung. (HW)

Supervisory training: From self awareness to leadership skills

International Nuclear Information System (INIS)

Kelly, M.

1991-01-01

This presentation will trace the development of the New York Power Authority's three-phase first line supervisory training curriculum. In twenty-two days of classroom training, this program follows our new supervisors though their first two years on the job. The objectives of this presentation are to: share the ups and downs experienced during the three years it took to design and fully implement the program; describe the rationale for, and content of, each of the program's three phases; and describe the corporate impact of the training, including the unexpected demand by higher level staff for similar comprehensive management development programs. Topics covered will include management support, needs assessment, program design and evolution, and training impact

Counseling and the Bystander-Equity Model of Supervisory Helping Behavior: Directions for EAP Research.

Science.gov (United States)

Gerstein, Lawrence H.; Bayer, Gregory A.

1991-01-01

Discusses contribution of Bystander-Equity Model of Supervisory Helping Behavior to pursuit of employee assistance program (EAP) research based on traditions of field of counseling. Offers structure for pursuing empirical and applied activities in EAP settings. Encourages counseling researchers and practitioners to respond to challenge of working…

The Davros III supervisory control system

International Nuclear Information System (INIS)

Rice, P.

1996-01-01

Magnox Electric's Remote Operations Branch deploy a wide variety of remote inspection and maintenance tools into nuclear plant in order to perform a variety of tasks. In recent years much progress has been made on low-level control of individual manipulator axes, and a parallel need has emerged for a supervisory system to assist the operator in the control of the whole system. Some requirements are: 1) to improve operator control of systems; 2) to simplify software maintenance and version control; 3) to reduce the likelihood of damage to manipulators; 4) to assist with rehearsals and simulations. Davros III is a PC software system which has been developed over a number of years to address these requirements. In a single program capable of being configured for a wide variety of applications, it provides a technique for following pretaught routes, a comprehensive and fully configurable interlock system and several different facilities for simulation. (author)

The Davros III supervisory control system

International Nuclear Information System (INIS)

Rice, P.

1996-01-01

Magnox Electric's Remote Operations Bbranch deploy a wide variety of remote inspection and maintenance tools into nuclear plant in order to perform a variety of tasks. In recent years much progress has been made on low-level control of individual manipulator axes and a parallel need has emerged for a supervisory system to assist the operator in the control of the whole system. Some requirements are: 1, To improve operator control of systems. 2, To simplify software maintenance and version control. 3, To reduce the likelihood of damage to manipulators. 4, To assist with rehearsals and simulations. Davros III is a PC software system which has been developed over a number of years to address these requirements. In a single program capable of being configured for a wide variety of applications, it provides a technique for following pretaught routes, a comprehensive and fully configurable interlock system and several different facilities for simulation. (author)

Ownership balance, supervisory efficiency of independent directors and the quality of management earnings forecasts

Directory of Open Access Journals (Sweden)

Yunling Song

2013-06-01

Full Text Available In the Chinese securities market, with its characteristics of influence through personal relationships (Guanxi and underdeveloped standards of law and enforcement, can independent directors play the supervisory role expected by securities regulators? In this study we use the degree of precision and accuracy in corporate earnings forecasts as proxies for the quality of information disclosure by listed companies and examine the supervisory efficiency of independent directors with respect to information disclosure. Using data from 2007 to 2009, we find that in the absence of ownership balance, independent directors have a significant positive effect on the accuracy of management forecasts. In addition, the personal backgrounds of independent directors have specific effects on management earnings forecasts. Directors with certified public accountant (CPA expertise significantly improve the precision of management forecasts. However, directors with industrial expertise significantly reduce the precision of management forecasts. In other words, having directors with CPA expertise improves the independence of boards, but having independent directors with industrial expertise has the opposite effect.

Judicial facts on licensing and supervisory procedures concerning radiation protection law

International Nuclear Information System (INIS)

Rosenhaum, O.

1976-01-01

Some statistical studies on the present licensing and supervision procedures are discussed, viz. on 1) owner of a licence accord. to sect. 3 and 4 of the 1st Radiation Protection Ordinance; 2) special licences according to section 1 of the Radiation Protection Ordinance for the release of radioactive materials in air and water (required in a very few cases only); 3) violations of the regulations were not of a severe nature (mostly from industry). The author condludes that the present regulations proved to be satisfactory. Minor corrections relating to licence-free handling, restriction of the requirements for a licence as well as to prohibition of illegal use of the radiation warning sign are desired. (HP) [de

Developing operator capacity estimates for supervisory control of autonomous vehicles.

Science.gov (United States)

Cummings, M L; Guerlain, Stephanie

2007-02-01

This study examined operators' capacity to successfully reallocate highly autonomous in-flight missiles to time-sensitive targets while performing secondary tasks of varying complexity. Regardless of the level of autonomy for unmanned systems, humans will be necessarily involved in the mission planning, higher level operation, and contingency interventions, otherwise known as human supervisory control. As a result, more research is needed that addresses the impact of dynamic decision support systems that support rapid planning and replanning in time-pressured scenarios, particularly on operator workload. A dual screen simulation that allows a single operator the ability to monitor and control 8, 12, or 16 missiles through high level replanning was tested on 42 U.S. Navy personnel. The most significant finding was that when attempting to control 16 missiles, participants' performance on three separate objective performance metrics and their situation awareness were significantly degraded. These results mirror studies of air traffic control that demonstrate a similar decline in performance for controllers managing 17 aircraft as compared with those managing only 10 to 11 aircraft. Moreover, the results suggest that a 70% utilization (percentage busy time) score is a valid threshold for predicting significant performance decay and could be a generalizable metric that can aid in manning predictions. This research is relevant to human supervisory control of networked military and commercial unmanned vehicles in the air, on the ground, and on and under the water.

Development and psychometric testing of the Supportive Supervisory Scale.

Science.gov (United States)

McGilton, Katherine S

2010-06-01

To describe the development and psychometric testing of the Supportive Supervisory Scale (SSS). The development of the items of the scale was based on Winnicott's relationship theory and on focus groups with 26 healthcare aides (HCAs) and 30 supervisors from six long-term care (LTC) facilities in Ontario, Canada. Content validity of the 15-item instrument was established by a panel of experts. Based on a secondary analysis of data collected from 222 HCAs in 10 LTC facilities in Ontario, Canada, the SSS was subjected to principal components analysis with oblique rotation. A two-factor solution was accepted, which is consistent with the theoretical conceptualization of the instrument. Factor I was labeled Respects Uniqueness and Factor II was labeled Being Reliable. Internal consistency of Factor I was .95, and that of Factor II was .91. Discriminant validity was also established. The focus groups revealed that "being available to staff" while "recognizing the HCA as an individual, and taking a moment to get to know them" was essential to feeling supported by their supervisor. The SSS is a reliable and valid measure of supervisory support of supervisors working in LTC facilities. At the core of supportive supervision is the supervisor's ability to develop and maintain positive relationships with each HCA. It is through respecting the uniqueness of each HCA and being reliable that supervisor-HCA relationships can flourish. Supportive leadership in LTC settings is a major contributor to HCAs' job satisfaction and retention and to quality of patient care. Therefore, a tool developed and tested to measure supervisors' supportive capacities in LTC is primal to evaluate the effectiveness of supervisors in these environments.

Supervisory fussy control for an electric generating hybrid system; Control supervisorio difuso para un sistema hibrido de generacion electrica

Energy Technology Data Exchange (ETDEWEB)

Lagunas Mendoza, Javier

2004-11-15

This work presents the development of a fuzzy supervisory controller for a hybrid power system (HPS). After reviewing the actual configurations for Hybrid Systems used around the world, it was defined the configuration and constitutive elements to be implemented in proposed HPS. The HPS includes: photovoltaic arrays, wind turbines as renewable sources, a Gen-set as a back-up system, a battery bank a mean for energy storage, AC loads and finally an inverter to transform DC to AC in order to provide electricity to the loads. Once the HPS configuration was selected, the mathematical models for the different elements of the system were selected. The validation of the models was made comparing the results from the model with collected real data of an experimental HPS installed in Pachuca Hidalgo. Using MatLab it was developed a program to simulate the operation of the a HPS. The main function of the supervisory controller within the HPS is to satisfy the objectives of operation of the system, and it was defined as part of the research work. The operation philosophy of the supervisory controller was defined having selected HPS configuration and the operation objectives of the system. Regarding to the supervisory controller development, first it was carried out a bibliographic review of the supervisory controllers that are used nowadays whose use some techniques of intelligent control. As result form this review the fuzzy logic technique was chosen to be implemented in the supervisory controller proposed. The resulting supervisory controller was a multi- variable system type, and it is implementation was challenging task. Its development was made using the hierarchic decomposition based on meta-knowledge. As result a smaller diffuse systems with a less number of rules were obtained. An important part of the work was the implementation of the supervisory controller in Matlab. The controller tested in the developed simulation program for SHGE. The results of operation of

Hierarchical Discrete Event Supervisory Control of Aircraft Propulsion Systems

Science.gov (United States)

Yasar, Murat; Tolani, Devendra; Ray, Asok; Shah, Neerav; Litt, Jonathan S.

2004-01-01

This paper presents a hierarchical application of Discrete Event Supervisory (DES) control theory for intelligent decision and control of a twin-engine aircraft propulsion system. A dual layer hierarchical DES controller is designed to supervise and coordinate the operation of two engines of the propulsion system. The two engines are individually controlled to achieve enhanced performance and reliability, necessary for fulfilling the mission objectives. Each engine is operated under a continuously varying control system that maintains the specified performance and a local discrete-event supervisor for condition monitoring and life extending control. A global upper level DES controller is designed for load balancing and overall health management of the propulsion system.

The Role of New Information Technologies in Facilitating Professional Reflective Practice across the Supervisory Triad.

Science.gov (United States)

Hodder, Jacqueline; Carter, David

This study investigated the role of new information management technologies in facilitating student teacher supervision across the supervisory triad of student teacher, cooperating teacher, and university supervisor. The study investigated how data routinely generated by teachers and stored within an Instructional Information Management System…

Supervisory control synthesis of discrete-event systems using a coordination scheme

Czech Academy of Sciences Publication Activity Database

Komenda, Jan; Masopust, Tomáš; van Schuppen, J. H.

2012-01-01

Roč. 48, č. 2 (2012), s. 247-254 ISSN 0005-1098 R&D Projects: GA ČR(CZ) GAP103/11/0517; GA ČR GPP202/11/P028 Grant - others:European Commission(XE) EU.ICT.DISC 224498 Institutional research plan: CEZ:AV0Z10190503 Keywords : discrete-event systems * supervisory control * distributed control * closed-loop systems * controllability Subject RIV: BA - General Mathematics Impact factor: 2.919, year: 2012 http://www.sciencedirect.com/science/article/pii/S0005109811005395

Evaluating the Impact of Communication Network Performance on Supervisory Supermarket Control

DEFF Research Database (Denmark)

Madsen, Jacob Theilgaard; Minko, Tomasz; Madsen, Tatiana Kozlova

2017-01-01

This paper addresses the evaluation of the impact of non-ideal communication networks on system performance of hierarchical control systems. It develops a stepwise evaluation approach that is applied to the example scenario of a supervisory controller for supermarket temperature control, addressing...... of communication network performance on the supermarket refrigeration control and resulting energy costs using simulation models. The results show that the controller is resilient to downstream information delays, however upstream delays or up- and downstream information loss can cause significant performance...

Supervisory control synthesis of discrete-event systems using a coordination scheme

Czech Academy of Sciences Publication Activity Database

Komenda, Jan; Masopust, Tomáš; van Schuppen, J. H.

2012-01-01

Roč. 48, č. 2 (2012), s. 247-254 ISSN 0005-1098 R&D Projects: GA ČR(CZ) GAP103/11/0517; GA ČR GPP202/11/P028 Grant - others:European Commission(XE) EU. ICT .DISC 224498 Institutional research plan: CEZ:AV0Z10190503 Keywords : discrete-event systems * supervisory control * distributed control * closed-loop systems * controllability Subject RIV: BA - General Mathematics Impact factor: 2.919, year: 2012 http://www.sciencedirect.com/science/article/pii/S0005109811005395

The nuclear licensing and supervisory procedures for nuclear facilities in the Federal Republic of Germany

International Nuclear Information System (INIS)

Franzen, L.F.

1982-02-01

A combined system has been developed in the Federal Republic of Germany: the States execute the Atomic Energy Act on behalf of the Federal Government. Despite these differences, the safety requirements and the safety standard achieved vary only insignificantly, as a result of a world-wide communication and of international cooperation. The legal prerequesites for the German nuclear licensing procedures have been established about 20 years ago, and, by a number of amendments have been adapted to new perceptions and developments. Several supplementary ordinances, due to further developments in nuclear technology, are being prepared. The work on associated technical provision, which had been neglected for a long time, has in recent years been tackled systematically and should, before long, lead to a comprehensive programme of safety standards, which simplifies and expedites the nuclear licensing procedures. Essential features of the licensing procedure are the phased structure and the division into intermediate steps which render it possible to adapt the safety requirements to the advancing state of science and technology. The responsible authorities call in experts for the safety verification of the application documents. It is the task of these experts to make assessments and to conduct quality examinations in the manufacturing plants and at the site, and to carry out recurrent tests. The public is involved by the announcement of the projects, the display of the documents and by the opportunity to raise objections during the licensing procedure. Licenses granted can be contested before the administrative courts. This procedure paves the way for the achievement of a satisfactory balance between private and public interests. (orig./HP)

Safety Supervisory Strategy for an Upper-Limb Rehabilitation Robot Based on Impedance Control

Directory of Open Access Journals (Sweden)

Lizheng Pan

2013-02-01

Full Text Available User security is an important consideration for robots that interact with humans, especially for upper-limb rehabilitation robots, during the use of which stroke patients are often more susceptible to injury. In this paper, a novel safety supervisory control method incorporating fuzzy logic is proposed so as to guarantee the impaired limb's safety should an emergency situation occur and the robustness of the upper-limb rehabilitation robot control system. Firstly, a safety supervisory fuzzy controller (SSFC was designed based on the impaired-limb's real-time physical state by extracting and recognizing the impaired-limb's tracking movement features. Then, the proposed SSFC was used to automatically regulate the desired force either to account for reasonable disturbance resulting from pose or position changes or to respond in adequate time to an emergency based on an evaluation of the impaired-limb's physical condition. Finally, a position-based impedance controller was implemented to achieve compliance between the robotic end-effector and the impaired limb during the robot-assisted rehabilitation training. The experimental results show the effectiveness and potential of the proposed method for achieving safety and robustness for the rehabilitation robot.

The Supervisory Control System for the HL-2A Neutral Beam Injector

Science.gov (United States)

Li, Bo; Li, Li; Feng, Kun; Wang, Xueyun; Yang, Jiaxing; Huang, Zhihui; Kang, Zihua; Wang, Mingwei; Zhang, Guoqing; Lei, Guangjiu; Rao, Jun

2009-06-01

Supervisory control and protection system of the neutral beam injector (NBI) in the HL-2A tokamak is presented. The system is used for a safe coordination of all the main NBI subsystems. Because the system is based on computer networks with its transmission medium of optical fiber, its advantages in high operational stability, reliability, security and flexible functional expandability are clearly shown during the NBI commissioning and heating experiment in HL-2A.

A supervisory control approach in economic MPC design for refrigeration systems

DEFF Research Database (Denmark)

Shafiei, Seyed Ehsan; Stoustrup, Jakob; Rasmussen, Henrik

2013-01-01

A model predictive control at the supervisory level is proposed for refrigeration systems using price and temperature predictions. The control objective is to minimize the overall energy cost within the prediction horizon. The method is mainly developed for demand-side management in the future...... to rearrange the problem to facilitate convex programming. A nonlinear continuous time model validated by real data is employed to simulate system operation. The results show a considerable economic saving as well as a trade-off between the saving level and design complexity....

Ausrüstung von Starkstromanlagen mit elektronischen Betriebsmitteln / Achtung: Abschnitte 5.3.2.2.2 (einschließlich Kurve 2 in Bild 2) und 7.3.1.2 gelten erst ab Mai 1990. Bestehende Anlagen und Betriebsmittel einschließlich Ersatzlieferungen brauchen nicht den Anforderungen dieser neuen Norm angepaßt zu werden.

CERN Document Server

Deutsches Institut für Normung. Berlin

1988-01-01

Ausrüstung von Starkstromanlagen mit elektronischen Betriebsmitteln / Achtung: Abschnitte 5.3.2.2.2 (einschließlich Kurve 2 in Bild 2) und 7.3.1.2 gelten erst ab Mai 1990. Bestehende Anlagen und Betriebsmittel einschließlich Ersatzlieferungen brauchen nicht den Anforderungen dieser neuen Norm angepaßt zu werden.

7 CFR 1717.611 - RUS approval of expenditures for legal, accounting, engineering, and supervisory services.

Science.gov (United States)

2010-01-01

..., supervisory (other than for the management and operation of the borrower's electric system, see § 1717.608(d... 7 Agriculture 11 2010-01-01 2010-01-01 false RUS approval of expenditures for legal, accounting... COMMON TO INSURED AND GUARANTEED ELECTRIC LOANS Operational Controls § 1717.611 RUS approval of...

Self-Tuning Linear Quadratic Supervisory Regulation of a Diesel Generator using Large-Signal State Estimation

DEFF Research Database (Denmark)

Knudsen, Jesper Viese; Bendtsen, Jan Dimon; Andersen, Palle

2016-01-01

In this paper, a self-tuning linear quadratic supervisory regulator using a large-signal state estimator for a diesel driven generator set is proposed. The regulator improves operational efficiency, in comparison to current implementations, by (i) automating the initial tuning process and (ii...... throughout the operating range of the diesel generator....

MFTF supervisory control and diagnostics system hardware

International Nuclear Information System (INIS)

Butner, D.N.

1979-01-01

The Supervisory Control and Diagnostics System (SCDS) for the Mirror Fusion Test Facility (MFTF) is a multiprocessor minicomputer system designed so that for most single-point failures, the hardware may be quickly reconfigured to provide continued operation of the experiment. The system is made up of nine Perkin-Elmer computers - a mixture of 8/32's and 7/32's. Each computer has ports on a shared memory system consisting of two independent shared memory modules. Each processor can signal other processors through hardware external to the shared memory. The system communicates with the Local Control and Instrumentation System, which consists of approximately 65 microprocessors. Each of the six system processors has facilities for communicating with a group of microprocessors; the groups consist of from four to 24 microprocessors. There are hardware switches so that if an SCDS processor communicating with a group of microprocessors fails, another SCDS processor takes over the communication

Supervisory Control Technique For An Assembly Workstation As A Dynamic Discrete Event System

Directory of Open Access Journals (Sweden)

Daniela Cristina CERNEGA

2001-12-01

Full Text Available This paper proposes a control problem statement in the framework of supervisory control technique for the assembly workstations. A desired behaviour of an assembly workstation is analysed. The behaviour of such a workstation is cyclic and some linguistic properties are established. In this paper, it is proposed an algorithm for the computation of the supremal controllable language of the closed system desired language. Copyright © 2001 IFAC.

Automatic Generation of Supervisory Control System Software Using Graph Composition

Science.gov (United States)

Nakata, Hideo; Sano, Tatsuro; Kojima, Taizo; Seo, Kazuo; Uchida, Tomoyuki; Nakamura, Yasuaki

This paper describes the automatic generation of system descriptions for SCADA (Supervisory Control And Data Acquisition) systems. The proposed method produces various types of data and programs for SCADA systems from equipment definitions using conversion rules. At first, this method makes directed graphs, which represent connections between the equipment, from equipment definitions. System descriptions are generated using the conversion rules, by analyzing these directed graphs, and finding the groups of equipment that involve similar operations. This method can make the conversion rules multi levels by using the composition of graphs, and can reduce the number of rules. The developer can define and manage these rules efficiently.

Supervisory Styles and Graduate Student Creativity: The Mediating Roles of Creative Self-Efficacy and Intrinsic Motivation

Science.gov (United States)

Gu, Jibao; He, Changqing; Liu, Hefu

2017-01-01

Based on social cognitive theory and leadership theory, the current study tests a theoretical model linking supervisory styles (i.e. supportive and directive) with graduate student creativity via psychological cognitive factors (specifically, creative self-efficacy and intrinsic motivation). Results from a sample of 216 graduate students of 1…

Boundary Management in Doctoral Supervision: How Supervisors Negotiate Roles and Role Transitions throughout the Supervisory Journey

Science.gov (United States)

Benmore, Anne

2016-01-01

In this paper, boundary management illuminates understanding of the doctoral supervisory relationship. Boundary management is presented as a theoretical vehicle that helps to define and explain roles that supervisors employ at different junctures along the doctoral journey and how transitions between these are negotiated. The paper draws on the…

Care neglect, supervisory neglect, and harsh parenting in the development of children's aggression: a replication and extension.

Science.gov (United States)

Knutson, John F; DeGarmo, David; Koeppl, Gina; Reid, John B

2005-05-01

To understand the effects of neglectful parenting, poor supervision, and punitive parenting in the development of children's aggression, 218 children ages 4 to 8 years who were disadvantaged and their mothers were recruited from two states to develop a sample that was diverse with respect to degree of urbanization and ethnicity. Multimethod and multisource indices of the predictive constructs (Social Disadvantage, Denial of Care Neglect, Supervisory Neglect, and Punitive Discipline) and the criterion construct (Aggression) were used in a test of a theoretical model using structural equation modeling. The results established the role of care neglect, supervisory neglect, and punitive parenting as mediators of the role of social disadvantage in the development of children's aggression, the importance of distinguishing between two subtypes of neglect, and the need to consider the role of discipline in concert with neglect when attempting to understand the parenting in the development of aggression.

High currents, low voltages. Low-cost, high efficiency power supply meets the requirements of Intel Mobile Voltage Positioning; Von dicken Stroemen und kleinen Spannungen. Preiswerte Stromversorgung mit hohem Wirkungsgrad erfuellt die Anforderungen des Intel Mobile Voltage Positioning

Energy Technology Data Exchange (ETDEWEB)

Chen, V.W.; Guan, P.; Chen, D. [Linear Technology, CA (United States)

2001-12-27

The increasing demands on notebook computers have clock rates and currents and reduced voltages as CPUs are produced in increasingly smaller structural sizes. This makes high demands on power supply. [German] Die steigende Nachfrage nach Rechenleistung in Notebook-Computern hat zu einem betraechtlichen Anstieg der Taktfrequenzen und der Stromaufnahme der CPUs gefuehrt. Gleichzeitig sind die Versorgungsspannungen erheblich gesunken, da die CPUs in Prozessen mit immer kleineren Strukturgroessen hergestellt werden. Als die CPU-Taktfrequenzen 1 GHz ueberstiegen, hat die Stromaufnahme der CPU erstmals 20 A ueberschritten, und die minimale Versorgungsspannung ist auf unter 1 V gefallen. Dies stellt gewaltige Anforderungen an die Stromversorgungen. (orig.)

Pupillary Response as an Indicator of Processing Demands Within a Supervisory Control Simulation Environment

Science.gov (United States)

2015-05-07

Yerkes, R.M., and Dodson, J.D. (1908). The relation of strength of stimulus to rapidity of habit -formation. Journal of comparative neurology and psychology 18, 459-482. ...the amount of mental effort exerted (Kahneman, 1973; Beatty & Lucero-Wagoner, 2000; Andreassi, 2007). The vast majority of these studies , however...of this initial study , the authors were interested in investigating whether pupillometry data collected in a realistic UAV supervisory control

Supervisory Control Strategy Development

International Nuclear Information System (INIS)

Gary D Storrick; Bojan Petrovic

2007-01-01

Task 4 of this collaborative effort between ORNL, Brazil, and Westinghouse for the International Nuclear Energy Research Initiative entitled 'Development of Advanced Instrumentation and Control for an Integrated Primary System Reactor' focused on the design of the hierarchical supervisory control for multiple-module units. The state of the IRIS plant design--specifically, the lack of a detailed secondary system design--made developing a detailed hierarchical control difficult at this time. However, other simultaneous and ongoing efforts have contributed to providing the needed information. This report summarizes the results achieved under Task 4 of this Financial Assistance Award. Section 1.2 describes the scope of this effort. Section 2 discusses the IRIS control functions. Next, it briefly reviews the current control concepts, and then reviews the maneuvering requirements for the IRIS plant. It closes by noting the benefits that automated sequences have in reducing operator workload. Section 3 examines reactor loading in the frequency domain to establish some guidelines for module operation, paying particular attention to strategies for using process steam for desalination and/or district heating. The final subsection discusses the implications for reactor control, and argues that using the envisioned percentage (up to 10%) of the NSSS thermal output for these purposes should not significantly affect the NSSS control strategies. Section 4 uses some very general economic assumptions to suggest how one should approach multi-module operation. It concludes that the well-known algorithms used for economic dispatching could be used to help manage a multi-unit IRIS site. Section 5 addresses the human performance factors of multi-module operation. Section 6 summarizes our conclusions

Acute abdomen. Clinical background and demands on imaging; Akutes Abdomen. Klinische Begriffsbestimmung und Anforderungen an die Bildgebung

Energy Technology Data Exchange (ETDEWEB)

Graeb, C.; Jauch, K.W. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Klinik und Poliklinik fuer Chirurgie, Muenchen (Germany); Reiser, M.; Graser, A. [Klinikum der Ludwig-Maximilians-Universitaet Muenchen, Campus Grosshadern, Institut fuer Klinische Radiologie, Muenchen (Germany)

2010-03-15

The term ''acute abdomen'' does not describe a specific disease entity but is more a critical clinical state which incorporates very heterogeneous clinical presentations. The prognosis of any disease depends on the time frame from the onset of symptoms to the initiation of a specific therapy. For this reason there are special expectations by clinicians regarding the diagnostic assessment provided by radiology which is expected to deliver an immediate diagnosis supporting further therapeutic decisions. Along with the patient's clinical history, physical examination and blood tests, radiological diagnostics are essential for enabling a specific treatment. From a surgical point of view the radiologist is expected to help in differentiating between cases with indications for emergency surgery and cases eligible for elective surgery or conservative treatment. (orig.) [German] Der Begriff ''akutes Abdomen'' stellt keine eigenstaendige Erkrankung dar, sondern beschreibt einen kritischen klinischen Zustand, unter dessen Oberbegriff sich die unterschiedlichsten Krankheitsbilder subsumieren lassen. Das Zeitintervall zwischen dem Auftreten der ersten Symptome bis zur Einleitung einer gezielten Therapie ist fuer die Prognose der Patienten der entscheidende Faktor. Aus diesem Grund bestehen besondere Anforderungen an die bildgebende Diagnostik, die dazu beitragen soll, innerhalb kuerzester Zeit eine moeglichst genaue Diagnose zu stellen. Neben Anamnese, klinischer Untersuchung und Labordiagnostik stellt die radiologische Untersuchung einen wesentlichen Baustein vor der Therapieeinleitung dar. Aus chirurgischer Sicht muessen Krankheitsbilder, die eine sofortige Notfalloperation erforderlich machen, von Erkrankungen differenziert werden, die eine elektive Chirurgie oder ein konservatives Vorgehen indizieren. (orig.)

Home nurses' turnover intentions: the impact of informal supervisory feedback and self-efficacy.

Science.gov (United States)

Van Waeyenberg, Thomas; Decramer, Adelien; Anseel, Frederik

2015-12-01

To examine how home nurses' turnover intentions are affected by the quality and frequency of supervisory feedback and by their own self-efficacy. Little is known about effective retention strategies for the growing home healthcare sector that struggles to retain an adequate workforce. While the work environment and supervisors have been found to play a key-role in nurses' turnover intentions, home nurses mostly work autonomously and apart from their supervisors. These circumstances require a customized approach and need to be understood to ensure high-quality home health care. We used a correlational, cross-sectional survey design. A convenience sample of 312 home nurses was selected from a division of a large home health care organization in Flanders, Belgium. Data were collected in 2013 using structured questionnaires and analysed using descriptive statistics, structural equation modelling and relative weight analysis. The quality of feedback was related to lower levels of turnover intentions. This relationship was fully mediated by home nurses' self-efficacy. Frequent favourable feedback was directly related to lower turnover intentions while the relationship between frequent unfavourable feedback and turnover intentions was conditional on home nurses' level of self-efficacy. This study contributes to our understanding of home nurses' turnover intentions and the role of informal supervisory feedback and home nurses' self-efficacy. © 2015 John Wiley & Sons Ltd.

Supervisory Control and Data Acquisition (SCADA) Systems and Cyber-Security: Best Practices to Secure Critical Infrastructure

Science.gov (United States)

Morsey, Christopher

2017-01-01

In the critical infrastructure world, many critical infrastructure sectors use a Supervisory Control and Data Acquisition (SCADA) system. The sectors that use SCADA systems are the electric power, nuclear power and water. These systems are used to control, monitor and extract data from the systems that give us all the ability to light our homes…

Support of the Ukrainian supervisory authority in establishing a modern nuclear power plant monitoring

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.; Schumann, P.; Seidel, A.; Weiss, F.P.; Zschau, J.; Nowak, K.

2000-01-01

The type of monitoring of nuclear power plants in Ukraine practiced in the early nineties provided the supervisory authority with only inadequate access to information about the current safety status of plants. For the Zaporozhye nuclear power plant, unit 5, a technical system to improve operational monitoring has been designed, installed and commissioned for trial operation at the end of 1995 as a pilot project. The system complements existing operational checking and monitoring facilities by including modern means of information technology. It enables concentration on a continuous monitoring of the state of unit 5 in normal operation and in cases of anormalies or incidents so that when recognisable deviations from the regular plant operation occur, the authority can immediately inquire and if necessary impose conditions on the operator. In 1997, the Information and Crisis Centre of the Ukraninian supervisory authority in Kiev was equipped with the most essential technical means necessary for quasi-simultaneous transfer of data and voice and for monitoring purposes and connected to the Centre to the Zaporozhye system. A similar monitoring system for both VVER-440 units of the Rovno nuclear power plant by analogy with the pilot project was specified and put into operation and connected to the ICC in 1998. (orig.) [de

Authorization procedure for the construction and operation of nuclear installations within the EC Member States, including supervision and control

International Nuclear Information System (INIS)

Amaducci, Sandro; Didier, J.M.

1978-01-01

This report is an updating of the report EUR 5284, Authorization procedure for the construction and operation of nuclear installations within the EEC Member States, prepared in 1974 by J.M. Didier and Associates. Recent developments regarding the authorization procedure for the construction and operation of nuclear installations have taken place in Italy (introduction of a site approval procedure) and in Denmark (adoption of an overall legislation on the subject, however not yet in force). With respect to supervision and control of nuclear installations during construction and operation, competences of, as well as their exercise by, supervisory authorities in all EC Member States, with the exception of Ireland, are also analysed in the current study

Influence of Gender on the Supervisory Relationship: A Review of the Empirical Research from 1996 to 2010

Science.gov (United States)

Hindes, Yvonne L.; Andrews, Jac J. W.

2011-01-01

Twelve empirical studies published since 1996 regarding the effects of gender on the supervisory relationship are reviewed. Each study was reviewed and critiqued in relation to its methodology, research design, critical findings, and limitations. The results of these studies indicate that (a) gender influences the openness and affiliation one…

78 FR 47217 - Proposed Supervisory Guidance on Implementing Dodd-Frank Act Company-Run Stress Tests for Banking...

Science.gov (United States)

2013-08-05

... 10-50. More advanced portfolio segmentation can take several forms, such as by product (construction... CORPORATION 12 CFR Part 325 Proposed Supervisory Guidance on Implementing Dodd-Frank Act Company-Run Stress... 165(i)(2) of the Dodd-Frank Act Wall Street Reform and Consumer Protection Act (``DFA'') stress tests...

Regime-based supervisory control to reduce power fluctuations from offshore wind power plants

DEFF Research Database (Denmark)

Barahona Garzón, Braulio; Cutululis, Nicolaos Antonio; Trombe, Pierre-Julien

2013-01-01

Wind power fluctuations, especially offshore, can pose challenges in the secure and stable operation of the power system. In modern large offshore wind farms, there are supervisory controls designed to reduce the power fluctuations. Their operation is limited due to the fact that they imply loss...... that consider different wind power regimes to derive control setpoints by using a Markov-Switching AutoRegressive model. We evaluate the performance versus measured data in terms of power ramp characteristics and energy efficiency....

[Legislative and legal security of supervisory activities in the sphere of protection of consumers' rights and human well-being].

Science.gov (United States)

Rumiantsev, G I; Kutsenko, G I; Polesskiĭ, V A

2007-01-01

Sanitary legislation plays an important role in supervisory activities ensuring the protection of consumers' rights and human well-being. The paper considers the basic laws and standard acts allowing for legal regulation in this sphere of activities.

Introduction to Nuclear Power Plant Environment Supervisory Committee

International Nuclear Information System (INIS)

Lee, Byung Il

2008-01-01

In Korea, there are five nuclear power plant sites, located at Yongkwang, Kori, Shin Kori, Uljin, and Wolsong. Each administrative district has its own NESC (Nuclear plant Environment Public Supervisory Committee) which consists of a steering committee and a center. The purpose of NESC is to let the public survey and inspect nuclear plant environment and then improve a clarity and confidence in plant construction and operation by themselves. In order to understand the situation of NESC and explore ways toward a better role of NESC, in this paper we try to enumerate a few major facts related to a current status of NESC. As a summary, there must be a great role of NESC in the relationship between the residents, a nuclear industry company and the related government division. Furthermore, NESC would certainly do its role for all sides provided that more strong definition of NESC in law, more financial supporting and more philosophical speculation for the being of NESC

Team performance in networked supervisory control of unmanned air vehicles: effects of automation, working memory, and communication content.

Science.gov (United States)

McKendrick, Ryan; Shaw, Tyler; de Visser, Ewart; Saqer, Haneen; Kidwell, Brian; Parasuraman, Raja

2014-05-01

Assess team performance within a net-worked supervisory control setting while manipulating automated decision aids and monitoring team communication and working memory ability. Networked systems such as multi-unmanned air vehicle (UAV) supervision have complex properties that make prediction of human-system performance difficult. Automated decision aid can provide valuable information to operators, individual abilities can limit or facilitate team performance, and team communication patterns can alter how effectively individuals work together. We hypothesized that reliable automation, higher working memory capacity, and increased communication rates of task-relevant information would offset performance decrements attributed to high task load. Two-person teams performed a simulated air defense task with two levels of task load and three levels of automated aid reliability. Teams communicated and received decision aid messages via chat window text messages. Task Load x Automation effects were significant across all performance measures. Reliable automation limited the decline in team performance with increasing task load. Average team spatial working memory was a stronger predictor than other measures of team working memory. Frequency of team rapport and enemy location communications positively related to team performance, and word count was negatively related to team performance. Reliable decision aiding mitigated team performance decline during increased task load during multi-UAV supervisory control. Team spatial working memory, communication of spatial information, and team rapport predicted team success. An automated decision aid can improve team performance under high task load. Assessment of spatial working memory and the communication of task-relevant information can help in operator and team selection in supervisory control systems.

Comparative response time and fault logging with a PLC and supervisory software and a standalone unit developed for recording

International Nuclear Information System (INIS)

Baldaconi, Ricardo H.; Costa, Fabio E. da

2017-01-01

The Cobalt-60 irradiator of IPEN / CNEN, a category IV facility, has a security system for inter locking doors or exposure of radioactive sources made simultaneously by a programmable logic controller (PLC) model S7-200 from Siemens and a relay logic. From a set of information, both systems work together opening doors or exposing the sources. All incoming and outgoing information are sent serially via EIA232 communication to a personal computer with Windows® platform for a supervisory program which provides the monitoring of the entire process by a synoptic table on the computer screen and is also intended to keep records of all events on the computer's hard drive. A deficiency was found for the process of sending events via serial communication (EIA232) from PLC to the supervisory program. When failure occurred in a very short time, the PLC always took the right decision, but the registration process that had to go through the Windows® timeshare lost the information. In the previous work developed a standalone electronics unit connected to the inputs and outputs of the security system, fully optocoupled to avoid any interference to the security system that records each event on a memory card. In this work, for checking the unit developed record time ability, transients incoming signals for simulating failures, were injected at security system inputs and the response time of security system, supervisory program and the autonomous unity were measured and compared. (author)

Comparative response time and fault logging with a PLC and supervisory software and a standalone unit developed for recording

Energy Technology Data Exchange (ETDEWEB)

Baldaconi, Ricardo H., E-mail: ricardohovacker@hotmail.com [Escola Senai Roberto Simonsen, Educação e Tecnologia, Sao Paulo, SP (Brazil); Costa, Fabio E. da, E-mail: fecosta@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

The Cobalt-60 irradiator of IPEN / CNEN, a category IV facility, has a security system for inter locking doors or exposure of radioactive sources made simultaneously by a programmable logic controller (PLC) model S7-200 from Siemens and a relay logic. From a set of information, both systems work together opening doors or exposing the sources. All incoming and outgoing information are sent serially via EIA232 communication to a personal computer with Windows® platform for a supervisory program which provides the monitoring of the entire process by a synoptic table on the computer screen and is also intended to keep records of all events on the computer's hard drive. A deficiency was found for the process of sending events via serial communication (EIA232) from PLC to the supervisory program. When failure occurred in a very short time, the PLC always took the right decision, but the registration process that had to go through the Windows® timeshare lost the information. In the previous work developed a standalone electronics unit connected to the inputs and outputs of the security system, fully optocoupled to avoid any interference to the security system that records each event on a memory card. In this work, for checking the unit developed record time ability, transients incoming signals for simulating failures, were injected at security system inputs and the response time of security system, supervisory program and the autonomous unity were measured and compared. (author)

The relationship between constructivist supervisory practices, school climate, and student proficiency in reading, mathematics, and science: Evidence from NELS:88

Science.gov (United States)

Molnar, John Alexander

In an effort to improve instruction and student learning, school reform efforts have become prevalent. School reformers have examined many aspects of the school experience, including learning theories such as behaviorism and constructivism, the changing roles of teachers and supervisors, and even the concept of the school itself. The theoretical framework for this study centered around constructivist learning theory. The study itself focused on the application of constructivist learning theory to the supervisory process. The study examined five areas of interest: (a) teachers' perceptions of constructivist supervisory behavior; (b) teachers' perceptions of efficacy and control in the classroom; (c) teachers' perceptions of school climate; (d) teachers' perceptions of job satisfaction, and (e) the influences of each of the aforementioned on student proficiency in mathematics, reading, and science. Data for the study was drawn from the first follow-up survey of the National Educational Longitudinal Study of 1988 (NELS: 88). NELS: 88 investigated a wide variety of factors that influence the educational process. The first follow-up focuses on environmental factors that affect teachers and students. Variables were selected from the NELS:88 data set that represented the areas to be examined. Factor analysis and correlational analysis were applied to ensure that the variables were measuring distinct constructs and to determine ways they could be grouped for analysis. Multiple linear regression analysis was applied to determine relationships among the individual and composite variables, controlling for student and teacher demographic factors. The results of the study suggest that varying relationships do exist between constructivist supervisory practices and the constructs measuring school climate and job satisfaction. The results also suggest that varying relationships exist between each of these factors and student proficiency in mathematics, reading, and science

The Single Supervisory Mechanism: the Building Pillar of the European Banking Union

Directory of Open Access Journals (Sweden)

Luigi Chiarella

2016-07-01

Full Text Available One of the lessons learned from the 2008 financial crisis is that when a bank in Europe goes into trouble the ensuing effects can reach far beyond the immediate threat to its depositors and shareholders. In particular, the crisis has revealed the extent to which irresponsible behavior in the banking sector could undermine the foundations of the financial system and threaten the real economy, turning a banking crisis into a sovereign debt crisis as occurred in the eurozone in 2011. In response to this lesson, Member States first tried to address the systemic fragility of their banking systems through national policy tools, but countries that share a common currency and are more interdependent required more integrated responses. Therefore, at the euro area summit in June 2012, the European Council agreed to break the vicious circle between banks and sovereign debt and decided to create a banking union that would allow a centralized supervision for banks in the euro area through a newly established Single Supervisory Mechanism (SSM and a centralized resolution scheme. The SSM became operational in November 2014 and represents the building pillar of the banking union. The purpose of this paper is then to provide, after a brief description of the background (Par. 1, an analysis of the Single Supervisory Mechanism, illustrating its functioning (Par. 2, then focusing on the position and the powers of the ECB within it (Par. 3 and finally pointing out some remarks on the potential weaknesses of the new regime (Par. 4.

Psychological contract breach in the anticipatory stage of change : Employee responses and the moderating role of supervisory informational justice

NARCIS (Netherlands)

De Ruiter, M.; Schaveling, J.; Schalk, R.; Gelder, van D.

2016-01-01

This study examined the impact of two types of psychological contract breach (organizational policies and social atmosphere breach) on resistance to change and engagement in the anticipatory phase of change and assessed whether supervisory informational justice mitigated the negative effects of

Psychological contract breach in the anticipatory stage of change : Employee responses and the moderating role of supervisory informational justice

NARCIS (Netherlands)

de Ruiter, M.; Schalk, R.; Schaveling, Jaap; van Gelder, Daniel

This study examined the impact of two types of psychological contract breach (organizational policies and social atmosphere breach) on resistance to change and engagement in the anticipatory phase of change and assessed whether supervisory informational justice mitigated the negative effects of

A test system and supervisory control and data acquisition application with programmable logic controller for thermoelectric generators

International Nuclear Information System (INIS)

Ahiska, Rasit; Mamur, Hayati

2012-01-01

Highlights: ► A new TEG test measurement system with the PLC has been carried out. ► A new SCADA program has been written and tested for the test measurement system. ► An operator panel has been used for monitoring to the instant TEG data. ► All of the measurement data of TEG have been aggregated in the system. - Abstract: In this study, a new test measurement system and supervisory control and data acquisition application with programmable logic controller has been carried out to be enable the collection of the data of thermoelectric generator for the usage of thermoelectric modules as thermoelectric generator. During the production of the electric energy from the thermoelectric generator, the temperatures of the surfaces of the thermoelectric generator, current–voltage values obtained from output of the thermoelectric generator, hot and cold flows have been measured by the newly established system instantly. All these data have been monitored continuously from the computer and recorded by a supervisory control and data acquisition program. At the same time, in environments where there was no computer, an operator panel with the ability to communicate with the programmable logic controller has been added for the monitoring of the instant thermoelectric generator data. All of the measurement data of the thermoelectric generator have been aggregated in the new test measurement and supervisory control and data acquisition system. The setup test measurement system has been implemented on the thermoelectric generator system with about 10 W. Thermoelectric generators, Altec-GM-1 brand-coded have been examined by the new proposed test measurement system and the values of maximum power and thermoelectric generator efficiency were calculated by the programmable logic controller. When the obtained results were compared with the datasheets, the relative error for the maximum power was around 4% and the value for efficiency was below 3%.

Laboratory technical services provides business opportunities for supervisory control and data acquisition systems

International Nuclear Information System (INIS)

Ballard, W.

1994-01-01

The author presents some additional information about what he considers are some really great opportunities for the business community to participate in developing the greatest scientific project in the history of mankind. Facility Engineering Services is part of Laboratory Technical Services. As part of this group, it has the responsibility to direct the construction of interim facilities, scientific labs, production process, cooling towers, cooling ponds and the operation and control of SSC Laboratory conventional support systems. These operations and controls will be accomplished through the employment of a Supervisory Control and Data Acquisition system (SCADA)

Overview of MFTF supervisory control and diagnostics system software

International Nuclear Information System (INIS)

Ng, W.C.

1979-01-01

The Mirror Fusion Test Facility (MFTF) at the Lawrence Livermore Laboratory (LLL) is currently the largest mirror fusion research project in the world. Its Control and Diagnostics System is handled by a distributed computer network consisting of nine Interdata minicomputer systems and about 65 microprocessors. One of the design requirements is tolerance of single-point failure. If one of the computer systems becomes inoperative, the experiment can still be carried out, although the system responsiveness to operator command may be degraded. In a normal experiment cycle, the researcher can examine the result of the previous experiment, change any control parameter, fire a shot, collect four million bytes of diagnostics data, perform intershot analysis, and have the result presented - all within five minutes. The software approach adopted for the Supervisory Control and Diagnostics System features chief programmer teams and structured programming. Pascal is the standard programming language in this project

Specification of technical means for implementation of supervisory algorithms of the status of a nuclear reactor and of the main coolant pump of a NPP

International Nuclear Information System (INIS)

Jirsa, P.

2000-11-01

Inclusion into the programming of inputs of the supervisory algorithm (data collection from the monitoring system, transmission of diagnostic output fro other system and transmission of technological data), of the supervisory process proper based on the data obtained (data analysis) and of the output (presentation of the results to the operator, communication with the master and archiving systems, etc.) requires knowledge of the format of the data transmitted, their availability, communication network protocols, operating system, etc. Hence, the environment for which the algorithm will be developed should be specified, roughly at least. The following topics are addressed: Description of technical means of Czech nuclear power plants (Dukovany, Temelin, Mochovce), and Proposal for technical means to implement the monitoring algorithm (Requirements related to the monitoring systems, Identification of the reference system, Parameters of the selected system). Since no domestic manufacturer of HW for monitoring and diagnostic systems exists, a novel system of the Brueel and Kjaer company for on-line diagnosis and monitoring, COMPASS, was selected as a model model system for the implementation of the supervisory algorithms. (P.A.)

Decision Support in Supervisory Control of High-Risk Industrial Systems

DEFF Research Database (Denmark)

Rasmussen, Jens; Goodstein, L. P.

1987-01-01

available to the operators their conceptual models and their processing resources so as to allow the operators to function as their extended arm in coping with the plant. Such as interactive decision-making activity would thus benefit from this simultaneous availability of the design basis, up......It is argued that the supervisory control of complex industrial processes having a potential for serious consequences in case of accidents requires careful consideration of the allocation of decision making between the three main agents of control; namely the designer, the operator...... and the automatic control system. In particular, it is advocated that, instead of continuing their efforts to make their preplanning of responses and countermeasures more and more complete and thus restrict the operators' own initiative, designers should take advantage of modern information technology to make...

76 FR 38293 - Risk Management Controls for Brokers or Dealers With Market Access

Science.gov (United States)

2011-06-30

... 3235-AK53 Risk Management Controls for Brokers or Dealers With Market Access AGENCY: Securities and... of risk management controls and supervisory procedures that, among other things, is reasonably... relevant risk management controls and supervisory procedures required under the Rule. DATES: The effective...

Procedures of quality control of radiopharmaceutical activity counters

International Nuclear Information System (INIS)

Oliveira, A.E. de; Iwahara, A.; Gaast, H.A. van der; Buckman, S.M.

1999-01-01

The Radionuclides Metrology Supervision-Ionizing Radiation Metrology National Laboratory maintain and distributes the brazilian standards for radioactivity measurements. The Brazilian Institute for Metrology, Regulation and Industrial Quality (INMETRO), which is the brazilian authority for standards verification, is coordinating the enhancement of the standards distribution. Concerning to the nuclear medicine related radioisotopes, this network will provide for calibration of brazilian hospitals and clinics instruments, assuring great accuracy of the radiopharmaceuticals activities. This work gives details of the calibration quality control procedures recommended by the Radionuclides Metrology Supervisory (Brazilian National Nuclear Energy Commission) and the Radioactive Standards Division of the Australian Nuclear Technology and Science Organization (ANSTO). This information can be used as a guide for the brazilian nuclear medicine services guaranty on the accuracy and precision of the radiopharmaceuticals activity measurements measurements

Development of a supervisory control and data acquisitioning system

International Nuclear Information System (INIS)

Kamboh, A.M.; Fakhar, H.A.; Rafiq, G.; Kazmi, S.R.

2004-01-01

This paper describes a Supervisory Control and Data Acquisitioning system called SCADA that we have developed at NUST. This research is aimed at the development of a network where a central Control Server extends bidirectional data exchange capability to hundreds of geographically remote sensors and actuators spread over a distance greater than 3 Km. Several battery-driven handheld terminals called Remote Terminal Units (RTU) have been designed to provide both wired and wireless connectivity between sensors and the network, also adding limited mobility to the sensors. Simple transceivers give the RTUs wireless access to network. The Human-Machine Intel (HMI) for the RTUs and the Server have been provided. A repeater has also been designed to increase the number of RTUs connected, and the maximum allowed distance between units and the server. The wired network gives several times faster connectivity than the wireless network, in addition to the larger area covered, but at the cost of mobility. (author)

Shifts in Competences between Member States and the EU in the New Supervisory System for Credit Institutions and their Consequences for Judicial Protection

Directory of Open Access Journals (Sweden)

Laura Wissink

2014-12-01

Full Text Available The Single Supervisory Mechanism (SSM is a striking example of the tendency within the EU to transfer decisive, regulatory and enforcement powers to the EU level. The SSM involves a complex system of mixed administration in order to ensure effective banking supervision within the Eurozone. Whereas such mixed administration might be necessary in order to achieve effective cross-border supervision, it also creates legal uncertainties due to the different legal orders involved. In this paper, the effect of the mixed administration on formal and substantive judicial protection is discussed.The paper analyses the right of access to the courts in the case of common procedures and certain ECB decisions. Furthermore, it is examined whether the ECB and national competent authorities have adequate powers to carry out supervision within the SSM. Lastly, the paper pursues the issues with regard to substantive judicial protection in greater depth, in particular the right of respect for the home and the rights of defence.

Idaho National Laboratory Supervisory Control and Data Acquisition Intrusion Detection System (SCADA IDS)

Energy Technology Data Exchange (ETDEWEB)

Jared Verba; Michael Milvich

2008-05-01

Current Intrusion Detection System (IDS) technology is not suited to be widely deployed inside a Supervisory, Control and Data Acquisition (SCADA) environment. Anomaly- and signature-based IDS technologies have developed methods to cover information technology-based networks activity and protocols effectively. However, these IDS technologies do not include the fine protocol granularity required to ensure network security inside an environment with weak protocols lacking authentication and encryption. By implementing a more specific and more intelligent packet inspection mechanism, tailored traffic flow analysis, and unique packet tampering detection, IDS technology developed specifically for SCADA environments can be deployed with confidence in detecting malicious activity.

Research on Real-Time Supervisory System for Compaction Quality in Face Rockfill Dam Engineering

Directory of Open Access Journals (Sweden)

Shengxiang Huang

2018-01-01

Full Text Available Compaction quality control in filling construction is of great significance to the stability and durability of the face rockfill dam. The conventional method of quality control mainly relies on manual process control and inspection for a limited number of test holes, which cannot meet the high requirements of modern mechanized construction and schedule anymore, with increasing of scale of face rockfill dams. There is an urgent need to propose a new quality control method of face rockfill dams during the entire compaction process. In this paper, a supervisory system based on GNSS (Global Navigation Satellite System technology, wireless data communication technology, Internet of things technology, and computer technology is developed to supervise the real-time roller compaction parameters of the working surface including rolling track, rolling times, rolling speed, thickness, and smoothness. The system obtains continuous and high-precision spatial position information of roller compaction machines through GNSS technology and then calculates the roller compaction parameter information. The compaction quality control for the face rockfill dam is achieved through the supervision of roller compaction parameters. The feasibility and robustness of the developed supervisory system are validated by a case study in the face rockfill dam of Shuibuya project in China. The practice shows that the system provides a new and effective method of process control for the construction quality of the roller compaction in dam engineering and realizes real-time, precision, and automatic supervising of roller compaction parameters and ensures better construction quality.

Operations and maintenance manual for the LDUA supervisory control and data acquisition system (LDUA System 4200) and control network (LDUA System 4400)

International Nuclear Information System (INIS)

Barnes, G.A.

1998-01-01

This document defines the requirements applicable to the operation, maintenance and storage of the Supervisory Control and Data Acquisition System (SCADAS) and Control Network in support of the Light Duty Utility Arm (LDUA) operations

The structure and operation scheme of an automatic and supervisory control system for KEPCO UPFC

Energy Technology Data Exchange (ETDEWEB)

Ahn, S.J.; Lee, D.W.; Moon, S.I. [Seoul National Univ., Seoul (Korea, Republic of). School of Electrical Engineering

2007-07-01

The structure and functions of a control system that can be used for automatic and supervisory control of a unified power flow controller (UPFC) was presented. A UPFC is a device used in power electronic based transmission to allow the independent control of active and reactive power flows as well as the simultaneous control of voltage profile. The Korea Electric Power Corporation (KEPCO) installed a {+-}80 MVA UPFC at the 154 kV Kangjin substation, operated in the Kangjin-Jangheung transmission line. The operation strategies used in both the normal state and emergency state were presented along with a scheme that includes the minimization of active power loss, coordination of voltage/Var control with an under load tap changer (ULTC), and better system security. Although this UPFC is operated by set-point control, it has some limitations, particularly in emergency events. In order to overcome the limitation of set-point control, this paper proposed the automatic and supervisory control system connected to a local SCADA for data exchange. The primary function of the system is to analyze the state of the power system, determine the control objectives and to calculate the optimal power flow. Details of each of these functions was described in this paper along with a detailed algorithm for each scheme. 5 refs., 6 figs.

78 FR 40351 - Procedural Rule To Establish Supervisory Authority Over Certain Nonbank Covered Persons Based on...

Science.gov (United States)

2013-07-03

... the construction of time limits, change of time limits, and effect of deadlines. Under the final rule... provides transparency and ensures consistency regarding the procedures that the Bureau intends to use in... above, the purpose of the final rule is to provide transparency and ensure consistency regarding the...

RTE - Business and sustainable development report 2015. Management report consolidated financial statements 2015. Report by the chairman of the supervisory board 2015

International Nuclear Information System (INIS)

2016-01-01

After an introduction by the RTE's CEO, brief presentations of governance bodies (management board, executive committee, supervisory board), and a presentation of some statistics illustrating RTE activities and efficiency, the activity report addresses and illustrates some specific issues: moving for local to European scale by promoting electrical solidarity among the regions, climate solutions in support of sustainable, economical and efficient power system, experts solutions for tomorrow's electricity. The management report contains financial and legal information (significant events of 2015, economic environment, business and results, financing, financial structure, outlook for 2016, risk analysis), company information (employment, work organisation, labour relations, health and safety, training, diversity and equal opportunities, compliance with International Labour Organisation conventions), environmental information (general environmental policy, pollution and waste management, sustainable use of resources, climate change, protection and development of biodiversity), and societal information (local, economic and social impact of RTE's business, relations with people and organisations concerned by RTE's business, out-sourcing and suppliers, fair practices, other action to promote human rights). The third report presents the governance organisation of RTE (supervisory board, executive board, principles of remuneration of supervisory board and executive board members, general meetings, information publication). It describes the internal control at RTE (organisation, actors), presents the policy of risk management and control, activities of audit and control within RTE. It finally presents external controls made by different public bodies

Midwives' supervisory styles and leadership role as experienced by Norwegian mothers in the context of a fear of childbirth.

Science.gov (United States)

Lyberg, Anne; Severinsson, Elisabeth

2010-05-01

The aim of the present study was to describe the midwives' supervisory style and leadership role as experienced by pregnant women and new mothers in the context of a fear of childbirth. A service led by midwives can influence the quality of care. The sample consisted of 13 mothers. Data were interpreted by means of qualitative content analysis. The findings revealed that the midwives' supervisory styles were related to their ability to create a trusting and caring relationship, demonstrate problem-solving capacity, and showing willingness, preparedness and courage to support the women. The midwives' leadership role was described as involving a crucial set of professional management skills and techniques. The findings have strengthened the argument for the provision of continuity of care to women who are afraid of childbirth. Further studies should focus more specifically on the implementation of research in practice. It is necessary for midwives to demonstrate leadership in order to develop practice, predict challenges and changes, provide different care delivery models and acquire an evidence base for care. This also demands systematic supervision to improve care outcomes.

Public service electric and gas company technical supervisory skills programs for nuclear power plant personnel

International Nuclear Information System (INIS)

Meredith, J.B.

1985-01-01

A series of training programs entitled Technical Supervisory Skills Programs for management personnel are described. The first level of this program, TSSP-1, is a seven week program designed for first-line supervisors and other selected management personnel responsible for directing the work forces in the stations. TSSP-1 includes training in PWR/BWR Technology, Supervision, Aberrant Behavior Identification, Labor Relations and Ethics, Technical Administration, Quality Assurance Program, On-the-job Training, and Specific Departmental Training. TSSP-2, TSSP-3, and TSSP-4 courses are described in this paper

Government regulation and associated innovations in building energy-efficiency supervisory systems for large-scale public buildings in a market economy

International Nuclear Information System (INIS)

Dai Xuezhi; Wu Yong; Di Yanqiang; Li Qiaoyan

2009-01-01

The supervision of energy efficiency in government office buildings and large-scale public buildings is the main embodiment for government implementation of Public Administration in the fields of resource saving and environmental protection. Aimed at improving the current situation of lack of government administration in building energy efficiency, this paper proposes the concept of 'change and redesign of governmental supervision in building energy efficiency', repositioning the role of government supervision. Based on this theory and other related theories in regulation economic and modern management, this paper analyzes and researches the action and function of all level governments in execution of the supervisory system of building energy efficiency in government office buildings and large-scale public buildings. This paper also defines the importance of government supervision in energy-efficiency system. Finally, this paper analyzes and researches the interaction mechanism between government and owners of different type buildings, government and energy-efficiency service institution with gambling as main features. This paper also presents some measurements to achieve a common benefit community in implementation of building energy-efficiency supervisory system.

Government regulation and associated innovations in building energy-efficiency supervisory systems for large-scale public buildings in a market economy

Energy Technology Data Exchange (ETDEWEB)

Dai Xuezhi [China Academy of Building Research, Beijing 100013 (China)], E-mail: daixz9999@126.com; Wu Yong [Ministry of Housing and Urban-Rural Development of the People' s Republic of China, Beijing 100835 (China); Di Yanqiang [China Academy of Building Research, Beijing 100013 (China); Li Qiaoyan [Department of Building, School of Design and Environment, National University of Singapore (Singapore)

2009-06-15

The supervision of energy efficiency in government office buildings and large-scale public buildings is the main embodiment for government implementation of Public Administration in the fields of resource saving and environmental protection. Aimed at improving the current situation of lack of government administration in building energy efficiency, this paper proposes the concept of 'change and redesign of governmental supervision in building energy efficiency', repositioning the role of government supervision. Based on this theory and other related theories in regulation economic and modern management, this paper analyzes and researches the action and function of all level governments in execution of the supervisory system of building energy efficiency in government office buildings and large-scale public buildings. This paper also defines the importance of government supervision in energy-efficiency system. Finally, this paper analyzes and researches the interaction mechanism between government and owners of different type buildings, government and energy-efficiency service institution with gambling as main features. This paper also presents some measurements to achieve a common benefit community in implementation of building energy-efficiency supervisory system.

Government regulation and associated innovations in building energy-efficiency supervisory systems for large-scale public buildings in a market economy

Energy Technology Data Exchange (ETDEWEB)

Dai, Xuezhi; Di, Yanqiang [China Academy of Building Research, Beijing 100013 (China); Wu, Yong [Ministry of Housing and Urban-Rural Development of the People' s Republic of China, Beijing 100835 (China); Li, Qiaoyan [Department of Building, School of Design and Environment, National University of Singapore (Singapore)

2009-06-15

The supervision of energy efficiency in government office buildings and large-scale public buildings is the main embodiment for government implementation of Public Administration in the fields of resource saving and environmental protection. Aimed at improving the current situation of lack of government administration in building energy efficiency, this paper proposes the concept of 'change and redesign of governmental supervision in building energy efficiency', repositioning the role of government supervision. Based on this theory and other related theories in regulation economic and modern management, this paper analyzes and researches the action and function of all level governments in execution of the supervisory system of building energy efficiency in government office buildings and large-scale public buildings. This paper also defines the importance of government supervision in energy-efficiency system. Finally, this paper analyzes and researches the interaction mechanism between government and owners of different type buildings, government and energy-efficiency service institution with gambling as main features. This paper also presents some measurements to achieve a common benefit community in implementation of building energy-efficiency supervisory system. (author)

Jüngere Tertiärsprachenlerner, gleiche Tertiärsprachenlehrerausbildung? Nachdenken über Anforderungen an die Ausbildung von norwegischen Fremdsprachenlehrern und -lehrerinnen für die Primarstufe (1.-7. Klasse

Directory of Open Access Journals (Sweden)

Beate Lindemann

2015-03-01

Full Text Available ie Erfahrungen von Probeläufen an zahlreichen norwegischen Grundschulen (1. - 7. Klasse in den letzten Jahren deuten darauf hin, dass man den Unterricht in der 2. Fremdsprache (nach Englisch als 1. Fremdsprache ab der 1. Klasse bereit s früher als bisher in der 8. Klasse anbieten sollte. Ein solcher “Früher Start” wiederum stellt gewi sse Anforderungen an die Fremdsprachenlehrerausbildung. Vor allem die typischen Bedürfnisse der jüngeren Lernenden in Sprachlernsituationen und die hohe sprachliche Kompetenz der Fremdsprachenlehrkraft müssen einen gewichtigen Platz einnehmen. Denn der frü he Unterricht in der 2. Fremdsprache trägt nicht nur dazu bei, schon früh die Sprachkenntnisse der SchülerInnen in der jeweiligen Sprache zu fördern, sondern legt auch eine wichtige Grundlage für die weitere Beschäftigung der SchülerInnen mit fremden Sprachen und Kulturen. Es bedarf deshalb e iner innovativen Fremdsprachenlehrerausbildung, die diesen Bedürfnissen Rechnung trägt.

A NEW CLOUD BASED SUPERVISORY CONTROL AND DATA ACQUISITION IMPLEMENTATION TO ENHANCE THE LEVEL OF SECURITY USING TESTBED

OpenAIRE

A. Shahzad; S. Musa; A. Aborujilah; M. Irfan

2014-01-01

Now days cloud computing is an important and hot topic in arena of information technology and computer system. Several companies and educational institutes have been deployed cloud infrastructures to overcome their problems such as easy data access, software updates with minimal cost, large or unlimited storage, efficient cost factor, backup storage and disaster recovery and several other benefits compare with the traditional network infrastructures. In this research paper; Supervisory Contro...

The Influence of Supervisor Multicultural Competence on the Supervisory Working Alliance, Supervisee Counseling Self-efficacy, and Supervisee Satisfaction with Supervision: A Mediation Model

Science.gov (United States)

Crockett, Stephanie; Hays, Danica G.

2015-01-01

We developed and tested a mediation model depicting relationships among supervisor multicultural competence, the supervisory working alliance, supervisee counseling self-efficacy, and supervisee satisfaction with supervision. Results of structural equation modeling showed that supervisor multicultural competence was related to the supervisory…

Influence of Head Teachers' General and Instructional Supervisory Practices on Teachers' Work Performance in Secondary Schools in Entebbe Municipality, Wakiso District, Uganda

Science.gov (United States)

Jared, Nzabonimpa Buregeya

2011-01-01

The study examined the Influence of Secondary School Head Teachers' General and Instructional Supervisory Practices on Teachers' Work Performance. Qualitative and qualitative methods with a descriptive-correlational research approach were used in the study. Purposive sampling technique alongside random sampling technique was used to select the…

Technology solutions to support supervisory activities and also to provide information access to the society

Science.gov (United States)

Paladini, D.; Mello, A. B.

2016-07-01

Inmetro's data about the conformity of certificated products, process and services are, usually, displayed at fragmented databases of difficult access for several reasons, for instance, the lack of computational solutions which allow this kind of access to its users. A discussion about some of the technological solutions to support supervisory activities by the appropriate regulatory bodies and also to provide information access to society in general is herein presented, along with a theoretical explanation of the pros and cons of such technologies to the conclusion that a mobile platform seems to be the best tool for the requirements of Inmetro.

A fuzzy quality function deployment approach to improve a component of a supervisory control and data acquisition system

OpenAIRE

Cristea Ciprian; Saşa Ciprian; Cristea Maria

2017-01-01

Monitoring and control of electric transformer stations, frequently spread out over small or large geographical areas, are achieved with supervisory control and data acquisition (SCADA). Quality function deployment (QFD) is a valuable analyzing tool in product design and development. To solve the uncertainty or inherent imprecision in QFD, many researchers have applied the fuzzy set theory to QFD and have developed various fuzzy QFD approaches. The literature regarding applying fuzzy QFD for ...

Computer-based supervisory control and data acquisition system for the radioactive waste evaporator

International Nuclear Information System (INIS)

Pope, N.G.; Schreiber, S.B.; Yarbro, S.L.; Gomez, B.G.; Nekimken, H.L.; Sanchez, D.E.; Bibeau, R.A.; Macdonald, J.M.

1994-12-01

The evaporator process at TA-55 reduces the amount of transuranic liquid radioactive waste by separating radioactive salts from relatively low-level radioactive nitric acid solution. A computer-based supervisory control and data acquisition (SCADA) system has been installed on the process that allows the operators to easily interface with process equipment. Individual single-loop controllers in the SCADA system allow more precise process operation with less human intervention. With this system, process data can be archieved in computer files for later analysis. Data are distributed throughout the TA-55 site through a local area network so that real-time process conditions can be monitored at multiple locations. The entire system has been built using commercially available hardware and software components

The Effects of an Equine Assisted Learning Supervision Intervention on Counselors'-in-Training Performance Anxiety, Counseling Self-Efficacy, and Supervisory Working Alliance

Science.gov (United States)

Meola, Cheryl C.

2017-01-01

Due to the complexity of the counseling process, counselors-in-training often experience performance anxiety when entering the counseling profession. Research shows that higher counseling self-efficacy (the belief in oneself to perform counseling skills successfully) helps decrease performance anxiety. Further, a strong supervisory working…

Traffic supervisory/control system for Kobe-Awaji- Naruto expressway of Honshu-Shikoku Bridge Authority; Honshu Shikoku Renrakukyo Kodan nonyu no Kobe Awaji Naruto jidoshado kotsu kansei shisetsu seigyo system

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Toshiba delivered the traffic supervisory/control system for Kobe-Awaji-Naruto expressway of Honshu-Shikoku Bridge Authority opened in May 1998. This traffic supervisory system rapidly exactly collects and services the information on the expressway of 89km including Akashi Kaikyo bridge and O-Naruto bridge. The facility control system totally efficiently maintains and controls various facilities for lighting and air circulation of tunnels on the expressway. The previous control system transmitted road information on traffic volume and traffic congestion to offices by using specific lines and terminals, while this system with a monitoring function using intranet can easily service such information by existing PCs. (translated by NEDO)

Traffic supervisory/control system for Kobe-Awaji- Naruto expressway of Honshu-Shikoku Bridge Authority. Honshu Shikoku Renrakukyo Kodan nonyu no Kobe Awaji Naruto jidoshado kotsu kansei shisetsu seigyo system

Energy Technology Data Exchange (ETDEWEB)

1999-03-01

Toshiba delivered the traffic supervisory/control system for Kobe-Awaji-Naruto expressway of Honshu-Shikoku Bridge Authority opened in May 1998. This traffic supervisory system rapidly exactly collects and services the information on the expressway of 89km including Akashi Kaikyo bridge and O-Naruto bridge. The facility control system totally efficiently maintains and controls various facilities for lighting and air circulation of tunnels on the expressway. The previous control system transmitted road information on traffic volume and traffic congestion to offices by using specific lines and terminals, while this system with a monitoring function using intranet can easily service such information by existing PCs. (translated by NEDO)

The independence of the Shari’a supervisory board in the Islamic financial institutions of the GCC countries

Directory of Open Access Journals (Sweden)

Samy Nathan Garas

2010-07-01

Full Text Available Islamic Financial Institutions (IFIs are governed by two boards: the Board of Directors (BoD and the Shari’a Supervisory Board (SSB. The SSB is a panel of Shari’a scholars who act independently from other governance organs. This paper discriminates between dependent SSBs and independent SSBs by using twenty one variables, which are classified into three groups: the implementation of governance best practices, the recruitment of SSB members, and the relationship between the SSB members and other governance organs. This study is one of the first studies that provide empirical results about the SSB independence. Nevertheless, the research focuses exclusively on the Gulf Cooperation Council (GCC countries and excludes the other countries where Shari’a supervision might have different forms. The study has developed a hypothesis, which was tested by a questionnaire. Data was collected from 76 Shari’a Supervisory Boards, 73 Boards of Directors, and 59 shareholders of IFIs in the GCC countries (Bahrain, Kuwait, Qatar, Saudi Arabia, and UAE during 2009. The discriminant analysis has been used in identifying both dependent and independent SSBs. The paper finds five variables relevant in discriminating the two groups. These variables are the incentives provided to the SSB; the average remuneration to the SSB members; the existence of the policy of penalties for violating the code of conduct; the relation between the SSB members and the BoD; and the role of executive management in recruiting SSB members.

Supervisory system to monitor the neutron flux of the IPR-R1 TRIGA research reactor at CDTN

International Nuclear Information System (INIS)

Pinto, Antonio Juscelino; Mesquita, Amir Zacarias; Tello, Cledola Cassia Oliveira

2009-01-01

The IPR-R1 TRIGA Mark I nuclear research reactor at the Nuclear Technology Development Center - CDTN (Belo Horizonte) is a pool type reactor. It was designed for research, training and radioisotope production. The International Atomic Energy Agency- IAEA - recommends the use of friendly interfaces for monitoring and controlling the operational parameters of nuclear reactors. This paper reports the activities for implementing a supervisory system, using LabVIEW software, with the purpose to provide the IPR-R1 TRIGA research reactor with a modern, safe and reliable system to monitor the time evolution of the power of its core. The use of the LabVIEW will introduce modern techniques, based on electronic processor and visual interface in video monitor, substituting the mechanical strip chart recorders (ink-pen drive and paper) that monitor the current neutrons flux, which is proportional to the thermal power supplied by reactor core. The main objective of the system will be to follow the evolution of the neutronic flux originated in the Linear and Logarithmic channels. A great advantage of the supervisory software nowadays, in relation to computer programs currently used in the facility, is the existence of new resources such as the data transmission and graphical interfaces by net, grid lines display in the graphs, and resources for real time reactor core video recordings. The considered system could also in the future be optimized, not only for data acquisition, but also for the total control of IPR-R1 TRIGA reactor(author)

Fostering employee service creativity: Joint effects of customer empowering behaviors and supervisory empowering leadership.

Science.gov (United States)

Dong, Yuntao; Liao, Hui; Chuang, Aichia; Zhou, Jing; Campbell, Elizabeth M

2015-09-01

Integrating insights from the literature on customers' central role in service and the literature on employee creativity, we offer theoretical and empirical account of how and when customer empowering behaviors can motivate employee creativity during service encounters and, subsequently, influence customer satisfaction with service experience. Using multilevel, multisource, experience sampling data from 380 hairstylists matched with 3550 customers in 118 hair salons, we found that customer empowering behaviors were positively related to employee creativity and subsequent customer satisfaction via employee state promotion focus. Results also showed that empowering behaviors from different agents function synergistically in shaping employee creativity: supervisory empowering leadership strengthened the indirect effect of customer empowering behaviors on employee creativity via state promotion focus. (c) 2015 APA, all rights reserved).

Development of Supervisory Control and Data Acquisition (SCADA) Electrical Supply in Malaysian Nuclear Agency

International Nuclear Information System (INIS)

Zainudin Jaafar; Mohd Ashhar Khalid; Mohd Hanafiah Chik

2015-01-01

Nuclear Power supplies in Malaysia supplied from the power utility company Tenaga Nasional Berhad through several substations before reaching the building and equipment. The power supply is received and passed down through the 11000 V high voltage switch gears to 415 V 3-phase or 1-phase 240 V. The equipment used in this process is dangerous and monitoring hardware operating remotely (remote) is the best as only guard machinery may engage in business operations. Similarly, the supply of electrical parameters should be monitored to ensure safe and continuous supply of and according to the appropriate voltage for record and analysis when needed. This paper discusses the monitoring and data acquisition is performed using the system 'Supervisory Control And Data Acquisition (SCADA) was developed. (author)

Consistent workforce management cuts the cost incurred for network maintenance, fault clearance, and other utility services; Konsequentes Einsatzmanagement senkt die Kosten im Servicebereich. Mehr Leistungen fuer weniger Geld

Energy Technology Data Exchange (ETDEWEB)

Zimmermann, M. [Deneg GmbH, Garbsen (Germany); Hillmann, G. [Tema Technologie Marketing AG, Berlin (Germany)

2003-02-10

The electric utilities and grid operators have to cope with a wide range of difficult, new challenges since the onset of electricity market liberalisation in 1998. The sometimes contradictory requirements of the customers or the legal regime can be managed only by a consistent optimization of procedures and operational processes in the service environment, as for example workforce management, order processing and execution. Workforce management is the particularly efficient approach at the organizational and service leve, which is demonstrated in the article. (orig./CB) [German] Alle Netzbetreiber sehen sich als Folge der Liberalisierung des Strommarktes seit 1998 erhoehten Anforderungen ausgesetzt. Diese sich teilweise widersprechenden Anforderungen sind aber nur durch eine Optimierung der Ablaeufe im Servicebereich bei Einsatzplanung, Auftragserfassung und -abwicklung zu bewaeltigen. Workforce Management ist das geeignete Hilfsmittel, um organisatorisch und technisch die Folgen der erforderlichen Einsparungen abzufangen und trotzdem die Qualitaet der Versorgung aufrecht zu erhalten, auch mit weniger Mitarbeitern. (orig./CB)

Competition compliant wholesale electricity prices. An examination of the regulation on the integrity and transparency of wholesale energy market; Wettbewerbskonforme Stromgrosshandelspreise. Eine Untersuchung der Verordnung ueber die Integritaet und Transparenz des Energiegrosshandelsmarkts

Energy Technology Data Exchange (ETDEWEB)

Konar, Selma

2015-07-01

The development of wholesale electricity prices showed in recent years a very fluctuating course. The starting point for ensuring competitive compliant electricity prices have uniform rules that establish effective competition in the overall wholesale electricity, ensure greater transparency in the market and prohibit market abuse influence exercised on the wholesale price. The REMIT regulation creates a first union-law rules to this standardized specifications. The volume first examines the transparency, competitiveness, and supervisory structures in the wholesale electricity before legislating a regulation. It is clear, as the transparency and supervisory structures should be designed from the wholesale electricity ideally. On this basis, the work is dealing with the REMIT regulation. The author works out to market participants relevant notification and publication requirements, the follow-up demands on the company as well as the now existing prohibitions on market abuse and the related penalty catalog and analyze the supervisory structures newly created in the wholesale electricity. Here, the work also identified the weaknesses of the regulation and shows suitable solution approaches. [German] Die Entwicklung der Stromgrosshandelspreise zeigte in den letzten Jahren einen sehr schwankenden Verlauf. Ausgangspunkt fuer die Gewaehrleistung wettbewerbskonformer Strompreise sind einheitliche Bestimmungen, die im gesamten Stromgrosshandel einen funktionierenden Wettbewerb etablieren, fuer mehr Transparenz am Markt sorgen und marktmissbraeuchliche Einflussnahmen auf den Grosshandelspreis verbieten. Die REMIT-Verordnung schafft als erstes unionsrechtliches Regelwerk hierzu einheitliche Vorgaben. Der Band untersucht zunaechst die Transparenz-, Wettbewerbs-, und Aufsichtsstrukturen im Stromgrosshandel vor Erlass der Verordnung. Dabei wird deutlich, wie die Transparenz- und Aufsichtsstrukturen im Stromgrosshandel idealerweise ausgestaltet sein sollten. Auf dieser Grundlage

Proposal for the award of a contract for the supply of a supervisory control and data acquisition system for the four LHC experiments

CERN Document Server

2000-01-01

This document concerns the award of a contract for the supply of a Supervisory Control and Data Acquisition (SCADA) system for the control of the four LHC experiments. Following a market survey carried out among 63 firms in thirteen Member States and one firm in Israel, a call for tenders (IT-2814/IT) was sent on 29 May 2000 to two firms and two consortia, each consisting of two firms, in four Member States. By the closing date, CERN had received four tenders from three firms and one consortium in three Member States. The Finance Committee is invited to agree to the negotiation of a contract with ETM (AT), the lowest bidder complying with the specification, for the supply of a Supervisory Control and Data Acquisition (SCADA) system for the control of the four LHC experiments, including consultancy services and training, for a total amount of 407 500 euros (634 000 Swiss francs), not subject to revision, and 10 years? maintenance for a total amount of 308 500 euros (480 000 Swiss francs), subject to annual rev...

Definition of a Robust Supervisory Control Scheme for Sodium-Cooled Fast Reactors

Energy Technology Data Exchange (ETDEWEB)

Ponciroli, R.; Passerini, S.; Vilim, R. B.

2016-04-17

In this work, an innovative control approach for metal-fueled Sodium-cooled Fast Reactors is proposed. With respect to the classical approach adopted for base-load Nuclear Power Plants, an alternative control strategy for operating the reactor at different power levels by respecting the system physical constraints is presented. In order to achieve a higher operational flexibility along with ensuring that the implemented control loops do not influence the system inherent passive safety features, a dedicated supervisory control scheme for the dynamic definition of the corresponding set-points to be supplied to the PID controllers is designed. In particular, the traditional approach based on the adoption of tabulated lookup tables for the set-point definition is found not to be robust enough when failures of the implemented SISO (Single Input Single Output) actuators occur. Therefore, a feedback algorithm based on the Reference Governor approach, which allows for the optimization of reference signals according to the system operating conditions, is proposed.

CDP - Adaptive Supervisory Control and Data Acquisition (SCADA) Technology for Infrastructure Protection

Energy Technology Data Exchange (ETDEWEB)

Marco Carvalho; Richard Ford

2012-05-14

Supervisory Control and Data Acquisition (SCADA) Systems are a type of Industrial Control System characterized by the centralized (or hierarchical) monitoring and control of geographically dispersed assets. SCADA systems combine acquisition and network components to provide data gathering, transmission, and visualization for centralized monitoring and control. However these integrated capabilities, especially when built over legacy systems and protocols, generally result in vulnerabilities that can be exploited by attackers, with potentially disastrous consequences. Our research project proposal was to investigate new approaches for secure and survivable SCADA systems. In particular, we were interested in the resilience and adaptability of large-scale mission-critical monitoring and control infrastructures. Our research proposal was divided in two main tasks. The first task was centered on the design and investigation of algorithms for survivable SCADA systems and a prototype framework demonstration. The second task was centered on the characterization and demonstration of the proposed approach in illustrative scenarios (simulated or emulated).

Towards energy efficient operation of Heating, Ventilation and Air Conditioning systems via advanced supervisory control design

Science.gov (United States)

Oswiecinska, A.; Hibbs, J.; Zajic, I.; Burnham, K. J.

2015-11-01

This paper presents conceptual control solution for reliable and energy efficient operation of heating, ventilation and air conditioning (HVAC) systems used in large volume building applications, e.g. warehouse facilities or exhibition centres. Advanced two-level scalable control solution, designed to extend capabilities of the existing low-level control strategies via remote internet connection, is presented. The high-level, supervisory controller is based on Model Predictive Control (MPC) architecture, which is the state-of-the-art for indoor climate control systems. The innovative approach benefits from using passive heating and cooling control strategies for reducing the HVAC system operational costs, while ensuring that required environmental conditions are met.

The new supervisory system of the ENEA'S TRIGA

International Nuclear Information System (INIS)

Bessenyei, Z.; Businaro, T.; Rabbani, M.I.

1986-01-01

The largest effect on the development of supervisory systems was caused by the TMI accident in 1979. Many-many regulation, testing and control requirements and operator aid systems have been born since that time. In the first phase fault model based systems were developed, but it has been turned out, the reality is more inventive, than the best fault model designer. In recent years the researchers' attention has turned to the supervision and diagnostic methods based on the comparison of the the behaviour of the plant and its model. This way is strongly supported by the exponential growth in the capability of the available computers. It is supposed that the description of the wanted behaviour of a plant is easier than gathering its possible disturbances and their consequences. The project on the ENEA's TRIGA supervisory system intends to solve the problems of a plant wide supervision. The new control room of the ENEA's TRIGA reactor will probably be realised in the second part of 1987. For information presentation and diagnostic purposes the multilevel flow modelling and the mimic method were chosen. The diagnostic concept of these two methods are process model based. Both of them have been planned to detect faults earlier than an accident occurs. Their way of information presentation is fundamentally different. The mimic version is an equipment oriented, symbolic, graphic method, where the components of the plant are represented by very simple graphic symbols, and the symbols are ordered into pictures, according to their real interconnections. Pictures with different detailness are interrelated in hierarchical order. The top picture contains the fully simplified technological scheme of the plant, with the most important variables. On the lowest level there are pictures of the equipments with their own descriptive variables. The color of the different parts of a picture gives qualitative information about the actual status of the plant, subsystems or equipments. The

Radiation safety supervisory system in Latvia and its role in prevention of unauthorised practices with radiation sources

International Nuclear Information System (INIS)

Eglajs, A.; Salmins, A.

2001-01-01

This report provides an overview of the practical and legal aspects of the use of radiation sources. The existing regulatory infrastructure is briefly analysed and proposed systems are described. The proposed interactions between the regulatory body and the advisory board are presented and some details about joint activities of different institutions concerning radiation safety are given. An implementation example of the supervisory system in combating illicit trafficking is analysed and the essential components in the prevention of illicit trafficking are assessed. Some findings of investigations are quoted regarding improvements in protection and prevention on the national and the international level. (author)

12 CFR 612.2165 - Policies and procedures.

Science.gov (United States)

2010-01-01

..., preserve the integrity and independence of the supervisory process, and prevent the improper use of... employees may purchase any real or personal property of a System institution acquired by such institution... demonstrating compliance with standards-of-conduct decisions and board policy; (12) Establish reporting...

A process evaluation of a supervisory development programme

Directory of Open Access Journals (Sweden)

Jasper Buys

2012-07-01

Research purpose: The study aimed to provide information about coverage, service delivery, organisational resources, and medium-term outcomes for a supervisory development programme (SDP in the hospitality industry. Motivation for the study: The primary motivation was to assist programme staff to understand their programme and also to generate information that the programme staff could use to reflect on the programme’s performance and future direction. Research design, approach and method: A mixture of quantitative and qualitative methods was employed, namely: a literature review; personal interviews; and internal programme documentation, such as e-mail correspondence, financial statements, attendance registers, and personnel records. Personal interviews were conducted with two stakeholders, namely the programme manager and programme administrator. The programme data of 69 participants in the SDP were utilised for the evaluation. Main findings: The evaluation’s main finding concluded that the ‘implemented programme’ was not congruent with the ‘planned programme’. Practical/managerial implications: It is recommended that programme activities and theory should be re-evaluated, as the programme is used mainly as a training programme for new appointees, rather than a management development programme to create a pool of potential supervisors. Programme uptake and output should also be closely aligned. The length of time that people in the pool of potential supervisors had to wait before they were appointed should also be reduced. Contribution/value-add: By explicating the basic programme theory and studying programme implementation, this evaluation serves as a starting point for future evaluations of the SDP.

Federal supervisory powers in administrative action on behalf of the Federal Government. Bundesaufsicht in der Bundesauftragsverwaltung

Energy Technology Data Exchange (ETDEWEB)

Tschentscher, T

1992-01-01

The Federal Government's authority to give instructions in matters of public administration pursuant to Art. 85 III GG has been gaining in significance over the last few years in the course of federal disputes about the licenses issued to the NUKEM company under atomic energy law, or about the licensing of the Kalkar fast breeder reactor. Proceeding from the above federal controversy about issues relating to atomic energy law, the author extends his study to the general constitutional level, investigating the provisions of the German constitution relating to the supervisory power and the authority to give instructions on the part of the Federal Government, and the rights and means of the Laender governments to defend their administrative rights. (orig.).

Investigation of crew performance in a multi-vehicle supervisory control task

Science.gov (United States)

Miller, R. A.; Plamondon, B. D.; Jagacinski, R. J.; Kirlik, A. C.

1986-01-01

Crew information processing and decision making in a supervisory control task which is loosely based on the mission of future generation helicopters is measured and represented. Subjects control the motion and activities of their own vehicle and direct the activities of four additional craft. The task involves searching an uncertain environment for cargo and enemies, returning cargo to home base and destroying enemies while attempting to avoid destruction of the scout and the supervised vehicles. A series of experiments with two-person crews and one-person crews were performed. Resulting crew performance was modeled with the objective of describing and understanding the information processing strategies utilized. Of particular interest are problem simplification strategies under time stress and high work load, simplification and compensation in the one-person cases, crew coordination in the two-person cases, and the relationship between strategy and errors in all cases. The results should provide some insight into the effective use of aids, particularly aids based on artificial intelligence, for similar tasks. The simulation is described which is used for the study and some preliminary results from the first two-person crew study are discussed.

A Safe Supervisory Flight Control Scheme in the Presence of Constraints and Anomalies

Directory of Open Access Journals (Sweden)

Franzè Giuseppe

2015-03-01

Full Text Available In this paper the hybrid supervisory control architecture developed by Famularo et al. (2011 for constrained control systems is adopted with the aim to improve safety in aircraft operations when critical events like command saturations or unpredicted anomalies occur. The capabilities of a low-computational demanding predictive scheme for the supervision of non-linear dynamical systems subject to sudden switchings amongst operating conditions and time-varying constraints are exploited in the flight control systems framework. The strategy is based on command governor ideas and is tailored to jointly take into account time-varying set-points/constraints. Unpredictable anomalies in the nominal plant behaviour, whose models fall in the category of time-varying constraints, can also be tolerated by the control scheme. In order to show the effectiveness of the proposed approach, simulations both on a high altitude performance demonstrator unmanned aircraft with redundant control surfaces and the P92 general aviation aircraft are discussed.

Corporate environmental information systems (CEIS). Standards und structural principles; Betriebliche Umweltinformationssysteme (BUIS). Anforderungen und struktureller Aufbau

Energy Technology Data Exchange (ETDEWEB)

Pflaum, H.; Guderian, J.; Kuemmel, R. [UMSICHT, Inst. fuer Umwelt-, Sicherheits- und Energietechnik e.V., Oberhausen (Germany)

1997-09-01

liegt zum einen daran, dass kein gesetzlicher Auftrag zur Implementierung eines BUIS besteht. Zum anderen existiert kaum eine konsensfaehige, theoretisch fundierte Definition fuer Anforderungen und strukturellen Aufbau eines BUIS. Dieses Problem hat dazu gefuehrt, dass in Unternehmen oft ueberstuerzt ineffiziente Inselloesungen implementiert werden. Vor dem Hintergrund eines praezisierten Anforderungsprofils an ein BUIS werden Betrachtungen zur Unternehmensumwelt, zum Zielsystem von Unternehmen und zur organisatorischen Einbindung von Umweltschutzaufgaben angestellt. Durch Operationalisierung in typische Funktionsbereiche koennen ein grobes Unternehmensmodell entwickelt, Informationsfluesse analysiert und umweltrelevante Informationen sowie ihre Wege selektiert werden. Aus diesen Grundlagen laesst sich die Systemarchitektur (Struktur und Organisation) fuer ein BUIS entwickeln, dessen praktische Umsetzung schliesslich durch einen Zehn-Punkte-Plan unterstuetzt wird. Dabei werden vorhandene EDV-Loesungen bewusst nicht beruecksichtigt, um die Allgemeingueltigkeit der Systemarchitektur sicherzustellen, Handlungsspielraeume zu schaffen und Kreativitaetspotentiale zu entdecken. Das vorgestellte Entwicklungskonzept fuer ein BUIS bedarf nun der Umsetzung in die betriebliche Praxis, d.h. der Anpassung, Ausfuellung und Verknuepfung von Systemelementen auf Grundlage unternehmensspezifischer Rahmenbedingungen. (orig.)

Supervisory System and Multivariable Control Applying Weighted Fuzzy-PID Logic in an Alcoholic Fermentation Process

Directory of Open Access Journals (Sweden)

Márcio Mendonça

2015-10-01

Full Text Available In this work, it is analyzed a multivariate system control of an alcoholic fermentation process with no minimum phase. The control is made with PID classic controllers associated with a supervisory system based on Fuzzy Systems. The Fuzzy system, a priori, send set-points to PID controllers, but also adds protection functions, such as if the biomass valued is at zero or very close. The Fuzzy controller changes the campaign to prevent or mitigate the paralyzation of the process. Three control architectures based on Fuzzy Control Systems are presented and compared in performance with classic control in different campaigns. The third architecture, in particular, adds an adaptive function. A brief summary of Fuzzy theory and correlated works will be presented. And, finally simulations results, conclusions and future works end the article.

Upward appraisal as a means for improving supervisory performance and promoting process improvement, with long-term implications for organizational change

Science.gov (United States)

Siegfeldt, Denise V.

1994-01-01

This study represents the implementation phase of an organizational development project which was initiated last year in the Management Support Division (MSD) at Langley Research Center to diagnose organizational functioning. As a result of MSD survey data from last year's effort, a Quality Action Team was created to address the responses compiled from the MSD Organizational Assessment Questionnaire and Follow-Up Questionnaire. The team was officially named the MSD Employee Relations Improvement Team (MERIT). MERIT's goal was to analyze major concerns generated by the questionnaires and to present feasible solutions to management which would improve supervisory performance, promote process improvement; and ultimately, lead to a better organization. The team met weekly and was very disciplined in following guidelines needed to ensure a fully functioning team. Several TQM tools were used during the team process, including brainstorming and the cause and effect diagram. One of the products produced by MERIT was a 'report card', more formally known as an upward appraisal system, to evaluate supervisory performance in the division office, its three branches, and in teams. Major areas of emphasis on the 47 item report card were those identified by employees through the previously administered questionnaires as needing to be improved; specifically, training, recognition, teamwork, supervision and leadership, and communication. MERIT created an enlarged and modified version of the report card which enabled scores for each individual supervisor to be recorded on a separate form, along with summary results and employee comments. Report card results have been compiled and fed back to the Division Chief and Assistant Division Chief. These individuals will in turn, feed the results back to the remaining supervisors and the team leaders. Although results differ among supervisors, some similarities exist. Communication generally appears to be adequate, which represents an

Balancing Human-machine Interface (HMI) Design in Complex Supervisory Tasks

International Nuclear Information System (INIS)

Ha, Junsu; Kim, Arryum; Jang, Inseok; Seong, Poonghyun

2013-01-01

Human performance aspects such as plant performance, personnel task performance, situation awareness, cognitive workload, teamwork, and anthropomorphic/physiological factor are evaluated with the HUPESS. Even though the HUPESS provides evaluation results in each of the performance aspects for the integrated system validation (ISV), additional researches have been needed to develop methods on how to find out design deficiency leading to poor performance and give a solution for design improvement in HMI. The authors have developed a method of HMI design improvement for the monitoring and detection tasks which was named as 'DEMIS (Difficulty Evaluation Method in Information Searching)'. The DEMIS is a HMI evaluation method which bridge poor performance and design improvement. Lessons learned from the existing studies lead to a question about how to optimize the whole HMI design. Human factors principles provide the foundation for guidelines of various codes and standards in designing HMIs. Also in NPPs, a lot of guidelines directly from various codes and standard and derived from various research and development projects are available for designing MCR HMIs. In this study, a balancing principle and relevant two measures for HMI design optimization are proposed to be used in the HMI design of complex supervisory tasks in NPPs. The balancing principle is that a HMI element (e. g., an indicator or a push button) should be designed according to its importance

Balancing Human-machine Interface (HMI) Design in Complex Supervisory Tasks

Energy Technology Data Exchange (ETDEWEB)

Ha, Junsu [Khalifa Univ. of Science, Abu Dhabi (United Arab Emirates); Kim, Arryum; Jang, Inseok; Seong, Poonghyun [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of)

2013-05-15

Human performance aspects such as plant performance, personnel task performance, situation awareness, cognitive workload, teamwork, and anthropomorphic/physiological factor are evaluated with the HUPESS. Even though the HUPESS provides evaluation results in each of the performance aspects for the integrated system validation (ISV), additional researches have been needed to develop methods on how to find out design deficiency leading to poor performance and give a solution for design improvement in HMI. The authors have developed a method of HMI design improvement for the monitoring and detection tasks which was named as 'DEMIS (Difficulty Evaluation Method in Information Searching)'. The DEMIS is a HMI evaluation method which bridge poor performance and design improvement. Lessons learned from the existing studies lead to a question about how to optimize the whole HMI design. Human factors principles provide the foundation for guidelines of various codes and standards in designing HMIs. Also in NPPs, a lot of guidelines directly from various codes and standard and derived from various research and development projects are available for designing MCR HMIs. In this study, a balancing principle and relevant two measures for HMI design optimization are proposed to be used in the HMI design of complex supervisory tasks in NPPs. The balancing principle is that a HMI element (e. g., an indicator or a push button) should be designed according to its importance.

PENINGKATAN KEAMANAN SUPERVISORY CONTROL AND DATA ACQUISITION (SCADA PADA SMART GRID SEBAGAI INFRASTRUKTUR KRITIS

Directory of Open Access Journals (Sweden)

Ahmad Budi Setiawan

2016-10-01

Full Text Available SCADA (Supervisory Control and Data Acquisition systems as the control unit of the smart grid has been used in almost various industries around the world in terms of automation systems. Smart grid technology combines the energy infrastructure and telecommunications and Internet networks. The system provides the operational ease and efficiency in the industry. However, the system has a lot of vulnerabilities in information security aspects that can have a major impact for the industry and even the economy. This study tried to design in building a smart grid cyber security, it includes the strategies that must be done and the information security system architecture to be built. The study was conducted qualitative in-depth interviews, focus group discussions and direct observation. Results of this research is the design strategy recommendations ddalam development of smart grid cyber security. Recommendation results of this study also intended as a suggestion-making framework for smart grid cyber security as a reference implementation of the smart grid in Indonesia.

Perancangan Sistem Pemantauan Pengendali Suhu pada Stirred Tank Heater menggunakan Supervisory Control and Data Acquisition (SCADA

Directory of Open Access Journals (Sweden)

Ike Bayusari

2013-04-01

Full Text Available This paper discusses design of a suhue control monitoring system in stirred tank heater system that has an important function in industrial processes. Monitoring of suhue control system in stirred tank heater is designed using Supervisory Control and Data Acquisition (SCADA that control function of industrial processes. While the actuator to be controlled is the position of burner openings, so that the heat can be adjusted to meet a predetermined set-point. The suhue controller that is also used as a Remote Terminal Unit (RTU is Programmable Logic Controller (PLC. The testing result showed on SCADA system was quite good, where the average percentage of deviation for testing of set-point data was 0.76687%, and the percentage of deviation for testing of suhue data was 0.082%.

Development of a First-of-a-Kind Deterministic Decision-Making Tool for Supervisory Control System

Energy Technology Data Exchange (ETDEWEB)

Cetiner, Sacit M [ORNL; Kisner, Roger A [ORNL; Muhlheim, Michael David [ORNL; Fugate, David L [ORNL

2015-07-01

Decision-making is the process of identifying and choosing alternatives where each alternative offers a different approach or path to move from a given state or condition to a desired state or condition. The generation of consistent decisions requires that a structured, coherent process be defined, immediately leading to a decision-making framework. The overall objective of the generalized framework is for it to be adopted into an autonomous decision-making framework and tailored to specific requirements for various applications. In this context, automation is the use of computing resources to make decisions and implement a structured decision-making process with limited or no human intervention. The overriding goal of automation is to replace or supplement human decision makers with reconfigurable decision- making modules that can perform a given set of tasks reliably. Risk-informed decision making requires a probabilistic assessment of the likelihood of success given the status of the plant/systems and component health, and a deterministic assessment between plant operating parameters and reactor protection parameters to prevent unnecessary trips and challenges to plant safety systems. The implementation of the probabilistic portion of the decision-making engine of the proposed supervisory control system was detailed in previous milestone reports. Once the control options are identified and ranked based on the likelihood of success, the supervisory control system transmits the options to the deterministic portion of the platform. The deterministic multi-attribute decision-making framework uses variable sensor data (e.g., outlet temperature) and calculates where it is within the challenge state, its trajectory, and margin within the controllable domain using utility functions to evaluate current and projected plant state space for different control decisions. Metrics to be evaluated include stability, cost, time to complete (action), power level, etc. The

Report on the experience with the Supervisory Control and Diagnostics System (SCDS) of MFTF-B

International Nuclear Information System (INIS)

Wyman, R.H.

1983-01-01

The Supervisory Control and Diagnostics System (SCDS) of MFTF is a multiprocessor computer system using graphics oriented displays with touch sensitive panels as the primary operator interface. Late in the calendar year 1981 the system was used to control an integrated test of the vacuum vessel, vacuum system, cryogenics system and the superconducting magnet of MFTF. Since the completion of those tests and starting in early calendar 1983 the system has been used for control of the neutral beam test facility at LLNL. This paper presents a short overview of SCDS for the purpose of orientation and then proceeds to describe the difficulties encountered in these preliminary encounters with reality. The band-aids used to hold things together as disaster threatened as well as the long-term solutions to the problems will be discussed. Finally, we will present some comments on system costs and management philosophy

Supervisory control and diagnostics system for the mirror fusion test facility: overview and status 1980

International Nuclear Information System (INIS)

McGoldrick, P.R.

1981-01-01

The Mirror Fusion Test Facility (MFTF) is a complex facility requiring a highly-computerized Supervisory Control and Diagnostics System (SCDS) to monitor and provide control over ten subsystems; three of which require true process control. SCDS will provide physicists with a method of studying machine and plasma behavior by acquiring and processing up to four megabytes of plasma diagnostic information every five minutes. A high degree of availability and throughput is provided by a distributed computer system (nine 32-bit minicomputers on shared memory). Data, distributed across SCDS, is managed by a high-bandwidth Distributed Database Management System. The MFTF operators' control room consoles use color television monitors with touch sensitive screens; this is a totally new approach. The method of handling deviations to normal machine operation and how the operator should be notified and assisted in the resolution of problems has been studied and a system designed

Supervisory Management in the Water/Wastewater Field: Self-Study Program. Revised Second Edition. Instructor Manual. Executive Programs of the Graduate School of Business Administration of Michigan State University.

Science.gov (United States)

Liebrenz, Marilyn L., Ed.

This document is the instructor's manual for a course on supervisory management as it relates to the water or wastewater treatment field. Each of the seven modules is concerned with a segment of the management/supervision process and corresponds to reading material in an accompanying text. An objective and subjective test portion is included with…

Decisions in licensing and plan approval procedures, investigated from the viewpoint of legal reservation

International Nuclear Information System (INIS)

Boerger, M.

1987-01-01

Starting from the basic idea that also in the field of environmental law, (constitutional) system immanent problem solution is possible only after basic constitutional questions have been clarified, this study in hand is an attempt towards defining the constitutional approach for an adequate use of the various types of action of the executive in the procedures for approval and licensing of privately owned plant or equipment. The study goes into the problems encountered with the legal reservation with regard to licensing and plan approval decisions. The basic types of action of the executive are subdivided according to intent, i.e. assigned to the supervisory or the planning intents, and are examined for a possible scope of discretion opened up for the administration. The decisive question in this context is the scope of action that may be given to the administration by the legislation, and to what extent such 'freedom' will stand the acceptance test by the courts. (orig./HSCH) [de

STABLE ADAPTIVE CONTROL FOR A CLASS OF NONLINEAR SYSTEMS WITHOUT USE OF A SUPERVISORY TERM IN THE CONTROL LAW

Directory of Open Access Journals (Sweden)

MOHAMED BAHITA

2012-02-01

Full Text Available In this paper, a direct adaptive control scheme for a class of nonlinear systems is proposed. The architecture employs a Gaussian radial basis function (RBF network to construct an adaptive controller. The parameters of the adaptive controller are adapted and changed according to a law derived using Lyapunov stability theory. The centres of the RBF network are adapted on line using the k-means algorithm. Asymptotic Lyapunov stability is established without the use of a supervisory (compensatory term in the control law and with the tracking errors converging to a neighbourhood of the origin. Finally, a simulation is provided to explore the feasibility of the proposed neuronal controller design method.

Assessing mental workload and situation awareness in the evaluation of computerized procedures in the main control room

Energy Technology Data Exchange (ETDEWEB)

Yang, Chih-Wei, E-mail: yangcw@iner.gov.tw [Institute of Nuclear Energy Research, 1000, Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China); Yang, Li-Chen; Cheng, Tsung-Chieh [Institute of Nuclear Energy Research, 1000, Wenhua Rd., Jiaan Village, Longtan Township, Taoyuan County 32546, Taiwan (China); Jou, Yung-Tsan; Chiou, Shian-Wei [Department of Industrial Engineering, Chung-Yuan Christian University, 200, Chung Pei Rd., Chung-Li 32023, Taiwan (China)

2012-09-15

Highlights: Black-Right-Pointing-Pointer This study investigates procedure types' effects on operators' performance. Black-Right-Pointing-Pointer The computer-based procedure is suggested to be implemented in the main control room. Black-Right-Pointing-Pointer The computer-based procedure brings lowest mental workload. Black-Right-Pointing-Pointer And it also generates fewer error of omission, and the highest situation awareness. Black-Right-Pointing-Pointer The shift supervisor has the highest workload and the lowest situation awareness. - Abstract: Computerized procedure (CP) system has been developed in nuclear power plant (NPP) instrumentation and control (I and C) system. The system may include normal operating procedures (OPs), abnormal operating procedures (AOPs), alarm response procedures (ARPs), surveillance test procedures (STPs) and/or emergency operating procedures (EOPs). While there are many ways to evaluate computerized procedures design, the user's mental workload and situation awareness (SA) are particularly important considerations in the supervisory control of safety-critical systems. Users' mental workload and situation awareness may be influenced by human factor issues relating to computerized procedures, e.g., level of automation, dealing with (partially) unavailable I and C, switching to back-up system (e.g., paper-based procedures). Some of the positive impacts of CPs on operator performance include the following: tasks can be performed more quickly; overall workload can be reduced; cognitive workload can be minimized; fewer errors may be made in transitioning through or between procedures. However, various challenges have also been identified with CP systems. These should be addressed in the design and implementation of CPs where they are applicable. For example, narrower 'field of view' provided by CP systems than with paper-based procedures could reduce crew communications and crewmember awareness of the

Assessing mental workload and situation awareness in the evaluation of computerized procedures in the main control room

International Nuclear Information System (INIS)

Yang, Chih-Wei; Yang, Li-Chen; Cheng, Tsung-Chieh; Jou, Yung-Tsan; Chiou, Shian-Wei

2012-01-01

Highlights: ► This study investigates procedure types’ effects on operators’ performance. ► The computer-based procedure is suggested to be implemented in the main control room. ► The computer-based procedure brings lowest mental workload. ► And it also generates fewer error of omission, and the highest situation awareness. ► The shift supervisor has the highest workload and the lowest situation awareness. - Abstract: Computerized procedure (CP) system has been developed in nuclear power plant (NPP) instrumentation and control (I and C) system. The system may include normal operating procedures (OPs), abnormal operating procedures (AOPs), alarm response procedures (ARPs), surveillance test procedures (STPs) and/or emergency operating procedures (EOPs). While there are many ways to evaluate computerized procedures design, the user's mental workload and situation awareness (SA) are particularly important considerations in the supervisory control of safety-critical systems. Users’ mental workload and situation awareness may be influenced by human factor issues relating to computerized procedures, e.g., level of automation, dealing with (partially) unavailable I and C, switching to back-up system (e.g., paper-based procedures). Some of the positive impacts of CPs on operator performance include the following: tasks can be performed more quickly; overall workload can be reduced; cognitive workload can be minimized; fewer errors may be made in transitioning through or between procedures. However, various challenges have also been identified with CP systems. These should be addressed in the design and implementation of CPs where they are applicable. For example, narrower “field of view” provided by CP systems than with paper-based procedures could reduce crew communications and crewmember awareness of the status and progress through the procedure. Based on a human factors experiment in which each participant monitored and controlled multiple simulated

The corporate governance in Uzbekistan: A special focus on the board’s supervisory role compared with German practice

Directory of Open Access Journals (Sweden)

Zufar Ashurov

2014-11-01

Full Text Available Today, the topic of corporate governance has become vital for the most researches and scientific controversies. The corporate governance is now playing a key role in economic and social development of a country, and it has began to significantly matter for both industrialized and most of the developing countries. In the meantime, little is known for the world community about the state and problems of corporate governance in Uzbekistan. In this regard, in this paper we mainly address the present situation in Uzbek corporate governance as well as, as a special focus, make comparison of the Uzbek and German board’s supervisory role practices. This paper may be interesting for those who are not aware of the corporate governance in Uzbekistan and who would like to more or less know about it.

WHAT WAS THE ROLE OF THE SUPERVISORY COMMITTEE RECOMMENDATIONS FOR CREDIT INSTITUTIONS AND THE REQUIREMENTS OF BASEL III

Directory of Open Access Journals (Sweden)

MEDAR LUCIAN-ION

2010-12-01

Full Text Available The economic downturn and financial crisis has negative impacted the European banking system, which determined the Basel Committee on Banking Supervision, after the implementation of "Basel I and Basel II", to conduct a new series of recommendations. The economic crisis has affected all types banking products and services, all models of supervision and all evaluation methods known. Credit institutions innovations, on the ease of promoting new products and services, absence amid of high quality capital who can absorb losses in the limit of liquidity, led to a deadlock on lending activity. Supervisory Committee appointed by the new "Basel III" recommendations, requires the introduction of minimum global standards for measuring and monitoring liquidity risk and also requires banks to triple quality capital reserve by 2015-2019, up to a 7% capital adequacy.

Non-linear model predictive supervisory controller for building, air handling unit with recuperator and refrigeration system with heat waste recovery

DEFF Research Database (Denmark)

Minko, Tomasz; Wisniewski, Rafal; Bendtsen, Jan Dimon

2016-01-01

. The retrieved heat excess can be stored in the water tank. For this purpose the charging and the discharging water loops has been designed. We present the non-linear model of the above described system and a non-linear model predictive supervisory controller that according to the received price signal......, occupancy information and ambient temperature minimizes the operation cost of the whole system and distributes set points to local controllers of supermarkets subsystems. We find that when reliable information about the high price period is available, it is profitable to use the refrigeration system...... to generate heat during the low price period, store it and use it to substitute the conventional heater during the high price period....

Das erweiterte X-in-the-Loop-Framework zur durchgängigen Integration von Optimierungsverfahren in den Produktentwicklungsprozess am Beispiel der Entwicklung energieeffizienter Fahrzeuge = The advanced X-in-the-Loop-Framework for continuous integration of optimization procedures into the product development process using examples of the development of fuel efficient vehicles

OpenAIRE

Schröter, Jens

2013-01-01

Die Anforderungen an die Individualmobilität steigen weiter an: So erwartet der Konsument innovative Fahrzeuge - bei gleichbleibenden Kosten. Gleichzeitig muss gesetzesinduziert die Abgasemission weiter reduziert und im Hinblick auf die schwindenden Ressourcen der Kraftstoffverbrauch gesenkt werden. Deshalb wird in der vorliegenden Arbeit das erweiterte X-in-the-Loop-Framework zur durchgängigen Integration von Optimierungsverfahren in den Produktentwicklungsprozess entwickelt und validiert.

Autocommander: A Supervisory Controller for Integrated Guidance and Control for the 2nd Generation Reusable Launch Vehicle

Science.gov (United States)

Fisher, J. E.; Lawrence, D. A.; Zhu, J. J.; Jackson, Scott (Technical Monitor)

2002-01-01

This paper presents a hierarchical architecture for integrated guidance and control that achieves risk and cost reduction for NASA's 2d generation reusable launch vehicle (RLV). Guidance, attitude control, and control allocation subsystems that heretofore operated independently will now work cooperatively under the coordination of a top-level autocommander. In addition to delivering improved performance from a flight mechanics perspective, the autocommander is intended to provide an autonomous supervisory control capability for traditional mission management under nominal conditions, G&C reconfiguration in response to effector saturation, and abort mode decision-making upon vehicle malfunction. This high-level functionality is to be implemented through the development of a relational database that is populated with the broad range of vehicle and mission specific data and translated into a discrete event system model for analysis, simulation, and onboard implementation. A Stateflow Autocoder software tool that translates the database into the Stateflow component of a Matlab/Simulink simulation is also presented.

Automation of the procedures for changing course and balancing in sucker-rod pumping units; Automacao dos procedimentos de mudanca de curso e balanceamento em unidades de bombeio mecanico

Energy Technology Data Exchange (ETDEWEB)

Quintaes, Filipe de O.; Souza, Leonardo F.; Salazar, Andres O.; Maitelli, Andre L.; Fontes, Francisco de Assis O. [Universidade Federal do Rio Grande do Norte (UFRN), Natal, RN (Brazil). Dept. de Engenharia Eletrica; Karbage, Elias; Costa, Rutacio de O. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2008-07-01

The main advantages of the use of the method of artificial lift of Sucker-rod Pumping are: operation simplicity, it can be used until the end of the productive life of a well starting from normal conditions, capacity of pump can be modified in function of the changes of behavior of the well and usually presents a smaller cost for production along the productive life of the well. Even having the smallest cost for production, these units need maintenance procedures periodically. Two important procedures very used at Sucker-rod Pumping are the adjusts for balancing of the unit and the change of course, however, these procedures presents great operational problems. This work presents an automation project for the accomplishment of the procedures of balancing and change of course. Among some of the advantages of this new system, we have: stop of the unit at any position without damages to the reducer; reduction of the consumption of energy in direct transmission; possibility of integration with a supervisory system; reduction of operation costs and maintenance and facility of maintenance. By this automation, the productions stops will be reduced and with possibility of the elimination of the technicians' intervention. At this way, the risks and the operation costs and maintenance will be reduced. (author)

Low-Cost Control System Built Upon Consumer-Based Electronics For Supervisory Control Of A Gas-Operated Heat Pump

Energy Technology Data Exchange (ETDEWEB)

Wetherington Jr, G Randall [ORNL; Vineyard, Edward Allan [ORNL; Mahderekal, Isaac [ORNL; Abu-Heiba, Ahmad [ORNL

2017-06-01

A preliminary evaluation of the performance of a consumer-based control system was conducted by the Oak Ridge National Laboratory (ORNL) and Southwest Gas as part of a cooperative research and development agreement (CRADA) authorized by the Department of Energy (DOE) (Mahderekal et al. (2013). The goal of the research was to evaluate the low-cost approach as a solution for implementing a supervisory control system for a residential gas-operated heat pump. The design incorporated two consumer-based micro-controllers; the Arduino Mega-2650 and the BeagleBone (white). Ten five-ton heat pump systems were designed, fabricated, and operationally tested in the Las Vega NV region. A robust data set was produced that allowed detailed assessment of the reliability and the operational perfromance of the newly developed control system. Experiences gained from the test provided important points of improvement for subsequent evolution of the heat pump technology.

Measures taken by the supervisory authority to reduce extremity doses in nuclear medicine facilities in Switzerland

International Nuclear Information System (INIS)

Stritt, Nicolas; Linder, Reto

2011-01-01

In its capacity as the supervisory authority, the Swiss Federal Office of Public Health (SFOPH) has responded to the increase in extremity doses observed in nuclear medicine facilities in Switzerland over the past decade by introducing facility-specific radiation protection audits. These audits have raised the awareness of the staff members concerned with the problem of high extremity doses which arise from handling beta emitters and PET nuclides and prevented any further rise in the extremity doses. However, the evaluation of these audits has also shown that there is still considerable scope for improvement in terms of reducing extremity doses and that further measures are therefore required. Facility-specific and person-specific investigations are currently being conducted with the support of the SFOPH. Their aim is to show facilities which operations during the preparation and application of diagnostic and therapeutic radiopharmaceuticals lead to high extremity doses. This will enable the reduction of extremity doses for nuclear medicine staff as well as ensure that the dose limits are adhered to, in spite of the increasing numbers of examinations.

Elevator Group Supervisory Control System Using Genetic Network Programming with Macro Nodes and Reinforcement Learning

Science.gov (United States)

Zhou, Jin; Yu, Lu; Mabu, Shingo; Hirasawa, Kotaro; Hu, Jinglu; Markon, Sandor

Elevator Group Supervisory Control System (EGSCS) is a very large scale stochastic dynamic optimization problem. Due to its vast state space, significant uncertainty and numerous resource constraints such as finite car capacities and registered hall/car calls, it is hard to manage EGSCS using conventional control methods. Recently, many solutions for EGSCS using Artificial Intelligence (AI) technologies have been reported. Genetic Network Programming (GNP), which is proposed as a new evolutionary computation method several years ago, is also proved to be efficient when applied to EGSCS problem. In this paper, we propose an extended algorithm for EGSCS by introducing Reinforcement Learning (RL) into GNP framework, and an improvement of the EGSCS' performances is expected since the efficiency of GNP with RL has been clarified in some other studies like tile-world problem. Simulation tests using traffic flows in a typical office building have been made, and the results show an actual improvement of the EGSCS' performances comparing to the algorithms using original GNP and conventional control methods. Furthermore, as a further study, an importance weight optimization algorithm is employed based on GNP with RL and its efficiency is also verified with the better performances.

Access of vehicles to DB netz infrastructure; Zugang von Fahrzeugen zur DB-Netz-Infrastruktur

Energy Technology Data Exchange (ETDEWEB)

Resch, U. [DB Systemtechnik, Frankfurt am Main (Germany); Ruch, M. [DB Energie GmbH, Frankfurt am Main (Germany)

2003-05-01

For line access it is necessary to take into account and observe the requirements of the infrastructure. The requirements and certifications for the power supply system and pantograph-overhead contact line interaction are described in the DB guidelines 810.0241 and 810.0242. (orig.) [German] Fuer den Netzzugang muessen die Anforderungen der Infrastruktur beachtet und eingehalten werden. Die Anforderungen und die erforderlichen Nachweise fuer den Bereich Energieversorgung und Zusammenwirken von Stromabnehmer und Oberleitung sind in den Richtlinien 810.0241 und 810.0242 der DB enthalten. (orig.)

Digitales Peer-Tutoring - Explorative Analyse eines Peer-Video-Tutoring auf YouTube

OpenAIRE

Lebedynska, Viktoriya

2016-01-01

Als eine der erfolgreichsten und empirisch gut erforschten Methoden ist das Peer-Tutoring in den pädagogischen Kreisen äußerst beliebt. Neue organisatorische Anforderungen an Schule, wie die Einführung von G8 und die steigende Erwerbstätigkeit beider Elternteile, sowie neue didaktische Anforderungen, wie etwa Inklusion, eröffnen neue Möglichkeiten und Potentiale für den Einsatz des Peer-Tutoring. Die vorliegende Arbeit hat die Bearbeitung zweier Schwerpunkte zum Ziel. Zunächst wird das kla...

Design on human supervisory control of safety management for advance NPP

International Nuclear Information System (INIS)

Nugroho, D.H.; Soentono, S.; Taryo, T.; Wahyon, P.I.

2006-01-01

Full text: Full text: Characteristics of an advance NPP related with economic and safety enhancement was represented on capabilities in intelligent control and diagnostic to provide nearly autonomous operation with anticipatory maintenance. An autonomous control system should enable automatic operation while adapting to component faults and system variable upsets. It needs therefore to have many intelligent capabilities, such as modeling, analysis, self-validation, diagnosis and decision. This paper describes a human supervisory control design for nuclear reactor fault management which collaborates between human and autonomous control. The beneficial of collaboration is provided based on belief of information value evaluated from Dempster's rule of evidence. The belief of the collaboration is better compared with single usage. The collaboration was conducted in which agent will autonomously and periodically be conducting surveillance by checking the component abnormalities in the plant if anomalies occur. The anomalies were determined using fault detection module. Thereby the system will be able to conduct preventive maintenance. In the situation of accident happened, hence the system will diagnose to determine the location of component failure autonomously. A human supervisor will then determine the action of decison making based on the prediction result. The decision making will be conducted based on the 4th Sheridan's autonomous level in which the autonomous control will execute the duty autonomously when the plant is in normal condition, or in the predictable accident range. But if the unpredictable accident occurs in the plant, the supervisor will then take over the role to control the plant, and the machine will do what commanded by the supervisor. Sistematically, the system explained before was represented by Traveling Salesman Problem-based surveillance, modified ART-2 artificial neural networks-based fault detection and Bayesian Networks-based fault

The Process towards the Centralisation of the European Financial Supervisory Architecture: The Case of the Banking Union

Directory of Open Access Journals (Sweden)

Elisabetta Montanaro

2016-06-01

Full Text Available The evolution of the EU supervisory architecture has demonstrated that it took the risk of a euro break-up to barely overcome the Member States and their supervisors’ political resistances to centralisation. In the two-tier Europe that is emerging after the euro crisis, the integrity of the single market seems today crucially interlinked with the success of the banking union and its attractiveness for non-euro countries. The banking union’s design, without a credible common fiscal backstop, remains however a partial solution to the financial stability issues arising from the fragmentation of the EU financial market in the event of banking crises. Against this background, this work performs an analysis on non-euro countries’ own assessments of the pros and cons of joining the banking union. The analysis aims at showing that until fiscal responsibility for financial stability remains at the national level, regulatory centralisation cannot sever the traditional divide between home and host supervisors. JEL: F35; F65; G01; G28

The calibration procedures in the Studsvik standardized personnel dosimetry system

International Nuclear Information System (INIS)

Widell, C.O.

1978-01-01

Every large nuclear installation in Sweden reads its own personnel TLDs. In order to supervise this decentralized reading of dose meters, the TLD readers are connected by telephone lines to a central computer for dose registration. This computer is used both for registering the personnel doses and for checking the TLD readers. This checking is performed by the use of pre-irradiated calibration dose meters which are always used when a batch of personnel dose meters are read. The pre-irradiated dose meters are either irradiated using 137 Cs to various doses up to 100mSv(10000mrem) or using a 90 Sr source in a reference dose irradiator to a dose equal to 3mSv(300mrem) from a 137 Cs source. The results from the reading of the pre-irradiated dose meters are processed by the computer and a calibration factor is calculated. The calibration factor is automatically used to calculate the doses to the personnel TLD's. However, if the calibration factor deviates by more than 10% from the previously used factor, this fact is shown to the operator - who then has to decide what calibration factor is going to be used. This calibration and supervisory procedure together with the safety interlocks in the TLD readers has resulted in a very reliable and accurate dosimetry system. (author)

EL SISTEMA ATENCIONAL SUPERVISOR Y LA TEORÍA ELIMINATIVISTA O EL PROBLEMA DE LA VOLUNTAD -- THE SUPERVISORY ATTENTIONAL SYSTEM AND THE ELIMINATIVISM OR THE PROBLEM OF THE WILL

Directory of Open Access Journals (Sweden)

LEONARDO FRANCISCO BARÓN BIRCHENALL

2008-06-01

Full Text Available The model of working memory by Alan Baddeley (that includes the Supervisory Attention System and the eliminativist arguments by Richard Rorty, are both related to cognitive psychology, present distinct and unequal conceptions regarding to the human will and capacity to decide. In this article are drawn the two theories, and reflect to the nature and of its contradiction. Besides there is a possible fundamental methodical basis for the study of the will, based in one of the most well-known cases in neuropsychological study, the one of the amnesic patient H.M.

LEGAL PROTECTION FOR CONSUMER OF UNLICENCED VAPOR FROM DRUG AND FOOD SUPERVISORY AGENCY

Directory of Open Access Journals (Sweden)

Dedhi Bima Samudra

2018-04-01

Full Text Available Abstract This research begins with the number of liquid vapor that is not licensed BPOM spread in Indonesia, and there is no clear law for liquid vapor, so there is no clarity from legal protection against liquid vapor consumers who are not licensed from  BPOM. Therefore, in this research, there is the formulation of the problem as follows: Is there a legal protection against liquid vapor consumers who are not licensed from BPOM?. The purpose of this research to determine whether there is legal protection against liquid vapor consumers who are not licensed BPOM. So this research can be useful for subsequent research that has the same theme and beneficial to researchers, liquid vapor consumers and also for the government. The research method used is the normative method. Normative research methods using statute approach. The result of the research shows that there is legal protection for liquid vapor consumer who is not licensed by BPOM, which is reviewed from the Law of the Republic of Indonesia Number 36 Year on concerning the health of Article 113 paragraph (1 and Article 114, Law of the Republic of Indonesia Number 8 Year 1999 on Consumer protection Article 8 paragraph (1 c and paragraph (1 i, Regulation of the Head of the Food and Drug Supervisory Agency of the Republic of Indonesia Number 4 Year 2017 on the Supervision of the Importation of Drugs into the Territory of Indonesia Article 4 paragraph (1. Keywords: Legal Protection, Consumer, Liquid-Vapor

Supporting the Ukrainian Supervisory authority when installing of an enhanced operational monitoring system for Saporoshje NPP. Final report

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.; Reitz, T.

2000-07-01

The system to improve the operational monitoring of the unit 5 of the Zaporozh'ye NPP which was put into operation as a pilot project in the middle of the nineties has been extended to all six units and connected by means of modern communication hardware with the Information- and Crisis Centre (ICC) of the Ukrainian Supervisory Authority in Kiev. The technical means necessary for the completion of the local network in the Zaporozh'ye NPP were jointly specified, procured in Germany, tested in the necessary extent, consigned to the Ukraine and handed over free to the partner at the place of action. After an appropriate enlargement of the software for information processing, transfer and evaluation 159 safety related operational and 25 radiological measuring values of each of the six VVER-1000 units can be permanently recorded, online illustrated and evaluated on a computer in forms of diagrams, charts and graphs at the NPP site as well as transferred to the ICC. Thus, the same information quantity can be used for monitoring purposes in the ICC in Kiev. (orig.) [de

The jurisdiction of administrative courts in disputes about the payment of costs incurred for investigating or supervisory tasks in compliance with section 21 AtG (Atomic Energy Act). Hess. VGH, decision of August 2, 1993 - 14 A 995/92

International Nuclear Information System (INIS)

Anon.

1994-01-01

Disputes about payment of costs incurred by investigating or supervisory tasks in compliance with section 21 AtG (Atomic Energy Act) are to be settled by a the first instance, the administrative courts. (Judgment of Higher Adm. Court of Hesse, as of August 2, 1993 - 14 A 995/92). (orig./HSCH) [de

A Double-Deck Elevator Group Supervisory Control System with Destination Floor Guidance System Using Genetic Network Programming

Science.gov (United States)

Yu, Lu; Zhou, Jin; Mabu, Shingo; Hirasawa, Kotaro; Hu, Jinglu; Markon, Sandor

The Elevator Group Supervisory Control Systems (EGSCS) are the control systems that systematically manage three or more elevators in order to efficiently transport the passengers in buildings. Double-deck elevators, where two elevators are connected with each other, serve passengers at two consecutive floors simultaneously. Double-deck Elevator systems (DDES) become more complex in their behavior than conventional single-deck elevator systems (SDES). Recently, Artificial Intelligence (AI) technology has been used in such complex systems. Genetic Network Programming (GNP), a graph-based evolutionary method, has been applied to EGSCS and its advantages are shown in some papers. GNP can obtain the strategy of a new hall call assignment to the optimal elevator when it performs crossover and mutation operations to judgment nodes and processing nodes. Meanwhile, Destination Floor Guidance System (DFGS) is installed in DDES, so that passengers can also input their destinations at elevator halls. In this paper, we have applied GNP to DDES and compared DFGS with normal systems. The waiting time and traveling time of DFGS are all improved because of getting more information from DFGS. The simulations showed the effectiveness of the double-deck elevators with DFGS in different building traffics.

Conventional and intelligent generalized supervisory control for combined cycle generating power stations.; Control supervisiorio generalizado convencional e inteligente para centrales de generacion de ciclo combinado

Energy Technology Data Exchange (ETDEWEB)

Martinez M, Miguel A; Sanchez P, Marino [Instituto de Investigaciones Electricas, Cuernavaca, Morelos (Mexico); Gonzalez Rubio S, Jose L [Cento Nacional de Investigacion y Desarrollo Tecnologico (Cenidet), Cuernavaca, Morelos (Mexico)

2005-07-01

Under the expectations of expansion of electric power generation in Mexico, this work exposes the development of a conventional and intelligent generalized supervisory control (CSG) for a combined cycle generation power plant. This one allows to obtain the optimal operation of the power plant through the automatic starting of the generating units and to obtain the maximum possible amount of electrical power in automatic and safe form. For the development of the CSG a control loop by temperature was implemented for the gas turbine system and a control loop by strangled pressure for the gas turbine and a control loop by strangled pressure for the steam turbine. The design of these supervisory systems was made with base in the critical limits on the involved variables of the process: blading average temperature, for the gas turbine (GT) and strangled pressure for the steam turbine (ST) [Spanish] Bajo estas expectativas de expansion de generacion de energia en Mexico, este trabajo expone el desarrollo de un control supervisorio generalizado (CSG) para una central generacion de ciclo combinado. Este permite lograr la operacion optima de la planta a traves del arranque automatico de las unidades generadoras y obtener la maxima cantidad posible de potencia electrica en forma automatica y segura. Para el desarrollo del CSG se implanto un lazo de control por temperatura para el sistema de turbina de gas y un lazo de control por presion estrangulada para la turbina de gas y un lazo de control por presion estrangulada para la turbina de vapor. El diseno de estos sistemas supervisorio se realizo con base en los limites criticos de las variables del proceso involucradas: temperatura promedio de empaletado para la turbina de gas (TG) y presion estrangulada para la turbina de vapor (TV)

Criteria of Sharī‘ah supervisory committee: A comparative study between guidelines of Bangladesh Bank and Bank Negara Malaysia

Directory of Open Access Journals (Sweden)

Muhammad Amanullah

2015-12-01

Full Text Available Islamic banking and finance differs from conventional banking and finance in that it follows the rules of Sharī‘ah. In order to ensure that Islamic banking and finance follows the Sharī‘ah rulings, it is essential for it to have a Sharī‘ah supervisory board. An important duty of this board is to determine that the products, services, policies, guidelines and all other activities performed by the Islamic bank, are in compliance with the Sharī‘ah rulings. To perform their duty properly, the members of this board should possess certain criteria. Bangladesh Bank has spelled out some guidelines for these criteria briefly. Likewise, Bank Negara Malaysia has provided some guidelines. The main objectives of this research paper are to highlight the guidelines of these two banks on these criteria, compare them and evaluate them in light of Sharī‘ah guidelines on these criteria spelled out by contemporary Muslim jurists.

Supervisor localization a top-down approach to distributed control of discrete-event systems

CERN Document Server

Cai, Kai

2016-01-01

This monograph presents a systematic top-down approach to distributed control synthesis of discrete-event systems (DES). The approach is called supervisor localization; its essence is the allocation of external supervisory control action to individual component agents as their internal control strategies. The procedure is: first synthesize a monolithic supervisor, to achieve globally optimal and nonblocking controlled behavior, then decompose the monolithic supervisor into local controllers, one for each agent. The collective behavior of the resulting local controllers is identical to that achieved by the monolithic supervisor. The basic localization theory is first presented in the Ramadge–Wonham language-based supervisory control framework, then demonstrated with distributed control examples of multi-robot formations, manufacturing systems, and distributed algorithms. An architectural approach is adopted to apply localization to large-scale DES; this yields a heterarchical localization procedure, which is...

Hessen: ordinance concerning competences in the field of nuclear protection and radiation protection

International Nuclear Information System (INIS)

Anon.

1977-01-01

Competences for: 1) Licensing of nuclear facilities; 2) use of nuclear fuels; 3) plan approval procedure; 4) supervisory authorities; 5) Radiation Protection Ordinance; 6) X-Ray Ordinance; 7) proceedings and disciplinary action against breaches of the rules. (HP) [de

Supervisão: estilos, satisfação e sintomas depressivos em estagiários de psicologia Supervision: supervisory style, supervisee satisfaction and depressive symptoms in psychology students

Directory of Open Access Journals (Sweden)

Ana Catarina Marques Ribeiro de Figueiredo

2007-12-01

Full Text Available A figura do supervisor assume-se como um dos principais factores protectores da experiência de estágio, emergindo como uma importante fonte de suporte emocional e/ou como um "amortecedor" do impacto gerado pela transição universidade-mundo do trabalho. Visando estudar a relação entre os estilos de supervisão, os níveis de satisfação do estagiário (em relação aos supervisores da universidade e da instituição de estágio e a sua eventual relação com sintomatologia depressiva, foi realizado um estudo com 83 estagiários de Psicologia da Universidade do Minho, avaliados no final do seu estágio, através do Inventário de Estilos Supervisivos, do Questionário da Qualidade da Supervisão e do Inventário da Depressão de Beck. Os resultados revelam uma concordância na forma como estes avaliam ambos os supervisores em termos de estilo supervisivo e satisfação com a supervisão, surgindo uma maior satisfação associada a um estilo atractivo e orientado para a tarefa. No caso do supervisor da universidade, a periodicidade regular do seu acompanhamento emerge como uma variável importante, associando-se a maiores níveis de satisfação. Não foram encontradas correlações entre qualquer uma dessas variáveis e sintomatologia depressiva.In this paper the supervisor is assumed as having a determinant role on the quality of the trainee's experience, acting as an important source of emotional support and as a "buffer" of the impact caused by the university-to-work transition. In an attempt to explore possible relationships between the supervisory styles, the supervisee's satisfaction (regarding the university and the field supervisor and depressive symptomatology the authors carried out a study, at the University of Minho, involving 83 psychology trainees evaluated at the end of their practicum. The study was based on the Supervisory Styles Inventory, the Supervisee Satisfaction Questionnaire and the Beck's Depression Inventory

American National Standard administrative practices for nuclear criticality safety, ANSI/ANS-8.19

International Nuclear Information System (INIS)

Smith, D.R.; Carson, R.W.

1991-01-01

American National Standard Administrative Practices for Nuclear Criticality Safety, ANSI/ANS-8.19, provides guidance for the administration of an effective program to control the risk of nuclear criticality in operations with fissile material outside reactors. The several sections of the standard address the responsibilities of management, supervisory personnel, and the criticality safety staff, as well as requirements and suggestions for the content of operating procedures, process evaluations, material control procedures, and emergency procedures

Support of the Ukrainean Supervisory Authority during the extension of the improved operational NCP monitoring. Final report part III

International Nuclear Information System (INIS)

Beyer, M.; Carl, H.

2005-05-01

Technical systems to improve the operational monitoring for the three units of the South Ukraine NPP and for the 1 st unit of the Chmelnitzky NPP were put up by analogy with the systems for the Zaporoshye NPP and the Rovno NPP. For that up to 51 safety-relevant technological and 16 radiological parameters from every unit are available to the supervisory authority on-site and in the crisis centre in Kiev for collection and assessment. These parameters are transferred on-line by modern technical equipment once a minute. The developed evaluation software enables the visualisation of the monitoring results in form of diagrams, charts and graphs. By means of an archive modus the trends of all parameters can be analysed. With the integration of the technical equipment delivered for the sheltered room of the Zaporoshye NPP into the on-site existing remote monitoring system is it now possible to record and to evaluate essential safety-relevant parameters of the whole NPP also during severe accidents by means of modern technical equipment. (orig.)

Einleitung

Science.gov (United States)

Ha, Suk-Woo

Der Einsatz von Implantaten zielt auf die Unterstützung oder den Ersatz von Zelloder Gewebefunktionen im menschlichen Körper. Die Werkstoffauswahl für diese Implantate hängt dabei von der Art und der Funktion des zu ersetzenden Gewebes ab. Die Anforderungen an den Implantatwerkstoff bezüglich Eigenschaften und Struktur können je nach Implantationsort und Funktionalität ganz unterschiedlich sein. Implantate, die im Knochengewebe Funktionen der Lasteinleitung und -überleitung ausüben, sind hohen mechanischen Anforderungen (optimale Bauteilsteifigkeit, Dauerfestigkeit) unterworfen, während bei Blutgefässimplantaten die Werkstoffoberfläche, primär in ihrer chemischen Zusammensetzung derart gestaltet sein muss, dass eine minimale Thrombogenität resultiert. Für den Erfolg des Implantatwerkstoffes oder -bauteils sind folgende drei Faktoren relevant: (a) Biokompatibilität, (b) Gesundheitszustand des Patienten und (c) Verlauf der Operation und der nachfolgenden Therapie. Bei Vorliegen einer Erkrankung, wie z. B. die allergische Sensibilisierung gegenüber Metallionen (Nickelallergie) oder Osteoporose im Fall der Verankerung von Hüftprothesen, ist der Implantatwerkstoff höheren Anforderungen bezüglich der Biokompatibilität unterworfen als bei organisch gesunden Patienten.

A Short-Term Outage Model of Wind Turbines with Doubly Fed Induction Generators Based on Supervisory Control and Data Acquisition Data

Directory of Open Access Journals (Sweden)

Peng Sun

2016-10-01

Full Text Available This paper presents a short-term wind turbine (WT outage model based on the data collected from a wind farm supervisory control and data acquisition (SCADA system. Neural networks (NNs are used to establish prediction models of the WT condition parameters that are dependent on environmental conditions such as ambient temperature and wind speed. The prediction error distributions are discussed and used to calculate probabilities of the operation of protection relays (POPRs that were caused by the threshold exceedance of the environmentally sensitive parameters. The POPRs for other condition parameters are based on the setting time of the operation of protection relays. The union probability method is used to integrate the probabilities of operation of each protection relay to predict the WT short term outage probability. The proposed method has been used for real 1.5 MW WTs with doubly fed induction generators (DFIGs. The results show that the proposed method is more effective in WT outage probability prediction than traditional methods.

The remote supervisory and controlling experiment system of traditional Chinese medicine production based on Fieldbus

Science.gov (United States)

Zhan, Jinliang; Lu, Pei

2006-11-01

Since the quality of traditional Chinese medicine products are affected by raw material, machining and many other factors, it is difficult for traditional Chinese medicine production process especially the extracting process to ensure the steady and homogeneous quality. At the same time, there exist some quality control blind spots due to lacking on-line quality detection means. But if infrared spectrum analysis technology was used in traditional Chinese medicine production process on the basis of off-line analysis to real-time detect the quality of semi-manufactured goods and to be assisted by advanced automatic control technique, the steady and homogeneous quality can be obtained. It can be seen that the on-line detection of extracting process plays an important role in the development of Chinese patent medicines industry. In this paper, the design and implement of a traditional Chinese medicine extracting process monitoring experiment system which is based on PROFIBUS-DP field bus, OPC, and Internet technology is introduced. The system integrates intelligence node which gathering data, superior sub-system which achieving figure configuration and remote supervisory, during the process of traditional Chinese medicine production, monitors the temperature parameter, pressure parameter, quality parameter etc. And it can be controlled by the remote nodes in the VPN (Visual Private Network). Experiment and application do have proved that the system can reach the anticipation effect fully, and with the merits of operational stability, real-time, reliable, convenient and simple manipulation and so on.

77 FR 52096 - Self-Regulatory Organizations; EDGX Exchange, Inc.; Order Approving a Proposed Rule Change, as...

Science.gov (United States)

2012-08-28

...'s rules, the financial and regulatory risk management controls and supervisory procedures required...-Regulatory Organizations; EDGX Exchange, Inc.; Order Approving a Proposed Rule Change, as Modified by... that broker-dealers appropriately control the risks associated with market access, so as not to...

RTE - 2013 Activity Report, 2013 Activity and Sustainable Development Report, financial results for 2013, Report of the Chairman of the Supervisory Board

International Nuclear Information System (INIS)

2014-01-01

RTE is the operator of the high and extra high-voltage transmission system in France. RTE operates, develops and maintains it. This role places RTE at the heart of smart power, supplying its customers: generators, distribution system operators, industrial customers and traders. RTE deploys its expertise to achieve smart power, with three objectives: - To optimise the power system so that everything operates at the lowest cost, every second, whatever the weather brings, whatever the level of supply and demand. - To guarantee a secure power supply, by offering tools and mechanisms that can be used to adjust generation and power consumption. - To adapt the grid to energy transition through constant innovation. RTE counts 8,400 employees. This document gathers both French and English versions of the 2013 Activity and Sustainable Development Report and the English version of the 2013 financial results and of the Report of the Chairman of the Supervisory Board

47 CFR 73.2080 - Equal employment opportunities (EEO).

Science.gov (United States)

2010-10-01

... establish a procedure to review and control managerial and supervisory performance; (2) Inform its employees..., national origin, or sex from its personnel policies and practices and working conditions; and (5) Conduct a... business and professional community whose membership includes substantial participation of women and...

78 FR 12397 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Order Granting Approval to Proposed...

Science.gov (United States)

2013-02-22

... a nominal amount, important customer protection rules such as exchange priority rules and the... another broker-dealer customer, the RMO's supervisory procedures must be reasonably designed to assure that the orders it receives from such broker-dealer customer that it designates as Retail Orders meet...

75 FR 4007 - Risk Management Controls for Brokers or Dealers With Market Access

Science.gov (United States)

2010-01-26

... 3235-AK53 Risk Management Controls for Brokers or Dealers With Market Access AGENCY: Securities and... or other persons, to implement risk management controls and supervisory procedures reasonably... access may not utilize any pre-trade risk management controls (i.e., ``unfiltered'' or ``naked'' access...

75 FR 69791 - Risk Management Controls for Brokers or Dealers With Market Access

Science.gov (United States)

2010-11-15

... relationship with the ultimate customer, can more effectively implement them. In addition, a broker or dealer... specific risk management controls and supervisory procedures to a customer that is a registered broker... such customer, based on its position in the transaction and relationship with the ultimate customer...

77 FR 52097 - Self-Regulatory Organizations; EDGA Exchange, Inc.; Order Approving a Proposed Rule Change, as...

Science.gov (United States)

2012-08-28

... financial and regulatory risk management controls and supervisory procedures required by Rule 15c3-5 under...-Regulatory Organizations; EDGA Exchange, Inc.; Order Approving a Proposed Rule Change, as Modified by... that broker-dealers appropriately control the risks associated with market access, so as not to...

12 CFR 715.3 - General responsibilities of the Supervisory Committee.

Science.gov (United States)

2010-01-01

..., verification of members' accounts and its additional responsibilities; (2) The credit union's accounting... administered; and (4) Policies and control procedures are sufficient to safeguard against error, conflict of...

Competence of the Higher Administrative Court over an administrative lawsuit concerning orders issued by the supervisory authority instituted under atomic energy law. Hess. VGH, decision of December 22, 1993 - 14 Q 2724/93

International Nuclear Information System (INIS)

Doering, H.

1994-01-01

The competence of the state over the storage of nuclear fuel, exercised by the Federal Radiation Protection Office, is not limited to the storage alone but extends to the acceptance and delivery of the material including all transport operations involved. Interactions between the operation of a fuel element plant and external processes can lead to the issue of orders under Article 19 Section 3 of the Atomic Energy Law, provided such interactions fall within the jurisdiction in rem of the supervisory authority instituted under atomic energy law. (orig./HSCH) [de

Evaluation of an in-vehicle monitoring system (IVMS) to reduce risky driving behaviors in commercial drivers: Comparison of in-cab warning lights and supervisory coaching with videos of driving behavior.

Science.gov (United States)

Bell, Jennifer L; Taylor, Matthew A; Chen, Guang-Xiang; Kirk, Rachel D; Leatherman, Erin R

2017-02-01

Roadway incidents are the leading cause of work-related death in the United States. The objective of this research was to evaluate whether two types of feedback from a commercially available in-vehicle monitoring system (IVMS) would reduce the incidence of risky driving behaviors in drivers from two companies. IVMS were installed in 315 vehicles representing the industries of local truck transportation and oil and gas support operations, and data were collected over an approximate two-year period in intervention and control groups. In one period, intervention group drivers were given feedback from in-cab warning lights from an IVMS that indicated occurrence of harsh vehicle maneuvers. In another period, intervention group drivers viewed video recordings of their risky driving behaviors with supervisors, and were coached by supervisors on safe driving practices. Risky driving behaviors declined significantly more during the period with coaching plus instant feedback with lights in comparison to the period with lights-only feedback (ORadj=0.61 95% CI 0.43-0.86; Holm-adjusted p=0.035) and the control group (ORadj=0.52 95% CI 0.33-0.82; Holm-adjusted p=0.032). Lights-only feedback was not found to be significantly different than the control group's decline from baseline (ORadj=0.86 95% CI 0.51-1.43; Holm-adjusted p>0.05). The largest decline in the rate of risky driving behaviors occurred when feedback included both supervisory coaching and lights. Supervisory coaching is an effective form of feedback to improve driving habits in the workplace. The potential advantages and limitations of this IVMS-based intervention program are discussed. Published by Elsevier Ltd.

76 FR 51457 - Order Temporarily Exempting the Floor Broker Operations of Broker-Dealers With Market Access That...

Science.gov (United States)

2011-08-18

... applicable in connection with market access.\\9\\ The required financial risk management controls and... Act of 1934 August 15, 2011. I. Introduction Pursuant to Rule 15c3-5(f) under the Securities Exchange... maintain a system of risk management controls and supervisory procedures that, among other things, is...

Prevention of damage under nuclear law, and the concept of 'expertise'

International Nuclear Information System (INIS)

Rengeling, H.W.

1987-01-01

According to sec. 20 sentence 1 of the Atomic Energy Act experts can be consulted in the licensing and supervisory procedure by the competent authorities. The article deals with fundamental aspects of statements by experts and advisers and their relation to the executive and the jurisdiction. (WG) [de

Reducing the occurrence of plant events through improved human performance

International Nuclear Information System (INIS)

Ross, T.; Burkhart, A.D.

1993-01-01

During a routine control room surveillance, the reactor operator is distracted by an alarming secondary annunciator and a telephone call. When the reactor operator resumes the surveillance, he inadvertently performs the procedural steps out of order. This causes a reportable nuclear event. How can procedure-related human performance problems such as this be prevented? The question is vitally important for the nuclear industry. The U.S. Nuclear Regulatory Commission's Office for Analysis and Evaluation of Operational Data observed, open-quotes With the perceived reduction in the number of events caused by equipment failures, INPO and other industry groups and human performance experts agree that a key to continued improvement in plant performance and safety is improved human performance.close quotes In fact, open-quotes more than 50% of the reportable events occurring at nuclear power plants involve human error.close quotes Prevention (or correction) of a human performance problem is normally based on properly balancing the following three factors: (1) supervisory involvement; (2) personnel training; and (3) procedures. The nuclear industry is implementing a formula known as ACME, which better balances supervisory involvement, personnel training, and procedures. Webster's New World Dictionary defines acme as the highest point, the peak. ACME human performance is the goal: ACME Adherence to and use of procedures; Self-Checking; Management Involvement; and Event Investigations

78 FR 17255 - Self-Regulatory Organizations; NASDAQ OMX BX, Inc.; Notice of Filing of Proposed Rule Change to...

Science.gov (United States)

2013-03-20

.... First, SEC Rule 15c3-5 requires that, ``financial risk management controls and supervisory procedures... Subparagraph (d)(iv) Regarding Obvious Error or Catastrophic Error Review March 15, 2013. Pursuant to Section... provide for how BX proposes to treat options errors in response to the Regulation NMS Plan to Address...

78 FR 17251 - Self-Regulatory Organizations; The NASDAQ Stock Market LLC; Notice of Filing of Proposed Rule...

Science.gov (United States)

2013-03-20

.... First, SEC Rule 15c3-5 requires that, ``financial risk management controls and supervisory procedures... Chapter V, Section 3 Subparagraph (d)(iv) Regarding Obvious Error or Catastrophic Error Review March 15... subparagraph (d)(iv) to provide for how NASDAQ proposes to treat options errors in response to the Regulation...

76 FR 25727 - Self-Regulatory Organizations; Chicago Stock Exchange, Inc.; Notice of Filing of Proposed Rule...

Science.gov (United States)

2011-05-05

... disciplinary proceeding, for a rule violation that the Exchange has found to be minor in nature, but which the... it from instituting other disciplinary proceedings. Article 12, Rule 8(f). Proposed New Rules for the... supervisory procedures (Article 6, Rule 5(b)); failure to report short positions (Article 7, Rule 9...

75 FR 1090 - Sunshine Act Meeting Notice

Science.gov (United States)

2010-01-08

... Exchange Commission will hold an Open Meeting on January 13, 2010 at 10 a.m., in the Auditorium, Room L-002... publish a concept release on equity market structure. The concept release would invite public comment on a... consider whether to propose a new rule regarding risk management controls and supervisory procedures to...

Algorithms and procedures in the model based control of accelerators

International Nuclear Information System (INIS)

Bozoki, E.

1987-10-01

The overall design of a Model Based Control system was presented. The system consists of PLUG-IN MODULES, governed by a SUPERVISORY PROGRAM and communicating via SHARED DATA FILES. Models can be ladded or replaced without affecting the oveall system. There can be more then one module (algorithm) to perform the same task. The user can choose the most appropriate algorithm or can compare the results using different algorithms. Calculations, algorithms, file read and write, etc. which are used in more than one module, will be in a subroutine library. This feature will simplify the maintenance of the system. A partial list of modules is presented, specifying the task they perform. 19 refs., 1 fig

12 CFR 702.1 - Authority, purpose, scope and other supervisory authority.

Science.gov (United States)

2010-01-01

... to the National Credit Union Share Insurance Fund. This part carries out the purpose of prompt...-insured credit unions. This part does not apply to corporate credit unions. Procedures for issuing...

26 CFR 1.166-2 - Evidence of worthlessness.

Science.gov (United States)

2010-04-01

... accounting.” The words “ELECTION UNDER § 1.166-2(d)(3)” must be typed or legibly printed at the top of the... connection with its most recent examination involving the bank's loan review process, the bank's supervisory... procedure prescribed hereunder) that the bank maintains and applies loan loss classification standards that...

Selection of compressors and drives for natural gas storage and transport - technical and economic aspects; Auswahl von Verdichtern und Antriebsmaschinen fuer die Erdgasspeicherung und den Erdgastransport - technische und wirtschaftliche Aspekte

Energy Technology Data Exchange (ETDEWEB)

Heyer, F.; Wieke, S. [Heyer und Wieke Engineering, Muenchen (Germany)

1998-12-31

Selection of the proper compressor/drive combination is indispensable for optimizing natural gas storage. The contribution presents a comparison of the available systems. (orig.) [Deutsch] Fuer die Verdichtung von Erdgas fuer die Erdgasspeicherung und den Erdgastransport ist die Auswahl der fuer den jeweiligen Anwendungsfall geeigneten Verdichter-Antriebskombination eine wesentliche Voraussetzung fuer einen technisch und wirtschaftlich optimalen Betrieb. Unter Beruecksichtigung des Marktes werden die Varianten (Verdichter-Antriebskombinationen) definiert und in einem technischen Vergleich Vor- und Nachteile der einzelnen Alternativen gegenuebergestellt und bewertet. Die Einhaltung der Betriebsanforderungen und der Anforderungen der TA-Luft und TA-Laerm, der Wirkungsgrad, die Zuverlaessigkeit und Verfuegbarkeit muessen einer besonders intensiven Pruefung und Beurteilung unterzogen werden. Das Ergebnis der vergleichenden Bewertung der Varianten kann eine neue Definition der Varianten oder der Anforderungen notwendig machen. (orig.)

IMPLEMENTASI TUGAS HAKIM PENGAWAS DAN PENGAMAT DALAM PENGAWASAN DAN PENGAMATAN TERHADAP NARAPIDANA (Kajian di Lembaga Pemasyarakatan Klas II A Purwokerto

Directory of Open Access Journals (Sweden)

Dessy Perdani Yuris PS

2010-05-01

Full Text Available The implementation of court judgments needs to be observed and perceived, thus the birth of Supervisor and Observer Judge Institution by Law No. 8 of 1981. The position of a Judge is not simply responsible for imposition of punishment, but also have to responsible for completion of punishment term by inmates in Correctional Institute by appropriate pattern and program of counseling. Besides in article 277 KUHAP till article 288 KUHAP it is charged another task as supervisor and observer of the court decision. The research results show that the implementation of the Supervisory Judge task and Observers in the execution of court decisions in Purwokerto Penitentiary is based on the Criminal Procedure Code Article 277 through Article 283 Criminal Procedure Code, the implementing regulations of the Supreme Court Circular No. RI. No. 7 of 1985. Supervisory Judge in the performance of duties and Observers in Purwokerto Penitentiary still met the constraints that are internal or external, internal resistance from law enforcement and the factors of factor means or facilities. Then the external barriers are the ruling factor.

Administrative Procedure Act and mass procedures (illustrated by the nuclear licensing procedure)

International Nuclear Information System (INIS)

Naumann, R.

1977-01-01

The report deals with the administrative procedure law of 25.5.76 of the Fed. Government, esp. with its meaning for the administrative procedures for the permission for nuclear power plants, as fas ar so-called mass procedures are concerned. (UN) [de

Emergency procedures

International Nuclear Information System (INIS)

Abd Nasir Ibrahim; Azali Muhammad; Ab Razak Hamzah; Abd Aziz Mohamed; Mohammad Pauzi Ismail

2004-01-01

The following subjects are discussed - Emergency Procedures: emergency equipment, emergency procedures; emergency procedure involving X-Ray equipment; emergency procedure involving radioactive sources

Summary Describing Integration of ERM Methodology into Supervisory Control Framework with Software Package Documentation; Advanced Reactor Technology Milestone: M4AT-16PN2301052

Energy Technology Data Exchange (ETDEWEB)

Ramuhalli, Pradeep [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hirt, Evelyn H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Dib, Gerges [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Veeramany, Arun [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bonebrake, Christopher A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Roy, Surajit [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-09-20

This project involved the development of enhanced risk monitors (ERMs) for active components in Advanced Reactor (AdvRx) designs by integrating real-time information about equipment condition with risk monitors. Health monitoring techniques in combination with predictive estimates of component failure based on condition and risk monitors can serve to indicate the risk posed by continued operation in the presence of detected degradation. This combination of predictive health monitoring based on equipment condition assessment and risk monitors can also enable optimization of maintenance scheduling with respect to the economics of plant operation. This report summarizes PNNL’s multi-year project on the development and evaluation of an ERM concept for active components while highlighting FY2016 accomplishments. Specifically, this report provides a status summary of the integration and demonstration of the prototypic ERM framework with the plant supervisory control algorithms being developed at Oak Ridge National Laboratory (ORNL), and describes additional case studies conducted to assess sensitivity of the technology to different quantities. Supporting documentation on the software package to be provided to ONRL is incorporated in this report.

Management of auxiliary aggregates - development and testing of methods for improved use of auxiliary aggregates of diesel and spark ignition engines in stationary and unstationary operation. Final report; Nebenaggregate-Management - Entwicklung und Erprobung von Verfahren zum verbesserten Einsatz der Nebenaggregate an Diesel- und Ottomotoren bei stationaerem und instationaerem Betrieb. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Schmidt, M; Lenzen, B; Groef, S; Isermann, R [Technische Univ. Darmstadt (Germany). Inst. fuer Regelungstechnik; Hohenberg, G [Technische Univ. Darmstadt (Germany). Fachgebiet Verbrennungskraftmaschinen

1998-07-01

Aggregate management is aimed at aggregate operation in consideration of demand, consumption and exhaust. Demands on reliability are high. Investigations were made using modelling, simulation, model reduction and identification, with the focus on model reduction. The resulting concepts for consumption reduction vary depending on the vehicle type and application. [German] Das Nebenaggregate-Management hat den bedarfs-, verbrauchs- und abgasorientierten Betrieb der Nebenaggregate im Kraftfahrzeug zum Ziel. Der sehr weit gespannte Einsatzbereich von Kraftfahrzeugen und die hohen Anforderungen an die Betriebszuverlaessigkeit stellen entsprechende Anforderungen an das Management. Zur Untersuchung eines verbesserten Betriebs von Nebenaggregaten wrden Verfahren der Regelungstechnik wie z.B. Modellbildung, Simulation, Modellreduktion und Identifikation eingesetzt, wobei der Modellreduktion in anbetracht des komplexen Gesamtsystems Kraftfahrzeug eine besondere Bedeutung zukommt. Ergebnisse der Untersuchungen sind Konzepte zur Verringerung des Verbrauchsanteils der Nebenaggregate, die je nach Fahrzeugtyp und Einsatzzweck variieren. (orig.)

Organization and duties of the site supervisory staff

International Nuclear Information System (INIS)

Macqueron, J.F.

1976-01-01

There are two distinct phases in building a nuclear power station: The first involves the choice of the site, and the second is building the power station on the site chosen. The decision as to the site requires a long series of studies undertaken by the electricity-producing authority in France (Electricite de France) in close liaison with the government and the public, its elected representatives and municipalities. The building of a power station takes place according to the following procedure: The general, installation and operational studies and the accident-simulation studies are carried out by the planning departments of the Regional Equipment Organizations; the works department of the Regional Equipment Organizations controls and follows up the manufacture of equipment in the factory; coordination of on-site erection, trials on site and start-up of the installations are carried out by the development section of the works department. (orig./HP) [de

Öffentlich-rechtliche Medien, zivilgesellschaftliche Interessengruppen und die Mitverantwortung des Publikums

NARCIS (Netherlands)

C. Herzog (Christian); D. Zetti (Daniela)

2016-01-01

markdownabstractDie Zukunft öffentlich-rechtlicher Medien und damit auch die Zukunft des Journalismus wird in zunehmendem Maße von gesteigerten Anforderungen an Transparenz und Partizipation in Bezug auf medienpolitische Entscheidungen geprägt. Aktuelle Schritte in diese Richtung sind „Audience

A Novel Supervisory Control Algorithm to Improve the Performance of a Real-Time PV Power-Hardware-In-Loop Simulator with Non-RTDS

Directory of Open Access Journals (Sweden)

Dae-Jin Kim

2017-10-01

Full Text Available A programmable direct current (DC power supply with Real-time Digital Simulator (RTDS-based photovoltaic (PV Power Hardware-In-the-Loop (PHIL simulators has been used to improve the control algorithm and reliability of a PV inverter. This paper proposes a supervisory control algorithm for a PV PHIL simulator with a non-RTDS device that is an alternative solution to a high-cost PHIL simulator. However, when such a simulator with the conventional algorithm which is used in an RTDS is connected to a PV inverter, the output is in the transient state and it makes it impossible to evaluate the performance of the PV inverter. Therefore, the proposed algorithm controls the voltage and current target values according to constant voltage (CV and constant current (CC modes to overcome the limitation of the Computing Unit and DC power supply, and it also uses a multi-rate system to account for the characteristics of each component of the simulator. A mathematical model of a PV system, programmable DC power supply, isolated DC measurement device, and Computing Unit are integrated to form a real-time processing simulator. Performance tests are carried out with a commercial PV inverter and prove the superiority of this proposed algorithm against the conventional algorithm.

Human-robot interaction modeling and simulation of supervisory control and situational awareness during field experimentation with military manned and unmanned ground vehicles

Science.gov (United States)

Johnson, Tony; Metcalfe, Jason; Brewster, Benjamin; Manteuffel, Christopher; Jaswa, Matthew; Tierney, Terrance

2010-04-01

The proliferation of intelligent systems in today's military demands increased focus on the optimization of human-robot interactions. Traditional studies in this domain involve large-scale field tests that require humans to operate semiautomated systems under varying conditions within military-relevant scenarios. However, provided that adequate constraints are employed, modeling and simulation can be a cost-effective alternative and supplement. The current presentation discusses a simulation effort that was executed in parallel with a field test with Soldiers operating military vehicles in an environment that represented key elements of the true operational context. In this study, "constructive" human operators were designed to represent average Soldiers executing supervisory control over an intelligent ground system. The constructive Soldiers were simulated performing the same tasks as those performed by real Soldiers during a directly analogous field test. Exercising the models in a high-fidelity virtual environment provided predictive results that represented actual performance in certain aspects, such as situational awareness, but diverged in others. These findings largely reflected the quality of modeling assumptions used to design behaviors and the quality of information available on which to articulate principles of operation. Ultimately, predictive analyses partially supported expectations, with deficiencies explicable via Soldier surveys, experimenter observations, and previously-identified knowledge gaps.

AGREED-UPON PROCEDURES, PROCEDURES FOR AUDITING EUROPEAN GRANTS

Directory of Open Access Journals (Sweden)

Daniel Petru VARTEIU

2016-12-01

The audit of EU-funded projects is an audit based on agreed-upon procedures, which are established by the Managing Authority or the Intermediate Body. Agreed-upon procedures can be defined as engagements made in accordance with ISRS 4400, applicable to agreed-upon procedures, where the auditor undertakes to carry out the agreed-upon procedures and issue a report on factual findings. The report provided by the auditor does not express any assurance. It allows users to form their own opinions about the conformity of the expenses with the project budget as well as the eligibility of the expenses.

Medienpädagogik in der offenen Kinder- und Jugendarbeit

Directory of Open Access Journals (Sweden)

Olivia Horak

2013-06-01

Full Text Available Überlegungen zu medienpädagogischem Handeln im Feld der offenen Kinder-, Jugend- und Erwachsenenarbeit werden im folgenden Beitrag exemplarisch am Jugend- und Stadtteilzentrum Margareten dargestellt. Die AutorInnen diskutieren dabei vor allem die damit verbundenen Anforderungen an PädagogInnen.

Development of basic technology for instrumentation and control - Development of digital automatic supervisory limitation system and its design= validation

Energy Technology Data Exchange (ETDEWEB)

Choi, Jung In; Chung, Sung Wook; Koh, Won Seok [Kyungwon University, Sungman (Korea, Republic of); Suh, Duk Young; Cheon, Sei Young [Kyunghee University, Seoul (Korea, Republic of); Lee, Sang Kyung; Kim, Sung Hun [Seoul National University, Seoul (Korea, Republic of)

1995-07-01

A major objective of the project is to develop a digital automatic supervisory limitation system and validate its design for the next generation= nuclear power plant. The limitation system assures that the plant does not exceed the operating limits by regulation the plant operations through on-line monitoring the operating margins of the critical parameters. A new conceptual model of power maneuverability has been proposed for the design of the limitation system and for its validation. Also, the limitation system monitors overall operation processes throughout a nuclear power plant by implementing hierarchical communication networks. Based on the conceptual design in software of the 1 st year results, the detailed design of the limitation system has been performed during the 2 nd year with constructing a prototype digital system. The system consists of the software module for plant simulation and the hardware module for implementation of limitation system and the associated interfaces in hardware. The limitation algorithm were implemented into the microprocessor and the interfaces were realized through the I/O modules. Also, these modules are incorporated into the communication networks. The products of the project could be directly applicable to the following nuclear unit adopting the limitation system, providing the bumpless transition to the commercial design phase. And the prototype evaluation scheme will be very useful for the succeeding studies related to the digital nuclear I and C fields, such as fault-tolerance design methods, software verification and validation and response time execution of digital systems. 69 refs., 3 tabs., 44 figs. (author)

Quantization Procedures

International Nuclear Information System (INIS)

Cabrera, J. A.; Martin, R.

1976-01-01

We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs

Efficiency of performing pulmonary procedures in a shared endoscopy unit: procedure time, turnaround time, delays, and procedure waiting time.

Science.gov (United States)

Verma, Akash; Lee, Mui Yok; Wang, Chunhong; Hussein, Nurmalah B M; Selvi, Kalai; Tee, Augustine

2014-04-01

The purpose of this study was to assess the efficiency of performing pulmonary procedures in the endoscopy unit in a large teaching hospital. A prospective study from May 20 to July 19, 2013, was designed. The main outcome measures were procedure delays and their reasons, duration of procedural steps starting from patient's arrival to endoscopy unit, turnaround time, total case durations, and procedure wait time. A total of 65 procedures were observed. The most common procedure was BAL (61%) followed by TBLB (31%). Overall procedures for 35 (53.8%) of 65 patients were delayed by ≥ 30 minutes, 21/35 (60%) because of "spillover" of the gastrointestinal and surgical cases into the time block of pulmonary procedure. Time elapsed between end of pulmonary procedure and start of the next procedure was ≥ 30 minutes in 8/51 (16%) of cases. In 18/51 (35%) patients there was no next case in the room after completion of the pulmonary procedure. The average idle time of the room after the end of pulmonary procedure and start of next case or end of shift at 5:00 PM if no next case was 58 ± 53 minutes. In 17/51 (33%) patients the room's idle time was >60 minutes. A total of 52.3% of patients had the wait time >2 days and 11% had it ≥ 6 days, reason in 15/21 (71%) being unavailability of the slot. Most pulmonary procedures were delayed due to spillover of the gastrointestinal and surgical cases into the block time allocated to pulmonary procedures. The most common reason for difficulty encountered in scheduling the pulmonary procedure was slot unavailability. This caused increased procedure waiting time. The strategies to reduce procedure delays and turnaround times, along with improved scheduling methods, may have a favorable impact on the volume of procedures performed in the unit thereby optimizing the existing resources.

Ageing management of mechanical components; Alterungsmanagement fuer mechanische Komponenten

Energy Technology Data Exchange (ETDEWEB)

Hienstorfer, W. [TUeV Energie- und Systemtechnik GmbH, Filderstadt (Germany); Herter, K.H.; Schuler, X. [Materialpruefungsanstalt, Univ. Stuttgart, Stuttgart (Germany)

2004-07-01

Lifetime management, ageing management and integrity testing are part of technical rules and specifications. The contribution focuses on ageing management, for which different technical measures are required depending on the safety relevance of the components and systems involved. The procedure for ensuring adherence to the specified quality is outlined, and the required technical and organisational measures are explained. (orig.) [German] In Leitlinien und Regelwerken sind fuer mechanische Komponenten Anforderungen zur Absicherung des Betriebs waehrend der gesamten Lebensdauer (Lebensdauermanagement), zur Absicherung von Alterungsphaenomenen (Alterungsmanagement) als auch zum Nachweis der Integritaet (Integritaetsnachweis, z.B. mit dem Ziel des Bruchausschlusses) enthalten. Ein wesentliches Element stellt dabei das Alterungsmanagement dar. Je nach sicherheitstechnischer Bedeutung der zu betrachtenden Komponenten und Systeme oder auch aus Gruenden der vorbeugenden Instandhaltung sind unterschiedliche technische Massnahmen erforderlich. Die Vorgehensweise zur Absicherung der im Betrieb geforderten Qualitaet wird aufgezeigt und die dabei erforderlichen technischen und organisatorischen Massnahmen werden erlaeutert. (orig.)

Anforderungen des Nicht-Elektrischen Explosionsschutzes im Produktentwicklungsprozess

OpenAIRE

Herbst, Sabrina; Engelmann, Frank; Grote, Karl-Heinrich

2016-01-01

Einleitung Der Faktor Zeit nimmt in unserer heutigen Gesellschaft einen bedeutsamen Platz in den unterschiedlichsten Bereichen unseres Lebens und Wirkens ein. Beispielsweise verbreiten sich Nachrichten weltweit innerhalb von Minuten, Reisezeiten verkürzen sich von Tagen auf mehrere Stunden (Kurpjuweit 2013) und die Hersteller von Unterhaltungselektronik verkürzen die Produktlebenszyklen um neue Produkte schneller am Markt zu platzieren (Scheimann 2011). Die Reduzierung des Produktlebens...

Intercomparison tests and internal control samples as substantial elements of the quality control system: practical insights; Ringversuche und interne Kontrollproben als Elemente der Qualitaetssicherung: Erfahrungen aus der Praxis

Energy Technology Data Exchange (ETDEWEB)

Beyer, D.; Hartmann, M. [Bundesamt fuer Strahlenschutz, Berlin (Germany). Inst. fuer Angewandten Strahlenschutz

2002-07-01

The contribution highlights the practical experience accumulated in implementing the statutory ordinance on the monitoring of incorporated ionizing radiation by official monitoring stations, effective in Germany since 1996, focusing on the quality assurance system to be maintained by those stations. The examples used to illustrate practical aspects are: participation in intercomparison tests, sampling for internal control purposes, and the monitoring by way of excretion analyses of individuals handling alpha and beta emitters (nuclides) at their place of work. (orig./CB) [German] Im Jahre 1996 trat in Deutschland die 'Richtlinie ueber Anforderungen an Inkorporationsmessstellen' (Anforderungsrichtlinie) in Kraft. Danach werden fuer die Durchfuehrung der Inkorporationsueberwachung nur noch Messstellen amtlich anekannt, die unter anderem den dort gegebenen Anforderungen an Qualitaetssicherungsmassnahmen genuegen. Im Einzelnen betrifft dies die Teilnahme an Ringversuchen sowie die vorgeschriebenen internen Eigenkontrollen. Am Beispiel der Inkorporationsueberwachung durch Ausscheidungsanalyse, die bevorzugt beim Umgang mit alpha- und betastrahlenden Nukliden durchgefuehrt wird, werden die bisherigen Erfahrungen bei Anwendung der Anforderungsrichtlinie vorgestellt. (orig.)

Disposal of radioactive waste

International Nuclear Information System (INIS)

Schmude, J.

1976-01-01

Speech on the 18th March 1976 in the Bundestag by the parliamentary Secretary of State, Dr. Juergen Schmude, to substantiate the Federal government's draft to a Fourth Act amending the Atomic Energy Act. The draft deals mainly with the final storage of radioactive wastes and interrelated questions concerning waste treatment and waste collection, and with several ordinance empowerments in order to improve licensing and supervisory procedures. (orig./LN) [de

Computerized procedures system

Science.gov (United States)

Lipner, Melvin H.; Mundy, Roger A.; Franusich, Michael D.

2010-10-12

An online data driven computerized procedures system that guides an operator through a complex process facility's operating procedures. The system monitors plant data, processes the data and then, based upon this processing, presents the status of the current procedure step and/or substep to the operator. The system supports multiple users and a single procedure definition supports several interface formats that can be tailored to the individual user. Layered security controls access privileges and revisions are version controlled. The procedures run on a server that is platform independent of the user workstations that the server interfaces with and the user interface supports diverse procedural views.

More than just a converter; Mehr als nur ein Umwandler

Energy Technology Data Exchange (ETDEWEB)

Wilming, Wilhelm

2013-08-06

Inverter can convert more than alternating current. With the presented new products at the INTERSOLAR in Munich the manufacturers are responding to the increased demands. [German] Wechselrichter koennen mehr als nur Wechselstrom umwandeln. Mit den auf der INTERSOLAR in Muenchen vorgestellten Produktneuheiten reagieren die Hersteller auf die gestiegenen Anforderungen.

The system of legal regulations and supervisory powers in the German Atomic Energy Law

International Nuclear Information System (INIS)

Weber, K.H.

1984-01-01

The first part of the book deals with the practical implementation of the legal provisions governing examination and subsequent licensing and judicial restraint, and the effects of actual practice on the energy industry, for the purpose of showing the chain of cause and effect of the frequently lamented delays in the further utilisation of nuclear energy, and of analysing the role of the administrative courts in the process, pointing to the explosiveness in terms of economics of this issue. The second part analyses the risk assessments from the legal and technical point of view in order to ascertain whether the findings of risk assessments are suitable to serve as scale models for decisions to be taken by the courts. The third part is a critical evaluation of the numerous attempts to incorporate the general doctrine of discretionary power into the system of atomic energy law in a way conformable with the existing system. This analysis resulting in the statement that the attempts have failed so far, the fourth part of the book discusses the necessity to look for other solutions, among other things by critically screening the dogma of discretionary power. The author comes to the conclusion that judicial restraint is to be cut back in the licensing procedure, however not to the extent that control over the authorities is abandoned altogether, but rather in such a way that the power of administrative courts does not develop into judgments executing the law. It is to be avoided that licensing procedures for nuclear power plants degenerate into 'administrative procedures preceded by administrative procedures'. This may not be confounded with giving up all possibilities of legal protection. (orig./HSCH) [de

Computer assisted procedure maintenance

International Nuclear Information System (INIS)

Bisio, R.; Hulsund, J. E.; Nilsen, S.

2004-04-01

The maintenance of operating procedures in a NPP is a tedious and complicated task. Through the whole life cycle of the procedures they will be dynamic, 'living' documents. Several aspects of the procedure must be considered in a revision process. Pertinent details and attributes of the procedure must be checked. An organizational structure must be created and responsibilities allotted for drafting, revising, reviewing and publishing procedures. Available powerful computer technology provides solutions within document management and computerisation of procedures. These solutions can also support the maintenance of procedures. Not all parts of the procedure life cycle are equally amenable to computerized support. This report looks at the procedure life cycle in todays NPPs and discusses the possibilities associated with introduction of computer technology to assist the maintenance of procedures. (Author)

Thermal insulation with glazings and windows. Implementation of requirements and outlook on future development; Waermeschutz mit Verglasungen und Fenstern. Umsetzung der Anforderungen und Ausblick auf Weiterentwicklung

Energy Technology Data Exchange (ETDEWEB)

Froelich, H. [Institut fuer Fenstertechnik e.V., Rosenheim (Germany)

1997-06-01

der Vergangenheit oft als waermetechnische Schwachstellen in der Aussenhuelle eines Gebaeudes angesehen. Steigende Anforderungen an den baulichen Waermeschutz wurden von allen Beteiligten als Herausforderung angenommen. Die Entwicklung neuer Verglasungen und verbesserter Rahmen machte es moeglich, auch nach Inkrafttreten der neuen Waermeschutzverordnung am 1. Januar 1995 grossflaechige Fenster und verglaste Fassadenelemente einzusetzen. Von wesentlicher Bedeutung ist in diesem Zusammenhang die jetzt moegliche Beruecksichtigung des Energiezugewinns von aussen ueber transparente Bauteile. Die einzelnen Komponenten von Fenstern, Fensterelementen und Leichtfassaden wie Rahmen, Verglasungen, Paneele und Zusatzbauteile, wie z.B. Rollaeden, muessen allerdings genau geplant werden. Neben den thermischen Eigenschaften sind auch stets die anderen Kriterien wie Brandschutz, Schallschutz, Sonnenschutz und Sicherheit zu beruecksichtigen. Die neuen Landesbauordnungen und die vom Deutschen Institut fuer Bautechnik gefuehrte Bauregelliste legen fest, welche Verwendbarkeits- und Uebereinstimmungsnachweise fuer die verschiedenen Bauprodukte wie Rahmen, Glas, Fenster, Rolladenkaesten, Heizkoerperabdeckungen usw. erforderlich sind. Dabei wird z.Zt. noch ueberwiegend auf nationale Regelwerke Bezug genommen. Zukuenftig werden jedoch mehr und mehr europaeische Normen fertiggestellt und auch eingefuehrt. Auch bei Fenstern und Verglasungen wird es hier einige entscheidende Veraenderungen geben. Waermebrueckeneffekte werden staerker beruecksichtigt. Fuer die Ermittlung von waermetechnischen Eigenschaften wird es verstaerkt die Moeglichkeit der Berechnung geben. Fenster und Verglasungen sind heute bei richtiger Planung und Ausfuehrung waermetechnisch hochentwickelte Bauprodukte, die auch in grossflaechigen Abmessungen energiesparendes Bauen ermoeglichen. (orig.)

AREVA - 2013 Reference document

International Nuclear Information System (INIS)

2014-01-01

This Reference Document contains information on the AREVA group's objectives, prospects and development strategies, as well as estimates of the markets, market shares and competitive position of the AREVA group. Content: 1 - Person responsible for the Reference Document; 2 - Statutory auditors; 3 - Selected financial information; 4 - Description of major risks confronting the company; 5 - Information about the issuer; 6 - Business overview; 7 - Organizational structure; 8 - Property, plant and equipment; 9 - Situation and activities of the company and its subsidiaries; 10 - Capital resources; 11 - Research and development programs, patents and licenses; 12 - Trend information; 13 - Profit forecasts or estimates; 14 - Management and supervisory bodies; 15 - Compensation and benefits; 16 - Functioning of the management and supervisory bodies; 17 - Human resources information; 18 - Principal shareholders; 19 - Transactions with related parties; 20 - Financial information concerning assets, financial positions and financial performance; 21 - Additional information; 22 - Major contracts; 23 - Third party information, statements by experts and declarations of interest; 24 - Documents on display; 25 - Information on holdings; Appendix 1: report of the supervisory board chairman on the preparation and organization of the board's activities and internal control procedures; Appendix 2: statutory auditors' reports; Appendix 3: environmental report; Appendix 4: non-financial reporting methodology and independent third-party report on social, environmental and societal data; Appendix 5: ordinary and extraordinary general shareholders' meeting; Appendix 6: values charter; Appendix 7: table of concordance of the management report; glossaries

Human factoring administrative procedures

International Nuclear Information System (INIS)

Grider, D.A.; Sturdivant, M.H.

1991-01-01

In nonnuclear business, administrative procedures bring to mind such mundane topics as filing correspondence and scheduling vacation time. In the nuclear industry, on the other hand, administrative procedures play a vital role in assuring the safe operation of a facility. For some time now, industry focus has been on improving technical procedures. Significant efforts are under way to produce technical procedure requires that a validated technical, regulatory, and administrative basis be developed and that the technical process be established for each procedure. Producing usable technical procedures requires that procedure presentation be engineered to the same human factors principles used in control room design. The vital safety role of administrative procedures requires that they be just as sound, just a rigorously formulated, and documented as technical procedures. Procedure programs at the Tennessee Valley Authority and at Boston Edison's Pilgrim Station demonstrate that human factors engineering techniques can be applied effectively to technical procedures. With a few modifications, those same techniques can be used to produce more effective administrative procedures. Efforts are under way at the US Department of Energy Nuclear Weapons Complex and at some utilities (Boston Edison, for instance) to apply human factors engineering to administrative procedures: The techniques being adapted include the following

Spline-procedures

International Nuclear Information System (INIS)

Schmidt, R.

1976-12-01

This report contains a short introduction to spline functions as well as a complete description of the spline procedures presently available in the HMI-library. These include polynomial splines (using either B-splines or one-sided basis representations) and natural splines, as well as their application to interpolation, quasiinterpolation, L 2 -, and Tchebycheff approximation. Special procedures are included for the case of cubic splines. Complete test examples with input and output are provided for each of the procedures. (orig.) [de

Electrical supervisory control and data acquisition system for Power Reactor Fuel Reprocessing Facility (PREFRE-II) at Tarapur

International Nuclear Information System (INIS)

Singh, V.K.; Kaushik, S.; Haneef, K.K.M.

2014-01-01

Power Reactor Fuel Reprocessing Facility (PREFRE II) is a radio-chemical plant located at Tarapur. The electric power supply to PREFRE-II plant has been provided from a 33 KV Sub-station located in PREFRE-II complex to meet the O and M requirement of plant. The major equipment of the substation includes HT switch board, dry type transformer, LT switch board, Diesel Generator (DG) set and Un-interrupted Power Supply (UPS) System. The power supply to the plant is provided at 415 V voltage level with the help of Power Distribution Boards (PDBs) and Motor Control Centres (MCCs) located at different floors of the plant. The parameters of the electrical equipment of substation and plant are recorded in each shift in the log-book, manually by the operator. To maintain the log-book, the operator needs to go closer to the individual equipment in radioactive area of the plant to read the parameters. The log-book method of monitoring is a cumbersome method and does not include fault event records, trends and diagnostic behavior of the equipment. Electrical Supervisory Control and Data Acquisition (E-SCADA) system has been increasingly used in Nuclear Power Plants (NPPs) for control and monitoring of electrical parameters of plant and switchyard equipment. E-SCADA system has been designed, developed and implemented for PREFRE-II plant for remote monitoring of parameters of electrical equipment. E-SCADA system provides monitoring of electrical equipment and renders complete guidance and information with the help of Graphical User Interface (GUI) to the operator to take necessary action during normal and abnormal conditions. E-SCADA with intelligent communication features helps in reducing cabling from field equipment which enhances the fire safety of plant. As a result engineering, operation and maintenance efforts for monitoring are reduced considerably in terms of requirement of skilled man power and accurate data logging of electrical parameters. This system also helps to

How do we know what makes for "best practice" in clinical supervision for psychological therapists? A content analysis of supervisory models and approaches.

Science.gov (United States)

Simpson-Southward, Chloe; Waller, Glenn; Hardy, Gillian E

2017-11-01

Clinical supervision for psychotherapies is widely used in clinical and research contexts. Supervision is often assumed to ensure therapy adherence and positive client outcomes, but there is little empirical research to support this contention. Regardless, there are numerous supervision models, but it is not known how consistent their recommendations are. This review aimed to identify which aspects of supervision are consistent across models, and which are not. A content analysis of 52 models revealed 71 supervisory elements. Models focus more on supervisee learning and/or development (88.46%), but less on emotional aspects of work (61.54%) or managerial or ethical responsibilities (57.69%). Most models focused on the supervisee (94.23%) and supervisor (80.77%), rather than the client (48.08%) or monitoring client outcomes (13.46%). Finally, none of the models were clearly or adequately empirically based. Although we might expect clinical supervision to contribute to positive client outcomes, the existing models have limited client focus and are inconsistent. Therefore, it is not currently recommended that one should assume that the use of such models will ensure consistent clinician practice or positive therapeutic outcomes. There is little evidence for the effectiveness of supervision. There is a lack of consistency in supervision models. Services need to assess whether supervision is effective for practitioners and patients. Copyright © 2017 John Wiley & Sons, Ltd.

Qualification of contractor/consultant instructors

International Nuclear Information System (INIS)

Hanson, H.D.

1985-01-01

Following a brief discussion of the role of consultant instructors in Public Service Electric and Gas Company's training organization, the qualification process is presented. Consultant instructors are provided with information regarding supervision of the trainees and the instructional process and procedures required. Each individual must have his or her instructional capability, supervisory skills and technical competence verified and documented prior to conducting training independently. Concluding comments describe the overall satisfactory experience with this program

4. German conference on food irradiation. Assessment - methods - detection

International Nuclear Information System (INIS)

Brockmann, A.; Erning, D.; Helle, N.; Schreiber, G.A.

1994-01-01

The fourth German Conference on Food Irradiation was held from 6th through 7th April 1994. Some seventy participants from the industry, scientific research, consumer organizations and supervising authorities discussed the pros and cons of the procedure and updated themselves on the latest governmental regulations, irradiation techniques, possibilities of detecting irradiated food and the results of official supervisory measures. The papers read at the meeting are summarized in this volume. (orig./vhe) [de

Nuclear units operating improvement by using operating experience

International Nuclear Information System (INIS)

Rotaru, I.; Bilegan, I.C.

1997-01-01

The paper presents how the information experience can be used to improve the operation of nuclear units. This areas include the following items: conservative decision making; supervisory oversight; teamwork; control room distraction; communications; expectations and standards; operator training and fundamental knowledge, procedure quality and adherence; plant status awareness. For each of these topics, the information illustrate which are the principles, the lessons learned from operating experience and the most appropriate exemplifying documents. (authors)

Designing Supervision under the preventive Anti-money laundering policy in the European Union

OpenAIRE

van den Broek, Melissa

2014-01-01

Directive 2005/60/EC on the prevention of the use of the financial system for the purpose of money laundering and terrorist financing is currently one of the main instruments which regulates efforts to combat money laundering (and terrorist financing) in the European Union. Respecting national procedural autonomy, this directive leaves a high degree of freedom for the Member States in designing their own supervisory architectures under the preventive anti-money laundering policy. This contrib...

Taking the moral hazard out of banking: the next fundamental step in financial reform

Directory of Open Access Journals (Sweden)

Rainer Masera

2011-01-01

Full Text Available The path between financial meltdown and moral hazard in banking is, at best, narrow and impervious. During the financial crisis, public support became the standard response to save the banks in difficulty, heightening and broadening the moral hazard issue: subordinated/senior debt holders and large depositors were bailed out and equity holders were partially sheltered. In the Eurozone, the implicit promise to bail-out governments in difficulty has encouraged SIFIs and other financial operators to speculate on the yield differential between sovereigns and the ECB money market interest rates. The policy framework proposed here is two-pronged: the EFSF should evolve to permit more flexible and wide-ranging interventions, and be able to manage sovereign debt restructuring; with respect to SIFIs, very early corporate, market and supervisory responses are suggested. Intervention of supervisory authorities with mandatory (special powers would occur before the threshold of non-viability and, on a gone-concern basis, in terms of a European resolution procedure.

Procedural Media Representation

OpenAIRE

Henrysson, Anders

2002-01-01

We present a concept for using procedural techniques to represent media. Procedural methods allow us to represent digital media (2D images, 3D environments etc.) with very little information and to render it photo realistically. Since not all kind of content can be created procedurally, traditional media representations (bitmaps, polygons etc.) must be used as well. We have adopted an object-based media representation where an object can be represented either with a procedure or with its trad...

Procedure generation and verification

International Nuclear Information System (INIS)

Sheely, W.F.

1986-01-01

The Department of Energy has used Artificial Intelligence of ''AI'' concepts to develop two powerful new computer-based techniques to enhance safety in nuclear applications. The Procedure Generation System, and the Procedure Verification System, can be adapted to other commercial applications, such as a manufacturing plant. The Procedure Generation System can create a procedure to deal with the off-normal condition. The operator can then take correct actions on the system in minimal time. The Verification System evaluates the logic of the Procedure Generator's conclusions. This evaluation uses logic techniques totally independent of the Procedure Generator. The rapid, accurate generation and verification of corrective procedures can greatly reduce the human error, possible in a complex (stressful/high stress) situation

Supervisory system for real time monitoring of transient thermal stresses in turbines rotors; Sistema supervisorio para el monitoreo en tiempo real de esfuerzos termicos transitorios en rotores de turbinas

Energy Technology Data Exchange (ETDEWEB)

Urquiza Beltran, Gustavo; Rios Miranda, Edmundo; Venegas Guzman, Ricardo; Alvarez Garcia, Gabriela [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1991-12-31

This article presents a supervisory system that, as its main functions, assists the operator on base of the thermal stresses, monitoring in real time the high pressure (HP) and intermediate pressure rotors (IP) of a steam turbine during the start, shut down and/or sudden load changes. The system is based on a thermal model uni-dimensional integrated to the SIMPER (Information System for the Predictive Maintenance of Rotating Equipment), tested in a 300 MW unit of Comision Federal de Electricidad (CFE). [Espanol] En este articulo se presenta un sistema supervisorio que, como funciones principales, asiste al operador con base en el monitoreo de esfuerzos termicos en tiempo real en los rotores de presion alta (PA) y presion intermedia (PI) de una turbina de vapor durante un arranque, paro y/o variaciones bruscas de carga. El sistema esta basado en un modelo termico unidimensional integrado al SIMPER (sistema informatico para el mantenimiento predictivo de equipo rotatorio), experimentado en una unidad de 300 MW de la Comision Federal de Electricidad (CFE).

Supervisory system for real time monitoring of transient thermal stresses in turbines rotors; Sistema supervisorio para el monitoreo en tiempo real de esfuerzos termicos transitorios en rotores de turbinas

Energy Technology Data Exchange (ETDEWEB)

Urquiza Beltran, Gustavo; Rios Miranda, Edmundo; Venegas Guzman, Ricardo; Alvarez Garcia, Gabriela [Instituto de Investigaciones Electricas, Cuernavaca (Mexico)

1992-12-31

This article presents a supervisory system that, as its main functions, assists the operator on base of the thermal stresses, monitoring in real time the high pressure (HP) and intermediate pressure rotors (IP) of a steam turbine during the start, shut down and/or sudden load changes. The system is based on a thermal model uni-dimensional integrated to the SIMPER (Information System for the Predictive Maintenance of Rotating Equipment), tested in a 300 MW unit of Comision Federal de Electricidad (CFE). [Espanol] En este articulo se presenta un sistema supervisorio que, como funciones principales, asiste al operador con base en el monitoreo de esfuerzos termicos en tiempo real en los rotores de presion alta (PA) y presion intermedia (PI) de una turbina de vapor durante un arranque, paro y/o variaciones bruscas de carga. El sistema esta basado en un modelo termico unidimensional integrado al SIMPER (sistema informatico para el mantenimiento predictivo de equipo rotatorio), experimentado en una unidad de 300 MW de la Comision Federal de Electricidad (CFE).

Integrated architecture of monitoring, supervisory and automatic control for optimization of the operations in the natural gas turbo compressor station at Guamare - state of Rio Grande do Norte - Brazil

International Nuclear Information System (INIS)

Nascimento Filho, Epitacio

2000-01-01

This paper presents the conception and the benefits of the integrated supervisory control architecture for performance, aero thermodynamic and mechanical monitoring of the Ubarana Phase V Turbo compressor Station in Guamare-Rn. The compression station has four gas turbines, each one developing 6.640 kW ( 9.600 rpm - ISO power), driving four centrifugal compressors, each one with unitary capacity of 850.000 m 3 /d, arranged in parallel. The integrated architecture allows the continuous tele monitoring of a large range of mechanical and process parameters. Other resources are real time identification of deterioration signs or performance decaying of each machine in service, serving as a precious tool for the operation and maintenance decisions like wash application intervals and partial or general equipment revision. Just for the sake of operational cost impacts: a small increase of 1% in overall thermal efficiency represents a reduction of US$ 60,000 in annual operational cost, since the annual fuel consume nears US$ 6 million (considering 20 MW with 8,000 h). (author)

The Optimum Level of Argumentativeness for Employed Women.

Science.gov (United States)

Schullery, Nancy M.

1998-01-01

Examines the relationship between argumentativeness and women's supervisory level in organizations. Finds no simple relationship between supervisory level and argumentativeness for women, but indicates that moderation in argumentativeness increases with supervisory level. Notes implications for pedagogy: would-be female executives should be…

Are minimally invasive procedures harder to acquire than conventional surgical procedures?

Science.gov (United States)

Hiemstra, Ellen; Kolkman, Wendela; le Cessie, Saskia; Jansen, Frank Willem

2011-01-01

It is frequently suggested that minimally invasive surgery (MIS) is harder to acquire than conventional surgery. To test this hypothesis, residents' learning curves of both surgical skills are compared. Residents had to be assessed using a general global rating scale of the OSATS (Objective Structured Assessment of Technical Skills) for every procedure they performed as primary surgeon during a 3-month clinical rotation in gynecological surgery. Nine postgraduate-year-4 residents collected a total of 319 OSATS during the 2 years and 3 months investigation period. These assessments concerned 129 MIS (laparoscopic and hysteroscopic) and 190 conventional (open abdominal and vaginal) procedures. Learning curves (in this study defined as OSATS score plotted against procedure-specific caseload) for MIS and conventional surgery were compared using a linear mixed model. The MIS curve revealed to be steeper than the conventional curve (1.77 vs. 0.75 OSATS points per assessed procedure; 95% CI 1.19-2.35 vs. 0.15-1.35, p < 0.01). Basic MIS procedures do not seem harder to acquire during residency than conventional surgical procedures. This may have resulted from the incorporation of structured MIS training programs in residency. Hopefully, this will lead to a more successful implementation of the advanced MIS procedures. Copyright © 2010 S. Karger AG, Basel.

Play vs. Procedures

DEFF Research Database (Denmark)

Hammar, Emil

Through the theories of play by Gadamer (2004) and Henricks (2006), I will show how the relationship between play and game can be understood as dialectic and disruptive, thus challenging understandings of how the procedures of games determine player activity and vice versa. As such, I posit some...... analytical consequences for understandings of digital games as procedurally fixed (Boghost, 2006; Flannagan, 2009; Bathwaite & Sharp, 2010). That is, if digital games are argued to be procedurally fixed and if play is an appropriative and dialectic activity, then it could be argued that the latter affects...... and alters the former, and vice versa. Consequently, if the appointed procedures of a game are no longer fixed and rigid in their conveyance of meaning, qua the appropriative and dissolving nature of play, then understandings of games as conveying a fixed meaning through their procedures are inadequate...

Investigation of possible primary energy conservation using different coupling scenarios of mechanical ventilation systems with heat recovery on processes of space - and service water heating.; Untersuchung der erzielbaren Primaerenergieeinsparung bei unterschiedlichen Kopplungsvarianten mechanischer Lueftungsanlagen mit Waermerueckgewinnung an Verfahren zur Heizenergiebereitstellung und/oder Brauchwassererwaermung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Steimle, F.; Bruckmann, O.

2001-07-01

The criteria for acceptance testing of ventilation systems with integrated heat recovery were specified by the Deutsches Institut fuer Bautechnik (DIBt), Berlin, for systems for heat supply to the fresh air stream (air-to-air systems). This includes requirements on the test facilities of the technical inspection services, e.g. test stand layout and measuring systems to ensure a standard accuracy. The contribution describes these requirements for the example of the test facility of the Institute of Applied Thermodynamics and Air Conditioning Engineering at Essen University. (orig.) [German] Die Pruefkriterien fuer Zulassungspruefungen von Wohnungslueftungsgeraeten mit Waermerueckgewinnung wurden, zumindest sofern es Geraete zur Waermeuebertragung an den Zuluftstrom betrifft (Luft/Luft-Technik), vom Deutschen Institut fuer Bautechnik (DIBt) in Berlin verbindlich festgelegt. Hiermit verbunden sind nicht zuletzt die Anforderungen an die Versuchsstaende der Pruefstellen zur Durchfuehrung dieser Zulassungspruefungen hinsichtlich des Aufbaus und der einzusetzenden Messtechnik, bzw. der zu erzielenden Messgenauigkeit. Der vorliegende Artikel beschreibt diese Anforderungen am Beispiel des Pruefstandes des Instituts fuer Angewandte Thermodynamik und Klimatechnik an der Universitaet Essen. (orig.)

Le contrôle des réseaux de franchise de service

OpenAIRE

Goullet , Catherine ,

2011-01-01

A franchise is defined as ?a system of marketing products and/or services?, (Code of Ethics). It is characterized by three essential elements : the provision of the franchisor's distinctive signs and trade-marks, in-house training, and supervisory services throughout the length of the contract. The franchisor grants the franchisee the right to operate a concept with the requirement that he comply with all the rules and procedures developed by the franchisor. This inter-organizational relation...

Nuclear licensing and supervision in Germany

International Nuclear Information System (INIS)

1996-06-01

The legal instrument for implementing the licensing and supervisory procedure is specified by statutory ordinances, guidelines and provisions. The licensing requirements for nuclear power plants on the final storage of radioactive wastes in the federal republic of germany are described. The nuclear facilities are subject to continuous state supervision after they have been granted. The appendix gives a brief account of the most important ordinances relating to the AtG and extracts from the Nuclear Safety Convention. (HP)

Measuring variability of procedure progression in proceduralized scenarios

International Nuclear Information System (INIS)

Kim, Yochan; Park, Jinkyun; Jung, Wondea

2012-01-01

Highlights: ► The VPP measure was developed to quantify how differently operators follow the procedures. ► Sources that cause variability of ways to follow a given procedure were identified. ► The VPP values for the scenarios are positively related to the scenario performance time. ► The VPP measure is meaningful for explaining characteristics of several PSFs. -- Abstract: Various performance shaping factors (PSFs) have been presented to explain the contributors to unsafe acts in a human failure event or predict a human error probability of new human performance. However, because most of these parameters of an HRA depend on the subjective knowledge and experience of HRA analyzers, the results of an HRA insufficiently provide unbiased standards to explain human performance variations or compare collected data with other data from different analyzers. To secure the validity of the HRA results, we propose a quantitative measure, which represents the variability of procedure progression (VPP) in proceduralized scenarios. A VPP measure shows how differently the operators follow the steps of the procedures. This paper introduces the sources of the VPP measure and relevance to PSFs. The assessment method of the VPP measure is also proposed, and the application examples are shown with a comparison of the performance time. Although more empirical studies should be conducted to reveal the relationship between the VPP measure and other PSFs, it is believed that the VPP measure provides evidence to quantitatively evaluate human performance variations and to cross-culturally compare the collected data.

Electric Co'Co' bi-voltage locomotive class EG 3100 of DSB; Co'Co'-Zweifrequenzlokomotive EG 3100 fuer Danske Statsbaner

Energy Technology Data Exchange (ETDEWEB)

Pedersen, B.O. [DSB Materiel Technik, Copenhagen (Denmark); Joergensen, O.A. [Siemens AG, Erlangen (Germany). Abt. VT 62; Proell, J. [Siemens AG, Muenchen (Germany). Abt. VT 68

2000-12-01

DSB has purchased a series of heavy electric locomotives for hauling transit freight trains between Central Europe and Scandinavia. Demands, basic features and technical components are described in detail. (orig.) [German] Fuer den Transitgueterverkehr zwischen Mitteleuropa und Skandinavien hat Danske Statsbaner eine Serie schwerer elektrischer Lokomotiven beschafft. Die Anforderungen, das Grundkonzept und die technischen Komponenten werden ausfuehrlich beschrieben. (orig.)

Electric Co'Co' bi-voltage locomotive class EG 3100 of DSB; Co'Co'-Zweifrequenzlokomotive EG 3100 fuer Danske Statsbaner

Energy Technology Data Exchange (ETDEWEB)

Pedersen, B.O. [DSB Materiel Technik, Copenhagen (Denmark); Joergensen, O.A. [Siemens AG, Erlangen (Germany). Abt. VT 62; Proell, G. [Siemens AG, Muenchen (Germany). Abt. VT 68

2001-07-01

DSB has purchased a series of heavy electric locomotives for hauling transit freight trains between Central Europe and Scandinavia. Demands, basic features and technical components are described in detail. (orig.) [German] Fuer den Transitgueterverkehr zwischen Mitteleuropa und Skandinavien hat Danske Statsbaner eine Serie schwerer elektrischer Lokomotiven beschafft. Die Anforderungen, das Grundkonzept und die technischen Komponenten werden ausfuehrlich beschrieben. (orig.)

Building with future perspectives - the present challenge; Geaeude mit Zukunft - die Herausforderung heute

Energy Technology Data Exchange (ETDEWEB)

Kranz, H.R. [Siemens AG, Karlsruhe (Germany)

1995-12-31

In chapter 2 of the anthology about building control the following aspects are discussed: planning of electronic flexibility, requirements to plants and system and operation of technical building systems. (BWI) [Deutsch] Kapitel 2 des Sammelbandes ueber Building Control geht auf golgende Themen ein: Planung der elektronischen Gelenkigkeit, Anforderungen an Anlagen und Systeme sowie Betreiben der Technischen Gebaeudesysteme. (BWI)

Procedural sedation analgesia

OpenAIRE

Sheta, Saad A

2010-01-01

The number of noninvasive and minimally invasive procedures performed outside of the operating room has grown exponentially over the last several decades. Sedation, analgesia, or both may be needed for many of these interventional or diagnostic procedures. Individualized care is important when determining if a patient requires procedural sedation analgesia (PSA). The patient might need an anti-anxiety drug, pain medicine, immobilization, simple reassurance, or a combination of these interve...

RTE - annual report 2006

International Nuclear Information System (INIS)

2006-01-01

Expenditure), Employment Information (Statistics, Organisation and Working Hours, Remuneration, Working Relations and Collective Agreements, Health and Safety, Training, Employment and Integration of Disabled Employees, Social Activities, The Importance of Sub-Contracting); 6 - Annual Financial Statements: Balance Sheet (Balance Sheet Assets, Balance Sheet Equity and Liabilities), Income Statement, notes (Fiscal 2006 - Highlights, Accounting Principles, Rules and Methods (Information on the Balance Sheet and Income Statement, Financial Commitments and Further Information, Report of the Statutory Auditors); 7 - Report of the Chairman of the Supervisory Board: Corporate Governance (Supervisory Board Membership, Supervisory Board Operation, Supervisory Board Work, Economic Supervisory and Audit Committee), RTE Internal Control (Internal Control Policy, Resources Implemented, Targeted Controls in 2006, Control Procedures on the Reliability of Financial Information, Prospects for 2007)

HASL procedures manual

International Nuclear Information System (INIS)

Harley, J.H.

1977-08-01

Additions and corrections to the following sections of the HASL Procedures Manual are provided: General, Sampling, Field Measurements; General Analytical Chemistry, Chemical Procedures, Data Section, and Specifications

Transversal of Procedure Elements in a Computerized Procedure System

Energy Technology Data Exchange (ETDEWEB)

Jung, Yeonsub [KHNP Central Research Institute, Daejeon (Korea, Republic of)

2014-05-15

APR1400 MCR(Main Control Room) has introduced CPS(Computerized Procedure System). APR400 CPS is framed with overview pane, step detail pane, and monitoring pane. The overview shows the step in one dimensional array. Diagram in the step detail pane is called as flowlogic diagram. The flowlogic diagram has advantage of being intuitive and not being segmented so that the interfaces are easy to follow and understand. While developing CPS software or training operators these interfaces, however, there is still areas to refine behaviors of flowlogic diagram. If flowlogic diagram has contingency instructions, it is sometime difficult to interpret it properly. Therefore this paper is trying to explain behavior of flowlogic diagram in view of procedure elements. Procedure execution can be called as transversal of steps and instructions in flowlogic diagram. Both hierarchy of procedures elements and flowlogic diagram provides useful framework to test transversal with completeness. Navigation button behaviors are interpreted in view of flowlogic diagram. The framework and flowlogic diagram can be further applied to improve CPS user interfaces.

Pollutant Assessments Group procedures manual: Volume 2, Technical procedures

Energy Technology Data Exchange (ETDEWEB)

1992-03-01

This is volume 2 of the manuals that describes the technical procedures currently in use by the Pollution Assessments Group. This manual incorporates new developments in hazardous waste assessment technology and administrative policy. Descriptions of the equipment, procedures and operations of such things as radiation detection, soil sampling, radionuclide monitoring, and equipment decontamination are included in this manual. (MB)

EML procedures manual

International Nuclear Information System (INIS)

Volchok, H.L.; de Planque, G.

1982-01-01

This manual contains the procedures that are used currently by the Environmental Measurements Laboratory of the US Department of Energy. In addition a number of analytical methods from other laboratories have been included. These were tested for reliability at the Battelle, Pacific Northwest Laboratory under contract with the Division of Biomedical and Environmental Research of the AEC. These methods are clearly distinguished. The manual is prepared in loose leaf form to facilitate revision of the procedures and inclusion of additional procedures or data sheets. Anyone receiving the manual through EML should receive this additional material automatically. The contents are as follows: (1) general; (2) sampling; (3) field measurements; (4) general analytical chemistry; (5) chemical procedures; (6) data section; (7) specifications

Environmental procedures

International Nuclear Information System (INIS)

1992-01-01

The European Bank has pledged in its Agreement to place environmental management at the forefront of its operations to promote sustainable economic development in central and eastern Europe. The Bank's environmental policy is set out in the document titled, Environmental Management: The Bank's Policy Approach. This document, Environmental Procedures, presents the procedures which the European Bank has adopted to implement this policy approach with respect to its operations. The environmental procedures aim to: ensure that throughout the project approval process, those in positions of responsibility for approving projects are aware of the environmental implications of the project, and can take these into account when making decisions; avoid potential liabilities that could undermine the success of a project for its sponsors and the Bank; ensure that environmental costs are estimated along with other costs and liabilities; and identify opportunities for environmental enhancement associated with projects. The review of environmental aspects of projects is conducted by many Bank staff members throughout the project's life. This document defines the responsibilities of the people and groups involved in implementing the environmental procedures. Annexes contain Environmental Management: The Bank's Policy Approach, examples of environmental documentation for the project file and other ancillary information

Environmental Information System Baden-Wuerttemberg, RIPS 2016. Spatial information and planning system; Umweltinformationssystem Baden-Wuerttemberg. Konzeption RIPS 2016. Raeumliches Informations- und Planungssystem

Energy Technology Data Exchange (ETDEWEB)

Weissenbach, Kurt; Czommer, Olaf; Ellmenreich, Bastian (eds.)

2016-04-21

The Spatial Information and Planning System (RIPS), as the overarching component of the Environmental Information System Baden-Wuerttemberg (UIS BW), implements the environmental and nature conservation-specific geoinformation-related requirements taking into account applicable framework conditions. To this end, RIPS offers tailor-made services on the basis of a standardized and in transnational cooperation developed technical kit for the areas of geodata processing and management as well as the development and provision of software components with geo-functions and geodata services as part of the technical and information procedures. The coordination and steering takes place via project development offices, working groups and committees in close coordination with the departments of environmental and nature conservation administration as well as further cooperation and in coordination with other specialist administrations. Taking into account changed framework conditions and new geo-referenced requirements in UIS BW, the present RIPS concept focuses on future-oriented geofunction and geodata management in the field of environmental and nature conservation management as well as the provision of geo-specialized environmental and nature conservation data for policy makers, administrators and the public on innovative technologies Applications and Services. [German] Das Raeumliche Informations- und Planungssystem (RIPS) setzt als uebergreifende Komponente des Umweltinformationssystems Baden-Wuerttemberg (UIS BW) die umwelt- und naturschutzspezifischen geoinformationsbezogenen Anforderungen unter Beruecksichtigung geltender Rahmenbedingungen um. Hierzu bietet RIPS massgeschneiderte Dienstleistungen auf der Basis eines standardisierten und in laenderuebergreifenden Kooperationen entwickelten technischen Baukastens fuer die Bereiche Geodatenverarbeitung und -management sowie die Entwicklung und Bereitstellung von Softwarekomponenten mit Geofunktionen und Geodatendiensten

Civil Procedure In Denmark

DEFF Research Database (Denmark)

Werlauff, Erik

scientific activities conducted by the author, partly based on the author's experience as a member, through a number of years, of the Danish Standing Committee on Procedural Law (Retsplejeraadet), which on a continuous basis evaluates the need for civil procedural reforms in Denmark, and finally also based......The book contains an up-to-date survey of Danish civil procedure after the profound Danish procedural reforms in 2007. It deals with questions concerning competence and function of Danish courts, commencement and preparation of civil cases, questions of evidence and burden of proof, international...... procedural questions, including relations to the Brussels I Regulation and Denmark's participation in this Regulation via a parallel convention with the EU countries, impact on Danish civil procedure of the convention on human rights, preparation and pronouncement of judgment and verdict, questions of appeal...

Complexity of Resilient Power Distribution Networks

International Nuclear Information System (INIS)

May, Michael

2008-01-01

Power Systems in general and specifically the problems of communication, control, and coordination in human supervisory control of electric power transmission and distribution networks constitute a good case study for resilience engineering. Because of the high cost and high impact on society of transmission disturbances and blackouts and the vulnerability of power networks to terrorist attacks, Transmission Systems Operators (TSOs) are already focusing on organizational structures, procedures, and technical innovations that could improve the flexibility and robustness of power Systems and achieve the overall goal of providing secure power supply. For a number of reasons however the complexity of power Systems is increasing and new problems arise for human supervisory control and the ability of these Systems to implement fast recovery from disturbances. Around the world power Systems are currently being restructured to adapt to regional electricity markets and secure the availability, resilience and sustainability of electric power generation, transmission and distribution. This demands a reconsideration of the available decision support, the activity of human supervisory control of the highly automated processes involved and the procedures regulating it, as well as the role of the TSOs and the regional, national and international organizations set up to manage their activity. Unfortunately we can expect that human supervisory control of power Systems will become more complex in the near future for a number of reasons. The European Union for the Co-ordination of Transmission of Electricity (UCTE) has remarked that although the interconnected Systems of power transmission networks has been developed over the years with the main goal of providing secure power supply through common use of reserve capacities and the optimization of the use of energy resources, today's market dynamics imposing a high level of cross-border exchanges is 'out of the scope of the

Specifications for refrigerating transport. More rigid temperature specifications for cooling transport; Anforderungen im Transportkaeltebereich. Erhoehte Anforderungen beim Kuehltransport wegen verschaerfter Temperaturvorschriften

Energy Technology Data Exchange (ETDEWEB)

Grosskopf, P [Frigoblock Grosskopf GmbH, Essen (Germany)

2002-09-01

The recommendations of the Federal Institute of Consumer Health Protection and Veterinary Medicine (Bundesinstitut fuer gesundheitlichen Verbraucherschutz und Veterinaermedizin, BgVV), which sums up all German and European temperature specifications for fresh and refrigerated products, as well as the new Ordinance on Refrigerated food (Verordnung ueber tiefgefrorene Lebensmittel, TLMV) and the new German Ordinance on Food Hygiene (Lebensmittelhygieneverordnjung,LMHV) including temperature monitoring specifications according to HACCP, induced these associations to draw up practical recommendations and guidelines for their members. [German] Die Temperaturempfehlungen des Bundesinstituts fuer gesundheitlichen Verbraucherschutz und Veterinaermedizin (BgVV), die alle deutschen und europaeischen Temperaturvorschriften fuer Frisch- und Tiefkuehlprodukte zusammenfassen sowie die Neufassung der Verordnung ueber tiefgefrorene Lebensmittel (TLMV) und die neue bundeseinheitliche Lebensmittelhygiene-Verordnung (LMHV) inkl. der Temperaturueberwachungsvorschriften gemaess HACCP, haben die betroffenen Verbaende veranlasst, entsprechende Praxisempfehlungen und Leitlinien fuer ihre Mitglieder zu erarbeiten. (orig.)

INTRODUCTION TO MANAGEMENT FOR INDUSTRIAL SUPERVISORS.

Science.gov (United States)

Louisiana State Vocational Curriculum Development and Research Center, Natchitoches.

SUBJECT MATTER AND SUPPLEMENTAL MATERIALS FOR USE IN CONDUCTING A 10-HOUR INDUSTRIAL SUPERVISORY TRAINING CONFERENCE IN BASIC MANAGEMENT FUNDAMENTALS AND CONCEPTS ARE PRESENTED IN THIS TEACHER GUIDE. IT WAS DEVELOPED BY A STATE COMMITTEE AS A FIRST COURSE IN A SERIES FOR SUPERVISORY PERSONNEL WHO HAVE HAD LITTLE OR NO PREVIOUS SUPERVISORY TRAINING…

Strukturelle Methoden zur durchgängigen Diagnose digitaler Automobil-Elektronik im Feld

OpenAIRE

Cook, Alejandro

2014-01-01

Die Fahrzeugtechnik nutzt die aktuellen Entwicklungen der Halbleiterindustrie, um Kunden eine enorme Anzahl ansprechender, komplexer Produkteigenschaften zu bieten. Da traditionelle, funktionale Testverfahren nicht mehr ausreichen, um den diagnostischen Anforderungen im Automobilbereich gerecht zu werden, wird die Analyse von Halbleiterdefekten zu einem wichtigen Aspekt der Qualitätssicherung. Strukturelle Testverfahren stellen bereits eine Schlüsseltechnologie für die erfolgreiche Herstel...

Sensorik für Fahrzeugrundumsicht

Science.gov (United States)

Knoll, Peter

Mit einer elektronischen Rundumsicht lassen sich zahlreiche Fahrerassistenzsysteme realisieren. Das "sehende“ Auto nimmt mithilfe von Sensoren das Fahrzeugumfeld wahr, interpretiert es, erkennt frühzeitig gefährliche Situationen, unterstützt den Fahrer und greift zukünftig immer heftiger selbsttätig in Fahrmanöver ein. Je nach Aufgabe und Anforderungen kommen verschiedene Sensoren zum Einsatz (Bild 1).

Development and evaluation of an automated system for testing current meters

Directory of Open Access Journals (Sweden)

Ezequiel Saretta

2016-02-01

Full Text Available ABSTRACT Current meters are equipment widely used for estimating flow velocity in rivers and streams. Periodic calibrations of current meters are important to ensure the quality of measurements, but the required testing facilities are complex and only available in a few institutions. However, advances in electronics and automation may contribute to developing simple and reliable calibration systems. Thus, this study aimed to develop an automated system for testing current meters, which consisted of a trapezoidal channel, a step motor, a tow car and a management system, composed of a supervisory application and microprocessed modules to control the motor and the data acquisition. Evaluations of the displacement velocity showed that it matched the reference value up to 1.85 m s-1 for a vertical-axis current meter and 2.3 m s-1 for a horizontal-axis one. The developed system showed reliability during tests, for both current meter movement and data acquisition. The management of the system based on the developed modules and the supervisory application improved its user interface, turning all the procedure into a simple task.

Electronic Procedures for Medical Operations

Science.gov (United States)

2015-01-01

Electronic procedures are replacing text-based documents for recording the steps in performing medical operations aboard the International Space Station. S&K Aerospace, LLC, has developed a content-based electronic system-based on the Extensible Markup Language (XML) standard-that separates text from formatting standards and tags items contained in procedures so they can be recognized by other electronic systems. For example, to change a standard format, electronic procedures are changed in a single batch process, and the entire body of procedures will have the new format. Procedures can be quickly searched to determine which are affected by software and hardware changes. Similarly, procedures are easily shared with other electronic systems. The system also enables real-time data capture and automatic bookmarking of current procedure steps. In Phase II of the project, S&K Aerospace developed a Procedure Representation Language (PRL) and tools to support the creation and maintenance of electronic procedures for medical operations. The goal is to develop these tools in such a way that new advances can be inserted easily, leading to an eventual medical decision support system.

Classification of radiological procedures

International Nuclear Information System (INIS)

1989-01-01

A classification for departments in Danish hospitals which use radiological procedures. The classification codes consist of 4 digits, where the first 2 are the codes for the main groups. The first digit represents the procedure's topographical object and the second the techniques. The last 2 digits describe individual procedures. (CLS)

THE EFFECTIVENESS OF PRUDENTIAL BANKING SUPERVISION: PECULIARITIES OF METHODICAL APPROACHES

Directory of Open Access Journals (Sweden)

S. Naumenkova

2015-10-01

Full Text Available Іn the article the theoretical fundamentals of the prudential banking supervision effectiveness and substantiation of approaches to calculation of the integral indicator of supervisory system compliance with the Basel Committee Core Principles were investigated. The “functional effectiveness” and “institutional effectiveness” concepts of supervisory activity were suggested. The authors have defined the influence of supervisory organizing structure on GDP growth by groups of countries in the world. The list of priority measures focused on increase of the effectiveness of prudential supervisory activity was systematized to restore sustainability of the national banking sector.

Radiation dose during angiographic procedures

International Nuclear Information System (INIS)

Lavoie, Ch.; Rasuli, P.

2001-01-01

The use of angiographic procedures is becoming more prevalent as new techniques and equipment are developed. There have been concerns in the scientific community about the level of radiation doses received by patients, and indirectly by staff, during some of these radiological procedures. The purpose of this study was to assess the level of radiation dose from angiographic procedures to patient at the Ottawa Hospital, General Campus. Radiation dose measurements, using Thermo-Luminescent Dosimeters (TLDs), were performed on more than 100 patients on various procedures. The results show that while the patient dose from the great majority of angiographic procedures is less than 2 Gy, a significant number of procedures, especially interventional procedures may have doses greater than 2 Gy and may lead to deterministic effects. (author)

Decision-making Procedures

DEFF Research Database (Denmark)

Aldashev, Gani; Kirchsteiger, Georg; Sebald, Alexander Christopher

2009-01-01

define procedures as mechanisms that influence the probabilities of reaching different endnodes. We show that for such procedural games a sequential psychological equilibrium always exists. Applying this approach within a principal-agent context we show that the way less attractive jobs are allocated...

Procedural sedation analgesia

Directory of Open Access Journals (Sweden)

Sheta Saad

2010-01-01

Full Text Available The number of noninvasive and minimally invasive procedures performed outside of the operating room has grown exponentially over the last several decades. Sedation, analgesia, or both may be needed for many of these interventional or diagnostic procedures. Individualized care is important when determining if a patient requires procedural sedation analgesia (PSA. The patient might need an anti-anxiety drug, pain medicine, immobilization, simple reassurance, or a combination of these interventions. The goals of PSA in four different multidisciplinary practices namely; emergency, dentistry, radiology and gastrointestinal endoscopy are discussed in this review article. Some procedures are painful, others painless. Therefore, goals of PSA vary widely. Sedation management can range from minimal sedation, to the extent of minimal anesthesia. Procedural sedation in emergency department (ED usually requires combinations of multiple agents to reach desired effects of analgesia plus anxiolysis. However, in dental practice, moderate sedation analgesia (known to the dentists as conscious sedation is usually what is required. It is usually most effective with the combined use of local anesthesia. The mainstay of success for painless imaging is absolute immobility. Immobility can be achieved by deep sedation or minimal anesthesia. On the other hand, moderate sedation, deep sedation, minimal anesthesia and conventional general anesthesia can be all utilized for management of gastrointestinal endoscopy.

Actor-Network Procedures

NARCIS (Netherlands)

Pavlovic, Dusko; Meadows, Catherine; Ramanujam, R.; Ramaswamy, Srini

2012-01-01

In this paper we propose actor-networks as a formal model of computation in heterogenous networks of computers, humans and their devices, where these new procedures run; and we introduce Procedure Derivation Logic (PDL) as a framework for reasoning about security in actor-networks, as an extension

Sentinel node biopsy (SNB) in malignant melanoma as same day procedure vs delayed procedure

DEFF Research Database (Denmark)

Rødgaard, Jes Christian; Kramer, Stine; Stolle, Lars B

2013-01-01

The aim of this study was to compare a delayed sentinel node biopsy (dSNB) procedure with a same-day procedure (sSNB) in malignant melanoma. In March 2012, Aarhus University Hospital went from the dSNB to the sSNB procedure defined by lymphoscintigraphy (LS) and sentinel node biopsy (SNB) perform......, essential to keep the morbidity and economic costs low, while keeping the quality of the procedure high....

Radiation protection in medicine 2002. Guide to radiation protection in the use of ionizing radiation (Strahlenschutzverordnung - StrlSchV). Revised edition with detailed explanations. 5. tot. new rev. and enl. ed.

International Nuclear Information System (INIS)

Kemmer, W.; Michalczak, H.

2003-01-01

Full text of the Guide to RAdiation Protection in Medicine; list of essential items to be considered when applying for a licence for the handling of sealed or unsealed radioactives substances; hints and instructions concerning application forms in procedures for thelicensing of installations for the generation of ionizing radiation; rules concerning inspection deadlines for testing the impermeability of the packing of sealed radioactive substances; list of the supervisory authorities of the German states responsible for supervision in the medical field; DIN norms and drafts relating to radiology

Air Force Contract Management Division Aircrew Standardization and Evaluation: A Handbook for Government Flight Representatives.

Science.gov (United States)

1985-04-01

and all boldface procedures. In addition, include questions from AFR 60-16 and AFR 51-37. Document all such testing on memos to provide an audit trail...your contractor to use simi 1 ar forms. They will provide a clear audit trail for both you and the STAN/EVAL Inspection Team. 22 Supervisory Evaluations...OS m(Mal-j Bedil, 8 72- 3930) 190~e~br1 BJFCTFor-%at of AFForms 8 Acca -mplished by SAC Exaxiners T:AF PRO/F0 (Dot 47) 1. Certificate:- of .%ircrew

Model of Procedure Usage – Results from a Qualitative Study to Inform Design of Computer-Based Procedures

Energy Technology Data Exchange (ETDEWEB)

Johanna H Oxstrand; Katya L Le Blanc

2012-07-01

The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory, the Institute for Energy Technology, and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field operators. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do this. The underlying philosophy in the research effort is “Stop – Start – Continue”, i.e. what features from the use of paper-based procedures should we not incorporate (Stop), what should we keep (Continue), and what new features or work processes should be added (Start). One step in identifying the Stop – Start – Continue was to conduct a baseline study where affordances related to the current usage of paper-based procedures were identified. The purpose of the study was to develop a model of paper based procedure use which will help to identify desirable features for computer based procedure prototypes. Affordances such as note taking, markups

Einleitung

Science.gov (United States)

Herrmann, Christoph

Veränderungen unserer Umwelt, wie z.B. die Globalisierung und Dynamisierung der Absatz- und Beschaffungsmärkte, führen zu einer steigenden Komplexität in unternehmerischen Entscheidungssituationen. Die Dynamik der Veränderungen erfordert eine immer schnellere Anpassung der Unternehmen an ihre Umwelt (Malik 2006). Die aktive Gestaltung dieser notwendigen Anpassungen in Form des unternehmerischen Wandels wird damit zu einer entscheidenden Fähigkeit von Unternehmen (Westkämper 2002). Insbesondere für kleine und mittlere Unternehmen (KMU) stellen die rasant steigenden Anforderungen an die Anpassungsfähigkeit - auch aufgrund vielschichtiger KMU-spezifischer Faktoren (wie z.B. eine fehlende oder nur lückenhaft formulierte Unternehmensstrategie, fehlende Methodenkompetenz, etc.) - die zentrale Herausforderung für die Zukunft dar. Da KMU in der Regel in die Zulieferketten größerer Unternehmen eingebunden sind, werden zudem die Anpassungsanforderungen der großen Unternehmen an die kleinen und mittleren Unternehmen weitergegeben. Erfolgt die Anpassung von KMU an die zeitlichen, qualitativen oder kostenbezogenen Anforderungen ihrer Kunden nur langsam oder in unzureichendem Maße, verlieren KMU im Verlaufe der Zeit ihre Wettbewerbs- und damit ihre Überlebensfähigkeit (Gomez u. Hahn 1994).

[Costing nuclear medicine diagnostic procedures].

Science.gov (United States)

Markou, Pavlos

2005-01-01

To the Editor: Referring to a recent special report about the cost analysis of twenty-nine nuclear medicine procedures, I would like to clarify some basic aspects for determining costs of nuclear medicine procedure with various costing methodologies. Activity Based Costing (ABC) method, is a new approach in imaging services costing that can provide the most accurate cost data, but is difficult to perform in nuclear medicine diagnostic procedures. That is because ABC requires determining and analyzing all direct and indirect costs of each procedure, according all its activities. Traditional costing methods, like those for estimating incomes and expenses per procedure or fixed and variable costs per procedure, which are widely used in break-even point analysis and the method of ratio-of-costs-to-charges per procedure may be easily performed in nuclear medicine departments, to evaluate the variability and differences between costs and reimbursement - charges.

ANALISIS SWOT SEBAGAI UPAYA PENINGKATAN KINERJA PENGAWASAN APARAT INSPEKTORAT PROVINSI JAWA TENGAH

Directory of Open Access Journals (Sweden)

Maylia Pramono Sari

2012-03-01

Full Text Available Penelitian ini berusaha menyediakan peta keuntungan, kerugian, tantangan dan kesempatan yang berkaitan dengan kinerja inspektorat (Supervisory Board. Hasil dari penelitian ini adalah bahwa untuk meningkatkan kinerjanya, Inspectorat (Supervisory Board bisa menerapkan 4 strategi yang tesedia pada matriks SWOT. Inspektorat (Supervisory Board sebaiknya bisa mengatur kekuatan dan meminimalkan kelemahan yang dimiliki, memanfaatkan kesempatan yang berhubungan de-ngan tantangan dalam bentuk sumber daya manusia, anggaran, teknologi informasi dan struktur organisasi yang tepat. This study attempts to provide mapping of the advantages, disadvantages, challenges, and opportunities associated with the performance of the Inspectorate (Supervisory Board. The results indicate that for improving the performance, the Inspectorate (Supervisory Board of Central Java Province can apply one of the four strategies that are available on TOWS matrix above. The four strategies that can be selected are SO Strategy (Strengths-Opportunities, WO Strategy (Weakness-Opportunities, ST Strategy (Strengths-Threats, and WT Strategy (Weakness-Threats. It is suggested that for improving its performance, the Inspectorate (Supervisory Board should be able to maintain power and minimize the weaknesses possessed; exploit opportunities and deal with the existing challenges in the form of HR, Budget, Information Technology, and proper Organizational Structure.

The competitive concession assignment according to paragraph 46 EnWG. Procedure without rules and arbitrators; Die wettbewerbliche Vergabe von Konzessionen nach paragraph 46 EnWG. Verfahren ohne Regeln und Schiedsrichter?

Energy Technology Data Exchange (ETDEWEB)

Schau, Goetz-Friedrich [Niedersaechsisches Ministerium fuer Wirtschaft, Arbeit und Verkehr, Hannover (Germany). Landeskartellbehoerde

2011-01-15

Presently, the concession assignment regarding to paragraph 46 EnWG (Energy Economy Law) has a great practical significance. For the first time, the concession assignment proceeds in the background of the liberalized and regulated electricity and natural gas markets. The half-hearted legal obligation to the competition of concession as well as the so far dormant supervisory authorities result in a substantial juridical insecurity in the process at the expense of the competitor.

FREY’S PROCEDURE- TO ANALYSE THE OUTCOME OF THIS PROCEDURE IN CHRONIC PANCREATITIS

Directory of Open Access Journals (Sweden)

Shilpa Mariappa Casaba

2017-04-01

Full Text Available BACKGROUND Chronic Pancreatitis (CP is a progressive inflammatory disease characterised by debilitating pain and pancreatic insufficiency. There is enormous personal and socio-economic impact on impairment of quality of life, inability to work and even shortening of life expectancy. Although, pancreaticoduodenectomy had been considered the standard surgical procedure for patients with CP because of its high post-op complications with exocrine and endocrine insufficiency, it is not preferred. This has led to a hybrid procedure described by Frey’s, which is used in our study for CP. We aim to analyse the short-term and long-term outcomes of Frey’s procedure at a tertiary care center in patients with chronic pancreatitis. MATERIALS AND METHODS A retrospective review of all CP patients who underwent Frey procedure were reviewed from January 2007-January 2016. Perioperative variables, short-term (30 days and long-term (3 years outcomes were reviewed. Data are frequency (% or mean. RESULTS A total of 97 patients underwent Frey’s procedure. A total of 72 (70.7% were men and 25 (29.3% were women. Mean age was 38 years (range 14-66 years. Indications for surgery included intractable pain (n=97, 100% and obstructive jaundice (n=4, 4.3%. 9 patients (32.6% were diabetic preoperatively. Concomitant procedures include biliary drainage procedure was done for 4 patients (4.3%, i.e. choledochojejunostomy and splenectomy for 2 patients (2.1%, cholecystectomy (n=6, 6%. Short-term outcomes include surgical site infection (n=10, 10%, pancreatic leak (n=6, 5.82% and 2 patients required reoperation for bleeding and no mortality (30 days, diabetic ketoacidosis (n=2, 2%. Pancreatic carcinoma was detected in 3 (2.1% patients. Long-term outcomes include pain free status (n=80, 86.9%, median follow-up of 3 years. Redo pancreatic procedure was performed in 1 (4.3% for anastomotic leak. CONCLUSION Frey’s procedure is a safe and effective pain palliative option for CP

Procedure for taking physical inventories

International Nuclear Information System (INIS)

Anon.

1981-01-01

This session is intended to apprise one of the various aspects of procedures and routines that Exxon Nuclear uses with respect to its nuclear materials physical inventory program. The presentation describes how plant physical inventories are planned and taken. The description includes the planning and preparation for taking the inventory, the clean-out procedures for converting in-process material to measurable items, the administrative procedures for establishing independent inventory teams and for inventorying each inventory area, the verification procedures used to include previously measured tamper-safed items in the inventory, and lastly, procedures used to reconcile the inventory and calculate MUF (materials unaccounted for). The purpose of the session is to enable participants to: (1) understand the planning and pre-inventorty procedures and their importance; (2) understand the need for and the required intensity of clean-out procedures; (3) understand how inventory teams are formed, and how the inventory is conducted; (4) understand the distinction between inventory previously measured tamper-safed items and other materials not so characterized; (5) understand the reconciliation procedures; and (6) calculate a MUF given the book and inventory results

In-Trail Procedure Air Traffic Control Procedures Validation Simulation Study

Science.gov (United States)

Chartrand, Ryan C.; Hewitt, Katrin P.; Sweeney, Peter B.; Graff, Thomas J.; Jones, Kenneth M.

2012-01-01

In August 2007, Airservices Australia (Airservices) and the United States National Aeronautics and Space Administration (NASA) conducted a validation experiment of the air traffic control (ATC) procedures associated with the Automatic Dependant Surveillance-Broadcast (ADS-B) In-Trail Procedure (ITP). ITP is an Airborne Traffic Situation Awareness (ATSA) application designed for near-term use in procedural airspace in which ADS-B data are used to facilitate climb and descent maneuvers. NASA and Airservices conducted the experiment in Airservices simulator in Melbourne, Australia. Twelve current operational air traffic controllers participated in the experiment, which identified aspects of the ITP that could be improved (mainly in the communication and controller approval process). Results showed that controllers viewed the ITP as valid and acceptable. This paper describes the experiment design and results.

Electronic procedure distribution

International Nuclear Information System (INIS)

Slone, B.J. III; Richardson, C.E.

1993-01-01

Printed procedures can offer a mix of text and graphic information that improves readability and increases understanding. A typical procedure uses illustrations and graphics to clarify concepts, a variety of type styles and weights to make it easier to find different topics and sections, white space to improve readability, and familiar navigational clues such as page numbers and topic headers. Initially, electronic procedure systems had limited typeface options, often only a single typeface, with no capability for enhancing readability by varying type size bolding, italicizing, or underlining, and no ability to include graphics. Even recently, many text-only electronic procedures were originally created in a modern What-You-See-Is-What-You-Get (WYSI-WYG) document authoring system, only to be converted to pages and pages of plain type for electronic distribution. Given the choice of paper or on-line producers, most users have chosen paper for its readability. But current-generation electronic document systems that use formatted text and embedded graphics offer users vastly improved readability. Further, they are offering ever-better search tools to enable rapid location of material of interest

Measurement of chloride and sulfate in residues from municipal solid waste incineration; Bestimmung von Chlorid und Sulfat in Reststoffen aus der thermischen Abfallbehandlung

Energy Technology Data Exchange (ETDEWEB)

Simon, F.G. [ABB Forschungszentrum, Abt. Umwelttechnologien, Baden-Daettwil (Switzerland); Birkenberger, R. [ABB Forschungszentrum, Abt. Umwelttechnologien, Baden-Daettwil (Switzerland); Schmidt, V. [ABB Forschungszentrum, Abt. Umwelttechnologien, Baden-Daettwil (Switzerland); Levina, M. [ABB Forschungszentrum, Abt. Umwelttechnologien, Baden-Daettwil (Switzerland)

1996-03-01

The concentrations of the chloride and sulfate in waste incineration ashes and leachate of these solids have been measured with ionselective electrodes and the ion chromotography. The results are compared with the legislative requirements. (orig.) [Deutsch] Die Konzentrationen der Anionen Chlorid und Sulfat in Abfallverbrennungsaschen sowie in Eluaten dieser Stoffe wurden mit ionenselektiven Elektroden und der Ionenchromotographie gemessen. Die Resultate werden mit den gesetzlichen Anforderungen verglichen. (orig.)

Rezension von: Julia Reuter, Paula-Irene Villa (Hg.: Postkoloniale Soziologie. Empirische Befunde, theoretische Anschlüsse, politische Intervention. Bielefeld: transcript Verlag 2010.

Directory of Open Access Journals (Sweden)

Ruth Streicher

2010-05-01

Full Text Available Welche Inspirationen und Anforderungen ergeben sich aus dem Projekt der ‚Dekolonisierung‘ der Soziologie auf der theoretischen, konzeptionellen und empirischen Ebene für die deutsche soziologische Debatte? Die im Band versammelten Beiträge bieten erste Versuche zur Beantwortung dieser Fragen. Während Selbstreflexivität großgeschrieben wird, mangelt es auch diesem Band noch an empirischer Fundierung der postkolonialen Kritik.

Eine Technologie für das durchgängige und automatisierte Testen eingebetteter Software

OpenAIRE

Fischer, Till

2016-01-01

Eingebettete Systeme unterliegen Anforderungen, die den Test der Software erforderlich machen. Zur Automatisierung werden dabei verschiedene Technologien eingesetzt: Für den Test nah am Quelltext sind spezielle Unit-Test Werkzeuge erforderlich, der Test von Steuer- und Regelfunktionen erfordert Model-, Software- und Hardware-in-the-Loop Werkzeuge. In dieser Arbeit wird deren Integrierbarkeit untersucht. Der Fokus liegt auf einer neuen Programmiersprache zur Implementierung von Testfällen.

Eine Technologie für das durchgängige und automatisierte Testen eingebetteter Software

OpenAIRE

Fischer, Till

2017-01-01

Eingebettete Systeme unterliegen Anforderungen, die den Test der Software erforderlich machen. Zur Automatisierung werden dabei verschiedene Technologien eingesetzt: Für den Test nah am Quelltext sind spezielle Unit-Test Werkzeuge erforderlich, der Test von Steuer- und Regelfunktionen erfordert Model-, Software- und Hardware-in-the-Loop Werkzeuge. In dieser Arbeit wird deren Integrierbarkeit untersucht. Der Fokus liegt auf einer neuen Programmiersprache zur Implementierung von Testfällen.

Temperature documentation - instrument for quality assurance; Temperaturdokumentation - Instrument der Qualitaetssicherung

Energy Technology Data Exchange (ETDEWEB)

Hegglin, A [Wurm AG, Winterthur (Switzerland)

2000-10-01

Important inspection points of a HACCP concept are the temperatures. On the basis of the demands for a systematic temperature documentation, the application of control systems and instruments is described by several examples. (orig.) [German] Wichtige Kontrollpunkte eines HACCP-Konzepts sind die Temperaturen. Ausgehend von den Anforderungen, die an eine systematische Temperaturedokumentation gestellt werden, wird der Einsatz geeigneter Regel- und Ueberwachungsgeraete an mehreren Beispielen erlaeutert. (orig.)

Fuel cells in railway systems. Project report; Brennstoffzellen im Schienenverkehr. Projektbericht

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-06-01

The project report describes the state of the art of fuel cell technology and the specific requirements of railway systems. Potential applications in the state of Schleswig-Holstein are gone into. [German] In diesem Projektbericht wird der Stand der Brennstoffzellentechnik und die Entwicklung von Anforderungen des Schienenverkehrs an diese Technik ermittelt. Darueber hinaus wird untersucht, inwieweit eine Modellregion Schleswig-Holstein zur weiteren Entwicklung der Technik beitragen kann.

Entwicklung und Evaluation computerbasierter Trainingsaufgaben für das wissenschaftliche Schreiben

OpenAIRE

Proske, Antje

2006-01-01

Wissenschaftliches Schreiben ist eine sehr komplexe Aufgabe, die eine Vielzahl unterschiedlicher Aktivitäten umfasst. Viele Studierende haben jedoch Schwierigkeiten, die damit verbundenen Anforderungen selbständig zu bewältigen. Im Mittelpunkt des Interesses der vorliegenden Arbeit stand daher die Entwicklung und Evaluation interaktiver computerbasierter Trainingsaufgaben, die Studienanfänger beim Erwerb von Grundkompetenzen des wissenschaftlichen Schreibens unterstützen. Zentrale Anliegen di...

Entwicklung von Extraktions- und Absorptionssystemen auf Basis ionischer Flüssigkeiten für die Entschwefelung von Kohlenwasserstoffen

OpenAIRE

Kuhlmann, Esther

2008-01-01

Da die Anforderungen an den Schwefelgehalt der fossilen Brennstoffe - nicht zuletzt durch gesetzliche Richtlinien bezüglich der Schadstoffemissionen - im Laufe der Zeit ständig gestiegen sind, sind effektive Entschwefelungsverfahren für fossile Brennstoffe von hohem Interesse. Die derzeitige Entschwefelungstechnologie basiert auf dem HDS-Verfahren, alternative Verfahren sind aber wünschenswert, insbesondere wenn Anwendungen einen Schwefelgehalt von weit unter 10 ppm erforderlich machen. Daher...

Bildgebendes Multispektralsystem zur Serienfarbmessung an goniochromatischen Oberflächenbeschichtungen in der Automobil- und Zulieferindustrie

OpenAIRE

Jäger, Stefan

2006-01-01

In dieser Arbeit wird ein multispektrales bildgebendes System zur Farbmessung von Metall- und Perleffektlacken in einem industriellen Umfeld vorgestellt. Der Zweck des vorgeschlagenen Systems ist die Serienüberwachung und daraus folgend, die Steuerung von Lackierprozessen in der Automobil- und Zulieferindustrie, um das Qualitätsniveau anzuheben und Kosten zu reduzieren. Ausgehend von der Analyse der messtechnischen Anforderungen und den durch die Prozesstechnik gegebenen Randbedingungen wurde...

Modified arthroscopic Brostrom procedure.

Science.gov (United States)

Lui, Tun Hing

2015-09-01

The open modified Brostrom anatomic repair technique is widely accepted as the reference standard for lateral ankle stabilization. However, there is high incidence of intra-articular pathologies associated with chronic lateral ankle instability which may not be addressed by an isolated open Brostrom procedure. Arthroscopic Brostrom procedure with suture anchor has been described for anatomic repair of chronic lateral ankle instability and management of intra-articular lesions. However, the complication rates seemed to be higher than open Brostrom procedure. Modification of the arthroscopic Brostrom procedure with the use of bone tunnel may reduce the risk of certain complications. Copyright © 2015 European Foot and Ankle Society. Published by Elsevier Ltd. All rights reserved.

Support of the Ukrainean Supervisory Authority during the extension of the improved operational NCP monitoring. Final report part III; Unterstuetzung der ukrainischen Aufsichtsbehoerde beim Ausbau der verbesserten betrieblichen KKW-Ueberwachung. Abschlussbericht Teil III

Energy Technology Data Exchange (ETDEWEB)

Beyer, M.; Carl, H.

2005-05-01

Technical systems to improve the operational monitoring for the three units of the South Ukraine NPP and for the 1{sup st} unit of the Chmelnitzky NPP were put up by analogy with the systems for the Zaporoshye NPP and the Rovno NPP. For that up to 51 safety-relevant technological and 16 radiological parameters from every unit are available to the supervisory authority on-site and in the crisis centre in Kiev for collection and assessment. These parameters are transferred on-line by modern technical equipment once a minute. The developed evaluation software enables the visualisation of the monitoring results in form of diagrams, charts and graphs. By means of an archive modus the trends of all parameters can be analysed. With the integration of the technical equipment delivered for the sheltered room of the Zaporoshye NPP into the on-site existing remote monitoring system is it now possible to record and to evaluate essential safety-relevant parameters of the whole NPP also during severe accidents by means of modern technical equipment. (orig.)

Comparing the operators' behavior in conducting emergency operating procedures with the complexity of procedural steps

International Nuclear Information System (INIS)

Park, Jin Kyun; Jung, Won Dea

2003-01-01

Many kinds of procedures have been used to reduce the operators' workload throughout various industries. However, significant portion of accidents or incidents was caused by procedure related human errors that are originated from non-compliance of procedures. According to related studies, several important factors for non-compliance behavior have been identified, and one if them is the complexity of procedures. This means that comparing the change of the operators' behavior with the complexity of procedures may be meaningful for investigating plausible reasons for the operators' non-compliance behavior. In this study, emergency training records were collected using a full scope simulator in order to obtain data related to the operators' non-compliance behavior. And then, collected data are compared with the complexity of procedural steps. As the result, two remarkable relationships are found, which indicate that the operators' behavior could be reasonably characterized by the complexity of procedural steps. Thus, these relationships can be used as meaningful clues not only to scrutinize the reason of non-compliance behavior but also to suggest appropriate remedies for the reduction of non-compliance behavior that can result in procedure related human errors

Standardized Procedure Content And Data Structure Based On Human Factors Requirements For Computer-Based Procedures

International Nuclear Information System (INIS)

Bly, Aaron; Oxstrand, Johanna; Le Blanc, Katya L

2015-01-01

Most activities that involve human interaction with systems in a nuclear power plant are guided by procedures. Traditionally, the use of procedures has been a paper-based process that supports safe operation of the nuclear power industry. However, the nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. Advances in digital technology make computer-based procedures (CBPs) a valid option that provides further enhancement of safety by improving human performance related to procedure use. The transition from paper-based procedures (PBPs) to CBPs creates a need for a computer-based procedure system (CBPS). A CBPS needs to have the ability to perform logical operations in order to adjust to the inputs received from either users or real time data from plant status databases. Without the ability for logical operations the procedure is just an electronic copy of the paper-based procedure. In order to provide the CBPS with the information it needs to display the procedure steps to the user, special care is needed in the format used to deliver all data and instructions to create the steps. The procedure should be broken down into basic elements and formatted in a standard method for the CBPS. One way to build the underlying data architecture is to use an Extensible Markup Language (XML) schema, which utilizes basic elements to build each step in the smart procedure. The attributes of each step will determine the type of functionality that the system will generate for that step. The CBPS will provide the context for the step to deliver referential information, request a decision, or accept input from the user. The XML schema needs to provide all data necessary for the system to accurately perform each step without the need for the procedure writer to reprogram the CBPS. The research team at the Idaho National Laboratory has developed a prototype CBPS for field workers as well as the

Standardized Procedure Content And Data Structure Based On Human Factors Requirements For Computer-Based Procedures

Energy Technology Data Exchange (ETDEWEB)

Bly, Aaron; Oxstrand, Johanna; Le Blanc, Katya L

2015-02-01

Most activities that involve human interaction with systems in a nuclear power plant are guided by procedures. Traditionally, the use of procedures has been a paper-based process that supports safe operation of the nuclear power industry. However, the nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. Advances in digital technology make computer-based procedures (CBPs) a valid option that provides further enhancement of safety by improving human performance related to procedure use. The transition from paper-based procedures (PBPs) to CBPs creates a need for a computer-based procedure system (CBPS). A CBPS needs to have the ability to perform logical operations in order to adjust to the inputs received from either users or real time data from plant status databases. Without the ability for logical operations the procedure is just an electronic copy of the paper-based procedure. In order to provide the CBPS with the information it needs to display the procedure steps to the user, special care is needed in the format used to deliver all data and instructions to create the steps. The procedure should be broken down into basic elements and formatted in a standard method for the CBPS. One way to build the underlying data architecture is to use an Extensible Markup Language (XML) schema, which utilizes basic elements to build each step in the smart procedure. The attributes of each step will determine the type of functionality that the system will generate for that step. The CBPS will provide the context for the step to deliver referential information, request a decision, or accept input from the user. The XML schema needs to provide all data necessary for the system to accurately perform each step without the need for the procedure writer to reprogram the CBPS. The research team at the Idaho National Laboratory has developed a prototype CBPS for field workers as well as the

Pelvic denervation procedures for dysmenorrhea.

Science.gov (United States)

Ramirez, Christina; Donnellan, Nicole

2017-08-01

Chronic pelvic pain and dysmenorrhea are common conditions affecting reproductive-age women. Surgical pelvic denervation procedures may be a treatment option for women with midline dysmenorrhea, in which medical management is declined by the patient, ineffective at managing symptoms, or medically contraindicated. This review describes the surgical techniques and complications associated with pelvic denervation procedures as well as the current evidence for these procedures in women with primary dysmenorrhea and dysmenorrhea secondary to endometriosis. Presacral neurectomy is the preferred pelvic denervation procedure in patients with primary dysmenorrhea and midline chronic pelvic pain associated with endometriosis. In patients with endometriosis presacral neurectomy is a useful adjunct to excision or ablation of all endometrial lesions to improve postoperative pain relief. There is no additional patient benefit of performing combined presacral neurectomy and uterine nerve ablation procedures. Pelvic denervation procedures can be performed safely and quickly with a low risk of complication if the surgeon is knowledgeable and skilled in operating in the presacral space. Patients should be adequately counseled on expected success rates and potential complications associated with pelvic denervation procedures.

The impact of a medical procedure service on patient safety, procedure quality and resident training opportunities.

Science.gov (United States)

Tukey, Melissa H; Wiener, Renda Soylemez

2014-03-01

At some academic hospitals, medical procedure services are being developed to provide supervision for residents performing bedside procedures in hopes of improving patient safety and resident education. There is limited knowledge of the impact of such services on procedural complication rates and resident procedural training opportunities. To determine the impact of a medical procedure service (MPS) on patient safety and resident procedural training opportunities. Retrospective cohort analysis comparing characteristics and outcomes of procedures performed by the MPS versus the primary medical service. Consecutive adults admitted to internal medicine services at a large academic hospital who underwent a bedside medical procedure (central venous catheterization, thoracentesis, paracentesis, lumbar puncture) between 1 July 2010 and 31 December 2011. The primary outcome was a composite rate of major complications. Secondary outcomes included resident participation in bedside procedures and use of "best practice" safety process measures. We evaluated 1,707 bedside procedures (548 by the MPS, 1,159 by the primary services). There were no differences in the composite rate of major complications (1.6 % vs. 1.9 %, p = 0.71) or resident participation in bedside procedures (57.0 % vs. 54.3 %, p = 0.31) between the MPS and the primary services. Procedures performed by the MPS were more likely to be successfully completed (95.8 % vs. 92.8 %, p = 0.02) and to use best practice safety process measures, including use of ultrasound guidance when appropriate (96.8 % vs. 90.0 %, p = 0.0004), avoidance of femoral venous catheterization (89.5 vs. 82.7 %, p = 0.02) and involvement of attending physicians (99.3 % vs. 57.0 %, p < 0.0001). Although use of a MPS did not significantly affect the rate of major complications or resident opportunities for training in bedside procedures, it was associated with increased use of best practice safety process measures.

76 FR 62092 - Filing Procedures

Science.gov (United States)

2011-10-06

... INTERNATIONAL TRADE COMMISSION Filing Procedures AGENCY: International Trade Commission. ACTION: Notice of issuance of Handbook on Filing Procedures. SUMMARY: The United States International Trade Commission (``Commission'') is issuing a Handbook on Filing Procedures to replace its Handbook on Electronic...

Dynamic alarm response procedures

International Nuclear Information System (INIS)

Martin, J.; Gordon, P.; Fitch, K.

2006-01-01

The Dynamic Alarm Response Procedure (DARP) system provides a robust, Web-based alternative to existing hard-copy alarm response procedures. This paperless system improves performance by eliminating time wasted looking up paper procedures by number, looking up plant process values and equipment and component status at graphical display or panels, and maintenance of the procedures. Because it is a Web-based system, it is platform independent. DARP's can be served from any Web server that supports CGI scripting, such as Apache R , IIS R , TclHTTPD, and others. DARP pages can be viewed in any Web browser that supports Javascript and Scalable Vector Graphics (SVG), such as Netscape R , Microsoft Internet Explorer R , Mozilla Firefox R , Opera R , and others. (authors)

Nástroje bankovního dohledu v Evropské unii

OpenAIRE

Hanychová, Marie

2017-01-01

European banking supervision has recently undergone major changes, through mere co-ordination of supervisory instruments, to the full integration of supervisory instruments in one centralized institution; European Central Bank (ECB). This master thesis deals with banking supervision instruments in the European Union while emphasises the instruments entrusted to the ECB under the second pillar of the banking union; the Single Supervisory Mechanism (SSM) and aims to analyse and evaluate their r...

Delegation of Authority: Making Full Use of Your Team. Supervisory Development Conference Series. Training Guide.

Science.gov (United States)

Veterans Administration, Washington, DC.

A leader's guide for a conference on delegating authority is presented. The purposes of the conference are: (1) to emphasize the importance of delegation of authority in effective work management; (2) to discuss the theory, principles and procedures pertaining to delegation of authority; (3) to point out methods of control to decrease the…

The Swiss Federal Supreme Court: A Constitutional Assessment of Control and Management Mechanisms

Directory of Open Access Journals (Sweden)

Andreas Lienhard

2008-10-01

Full Text Available Even the highest courts are under pressure to perform effectively and efficiently. In some instances, the pressure comes from supervisory and elected authorities, such as parliaments, which demand information regarding judicial output. In Switzerland a decision has been made by the Parliament to apply “steering instruments”, which were introduced as part of general administrative reforms. These procedures also include mechanisms for “controlling” 2 judicial activity. In this article, we examine reforms relating to the Swiss Federal Supreme Court , and the compatibility of those reforms with separation of powers principles.

Procedures in diagnostic radiology

International Nuclear Information System (INIS)

Doyle, T.; Hare, W.S.C.; Thomson, K.; Tess, B.

1989-01-01

This book outlines the various procedures necessary for the successful practice of diagnostic radiology. Topics covered are: general principles, imaging of the urinary and gastrointestinal tracts, vascular radiology, arthrography, and miscellaneous diagnostic radiologic procedures

INITIATION AND CONDUCT OF ADMINISTRATIVE PROCEDURE

Directory of Open Access Journals (Sweden)

Milan Stipic

2013-12-01

Full Text Available General administrative procedure act contains legal norms that are valid for all identical cases. In addition to the general, there are special administrative procedures, customized to the specific administrative areas. Procedure initiation is regulated. Administrative procedure can be initiated at the request of the proponent and ex officio. When the official determines that the conditions for the conduct of administrative procedure are met, before making a decision, all the facts and circumstances relevant to the resolution of administrative matter have to be identified. When there are no legal requirements for the initiation of procedures, the official shall make a decision to reject the application of the party. The procedure is initiated ex officio when stipulated by law or when protection of public interest requires it. When initiating procedure ex officio, the public authority shall take into consideration the petition or other information that indicate the need to protect the public interest. In such cases the applicant is not a party, and the official is obliged to notify the applicant, if initiation of procedures is not accepted ex officio. Based on the notification, the applicant has a right to complain, including the situation when there is no response within the prescribed period of 30 days. Public authority may, therefore it is not obliged to, initiate administrative procedure by public announcement only in a situation where the parties are unknown, while it is obliged to initiate procedure by public announcement when this method of initiating the procedure is prescribed by law. Initiation of procedure with public announcement occurs in rare cases. Due to the application of efficiency and cost-effectiveness principle, two or more administrative procedures can be merged into one procedure by a conclusion. The condition for this is that the rights or obligations of the parties are based on the same legal basis and on the same or

Quantization Procedures; Sistemas de cuantificacion

Energy Technology Data Exchange (ETDEWEB)

Cabrera, J. A.; Martin, R.

1976-07-01

We present in this work a review of the conventional quantization procedure, the proposed by I.E. Segal and a new quantization procedure similar to this one for use in non linear problems. We apply this quantization procedures to different potentials and we obtain the appropriate equations of motion. It is shown that for the linear case the three procedures exposed are equivalent but for the non linear cases we obtain different equations of motion and different energy spectra. (Author) 16 refs.

Simplified Laboratory Runoff Procedure (SLRP): Procedure and Application

National Research Council Canada - National Science Library

Price, Richard

2000-01-01

The Simplified Laboratory Runoff Procedure (SLRP) was developed to provide a faster, less expensive approach to evaluate surface runoff water quality from dredged material placed in an upland environment...

COPMA-III - Intelligent handling of existing procedures

International Nuclear Information System (INIS)

Hulsund, John-Einar; Jung, Yeonsub; Nilsen, Svein

1999-04-01

This report describes how COPMA-III makes it possible to enhance old procedures without having to change much of their original layout. By means of COPMA-III one can insert into the old procedure text tags that describe the 'meaning' of the various textual elements in the procedure. Those tags can be made invisible to the person using the procedure, but the computer is able to inspect the tags and give appropriate assistance in carrying through the procedure. Previous versions of COPMA required a reformulation and most often a re-structuring of the procedures before taking them into use. A fixed set of instructions and a fixed procedure structure made the computerised procedure different from the original procedure (in most cases). This is no more so in COPMA-III. By means of small procedural elements (microelements), it is possible to configure the COPMA-III system to fit the set of instructions and the procedure structure that is being used in the old procedure system. This report describes an example case, starting with an old procedure, goes through a set of working steps and ends up with a procedure having exactly the same appearance as the old procedure, but having assistance from the COPMA-III system in executing the procedure (author) (ml)

Aesthetic procedures in office practice.

Science.gov (United States)

Small, Rebecca

2009-12-01

Since the approval of botulinum toxin, dermal fillers, and lasers for cosmetic use, minimally invasive aesthetic procedures have rapidly become the treatments of choice for age-related facial changes. In the past 10 years, aesthetic procedures have increased nearly five-fold. Of the 10.2 million aesthetic treatments performed in 2008, 83 percent were minimally invasive procedures. Botulinum toxin and dermal filler injections, laser hair reduction, chemical peels, laser skin resurfacing, microdermabrasion, and intense pulsed light photorejuvenation were the most commonly performed procedures in 2008. These procedures are effective and associated with minimal discomfort, and they have a low incidence of adverse effects and short recovery times. High patient and physician satisfaction have contributed to their growing popularity and availability in the primary care setting. As patient demand for aesthetic treatments increases, family physicians should be familiar with common minimally invasive aesthetic procedures when advising patients or incorporating aesthetic care into office practice.

Rights and Responsibilities. Supervisory Skills Module. Operational Management Programme. Increasing Opportunities for Supervisors and Managers.

Science.gov (United States)

Martin, Rodney

This self-instructional unit for supervisors and managers in the British hotel and catering industry is designed to consolidate the work covered in a 1-day course. The document begins with an introduction and advice on how to use the unit. The following topics are covered: (1) the law and personnel procedures; (2) consultation and negotiation; (3)…

Human Reliability Analysis For Computerized Procedures

International Nuclear Information System (INIS)

Boring, Ronald L.; Gertman, David I.; Le Blanc, Katya

2011-01-01

This paper provides a characterization of human reliability analysis (HRA) issues for computerized procedures in nuclear power plant control rooms. It is beyond the scope of this paper to propose a new HRA approach or to recommend specific methods or refinements to those methods. Rather, this paper provides a review of HRA as applied to traditional paper-based procedures, followed by a discussion of what specific factors should additionally be considered in HRAs for computerized procedures. Performance shaping factors and failure modes unique to computerized procedures are highlighted. Since there is no definitive guide to HRA for paper-based procedures, this paper also serves to clarify the existing guidance on paper-based procedures before delving into the unique aspects of computerized procedures.

18 CFR 301.3 - Filing procedures.

Science.gov (United States)

2010-04-01

... FOR SALES FROM UTILITIES TO BONNEVILLE POWER ADMINISTRATION UNDER NORTHWEST POWER ACT § 301.3 Filing procedures. (a) Bonneville's ASC review procedures. The procedures established by Bonneville's Administrator... Bonneville's ASC review procedures. (b) Exchange Period. The Exchange Period will be equal to the term of...

32 CFR 635.35 - Procedures.

Science.gov (United States)

2010-07-01

... 32 National Defense 4 2010-07-01 2010-07-01 true Procedures. 635.35 Section 635.35 National Defense Department of Defense (Continued) DEPARTMENT OF THE ARMY (CONTINUED) LAW ENFORCEMENT AND CRIMINAL INVESTIGATIONS LAW ENFORCEMENT REPORTING Victim and Witness Assistance Procedures § 635.35 Procedures. (a) As required by Federal law, Army personnel...

Developing, adopting and adapting operating procedures

International Nuclear Information System (INIS)

Rabouhams, J.

1986-01-01

This lecture specifies all the dispositions which have been taken by EDF Nuclear and Fossil Generation Department - according to the fact that availability and safety largely depend on the quality of the procedures and their easy handling - in order to develop, adopt and adapt the operating procedures. The following points are treated: General organization of procedures for plant operation during normal and abnormal conditions; Personnel and extend of responsibility involved into the development of procedures (research center, training center, specialized services, nuclear station, etc.); Validation of the procedures by means of full-scope simulators; Modifications of the procedures taking into account operation experience in material and human fields; Development of simulation softs in order to perform the procedures in abnormal situations; Evolution of operating technics and future skills. (orig.)

Studie: Die Generation Y und deren organisatorische Implikationen

OpenAIRE

Klein, Helmut

2016-01-01

Die vorliegende Studie betrifft die Gen. Y und ihre spezifischen Anforderungen an die Unternehmensorganisation. Im Ergebnis einer durchgeführten Befragung ist festzuhalten, dass die Gen. Y die Kernkompetenzen eines Managers verstärkt einfordert und eine hohe Betreuungsintensität verlangt. Dies hat Auswirkungen auf die Führungsspanne, Planung und Kontrolle von Aufgaben, die Gestaltung der vertikalen und horizontalen Prozesse sowie die Zusammensetzung von Teamarbeitsformen. Projektarbeit sowie ...

Viele Daten, hohe Hürden: eine Bilanz aus dem Projekt Open-Access-Statistik

OpenAIRE

Herb, Ulrich

2018-01-01

Dieser Artikel referiert die Ergebnisse des Projekts Open-Access-Statistik, dessen Ziel es war, standardisierte Nutzungszahlen für wissenschaftliche Dokumente zu erheben. Die gesammelten Nutzungsdaten sollten in erster Linie dazu dienen, Impact-Werte für Open-Access-Dokumente zu ermitteln. Das Projekt sah auch die Implementierung anspruchsvollerer Verfahren wie Netzwerk-Analysen vor, sah sich jedoch mit komplexen rechtlichen Anforderungen konfrontiert. Der Beitrag versucht überdies, Open-Acce...

Refrigeration compressor for the mobile application; Kaeltemittelverdichter fuer den mobilen Einsatz

Energy Technology Data Exchange (ETDEWEB)

Hagenlocher, T. [Bock GmbH und Co. Kaeltemaschinenfabrik, Frickenhausen (Germany)

2000-06-01

The mobile use of cooling air conditioning systems is increasingly important. Main component of this system is the refrigeration compressor. The special requirement for the compressor as well for the resulting boundary conditions are discussed. (orig.) [German] Der mobile Einsatz von Kaelte- und Klimaanlagen gewinnt zunehmend an Bedeutung. Wichtigste Komponente dieser Anlage ist der Kaeltemittelverdichter. Die speziellen Anforderungen an den Verdichter sowie an die daraus resultierenden Randbedingungen werden dargestellt. (orig.)

Ganzheitlich prozessorientierte Entscheidungsunterstützung am Beispiel der Automobillackierung : Ein Beitrag zum industriellen Stoffstrommanagement

OpenAIRE

Rosenau-Tornow, Dirk

2005-01-01

Im Rahmen der sich verknappenden Ressourcen, der Anforderungen durch die Umweltgesetzgebung sowie des Gedankens einer nachhaltigen Entwicklung wird es für Unternehmen zunehmend wichtiger, den Aufwand für die Herstellung von Gütern und Dienstleistungen effizienter zu gestalten. Dabei gewinnt eine ganzheitliche Sichtweise unternehmerischer Entscheidung im Sinne von Technik, Ökonomie und Ökologie an Bedeutung, die eine Entkopplung von Wirtschaftswachstum und Ressourcenverbrauch bewirkt. Für betr...

Collected radiochemical and geochemical procedures

Energy Technology Data Exchange (ETDEWEB)

Kleinberg, J [comp.

1990-05-01

This revision of LA-1721, 4th Ed., Collected Radiochemical Procedures, reflects the activities of two groups in the Isotope and Nuclear Chemistry Division of the Los Alamos National Laboratory: INC-11, Nuclear and radiochemistry; and INC-7, Isotope Geochemistry. The procedures fall into five categories: I. Separation of Radionuclides from Uranium, Fission-Product Solutions, and Nuclear Debris; II. Separation of Products from Irradiated Targets; III. Preparation of Samples for Mass Spectrometric Analysis; IV. Dissolution Procedures; and V. Geochemical Procedures. With one exception, the first category of procedures is ordered by the positions of the elements in the Periodic Table, with separate parts on the Representative Elements (the A groups); the d-Transition Elements (the B groups and the Transition Triads); and the Lanthanides (Rare Earths) and Actinides (the 4f- and 5f-Transition Elements). The members of Group IIIB-- scandium, yttrium, and lanthanum--are included with the lanthanides, elements they resemble closely in chemistry and with which they occur in nature. The procedures dealing with the isolation of products from irradiated targets are arranged by target element.

Procedure automation: the effect of automated procedure execution on situation awareness and human performance

International Nuclear Information System (INIS)

Andresen, Gisle; Svengren, Haakan; Heimdal, Jan O.; Nilsen, Svein; Hulsund, John-Einar; Bisio, Rossella; Debroise, Xavier

2004-04-01

As advised by the procedure workshop convened in Halden in 2000, the Halden Project conducted an experiment on the effect of automation of Computerised Procedure Systems (CPS) on situation awareness and human performance. The expected outcome of the study was to provide input for guidance on CPS design, and to support the Halden Project's ongoing research on human reliability analysis. The experiment was performed in HAMMLAB using the HAMBO BWR simulator and the COPMA-III CPS. Eight crews of operators from Forsmark 3 and Oskarshamn 3 participated. Three research questions were investigated: 1) Does procedure automation create Out-Of-The-Loop (OOTL) performance problems? 2) Does procedure automation affect situation awareness? 3) Does procedure automation affect crew performance? The independent variable, 'procedure configuration', had four levels: paper procedures, manual CPS, automation with breaks, and full automation. The results showed that the operators experienced OOTL problems in full automation, but that situation awareness and crew performance (response time) were not affected. One possible explanation for this is that the operators monitored the automated procedure execution conscientiously, something which may have prevented the OOTL problems from having negative effects on situation awareness and crew performance. In a debriefing session, the operators clearly expressed their dislike for the full automation condition, but that automation with breaks could be suitable for some tasks. The main reason why the operators did not like the full automation was that they did not feel being in control. A qualitative analysis addressing factors contributing to response time delays revealed that OOTL problems did not seem to cause delays, but that some delays could be explained by the operators having problems with the freeze function of the CPS. Also other factors such as teamwork and operator tendencies were of importance. Several design implications were drawn

Writer`s guide for technical procedures

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-01

A primary objective of operations conducted in the US Department of Energy (DOE) complex is safety. Procedures are a critical element of maintaining a safety envelope to ensure safe facility operation. This DOE Writer`s Guide for Technical Procedures addresses the content, format, and style of technical procedures that prescribe production, operation of equipment and facilities, and maintenance activities. The DOE Writer`s Guide for Management Control Procedures and DOE Writer`s Guide for Emergency and Alarm Response Procedures are being developed to assist writers in developing nontechnical procedures. DOE is providing this guide to assist writers across the DOE complex in producing accurate, complete, and usable procedures that promote safe and efficient operations that comply with DOE orders, including DOE Order 5480.19, Conduct of Operations for DOE Facilities, and 5480.6, Safety of Department of Energy-Owned Nuclear Reactors.

An XML Representation for Crew Procedures

Science.gov (United States)

Simpson, Richard C.

2005-01-01

NASA ensures safe operation of complex systems through the use of formally-documented procedures, which encode the operational knowledge of the system as derived from system experts. Crew members use procedure documentation on the ground for training purposes and on-board space shuttle and space station to guide their activities. Investigators at JSC are developing a new representation for procedures that is content-based (as opposed to display-based). Instead of specifying how a procedure should look on the printed page, the content-based representation will identify the components of a procedure and (more importantly) how the components are related (e.g., how the activities within a procedure are sequenced; what resources need to be available for each activity). This approach will allow different sets of rules to be created for displaying procedures on a computer screen, on a hand-held personal digital assistant (PDA), verbally, or on a printed page, and will also allow intelligent reasoning processes to automatically interpret and use procedure definitions. During his NASA fellowship, Dr. Simpson examined how various industries represent procedures (also called business processes or workflows), in areas such as manufacturing, accounting, shipping, or customer service. A useful method for designing and evaluating workflow representation languages is by determining their ability to encode various workflow patterns, which depict abstract relationships between the components of a procedure removed from the context of a specific procedure or industry. Investigators have used this type of analysis to evaluate how well-suited existing workflow representation languages are for various industries based on the workflow patterns that commonly arise across industry-specific procedures. Based on this type of analysis, it is already clear that existing workflow representations capture discrete flow of control (i.e., when one activity should start and stop based on when other

Procedural learning and dyslexia.

Science.gov (United States)

Nicolson, R I; Fawcett, A J; Brookes, R L; Needle, J

2010-08-01

Three major 'neural systems', specialized for different types of information processing, are the sensory, declarative, and procedural systems. It has been proposed (Trends Neurosci., 30(4), 135-141) that dyslexia may be attributable to impaired function in the procedural system together with intact declarative function. We provide a brief overview of the increasing evidence relating to the hypothesis, noting that the framework involves two main claims: first that 'neural systems' provides a productive level of description avoiding the underspecificity of cognitive descriptions and the overspecificity of brain structural accounts; and second that a distinctive feature of procedural learning is its extended time course, covering from minutes to months. In this article, we focus on the second claim. Three studies-speeded single word reading, long-term response learning, and overnight skill consolidation-are reviewed which together provide clear evidence of difficulties in procedural learning for individuals with dyslexia, even when the tasks are outside the literacy domain. The educational implications of the results are then discussed, and in particular the potential difficulties that impaired overnight procedural consolidation would entail. It is proposed that response to intervention could be better predicted if diagnostic tests on the different forms of learning were first undertaken. 2010 John Wiley & Sons, Ltd.

Approximate Dynamic Programming in Tracking Control of a Robotic Manipulator

Directory of Open Access Journals (Sweden)

Marcin Szuster

2016-02-01

Full Text Available This article focuses on the implementation of an approximate dynamic programming algorithm in the discrete tracking control system of the three-degrees of freedom Scorbot-ER 4pc robotic manipulator. The controlled system is included in an articulated robots group which uses rotary joints to access their work space. The main part of the control system is a dual heuristic dynamic programming algorithm that consists of two structures designed in the form of neural networks: an actor and a critic. The actor generates the suboptimal control law while the critic approximates the difference of the value function from Bellman's equation with respect to the state. The residual elements of the control system are the PD controller, the supervisory term and an additional control signal. The structure of the supervisory term derives from the stability analysis performed using the Lyapunov stability theorem. The control system works online, the neural networks' weights-adaptation procedure is performed in every iteration step, and the neural networks' preliminary learning process is not required. The performance of the control system was verified by a series of computer simulations and experiments performed using the Scorbot-ER 4pc robotic manipulator.

Discrete Globalised Dual Heuristic Dynamic Programming in Control of the Two-Wheeled Mobile Robot

Directory of Open Access Journals (Sweden)

Marcin Szuster

2014-01-01

Full Text Available Network-based control systems have been emerging technologies in the control of nonlinear systems over the past few years. This paper focuses on the implementation of the approximate dynamic programming algorithm in the network-based tracking control system of the two-wheeled mobile robot, Pioneer 2-DX. The proposed discrete tracking control system consists of the globalised dual heuristic dynamic programming algorithm, the PD controller, the supervisory term, and an additional control signal. The structure of the supervisory term derives from the stability analysis realised using the Lyapunov stability theorem. The globalised dual heuristic dynamic programming algorithm consists of two structures: the actor and the critic, realised in a form of neural networks. The actor generates the suboptimal control law, while the critic evaluates the realised control strategy by approximation of value function from the Bellman’s equation. The presented discrete tracking control system works online, the neural networks’ weights adaptation process is realised in every iteration step, and the neural networks preliminary learning procedure is not required. The performance of the proposed control system was verified by a series of computer simulations and experiments realised using the wheeled mobile robot Pioneer 2-DX.

Bio-Oil Analysis Laboratory Procedures | Bioenergy | NREL

Science.gov (United States)

Bio-Oil Analysis Laboratory Procedures Bio-Oil Analysis Laboratory Procedures NREL develops laboratory analytical procedures (LAPs) for the analysis of raw and upgraded pyrolysis bio-oils. These standard procedures have been validated and allow for reliable bio-oil analysis. Procedures Determination

Surgeon-patient communication during awake procedures.

Science.gov (United States)

Smith, Claire S; Guyton, Kristina; Pariser, Joseph J; Siegler, Mark; Schindler, Nancy; Langerman, Alexander

2017-06-01

Surgeons are increasingly performing procedures on awake patients. Communication during such procedures is complex and underexplored in the literature. Surgeons were recruited from the faculty of 2 hospitals to participate in an interview regarding their approaches to communication during awake procedures. Three researchers used the constant comparative method to transcribe, code, and review interviews until saturation was reached. Twenty-three surgeons described the advantages and disadvantages of awake procedures, their communication with the awake patient, their interactions with staff and with trainees, the environment of awake procedures, and how communication in this context is taught and learned. Surgeons recognized communication during awake procedures as important and reported varied strategies for ensuring patient comfort in this context. However, they also acknowledged challenges with multiparty communication during awake procedures, especially in balancing commitments to teaching with their duty to comfort the patient. Copyright © 2016 Elsevier Inc. All rights reserved.

Robot-assisted procedures in pediatric neurosurgery.

Science.gov (United States)

De Benedictis, Alessandro; Trezza, Andrea; Carai, Andrea; Genovese, Elisabetta; Procaccini, Emidio; Messina, Raffaella; Randi, Franco; Cossu, Silvia; Esposito, Giacomo; Palma, Paolo; Amante, Paolina; Rizzi, Michele; Marras, Carlo Efisio

2017-05-01

OBJECTIVE During the last 3 decades, robotic technology has rapidly spread across several surgical fields due to the continuous evolution of its versatility, stability, dexterity, and haptic properties. Neurosurgery pioneered the development of robotics, with the aim of improving the quality of several procedures requiring a high degree of accuracy and safety. Moreover, robot-guided approaches are of special interest in pediatric patients, who often have altered anatomy and challenging relationships between the diseased and eloquent structures. Nevertheless, the use of robots has been rarely reported in children. In this work, the authors describe their experience using the ROSA device (Robotized Stereotactic Assistant) in the neurosurgical management of a pediatric population. METHODS Between 2011 and 2016, 116 children underwent ROSA-assisted procedures for a variety of diseases (epilepsy, brain tumors, intra- or extraventricular and tumor cysts, obstructive hydrocephalus, and movement and behavioral disorders). Each patient received accurate preoperative planning of optimal trajectories, intraoperative frameless registration, surgical treatment using specific instruments held by the robotic arm, and postoperative CT or MR imaging. RESULTS The authors performed 128 consecutive surgeries, including implantation of 386 electrodes for stereo-electroencephalography (36 procedures), neuroendoscopy (42 procedures), stereotactic biopsy (26 procedures), pallidotomy (12 procedures), shunt placement (6 procedures), deep brain stimulation procedures (3 procedures), and stereotactic cyst aspiration (3 procedures). For each procedure, the authors analyzed and discussed accuracy, timing, and complications. CONCLUSIONS To the best their knowledge, the authors present the largest reported series of pediatric neurosurgical cases assisted by robotic support. The ROSA system provided improved safety and feasibility of minimally invasive approaches, thus optimizing the surgical

POSSIBLE DIRECTIONS FOR AMENDMENTS OF CROATIAN COMPANY LAW

Directory of Open Access Journals (Sweden)

Tomislav Jakšić

2016-01-01

Full Text Available This contribution aims to provide directions for some possible future amendments of domestic company law regulation. Intent of such amendments is to facilitate creation of a more competitive and understandable legal framework that will be equally attractive to both domestic and foreign investors. Establishment of such legal framework can contribute to the strengthening of economy and legal certainty as well as creation of a favourable investment environment. Contribution is divided into two distinct parts. First part provides suggestions relating to amendments in the field of company incorporation. For example, consideration is given to establishment of one stop shop service as well as online incorporation, introduction of the limited liability company without the minimal share capital requirement and other similar areas which can contribute to the simplification of company incorporation procedure (e.g. abolition of the founder’s statement of tax debt non-existence. Second part provides suggestions for amendments aimed at improvement of existing legal solutions and removal of ambiguities that undermine legal certainty which can result in non-uniform application in business dealings and judicial practice. For example, suggestions are given in regard to the clearance given to the management and supervisory board members of a private company limited by shares, decision making by shareholders through use of means that do not require them to be physically present at the general meeting of a private company limited by shares, fee approval to the members of the first supervisory board of a public company limited by shares, attendance of management board members at the supervisory board meetings and making counter-proposals by company shareholders before and during the general meeting of the company.

Maintenance procedure upgrade programs

International Nuclear Information System (INIS)

Campbell, J.J.; Zimmerman, C.M.

1988-01-01

This paper describes a systematic approach to upgrading nuclear power plant maintenance procedures. The approach consists of four phases: diagnosis, program planning, program implementation, and program evaluation. Each phase is explained as a series of steps to ensure that all factors in a procedure upgrade program are considered

Coding for urologic office procedures.

Science.gov (United States)

Dowling, Robert A; Painter, Mark

2013-11-01

This article summarizes current best practices for documenting, coding, and billing common office-based urologic procedures. Topics covered include general principles, basic and advanced urologic coding, creation of medical records that support compliant coding practices, bundled codes and unbundling, global periods, modifiers for procedure codes, when to bill for evaluation and management services during the same visit, coding for supplies, and laboratory and radiology procedures pertinent to urology practice. Detailed information is included for the most common urology office procedures, and suggested resources and references are provided. This information is of value to physicians, office managers, and their coding staff. Copyright © 2013 Elsevier Inc. All rights reserved.

Radiochemical procedures

International Nuclear Information System (INIS)

Lyon, W.S.

1982-01-01

The modern counting instrumentation has largely obviated the need for separation processes in the radiochemical analysis but problems in low-level radioactivity measurement, environmental-type analyses, and special situations caused in the last years a renaissance of the need for separation techniques. Most of the radiochemical procedures, based on the classic works of the Manhattan Project chemists of the 1940's, were published in the National Nuclear Energy Series (NNES). Improvements such as new solvent extraction and ion exchange separations have been added to these methods throughout the years. Recently the Los Alamos Group have reissued their collected Radiochemical Procedures containing a short summary and review of basic inorganic chemistry - 'Chemistry of the Elements on the Basis of Electronic Configuration'. (A.L.)

How does the workload and work activities of procedural GPs compare to non-procedural GPs?

Science.gov (United States)

Russell, Deborah J; McGrail, Matthew R

2017-08-01

To investigate patterns of Australian GP procedural activity and associations with: geographical remoteness and population size hours worked in hospitals and in total; and availability for on-call DESIGN AND PARTICIPANTS: National annual panel survey (Medicine in Australia: Balancing Employment and Life) of Australian GPs, 2011-2013. Self-reported geographical work location, hours worked in different settings, and on-call availability per usual week, were analysed against GP procedural activity in anaesthetics, obstetrics, surgery or emergency medicine. Analysis of 9301 survey responses from 4638 individual GPs revealed significantly increased odds of GP procedural activity in anaesthetics, obstetrics or emergency medicine as geographical remoteness increased and community population size decreased, albeit with plateauing of the effect-size from medium-sized (population 5000-15 000) rural communities. After adjusting for confounders, procedural GPs work more hospital and more total hours each week than non-procedural GPs. In 2011 this equated to GPs practising anaesthetics, obstetrics, surgery, and emergency medicine providing 8% (95%CI 0, 16), 13% (95%CI 8, 19), 8% (95%CI 2, 15) and 18% (95%CI 13, 23) more total hours each week, respectively. The extra hours are attributable to longer hours worked in hospital settings, with no reduction in private consultation hours. Procedural GPs also carry a significantly higher burden of on-call. The longer working hours and higher on-call demands experienced by rural and remote procedural GPs demand improved solutions, such as changes to service delivery models, so that long-term procedural GP careers are increasingly attractive to current and aspiring rural GPs. © 2016 National Rural Health Alliance Inc.

The Influence of Parent Preprocedural Anxiety on Child Procedural Pain: Mediation by Child Procedural Anxiety

OpenAIRE

Bearden, Donald J.; Feinstein, Amanda; Cohen, Lindsey L.

2012-01-01

Objective Data suggest parents’ preprocedural anxiety is related to children's acute procedural anxiety and pain. This study examined the temporal relations among these constructs to determine whether children's anxiety mediates the relation between parents' anticipatory anxiety and children's procedural pain. Methods A total of 90 preschoolers receiving immunizations, their parents, and the nurses rated children's procedural anxiety and pain. Parents provided ratings of their own preprocedur...

A cross-cultural comparison of clinical supervision in South Korea and the United States.

Science.gov (United States)

Son, Eunjung; Ellis, Michael V

2013-06-01

We investigated similarities and differences in clinical supervision in two cultures: South Korea and the United States The study had two parts: (1) a test of the cross-cultural equivalence of four supervision measures; and (2) a test of two competing models of cultural differences in the relations among supervisory style, role difficulties, supervisory working alliance, and satisfaction with supervision. Participants were 191 South Korean and 187 U.S. supervisees currently engaged in clinical supervision. The U.S. measures demonstrated sufficient measurement equivalence for use in South Korea. Cultural differences moderated the relations among supervisory styles, role difficulties, supervisory working alliance, and supervision satisfaction. Specifically, the relations among these variables were significantly stronger for U.S. than for South Korean supervisees. Implications for theory, research, and practice were discussed.

KEBERHASILAN PELAYANAN STRATEGIS KONSUMEN TOKO RETAIL

Directory of Open Access Journals (Sweden)

Gatut L. Budiono

2017-04-01

Full Text Available Abstract: The research problem originates from previous research done by Yoon et al (2004:395-412. The instruments were re-research in Depok city West Java. It was measuring the effect of organizational support, supervisory support, customer participation, and job satisfaction and employee service quality. This research was to attest the hypothesis and to examine the effect of organizational support, supervisory support, customer participation in the service effort, job satisfaction and employee service quality.There was significant effect of organizational support, supervisory support, customer participation in service effort, job satisfaction. For future research, what factors are affecting to the service effort and job satisfaction, beside organization support, supervisory support, customer participation, and what factors affecting to the employee service quality, beside service effort, job satisfaction.

Safety analysis procedures for PHWR

International Nuclear Information System (INIS)

Min, Byung Joo; Kim, Hyoung Tae; Yoo, Kun Joong

2004-03-01

The methodology of safety analyses for CANDU reactors in Canada, a vendor country, uses a combination of best-estimate physical models and conservative input parameters so as to minimize the uncertainty of the plant behavior predictions. As using the conservative input parameters, the results of the safety analyses are assured the regulatory requirements such as the public dose, the integrity of fuel and fuel channel, the integrity of containment and reactor structures, etc. However, there is not the comprehensive and systematic procedures for safety analyses for CANDU reactors in Korea. In this regard, the development of the safety analyses procedures for CANDU reactors is being conducted not only to establish the safety analyses system, but also to enhance the quality assurance of the safety assessment. In the first phase of this study, the general procedures of the deterministic safety analyses are developed. The general safety procedures are covered the specification of the initial event, selection of the methodology and accident sequences, computer codes, safety analysis procedures, verification of errors and uncertainties, etc. Finally, These general procedures of the safety analyses are applied to the Large Break Loss Of Coolant Accident (LBLOCA) in Final Safety Analysis Report (FSAR) for Wolsong units 2, 3, 4

Handbook of radiologic procedures

International Nuclear Information System (INIS)

Hedgcock, M.

1986-01-01

This book is organized around radiologic procedures with each discussed from the points of view of: indications, contraindications, materials, method of procedures and complications. Covered in this book are: emergency radiology chest radiology, bone radiology, gastrointestinal radiology, GU radiology, pediatric radiology, computerized tomography, neuroradiology, visceral and peripheral angiography, cardiovascular radiology, nuclear medicine, lymphangiography, and mammography

PERSAMAAN PERLAKUAN PARA PIHAK DALAM BERACARA DI KPPU DALAM PERSPEKTIF HUKUM ACARA PERADILAN INDONESIA

Directory of Open Access Journals (Sweden)

I Made Sari

2016-07-01

Full Text Available The title of this research is: “The Equal Trearment of Parties in the Proceedings of the Business Competition Dupervisory Commission in the Perspective of Indonesia Procedural Law Courts. The Right to equal treatment also contains in the principle of hearing the opinions or arguments of other parties before the judge handed down the verdict; it must be carried out in the litigation. The unequal position of the parties in the hearing of the Business Competition Supervisory Commission will cause problems in seeking justice. What is the position of decision of the Business Competition Supervisory Commission in terms of the legal system of justice in Indonesia ?; and What is the legal protection against the reported party, when he/she is not getting the right to equality of treatment in the proceedings in the KPPU?. The research was a normative legal research that consisted of research on the systeamtics of law, the synchronization of law, legal history. Which resulted from the confict of law governing the legal status of the KPPU decision; and the void of law in the way of the litingants in the litigation procedure of KPPU. The results of this research showed that (1 The Legal position of Business Competition Supervisory Commission’s decision in the law of court procedure is that the decision of KPPU as a quasi judicial decision of which the law procedure is made on its own that is called Case Handing Procedures at the KPPU; in addition to the Law of Civil Procedure Code. (2 The from of legal protection for businesses as the reported party could be sacrificed because of the absence of clear rules regarding the from of the formulation of legal protection in the proceedings of the on the unequality of treatment of the reported party. Judul penelitian ini adalah: “Persamaan Perlakuan Para Pihak Dalam Beracara Di KPPU Dalam Perspektif Hukum Acara Peradilan Indonesia. Hak atas perlakuan yang sama  mengandung prinsip mendengarkan juga pendapat

Characteristics of Mobile Payment Procedures

OpenAIRE

Kreyer, Nina; Pousttchi, Key; Turowski, Klaus

2002-01-01

Companies are not going to invest into the development of innovative applications or services unless these can be charged for appropriately. Thus, the existence of standardized and widely accepted mobile payment procedures is crucial for successful business-to-customer mobile commerce. The acceptance of mobile payment procedures depends on costs, security and convenience issues. For the latter, it is important that a procedure can be used over the different payment scenarios mobile commerce, ...

Example of establishing the recycling of scrap metal as a waste management option within German regulations

International Nuclear Information System (INIS)

Bodenstein, Matthias; Delfs, Johannes; Karschnick, Oliver

2014-01-01

The German Atomic Energy Act (Atomgesetz, AtG) specifies the German nuclear licensing and supervising regulations. On that basis the German federal states are responsible for licensing and supervising of nuclear power plants (NPPs) located in that state. The Ministry of Energy, Agriculture, the Environment and Rural Areas (MELUR) is the authority responsible for the state Schleswig-Holstein, in which the NPPs Brokdorf, Brunsbuettel, Kruemmel and the research reactor HZG are located. In the licensing and supervisory procedures the authority may consult authorized experts. In addition to the AtG, the German Radiation Protection Ordinance (Strahlenschutzverordnung, StrlSchV) specifies regulations for clearance according to the 10 μSv-concept. The clearance of metal by recycling / melting is one option within the regulations of the StrlSchV. For a clearance an additional license given by the MELUR is necessary. In that license and the application documents as well as in the supervisory procedures very specific regulations are implemented. This includes regulations for clearance at third parties in foreign countries. In this talk a short introduction to the German regulations focussed on clearance according to the 10 μSv-concept will be given. The specific regulations in the license of clearance will be presented and also the application documents for NPPs in Schleswig-Holstein will be discussed. Furthermore it will be illustrated on what terms the MELUR decided to agree upon the recycling of scrap metal with the aim of clearance according to Radiation Protection 89 in foreign countries along with the German regulatory framework. (authors)

Replacement strategy for obsolete plant computers

International Nuclear Information System (INIS)

Schaefer, J.P.

1985-01-01

The plant computers of the first generation of larger nuclear power plants are reaching the end of their useful life time with respect to the hardware. The software would be no reason for a system exchange but new tasks for the supervisory computer system, availability questions of maintenance personnel and spare parts and the demand for improved operating procedures for the computer users have stimulated the considerations on how to exchange a computer system in a nuclear power plant without extending plant outage times due to exchange works. In the Federal Republic of Germany the planning phase of such backfitting projects is well under way, some projects are about to be implemented. The base for these backfitting projects is a modular supervisory computer concept which has been designated for the new line of KWU PWR's. The main characteristic of this computer system is the splitting of the system into a data acquisition level and a data processing level. This principle allows an extension of the processing level or even repeated replacements of the processing computers. With the existing computer system still in operation the new system can be installed in a step-by-step procedure. As soon as the first of the redundant process computers of the data processing level is in operation and the data link to the data acquisition computers is established the old computer system can be taken out of service. Then the back-up processing computer can be commissioned to complete the new system. (author)

[Knapp procedure and modified Knapp procedure with Foster suture for the treatment of double elevator palsy].

Science.gov (United States)

Li, Y P; Zhang, W; Ding, J; Ma, H Z; Zhao, K X

2017-12-11

Objective: To investigate the efficacy of Knapp procedure and modified Knapp procedure with Foster suture in the treatment of double elevator palsy(DEP). Methods: Retrospective study. Twenty-two patients with congenital DEP were underwent Knapp procedure ( n= 15) and modified Knapp procedure( n= 7). The clinical data were retrospectively analyzed, including the preoperative and postoperative vertical deviation in the primary position, ocular motility, and binocular vision. Results: The average vertical deviation in the primary position was (34.7±8.6) prism diopters(PD) before surgery and (6.5±6.5) PD after surgery ( t= 30.41, P= 0.00) in the group underwent Knapp procedure. The mean preoperative and postoperative deviations of the group underwent modified procedure were respectively (38.6±14.6) PD and (5.7±9.3)PD ( t= 15.33, P= 0.00). The mean corrected vertical deviation of the latter (32.8±5.7) PD was greater than that of the former (28.1±3.6) PD( t=- 2.39, P= 0.03). The mean improved upgaze in the modified group (2.6±0.5) was more obvious than that in the Knapp group (1.9±0.6) ( t= 2.41, P= 0.02). There is no significant difference in the surgical effect on downgaze between two groups ( U =43.00, P= 0.54). Seven patients having binocular vision with abnormal head posture (AHP) before surgery obtained binocular single vision in the primary position and reading position after operations. AHP disappeared or reduced to less than 5°. The surgical outcomes were satisfied in 72.7% patients. But the patients with ≥40 PD preoperative vertical deviation were under-corrected and needed the further operations. Conclusions: Knapp procedure and modified Knapp procedure with Foster suture were the efficient procedures for treatment of DEP without restriction of ipsilateral inferior rectus. Both procedures can obviously correct the vertical deviation and improve upgaze without remarkable limitation of downgaze, which is good to obtain the binocular single vision in

Biomass Compositional Analysis Laboratory Procedures | Bioenergy | NREL

Science.gov (United States)

Biomass Compositional Analysis Laboratory Procedures Biomass Compositional Analysis Laboratory Procedures NREL develops laboratory analytical procedures (LAPs) for standard biomass analysis. These procedures help scientists and analysts understand more about the chemical composition of raw biomass

Rechtsextremismus, Prävention und Geschlecht: Vielfalt_Macht_Pädagogik. 2. korrigierte Auflage, Juli 2014

OpenAIRE

Debus, Katharina (Ed.); Laumann, Vivien (Ed.)

2014-01-01

"(R)echte Kerle" - "Natürliche Weiblichkeit" - "Volksgemeinschaft"Diese Schlagworte machen deutlich, dass extrem rechte Ideologien und Handlungsweisen stark vergeschlechtlicht sind. Für pädagogische Präventionsarbeit ist dies von Bedeutung, da beispielsweise Hinwendung zu und Distanzierung von rechten Lebenswelten mit geschlechtsbezogenen Versprechungen und Anforderungen zu tun haben können. Ergänzend zu anderen Grundsätzen der Präventionsarbeit ist ein Bewusstsein um die Dimension Geschlecht...

Kamera-basierte Erkennung von Geschwindigkeitsbeschränkungen auf deutschen Straen

Science.gov (United States)

Nienhüser, Dennis; Ziegenmeyer, Marco; Gumpp, Thomas; Scholl, Kay-Ulrich; Zöllner, J. Marius; Dillmann, Rüdiger

An Fahrerassistenzsysteme im industriellen Einsatz werden hohe Anforderungen bezüglich Zuverlässigkeit und Robustheit gestellt. In dieser Arbeit wird die Kombination robuster Verfahren wie der Hough-Transformation und Support-Vektor-Maschinen zu einem Gesamtsystem zur Erkennung von Geschwindigkeitsbeschränkungen beschrieben. Es setzt eine Farbvideokamera als Sensorik ein. Die Evaluation auf Testdaten bestätigt durch die ermittelte hohe Korrektklassifikationsrate bei gleichzeitig geringer Zahl Fehlalarme die Zuverlässigkeit des Systems.

Praxisrelevanz der Methodenausbildung

OpenAIRE

2002-01-01

'Mit dem Band werden die Beiträge namhafter Sozialforscher aus Universitäten und Markt- und Sozialforschungsinstituten zu einer Tagung veröffentlicht, die am 6./7. Juli 2001 an der Universität Bonn abgehalten wurde. Im Mittelpunkt der Tagung stand die Frage, ob die derzeitige Ausbildung in Methoden empirischer Sozialforschung und Statistik den beruflichen Anforderungen in Universitäten sowie akademischen und privatwirtschaftlich verfassten Forschungsinstituten gerecht wird. Gestützt auf Erfah...

Einkaufen unter veränderten Vorzeichen: Ausgewählte Erfolgsfaktoren des "Konsortial-Benchmarking Einkauf 2010"

OpenAIRE

Kreysa, Jennifer

2010-01-01

Die Finanz- und Wirtschaftskrise hat für viele Unternehmen nicht nur das externe Einkaufsumfeld, sondern auch die internen Anforderungen an den Einkauf stark verändert. Für das diesjährige Konsortial-Benchmarking im Einkauf hat die Abteilung Technologiemanagement des Fraunhofer IPT gemeinsam mit einem hochkarätigen Industriekonsortium erneut die Vorgehensweisen und Ansätze besonders erfolgreicher Einkaufsabteilungen analysiert. Die Ergebnisse des Projekts geben nicht nur Aufschluss darüber, w...

Abfallentsorgung zu Lasten der Bürger? : Probleme der Kreislaufwirtschaft und Lösungsansätze für eine Entlastung der Haushalte

OpenAIRE

Kaimer, Martin; Schade, Diethard

2000-01-01

Das heutige Abfallentsorgungssystem und die ihm zugrunde liegenden gesetzlichen Regelungen haben eine lange Vorgeschichte und beruhen auf unterschiedlichen Zielsetzungen. Im Ergebnis haben die daraus folgenden Anforderungen zu teilweise fragwürdigen Entsorgungspfaden, zu einem komplizierten Nebeneinander privater und öffentlichrechtlicher Entsorger und vor allem zu höheren Müllgebühren für die Bürger geführt. Ausgehend von den Wirkungen, die mit der Umsetzung der gesetzlichen Regelungen errei...

Recycling of plastic materials collected by `Duales System Deutschland (DSD)`; Werkstoffliches Recycling von Kunststoffen aus DSD-Sammlungen

Energy Technology Data Exchange (ETDEWEB)

Baumgaertner, D. [Lech-Elektrizitaetswerke AG, Augsburg (Germany); Heinz, H. [Lech-Elektrizitaetswerke AG, Augsburg (Germany); Hiller, W. [Lech-Elektrizitaetswerke AG, Augsburg (Germany)

1996-01-01

The article deals with the importance, problems and technology of plastics recycling. It gives an overview of the specific demands of plastics recyclates, the necessary process technology, and the characteristic values of materials. (orig.) [Deutsch] Es wird die Bedeutung, die Problematik und Technik des werkstofflichen Recyclings von Kunststoffen dargestellt. Dabei sind sowohl die spezifischen Anforderungen des Einsatzstoffes als Recyclingmaterial, die notwendige Verfahrenstechnik als auch die werkstofflichen Kennwerte in einer Uebersicht dargestellt. (orig.)

Analyse kognitiver Benutzermodelle für die Evaluation von Mensch-Maschine-Systemen

OpenAIRE

Dzaack, Jeronimo

2008-01-01

Die Entwicklung und Gestaltung von Schnittstellen für Mensch-Maschine-Systeme erfordern, neben der Kenntnis der Aufgabe und der Arbeitsumgebung, auch eine Vorstellung über die kognitiven Anforderungen an zukünftige Benutzer. Ein Grund dafür liegt in der zunehmenden Informationsdichte und dem ansteigenden Automatisierungsgrad von technischen Systemen. Daraus ergibt sich die Frage, welche Art von Schnittstelle die kognitiven Prozesse bei der Interaktion am besten unterstützt und wie diese prosp...

Flexibilisierung von Geschäftsprozessen in der Praxis: Case Study "Westfleisch eG - Einführung einer Service-orientierten Architektur (SOA)"

OpenAIRE

Pohland, Sven; Hüther, Frank; Badde, Joachim

2008-01-01

Die Firma Westfleisch ist eine Unternehmensgruppe der Fleisch verarbeitenden Industrie. Mit einem Jahresumsatz von 1,67 Mrd. Euro gehört Westfleisch zu Europas führenden Schlachtunternehmen. Durch Übernahmen, verschärften Wettbewerb sowie - auch infolge von Fleischskandalen - strengere Reglementierungen steigen die Anforderungen an die Abläufe im Unternehmen. Insbesondere die Flexibilität der Geschäftsprozesse steht hier im Mittelpunkt. Exemplarisch seien Integrationsaufgaben nach M&A-Situati...

Qualifizierungsbedarfe, -ansätze und -strategien im Secondhand Sektor. Ein Europäischer Good-Practice-Bericht

OpenAIRE

Arold, Heike; Koring, Claudia; Windelband, Lars

2008-01-01

Vor dem Hintergrund eines sich ändernden Konsumverhaltens sowie des Wandels in der Umweltpolitik ist zukünftig mit einem Wachstum des Secondhand Sektors zu rechnen. Um die Qualität sowie die Professionalisierung innerhalb der im Sektor operierenden Unternehmen zu stärken, bedarf es der Entwicklung einer europaweit einheitlichen und sektorspezifischen Qualifizierung, die an den realen Arbeitsprozessen und Anforderungen ausgerichtet ist. Der vorliegende Good-Practice-Bericht zeigt neben einer a...

Maschinenelemente

Science.gov (United States)

Böge, Alfred; Böge, Wolfgang; Borutzki, Ulrich; Labisch, Susanna; Linke, Petra; Weidermann, Frank

Der konstruktive Entwicklungsprozess eines Produkts kann nicht losgelöst von den einzelnen Phasen betrachtet werden, die es während seines Bestehens durchläuft. Jede Phase beeinflusst mehr oder weniger die Ziele der Produktentwicklung. Diese Wechselwirkungen müssen Entwickler und Konstrukteur berücksichtigen. Zum Teil spiegeln sich diese Verbindungen in Anforderungen und Gestaltungshinweisen wider (siehe Kapitel 1.4). Im Folgenden wird der Produktlebenszyklus mit seinen einzelnen Phasen näher vorgestellt.

Rechnungsgrundlagen und Prämien in der Personen- und Schadenversicherung – Aktuelle Ansätze, Möglichkeiten und Grenzen. Proceedings zum 3. FaRis & DAV Symposium am 7. Dezember 2012 in Köln

OpenAIRE

Strobel, Jürgen; Nießen, Gero; Herrmann, Richard; Pasdika, Ulrich

2013-01-01

Die Prämienbestimmung ist nicht nur vor dem Hintergrund von Unisex ein über viele Versicherungssparten aktuell diskutiertes Thema. Häufige Veränderungen des Rechtsrahmens, die stete Entwicklung neuer Produkte, Weiterentwicklungen der Methoden und geänderte Anforderungen des Marktes beeinflussen die Wahl der Rechnungsgrundlagen als Basis der Prämienkalkulation. Einigen ausgewählten Fragestellungen aus diesem Umfeld ist das 3. FaRis & DAV-Symposium nachge-gangen. Dazu wurden Sterblichkeit und L...

Virtuelle Auskunft mit Mehrwert : Chatbots in Bibliotheken

OpenAIRE

Christensen, Anne

2008-01-01

Die virtuelle Auskunft mit Hilfe elektronischer Informationsassistenten, auch Chatbots oder Chatterbots genannt, ist ein seit dem Jahr 2004 zu beobachtender Trend im deutschen Bibliothekswesen. Die Arbeit stellt die vier Chatbots ASKademicus, Stella, INA und das Sachsen-I vor. Am Beispiel von Stella aus der SUB Hamburg werden dann die Funktionsweise von Chatbots sowie die Anforderungen an die Konzeption dieser virtuellen Berater erläutert. Den Schwerpunkt der Arbeit bilden der Vergleich von C...

Procedures For Microbial-Ecology Laboratory

Science.gov (United States)

Huff, Timothy L.

1993-01-01

Microbial Ecology Laboratory Procedures Manual provides concise and well-defined instructions on routine technical procedures to be followed in microbiological laboratory to ensure safety, analytical control, and validity of results.

Nuclear installations in Belarus: Implications of political and technical issues

International Nuclear Information System (INIS)

Zaitsev, S.I.

2001-01-01

The report deals with some aspects of past and present supervisory activities at nuclear installations in Belarus. It briefly describes an existing supervisory system for nuclear installations in the Republic of Belarus, its legislative basis and functions of the supervisory body. Consideration is given to further development and improvement of the supervision in such fields as revision and elaboration of normative documents on nuclear safety, training of inspectors, co-operation with other governmental bodies while examining the nuclear option in the Republic of Belarus. (author)

TMACS Test Procedure TP002: Trending

International Nuclear Information System (INIS)

Scanlan, P.K.

1994-01-01

The TMACS Software Project Test Procedures translate the project's acceptance criteria into test steps. Software releases are certified when the affected Test Procedures are successfully performed and the customers authorize installation of these changes. This Test Procedure tests the TMACS Trending functions

Summative Mass Analysis of Algal Biomass - Integration of Analytical Procedures: Laboratory Analytical Procedure (LAP)

Energy Technology Data Exchange (ETDEWEB)

Laurens, Lieve M. L.

2016-01-13

This procedure guides the integration of laboratory analytical procedures to measure algal biomass constituents in an unambiguous manner and ultimately achieve mass balance closure for algal biomass samples. Many of these methods build on years of research in algal biomass analysis.

Relations among conceptual knowledge, procedural knowledge, and procedural flexibility in two samples differing in prior knowledge.

Science.gov (United States)

Schneider, Michael; Rittle-Johnson, Bethany; Star, Jon R

2011-11-01

Competence in many domains rests on children developing conceptual and procedural knowledge, as well as procedural flexibility. However, research on the developmental relations between these different types of knowledge has yielded unclear results, in part because little attention has been paid to the validity of the measures or to the effects of prior knowledge on the relations. To overcome these problems, we modeled the three constructs in the domain of equation solving as latent factors and tested (a) whether the predictive relations between conceptual and procedural knowledge were bidirectional, (b) whether these interrelations were moderated by prior knowledge, and (c) how both constructs contributed to procedural flexibility. We analyzed data from 2 measurement points each from two samples (Ns = 228 and 304) of middle school students who differed in prior knowledge. Conceptual and procedural knowledge had stable bidirectional relations that were not moderated by prior knowledge. Both kinds of knowledge contributed independently to procedural flexibility. The results demonstrate how changes in complex knowledge structures contribute to competence development.

Program Baseline Change Control Procedure

International Nuclear Information System (INIS)

1993-02-01

This procedure establishes the responsibilities and process for approving initial issues of and changes to the technical, cost, and schedule baselines, and selected management documents developed by the Office of Civilian Radioactive Waste Management (OCRWM) for the Civilian Radioactive Waste Management System. This procedure implements the OCRWM Baseline Management Plan and DOE Order 4700.1, Chg 1. It streamlines the change control process to enhance integration, accountability, and traceability of Level 0 and Level I decisions through standardized Baseline Change Proposal (BCP) forms to be used by the Level 0, 1, 2, and 3 Baseline Change Control Boards (BCCBs) and to be tracked in the OCRWM-wide Configuration Information System (CIS) Database.This procedure applies to all technical, cost, and schedule baselines controlled by the Energy System Acquisition Advisory Board (ESAAB) BCCB (Level 0) and, OCRWM Program Baseline Control Board (PBCCB) (Level 1). All baseline BCPs initiated by Level 2 or lower BCCBs, which require approval from ESAAB or PBCCB, shall be processed in accordance with this procedure. This procedure also applies to all Program-level management documents controlled by the OCRWM PBCCB

Designing Flightdeck Procedures: Literature Resources

Science.gov (United States)

Feldman, Jolene; Barshi, Immanuel; Degani, Asaf; Loukopoulou, Loukia; Mauro, Robert

2017-01-01

This technical publication contains the titles, abstracts, summaries, descriptions, and/or annotations of available literature sources on procedure design and development, requirements, and guidance. It is designed to provide users with an easy access to available resources on the topic of procedure design, and with a sense of the contents of these sources. This repository of information is organized into the following publication sources: Research (e.g., journal articles, conference proceedings), Manufacturers' (e.g., operation manuals, newsletters), and Regulatory and/or Government (e.g., advisory circulars, reports). An additional section contains synopses of Accident/Incident Reports involving procedures. This work directly supports a comprehensive memorandum by Barshi, Mauro, Degani, & Loukopoulou (2016) that summarizes the results of a multi-year project, partially funded by the FAA, to develop technical reference materials that support guidance on the process of developing cockpit procedures (see "Designing Flightdeck Procedures" https://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/20160013263.pdf). An extensive treatment of this topic is presented in a forthcoming book by the same authors.

21 CFR 211.150 - Distribution procedures.

Science.gov (United States)

2010-04-01

...: GENERAL CURRENT GOOD MANUFACTURING PRACTICE FOR FINISHED PHARMACEUTICALS Holding and Distribution § 211.150 Distribution procedures. Written procedures shall be established, and followed, describing the... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Distribution procedures. 211.150 Section 211.150...

5 CFR 412.102 - Purpose.

Science.gov (United States)

2010-01-01

... Administrative Personnel OFFICE OF PERSONNEL MANAGEMENT CIVIL SERVICE REGULATIONS SUPERVISORY, MANAGEMENT, AND... continuing development of SES members. (b) This part identifies a continuum of leadership development, starting with supervisory positions and proceeding through management and executive positions...

Pre-procedural antibiotics for endoscopic urological procedures: Initial experience in individuals with spinal cord injury and asymptomatic bacteriuria.

Science.gov (United States)

Chong, Julio T; Klausner, Adam P; Petrossian, Albert; Byrne, Michael D; Moore, Jewel R; Goetz, Lance L; Gater, David R; Grob, B Mayer

2015-03-01

The objective of this study was to compare the safety, efficacy, quality-of-life impact, and costs of a single dose or a longer course of pre-procedural antibiotics prior to elective endoscopic urological procedures in individuals with spinal cord injury and disorders (SCI/D) and asymptomatic bacteriuria. A prospective observational study. Hunter Holmes McGuire Veterans Affairs Medical Center, Richmond, Virginia, USA. Sixty persons with SCI/D and asymptomatic bacteriuria scheduled to undergo elective endoscopic urological procedures. A single pre-procedural dose of antibiotics vs. a 3-5-day course of pre-procedural antibiotics. Objective and subjective measures of health, costs, and quality of life. There were no significant differences in vital signs, leukocytosis, adverse events, and overall satisfaction in individuals who received short-course vs. long-course antibiotics. There was a significant decrease in antibiotic cost (33.1 ± 47.6 vs. 3.6 ± 6.1 US$, P = 0.01) for individuals in the short-course group. In addition, there was greater pre-procedural anxiety (18 vs. 0%, P antibiotics. SCI/D individuals with asymptomatic bacteriuria may be able to safely undergo most endoscopic urological procedures with a single dose of pre-procedural antibiotics. However, further research is required and even appropriate pre-procedural antibiotics may not prevent severe infections.

Automatic segmentation of rotational x-ray images for anatomic intra-procedural surface generation in atrial fibrillation ablation procedures.

Science.gov (United States)

Manzke, Robert; Meyer, Carsten; Ecabert, Olivier; Peters, Jochen; Noordhoek, Niels J; Thiagalingam, Aravinda; Reddy, Vivek Y; Chan, Raymond C; Weese, Jürgen

2010-02-01

Since the introduction of 3-D rotational X-ray imaging, protocols for 3-D rotational coronary artery imaging have become widely available in routine clinical practice. Intra-procedural cardiac imaging in a computed tomography (CT)-like fashion has been particularly compelling due to the reduction of clinical overhead and ability to characterize anatomy at the time of intervention. We previously introduced a clinically feasible approach for imaging the left atrium and pulmonary veins (LAPVs) with short contrast bolus injections and scan times of approximately 4 -10 s. The resulting data have sufficient image quality for intra-procedural use during electro-anatomic mapping (EAM) and interventional guidance in atrial fibrillation (AF) ablation procedures. In this paper, we present a novel technique to intra-procedural surface generation which integrates fully-automated segmentation of the LAPVs for guidance in AF ablation interventions. Contrast-enhanced rotational X-ray angiography (3-D RA) acquisitions in combination with filtered-back-projection-based reconstruction allows for volumetric interrogation of LAPV anatomy in near-real-time. An automatic model-based segmentation algorithm allows for fast and accurate LAPV mesh generation despite the challenges posed by image quality; relative to pre-procedural cardiac CT/MR, 3-D RA images suffer from more artifacts and reduced signal-to-noise. We validate our integrated method by comparing 1) automatic and manual segmentations of intra-procedural 3-D RA data, 2) automatic segmentations of intra-procedural 3-D RA and pre-procedural CT/MR data, and 3) intra-procedural EAM point cloud data with automatic segmentations of 3-D RA and CT/MR data. Our validation results for automatically segmented intra-procedural 3-D RA data show average segmentation errors of 1) approximately 1.3 mm compared with manual 3-D RA segmentations 2) approximately 2.3 mm compared with automatic segmentation of pre-procedural CT/MR data and 3

Analytical procedures. Pt. 1

International Nuclear Information System (INIS)

Weber, G.

1985-01-01

In analytical procedures (Boole procedures) there is certain to be a close relationship between the safety assessment and reliability assessment of technical facilities. The paper gives an overview of the organization of models, fault trees, the probabilistic evaluation of systems, evaluation with minimum steps or minimum paths regarding statistically dependent components and of systems liable to suffer different kinds of outages. (orig.) [de

46 CFR 154.665 - Welding procedures.

Science.gov (United States)

2010-10-01

... 46 Shipping 5 2010-10-01 2010-10-01 false Welding procedures. 154.665 Section 154.665 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN BULK DANGEROUS CARGOES SAFETY STANDARDS... Construction § 154.665 Welding procedures. Welding procedure tests for cargo tanks for a design temperature...

49 CFR 192.225 - Welding procedures.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Welding procedures. 192.225 Section 192.225... BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS Welding of Steel in Pipelines § 192.225 Welding procedures. (a) Welding must be performed by a qualified welder in accordance with welding procedures...

40 CFR 1065.10 - Other procedures.

Science.gov (United States)

2010-07-01

... importance of pursuing changes to the procedures: (i) Whether supplemental emission standards or other... procedures, such as those of the California Air Resources Board or the International Organization for... 40 Protection of Environment 32 2010-07-01 2010-07-01 false Other procedures. 1065.10 Section 1065...

40 CFR 205.54 - Test procedures.

Science.gov (United States)

2010-07-01

... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Test procedures. 205.54 Section 205.54 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) NOISE ABATEMENT PROGRAMS TRANSPORTATION EQUIPMENT NOISE EMISSION CONTROLS Medium and Heavy Trucks § 205.54 Test procedures. The procedures described...

The revised version of the German Radiation Protection Regulatory Guide for Medical Applications (Richtlinie Strahlenschutz in der Medizin)

International Nuclear Information System (INIS)

Kemmer, W.

1995-01-01

The revised version of the regulatory guide, effective since 1 June 1993, is intended to enhance and effect in practice a harmonisation of approval and acceptance procedures and standardized testing processes for acceptance and approval, as well as to facilitate governmental supervisory functions relating to the application of radioactive substances and ionizing radiation in the medical field. The guide can furthermore serve as a useful source of reference and information for doctors or medical personnel being trained in applying the Radiation Protection Ordinance, or for acquisition of the required expert knowledge in medical radiological protection. (orig./HP) [de

Automatic control of a negative ion source

International Nuclear Information System (INIS)

Saadatmand, K.; Sredniawski, J.; Solensten, L.

1989-01-01

A CAMAC based control architecture is devised for a Berkeley-type H - volume ion source. The architecture employs three 80386 PCs. One PC is dedicated to control and monitoring of source operation. The other PC functions with digitizers to provide data acquisition of waveforms. The third PC is used for off-line analysis. Initially, operation of the source was put under remote computer control (supervisory). This was followed by development of an automated startup procedure. Finally, a study of the physics of operation is now underway to establish a data base from which automatic beam optimization can be derived. (orig.)

Automatic control of a negative ion source

Science.gov (United States)

Saadatmand, K.; Sredniawski, J.; Solensten, L.

1989-04-01

A CAMAC based control architecture is devised for a Berkeley-type H - volume ion source [1]. The architecture employs three 80386 TM PCs. One PC is dedicated to control and monitoring of source operation. The other PC functions with digitizers to provide data acquisition of waveforms. The third PC is used for off-line analysis. Initially, operation of the source was put under remote computer control (supervisory). This was followed by development of an automated startup procedure. Finally, a study of the physics of operation is now underway to establish a data base from which automatic beam optimization can be derived.

Automatic control of a negative ion source

Energy Technology Data Exchange (ETDEWEB)

Saadatmand, K.; Sredniawski, J.; Solensten, L. (Grumman Corp., Long Island, NY (USA))

1989-04-01

A CAMAC based control architecture is devised for a Berkeley-type H/sup -/ volume ion source. The architecture employs three 80386 PCs. One PC is dedicated to control and monitoring of source operation. The other PC functions with digitizers to provide data acquisition of waveforms. The third PC is used for off-line analysis. Initially, operation of the source was put under remote computer control (supervisory). This was followed by development of an automated startup procedure. Finally, a study of the physics of operation is now underway to establish a data base from which automatic beam optimization can be derived. (orig.).

Procedures minimally invasive image-guided

International Nuclear Information System (INIS)

Mora Guevara, Alejandro

2011-01-01

A literature review focused on minimally invasive procedures, has been performed at the Department of Radiology at the Hospital Calderon Guardia. A multidisciplinary team has been raised for decision making. The materials, possible complications and the available imaging technique such as ultrasound, computed tomography, magnetic resonance imaging, have been determined according to the procedure to be performed. The revision has supported medical interventions didactically enjoying the best materials, resources and conditions for a successful implementation of procedures and results [es

Preschooler test or procedure preparation

Science.gov (United States)

... your child during and after the procedure with books, songs, counting, deep breathing, or blowing bubbles. PLAY ... can be present during the procedure. Ask if anesthesia can be used to reduce your child's discomfort. ...

Toddler test or procedure preparation

Science.gov (United States)

... a test or procedure: Explain the procedure in language your child understands, using plain words. Avoid abstract terms. Make sure your child understands the exact body part involved in the test, and that the ...

Fusion Imaging for Procedural Guidance.

Science.gov (United States)

Wiley, Brandon M; Eleid, Mackram F; Thaden, Jeremy J

2018-05-01

The field of percutaneous structural heart interventions has grown tremendously in recent years. This growth has fueled the development of new imaging protocols and technologies in parallel to help facilitate these minimally-invasive procedures. Fusion imaging is an exciting new technology that combines the strength of 2 imaging modalities and has the potential to improve procedural planning and the safety of many commonly performed transcatheter procedures. In this review we discuss the basic concepts of fusion imaging along with the relative strengths and weaknesses of static vs dynamic fusion imaging modalities. This review will focus primarily on echocardiographic-fluoroscopic fusion imaging and its application in commonly performed transcatheter structural heart procedures. Copyright © 2017 Sociedad Española de Cardiología. Published by Elsevier España, S.L.U. All rights reserved.

Considerable variability of procedural sedation and analgesia practices for gastrointestinal endoscopic procedures in Europe

NARCIS (Netherlands)

Vaessen, Hermanus H B; Knape, Johannes T A

2016-01-01

Background/Aims: The use of moderate to deep sedation for gastrointestinal endoscopic procedures has increased in Europe considerably. Because this level of sedation is a risky medical procedure, a number of international guidelines have been developed. This survey aims to review if, and if so

40 CFR 791.30 - Hearing procedures.

Science.gov (United States)

2010-07-01

... officer may deem necessary to an understanding and determination of the dispute. The hearing officer shall... 40 Protection of Environment 31 2010-07-01 2010-07-01 true Hearing procedures. 791.30 Section 791... (CONTINUED) DATA REIMBURSEMENT Hearing Procedures § 791.30 Hearing procedures. (a) Representation by counsel...

28 CFR 79.73 - Appeals procedures.

Science.gov (United States)

2010-07-01

... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Appeals procedures. 79.73 Section 79.73 Judicial Administration DEPARTMENT OF JUSTICE (CONTINUED) CLAIMS UNDER THE RADIATION EXPOSURE COMPENSATION ACT Procedures § 79.73 Appeals procedures. (a) An appeal must be in writing and must be received by...

Automation of the testing procedure

International Nuclear Information System (INIS)

Haas, H.; Fleischer, M.; Bachner, E.

1979-01-01

For the judgement of technologies applied and the testing of specific components of the HTR primary circuit, complex test procedures and data evaluations are required. Extensive automation of these test procedures is indispensable. (orig.) [de

The nuclear licensing procedure

International Nuclear Information System (INIS)

Wagner, H.

1976-01-01

To begin with, the present nuclear licensing procedure is illustrated by a diagram. The relationship between the state and the Laender, the various experts (GRS - IRS + LRA -, TUEV, DWD, university institutes, firms of consulting engineers, etc), participation of the public, e.g. publication of the relevant documents, questions, objections (made by individuals or by groups such as citizens' initiatives), public discussion, official notice, appeals against the decision, the right of immediate execution of the decision are shortly dealt with. Finally, ways to improve the licensing procedure are discussed, from the evaluation of the documents to be submitted, published, and examined by the authorities (and their experts) up to an improvement of the administrative procedure. An improved licensing procedure should satisfy the well-founded claims of the public for more transparency as well as the equally justifiable claims of industry and utilities in order to ensure that the citizens' legal right to have safe and adequate electric power is guaranteed. The updated energy programme established by the Federal Government is mentioned along with the effectiveness of dealing with nuclear problems on the various levels of a Land government. (orig.) [de

Revised Unfilling Procedure for Solid Lithium Lenses

International Nuclear Information System (INIS)

Leveling, A.

2003-01-01

A procedure for unfilling used lithium lenses to has been described in Pbar Note 664. To date, the procedure has been used to disassemble lenses 20, 21, 17, 18, and 16. As a result of this work, some parts of the original procedure were found to be time consuming and ineffective. Modifications to the original procedure have been made to streamline the process and are discussed in this note. The revised procedure is included in this note.

Computer-Based Procedures for Field Workers in Nuclear Power Plants: Development of a Model of Procedure Usage and Identification of Requirements

Energy Technology Data Exchange (ETDEWEB)

Katya Le Blanc; Johanna Oxstrand

2012-04-01

The nuclear industry is constantly trying to find ways to decrease the human error rate, especially the human errors associated with procedure use. As a step toward the goal of improving procedure use performance, researchers, together with the nuclear industry, have been looking at replacing the current paper-based procedures with computer-based procedure systems. The concept of computer-based procedures is not new by any means; however most research has focused on procedures used in the main control room. Procedures reviewed in these efforts are mainly emergency operating procedures and normal operating procedures. Based on lessons learned for these previous efforts we are now exploring a more unknown application for computer based procedures - field procedures, i.e. procedures used by nuclear equipment operators and maintenance technicians. The Idaho National Laboratory and participants from the U.S. commercial nuclear industry are collaborating in an applied research effort with the objective of developing requirements and specifications for a computer-based procedure system to be used by field workers. The goal is to identify the types of human errors that can be mitigated by using computer-based procedures and how to best design the computer-based procedures to do so. This paper describes the development of a Model of Procedure Use and the qualitative study on which the model is based. The study was conducted in collaboration with four nuclear utilities and five research institutes. During the qualitative study and the model development requirements and for computer-based procedures were identified.

WSSDA's Guide to Parliamentary Procedures. Revised

Science.gov (United States)

Randolph, Mary

2004-01-01

This guide to parliamentary procedures is presented by the Washington State School Directors' Association (WSSDA) for use by local school boards within the State of Washington. Parliamentary law and parliamentary procedure is the key to order and to provide justice and fairness to all. Through both formal and informal parliamentary procedures,…

39 CFR 5.2 - Committee procedure.

Science.gov (United States)

2010-07-01

... 39 Postal Service 1 2010-07-01 2010-07-01 false Committee procedure. 5.2 Section 5.2 Postal Service UNITED STATES POSTAL SERVICE THE BOARD OF GOVERNORS OF THE U.S. POSTAL SERVICE COMMITTEES (ARTICLE V) § 5.2 Committee procedure. Each committee establishes its own rules of procedure, consistent with...

Intake Procedures in College Counseling Centers.

Science.gov (United States)

Pappas, James P.; And Others

Intake procedures is the common subject of four papers presented in this booklet. James P. Pappas discusses trends, a decision theory model, information and issues in his article "Intake Procedures in Counseling Centers--Trends and Theory." In the second article "The Utilization of Standardized Tests in Intake Procedures or 'Where's the Post…

49 CFR 195.214 - Welding procedures.

Science.gov (United States)

2010-10-01

... 49 Transportation 3 2010-10-01 2010-10-01 false Welding procedures. 195.214 Section 195.214... PIPELINE Construction § 195.214 Welding procedures. (a) Welding must be performed by a qualified welder in accordance with welding procedures qualified under Section 5 of API 1104 or Section IX of the ASME Boiler and...

Deterministic effects of interventional radiology procedures

International Nuclear Information System (INIS)

Shope, Thomas B.

1997-01-01

The purpose of this paper is to describe deterministic radiation injuries reported to the Food and Drug Administration (FDA) that resulted from therapeutic, interventional procedures performed under fluoroscopic guidance, and to investigate the procedure or equipment-related factors that may have contributed to the injury. Reports submitted to the FDA under both mandatory and voluntary reporting requirements which described radiation-induced skin injuries from fluoroscopy were investigated. Serious skin injuries, including moist desquamation and tissues necrosis, have occurred since 1992. These injuries have resulted from a variety of interventional procedures which have required extended periods of fluoroscopy compared to typical diagnostic procedures. Facilities conducting therapeutic interventional procedures need to be aware of the potential for patient radiation injury and take appropriate steps to limit the potential for injury. (author)

Complex intravenous anesthesia in interventional procedures

International Nuclear Information System (INIS)

Xie Zonggui; Hu Yuanming; Huang Yunlong; You Yong; Wu Juan; Huang Zengping; Li Jian

2006-01-01

Objective: To evaluate the value and safety of Diprivan and Fentany intravenous administration of analgesia in interventional procedures. Methods: Diprivan with Fentany intravenous administration for analgesia was used in eighty interventional procedures of sixty-five patients, without tracheal tube insertion. Vital signs including HR, BP, arterial oxygen saturation (SpO 2 ) and patients' reaction to operating were recorded. Results: Intravenous anesthesia was cared out successfully in eighty interventional procedures, with patients under sleeping condition during the operation, together with no pain and no agony memory of the procedure. The amount of Diprivan was 500±100 mg and Fentany was 0.2±0.025 mg. Mean arterial pressure and SpO 2 were 11.4±2.2 kPa, 10.6±2.1 kPa and 98±1.0, 96±1.5 respectively before and after ten minutes of the operation, with no significant difference. Conclusions: Diprivan with Fentany intravenous administration for interventional procedure analgesia possess good safety, painless and no agony memory of the procedure; therefor ought to be recommended. (authors)