WorldWideScience

Sample records for superior technology electronic

  1. Technology Maturity is Technology Superiority

    Science.gov (United States)

    2008-09-09

    Dominant Air Power: Design For Tomorrow…Deliver Today 2 TECHNOLOGY MATURITY CONFERENCE • ONE DEFINITION OF MATURITY – GOOD JUDGEMENT COMES FROM...EXPERIENCE—EXPERIENCE COMES FROM BAD JUDGEMENT Dominant Air Power: Design For Tomorrow…Deliver Today 3 TECHNOLOGY MATURITY CONFERENCE • THIS WILL BE A...2008 TECHNOLOGY MATURITY CONFERENCE “ TECHNOLOGY MATURITY IS TECHNOLOGY SUPERIORITY” Aeronautical Systems Center Dr. Tom Christian ASC/EN, WPAFB OH

  2. Manufacturing Innovation and Technological Superiority

    Science.gov (United States)

    2016-09-01

    Defense AT&L: September-October 2016 2 From the Under Secretary of Defense for Acquisit ion, Technology, and Logist ics Manufacturing Innovation ...English advantages in mechanized textile manufacturing in the early 1800s drove the performance of the British economy, just as Carnegie’s steel...program to establish Manufacturing Innovation Institutes (MIIs) that would create incubators for advanced manufacturing technology in key

  3. Electron tunnel sensor technology

    Science.gov (United States)

    Waltman, S. B.; Kaiser, W. J.

    1989-01-01

    The recent development of Scanning Tunneling Microscopy technology allows the application of electron tunneling to position detectors for the first time. The vacuum tunnel junction is one of the most sensitive position detection mechanisms available. It is also compact, simple, and requires little power. A prototype accelerometer based on electron tunneling, and other sensor applications of this promising new technology are described.

  4. Study on evaluation system of high & new technology superior enterprises

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    With the globalization of economy and science & technology, high & new technology enterprises have become the point of Chinese economic growth and the important basis for constructing innovative country. By analyzing the characteristics of high & new technology superior enterprises and the influential factors, the evaluation index and method based on Grey Relation Analysis are designed. Some high & new technology enterprises in Heilongjiang province are evaluated and application tactics of evaluation system are proposed. This study provides scientific method and basis for government to obtain development state about high & new technology enterprises and design planning and policies of high & new technology industry.

  5. Electronic equipment packaging technology

    CERN Document Server

    Ginsberg, Gerald L

    1992-01-01

    The last twenty years have seen major advances in the electronics industry. Perhaps the most significant aspect of these advances has been the significant role that electronic equipment plays in almost all product markets. Even though electronic equipment is used in a broad base of applications, many future applications have yet to be conceived. This versatility of electron­ ics has been brought about primarily by the significant advances that have been made in integrated circuit technology. The electronic product user is rarely aware of the integrated circuits within the equipment. However, the user is often very aware of the size, weight, mod­ ularity, maintainability, aesthetics, and human interface features of the product. In fact, these are aspects of the products that often are instrumental in deter­ mining its success or failure in the marketplace. Optimizing these and other product features is the primary role of Electronic Equipment Packaging Technology. As the electronics industry continues to pr...

  6. Electron Technology: ELTE 2016

    Science.gov (United States)

    Pisarkiewicz, Tadeusz; Kucewicz, Wojciech

    2016-12-01

    In this paper we present a review of research results and technical accomplishments presented by researchers from technical universities, governmental institutes and research companies during the XIIth Scientific Conference Electron Technology, ELTE 2016. This review is based on materials presented at four topical conference sessions: Microelectronics and Nanoelectronics, Photonics, Materials and Technologies, and Microsystems and also on materials presented by invited speakers at two dedicated sessions. Oral sessions were accompanied by the poster sessions. In effect about 50 papers gathered in this volume reflect the topics discussed at the Conference. A short description of technological and measurement possibilities in the laboratories of Academic Centre for Materials and Nanotechnology and also in the Department of Electronics of the Faculty of Computer Science, Electronics and Telecommunications AGH UST are given.

  7. Mathematics for electronic technology

    CERN Document Server

    Howson, D P

    1975-01-01

    Mathematics for Electronic Technology is a nine-chapter book that begins with the elucidation of the introductory concepts related to use of mathematics in electronic engineering, including differentiation, integration, partial differentiation, infinite series, vectors, vector algebra, and surface, volume and line integrals. Subsequent chapters explore the determinants, differential equations, matrix analysis, complex variable, topography, graph theory, and numerical analysis used in this field. The use of Fourier method for harmonic analysis and the Laplace transform is also described. The ma

  8. Electronic components and technology

    CERN Document Server

    Sangwine, Stephen

    2007-01-01

    Most introductory textbooks in electronics focus on the theory while leaving the practical aspects to be covered in laboratory courses. However, the sooner such matters are introduced, the better able students will be to include such important concerns as parasitic effects and reliability at the very earliest stages of design. This philosophy has kept Electronic Components and Technology thriving for two decades, and this completely updated third edition continues the approach with a more international outlook.Not only does this textbook introduce the properties, behavior, fabrication, and use

  9. Technology of Electronic Signatur

    OpenAIRE

    2004-01-01

    An electronic signature uses a hash of message and an asymetrical algorithm of encryption for its generation. During verification of message on receiver side the hash of original message must be identical with the hash of received message. Electronic message is secured autentization of author and integrity of transmission date. By electronic signature it is possible to sign everything what is in digital form.

  10. Technology of Electronic Signatur

    Directory of Open Access Journals (Sweden)

    Jaroslav Sadovsky

    2004-01-01

    Full Text Available An electronic signature uses a hash of message and an asymetrical algorithm of encryption for its generation. During verification of message on receiver side the hash of original message must be identical with the hash of received message. Electronic message is secured autentization of author and integrity of transmission date. By electronic signature it is possible to sign everything what is in digital form.

  11. Social and organizational impacts of the electronic processing system of the brazilian superior tribunal of justice

    Directory of Open Access Journals (Sweden)

    Christiana Soares de Freitas

    2015-10-01

    Full Text Available This paper presents a study on the social and organizational impacts of the Electronic Processing System (EPS implemented in 2008 by the Brazilian Superior Tribunal of Justice (STJ. This system is part of a wider transformation process involving the implementation of a new management model at the STJ. The theoretical framework is based on the Technology Enactment Theory and other studies on the role of technological innovations in public organizations (Fountain, 2005; Freitas, 2012. The main goal of the research is to identify the most significant factors facilitating or inhibiting the innovation adoption. Results show different impacts of the EPS on professional groups and organizations. Political, cultural and economic aspects influence stakeholders’ perceptions of the innovation, including its sustainability, time and costs savings that impact the rate of adoption and the realization of benefits both to users and the organization investing in its development.

  12. Advanced Electronic Technology.

    Science.gov (United States)

    1980-05-15

    Silicon De- D.,I. Silversmith Solid State Technol. 23, 88 vices Formed by Ion Iniplanta- 1. W. Mountain (1980) tion and Laser Annealing S.C. Munroe M...J. Silversmith Photodeposition R. M. Osgood, Jr. 5075 Picosecond Optical Sampling H. A. Haus* Accepted by IEEE J. Quantum S.T. Kirsch Electron. K

  13. Benchmarking foreign electronics technologies

    Energy Technology Data Exchange (ETDEWEB)

    Bostian, C.W.; Hodges, D.A.; Leachman, R.C.; Sheridan, T.B.; Tsang, W.T.; White, R.M.

    1994-12-01

    This report has been drafted in response to a request from the Japanese Technology Evaluation Center`s (JTEC) Panel on Benchmarking Select Technologies. Since April 1991, the Competitive Semiconductor Manufacturing (CSM) Program at the University of California at Berkeley has been engaged in a detailed study of quality, productivity, and competitiveness in semiconductor manufacturing worldwide. The program is a joint activity of the College of Engineering, the Haas School of Business, and the Berkeley Roundtable on the International Economy, under sponsorship of the Alfred P. Sloan Foundation, and with the cooperation of semiconductor producers from Asia, Europe and the United States. Professors David A. Hodges and Robert C. Leachman are the project`s Co-Directors. The present report for JTEC is primarily based on data and analysis drawn from that continuing program. The CSM program is being conducted by faculty, graduate students and research staff from UC Berkeley`s Schools of Engineering and Business, and Department of Economics. Many of the participating firms are represented on the program`s Industry Advisory Board. The Board played an important role in defining the research agenda. A pilot study was conducted in 1991 with the cooperation of three semiconductor plants. The research plan and survey documents were thereby refined. The main phase of the CSM benchmarking study began in mid-1992 and will continue at least through 1997. reports are presented on the manufacture of integrated circuits; data storage; wireless technology; human-machine interfaces; and optoelectronics. Selected papers are indexed separately for inclusion in the Energy Science and Technology Database.

  14. The Next Technology Revolution - Nano Electronic Technology

    Science.gov (United States)

    Turlik, Iwona

    2004-03-01

    Nanotechnology is a revolutionary engine that will engender enormous changes in a vast majority of today's industries and markets, while potentially creating whole new industries. The impact of nanotechnology is particularly significant in the electronics industry, which is constantly driven by the need for higher performance, increased functionality, smaller size and lower cost. Nanotechnology can influence many of the hundreds of components that are typically assembled to manufacture modern electronic devices. Motorola manufactures electronics for a wide range of industries and communication products. In this presentation, the typical components of a cellular phone are outlined and technology requirements for future products, the customer benefits, and the potential impact of nanotechnology on many of the components are discussed. Technology needs include reliable materials supply, processes for high volume production, experimental and simulation tools, etc. For example, even routine procedures such as failure characterization may require the development of new tools for investigating nano-scale phenomena. Business needs include the development of an effective, high volume supply chain for nano-materials and devices, disruptive product platforms, and visible performance impact on the end consumer. An equally significant long-term industry need is the availability of science and engineering graduates with a multidisciplinary focus and a deep understanding of the fundamentals of nano-technology, that can harness the technology to create revolutionary products.

  15. Extension Learners' Use of Electronic Technology

    Science.gov (United States)

    Guenthner, Joseph F.; Swan, Benjamin G.

    2011-01-01

    Extension clientele use electronic technology for entertainment, communication, and business. Educational programs that use electronic technology can enhance learning. To learn more about use of electronic technology among Extension clientele, we surveyed 80 university students and 135 potato farmers. We found that the farmers were likely to use…

  16. Special Technologies Related to Electron Beam Welding

    Institute of Scientific and Technical Information of China (English)

    Zhao; Haiyan; Cai; Zhipeng; Wang; Xichang

    2007-01-01

    In order to improve the manufacturing quality of electron beam welding,some technologies are developed by using the special features of electron beam.Comparing with the conventional electron beam welding,the usage of multi-beam technology and micro-beam technology are introduced.In addition.the development of beam diagnostic system is also presented.

  17. Polyimide-Epoxy Composites with Superior Bendable Properties for Application in Flexible Electronics

    Science.gov (United States)

    Lee, Sangyoup; Yoo, Taewon; Han, Youngyu; Kim, Hanglim; Han, Haksoo

    2017-03-01

    The need for flexible electronics with outstanding bending properties is increasing due to the demand for wearable devices and next-generation flexible or rollable smartphones. In addition, the requirements for flexible or rigid-flexible electronics are sharply increasing to achieve the design of space-saving electronic devices. In this regard, coverlay (CL) film is a key material used in the bending area of flexible electronics, albeit infrequently. Because flexible electronics undergo folding and unfolding numerous times, CL films with superior mechanical and bending properties are required so that the bending area can endure such severe stress. However, because current CL films are only used for a designated bending area in the flexible electronics panel, their highly complicated and expensive manufacturing procedure is a disadvantage. In addition, the thickness of CL films must be decreased to satisfy the ongoing requirement for increasingly thin products. However, due to the limitations of the two-layer structure of existing CL films, the manufacturing process cannot be made more cost effective by simply applying more thin film onto the board. To address this problem, we have developed liquid coverlay inks (LCIs) with superior bendable properties, in comparison with CL films, when applied onto flexible electronics using a screen-printing method. The results show that LCIs have the potential to become one of the leading candidates to replace existing CL films because of their lower cost and faster manufacturing process.

  18. Polyimide-Epoxy Composites with Superior Bendable Properties for Application in Flexible Electronics

    Science.gov (United States)

    Lee, Sangyoup; Yoo, Taewon; Han, Youngyu; Kim, Hanglim; Han, Haksoo

    2017-08-01

    The need for flexible electronics with outstanding bending properties is increasing due to the demand for wearable devices and next-generation flexible or rollable smartphones. In addition, the requirements for flexible or rigid-flexible electronics are sharply increasing to achieve the design of space-saving electronic devices. In this regard, coverlay (CL) film is a key material used in the bending area of flexible electronics, albeit infrequently. Because flexible electronics undergo folding and unfolding numerous times, CL films with superior mechanical and bending properties are required so that the bending area can endure such severe stress. However, because current CL films are only used for a designated bending area in the flexible electronics panel, their highly complicated and expensive manufacturing procedure is a disadvantage. In addition, the thickness of CL films must be decreased to satisfy the ongoing requirement for increasingly thin products. However, due to the limitations of the two-layer structure of existing CL films, the manufacturing process cannot be made more cost effective by simply applying more thin film onto the board. To address this problem, we have developed liquid coverlay inks (LCIs) with superior bendable properties, in comparison with CL films, when applied onto flexible electronics using a screen-printing method. The results show that LCIs have the potential to become one of the leading candidates to replace existing CL films because of their lower cost and faster manufacturing process.

  19. Cooling Technology for Electronic Computers

    Science.gov (United States)

    Nakayama, Wataru

    The rapid growth of data processing speed in computers has been sustained by the advances in cooling technology. This article first presents a review of the published data of heat loads in recent Japanese large-scale computers. The survey indicates that, since around 1980, the high-level integration of microelectronic circuits has brought about almost four fold increase in the power dissipation from logic chips. The integration also has invited the evolutions of multichip modules and new schemes of electronic interconnections. Forced convection air-cooling and liquid cooling coupled with thermal connectors are discussed with reference to the designs employed in actual computers. More advanced cooling schemes are also discussed. Finally, the importance of thermal environmental control of computer rooms is emphasized.

  20. New Electronic Technologies for Facilitating Differentiated Instruction

    Science.gov (United States)

    Scalise, Kathleen

    2009-01-01

    With electronic technologies, differentiated instruction has the same meaning as in traditional instruction, but different tools are available for teachers to help students learn. Electronic technologies for differentiated instruction can add powerful new types of media inclusion, levels of interactivity, and response actions. This rapidly…

  1. Nature of Science and Technology Representations From a Teacher's Stse Perspective at Normal Superior Schools

    Directory of Open Access Journals (Sweden)

    Rosa Nidia Tuay-Sigua

    2016-01-01

    Full Text Available Throughout this paper, this research results about academic training based on CTSA relations are presented. These results, highlight among other aspects, the importance of guaranteeing Citizenship proposal of socio-enviromental decisions, based on scientific and technological aspects.The research is based on a qualitative paradigm, with interpretative-descriptive characteristics, this perspective allows to take account of more complex aspects, such as social interactions, and also contributes to the analysis of scientific and technological interactions with socio-environmental contexts. This study is aimed to Escuelas Normales Superiores (Normal Superior Schools teachers, whom had worked with this proposal, focused on building Didactic units which take account of CTSA relations.

  2. Polymer electronics a flexible technology

    CERN Document Server

    Technology, Rapra

    2009-01-01

    The worldwide market for polymer electronic products has been estimated to be worth up to £15 billion by 2015 and the opportunity for new markets could be as high as £125 billion by 2025.'The rapid development of polymer electronics has revealed the possibility for transforming the electronics market by offering lighter, flexible and more cost effective alternatives to conventional materials and products. With applications ranging from printed, flexible conductors and novel semiconductor components to intelligent labels and large area displays and solar panels, products that were previously un

  3. Electronics Technology. Performance Objectives. Basic Course.

    Science.gov (United States)

    Campbell, Guy

    Several intermediate performance objectives and corresponding criterion measures are listed for each of 20 terminal objectives for a basic electronics technology course. The materials were developed for a two-semester course (2 hours daily) designed to include instruction in basic electricity and electronic fundamentals, and to develop skills and…

  4. Nanocluster technologies for electronics design

    CERN Document Server

    Parker, A J

    2001-01-01

    based electronic systems. The work presented in this thesis covers an investigation into the use of metal nanoclusters in nanoelectronics design. Initial studies explored the interactions of the dodecanethiol passivated gold nanocluster, held in solution with toluene, and the native oxide covered silicon surface. Deposition of the clusters is achieved by pippetting mu-litre quantities of the solution onto the surface, and allowing the solvent to evaporate leaving the clusters as residue. Patterning of the surface with micron scale photoresist structures prior to cluster exposure, led to the selective aggregation of cluster deposits along the resist boundaries. An extension of this technique, examined the flow of the cluster solution along photoresist structures which extended beyond the solution droplet. Investigation into the electronic properties of nanocluster arrays generated non-linear current-voltage curves, which are explained in terms of two very simple models. These results cast doubt over the suitab...

  5. Active vacuum brazing of CNT films to metal substrates for superior electron field emission performance

    Science.gov (United States)

    Longtin, Rémi; Sanchez-Valencia, Juan Ramon; Shorubalko, Ivan; Furrer, Roman; Hack, Erwin; Elsener, Hansrudolf; Gröning, Oliver; Greenwood, Paul; Rupesinghe, Nalin; Teo, Kenneth; Leinenbach, Christian; Gröning, Pierangelo

    2015-02-01

    The joining of macroscopic films of vertically aligned multiwalled carbon nanotubes (CNTs) to titanium substrates is demonstrated by active vacuum brazing at 820 °C with a Ag-Cu-Ti alloy and at 880 °C with a Cu-Sn-Ti-Zr alloy. The brazing methodology was elaborated in order to enable the production of highly electrically and thermally conductive CNT/metal substrate contacts. The interfacial electrical resistances of the joints were measured to be as low as 0.35 Ω. The improved interfacial transport properties in the brazed films lead to superior electron field-emission properties when compared to the as-grown films. An emission current of 150 μA was drawn from the brazed nanotubes at an applied electric field of 0.6 V μm-1. The improvement in electron field-emission is mainly attributed to the reduction of the contact resistance between the nanotubes and the substrate. The joints have high re-melting temperatures up to the solidus temperatures of the alloys; far greater than what is achievable with standard solders, thus expanding the application potential of CNT films to high-current and high-power applications where substantial frictional or resistive heating is expected.

  6. Electronic technology and the SLD detector

    Energy Technology Data Exchange (ETDEWEB)

    Fox, J.D.; Dean, T.; Fox, M.J.; Freytag, D.; Gioumousis, A.; Haller, G.; Hoeflich, J.; Horelick, D.; Kang, H; Mazaheri, G.; Nelson, D.J.; Olsen, J.J.; Oxoby, G.; Paffrath, L.; Stiles, P.; Yim, A. (Stanford Linear Accelerator Center, Menlo Park, CA (USA)); Bacchetta, N. (Istituto Nazionale di Fisica Nucleare, Padua (Italy)); Bilei, G.M. (Istituto Nazionale di Fisica Nucleare, Perugia (Italy)); Carpinelli, M.; Cast

    1990-06-01

    The SLD detector consists of five major subsystems, each with associated front-end electronics and an integrated FASTBUS control and data acquisition system. This paper highlights the choices among electronic technologies that have been developed for the SLD detector electronics. The common control, calibration, and data acquisition architectures are described. The functions of selected SLD integrated circuits, standard cells, gate arrays, and hybrids are summarized, and the integration of these functions into the common data acquisition path is described. Particular attention is directed to four areas of electronic technology developed for the SLD detector: the preamplifier hybrid designs are compared to their performance and implementation examined; the application of full custom CMOS digital circuits in SLD is compared to gate array and EPLD (electrically programmable logic device) implementations; the fiberoptic signal transmission techniques in SLD are examined and the data rates and link topology are presented; and finally, the packaging, power consumption, and cooling requirements for system functions resident inside the detector structure are explored. The rationale for the implementation choices in the SLD electronics is presented so that others might benefit from our experience.

  7. Organic electronics emerging concepts and technologies

    CERN Document Server

    Santato, Clara

    2013-01-01

    An overview of the tremendous potential of organic electronics, concentrating on those emerging topics and technologies that will form the focus of research over the next five to ten years. The young and energetic team of editors with an excellent research track record has brought together internationally renowned authors to review up-and-coming topics, some for the first time, such as organic spintronics, iontronics, light emitting transistors, organic sensors and advanced structural analysis. As a result, this book serves the needs of experienced researchers in organic electronics, graduate

  8. Technologies and Designs for Electronic Nanocomputers

    Science.gov (United States)

    Montemerlo, Michael S.; Love, J. Christopher; Opiteck, Gregory J.; Goldhaber, David J.; Ellenbogen, James C.

    1995-01-01

    Diverse space-related applications have been proposed for microscopic and sub-microscopic structures, mechanisms, and 'organisms'. To govern their functions, many of these tiny systems will require even smaller, nanometer-scale programmable computers, i.e. 'nanocomputers' on-board. This paper provides an overview of the results of a nearly two-year study of the technologies and designs that presently are in development for electronic nanocomputers. Strengths and weaknesses of the various technologies and designs are discussed, as well as promising directions for remedying some of the present research issues in this area. The presentation is a synopsis of a longer MITRE review article on the same subject.

  9. 29 CFR 1615.135 - Electronic and information technology requirements.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Electronic and information technology requirements. 1615... INFORMATION TECHNOLOGY § 1615.135 Electronic and information technology requirements. (a) Development, procurement, maintenance, or use of electronic and information technology.—When developing,...

  10. Electron Beam Technology for Environmental Pollution Control.

    Science.gov (United States)

    Chmielewski, Andrzej G; Han, Bumsoo

    2016-10-01

    Worldwide, there are over 1700 electron beam (EB) units in commercial use, providing an estimated added value to numerous products, amounting to 100 billion USD or more. High-current electron accelerators are used in diverse industries to enhance the physical and chemical properties of materials and to reduce undesirable contaminants such as pathogens, toxic byproducts, or emissions. Over the past few decades, EB technologies have been developed aimed at ensuring the safety of gaseous and liquid effluents discharged to the environment. It has been demonstrated that EB technologies for flue gas treatment (SO x and NO x removal), wastewater purification, and sludge hygienization can be effectively deployed to mitigate environmental degradation. Recently, extensive work has been carried out on the use of EB for environmental remediation, which also includes the removal of emerging contaminants such as VOCs, endocrine disrupting chemicals (EDCs), and potential EDCs.

  11. The Intelligent Technologies of Electronic Information System

    Science.gov (United States)

    Li, Xianyu

    2017-08-01

    Based upon the synopsis of system intelligence and information services, this paper puts forward the attributes and the logic structure of information service, sets forth intelligent technology framework of electronic information system, and presents a series of measures, such as optimizing business information flow, advancing data decision capability, improving information fusion precision, strengthening deep learning application and enhancing prognostic and health management, and demonstrates system operation effectiveness. This will benefit the enhancement of system intelligence.

  12. Electronic reminding technology for cognitive impairment.

    Science.gov (United States)

    Mason, Sarah; Craig, David; O'Neill, Sonia; Donnelly, Mark; Nugent, Chris

    Demographic changes highlight the need to address disabilities associated with the costly morbidities of old age, such as dementia. Memory impairment associated with dementia represents a significant challenge for many older people. Difficulties occur in carrying out activities in their entirety or in commencing them at all. Technology has the potential to help individuals overcome the barriers created by cognitive disability in terms of performing activities of daily living and therefore help to maintain independence and enhance quality of life (Czaja, 2005). This literature review examines the current reported research, which employs electronic reminding technology to support individuals with cognitive impairment. These devices range from everyday technologies, such as phones, to sophisticated interactive devices with specifically designed software. A summary of the current evidence base is presented and recommendations for future practice are made.

  13. Engineering, Trade, and Technical Cluster. Task Analyses. Drafting and Design Technology, Precision Machining Technology, Electronics Technology.

    Science.gov (United States)

    Henrico County Public Schools, Glen Allen, VA. Virginia Vocational Curriculum and Resource Center.

    Developed in Virginia, this publication contains task analysis guides to support selected tech prep programs that prepare students for careers in the engineering, trade, and technical cluster. Three occupations are profiled: drafting and design technology, precision machining technology, and electronics technology. Each guide contains the…

  14. Electrical and electronic principles and technology

    CERN Document Server

    John Bird

    2013-01-01

    This much-loved textbook introduces electrical and electronic principles and technology to students who are new to the subject. Real-world situations and engineering examples put the theory into context. The inclusion of worked problems with solutions really help aid your understanding and further problems then allow you to test and confirm you have mastered each subject. In total the books contains 410 worked problems, 540 further problems, 340 multiple-choice questions, 455 short-answer questions, and 7 revision tests with answers online.This an ideal text for vocational courses enabling a s

  15. Applied Physics Modules Selected for Electrical and Electronic Technologies.

    Science.gov (United States)

    Waring, Gene

    Designed for individualized use in an applied physics course in postsecondary vocational-technical education, this series of twenty-three learning modules is equivalent to the content of two quarters of a five-credit hour class in electrical technology, electronic service technology, electronic engineering technology, or electromechanical…

  16. Technology Acceptance of Electronic Medical Records by Nurses

    Science.gov (United States)

    Stocker, Gary

    2010-01-01

    The purpose of this study was to evaluate the Technology Acceptance Model's (TAM) relevance of the intention of nurses to use electronic medical records in acute health care settings. The basic technology acceptance research of Davis (1989) was applied to the specific technology tool of electronic medical records (EMR) in a specific setting…

  17. 48 CFR 1352.239-71 - Electronic and information technology.

    Science.gov (United States)

    2010-10-01

    ... technology. 1352.239-71 Section 1352.239-71 Federal Acquisition Regulations System DEPARTMENT OF COMMERCE... Electronic and information technology. As prescribed in 48 CFR 1339.270(a), insert the following provision: Electronic and Information Technology (APR 2010) (a) To be considered eligible for award, offerors...

  18. Plasma Cathode Electron Sources Physics, Technology, Applications

    CERN Document Server

    Oks, Efim

    2006-01-01

    This book fills the gap for a textbook describing this kind of electron beam source in a systematic and thorough manner: from physical processes of electron emission to examples of real plasma electron sources and their applications.

  19. Creating science and technology superiority,increasing marine equipment manufacturing capability to build China into world No.1 shipbuilding country

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    The creation of science and technol-ogy superiority is the basic driving forceto push forward the development ofChina’s shipbuilding Industry by leaps andbounds,and achieve the goal of buildingChina into the world number one ship-building country. 1.The strength of science and tech-nology is the decisive factor affecting ourcompetitiveness in the world market The shipbuilding industry is a labour-intensive,capital-intensive and technology-intensive industry.However,ever since the90’s of the last century,with the wide ap-plication of new technology and new manu-facturing process,the productivity of shipconstruction has increased significantly,therole of primary production elements suchas low-priced labor has weakened dramati-cally in the market competition.With thecontinuous increase of technology inten-siveness in the shipbuilding industry,thestrength of science and technology is becoming the most important factor of mar-ket competitiveness.In the last ten years,in order to strengthen their technical sup

  20. 48 CFR 311.7000 - Defining electronic information technology requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 4 2010-10-01 2010-10-01 false Defining electronic information technology requirements. 311.7000 Section 311.7000 Federal Acquisition Regulations System HEALTH... Accessibility Standards 311.7000 Defining electronic information technology requirements. HHS staff that...

  1. Integrating Instructional Technology with Information Technology and Its Implications for Designing Electronic Learning Systems.

    Science.gov (United States)

    Abdelraheem, Ahmed Yousif

    2005-01-01

    In this paper the concepts of technology, instructional technology, and information technology are presented. The integration of instructional technology, and information technology is established and its implications for electronic learning systems design are discussed. One can say that: information and instructional designers can design…

  2. Synthesis, electrochemistry, STM investigation of oligothiophene self-assemblies with superior structural order and electronic properties

    Science.gov (United States)

    Kuo, Cheng-Yu; Liu, Yinghao; Yarotski, Dmitry; Li, Hao; Xu, Ping; Yen, Hung-Ju; Tretiak, Sergei; Wang, Hsing-Lin

    2016-12-01

    Three oligothiophene (terthiophene, tetrathiophene and pentathiophene) derivatives are synthesized and their monolayer self-assemblies on gold (Au) are prepared via Au-S covalent bond. Our UV-Vis experimental characterization of solution reveals the dependence of the optical properties on the conjugation length of the oligothiophenes, which compares well with Time-Dependent Density Functional Theory (TDDFT) simulations of spectra of individual chromophores. Photoluminescent spectra of thin films show pronounced red shifts compared to that of solutions, suggesting strong inter-oligomer interactions. The comparative studies of cyclic voltammograms of tetrathiophene from solution, cast film and self-assembled monolayer (SAM) indicate presence of one, two, and three oxidized species in these samples, respectively, suggesting a very strong electronic coupling between tetrathiophene molecules in the SAM. Scanning tunneling microscopy (STM) imaging of SAMs of the tetrathiophene on an atomically flat Au surface exhibits formation of monolayer assemblies with molecular order, and the molecular packing appears to show an overlay of oligothiophene molecules on top of another one. In contrast, the trimer and pentamer images show only aggregated species lacking long-range order on the molecular level. Such trends in going from disordered-ordered-disordered monolayer assemblies are mainly due to a delicate balance between inter-chromophore π-π couplings, hydrophobic interaction and the propensity to form Au-S covalent bond. Such hypothesis has been validated by our computational results suggesting different interaction patterns of oligothiophenes with odd numbered and even numbered thiophene repeat units placed in a dimer configuration. Observed correlations between oligomer geometry and structural order of monolayer assembly elucidate important structure-property relationships and have implications for these molecular structures in organic optoelectronic devices and energy

  3. Electronic Aggression: New Technology and Youth Violence

    Science.gov (United States)

    ... Recommend on Facebook Tweet Share Compartir Publications Electronic Media and Youth Violence: A CDC Issue Brief for Educators and Caregivers [PDF 5.5MB] Electronic Media and Youth Violence: A CDC Research Brief for Researchers [PDF 11MB] ...

  4. HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.ELECTRON BEAM TECHNOLOGY - INNOVATIVE TECHNOLOGY EVALUATION REPORT

    Science.gov (United States)

    This report evaluates a high-voltage electron beam (E-beam) technology's ability to destroy volatile organic compounds (VOCs) and other contaminants present in liquid wastes. Specifically, this report discusses performance and economic data from a Superfund Innovative Technology...

  5. Typical presentation to evaluate NFC technology in electronic mobile payments

    Directory of Open Access Journals (Sweden)

    Shima Asadbeigi

    2016-07-01

    Full Text Available In recent years, electronic micro payments by cell phones have been possible. Some activities have been done in this field as well. Mobile near field communication (NFC technology, which is a standard mobile method for connecting electronic devices at near distances, has grabbed a lot of attention in order to pay mobile micro payments and electronic payment services by financial institutions, payment service companies, SIM cards manufacturers and operators. The beneficiary organizations need to meet some requirements such as management preparation. This paper aims to detect different NFC technology uses and study and rank the main factors of success in implementation of this technology in organization by applying analytic hierarchy process. The humanitarian specialists and environmental and technological experts should be considered in order to use NFC technology in mobile payments. Among 81 sub-criteria, security and privacy are the most important factors for implementing NFC technology successfully.

  6. The role of electronic communication technology in adolescent dating violence.

    Science.gov (United States)

    Draucker, Claire Burke; Martsolf, Donna S

    2010-08-01

    Adolescent dating violence and electronic aggression are significant public health problems. The purpose of this study was to (a) identify ways in which technology is used in dating violence and (b) present examples of dating violence in which electronic aggression played a salient role. The data set included the transcribed narratives of 56 young adults who had described their adolescent dating violence experiences for an on going study. Eight ways in which technology is used in dating violence were identified using qualitative descriptive methods. The findings indicate that electronic communication technology influences dating violence by redefining boundaries between dating partners.

  7. Electronic control/display interface technology

    Science.gov (United States)

    Parrish, R. V.; Busquets, A. M.; Murray, R. F.; Hatfield, J. J.

    1985-01-01

    An effort to produce a representative workstation for the Space Station Data Management Test Bed that provides man/machine interface design options for consolidating, automating, and integrating the space station work station, and hardware/software technology demonstrations of space station applications is discussed. The workstation will emphasize the technologies of advanced graphics engines, advanced display/control medias, image management techniques, multifunction controls, and video disk utilizations.

  8. A Survey of Power Electronics Applications in Aerospace Technologies

    Science.gov (United States)

    Kankam, M. David; Elbuluk, Malik E.

    2001-01-01

    The insertion of power electronics in aerospace technologies is becoming widespread. The application of semiconductor devices and electronic converters, as summarized in this paper, includes the International Space Station, satellite power system, and motor drives in 'more electric' technology applied to aircraft, starter/generators and reusable launch vehicles. Flywheels, servo systems embodying electromechanical actuation, and spacecraft on-board electric propulsion are discussed. Continued inroad by power electronics depends on resolving incompatibility of using variable frequency for 400 Hz-operated aircraft equipment. Dual-use electronic modules should reduce system development cost.

  9. Storage Ring Technology for Free Electron Lasers.

    Science.gov (United States)

    1984-04-01

    new starting mode, it is clear that an arbitrary third mode amplitude can be added 1ithout changing the result. It follows by induction that for an...du laser. On montre que la puissance moyenne est en accord avec la limite imposee par le chauffage du paquet d’electrons (limite de Renieri

  10. Scientific Inquiry into Home Electronic Technology Usage

    Science.gov (United States)

    Lazaros, Edward J.; Spotts, Thomas H.; Verdon, Jessica E.

    2010-01-01

    This activity promotes ways to save electricity in the home. Students identify electronic devices in the home and examine wattage, hours of use per month, estimated wattage per month, kilowatt hours per month, average retail price per kilowatt hour in each state, and the estimated cost per month. Students gain an appreciation for how saving power…

  11. Information Technology in project-organized electronic and computer technology engineering education

    DEFF Research Database (Denmark)

    Nielsen, Kirsten Mølgaard; Nielsen, Jens Frederik Dalsgaard

    1999-01-01

    This paper describes the integration of IT in the education of electronic and computer technology engineers at Institute of Electronic Systems, Aalborg Uni-versity, Denmark. At the Institute Information Technology is an important tool in the aspects of the education as well as for communication...

  12. CERN's web application updates for electron and laser beam technologies

    CERN Document Server

    Sigas, Christos

    2017-01-01

    This report describes the modifications at CERN's web application for electron and laser beam technologies. There are updates at both the front and the back end of the application. New electron and laser machines were added and also old machines were updated. There is also a new feature for printing needed information.

  13. Use of Electronic Technologies by People with Intellectual Disabilities

    Science.gov (United States)

    Carey, Allison C.; Friedman, Mark G.; Bryen, Diane Nelson

    2005-01-01

    Today's electronic technologies, including computers, cell phones, Internet, and electronic organizers, hold great promise for individuals with intellectual disabilities, yet little research has been conducted to explore patterns of use among this population. Drawing upon a survey of 83 adults with intellectual disabilities, we examined factors…

  14. Flexible technology for Electronics: Its Derivatives and Possibilities

    Directory of Open Access Journals (Sweden)

    Deovrat Phal

    2014-02-01

    Full Text Available With the inkjet printing technology becoming more popular, integration of circuits developed on flexible substrates which are easily embedded inside the machine as against the rigid PCB circuits is becoming more prevalent. Much of the research has been done in applications of such circuits in human body implants or for other low cost applications. This paper concentrates particularly on applications of such circuits in the field of consumer electronics, disposable electronics, display technology and discusses the derivatives of this technology and its future possibilities.

  15. Power electronics - The key technology for Renewable Energy Systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke; Yang, Yongheng

    2014-01-01

    and effectively, energy conversion systems, currently based on power electronics technology, will again play an essential role in this energy paradigm shift. Using highly efficient power electronics in power generation, power transmission/distribution and end-user application, together with advanced control...... solutions, can pave the way for renewable energies. In light of this, some of the most emerging renewable energies, e.g. wind energy and photovoltaic, which by means of power electronics are changing character as a major part in the electricity generation, are explored in this paper. Issues like technology...... development, implementation, power converter technologies, control of the systems, and synchronization are addressed. Special focuses are paid on the future trends in power electronics for those systems like how to lower the cost of energy and to develop emerging power devices and better reliability tool....

  16. The NASA Electronic Parts and Packaging (NEPP) Program: Insertion of New Electronics Technologies

    Science.gov (United States)

    LaBel, Kenneth A.; Sampson, Michael J.

    2007-01-01

    This viewgraph presentation gives an overview of NASA Electronic Parts and Packaging (NEPP) Program's new electronics technology trends. The topics include: 1) The Changing World of Radiation Testing of Memories; 2) Even Application-Specific Tests are Costly!; 3) Hypothetical New Technology Part Qualification Cost; 4) Where we are; 5) Approaching FPGAs as a More Than a "Part" for Reliability; 6) FPGAs Beget Novel Radiation Test Setups; 7) Understanding the Complex Radiation Data; 8) Tracking Packaging Complexity and Reliability for FPGAs; 9) Devices Supporting the FPGA Need to be Considered; 10) Summary of the New Electronic Technologies and Insertion into Flight Programs Workshop; and 11) Highlights of Panel Notes and Comments

  17. Handbook of Machine Olfaction: Electronic Nose Technology

    Science.gov (United States)

    Pearce, Tim C.; Schiffman, Susan S.; Nagle, H. Troy; Gardner, Julian W.

    2003-02-01

    "Electronic noses" are instruments which mimic the sense of smell. Consisting of olfactory sensors and a suitable signal processing unit, they are able to detect and distinguish odors precisely and at low cost. This makes them very useful for a remarkable variety of applications in the food and pharmaceutical industry, in environmental control or clinical diagnostics and more. The scope covers biological and technical fundamentals and up-to-date research. Contributions by renowned international scientists as well as application-oriented news from successful "e-nose" manufacturers give a well-rounded account of the topic, and this coverage from R&D to applications makes this book a must-have read for e-nose researchers, designers and users alike.

  18. Characterizing ammonia emissions from swine farms in eastern North Carolina: part 2--potential environmentally superior technologies for waste treatment.

    Science.gov (United States)

    Aneja, Viney P; Arya, S Pal; Rumsey, Ian C; Kim, D-S; Bajwa, K; Arkinson, H L; Semunegus, H; Dickey, D A; Stefanski, L A; Todd, L; Mottus, K; Robarge, W P; Williams, C M

    2008-09-01

    The need for developing environmentally superior and sustainable solutions for managing the animal waste at commercial swine farms in eastern North Carolina has been recognized in recent years. Program OPEN (Odor, Pathogens, and Emissions of Nitrogen), funded by the North Carolina State University Animal and Poultry Waste Management Center (APWMC), was initiated and charged with the evaluation of potential environmentally superior technologies (ESTs) that have been developed and implemented at selected swine farms or facilities. The OPEN program has demonstrated the effectiveness of a new paradigm for policy-relevant environmental research related to North Carolina's animal waste management programs. This new paradigm is based on a commitment to improve scientific understanding associated with a wide array of environmental issues (i.e., issues related to the movement of N from animal waste into air, water, and soil media; the transmission of odor and odorants; disease-transmitting vectors; and airborne pathogens). The primary focus of this paper is on emissions of ammonia (NH3) from some potential ESTs that were being evaluated at full-scale swine facilities. During 2-week-long periods in two different seasons (warm and cold), NH3 fluxes from water-holding structures and NH3 emissions from animal houses or barns were measured at six potential EST sites: (1) Barham farm--in-ground ambient temperature anaerobic digester/energy recovery/greenhouse vegetable production system; (2) BOC #93 farm--upflow biofiltration system--EKOKAN; (3) Carrolls farm--aerobic blanket system--ISSUES-ABS; (4) Corbett #1 farm--solids separation/ gasification for energy and ash recovery centralized system--BEST; (5) Corbett #2 farm--solid separation/ reciprocating water technology--ReCip; and (6) Vestal farm--Recycling of Nutrient, Energy and Water System--ISSUES-RENEW. The ESTs were compared with similar measurements made at two conventional lagoon and spray technology (LST) farms (Moore

  19. Automotive Technology Evolved by Electrical and Electronic Systems

    Science.gov (United States)

    Teratani, Tatsuo; Okuma, Shigeru

    Automotive electrical and electronic systems, e.g. EHV, FCV, future X-By-Wire, have recently been introduced or planned in place of mechanical systems. Drivers are demanding environmental performance (fuel consumption and weight reduction), safety and comfort. For general use of the new technologies, evolution of the automotive technology is required, including energy conversion efficiency improvement, size and weight reduction of components, cost reduction and high reliability. This paper discusses and summarizes the next generation power systems, the future vehicle image, power source combinations, and problems to be solved for development of automotive electronics.

  20. Advances in Electronic-Nose Technologies Developed for Biomedical Applications

    Directory of Open Access Journals (Sweden)

    Alphus D. Wilson

    2011-01-01

    Full Text Available The research and development of new electronic-nose applications in the biomedical field has accelerated at a phenomenal rate over the past 25 years. Many innovative e-nose technologies have provided solutions and applications to a wide variety of complex biomedical and healthcare problems. The purposes of this review are to present a comprehensive analysis of past and recent biomedical research findings and developments of electronic-nose sensor technologies, and to identify current and future potential e-nose applications that will continue to advance the effectiveness and efficiency of biomedical treatments and healthcare services for many years. An abundance of electronic-nose applications has been developed for a variety of healthcare sectors including diagnostics, immunology, pathology, patient recovery, pharmacology, physical therapy, physiology, preventative medicine, remote healthcare, and wound and graft healing. Specific biomedical e-nose applications range from uses in biochemical testing, blood-compatibility evaluations, disease diagnoses, and drug delivery to monitoring of metabolic levels, organ dysfunctions, and patient conditions through telemedicine. This paper summarizes the major electronic-nose technologies developed for healthcare and biomedical applications since the late 1980s when electronic aroma detection technologies were first recognized to be potentially useful in providing effective solutions to problems in the healthcare industry.

  1. Managing electronic records methods, best practices, and technologies

    CERN Document Server

    Smallwood, Robert F

    2013-01-01

    The ultimate guide to electronic records management, featuring a collaboration of expert practitioners including over 400 cited references documenting today's global trends, standards, and best practices Nearly all business records created today are electronic, and are increasing in number at breathtaking rates, yet most organizations do not have the policies and technologies in place to effectively organize, search, protect, preserve, and produce these records. Authored by an internationally recognized expert on e-records in collaboration with leading subject matter experts worldwide

  2. Biomedical stretchable sytems using MID based stretchable electronics technology.

    Science.gov (United States)

    Axisa, F; Brosteaux, D; De Leersnyder, E; Bossuyt, F; Vanfleteren, J; Hermans, B; Puers, R

    2007-01-01

    In order to fit human body, flexibility, or even better stretchability is requested for biomedical systems like implants or smart clothes. A stretchable electronic technology has been developed. This can provide highly stretchable interconnections fully compatible with PCB technologies. In order to prove the feasibility of complex biomedical systems like inner body implants or wearable systems, a variety of stretchable systems has been designed from sensor to power source systems.

  3. Technology Corner: Dating of Electronic Hardware for Prior Art Investigations

    Directory of Open Access Journals (Sweden)

    Sellam Ismail

    2012-03-01

    Full Text Available In many legal matters, specifically patent litigation, determining and authenticating the date of computer hardware or other electronic products or components is often key to establishing the item as legitimate evidence of prior art. Such evidence can be used to buttress claims of technologies available or of events transpiring by or at a particular date.In 1945, the Electronics Industry Association published a standard, EIA 476-A, standardized in the reference Source and Date Code Marking (Electronic Industries Association, 1988.(see PDF for full tech corner

  4. Woven electronics: a new perspective for wearable technology.

    Science.gov (United States)

    Locci, Simone; Maccioni, Maurizio; Orgiu, Emanuele; Bonfiglio, Annalisa

    2007-01-01

    Endowing a textile substrate (i.e. fibers, yarns, fabrics) with active functions is a new powerful concept, that has recently given rise to several interesting contributions. In this paper, we will describe a possible approach to this intriguing objective, focusing on the technology and on the electronic model. Future applications for this technology will allow to obtain, for instance, matrices of sensors assembled by textile technology and will ensure to obtain for wearable devices the necessary properties of drapability and conformity to the body that are required for these applications.

  5. Recycling of the Electronic Waste Applying the Plasma Reactor Technology

    Science.gov (United States)

    Lázár, Marián; Jasminská, Natália; Čarnogurská, Mária; Dobáková, Romana

    2016-12-01

    The following paper discusses a high-temperature gasification process and melting of electronic components and computer equipment using plasma reactor technology. It analyses the marginal conditions of batch processing, as well as the formation of solid products which result from the procedure of waste processing. Attention is also paid to the impact of the emerging products on the environment.

  6. Power Electronics as key technology in wind turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede

    2005-01-01

    This paper discuss the development in wind turbines in a two-decade perspective looking at the technology based on track records. Different power electronic topologies for interfacing the wind turbine to the grid are discussed and related to the possibility for the wind turbine to act as a power...

  7. Recycling of the Electronic Waste Applying the Plasma Reactor Technology

    Directory of Open Access Journals (Sweden)

    Lázár Marián

    2016-12-01

    Full Text Available The following paper discusses a high-temperature gasification process and melting of electronic components and computer equipment using plasma reactor technology. It analyses the marginal conditions of batch processing, as well as the formation of solid products which result from the procedure of waste processing. Attention is also paid to the impact of the emerging products on the environment.

  8. The Costs of Information Technology and the Electronic Library.

    Science.gov (United States)

    Tebbetts, Diane R.

    2000-01-01

    Discusses the impact of information technology requirements on the costs of electronic libraries. Addresses key questions concerning hardware, software and network installation and upgrades and provides strategies for dealing with the needs for continuous funding and long-term financing that are essential for keeping up with the requirements of…

  9. Applications and Advances in Electronic-Nose Technologies

    Directory of Open Access Journals (Sweden)

    Manuela Baietto

    2009-06-01

    Full Text Available Electronic-nose devices have received considerable attention in the field of sensor technology during the past twenty years, largely due to the discovery of numerous applications derived from research in diverse fields of applied sciences. Recent applications of electronic nose technologies have come through advances in sensor design, material improvements, software innovations and progress in microcircuitry design and systems integration. The invention of many new e-nose sensor types and arrays, based on different detection principles and mechanisms, is closely correlated with the expansion of new applications. Electronic noses have provided a plethora of benefits to a variety of commercial industries, including the agricultural, biomedical, cosmetics, environmental, food, manufacturing, military, pharmaceutical, regulatory, and various scientific research fields. Advances have improved product attributes, uniformity, and consistency as a result of increases in quality control capabilities afforded by electronic-nose monitoring of all phases of industrial manufacturing processes. This paper is a review of the major electronic-nose technologies, developed since this specialized field was born and became prominent in the mid 1980s, and a summarization of some of the more important and useful applications that have been of greatest benefit to man.

  10. Technology station in electronics at the Tshwane University of Technology: strengthening technological innovation activities amongst SMEs and students

    CSIR Research Space (South Africa)

    Jacobs, SJ

    2009-01-01

    Full Text Available This article focuses on how the competence and capacity within the Faculty of Engineering and the Built Environment, specifically the electronic/electrical discipline, at the Tshwane University of Technology is utilised to support Small Medium...

  11. International Conference on NextGen Electronic Technologies

    CERN Document Server

    Thalmann, Nadia; Bhaaskaran, V

    2017-01-01

    This book is a collection of keynote lectures from international experts presented at International Conference on NextGen Electronic Technologies (ICNETS2-2016). ICNETS2 encompasses six symposia covering all aspects of electronics and communications domains, including relevant nano/micro materials and devices . This volume comprises of recent research in areas like computational signal processing analysis, intelligent embedded systems, nanoelectronic materials and devices, optical and microwave technologies, VLSI design: circuits systems and application, and wireless communication networks, and the internet of things. The contents of this book will be useful to researchers, professionals, and students working in the core areas of electronics and their applications, especially to signal processing, embedded systems, and networking.

  12. Power electronics - key technology for renewable energy systems

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Iov, Florin; Kerekes, Tamas

    2011-01-01

    sources to renewable energy sources. Another is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss trends of the most emerging renewable energy sources, wind energy and photovoltaics, which by means of power electronics...... are changing and challenging the future electrical infrastructure but also contributes steadily more to non-carbon based electricity production. Most focus in the paper is on the power electronics technologies used. In the case of photovoltaics transformer-less systems are discussed as they have the potential...... as efficient as possible. Further, the emerging climate changes is arguing to find sustainable future solutions. Of many options, two major technologies will play important roles to solve parts of those future problems. One is to change the electrical power production from conventional, fossil based energy...

  13. Self-shielded electron linear accelerators designed for radiation technologies

    Science.gov (United States)

    Belugin, V. M.; Rozanov, N. E.; Pirozhenko, V. M.

    2009-09-01

    This paper describes self-shielded high-intensity electron linear accelerators designed for radiation technologies. The specific property of the accelerators is that they do not apply an external magnetic field; acceleration and focusing of electron beams are performed by radio-frequency fields in the accelerating structures. The main characteristics of the accelerators are high current and beam power, but also reliable operation and a long service life. To obtain these characteristics, a number of problems have been solved, including a particular optimization of the accelerator components and the application of a variety of specific means. The paper describes features of the electron beam dynamics, accelerating structure, and radio-frequency power supply. Several compact self-shielded accelerators for radiation sterilization and x-ray cargo inspection have been created. The introduced methods made it possible to obtain a high intensity of the electron beam and good performance of the accelerators.

  14. Control and power electronics technology in renewable energy

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    As the cut-in point of research on control and power electronics technology used in renewable energy, this paper does not aim to analyze particular theories or tech-nologies in this field, but, instead, is to go back to the fountainhead of the issue to illustrate the essential concepts in this field, which are usually neglected and may become bottle-neck of the research. Research experiences have shown that con-fusion and trouble may be created if researchers do not understand these essential concepts well.

  15. Intellectual property in consumer electronics, software and technology startups

    CERN Document Server

    Halt, Jr , Gerald B; Stiles, Amber R; Fesnak, Robert

    2014-01-01

    This book provides a comprehensive guide to procuring, utilizing and monetizing intellectual property rights, tailored for readers in the high-tech consumer electronics and software industries, as well as technology startups.  Numerous, real examples, case studies and scenarios are incorporated throughout the book to illustrate the topics discussed.  Readers will learn what to consider throughout the various creative phases of a product’s lifespan from initial research and development initiatives through post-production.  Readers will gain an understanding of the intellectual property protections afforded to U.S. corporations, methods to pro-actively reduce potential problems, and guidelines for future considerations to reduce legal spending, prevent IP theft, and allow for greater profitability from corporate innovation and inventiveness. • Offers a comprehensive guide to intellectual property for readers in high-tech consumer electronics, software and technology startups; • Uses real case studies...

  16. Component technologies for a recirculating linac free-electron laser

    Science.gov (United States)

    Litvinenko, Vladimir N.; Madey, John M. J.; Vinokurov, Nikolai A.

    1994-05-01

    The key component technologies required for a high average power free-electron laser (FEL) are described. Some basic aspects of approaches for high average power (scalable to megawatt level) accelerators and FELs are presented. A short description of the Novosibirsk 100 kW average power near infrared (IR) FEL driven by a race-track microtron-recuperator is given. The current status and plans for this facility are provided by Institute of Nuclear Physics (Novosibirsk).

  17. Meat Quality Assessment by Electronic Nose (Machine Olfaction Technology

    Directory of Open Access Journals (Sweden)

    Sundar Balasubramanian

    2009-07-01

    Full Text Available Over the last twenty years, newly developed chemical sensor systems (so called “electronic noses” have made odor analyses possible. These systems involve various types of electronic chemical gas sensors with partial specificity, as well as suitable statistical methods enabling the recognition of complex odors. As commercial instruments have become available, a substantial increase in research into the application of electronic noses in the evaluation of volatile compounds in food, cosmetic and other items of everyday life is observed. At present, the commercial gas sensor technologies comprise metal oxide semiconductors, metal oxide semiconductor field effect transistors, organic conducting polymers, and piezoelectric crystal sensors. Further sensors based on fibreoptic, electrochemical and bi-metal principles are still in the developmental stage. Statistical analysis techniques range from simple graphical evaluation to multivariate analysis such as artificial neural network and radial basis function. The introduction of electronic noses into the area of food is envisaged for quality control, process monitoring, freshness evaluation, shelf-life investigation and authenticity assessment. Considerable work has already been carried out on meat, grains, coffee, mushrooms, cheese, sugar, fish, beer and other beverages, as well as on the odor quality evaluation of food packaging material. This paper describes the applications of these systems for meat quality assessment, where fast detection methods are essential for appropriate product management. The results suggest the possibility of using this new technology in meat handling.

  18. Development of superconducting acceleration cavity technology for free electron lasers

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jong Min; Lee, Byung Cheol; Kim, Sun Kook; Jeong, Young Uk; Cho, Sung Oh

    2000-10-01

    As a result of the cooperative research between the KAERI and Peking University, the key technologies of superconducting acceleration cavity and photoelectron gun have been developed for the application to high power free electron lasers. A 1.5-GHz, 1-cell superconducting RF cavity has been designed and fabricated by using pure Nb sheets. The unloaded Q values of the fabricated superconducting cavity has been measured to be 2x10{sup 9} at 2.5K, and 8x10{sup 9} at 1.8K. The maximum acceleration gradient achieved was 12 MeV/m at 2.5K, and 20MV/m at 1.8 K. A cryostat for the 1-cell superconducting cavity has been designed. As a source of electron beam, a DC photocathode electron gun has been designed and fabricated, which is composed of a photocathode evaporation chamber and a 100-keV acceleration chamber. The efficiency of the Cs2Te photocathode is 3% nominally at room temperature, 10% at 290 deg C. The superconducting photoelectron gun system developed has been estimated to be a good source of high-brightness electron beam for high-power free electron lasers.

  19. Healthcare technology innovation adoption electronic health records and other emerging health information technology innovations

    CERN Document Server

    Daim, Tugrul U; Basoglu, Nuri; Kök, Orhun M; Hogaboam, Liliya

    2016-01-01

    This book aims to study the factors affecting the adoption and diffusion of Health Information Technology (HIT) innovation. It analyzes the adoption processes of various tools and applications, particularly Electronic Health Records (EHR), highlighting the impact on various sectors of the healthcare system, such as physicians, administration,  and patient care, while also identifying the various pitfalls and gaps in the literature. With the various challenges currently facing the United States healthcare system, the study, adoption and diffusion of healthcare technology innovation, particularly HIT, is imperative to achieving national goals. This book is organized into three sections. Section one reviews theories and applications for the diffusion of Health Care Technologies. Section two evaluates EHR technology, including the barriers and enables in adoption and alternative technologies. Finally, section three examines the factors impacting the adoption of EHR systems. This book will be a key source for stu...

  20. Technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecka, Iwona; Panas, Andrzej; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kozłowski, Roman; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecki, Maciej; Zaborowski, Michał

    2013-07-01

    The paper discusses the technology of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE). The developed technology enables the fabrication of both planar and epiplanar p+-ν-n+ detector structures with an active area of up to 50 cm2. The starting material for epiplanar structures are silicon wafers with a high-resistivity n-type epitaxial layer ( ν layer - ρ < 3 kΩcm) deposited on a highly doped n+-type substrate (ρ< 0,02Ωcm) developed and fabricated at the Institute of Electronic Materials Technology. Active layer thickness of the epiplanar detectors (νlayer) may range from 10 μm to 150 μm. Imported silicon with min. 5 kΩcm resistivity is used to fabricate planar detectors. Active layer thickness of the planar detectors (ν) layer) may range from 200 μm to 1 mm. This technology enables the fabrication of both discrete and multi-junction detectors (monolithic detector arrays), such as single-sided strip detectors (epiplanar and planar) and double-sided strip detectors (planar). Examples of process diagrams for fabrication of the epiplanar and planar detectors are presented in the paper, and selected technological processes are discussed.

  1. Implementing MEMS technology for soft, (bio)electronics interfaces

    Science.gov (United States)

    Romeo, Alessia; Hofmeister, Yannick; Lacour, Stéphanie P.

    2014-06-01

    Soft, bioelectronics interfaces are broadly defined as microfabricated devices with mechanical properties suited to comply with biological tissues. There are many challenges associated with the development of such technology platforms. Simultaneously one must achieve reliable electronic performance, thermal and environmental stability, mechanical compliance, and biocompatibility. Materials and system architecture must be designed such that mechanical integrity and electrical functionality is preserved during fabrication, implementation and use of the interface. Depositing and patterning conventional device materials, ranging from inorganic to organic thin films as well as nanomaterials, directly onto soft elastomeric substrates enable electronic devices with enhanced mechanical flexibility. Success in fabrication also relies on a careful design of the mechanical architecture of the soft interface to minimize mechanical stresses in the most fragile materials.

  2. The Next-Generation Power Electronics Technology for Smart Grids

    Science.gov (United States)

    Akagi, Hirofumi

    This paper presents an overview of the next-generation power electronics technology for the Japanese-version smart grid. It focuses on a grid-level battery energy storage system, a grid-level STATCOM (STATic synchronous COMpensator), and a 6.6-kV BTB (Back-To-Back) system for power flow control between two power distribution feeders. These power electronic devices play an important role in achieving load frequency control and voltage regulation. Their circuit configurations based on modular multilevel cascade PWM converters are characterized by flexible system design, low voltage steps, and low EMI (Electro-Magnetic Interference) emission. Their downscaled laboratory models are designed, constructed, and tested to verify the viability and effectiveness of the circuit configurations and control methods.

  3. Control system by the technological electron Linac KUT-20

    CERN Document Server

    Akchurin, Y I; Gurin, V A; Demidov, N V

    2001-01-01

    The high-power technological electron linac KUT-20 was developed at the Science Research Complex 'Accelerator' of NSC KIPT. The linac consists of two 1.2 m length accelerating structures with a variable geometry and an injector. The latter comprises a diode electron gun,a klystron type buncher and an accelerating cavity.With a RF supply power at accelerating structure entries of 11 MW and with a current at the accelerator exit of 1A,the beam energy will be up to 20 MeV.An average beam power is planned to be 20 kW.All systems of the accelerator are controlled by a computerised control system. The program and technical complex consist of PC equipped with fast ADC control console, synchronization unit, microprocessor-operated complexes.

  4. 39 CFR 255.4 - Accessibility to electronic and information technology.

    Science.gov (United States)

    2010-07-01

    ... AND INFORMATION TECHNOLOGY § 255.4 Accessibility to electronic and information technology. (a) In... burden, that the electronic and information technology the agency procures allows— (1) Individuals with... 39 Postal Service 1 2010-07-01 2010-07-01 false Accessibility to electronic and...

  5. 23 CFR 950.5 - Requirement to use electronic toll collection technology.

    Science.gov (United States)

    2010-04-01

    ... 23 Highways 1 2010-04-01 2010-04-01 false Requirement to use electronic toll collection technology... agency using electronic toll collection technology must develop and implement reasonable methods to... electronic toll collection technology must develop, implement, and make publicly available privacy...

  6. 25 CFR 502.7 - Electronic, computer or other technologic aid.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 2 2010-04-01 2010-04-01 false Electronic, computer or other technologic aid. 502.7... DEFINITIONS OF THIS CHAPTER § 502.7 Electronic, computer or other technologic aid. (a) Electronic, computer or other technologic aid means any machine or device that: (1) Assists a player or the playing of a...

  7. 16 CFR 6.152 - Program accessibility: Electronic and information technology.

    Science.gov (United States)

    2010-01-01

    ... information technology. 6.152 Section 6.152 Commercial Practices FEDERAL TRADE COMMISSION ORGANIZATION... information technology. (a) When developing, procuring, maintaining, or using electronic and information... electronic and information technology allows, regardless of the type of medium of the technology:...

  8. Cooperative Electronic Mail: Effective Communication Technology for Introductory Chemistry

    Science.gov (United States)

    Pence, Laura E.

    1999-05-01

    One drawback to using cooperative learning in the classroom is that it takes up class time and reduces the amount of content that can be covered during a semester. Cooperative electronic mail is an excellent alternate method of using cooperative learning that shifts the medium of interaction to the computer and encourages students to learn to communicate effectively through technology. In this project, three types of exercises were assigned, one prior to each exam. These three assignments were (i) an open-ended question, (ii) a traditional cooperative activity done electronically, and (iii) an exercise to allow students to write exam questions for each other. The average participation rate in the exercises was 90% over four semesters, which indicated that the project was an effective incentive to get students to use email regularly. The evaluations of the project were also extremely positive. One surprising result of the assessment was that female students gave even more favorable responses than men, suggesting that this project was an excellent way to encourage women to use computer technology.

  9. Superior Light-Harvesting Heteroleptic Ruthenium(II) Complexes with Electron-Donating Antennas for High Performance Dye-Sensitized Solar Cells.

    Science.gov (United States)

    Chen, Wang-Chao; Kong, Fan-Tai; Li, Zhao-Qian; Pan, Jia-Hong; Liu, Xue-Peng; Guo, Fu-Ling; Zhou, Li; Huang, Yang; Yu, Ting; Dai, Song-Yuan

    2016-08-03

    Three heteroleptic polypyridyl ruthenium complexes, RC-41, RC-42, and RC-43, with efficient electron-donating antennas in the ancillary ligands were designed, synthesized, and characterized as sensitizers for dye-sensitized solar cell. All the RC dye sensitizers showed remarkable light-harvesting capacity and broadened absorption range. Significantly, RC-43 obtained the lower energy metal-ligand charge transfer (MLCT) band peaked at 557 nm with a high molar extinction coefficient of 27 400 M(-1) cm(-1). In conjunction with TiO2 photoanode of submicrospheres and iodide-based electrolytes, the DSSCs sensitizing with the RC sensitizers, achieved impressively high short-circuit current density (19.04 mA cm(-2) for RC-41, 19.83 mA cm(-2) for RC-42, and 20.21 mA cm(-2) for RC-43) and power conversion efficiency (10.07% for RC-41, 10.52% for RC-42, and 10.78% for RC-43). The superior performances of RC dye sensitizers were attributed to the enhanced light-harvesting capacity and incident-photon-to-current efficiency (IPCE) caused by the introduction of electron-donating antennas in the ancillary ligands. The interfacial charge recombination/regeneration kinetics and electron lifetime were further evaluated by the electrochemical impedance spectroscopy (EIS) and transient absorption spectroscopy (TAS). These data decisively revealed the dependences on the photovoltaic performance of ruthenium sensitizers incorporating electron-donating antennas.

  10. Emerging Two-Phase Cooling Technologies for Power Electronic Inverters

    Energy Technology Data Exchange (ETDEWEB)

    Hsu, J.S.

    2005-08-17

    In order to meet the Department of Energy's (DOE's) FreedomCAR and Vehicle Technologies (FVCT) goals for volume, weight, efficiency, reliability, and cost, the cooling of the power electronic devices, traction motors, and generators is critical. Currently the power electronic devices, traction motors, and generators in a hybrid electric vehicle (HEV) are primarily cooled by water-ethylene glycol (WEG) mixture. The cooling fluid operates as a single-phase coolant as the liquid phase of the WEG does not change to its vapor phase during the cooling process. In these single-phase systems, two cooling loops of WEG produce a low temperature (around 70 C) cooling loop for the power electronics and motor/generator, and higher temperature loop (around 105 C) for the internal combustion engine. There is another coolant option currently available in automobiles. It is possible to use the transmission oil as a coolant. The oil temperature exists at approximately 85 C which can be utilized to cool the power electronic and electrical devices. Because heat flux is proportional to the temperature difference between the device's hot surface and the coolant, a device that can tolerate higher temperatures enables the device to be smaller while dissipating the same amount of heat. Presently, new silicon carbide (SiC) devices and high temperature direct current (dc)-link capacitors, such as Teflon capacitors, are available but at significantly higher costs. Higher junction temperature (175 C) silicon (Si) dies are gradually emerging in the market, which will eventually help to lower hardware costs for cooling. The development of high-temperature devices is not the only way to reduce device size. Two-phase cooling that utilizes the vaporization of the liquid to dissipate heat is expected to be a very effective cooling method. Among two-phase cooling methods, different technologies such as spray, jet impingement, pool boiling and submersion, etc. are being developed. The

  11. Transferability of ASTM/NIST alanine-polyethylene recipe at ISS. American Society for Testing and Materials/National Institute for Standards and Technology. Istituto Superiore de Sanita

    Science.gov (United States)

    De Angelis C; Fattibene; Onori; Petetti; Bartolotta; Sansone Santamaria A

    2000-05-01

    Alanine-polyethylene solid state dosimeters were prepared at Istituto Superiore di Sanita (ISS) following the recipe proposed by National Institute of Standards and Technology (NIST) with the goal of testing its transferability. Dosimeters were prepared using 95% alanine and 5% polyethylene, by weight. They are rugged and of increased sensitivity, repeatability and reproducibility as respect to the ISS alanine-paraffin pellets. Reproducibility of about 1% was obtained at 10 Gy and at 3 Gy if one single pellet or a stack of five dosimeters were used, respectively.

  12. Application of Electron Beam Surface Technologies in the Automotive Industry

    Institute of Scientific and Technical Information of China (English)

    Rolf Zenker; Anja Buchwalder

    2004-01-01

    Progress in the beam deflection technique opens up new possibilities for the application of electron beam (EB)surface and welding technologies in the automotive industry. This development is based on three-dimensional high-speed beam deflection and fully automatic online process control. So, in the EB surface treatment three-dimensional energy transfer fields can be realised which take into account the contour of a component, the conditions of heat conduction and the load conditions. High flexibility, precision and reproducibility are typical characteristics. High productivity is achieved by the simultaneous interaction of the EB in several processing areas or by carrying out several processes simultaneously. EB surface treatment is becoming more and more attractive and important especially in the automotive industry, and also in comparison to laser technologies. This paper deals with different EB surface technologies, for example hardening,remelting, surface alloying, dispersing or cladding of different materials such as steel, cast iron and different alloys of Al,Mg and Ti. Examples of applications in the automotive industry, especially engine components, will be discussed.

  13. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    Hard material technologies were surveyed to establish the hard electronic technology which offers superior characteristics under hard operational or environmental conditions as compared with conventional Si devices. The following technologies were separately surveyed: (1) The device and integration technologies of wide gap hard semiconductors such as SiC, diamond and nitride, (2) The technology of hard semiconductor devices for vacuum micro- electronics technology, and (3) The technology of hard new material devices for oxides. The formation technology of oxide thin films made remarkable progress after discovery of oxide superconductor materials, resulting in development of an atomic layer growth method and mist deposition method. This leading research is expected to solve such issues difficult to be easily realized by current Si technology as high-power, high-frequency and low-loss devices in power electronics, high temperature-proof and radiation-proof devices in ultimate electronics, and high-speed and dense- integrated devices in information electronics. 432 refs., 136 figs., 15 tabs.

  14. Industrial Applications of Electronic Nose Technology in the Textiles Industry

    Science.gov (United States)

    Gibson, Tim; Chandler, Rob; Hallam, Viv; Simpson, Claire; Bentham, Martin

    2009-05-01

    Electronic nose technology has been available commercially for over 12 years but uptake in actual industrial applications has yet to be fully realised. We report 2 specific test protocols being used in the textiles industry that allow the direct measurement of anti-odour and anti-microbial capabilities of fabrics. Results will be shown for the standard anti-odour test which was specifically commissioned by Courtaulds PLC and which is being used by a number of manufacturers. The second test, which measures the anti-microbial and the anti-odour capabilities of fabrics simultaneously was developed in 2008. Results will be shown that clearly indicate both parameters are detected and proofs of anti-microbial capabilities will be given. These 2 tests will for the first time, enable the fulfillment of legislation that states for textile product claims, anti-odour and anti-microbial capabilities of fabrics must be scientifically substantiated.

  15. As mediações tecnológicas no desenvolvimento das funções psicológicas superiores/The Technological mediations in the psychologies superiores functions development

    Directory of Open Access Journals (Sweden)

    Ana Maria Munhoz Fett

    2005-01-01

    Full Text Available O artigo apresenta uma pesquisa qualitativa, na modalidade de estudo de caso, que teve como objetivo analisar a utilização da tecnologia por meio do computador como instrumento mediador no desenvolvimento das funções psicológicas superiores, em um contexto psicopedagógico clínico. O caso é o de um menino de onze anos, com vários encaminhamentos a profissionais da saúde e os diagnósticos de dificuldades de aprendizagem e psicose infantil. Os dados foram coletados a partir de observações dos registros de treze atendimentos psicopedagógicos, nos quais o computador foi utilizado, e de entrevistas com a família. A análise dos dados se deu pelos seus conteúdos, caracterizados por unidades de representação significativas e homogêneas propostas por Bardin (1977. A partir das reflexões embasadas na Teoria Sociohistórica, chegou-se à conclusão de que as mediações do computador aliadas à mediação da psicopedagoga contribuíram no desenvolvimento das funções psicológicas superiores do sujeito dessa pesquisa, principalmente as de atenção, memória, emoção e linguagem. This article presents a qualitative research on a case study modality. Its objective was analyze the use of technology utilization using one microcomputer mediating instrument to develop the upper psychological functions in a clinical psycho pedagogic context. It’s an eleven years old boy case with several professionals health redirections vested with learning difficulties and infantile psychosis diagnostic. The data had been collected from thirteen psychos pedagogic sessions register observations, in which it was comprehended the microcomputer utilization and family interviews. The data analysis it was based in its contents characterized for significant and homogeneous representation units proposals for Bardin (1977. From the reflections based in the Socio historical theory, it was arrived the conclusion that the computer mediations allied to the psycho

  16. 21 CFR 1311.05 - Standards for technologies for electronic transmission of orders.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Standards for technologies for electronic... JUSTICE REQUIREMENTS FOR ELECTRONIC ORDERS AND PRESCRIPTIONS (Eff. 6-1-10) General § 1311.05 Standards for technologies for electronic transmission of orders. (a) A registrant or a person with power of attorney to...

  17. 48 CFR 352.239-73 - Electronic information and technology accessibility.

    Science.gov (United States)

    2010-10-01

    ... Clauses 352.239-73 Electronic information and technology accessibility. (a) As prescribed in 339.201-70(a), the Contracting Officer shall insert the following provision: Electronic and Information Technology... Board Electronic and Information (EIT) Accessibility Standards (36 CFR Part 1194), require that,...

  18. High-fidelity simulator technology may not be superior to traditional low-fidelity equipment for neonatal resuscitation training.

    Science.gov (United States)

    Finan, E; Bismilla, Z; Whyte, H E; Leblanc, V; McNamara, P J

    2012-04-01

    Despite completing accredited resuscitation training, neonatal trainees often feel unprepared to deal with real-life clinical emergencies. High-fidelity simulator (HFS) technology offers the potential of recreating a realistic stressful clinical environment to aid training and evaluation. To date, there are limited data examining the physiological impact of this training modality in comparison to less costly alternatives. The objective of this study was to compare the effects of low-fidelity simulator (LFS) versus HFS technology on performance levels, objective and subjective measures of stress in neonatal trainees. Sixteen neonatal fellows were invited to participate in a prospective randomized study. Subjects were divided into pairs and randomized to LFS or HFS for completion of scenario I. After an interval of 1 month, fellow teams crossed over to complete scenario II using the alternative simulator technology. Technical and non-technical skills were assessed using validated resuscitation scoring tools. Participants recorded subjective stress at sequential time points before and after each simulation. Buccal cortisol was measured at each corresponding time point and comparison between HFS and LFS groups was made. The mean overall resuscitation performance score was 75.8%±10, but there was no difference in performance between HFS and LFS groups. There was also no significant difference in non-technical skills performance between groups. Salivary cortisol increased over the duration of the simulated experience, but there were no differences between the two groups (P=0.001, two-way repeated measures analysis of variance). We also identified changes in subjective measures of stress (P<0.001, analysis of variance) over time, but again there were no differences between groups. Simulated neonatal resuscitations induce a significant stress response in neonatal trainees; however, we were unable to identify any difference in stress measures between HFS and LFS. These

  19. Teacher Perceptions of Electronic Portfolios as a Technology Integration Tool

    Science.gov (United States)

    Blackwell, John P., III.

    2013-01-01

    This qualitative case study explored the problem that teachers' attitudes and perceptions about technology often serve as barriers to successful technology integration in elementary school classrooms. Trends have showed that technology teachers directly responsible for teaching students technology skills are being laid off due to budget cuts…

  20. An AES Study of the Room Temperature Surface Conditioning of Technological Metal Surfaces by Electron Irradiation

    CERN Document Server

    Scheuerlein, C; Taborelli, M; Brown, A; Baker, M A

    2002-01-01

    The modifications to technological copper and niobium surfaces induced by 2.5 keV electron irradiation have been investigated in the context of the conditioning process occurring in particle accelerator ultra high vacuum systems. Changes in the elemental surface composition have been found using Scanning Auger Microscopy (SAM) by monitoring the carbon, oxygen and metal Auger peak intensities as a function of electron irradiation in the dose range 10-6 to 10-2 C mm-2. The surface analysis results are compared with electron dose dependent secondary electron and electron stimulated desorption yield measurements. Initially the electron irradiation causes a surface cleaning through electron stimulated desorption, in particular of hydrogen. During this period both the electron stimulated desorption and secondary electron yield decrease as a function of electron dose. When the electron dose exceeds 10-4 C mm-2 electron stimulated desorption yields are reduced by several orders of magnitude and the electron beam indu...

  1. Packaging Technologies for High Temperature Electronics and Sensors

    Science.gov (United States)

    Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

    2013-01-01

    This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

  2. New Electronic Technology Applied in Flexible Organic Optical System

    Directory of Open Access Journals (Sweden)

    Andre F. S. Guedes

    2014-02-01

    Full Text Available The synthesis and application of new organic materials, nanostructured, for developing technology based on organic devices, have been the main focus of the scientific community. In recent years, the first polymeric electronics products have entered the market (organic semiconductor materials and there are some electrochromic devices among them that have been called smart windows, once they control the passage of light or heat through a closed environment as an ordinary window. The main functional aspect of electrochromic devices, when being used in architectural and automotive industry, is to control the passage of light and temperature with thermal and visual comfort. These devices can be flexible and very thin, not containing heavy metals, and formed by layers of organic material deposited in several architectures. In this study, the electro-deposition of organic materials in the Polyaniline, PANI case, which provide stability in optical and electrical parameters, was utilized with the means of developing prototypes of organic electrochromic devices. These materials were characterized by: ultraviolet-visible spectroscopy absorption (UV-Vis, measurement of thickness (MT and electrical measurements (EM. This study aims to establish the relationship between the thickness of the active layer and the value of the electrical resistivity of the layer deposited through an electro-deposition technique. The experimental results enabled the equating of the electrical resistivity related to the thickness of the deposited layer. The linear fit of these results has expressed the thickness of the conducting layer, α, and the lowest value of the electrical resistivity, β, associated with the gap between the valence band and the conduction band. Thus, the results have demonstrated that, when the layer of organic material is completely conductive, we may obtain the thickness of the organic material deposited on the substrate.

  3. ELECTRONIC VOTING AS A FORM OF THE ELECTORAL INFORMATION AND COMMUNICATION TECHNOLOGIES: FOREIGN AND DOMESTIC EXPERIENCE

    OpenAIRE

    2015-01-01

    Electronic voting is considered in the context of information and communication technologies used during the electoral process. The foreign experience in implementing the e-voting technologies and prospects of its borrowings for use in Ukraine is analized. The basic advantages and disadvantages of electronic voting is underlined.

  4. EDITORIAL ELECTRONIC JOURNAL WITH OPEN ACCESS: A TECHNOLOGICAL LEAP

    Directory of Open Access Journals (Sweden)

    Julián Alberto Herrera

    2010-09-01

    Full Text Available The Faculty of Health at Universidad del Valle determined the conformation, functions, and competencies of the Scientific and Editorial Committees of the Colombia Médica journal (Resolution 099, July 07, 2009 HCF, permitting the naming of the Committees for the Journal and the opening of the internal call to name the Editor-in-Chief and the Associate Editors. Internal regulations institutionally define the types of publications of greatest interest, the frequency of each publication, and types of articles in regular and supplementary numbers, internal operations aspects; define stimuli for excellence in articles published with an award and editorial sanctions for plagiarism of intellectual property and redundant publication. In 1995, Colombia Médica adopted the web publication, now in 2010, fifteen years later, we have adopted we have adopted an agile and secure electronic management and publication system with open access that will permit editors, peers, and authors to work together from anywhere in the world, it will allow greater efficiency in real time with significant reduction of administrative costs. This system is currently used by 235 journals in the world, achieving more expeditious indexation of their articles, which is attractive for local researchers and for the international scientific community. For our Journal, this open electronic system is a true technological leap. The visibility of Colombia Médica has been traditionally good, given that it is indexed in 23 international data bases including the Institute for Scientific Information-ISI Thomson web of knowledge, and because it is a free journal that is easily accessed via the web. International Observatories have reported an increase in the number of downloads of complete articles by three times in the last year, which we feel is correlated to the four-fold increase of complete articles published in English. These facts, along with growing publication requests by authors

  5. EDITORIAL ELECTRONIC JOURNAL WITH OPEN ACCESS: A TECHNOLOGICAL LEAP

    Directory of Open Access Journals (Sweden)

    JULIAN ALBERTO HERRERA

    2010-03-01

    Full Text Available The Faculty of Health at Universidad del Valle determined the conformation, functions, and competencies of the Scientific and Editorial Committees of the Colombia Médica journal (Resolution 099, July 07, 2009 HCF, permitting the naming of the Committees for the Journal and the opening of the internal call to name the Editor-in-Chief and the Associate Editors. Internal regulations institutionally define the types of publications of greatest interest, the frequency of each publication, and types of articles in regular and supplementary numbers, internal operations aspects; define stimuli for excellence in articles published with an award and editorial sanctions for plagiarism of intellectual property and redundant publication.In 1995, Colombia Médica adopted the web publication, now in 2010, fifteen years later, we have adopted we have adopted an agile and secure electronic management and publication system with open access that will permit editors, peers, and authors to work together from anywhere in the world, it will allow greater efficiency in real time with significant reduction of administrative costs. This system is currently used by 235 journals in the world, achieving more expeditious indexation of their articles, which is attractive for local researchers and for the international scientific community. For our Journal, this open electronic system is a true technological leap.The visibility of Colombia Médica has been traditionally good, given that it is indexed in 23 international data bases including the Institute for Scientific Information-ISI Thomson web of knowledge, and because it is a free journal that is easily accessed via the web. International Observatories have reported an increase in the number of downloads of complete articles by three times in the last year, which we feel is correlated to the four-fold increase of complete articles published in English. These facts, along with growing publication requests by authors from

  6. Research on Supporting Functions of the Information Technology on Electronic medical record

    Directory of Open Access Journals (Sweden)

    Hu Sheng Li

    2016-01-01

    Full Text Available Objective: Promote further utilization of information technology in quality control of the electronic medical record and provide forceful technological supports for medical quality control. Method: research existing problems in quality control of electronic medical record at present, put forward that the information technology should be used sufficiently, integration with other systems should be completed, quality control rules should be built and quality control time should be set and finally point out the key construction element of information technology to provide supports. Result: the article points out that further utilization of information technology in quality control of EMR should start from the standard, structuralized and paperless electronic medical record, construction of the communication platform and application of high technology. Conclusion: it is of great significance to promote improvement of quality control level of the electronic medical record and improve continuously medical quality.

  7. International Conference on Emerging Research in Electronics, Computer Science and Technology

    CERN Document Server

    Sheshadri, Holalu; Padma, M

    2014-01-01

    PES College of Engineering is organizing an International Conference on Emerging Research in Electronics, Computer Science and Technology (ICERECT-12) in Mandya and merging the event with Golden Jubilee of the Institute. The Proceedings of the Conference presents high quality, peer reviewed articles from the field of Electronics, Computer Science and Technology. The book is a compilation of research papers from the cutting-edge technologies and it is targeted towards the scientific community actively involved in research activities.

  8. Electronic Teaching Portfolios: Technology Skills + Portfolio Development--Do They = Powerful Preservice Teachers?

    Science.gov (United States)

    Capraro, Mary Margaret

    2006-01-01

    Electronic portfolios are a "collection of work captured by electronic means, that serves as an exhibit of individual efforts, progress, and achievements in one or more areas" (Weidmer, 1998, p. 586). Because of the rapid growth and updates in technology, keeping electronic portfolios is becoming increasingly common in a variety of educational…

  9. USMC Electronic Warfare 2025: Trading Expertise for Advanced Technology

    Science.gov (United States)

    2011-04-15

    airborne electronic warlare during the transition period away from legacy equipment. EA-6B pilots and Electroilic Countermeasures Officers ( ECMOs ...Electronic Warfare (EW) capability. As an EA-6B Electronic Countenneasures Officer ( ECMO ), I anticipate that both the United States Marine Corps and all... ECMOs . An increased workload for Radio Battalion will have the same effect that the assumption of an additional function of Marine aviation will have on

  10. Integration of electronic nose technology with spirometry: validation of a new approach for exhaled breath analysis

    NARCIS (Netherlands)

    de Vries, R.; Brinkman, P.; van der Schee, M.P.; Fens, N.; Dijkers, E.; Bootsma, S.K.; de Jongh, Franciscus H.C.; Sterk, P.J.

    2015-01-01

    New 'omics'-technologies have the potential to better define airway disease in terms of pathophysiological and clinical phenotyping. The integration of electronic nose (eNose) technology with existing diagnostic tests, such as routine spirometry, can bring this technology to 'point-of-care'. We

  11. Packaging Technology for SiC High Temperature Electronics

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Spry, David J.; Meredith, Roger D.; Nakley, Leah M.; Beheim, Glenn M.; Hunter, Gary W.

    2017-01-01

    High-temperature environment operable sensors and electronics are required for long-term exploration of Venus and distributed control of next generation aeronautical engines. Various silicon carbide (SiC) high temperature sensors, actuators, and electronics have been demonstrated at and above 500 C. A compatible packaging system is essential for long-term testing and application of high temperature electronics and sensors in relevant environments. This talk will discuss a ceramic packaging system developed for high temperature electronics, and related testing results of SiC integrated circuits at 500 C facilitated by this high temperature packaging system, including the most recent progress.

  12. The Challenge of Technological Superiority

    Science.gov (United States)

    2015-08-01

    smaller and leaner force structure. The DoD has employed such “offset strategies” in the past to compensate for other challenges to national security. Our...LRRDPP.html). So far, more than 300 “ideas” have been submitted. Emerging themes surround the use of autonomy , range and quantities at cost (the

  13. High Power Electronics - Key Technology for Wind Turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke

    2014-01-01

    reliability challenges for the future wind turbines are explained. It is concluded that the wind turbine behavior/performance can be significantly improved by introducing power electronics, and there will be higher requirements for the power electronics performances in wind power application....

  14. High Power Electronics - Key Technology for Wind Turbines

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Ma, Ke

    2014-01-01

    reliability challenges for the future wind turbines are explained. It is concluded that the wind turbine behavior/performance can be significantly improved by introducing power electronics, and there will be higher requirements for the power electronics performances in wind power application....

  15. Concerned Technology 1989: Electronic Aids for People with Special Needs.

    Science.gov (United States)

    Sandhu, Jim Singh; Richardson, Steve

    In light of the implementation of Section 508 of the Rehabilitation Amendments Act of 1986 requiring that all electronic equipment purchased by the U.S. Government be accesible to the handicapped. this directory lists several hundred electronic aids for the disabled. The introduction humorously reviews the state of the art in software, artificial…

  16. Technology transfer present and futures in the electronic arts

    Directory of Open Access Journals (Sweden)

    Brian Degger

    2008-01-01

    Full Text Available We are entering an era where creating the fantastical is possible in the arts. In the areas of mixed reality and biological arts, responsive works are created based on advances in basic science and technology. This is enabling scientists and artists to pose new questions. As the time between discovery and application is so short, artists need imaginative ways of accessing new technology in order to critique and use it.These are the new paints that the majority of artists cannot afford or access, technology to enable cloning of DNA, to print channels on a chip, to access proprietary 3G networks. Currently, partnerships or residencies are used to facilitate artist’s access to these technologies. What would they do if technology was available that enabled them to make any art work they so desire? Are the limitations in current technology an advantage rather than a disadvantage in some of their works? Does interaction with technologists make their work more robust? Are there disadvantages? How do they get access to the technology they require? Open source or proprietary? Or have they encountered the situation where their vision is greater than technology allows. When their work breaks because of this fact, is their art broken? Blast Theory (Brighton,UK, FoAM(Brussels, Belgium and Amsterdam, Netherlands, SymbioticA (Perth, Australia are organisations pushing technological boundaries in the service of art. This paper addresses some questions of technology transfer in relation to recent artworks, particularly I like Frank in Adelaide (Blast Theory, transient reality generators (trg (FoAM and Multi electrode array artist (MeART (SymbioticA.

  17. Handbook of polymer coatings for electronics chemistry, technology and applications

    CERN Document Server

    Licari, James J

    1990-01-01

    This completely revised edition remains the only comprehensive treatise on polymer coatings for electronics. Since the original edition, the applications of coatings for the environmental protection of electronic systems have greatly increased, largely driven by the competitive need to reduce costs, weight and volume. The demands for high-speed circuits for the rapid processing of signals and data, high-density circuits for the storage and retrieval of megabits of memory, and the improved reliability required of electronics for guiding and controlling weapons and space vehicles have triggered

  18. Adhesives technology for electronic applications materials, processing, reliability

    CERN Document Server

    Licari, James J

    2011-01-01

    Adhesives are widely used in the manufacture and assembly of electronic circuits and products. Generally, electronics design engineers and manufacturing engineers are not well versed in adhesives, while adhesion chemists have a limited knowledge of electronics. This book bridges these knowledge gaps and is useful to both groups. The book includes chapters covering types of adhesive, the chemistry on which they are based, and their properties, applications, processes, specifications, and reliability. Coverage of toxicity, environmental impacts and the regulatory framework make this book par

  19. New Possibilities of Power Electronic Structures Using SiC Technology

    OpenAIRE

    2006-01-01

    This paper is dedicated to the recent unprecedented boom of SiC electronic technology. The contribution deals with brief survey of those properties. In particular, the differences (both good and bad) between SiC electronics technology and well-known silicon VLSI technology are highlighted. Projected performance benefits of SiC electronics are given for several large-scale applications on the end of the contribution. The basic properties of SiC material have been discussed already on the begin...

  20. Application of electron beam technology in improving sewage water ...

    African Journals Online (AJOL)

    user

    (electron beam) treatment of the wastewater was found to be very effective in reducing ... The experimental results elucidated that the reduction of biological oxygen ... can find its application either in agriculture for irrigation or in industry sector.

  1. The development of technology for recycling of electronic scrap

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Hyo-Shin; Kim, Won-Baek; Sohn, Yong-Uhn [Korea Institute of Geology Mining and Materials, Taejon (KR)] (and others)

    1999-12-01

    Electronic devices, especially computer becomes an essential tools for home and industries entering the information era. The number of computers exceed over 100 million, hence, the amount of end of life(EOL) computer and electronic scrap is increasing. These wastes and scraps include products rejected from manufacturing processes and obstacle computers. Owing to a short life cycle of electronic products and rapid growth of electronic industries, the number of domestic EOL computers goes beyond a million and its disposal causes an environmental problems. Therefore, this recycling is considered to play an important role from the viewpoint of environmental preservation as well as reusable resources. The process development for the recovery of valuable materials and minimization of waste from electronic scrap has been carried out. In the first year of three year project, physical separation such as shredding, crushing, and magnetic separation is established to reclaim valuable materials effectively. Then, hydro- and pyrometallurgical processes are employed to recover valuable metals from electronic scrap. First, metallic and nonmetallic portion are separated from PCBs by a newly designed shredder to prevent hazardous organic materials from further chemical treatment. The optimum conditions for each unit process were found in terms of separation ratio, energy consumption, recovery rate, etc. (author). 92 refs., 24 tabs., 39 figs.

  2. Electronic aroma detection technology for forensic and law enforcement applications

    Energy Technology Data Exchange (ETDEWEB)

    Barshick, S.-A.; Griest, W.H.; Vass, A.A.

    1996-12-31

    A major problem hindering criminal investigations is the lack of appropriate tools for proper crime scene investigations. Often locating important pieces of evidence means relying on the ability of trained detection canines. Development of analytical technology to uncover and analyze evidence, potentially at the scene, could serve to expedite criminal investigations, searches, and court proceedings. To address this problem, a new technology based on gas sensor arrays was investigated for its applicability to forensic and law enforcement problems. The technology employs an array of sensors that respond to volatile chemical components yielding a characteristic `fingerprint` pattern representative of the vapor- phase composition of a sample. Sample aromas can be analyzed and identified using artificial neural networks that are trained on known aroma patterns. Several candidate applications based on known technological needs of the forensic and law enforcement communities have been investigated. These applications have included the detection of aromas emanating from cadavers to aid in determining time since death, drug detection for deterring the manufacture, sale, and use of drugs of abuse, and the analysis of fire debris for accelerant identification. The results to date for these applications have been extremely promising and demonstrate the potential applicability of this technology for forensic use.

  3. Electronic aroma detection technology for forensic and law enforcement applications

    Science.gov (United States)

    Barshick, Stacy-Ann; Griest, Wayne H.; Vass, Arpad A.

    1997-02-01

    A major problem hindering criminal investigations is the lack of appropriate tools for proper crime scene investigations. Often locating important pieces of evidence means relying on the ability of trained detection canines. Development of analytical technology to uncover and analyze evidence, potentially at the scene, could serve to expedite criminal investigations, searches, and court proceedings. To address this problem, a new technology based on gas sensor arrays was investigated for its applicability to forensic and law enforcement problems. The technology employs an array of sensors that respond to volatile chemical components yielding a characteristic 'fingerprint' pattern representative of the vapor-phase composition of a sample. Sample aromas can be analyzed and identified using artificial neural networks that are trained on known aroma patterns. Several candidate applications based on known technological needs of the forensic and law enforcement communities have been investigated. These applications have included the detection of aromas emanating from cadavers to aid in determining time since death, drug detection for deterring the manufacture, sale, and use of drugs of abuse, and the analysis of fire debris for accelerant identification. The result to date for these applications have been extremely promising and demonstrate the potential applicability of this technology for forensic use.

  4. A primer for accessing and using electronic communications technology.

    Science.gov (United States)

    1996-01-01

    This supplement to "The Family Planning Manager" provides basic information for program managers on the equipment, training, and financial resources required to use electronic communications. Boxed sections compare the costs and services of selected communications providers in various countries and present detailed instructions on how to request a document by e-mail. The type of software selected--shell account, store-and-forward connection, or Serial Line Internet Protocol--depends on the type of connection with the communications provider. Among the issues to consider in assessing providers are service costs, telephone charges, equipment costs, modem speed, software, service support, and reputation for good service. Setting up, maintaining, and using electronic communications present new management challenges, especially in terms of providing adequate technical support, training, and funding. The supplement concludes with a glossary of terms commonly used in electronic communications.

  5. Electronic commerce: wiring the coal industry for new data technology

    Energy Technology Data Exchange (ETDEWEB)

    Carter, R.A.

    1998-07-01

    Industry pundits predict that coal by wire may some day replace much of the industry`s long-distance shipping requirements and their attendant costs, but data by wire, also known as electronic commerce (EC) can today offer coal producers and customers the means to gather and send large volumes of data cheaply and quickly. EC`s major components - electronic data interchange (EDI), bar-coding, smart codes, radio frequency `D`, and the internet - can reduce costs in equipment-intensive industries such as mining. The US National Mining Association sponsored a forum to discuss these alternatives at its 1998 Electronic Commerce Summit held in Tuscon, Arizona, 18-20 May. A report is given of discussions at the forum and contacts are given for sources of EDI information.

  6. Simulation Tools for Power Electronics Courses Based on Java Technologies

    Science.gov (United States)

    Canesin, Carlos A.; Goncalves, Flavio A. S.; Sampaio, Leonardo P.

    2010-01-01

    This paper presents interactive power electronics educational tools. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulating steady-state ideal rectifiers (uncontrolled and controlled; single-phase and three-phase). Additionally, this paper discusses the development and use of…

  7. Size Control Technology of Silver Nanoparticles Using Electron Beam Irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Kang, Hyun Suk; Kim, Byungnam; Kim, Hye Won; Koo, Yong Hwan; Lee, Byung Cheol [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Park, Ji Hyun [Univ. of Science and Technology, Daejeon (Korea, Republic of); Bae, Hyung Bin [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Park, Changmoon [Chungnam National Univ., Daejeon (Korea, Republic of)

    2013-12-15

    The manufacturing of silver nanoparticles using an electron beam is easy, fast, and highly productive, and it is possible at room temperature with no chemical residuals. Its various advantages therefore make this an important method for manufacturing nanoparticles such as silver, copper, and platinum. In particular, despite the use of electron beam irradiation, the results show that this method makes it possible to produce silver nanoparticles at low cost since low beam energy and low doses are used. This means that middle and high-energy electron beam accelerators are very expensive, but a low-energy electron beam accelerator has a relatively low cost of around 4-5 times, and mass production for a flow reaction without the need for extra radiation shielding is possible. Silver nanoparticles are of great interest to many researchers owing to their ability to be used in many applications such as catalysis, nanoelectronics, optical filters, electromagnetic interference shielding, surface Raman scattering, medical supplies, fabrics, cosmetics, hygiene and kitchen supplies, and electric home appliances.

  8. Simulation Tools for Power Electronics Courses Based on Java Technologies

    Science.gov (United States)

    Canesin, Carlos A.; Goncalves, Flavio A. S.; Sampaio, Leonardo P.

    2010-01-01

    This paper presents interactive power electronics educational tools. These interactive tools make use of the benefits of Java language to provide a dynamic and interactive approach to simulating steady-state ideal rectifiers (uncontrolled and controlled; single-phase and three-phase). Additionally, this paper discusses the development and use of…

  9. Application of Nonlocal Electron Kinetics to Plasma Technologies

    Science.gov (United States)

    Kaganovich, Igor D.

    2011-10-01

    Partially ionized plasmas are typically in a highly non-equilibrium thermodynamic state: the electrons are not in equilibrium with the neutral particle species or the ions, and the electrons are also not in equilibrium within their own ensemble, which results in a significant departure of the electron velocity distribution function (EVDF) from a Maxwellian. These non-equilibrium conditions provide considerable freedom to choose optimal plasma parameters for applications, which make gas-discharge plasmas remarkable tools for a variety of plasma applications, including plasma processing, discharge lighting, plasma propulsion, particle beam sources, and nanotechnology. Significant progress in understanding the formation of non-Maxwellian EVDF in the self-consistent electric fields has been one of the major achievements in the low-temperature plasmas during the last decade. This progress was made possible by a synergy between full-scale particle-in-cell simulations, analytical models, and experiments. Specific examples include rf discharges, dc discharges with auxiliary electrodes, Hall thruster discharges. In each example, nonlocal kinetic effects are identified as the main mechanisms responsible for the surprising degree of discharge self-organization. These phenomena include: explosive generation of cold electrons with rf power increase in low-pressure rf discharges; abrupt changes in discharge structure with increased bias voltage on a third electrode in a dc discharge with hot cathode; absence of a steady-state regime in Hall thruster discharges with intense secondary electron emission due to coupling of the sheath properties and the EVDF. In collaboration with Y. Raitses, A.V. Khrabrov, M. Campanell, V. I. Demidov, D. Sydorenko, I. Schweigert, and A. S. Mustafaev. Research supported by the U.S. Department of Energy.

  10. Electronic Commerce: Canadian Community Colleges and Institutes of Technology.

    Science.gov (United States)

    Association of Canadian Community Colleges.

    This paper reports on the Canadian college system's collaboration with industry and community services in the development and delivery of non-credit e-commerce courses offered through continuing education departments at community colleges and institutes of technology. The paper argues that, in today's changing economy, the accelerated need for…

  11. High power electron and ion beam research and technology

    Energy Technology Data Exchange (ETDEWEB)

    Nation, J.A.; Sudan, R.N. (eds.)

    1977-01-01

    Topics covered in volume II include: collective accelerators; microwaves and unneutralized E-beams; technology of high-current E-beam accelerators and laser applications of charged-particle beams. Abstracts of twenty-nine papers from the conference were prepared for the data base in addition to six which appeared previously. (GHT)

  12. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  13. Project-Based Learning in Electronic Technology: A Case Study

    Science.gov (United States)

    Li, Li

    2015-01-01

    A case study of project-based learning (PBL) implemented in Tianjin University of Technology and Education is presented. This multidiscipline project is innovated to meet the novel requirements of industry while keeping its traditional effectiveness in driving students to apply knowledge to practice and problem-solving. The implementation of PBL…

  14. Creating pure nanostructures from electron-beam-induced deposition using purification techniques: a technology perspective

    NARCIS (Netherlands)

    Botman, A.; Mulders, J.J.L.; Hagen, C.W.

    2009-01-01

    The creation of functional nanostructures by electron-beam-induced deposition (EBID) is becoming more widespread. The benefits of the technology include fast ‘point-and-shoot’ creation of three-dimensional nanostructures at predefined locations directly within a scanning electron microscope. One sig

  15. DEMONSTRATION BULLETIN: HIGH VOLTAGE ELECTRON BEAM TECHNOLOGY - HIGH VOLTAGE ENVIRONMENTAL APPLICATIONS, INC.

    Science.gov (United States)

    The high energy electron beam irradiation technology is a low temperature method for destroying complex mixtures of hazardous organic chemicals in solutions containing solids. The system consists of a computer-automated, portable electron beam accelerator and a delivery system. T...

  16. European Power Electronic conference in Aalborg, Denmark - 1000 participants discussing the future energy technologies

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Munk-Nielsen, Stig

    2007-01-01

    The European Power Electronics and Adjustable Speed Drives conference with technical sponsorship of IEEE Industrial Electronic Society has been held in Aalborg, Denmark, during the first days of September 2007 with an overwhelming success and participation. It was hosted by Aalborg University......'s Institute of Energy Technology....

  17. Advanced methods for teaching electronic-nose technologies to diagnosticians and clinical laboratory technicians

    Science.gov (United States)

    Alphus D. Wilson

    2012-01-01

    Electronic-detection technologies and instruments increasingly are being utilized in the biomedical field to perform a wide variety of clinical operations and laboratory analyses to facilitate the delivery of health care to patients. The introduction of improved electronic instruments for diagnosing diseases and for administering treatments has required new training of...

  18. Electron Emitter for small-size Electrodynamic Space Tether using MEMS Technology

    DEFF Research Database (Denmark)

    Fleron, René A. W.; Blanke, Mogens

    2004-01-01

    system with focus on electron emitter design and manufacture using micro-electro-mechanical- system (MEMS) technology. The paper addresses the system concepts of a small size electrodynamic tether mission and shows a novel electron emitter for the 1-2 mA range where altitude can be effectively affected...

  19. Linking emerging hazardous waste technologies with the electronic information era

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, B.E.; Suk, W.A. [National Institute of Environmental Health Sciences, Research Triangle Park, NC (United States); Blackard, B. [Technology Planning and Management Corp., Durham, NC (United States)

    1996-12-31

    In looking to the future and the development of new approaches or strategies for managing hazardous waste, it is important to understand and appreciate the factors that have contributed to current successful approaches. In the United States, several events in the last two decades have had a significant impact in advancing remediation of hazardous waste, including environmental legislation, legislative reforms on licensing federally funded research, and electronic transfer of information. Similar activities also have occurred on a global level. While each of these areas is significant, the electronic exchange of information has no national boundaries and has become an active part of major hazardous waste research and management programs. It is important to realize that any group or society that is developing a comprehensive program in hazardous waste management should be able to take advantage of this advanced approach in the dissemination of information. 6 refs., 1 tab.

  20. Fundamental Research on Convective Heat Transfer in Electronic Cooling Technology

    Institute of Scientific and Technical Information of China (English)

    C.F.Ma; Y.P.Gan; 等

    1992-01-01

    During the past six years comprehensive research programs have been conducted at the Beijing Polytechnic University to provide a better understanding of heat transfer characteristics of existing and condidate cooling techniques for electronic and microelestanding of heat transfer characteristics of existing and condidate cooling techniques for electronic and microleectronic devices.This paper provides a review and summary of the programs with emphasis on direct liquid cooling.Included in this review are the heat transfer investigations related to the following cooling modes:liquid free,mixed and forced convection.liquid jet impingement,flowing liquid film cooling,pool boiling,spray cooling,foreign gas jet impingement in liquid pool,and forced convection air-cooling.

  1. A decision technology system for health care electronic commerce.

    Science.gov (United States)

    Forgionne, G A; Gangopadhyay, A; Klein, J A; Eckhardt, R

    1999-08-01

    Mounting costs have escalated the pressure on health care providers and payers to improve decision making and control expenses. Transactions to form the needed decision data will routinely flow, often electronically, between the affected parties. Conventional health care information systems facilitate flow, process transactions, and generate useful decision information. Typically, such support is offered through a series of stand-alone systems that lose much useful decision knowledge and wisdom during health care electronic commerce (e-commerce). Integrating the stand-alone functions can enhance the quality and efficiency of the segmented support, create synergistic effects, and augment decision-making performance and value for both providers and payers. This article presents an information system that can provide complete and integrated support for e-commerce-based health care decision making. The article describes health care e-commerce, presents the system, examines the system's potential use and benefits, and draws implications for health care management and practice.

  2. JPRS Report, Science & Technology, USSR: Electronics & Electrical Engineering.

    Science.gov (United States)

    2007-11-02

    Parameters of Solar System Power Supply for the Cuban Environment fIZVESTIYA VYSSHIKH UCHEBNYKH ZAVEDENII: ENERGETIKA No 4, Apr 87] 29 Correlation...Sedov; ELEKTROSVYAZ, Oct 87] 41 5^AYS 8 ~ 003 7 USSR: Electronics & Electrical Engineering Sonics, Ultrasonics Matching Interdigital ...in the cells of the periodic structure makes it possible to approximate the directional pattern of the output radiation. Results showed that in a

  3. Android and PSoC Technology Applied to Electronic Tongue Development

    OpenAIRE

    2015-01-01

    Nowadays, in the food industry, analyzing the quality of alimentary products has become a necessity. As a result, producers have been searching for new accurate methods to analyze food quality. The development of bio-inspired devices (electronic nose and electronic tongue) is a potential alternative to supply this need. The current project shows the development of a prototype circuit based on PSoC technology, which is used as a signal processing stage in an electronic tongue device with the a...

  4. Overview of European technology in computers, telecommunications, and electronics

    Science.gov (United States)

    Blackburn, J. F.

    1990-05-01

    The emergence of the personal computer, the growing use of distributed systems, and the increasing demand for supercomputers and mini-supercomputers are causing a profound impact on the European computer market. An equally profound development in telecommunications is the integration of voice, data, and images in the public network systems - the Integrated Service Digital Network (ISDN). The programs being mounted in Europe to meet the challenges of these technologies are described. The Europe-wide trends and actions with respect to computers, telecommunications, and microelectronics are discussed, and the major European collaborative programs in these fields are described. Specific attention is given to the European Strategic Programme for Research and Development in Information (ESPRIT); Research in Advanced Communications for Europe (RACE); European Research Coordination Agency (Eureka) programs; Joint European Submicron Silicon Initiative (JESSI); and the recently combined programs Basic Research Industrial Technologies in Europe/European Research in Advanced Materials (BRITE/EURAM).

  5. Understanding Dynamic Competitive Technology Diffusion in Electronic Markets

    Science.gov (United States)

    Zhang, Cheng; Song, Peijian; Xu, Yunjie; Xue, Ling

    The extant literature on information technology (IT) diffusion has largely treated technology diffusion as a generic and independent process. This study, in contrast, examines the diffusion of different IT products with brand differentiation and competition. Drawing upon existing theories of product diffusion, we propose a research model to capture the dynamics of the competitive diffusion of web-based IT products and validate it with longitudinal field data of e-business platforms. Our findings suggest that IT product diffusion can be better predicted by a competitive model than by an independent-diffusion-process model. This research extends IT research to the context of competitive diffusion and provides practitioners an effective model to predict the dissemination of their products. The research also suggests the existence of asymmetric interactions among competing products, prompting scholars and practitioners to pay attention to the influence of competing products when making forecast of their product market.

  6. Improved Oral Bioavailability of Lacidipine Using Nanosuspension Technology: Inferior in vitro Dissolution and Superior in vivo Drug Absorption versus Lacipil®.

    Science.gov (United States)

    Zhao, Juanhang; Luo, Lei; Fu, Qiang; Guo, Bei; Li, Yun; Geng, Yajie; Wang, Junfeng; Zhang, Tianhong

    2016-01-01

    Improved dissolution is a better way of increasing the oral absorption of lacidipine (LCDP) because it is a BCS II class drug. The purpose of this study is to improve the oral bioavailability of LCDP by applying nanosuspension technology. LCDP nanosuspensions were prepared by a hybrid method of microprecipitation and high pressure homogenization. The effects of the production parameters (shearing rate and time, the stabilizers and their concentrations, homogenization pressure and number of cycles) were investigated to optimize the preparation process. In vitro characterizations (X-ray powder diffraction, differential scanning calorimetry, scanning electron microscopy and dissolution measurement) were carried out and an oral pharmacokinetic study was performed in beagle dogs. LCDP was transformed into an amorphous state during the preparation process, and the mean particle size was about 714.0 ± 12.7 nm. The dissolution rate of LCDP nanosuspensions was faster than that of physical mixtures, but slower than that of Lacipil® (the commercial tablet). Regarding the in vivo pharmacokinetics, the key pharmacokinetic parameters (Cmax and AUC0-∞) of the nanosuspensions were statistically significantly higher than those of both the commercial tablet and physical mixtures. So, this is an efficient drug delivery strategy to facilitate the oral administration of LCDP by using nanosuspension technology, and should be generally applicable to many poorly water-soluble drugs with dissolution rate-limited absorption.

  7. Large space systems technology electronics: Data and power distribution

    Science.gov (United States)

    Dunbar, W. G.

    1980-01-01

    The development of hardware technology and manufacturing techniques required to meet space platform and antenna system needs in the 1980s is discussed. Preliminary designs for manned and automatically assembled space power system cables, connectors, and grounding and bonding materials and techniques are reviewed. Connector concepts, grounding design requirements, and bonding requirements are discussed. The problem of particulate debris contamination for large structure spacecraft is addressed.

  8. Emerging Power/Energy Technologies for Portable Electronics for SOCOM

    Science.gov (United States)

    2008-02-29

    missions at 20 W. An improved battery, the BA5390 UHC , will become available in 2008. It will provide about 40% more endurance at 20 W over 72 h, and...battery technology improves, such as in the case of the BA5390 UHC batteries, they will compete with proposed fuel cell and other fuel conversion...and new BA5390 UHC batteries (Windermere Study

  9. Scenarios to explore the futures of the emerging technology of organic and large area electronics

    OpenAIRE

    Parandian, Alireza; Rip, Arie

    2013-01-01

    Emerging technologies pose challenges for futures research because of their uncertainties combined with promises. Actors are anticipating and acting strategically. Sociotechnical scenarios building on endogenous futures support and enlighten actors. Such scenarios contribute to “strategic intelligence” about the technologies and their embedding in society. Organic and large area electronics promise to substitute silicon-based technologies, but firms and potential users are reluctant to invest...

  10. Electron collisions with atoms, ions, molecules, and surfaces: Fundamental science empowering advances in technology

    Science.gov (United States)

    Bartschat, Klaus; Kushner, Mark J.

    2016-06-01

    Electron collisions with atoms, ions, molecules, and surfaces are critically important to the understanding and modeling of low-temperature plasmas (LTPs), and so in the development of technologies based on LTPs. Recent progress in obtaining experimental benchmark data and the development of highly sophisticated computational methods is highlighted. With the cesium-based diode-pumped alkali laser and remote plasma etching of Si3N4 as examples, we demonstrate how accurate and comprehensive datasets for electron collisions enable complex modeling of plasma-using technologies that empower our high-technology-based society.

  11. Printing versus coating - What will be the future production technology for printed electronics?

    Energy Technology Data Exchange (ETDEWEB)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank [KROENERT GmbH and Co KG, Schuetzenstrasse 105, 22761 Hamburg (Germany)

    2015-02-17

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  12. Printing versus coating - What will be the future production technology for printed electronics?

    Science.gov (United States)

    Glawe, Andrea; Eggerath, Daniel; Schäfer, Frank

    2015-02-01

    The market of Large Area Organic Printed Electronics is developing rapidly to increase efficiency and quality as well as to lower costs further. Applications for OPV, OLED, RFID and compact Printed Electronic systems are increasing. In order to make the final products more affordable, but at the same time highly accurate, Roll to Roll (R2R) production on flexible transparent polymer substrates is the way forward. There are numerous printing and coating technologies suitable depending on the design, the product application and the chemical process technology. Mainly the product design (size, pattern, repeatability) defines the application technology.

  13. Diagnosis of electronic systems in SMT technological line

    Science.gov (United States)

    Butor, Marcin; Dziurdzia, Barbara

    2016-12-01

    The paper presents test and inspection strategies used in the company Fideltronik Poland, Sucha Beskidzka during the process of assembly of advanced electronic systems. As the example, the manufacturing process of modules for controlling and configuration of charts for video transmission has been analyzed. Various diagnostic methods such as Solder Paste Inspection (SPI), Automated Optical Inspection (AOI), Automated X-ray Inspection AXI and Functional Circuit Test FCT have been used to detect failures at different manufacturing stages of the modules and various repair actions have been proposed .

  14. Solder technology in the manufacturing of electronic products

    Energy Technology Data Exchange (ETDEWEB)

    Vianco, P.T.

    1993-08-01

    The electronics industry has relied heavily upon the use of soldering for both package construction and circuit assembly. The solder attachment of devices onto printed circuit boards and ceramic microcircuits has supported the high volume manufacturing processes responsible for low cost, high quality consumer products and military hardware. Defects incurred during the manufacturing process are minimized by the proper selection of solder alloys, substrate materials and process parameters. Prototyping efforts are then used to evaluate the manufacturability of the chosen material systems. Once manufacturing feasibility has been established, service reliability of the final product is evaluated through accelerated testing procedures.

  15. CMOS technology: a critical enabler for free-form electronics-based killer applications

    KAUST Repository

    Hussain, Muhammad Mustafa

    2016-05-17

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today’s CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics – and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path. © (2016) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is

  16. CMOS technology: a critical enabler for free-form electronics-based killer applications

    Science.gov (United States)

    Hussain, Muhammad M.; Hussain, Aftab M.; Hanna, Amir

    2016-05-01

    Complementary metal oxide semiconductor (CMOS) technology offers batch manufacturability by ultra-large-scaleintegration (ULSI) of high performance electronics with a performance/cost advantage and profound reliability. However, as of today their focus has been on rigid and bulky thin film based materials. Their applications have been limited to computation, communication, display and vehicular electronics. With the upcoming surge of Internet of Everything, we have critical opportunity to expand the world of electronics by bridging between CMOS technology and free form electronics which can be used as wearable, implantable and embedded form. The asymmetry of shape and softness of surface (skins) in natural living objects including human, other species, plants make them incompatible with the presently available uniformly shaped and rigidly structured today's CMOS electronics. But if we can break this barrier then we can use the physically free form electronics for applications like plant monitoring for expansion of agricultural productivity and quality, we can find monitoring and treatment focused consumer healthcare electronics - and many more creative applications. In our view, the fundamental challenge is to engage the mass users to materialize their creative ideas. Present form of electronics are too complex to understand, to work with and to use. By deploying game changing additive manufacturing, low-cost raw materials, transfer printing along with CMOS technology, we can potentially stick high quality CMOS electronics on any existing objects and embed such electronics into any future objects that will be made. The end goal is to make them smart to augment the quality of our life. We use a particular example on implantable electronics (brain machine interface) and its integration strategy enabled by CMOS device design and technology run path.

  17. Technology and equipment for processing diamond materials of modern electronics

    Directory of Open Access Journals (Sweden)

    Mityagin A. Yu.

    2009-02-01

    Full Text Available The methods of selection and sorting of diamonds according to their physical properties by modern physical methods of the analysis are developed, as well as the technologies of precision laser cutting of diamonds, their processing on a basis of thermochemical reactions in gas environment. The experimental installation for polishing and grinding of diamond plates, installation for slicing, installation for plasma-chemical processing are created. The techniques of surface roughness measurement of the processed plates and control of roughness parameters are developed. Some experimental results are given.

  18. Applications of Organic and Printed Electronics A Technology-Enabled Revolution

    CERN Document Server

    2013-01-01

    Organic and printed electronics can enable a revolution in the applications of electronics and this book offers readers an overview of the state-of-the-art in this rapidly evolving domain.  The potentially low cost, compatibility with flexible substrates and the wealth of devices that characterize organic and printed electronics will make possible applications that go far beyond the well-known displays made with large-area silicon electronics. Since organic electronics are still in their early stage, undergoing transition from lab-scale and prototype activities to production, this book serves as a valuable snapshot of the current landscape of the different devices enabled by this technology, reviewing all applications that are developing and those can be foreseen.   Provides a complete roadmap for organic and printed electronics research and development for the next several years; Includes an overview of the printing processes for organic electronics, along with state of the art applications, such as solar ...

  19. Reliability of lead-free solders in electronic packaging technology

    Science.gov (United States)

    Choi, Woojin

    The electromigration of flip chip solder bump (eutetic SnPb) has been studied at temperatures of 100, 125 and 150°C and current densities of 1.9 to 2.75 x 104 A/cm2. The under-bump-metallization on the chip side is thin film Al/Ni(V)/Cu and on the board side is thick Cu. By simulation, we found that current crowding occurs at the corner on the chip side where the electrons enter the solder ball. We are able to match this simulation to the real electromigration damage in the sample. The experimental result showed that voids initiated from the position of current crowding and propagated across the interface between UBM and the solder ball. The Cu-Sn intermetallic compounds formed during the reflow is known to adhere well to the thin film UBM, but they detached from the UBM after current stressing. Therefore, the UBM itself becomes part of the reliability problem of the flip chip solder joint under electromigration. Currently there is a renewed interest in Sn whisker growth owing to the introduction of Pb-free solder in electronic manufacturing. The leadframe is electroplated or finished with a layer of Pb-free solder. The solder is typically pure Sn or eutectic SnCu (0.7 atomic % Cu). It is a serious reliability concern in the use of the eutectic SnCu solder as leadframe surface finish due to the growth of long whiskers on it. The origin of the driving force of compressive stress can be mechanical, thermal, and chemical. Among them, the chemical force is the most important contribution to the whisker growth and its origin is due to the reaction between Sn and Cu to form intermetallic compound (IMC) at room temperature. For whisker or hillock growth, the surface cannot be free of oxide and it must be covered with oxide and the oxide must be a protective one so that it removes effectively all the vacancy sources and sinks on the surface. Hence, only those metals, which grow protective oxides such as Al and Sn, are known to have hillock growth or whisker growth. We

  20. ENVIRONMENTAL TECHNOLOGY VERIFICATION REPORT - PORTABLE GAS CHROMATOGRAPH ELECTRONIC SENSOR TECHNOLOGY MODEL 4100

    Science.gov (United States)

    The U.S. Environmental Protection Agency, through the Environmental Technology Verification Program, is working to accelerate the acceptance and use of innovative technologies that improve the way the United States manages its environmental problems. As part of this program, the...

  1. Electron impact ionization in plasma technologies; studies on atomic boron and BN molecule

    Science.gov (United States)

    Joshi, Foram M.; Joshipura, K. N.; Chaudhari, Asha S.

    2016-05-01

    Electron impact ionization plays important role in plasma technologies. Relevant cross sections on atomic boron are required to understand the erosion processes in fusion experiments. Boronization of plasma exposed surfaces of tokomaks has proved to be an effective way to produce very pure fusion plasmas. This paper reports comprehensive theoretical investigations on electron scattering with atomic Boron and Boron Nitride in solid phases. Presently we determine total ionization cross-section Qion and the summed-electronic excitation cross section ΣQexc in a standard quantum mechanical formalism called SCOP and CSP-ic methods. Our calculated cross sections are examined as functions of incident electron energy along with available comparisons.

  2. Recent progress on thin-film encapsulation technologies for organic electronic devices

    Science.gov (United States)

    Yu, Duan; Yang, Yong-Qiang; Chen, Zheng; Tao, Ye; Liu, Yun-Fei

    2016-03-01

    Among the advanced electronic devices, flexible organic electronic devices with rapid development are the most promising technologies to customers and industries. Organic thin films accommodate low-cost fabrication and can exploit diverse molecules in inexpensive plastic light emitting diodes, plastic solar cells, and even plastic lasers. These properties may ultimately enable organic materials for practical applications in industry. However, the stability of organic electronic devices still remains a big challenge, because of the difficulty in fabricating commercial products with flexibility. These organic materials can be protected using substrates and barriers such as glass and metal; however, this results in a rigid device and does not satisfy the applications demanding flexible devices. Plastic substrates and transparent flexible encapsulation barriers are other possible alternatives; however, these offer little protection to oxygen and water, thus rapidly degrading the devices. Thin-film encapsulation (TFE) technology is most effective in preventing water vapor and oxygen permeation into the flexible devices. Because of these (and other) reasons, there has been an intense interest in developing transparent barrier materials with much lower permeabilities, and their market is expected to reach over 550 million by 2025. In this study, the degradation mechanism of organic electronic devices is reviewed. To increase the stability of devices in air, several TFE technologies were applied to provide efficient barrier performance. In this review, the degradation mechanism of organic electronic devices, permeation rate measurement, traditional encapsulation technologies, and TFE technologies are presented.

  3. Packaging Technologies for 500C SiC Electronics and Sensors

    Science.gov (United States)

    Chen, Liang-Yu

    2013-01-01

    Various SiC electronics and sensors are currently under development for applications in 500C high temperature environments such as hot sections of aerospace engines and the surface of Venus. In order to conduct long-term test and eventually commercialize these SiC devices, compatible packaging technologies for the SiC electronics and sensors are required. This presentation reviews packaging technologies developed for 500C SiC electronics and sensors to address both component and subsystem level packaging needs for high temperature environments. The packaging system for high temperature SiC electronics includes ceramic chip-level packages, ceramic printed circuit boards (PCBs), and edge-connectors. High temperature durable die-attach and precious metal wire-bonding are used in the chip-level packaging process. A high temperature sensor package is specifically designed to address high temperature micro-fabricated capacitive pressure sensors for high differential pressure environments. This presentation describes development of these electronics and sensor packaging technologies, including some testing results of SiC electronics and capacitive pressure sensors using these packaging technologies.

  4. Potential of 3D printing technologies for fabrication of electron bolus and proton compensators.

    Science.gov (United States)

    Zou, Wei; Fisher, Ted; Zhang, Miao; Kim, Leonard; Chen, Ting; Narra, Venkat; Swann, Beth; Singh, Rachana; Siderit, Richard; Yin, Lingshu; Teo, Boon-Keng Kevin; McKenna, Michael; McDonough, James; Ning, Yue J

    2015-05-08

    In electron and proton radiotherapy, applications of patient-specific electron bolus or proton compensators during radiation treatments are often necessary to accommodate patient body surface irregularities, tissue inhomogeneity, and variations in PTV depths to achieve desired dose distributions. Emerging 3D printing technologies provide alternative fabrication methods for these bolus and compensators. This study investigated the potential of utilizing 3D printing technologies for the fabrication of the electron bolus and proton compensators. Two printing technologies, fused deposition modeling (FDM) and selective laser sintering (SLS), and two printing materials, PLA and polyamide, were investigated. Samples were printed and characterized with CT scan and under electron and proton beams. In addition, a software package was developed to convert electron bolus and proton compensator designs to printable Standard Tessellation Language file format. A phantom scalp electron bolus was printed with FDM technology with PLA material. The HU of the printed electron bolus was 106.5 ± 15.2. A prostate patient proton compensator was printed with SLS technology and polyamide material with -70.1 ± 8.1 HU. The profiles of the electron bolus and proton compensator were compared with the original designs. The average over all the CT slices of the largest Euclidean distance between the design and the fabricated bolus on each CT slice was found to be 0.84 ± 0.45 mm and for the compensator to be 0.40 ± 0.42 mm. It is recommended that the properties of specific 3D printed objects are understood before being applied to radiotherapy treatments.

  5. CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications.

    Science.gov (United States)

    Hussain, Aftab M; Hussain, Muhammad M

    2016-06-01

    Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today's digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered.

  6. CMOS-Technology-Enabled Flexible and Stretchable Electronics for Internet of Everything Applications

    KAUST Repository

    Hussain, Aftab M.

    2015-11-26

    Flexible and stretchable electronics can dramatically enhance the application of electronics for the emerging Internet of Everything applications where people, processes, data and devices will be integrated and connected, to augment quality of life. Using naturally flexible and stretchable polymeric substrates in combination with emerging organic and molecular materials, nanowires, nanoribbons, nanotubes, and 2D atomic crystal structured materials, significant progress has been made in the general area of such electronics. However, high volume manufacturing, reliability and performance per cost remain elusive goals for wide commercialization of these electronics. On the other hand, highly sophisticated but extremely reliable, batch-fabrication-capable and mature complementary metal oxide semiconductor (CMOS)-based technology has facilitated tremendous growth of today\\'s digital world using thin-film-based electronics; in particular, bulk monocrystalline silicon (100) which is used in most of the electronics existing today. However, one fundamental challenge is that state-of-the-art CMOS electronics are physically rigid and brittle. Therefore, in this work, how CMOS-technology-enabled flexible and stretchable electronics can be developed is discussed, with particular focus on bulk monocrystalline silicon (100). A comprehensive information base to realistically devise an integration strategy by rational design of materials, devices and processes for Internet of Everything electronics is offered. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Teaching ethics and technology with Agora, an electronic tool.

    Science.gov (United States)

    van der Burg, Simone; van de Poel, Ibo

    2005-04-01

    Courses on ethics and technology have become compulsory for many students at the three Dutch technical universities during the past few years. During this time, teachers have faced a number of didactic problems, which are partly due to a growing number of students. In order to deal with these challenges, teachers in ethics at the three technical universities in the Netherlands--in Delft, Eindhoven and Twente--have developed a web-based computer program called Agora (see www.ethicsandtechnology.com). This program enables students to exercise their ethical understanding and skills extensively. The program makes it possible for students to participate actively in moral reflection and reasoning, and to develop the moral competencies that are needed in their later professional practice. The developers of the program have tried to avoid two traps. Firstly, they rejected, from the outset, a cookbook style of dealing with ethical problems that applied ethics is often taken to be and, secondly, they wanted to design a flexible program that respects the student's as well as the teacher's creativity, and that tries to engage students in moral reflection. Agora meets these requirements. The program offers possibilities that extend beyond the requirements that are usually accepted for case-exercises in applied ethics, and that have been realised in several other computer models for teaching ethics. In this article, we describe the main considerations in the development of Agora and the features of the resulting program.

  8. Transforming health care the financial impact of technology, electronic tools and data mining

    CERN Document Server

    Fasano, Phil

    2013-01-01

    The future of healthcare technologies, and what they mean for investors and entrepreneurs The healthcare technology revolution is just around the corner. And when it arrives, it will change and enrich our lives in ways we can only begin to imagine. Doctors will perform blood pressure readings via video chat and nutritionists will analyze diet based on photos taken with cellphone cameras. Transforming Health Care combines healthcare, technology, and finance in an innovative new way that explains the future of healthcare and its effects on patient care, exploring the emergence of electronic tools that will transform the medical industry. Explaining how technology, not politics, will lead the future of the healthcare revolution, author and healthcare technology expert Phil Fasano presents real-life examples that show how the next generation of medical breakthroughs will come from the instant exchange of information across the world Explores how new technologies will radically change the future of healthcare by m...

  9. Innovative, wearable snap connector technology for improved device networking in electronic garments

    Science.gov (United States)

    Kostrzewski, Andrew A.; Lee, Kang S.; Gans, Eric; Winterhalter, Carole A.; Jannson, Tomasz P.

    2007-04-01

    This paper discusses Physical Optics Corporation's (POC) wearable snap connector technology that provides for the transfer of data and power throughout an electronic garment (e-garment). These connectors resemble a standard garment button and can be mated blindly with only one hand. Fully compatible with military clothing, their application allows for the networking of multiple electronic devices and an intuitive method for adding/removing existing components from the system. The attached flexible cabling also permits the rugged snap connectors to be fed throughout the standard webbing found in military garments permitting placement in any location within the uniform. Variations of the snap electronics/geometry allow for integration with USB 2.0 devices, RF antennas, and are capable of transferring high bandwidth data streams such as the 221 Mbps required for VGA video. With the trend towards providing military officers with numerous electronic devices (i.e., heads up displays (HMD), GPS receiver, PDA, etc), POC's snap connector technology will greatly improve cable management resulting in a less cumbersome uniform. In addition, with electronic garments gaining widespread adoption in the commercial marketplace, POC's technology is finding applications in such areas as sporting good manufacturers and video game technology.

  10. The development of an electronic business based on the MySQL technology

    Directory of Open Access Journals (Sweden)

    Andreea IONESCU

    2011-09-01

    Full Text Available This article aims to demonstrate the importance of using relational database management system in working with web applications. We chose MySQL technology like representative relational database management system because has: portability, scalability, speed, is easy to use, is open source, is widely used by web developers and provides good security. We watched the analysis of an electronic business. We also presented the technologies that we have used: PHP, MySQL, HTML, CSS.

  11. Recent Advancements in Liquid Metal Flexible Printed Electronics: Properties, Technologies, and Applications

    Directory of Open Access Journals (Sweden)

    Xuelin Wang

    2016-11-01

    Full Text Available This article presents an overview on typical properties, technologies, and applications of liquid metal based flexible printed electronics. The core manufacturing material—room-temperature liquid metal, currently mainly represented by gallium and its alloys with the properties of excellent resistivity, enormous bendability, low adhesion, and large surface tension, was focused on in particular. In addition, a series of recently developed printing technologies spanning from personal electronic circuit printing (direct painting or writing, mechanical system printing, mask layer based printing, high-resolution nanoimprinting, etc. to 3D room temperature liquid metal printing is comprehensively reviewed. Applications of these planar or three-dimensional printing technologies and the related liquid metal alloy inks in making flexible electronics, such as electronical components, health care sensors, and other functional devices were discussed. The significantly different adhesions of liquid metal inks on various substrates under different oxidation degrees, weakness of circuits, difficulty of fabricating high-accuracy devices, and low rate of good product—all of which are challenges faced by current liquid metal flexible printed electronics—are discussed. Prospects for liquid metal flexible printed electronics to develop ending user electronics and more extensive applications in the future are given.

  12. Developing a comprehensive electronic health record to enhance nursing care coordination, use of technology, and research.

    Science.gov (United States)

    Rantz, Marilyn J; Skubic, Marjorie; Alexander, Greg; Popescu, Mihail; Aud, Myra A; Wakefield, Bonnie J; Koopman, Richelle J; Miller, Steven J

    2010-01-01

    As in acute care, use of health information technology in long-term care holds promise for increased efficiency, better accuracy, reduced costs, and improved outcomes. A comprehensive electronic health record (EHR), which encompasses all health care measures that clinicians want to use-both standard health care assessments and those acquired through emerging technology-is the key to improved, efficient clinical decision making. New technologies using sensors to passively monitor older adults at home are being developed and are commercially available. However, integrating the clinical information systems with passive monitoring data so that clinical decision making is enhanced and patient records are complete is challenging. Researchers at the University of Missouri (MU) are developing a comprehensive EHR to: (a) enhance nursing care coordination at TigerPlace, independent senior housing that helps residents age in place; (b) integrate clinical data and data from new technology; and (c) advance technology and clinical research. Copyright 2010, SLACK Incorporated.

  13. An electron microscopic study on VIP-, BOM- and CCK-like immunoreactive terminals in the celiac-superior mesenteric ganglion complex of the guinea pig.

    Science.gov (United States)

    Hamaji, M; Kawai, Y; Kawashima, Y; Tohyama, M

    1989-05-29

    The distribution and fine structure were studied of the following 3 peptide-containing fibers of enteric origin, vasoactive intestinal polypeptide (VIP), bombesin (BOM) and cholecystokinin (CCK)-like immunoreactive peptide in the celiac-superior mesenteric ganglion complex (CMG) of the guinea pig. These peptides, especially VIP, were distributed more densely on the mesenteric side than on the celiac side of the CMG, and their distribution shared a similar mosaic pattern. Immunoelectron microscopic analysis revealed that the fibers formed synaptic contacts with the proximal dendrites of the principal ganglion cells, however, the profiles of these synaptic junctions differed between fibers. Those containing VIP or CCK formed symmetrical synapses, while those containing BOM formed assymetrical ones. This suggests that there are some functional differences between these enterofugal fibers in the CMG.

  14. Use of electronic nose technology to identify cattle experimentally infected with Mycobacterium bovis: A pilot study

    Science.gov (United States)

    Electronic nose technology has historically been utilized for the detection of volatile organic compounds (VOCs) and semi-volatile compounds in air, soil, water, and for quality control in food, beverage and cosmetic industries. Breath analysis has been used experimentally in humans and animals to ...

  15. 12 CFR 352.5 - Accessibility to electronic and information technology.

    Science.gov (United States)

    2010-01-01

    ... information and data by members of the public who are not individuals with disabilities. (b) When development... 12 Banks and Banking 4 2010-01-01 2010-01-01 false Accessibility to electronic and information technology. 352.5 Section 352.5 Banks and Banking FEDERAL DEPOSIT INSURANCE CORPORATION REGULATIONS AND...

  16. Vertical and Horizontal Integration of Laboratory Curricula and Course Projects across the Electronic Engineering Technology Program

    Science.gov (United States)

    Zhan, Wei; Goulart, Ana; Morgan, Joseph A.; Porter, Jay R.

    2011-01-01

    This paper discusses the details of the curricular development effort with a focus on the vertical and horizontal integration of laboratory curricula and course projects within the Electronic Engineering Technology (EET) program at Texas A&M University. Both software and hardware aspects are addressed. A common set of software tools are…

  17. Electronic Communications Technologies and the Transition to College: Links to Parent-Child Attachment and Adjustment

    Science.gov (United States)

    Sarigiani, Pamela A.; Trumbell, Jill M.; Camarena, Phame M.

    2013-01-01

    Electronic communications technologies (ECTs) help college students and parents remain in contact. Because recent reports have emphasized a link between ECTs, helicopter parenting, and autonomy issues, this study focused on the significance of contact patterns for attachment and student adjustment. First-semester college students (199 female, 81…

  18. Integrating the Schoolhouse and the Marketplace: A Preliminary Assessment of the Emerging Role of Electronic Technology.

    Science.gov (United States)

    Molnar, Alex

    This paper focuses on how, by reinforcing and exploiting the emphasis on electronic technologies in school reform, marketers are integrating school children into the advertising and marketing system. The ZapMe! program is a for-profit venture that proposes to derive its profits from activities that link the academic activities of schools and the…

  19. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology

    NARCIS (Netherlands)

    Biemond, J.E.; Aquarius, R.J.M.; Verdonschot, N.J.J.; Buma, P.

    2011-01-01

    BACKGROUND: Electron beam melting (E-beam) is a new technology to produce 3-dimensional surface topographies for cementless orthopedic implants. METHODS: The friction coefficients of two newly developed E-beam produced surface topographies were in vitro compared with sandblasted E-beam and titanium

  20. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology

    NARCIS (Netherlands)

    Biemond, J. Elizabeth; Aquarius, Rene; Verdonschot, Nicolaas Jacobus Joseph; Buma, Pieter

    2011-01-01

    Background Electron beam melting (E-beam) is a new technology to produce 3-dimensional surface topographies for cementless orthopedic implants. Methods The friction coefficients of two newly developed E-beam produced surface topographies were in vitro compared with sandblasted E-beam and titanium

  1. Educational Implications of In-Home Electronic Technology. Research Memorandum--33.

    Science.gov (United States)

    Walling, Victor C., Jr.; And Others

    This study identifies and assesses the potential impact of new electronic technologies on education in private homes, and looks beyond immediate incremental changes to broader, more subtle, complex, or threatening changes that may require attention from federal policymakers. Some educational implications are discussed: (1) equality of access to…

  2. Theoretical and practical considerations for teaching diagnostic electronic-nose technologies to clinical laboratory technicians

    Science.gov (United States)

    Alphus D. Wilson

    2012-01-01

    The rapid development of new electronic technologies and instruments, utilized to perform many current clinical operations in the biomedical field, is changing the way medical health care is delivered to patients. The majority of test results from laboratory analyses, performed with these analytical instruments often prior to clinical examinations, are frequently used...

  3. American Society for Therapeutic Radiology and Oncology (ASTRO) Emerging Technology Committee report on electronic brachytherapy.

    Science.gov (United States)

    Park, Catherine C; Yom, Sue S; Podgorsak, Matthew B; Harris, Eleanor; Price, Robert A; Bevan, Alison; Pouliot, Jean; Konski, Andre A; Wallner, Paul E

    2010-03-15

    The development of novel technologies for the safe and effective delivery of radiation is critical to advancing the field of radiation oncology. The Emerging Technology Committee of the American Society for Therapeutic Radiology and Oncology appointed a Task Group within its Evaluation Subcommittee to evaluate new electronic brachytherapy methods that are being developed for, or are already in, clinical use. The Task Group evaluated two devices, the Axxent Electronic Brachytherapy System by Xoft, Inc. (Fremont, CA), and the Intrabeam Photon Radiosurgery Device by Carl Zeiss Surgical (Oberkochen, Germany). These devices are designed to deliver electronically generated radiation, and because of their relatively low energy output, they do not fall under existing regulatory scrutiny of radioactive sources that are used for conventional radioisotope brachytherapy. This report provides a descriptive overview of the technologies, current and future projected applications, comparison of competing technologies, potential impact, and potential safety issues. The full Emerging Technology Committee report is available on the American Society for Therapeutic Radiology and Oncology Web site.

  4. Low cost, biocompatible elastic and conformable electronic technologies using MID in stretchable polymer.

    Science.gov (United States)

    Axisa, F; Brosteaux, D; De Leersnyder, E; Bossuyt, F; Gonzalez, M; De Smet, N; Schacht, E; Rymarczyk-Machal, M; Vanfleteren, J

    2007-01-01

    For user comfort reasons, electronic circuits for implantation in the human body or for use as smart clothes should ideally be soft, stretchable and elastic. In this contribution the results of an MID (Molded Interconnect Device) technology will be presented, showing the feasibility of functional stretchable electronic circuits. In the developed technology rigid or flexible standard components are interconnected by meander shaped metallic wires and embedded by molding in a stretchable substrate polymer. Several technologies have been developed to this purpose, which combine low cost and good reliability under mechanical strain. In this way reliable stretchability of the circuits above 100% has been demonstrated. Enhanced reliability has been reached using an additional conductive polymer layer.

  5. IMPROVING THE TECHNOLOGY OF BELORUSSIAN RAILWAY IN CONDITIONS OF ELECTRONIC DOCUMENTS USAGE

    Directory of Open Access Journals (Sweden)

    M. M. Kolos

    2016-08-01

    Full Text Available Purpose. The scientific paper highlights improving the technology of railway transport in the Republic of Belarus in conditions of electronic legally significant documents. Methodology. The study covered the collection of statistical data on the duration of separate technological operations performance, the evaluation of static data and the descriptive analysis of their characteristics. When assessing the effectiveness of the proposed measures we used methods of expert estimations, methods of evaluating the effectiveness of IT investments. Findings. Technology, hardware, software, organizational and other aspects of electronic legally significant documents used in freight and commercial work are determined. The work defines the most important directions of technology improvements at Belarusian Railway entities and their relations with shippers and consignees through the use of electronic legally significant documents. These directions are as follows: simplification of station commercial costs accounting, automation of technological operations, improving the interaction between the railway tracks and adjunction stations, simplification of transport planning and demand performance record, implementation of common information space for all participants of transportation process. The predictive estimate of efficiency for implementation of electronic legally significant documents in freight and commercial work of the Belarusian railway is calculated. Originality. This article presents a dual model of digital signature as a tool for the automatic fixation of technological operations or for specifying the time for its implementation, which allows converting a number of technological processes to a new level, helping to create a common information space of freight traffic. Practical value. The obtained results are used to form the list of the actions directed on perfection of railway transport technology in conditions of electronic legally significant

  6. Intraoperative neuromonitoring of the external branch of the superior laryngeal nerve during thyroidectomy: the need for evidence-based data and perioperative technical/technological standardization.

    Science.gov (United States)

    Mangano, Alberto; Lianos, Georgios D; Boni, Luigi; Kim, Hoon Yub; Roukos, Dimitrios H; Dionigi, Gianlorenzo

    2014-01-01

    The external branch of the superior laryngeal nerve (EBSLN) is surgically relevant since its close anatomical proximity to the superior thyroid vessels. There is heterogeneity in the EBSLN anatomy and EBSLN damage produces changes in voice that are very heterogenous and difficult to diagnose. The reported prevalence of EBSLN injury widely ranges. EBSLN iatrogenic injury is considered the most commonly underestimated complication in endocrine surgery because vocal assessment underestimates such event and laryngoscopic postsurgical evaluation does not show standardized findings. In order to decrease the risk for EBSLN injury, multiple surgical approaches have been described so far. IONM provides multiple advantages in the EBSLN surgical approach. In this review, we discuss the current state of the art of the monitored approach to the EBSLN. In particular, we summarize, providing our additional remarks, the most relevant aspects of the standardized technique brilliantly described by the INMSG (International Neuromonitoring Study Group). In conclusion, in our opinion, there is currently the need for more prospective randomized trials investigating the electrophysiological and pathological aspects of the EBSLN for a better understanding of the role of IONM in the EBSLN surgery.

  7. Intraoperative Neuromonitoring of the External Branch of the Superior Laryngeal Nerve during Thyroidectomy: The Need for Evidence-Based Data and Perioperative Technical/Technological Standardization

    Directory of Open Access Journals (Sweden)

    Alberto Mangano

    2014-01-01

    Full Text Available The external branch of the superior laryngeal nerve (EBSLN is surgically relevant since its close anatomical proximity to the superior thyroid vessels. There is heterogeneity in the EBSLN anatomy and EBSLN damage produces changes in voice that are very heterogenous and difficult to diagnose. The reported prevalence of EBSLN injury widely ranges. EBSLN iatrogenic injury is considered the most commonly underestimated complication in endocrine surgery because vocal assessment underestimates such event and laryngoscopic postsurgical evaluation does not show standardized findings. In order to decrease the risk for EBSLN injury, multiple surgical approaches have been described so far. IONM provides multiple advantages in the EBSLN surgical approach. In this review, we discuss the current state of the art of the monitored approach to the EBSLN. In particular, we summarize, providing our additional remarks, the most relevant aspects of the standardized technique brilliantly described by the INMSG (International Neuromonitoring Study Group. In conclusion, in our opinion, there is currently the need for more prospective randomized trials investigating the electrophysiological and pathological aspects of the EBSLN for a better understanding of the role of IONM in the EBSLN surgery.

  8. CIS5/405: Web Technology in Healthcare - Delivering Electronic Records Using the Clinical Intranet

    Science.gov (United States)

    Berger, M

    1999-01-01

    Introduction The development of electronic records - EPR & EHR (Electronic Patient Records & Electronic Health Records) - requires the use of innovative technology. With the emergence of web enabled applications, that technology is now available. In this paper, we consider the opportunities afforded by web technology and articulate their vision for making electronic records an affordable reality through the use of the ViewMax Integration Server. It is designed to be used as a discussion document for Health Authorities, Primary Care Groups and Trusts when considering their shared strategies for building electronic records. Methods Hospitals that have developed, or are developing EPR, have generally adopted one of the following approaches: Big Bang solutions or Interfaced solutions. Whilst both of these models have their merits, both also have significant limitations and disadvantages. With the advent of web technology, a "third way" has emerged. Through the development of e-commerce in the commercial sector, sophisticated Host-to-Web integration tools are now available, providing facilities which would have seemed impossible only a few years ago: Systems can now be integrated and accessed through an industry standard web browser. Legacy systems can be provided with a modern, intuitive interface, designed to support the needs of particular groups of users, and data from multiple, disparate systems, applications and screens can be combined into a single web page. Data from one system can be easily transferred to other applications. New applications developed using modern databases can be seamlessly integrated with existing host systems. Most importantly, this new approach enables full interactive access to legacy technologies using a browser, without requiring any modification to host systems. Utilising the latest Web integration tools it is now possible to incrementally develop cost-effective electronic records. Results The hospital is an average acute district

  9. Electron beam technology for multipollutant emissions control from heavy fuel oil-fired boiler.

    Science.gov (United States)

    Chmielewski, Andrzej G; Ostapczuk, Anna; Licki, Janusz

    2010-08-01

    The electron beam treatment technology for purification of exhaust gases from the burning of heavy fuel oil (HFO) mazout with sulfur content approximately 3 wt % was tested at the Institute of Nuclear Chemistry and Technology laboratory plant. The parametric study was conducted to determine the sulfur dioxide (SO2), oxides of nitrogen (NO(x)), and polycyclic aromatic hydrocarbon (PAH) removal efficiency as a function of temperature and humidity of irradiated gases, absorbed irradiation dose, and ammonia stoichiometry process parameters. In the test performed under optimal conditions with an irradiation dose of 12.4 kGy, simultaneous removal efficiencies of approximately 98% for SO2, and 80% for NO(x) were recorded. The simultaneous decrease of PAH and one-ringed aromatic hydrocarbon (benzene, toluene, and xylenes [BTX]) concentrations was observed in the irradiated flue gas. Overall removal efficiencies of approximately 42% for PAHs and 86% for BTXs were achieved with an irradiation dose 5.3 kGy. The decomposition ratio of these compounds increased with an increase of absorbed dose. The decrease of PAH and BTX concentrations was followed by the increase of oxygen-containing aromatic hydrocarbon concentrations. The PAH and BTX decomposition process was initialized through the reaction with hydroxyl radicals that formed in the electron beam irradiated flue gas. Their decomposition process is based on similar principles as the primary reaction concerning SO2 and NO(x) removal; that is, free radicals attack organic compound chains or rings, causing volatile organic compound decomposition. Thus, the electron beam flue gas treatment (EBFGT) technology ensures simultaneous removal of acid (SO2 and NO(x)) and organic (PAH and BTX) pollutants from flue gas emitted from burning of HFO. This technology is a multipollutant emission control technology that can be applied for treatment of flue gas emitted from coal-, lignite-, and HFO-fired boilers. Other thermal processes such

  10. Design of a new electron cyclotron resonance ion source at Oshima National College of Maritime Technology

    Energy Technology Data Exchange (ETDEWEB)

    Asaji, T., E-mail: asaji@oshima-k.ac.jp; Hirabara, N.; Izumihara, T.; Nakamizu, T.; Ohba, T.; Nakamura, T.; Furuse, M. [Oshima National College of Maritime Technology (OCMT), 1091-1 Komatsu, Suo-oshima, Yamaguchi 742-2193 (Japan); Hitobo, T. [Tateyama Machine Co., Ltd., 30 Shimonoban, Toyama 930-1305 (Japan); Kato, Y. [Graduate School of Engineering, Osaka University, 2-1 Yamada-oka, Suita, Osaka 565-0871 (Japan)

    2014-02-15

    A new electron cyclotron resonance ion/plasma source has been designed and will be built at Oshima National College of Maritime Technology by early 2014. We have developed an ion source that allows the control of the plasma parameters over a wide range of electron temperatures for material research. A minimum-B magnetic field composed of axial mirror fields and radial cusp fields was designed using mainly Nd-Fe-B permanent magnets. The axial magnetic field can be varied by three solenoid coils. The apparatus has 2.45 GHz magnetron and 2.5–6.0 GHz solid-state microwave sources.

  11. Health information technology: medical record documentation issues in the electronic era.

    Science.gov (United States)

    Dacey, Bill; Bholat, Michelle Anne

    2012-12-01

    This article outlines the regulatory movement propelling physicians into the electronic health record environment and the subsequent emergence of quality issues in the medical record. There are benefits and downside risks for implementing electronic health records as part of the desire of a practice or institution to build patient-centered medical homes. The intersection of how a practice or institution collects and reports quality metrics using health information technology and subsequently submits claims for services rendered has created unforeseen challenges for which leadership must be aware and address proactively.

  12. Electronic data capture platform for clinical research based on mobile phones and near field communication technology.

    Science.gov (United States)

    Morak, Jürgen; Schwetz, Verena; Hayn, Dieter; Fruhwald, Friedrich; Schreier, Gunter

    2008-01-01

    Electronic data capture systems support data acquisition for clinical research and enable the evaluation of new investigational medical devices. In case of evaluating a device the most challenging part is the user interface i.e. the solution how to acquire the data within a clinical setting and to synchronize them with a web-based data centre. The aim of this paper is to describe the development of an electronic data capture system with a mobile data input solution based on mobile phones and Near Field Communication technology. This system was evaluated within a real clinical setting and demonstrated high usability, security and reliability.

  13. Rural gifted students who are deaf or hard of hearing: how electronic technology can help.

    Science.gov (United States)

    Belcastro, Frank P

    2004-01-01

    Electronic technology can be used to overcome many of the barriers and other factors that restrict delivery of services to rural schools; it can also expand the world of rural gifted students who are deaf or hard of hearing. Online college and high school Web sites that offer courses are listed, as well as a Web site for tutoring and one offering help for teachers of rural gifted students who are deaf or hard of hearing. Recommendations are made for ways that legislatures and rural school districts can make Internet resources and assistive technology more widely available in rural educational settings.

  14. Advanced Transmission Electron Microscopy Applications in Nano-Materials and Nano-Technology Developments

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Nano-technology development is nowadays a very hot topics in many research fields. Nano-materials are the foundations for developing this new technology. In order to fully understand the basic material science problems behind this topics, transmission electron microscopy (TEM) becomes the must and one of the most important technique to analyze the nano-size structure and composition using the most advanced high resolution TEM technique with nano-beam EDS and energy filter EELS to study the fine structures, crystallography, chemical composition, and optical properties of many different nano-materials in different industries applications.

  15. Advanced Transmission Electron Microscopy Applications in Nano-Materials and Nano-Technology Developments

    Institute of Scientific and Technical Information of China (English)

    KAI; J.J.

    2001-01-01

    Nano-technology development is nowadays a very hot topics in many research fields. Nano-materials are the foundations for developing this new technology. In order to fully understand the basic material science problems behind this topics, transmission electron microscopy (TEM) becomes the must and one of the most important technique to analyze the nano-size structure and composition using the most advanced high resolution TEM technique with nano-beam EDS and energy filter EELS to study the fine structures, crystallography, chemical composition, and optical properties of many different nano-materials in different industries applications.  ……

  16. Flexible MEMS: A novel technology to fabricate flexible sensors and electronics

    Science.gov (United States)

    Tu, Hongen

    This dissertation presents the design and fabrication techniques used to fabricate flexible MEMS (Micro Electro Mechanical Systems) devices. MEMS devices and CMOS(Complementary Metal-Oxide-Semiconductor) circuits are traditionally fabricated on rigid substrates with inorganic semiconductor materials such as Silicon. However, it is highly desirable that functional elements like sensors, actuators or micro fluidic components to be fabricated on flexible substrates for a wide variety of applications. Due to the fact that flexible substrate is temperature sensitive, typically only low temperature materials, such as polymers, metals, and organic semiconductor materials, can be directly fabricated on flexible substrates. A novel technology based on XeF2(xenon difluoride) isotropic silicon etching and parylene conformal coating, which is able to monolithically incorporate high temperature materials and fluidic channels, was developed at Wayne State University. The technology was first implemented in the development of out-of-plane parylene microneedle arrays that can be individually addressed by integrated flexible micro-channels. These devices enable the delivery of chemicals with controlled temporal and spatial patterns and allow us to study neurotransmitter-based retinal prosthesis. The technology was further explored by adopting the conventional SOI-CMOS processes. High performance and high density CMOS circuits can be first fabricated on SOI wafers, and then be integrated into flexible substrates. Flexible p-channel MOSFETs (Metal-Oxide-Semiconductor Field-Effect-Transistors) were successfully integrated and tested. Integration of pressure sensors and flow sensors based on single crystal silicon has also been demonstrated. A novel smart yarn technology that enables the invisible integration of sensors and electronics into fabrics has been developed. The most significant advantage of this technology is its post-MEMS and post-CMOS compatibility. Various high

  17. Next Generation Electronic Passport Scheme using Cryptographic Authentication Protocols and Multiple Biometrics Technology

    Directory of Open Access Journals (Sweden)

    V.K. Narendira Kumar

    2013-08-01

    Full Text Available Electronic passports (e-passports are to prevent the illegal entry of traveller into a specific country and limit the use of counterfeit documents by more accurate identification of an individual. The epassport, as it is sometimes called, represents a bold initiative in the deployment of two new technologies: cryptography security and biometrics (face, fingerprints, palm prints and iris. A passport contains the important personal information of holder such as photo, name, date of birth and place, nationality, date of issue, date of expiry, authority and so on. The goal of the adoption of the electronic passport is not only to expedite processing at border crossings, but also to increase security. The paper explores the privacy and security implications of this impending worldwide experiment in biometrics authentication technology.

  18. Development of manufacturing technologies of printed circuits at the Mining Electronics Plant

    Energy Technology Data Exchange (ETDEWEB)

    Banas, J.; Giglok, M.; Skalski, Z. (Zaklad Elektroniki Gorniczej, Tychy (Poland))

    1989-12-01

    Discusses development of printed circuit manufacturing by the Mining Electronics Plant in Tychy. The circuits are used in control equipment and computerized control systems for underground black coal mining in Poland. The following aspects of circuit manufacturing are evaluated: design of printed circuits, materials used for circuit manufacturing (copper), manufacturing technologies, licenses and know-how, quality requirements, quality assurance and quality control, reliability, safety.

  19. Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry

    Directory of Open Access Journals (Sweden)

    Alphus D. Wilson

    2013-02-01

    Full Text Available Electronic-nose (e-nose instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems.

  20. Diverse applications of electronic-nose technologies in agriculture and forestry.

    Science.gov (United States)

    Wilson, Alphus D

    2013-02-08

    Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems.

  1. Advancing Partner Notification Through Electronic Communication Technology: A Review of Acceptability and Utilization Research.

    Science.gov (United States)

    Pellowski, Jennifer; Mathews, Catherine; Kalichman, Moira O; Dewing, Sarah; Lurie, Mark N; Kalichman, Seth C

    2016-06-01

    A cornerstone of sexually transmitted infection (STI) prevention is the identification, tracing, and notification of sex partners of index patients. Although partner notification reduces disease burden and prevents new infections as well as reinfections, studies show that only a limited number of partners are ever notified. Electronic communication technologies, namely, the Internet, text messaging, and phone calls (i.e., e-notification), have the potential to expand partner services. We conducted a systematic review of studies that have investigated the acceptability and utility of e-notification. We identified 23 studies that met the following criteria: (a) 9 studies presented data on the acceptability of technology-based communications for contacting sex partner(s), and (b) 14 studies reported on the utilization of communication technologies for partner notification. Studies found high levels of interest in and acceptability of e-notification; however, there was little evidence for actual use of e-notification. Taken together, results suggest that electronic communications could have their greatest impact in notifying less committed partners who would otherwise be uninformed of their STI exposure. In addition, all studies to date have been conducted in resource-rich countries, although the low cost of e-notification may have its greatest impact in resource-constrained settings. Research is needed to determine the best practices for exploiting the opportunities afforded by electronic communications for expanding STI partner services.

  2. Diverse Applications of Electronic-Nose Technologies in Agriculture and Forestry

    Science.gov (United States)

    Wilson, Alphus D.

    2013-01-01

    Electronic-nose (e-nose) instruments, derived from numerous types of aroma-sensor technologies, have been developed for a diversity of applications in the broad fields of agriculture and forestry. Recent advances in e-nose technologies within the plant sciences, including improvements in gas-sensor designs, innovations in data analysis and pattern-recognition algorithms, and progress in material science and systems integration methods, have led to significant benefits to both industries. Electronic noses have been used in a variety of commercial agricultural-related industries, including the agricultural sectors of agronomy, biochemical processing, botany, cell culture, plant cultivar selections, environmental monitoring, horticulture, pesticide detection, plant physiology and pathology. Applications in forestry include uses in chemotaxonomy, log tracking, wood and paper processing, forest management, forest health protection, and waste management. These aroma-detection applications have improved plant-based product attributes, quality, uniformity, and consistency in ways that have increased the efficiency and effectiveness of production and manufacturing processes. This paper provides a comprehensive review and summary of a broad range of electronic-nose technologies and applications, developed specifically for the agriculture and forestry industries over the past thirty years, which have offered solutions that have greatly improved worldwide agricultural and agroforestry production systems. PMID:23396191

  3. Nanosecond pulse-width electron diode based on dielectric wall accelerator technology

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Quantang, E-mail: zhaoquantang@impcas.ac.cn [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhang, Z.M.; Yuan, P.; Cao, S.C.; Shen, X.K.; Jing, Y. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Yu, C.S. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Li, Z.P.; Liu, M.; Xiao, R.Q. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); Zong, Y.; Wang, Y.R. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Zhao, H.W. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 730000 (China)

    2013-11-21

    An electron diode using a short section of dielectric wall accelerator (DWA) has been under development at the Institute of Modern Physics (IMP), Chinese Academy of Sciences. Tests have been carried out with spark gap switches triggered by lasers. The stack voltage efficiency of a four-layer of Blumleins reached about 60–70% with gas filled spark gap switching. The generated pulse voltage of peak amplitude of 23 kV and pulse width of 5 ns is used to extract and accelerate an electron beam of 320 mA, measured by a fast current transformer. A nanosecond pulse width electron diode was achieved successfully. Furthermore, the principle of a DWA is well proven and the development details and discussions are presented in this article. -- Highlights: •The key technology of DWA, including switches and pulse forming lines were studied. •The SiC PCSS obtained from Shanghai Institute were tested. •Two layers ZIP lines (new structure) and four layers Blumlein lines were studied with laser triggered spark gap switches. •A nanosecond pulse-width electron diode based on DWA technologies is achieved and studied experimentally. •The principle of DWA is also proved by the diode.

  4. Android and PSoC Technology Applied to Electronic Tongue Development

    Directory of Open Access Journals (Sweden)

    Alvaro Arrieta A

    2015-07-01

    Full Text Available Nowadays, in the food industry, analyzing the quality of alimentary products has become a necessity. As a result, producers have been searching for new accurate methods to analyze food quality. The development of bio-inspired devices (electronic nose and electronic tongue is a potential alternative to supply this need. The current project shows the development of a prototype circuit based on PSoC technology, which is used as a signal processing stage in an electronic tongue device with the ability to discriminate and classify samples of raw milk. In general, electronic tongues consist of electrochemical sensors array, a signals processing stage and a data processing stage. PSoC is an integrated circuit composed of analog and digital blocks into a configurable core. With the use of PSoC microchip, it is possible to develop a portable and small electrochemical device. This prototype takes measures from electrochemical sensors exposed to samples of drinks using the cyclic voltammetry technique; these signals are processed and transmitted to the next stage, which shows the response from the electrochemical sensors through an I-V curve, called voltammogram. With the development of this device, it was found that the application of PSoC technology on electrochemical measurement devices is important, due to its ability to develop cheaper, smaller, faster and sturdier devices.

  5. Technology.

    Science.gov (United States)

    Online-Offline, 1998

    1998-01-01

    Focuses on technology, on advances in such areas as aeronautics, electronics, physics, the space sciences, as well as computers and the attendant progress in medicine, robotics, and artificial intelligence. Describes educational resources for elementary and middle school students, including Web sites, CD-ROMs and software, videotapes, books,…

  6. Packaging Technologies for 500 C SiC Electronics and Sensors: Challenges in Material Science and Technology

    Science.gov (United States)

    Chen, Liang-Yu; Neudeck, Philip G.; Behelm, Glenn M.; Spry, David J.; Meredith, Roger D.; Hunter, Gary W.

    2015-01-01

    This paper presents ceramic substrates and thick-film metallization based packaging technologies in development for 500C silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chip-level packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550C. The 96 alumina packaging system composed of chip-level packages and PCBs has been successfully tested with high temperature SiC discrete transistor devices at 500C for over 10,000 hours. In addition to tests in a laboratory environment, a SiC junction field-effect-transistor (JFET) with a packaging system composed of a 96 alumina chip-level package and an alumina printed circuit board was tested on low earth orbit for eighteen months via a NASA International Space Station experiment. In addition to packaging systems for electronics, a spark-plug type sensor package based on this high temperature interconnection system for high temperature SiC capacitive pressure sensors was also developed and tested. In order to further significantly improve the performance of packaging system for higher packaging density, higher operation frequency, power rating, and even higher temperatures, some fundamental material challenges must be addressed. This presentation will discuss previous development and some of the challenges in material science (technology) to improve high temperature dielectrics for packaging applications.

  7. An Analysis of Knowledge Sharing Approaches for Emerging-technology-based Strategic Alliances in Electronic Industry

    Institute of Scientific and Technical Information of China (English)

    LIU Ju; LI Yong-jian

    2006-01-01

    Emerging technologies are now initiating new industries and transforming old ones with tremendous power. They are different games compared with established technologies with distinctive characteristics of knowledge management in knowledge-based and technological-innovation-based competition. How to obtain knowledge advantage and enhance competences by knowledge sharing for emerging-technology-based strategic alliances (ETBSA) is what we concern in this paper. On the basis of our previous work on emerging technologies'distinctive attributes, we counter the wide spread presumption that the primary purpose of strategic alliances is knowledge acquiring by means of learning. We offers new insight into the knowledge sharing approaches of ETBSAs - the knowledge integrating approach by which each member firm integrates its partner's complementary knowledge base into the products and services and maintains its own knowledge specialization at the same time. So that ETBSAs should plan and practice their knowledge sharing strategies from the angle of knowledge integrating rather than knowledge acquiring. A four-dimensional framework is developed to analyze the advantages and disadvantages of these two knowledge sharing approaches. Some cases in electronic industry are introduced to illustrate our point of view.

  8. Superior Hiking Trail

    Data.gov (United States)

    Minnesota Department of Natural Resources — Superior Hiking Trail main trail, spurs, and camp spurs for completed trail throughout Cook, Lake, St. Louis and Carlton counties. These data were collected with...

  9. Bathymetry of Lake Superior

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Bathymetry of Lake Superior has been compiled as a component of a NOAA project to rescue Great Lakes lake floor geological and geophysical data and make it more...

  10. Superior Hiking Trail Facilities

    Data.gov (United States)

    Minnesota Department of Natural Resources — Superior Hiking Trail main trail, spurs, and camp spurs for completed trail throughout Cook, Lake, St. Louis and Carlton counties. These data were collected with...

  11. Gender differences in technology acceptance in selected South African companies: Implications for electronic learning

    Directory of Open Access Journals (Sweden)

    Willie T. Chinyamurindi

    2010-03-01

    Full Text Available Orientation: Technology enhanced training is becoming popular as a means for the training of soft skills, especially in work-related environments. Men and women who use this type of training encounter some challenges with regard to their usage.Research: The objective of this study was to investigate trainees’ acceptance of electronic coursework as an instruction and learning technique in various industries in the South African context.Motivation for the study: A persistent gender imbalance in the South African work-place has been noted to exist chiefly in the Science, Engineering and Technology (SET sectors, areas that have an important bearing on South Africa’s global competitiveness. This study explores how gender imbalance manifests in terms of trainee acceptance of electronic coursework.Research design, approach and method: A cross-sectional survey design was used. A survey was conducted amongst 191 employees in the SET sector. The measuring instrument used was the Technology Acceptance Instrument (TAI and included measures of Computer Self-Efficacy (CSE, Perceived Ease of Use (PEU, Perceived Usefulness (PU and Behavioural Intention to Use (BI.Main findings: Women ratings of the TAI to use the electronic coursework were slightly higher than men’s ratings. Multiple regression analyses were also carried out to measure the variation in the level of influence with gender as a predictor variable. The results showed that compared to women, men had a lower salient effect of elements of the TAI, notably, CSE–PU; PU–BI and BI–PEU. However, compared to men, women had a higher salient effect in terms of the relationship between CSE–PU and PU–PEU.Practical implications: The implication of the results is that interventions that focus on the human resources development of employees using electronic coursework (namely, CSE, PEU, PU and BI are worth considering as they influence the acceptance of the interventions.Contribution/value-add: The

  12. Realization of a universal patient identifier for electronic medical records through biometric technology.

    Science.gov (United States)

    Leonard, D C; Pons, Alexander P; Asfour, Shihab S

    2009-07-01

    The technology exists for the migration of healthcare data from its archaic paper-based system to an electronic one, and, once in digital form, to be transported anywhere in the world in a matter of seconds. The advent of universally accessible healthcare data has benefited all participants, but one of the outstanding problems that must be addressed is how the creation of a standardized nationwide electronic healthcare record system in the United States would uniquely identify and match a composite of an individual's recorded healthcare information to an identified individual patients out of approximately 300 million people to a 1:1 match. To date, a few solutions to this problem have been proposed that are limited in their effectiveness. We propose the use of biometric technology within our fingerprint, iris, retina scan, and DNA (FIRD) framework, which is a multiphase system whose primary phase is a multilayer consisting of these four types of biometric identifiers: 1) fingerprint; 2) iris; 3) retina scan; and 4) DNA. In addition, it also consists of additional phases of integration, consolidation, and data discrepancy functions to solve the unique association of a patient to their medical data distinctively. This would allow a patient to have real-time access to all of their recorded healthcare information electronically whenever it is necessary, securely with minimal effort, greater effectiveness, and ease.

  13. Laser microprocessing technologies for automotive, flexible electronics, and solar energy sectors

    Science.gov (United States)

    Nikumb, Suwas; Bathe, Ravi; Knopf, George K.

    2014-10-01

    Laser microprocessing technologies offer an important tool to fulfill the needs of many industrial sectors. In particular, there is growing interest in applications of these processes in the manufacturing areas such as automotive parts fabrication, printable electronics and solar energy panels. The technology is primarily driven by our understanding of the fundamental laser-material interaction, process control strategies and the advancement of significant fabrication experience over the past few years. The wide-ranging operating parameters available with respect to power, pulse width variation, beam quality, higher repetition rates as well as precise control of the energy deposition through programmable pulse shaping technologies, enables pre-defined material removal, selective scribing of individual layer within a stacked multi-layer thin film structure, texturing of material surfaces as well as precise introduction of heat into the material to monitor its characteristic properties are a few examples. In this research, results in the area of laser surface texturing of metals for added hydrodynamic lubricity to reduce friction, processing of ink-jet printed graphene oxide for flexible printed electronic circuit fabrication and scribing of multi-layer thin films for the development of photovoltaic CuInGaSe2 (CIGS) interconnects for solar panel devices will be discussed.

  14. Fully Scaled 0.5 Micron CMOS Technology Using Variable Shaped Electron Beam Lithography

    Science.gov (United States)

    Coane, Philip; Rudeck, Paul; Wang, Li-Kong; Wilson, Alan; Hohn, Fritz

    1988-06-01

    Over the past several years, CMOS technology has been continuously driven to achieve enhanced performance and higher density. The resulting reduction in semiconductor dimensions has surpasssed the limits attainable by the most advanced optical lithography tools. As a result, the utilization of electron beam lithography direct writing techniques to satisfy VLSI patterning requirements has increased significantly. In principle, variable shaped electron beam systems are capable of writing linewidths down to at least 0.1 micron. However, the successful application of sub-micron scaling principles to device fabrication involves an integration of tool capability and resist process control. In order to achieve the realization of improved CMOS device performance and circuit density, sub-micron ground rules (line width control and overlay) must be satisfied over the full chip. This paper reports on a high performance, fully scaled 0.5 micron CMOS technology developed for VLSI appli-cations. Significant gains in both density and performance at reduced power supply levels are realized over previously reported 1.0 micron technology. The details of the integrated lithography strategy used to achieve these results are presented.

  15. Carbon phosphide monolayers with superior carrier mobility

    Science.gov (United States)

    Wang, Gaoxue; Pandey, Ravindra; Karna, Shashi P.

    2016-04-01

    Two dimensional (2D) materials with a finite band gap and high carrier mobility are sought after materials from both fundamental and technological perspectives. In this paper, we present the results based on the particle swarm optimization method and density functional theory which predict three geometrically different phases of the carbon phosphide (CP) monolayer consisting of sp2 hybridized C atoms and sp3 hybridized P atoms in hexagonal networks. Two of the phases, referred to as α-CP and β-CP with puckered or buckled surfaces are semiconducting with highly anisotropic electronic and mechanical properties. More remarkably, they have the lightest electrons and holes among the known 2D semiconductors, yielding superior carrier mobility. The γ-CP has a distorted hexagonal network and exhibits a semi-metallic behavior with Dirac cones. These theoretical findings suggest that the binary CP monolayer is a yet unexplored 2D material holding great promise for applications in high-performance electronics and optoelectronics.Two dimensional (2D) materials with a finite band gap and high carrier mobility are sought after materials from both fundamental and technological perspectives. In this paper, we present the results based on the particle swarm optimization method and density functional theory which predict three geometrically different phases of the carbon phosphide (CP) monolayer consisting of sp2 hybridized C atoms and sp3 hybridized P atoms in hexagonal networks. Two of the phases, referred to as α-CP and β-CP with puckered or buckled surfaces are semiconducting with highly anisotropic electronic and mechanical properties. More remarkably, they have the lightest electrons and holes among the known 2D semiconductors, yielding superior carrier mobility. The γ-CP has a distorted hexagonal network and exhibits a semi-metallic behavior with Dirac cones. These theoretical findings suggest that the binary CP monolayer is a yet unexplored 2D material holding great

  16. Towards high speed inkjet printed electronics - Technology transfer from S2S to R2R production

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.; Geijn, S. van de; Groen, P.

    2013-01-01

    An economically successful implementation of printed electronics technologies in industrial production processes requires high throughput and large scale compatible manufacturing techniques. Roll-to-roll inkjet printing and photonic sintering of metal-based conductive inks on flexible plastic substr

  17. DOE FreedomCAR and vehicle technologies program advanced power electronic and electrical machines annual review report

    Energy Technology Data Exchange (ETDEWEB)

    Olszewski, Mitch [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2006-10-11

    This report is a summary of the Review Panel at the FY06 DOE FreedomCAR and Vehicle Technologies (FCVT) Annual Review of Advanced Power Electronics and Electric Machine (APEEM) research activities held on August 15-17, 2006.

  18. Towards high speed inkjet printed electronics - Technology transfer from S2S to R2R production

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.; Geijn, S. van de; Groen, P.

    2013-01-01

    An economically successful implementation of printed electronics technologies in industrial production processes requires high throughput and large scale compatible manufacturing techniques. Roll-to-roll inkjet printing and photonic sintering of metal-based conductive inks on flexible plastic

  19. Application of FPGA technology for control of superconducting TESLA cavities in free electron laser

    Science.gov (United States)

    Pozniak, Krzysztof T.

    2006-10-01

    Contemporary fundamental research in physics, biology, chemistry, pharmacology, material technology and other uses frequently methods basing on collision of high energy particles or penetration of matter with ultra-short electromagnetic waves. Kinetic energy of involved particles, considerably greater than GeV, is generated in accelerators of unique construction. The paper presents a digest of working principles of accelerators. There are characterized research methods which use accelerators. A method to stabilize the accelerating EM field in superconducting (SC) resonant cavity was presented. An example was given of usage of TESLA cavities in linear accelerator propelling the FLASH free electron laser (FEL) in DESY, Hamburg. Electronic and photonic control system was debated. The system bases on advanced FPGA circuits and cooperating fast DSP microprocessor chips. Examples of practical solutions were described. Test results of the debated systems in the real-time conditions were given.

  20. FEATURES OF TECHNOLOGIES CREATE INTERACTIVE ELECTRONIC DOCUMENT FOR SUPPORT OF LABORATORY PRACTICAL PHYSICS

    Directory of Open Access Journals (Sweden)

    Mykola A. Meleshko

    2014-02-01

    Full Text Available The article discusses the content of the «flash-book» construct, defining its properties and possible components. There are presented some examples of components programming steps of “authoring flash – book”, considered the possibility of using such an electronic document to optimize the learning process at the Technical University in the performance of laboratory training on general physics. The technique of its using to provide individualized approach to learning and the use of various experimental base from classical to digital equipment laboratories is proposed. It was carried out the analysis of ways to improve such interactive electronic document for the development of information technology competence of engineering students.

  1. Electronic game: A key effective technology to promote behavioral change in cancer patients

    Directory of Open Access Journals (Sweden)

    Reza Safdari

    2016-01-01

    Full Text Available Cancer diagnosis is a very unpleasant and unbelievable experience. Appropriate management and treatment of these diseases require a high degree of patient engagement. Interactive health electronic games are engaging, fun, challenging, and experiential and have the potential to change the attitude and behavior, which can improve the player's health. The use of these digital tools, as one of the most attractive and entertaining modern technologies, canem power patients, provide suitable palliative care, promote health behavior change strategies, increase patient engagement, enhance healthy lifestyle habits, improve self.management, and finally improve the quality of life of the patients. Finally, the aim of this article was to describe electronic games and their effects on the promotion of behavior change in cancer patients. In addition, this article describes categories, characteristic features, and benefits of this digital media in the lifestyle modification of cancer patients.

  2. Electronic game: A key effective technology to promote behavioral change in cancer patients.

    Science.gov (United States)

    Safdari, Reza; Ghazisaeidi, Marjan; Goodini, Azadeh; Mirzaee, Mahboobeh; Farzi, Jebraeil

    2016-01-01

    Cancer diagnosis is a very unpleasant and unbelievable experience. Appropriate management and treatment of these diseases require a high degree of patient engagement. Interactive health electronic games are engaging, fun, challenging, and experiential and have the potential to change the attitude and behavior, which can improve the player's health. The use of these digital tools, as one of the most attractive and entertaining modern technologies, canem power patients, provide suitable palliative care, promote health behavior change strategies, increase patient engagement, enhance healthy lifestyle habits, improve self.management, and finally improve the quality of life of the patients. Finally, the aim of this article was to describe electronic games and their effects on the promotion of behavior change in cancer patients. In addition, this article describes categories, characteristic features, and benefits of this digital media in the lifestyle modification of cancer patients.

  3. Graphene/MoS2 hybrid technology for large-scale two-dimensional electronics.

    Science.gov (United States)

    Yu, Lili; Lee, Yi-Hsien; Ling, Xi; Santos, Elton J G; Shin, Yong Cheol; Lin, Yuxuan; Dubey, Madan; Kaxiras, Efthimios; Kong, Jing; Wang, Han; Palacios, Tomás

    2014-06-11

    Two-dimensional (2D) materials have generated great interest in the past few years as a new toolbox for electronics. This family of materials includes, among others, metallic graphene, semiconducting transition metal dichalcogenides (such as MoS2), and insulating boron nitride. These materials and their heterostructures offer excellent mechanical flexibility, optical transparency, and favorable transport properties for realizing electronic, sensing, and optical systems on arbitrary surfaces. In this paper, we demonstrate a novel technology for constructing large-scale electronic systems based on graphene/molybdenum disulfide (MoS2) heterostructures grown by chemical vapor deposition. We have fabricated high-performance devices and circuits based on this heterostructure, where MoS2 is used as the transistor channel and graphene as contact electrodes and circuit interconnects. We provide a systematic comparison of the graphene/MoS2 heterojunction contact to more traditional MoS2-metal junctions, as well as a theoretical investigation, using density functional theory, of the origin of the Schottky barrier height. The tunability of the graphene work function with electrostatic doping significantly improves the ohmic contact to MoS2. These high-performance large-scale devices and circuits based on this 2D heterostructure pave the way for practical flexible transparent electronics.

  4. GAPDH and β-actin protein decreases with aging, making Stain-Free technology a superior loading control in Western blotting of human skeletal muscle

    DEFF Research Database (Denmark)

    Vigelsø Hansen, Andreas; Dybboe, Rie; Hansen, Christina Neigaard

    2015-01-01

    physiology where the intervention has been suggested to impede normalization (ageing, muscle atrophy, and different muscle fiber type composition). The linearity of signal and the methodological variation coefficient was obtained. Furthermore, the inter- and intraindividual variation in signals obtained from...... SF and RP was measured in relation to ageing, muscle atrophy, and different muscle fiber type composition, respectively. A stronger linearity of SF and β-actin compared with GAPDH and α-tubulin was observed. The methodological variation was relatively low in all four methods (4-11%). Protein level...... and differences in muscle fiber type. The novel SF technology adds lower variation to the results compared with the existing methods for correcting for loading inaccuracy in Western blotting of human skeletal muscle in applied physiology....

  5. Technology modules from micro- and nano-electronics for the life sciences.

    Science.gov (United States)

    Birkholz, M; Mai, A; Wenger, C; Meliani, C; Scholz, R

    2016-05-01

    The capabilities of modern semiconductor manufacturing offer remarkable possibilities to be applied in life science research as well as for its commercialization. In this review, the technology modules available in micro- and nano-electronics are exemplarily presented for the case of 250 and 130 nm technology nodes. Preparation procedures and the different transistor types as available in complementary metal-oxide-silicon devices (CMOS) and BipolarCMOS (BiCMOS) technologies are introduced as key elements of comprehensive chip architectures. Techniques for circuit design and the elements of completely integrated bioelectronics systems are outlined. The possibility for life scientists to make use of these technology modules for their research and development projects via so-called multi-project wafer services is emphasized. Various examples from diverse fields such as (1) immobilization of biomolecules and cells on semiconductor surfaces, (2) biosensors operating by different principles such as affinity viscosimetry, impedance spectroscopy, and dielectrophoresis, (3) complete systems for human body implants and monitors for bioreactors, and (4) the combination of microelectronics with microfluidics either by chip-in-polymer integration as well as Si-based microfluidics are demonstrated from joint developments with partners from biotechnology and medicine. WIREs Nanomed Nanobiotechnol 2016, 8:355-377. doi: 10.1002/wnan.1367 For further resources related to this article, please visit the WIREs website.

  6. 17种攀援植物良种繁殖栽培及配置应用技术%Applied Technology of Propagation Cultivation and Configuration of 17 Kinds of Superior Varieties Climbing Plants

    Institute of Scientific and Technical Information of China (English)

    黎兆海

    2012-01-01

    详细地分析了"柳州市攀援植物筛选及其配置应用研究"筛选出的17优良攀援植物品种的繁殖、栽培、配置应用以及病虫害防治等技术,指出了这些良种可在广西柳州及相应地区推广应用。%This paper gives detailed description of the selection of 17 kinds of superior varieties climbing plants and of studying the technologies of propagation cultication,configuration and pest control,so as to promote the use of these seeds in Liuzhou and other corresponding areas in Guangxi.

  7. 汽车电子技术的发展与应用%Development and application of automobile electronic technology

    Institute of Scientific and Technical Information of China (English)

    蔡舒; 牟明朗

    2012-01-01

      In recent years, with the continuous development of the automotive industry and electronics industry, electronic technology used widely in modern cars, more automotive electronic control systems emerged constantly. Automobile electronic technology applications greatly improved the performance of the car in energy saving, safety, comfort, and other aspects. The application of electronic technology and development of automobile were introduced, the present situation of the application of electronic technology was comprehensively analyzed, and based on above, the automobile electronic technology development tendency and direction were put forward.%  近年来,随着汽车工业与电子工业的不断发展,电子技术在现代汽车上的应用越来越广泛,更多的汽车电子控制系统不断出现。汽车电子技术的应用极大地改善了汽车在节能、安全、舒适等方面的性能。文章介绍了汽车电子技术的应用与发展历程,全面分析了汽车电子技术的应用现状,并在此基础上,提出了汽车电子技术的发展趋势与方向。

  8. The Ef fects of Technology Usabilitiy and Individual Technology Readiness on Utilization of Electronic Document Management System (EDMS: A Research on Employee of University Hospital

    Directory of Open Access Journals (Sweden)

    Asuman Atilla

    2015-06-01

    Full Text Available Electronic Document Management System (EDMS is software which is utilized for writing, sending and storing, briefly managing the processes and operations of the corporations and institutions. In this empirical research, the statistical differences are investigated between users’ concerns about usability of mentioned technology, users’ technological readiness levels and users’ utilization status of EDMS sample is formed by 189 administrative staff of a university hospital in Ankara. According to findings, significant statistical differences are found between some dimensions of technology usability (usability effectiveness, learnability,helpfulness satisfaction, some dimensions of technology readiness (discomfort and insecurity and the utilization status (user, nonuser of EDMS.

  9. Using "Electronic Portfolios" to Challenge Current Orthodoxies in the Presentation of an Initial Teacher Training Design and Technology Activity

    Science.gov (United States)

    Spendlove, David

    2006-01-01

    The paper examines the extent to which a University undergraduate curriculum initiative provided initial teacher trainees with opportunities to challenge orthodox design methodologies through the production of an electronic portfolio within and extended design and technology activity. It was found that the "electronic portfolio" served primarily…

  10. Exploring the Use of Electronic Mobile Technologies among Distance Learners in Rural Communities for Safe and Disruptive Learning

    Science.gov (United States)

    Ntloedibe-Kuswani, Gomang Seratwa

    2013-01-01

    Several studies indicated the potential of electronic mobile technologies in reaching (safe learning) under-served communities and engaging (disruptive learning) disadvantaged peoples affording them learning experiences. However, the potential benefits of (electronic mobile learning) e-mobile learning have not been well understood from the…

  11. The Impact of Electronic Educational Technology on Ninth Grade At-Risk Reading Students: A Quantitative Investigation of Reading Achievement

    Science.gov (United States)

    Harris, Darcel

    2010-01-01

    Over 50% of American public school students read below average literacy levels. Recent research suggests that oral and print-based high school curriculum instruction require an infusion of electronic educational technology (EET), such as computer programs, online instruction, electronic thesaurus, and other devices, to better serve student need…

  12. Exploring the Use of Electronic Mobile Technologies among Distance Learners in Rural Communities for Safe and Disruptive Learning

    Science.gov (United States)

    Ntloedibe-Kuswani, Gomang Seratwa

    2013-01-01

    Several studies indicated the potential of electronic mobile technologies in reaching (safe learning) under-served communities and engaging (disruptive learning) disadvantaged peoples affording them learning experiences. However, the potential benefits of (electronic mobile learning) e-mobile learning have not been well understood from the…

  13. PERSISTENT LEFT SUPERIOR VENACAVA

    Directory of Open Access Journals (Sweden)

    Devinder Singh

    2014-05-01

    Full Text Available A Persistent Left Superior Venacava (PLSVC is the most common variation of the thoracic venous system and rare congenital vascular anomaly and is prevalent in 0.3% of the population. It may be associated with other cardiovascular abnormalities including atrial septal defect, bicuspid aortic valve, coarctation of aorta, coronary sinus ostial atresia, and cor triatriatum. Incidental rotation of a dilated coronary sinus on echocardiography should raise the suspicion of PLSVC. The diagnosis should be confirmed by saline contrast echocardiography. Condition is usually asymptomatic. Here we present a rare case of persistent left superior vena cava presented in OPD with dyspnoea & palpitations.

  14. 32-element beta detector developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecki, Maciej; Yakushev, Alexander; Bar, Jan; Budzyński, Tadeusz; Grabiec, Piotr; Kłos, Helena; Panas, Andrzej; Słysz, Wojciech; Stolarski, Maciej; Szmigiel, Dariusz; Wegrzecka, Iwona; Zaborowski, Michał

    2014-08-01

    The paper presents the design, technology and parameters of a new .silicon detector for detection of electrons (below named as beta detector) developed at the Institute of Electron Technology (ITE). The detector will be used for research on transactinide elements at the GSI Helmholtzzentrum für Schwerionenforschung GmbH, Darmstadt (GSI). The detector consists of a monolithic 32-element array with an active area diameter of 90 mm and a thickness of 0.9 mm. The starting material is a high-resistivity ν silicon wafer (5 kΩcm resistivity). 32 planar p+-ν junctions are formed by boron diffusion on the top side of the wafer. On the bottom side, an n+ region, which forms a common cathode, is formed on the entire surface by phosphorus diffusion. The array is mounted on a special epoxy-glass laminate substrate, copper-clad on both sides. Two model detectors have been fabricated and studied. Very good electrical parameters have been achieved. For the first array, with supply voltage VR = 20 V, the minimum dark current was 8 nA, the maximum dark current 97.1 nA, and the average dark current 25.1 nA. For the second array, it was 11.5 nA, 378.8 nA and 40.0 nA respectively.

  15. Application and development of ion-source technology for radiation-effects testing of electronics

    Science.gov (United States)

    Kalvas, T.; Javanainen, A.; Kettunen, H.; Koivisto, H.; Tarvainen, O.; Virtanen, A.

    2017-09-01

    Studies of heavy-ion induced single event effect (SEE) on space electronics are necessary to verify the operation of the components in the harsh radiation environment. These studies are conducted by using high-energy heavy-ion beams to simulate the radiation effects in space. The ion beams are accelerated as so-called ion cocktails, containing several ion beam species with similar mass-to-charge ratio, covering a wide range of linear energy transfer (LET) values also present in space. The use of cocktails enables fast switching between beam species during testing. Production of these high-energy ion cocktails poses challenging requirements to the ion sources because in most laboratories reaching the necessary beam energies requires very high charge state ions. There are two main technologies producing these beams: The electron beam ion source EBIS and the electron cyclotron resonance ion source ECRIS. The EBIS is most suitable for pulsed accelerators, while ECRIS is most suitable for use with cyclotrons, which are the most common accelerators used in these applications. At the Accelerator Laboratory of the University of Jyväskylä (JYFL), radiation effects testing is currently performed using a K130 cyclotron and a 14 GHz ECRIS at a beam energy of 9.3 MeV/u. A new 18 GHz ECRIS, pushing the limits of the normal conducting ECR technology is under development at JYFL. The performances of existing 18 GHz ion sources have been compared, and based on this analysis, a 16.2 MeV/u beam cocktail with 1999 MeV 126Xe44+ being the most challenging component to has been chosen for development at JYFL. The properties of the suggested beam cocktail are introduced and discussed.

  16. A Brief Review on Metamaterial-Based Vacuum Electronics for Terahertz and Microwave Science and Technology

    Science.gov (United States)

    Matsui, Tatsunosuke

    2017-09-01

    Metamaterials, which enable us to realize novel physical effects that cannot be achieved using natural materials, have been extensively studied in recent years and significant progress has been made, especially in the field of optics. This game-changing concept has also initiated a rich variety of research activity in vacuum electronics. Here we review the recent development of metamaterial-based vacuum electronics for terahertz (THz) and microwave science and technology. The reversed Cherenkov radiation (RCR) in double-negative (DNG) metamaterials predicted by Veselago back in the 1960s has been experimentally verified in the microwave frequency range by utilizing specially designed DNG metamaterials. The interaction of an electron beam (e-beam) with DNG metamaterials may lead to the realization of novel applications such as microwave and THz radiation sources, accelerators, and even the visualization of invisibility cloaks. Smith-Purcell radiation (SPR) has recently received renewed interest owing to the development of metamaterials and the concept of spoof surface plasmon polaritons, as discussed in this review, and recent results on e-beam-induced directional and wide-band THz radiation with sharp multiple peaks from a graded grating, as well as directional and monochromatic special SPR and their possible application to THz orotron devices, are also reviewed.

  17. Selected Application of Electron Beams in Solid State Materials and Devies Technology

    Directory of Open Access Journals (Sweden)

    S. C. Jain

    1980-04-01

    Full Text Available Experimental work on electron beam annealing of implanted or diffused semiconductor layers is reviewed. In the pulsed beam annealing technique, the top layer of the semiconductor melts and regrows epitaxially. All dopant atoms are frozen in electrically active state during this process. The point defects and clusters caused by radiation damage are completely annealed out. The bulk of the material remains unaffected as its temperature does not rise by more than a few degrees. In the CW electron beam annealing, the layer does not melt but due to sharp temperature gradient and high temperature of the layer, the growth of solid phase epitaxial layer is induced. However, a part of the dopant atoms may remain electrically inactive in this process of annealing. The pulsed beam annealing has also been used for growing high quality single crystal layers of germanium on silicon substrate. Recently, a new technology has been developed to grow silicon single crystal layers on amorphous substrates. Recent advances in the method of determination of lifetime using electron beams are also discussed.

  18. 数字电子技术分析及其应用%Analysis and Application of Digital Electronic Technology

    Institute of Scientific and Technical Information of China (English)

    左平

    2015-01-01

    Under the background of the rapid development of modern science and technology, digital electronic technology has been well developed, it has become the development trend of the electronic technology, application and demand in the market continues to expand, the importance of the increasingly prominent. The general situation of digital electronic technology is studied and analyzed, and the application of digital electronic technology is discussed, in order to give full play to the value of digital electronic technology, and promote its smooth development.%在当今科学技术快速发展的背景下,数字化电子技术得到了较好的发展,其已成为电子技术的发展趋势,在市场中的应用与需求不断扩大,重要性逐渐凸显。对数字电子技术的概况进行了研究和分析,并探讨了数字电子技术的应用,以便充分发挥数字电子技术的应用价值,促进其顺利发展。

  19. Implementing unique device identification in electronic health record systems: organizational, workflow, and technological challenges.

    Science.gov (United States)

    Campion, Thomas R; Johnson, Stephen B; Paxton, Elizabeth W; Mushlin, Alvin I; Sedrakyan, Art

    2014-01-01

    The United States Food and Drug Administration (FDA) has proposed creating a unique device identification (UDI) system for medical devices to facilitate postmarket surveillance, quality improvement, and other applications. Although a small number of health care institutions have implemented initiatives comparable with the proposed UDI system by capturing data in electronic health record (EHR) systems, it is unknown whether institutions with fewer resources will be able to similarly implement UDI. This paper calls attention to organizational, workflow, and technological challenges in UDI system implementation by drawing from the literature on EHR and clinical research systems implementation. Organizational challenges for UDI system implementation include coordinating multiple stakeholders to define UDI attributes and characteristics for use in EHRs, guiding organizational change within individual institutions for integrating UDI with EHRs, and guiding organizational change for reusing UDI data captured in EHRs. Workflow challenges include capturing UDI data in EHRs using keyboard entry and barcode scanning. Technological challenges involve interfacing UDI data between EHRs and surgical information systems, transforming UDI and related patient data from EHRs for research, and applying data standards to UDI within and beyond EHRs. We provide recommendations for regulations, organizational sharing, and professional society engagement to raise awareness of and overcome UDI system implementation challenges. Implementation of the UDI system will require integration of people, process, and technology to achieve benefits envisioned by FDA, including improved postmarket device surveillance and quality of care.

  20. Compatibility of Radiofrequency Surgical Sponge Detection Technology with Cardiac Implantable Electronic Devices and Temporary Pacemakers.

    Science.gov (United States)

    Salcedo, Jonathan D; Pretorius, Victor G; Hsu, Jonathan C; Lalani, Gautam G; Schricker, Amir A; Hebsur, Shrinivas M; McGARRY, Thomas J; Hunter, Jessica A; Lewis, Kathryn E; Krummen, David E; Feld, Gregory K; Birgersdotter-Green, Ulrika

    2016-11-01

    Radiofrequency (RF) technology has improved detection of retained surgical sponges with a reported 100% sensitivity and specificity. However, the potential for interactions of the RF signals emitted by the detection system with cardiac implantable electronic devices (CIEDs) or temporary pacemakers may limit its use in those patients with these devices. This study investigated whether RF detection technology causes interference or clinically significant changes in the programmed settings of implanted pacemakers and defibrillators or temporary epicardial pacemakers. Fifty patients who were scheduled either for CIED removal or placement of a temporary epicardial pacemaker (at the time of open heart surgery) were recruited for this study. Device settings and measurements from separate interrogations before and after scanning with the RF detection system were compared. For the temporary pacemakers, we observed for any changes in hemodynamics or signs of pacing interference. Twenty (40%) pacemakers, 20 (40%) implantable cardioverter defibrillators, and 10 (20%) temporary pacemakers were analyzed in this study. During scanning, no signal interference was detected in any permanent device, and there were no significant changes in programmed settings after scanning with the RF detection system. However, pacing inhibition was detected with temporary pacing systems when programmed to a synchronous mode (DDD). RF detection technology can be safely used to scan for retained surgical sponges in patients with permanent CIEDs and temporary pacemakers set to asynchronous mode. © 2016 Wiley Periodicals, Inc.

  1. Genetic data and electronic health records: a discussion of ethical, logistical and technological considerations

    Science.gov (United States)

    Shoenbill, Kimberly; Fost, Norman; Tachinardi, Umberto; Mendonca, Eneida A

    2014-01-01

    Objective The completion of sequencing the human genome in 2003 has spurred the production and collection of genetic data at ever increasing rates. Genetic data obtained for clinical purposes, as is true for all results of clinical tests, are expected to be included in patients’ medical records. With this explosion of information, questions of what, when, where and how to incorporate genetic data into electronic health records (EHRs) have reached a critical point. In order to answer these questions fully, this paper addresses the ethical, logistical and technological issues involved in incorporating these data into EHRs. Materials and methods This paper reviews journal articles, government documents and websites relevant to the ethics, genetics and informatics domains as they pertain to EHRs. Results and discussion The authors explore concerns and tasks facing health information technology (HIT) developers at the intersection of ethics, genetics, and technology as applied to EHR development. Conclusions By ensuring the efficient and effective incorporation of genetic data into EHRs, HIT developers will play a key role in facilitating the delivery of personalized medicine. PMID:23771953

  2. Os Centros Federais de Educação Tecnológica e o ensino superior: duas lógicas em confronto The federal centers of technological education and higher education: two confronting logics

    Directory of Open Access Journals (Sweden)

    Maria Ciavatta

    2006-10-01

    Full Text Available O sentido educacional que os Centros Federais de Educação Tecnológica assumem ao se tornarem, progressivamente, instituições de ensino superior, exige que se defina que ser humano se quer formar e a que finalidades se destina a educação. Cabe ainda uma reflexão sobre a questão da técnica, da ciência e da tecnologia e sua relação com o trabalho e a educação. Tendo como horizonte uma visão de totalidade social dos fenômenos, nas múltiplas relações que estabelecem, portanto, na sua complexidade, trataremos do tema proposto em sua dimensão histórica e política. Primeiro, refletimos sobre o significado da técnica e sua relação com o conhecimento, a ciência e as tecnologias. A seguir, trataremos dos termos cidadão produtivo e/ou emancipado e da estrutura social brasileira e suas grandes desigualdades. Por último, da questão da universidade, da produção do conhecimento e de sua relação com o ensino médio e a formação de tecnólogos em nível superior.As the Federal Centers of Technological Education gradually become higher education institutions the educational meaning they assume requires a definition of which human being we want to form and what purposes education serves. A reflection about the issue of technique, science and technology and their relation to work and education is also needed. Seeking a vision of social totality of the phenomena, in their multiple relations, therefore, in their complexity, we tackle the proposed subject in its historical and political dimension. We first reflect on the meaning of technique and its relation to knowledge, science and technologies. We then approach the terms productive and/or emancipated citizen and the Brazilian social structure, marked by great inequalities. Finally, we raise the issues of universities and production of knowledge and their relation to senior high school and the education of technologists on a higher level.

  3. Leveraging electronic healthcare record standards and semantic web technologies for the identification of patient cohorts.

    Science.gov (United States)

    Fernández-Breis, Jesualdo Tomás; Maldonado, José Alberto; Marcos, Mar; Legaz-García, María del Carmen; Moner, David; Torres-Sospedra, Joaquín; Esteban-Gil, Angel; Martínez-Salvador, Begoña; Robles, Montserrat

    2013-12-01

    The secondary use of electronic healthcare records (EHRs) often requires the identification of patient cohorts. In this context, an important problem is the heterogeneity of clinical data sources, which can be overcome with the combined use of standardized information models, virtual health records, and semantic technologies, since each of them contributes to solving aspects related to the semantic interoperability of EHR data. To develop methods allowing for a direct use of EHR data for the identification of patient cohorts leveraging current EHR standards and semantic web technologies. We propose to take advantage of the best features of working with EHR standards and ontologies. Our proposal is based on our previous results and experience working with both technological infrastructures. Our main principle is to perform each activity at the abstraction level with the most appropriate technology available. This means that part of the processing will be performed using archetypes (ie, data level) and the rest using ontologies (ie, knowledge level). Our approach will start working with EHR data in proprietary format, which will be first normalized and elaborated using EHR standards and then transformed into a semantic representation, which will be exploited by automated reasoning. We have applied our approach to protocols for colorectal cancer screening. The results comprise the archetypes, ontologies, and datasets developed for the standardization and semantic analysis of EHR data. Anonymized real data have been used and the patients have been successfully classified by the risk of developing colorectal cancer. This work provides new insights in how archetypes and ontologies can be effectively combined for EHR-driven phenotyping. The methodological approach can be applied to other problems provided that suitable archetypes, ontologies, and classification rules can be designed.

  4. Effect of Electronic Interactive Technologies Usage on Services Marketing Activities Empirical Study on Banking Sector in Jordan

    Directory of Open Access Journals (Sweden)

    Zakaria A. Azzam

    2010-06-01

    Full Text Available The importance of new technology in marketing of financial services can't be ignored. Interactive technology helpsmarketers to inexpensively engage consumers in one- to- one relationships fueled by two way conversation via mouse click oncomputer. Several organizations especially in services businesses are increasingly strengthening their marketing function byeffectively interacting with their customers with the help of sophisticated interactive technologies in an integrated manner.Enough research in the usage or adoption of electronic data interchange (EDI can be found both in information systems andmarketing literature. Therefore; it appears that different interactive technologies have been studied individually by differentresearchers. This motivates researchers to find out studies related to interactive technologies and their usage or adoptionespecially in the field of marketing activities in a developing country like Jordan. This paper attempts to understand the effectof the usage of interactive technologies in financial services businesses with the intention to derive implications for thedevelopment of interactive technologies to suit its intended users.

  5. Air Superiority Fighter Characteristics.

    Science.gov (United States)

    1998-06-05

    many a dispute could have been deflated into a single paragraph if the disputants had just dared to define their terms.7 Aristotle ...meaningful. This section will expand on some key ideology concepts. The phrase "air superiority fighter" may bring to mind visions of fighter... biographies are useful in garnering airpower advocate theories as well as identifying key characteristics. Air campaign results, starting with World

  6. Design of fast signal processing readout front-end electronics implemented in CMOS 40 nm technology

    Science.gov (United States)

    Kleczek, Rafal

    2016-12-01

    The author presents considerations on the design of fast readout front-end electronics implemented in a CMOS 40 nm technology with an emphasis on the system dead time, noise performance and power dissipation. The designed processing channel consists of a charge sensitive amplifier with different feedback types (Krummenacher, resistive and constant current blocks), a threshold setting block, a discriminator and a counter with logic circuitry. The results of schematic and post-layout simulations with randomly generated input pulses in a time domain according to the Poisson distribution are presented and analyzed. Dead time below 20 ns is possible while keeping noise ENC ≈ 90 e- for a detector capacitance CDET = 160 fF.

  7. Japanese power electronics inverter technology and its impact on the American air conditioning industry

    Energy Technology Data Exchange (ETDEWEB)

    Ushimaru, Kenji.

    1990-08-01

    Since 1983, technological advances and market growth of inverter- driven variable-speed heat pumps in Japan have been dramatic. The high level of market penetration was promoted by a combination of political, economic, and trade policies in Japan. A unique environment was created in which the leading domestic industries-- microprocessor manufacturing, compressors for air conditioning and refrigerators, and power electronic devices--were able to direct the development and market success of inverter-driven heat pumps. As a result, leading US variable-speed heat pump manufacturers should expect a challenge from the Japanese producers of power devices and microprocessors. Because of the vertically-integrated production structure in Japan, in contrast to the out-sourcing culture of the United States, price competition at the component level (such as inverters, sensors, and controls) may impact the structure of the industry more severely than final product sales. 54 refs., 47 figs., 1 tab.

  8. The electronic image stabilization technology research based on improved optical-flow motion vector estimation

    Science.gov (United States)

    Wang, Chao; Ji, Ming; Zhang, Ying; Jiang, Wentao; Lu, Xiaoyan; Wang, Jiaoying; Yang, Heng

    2016-01-01

    The electronic image stabilization technology based on improved optical-flow motion vector estimation technique can effectively improve the non normal shift, such as jitter, rotation and so on. Firstly, the ORB features are extracted from the image, a set of regions are built on these features; Secondly, the optical-flow vector is computed in the feature regions, in order to reduce the computational complexity, the multi resolution strategy of Pyramid is used to calculate the motion vector of the frame; Finally, qualitative and quantitative analysis of the effect of the algorithm is carried out. The results show that the proposed algorithm has better stability compared with image stabilization based on the traditional optical-flow motion vector estimation method.

  9. Characterization of Fogging and Develop-Loading Effects in Electron-Beam Direct-Writing Technology

    Science.gov (United States)

    Kon, Jun-ichi; Kojima, Yoshinori; Takahashi, Yasushi; Maruyama, Takashi; Sugatani, Shinji

    2012-06-01

    We investigated long-range critical dimension (CD) error factors, such as fogging and develop loading, to improve CD uniformity in electron-beam direct-writing (EBDW) technology. It was found that the impact of both effects reached 20 mm and the CD of the monitor pattern decreased by no less than 10%. Fogging and develop loading were separated by comparing the newly designed test patterns that were exposed using both EB and a krypton-fluoride excimer laser. We confirmed that the impact of fogging and develop loading by arranging dummy patterns with a density of 40% was estimated to be +8.9 and -18.9% in the CD, respectively. Based on success in separating each effect, fogging and develop loading were decreased by applying an antistatic agent and multipuddle development, respectively.

  10. Sensing of single electrons using micro and nano technologies: a review

    Science.gov (United States)

    Jalil, Jubayer; Zhu, Yong; Ekanayake, Chandima; Ruan, Yong

    2017-04-01

    During the last three decades, the remarkable dynamic features of microelectromechanical systems (MEMS) and nanoelectromechanical systems (NEMS), and advances in solid-state electronics hold much potential for the fabrication of extremely sensitive charge sensors. These sensors have a broad range of applications, such as those involving the measurement of ionization radiation, detection of bio-analyte and aerosol particles, mass spectrometry, scanning tunneling microscopy, and quantum computation. Designing charge sensors (also known as charge electrometers) for electrometry is deemed significant because of the sensitivity and resolution issues in the range of micro- and nano-scales. This article reviews the development of state-of-the-art micro- and nano-charge sensors, and discusses their technological challenges for practical implementation.

  11. Charting the use of electronic health records and other information technologies among child health providers

    Directory of Open Access Journals (Sweden)

    Brooks Robert G

    2006-07-01

    Full Text Available Abstract Background Previous studies regarding the use of information technologies (IT specifically among pediatricians and other physicians who treat children are lacking. As such, the objective of this study is to examine the use of electronic health record (EHR systems and other IT applications among pediatricians and other child health providers (CHPs in Florida. Methods We focus on pediatricians and other CHPs who responded to a state-wide physician survey of IT use. CHPs included general pediatricians, pediatric sub-specialists, and family physicians who self-reported a practice composition of at least 20% children. We compared general pediatricians to other CHPs and all CHPs (including pediatricians to other physicians with respect to computer and internet availability, and to the use of personal digital assistants and EHRs. Those with an EHR were also compared regarding the availability of key functions available in their system. Statistical analyses included chi-square analysis and logistic regression models which controlled for numerous factors. Results A total of 4,203 surveys (28.2% response including 1,021 CHPs, were returned. General pediatricians (13.7% were significantly less likely to be using an EHR than both CHP family physicians (26.1% and pediatric sub-specialists (29.6%; p Conclusion Physicians caring for children, and especially pediatricians, in Florida, are significantly slower than other doctors to adopt EHRs, and important electronic patient safety functionalities, into their office practices.

  12. The CMS Fast Beams Condition Monitor Backend Electronics based on MicroTCA technology

    CERN Document Server

    Zagozdzinska, Agnieszka Anna

    2015-01-01

    The Fast Beams Condition Monitor (BCM1F), upgraded for LHC Run II, is one sub-system of the Beam Radiation Instrumentation and Luminosity Project of the CMS experiment. It is based on 24 single crystal CVD diamond sensors. Each sensor is metallised with two pads, being read out by a dedicated fast frontend chip produced in 130 nm CMOS technology. Signals for real time monitoring are processed by custom-made back-end electronics to measure separately rates corresponding to LHC collision products, machine induced background and residual activation exploiting different arrival times. The system is built in MicroTCA technology and uses high speed analog-to-digital converters. The data processing module designed for the FPGA allows a distinguishing of collision and machine induced background, both synchronous to the LHC clock, from the residual activation products. In operational modes of high rates, consecutive events, spaced in time by less than 12.5 ns, may partially overlap. Hence, novel signal processing tec...

  13. The Adoption and Challenges of Electronic Voting Technologies Within the South African Context

    Directory of Open Access Journals (Sweden)

    Mourine Achieng

    2013-11-01

    Full Text Available Literature has shown that countries such as Braziland India have successfully implemented electronicvoting systems and other countries are at various piloting stages to address many challenges associatedwith manual paper based system such ascosts of physical ballot paper and other overheads, electoraldelays, distribution of electoral materials, and general lack of confidence in the electoral process.It is inthis context that this study explores how South African can leverage the opportunities that e-votingpresents. Manual voting is often tedious, non-secure, and time-consuming, which leads us to think aboutusing electronic facilities to make the process more efficient. This study proposes that the adoptionofelectronic voting technologies could perhaps mitigate some of these issues and challengesin the processimproving the electoral process. The study used anon-line questionnaire which was administered to abroader group of voters and an in-depth semi-structured interview with the Independent ElectoralCommission officials. The analysis is based on thematic analysis and diffusion of innovations theory isadopted as a theoretical lens of analysis. The findings reveal that relative advantage, compatibilityandcomplexity would determine the intentions of SouthAfrican voters and the Electoral Management Bodies(IEC to adopt e-voting technologies. Moreover, thefindings also reveal several other factorsthat couldinfluence the adoption process. The study is limited to only voters in Cape Town and these voters wereexpected to have some access to the internet. The sample size limits the generalizability of the findings ofthis study.

  14. Using Technology to Improve Cancer Care: Social Media, Wearables, and Electronic Health Records.

    Science.gov (United States)

    Fisch, Michael J; Chung, Arlene E; Accordino, Melissa K

    2016-01-01

    Digital engagement has become pervasive in the delivery of cancer care. Internet- and cellular phone-based tools and systems are allowing large groups of people to engage with each other and share information. Health systems and individual health professionals are adapting to this revolution in consumer and patient behavior by developing ways to incorporate the benefits of technology for the purpose of improving the quality of medical care. One example is the use of social media platforms by oncologists to foster interaction with each other and to participate with the lay public in dialogue about science, medicine, and cancer care. In addition, consumer devices and sensors (wearables) have provided a new, growing dimension of digital engagement and another layer of patient-generated health data to foster better care and research. Finally, electronic health records have become the new standard for oncology care delivery, bringing new opportunities to measure quality in real time and follow practice patterns, as well as new challenges as providers and patients seek ways to integrate this technology along with other forms of digital engagement to produce more satisfaction in the process of care along with measurably better outcomes.

  15. Applying semantic web technologies for phenome-wide scan using an electronic health record linked Biobank

    Directory of Open Access Journals (Sweden)

    Pathak Jyotishman

    2012-12-01

    Full Text Available Abstract Background The ability to conduct genome-wide association studies (GWAS has enabled new exploration of how genetic variations contribute to health and disease etiology. However, historically GWAS have been limited by inadequate sample size due to associated costs for genotyping and phenotyping of study subjects. This has prompted several academic medical centers to form “biobanks” where biospecimens linked to personal health information, typically in electronic health records (EHRs, are collected and stored on a large number of subjects. This provides tremendous opportunities to discover novel genotype-phenotype associations and foster hypotheses generation. Results In this work, we study how emerging Semantic Web technologies can be applied in conjunction with clinical and genotype data stored at the Mayo Clinic Biobank to mine the phenotype data for genetic associations. In particular, we demonstrate the role of using Resource Description Framework (RDF for representing EHR diagnoses and procedure data, and enable federated querying via standardized Web protocols to identify subjects genotyped for Type 2 Diabetes and Hypothyroidism to discover gene-disease associations. Our study highlights the potential of Web-scale data federation techniques to execute complex queries. Conclusions This study demonstrates how Semantic Web technologies can be applied in conjunction with clinical data stored in EHRs to accurately identify subjects with specific diseases and phenotypes, and identify genotype-phenotype associations.

  16. The outlook of innovative optical-electronic technologies implementation in transportation

    Science.gov (United States)

    Shilina, Elena V.; Ryabichenko, Roman B.

    2005-06-01

    Information and telecommunication technologies (ITT) are already tool economic development of society and their role will grow. The first task is providing of information security of ITT that is necessary for it distribution in "information" society. The state policy of the leading world countries (USA, France, Japan, Great Britain and China) is focused on investment huge funds in innovative technologies development. Within the next 4-6 years the main fiber-optic transfer lines will have data transfer speed 40 Gbit/s, number of packed channels 60-200 that will provide effective data transfer speed 2,4-8 Tbit/s. Photonic-crystalline fibers will be promising base of new generation fiber-optic transfer lines. The market of information imaging devices and digital photo cameras will be grown in 3-5 times. Powerful lasers based on CO2 and Nd:YAG will be actively used in transport machinery construction when producing aluminum constructions of light rolling-stock. Light-emitting diodes (LEDs) will be base for energy saving and safety light sources used for vehicles and indoor lighting. For example, in the USA cost reducing for lighting will be 200 billion dollars. Implementation analysis of optic electronic photonic technologies (OPT) in ground and aerospace systems shows that they provide significant increasing of traffic safety, crew and passengers comfort with help of smart vehicles construction and non-contact dynamic monitoring both transport facilities (for example, wheel flanges) and condition of rail track (road surface), equipping vehicles with night vision equipment. Scientific-technical programs of JSC "RZD" propose application of OPT in new generation systems: axle-box units for coaches and freight cars monitoring when they are moved, track condition analysis, mechanical stress and permanent way irregularity detection, monitoring geometric parameters of aerial contact wire, car truck, rail and wheel pair roll surface, light signals automatic detection from

  17. CONTROL OF METAL SURFACES MACHINED IN ACCORDANCE WITH THE DIAMOND NANOMACHINING TECHNOLOGY BASED ON THE ELECTRON WORK FUNCTION

    Directory of Open Access Journals (Sweden)

    G. V. Sharonov

    2015-01-01

    Full Text Available Dimensional machining technology is based on the use of integrated geometric parameters of machined surfaces. Technological impact of a pick results in oxidation processes and changes in physic-chemical parameters of surface. Control of only geometric parameters is insufficient to describe characteristics of machining and formation of ultra-smooth surfaces. The electron work function is therefore used. The aim of the work was to study electrophysical states of optic surfaces of non-ferrous metals and alloys in relation to geometric and physic-chemical parameters according to the distribution of the electron work function over the surface. We conducted the study on experimental metal samples made of copper and aluminum alloy, machined in accordance with the diamond nanomachining technology. The diamond nanomachining technology would be capable of ensuring the roughness of non-ferrous metals and alloys machined at the level of Ra ≤ 0,005 µm. Modernized Kelvin probe was used as the registration technique of the changes of the electron work function over the surface. Dependence between the electron work function value, as well as its alteration and the physicchemical and geometric parameters of a surface has been determined. It has been shown that the diamond nanomachining technology makes it possible to obtain electro-physically uniform optical surfaces on copper and aluminum alloy with the minimal range of the distribution of the electric potential over the surface. 

  18. Contabilidad Financiera Superior

    OpenAIRE

    Ipiñazar Petralanda, Izaskun

    2013-01-01

    Duración (en horas): De 31 a 40 horas. Destinatario: Estudiante y Docente A través de este material se presentan las pautas necesarias para implementar un aprendizaje basado en problemas en la asignatura de Contabilidad Financiera Superior dentro de los temas “Constitución de S.A. y S.R.L.” (Tema 2), “Ampliaciones de Capital” (Tema 3) y “Reducciones de Capital” (Tema 4). En primer lugar se presentan las guías generales de la asignatura, y a continuación, las diferentes activida...

  19. Contabilidad Financiera Superior

    OpenAIRE

    Ipiñazar Petralanda, Izaskun

    2013-01-01

    Duración (en horas): De 31 a 40 horas. Destinatario: Estudiante y Docente A través de este material se presentan las pautas necesarias para implementar un aprendizaje basado en problemas en la asignatura de Contabilidad Financiera Superior dentro de los temas “Constitución de S.A. y S.R.L.” (Tema 2), “Ampliaciones de Capital” (Tema 3) y “Reducciones de Capital” (Tema 4). En primer lugar se presentan las guías generales de la asignatura, y a continuación, las diferentes activida...

  20. Design and simulation of cellular nonlinear networks using single-electron tunneling transistor technology

    Science.gov (United States)

    Gerousis, Costa P.

    It is currently predicted that semiconductor device scaling will end at the 22-nm device feature size (7 nm physical channel length) according to the International Technology Roadmap for Semiconductors. The main challenge is then to develop innovative technologies that will extend the scaling beyond roadmap projection. Any new technology must be well matched with complementary metal oxide semiconductor (CMOS) technology and scaleable beyond CMOS scaling projections and must provide low-power high-speed signal processing. Nanotechnology will become an appealing option for developing devices for integrated circuits with dimensions and performances well beyond roadmap predictions. Such devices, based on the controllable transfer of charge between dots or 'islands', can take advantage of the quantum mechanical effects, such as tunneling and energy quantization, which would normally occur at the nanometer scale. An outstanding challenge is in arranging such nanodevices in new architectures that can be integrated on a single chip. In particular, locally interconnected architectures are believed to be necessary to alleviate the problems associated with increasing interconnect length and complexity in ultra-dense circuits. The goal of this work is to investigate the use of nanoelectronic structures in cellular non-linear network (CNN) architectures for potential application in future high-density and low-power CMOS-nanodevice hybrid circuits. The operation of the single-electron tunneling (SET) transistor is first reviewed, followed by a discussion of simple CNN linear architectures using a SET inverter topology as the basis for the non-linear transfer characteristics for individual cells to be used in analog processing arrays for image-processing applications. The basic SET CNN cell acts as a summing node that is capacitively coupled to the inputs and outputs of nearest neighbor cells. Monte Carlo simulation results are used to show CNN-like behavior in attempting to

  1. Technology Convergence and Divergence in China's Electronic Industries: Evidence from Patents

    Institute of Scientific and Technical Information of China (English)

    CHEN Xiang-dong; LIU Xiao-qing

    2006-01-01

    By thoroughly reviewing international studies on technology convergence and divergence, four kinds of hypothesis are proposed based on patent data Herfindhal Index (HI)measurement. The main finding is that technology convergence does exist, based on patent technology records in China, primarily driven by overseas companies' strategic behavior, such as field intensiveness, competition during technology maturity session, and patent technology growth.

  2. Statistics of superior records

    Science.gov (United States)

    Ben-Naim, E.; Krapivsky, P. L.

    2013-08-01

    We study statistics of records in a sequence of random variables. These identical and independently distributed variables are drawn from the parent distribution ρ. The running record equals the maximum of all elements in the sequence up to a given point. We define a superior sequence as one where all running records are above the average record expected for the parent distribution ρ. We find that the fraction of superior sequences SN decays algebraically with sequence length N, SN˜N-β in the limit N→∞. Interestingly, the decay exponent β is nontrivial, being the root of an integral equation. For example, when ρ is a uniform distribution with compact support, we find β=0.450265. In general, the tail of the parent distribution governs the exponent β. We also consider the dual problem of inferior sequences, where all records are below average, and find that the fraction of inferior sequences IN decays algebraically, albeit with a different decay exponent, IN˜N-α. We use the above statistical measures to analyze earthquake data.

  3. Frenillo labial superior doble

    Directory of Open Access Journals (Sweden)

    Carlos Albornoz López del Castillo

    Full Text Available El frenillo labial superior doble no sindrómico es una anomalía del desarrollo que no hemos encontrado reportada en la revisión bibliográfica realizada. Se presenta una niña de 11 años de edad que fue remitida al servicio de Cirugía Maxilofacial del Hospital "Eduardo Agramonte Piña", de Camagüey, por presentar un frenillo labial superior doble de baja inserción. Se describen los síntomas clínicos asociados a esta anomalía y el tratamiento quirúrgico utilizado para su solución: una frenectomía y plastia sobre la banda muscular frénica anormal que provocaba exceso de tejido en la mucosa labial. Consideramos muy interesante la descripción de este caso, por no haber encontrado reporte similar en la literatura revisada.

  4. PREFACE: 16th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2009)

    Science.gov (United States)

    Möller, Wolfhard; Guerassimov, Nikolay; Ghelev, Chavdar

    2010-04-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977 when the series of VEIT Schools was launched by the Institute of Electronics, Bulgarian Academy of Sciences with the aim to act as a forum for interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. Beginning from 2001, the school has been jointly organized with the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Germany. Whereas, the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance grew issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions or exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers, Journal of Physics: Conference Series. The Sixteenth VEIT school was held in the Black Sea resort Sunny Beach, Bulgaria on 28 September to 2 October 2009. It was attended by close to 110 participants from 13 countries: Belgium, Bulgaria, Czech Republic, France, Germany, The Netherlands, Romania, Slovak Republic, Spain, Sweden, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, under the originality and quality criteria of acceptance by the journal, including

  5. Noise management to achieve superiority in quantum information systems

    Science.gov (United States)

    Nemoto, Kae; Devitt, Simon; Munro, William J.

    2017-06-01

    Quantum information systems are expected to exhibit superiority compared with their classical counterparts. This superiority arises from the quantum coherences present in these quantum systems, which are obviously absent in classical ones. To exploit such quantum coherences, it is essential to control the phase information in the quantum state. The phase is analogue in nature, rather than binary. This makes quantum information technology fundamentally different from our classical digital information technology. In this paper, we analyse error sources and illustrate how these errors must be managed for the system to achieve the required fidelity and a quantum superiority. This article is part of the themed issue 'Quantum technology for the 21st century'.

  6. Avanços tecnológicos na prática ortopédica: análises de membros superiores e inferiores Technological advances in orthopedics: upper and lower limbs analysis

    Directory of Open Access Journals (Sweden)

    Alberto Cliquet Júnior

    2004-03-01

    Full Text Available A Biomecânica, atualmente, é caracterizada por novos procedimentos para análise do movimento humano e por novas técnicas de medição, armazenamento e processamento de dados, contribuindo para os avanços na prática ortopédica. A temática proposta no presente trabalho baseia-se na aplicação da biomecânica ortopédica em diferentes quadros clínicos, através de avaliações quantitativas do movimento dos membros superiores e inferiores, além da criação de novas técnicas de medição. Três exemplos são mostrados neste artigo: (I análise tridimensional do movimento de abdução do ombro; (II análise da marcha de indivíduos com lesão no ligamento cruzado anterior; e (III o desenvolvimento de instrumentação eletrônica para dispositivos de auxílio, ou seja, bengalas e muletas instrumentalizadas para o estudo das relações de força entre os membros superiores e inferiores, durante a marcha de pacientes com lesão ortopédica e neurológica.Biomechanics is nowadays characterized by new procedures for human movement analysis and by modern measurement techniques, data processing and storage, contributing to the advances in the orthopedic practice. The proposed thematic in this work is based on the application of orthopedic biomechanics to different clinical cases, through quantitative evaluation of the upper and lower limb movement and the development of new assessment techniques. Three examples are shown in this paper: (I a tridimensional analysis of the abduction movement of the shoulder; (II a gait analysis in individuals with anterior cruciate ligament injury; and (III the development of electronic instrumentation for walking aids i.e., instrumented canes and crutches for the study of the relationship between the upper and lower limb loads during gait of orthopedic and neurologic patients.

  7. EDITORIAL: 17th International Summer School on Vacuum, Electron, and Ion Technologies (VEIT 2011)

    Science.gov (United States)

    van de Sanden, M. C. M.; Dimitrova, Miglena; Ghelev, Chavdar

    2012-03-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biennially since 1977, when the VEIT Summer School series was launched by the Institute of Electronics, Bulgarian Academy of Sciences. The aim was to act as a forum for the exchange and dissemination of knowledge and ideas on the latest developments in electron-, ion- and plasma-assisted technologies. The organizers of the 2011 edition of the event were the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria and the Department of Applied Physics, Eindhoven University of Technology, Eindhoven, The Netherlands. Whilst the school initially provided a meeting place for researchers mainly from Eastern and Central European countries, its importance has grown issue by issue. The school is now a major scientific event and a meeting place for young scientists from Eastern and Western Europe involved in research and development associated with high-tech industries. Many former school participants have gone on to become leading scientists in research establishments and companies throughout the world. Leading international companies, such as High Voltage Engineering, Balzers, Varian, and Hauzer have used the VEIT forum to present their products through oral presentations, poster contributions and exhibits. The School Proceedings have been published in special issues of the international journals Vacuum, Plasma Processes and Polymers and Journal of Physics: Conference Series. The Seventeenth edition of VEIT was held in the Black Sea resort of Sunny Beach, Bulgaria on 19-23 September 2011. It was attended by 96 participants from 18 countries: Belgium, Brazil, Bulgaria, Czech Republic, Denmark, France, Germany, Greece, The Netherlands, Romania, Russia, Serbia, Sweden, Switzerland, Turkey, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this special issue of Journal of

  8. Influences of Inadequate Instructional Materials and Facilities in Teaching and Learning of Electrical/Electronics Technology Education Courses

    Science.gov (United States)

    Ogbu, James E.

    2015-01-01

    This study investigated the influences of inadequate instructional materials and facilities in the teaching and learning of electrical/electronics (E/E) technology education courses. The study was guided by two research questions and two null hypotheses which were tested at 0.05 level of significance. The design employed was descriptive survey…

  9. Integration of the Systems Approach and Electronic Technology in Learning and Teaching Music. Report on Federal Project #1309.

    Science.gov (United States)

    Knuth, Alice M.

    To determine the use of technology in elementary school music instruction, a research project was conducted with 19 third and 24 fifth grade students and 24 college music education students, testing (1) music learning system with behavioral objectives, instructional specifications, and data analysis; and (2) an electronic keyboard instrument,…

  10. From the Islands of Knowledge to a Shared Understanding: Interdisciplinarity and Technology Literacy for Innovation in Smart Electronic Product Design

    Science.gov (United States)

    Blanco, Teresa; Casas, Roberto; Manchado-Pérez, Eduardo; Asensio, Ángel; López-Pérez, Jose M.

    2017-01-01

    In the context of the evolving Internet, a balance between technological advances and meaning change is crucial to develop innovative and breakthrough "connected electronics" that enable the Internet of Things. Designers and technologists are key enablers of this process respectively, ensuring adequate users' needs and technology…

  11. Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

    Science.gov (United States)

    Aquino, Cesar A.

    2014-01-01

    This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

  12. Validating the Technology Acceptance Model in the Context of the Laboratory Information System-Electronic Health Record Interface System

    Science.gov (United States)

    Aquino, Cesar A.

    2014-01-01

    This study represents a research validating the efficacy of Davis' Technology Acceptance Model (TAM) by pairing it with the Organizational Change Readiness Theory (OCRT) to develop another extension to the TAM, using the medical Laboratory Information Systems (LIS)--Electronic Health Records (EHR) interface as the medium. The TAM posits that it is…

  13. Detection of off-flavor in catfish using a conducting polymer electronic-nose technology.

    Science.gov (United States)

    Wilson, Alphus D; Oberle, Charisse S; Oberle, Daniel F

    2013-11-25

    The Aromascan A32S conducting polymer electronic nose was evaluated for the capability of detecting the presence of off-flavor malodorous compounds in catfish meat fillets to assess meat quality for potential merchantability. Sensor array outputs indicated that the aroma profiles of good-flavor (on-flavor) and off-flavor fillets were strongly different as confirmed by a Principal Component Analysis (PCA) and a Quality Factor value (QF > 7.9) indicating a significant difference at (P flavor and off-flavor catfish at high levels of accuracy (>90%) and with relatively low rates (≤5%) of unknown or indecisive determinations in three trials. This A32S e-nose instrument also was capable of detecting the incidence of mild off-flavor in fillets at levels lower than the threshold of human olfactory detection. Potential applications of e-nose technologies for pre- and post-harvest management of production and meat-quality downgrade problems associated with catfish off-flavor are discussed.

  14. Electron Beam Melting Manufacturing Technology for Individually Manufactured Jaw Prosthesis: A Case Report.

    Science.gov (United States)

    Suska, Felicia; Kjeller, Göran; Tarnow, Peter; Hryha, Eduard; Nyborg, Lars; Snis, Anders; Palmquist, Anders

    2016-08-01

    In the field of maxillofacial reconstruction, additive manufacturing technologies, specifically electron beam melting (EBM), offer clinicians the potential for patient-customized design of jaw prostheses, which match both load-bearing and esthetic demands. The technique allows an innovative, functional design, combining integrated porous regions for bone ingrowth and secondary biological fixation with solid load-bearing regions ensuring the biomechanical performance. A patient-specific mandibular prosthesis manufactured using EBM was successfully used to reconstruct a patient's mandibular defect after en bloc resection. Over a 9-month follow-up period, the patient had no complications. A short operating time, good esthetic outcome, and high level of patient satisfaction as measured by quality-of-life questionnaires-the European Organisation for Research and Treatment of Cancer QLQ-C30 (30-item quality-of-life core questionnaire) and H&N35 (head and neck cancer module)-were reported for this case. Individually planned and designed EBM-produced prostheses may be suggested as a possible future alternative to fibular grafts or other reconstructive methods. However, the role of porosity, the role of geometry, and the optimal combination of solid and porous parts, as well as surface properties in relation to soft tissues, should be carefully evaluated in long-term clinical trials. Copyright © 2016 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.

  15. Frictional and bone ingrowth properties of engineered surface topographies produced by electron beam technology.

    Science.gov (United States)

    Biemond, J Elizabeth; Aquarius, René; Verdonschot, Nico; Buma, Pieter

    2011-05-01

    Electron beam melting (E-beam) is a new technology to produce 3-dimensional surface topographies for cementless orthopedic implants. The friction coefficients of two newly developed E-beam produced surface topographies were in vitro compared with sandblasted E-beam and titanium plasma sprayed controls. Bone ingrowth (direct bone-implant contact) was determined by implanting the samples in the femoral condyles of 6 goats for a period of 6 weeks. Friction coefficients of the new structures were comparable to the titanium plasma sprayed control. The direct bone-implant contact was 23.9 and 24.5% for the new surface structures. Bone-implant contact of the sandblasted and titanium plasma sprayed control was 18.2 and 25.5%, respectively. The frictional and bone ingrowth properties of the E-beam produced surface structures are similar to the plasma-sprayed control. However, since the maximal bone ingrowth had not been reached for the E-beam structures during the relatively short-term period, longer-term follow-up studies are needed to assess whether the E-beam structures lead to a better long-term performance than surfaces currently in use, such as titanium plasma spray coating.

  16. A Technology Acceptance Model for Inter-Organisational Electronic Medical Records Systems

    Directory of Open Access Journals (Sweden)

    Jocelyn Handy

    2001-11-01

    Full Text Available This article reports the findings of the first stage of an ongoing, longitudinal study into the implementation of an interorganisational electronic medical records (EMR system. The study adapted and expanded Davis' (1993 technology acceptance model (TAM to investigate the attitudes of primary care practitioners towards a proposed system for maternity patients. All doctors and midwives holding maternity care contracts with a large urban hospital in New Zealand were sent a questionnaire soliciting their views on a planned EMR system linking the hospital and the primary care sectors. The results showed that whilst Davis' two key factors of perceived ease of use and perceived usefulness were important to medical professionals, another key factor, perceived system acceptability, which concerns control and management of information is vitally important to the acceptance of the system. The study also showed that the two groups of professionals had differing requirements due to different levels of experience and practice computerisation. Finally, the research highlights a number of wider organisational issues particularly relevant to the use of inter organisational systems in general and healthcare systems in particular.

  17. In situ bioremediation of nitrate and perchlorate in vadose zone soil for groundwater protection using gaseous electron donor injection technology.

    Science.gov (United States)

    Evans, Patrick J; Trute, Mary M

    2006-12-01

    When present in the vadose zone, potentially toxic nitrate and perchlorate anions can be persistent sources of groundwater contamination. Gaseous electron donor injection technology (GEDIT), an anaerobic variation of petroleum hydrocarbon bioventing, involves injecting electron donor gases, such as hydrogen or ethyl acetate, into the vadose zone, to stimulate biodegradation of nitrate and perchlorate. Laboratory microcosm studies demonstrated that hydrogen and ethanol promoted nitrate and perchlorate reduction in vadose zone soil and that moisture content was an important factor. Column studies demonstrated that transport of particular electron donors varied significantly; ethyl acetate and butyraldehyde were transported more rapidly than butyl acetate and ethanol. Nitrate removal in the column studies, up to 100%, was best promoted by ethyl acetate. Up to 39% perchlorate removal was achieved with ethanol and was limited by insufficient incubation time. The results demonstrate that GEDIT is a promising remediation technology warranting further validation.

  18. PREFACE: Fifteenth International Summer School on Vacuum, Electron and Ion Technologies (VEIT 2007)

    Science.gov (United States)

    Guerassimov, Nikolay; Möller, Wolfhard; Ghelev, Chavdar

    2008-03-01

    The International Summer School on Vacuum, Electron and Ion Technologies (VEIT) has been organized biannually since 1977. It is a forum for the interchange and dissemination of knowledge and ideas on the latest developments in electron-, ion-, and plasma-assisted technologies. The organizers of the event (since 2001) have been the Institute of Electronics, Bulgarian Academy of Sciences, Sofia, Bulgaria, the Institute of Ion Beam Physics and Materials Research, Forschungszentrum Dresden-Rossendorf, Dresden, Germany, and the Evrika Foundation, Sofia, Bulgaria. The fifteenth meeting of VEIT was held in the Black Sea resort of Sozopol, Bulgaria from 17-21 September 2007 and was attended by around 120 participants from 17 countries: Australia, Belgium, Bulgaria, Canada, Czech Republic, Germany, Hungary, Italy, The Netherlands, Poland, Pakistan, Romania, Sweden, Switzerland, Ukraine, UK and USA. Following the tradition of publishing the VEIT Proceedings, a selection of papers presented at the event is published in this volume of Journal of Physics: Conference Series, all peer reviewed to meet the originality and quality criteria of the journal. The school consisted of 11 oral and 3 poster sessions. There were 17 invited talks of general interest and 12 progress reports were presented orally. In total 86 contributed papers were presented during the three poster sessions. There were several scientific highlights covering the fundamentals of gas discharges and interaction of fast particles with solids, a wide range of conventional and novel applications such as for hard coatings and optical/protective layers, nanosized structures produced by evaporation, sputtering or external irradiation. Recent achievements in the modification of materials using charged particles or laser beams, thin layers deposition, properties, and characterization and novel materials, techniques, devices were highlighted. Despite the busy scientific program, the atmosphere was relaxed and informal

  19. Current status and future perspectives of electron interactions with molecules, clusters, surfaces, and interfaces [Workshop on Fundamental challenges in electron-driven chemistry; Workshop on Electron-driven processes: Scientific challenges and technological opportunities

    Energy Technology Data Exchange (ETDEWEB)

    Becker, Kurt H.; McCurdy, C. William; Orlando, Thomas M.; Rescigno, Thomas N.

    2000-09-01

    This report is based largely on presentations and discussions at two workshops and contributions from workshop participants. The workshop on Fundamental Challenges in Electron-Driven Chemistry was held in Berkeley, October 9-10, 1998, and addressed questions regarding theory, computation, and simulation. The workshop on Electron-Driven Processes: Scientific Challenges and Technological Opportunities was held at Stevens Institute of Technology, March 16-17, 2000, and focused largely on experiments. Electron-molecule and electron-atom collisions initiate and drive almost all the relevant chemical processes associated with radiation chemistry, environmental chemistry, stability of waste repositories, plasma-enhanced chemical vapor deposition, plasma processing of materials for microelectronic devices and other applications, and novel light sources for research purposes (e.g. excimer lamps in the extreme ultraviolet) and in everyday lighting applications. The life sciences are a rapidly advancing field where the important role of electron-driven processes is only now beginning to be recognized. Many of the applications of electron-initiated chemical processes require results in the near term. A large-scale, multidisciplinary and collaborative effort should be mounted to solve these problems in a timely way so that their solution will have the needed impact on the urgent questions of understanding the physico-chemical processes initiated and driven by electron interactions.

  20. COMPETENCIAS GENÉRICAS EN LA EDUCACIÓN SUPERIOR TECNOLÓGICA MEXICANA: DESDE LAS PERCEPCIONES DE DOCENTES Y ESTUDIANTES (GENERIC COMPETENCES IN MEXICAN HIGHER TECHNOLOGICAL EDUCATION: FROM THE PERCEPTIONS OF TEACHERS AND STUDENTS

    Directory of Open Access Journals (Sweden)

    Amalia Medina Palomera

    2010-12-01

    Full Text Available Resumen:Los modelos educativos, a nivel mundial, están sufriendo modificaciones hacia la implementación del enfoque en competencias. Tal es el caso del Sistema Nacional de Educación Superior Tecnológica en México. Dada la relevancia, se llevó a cabo un estudio para conocer la perspectiva que tienen los docentes y estudiantes sobre las competencias genéricas (CG. El trabajo se desarrolló mediante encuestas aplicadas en Institutos Tecnológicos a nivel nacional. En este artículo se presentan los resultados obtenidos sobre los siguientes tópicos: la importancia de las CG, la identificación de las esenciales, y la relación que tienen entre las diferentes categorías de carreras de los Institutos Tecnológicos. Se encontró que los docentes otorgan mayor importancia a las CG que los estudiantes; además, se advierte una concordancia de los resultados entre las CG esenciales tanto por los docentes como por los estudiantes; asimismo, se observan varias diferencias entre categorías de carreras. Se concluye que tanto académicos y estudiantes perciben positivamente la incorporación de las CG en los programas de estudio, dejando entrever un ambiente propicio para su implementación. Se propone, además, un estudio complementario. El análisis reveló que a cada carrera le corresponden diferentes CG esenciales.Abstract: The educational models around the world are undergoing modifications to the implementation of the competences approach. Such is the case of the National Higher Technological Education System in Mexico. Given the importance of this, conducted a study to determine the perspective which teachers and students on generic competences (CG. The work was developed through surveys completed in Institutes of Technology nationwide. This article presents the results obtained on the following topics: the importance of the CG, the identification of essential and the relationship they have between different categories of careers in research

  1. Sobredentadura total superior implantosoportada

    Directory of Open Access Journals (Sweden)

    Luis Orlando Rodríguez García

    2010-06-01

    Full Text Available Se presenta un caso de un paciente desdentado total superior, rehabilitado en la consulta de implantología de la Clínica "Pedro Ortiz" del municipio Habana del Este en Ciudad de La Habana, Cuba, en el año 2009, mediante prótesis sobre implantes osteointegrados, técnica que se ha incorporado a la práctica estomatológica en Cuba como alternativa al tratamiento convencional en los pacientes desdentados totales. Se siguió un protocolo que comprendió una fase quirúrgica, procedimiento con o sin realización de colgajo y carga precoz o inmediata. Se presenta un paciente masculino de 56 años de edad, que acudió a la consulta multidisciplinaria, preocupado, porque se le habían elaborado tres prótesis en los últimos dos años y ninguna reunía los requisitos de retención que él necesitaba para sentirse seguro y cómodo con las mismas. El resultado final fue la satisfacción total del paciente, con el mejoramiento de la calidad estética y funcional.

  2. A Comparative Study of the Application of Electronic Data Interchange and Internet Technology to Business Process Reengineering

    Institute of Scientific and Technical Information of China (English)

    Hamid Reza Ahadi

    2004-01-01

    This study investigates the role of information technology in business process reengineering (BPR) implementation.To increase the prospects of successful BPR implementation,the role of information technology in BPR should be thoroughly investigated to find the logical relationships between information technology and BPR.This study used a survey methodology to gather information from 72 BPR programs.The results show that different information technologies,such as those examined in this study,electronic data interchange (EDI) and Internet,provide different capabilities and can be useful in different ways and for different purposes.Lack of attention to these relationships may be due to the unacceptable high implementation failure rate in the previous BPR efforts.

  3. ELECTRONIC FUNDS TRANSFER IN MONEY LAUNDERING CRIME: REGULATION NEEDED IN RESPONSE TO MEETING OF TECHNOLOGY AND CRIME IN INDONESIA

    Directory of Open Access Journals (Sweden)

    Go Lisanawati

    2010-12-01

    Full Text Available Advancements in information technology have affected modern society in numerous areas, including communication, education, commerce, and so on. These advancements have brought incredible benefits; they have also provided opportunities and motivation for various forms of crime. Information technology has also made crime highly profitable. Among the many types of criminal activities, modern technology has allowed money laundering to become an online crime. This new type of crime has raised some legal questions about the capability of national and international regulations in relation to current and upcoming issues. These include finding electronic funds transfer records after the fact, and determining money laundering activity that includes electronic funds transfer. Although Indonesia is an integral member of a community concerned with the interaction between technology and money laundering, it has not provided regulations to deal with the current and upcoming issues involving the crime of electronic money laundering. The increase in the amount of crime indicates the following series of techniques and mechanisms that had been detected in relation to money laundering activity. This research will examine current issues under the light of Indonesian regulations, and will put forward some proposals to close the legal vacuum.

  4. High-pitch metal-on-glass technology for pad pitch adaptation between detectors and readout electronics

    CERN Document Server

    Ullán, Miguel; Campabadal, Francesca; Fleta, Celeste; Garcia, Carmen; Gonzalez, Francisco; Bernabeu, Jose

    2004-01-01

    Modern high-energy physics and astrophysics strip detectors have increased channel density to levels at which their connection with readout electronics has become very complex due to high pad pitch. Also, direct wire bonding is prevented by the fact that typically detector's pad pitch and electronics' pad pitch do not match. A high- pitch metal-on-glass technology is presented, that allows pad pitch adaptation between detectors and readout electronics. It consists of high-density metal lines on top of an insulating glass substrate. A photoresist layer is deposited covering the metal tracks for passivation and protection The technology is tested for conductivity, bondability, bonding pull force, peel off, and radiation hardness, and it is an established technology in the clean room of the CNM Institute in Barcelona. This technology has been chosen by the ATLAS Collaboration for the pad pitch adapters (PPA) of the SCT Endcap Modules, by a Compton camera project, and by other HEP groups for interconnection betwe...

  5. 77 FR 72985 - Health Information Technology: Revisions to the 2014 Edition Electronic Health Record...

    Science.gov (United States)

    2012-12-07

    ... Electronic Health Record Certification Criteria; and Medicare and Medicaid Programs; Revisions to the Electronic Health Record Incentive Program AGENCY: Office of the National Coordinator for Health Information... Electronic Health Record (EHR) Incentive Programs We described the legislative basis for the Medicare and...

  6. Playing with Technology: Mother-Toddler Interaction Scores Lower during Play with Electronic Toys

    Science.gov (United States)

    Wooldridge, Michaela B.; Shapka, Jennifer

    2012-01-01

    To investigate play with electronic toys (battery-operated or digital), 25 mother-toddler (16-24 months old) dyads were videotaped in their homes playing with sets of age-appropriate electronic and non-electronic toys for approximately 10 min each. Parent-child interactions were coded from recorded segments of both of the play conditions using the…

  7. Advanced electron-beam pattern generation technology for 180-nm masks

    Science.gov (United States)

    Abboud, Frank E.; Sauer, Charles A.; Wang, William; Vernon, Matthew; Prior, Richard; Pearce-Percy, Henry T.; Cole, Damon M.; Mankos, Marian

    1997-02-01

    Optical lithography will be the dominant technique used for 180 nm generation production devices. With a reduced feature size on the wafer, 4X optical reduction, optical proximity correction (OPC), and phase shift lithography techniques, mask-related errors become even more critical to wafer yield. In addition, small feature sizes and lithography enhancement techniques require finer edge resolution. Clearly, new patten generation tools are needed for this generation of maskmaking requirements. Multipass gray (MPG) writing strategy was introduced with the MEBESR 4500S. The ability to deliver a 4X improvement in dose while improving throughput is a significant advantage over previous MEBES systems. Since MPG is used in conjunction with offset scan voting, reduction in butting of over 50% has been demonstrated with MPG. Higher doses are now possible with use of a multipass writing strategy and a brighter source. As a result, resists with higher contrast and process robustness can be used. A significant improvement in uniformity is noted with the new process, an essential step needed in meeting 180 nm requirements. Dry etch is essential to meet these new requirements and with sufficient process margin to be manufacturable. This paper describes the key electron-beam pattern generation technology necessary to meet the requirement of 180 nm masks, including a high dose field- emission gun and column capable of delivering 800 A/cm2; complete dynamic beam correction; a digital stage servo to provide stable, reproducible stage control under high acceleration conditions; a high speed data path to support 320 MHz beam blanking and a 10 nm data address. This paper also examines the improvements made to the MEBES platform and documents the resulting improvements and compares these results to the requirements for 180 nm masks.

  8. Design and implementation of a fs-resolved transmission electron microscope based on thermionic gun technology

    Science.gov (United States)

    Piazza, L.; Masiel, D. J.; LaGrange, T.; Reed, B. W.; Barwick, B.; Carbone, Fabrizio

    2013-09-01

    In this paper, the design and implementation of a femtosecond-resolved ultrafast transmission electron microscope is presented, based on a thermionic gun geometry. Utilizing an additional magnetic lens between the electron acceleration and the nominal condenser lens system, a larger percentage of the electrons created at the cathode are delivered to the specimen without degrading temporal, spatial and energy resolution significantly, while at the same time maintaining the femtosecond temporal resolution. Using the photon-induced near field electron microscopy effect (PINEM) on silver nanowires the cross-correlation between the light and electron pulses was measured, showing the impact of the gun settings and initiating laser pulse duration on the electron bunch properties. Tuneable electron pulses between 300 fs and several ps can be obtained, and an overall energy resolution around 1 eV was achieved.

  9. Using technology to teach technology: design and evaluation of bilingual online physician education about electronic medical records.

    Science.gov (United States)

    Edmonson, Sarah R; Esquivel, Adol; Mokkarala, Pallavi; Johnson, Craig W; Phelps, Cynthia L

    2005-01-01

    The "EMR Tutorial" is designed to be a bilingual online physician education environment about electronic medical records. After iterative assessment and redesign, the tutorial was tested in two groups: U.S. physicians and Mexican medical students. Split-plot ANOVA revealed significantly different pre-test scores in the two groups, significant cognitive gains for the two groups overall, and no significant difference in the gains made by the two groups. Users rated the module positively on a satisfaction questionnaire.

  10. Market structure, industrial organisation and technological development: the case of the Japanese electronics-based nc-machine tool industry.

    OpenAIRE

    Watanabe, S

    1983-01-01

    ILO pub-WEP pub. Working paper on the impact of market structure and business organization on technological change in the automatic control machine tool industry in Japan - based on a 1982 sample survey of 40 industrial enterprises, discusses research and development trends, demand, production, subcontracting, competition, etc.; investigates the impact of electronics Innovation on small scale industry, the international division of labour and on developing countries. Bibliography and graphs.

  11. Structure and machinability of thin-walled parts made of titanium alloy powder using electron beam melting technology

    Science.gov (United States)

    Isaev, A.; Grechishnikov, V.; Kozochkin, M.; Volosova, M.; Petuhov, Yu; Peretyagin, P.

    2016-04-01

    The present study aims at study of structure and properties of raw and thermal treated titanium-based powder material used to produce the thin-walled components by electron beam melting technology. Producing the end product means also studying the finishing cutting process. Examining the quality of end product in terms of geometric tolerance and thin walls thickness stability consists of control the surface roughness is also included in this study.

  12. Escuela Superior de Palos Verdes

    Directory of Open Access Journals (Sweden)

    Neutra, Richard J.

    1965-02-01

    Full Text Available Before initiating the building operations for the «Palos Verdes» School, the site was divided into two large horizontal surfaces, at different levels. The lower one served to accommodate the playing fields, a car park, the physical training building, and shop and ancillary buildings. On the higher of these two surfaces, and to the West of the access road, there is a car park and also the building and plot of ground devoted to agricultural technology, as well as the literary studies and general purpose buildings. As a complement to these, there is a series of blocks, arranged in parallel rows, which house the administrative offices, the art school, the craft's school, the general classrooms, and those devoted to higher education. The fascinating aspect of this school is the outstanding penetration of the architect's mind into the essential function of the project. Its most evident merit is the sense of comradeship and harmony that permeates the whole architectural manifold.Antes de construir el complejo escolar «Palos Verdes» se comenzó por crear, en el terreno, dos grandes mesetas a niveles diferentes. Sobre el inferior se organizaron: los campos de juegos, de deportes, un aparcamiento, el edificio para educación física y los destinados a tiendas y servicios. Sobre la meseta superior, al oeste de la vía de acceso, se dispuso un aparcamiento y el edificio y campo para adiestramiento agrícola; al este, otro aparcamiento, el edificio dedicado a materias literarias, y el destinado a usos múltiples. Completan las instalaciones de la escuela una serie de bloques paralelos: la administración, la escuela de arte, las clases de trabajos manuales, las aulas de enseñanzas generales, y las de los cursos superiores. Lo fascinante de este complejo escolar es la perfecta y magistral compenetración del arquitecto con el tema proyectado, y su mayor mérito, la sensación de cordialidad y armonía con el ambiente.

  13. Microgravity experiments on boiling and applications: research activity of advanced high heat flux cooling technology for electronic devices in Japan.

    Science.gov (United States)

    Suzuki, Koichi; Kawamura, Hiroshi

    2004-11-01

    Research and development on advanced high heat flux cooling technology for electronic devices has been carried out as the Project of Fundamental Technology Development for Energy Conservation, promoted by the New Energy and Industrial Technology Development Organization of Japan (NEDO). Based on the microgravity experiments on boiling heat transfer, the following useful results have obtained for the cooling of electronic devices. In subcooled flow boiling in a small channel, heat flux increases considerably more than the ordinary critical heat flux with microbubble emission in transition boiling, and dry out of the heating surface is disturbed. Successful enhancement of heat transfer is achieved by a capillary effect from grooved surface dual subchannels on the liquid supply. The critical heat flux increases 30-40 percent more than for ordinary subchannels. A self-wetting mechanism has been proposed, following investigation of bubble behavior in pool boiling of binary mixtures under microgravity. Ideas and a new concept have been proposed for the design of future cooling system in power electronics.

  14. Dawn of the electronic age electrical technologies in the shaping of the modern world 1914 to 1945

    CERN Document Server

    Nebeker, Frederik

    2009-01-01

    Much of the infrastructure of today's industrialized world arose in the period from the outbreak of World War I to the conclusion of World War II. It was during these years that the capabilities of traditional electrical engineering became ubiquitous. Even more importantly, it was during this time that a new type of electrical engineering--electronics--emerged. Because of its applications in communications, entertainment, industry, science and medicine, and the military, the electronics industry became a major part of the economy. Dawn of the Electronic Age explores how this engineering knowledge and its main applications developed in various scientific, economic, and social contexts, and explains how each was profoundly affected by electrical technologies. It takes an international perspective and a narrative approach, unfolding the story chronologically. --from publisher description.

  15. MO-H-19A-03: Patient Specific Bolus with 3D Printing Technology for Electron Radiotherapy

    Energy Technology Data Exchange (ETDEWEB)

    Zou, W; Swann, B; Siderits, R; McKenna, M; Khan, A; Yue, N; Zhang, M [Rutgers University, New Brunswick, NJ (United States); Fisher, T [Memorial Medical Center, Modesto, CA (United States)

    2014-06-15

    Purpose: Bolus is widely used in electron radiotherapy to achieve desired dose distribution. 3D printing technologies provide clinicians with easy access to fabricate patient specific bolus accommodating patient body surface irregularities and tissue inhomogeneity. This study presents the design and the clinical workflow of 3D printed bolus for patient electron therapy in our clinic. Methods: Patient simulation CT images free of bolus were exported from treatment planning system (TPS) to an in-house developed software package. Bolus with known material properties was designed in the software package and then exported back to the TPS as a structure. Dose calculation was carried out to examine the coverage of the target. After satisfying dose distribution was achieved, the bolus structure was transferred in Standard Tessellation Language (STL) file format for the 3D printer to generate the machine codes for printing. Upon receiving printed bolus, a quick quality assurance was performed with patient resimulated with bolus in place to verify the bolus dosimetric property before treatment started. Results: A patient specific bolus for electron radiotherapy was designed and fabricated in Form 1 3D printer with methacrylate photopolymer resin. Satisfying dose distribution was achieved in patient with bolus setup. Treatment was successfully finished for one patient with the 3D printed bolus. Conclusion: The electron bolus fabrication with 3D printing technology was successfully implemented in clinic practice.

  16. Low-noise design issues for analog front-end electronics in 130 nm and 90 nm CMOS technologies

    CERN Document Server

    Manghisoni, M; Re, V; Speziali, V; Traversi, G

    2007-01-01

    Deep sub-micron CMOS technologies provide wellestablished solutions to the implementation of low-noise front-end electronics in various detector applications. The IC designers’ effort is presently shifting to 130 nm CMOS technologies, or even to the next technology node, to implement readout integrated circuits for silicon strip and pixel detectors, in view of future HEP applications. In this work the results of noise measurements carried out on CMOS devices in 130 nm and 90 nm commercial processes are presented. The behavior of the 1/f and white noise terms is studied as a function of the device polarity and of the gate length and width. The study is focused on low current density applications where devices are biased in weak or moderate inversion. Data obtained from the measurements provide a powerful tool to establish design criteria in nanoscale CMOS processes for detector front-ends in LHC upgrades.

  17. Animated Pedagogical Agents: A Review of Agent Technology Software in Electronic Learning Environments

    Science.gov (United States)

    Govindasamy, Malliga K.

    2014-01-01

    Agent technology has become one of the dynamic and most interesting areas of computer science in recent years. The dynamism of this technology has resulted in computer generated characters, known as pedagogical agent, entering the digital learning environments in increasing numbers. Commonly deployed in implementing tutoring strategies, these…

  18. 45 CFR 170.210 - Standards for health information technology to protect electronic health information created...

    Science.gov (United States)

    2010-10-01

    ... information—(1) General. Any encryption algorithm identified by the National Institute of Standards and Technology (NIST) as an approved security function in Annex A of the Federal Information Processing Standards... 45 Public Welfare 1 2010-10-01 2010-10-01 false Standards for health information technology...

  19. Factors Influencing Electronic Business Technologies Adoption and Use by Small and Medium Scale Enterprises (SMES in a Nigerian Municipality

    Directory of Open Access Journals (Sweden)

    Wole Olatokun

    2011-12-01

    Full Text Available This study examined the adoption of e-business technologies by SMEs in Ibadan a metropolitan city in South West Nigeria. It aimed at finding out the factors that promote and inhibit the adoption of e-business technologies, the kinds of e-business technologies adopted and used and their extent of use. It also identified the challenges faced by SMEs with regard to e-business technologies use. Descriptive survey research design was adopted. Data were collected with structured questionnaires administered among sixty SMEs (30 adopters and 30 non-adopters. Four hypotheses were tested at 0.05 level of significance. Data were analyzed using frequency and percentage distributions, t-test and multiple regression. Results showed that majority of the firms were smaller firms with 0-9 employees and not less than 1-5 years of establishment. The respondents cited perceived benefits as the major factor for adopting e-business technologies in their firms while 83.4% of non-adopters agreed that low capital base was the major reason inhibiting them from adoption. Hundred percent of the firms each have adopted internet technology and electronic mail which are daily used by all the firms. The major service provided with the use of these technologies was e-mail to communicate with customers and suppliers. On the benefit and challenges of e-business, all the organizations affirmed that e-business have benefited them in the sharing and exchange of information and improving market share. About 96.7% of them affirmed inadequate technical manpower as the major challenge. Further results revealed that the age of the SMEs had significant relationship on the adoption of e-business while size had no significant relationship. Independent variables jointly correlated significantly with the adoption of electronic business (R=0.162 and they contributed (22% to the variance of the dependent variables. Their significant contributions were as follows: perceived benefit (β=0.568, p

  20. A Low Cost, Electronically Scanned Array (ESA) Antenna Technology for Aviation Hazard Detection and Avoidance Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The proposed project will investigate the feasibility of utilizing ThinKom's low cost electronically scanned array (ESA) antenna concepts to enable affordable...

  1. TOOLS FOR CONSUMER RIGHTS PROTECTION IN THE PREDICTION OF ELECTRONIC VIRTUAL MARKET AND TECHNOLOGICAL CHANGES

    National Research Council Canada - National Science Library

    Mikulás Gangur; Miroslav Plevný

    2014-01-01

    .... Both the operator and the electronic market participant can be considered consumers of this particular market with reference to the requirements for the accuracy of its outputs but also for the market liquidity...

  2. Local and Global Mechanical Behavior and Microstructure of Ti6Al4V Parts Built Using Electron Beam Melting Technology

    Science.gov (United States)

    Ladani, Leila

    2015-09-01

    Laser and electron beam melting are prime technologies in metallic powder bed additive manufacturing in which parts are built layer by layer using high energy source. The technology is at a level where each layer can be as thin as 50 µm. Melting and solidification of each powder layer is typically accompanied by some subsurface melting to assure adherence and fusion of layers. In addition to anisotropic mechanical behavior of material caused by layering phenomenon, it is expected that the local mechanical behavior and microstructure vary throughout each build. In this manuscript, local and global mechanical behavior of Ti6Al4V parts produced using electron beam melting technology is investigated using bulk scale mechanical testing and nanoindentation. Parts fabricated in different build orientation were tested at different strain rates at a large scale. The experiment showed that strength is minimal perpendicular to the build plate. Additionally, material exhibited different local mechanical properties relative to distance from base plate. Investigation of the microstructure indicated very distinguished variations in the grain size and alpha and beta phase formation of material in different locations of part relative to build plate. Strength reduction in perpendicular direction is examined and explained through understanding of the microstructure and plastic deformation mechanism in α phase and prior β grains.

  3. 先天性上斜肌麻痹下斜肌的CT三维重建%Application of three - dimensional CT reconstruction technology on inferior oblique muscle in congenital superior oblique palsy

    Institute of Scientific and Technical Information of China (English)

    张阳; 宋籽浔; 王晓青

    2014-01-01

    AIM: To investigate the viability of the morphology of inferior oblique muscle observed stereoscopically using 3-dimensional CT reconstruction technique. METHODS: This control study included of 29 cases which were clinically diagnosed with monocular congenital superior oblique palsy, examined by dimensional CT. The images of the inferior oblique muscle were reconstructed by Mimics software. 3D digital images on the basis of CT scanning data of the individuals were established. Observing the morphology of binocular inferior oblique muscle by self-controlled design, we compared the maximum transverse diameter of inferior oblique muscle of paralyzed eye with non-paralyzed one. We chose 5% as the significant level. RESULTS: The reconstructed results of 3-dimensional CT scan showed that not all of the inferior oblique abdominal muscle of paralyzed eyes were thinner than that of the non-paralyzed eye in maximum transverse diameter of cross - sectional area. The maximum transverse diameter of inferior oblique muscle was measured. The average maximum transverse diameter of the paralyzed eye was 6. 797±1. 083mm and the non-paralyzed eye was 6. 507 ± 0. 848mm. The maximum transverse diameter of inferior oblique muscle of paralyzed eye did not, however, differ significantly from the normal (P>0. 05). CONCLUSION: The three - dimensional CT reconstruction technology can be used for preoperative evaluation of the morphology of inferior oblique muscle.%目的:探索应用CT三维重建技术立体观察下斜肌形态的可行性。  方法:临床诊断单眼先天性上斜肌麻痹的患者29例进行眼眶CT扫描。用Mimics软件对原始CT扫描数据进行三维重建,建立基于个体CT扫描数据的下斜肌数字图像,观察双眼下斜肌的3D形态。用自身对照设计,比较麻痹眼和健眼下斜肌最大横径差异,设定P  结果:先天性上斜肌麻痹患者麻痹眼的下斜肌有的比健眼下斜肌粗;有的比健眼下斜

  4. A computationally assisted spectroscopic technique to measure secondary electron emission coefficients in technological rf plasmas

    Science.gov (United States)

    Berger, Birk; Schulze, Julian; Daksha, Manaswi; Schuengel, Edmund; Koepke, Mark; Korolov, Ihor; Derzsi, Aranka; Donko, Zoltan

    2016-09-01

    A Computationally Assisted Spectroscopic Technique to measure secondary electron emission coefficients (y-CAST) in capacitive rf plasmas is proposed. This non-intrusive, sensitive diagnostic is based on a combination of Phase Resolved Optical Emission Spectroscopy and PIC simulations. Under most conditions in electropositive plasmas the spatio-temporally resolved electron-impact excitation rate features two distinct maxima adjacent to each electrode at different times within one rf period. One maximum is the consequence of an energy gain of the electrons due to sheath expansion. The second maximum is produced by electrons accelerated towards the plasma bulk by the sheath electric field at the time of maximum voltage drop across the sheath. Due to the different excitation mechanisms the ratio of the intensities of these maxima is very sensitive to y, which allows for its determination via comparing the experimentally measured excitation profiles with corresponding simulation data obtained with various y-coefficients. This diagnostic is tested here in a geometrically symmetric reactor, for stainless steel electrodes and argon gas. An effective secondary electron emission coefficient of y = 0.067+-0.010 is obtained, which is in excellent agreement with previous experimental results.

  5. Tools for Consumer Rights Protection in the Prediction of Electronic Virtual Market and Technological Changes

    Directory of Open Access Journals (Sweden)

    Mikuláš Gangur

    2014-05-01

    Full Text Available Electronic virtual markets can serve as an alternative tool for collecting information that is spread among numerous experts. This is the principal market functionality from the operators’ point of view. On the other hand it is profits that are the main interest of the market participants. What they expect from the market is liquidity as high as possible and the opportunity for unrestricted trading. Both the operator and the electronic market participant can be considered consumers of this particular market with reference to the requirements for the accuracy of its outputs but also for the market liquidity. Both the above mentioned groups of consumers (the operators and the participants themselves expect protection of their specific consumer rights, i.e. securing the two above mentioned functionalities of the market. These functionalities of the electronic market are, however, influenced by many factors, among others by participants’ activity. The article deals with the motivation tools that may improve the quality of the prediction market. In the prediction electronic virtual market there may be situations in which the commonly used tools for increasing business activities described in the published literature are not significantly effective. For such situations we suggest a new type of motivation incentive consisting in penalizing the individual market participants whose funds are not placed in the market. The functionality of the proposed motivation incentive is presented on the example of the existing data gained from the electronic virtual prediction market which is actively operated.

  6. Electronic Submersible Pump (ESP) Technology and Limitations with Respect to Geothermal Systems (Fact Sheet)

    Energy Technology Data Exchange (ETDEWEB)

    2014-09-01

    The current state of geothermal technology has limitations that hinder the expansion of utility scale power. One limitation that has been discussed by the current industry is the limitation of Electric Submersible Pump (ESP) technology. With the exception of a few geothermal fields artificial lift technology is dominated by line shaft pump (LSP) technology. LSP's utilize a pump near or below reservoir depth, which is attached to a power shaft that is attached to a motor above ground. The primary difference between an LSP and an ESP is that an ESP motor is attached directly to the pump which eliminates the power shaft. This configuration requires that the motor is submersed in the geothermal resource. ESP technology is widely used in oil production. However, the operating conditions in an oil field vary significantly from a geothermal system. One of the most notable differences when discussing artificial lift is that geothermal systems operate at significantly higher flow rates and with the potential addition of Enhanced Geothermal Systems (EGS) even greater depths. The depths and flow rates associated with geothermal systems require extreme horsepower ratings. Geothermal systems also operate in a variety of conditions including but not limited to; high temperature, high salinity, high concentrations of total dissolved solids (TDS), and non-condensable gases.

  7. Nanosecond pulse-width electron diode based on dielectric wall accelerator technology

    Science.gov (United States)

    Zhao, Quantang; Zhang, Z. M.; Yuan, P.; Cao, S. C.; Shen, X. K.; Jing, Y.; Yu, C. S.; Li, Z. P.; Liu, M.; Xiao, R. Q.; Zong, Y.; Wang, Y. R.; Zhao, H. W.

    2013-11-01

    An electron diode using a short section of dielectric wall accelerator (DWA) has been under development at the Institute of Modern Physics (IMP), Chinese Academy of Sciences. Tests have been carried out with spark gap switches triggered by lasers. The stack voltage efficiency of a four-layer of Blumleins reached about 60-70% with gas filled spark gap switching. The generated pulse voltage of peak amplitude of 23 kV and pulse width of 5 ns is used to extract and accelerate an electron beam of 320 mA, measured by a fast current transformer. A nanosecond pulse width electron diode was achieved successfully. Furthermore, the principle of a DWA is well proven and the development details and discussions are presented in this article.

  8. Evaluation of some commercial grade polymers as possible dosimeters for technological irradiations in electron accelerators

    CERN Document Server

    Bryl-Sandelewska, T

    2002-01-01

    Dosimetric properties of two kinds of clear polymethylmethacrylate (PMMA)and one kind of polystyrene (PS) sheets in technological accelerator irradiations, are presented. Absorbance of the sheets and its dependence on the dose have been measured at a suitable wavelength using a UV/VIS spectrophotometer. Both kind PMMA can be used for technological dose measurements but each of them in the different range of the doses (approx 3 to approx 30 kGy and approx 30 to above 200 kGy). Heating the samples after irradiation accelerates the stabilization of the absorbance, which change slowly during the storage of the samples if not heated.Absorbance of clear PS sheets decreases very much during the storage after irradiation, and heating of the samples does not accelerate the stabilization of the value. It can be said that the Ps investigated is not suitable for technological dose measurements in accelerator i radiations.

  9. Use and User Perception of Electronic Information Resources: A Case Study of Siva Institute of Frontier Technology, India

    Directory of Open Access Journals (Sweden)

    Velmurugan Chandran

    2013-12-01

    Full Text Available The present study aims to explore the use and user perception of electronic resources in Siva Institute of Frontier Technology, India. A total number of 123 users were taken into account for the study through a questionnaire-based survey method. A well-structured questionnaire was designed and distributed to the selected 200 students and staff members. 123 copies of the questionnaires were returned dully filled in and the overall response rate was 61.50 percent. The questionnaire contained both open- and close-ended questions. The collected data were classified, analyzed, and tabulated by using simple statistical methods. This study covers the impact of electronic resources on students and faculty in their academic pursuit.

  10. Electronically Tunable Current-mode High-order Ladder Low-pass Filters Based on CMOS Technology

    Directory of Open Access Journals (Sweden)

    T. Kunto

    2015-12-01

    Full Text Available This paper describes the design of current mode low-pass ladder filters based on CMOS technology. The filters are derived from passive RLC ladder filter prototypes using new CMOS lossy and lossless integrators. The all-pole and Elliptic approximations are used in the proposed low-pass filter realizations. The proposed two types of filter can be electronically tuned between 10kHz and 100MHz through bias current from 0.03µA to 300µA. The proposed filters use 1.5 V power supply with 3 mW power consumption at 300 µA bias current. The proposed filters are resistorless, use grounded capacitors and are suitable for further integration. The total harmonic distortion (THD of the low-pass filters is less than 1% over the operating frequency range. PSPICE simulation results, obtained by using TSMC 0.18µm technology, confirm the presented theory.

  11. The feasibility of using 'bring your own device' (BYOD) technology for electronic data capture in multicentre medical audit and research.

    Science.gov (United States)

    Faulds, M C; Bauchmuller, K; Miller, D; Rosser, J H; Shuker, K; Wrench, I; Wilson, P; Mills, G H

    2016-01-01

    Large-scale audit and research projects demand robust, efficient systems for accurate data collection, handling and analysis. We utilised a multiplatform 'bring your own device' (BYOD) electronic data collection app to capture observational audit data on theatre efficiency across seven hospital Trusts in South Yorkshire in June-August 2013. None of the participating hospitals had a dedicated information governance policy for bring your own device. Data were collected by 17 investigators for 392 individual theatre lists, capturing 14,148 individual data points, 12, 852 (91%) of which were transmitted to a central database on the day of collection without any loss of data. BYOD technology enabled accurate collection of a large volume of secure data across multiple NHS organisations over a short period of time. Bring your own device technology provides a method for collecting real-time audit, research and quality improvement data within healthcare systems without compromising patient data protection.

  12. Nano-structure multilayer technology fabrication of high energy density capacitors for the power electronic building book

    Energy Technology Data Exchange (ETDEWEB)

    Barbee, T.W.; Johnson, G.W.; Wagner, A.V.

    1997-10-21

    Commercially available capacitors do not meet the specifications of the Power Electronic Building Block (PEBB) concept. We have applied our propriety nanostructure multilayer materials technology to the fabrication of high density capacitors designed to remove this impediment to PEBB progress. Our nanostructure multilayer capacitors will also be enabling technology in many industrial and military applications. Examples include transient suppression (snubber capacitors), resonant circuits, and DC filtering in PEBB modules. Additionally, weapon applications require compact energy storage for detonators and pulsed-power systems. Commercial applications run the gamut from computers to lighting to communications. Steady progress over the last five years has brought us to the threshold of commercial manufacturability. We have demonstrated a working dielectric energy density of > 11 J/cm3 in 20 nF devices designed for 1 kV operation.

  13. Exposure Potential and Health Impacts of Indium and Gallium, Metals Critical to Emerging Electronics and Energy Technologies.

    Science.gov (United States)

    White, Sarah Jane O; Shine, James P

    2016-12-01

    The rapid growth of new electronics and energy technologies requires the use of rare elements of the periodic table. For many of these elements, little is known about their environmental behavior or human health impacts. This is true for indium and gallium, two technology critical elements. Increased environmental concentrations of both indium and gallium create the potential for increased environmental exposure, though little is known about the extent of this exposure. Evidence is mounting that indium and gallium can have substantial toxicity, including in occupational settings where indium lung disease has been recognized as a potentially fatal disease caused by the inhalation of indium particles. This paper aims to review the basic chemistry, changing environmental concentrations, potential for human exposure, and known health effects of indium and gallium.

  14. Measuring Maturity of Use for Electronic Medical Records (EMRs) in British Columbia: The Physician Information Technology Office (PITO).

    Science.gov (United States)

    Rimmer, Carol; Hagens, Simon; Baldwin, Anne; Anderson, Carol J

    2014-01-01

    This article examines British Columbia (BC)'s Physician Information Technology Office's efforts to measure and improve the use of electronic medical records (EMRs) by select practices in BC with an assessment of their progress using a maturity model, and targeted support. The follow-up assessments showed substantial increases in the physicians' scores resulting from action plans that comprised a series of tailored support activities. Specifically, there was an increase from 21% to 83% of physicians who could demonstrate that they used their EMRs as the principal method of record-keeping.

  15. Electronic-nose technology using sputum samples in diagnosis of patients with tuberculosis

    NARCIS (Netherlands)

    Kolk, A.; Hoelscher, M.; Maboko, L.; Jung, J.; Kuijper, S.; Cauchi, M.; Bessant, C.; van Beers, S.; Dutta, R.; Gibson, T.; Reither, K.

    2010-01-01

    We investigated the potential of two different electronic noses (EN; code named "Rob" and "Walter") to differentiate between sputum headspace samples from tuberculosis (TB) patients and non-TB patients. Only samples from Ziehl-Neelsen stain (ZN)- and Mycobacterium tuberculosis culture-positive (TBPO

  16. Electronic States near Dislocations in Transition Metals : An Application of Quantum Chemistry in Technology

    NARCIS (Netherlands)

    Hosson, J.Th.M. De

    1980-01-01

    This paper outlines a model for calculating the localized states of a <100> edge dislocation in α-Fe. The model used for the calculations is based on the multiple-scattering model (SCF-Xα-SW). The purpose of this research is twofold: (1) To determine changes in electronic structure of the lattice ne

  17. Application of electron beam equipment based on a plasma cathode gun in additive technology

    Science.gov (United States)

    Galchenko, N. K.; Kolesnikova, K. A.; Semenov, G. V.; Rau, A. G.; Raskoshniy, S. Y.; Bezzubko, A. V.; Dampilon, B. V.; Sorokova, S. N.

    2016-11-01

    The paper discusses the application of electron beam equipment based on a plasma cathode gun for three-dimensional surface modification of metals and alloys. The effect of substrate surface preparation on the adhesion strength of gas thermal coatings has been investigated.

  18. Teacher-Created Electronic Books: Integrating Technology to Support Readers with Disabilities

    Science.gov (United States)

    Rhodes, Joan A.; Milby, Tammy M.

    2007-01-01

    The No Child Left Behind Act of 2001 holds U.S. schools accountable for the yearly assessment of all students as they progress toward meeting state educational goals. Students with disabilities continue to be a focal point for improving student achievement at the school and district levels. Creating teacher-made electronic books is an effective…

  19. Technical report on "BES Early Career. Control Graphene Electronic Structure for Energy Technology"

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Feng [Univ. of California, Berkeley, CA (United States)

    2015-07-11

    Graphene, a one-atom thick sheet of carbon, exhibits incredible structural flexibility, electrical transport, and optical responses. And remarkably, the graphene electronic structure can be varied through interlayer coupling, nanoscale patterning, and electrical gating. In this project we made significant contribution to better understand and control physical properties of graphene and other novel two-dimensional layered materials.

  20. Theories and technologies of electronic-electrical-mechanical integrated(EEMI)transmission system

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    @@ EEMI is one of the hot spots in cross-disciplinary research. The research in this topic was to discard the traditional mechanical gear reducer, integrate electrical motor with mechanical load, control the electrical motor by electrical power generated by microelectronics and electrical electronics; namely, form a EEMI transmission system in the mechanical equipments with low rotation rate and large rotation torque.

  1. Extending consumer categorization based on innovativeness: Intentions and technology clusters in consumer electronics

    NARCIS (Netherlands)

    Rijnsoever, F.J. van; Castaldi, C.

    2011-01-01

    Consumer categorizations based on innovativeness were originally proposed by E.M. Rogers (2003) and remain of relevance for predicting purchasing behavior in high-tech domains such as consumer electronics. We extend such innovativeness-based categorizations in two directions: We first take into acco

  2. Technology, Identity, and Community: The Role of Electronic Teaching Portfolios in Becoming a Teacher

    Science.gov (United States)

    Trent, John; Shroff, Ronnie H.

    2013-01-01

    This article reports on an exploratory qualitative investigation of an initiative to use an electronic teaching portfolio at a teacher education institution in Hong Kong. Using in-depth interviews, this initiative is examined from the perspective of preservice teachers themselves. Interviews sought to gain an understanding of how the construction…

  3. Nuclear Technology. Course 27: Metrology. Module 27-3, Gage Blocks, Mechanical Comparators and Electronic Comparators.

    Science.gov (United States)

    Selleck, Ben; Espy, John

    This third in a series of eight modules for a course titled Metrology describes gage blocks and mechanical and electronic comparators. The module follows a typical format that includes the following sections: (1) introduction, (2) module prerequisites, (3) objectives, (4) notes to instructor/student, (5) subject matter, (6) materials needed, (7)…

  4. Teacher-Created Electronic Books: Integrating Technology to Support Readers with Disabilities

    Science.gov (United States)

    Rhodes, Joan A.; Milby, Tammy M.

    2007-01-01

    The No Child Left Behind Act of 2001 holds U.S. schools accountable for the yearly assessment of all students as they progress toward meeting state educational goals. Students with disabilities continue to be a focal point for improving student achievement at the school and district levels. Creating teacher-made electronic books is an effective…

  5. Technology Trumping Sleep: Impact of Electronic Media and Sleep in Late Adolescent Students

    Science.gov (United States)

    Moulin, Kerry L.; Chung, Chia-Jung

    2017-01-01

    The purpose of this research study was to explore with what impact evening media use interfered with either schoolwork and/or sufficient healthy sleep. In addition, the study examined with what impact there may be a compromise in students' ability or aptitude for positive academic success, related to either lack of sleep or electronic media use.…

  6. Electronic Reading and Digital Library Technologies: Understanding Learner Expectation and Usage Intent for Mobile Learning

    Science.gov (United States)

    Hyman, Jack A.; Moser, Mary T.; Segala, Laura N.

    2014-01-01

    Mobile information technology is changing the education landscape by offering learners the opportunity to engage in asynchronous, ubiquitous instruction. While there is a proliferation of mobile content management systems being developed for the mobile Web and stand-alone mobile applications, few studies have addressed learner expectations and…

  7. Correlationally Assessing the Relationship of Information Technology Investments in Electronic Medical Records to Business Value

    Science.gov (United States)

    Richardson, Daniel J.

    2009-01-01

    The lag in information exchange and assimilation adoption experienced by modern primary care physicians in the conduct of evidence based medicine may be affecting health care system productivity and patient quality of care. Further, interest in whether or not information technology (IT) investments show an increase in business value has increased…

  8. Assessing Factors Affecting Physician's Intention to Adopt Biometric Authentication Technology in Electronic Medical Records

    Science.gov (United States)

    Corazao, Cesar E.

    2014-01-01

    The Health Insurance Portability and Accountability Act of 1996 (HIPAA) regulated the privacy and security of patient information. Since HIPPA became a law, hospital operators have struggled to comply fully with its security and privacy provisions. The proximity-based biometric authentication (PBBA) technology evolved in last decade to help…

  9. Application Possibilities of Social Marketing Technologies for Publicity of Electronic Government Services

    Directory of Open Access Journals (Sweden)

    Tadas Limba

    2013-08-01

    Full Text Available Nowadays e-government projects and projects in the public sector are changing the consistency and reality of our daily life and will need to be managed by project managers, who uge modern marketing tools and technologies. Social marketing is one of the modern marketing tools and, probably, it is the best tool to provide marketing in public sector project management, It has been changing in different ways since the founding of social marketing: the aim of social marketing, the technologies for using i ; but nowadays it’s hard to imagine public sector projects and, especially, egovernment projects, without using social marketing technologies. The usage of social marketing technologies can improve public sector project management and make the project more attractive to society or some part of it. This scientific paper represents social marketing transformation, the way in which social marketing needs to be used in the public sector project management process and analyses the phases of social marketing. It also gives some practical advics for public sector organizations o, how to implement social marketing in the e-government project deployment process.

  10. Development of Distributed System for Electronic Business Based on Java-Technologies

    Science.gov (United States)

    Kintonova, Aliya Zh.; Andassova, Bakkaisha Z.; Ermaganbetova, Madina A.; Maikibaeva, Elmira K.

    2016-01-01

    This paper describes the results of studies on the peculiarities of distributed information systems, and the research of distributed systems technology development. The paper also provides the results of the analysis of E-business market research in the Republic of Kazakhstan. The article briefly describes the implementation of a possible solution…

  11. Electronic Reading and Digital Library Technologies: Understanding Learner Expectation and Usage Intent for Mobile Learning

    Science.gov (United States)

    Hyman, Jack A.; Moser, Mary T.; Segala, Laura N.

    2014-01-01

    Mobile information technology is changing the education landscape by offering learners the opportunity to engage in asynchronous, ubiquitous instruction. While there is a proliferation of mobile content management systems being developed for the mobile Web and stand-alone mobile applications, few studies have addressed learner expectations and…

  12. Correlationally Assessing the Relationship of Information Technology Investments in Electronic Medical Records to Business Value

    Science.gov (United States)

    Richardson, Daniel J.

    2009-01-01

    The lag in information exchange and assimilation adoption experienced by modern primary care physicians in the conduct of evidence based medicine may be affecting health care system productivity and patient quality of care. Further, interest in whether or not information technology (IT) investments show an increase in business value has increased…

  13. 76 FR 76640 - Telecommunications Act Accessibility Guidelines; Electronic and Information Technology...

    Science.gov (United States)

    2011-12-08

    ... Parts 1193 and 1194 [Docket No. 2011-07] RIN 3014-AA37 Telecommunications Act Accessibility Guidelines... technology, which apply to federal agencies, and its guidelines for telecommunications accessibility, which apply to telecommunications manufacturers. The text of the proposed standards and guidelines...

  14. Development and Application of Novel Electron Transfer Dissociation-based Technologies for Proteomics

    NARCIS (Netherlands)

    Frese, C.

    2013-01-01

    Proteins are key actors in all cellular processes and pathways and almost all diseases are linked to perturbations of proteins, their modification state or interaction networks. Mass spectrometry-based proteomics has matured to a high-throughput quantitative technology, aiming to provide sensitive,

  15. Research on Digital Output Verification Technology of Electronic DC Current Transformer

    Science.gov (United States)

    Chen, Yuanjie; Wang, Bin; Hu, Haoliang; Xiong, Qianzhu; Yang, Chunyan

    2017-05-01

    Aiming at the error of calibration system when conducting field calibration by electronic DC current transformer’s digital calibration system, an electronic DC current transformer’s digital calibration system based on protocol conversion is proposed and researched. Data frames outputted from merging unit are collected and converted by the system, the digital synchronization is realized by using the synchronous clock device to trigger the second pulse, and it is verified by the virtual instrument design software. The field calibration is conducted to some converter station digital dc current transformer under the rated current of 500A by using the calibration system. By calibrating and analyzing errors, the error is less than 0.075% when tested current is more than 40% of the rated current. According the standard in literature[1], performance of the calibration system is perfect, measured results perfectly meet the requirements of design, and the calibration system has great practical application value.

  16. Noise management to achieve superiority in quantum information systems.

    Science.gov (United States)

    Nemoto, Kae; Devitt, Simon; Munro, William J

    2017-08-06

    Quantum information systems are expected to exhibit superiority compared with their classical counterparts. This superiority arises from the quantum coherences present in these quantum systems, which are obviously absent in classical ones. To exploit such quantum coherences, it is essential to control the phase information in the quantum state. The phase is analogue in nature, rather than binary. This makes quantum information technology fundamentally different from our classical digital information technology. In this paper, we analyse error sources and illustrate how these errors must be managed for the system to achieve the required fidelity and a quantum superiority.This article is part of the themed issue 'Quantum technology for the 21st century'. © 2017 The Author(s).

  17. Exploration Technology Developments Program's Radiation Hardened Electronics for Space Environments (RHESE) Project Overview

    Science.gov (United States)

    Keys, Andrew S.; Adams, James H.; Darty, Ronald C.; Patrick, Marshall C.; Johnson, Michael A.; Cressler, John D.

    2008-01-01

    Primary Objective: 1) A computational tool to accurately predict electronics performance in the presence of space radiation in support of spacecraft design: a) Total dose; b) Single Event Effects; and c) Mean Time Between Failure. (Developed as successor to CR ME96.) Secondary Objectives: 2) To provide a detailed description of the natural radiation environment in support of radiation health and instrument design: a) In deep space; b) Inside the magnetosphere; and c) Behind shielding.

  18. A kinetic sensitivity analysis for the SO2 and NOx removal using the electron beam technology

    Science.gov (United States)

    Zwolińska, Ewa; Gogulancea, Valentina; Sun, Yongxia; Lavric, Vasile; Chmielewski, Andrzej

    2017-09-01

    The mathematical modeling of the phenomena taking place during the electron beam flue gas treatment is a complex endeavor due to the different time scales of the processes occurring as accelerated electrons are bombarding the flue gas. The paper presents a complex kinetic model for these gas phase interactions, consisting of 1034 chemical reactions with the participation of 115 reactive species. The mathematical model couples the complex gas phase kinetics with a liquid phase kinetic model, taking into account the nucleation and condensation phenomena occurring due to the presence of sulfuric acid. The modeling results for both coupled and uncoupled gas phase kinetics are validated against a set of literature experimental data with satisfactory outcome. The work aims to identify the most important chemical reactions influencing the pollutants removal, proposing a sensitivity analysis using the concept of generated entropy. To the best of the authors' knowledge a sensitivity analysis of this extent has not been performed for the electron beam flue gas treatment. The results of this analysis emphasize the link between the removal efficiencies of NOx and SO2, the importance of hydroxyl radicals and can aid in future model reduction efforts.

  19. Accelerator-based electron beam technologies for modification of bipolar semiconductor devices

    Science.gov (United States)

    Pavlov, Y. S.; Surma, A. M.; Lagov, P. B.; Fomenko, Y. L.; Geifman, E. M.

    2016-09-01

    Radiation processing technologies for static and dynamic parameters modification of silicon bipolar semiconductor devices implemented. Devices of different classes with wide range of operating currents (from a few mA to tens kA) and voltages (from a few volts to 8 kV) were processed in large scale including power diodes and thyristors, high-frequency bipolar and IGBT transistors, fast recovery diodes, pulsed switching diodes, precise temperature- compensated Zener diodes (in general more than fifty 50 device types), produced by different enterprises. The necessary changes in electrical parameters and characteristics of devices caused by formation in the device structures of electrically active and stable in the operating temperature range sub-nanoscale recombination centres. Technologies implemented in the air with high efficiency and controllability, and are an alternative to diffusion doping of Au or Pt, γ-ray, proton and low-Z ion irradiation.

  20. Understanding intention to use electronic information resources: A theoretical extension of the technology acceptance model (TAM).

    Science.gov (United States)

    Tao, Donghua

    2008-11-06

    This study extended the Technology Acceptance Model (TAM) by examining the roles of two aspects of e-resource characteristics, namely, information quality and system quality, in predicting public health students' intention to use e-resources for completing research paper assignments. Both focus groups and a questionnaire were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that perceived usefulness played a major role in determining students' intention to use e-resources. Perceived usefulness and perceived ease of use fully mediated the impact that information quality and system quality had on behavior intention. The research model enriches the existing technology acceptance literature by extending TAM. Representing two aspects of e-resource characteristics provides greater explanatory information for diagnosing problems of system design, development, and implementation.

  1. Multidisciplinary Approach to the Science and Technology of Sub-Micron Electronics.

    Science.gov (United States)

    1987-03-10

    made (Drs. Schwank and Fogler (Task 1)). In the latter project the presence of the metal is found to strongly influence the structural stability of...research results in each of the three subtasks. TASK 1: PREPARATION AND CHARACTERIZATION OF ULTRASMALL METAL CLUSTERS J. Schwank and H.S. Fogler ...Director of institute of Science and Technology R. Clarke Associate Professor of Physics and Director of Ultra-small Structures Research Office H.S. Fogler

  2. Soft X-Ray (1-7 nm) Solar Spectrometer based on novel Nanowriter Electron-Beam Nanofabrication Technology

    Science.gov (United States)

    Didkovsky, L. V.; Wieman, S. R.; Chao, W.

    2015-12-01

    A new soft X-ray (SXR) spectrometer combines proven detector technology demonstrated on the SOHO Solar EUV Monitor (SOHO/SEM) and SDO EUV SpectroPhotometer (SDO/EVE/ESP) instruments with novel technology for X-ray optics nanofabrication developed at the Lawrence Berkeley National Laboratory. The new spectrometer will provide solar SXR measurements of absolute irradiance in the 1.0 to 7.0 nm range spectrally resolved into bands narrower than 1 nm - measurements that are not available from existing solar-observing instruments but are important for studying and modeling coronal dynamics and the Sun-Earth's connection, e.g. the Earth's Ionosphere. For the proposed SXR spectrometer we will introduce a transmission grating based on novel Nanowriter Electron-Beam Nanofabrication technology developed at the Center for X-ray Optics (CXRO) at the Lawrence Berkeley National Laboratory. The CXRO technology has been used in the fabrication of X-ray zone plates with feature sizes as small as 25 nm in optical elements with overall sizes on the order of 1 cm. The CXRO technology has significant flexibility in terms of pattern geometry, and is thus capable of producing linear transmission gratings with aperture sizes similar to SEM and ESP but with four times the dispersion. With such dispersion, reasonable spectral resolution (< 1nm) can be obtained using commercial off-the shelf (COTS) X-ray sensitive AXUV type silicon photodiodes from the Optodiode Corp. in an instrument with overall size and mass similar to that of SEM or ESP.

  3. State of the Art in Electronic Assistive Technologies for People with Dementia

    Science.gov (United States)

    Lou, Ricardo Castellot; Giuliano, Angele; Mulvenna, Maurice D.

    It is estimated by 2050 that one-third of Europe's population will be over 60. Life expectancy has on average already risen by 2.5 years per decade and the number of old people aged 80+ is expected to grow by 180%. Nowadays, there are 5.5 million cases of Alzheimer-afflicted people in Europe and more new cases being added every year. In fact Alzheimer's disease has been called the "plague of the twenty-first century". There is currently no cure for this disease; however, prevention and early diagnosis may play a huge role in delaying the onset of the worst effects of this severe disease. Modern technologies could have an important role to satisfy main needs of people with dementia. Nonetheless, despite recent advancements in information and communication technologies and growing sales numbers, industry has been rather reluctant to standardise access technologies and to implement them in a "Design for All approach". Because of this, in last years, there have been launched in Europe a great number of initiatives, both public and private, which try to improve the situation of those persons who suffer this ailment and that will be detailed in this chapter.

  4. 75 FR 28542 - Superior Resource Advisory Committee

    Science.gov (United States)

    2010-05-21

    ... orient the new Superior Resource Advisory Committee members on their roles and responsibilities. DATES... of the roles and responsibilities of the Superior Resource Advisory Committee members; Election of... Forest Service Superior Resource Advisory Committee AGENCY: Forest Service, USDA. ACTION: Notice...

  5. [The superior laryngeal nerve and the superior laryngeal artery].

    Science.gov (United States)

    Lang, J; Nachbaur, S; Fischer, K; Vogel, E

    1987-01-01

    Length, diameter and anastomoses of the nervus vagus and its ganglion inferius were measured 44 halved heads. On the average, 8.65 fiber bundles of the vagus nerve leave the retro-olivary area. In the area of the jugular foramen is the near superior ganglion of the 10th cranial nerve. In this area were found 1.48 (mean value) anastomoses with the 9th cranial nerve. 11.34 mm below the margo terminalis sigmoidea branches off the ramus internus of the accessory nerve which has a length of 9.75 mm. Further anastomoses with the 10th cranial nerve were found. The inferior ganglion of the 10th nerve had a length of 25.47 mm and a diameter of 3.46 mm. Five mm below the ganglion the 10th nerve had a width of 2.9 and a thickness of 1.5 mm. The mean length of the superior sympathetic ganglion was 26.6 mm, its width 7.2 and its thickness 3.4 mm. In nearly all specimens anastomoses of the superior sympathetic ganglion with the ansa cervicalis profunda and the inferior ganglion of the 10th cranial nerve were found. The superior laryngeal nerve branches off about 36 mm below the margo terminalis sigmoidea. The width of this nerve was 1.9 mm, its thickness 0.8 mm on the right and 1.0 mm on the left side. The division in the internal and external rami was found about 21 mm below its origin. Between the n. vagus and thyreohyoid membrane the ramus internus had a length of 64 mm, the length of external ramus between the vagal nerve and the inferior pharyngeal constrictor muscle was 89 mm. Its mean length below the thyreopharyngeal part was 10.7 mm, 8.6 branchlets to the cricothyroid muscle were counted. The superior laryngeal artery had its origin in 80% of cases in the superior thyroideal artery, in 6.8% this vessel was a branch of the external carotid artery. Its average outer diameter was 1.23 mm on the right side and 1.39 mm on the left. The length of this vessel between its origin and the thyreohyoid membrane was 34 mm. In 7% on the right side and in 13% on the left, the superior

  6. Proposal for an ad hoc computer network in the military electronic systems department at the military academy applying bluetooth technology

    Directory of Open Access Journals (Sweden)

    Miroslav R. Terzić

    2011-01-01

    Full Text Available The historical development of the Bluetooth module is given in the introduction of this paper. The importance of the Bluetooth standard for wireless connection on small distances is shown as well. The organization of the Department of Military Electronic Systems is presented with its area of duties, subordinate sections and deployment. The concept of a local area network for this Department, using Bluetooth technology, includes network topology and working regimes based on the main characteristics and technical specifications for the connection with Bluetooth technology. The Department's disperse computer network is proposed as a scatter net where one piconetwork includes the Head of Department and the Heads of Sections while other piconetworks are formed from the Heads of Sections and their subordinates. The security aspect of the presented network deals with basic computer network attack categories, protection methods and aspects. The paper concludes with some recommendations for the local area network using Bluetooth technology with respect to its economical and security aspects as well as to the managing principles of the Department.

  7. Power Electronics – Key Technology for Renewable Energy Systems – Status and Future

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Yang, Yongheng; Ma, Ke

    2013-01-01

    The energy paradigms in many countries (e.g. Germany and Denmark) have experienced a significant change from fossil-based resources to clean renewables in the past few decades. The scenario of highly penetrated renewables is going to be further enhanced. This requires that the production...... play an essential role. Using highly efficient power electronics in power generation, power transmission/ distribution and end-user application, together with advanced control solutions, can pave the way for renewable energies. In view of this, some of the most emerging renewable energies, e.g. wind...

  8. Power Electronics – The Key Technology for Renewable Energy System Integration

    DEFF Research Database (Denmark)

    Blaabjerg, Frede; Yang, Yongheng; Ma, Ke

    2015-01-01

    The energy paradigms in many countries (e.g. Germany and Denmark) have experienced a significant change from fossil-based resources to clean renewables (e.g. wind turbines and photovoltaics) in the past few decades. The scenario of highly penetrated renewables is going to be further enhanced...... solutions makes the way for renewable energies. In light of this, some of the most emerging renewable energies, e.g. wind energy and photovoltaic, which by means of power electronics are changing character as a major part in the electricity generation, are explored in this presentation. Issues like...

  9. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  10. Overview of space power electronic's technology under the CSTI High Capacity Power Program

    Science.gov (United States)

    Schwarze, Gene E.

    1994-01-01

    The Civilian Space Technology Initiative (CSTI) is a NASA Program targeted at the development of specific technologies in the areas of transportation, operations and science. Each of these three areas consists of major elements and one of the operation's elements is the High Capacity Power element. The goal of this element is to develop the technology base needed to meet the long duration, high capacity power requirements for future NASA initiatives. The High Capacity Power element is broken down into several subelements that includes energy conversion in the areas of the free piston Stirling power converter and thermoelectrics, thermal management, power management, system diagnostics, and environmental compatibility and system's lifetime. A recent overview of the CSTI High capacity Power element and a description of each of the program's subelements is given by Winter (1989). The goals of the Power Management subelement are twofold. The first is to develop, test, and demonstrate high temperature, radiation-resistant power and control components and circuits that will be needed in the Power Conditioning, Control and Transmission (PCCT) subsystem of a space nuclear power system. The results obtained under this goal will also be applicable to the instrumentation and control subsystem of a space nuclear reactor. These components and circuits must perform reliably for lifetimes of 7-10 years. The second goal is to develop analytical models for use in computer simulations of candidate PCCT subsystems. Circuits which will be required for a specific PCCT subsystem will be designed and built to demonstrate their performance and, also, to validate the analytical models and simulations. The tasks under the Power Management subelement will now be described in terms of objectives, approach and present status of work.

  11. Panel presentation at international symposium for electronic art 'Waves of technology'

    OpenAIRE

    Flaxton, T.

    2015-01-01

    This panel was formed to create a picture of, then interrogate the tsunami-like effect of the expanding capabilities of moving-image capture and display and place this within a reading of history that proposed that technology comes upon us insistently like waves upon the beach and that this situation is of our making. \\ud \\ud Panel Chair, Professor Terry Flaxton University of the West of England. Introduction 10 minutes: The concept of ‘Waves of technology’. Then part 2, 10 minutes: Examinati...

  12. SAW filter manufacture and piezoelectric materials evaluation based on printed electronics technology

    Science.gov (United States)

    Liu, Xiao-chen; Li, Kun; Xuan, Xiu-wei; Cao, Yang; Teng, Jian-fu

    2014-09-01

    In this paper, the silver nanoparticle ink and ink-jet printing technology are used to manufacture the surface acoustic wave (SAW) filters. The characteristics of three common substrate piezoelectric materials of ST-quartz, Y36°-LiTaO3 and Y128°-LiNbO3 are evaluated. The experimental results show that Y128°-LiNbO3 matches the ink much better than others. The printed SAW filter with Y128°-LiNbO3 as piezoelectric substrate is realized, and its center frequency and bandwidth are 18.4 MHz and 500 kHz, respectively.

  13. Technology basis and perspectives on focused electron beam induced deposition and focused ion beam induced deposition

    Energy Technology Data Exchange (ETDEWEB)

    Rius, Gemma, E-mail: rius.gemma@nitech.ac.jp

    2014-12-15

    The main characteristics of focused electron beam induced deposition (FEBID) and focused ion beam induced deposition (FIBID) are presented. FEBID and FIBID are two nanopatterning techniques that allow the fabrication of submicron patterns with nanometer resolution on selected locations of any kind of substrate, even on highly structured supports. The process consists of mask less serial deposition and can be applied to a wide variety of materials, depending strictly on the precursor material source used. The basic mechanism of FEBID and FIBID is the adsorption of volatile precursor molecules onto the sample surface and decomposition of the molecules induced by the energetic electron and ion focused beams. The essential similarities of the two techniques are presented and especial emphasis is dedicated to highlighting their main differences, such as aspects related to resolution, deposition rate, deposits purity, substrate integrity, etc. In both cases, the factors interplay and complex mechanisms are still understood in a qualitative basis, so much work can still be done in terms of modeling and simulating the processes involved in FEBID and FIBID. Current work on FEBID and FIBID is presented through examples of achievements, interesting results and novel approaches.

  14. What are Millian Qualitative Superiorities?

    Directory of Open Access Journals (Sweden)

    Jonathan Riley

    2008-04-01

    Full Text Available In an article published in Prolegomena 2006, Christoph Schmidt-Petri has defended his interpretation and attacked mine of Mill’s idea that higher kinds of pleasure are superior in quality to lower kinds, regardless of quantity. Millian qualitative superiorities as I understand them are infinite superiorities. In this paper, I clarify my interpretation and show how Schmidt-Petri has misrepresented it and ignored the obvious textual support for it. As a result, he fails to understand how genuine Millian qualitative superiorities determine the novel structure of Mill’s pluralistic utilitarianism, in which a social code of justice that distributes equal rights and duties takes absolute priority over competing considerations. Schmidt-Petri’s own interpretation is a non-starter, because it does noteven recognize that Mill is talking about different kinds of pleasant feelings, such that the higher kinds are intrinsically more valuable than the lower. I conclude by outlining why my interpretation is free of any metaphysical commitment to the “essence” of pleasure.

  15. Isolated superior mesenteric artery dissection

    Directory of Open Access Journals (Sweden)

    Lalitha Palle

    2010-01-01

    Full Text Available Isolated superior mesenteric artery (SMA dissection without involvement of the aorta and the SMA origin is unusual. We present a case of an elderly gentleman who had chronic abdominal pain, worse after meals. CT angiography, performed on a 64-slice CT scanner, revealed SMA dissection with a thrombus. A large artery of Drummond was also seen. The patient was managed conservatively.

  16. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies

    Directory of Open Access Journals (Sweden)

    Joana M Dantas

    2015-07-01

    Full Text Available Multiheme cytochromes have been implicated in Geobacter sulfurreducens (Gs extracellular electron transfer (EET. These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by Gs. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of Gs multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of Gs by characterizing a family of five triheme cytochromes (PpcA-E. These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell’s outer surface. The results obtained suggested that PpcA can couple e-/H+ transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e-/H+ transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of Gs. For the first time Gs strains have been manipulated by the introduction of mutant forms of essential proteins with the aim to develop and improve

  17. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies.

    Science.gov (United States)

    Dantas, Joana M; Morgado, Leonor; Aklujkar, Muktak; Bruix, Marta; Londer, Yuri Y; Schiffer, Marianne; Pokkuluri, P Raj; Salgueiro, Carlos A

    2015-01-01

    Multiheme cytochromes have been implicated in Geobacter sulfurreducens extracellular electron transfer (EET). These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by G. sulfurreducens. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of G. sulfurreducens multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of G. sulfurreducens by characterizing a family of five triheme cytochromes (PpcA-E). These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell's outer surface. The results obtained suggested that PpcA can couple e(-)/H(+) transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e(-)/H(+) transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of G. sulfurreducens. For the first time G. sulfurreducens strains have been manipulated by the introduction of mutant forms of essential

  18. Rational engineering of Geobacter sulfurreducens electron transfer components: a foundation for building improved Geobacter-based bioelectrochemical technologies

    Science.gov (United States)

    Dantas, Joana M.; Morgado, Leonor; Aklujkar, Muktak; Bruix, Marta; Londer, Yuri Y.; Schiffer, Marianne; Pokkuluri, P. Raj; Salgueiro, Carlos A.

    2015-01-01

    Multiheme cytochromes have been implicated in Geobacter sulfurreducens extracellular electron transfer (EET). These proteins are potential targets to improve EET and enhance bioremediation and electrical current production by G. sulfurreducens. However, the functional characterization of multiheme cytochromes is particularly complex due to the co-existence of several microstates in solution, connecting the fully reduced and fully oxidized states. Over the last decade, new strategies have been developed to characterize multiheme redox proteins functionally and structurally. These strategies were used to reveal the functional mechanism of G. sulfurreducens multiheme cytochromes and also to identify key residues in these proteins for EET. In previous studies, we set the foundations for enhancement of the EET abilities of G. sulfurreducens by characterizing a family of five triheme cytochromes (PpcA-E). These periplasmic cytochromes are implicated in electron transfer between the oxidative reactions of metabolism in the cytoplasm and the reduction of extracellular terminal electron acceptors at the cell's outer surface. The results obtained suggested that PpcA can couple e−/H+ transfer, a property that might contribute to the proton electrochemical gradient across the cytoplasmic membrane for metabolic energy production. The structural and functional properties of PpcA were characterized in detail and used for rational design of a family of 23 single site PpcA mutants. In this review, we summarize the functional characterization of the native and mutant proteins. Mutants that retain the mechanistic features of PpcA and adopt preferential e−/H+ transfer pathways at lower reduction potential values compared to the wild-type protein were selected for in vivo studies as the best candidates to increase the electron transfer rate of G. sulfurreducens. For the first time G. sulfurreducens strains have been manipulated by the introduction of mutant forms of essential

  19. A escrita no Ensino Superior

    Directory of Open Access Journals (Sweden)

    Maria Conceição Pillon Christofoli

    2013-01-01

    Full Text Available http://dx.doi.org/10.5902/198464445865 O presente artigo trata de apresentar resultados oriundos de pesquisa realizada no Ensino Superior, enfocando a escrita em contextos universitários. Depoimentos por parte dos acadêmicos evidenciam certa resistência ao ato de escrever, o que acaba muitas vezes distanciando o sujeito da produção de um texto. Assim sendo, mesmo que parciais, os resultados até então analisados dão conta de que: pressuposto 1 – há ruptura da ideia de coerência entre o que pensamos, o que conseguimos escrever, o que entende nosso interlocutor; pressuposto 2 – a autocorreção de textos como exercício de pesquisa é imprescindível para a qualificação da escrita; pressuposto 3 – os diários de aula representam rico instrumento para a qualificação da escrita no Ensino Superior; pressuposto 4 – há necessidade de que o aluno do Ensino Superior escreva variados tipos de escrita, ainda que a universidade cumpra com seu papel, enfatizando a escrita acadêmica; pressuposto 5 – o trabalho com a escrita no Ensino Superior deve enfatizar os componentes básicos da expressão escrita: o código escrito e a composição da escrita. Palavras-chave: Escrita; Ensino Superior; formação de professores.

  20. A Study on Electronic-Money Technology Using Near Field Communication

    Directory of Open Access Journals (Sweden)

    Min Soo Jung

    2014-12-01

    Full Text Available Recently, due to the introduction of NFC (Near Field Communication, it has become possible to make easy electronic payments. Therefore, a secure communication method is necessary in these environments. NFC can be said to be relatively safe compared to other communication methods, because it carries out communications within 10 cm. However, it has made possible the risk of impersonation attacks by a disguised reader, leaving user information on the reader. In order to solve these problems, in this paper, we propose an authentication scheme that can reduce the weight of computation by using only a hash function and XOR (eXclusive OR operation algorithms. This paper also shows that our method is safe, since it leaves no information with the other party.

  1. Emerging technologies to power next generation mobile electronic devices using solar energy

    Institute of Scientific and Technical Information of China (English)

    Dewei JIA; Yubo DUAN; Jing LIU

    2009-01-01

    Mobile electronic devices such as MP3, mobile phones, and wearable or implanted medical devices have already or will soon become a necessity in peoples' lives.However, the further development of these devices is restricted not only by the inconvenient charging process of the power module, but also by the soaring prices of fossil fuel and its downstream chain of electricity manipulation.In view of the huge amount of solar energy fueling the world biochemically and thermally, a carry-on electricity harvester embedded in portable devices is emerging as a most noteworthy research area and engineering practice for a cost efficient solution. Such a parasitic problem is intrinsic in the next generation portable devices. This paper is dedicated to presenting an overview of the photovoltaic strategy in the chain as a reference for researchers and practitioners committed to solving the problem.

  2. A photosynthetic biosensor with enhanced electron transfer generation realized by laser printing technology.

    Science.gov (United States)

    Touloupakis, Eleftherios; Boutopoulos, Christos; Buonasera, Katia; Zergioti, Ioanna; Giardi, Maria Teresa

    2012-04-01

    One of the limits of current electrochemical biosensors is a lack of methods providing stable and highly efficient junctions between biomaterial and solid-state devices. This paper shows how laser-induced forward transfer (LIFT) can enable efficient electron transfer from photosynthetic biomaterial immobilized on screen-printed electrodes (SPE). The ideal pattern, in terms of photocurrent signal of thylakoid droplets giving a stable response signal with a current intensity of approximately 335 ± 13 nA for a thylakoid mass of 28 ± 4 ng, was selected. It is shown that the efficiency of energy production of a photosynthetic system can be strongly enhanced by the LIFT process, as demonstrated by use of the technique to construct an efficient and sensitive photosynthesis-based biosensor for detecting herbicides at nanomolar concentrations.

  3. Design and Fabrication of Nanoscale IDTs Using Electron Beam Technology for High-Frequency SAW Devices

    Directory of Open Access Journals (Sweden)

    Wei-Che Shih

    2014-01-01

    Full Text Available High-frequency Rayleigh-mode surface acoustic wave (SAW devices were fabricated for 4G mobile telecommunications. The RF magnetron sputtering method was adopted to grow piezoelectric aluminum nitride (AlN thin films on the Si3N4/Si substrates. The influence of sputtering parameters on the crystalline characteristics of AlN thin films was investigated. The interdigital transducer electrodes (IDTs of aluminum (Al were then fabricated onto the AlN surfaces by using the electron beam (e-beam direct write lithography method to form the Al/AlN/Si3N4/Si structured SAW devices. The Al electrodes were adopted owing to its low resistivity, low cost, and low density of the material. For 4G applications in mobile telecommunications, the line widths of 937 nm, 750 nm, 562 nm, and 375 nm of IDTs were designed. Preferred orientation and crystalline properties of AlN thin films were determined by X-ray diffraction using a Siemens XRD-8 with CuKα radiation. Additionally, the cross-sectional images of AlN thin films were obtained by scanning electron microscope. Finally, the frequency responses of high-frequency SAW devices were measured using the E5071C network analyzer. The center frequencies of the high-frequency Rayleigh-mode SAW devices of 1.36 GHz, 1.81 GHz, 2.37 GHz, and 3.74 GHz are obtained. This study demonstrates that the proposed processing method significantly contributes to high-frequency SAW devices for wireless communications.

  4. Development of free electron laser and accelerator technology in Poland (CARE and EuCARD projects)

    CERN Document Server

    Romaniuk, Ryszard

    2009-01-01

    The development of accelerator technology in Poland is strictly combined with the cooperation with specialist accelerator centers of global character, where the relevant knowledge is generated, allowing to build big and modern machines. These are relatively costly undertakings of interdisciplinary character. Most of them are financed from the local resources. Only the biggest machines are financed commonly by many nations like: LHC in CERN, ILC in Fermi Lab, E-XFEL in DESY. A similar financing solution has to be implemented in Poland, where a scientific and political campaign is underway on behalf of building two big machines, a Polish Synchrotron in Kraków and a Polish FEL in Świerk. Around these two projects, there are realized a dozen or so smaller ones.

  5. Impact of information technology on vendor objectives, capabilities, and competences in contract electronic manufacturing

    DEFF Research Database (Denmark)

    Perunovic, Zoran; Mefford, Robert; Christoffersen, Mads

    2012-01-01

    Many factors influence the success of an outsourcing arrangement but vendor capabilities have been recognized as one of the main contributors. This paper investigates how information technology (IT) utilization contributes to success in outsourcing. We take a vendor's perspective and study how...... IT impacts vendor capabilities. The research framework integrates four concepts/theories: the resource-based view (RBV), the concept of manufacturing strategy, the concept of business performance, and the concept of IT impact on business performance. Two case companies are studied, one with a high level...... of IT development and another for which this is not the case. The results show that IT impacts vendor objectives indirectly by impacting competences and capabilities. Two types of impact of IT on competences and capabilities have been identified: IT as a competence enabler and IT as a capability enhancer. The most...

  6. Metallurgical challenges in microelectronic 3D IC packaging technology for future consumer electronic products

    Institute of Scientific and Technical Information of China (English)

    K.; N.; TU; TIAN; Tian

    2013-01-01

    Metallurgical challenges in controlling the microstructural stability of Cu and solder microbumps in 3D IC packaging technol-ogy are discussed. Using uni-directional <111> oriented nanotwinned Cu, the controlled growth of oriented Cu6Sn5 on the nanotwinned Cu and its transformation to Cu3Sn without Kirkendall voids have been achieved. In order to join a stack of Si chips into a 3D device, multiple reflows of solder microbumps may be required; we consider localized heating to do so by the use of self-sustained explosive reaction in multi-layered Al/Ni thin films of nano thickness. It avoids re-melting of those solder joints which have been formed already in the 3D stacking structure.

  7. Intention to use and actual use of electronic information resources: further exploring Technology Acceptance Model (TAM).

    Science.gov (United States)

    Tao, Donghua

    2009-11-14

    Following up a previous study that examined public health students' intention to use e-resources for completing research paper assignments, the present study proposed two models to investigate whether or not public health students actually used the e-resources they intended to use and whether or not the determinants of intention to use predict actual use of e-resources. Focus groups and pre- and post-questionnaires were used to collect data. Descriptive analysis, data screening, and Structural Equation Modeling (SEM) techniques were used for data analysis. The study found that the determinants of intention-to-use significantly predict actual use behavior. Direct impact of perceived usefulness and indirect impact of perceived ease of use to both behavior intention and actual behavior indicated the importance of ease of use at the early stage of technology acceptance. Non-significant intention-behavior relationship prompted thoughts on the measurement of actual behavior and multidimensional characteristics of the intention construct.

  8. The development of a room temperature electron cyclotron resonance ion source (Lanzhou electron cyclotron resonance ion source No. 4) with evaporative cooling technology at Institute of Modern Physics

    Energy Technology Data Exchange (ETDEWEB)

    Lu, W., E-mail: luwang@impcas.ac.cn; Sun, L. T.; Qian, C.; Feng, Y. C.; Ma, H. Y.; Zhang, X. Z.; Ma, B. H.; Zhao, H. W. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 73000 (China); Guo, J. W.; Fang, X.; Yang, Y. [Institute of Modern Physics, Chinese Academy of Sciences, Lanzhou 73000 (China); University of Chinese Academy of Sciences, Beijing 100049 (China); Xiong, B.; Guo, S. Q.; Ruan, L. [Institute of Electrical Engineering, CAS, Beijing 100190 (China)

    2015-04-15

    LECR4 (Lanzhou electron cyclotron resonance ion source No. 4) has been successfully constructed at IMP and has also been connected with the Low Energy Beam Transport (LEBT) and Radio Frequency Quadrupole (RFQ) systems. These source magnet coils are cooled through evaporative cooling technology, which is the first attempt with an ECR ion source in the world. The maximum mirror field is 2.5 T (with iron plug) and the effective plasma chamber volume is 1.2 l. It was designed to be operated at 18 GHz and aimed to produce intense multiple charge state heavy ion beams for the linear injector project SSC-Linac at IMP. In February 2014, the first analyzed beam at 18 GHz was extracted. During about three months’ commissioning, some outstanding results have been achieved, such as 1.97 emA of O{sup 6+}, 1.7 emA of Ar{sup 8+}, 1.07 emA of Ar{sup 9+}, and 118 euA of Bi{sup 28+}. The source has also successfully delivered O{sup 5+} and Ar{sup 8+} ion beams for RFQ commissioning in April 2014. This paper will give a brief overview of the design of LECR4. Then, the latest results of this source at 18 GHz will be presented.

  9. The development of a room temperature electron cyclotron resonance ion source (Lanzhou electron cyclotron resonance ion source No. 4) with evaporative cooling technology at Institute of Modern Physics.

    Science.gov (United States)

    Lu, W; Sun, L T; Qian, C; Guo, J W; Fang, X; Feng, Y C; Yang, Y; Ma, H Y; Zhang, X Z; Ma, B H; Xiong, B; Guo, S Q; Ruan, L; Zhao, H W

    2015-04-01

    LECR4 (Lanzhou electron cyclotron resonance ion source No. 4) has been successfully constructed at IMP and has also been connected with the Low Energy Beam Transport (LEBT) and Radio Frequency Quadrupole (RFQ) systems. These source magnet coils are cooled through evaporative cooling technology, which is the first attempt with an ECR ion source in the world. The maximum mirror field is 2.5 T (with iron plug) and the effective plasma chamber volume is 1.2 l. It was designed to be operated at 18 GHz and aimed to produce intense multiple charge state heavy ion beams for the linear injector project SSC-Linac at IMP. In February 2014, the first analyzed beam at 18 GHz was extracted. During about three months' commissioning, some outstanding results have been achieved, such as 1.97 emA of O(6+), 1.7 emA of Ar(8+), 1.07 emA of Ar(9+), and 118 euA of Bi(28+). The source has also successfully delivered O(5+) and Ar(8+) ion beams for RFQ commissioning in April 2014. This paper will give a brief overview of the design of LECR4. Then, the latest results of this source at 18 GHz will be presented.

  10. Reformulação e expansão dos cursos superiores de tecnologia no Brasil: as dificuldades da retomada da educação profissional Reformulación y expansión de los cursos superiores de tecnología en Brasil: las dificultades de la retomada de la educación profesional Reformulation and expansion of the higher technological courses in Brazil: the difficulties of the professional education retaken

    Directory of Open Access Journals (Sweden)

    Adriana Roseli Wünsch Takahashi

    2008-06-01

    causada por la llegada y diseminación de nuevas tecnologías. Con tales consideraciones, este artículo se propone a discutir el papel de organizador del Estado y las políticas públicas implementadas en los últimos años para la reformulación e expansión del sistema profesional de educación, en especifico en los Cursos Superiores de Tecnología. Por fin, se intenta ofrecer referencias para la organización de una agenda de pesquisas para la mejoría de las políticas públicas para esta área, bien como de sus formas de evaluación de impacto.The discussions about the retaken of the professional education in Brazil as the responsible for encouraging the labor market insertion and also the social inclusions have other important subjects like the development of the Economy Based on Knowledge- EBK and the National Innovation System diffusion. In this point of view, the educational sector is considered an essential base, composed by the Universities and their ability to create and transfer knowledge for the whole society. The duty of the higher technological education, which is one sector of the higher education, is to provide quick and high level quality labor to fill the blanks left by the appearance and dissemination of new technologies. This paper presents the State's organizer role and public politics which have been implemented to reformulate and to expand the professional educational system, especially the Technological Colleges. And it also intends to offer references to organize a scheduled research to improve public politics in this area and its impact evaluation forms.

  11. Low power analog front-end electronics in deep submicrometer CMOS technology based on gain enhancement techniques

    Energy Technology Data Exchange (ETDEWEB)

    Gómez-Galán, J.A., E-mail: jgalan@uhu.es [Dpto de Ingeniería Electrónica, Sist. Informáticos y Automática, Universidad de Huelva (Spain); Sánchez-Rodríguez, T.; Sánchez-Raya, M.; Martel, I. [Dpto de Ingeniería Electrónica, Sist. Informáticos y Automática, Universidad de Huelva (Spain); López-Martín, A. [Dpto de Ingeniería Eléctrica y Electrónica, Universidad Pública de Navarra (Spain); Carvajal, R.G. [Dpto de Ingeniería Electrónica, Universidad de Sevilla (Spain); Ramírez-Angulo, J. [Klipsch School of Electrical Engineering, New Mexico State University (United States)

    2014-06-01

    This paper evaluates the design of front-end electronics in modern technologies to be used in a new generation of heavy ion detectors—HYDE (FAIR, Germany)—proposing novel architectures to achieve high gain in a low voltage environment. As conventional topologies of operational amplifiers in modern CMOS processes show limitations in terms of gain, novel approaches must be raised. The work addresses the design using transistors with channel length of no more than double the feature size and a supply voltage as low as 1.2 V. A front-end system has been fabricated in a 90 nm process including gain boosting techniques based on regulated cascode circuits. The analog channel has been optimized to match a detector capacitance of 5 pF and exhibits a good performance in terms of gain, speed, linearity and power consumption.

  12. Discussion on Electrical and electronic technology teaching%电工及电子技术教学探讨

    Institute of Scientific and Technical Information of China (English)

    焦灵侠

    2015-01-01

    In this paper,in order to cultivate the students' creative thinking as the goal,optimize the teaching content,combined with modern teaching methods,linking theory with practice,increase the basic experiment,improve students' learning ability and comprehensive ability,made some attempts in electrical and electronic technology teaching reform in the non electrical majors.%本文以培养学生创造性思维为目标,优化教学内容,结合现代化教学手段,理论联系实践,增加基础性实验,提高学生学习能力和综合能力,在非电类专业电工及电子技术教学改革中做了一些尝试。

  13. High-temperature electron irradiation and radiation-thermal technology for utilization, purification and production of some metals

    CERN Document Server

    Solovetskii, Y; Lunin, V

    1998-01-01

    High-temperature irradiation by the beam of 1.2-1.6 MeV accelerated electrons has been used for production Pt, Pd, Mo, Co, Cu and Ni from desactivated Pt(Pd)-containing reforming catalysts, molybdenum sulfide hydrodesulphurization catalysts and hydrogenation catalyst waste material. The radiation-induced decomposition of supported Ni(Co)-Mo/Al sub 2 O sub 3 sulfide catalyst and organic fragments of hydrogenation catalyst wastes has been studied. Radiolysis product distributions are shown as function of time (time up to 1,0 h) and temperature (570-1400K). There was made a principle scheme of the first technological unit for radiation-thermal utilization, purification and production of some metals from solid wastes material.

  14. How nanoscience translates into technology: the case of self-assembled monolayers, electron-beam writing, and carbon nanomembranes.

    Science.gov (United States)

    Palmer, R E; Robinson, A P G; Guo, Q

    2013-08-27

    One of the great quests in nanotechnology is to translate nanoprecision materials science into practical manufacturing processes. The paper by Angelova et al. in this issue of ACS Nano, which discusses the production of functional carbon-based membranes with a thickness of 0.5 to 3 nm, provides instructive insight into how researchers are pulling together complementary strands from a quarter century of nanoscience research to develop novel, hybrid processing schemes. In this Perspective, we reflect on the progress that is taking place in the two principal component technologies combined in this scheme, namely, (i) control of self-assembled monolayers, including their detailed atomic structures, and (ii) electron-induced manipulation and processing of molecular layers, as well as considering (iii) remaining challenges for thin membrane production in the future.

  15. Engineering materials properties and process technologies for electronic and energy applications

    Science.gov (United States)

    Hailey, Anna Kathryn

    In this thesis, we pushed the boundaries of knowledge toward exciting new alternatives in the fields of electronic materials and energy. In Part 1, we focused on organic semiconductors, assessing how disorder on different length scales impacts the electrical properties in organic thin-film transistors (OTFTs). We first explored the effect of disorder at the molecular scale due to the coexistence of isomers in thin films. By blending fractional quantities of syn and anti isomers of triethylsilylethynyl anthradithiophene (TES ADT), we found that the electrical properties of devices comprising the anti isomer plummet to that of syn after the addition of only 10% syn. Through single-crystal computational analysis, we determined that the addition of syn disorders the two-dimensional electronic coupling between anti molecules, thereby increasing charge trapping and decreasing mobilities in OTFTs with increasing syn concentrations in the active layers. We also elucidated the impact of disorder stemming from boundaries between crystalline superstructures in polycrystalline thin films. By measuring the electrical characteristics of OTFTs across interspherulite boundaries (ISBs) in TES ADT and rubrene thin films, we found the energy barriers for charge transport across ISBs to be more akin to those found across the boundaries between polymer crystallites than between conventional molecular-semiconductor grains. In contrast to sharp, creviced grain boundaries, ISBs presumably comprise trapped molecules that electrically connect neighboring spherulites, as polymer chains connect crystallites in polymer-semiconductor thin films. In Part 2, we turned our focus to the production of alternative liquid fuels, evaluating process designs to produce "drop-in" replacement diesel and gasoline from non-food biomass and domestic natural gas. By considering the storage of captured byproduct CO2 in nearby depleted shale-gas wells, these processes produce liquid fuels with low

  16. Hard electronics; Hard electronics

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    In the fields of power conversion devices and broadcasting/communication amplifiers, high power, high frequency and low losses are desirable. Further, for electronic elements in aerospace/aeronautical/geothermal surveys, etc., heat resistance to 500degC is required. Devices which respond to such hard specifications are called hard electronic devices. However, with Si which is at the core of the present electronics, the specifications cannot fully be fulfilled because of the restrictions arising from physical values. Accordingly, taking up new device materials/structures necessary to construct hard electronics, technologies to develop these to a level of IC were examined and studied. They are a technology to make devices/IC of new semiconductors such as SiC, diamond, etc. which can handle higher temperature, higher power and higher frequency than Si and also is possible of reducing losses, a technology to make devices of hard semiconducter materials such as a vacuum microelectronics technology using ultra-micro/high-luminance electronic emitter using negative electron affinity which diamond, etc. have, a technology to make devices of oxides which have various electric properties, etc. 321 refs., 194 figs., 8 tabs.

  17. [New technologies and nursing. Use and perception of primary health care nurses about electronic health record].

    Science.gov (United States)

    Galimany Masclans, Jordi; Garrido Aguilar, Eva; Roca Roger, Montse; Girbau García, M Rosa

    2012-09-01

    To analyze the nurses make use of electronic health records (EHR) and assess their perception of it. A descriptive cross-sectional observational study was conducted in 2010 analyzing the nurses' perceptions of adult and pediatric consultations of primary health care teams in Baix Llobregat (Catalonia) in which the EHR is used. The study variables were: registration of care, continuity of care, training, usability and sociodemographic composition of the sample. The statistical analysis was descriptive. Nurses agree that EHR provides "continuity of care" in relation to nursing care (mean 2.03, Sd.0.83) and overall (mean 2.19, 5d.0.83). Show indifference to the "usability" of the EHR (mean 3.26, Sd.0.5), to facilitate the "record information" (mean 2.69, Sd.0.68) and the need for "training" in the use of EHR (mean 2.6, 5d.0.59). It has been found that with increasing age of the nurse, it shows more agreement that the EHR provides greater continuity of care overall. The average ratings of the continuum of care nurse, recording of information, continuity of care in general are greater the lead time using the EHR. The nurses' perceptions regarding the EHR are positive in that it provides continuity of care and to exchange information on patient health data.

  18. Electron multibeam technology for mask and wafer writing at 0.1 nm address grid

    Science.gov (United States)

    Platzgummer, Elmar; Klein, Christof; Loeschner, Hans

    2013-07-01

    IMS Nanofabrication realized a 50 keV electron multibeam proof-of-concept (POC) tool confirming writing principles with 0.1 nm address grid and lithography performance capability. The POC system achieves the predicted 5 nm 1 sigma blur across the 82 μm×82 μm array of 512×512 (262,144) programmable 20 nm beams. 24-nm half pitch (HP) has been demonstrated and complex patterns have been written in scanning stripe exposure mode. The first production worthy system for the 11-nm HP mask node is scheduled for 2014 (Alpha), 2015 (Beta), and first-generation high-volume manufacturing multibeam mask writer (MBMW) tools in 2016. In these MBMW systems the max beam current through the column is 1 μA. The new architecture has also the potential for 1× mask (master template) writing. Substantial further developments are needed for maskless e-beam direct write (EBDW) applications as a beam current of >2 mA is needed to achieve 100 wafer per hour industrial targets for 300 mm wafer size. Necessary productivity enhancements of more than three orders of magnitude are only possible by shrinking the multibeam optics such that 50 to 100 subcolumns can be placed on the area of a 300 mm wafer and by clustering 10 to 20 multicolumn tools. An overview of current EBDW efforts is provided.

  19. Product assurance technology for procuring reliable, radiation-hard, custom LSI/VLSI electronics

    Science.gov (United States)

    Buehler, M. G.; Allen, R. A.; Blaes, B. R.; Hicks, K. A.; Jennings, G. A.; Lin, Y.-S.; Pina, C. A.; Sayah, H. R.; Zamani, N.

    1989-01-01

    Advanced measurement methods using microelectronic test chips are described. These chips are intended to be used in acquiring the data needed to qualify Application Specific Integrated Circuits (ASIC's) for space use. Efforts were focused on developing the technology for obtaining custom IC's from CMOS/bulk silicon foundries. A series of test chips were developed: a parametric test strip, a fault chip, a set of reliability chips, and the CRRES (Combined Release and Radiation Effects Satellite) chip, a test circuit for monitoring space radiation effects. The technical accomplishments of the effort include: (1) development of a fault chip that contains a set of test structures used to evaluate the density of various process-induced defects; (2) development of new test structures and testing techniques for measuring gate-oxide capacitance, gate-overlap capacitance, and propagation delay; (3) development of a set of reliability chips that are used to evaluate failure mechanisms in CMOS/bulk: interconnect and contact electromigration and time-dependent dielectric breakdown; (4) development of MOSFET parameter extraction procedures for evaluating subthreshold characteristics; (5) evaluation of test chips and test strips on the second CRRES wafer run; (6) two dedicated fabrication runs for the CRRES chip flight parts; and (7) publication of two papers: one on the split-cross bridge resistor and another on asymmetrical SRAM (static random access memory) cells for single-event upset analysis.

  20. Avaliação docente em relação às novas tecnologias para a didática e atenção no ensino superior Teacher evaluation in relation to new technologies for teaching and attention in higher education

    Directory of Open Access Journals (Sweden)

    Luciana Lozza de Moraes Marchiori

    2011-07-01

    Full Text Available Discute-se a importância da atenção no ensino/aprendizagem na universidade em conexão com as novas tecnologias, propondo-se de forma simples, o aprimoramento do desempenho do professor universitário em relação a estas tecnologias, visando à melhoria da atenção do aluno no ensino superior.It discusses the importance of attention in teaching and learning at the university in connection with new technologies, proposing, in a simple way to improve the performance of university teachers vis-à-visthese technologies, with the purpose of improving student attention in higher education.

  1. Electronic technology of mosquitoes control and repelling%电子驱灭蚊蝇技术的研究

    Institute of Scientific and Technical Information of China (English)

    王钧; 陈明媛

    2013-01-01

      蚊蝇等害虫对人类的健康构成了危害。蚊香、灭蚊剂等传统的驱灭蚊子方法不仅使它们产生了抗药性,而且会造成环境污染[1]。本文通过分析蚊子的生活特性,利用现代电子技术、仿生学和物理技术等非化学方法实现了绿色驱灭蚊子。经实验研究,该方法比传统的方法更加环保、高效。%Pests such as mosquitoes are harm to human's health. Driving and killing mosquitoes by mosquito-repellent incense and anopheline in the traditional ways not only cause their developed resistance, and will cause environmental pollution [1]. Through analysis of the characteristics of mosquitoes, the modern electronic technology, bionics and physical technology, not chemical methods, have been realized controlling and repelling mosquitoes. After experimental research, the idea is better than the traditional method, with more environmental protection, high efficiency.

  2. The CMS fast beams condition monitor back-end electronics based on MicroTCA technology: status and development

    Science.gov (United States)

    Zagozdzinska, Agnieszka A.; Dabrowski, Anne E.; Pozniak, Krzysztof T.

    2015-09-01

    The Fast Beams Condition Monitor (BCM1F), upgraded for LHC Run II, is used to measure the online luminosity and machine induced background for the CMS experiment. The detector consists of 24 single-crystal CVD diamond sensors that are read out with a custom fast front-end chip fabricated in 130 nm CMOS technology. Since the signals from the sensors are used for real time monitoring of the LHC conditions they are processed by dedicated back-end electronics to measure separately rates corresponding to LHC collision products, machine induced background and residual activation exploiting different arrival times. The system is built in MicroTCA technology and uses high speed analog-to-digital converters. In operational modes of high rates, consecutive events, spaced in time by less than 12.5 ns, may cause partially overlapping events. Hence, novel signal processing techniques are deployed to resolve overlapping peaks. The high accuracy qualification of the signals is crucial to determine the luminosity and the machine induced background rates for the CMS experiment and the LHC.

  3. Electronic Government and Electronic Participation

    NARCIS (Netherlands)

    Tambouris, E.; Scholl, H.J.; Janssen, M.F.W.H.A.; Wimmer, M.A.; Tarabanis, K.; Gascó, M.; Klievink, A.J.; Lindgren, I.; Milano, M.; Panagiotopoulos, P.; Pardo, T.A.; Parycek, P.; Sæbø, O.

    2015-01-01

    Electronic government and electronic participation continue to transform the public sector and society worldwide and are constantly being transformed themselves by emerging information and communication technologies. This book presents papers from the 14th International Federation for Information P

  4. Pensamiento Superior y Desarrollo Territorial

    Directory of Open Access Journals (Sweden)

    Víctor Manuel Racancoj Alonzo

    2015-04-01

    Full Text Available Esta reflexión pretende explicar el papel, fundamental, que juega el pensamiento superior, en la formulación y la práctica de modelos de desarrollo territorial local; para que contribuyan de forma sustantiva, en la transformación de las condiciones socioeconómicas adversas que hoy viven comunidades indígenas y rurales de muchos países, como Guatemala, situación que puede resumirse en altos índices de pobreza y desnutrición. Pero, el pensamiento superior, debe ser competencia de la población con pertenencia a lo local, pues si y solo si esta condición existe, se dará validez y viabilidad al desarrollo territorial. Para alcanzar competencias de pensamiento superior, en los espacios locales, se tiene que superar obstáculos en el modelo de universidad, que hoy estamos familiarizados a ver y pensar; modelos que tienen las características de: herencia colonial, disfunción con la problemática económica, cultural, social y política de la sociedad y la negación de los saberes ancestrales.

  5. Superior sulcus tumors (Pancoast tumors).

    Science.gov (United States)

    Marulli, Giuseppe; Battistella, Lucia; Mammana, Marco; Calabrese, Francesca; Rea, Federico

    2016-06-01

    Superior Sulcus Tumors, frequently termed as Pancoast tumors, are a wide range of tumors invading the apical chest wall. Due to its localization in the apex of the lung, with the potential invasion of the lower part of the brachial plexus, first ribs, vertebrae, subclavian vessels or stellate ganglion, the superior sulcus tumors cause characteristic symptoms, like arm or shoulder pain or Horner's syndrome. The management of superior sulcus tumors has dramatically evolved over the past 50 years. Originally deemed universally fatal, in 1956, Shaw and Paulson introduced a new treatment paradigm with combined radiotherapy and surgery ensuring 5-year survival of approximately 30%. During the 1990s, following the need to improve systemic as well as local control, a trimodality approach including induction concurrent chemoradiotherapy followed by surgical resection was introduced, reaching 5-year survival rates up to 44% and becoming the standard of care. Many efforts have been persecuted, also, to obtain higher complete resection rates using appropriate surgical approaches and involving multidisciplinary team including spine surgeon or vascular surgeon. Other potential treatment options are under consideration like prophylactic cranial irradiation or the addition of other chemotherapy agents or biologic agents to the trimodality approach.

  6. Utilización y funcionalidad de los recursos tecnológicos y de las nuevas tecnologías en la educación superior Use and functionality of the technological resources and of the new technologies in higher education

    Directory of Open Access Journals (Sweden)

    Elías Blanco

    2009-12-01

    Full Text Available En el artículo se estudia el grado de utilización que realiza el profesorado de los recursos tecnológicos y se analiza su funcionalidad pedagógica en la enseñanza superior de las carreras de educación en España y Portugal. El diseño de investigación se aborda desde el estudio de caso, analizando la situación objeto de estudio en ambos países. La investigación desarrollada es de corte transversal y combina el estudio extensivo con el intensivo. Se ha recurrido al cuestionario para la toma de datos del alumnado y a la realización de grupos de discusión con el profesorado. Entre las conclusiones se constata que el profesorado de las carreras de educación de España y Portugal continua utilizando en mayor medida los recursos tecnológicos tradicionales que los nuevos avances digitales. Las funciones educativas de aplicación más habitual son las de ejemplificar los modelos de enseñanza-aprendizaje, motivar, transmitir información y estructurar contenidos.This paper studies the quantitative use of technological resources by teachers. It analyzes their pedagogical functionality in education courses both in Spain and Portugal. Its methodological approach is based on case studies and an analysis of the situation of the study object in both countries. This transverse research combines extensive and intensive studies. A questionnaire was used to gather data concerning students and discussion groups among teachers were created. One of its conclusions is that, both in Spain and Portugal, teachers lecturing in education undergraduate courses still make more use of the analogical, traditional technological resources than of the new digital advances. The educational functions more commonly applied consist of exemplifying teaching and learning models, motivating, transmitting information and structuring content.

  7. The hospital outpatient alcohol project (HOAP): protocol for an individually randomized, parallel-group superiority trial of electronic alcohol screening and brief intervention versus screening alone for unhealthy alcohol use.

    Science.gov (United States)

    Johnson, Natalie A; Kypri, Kypros; Saunders, John B; Saitz, Richard; Attia, John; Dunlop, Adrian; Doran, Christopher; McElduff, Patrick; Wolfenden, Luke; McCambridge, Jim

    2013-09-03

    Electronic screening and brief intervention (e-SBI) is a promising alternative to screening and brief intervention by health-care providers, but its efficacy in the hospital outpatient setting, which serves a large proportion of the population, has not been established. The aim of this study is to estimate the effect of e-SBI in hospital outpatients with hazardous or harmful drinking. This randomized controlled trial will be conducted in the outpatient department of a large tertiary referral hospital in Newcastle (population 540,000), Australia. Some 772 adults with appointments at a broad range of medical and surgical outpatient clinics who score 5-9 inclusive on the Alcohol Use Disorders Identification Test-Consumption (AUDIT-C) subscale will be randomly assigned in a 1:1 ratio to electronic alcohol screening alone (control) or to e-SBI. As randomization will be effected by computer, researchers and participants (who will be invited to participate in a study of alcohol use over time) will be blinded to group assignment. The primary analysis will be based on the intention-to-treat principle and compare weekly volume (grams of alcohol) and the full AUDIT score with a six-month reference period between the groups six months post randomization. Secondary outcomes, assessed six and 12 months after randomization, will include drinking frequency, typical occasion quantity, proportion who report binge drinking, proportion who report heavy drinking, and health-care utilization. If e-SBI is efficacious in outpatient settings, it offers the prospect of systematically and sustainably reaching a large number of hazardous and harmful drinkers, many of whom do not otherwise seek or receive help. Australian New Zealand Clinical Trials Registry ACTRN12612000905864.

  8. The use of electronic mail at the reference desk: impact of a computer-mediated communication technology on librarian-client interactions.

    Science.gov (United States)

    Schilling-Eccles, K; Harzbecker, J J

    1998-01-01

    Commonly recognized computer-mediated communication (CMC) tools include virtual environments, bibliographic databases, listservers, newsgroups, group teleconferencing, interactive messaging systems and electronic mail. The use of these technologies in libraries has grown exponentially over the past decade. Electronic mail has emerged as an especially popular communication tool for librarians, and their colleagues and patrons. This paper explores the use of a reference department electronic mail service and its impact on reference services and librarian-client interactions. Several issues related to the implementation of CMC technologies are presented, including the maintenance and monitoring of reference electronic mail systems, the types of questions that are typically posted, and potential barriers to the implementation and use of reference e-mail.

  9. 电子封装中各向异性导电胶的可靠性%Reliability aspects of electronics packaging technology using anisotropic conductive adhesives

    Institute of Scientific and Technical Information of China (English)

    刘建影; 路秀真; 曹立强

    2007-01-01

    Anisotropic conductive adhesive technology for electronics packaging and interconnect application has significantly been developed during the last few years. It is time to make a summary of what has been done in this field. The present paper reviews the technology development, especially from the reliability point of view. It is pointed out that anisotropic conductive adhesives are now widely used in many applications and the reliability data and models have been developed to a large extent for anisotropic conductive adhesives in various applications.

  10. Entidades fiscalizadoras superiores y accountability

    OpenAIRE

    Estela Moreno, María

    2016-01-01

    OBJETIVOS DE LA TESIS: El objetivo general del trabajo es establecer el nivel de eficacia de las Entidades Fiscalizadoras Superiores (EFS) como agencia asignada y herramienta de accountability horizontal, a través de la valoración de su diseño institucional y de la calidad de sus productos finales, los informes de auditoría, estableciéndose los siguientes objetivos específicos: 1. Relevar las nociones de accountability, actualizando el Estado del Arte de la cuestión. 2. Analizar la ...

  11. Using High-Technology Simulators to Prepare Anesthesia Providers Before Implementation of a New Electronic Health Record Module: A Technical Report.

    Science.gov (United States)

    Weintraub, Ari Y; Deutsch, Ellen S; Hales, Roberta L; Buchanan, Newton A; Rock, Whitney L; Rehman, Mohamed A

    2017-06-01

    Learning to use a new electronic anesthesia information management system can be challenging. Documenting anesthetic events, medication administration, and airway management in an unfamiliar system while simultaneously caring for a patient with the vigilance required for safe anesthesia can be distracting and risky. This technical report describes a vendor-agnostic approach to training using a high-technology manikin in a simulated clinical scenario. Training was feasible and valued by participants but required a combination of electronic and manual components. Further exploration may reveal simulated patient care training that provides the greatest benefit to participants as well as feedback to inform electronic health record improvements.

  12. Pharmacists' views on integrated electronic prescribing systems: associations between usefulness, pharmacological safety, and barriers to technology use.

    Science.gov (United States)

    Rahimi, Bahlol; Timpka, Toomas

    2011-02-01

    Integrated electronic prescribing systems (IEPSs) are expected to improve efficiency and safety in the management of pharmaceuticals throughout the healthcare sector. In Sweden (population 9 million), more than 25 million e-prescriptions each year are processed in the National IEPS. We set out to examine the introduction of an IEPS into pharmacists' practice with regard to impact on work efficiency and pharmacological safety. A questionnaire was distributed to all pharmacists (n = 74) in a Swedish municipality (population 145,000), where an IEPS had recently been introduced. The response rate was 70%. The IEPS was in general perceived to have expedited the processing of prescriptions and reduced the risk for prescription errors as well as the handing over of erroneous medications to patients. We found that there was a positive correlation between usefulness of the IEPS system for work efficacy and pharmacological safety, respectively (r =0 .524, p IEPS for work efficacy and perception of barriers to technology use (r = -0.010, p > 0.05). We also found that there was a negative correlation between IEPS usefulness for pharmacological safety and that barriers to IEPS technology use were experienced (r = 0.031, p > 0.05). The results indicate that reduction of system unavailability due to technical issues will increase the perceived usefulness of IEPSs for pharmacists with regard to both work efficacy and pharmacological safety. We conclude that the introduction of an IEPS was well received by pharmacists; however, barriers to full acceptance remained, in particular, system unavailability due to technical problems.

  13. Locomotor Stimulant and Rewarding Effects of Inhaling Methamphetamine, MDPV, and Mephedrone via Electronic Cigarette-Type Technology.

    Science.gov (United States)

    Nguyen, Jacques D; Aarde, Shawn M; Cole, Maury; Vandewater, Sophia A; Grant, Yanabel; Taffe, Michael A

    2016-10-01

    Although inhaled exposure to drugs is a prevalent route of administration for human substance abusers, preclinical models that incorporate inhaled exposure to psychomotor stimulants are not commonly available. Using a novel method that incorporates electronic cigarette-type technology to facilitate inhalation, male Wistar rats were exposed to vaporized methamphetamine (MA), 3,4-methylenedioxypyrovalerone (MDPV), and mephedrone (4-methylmethcathinone) in propylene glycol vehicle using concentrations ranging from 12.5 to 200 mg/ml. Rats exhibited increases in spontaneous locomotor activity, measured by implanted radiotelemetry, following exposure to methamphetamine (12.5 and 100 mg/ml), MDPV (25, 50, and 100 mg/ml), and mephedrone (200 mg/ml). Locomotor effects were blocked by pretreatment with the dopamine D1-like receptor antagonist SCH23390 (10 μg/kg, intraperitoneal (i.p.)). MA and MDPV vapor inhalation also altered activity on a running wheel in a biphasic manner. An additional group of rats was trained on a discrete trial intracranial self-stimulation (ICSS) procedure interpreted to assess brain reward status. ICSS-trained rats that received vaporized MA, MDPV, or mephedrone exhibited a significant reduction in threshold of ICSS reward compared with vehicle. The effect of vapor inhalation of the stimulants was found comparable to the locomotor and ICSS threshold-reducing effects of i.p. injection of mephedrone (5.0 mg/kg), MA (0.5-1.0 mg/kg), or MDPV (0.5-1.0 mg/kg). These data provide robust validation of e-cigarette-type technology as a model for inhaled delivery of vaporized psychostimulants. Finally, these studies demonstrate the potential for human use of e-cigarettes to facilitate covert use of a range of psychoactive stimulants. Thus, these devices pose health risks beyond their intended application for the delivery of nicotine.

  14. Process design kit and circuits at a 2 µm technology node for flexible wearable electronics applications (Conference Presentation)

    Science.gov (United States)

    Torres-Miranda, Miguel; Petritz, Andreas; Gold, Herbert; Stadlober, Barbara

    2016-09-01

    In this work we present our most advanced technology node of organic thin film transistors (OTFTs) manufactured with a channel length as short as 2 μm by contact photolithography and a self-alignment process directly on a plastic substrate. Our process design kit (PDK) is described with P-type transistors, capacitors and 3 metal layers for connections of complex circuits. The OTFTs are composed of a double dielectric layer with a photopatternable ultra thin polymer (PNDPE) and alumina, with a thickness on the order of 100 nm. The organic semiconductor is either Pentacene or DNTT, which have a stable average mobility up to 0.1 cm2/Vs. Finally, a polymer (e.g.: Parylene-C) is used as a passivation layer. We describe also our design rules for the placement of standard circuit cells. A "plastic wafer" is fabricated containing 49 dies. Each die of 1 cm2 has between 25 to 50 devices, proving larger scale integration in such a small space, unique in organic technologies. Finally, we present the design (by simulations using a Spice model for OTFTs) and the test of analog and digital basic circuits: amplifiers with DC gains of about 20 dB, comparators, inverters and logic gates working in the frequency range of 1-10 kHz. These standard circuit cells could be used for signal conditioning and integrated as active matrices for flexible sensors from 3rd party institutions, thus opening our fab to new ideas and sophisticated pre-industrial low cost applications for the emerging fields of biomedical devices and wearable electronics for virtual/augmented reality.

  15. Technology

    Directory of Open Access Journals (Sweden)

    Xu Jing

    2016-01-01

    Full Text Available The traditional answer card reading method using OMR (Optical Mark Reader, most commonly, OMR special card special use, less versatile, high cost, aiming at the existing problems proposed a method based on pattern recognition of the answer card identification method. Using the method based on Line Segment Detector to detect the tilt of the image, the existence of tilt image rotation correction, and eventually achieve positioning and detection of answers to the answer sheet .Pattern recognition technology for automatic reading, high accuracy, detect faster

  16. The sentence superiority effect revisited.

    Science.gov (United States)

    Snell, Joshua; Grainger, Jonathan

    2017-11-01

    A sentence superiority effect was investigated using post-cued word-in-sequence identification with the rapid parallel visual presentation (RPVP) of four horizontally aligned words. The four words were presented for 200ms followed by a post-mask and cue for partial report. They could form a grammatically correct sentence or were formed of the same words in a scrambled agrammatical sequence. Word identification was higher in the syntactically correct sequences, and crucially, this sentence superiority effect did not vary as a function of the target's position in the sequence. Cloze probability measures for words at the final, arguably most predictable position, revealed overall low values that did not interact with the effects of sentence context, suggesting that these effects were not driven by word predictability. The results point to a level of parallel processing across multiple words that enables rapid extraction of their syntactic categories. These generate a sentence-level representation that constrains the recognition process for individual words, thus facilitating parallel word processing when the sequence is grammatically sound. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Private visit to the CMS assembly site of Dr. Fidel Castro Diaz-Balart from the Superior Institute of Sciences and Nuclear Technologies, Havana, accompanied by His Excellency Mr. Emilio Caballero, Ambassador, Permanent Mission of Cuba in Paris.

    CERN Document Server

    Maximilien Brice

    2002-01-01

    Photo 01: Left to right: His Excellency Mr Emilio Caballero; Prof. Tejinder Virdee, Deputy Spokesman of the CMS experiment; Dr Fidel Castro Diaz-Balart; Dr Matthias Schroeder, physicist, Experimental Physics division; Mrs Noëlle Levy, Casa del Habano, Geneva; Dr John Ellis, Adviser for Non-Member State relations; Dr Christian Roche, Senior Advisor to the Director-General. Photo 02: Left to right: His Excellency Mr Emilio Caballero, Prof. Tejinder Virdee, Dr Fidel Castro Diaz-Balart; Dr Matthias Schroeder; Mrs Noëlle Levy, Prof. Juan Antonio Rubio, Head of the Education and Technology Transfer division; Dr John Ellis.

  18. Electron beam accelerators—trends in radiation processing technology for industrial and environmental applications in Latin America and the Caribbean

    Science.gov (United States)

    Parejo Calvo, Wilson A.; Duarte, Celina L.; Machado, Luci Diva B.; Manzoli, Jose E.; Geraldo, Aurea Beatriz C.; Kodama, Yasko; Silva, Leonardo Gondim A.; Pino, Eddy S.; Somessari, Elizabeth S. R.; Silveira, Carlos G.; Rela, Paulo R.

    2012-08-01

    The radiation processing technology for industrial and environmental applications has been developed and used worldwide. In Latin America and the Caribbean and particularly in Brazil there are 24 and 16 industrial electron beam accelerators (EBA) respectively with energy from 200 keV to 10 MeV, operating in private companies and governmental institutions to enhance the physical and chemical properties of materials. However, there are more than 1500 high-current electron beam accelerators in commercial use throughout the world. The major needs and end-use markets for these electron beam (EB) units are R and D, wire and electric cables, heat shrinkable tubes and films, PE foams, tires, components, semiconductors and multilayer packaging films. Nowadays, the emerging opportunities in Latin America and the Caribbean are paints, adhesives and coatings cure in order to eliminate VOCs and for less energy use than thermal process; disinfestations of seeds; and films and multilayer packaging irradiation. For low-energy EBA (from 150 keV to 300 keV). For mid-energy EBA (from 300 keV to 5 MeV), they are flue gas treatment (SO2 and NOX removal); composite and nanocomposite materials; biodegradable composites based on biorenewable resources; human tissue sterilization; carbon and silicon carbide fibers irradiation; irradiated grafting ion-exchange membranes for fuel cells application; electrocatalysts nanoparticles production; and natural polymers irradiation and biodegradable blends production. For high-energy EBA (from 5 MeV to 10 MeV), they are sterilization of medical, pharmaceutical and biological products; gemstone enhancement; treatment of industrial and domestic effluents and sludge; preservation and disinfestations of foods and agricultural products; soil disinfestations; lignocellulosic material irradiation as a pretreatment to produce ethanol biofuel; decontamination of pesticide packing; solid residues remediation; organic compounds removal from wastewater; and

  19. Inkjet printing as a roll-to-roll compatible technology for the production of large area electronic devices on a pre-industrial scale

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.J.; Groen, P.

    2014-01-01

    Inkjet printing is a promising approach towards the solution processing of electronic devices on an industrial scale. Of particular interest is the production of high-end applications such as large area OLEDs on flexible substrates. Roll-to-roll (R2R) processing technologies involving inkjet printin

  20. The Role of the Electronic Portfolio in Enhancing Information and Communication Technology and English Language Skills: The Voices of Six Malaysian Undergraduates

    Science.gov (United States)

    Thang, Siew Ming; Lee, Yit Sim; Zulkifli, Nurul Farhana

    2012-01-01

    This study investigated the effects of the construction and development of electronic portfolios (e-portfolios) on a small user population at a public university in Malaysia. The study was based on a three-month Information and Communication Technology (ICT) and language learning course offered to the undergraduates of the university. One of the…

  1. Inkjet printing as a roll-to-roll compatible technology for the production of large area electronic devices on a pre-industrial scale

    NARCIS (Netherlands)

    Teunissen, P.; Rubingh, E.; Lammeren, T. van; Abbel, R.J.; Groen, P.

    2014-01-01

    Inkjet printing is a promising approach towards the solution processing of electronic devices on an industrial scale. Of particular interest is the production of high-end applications such as large area OLEDs on flexible substrates. Roll-to-roll (R2R) processing technologies involving inkjet

  2. Benefits and Risks of Electronic Medical Record (EMR): An Interpretive Analysis of Healthcare Consumers' Perceptions of an Evolving Health Information Systems Technology

    Science.gov (United States)

    Thompson, Chester D.

    2013-01-01

    The purpose of this study is to explore healthcare consumers' perceptions of their Electronic Medical Records (EMRs). Although there have been numerous studies regarding EMRs, there have been minimal, if any, research that explores healthcare consumers' awareness of this technology and the social implications that result. As consumers' health…

  3. Design and properties of silicon charged-particle detectors developed at the Institute of Electron Technology (ITE)

    Science.gov (United States)

    Wegrzecki, Maciej; Bar, Jan; Budzyński, Tadeusz; CieŻ, Michal; Grabiec, Piotr; Kozłowski, Roman; Kulawik, Jan; Panas, Andrzej; Sarnecki, Jerzy; Słysz, Wojciech; Szmigiel, Dariusz; Wegrzecka, Iwona; Wielunski, Marek; Witek, Krzysztof; Yakushev, Alexander; Zaborowski, Michał

    2013-07-01

    The paper discusses the design of charged-particle detectors commissioned and developed at the Institute of Electron Technology (ITE) in collaboration with foreign partners, used in international research on transactinide elements and to build personal radiation protection devices in Germany. Properties of these detectors and the results obtained using the devices are also presented. The design of the following epiplanar detector structures is discussed: ♢ 64-element chromatographic arrays for the COMPACT (Cryo On-line Multidetector for Physics And Chemistry of Transactinides) detection system used at the GSI Helmholtzzentrum für Schwerionenforschung in Darmstadt (GSI) for research on Hassium, Copernicium and Flerovium, as well as elements 119 and 120, ♢ 2-element flow detectors for the COLD (Cryo On-Line Detector) system used for research on Copernicium and Flerovium at the Joint Institute for Nuclear Research, Dubna, ♢ detectors for a radon exposimeter and sensors for a neutron dosimeter developed at the Institut für Strahlenschutz, Helmholtz Zentrum München. The design of planar detectors - single-sided and double-sided strip detectors for the Focal Plane Detector Box used at GSI for research on Flerovium and elements 119 and 120 is also discussed.

  4. Development of prostate cancer research database with the clinical data warehouse technology for direct linkage with electronic medical record system.

    Science.gov (United States)

    Choi, In Young; Park, Seungho; Park, Bumjoon; Chung, Byung Ha; Kim, Choung-Soo; Lee, Hyun Moo; Byun, Seok-Soo; Lee, Ji Youl

    2013-01-01

    In spite of increased prostate cancer patients, little is known about the impact of treatments for prostate cancer patients and outcome of different treatments based on nationwide data. In order to obtain more comprehensive information for Korean prostate cancer patients, many professionals urged to have national system to monitor the quality of prostate cancer care. To gain its objective, the prostate cancer database system was planned and cautiously accommodated different views from various professions. This prostate cancer research database system incorporates information about a prostate cancer research including demographics, medical history, operation information, laboratory, and quality of life surveys. And, this system includes three different ways of clinical data collection to produce a comprehensive data base; direct data extraction from electronic medical record (EMR) system, manual data entry after linking EMR documents like magnetic resonance imaging findings and paper-based data collection for survey from patients. We implemented clinical data warehouse technology to test direct EMR link method with St. Mary's Hospital system. Using this method, total number of eligible patients were 2,300 from 1997 until 2012. Among them, 538 patients conducted surgery and others have different treatments. Our database system could provide the infrastructure for collecting error free data to support various retrospective and prospective studies.

  5. Towards a Traceability System Based on RFID Technology to Check the Content of Pallets within Electronic Devices Supply Chain

    Directory of Open Access Journals (Sweden)

    Ignacio Angulo

    2013-01-01

    Full Text Available In the last few years there has been a growing interest in smart solutions capable of dealing with the traceability of products and materials to improve logistical processes. Most of the existing solutions have been designed without considering the difficulties of deploying traceability systems in the storehouses currently working, not dealing with specific needs, such as environment characteristics or time required to be handled by workers. In this paper, in order to test the viability of its application, a first prototype of a traceability system capable of checking the content of pallets loaded with electronic devices is presented. It is based on ultra-high frequency (UHF radio frequency identification (RFID technology using passive tags. A holistic approach has been adopted to design the system: it begins with a radioelectrical characterization of the environment where the check points will be implemented, continues with the integration of a set of data acquisition and wireless communication devices, and ends with a logistics information system able to provide final user services. The combination of physical layer analysis with a top layer system view can aid the planning as well as operational phase of this type of RFID system within a logistic chain.

  6. Towards possible opportunities in nuclear materials science and technology at an X-ray free electron laser research facility

    Science.gov (United States)

    Froideval, A.; Badillo, A.; Bertsch, J.; Churakov, S.; Dähn, R.; Degueldre, C.; Lind, T.; Paladino, D.; Patterson, B. D.

    2011-09-01

    Spectroscopy and imaging of condensed matter have benefited greatly from the availability of intense X-ray beams from synchrotron sources, both in terms of spatial resolution and of elemental specificity. The advent of the X-ray free electron laser (X-ray FEL) provides the additional features of ultra-short pulses and high transverse coherence, which greatly expand possibilities to study dynamic processes and to image non-crystalline materials. The proposed SwissFEL facility at the Paul Scherrer Institute is one of at present four X-ray FEL projects worldwide and is scheduled to go into operation in the year 2017. This article describes a selection of problems in nuclear materials science and technology that would directly benefit from this and similar X-ray FEL sources. X-ray FEL-based experiments are proposed to be conducted on nuclear energy-related materials using single-shot X-ray spectroscopy, coherent X-ray scattering and/or X-ray photon correlation spectroscopy in order to address relevant scientific questions such as the evolution in time of the irradiation-induced damage processes, the deformation processes in nuclear materials, the ion diffusion processes in the barrier systems of geological repositories, the boiling heat transfer in nuclear reactors, as well as the structural characterization of graphite dust in advanced nuclear reactors and clay colloid aggregates in the groundwater near a radioactive waste repository.

  7. 中职电子技术教学初探%On Teaching of Electronics Technology in Secondary Vocational Schools

    Institute of Scientific and Technical Information of China (English)

    蔡清水

    2015-01-01

    通过调查研究发现中职学生就业后很长时间不能独立顶岗,其原因在于传统模式的中职电子技术基本知识与技能被分散在不同的教材或知识模块中,技能训练缺乏一定的系统性和可操作性。本研究从“实验-综合-引导”式的教学方法出发,就中职学校电子技术教学的开展进行探索。%A survey has found that secondary vocational students are not able to fulfil their duties in workplace in-dependently even long after graduation. The paper puts forward that the main reason is that in traditional curriculum system, the basic knowledge and skills are found scattering about different teaching materials and knowledge modules. The skill training is not systematic and practical. Thus, the paper introduces the“experiment-comprehensive learning-elicitation”mode and explores its application in the teaching of electronic technology.

  8. A mixed analog-digital radiation hard technology for high energy physics electronics DMILL (Durci Mixte sur Isolant Logico-Linéaire)

    CERN Document Server

    Beuville, E; Borgeaud, P; Fourches, N T; Rouger, M; Blanc, J P; Bruel, M; Delevoye-Orsier, E; Gautier, J; Du Port de Pontcharra, J; Truche, R; Dupont-Nivet, E; Flament, O; Leray, J L; Martin, J L; Montaron, J; Borel, G; Brice, J M; Chatagnon, P; Terrier, C; Aubert, Jean-Jacques; Delpierre, P A; Habrard, M C; Potheau, R; CERN. Geneva. Detector Research and Development Committee

    1992-01-01

    The high radiation level expected in the inner regions of the high luminosity LHC detectors (gamma and neutron) will require radiation hardened electronics. A consortium between the CEA (Commissariat a l'Energie Atomique) and Thomson TMS (Thomson Composants Militaires et Spatiaux) has been created to push for the development and the industrialization of a nascent technology which looks particularly adapted to the needs of HEP electronics. This technology, currently under development at the LETI(CEA), uses a SIMOX substrate with an epitaxial silicon film. It includes CMOS, JFETs and vertical bipolar transistors with a potential multi-megarad hardness. The CMOS and bipolar transistors constitute a rad-hard BiCMOS which will be useful to design analog and digital high-speed architectures. JFETs, which have intrinsically high hardness behaviour and low noise performances even at low temperature will enable very rad-hard, low noise front end electronics to be designed. Present results, together with the improvemen...

  9. Electron Gun Technology

    Science.gov (United States)

    1976-08-01

    charged to 2 kV was switched across the thin-wire discharge (all three wires together, in parallel) by meaus of a thyratron . In this case no...emission coefficient of 10 and the model presented in Se’ on II for the thin-wire discharge, this ratio would be «11. Because of the speculative...nature of botn the model and the assumed value for the secondary emission, such a difference in the two values is not sur- prising. The

  10. 78 FR 21116 - Superior Supplier Incentive Program

    Science.gov (United States)

    2013-04-09

    ... Department of the Navy Superior Supplier Incentive Program AGENCY: Department of the Navy, DoD. ACTION... policy that will establish a Superior Supplier Incentive Program (SSIP). Under the SSIP, contractors that..., performance, quality, and business relations would be granted Superior Supplier Status (SSS). Contractors...

  11. superior en México

    Directory of Open Access Journals (Sweden)

    César Mureddu Torres

    2008-01-01

    Full Text Available El presente artículo desarrolla algunos de los retos que ha traído consigo el acceso a la información existente en la red de Internet y lo que ello supone. Se abordan principalmente las consecuencias de la presencia actual de una sociedad llamada del conocimiento, si se mantiene la confusión entre conocimiento e información. Por ello, la sola gestión de la información no puede ser tomada como definitoria respecto a la función de educación superior confiada a las universidades. Hacerlo sería cometer un error aún más grave que la confusión teórica entre los términos mencionados.

  12. 电子级氢氟酸的纯化技术及其配套技术%Purification Technology for Electronic -Grade Hydrofluoric Acid and Its Associated Technology

    Institute of Scientific and Technical Information of China (English)

    洪海江; 应振洲; 余锋; 陈文亮; 赵景平

    2012-01-01

    With the shift of the semiconductor chip and Liquid Crystal Display (LCD) manufactuning to China, and the increasing demand for electronic - grade hydrofluoric acid in china, the fine fluorine chemical industry has become a trend for the the development of hydrofluoric Acid industry in China. The application area, quality criteria and purification technology for electronic -grade hydrofluoric acid are outlined, as well as associated tech- nology for production of electronic - grade hydrofluoric acid. It is suggested that while improving the production technology for electronic -grade hydrofluoric acid, the R&D for its associated technology should also be strengthened.%随着半导体芯片和液晶显示器(LCD)制造业向我国转移,以及国内电子级氢氟酸需求量的日益增长,精细氟化工已成为我国氟化工业发展的必然趋势。阐述了电子级氢氟酸的应用领域、质量标准、纯化技术,以及生产电子级氢氟酸的配套技术,认为我国在提高电子级氢氟酸生产工艺水平的同时,应加强其配套技术的研发。

  13. Ringing in the new physics: The politics and technology of electron colliders in the United States, 1956--1972

    Science.gov (United States)

    Paris, Elizabeth

    The ``November Revolution'' of 1974 and the experiments that followed consolidated the place of the Standard Model in modern particle physics. Much of the evidence on which these conclusions depended was generated by a new type of tool: colliding beam storage rings, which had been considered physically unfeasible twenty years earlier. In 1956 a young experimentalist named Gerry O'Neill dedicated himself to demonstrating that such an apparatus could do useful physics. The storage ring movement encountered numerous obstacles before generating one of the standard machines for high energy research. In fact, it wasn't until 1970 that the U.S. finally broke ground on its first electron-positron collider. Drawing extensively on archival sources and supplementing them with the personal accounts of many of the individuals who took part, Ringing in the New Physics examines this instance of post-World War II techno-science and the new social, political and scientific tensions that characterize it. The motivations are twofold: first, that the chronicle of storage rings may take its place beside mathematical group theory, computer simulations, magnetic spark chambers, and the like as an important contributor to a view of matter and energy which has been the dominant model for the last twenty-five years. In addition, the account provides a case study for the integration of the personal, professional, institutional, and material worlds when examining an episode in the history or sociology of twentieth century science. The story behind the technological development of storage rings holds fascinating insights into the relationship between theory and experiment, collaboration and competition in the physics community, the way scientists obtain funding and their responsibilities to it, and the very nature of what constitutes ``successful'' science in the post- World War II era.

  14. New technologies and nursing: use and perception of primary healthcare nurses about electronic health record in Catalonia, Spain.

    Science.gov (United States)

    Galimany-Masclans, Jordi; Garrido-Aguilar, Eva; Girbau-García, Ma Rosa; Lluch-Canut, Teresa; Fabrellas-Padrés, Nuria

    2011-10-01

    This study was aimed to analyze and assess the use and perception of electronic health records (EHRs) by nurses. The study sample included 113 nurses from different shifts of primary health facilities in Catalonia, Spain, devoted to adult as well as pediatric outpatients using EHRs throughout the year 2010. A majority of the sample (87.5%) were women and 12.5% were men. The average age was 44.27 years and the average time working in primary healthcare was 47.15 months. A majority (80.4%) received specific training on the use of the EHR and 19.6% did not. The use of the application required side technical support (mean: 3.42) and it is considered necessary to learn more about the performance of the application (mean: 3.50). The relationship between the average ratings that nurses have about the EHR and age shows that there is no statistically significant linear relationship (r=-0.002, p-value=0.984). As to how long they have used the EHRs, there are significant differences (r=-0.304, p-value=0.00), so the more time the nurse takes using the EHR, the greater degree of satisfaction is shown. In addition, there are significant differences between nurses' perceptions regarding the EHR and gender (t=-0.421, p-value=0.675). Nurses assessed as positive the contribution of the EHRs in their nursing care day work (average score: 2.55/5). Considering that the usability of the EHR device is assessed as satisfactory, the results of the perception of nurses show that we must also take into account the training and emphasize the need for a side technical support in the implementation process of the EHR. Doing so, the positive perception that nurses have in regard to information and communication technology in general and with respect to the EHR in particular may be increased.

  15. Documenting the emergence of electronic nicotine delivery systems as a disruptive technology in nicotine and tobacco science.

    Science.gov (United States)

    Correa, John B; Ariel, Idan; Menzie, Nicole S; Brandon, Thomas H

    2017-02-01

    The emergence of electronic nicotine delivery systems (ENDS, or "e-cigarettes") has resulted in nicotine and tobacco scientists committing increased resources to studying these products. Despite this surge of research on various topics related to e-cigarettes, it is important to characterize the evolving e-cigarette research landscape as a way to identify important future research directions. The purpose of this review was to broadly categorize published scholarly work on e-cigarettes using a structured, multi-level coding scheme. A systematic literature search was conducted to collect articles on e-cigarettes that were published in peer-reviewed journals from 2006 through 2014. Studies were classified through 3 coding waves. Articles were first divided into research reports, literature reviews and opinions/editorials. Research reports were further categorized to determine the proportion of these studies using human participants. Finally, human studies were classified based on their methodologies: descriptive, predictive, explanatory, and intervention. Research reports (n=224) and opinions/editorials (n=248) were published at similar rates during this time period. All types of articles showed exponential rates of increase in more recent years. 76.4% of human research studies were descriptive in nature, with very little research employing experimental (6.8%) or intervention-based methodologies (5.4%). This review reinforces the idea that e-cigarettes are a disruptive technology exerting substantial influence on nicotine and tobacco science. This review also suggests that opinions on e-cigarettes may be outpacing our scientific understanding of these devices. Our findings highlight the need for more e-cigarette research involving experimental, intervention, and longitudinal designs. Copyright © 2016 Elsevier Ltd. All rights reserved.

  16. A flexible sensor technology for the distributed measurement of interaction pressure

    NARCIS (Netherlands)

    Donati, M.; Vitiello, N.; De Rossi, S.M.M.; Lenzi, T.; Crea, S.; Persichetti, A.; Giovacchini, F.; Koopman, Bram; Podobnik, J.; Munih, M.; Carrozza, M.C.

    2013-01-01

    We present a sensor technology for the measure of the physical human-robot interaction pressure developed in the last years at Scuola Superiore Sant'Anna. The system is composed of flexible matrices of opto-electronic sensors covered by a soft silicone cover. This sensory system is completely

  17. 黑龙江省发展大麻的优势与主要栽培技术%The Superiority and Main Cultivation Technology of Hemp in Heilongjiang Province

    Institute of Scientific and Technical Information of China (English)

    宋宪友; 张利国; 房郁妍; 郑楠

    2011-01-01

    The status and the development advantages of hemp industry in Heilongjiang Province were described in this article: Heilongjiang Province is the first one to use flat sowing, close planting and mechanized processing. Warm water retting, dew retting technology and decorticating scutching machinery were adopted in the hemp production. The planting area of hemp in Heilongjiang Province was 9300 hm2 in 2007 and 4200 hm2 in 2009, accounting for 38.9% of the total in China. There are rich soil resources,suitable climate, a long history of planting hemp, the large-scale processing conditions and the mechanized conditions for cultivation and production. At the same time, the primary cultivation techniques were stated including seed treatment, right soil selection, ploughing in the summer and the fall, careful soil preparation,rational fertilization, timely planting, chemical weed control, irrigation, the control of diseases and pests,timely harvest, the proper storage and the mechanical threshing.%本文介绍了黑龙江省大麻产业的现状和发展优势:率先采用平播密植,机械加工.大麻生产主要采用温水沤麻和雨露工艺进行生物脱胶,利用亚麻剥麻机制麻.2007年我省大麻种植面积9300hm2,2009年仍有4200hm2,种植面积占全国大麻种植面积的38.9%.黑龙江种植大麻有丰富的土地资源、适宜的气候条件;有悠久的种麻历史、规模加工条件;有全程的机械化栽培生产条件.同时,结合黑龙江生产实际提出了大麻主要栽培技术:播前种子药剂处理,选择适宜的地块种植,伏、秋翻地,精细整地,合理施肥,适时播种,适时进行化学除草、灌溉、防病治虫,适期收获,妥善保管,机械脱粒.

  18. Superior Gas Sensing Properties of Monolayer PtSe2

    KAUST Repository

    Sajjad, Muhammad

    2016-12-15

    First-principles calculations of the structural and electronic properties of monolayer 1T-PtSe2 with adsorbed (a) NO2, (b) NO, (c) NH3, (d) H2O, (e) CO2, and (f) CO molecules are discussed. The results point to great potential of the material in gas sensor applications. Superior sensitivity is demonstrated by transport calculations using the nonequilibrium Green\\'s function method.

  19. Explore the Modern Technology of Electronic Information Engineering%电子信息工程的现代化技术探究

    Institute of Scientific and Technical Information of China (English)

    陈武

    2015-01-01

    电子信息工程现代化技术的发展推动了整个信息化革命的进程,并已越来越深入到社会生活的各个方面,直接影响着整个社会的发展进程。%The development of electronic information engineering technology to promote the process of modernization of the entire information technology revolution, and has been more and more deeply into the various aspects of social life, a direct impact on the development process of the whole society.

  20. CURRENT COLLOIDAL DISPERSION GELS ARE NOT SUPERIOR TO POLYMER FLOODING

    Institute of Scientific and Technical Information of China (English)

    Seright Randy; Han Peihui; Wang Dongmei

    2006-01-01

    The suggestion that the colloidal-dispersion-gel (CDG) process is superior to normal polymer flooding is misleading and generally incorrect. Colloidal dispersion gels, in their present state of technological development, should not be advocated as an improvement to, or substitute for, polymer flooding. Gels made from aluminum-citrate crosslinked polyacrylamides can act as conventional gels and provide effective conformance improvement in treating some types of excess water production problems if sound scientific and engineering principles are respected.

  1. Sobredentadura total superior implantosoportada Superior total overdenture on implants

    Directory of Open Access Journals (Sweden)

    Luis Orlando Rodríguez García

    2010-06-01

    Full Text Available Se presenta un caso de un paciente desdentado total superior, rehabilitado en la consulta de implantología de la Clínica "Pedro Ortiz" del municipio Habana del Este en Ciudad de La Habana, Cuba, en el año 2009, mediante prótesis sobre implantes osteointegrados, técnica que se ha incorporado a la práctica estomatológica en Cuba como alternativa al tratamiento convencional en los pacientes desdentados totales. Se siguió un protocolo que comprendió una fase quirúrgica, procedimiento con o sin realización de colgajo y carga precoz o inmediata. Se presenta un paciente masculino de 56 años de edad, que acudió a la consulta multidisciplinaria, preocupado, porque se le habían elaborado tres prótesis en los últimos dos años y ninguna reunía los requisitos de retención que él necesitaba para sentirse seguro y cómodo con las mismas. El resultado final fue la satisfacción total del paciente, con el mejoramiento de la calidad estética y funcional.This is the case of a total maxilla edentulous patient seen in consultation of the "Pedro Ortíz" Clinic Implant of Habana del Este municipality in 2009 and con rehabilitation by prosthesis over osteointegration implants added to stomatology practice in Cuba as an alternative to conventional treatment in patients totally edentulous. We follow a protocol including a surgery or surgical phase, technique without or with flap creation and early or immediate load. This is a male patient aged 56 came to our multidisciplinary consultation worried because he had three prostheses in last two years and any fulfilled the requirements of retention to feel safe and comfortable with prostheses. The final result was the total satisfaction of rehabilitated patient improving its aesthetic and functional quality.

  2. Teaching method reform of electronic machine and PLC control technology%机床电器与PLC控制技术课程教学方法探索

    Institute of Scientific and Technical Information of China (English)

    李晨光; 于尧; 李娜

    2011-01-01

    机床电器与PLC控制技术是机电院学生的一门必修重点课程,为了能够让学生更好的掌握这门课程的知识,针对其教学中存在的问题,从教学手段、教学方法,实验课教学等方面进行了改进,并取得了良好效果。%Electronic Machine And PLC Control Technology is an important required course for the students of Mechanical and Electrical Engineering.In order to help them command the knowledge of this course and for existing problems in the teaching of Electronic Machine And PLC Control Technology,efforts were made for improvement and good results achieved in teaching means,teaching methods,experiments and other aspects of teaching.

  3. Readout electronics for low dark count Geiger mode avalanche photodiodes fabricated in conventional HV-CMOS technologies for future linear colliders

    Energy Technology Data Exchange (ETDEWEB)

    Vilella, E; Arbat, A; Alonso, O; Vila, A; Dieguez, A [Department of Electronics, University of Barcelona (UB) MartI i Franques 1, 08028 Barcelona (Spain); Comerma, A; Trenado, J; Gascon, D; Garrido, L, E-mail: evilella@el.ub.es [Department of Structure and Constituents of Matter, University of Barcelona (UB) MartI i Franques 1, 08028 Barcelona (Spain)

    2011-01-15

    This work presents low noise readout circuits for silicon pixel detectors based on Geiger mode avalanche photodiodes. Geiger mode avalanche photodiodes offer a high intrinsic gain as well as an excellent timing accuracy. In addition, they can be compatible with standard CMOS technologies. However, they suffer from a high intrinsic noise, which induces false counts indistinguishable from real events and represents an increase of the readout electronics area to store the false counts. We have developed new front-end electronic circuitry for Geiger mode avalanche photodiodes in a conventional 0.35 {mu}m HV-CMOS technology based on a gated mode of operation that allows low noise operation. The performance of the pixel detector is triggered and synchronized with the particle beam thanks to the gated acquisition. The circuits allow low reverse bias overvoltage operation which also improves the noise figures. Experimental characterization of the fabricated front-end circuit is presented in this work.

  4. Reconfiguration of the Study System of Digital Electronic Technology Courses%重构高职数字电子技术课程体系的研究

    Institute of Scientific and Technical Information of China (English)

    孙津平

    2011-01-01

    针对职业教育技能应用型人才的培养目标,基于理实一体化的教学方式,本文打破原有数字电子技术课程体系,按项目为载体、任务驱动的理念,进行数字电子技术课程知识的解构及重构,研发出数字电子技术课程教、学、做的新体系.按基本、应用、综合三大能力,设置了八个项目、26个任务.使数字电子技术课程的理论知识和实践技能得到有机的融合.实践表明,按项目引导来实施任务教学,更有利于学习者掌握数字电子技术的基本理论知识及技术应用,提升分析、解决问题的实践技能.%For the training objective of applied talent of vocational education skills, based on the teaching methods which integrate the theory and practice, this paper broke the existing digital electronic technology curriculum, reconstructed the digital electronic technology courses knowledge according to the idea of taking the project as the carrier and task derivation, and developed the new system of digital electronic technology courses with teaching, learning, doing, which set up eight projects and twenty six tasks according to three abilities of basis, application and integration. The new system made the digital electronic technology courses get an organic integration of theoretical and practical skills. Practice shows that the task teaching guided by the project can help the learners grasp the fundamental theoretical knowledge and technology of digital electronic technology and enhance the skills of analyzing, solving problem and practice.

  5. High-Performance electronics at ultra-low power consumption for space applications: From superconductor to nanoscale semiconductor technology

    Science.gov (United States)

    Duncan, Robert V.; Simmons, Jerry; Kupferman, Stuart; McWhorter, Paul; Dunlap, David; Kovanis, V.

    1995-01-01

    A detailed review of Sandia's work in ultralow power dissipation electronics for space flight applications, including superconductive electronics, new advances in quantum well structures, and ultra-high purity 3-5 materials, and recent advances in micro-electro-optical-mechanical systems (MEMS) is presented. The superconductive electronics and micromechanical devices are well suited for application in micro-robotics, micro-rocket engines, and advanced sensors.

  6. Technology of Key Escrow in Electronic Commerce%电子商务中的密钥托管技术

    Institute of Scientific and Technical Information of China (English)

    潘耘; 冷英男; 王自军; 任晓蕾

    2001-01-01

    With the rapid development of Internet electr onic commerce has been n oticed increasingly. However, the problem of its security makes people not dare into this advanced field. The subjects involving in electronic commerce activiti es need to prevent the other subjects from denying their activities. Some securi ty organizations of government also need to get the encrypted key through legal means in order to track, intercept and capture criminal information. Thus the en crypted key escrow technology must be adopted and it must be of security. For th e sake of security the key will be divided into several blocks which are stored in different reliable agents. The key can not be restored unless all agents w ork together. For designing an effective and safe key escrow, the discrete logar ithm is applied for solving key escrow .The security of this algorithm completel y depends on the difficulty to solve discrete logarithm ,therefore, this algorit hm is secure and simple when a big prime number is adopted.Moreover, adding thi s technology in SET will benefit the legal agency to monitor illegal activitie s.%电子商务随着Internet的迅速发展,日益受到人们的关注。但其安全问题经常令人不敢涉足其中。一方面参加商务活动的主体需防止另一方抵赖活动,另一方面政府安全机构为跟踪截获犯罪嫌疑人员的通信,都需要通过合法渠道获得电子商务中商务活动的主体进行数据通讯时的加密密钥。此时需采用密钥托管技术,而且密钥托管必须是安全的。为了安全起见,密钥被分成几块,分别存在几位可信赖的委托人处进行托管,任何一位委托人都不能单独恢复密钥。只有几位委托人在一起才能回复密钥。为了有效安全的进行密钥托管,采用了离散对数解决密钥托管。鉴于本算法的安全性依赖与求离散对数的困难性,所以当选用很大的安全素数时,此算法既简单又安全。

  7. 基于电控技术的现代汽车维修%Modern Vehicle Maintenance Based on Electronic Control Technology

    Institute of Scientific and Technical Information of China (English)

    杨凤山

    2015-01-01

    Auto electronic control technology development and application for vehicle maintenance and repair work is both challenge and opportunity,vehicle maintenance and repair work in the specific operation practice also need to be closely integrated with electronic control technology.Therefore,modern vehicle maintenance based on electronic control technology demands the maintenance staff to grasp relevant knowledge and skills.Meanwhile,maintenance enterprises should draw into new type of diagnose equipment.%汽车电控技术的发展,给汽车维修带来了复杂性和难度,传统的维修手段和理念已不再适用.因此,基于电控技术的现代汽车维修,需要维修人员掌握相关知识和技能,同时维修企业还须引进添置四轮定位设备、解码器等新型诊断设备.

  8. The Potential That Electronic Nicotine Delivery Systems Can be a Disruptive Technology: Results From a National Survey.

    Science.gov (United States)

    Pechacek, Terry F; Nayak, Pratibha; Gregory, Kyle R; Weaver, Scott R; Eriksen, Michael P

    2016-10-01

    This study evaluates the reasons for use and acceptance of Electronic Nicotine Delivery Systems (ENDS) among current and former cigarette smokers to assess if ENDS may become a satisfying alternative to cigarettes. Data are from a national probability sample of 5717 US adults, surveyed June-November 2014. The survey contained questions on awareness, usage, and reasons for use of traditional and novel tobacco products. The analytic sample was current and former smokers who ever used ENDS (n = 729) and was divided into four mutually exclusive categories. Among the 585 current smokers, 337 were no longer using ENDS ("E-Cig Rejecters"), and 248 were continuing to use both ENDS and cigarettes ("E-Cig Dual Users"). Among 144 former cigarette smokers, 101 were non-recent users of ENDS ("Quit All Products"), and 43 were continuing to use ENDS exclusively ("Switchers"). Former smokers (the "Switchers") report finding ENDS a satisfying alternative to regular cigarettes, with only 15.8% (95% confidence interval [CI] 4.4-27.1) rating ENDS as less enjoyable than regular cigarettes. However, greater than fivefold more current smokers did not find them satisfying and stopped using them (77.3%; 95% CI 72.1-82.4 of "E-Cig Rejecters" rated ENDS as less enjoyable). Being less harmful was the most highly rated reason for continuing to use ENDS among "Switchers." Most (80.9%) "Switchers" reported that ENDS helped them quit cigarettes. Since many current smokers who have tried ENDS reject them as a satisfying alternative to regular cigarettes, ENDS will not replace regular cigarettes unless they improve. Since about one-half of recent former smokers are trying ENDS with about one-fourth continuing to use them, and many reporting that these products have helped them quit regular cigarettes, the potential impact of ENDS on population quit rates deserves continued surveillance. However, since most current smokers who have tried ENDS reject them as a satisfying alternative to regular

  9. Proposal for an ad hoc computer network in the military electronic systems department at the military academy applying bluetooth technology

    National Research Council Canada - National Science Library

    Miroslav R. Terzić

    2011-01-01

    .... The concept of a local area network for this Department, using Bluetooth technology, includes network topology and working regimes based on the main characteristics and technical specifications...

  10. Electronic Elections

    DEFF Research Database (Denmark)

    Schürmann, Carsten

    2009-01-01

    Electronic voting technology is a two edged sword. It comes with many risks but brings also many benefits. Instead of flat out rejecting the technology as uncontrollably dangerous, we advocate in this paper a different technological angle that renders electronic elections trustworthy beyond...... the usual levels of doubt. We exploit the trust that voters currently have into the democratic process and model our techniques around that observation accordingly. In particular, we propose a technique of trace emitting computations to record the individual steps of an electronic voting machine...... for a posteriori validation on an acceptably small trusted computing base. Our technology enables us to prove that an electronic elections preserves the voter’s intent, assuming that the voting machine and the trace verifier are independent....

  11. Smart Grids influence in the competitiveness of the EITT sector (Electronics, Information Technologies and Telecommunications); Incidencia de las Smart Grids en la competitividad del sector ETIC

    Energy Technology Data Exchange (ETDEWEB)

    Ibanes del Agua, E.

    2012-07-01

    The aim of this article is to provide a general vision about the how the smart grids development could have an influence in the competitiveness and opportunities for the industry of electronics, information technologies and telecommunications. General concepts about smart grids are summarized, as well as the changes that are foreseen in the electrical network and the most important technologies that will support the development of the smart grids. A smart grid is a transport and distribution network that has the capacity to understanding, assimilate, elaborate and use it adequately, with an intensive use of the information technologies and the telecommunications. The article is completed by projects, initiatives and activities related to the smart grids and by different conclusions. (Author)

  12. Delivery of Dietary and Lifestyle Interventions in Pregnancy: is it Time to Promote the Use of Electronic and Mobile Health Technologies?

    Science.gov (United States)

    O'Brien, Cecelia M; Cramp, Courtney; Dodd, Jodie M

    2016-03-01

    Fifty percent of women who enter pregnancy are overweight or obese, increasing complications for both the mother and the infant, along with significant burden on individuals and the health care system. Pregnancy represents a "teachable moment" in a woman's life, however, antenatal interventions focusing on improving dietary and physical activity patterns have been associated with modest behavior change. There are many barriers that need to be overcome, including lack of knowledge, access and time pressures. Advancing mobile and electronic health technologies may represent an adjunct tool to support traditional face-to-face consultations and facilitate behavior change, but further rigorous evaluation of the technologies and their impact on health outcomes is required. Well-designed antenatal intervention trials with particular attention to the structure and method of information provision are required to further assess the feasibility of such technology.

  13. Application of 3D Printing Technology in Electronic Equipment Industry%3D打印技术在电子设备行业的应用

    Institute of Scientific and Technical Information of China (English)

    朱安超

    2015-01-01

    3D打印是最近几年开始流行的,以成形速度快为特点的打印新技术,最基本的组成元件,就是数字模型,能够按照实物本身的特点和结构,进行分层次的打印,最终形成实际产品,这项技术涉及信息技术、材料科学、精密机械等多个学科领域。在电子设备行业中,3D打印技术也得到了广泛的应用,文章将对3D打印技术进行简单介绍,并对3D技术在电子设备行业中所发挥的作用和应用进行简单探讨。%3D printing is the most popular in recent years, with the characteristics of forming speed printing new technology, the most basic components, is the digital model, can be in accordance with the characteristics and structure of the material itself, the level of printing, eventually forming the actual product, the technology involved in information technology, materials science, precision machinery and other ifelds. In the electronic equipment industry, 3D printing technology has been widely used, the article will be a brief introduction to 3D printing technology, and the role and application of 3D technology in the electronic equipment industry is simply discussed.

  14. Fiscal 1996 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1996 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level which is a basic technology in the electronic information field, a key to the realization of the high grade information society and a common technology base giving marked influences to the wide range industrial field, the R and D was started of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology to draw pictures on metal and crystal surfaces using ultra short wavelength laser beams, shading system technology of shading mask to be used to the process of drawing ultra high accuracy and complicated figures, ultra high tech plasma reactive measuring/analysis/control technologies which become the base of ultra thin films and ultra fine etching using plasma, ultra high tech cleaning base technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. 137 refs., 358 figs., 38 tabs.

  15. Paso superior en una ladera

    Directory of Open Access Journals (Sweden)

    Bender, O.

    1965-07-01

    Full Text Available The Redwood highway, through the Californian forest, runs on a viaduct, as it crosses a mountain slope of about 45° inclination. The firm ground is fairly deep, and as an additional constructional difficulty, it was necessary to respect the natural beauty of the countryside. A structure of portal frames were built, forming a number of short spans. These spans were bridged with metal girders, on which a 19 m wide deck was placed. The columns are hollow and have a transversal cross beam, to join each pair. There was difficulty in excavating the foundations for the columns, as it was necessary to dig through the soft top soil, and also prevent this soil from hurting the trunks of the forest trees. Another significant difficulty in the construction of this viaduct was the access to the working site, since there were no suitable platforms from which to operate the appropriate machinery. This made it necessary to do a lot of the work by manual operation. As one of the edges of the deck is very close to the mountain side, a supporting beam was erected on this side. It was made of concrete, on metal piles. The formwork for the deck structure was placed on the concrete stems of the supporting piles.La autopista denominada Redwood (California salva, con un paso superior, la ladera de un bosque cuya pendiente es del 1/1. El terreno firme se halla a bastante profundidad, añadiéndose, a los naturales problemas de la construcción, el imperativo de respetar la belleza agreste del paraje. La solución adoptada consiste en una estructura porticada, con varios tramos de pequeñas luces, salvados con vigas metálicas, sobre los que se coloca la losa del tablero, de 19 m de anchura total. Los soportes están constituidos por pórticos de dos montantes huecos (con bases de hormigón en masa por debajo del suelo, hasta el firme coronados por un cabezal. La perforación de pozos para el hormigonado de los montantes presentaba la dificultad de atravesar el terreno

  16. Research on electronic commerce CRM based on data mining technology%基于数据挖掘技术的电子商务CRM研究

    Institute of Scientific and Technical Information of China (English)

    李静

    2015-01-01

    网络时代,电子商务CRM中存储海量客户数据,可利用数据挖掘技术对这些数据进行有效挖掘,发现有价值的信息。通过了解客户关系管理CRM的功能,分析数据挖掘技术的模式及过程,得出在电子商务CRM中可利用数据挖掘技术的分类模式获取新客户,聚类模式留住老客户,关联、序列模式提升客户价值,数据挖掘技术将在CRM中发挥越来越重要的作用。%In the network era,since the massive customer data is stored in electronic commerce customer relationship manage⁃ment(CRM),the valuable information can be found by means of data mining technology and effective mining. By understanding the function of CRM,analyzing the modes and process of data mining technology,it is obtained that in electronic commerce CRM,the classification mode of data mining technology is adopted to acquire new customers,the clustering mode is used to re⁃tain old customers,the correlation mode and sequential mode are used to improve customer value. Data mining technology will play more important role in electronic commerce CRM.

  17. 电子产品公共技术服务平台的开发%The Development of Electronic Products Public Technology Service Platform

    Institute of Scientific and Technical Information of China (English)

    万明刚; 勾博

    2011-01-01

    This platform is the use of computer technology, exchange of data storage technology, data retrieval,control network technology and the Intemet technology to build the"public technical service platform for electronic products in Jilin Province".The platform is able to ensure that collected information about electronic information enterprises in the province,included in the platform database and offers standard query to enterprise platform,companies demand support platform,expert support platform,resource libraries,enterprise marketing services platform and comprehensive information service platform.Achieve the integration of electronic information enterprises in Jilin province internal and external resources,achieve the goal of resource information sharing.%本平台是利用计算机技术、数据存储技术、数据交换检索技术、控制网络技术和互联网技术构建的省内“电子产品公共技术服务平台”。该平台能够保证收集省内电子信息企业的相关信息,纳入该平台数据库,并向各企业提供标准查询平台、企业需求支撑平台、专家支撑平台、资源库、企业市场服务平台以及综合信息服务平台。达到省内内电子信息企业整合内外部资源,实现资源信息共享的目标。

  18. Pseudodisplacements of superior vena cava catheter in the persistent left superior vena cava

    Energy Technology Data Exchange (ETDEWEB)

    Jantsch, H.; Draxler, V.; Muhar, U.; Schlemmer, M.; Waneck, R.

    1983-01-01

    Pseudodisplacement of a left sided superior vena cava catheter in a persistent superior vena cava may be expected in adults in 0,37% and in a group of children with congenital heart disease in 2,5%. Embryology, anatomy and clinical implications is discussed on the basis of our own cases. The vena cava superior sinistra persitents is depending on a sufficient calibre a suitable vessel for a superior cava catheter.

  19. Device Design and Modeling for Beyond-CMOS Information Technology Based on Integrated Electronic-Magnetic Systems

    Science.gov (United States)

    Duan, Xiaopeng

    This thesis focuses on exploiting the correlation between insulating ferromagnets and 2- dimensional Dirac electronic systems in graphene and topological insulators (TI) to develop beyond-CMOS devices for information processing. (Abstract shortened by ProQuest.).

  20. 网络电子证据取证技术与反取证技术研究%Research on Forensic Technology and Anti-Forensic Technology of Network Electronic Evidence

    Institute of Scientific and Technical Information of China (English)

    杜威; 彭建新; 杨奕琦

    2011-01-01

    随着网络技术的发展,计算机网络犯罪现象日趋严重。为了有效地打击网络犯罪行为,完善网络电子证据立法基础,取证技术专家不仅要研究网络取证相关技术,同时还必须对网络反取证技术充分进行研究。通过研究反取证技术来促进取证技术的提高,这样才能在网络取证过程中拓宽思路,提高获取有效证据的效率。%With the development of network technology,the crimes involved in computer network become increasingly serious.In order to fight against network crime and to strengthen the legislative basis for the electronic evidence,forensic experts shall study the network forensic technology and the network anti-forensic technology.The study of the anti-forensic technology can promote the improvement of the forensic technology,so it can broaden our thinking and improve the efficiency in the network forensics.

  1. Batching System for Superior Service

    Science.gov (United States)

    2001-01-01

    Veridian's Portable Batch System (PBS) was the recipient of the 1997 NASA Space Act Award for outstanding software. A batch system is a set of processes for managing queues and jobs. Without a batch system, it is difficult to manage the workload of a computer system. By bundling the enterprise's computing resources, the PBS technology offers users a single coherent interface, resulting in efficient management of the batch services. Users choose which information to package into "containers" for system-wide use. PBS also provides detailed system usage data, a procedure not easily executed without this software. PBS operates on networked, multi-platform UNIX environments. Veridian's new version, PBS Pro,TM has additional features and enhancements, including support for additional operating systems. Veridian distributes the original version of PBS as Open Source software via the PBS website. Customers can register and download the software at no cost. PBS Pro is also available via the web and offers additional features such as increased stability, reliability, and fault tolerance.A company using PBS can expect a significant increase in the effective management of its computing resources. Tangible benefits include increased utilization of costly resources and enhanced understanding of computational requirements and user needs.

  2. Technology for Obtaining Large Size Complex Oxide Crystals for Experiments on Muon-Electron Conversion Registration in High Energy Physics

    Directory of Open Access Journals (Sweden)

    Gerasymov, Ya.

    2014-11-01

    Full Text Available Technological approaches for qualitative large size scintillation crystals growing based on rare-earth silicates are proposed. A method of iridium crucibles charging using eutectic phase instead of a oxyorthosilicate was developed.

  3. A strategic analysis of a Credit Union's technology outsourcing

    OpenAIRE

    Janzen, David

    2006-01-01

    Envision Credit Union, the third largest credit union in British Columbia, operates in a highly competitive banking industry and attempts to differentiate itself through superior face-to-face customer service and employee satisfaction. Many low-cost competitors leverage technology to electronically simulate face-to-face service to become a virtual differentiator. To compete with low-cost rivals, Envision developed the Pathways partnership with First Calgary Savings Credit Union. This allows E...

  4. The Electronic Payment Technology Utilize & Study In The Electronic Commerce%电子支付技术在电子商务中的运用与研究

    Institute of Scientific and Technical Information of China (English)

    张明达

    2000-01-01

    影响我国现代电子商务发展瓶颈问题是网上购物的结算,结合现今国际电子商务行为的方式方法,如何利用相关电子支付技术,实现网上购物与实时支付等问题,是实现网上购物与实时支付的关键所在。%Concentrating on the problem that afects the country's developing in modem electronic commerce. Combining with the present international method of electronic commerce, we have done some researches on how to use relevant technology on the delectronic payment and realize the problem of buying on INTERNET and paying in real time. This article points out the key on how to turn buying on INTERNET and paying real time into reality.

  5. The application of network communication technology in automotive electronics%汽车电子网络通信技术的应用

    Institute of Scientific and Technical Information of China (English)

    陈益庆

    2015-01-01

    With the development of modern science and technology progress, the car has to the Internet, wireless connection, personal communications electronics, entertainment equipment integration, constantly satisfy the people to the automobile performance, safety, comfort, fuel economy requirements. The use of a large number of equipment, the control of complex wiring, convenient and simple, safe and reliable control demand is driving change and development of automobile electronic network technology, entering the era of electronic networks.%随着现代科技的发展进步,汽车已将网际网路、无线连接、个人通信电子装置、娱乐设备等整合于一身,不断满足着人们对汽车动力性、安全性、舒适性、经济性的要求。大量设备的使用、繁琐的控制布线,方便简洁、安全可靠的控制需求促使汽车电子网络技术的变革与发展,迈入电子网络时代。

  6. Polymer electronics

    CERN Document Server

    Geoghegan, Mark

    2013-01-01

    Polymer electronics is the science behind many important new developments in technology, such as the flexible electronic display (e-ink) and many new developments in transistor technology. Solar cells, light-emitting diodes, and transistors are all areas where plastic electronics is likely to, or is already having, a serious impact on our daily lives. With polymer transistors and light-emitting diodes now being commercialised, there is a clear need for a pedagogic text thatdiscusses the subject in a clear and concise fashion suitable for senior undergraduate and graduate students. The content

  7. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  8. Technology Tiers

    DEFF Research Database (Denmark)

    Karlsson, Christer

    2015-01-01

    A technology tier is a level in a product system: final product, system, subsystem, component, or part. As a concept, it contrasts traditional “vertical” special technologies (for example, mechanics and electronics) and focuses “horizontal” feature technologies such as product characteristics...

  9. Superiority in value and the repugnant conclusion

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint

    2007-01-01

    James Griffin has considered a weak form of superiority in value a possible remedy to the Repugnant Conclusion. In this paper, I demonstrate that, in a context where value is additive, this weaker form collapses into a stronger form of superiority. And in a context where value is non-additive, weak...... superiority does not amount to a radical value difference at all. I then spell out the consequences of these results for different interpretations of Griffin's suggestion regarding population ethics. None of them comes out very successful, but perhaps they nevertheless retain some interest....

  10. INFORMATION TECHNOLOGY "KEY TO TEXT" FOR SEMANTIC SEARCH AND INDEXING OF TEXTUAL INFORMATION - AN ESSENTIAL TOOL FOR ELECTRONIC PUBLISHING

    OpenAIRE

    M. Kreines

    2000-01-01

    The electronic editions gives essentially new features to structure and organization for searching information by the reader and the information services providers. Before the computer revolution any edition on a library shelf or under a veil of a dust on a desk, before the reader took it in his hands, meant no more than was written in its catalogue card. (Certainly, we here do not speak about the editions surrounded with light of legends). Only the electronic edition is capable to speak at t...

  11. Millian superiorities and the repugnant conclusion

    DEFF Research Database (Denmark)

    Jensen, Karsten Klint

    2008-01-01

    James Griffin has considered a form of superiority in value that is weaker than lexical priority as a possible remedy to the Repugnant Conclusion. In this article, I demonstrate that, in a context where value is additive, this weaker form collapses into the stronger form of superiority. And in a ......James Griffin has considered a form of superiority in value that is weaker than lexical priority as a possible remedy to the Repugnant Conclusion. In this article, I demonstrate that, in a context where value is additive, this weaker form collapses into the stronger form of superiority...... of these results for different interpretations of Griffin's suggestion regarding population ethics. None of them comes out very successful, but perhaps they nevertheless retain some interest....

  12. Measuring Financial Gains from Genetically Superior Trees

    Science.gov (United States)

    George Dutrow; Clark Row

    1976-01-01

    Planting genetically superior loblolly pines will probably yield high profits.Forest economists have made computer simulations that predict financial gains expected from a tree improvement program under actual field conditions.

  13. Superior mesenteric artery syndrome causing growth retardation

    Directory of Open Access Journals (Sweden)

    Halil İbrahim Taşcı

    2013-03-01

    Full Text Available Superior mesenteric artery syndrome is a rare and lifethreateningclinical condition caused by the compressionof the third portion of the duodenum between the aortaand the superior mesenteric artery’s proximal part. Thiscompression may lead to chronic intermittent, acute totalor partial obstruction. Sudden weight-loss and the relateddecrease in the fat tissue are considered to be the etiologicalreason of acute stenosis. Weight-loss accompaniedby nausea, vomiting, anorexia, epigastric pain, andbloating are the leading complaints. Barium radiographs,computerized tomography, conventional angiography,tomographic and magnetic resonance angiography areused in the diagnosis. There are medical and surgical approachesto treatment. We hereby present the case ofa patient with superior mesenteric artery syndrome withdelayed diagnosis.Key words: superior mesenteric artery syndrome, nausea-vomiting, anorexia

  14. Study of device mass production capability of the character projection based electron beam direct writing process technology toward 14 nm node and beyond

    Science.gov (United States)

    Kojima, Yoshinori; Takahashi, Yasushi; Takakuwa, Masaki; Ohshio, Shuzo; Sugatani, Shinji; Tujimura, Ryo; Takita, Hiroshi; Ogino, Kozo; Hoshino, Hiromi; Ito, Yoshio; Miyajima, Masaaki; Kon, Jun-ichi

    2012-03-01

    Techniques to appropriately control the key factors for a character projection (CP) based electron beam direct writing (EBDW) technology for mass production are shown and discussed. In order to achieve accurate CD control, the CP technique using the master CP is adopted. Another CP technique, the Packed CP, is used to obtain suitable shot count. For the alignment on the some critical layers which have the normally an even surface, the alignment methodology differ from photolithography is required. The process that etches the SiO2 material in the shallow trench isolation is added and then the alignment marks can be detected using electron beam even at the gate layer, which is normally on an even surface. The proximity effect correction using the simplified electron energy flux model and the hybrid exposure are used to obtain enough process margins. As a result, the sufficient CD accuracy, overlay accuracy, and yield are obtained on the 65 nm node device. The condition in our system is checked using self-diagnosis on a regular basis, and scheduled maintenances have been properly performed. Due to the proper system control, more than 10,000 production wafers have been successfully exposed so far without any major system downtime. It is shown that those techniques can be adapted to the 32 nm node production with slight modifications. For the 14 nm node and beyond, however, the drastic increment of the shot count becomes more of a concern. The Multi column cell (MCC) exposure method, the key concept of which is the parallelization of the electron beam columns with a CP, can overcome this concern. It is expected that by using the MCC exposure system, those techniques will be applicable to the rapid establishment for the 14 nm node technology.

  15. Multisim 11在模拟电子技术实验中的应用%Application of Multisim11 in Experimental Teaching of Analog Electronic Technology

    Institute of Scientific and Technical Information of China (English)

    刘君; 杨晓苹; 吕联荣; 刘津丽; 郭晓倩

    2013-01-01

    It is of great importance to use Multisimll to aid experimental teaching in analog electronic technology. Using Multisimll in experimental teaching of analog electronic technology can solve the problems in the traditional experimental teaching and can help students understand the working principle of analog circuits, laying a good foundation for the design of electronic circuits. In the National Undergraduate Electronic Design Contest, Multisimll was used to help students complete the design of the filter. The simulation results were accurate and the designs met the requirements, which proved that Multisimll is an effective tool to cultivate the problem-analyzing, problem solving and operation abilities of students.%在模拟电子技术实验课程教学中,应用Multisim11进行辅助实验教学具有重要意义.通过实例分析和讨论,将Multisim11引入模拟电子技术实验教学中,可很好地解决传统实验受时间、地点、设备制约的现状,能帮助学生更好地理解模拟电路工作原理,为电子电路的设计制作打下良好基础.以全国大学生电子竞赛为例,采用Multisim11软件设计滤波器,设计方便可靠,仿真分析准确,可很快达到设计要求,从而得知Multisim11软件是培养学生分析问题、解决问题和实际动手能力培养的有效工具.

  16. Leiomyosarcoma of the superior vena cava.

    Science.gov (United States)

    de Chaumont, Arthus; Pierret, Charles; de Kerangal, Xavier; Le Moulec, Sylvestre; Laborde, François

    2014-08-01

    Leiomyosarcoma of the superior vena cava is a very rare tumor and only a few cases have been reported, with various techniques of vascular reconstruction. We describe a new case of leiomyosarcoma of the superior vena cava in a 61-year-old woman with extension to the brachiocephalic arterial trunk. Resection and vascular reconstruction were performed using, respectively, polytetrafluoroethylene and polyethylene terephtalate vascular grafts.

  17. Superior mesenteric artery compression syndrome - case report

    OpenAIRE

    Paulo Rocha França Neto; Rodrigo de Almeida Paiva; Antônio Lacerda Filho; Fábio Lopes de Queiroz; Teon Noronha

    2011-01-01

    Superior mesenteric artery syndrome is an entity generally caused by the loss of the intervening mesenteric fat pad, resulting in compression of the third portion of the duodenum by the superior mesenteric artery. This article reports the case of a patient with irremovable metastatic adenocarcinoma in the sigmoid colon, that evolved with intense vomiting. Intestinal transit was carried out, which showed important gastric dilation extended until the third portion of the duodenum, compatible wi...

  18. Superior biofunctionality of dental implant fixtures uniformly coated with durable bioglass films by magnetron sputtering.

    Science.gov (United States)

    Popa, A C; Stan, G E; Enculescu, M; Tanase, C; Tulyaganov, D U; Ferreira, J M F

    2015-11-01

    Bioactive glasses are currently considered the suitable candidates to stir the quest for a new generation of osseous implants with superior biological/functional performance. In congruence with this vision, this contribution aims to introduce a reliable technological recipe for coating fairly complex 3D-shaped implants (e.g. dental screws) with uniform and mechanical resistant bioactive glass films by the radio-frequency magnetron sputtering method. The mechanical reliability of the bioactive glass films applied to real Ti dental implant fixtures has been evaluated by a procedure comprised of "cold" implantation in pig mandibular bone from a dead animal, followed by immediate tension-free extraction tests. The effects of the complex mechanical strains occurring during implantation were analysed by scanning electron microscopy coupled with electron dispersive spectroscopy. Extensive biocompatibility assays (MTS, immunofluorescence, Western blot) revealed that the bioactive glass films stimulated strong cellular adhesion and proliferation of human dental pulp stem cells, without promoting their differentiation. The ability of the implant coatings to conserve a healthy stem cell pool is promising to further endorse the fabrication of new osseointegration implant designs with extended lifetime.

  19. A Study To Determine the Effect of College-Level Mathematics Skills on Electronic Technology Final Grades.

    Science.gov (United States)

    Satterlee, Brian

    A study determined the effect of college-level trigonometry skills on the final grades of students enrolled in Introduction to AC/DC Circuits, the first course in the vocational electronics program at Seminole Community College (Florida). The literature was reviewed to develop a conceptual framework for the project. A pretest that measured…

  20. Electronic Tongue for Qualitative Analysis of Aqueous Solutions of Salts Using Thick-film Technology and Metal Electrodes

    Directory of Open Access Journals (Sweden)

    Juan Soto

    2006-09-01

    Full Text Available An electronic tongue for the qualitative analysis of aqueous solutions of salts hasbeen developed. The following set of electrodes was used: RuO2, Ag, and Cu in thick-filmtechnology and Au, Pb, Zn and Ni as small bars of the corresponding metal. The response ofthe designed “electronic tongue” was tested on a family of samples containing pure salt andcomplex mixtures. The electrodes were used as potentiometric un-specific sensors and thee.m.f. of each electrode in contact with a certain aqueous solution was used as input signalfor a PCA analysis. The study showed that the set of electrodes were capable to discriminatebetween aqueous solutions of salts basically by their different content in anions and cations(the anions SO42-, Cl-, PO4H2-, CO3H-, NO3- and cations Na+ and K+ were studied. In orderto better analyze the basis for the discrimination power shown by the electronic tongue, aquantitative analysis was also envisaged. A fair estimation of the concentrations of thedifferent ions in the solutions studied appeared to be possible using this electronic tonguedesign.Keywords:

  1. Research Group Introduction : Welfare System Laboratory, Dept.of Electrical, Electronics and Computer Engineering, Chiba Institute of Technology

    Science.gov (United States)

    関, 弘和

    Welfare system laboratory in Chiba Institute of Technology consists of twenty students. The research subjects include the driving control system of electric powered wheelchairs, myoelectric hand control based on EMG signal analysis and non-daily behavior detection monitoring system for elderly people.

  2. Discussion about the application and trends of automotive electronic technology%浅谈汽车电子技术的应用现状和发展趋势

    Institute of Scientific and Technical Information of China (English)

    公培斌

    2014-01-01

    随着汽车在现代社会生活中的普及和重要性不断上升,使用者对汽车的舒适性、安全性和娱乐性的要求也越来越高,而这些很大程度上依赖于汽车电子技术的应用和发展。汽车电子技术是汽车技术与电子技术结合的产物,随着汽车工业与电子工业的不断发展,电子技术在现代汽车上的应用越来越广泛,汽车电子化程度越来越高。%As the importance of car is rising in the social life, customers want the car which is more safe, comfortable and interesting. That wil be realized by the development of automotive electronic technology. Automotive electronic technology is combined by automotive technology and electronic technology. With the development of automotive and electronics, modern car has been applied more and more electronic technology. This report wil discuss the application and trends of automotive electronic technology.

  3. Fiscal 1999 research report on long-term energy technology strategy. Basic research on industrial technology strategy (Individual technology strategy). Electronic information technology field (Human process ware field for computers); 1999 nendo choki energy gijutsu senryaku nado ni kansuru chsao hokokusho. Sangyo gijutsu senryaku sakutei kiban chosa (bun'yabetsu gijutsu senryaku) denshi joho gijutsu bun'ya (computer kanren bun'ya no uchi, human process wear bun'ya)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    This report summarizes the fiscal 1999 basic research result on industrial technology strategy of a human process ware (HPW) field on electronic information. Although the current HPW industry is not yet complete, various technologies concerned are being stored, and the HPW industry is expected as new major industry for home and personal information equipment. As factors hindering technological innovation in Japan, the incomplete market, poor cooperation between industry and government, ambiguous role of university, and poor standardization were pointed out. Technology trends were analyzed to extract seed technology fields from 3 viewpoints of mobile HPW available at any time, at any place and to anybody, HPW system capable of customizing every personal use, and HPW supporting development of a creativity. As general strategy, the technology seed chart and map of technical development targets for every HPW were prepared to conceive a route to practical use, and develop element technologies required for practical use, based on the future trend of the market. (NEDO)

  4. Superior oblique surgery: when and how?

    Directory of Open Access Journals (Sweden)

    Taylan Şekeroğlu H

    2013-08-01

    Full Text Available Hande Taylan Şekeroğlu,1 Ali Sefik Sanac,1 Umut Arslan,2 Emin Cumhur Sener11Department of Ophthalmology, 2Department of Biostatistics, Hacettepe University Faculty of Medicine, Ankara, TurkeyBackground: The purpose of this paper is to review different types of superior oblique muscle surgeries, to describe the main areas in clinical practice where superior oblique surgery is required or preferred, and to discuss the preferred types of superior oblique surgery with respect to their clinical outcomes.Methods: A consecutive nonrandomized retrospective series of patients who had undergone superior oblique muscle surgery as a single procedure were enrolled in the study. The diagnosis, clinical features, preoperative and postoperative vertical deviations in primary position, type of surgery, complications, and clinical outcomes were reviewed. The primary outcome measures were the type of strabismus and the type of superior oblique muscle surgery. The secondary outcome measure was the results of the surgeries.Results: The review identified 40 (20 male, 20 female patients with a median age of 6 (2–45 years. Nineteen patients (47.5% had Brown syndrome, eleven (27.5% had fourth nerve palsy, and ten (25.0% had horizontal deviations with A pattern. The most commonly performed surgery was superior oblique tenotomy in 29 (72.5% patients followed by superior oblique tuck in eleven (27.5% patients. The amount of vertical deviation in the fourth nerve palsy and Brown syndrome groups (P = 0.01 for both and the amount of A pattern in the A pattern group were significantly reduced postoperatively (P = 0.02.Conclusion: Surgery for the superior oblique muscle requires experience and appropriate preoperative evaluation in view of its challenging nature. The main indications are Brown syndrome, fourth nerve palsy, and A pattern deviations. Superior oblique surgery may be effective in terms of pattern collapse and correction of vertical deviations in primary

  5. 1989 Review Conference on New Electronic Technologies for the Elderly: Issues and Projects. Report of an Aspen Institute Conference (5th, Queenstown, Maryland, March 8-10, 1989). Communications and Society Forum Report #11.

    Science.gov (United States)

    Bollier, David

    This document presents summaries of conference presentations which attempted to assess how computer and communications technologies can be harnessed to meet the special needs of elderly people. Each of the eight sessions of the conference opened with experts discussing their respective research projects and electronic technologies: their origins,…

  6. Development of a Position Sensitive Microstrip Detector System and its Readout Electronics Using ASICs Technologies for SAMURAI

    Science.gov (United States)

    Saastamoinen, A.; Baba, H.; Blackmon, J. C.; Elson, J.; Kurokawa, M.; McCleskey, M.; Otsu, H.; Rasco, B. C.; Roeder, B. T.; Sobotka, L. G.; Trache, L.; Tribble, R. E.; Yoneda, K.; Zenihiro, J.

    We are building a Si detector tracker system for the SAMURAI spectrometer. Characterizing the behavior of the detectors and associated electronics is essential for properly analyzing the future experimental results. We have performed test experiments to study the detector system response to heavy ion and proton beams of various energies. In this contribution we present some of the results and give an outlook of the future plans.

  7. Development of a low noise integrated readout electronic for pixel detectors in CMOS technology for a Compton camera

    OpenAIRE

    Hausmann, Joachim

    2006-01-01

    Semiconductor detectors are very popular, particularly for their good energy resolution and their easy handling. Combined with a two dimensional spatial resolution such a detector is predestined to realise an active collimation in a Compton camera for medical applications. To measure the deposited energy in each channel (pixel), a self-triggering integrated electronic has been developed, which is directly bonded on top of the detector. The design of the low noise readout ele...

  8. E-Procurement System Technology: An Analysis in Electronic Procurement Service Unit (LPSE) of Kepulauan Riau Province

    OpenAIRE

    Rendra Setyadiharja; Shahril Budiman; Zamzami A Karim; Raja Abumanshur Matridi; Junriana Junriana; Ferizone Ferizone; Achmad Nurmandi

    2014-01-01

    The practice of corruption always exist in public goods and service procurement in Indonesia. The Government efforts in reducing this case are doing new breakthrough like creating new system of service and goods procurement in an electronic way, usually called E-Procurement. After being instructed by Presidential Regulation number 54, year of 2010, the Local Government must use the E-Procurement System in the process of goods and service procurement, including Kepulauan Riau Province. This Re...

  9. Advanced Electronic Systems for HEP Experiments, Astroparticle Physics, Accelerator Technology, FELs and Fusion; 2013 WILGA January Symposium (in Polish)

    CERN Document Server

    Romaniuk, R S

    2013-01-01

    The cycle of WILGA conferences [wilga.ise.pw.edu.pl] on Photonics and Web Engineering, Advanced Electronic Systems, under the auspices of IEEE, SPIE, KEiT PAN and WEiTI PW was initiated in 1998 by a Research Team PERG/ELHEP ISE PW. The WILGA conferences take place two times a year and the participants are young scientists from this country and abroad. This paper debates chosen topical tracks and some papers presented during the 31 WILGA Conference, which took place on 8-10 February 2013 at the Faculty of WEiTI PW. The conference was attended by over 60 persons. Here we discuss closer the subjects of biomedical electronics and informatics, as well as chosen aspects of applications of advanced electronic circuits and systems. The next 32 WILGA Conference will take place on 27 May – 02 June 2013 in WUT WILGA resort near Warsaw. Proposed conference papers are submitted via the WILGA Conference web page. Email for the correspondence is: photonics@ise.pw.edu.pl. The papers are published in journals Elektronika, I...

  10. 论电子级氢氟酸的纯化技术及其发展%On Electronic-Grade Hydrofluoric Acid Purification Technology and its Development

    Institute of Scientific and Technical Information of China (English)

    陈林; 邵勇; 朱龙

    2016-01-01

    After due phosphate rock as the main raw material for the production of fluorine by the national limit for fluoride products have a certain influence.With the rapid development of the international economy,the semiconductor industry has developed rapidly. Electronic grade hydrofluoric acid is the main chemical raw materials and a half monomers.From the current situation of electronic-grade hydrofluoric acid purification technology and the future development of two aspects of the research is intended to explore the development of purification technology,and produce the fluorite strategic conservation to create greater benefits for the economy and society.%磷矿石作为氟生产的主要原料,受到国家限制后,对于氟产品有了一定的影响。随着国际经济的快速发展,半导体产业也迅速发展。电子级氢氟酸是半单体的主要化学原料。从电子级氢氟酸纯化技术的现状和未来发展两个方面展开了研究,意在探索纯化技术的发展,以及对于萤石产生战略性保护,为经济和社会创造更大的效益。

  11. The Application of Proteus and Multisim Software in the Electronic Technology%Proteus和Multisim软件在电子技术中的应用

    Institute of Scientific and Technical Information of China (English)

    杨娜; 张文梅

    2015-01-01

    该文提出将Proteus和Multisim仿真软件融入到《模拟电子技术》和《数字电子技术》的教学中,在传统实验教学的基础上增加虚拟仿真实验,实验过程直观、形象、生动,有助于学生更加深刻和全面地理解电路的概念和原理,提高学生学习的积极主动性。%This paper discusses how to introduce Proteus and Multisim Simulation Software into the teaching of"analog electronic technology"and"digital electronic technology". This paper increases the virtual simulation experiment on the basis of traditional experiment teaching. Experimental process is intuitive and vivid to help students to understand the concept and principle of the cir⁃cuit more profound and comprehensive and improve students' learning initiative.

  12. 基于TRIZ理论的电子技术创新教学研究%Research on innovative teaching of Electronic Technology based on TRIZ

    Institute of Scientific and Technical Information of China (English)

    裴晓敏; 张军

    2011-01-01

    To combine TRIZ theory with specialized courses and establish the link between the innovative methodology and professional curriculum is one of the important ways to improve innovation ability of the students. In this paper, aiming at the specific issues on the teaching of electronic technology course, TRIZ are applied to the research of feasibility and fundamental way of innovative education process in which TRIZ theory and electronic technology courses are integrated together.%将TRIZ理论与专业课程相结合,建立创新方法与专业课之间的联系是提高学生创新能力的重要途径。文章以TRIZ理论为基础,针对电子技术课程教学中的具体问题,研究了TRIZ与电子技术课程相融合的创造教育的可行性和根本途径。

  13. 基于电子鼻技术的多基原莪术鉴定∗%Identification Curcumae Rhizoma of Multiple Sources Based on Electronic Nose Technology

    Institute of Scientific and Technical Information of China (English)

    李羿; 吴浩忠; 刘春生

    2015-01-01

    Objective To build a method of identifying Curcumae Rhizoma of multiple sources based on electronic nose technology.Methods The detective parameters of the samples and metal sensors were optimized by detector response values and the characteristic datum were used for statistical analysis through principal component analysis and discrimination factor analysis.Results The electronic nose detection method of Curcumae Rhizoma were established and the odor identification fingerprint of Curcumae Rhizoma were obtained.Conclution The method of identifying Curcumae Rhizoma of multiple sources based on electronic nose technology is feasible and provides a new idea for the identification of Traditional Chinese Medicine (TCM)and Chinese patent drugs.%目的:建立基于电子鼻技术的多基原莪术的鉴定方法。方法以检测器响应值为评价指标,优化样品的检测参数和筛选金属传感器,应用主成分分析和辨别因子分析对特征数据进行多元统计学分析。结果建立了多基原莪术的电子鼻检测法,得到其气味识别指纹图谱。结论基于电子鼻技术的多基原莪术鉴定方法可行,为中药材和中成药的鉴定提供了新思路。

  14. Whisker-related afferents in superior colliculus.

    Science.gov (United States)

    Castro-Alamancos, Manuel A; Favero, Morgana

    2016-05-01

    Rodents use their whiskers to explore the environment, and the superior colliculus is part of the neural circuits that process this sensorimotor information. Cells in the intermediate layers of the superior colliculus integrate trigeminotectal afferents from trigeminal complex and corticotectal afferents from barrel cortex. Using histological methods in mice, we found that trigeminotectal and corticotectal synapses overlap somewhat as they innervate the lower and upper portions of the intermediate granular layer, respectively. Using electrophysiological recordings and optogenetics in anesthetized mice in vivo, we showed that, similar to rats, whisker deflections produce two successive responses that are driven by trigeminotectal and corticotectal afferents. We then employed in vivo and slice experiments to characterize the response properties of these afferents. In vivo, corticotectal responses triggered by electrical stimulation of the barrel cortex evoke activity in the superior colliculus that increases with stimulus intensity and depresses with increasing frequency. In slices from adult mice, optogenetic activation of channelrhodopsin-expressing trigeminotectal and corticotectal fibers revealed that cells in the intermediate layers receive more efficacious trigeminotectal, than corticotectal, synaptic inputs. Moreover, the efficacy of trigeminotectal inputs depresses more strongly with increasing frequency than that of corticotectal inputs. The intermediate layers of superior colliculus appear to be tuned to process strong but infrequent trigeminal inputs and weak but more persistent cortical inputs, which explains features of sensory responsiveness, such as the robust rapid sensory adaptation of whisker responses in the superior colliculus. Copyright © 2016 the American Physiological Society.

  15. CRADA with Teledyne Electronic Technologies and Pacific Northwest National Laboratory (PNL-096): The Exposure-to-Risk monitoring system. Final letter report

    Energy Technology Data Exchange (ETDEWEB)

    Thrall, K.D.

    1996-10-01

    The purpose of this project was to demonstrate the ``Exposure-to- Risk`` monitoring system in an actual occupational environment. The system is a unique combination of existing hardware with proprietary software to create an integrated means of assessing occupational exposures to volatile organic compounds. One component of this system utilizes a portable mass spectrometer developed by Teledyne Electronic Technologies. Integration of the system was accomplished under Laboratory Directed Research and Development (LDRD) funding. Commercialization of the system will take place following demonstration in an actual occupational environment, and will include, in part, Teledyne Electronic Technologies. The Exposure-to-Risk monitoring system will benefit DOE by overcoming present-day limitations in worker health protection monitoring. There are numerous sites within the` DOE complex where many different hazardous chemicals are used on a routine basis. These chemicals range from paint stripers and cleaning solvents to chemical warfare agents, each having its own degree of potential adverse health risk to a worker. Thus, a real concern for DOE is to ensure that a worker is properly monitored to assess any adverse health risk from exposure to potentially hazardous chemicals. With current industrial hygiene technologies, this is an arduous task. The Exposure-to-Risk monitoring system integrates a patented breath-inlet device connecting a subject`s exhaled breath directly with a field-portable mass spectrometer with physiologically based pharmacokinetic (PBPK) modeling to estimate the target tissue dose following a chemical exposure. Estimation of the adverse health risk prediction follows from the exposure/dose calculation based on currently accepted methodologies. This new system can determine, in the field, the possible adverse health risks on a daily basis to an individual worker.

  16. Fiscal 1997 survey report. `Ultra high electronic technology development promotion project` under consignment from NEDO; 1997 nendo kenkyu seika hokokusho. Shin Energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku jigyo `Chosentan denshi gijutsu kaihatsu sokushin jigyo`

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-05-01

    For the purpose of establishing ultra high technology of a next next generation level, the R and D was conducted of ultra fine processing process technology, technologies on limit measuring/analysis/control and new functional electronic materials. Themes of the R and D are electronic beam direct picture drawing system technology, ultra short wavelength electromagnetic radiation patterning/system technology, ultra fine sensitizing technology, ultra high accuracy shading system technology, ultra high tech plasma reactive measuring/analysis/control technology, ultra high tech cleaning basic technology, ultra high sensitivity medium technology, new functional element/film formation technology, etc. This R and D is a greatly influential basic research in the whole industrial field, and therefore, it is necessary that researchers standing foremost in each field of industry/university/government join the project and that various R and D infrastructures are made the most of. For this, the concentrated joint research method and the dispersed joint research method are combined, and the R and D is being conduced by equal partnership of each researcher. 421 refs., 823 figs., 91 tabs.

  17. Empregabilidade do profissional formado nos cursos superiores de tecnologia do CEFET-PR: estudo de caso em médias e grandes empresas da região norte do Paraná Empregabilidad del profesional graduado en los cursos superiores de tecnología: estudio de caso en las medias y grandes empresas de la región norte del Paraná Empregability of the graduates in the undergraduate courses of technology: study of case in medium-sized and large companies in the northern region of the state Paraná

    Directory of Open Access Journals (Sweden)

    Eurico Pedroso de Almeida Junior

    2007-09-01

    Full Text Available O presente trabalho discute a necessidade das empresas da região Norte do Paraná, por profissionais formados nos Cursos Superiores de Tecnologia. Trata-se de uma pesquisa exploratória que, em função dos procedimentos técnicos adotados, pode ser caracterizada como um estudo de caso. O método de pesquisa empregado foi o indutivo. Os resultados mostram que há por parte das empresas a necessidade por profissionais formados nos Cursos Superiores de Tecnologia, na maioria dos casos, ele atua dentro de sua área de formação, e sua convivência com outros profissionais formados nas áreas tecnológicas ocorre normalmente. Concluiu-se que o tecnólogo no ambiente produtivo é um profissional necessário e que colabora em várias frentes, principalmente em face às novas tendências tecnológicas, uma vez que o mesmo recebe conhecimento teórico e prático e pode contribuir eficazmente tanto com as empresas quanto com a sociedade.Esa investigación discute la necesidad de las compañías del área Norte de Paraná por profesionales formados en las Universidades de Tecnología. Es una investigación exploratoria que, por los procedimientos técnicos adoptados, puede caracterizarse como un estudio de caso. El método de la investigación usado fue el inductivo. Los resultados confirman que hay por parte de las compañías la necesidad de profesionales formados en las Universidades de Tecnología; en la mayor parte de los casos ellos actúan dentro de su área de formación específica, y su convivencia con otros profesionales formados en las áreas tecnológicas ocurre normalmente. La conclusión de la investigación presenta el tecnólogo en el ambiente productivo como un profesional necesario a colaborar en varios frentes, principalmente si pensamos en las nuevas tendencias tecnológicas, una vez que él recibe el conocimiento teórico y práctico y puede contribuir eficazmente tanto con las compañías en cuanto a la sociedad.The present paper

  18. Electronic Commerce

    Directory of Open Access Journals (Sweden)

    Slavko Đerić

    2016-12-01

    Full Text Available Electronic commerce can be defined in different ways. Any definition helps to understand and explain that concept as better as possible.. Electronic commerce is a set of procedures and technologies that automate the tasks of financial transactions using electronic means. Also, according to some authors, electronic commerce is defined as a new concept, which is being developed and which includes process of buying and selling or exchanging products, services or information via computer networks, including the Internet. Electronic commerce is not limited just to buying and selling, but it also includes all pre-sales and after-sales ongoing activities along the supply chain. Introducing electronic commerce, using the Internet and Web services in business, realizes the way to a completely new type of economy - internet economy.

  19. 汽车电控自动变速技术及发展趋势%Electronically Controlled Automatic Transmission Car Technology and its Development Trend

    Institute of Scientific and Technical Information of China (English)

    宋燕

    2009-01-01

    The electronically controlled automatic transmission to achieve the best shift, with good economic and sexual power, low-pollution; stable and reliable work, well adapted to complex traffic conditions and geographical conditions; no impact on the process of shifting and vibration, the shift action accurate, timely and easily manipulated; and has a fault self-diagnosis function. In this paper, electronically controlled automatic transmission type, the basic principles of composition and control, electronically controlled automatic transmission technology trends.%电子控制自动变速器能实现最佳的换档规律,具有良好的经济性和动力性,污染低;工作稳定可靠,能很好地适应复杂的交通情况和地理条件;换档过程无冲击和振动,换档动作准确、及时,操纵方便;且具有故障自诊断功能.介绍电控自动变速器的类型、基本组成和控制原理及电控自动变速技术的发展趋势.

  20. Superior-subordinate relations as organizational processes

    DEFF Research Database (Denmark)

    Asmuss, Birte; Aggerholm, Helle Kryger; Oshima, Sae

    Since the emergence of the practice turn in social sciences (Golsorkhi et al. 2010), studies have shown a number of institutionally relevant aspects as achievements across time and by means of various resources (human and non-human) (Taylor & van Every 2000, Cooren et al. 2006). Such a process view...... on organizational practices relates closely to an increased focus on communication as being constitutive of the organization in general and the superior-subordinate relationship in specific. The current study aims to contribute to this line of research by investigating micro-practices involved in establishing...... superior-subordinate relations in a specific institutionalized setting: performance appraisal interviews (PAIs). While one main task of PAIs is to manage and integrate organizational and employee performance (Fletcher, 2001:473), PAIs are also organizational practices where superior-subordinate relations...

  1. Power Electronics

    DEFF Research Database (Denmark)

    Iov, Florin; Ciobotaru, Mihai; Blaabjerg, Frede

    2008-01-01

    is to change the electrical power production sources from the conventional, fossil (and short term) based energy sources to renewable energy resources. The other is to use high efficient power electronics in power generation, power transmission/distribution and end-user application. This paper discuss the most...... emerging renewable energy sources, wind energy, which by means of power electronics are changing from being a minor energy source to be acting as an important power source in the energy system. Power electronics is the enabling technology and the presentation will cover the development in wind turbine...... technology from kW to MW, discuss which power electronic solutions are most feasible and used today....

  2. Electron multi-beam technology for mask and wafer writing at 0.1nm address grid

    Science.gov (United States)

    Platzgummer, Elmar; Klein, Christof; Loeschner, Hans

    2013-03-01

    An overview of electron beam tool configurations is provided. The adoption of multi-beam writing is mandatory in order to fulfill industrial needs for 11nm HP nodes and below. IMS Nanofabrication realized a 50keV electron multibeam proof-of-concept (POC) tool confirming writing principles with 0.1nm address grid and lithography performance capability. The new architecture will be introduced for mask writing at first, but has also the potential for 1xmask (master template) and direct wafer writing. The POC system achieves the predicted 5nm 1sigma blur across the 82μm x 82μm array of 512 x 512 (262,144) programmable 20nm beams. 24nm HP has been demonstrated and complex patterns have been written in scanning stripe exposure mode. The first production worthy system for the 11nm HP mask node is scheduled for 2014 (Alpha), 2015 (Beta) and 1st generation HVM mask writer tools in 2016. Implementing a multi-axis column configuration, 50x / 100x productivity enhancements are possible for direct 300mm / 450mm wafer writing.

  3. Lake Superior Aquatic Invasive Species Complete Prevention Plan

    Science.gov (United States)

    The Lake Superior Aquatic Invasive Species Complete Prevention Plan is an expression of the best professional judgment of the members of the Lake Superior Task Force as to what is necessary to protect Lake Superior from new aquatic invasive species.

  4. Superior cross-species reference genes: a blueberry case study.

    Directory of Open Access Journals (Sweden)

    Jose V Die

    Full Text Available The advent of affordable Next Generation Sequencing technologies has had major impact on studies of many crop species, where access to genomic technologies and genome-scale data sets has been extremely limited until now. The recent development of genomic resources in blueberry will enable the application of high throughput gene expression approaches that should relatively quickly increase our understanding of blueberry physiology. These studies, however, require a highly accurate and robust workflow and make necessary the identification of reference genes with high expression stability for correct target gene normalization. To create a set of superior reference genes for blueberry expression analyses, we mined a publicly available transcriptome data set from blueberry for orthologs to a set of Arabidopsis genes that showed the most stable expression in a developmental series. In total, the expression stability of 13 putative reference genes was evaluated by qPCR and a set of new references with high stability values across a developmental series in fruits and floral buds of blueberry were identified. We also demonstrated the need to use at least two, preferably three, reference genes to avoid inconsistencies in results, even when superior reference genes are used. The new references identified here provide a valuable resource for accurate normalization of gene expression in Vaccinium spp. and may be useful for other members of the Ericaceae family as well.

  5. Superior cross-species reference genes: a blueberry case study.

    Science.gov (United States)

    Die, Jose V; Rowland, Lisa J

    2013-01-01

    The advent of affordable Next Generation Sequencing technologies has had major impact on studies of many crop species, where access to genomic technologies and genome-scale data sets has been extremely limited until now. The recent development of genomic resources in blueberry will enable the application of high throughput gene expression approaches that should relatively quickly increase our understanding of blueberry physiology. These studies, however, require a highly accurate and robust workflow and make necessary the identification of reference genes with high expression stability for correct target gene normalization. To create a set of superior reference genes for blueberry expression analyses, we mined a publicly available transcriptome data set from blueberry for orthologs to a set of Arabidopsis genes that showed the most stable expression in a developmental series. In total, the expression stability of 13 putative reference genes was evaluated by qPCR and a set of new references with high stability values across a developmental series in fruits and floral buds of blueberry were identified. We also demonstrated the need to use at least two, preferably three, reference genes to avoid inconsistencies in results, even when superior reference genes are used. The new references identified here provide a valuable resource for accurate normalization of gene expression in Vaccinium spp. and may be useful for other members of the Ericaceae family as well.

  6. Endovascular treatment of superior vena cava syndrome

    DEFF Research Database (Denmark)

    Duvnjak, Stevo; Andersen, Poul Erik

    2011-01-01

    Abstract AIM: The aim of this study was to report our experience with palliative stent treatment of superior vena cava syndrome. METHODS: Between January 2008 and December 2009, 30 patients (mean age 60.7 years) were treated with stents because of stenosed superior vena cava. All patients presented...... there was an immediate clinical improvement with considerable reduction in the edema of upper extremities and head. There was, however, continous dyspnea in five patients (17%) and two patients (7%) had persistent visible collateral venous circulations on the upper chest. There were no stent associated complications...

  7. 电子仪器PCB设计中EMC技术的应用%Application of EMC technology in PCB design of electronic instrument

    Institute of Scientific and Technical Information of China (English)

    冯玲

    2016-01-01

    Based on the continuous development of the field of electronic instrument PCB design, electromagnetic compatibility,signal integrity problems gradually emerge and based on,in order to meet the current electronic instrument application demand, contemporary and technical personnel in the process of PCB design should emphasize the application of EMC technology and through Protel99 se software of PCB design were analyzed,so as to achieve the optimum state of the PCB design,and to improve on this overall level of electronic instrument design,to meet the needs of contemporary social development.This paper starts with an overview of EMC,aiming to promote the further development of the current electronic instrument design field.%基于电子仪器PCB设计领域的不断发展,电磁兼容性、信号完整性等问题逐渐涌现出来,因而在此基础上,为了满足当前电子仪器应用需求,要求当代技术人员在PCB设计过程中应注重强调对EMC技术的应用,且透过PROTEL99 SE软件对PCB设计状况进行分析,由此达到最佳的PCB设计状态,并就此提升整体电子仪器设计水平,迎合当代社会发展需求。本文从EMC概述分析入手,旨在推动当前电子仪器设计领域的进一步发展。

  8. Facilitating superior chronic disease management through a knowledge-based systems development model.

    Science.gov (United States)

    Wickramasinghe, Nilmini S; Goldberg, Steve

    2008-01-01

    To date, the adoption and diffusion of technology-enabled solutions to deliver better healthcare has been slow. There are many reasons for this. One of the most significant is that the existing methodologies that are normally used in general for Information and Communications Technology (ICT) implementations tend to be less successful in a healthcare context. This paper describes a knowledge-based adaptive mapping to realisation methodology to traverse successfully from idea to realisation rapidly and without compromising rigour so that success ensues. It is discussed in connection with trying to implement superior ICT-enabled approaches to facilitate superior Chronic Disease Management (CDM).

  9. Magnetic resonance imaging evaluation of meniscoid superior labrum: normal variant or superior labral tear*

    Science.gov (United States)

    Simão, Marcelo Novelino; Vinson, Emily N.; Spritzer, Charles E.

    2016-01-01

    Objective The objective of this study was to determine the incidence of a "meniscoid" superior labrum. Materials and Methods This was a retrospective analysis of 582 magnetic resonance imaging examinations of shoulders. Of those 582 examinations, 110 were excluded, for a variety of reasons, and the final analysis therefore included 472 cases. Consensus readings were performed by three musculoskeletal radiologists using specific criteria to diagnose meniscoid labra. Results A meniscoid superior labrum was identified in 48 (10.2%) of the 472 cases evaluated. Arthroscopic proof was available in 21 cases (43.8%). In 10 (47.6%) of those 21 cases, the operative report did not include the mention a superior labral tear, thus suggesting the presence of a meniscoid labrum. In only one of those cases were there specific comments about a mobile superior labrum (i.e., meniscoid labrum). In the remaining 11 (52.4%), surgical correlation demonstrated superior labral tears. Conclusion A meniscoid superior labrum is not an infrequent finding. Depending upon assumptions and the requirement of surgical proof, the prevalence of a meniscoid superior labrum in this study was between 2.1% (surgically proven) and 4.8% (projected). However, superior labral tears are just as common and are often confused with meniscoid labra. PMID:27777474

  10. Characteristics and properties of metal aluminum thin films prepared by electron cyclotron resonance plasma-assisted atomic layer deposition technology

    Institute of Scientific and Technical Information of China (English)

    Xiong Yu-Qing; Li Xing-Cun; Chen Qiang; Lei Wen-Wen; Zhao Qiao; Sang Li-Jun; Liu Zhong-Wei; Wang Zheng-Duo; Yang Li-Zhen

    2012-01-01

    Metal aluminum (Al) thin films are prepared by 2450 MHz electron cyclotron resonance plasma-assisted atomic layer deposition on glass and p-Si substrates using trimethylaluminum as the precursor and hydrogen as the reductive gas.We focus our attention on the plasma source for the thin-film preparation and annealing of the as-deposited films relative to the surface square resistivity.The square resistivity of as-deposited Al films is greatly reduced after annealing and almost reaches the value of bulk metal.Through chemical and structural analysis,we conclude that the square resistivity is determined by neither the contaminant concentration nor the surface morphology,but by both the crystallinity and crystal size in this process.

  11. Health Information Technology Evaluation Framework (HITREF) Comprehensiveness as Assessed in Electronic Point-of-Care Documentation Systems Evaluations.

    Science.gov (United States)

    Sockolow, Paulina S; Bowles, Kathryn H; Rogers, Michelle

    2015-01-01

    We assessed the Health Information Technology (HIT) Reference-based Evaluation Framework (HITREF) comprehensiveness in two HIT evaluations in settings different from that in which the HITREF was developed. Clinician satisfaction themes that emerged from clinician interviews in the home care and the hospital studies were compared to the framework components. Across both studies, respondents commented on 12 of the 20 HITREF components within 5 of the 6 HITREF concepts. No new components emerged that were missing from the HITREF providing evidence that the HITREF is a comprehensive framework. HITREF use in a range of HIT evaluations by researchers new to the HITREF demonstrates that it can be used as intended. Therefore, we continue to recommend the HITREF as a comprehensive, research-based HIT evaluation framework to increase the capacity of informatics evaluators' use of best practice and evidence-based practice to support the credibility of their findings for fulfilling the purpose of program evaluation.

  12. Application of RFID Technology for Recovery of Electronic Wastes%射频识别技术在电子废弃物回收中的应用

    Institute of Scientific and Technical Information of China (English)

    贺振; 李光明; 安莹; 贺文智

    2012-01-01

    电子废弃物产量大、毒害重、资源性显著的特性已经引起人们广泛关注,电子废弃物的回收管理已成为研究热点,利用信息化技术管理电子废弃物回收工作将是未来发展的趋势。本文简要概述了无线射频识别技术(RadioFre.quencyIdentification,RFID)及依赖其识别特性和准确定位追踪的技术优势在各领域的广泛应用,继而从提高电子废弃物回收效率、利于全程管理和记录电子产品信息3个方面,对无线射频识别技术在电子废弃物回收中的应用优势进行了重点评述,并分析了其在电子废弃物回收管理过程中的重要意义。同时,结合目前无线射频识别技术在城市生活垃圾收运管理中的研究成果。对今后电子废弃物信息化回收管理做出了展望。%Electronic wastes have properties of high production, serious hazardous and reusability, which have caused wide attention. As a result, e-wastes recovery becomes a hot research topic. Application of information technology for e-wastes will be the trend of the future development. In this paper, the radio frequency identification (RFID) technology and its wide applications based on its technical advantages of identification, accurate positioning and tracking in different fields were introduced. Then the application advantage of RFID technology for e-wastes recovery was reviewed emphatically from three respects, i.e. , improving efficiency of e-wastes recovery, being beneficial to whole processing management and recording the information of electronic products. Furthermore, its importance during the process of e-wastes recovery and management were analyzed. Additionally, based on the researches of the application of RFID technology in the collection and transportation of municipal solid waste, the informatization of e-wastes recovery in future was prospected.

  13. 浅谈RO膜分离技术在电解铜箔生产废水回收处理中的应用%Discussion on RO membrane separation technology in electronic copper foil production wastewater recovery process application

    Institute of Scientific and Technical Information of China (English)

    叶敬敏; 杨燕芹

    2012-01-01

    简述了RO膜分离技术在电解铜箔生产废水回收处理中的应用,特别是对RO膜分离技术的系统组成、工艺特点、技术创新性作了一个较为详细的描述。%This paper mainly introduces the RO membrane separation technology in electronic copper foil production wastewater recycling process applications,especially for RO membrane separation technology system,technology characteristics,technology innovation by detailed description.

  14. Stretchable electronics

    CERN Document Server

    Someya, Takao

    2012-01-01

    With its comprehensive coverage this handbook and ready reference brings together some of the most outstanding scientists in the field to lay down the undisputed knowledge on how to make electronics stretchable.As such, it focuses on gathering and evaluating the materials, designs, models and technologies that enable the fabrication of fully elastic electronic devices which can sustain high strain. Furthermore, it provides a review of those specific applications that directly benefit from highly compliant electronics, including transistors, photonic devices and sensors. In addition to stre

  15. Development of a dedicated beam forming system for material and bioscience research with high intensity, small field electron beam of LILLYPUT 3 accelerator at Wroclaw Technology Park

    CERN Document Server

    Adrich, Przemysław; Wilk, Piotr; Chorowski, Maciej; Poliński, Jarosław; Bogdan, Piotr

    2016-01-01

    The primary use of the LILLYPUT 3 accelerator at the Nondestructive Testing Laboratory at Wroclaw Technology Park is X-ray radiography for nondestructive testing, including R&D of novel techniques for industrial and medical imaging. The scope of possible applications could be greatly extended by providing a system for irradiation with electron beam. The purpose of this work was to design such a system, especially for high dose rate, small field irradiations under cryogenic conditions for material and bioscience research. In this work, two possible solutions, based either on beam scanning or scattering and collimation, were studied and compared. It was found that under existing conditions efficiency of both systems would be comparable. The latter one was adopted due to its simplicity and much lower cost. The system design was optimized by means of detailed Monte Carlo modeling. The system is being currently fabricated at National Centre for Nuclear Research in \\'Swierk.

  16. The business end of health information technology. Can a fully integrated electronic health record increase provider productivity in a large community practice?

    Science.gov (United States)

    De Leon, Samantha; Connelly-Flores, Alison; Mostashari, Farzad; Shih, Sarah C

    2010-01-01

    Electronic health records (EHRs) are expected to transform and improve the way medicine is practiced. However, providers perceive many barriers toward implementing new health information technology. Specifically, they are most concerned about the potentially negative impact on their practice finances and productivity. This study compares the productivity of 75 providers at a large urban primary care practice from January 2005 to February 2009, before and after implementing an EHR system, using longitudinal mixed model analyses. While decreases in productivity were observed at the time the EHR system was implemented, most providers quickly recovered, showing increases in productivity per month shortly after EHR implementation. Overall, providers had significant productivity increases of 1.7% per month per provider from pre- to post-EHR adoption. The majority of the productivity gains occurred after the practice instituted a pay-for-performance program, enabled by the data capture of the EHRs. Coupled with pay-for-performance, EHRs can spur rapid gains in provider productivity.

  17. 电力电子技术在智能电网中的运用%Application of Power Electronics Technology in Smart Grid

    Institute of Scientific and Technical Information of China (English)

    王涌泉

    2015-01-01

    The smart grid has a very important role in China's power grid. But the development of economy brings new challenges, so it is necessary to introduce the power electronics technology to the smart grid so as to promote the more stable development of smart grid.%智能电网在我国的电网中具有十分重要的地位。但是经济的日益发展也为其带来了新的挑战,需要引用电力电子技术在智能电网中的指导作用,促进智能电网更稳定地向前发展。

  18. Development of gamma spectroscopy employing NaI(Tl) detector 3 inch x 3 inch and readout electronic of flash-ADC/FPGA-based technology

    Energy Technology Data Exchange (ETDEWEB)

    Hai, Vo Hong [HCMC-National Univ., Hochiminh City (Viet Nam). Inst. of Nuclear Physics; Ton Duc Thang Univ., Ho Chi Minh City (Viet Nam). Div. of Nuclear Physics; Hung, Nguyen Quoc [HCMC-National Univ., Hochiminh City (Viet Nam). Inst. of Nuclear Physics; Khai, Bui Tuan [Osaka Univ. (Japan). Dept. of Physics

    2015-05-15

    n this article the development of a gamma spectroscopy system is described using a scintillation detector NaI(Tl) of 3 inch x 3 inch. The readout electronic for the spectroscopy is built from the fast analog-digital conversion of Flash Analog-Digital Converter (Flash-ADC) 250 MHz - 8 bits resolution, and the embedded Field-Programmable Gate Array (FPGA) technology. The embedded VHSIC Hardware Description Language (VHDL) code for FPGA is built in such a way that it works as a multi channel analyser (MCA) with 4096 Digital Charge Integration (DCI) channels. A pulse generator with frequency varying from Hz up to 12 kHz is used to evaluate the time response of the system. Two standard radioisotope sources of {sup 133}Ba and {sup 152}Eu with multi gamma energies ranging from several tens keV to MeV are used to evaluate the linearity and energy resolution of the system.

  19. Evaluation of medication errors with implementation of electronic health record technology in the medical intensive care unit

    Directory of Open Access Journals (Sweden)

    Liao TV

    2017-05-01

    Full Text Available T Vivian Liao,1 Marina Rabinovich,2 Prasad Abraham,2 Sebastian Perez,3 Christiana DiPlotti,4 Jenny E Han,5 Greg S Martin,5 Eric Honig5 1Department of Pharmacy Practice, College of Pharmacy, Mercer Health Sciences Center, 2Department of Pharmacy and Clinical Nutrition, Grady Health System, 3Department of Surgery, Emory University, 4Pharmacy, Ingles Markets, 5Department of Medicine, Emory University, Atlanta, GA, USA Purpose: Patients in the intensive care unit (ICU are at an increased risk for medication errors (MEs and adverse drug events from multifactorial causes. ME rate ranges from 1.2 to 947 per 1,000 patient days in the medical ICU (MICU. Studies with the implementation of electronic health records (EHR have concluded that it significantly reduced overall prescribing errors and the number of errors that caused patient harm decreased. However, other types of errors, such as wrong dose and omission of required medications increased after EHR implementation. We sought to compare the number of MEs before and after EHR implementation in the MICU, with additional evaluation of error severity.Patients and methods: Prospective, observational, quality improvement study of all patients admitted to a single MICU service at an academic medical center. Patients were evaluated during four periods over 2 years: August–September 2010 (preimplementation; period I, January–February 2011 (2 months postimplementation; period II, August–September 2012 (21 months postimplementation; period III, and January–February 2013 (25 months postimplementation; period IV. All medication orders and administration records were reviewed by an ICU clinical pharmacist and ME was defined as a deviation from established standards for prescribing, dispensing, administering, or documenting medication. The frequency and classification of MEs were compared between groups by chi square; p<0.05 was considered significant.Results: There was a statistically significant increase

  20. Fiscal 1997 report under consignment from NEDO on the R and D of femto-second technology (development of ultra short pulse optoelectronics technology); 1997 nendo Shin energy Sangyo Gijutsu Sogo Kaihatsu Kiko itaku femto gyo technology no kenkyu kaihatsu (chotan pulse ko electronics gijutsu kaihatsu) seika hokokusho

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    Very high speed electronics technology is indispensable for the creation of industrial base technology which supports high grade informatizing in the 21st century. The state of light and electronics is controlled in the femto-second time domain. As to the development of femto-second light pulse generation/transmission technology, mode synchronous semiconductor laser was manufactured using the strain quantum well structure aiming at heightening profit, and the repeated frequency, 166GHz, was achieved. Relating to the pulse compression element, exciton photonic band was newly designed. A technology of coding was also studied. As to the development of technology of femto-second light pulse control/distribution, shortening of the wavelength down to 1.5{mu}m and a possibility of femto-second domain high speed response were indicated by the combined double quantum well structure. The quantitative measurement of spin relaxation characteristics was successfully made. By the Mach-Zehnder light switch, obtained was the world`s fastest light switching characteristic. To realize the femto-second class very high speed element, conditions were grasped on the crystal growth of Sb based ultra thin films operating in the 1.5{mu}m zone by studying the quantum well using transition among sub-bands. 242 refs., 280 figs., 12 tabs.