WorldWideScience

Sample records for superconductivity polymers composites

  1. Magnetic field expulsion in superconducting granular ceramics and in polymer/superconductor composites

    Energy Technology Data Exchange (ETDEWEB)

    Benlhachemi, A. [Univ. de Toulon et du Var, La Garde (France). Lab. des Materiaux Multiphases et Interfaces]|[Lab. de Chimie des Solides, Faculte des Sciences, Univ. Ibnou Zohr, Agadir (Morocco); Fremy, M.A.; Breandon, C.; Tatarenko, H.; Gavarri, J.R. [Univ. de Toulon et du Var, La Garde (France). Lab. des Materiaux Multiphases et Interfaces; Benyaich, H. [Lab. de Chimie des Solides, Faculte des Sciences, Univ. Ibnou Zohr, Agadir (Morocco)

    1998-05-01

    The magnetic interaction between a permanent magnet and superconducting ceramics such as YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} and Bi{sub 1.6}Pb{sub 0.4}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub (10+} {sub de} {sub lta)} depend on the superconducting state of each phase and on the junctions between grains. In the case of polymer/superconductor composites, screening effects depend on the volume fraction of superconductor. Measurements of the evolution of the levitation force (F=A/d{sup {gamma}}) as a function of the interaction distance d are used to characterize the effective response of the ceramics or composites to the magnetic flux penetration. Some of the abnormal variations of the exponent {gamma} and of the term A (in F=A/d{sup {gamma}}) could be reinterpreted in terms of a change in superconducting regime. Other observed variations of {gamma} should be due to the variation of the effective field from the cylindrical magnet. (orig.) 19 refs.

  2. Electronic materials high-T(sub c) superconductivity polymers and composites structural materials surface science and catalysts industry participation

    Science.gov (United States)

    1988-01-01

    The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.

  3. Electronic materials high-T(sub c) superconductivity polymers and composites structural materials surface science and catalysts industry participation

    Science.gov (United States)

    1988-01-01

    The fifth year of the Center for Advanced Materials was marked primarily by the significant scientific accomplishments of the research programs. The Electronics Materials program continued its work on the growth and characterization of gallium arsenide crystals, and the development of theories to understand the nature and distribution of defects in the crystals. The High Tc Superconductivity Program continued to make significant contributions to the field in theoretical and experimental work on both bulk materials and thin films and devices. The Ceramic Processing group developed a new technique for cladding YBCO superconductors for high current applications in work with the Electric Power Research Institute. The Polymers and Composites program published a number of important studies involving atomistic simulations of polymer surfaces with excellent correlations to experimental results. The new Enzymatic Synthesis of Materials project produced its first fluorinated polymers and successfully began engineering enzymes designed for materials synthesis. The structural Materials Program continued work on novel alloys, development of processing methods for advanced ceramics, and characterization of mechanical properties of these materials, including the newly documented characterization of cyclic fatigue crack propagation behavior in toughened ceramics. Finally, the Surface Science and Catalysis program made significant contributions to the understanding of microporous catalysts and the nature of surface structures and interface compounds.

  4. Polymer composites containing nanotubes

    Science.gov (United States)

    Bley, Richard A. (Inventor)

    2008-01-01

    The present invention relates to polymer composite materials containing carbon nanotubes, particularly to those containing singled-walled nanotubes. The invention provides a polymer composite comprising one or more base polymers, one or more functionalized m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers and carbon nanotubes. The invention also relates to functionalized m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers, particularly to m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers having side chain functionalization, and more particularly to m-phenylenevinylene-2,5-disubstituted-p-phenylenevinylene polymers having olefin side chains and alkyl epoxy side chains. The invention further relates to methods of making polymer composites comprising carbon nanotubes.

  5. Superconducting composites materials. Materiaux composites supraconducteurs

    Energy Technology Data Exchange (ETDEWEB)

    Kerjouan, P.; Boterel, F.; Lostec, J.; Bertot, J.P.; Haussonne, J.M. (Centre National d' Etudes des Telecommunications (CNET), 22 - Lannion (FR))

    1991-11-01

    The new superconductor materials with a high critical current own a large importance as well in the electronic components or in the electrotechnical devices fields. The deposit of such materials with the thick films technology is to be more and more developed in the years to come. Therefore, we tried to realize such thick films screen printed on alumina, and composed mainly of the YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} material. We first realized a composite material glass/YBa{sub 2}Cu{sub 3}O{sub 7-{delta}}, by analogy with the classical screen-printed inks where the glass ensures the bonding with the substrate. We thus realized different materials by using some different classes of glass. These materials owned a superconducting transition close to the one of the pure YBa{sub 2}Cu{sub 3}O{sub 7-{delta}} material. We made a slurry with the most significant composite materials and binders, and screen-printed them on an alumina substrate preliminary or not coated with a diffusion barrier layer. After firing, we studied the thick films adhesion, the alumina/glass/composite material interfaces, and their superconducting properties. 8 refs.; 14 figs.; 9 tabs.

  6. Precursor polymer compositions comprising polybenzimidazole

    Energy Technology Data Exchange (ETDEWEB)

    Klaehn, John R.; Peterson, Eric S.; Orme, Christopher J.

    2015-07-14

    Stable, high performance polymer compositions including polybenzimidazole (PBI) and a melamine-formaldehyde polymer, such as methylated, poly(melamine-co-formaldehyde), for forming structures such as films, fibers and bulky structures. The polymer compositions may be formed by combining polybenzimidazole with the melamine-formaldehyde polymer to form a precursor. The polybenzimidazole may be reacted and/or intertwined with the melamine-formaldehyde polymer to form the polymer composition. For example, a stable, free-standing film having a thickness of, for example, between about 5 .mu.m and about 30 .mu.m may be formed from the polymer composition. Such films may be used as gas separation membranes and may be submerged into water for extended periods without crazing and cracking. The polymer composition may also be used as a coating on substrates, such as metal and ceramics, or may be used for spinning fibers. Precursors for forming such polymer compositions are also disclosed.

  7. Precursor polymer compositions comprising polybenzimidazole

    Science.gov (United States)

    Klaehn, John R.; Peterson, Eric S.; Orme, Christopher J.

    2015-07-14

    Stable, high performance polymer compositions including polybenzimidazole (PBI) and a melamine-formaldehyde polymer, such as methylated, poly(melamine-co-formaldehyde), for forming structures such as films, fibers and bulky structures. The polymer compositions may be formed by combining polybenzimidazole with the melamine-formaldehyde polymer to form a precursor. The polybenzimidazole may be reacted and/or intertwined with the melamine-formaldehyde polymer to form the polymer composition. For example, a stable, free-standing film having a thickness of, for example, between about 5 .mu.m and about 30 .mu.m may be formed from the polymer composition. Such films may be used as gas separation membranes and may be submerged into water for extended periods without crazing and cracking. The polymer composition may also be used as a coating on substrates, such as metal and ceramics, or may be used for spinning fibers. Precursors for forming such polymer compositions are also disclosed.

  8. Composite conductor containing superconductive wires

    Energy Technology Data Exchange (ETDEWEB)

    Larson, W.L.; Wong, J.

    1974-03-26

    A superconductor cable substitute made by coworking multiple rods of superconductive niobium--titanium or niobium--zirconium alloy with a common copper matrix to extend the copper and rods to form a final elongated product which has superconductive wires distributed in a reduced cross-section copper conductor with a complete metallurgical bond between the normal-conductive copper and the superconductor wires contained therein is described. The superconductor cable can be in the form of a tube.

  9. Composite solid polymer electrolyte membranes

    Energy Technology Data Exchange (ETDEWEB)

    Formato, Richard M. (Shrewsbury, MA); Kovar, Robert F. (Wrentham, MA); Osenar, Paul (Watertown, MA); Landrau, Nelson (Marlborough, MA); Rubin, Leslie S. (Newton, MA)

    2001-06-19

    The present invention relates to composite solid polymer electrolyte membranes (SPEMs) which include a porous polymer substrate interpenetrated with an ion-conducting material. SPEMs of the present invention are useful in electrochemical applications, including fuel cells and electrodialysis.

  10. Manufacturing of superconductive silver/ceramic composites

    DEFF Research Database (Denmark)

    Seifi, Behrouz; Bech, Jakob Ilsted; Eriksen, Morten

    2000-01-01

    Manufacturing of superconducting metal/ceramic composites is a rather new discipline within materials forming processes. High Temperature SuperConductors, HTSC, are manufactured applying the Oxide-Powder-In-Tube process, OPIT. A ceramic powder containing lead, calcium, bismuth, strontium...... and current leading properties of the final superconducting fibres. The present work describes studies on alternative packing geometries and process parameters in the flat rolling operations. The aim is to obtain homogenous filaments with advantageous geometry and good texture while avoiding potential defects...

  11. Fire-safe polymers and polymer composites

    Science.gov (United States)

    Zhang, Huiqing

    The intrinsic relationships between polymer structure, composition and fire behavior have been explored to develop new fire-safe polymeric materials. Different experimental techniques, especially three milligram-scale methods---pyrolysis-combustion flow calorimetry (PCFC), simultaneous thermal analysis (STA) and pyrolysis GC/MS---have been combined to fully characterize the thermal decomposition and flammability of polymers and polymer composites. Thermal stability, mass loss rate, char yield and properties of decomposition volatiles were found to be the most important parameters in determining polymer flammability. Most polymers decompose by either an unzipping or a random chain scission mechanism with an endothermic decomposition of 100--900 J/g. Aromatic or heteroaromatic rings, conjugated double or triple bonds and heteroatoms such as halogens, N, O, S, P and Si are the basic structural units for fire-resistant polymers. The flammability of polymers can also be successfully estimated by combining pyrolysis GC/MS results or chemical structures with TGA results. The thermal decomposition and flammability of two groups of inherently fire-resistant polymers---poly(hydroxyamide) (PHA) and its derivatives, and bisphenol C (BPC II) polyarylates---have been systematically studied. PHA and most of its derivatives have extremely low heat release rates and very high char yields upon combustion. PHA and its halogen derivatives can completely cyclize into quasi-polybenzoxazole (PBO) structures at low temperatures. However, the methoxy and phosphate derivatives show a very different behavior during decomposition and combustion. Molecular modeling shows that the formation of an enol intermediate is the rate-determining step in the thermal cyclization of PHA. BPC II-polyarylate is another extremely flame-resistant polymer. It can be used as an efficient flame-retardant agent in copolymers and blends. From PCFC results, the total heat of combustion of these copolymers or blends

  12. Wear of polymers and composites

    CERN Document Server

    Abdelbary, Ahmed

    2015-01-01

    In the field of tribology, the wear behaviour of polymers and composite materials is considered a highly non-linear phenomenon. Wear of Polymers and Composites introduces fundamentals of polymers and composites tribology. The book suggests a new approach to explore the effect of applied load and surface defects on the fatigue wear behaviour of polymers, using a new tribometer and thorough experiments. It discusses effects of surface cracks, under different static and cyclic loading parameters on wear, and presents an intelligent algorithm, in the form of a neural network, to map the relations

  13. Multilayer Electroactive Polymer Composite Material

    Science.gov (United States)

    Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

    2011-01-01

    An electroactive material comprises multiple layers of electroactive composite with each layer having unique dielectric, electrical and mechanical properties that define an electromechanical operation thereof when affected by an external stimulus. For example, each layer can be (i) a 2-phase composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation, or (ii) a 3-phase composite having the elements of the 2-phase composite and further including a third component of micro-sized to nano-sized particles of an electroactive ceramic incorporated in the polymer matrix.

  14. Charge Aspects of Composite Pair Superconductivity

    Science.gov (United States)

    Flint, Rebecca

    2014-03-01

    Conventional Cooper pairs form from well-defined electronic quasiparticles, making the internal structure of the pair irrelevant. However, in the 115 family of superconductors, the heavy electrons are forming as they pair and the internal pair structure becomes as important as the pairing mechanism. Conventional spin fluctuation mediated pairing cannot capture the direct transition from incoherent local moments to heavy fermion superconductivity, but the formation of composite pairs favored by the two channel Kondo effect can. These composite pairs are local d-wave pairs formed by two conduction electrons in orthogonal Kondo channels screening the same local moment. Composite pairing shares the same symmetries as magnetically mediated pairing, however, only composite pairing necessarily involves a redistribution of charge within the unit cell originating from the internal pair structure, both as a monopole (valence change) and a quadrupole effect. This redistribution will onset sharply at the superconducting transition temperature. A smoking gun test for composite pairing is therefore a sharp signature at Tc - for example, a cusp in the Mossbauer isomer shift in NpPd5Al2 or in the NQR shift in (Ce,Pu)CoIn5.

  15. Manufacturing of superconductive silver/ceramic composites

    DEFF Research Database (Denmark)

    Seifi, Behrouz; Bech, Jakob Ilsted; Eriksen, Morten

    2000-01-01

    Manufacturing of superconducting metal/ceramic composites is a rather new discipline within materials forming processes. High Temperature SuperConductors, HTSC, are manufactured applying the Oxide-Powder-In-Tube process, OPIT. A ceramic powder containing lead, calcium, bismuth, strontium......, and copper oxides is inserted into a silver tube and reduced by multi-step drawing. These single-filaments are packed in a new silver tube thus forming a multi-filament containing e.g. 37 single-filaments, which is subsequently reduced by drawing and rolling to tapes approximately 0.2 mm thick by 3 mm wide...

  16. Carbon nanotube-polymer composite actuators

    Science.gov (United States)

    Gennett, Thomas; Raffaelle, Ryne P.; Landi, Brian J.; Heben, Michael J.

    2008-04-22

    The present invention discloses a carbon nanotube (SWNT)-polymer composite actuator and method to make such actuator. A series of uniform composites was prepared by dispersing purified single wall nanotubes with varying weight percents into a polymer matrix, followed by solution casting. The resulting nanotube-polymer composite was then successfully used to form a nanotube polymer actuator.

  17. Polymer - Ceramic Composites.

    Science.gov (United States)

    1988-04-01

    characteristic properties of our composite films are then compared with those of Piezel, a commercially available composite, manufactured by the Daikin Industry...S obtained on PIEZEL (composite of PZT and PVDF copolymer, supplied by Daikin Industries Limited of Japan) are also presented. 1% % .... . ,,, ,,,,~m

  18. Polyamide 6 single polymer composites

    Directory of Open Access Journals (Sweden)

    2009-08-01

    Full Text Available Combining the two basic techniques used for the preparation of single polymer composites (SPCs, hot compaction and film stacking, a polyamide 6 (PA 6 single polymer composite was manufactured. The starting materials were PA 6 high tenacity yarn (reinforcement and PA 6 film prepared via melt quenching (matrix, both expected to be the two principal polymorphic modifications of PA 6 and thus differing in their melting temperatures. The prepared single polymer composite is characterized by a layered structure and shows superior mechanical properties due to the good wetting – tensile modulus is improved by 200% and the ultimate tensile strength – by 300–400% as compared to the isotropic matrix film. Improvement of the interfacial adhesion via transreactions promoted by Sb2O3 as a catalyst was also undertaken.

  19. High temperature polymer matrix composites

    Science.gov (United States)

    Serafini, Tito T. (Editor)

    1987-01-01

    These are the proceedings of the High Temperature Polymer Matrix Composites Conference held at the NASA Lewis Research Center on March 16 to 18, 1983. The purpose of the conference is to provide scientists and engineers working in the field of high temperature polymer matrix composites an opportunity to review, exchange, and assess the latest developments in this rapidly expanding area of materials technology. Technical papers are presented in the following areas: (1) matrix development; (2) adhesive development; (3) Characterization; (4) environmental effects; and (5) applications.

  20. Polymer compositions and methods

    Energy Technology Data Exchange (ETDEWEB)

    Allen, Scott D.; Willkomm, Wayne R.

    2016-09-27

    The present invention encompasses polyurethane compositions comprising aliphatic polycarbonate chains. In one aspect, the present invention encompasses polyurethane foams, thermoplastics and elastomers derived from aliphatic polycarbonate polyols and polyisocyanates wherein the polyol chains contain a primary repeating unit having a structure: ##STR00001## In another aspect, the invention provides articles comprising the inventive foam and elastomer compositions as well as methods of making such compositions.

  1. Polymer-clay Nano Composites

    Directory of Open Access Journals (Sweden)

    R. S. Chauhan

    2006-10-01

    Full Text Available Nano has now become a theme in almost all the established discipline. The confluence ofinnovative methodologies, sophisticated characterisation techniques, and potential technologicalutility has resulted in intense research activity in the field of polymer nano composites. Polymercomposites made out of nano materials display unique properties in terms of improved tensilestrength, flexibility, and flexural endurance. The paper discusses the development of polymerclaynano composites, both from the conceptual point of view as well as practical methods forthe synthesis of nano composites. These are monomer intercalation, monomer modification,common solvent, and melt-intercalation methods. Various models have been discussed thatdescribe improvements in mechanical and barriers properties due to the incorporation of nanomaterials. Ongoing R&D work in the two DRDO laboratories on the development of nanocomposites has been briefly mentioned. The emerging use of polymer-nano composites has alsobeen described.

  2. Synthesis and superconductivity of (Agx/CuTl-1223 composites

    Directory of Open Access Journals (Sweden)

    Abdul Jabbar

    2015-06-01

    Full Text Available Series of (Agx/(Cu0.5Tl0.5Ba2Ca2Cu3O10-δ {(Agx/CuTl-1223} nano-superconductor composites were synthesized with different concentrations (i.e. x=0~4.0 wt% of silver (Ag nanoparticles. Low anisotropic CuTl-1223 superconducting matrix was prepared by solid-state reaction and Ag nanoparticles were prepared by a sol–gel method separately. The required (Agx/CuTl-1223 composition was obtained by the inclusion of Ag nanoparticles in CuTl-1223 superconducting matrix. Structural, morphological, compositional and superconducting transport properties of these composites were investigated in detail by x-ray diffraction (XRD, scanning electron microscopy (SEM, energy dispersive x-rays (EDX spectroscopy and four-point probe electrical resistivity (ρ measurements. The inclusion of Ag nanoparticles enhanced the superconducting properties without affecting the tetragonal structure of the host CuTl-1223 matrix. The improvement in superconducting properties of (Agx/CuTl-1223 composites is most likely due to enhanced inter-grains coupling and increased superconducting volume fraction after the addition of metallic Ag nanoparticles at the inter-crystallite sites in the samples. The presence of Ag nanoparticles at the grain-boundaries may increase the number of flux pinning centers, which were present in the form of weak-links in the pure CuTl-1223 superconducting matrix.

  3. Nano-fabricated superconducting radio-frequency composites, method for producing nano-fabricated superconducting rf composites

    Science.gov (United States)

    Norem, James H.; Pellin, Michael J.

    2013-06-11

    Superconducting rf is limited by a wide range of failure mechanisms inherent in the typical manufacture methods. This invention provides a method for fabricating superconducting rf structures comprising coating the structures with single atomic-layer thick films of alternating chemical composition. Also provided is a cavity defining the invented laminate structure.

  4. Polymer film composite transducer

    Science.gov (United States)

    Owen, Thomas E.

    2005-09-20

    A composite piezoelectric transducer, whose piezoeletric element is a "ribbon wound" film of piezolectric material. As the film is excited, it expands and contracts, which results in expansion and contraction of the diameter of the entire ribbon winding. This is accompanied by expansion and contraction of the thickness of the ribbon winding, such that the sound radiating plate may be placed on the side of the winding.

  5. Cryogenic deformation of high temperature superconductive composite structures

    Energy Technology Data Exchange (ETDEWEB)

    Roberts, Peter R. (Groton, MA); Michels, William (Brookline, MA); Bingert, John F. (Jemez Springs, NM)

    2001-01-01

    An improvement in a process of preparing a composite high temperature oxide superconductive wire is provided and involves conducting at least one cross-sectional reduction step in the processing preparation of the wire at sub-ambient temperatures.

  6. Composites incorporated a conductive polymer nanofiber network

    Energy Technology Data Exchange (ETDEWEB)

    Pozzo, Lilo Danielle; Newbloom, Gregory

    2017-04-11

    Methods of forming composites that incorporate networks of conductive polymer nanofibers are provided. Networks of less-than conductive polymers are first formed and then doped with a chemical dopant to provide networks of conductive polymers. The networks of conductive polymers are then incorporated into a matrix in order to improve the conductivity of the matrix. The formed composites are useful as conductive coatings for applications including electromagnetic energy management on exterior surfaces of vehicles.

  7. Asphaltenes-based polymer nano-composites

    Science.gov (United States)

    Bowen, III, Daniel E

    2013-12-17

    Inventive composite materials are provided. The composite is preferably a nano-composite, and comprises an asphaltene, or a mixture of asphaltenes, blended with a polymer. The polymer can be any polymer in need of altered properties, including those selected from the group consisting of epoxies, acrylics, urethanes, silicones, cyanoacrylates, vulcanized rubber, phenol-formaldehyde, melamine-formaldehyde, urea-formaldehyde, imides, esters, cyanate esters, allyl resins.

  8. Normal zone propagation in adiabatic superconducting magnets: Pt. 1; Normal zone propagation velocity in superconducting composites

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Z.P.; Iwasa, Y. (Massachusetts Inst. of Tech., Cambridge, MA (United States). Francis Bitter National Magnet Lab. Massachusetts Inst. of Tech., Cambridge, MA (United States). Plasma Fusion Center)

    1991-09-01

    A normal zone propagation model has been developed for superconducting composites under adiabatic conditions. It is based on the Whetstone-Roos model, originally developed for normal zone propagation in adiabatic wires of unclad superconductor. The model takes into account the temperature and magnetic field dependent material properties, for both superconductor and matrix metal. Analytical results agree well with experimental data. (author).

  9. Polymer/mesoporous metal oxide composites

    Science.gov (United States)

    Ver Meer, Melissa Ann

    Understanding the nature of the interfacial region between an organic polymer matrix and an inorganic filler component is essential in determining how this region impacts the overall bulk properties of the organic/inorganic hybrid composite material. In this work, polystyrene was used as the model polymer matrix coupled with silica-based filler materials to investigate the nature of structure-property relationships in polymer composites. Initial work was conducted on synthesis and characterization of colloidal and mesoporous silica particles melt blended into the polystyrene matrix. Modification of the interface was accomplished by chemically bonding the silica particles with the polystyrene chains through polymerization from the particle surface via atom transfer radical polymerization. High molecular weight polystyrene chains were formed and bulk test samples were evaluated with increased thermal stability of the grafted polymer composite system versus equivalent melt blended polymer composites. Polymer grafting was also conducted from the internal pores of mesoporous silica, further improving the thermal stability of the composite system without degrading dynamic mechanical properties. Characterization of the polymer composites was conducted with gel permeation chromatography, transmission electron microscopy, thermogravimetric analysis and dynamic mechanical analysis. It was also discovered during the polystyrene-silica composite studies that amorphous polystyrene can possess a less mobile phase, evident in a second peak of the loss tangent (tan delta). The long annealing times necessitated by the mesoporous silica composites were replicated in as received polystyrene. This new, less mobile phase is of particular interest in determining the mobility of polymer chains in the interfacial region.

  10. Multistable current states in high-temperature superconducting composites

    Science.gov (United States)

    Romanovskii, V. R.

    2016-09-01

    Conditions for current instabilities that arise in high-temperature superconducting composites with essentially nonlinear dependences of the critical current densities and resistivity on the temperature and magnetic induction have been studied. The analysis has been conducted in terms of zero-dimensional models, which has made it possible to formulate general physical mechanisms behind the formation of currents states in superconducting composites according to the external magnetic field induction, cooling conditions, and the properties of the superconductor and cladding. The possible existence of current and temperature stable steps, as well as stable steps of the electric field strength, in the absence of the superconducting-normal transition, has been demonstrated. Reasons for instabilities under multistable current states have been discussed.

  11. Review on Rare Earth/Polymer Composite

    Institute of Scientific and Technical Information of China (English)

    刘力; 张立群; 赵素合; 金日光; 刘美琳

    2002-01-01

    The special properties of rare earth/polymer composite were described. More emph asis was put on the radiation shielding and magnetic properties. In the applicat ion to X-ray shielding, rare earth/polymer composite can make up the feeble abs o rbing area. If the rare earth content is high enough, it can demonstrate strong ability for thermal neutron absorption; The composite has strong paramagnetism. The feasibility of preparing magnetic rare earth/polymer composite was discussed . In addition, three preparation methods were introduced: simple polymerization, mixing and reaction processing. The effect of the rare earth/polymer composites pre -sturcture and the coordinate number of rare earth ions on the light property w as a nalyzed. Rare earth/polymer composite may have the structure and property simlar to those of the ionomer. The feasibility of the in-situ preparation of the rare earth/polymer nano structure is indicated. Besides, the relationship betwe en structure and properties of the rare earth/polymer composite was discussed. T he problems associated with such composite materials were also presented.

  12. Combinatorial search of superconductivity in Fe-B composition spreads

    Directory of Open Access Journals (Sweden)

    Kui Jin

    2013-10-01

    Full Text Available We have fabricated Fe-B thin film composition spreads in search of possible superconducting phases following a theoretical prediction by Kolmogorov [Phys. Rev. Lett. 105, 217003 (2010]. Co-sputtering was used to deposit spreads covering a large compositional region of the Fe-B binary phase diagram. A trace of superconducting phase was found in the nanocrystalline part of the spread, where the film undergoes a metal to insulator transition as a function of composition in a region with the average composition of FeB2. The resistance drop occurs at 4 K, and a diamagnetic signal has also been detected at the same temperature. From the field-dependent resistive transition behavior, we estimate the upper critical field to be approximately 2 T.

  13. Gate-induced superconductivity in a solution-processed organic polymer film.

    Science.gov (United States)

    Schön, J H; Dodabalapur, A; Bao, Z; Kloc, C; Schenker, O; Batlogg, B

    2001-03-08

    The electrical and optical properties of conjugated polymers have received considerable attention in the context of potentially low-cost replacements for conventional metals and inorganic semiconductors. Charge transport in these organic materials has been characterized in both the doped-metallic and the semiconducting state, but superconductivity has not hitherto been observed in these polymers. Here we report a distinct metal-insulator transition and metallic levels of conductivity in a polymer field-effect transistor. The active material is solution-cast regioregular poly(3-hexylthiophene), which forms relatively well ordered films owing to self-organization, and which yields a high charge carrier mobility (0.05-0.1 cm2 V(-1) s(-1)) at room temperature. At temperatures below approximately 2.35 K with sheet carrier densities exceeding 2.5 x 10(14) cm(-2), the polythiophene film becomes superconducting. The appearance of superconductivity seems to be closely related to the self-assembly properties of the polymer, as the introduction of additional disorder is found to suppress superconductivity. Our findings therefore demonstrate the feasibility of tuning the electrical properties of conjugated polymers over the largest range possible-from insulating to superconducting.

  14. Tribology of natural fiber polymer composites

    CERN Document Server

    Chand, N

    2008-01-01

    Environmental concerns are driving demand for bio-degradable materials such as plant-based natural fiber reinforced polymer composites. These composites are fast replacing conventional materials in many applications, especially in automobiles, where tribology (friction, lubrication and wear) is important. This book covers the availability and processing of natural fiber polymer composites and their structural, thermal, mechanical and, in particular, tribological properties.Chapter 1 discusses sources of natural fibers, their extraction and surface modification. It also reviews the ther

  15. Possible Superconductivity at 37 K in Graphite-Sulphur Composite

    Institute of Scientific and Technical Information of China (English)

    杨海朋; 闻海虎; 赵志文; 李世亮

    2001-01-01

    Sulphur intercalated graphite composites with diamagnetic transitions at 6.7 and 37K are prepared. The magnetization hysteresis loops (MHL), x-ray diffraction (XRD) patterns, and resistance have been measured. From the MHL, a slight superconducting-like penetration process is observed at 15K in the low field region. The XRD shows no large difference from the mixture of graphite and sulphur indicating that the volume of the superconducting phase (if any) is very small. The temperature dependence of resistance shows a typical semi-conducting behaviour with a saturation in the low-temperature region. This saturation is either induced by the delocalization of conducting electrons or by possible superconductivity in this system.

  16. Fluid Effects in Polymers and Polymeric Composites

    CERN Document Server

    Weitsman, Y Jack

    2012-01-01

    Fluid Effects in Polymers and Polymeric Composites, written by the late Dr. Y. Jack Weitsman, addresses the wide range of parameters that affect the interaction of fluids with polymers and polymeric composites. The book aims at broadening the scope of available data, mostly limited up to this time to weight-gain recordings of fluid ingress into polymers and composites, to the practical circumstances of fluctuating exposure. Various forms of experimental data are given, in conjunction with theoretical models derived from basic scientific principles, and correlated with severity of exposure conditions and interpreted by means of rationally based theoretical models. The practical implications of the effects of fluids are discussed. The issue of fluid effects on polymers and polymeric composites is of concern to engineers and scientists active in aerospace and naval structures, as an increasing portion of these structures are made of polymeric composites and employ polymeric adhesives as a joining device. While...

  17. Polymer Composites for Intelligent Food Packaging

    Science.gov (United States)

    He, Jiating; Yap, Ray Chin Chong; Wong, Siew Yee; Li, Xu

    2015-09-01

    Over the last 50 years, remarkable improvements in mechanical and barrier properties of polymer composites have been realized. Their improved properties have been widely studied and employed for food packaging to keep food fresh, clean and suitable for consumption over sufficiently long storage period. In this paper, the current progress of science and technology development of polymer composites for intelligent food packaging will be highlighted. Future directions and perspectives for exploring polymer composites for intelligent food packaging to reveal freshness and quality of food packaged will also be put forward.

  18. Complex Multifunctional Polymer/Carbon-Nanotube Composites

    Science.gov (United States)

    Patel, Pritesh; Balasubramaniyam, Gobinath; Chen, Jian

    2009-01-01

    A methodology for developing complex multifunctional materials that consist of or contain polymer/carbon-nanotube composites has been conceived. As used here, "multifunctional" signifies having additional and/or enhanced physical properties that polymers or polymer-matrix composites would not ordinarily be expected to have. Such properties include useful amounts of electrical conductivity, increased thermal conductivity, and/or increased strength. In the present methodology, these properties are imparted to a given composite through the choice and processing of its polymeric and CNT constituents.

  19. Mechanics of biological polymer composites

    Science.gov (United States)

    Lomakin, Joseph

    2009-12-01

    Cartilage and cuticle are two natural materials capable of remarkable mechanical performance, especially considering the limitations on composition and processing conditions under which they are constructed. Their impressive properties are postulated to be a consequence of their complex multi-scale organization which has commonly been characterized by biochemical and microscopic methods. The objective of this dissertation is to overcome the limitations of such methods with mechanical analysis techniques generally reserved for the study of synthetic polymers. Methods for transient and dynamic mechanical analysis (DMA) of porcine TMJ disc sections and Tribolium castaneum and Tenebrio molitor elytral (modified forewing) cuticle were developed to characterize the mechanical performance of these biomaterials. The TMJ disc dynamic elastic modulus (E') was determined to be a strong function of disc orientation and pretension ranging from 700+/-240 kPa at (1g pretension) in the mediolateral direction to 73+/-8.5 MPa (150g preload) in the anteroposterior direction. Analogous mechanical testing was used to understand the relationship between composition and mechanical properties of beetle elytral cuticle at variable stages of maturation (tanning). Untanned elytra of both beetle species were ductile with a Young's modulus (E) of 44+/-8 MPa, but became brittle with an E of 2400+/-1100 MPa when fully tanned. Significantly, the E' of the TMJ disc and elytral cuticle exhibited a weak power law increase as a function of oscillation frequency. The exponent of the power law fit ( n) was determined to be a sensitive measure of molecular structure within these biomaterials. With increasing cuticular tanning, more so than with drying, the frequency dependence of cuticle E' diminished, suggesting cuticular cross-linking was an important component of tanning, as postulated by the quinone tanning hypothesis. The natural Black phenotype as well as TcADC iRNA suppressed Tribolium cuticle

  20. Hydroxyapatite/polymer composites for bone replacement

    NARCIS (Netherlands)

    Liu, Qing

    1997-01-01

    To improve the mechanical properties and the bioactivity of PolyacitveTM, hydroxyapatite particles were chosen as filler to reinforce the polymer. In making composites, the interface between hydroxyapatite particles and polymer plays an important role in determining the ultimate mechanical propertie

  1. Hydroxyapatite/polymer composites for bone replacement

    NARCIS (Netherlands)

    Liu, Q.; Liu, Qing

    1997-01-01

    To improve the mechanical properties and the bioactivity of PolyacitveTM, hydroxyapatite particles were chosen as filler to reinforce the polymer. In making composites, the interface between hydroxyapatite particles and polymer plays an important role in determining the ultimate mechanical propertie

  2. High temperature performance of polymer composites

    CERN Document Server

    Keller, Thomas

    2014-01-01

    The authors explain the changes in the thermophysical and thermomechanical properties of polymer composites under elevated temperatures and fire conditions. Using microscale physical and chemical concepts they allow researchers to find reliable solutions to their engineering needs on the macroscale. In a unique combination of experimental results and quantitative models, a framework is developed to realistically predict the behavior of a variety of polymer composite materials over a wide range of thermal and mechanical loads. In addition, the authors treat extreme fire scenarios up to more than 1000°C for two hours, presenting heat-protection methods to improve the fire resistance of composite materials and full-scale structural members, and discuss their performance after fire exposure. Thanks to the microscopic approach, the developed models are valid for a variety of polymer composites and structural members, making this work applicable to a wide audience, including materials scientists, polymer chemist...

  3. Piezoresistive polymer composites for cantilever readout

    DEFF Research Database (Denmark)

    Lillemose, Michael

    concentrations. No signicant piezoresistive eect was observed for the silver nanoparticle doped composites. Thin lm structures of the intrinsically conductive polymer, polyaniline, have been fabricated and a negative piezoresistive eect was observed. Thin gold lms were investigated, with the aim of measuring...... thin lm can be strained, while measuring how the resistance changes. This allows the determination of the strain sensitivity of the materials. Three qualitatively dierent material types have been investigated: conductive polymer composites, an intrinsically conductive polymer and thin gold lms....... Conducting polymer composites consisting of SU-8 (an epoxy based photoresist) and dierent concentrations of carbon- and silver nanoparticles have been investigated. For the carbon nanoparticle doped SU-8 composites, a positive piezoresistive eect was measured, with the largest eect towards the lower...

  4. Microwave Processed Multifunctional Polymer Matrix Composites Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has identified polymer matrix composites (PMCs) as a critical need for launch and in-space vehicles, but the significant costs of such materials limits their...

  5. Polymer Matrix Composite Material Oxygen Compatibility

    Science.gov (United States)

    Owens, Tom

    2001-01-01

    Carbon fiber/polymer matrix composite materials look promising as a material to construct liquid oxygen (LOX) tanks. Based on mechanical impact tests the risk will be greater than aluminum, however, the risk can probably be managed to an acceptable level. Proper tank design and operation can minimize risk. A risk assessment (hazard analysis) will be used to determine the overall acceptability for using polymer matrix composite materials.

  6. Drilling of polymer-matrix composites

    CERN Document Server

    Krishnaraj, Vijayan; Davim, J Paulo

    2013-01-01

    Polymeric composites are recognised as good candidates for structural components due to their inherent properties. However, they present several kinds of damages while creating holes for assembly. Delamination is considered the most serious damage since it reduces service life of the component. Thrust and delamination can be controlled by proper drill point geometry. Drilling at high speed is also a current requirement of the aerospace industry. This book focus on drilling of polymer matrix composites for aerospace and defence applications. The book presents introduction to machining of polymer composites and discusses drilling as a processing of composites.

  7. Review on Rare Earth/Polymer Composite

    Institute of Scientific and Technical Information of China (English)

    刘力; 刘美琳; 等

    2002-01-01

    The epecial properties of rare earth/polymer composite were described.More emphasis was put on the radiation shielding and magnetic properties,In the application to X-ray shielding,rare earth/polymer composite can make up the feeble absorbing area.If the rare earth content is high enough,it can demonstrate strong ability for thermal neutron absorption,The composite has strong paramagnetism.The feasibility of preparing magnetic rare earth/polymer compostite was discussed,In addition,three preparation methods were introducde:simlle polymerization,mixing and reaction processing,The effect of the rare earth/polymer composties pre-sturcture and the coordinate number of rare eatrh ions on the light property was analyzed,Rare earth/polmer compostie may have the structure and property simlar to those of the ionomer,The feasibility of the in-situ preparation of the rare earth/polymer nano structure is indicated ,Besides,the relationship between struchture and properties of the rare earth/polymer composite was discussed,The problems associated with such composite materials were also presented.

  8. Superconductivity

    CERN Document Server

    Poole, Charles P; Farach, Horacio A

    1995-01-01

    Superconductivity covers the nature of the phenomenon of superconductivity. The book discusses the fundamental principles of superconductivity; the essential features of the superconducting state-the phenomena of zero resistance and perfect diamagnetism; and the properties of the various classes of superconductors, including the organics, the buckministerfullerenes, and the precursors to the cuprates. The text also describes superconductivity from the viewpoint of thermodynamics and provides expressions for the free energy; the Ginzburg-Landau and BCS theories; and the structures of the high

  9. Mechanically stiff, electrically conductive composites of polymers and carbon nanotubes

    Science.gov (United States)

    Worsley, Marcus A.; Kucheyev, Sergei O.; Baumann, Theodore F.; Kuntz, Joshua D.; Satcher, Jr., Joe H.; Hamza, Alex V.

    2015-07-21

    Using SWNT-CA as scaffolds to fabricate stiff, highly conductive polymer (PDMS) composites. The SWNT-CA is immersing in a polymer resin to produce a SWNT-CA infiltrated with a polymer resin. The SWNT-CA infiltrated with a polymer resin is cured to produce the stiff and electrically conductive composite of carbon nanotube aerogel and polymer.

  10. Polymer Composites Corrosive Degradation: A Computational Simulation

    Science.gov (United States)

    Chamis, Christos C.; Minnetyan, Levon

    2007-01-01

    A computational simulation of polymer composites corrosive durability is presented. The corrosive environment is assumed to manage the polymer composite degradation on a ply-by-ply basis. The degradation is correlated with a measured pH factor and is represented by voids, temperature and moisture which vary parabolically for voids and linearly for temperature and moisture through the laminate thickness. The simulation is performed by a computational composite mechanics computer code which includes micro, macro, combined stress failure and laminate theories. This accounts for starting the simulation from constitutive material properties and up to the laminate scale which exposes the laminate to the corrosive environment. Results obtained for one laminate indicate that the ply-by-ply degradation degrades the laminate to the last one or the last several plies. Results also demonstrate that the simulation is applicable to other polymer composite systems as well.

  11. Preparation of Conductive Polymer Graphite (PG) Composites

    Science.gov (United States)

    Munirah Abdullah, Nur; Saddam Kamarudin, M.; Rus, Anika Zafiah M.; Abdullah, M. F. L.

    2017-08-01

    The preparation of conductive polymer graphite (PG) composites thin film is described. The thickness of the PG composites due to slip casting method was set approximately ~0.1 mm. The optical microscope (OM) and fourier transform infra-red spectroscopy (FTIR) has been operated to distinguish the structure-property relationships scheme of PG composites. It shows that the graphite is homogenously dispersed in polymer matrix composites. The electrical characteristics of the PG composite were measured at room temperature and the electrical conductivity (σ) was discovered with respect of its resistivity (Ω). By achieving conductivity of 103 S/m, it is proven that at certain graphite weight loading (PG20, PG25 and PG30) attributes to electron pathway in PG composites.

  12. Nanoparticle-sulphur "inverse vulcanisation" polymer composites.

    Science.gov (United States)

    Bear, Joseph C; Peveler, William J; McNaughter, Paul D; Parkin, Ivan P; O'Brien, Paul; Dunnill, Charles W

    2015-07-04

    Composites of sulphur polymers with nanoparticles such as PbS, with tunable optical properties are reported. A hydrothermal route incorporating pre-formed nanoparticles was used, and their physical and chemical properties evaluated by transmission and scanning electron microscopy, thermogravimetric and elemental analyses. These polymers are easily synthesised from an industrial waste material, elemental sulphur, can be cast into virtually any form and as such represent a new class of materials designed for a responsible energy future.

  13. Hygrothermal modeling and testing of polymers and polymer matrix composites

    Science.gov (United States)

    Xu, Weiqun

    2000-10-01

    The dissertation, consisting of four papers, presents the results of the research investigation on environmental effects on polymers and polymer matrix composites. Hygrothermal models were developed that would allow characterization of non-Fickian diffusion coefficients from moisture weight gain data. Hygrothermal testing was also conducted to provide the necessary data for characterizing of model coefficients and model verification. In part 1, a methodology is proposed that would allow characterization of non-Fickian diffusion coefficients from moisture weight gain data for a polymer adhesive below its Tg. Subsequently, these diffusion coefficients are used for predicting moisture concentration profiles through the thickness of a polymer. In part 2, a modeling methodology based on irreversible thermodynamics applied within the framework of composite macro-mechanics is presented, that would allow characterization of non-Fickian diffusion coefficients from moisture weight gain data for laminated composites with distributed uniaxial damage. Comparisons with test data for a 5-harness satin textile composite with uniaxial micro-cracks are provided for model verifications. In part 3, the same modeling methodology based on irreversible thermodynamics is extended to the case of a bi-axially damaged laminate. The model allows characterization of nonFickian diffusion coefficients as well as moisture saturation level from moisture weight gain data for laminates with pre-existing damage. Comparisons with test data for a bi-axially damaged Graphite/Epoxy woven composite are provided for model verifications. Finally, in part 4, hygrothermal tests conducted on AS4/PR500 5HS textile composite laminates are summarized. The objectives of the hygrothermal tests are to determine the diffusivity and maximum moisture content of the laminate.

  14. Polymer Matrix Composites for Propulsion Systems

    Science.gov (United States)

    Nettles, Alan T.

    2003-01-01

    The Access-to-Space study identified the requirement for lightweight structures to achieve orbit with a single-stage vehicle. Thus a task was undertaken to examine the use of polymer matrix composites for propulsion components. It was determined that the effort of this task would be to extend previous efforts with polymer matrix composite feedlines and demonstrate the feasibility of manufacturing large diameter feedlines with a complex shape and integral flanges, (i.e. all one piece with a 90 deg bend), and assess their performance under a cryogenic atmosphere.

  15. Mechanochemically-Active Polymer Composites

    Science.gov (United States)

    2013-09-13

    Kelly M. Wiggins, Christopher W. Bielawski. A Mechanochemical Approach to Deracemization, Angewandte Chemie International Edition , (02 2012): 0. doi...design and study of mechanophores, Polymer International , (01 2013): 2. doi: 10.1002/pi.4350 08/28/2008 2.00 S.L. Potisek, D.A. Davis, N.R. Sottos, S.R...Proton-Coupled Mechanochemical Transduction – Mechanogenerating Acids” Fourth International Conference on Self-Healing Materials, Ghent, Belgium, Jun

  16. Superconductivity

    CERN Document Server

    Thomas, D B

    1974-01-01

    A short general review is presented of the progress made in applied superconductivity as a result of work performed in connection with the high-energy physics program in Europe. The phenomenon of superconductivity and properties of superconductors of Types I and II are outlined. The main body of the paper deals with the development of niobium-titanium superconducting magnets and of radio-frequency superconducting cavities and accelerating structures. Examples of applications in and for high-energy physics experiments are given, including the large superconducting magnet for the Big European Bubble Chamber, prototype synchrotron magnets for the Super Proton Synchrotron, superconducting d.c. beam line magnets, and superconducting RF cavities for use in various laboratories. (0 refs).

  17. Fatigue damage mechanisms in polymer matrix composites

    OpenAIRE

    1997-01-01

    Polymer matrix composites are finding increased use in structural applications, in particular for aerospace and automotive purposes. Mechanical fatigue is the most common type of failure of structures in service. The relative importance of fatigue has yet to be reflected in design where static conditions still prevail. The fatigue behavior of composite materials is conventionally characterized by a Wöhler or S-N curve. For every new material with a new lay-up, altered constituents or differen...

  18. Inorganic-whisker-reinforced polymer composites synthesis, properties and applications

    CERN Document Server

    Sun, Qiuju

    2015-01-01

    Inorganic-Whisker-Reinforced Polymer Composites: Synthesis, Properties and Applications gives a comprehensive presentation of inorganic microcrystalline fibers, or whiskers, a polymer composite filler. It covers whisker synthesis, surface modification, applications for reinforcing polymer-matrix composites, and analysis of resulting filled polymer composites. It focuses on calcium carbonate whiskers as a primary case study, introducing surface treatment methods for calcium carbonate whiskers and factors that influence them.Along with calcium carbonate, the book discusses potassium titanate and

  19. Piezoelectric Nanoparticle-Polymer Composite Materials

    Science.gov (United States)

    McCall, William Ray

    Herein we demonstrate that efficient piezoelectric nanoparticle-polymer composite materials can be synthesized and fabricated into complex microstructures using sugar-templating methods or optical printing techniques. Stretchable foams with excellent tunable piezoelectric properties are created by incorporating sugar grains directly into polydimethylsiloxane (PDMS) mixtures containing barium titanate (BaTiO3 -- BTO) nanoparticles and carbon nanotubes (CNTs), followed by removal of the sugar after polymer curing. Porosities and elasticity are tuned by simply adjusting the sugar/polymer mass ratio and the electrical performance of the foams showed a direct relationship between porosity and the piezoelectric outputs. User defined 2D and 3D optically printed piezoelectric microstructures are also fabricated by incorporating BTO nanoparticles into photoliable polymer solutions such as polyethylene glycol diacrylate (PEGDA) and exposing to digital optical masks that can be dynamically altered. Mechanical-to-electrical conversion efficiency of the optically printed composite is enhanced by chemically altering the surface of the BTO nanoparticles with acrylate groups which form direct covalent linkages with the polymer matrix under light exposure. Both of these novel materials should find exciting uses in a variety of applications including energy scavenging platforms, nano- and microelectromechanical systems (NEMS/MEMS), sensors, and acoustic actuators.

  20. Superconductivity

    Science.gov (United States)

    1989-07-01

    SUPERCONDUCTIVITY HIGH-POWER APPLICATIONS Electric power generation/transmission Energy storage Acoustic projectors Weapon launchers Catapult Ship propulsion • • • Stabilized...temperature superconductive shields could be substantially enhanced by use of high-Tc materials. 27 28 NRAC SUPERCONDUCTIVITY SHIP PROPULSION APPLICATIONS...motor shown in the photograph. As a next step in the evolution of electric-drive ship propulsion technology, DTRC has proposed to scale up the design

  1. Nano polypeptide particles reinforced polymer composite fibers.

    Science.gov (United States)

    Li, Jiashen; Li, Yi; Zhang, Jing; Li, Gang; Liu, Xuan; Li, Zhi; Liu, Xuqing; Han, Yanxia; Zhao, Zheng

    2015-02-25

    Because of the intensified competition of land resources for growing food and natural textile fibers, there is an urgent need to reuse and recycle the consumed/wasted natural fibers as regenerated green materials. Although polypeptide was extracted from wool by alkaline hydrolysis, the size of the polypeptide fragments could be reduced to nanoscale. The wool polypeptide particles were fragile and could be crushed down to nano size again and dispersed evenly among polymer matrix under melt extrusion condition. The nano polypeptide particles could reinforce antiultraviolet capability, moisture regain, and mechanical properties of the polymer-polypeptide composite fibers.

  2. Polymer compositions, polymer films and methods and precursors for forming same

    Science.gov (United States)

    Klaehn, John R; Peterson, Eric S; Orme, Christopher J

    2013-09-24

    Stable, high performance polymer compositions including polybenzimidazole (PBI) and a melamine-formaldehyde polymer, such as methylated, poly(melamine-co-formaldehyde), for forming structures such as films, fibers and bulky structures. The polymer compositions may be formed by combining polybenzimidazole with the melamine-formaldehyde polymer to form a precursor. The polybenzimidazole may be reacted and/or intertwined with the melamine-formaldehyde polymer to form the polymer composition. For example, a stable, free-standing film having a thickness of, for example, between about 5 .mu.m and about 30 .mu.m may be formed from the polymer composition. Such films may be used as gas separation membranes and may be submerged into water for extended periods without crazing and cracking. The polymer composition may also be used as a coating on substrates, such as metal and ceramics, or may be used for spinning fibers. Precursors for forming such polymer compositions are also disclosed.

  3. Piezoelectric Polymer/Ceramic Composite

    Science.gov (United States)

    1989-05-02

    significant. The current in ?iEZEL samole was cbserved to reach steady state level in the region cf -i05 sec whereas in t-he prepared composites the tine talen ... technology is not a’ silable for prodccinc s;ch materials in tOe areas and thicknesses required for commecrcial applications in c:apacitolrs. Y~i5.h~4 ’~ x

  4. Thermal conductivity and multiferroics of electroactive polymers and polymer composites

    Science.gov (United States)

    Jin, Jiezhu

    Electronically conducting polymers and electromechanical polymers are the two important branches of the cutting-edge electroactive polymers. They have shown significant impact on many modern technologies such as flat panel display, energy transport, energy conversion, sensors and actuators. To utilize conducting polymers in microelectronics, optoelectronics and thermoelectrics, it is necessary to have a comprehensive study of their thermal conductivity since thermal conductivity is a fundamental materials property that is particularly important and sometimes a determining factor of the device performance. For electromechanical polymers, larger piezoelectric effect will contribute to the improvement of magnetoelectric (ME) coupling efficiency in their multiferroic composites. This dissertation is devoted to characterizing electronically conducting polymers for their electrical and thermal conductivity, and developing new classes of electromechanical polymers and strain-mediated electromechanical polymer-based multiferroic ME composites. Conducting polymers opened up new possibilities for devices combining novel electrical and thermal properties, but there has been limited understanding of the length-scale effect of the electrical and thermal conductivity, and the mechanism underlying the electricity and heat transport behavior. In this dissertation, the analytical model and experimental technique are presented to measure the in-plane thermal conductivity of polyaniline thin films. For camphorsulfonic acid doped polyaniline patterned on silicon oxide/silicon substrate using photolithography and reactive ion etching, the thermal conductivity of the film with thickness of 20 nm is measured to be 0.0406 W/m˙K, which significantly deviates from their bulk (> 0.26 W/m˙K). The size effect on thermal conductivity at this scale is attributed to the significant phonon boundary scattering. When the film goes up to 130 nm thick, the thermal conductivity increases to 0.166 W

  5. Mechanical Properties of Polymer Nano-composites

    Science.gov (United States)

    Srivastava, Iti

    Thermoset polymer composites are increasingly important in high-performance engineering industries due to their light-weight and high specific strength, finding cutting-edge applications such as aircraft fuselage material and automobile parts. Epoxy is the most widely employed thermoset polymer, but is brittle due to extensive cross-linking and notch sensitivity, necessitating mechanical property studies especially fracture toughness and fatigue resistance, to ameliorate the low crack resistance. Towards this end, various nano and micro fillers have been used with epoxy to form composite materials. Particularly for nano-fillers, the 1-100 nm scale dimensions lead to fascinating mechanical properties, oftentimes proving superior to the epoxy matrix. The chemical nature, topology, mechanical properties and geometry of the nano-fillers have a profound influence on nano-composite behavior and hence are studied in the context of enhancing properties and understanding reinforcement mechanisms in polymer matrix nano-composites. Using carbon nanotubes (CNTs) as polymer filler, uniquely results in both increased stiffness as well as toughness, leading to extensive research on their applications. Though CNTs-polymer nano-composites offer better mechanical properties, at high stress amplitude their fatigue resistance is lost. In this work covalent functionalization of CNTs has been found to have a profound impact on mechanical properties of the CNT-epoxy nano-composite. Amine treated CNTs were found to give rise to effective fatigue resistance throughout the whole range of stress intensity factor, in addition to significantly enhancing fracture toughness, ductility, Young's modulus and average hardness of the nano-composite by factors of 57%, 60%, 30% and 45% respectively over the matrix as a result of diminished localized cross-linking. Graphene, a one-atom-thick sheet of atoms is a carbon allotrope, which has garnered significant attention of the scientific community and is

  6. Piezoelectric nanoparticle-polymer composite foams.

    Science.gov (United States)

    McCall, William R; Kim, Kanguk; Heath, Cory; La Pierre, Gina; Sirbuly, Donald J

    2014-11-26

    Piezoelectric polymer composite foams are synthesized using different sugar-templating strategies. By incorporating sugar grains directly into polydimethylsiloxane mixtures containing barium titanate nanoparticles and carbon nanotubes, followed by removal of the sugar after polymer curing, highly compliant materials with excellent piezoelectric properties can be fabricated. Porosities and elasticity are tuned by simply adjusting the sugar/polymer mass ratio which gave an upper bound on the porosity of 73% and a lower bound on the elastic coefficient of 32 kPa. The electrical performance of the foams showed a direct relationship between porosity and the piezoelectric outputs, giving piezoelectric coefficient values of ∼112 pC/N and a power output of ∼18 mW/cm3 under a load of 10 N for the highest porosity samples. These novel materials should find exciting use in a variety of applications including energy scavenging platforms, biosensors, and acoustic actuators.

  7. The radiation chemistry of polymer composites

    Science.gov (United States)

    Dole, Malcolm

    With the use of plastics in the construction of space satellites which may be exposed in geosynchronous orbit to 100 MGy (10,000 Mrad) of high-energy radiation in 30 years of use, the effect of these radiations on the polymer becomes of practical importance. To understand the effects we consider first various radiation-resistant groups that are incorporated into the polymer and their relative effectiveness in reducing molecular scissions due to the radiation. The location of such groups in the polymer is also discussed. Next the chemical structures of a number of resins such as epoxies, polyimides, etc. are described followed by a detailed account of methods of improving the radiation resistance of plastics by the incorporation of carbon or glass fibers. Finally, the role of oxygen in causing chain scissions and other effects during irradiation which reduce the mechanical strength of the plastics and the fiber resin composites are also considered.

  8. Preparation and characterization of organic polymer modified composite polyaluminum chloride

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Compared with traditional aluminum salts, polyaluminum chloride (PACl) has better coagulation-flocculation performance in turbidity removal. However, it is still inferior to organic polymers in terms of bridging function. In order to improve the aggregating property of PACl, different composite PACl flocculants were prepared with various organic polymers. The effect of organic polymer on the distribution of Al (Ⅲ) species in composite flocculants was studied using 27Al NMR and Al-ferron complexation methods. The charge neutralization and surface adsorption characteristics of composite flocculants were also investigated. Jar tests were conducted to evaluate the turbidity removal efficacy of organic polymer modified composite flocculants. The study shows that cationic polymer and anionic polymer have significant influences on the coagulation-flocculation behaviors of PACl. Both cationic and anionic polymers can improve the turbidity removal performance of PACl but the mechanisms are much different: cationic organic polymer mainly increases the charge neutralization ability, but anionic polymer mainly enhances the bridging function.

  9. Tunable electromagnetically induced transparency in a composite superconducting system

    Science.gov (United States)

    Wang, Xin; Li, Hong-rong; Chen, Dong-xu; Liu, Wen-xiao; Li, Fu-li

    2016-05-01

    We theoretically propose an efficient method to realize electromagnetically induced transparency (EIT) in the microwave regime through a coupled system consisting of a flux qubit and a superconducting LC resonator. Driven by two appropriate microwave fields, the system will be trapped in the dark states. In our proposal, the control field of EIT is played by a second-order transfer rather than by a direct strong-pump field. In particular, we obtained conditions for electromagnetically induced transparency and Autler-Townes splitting in this composite system. Both theoretical and numerical results show that this EIT system benefits from the relatively long coherent time of the resonator. Since this whole system is artificial and tunable, our scheme may have potential applications in various domains.

  10. Note on the cryostatic stability of superconducting composites

    Energy Technology Data Exchange (ETDEWEB)

    Gauster, W. F.

    1978-02-01

    A careful discussion is given of the ''equal area condition'' developed by Maddock et al. In order to make the essential points as clear as possible, analytical solutions are derived under simplifying assumptions (simple model for heat transfer by nucleate and film boiling liquid helium; constant heat conduction and specific heat) instead of using more realistic but less controllable computer calculations. A quantitative definition of the concept of a long wire is given. Numerical examples for the Maddock transition characterized by the equal area condition are given for a long superconducting composite with linear cooling and for a liquid helium-cooled resistance wire of finite length. In addition, cases are shown where instead of applying the equal area stability condition, time-dependent solutions should be considered.

  11. Spectroscopic Characterisation of SWNT Polymer Composites

    OpenAIRE

    Keogh, Sinead

    2006-01-01

    In this study hybrid systems of the conjugated organic polymer poly(p-phenylene vinylene-co-2,5-dioctyloxy-m-phenylene vinylene) (PmPV) with single-walled carbon nanotubes synthesised by the Arc discharge method and by gas-phase catalytic decomposition of carbon monoxide at high pressure (HiPco process) are explored using a wide variety of spectroscopic, microscopic and thermal techniques. Diameter dependent solubilisation has been previously shown in solutions of such composites. Firstly the...

  12. Fiber reinforced polymer composites for bridge structures

    Directory of Open Access Journals (Sweden)

    Alexandra CANTORIU

    2013-12-01

    Full Text Available Rapid advances in construction materials technology have led to the emergence of new materials with special properties, aiming at safety, economy and functionality of bridges structures. A class of structural materials which was originally developed many years ago, but recently caught the attention of engineers involved in the construction of bridges is fiber reinforced polymer composites. This paper provides an overview of fiber reinforced polymer composites used in bridge structures including types, properties, applications and future trends. The results of this study have revealed that this class of materials presents outstanding properties such as high specific strength, high fatigue and environmental resistance, lightweight, stiffness, magnetic transparency, highly cost-effective, and quick assembly, but in the same time high initial costs, lack of data on long-term field performance, low fire resistance. Fiber reinforced polymer composites were widely used in construction of different bridge structures such as: deck and tower, I-beams, tendons, cable stands and proved to be materials for future in this field.

  13. Smooth Nanowire/Polymer Composite Transparent Electrodes

    KAUST Repository

    Gaynor, Whitney

    2011-04-29

    Smooth composite transparent electrodes are fabricated via lamination of silver nanowires into the polymer poly-(4,3-ethylene dioxythiophene): poly(styrene-sulfonate) (PEDOT:PSS). The surface roughness is dramatically reduced compared to bare nanowires. High-efficiency P3HT:PCBM organic photovoltaic cells can be fabricated using these composites, reproducing the performance of cells on indium tin oxide (ITO) on glass and improving the performance of cells on ITO on plastic. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  14. Radiation-Shielding Polymer/Soil Composites

    Science.gov (United States)

    Sen, Subhayu

    2007-01-01

    It has been proposed to fabricate polymer/ soil composites primarily from extraterrestrial resources, using relatively low-energy processes, with the original intended application being that habitat structures constructed from such composites would have sufficient structural integrity and also provide adequate radiation shielding for humans and sensitive electronic equipment against the radiation environment on the Moon and Mars. The proposal is a response to the fact that it would be much less expensive to fabricate such structures in situ as opposed to transporting them from Earth.

  15. Solid particle erosion of polymers and composites

    Science.gov (United States)

    Friedrich, K.; Almajid, A. A.

    2014-05-01

    After a general introduction to the subject of solid particle erosion of polymers and composites, the presentation focusses more specifically on the behavior of unidirectional carbon fiber (CF) reinforced polyetheretherketone (PEEK) composites under such loadings, using different impact conditions and erodents. The data were analyzed on the basis of a newly defined specific erosive wear rate, allowing a better comparison of erosion data achieved under various testing conditions. Characteristic wear mechanisms of the CF/PEEK composites consisted of fiber fracture, matrix cutting and plastic matrix deformation, the relative contribution of which depended on the impingement angles and the CF orientation. The highest wear rates were measured for impingement angles between 45 and 60°. Using abrasion resistant neat polymer films (in this case PEEK or thermoplastic polyurethane (TPU) ones) on the surface of a harder substrate (e.g. a CF/PEEK composite plate) resulted in much lower specific erosive wear rates. The use of such polymeric films can be considered as a possible method to protect composite surfaces from damage caused by minor impacts and erosion. In fact, they are nowadays already successfully applied as protections for wind energy rotor blades.

  16. Conjugated polymer composite nanoparticles by rapid mixing.

    Science.gov (United States)

    Jung, Christoph; de Roo, Tjaard; Mecking, Stefan

    2014-12-01

    Composite nanoparticles from poly[(9,9-di-n-octylfluoren-2,7-diyl)-alt-(benzo[2,1,3]thiadiazol-4,8-diyl)] (F8BT) and poly(9,9-di-n-hexylfluoren-2,7-diyl) (PF) with embedded inorganic nanoparticles (TiO2 , CdSe, and CdSe/CdS) are prepared through kinetic trapping by rapid turbulent mixing in a multi-inlet vortex mixer without the need for polymer functionalization. High contents of inorganic materials up to 50-60 wt% are realized for all composites. The influence of flow ratios, sodium dodecyl sulfate (SDS) concentration, and absolute flow rates on the particle size and morphology is studied. High water-to-THF ratios and high total flow rates around 2 m s(-1) yield particle sizes below 50 nm. By adjusting these parameters, controlled particle sizes between 30 to several hundred nanometers are obtained. Composite particles from CdSe/CdS and F8BT or PF show a strong quenching of the polymer emission and near exclusive emission from the inorganic nanocrystal, which indicates an efficient energy transfer with fluorescence quantum yields of 23% for the F8BT/CdSe/CdS composites and 21% for the PF/CdSe/CdS composites. The dispersions are colloidally stable for several months.

  17. Microwave Measurements of Ferrite Polymer Composite Materials

    Directory of Open Access Journals (Sweden)

    Rastislav Dosoudil

    2004-01-01

    Full Text Available The article focuses on the microwave measurements performed on the nickel-zinc sintered ferrite with the chemical formula Ni0.3Zn0.7Fe2O4 produced by the ceramic technique and composite materials based on this ferrite and a non-magnetic polymer (polyvinyl chloride matrix. The prepared composite samples had the same particle size distribution 0-250um but different ferrite particle concentrations between 23 vol% and 80 vol%. The apparatus for measurement of the signal proportional to the absolute value of scattering parameter S11 (reflexion coefficient is described and the dependence of measured reflected signal on a bias magnetic field has been studied. By means of experiments, the resonances to be connected with the geometry of microwave experimental set-up were distinguished from ferromagnetic resonance arising in ferrite particles of composite structure. The role of local interaction fields of ferrite particles in composite material has been discussed.

  18. Durable polymer-aerogel based superhydrophobic coatings: a composite material

    Energy Technology Data Exchange (ETDEWEB)

    Kissel, David J.; Brinker, Charles Jeffrey

    2016-02-02

    Provided are polymer-aerogel composite coatings, devices and articles including polymer-aerogel composite coatings, and methods for preparing the polymer-aerogel composite. The exemplary article can include a surface, wherein the surface includes at least one region and a polymer-aerogel composite coating disposed over the at least one region, wherein the polymer-aerogel composite coating has a water contact angle of at least about 140.degree. and a contact angle hysteresis of less than about 1.degree.. The polymer-aerogel composite coating can include a polymer and an ultra high water content catalyzed polysilicate aerogel, the polysilicate aerogel including a three dimensional network of silica particles having surface functional groups derivatized with a silylating agent and a plurality of pores.

  19. Durable polymer-aerogel based superhydrophobic coatings, a composite material

    Science.gov (United States)

    Kissel, David J; Brinker, Charles Jeffrey

    2014-03-04

    Provided are polymer-aerogel composite coatings, devices and articles including polymer-aerogel composite coatings, and methods for preparing the polymer-aerogel composite. The exemplary article can include a surface, wherein the surface includes at least one region and a polymer-aerogel composite coating disposed over the at least one region, wherein the polymer-aerogel composite coating has a water contact angle of at least about 140.degree. and a contact angle hysteresis of less than about 1.degree.. The polymer-aerogel composite coating can include a polymer and an ultra high water content catalyzed polysilicate aerogel, the polysilicate aerogel including a three dimensional network of silica particles having surface functional groups derivatized with a silylating agent and a plurality of pores.

  20. Superconductivity

    CERN Document Server

    Ketterson, John B

    2008-01-01

    Conceived as the definitive reference in a classic and important field of modern physics, this extensive and comprehensive handbook systematically reviews the basic physics, theory and recent advances in the field of superconductivity. Leading researchers, including Nobel laureates, describe the state-of-the-art in conventional and unconventional superconductors at a particularly opportune time, as new experimental techniques and field-theoretical methods have emerged. In addition to full-coverage of novel materials and underlying mechanisms, the handbook reflects continued intense research into electron-phone based superconductivity. Considerable attention is devoted to high-Tc superconductivity, novel superconductivity, including triplet pairing in the ruthenates, novel superconductors, such as heavy-Fermion metals and organic materials, and also granular superconductors. What’s more, several contributions address superconductors with impurities and nanostructured superconductors. Important new results on...

  1. Molecular composites and polymer blends containing ionic polymers

    Science.gov (United States)

    Tsou, Li-Chun

    1997-11-01

    Polymer blends are generally immiscible due to the unfavorable thermodynamics of mixing. By the introduction of ion-dipole interaction, mechanical properties of the PPTA anion/polar polymers (such as PVP, PEO and PPrO) molecular composites have been investigated in relation to their miscibility and microstructural morphology. Optical clarity observed in the glassy PPTA anion/PVP system suggest the presence of miscibility, since the refractive indices between the two components are quite different, nsb{PVP} = 1.509 and nsb{PPTA} = 1.644. In general, the difference greater than 0.01 is sufficient to make blends opaque. DSC measurements, showing a composition dependent Tsb{g} and a melting temperature depression, also indicate the miscibility achieved at the molecular level, about 50-100 A. By using the Hoffman-Weeks plot, a negative Flory-Huggins interaction parameter, chi = -1.10, is obtained for the PPTA anion/PEO molecular composites. An irregular spherulitic pattern and a reduced crystal size suggest that PPTA anion is intimately mixed with the amorphous PEO, both inter- and intra-spherulitically. Molecular composites exhibit not only an enhanced tensile strength and modulus, but also a greater fracture toughness, Ksb{IC}, e.g., an 80% increase at a 2 wt% PPTA anion addition. An enhanced tensile strength associated with a reduced crystallinity suggests that PPTA anion is the major contributor to the superior tensile properties instead of the crystalline phase. Upon addition of PPTA anion to PPrO, a slower relaxation rate and a better thermal stability are observed. Significant enhancement is found when the monovalent K salt is replaced with a divalent Ca salt. The molecular reinforcement achieved via ion-dipole interactions is more effective than the rigid filler effect obtained in the non-ionic PPTA/PPrO blend: e.g., a modulus enhancement of 814% vs. 286%, as compared with the value for PPrO. Two phase systems with microphase separation are developed since many

  2. Polymer composites filled with powders as polymer graded materials

    Directory of Open Access Journals (Sweden)

    J. Stabik

    2010-11-01

    Full Text Available Purpose: The goal of this paper is to present general overview of research results on Polymeric Gradient Materials (PGMs performed in Division of Metallic and Polymeric Materials Processing of Silesian University of Technology. Achievements in research on production technologies, compositions and properties are presented.Design/methodology/approach: Two basic technologies that were used for preparing polymeric gradient composites filled with powders are presented (centrifugal and gravity casting. Composites based on epoxy resin and filled with iron, ferrite, graphite, coal powders are characterized. Among other, the following properties were tested: surface resistivity, coefficient of friction, magnetic induction, filler particles distribution in polymeric matrix and others.Findings: Casting methods presented in this article can successfully be used to produce polymer composites characterized by gradual distribution of powder content and by this way by gradual distribution of properties. Results show that it is possible not only to achieve but also in some extend to control gradient of filler concentration. Especially in centrifugal casting is possible to influence gradient of filler concentration and in this way gradient of many properties.Research limitations/implications: The main problem in presented researches was to introduce higher quantities of filler. The side effect of high filler content was high viscosity. Filler particles were added to the epoxy matrix in range from 3vol.% to 50vol.% depending on filler properties, method of casting etc.Practical implications: Elaborated PGMs may be applied in many fields such as medicine, electronics, mining industry, machine building industry and many others.Originality/value: New type of polymeric gradient composites were achieved using centrifugal and gravity casting technique. Influence of casting parameters, concentration and type of filler on composites properties was researched.

  3. The analysis of thermoplastic characteristics of special polymer sulfur composite

    Science.gov (United States)

    Książek, Mariusz

    2017-01-01

    Specific chemical environments step out in the industry objects. Portland cement composites (concrete and mortar) were impregnated by using the special polymerized sulfur and technical soot as a filler (polymer sulfur composite). Sulfur and technical soot was applied as the industrial waste. Portland cement composites were made of the same aggregate, cement and water. The process of special polymer sulfur composite applied as the industrial waste is a thermal treatment process in the temperature of about 150-155°C. The result of such treatment is special polymer sulfur composite in a liquid state. This paper presents the plastic constants and coefficients of thermal expansion of special polymer sulfur composites, with isotropic porous matrix, reinforced by disoriented ellipsoidal inclusions with orthotropic symmetry of the thermoplastic properties. The investigations are based on the stochastic differential equations of solid mechanics. A model and algorithm for calculating the effective characteristics of special polymer sulfur composites are suggested. The effective thermoplastic characteristics of special polymer sulfur composites, with disoriented ellipsoidal inclusions, are calculated in two stages: First, the properties of materials with oriented inclusions are determined, and then effective constants of a composite with disoriented inclusions are determined on the basis of the Voigt or Rice scheme. A brief summary of new products related to special polymer sulfur composites is given as follows: Impregnation, repair, overlays and precast polymer concrete will be presented. Special polymer sulfur as polymer coating impregnation, which has received little attention in recent years, currently has some very interesting applications.

  4. The analysis of thermoplastic characteristics of special polymer sulfur composite

    Science.gov (United States)

    Książek, Mariusz

    2016-07-01

    Specific chemical environments step out in the industry objects. Portland cement composites (concrete and mortar) were impregnated by using the special polymerized sulfur and technical soot as a filler (polymer sulfur composite). Sulfur and technical soot was applied as the industrial waste. Portland cement composites were made of the same aggregate, cement and water. The process of special polymer sulfur composite applied as the industrial waste is a thermal treatment process in the temperature of about 150-155°C. The result of such treatment is special polymer sulfur composite in a liquid state. This paper presents the plastic constants and coefficients of thermal expansion of special polymer sulfur composites, with isotropic porous matrix, reinforced by disoriented ellipsoidal inclusions with orthotropic symmetry of the thermoplastic properties. The investigations are based on the stochastic differential equations of solid mechanics. A model and algorithm for calculating the effective characteristics of special polymer sulfur composites are suggested. The effective thermoplastic characteristics of special polymer sulfur composites, with disoriented ellipsoidal inclusions, are calculated in two stages: First, the properties of materials with oriented inclusions are determined, and then effective constants of a composite with disoriented inclusions are determined on the basis of the Voigt or Rice scheme. A brief summary of new products related to special polymer sulfur composites is given as follows: Impregnation, repair, overlays and precast polymer concrete will be presented. Special polymer sulfur as polymer coating impregnation, which has received little attention in recent years, currently has some very interesting applications.

  5. Ag nanoparticle/polymer composite barcode nanorods

    Institute of Scientific and Technical Information of China (English)

    Hongxu Chen[1; Tieqiang Wang[2; Huaizhong Shen[1; Wendong Liu[1; Shuli Wang[1; Kun Liu[1; Junhu Zhang[1; Bai Yang[1

    2015-01-01

    We demonstrate a facile method combining colloidal lithography, selective ion-exchange, and the in situ reduction of Ag ions (Ag+) for the fabrication of multi-segmented barcode nanorods. First, polymer multilayer films were prepared by spin-coating alternating thin films of polystyrene and polyacrylic acid (PAA), and then multi-segmented polymer nanorods were fabricated via reactive ion etching with colloidal masks. Second, Ag nanoparticles (Ag NPs) were incorporated into the PAA segments by an ion exchange and the in situ reduction of the Ag~. The selective incorporation of the Ag NPs permitted the modification of the specific bars of the nanorods. Lastly, the Ag NP/polymer composite nanorods were released from the substrate to form suspensions for further coding applications. By increasing the number of segments and changing the length of each segment in the nanorods, the coding capacity of nanorods was improved. More importantly, this method can easily realize the density tuning of Ag NPs in different segments of a single nanorod by varying the composition of the PAA segments. We believe that numerous other coded materials can also be obtained, which introduces new approaches for fabricating barcoded nanomaterials.

  6. Phase stability and dynamics of entangled polymer-nanoparticle composites.

    KAUST Repository

    Mangal, Rahul

    2015-06-05

    Nanoparticle-polymer composites, or polymer-nanoparticle composites (PNCs), exhibit unusual mechanical and dynamical features when the particle size approaches the random coil dimensions of the host polymer. Here, we harness favourable enthalpic interactions between particle-tethered and free, host polymer chains to create model PNCs, in which spherical nanoparticles are uniformly dispersed in high molecular weight entangled polymers. Investigation of the mechanical properties of these model PNCs reveals that the nanoparticles have profound effects on the host polymer motions on all timescales. On short timescales, nanoparticles slow-down local dynamics of the host polymer segments and lower the glass transition temperature. On intermediate timescales, where polymer chain motion is typically constrained by entanglements with surrounding molecules, nanoparticles provide additional constraints, which lead to an early onset of entangled polymer dynamics. Finally, on long timescales, nanoparticles produce an apparent speeding up of relaxation of their polymer host.

  7. Emerging Trends in Polymer Matrix Composites .

    Directory of Open Access Journals (Sweden)

    Vikas M. Nadkarni

    1993-10-01

    Full Text Available The performance characteristics of PMC products are determined by the microstructure developed during the processing of composite materials. The structure development in processing is the result of integration of process parameters and inherent material characteristics. The properties of PMCs can thus be manipulated through both changes in the materials composition and process conditions. The present article illustrates the scientific approach followed in engineering of matrix materials and optimization of the processing conditions with specific reference to case studies on toughening of thermosetting resins and structure development in injection molding of thermoplastic composites. A novel approach is demonstrated for toughening of unsaturated polyester resins that involves the use of reactive liquid polymers chemically bonded to the matrix. The use of processing science is demonstrated by the significant effect of the mold temperature on the crystallinity and properties of molded poly (phenylene sulfide, a high performance engineering thermoplastic. An interactive approach is proposed for specific product and applications development.

  8. Creep of plain weave polymer matrix composites

    Science.gov (United States)

    Gupta, Abhishek

    Polymer matrix composites are increasingly used in various industrial sectors to reduce structural weight and improve performance. Woven (also known as textile) composites are one class of polymer matrix composites with increasing market share mostly due to their lightweight, their flexibility to form into desired shape, their mechanical properties and toughness. Due to the viscoelasticity of the polymer matrix, time-dependent degradation in modulus (creep) and strength (creep rupture) are two of the major mechanical properties required by engineers to design a structure reliably when using these materials. Unfortunately, creep and creep rupture of woven composites have received little attention by the research community and thus, there is a dire need to generate additional knowledge and prediction models, given the increasing market share of woven composites in load bearing structural applications. Currently, available creep models are limited in scope and have not been validated for any loading orientation and time period beyond the experimental time window. In this thesis, an analytical creep model, namely the Modified Equivalent Laminate Model (MELM), was developed to predict tensile creep of plain weave composites for any orientation of the load with respect to the orientation of the fill and warp fibers, using creep of unidirectional composites. The ability of the model to predict creep for any orientation of the load is a "first" in this area. The model was validated using an extensive experimental involving the tensile creep of plain weave composites under varying loading orientation and service conditions. Plain weave epoxy (F263)/ carbon fiber (T300) composite, currently used in aerospace applications, was procured as fabrics from Hexcel Corporation. Creep tests were conducted under two loading conditions: on-axis loading (0°) and off-axis loading (45°). Constant load creep, in the temperature range of 80-240°C and stress range of 1-70% UTS of the

  9. Characterization of Hybrid CNT Polymer Matrix Composites

    Science.gov (United States)

    Grimsley, Brian W.; Cano, Roberto J.; Kinney, Megan C.; Pressley, James; Sauti, Godfrey; Czabaj, Michael W.; Kim, Jae-Woo; Siochi, Emilie J.

    2015-01-01

    Carbon nanotubes (CNTs) have been studied extensively since their discovery and demonstrated at the nanoscale superior mechanical, electrical and thermal properties in comparison to micro and macro scale properties of conventional engineering materials. This combination of properties suggests their potential to enhance multi-functionality of composites in regions of primary structures on aerospace vehicles where lightweight materials with improved thermal and electrical conductivity are desirable. In this study, hybrid multifunctional polymer matrix composites were fabricated by interleaving layers of CNT sheets into Hexcel® IM7/8552 prepreg, a well-characterized toughened epoxy carbon fiber reinforced polymer (CFRP) composite. The resin content of these interleaved CNT sheets, as well as ply stacking location were varied to determine the effects on the electrical, thermal, and mechanical performance of the composites. The direct-current electrical conductivity of the hybrid CNT composites was characterized by in-line and Montgomery four-probe methods. For [0](sub 20) laminates containing a single layer of CNT sheet between each ply of IM7/8552, in-plane electrical conductivity of the hybrid laminate increased significantly, while in-plane thermal conductivity increased only slightly in comparison to the control IM7/8552 laminates. Photo-microscopy and short beam shear (SBS) strength tests were used to characterize the consolidation quality of the fabricated laminates. Hybrid panels fabricated without any pretreatment of the CNT sheets resulted in a SBS strength reduction of 70 percent. Aligning the tubes and pre-infusing the CNT sheets with resin significantly improved the SBS strength of the hybrid composite To determine the cause of this performance reduction, Mode I and Mode II fracture toughness of the CNT sheet to CFRP interface was characterized by double cantilever beam (DCB) and end notch flexure (ENF) testing, respectively. Results are compared to the

  10. Synthesis and superconductivity of (Ag)x/CuTl-1223 composites

    Institute of Scientific and Technical Information of China (English)

    Abdul Jabbar; Irfan Qasim; M Mumtaz; K Nadeem

    2015-01-01

    Series of (Ag)x/(Cu0.5Tl0.5Ba2Ca2Cu3O10-δ) {(Ag)x/CuTl-1223} nano-superconductor composites were synthesized with different concentra-tions (i.e. x ¼ 0 ? 4.0 wt%) of silver (Ag) nanoparticles. Low anisotropic CuTl-1223 superconducting matrix was prepared by solid-state reaction and Ag nanoparticles were prepared by a sol–gel method separately. The required (Ag)x/CuTl-1223 composition was obtained by the inclusion of Ag nanoparticles in CuTl-1223 superconducting matrix. Structural, morphological, compositional and superconducting transport properties of these composites were investigated in detail by x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive x-rays (EDX) spectroscopy and four-point probe electrical resistivity (ρ) measurements. The inclusion of Ag nanoparticles enhanced the superconducting properties without affecting the tetragonal structure of the host CuTl-1223 matrix. The improvement in superconducting properties of (Ag)x/CuTl-1223 composites is most likely due to enhanced inter-grains coupling and increased superconducting volume fraction after the addition of metallic Ag nanoparticles at the inter-crystallite sites in the samples. The presence of Ag nanoparticles at the grain-boundaries may increase the number of flux pinning centers, which were present in the form of weak-links in the pure CuTl-1223 superconducting matrix.

  11. Superconductivity

    CERN Document Server

    Poole, Charles P; Creswick, Richard J; Prozorov, Ruslan

    2014-01-01

    Superconductivity, Third Edition is an encyclopedic treatment of all aspects of the subject, from classic materials to fullerenes. Emphasis is on balanced coverage, with a comprehensive reference list and significant graphics from all areas of the published literature. Widely used theoretical approaches are explained in detail. Topics of special interest include high temperature superconductors, spectroscopy, critical states, transport properties, and tunneling. This book covers the whole field of superconductivity from both the theoretical and the experimental point of view. This third edition features extensive revisions throughout, and new chapters on second critical field and iron based superconductors.

  12. Accelerated aging of polymer composite bridge materials

    Science.gov (United States)

    Carlson, Nancy M.; Blackwood, Larry G.; Torres, Lucinda L.; Rodriguez, Julio G.; Yoder, Timothy S.

    1999-05-01

    Accelerated aging research on samples of composite materials and candidate UV protective coatings is determining the effects of six environmental factors on material durability. Candidate fastener materials are being evaluated to determine corrosion rates and crevice corrosion effects at load-bearing joints. This work supports field testing of a 30-ft long, 18-ft wide polymer matrix composite (PMC) bridge at the Idaho National Engineering and Environmental Laboratory. Durability results and sensor data form test with live loads provide information required for determining the cost/benefit measures to use in life-cycle planning, determining a maintenance strategy, establishing applicable inspection techniques, and establishing guidelines, standards and acceptance criteria for PMC bridges for use in the transportation infrastructure.

  13. Accelerated Aging of Polymer Composite Bridge Materials

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, Nancy Margaret; Blackwood, Larry Gene; Torres, Lucinda Laine; Rodriguez, Julio Gallardo; Yoder, Timothy Scott

    1999-03-01

    Accelerated aging research on samples of composite material and candidate ultraviolet (UV) protective coatings is determining the effects of six environmental factors on material durability. Candidate fastener materials are being evaluated to determine corrosion rates and crevice corrosion effects at load-bearing joints. This work supports field testing of a 30-ft long, 18-ft wide polymer matrix composite (PMC) bridge at the Idaho National Engineering and Environmental Laboratory (INEEL). Durability results and sensor data from tests with live loads provide information required for determining the cost/benefit measures to use in life-cycle planning, determining a maintenance strategy, establishing applicable inspection techniques, and establishing guidelines, standards, and acceptance criteria for PMC bridges for use in the transportation infrastructure.

  14. Composite layers for barrier coatings on polymers

    Science.gov (United States)

    Brochhagen, Markus; Vorkoetter, Christoph; Boeke, Marc; Benedikt, Jan

    2016-09-01

    Amorphous hydrogenated carbon (a-C:H), amorphous hydrogenated silicon (a-Si:H), and SiO2 thin films are of high interest because they can serve as a gas barrier on polymers. To understand how the coating changes the overall barrier properties of the thin film-polymer system, optical, mechanical, and barrier properties have to be studied. One of the important characteristic of such coatings is their compressive stress, which has beneficial as well as unwanted effects. The stress can cause deformation of the bulk material or de-lamination of the film. The mechanical stability can be improved and it is possible to reduce cracking due to elongation, as the compressive stress can compensate externally applied tensile strain. Stress and mechanical properties of composite layers can be manipulated directly by embedding nanoparticles in an amorphous matrix film. Therefore nanoparticles and amorphous layers are investigated before they can be assembled in a composite layer. Growth rates as well as optical and mechanical properties are explored in this work. An inductively coupled plasma source was used for all amorphous layers and the silicon nanoparticles with diameter around 5 nm were produced in a capacitively coupled plasma reactor. This work is supported by DFG within SFB-TR87.

  15. Polymer composite coatings to protect parts of oil field equipment

    Energy Technology Data Exchange (ETDEWEB)

    Kislyy, P.S.; Alekseyenko, A.A.; Dzyadykevich, Yu.V.; Kalba, Ye.N.

    1983-01-01

    A study was made of the possibility of using polymer composite coating for protection from corrosion and wear of working wheels of oil pumping pumps. A study was made of the physicomechanical properties of the polymer matrix. Technology was developed for applying the coating based on a polymer matrix and refractory filler which was introduced at the UMN ''Druzhba.''

  16. Mechanical Evaluation of Polymer Composite Hip Protectors

    Directory of Open Access Journals (Sweden)

    Jose Daniel Diniz Melo

    2010-01-01

    Full Text Available Hip fractures often result in serious health implications, particularly in the geriatric population, and have been related to long-term morbidity and death. In most cases, these fractures are caused by impact loads in the area of the greater trochanter, which are produced in a fall. This work is aimed at developing hip protectors using composite materials and evaluating their effectiveness in preventing hip fractures under high impact energy (120 J. The hip protectors were developed with an inner layer of energy absorbing soft material and an outer rigid shell of fiberglass-reinforced polymer composite. According to the experimental results, all tested configurations proved to be effective at reducing the impact load to below the average fracture threshold of proximal femur. Furthermore, an addition of Ethylene Vinyl Acetate (EVA to the impacted area of the composite shell proved to be beneficial to increase impact strength of the hip protectors. Thus, composite hip protectors proved to be a viable alternative for a mechanically efficient and cost-effective solution to prevent hip fractures.

  17. Polymer composite principles applied to hair styling gels.

    Science.gov (United States)

    Wade Rafferty, Denise; Zellia, Joseph; Hasman, Daniel; Mullay, John

    2008-01-01

    A novel approach is taken to understand the mechanical performance of fixative-treated hair tresses. Polymer composite principles are applied to explain the performance. Examples are given for polyacrylate-2 crosspolymer that show that the choice of neutralizer affects the film properties of anionic acrylic polymers by plasticization or by hardening through ionic (physical) crosslinking. The effect of these changes in the polymer film on the composite properties was determined by mechanical stiffness and high-humidity curl retention testing. It is shown that both adhesion to the hair and polymer cohesion are important in determining fixative polymer performance. The implications of the results for the formulation of fixative systems are discussed.

  18. Metal-polymer composites comprising nanostructures and applications thereof

    Science.gov (United States)

    Wang, Hsing-Lin; Jeon, Sea Ho; Mack, Nathan H.

    2011-08-02

    Metal-polymer composites, and methods of making and use thereof, said composites comprising a thermally-cured dense polyaniline substrate; an acid dopant; and, metal nanostructure deposits wherein the deposits have a morphology dependent upon the acid dopant.

  19. Polymer-nanoinorganic particles composite membranes: a brief overview

    Institute of Scientific and Technical Information of China (English)

    Zhenliang XU; Liyun YU; Lingfeng HAN

    2009-01-01

    Polymer-nanoinorganic particles composite membranes present an interesting approach for improving the physical and chemical, as well as separation properties of polymer membranes, because they possess character-istics of both organic and inorganic membranes such as good permeability, selectivity, mechanical strength, ther-mal stability and so on. The preparations and structures of polymer-nanoinorganic particles composite membranes and their unique properties are reviewed.

  20. Shock wave profiles in polymer matrix composite

    Science.gov (United States)

    Boteler, J. Michael; Rajendran, A. M.; Grove, David

    2000-04-01

    The promise of lightweight armor which is also structurally robust is of particular importance to the Army for future combat vehicles. Fiber reinforced organic matrix composites such as Polymer Matrix Composite (PMC) are being considered for this purpose due to their lower density and promising dynamic response. The work discussed here extends the prior work of Boteler who studied the delamination strength of PMC and Dandekar and Beaulieu who investigated the compressive and tensile strengths of PMC. In a series of shock wave experiments, the wave profile was examined as a function of propagation distance in PMC. Uniaxial strain was achieved by symmetric plate impact in the ARL 102 mm bore single-stage light gas gun. Embedded polyvinylidene flouride (PVDF) stress-rate gauges provided a stress history at three unique locations in the PMC and particle velocity history was recorded with VISAR. All stress data was compared to a Lagrangian hydrocode (EPIC) employing a model to describe the viscoelastic response of the composite material in one-dimension. The experimental stress histories displayed attenuation and loading properties in good agreement with model predictions. However, the unloading was observed to be markedly different than the hydrocode simulations. These results are discussed.

  1. Superconductivity of composite particles in a two-channel Kondo lattice.

    Science.gov (United States)

    Hoshino, Shintaro; Kuramoto, Yoshio

    2014-04-25

    Emergence of odd-frequency s-wave superconductivity is demonstrated in the two-channel Kondo lattice by means of the dynamical mean-field theory combined with the continuous-time quantum Monte Carlo method. Around half filling of the conduction bands, divergence of an odd-frequency pairing susceptibility is found, which signals instability toward the superconductivity. The corresponding order parameter is equivalent to a staggered composite-pair amplitude with even frequencies, which involves both localized spins and conduction electrons. A model wave function is constructed for the composite order with the use of symmetry operations such as charge conjugation and channel rotations. Given a certain asymmetry of the conduction bands, another s-wave superconductivity is found that has a uniform order parameter. The Kondo effect in the presence of two channels is essential for both types of unconventional superconductivity.

  2. Advanced composite polymer electrolyte fuel cell membranes

    Energy Technology Data Exchange (ETDEWEB)

    Wilson, M.S.; Zawodzinski, T.A.; Gottesfeld, S.; Kolde, J.A.; Bahar, B.

    1995-09-01

    A new type of reinforced composite perfluorinated polymer electrolyte membrane, GORE-SELECT{trademark} (W.L. Gore & Assoc.), is characterized and tested for fuel cell applications. Very thin membranes (5-20 {mu}m thick) are available. The combination of reinforcement and thinness provides high membrane, conductances (80 S/cm{sup 2} for a 12 {mu}m thick membrane at 25{degrees}C) and improved water distribution in the operating fuel cell without sacrificing longevity or durability. In contrast to nonreinforced perfluorinated membranes, the x-y dimensions of the GORE-SELECT membranes are relatively unaffected by the hydration state. This feature may be important from the viewpoints of membrane/electrode interface stability and fuel cell manufacturability.

  3. Multilayer Electroactive Polymer Composite Material Comprising Carbon Nanotubes

    Science.gov (United States)

    Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

    2009-01-01

    An electroactive material comprises multiple layers of electroactive composite with each layer having unique dielectric, electrical and mechanical properties that define an electromechanical operation thereof when affected by an external stimulus. For example, each layer can be (i) a 2-phase composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation, or (ii) a 3-phase composite having the elements of the 2-phase composite and further including a third component of micro-sized to nano-sized particles of an electroactive ceramic incorporated in the polymer matrix.

  4. Polymer Matrix Composite Lines and Ducts

    Science.gov (United States)

    Nettles, A. T.

    2001-01-01

    Since composite laminates are beginning to be identified for use in reusable launch vehicle propulsion systems, a task was undertaken to assess the feasibility of making cryogenic feedlines with integral flanges from polymer matrix composite materials. An additional level of complexity was added by having the feedlines be elbow shaped. Four materials, each with a unique manufacturing method, were chosen for this program. Feedlines were to be made by hand layup (HLU) with standard autoclave cure, HLU with electron beam cure, solvent-assisted resin transfer molding (SARTM), and thermoplastic tape laying (TTL). A test matrix of fill and drain cycles with both liquid nitrogen and liquid helium, along with a heat up to 250 F, was planned for each of the feedlines. A pressurization to failure was performed on any feedlines that passed the cryogenic cycling testing. A damage tolerance subtask was also undertaken in this study. The effects of foreign object impact to the materials used was assessed by cross-sectional examination and by permeability after impact testing. At the end of the program, the manufacture of the electron beam-cured feedlines never came to fruition. All of the TTL feedlines leaked heavily before any cryogenic testing, all of the SARTM feedlines leaked heavily after one cryogenic cycle. Thus, only the HLU with autoclave cure feedlines underwent the complete test matrix. They passed the cyclic testing and were pressurized to failure.

  5. Polymer Composites Reinforced by Nanotubes as Scaffolds for Tissue Engineering

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2014-01-01

    Full Text Available The interest in polymer based composites for tissue engineering applications has been increasing in recent years. Nanotubes materials, including carbon nanotubes (CNTs and noncarbonic nanotubes, with unique electrical, mechanical, and surface properties, such as high aspect ratio, have long been recognized as effective reinforced materials for enhancing the mechanical properties of polymer matrix. This review paper is an attempt to present a coherent yet concise review on the mechanical and biocompatibility properties of CNTs and noncarbonic nanotubes/polymer composites, such as Boron nitride nanotubes (BNNTs and Tungsten disulfide nanotubes (WSNTs reinforced polymer composites which are used as scaffolds for tissue engineering. We also introduced different preparation methods of CNTs/polymer composites, such as in situ polymerization, solution mixing, melt blending, and latex technology, each of them has its own advantages.

  6. High strain magnetostriction in a ferromagnet-polymer composite

    Science.gov (United States)

    Hamann, Aaron; Dahlberg, E. Dan

    2017-02-01

    A magnetostrictive composite material exhibiting the capacity for large magnetostrictive strains was created by suspending magnetic wires in a soft polymer matrix. Magnetostrictive strains as large as 20% were found in an applied field of 600 Oe for this proof of concept composite. Our analysis indicates that reversible strains of over 6% are reasonable for this specific composite. The large values of magnetostriction are due to the mechanical rotation of the wires in the polymer matrix.

  7. Carbon nanotube-polymer composites manufacture, properties, and applications

    CERN Document Server

    Grady, Brian P

    2011-01-01

    The accessible compendium of polymers in carbon nanotubes (CNTs) Carbon nanotubes (CNTs)-extremely thin tubes only a few nanometers in diameter but able to attain lengths thousands of times greater-are prime candidates for use in the development of polymer composite materials. Bringing together thousands of disparate research works, Carbon Nanotube-Polymer Composites: Manufacture, Properties, and Applications covers CNT-polymers from synthesis to potential applications, presenting the basic science and engineering of this dynamic and complex area in an accessible, readable way. Desi

  8. Entropy dominated behaviors of confined polymer-nanoparticle composites

    Institute of Scientific and Technical Information of China (English)

    Cao Xue-Zheng; Merlitz Holger; Sommer Jens-Uwe; Wu Chen-Xu

    2012-01-01

    Stretched polymers will lose their possible configurations if they are mixed with nanoparticles or touch a hard wall,which leads to a strong depletion attraction responsible for the enrichment of nanoparticles near substrates.Moreover,it is found that there exists a sacrifice mechanism in confined pure polymer samples or polymer-nanoparticle mixtures,that part of the polymers,in order to reach a minimum free energy for the total system,are adsorbed on hard walls even though they lose their conformation.The current study provides a simple yet effective approach for the design of thin polymer composites.

  9. Solid polymer electrolyte composite membrane comprising laser micromachined porous support

    Science.gov (United States)

    Liu, Han [Waltham, MA; LaConti, Anthony B [Lynnfield, MA; Mittelsteadt, Cortney K [Natick, MA; McCallum, Thomas J [Ashland, MA

    2011-01-11

    A solid polymer electrolyte composite membrane and method of manufacturing the same. According to one embodiment, the composite membrane comprises a rigid, non-electrically-conducting support, the support preferably being a sheet of polyimide having a thickness of about 7.5 to 15 microns. The support has a plurality of cylindrical pores extending perpendicularly between opposing top and bottom surfaces of the support. The pores, which preferably have a diameter of about 5 microns, are made by laser micromachining and preferably are arranged in a defined pattern, for example, with fewer pores located in areas of high membrane stress and more pores located in areas of low membrane stress. The pores are filled with a first solid polymer electrolyte, such as a perfluorosulfonic acid (PFSA) polymer. A second solid polymer electrolyte, which may be the same as or different than the first solid polymer electrolyte, may be deposited over the top and/or bottom of the first solid polymer electrolyte.

  10. Polymer blend compositions and methods of preparation

    Science.gov (United States)

    Naskar, Amit K.

    2016-09-27

    A polymer blend material comprising: (i) a first polymer containing hydrogen bond donating groups having at least one hydrogen atom bound to a heteroatom selected from oxygen, nitrogen, and sulfur, or an anionic version of said first polymer wherein at least a portion of hydrogen atoms bound to a heteroatom is absent and replaced with at least one electron pair; (ii) a second polymer containing hydrogen bond accepting groups selected from nitrile, halogen, and ether functional groups; and (iii) at least one modifying agent selected from carbon particles, ether-containing polymers, and Lewis acid compounds; wherein, if said second polymer contains ether functional groups, then said at least one modifying agent is selected from carbon particles and Lewis acid compounds. Methods for producing the polymer blend, molded forms thereof, and articles thereof, are also described.

  11. Thermal Degradation of Lead Monoxide Filled Polymer Composite Radiation Shields

    Science.gov (United States)

    Harish, V.; Nagaiah, N.

    2011-07-01

    Lead monoxide filled Isophthalate resin particulate polymer composites were prepared with different filler concentrations and investigated for physical, thermal, mechanical and gamma radiation shielding characteristics. This paper discusses about the thermo gravimetric analysis of the composites done to understand their thermal properties especially the effect of filler concentration on the thermal stability & degradation rate of composites. Pristine polymer exhibits single stage degradation whereas filled composites exhibit two stage degradation processes. Further, the IDT values as well as degradation rates decrease with the increased filler content in the composite.

  12. Recent developments in polyurethane-based conducting polymer composites

    OpenAIRE

    Njuguna, James A. K.; Pielichowski, Krzysztof

    2004-01-01

    Polyurethane-based conducting composites with polyaniline, polythiophene or polypyrrole are in the class of modern macromolecular materials that combine the toughness and elasticity of polyurethane matrix with conductivity of intrinsically conducting polymers. Since the methods of preparation strongly influence the structure and properties of resulting composite/blend, this works aim at systematic description of polyurethane based conducting composites. This review has been ...

  13. Monolithic and assembled polymer-ceramic composites for bone regeneration

    NARCIS (Netherlands)

    Nandakumar, A.; Cruz, C.; Mentink-Leusink, Anouk; Tahmasebi Birgani, Zeinab; Moroni, Lorenzo; van Blitterswijk, Clemens; Habibovic, Pamela

    2013-01-01

    The rationale for the use of polymer - ceramic composites for bone regeneration stems from the natural composition of bone, with collagen type I and biological apatite as main organic and inorganic constituents, respectively. In the present study, composite materials of PolyActive™ (PA), a poly

  14. Aromatic/aliphatic diamine derivatives for advanced compositions and polymers

    Science.gov (United States)

    Delozier, Donovan M. (Inventor); Watson, Kent A. (Inventor); Connell, John W. (Inventor); Smith, Jr., Joseph G. (Inventor)

    2010-01-01

    Novel compositions of matter comprise certain derivatives of 9,9-dialkyl fluorene diamine (AFDA). The resultant compositions, whether compositions of matter or monomers that are subsequently incorporated into a polymer, are unique and useful in a variety of applications. Useful applications of AFDA-based material include heavy ion radiation shielding components and components of optical and electronic devices.

  15. Flows in polymers, reinforced polymers and composites a multi-scale approach

    CERN Document Server

    Binetruy, Christophe; Keunings, Roland

    2015-01-01

    This book gives a detailed and practical introduction to complex flows of polymers and reinforced polymers as well as the flow of simple fluids in complex microstructures. Over the last decades, an increasing number of functional and structural parts, made so far with metals, has been progressively reengineered by replacing metallic materials by polymers, reinforced polymers and composites. The motivation for this substitution may be the weight reduction, the simpler, cheaper or faster forming process, or the ability to exploit additional functionalities. The present Brief surveys modern developments related to the multi-scale modeling and simulation of polymers, reinforced polymers, that involve a flowing microstructure and continuous fiber-reinforced composites, wherein the fluid flows inside a nearly stationary multi-scale microstructure. These developments concern both multi-scale modeling, defining bridges between the micro and macro scales - with special emphasis on the mesoscopic scale at which kinetic...

  16. Electromagnetic shielding of polymer-matrix composites with metallic nanoparticles

    National Research Council Canada - National Science Library

    Jalali, M; Dauterstedt, S; Michaud, A; Wuthrich, R

    2011-01-01

    To improve electromagnetic (EM) shielding and especially absorption of carbon fibre reinforced polymer-matrix composites for aircraft applications in high frequencies, the inclusion of metallic nanoparticles of iron, cobalt, nickel...

  17. Barium titanate-polymer composites produced via directional freezing.

    Science.gov (United States)

    Gorzkowski, Edward P; Pan, Ming-Jen

    2009-08-01

    In this study, we use a freeze casting technique to construct ceramic-polymer composites in which the 2 phases are arranged in an electrically parallel configuration. By doing so, the composites exhibit dielectric constant (K) up to 2 orders of magnitude higher than that of composites with ceramic particles randomly dispersed in a polymer matrix. In this technique, an aqueous ceramic slurry was frozen unidirectionally to form ice platelets and ceramic aggregates that were aligned in the temperature gradient direction. Upon freeze-drying, the ice platelets sublimed and left the lamellar ceramic structure intact. The green ceramic body was fired to retain the microstructure, and then the space between ceramic lamellae was infiltrated with a polymer material. The finished composites exhibit the high dielectric constant (1000) of ferroelectric ceramics while maintaining the unique properties of polymer materials such as graceful failure, low dielectric loss, and high dielectric breakdown.

  18. Ultra-Low-Density (ULD) Polymer Matrix Composites (PMCs) Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This NASA Phase I SBIR proposal seeks to demonstrate a new class of ultra-low-density (ULD) polymer matrix composites of high specific modulus and specific strength...

  19. Rate Dependent Deformation and Strength Analysis of Polymer Matrix Composites

    Science.gov (United States)

    Goldberg, Robert K.; Stouffer, Donald C.

    1999-01-01

    A research program is being undertaken to develop rate dependent deformation and failure models for the analysis of polymer matrix composite materials. In previous work in this program, strain-rate dependent inelastic constitutive equations used to analyze polymers have been implemented into a mechanics of materials based composite micromechanics method. In the current work, modifications to the micromechanics model have been implemented to improve the calculation of the effective inelastic strain. Additionally, modifications to the polymer constitutive model are discussed in which pressure dependence is incorporated into the equations in order to improve the calculation of constituent and composite shear stresses. The Hashin failure criterion is implemented into the analysis method to allow for the calculation of ply level failure stresses. The deformation response and failure stresses for two representative uniaxial polymer matrix composites, IM7/977-2 and AS4-PEEK, are predicted for varying strain rates and fiber orientations. The predicted results compare favorably to experimentally obtained values.

  20. Superconducting characteristics of 4-Å carbon nanotube-zeolite composite

    KAUST Repository

    Lortz, Rolf W.

    2009-04-15

    We have fabricated nanocomposites consisting of 4-A carbon nanotubes embedded in the 0.7-nm pores of aluminophosphate- five (AFI) zeolite that display a superconducting specific heat transition at 15 K. MicroRaman spectra of the samples show strong and spatially uniform radial breathing mode (RBM) signals at 510 cm-1 and 550 cm-1, characteristic of the (4,2) and (5,0) nanotubes, respectively. The specific heat transition is suppressed at >2T, with a temperature dependence characteristic of finite-size effects. Comparison with theory shows the behavior to be consistent with that of a type II BCS superconductor, characterized by a coherence length of 14 ± 2 nm and a magnetic penetration length of 1.5 ± 0.7 μm. Four probe and differential resistance measurements have also indicated a superconducting transition initiating at 15 K, but the magnetoresistance data indicate the superconducting network to be inhomogeneous, with a component being susceptible to magnetic fields below 3 T and other parts capable of withstanding a magnetic field of 5Tor beyond.

  1. Carbon Nanotube-Conducting Polymer Composites Based Solar Cells

    Institute of Scientific and Technical Information of China (English)

    Prakash; R.Somani; M.Umeno

    2007-01-01

    1 Results Combination of carbon nanotubes (CN) with polymers is important for application towards value added composites,solar cells,fuel cells etc.Especially interesting is the combination of CN with π-conjugated polymers because of the potential interaction between the highly delocalized π-electrons of the CN and the π-electrons correlated with the lattice of polymer skeleton.Efficient exciton dissociation due to electron transfer from the photoexcited polymer to CN is of interest for photovoltaic app...

  2. Nuclear alkylated pyridine aldehyde polymers and conductive compositions thereof

    Science.gov (United States)

    Rembaum, A.; Singer, S. (Inventor)

    1970-01-01

    A thermally stable, relatively conductive polymer was disclosed. The polymer was synthesized by condensing in the presence of catalyst a 2, 4, or 6 nuclear alklylated 2, 3, or 4 pyridine aldehyde or quaternary derivatives thereof to form a polymer. The pyridine groups were liked by olefinic groups between 2-4, 2-6, 2-3, 3-4, 3-6 or 4-6 positions. Conductive compositions were prepared by dissolving the quaternary polymer and an organic charge transfer complexing agent such as TCNQ in a mutual solvent such as methanol.

  3. Nanomechanics of cellulose crystals and cellulose-based polymer composites

    Science.gov (United States)

    Pakzad, Anahita

    Cellulose-polymer composites have potential applications in aerospace and transportation areas where lightweight materials with high mechanical properties are needed. In addition, these economical and biodegradable composites have been shown to be useful as polymer electrolytes, packaging structures, optoelectronic devices, and medical implants such as wound dressing and bone scaffolds. In spite of the above mentioned advantages and potential applications, due to the difficulties associated with synthesis and processing techniques, application of cellulose crystals (micro and nano sized) for preparation of new composite systems is limited. Cellulose is hydrophilic and polar as opposed to most of common thermoplastics, which are non-polar. This results in complications in addition of cellulose crystals to polymer matrices, and as a result in achieving sufficient dispersion levels, which directly affects the mechanical properties of the composites. As in other composite materials, the properties of cellulose-polymer composites depend on the volume fraction and the properties of individual phases (the reinforcement and the polymer matrix), the dispersion quality of the reinforcement through the matrix and the interaction between CNCs themselves and CNC and the matrix (interphase). In order to develop economical cellulose-polymer composites with superior qualities, the properties of individual cellulose crystals, as well as the effect of dispersion of reinforcements and the interphase on the properties of the final composites should be understood. In this research, the mechanical properties of CNC polymer composites were characterized at the macro and nano scales. A direct correlation was made between: - Dispersion quality and macro-mechanical properties - Nanomechanical properties at the surface and tensile properties - CNC diameter and interphase thickness. Lastly, individual CNCs from different sources were characterized and for the first time size-scale effect on

  4. Perspective of laser-prototyping nanoparticle-polymer composites

    Science.gov (United States)

    Zhang, Dongshi; Gökce, Bilal

    2017-01-01

    Nanoparticle synthesis by laser ablation in liquids has attracted attention from researchers worldwide the past few years and the integration of these nanoparticles in functional materials such as nanoparticle-polymer composites, represents a natural next step. Such "nanointegration" into polymers can be achieved by the ex situ dispersion of laser-synthesized inorganic nanoparticles in polymer matrices and the in situ encapsulation/grafting of nanoparticles with polymers/monomers during synthesis. Because the nanoparticle shell and the polymer matrix may be identical, this method often does not require the use of dispersants or matrix binders and constitutes a new avenue for direct particle-polymer coupling. In this perspective review, we summarize the methodologies for in situ and ex situ laser prototyping of nanoparticle-polymer composites (LaNPC) and downstream bulk-processing techniques. The determinants of polymer-solvent-laser parametrization for aimed physical and chemical properties of the composites are discussed. By highlighting representative works related to a variety of promising applications, the advantageous features of this technique are demonstrated. Finally, the challenges and prospects of LaNPC are outlined and a perspective is given regarding how the recent research findings reviewed changed the research direction in the field.

  5. Tethered Nanoparticle–Polymer Composites: Phase Stability and Curvature

    KAUST Repository

    Srivastava, Samanvaya

    2012-04-17

    Phase behavior of poly(ethylene glycol) (PEG) tethered silica nanoparticles dispersed in PEG hosts is investigated using small-angle X-ray scattering. Phase separation in dispersions of densely grafted nanoparticles is found to display strikingly different small-angle X-ray scattering signatures in comparison to phase-separated composites comprised of bare or sparsely grafted nanoparticles. A general diagram for the dispersion state and phase stability of polymer tethered nanoparticle-polymer composites incorporating results from this as well as various other contemporary studies is presented. We show that in the range of moderate to high grafting densities the dispersion state of nanoparticles in composites is largely insensitive to the grafting density of the tethered chains and chemistry of the polymer host. Instead, the ratio of the particle diameter to the size of the tethered chain and the ratio of the molecular weights of the host and tethered polymer chains (P/N) are shown to play a dominant role. Additionally, we find that well-functionalized nanoparticles form stable dispersions in their polymer host beyond the P/N limit that demarcates the wetting/dewetting transition in polymer brushes on flat substrates interacting with polymer melts. A general strategy for achieving uniform nanoparticle dispersion in polymers is proposed. © 2012 American Chemical Society.

  6. 3D Printing of Biocompatible Supramolecular Polymers and their Composites.

    Science.gov (United States)

    Hart, Lewis R; Li, Siwei; Sturgess, Craig; Wildman, Ricky; Jones, Julian R; Hayes, Wayne

    2016-02-10

    A series of polymers capable of self-assembling into infinite networks via supramolecular interactions have been designed, synthesized, and characterized for use in 3D printing applications. The biocompatible polymers and their composites with silica nanoparticles were successfully utilized to deposit both simple cubic structures, as well as a more complex twisted pyramidal feature. The polymers were found to be not toxic to a chondrogenic cell line, according to ISO 10993-5 and 10993-12 standard tests and the cells attached to the supramolecular polymers as demonstrated by confocal microscopy. Silica nanoparticles were then dispersed within the polymer matrix, yielding a composite material which was optimized for inkjet printing. The hybrid material showed promise in preliminary tests to facilitate the 3D deposition of a more complex structure.

  7. Strain Rate Dependent Modeling of Polymer Matrix Composites

    Science.gov (United States)

    Goldberg, Robert K.; Stouffer, Donald C.

    1999-01-01

    A research program is in progress to develop strain rate dependent deformation and failure models for the analysis of polymer matrix composites subject to high strain rate impact loads. Strain rate dependent inelastic constitutive equations have been developed to model the polymer matrix, and have been incorporated into a micromechanics approach to analyze polymer matrix composites. The Hashin failure criterion has been implemented within the micromechanics results to predict ply failure strengths. The deformation model has been implemented within LS-DYNA, a commercially available transient dynamic finite element code. The deformation response and ply failure stresses for the representative polymer matrix composite AS4/PEEK have been predicted for a variety of fiber orientations and strain rates. The predicted results compare favorably to experimentally obtained values.

  8. Composite materials for polymer electrolyte membrane microbial fuel cells.

    Science.gov (United States)

    Antolini, Ermete

    2015-07-15

    Recently, the feasibility of using composite metal-carbon, metal-polymer, polymer-carbon, polymer-polymer and carbon-carbon materials in microbial fuel cells (MFCs) has been investigated. These materials have been tested as MFC anode catalyst (microorganism) supports, cathode catalysts and membranes. These hybrid materials, possessing the properties of each component, or even with a synergistic effect, would present improved characteristics with respect to the bare components. In this paper we present an overview of the use of these composite materials in microbial fuel cells. The characteristics of the composite materials as well as their effect on MFC performance were compared with those of the individual component and/or the conventionally used materials.

  9. Multifunctional Composites Obtained by Incorporating Nanocrystals into Decorated PVK Polymers

    Directory of Open Access Journals (Sweden)

    Haizhu Sun

    2007-01-01

    Full Text Available Poly(vinylcarbazole (PVK was decorated with surfactant group to achieve amphiphilic polymer with luminescent property. The composition and properties of the polymers were systematically investigated using FTIR, EA, TGA, UV-Vis, and PL characterizations. Different CdTe nanocrystals (NCs prepared in aqueous medium were directly transferred to organic phase using the PVK-based polymers. The quantum yield of NCs in the composites had been improved by 50% compared with their parent aqueous solution due to the short distance from carbazole moieties to NCs, which facilitated the Förster resonant energy transfer (FRET between them. Moreover, efficient electron transfer at the interface of NCs and polymers had been confirmed which also indicated the application in photovoltaic cell for such composites.

  10. Metallized Nanotube Polymer Composite (MNPC) and Methods for Making Same

    Science.gov (United States)

    Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Nazem, Negin (Inventor); Taylor, Larry (Inventor); Kang, Jin Ho (Inventor); Kim, Jae-Woo (Inventor); Sauti, Godfrey (Inventor); Lillehei, Peter T. (Inventor); Lowther, Sharon E. (Inventor)

    2017-01-01

    A novel method to develop highly conductive functional materials which can effectively shield various electromagnetic effects (EMEs) and harmful radiations. Metallized nanotube polymer composites (MNPC) are composed of a lightweight polymer matrix, superstrong nanotubes (NT), and functional nanoparticle inclusions. MNPC is prepared by supercritical fluid infusion of various metal precursors (Au, Pt, Fe, and Ni salts), incorporated simultaneously or sequentially, into a solid NT-polymer composite followed by thermal reduction. The infused metal precursor tends to diffuse toward the nanotube surface preferentially as well as the surfaces of the NT-polymer matrix, and is reduced to form nanometer-scale metal particles or metal coatings. The conductivity of the MNPC increases with the metallization, which provides better shielding capabilities against various EMEs and radiations by reflecting and absorbing EM waves more efficiently. Furthermore, the supercritical fluid infusion process aids to improve the toughness of the composite films significantly regardless of the existence of metal.

  11. Carbon nanotube polymer composition and devices

    Science.gov (United States)

    Liu, Gao [Oakland, CA; Johnson, Stephen [Richmond, CA; Kerr, John B [Oakland, CA; Minor, Andrew M [El Cerrito, CA; Mao, Samuel S [Castro Valley, CA

    2011-06-14

    A thin film device and compound having an anode, a cathode, and at least one light emitting layer between the anode and cathode, the at least one light emitting layer having at least one carbon nanotube and a conductive polymer.

  12. Clay/polymer composites: the story

    OpenAIRE

    Fengge Gao

    2004-01-01

    Clay/polymer nanocomposites offer tremendous improvement in a wide range of physical and engineering properties for polymers with low filler loading. This technology can now be applied commercially and has received great attention in recent years. The major development in this field has been carried out over the last one and half decades. The progress, advantages, limitations, and current problems will be discussed in this review. So far, significant progress has been made in the development ...

  13. Composite ceramic superconducting wires for electric motor applications

    Science.gov (United States)

    Halloran, John W.

    1990-07-01

    Several types of HTSC wire have been produced and two types of HTSC motors are being built. Hundreds of meters of Ag- clad wire were fabricated from YBa2Cu3O(7-x) (Y-123) and Bi2Ca2Sr2Cu3O10 (BiSCCO). The dc homopolar motor coils are not yet completed, but multiple turns of wire have been wound on the coil bobbins to characterize the superconducting properties of coiled wire. Multifilamentary conductors were fabricated as cables and coils. The sintered polycrystalline wire has self-field critical current densities (Jc) as high as 2800 A/sq cm, but the Jc falls rapidly with magnetic field. To improve Jc, sintered YBCO wire is melt textured with a continuous process which has produced textures wire up to 0.5 meters long with 77K transport Jc above 11, 770 A/sq cm2 in self field and 2100 A/sq cm2 at 1 telsa. The Emerson Electric dc homopolar HTSC motor has been fabricated and run with conventional copper coils. A novel class of potential very powerful superconducting motors have been designed to use trapped flux in melt textures Y-123 as magnet replicas in an new type of permanent magnet motor. The stator element and part of the rotor of the first prototype machine exist, and the HTSC magnet replica segments are being fabricated.

  14. Superconducting composite with multilayer patterns and multiple buffer layers

    Science.gov (United States)

    Wu, Xin D.; Muenchausen, Ross E.

    1993-01-01

    An article of manufacture including a substrate, a patterned interlayer of a material selected from the group consisting of magnesium oxide, barium-titanium oxide or barium-zirconium oxide, the patterned interlayer material overcoated with a secondary interlayer material of yttria-stabilized zirconia or magnesium-aluminum oxide, upon the surface of the substrate whereby an intermediate article with an exposed surface of both the overcoated patterned interlayer and the substrate is formed, a coating of a buffer layer selected from the group consisting of cerium oxide, yttrium oxide, curium oxide, dysprosium oxide, erbium oxide, europium oxide, iron oxide, gadolinium oxide, holmium oxide, indium oxide, lanthanum oxide, manganese oxide, lutetium oxide, neodymium oxide, praseodymium oxide, plutonium oxide, samarium oxide, terbium oxide, thallium oxide, thulium oxide, yttrium oxide and ytterbium oxide over the entire exposed surface of the intermediate article, and, a ceramic superco n FIELD OF THE INVENTION The present invention relates to the field of superconducting articles having two distinct regions of superconductive material with differing in-plane orientations whereby the conductivity across the boundary between the two regions can be tailored. This invention is the result of a contract with the Department of Energy (Contract No. W-7405-ENG-36).

  15. Multifunctional Hybrid Carbon Nanotube/Carbon Fiber Polymer Composites

    Science.gov (United States)

    Kang, Jin Ho; Cano, Roberto J.; Ratcliffe, James G.; Luong, Hoa; Grimsley, Brian W.; Siochi, Emilie J.

    2016-01-01

    For aircraft primary structures, carbon fiber reinforced polymer (CFRP) composites possess many advantages over conventional aluminum alloys due to their light weight, higher strengthand stiffness-to-weight ratio, and low life-cycle maintenance costs. However, the relatively low electrical and thermal conductivities of CFRP composites fail to provide structural safety in certain operational conditions such as lightning strikes. Despite several attempts to solve these issues with the addition of carbon nanotubes (CNT) into polymer matrices, and/or by interleaving CNT sheets between conventional carbon fiber (CF) composite layers, there are still interfacial problems that exist between CNTs (or CF) and the resin. In this study, hybrid CNT/CF polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel® IM7/8852 prepreg. Resin concentrations from 1 wt% to 50 wt% were used to infuse the CNT sheets prior to composite fabrication. The interlaminar properties of the resulting hybrid composites were characterized by mode I and II fracture toughness testing (double cantilever beam and end-notched flexure test). Fractographical analysis was performed to study the effect of resin concentration. In addition, multi-directional physical properties like thermal conductivity of the orthotropic hybrid polymer composite were evaluated. Interleaving CNT sheets significantly improved the in-plane (axial and perpendicular direction of CF alignment) thermal conductivity of the hybrid composite laminates by 50 - 400%.

  16. Carbon-Nanotube-Reinforced Polymer-Derived Ceramic Composites

    Energy Technology Data Exchange (ETDEWEB)

    An, Linan; Xu, Weixing; Rajagopalan, Sudhir; Wang, Chong M.; Wang, Hsin; Fan, Yi; Zhang, Ligong; Jiang, Dapeng; Kapat, Jay; Chow, Louis; Guo, Baohua; Liang, Ji; Vaidyanathan, Raj

    2004-12-09

    Carbon nanotube reinforced ceramic composites were synthesized by using recently developed polymer-derived ceramics as matrices. Multi-wall carbon nanotubes, treated with a surfactant, were first dispersed in a liquid polymer precursor by sonication and mechanical stirring. The solution was then converted to fully dense ceramic composites with pressure-assist pyrolysis technique. Microstructural observation revealed that nanotubes were homogeneously dispersed throughout the ceramic matrix. Significant increases in mechanical and thermal properties were observed by adding only {approx}6vol% nanotubes. Strong nanotube pullout revealed by SEM observation suggested that the composites could possess high fracture toughness.

  17. Manufacturing Aspects of Advanced Polymer Composites for Automotive Applications

    Science.gov (United States)

    Friedrich, Klaus; Almajid, Abdulhakim A.

    2013-04-01

    Composite materials, in most cases fiber reinforced polymers, are nowadays used in many applications in which light weight and high specific modulus and strength are critical issues. The constituents of these materials and their special advantages relative to traditional materials are described in this paper. Further details are outlined regarding the present markets of polymer composites in Europe, and their special application in the automotive industry. In particular, the manufacturing of parts from thermoplastic as well as thermosetting, short and continuous fiber reinforced composites is emphasized.

  18. Eco-Challenges of Bio-Based Polymer Composites

    Directory of Open Access Journals (Sweden)

    Anita Grozdanov

    2009-08-01

    Full Text Available In recent years bio-based polymer composites have been the subject of many scientific and research projects, as well as many commercial programs. Growing global environmental and social concern, the high rate of depletion of petroleum resources and new environmental regulations have forced the search for new composites and green materials, compatible with the environment. The aim of this article is to present a brief review of the most suitable and commonly used biodegradable polymer matrices and NF reinforcements in eco-composites and nanocomposites, with special focus on PLA based materials.

  19. Electrochemical Formation of Polypyrrole-carboxymethylcellulose Conducting Polymer Composite Films

    Institute of Scientific and Technical Information of China (English)

    H.N.M. Ekramul Mahmud; Anuar Kassim; Zulkarnain Zainal; Wan Mahmood Mat Yunus

    2005-01-01

    The electrochemical preparation of polypyrrole-carboxymethylcellulose (PPY-CMC) conducting polymer composite films on indium tin oxide (ITO) glass electrode from an aqueous solution containing pyrrole monomer, ptoluenesulfonate electrolyte and carboxymethylcellulose insulating polymer is reported. The characterization by Fourier transform infrared spectroscopy (FT-IR) shows that carboxymethylcellulose (CMC) has been successfully incorporated into polypyrrole structure forming PPY-CMC polymer composite films. The conductivity of the prepared composite films was found to increase with increaseing CMC concentration in pyrrole solution. The optical microscopic results show the influence of CMC concentration in the pyrrole solution over the morphological changes of the prepared films. The dynamic mechanical analysis (DMA) on the prepared PPY-CMC film reveals the higher plastic property of the PPY-CMC composite film.

  20. Standard Guide for Testing Polymer Matrix Composite Materials

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2011-01-01

    1.1 This guide summarizes the application of ASTM standard test methods (and other supporting standards) to continuous-fiber reinforced polymer matrix composite materials. The most commonly used or most applicable ASTM standards are included, emphasizing use of standards of Committee D30 on Composite Materials. 1.2 This guide does not cover all possible standards that could apply to polymer matrix composites and restricts discussion to the documented scope. Commonly used but non-standard industry extensions of test method scopes, such as application of static test methods to fatigue testing, are not discussed. A more complete summary of general composite testing standards, including non-ASTM test methods, is included in the Composite Materials Handbook (MIL-HDBK-17). Additional specific recommendations for testing textile (fabric, braided) composites are contained in Guide D6856. 1.3 This guide does not specify a system of measurement; the systems specified within each of the referenced standards shall appl...

  1. Low cost composite structures for superconducting magnetic energy storage systems

    Energy Technology Data Exchange (ETDEWEB)

    Rix, C. (General Dynamics Space Magnetics, San Diego, CA (United States)); McColskey, D. (National Inst. of Standards and Technology, Boulder, CO (United States)); Acree, R. (Phillips Lab., Edwards Air Force Base, CA (United States))

    1994-07-01

    As part of the Superconducting Magnetic Energy Storage/Engineering Test Model (SMES-ETM) programs, design, analysis, fabrication and test programs were conducted to evaluate the low cost manufacturing of Fiberglass Reinforced Plastic (FRP) beams for usage as major components of the structural and electrical insulation systems. These studies utilized pultrusion process technologies and vinylester resins to produce large net sections at costs significantly below that of conventional materials. Demonstration articles incorporating laminate architectures and design details representative of SMES-ETM components were fabricated using the pultrusion process and epoxy, vinylester, and polyester resin systems. The mechanical and thermal properties of these articles were measured over the temperature range from 4 K to 300 K. The results of these tests showed that the pultruded, vinylester components have properties comparable to those of currently used materials, such as G-10, and are capable of meeting the design requirements for the SMES-ETM system.

  2. Graphene and Polymer Composites for Supercapacitor Applications: a Review

    Science.gov (United States)

    Gao, Yang

    2017-06-01

    Supercapacitors, as one of the energy storage devices, exhibit ultrahigh capacitance, high power density, and long cycle. High specific surface area, mechanical and chemical stability, and low cost are often required for supercapacitor materials. Graphene, as a new emerging carbon material, has attracted a lot of attention in energy storage field due to its intrinsic properties. Polymers are often incorporated into graphene for a number of enhanced or new properties as supercapacitors. In this paper, different polymers which are used to form composite materials for supercapacitor applications are reviewed. The functions, strategies, and the enhanced properties of graphene and polymer composites are discussed. Finally, the recent development of graphene and polymers for flexible supercapacitors are also discussed.

  3. CO2 Laser Cutting of Glass Fiber Reinforce Polymer Composite

    Science.gov (United States)

    Fatimah, S.; Ishak, M.; Aqida, S. N.

    2012-09-01

    The lamination, matrix properties, fiber orientation, and relative volume fraction of matrix of polymer structure make this polymer hard to process. The cutting of polymer composite using CO2 laser could involve in producing penetration energy in the process. Identification of the dominant factors that significantly affect the cut quality is important. The objective of this experiment is to evaluate the CO2 spot size of beam cutting for Glass Fiber Reinforce Polymer Composite (GFRP). The focal length selected 9.5mm which gave smallest focus spot size according to the cutting requirements. The effect of the focal length on the cut quality was investigated by monitoring the surface profile and focus spot size. The beam parameter has great effect on both the focused spot size and surface quality.

  4. The effect of water on thermal stresses in polymer composites

    Science.gov (United States)

    Sullivan, Roy M.

    1994-01-01

    The fundamentals of the thermodynamic theory of mixtures and continuum thermochemistry are reviewed for a mixture of condensed water and polymer. A specific mixture which is mechanically elastic with temperature and water concentration gradients present is considered. An expression for the partial pressure of water in the mixture is obtained based on certain assumptions regarding the thermodynamic state of the water in the mixture. Along with a simple diffusion equation, this partial pressure expression may be used to simulate the thermostructural behavior of polymer composite materials due to water in the free volumes of the polymer. These equations are applied to a specific polymer composite material during isothermal heating conditions. The thermal stresses obtained by the application of the theory are compared to measured results to verify the accuracy of the approach.

  5. Compositions, methods, and systems comprising fluorous-soluble polymers

    Science.gov (United States)

    Swager, Timothy M.; Lim, Jeewoo; Takeda, Yohei

    2015-10-13

    The present invention generally relates to compositions, methods, and systems comprising polymers that are fluorous-soluble and/or organize at interfaces between a fluorous phase and a non-fluorous phase. In some embodiments, emulsions or films are provided comprising a polymer. The polymers, emulsions, and films can be used in many applications, including for determining, treating, and/or imaging a condition and/or disease in a subject. The polymer may also be incorporated into various optoelectronic device such as photovoltaic cells, organic light-emitting diodes, organic field effect transistors, or the like. In some embodiments, the polymers comprise pi-conjugated backbones, and in some cases, are highly emissive.

  6. Mechanical and morphological properties of basalt filled polymer matrix composites

    OpenAIRE

    2009-01-01

    Purpose: The aim of this work is to study the effect of basalt on physical, mechanical and morphological of the injection molded LDPE.Design/methodology/approach: In this study, the effect of basalt was investigated as a filler material in polymer matrix composite (PMC) and low density polyethylene (LDPE) was chosen as a matrix material.Findings: A variety of mechanical tests were performed on the resultant composites which has appropriate compositions. Tensile, flexu...

  7. Nano-structured polymer composites and process for preparing same

    Science.gov (United States)

    Hillmyer, Marc; Chen, Liang

    2013-04-16

    A process for preparing a polymer composite that includes reacting (a) a multi-functional monomer and (b) a block copolymer comprising (i) a first block and (ii) a second block that includes a functional group capable of reacting with the multi-functional monomer, to form a crosslinked, nano-structured, bi-continuous composite. The composite includes a continuous matrix phase and a second continuous phase comprising the first block of the block copolymer.

  8. Polymer composites based on gypsum matrix

    Energy Technology Data Exchange (ETDEWEB)

    Mucha, Maria; Mróz, Patrycja; Kocemba, Aleksandra [Faculty of Process and Environmental Engineering, Lodz University of Technology, Wólczańska 215 street, 90–924 Łódź (Poland)

    2016-05-18

    The role of polymers as retarder additives is to prolong the workability connected with setting time of gypsum. Various cellulose derivatives, soluble in water in concentration up to 1,5% by weight were applied taking different water/binder ratio. The hydration process of calcium sulfate hemihydrate (gypsum binder) into dihydrate (gypsum plaster) was observed by setting and calorimetric techniques. Scanning electron microscopy confirmed that the gypsum microstructure was varied when polymers are used. The mechanical properties of gypsum plasters were studied by bending strength test and they are correlated with sample microstructure.

  9. Conductivity of carbon nanotube polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Wescott, J T; Kung, P; Maiti, A

    2006-11-20

    Dissipative Particle Dynamics (DPD) simulations were used to investigate methods of controlling the assembly of percolating networks of carbon nanotubes (CNTs) in thin films of block copolymer melts. For suitably chosen polymers the CNTs were found to spontaneously self-assemble into topologically interesting patterns. The mesoscale morphology was projected onto a finite-element grid and the electrical conductivity of the films computed. The conductivity displayed non-monotonic behavior as a function of relative polymer fractions in the melt. Results are compared and contrasted with CNT dispersion in small-molecule fluids and mixtures.

  10. Electrical and thermal percolation in carbon nanotube- polymer composites

    OpenAIRE

    Kim, Byung-Wook

    2014-01-01

    Electrical and thermal properties of carbon-nanotube (CNT) /polymer composites were investigated through percolating behavior of conducting fillers in insulating matrix. Synthesis methodology has been found using a blend of solution processing, which was adapted to facilitate uniformly distributed CNTs in polymer matrix and consequently to contribute to percolation. The onset of percolation thresholds depending on aspect ratio of fillers were theoretically estimated by the excluded volume met...

  11. Polymer-Nanoparticle Composites: From Synthesis to Modern Applications

    Directory of Open Access Journals (Sweden)

    Thomas Hanemann

    2010-05-01

    Full Text Available The addition of inorganic spherical nanoparticles to polymers allows the modification of the polymers physical properties as well as the implementation of new features in the polymer matrix. This review article covers considerations on special features of inorganic nanoparticles, the most important synthesis methods for ceramic nanoparticles and nanocomposites, nanoparticle surface modification, and composite formation, including drawbacks. Classical nanocomposite properties, as thermomechanical, dielectric, conductive, magnetic, as well as optical properties, will be summarized. Finally, typical existing and potential applications will be shown with the focus on new and innovative applications, like in energy storage systems.

  12. In situ preparation of Nanoparticles/polymer composites

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Nanoparticle (NP) is the matter between molecule and bulk material. It has attracted much attention in catalysis, optoelectronics and biology due to its unique physical and chemical properties. Incorporation of these NPs into the polymer matrix is one of the best methods to display their special functions, which not only stabilize the NPs but also realize the functional assembly of NPs and polymers. However, reali- zation of this idea depends largely on the compatibility of NPs and polymers as well as the interaction between them. Therefore, many methods have been developed to prepare the composites of NPs and polymers in order to obtain the function ex- pected. In this review, we mainly focus on the combination of in situ method with other methods to synthesize different functional one-dimension, two-dimension as well as bulk composites, which has been recently developed by our group. The most striking character of our method is the excellent compatibility between NPs and polymers which ensures a homogeneous distribution of NPs in the polymer matrix. The existence of the polymer network makes the NPs more stable, and is significant for displaying their functions.

  13. In situ preparation of Nanoparticles/polymer composites

    Institute of Scientific and Technical Information of China (English)

    SUN HaiZhu; YANG Bai

    2008-01-01

    Nanoparticle (NP) is the matter between molecule and bulk material. It has attracted much attention in catalysis, optoelectronics and biology due to its unique physical and chemical properties. Incorporation of these NPs into the polymer matrix is one of the best methods to display their special functions, which not only stabilize the NPs but also realize the functional assembly of NPs and polymers. However, reali-zation of this idea depends largely on the compatibility of NPs and polymers as well as the interaction between them. Therefore, many methods have been developed to prepare the composites of NPs and polymers in order to obtain the function ex-pected. In this review, we mainly focus on the combination of in situ method with other methods to synthesize different functional one-dimension, two-dimension as well as bulk composites, which has been recently developed by our group. The most striking character of our method is the excellent compatibility between NPs and polymers which ensures a homogeneous distribution of NPs in the polymer matrix. The existence of the polymer network makes the NPs more stable, and is significant for displaying their functions.

  14. Electrospinning of polymer-aerogel composite fibres

    DEFF Research Database (Denmark)

    Christiansen, Lasse; Fojan, Peter

    2016-01-01

    En poster om produktion af polymer-aerogel kompositfibre ved hjælp af elektrospinning. Fiberne er produceret fra en opløsning af aerogel og polyethylene oxide i vand, som er elektrospundet gennem en enkeltnålsprocess....

  15. Water-soluble polymers and compositions thereof

    Science.gov (United States)

    Smith, B.F.; Robison, T.W.; Gohdes, J.W.

    1999-04-06

    Water-soluble polymers including functionalization from the group of amino groups, carboxylic acid groups, phosphonic acid groups, phosphonic ester groups, acylpyrazolone groups, hydroxamic acid groups, aza crown ether groups, oxy crown ethers groups, guanidinium groups, amide groups, ester groups, aminodicarboxylic groups, permethylated polyvinylpyridine groups, permethylated amine groups, mercaptosuccinic acid groups, alkyl thiol groups, and N-alkylthiourea groups are disclosed.

  16. Compositions for directed alignment of conjugated polymers

    Science.gov (United States)

    Kim, Jinsang; Kim, Bong-Gi; Jeong, Eun Jeong

    2016-04-19

    Conjugated polymers (CPs) achieve directed alignment along an applied flow field and a dichroic ratio of as high as 16.67 in emission from well-aligned thin films and fully realized anisotropic optoelectronic properties of CPs in field-effect transistor (FET).

  17. Biodegradable ceramic-polymer composites for biomedical applications: A review.

    Science.gov (United States)

    Dziadek, Michal; Stodolak-Zych, Ewa; Cholewa-Kowalska, Katarzyna

    2017-02-01

    The present work focuses on the state-of-the-art of biodegradable ceramic-polymer composites with particular emphasis on influence of various types of ceramic fillers on properties of the composites. First, the general needs to create composite materials for medical applications are briefly introduced. Second, various types of polymeric materials used as matrices of ceramic-containing composites and their properties are reviewed. Third, silica nanocomposites and their material as well as biological characteristics are presented. Fourth, different types of glass fillers including silicate, borate and phosphate glasses and their effect on a number of properties of the composites are described. Fifth, wollastonite as a composite modifier and its effect on composite characteristics are discussed. Sixth, composites containing calcium phosphate ceramics, namely hydroxyapatite, tricalcium phosphate and biphasic calcium phosphate are presented. Finally, general possibilities for control of properties of composite materials are highlighted. Copyright © 2016 Elsevier B.V. All rights reserved.

  18. Carbon nanotube and conducting polymer composites for supercapacitors

    Institute of Scientific and Technical Information of China (English)

    Chuang Peng; Shengwen Zhang; Daniel Jewell; George Z. Chen

    2008-01-01

    Composites of carbon nanotubes and conducting polymers can be prepared via chemical synthesis, electrochemical deposition on pre-formed carbon nanotube electrodes, or by electrochemical co-deposition. The composites combine the large pseudocapacitance of the conducting polymers with the fast charging/discharging double-layer capacitance and excellent mechanical properties of the carbon nanotubes. The electrochemically co-deposited composites are the most homogeneous and show an unusual interaction between thepolymer and nanotubes, giving rise to a strengthened electron delocalisation and conjugation along the polymer chains. As a result they exhibit excellent electrochemical charge storage properties and fast charge/discharge switching, making them promising electrode mate-rials for high power supercapacitors.

  19. Mineralized polymer composites as biogenic bone substitute material

    Science.gov (United States)

    Shah, Rushita; Saha, Nabanita; Kitano, Takeshi; Saha, Petr

    2015-05-01

    Mineralized polymer composites (MPC) are recognized as potential fillers of bone defects. Though bioceramics exhibits quite a good bone-bonding and vascularization, it is considered to be too stiff and brittle for using alone. Thus, the use of polymer scaffold instead of bioceramics has several advantages including combining the osteoconductivity and bone-bonding potential of the inorganic phase with the porosity and interconnectivity of the three-dimensional construction. Aiming the advantages of ceramic-polymer composite scaffolds, the calcium carbonate (CaCO3) based biomineralized scaffold was prepared, where the PVP-CMC hydrogel was used as an extracellular matrix. This paper is reported about the morphology, swelling trend (in physiological solution) and viscoelastic behavior of (90 min mineralized) MPC. The dry MPC are off-white, coarse in texture, comparatively less flexible than the original PVP-CMC based hydrogel film, and the deposition of granular structures on the surface of the hydrogel film confirms about the development of biomineralized scaffold/polymer composites. Irrespective of thickness, the dry MPC shows higher values of swelling ratio within 30 min, which varies between 200-250 approximately. The dynamic viscoelastic nature of freshly prepared MPC was investigated applying 1% and 10% strain. At higher strain the viscoelastic moduli (G' and G") show significant change, and the nature of MPC turns from elastic to viscous. Based on the observed basic properties, the MPC (calcite based polymer composites) can be recommended for the treatment of adyanamic bone disorder.

  20. Thermal Protective Coating for High Temperature Polymer Composites

    Science.gov (United States)

    Barron, Andrew R.

    1999-01-01

    The central theme of this research is the application of carboxylate-alumoxane nanoparticles as precursors to thermally protective coatings for high temperature polymer composites. In addition, we will investigate the application of carboxylate-alumoxane nanoparticle as a component to polymer composites. The objective of this research was the high temperature protection of polymer composites via novel chemistry. The significance of this research is the development of a low cost and highly flexible synthetic methodology, with a compatible processing technique, for the fabrication of high temperature polymer composites. We proposed to accomplish this broad goal through the use of a class of ceramic precursor material, alumoxanes. Alumoxanes are nano-particles with a boehmite-like structure and an organic periphery. The technical goals of this program are to prepare and evaluate water soluble carboxylate-alumoxane for the preparation of ceramic coatings on polymer substrates. Our proposed approach is attractive since proof of concept has been demonstrated under the NRA 96-LeRC-1 Technology for Advanced High Temperature Gas Turbine Engines, HITEMP Program. For example, carbon and Kevlar(tm) fibers and matting have been successfully coated with ceramic thermally protective layers.

  1. Soundproofing effect of nano particle reinforced polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Jae Chul; Hong, Young Sun; Nan, Ri Guang; Ahn, Sung Hoon; Kang, Yeon Jun [Seoul National University, Seoul (Korea, Republic of); Jang, Moon Kyu [LS Cable Ltd., Anyang (Korea, Republic of); Lee, Caroline S. [Hanyang University, Ansan (Korea, Republic of)

    2008-08-15

    In this paper, the effects of soundproofing by polymer and carbon-nanotube (CNT) composites were investigated. The specimens for sound insulation measurement were fabricated with Acrylonitrile Butadiene Styrene (ABS)/CNT composites. Tests showed that sound transmission loss of ABS/CNT 15 vol.% composite was higher by 21.7% (4.1 dB) than that of pure ABS specimen at a frequency of 3400 Hz. It was found that the principal factor influencing the improvement of sound insulations of ABS/CNT composites was increased stiffness by CNT additives. To demonstrate the practical applicability of polymer/CNT composites, tests were conducted for the reduction of operational noise from mechanical relay

  2. Radiation-protective polymer-matrix nanostructured composites

    Energy Technology Data Exchange (ETDEWEB)

    Kaloshkin, S.D.; Tcherdyntsev, V.V. [College of Advanced Materials and Nanotechnologies, National University of Science and Technology ' MISiS' , Leninsky Prospect, 4 Moscow (Russian Federation); Gorshenkov, M.V., E-mail: mvg@misis.ru [College of Advanced Materials and Nanotechnologies, National University of Science and Technology ' MISiS' , Leninsky Prospect, 4 Moscow (Russian Federation); Gulbin, V.N. [College of Advanced Materials and Nanotechnologies, National University of Science and Technology ' MISiS' , Leninsky Prospect, 4 Moscow (Russian Federation); Kuznetsov, S.A. [Russian State Technological University ' MATI' , Orshanskaya 3, Moscow (Russian Federation)

    2012-09-25

    Highlights: Black-Right-Pointing-Pointer Radiation-protective composites were fabricated by solid state intermixing and thermal pressing. Black-Right-Pointing-Pointer The composites based on UHMWPE contain B{sub 4}S and W nanopowders as fillers. Black-Right-Pointing-Pointer The mechanical and {gamma}-radiation protective properties of the polymer-matrix nanocomposites were determined experimentally. Black-Right-Pointing-Pointer For composites containing 12% B{sub 4}C and 12% W the mechanical properties were studied prior to and after the irradiation with fast neutrons. - Abstract: UHMWPE-based nanostructured composites containing B{sub 4}C and W nanopowders were fabricated and studied. The mechanical and {gamma}-radiation protective properties of the polymer-matrix nanocomposites were determined experimentally. For selected composites the mechanical properties were studied prior to and after the irradiation.

  3. Temperature effects on polymer-carbon composite sensors: evaluating the role of polymer molecular weight and carbon loading

    Science.gov (United States)

    Homer, M. L.; Lim, J. R.; Manatt, K.; Kisor, A.; Lara, L.; Jewell, A. D.; Yen, S. -P. S.; Shevade, A. V.; Ryan, M. A.

    2003-01-01

    We report the effect of environmental condtions coupled with varying polymer properties and carbon loadings on the performance of polymer-carbon black composite film, used as sensing medium in the JPL Electronic Nose.

  4. Composite polymer electrolyte membranes supported by non-woven fabrics for lithium-ion polymer batteries

    Institute of Scientific and Technical Information of China (English)

    TANG Dingguo; LIU Jianhong; QI Lu; CHEN Hui; CI Yunxiang

    2005-01-01

    Poly(vinylidene fluoride-co-hexafluoropropyle- ne) (PVDF-HFP) is one of the most popular polymers for polymer electrolyte membranes because of its excellent operating characteristics and superior electrochemical properties. The electrochemical performances of polymer electrolyte membrane can be enhanced by evenly dispersing nano-meter SiO2 particles in the polymer. In this paper, non-woven fabrics were immersed in the mixed solution of PVDF-HFP/ SiO2/butanone/butanol/plasticizer, and then dried in a vacuum oven to remove the solvents and the plasticizer and to make porous composite polymer electrolyte membranes. The prepared composite membranes supported by non-woven fabrics boast good mechanical strength and excellent electrochemical properties: the electrochemical stability window is 4.8 V vs. Li+/Li, and the ionic conductivity is 3.35×10-4 S/cm (around 60% of that of a common PE membrane) at room temperature. The lithium-ion polymer battery assembled by the composite membrane exhibits high rate capability and excellent cycling performance.

  5. Crystallographic texturing in Nb3Sn multifilamentary superconducting composites

    Science.gov (United States)

    Cogan, Stuart F.; Rose, Robert M.

    1980-03-01

    Crystallographic texturing in Nb3Sn composites, fabricated by both the external diffusion and the commercial bronze processes, has been investigated. In the external-diffusion-processed composite the as-drawn texture of the copper matrix contained ca. 55% and 45% ; after recrystallization at 650 °C for 16 h this changed to 70% and 30% . Tin plating and reaction heat treatment for 40 h at 650 °C eliminated most of the texturing. In a commercial bronze-processed composite a or texture was obtained in the as-drawn bronze matrix, and after a reaction heat treatment at 700 °C for 30 h a diffuse texture was developed. In both composites the Nb3Sn reaction layer exhibited no preferred orientation.

  6. Nanophosphor composite scintillators comprising a polymer matrix

    Science.gov (United States)

    Muenchausen, Ross Edward; Mckigney, Edward Allen; Gilbertson, Robert David

    2010-11-16

    An improved nanophosphor composite comprises surface modified nanophosphor particles in a solid matrix. The nanophosphor particle surface is modified with an organic ligand, or by covalently bonding a polymeric or polymeric precursor material. The surface modified nanophosphor particle is essentially charge neutral, thereby preventing agglomeration of the nanophosphor particles during formation of the composite material. The improved nanophosphor composite may be used in any conventional scintillator application, including in a radiation detector.

  7. Properties of Plant Fiber Yarn Polymer Composites

    DEFF Research Database (Denmark)

    Madsen, Bo

    2004-01-01

    of aligned hemp yarn composites have been investigated. Moisture diffusion is non-Fickian, and is characterised by so-called two-stage diffusion behaviour, which is a well-known phenomenon in synthetic fibre composites. The rate of moisture diffusion is largest along the fibres, and also different in the two....... This underlines a critical aspect in the use of plant fibres; i.e. their properties are less controllable in comparison to the properties of synthetic fibres. The axial tensile properties of the composites are affected only little by the degree of fibre/matrix compatibility. Even for composites with a strong...

  8. Theory analysis of critical-current degeneration in bended superconducting tapes of multifilament composite Bi2223/Ag

    Energy Technology Data Exchange (ETDEWEB)

    Gao, Peifeng; Wang, Xingzhe, E-mail: xzwang@lzu.edu.cn

    2015-10-15

    Highlights: • We proposed an empirical model to describe carrying-current degradation of bent Bi2223/Ag tapes. • Asymmetric damage of superconductor multifilament is taken into account. • Both the loading and unloading processes of bend deformation are captured. • Carrying-current property can be improved by designing configuration of the multifilament core. - Abstract: This paper proposed a degradation model to explore the influence of the mechanical bending deformation on the critical-current of superconducting composite Bi2223/Ag tape taking into account the asymmetric mechanical damage. With the aid of Weibull distribution function of statistical damage of filaments, the critical-current dependence upon bending strain of the superconducting tape in processes of loading and unloading is characterized. The degradation profile of critical-current in the superconducting composite tape is theoretically investigated by the proposed model for different critical damage strains and configurations of superconducting multifilament core at the cross-section. It is shown that the theoretical predictions are in reasonably good agreement with the experimental data, and the configuration of the multifilament core of the superconducting composite tape has a significant influence on the critical-current degradation. The superconducting multifilament core located near the compression region of the cross-section remarkably improves the mechanical and carrying-current capabilities of the superconducting composite tape.

  9. High-temperature processing of oxide superconductors and superconducting oxide-silver oxide composite

    Science.gov (United States)

    Wu, M. K.; Loo, B. H.; Peters, P. N.; Huang, C. Y.

    1988-01-01

    High temperature processing was found to partially convert the green 211 phase oxide to 123 phase. High Tc superconductivity was observed in Bi-Sr-Cu-O and Y-Sr-Cu-O systems prepared using the same heat treatment process. High temperature processing presents an alternative synthetic route in the search for new high Tc superconductors. An unusual magnetic suspension with enhancement in critical current density was observed in the 123 and AgO composite.

  10. Solid polymer electrolyte composite membrane comprising plasma etched porous support

    Science.gov (United States)

    Liu, Han; LaConti, Anthony B.

    2010-10-05

    A solid polymer electrolyte composite membrane and method of manufacturing the same. According to one embodiment, the composite membrane comprises a rigid, non-electrically-conducting support, the support preferably being a sheet of polyimide having a thickness of about 7.5 to 15 microns. The support has a plurality of cylindrical pores extending perpendicularly between opposing top and bottom surfaces of the support. The pores, which preferably have a diameter of about 0.1 to 5 microns, are made by plasma etching and preferably are arranged in a defined pattern, for example, with fewer pores located in areas of high membrane stress and more pores located in areas of low membrane stress. The pores are filled with a first solid polymer electrolyte, such as a perfluorosulfonic acid (PFSA) polymer. A second solid polymer electrolyte, which may be the same as or different than the first solid polymer electrolyte, may be deposited over the top and/or bottom of the first solid polymer electrolyte.

  11. Characterization of chitosan composites with synthetic polymers and inorganic additives.

    Science.gov (United States)

    Lewandowska, Katarzyna

    2015-11-01

    In the present study, the results from thermogravimetric analysis (TGA), contact angle measurements, tensile tests, scanning electron microscopy (SEM) and atomic force microscopy (AFM) of polymer composites containing chitosan (Ch) and montmorillonite (MMT) with and without poly(vinyl alcohol) (PVA) are presented. Measurements of the contact angles for diiodomethane (D) and glycerol (G) on the surfaces of chitosan films, Ch/MMT and Ch/PVA/MMT, were made and surface free energies were calculated. It was found that the wettability of the chitosan/MMT or Ch/PVA/MMT composite films decreased relative to the wettability of chitosan. The microstructure of unmodified polymers and their composites, as observed by SEM and AFM, showed particles that are relatively well dispersed in the polymer matrix. The TGA thermograms and mass loss percentages at different decomposition temperatures showed that the thermal stability of the binary composite slightly decreases upon the addition of PVA. The film mechanical properties such as tensile strength, Young's modulus and tensile strain at break depend on the composition and varied non-uniformly. Both composites possessed a tensile strength and Young's modulus of 27.6-94.3MPa and 1.5-3.5GPa, respectively. The addition of PVA to the composite led to a reduction in tensile strength by approximately 40%.

  12. The dynamic response of carbon fiber-filled polymer composites

    OpenAIRE

    Patterson B.; Orler E.B.; Furmanski J.; Rigg P.A.; Scharff R.J.; Stahl D.B.; Sheffield S.A.; Gustavsen R.L.; Dattelbaum D.M.; Coe J.D.

    2012-01-01

    The dynamic (shock) responses of two carbon fiber-filled polymer composites have been quantified using gas gun-driven plate impact experimentation. The first composite is a filament-wound, highly unidirectional carbon fiber-filled epoxy with a high degree of porosity. The second composite is a chopped carbon fiber- and graphite-filled phenolic resin with little-to-no porosity. Hugoniot data are presented for the carbon fiber-epoxy (CE) composite to 18.6 GPa in the through-thickness direction,...

  13. Progressive delamination in polymer matrix composite laminates: A new approach

    Science.gov (United States)

    Chamis, C. C.; Murthy, P. L. N.; Minnetyan, L.

    1992-01-01

    A new approach independent of stress intensity factors and fracture toughness parameters has been developed and is described for the computational simulation of progressive delamination in polymer matrix composite laminates. The damage stages are quantified based on physics via composite mechanics while the degradation of the laminate behavior is quantified via the finite element method. The approach accounts for all types of composite behavior, laminate configuration, load conditions, and delamination processes starting from damage initiation, to unstable propagation, and to laminate fracture. Results of laminate fracture in composite beams, panels, plates, and shells are presented to demonstrate the effectiveness and versatility of this new approach.

  14. High Strain Rate Behavior of Polymer Matrix Composites Analyzed

    Science.gov (United States)

    Goldberg, Robert K.; Roberts, Gary D.

    2001-01-01

    Procedures for modeling the high-speed impact of composite materials are needed for designing reliable composite engine cases that are lighter than the metal cases in current use. The types of polymer matrix composites that are likely to be used in such an application have a deformation response that is nonlinear and that varies with strain rate. To characterize and validate material models that could be used in the design of impactresistant engine cases, researchers must obtain material data over a wide variety of strain rates. An experimental program has been carried out through a university grant with the Ohio State University to obtain deformation data for a representative polymer matrix composite for strain rates ranging from quasi-static to high rates of several hundred per second. This information has been used to characterize and validate a constitutive model that was developed at the NASA Glenn Research Center.

  15. Properties of Polymer Composites Used in High-Voltage Applications

    Directory of Open Access Journals (Sweden)

    Ilona Pleşa

    2016-04-01

    Full Text Available The present review article represents a comprehensive study on polymer micro/nanocomposites that are used in high-voltage applications. Particular focus is on the structure-property relationship of composite materials used in power engineering, by exploiting fundamental theory as well as numerical/analytical models and the influence of material design on electrical, mechanical and thermal properties. In addition to describing the scientific development of micro/nanocomposites electrical features desired in power engineering, the study is mainly focused on the electrical properties of insulating materials, particularly cross-linked polyethylene (XLPE and epoxy resins, unfilled and filled with different types of filler. Polymer micro/nanocomposites based on XLPE and epoxy resins are usually used as insulating systems for high-voltage applications, such as: cables, generators, motors, cast resin dry-type transformers, etc. Furthermore, this paper includes ample discussions regarding the advantages and disadvantages resulting in the electrical, mechanical and thermal properties by the addition of micro- and nanofillers into the base polymer. The study goals are to determine the impact of filler size, type and distribution of the particles into the polymer matrix on the electrical, mechanical and thermal properties of the polymer micro/nanocomposites compared to the neat polymer and traditionally materials used as insulation systems in high-voltage engineering. Properties such as electrical conductivity, relative permittivity, dielectric losses, partial discharges, erosion resistance, space charge behavior, electric breakdown, tracking and electrical tree resistance, thermal conductivity, tensile strength and modulus, elongation at break of micro- and nanocomposites based on epoxy resin and XLPE are analyzed. Finally, it was concluded that the use of polymer micro/nanocomposites in electrical engineering is very promising and further research work

  16. Solution electrospinning of particle-polymer composite fibres

    DEFF Research Database (Denmark)

    Christiansen, Lasse; Fojan, Peter

    2016-01-01

    into scaffolds. The formation of a particle/polymer composite results in improved mechanical stability, without compromising the porosity. In the presented study, aerogel and poly(ethylene oxide) are mixed into a solution, and spun to thin fibres. Thereby a porous membrane, on the micro- and nano...

  17. Electrochemical behaviors of novel composite polymer electrolytes for lithium batteries

    Institute of Scientific and Technical Information of China (English)

    Guorong Chen; Pengfei Shi; Yongping Bai; Taibing Fan

    2004-01-01

    A novel composite polymer electrolyte was prepared by blending an appropriate amount of LiClO4 and 10% (mass fraction)fumed SiO2 with the block copolymer of poly (ethylene oxide) (PEO) synthesized by poly (ethylene glycol) (PEG) 400 and CH2Cl2.The ionic conductivity, electrochemical stability, interfacial characteristic and thermal behavior of the composite polymer electrolytewere studied by the measurements of AC impedance spectroscopy, linear sweep voltammetry and differential scanning calorimetry(DSC), respectively. The glass transition temperature acts as a function of salt concentration, which increases with the LiClO4 content.Lewis acid-base model interaction mechanism was introduced to interpret the interactive relation between the filled fumed SiO2 andthe lithium salt in the composite polymer electrolyte. Over the salt concentration range and the measured temperature, the maximumionic conductivity of the composite polymer electrolyte (10-4.41 S/cm) appeared at EO/Li=25 (mole ratio) and 30℃, and the begin-ning oxidative degradation potential versus Li beyond 5 V.

  18. Self healing in polymers and polymer composites. Concepts, realization and outlook: A review

    Directory of Open Access Journals (Sweden)

    2008-04-01

    Full Text Available Formation of microcracks is a critical problem in polymers and polymer composites during their service in structural applications. Development and coalescence of microcracks would bring about catastrophic failure of the materials and then reduce their lifetimes. Therefore, early sensing, diagnosis and repair of microcracks become necessary for removing the latent perils. In this context, the materials possessing self-healing function are ideal for long-term operation. Self-repairing polymers and polymer composites have attracted increasing research interests. Attempts have been made to develop solutions in this field. The present article reviews state-of-art of the achievements on the topic. According to the ways of healing, the smart materials are classified into two categories: (i intrinsic self-healing ones that are able to heal cracks by the polymers themselves, and (ii extrinsic in which healing agent has to be pre-embedded. The advances in this field show that selection and optimization of proper repair mechanisms are prerequisites for high healing efficiency. It is a challenging job to either invent new polymers with inherent crack repair capability or integrate existing materials with novel healing system.

  19. Prototype of low thermal expansion materials: fabrication of mesoporous silica/polymer composites with densely filled polymer inside mesopore space.

    Science.gov (United States)

    Kiba, Shosuke; Suzuki, Norihiro; Okawauchi, Yoshinori; Yamauchi, Yusuke

    2010-09-03

    A prototype of novel low thermal expansion materials using mesoporous silica particles is demonstrated. Mesoporous silica/polymer composites with densely filled polymer inside the mesopore space are fabricated by mechanically mixing both organically modified mesoporous silica and epoxy polymer. The mesopores are easily penetrated by polymers as a result of the capillary force during the mechanical composite processing. Furthermore, we propose a new model of polymer mobility restriction using mesoporous silica with a large pore space. The robust inorganic frameworks covering the polymer effectively restrict the polymer mobility against thermal energy. As a result, the degree of total thermal expansion of the composites is drastically decreased. From the mass-normalized thermal mechanical analysis (TMA) charts of various composites with different amounts of mesoporous silica particles, it is observed that the coefficient of thermal expansion (CTE) values gradually increase with an increase of the polymer amount outside the mesopores. It is proven that the CTE values in the range over the glass-transition temperatures (T(g)) are perfectly proportional to the outside polymer amounts. Importantly, the Y-intercept of the relation equation obtained by a least-square method is the CTE value and is almost zero. This means that thermal expansion does not occur if no polymers are outside the mesopores. Through such a quantative discussion, we clarify that only the outside polymer affects the thermal expansion of the composites, that is, the embedded polymers inside the mesopores do not expand at all during the thermal treatment.

  20. Porous polymer networks and ion-exchange media and metal-polymer composites made therefrom

    Energy Technology Data Exchange (ETDEWEB)

    Kanatzidis, Mercouri G.; Katsoulidis, Alexandros

    2016-10-18

    Porous polymeric networks and composite materials comprising metal nanoparticles distributed in the polymeric networks are provided. Also provided are methods for using the polymeric networks and the composite materials in liquid- and vapor-phase waste remediation applications. The porous polymeric networks, are highly porous, three-dimensional structures characterized by high surface areas. The polymeric networks comprise polymers polymerized from aldehydes and phenolic molecules.

  1. Composite Polymer Electrolytes: Nanoparticles Affect Structure and Properties

    Directory of Open Access Journals (Sweden)

    Wei Wang

    2016-11-01

    Full Text Available Composite polymer electrolytes (CPEs can significantly improve the performance in electrochemical devices such as lithium-ion batteries. This review summarizes property/performance relationships in the case where nanoparticles are introduced to polymer electrolytes. It is the aim of this review to provide a knowledge network that elucidates the role of nano-additives in the CPEs. Central to the discussion is the impact on the CPE performance of properties such as crystalline/amorphous structure, dielectric behavior, and interactions within the CPE. The amorphous domains of semi-crystalline polymer facilitate the ion transport, while an enhanced mobility of polymer chains contributes to high ionic conductivity. Dielectric properties reflect the relaxation behavior of polymer chains as an important factor in ion conduction. Further, the dielectric constant (ε determines the capability of the polymer to dissolve salt. The atom/ion/nanoparticle interactions within CPEs suggest ways to enhance the CPE conductivity by generating more free lithium ions. Certain properties can be improved simultaneously by nanoparticle addition in order to optimize the overall performance of the electrolyte. The effects of nano-additives on thermal and mechanical properties of CPEs are also presented in order to evaluate the electrolyte competence for lithium-ion battery applications.

  2. Fabrication and characterization of S. cilliare fibre reinforced polymer composites

    Indian Academy of Sciences (India)

    A S Singha; Vijay Kumar Thakur

    2009-02-01

    In the recent times, there has been an ever-increasing interest in green composite materials for its applications in the field of industries, aerospace, sports, household etc and in many other fields. In this paper, fabrication of Saccharum cilliare fibre reinforced green polymer composites using resorcinol formaldehyde (RF) as a novel matrix has been reported. A systematic approach for processing of polymer is presented. Effect of fibre loading on mechanical properties like flexural, tensile, compressive and wear resistances has also been determined. Reinforcing of the RF resin with Saccharum cilliare (SC) fibre was done in the form of particle size (200 micron). Present work reveals that mechanical properties of the RF resin have been found to increase up to 30% fibre loading and then decreases. Morphological and thermal studies of the resin, fibre and particle reinforced (P-Rnf) green composites have also been studied.

  3. Wear properties of nanosilica filled epoxy polymers and FRP composites

    Directory of Open Access Journals (Sweden)

    A. Jumahat

    2015-09-01

    Full Text Available This paper is aimed to determine the wear properties of nanosilica filled epoxy polymers and FRP composites. Woven fiberglass has been deployed as the reinforcement material. The fibers were mixed with three different percentages of nanosilica-modified epoxy resin, i.e: 5wt%; 13wt%; 25wt%, in order to fabricate the desired samples of FRP composites. The effect of nanosilica on wear properties was evaluated using dry sliding wear and slurry tests. The results show that increasing the amount of nanosilica content has reduced the amount of accumulated mass loss. It was found that the FRP laminates with 25wt% of nanosilica have the highest wear resistance. The nanosilica filled fiber reinforced polymer composites have a high potential in tribological application such as ball bearing housing and snow sleds.

  4. Additive Manufacturing of Ultem Polymers and Composites

    Science.gov (United States)

    Chuang, Kathy C.; Grady, Joseph E.; Draper, Robert D.; Shin, Euy-Sik E.; Patterson, Clark; Santelle, Thomas D.

    2015-01-01

    The objective of this project was to conduct additive manufacturing to produce aircraft engine components by Fused Deposition Modeling (FDM), using commercially available polyetherimdes Ultem 9085 and experimental Ultem 1000 filled with 10 chopped carbon fiber. A property comparison between FDM-printed and injection molded coupons for Ultem 9085, Ultem 1000 resin and the fiber-filled composite Ultem 1000 was carried out. Furthermore, an acoustic liner was printed from Ultem 9085 simulating conventional honeycomb structured liners and tested in a wind tunnel. Composite compressor inlet guide vanes were also printed using fiber-filled Ultem 1000 filaments and tested in a cascade rig. The fiber-filled Ultem 1000 filaments and composite vanes were characterized by scanning electron microscope (SEM) and acid digestion to determine the porosity of FDM-printed articles which ranged from 25-31. Coupons of Ultem 9085, experimental Ultem 1000 composites and XH6050 resin were tested at room temperature and 400F to evaluate their corresponding mechanical properties.

  5. Sensing and Energy Harvesting Novel Polymer Composites

    NARCIS (Netherlands)

    Zwaag, S. van der; Ende, D.A. van der; Groen, W.A.

    2014-01-01

    This chapter describes the development and properties of novel functional composite materials consisting of aligned piezo-ceramic particles or fibers in a polymeric matrix, which can be fully integrated in thermoset or thermoplastic products. The materials have a low potential for applications requi

  6. Mechanical properties of glass polymer multilayer composite

    Indian Academy of Sciences (India)

    A Seal; N R Bose; S K Dalui; A K Mukhopadhyay; K K Phani; H S Maiti

    2001-04-01

    The preliminary experimental studies on the comparative behaviour of the deformation processes involved in the failure of a commercial, 0.3 mm thick, 18 mm diameter soda–lime–silica glass disks () and multilayered glass disk–epoxy (GE) as well as glass disk–epoxy–-glass fabric (GEF) composite structures are reported. The failure tests were conducted in a biaxial flexure at room temperature. The epoxy was a commercial resin and the -glass fabric was also commercially obtained as a two-dimensional weave of -glass fibres to an area density of about 242 g m–2. The multilayered structures were developed by alternate placement of the glass and reinforcing layers by a hand lay-up technique followed by lamination at an appropriate temperature and pressure. Depending on the number of layers the volume fraction of reinforcement could be varied from about 0.20 for the GE system to about 0.50 for the GEF system. It was observed that the specific failure load (load per unit thickness) was enhanced from a value of about 60 N/mm obtained for the glass to a maximum value of about 100 N/mm for the GE composites and to a maximum of about 70 N/mm for the GEF composite system. Similarly, the displacements at failure () measured with a linear variable differential transformer (LVDT) were also found to be a strongly sensitive function of the type of reinforcement (GE or GEF) as well as the number of layers.

  7. Sub percolation threshold carbon nanotube based polyvinylidene fluoride polymer-polymer composites

    Science.gov (United States)

    Jacob, Cedric Antony

    The study of piezoelectric materials has traditionally focused largely on homogeneous crystalline or semi-crystalline materials. This research focuses on the concept of piezoelectric composites using selective microstructural reinforcement in the piezoelectric material to improve the piezoelectric properties. This is done using a polyvinylidene fluoride (PVDF) and carbon nanotube composite as the model system. A multi-tiered engineering approach is taken to understand the material (experimental and computational analyses) and design a composite system which provides an effective platform for future research in piezoelectric improvement. A finite element analysis is used to evaluate the ability of carbon nanotubes to generate a heterogeneous electric field where local improvements in electric field produce an increase in the effective piezoelectric strength. The study finds that weight percent and aspect ratio of the carbon nanotubes are of key importance while formations of percolating networks are detrimental to performance. This motivates investigation into electrospinning into a method of producing sub percolation threshold composites with large carbon nanotube content. However, the electrospun fabrics have too low of a dielectric strength to sustain high strength electric fields. This is studied within the context of high voltage physics and a solution inspired by traditional composites manufacturing is proposed wherein the electrospun fiber mat is used as the fiber reinforcing component of a polymer-polymer composite. This composite is thoroughly analyzed to show that it allows for a high dielectric strength combined with high carbon nanotube content. It is also shown that the PVDF contains the proper crystal structure to allow for piezoelectric properties. Furthermore, the addition of carbon nanotubes greatly improves the strength and stiffness of the composite, as well as affecting the internal electric field response to an applied voltage. These qualities

  8. High Strain Rate Deformation Modeling of a Polymer Matrix Composite. Part 2; Composite Micromechanical Model

    Science.gov (United States)

    Goldberg, Robert K.; Stouffer, Donald C.

    1998-01-01

    Recently applications have exposed polymer matrix composite materials to very high strain rate loading conditions, requiring an ability to understand and predict the material behavior under these extreme conditions. In this second paper of a two part report, a three-dimensional composite micromechanical model is described which allows for the analysis of the rate dependent, nonlinear deformation response of a polymer matrix composite. Strain rate dependent inelastic constitutive equations utilized to model the deformation response of a polymer are implemented within the micromechanics method. The deformation response of two representative laminated carbon fiber reinforced composite materials with varying fiber orientation has been predicted using the described technique. The predicted results compare favorably to both experimental values and the response predicted by the Generalized Method of Cells, a well-established micromechanics analysis method.

  9. Anisotropic magnetostrictive metal-polymer composites for functional devices

    Science.gov (United States)

    Kiseleva, T. Yu.; Zholudev, S. I.; Il'inykh, I. A.; Novakova, A. A.

    2013-12-01

    New metal-polymer composites based on mechanochemically synthesized magnetostrictive Fe-Ga phase particles with dimensions of up to 2 μm dispersed and spatially oriented in a polymer matrix have been studied. The polymer matrix for spatial anisotropic stabilization of particles was represented by modified polyurethane (PU). An increase in the magnetostrictive effect was achieved by directed orientation of particles in a magnetic field applied during polymerization of the PU matrix. The spatial anisotropy of the composite has been studied by the methods of conversion Mössbauer spectroscopy with resonant X-ray detection and scanning electron microscopy. It is shown that the mechanochemical synthesis is an effective method of obtaining particles with microstress-enhanced magnetostriction. The use of these particles for the formation of a functional elastomer composite provides a material with significant magnetostrictive effect, which can be several-fold increased due to orientation of particles in an applied magnetic field. The obtained anisotropic magnetostrictive composite is a promising material for the creation of smart functional components of positioning systems, attenuators, and sensors.

  10. Polymer sol-gel composite inverse opal structures.

    Science.gov (United States)

    Zhang, Xiaoran; Blanchard, G J

    2015-03-25

    We report on the formation of composite inverse opal structures where the matrix used to form the inverse opal contains both silica, formed using sol-gel chemistry, and poly(ethylene glycol), PEG. We find that the morphology of the inverse opal structure depends on both the amount of PEG incorporated into the matrix and its molecular weight. The extent of organization in the inverse opal structure, which is characterized by scanning electron microscopy and optical reflectance data, is mediated by the chemical bonding interactions between the silica and PEG constituents in the hybrid matrix. Both polymer chain terminus Si-O-C bonding and hydrogen bonding between the polymer backbone oxygens and silanol functionalities can contribute, with the polymer mediating the extent to which Si-O-Si bonds can form within the silica regions of the matrix due to hydrogen-bonding interactions.

  11. Preparation and properties of polymer and quantum dot composites

    Institute of Scientific and Technical Information of China (English)

    Tian Hongye; Shao Jun; He Rong; Gao Feng; Cui Daxiang; Gu Hongchen

    2006-01-01

    Quantum dots (QDs) were prepared in an organic system through a simple and low-cost wet chemistry method.Polymer beads with a diameter of 60-70 nm and specific functional groups were synthesized by a particular seeded emulsion polymerization technique.QDs were embedded in the polymer beads with the specific functional groups through dissolving and swelling method,which provided the condition for the conjunction of biomolecules and QDs as fluorescent probes.The prepared composites were characterized with UV-Vis,PL,TEM,FTIR,CLSM and conductance titration etc.The results show that QDs are successfully embedded in polymer beads,which breaks the limitation that the conjunction of biomolecules and QDs can be achieved only for those synthesized in aqueous system.

  12. Basalt fiber reinforced polymer composites: Processing and properties

    Science.gov (United States)

    Liu, Qiang

    A high efficiency rig was designed and built for in-plane permeability measurement of fabric materials. A new data derivation procedure to acquire the flow fluid pattern in the experiment was developed. The measurement results of the in-plane permeability for basalt twill 31 fabric material showed that a high correlation exists between the two principal permeability values for this fabric at 35% fiber volume fraction. This may be the most important scientific contribution made in this thesis. The results from radial measurements corresponded quite well with those from Unidirectional (UD) measurements, which is a well-established technique. No significant differences in mechanical properties were found between basalt fabric reinforced polymer composites and glass composites reinforced by a fabric of similar weave pattern. Aging results indicate that the interfacial region in basalt composites may be more vulnerable to environmental damage than that in glass composites. However, the basalt/epoxy interface may have been more durable than the glass/epoxy interface in tension-tension fatigue because the basalt composites have significantly longer fatigue life. In this thesis, chapter I reviews the literature on fiber reinforced polymer composites, with concentration on permeability measurement, mechanical properties and durability. Chapter II discusses the design of the new rig for in-plane permeability measurement, the new derivation procedure for monitoring of the fluid flow pattern, and the permeability measurement results. Chapter III compares the mechanical properties and durability between basalt fiber and glass fiber reinforced polymer composites. Lastly, chapter IV gives some suggestions and recommendations for future work.

  13. Shape memory-based tunable resistivity of polymer composites

    Science.gov (United States)

    Luo, Hongsheng; Zhou, Xingdong; Ma, Yuanyuan; Yi, Guobin; Cheng, Xiaoling; Zhu, Yong; Zu, Xihong; Zhang, Nanjun; Huang, Binghao; Yu, Lifang

    2016-02-01

    A conductive composite in bi-layer structure was fabricated by embedding hybrid nanofillers, namely carbon nanotubes (CNTs) and silver nanoparticles (AgNPs), into a shape memory polyurethane (SMPU). The CNT/AgNP-SMPU composites exhibited a novel tunable conductivity which could be facially tailored in wide range via the compositions or a specifically designed thermo-mechanical shape memory programming. The morphologies of the conductive fillers and the composites were investigated by scanning electron microscope (SEM). The mechanical and thermal measurements were performed by tensile tests and differential scanning calorimetry (DSC). By virtue of a specifically explored shape memory programming, the composites were stretched and fixed into different temporary states. The electrical resistivity (Rs) varied accordingly, which was able to be stabilized along with the shape fixing. Theoretical prediction based upon the tunneling model was performed. The Rs-strain curves of the composites with different compositions were well fitted. Furthermore, the relative resistivity and the Gauge factor along with the elongation were calculated. The influence of the compositions on the strain-dependent Rs was disclosed. The findings provided a new avenue to tailor the conductivity of the polymeric nano-composites by combining the composition method and a thermo-mechanical programming, which may greatly benefit the application of intelligent polymers in flexible electronics and sensors fields.

  14. New generation fiber reinforced polymer composites incorporating carbon nanotubes

    Science.gov (United States)

    Soliman, Eslam

    The last five decades observed an increasing use of fiber reinforced polymer (FRP) composites as alternative construction materials for aerospace and infrastructure. The high specific strength of FRP attracted its use as non-corrosive reinforcement. However, FRP materials were characterized with a relatively low ductility and low shear strength compared with steel reinforcement. On the other hand, carbon nanotubes (CNTs) have been introduced in the last decade as a material with minimal defect that is capable of increasing the mechanical properties of polymer matrices. This dissertation reports experimental investigations on the use of multi-walled carbon nanotubes (MWCNTs) to produce a new generation of FRP composites. The experiments showed significant improvements in the flexure properties of the nanocomposite when functionalized MWCNTs were used. In addition, MWCNTs were used to produce FRP composites in order to examine static, dynamic, and creep behavior. The MWCNTs improved the off-axis tension, off-axis flexure, FRP lap shear joint responses. In addition, they reduced the creep of FRP-concrete interface, enhanced the fracture toughness, and altered the impact resistance significantly. In general, the MWCNTs are found to affect the behaviour of the FRP composites when matrix failure dominates the behaviour. The improvement in the mechanical response with the addition of low contents of MWCNTs would benefit many industrial and military applications such as strengthening structures using FRP composites, composite pipelines, aircrafts, and armoured vehicles.

  15. Thermosetting Polymer-Matrix Composites for Strucutral Repair Applications

    Energy Technology Data Exchange (ETDEWEB)

    Goertzen, William Kirby [Iowa State Univ., Ames, IA (United States)

    2007-12-01

    Several classes of thermosetting polymer matrix composites were evaluated for use in structural repair applications. Initial work involved the characterization and evaluation of woven carbon fiber/epoxy matrix composites for structural pipeline repair. Cyanate ester resins were evaluated as a replacement for epoxy in composites for high-temperature pipe repair applications, and as the basis for adhesives for resin infusion repair of high-temperature composite materials. Carbon fiber/cyanate ester matrix composites and fumed silica/cyanate ester nanocomposites were evaluated for their thermal, mechanical, viscoelastic, and rheological properties as they relate to their structure, chemistry, and processing characteristics. The bisphenol E cyanate ester under investigation possesses a high glass transition temperature, excellent mechanical properties, and unique ambient temperature processability. The incorporate of fumed silica served to enhance the mechanical and rheological properties of the polymer and reduce thermal expansion without sacrificing glass transition or drastically altering curing kinetics. Characterization of the composites included dynamic mechanical analysis, thermomechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy.

  16. Electrochemical formation of a composite polymer-aluminum oxide film

    Science.gov (United States)

    Runge-Marchese, Jude Mary

    1997-10-01

    The formation of polymer films through electrochemical techniques utilizing electrolytes which include conductive polymer is of great interest to the coatings and electronics industries as a means for creating electrically conductive and corrosion resistant finishes. One of these polymers, polyamino-benzene (polyaniline), has been studied for this purpose for over ten years. This material undergoes an insulator-to-metal transition upon doping with protonic acids in an acid/base type reaction. Review of prior studies dealing with polyaniline and working knowledge of aluminum anodization has led to the development of a unique process whereby composite polymer-aluminum oxide films are formed. The basis for the process is a modification of the anodizing electrolyte which results in the codeposition of polyaniline during aluminum anodization. A second process, which incorporates electrochemical sealing of the anodic layer with polyaniline was also developed. The formation of these composite films is documented through experimental processing, and characterized by way of scientific analysis and engineering tests. Analysis results revealed the formation of unique dual phase anodic films with fine microstructures which exhibited full intrusion of the columnar aluminum oxide structure with polyaniline, indicating the polymer was deposited as the metal oxidation proceeded. An aromatic amine derivative of polyaniline with aluminum sulfate was determined to be the reaction product within the aluminum oxide phase of the codeposited films. Scientific characterization determined the codeposition process yields completely chemically and metallurgically bound composite films. Engineering studies determined the films, obtained through a single step, exhibited superior wear and corrosion resistance to conventionally anodized and sealed films processed through two steps, demonstrating the increased manufacturing process efficiency that can be realized with the modification of the

  17. Conducting polymer/carbon nanocoil composite electrodes for efficient supercapacitors

    KAUST Repository

    Baby, Rakhi Raghavan

    2012-01-01

    Herein, we report for the first time, conducting polymer (polyaniline (PANI) and polypyrrole (PPY)) coated carbon nanocoils (CNCs) as efficient binder-free electrode materials for supercapacitors. CNCs act as a perfect backbone for the uniform distribution of the conducting polymers in the composites. In two electrode configuration, the samples exhibited high specific capacitance with the values reaching up to 360 and 202 F g -1 for PANI/CNCs and PPY/CNCs respectively. The values obtained for specific capacitance and maximum storage energy per unit mass of the composites were found to be comparable to one of the best reported values for polymer coated multi-walled carbon nanotubes. In addition, the fabricated PANI/CNC based supercapacitors exhibited a high value of 44.61 Wh kg -1 for maximum storage energy per unit mass. Although the devices exhibit an initial capacitance loss due to the instability of the polymer, the specific capacitance stabilizes at a fixed value after 500 charge-discharge cycles. © 2012 The Royal Society of Chemistry.

  18. Photoresponsive Self-Healing Polymer Composite with Photoabsorbing Hybrid Microcapsules.

    Science.gov (United States)

    Gao, Lei; He, Jinliang; Hu, Jun; Wang, Chao

    2015-11-18

    Microcapsule-based self-healing polymer materials are highly desirable because they can heal large-volume cracks without changing the original chemical structures of polymers. However, they are limited by processing difficulties and inhomogeneous distributions of two components. Herein, we report a one-component photoresponsive self-healing polymer composite with photoabsorbing hybrid microcapsules (PAHM), which gives the microcapsules photoabsorbing properties by introducing nano-TiO2 particles as photoabsorbing and emulsified agents in the poly(urea-formaldehyde)/TiO2 hybrid shells. Upon mechanical damage and then exposure to light, the photoresponsive healing agents in the cracks will be solidified to allow for self-healing, while the healing agents in the unbroken PAHM will be protected and remain unreacted, which endows this photoresponsive microcapsule-based self-healing composite with self-healing properties like those found in the conventional two-component microcapsule-based systems. Given the universality of this hybrid polymerization method, incorporation of the photoabsorbing particles to conventional polymer shells may further broaden the scope of applications of these widely used materials.

  19. Nanocellulose in Polymer Composites and Biomedical: Research and Applications

    Energy Technology Data Exchange (ETDEWEB)

    Lu, Yuan [ORNL; Tekinalp, Halil L [ORNL; Peter, William H [ORNL; Eberle, Cliff [ORNL; Naskar, Amit K [ORNL; Ozcan, Soydan [ORNL

    2014-01-01

    Nanocellulose materials are nano-sized cellulose fibers or crystals that are produced by bacteria or derived from plants. These materials exhibit exceptional strength characteristics, light weight, transparency, and excellent biocompatibility. Compared to some other nanomaterials, nanocellulose is renewable and less expensive to produce. As such, a wide range of applications for nanocellulose has been envisioned. Most extensively studied areas include polymer composites and biomedical applications. Cellulose nanofibrils and nanocrystals have been used to reinforce both thermoplastic and thermoset polymers. Given the hydrophilic nature of these materials, the interfacial properties with most polymers are often poor. Various surface modification procedures have thus been adopted to improve the interaction between polymer matrix and cellulose nanofibrils or nanocrystals. In addition, the applications of nanocellulose as biomaterials have been explored including wound dressing, tissue repair, and medical implants. Nanocellulose materials for wound healing and periodontal tissue recovery have become commercially available, demonstrating the great potential of nanocellulose as a new generation of biomaterials. In this review, we highlight the applications of nanocellulose as reinforcing fillers for composites and the effect of surface modification on the mechanical properties as well as the application as biomaterials.

  20. Significantly elevated dielectric permittivity of Si-based semiconductor/polymer 2-2 composites induced by high polarity polymers

    Science.gov (United States)

    Feng, Yefeng; Gong, Honghong; Xie, Yunchuan; Wei, Xiaoyong; Zhang, Zhicheng

    2016-02-01

    To disclose the essential influence of polymer polarity on dielectric properties of polymer composites filled with semiconductive fillers, a series of Si-based semiconductor/polymer 2-2 composites in a series model was fabricated. The dielectric permittivity of composites is highly dependant on the polarity of polymer layers as well as the electron mobility in Si-based semiconductive sheets. The huge dielectric permittivity achieved in Si-based semiconductive sheets after being coated with high polarity polymer layers is inferred to originate from the strong induction of high polarity polymers. The increased mobility of the electrons in Si-based semiconductive sheets coated by high polarity polymer layers should be responsible for the significantly enhanced dielectric properties of composites. This could be facilely achieved by either increasing the polarity of polymer layers or reducing the percolative electric field of Si-based semiconductive sheets. The most promising 2-2 dielectric composite was found to be made of α-SiC with strong electron mobility and poly(vinyl alcohol) (PVA) with high polarity, and its highest permittivity was obtained as 372 at 100 Hz although the permittivity of α-SiC and PVA is 3-5 and 15, respectively. This work may help in the fabrication of high dielectric constant (high-k) composites by tailoring the induction effect of high polarity polymers to semiconductors.

  1. Polymer-Cement Composites Containing Waste Perlite Powder

    Directory of Open Access Journals (Sweden)

    Paweł Łukowski

    2016-10-01

    Full Text Available Polymer-cement composites (PCCs are materials in which the polymer and mineral binder create an interpenetrating network and co-operate, significantly improving the performance of the material. On the other hand, the need for the utilization of waste materials is a demand of sustainable construction. Various mineral powders, such as fly ash or blast-furnace slag, are successfully used for the production of cement and concrete. This paper deals with the use of perlite powder, which is a burdensome waste from the process of thermal expansion of the raw perlite, as a component of PCCs. The results of the testing of the mechanical properties of the composite and some microscopic observations are presented, indicating that there is a possibility to rationally and efficiently utilize waste perlite powder as a component of the PCC. This would lead to creating a new type of building material that successfully meets the requirements of sustainable construction.

  2. Thermal-vacuum response of polymer matrix composites in space

    Science.gov (United States)

    Tennyson, R. C.; Matthews, R.

    1993-01-01

    This report describes a thermal-vacuum outgassing model and test protocol for predicting outgassing times and dimensional changes for polymer matrix composites. Experimental results derived from 'control' samples are used to provide the basis for analytical predictions to compare with the outgassing response of Long Duration Exposure Facility (LDEF) flight samples. Coefficient of thermal expansion (CTE) data are also presented. In addition, an example is given illustrating the dimensional change of a 'zero' CTE laminate due to moisture outgassing.

  3. Solution electrospinning of particle-polymer composite fibres

    DEFF Research Database (Denmark)

    Christiansen, Lasse; Fojan, Peter

    2016-01-01

    Electrospinning is a fast, simple way to produce nano/microfibers, resulting in porous mats with a high surface to volume ratio. Another material with high surface to volume ratio is aerogel. A drawback of aerogels is its inherent mechanical weakness. To counteract this, aerogels can be embedded......-supporting abilities of these fibres are discussed. It is concluded that selfsupporting polymer/aerogel composites can be made by electrospinning....

  4. Electron Beam Curing of Polymer Matrix Composites - CRADA Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Janke, C. J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Howell, Dave [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Norris, Robert E. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    1997-05-01

    The major cost driver in manufacturing polymer matrix composite (PMC) parts and structures, and one of the elements having the greatest effect on their quality and performance, is the standard thermal cure process. Thermal curing of PMCs requires long cure times and high energy consumption, creates residual thermal stresses in the part, produces volatile toxic by-products, and requires expensive tooling that is tolerant of the high cure temperatures.

  5. APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY

    OpenAIRE

    Wiesław Kuczko; Radosław Wichniarek; Filip Górski; Paweł Buń; Przemysław Zawadzki

    2015-01-01

    The paper presents a method, developed by the authors, for manufacturing polymer composites with the matrix manufactured in a layered manner (via 3D printing – Fused Deposition Modeling) out of a thermoplastic material. As an example of practical application of this method, functional prototypes are presented, which were used as elements of foundry tooling – patterns for sand molding. In case of manufacturing prototype castings or short series of products, foundries usually cooperate with mod...

  6. Design of bioabsorbable, amorphous polymer networks and composites

    Energy Technology Data Exchange (ETDEWEB)

    Wiggins, J.S.

    1992-01-01

    Amorphous, crosslinked, bioabsorbable polymers have been developed as an alternative to conventional linear, semi-crystalline thermoplastic bioabsorbable polymers, and as matrix resins for totally bioabsorbable composites. Bioabsorbable composites have been fabricated, consisting of poly(glycolic acid) surgical mesh embedded in polyester and polyester-urethane based matrices. Low-molecular weight precursors used in the matrices of the composites were based on D, L-lactide and [epsilon]-caprolactone polyols, which were synthesized by coordination ring-opening polymerization using glycol initiators and stannous octoate as catalyst. Polymers initiated with diols were chain extended with fumaric acid for use as unsaturated polyester prepolymers, and were crosslinked using peroxide initiation. Polyester triols synthesized from glycerol initiation were crosslinked with L-lysine diisocyanate (LDI). Networks synthesized from D, L-lactide based precursors were more rigid with higher tensile strengths and moduli, while networks synthesized from [epsilon]-caprolactone were more flexible and elastomeric. Copolymer network properties were influenced by the relative amounts of each monomer incorporated into the copolymers. A composite based on neat poly(D, L-lactide-co-[epsilon]-caprolactone) fumarate displayed a tensile strength of 37 MPa and modulus of 107 MPa; addition of 25 wt% styrene yielded tensile strength and modulus of 64 MPa and 689 MPa, respectively. A silane coupling agent was shown to dramatically improve the fiber-matrix interfacial adhesion; tensile strength of a poly(D, L-lactide-co-glycolic acid) fumarate composite was increased from 84 to 92 MPa upon fiber pretreatment. Improved adhesion was also demonstrated using SEM. DSC revealed that if the glass transitions for the matrices was maintained at [approximately]60[degrees]C, the composites were easily shaped above this temperature, yet remained rigid at biological temperatures.

  7. Magnetoimpedance of cobalt-based amorphous ribbons/polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Semirov, A.V., E-mail: semirov@mail.ru [Irkutsk State University, Irkutsk (Russian Federation); Derevyanko, M.S.; Bukreev, D.A.; Moiseev, A.A.; Kudryavtsev, V.O. [Irkutsk State University, Irkutsk (Russian Federation); Safronov, A.P. [Ural Federal University, Yekaterinburg (Russian Federation)

    2016-10-01

    The combined influence of the temperature, the elastic tensile stress and the external magnetic field on the total impedance and impedance components were studied for rapidly quenched amorphous Co{sub 75}Fe{sub 5}Si{sub 4}B{sub 16} ribbons. Both as-cast amorphous ribbons and Co{sub 75}Fe{sub 5}Si{sub 4}B{sub 16}/polymer amorphous ribbon based composites were considered. Following polymer coverings were studied: modified rubber solution in o-xylene, solution of butyl methacrylate and methacrylic acid copolymer in isopropanol and solution of polymethylphenylsiloxane resin in toluene. All selected composites showed very good adhesion of the coverings and allowed to provide temperature measurements from 163 K up to 383 K under the applied deforming tensile force up to 30 N. The dependence of the modulus of the impedance and its components on the external magnetic field was influenced by the elastic tensile stresses and was affected by the temperature of the samples. It was shown that maximal sensitivity of the impedance and its components to the external magnetic field was observed at minimal temperature and maximal deforming force depended on the frequency of an alternating current. - Highlights: • Impedance and its components of amorphous Co{sub 75}Fe{sub 5}Si{sub 4}B{sub 16} ribbons were studied. • MI sensitivity to the magnetic field depends on a temperature and a deforming force. • Polymer covering can affect the functional properties of the composite.

  8. Polymer-matrix Composites for High-temperature Applications

    Directory of Open Access Journals (Sweden)

    P.D. Mangalgiri

    2005-04-01

    Full Text Available Over the last decade, applications of fibre-reinforced composites using polymer matrices have seen tremendous growth. In spite of the complexity of their behaviour and the unconventionalnature of fabrication and other aspects, the usage of such composites, even for primary loadbearing structures in military fighters and transport aircraft, and satellites and space vehicles has been beneficially realised. Most of such usage constituted structural applications (such as in airframe where service temperatures are not expected to he beyond 120 'C. Attention is now focussed on expanding the usage of such composites to other areas where temperatures could be higher-in the range 200400 "C. The intended applications are structural and non-structural parts on or around the aero-engines and airframe components for supersonic or hypersonic aircraft. The development of polymer matrices-such as bismaleimides, polyimides, cyanates, and liquid crystalline polymers and others-has brought such applications within the realm of practicability. The associated problems have been in terms of suitable processing technologies and in balancing the requirements of the performance with those of the processing. This paper describes briefly such developments and reviews the potential application scenario.

  9. Application of atmospheric pressure plasma in polymer and composite adhesion

    Science.gov (United States)

    Yu, Hang

    An atmospheric pressure helium and oxygen plasma was used to investigate surface activation and bonding in polymer composites. This device was operated by passing 1.0-3.0 vol% of oxygen in helium through a pair of parallel plate metal electrodes powered by 13.56 or 27.12 MHz radio frequency power. The gases were partially ionized between the capacitors where plasma was generated. The reactive species in the plasma were carried downstream by the gas flow to treat the substrate surface. The temperature of the plasm gas reaching the surface of the substrate did not exceed 150 °C, which makes it suitable for polymer processing. The reactive species in the plasma downstream includes ~ 1016-1017 cm-3 atomic oxygen, ~ 1015 cm-3 ozone molecule, and ~ 10 16 cm-3 metastable oxygen molecule (O2 1Deltag). The substrates were treated at 2-5 mm distance from the exit of the plasma. Surface properties of the substrates were characterized using water contact angle (WCA), atomic force microscopy (AFM), infrared spectroscopy (IR), and X-ray photoelectron spectroscopy (XPS). Subsequently, the plasma treated samples were bonded adhesively or fabricated into composites. The increase in mechanical strength was correlated to changes in the material composition and structure after plasma treatment. The work presented hereafter establishes atmospheric pressure plasma as an effective method to activate and to clean the surfaces of polymers and composites for bonding. This application can be further expanded to the activation of carbon fibers for better fiber-resin interactions during the fabrication of composites. Treating electronic grade FR-4 and polyimide with the He/O2 plasma for a few seconds changed the substrate surface from hydrophobic to hydrophilic, which allowed complete wetting of the surface by epoxy in underfill applications. Characterization of the surface by X-ray photoelectron spectroscopy shows formation of oxygenated functional groups, including hydroxyl, carbonyl, and

  10. Inner demagnetization factor in polymer-bonded soft magnetic composites

    Energy Technology Data Exchange (ETDEWEB)

    Anhalt, M. [Faculty of Natural and Materials Science, Clausthal University of Technology, Robert-Koch-Str. 42, 38678 Clausthal-Zellerfeld (Germany)], E-mail: mathias.anhalt@tu-clausthal.de; Weidenfeller, B. [Faculty of Natural and Materials Science, Clausthal University of Technology, Robert-Koch-Str. 42, 38678 Clausthal-Zellerfeld (Germany); Mattei, J.-L. [Laboratoire d' Electronique et des Systemes de Telecommunications (UMR CNRS 6616), UFR Sciences, 6, Avenue Le Gorgeu CS 93837, 29238 Brest (France)

    2008-10-15

    The inner demagnetization factor N{sub i} of polymer-bonded soft magnetic composites (PBSMC) varying in filler material and filler content C was measured, using a computer-controlled measurement system. For all materials the results show a decrease from an inner demagnetization factor close to the demagnetization factor of a single particle to N{sub i}{approx}0 on increasing the magnetic content C. Measurement data of a selected material were compared with a model derived from an effective medium theory using the composite's effective susceptibility and show superb accordance.

  11. Peculiarities of Shape Recovery in Polymer Composites with Compacting Filler

    Directory of Open Access Journals (Sweden)

    V. A. Beloshenko

    2011-01-01

    Full Text Available Peculiarities of the shape memory effect development in composites based on the epoxy polymer and various fillers, such as thermoexpanded graphite, aerosils, metallized graphite, and basalt flakes, have been investigated. It has been determined that straining followed by the shape recovery of composites is accompanied by changes in their volume. Extent and character of the changes depend on the ability of fillers to compaction under pressure, deformation scheme, adsorption ability of the filler. It is shown that the combined deformation consisting of compression and stretching of specimens in different sequence gives structural states for which the longitudinal strain-transverse strain ratio can take zero, positive, or negative values.

  12. Fabrication of a nanostructured gold-polymer composite material.

    Science.gov (United States)

    Mallick, K; Witcomb, M; Scurrell, M

    2006-07-01

    A facile synthesis route is described for the preparation of a poly-(o-aminophenol)-gold nanoparticle composite material by polymerization of o-aminophenol (AP) monomer using HAuCl(4) as the oxidant. The synthesis was carried out in a methanol medium so that it could serve a dual solvent role, a solvent for both the AP and the water solution of HAuCl(4). It was found that oxidative polymerization of AP leads to the formation of poly-AP with a diameter of 50+/-10nm, while the reduction of AuCl(4) (-) results in the formation of gold nanoparticles ( approximately 2nm). The gold nanoparticles were uniformly dispersed and highly stabilized throughout the macromolecular chain that formed a uniform metal-polymer composite material. The resultant composite material was characterized by means of different techniques, such as UV-vis, IR and Raman spectroscopy, which offered the information about the chemical structure of polymer, whereas electron microscopy images provided information regarding the morphology of the composite material and the distribution of the metal particles in the composite material.

  13. Investigation of tribological properties of biobased polymers and polymeric composites

    Science.gov (United States)

    Bhuyan, Satyam Kumar

    Worldwide potential demands for replacing petroleum derived raw materials with renewable plant-based ones in the production of valuable polymeric materials and composites are quite significant from the social and environmental standpoints. Therefore, using low-cost renewable resources has deeply drawn the attention of many researchers. Among them, natural oils are expected to be ideal alternative feedstock since oils, derived from plant and animal sources, are found in profusion in the world. The important feature of these types of materials is that they can be designed and tailored to meet different requirements. The real challenge lies in finding applications which would use sufficiently large quantities of these materials allowing biodegradable polymers to compete economically in the market. Lack of material and tribological characterizations have created an awareness to fulfill this essential objective. In order to understand the viability of biobased polymers in structural applications, this thesis work elucidates the study of friction and wear characteristics of polymers and polymeric composites made out of natural oil available profusely in plants and animals. The natural oils used in this study were soybean and tung oil. Various monomeric components like styrene, divinely benzene etc. were used in the synthesis of biobased polymers through Rh-catalyzed isomerization techniques. For the different polymeric composites, spent germ, a byproduct of ethanol production, is used as the filler and an organoclay called montmorillonite is used as the reinforcing agent in the polymer matrix. The effect of crosslinker concentration, filler composition and reinforcement agent concentration was studied under dry sliding. A ball-on-flat tribometer with a probe made out of steel, silicon nitride or diamond was used for most of the experimental work to measure friction and generate wear. The wear tracks were quantified with an atomic force microscope and a contact

  14. SURFACE MORPHOLOGY OF CARBON FIBER POLYMER COMPOSITES AFTER LASER STRUCTURING

    Energy Technology Data Exchange (ETDEWEB)

    Sabau, Adrian S [ORNL; Chen, Jian [ORNL; Jones, Jonaaron F. [University of Tennessee (UT); Alexandra, Hackett [University of Tennessee (UT); Jellison Jr, Gerald Earle [ORNL; Daniel, Claus [ORNL; Warren, Charles David [ORNL; Rehkopf, Jackie D. [Plasan Carbon Composites

    2015-01-01

    The increasing use of Carbon Fiber Polymer Composite (CFPC) as a lightweight material in automotive and aerospace industries requires the control of surface morphology. In this study, the composites surface was prepared by ablating the resin in the top fiber layer of the composite using an Nd:YAG laser. The CFPC specimens with T700S carbon fiber and Prepreg - T83 resin (epoxy) were supplied by Plasan Carbon Composites, Inc. as 4 ply thick, 0/90o plaques. The effect of laser fluence, scanning speed, and wavelength was investigated to remove resin without an excessive damage of the fibers. In addition, resin ablation due to the power variation created by a laser interference technique is presented. Optical property measurements, optical micrographs, 3D imaging, and high-resolution optical profiler images were used to study the effect of the laser processing on the surface morphology.

  15. Inorganic Polymer Matrix Composite Strength Related to Interface Condition

    Directory of Open Access Journals (Sweden)

    John Bridge

    2009-12-01

    Full Text Available Resin transfer molding of an inorganic polymer binder was successfully demonstrated in the preparation of ceramic fiber reinforced engine exhaust valves. Unfortunately, in the preliminary processing trials, the resulting composite valves were too brittle for in-engine evaluation. To address this limited toughness, the effectiveness of a modified fiber-matrix interface is investigated through the use of carbon as a model material fiber coating. After sequential heat treatments composites molded from uncoated and carbon coated fibers are compared using room temperature 3-point bend testing. Carbon coated Nextel fiber reinforced geopolymer composites demonstrated a 50% improvement in strength, versus that of the uncoated fiber reinforced composites, after the 250 °C postcure.

  16. Progressive fracture of polymer matrix composite structures: A new approach

    Science.gov (United States)

    Chamis, C. C.; Murthy, P. L. N.; Minnetyan, L.

    1992-01-01

    A new approach independent of stress intensity factors and fracture toughness parameters has been developed and is described for the computational simulation of progressive fracture of polymer matrix composite structures. The damage stages are quantified based on physics via composite mechanics while the degradation of the structural behavior is quantified via the finite element method. The approach account for all types of composite behavior, structures, load conditions, and fracture processes starting from damage initiation, to unstable propagation and to global structural collapse. Results of structural fracture in composite beams, panels, plates, and shells are presented to demonstrate the effectiveness and versatility of this new approach. Parameters and guidelines are identified which can be used as criteria for structural fracture, inspection intervals, and retirement for cause. Generalization to structures made of monolithic metallic materials are outlined and lessons learned in undertaking the development of new approaches, in general, are summarized.

  17. Studies on natural fiber reinforced polymer matrix composites

    Science.gov (United States)

    Patel, R. H.; Kapatel, P. M.; Machchhar, A. D.; Kapatel, Y. A.

    2016-05-01

    Natural fiber reinforced composites show increasing importance in day to days applications because of their low cost, lightweight, easy availability, non-toxicity, biodegradability and environment friendly nature. But these fibers are hydrophilic in nature. Thus they have very low reactivity and poor compatibility with polymers. To overcome these limitations chemical modifications of the fibers have been carried out. Therefore, in the present work jute fibers have chemically modified by treating with sodium hydroxide (NaOH) solutions. These treated jute fibers have been used to fabricate jute fiber reinforced epoxy composites. Mechanical properties like tensile strength, flexural strength and impact strength have been found out. Alkali treated composites show better properties compare to untreated composites.

  18. Objective Surface Evaluation of Fiber Reinforced Polymer Composites

    Science.gov (United States)

    Palmer, Stuart; Hall, Wayne

    2013-08-01

    The mechanical properties of advanced composites are essential for their structural performance, but the surface finish on exterior composite panels is of critical importance for customer satisfaction. This paper describes the application of wavelet texture analysis (WTA) to the task of automatically classifying the surface finish properties of two fiber reinforced polymer (FRP) composite construction types (clear resin and gel-coat) into three quality grades. Samples were imaged and wavelet multi-scale decomposition was used to create a visual texture representation of the sample, capturing image features at different scales and orientations. Principal components analysis was used to reduce the dimensionality of the texture feature vector, permitting successful classification of the samples using only the first principal component. This work extends and further validates the feasibility of this approach as the basis for automated non-contact classification of composite surface finish using image analysis.

  19. Thin Film Polymer Composite Scintillators for Thermal Neutron Detection

    Directory of Open Access Journals (Sweden)

    Andrew N. Mabe

    2013-01-01

    Full Text Available Thin film polystyrene composite scintillators containing LiF6 and organic fluors have been fabricated and tested as thermal neutron detectors. Varying fluorescence emission intensities for different compositions are interpreted in terms of the Beer-Lambert law and indicate that the sensitivity of fluorescent sensors can be improved by incorporating transparent particles with refractive index different than that of the polymer matrix. Compositions and thicknesses were varied to optimize the fluorescence and thermal neutron response and to reduce gamma-ray sensitivity. Neutron detection efficiency and neutron/gamma-ray discrimination are reported herein as functions of composition and thickness. Gamma-ray sensitivity is affected largely by changing thickness and unaffected by the amount of LiF6 in the film. The best neutron/gamma-ray discrimination characteristics are obtained for film thicknesses in the range 25–150 μm.

  20. Thermal conductivity of polymer composites with oriented boron nitride

    Energy Technology Data Exchange (ETDEWEB)

    Ahn, Hong Jun; Eoh, Young Jun [Department of Materials Engineering, Kyonggi University, Suwon (Korea, Republic of); Park, Sung Dae [Electronic Materials and Device Research Center, Korea Electronics Technology Institute, Seongnam (Korea, Republic of); Kim, Eung Soo, E-mail: eskim@kyonggi.ac.kr [Department of Materials Engineering, Kyonggi University, Suwon (Korea, Republic of)

    2014-08-20

    Highlights: • Thermal conductivity depended on the orientation of BN in the polymer matrices. • Hexagonal boron nitride (BN) particles were treated by C{sub 27}H{sub 27}N{sub 3}O{sub 2} and C{sub 14}H{sub 6}O{sub 8}. • Amphiphilic-agent-treated BN particles are more easily oriented in the composite. • BN/PVA composites with C{sub 14}H{sub 6}O{sub 8}-treated BN showed the highest thermal conductivity. • Thermal conductivity of the composites was compared with several theoretical models. - Abstract: Thermal conductivity of boron nitride (BN) with polyvinyl alcohol (PVA) and/or polyvinyl butyral (PVB) was investigated as a function of the degree of BN orientation, the numbers of hydroxyl groups in the polymer matrices and the amphiphilic agents used. The composites with in-plane orientation of BN showed a higher thermal conductivity than the composites with out-of-plane orientation of BN due to the increase of thermal pathway. For a given BN content, the composites with in-plane orientation of BN/PVA showed higher thermal conductivity than the composites with in-plane orientation of BN/PVB. This result could be attributed to the improved degree of orientation of BN, caused by a larger number of hydroxyl groups being present. Those treated with C{sub 14}H{sub 6}O{sub 8} amphiphilic agent demonstrated a higher thermal conductivity than those treated by C{sub 27}H{sub 27}N{sub 3}O{sub 2}. The measured thermal conductivity of the composites was compared with that predicted by the several theoretical models.

  1. Polymer Composite and Nanocomposite Dielectric Materials for Pulse Power Energy Storage

    Directory of Open Access Journals (Sweden)

    Hans-Conrad zur Loye

    2009-10-01

    Full Text Available This review summarizes the current state of polymer composites used as dielectric materials for energy storage. The particular focus is on materials: polymers serving as the matrix, inorganic fillers used to increase the effective dielectric constant, and various recent investigations of functionalization of metal oxide fillers to improve compatibility with polymers. We review the recent literature focused on the dielectric characterization of composites, specifically the measurement of dielectric permittivity and breakdown field strength. Special attention is given to the analysis of the energy density of polymer composite materials and how the functionalization of the inorganic filler affects the energy density of polymer composite dielectric materials.

  2. Directed colloidal assembly and characterization of PZT-polymer composites

    Science.gov (United States)

    Smay, James Earl

    Lead zirconate titanate (PZT)-based layers and 3-D structures were directly assembled using two colloidal routes: (1) tape casting and (2) a layer-by-layer robotic deposition technique, known as robocasting. First, concentrated (φsolids > 0.45) suspensions of PZT-5H and a latex emulsion were tape cast with the aid of viscosifier and surfactant additions. Drying stress evolved to a maximum at φ PZT ˜ 0.49, followed by a reduction and a secondary stress rise attributed to latex coalescence. Dielectric and piezoelectric properties of sintered PZT multilayer laminates exhibited good agreement with those for isostatically pressed and sintered samples. Concentrated, weakly gelled suspensions of PZT 95/5 and poly(ethylene) (PE) latices, a fugitive species, were developed as inks for the robotic deposition of monolithic and tri-layered composite structures. Monoliths, with densities of 93.6% and 96.1%, and composites with a 96.1% dense layer between 93.6% regions were fabricated. The structures displayed equivalent electrical properties to cold isostatically pressed parts. The composites withstood repeated saturation polarization switching as well as a 500 MPa hydrostatic pressure-induced poled ferroelectric (FE) to antiferroelectric (AFE) phase transformation. Concentrated (φPZT = 0.47) PZT-5H gels were developed as inks for the robotic deposition of 3-D, mesoscale periodic structures with self-supporting features such as lattices of rod-like elements and v-shaped test structures. The gels exhibited pH dependent viscoelastic properties and Hershel-Bulkley flow behavior. The deflection of as-deposited spanning elements was measured using laser profilometry. Flow modeling and shape evolution data indicated a core-shell architecture as the ink exited the deposition nozzle, which simultaneously provided strength to form spanning elements and good bonding between layers. The core grew rapidly (˜1s) due to the quick recovery of gel structure in these inks. 3-X type PZT-polymer

  3. Design of a biomimetic polymer-composite hip prosthesis.

    Science.gov (United States)

    Bougherara, Habiba; Bureau, Martin; Campbell, Melissa; Vadean, Aurelian; Yahia, L'Hocine

    2007-07-01

    A new biomimetic composite hip prosthesis (stem) was designed to obtain properties similar to those of the contiguous bone, in particular stiffness, to allow normal loading of the surrounding femoral bone. This normal loading would reduce excessive stress shielding, known to result in bone loss, and micromotions at the bone-implant interface, leading to aseptic prosthetic loosening. The design proposed is based on a hollow substructure made of hydroxyapatite-coated, continuous carbon fiber (CF) reinforced polyamide 12 (PA12) composite with an internal soft polymer-based core. Different composite configurations were studied to match the properties of host tissue. Nonlinear three-dimensional analysis of the hip prosthesis was carried out using a three-dimensional finite element bone model based on the composite femur. The performance of composite-based hip and titanium alloy-based (Ti-6Al-4V) stems embedded into femoral bone was compared. The effect of core stiffness and ply configuration was also analyzed. Results show that stresses in composite stem are lower than those in Ti stem, and that the femoral bone implanted with composite structure sustains more load than the one implanted with Ti stem. Micromotions in the composite stem are significantly smaller than those in Ti stem over the entire bone-implant surface because of the favorable interfacial stress distribution.

  4. Shape memory-based tunable resistivity of polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Luo, Hongsheng, E-mail: hongshengluo@163.com [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Zhou, Xingdong; Ma, Yuanyuan [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Yi, Guobin, E-mail: ygb116@163.com [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Cheng, Xiaoling [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China); Zhu, Yong [Shanghai Hiend Polyurethane Inc., No. 389, Jinshan District, Shanghai (China); Zu, Xihong; Zhang, Nanjun; Huang, Binghao; Yu, Lifang [Faculty of Chemical Engineering and Light Industry, Guangdong University of Technology, Guangzhou 510006 (China)

    2016-02-15

    Graphical abstract: Hybrid nanofillers of the CNTs and AgNPs were embedded into a shape memory polyurethane. The composites exhibited tunable conduction, which could be facially tailored by the compositions and the thermal–mechanical programming. - Highlights: • Electrically conductive polymer composites in bi-layer structure were fabricated. • The CNTs/AgNPs layer had influence on the mechanics and thermal transitions. • The conductivity could be facially tailored via a thermo-mechanical programming. • The AgNPs contents enlarged the gauge factor of the resistivity–strain curves. • Tunneling theory was suitable for simulating the strain-dependent behaviors. - Abstract: A conductive composite in bi-layer structure was fabricated by embedding hybrid nanofillers, namely carbon nanotubes (CNTs) and silver nanoparticles (AgNPs), into a shape memory polyurethane (SMPU). The CNT/AgNP-SMPU composites exhibited a novel tunable conductivity which could be facially tailored in wide range via the compositions or a specifically designed thermo-mechanical shape memory programming. The morphologies of the conductive fillers and the composites were investigated by scanning electron microscope (SEM). The mechanical and thermal measurements were performed by tensile tests and differential scanning calorimetry (DSC). By virtue of a specifically explored shape memory programming, the composites were stretched and fixed into different temporary states. The electrical resistivity (R{sub s}) varied accordingly, which was able to be stabilized along with the shape fixing. Theoretical prediction based upon the tunneling model was performed. The R{sub s}–strain curves of the composites with different compositions were well fitted. Furthermore, the relative resistivity and the Gauge factor along with the elongation were calculated. The influence of the compositions on the strain-dependent R{sub s} was disclosed. The findings provided a new avenue to tailor the conductivity

  5. Compositional and sensory characterization of red wine polymers.

    Science.gov (United States)

    Wollmann, Nadine; Hofmann, Thomas

    2013-03-06

    After isolation from red wine by means of ultrafiltration and gel adsorption chromatography, the composition of the highly astringent tasting high-molecular weight polymers was analyzed by means of HPLC-MS/MS, HPLC-UV/vis, and ion chromatography after thiolytic, alkaline, and acidic depolymerization and, on the basis of the quantitative data obtained as well as model incubation experiments, key structural features of the red wine polymers were proposed. The structural backbone of the polymers seems to be comprised of a procyanidin chain with (-)-epicatechin, (+)-catechin, (-)-epicatechin-3-O-gallate units as extension and terminal units as well as (-)-epigallocatechin as extension units. In addition, acetaldehyde was shown to link different procyanidins at the A-ring via an 1,1-ethylene bridge and anthocyanins and pyranoanthocyanins were found to be linked to the procyanidin backbone via a C-C-linkage at position C(6) or C(8), respectively. Alkaline hydrolysis demonstrated the polymeric procyanidins to be esterified with various organic acids and phenolic acids, respectively. In addition, the major part of the polysaccharides present in the red wine polymeric fraction were found not to be covalently linked to procyanidins. Interestingly, sensory evaluation of individual fractions of the red wine polymers did not show any significant difference in the astringent threshold concentrations, nor in the astringency intensity in supra-threshold concentrations and demonstrated the mean degree of polymerization as well as the galloylation degree not to have an significant influence on the astringency perception.

  6. Nanodiamond-polymer nanoparticle composites and their thin films

    Science.gov (United States)

    Attia, N. F.; Rao, J. P.; Geckeler, K. E.

    2014-04-01

    Nanodiamonds obtained from detonation processes have received a great deal of attention during the past decades because of their unique properties and applications. The dispersion of nanodiamond particles can be achieved by different methods including the use of polymer nanoparticles. Here, we describe the dispersion of nanodiamonds in conjunction with sonication using poly(vinylpyrrolidone) nanoparticles with a particle size range of 23.3-61.3 nm, providing a good, economic, and efficient method for the dispersion. The average particle size was found to be 37.5 nm, as confirmed by transmission electron microscopy. The interaction between the nanodiamonds and polymer nanoparticles was characterized by FTIR spectroscopy and the effect of the polymer nanoparticle concentration, sonication time, and frequency on the dispersion process of nanodiamonds is highlighted. In addition, we prepared thin films of nanodiamond-polymer composites with different nanodiamond contents that showed good nanodiamond dispersion. The thin film can act as a UV filter and is transparent in the visible region. The thin films of nanodiamond-poly(vinylpyrrolidone) nanoparticles were characterized by SEM and UV-Vis spectroscopy.

  7. Novel composite polymer electrolyte for lithium air batteries

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Deng; Li, Ruoshi; Huang, Tao; Yu, Aishui [Department of Chemistry, Shanghai Key Laboratory of Molecular Catalysis and Innovative Materials, Institute of New Energy, Fudan University, 220 Handan Road, Shanghai 200433 (China)

    2010-02-15

    Hydrophobic ionic liquid-silica-PVdF-HFP polymer composite electrolyte is synthesized and employed in lithium air batteries for the first time. Discharge performance of lithium air battery using this composite electrolyte membrane in ambient atmosphere shows a higher capacity of 2800 mAh g{sup -1} of carbon in the absence of O{sub 2} catalyst, whereas, the cell with pure ionic liquid as electrolyte delivers much lower discharge capacity of 1500 mAh g{sup -1}. When catalyzed by {alpha}-MnO{sub 2}, the initial discharge capacity of the cell with composite electrolyte can be extended to 4080 mAh g{sup -1} of carbon, which can be calculated as 2040 mAh g{sup -1} associated with the total mass of the cathode. The flat discharge plateau and large discharge capacity indicate that the hydrophobic ionic liquid-silica-PVdF-HFP polymer composite electrolyte membrane can effectively protect lithium from moisture invasion. (author)

  8. Field emission properties of a graphene/polymer composite.

    Science.gov (United States)

    Patole, Shashikant P; Lee, Jong Hak; Park, Jae Hong; Yu, Seong Man; Makotchenko, V G; Nazarov, A S; Fedorov, V E; Shin, Dong Wook; Alegaonkar, Prashant S; More, Mahendra A; Yoo, Ji-Beom

    2013-11-01

    Thin graphene/polymer sheet composites were fabricated using easily soluble expanded graphite (ESEG), and their field emission (FE) parameters were examined. Due to the high dispersability of ESEG, a stable graphene suspension was prepared by ultrasonication in toluene without the need for a surfactant. The suspension consisted of exfoliated graphene sheets with a thickness of 1 - 2 nm. Using a calendering process, the solution was further shear mixed with ethyl cellulose to obtain a well-dispersed graphene/polymer composite. The composite was screen printed onto a conducing substrate to fabricate the FE cathode layers. The FE measurements were taken in a diode configuration at an applied electrostatic field and inter-electrode distance of 1.7 to 6 V/microm and approximately 200 microm, respectively. The threshold turn-on-field was approximately 3.5 V/microm at a current density of approximately 10 microA/cm2 with a corresponding mean field enhancement factor of 1350 +/- 50. Emission occurred mainly from the edges and bends of the graphene layers. The luminescence uniformity of the composite cathode layers was examined using a phosphor-coated anode.

  9. COMPOSITION AND STRUCTURAL STUDIES OF STRONG GLOW DISCHARGE POLYMER COATINGS

    Energy Technology Data Exchange (ETDEWEB)

    CZECHOWICZ, DG; CASTILLO, ER; NIKROO, A

    2002-04-01

    OAK A271 COMPOSITION AND STRUCTURAL STUDIES OF STRONG GLOW DISCHARGE POLYMER COATINGS. An investigation of the chemical composition and structure of strong glow discharge (GDP) polymer shells made for cryogenic experiments at OMEGA is described. The investigation was carried out using combustion and Fourier Transform Infrared Spectroscopy (FTIR) analysis. The strongest coatings were observed to have the lowest hydrogen content or hydrogen/carbon H/C ratio, whereas the weakest coatings had the highest hydrogen content or H/C ratio. Chemical composition results from combustion were used to complement FTIR analysis to determine the relative hydrogen content of as-fabricated coatings. Good agreement was observed between composition results obtained from combustion and FTIR analysis. FTIR analysis of coating structures showed the strongest coatings to have less terminal methyl groups and a more double bond or olefinic structure. Strong GDP coatings that were aged in air react more with oxygen and moisture than standard GDP coatings. In addition to a more olefinic structure, there may also be more free-radial sites present in strong GDP coatings, which leads to greater oxygen uptake.

  10. Thermal diffusivity and mechanical properties of polymer matrix composites

    Science.gov (United States)

    Weidenfeller, Bernd; Anhalt, Mathias; Kirchberg, Stefan

    2012-11-01

    Polypropylene-iron-silicon (FeSi) composites with spherical particles and filler content from 0 vol. % to 70 vol. % are prepared by kneading and injection molding. Modulus, crystallinity, and thermal diffusivity of samples are characterized with dynamic mechanical analyzer, differential scanning calorimeter, and laser flash method. Modulus as well as thermal diffusivity of the composites increase with filler fraction while crystallinity is not significantly affected. Measurement values of thermal diffusivity are close to the lower bound of the theoretical Hashin-Shtrikman model. A model interconnectivity shows a poor conductive network of particles. From measurement values of thermal diffusivity, the mean free path length of phonons in the amorphous and crystalline structure of the polymer and in the FeSi particles is estimated to be 0.155 nm, 0.450 nm, and 0.120 nm, respectively. Additionally, the free mean path length of the temperature conduction connected with the electrons in the FeSi particles together with the mean free path in the particle-polymer interface was estimated. The free mean path is approximately 5.5 nm and decreases to 2.5 nm with increasing filler fraction, which is a result of the increasing area of polymer-particle interfaces. A linear dependence of thermal diffusivity with the square root of the modulus independent on the measurement temperature in the range from 300 K to 415 K was found.

  11. Anisotropic thermal property of magnetically oriented carbon nanotube polymer composites

    Science.gov (United States)

    Li, Bin; Dong, Shuai; Wang, Caiping; Wang, Xiaojie; Fang, Jun

    2016-04-01

    This paper proposes a method for preparing multi-walled carbon nanotubea/polydimethylsiloxane (MWCNTs/PDMS) composites with enhanced thermal properties by using a high magnetic field (up to 10T). The MWCNT are oriented magnetically inside a silicone by in-situ polymerization method. The anisotropic structure would be expected to produce directional thermal conductivity. This study will provide a new approach to the development of anisotropic thermal-conductive polymer composites. Systematic studies with the preparation of silicone/graphene composites corresponding to their thermal and mechanical properties are carried out under various conditions: intensity of magnetic field, time, temperature, fillings. The effect of MWCNT/graphene content and preparation procedures on thermal conductivity of composites is investigated. Dynamic mechanical analysis (DMA) is used to reveal the mechanical properties of the composites in terms of the filling contents and magnetic field strength. The scanning electron microscope (SEM) is used to observe the micro-structure of the MWCNT composites. The alignment of MWCNTs in PDMS matrix is also studied by Raman spectroscopy. The thermal conductivity measurements show that the magnetically aligned CNT-composites feature high anisotropy in thermal conductivity.

  12. Long fiber polymer composite property calculation in injection molding simulation

    Science.gov (United States)

    Jin, Xiaoshi; Wang, Jin; Han, Sejin

    2013-05-01

    Long fiber filled polymer composite materials have attracted a great attention and usage in recent years. However, the injection and compression molded long fiber composite materials possess complex microstructures that include spatial variations in fiber orientation and length. This paper presents the recent implemented anisotropic rotary diffusion - reduced strain closure (ARD-RSC) model for predicting fiber orientation distribution[1] and a newly developed fiber breakage model[2] for predicting fiber length distribution in injection and compression molding simulation, and Eshelby-Mori-Tanaka model[3,4] with fiber-matrix de-bonding model[5] have been implemented to calculate the long fiber composite property distribution with predicted fiber orientation and fiber length distributions. A validation study on fiber orientation, fiber breakage and mechanical property distributions are given with injection molding process simulation.

  13. Charge Transport in Carbon Nanotubes-Polymer Composite Photovoltaic Cells

    Directory of Open Access Journals (Sweden)

    Joel Davenas

    2009-06-01

    Full Text Available We investigate the dark and illuminated current density-voltage (J/V characteristics of poly(2-methoxy-5-(2’-ethylhexyloxy1-4-phenylenevinylene (MEH-PPV/single-walled carbon nanotubes (SWNTs composite photovoltaic cells. Using an exponential band tail model, the conduction mechanism has been analysed for polymer only devices and composite devices, in terms of space charge limited current (SCLC conduction mechanism, where we determine the power parameters and the threshold voltages. Elaborated devices for MEH-PPV:SWNTs (1:1 composites showed a photoresponse with an open-circuit voltage Voc of 0.4 V, a short-circuit current density JSC of 1 µA/cm² and a fill factor FF of 43%. We have modelised the organic photovoltaic devices with an equivalent circuit, where we calculated the series and shunt resistances.

  14. Nano-Fiber Reinforced Enhancements in Composite Polymer Matrices

    Science.gov (United States)

    Chamis, Christos C.

    2009-01-01

    Nano-fibers are used to reinforce polymer matrices to enhance the matrix dependent properties that are subsequently used in conventional structural composites. A quasi isotropic configuration is used in arranging like nano-fibers through the thickness to ascertain equiaxial enhanced matrix behavior. The nano-fiber volume ratios are used to obtain the enhanced matrix strength properties for 0.01,0.03, and 0.05 nano-fiber volume rates. These enhanced nano-fiber matrices are used with conventional fiber volume ratios of 0.3 and 0.5 to obtain the composite properties. Results show that nano-fiber enhanced matrices of higher than 0.3 nano-fiber volume ratio are degrading the composite properties.

  15. Probabilistic Evaluation of Bolted Joints in Polymer Matrix Composites

    Science.gov (United States)

    Chamis, C. C.; Minnetyan, L.

    1997-01-01

    Computational methods are described to probabilistically simulate fracture in bolted composite structures. Progressive fracture is simulated via an innovative approach independent of stress intensity factors and fracture toughness. The effect on structure damage of design variable uncertainties is quantified. The Fast Probability Integrator is used to assess the scatter in the composite structure response before and after damage. Sensitivity of the response to design variables is evaluated. The methods are demonstrated for bolted joint polymer matrix composite panels under end loads. The effects of fabrication process are included in the simulation of damage in the bolted panel. The results show that the most effective way to reduce the end displacement at fracture is to control the load and ply thickness.

  16. Preparation of graphene/polymer composite photocathode for QDSSC

    Science.gov (United States)

    Wang, Qiandi; Shen, Yue; Tan, Jie; Xu, Kai; Shen, Tan; Cao, Meng; Gu, Feng; Wang, Linjun

    2013-12-01

    Graphene (rGO) was fabricated by modified Hummers method and a reducing process. Conductive polymer/graphene films were obtained by scalpel technology and used as photocathode in CdS quantum dot-sensitized solar cell (QDSSC). Polymers used in this paper were ethyl cellulose (EC), polyphenyl vinyl (PPV) and polyvinyl butyral (PVB), respectively. The obtained composite films were investigated by X-ray diffraction, Raman spectroscopy technology and scanning electron microscope (SEM). The photoelectric properties of QDSSCs were tested under AM 1.5 irradiation. Test results show that the film performance of the EC/rGO and PPV/rGO photocathode have been improved effectively. Power conversion efficiency (PCE) of the relative QDSSCs under AM 1.5 irradiation were 0.81% and 0.86%, respectively.

  17. Preparation of Lanthanide-Polymer Composite Material via Click Chemistry.

    Science.gov (United States)

    Chen, Bin; Wen, Guian; Wu, Jiajie; Feng, Jiachun

    2015-10-01

    Covalently attaching lanthanide complexes to the polymer backbone can effectively reduce the clustering of lanthanides and thus become an important strategy to fully unleash their potential. In this Communication, a metal-free click reaction is used for the first time to link a lanthanide complex to the polymer matrix. A diene-bearing copolymer with anthracenylmethyl methacrylate as a monomer and a dienophile-bearing lanthanide complex with 5-maleimido-1,10-phenanthroline as the second ligand are synthesized and coupled together through a Diels-Alder cycloaddition (DA). A comparative investigation demonstrates that the composite material prepared by DA click reaction shows the highest quantum yields in the same lanthanide concentration as compared to materials prepared by widely used "directly doping" and "in situ coordinating lanthanide ions with macromolecular ligand" approaches. This work suggests that the "metal-free" DA click reaction can be a promising tool in the synthesis of high efficient lanthanide functionalized polymeric materials.

  18. The dynamic response of carbon fiber-filled polymer composites

    Directory of Open Access Journals (Sweden)

    Patterson B.

    2012-08-01

    Full Text Available The dynamic (shock responses of two carbon fiber-filled polymer composites have been quantified using gas gun-driven plate impact experimentation. The first composite is a filament-wound, highly unidirectional carbon fiber-filled epoxy with a high degree of porosity. The second composite is a chopped carbon fiber- and graphite-filled phenolic resin with little-to-no porosity. Hugoniot data are presented for the carbon fiber-epoxy (CE composite to 18.6 GPa in the through-thickness direction, in which the shock propagates normal to the fibers. The data are best represented by a linear Rankine-Hugoniot fit: Us = 2.87 + 1.17 ×up(ρ0 = 1.536g/cm3. The shock wave structures were found to be highly heterogeneous, both due to the anisotropic nature of the fiber-epoxy microstructure, and the high degree of void volume. Plate impact experiments were also performed on a carbon fiber-filled phenolic (CP composite to much higher shock input pressures, exceeding the reactants-to-products transition common to polymers. The CP was found to be stiffer than the filament-wound CE in the unreacted Hugoniot regime, and transformed to products near the shock-driven reaction threshold on the principal Hugoniot previously shown for the phenolic binder itself. [19] On-going research is focused on interrogating the direction-dependent dyanamic response and dynamic failure strength (spall for the CE composite in the TT and 0∘ (fiber directions.

  19. The dynamic response of carbon fiber-filled polymer composites

    Science.gov (United States)

    Dattelbaum, D. M.; Gustavsen, R. L.; Sheffield, S. A.; Stahl, D. B.; Scharff, R. J.; Rigg, P. A.; Furmanski, J.; Orler, E. B.; Patterson, B.; Coe, J. D.

    2012-08-01

    The dynamic (shock) responses of two carbon fiber-filled polymer composites have been quantified using gas gun-driven plate impact experimentation. The first composite is a filament-wound, highly unidirectional carbon fiber-filled epoxy with a high degree of porosity. The second composite is a chopped carbon fiber- and graphite-filled phenolic resin with little-to-no porosity. Hugoniot data are presented for the carbon fiber-epoxy (CE) composite to 18.6 GPa in the through-thickness direction, in which the shock propagates normal to the fibers. The data are best represented by a linear Rankine-Hugoniot fit: Us = 2.87 + 1.17 ×up(ρ0 = 1.536g/cm3). The shock wave structures were found to be highly heterogeneous, both due to the anisotropic nature of the fiber-epoxy microstructure, and the high degree of void volume. Plate impact experiments were also performed on a carbon fiber-filled phenolic (CP) composite to much higher shock input pressures, exceeding the reactants-to-products transition common to polymers. The CP was found to be stiffer than the filament-wound CE in the unreacted Hugoniot regime, and transformed to products near the shock-driven reaction threshold on the principal Hugoniot previously shown for the phenolic binder itself. [19] On-going research is focused on interrogating the direction-dependent dyanamic response and dynamic failure strength (spall) for the CE composite in the TT and 0∘ (fiber) directions.

  20. Polarization Raman Microscopic Study of Molecular Alignment Behavior in Liquid Crystal/Polymer Composite Films

    Science.gov (United States)

    Murashige, Takeshi; Fujikake, Hideo; Sato, Hiroto; Kikuchi, Hiroshi; Kurita, Taiichiro; Sato, Fumio

    2005-12-01

    We clarified that the molecular alignment of aggregated polymers is partially synchronized with liquid crystal (LC) director reorientation in an LC/polymer composite film. The molecular alignment behavior in composite films with LC- and polymer-rich regions formed by photopolymerization-induced phase separation was investigated using polarization Raman spectral microscopy. Raman scattering intensity induced by aligned side chains of polymers in the LC-rich region changed with LC director reorientation when voltage was applied to the composite film. It was confirmed for the first time that polymers capable of movement are formed in the LC-rich region.

  1. Thermally stable polymer-ceramic composites for microwave antenna applications

    Institute of Scientific and Technical Information of China (English)

    Li ZHANG; Jie ZHANG; Zhenxing YUE; Longtu LI

    2016-01-01

    Polymer-ceramic composites were prepared by twin screw melt extrusion with high-density polyethylene (HDPE) as the matrix and polystyrene-coated BaO-Nd2O3-TiO2 (BNT) ceramics as the filling material.Interestingly,the incorporation of polystyrene (PS) by the coating route could significantly improve the thermal behaviors of the composites (HDPE-PS/BNT),besides the temperature stability of dielectric properties and thermal displacement.The microwave dielectric properties of the composites were investigated systematically.The results indicated that,as the volume fraction of BNT ceramic particles increased from 10 to 50 vol% in the composites,the dielectric constant increased from 3.54 (9.23 GHz) to 13.14 (7.20 GHz),which can be beneficial for the miniaturization of microwave devices;the dielectric loss tangent was relatively low (0.0003-0.0012);more importantly,the ratio of PS to HDPE increased accordingly,making the composite containing 50 vol% BNT ceramics have a low value of temperature coefficient of resonant frequency (τf =-11.2 ppm/℃) from-20 to 60 ℃.The GPS microstrip antennas were therefore designed and prepared from the HDPE-PS/BNT composites.They possessed good thermal stability (τf=23.6 ppm/℃) over a temperature range of-20 to 60 ℃,promising to meet the requirements of practical antenna applications.

  2. Magnetically aligned polymer-nanowire composites for solar energy harvesting

    Science.gov (United States)

    Majewski, Pawel; Pelligra, Candice; Osuji, Chinedum

    2013-03-01

    We present a solution-based approach of producing aligned arrays of ZnO nanowire-polythiophene composites for photovoltaic applications. We employ a two-step hierarchical self-assembly to maximize the efficiency of electron and hole transport in the system. First, we coat the wires with the polymer utilizing nanowire surface-directed crystallization and alignment of the polymer backbones along the long axes of the wires, then we employ magnetic fields to direct the assembly of the composites into the ordered arrays. We present quantitative SAXS data taken in-situ during the alignment process addressing the influence of paramagnetic doping level of ZnO and the magnetic field strength on the quality of the alignment. We compare the electrical conductivity of the aligned arrays of the composites to non-aligned ones and discuss the possible degree of conductivity enhancement upon the alignment in this and in analogous systems. This work is funded by the NSF under DMR-0847534 and DMR-0934520

  3. LDEF results for polymer matrix composite experiment AO 180

    Science.gov (United States)

    Tennyson, R. C.

    1992-01-01

    This report represents a summary of the results obtained to-date on a polymer matrix composite experiment (AO 180) located at station D-12, about 82 deg off the 'ram' direction. Different material systems comprised of graphite, boron, and aramid (Kevlar) fiber reinforcements were studied. Although previous results were presented on in-situ thermal-vacuum cycling effects, particularly dimensional changes associated with outgassing, additional comparative data will be shown from ground-based tests on control and flight samples. The system employed was fully automated for thermal-vacuum cycling using a laser interferometer for monitoring displacements. Erosion of all three classes of materials due to atomic oxygen (AO) will also be discussed, including angle of incidence effects. Data from this experiment will be compared to published results for similar materials in other LDEF experiments. Composite materials' erosion yields will be presented on an AO design nomogram useful for estimating total material loss for given exposure conditions in low Earth orbit (LEO). Optical properties of these materials will also be compared with control samples. A survey of the damage caused by micrometeoroids/debris impacts will be addressed as they relate to polymer matrix composites. Correlations between hole size and damage pattern will be given. Reference to a new nomogram for estimating the number distribution of micrometeoroid/debris impacts for a given space structure as a function of time in LEO will be addressed based on LDEF data.

  4. Peridynamic modeling and simulation of polymer-nanotube composites

    Science.gov (United States)

    Henke, Steven F.

    In this document, we develop and demonstrate a framework for simulating the mechanics of polymer materials that are reinforced by carbon nanotubes. Our model utilizes peridynamic theory to describe the mechanical response of the polymer and polymer-nanotube interfaces. We benefit from the continuum formulation used in peridynamics because (1) it allows the polymer material to be coarse-grained to the scale of the reinforcing nanofibers, and (2) failure via nanotube pull-out and matrix tearing are possible based on energetic considerations alone (i.e. without special treatment). To reduce the degrees of freedom that must be simulated, the reinforcement effect of the nanotubes is represented by a mesoscale bead-spring model. This approach permits the arbitrary placement of reinforcement ``strands'' in the problem domain and motivates the need for irregular quadrature point distributions, which have not yet been explored in the peridynamic setting. We address this matter in detail and report on aspects of mesh sensitivity that we uncovered in peridynamic simulations. Using a manufactured solution, we study the effects of quadrature point placement on the accuracy of the solution scheme in one and two dimensions. We demonstrate that square grids and the generator points of a centroidal Voronoi tessellation (CVT) support solutions of similar accuracy, but CVT grids have desirable characteristics that may justify the additional computational cost required for their construction. Impact simulations provide evidence that CVT grids support fracture patterns that resemble those obtained on higher resolution cubic Cartesian grids with a reduced computational burden. With the efficacy of irregular meshing schemes established, we exercise our model by dynamically stretching a cylindrical specimen composed of the polymer-nanotube composite. We vary the number of reinforcements, alignment of the filler, and the properties of the polymer-nanotube interface. Our results suggest

  5. Photonics of fullerene-conducting polymer composites and multilayered structures: new results and prospects

    Science.gov (United States)

    Yoshino, Katsumi; Yoshimoto, Kenji; Tada, Kazuya; Araki, Hishashi; Kawai, Tsuyoshi; Ozaki, Masanori; Zakhidov, Anvar A.

    1995-12-01

    The general features of charge transfer processes fullerene/conducting polymer (CP) systems, such as energetics of photoinduced charge transfer (PCT) between C60 and CP (pi) - electronic states, geometry of (pi) -(pi) overlapping and the role of self-trapping effects to polaronic states on C60 and CP chains on the PCT dynamics are analyzed. Persistent photoconductivity and electroluminescence quenching recently found in C60/CP composites additionally to photoconductivity enhancement and photoluminescence quenching observed earlier, indicate that photogenerated C60 radicals may be extremely long living in CP matrices, due to multicharging of C60 as suggested by us accompanied with deep self-trapping to polaron/bipolaron states. The anisotropy of PCT is proposed to arise due to orientational modulation of overlapping between polaronic rings on C60 and CP which strongly suppresses back recombination. The strategy to increase the efficiency of C60CP donor-acceptor (DA) photocells by improving PCT is analyzed, particularly considering multilayered structures with polarization barriers at interfaces, and increased intralayer mobilities of carriers. To increase the efficiency of photons collection in photocells we suggest three layered D-M-A structures, with molecular 'photon pump' layers strongly absorbing photons. The prospects for novel photonic applications of various C60CP systems, such as NLO devices and photomodulated field effect transistors (FETs) are discussed and illustrated by the newest results. New results on superconductivity of C60/CP upon alkali metal doping are presented, and exciting possibilities for novel superconducting phases in this system are discussed.

  6. Modelling anisotropic water transport in polymer composite reinforced with aligned triangular bars

    Indian Academy of Sciences (India)

    Bryan Pajarito; Masatoshi Kubouchi; Saiko Aoki

    2014-02-01

    This work reports anisotropic water transport in a polymer composite consisting of an epoxy matrix reinforced with aligned triangular bars made of vinyl ester. By gravimetric experiments, water diffusion in resin and polymer composites were characterized. Parameters for Fickian diffusion and polymer relaxation models were determined by least-square curve fitting to the experimental data. Diffusion parameters of epoxy and vinyl ester resin were used as input during development of finite element (FE) model of polymer composite. Through transient FE diffusion analysis, anisotropic water transport in thickness direction of the polymer composite was numerically predicted and validated against experimental results. The case of using impermeable triangular bars was also numerically simulated. The diffusivity of reinforced aligned triangular bars was confirmed to affect anisotropic water transport in the composite. The results of this work suggest possible use of polymer composite for barrier and fluid removal applications.

  7. Fatigue fracture of fiber reinforced polymer honeycomb composite sandwich structures for gas turbine engines

    Science.gov (United States)

    Nikhamkin, Mikhail; Sazhenkov, Nikolai; Samodurov, Danil

    2017-05-01

    Fiber reinforced polymer honeycomb composite sandwich structures are commonly used in different industries. In particular, they are used in the manufacture of gas turbine engines. However, fiber reinforced polymer honeycomb composite sandwich structures often have a manufacturing flaw. In theory, such flaws due to their rapid propagation reduce the durability of fiber reinforced polymer honeycomb composite sandwich structures. In this paper, bending fatigue tests of fiber reinforced polymer honeycomb composite sandwich structures with manufacturing flaws were conducted. Comparative analysis of fatigue fracture of fiber reinforced polymer honeycomb composite sandwich specimens was conducted before and after their bending fatigue tests. The analysis was based on the internal damage X-ray observation of fiber reinforced polymer honeycomb composite sandwich specimens.

  8. Tribological performance of polymer composites used in electrical engineering applications

    Indian Academy of Sciences (India)

    Zafer Demir

    2013-04-01

    Sliding wear performance of 20% mica-filled polyamide 6 (PA6 + 20% mica) and 20% short glass fibrereinforced polysulphone (PSU + 20 GFR) polymer composites used in electrical applications were investigated using a pin-on-disc wear test apparatus. Two different disc materials were used in this study. These are AISI 316 L stainless steel and 30% glass fibre-reinforced polyphenylenesulphide (PPS + 30%GFR) polymer composite. Wear test was carried out at 10, 20 and 30 N applied load values and 0.5 m/s sliding speed and at ambient temperature and humidity. Different combinations of rubbing surfaces were examined and friction coefficient and specific wear rate values were obtained and compared. For two material combinations used in this investigation, the coefficient of friction shows insignificant sensitivity to applied load values and large sensitivity to material combinations. For specific wear rate, PA6 + 20% mica composite has shown insensitivity to change in load, speed and materials combination while PSU + 20% glass fibre composite has shown high sensitivity to the change in load and material combinations. The friction coefficient of PA6 + 20% mica and PSU + 20 glass fibre rubbing against the AISI 4140 steel disc is between 0.35 and 0.40. In rubbing against PPS + 30% glass fibre their values were between 0.25 and 0.30. Specific wear rate for PA6 + 20% mica and PSU + 20% glass fibre composites are in the order of 10-13 to 10-14 m2/N. Finally, the wear mechanisms are a combination of adhesive and abrasive wear processes. In terms of application, especially in electrical systems, a substantial contribution was provided to extend switch life. Thus, besides robustness, this also ensured safety for the system and the users against undesirable situations.

  9. Ceramic nanotubes for polymer composites with stable anticorrosion properties

    Science.gov (United States)

    Fakhrullin, R. F.; Tursunbayeva, A.; Portnov, V. S.; L'vov, Yu. M.

    2014-12-01

    The use of natural halloysite clay tubes 50 nm in diameter as nanocontainers for loading, storing, and slowly releasing organic corrosion inhibitors is described. Loaded nanotubes can be mixed well with many polymers and dyes in amounts of 5-10 wt % to form a ceramic framework (which increases the strength of halloysite composites by 30-50%), increase the adhesion of these coatings to metals, and allow for the slow release of corrosion inhibitors in defects of coatings. A significant improvement of protective anticorrosion properties of polyacryl and polyurethane coatings containing ceramic nanotubes loaded with benzotriazole and hydroxyquinoline is demonstrated.

  10. Effective viscoelastic behavior of particulate polymer composites at finite concentration

    Institute of Scientific and Technical Information of China (English)

    LI Dan; HU Geng-kai

    2007-01-01

    Polymeric materials usually present some viscoelastic behavior. To improve the mechanical behavior of these materials, ceramics materials are often filled into the polymeric materials in form of fiber or particle. A micromechanical model was proposed to estimate the overall viscoelastic behavior for particulate polymer composites, especially for high volume concentration of filled particles. The method is based on Laplace transform technique and an elastic model including two-particle interaction. The effective creep compliance and the stress and strainrelation at a constant loading rate are analyzed. The results show that the proposed method predicts a significant stiffer response than those based on Mori-Tanaka's method at high volume concentration of particles.

  11. Thermal-vacuum effects on polymer matrix composite materials

    Science.gov (United States)

    Tennyson, R. C.; Mabson, G. E.

    1991-01-01

    Results are presented on the thermal-vacuum response of a variety of fiber reinforced polymers matrix composites that comprised the UTIAS experiment on the LDEF satellite. Theoretical temperature-time predictions for this experiment are in excellent agreement with test data. Results also show quite clearly the effect of outgassing in the dimensional changes of these materials and the corresponding coefficients of thermal expansion. Finally, comparison with ground-based simulation tests are presented as well. Use of these data for design purposes are also given.

  12. Mechanical behaviour of engineering materials. Metals, ceramics, polymers, and composites

    Energy Technology Data Exchange (ETDEWEB)

    Roesler, Joachim; Baeker, Martin [TU Braunschweig (Germany). Inst. fuer Werkstoffe; Harders, Harald

    2007-07-01

    How do engineering materials deform when bearing mechanical loads? To answer this crucial question, the book bridges the gap between continuum mechanics and materials science. The different kinds of material deformation (elasticity, plasticity, fracture, creep, fatigue) are explained in detail. The book also discusses the physical processes occurring during the deformation of all classes of engineering materials (metals, ceramics, polymers, and composites) and shows how these materials can be strengthened to meet the design requirements. It provides the knowledge needed in selecting the appropriate engineering material for a certain design problem.

  13. Performance of titanium oxide-polymer insulation in superconducting coils made of Bi-2212/Ag-alloy round wire

    Science.gov (United States)

    Chen, Peng; Trociewitz, Ulf P.; Dalban-Canassy, Matthieu; Jiang, Jianyi; Hellstrom, Eric E.; Larbalestier, David C.

    2013-07-01

    Conductor insulation is one of the key components needed to make Ag-alloy clad Bi2Sr2CaCu2O8+x (Bi-2212/Ag) superconducting round wire (RW) successful for high field magnet applications, as dielectric standoff and high winding current densities (Jw) directly depend on it. In this study, a TiO2-polymer insulation coating developed by nGimat LLC was applied to test samples and a high field test coil. The insulation was investigated by differential thermal analysis (DTA), thermo-gravimetric analysis (TGA), scanning electron microscopy (SEM), dielectric property measurement, and transport critical current (Ic) property measurement. About 29% of the insulation by weight is polymer. When the Bi-2212/Ag wire is fully heat treated, this decomposes with slow heating to 400 ° C in pure O2. After the full reaction, we found that the TiO2 did not degrade the critical current properties, adhered well to the conductor, and provided a breakdown voltage of more than 100 V, which allowed the test coil to survive quenching in 31.2 T background field, while providing a 2.6 T field increment. For Bi-2212/Ag RW with a typical diameter of 1.0-1.5 mm, this ˜15 μm thick insulation allows a very high coil packing factor of ˜0.74, whereas earlier alumino-silicate braid insulation only allows packing factors of 0.38-0.48.

  14. Laminate Analyses, Micromechanical Creep Response, and Fatigue Behavior of Polymer Matrix Composite Materials.

    Science.gov (United States)

    1982-12-01

    FATIGUE BEHAVIOR of POLYMER MATRIX COMPOSITE MATERIALS , 4 " .’* .. . . ". ... .. ... . . ~December 1982 41 .. FINAL REPORT .Army Research Office I I...DEPARTMENT REPORT UWME-DR-201-108-1 LAMINATE ANALYSES, MICROMECHANICAL CREEP RESPONSE, AND FATIGUE BEHAVIOR OF POLYMER MATRIX COMPOSITE MATERIALS...Behavior of Polymer Matrix Composite 16 Sept. 1979 - 30 Nov. 1982 Materials 6 PERFORMING ORG. REPORT NUMBER UWME-DR-201-108-1 7. AUTHOR(.) S. CONTRACT

  15. Investigation of Bending Test Procedures for Engineered Polymer Composite Railroad Ties

    Science.gov (United States)

    2016-12-01

    ER D C/ CE RL C R- 16 -6 Investigation of Bending Test Procedures for Engineered Polymer Composite Railroad Ties Co ns tr uc tio n En...Test Procedures for Engineered Polymer Composite Railroad Ties Claire G. Ball CTL Group 5400 Old Orchard Road Skokie, IL 60077 Final report...conducting in- vestigations to help develop and evaluate engineered polymer composite railroad ties since 1993. Recent efforts, through funding and

  16. Polymer composition and substrate influences on the adhesive bonding of a biomimetic, cross-linking polymer.

    Science.gov (United States)

    Matos-Pérez, Cristina R; White, James D; Wilker, Jonathan J

    2012-06-06

    Hierarchical biological materials such as bone, sea shells, and marine bioadhesives are providing inspiration for the assembly of synthetic molecules into complex structures. The adhesive system of marine mussels has been the focus of much attention in recent years. Several catechol-containing polymers are being developed to mimic the cross-linking of proteins containing 3,4-dihydroxyphenylalanine (DOPA) used by shellfish for sticking to rocks. Many of these biomimetic polymer systems have been shown to form surface coatings or hydrogels; however, bulk adhesion is demonstrated less often. Developing adhesives requires addressing design issues including finding a good balance between cohesive and adhesive bonding interactions. Despite the growing number of mussel-mimicking polymers, there has been little effort to generate structure-property relations and gain insights on what chemical traits give rise to the best glues. In this report, we examine the simplest of these biomimetic polymers, poly[(3,4-dihydroxystyrene)-co-styrene]. Pendant catechol groups (i.e., 3,4-dihydroxystyrene) are distributed throughout a polystyrene backbone. Several polymer derivatives were prepared, each with a different 3,4-dihyroxystyrene content. Bulk adhesion testing showed where the optimal middle ground of cohesive and adhesive bonding resides. Adhesive performance was benchmarked against commercial glues as well as the genuine material produced by live mussels. In the best case, bonding was similar to that obtained with cyanoacrylate "Krazy Glue". Performance was also examined using low- (e.g., plastics) and high-energy (e.g., metals, wood) surfaces. The adhesive bonding of poly[(3,4-dihydroxystyrene)-co-styrene] may be the strongest of reported mussel protein mimics. These insights should help us to design future biomimetic systems, thereby bringing us closer to development of bone cements, dental composites, and surgical glues.

  17. Interpenetrating Polymer Networks as Binders for Solid Composite Propellants

    Directory of Open Access Journals (Sweden)

    S. Parthiban

    1992-07-01

    Full Text Available A new family of polymeric binders for solid composite propellants is proposed, based on two component interpenetrating polymer networks (IPNs. These networks comprise two different polyurethanes based on hydroxy terminated polybutadiene and ISRO polyol interpenetrated with two different vinyl polymers, viz poly methyl methacrylate and polystyrene. the networks synthesized by the simultaneous interpenetrating technique have been characterized for their properties, such as stress-strain, density, viscosity, thermal degradation, and heat of combustion. Phase morphologies have been determined using electron microscopy. Suitable explanations have been adduced to rationalize the properties of IPNs in terms of their structures and chain interactions. A study of the mechanical properties and burning rates of the ammonium perchlorate (AP-based solid propellant using the newly synthesised IPNs as binders, has been carried out. The results show that both mechanical strength and burning rate of solid propellants could be suitably modified by simply changing the nature and/or the ratio of the two interpenetrating polymer components.

  18. AC Electric Field Activated Shape Memory Polymer Composite

    Science.gov (United States)

    Kang, Jin Ho; Siochi, Emilie J.; Penner, Ronald K.; Turner, Travis L.

    2011-01-01

    Shape memory materials have drawn interest for applications like intelligent medical devices, deployable space structures and morphing structures. Compared to other shape memory materials like shape memory alloys (SMAs) or shape memory ceramics (SMCs), shape memory polymers (SMPs) have high elastic deformation that is amenable to tailored of mechanical properties, have lower density, and are easily processed. However, SMPs have low recovery stress and long response times. A new shape memory thermosetting polymer nanocomposite (LaRC-SMPC) was synthesized with conductive fillers to enhance its thermo-mechanical characteristics. A new composition of shape memory thermosetting polymer nanocomposite (LaRC-SMPC) was synthesized with conductive functionalized graphene sheets (FGS) to enhance its thermo-mechanical characteristics. The elastic modulus of LaRC-SMPC is approximately 2.7 GPa at room temperature and 4.3 MPa above its glass transition temperature. Conductive FGSs-doped LaRC-SMPC exhibited higher conductivity compared to pristine LaRC SMP. Applying an electric field at between 0.1 Hz and 1 kHz induced faster heating to activate the LaRC-SMPC s shape memory effect relative to applying DC electric field or AC electric field at frequencies exceeding1 kHz.

  19. Polymer composites with graphene nanofillers: electrical properties and applications.

    Science.gov (United States)

    Tjong, Sie Chin

    2014-02-01

    Graphene with extraordinary high elastic modulus and excellent electrical conductivity has good prospects for use as the filler material for fabricating novel polymer composites designed for electrostatic discharge and EMI shielding protection, field emission, gas sensor, and fuel cell applications. Large amounts of graphene oxide (GO) can be obtained by wet chemical oxidation of graphite into a mixture of concentrated sulfuric acid, sodium nitrate and potassium permanganate. Accordingly, carbon atoms in the basal plane and edges of GO are decorated with oxygenated functional groups, forming an electrical insulator. To restore electrical conductivity, chemical reduction or thermal annealing is needed to eliminate oxygenated groups of GO. However, such treatments induce internal defects and remove oxygenated atoms of GO partially. The remnant-oxygenated groups affect electrical conductivity of graphene greatly. Nevertheless, reduced graphene oxide and thermally reduced graphene oxide are sufficiently conductive to form polymer nanocomposites at very low percolation threshold. This review provides the fundamentals and state-of-the-art developments in the fabrication methods and electrical property characterizations as well as the applications of novel graphene/polymer nanocomposites. Particular attention is paid to their processing-structural-electrical property relationships.

  20. CNT-based Reinforcing Polymer Matrix Composites for Lightweight Structures Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Carbon Polymer Matrix Composites (PMCs) are attractive structural materials for NASA applications due to their high strength to weight ratio, mechanical properties...

  1. Methods of enhancing conductivity of a polymer-ceramic composite electrolyte

    Science.gov (United States)

    Kumar, Binod (Inventor)

    2003-01-01

    Methods for enhancing conductivity of polymer-ceramic composite electrolytes are provided which include forming a polymer-ceramic composite electrolyte film by a melt casting technique and uniaxially stretching the film from about 5 to 15% in length. The polymer-ceramic composite electrolyte is also preferably annealed after stretching such that it has a room temperature conductivity of from 10.sup.-4 S cm.sup.-1 to 10.sup.-3 S cm.sup.-1. The polymer-ceramic composite electrolyte formed by the methods of the present invention may be used in lithium rechargeable batteries.

  2. Representation of A15 composition and TC in internal-Sn Nb3Sn superconducting strands

    Institute of Scientific and Technical Information of China (English)

    Andre; SULPICE; Jean-Louis; SOUBEYROUX; Christophe; VERWAERDE; Gia; Ky; HOANG

    2010-01-01

    Four sets of mono-element (ME) and two kinds of multifilament (MF) internal-Sn Nb3Sn superconducting strands were designed and fabricated through RRP method in which different compoment ratios, various composite configurations and some third element alloying were arranged. All the strand samples underwent a 210°C/50 h + 340°C/25 h thermal duration for Cu-Sn alloying. After that A15 phase formation heat treatment (HT) was applied for which the ME samples were chosen at three reaction temperatures of 675°C, 700°C and 725°C for 100 h and 200 h while the MF samples at four temperatures of 650°C, 675°C, 700°C and 725°C for 128 h and 200 h. The heat-treated samples were examined for A15 phase composition distribution by X-ray EDS. SQUID magnetization measurement was used to determine critical temperature TC. The obtained results demonstrate that for fully-reacted internal-Sn Nb3Sn superconductors the A15 phase composition and the intrinsic property TC are determined by the diffusion and solid state reaction mechanism and are independent of the factors including HT temperature, strand composite component and configuration arrangement, and the third element addition within the experimental range.

  3. Carbon dioxide (CO2) absorption behavior of mixed matrix polymer composites containing a flexible coordination polymer.

    Science.gov (United States)

    Culp, Jeffrey T; Sui, Lang; Goodman, Angela; Luebke, David

    2013-03-01

    Mixed matrix membranes (MMMs) comprised of metal organic frameworks (MOFs) dispersed in organic polymers are popular materials under study for potential applications in gas separations. However, research on MMMs containing structurally dynamic sorbents known as flexible MOFs has only very recently appeared in the literature. The thermodynamic requirements of the structure transition between the low porosity and high porosity phases of flexible MOFs may provide a mechanism for high adsorption selectivity in these materials. A fundamental question in MMMs containing flexible MOFs is how the constraint of the polymer matrix on the intrinsic expansion of the flexible MOF particles that occurs during gas adsorption might affect the thermodynamics of this structural phase transition and influence the gas adsorption properties of the embedded MOF. To investigate the fundamental nature of this flexible MOF-polymer interface, thin films of ~20 um thickness were prepared using the flexible linear chain coordination polymer catena-bis(dibenzoylmethanato)-(4,4'bipyridyl)nickel(II) "Ni(Bpy)(DBM)(2)" embedded as 35 wt% dispersions in Matrimid®, polystyrene, and polysulfone. The adsorption of CO(2) in the polymers and embedded particles was studied using in situ ATR-FTIR spectroscopy and variable temperature volumetric CO(2) adsorption/desorption isotherms. Interestingly, no effect of the polymer matrix on the gas adsorption behavior of the embedded Ni(Bpy)(DBM)(2) particles was observed. The composite samples all showed the same threshold pressures for CO(2) absorption and desorption hysteresis associated with the structural phase change in the polymer embedded Ni(Bpy)(DBM)(2) particles as was observed in the pristine polycrystalline sample. The current results contrast those recently reported for a MMM containing the flexible MOF "NH(2)-MIL-53" where a significant increase in the threshold pressure for CO(2) adsorption associated with the structural phase change of the MOF was

  4. Characterization of piezoelectric polymer composites for MEMS devices

    Indian Academy of Sciences (India)

    C V Madhusudhana Rao; G Prasad

    2012-08-01

    Composite piezoelectric ceramics are important materials for transducer applications in medical diagnostic devices and MEMS devices. In micrometer scale the material properties of piezopolymers or piezoceramics do not coincide with that of bulk materials. The present work is aimed at simulating the material properties of piezoceramics and piezo-polymer composite thin films in the micrometer scale and then to determine the piezo-composite material properties. Piezoceramics have very high electromechanical coupling coefficient (). But they have very high acoustic impedance and they are very brittle especially when thin films are fabricated. Piezopolymer like PVDF has low acoustic impedance and can be fabricated into thin films but it has very low value and high dielectric losses. The combination of piezoceramics and piezopolymers form the piezocomposites, which have suitable material properties for transducer applications. The composites can have different connectivities. For 2–2 composite, we can select two layers or a stack of PZT and PVDF layers. It is intended to determine the material properties both analytically and by simulation using computer simulation ANSYS software which implements finite element method (FEM). Although the simulation process presents approximate results, it can be verified from the large available experimental data from the literature with the simulated data.

  5. Silver-Polymer Composite Stars: Synthesis and Applications.

    Science.gov (United States)

    Homan, Kimberly A; Chen, Jeffrey; Schiano, Adriane; Mohamed, Mona; Willets, Katherine A; Murugesan, Sankaran; Stevenson, Keith J; Emelianov, Stanislav

    2011-05-10

    Colloidal "silver stars" were synthesized upon poly(lactic-co-glycolic) acid nanosphere templates via a facile two-step silver reduction method. Myriad dendrimer-like Ag star morphologies were synthesized by varying the amount of poly(vinyl alcohol) and trisodium citrate used during silver reduction. Scanning electron microscopy studies revealed that star-shaped silver-polymer composites possessing nanoscopic, fractal morphologies with diameters ranging from 500 nm to 7 μm were produced. These composites have broad applications from antibacterial agents to catalysis; two such applications were tested here. Surface-enhanced Raman spectroscopy (SERS) studies showed multiple hot spots of SERS activity within a single star. Electrochemical catalysis experiments demonstrated the feasibility of using the silver stars instead of platinum for the oxygen reduction reaction in alkaline fuel cells.

  6. Mechanical behavior of chemically treated Jute/Polymer composites

    Directory of Open Access Journals (Sweden)

    Murali B

    2014-03-01

    Full Text Available Fiber which serves as a reinforcement in reinforced plastics may be synthetic or natural past studies show that only artificial fibers such as glass, carbon etc., have been used in fiber reinforced plastics. Although glass and other synthetic fiber reinforced plastics possess high specific strength, their fields of application are very limited because of their inherent higher cost of production. In this connection, an investigation has been carried out to make use of jute , a natural fiber abundantly available in India. Natural fibers are not only strong and lightweight but also relatively very cheap. In the present work, jute composites are developed and their mechanical properties are evaluated. Mechanical properties of jute/polymer and compared with glass fiber/epoxy. These results indicate that jute can be used as a potential reinforcing material for making low load bearing thermoplastic composites.

  7. Buckling Analysis of Unidirectional PolymerMatrix Composite Plates

    Directory of Open Access Journals (Sweden)

    Jawad Kadhim Uleiwi

    2006-01-01

    Full Text Available This study deals with the estimation of critical load of unidirectional polymer matrix composite plates by using experimental and finite element techniques at different fiber angles and fiber volume fraction of the composite plate.Buckling analysis illustrated that the critical load decreases in nonlinear relationship with the increase of the fiber angle and that it increases with the increase of the fiber volume fraction.The results show that the maximum value of the critical load is (629.54 N/m at (? = 0? and (Vf = 40 % for the finite element method, while the minimum value of the critical load is (49 N/m at (? = 90? and (Vf = 10 % for the experimental results. The results also indicated that the maximum difference between the finite element analysis and experimental work is about (11 % at ( ? = 0? and (Vf = 40 %

  8. New transparent conductive metal based on polymer composite

    Energy Technology Data Exchange (ETDEWEB)

    Keshavarz Hedayati, Mehdi; Jamali, Mohammad [Nanochemistry and Nanoengineering, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-University, Kiel (Germany); Strunkus, Thomas; Zaporochentko, Vladimir; Faupel, Franz [Multicomponent Materials, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-University, Kiel (Germany); Elbahri, Mady [Nanochemistry and Nanoengineering, Institute for Materials Science, Faculty of Engineering, Christian-Albrechts-University, Kiel (Germany); Helmholtz-Zentrum Geesthacht GmbH, Institute of Polymer Research, Nanochemistry and Nanoengineering (Germany)

    2011-07-01

    Currently great efforts are made to develop new kind of transparent conductors (TCs) to replace ITO. In this regard different materials and composites have been proposed and studied including conductive polymers, carbon nanotubes (CNTs), metal grids, and random networks of metallic nanowires. But so far none of them could be used as a replacing material, since either they are either fragile and brittle or their electrical conductivity is below the typical ITO. Thin metallic films due to their high electrical conductivity could be one of the best replacing materials for ITO, however their poor transparency makes their application as TCs limited. Here we design and fabricate a new polymeric composite coating which enhances the transparency of the thin metal film up to 100% relative to the initial value while having a high electrical conductivity of typical metals. Therefore our proposed device has a great potential to be used as new transparent conductor.

  9. Flexural analysis of palm fiber reinforced hybrid polymer matrix composite

    Science.gov (United States)

    Venkatachalam, G.; Gautham Shankar, A.; Raghav, Dasarath; Santhosh Kiran, R.; Mahesh, Bhargav; Kumar, Krishna

    2015-07-01

    Uncertainty in availability of fossil fuels in the future and global warming increased the need for more environment friendly materials. In this work, an attempt is made to fabricate a hybrid polymer matrix composite. The blend is a mixture of General Purpose Resin and Cashew Nut Shell Liquid, a natural resin extracted from cashew plant. Palm fiber, which has high strength, is used as reinforcement material. The fiber is treated with alkali (NaOH) solution to increase its strength and adhesiveness. Parametric study of flexure strength is carried out by varying alkali concentration, duration of alkali treatment and fiber volume. Taguchi L9 Orthogonal array is followed in the design of experiments procedure for simplification. With the help of ANOVA technique, regression equations are obtained which gives the level of influence of each parameter on the flexure strength of the composite.

  10. Composites of 3D-Printed Polymers and Textile Fabrics*

    Science.gov (United States)

    Martens, Yasmin; Ehrmann, Andrea

    2017-08-01

    3D printing belongs to the rapidly emerging technologies of our time. Due to its recent drawback – the technology is relatively slow compared with other primary shaping methods, such as injection molding –, 3D printing is often not used for creating complete large components but to add specific features to existing larger objects. One of the possibilities to create such composites with an additional value consists in combining 3D printed polymers with textile fabrics. Several attempts have been made to enhance the adhesion between both materials, a task which is still challenging for diverse material combinations. Our paper reports about new experiments combining 3D printed embossed designs, snap fasteners and zip fasteners with different textile base materials, showing the possibilities and technical limits of these novel composites.

  11. Stress-tuned conductor-polymer composite for use in sensors

    Science.gov (United States)

    Martin, James E; Read, Douglas H

    2013-10-22

    A method for making a composite polymeric material with electrical conductivity determined by stress-tuning of the conductor-polymer composite, and sensors made with the stress-tuned conductor-polymer composite made by this method. Stress tuning is achieved by mixing a miscible liquid into the polymer precursor solution or by absorbing into the precursor solution a soluble compound from vapor in contact with the polymer precursor solution. The conductor may or may not be ordered by application of a magnetic field. The composite is formed by polymerization with the stress-tuning agent in the polymer matrix. The stress-tuning agent is removed following polymerization to produce a conductor-polymer composite with a stress field that depends on the amount of stress-tuning agent employed.

  12. Development of Industrially Produced Composite Quench Heaters for the LHC Superconducting Lattice Magnets

    CERN Document Server

    Szeless, Balázs; Calvone, F

    1996-01-01

    The quench heaters are vital elements for the protection of the LHC superconducting lattice magnets in the case of resistive transitions of the conductor. The basic concept of magnet protection and technical solutions are briefly presented. The quench heater consists of partially copper clad stainless steel strips sandwiched in between electric insulating carrier foils with electrical and mechanical properties such as to withstand high voltages, low temperatures, pressures and ionizing radiation. Testing of some commercial available electric insulation foils, polyimide (PI), polyetheretherketon (PEEK) and polyarylate (PA) and combinations of adhesive systems which are suitable for industrial processing are described. Possible industrial methods for series production for some 80 km of these composite quench heaters are indicated.

  13. A Novel Ionic Polymer Metal ZnO Composite (IPMZC

    Directory of Open Access Journals (Sweden)

    Sang-Mun Kim

    2011-04-01

    Full Text Available The presented research introduces a new Ionic Polymer-Metal-ZnO Composite (IPMZC demonstrating photoluminescence (PL-quenching on mechanical bending or application of an electric field. The newly fabricated IPMZC integrates the optical properties of ZnO and the electroactive nature of Ionic Polymer Metal Composites (IPMC to enable a non-contact read-out of IPMC response. The electro-mechano-optical response of the IPMZC was measured by observing the PL spectra under mechanical bending and electrical regimes. The working range was measured to be 375–475 nm. It was noted that the PL-quenching increased proportionally with the increase in curvature and applied field at 384 and 468 nm. The maximum quenching of 53.4% was achieved with the membrane curvature of 78.74/m and 3.01% when electric field (12.5 × 103 V/m is applied. Coating IPMC with crystalline ZnO was observed to improve IPMC transduction.

  14. Mechanical properties of natural fibre reinforced polymer composites

    Indian Academy of Sciences (India)

    A S Singha; Vijay Kumar Thakur

    2008-10-01

    During the last few years, natural fibres have received much more attention than ever before from the research community all over the world. These natural fibres offer a number of advantages over traditional synthetic fibres. In the present communication, a study on the synthesis and mechanical properties of new series of green composites involving Hibiscus sabdariffa fibre as a reinforcing material in urea–formaldehyde (UF) resin based polymer matrix has been reported. Static mechanical properties of randomly oriented intimately mixed Hibiscus sabdariffa fibre reinforced polymer composites such as tensile, compressive and wear properties were investigated as a function of fibre loading. Initially urea–formaldehyde resin prepared was subjected to evaluation of its optimum mechanical properties. Then reinforcing of the resin with Hibiscus sabdariffa fibre was accomplished in three different forms: particle size, short fibre and long fibre by employing optimized resin. Present work reveals that mechanical properties such as tensile strength, compressive strength and wear resistance etc of the urea–formaldehyde resin increases to considerable extent when reinforced with the fibre. Thermal (TGA/DTA/DTG) and morphological studies (SEM) of the resin and biocomposites have also been carried out.

  15. Magnetoimpedance of cobalt-based amorphous ribbons/polymer composites

    Science.gov (United States)

    Semirov, A. V.; Derevyanko, M. S.; Bukreev, D. A.; Moiseev, A. A.; Kudryavtsev, V. O.; Safronov, A. P.

    2016-10-01

    The combined influence of the temperature, the elastic tensile stress and the external magnetic field on the total impedance and impedance components were studied for rapidly quenched amorphous Co75Fe5Si4B16 ribbons. Both as-cast amorphous ribbons and Co75Fe5Si4B16/polymer amorphous ribbon based composites were considered. Following polymer coverings were studied: modified rubber solution in o-xylene, solution of butyl methacrylate and methacrylic acid copolymer in isopropanol and solution of polymethylphenylsiloxane resin in toluene. All selected composites showed very good adhesion of the coverings and allowed to provide temperature measurements from 163 K up to 383 K under the applied deforming tensile force up to 30 N. The dependence of the modulus of the impedance and its components on the external magnetic field was influenced by the elastic tensile stresses and was affected by the temperature of the samples. It was shown that maximal sensitivity of the impedance and its components to the external magnetic field was observed at minimal temperature and maximal deforming force depended on the frequency of an alternating current.

  16. APPLICATION OF ADDITIVELY MANUFACTURED POLYMER COMPOSITE PROTOTYPES IN FOUNDRY

    Directory of Open Access Journals (Sweden)

    Wiesław Kuczko

    2015-05-01

    Full Text Available The paper presents a method, developed by the authors, for manufacturing polymer composites with the matrix manufactured in a layered manner (via 3D printing – Fused Deposition Modeling out of a thermoplastic material. As an example of practical application of this method, functional prototypes are presented, which were used as elements of foundry tooling – patterns for sand molding. In case of manufacturing prototype castings or short series of products, foundries usually cooperate with modeling studios, which produce patterns by conventional, subtractive manufacturing technologies. If patterns have complex shapes, this results in high manufacturing costs and significantly longer time of tooling preparation. The method proposed by the authors allows manufacturing functional prototypes in a short time thanks to utilizing capabilities of additive manufacturing (3D printing technology. Thanks to using two types of materials simultaneously (ABS combined with chemically hardened resins, the produced prototypes are capable of carrying increased loads. Moreover, the method developed by the authors is characterized by manufacturing costs lower than in the basic technology of Fused Deposition Modeling. During the presented studies, the pattern was produced as a polymer composite and it was used to prepare a mold and a set of metal castings.

  17. Self Healing Fibre-reinforced Polymer Composites: an Overview

    Science.gov (United States)

    Bond, Ian P.; Trask, Richard S.; Williams, Hugo R.; Williams, Gareth J.

    Lightweight, high-strength, high-stiffness fibre-reinforced polymer composite materials are leading contenders as component materials to improve the efficiency and sustainability of many forms of transport. For example, their widespread use is critical to the success of advanced engineering applications, such as the Boeing 787 and Airbus A380. Such materials typically comprise complex architectures of fine fibrous reinforcement e.g. carbon or glass, dispersed within a bulk polymer matrix, e.g. epoxy. This can provide exceptionally strong, stiff, and lightweight materials which are inherently anisotropic, as the fibres are usually arranged at a multitude of predetermined angles within discrete stacked 2D layers. The direction orthogonal to the 2D layers is usually without reinforcement to avoid compromising in-plane performance, which results in a vulnerability to damage in the polymer matrix caused by out-of-plane loading, i.e. impact. Their inability to plastically deform leaves only energy absorption via damage creation. This damage often manifests itself internally within the material as intra-ply matrix cracks and inter-ply delaminations, and can thus be difficult to detect visually. Since relatively minor damage can lead to a significant reduction in strength, stiffness and stability, there has been some reticence by designers for their use in safety critical applications, and the adoption of a `no growth' approach (i.e. damage propagation from a defect constitutes failure) is now the mindset of the composites industry. This has led to excessively heavy components, shackling of innovative design, and a need for frequent inspection during service (Richardson 1996; Abrate 1998).

  18. Direct Observation of Long-Term Durability of Superconductivity in YBa2Cu3O7-Ag2O Composites

    Science.gov (United States)

    Lin, Juhn-Jong; Lin, Yong-Han; Huang, Shiu-Ming; Lee, Tsang-Chou; Chen, Teng-Ming

    2003-10-01

    We report direct observation of long-term durability of superconductivity of several YBa2Cu3O7-Ag2O composites that were first prepared and studied almost fourteen years ago [J. J. Lin et al.: Jpn. J. Appl. Phys. 29 (1990) 497]. Remeasurements performed recently on both resistances and magnetizations indicate a sharp critical transition temperature at 91 K. We also find that such long-term environmental stability of high-temperature superconductivity can only be achieved in YBa2Cu3O7 with Ag2O addition, but not with pure Ag addition.

  19. Release characteristics of selected carbon nanotube polymer composites

    Science.gov (United States)

    Multi-walled carbon nanotubes (MWCNTs) are commonly used in polymer formulations to improve strength, conductivity, and other attributes. A developing concern is the potential for carbon nanotube polymer nanocomposites to release nanoparticles into the environment as the polymer ...

  20. Shock Compression and Strain Rate Effect in Composites and Polymers

    Energy Technology Data Exchange (ETDEWEB)

    Brown, Eric [Los Alamos National Laboratory

    2012-06-20

    Polymers are increasingly being utilized as monolithic materials and composite matrices for structural applications historically reserved for metals. High strain and high strain-rate applications in aerospace, defense, and automotive industries have lead to interest in utilizing the ability of many polymers to withstand extensions to failure of several hundred percent, often without localization or necking and their strong rate dependence. A broad range of characterization techniques will be presented for semi-crystalline polymers and composites including elastic-plastic fracture, split Hopkinson pressure bar (SHPB), plate impact including soft-recovery and lateral gage measurements and Taylor Impact. Gas-launched, plate impact experiments have been performed on pedigreed PTFE 7C, mounted in momentum-trapped, shock assemblies, with impact pressures above and below the phase II to phase III crystalline transition to probe subtle changes in the crystallinity, microstructure, and mechanical response of PTFE. Observed strong anisotropy on the hugoniot and spall behavior of fiber-reinforced composites will be discussed. Polymers are known to exhibit a strong dependence of the yield stress on temperature and strain-rate that are often observed to be linear for temperature and logarithmic for strain-rate. Temperature and strain-rate dependence will be reviewed in terms of classic time-temperature superposition and an empirical mapping function for superposition between temperature and strain-rate. The recent extension of the new Dynamic-Tensile-Extrusion (Dyn-Ten-Ext) technique to probe the dynamic tensile responses of polymers will be discussed, where more irregular deformation and stochastic-based damage and failure mechanisms than the stable plastic elongation and shear instabilities observed that in metals. The opportunity to use of Dyn-Ten-Ext to probe incipient damage at very high strain-rate by linking in situ and post mortem experimental observations with high

  1. Solid Particle Erosion response of fiber and particulate filled polymer based hybrid composites: A review

    Directory of Open Access Journals (Sweden)

    Yogesh M

    2016-01-01

    Full Text Available The solid particle erosion behaviour of fiber and particulate filled polymer composites has been reviewed. An overview of the problem of solid particle erosion was given with respect to the processes and modes during erosion with focus on polymer matrix composites. The new aspects in the experimental studies of erosion of fiber and particulate filled polymer composites were emphasized in this paper. Various predictions and models proposed to describe the erosion rate were listed and their suitability was mentioned. Implementation of design of experiments and statistical techniques in analyzing the erosion behaviour of composites was discussed. Recent findings on erosion response of multi-component hybrid composites were also presented. Recommendations were given on how to solve some open questions related to the structureerosion resistance relationships for polymers and polymer based hybrid composites.

  2. Performance of polymer nano composite membrane electrode assembly using Alginate as a dopant in polymer electrolyte membrane fuel cell

    Science.gov (United States)

    Mulijani, S.

    2017-01-01

    Polymer membrane and composite polymer for membrane electrode assembly (MEAs) are synthesized and studied for usage in direct methanol fuel cell (DMFC). In this study, we prepared 3 type of MEAs, polystyrene (PS), sulfonated polystyrene (SPS) and composite polymer SPS-alginat membrane via catalyst hot pressed method. The performance and properties of prepared MEAs were evaluated and analyzed by impedance spectrometry and scanning electron microscopy (SEM). The result showed that, water up take of MEA composite polymer SPS-alginate was obtained higher than that in SPS and PS. The proton conductivity of MEA-SPS-alginate was also higher than that PS and PSS. SEM characterization revealed that the intimate contact between the carbon catalyst layers (CL) and the membranes, and the uniformly porous structure correlate positively with the MEAs prepared by hot pressed method, exhibiting high performances for DMFC.

  3. Performance of polymer nano composite membrane electrode assembly using Alginate as a dopant in polymer electrolyte membrane fuel cell

    Science.gov (United States)

    Mulijani, S.

    2016-11-01

    Polymer membrane and composite polymer for membrane electrode assembly (MEAs) are synthesized and studied for usage in direct methanol fuel cell (DMFC). In this study, we prepared 3 type of MEAs, polystyrene (PS), sulfonated polystyrene (SPS) and composite polymer SPS-alginat membrane via catalyst hot pressed method. The performance and properties of prepared MEAs were evaluated and analyzed by impedance spectrometry and scanning electron microscopy (SEM). The result showed that, water up take of MEA composite polymer SPS-alginate was obtained higher than that in SPS and PS. The proton conductivity of MEA-SPS-alginate was also higher than that PS and PSS. SEM characterization revealed that the intimate contact between the carbon catalyst layers (CL) and the membranes, and the uniformly porous structure correlate positively with the MEAs prepared by hot pressed method, exhibiting high performances for DMFC.

  4. Hybrid polymer composite membrane for an electromagnetic (EM) valveless micropump

    Science.gov (United States)

    Said, Muzalifah Mohd; Yunas, Jumril; Bais, Badariah; Azlan Hamzah, Azrul; Yeop Majlis, Burhanuddin

    2017-07-01

    In this paper, we report on a hybrid membrane used as an actuator in an electromagnetically driven valveless micropump developed using MEMS processes. The membrane structure consists of the combination of a magnetic polymer composite membrane and an attached bulk permanent magnet which is expected to have a compact structure and a strong magnetic force with maintained membrane flexibility. A soft polymeric material made of polydimethylsiloxane (PDMS) is initially mixed with neodymium magnetic particles (NdFeB) to form a magnetic polymer composite membrane. The membrane is then bonded with the PDMS based microfluidic part, developed using soft lithography process. The developed micropump was tested in terms of the actuator membrane deflection capability and the fluidic flow of the injected fluid sample through the microfluidic channel. The experimental results show that the magnetic composite actuator membrane with an attached bulk permanent magnet is capable of producing a maximum membrane deflection of up to 106 µm. The functionality test of the electromagnetic (EM) actuator for fluid pumping purposes was done by supplying an AC voltage with various amplitudes, signal waves and frequencies. A wide range of sample injection rates from a few µl min-1 to tens of nl min-1 was achieved with a maximum flow rate of 6.6 µl min-1. The injection flow rate of the EM micropump can be controlled by adjusting the voltage amplitude and frequency supplied to the EM coil, to control the membrane deflection in the pump chamber. The designed valveless EM micropump has a very high potential to enhance the drug delivery system capability in biomedical applications.

  5. Self-Healing Composite of Thermoset Polymer and Programmed Super Contraction Fibers

    Science.gov (United States)

    Li, Guoqiang (Inventor); Meng, Harper (Inventor)

    2016-01-01

    A composition comprising thermoset polymer, shape memory polymer to facilitate macro scale damage closure, and a thermoplastic polymer for molecular scale healing is disclosed; the composition has the ability to resolve structural defects by a bio-mimetic close-then heal process. In use, the shape memory polymer serves to bring surfaces of a structural defect into approximation, whereafter use of the thermoplastic polymer for molecular scale healing allowed for movement of the thermoplastic polymer into the defect and thus obtain molecular scale healing. The thermoplastic can be fibers, particles or spheres which are used by heating to a level at or above the thermoplastic's melting point, then cooling of the composition below the melting temperature of the thermoplastic. Compositions of the invention have the ability to not only close macroscopic defects, but also to do so repeatedly even if another wound/damage occurs in a previously healed/repaired area.

  6. Preparation of Composite Films of a Conjugated Polymer and C60NWs and Their Photovoltaic Application

    OpenAIRE

    Takatsugu Wakahara; Kun’ichi Miyazawa; Osamu Ito; Nobutaka Tanigaki

    2016-01-01

    Composite films of conjugated polymers, such as poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) and poly(3-hexylthiophene) (P3HT), with C60 nanowhiskers (C60NWs) were prepared. The photoluminescence originating from the conjugated MDMO-PPV polymers was effectively quenched in the composite film, indicating a strong interaction between the conjugated polymer and C60NWs. The photovoltaic devices were fabricated using C60NW (conjugated polymer) composite films, result...

  7. Preparation of Composite Films of a Conjugated Polymer and C60NWs and Their Photovoltaic Application

    OpenAIRE

    Takatsugu Wakahara; Kun’ichi Miyazawa; Osamu Ito; Nobutaka Tanigaki

    2016-01-01

    Composite films of conjugated polymers, such as poly[2-methoxy-5-(3′,7′-dimethyloctyloxy)-1,4-phenylenevinylene] (MDMO-PPV) and poly(3-hexylthiophene) (P3HT), with C60 nanowhiskers (C60NWs) were prepared. The photoluminescence originating from the conjugated MDMO-PPV polymers was effectively quenched in the composite film, indicating a strong interaction between the conjugated polymer and C60NWs. The photovoltaic devices were fabricated using C60NW (conjugated polymer) composite films, result...

  8. Nano-Textured Fiber Coatings for Energy Absorbing Polymer Matrix Composite Materials

    Science.gov (United States)

    2004-12-01

    NANO-TEXTURED FIBER COATINGS FOR ENERGY ABSORBING POLYMER MATRIX COMPOSITE MATERIALS R. E. Jensen and S. H. McKnight Army Research Laboratory...Textured Fiber Coatings For Energy Absorbing Polymer Matrix Composite Materials 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6

  9. Enhancement of X-ray detection by single-walled carbon nanotube enriched flexible polymer composite

    OpenAIRE

    Han, Heetak; Lee, Sanggeun; Seo, Jungmok; Mahata, Chandreswar; Cho, Sung Hwan; Han, A-Reum; Hong, Keun-Sung; Park, Joon-Ho; Soh, Myung-Jin; Park, Cheolmin; Lee, Taeyoon

    2014-01-01

    Abstract Although organic-based direct conversion X-ray detectors have been developed, their photocurrent generation efficiency has been limited by recombination of excitons due to the intrinsically poor electrical properties of organic materials. In this report, we fabricated a polymer-based flexible X-ray detector and enhanced the X-ray detection sensitivity using a single-walled carbon nanotube (SWNT) enriched polymer composite. When this SWNT enriched polymer composite was used as the act...

  10. Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Zhen, E-mail: zhen.huang@sjtu.edu.cn [Academy of Information Technology and Electrical Engineering, Shanghai Jiao Tong University, 800 Dongchuan Road, Shanghai 200240 (China); Ruiz, H.S., E-mail: dr.harold.ruiz@le.ac.uk [Department of Engineering, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom); Coombs, T.A., E-mail: tac1000@cam.ac.uk [Department of Engineering, University of Cambridge, 9 JJ Thomson Avenue, Cambridge CB3 0FA (United Kingdom)

    2017-03-15

    Highlights: • Different compositions of the magnetic poles have been obtained depending on the relative orientation of the magnetizing coil and the surfaces of the columns of bulks that conform a magnetic pole. • Two bidimensional models accounting for the electromagnetic response of the top and lateral cross sections of three columns of HTS bulks subjected to multiple pulsed magnetic fields have been created. • An extended PFM strategy has been proposed by considering the magnetization of at least three successive columns of HTS bulks per pole. In the extended PFM strategy the area of each one of the poles can be seen increased by a factor of 200%-400% - Abstract: High temperature superconducting (HTS) bulks offer the potential of trapping and maintaining much higher magnetic loading level compared with the conventional permanent magnets used in rotary machines, although the effective magnetization of multiple HTS bulks with different relative orientations over the surface of cylindrical rotors creates new challenges. In this paper, we present the design and numerical validation of the Pulse Field Magnetization (PFM) strategy considered for the magnetization of the four-pole synchronous fully superconducting motor developed at the University of Cambridge. In a first instance, singular columns of up to five HTS bulks aligned over the height of the rotor were subjected to up to three magnetic pulses of 1.5 T peak, and the experimental results have been simulated by considering the electrical and thermal properties of the system in a 2D approach. The entire active surface of the rotor is covered by HTS bulks of approximately the same dimensions, resulting in an uneven distribution of pole areas with at least one of the poles formed by up to 3 columns of magnetized bulks, with relatively the same peaks of trapped magnetic field. Thus, in order to effectively use the entire area of the superconducting rotor, multiple pulsed fields per column have been applied

  11. Hybrid filler composition optimization for tensile strength of jute fibre-reinforced polymer composite

    Indian Academy of Sciences (India)

    ANURAG GUPTA; HARI SINGH; R SWALIA

    2016-09-01

    In present research work, pultrusion process is used to develop jute fibre-reinforced polyester (GFRP) composite and experiments have been performed on an indigenously developed pultrusion experimental setup. The developed composite consists of natural jute fibre as reinforcement and unsaturated polyester resin as matrix with hybrid filler containing bagasse fibre, carbon black and calcium carbonate (CaCO$_3$). The effect of weight content of bagasse fibre, carbon black and calcium carbonate on tensile strength of pultruded GFRP composite is evaluated and the optimum hybrid filler composition for maximizing the tensile strength is determined. Different compositions of hybrid filler are prepared by mixing three fillers using Taguchi L$_9$ orthogonal array. Fifteen percent of hybrid filler of different composition by weight was mixed in the unsaturated polyester resin matrix. Taguchi L$_9$ orthogonal array (OA) has been used to plan the experiments and ANOVA is used for analysing tensile strength. A regression model has also been proposed to evaluate the tensile strength of the composite within 7% error by varying the abovefillers weight. A confirmation experiment was performed which gives 73.14 MPa tensile strength of pultruded jute fibre polymer composite at the optimum composition of hybrid filler.

  12. The effect of surface roughness on repair bond strength of light-curing composite resin to polymer composite substrate.

    Science.gov (United States)

    Kallio, Timo T; Tezvergil-Mutluay, Arzu; Lassila, Lippo V J; Vallittu, Pekka K

    2013-01-01

    The purpose of this study was to analyze the shear bond strength of a new composite resin to polymer-based composite substrates using various surface roughnesses and two kinds of polymer matrices. Particulate filler composite resin with cross-linked polymer matrix and fiber-reinforced composite with semi-interpenetrating polymer matrix were used as bonding substrates after being ground to different roughnesses. Substrates were aged in water for one week before bonding to new resin composites. Twelve specimens in the substrate groups were ground with grinding papers of four grits; 320, 800, 1200 and 2400. Corresponding values of surface roughness (Ra) varied from 0.09 to 0.40 for the particulate filler composite resin and 0.07 to 0.96 for the fiber-reinforced composite resin. Characteristic shear bond strength between the new resin and particulate filler composite resin was highest (27.8 MPa) with the roughest surface (Weibull modulus: 2.085). Fiber-reinforced composite showed the highest bond strength (20.8 MPa) with the smoothest surface (Weibull modulus: 4.713). We concluded that surface roughness did not increase the bonding of new resin to the substrate of IPN based fiber-reinforced composite, whereas the roughness contributed to bonding the new resin to the particulate filler composite resin with a cross-linked polymer matrix.

  13. ROMP-based polymer composites and biorenewable rubbers

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, Wonje [Iowa State Univ., Ames, IA (United States)

    2009-01-01

    This research is divided into two related topics. In the first topic, the synthesis and characterization of novel composite materials reinforced with MWCNTs by ring-opening metathesis polymerization (ROMP) is reported for two ROMP based monomers: dicyclopentadiene (DCPD) and 5-ethylidene-2-norbornene (ENB). Homogeneous dispersion of MWCNTs in the polymer matrices is achieved by grafting norbornene moieties onto the nanotube surface. For the DCPD-based system, the investigation of mechanical properties of the composites shows a remarkable increase of tensile toughness with just 0.4 wt % of functionalized MWCNTs (f-MWCNTs). To our knowledge, this represents the highest toughness enhancement efficiency in thermosetting composites ever reported. DMA results show that there is a general increase of thermal stability (rg) with the addition of f-MWCNTs, which means that covalently bonded f-MWCNTs can reduce the local chain mobility of the matrix by interfacial interactions. The ENB system also shows significant enhancement of the toughness using just 0.8 wt % f-MWCNTs. These results indicate that the ROMP approach for polyENB is also very effective. The second topic is an investigation of the biorenewable rubbers synthesized by the tandem ROMP and cationic polymerization. The resin consists of a norbornenyl-modified linseed oil and a norbornene diester. Characterization of the bio-based rubbers includes dynamic mechanical analysis, tensile testing, and thermogravimetric analysis. The experimental results show that there is a decrease in glass transition temperature and slight increase of elongation with increased diester loading.

  14. Structure - property relations of high-temperature composite polymer matrices

    Energy Technology Data Exchange (ETDEWEB)

    Morgan, R.J.; Jurek, R.J.; Larive, D.E. [Michigan Molecular Institute, Midland, MI (United States); Tung, C.M. [Northrop Corp., Hawthorne, CA (United States); Donnellan, T. [Naval Air Development Center, Warminster, PA (United States)

    1993-12-31

    The structure-deformation-failure mode-mechanical property relations of high-temperature thermoplastic polyimide and thermoset bismaleimide (BMI) polymeric matrices and their composites will be discussed. In the case of polyimides, the effects of test temperature, thermal history, strain rate, type of filler, and filler volume fraction on structure - property relations will be discussed. For BMIs we report systematic Fourier transform infrared spectroscopy and differential scanning calorimetry studies of the cure reactions as a function of chemical composition and time - temperature cure conditions and then describe the resultant cross-linked network structure based on our understanding of the cure reactions. The optimization of the BMI matrix toughness will be considered in terms of network structure and process-induced matrix microcracking. We also describe optimization of composite prepreg, lamination and postcure conditions based on cure kinetics, and their relationship to the BMI viscosity-time-temperature profiles. The critical processing-performance limitations of high-temperature polymer matrices will be critically discussed, and toughening approaches to address these limitations, such as toughness over a wide temperature range, will be presented. 7 refs., 2 figs., 1 tab.

  15. Healable thermoset polymer composite embedded with stimuli-responsive fibres.

    Science.gov (United States)

    Li, Guoqiang; Meng, Harper; Hu, Jinlian

    2012-12-07

    Severe wounds in biological systems such as human skin cannot heal themselves, unless they are first stitched together. Healing of macroscopic damage in thermoset polymer composites faces a similar challenge. Stimuli-responsive shape-changing polymeric fibres with outstanding mechanical properties embedded in polymers may be able to close macro-cracks automatically upon stimulation such as heating. Here, a stimuli-responsive fibre (SRF) with outstanding mechanical properties and supercontraction capability was fabricated for the purpose of healing macroscopic damage. The SRFs and thermoplastic particles (TPs) were incorporated into regular thermosetting epoxy for repeatedly healing macroscopic damages. The system works by mimicking self-healing of biological systems such as human skin, close (stitch) then heal, i.e. close the macroscopic crack through the thermal-induced supercontraction of the SRFs, and bond the closed crack through melting and diffusing of TPs at the crack interface. The healing efficiency determined using tapered double-cantilever beam specimens was 94 per cent. The self-healing process was reasonably repeatable.

  16. Effect of Coupling Agent on the Properties of Polymer/Date Pits Composites

    Directory of Open Access Journals (Sweden)

    Fares D. Alsewailem

    2014-01-01

    Full Text Available The morphology of the fracture surfaces of polymer/date pits composites was investigated. Polymers used in this study were high density polyethylene (HDPE and polystyrene (PS. Date pits in the form of granules were two types of date pits: khlaas (K and sekari (S. Two coupling agents, diphenylmethane-4 4′-diisocyanate (DPMI and ethylene propylene grafted with malice anhydride (EP-g-MA, were used to ease the incorporation of date pit particles into polymer matrix. The SEM micrographs of the neat composites, that is, with no coupling agents, showed coarse morphology with bad dispersion, adhesion, and distribution of date pit particles within the polymer matrix. On the other hand, PS100/K composites coupled with DPMI and EP-g-MA had reasonable dispersed phase size with good distribution and adhesion to the composite matrix which in turn improve the mechanical properties of the resulted polymer/date pits composites.

  17. Method of Making an Electroactive Sensing/Actuating Material for Carbon Nanotube Polymer Composite

    Science.gov (United States)

    Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

    2009-01-01

    An electroactive sensing or actuating material comprises a composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation of the composite when such composite is affected by an external stimulus. In another embodiment, the composite comprises a, third component of micro -sized to nano-sized particles of an electroactive ceramic that is also incorporated in the polymer matrix. The method for making the three-phase composite comprises either incorporating the carbon nanotubes in the polymer matrix before incorporation of the particles of ceramic or mixing the carbon nanotubes and particles of ceramic together in a solution before incorporation in the polymer matrix.

  18. Sensing/actuating materials made from carbon nanotube polymer composites and methods for making same

    Science.gov (United States)

    Ounaies, Zoubeida (Inventor); Park, Cheol (Inventor); Harrison, Joycelyn S. (Inventor); Holloway, Nancy M. (Inventor); Draughon, Gregory K. (Inventor)

    2008-01-01

    An electroactive sensing or actuating material comprises a composite made from a polymer with polarizable moieties and an effective amount of carbon nanotubes incorporated in the polymer for a predetermined electromechanical operation of the composite when such composite is affected by an external stimulus. In another embodiment, the composite comprises a third component of micro-sized to nano-sized particles of an electroactive ceramic that is also incorporated in the polymer matrix. The method for making the three-phase composite comprises either incorporating the carbon nanotubes in the polymer matrix before incorporation of the particles of ceramic or mixing the carbon nanotubes and particles of ceramic together in a solution before incorporation in the polymer matrix.

  19. Polymer-SnO2 composite membranes

    DEFF Research Database (Denmark)

    Nørgaard, Casper Frydendal; Skou, Eivind Morten

    When designing sulfonic acid based ionomers, high ion exchange capacity (IEC) comes at the expense of the mechanical properties. With too high IEC, the membrane will excessively swell or even dissolve in water. Therefore a suitable compromise must be found between high charge carrier concentration...... and adequate mechanical properties. It has been demonstrated that this compromise can be found at higher IEC when the mechanical properties are improved by increasing crystallinity, increasing molecular weight, crosslinking or reinforcement of the membrane by dispersion of interacting particles therein....... This work utilizes the latter approach and makes use of particles of tin dioxide (SnO2). Polymer-SnO2 composite membranes were successfully prepared using an ion-exchange method. SnO2 was incorporated into membranes by ion-exchange in solutions of SnCl2 ∙ 2 H2O in methanol, followed by oxidation to SnO2...

  20. Electromechanical modelling of tapered ionic polymer metal composites transducers

    Directory of Open Access Journals (Sweden)

    Rakesha Chandra Dash

    2016-09-01

    Full Text Available Ionic polymer metal composites (IPMCs are relatively new smart materials that exhibit a bidirectional electromechanical coupling. IPMCs have large number of important engineering applications such as micro robotics, biomedical devices, biomimetic robotics etc. This paper presents a comparison between tapered and uniform cantilevered Nafion based IPMCs transducer. Electromechanical modelling is done for the tapered beam. Thickness can be varied according to the requirement of force and deflection. Numerical results pertaining to the force and deflection characteristics of both type IPMCs transducer are obtained. It is shown that the desired amount of force and deflections for tapered IPMCs can be achieved for a given voltage. Different fixed end (t0 and free end (t1 thickness values have been taken to justify the results using MATLAB.

  1. Permeability characterization of polymer matrix composites by RTM/VARTM

    Science.gov (United States)

    Naik, N. K.; Sirisha, M.; Inani, A.

    2014-02-01

    Cost effective manufacturing of high performance polymer matrix composite structures is an important consideration for the growth of its use. Resin transfer moulding (RTM) and vacuum assisted resin transfer moulding (VARTM) are the efficient processes for the cost effective manufacturing. These processes involve transfer of resin from the tank into the reinforcing preform loaded into a closed mould. Resin flow within the preform and reinforcement wetting can be characterized using the permeability properties. Different reinforcement and resin properties and process parameters affecting the permeability are discussed based on state of art literature review covering experimental studies. General theory for the determination of permeability is presented. Based on the literature review, permeability values for different reinforcement architecture, resin and processing conditions are presented. Further, possible sources of error during experimental determination of permeability and issues involved with reproducibility are discussed.

  2. Measuring time-dependent diffusion in polymer matrix composites

    Energy Technology Data Exchange (ETDEWEB)

    Pilli, Siva Prasad; Smith, Lloyd V.; Shutthanandan, V.

    2014-11-01

    Moisture plays a significant role in influencing the mechanical behavior and long-term durability of polymer matrix composites (PMC’s). The common methods used to determine the moisture diffusion coefficients of PMCs are based on the solution of Fickian diffusion in the one-dimensional domain. Fick’s Law assumes that equilibrium between the material surface and the external vapor is established instantaneously. A time dependent boundary condition has been shown to improve correlation with some bulk diffusion measurements, but has not been validated experimentally. The surface moisture content in a Toray 800S/3900-2B toughened quasi-isotropic laminate system, [0/±60]s, was analyzed experimentally using Nuclear Reaction Analysis (NRA). It was found that the surface moisture content showed a rapid increase to an intermediate concentration C0, followed by a slow linear increase to the saturation level.

  3. Manufacture and Performance of Ionic Polymer-Metal Composites

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Ion-exchange Polymer Metal Composites (IPMC) are a new class of intelligent material that can be used effectively as actuators and artificial muscles. IPMC was fabricated and its displacement and force characteristics were investigated with respect to voltage, frequency and waveform of the controlling signal. A square waveform input generated slightly larger displacement and force than sinusoidal or triangular waveform. When the voltage was increased and the frequency was decreased,displacement and force were both increased. However, although the bending deformation of IPMC was large, the output force was much lower than we expected. Improvement of the force output is key and is the main obstacle to be overcome in order to make IPMC of practical use.

  4. Creep Test of Polymer-matrix 3-D Braided Composites

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The long-term creep behavior of polymer-matrix 3-D braided composites was studied by using the tensile creep test method, and the effect of braiding structure, braiding angle and fiber volume fraction were discussed. The creep curve appears as expected, and can be defimed two phases,namely, the primary phase and the secondary phase. For each sample, strain increases with time rapidly, and then the strain rate decreases and appears to approach a constant rate of change (steady-state creep). The experiment results show that the creep resistant properties are improved while the braiding angle decreases or the fiber volume fraction increases, and that the five-directional braiding structure offers better creep resistant properties than the fourdirectional braiding structure.

  5. Engineering solutions for polymer composites solar water heaters production

    Science.gov (United States)

    Frid, S. E.; Arsatov, A. V.; Oshchepkov, M. Yu.

    2016-06-01

    Analysis of engineering solutions aimed at a considerable decrease of solar water heaters cost via the use of polymer composites in heaters construction and solar collector and heat storage integration into a single device representing an integrated unit results are considered. Possibilities of creating solar water heaters of only three components and changing welding, soldering, mechanical treatment, and assembly of a complicate construction for large components molding of polymer composites and their gluing are demonstrated. Materials of unit components and engineering solutions for their manufacturing are analyzed with consideration for construction requirements of solar water heaters. Optimal materials are fiber glass and carbon-filled plastics based on hot-cure thermosets, and an optimal molding technology is hot molding. It is necessary to manufacture the absorbing panel as corrugated and to use a special paint as its selective coating. Parameters of the unit have been optimized by calculation. Developed two-dimensional numerical model of the unit demonstrates good agreement with the experiment. Optimal ratio of daily load to receiving surface area of a solar water heater operating on a clear summer day in the midland of Russia is 130‒150 L/m2. Storage tank volume and load schedule have a slight effect on solar water heater output. A thermal insulation layer of 35‒40 mm is sufficient to provide an efficient thermal insulation of the back and side walls. An experimental model layout representing a solar water heater prototype of a prime cost of 70‒90/(m2 receiving surface) has been developed for a manufacturing volume of no less than 5000 pieces per year.

  6. Interpenetrating phase ceramic/polymer composite coatings: Fabrication and characterization

    Science.gov (United States)

    Craig, Bradley Dene

    The goals of this thesis research were to fabricate interpenetrating phase composite (IPC) ceramic/polymer coatings and to investigate the effect of the interconnected microstructure on the physical and wear properties of the coatings. IPC coatings with an interpenetrating phase microstructure were successfully fabricated by first forming a porous ceramic with an interconnected microstructure using a chemical bonding route (mainly reacting alpha-alumina (0.3 mum) with orthophosphoric acid to form a phosphate bond). Porosity within these ceramic coatings was easily controlled between 20 and 50 vol. % by phosphoric acid addition, and was measured by a new porosity measurement technique (thermogravimetric volatilization of liquids, or TVL) which was developed. The resulting ceramic preforms were infiltrated with a UV and thermally curable cycloaliphatic epoxide resin and cured. This fabrication route resulted in composite coatings with thicknesses ranging from ˜1mum to 100 mum with complete filling of open pore space. The physical properties of the composite coatings, including microhardness, flexural modulus and wear resistance, were evaluated as a function of processing variables, including orthophosphoric acid content and ceramic phase firing temperature, which affected the microstructure and interparticulate bonding between particles in the coatings. For example, microhardness increased from ˜30 on the Vicker's scale to well over 200 as interparticulate bonding was increased in the ceramic phase. Additionally, Taber wear resistance in the best TPC coatings was found to approach that of fully-densified alumina under certain conditions. Several factors were found to influence the wear mechanism in the IPC coating materials. Forming strong connections between ceramic particles led to up to an order of magnitude increase in the wear resistance. Additionally, coating microhardness and ceramic/polymer interfacial strength were studied and found to be important in

  7. Dielectric Property Enhancement in Polymer Composites with Engineered Interfaces

    Science.gov (United States)

    Krentz, Timothy Michael

    This thesis reports studies into the dielectric behavior of polymer composites filled with silica nanoparticles. The permittivity and dielectric breakdown strength (DBS) of these materials are critical to their performance in insulating applications such as high voltage power transmission. Until now, the mechanisms which lead to improvements in DBS in these systems have been poorly understood, in part because the effects of dispersion of the filler and the filler's surface electronic characteristics have been confused. The new surface modifications created in this thesis permit these two parameters to be addressed independently, leading to the hypothesis that nanocomposite dielectric materials exhibit DBS enhancement when electron avalanches are prevented from proceeding to reach a critical size capable of causing failure. The same control of dispersion and surface properties also lead to changes in the permittivity of the composite based upon the polarizability and trapping behavior of the filler. In this work, the dispersion and surface states of silica nanoparticles were independently controlled with two separate populations of surface molecules. Two matrix materials were studied, and in each system, a different, matrix-compatible long chain polymer is required to control dispersion. Conversely, a second population of short molecules is shown to be capable of creating electronic traps associated with the silica nanoparticle surface which lead to DBS enhancements largely independent of the matrix, indicating that the same failure mechanism is operating in both epoxy and polypropylene. Progressive variation in dispersion quality is attained with this surface modification scheme. This creates progressively smaller volumes of matrix polymer unaffected by the filler. This work shows that when these volumes approach and become smaller than the same scale as predicted for electron avalanches, the greatest changes in DBS are seen. Likewise, the plateau behavior of this

  8. Composite gel polymer electrolyte for lithium ion batteries

    Science.gov (United States)

    Naderi, Roya

    Composite gel polymer electrolyte (CGPE) films, consisting of poly (vinylidene fluoride-hexafluoropropylene) (PVdF-HFP) as the membrane, DMF and PC as solvent and plasticizing agent, mixture of charge modified TiO2 and SiO 2 nano particles as ionic conductors, and LiClO4+LiPF 6 as lithium salts were fabricated. Following the work done by Li et al., CGPE was coated on an O2-plasma treated trilayer polypropylene-polyethylene-polypropylene membrane separator using solution casting technique in order to improve the adhesive properties of gel polymer electrolyte to the separator membrane and its respective ionic conductivity due to decreasing the bulk resistance. In acidic CGPE with, the mixture of acid treated TiO2 and neutral SiO2 nano particles played the role of the charge modified nano fillers with enhanced hydroxyl groups. Likely, the mixture of neutral TiO 2 nano particles with basic SiO2 prepared through the hydrolization of tetraethyl orthosilicate (TEOS) provided a more basic environment due to the residues of NH4OH (Ammonium hydroxide) catalyst. The O2 plasma treated separator was coated with the solution of PVDF-HFP: modified nano fillers: Organic solvents with the mixture ratio of 0.1:0.01:1. After the evaporation of the organic solvents, the dried coated separator was soaked in PC-LiClO4+LiPF6 in EC: DMC:DEC (4:2:4 in volume) solution (300% wt. of PVDF-HFP) to form the final CGPE. Lim et al. has reported the enhanced ionic conductivity of 9.78*10-5 Scm-1 in an acidic composite polystyrene-Al2O3 solid electrolyte system with compared to that of basic and neutral in which the ionic conductivity undergoes an ion hopping process in solid interface rather than a segmental movement of ions through the plasticized polymer chain . Half-cells with graphite anode and Li metal as reference electrode were then assembled and the electrochemical measurements and morphology examinations were successfully carried out. Half cells demonstrated a considerable change in their

  9. Investigations of sewn preform characteristics and quality aspects for the manufacturing of fiber reinforced polymer composites

    OpenAIRE

    Ogale, Amol

    2017-01-01

    Sewn net-shape preform based composite manufacturing technology is widely accepted in combination with liquid composite molding technologies for the manufacturing of fiber reinforced polymer composites. The development of threedimensional dry fibrous reinforcement structures containing desired fiber orientation and volume fraction before the resin infusion is based on the predefined preforming processes. Various preform manufacturing aspects influence the overall composite m...

  10. Anisotropy of torsional rigidity of sheet polymer composite materials

    Science.gov (United States)

    Startsev, O. V.; Kovalenko, A. A.; Nasonov, A. D.

    1999-05-01

    Wide application of polymer composite materials (PCM) in modern technology calls for detailed evaluation of their stress-strain properties in a broad temperature range. To obtain such information, we use the dynamic mechanical analysis and with the help of a reverse torsion pendulum measure the dynamic torsional rigidity of PCM bars of rectangular cross section in the temperature range up to 600 K. It is found that the temperature dependences of the dynamic rigidity of the calculated values of dynamic shear moduli are governed by the percentage and properties of the binder and fibers, the layout of fibers, the phase interaction along interfaces, etc. The principles of dynamic mechanical spectrometry are used to substantiate and analyze the parameters of anisotropy by which the behavior of a composite can be described in the temperature range including the transition of the binder from the glassy into a highly elastic state. For this purpose, the values of dynamic rigidity are measured under low-amplitude vibrations of the PCM specimens with a fiber orientation angle from 0 to 90°. It is shown that for unidirectional composites the dependence between the dynamic rigidity and the fiber orientation angle is of extreme character. The value and position of the peak depend on the type of the binder and fibers and change with temperature. It is found that the anisotropy degree of PCM is dictated by the molecular mobility and significantly changes in the temperature range of transition of the binder and reinforcement from the glassy into a highly elastic state (in the case of SVM fibers). The possibility of evaluating the anisotropy of composites with other reinforcement schemes, in particular, of orthogonally reinforced PCMs, is shown.

  11. Conductive polymer and Si nanoparticles composite secondary particles and structured current collectors for high loading lithium ion negative electrode application

    Science.gov (United States)

    Liu, Gao

    2017-07-11

    Embodiments of the present invention disclose a composition of matter comprising a silicon (Si) nanoparticle coated with a conductive polymer. Another embodiment discloses a method for preparing a composition of matter comprising a plurality of silicon (Si) nanoparticles coated with a conductive polymer comprising providing Si nanoparticles, providing a conductive polymer, preparing a Si nanoparticle, conductive polymer, and solvent slurry, spraying the slurry into a liquid medium that is a non-solvent of the conductive polymer, and precipitating the silicon (Si) nanoparticles coated with the conductive polymer. Another embodiment discloses an anode comprising a current collector, and a composition of matter comprising a silicon (Si) nanoparticle coated with a conductive polymer.

  12. Physics in ``Polymers, Composites, and Sports Materials" an Interdisciplinary Course

    Science.gov (United States)

    Hagedorn, Eric; Suskavcevic, Milijana

    2007-10-01

    The undergraduate science course described uses the themes of polymers and composites, as used in sports materials, to teach some key concepts in introductory chemistry and physics. The course is geared towards students who are interested in science, but are still completing prerequisite mathematics courses required for science majors. Each class is built around a laboratory activity. Atoms, molecules and chemical reactions are taught in reference to making polyvinyl acetate (white glue) and polyvinyl alcohol (gel glue). These materials, combined with borax, form balls which are subsequently used in physics activities centered on free-fall and the coefficient of restitution. These activities allow the introduction of kinematics and dynamics. A free fall activity involving ice pellets, with and without embedded tissue paper, illustrates the properties of composites. The final series of activities uses balls, shoes, racquets and bats to further illustrate dynamics concepts (including friction, momentum and energy). The physical properties of these sports objects are discussed in terms of the materials of which they are made. The evaluation plan to determine the effectiveness of these activities and preliminary results are also presented.

  13. Biocompatible silk-conducting polymer composite trilayer actuators

    Science.gov (United States)

    Fengel, Carly V.; Bradshaw, Nathan P.; Severt, Sean Y.; Murphy, Amanda R.; Leger, Janelle M.

    2017-05-01

    Biocompatible materials capable of controlled actuation are in high demand for use in biomedical applications such as dynamic tissue scaffolding, valves, and steerable surgical tools. Conducting polymer actuators are of interest because they operate in aqueous electrolytes at low voltages and can generate stresses similar to natural muscle. Recently, our group has demonstrated a composite material of silk and poly(pyrrole) (PPy) that is mechanically robust, made from biocompatible materials, and bends under an applied voltage when incorporated into a simple bilayer device architecture and actuated using a biologically relevant electrolyte. Here we present trilayer devices composed of two silk-PPy composite layers separated by an insulating silk layer. The trilayer architecture allows one side to expand while the other contracts, resulting in improved performance over bilayer devices. Specifically, this configuration shows a larger angle of deflection per volt applied than the analogous bilayer system, while maintaining a consistent current response throughout cycling. In addition, the overall motion of the trilayer devices is more symmetric than that of the bilayer analogs, allowing for fully reversible operation.

  14. Electrically Conducting Polymer-Copper Sulphide Composite Films, Preparation by Treatment of Polymer-Copper (2) Acetate Composites with Hydrogen Sulfide

    Science.gov (United States)

    Yamamoto, Takakazu; Kamigaki, Takahira; Kubota, Etsuo

    1988-01-01

    Polymer copper sulfide composite films were prepared by treatment of polymer poly(vinyl chloride), poly(acrylonitrile), copolymer of vinyl chloride and vinyl acetate (90:10), and ABS resin copper (2) acetate composites with hydrogen sulfide. The films showed electrical conductivity higher than 0.015 S/cm when they contained more than 20 wt percent of copper sulfide. A poly(acrylonitrile)-copper sulfide composite film containing 40 to 50 wt percent of copper sulfide showed electrical conductivity of 10 to 150.0 S/cm and had relatively high mechanical strength to be used in practical purposes.

  15. Nanoscale indentation of polymer and composite polymer-silica core-shell submicrometer particles by atomic force microscopy.

    Science.gov (United States)

    Armini, Silvia; Vakarelski, Ivan U; Whelan, Caroline M; Maex, Karen; Higashitani, Ko

    2007-02-13

    Atomic force microscopy was employed to probe the mechanical properties of surface-charged polymethylmethacrylate (PMMA)-based terpolymer and composite terpolymer core-silica shell particles in air and water media. The composite particles were achieved with two different approaches: using a silane coupling agent (composite A) or attractive electrostatic interactions (composite B) between the core and the shell. Young's moduli (E) of 4.3+/-0.7, 11.1+/-1.7, and 8.4+/-1.7 GPa were measured in air for the PMMA-based terpolymer, composite A, and composite B, respectively. In water, E decreases to 1.6+/-0.2 GPa for the terpolymer; it shows a slight decrease to 8.0+/-1.2 GPa for composite A, while it decreases to 2.9+/-0.6 GPa for composite B. This trend is explained by considering a 50% swelling of the polymer in water confirmed by dynamic light scattering. Close agreement is found between the absolute values of elastic moduli determined by nanoindentation and known values for the corresponding bulk materials. The thickness of the silica coating affects the mechanical properties of composite A. In the case of composite B, because the silica shell consists of separate particles free to move in the longitudinal direction that do not individually deform when the entire composite deforms, the elastic properties of the composites are determined exclusively by the properties of the polymer core. These results provide a basis for tailoring the mechanical properties of polymer and composite particles in air and in solution, essential in the design of next-generation abrasive schemes for several technological applications.

  16. Effect of Biomass Waste Filler on the Dielectric Properties of Polymer Composites

    Directory of Open Access Journals (Sweden)

    Yew Been Seok

    2016-07-01

    Full Text Available The effect of biomass waste fillers, namely coconut shell (CS and sugarcane bagasse (SCB on the dielectric properties of polymer composite was investigated. The aim of this study is to investigate the potential of CS and SCB to be used as conductive filler (natural source of carbon in the polymer composite. The purpose of the conductive filler is to increase the dielectric properties of the polymer composite. The carbon composition the CS and SCB was determine through carbon, hydrogen, nitrogen and sulphur (CHNS elemental analysis whereas the structural morphology of CS and SCB particles was examined by using scanning electron microscope. Room temperature open-ended coaxial line method was used to determine the dielectric constant and dielectric loss factor over broad band frequency range of 200 MHz-20 GHz. Based on this study, the results found that CS and SCB contain 48% and 44% of carbon, which is potentially useful to be used as conductive elements in the polymer composite. From SEM morphology, presence of irregular shape particles (size ≈ 200 μm and macroporous structure (size ≈ 2.5 μm were detected on CS and SCB. For dielectric properties measurement, it was measured that the average dielectric constant (ε' is 3.062 and 3.007 whereas the average dielectric loss factor (ε" is 0.282 and 0.273 respectively for CS/polymer and SCB/polymer composites. The presence of the biomass waste fillers have improved the dielectric properties of the polymer based composite (ε' = 2.920, ε" = 0.231. However, the increased in the dielectric properties is not highly significant, i.e. up to 4.86 % increase in ε' and 20% increase in ε". The biomass waste filler reinforced polymer composites show typical dielectric relaxation characteristic at frequency of 10 GHz - 20 GHz and could be used as conducting polymer composite for suppressing EMI at high frequency range.

  17. Molecular and structural properties of polymer composites filled with activated charcoal particles

    Energy Technology Data Exchange (ETDEWEB)

    Tahir, Dahlang, E-mail: dtahir@fmipa.unhas.ac.id; Bakri, Fahrul [Department of Physics, Hasanuddin University, Makassar 90245 Indonesia (Indonesia); Liong, Syarifuddin [Department of Chemistry, Hasanuddin University, Makassar 90245 Indonesia (Indonesia)

    2016-03-11

    We have studied the molecular properties, structural properties, and chemical composition of composites by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) spectroscopy, and X-ray fluorescence (XRF) spectroscopy, respectively. FTIR spectra shows absorption band of hydroxyl group (-OH), methyl group (-CH{sub 3}) and aromatic group (C-C). The absorption band for aromatic group (C-C) shows the formation of carbonaceous in composites. XRF shows chemical composition of composites, which the main chemicals are SO{sub 3}, Cl, and ZnO. The loss on ignition value (LOI) of activated charcoal indicates high carbonaceous matter. The crystallite size for diffraction pattern from hydrogel polymer is about 17 nm and for activated charcoal are about 19 nm. The crystallite size of the polymer is lower than that of activated charcoal, which make possible of the particle from filler in contact with each other to form continuous conducting polymer through polymer matrix.

  18. Molecular and structural properties of polymer composites filled with activated charcoal particles

    Science.gov (United States)

    Tahir, Dahlang; Liong, Syarifuddin; Bakri, Fahrul

    2016-03-01

    We have studied the molecular properties, structural properties, and chemical composition of composites by Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) spectroscopy, and X-ray fluorescence (XRF) spectroscopy, respectively. FTIR spectra shows absorption band of hydroxyl group (-OH), methyl group (-CH3) and aromatic group (C-C). The absorption band for aromatic group (C-C) shows the formation of carbonaceous in composites. XRF shows chemical composition of composites, which the main chemicals are SO3, Cl, and ZnO. The loss on ignition value (LOI) of activated charcoal indicates high carbonaceous matter. The crystallite size for diffraction pattern from hydrogel polymer is about 17 nm and for activated charcoal are about 19 nm. The crystallite size of the polymer is lower than that of activated charcoal, which make possible of the particle from filler in contact with each other to form continuous conducting polymer through polymer matrix.

  19. Quinoxaline polymers and copolymers derived from 1,4-bis(1'-naphthalenyloxalyl)benzene and their graphite composites. [polymer chemistry and polymer physics

    Science.gov (United States)

    Port, W. S.

    1976-01-01

    Experimental studies were performed with new polyquinoxalines and their graphite composites. Four polymers were synthesized, and then were characterized with respect to their inherent viscosity, elemental chemical analysis, mechanical, and thermodynamic properties. Structural formulas of the polymers and their precursors are given; methods of synthesis are described; and specifically examined was the preparation of polymers from 3,3' diamino-benzidine from 1,4- and 1,3- bis ((1'-napthalenyl) oxalyl) benzene respectively. Also considered was the preparation of polyquinoxalines from poly (p-benzil), and 1,2- aryldiamines.

  20. Thermal Expansion and Diffusion Coefficients of Carbon Nanotube-Polymer Composites

    Science.gov (United States)

    Wei, Chengyu; Srivastava, Deepak; Cho, Kyeongjae; Biegel, Bryan (Technical Monitor)

    2001-01-01

    Classical molecular dynamics (MD) simulations employing Brenner potential for intra-nanotube interactions and van der Waals forces for polymer-nanotube interface have been used to investigate thermal expansion and diffusion characteristics of carbon nanotube-polyethylene composites. Addition of carbon nanotubes to polymer matrix is found to significantly increase the glass transition temperature Tg, and thermal expansion and diffusion coefficients in the composite above Tg. The increase has been attributed to the temperature dependent increase of the excluded volume for the polymer chains, and the findings could have implications in the composite processing, coating and painting applications.

  1. Preparation of CdTe nanocrystal-polymer composite microspheres in aqueous solution by dispersing method

    Institute of Scientific and Technical Information of China (English)

    LI Minjie; WANG Chunlei; HAN Kun; YANG Bai

    2005-01-01

    Highly fluorescent CdTe nanocrystals were synthesized in aqueous solution, and then processible CdTe nanocrystal-polymer composites were fabricated by coating the aqueous nanocrystals with copolymers of styrene and octadecyl-p-vinyl-benzyldimethylammonium chloride (SOV- DAC) directly. A dichloromethane solution of CdTe nano- crystal-polymer composites was dispersed in the aqueous solution of poly (vinyl alcohol) (PVA) generating highly fluorescent microspheres. Experimental parameters such as the concentration of nanocrystal-polymer composites, the concentration of PVA, and stirring speed which had important effect on the preparation of the microspheres were investigated in detail with fluorescent microscope characterization.

  2. Detection of Localized Heat Damage in a Polymer Matrix Composite by Thermo-Elastic Method (Preprint)

    Science.gov (United States)

    2007-02-01

    AFRL-ML-WP-TP-2007-437 DETECTION OF LOCALIZED HEAT DAMAGE IN A POLYMER MATRIX COMPOSITE BY THERMO-ELASTIC METHOD (PREPRINT) John Welter...GRANT NUMBER 4. TITLE AND SUBTITLE DETECTION OF LOCALIZED HEAT DAMAGE IN A POLYMER MATRIX COMPOSITE BY THERMO-ELASTIC METHOD (PREPRINT) 5c...Include Area Code) N/A Standard Form 298 (Rev. 8-98) Prescribed by ANSI Std. Z39-18 1 DETECTION OF LOCALIZED HEAT DAMAGE IN A POLYMER MATRIX COMPOSITE BY

  3. Determination of the effective refractive index of porous silicon/polymer composite films

    Institute of Scientific and Technical Information of China (English)

    Zhenhong Jia

    2005-01-01

    The equation for calculating the effective refractive index of porous silicon inserted polymer was obtained by three-component Bruggeman effective medium model. The dependence of the effective refractive index of porous silicon/polymer composite films on the polymer fraction with various initial porosity was given theorically and experimentally respectively. The porous silicon and polymer polymethylmetacrylate based dispersive red one (PMMA/DR1) composite films were fabricated in our experiments. It is found that the measured effective refractive index of porous silicon inserted polymer was slightly lower than the calculated result because of the oxidization of porous silicon. The effective refractive index of oxidized porous silicon inserted polymer also was analyzed by four-component medium system.

  4. MAXIMSUPER: a computer program to assist in the design of multifilamentary superconducting composites. [Nb/sub 3/Sn

    Energy Technology Data Exchange (ETDEWEB)

    Hoard, R.W.; Scanlan, R.M.; Hirzel, D.G.

    1979-07-03

    The strain degradation of critical current density has been analytically and experimentally investigated for multifilamentary superconducting composites produced in a bronze core geometry. Analytic results were obtained from a computer program (MAXIMSUPER) which predicts the stresses and strains in composites as a result of thermal and axial loading. Tensile test data for Nb/sub 3/Sn are described. It is believed that the strain dependence of the critical current found in Nb/sub 3/Sn is due to strain enhanced martensitic transformation.

  5. Development of the conductive polymer matrix composite with low concentration of the conductive filler

    Energy Technology Data Exchange (ETDEWEB)

    Hao Xiangyang [School of Materials Sciences and Technology, China University of Geosciences, Beijing 100083 (China); Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)], E-mail: haoxy@tsinghua.edu.cn; Gai Guosheng; Yang Yufen [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Zhang Yihe [School of Materials Sciences and Technology, China University of Geosciences, Beijing 100083 (China); Nan Cewen [Department of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China)

    2008-05-15

    Composite particles with ultra-high molecular polyethylene (UHMWPE) core and carbon black (CB) or carbon nanotube (CNT) shell were produced by particle composite system, then molded into conductive polymer composites. Morphology of these composite particles was investigated by scanning electron microscopy (SEM). Matrix particles are coated with CB or CNTs very well. And CNTs are not being cut short. The results of electrical behavior study show that these polymer composites have low percolation threshold. Conductive networks of CB and CNT were seen by optical microscopy. Related mechanism is discussed.

  6. Antimicrobial polymers - The antibacterial effect of photoactivated nano titanium dioxide polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Huppmann, T., E-mail: teresa.huppmann@tum.de; Leonhardt, S., E-mail: stefan.leonhardt@mytum.de, E-mail: erhard.krampe@tum.de; Krampe, E., E-mail: stefan.leonhardt@mytum.de, E-mail: erhard.krampe@tum.de; Wintermantel, E., E-mail: wintermantel@tum.de [Institute of Medical and Polymer Engineering, Technische Universität München (Germany); Yatsenko, S., E-mail: s.yatsenko@skz.de; Radovanovic, I., E-mail: i.radovanovic@skz.de, E-mail: m.bastian@skz.de; Bastian, M., E-mail: i.radovanovic@skz.de, E-mail: m.bastian@skz.de [SKZ- German Plastics Center, Würzburg (Germany)

    2014-05-15

    To obtain a polymer with antimicrobial properties for medical and sanitary applications nanoscale titanium dioxide (TiO{sub 2}) particles have been incorporated into a medical grade polypropylene (PP) matrix with various filler contents (0 wt %, 2 wt %, 10 wt % and 15 wt %). The standard application of TiO{sub 2} for antimicrobial efficacy is to deposit a thin TiO{sub 2} coating on the surface. In contrast to the common way of applying a coating, TiO{sub 2} particles were applied into the bulk polymer. With this design we want to ensure antimicrobial properties even after application of impact effects that could lead to surface defects. The filler material (Aeroxide® TiO{sub 2} P25, Evonik) was applied via melt compounding and the compounding parameters were optimized with respect to nanoscale titanium dioxide. In a next step the effect of UV-irradiation on the compounds concerning their photocatalytic activity, which is related to the titanium dioxide amount, was investigated. The photocatalytic effect of TiO{sub 2}-PP-composites was analyzed by contact angle measurement, by methylene blue testing and by evaluation of inactivation potential for Escherichia coli (E.coli) bacteria. The dependence of antimicrobial activity on the filler content was evaluated, and on the basis of different titanium dioxide fractions adequate amounts of additives within the compounds were discussed. Specimens displayed a higher photocatalytic and also antimicrobial activity and lower contact angles with increasing titania content. The results suggest that the presence of titania embedded in the PP matrix leads to a surface change and a photocatalytic effect with bacteria killing result.

  7. Antimicrobial polymers - The antibacterial effect of photoactivated nano titanium dioxide polymer composites

    Science.gov (United States)

    Huppmann, T.; Yatsenko, S.; Leonhardt, S.; Krampe, E.; Radovanovic, I.; Bastian, M.; Wintermantel, E.

    2014-05-01

    To obtain a polymer with antimicrobial properties for medical and sanitary applications nanoscale titanium dioxide (TiO2) particles have been incorporated into a medical grade polypropylene (PP) matrix with various filler contents (0 wt %, 2 wt %, 10 wt % and 15 wt %). The standard application of TiO2 for antimicrobial efficacy is to deposit a thin TiO2 coating on the surface. In contrast to the common way of applying a coating, TiO2 particles were applied into the bulk polymer. With this design we want to ensure antimicrobial properties even after application of impact effects that could lead to surface defects. The filler material (Aeroxide® TiO2 P25, Evonik) was applied via melt compounding and the compounding parameters were optimized with respect to nanoscale titanium dioxide. In a next step the effect of UV-irradiation on the compounds concerning their photocatalytic activity, which is related to the titanium dioxide amount, was investigated. The photocatalytic effect of TiO2-PP-composites was analyzed by contact angle measurement, by methylene blue testing and by evaluation of inactivation potential for Escherichia coli (E.coli) bacteria. The dependence of antimicrobial activity on the filler content was evaluated, and on the basis of different titanium dioxide fractions adequate amounts of additives within the compounds were discussed. Specimens displayed a higher photocatalytic and also antimicrobial activity and lower contact angles with increasing titania content. The results suggest that the presence of titania embedded in the PP matrix leads to a surface change and a photocatalytic effect with bacteria killing result.

  8. Preparation of Composite Films of a Conjugated Polymer and C60NWs and Their Photovoltaic Application

    Directory of Open Access Journals (Sweden)

    Takatsugu Wakahara

    2016-01-01

    Full Text Available Composite films of conjugated polymers, such as poly[2-methoxy-5-(3′,7′-dimethyloctyloxy-1,4-phenylenevinylene] (MDMO-PPV and poly(3-hexylthiophene (P3HT, with C60 nanowhiskers (C60NWs were prepared. The photoluminescence originating from the conjugated MDMO-PPV polymers was effectively quenched in the composite film, indicating a strong interaction between the conjugated polymer and C60NWs. The photovoltaic devices were fabricated using C60NW (conjugated polymer composite films, resulting in a power conversion efficiency of ~0.01% for P3HT with short length thin C60NWs, which is higher than that previously reported for thick C60 nanorods. The present study gives new guidance on the selection of the type of C60NWs and the appropriate polymer for new photovoltaic devices.

  9. Relationship between Polymer Dielectric Constant and Percolation Threshold in Conductive Poly(styrene-Type Polymer and Carbon Black Composites

    Directory of Open Access Journals (Sweden)

    Mariana Castro Martínez

    2015-01-01

    Full Text Available We study the effect of dielectric constant of some poly(styrene-type polymer matrix on the percolation threshold in conductive polymer composites with carbon black (CB. We demonstrate that percolation threshold diminishes with an increment of the dielectric constant of polymer matrix. We chose polystyrene and other three polymers similar in structure and molecular weight but with different chemical nature. The corresponding dielectric constant and critical concentration, Xc, in volume fraction of carbon black, v/v CB, were the following: 4MePS (ε=2.43; Xc=0.058, PS (ε=2.60; Xc=0.054, 4BrPS (ε=2.82; Xc=0.051, and 4ClPS (ε=2.77; Xc=0.047. The correlation between both parameters confirms that the percolation threshold decreases while the dielectric constant increases. At microscopic level, this effect is attributed to an enhanced physical interaction of the CB particles with the asymmetric electric density produced by electronegative or inductive atoms/groups. Therefore, by controlling the chemical structure of the polymer matrix, the attraction forces between the polar groups on the carbon black surface particles with those of the polymer matrix can be improved, which in turn induces a better disaggregation and dispersion of those particles into the polymer matrix, allowing the percolation threshold reached at a lower filling fraction.

  10. Composites based on cellulose fiber nonwovens and a water-soluble polymer 2. Strength-deformation characteristics of the composites

    Science.gov (United States)

    Cerpakovska, D.; Kalnins, M.

    2012-09-01

    The relationship between the strength-deformation properties and certain structural characteristics (volume content of polymer and voids, orientation of fibers) of composites prepared by impregnation of cellulose fiber nonwovens (CFNs) with poly(vinyl alcohol) water solutions is discussed. With growth in the volume fraction of polymer to 0.25-0.30, the tensile elastic modulus and ultimate strength of the composites increase compared with those of CFN. As a consequence of enhanced adhesion among the cellulose fibers, the relative values of tensile strength and elastic modulus in the main orientation direction of the fibers is higher than in the perpendicular one. Therefore, with increasing content of polymer in the composite, its degree of anisotropy diminishes significantly. The punching strength almost linearly correlates with the tensile strength. The breaking strain in tension increases considerably with growing content of polymer, but the tearing strength changes only slightly.

  11. Polymer nanocomposites for high-temperature composite repair

    Energy Technology Data Exchange (ETDEWEB)

    Sheng, Xia [Iowa State Univ., Ames, IA (United States)

    2008-01-01

    A novel repair agent for resin-injection repair of advanced high temperature composites was developed and characterized. The repair agent was based on bisphenol E cyanate ester (BECy) and reinforced with alumina nanoparticles. To ensure good dispersion and compatibility with the BECy matrix in nanocomposites, the alumina nanoparticles were functionalized with silanes. The BECy nanocomposites, containing bare and functionalized alumina nanoparticles, were prepared and evaluated for their thermal, mechanical, rheological, and viscoelastic properties. The monomer of BECy has an extremely low viscosity at ambient temperature, which is good for processability. The cured BECy polymer is a highly cross-linked network with excellent thermal mechanical properties, with a high glass transition temperature (Tg) of 270 C and decomposition temperature above 350 C. The incorporation of alumina nanoparticles enhances the mechanical and rheological properties of the BECy nanocomposites. Additionally, the alumina nanoparticles are shown to catalyze the cure of BECy. Characterization of the nanocomposites included dynamic mechanical analysis, differential scanning calorimetry, thermogravimetric analysis, rheological and rheokinetic evaluation, and transmission electron microscopy. The experimental results show that the BECy nanocomposite is a good candidate as repair agent for resin-injection repair applications.

  12. Fluid flow sensing with ionic polymer-metal composites

    Science.gov (United States)

    Stalbaum, Tyler; Trabia, Sarah; Shen, Qi; Kim, Kwang J.

    2016-04-01

    Ionic polymer-metal composite (IPMC) actuators and sensors have been developed and modeled over the last two decades for use as soft-robotic deformable actuators and sensors. IPMC devices have been suggested for application as underwater actuators, energy harvesting devices, and medical devices such as in guided catheter insertion. Another interesting application of IPMCs in flow sensing is presented in this study. IPMC interaction with fluid flow is of interest to investigate the use of IPMC actuators as flow control devices and IPMC sensors as flow sensing devices. An organized array of IPMCs acting as interchanging sensors and actuators could potentially be designed for both flow measurement and control, providing an unparalleled tool in maritime operations. The underlying physics for this system include the IPMC ion transport and charge fundamental framework along with fluid dynamics to describe the flow around IPMCs. An experimental setup for an individual rectangular IPMC sensor with an externally controlled fluid flow has been developed to investigate this phenomenon and provide further insight into the design and application of this type of device. The results from this portion of the study include recommendations for IPMC device designs in flow control.

  13. Bio-applications of ionic polymer metal composite transducers

    Science.gov (United States)

    Aw, K. C.; McDaid, A. J.

    2014-07-01

    Traditional robotic actuators have advanced performance which in some aspects can surpass that of humans, however they are lacking when it comes to developing devices which are capable of operating together with humans. Bio-inspired transducers, for example ionic polymer metal composites (IPMC), which have similar properties to human tissue and muscle, demonstrate much future promise as candidates for replacing traditional robotic actuators in medical robotics applications. This paper outlines four biomedical robotics applications, an IPMC stepper motor, an assistive glove exoskeleton/prosthetic hand, a surgical robotic tool and a micromanipulation system. These applications have been developed using mechanical design/modelling techniques with IPMC ‘artificial muscle’ as the actuation system. The systems are designed by first simulating the performance using an IPMC model and dynamic models of the mechanical system; the appropriate advanced adaptive control schemes are then implemented to ensure that the IPMCs operate in the correct manner, robustly over time. This paper serves as an overview of the applications and concludes with some discussion on the future challenges of developing real-world IPMC applications.

  14. Synthesis of Dichloride-Diphenylacetonitrile Palladium and Metal-Polymer Composite Based on Uhmwpe

    Directory of Open Access Journals (Sweden)

    A. M. Nemeryuk

    2016-05-01

    Full Text Available New complex of Pd (II with phenylacetonitrile, suitable for use as a precursor of palladium nano particles in the composition of metal-based composite UHMWPE was obtained. The thermodynamic characteristics of metal-polymer composite, found the effect of nano particles of palladium in the crystallization processes in UHMWPE and other characteristics of the material.

  15. A novel composite microporous polymer electrolyte prepared with molecule sieves for Li-ion batteries

    Science.gov (United States)

    Jiang, Yan-Xia; Chen, Zuo-Feng; Zhuang, Quan-Chao; Xu, Jin-Mei; Dong, Quan-Feng; Huang, Ling; Sun, Shi-Gang

    Molecular sieves of NaY, MCM-41, and SBA-15 were used as fillers in a poly(vinylidene fluoride- co-hexafluoropropylene) (PVdF-HFP) copolymer matrix to prepare microporous composite polymer electrolyte. The SBA-15-based composite polymer film was found to show rich pores that account for an ionic conductivity of 0.50 mS cm -1. However, the MCM-41 and NaY composite polymer films exhibited compact structure without any pores, and the addition of MCM-41 even resulted in aggregation of fillers in the polymer matrix. These differences were investigated and interpreted by their different compatibility with DMF solvent and PVdF-HFP matrix. Results of linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and differential scanning calorimetry (DSC) have revealed that the addition of SBA-15 has extended the electrochemical stability window of polymer electrolyte, enhanced the interfacial stability of polymer electrolyte with lithium electrode, and inhibited also the crystallization of PVdF-HFP matrix. Half-cell of Li/SBA-15-based polymer electrolyte/MCF was assembled and tested. The results have demonstrated that the coulombic efficiency of the first cycle was around 87.0% and the cell remains 94.0% of the initial capacity after 20 cycles, which showed the potential application of the composite polymer electrolyte in lithium ion batteries.

  16. A novel composite microporous polymer electrolyte prepared with molecule sieves for Li-ion batteries

    Energy Technology Data Exchange (ETDEWEB)

    Jiang, Yan-Xia; Chen, Zuo-Feng; Zhuang, Quan-Chao; Xu, Jin-Mei; Dong, Quan-Feng; Huang, Ling; Sun, Shi-Gang [State Key Laboratory of Physical Chemistry of Solid Surfaces, Department of Chemistry, College of Chemistry and Chemical Engineering, Xiamen University, 422, South Road of Siming, Xiamen 361005 (China)

    2006-10-06

    Molecular sieves of NaY, MCM-41, and SBA-15 were used as fillers in a poly(vinylidene fluoride-co-hexafluoropropylene) (PVdF-HFP) copolymer matrix to prepare microporous composite polymer electrolyte. The SBA-15-based composite polymer film was found to show rich pores that account for an ionic conductivity of 0.50mScm{sup -1}. However, the MCM-41 and NaY composite polymer films exhibited compact structure without any pores, and the addition of MCM-41 even resulted in aggregation of fillers in the polymer matrix. These differences were investigated and interpreted by their different compatibility with DMF solvent and PVdF-HFP matrix. Results of linear sweep voltammetry (LSV), electrochemical impedance spectroscopy (EIS), X-ray diffraction (XRD) and differential scanning calorimetry (DSC) have revealed that the addition of SBA-15 has extended the electrochemical stability window of polymer electrolyte, enhanced the interfacial stability of polymer electrolyte with lithium electrode, and inhibited also the crystallization of PVdF-HFP matrix. Half-cell of Li/SBA-15-based polymer electrolyte/MCF was assembled and tested. The results have demonstrated that the coulombic efficiency of the first cycle was around 87.0% and the cell remains 94.0% of the initial capacity after 20 cycles, which showed the potential application of the composite polymer electrolyte in lithium ion batteries. (author)

  17. Structural and functional polymer-matrix composites for electromagnetic applications

    Science.gov (United States)

    Wu, Junhua

    This dissertation addresses the science and technology of functional and structural polymer-matrix composite materials for electromagnetic applications, which include electromagnetic interference (EMI) shielding and low observability (Stealth). The structural composites are continuous carbon fiber epoxy-matrix composites, which are widely used for airframes. The functional composites are composites with discontinuous fillers and in both bulk and coating forms. Through composite structure variation, attractive electromagnetic properties have been achieved. With no degradation of the tensile strength or modulus, the shielding effectiveness of the structural composites has been improved by enhancing multiple reflections through light activation of the carbon fiber. The multiple reflections loss of the electromagnetic wave increases from 1.1 to 10.2 dB at 1.0 GHz due to the activation. Such a large effect of multiple reflections has not been previously reported in any material. The observability of these composites has been lowered by decreasing the electrical conductivity (and hence decreasing the reflection loss) through carbon fiber coating. The incorporation of mumetal, a magnetic alloy particulate filler (28-40 mum size), in a latex paint has been found to be effective for enhancing the shielding only if the electrical resistivity of the resulting composite coating is below 10 O.cm, as rendered by a conductive particulate filler, such as nickel flake (14-20 mum size). This effectiveness (39 dB at 1.0 GHz) is attributed to the absorption of the electromagnetic wave by the mumetal and the nickel flake, with the high conductivity rendered by the presence of the nickel flake resulting in a relatively high reflection loss of 15.5 dB. Without the nickel flake, the mumetal gives only 3 dB of shielding and 1.5 dB of reflection loss at 1.0 GHz. Nickel powder (0.3-0.5 mum size) has been found to be an effective filler for improving the shielding of polyethersulfone (PES

  18. Boswellia gum resin/chitosan polymer composites: Controlled delivery vehicles for aceclofenac.

    Science.gov (United States)

    Jana, Sougata; Laha, Bibek; Maiti, Sabyasachi

    2015-01-01

    This study was undertaken to evaluate the effect of Boswellia gum resin on the properties of glutaraldehyde (GA) crosslinked chitosan polymer composites and their potential as oral delivery vehicles for a non-steroidal anti-inflammatory drug, aceclofenac. The incorporation of resinous material caused a significant improvement in drug entrapment efficiency (∼40%) of the polymer composites. Fourier transform infrared (FTIR) spectroscopic analysis confirmed the formation of chitosan-gum resin composites and did not show any evidence of drug-polymer chemical interaction. Field emission scanning electron microscopy (FE-SEM) suggested the formation of particulate polymer composites up to chitosan:gum resin mass ratio of 1:3. Only 8-17% drug was released into HCl solution (pH 1.2) in 2h. The drug release rate of polymer composites was faster in phosphate buffer solution (pH 6.8). The composites released ∼60-68% drug load in 7h. In same duration, the drug release rate suddenly boosted up to 92% as the concentration of gum resin in the composites was raised to 80%. The drug release mechanism deviated from non-Fickian to case-II type with increasing resin concentration in the composites. Hence, GA-treated Boswellia resin-chitosan composites could be considered as alternative vehicles for oral delivery of aceclofenac.

  19. Detecting and identifying damage in sandwich polymer composite by using acoustic emission

    DEFF Research Database (Denmark)

    McGugan, M.; Sørensen, Bent F.; Østergaard, R.

    2006-01-01

    Acoustic emission is a useful monitoring tool for extracting extra information during mechanical testing of polymer composite sandwich materials. The study of fracture mechanics within test specimens extracted from wind turbine blade material ispresented. The contribution of the acoustic emission...

  20. Modeling of nano-reinforced polymer composites: Microstructure effect on Young’s modulus

    DEFF Research Database (Denmark)

    Peng, R.D.; Zhou, H.W.; Wang, H.W.;

    2012-01-01

    A computational numerical-analytical model of nano-reinforced polymer composites is developed taking into account the interface and particle clustering effects. The model was employed to analyze the interrelationships between microstructures and mechanical properties of nanocomposites. An improved...

  1. Synthesis and Characterization of Ca, Mg, La- PMMA Polymer Composites for Phosphate Removal

    Science.gov (United States)

    In this study calcium, magnesium and lanthanum- PMMA polymer composites were synthesized, characterized and investigated for phosphate removal from wastewater using rapid small scale column tests. Theoretical and experimental capacity of the media was determined and unused and sp...

  2. Physico-mechanical and tribological properties of Grewia Optiva fiber/bio-particulates hybrid polymer composites

    Science.gov (United States)

    Kumar, Sandeep; Gangil, Brijesh; Patel, Vinay Kumar

    2016-05-01

    Lack of resources and increasing environmental issues has received widespread attention for the development of natural fiber/ particulate reinforced hybrid polymer composites. In the present investigation the authors use (GO) Grewia Optiva as the main reinforcement and rice husk/wheat straw as additional particulates for improving the mechanical and wear properties of polymer composites. The samples were prepared by hand layup technique according to ASTM standards. The results indicated that incorporation of wheat straw with GO polymer materials exhibited better hardness (2.5 times harder) and less wear (0.85 times) than mono GO fiber polymer composites (GOFRP). Moreover, Rice husk filled GOFRP shows superior impact energy among the all set of composites. Water absorption behavior was also discussed in this investigation.

  3. An Investigation of the Electrochemical Behavior of Graphite Fiber-Polymer Composites.

    Science.gov (United States)

    1982-04-01

    The factors influencing the use and stability of graphite fiber polymer matrix composite electrodes have been determined. Several possible uses of these electrodes have been examined for scientific feasibility.

  4. Blood-clotting-inspired reversible polymer-colloid composite assembly in flow

    National Research Council Canada - National Science Library

    Chen, Hsieh; Fallah, Mohammad A; Huck, Volker; Angerer, Jennifer I; Reininger, Armin J; Schneider, Stefan W; Schneider, Matthias F; Alexander-Katz, Alfredo

    2013-01-01

    .... The formation of such a plug, which is essentially a (bio)polymer-colloid composite, is believed to be driven by shear flow in its initial phase, and contrary to our intuition, its assembly is enhanced under stronger flowing conditions...

  5. Blood-clotting-inspired reversible polymer-colloid composite assembly in flow

    Science.gov (United States)

    Chen, Hsieh; Fallah, Mohammad A.; Huck, Volker; Angerer, Jennifer I.; Reininger, Armin J.; Schneider, Stefan W.; Schneider, Matthias F.; Alexander-Katz, Alfredo

    2013-01-01

    Blood clotting is a process by which a haemostatic plug is assembled at the site of injury. The formation of such a plug, which is essentially a (bio)polymer-colloid composite, is believed to be driven by shear flow in its initial phase, and contrary to our intuition, its assembly is enhanced under stronger flowing conditions. Here, inspired by blood clotting, we show that polymer-colloid composite assembly in shear flow is a universal process that can be tailored to obtain different types of aggregates including loose and dense aggregates, as well as hydrodynamically induced ‘log’-type aggregates. The process is highly controllable and reversible, depending mostly on the shear rate and the strength of the polymer-colloidbinding potential. Our results have important implications for the assembly of polymer-colloid composites, an important challenge of immense technological relevance. Furthermore, flow-driven reversible composite formation represents a new paradigm in non-equilibrium self-assembly.

  6. Polystyrene-Al2O3 composite solid polymer electrolyte for lithium secondary battery

    National Research Council Canada - National Science Library

    Lim, Yu-Jeong; An, Yu-Ha; Jo, Nam-Ju

    2012-01-01

    .... However, in this PS-based composite polymer-in-salt system, the transport of cations is not by segmental motion but by ion-hopping through a lithium percolation path made of high content lithium salt...

  7. Superconductivity of Ag-added composites of Hg-1223 grained Bean model

    Energy Technology Data Exchange (ETDEWEB)

    Kubo, M.; Akune, T. [Department of Electrical Engineering, Kyushu Sangyo University, 2-3-1 Matsukadai, 813-8503 Fukuoka (Japan); Sakamoto, N. [Department of Electrical Engineering, Kyushu Sangyo University, 2-3-1 Matsukadai, 813-8503 Fukuoka (Japan)], E-mail: saka@te.kyusan-u.ac.jp; Khan, H.R. [Institut von Ionenstrahl und Vakuum Technologie, 73728 Esslingen (Germany); Lueders, K. [Freie Universitaet Berlin, Institut fuer Experimentalphysik, 14 Arnimallee, D-14195 Berlin (Germany)

    2007-10-01

    High-T{sub c} ceramics tend to lower its quality by the aging effect. The main cause of the degradation is considered to originate in the link region among the superconducting grains. The preservation and recovery of superconductivity by reinforcement of the grain boundary is an important issue for high-T{sub c} application. A quantitative analysis of the contribution due to the grain and link is necessary and the grained Bean model is proposed, where the superconducting phases are immersed in the matrix link superconductor. Difference of the superconducting characteristics of the grain, the link and grain content factor give a variety of deformation on the AC susceptibility curves. Comparing the observed data with the numerically computed model allows more clear insight between the grain and intergrain structure.

  8. Self-healing in single and multiple fiber(s reinforced polymer composites

    Directory of Open Access Journals (Sweden)

    Woldesenbet E.

    2010-06-01

    Full Text Available You Polymer composites have been attractive medium to introduce the autonomic healing concept into modern day engineering materials. To date, there has been significant research in self-healing polymeric materials including several studies specifically in fiber reinforced polymers. Even though several methods have been suggested in autonomic healing materials, the concept of repair by bleeding of enclosed functional agents has garnered wide attention by the scientific community. A self-healing fiber reinforced polymer composite has been developed. Tensile tests are carried out on specimens that are fabricated by using the following components: hollow and solid glass fibers, healing agent, catalysts, multi-walled carbon nanotubes, and a polymer resin matrix. The test results have demonstrated that single fiber polymer composites and multiple fiber reinforced polymer matrix composites with healing agents and catalysts have provided 90.7% and 76.55% restoration of the original tensile strength, respectively. Incorporation of functionalized multi-walled carbon nanotubes in the healing medium of the single fiber polymer composite has provided additional efficiency. Healing is found to be localized, allowing multiple healing in the presence of several cracks.

  9. Self-healing in single and multiple fiber(s) reinforced polymer composites

    Science.gov (United States)

    Woldesenbet, E.

    2010-06-01

    You Polymer composites have been attractive medium to introduce the autonomic healing concept into modern day engineering materials. To date, there has been significant research in self-healing polymeric materials including several studies specifically in fiber reinforced polymers. Even though several methods have been suggested in autonomic healing materials, the concept of repair by bleeding of enclosed functional agents has garnered wide attention by the scientific community. A self-healing fiber reinforced polymer composite has been developed. Tensile tests are carried out on specimens that are fabricated by using the following components: hollow and solid glass fibers, healing agent, catalysts, multi-walled carbon nanotubes, and a polymer resin matrix. The test results have demonstrated that single fiber polymer composites and multiple fiber reinforced polymer matrix composites with healing agents and catalysts have provided 90.7% and 76.55% restoration of the original tensile strength, respectively. Incorporation of functionalized multi-walled carbon nanotubes in the healing medium of the single fiber polymer composite has provided additional efficiency. Healing is found to be localized, allowing multiple healing in the presence of several cracks.

  10. Properties and Microstructure of Polymer Emulsions Modified Fibers Reinforced Cementitious Composites

    Institute of Scientific and Technical Information of China (English)

    WU Ying; SUN Qianyao; KONG Lian; FANG He

    2014-01-01

    The synthesis and characterization of a new class of cementitious composites filled with polymer emulsions were investigated, and their superior mechanical strength and durability properties compared to composites devoid of fillers were reported. Polymer emulsions were utilized to mechanically reinforce the composite and bridge the cement, fly ash, aggregate and fibers. The results reveal that the epoxy emulsion and poly (ethylene-co-vinyl acetate) emulsion markedly enhance the mechanical and durability properties of cemetitious composites. The fibers can be pulled out in the form of slip-hardening and the abrasion phenomenon can be observed clearly on the surface of the fibers. The hydration extent of cement is higher than that of the pristine composites. The polymer modified cementitious composites designed on micromechanics, have flexibility and plasticity which could be applied for a novel form of multifunctional materials with a range of pipeline coatings applications.

  11. Highly flexible, mechanically robust superconducting wire consisting of NbN-carbon-nanotube nanofibril composites

    Science.gov (United States)

    Kim, Jeong-Gyun; Kang, Haeyong; Kim, Joonggyu; Lee, Young Hee; Suh, Dongseok

    A flexible superconducting fiber is prepared by twisting carbon nanotube (CNT) sheets coated with sputter-deposited niobium nitride (NbN) layer to form the shape of yarn. Twisted CNT yarn, which has been extensively studied due to its high flexibility as well as excellent mechanical properties, and NbN, which is a superconducting material with high transition temperature (Tc) and critical magnetic field (Hc), are combined together by the deposition of NbN layer on free-standing CNT-sheet substrate followed by the biscrolling process. We tried many experimental conditions to investigate the superconducting properties of NbN-CNT yarn as a function of NbN thickness and number of CNT-sheet layers, and found out that the superconducting property of NbN on CNT-sheet can be comparable to that of NbN thin film on the normal solid substrate. In addition, the superconducting property survived even under the condition of severe mechanical deformation such as knotting. These results show the potential application of this technology as a large-scale fabrication method of flexible, mechanically robust, high performance superconducting wire. This work is supported by the Institute for Basic Science (IBS-R011-D1), and by the National Research Foundation (BSR-2013R1A1A1076063) funded by the Ministry of Science, ICT & Future Planning, Republic of Korea.

  12. Dielectric Properties of Lead Monoxide Filled Unsaturated Polyester Based Polymer Composites

    Science.gov (United States)

    Harish, V.; Kumar, H. G. Harish; Nagaiah, N.

    2011-07-01

    Lead monoxide filled isophthalate resin particulate polymer composites were prepared with different filler concentrations and investigated for physical, thermal, mechanical and gamma radiation shielding characteristics. This paper discusses about the dielectric properties of the composites. The present study showed that the dielectric constant (ɛ'), dielectric loss (ɛ″) and ac conductivity (σac) of isopthalate based unsaturated polyester resin increases with the increase in wt% PbO filler in polymer matrix.

  13. Microscale elastic properties of interphases in polymer matrix composites: correlating spatial mapping with cure history

    OpenAIRE

    Kieffer, John,; Aldridge, Michael; Sebeck, Katherine

    2014-01-01

    Polymer matrix composites with textile reinforcement are used in a wide range of aerospace and industrial applications. Continuum mechanical predictions of the composite behaviors have been inaccurate and resorted to empirical corrections, because of the lack of polymer materials property information. The length scales involved make experimental measurement of the elastic properties of the matrix within fiber tows and proximity to individual fibers difficult. However, micro-Brillouin and Rama...

  14. Cure Cycle Effect on High-Temperature Polymer Composite Structures Molded by VARTM

    OpenAIRE

    Ahmed Khattab

    2013-01-01

    This paper presents an analytical and experimental investigation of cure cycle effect on carbon-fiber reinforced high-temperature polymer composite structures molded by vacuum assisted resin transfer molding (VARTM). The molded composite structure consists of AS4-8 harness carbon-fiber fabrics and a high-temperature polymer (Cycom 5250-4-RTM). Thermal and resin cure analysis is performed to model the cure cycle of the VARTM process. The temperature and cure variations with time are determined...

  15. Characterization of Piezoelectric Ceramic-Polymer Composites for Ultrasonic Sensor Applications

    Science.gov (United States)

    Jung, Kyung Keun; Park, Sang Hyoun; Yoo, Kwang Soo; Ko, Hyun Phill; Yoon, Seok Jin

    The piezoelectric ceramic-polymer composites were prepared by Pb(Zr0.52Ti0.48)O3 (PZT)-based ceramics with high piezoelectricity and electromechanical coupling factor and the polyvinylidene fluoride (PVdF) polymer with high acoustic impedance. The composites with 0-3 connectivity type were fabricated by hot pressing and tape casting methods. Their crystallinity, microstructure, dielectric, and piezoelectric properties were systematically evaluated.

  16. Suppression of apoptosis by enhanced protein adsorption on polymer/hydroxyapatite composite scaffolds

    OpenAIRE

    2007-01-01

    Bone tissue engineering is a promising alternative to bone grafting. Scaffolds play a critical role in tissue engineering. Composite scaffolds made of biodegradable polymers and bone mineral-like inorganic compounds have been reported to be advantageous over plain polymer scaffolds by our group and others. In this study, we compared cellular and molecular events during the early periods of osteoblastic cell culture on poly(l-lactic acid)/hydroxyapatite (PLLA/HAP) composite scaffolds with thos...

  17. Phase behavior of confined polymer blends and nanoparticle composites

    Science.gov (United States)

    Chung, Hyun-Joong

    We have investigated phase behavior in polymer blend films of poly(methyl methacrylate) (PMMA) and poly(styrene-ran-acrylonitrile) (SAN) with 33wt% AN content and their nanoparticle (NP) composites by using the combination of imaging techniques, including atomic force microscopy (AFM), focused-ion beam (FIB), transmission and scanning electron microscopy (TEM and SEM), as well as depth profiling techniques of Rutherford backscattering spectrometry (RBS) and elastic recoil detection (ERD). For neat PMMA:SAN films, we present a novel morphology map based on pattern development mechanisms. Six distinct mechanisms are found for thickness values (d) and bulk compositions between 50-1000 nm and φPMMA = 0.3 to 0.8, respectively. When PMMA is depleted from the mid-layer by preferential wetting at φ PMMA = 0.3 (A), stable PMMA/SAN/PMMA trilayer structure is obtained. With increasing φPMMA (0.4 to 0.7), pattern development is driven by phase separation in the mid-layer, which produces circular domains (B), irregular domains (C), and bicontinuous patterns (D). Here, the growth of circular domains can be explained by the coalescence mechanism, which predicts ξ˜(sigma/eta) 1/3d2/3t1/3 , where ξ, sigma, and eta are correlation length between domains, interfacial tension between phases, and viscosity, respectively. In bicontinuous patterns, hydrodynamic pumping mechanism is suppressed with thickness confinement. When SAN composition is lean, φPMMA = 0.8 (E), the SAN phase is minority component in the mid-layer and breaks up into droplets in smooth PMMA film. When film thickness is less than 80 nm at φPMMA = 0.4 or 0.5 (F), films initially display trilayer structure, which then ruptures upon dewetting of the SAN mid-layer. Building upon the understanding of the neat PMMA:SAN blend films, we have performed the first systematic on the effect of NPs in morphology evolution and stability of polymer blend films. Whereas the location of NP impacts morphology evolution, silica

  18. The effect of molecular mobility on electronic transport in carbon nanotube-polymer composites and networks

    Energy Technology Data Exchange (ETDEWEB)

    Shenogin, Sergei, E-mail: sergei.shenogin.ctr.ru@us.af.mil [Air Force Research Laboratory, Materials and Manufacturing Directorate, 2941 Hobson Way, Wright-Patterson Air Force Base, Ohio 45433 (United States); University of Dayton Research Institute, 300 College Park, Dayton, Ohio 45469 (United States); Lee, Jonghoon [Air Force Research Laboratory, Materials and Manufacturing Directorate, 2941 Hobson Way, Wright-Patterson Air Force Base, Ohio 45433 (United States); UTC, Inc., 1270 N Fairfield Rd, Dayton, Ohio 45432 (United States); Voevodin, Andrey A.; Roy, Ajit K. [Air Force Research Laboratory, Materials and Manufacturing Directorate, 2941 Hobson Way, Wright-Patterson Air Force Base, Ohio 45433 (United States)

    2014-12-21

    A multiscale modeling approach to the prediction of electrical conductivity in carbon nanotube (CNT)–polymer composite materials is developed, which takes into account thermally activated molecular mobility of the matrix and the CNTs. On molecular level, a tight-binding density functional theory and non-equilibrium Green's function method are used to calculate the static electron transmission function in the contact between two metallic carbon nanotubes that corresponds to electron transport at 0 K. For higher temperatures, the statistical distribution of effective contact resistances is considered that originates from thermal fluctuations of intermolecular distances caused by molecular mobility of carbon nanotube and the polymer matrix. Based on this distribution and using effective medium theory, the temperature dependence of macroscopic electrical resistivity for CNT-polymer composites and CNT mats is calculated. The predicted data indicate that the electrical conductivity of the CNT-polymer composites increases linearly with temperature above 50 K, which is in a quantitative agreement with the experiments. Our model predicts a slight nonlinearity in temperature dependence of electric conductivity at low temperatures for percolated composites with small CNT loading. The model also explains the effect of glass transition and other molecular relaxation processes in the polymer matrix on the composite electrical conductivity. The developed multiscale approach integrates the atomistic charge transport mechanisms in percolated CNT-polymer composites with the macroscopic response and thus enables direct comparison of the prediction with the measurements of macroscopic material properties.

  19. Plasmon assisted synthesis of highly fluorescing silver quantum cluster/polymer composites for biochemical sensing

    DEFF Research Database (Denmark)

    Bernard, S.; Kutter, J. P.; Mogensen, K. B.

    2014-01-01

    Plasmonics is combined with polymer synthesis for rapid fabrication of highly fluorescing silver quantum cluster/polymer composites inside microfluidic channels. UV-light assisted synthesis of polymers has been investigated by a number of groups previously [1], however, plasmon assisted synthesis...... has not been presented before. This should allow highly localized fabrication of porous polymers that are defined by the location of the nanoplasmonic metal film. Silver quantum clusters (AgQCs) consisting of 2-10 atoms can be highly fluorescing in the visible wavelength range and possess a greater...

  20. Thinking Outside the 'Block': Alternative Polymer Compositions for Micellar Drug Delivery.

    Science.gov (United States)

    Jones, Marie-Christine

    2015-01-01

    With a number of formulations currently in clinical trials, the interest in polymer micelles as drug carriers in unlikely to subside. Historically, linear diblock copolymers have been used as the building blocks for micelle preparation. Yet, recent advances in polymer chemistry have meant that a wider variety of polymer architectures and compositions have become available and been trialed for pharmaceutical applications. This mini-review aims to provide an overview of recent, exciting developments in triblock, graft and hyperbranched polymer chemistries that may change the way polymeric micelles drug formulations are prepared.

  1. Morphology tailoring of nano/micro-structured conductive polymers, composites and their applications in chemical sensors.

    Science.gov (United States)

    Ma, Xingfa; Gao, Mingjun; He, Xiaochun; Li, Guang

    2010-11-01

    Conductive polymer is one of the important multi-functional materials. It has many applications in light-emitting diodes, chemical sensors, biosensors, et al. This paper provides a relatively comprehensive review on the progress of conductive polymer and composite as sensitive film for sensors to chemical vapors including patents, papers and our preliminary research results. Especially, the feature of conjugated polymers, the processing technology, doping characteristics and some factors affecting gas responses are discussed. Otherwise, the developments of nanostructured conductive polymer and organic-inorganic hybrid film sensor with high sensitivity and rapid response to vapors are also described, and some suggestions are proposed.

  2. Plasmon assisted synthesis of highly fluorescing silver quantum cluster / polymer composites for biochemical sensing

    DEFF Research Database (Denmark)

    Bernard, S.; Kutter, J.P.; Mogensen, Klaus Bo

    2014-01-01

    has not been presented before. This should allow highly localized fabrication of porous polymers that are defined by the location of the nanoplasmonic metal film. Silver quantum clusters (AgQCs) consisting of 2-10 atoms can be highly fluorescing in the visible wavelength range and possess a much......Plasmonics is combined with polymer synthesis for rapid fabrication of highly fluorescing silver quantum cluster / polymer composites inside microfluidic channels. UV-light assisted synthesis of polymers has been investigated by a number of groups previously [1], however, plasmon assisted synthesis...

  3. EDITORIAL: Modelling and simulation in polymer and composites processing

    Science.gov (United States)

    Castro, Josè M.

    2004-05-01

    The general theme of this special section is modelling and simulation in polymer and composite processing. Composite processing in general involves reactive processing. During the last decade there have been numerous advances in modelling and simulation in both thermoplastic and reactive processing. This fact, coupled with the enormous advances in computing capability, has made Computer Aided Engineering (CAE) a reality. Industry nowadays depends on CAE to improve and/or develop new processes. There is no excuse not to take advantage of modelling and simulation. Another tendency is a clear move towards environmentally benign manufacturing; thus several papers in this issue discuss environmentally benign alternatives to traditional manufacturing for both composite and thermoplastics. The first two papers are a review of modelling and simulation; the first paper by Castro, Cabrera Rios and Mount-Campbell focuses on reactive processing, while the second by Kim and Turng discusses thermoplastics moulding. Another important issue is the need to use empirical modelling for cases where physics-based models are not available or are too cumbersome to use. For that reason the paper by Castro et al focuses on empirical modelling and the paper by Kim and Turng discusses exclusively physics-based modelling. The next three papers, two by Advani and collaborators and the third by Srinivasagupta and Kardos, refer to composite manufacturing. Advani's papers cover recent advances in Reactive Liquid Moulding, a process that has gained great acceptance as an environmentally benign alternative to open moulding. The paper by Srinivasagupta and Kardos covers the important issue of addressing simultaneously both environmental and economical design. In general the environmental optimum does not coincide with the economic optimum; this gives rise to the need to compromise. The Data Envelopment Analysis (DEA) technique, discussed in the first paper, can be used to identify the best set of

  4. Studies on conducting polymer and conducting polymerinorganic composite electrodes prepared via a new cathodic polymerization method

    Science.gov (United States)

    Singh, Nikhilendra

    A novel approach for the electrodeposition of conducting polymers and conducting polymer-inorganic composite materials is presented. The approach shows that conducting polymers, such as polypyrrole (PPy) and poly(3,4-ethylenedioxythiophene) (PEDOT) can be electrodeposited by the application of a cathodic bias that generates an oxidizing agent, NO+, via the in-situ reduction of nitrate anions. This new cathodic polymerization method allows for the deposition of PPy and PEDOT as three dimensional, porous films composed of spherical polymer particles. The method is also suitable for the co-deposition of inorganic species producing conducting polymer-inorganic composite electrodes. Such composites are used as high surface area electrodes in Li-ion batteries, electrochemical hydrogen evolution and in the development of various other conducting polymer-inorganic composite electrodes. New Sn-PPy and Sb-PPy composite electrodes where Sn and Sb nanoparticles are well dispersed among the PPy framework are reported. These structures allow for decreased stress during expansion and contraction of the active material (Sn, Sb) during the alloying and de-alloying processes of a Li-ion battery anode, significantly alleviating the loss of active material due to pulverization processes. The new electrochemical synthesis mechanism allows for the fabrication of Sn-PPy and Sb-PPy composite electrodes directly from a conducting substrate and eliminates the use of binding materials and conducting carbon used in modern battery anodes, which significantly simplifies their fabrication procedures. Platinum (Pt) has long been identified as the most efficient catalyst for electrochemical water splitting, while nickel (Ni) is a cheaper, though less efficient alternative to Pt. A new morphology of PPy attained via the aforementioned cathodic deposition method allows for the use of minimal quantities of Pt and Ni dispersed over a very high surface area PPy substrate. These composite electrodes

  5. Synthesis of Nano Conducting Polymer Based Polyaniline and it's Composite: Mechanical Properties, Conductivity and Thermal Studies

    Directory of Open Access Journals (Sweden)

    M. Banimahd Keivani

    2010-01-01

    Full Text Available Polyaniline (PAn was prepared chemically in the presence of bronsted acid from aqueous solutions. Polyaniline- nylon 6 composite (termed as PAn/Ny6 prepared via solvent casting method. The preparation conditions were optimized with regard to the mechanical properties of the polymer composite. It was found that the molar ratio of PAn to nylon have the greatest effect in determining the mechanical properties of polymer composite. Electrical conductivity was measured using standard method of four point probe. Spectrophotometric analysis (UV-Vis was used for investigation of the effect of thermal treatment on polyaniline and it’s composite.

  6. Preparation, Characterization and Application of Mg(OH)2-PAM Inorganic-Organic Composite Polymer in Removing Reactive Dye

    OpenAIRE

    Khai Ern Lee; Norhashimah Morad; Tjoon Tow Teng; Beng Teik Poh

    2012-01-01

    In this study, a series of inorganic-organic composite polymer was prepared. Magnesium hydroxide and polyacrylamide was composed in a composite matrix to prepare Mg(OH)2-PAM (MHPAM) inorganic-organic composite polymer. The characteristics of MHPAM inorganic-organic composite polymer was investigated in terms of chemical, physical, physical, thermal and morphological properties through FT-IR, conductivity, intrinsic viscosity, TGA and TEM, respectively. Results showed that the properties of MH...

  7. Polymer-carbon black composite sensors in an electronic nose for air-quality monitoring

    Science.gov (United States)

    Ryan, M. A.; Shevade, A. V.; Zhou, H.; Homer, M. L.

    2004-01-01

    An electronic nose that uses an array of 32 polymer-carbon black composite sensors has been developed, trained, and tested. By selecting a variety of chemical functionalities in the polymers used to make sensors, it is possible to construct an array capable of identifying and quantifying a broad range of target compounds, such as alcohols and aromatics, and distinguishing isomers and enantiomers (mirror-image isomers). A model of the interaction between target molecules and the polymer-carbon black composite sensors is under development to aid in selecting the array members and to enable identification of compounds with responses not stored in the analysis library.

  8. Comparative analysis of methods for determination of the thermal characteristics of filled polymer composites

    Science.gov (United States)

    Bochkareva, S. A.; Grishaeva, N. Yu.; Lyukshin, P. A.; Lyukshin, B. A.; Panin, S. V.; Reutov, Yu. A.; Matolygina, N. Yu.

    2016-11-01

    The thermal conductivity of a number of dispersely filled polymer materials has been determined on the basis of a heat problem solution. The temperature distribution in a heterogeneous media has been defined with the use of finite element method for the model that takes into account the location, geometry and properties of inclusions and/or pores. The results for the composites based on various polymer matrices have been obtained. For the studied methods for determination of effective characteristics of filled polymer composites, it was shown that the values of effective thermal conductivity both qualitatively and quantitatively agree with experimental data.

  9. A new composite polymer electrolyte based on poly(ethyleneoxide)/polysiloxane/BMImTFSI/organomontmorillonite

    Institute of Scientific and Technical Information of China (English)

    Yue-Jiao Li; Feng Wu; Hu-Ren Chao; Shi Chen

    2013-01-01

    Composite polymer electrolytes based on poly(ethylene oxide)-polysiloxane/1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide/organomontmorillonite (PEO-PDMS/IL/OMMT) were prepared and characterized.Addition of both an ionic liquid and OMMT to the polymer base of PEO-PDMS resulted in an increase in ionic conductivity.At room temperature,the ionic conductivity of sample PPB1OO-OMMT4 was 2.19 × 10-3 S/cm.The composite polymer electrolyte also exhibited high thermal and electrochemical stability and may potentially be applied in lithium batteries.

  10. Molecular dynamics simulation of diffusion of gases in a carbon-nanotube-polymer composite

    Science.gov (United States)

    Lim, Seong Y.; Sahimi, Muhammad; Tsotsis, Theodore T.; Kim, Nayong

    2007-07-01

    Extensive molecular dynamics (MD) simulations were carried out to compute the solubilities and self-diffusivities of CO2 and CH4 in amorphous polyetherimide (PEI) and mixed-matrix PEI generated by inserting single-walled carbon nanotubes into the polymer. Atomistic models of PEI and its composites were generated using energy minimizations, MD simulations, and the polymer-consistent force field. Two types of polymer composite were generated by inserting (7,0) and (12,0) zigzag carbon nanotubes into the PEI structure. The morphologies of PEI and its composites were characterized by their densities, radial distribution functions, and the accessible free volumes, which were computed with probe molecules of different sizes. The distributions of the cavity volumes were computed using the Voronoi tessellation method. The computed self-diffusivities of the gases in the polymer composites are much larger than those in pure PEI. We find, however, that the increase is not due to diffusion of the gases through the nanotubes which have smooth energy surfaces and, therefore, provide fast transport paths. Instead, the MD simulations indicate a squeezing effect of the nanotubes on the polymer matrix that changes the composite polymers’ free-volume distributions and makes them more sharply peaked. The presence of nanotubes also creates several cavities with large volumes that give rise to larger diffusivities in the polymer composites. This effect is due to the repulsive interactions between the polymer and the nanotubes. The solubilities of the gases in the polymer composites are also larger than those in pure PEI, hence indicating larger gas permeabilities for mixed-matrix PEI than PEI itself.

  11. Polymer matrix composites research: A survey of federally sponsored programs

    Energy Technology Data Exchange (ETDEWEB)

    1990-06-01

    This report identifies research conducted by agencies of the federal government other than the Department of Energy (DOE) in the area of advanced polymer matrix composites (PMCs). DOE commissioned the report to avoid duplicating other agencies' efforts in planning its own research program for PMCs. PMC materials consist of high-strength, short or continuous fibers fused together by an organic matrix. Compared to traditional structural metals, PMCs provide greater strength and stiffness, reduced weight and increased heat resistance. The key contributors to PMC research identified by the survey are the Department of Defense (DOD), the National Aeronautics and Space Administration (NASA), the National Science Foundation (NSF), and the Department of Transportation (DOT). The survey identified a total of 778 projects. More than half of the total projects identified emphasize materials research with a goal toward developing materials with improved performance. Although an almost equal number of identified materials projects focus on thermosets and thermoplastics receive more attention because of their increased impact resistance and their easy formability and re-formability. Slightly more than one third of projects identified target structures research. Only 15 percent of the projects identified focus on manufacturing techniques, despite the need for efficient, economical methods manufacturing products constructed of PMCs--techniques required for PMCs to gain widespread acceptance. Three issues to be addressed concerning PMCs research are economy of use, improvements in processing, and education and training. Five target technologies have been identified that could benefit greatly from increased use of PMCs: aircraft fuselages, automobile frames, high-speed machinery, electronic packaging, and construction.

  12. Modelling compression sensing in ionic polymer metal composites

    Science.gov (United States)

    Volpini, Valentina; Bardella, Lorenzo; Rodella, Andrea; Cha, Youngsu; Porfiri, Maurizio

    2017-03-01

    Ionic polymer metal composites (IPMCs) consist of an ionomeric membrane, including mobile counterions, sandwiched between two thin noble metal electrodes. IPMCs find application as sensors and actuators, where an imposed mechanical loading generates a voltage across the electrodes, and, vice versa, an imposed electric field causes deformation. Here, we present a predictive modelling approach to elucidate the dynamic sensing response of IPMCs subject to a time-varying through-the-thickness compression (‘compression sensing’). The model relies on the continuum theory recently developed by Porfiri and co-workers, which couples finite deformations to the modified Poisson–Nernst–Planck (PNP) system governing the IPMC electrochemistry. For the ‘compression sensing’ problem we establish a perturbative closed-form solution along with a finite element (FE) solution. The systematic comparison between these two solutions is a central contribution of this study, offering insight on accuracy and mathematical complexity. The method of matched asymptotic expansions is employed to find the analytical solution. To this end, we uncouple the force balance from the modified PNP system and separately linearise the PNP equations in the ionomer bulk and in the boundary layers at the ionomer–electrode interfaces. Comparison with FE results for the fully coupled nonlinear system demonstrates the accuracy of the analytical solution to describe IPMC sensing for moderate deformation levels. We finally demonstrate the potential of the modelling scheme to accurately reproduce experimental results from the literature. The proposed model is expected to aid in the design of IPMC sensors, contribute to an improved understanding of IPMC electrochemomechanical response, and offer insight into the role of nonlinear phenomena across mechanics and electrochemistry.

  13. Processing and characterization of natural cellulose fibers/thermoset polymer composites.

    Science.gov (United States)

    Thakur, Vijay Kumar; Thakur, Manju Kumari

    2014-08-30

    Recently natural cellulose fibers from different biorenewable resources have attracted the considerable attraction of research community all around the globe owing to their unique intrinsic properties such as biodegradability, easy availability, environmental friendliness, flexibility, easy processing and impressive physico-mechanical properties. Natural cellulose fibers based materials are finding their applications in a number of fields ranging from automotive to biomedical. Natural cellulose fibers have been frequently used as the reinforcement component in polymers to add the specific properties in the final product. A variety of cellulose fibers based polymer composite materials have been developed using various synthetic strategies. Seeing the immense advantages of cellulose fibers, in this article we discuss the processing of biorenewable natural cellulose fibers; chemical functionalization of cellulose fibers; synthesis of polymer resins; different strategies to prepare cellulose based green polymer composites, and diverse applications of natural cellulose fibers/polymer composite materials. The article provides an in depth analysis and comprehensive knowledge to the beginners in the field of natural cellulose fibers/polymer composites. The prime aim of this review article is to demonstrate the recent development and emerging applications of natural cellulose fibers and their polymer materials.

  14. Electrical permittivity of Ni and NiZn ferrite-polymer composites

    Energy Technology Data Exchange (ETDEWEB)

    Razzitte, A.C. [Laboratorio de Fisicoquimica de Materiales Ceramicos Electronicos (LAFMACEL), Departamento de Quimica, Universidad de Buenos Aires, Paseo Colon 850, Capital Fedcral 1063, Buenos Aires (Argentina)]. E-mail: arazzit@fi.uba.ar; Fano, W.G. [Departamento de Electronica, Facultad.de Ingenieria, Universidad de Buenos Aires, Paseo Colon 850, Capital Fedcral 1063, Buenos Aires (Argentina); Jacobo, S.E. [Laboratorio de Fisicoquimica de Materiales Ceramicos Electronicos (LAFMACEL), Departamento de Quimica, Universidad de Buenos Aires, Paseo Colon 850, Capital Fedcral 1063, Buenos Aires (Argentina)

    2004-12-31

    Electrical properties of polymers, well known for their insulating properties, may be improved by adding various functional fillers. Polymer-ferrite composites have been a subject of recent extensive research. Electric properties of such composites depend on the size, shape and amount of added filler in general. When polymer-ferrite composites are particularly used as electromagnetic wave absorbers and EMI shielding materials, it is very important to explain the variation of permeability and permittivity in the measured frequency ranges. In this paper, acrylic-Ni ferrite composites and acrylic-NiZn ferrite composites were used. The effects of the weight fraction of ferrite on the frequency dispersion characteristics of the complex permittivity are studied.

  15. Effect of fabric structure and polymer matrix on flexural strength, interlaminar shear stress, and energy dissipation of glass fiber-reinforced polymer composites

    Science.gov (United States)

    We report the effect of glass fiber structure and the epoxy polymer system on the flexural strength, interlaminar shear stress (ILSS), and energy absorption properties of glass fiber-reinforced polymer (GFRP) composites. Four different GFRP composites were fabricated from two glass fiber textiles of...

  16. Polymer/Ceramic Composite Membranes and Their Application in Pervaporation Process

    Institute of Scientific and Technical Information of China (English)

    刘公平; 卫旺; 金万勤; 徐南平

    2012-01-01

    Pervaporation (PV), as an environmental friendly and energy-saving separation technology, has been received increasing attention in recent years. This article reviews the preparation and application of macroporous ceramic-supported polymer composite pervaporation membranes. The separation materials of polymer/ceramic composite membranes presented here include hydrophobic polydimethylsiloxane (PDMS) and hydrophilic poly(vinyl alcohol) (PVA), chitosan (CS) and polyelectrolytes. The effects of ceramic support treatment, polymer solution properties, interfacial adhesion and incorporating or blending modification on the membrane structure and PV performance are discussed. Two in-situ characterization methods developed for polymer/ceramic composite membranes are also covered in the discussio.n. The.applications of these composite_membranesi_n_ pervaporation process are summarized as well, which contain the bio-fuels recovery, gasoline desulfuration and PV coupled process using PDMS/ceramic composite membrane, and dehydration of alcohols and esters using ceramic-supported PVA or PVA-CS composite membrane. Finally, a brief conclusion remark on polymer/ceramic composite mem- branes is given and possible future research is outlined.

  17. Preparation of Sheet-like Polymer-Encapsulated Composite Particles by Seeded Polymerization from Sub-micrometer Sheets.

    Science.gov (United States)

    Huang, Ting; Yao, Kuncheng; Wu, Teng; Qiu, Dong

    2015-07-01

    Seeded polymerization has been widely used to fabricate polymer-encapsulated inorganic particles (IPs). The most frequently used seeds are spherical, whereas nonspherical particles are not well documented. Recently, sheet-like IPs have attracted much attention in the context of polymer composites. This article is therefore dedicated to understanding seeded polymerization from submicron sheets and focuses on the control of the overall morphology of the composite particles obtained. However, it was found that the composite particles only maintained the sheet-like morphology of the seeds at a low polymer content, whereas they became hamburger-like at a high polymer content owing to minimization of the interfacial energy. Interestingly, when cross-linked, the sheet-like morphology could be well preserved, even at a rather high polymer content. With the encapsulating polymer layer, the obtained sheet-like composite particles showed improved compatibility with the polymer matrix and could be well dispersed in polymer matrix when simply blended.

  18. The Cost of Automotive Polymer Composites: A Review and Assessment of DOE's Lightweight Materials Composites Research

    Energy Technology Data Exchange (ETDEWEB)

    Das, S.

    2001-01-26

    Polymer composite materials have been a part of the automotive industry for several decades, with early application in the 1953 Corvette. These materials have been used for applications with low production volumes, because of their shortened lead times and lower investment costs relative to conventional steel fabrication. Important drivers of the growth of polymer composites have been the reduced weight and parts consolidation opportunities the material offers, as well as design flexibility, corrosion resistance, material anisotropy, and mechanical properties. Although these benefits are well recognized by the industry, polymer composite use has been dampened by high material costs, slow production rates, and to a lesser extent, concerns about recyclability. Also impeding large scale automotive applications is a curious mixture of concerns about material issues such as crash energy absorption, recycling challenges, competitive and cost pressures, the industry's general lack of experience and comfort with the material, and industry concerns about its own capabilities (Flynn and Belzowski 1995). Polymer composite materials are generally made of two or more material components--fibers, either glass or carbon, reinforced in the matrix of thermoset or thermoplastic polymer materials. The glass-reinforced thermoset composites are the most commonly used composite in automotive applications today, but thermoplastic composites and carbon fiber-reinforced thermosets also hold potential. It has been estimated that significant use of glass-reinforced polymers as structural components could yield a 20-35% reduction in vehicle weight. More importantly, the use of carbon fiber-reinforced materials could yield a 40-65% reduction in weight.

  19. The role of curing stresses in subsequent response, damage and failure of textile polymer composites

    Science.gov (United States)

    Heinrich, Christian; Aldridge, Michael; Wineman, Alan S.; Kieffer, John; Waas, Anthony M.; Shahwan, Khaled W.

    2013-05-01

    An integrated computational framework for textile polymer composites is introduced. A novel polymer curing model is used in connection with modeling the polymer curing process during manufacturing of textile composites. The model is based on the notion of polymer networks that are continuously formed in a body of changing shape due to changes in temperature, chemistry and external loads. Nonlinear material behavior is incorporated through nonlocal continuum damage mechanics that preserves mesh objectivity in calculations that go beyond maximum loads. The integrated model is applied to the curing of plain weave textile composites made from carbon fiber tows and Epon™862 resin. The mechanical and chemical properties are measured during curing using concurrent Brillouin and Raman light scattering. It is shown that significant stresses can develop during cure. The effect of these stresses on the manufactured part performance, when subsequent service loads are applied, is evaluated and a reduction in ultimate load, in agreement with experimental observations, is observed.

  20. Temperature dependent damping studies of Ni–Mn–Ga polymer composites

    Indian Academy of Sciences (India)

    R Senthur Pandi; M Mahendran; R Chokkalingam; M Manivelraja; V Chandrashekaran

    2011-07-01

    Mechanical properties of ferromagnetic shape memory alloy (FSMA) polyurethane (PU) polymer composites are studied using dynamic mechanical analysis (DMA) at different temperatures. The sample used in the study is Ni–Mn–Ga/PU polymer composite. DMA studies reveal that the mechanical modulus decreases, when the temperature increases. The peak in internal friction (tan) appears twice due to martensite transformation of the reinforced particles and glass transition of the polymer matrix. The strain is due to the motion of twin boundaries rather than the phase transformations. Twin boundary motion is found to be the root cause for the martensite-austenite transformation and vice versa, and leads to enhanced damping mechanism. Speculations on twin boundaries of this sample to show concrete evidence on change in internal friction (tan) are still underway. This paper proposes that Ni–Mn–Ga/PU polymer composites can be used as efficient dampers.

  1. LS-DYNA Implementation of Polymer Matrix Composite Model Under High Strain Rate Impact

    Science.gov (United States)

    Zheng, Xia-Hua; Goldberg, Robert K.; Binienda, Wieslaw K.; Roberts, Gary D.

    2003-01-01

    A recently developed constitutive model is implemented into LS-DYNA as a user defined material model (UMAT) to characterize the nonlinear strain rate dependent behavior of polymers. By utilizing this model within a micromechanics technique based on a laminate analogy, an algorithm to analyze the strain rate dependent, nonlinear deformation of a fiber reinforced polymer matrix composite is then developed as a UMAT to simulate the response of these composites under high strain rate impact. The models are designed for shell elements in order to ensure computational efficiency. Experimental and numerical stress-strain curves are compared for two representative polymers and a representative polymer matrix composite, with the analytical model predicting the experimental response reasonably well.

  2. 3D optical printing of piezoelectric nanoparticle-polymer composite materials.

    Science.gov (United States)

    Kim, Kanguk; Zhu, Wei; Qu, Xin; Aaronson, Chase; McCall, William R; Chen, Shaochen; Sirbuly, Donald J

    2014-10-28

    Here we demonstrate that efficient piezoelectric nanoparticle-polymer composite materials can be optically printed into three-dimensional (3D) microstructures using digital projection printing. Piezoelectric polymers were fabricated by incorporating barium titanate (BaTiO3, BTO) nanoparticles into photoliable polymer solutions such as polyethylene glycol diacrylate and exposing to digital optical masks that could be dynamically altered to generate user-defined 3D microstructures. To enhance the mechanical-to-electrical conversion efficiency of the composites, the BTO nanoparticles were chemically modified with acrylate surface groups, which formed direct covalent linkages with the polymer matrix under light exposure. The composites with a 10% mass loading of the chemically modified BTO nanoparticles showed piezoelectric coefficients (d(33)) of ∼ 40 pC/N, which were over 10 times larger than composites synthesized with unmodified BTO nanoparticles and over 2 times larger than composites containing unmodified BTO nanoparticles and carbon nanotubes to boost mechanical stress transfer efficiencies. These results not only provide a tool for fabricating 3D piezoelectric polymers but lay the groundwork for creating highly efficient piezoelectric polymer materials via nanointerfacial tuning.

  3. Characterizing the interphase dielectric constant of polymer composite materials: Effect of chemical coupling agents

    Science.gov (United States)

    Todd, Michael G.; Shi, Frank G.

    2003-10-01

    Recent research into the dielectric characteristics of polymer-ceramic composites has shown that the interphase region of the composite can have a dielectric constant significantly different from that of the polymer phase due to covalent bonding of the polymer molecules to the surface of the filler particles. Chemical coupling agents and surfactants such as functional silanes, organotitanates, organometallic chelating agents, phosphate esters, and various ionic and nonionic organic esters are commonly employed to enhance the compatibility between the polymer phase and dispersed filler phase of composite systems. Using experimental data and molecular dipole polarization calculations, we determine the effect of such coupling agents on the interphase dielectric constant. Our results show that the addition of functional silane coupling agents or nonionic surfactants at concentrations of 0.5 wt % or less of the total organics of a polymer-ceramic composite system has significant effects on the dielectric constant of the interphase region, yet has little or no effect on the dielectric constant values of the polymer phase. Furthermore, the chemical bonding of the coupling agents to the ceramic filler particles determine the dielectric constant of the interphase region as predicted by chemical polarization calculations. These results are fully consistent with experimental evidence and further validate the use of molecular polarization calculations of composite interphase regions to determine and predict the overall effective dielectric properties of packaging materials for a wide range of electrical, electronic, and rf applications.

  4. The Usage Of Nutshell In The Production of Polypropylene Based on Polymer Composite Panels

    Directory of Open Access Journals (Sweden)

    Selçuk Akbaş

    2013-04-01

    Full Text Available Natural fibers have been commonly utilized to reinforced materials for many years. Recently due to advantages of natural fibers such as low cost, high physical and mechanical resistance are produced plastic-composite materials by mixing various proportions. In addition, plastic composites are used natural fibers include agricultural wastes (wheat straw, rice straw, hemp fiber, shells of various dry fruits, etc.. In this study, polymer composites were manufactured using waste nutshell flour as filler and polypropylene (PP as polymer matrix. The nutshell-PP composites were manufactured via extrusion and compression methods. The final product tested to determine their tensile, flexural, impact strength properties as well as some physical features such as thickness swelling and water absorptions. The best results were obtained composites containing 30% nutshell flour. In addition, composites which were produced nutshell provided the values of ASTM D6662 standard. The data collected in our country which waste a large portion of nutshell allows for the evaluation of the production polymer composites. The incorporation of nutshell flour feasible to produce plastic composites when appropriate formulations were used. As a result hazelnut shell which was considered agricultural waste can be utilized in polymer composite production.

  5. The Effect of Nano-Morphology Modification Using an Amphiphilic Polymer on the Proton Conductivity of Composite Membrane for a Polymer Membrane-Based Fuel Cell.

    Science.gov (United States)

    Roh, Sung-Hee; Rho, Seon-Gyun; Kim, Sang-Chai; Kim, Ju-Young; Jung, Ho-Young

    2016-02-01

    The effect of morphology modification using an amphiphilic polymer on the proton conductivity of composite membrane for a polymer membrane-based fuel cell was investigated. The proton conductivity of each composite membrane was analyzed by the electrochemical impedance spectroscopy (EIS). The morphological change was confirmed by scanning electron microscope (SEM). In the composite membrane, the proton conductive component was sulfonated poly(ether ether ketone) (sPEEK), while the nonconductive component was poly(vinylidenedifluoride) and the amphiphilic polymer as a compatibilizer was urethane acrylate non-ionomer (UAN). UAN as a compatibilizer improved the interfacial stability between sPEEK and PVdF polymers, even though two polymers were apparently immiscible. The homogeneous distribution of sPEEK and PVdF domains in the composite membrane was obtained with the introduction of UAN due to the amphiphilicity. Therefore, it was found that the proton conductivity of the composite membrane increased with the incorporation of UAN as a compatibilizer.

  6. Centre seeded infiltration and growth process for fabrication of large grain bulk YBCO/Ag superconducting composites

    Science.gov (United States)

    Parthasarathy, R.; Seshubai, V.

    2012-06-01

    We report the fabrication of a large grain bulk YBCO/Ag superconductor using a novel technique which we call Centre Seeded Infiltration and Growth Process (CSIGP). Using this technique, it has been made possible to get bulk YBCO/Ag composite sample with uniform grain growth textured along the c-axis. The resulting large grain sample has been found to have high critical current densities up to large magnetic fields. We correlate the improved superconducting and magnetic properties to the modified grain growth conditions employed in this fabrication technique.

  7. Hybrid and hierarchical nanoreinforced polymer composites: Computational modelling of structure–properties relationships

    DEFF Research Database (Denmark)

    Mishnaevsky, Leon; Dai, Gaoming

    2014-01-01

    Hybrid and hierarchical polymer composites represent a promising group of materials for engineering applications. In this paper, computational studies of the strength and damage resistance of hybrid and hierarchical composites are reviewed. The reserves of the composite improvement are explored...... by using computational micromechanical models. It is shown that while glass/carbon fibers hybrid composites clearly demonstrate higher stiffness and lower weight with increasing the carbon content, they can have lower strength as compared with usual glass fiber polymer composites. Secondary...... nanoreinforcement can drastically increase the fatigue lifetime of composites. Especially, composites with the nanoplatelets localized in the fiber/matrix interface layer (fiber sizing) ensure much higher fatigue lifetime than those with the nanoplatelets in the matrix....

  8. Polymer Matrix Composite Materials for Lightning Strike Mitigation Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this phase I SBIR program, a team led by Advanced Ceramics Research Inc. (ACR) propose a novel, low-cost manufacturing process for multi-functional polymer...

  9. Manufacturing Technology of Composite Materials—Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene

    Directory of Open Access Journals (Sweden)

    Anton Panda

    2017-03-01

    Full Text Available The results of the investigations into the technological formation of new wear-resistant polymer composites based on polytetrafluoroethylene (PTFE filled with disperse synthetic and natural compounds are presented. The efficiency of using PTFE composites reinforced with carbon fibers depends on many factors, which influence the significant improvement of physicomechanical characteristics. The results of this research allow stating that interfacial and surface phenomena of the polymer–solid interface and composition play a decisive role in PTFE composites properties. Fillers hinder the relative movement of the PTFE molecules past one another and, in this way, reduce creep or deformation of the parts, reducing the wear rate of parts used in dynamic applications as well as the coefficient of thermal expansion. The necessary structural parameters of such polymer composites are provided by regimes of process equipment.

  10. Manufacturing Technology of Composite Materials—Principles of Modification of Polymer Composite Materials Technology Based on Polytetrafluoroethylene

    Science.gov (United States)

    Panda, Anton; Dyadyura, Kostiantyn; Valíček, Jan; Harničárová, Marta; Zajac, Jozef; Modrák, Vladimír; Pandová, Iveta; Vrábel, Peter; Nováková-Marcinčínová, Ema; Pavelek, Zdeněk

    2017-01-01

    The results of the investigations into the technological formation of new wear-resistant polymer composites based on polytetrafluoroethylene (PTFE) filled with disperse synthetic and natural compounds are presented. The efficiency of using PTFE composites reinforced with carbon fibers depends on many factors, which influence the significant improvement of physicomechanical characteristics. The results of this research allow stating that interfacial and surface phenomena of the polymer–solid interface and composition play a decisive role in PTFE composites properties. Fillers hinder the relative movement of the PTFE molecules past one another and, in this way, reduce creep or deformation of the parts, reducing the wear rate of parts used in dynamic applications as well as the coefficient of thermal expansion. The necessary structural parameters of such polymer composites are provided by regimes of process equipment. PMID:28772733

  11. Addition of magnetic markers for non-destructive evaluation of polymer composites

    Directory of Open Access Journals (Sweden)

    Ana Paula Pereira Fulco

    2011-12-01

    Full Text Available Polymer composite pipes are an appealing option as a substitute for conventional steel pipes, particularly due to their inherent corrosion resistance. However, the composite pipes currently used do not allow non-destructive evaluation (NDE using instrumented devices which operate with magnetic sensors. The present work aims at the development of polymer composites with the addition magnetic markers to allow the application non-destructive evaluation techniques which use magnetic sensors. Glass-polyester composite flat, circular plates were fabricated with the addition of ferrite particles (barium ferrite and strontium ferrite and four types of notches were introduced on the plates' surfaces. The influence of these notches on the measured magnetic properties of each material was measured. X-ray diffraction (XRD, X-ray fluorescence (XRF and Brunauer, Emmett, and Teller (BET nitrogen adsorption were used for the characterization of the ferrite particles. Particle dispersion in the polymer matrix was analyzed by scanning electron microscopy (SEM. According to the results, a particular variation in magnetic field was detected over the region surrounding each type of notch. The results suggest that the proposed technique has great potential for damage detection in polymer composites using magnetic sensors and thus constitute a valuable contribution which may ultimately lead to the development of non-destructive evaluation techniques for assessing the structural integrity polymer composite pipes.

  12. Nanoparticle and gelation stabilized functional composites of an ionic salt in a hydrophobic polymer matrix.

    Science.gov (United States)

    Kanyas, Selin; Aydın, Derya; Kizilel, Riza; Demirel, A Levent; Kizilel, Seda

    2014-01-01

    Polymer composites consisted of small hydrophilic pockets homogeneously dispersed in a hydrophobic polymer matrix are important in many applications where controlled release of the functional agent from the hydrophilic phase is needed. As an example, a release of biomolecules or drugs from therapeutic formulations or release of salt in anti-icing application can be mentioned. Here, we report a method for preparation of such a composite material consisted of small KCOOH salt pockets distributed in the styrene-butadiene-styrene (SBS) polymer matrix and demonstrate its effectiveness in anti-icing coatings. The mixtures of the aqueous KCOOH and SBS-cyclohexane solutions were firstly stabilized by adding silica nanoparticles to the emulsions and, even more, by gelation of the aqueous phase by agarose. The emulsions were observed in optical microscope to check its stability in time and characterized by rheological measurements. The dry composite materials were obtained via casting the emulsions onto the glass substrates and evaporations of the organic solvent. Composite polymer films were characterized by water contact angle (WCA) measurements. The release of KCOOH salt into water and the freezing delay experiments of water droplets on dry composite films demonstrated their anti-icing properties. It has been concluded that hydrophobic and thermoplastic SBS polymer allows incorporation of the hydrophilic pockets/phases through our technique that opens the possibility for controlled delivering of anti-icing agents from the composite.

  13. Nanoparticle and gelation stabilized functional composites of an ionic salt in a hydrophobic polymer matrix.

    Directory of Open Access Journals (Sweden)

    Selin Kanyas

    Full Text Available Polymer composites consisted of small hydrophilic pockets homogeneously dispersed in a hydrophobic polymer matrix are important in many applications where controlled release of the functional agent from the hydrophilic phase is needed. As an example, a release of biomolecules or drugs from therapeutic formulations or release of salt in anti-icing application can be mentioned. Here, we report a method for preparation of such a composite material consisted of small KCOOH salt pockets distributed in the styrene-butadiene-styrene (SBS polymer matrix and demonstrate its effectiveness in anti-icing coatings. The mixtures of the aqueous KCOOH and SBS-cyclohexane solutions were firstly stabilized by adding silica nanoparticles to the emulsions and, even more, by gelation of the aqueous phase by agarose. The emulsions were observed in optical microscope to check its stability in time and characterized by rheological measurements. The dry composite materials were obtained via casting the emulsions onto the glass substrates and evaporations of the organic solvent. Composite polymer films were characterized by water contact angle (WCA measurements. The release of KCOOH salt into water and the freezing delay experiments of water droplets on dry composite films demonstrated their anti-icing properties. It has been concluded that hydrophobic and thermoplastic SBS polymer allows incorporation of the hydrophilic pockets/phases through our technique that opens the possibility for controlled delivering of anti-icing agents from the composite.

  14. Metal- and Polymer-Matrix Composites: Functional Lightweight Materials for High-Performance Structures

    Science.gov (United States)

    Gupta, Nikhil; Paramsothy, Muralidharan

    2014-06-01

    The special topic "Metal- and Polymer-Matrix Composites" is intended to capture the state of the art in the research and practice of functional composites. The current set of articles related to metal-matrix composites includes reviews on functionalities such as self-healing, self-lubricating, and self-cleaning capabilities; research results on a variety of aluminum-matrix composites; and investigations on advanced composites manufacturing methods. In addition, the processing and properties of carbon nanotube-reinforced polymer-matrix composites and adhesive bonding of laminated composites are discussed. The literature on functional metal-matrix composites is relatively scarce compared to functional polymer-matrix composites. The demand for lightweight composites in the transportation sector is fueling the rapid development in this field, which is captured in the current set of articles. The possibility of simultaneously tailoring several desired properties is attractive but very challenging, and it requires significant advancements in the science and technology of composite materials. The progress captured in the current set of articles shows promise for developing materials that seem capable of moving this field from laboratory-scale prototypes to actual industrial applications.

  15. Composite hydrogels of bio-inspired protein polymers : mechanical and structural characterization

    NARCIS (Netherlands)

    Rombouts, W.H.

    2015-01-01

    In this thesis we presented various combinations of custom-designed protein polymers that formed composite hydrogels. In chapter 2, composite hydrogels were prepared by mixing silk-like block copolymers (CP2SE48CP2) with collagen-like block copolymers (T9CR4T9). We found that by add

  16. Simulation on Magnetostriction Strain of Polymer-bonded Terfenol-D Composites

    Institute of Scientific and Technical Information of China (English)

    Jiuchun YAN; Shixiong LU; Shiqin YANG; Shiyu HE

    2003-01-01

    A model of magnetostrictive strain for polymer-bonded Terfenol-D composite is presented, which is composed of asubmodel for the average strain of Terfenol-D composite and a magnetostriction submodel for Terfenol-D particles.Simulated results show that the

  17. Polymer composites prepared from heat-treated starch and styrene-butadiene latex

    Science.gov (United States)

    Thermoplastic starch/latex polymer composites were prepared using styrene–butadiene (SB) latex and heat-treated cornstarch. The composites were prepared in a compression mold at 130 °C, with starch content 20%. An amylose-free cornstarch, waxy maize, was used for this research and the heat treatment...

  18. Impact of biofibers and coupling agents on the weathering characteristics of composites polymer degradation and stability

    Science.gov (United States)

    This paper explores the ultraviolet (UV) weathering performance of high density polyethylene (HDPE) composites with different biofiber fillers and coupling agent. Biofiber polymer composite (BFPC) material samples were prepared using oak, cotton burr and stem (CBS) or guayule bagasse as fiber source...

  19. Composite hydrogels of bio-inspired protein polymers : mechanical and structural characterization

    NARCIS (Netherlands)

    Rombouts, W.H.

    2015-01-01

    In this thesis we presented various combinations of custom-designed protein polymers that formed composite hydrogels. In chapter 2, composite hydrogels were prepared by mixing silk-like block copolymers (CP2SE48CP2) with collagen-like block copolymers (T9CR4T9). We found that by

  20. Polymer composite adsorbents using particles of molecularly imprinted polymers or aluminium oxide nanoparticles for treatment of arsenic contaminated waters.

    Science.gov (United States)

    Önnby, L; Pakade, V; Mattiasson, B; Kirsebom, H

    2012-09-01

    Removal of As(V) by adsorption from water solutions was studied using three different synthetic adsorbents. The adsorbents, (a) aluminium nanoparticles (Alu-NPs, polymers (polymer backbones of pure polyacrylamide (MIP-cryo) were of better stability than the amine containing polymer backbone (Alu-cryo). Both composites worked well in the studied pH range of pH 2-8. Adsorption tested in real wastewater spiked with arsenic showed that co-ions (nitrate, sulphate and phosphate) affected arsenic removal for Alu-cryo more than for MIP-cryo. Both composites still adsorbed well in the presence of counter-ions (copper and zinc) present at low concentrations (μg/l). The unchanged and selective adsorption in realistic water observed for MIP-cryo was concluded to be due to a successful imprinting, here controlled using a non-imprinted polymer (NIP). A development of MIP-cryo is needed, considering its low adsorption capacity. Copyright © 2012 Elsevier Ltd. All rights reserved.

  1. Modal analysis of additive manufactured carbon fiber reinforced polymer composite framework: Experiment and modeling

    Science.gov (United States)

    Dryginin, N. V.; Krasnoveikin, V. A.; Filippov, A. V.; Tarasov, S. Yu.; Rubtsov, V. E.

    2016-11-01

    Additive manufacturing by 3D printing is the most advanced and promising trend for making the multicomponent composites. Polymer-based carbon fiber reinforced composites demonstrate high mechanical properties combined with low weight characteristics of the component. This paper shows the results of 3D modeling and experimental modal analysis on a polymer composite framework obtained using additive manufacturing. By the example of three oscillation modes it was shown the agreement between the results of modeling and experimental modal analysis with the use of laser Doppler vibrometry.

  2. Electrosynthesis and catalytic activity of polymer-nickel particles composite electrode materials

    Energy Technology Data Exchange (ETDEWEB)

    Melki, Tahar; Zouaoui, Ahmed; Bendemagh, Barkahoum [Universite Ferhat Abbas, Setif (Algeria). Faculte des Sciences de l' Ingenieur. Dept. du Tronc Commun; Oliveira, Ione M.F. de; Oliveira, Gilver F. de [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Dept. de Quimica; Lepretre, Jean-Claude [UMR-5631 CNRS-INPG-UJF, St. Martin d' Heres Cedex (France). Lab. d' Electrochimie et de Physicochimie des Materiaux et Interfaces; Bucher, Christophe; Mou tet, Jean-Claude [Universite Joseph Fourier Grenoble 1 (France). Dept. de Chimie Moleculaire], e-mail: Jean-Claude.Moutet@ujf-grenoble.fr

    2009-07-01

    Nickel-polymer composite electrode materials have been synthesized using various strategies, all comprising the electrochemical reduction of nickel(II) cations or complexes, incorporated by either ion-exchange or complexation into various poly(pyrrole-carboxylate) thin films coated by oxidative electropolymerization onto carbon electrodes. The electrocatalytic activity and the stability of the different composites have been then evaluated in the course of the electrocatalytic hydrogenation of ketones and enones in aqueous electrolytes. The best results were obtained using nickel-polymer composites synthesized by electroreduction of nickel(II) ions complexed into polycarboxylate films, which are characterized by a high catalytic activity and a good operational stability. (author)

  3. Silver-containing polymer composition used in spacecraft and semiconductor optoelectronics control systems

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov, A. A., E-mail: alexchemtsu@rambler.ru; Tuev, V. I., E-mail: tvi-retem@main.tusur.ru [Tomsk State University of Control Systems and Radioelectronics, Tomsk, 634050 (Russian Federation)

    2015-10-27

    The copolymer of the vinyl chloride-maleic anhydride and silver nano- and microparticle (70 wt %) composition is offered as a conductive adhesive for fixing various chips on the dielectric substrate. The wiring volume resistivity is up to 3.1×10{sup −8} Ohm×m. The adhesive strength of the silver-containing polymer composition (70% of Ag) applied under a shear on the dielectric substrate is 106 N/mm{sup 2}. Adhesive layers obtained from these substances have a high thermal conductivity up to λ = 199.93 W/m×K that depends on the amount of Ag in the polymer composition.

  4. Synthesis and Characterization of Short Saccaharum Cilliare Fibre Reinforced Polymer Composites

    Directory of Open Access Journals (Sweden)

    A. S. Singha

    2009-01-01

    Full Text Available This paper deals with the synthesis of short Saccaharum Cilliare fibre (SC reinforced Urea-Formaldehyde (UF matrix based polymer composites. Present work reveals that mechanical properties such as: tensile strength, compressive strength, flexural strength and wear resistance of the UF matrix increase up to 30% fibre loading(in terms of weight and then decreases for higher loading when fibers are incorporated into the matrix polymer. Morphological and Thermal studies of the matrix, fibre and short fibre reinforced (SF-Rnf green composites have also been carried out. The results obtained emphasize the applications of these fibres, as potential reinforcing materials in bio based composites.

  5. Silver-containing polymer composition used in spacecraft and semiconductor optoelectronics control systems

    Science.gov (United States)

    Ivanov, A. A.; Tuev, V. I.

    2015-10-01

    The copolymer of the vinyl chloride-maleic anhydride and silver nano- and microparticle (70 wt %) composition is offered as a conductive adhesive for fixing various chips on the dielectric substrate. The wiring volume resistivity is up to 3.1×10-8 Ohm×m. The adhesive strength of the silver-containing polymer composition (70% of Ag) applied under a shear on the dielectric substrate is 106 N/mm2. Adhesive layers obtained from these substances have a high thermal conductivity up to λ = 199.93 W/m×K that depends on the amount of Ag in the polymer composition.

  6. Evaluation of tensile strength of hybrid fiber (jute/gongura) reinforced hybrid polymer matrix composites

    Science.gov (United States)

    Venkatachalam, G.; Gautham Shankar, A.; Vijay, Kumar V.; Chandan, Byral R.; Prabaharan, G. P.; Raghav, Dasarath

    2015-07-01

    The polymer matrix composites attract many industrial applications due to its light weight, less cost and easy for manufacturing. In this paper, an attempt is made to prepare and study of the tensile strength of hybrid (two natural) fibers reinforced hybrid (Natural + Synthetic) polymer matrix composites. The samples were prepared with hybrid reinforcement consists of two different fibers such as jute and Gongura and hybrid polymer consists of polyester and cashew nut shell resins. The hybrid composites tensile strength is evaluated to study the influence of various fiber parameters on mechanical strength. The parameters considered here are the duration of fiber treatment, the concentration of alkali in fiber treatment and nature of fiber content in the composites.

  7. 25th Anniversary Article: Polymer-Particle Composites: Phase Stability and Applications in Electrochemical Energy Storage

    KAUST Repository

    Srivastava, Samanvaya

    2013-12-09

    Polymer-particle composites are used in virtually every field of technology. When the particles approach nanometer dimensions, large interfacial regions are created. In favorable situations, the spatial distribution of these interfaces can be controlled to create new hybrid materials with physical and transport properties inaccessible in their constituents or poorly prepared mixtures. This review surveys progress in the last decade in understanding phase behavior, structure, and properties of nanoparticle-polymer composites. The review takes a decidedly polymers perspective and explores how physical and chemical approaches may be employed to create hybrids with controlled distribution of particles. Applications are studied in two contexts of contemporary interest: battery electrolytes and electrodes. In the former, the role of dispersed and aggregated particles on ion-transport is considered. In the latter, the polymer is employed in such small quantities that it has been historically given titles such as binder and carbon precursor that underscore its perceived secondary role. Considering the myriad functions the binder plays in an electrode, it is surprising that highly filled composites have not received more attention. Opportunities in this and related areas are highlighted where recent advances in synthesis and polymer science are inspiring new approaches, and where newcomers to the field could make important contributions. Polymer-particle composites are used in virtually every field of technology. When the particles approach nanometer dimensions, large interfacial regions are created that can be exploited for applications. The fundamental approaches and bottom-up synthesis strategies for understanding and controlling nanoparticle dispersion in polymers are reviewed. Applications of these approaches for creating polymer-particle composite electrolytes and electrodes for energy storage are also considered. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  8. Nanoparticles Decorated on Resin Particles and Their Flame Retardancy Behavior for Polymer Composites

    Directory of Open Access Journals (Sweden)

    Nour F. Attia

    2017-01-01

    Full Text Available New nanocomposites have been developed by doping of amberlite IR120 resin with spherical TiO2 nanoparticles in the presence of maleate diphosphate. Polystyrene composites of resin, maleate diphosphate, and resin-maleate diphosphate were prepared individually. This is in addition to preparation of polymer nanocomposites of polystyrene-resin doped TiO2 nanoparticles-maleate diphosphate. The flame retardancy and thermal stability properties of these developed polymer composites were evaluated. The inclusion of resin and resin doped nanoparticles improved the fire retardant behavior of polystyrene composites and enhanced their thermal stability. Synergistic behavior between flame retardant, resin, and nanoparticles was detected. The rate of burning of the polymer nanocomposites was recorded as 10.7 mm/min achieving 77% reduction compared to pure polystyrene (46.5 mm/min. The peak heat release rate (PHRR of the new polymer composites has reduced achieving 46% reduction compared to blank polymer. The morphology and dispersion of nanoparticles on resin and in polymer nanocomposites were characterized using transmission and scanning electron microscopy, respectively. The flame retardancy and thermal properties were evaluated using UL94 flame chamber, cone tests, and thermogravimetric analysis, respectively.

  9. Novel method of polymer/low-melting-point metal alloy/light metal fiber composite fabrication

    Directory of Open Access Journals (Sweden)

    J. Park

    2016-07-01

    Full Text Available A novel method of polymer/low-melting-point metal alloy (LMA/light metal fiber composite fabrication is proposed to solve problems of polymer/metal composites. The first step is mixing light metal particles with LMA at a temperature above the melting point of the LMA. The second step is cold extrusion of the LMA/light metal particles to fabricate LMA/light metal fibers. Thus, the LMA/light metal fibers with a density of ~4.5 g/cm3 were obtained. The last step is compounding a polymer with the LMA/light metal fibers at the processing temperature of the polymer above the melting points of the LMA. The effects of the length and the cross-sectional shape of light metal fiber on the morphology of the LMA/light metal fibers in the polymer matrix were studied, as were electrical conductivities and mechanical properties of the composites. As the length and/or the cross-sectional aspect ratio of the fibers was increased, the domains of LMA/light metal fibers formed more networks so that the electrical conductivity increased, and specific surface area of the domains increased so that notched Izod impact strength was improved. Thus, the polymer/LMA/light metal fiber composites were fabricated without degrading processability even at 60 vol% loading and the electrical conductivities over 103 S/cm were achieved.

  10. Structure and composition of the superconducting phase in alkali iron selenide KyFe1.6+xSe2

    Science.gov (United States)

    Carr, Scott V.; Louca, Despina; Siewenie, Joan; Huang, Q.; Wang, Aifeng; Chen, Xianhui; Dai, Pengcheng

    2014-04-01

    We use neutron diffraction to study the temperature evolution of the average structure and local lattice distortions in insulating and superconducting potassium iron selenide KyFe1.6+xSe2. In the high temperature paramagnetic state, both materials have a single phase with a crystal structure similar to that of the BaFe2As2 family of iron pnictides. While the insulating KyFe1.6+xSe2 forms a √5 ×√5 iron vacancy ordered block antiferromagnetic (AF) structure at low temperature, the superconducting compounds spontaneously phase separate into an insulating part with √5 ×√5 iron vacancy order and a superconducting phase with chemical composition of KzFe2Se2 and BaFe2As2 structure. Therefore, superconductivity in alkaline iron selenides arises from alkali deficient KzFe2Se2 in the matrix of the insulating block AF phase.

  11. Polymer-Derived In- Situ Metal Matrix Composites Created by Direct Injection of a Liquid Polymer into Molten Magnesium

    Science.gov (United States)

    Sudarshan; Terauds, Kalvis; Anilchandra, A. R.; Raj, Rishi

    2014-02-01

    We show that a liquid organic precursor can be injected directly into molten magnesium to produce nanoscale ceramic dispersions within the melt. The castings made in this way possess good resistance to tensile deformation at 673 K (400 °C), confirming the non-coarsening nature of these dispersions. Direct liquid injection into molten metals is a significant step toward inserting different chemistries of liquid precursors to generate a variety of polymer-derived metal matrix composites.

  12. Reusing recycled fibers in high-value fiber-reinforced polymer composites: Improving bending strength by surface cleaning

    OpenAIRE

    Shi, Jian; Bao, Limin; Kobayashi, Ryouhei; Kato, Jun; Kemmochi, Kiyoshi

    2012-01-01

    Glass fiber-reinforced polymer (GFRP) composites and carbon fiber-reinforced polymer (CFRP) composites were recycled using superheated steam. Recycled glass fibers (R-GFs) and recycled carbon fibers (R-CFs) were surface treated for reuse as fiber-reinforced polymer (FRP) composites. Treated R-GFs (TR-GFs) and treated R-CFs (TR-CFs) were characterized by scanning electron microscopy (SEM) and remanufactured by vacuum-assisted resin transfer molding (VARTM). Most residual resin impurities were ...

  13. Reusing recycled fibers in high-value fiber-reinforced polymer composites: Improving bending strength by surface cleaning

    OpenAIRE

    Shi, Jian; Bao, Limin; Kobayashi, Ryouhei; Kato, Jun; Kemmochi, Kiyoshi

    2012-01-01

    Glass fiber-reinforced polymer (GFRP) composites and carbon fiber-reinforced polymer (CFRP) composites were recycled using superheated steam. Recycled glass fibers (R-GFs) and recycled carbon fibers (R-CFs) were surface treated for reuse as fiber-reinforced polymer (FRP) composites. Treated R-GFs (TR-GFs) and treated R-CFs (TR-CFs) were characterized by scanning electron microscopy (SEM) and remanufactured by vacuum-assisted resin transfer molding (VARTM). Most residual resin impurities were ...

  14. Conductivity of microfibrillar polymer-polymer composites with CNT-loaded microfibrils or compatibilizer: A comparative study

    Directory of Open Access Journals (Sweden)

    S. Fakirov

    2013-07-01

    Full Text Available Conductive polymer composites have wide ranging applications, but when they are produced by conventional melt blending, high conductive filler loadings are normally required, hindering their processability and reducing mechanical properties. In this study, two types of polymer-polymer composites were studied: i microfibrillar composites (MFC of polypropylene (PP and 5 wt% carbon nanotube (CNT loaded poly(butylene terephthalate (PBT as reinforcement, and ii maleic anhydride-grafted polypropylene (PP-g-MA compatibilizer, loaded with 5 wt% CNTs introduced into an MFC of PP and poly(ethylene terephthalate (PET in concentrations of 5 and 10 wt%. For the compatibilized composite type, PP and PET were melt-blended, cold-drawn and pelletized, followed by dry-mixing with PP-g-MA/CNT, re-extrusion at 200°C, and cold-drawing. The drawn blends produced were compression moulded to produce sheets with MFC structure. Using scanning electron microscopy, CNTs coated with PP-g-MA could be observed at the interface between PP matrix and PET microfibrils in the compatibilized blends. The volume resistivities tested by four-point test method were: 2.87•108 and 9.93•107 Ω•cm for the 66.5/28.5/5 and 63/27/10 (by wt% PP/PET/(PP-g-MA/CNT blends, corresponding to total CNT loadings (in the composites of 0.07 vol% (0.24 wt% and 0.14 vol% (0.46 wt%, respectively. For the non-compatibilized MFC types based on PP/(PBT/CNT with higher and lower melt flow grades of PP, the resistivities of 70/(95/5 blends were 1.9•106 and 1.5•107 Ω•cm, respectively, corresponding to a total filler loading (in the composite of 0.44 vol% (1.5 wt% in both MFCs.

  15. Polymer Composition and Substrate Influences on the Adhesive Bonding of a Biomimetic, Cross-Linking Polymer

    OpenAIRE

    Matos-Pérez, Cristina R.; White, James D.; Wilker, Jonathan J.

    2012-01-01

    Hierarchical biological materials such as bone, sea shells, and marine bioadhesives are providing inspiration for the assembly of synthetic molecules into complex structures. The adhesive system of marine mussels has been the focus of much attention in recent years. Several catechol-containing polymers are being developed to mimic the cross-linking of proteins containing 3,4-dihydroxyphenylalanine (DOPA) used by shellfish for sticking to rocks. Many of these biomimetic polymer systems have be...

  16. Thermal and Mechanical Characteristics of Polymer Composites Based on Epoxy Resin, Aluminium Nanopowders and Boric Acid

    Science.gov (United States)

    Nazarenko, O. B.; Melnikova, T. V.; Visakh, P. M.

    2016-01-01

    The epoxy polymers are characterized by low thermal stability and high flammability. Nanoparticles are considered to be effective fillers of polymer composites for improving their thermal and functional properties. In this work, the epoxy composites were prepared using epoxy resin ED-20, polyethylene polyamine as a hardener, aluminum nanopowder and boric acid fine powder as flame-retardant filler. The thermal characteristics of the obtained samples were studied using thermogravimetric analysis and differential scanning calorimetry. The mechanical characteristics of epoxy composites were also studied. It was found that an addition of all fillers enhances the thermal stability and mechanical characteristics of the epoxy composites. The best thermal stability showed the epoxy composite filled with boric acid. The highest flexural properties showed the epoxy composite based on the combination of boric acid and aluminum nanopowder.

  17. Compressive behavior and energy absorption of metal porous polymer composite with interpenetrating network structure

    Institute of Scientific and Technical Information of China (English)

    LIU Yu; GONG Xiao-lu

    2006-01-01

    Interpenetrating phase composites (IPCs) are a new class of composite materials with improved combinations of mechanical and physical properties. This study was performed on a new type of IPC called metal porous polymer composite (MPPC) with an interpenetrating network structure. Aluminum-polypropylene (Al-PE) and Aluminum-epoxy resin (Al-Ep) composites were produced by infiltrating the polymer in the aluminum foam. The composite microstructures were characterized using SEM observation. The compressive behavior and energy absorption characteristics of MPPC were investigated and compared with the aluminum foams. The compressive modulus of composite was compared with the VOIGT-REUSS bounds and HASHIN-SHTRIKMAN (H-S) bounds models. The experimental modulus of compressive tests falls well within the theoretical models.

  18. [An investigation of HAP/organic polymer composite coatings prepared by electrochemical co-deposition technique].

    Science.gov (United States)

    Hu, Haobing; Lin, Changjian; Leng, Yang

    2003-03-01

    An electrochemical co-deposition technique has been developed to prepare a hydroxyapatite (HAP)/organic polymer composite coatings on Ti surface as new biomaterial of hard tissue. The composite coating of organic polymer and calcium phosphate is formed by adding a water soluble polymer of the ethylene series to NH4H2PO4-Ca (NO3)2 solution when conducting an appropriate electrochemical co-deposition experiment. The XRD, SEM, XPS, SIMS and nano indent measurements were performed to characterize the morphology, composition, structure and surface stiffness of the composite coating. It was found that the morphology and surface hardness of the coatings showed a remarkable modification when introducing a minor polymer to HAP coating, and the bonding force between the coating and metal substrate was distinctly increased. The incorporation of minor organic polymer into the HAP compound at molecular level will improve the mechanical properties and morphology of the composite coatings, and this may be helpful to raising its bio-activity.

  19. Molecular modeling of polymer composite-analyte interactions in electronic nose sensors

    Science.gov (United States)

    Shevade, A. V.; Ryan, M. A.; Homer, M. L.; Manfreda, A. M.; Zhou, H.; Manatt, K. S.

    2003-01-01

    We report a molecular modeling study to investigate the polymer-carbon black (CB) composite-analyte interactions in resistive sensors. These sensors comprise the JPL electronic nose (ENose) sensing array developed for monitoring breathing air in human habitats. The polymer in the composite is modeled based on its stereoisomerism and sequence isomerism, while the CB is modeled as uncharged naphthalene rings with no hydrogens. The Dreiding 2.21 force field is used for the polymer, solvent molecules and graphite parameters are assigned to the carbon black atoms. A combination of molecular mechanics (MM) and molecular dynamics (NPT-MD and NVT-MD) techniques are used to obtain the equilibrium composite structure by inserting naphthalene rings in the polymer matrix. Polymers considered for this work include poly(4-vinylphenol), polyethylene oxide, and ethyl cellulose. Analytes studied are representative of both inorganic and organic compounds. The results are analyzed for the composite microstructure by calculating the radial distribution profiles as well as for the sensor response by predicting the interaction energies of the analytes with the composites. c2003 Elsevier Science B.V. All rights reserved.

  20. Nonlinearity and Strain-Rate Dependence in the Deformation Response of Polymer Matrix Composites Modeled

    Science.gov (United States)

    Goldberg, Robert K.

    2000-01-01

    There has been no accurate procedure for modeling the high-speed impact of composite materials, but such an analytical capability will be required in designing reliable lightweight engine-containment systems. The majority of the models in use assume a linear elastic material response that does not vary with strain rate. However, for containment systems, polymer matrix composites incorporating ductile polymers are likely to be used. For such a material, the deformation response is likely to be nonlinear and to vary with strain rate. An analytical model has been developed at the NASA Glenn Research Center at Lewis Field that incorporates both of these features. A set of constitutive equations that was originally developed to analyze the viscoplastic deformation of metals (Ramaswamy-Stouffer equations) was modified to simulate the nonlinear, rate-dependent deformation of polymers. Specifically, the effects of hydrostatic stresses on the inelastic response, which can be significant in polymers, were accounted for by a modification of the definition of the effective stress. The constitutive equations were then incorporated into a composite micromechanics model based on the mechanics of materials theory. This theory predicts the deformation response of a composite material from the properties and behavior of the individual constituents. In this manner, the nonlinear, rate-dependent deformation response of a polymer matrix composite can be predicted.

  1. Quickly Updatable Hologram Images Using Poly(N-vinyl Carbazole (PVCz Photorefractive Polymer Composite

    Directory of Open Access Journals (Sweden)

    Wataru Sakai

    2012-08-01

    Full Text Available Quickly updatable hologram images using photorefractive (PR polymer composite based on poly(N-vinyl carbazole (PVCz is presented. PVCz is one of the pioneer materials of photoconductive polymers. PR polymer composite consists of 44 wt % of PVCz, 35 wt % of 4-azacycloheptylbenzylidene-malonitrile (7-DCST as a nonlinear optical dye, 20 wt % of carbazolylethylpropionate (CzEPA as a photoconductive plasticizer and 1 wt % of 2,4,7-trinitro-9-fluorenone (TNF as a sensitizer. PR composite gives high diffraction efficiency of 68% at E = 45 V μm−1. Response speed of optical diffraction is the key parameter for real-time 3D holographic display. The key parameter for obtaining quickly updatable holographic images is to control the glass transition temperature lower enough to enhance chromophore orientation. Object image of the reflected coin surface recorded with reference beam at 532 nm (green beam in the PR polymer composite is simultaneously reconstructed using a red probe beam at 642 nm. Instead of using a coin object, an object image produced by a computer was displayed on a spatial light modulator (SLM and used for the hologram. The reflected object beam from an SLM was interfered with a reference beam on PR polymer composite to record a hologram and simultaneously reconstructed by a red probe beam.

  2. Bio-Inspired Composite Interfaces: Controlling Hydrogel Mechanics via Polymer-Nanoparticle Coordination Bond Dynamics

    Science.gov (United States)

    Holten-Andersen, Niels

    2015-03-01

    In soft nanocomposite materials, the effective interaction between polymer molecules and inorganic nanoparticle surfaces plays a critical role in bulk mechanical properties. However, controlling these interfacial interactions remains a challenge. Inspired by the adhesive chemistry in mussel threads, we present a novel approach to control composite mechanics via polymer-particle interfacial dynamics; by incorporating iron oxide nanoparticles (Fe3O4 NPs) into a catechol-modified polymer network the resulting hydrogels are crosslinked via reversible coordination bonds at Fe3O4 NP surfaces thereby providing a dynamic gel network with robust self-healing properties. By studying the thermally activated composite network relaxation processes we have found that the polymer-NP binding energy can be controlled by engineering both the organic and inorganic side of the interface.

  3. Dynamics of nanoparticle assembly from disjointed images of nanoparticle-polymer composites

    Science.gov (United States)

    Murthy, Chaitanya R.; Gao, Bo; Tao, Andrea R.; Arya, Gaurav

    2016-02-01

    Understanding how nanoparticles (NPs) diffuse, stick, and assemble into larger structures within polymers is key to the design and fabrication of NP-polymer composites. Here we describe an approach for inferring the dynamic parameters of NP assembly from spatially and temporally disjointed images of composites. The approach involves iterative adjustment of the parameters of a kinetic model of assembly until the computed size statistics of NP clusters match those obtained from high-throughput analysis of the experimental images. Application of this approach to the assembly of shaped, metal NPs in polymer films suggests that NP structures grow via a cluster-cluster aggregation mechanism, where NPs and their clusters diffuse with approximately Stokes-Einstein diffusivity and stick to other NPs or clusters with a probability that depends strongly on the size and shape of the NPs and the molecular weight of the polymer.

  4. Electrically conductive, optically transparent polymer/carbon nanotube composites

    Science.gov (United States)

    Connell, John W. (Inventor); Smith, Jr., Joseph G. (Inventor); Harrison, Joycelyn S. (Inventor); Park, Cheol (Inventor); Watson, Kent A. (Inventor); Ounaies, Zoubeida (Inventor)

    2011-01-01

    The present invention is directed to the effective dispersion of carbon nanotubes (CNTs) into polymer matrices. The nanocomposites are prepared using polymer matrices and exhibit a unique combination of properties, most notably, high retention of optical transparency in the visible range (i.e., 400-800 nm), electrical conductivity, and high thermal stability. By appropriate selection of the matrix resin, additional properties such as vacuum ultraviolet radiation resistance, atomic oxygen resistance, high glass transition (T.sub.g) temperatures, and excellent toughness can be attained. The resulting nanocomposites can be used to fabricate or formulate a variety of articles such as coatings on a variety of substrates, films, foams, fibers, threads, adhesives and fiber coated prepreg. The properties of the nanocomposites can be adjusted by selection of the polymer matrix and CNT to fabricate articles that possess high optical transparency and antistatic behavior.

  5. Interlaminar damage of carbon fiber reinforced polymer composite laminate under continuous wave laser irradiation

    Science.gov (United States)

    Liu, Yan-Chi; Wu, Chen-Wu; Huang, Yi-Hui; Song, Hong-Wei; Huang, Chen-Guang

    2017-01-01

    The interlaminar damages were investigated on the carbon fiber reinforced polymer (CFRP) composite laminate under laser irradiation. Firstly, the laminated T700/BA9916 composites were exposed to continuous wave laser irradiation. Then, the interface cracking patterns of such composite laminates were examined by optical microscopy and scanning electron microscopy. Finally, the Finite Element Analysis (FEA) was performed to compute the interface stress of the laminates under laser irradiation. And the effects of the laser parameters on the interlaminar damage were discussed.

  6. The Usage Of Nutshell In The Production of Polypropylene Based on Polymer Composite Panels

    OpenAIRE

    Akbaş, Selçuk; Tufan, Mürşit; Güleç, Türker; Taşçıoğlu, Cihat; Hüseyin PEKER

    2013-01-01

    Natural fibers have been commonly utilized to reinforced materials for many years. Recently due to advantages of natural fibers such as low cost, high physical and mechanical resistance are produced plastic-composite materials by mixing various proportions. In addition, plastic composites are used natural fibers include agricultural wastes (wheat straw, rice straw, hemp fiber, shells of various dry fruits, etc.). In this study, polymer composites were manufactured using waste nutshell flour a...

  7. A Fully Contained Resin Infusion Process for Fiber-Reinforced Polymer Composite Fabrication and Repair

    Science.gov (United States)

    2013-01-01

    Assisted Resin Transfer Molding ( VARTM ) process is applicable for fiber-reinforced polymer (FRP) composite fabrication and repair. However, VARTM in...scenario is a fully enclosed VARTM system that limits the need for laboratory or manufacturing equipment. The Bladder-Bag VARTM (BBVARTM) technique...composite fabrication, VARTM , composite repair, in-field repair 16. SECURITY CLASSIFICATION OF: 17. LIMITATION OF ABSTRACT UU 18. NUMBER

  8. Enhanced thermal conductance of polymer composites through embeddingaligned carbon nanofibers

    Directory of Open Access Journals (Sweden)

    Dale K. Hensley

    2016-07-01

    Full Text Available The focus of this work is to find a more efficient method of enhancing the thermal conductance of polymer thin films. This work compares polymer thin films embedded with randomly oriented carbon nanotubes to those with vertically aligned carbon nanofibers. Thin films embedded with carbon nanofibers demonstrated a similar thermal conductance between 40–60 μm and a higher thermal conductance between 25–40 μm than films embedded with carbon nanotubes with similar volume fractions even though carbon nanotubes have a higher thermal conductivity than carbon nanofibers.

  9. On modeling shape memory polymers as elastic two-phase composite materials

    OpenAIRE

    Gilormini, Pierre; Diani, Julie

    2012-01-01

    International audience; A model has been proposed recently, which describes the experimentally observed mechanical behavior of some shape memory polymers. It considers a purely thermoelastic behavior, without strain rate effects, and assumes essentially that the polymer can be considered as a two-phase composite, with glassy and rubbery phases having volume fractions that depend on temperature only. Since a uniform stress hypothesis was used in the original formulation, with an inconsistency ...

  10. Self-healing in single and multiple fiber(s) reinforced polymer composites

    OpenAIRE

    2010-01-01

    You Polymer composites have been attractive medium to introduce the autonomic healing concept into modern day engineering materials. To date, there has been significant research in self-healing polymeric materials including several studies specifically in fiber reinforced polymers. Even though several methods have been suggested in autonomic healing materials, the concept of repair by bleeding of enclosed functional agents has garnered wide attention by the scientific community. A self-...

  11. Analytical Modeling of the High Strain Rate Deformation of Polymer Matrix Composites

    Science.gov (United States)

    Goldberg, Robert K.; Roberts, Gary D.; Gilat, Amos

    2003-01-01

    The results presented here are part of an ongoing research program to develop strain rate dependent deformation and failure models for the analysis of polymer matrix composites subject to high strain rate impact loads. State variable constitutive equations originally developed for metals have been modified in order to model the nonlinear, strain rate dependent deformation of polymeric matrix materials. To account for the effects of hydrostatic stresses, which are significant in polymers, the classical 5 plasticity theory definitions of effective stress and effective plastic strain are modified by applying variations of the Drucker-Prager yield criterion. To verify the revised formulation, the shear and tensile deformation of a representative toughened epoxy is analyzed across a wide range of strain rates (from quasi-static to high strain rates) and the results are compared to experimentally obtained values. For the analyzed polymers, both the tensile and shear stress-strain curves computed using the analytical model correlate well with values obtained through experimental tests. The polymer constitutive equations are implemented within a strength of materials based micromechanics method to predict the nonlinear, strain rate dependent deformation of polymer matrix composites. In the micromechanics, the unit cell is divided up into a number of independently analyzed slices, and laminate theory is then applied to obtain the effective deformation of the unit cell. The composite mechanics are verified by analyzing the deformation of a representative polymer matrix composite (composed using the representative polymer analyzed for the correlation of the polymer constitutive equations) for several fiber orientation angles across a variety of strain rates. The computed values compare favorably to experimentally obtained results.

  12. Synergy among binary (MWNT, SLG) nano-carbons in polymer nano-composites: a Raman study

    Science.gov (United States)

    Xu, Peng; Loomis, James; King, Ben; Panchapakesan, Balaji

    2012-08-01

    Load transfer and mechanical strength of reinforced polymers are fundamental to developing advanced composites. This paper demonstrates enhanced load transfer and mechanical strength due to synergistic effects in binary mixtures of nano-carbon/polymer composites. Different compositional mixtures (always 1 wt% total) of multi-wall carbon nanotubes (MWNTs) and single-layer graphene (SLG) were mixed in polydimethylsiloxane (PDMS), and effects on load transfer and mechanical strength were studied using Raman spectroscopy. Significant shifts in the G-bands were observed both in tension and compression for single as well as binary nano-carbon counterparts in polymer composites. Small amounts of MWNT0.1 dispersed in SLG0.9/PDMS samples (subscripts represent weight percentage) reversed the sign of the Raman wavenumbers from positive to negative values demonstrating reversal of lattice stress. A wavenumber change from 10 cm-1 in compression to 10 cm-1 in tension, and an increase in elastic modulus of ˜103% was observed for MWNT0.1SLG0.9/PDMS with applied uniaxial tension. Extensive scanning electron microscopy revealed the bridging of MWNT between two graphene plates in polymer composites. Mixing small amounts of MWNTs in SLG/PDMS eliminated the previously reported compressive deformation of SLG and significantly enhanced load transfer and mechanical strength of composites in tension. The orientation order of MWNT with application of uniaxial tensile strain directly affected the shift in Raman wavenumbers (2D-band and G-band) and load transfer. It is observed that the cooperative behavior of binary nano-carbons in polymer composites resulted in enhanced load transfer and mechanical strength. Such binary compositions could be fundamental to developing advanced composites such as nano-carbon based mixed dimensional systems.

  13. Processing and properties of ceramic matrix-polymer composites for dental applications

    Science.gov (United States)

    Huang, Hsuan Yao

    The basic composite structure of natural hard tissue was used to guide the design and processing of dental restorative materials. The design incorporates the methodology of using inorganic minerals as the main structural phase reinforced with a more ductile but tougher organic phase. Ceramic-polymer composites were prepared by slip casting a porous ceramic structure, heating and chemical treating the porous preform, infiltrating with monomer and then curing. The three factors that determined the mechanical properties of alumina-polymer composites were the type of polymer used, the method of silane treatments, and the type of bond between particles in the porous preforms. Without the use of silane coupling agents, the composites were measured to have a lower strength. The composite with a more "flexible" porous alumina network had a greater ability to plastically dissipate the energy of propagating cracks. However, the aggressive nature of the alumina particles on opposing enamel requires that these alumina-polymer composites have a wear compatible coating for practical application. A route to dense bioactive apatite wollastonite glass ceramics (AWGC)-polymer composites was developed. The problems associated with glass dissolution into the aqueous medium for slip casting were overcome with the use of silane. The role of heating rate and development of ceramic compact microstructure on composite properties was explored. In general, if isothermal heating was not applied, decreasing heating rate increased glass crystallinity and particle-particle fusion, but decreased pore volume. Also composite strength and fracture toughness decreased while modulus and hardness increased with decreasing heating rate. If isothermal heating was applied, glass crystallinity, pore content, and composite mechanical properties showed relatively little change regardless of the initial heating rate. The potential of AWGC-polymer composites for dental and implant applications was explored

  14. Light emitting composite rods based on porous silicon in ormosils and polymer matrices for optical applications

    Science.gov (United States)

    Naziruddin Khan, M.; Al Dwayyan, A. S.; Aldalbahi, Ali

    2017-06-01

    Porous silicon (PSi) colloidal solution was directly encapsulated in ormosils and polymer sols to develop nanocomposite based rods. PSi is highly crystalline of around 5-8 nm particles size confirmed by Transmission electron microscopy. SEM images indicate that structural morphology of PSi in the ormosils and polymer environment are different. No major effect on infrared property of PSi particles in the Ormosils and polymers are observed. Absorption and emission property of PSi is influenced when the PSi combined in Ormosils and polymer matrix. Significant photoluminescence stability of PSi in the both matrices is found. Subsequently the spontaneous emission of polished PSi composite ormosils and polymer rods were studied under the pico second tunable laser source. The exhibited spontaneous emission is quite significant. Remarkable stability and optically active of PSi particles in polymer over the ormosils is observed over time. Such composites based on PSi in ormosils and polymer may possibly be improved if high concentration of colloidal solution is employed for further optical test under laser.

  15. High Strain Rate Deformation Modeling of a Polymer Matrix Composite. Part 1; Matrix Constitutive Equations

    Science.gov (United States)

    Goldberg, Robert K.; Stouffer, Donald C.

    1998-01-01

    Recently applications have exposed polymer matrix composite materials to very high strain rate loading conditions, requiring an ability to understand and predict the material behavior under these extreme conditions. In this first paper of a two part report, background information is presented, along with the constitutive equations which will be used to model the rate dependent nonlinear deformation response of the polymer matrix. Strain rate dependent inelastic constitutive models which were originally developed to model the viscoplastic deformation of metals have been adapted to model the nonlinear viscoelastic deformation of polymers. The modified equations were correlated by analyzing the tensile/ compressive response of both 977-2 toughened epoxy matrix and PEEK thermoplastic matrix over a variety of strain rates. For the cases examined, the modified constitutive equations appear to do an adequate job of modeling the polymer deformation response. A second follow-up paper will describe the implementation of the polymer deformation model into a composite micromechanical model, to allow for the modeling of the nonlinear, rate dependent deformation response of polymer matrix composites.

  16. Effect of swift heavy ion irradiation on dielectrics properties of polymer composite films

    Energy Technology Data Exchange (ETDEWEB)

    Singh, N.L. [Physics Department, M.S. University of Baroda, Vadodara 390002 (India)]. E-mail: singhnl_msu@yahoo.com; Qureshi, Anjum [Physics Department, M.S. University of Baroda, Vadodara 390002 (India)]. E-mail: anjumqur@gmail.com; Singh, F. [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110067 (India); Avasthi, D.K. [Inter University Accelerator Centre, Aruna Asaf Ali Marg, New Delhi 110067 (India)

    2007-02-25

    Ferric oxalate was used as organometallics fillers in polyvinyl chloride (PVC) to form polymer matrix composite films at different concentration of filler. These films were irradiated with 80 MeV O{sup 6+} ions at the fluences of 1 x 10{sup 11} and 1 x 10{sup 12} ions/cm{sup 2}. The radiation induced modifications in dielectric properties, microhardness, surface morphology and surface roughness of polymer composite films have been investigated at different concentration (i.e. 5%, 10% and 15%) of filler. It was observed that hardness and electrical conductivity of the films increase with the concentration of the dispersed ferric oxalate and also with the fluence. From the analysis of frequency, f, dependence of dielectric constant, {epsilon}, it has been found that the dielectric response in both pristine and irradiated samples obey the Universal law given by {epsilon} {proportional_to} f {sup n-1}. The dielectric constant/loss is observed to change significantly due to the irradiation. This suggests that ion beam irradiation promotes (i) the metal to polymer bonding and (ii) convert the polymeric structure into hydrogen depleted carbon network. Thus irradiation makes the polymer harder and more conductive. Atomic force microscopy (AFM) shows that average roughness (R {sub a}) of the irradiated films is lower than that of unirradiated films. Surface morphology of irradiated polymer composite films is observed to change. Scanning electron microscopy (SEM) results show that partial agglomeration of fillers in the polymer matrix.

  17. A photo-oxidation mechanism for patterning and hologram formation in conjugated polymer/glass composites

    Science.gov (United States)

    Levi, Ofer; Perepelitsa, Galina; Davidov, Dan; Shalom, Shoshy; Benjamin, Iris; Neumann, Ronny; Agranat, Aharon J.; Avny, Yair

    2000-08-01

    Improved diffraction efficiency was observed in holograms stored in disordered conjugated polymer/glass composites. The conjugated polymers used were alkoxy substituted poly(phenylenevinylne) analogs and the glass matrices were zirconia-organosilica xerogels. Investigation of the mechanism of hologram formation revealed evidence of a photochromic process consisting of light induced photo-oxidation (bleaching) of the embedded conjugated polymer resulting in the formation of an absorption grating and a phase grating. Investigation of the hologram formation revealed that the process was oxygen dependent. Oxygen removal increases hologram formation time by more than an order of magnitude and halves the total hologram efficiency. The oxygen dependence was also highly correlated with photobleaching of the samples and beam interaction of the writing beams. The chemical transformations upon photobleaching were shown by infrared and Raman spectroscopy to involve chain scission and oxidation of the polymer at the vinylic position of the conjugated polymer. Film preparation of the composites was optimized showing a tenfold improvement in the holographic properties compared to our previous results. The optimized treatment method allows for a high, >20%, diffraction efficiency, η, to be obtained for the 2.5-μm-thick polymer/glass films. Light sensitivity was compared for several polymer/glass composites and was correlated to the absorption curves and holographic diffraction efficiency showing that the new composites and film preparation techniques are promising for holographic materials sensitive in the blue and ultraviolet spectral regions. A method of information fixing by preventing oxygen entry to the composite film resulted in a fourfold increase of the erasure time. These findings suggest that holograms can be fixed for a long term by nonoxygen permeable coating, applied after hologram formation.

  18. Electrochromic artificial muscles based on nanoporous metal-polymer composites

    NARCIS (Netherlands)

    Detsi, E.; Onck, P. R.; De Hosson, J. T. M.

    2013-01-01

    This work shows that a nano-coating of electrochromic polymer grown onto the ligaments of nanoporous gold causes reversible dimensional and color changes during electrochemical actuation. This combination of electromechanical and optical properties opens additional avenues for the applications of

  19. Low Loss Polymer Nanoparticle Composites for RF Applications

    Science.gov (United States)

    2014-09-17

    for Radio Frequency Applications” M.Vural, B. Crowgey, L. Kempel, and P. Kofinas. Journal of Materials Chemistry C, 2, 756-763, 2014. DOI...10.1039/C3TC32113D. “ Surfactant -modified Nickel Zinc Iron Oxide / Polymer Nanocomposites for Radio Frequency Applications” T-I Yang, L. Kempel, and P

  20. Electrochromic artificial muscles based on nanoporous metal-polymer composites

    NARCIS (Netherlands)

    Detsi, E.; Onck, P. R.; De Hosson, J. T. M.

    2013-01-01

    This work shows that a nano-coating of electrochromic polymer grown onto the ligaments of nanoporous gold causes reversible dimensional and color changes during electrochemical actuation. This combination of electromechanical and optical properties opens additional avenues for the applications of ar

  1. Patterns of efficiency and degradation of composite polymer solar cells

    NARCIS (Netherlands)

    Jeranko, T; Tributsch, H; Sariciftci, NS; Hummelen, JC

    2004-01-01

    Bulk-heterojunction plastic solar cells (PSC) produced from a conjugated polymer, poly(2-methoxy-5-(3',7'-dimethyloctyl-oxy)-1,4-phenylenevinylene) (MDMO-PPV), and a methanofullerene [6,6]-phenyl C-61-butyric acid methyl ester (PCBM) were investigated using photocurrent imaging techniques to

  2. Patterns of efficiency and degradation of composite polymer solar cells

    NARCIS (Netherlands)

    Jeranko, T; Tributsch, H; Sariciftci, NS; Hummelen, JC

    2004-01-01

    Bulk-heterojunction plastic solar cells (PSC) produced from a conjugated polymer, poly(2-methoxy-5-(3',7'-dimethyloctyl-oxy)-1,4-phenylenevinylene) (MDMO-PPV), and a methanofullerene [6,6]-phenyl C-61-butyric acid methyl ester (PCBM) were investigated using photocurrent imaging techniques to determi

  3. Patterns of efficiency and degradation of composite polymer solar cells

    NARCIS (Netherlands)

    Jeranko, T; Tributsch, H; Sariciftci, NS; Hummelen, JC

    2004-01-01

    Bulk-heterojunction plastic solar cells (PSC) produced from a conjugated polymer, poly(2-methoxy-5-(3',7'-dimethyloctyl-oxy)-1,4-phenylenevinylene) (MDMO-PPV), and a methanofullerene [6,6]-phenyl C-61-butyric acid methyl ester (PCBM) were investigated using photocurrent imaging techniques to determi

  4. Incorporation of piezoelectric Pb(Zr,Ti)O3 fibers into ceramic/polymer composites

    Science.gov (United States)

    Safari, Ahmad; Janas, Victor; Jadidian, Bahram; French, Jonathan D.; Weitz, Gregory E.; Luke, John E.; Cass, Bud

    1996-05-01

    The processing of Pb(Zr,Ti)O3, or PZT, fiber and fiber/polymer composites for transducer applications is discussed. Green PZT fibers, 80 to 100 micrometers in diameter, were formed at Advanced Cerametrics, Inc., using the Viscous Suspension Spinning Process (VSSP). In this process, fine PZT powder is intimately mixed with polymer precursor by high shear mixing. The powder and precursor mixture is spun through a spinneret into a coagulation bath to form fibers. The fibers are washed, dried, and collected on a spool. Yarns containing between 10 and 500 individual fibers were collimated by applying a polymeric sizing to the yarns, and passing the yarns through sizing dies. Yarn bundle tightness and flexibility were controlled by the sizing chemistry. Continuous green yarns were cut to short lengths, or woven in different architectures to create composites with novel microstructures. The short yarns were fired to product PZT straight rods for `pick and place' piezoelectric composites. The woven structures were heat treated and backfilled with polymer to create composites with 1-3, 2-3, and 3-3 connectivity. After heat treatment, the diameter of the individual PZT fibers was 10 to 20 micrometers . Electromechanical characteristics of a number of composites were determined, and will be reported. The PZT VSSP fibers can be used to form fine-scale, large area piezoelectric fiber/polymer composites for use in hydrophones, transducers for medical ultrasonic imaging and non-destructive evaluation, and as sensors and actuators in vibration and noise control.

  5. Pave Thermal Highway with Self-Organized Nanocrystals in Transparent Polymer Composites.

    Science.gov (United States)

    Mu, Liwen; Ji, Tuo; Chen, Long; Mehra, Nitin; Shi, Yijun; Zhu, Jiahua

    2016-10-03

    Phonon transfer is greatly scattered in traditional polymer composites due to the unpaired phonon frequency at polymer/filler interface. A key innovation of this work is to build continuous crystal network by self-organization and utilize it as "thermal highway" that circumvents the long-existing interfacial thermal barrier issue in traditional composites. By tuning the molecular diffusion rate of dicarboxylic acids (oxalic acid, malonic acid and succinic acid), different crystal structures including skeletal, dendrite, diffusion limited aggregates and spherulite were synthesized in PVA film. These continuous crystal structures benefit the efficient phonon transfer in the composites with minimized interfacial scattering and lead to a significant thermal conductivity enhancement by up to 180% compared to pure polymer. Moreover, the transparent feature of these composite films provides additional benefits in display applications. Post heat treatment effect on the thermal conductivity of the composite films shows a time dependent behavior. These uniquely structured polymer/crystal composites are expected to generate significant impacts in thermal management applications.

  6. Bisphenyl-Polymer/Carbon-Fiber-Reinforced Composite Compared to Titanium Alloy Bone Implant

    Directory of Open Access Journals (Sweden)

    Richard C. Petersen

    2011-01-01

    Full Text Available Aerospace/aeronautical thermoset bisphenyl-polymer/carbon-fiber-reinforced composites are considered as new advanced materials to replace metal bone implants. In addition to well-recognized nonpolar chemistry with related bisphenol-polymer estrogenic factors, carbon-fiber-reinforced composites can offer densities and electrical conductivity/resistivity properties close to bone with strengths much higher than metals on a per-weight basis. In vivo bone-marrow tests with Sprague-Dawley rats revealed far-reaching significant osseoconductivity increases from bisphenyl-polymer/carbon-fiber composites when compared to state-of-the-art titanium-6-4 alloy controls. Midtibial percent bone area measured from the implant surface increased when comparing the titanium alloy to the polymer composite from 10.5% to 41.6% at 0.8 mm, P<10−4, and 19.3% to 77.7% at 0.1 mm, P<10−8. Carbon-fiber fragments planned to occur in the test designs, instead of producing an inflammation, stimulated bone formation and increased bone integration to the implant. In addition, low-thermal polymer processing allows incorporation of minerals and pharmaceuticals for future major tissue-engineering potential.

  7. A testing platform for durability studies of polymers and fiber-reinforced polymer composites under concurrent hygrothermo-mechanical stimuli.

    Science.gov (United States)

    Gomez, Antonio; Pires, Robert; Yambao, Alyssa; La Saponara, Valeria

    2014-12-11

    The durability of polymers and fiber-reinforced polymer composites under service condition is a critical aspect to be addressed for their robust designs and condition-based maintenance. These materials are adopted in a wide range of engineering applications, from aircraft and ship structures, to bridges, wind turbine blades, biomaterials and biomedical implants. Polymers are viscoelastic materials, and their response may be highly nonlinear and thus make it challenging to predict and monitor their in-service performance. The laboratory-scale testing platform presented herein assists the investigation of the influence of concurrent mechanical loadings and environmental conditions on these materials. The platform was designed to be low-cost and user-friendly. Its chemically resistant materials make the platform adaptable to studies of chemical degradation due to in-service exposure to fluids. An example of experiment was conducted at RT on closed-cell polyurethane foam samples loaded with a weight corresponding to ~50% of their ultimate static and dry load. Results show that the testing apparatus is appropriate for these studies. Results also highlight the larger vulnerability of the polymer under concurrent loading, based on the higher mid-point displacements and lower residual failure loads. Recommendations are made for additional improvements to the testing apparatus.

  8. Preparation of Laminin-apatite-polymer Composites Using Metastable Calcium Phosphate Solutions

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    A synthetic polymer with a laminin-apatite composite layer on its surface would be useful as a percutaneous device. The preparation of such a composite was attempted in the present study using poly ( ethylene terephthalate ) (PET) and polyethylene ( PE ) as the synthetic polymer. PET and PE plates and those pretreated with an oxygen plasma were alternately dipped in calcium and phosphate ion solutions, and then immersed in a metastable ealcium phosphate solution supplemented with laminin ( LCP solution ). The PET and PE plates pretreated with an oxygen plasma formed a uniform and continuous layer of a laminin- apatite composite on their surfaces. In contrast, the PET and PE plates that had not been pretreated with an oxygen plasma did not form a continuous layer of a laminin-apatite composite on their surfaces. The hydrophilic functional groups on the PET and PE surfaces introduced by the plasma treatment were responsible for the successful laminin-apatite composite coating.

  9. Symposium Review: Metal and Polymer Matrix Composites at MS&T 2013

    Science.gov (United States)

    Gupta, Nikhil; Paramsothy, Muralidharan

    2014-06-01

    This article reflects on the presentations made during the Metal and Polymer Matrix Composites symposium at Materials Science and Technology 2013 (MS&T'13) held in Montreal (Quebec, Canada) from October 27 to 31. The symposium had three sessions on metal matrix composites and one session on polymer matrix composites containing a total of 23 presentations. While the abstracts and full-text papers are available through databases, the discussion that took place during the symposium is often not captured in writing and gets immediately lost. We have tried to recap some of the discussion in this article and hope that it will supplement the information present in the proceedings. The strong themes in the symposium were porous composites, aluminum matrix composites, and nanocomposites. The development of processing methods was also of interest to the speakers and attendees.

  10. A new polyester based polymer composite for shielding soft gamma rays

    Science.gov (United States)

    Ambika, M. R.; Nagaiah, N.; Suman, S. K.

    2017-05-01

    Finely ground particulate Tungsten Oxide filled Isophthalate Polyester based polymer composites have been fabricated for different concentrations of WO3 using a simple and well established Open mould cast technique. The gamma shielding ability of the composites was studied using a gamma ray spectrometer for 80 & 127 keV gamma rays. The shielding parameters such as linear & mass attenuation coefficients, HVL and relaxation lengths were evaluated. The linear attenuation coefficient is found to increase with increase in the density of the composites. The mass attenuation coefficient ranges from 0.162 - 2.34cm2/gm and 0.15-0.89cm2/gm for 80 & 127keV gamma rays respectively. The shielding ability of the composites increases with increase in the filler wt% and decreases with increase in energy. Thus, the novel lead free, polymer composites perform well as radiation shields and their shielding ability is comparable to lead in performance.

  11. Friction and wear performance of some thermoplastic polymers and polymer composites against unsaturated polyester

    Science.gov (United States)

    Unal, H.; Mimaroglu, A.; Arda, T.

    2006-09-01

    Wear experiments have been carried out with a range of unfilled and filled engineering thermoplastic polymers sliding against a 15% glass fibre reinforced unsaturated polyester polymer under 20, 40 and 60 N loads and 0.5 m/s sliding speed. Pin materials used in this experimental investigation are polyamide 66 (PA 66), poly-ether-ether-ketone (PEEK) and aliphatic polyketone (APK), glass fibre reinforced polyamide 46 (PA 46 + 30% GFR), glass fibre reinforced polytetrafluoroethylene (PTFE + 17% GFR), glass fibre reinforced poly-ether-ether-ketone (PEEK + 20% GFR), glass fibre reinforced poly-phylene-sulfide (PPS + 30% GFR), polytetrafluoroethylene filled polyamide 66 (PA 66 + 10% PTFE) and bronze filled pofytetrafluoroethylene (PTFE + 25% bronze) engineering polymers. The disc material is a 15% glass fibre reinforced unsaturated polyester thermoset polymer produced by Bulk Moulding Compound (BMC). Sliding wear tests were carried out on a pin-on-disc apparatus under 0.5 m/s sliding speed and load values of 20, 40 and 60 N. The results showed that the highest specific wear rate is for PPS + 30% GFR with a value of 1 × 10 -11 m 2/N and the lowest wear rate is for PTFE + 17% GFR with a value of 9.41 × 10 -15 m 2/N. For the materials and test conditions of this investigation, apart from polyamide 66 and PA 46 + 30% GFR polymers, the coefficient of friction and specific wear rates are not significantly affected by the change in load value. For polyamide 66 and PA 46 + 30% GFR polymers the coefficient of friction and specific wear rates vary linearly with the variation in load values.

  12. Role of the polymer phase in the mechanics of nacre-like composites

    Science.gov (United States)

    Niebel, Tobias P.; Bouville, Florian; Kokkinis, Dimitri; Studart, André R.

    2016-11-01

    Although strength and toughness are often mutually exclusive properties in man-made structural materials, nature is full of examples of composite materials that combine these properties in a remarkable way through sophisticated multiscale architectures. Understanding the contributions of the different constituents to the energy dissipating toughening mechanisms active in these natural materials is crucial for the development of strong artificial composites with a high resistance to fracture. Here, we systematically study the influence of the polymer properties on the mechanics of nacre-like composites containing an intermediate fraction of mineral phase (57 vol%). To this end, we infiltrate ceramic scaffolds prepared by magnetically assisted slip casting (MASC) with monomers that are subsequently cured to yield three drastically different polymers: (i) poly(lauryl methacrylate) (PLMA), a soft and weak elastomer; (ii) poly(methyl methacrylate) (PMMA), a strong, stiff and brittle thermoplastic; and (iii) polyether urethane diacrylate-co-poly(2-hydroxyethyl methacrylate) (PUA-PHEMA), a tough polymer of intermediate strength and stiffness. By combining our experimental data with finite element modeling, we find that stiffer polymers can increase the strength of the composite by reducing stress concentrations in the inorganic scaffold. Moreover, infiltrating the scaffolds with tough polymers leads to composites with high crack initiation toughness KIC. An organic phase with a minimum strength and toughness is also required to fully activate the mechanisms programmed within the ceramic structure for a rising R-curve behavior. Our results indicate that a high modulus of toughness is a key parameter for the selection of polymers leading to strong and tough bioinspired nacre-like composites.

  13. Polymer composites and porous materials prepared by thermally induced phase separation and polymer-metal hybrid methods

    Science.gov (United States)

    Yoon, Joonsung

    The primary objective of this research is to investigate the morphological and mechanical properties of composite materials and porous materials prepared by thermally induced phase separation. High melting crystallizable diluents were mixed with polymers so that the phase separation would be induced by the solidification of the diluents upon cooling. Theoretical phase diagrams were calculated using Flory-Huggins solution thermodynamics which show good agreement with the experimental results. Porous materials were prepared by the extraction of the crystallized diluents after cooling the mixtures (hexamethylbenzene/polyethylene and pyrene/polyethylene). Anisotropic structures show strong dependence on the identity of the diluents and the composition of the mixtures. Anisotropic crystal growth of the diluents was studied in terms of thermodynamics and kinetics using DSC, optical microscopy and SEM. Microstructures of the porous materials were explained in terms of supercooling and dendritic solidification. Dual functionality of the crystallizable diluents for composite materials was evaluated using isotactic polypropylene (iPP) and compatible diluents that crystallize upon cooling. The selected diluents form homogeneous mixtures with iPP at high temperature and lower the viscosity (improved processability), which undergo phase separation upon cooling to form solid particles that function as a toughening agent at room temperature. Tensile properties and morphology of the composites showed that organic crystalline particles have the similar effect as rigid particles to increase toughness; de-wetting between the particle and iPP matrix occurs at the early stage of deformation, followed by unhindered plastic flow that consumes significant amount of fracture energy. The effect of the diluents, however, strongly depends on the identity of the diluents that interact with the iPP during solidification step, which was demonstrated by comparing tetrabromobisphenol-A and

  14. Pulsed field magnetization strategies and the field poles composition in a bulk-type superconducting motor

    Science.gov (United States)

    Huang, Zhen; Ruiz, H. S.; Coombs, T. A.

    2017-03-01

    High temperature superconducting (HTS) bulks offer the potential of trapping and maintaining much higher magnetic loading level compared with the conventional permanent magnets used in rotary machines, although the effective magnetization of multiple HTS bulks with different relative orientations over the surface of cylindrical rotors creates new challenges. In this paper, we present the design and numerical validation of the Pulse Field Magnetization (PFM) strategy considered for the magnetization of the four-pole synchronous fully superconducting motor developed at the University of Cambridge. In a first instance, singular columns of up to five HTS bulks aligned over the height of the rotor were subjected to up to three magnetic pulses of 1.5 T peak, and the experimental results have been simulated by considering the electrical and thermal properties of the system in a 2D approach. The entire active surface of the rotor is covered by HTS bulks of approximately the same dimensions, resulting in an uneven distribution of pole areas with at least one of the poles formed by up to 3 columns of magnetized bulks, with relatively the same peaks of trapped magnetic field. Thus, in order to effectively use the entire area of the superconducting rotor, multiple pulsed fields per column have been applied under the same experimental conditions, what results in about three times larger magnetic pole areas but with an average drop on the peaks of trapped magnetic field of about 50%.

  15. Mathematical modeling of chemical composition modification and etching of polymers under the atomic oxygen influence

    Science.gov (United States)

    Chirskaia, Natalia; Novikov, Lev; Voronina, Ekaterina

    2016-07-01

    Atomic oxygen (AO) of the upper atmosphere is one of the most important space factors that can cause degradation of spacecraft surface. In our previous mathematical model the Monte Carlo method and the "large particles" approximation were used for simulating processes of polymer etching under the influence of AO [1]. The interaction of enlarged AO particles with the polymer was described in terms of probabilities of reactions such as etching of polymer and specular and diffuse scattering of the AO particles on polymer. The effects of atomic oxygen on protected polymers and microfiller containing composites were simulated. The simulation results were in quite good agreement with the results of laboratory experiments on magnetoplasmadynamic accelerator of the oxygen plasma of SINP MSU [2]. In this paper we present a new model that describes the reactions of AO interactions with polymeric materials in more detail. Reactions of formation and further emission of chemical compounds such as CO, CO _{2}, H _{2}O, etc. cause the modification of the chemical composition of the polymer and change the probabilities of its consequent interaction with the AO. The simulation results are compared with the results of previous simulation and with the results of laboratory experiments. The reasons for the differences between the results of natural experiments on spacecraft, laboratory experiments and simulations are discussed. N. Chirskaya, M. Samokhina, Computer modeling of polymer structures degradation under the atomic oxygen exposure, WDS'12 Proceedings of Contributed Papers: Part III - Physics, Matfyzpress Prague, 2012, pp. 30-35. E. Voronina, L. Novikov, V. Chernik, N. Chirskaya, K. Vernigorov, G. Bondarenko, and A. Gaidar, Mathematical and experimental simulation of impact of atomic oxygen of the earth's upper atmosphere on nanostructures and polymer composites, Inorganic Materials: Applied Research, 2012, vol. 3, no. 2, pp. 95-101.

  16. Mechanical properties of dispersed ceramic nanoparticles in polymer composites for orthopedic applications

    Directory of Open Access Journals (Sweden)

    Huinan Liu

    2010-04-01

    Full Text Available Huinan Liu, Thomas J WebsterDivision of Engineering, Brown University, Providence, RI, USAAbstract: Ceramic/polymer composites have been considered as third-generation orthopedic biomaterials due to their ability to closely match properties (such as surface, chemistry, biological, and mechanical of natural bone. It has already been shown that the addition of nanophase compared with conventional (or micron-scale ceramics to polymers enhances bone cell functions. However, in order to fully take advantage of the promising nanometer size effects that nanoceramics can provide when added to polymers, it is critical to uniformly disperse them in a polymer matrix. This is critical since ceramic nanoparticles inherently have a strong tendency to form larger agglomerates in a polymer matrix which may compromise their properties. Therefore, in this study, model ceramic nanoparticles, specifically titania and hydroxyapatite (HA, were dispersed in a model polymer (PLGA, poly-lactic-co-glycolic acid using high-power ultrasonic energy. The mechanical properties of the resulting PLGA composites with well-dispersed ceramic (either titania or HA nanoparticles were investigated and compared with composites with agglomerated ceramic nanoparticles. Results demonstrated that well-dispersed ceramic nanoparticles (titania or HA in PLGA improved mechanical properties compared with agglomerated ceramic nanoparticles even though the weight percentage of the ceramics was the same. Specifically, well-dispersed nanoceramics in PLGA enhanced the tensile modulus, tensile strength at yield, ultimate tensile strength, and compressive modulus compared with the more agglomerated nanoceramics in PLGA. In summary, supplemented by previous studies that demonstrated greater osteoblast (bone-forming cell functions on well-dispersed nanophase ceramics in polymers, the present study demonstrated that the combination of PLGA with well-dispersed nanoceramics enhanced mechanical properties

  17. Degradable Polymers and Block Copolymers from Electron-deficient Carbonyl Compounds (STIR) (7.3 Polymer Chemistry - Synthesis: Architecture and Composition)

    Science.gov (United States)

    2015-04-23

    patterned surfaces and in a range of applications as surfactants and drug delivery agents. There are very few synthetic routes to polyacetals that have...deficient Carbonyl Compounds (STIR) (7.3 Polymer Chemistry - Synthesis: Architecture and Composition) The views, opinions and/or findings contained in...Degradable Polymers and Block Copolymers from Electron-deficient Carbonyl Compounds (STIR) (7.3 Polymer Chemistry - Synthesis: Architecture and

  18. Structure and Properties of Polymer Composites and NanocompositesSubjected to Thermomagnetic Treatment

    Directory of Open Access Journals (Sweden)

    A.D. Stadnick

    2015-10-01

    Full Text Available We have investigated the effect of thermomagnetic treatment on the structure and properties of polymer composites based on bisphenol epoxy resin, polyvinylidene fluoride, polyethylene, poly-4-methylpentene-1. The following powders were used as fillers: electrolytic iron, carbonyl nickel and nanocobalt. The values of the melting and crystallization temperature and also the melting (crystallization temperature range are determined. The dependence of the degree of crystallinity, the coercive force and residual magnetization of polymer composites on the concentration of filler and the treatment conditions are established.

  19. Fabrication of mesoporous silica/polymer composites through solvent evaporation process and investigation of their excellent low thermal expansion property.

    Science.gov (United States)

    Suzuki, Norihiro; Kiba, Shosuke; Yamauchi, Yusuke

    2011-03-21

    We fabricate mesoporous silica/epoxy polymer composites through a solvent evaporation process. The easy penetration of the epoxy polymers into mesopores is achieved by using a diluted polymer solution including a volatile organic solvent. After the complete solvent evaporation, around 90% of the mesopores are estimated to be filled with the epoxy polymer chains. Here we carefully investigate the thermal expansion behavior of the obtained mesoporous silica/polymer composites. Thermal mechanical analysis (TMA) charts revealed that coefficient of linear thermal expansion (CTE) gradually decreases, as the amount of the doped mesoporous silica increases. Compared with spherical silica particle without mesopores, mesoporous silica particles show a greater effect on lowering the CTE values. Interestingly, it is found that the CTE values are proportionally decreased with the decrease of the total amount of the polymers outside the mesopores. These data demonstrate that polymers embedded inside the mesopores become thermally stable, and do not greatly contribute to the thermal expansion behavior of the composites.

  20. INTEGRATED COI S200 - Hi-NiCalon FIBER WITH AN S200 MATRIX (POLYMER MATRIX COMPOSITE - PMC) / AETB 1

    Science.gov (United States)

    2003-01-01

    INTEGRATED COI S200 - Hi-NiCalon FIBER WITH AN S200 MATRIX (POLYMER MATRIX COMPOSITE - PMC) / AETB 16 (FOAM CORE) / CARBON REINFORCED CYANOESTER (CERAMIC MATRIX COMPOSITE - CMC) HOT STRUCTURE, PANEL 884-1: SAMPLE 1

  1. Temperature induced transition from acceleration to deceleration of the diffusion of polymers by soft nanoparticles in their composite

    Science.gov (United States)

    Jiao, Gui-Sheng; Qian, Hu-Jun; Lu, Zhong-Yuan

    2017-06-01

    It is well known that the presence of nanoparticles in polymer melt can dramatically influence the dynamics of the polymers. Here from a molecular dynamics simulation study, we find that such influences can be largely temperature dependent in a polymer/single chain nanoparticle composite. At high temperature, the translational diffusion of polymers can be accelerated due to large deformability of nanoparticle surface. While when temperature decreases, nanoparticle surface deformability decreases dramatically and therefore nanoparticles can impose large excess free energy barrier on polymer diffusion. As a consequence, the diffusion of polymers at low temperature can be largely decelerated.

  2. Dynamic response of a polymer and polymer composite systems: Experimental studies

    NARCIS (Netherlands)

    Fan, J.

    2015-01-01

    Recently, research on the impact resistance of transparent hybrid glass-polymer systems (layered and particle-matrix systems) has been conducted at the Netherlands Organisation for Applied Scientific Research (TNO), showing the potential of these materials for the application in protection concepts.

  3. Dynamic response of a polymer and polymer composite systems: Experimental studies

    NARCIS (Netherlands)

    Fan, J.

    2015-01-01

    Recently, research on the impact resistance of transparent hybrid glass-polymer systems (layered and particle-matrix systems) has been conducted at the Netherlands Organisation for Applied Scientific Research (TNO), showing the potential of these materials for the application in protection concepts.

  4. Magnetic and Electric Properties of Magneto polymer Composites

    Directory of Open Access Journals (Sweden)

    Jozef Slama

    2004-01-01

    Full Text Available Permeability spectra of MnZn ferrite composite materials, prepared by mixing ferrite particles with PVC, have been studied. As the ferrite filler content decreases in composite, the quasistatic permeability of the rotation component decreases and relaxation and the resonance frequency shift is higher. The real part of the permeability in the ferrite composite materials becomes larger than of sintered ferrite in high frequency region.

  5. Automated Fabrication Technologies for High Performance Polymer Composites

    Science.gov (United States)

    Shuart , M. J.; Johnston, N. J.; Dexter, H. B.; Marchello, J. M.; Grenoble, R. W.

    1998-01-01

    New fabrication technologies are being exploited for building high graphite-fiber-reinforced composite structure. Stitched fiber preforms and resin film infusion have been successfully demonstrated for large, composite wing structures. Other automatic processes being developed include automated placement of tacky, drapable epoxy towpreg, automated heated head placement of consolidated ribbon/tape, and vacuum-assisted resin transfer molding. These methods have the potential to yield low cost high performance structures by fabricating composite structures to net shape out-of-autoclave.

  6. Microwave absorbing properties of activated carbon fibre polymer composites

    Indian Academy of Sciences (India)

    Tianchun Zou; Naiqin Zhao; Chunsheng Shi; Jiajun Li

    2011-02-01

    Microwave absorption of composites containing activated carbon fibres (ACFs) was investigated. The results show that the absorptivity greatly depends on increasing ACF content in the absorbing layer, first increasing and then decreasing. When the content is 0.76 wt.%, the bandwidth below −10dB is 12.2 GHz. Comparing the absorption characteristics of the ACF composite with one containing unactivated fibres, it is found that carbon fibre activation increases the absorption of the composite.

  7. Physical-Chemical Studies on Rodlike Polymer Compositions

    Science.gov (United States)

    1994-09-20

    Condensation and Commentary of "Shear Rheology and Shear-Induced Textures of a Thermotropic Copolvesteramide" by T. De’N~ve, P. Navard and M. Klman...protonation in the strong protic acid MSA, the absorption properties are different for PBZT in MSA solutions. The absorbance for algined nematic...Lee, C. C., Chu, S. G., and Berry, G. C., I. Polyin. Sci., Polym. Phys. Ed. 1983, 21:1573. 3. Srinivasarao, M., and Berry, G. C.,]. Rheology 1991

  8. Multifunctional Metal/Polymer Composite Fiber for Space Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — In this Small Business Innovation Research Phase I Program, Syscom Technology, Inc. (STI) will fabricate a metallized multifunctional composite fiber from a...

  9. Electrodynamic stabilization conditions for high-temperature superconducting composites with different types of current-voltage characteristic nonlinearity

    Science.gov (United States)

    Arkharov, A. M.; Lavrov, N. A.; Romanovskii, V. R.

    2014-06-01

    The current instability is studied in high-temperature superconducting current-carrying elements with I- V characteristics described by power or exponential equations. Stability analysis of the macroscopic states is carried out in terms of a stationary zero-dimensional model. In linear temperature approximation criteria are derived that allow one to find the maximum allowable values of the induced current, induced electric field intensity, and overheating of the superconductor. A condition is formulated for the complete thermal stabilization of the superconducting composite with regard to the nonlinearity of its I- V characteristic. It is shown that both subcritical and supercritical stable states may arise. In the latter case, the current and electric field intensity are higher than the preset critical parameters of the superconductor. Conditions for these states depending on the properties of the matrix, superconductor's critical current, fill factor, and nonlinearity of the I- V characteristic are discussed. The obtained results considerably augment the class of allowable states for high-temperature superconductors: it is demonstrated that there exist stable resistive conditions from which superconductors cannot pass to the normal state even if the parameters of these conditions are supercritical.

  10. Tethered Nanoparticle -Polymer Composites: Phase behavior and rheology

    Science.gov (United States)

    Mangal, Rahul; Archer, Lynden A.

    2014-03-01

    Polymer nanocomposites with particle radius (a) approaching the radius of gyration (Rg) of entangled host polymer have been reported to exhibit an unusual negative reinforcement effect, which leads to an anomalous reduction in relative an anomalous reduction in relative viscosity at low particle loadings (φ) . This so-called Non-Einsteinian flow behavior is understood to be sensitive to the dispersion state of particles in host polymer. We studied suspensions of SiO2 nanoparticles tethered with polethylene glycol (PEG) in polymethylmethacralate (PMMA) with molecular weights (Mw) from 17 KDa to 280 KDa. Due to strong enthalpic interactions between PEG and PMMA (χ = -0.65), nanoparticles are expected to be well-dispersed, independent of Mw of PMMA. Using small angle x-ray scattering measurements we show that the phase stability of suspensions depends on Mw of the tethered PEG, host PMMA, and φ. Particles functionalized with low molecular weight PEG aggregate at low φ, but disperse at high φ. In contrast, nanoparticles functionalized with higher molecular weight PEG are well dispersed for host chain lengths (P) to tethered chain length (N), (P/N), is as high as 160. The stability boundary of these suspensions extends well beyond expectations for nanocomposites based on tethered PEG chains suspended in PEG. Through in-depth analysis of rheology and x-ray photon correlation spectra we explore the fundamental origins of non-Einsteinian flow behavior. King Abdullah University of Science and Technology (KAUST), Advanced Photon Source (APS).

  11. Polystyrene-Al2O3 composite solid polymer electrolyte for lithium secondary battery

    Science.gov (United States)

    Lim, Yu-Jeong; An, Yu-Ha; Jo, Nam-Ju

    2012-01-01

    In a common salt-in-polymer electrolyte, a polymer which has polar groups in the molecular chain is necessary because the polar groups dissolve lithium salt and coordinate cations. Based on the above point of view, polystyrene [PS] that has nonpolar groups is not suitable for the polymer matrix. However, in this PS-based composite polymer-in-salt system, the transport of cations is not by segmental motion but by ion-hopping through a lithium percolation path made of high content lithium salt. Moreover, Al2O3 can dissolve salt, instead of polar groups of polymer matrix, by the Lewis acid-base interactions between the surface group of Al2O3 and salt. Notably, the maximum enhancement of ionic conductivity is found in acidic Al2O3 compared with neutral and basic Al2O3 arising from the increase of free ion fraction by dissociation of salt. It was revealed that PS-Al2O3 composite solid polymer electrolyte containing 70 wt.% salt and 10 wt.% acidic Al2O3 showed the highest ionic conductivity of 9.78 × 10-5 Scm-1 at room temperature.

  12. Properties of Multifunctional Hybrid Carbon Nanotube/Carbon Fiber Polymer Matrix Composites

    Science.gov (United States)

    Cano, Roberto J.; Kang, Jin Ho; Grimsley, Brian W.; Ratcliffe, James G.; Siochi, Emilie J.

    2016-01-01

    For aircraft primary structures, carbon fiber reinforced polymer (CFRP) composites possess many advantages over conventional aluminum alloys due to their light weight, higher strength- and stiffness-to-weight ratios, and low life-cycle maintenance costs. However, the relatively low electrical and thermal conductivities of CFRP composites fail to provide structural safety in certain operational conditions such as lightning strikes. Carbon nanotubes (CNT) offer the potential to enhance the multi-functionality of composites with improved thermal and electrical conductivity. In this study, hybrid CNT/carbon fiber (CF) polymer composites were fabricated by interleaving layers of CNT sheets with Hexcel® IM7/8852 prepreg. Resin concentrations from 1 wt% to 50 wt% were used to infuse the CNT sheets prior to composite fabrication. The interlaminar properties of the resulting hybrid composites were characterized by mode I and II fracture toughness testing. Fractographical analysis was performed to study the effect of resin concentration. In addition, multi-directional physical properties like thermal conductivity of the orthotropic hybrid polymer composite were evaluated.

  13. Development of ammonia sensors by using conductive polymer/hydroxyapatite composite materials.

    Science.gov (United States)

    Huixia, Li; Yong, Liu; Lanlan, Luo; Yanni, Tan; Qing, Zhang; Kun, Li

    2016-02-01

    In order to improve the gas sensing properties, hydroxyapatite (HAp)-based composites were prepared by mixing with different contents of conductive polymers: polypyrrole (PPy) and polyaniline (PAni). The compositions, microstructures and phase constitutions of polymer/HAp composites were characterized, and the sensing properties were studied using a chemical gas sensing (CGS-8) system. The results showed that, compared to pure HAp, the sensitivities of the composites to ammonia were improved significantly. 5%PPy/HAp and 20%PAni/HAp composites exhibited the best sensitivities to ammonia, and the sensitivities at 500ppm were 86.72% and 86.18%, respectively. Besides, the sensitivity of 5%PPy/HAp at 1000ppm was up to 90.7%. Compared to pure PPy and PAni, the response and the recovery time of 5%PPy/HAp and 20%PAni/HAp at 200ppm were shortened several times, and they were 24s/245s and 15s/54s, respectively. In addition, the composites showed a very high selectivity to ammonia. The mechanism for the enhancement of the sensitivity to ammonia was also discussed. The polymer/HAp composites are very promising in applications of ammonia sensors.

  14. Preparation, Characterization and Application of Mg(OH2-PAM Inorganic-Organic Composite Polymer in Removing Reactive Dye

    Directory of Open Access Journals (Sweden)

    Khai Ern Lee

    2012-01-01

    Full Text Available In this study, a series of inorganic-organic composite polymer was prepared. Magnesium hydroxide and polyacrylamide was composed in a composite matrix to prepare Mg(OH2-PAM (MHPAM inorganic-organic composite polymer. The characteristics of MHPAM inorganic-organic composite polymer was investigated in terms of chemical, physical, physical, thermal and morphological properties through FT-IR, conductivity, intrinsic viscosity, TGA and TEM, respectively. Results showed that the properties of MHPAM composite polymers varied with the compositions in the composite polymers. Different compositions of MHPAM inorganic-organic composite polymers were applied in removing reactive dye from aqueous solution. MHPAM inorganic-organic composite polymer with Mg(OH2 : PAM ratio of 90 : 10 gave the best dye removal (% where it was able to remove 98% of reactive dye at pH 11.00 with a dosage of 500 mg/L. Kinetics study was carried out using different dye concentration and it was found that the experimental data fitted the pseudo-second-order model better compared to pseudo-first-order model.

  15. Dielectric properties of electrospun titanium compound/polymer composite nanofibres

    Science.gov (United States)

    Li, Meng-Meng; Long, Yun-Ze; Tan, Jin-Shan; Yin, Hong-Xing; Sui, Wan-Mei; Zhang, Zhi-Ming

    2010-02-01

    Poly(vinylpyrrolidone)/tetrabutyl titanate (PVP/ [CH3(CH2)3O]4Ti) composite nanofibres are prepared by electrospinning. After calcining parts of composite nanofibres in air at 700 °C, petal-like TiO2 nanostructures are obtained. The characterizations of composite nanofibres and TiO2 nanostructures are carried out by a scanning electron microscope, an x-ray diffractometer, and an infrared spectrometer. Electrospun nanofibres are pressed into pellets under different pressures in order to explore their dielectric properties. It is found that the dielectric constants decrease with frequency increasing. The dielectric constant of the composite nanofibre pellet increases whereas its dielectric loss tangent decreases due to the doped titanium ions compared with those of pure PVP nanofibre pellets. In addition, it is observed that the dielectric constant of the composite nanofibre pellet decreases with the increase of the pressure applied in pelletization.

  16. Influence of Carbon & Glass Fiber Reinforcements on Flexural Strength of Epoxy Matrix Polymer Hybrid Composites

    Directory of Open Access Journals (Sweden)

    T.D. Jagannatha

    2015-04-01

    Full Text Available Hybrid composite materials are more attracted by the engineers because of their properties like stiffness and high specific strength which leads to the potential application in the area of aerospace, marine and automobile sectors. In the present investigation, the flexural strength and flexural modulus of carbon and glass fibers reinforced epoxy hybrid composites were studied. The vacuum bagging technique was adopted for the fabrication of polymer hybrid composite materials. The hardness, flexural strength and flexural modulus of the hybrid composites were determined as per ASTM standards. The hardness, flexural strength and flexural modulus were improved as the fiber reinforcement contents increased in the epoxy matrix material.

  17. Mechanical, Thermomechanical and Reprocessing Behavior of Green Composites from Biodegradable Polymer and Wood Flour

    Directory of Open Access Journals (Sweden)

    Marco Morreale

    2015-11-01

    Full Text Available The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of reprocessing on the matrix properties, wood flour loading effects on virgin and reprocessed biopolymer, and wood flour effects on material reprocessability. Tensile, Dynamic-mechanical thermal (DMTA, differential scanning calorimetry (DSC and creep tests were performed, pointing out that wood flour leads to an improvement of rigidity and creep resistance in comparison to the pristine polymer, without compromising other properties such as the tensile strength. The biopolymer also showed a good resistance to multiple reprocessing; the latter even allowed for improving some properties of the obtained green composites.

  18. Mechanical, Thermomechanical and Reprocessing Behavior of Green Composites from Biodegradable Polymer and Wood Flour.

    Science.gov (United States)

    Morreale, Marco; Liga, Antonio; Mistretta, Maria Chiara; Ascione, Laura; Mantia, Francesco Paolo La

    2015-11-11

    The rising concerns in terms of environmental protection and the search for more versatile polymer-based materials have led to an increasing interest in the use of polymer composites filled with natural organic fillers (biodegradable and/or coming from renewable resources) as a replacement for traditional mineral inorganic fillers. At the same time, the recycling of polymers is still of fundamental importance in order to optimize the utilization of available resources, reducing the environmental impact related to the life cycle of polymer-based items. Green composites from biopolymer matrix and wood flour were prepared and the investigation focused on several issues, such as the effect of reprocessing on the matrix properties, wood flour loading effects on virgin and reprocessed biopolymer, and wood flour effects on material reprocessability. Tensile, Dynamic-mechanical thermal (DMTA), differential scanning calorimetry (DSC) and creep tests were performed, pointing out that wood flour leads to an improvement of rigidity and creep resistance in comparison to the pristine polymer, without compromising other properties such as the tensile strength. The biopolymer also showed a good resistance to multiple reprocessing; the latter even allowed for improving some properties of the obtained green composites.

  19. 25th anniversary article: polymer-particle composites: phase stability and applications in electrochemical energy storage.

    Science.gov (United States)

    Srivastava, Samanvaya; Schaefer, Jennifer L; Yang, Zichao; Tu, Zhengyuan; Archer, Lynden A

    2014-01-15

    Polymer-particle composites are used in virtually every field of technology. When the particles approach nanometer dimensions, large interfacial regions are created. In favorable situations, the spatial distribution of these interfaces can be controlled to create new hybrid materials with physical and transport properties inaccessible in their constituents or poorly prepared mixtures. This review surveys progress in the last decade in understanding phase behavior, structure, and properties of nanoparticle-polymer composites. The review takes a decidedly polymers perspective and explores how physical and chemical approaches may be employed to create hybrids with controlled distribution of particles. Applications are studied in two contexts of contemporary interest: battery electrolytes and electrodes. In the former, the role of dispersed and aggregated particles on ion-transport is considered. In the latter, the polymer is employed in such small quantities that it has been historically given titles such as binder and carbon precursor that underscore its perceived secondary role. Considering the myriad functions the binder plays in an electrode, it is surprising that highly filled composites have not received more attention. Opportunities in this and related areas are highlighted where recent advances in synthesis and polymer science are inspiring new approaches, and where newcomers to the field could make important contributions.

  20. New Meta Nanomaterials Extension II of Optical Enhancement and Photorefractive Two-Beam Coupling - Synthesis and Fabrication of Quantum Dot NLO Polymer Composites

    Science.gov (United States)

    2015-07-09

    of CdS(MPS) are not affecting the spectrum of the composite. Both polymer and composite absorb at 423 nm(Figure 8);only a slight baseline is...of fluorescent quantum dot- polymer nanocomposites via frontal polymerization . Journal of Polymer Science Part A: Polymer Chemistry2010, 48, 2170. [2...of Quantum Dot NLO Polymer Composites Ronald Ziolo CIQA Final Report 07/09/2015 DISTRIBUTION A: Distribution approved for public release. AF Office

  1. Plasmon assisted synthesis of highly fluorescing silver quantum cluster/polymer composites for biochemical sensing

    DEFF Research Database (Denmark)

    Bernard, S.; Kutter, J. P.; Mogensen, K. B.

    2014-01-01

    has not been presented before. This should allow highly localized fabrication of porous polymers that are defined by the location of the nanoplasmonic metal film. Silver quantum clusters (AgQCs) consisting of 2-10 atoms can be highly fluorescing in the visible wavelength range and possess a greater......Plasmonics is combined with polymer synthesis for rapid fabrication of highly fluorescing silver quantum cluster/polymer composites inside microfluidic channels. UV-light assisted synthesis of polymers has been investigated by a number of groups previously [1], however, plasmon assisted synthesis...... photostability than organic fluorophores [2]. In this work AgQCs are embedded into the oligoaniline porous matrix and is tested for indirect fluorescence detection of cyanide in a simple microfluidic device (Fig. 1). Imaging of individual silver clusters inside the channel (Fig. 1) is made possible by using 100x...

  2. Influence of carbon nanoparticles on the properties of screen printed polymer composites

    Science.gov (United States)

    Jakubowska, Małgorzata; Janeczek, Kamil; MłoŻniak, Anna; Kozioł, GraŻyna; Araźna, Aneta

    2013-07-01

    Further development of printed electronics requires investigations of new polymer composites which can be coated on flexible substrates with printing techniques. These composites should exhibit low sheet resistance and high durability to thermal stresses. In this article, the properties of polymer composites prepared by mixing a commercial solution of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) in aliphatic hydrocarbons with multi-wall carbon nanotubes or graphite platelet nanofibers were described. These composites were coated on flexible and low-cost substrates with screen printing techniques. The microstructure of fabricated layers were observed in a top and cross-sectional view and their thickness was measured with a contact profilometer. Their resistance was measured with a four-point-probe method depending on a printing multiplicity and after exposure the tested samples to the influence of temperature variation. Temperature distribution under influence of current flow in the produced layers was also examined.

  3. Metacomposite characteristics and their influential factors of polymer composites containing orthogonal ferromagnetic microwire arrays

    Science.gov (United States)

    Luo, Y.; Peng, H. X.; Qin, F. X.; Ipatov, M.; Zhukova, V.; Zhukov, A.; Gonzalez, J.

    2014-05-01

    The microwave properties of glass-fibers reinforced polymer composite embedded with an orthogonal array of Fe77Si10B10C3 microwires have been investigated. The composites containing orthogonal wire arrays display a remarkable transmission window in the frequency band of 1 to 6 GHz under zero external magnetic field indicating an intrinsic double-negative-index characteristic. The polymer matrices have proved to exert a synergistic effect on the microwave properties, which is responsible for the disappearance of the transmission windows when Ek is perpendicular to the glass fiber direction. The plasma frequency of the orthogonal microwire array composite is higher than that of the parallel microwire array with identical wire spacing; this could be attributed to the enhanced microwire-wave interaction induced by the axial electrical components on the additional layer of perpendicular wires. All these features make this new kind of orthogonal microwire composites promising for potential cloaking and sensing applications.

  4. Design, fabrication and characterization of an arrayable all-polymer microfluidic valve employing highly magnetic rare-earth composite polymer

    Science.gov (United States)

    Rahbar, Mona; Shannon, Lesley; Gray, Bonnie L.

    2016-05-01

    We present a new magnetically actuated microfluidic valve that employs a highly magnetic composite polymer (M-CP) containing rare-earth hard-magnetic powder for its actuating element and for its valve seat. The M-CP offers much higher magnetization compared to the soft-magnetic, ferrite-based composite polymers typically used in microfluidic applications. Each valve consists of a permanently magnetized M-CP flap and valve seat mounted on a microfluidic channel system fabricated in poly(dimethylsiloxane) (PDMS). Each valve is actuated under a relatively small external magnetic field of 80 mT provided by a small permanent magnet mounted on a miniature linear actuator. The performance of the valve with different flap thicknesses is characterized. In addition, the effect of the magnetic valve seat on the valve’s performance is also characterized. It is experimentally shown that a valve with a 2.3 mm flap thickness, actuated under an 80 mT magnetic field, is capable of completely blocking liquid flow at a flow rate of 1 ml min-1 for pressures up to 9.65 kPa in microfluidic channels 200 μm wide and 200 μm deep. The valve can also be fabricated into an array for flow switching between multiple microfluidic channels under continuous flow conditions. The performance of arrays of valves for flow routing is demonstrated for flow rates up to 5 ml min-1 with larger microfluidic channels of up to 1 mm wide and 500 μm deep. The design of the valves is compatible with other commonly used polymeric microfluidic components, as well as other components that use the same novel permanently magnetic composite polymer, such as our previously reported cilia-based mixing devices.

  5. Graphene-based polymer nanocomposites in electronics

    CERN Document Server

    Sadasivuni, Kishor Kumar; Kim, Jaehwan

    2015-01-01

    This book covers graphene reinforced polymers, which are useful in electronic applications, including electrically conductive thermoplastics composites, thermosets and elastomers. It systematically introduces the reader to fundamental aspects and leads over to actual applications, such as sensor fabrication, electromagnetic interference shielding, optoelectronics, superconductivity, or memory chips. The book also describes dielectric and thermal behaviour of graphene polymer composites - properties which are essential to consider for the fabrication and production of these new electronic materials. The contributions in this book critically discuss the actual questions in the development and applications of graphene polymer composites. It will thus appeal to chemists, physicists, materials scientists as well as nano technologists, who are interested in the properties of graphene polymer composites.

  6. Energy transfer (In3+ → Eu3+) based Polyvinyl Alcohol polymer composites for bright red luminescence

    Science.gov (United States)

    Kumar, K. Naveen; Vijayalakshmi, L.; Kim, Jong Su; Shim, Jaesool; Cho, Migyung; Kang, Misook; Gupta, Bipin Kumar

    2017-08-01

    A prominent sensitization effect of In3+ ions is observed in In3++Eu3+: PVA polymer composites under UV excitation. Consequently, it enhances the red emission performance of Eu3+ ions in PVA system. We have successfully synthesized Eu3+: PVA, In3+: PVA and In3++Eu3+: PVA polymer films by traditional solution casting method. The structural and ion-polymer interaction studies have been analyzed from XRD and FTIR spectral profiles. Eu3+ doped PVA polymer composites are exhibited a red emission at 619 nm (5D0→7F2) under 396 nm (7F0→5L6) of excitation. Upon co-doping with In3+ ions in different concentrations to the Eu3+: PVA polymer film, it exhibits predominant red emission than singly doped Eu3+: PVA under 396 nm of excitation due to energy migration from In3+ to Eu3+. Successful emission photons of In3+ ions are collectively absorbed by the Eu3+ ions which lead the improvement of red emission. Optimized sensitization concentration of the In3+ ions has been found to be 0.01 wt%. Possible energy migration phenomenon is elucidated by several fluorescent dynamics. The energy transfer process is substantiated by lifetime decay analysis and overlapped spectral studies. The Commission International de I-Eclairage chromaticity coordinates were calculated. The quantum efficiencies of the Eu3+ ions and In3+ ions in singly doped and co-doped polymer systems have been evaluated. From these results, these co-doped In3++Eu3+: PVA composite polymer films might be proposed as encouraging candidates for bright red fluorescent materials for several photonic applications.

  7. Mechanical properties of dispersed ceramic nanoparticles in polymer composites for orthopedic applications.

    Science.gov (United States)

    Liu, Huinan; Webster, Thomas J

    2010-04-15

    Ceramic/polymer composites have been considered as third-generation orthopedic biomaterials due to their ability to closely match properties (such as surface, chemistry, biological, and mechanical) of natural bone. It has already been shown that the addition of nanophase compared with conventional (or micron-scale) ceramics to polymers enhances bone cell functions. However, in order to fully take advantage of the promising nanometer size effects that nanoceramics can provide when added to polymers, it is critical to uniformly disperse them in a polymer matrix. This is critical since ceramic nanoparticles inherently have a strong tendency to form larger agglomerates in a polymer matrix which may compromise their properties. Therefore, in this study, model ceramic nanoparticles, specifically titania and hydroxyapatite (HA), were dispersed in a model polymer (PLGA, poly-lactic-co-glycolic acid) using high-power ultrasonic energy. The mechanical properties of the resulting PLGA composites with well-dispersed ceramic (either titania or HA) nanoparticles were investigated and compared with composites with agglomerated ceramic nanoparticles. Results demonstrated that well-dispersed ceramic nanoparticles (titania or HA) in PLGA improved mechanical properties compared with agglomerated ceramic nanoparticles even though the weight percentage of the ceramics was the same. Specifically, well-dispersed nanoceramics in PLGA enhanced the tensile modulus, tensile strength at yield, ultimate tensile strength, and compressive modulus compared with the more agglomerated nanoceramics in PLGA. In summary, supplemented by previous studies that demonstrated greater osteoblast (bone-forming cell) functions on well-dispersed nanophase ceramics in polymers, the present study demonstrated that the combination of PLGA with well-dispersed nanoceramics enhanced mechanical properties necessary for load-bearing orthopedic/dental applications.

  8. PREPARATION AND CHARACTERIZATION OF COMPOSITES COMPRISING MODIFIED HARDWOOD AND WOOD POLYMERS/POLY(VINYL CHLORIDE

    Directory of Open Access Journals (Sweden)

    Ruxanda Bodîrlău

    Full Text Available Chemical modification of hardwood sawdust from ash-tree species was carried out with a solution of maleic anhydride in acetone. Wood polymers, lignin, and cellulose were isolated from the wood sawdust and modified by the same method. Samples were characterized by Fourier transform infrared spectroscopy (FTIR, providing evidence that maleic anhydride esterifies the free hydroxyl groups of the wood polymer components. Composites comprising chemically modified wood sawdust and wood polymers (cellulose, lignin-as variable weight percentages-, and poly (vinyl chloride were obtained and further characterized by using FTIR spectroscopy and scanning electron microscopy (SEM. The thermal behavior of composites was investigated by using the thermogravimetric analysis (TGA. In all cases, thermal properties were affected by fillers addition.

  9. Photorefractive Effect in a CdS Nanoparticles-sensitized Polymer Composite

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The photorefractive (PR) performance of an organic/inorganic hybrid polymer composite sensitized by CdS nanoparticles, combining poly(N-vinylcarbazole) (PVK), the second-order optically nonlinear chromophore 1-n-butoxy-2-methyl-(4-p-nitropheylazo)benzene (BMNPAB) and 9-ethylcarbazole (ECZ)was studied. It was confirmed that the CdS colloidal particles had a nanoscale size and quantum confinement effect adopting transmission electron microscopy and UV-Vis absorption spectroscopy. The addition of CdS nanoparticles as a photosensitizer in PVK will be significant enhancement of photoconductivity because of the high photocharge generation quantum efficiency and high charge transport to conducting polymer. The polymer composite film exhibited PR effect with a method of two-beam coupling experiment. And an asymmetric two beam coupling gain of 45.8 cm-1 without applied electric filed is obtained at 632.8 nm wavelength.

  10. Polymer-based composites for aerospace: An overview of IMAST results

    Science.gov (United States)

    Milella, Eva; Cammarano, Aniello

    2016-05-01

    This paper gives an overview of technological results, achieved by IMAST, the Technological Cluster on Engineering of Polymeric Composite Materials and Structures, in the completed Research Projects in the aerospace field. In this sector, the Cluster developed different solutions: lightweight multifunctional fiber-reinforced polymer composites for aeronautic structures, advanced manufacturing processes (for the optimization of energy consumption and waste reduction) and multifunctional components (e.g., thermal, electrical, acoustic and fire resistance).

  11. A conference on polymer composites: Infrastructure renewal and economic development

    Energy Technology Data Exchange (ETDEWEB)

    Creese, R.C.; GangaRao, H. (eds.)

    1999-01-01

    Infrastructure Renewal and Economic Development identifies new applications of composites in areas that include: mining operations; civil infrastructure and its renewal (highways, bridges, sewers and water pipes); offshore exploration and off-shore dwellings; and power transmission. The papers in this new volume assess these areas' critical needs, delineate how composites meet these needs, estimate economic development that could result, explore the technical and regulatory barriers to progress, and identify agencies capable of enabling composite use expansion in infrastructure renewal. They also identify the materials and processes most relevant to infrastructure renewal, and discuss product and process improvements as well as specifications and standardization.

  12. SERIAL SECTIONS THROUGH A CONTINUOUS FIBER-REINFORCED POLYMER COMPOSITE

    Directory of Open Access Journals (Sweden)

    Laurent Bizet

    2011-05-01

    Full Text Available The microstructure of a unidirectional glass-fiber composite material is described seeking especially for the influence of the stitching perpendicular to the reinforcement. Serial cuts are performed through the composite and the microstructure is quantified using global parameters and linear morphological analysis. A key result is that the stitching induces variations in fibers spacing within the yarns and in the matrix volume between the yarns. This can affect noticeably the flow of the resin during the manufacturing process and also the mechanical properties of the composite.

  13. Zinc Oxide Nanowire Interphase for Enhanced Lightweight Polymer Fiber Composites

    Science.gov (United States)

    Sodano, Henry A.; Brett, Robert

    2011-01-01

    The objective of this work was to increase the interfacial strength between aramid fiber and epoxy matrix. This was achieved by functionalizing the aramid fiber followed by growth of a layer of ZnO nanowires on the fiber surface such that when embedded into the polymer, the load transfer and bonding area could be substantially enhanced. The functionalization procedure developed here created functional carboxylic acid surface groups that chemically interact with the ZnO and thus greatly enhance the strength of the interface between the fiber and the ZnO.

  14. Multifunctional Polymers and Composites for Self-Healing Applications

    Science.gov (United States)

    2006-09-30

    cured with 12 pph Ancamine® DETA (Air Products). Because the crack is directed along the centerline of the specimens, only the material near the...observed response of LFPs 6 and 7 (Figure 2.6). Second, PEG polymer of MW 43 kDa, which contained no linker, was subjected to the same conditions as...of PEG with MW 5, 10, 20, 26, and 60 kDa was also examined. In this case, the UV/RI ratio of the unbroken chains3 is independent of MW. As a second

  15. Effects of moisture on glass fiber-reinforced polymer composites

    DEFF Research Database (Denmark)

    Alzamora Guzman, Vladimir Joel; Brøndsted, Povl

    2015-01-01

    performance of wind turbine blades over their lifetime. Here, environmental moisture conditions were simulated by immersing glass fiber-reinforced polymer specimens in salt water for a period of up to 8 years. The mechanical properties of specimens were analyzed before and after immersion to evaluate...... the degradation mechanisms. Single-fiber tensile testing was also performed at different moisture conditions. The water-diffusion mechanism was studied to quantify the diffusion coefficients as a function of salt concentration, sample geometry, and fiber direction. Three degradation mechanisms were observed...

  16. Low-temperature oxidizing plasma surface modification and composite polymer thin-film fabrication techniques for tailoring the composition and behavior of polymer surfaces

    Science.gov (United States)

    Tompkins, Brendan D.

    This dissertation examines methods for modifying the composition and behavior of polymer material surfaces. This is accomplished using (1) low-temperature low-density oxidizing plasmas to etch and implant new functionality on polymers, and (2) plasma enhanced chemical vapor deposition (PECVD) techniques to fabricate composite polymer materials. Emphases are placed on the structure of modified polymer surfaces, the evolution of polymer surfaces after treatment, and the species responsible for modifying polymers during plasma processing. H2O vapor plasma modification of high-density polyethylene (HDPE), low-density polyethylene (LDPE), polypropylene (PP), polystyrene (PS), polycarbonate (PC), and 75A polyurethane (PU) was examined to further our understanding of polymer surface reorganization leading to hydrophobic recovery. Water contact angles (wCA) measurements showed that PP and PS were the most susceptible to hydrophobic recovery, while PC and HDPE were the most stable. X-ray photoelectron spectroscopy (XPS) revealed a significant quantity of polar functional groups on the surface of all treated polymer samples. Shifts in the C1s binding energies (BE) with sample age were measured on PP and PS, revealing that surface reorganization was responsible for hydrophobic recovery on these materials. Differential scanning calorimetry (DSC) was used to rule out the intrinsic thermal properties as the cause of reorganization and hydrophobic recovery on HDPE, LDPE, and PP. The different contributions that polymer cross-linking and chain scission mechanisms make to polymer aging effects are considered. The H2O plasma treatment technique was extended to the modification of 0.2 microm and 3.0 microm track-etched polycarbonate (PC-TE) and track-etched polyethylene terephthalate (PET-TE) membranes with the goal of permanently increasing the hydrophilicity of the membrane surfaces. Contact angle measurements on freshly treated and aged samples confirmed the wettability of the

  17. Experimental data on the properties of natural fiber particle reinforced polymer composite material

    Directory of Open Access Journals (Sweden)

    D. Chandramohan

    2017-08-01

    Full Text Available This paper presents an experimental study on the development of polymer bio-composites. The powdered coconut shell, walnut shells and Rice husk are used as reinforcements with bio epoxy resin to form hybrid composite specimens. The fiber compositions in each specimen are 1:1 while the resin and hardener composition 10:1 respectively. The fabricated composites were tested as per ASTM standards to evaluate mechanical properties such as tensile strength, flexural strength, shear strength and impact strength are evaluated in both with moisture and without moisture. The result of test shows that hybrid composite has far better properties than single fibre glass reinforced composite under mechanical loads. However it is found that the incorporation of walnut shell and coconut shell fibre can improve the properties.

  18. A Flexible UV-Vis-NIR Photodetector based on a Perovskite/Conjugated-Polymer Composite.

    Science.gov (United States)

    Chen, Shan; Teng, Changjiu; Zhang, Miao; Li, Yingru; Xie, Dan; Shi, Gaoquan

    2016-07-01

    A lateral photodetector based on the bilayer composite film of a perovskite and a conjugated polymer is reported. It exhibits significantly enhanced responsivity in the UV-vis region and sensitive photoresponse in the near-IR (NIR) region at a low applied voltage. This broadband photodetector also shows excellent mechanical flexibility and improved environmental stability.

  19. Biodegradation of New Polymer Foundry Binders for the Example of the Composition Polyacrylic Acid/Starch

    Directory of Open Access Journals (Sweden)

    Beata Grabowska

    2011-04-01

    Full Text Available The investigations on the biodegradation process pathway of the new polymer binders for the example of water soluble compositionpolyacrylic acid/starch are presented in the hereby paper. Degradation was carried out in water environment and in a soil. Thedetermination of the total oxidation biodegradation in water environment was performed under laboratory conditions in accordance with the static water test system (Zahn-Wellens method, in which the mixture undergoing biodecomposition contained inorganic nutrient,activated sludge and the polymer composition, as the only carbon and energy source. The biodecomposition progress of the polymercomposition sample in water environment was estimated on the basis of the chemical oxygen demand (COD measurements and thedetermination the biodegradation degree, Rt, during the test. These investigations indicated that the composition polyacrylic acid/starchconstitutes the fully biodegradable material in water environment. The biodegradation degree Rt determined in the last 29th day of the test duration achieved 65%, which means that the investigated polymer composition can be considered to be fully biodegradable.During the 6 months biodegradation process of the cross-linked sample of the polymer composition in a garden soil several analysis ofsurface and structural changes, resulting from the sample decomposition, were performed. Those were: thermal analyses (TG-DSC,structural analyses (Raman spectroscopy and microscopic analyses (optical microscopy, AFM.

  20. Piezoelectric and dielectric properties of polymer-ceramic composites for sensors

    NARCIS (Netherlands)

    James, N.K.

    2015-01-01

    The main objective of this PhD thesis is to develop new routes and concepts for manufacturing piezoelectric ceramic-polymer composites with adequate piezoelectric properties while retaining ease of manufacturing and mechanical flexibility and explore new possibilities to maximize especially the volt