Evaluation of Underwater Adhesives and Friction Coatings for In Situ Attachment of Fiber Optic Sensor System for Subsea Applications

Science.gov (United States)

Tang, Henry H.; Le, Suy Q.; Orndoff, Evelyne S.; Smith, Frederick D.; Tapia, Alma S.; Brower, David V.

2012-01-01

Integrity and performance monitoring of subsea pipelines and structures provides critical information for managing offshore oil and gas production operation and preventing environmentally damaging and costly catastrophic failure. Currently pipeline monitoring devices require ground assembly and installation prior to the underwater deployment of the pipeline. A monitoring device that could be installed in situ on the operating underwater structures could enhance the productivity and improve the safety of current offshore operation. Through a Space Act Agreement (SAA) between the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) and Astro Technology, Inc. (ATI), JSC provides technical expertise and testing facilities to support the development of fiber optic sensor technologies by ATI. This paper details the first collaboration effort between NASA JSC and ATI in evaluating underwater applicable adhesives and friction coatings for attaching fiber optic sensor system to subsea pipeline. A market survey was conducted to examine different commercial ]off ]the ]shelf (COTS) underwater adhesive systems and to select adhesive candidates for testing and evaluation. Four COTS epoxy based underwater adhesives were selected and evaluated. The adhesives were applied and cured in simulated seawater conditions and then evaluated for application characteristics and adhesive strength. The adhesive that demonstrated the best underwater application characteristics and highest adhesive strength were identified for further evaluation in developing an attachment system that could be deployed in the harsh subsea environment. Various friction coatings were also tested in this study to measure their shear strengths for a mechanical clamping design concept for attaching fiber optic sensor system. A COTS carbide alloy coating was found to increase the shear strength of metal to metal clamping interface by up to 46 percent. This study provides valuable data for

New technology of subsea and offshore compressor

Energy Technology Data Exchange (ETDEWEB)

Almasi, Amin

2012-09-15

Subsea compressor is a hot topic. Subsea compressor offers tremendous potentials, but also some obstacles. Active magnetic bearings installed inside the process gas allow the elimination of lubrication and seal systems. High-speed permanent- magnet motor directly drives centrifugal compressor to meet optimum speed, eliminating gear box. This design offers inherent machinery health monitoring features and very compact and reliable train. New technology of hermitically sealed direct drive centrifugal compressor for offshore and subsea applications are discussed and case studies for horizontal and vertical compressor train arrangements are presented. (orig.)

Integrity of subsea control umbilical

OpenAIRE

Yasseri, R; Yasseri, S; Wang, B

2014-01-01

Controlling subsea oil and gas production systems requires fibre optics, power cables and tubes for the transportation of chemical for injection and fluid for hydraulic controls. These are arranged in helical bundles in successive layers. Shaped thermoplastic fillers are used to separate components and to fill out voids in the cross section. If necessary, armour is added to provide strength for the dynamic loads. This paper describes the application of 3D finite element method to assess the s...

Development of a subsea system for water separation; Desenvolvimento de sistema submarino de separacao de agua produzida

Energy Technology Data Exchange (ETDEWEB)

Figueiredo, Mauricio W. de; Ramalho, Joao Batista V.S.; Souza, Antonio Luiz S. de; Gomes, Jose Adilson T.; Burmann, Clovis P. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

Oil production is normally followed by water production in increasing rates, mostly when waterflooding is used as oil recovery mechanism. In order to minimize the impact that high rates of produced water causes to the topside facilities , PETROBRAS is working on the development of a subsea system for oil-water separation, so that most of the produced water on the mud line can be removed and reinjected in the reservoir or in a bearing formation. The article shows how this development has been carried, the scenario definition for the pilot, the problems associated to an installation in a system already operating and the oil characteristics determination. These data constitute the base for the survey to define the technologies with potential application on the separation system to be developed. The special characteristic of the oil, with high tendency to form stable emulsions with water, are also analyzed, as well as the difficulties it brings to the process in the subsea environment, where there are vessel size and fluid heating limitations. (author)

On how to understand and present the uncertainties in production assurance analyses, with a case study related to a subsea production system

International Nuclear Information System (INIS)

Aven, Terje; Pedersen, Linda Martens

2014-01-01

Production assurance analyses of production systems are in practice typically carried out using flow network modelling and Monte Carlo simulations. Based on the network and probability distribution assumptions for equipment lifetime and restoration time, the simulation tool produces predictions/estimates and uncertainty distributions of the production availability, which is defined as the ratio of production to planned production, or any other reference level, over a specified period of time. To adequately communicate the results from the analyses, it is essential that there is in place a framework which clarifies how to understand the concepts introduced, including the uncertainty distributions produced. Some key elements of such a conceptual framework are well established in the industry, for example the use of probability models to represent the stochastic variation related to lifetimes and restoration times. However an overall framework linking this variation, as well as “model uncertainties”, to the epistemic uncertainty distribution for the output production availability, has been lacking. The purpose of the present paper is to present such a framework, and in this way provide new insights to and guidelines on how to understand and present the uncertainties in practical production assurance analyses. An example related to a subsea production system is used to illustrate the framework and the guidelines

Operational experience gained from the Central Brae subsea field

International Nuclear Information System (INIS)

Sapp, S.J.; Gomersall, S.D.

1994-01-01

The size of the field discoveries made in the North Sea in recent years has declined dramatically. With the low oil price many small fields are not viable stand alone developments. The North Sea has a large, well developed infrastructure of production facilities and pipelines. With many platforms now operating below optimum production rate, subsea tieback of these small fields utilizing the available processing capacity is the most economically attractive means of development. This paper presents a history of such a field development. The Central Brae field is located within the Brae complex of fields, 155 miles north east of Aberdeen, and has been developed by means of a subsea facility tied back to the Brae Alpha platform. A great deal of experience has been gained through the field development, not only in subsea operations but also in completion and template design and operating philosophy

Evaluation report on research and development of a subsea petroleum production system; Kaitei sekiyu seisan system no kenkyu kaihatsu ni kansuru hyoka hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1985-03-01

In order to assure stable supply of oil and natural gas resources, and achieve enhancement in ocean development technologies in general, development has been made on the subsea petroleum production system (SBPPS), which is effective in ocean floor petroleum production from oil fields at great depths (300 m or deeper), and can be applicable to continental shelves and continental slopes around Japan. The SBPPS consists of four sub-systems of shafts, pipelines, manifolds, and riser and oil storage, whose basic development targets were established for the total system. The system was given a conceptual design for the total system, and the above four sub-systems were designed according to the conceptual design. The experimenting devices of each system were fabricated on a trial basis while fundamental studies are being made on component technologies, and experiments were performed to verify basic functions of the sub-systems. Developments were made on such operation technologies as the system operation technology, production control technology, safety control technology, and maintenance and repair technology required to operate the SBPPS. On-shore and general off-shore experiments were carried out to verify the functions of the experimenting devices of each system, the comprehensive functions and the operation technology. Comprehensive evaluation was given on the above achievements from the technical, economic and social viewpoints. (NEDO)

Subsea industry implements NORSOK: Happy marriages reduce costs

International Nuclear Information System (INIS)

Heggelund, N.

1995-01-01

Cost reduction by implementing NORSOK standards and cooperation between subsea suppliers to the Norwegian continental shelf, are discussed in this article. The aim of NORSOK, which is based on US standards, is to achieve standardization of technical requirements for drilling and production facilities, to identify and develop common requirements for equipment and installations, based on functional specifications, interfaces and limited variety for equipment and design, and to take into consideration existing industry standards and use these where possible. The offspring of cooperation is notable cost reductions. Subsea costs at Saga's Vigdis field have been reduced by 50% in two years. More subsea projects could come up soon. Norsk Hydro has short-listed a semi PDQ (Processing, Drilling and living Quarters), a ship or Gullfaks tie-in as runner-up concepts for the Viksund project. 1 fig

The largest subsea hot tap (future tap flange) at Angel Field, Australia

Energy Technology Data Exchange (ETDEWEB)

Lad, Deepak; Drysdale, Colin [T.D. Williamson (United States); Naidoo, Sashie [T.D. Williamson (Australia)

2008-07-01

A subsea hot tap was conducted near the gas production platforms in Angel Field, Australia in September 2007 and verified as the largest no. 900 subsea hot tap by Australian authorities. This paper outlines the subsea tapping process, risks and safety issues in deep water environment, including the need to ensure 100% system accuracy and that the machine fluids used to operate the subsea tapping machines were environmentally friendly. The testing phase included land and water testing. In the land tests, issues relating to metal hardness, temperature, pressure and ocean currents that affected machine stability, torque and cutting rate were considered. All preliminary design and testing focused on being able to mount the tapping machine to a pre-existing hot-tap flange and conduct the tapping operation, start to finish, preferably without changing the cutter. The water depth tests took place inside a pressurized, underwater hyperbaric chamber. The equipment repeated the land testing process in conditions duplicating that of the actual project site. Timing was also measured in multiple climatic conditions (except water depth) to obtain an estimation of various scenarios. The field tapping process was conducted without problems in over six hours with a single cutter and without any stalls. (author)

Safety integrity under demanding conditions: A study on Permit-to-Work (PTW) systems in the Marine-Subsea sector

OpenAIRE

Jayakumar, Shambu

2015-01-01

Master's thesis in Risk management Last few years has seen evaluation of the oil and gas industry into innovative subsea solution and technological leap leading to the subsea factory. Taking this into perspective the marine subsea industry is one of the most developing sectors involving many stakeholders with a wide range of background to perform various operations. These operations bring together marine operators, ship owners, subsea asset owners/asset operators, subsea equipment manufact...

Availability analysis of subsea blowout preventer using Markov model considering demand rate

Directory of Open Access Journals (Sweden)

Sunghee Kim

2014-12-01

Full Text Available Availabilities of subsea Blowout Preventers (BOP in the Gulf of Mexico Outer Continental Shelf (GoM OCS is investigated using a Markov method. An updated β factor model by SINTEF is used for common-cause failures in multiple redundant systems. Coefficient values of failure rates for the Markov model are derived using the β factor model of the PDS (reliability of computer-based safety systems, Norwegian acronym method. The blind shear ram preventer system of the subsea BOP components considers a demand rate to reflect reality more. Markov models considering the demand rate for one or two components are introduced. Two data sets are compared at the GoM OCS. The results show that three or four pipe ram preventers give similar availabilities, but redundant blind shear ram preventers or annular preventers enhance the availability of the subsea BOP. Also control systems (PODs and connectors are contributable components to improve the availability of the subsea BOPs based on sensitivity analysis.

Cost reduction in deep water production systems

International Nuclear Information System (INIS)

Beltrao, R.L.C.

1995-01-01

This paper describes a cost reduction program that Petrobras has conceived for its deep water field. Beginning with the Floating Production Unit, a new concept of FPSO was established where a simple system, designed to long term testing, can be upgraded, on the location, to be the definitive production unit. Regarding to the subsea system, the following projects will be considered. (1) Subsea Manifold: There are two 8-well-diverless manifolds designed for 1,000 meters presently under construction and after a value analysis, a new design was achieved for the next generation. Both projects will be discussed and a cost evaluation will also be provided. (2) Subsea Pipelines: Petrobras has just started a large program aiming to reduce cost on this important item. There are several projects such as hybrid (flexible and rigid) pipes for large diameter in deep water, alternatives laying methods, rigid riser on FPS, new material...etc. The authors intend to provide an overview of each project

Development of a numerical simulator to control the liquid level of a subsea separator system; Dsenvolvimento de simulador numerico para controle de nivel de um sistema de separacao submarina

Energy Technology Data Exchange (ETDEWEB)

Shiguemoto, Denis; Rodrigues, Vinicius Mastelaro [DPR Engenharia, Campinas, SP (Brazil); Tsukada, Raphael; Mendes, Jose Ricardo Palaquim [Universidade Estadual de Campinas (UNICAMP), SP (Brazil); Serapiao, Adriane Beatriz de Souza [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Sao Paulo, SP (Brazil); Estevam, Valdir [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2012-07-01

The challenges posed by recent discoveries of oil accumulations at bigger distances from the cost and ultra deep water depths (above 2500 meters) have stimulated the development of technologies and equipment to overcome these challenges. A major technological issue is the need for larger vessels capable of withstanding the weight of installed equipment and pipe production, which significantly increase the manufacturing cost which is already of the order of billions of dollars. The oil industry has focused efforts on developing solutions aimed to reduce weight installed on production platforms. In this context the Subsea Separation Systems was developed in order to carry out the primary processing under the water, thereby reducing the processing plant installed in the oil production platforms. It is a biphasic (liquid and gas) separator that sends the phases to the platform by means of independent pipes. This paper presents a numerical simulator developed to understand the behavior of the liquid level inside the Subsea Separations Systems for its operating conditions. A control system for liquid level was tested and evaluated considering the behavior of fluids within the Subsea Separation System and the pipes that carry them to the production unit. The numerical simulator developed allows a quick and practical understanding of the behavior of the liquid level inside the equipment and also the behavior of pressure and flow within the production pipe which produce benefits for the development design. (author)

The multiple gas-liquid subsea separation system: development and qualification of a novel solution for deep water field production

Energy Technology Data Exchange (ETDEWEB)

Abrand, Stephanie; Butin, Nicolas; Shaiek, Sadia; Hallot, Raymond [Saipem S.p.A., Milano (Italy)

2012-07-01

Subsea processing is more and more considered as a viable solution for the development of deep and ultra deep water fields. SAIPEM has developed a deep water gas separation and liquid boosting system, based on its proprietary 'Multi pipe' separator concept, providing a good flexibility in handling a wide range of steady and un-steady multiphase input streams using a relatively simple mechanical arrangement. The Multi pipe Concept features an array of vertical pipes for gas/liquid separation by gravity and adequate liquid hold up volumes. The operating principle is the same as standard gravity vessels. Specific inlet pipe arrangements have been worked out to enhance the separation efficiency and internals can be implemented to further optimize the performances. The limited diameter and wall thickness of the vertical pipes make the Multi pipe Concept particularly suited for deep and ultra-deep water applications and/or high pressure conditions where the selection of a single separator vessel could lead to unpractical wall thicknesses. In most cases, standard API or ASME pipes can be utilized for the Multi pipe Separator, thus enabling conventional fabrication methods, and in turn reducing cost and delivery time and opening opportunities for local content. The qualification testing program has seen two subsequent phases. The first qualification phase aimed at the confirmation of the hydrodynamic behavior of the system. In particular, the homogeneous distribution of the multiphase stream into the pipes and the stability of the liquid levels under un-steady inlet conditions were continuously assessed during the tests. This first qualification phase gave confidence in the viability of the Multi pipe and in its good hydrodynamic behavior under the different inlet conditions that can be encountered during field production. It proved that, having the same liquid level in all the separator pipes, whatever the inlet conditions are, the Multi pipe separator can be

Process for running scrapers, particularly for subsea petroleum well lines; Fremgangsmaate ved kjoering av skrapere, saerlig for undervannspetroleumbroenn-roerledninger

Energy Technology Data Exchange (ETDEWEB)

Silva, Jose Eduardo Mendonca da; Herdeiro, Marco Antonio Nogueira; Capplonch, Ricardo Wagner; Miranda, Luiz Vicente Auler Passos

1997-09-29

The invention relates to a cleaning method of offshore pipelines. A process for running scrapers for subsea petroleum well lines has, according to a first embodiment, launching a scraper through the line towards the wellhead on a step-by-step basis. The operation proceeds by sending the scraper along successively larger sections via reversing flow through the obstructed line to limit passage of the scraper to that obstructed line, until the whole line is swept. Furthermore, according to a second embodiment, the process consists of the launching of one or more scrapers from a chamber installed in the subsea production system, towards the platform, sweeping only the whole obstructed line, all at once. Once cleaning of the obstructed line is completed, new scrapers may be sent from the platform to the subsea equipment chamber where they are stored until a further cleaning operation is required. The chamber installed in the subsea equipment may serve more than one obstructed line

Advanced Applications of Subsea Control Systems

International Nuclear Information System (INIS)

Duncan, G.; Kitt, P.; Leipner, G.A.; Whitaker, T.

2002-01-01

the umbilical cable with its conductors running in close proximity to each other, meaning operating with very high reactive losses. In Kvaerner Oilfield Products (KOP) the associated technology is being developed as a holistic programme, the Icon (intelligent control) Initiative. KOP's latest generation of sub sea control systems, iCon, encompasses the entire control system and not just the sub sea control module (SCM). iCon provides significantly enhanced functionality over previous modules including 'Open' data-communications with enhanced performance and flexibility and increased control/monitoring functionality within the SCM. The iCon based Kvaerner Slip-on DUET Multiphase Flow Meter non-intrusively measures the individual flow rates of water, oil and gas in a multiphase environment. The use of a sub sea multiphase flow meter not only eliminates the need for a test line and an extra inlet separator, but can also accelerate oil recovery adding considerable value to the field development economics. The DUET 'Slip-On' meter replaces the entire steel spool with a composite material producing the meter body in the same composite. The non-intrusive nature of the meter applied to the slip-on deployment method means that recovery and deployment is safer, well shut-in during retrieval is avoided and the meter can be retrofitted at any time. Kvaerner Oilfield Products has produced the iCon system to meet the above challenges and be the enabling technology for the sub-sea production and process systems which will be required to satisfy our client's future needs

Minimizing the cost of subsea developments through technological innovation

International Nuclear Information System (INIS)

Eyre, G.; Loth, B.

1994-01-01

The paper summarizes the results of an extensive study carried out for the UK Government. This assessed the cost and economic impact of technological innovation on subsea and floating developments in the UKCS. The study covered, innovations that could be applied to subsea developments to significantly reduce cost, including multiwell completions, composite pipelines, compartmented pipelines, pipeline specification breaking and autonomous control systems. Cost and economic models were used to assess the economic impact of technological innovation on marginal field developments. The results of these assessments were drawn up as a series of ranking lists designed to assist manufacturers and suppliers in establishing priorities for research and development funding. The study also explored the potential UKCS and World market for innovative subsea technologies and quantified the research and development required to bring key innovations into commercial use

Scour Monitoring System for Subsea Pipeline Based on Active Thermometry: Numerical and Experimental Studies

Directory of Open Access Journals (Sweden)

Jun Du

2013-01-01

Full Text Available A scour monitoring system for subsea pipeline based on active thermometry is proposed in this paper. The temperature reading of the proposed system is based on a distributed Brillouin optical fiber sensing technique. A thermal cable acts as the main component of the system, which consists of a heating belt, armored optical fibers and heat-shrinkable tubes which run parallel to the pipeline. The scour-induced free span can be monitored through different heat transfer behaviors of in-water and in-sediment scenarios during heating and cooling processes. Two sets of experiments, including exposing different lengths of the upper surface of the pipeline to water and creating free spans of various lengths, were carried out in laboratory. In both cases, the scour condition was immediately detected by the proposed monitoring system, which confirmed the system is robust and very sensitive. Numerical study of the method was also investigated by using the finite element method (FEM with ANSYS, resulting in reasonable agreement with the test data. This brand new system provides a promising, low cost, highly precise and flexible approach for scour monitoring of subsea pipelines.

Modular Subsea Monitoring Network (MSM) - Realizing Integrated Environmental Monitoring Solutions

Science.gov (United States)

Mosch, Thomas; Fietzek, Peer

2016-04-01

In a variety of scientific and industrial application areas, ranging i.e. from the supervision of hydrate fields over the detection and localization of fugitive emissions from subsea oil and gas production to fish farming, fixed point observatories are useful and applied means. They monitor the water column and/or are placed at the sea floor over long periods of time. They are essential oceanographic platforms for providing valuable long-term time series data and multi-parameter measurements. Various mooring and observatory endeavors world-wide contribute valuable data needed for understanding our planet's ocean systems and biogeochemical processes. Continuously powered cabled observatories enable real-time data transmission from spots of interest close to the shore or to ocean infrastructures. Independent of the design of the observatories they all rely on sensors which demands for regular maintenance. This work is in most cases associated with cost-intensive maintenance on a regular time basis for the entire sensor carrying fixed platform. It is mandatory to encounter this asset for long-term monitoring by enhancing hardware efficiency. On the basis of two examples of use from the area of hydrate monitoring (off Norway and Japan) we will present the concept of the Modular Subsea Monitoring Network (MSM). The modular, scalable and networking capabilities of the MSM allow for an easy adaptation to different monitoring tasks. Providing intelligent power management, combining chemical and acoustical sensors, adaptation of the payload according to the monitoring tasks, autonomous powering, modular design for easy transportation, storage and mobilization, Vessel of Opportunity-borne launching and recovery capability with a video-guided launcher system and a rope recovery system are key facts addressed during the development of the MSM. Step by step the MSM concept applied to the observatory hardware will also be extended towards the gathered data to maximize the

Evaluating vibration performance of a subsea pump module by full-scale testing and numerical modelling

NARCIS (Netherlands)

Beek, P.J.G. van; Pereboom, H.P.; Slot, H.J.

2016-01-01

Prior to subsea installation, a subsea system has to be tested to verify whether it performs in accordance with specifications and component specific performance evaluation criteria. It is important to verify that the assembled components work in accordance with the assumptions and design criteria

Enhanced Subsea Acoustically Aided Inertial Navigation

DEFF Research Database (Denmark)

Jørgensen, Martin Juhl

time is expensive so lots of effort is put into cutting down on time spent on all tasks. Accuracy demanding tasks such as subsea construction and surveying are subject to strict quality control requirements taking up a lot of time. Offshore equipment is rugged and sturdy as the environmental conditions...... are harsh, likewise should the use of it be simple and robust to ensure that it actually works. The contributions of this thesis are all focused on enhancing accuracy and time efficiency while bearing operational reliability and complexity strongly in mind. The basis of inertial navigation, the inertial...... at desired survey points; the other uses a mapping sensor such as subsea lidar to simply map the area in question. Both approaches are shown to work in practice. Generating high resolution maps, as the latter approach, is how the author anticipates all subsea surveys will be conducted in the near future....

Deep-water subsea lifting operations

Energy Technology Data Exchange (ETDEWEB)

Nestegaard, Arne; Boee, Tormod

2010-07-01

Significant costs are related to marine operations in the installation phase of deep water subsea field developments. In order to establish safe operational criteria and procedures for the installation, detailed planning is necessary, including numerical modelling and analysis of the environmental conditions and hydrodynamic loads on the installed object as well as the installation equipment. This paper presents recommendations for modelling and analysis of deep water subsea lifting operations developed for the new DNV RP-H103 [1]. During installation of subsea structures, the highest dynamic forces are most often encountered in the splash zone. Recommendations for estimation of maximum forces will be presented. For small structures and tools, installation through the moon pool of a small installation vessel is often preferred. Calculation methods for loading on structures installed through a moon pool will be presented. During intervention or installation in deep water a significant amplification of amplitude and forces can be experienced when the frequency range of vertical crane tip motion coincides with the natural vertical oscillation of the lift wire and load. Vertical resonance may reduce the operability of the operation. Simplified calculation methods for such operations are presented. (Author)

Integrity management of deepwater subsea flow system; Gerenciamento de integridade de sistema de escoamento submarino em aguas profundas

Energy Technology Data Exchange (ETDEWEB)

Souza Junior, Helio A. de; Oliveira, Luiz F.S.; Cardoso, Cassia O.; Cabete, Ricardo; Matos, Barbara; Alvarenga, Tobias V. [Det Norske Veritas (DNV), Rio de Janeiro, RJ (Brazil); Silva, Wallace B. e; Bessa, Guilherme S.; Divenyi, Sandor; Gomes, Andre L.C [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Unidade de Negocios Rio

2008-07-01

Deep and ultra-deepwater Exploration and Production activities offshore Brazil have become a reality, corresponding nowadays to the majority of the national production. In order to make oil and gas production viable in this kind of environment, complex systems are used, requiring very strong investments, as well as equipment with high reliability requirements, to assure the benefits of the high productivity of the fields. The production flow systems comprise rigid and flexible pipelines, umbilicals and subsea equipment, to which high costs are associated regarding inspection, maintenance and intervention activities. Besides this, social claims through actions by regulatory agencies are getting stricter with time, as they increase their control of aspects related to safety and environmental impact aspects. In this scenario, PETROBRAS, through its Exploration and Production Business Unit in Rio de Janeiro (UN-RIO), signed a service contract with Det Norske Veritas (DNV). The development and application of specific methodologies for risk and reliability analysis, as well as the development of a specific software, are included in this project. (author)

Sectional pipeline bundles. Design, fabrication and testing of a subsea pipeline connection system

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-01

The tests of the prototype system indicated that the system is applicable for connecting pipeline bundle sections. The overall performance of the system is therefore concluded to be satisfactory. Some modifications are required though, for improving the reliability of the system to the level required for offshore North Sea application. The tests showed that connection of the pipeline bundle sections can be performed for alignment tolerances larger than those expected during a typical subsea installation. Pull-in of bundle end sections can be performed with pull-in wires deployed from surface. The offshore tests showed that handling of wires must be done with great care to avoid possibility for wire entanglement, especially if a fully diverless system is to be used. The flowline connection tool was found to be suitable for final alignment of the individual spool ends. It was demonstrated that face to face contact between the hub faces in the connector was obtained after tie-in. Pressure tests showed that the connector could be sealed by the tie-in force applied by the connection tool tie-in system. However, the standard connector clamp which was used, was found to be insuficient for maintaining the connector effectively sealed after removal of the pull-in force applied by the connection tool. Based on the results proposals for improvements of the system are included. Improvements are applicable to the current system for connection of bundle sections or for tie-in operations, relating to conventional pipelines. The improvements also includes a strong connection clamp suitable for subsea use. The connection clamp will replace the standard clamp devise used in this project. (au) EFP-96. 41 refs.

Successful pipeline installation for Parque das Conchas development; Subsea installation

Energy Technology Data Exchange (ETDEWEB)

Bartz, Cesar

2010-07-01

Subsea 7 has successfully delivered again in Brazilian deep-waters. The subsea engineering and construction company has recently completed pipeline installation activities for the Parque das Conchas (BC-10) development, offshore Brazil. (AG)

Development of 3000 m Subsea Blowout Preventer Experimental Prototype

Science.gov (United States)

Cai, Baoping; Liu, Yonghong; Huang, Zhiqian; Ma, Yunpeng; Zhao, Yubin

2017-12-01

A subsea blowout preventer experimental prototype is developed to meet the requirement of training operators, and the prototype consists of hydraulic control system, electronic control system and small-sized blowout preventer stack. Both the hydraulic control system and the electronic system are dual-mode redundant systems. Each system works independently and is switchable when there are any malfunctions. And it significantly improves the operation reliability of the equipment.

Underwater sound due to a subsea high speed turbo compressor

NARCIS (Netherlands)

Binnerts, B.; Benda-Beckmann, A.M. von; Beek, P.J.G. van

2014-01-01

In the oil & gas industry there is a trend towards more subsea activities. To improve gas recovery from existing and new fields at greater depths, the produced gas will be compressed, processed and transported via subsea templates and underwater networks (pipelines, flexible risers, etc.). Besides

Egypt's first subsea completion: A Gulf of Suez case history

International Nuclear Information System (INIS)

El Hawary, A.; Hoffman, J.G.

1996-01-01

A case history of the Gulf of Suez Petroleum Co.'s (Gupco) first subsea completion is provided. The first completion was for Well GS 373-2, a previously drilled and tested exploration well located in the south portion of the gulf of Suez. Subsea technology was used to economically justify development of this one-well marginal field, which was discovered in 1978. Traditional methods proved to be too costly for development, therefore application of a low-cost subsea tree was used to capture the resources. In the Gulf of Suez, many fields have been discovered but have not been developed because of low reserves. These marginal projects can have a profound impact on the revenue and shareholder value if an economic method is used to exploit these opportunities. Platform installation was not feasible because of reserve size, hence the well has remained abandoned until recently. This paper presents a summarized look at subsea completion technology. The cost comparison of traditional development methods will be made, given the local cost structure in Egypt. The application of this technology has some limitations and constraints that will be discussed in the paper. Furthermore, the actual field installation of Egypt's first subsea tree will be summarized. Also included is a discussion on simple remote controls and offshore installation operations

Grouting techniques for the unfavorable geological conditions of Xiang'an subsea tunnel in China

Directory of Open Access Journals (Sweden)

Dingli Zhang

2014-10-01

Full Text Available One of the major challenges during subsea tunnel construction is to seal the potential water inflow. The paper presents a case study of Xiang'an subsea tunnel in Xiamen, the first subsea tunnel in China. During its construction, different grades of weathered geomaterials were encountered, which was the challenging issue for this project. To deal with these unfavorable geological conditions, grouting was adopted as an important measure for ground treatment. The grouting mechanism is first illustrated by introducing a typical grouting process. Then the site-specific grouting techniques employed in the Xiang'an subsea tunnel are elaborated. By using this ground reinforcement technique, the tunneling safety of the Xiang'an subsea tunnel was guaranteed.

Ultra-Deepwater Production Systems

Energy Technology Data Exchange (ETDEWEB)

Ken L. Smith; Marc E. Leveque

2005-05-31

The report herein is a summary of the work performed on three projects to demonstrate hydrocarbon drilling and production methods applicable to deep and ultra deepwater field developments in the Gulf of Mexico and other like applications around the world. This work advances technology that could lead to more economic development and exploitation of reserves in ultra-deep water or remote areas. The first project is Subsea Processing. Its scope includes a review of the ''state of the art'' in subsea components to enable primary production process functions such as first stage liquids and gas separation, flow boosting, chemical treatment, flow metering, etc. These components are then combined to allow for the elimination of costly surface production facilities at the well site. A number of studies were then performed on proposed field development projects to validate the economic potential of this technology. The second project involved the design and testing of a light weight production riser made of composite material. The proposed design was to meet an actual Gulf of Mexico deepwater development project. The various engineering and testing work is reviewed, including test results. The third project described in this report encompasses the development and testing of a close tolerance liner drilling system, a new technology aimed at reducing deepwater drilling costs. The design and prototype testing in a test well are described in detail.

Remote controlled tool systems for nuclear sites have subsea applications

International Nuclear Information System (INIS)

Bath, B.; Yemington, C.; Kuhta, B.

1995-10-01

Remotely operated underwater tool systems designed to operate in Nuclear Fuel Storage Basins can be applied to deep water, subsea oilfield applications. Spent nuclear fuel rods re stored underwater in large indoor swimming pool-like facilities where the water cover shields the workers from the radiation. This paper describes three specialized tooling systems that were designed and built by Sonsub for work at the Department of Energy's Hanford site. The Door Seal Tool removed an existing seal system, cleaned a 20 ft. tall, carbon steel, underwater hatch and installed a new stainless steel gasket surface with underwater epoxy. The Concrete Sampling Tool was built to take core samples from the vertical, concrete walls of the basins. The tool has three hydraulic drills with proprietary hollow core drill bits to cut and retrieve the concrete samples. The Rack Saw remotely attached itself to a structure, cut a variety of steel shapes and pipes, and retained the cut pieces for retrieval. All of these systems are remotely operated with onboard video cameras and debris collection systems. The methods and equipment proven in this application are available to refurbish sealing surfaces and to drill or sample concrete in offshore oil field applications

Laboratory testing and field implementation of scale inhibitor squeeze treatments to subsea and platform horizontal wells, North Sea Basin

Energy Technology Data Exchange (ETDEWEB)

Jordan, M. M.; Lewis, M. [Nalco/Exxon Energy Chemicals Ltd, Aberdeen (United Kingdom); Tomlinson, C. J.; Pritchard, A. R. P. [Enterprise Oil Plc, Aberdeen (United Kingdom)

1998-12-31

Field results from a number of scale squeeze treatments carried out on subsea and platform horizontal wells in the Nelson Field of the North Sea are presented. Scale inhibitor chemicals are reviewed along with factors which influence inhibitor selection for both horizontal and highly deviated wells. Formation brine/inhibitor incompatibility, formation minerals/inhibitor incompatibility, and the potential for sand production and oil-in-water process as a result of these incompatibilities, are discussed. Practical difficulties in squeezing subsea horizontal wells, the use of chemical stabilizers to reduce formation brine/inhibitor incompatibility, variation of pump rates to encourage propagation of inhibitor along the wellbore, and the potential of fluid diversion are outlined, stressing the significance of production logging data (or good reservoir simulation data), to evaluate the location of water production prior to the squeeze treatment. Results of these treatments show that with the correct laboratory evaluation of both scale inhibitor and divertor agents, and with appropriate utilization of production logging or reservoir simulation data, it is possible to carry out scale inhibitor squeeze treatments of subsea and platform horizontal wells without having to resort to coiled tubing. 22 refs., 1 tab., 14 figs

A real-time non-contact monitoring method of subsea pipelines

Directory of Open Access Journals (Sweden)

Song Dalei

2015-01-01

Full Text Available To monitoring the subsea pipeline in real-time, a special potentiometric sensor array and a potential prediction model are presented in this paper. Firstly, to measure the potential of seawater, a special potentiometric sensor array with Ag/AgCl all-solid-state reference electrodes is first developed in this paper. Secondly, according to the obtained distribution law of electric field intensities a prediction model of the pipeline potentials is developed. Finally, the potentiometric sensor array is applied in sink experiment and the prediction model is validated by the sink measurements. The maximum error for pipeline potential prediction model is 1.1 mV. The proposed non-contact monitoring method for subsea pipeline can predict the potential of sea pipeline in real-time, thus providing important information for further subsea pipeline maintenance.

Ultra-Deepwater Production Systems

Energy Technology Data Exchange (ETDEWEB)

K. L. Smith; M. E. Leveque

2004-09-30

This report includes technical progress made during the period October, 2003 through September, 2004. At the end of the last technical progress report, the subsea processing aspects of the work program had been dropped due to the lack of commercial opportunity within ConocoPhillips, and the program had been redirected towards two other promising deepwater technologies: the development and demonstration of a composite production riser, and the development and testing of a close-tolerance liner drilling system. This report focuses on these two technologies.

SeeStar: an open-source, low-cost imaging system for subsea observations

Science.gov (United States)

Cazenave, F.; Kecy, C. D.; Haddock, S.

2016-02-01

Scientists and engineers at the Monterey Bay Aquarium Research Institute (MBARI) have collaborated to develop SeeStar, a modular, light weight, self-contained, low-cost subsea imaging system for short- to long-term monitoring of marine ecosystems. SeeStar is composed of separate camera, battery, and LED lighting modules. Two versions of the system exist: one rated to 300 meters depth, the other rated to 1500 meters. Users can download plans and instructions from an online repository and build the system using low-cost off-the-shelf components. The system utilizes an easily programmable Arduino based controller, and the widely distributed GoPro camera. The system can be deployed in a variety of scenarios taking still images and video and can be operated either autonomously or tethered on a range of platforms, including ROVs, AUVs, landers, piers, and moorings. Several Seestar systems have been built and used for scientific studies and engineering tests. The long-term goal of this project is to have a widely distributed marine imaging network across thousands of locations, to develop baselines of biological information.

Subsea Infrastructure Inspection

DEFF Research Database (Denmark)

Mai, Christian; Pedersen, Simon; Hansen, Leif

2016-01-01

Due to the increasing energy demands, the offshore energy business has boomed in recent decades. Sub-sea pipeline and power transmission cable installations are commonly applied worldwide. Any potential breakages can cause equipment damage and also damage the environment. The majority...... (S-AUVs) can significantly change the inspections of infrastructure, as these vehicles could be much cheaper to deploy. S-AUVs can potentially conduct faster data collection and provide higher inspection data quality. However, there are still some technical challenges related to: underwater wireless...

DNV launches new recommended practice for design of subsea equipment

Energy Technology Data Exchange (ETDEWEB)

Toerstad, Elisabeth Heggelund

2005-07-01

The application of modern corrosion-resistant alloys to subsea pipelines and components has led to serious problems of hydrogen embrittlement from the corrosion protection system, resulting in cracks and leaks. The most commonly known incidents of this kind are the duplex hubs on Voinhaven, UK and Garn West and the 13% Cr pipelines on Tune and Aasgard, all at the Norwegian shelf. Understanding the nature of this problem has called for a broad multidisciplinary approach, involving expertise on corrosion and metallurgy as well as structural design and integrity. Competence in probabilistic analyses and risk assessments has also been necessary in order to set acceptance criteria and evaluate probability of failure for existing installations. (Det Norske Veritas (DNV) is now about to issues a Recommended Practise (RP) for design of subsea equipment in duplex steels under Cathodic Protection. The RP is based on knowledge gained through failure investigations, qualification pr grams and research work, and a broad industry consortium has contributed with experience and knowledge. Hydrogen Induced Stress Cracking (HISC) due to hydrogen from the Cathodic Protection (CP) system has been one of the most frequent and costly failure modes for subsea equipment and pipelines in the North Sea over the recent years. Today, the international oil business is looking to Norway for assistance in establishing detailed knowledge about and preventive measures against this failure mode. A significant research work is currently being carried out jointly by DNV, SINTEF and TWI (The Welding Institute), supported by a broad industry consortium - aiming at a better understanding of the HISC (Hydrogen Induced Stress Cracking) mechanism and establishment of test methods which reflect the sensitivity to cracking. DNV has also established a Recommended Practice, which will be issued late 2005. It reflects the experience gained from the failure examinations, fitness for purpose evaluations, research

Ultra-Deepwater Production Systems

Energy Technology Data Exchange (ETDEWEB)

K. L. Smith; M. E. Leveque

2003-09-30

This report includes technical progress made during the period October, 2002 through September, 2003. At the end of the second technical progress report, the ConocoPhillips opportunities to apply subsea processing in the Gulf of Mexico had been exhausted, and an alternative site was identified in Norway. This was a non-ConocoPhillips operated field, and the subsea processing was proposed as a phased development approach with 2-phase separation at the field, and then gas and liquids exported via pipeline to remote platform locations for processing. Although the unrisked economics were quite favorable, the risked economic evaluation compelled the operator to develop the field with the more conventional and proven Floating Production, Storage and Offloading (FPSO) option. Work on the subsea processing was suspended at this time. Discussions with DOE regarding two other step-change deepwater technologies ensued. One was an effort to develop a light-weight, high pressure composite production riser. A field demonstration of the design would then be performed by deploying a limited number of composite joints in a Gulf of Mexico deepwater development. The other was to begin the process of taking drilling with casing technology to the deepwater. This is called, ''close-tolerance liner drilling''. It was agreed that both technologies should be pursued, and the work began. During this reporting period, the initial production riser design had been completed and preliminary test sample components were being fabricated. Regarding the liner drilling, the sub-contractors were selected, the design basis was agreed and designs progressed towards meeting a projected first quarter, 2004 onshore test program.

Corrosion induced failure analysis of subsea pipelines

International Nuclear Information System (INIS)

Yang, Yongsheng; Khan, Faisal; Thodi, Premkumar; Abbassi, Rouzbeh

2017-01-01

Pipeline corrosion is one of the main causes of subsea pipeline failure. It is necessary to monitor and analyze pipeline condition to effectively predict likely failure. This paper presents an approach to analyze the observed abnormal events to assess the condition of subsea pipelines. First, it focuses on establishing a systematic corrosion failure model by Bow-Tie (BT) analysis, and subsequently the BT model is mapped into a Bayesian Network (BN) model. The BN model facilitates the modelling of interdependency of identified corrosion causes, as well as the updating of failure probabilities depending on the arrival of new information. Furthermore, an Object-Oriented Bayesian Network (OOBN) has been developed to better structure the network and to provide an efficient updating algorithm. Based on this OOBN model, probability updating and probability adaptation are performed at regular intervals to estimate the failure probabilities due to corrosion and potential consequences. This results in an interval-based condition assessment of subsea pipeline subjected to corrosion. The estimated failure probabilities would help prioritize action to prevent and control failures. Practical application of the developed model is demonstrated using a case study. - Highlights: • A Bow-Tie (BT) based corrosion failure model linking causation with the potential losses. • A novel Object-Oriented Bayesian Network (OOBN) based corrosion failure risk model. • Probability of failure updating and adaptation with respect to time using OOBN model. • Application of the proposed model to develop and test strategies to minimize failure risk.

Development of hydrate risk quantification in oil and gas production

Science.gov (United States)

Chaudhari, Piyush N.

Subsea flowlines that transport hydrocarbons from wellhead to the processing facility face issues from solid deposits such as hydrates, waxes, asphaltenes, etc. The solid deposits not only affect the production but also pose a safety concern; thus, flow assurance is significantly important in designing and operating subsea oil and gas production. In most subsea oil and gas operations, gas hydrates form at high pressure and low temperature conditions, causing the risk of plugging flowlines, with a undesirable impact on production. Over the years, the oil and gas industry has shifted their perspective from hydrate avoidance to hydrate management given several parameters such as production facility, production chemistry, economic and environmental concerns. Thus, understanding the level of hydrate risk associated with subsea flowlines is an important in developing efficient hydrate management techniques. In the past, hydrate formation models were developed for various flow-systems (e.g., oil dominated, water dominated, and gas dominated) present in the oil and gas production. The objective of this research is to extend the application of the present hydrate prediction models for assessing the hydrate risk associated with subsea flowlines that are prone to hydrate formation. It involves a novel approach for developing quantitative hydrate risk models based on the conceptual models built from the qualitative knowledge obtained from experimental studies. A comprehensive hydrate risk model, that ranks the hydrate risk associated with the subsea production system as a function of time, hydrates, and several other parameters, which account for inertial, viscous, interfacial forces acting on the flow-system, is developed for oil dominated and condensate systems. The hydrate plugging risk for water dominated systems is successfully modeled using The Colorado School of Mines Hydrate Flow Assurance Tool (CSMHyFAST). It is found that CSMHyFAST can be used as a screening tool in

Environmental protection for subsea wells

International Nuclear Information System (INIS)

Diehl, R.J.; Osborne, R.S.; Elwood, J.

1991-01-01

This patent describes an apparatus for receiving and containing surplus fluid from a subsea well installation on the ocean floor including a subsea wellhead assembly disposed in an enclosed protective chamber. It comprises a fluid-carrying conduit connected to the exterior of the protective chamber in fluid communication with the interior of the protective chamber; an inflatable dracon disposed upon and against the ocean floor in protective relation thereto when deflated and releasably connected in fluid communication to an outlet of the conduit; and pressure-balanced relief valve means disposed in the conduit between the outlet and the protective chamber for communicating surplus fluid from the interior of such chamber to the dracon when the fluid pressure within such chamber exceeds a predetermined value. This patent describes a method of completing an underwater well. It comprises installing a hollow cylindrical silo body with attached conductor guide casing into the sea floor; drilling and casing a well through the silo body and conductor guide casing; installing a wellhead assembly on top of the drilled and cased well inside of the silo body; installing a pressure-containing lid on top of the silo body, forming an enclosed protective chamber and isolating the interior of the chamber from the surrounding hydrostatic head of the sea water

Numerical simulation of gas hydrate exploitation from subsea reservoirs in the Black Sea

Science.gov (United States)

Janicki, Georg; Schlüter, Stefan; Hennig, Torsten; Deerberg, Görge

2017-04-01

Natural gas (methane) is the most environmental friendly source of fossil energy. When coal is replace by natural gas in power production the emission of carbon dioxide is reduced by 50 %. The vast amount of methane assumed in gas hydrate deposits can help to overcome a shortage of fossil energy resources in the future. To increase their potential for energy applications new technological approaches are being discussed and developed worldwide. Besides technical challenges that have to be overcome climate and safety issues have to be considered before a commercial exploitation of such unconventional reservoirs. The potential of producing natural gas from subsea gas hydrate deposits by various means (e. g. depressurization and/or carbon dioxide injection) is numerically studied in the frame of the German research project »SUGAR - Submarine Gas Hydrate Reservoirs«. In order to simulate the exploitation of hydrate-bearing sediments in the subsea, an in-house simulation model HyReS which is implemented in the general-purpose software COMSOL Multiphysics is used. This tool turned out to be especially suited for the flexible implementation of non-standard correlations concerning heat transfer, fluid flow, hydrate kinetics, and other relevant model data. Partially based on the simulation results, the development of a technical concept and its evaluation are the subject of ongoing investigations, whereby geological and ecological criteria are to be considered. The results illustrate the processes and effects occurring during the gas production from a subsea gas hydrate deposit by depressurization. The simulation results from a case study for a deposit located in the Black Sea reveal that the production of natural gas by simple depressurization is possible but with quite low rates. It can be shown that the hydrate decomposition and thus the gas production strongly depend on the geophysical properties of the reservoir, the mass and heat transport within the reservoir, and

System to provide 3D information on geological anomaly zone in deep subsea

Science.gov (United States)

Kim, W.; Kwon, O.; Kim, D.

2017-12-01

The study on building the ultra long and deep subsea tunnel of which length is 50km and depth is 200m at least, respectively, is underway in Korea. To analyze the geotechnical information required for designing and building subsea tunnel, topographic/geologiccal information analysis using 2D seabed geophysical prospecting and topographic, geologic, exploration and boring data were analyzed comprehensively and as a result, automation method to identify the geological structure zone under seabed which is needed to design the deep and long seabed tunnel was developed using geostatistical analysis. In addition, software using 3D visualized ground information to provide the information includes Gocad, MVS, Vulcan and DIMINE. This study is intended to analyze the geological anomaly zone for ultra deep seabed l and visualize the geological investigation result so as to develop the exclusive system for processing the ground investigation information which is convenient for the users. Particularly it's compatible depending on file of geophysical prospecting result and is realizable in Layer form and for 3D view as well. The data to be processed by 3D seabed information system includes (1) deep seabed topographic information, (2) geological anomaly zone, (3) geophysical prospecting, (4) boring investigation result and (5) 3D visualization of the section on seabed tunnel route. Each data has own characteristics depending on data and interface to allow interlocking with other data is granted. In each detail function, input data is displayed in a single space and each element is selectable to identify the further information as a project. Program creates the project when initially implemented and all output from detail information is stored by project unit. Each element representing detail information is stored in image file and is supported to store in text file as well. It also has the function to transfer, expand/reduce and rotate the model. To represent the all elements in

En-Tegrity - Advanced subsea well control technology

Energy Technology Data Exchange (ETDEWEB)

Edwards, Jeff

2010-07-01

Shear Seal Valve: En-Tegrity - Advanced subsea well control technology. With the growing complexity of well interventions operations such as zone isolations, chemical treatment, sand removal and side track re-completion drilling, there is an increasing demand for an efficient light well intervention service equipment. This paper details the design, development and qualification program undertaken to introduce a new technology for well interventions operations. The Shear Seal Valve provides dual barrier sealing integrity that is capable of cutting large diameter coiled tubing, drill pipe and intervention tooling within a single compact housing. The hydraulic design of the valve minimizes operating volumes and negates the requirement for mechanical ram locks therefore greatly simplifying control system complexity. Utilizing dual metal to metal sealing technology and a fail safe close rational the system is ideally suited to HPHT applications providing optimum operational integrity. (Author)

An optical system with potential for remote health monitoring of subsea machinery

International Nuclear Information System (INIS)

Jackson, D A

2009-01-01

A prototype fibre-optic sensing system is described with potential to remotely monitor the condition of three-phase variable frequency subsea motors and electric submersible pumps. An indication that the integrity of a powerful electric motor may be compromised can be gained by spectral analysis of the stator drive current, the phases of the currents, the measurement of vibration at specific locations on the motor and the temperature of the bearings. The optical interrogation system is based on an imbalanced Mach–Zehnder fibre interferometer, illuminated with a broadband source with fibre Bragg gratings (FBGs) used as the basic transducers for the current and vibration measurements. Signals were recovered at a distance of 7 km, for the 'in house' current sensor at an effective ac current of 500 A at frequencies from 10 to 1000 Hz with a S/N ratio of 45 dB, together with the relative phases between the currents. These signals were generated with a simulated high power three-phase electric motor. A commercial accelerometer was incorporated into the system which demonstrated a sensitivity of 1 mg Hz −1/2 also from 10 to 1000 Hz. As the interrogation system can only be used to detect dynamic signals, a second interrogation for quasi-static temperature measurements is required; although this was not deployed, possible applications other than bearing temperature measurement are considered

Subsea Cable Tracking by Autonomous Underwater Vehicle with Magnetic Sensing Guidance.

Science.gov (United States)

Xiang, Xianbo; Yu, Caoyang; Niu, Zemin; Zhang, Qin

2016-08-20

The changes of the seabed environment caused by a natural disaster or human activities dramatically affect the life span of the subsea buried cable. It is essential to track the cable route in order to inspect the condition of the buried cable and protect its surviving seabed environment. The magnetic sensor is instrumental in guiding the remotely-operated vehicle (ROV) to track and inspect the buried cable underseas. In this paper, a novel framework integrating the underwater cable localization method with the magnetic guidance and control algorithm is proposed, in order to enable the automatic cable tracking by a three-degrees-of-freedom (3-DOF) under-actuated autonomous underwater vehicle (AUV) without human beings in the loop. The work relies on the passive magnetic sensing method to localize the subsea cable by using two tri-axial magnetometers, and a new analytic formulation is presented to compute the heading deviation, horizontal offset and buried depth of the cable. With the magnetic localization, the cable tracking and inspection mission is elaborately constructed as a straight-line path following control problem in the horizontal plane. A dedicated magnetic line-of-sight (LOS) guidance is built based on the relative geometric relationship between the vehicle and the cable, and the feedback linearizing technique is adopted to design a simplified cable tracking controller considering the side-slip effects, such that the under-actuated vehicle is able to move towards the subsea cable and then inspect its buried environment, which further guides the environmental protection of the cable by setting prohibited fishing/anchoring zones and increasing the buried depth. Finally, numerical simulation results show the effectiveness of the proposed magnetic guidance and control algorithm on the envisioned subsea cable tracking and the potential protection of the seabed environment along the cable route.

Ormen Lange subsea development strategy and execution

Energy Technology Data Exchange (ETDEWEB)

Hogmoen, K. [Norsk Hydro, Oslo (Norway)

2007-07-01

Ormen Lange is the largest natural gas field in development on the Norwegian continental shelf. This paper discussed Norsk Hydro's Ormen Lange development strategy and execution. Several illustrations of the Ormen Lange project were presented, including the field layout and the main challenges of working in deep water. Other challenges involve environmental conditions; long distance control; and hydrate prevention. Several components of the project were presented, including the xmas tree handling system; choke module; control system; large bore tie-in system; in-line tee system; and free spans in pipeline design. Other topics that were presented and illustrated included the feasibility of pipeline design; design optimization with installation contractors; design optimization between intervention methods; positioning; dredging with spiders; excavation with jetprops; ploughing; rock installation; and trenching. The installation of thirty inch pipelines and umbilical lines in shallow and deep water were also discussed and illustrated. The presentation concluded with a discussion of lessons learned subsea. These included early definition of operational requirements; close monitoring of interface work between contractors; professional change management; and thorough testing onshore prior to installation. Securing vessel capacity and timely start-up were among the lessons learned for marine operations. figs.

Subsea ice-bearing permafrost on the U.S. Beaufort Margin: 1. Minimum seaward extent defined from multichannel seismic reflection data

Science.gov (United States)

Brothers, Laura; Herman, Bruce M.; Hart, Patrick E.; Ruppel, Carolyn D.

2016-01-01

Subsea ice-bearing permafrost (IBPF) and associated gas hydrate in the Arctic have been subject to a warming climate and saline intrusion since the last transgression at the end of the Pleistocene. The consequent degradation of IBPF is potentially associated with significant degassing of dissociating gas hydrate deposits. Previous studies interpreted the distribution of subsea permafrost on the U.S. Beaufort continental shelf based on geographically sparse data sets and modeling of expected thermal history. The most cited work projects subsea permafrost to the shelf edge (∼100 m isobath). This study uses a compilation of stacking velocity analyses from ∼100,000 line-km of industry-collected multichannel seismic reflection data acquired over 57,000 km2 of the U.S. Beaufort shelf to delineate continuous subsea IBPF. Gridded average velocities of the uppermost 750 ms two-way travel time range from 1475 to 3110 m s−1. The monotonic, cross-shore pattern in velocity distribution suggests that the seaward extent of continuous IBPF is within 37 km of the modern shoreline at water depths < 25 m. These interpretations corroborate recent Beaufort seismic refraction studies and provide the best, margin-scale evidence that continuous subsea IBPF does not currently extend to the northern limits of the continental shelf.

Grand Bank seabed and shallow subsurface geology in relation to subsea engineering design

Energy Technology Data Exchange (ETDEWEB)

Sonnichsen, G.V.; King, E.L. [Natural Resources Canada, Dartmouth, NS (Canada). Geological Survey of Canada

2005-07-01

An overview of the surficial and subseabed geology of the northeastern section of the Newfoundland Grand Banks was presented with particular reference to the Jeanne d'Arc Basin. The stratigraphy of the upper 100 metres below seafloor has been interpreted from high-resolution seismic reflection data, surficial sediment samples and geotechnical borehole data. This paper described the character and strength properties of nearby seabed sediments and addressed the issue of seabed scour by icebergs, which is the main process threatening subsea facilities. Other potential geohazards such as shallow gas, buried channels and sediment mobility are not considered to be major barriers to offshore development in the Jeanne d'Arc Basin. However, drifting icebergs with large drafts often impact the seabed, producing either linear furrows or circular pits. The constraints to subsea design and construction were identified. It was noted that regional geological characterization is needed to help select the location for offshore platforms as well as routes for excavating trenches for subsea installations for offshore hydrocarbon development. Updated regional surficial and near-seabed stratigraphy is needed to predict foundation conditions beyond ground truth from isolated geotechnical borehole investigations. This paper described the Grand Banks regional setting, regional geology, near-surface sediment in the northeastern Grand Banks, and Quaternary sediments in the northeastern Grand Banks with reference to the Grand Banks Drift, Adolphus Sand, and the Grand Banks Sand and Gravel Formation. Risk assessments have shown that well heads and manifolds should be installed below the seabed in order to avoid damage by seabed-scouring icebergs and that the design scour depth should be re-examined for future subsea development. It was suggested that more emphasis on gathering multibeam bathymetric data and repetitive mapping of the seabed will better define scour risk. 57 refs., 3

Catwell and Sherdaps for deep-water production fields

Energy Technology Data Exchange (ETDEWEB)

Hopper, H.P.; Rey, R. [Cameron, 34 - Beziers (France)

2000-07-01

The names Catwell and SherDaps are derived from: - Catenary Well - Subsea Horizontal Extended Reach Drilling And Production System. Both systems use the technique of being able to drill a well in deep-water either through a platform catenary carrier pipe or a catenary drilling riser. They also offer, in addition, significant advantages when drilling into shallow reservoirs and the ability to enhance production using platform artificial lift systems or easily serviceable pumps either in the well or at the mud-line. Catwell is a platform system with surface wellheads/trees whereas SherDaps uses a group of subsea wellheads/trees/BOP's that are accessible from one permanent catenary drilling riser. Both systems allow drilling/completing and future well intervention from a central location that otherwise would have required several drilling centres (i.e. platforms or subsea) if the conventional approach was followed. It is envisaged that well targets close to a platform will use well conductors possibly with mud-line wellheads, then Catwell to reach the medium range well targets and SherDaps for long range wells. It is considered that this arrangement would allow a single surface drilling/ production centre to have access to well targets giving a foot print range of up to a 20 km diameter. The total Capex savings on a Deep-water Field Development could be in the region of $200 m on a $1 billion development. Opex will be lower with the ability from the drilling center to quickly access any problem well and rectify any faults, minimising lost production. (authors)

A comparative analysis of reliability, maintainability and availability for two alternatives of the production submarine systems: ANM and submarine ducts versus BOP and a subsea well testing tree; Analise comparativa da confiabilidade, mantenabilidade e disponibilidade para duas alternativas de sistemas submarino de producao: ANM e dutos submarinos versus BOP e arvore submarina de teste

Energy Technology Data Exchange (ETDEWEB)

Souza, Arlindo Antonio de; Polillo Filho, Adolfo; Santos, Otto Luiz Alcantara [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

This technical article presents a study using the concepts of the Engineering of the Reliability and Risk Analysis with the objective of doing a comparative evaluation of the reliability of two alternative production systems for a marine well: one composed by a wet christmas tree (ANM) producing through underwater ducts (flow lines) and other, usually used in tests of long duration, using a subsea BOP and a subsea well testing tree (AST). The central point of the work was the evaluation of the probability of happening an event considered as critic, denominated 'critical flaw', during the well production life. The work uses one of the procedures and methodologies adopted in the Well Construction Engineering, GERISK, together with four computer applications for data treatment, generation of flaw distribution curves and times of repair, modelling and Monte Carlo simulations. The adopted strategy was the one of starting from the existent report, to assume an interval for the possible real value of the relevant parameters and then to establish the scenarios (more probable, optimist and pessimist). Based on those sceneries, the considered premises, the modelling and the reliabilities obtained for each one of the variables, the simulations have been made. As results, are presented the medium readiness, MTTFF (Mean Time To First Failure), the number of flaws and the expected costs. The work also displays the sensibility analysis in respect to the time of production of the well. (author)

A comparative analysis of reliability, maintainability and availability for two alternatives of the production submarine systems: ANM and submarine ducts versus BOP and a subsea well testing tree; Analise comparativa da confiabilidade, mantenabilidade e disponibilidade para duas alternativas de sistemas submarino de producao: ANM e dutos submarinos versus BOP e arvore submarina de teste

Energy Technology Data Exchange (ETDEWEB)

Souza, Arlindo Antonio de; Polillo Filho, Adolfo; Santos, Otto Luiz Alcantara [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

This technical article presents a study using the concepts of the Engineering of the Reliability and Risk Analysis with the objective of doing a comparative evaluation of the reliability of two alternative production systems for a marine well: one composed by a wet christmas tree (ANM) producing through underwater ducts (flow lines) and other, usually used in tests of long duration, using a subsea BOP and a subsea well testing tree (AST). The central point of the work was the evaluation of the probability of happening an event considered as critic, denominated 'critical flaw', during the well production life. The work uses one of the procedures and methodologies adopted in the Well Construction Engineering, GERISK, together with four computer applications for data treatment, generation of flaw distribution curves and times of repair, modelling and Monte Carlo simulations. The adopted strategy was the one of starting from the existent report, to assume an interval for the possible real value of the relevant parameters and then to establish the scenarios (more probable, optimist and pessimist). Based on those sceneries, the considered premises, the modelling and the reliabilities obtained for each one of the variables, the simulations have been made. As results, are presented the medium readiness, MTTFF (Mean Time To First Failure), the number of flaws and the expected costs. The work also displays the sensibility analysis in respect to the time of production of the well. (author)

Modeling sub-sea permafrost in the East Siberian Arctic Shelf: the Dmitry Laptev Strait

International Nuclear Information System (INIS)

Nicolsky, D; Shakhova, N

2010-01-01

The present state of sub-sea permafrost modeling does not agree with certain observational data on the permafrost state within the East Siberian Arctic Shelf. This suggests a need to consider other mechanisms of permafrost destabilization after the recent ocean transgression. We propose development of open taliks wherever thaw lakes and river paleo-valleys were submerged shelf-wide as a possible mechanism for the degradation of sub-sea permafrost. To test the hypothesis we performed numerical modeling of permafrost dynamics in the Dmitry Laptev Strait area. We achieved sufficient agreement with the observed distribution of thawed and frozen layers to suggest that the proposed mechanism of permafrost destabilization is plausible.

Development and Testing of a Friction-Based Post-Installable Sensor for Subsea Fiber-Optic Monitoring Systems

Science.gov (United States)

Bentley, Nicole; Brower, David; Le, Suy Q.; Seaman, Calvin; Tang, Henry

2017-01-01

This paper presents the design and development of a friction-based coupling device for a fiber-optic monitoring system that can be deployed on existing subsea structures. This paper provides a summary of the design concept, prototype development, prototype performance testing, and design refinements of the device. The results of the laboratory testing of the first prototype performed at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are included in this paper. Limitations of the initial design were identified and future design improvements were proposed. These new features will enhance the coupling of the device and improve the monitoring system measurement capabilities. A major challenge of a post-installed instrumentation monitoring system is to ensure adequate coupling between the instruments and the structure of interest for reliable measurements. Friction-based coupling devices have the potential to overcome coupling limitations caused by marine growth and soil contamination on subsea structures, flowlines or risers. The work described in this paper investigates the design of a friction-based coupling device (friction clamp), which is applicable for pipelines and structures that are suspended in the water column and those that are resting on the seabed. The monitoring elements consist of fiber-optic sensors that are bonded to a metal clamshell with a high-friction coating. The friction clamp has a single hinge design to facilitate the operation of the clamp and dual rows of opposing fasteners to distribute the clamping force on the structure. The friction clamp can be installed by divers in shallow depths or by remotely operated vehicles in deep-water applications. NASA-JSC was involved in the selection and testing of the friction coating, and in the design and testing of the prototype clamp device. Four-inch diameter and eight-inch diameter sub-scale friction clamp prototypes were built and tested to evaluate the strain

Development and Testing of a Friction-Based Post-Installable Fiber-Optic Monitoring System for Subsea Applications

Science.gov (United States)

Bentley, Nicole L.; Brower, David V.; Le, Suy Q.; Seaman, Calvin H.; Tang, Henry H.

2017-01-01

This paper presents the design and development of a friction-based coupling device for a fiber-optic monitoring system capable of measuring pressure, strain, and temperature that can be deployed on existing subsea structures. A summary is provided of the design concept, prototype development, prototype performance testing, and subsequent design refinements of the device. The results of laboratory testing of the first prototype performed at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are also included. Limitations of the initial concept were identified during testing and future design improvements were proposed and later implemented. These new features enhance the coupling of the sensor device and improve the monitoring system measurement capabilities. A major challenge of a post-installed instrumentation monitoring system is to ensure adequate coupling between the instruments and the structure of interest for reliable measurements. Friction-based devices have the potential to overcome coupling limitations caused by marine growth and soil contamination on flowlines, risers, and other subsea structures. The work described in this paper investigates the design and test of a friction-based coupling device (herein referred to as a friction clamp) which is suitable for pipelines and structures that are suspended in the water column as well as for those that are resting on the seabed. The monitoring elements consist of fiberoptic sensors that are bonded to a stainless steel clamshell assembly with a high-friction surface coating. The friction clamp incorporates a single hinge design to facilitate installation of the clamp and dual rows of opposing fasteners to distribute the clamping force along the structure. The friction clamp can be modified to be installed by commercial divers in shallow depths or by remotely operated vehicles in deep-water applications. NASA-JSC was involved in the selection and testing of the friction coating

Development and Testing of a Friction-Based Post-Installable Sensor for Subsea Fiber-Optic Monitoring System

Science.gov (United States)

Bentley, Nicole L.; Brower, David V.; Le, Suy Q.; Seaman, Calvin H.; Tang, Henry H.

2017-01-01

This paper presents the design and development of a friction-based coupling device for a fiber-optic monitoring system that can be deployed on existing subsea structures. This paper provides a summary of the design concept, prototype development, prototype performance testing, and design refinements of the device. The results of the laboratory testing of the first prototype performed at the National Aeronautics and Space Administration (NASA) Johnson Space Center (JSC) are included in this paper. Limitations of the initial design were identified and future design improvements were proposed. These new features will enhance the coupling of the device and improve the monitoring system measurement capabilities. A major challenge of a post-installed instrumentation monitoring system is to ensure adequate coupling between the instruments and the structure of interest for reliable measurements. Friction-based coupling devices have the potential to overcome coupling limitations caused by marine growth and soil contamination on subsea structures, flowlines or risers. The work described in this paper investigates the design of a friction-based coupling device (friction clamp), which is applicable for pipelines and structures that are suspended in the water column and those that are resting on the seabed. The monitoring elements consist of fiber-optic sensors that are bonded to a metal clamshell with a high-friction coating. The friction clamp has a single hinge design to facilitate the operation of the clamp and dual rows of opposing fasteners to distribute the clamping force on the structure. The friction clamp can be installed by divers in shallow depths or by remotely operated vehicles in deep-water applications. NASA-JSC was involved in the selection and testing of the friction coating, and in the design and testing of the prototype clamp device. Four-inch diameter and eight-inch diameter sub-scale friction clamp prototypes were built and tested to evaluate the strain

Numerical Analysis of Thermal Mixing in a Swirler-Embedded Line-Heater for Flow Assurance in Subsea Pipelines

Directory of Open Access Journals (Sweden)

Jang Min Park

2015-02-01

Full Text Available Flow assurance issue in subsea pipelines arises mainly due to hydrate plugs. We present a new line-heater for prevention of hydrate plug formation in subsea pipelines. The line heater has modular compact design where an electrical heater and a swirl generator are embedded inside the housing pipe so that the stream can be heated efficiently and homogeneously. In this paper, flow and heat transfer characteristics of the line heater are investigated numerically, with a particular emphasis on the mixing effect due to the swirl generator.

Online estimation of wax deposition thickness in single-phase sub-sea pipelines based on acoustic chemometrics: A feasibility study

OpenAIRE

Halstensen, Maths; Arvoh, Benjamin Kaku; Amundsen, Lene; Hoffmann, Rainer

2012-01-01

Wax deposition in sub-sea oil producing pipelines is a concern to the oil producing companies. The deposition of wax in pipelines can cause serious economic implications if not monitored and controlled. Several researchers have developed models and investigated the deposition of wax in crude oil pipelines. As of today, there is no off the shelf instrument available for reliable online estimation of the wax depo- sition thickness in sub-sea pipelines. Acoustic chemometrics was applied to inves...

Failure Mode and Effect Analysis of Subsea Multiphase Pump Equipment

Directory of Open Access Journals (Sweden)

Oluwatoyin Shobowale Kafayat

2014-07-01

Full Text Available Finding oil and gas reserves in deep/harsh environment with challenging reservoir and field conditions, subsea multiphase pumping benefits has found its way to provide solutions to these issues. Challenges such as failure issues that are still surging the industry and with the current practice of information hiding, this issues becomes even more difficult to tackle. Although, there are some joint industry projects which are only accessible to its members, still there is a need to have a clear understanding of these equipment groups so as to know which issues to focus attention on. A failure mode and effect analysis (FMEA is a potential first aid in understanding this equipment groups. A survey questionnaire/interview was conducted with the oil and gas operating company and equipment manufacturer based on the literature review. The results indicates that these equipment’s group are similar with its onshore counterpart, but the difference is the robustness built into the equipment internal subsystems for subsea applications. The results from the manufacturer perspectives indicates that Helico-axial multiphase pump have a mean time to failure of more than 10 years, twin-screw and electrical submersible pumps are still struggling with a mean time to failure of less than 5 years.

Electronic techniques for subsea oil exploration and extraction

Energy Technology Data Exchange (ETDEWEB)

1976-01-01

Subsea oil exploration and extraction is becoming increasingly difficult, costly, and dangerous. Electronics is contributing to make offshore work easier and safer. It is used for positioning ships or oil rigs, for remotely controlling well-heads and tool reentry operations, for pipelaying operations, and for monitoring underwater equipment. It is also tending to replace men in diving operations. The specific achievements of THOMPSON--CSF in this field are described. Fully automated operation of the winches on the ETPM 1601 barge proved successful during a recent pipelaying operation. The technique used by THOMPSON--CSF in this venture allowed a single operator to control all the maneuvers. These are briefly described. (MCW)

Commissioning of long subsea pipelines - environmental aspects

International Nuclear Information System (INIS)

Falck, C.; Kleppe, T.; Maribu, J.

1997-01-01

Discharges to air and sea are inevitable during precommissioning and commissioning of long subsea pipelines. Large quantities of water is pumped through the pipeline during these operations. This water is normally treated with corrosion inhibiting chemicals to minimise internal corrosion of the pipeline. Chemicals like methanol or glycol may be used to prevent hydrate formation, and will normally be discharged to sea during commissioning. In order to minimise the environmental impact of these operations, while maintaining corrosion protection, the Norwegian Statoil has been working for several years along three main routes such as to develop concepts and methods that minimise the discharged volumes, the use of the most environmentally friendly chemicals available, and to monitor and identify the effects of discharges to various marine species. 3 refs., 4 figs

Installation of deep water sub-sea equipment

Energy Technology Data Exchange (ETDEWEB)

Pollack, Jack; Demian, Nabil [SBM-IMODCO Inc., Houston, TX (UNited States)

2004-07-01

Offshore oil developments are being planned in water depths exceeding 2000 m. Lowering and positioning large, heavy sub sea hardware, using conventional methods, presents new technical challenges in these ultra deep waters. In 3000 m a safe lift using conventional steel cables will require more capacity to support the cable self weight than the static payload. Adding dynamic loads caused by the motions of the surface vessel can quickly cause the safe capacity of the wire to be exceeded. Synthetic ropes now exist to greatly reduce the lowering line weight. The lower stiffness of these synthetic ropes aggravate the dynamic line tensions due to vessel motions and relatively little is known about the interaction of these ropes on the winches and sheaves required for pay-out and haul-in of these lines under dynamic load. Usage of conventional winches would damage the synthetic rope and risk the hardware being deployed. Reliable and economic installation systems that can operate from existing installation vessels are considered vital for ultra deep-water oil development. The paper describes a Deep Water Sub-Sea Hardware Deployment system consisting of a buoy with variable, pressure-balanced buoyancy, which is used to offset most of the payload weight as it is lowered. The buoyant capacity is controlled by air pumped into the tank from the surface vessel through a reinforced hose. The buoy and payload motion are isolated from the deployment line surface dynamics using a simple passive heave compensator mounted between the buoy and the bottom of the deployment rope. The system components, functionality and dynamic behavior are presented in the paper. (author)

Improved FTA methodology and application to subsea pipeline reliability design.

Science.gov (United States)

Lin, Jing; Yuan, Yongbo; Zhang, Mingyuan

2014-01-01

An innovative logic tree, Failure Expansion Tree (FET), is proposed in this paper, which improves on traditional Fault Tree Analysis (FTA). It describes a different thinking approach for risk factor identification and reliability risk assessment. By providing a more comprehensive and objective methodology, the rather subjective nature of FTA node discovery is significantly reduced and the resulting mathematical calculations for quantitative analysis are greatly simplified. Applied to the Useful Life phase of a subsea pipeline engineering project, the approach provides a more structured analysis by constructing a tree following the laws of physics and geometry. Resulting improvements are summarized in comparison table form.

Gas hydrate geohazards in shallow sediments and their impact on the design of subsea systems

Energy Technology Data Exchange (ETDEWEB)

Peters, D.; Hatton, G. [Shell Global Solutions Inc., Houston, TX (United States); Mehta, A. [Shell Malaysia Exploration and Production, Sarawak (Malaysia); Hadley, C. [Shell Exploration and Production Inc., Houston, TX (United States)

2008-07-01

This paper described the challenges that exist in producing gas hydrates in deepwater and Arctic environments as a potential source of methane gas. In order to safely produce hydrocarbon reservoirs far beneath near-mudline hydrates, it is important to understand and manage the geohazard risks associated with wells that pass through hydrate-bearing sediments. Since these wells may produce for decades, the temperature of near-mudline sediments may increase above the hydrate dissociation temperature for hundreds of meters from the well. This can result in the release of large quantities of gas causing a volume change that can impact the subsea system in many ways. As the fluids of an underlying reservoir flow to the mudline, heat carried by the fluids warms nearwell sediments and dissociates hydrates, which releases gas that can displace and fracture near well soil. This gas release may be calculated with numerical simulations that model heat and mass transfer in hydrate-bearing sediments. The model simulations require information on the nature and distribution of hydrates within the sediments, the melting behaviour of the hydrates, the thermal and mechanical properties of these shallow sediments, and the amount of hydrates contained in the sediments. However, this information is costly to acquire and characterize with certainty for an offshore development. Therefore, it is important to understand what information, processes, and calculations are needed in order to ensure safe, robust systems to produce the hydrocarbon reservoirs far below the hydrates. It was concluded that the relation between the quantity of gas released and dissociated gas quantities must be well understood. The hydrate concentration is a critical reservoir parameter for reservoirs with severe geohazard risk. 6 refs., 6 figs.

Maintenance optimization for subsea oil pipelines

International Nuclear Information System (INIS)

Castanier, Bruno; Rausand, Marvin

2006-01-01

In this paper, the classical PF interval model, proposed for reliability centered maintenance, is used to optimize the preventive replacement policy of a subsea oil pipeline. The pipeline is subject to failure modes that may lead to oil release and pollution of the sea. The proposed replacement policy is based on regular condition measurements of the quality of an internal pipeline coating (lining). Holes in the coating will expose the pipe material (steel) to a corrosive environment. It is, therefore, important to identify holes in the coating and take action before the corrosion penetrates the pipe wall. The model proposed in the paper can be used to determine the inspection interval that minimizes the average maintenance cost per time unit. The model formulation is outlined and illustrative examples are solved. The mathematical evaluation of the replacement policy requires numerous assumptions. These assumptions have to be tailored to the specific application. The assumptions and the data provided are included for illustrative purposes to exemplify potential results that may be obtained by using the replacement policy

Advanced feed-through systems for in-well optical fibre sensing

International Nuclear Information System (INIS)

Shiach, G; Nolan, A; McAvoy, S; McStay, D; Prel, C; Smith, M

2007-01-01

A new optical fibre feed-through for use in subsea in-well optical fibre sensing systems is reported. The new feed-through is compatible for use with standard subsea Christmas Tree penetrators and allows multiple re-mating of the feed-through over the lifetime of the device. The system has been extensively tested under in-well conditions and found to conform to the performance requirements. The new feed-through is planned to be used in one of the first subsea optical fibre in-well sensing systems

Two-riser system improves drilling at Auger prospect

International Nuclear Information System (INIS)

Gonzalez, R.; Marsh, G.L.; Ritter, P.B.; Mendel, P.E.

1992-01-01

This paper reports on a two-rise system (TRS) for drilling deepwater development wells which eliminates some of the limitations of conventional subsea technology and allows flexibility in well programs. Shell Offshore Inc.'s deep exploratory wells in Garden Banks 426 and 471 have encountered drilling problems that were attributed to limitations in casing sizes imposed by conventional subsea drilling systems. These problems are not uncommon in exploratory deepwater, deep well drilling in the Gulf of Mexico. Reservoir depths of up to 19,500 ft true vertical depth (TVD) and 7-in. production casing requirements led to potentially troublesome and expensive well plans. Because of the constraints placed on the development drilling program by completion requirements and directional drilling, a two-riser system was designed and fabricated. Solving such significant drilling problems has reduced overall development costs

Hydrogen Assisted Crack in Dissimilar Metal Welds for Subsea Service under Cathodic Protection

Science.gov (United States)

Bourgeois, Desmond

Dissimilar metal welds (DMWs) are routinely used in the oil and gas industries for structural joining of high strength steels in order to eliminate the need for post weld heat treatment (PWHT) after field welding. There have been reported catastrophic failures in these DMWs, particularly the AISI 8630 steel - Alloy 625 DMW combination, during subsea service while under cathodic protection (CP). This is due to local embrittlement that occurs in susceptible microstructures that are present at the weld fusion boundary region. This type of cracking is known as hydrogen assisted cracking (HAC) and it is influenced by base/filler metal combination, and welding and PWHT procedures. DMWs of two material combinations (8630 steel -- Alloy 625 and F22 steel -- Alloy 625), produced with two welding procedures (BS1 and BS3) in as welded and PWHT conditions were investigated in this study. The main objectives included: 1) evaluation of the effect of materials composition, welding and PWHT procedures on the gradients of composition, microstructure, and properties in the dissimilar transition region and on the susceptibility to HAC; 2) investigation of the influence of microstructure on the HAC failure mechanism and identification of microstructural constituents acting as crack nucleation and propagation sites; 3) assessment of the applicability of two-step PWHT to improve the resistance to HAC in DMWs; 4) establishment of non-failure criterion for the delayed hydrogen cracking test (DHCT) that is applicable for qualification of DMWs for subsea service under cathodic protection (CP).

Paraffin dispersant application for cleaning subsea flow lines in the deep water Gulf of Mexico cottonwood development

Energy Technology Data Exchange (ETDEWEB)

Jennings, David; White, Jake; Pogoson, Oje [Baker Hughes Inc., Houston, TX (United States); Barros, Dalmo; Ramachandran, Kartik; Bonin, George; Waltrich, Paulo; Shecaira, Farid [PETROBRAS America, Houston, TX (United States); Ziglio, Claudio [Petroleo Brasileiro S.A. (CENPES/PETROBRAS), Rio de Janeiro, RJ (Brazil). Centro de Pesquisa e Desenvolvimento

2012-07-01

This paper discusses a paraffin dispersant (in seawater) application to clean paraffin deposition from a severely restricted 17.4-mile dual subsea flow line system in the Gulf of Mexico Cottonwood development. In principle, dispersant treatments are simple processes requiring effective dispersant packages and agitation to break-up and disperse deposition. Dispersants have been used onshore for treating wax deposition for decades. Implementation of a treatment in a long deep water production system, however, poses numerous challenges. The Cottonwood application was one of the first ever deep water dispersant applications. The application was designed in four separate phases: pre-treatment displacement for hydrate protection, dispersant treatment for paraffin deposition removal, pigging sequence for final flow line cleaning, and post-treatment displacement for hydrate protection. In addition, considerable job planning was performed to ensure the application was executed in a safe and environmentally responsible manner. Two dynamically positioned marine vessels were used for pumping fluids and capturing returns. The application was extremely successful in restoring the deep water flow lines back to near pre-production state. Final pigging operations confirmed the flow lines were cleaned of all restrictions. Significant paraffin deposition was removed in the application. Approximately 900 bbls of paraffin sludge was recovered from the 4000 bbl internal volume flow line loop. Furthermore, the application was completed with zero discharge of fluids. The application provided significant value for the Cottonwood development. It allowed production from wells to be brought on-line at a higher capacity, thereby generating increased revenue. It also allowed resumption of routine pigging operations. As such, the Cottonwood dispersant application illustrates that with proper planning and execution, paraffin dispersant treatments can be highly effective solutions for cleaning

Technology qualification of an ambient pressure subsea cryogenic pipeline for offshore LNG loading and receiving terminals

Energy Technology Data Exchange (ETDEWEB)

Hussain, Afzal; Viteri, Martha; D' Angelo, Luis [Det Norske Veritas (DNV), Rio de Janeiro, RJ (Brazil); Prescott, Neal; Zhang, Jeff [Fluor Corporation, Irving, TX (Brazil)

2009-07-01

A project that deploys new technologies need to be confident that the technology can be implemented successfully and will perform reliably as designed. New technology is critical to industry, especially where such technology is a project enable without the existence of a backup solution, but also for projects where such technologies bring potential benefits such as technical, economic, schedule, and environmental improvements. DNV developed and has been implementing for many years a systematic, risk based technology qualification process as described in DNV RP-A203, qualification procedures for new technology. One of the major objectives of a formal technology qualification process is to ensure that risks are properly addressed. The DNV process includes several levels of technology qualification and review, starting with a statement of feasibility and concluding with a Certificate of Fitness for Service. Fluor Corporation (Fluor) has developed a new subsea cryogenic pipe-in-pipe configuration for offshore LNG loading and receiving terminals. The configuration uses a highly efficient thermal nano-porous insulation in the annular space between the inner and outer pipes. This material is kept in an ambient pressure environment, which is produced through sealing by metal bulkheads. The bulkheads transfer the contraction induced axial compression load on the inner cryogenic carrier pipe to the external jacket pipe. The resulting pipeline bundle is a structural element, which addresses the thermal contraction and expansion loads without the use of expansion bellows or ultra-low thermal contraction alloys. Fluor has followed the DNV technology qualification process to achieve the defined milestones therein which culminated in DNV issuing a certificate of fitness for service. Particular focus was put on the new aspects of the design. The certificate of fitness for service for the Fluor subsea LNG pipe technology provides project management with the confidence that this

Method and system for offshore production of liquefied natural gas; Fremgangsmaate og system for fremstilling av flytendegjort naturgass til havs

Energy Technology Data Exchange (ETDEWEB)

Breivik, K.G.; Fredheim, A.O.; Paurola, P.

1997-01-13

The invention concerns an method and system for offshore production of liquefied natural gas (LNG), wherein natural gas is supplied from an underground source to a subsea production plant. The gas is transferred under a high pressure directly from the production plant to an LNG tanker through a pipeline underwater causing the temperature of the high pressure gas to be lowered to a desired low temperature. This gas is supplied to a conversion plant provided on the LNG tanker and arranged for converting at least a part of the gas to liquid form, and the liquefied gas is transferred to storage tanks on board the same. When the storage tanks are filled up, the pipeline is disconnected from the LNG tanker and connected to another similar tanker. The pipeline is permanently connected to a submerged buoy which is arranged for introduction and releasable securement in a submerged downwardly open receiving space in the tanker, and which is provided with a swivel unit for transfer of gas under a high pressure. 3 figs.

Subsea ice-bearing permafrost on the U.S. Beaufort Margin: 2. Borehole constraints

Science.gov (United States)

Ruppel, Carolyn D.; Herman, Bruce M.; Brothers, Laura L.; Hart, Patrick E.

2016-01-01

Borehole logging data from legacy wells directly constrain the contemporary distribution of subsea permafrost in the sedimentary section at discrete locations on the U.S. Beaufort Margin and complement recent regional analyses of exploration seismic data to delineate the permafrost's offshore extent. Most usable borehole data were acquired on a ∼500 km stretch of the margin and within 30 km of the contemporary coastline from north of Lake Teshekpuk to nearly the U.S.-Canada border. Relying primarily on deep resistivity logs that should be largely unaffected by drilling fluids and hole conditions, the analysis reveals the persistence of several hundred vertical meters of ice-bonded permafrost in nearshore wells near Prudhoe Bay and Foggy Island Bay, with less permafrost detected to the east and west. Permafrost is inferred beneath many barrier islands and in some nearshore and lagoonal (back-barrier) wells. The analysis of borehole logs confirms the offshore pattern of ice-bearing subsea permafrost distribution determined based on regional seismic analyses and reveals that ice content generally diminishes with distance from the coastline. Lacking better well distribution, it is not possible to determine the absolute seaward extent of ice-bearing permafrost, nor the distribution of permafrost beneath the present-day continental shelf at the end of the Pleistocene. However, the recovery of gas hydrate from an outer shelf well (Belcher) and previous delineation of a log signature possibly indicating gas hydrate in an inner shelf well (Hammerhead 2) imply that permafrost may once have extended across much of the shelf offshore Camden Bay.

Experimental and numerical study on coupled motion responses of a floating crane vessel and a lifted subsea manifold in deep water

Directory of Open Access Journals (Sweden)

B.W. Nam

2017-09-01

Full Text Available The floating crane vessel in waves gives rise to the motion of the lifted object which is connected to the hoisting wire. The dynamic tension induced by the lifted object also affects the motion responses of the floating crane vessel in return. In this study, coupled motion responses of a floating crane vessel and a lifted subsea manifold during deep-water installation operations were investigated by both experiments and numerical calculations. A series of model tests for the deep-water lifting operation were performed at Ocean Engineering Basin of KRISO. For the model test, the vessel with a crane control system and a typical subsea manifold were examined. To validate the experimental results, a frequency-domain motion analysis method is applied. The coupled motion equations of the crane vessel and the lifted object are solved in the frequency domain with an additional linear stiffness matrix due to the hoisting wire. The hydrodynamic coefficients of the lifted object, which is a significant factor to affect the coupled dynamics, are estimated based on the perforation value of the structure and the CFD results. The discussions were made on three main points. First, the motion characteristics of the lifted object as well as the crane vessel were studied by comparing the calculation results. Second, the dynamic tension of the hoisting wire were evaluated under the various wave conditions. Final discussion was made on the effect of passive heave compensator on the motion and tension responses.

Subsea Permafrost Mapped Across the U.S. Beaufort Sea Using Multichannel Seismic Data

Science.gov (United States)

Brothers, L.; Hart, P. E.; Ruppel, C. D.

2011-12-01

Circum-Arctic continental shelves at water depths less than ~100 m were subaerial permafrost prior to the onset of sea-level rise starting in the late Pleistocene. Rapid transgression and the resulting temperature increase at the sediment surface have led to thawing of the inundated permafrost, landward retreat of the leading edge of the permafrost, and dissociation of permafrost-associated gas hydrates. Past numerical modeling has shown that gas hydrate dissociation is particularly pronounced at the permafrost-to-no permafrost transition offshore. On the U.S. Beaufort margin, subsea permafrost has never been systematically mapped, and the best insights about permafrost and associated gas hydrate have been based on a limited number of offshore boreholes and numerical studies, with sometimes contrasting predictions of the permafrost's seaward extent. We bring together 5370 km of multichannel seismic (MCS) data acquired during various proprietary exploration industry and public domain government surveys between 1977 and 1992 to map a velocity anomaly diagnostic of submerged permafrost along 500 km of the US Beaufort coastline. These high-velocity (>~2.8 km/s) refractions (HVR), which are evident in prestack MCS shot records, reveal laterally continuous layers of shallow, ice-bonded, coarse-grained sediments beneath the inner continental shelf. The HVR occur in less than 5% of the tracklines, and calculated HVR depths range from 60 to 350 m below seafloor. The velocity anomaly is not observed seaward of the 20 m isobath, and is only found within 30 km of the current shoreline. These results can be used to: 1) create a map of the minimum distribution of remaining US Beaufort shelf subsea permafrost; 2) reconcile discrepancies between model-predicted and borehole-verified offshore permafrost distribution; and 3) constrain where to expect hydrate dissociation.

The role of heat transfer time scale in the evolution of the subsea permafrost and associated methane hydrates stability zone during glacial cycles

Science.gov (United States)

Malakhova, Valentina V.; Eliseev, Alexey V.

2017-10-01

Climate warming may lead to degradation of the subsea permafrost developed during Pleistocene glaciations and release methane from the hydrates, which are stored in this permafrost. It is important to quantify time scales at which this release is plausible. While, in principle, such time scale might be inferred from paleoarchives, this is hampered by considerable uncertainty associated with paleodata. In the present paper, to reduce such uncertainty, one-dimensional simulations with a model for thermal state of subsea sediments forced by the data obtained from the ice core reconstructions are performed. It is shown that heat propagates in the sediments with a time scale of ∼ 10-20 kyr. This time scale is longer than the present interglacial and is determined by the time needed for heat penetration in the unfrozen part of thick sediments. We highlight also that timings of shelf exposure during oceanic regressions and flooding during transgressions are important for simulating thermal state of the sediments and methane hydrates stability zone (HSZ). These timings should be resolved with respect to the contemporary shelf depth (SD). During glacial cycles, the temperature at the top of the sediments is a major driver for moving the HSZ vertical boundaries irrespective of SD. In turn, pressure due to oceanic water is additionally important for SD ≥ 50 m. Thus, oceanic transgressions and regressions do not instantly determine onsets of HSZ and/or its disappearance. Finally, impact of initial conditions in the subsea sediments is lost after ∼ 100 kyr. Our results are moderately sensitive to intensity of geothermal heat flux.

Behavioral responses of Arctica islandica (Bivalvia: Arcticidae) to simulated leakages of carbon dioxide from sub-sea geological storage

International Nuclear Information System (INIS)

Bamber, Shaw D.; Westerlund, Stig

2016-01-01

Highlights: • Valve pumping activity in A. islandica significantly increased at pH 6.2 seawater. • Changes in valve movements were not related to attempted burrowing activities. • Valve activity returned to control levels after 5 days of continuous exposure. • A. islandica tolerate pH reductions likely to follow leakage of sub-sea stored CO_2. - Abstract: Sub-sea geological storage of carbon dioxide (CO_2) provides a viable option for the Carbon Capture and Storage (CCS) approach for reducing atmospheric emissions of this greenhouse gas. Although generally considered to offer a low risk of major leakage, it remains relevant to establish the possible consequences for marine organisms that live in or on sediments overlying these storage areas if such an event may occur. The present study has used a series of laboratory exposures and behavioral bioassays to establish the sensitivity of Arctica islandica to simulated leakages of CO_2. This long-lived bivalve mollusc is widely distributed throughout the North Sea, an area where geological storage is currently taking place and where there are plans to expand this operation significantly. A recently published model has predicted a maximum drop of 1.9 pH units in seawater at the point source of a substantial escape of CO_2 from sub-sea geological storage in this region. Valve movements of A. islandica exposed to reduced pH seawater were recorded continuously using Hall effect proximity sensors. Valve movement regulation is important for optimising the flow of water over the gills, which supplies food and facilitates respiration. A stepwise reduction in seawater pH showed an initial increase in both the rate and extent of valve movements in the majority of individuals tested when pH fell to 6.2 units. Exposing A. islandica to pH 6.2 seawater continuously for seven days resulted in a clear increase in valve movements during the first 40 h of exposure, followed by a gradual reduction in activity intensity over the

Behavioral responses of Arctica islandica (Bivalvia: Arcticidae) to simulated leakages of carbon dioxide from sub-sea geological storage

Energy Technology Data Exchange (ETDEWEB)

Bamber, Shaw D., E-mail: shaw.bamber@iris.no; Westerlund, Stig, E-mail: sw@iris.no

2016-11-15

Highlights: • Valve pumping activity in A. islandica significantly increased at pH 6.2 seawater. • Changes in valve movements were not related to attempted burrowing activities. • Valve activity returned to control levels after 5 days of continuous exposure. • A. islandica tolerate pH reductions likely to follow leakage of sub-sea stored CO{sub 2}. - Abstract: Sub-sea geological storage of carbon dioxide (CO{sub 2}) provides a viable option for the Carbon Capture and Storage (CCS) approach for reducing atmospheric emissions of this greenhouse gas. Although generally considered to offer a low risk of major leakage, it remains relevant to establish the possible consequences for marine organisms that live in or on sediments overlying these storage areas if such an event may occur. The present study has used a series of laboratory exposures and behavioral bioassays to establish the sensitivity of Arctica islandica to simulated leakages of CO{sub 2}. This long-lived bivalve mollusc is widely distributed throughout the North Sea, an area where geological storage is currently taking place and where there are plans to expand this operation significantly. A recently published model has predicted a maximum drop of 1.9 pH units in seawater at the point source of a substantial escape of CO{sub 2} from sub-sea geological storage in this region. Valve movements of A. islandica exposed to reduced pH seawater were recorded continuously using Hall effect proximity sensors. Valve movement regulation is important for optimising the flow of water over the gills, which supplies food and facilitates respiration. A stepwise reduction in seawater pH showed an initial increase in both the rate and extent of valve movements in the majority of individuals tested when pH fell to 6.2 units. Exposing A. islandica to pH 6.2 seawater continuously for seven days resulted in a clear increase in valve movements during the first 40 h of exposure, followed by a gradual reduction in activity

Challenges and solutions for manifold gas well production in Mexilhao field; Desafios e solucoes para a producao de pocos de gas interligados por manifold no Campo de Mexilhao

Energy Technology Data Exchange (ETDEWEB)

Lorenzeti, Jorge Fernando Canato; Silva, Haroldo Benedito da [Petroleo Brasileiro S.A. (PETROBRAS), Rio de Janeiro, RJ (Brazil)

2012-07-01

This work presents the main challenges and the solutions found in the development of the Mexilhao Gas Field, located in the Santos Basin, about 145 kilometers off the Brazilian coast. Many technological innovations were devised for the subsea system, such as the use of subsea control valves in the manifold (for monoethylene glycol, MEG, injection), the use of HIPPS (High Integrity Pipeline Protection System) and the thermal insulation of the Wet Christmas Tree (WCT). It is also presented the sequence of the interlocking protection logic and the results observed during production. The cooling down of the WCT block after a stop production is showed. This is very important feature in this project for mitigating hydrate formation and allowing a higher operational flexibility during the restarting of production. The good simulation results by OLGA are also presented and they are compared to the real thermal-hydraulic profile data observed during the restart. The correct timing of this operation is essential to ensure not only that the overpressure protection logic is not triggered during the restart, but to prevent very low temperatures downstream of the choke (Joule-Thompson effect). (author)

Hysteresis of methane hydrate formation/decomposition at subsea geological conditions

International Nuclear Information System (INIS)

Klapproth, Alice; Piltz, Ross; Peterson, Vanessa K.; Kennedy, Shane J.; Kozielski, Karen A.; Hartley, Patrick G.

2009-01-01

Full text: Gas hydrates are a major risk when transporting oil and gas in offshore subsea pipelines. Under typical conditions in these pipelines (at high pressure and low temperature) the formation of gas hydrates is favourable. The hydrates form large solid plugs that can block pipelines and can even cause them to burst. This represents a major problem for the gas mining industry, which currently goes to extreme measures to reduce the risk of hydrate formation because there is no reliable experimental data on hydrate processes. The mechanisms of gas hydrate formation, growth and inhibition are poorly understood. A clear understanding of the fundamental processes will allow development of cost effective technologies to avoid production losses in gas pipelines. We are studying the nucleation of the methane hydrates by measuring the hysteresis of hydrate formation/decomposition by neutron diffraction. When a gas hydrate is decomposed (melted) the resulting water has a 'supposed memory effect' raising the probability of rapid hydrate reformation. This rapid reformation does not occur for pure water where nucleation can be delayed by several hours (induction time) due to metastability [1]. The memory effect can only be destroyed by extreme heating of the effected area. Possible causes of this effect include residual water structure, persistent hydrate crystal lites remaining in solution and remaining dissolved gas. We will compare the kinetics of formation and the stability region of hydrate formation of 'memory' water for comparison with pure water. This information has important implications for the oil and gas industry because it should provide a better understanding of the role of multiple dissociation and reformation of gas hydrates in plug formation.

Buyer-Supplier Collaboration in New Product Development - Reduction of Ramp-up time for high-tech products

OpenAIRE

Nielsen, Halvor Eid

2015-01-01

Product development has always been a key activity to gain competitive advantage. Especially in technology based industry, such as the maritime subsea industry. Due to increasing globalization and high competition from low cost countries, companies need to streamline the supply chain and development in order to get new product out on the market fast and efficient. Involving suppliers in the development have shown great effect on reduced development time and cost while increasing quality of...

Phase behaviour in water/hydrocarbon mixtures involved in gas production systems; etude des equilibres des systemes: eau-hydrocarbures-gaz acides dans le cadre de la production de gaz

Energy Technology Data Exchange (ETDEWEB)

Chapoy, A.

2004-11-15

Inside wells, natural gases frequently coexist with water. The gases are in equilibrium with the sub-adjacent aquifer. Many problems are associated with the presence of water during the production, transport and processing of natural gases. Accurate knowledge of the thermodynamic properties of the water/hydrocarbon and water-inhibitor/hydrocarbon equilibria near the hydrate forming conditions, at sub-sea pipeline conditions and during the transport is crucial for the petroleum industry. An apparatus based on a static/analytic method combined with a dilutor apparatus to calibrate on the gas chromatograph (GC) detectors with water was used to measure the water content of binary systems (i.e.: water - methane, ethane - water, nitrogen - water...) as well of a synthetic hydrocarbon gas mixture (i.e.: 94% methane, 4% ethane and 2% n-butane) with and without inhibitor. This same apparatus was also used generate data of methane, ethane, propane, n-butane and nitrogen solubility in water and also the solubilities of a synthetic mixture in water. In-house software has been developed in order to fit and model the experimental data. (author)

Anchoring FRP Composite Armor in Flexible Offshore Riser Systems

DEFF Research Database (Denmark)

Costache, Andrei

things, they serve for the transportation of hydrocarbons from the subsea facilities to the production and drilling equipment at the sea surface. Flexible risers are the prime choice for connecting floating production, storage and offloading facilities, because they are specially designed for dynamic...... counterpart. A new double grip design with flat faces is proposed, in which the loads are transferred through friction. The behavior of such grip is studied by means of experimental testing and finite element modeling. Several iterations of the grip system were evaluated over the course of the project...

Slug control system; Sistema de controle de golfadas

Energy Technology Data Exchange (ETDEWEB)

Borges Filho, Alvaro de Miranda; Meira, Marco Antonio Alves de; Vaz, Celio Eduardo Martins [PETROBRAS, Macae, RJ (Brazil). Unidade de Negocios da Bacia de Campos

2004-07-01

Due to the characteristics of flow, gas can separate from oil in the pipelines and risers that link subsea manifolds to production offshore platforms, forming liquid and gas slugs in the production separator. Liquid slugs can cause overflow in the separators. Gas slugs can cause burning in the flare due to the limitation in the turbo-compressors acceleration. In both cases the consequences are loss of production or shut-downs. This paper presents a Slug Control System designed to attenuate severe gas and liquid flow variations. The system consist of a control valve installed in the separator inlet, transmitters, a controller, control algorithm and a monitoring station. This system is operating since October 2003 in a production offshore platform, in Campus Basin, Brazil, with excellent results, reducing the gas burning in 45% without oil production loss. (author)

Modelling and assessment of accidental oil release from damaged subsea pipelines.

Science.gov (United States)

Li, Xinhong; Chen, Guoming; Zhu, Hongwei

2017-10-15

This paper develops a 3D, transient, mathematical model to estimate the oil release rate and simulate the oil dispersion behavior. The Euler-Euler method is used to estimate the subsea oil release rate, while the Eulerian-Lagrangian method is employed to track the migration trajectory of oil droplets. This model accounts for the quantitative effect of backpressure and hole size on oil release rate, and the influence of oil release rate, oil density, current speed, water depth and leakage position on oil migration is also investigated in this paper. Eventually, the results, e.g. transient release rate of oil, the rise time of oil and dispersion distance are determined by above-mentioned model, and the oil release and dispersion behavior under different scenarios is revealed. Essentially, the assessment results could provide a useful guidance for detection of leakage positon and placement of oil containment boom. Copyright © 2017 Elsevier Ltd. All rights reserved.

Evolution of umbilicals in Brazil: optimizing deepwater umbilical applications with thermoplastic hoses and steel tubes

Energy Technology Data Exchange (ETDEWEB)

Guerra Neto, Mauro Del [DuPont do Brasil S.A., Barueri, SP (Brazil)

2008-07-01

Subsea umbilicals in the past 25 years have evolved in parallel with other subsea oil and gas technologies, as the search for hydrocarbons needed to drive the global economy has led offshore exploration and development companies to seek reserves ever-farther from shore in water thousands of meters deep. Relegated to little more than afterthought status before the push into deep water, modern umbilicals have now become crucial components linking deep water producers to their subsea wells, controlling subsea production systems through hydraulic and electrical power and injecting production chemicals for corrosion-, scale-, and hydrate-inhibition at subsea well heads. Particularly in subsea developments involving several deep water wells, umbilicals today are integral to both the production-system design and the chosen operating strategy. Failure of an umbilical linking a subsea well head in deep water to a host production facility can inflict severe economic consequences upon an operator by impairing production operations or halting production altogether. The additional cost of repairing or replacing a failed umbilical can run into the millions of dollars. As offshore oil and gas production has moved into ever-deeper water, umbilical manufacturers have begun introducing new stronger materials to handle the inherently higher pressures and temperatures. Today, two types of construction are used for fluid conduits in umbilical systems deployed in deep water: thermoplastic hoses and steel tubes. Steel tubes are generally more expensive than thermoplastic hoses, relatively stiff and considered to have high tensile strength, while thermoplastic hoses are extremely flexible and exhibit lower tensile strength. This lower tensile strength of the hoses may be compensated by including steel wire armoring in the umbilical. This also provides the added benefits of additional mechanical protection compared with the equivalent unarmored steel-tubes umbilicals. When either

A fuzzy controller for the VASPS (Vertical Annular Separation and Pumping System) subsea separation and pumping system; Um controlador fuzzy para o sistema de separacao e bombeamento submarino - VASP (Vertical Annular Separation and Pumping System)

Energy Technology Data Exchange (ETDEWEB)

Teixeira, Alex F.; Mendes, Jose Ricardo P.; Morooka, Celso K. [Universidade Estadual de Campinas, SP (Brazil). Faculdade de Engenharia Mecanica. Dept. de Engenharia de Petroleo; Estevam, Valdir [PETROBRAS, Rio de Janeiro, RJ (Brazil); Guilherme, Ivan R. [UNESP, Rio Claro, SP (Brazil). Inst. de Geociencias e Ciencias Exatas. Dept. de Estatistica, Matematica Aplicada e Computacao; Rigo, Jose Eduardo [Centro Federal de Educacao Tecnologica no Espirito Santo (CEFETES), Vitoria, ES (Brazil)

2004-07-01

In this paper the designs of a fuzzy controller for the VASPS (Vertical Annular Separation and Pumping System) liquid level and separation pressure control are presented, as well as a simulation of its work to evaluate the performance of the controller designed. The VASPS is a two-phase subsea separation and pumping system, which is made up of a separation vessel, where the mixture (liquid and gas) enters and suffers the separation process through three levels, the expansion chamber, the helix and the pool. The liquid inside the pool is taken to the platform using a pump that with a choke control the pool liquid level. The pool liquid level control is necessary because if the level exceeds the maximum value allowed, the liquid can invade the space occupied by the helix and hinder the separation process. An the other hand if the level is below the minimum allowed the pump can be damaged. The separation pressure control is important for operational security and efficiency issues, because when we keep the separation pressure near an optimum value we are maximizing its efficiency. With the controller and the simulator, many simulations of the work of system were made to get results that could be used to evaluate if the designed controller solved the problem and if its performance were satisfactory. After, a PID control system was designed to be used as comparison with the results obtained with the fuzzy controller, since the PID is widely used in the industrial environment. (author)

Investment in exploration-production and refining 2013

International Nuclear Information System (INIS)

Hureau, Geoffroy; Serbutoviez, Sylvain; Silva, Constancio; Maisonnier, Guy

2013-10-01

IFPEN analyses in this study the 2013 evolution of global investment in the field of exploration-production and refining. 1 - Changes in oil and gas prices; 2 - Exploration production: a new year of growth: the increase in investments continues into 2013, exploration - Discoveries in 2013, 1978 - 2012: Investments - Production - Price; 3 - Main markets in the upstream oil equipment and services sector: introduction, drilling (Drilling activity, Number of wells drilled throughout the world, Number of onshore wells, Number of offshore wells, Drilling markets, equipment and services for wells, Onshore drilling market, Offshore drilling market, Fracking market); Geophysical market (Geophysical activity, Geophysical market); Offshore construction (Offshore construction activities, Fixed platforms (Jack-ups), Floating Platform Systems (FPS), Sub-sea constructions, Offshore construction market); Conclusion; 4 - Refining: looking for new equilibriums: falling excess capacity and regional disparities, recovery in capital spending in emerging countries, Asia is still the eldorado for investment in the downstream oil Sector (Continuing overcapacity in the medium-term, Differing investment strategies)

30 CFR 250.288 - When and how must I submit the Conceptual Plan?

Science.gov (United States)

2010-07-01

..., or one hard copy and one electronic version, of the Conceptual Plan to the Regional Director after... the well safety control system or subsea production systems to be used after well completion. ...

Application of low density from pig in subsea satellite well flow line; Utilizacao de pig-espuma de baixa densidade em linhas de producao de pocos-satelites submersos

Energy Technology Data Exchange (ETDEWEB)

Lima, Paulo Cesar Ribeiro; Couto, Nilton Castro; Souza, Robson Oliveira [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas. Divisao de Explotacao

1995-01-01

This work describes a new concept of pigging using low density form to prevent/removal of wax in subsea satellite well flowline. The methodology of wax control is world pioneer. The pigs are sent through a 2.5 in lift gas line, and through a wet x-mas tree, not designed to be pigged, and back through the flowline. (author) 2 refs., 1 fig.

Evolution of the Macondo well blowout: simulating the effects of the circulation and synthetic dispersants on the subsea oil transport.

Science.gov (United States)

Paris, Claire B; Hénaff, Matthieu Le; Aman, Zachary M; Subramaniam, Ajit; Helgers, Judith; Wang, Dong-Ping; Kourafalou, Vassiliki H; Srinivasan, Ashwanth

2012-12-18

During the Deepwater Horizon incident, crude oil flowed into the Gulf of Mexico from 1522 m underwater. In an effort to prevent the oil from rising to the surface, synthetic dispersants were applied at the wellhead. However, uncertainties in the formation of oil droplets and difficulties in measuring their size in the water column, complicated further assessment of the potential effect of the dispersant on the subsea-to-surface oil partition. We adapted a coupled hydrodynamic and stochastic buoyant particle-tracking model to the transport and fate of hydrocarbon fractions and simulated the far-field transport of the oil from the intrusion depth. The evaluated model represented a baseline for numerical experiments where we varied the distributions of particle sizes and thus oil mass. The experiments allowed to quantify the relative effects of chemical dispersion, vertical currents, and inertial buoyancy motion on oil rise velocities. We present a plausible model scenario, where some oil is trapped at depth through shear emulsification due to the particular conditions of the Macondo blowout. Assuming effective mixing of the synthetic dispersants at the wellhead, the model indicates that the submerged oil mass is shifted deeper, decreasing only marginally the amount of oil surfacing. In this scenario, the oil rises slowly to the surface or stays immersed. This suggests that other mechanisms may have contributed to the rapid surfacing of oil-gas mixture observed initially. The study also reveals local topographic and hydrodynamic processes that influence the oil transport in eddies and multiple layers. This numerical approach provides novel insights on oil transport mechanisms from deep blowouts and on gauging the subsea use of synthetic dispersant in mitigating coastal damage.

UK North Sea Strathspey Field development: How use of a satellite tie-back to a third party host created a ''win-win'' situation

International Nuclear Information System (INIS)

Cheifetz, S.A.; Hale, J.E.

1994-01-01

The Texaco operated Strathspey Field lies in the Northern Sector of the UK North Sea. Development options for the 150 million barrel oil equivalent field included use of a fixed platform, floating production system and sub-sea tieback to an existing platform. Decision Analysis was used to examine the risk profile of the different options. The choice of a subsea tieback to the Chevron operated Ninian Field (North ampersand South Platforms) created economic benefits for partners in both fields as compared to the use of a stand-alone development for Strathspey

Economic benefits of subsea flexible flowlines

International Nuclear Information System (INIS)

Hill, R.T.; Measamer, J.C.

1993-01-01

The development of marginal off-shore hydrocarbon deposits has resulted in production of increasingly corrosive fluids, thus furthering the need for pipelines capable of operating at elevated temperatures in the presence of high concentrations of H 2 S and CO 2 gases. Conventional pipelines require the use of stainless steels or other corrosion resistant alloys which drives up the cost of materials and fabrication/installation of the system. The use of flexible pipe is assuming an important role in these applications where the selection of compatible metallic and non-metallic components have resulted in cost effective alternatives. As development of marginal and aggressive hydrocarbon reservoirs increases operators are faced with providing systems which minimize the cost of field production. This paper describes the results of economic analyses of actual field developments in order to provide a methodology for selection of an appropriate pipeline technology to minimize life cycle costs of the flowline system

A remote and autonomous continuous monitoring ultrasonic system for flood detection in sub-sea members of offshore steel oil rigs

Energy Technology Data Exchange (ETDEWEB)

Mijarez-Castro, Rito

2006-07-01

This thesis presents a novel and autonomous continuous monitoring system for flood detection in the hollow sub-sea members of offshore steel oil rigs. The technique offers an alternative to underwater nondestructive testing methods based on ultrasound and x-rays, which have been used to detect the presence of seawater in these applications, often with divers or remote operating vehicles. The research consists of theoretical and experimental work necessary for the development of an integral system that can be used in new fixed offshore oil rig designs. The system employs a single piezoelectric transducer which can be permanently attached to the inner wall of every sub-sea structure and which is powered by a normally inert seawater battery. Upon activation, the sensor transmits ultrasonic chirp or tone encoded pulses in the range of 21 k Hz to 42 k Hz, to a monitoring system at deck level for decoding and identifying flooded members. Two approaches to the system were considered during the investigation, depending on the communication channel exploited. These were based on either using the seawater as a propagation medium or using the steel structure as a wave-guide. A system based on theoretical models was built and field experiments were conducted using a purpose built jointed steel pipe structure, 7 m in length, 0.5 m in diameter and 16 mm in thickness. This structure was flooded by complete immersion in seawater. Results obtained using water as communication medium and a frequency in the order of 38 k Hz yielded an attenuation figure of 0.4 d B m{sub -}1 over 100 m, since losses were predominantly geometric. In contrast, using the tubular structure as a wave-guide and axis symmetric guided waves as the excitation, a gross attenuation figure of 1.3 d B m{sub -}1 was attained. In the straight parts of the structure, the attenuation ranged from 0.3 d B m{sub -} 1 to 0.6 d B m{sub -}1. The modes most likely to have been excited within the structure were L(0,5) - L(0

Design and Calibration of a Full-Scale Active Magnetic Bearing-Based Test Facility for Investigating Rotordynamic Properties of Turbomachinery Seals in Multiphase Flow

DEFF Research Database (Denmark)

Voigt, Andreas Jauernik; Mandrup-Poulsen, Christian; Nielsen, Kenny

2017-01-01

The recent move towards subsea oil and gas production brings about a requirement to locate process equipment in deepwater installations. Furthermore, there is a drive towards omitting well stream separation functionality, as this adds complexity and cost to the subsea installation. This in turn...... leads to technical challenges for the subsea installed pumps and compressors that are now required to handle multiphase flow of varying gas to liquid ratios. This highlights the necessity for a strong research focus on multiphase flow impact on rotordynamic properties and thereby operational stability...... University of Denmark and Lloyd's Register Consulting are currently establishing a purpose built state of the art multiphase seal test facility. This paper provides details on the design of the novel test facility and the calibration of the Hall sensor system employed to measure AMB forces. Calibration...

Diverless maintenance in deep water

Energy Technology Data Exchange (ETDEWEB)

Hals, B.E. [Oceaneering International Services, (United Kingdom)

1996-12-31

The topic of diverless maintenance will address subsea production facilities in this paper. The major factors that determine diverless maintainability are development economics, maintenance philosophy, subsea hardware design, subsea intervention hardware, and compatibility of subsea hardware and remote work capabilities. The opportunity for developing and implementing low cost diverless installable and maintenable subsea facilities exist. Designs, hardwares, and procedures exist althoughmany of these have been combined into powerful solutions. This paper addresses the issues that need to be considered and provides one set of solutions. There are a number of other solutions that can be combined in a different set to provide a parallel but different solution. The challenge is to establish a process that defines the requirement, identifies the resources/capabilities, executes the work. 3 refs., 10 figs.

Collision Detection for Underwater ROV Manipulator Systems

Directory of Open Access Journals (Sweden)

Satja Sivčev

2018-04-01

Full Text Available Work-class ROVs equipped with robotic manipulators are extensively used for subsea intervention operations. Manipulators are teleoperated by human pilots relying on visual feedback from the worksite. Operating in a remote environment, with limited pilot perception and poor visibility, manipulator collisions which may cause significant damage are likely to happen. This paper presents a real-time collision detection algorithm for marine robotic manipulation. The proposed collision detection mechanism is developed, integrated into a commercial ROV manipulator control system, and successfully evaluated in simulations and experimental setup using a real industry standard underwater manipulator. The presented collision sensing solution has a potential to be a useful pilot assisting tool that can reduce the task load, operational time, and costs of subsea inspection, repair, and maintenance operations.

Behavior and dynamics of bubble breakup in gas pipeline leaks and accidental subsea oil well blowouts.

Science.gov (United States)

Wang, Binbin; Socolofsky, Scott A; Lai, Chris C K; Adams, E Eric; Boufadel, Michel C

2018-06-01

Subsea oil well blowouts and pipeline leaks release oil and gas to the environment through vigorous jets. Predicting the breakup of the released fluids in oil droplets and gas bubbles is critical to predict the fate of petroleum compounds in the marine water column. To predict the gas bubble size in oil well blowouts and pipeline leaks, we observed and quantified the flow behavior and breakup process of gas for a wide range of orifice diameters and flow rates. Flow behavior at the orifice transitions from pulsing flow to continuous discharge as the jet crosses the sonic point. Breakup dynamics transition from laminar to turbulent at a critical value of the Weber number. Very strong pure gas jets and most gas/liquid co-flowing jets exhibit atomization breakup. Bubble sizes in the atomization regime scale with the jet-to-plume transition length scale and follow -3/5 power-law scaling for a mixture Weber number. Copyright © 2018 Elsevier Ltd. All rights reserved.

Wireless subsea. Traadloest under vann

Energy Technology Data Exchange (ETDEWEB)

Kvistad, Oe

1993-01-01

The article deals with a Norwegian developed acoustic telemetry link designed for the transmission of data to and from underwater production control systems offshore. The acoustic link is designed for operation in maximum water depths of 500 m, and it has a reach capacity of 10 km. All the electric and hydraulic power is generated locally by means of a seawater battery and an hydraulic power generator. The operation control of valves, and the reading of the status of valves and battery together with sensor values are done by transmitting the acoustic signals via the link to a control system onboard a platform. 1 fig.

Review of the Factors that Influence the Condition of Wax Deposition in Subsea Pipelines

Directory of Open Access Journals (Sweden)

Koh Junyi

2018-03-01

Full Text Available When crude oil is transported via sub-sea pipeline, the temperature of the pipeline decreases at a deep depth which causes a difference in temperature with the crude oil inside. This causes the crude oil to dissipate its heat to the surrounding until thermal equilibrium is achieved. This is also known as the cloud point where wax begins to precipitate and solidifies at the walls of the pipeline which obstruct the flow of fluid. The main objective of this review is to quantify the factors that influence wax deposition such as temperature difference between the wall of the pipeline and the fluid flowing within, the flow rate of the fluid in the pipeline and residence time of the fluid in the pipeline. It is found the main factor that causes wax deposition in the pipeline is the difference in temperature between the petroleum pipeline and the fluid flowing within. Most Literature deduces that decreasing temperature difference results in lower wax content deposited on the wall of the pipeline. The wax content increases with rising flow rate. As for the residence time, the amount of deposited wax initially increases when residence time increases until it reaches a peak value and gradually decreases. Flow-loop system and cold finger apparatus were used in literature investigations to determine the trends above. Three new models are generated through a regression analysis based on the results from other authors. These new models form a relationship between temperature difference, flow rate, residence time and Reynolds number with wax deposition. These models have high values of R-square and adjusted R-square which demonstrate the reliability of these models.

The copper cabel is not dead

Energy Technology Data Exchange (ETDEWEB)

Knutsen, Jan Grove

2010-07-01

It has for a long time been used old and proprietary communication solutions from vessel to subsea solutions, and between subsea installations. This has changed the last few years since standard industrial products are good enough to be in subsea installations. The biggest change is that Ethernet is used in most applications, and all Ethernet communication is based on open standards(IEEE). Since this now is standard equipment it means cost reduction and easy available support and products. This paper will describe how today's products make it possible to use old copper cables with today's technology. With this new technology it is possible to build advanced networks where you can benefit from redundancy functions and monitoring of your network. (Author)

Geochemical monitoring for detection of CO_{2} leakage from subsea storage sites

Science.gov (United States)

García-Ibáñez, Maribel I.; Omar, Abdirahman M.; Johannessen, Truls

2017-04-01

Carbon Capture and Storage (CCS) in subsea geological formations is a promising large-scale technology for mitigating the increases of carbon dioxide (CO2) in the atmosphere. However, detection and quantification of potential leakage of the stored CO2 remains as one of the main challenges of this technology. Geochemical monitoring of the water column is specially demanding because the leakage CO2 once in the seawater may be rapidly dispersed by dissolution, dilution and currents. In situ sensors capture CO2 leakage signal if they are deployed very close to the leakage point. For regions with vigorous mixing and/or deep water column, and for areas far away from the leakage point, a highly sensitive carbon tracer (Cseep tracer) was developed based on the back-calculation techniques used to estimate anthropogenic CO2 in the water column. Originally, the Cseep tracer was computed using accurate discrete measurements of total dissolved inorganic carbon (DIC) and total alkalinity (AT) in the Norwegian Sea to isolate the effect of natural submarine vents in the water column. In this work we assess the effect of measurement variables on the performance of the method by computing the Cseep tracer twice: first using DIC and AT, and second using partial pressure of CO2 (pCO2) and pH. The assessment was performed through the calculation of the signal to noise ratios (STNR). We found that the use of the Cseep tracer increases the STNR ten times compared to the raw measurement data, regardless of the variables used. Thus, while traditionally the pH-pCO2 pair generates the greatest uncertainties in the oceanic CO2 system, it seems that the Cseep technique is insensitive to that issue. On the contrary, the use of the pCO2-pH pair has the highest CO2 leakage detection and localization potential due to the fact that both pCO2 and pH can currently be measured at high frequency and in an autonomous mode.

System solutions for deepwater development : an overview from the US Gulf of Mexico

International Nuclear Information System (INIS)

Winkler, M.M.; Arnold, P.

1998-01-01

The U.S. Gulf of Mexico is one of the world's dominant offshore petroleum production areas which has seen a renaissance over the past four years due to successful exploration and production activities. The different solutions used in deepwater development in that area are discussed. Much of the success in the area can be attributed to technology improvements and to geologic conditions. The economics have been enhanced by the existence of world-class reservoirs which deliver high well rates and yield high per-well recovery volumes. Recent deepwater activity in the Gulf is reviewed and the major differences between development system types are described. The strong pipeline transportation network and Gulf Coast products market are also reviewed. The industry's future prospects and the factors for continued success, such as extended reach drilling, extending subsea offset, reduced exploration well costs, low margin drilling conditions, new riser system designs, local government impact, and the impact of health, safety and environmental issues round out the discussion. 1 tab., 9 figs

Challenges and solutions for installing an intelligent completion in offshore deepwater Brazil

Energy Technology Data Exchange (ETDEWEB)

Reyes, Alfonso R. [WellDynamics, Spring, TX (United States); Arias, Jose Luiz [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2004-07-01

This paper describes an atypical and challenging Intelligent Well Completion (IWC) installed in ultra deep water (1500-2000 m), offshore Brazil. The well is a water injector designed to selectively control the injection flow rate in to two stacked gravel pack zones. The field is Roncador, approximately 150 kilometers offshore the North-Eastern coast of the state of Rio de Janeiro, Brazil. This application is an atypical IWC due to the long distance ({approx}15 Km) from the production platform to the well. Intelligent wells have been installed at such distances previously but never with a direct control umbilical. Previous completions used a Subsea Control Module (SCM) or pod located in the wellhead. Reduced intervention costs are the typical driver for IWC in deep water applications, but water management is becoming an increasingly common application. The Roncador field development team has taken a novel approach by using IWC to manage water injection in an ultra deep water development. The challenge for the project team was to design an IWC system, which would accommodate the field infrastructure constraint, require minimal modification to the existing subsea hardware and ensure the necessary flexibility to locate surface equipment without the need for modification to the production facilities. The solution adopted for Roncador 35 is mainly based on an emerging ISO standard for the integration of IWC into Subsea Production Systems. The modular and expandable approach will enable extension of this solution to other wells in the Roncador field. (author)

Investment in exploration-production and refining 2014

International Nuclear Information System (INIS)

Hureau, Geoffroy; Serbutoviez, Sylvain; Silva, Constancio; Maisonnier, Guy

2014-11-01

IFPEN analyses in this study the 2014 evolution of global investment in the field of exploration-production and refining: 1 - Changes in oil and gas prices: General background: weak economy and global disorder, Oil prices: fundamentals that could help to relax oil prices?, Gas prices: fall in Europe, stability in Japan, increase in the US; 2 - Exploration and production - Slowdown in growth: moderate rise in investment in 2014, exploration - Discoveries in 2014, Russia: sanctions will have limited short term impact, implications of the reforms to the Mexican energy sector; 3 - Drilling activity and market throughout the world: onshore and offshore drilling (Number of wells drilled throughout the world, Number of onshore wells, Number of offshore wells, Drilling, equipment and well services markets, Onshore drilling market, Offshore drilling market, Fracking market), Geophysical activity and the geophysical market, Offshore construction activity and the offshore construction market (Offshore construction activities, Rig construction activity, Floating Platform Systems (FPS), Sub-sea constructions, Offshore construction market); 4 - Refining - Significant increase in spending: increase in industrial costs, a slowdown in the increase in excess capacity in the future?, A bleak future for the european refining sector

Simplified Technique for Predicting Offshore Pipeline Expansion

Science.gov (United States)

Seo, J. H.; Kim, D. K.; Choi, H. S.; Yu, S. Y.; Park, K. S.

2018-06-01

In this study, we propose a method for estimating the amount of expansion that occurs in subsea pipelines, which could be applied in the design of robust structures that transport oil and gas from offshore wells. We begin with a literature review and general discussion of existing estimation methods and terminologies with respect to subsea pipelines. Due to the effects of high pressure and high temperature, the production of fluid from offshore wells is typically caused by physical deformation of subsea structures, e.g., expansion and contraction during the transportation process. In severe cases, vertical and lateral buckling occurs, which causes a significant negative impact on structural safety, and which is related to on-bottom stability, free-span, structural collapse, and many other factors. In addition, these factors may affect the production rate with respect to flow assurance, wax, and hydration, to name a few. In this study, we developed a simple and efficient method for generating a reliable pipe expansion design in the early stage, which can lead to savings in both cost and computation time. As such, in this paper, we propose an applicable diagram, which we call the standard dimensionless ratio (SDR) versus virtual anchor length (L A ) diagram, that utilizes an efficient procedure for estimating subsea pipeline expansion based on applied reliable scenarios. With this user guideline, offshore pipeline structural designers can reliably determine the amount of subsea pipeline expansion and the obtained results will also be useful for the installation, design, and maintenance of the subsea pipeline.

Permanent underwater leak detector

International Nuclear Information System (INIS)

Costello, L; McStay, D; Moodie, D; Kane, D

2009-01-01

A new optoelectronic sensor for the real time monitoring of key components such as valves and connectors within the subsea production equipment for leaks of hydraulic fluid is reported. The sensor is capable of detecting low concentrations of such fluids, allowing the early detection of small leaks, and the ability to monitor the evolution of the leak-rate with time, hence providing an important new tool in complying with environmental requirements, enabling early intervention and optimising subsea production

Severe Slugging in Air-Water Hybrid Riser System

Directory of Open Access Journals (Sweden)

Jing Gong

2014-11-01

Full Text Available In the subsea pipeline gathering system, severe slugging flow is prone to occur. Severe slugging flow brings major threat to production and flow assurance in oil and gas industry due to periodical pressure oscillation and large liquid volume. Currently many researchers pay much more attention on L-shaped riser, catenaries, and S-shaped riser; little research has been made on hybrid riser, which is applied in the Africa West and Gulf of Mexico oil fields. Flow characteristics simulation for hybrid riser is made in this paper, using the one-dimensional and quasi-equilibrium model to simulate not only the riser-base pressure, severe slugging period, and the liquid slug length of the whole system but also base-pressure in the flexible pipe section. The calculated results match well with the experiment data. Besides, the influence of flexible pipe to the severe slugging characteristics of hybrid riser system is analyzed, which are significant for the determination of riser structure.

Predicting scour beneath subsea pipelines from existing small free span depths under steady currents

Directory of Open Access Journals (Sweden)

Jun Y. Lee

2017-06-01

Full Text Available An equation was developed to predict current-induced scour beneath subsea pipelines in areas with small span depths, S. Current equations for scour prediction are only applicable to partially buried pipelines. The existence of small span depths (i.e. S/D < 0.3 are of concern because the capacity for scour is higher at smaller span depths. Furthermore, it is impractical to perform rectification works, such as installing grout bags, under a pipeline with a small S/D. Full-scale two-dimensional computational fluid dynamics (CFD simulations were performed using the Reynolds-averaged Navier–Stokes approach and the Shear stress transport k–ω turbulence model. To predict the occurrence of scour, the computed maximum bed shear stress beneath the pipe was converted to the dimensionless Shields parameter, and compared with the critical Shields parameter based on the mean sediment grain size. The numerical setup was verified, and a good agreement was found between model-scale CFD data and experimental data. Field data were obtained to determine the mean grain size, far field current velocity and to measure the span depths along the surveyed pipe length. A trend line equation was fitted to the full-scale CFD data, whereby the maximum Shields parameter beneath the pipe can be calculated based on the undisturbed Shields parameter and S/D.

Using industry ROV videos to assess fish associations with subsea pipelines

Science.gov (United States)

McLean, D. L.; Partridge, J. C.; Bond, T.; Birt, M. J.; Bornt, K. R.; Langlois, T. J.

2017-06-01

Remote Operated Vehicles are routinely used to undertake inspection and maintenance activities of underwater pipelines in north-west Australia. In doing so, many terabytes of geo-referenced underwater video are collected at depths, and on a scale usually unobtainable for ecological research. We assessed fish diversity and abundance from existing ROV videos collected along 2-3 km sections of two pipelines in north-west Australia, one at 60-80 m water depth and the other at 120-130 m. A total of 5962 individual fish from 92 species and 42 families were observed. Both pipelines were characterised by a high abundance of commercially important fishes including: snappers (Lutjanidae) and groupers (Epinephelidae). The presence of thousands of unidentifiable larval fish, in addition to juveniles, sub-adults and adults suggests that the pipelines may be enhancing, rather than simply attracting, fish stocks. The prevalence and high complexity of sponges on the shallower pipeline and of deepwater corals on the deeper pipeline had a strong positive correlation with the fish abundance. These habitats likely offer a significant food source and refuge for fish, but also for invertebrates upon which fish feed. A greater diversity on the shallower pipeline, and a higher abundance of fishes on both pipelines, were associated with unsupported pipeline sections (spans) and many species appeared to be utilising pipeline spans as refuges. This study is a first look at the potential value of subsea pipelines for fishes on the north-west shelf. While the results suggest that these sections of pipeline appear to offer significant habitat that supports diverse and important commercially fished species, further work, including off-pipeline surveys on the natural seafloor, are required to determine conclusively the ecological value of pipelines and thereby inform discussions regarding the ecological implications of pipeline decommissioning.

Product Service Systems

DEFF Research Database (Denmark)

Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems......Departing from Product Development models based on physical artefacts. Moving towards integrated Product Development and System Operations models suited Product/Service-systems...

Permanent cathodic protection monitoring systems for offshore pipelines

Energy Technology Data Exchange (ETDEWEB)

Britton, Jim [Deepwater Corrosion Services Inc., Houston, TX (United States)

2009-07-01

Historically offshore pipeline cathodic protection monitoring has relied on the use of portable survey techniques. This has typically relied on ROV assisted or surface deployed survey methods. These methods have been shown to have technical as well as economic shortcomings, this is particularly true of buried offshore pipelines where accuracy is always questionable. As more focus is being placed on offshore pipeline integrity, it was time for a new method to emerge. The technology discussed involves the retro-placement of permanent clamp-on monitors onto the pipeline which can measure pipeline to seawater potential as well as current density. The sensors can be interrogated locally using light powered subsea voltage readouts. Application of the technology can be either during pipeline construction, during installation of life extension CP systems, or during routine subsea pipeline interventions. The new method eliminates the need for long cables or expensive acoustic or modulated data transfer and provides all the information required to fully verify CP system performance, thus eliminating the need for expensive close-interval surveys. Some deployment case histories will be presented along with feasibility of application on deep water pipelines and comparative economics. (author)

Developing and operating a remotely operated work system in hostile and emergency environments

International Nuclear Information System (INIS)

Thorne, P.M.

1987-01-01

The author presents an overview of the factors that a project manager considering the use of remote work systems must keep in mind during the planning and execution of operations in hostile environments. Interfacing of the remote work system to the task and understanding mission parameters is emphasized. The author's thesis is based on many years of technical operations and project management roles using remote work systems in the subsea oil industry, military and, most recently, space and nuclear applications

Subsurface Hybrid Power Options for Oil & Gas Production at Deep Ocean Sites

Energy Technology Data Exchange (ETDEWEB)

Farmer, J C; Haut, R; Jahn, G; Goldman, J; Colvin, J; Karpinski, A; Dobley, A; Halfinger, J; Nagley, S; Wolf, K; Shapiro, A; Doucette, P; Hansen, P; Oke, A; Compton, D; Cobb, M; Kopps, R; Chitwood, J; Spence, W; Remacle, P; Noel, C; Vicic, J; Dee, R

2010-02-19

An investment in deep-sea (deep-ocean) hybrid power systems may enable certain off-shore oil and gas exploration and production. Advanced deep-ocean drilling and production operations, locally powered, may provide commercial access to oil and gas reserves otherwise inaccessible. Further, subsea generation of electrical power has the potential of featuring a low carbon output resulting in improved environmental conditions. Such technology therefore, enhances the energy security of the United States in a green and environmentally friendly manner. The objective of this study is to evaluate alternatives and recommend equipment to develop into hybrid energy conversion and storage systems for deep ocean operations. Such power systems will be located on the ocean floor and will be used to power offshore oil and gas exploration and production operations. Such power systems will be located on the oceans floor, and will be used to supply oil and gas exploration activities, as well as drilling operations required to harvest petroleum reserves. The following conceptual hybrid systems have been identified as candidates for powering sub-surface oil and gas production operations: (1) PWR = Pressurized-Water Nuclear Reactor + Lead-Acid Battery; (2) FC1 = Line for Surface O{sub 2} + Well Head Gas + Reformer + PEMFC + Lead-Acid & Li-Ion Batteries; (3) FC2 = Stored O2 + Well Head Gas + Reformer + Fuel Cell + Lead-Acid & Li-Ion Batteries; (4) SV1 = Submersible Vehicle + Stored O{sub 2} + Fuel Cell + Lead-Acid & Li-Ion Batteries; (5) SV2 = Submersible Vehicle + Stored O{sub 2} + Engine or Turbine + Lead-Acid & Li-Ion Batteries; (6) SV3 = Submersible Vehicle + Charge at Docking Station + ZEBRA & Li-Ion Batteries; (7) PWR TEG = PWR + Thermoelectric Generator + Lead-Acid Battery; (8) WELL TEG = Thermoelectric Generator + Well Head Waste Heat + Lead-Acid Battery; (9) GRID = Ocean Floor Electrical Grid + Lead-Acid Battery; and (10) DOC = Deep Ocean Current + Lead-Acid Battery.

Banana production systems: identification of alternative systems for more sustainable production.

Science.gov (United States)

Bellamy, Angelina Sanderson

2013-04-01

Large-scale, monoculture production systems dependent on synthetic fertilizers and pesticides, increase yields, but are costly and have deleterious impacts on human health and the environment. This research investigates variations in banana production practices in Costa Rica, to identify alternative systems that combine high productivity and profitability, with reduced reliance on agrochemicals. Farm workers were observed during daily production activities; 39 banana producers and 8 extension workers/researchers were interviewed; and a review of field experiments conducted by the National Banana Corporation between 1997 and 2002 was made. Correspondence analysis showed that there is no structured variation in large-scale banana producers' practices, but two other banana production systems were identified: a small-scale organic system and a small-scale conventional coffee-banana intercropped system. Field-scale research may reveal ways that these practices can be scaled up to achieve a productive and profitable system producing high-quality export bananas with fewer or no pesticides.

Technological contribution of production engineering for national self-sufficiency in petroleum; Contribuicao tecnologica da engenharia de producao para a auto-suficiencia nacional

Energy Technology Data Exchange (ETDEWEB)

Lara, Anelise Quintao [PETROBRAS, Rio de Janeiro, RJ (Brazil). E e P Engenharia de Producao. Gerencia de Engenharia de Reservatorios], e-mail: alara@petrobras.com.br; Pinto, Antonio Carlos Capeleiro [PETROBRAS, Rio de Janeiro, RJ (Brazil). E e P Engenharia de Producao. Gerencia de Pre-Projetos de Desenvolvimento da Producao], e-mail: acc@petrobras.com.br; Lage, Antonio Carlos Vieira Martins [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Tecnologia e Engenharia de Poco], e-mail: antoniolage@petrobas.com.br; Del Vecchio, Cesar Jose Moraes [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Programa Tecnologico de Transporte (PROTRAN)], e-mail: cdv@petrobras.com.br; Masetti, Isaias Quaresma [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Metodos Cientificos], e-mail: masetti@petrobras.com.br; Formigli Filho, Jose Miranda [PETROBRAS, Rio de Janeiro, RJ (Brazil). E e P Engenharia de Producao. Gerencia Executiva de Engenharia de Producao; Fagundes Netto, Jose Roberto [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia de Tecnologia de Elevacao, Escoamento e Processamento], e-mail: rfagundes@petrobras.com.br; Beltrao, Ricardo Luis Carneiro [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES). Gerencia Geral de Producao], e-mail: rbeltrao@petrobras.com.br

2006-06-15

This paper presents a retrospective of some of PETROBRAS' main technological advances that contributed for Brazil to reach petroleum production self-sufficiency. The impact of the corporate strategy to invest in training and qualifying human resources in the development of critical technologies for the Company's business is discussed. From the mid-seventies, there has been a significant increase in the effort directed to research and development (R and D) in the Exploration and Production (E and P) segment. Motivated by challenges imposed by ever increasing water depths (WD) and the early production of discovered fields, technological developments accelerated. A few of the topics discussed herein include the competition between wet subsea systems and atmospheric systems, the first floating production units based on semi-submersible drilling platforms and on adapted tankers, the development of wellhead systems, risers and production lines. Beginning in the mid-eighties, PETROBRAS successively broke world records in terms of water depth with its wells and production and off loading facilities. In order to support this leadership, new technologies were developed and adapted, in partnership with vendors and scientific and technological institutions, in the country and abroad. This paper discusses the technologies developed for maintaining the production of mature fields, increasing the production capacity and managing the integrity of installed units, managing great volumes of produced water as a function of mechanisms adopted for the maintenance of reservoir pressure and managing production projects. In conclusion, the main solutions currently in development are described. (author)

Production of Modularised Product Systems

DEFF Research Database (Denmark)

Jacobsen, Peter

2004-01-01

but a solution. Modularisation is one tool used in designing the products. Designing and controlling a production system making customized products in an economical way is not an easy task. In order to fulfil the Lean and Agile manufacturing philosophies the production is often carried out in networks. Here...

Activation of old carbon by erosion of coastal and subsea permafrost in Arctic Siberia.

Science.gov (United States)

Vonk, J E; Sánchez-García, L; van Dongen, B E; Alling, V; Kosmach, D; Charkin, A; Semiletov, I P; Dudarev, O V; Shakhova, N; Roos, P; Eglinton, T I; Andersson, A; Gustafsson, O

2012-09-06

The future trajectory of greenhouse gas concentrations depends on interactions between climate and the biogeosphere. Thawing of Arctic permafrost could release significant amounts of carbon into the atmosphere in this century. Ancient Ice Complex deposits outcropping along the ~7,000-kilometre-long coastline of the East Siberian Arctic Shelf (ESAS), and associated shallow subsea permafrost, are two large pools of permafrost carbon, yet their vulnerabilities towards thawing and decomposition are largely unknown. Recent Arctic warming is stronger than has been predicted by several degrees, and is particularly pronounced over the coastal ESAS region. There is thus a pressing need to improve our understanding of the links between permafrost carbon and climate in this relatively inaccessible region. Here we show that extensive release of carbon from these Ice Complex deposits dominates (57 ± 2 per cent) the sedimentary carbon budget of the ESAS, the world’s largest continental shelf, overwhelming the marine and topsoil terrestrial components. Inverse modelling of the dual-carbon isotope composition of organic carbon accumulating in ESAS surface sediments, using Monte Carlo simulations to account for uncertainties, suggests that 44 ± 10 teragrams of old carbon is activated annually from Ice Complex permafrost, an order of magnitude more than has been suggested by previous studies. We estimate that about two-thirds (66 ± 16 per cent) of this old carbon escapes to the atmosphere as carbon dioxide, with the remainder being re-buried in shelf sediments. Thermal collapse and erosion of these carbon-rich Pleistocene coastline and seafloor deposits may accelerate with Arctic amplification of climate warming.

Deep water tie-back economics capex vs opex and the total costs

Energy Technology Data Exchange (ETDEWEB)

Tarlton, Oran D. [Oil States Industries Inc., Arlington, TX (United States)

2005-07-01

This paper explores the real cost and time benefits associated with the current, past, and future contracting strategies associated with subsea developments. It looks at the real cost associated with out sourcing engineering development and the impact of engineering, procurement, installation, and construction (EPIC) contracts. Development costs are first and foremost in the minds of operators as a field is analyzed for development potential. The cycle starts with an analysis of the geological information to estimate the potential value in the field. It proceeds to conceptual design where the first development methodology and cost estimates are prepared. If the project is initially viable it will proceed from conceptual design to Front End Engineering and Design (FEED) where a complete development plan is prepared with possible options and recommendations. Engineering companies may as a part of the FEED prepare a Request for Quotation (RFQ) which is sent to potential suppliers. As part of a FEED contract, an engineering company may also review responses to the RFQ and provide recommendations for selected suppliers. Typically large subsea projects are divided into several major categories such as: topsides; subsea production systems; wells; subsea umbilical risers and glow lines (SURF), and commissioning in order to simplify management and procurement. Many times these contracts are awarded as EPIC contracts to further simplify management and internal procurement efforts. A case study is presented which challenges current contracting strategies and presents an option for a lower cost and a better way forward with respect to the short term and a focus on the long term. (author)

Stress and thermal expansion numerical analysis of subsea buried pipelines; Analise numerica de tensoes e expansao termica de dutos submarinos enterrados

Energy Technology Data Exchange (ETDEWEB)

Souto, Marcio de S.; Vaz, Murilo A. [Universidade Federal, Rio de Janeiro, RJ (Brazil). Coordenacao dos Programas de Pos-graduacao de Engenharia; Solano, Rafael F. [PETROBRAS S.A., Rio de Janeiro, RJ (Brazil)

2005-07-01

The design of Capixaba North Terminal pipelines (TNC) became very complex, once the pipelines are exposed to elevated temperature variations. As the pipelines are buried, the interaction with the seabed can become critical with the thermal expansion development, since an axial compressive force arise, reaching critical values and then leading the pipeline to the thermo mechanical instability phenomenon. To minimize these effects, the pipeline will cross the shore approach through a horizontal directional drilling, and expansion loops and intermediate tie-ins took place on his route in order to permit pipeline displacements, working thermally. The objective of this present work is to develop a numerical model, able to analyze the entire pipeline stress, strain and displacements, considering different kinds of soil along of his route. The influence of expansion loops is evaluated and a comparative analysis in order to discover the minimum curvature radius at the directional drilling region is carried out. This study defines a methodology based on the developed numerical model which will be extended to future applications in subsea buried pipeline design. (author)

Development and Testing of a Post-Installable Deepwater Monitoring System Using Fiber-Optic Sensors

Science.gov (United States)

Seaman, Calvin H.; Brower, David V.; Le, Suy Q.; Tang, Henry H.

2015-01-01

This paper addresses the design and development of a fiber-optic monitoring system that can be deployed on existing deepwater risers and flowlines; and provides a summary of test article fabrication and the subsequent laboratory testing performed at the National Aeronautics and Space Administration-Johnson Space Center (NASA-JSC). A major challenge of a post-installed instrumentation system is to ensure adequate coupling between the instruments and the riser or flowline of interest. This work investigates the sensor coupling for pipelines that are suspended in a water column (from topside platform to seabed) using a fiber-optic sensor clamp and subsea bonding adhesive. The study involved the design, fabrication, and test of several prototype clamps that contained fiber-optic sensors. A mold was produced by NASA using 3-D printing methods that allowed the casting of polyurethane clamp test articles to accommodate 4-inch and 8-inch diameter pipes. The prototype clamps were installed with a subsea adhesive in a "wet" environment and then tested in the NASA Structures Test Laboratory (STL). The tension, compression, and bending test data showed that the prototype sensor clamps achieved good structural coupling, and could provide high quality strain measurement for active monitoring.

System and method for underwater radiography

Science.gov (United States)

Hunter, James; Keck, Danny Lee; Sims, Jr., James Rae; Watson, Scott Avery

2015-01-20

A system for subsea imaging comprises a first plate having an inner surface, an outer surface, and a cavity formed in the inner surface. In addition, the system comprises a phosphor imaging plate disposed in the cavity. Further, the system comprises a second plate having an inner surface facing the inner surface of the first plate and an outer surface facing away from the outer surface of the first plate. Still further, the system comprises a seal member disposed between the inner surface of the first plate and the inner surface of the second plate. The seal member extends around the perimeter of the cavity and is configured to seal the phosphor imaging plate and the cavity from intrusion water.

Productivity raising approaches in the logistic production system

Directory of Open Access Journals (Sweden)

Miroslav Rakyta

2001-01-01

Full Text Available This paper deals with the productivity of the logistic production system. The aim is to define the intermediate state of the production machines and equipment (OOE, identification of the material flows, idle time and breakdown forecasting, with the following purchase of the required spare parts. The goal of the system is the satisfaction of the customer´s needs and the minimalisation of not fulfilling the required terms for delivery with simultaneous increasing of the logistic production system productivity.

Oil production system

Energy Technology Data Exchange (ETDEWEB)

Ballantyne, J F

1983-12-21

A new oil producing system is proposed which consists of a group of underwater wells, an underwater riser and a floating storage facility for the production of the wells. The group of wells and the riser are interconnected through a manifold system in such a way that the production from any well or from the entire group of wells go to the base (foundation) of the riser. From above the riser is connected with the floating storage facility which is equipped, besides tanks for storing the well products, with a separation device for separating the oil and the accompanying gas. The gas is used as a fuel for producing electric power required by the dynamic positioning systems. The products from each well are tested by means of a regulable coupling controlled by means of a cable, which is passed from the surface through the riser. The wellhead equipment for the unslanted wells is mounted on a template previously installed on the sea floor. From the template the well products enter the riser through the manifold unit system.

STRATEGIES FOR INCREASING PRODUCTIVITY IN PRODUCTION SYSTEMS

Directory of Open Access Journals (Sweden)

Diego Pacheco

2014-05-01

Full Text Available The main objective of this article is to point a set of practical strategies that can be adopted to increase the capacity of constraints resources on production systems, when the constraint is inside the factory and not is in the market. To serve this purpose will be presented strategies based on best practices of the Theory of Constraints, Lean Manufacturing and Total Productive Maintenance. This article also presents the mains tools for the deployment of these methodologies. The survey results have provided an objective set of practical strategy that can be used to increase the capacity and productivity of production systems according to the needs of each manufacturing system.

Production monitoring system for understanding product robustness

DEFF Research Database (Denmark)

Boorla, Srinivasa Murthy; Howard, Thomas J.

2016-01-01

study is used to demonstrate how the monitoring system can be used to efficiently guide corrective action to improve product performance. It is claimed that the monitoring system can be used to dramatically cut the time taken to identify, planand execute corrective action related to typical quality......In the current quality paradigm, the performance of a product is kept within specification by ensuring that its parts are within specification. Product performance is then validated after final assembly. However, this does not control how robust the product performance is, i.e. how much...... it will vary between the specification limits. In this paper, a model for predicting product performance is proposed, taking into account design, assembly and process parameters live from production. This empowers production to maintain final product performance, instead of part quality. The PRECI‐IN case...

Sustainable Industrial Product Systems. Integration of Life Cycle Assessment in Product development and Optimization of Product Systems

Energy Technology Data Exchange (ETDEWEB)

Hanssen, Ole Joergen

1997-12-31

This thesis contributes to the development and testing of environmental life cycle assessment (LCA) in product development and management in industry. It is based on systems theory and systems engineering. It develops a method for sustainable product development that has been successfully tested in the Nordic project called NEP. The LCA method is also a basis for an optimization model, where life cycle economy and environmental impacts from product systems are optimized with a non-linear model. A more complete mathematical model for LCA, based on the functional requirements on a product system, is also developed. The statistical properties of emission factors are studied using a data set from the Swedish Kraft Mill industry. It is shown that emission factors may be assumed constants in the LCA model, but with rather large variations within a population of Kraft mills. It is shown that there are a few environmental impacts which are important for most types of products under Scandinavian conditions, especially global warming potential, acidification, human toxicity and fossil energy depletion. There are significant differences between the contribution to these impacts from different life cycle stages, where raw material processing and use of products are generally more important than the other stages. Test cases indicate that there are no large conflicts between improvements in environmental impacts and customer requirements. Environmental improvements seem to increase purchase cost of products in some cases, but the life cycle cost of the products seem in most cases to be reduced. It is concluded that there are opportunities for 30-50% improvements in product system, based on relatively simple modifications of the systems. 246 refs., 63 figs., 19 tabs.

Graphical Programming: A systems approach for telerobotic servicing of space assets

International Nuclear Information System (INIS)

Pinkerton, J.T.; Patten, R.

1993-01-01

Satellite servicing is in many ways analogous to subsea robotic servicing in the late 1970's. A cost effective, reliable, telerobotic capability had to be demonstrated before the oil companies invested money in deep water robot serviceable production facilities. In the same sense, aeronautic engineers will not design satellites for telerobotic servicing until such a quantifiable capability has been demonstrated. New space servicing systems will be markedly different than existing space robot systems. Past space manipulator systems, including the Space Shuttle's robot arm, have used master/slave technologies with poor fidelity, slow operating speeds and most importantly, in-orbit human operators. In contrast, new systems will be capable of precision operations, conducted at higher rates of speed, and be commanded via ground-control communication links. Challenges presented by this environment include achieving a mandated level of robustness and dependability, radiation hardening, minimum weight and power consumption, and a system which accommodates the inherent communication delay between the ground station and the satellite. There is also a need for a user interface which is easy to use, ensures collision free motions, and is capable of adjusting to an unknown workcell (for repair operations the condition of the satellite may not be known in advance). This paper describes the novel technologies required to deliver such a capability

Energy production systems engineering

CERN Document Server

Blair, Thomas Howard

2017-01-01

Energy Production Systems Engineering presents IEEE, Electrical Apparatus Service Association (EASA), and International Electrotechnical Commission (IEC) standards of engineering systems and equipment in utility electric generation stations. Electrical engineers that practice in the energy industry must understand the specific characteristics of electrical and mechanical equipment commonly applied to energy production and conversion processes, including the mechanical and chemical processes involved, in order to design, operate and maintain electrical systems that support and enable these processes. To aid this understanding, Energy Production Systems Engineeringdescribes the equipment and systems found in various types of utility electric generation stations. This information is accompanied by examples and practice problems. It also addresses common issues of electrical safety that arise in electric generation stations.

Product Configuration Systems - Implications for Product Innovation and Development

DEFF Research Database (Denmark)

Edwards, Kasper; Pedersen, Jørgen Lindgaard

2004-01-01

configurations. However, costs are but one parameter on which firms compete and firms must continually innovate new and develop existing products. This paper presents original empirical insights on implementation and use of product configuration systems in a number of Danish industrial firms. The paper discusses...... the organisational changes associated with PCS and how this affects product innovation and development. The paper begins by introducing product configuration systems, which are then placed in context to the firm as a process technology which coordinate different processes: product development, order acquisition......Product Configuration Systems (PCS) is a step in the direction of mass customization in the sense that PCS allows a firm to significantly lower the unit cost of configuration. Thus PCS is a valuable technology for lowering operating costs while retaining a high number of possible product...

The productivity and work load in flexible production systems

NARCIS (Netherlands)

Rhijn, J.W. van; Looze, M.P. de; Schoenmaker, N.; Bosch, T.; Deursen, J. van

2006-01-01

A negative aspect of serial flow production systems is its lack of flexibility. Other production systems like the flexing flow and the shopping system are more flexible as the number of workers can be easily adjusted to temporal demands. But how efficient are these flexible systems? In a laboratory

ATLAS production system

CERN Document Server

Borodin, Mikhail; The ATLAS collaboration; De, Kaushik; Klimentov, Alexei; Golubkov, Dmitry; Maeno, Tadashi; Mashinistov, Ruslan; Wenaus, Torre; Padolski, Siarhei

2016-01-01

The second generation of the ATLAS production system called ProdSys2 is a distributed workload manager which used by thousands of physicists to analyze the data remotely, with the volume of processed data is beyond the exabyte scale, across a more than hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based on many criterias, such as input and output size, memory requirements and CPU consumption with manageable scheduling policies and by supporting different kind of computational resources, such as GRID, clouds, supercomputers and volunteering computers. Besides jobs definition Production System also includes flexible web user interface, which implements user-friendly environment for main ATLAS workflows, e.g. simple way of combining different data flows, and real-time monitoring, optimised for using with huge amount of information to present. We present an overview of the ATLAS Production System major components: job and task definition, workflow manager web user i...

Power and Submarine Cable Systems for the KM3NeT kilometre cube Neutrino Telescope

CERN Document Server

Sedita, M; Hallewell, G

2009-01-01

The KM3NeT EU-funded consortium, pursuing a cubic kilometre scale neutrino telescope in the Mediterranean Sea, is developing technical solutions for the construction of this challenging project, to be realized several kilometres below the sea level. In this framework a proposed DC/DC power system has been designed, maximizing reliability and minimizing difficulties and expensive underwater activities. The power conversion, delivery, transmission and distribution network will be described with particular attention to: the main electro-optical cable, on shore and deep sea power conversion, the subsea distribution network and connection systems, together with installation and maintenance issues.

Observed benefits from product configuration systems

DEFF Research Database (Denmark)

Hvam, Lars; Haug, Anders; Mortensen, Niels Henrik

2013-01-01

This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... affected by the use of product configu-ration systems e.g. increased sales, decrease in the number of SKU's, improved ability to introduce new products, and cost reductions.......This article presents a study of the benefits obtained from applying product configuration systems based on a case study in four industry companies. The impacts are described according to main objectives in literature for imple-menting product configuration systems: lead time in the specification...... processes, on-time delivery of the specifica-tions, and resource consumption for making specifications, quality of specifications, optimization of products and services, and other observations. The purpose of the study is partly to identify specific impacts observed from implementing product configuration...

The system Around the Product

DEFF Research Database (Denmark)

Morelli, Nicola

      The design discipline has traditionally focused on products physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ?operative paradigm? to operate in a systemic context. An operative paradigm consists of a set of tools...... and methods to handle immaterial aspects such as time sequences, actors? role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...

Modeling Novo Nordisk Production Systems

DEFF Research Database (Denmark)

Miller, Thomas Dedenroth

1997-01-01

This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'.......This report describes attributes of models and systems, and how models can be used for description of production systems. There are special attention on the 'Theory of Domains'....

On the operational aspects of subsea systems

Digital Repository Service at National Institute of Oceanography (India)

Nayak, M.R.

The scientific and commercial underwater activities in the next decades primarily in 'undersea vehicles' and 'manned submersibles' will be taking place in the oceans and ocean related technology. The paper underlines some of the operational aspects...

Automated plant, production management system

Science.gov (United States)

Aksenova, V. I.; Belov, V. I.

1984-12-01

The development of a complex of tasks for the operational management of production (OUP) within the framework of an automated system for production management (ASUP) shows that it is impossible to have effective computations without reliable initial information. The influence of many factors involving the production and economic activity of the entire enterprise upon the plan and course of production are considered. It is suggested that an adequate model should be available which covers all levels of the hierarchical system: workplace, section (bridgade), shop, enterprise, and the model should be incorporated into the technological sequence of performance and there should be provisions for an adequate man machine system.

Product Configuration Systems and Productivity

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

Twelve companies have been interviewed with the purpose to get information about technical, economic and organisational matters in respect of Product Configuration Systems (PCS).Combinations of qualitative interviews and quantitative scoring have been used in ranking expected and realized results...

The SPOOKI post production system

Science.gov (United States)

Beauchemin, M.; Klasa, M.; Fortier, S.; Fortin, F.; Hardy, G.; Pelletier, L.; Edouard, S.; Archambault, B.; Yazidi, H.

2010-09-01

The Canadian Meteorological Centre (CMC) delivers a large number of numerical weather prediction products to the various weather offices and clients throughout Canada and abroad. The current post production system was built according to the needs and ideology of the 1980's and it is becoming obsolete with time. Its cumbersome architecture is difficult to maintain and requires a lot of human and computing resources. The "Weather Elements" section of CMC is aware of the problems associated with its maintenance in the long term and has therefore decided to review in depth the whole approach to the operational post production. The analysis of present and future needs have led to the development of an innovative concept in the operational production field inspired by the "Plug and Play" process. SPOOKI (Système de Production Orienté-Objet contennant une Kyrielle d'Informations - Object oriented production system containing a myriad of information) was created in its present form in 2007. It is based on a modular approach where each plug-in component is specialized, reusable and autonomous. These object oriented programming characteristics greatly simplify the maintenance of the system. Particular attention was also given to create a user-friendly system for novice users. An experimental version of SPOOKI is currently running in development mode and an operational one is planned to be implemented in the coming year. The poster presentation will describe SPOOKI, the future CMC operational post production system. Several examples of usage will be shown.

Floating production platforms and their applications in the development of oil and gas fields in the South China Sea

Science.gov (United States)

Zhang, Dagang; Chen, Yongjun; Zhang, Tianyu

2014-03-01

This paper studies the current available options for floating production platforms in developing deepwater oil fields and the potential development models of future oil and gas exploration in the South China Sea. A detailed review of current deepwater platforms worldwide was performed through the examples of industry projects, and the pros and cons of each platform are discussed. Four types of platforms are currently used for the deepwater development: tension leg platform, Spar, semi-submersible platform, and the floating production system offloading. Among these, the TLP and Spar can be used for dry tree applications, and have gained popularity in recent years. The dry tree application enables the extension of the drilling application for fixed platforms into floating systems, and greatly reduces the cost and complexity of the subsea operation. Newly built wet tree semi-submersible production platforms for ultra deepwater are also getting their application, mainly due to the much needed payload for deepwater making the conversion of the old drilling semi-submersible platforms impossible. These platforms have been used in different fields around the world for different environments; each has its own advantages and disadvantages. There are many challenges with the successful use of these floating platforms. A lot of lessons have been learned and extensive experience accumulated through the many project applications. Key technologies are being reviewed for the successful use of floating platforms for field development, and potential future development needs are being discussed. Some of the technologies and experience of platform applications can be well used for the development of the South China Sea oil and gas field.

NDSI products system based on Hadoop platform

Science.gov (United States)

Zhou, Yan; Jiang, He; Yang, Xiaoxia; Geng, Erhui

2015-12-01

Snow is solid state of water resources on earth, and plays an important role in human life. Satellite remote sensing is significant in snow extraction with the advantages of cyclical, macro, comprehensiveness, objectivity, timeliness. With the continuous development of remote sensing technology, remote sensing data access to the trend of multiple platforms, multiple sensors and multiple perspectives. At the same time, in view of the remote sensing data of compute-intensive applications demand increase gradually. However, current the producing system of remote sensing products is in a serial mode, and this kind of production system is used for professional remote sensing researchers mostly, and production systems achieving automatic or semi-automatic production are relatively less. Facing massive remote sensing data, the traditional serial mode producing system with its low efficiency has been difficult to meet the requirements of mass data timely and efficient processing. In order to effectively improve the production efficiency of NDSI products, meet the demand of large-scale remote sensing data processed timely and efficiently, this paper build NDSI products production system based on Hadoop platform, and the system mainly includes the remote sensing image management module, NDSI production module, and system service module. Main research contents and results including: (1)The remote sensing image management module: includes image import and image metadata management two parts. Import mass basis IRS images and NDSI product images (the system performing the production task output) into HDFS file system; At the same time, read the corresponding orbit ranks number, maximum/minimum longitude and latitude, product date, HDFS storage path, Hadoop task ID (NDSI products), and other metadata information, and then create thumbnails, and unique ID number for each record distribution, import it into base/product image metadata database. (2)NDSI production module: includes

Pesticide Product Label System

Data.gov (United States)

U.S. Environmental Protection Agency — The Pesticide Product Label System (PPLS) provides a collection of pesticide product labels (Adobe PDF format) that have been approved by EPA under Section 3 of the...

Detailed design of product oriented manufacturing systems

OpenAIRE

Silva, Sílvio Carmo; Alves, Anabela Carvalho

2006-01-01

This paper presents a procedure for the detailed design and redesign of manufacturing systems within a framework of constantly fitting production system configuration to the varying production needs of products. With such an approach is achieved the design of Product Oriented Manufacturing Systems – POMS. This approach is in opposition to the fitting, before hand, of a production system to all products within a company. In this case is usual to adopt a Function Oriented Manufactur...

On the integrity of flexible pipes for subsea applications

Energy Technology Data Exchange (ETDEWEB)

Almeida, Marcos C. de; Brack, Marcelo; Lontra Filho, Lauro L.; Jorge, Nilo de M. [PETROBRAS, Rio de Janeiro, RJ (Brazil)

2005-07-01

Most of PETROBRAS offshore oil and gas production is conveyed through Flexible Pipes (FPs) used for gathering, exporting and importing functions. PETROBRAS is the greatest user of FPs worldwide and, due to the complexity of the FP, a composite structure having many steel and polymeric layers and end fittings, it implies a huge number of possible failure mechanisms, much more than those expected for steel pipes. The use of FP demands a special approach over all life cycle phases, from the basic engineering up to the operation/reuse/decommission, by evaluating the application feasibility together with potential failures. This paper accounts some of PETROBRAS experience on FPs, mainly a current approach on their integrity and planned measures in order to assure production and prevent accidents, based on the most relevant failure mechanisms. The preventive actions includes review on failures and their causes and, consequently, improvement on specifications, FP design verification, prototype qualification, inspection and monitoring of integrity key parameters during installation and operation, as well as, maintenance. A FPs Company Integrity Directives and Database will allow a continuous improvement of field systems reliability through to a periodic assessment of performances and feedback to activities for the whole FP life cycle. (author)

Improvement of Artistic Cast Production System

Directory of Open Access Journals (Sweden)

Władysiak R.

2017-09-01

Full Text Available The paper presents the technology and organization of the artistic cast production. On the basis of the actual cast production system, the manufacturing process was shown, in particular sand–piece moulding, which is a very important process and a time-consuming part of the entire manufacture of the casts. The current state of the production process as well as the organization of the work and production technology were analysed with the use of methods and techniques of production improvement, the Lean Manufacturing concept and computer systems. The results of the analysis and studies were shown with use of schemes and graphs of the layout of the production resources, a flow chart of the production process, value stream mapping, and a costs table for the production and modernization of the moulding stage. The work has shown that there are possibilities to improve the artistic cast production system. This improvement leads to increased productivity, lower production costs of artistic casts and increased competitiveness of the foundry.

MANAGING PRODUCT SAFETY SYSTEM HACCP ON THE EXAMPLE OF BEET-SUGAR PRODUCTION

Directory of Open Access Journals (Sweden)

V. A. Golybin

2015-01-01

Full Text Available The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

Innovativeness in production systems

DEFF Research Database (Denmark)

Blichfeldt, Henrik; Knudsen, Mette Præst

Alignment of market demand and manufacturing capabilities are directly linked to the potential competitive advantage. Pressure for manufacturing companies to customize increase the need for productions systems to handle innovations, especially in SMEs. The paper claims that innovativeness has...... a positive influence of the ability of the manufacturing system to provide specific capabilities that enables the entire production system to positively influence the competitiveness. A comparative case study of three SMEs shows that competitive advantages are obtained through innovative technologies......, but revealed also automation potential in data and information management to be more responsive and cost-effective....

Production Systems and Supplier Selection

DEFF Research Database (Denmark)

Pedraza-Acosta, Isabel; Pilkington, Alan; Barnes, David

2016-01-01

strategic stamping suppliers. Findings: Our contribution is the multi-phased production and product innovation process. This is an advance from traditional supplier selection and also an extension of ideas of supplier-located product development as it includes production system development, and complements...

Description, Modelling and Design of Production Systems

DEFF Research Database (Denmark)

Jacobsen, Peter; Rudolph, Carsten

1997-01-01

Design of production systems are rarely an activity in which decision makers in most production companies have much experience. In future, this activity is to be more recurrent due to more and more frequent changes in the production task. Consequently, the decision makers are in need of better...... management tools and methods for description and modelling of production systems supporting the decisions. In this article a structural framework to describe and model production systems will be introduced, and it is shown how the production system of a minor Danish manufacturer of electromechanical...

Integrated Monitoring System of Production Processes

Directory of Open Access Journals (Sweden)

Oborski Przemysław

2016-12-01

Full Text Available Integrated monitoring system for discrete manufacturing processes is presented in the paper. The multilayer hardware and software reference model was developed. Original research are an answer for industry needs of the integration of information flow in production process. Reference model corresponds with proposed data model based on multilayer data tree allowing to describe orders, products, processes and save monitoring data. Elaborated models were implemented in the integrated monitoring system demonstrator developed in the project. It was built on the base of multiagent technology to assure high flexibility and openness on applying intelligent algorithms for data processing. Currently on the base of achieved experience an application integrated monitoring system for real production system is developed. In the article the main problems of monitoring integration are presented, including specificity of discrete production, data processing and future application of Cyber-Physical-Systems. Development of manufacturing systems is based more and more on taking an advantage of applying intelligent solutions into machine and production process control and monitoring. Connection of technical systems, machine tools and manufacturing processes monitoring with advanced information processing seems to be one of the most important areas of near future development. It will play important role in efficient operation and competitiveness of the whole production system. It is also important area of applying in the future Cyber-Physical-Systems that can radically improve functionally of monitoring systems and reduce the cost of its implementation.

Modelling production system architectures in the early phases of product development

DEFF Research Database (Denmark)

Guðlaugsson, Tómas Vignir; Ravn, Poul Martin; Mortensen, Niels Henrik

2016-01-01

are needed and appropriate to enable determination of obtainable product quality. In order to meet this challenge, it is suggested that a visual modelling framework be adopted that clarifies which product and production features are known at a specific time of the project and which features will be worked...... on – leading to an improved basis for prioritizing activities in the project. Requirements for the contents of the framework are presented, and literature on production and system models is reviewed. The production system architecture modelling framework is founded on methods and approaches in literature......This article suggests a framework for modelling a production system architecture in the early phases of product development.The challenge in these phases is that the products to be produced are not completely defined and yet decisions need to be made early in the process on what investments...

Product Configuration Systems and Consequences for Productivity and Quality

DEFF Research Database (Denmark)

Pedersen, Jørgen Lindgaard; Edwards, Kasper

2004-01-01

with informations about expected and realised costs and benefits in implemented PCS's we have the following results: the three highest aggregated scoring expected benefits are: 1)improved quality in specifications, 2)lower turnaround time, and 3)using less resources.The results achieved are in accordance......Product Configuration Systems (PCS) are systems to produce quotations to potential buyers of the products an enterprise produces. Typically the products are complex and will first be produced according to specific needs from the customers. From twelve case studies in Danish industry...

The system around the product

DEFF Research Database (Denmark)

Morelli, Nicola

2006-01-01

The design discipline has traditionally focused on products’ physical aspects, giving for granted that the context of services, infrastructures and technology will support the product life. A systemic perspective would revise such a focus, in order to project design competences over systemic...... aspects usually neglected by designers. This perspective shift is a challenge for designers, who have very efficient methods and tools to handle physical aspects of product design, but need to define an ‘operative paradigm’ to operate in a systemic context. An operative paradigm consists of a set of tools...... and methods to handle immaterial aspects such as time sequences, actors’ role and logical links in a product service system (PSS). Tools and methods can be borrowed from other disciplinary contexts, their relevance, though, derives from their adaptation to this specific study area: designing in a systemic...

Sterile Product Packaging and Delivery Systems.

Science.gov (United States)

Akers, Michael J

2015-01-01

Both conventional and more advanced product container and delivery systems are the focus of this brief article. Six different product container systems will be discussed, plus advances in primary packaging for special delivery systems and needle technology.

An integrated production, inventory and preventive maintenance model for a multi-product production system

International Nuclear Information System (INIS)

Liu, Xuejuan; Wang, Wenbin; Peng, Rui

2015-01-01

This paper considers a production system that can produce multiple products alternately. Products go through the system in a sequence and a complete run of all products forms a production cycle. An integrated production, inventory and preventive maintenance model is constructed, which is characterized by the delay-time concept. Two different situations are studied based on whether the unqualified products and downtime caused by the failures of the system, set-up and preventive maintenance can be ignored or not. Three cases are considered for each situation, depending on the position of the preventive maintenance epochs: the first case, where preventive maintenance is carried out at the end of each production cycle; the second case, where preventive maintenance is carried out at each set-up time of the products; and the third case, where preventive maintenance is carried out at some set-up times only, since it may not always be optimal to carry out preventive maintenance at the end of the production cycle or at each set-up time. The modeling objectives are to find the optimal number of production cycles per year and the optimal position of preventive maintenance that will maximize the expected profit per unit time. Numerical examples, using real data, are presented to illustrate the model. - Highlights: • We propose an integrated economic production quantity and preventive maintenance model. • The situation that multiple products are produced on the same system alternately is studied. • Two situations are studied based on whether the downtime and the product quality can be ignored or not. • We use enumeration method and analytical method to select the optimal preventive maintenance policy, respectively. • We use the delay-time concept to model the preventive maintenance policy

Development of Production Systems

DEFF Research Database (Denmark)

Christiansen, Thomas Bøhm

1997-01-01

This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by......This paper presents the initial considerations related to a Ph.D. study initiated at IPV, DTU in February 1997, concerning the research subject "Development of Production Systems". The content and aim of this paper is to 1) to introduce the study by...

Modelling Product Families for Product Configuration Systems with Product Variant Master

DEFF Research Database (Denmark)

Mortensen, Niels Henrik; Hvam, Lars; Haug, Anders

2010-01-01

This article presents an evaluation of applying a suggested method for modelling product families for product configuration based on theory for modelling mechanical products,systems theory and object-oriented modelling. The modelling technique includes a so-called product variant master and CRC-cards...... the three views. Modelling of characteristics of the product variants in a product family Modelling of constraints between parts in the product family Visualisation of the entire product family on a poster e.g. 1x2 meters The product variant master and CRC-cards are means to bridge the gap between domain...... experts and IT-developers, thus making it possible for the domain experts (e.g. engineers from product development) to express their knowledge in a form that is understandable both for the domain experts and the IT-developers. The product variant master and CRC-cards have currently been tested and further...

Production control system specified quality sausage products

Directory of Open Access Journals (Sweden)

A. V. Tokarev

2016-01-01

Full Text Available The problem of management of production target in technological system of production of sausages of the set quality is considered in article. Decomposition of technological system is considered. Functions of management are allocated: formation of an optimum compounding of forcemeat, expert analysis of a compounding, laboratory analysis of a compounding and its statement. Information technology of interaction of these functions is offered. The mathematical problem definition of finding of an optimum compounding meat product with use of possible substitutes of ingredients is presented. This mathematical problem is a classical linear programming problem whose solution has the standard program. Since the manufacture of the finished product are various nonlinear effects are taken into account at the present time it is practically impossible, the methodology provided in this operation "Expert analysis of the formulation" and "Laboratory analysis of the finished product." An example of calculating the optimum alternative base recipe "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. For an alternative formulation demands were made at a cost of meat, the ingredient composition, as well as the final product organoleptic and physic-chemical indicators should comply with regulatory requirements "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002. Indicator acid activity (pH calculated stuffing formulation should be in the range 6.0-6.3. As a partial replacement for the main raw material have been proposed acceptable substitutes. It was necessary to calculate on the basis of the formulation "Sausages “Viennese with cheese”" TS 9213-010-40155161-2002 optimal price and quality alternative formulation. As a result of depreciation of the value of alternative stuffing recipe was 14,5 % when all of the restrictions on the consumer properties. The proposed information technology implemented in the software package "Multi

Intelligent supervision control for the VASPS separator

Energy Technology Data Exchange (ETDEWEB)

Melo, A.V.; Mendes, J.R.P. [Universidade Estadual de Campinas (UNICAMP), SP (Brazil)], E-mail: jricardo@dep.fem.unicamp.br; Serapiao, A.B.S [Universidade Estadual Paulista Julio de Mesquita Filho (UNESP), Rio Claro, SP (Brazil)

2007-10-15

The Vertical Annular Separation and Pumping System, VASPS, has been applied to low-pressure subsea wells with high gas production potential. In this system, the separation is carried out on the sea bed, thus allowing the monophase transmission through different pipelines. In the present work, an analysis has been established between two conceptually distinct models for the control system, which is under development and uses the Fuzzy Control technique for the Electrical Submersible Pump (ESP) speed selection. The contrast is held on the objective of each controller, placing the operational performance against the stability of the control signal, which leads to the exploration of many specific aspects of the system, its behavior and requirements. (author)

Research on hydrogen production system

International Nuclear Information System (INIS)

Nakagiri, Toshio

2002-07-01

Hydrogen is closely watched for environmental issues in recent years. In this research, hydrogen production systems and production techniques are widely investigated, and selected some hydrogen production process which have high validity for FBR system. Conclusions of the investigation are shown below. (1) Water-electrolysis processes and steam reform processes at low temperatures are already realized in other fields, so they well be easily adopted for FBR system. FBR system has no advantage when compared with other systems, because water-electrolysis processes can be adopted for other electricity generation system. On the other hand, FBR system has an advantage when steam reforming processes at low temperatures will be adopted, because steam reforming processes at 550-600degC can't be adopted for LWR. (2) Thermochemical processes will be able to adopted for FBR when process temperature will be lowered and material problems solved, because their efficiencies are expected high. Radiolysis processes which use ray (for example, gamma rya) emitted in reactor can be generate hydrogen easily, so they will be able to be adopted for FBR if splitting efficiency will be higher. Further investigation and R and D to realize these processes are considered necessary. (author)

Pesticide Product Information System (PPIS)

Data.gov (United States)

U.S. Environmental Protection Agency — The Pesticide Product Information System contains information concerning all pesticide products registered in the United States. It includes registrant name and...

Production System Design for Multiple Brands

DEFF Research Database (Denmark)

Karlsson, Christer; Christensen, Irene

Production systems enabling both cost efficiency and flexibility in terms of high product variation are explored. The study follows an explorative longitudinal field study approach. The database consists of three large global corporations, each consisting of several companies producing household ......-outs, worker skills, integration of distribution channels, after sales service and degree of servitization. Three production system design principles called VXY emerge....

A Conceptual Model for Production Leveling (Heijunka) Implementation in Batch Production Systems

OpenAIRE

De Araujo , Luciano Fonseca; De Queiroz , Abelardo Alves

2009-01-01

International audience; This paper explains an implementation model for a new method for Production Leveling designed for batch production system. The main structure of this model is grounded on three constructs: traditional framework for Operations Planning, Lean Manufacturing concepts for Production Leveling and case study guidelines. By combining the first and second construct, a framework for Production Leveling has been developed for batch production systems. Then, case study guidelines ...

New solids control system reduced oil on cuttings

Energy Technology Data Exchange (ETDEWEB)

Wilkinson, T.P. [Oiltools Europe Ltd., Aberdeen (United Kingdom)

1996-04-08

A new solids control system, consisting of four new shakers and a dryer in parallel all discharging into another dryer, significantly reduced the oil on the cuttings in a nine-well offshore drilling program. Cleaned, slurrified cuttings were then discharged overboard. In November 1994, Oiltools (Europe) Ltd. received contracts to upgrade the solids control systems on Sedco Forex`s Sedco 711 and Sovereign Explorer semisubmersible drilling vessels. Sedco Forex required systems that would meet the reduced oil-on-cuttings (OOC) disposal limit of less than 80 g/kg set by the operator, while staying efficient and economical to operate and maintain. In addition, all solids were required to be slurrified for pumping overboard to ensure dispersal away from the subsea center. This article highlights the equipment used and the savings realized on the Sovereign Explorer after the first three wells of a nine-well program.

PLACE OF PRODUCTION COSTS SYSTEM ANALYSIS IN SYSTEM ANALYSIS

Directory of Open Access Journals (Sweden)

Mariia CHEREDNYCHENKO

2016-12-01

Full Text Available Current economic conditions require the development and implementation of an adequate system of production costs, which would ensure a steady profit growth and production volumes in a highly competitive, constantly increasing input prices and tariffs. This management system must be based on an integrated production costs system analysis (PCSA, which would provide all operating costs management subsystems necessary information to design and make better management decisions. It provides a systematic analysis of more opportunities in knowledge, creating conditions of integrity mechanism knowledge object consisting of elements that show intersystem connections, each of which has its own defined and limited objectives, relationship with the environment.

A Classification Scheme for Production System Processes

DEFF Research Database (Denmark)

Sørensen, Daniel Grud Hellerup; Brunø, Thomas Ditlev; Nielsen, Kjeld

2018-01-01

Manufacturing companies often have difficulties developing production platforms, partly due to the complexity of many production systems and difficulty determining which processes constitute a platform. Understanding production processes is an important step to identifying candidate processes...... for a production platform based on existing production systems. Reviewing a number of existing classifications and taxonomies, a consolidated classification scheme for processes in production of discrete products has been outlined. The classification scheme helps ensure consistency during mapping of existing...

Lot-sizing for a single-stage single-product production system with rework of perishable production defectives

NARCIS (Netherlands)

Teunter, R.; Flapper, S.D.P.

2003-01-01

We consider a single-stage single-product production system. Produced units may be non-defective, reworkable defective, or non-reworkable defective. The system switches between production and rework. After producing a fixed number (N) of units, all reworkable defective units are reworked. Reworkable

Potential of sustainable biomass production systems in Texas

International Nuclear Information System (INIS)

Sanderson, M.A.; Hussey, M.A.; Wiselogel, A.E.

1992-01-01

Biomass production for liquid fuels feedstock from systems based on warm-season perennial grasses (WSPG) offers a sustainable alternative for forage-livestock producers in Texas. Such systems also would enhance diversity and flexibility in current production systems. Research is needed to incorporate biomass production for liquid fuels, chemicals, and electrical power into current forage-livestock management systems. Our research objectives were to (i) document the potential of several WSPG in diverse Texas environments for biomass feedstock production, (ii) conduct fundamental research on morphological development of WSPG to enhance management for biomass feedstock production, (iii) examine current on-farm production systems for opportunities to incorporate biomass production, and (iv) determine feedstock quality and stability during storage

Influence of dispatching rules on average production lead time for multi-stage production systems.

Science.gov (United States)

Hübl, Alexander; Jodlbauer, Herbert; Altendorfer, Klaus

2013-08-01

In this paper the influence of different dispatching rules on the average production lead time is investigated. Two theorems based on covariance between processing time and production lead time are formulated and proved theoretically. Theorem 1 links the average production lead time to the "processing time weighted production lead time" for the multi-stage production systems analytically. The influence of different dispatching rules on average lead time, which is well known from simulation and empirical studies, can be proved theoretically in Theorem 2 for a single stage production system. A simulation study is conducted to gain more insight into the influence of dispatching rules on average production lead time in a multi-stage production system. We find that the "processing time weighted average production lead time" for a multi-stage production system is not invariant of the applied dispatching rule and can be used as a dispatching rule independent indicator for single-stage production systems.

Toyota production system beyond large-scale production

CERN Document Server

Ohno, Taiichi

1998-01-01

In this classic text, Taiichi Ohno--inventor of the Toyota Production System and Lean manufacturing--shares the genius that sets him apart as one of the most disciplined and creative thinkers of our time. Combining his candid insights with a rigorous analysis of Toyota's attempts at Lean production, Ohno's book explains how Lean principles can improve any production endeavor. A historical and philosophical description of just-in-time and Lean manufacturing, this work is a must read for all students of human progress. On a more practical level, it continues to provide inspiration and instruction for those seeking to improve efficiency through the elimination of waste.

Systems evolution of waste and by-product management and bioenergy production

Energy Technology Data Exchange (ETDEWEB)

Okkonen, L.

2009-07-01

Evolutionary economic geography provides an inspiring extension to geographical systems analysis. The objective of this dissertation is to apply the systems approach and theory as an integrative framework of sustainable development, and as a capable analytical tool in the analysis of evolutionary resource management and energy production systems in their geographical contexts. The systems investigated are waste and by-product management and bioenergy production systems located in Finland and Scotland. Industrial ecosystem (IE) indicators are constructed for the analysis of waste and by-product management. They present both direct and indirect environmental, economic and social impacts of local waste management operations. The indicators are further applied in scenarios that dynamise the evolution of systems material and energy flows towards the balanced environmental, economic and social development, i.e. the vision of the industrial ecology. The results indicate that the energy use of waste derived fuels in regional cooperation has much potential in the development towards the optimal roundput model of industrial ecosystem. The business opportunities based on local woodfuels are investigated in the context of Scottish forestry policy. The evolution of institutional environments and arrangements of forest management in the Scottish Highlands enables a new type of rural entrepreneurship. The case study of Finnish heat entrepreneurship constructs a heat energy business model, including both the business architecture for product/service flows and the earning logics. Finally, a synthesis of the evolution of natural resource management systems is presented. The evolution process has many geographical contingent conditions, such as resources, technologies, institutions and organisations. Together with general socio-economic mechanisms, they affect the actors in spatial economic processes and interactions. Realisations of the system evolution are structures of economies

Mini Tuber Production in Potato Via Aeroponic System

Directory of Open Access Journals (Sweden)

Hussein Abdullah Ahmed AHMED

2018-02-01

Full Text Available The aeroponic production system is one of the new applications in soilless agriculture. This system is also an alternative seed production system for mini-tuber production of potato in terms of providing optimum growth conditions, enabling potato production to be free from diseases and pests and to make economic use of agricultural inputs. This system, which is independent of climatic conditions, has the advantage of improving the vegetative growth, delaying tuber formation, prolonging the vegetative period, increasing the tuber yield per plant and total tuber yield while decreasing the tuber weight. Due to the problems experienced in potato seedling tuber production in recent years, it emerged as an alternative production system for our country.

A comparison of production system life cycle models

Science.gov (United States)

Attri, Rajesh; Grover, Sandeep

2012-09-01

Companies today need to keep up with the rapidly changing market conditions to stay competitive. The main issues in this paper are related to a company's market and its competitors. The prediction of market behavior is helpful for a manufacturing enterprise to build efficient production systems. However, these predictions are usually not reliable. A production system is required to adapt to changing markets, but such requirement entails higher cost. Hence, analyzing different life cycle models of the production system is necessary. In this paper, different life cycle models of the production system are compared to evaluate the distinctive features and the limitations of each model. Furthermore, the difference between product life cycle and production life cycle is summarized, and the effect of product life cycle on production life cycle is explained. Finally, a production system life cycle model, along with key activities to be performed in each stage, is proposed specifically for the manufacturing sector.

Managing complexity of product mix and production flow in configure-to-order production systems

DEFF Research Database (Denmark)

Myrodia, Anna; Bonev, Martin; Hvam, Lars

2014-01-01

In designing configure-to-order production systems for a growing product variety, companies are challenged with an increased complexity for obtaining high productivity levels and cost-effectiveness. In academia several optimization methods and conceptual frameworks for substituting components, or...

Conception of Self-Construction Production Scheduling System

Science.gov (United States)

Xue, Hai; Zhang, Xuerui; Shimizu, Yasuhiro; Fujimura, Shigeru

With the high speed innovation of information technology, many production scheduling systems have been developed. However, a lot of customization according to individual production environment is required, and then a large investment for development and maintenance is indispensable. Therefore now the direction to construct scheduling systems should be changed. The final objective of this research aims at developing a system which is built by it extracting the scheduling technique automatically through the daily production scheduling work, so that an investment will be reduced. This extraction mechanism should be applied for various production processes for the interoperability. Using the master information extracted by the system, production scheduling operators can be supported to accelerate the production scheduling work easily and accurately without any restriction of scheduling operations. By installing this extraction mechanism, it is easy to introduce scheduling system without a lot of expense for customization. In this paper, at first a model for expressing a scheduling problem is proposed. Then the guideline to extract the scheduling information and use the extracted information is shown and some applied functions are also proposed based on it.

Development of anti-counterfeit consumer product authentication system

Directory of Open Access Journals (Sweden)

Olena V. Narimanova

2015-06-01

Full Text Available Aim of the research is to develop an anti-counterfeit consumer product authentication system. The main requirements for this system are formulated, the choice of method of consumer product authentication is substantiated. The scheme of anti-counterfeit consumer product authentication system is developed basing on previously proposed method of checking the QR-code integrity and authenticity. The proposed within the system consumer product authentication technology is simple, economical for implementation, does not require the external changes of product packaging, does not affect existing production process. The technology can be recommended for the use to private businesses and government institutions that are interested in the security of their products from counterfeiting, as well as tracking and removing from circulation the counterfeit consumer products.

The world market for subsea technology

International Nuclear Information System (INIS)

Kvinnsland, O.-J.

1994-01-01

The conference paper deals with the Petrobase 2000 system designed for forecasting and analysis of offshore activities covering files of exploration, field development and operations. The electronic tool system forecasts offshore activities in a total of 90 countries around the world. Exploration activities are analysed on the basis of prospectivity of basin geology, availability of exploration acreage, terms of conditions applying as well as availability exploration services, regionally or nationally. The field development file contains data on all known discoveries offshore and announced plans for development. For discoveries where no plans for development exist, the tool system allows for a probability analysis to identify the most likely scheme and scheduling. 10 figs

Simulation and preparation of surface EVA in reduced gravity at the Marseilles Bay subsea analogue sites

Science.gov (United States)

Weiss, P.; Gardette, B.; Chirié, B.; Collina-Girard, J.; Delauze, H. G.

2012-12-01

Extravehicular activity (EVA) of astronauts during space missions is simulated nowadays underwater in neutral buoyancy facilities. Certain aspects of weightlessness can be reproduced underwater by adding buoyancy to a diver-astronaut, therefore exposing the subject to the difficulties of working without gravity. Such tests were done at the COMEX' test pool in Marseilles in the 1980s to train for a French-Russian mission to the MIR station, for the development of the European HERMES shuttle and the COLUMBUS laboratory. However, space agencies are currently studying missions to other destinations than the International Space Station in orbit, such as the return to the Moon, NEO (near-Earth objects) or Mars. All these objects expose different gravities: Moon has one sixth of Earth's gravity, Mars has a third of Earth's gravity and asteroids have virtually no surface gravity; the astronaut "floats" above the ground. The preparation of such missions calls for a new concept in neutral buoyancy training, not on man-made structures, but on natural terrain, underwater, to simulate EVA operations such as sampling, locomotion or even anchoring in low gravity. Underwater sites can be used not only to simulate the reduced gravity that astronauts will experience during their field trips, also human factors like stress are more realistically reproduced in such environment. The Bay of Marseille hosts several underwater sites that can be used to simulate various geologic morphologies, such as sink-holes which can be used to simulate astronaut descends into craters, caves where explorations of lava tubes can be trained or monolithic rock structures that can be used to test anchoring devices (e.g., near Earth objects). Marseilles with its aerospace and maritime/offshore heritage hosts the necessary logistics and expertise that is needed to perform such simulations underwater in a safe manner (training of astronaut-divers in local test pools, research vessels, subsea robots and

Sonar Subsea Images of Large Temples, Mammoths, Giant Sloths. Huge Artwork Carvings, Eroded Cities, Human Images, and Paleo Astronomy Sites that Must be Over Ten Thousand Years Old.

Science.gov (United States)

Allen, R. L.

2016-12-01

Computer enhancing of side scanning sonar plots revealed images of massive art, apparent ruins of cities, and subsea temples. Some images are about four to twenty kilometers in length. Present water depths imply that many of the finds must have been created over ten thousand years ago. Also, large carvings of giant sloths, Ice Age elk, mammoths, mastodons, and other cold climate creatures concurrently indicate great age. In offshore areas of North America, some human faces have beards and what appear to be Caucasian characteristics that clearly contrast with the native tribal images. A few images have possible physical appearances associated with Polynesians. Contacts and at least limited migrations must have occurred much further in the ancient past than previously believed. Greatly rising sea levels and radical changes away from late Ice Age climates had to be devastating to very ancient civilizations. Many images indicate that these cultures were capable of construction and massive art at or near the technological level of the Old Kingdom in Egypt. Paleo astronomy is obvious in some plots. Major concerns are how to further evaluate, catalog, protect, and conserve the creations of those cultures.

Principles and practices of lean production applied in a metal structures production system

OpenAIRE

Carvalho, Rogério; Alves, Anabela Carvalho; Lopes, Isabel da Silva

2011-01-01

This paper presents a work undertaken in a metal structures production system in a company producing several assorted products for the civil construction. The work aim was to improve the production process, solving several productive problems encountered in the production system, such as: deliveries delays, long lead times, too many material handling, high stocks, errors and defects in metal structures assembly and production, and unnecessary motions. The identified problems were analyzed and...

Improving reservoir performance using new 'smart' well technology

International Nuclear Information System (INIS)

Roggensack, W.D.; Matthews, C.M.

1997-01-01

The technologies that were available in the past to improve reservoir performance include 3-D seismic, coiled tubing, horizontal wells, and PCP's. Future enabling technologies will also include multi-lateral wells, 'smart' wells, underbalanced drilling, and downhole fluids processing. A description of 'smart' well technology was given, defined as well completions which facilitate downhole monitoring and control of production to achieve maximum reserves recovery. The current development for 'smart' wells is focused on offshore and subsea wells for marginal field development and work-over mitigation, with the emphasis in system design for production control of horizontal and multi-lateral wells. Basic 'smart' well configuration, instrumentation and monitoring systems, applications of 'smart' well technology in the Western Canadian Sedimentary Basin, and future developments and applications for the technology in general, were also discussed. 30 figs

Design of Submarine Pipeline With Respect to Corrosion and Material Selection

OpenAIRE

El-Mogi, Hossam

2016-01-01

Master's thesis in Offshore technology : subsea technology Pipelines are an essential part of the oil and gas industry as they are the main means of transportation. As the offshore technology advances, subsea pipelines are being operated in more demanding environments. For the pipelines to operate efficiently, they have to be carefully designed. One of the main threats to the integrity of the pipeline is corrosion, which has caused many failures. Corrosion in subsea pipelines has different...

Consumer attitudes to different pig production systems

DEFF Research Database (Denmark)

de Barcellos, Marcia Dutra; Grunert, Klaus G; Zhou, Yanfeng

2013-01-01

In many Western countries, consumers have shown an increasing interest to the way in which food products are being produced. This study investigates Chinese consumers' attitudes towards different pig production systems by means of a conjoint analysis. While there has been a range of studies...... on Western consumers' attitudes to various forms of food production, little is known about the level of Chinese consumers' attitudes. A cross-sectional survey was carried out with 472 participants in six Chinese cities. Results indicate that Chinese consumers prefer industrial pig production systems, where...... from Cluster 1 focus almost exclusively on the food safety aspect (food safety focused). Consumers from cluster 2 (indifferent) show generally weak attitudes to pig production systems in general. Cluster 3 (industrial production oriented) stands out by being very positive about industrial, large size...

Measuring healthcare productivity - from unit to system level.

Science.gov (United States)

Kämäräinen, Vesa Johannes; Peltokorpi, Antti; Torkki, Paulus; Tallbacka, Kaj

2016-04-18

Purpose - Healthcare productivity is a growing issue in most Western countries where healthcare expenditure is rapidly increasing. Therefore, accurate productivity metrics are essential to avoid sub-optimization within a healthcare system. The purpose of this paper is to focus on healthcare production system productivity measurement. Design/methodology/approach - Traditionally, healthcare productivity has been studied and measured independently at the unit, organization and system level. Suggesting that productivity measurement should be done in different levels, while simultaneously linking productivity measurement to incentives, this study presents the challenges of productivity measurement at the different levels. The study introduces different methods to measure productivity in healthcare. In addition, it provides background information on the methods used to measure productivity and the parameters used in these methods. A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical information for managers. Findings - The study introduces different approaches and methods to measure productivity in healthcare. Practical implications - A pilot investigation of productivity measurement is used to illustrate the challenges of measurement, to test the developed measures and to prove the practical benefits for managers. Originality/value - The authors focus on the measurement of the whole healthcare production system and try to avoid sub-optimization. Additionally considering an individual patient approach, productivity measurement is examined at the unit level, the organizational level and the system level.

Toyota production system - one example to shipbuilding industry

OpenAIRE

Delmo Alves de Moura; Rui Carlos Botter

2017-01-01

The shipbuilding system can use the techniques used in the Toyota Production System as an example for its production process. Production should be lean, minimize defects, stop production and reduce or eliminate inventories. Lean production is regarded by many as simply an enhancement of mass production methods, whereas agility implies breaking out of the mass production mould and producing much more highly customized products - where the customer wants them in any quantity. In a product line ...

Animal production systems in the industrialised world.

Science.gov (United States)

Sørensen, J T; Edwards, S; Noordhuizen, J; Gunnarsson, S

2006-08-01

The production of food from animal origin is relatively stable in the industrialised world. However, animal production systems are changing dramatically with respect to location, herd size and specialisation. Increased pressure from a critical public is moving animal-based production towards systems such as organic production and loose-housing systems which allow the animals to better express normal behaviour. The focus on food safety promotes systems with a high degree of biosecurity, often associated with an increase in herd size and self-containment. The globalisation of agricultural trade and increased competition also favours an increase in herd size and specialisation. These trends also lead to regions with livestock-dense areas, giving rise to environmental concerns. Therefore, good farming practice regulations and systems to provide a higher level of transparency, such as quality risk management programmes, are being developed.

Ruminant production systems in developing countries: Resource utilization

International Nuclear Information System (INIS)

Devendra, C.

1989-01-01

Ruminant production systems are discussed with specific reference to the resource utilization required to support them. Particular focus is placed on the main production resources (animals and feeds) and their underutilization. The ruminant animals include buffaloes, cattle, goats, sheep and camels. With the exception of cattle and sheep, their numbers in developing countries account for between 94 and 100% of total world population. Their biological attributes, including inherent characteristics, feeding behaviour and metabolism, are summarized. The extent and availability of feed resources are considered; resources include permanent pastures, crop residues, agroindustrial by-products and non-conventional feeds. The prevailing ruminant production systems are classified into three main categories: extensive systems, systems incorporating arable cropping (roadside, communal and arable grazing systems; tethering and cut-and-carry feeding), and systems integrated with tree cropping. Their genesis and endurance with patterns of crop production and farming systems are discussed. Integrated systems, involving animals and tree crops, are potentially important. Prevailing ruminant production systems are unlikely to change in the foreseeable future, unless there are major shifts in resource use and the proposed new systems are demonstrably superior. Factors likely to influence future ruminant production systems are market requirements, available feed resources and growth in human populations. Two associated strategies for improvement are proposed: increased priority to buffaloes, goats, sheep and camels, consistent with their potential contribution to meat, milk and fibre supplies and draught power; and more complete utilization of the available feed ingredients and increased feed supplies

Introduction of China's Compulsory Product Certification System (Ⅰ)

Institute of Scientific and Technical Information of China (English)

无

2004-01-01

@@ Why does China establish a new Compulso-ry Product Certification System? For a long time, our compulsory product certification system has had problems such as lack of a unified management department, repeated assessments,repeated charging and no separation between certification activities and behaviors of law enforcement.The most obvious problem is that two certification management systems exist respectively for domestic products and imported products.

TAXATION SYSTEM AT INTRA PRODUCTION LEVEL

Directory of Open Access Journals (Sweden)

L. I. Podderegina

2006-01-01

Full Text Available The paper presents results of the analysis concerning taxation in the country at the level of an enteфrise and its structural sub-divisions in the period of transforming economy.Recommendations are given on the following aspects: modernization of income taxation system for natural persons; tax payment in case of wage computation; exclusion of tax payments and assignments fi-om production cost value which are not connected with the production process; tax computation for real property; evaluation of enterprise taxation level.The paper shows the possible cases concerning formation of tax payments and assignments of an enterprise and its structural sub-divisions.Taxation system is shown at the level of enterprise structural sub-divisions (shop, department, at the level of shop structural sub-divisions (section, team, for works to be executed by an individual person of the production process (operation, product, works, services. This system promotes to efficient functioning of intra-production economical relations.The paper provides possible variants of formation of taxation payments and assignments for an enterprise and its structural sub-divisions.

Profitability indicators of milk production cost center in intensive systems of production

Directory of Open Access Journals (Sweden)

Glauber dos Santos

2012-01-01

Full Text Available The objective was to estimate some profitability indicators of dairy cost center farms with a high volume of daily production in feedlot. The Intended was also to identify the components that had the greatest influence on the operational cost. We used data from three milk systems production, with the origin of the purebred Holsteins. It was considered as a milk cost center production all expenses related in lactating and dry cows. The methodology used total cost and operating cost in profitability analysis. A production system, by presenting gross margin, net positive result, was able to produce short, medium and long term. Another production system had a positive gross margin and net, with conditions to survive in the short and medium term. Finally, the third system of production has shown a negative gross margin presenting decapitalizing and entering into debt, as revenues were not enough to pay operating expenses even effective. The component items of the effective operational cost that exercised higher “impact” cost and income from milk were, in decreasing order, the feeding, labor, miscellaneous expenses, sanitation, energy, milking, reproduction, equipment rental, BST and taxes.

Vegetable Production System (Veggie)

Data.gov (United States)

National Aeronautics and Space Administration — The Vegetable Production System (Veggie) was developed to be a simple, easily stowed, high growth volume, low resource facility capable of producing fresh vegetables...

From Product to System Approaches in European Sustainable Product Policies: Analysis of the Package Concept of Heating Systems in Buildings

Directory of Open Access Journals (Sweden)

Maria Calero-Pastor

2017-09-01

Full Text Available Different policies with the goal of reducing energy consumption and other environmental impacts in the building sector coexist in Europe. Sustainable product polices, such as the Ecodesign and Energy Labelling Directives, have recently broadened the scope of their target product groups from a strict product approach to extended product and system approaches. Indeed, there is a potential for greater savings when the focus is at a system level rather than on regulating individual products. Product policies for space and water heating systems have recently introduced and implemented the package label, which is a modular approach, standing between the extended product and the system approaches. This paper presents a systematic analysis of the different system approaches of various policies from an engineering perspective. It analyses in detail the package concept and its features through a practical application using a real case study. It focuses on how the package concept can support decisions made in the building design phase and, in particular, how can support the choice of appropriate components based on estimating system performances. This brings building engineers and regulators closer regarding the use of more consistent data on energy performance. Finally, this paper highlights the need to improve the alignment of the building-related product policies with the Energy Performance of Buildings Directive.

The development of a subsea power transmission system for deep water boosting applications

Energy Technology Data Exchange (ETDEWEB)

Godinho, C.A.F. [Pirelli Cabos S.A. (Brazil); Campagnac, L.A. [Siemens S.A. (Brazil); Nicholson, A. [Tronic Electronics Services Ltd. (WEC); Magalhaes, W.M. de [PETROBRAS, Rio de Janeiro, RJ (Brazil)

1996-12-31

This paper presents the development of a sub sea power transmission in medium voltage and variable frequency, as a key system for application of Boosting technology and for electrical submersible Pumping in deep water wells. This work focuses on the design and manufacture of sub sea power cables and transformers for 1,000 m water depth. 8 refs., 6 figs.

Coupled dynamic analysis of subsea pipe laying operations

Energy Technology Data Exchange (ETDEWEB)

Silva, Danilo Machado Lawinscky da; Jacob, Breno Pinheiro [Coordenacao dos Programas de Pos-graduacao de Engenharia (COPPE/UFRJ), Rio de Janeiro, RJ (Brazil). Programa de Engenharia Civil. Lab. of Computational Methods and Offshore Systems

2009-12-19

It is recognized that deep water offshore oil exploitation activities requires the use of sophisticated computational tools to predict the behavior of floating offshore systems under the action of environmental loads. These computational tools should be able to perform coupled dynamic analyses, considering the non-linear interaction of the hydrodynamic behavior of the platform with the structural/hydrodynamic behavior of the mooring lines and risers, represented by Finite Element models. The use of such a sophisticated computational tool becomes mandatory not only for the design of production platforms, but also for the simulation of offshore installation operations. For instance, in the installation of submarine pipelines, the wall thickness design may not be governed by the pressure containment requirements of the pipeline during the operation, but by the installation process, specifically the combined action of bending, tension and hydrostatic pressure acting on the pipeline, that is also submitted to the motions of the lay barge. Therefore, the objective of this work is to present the results of numerical simulations of S-lay installation procedures using a computational tool that performs dynamic analysis coupling the structural behavior of the pipe with the hydrodynamic behavior of the vessel motions under environmental conditions. This tool rigorously considers the contact between the pipeline and its supports (lay barge, stinger, seabed). The results are compared to traditional pipe laying simulations based on RAO motions. (author)

System-theoretic analysis of due-time performance in production systems

Directory of Open Access Journals (Sweden)

David Jacobs

1995-01-01

Full Text Available Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipment size. This performance index is analyzed for both lean and mass manufacturing environments. In particular, it is shown that, to achieve a high due-time performance in a lean environment, the production system should be scheduled for a sufficiently small fraction of its average production rate. In mass production, due-time performance arbitrarily close to one can be achieved for any scheduling practice, up to the average production rate.

Field experiences using acrolein (2-propenal) for control of SRB and MIC in an offshore production flowline and onshore production facility in Western Australia

Energy Technology Data Exchange (ETDEWEB)

Shield, M.; Charlesworth, M.; Paakkonen, S.

2006-03-15

Acrolein, 2-propenal, was evaluated as a microbiocide for control of sulphate-reducing bacteria (SRB) in a sub-sea pipeline and an onshore process plant operated by ChevronTexaco Australia Pty Ltd (CVX) in the North West Shelf (NWS) of Australia. An initial trial compared the efficacy of acrolein with that of a glutaraldehyde, quaternary amine blend (GQB) for control of SRB implicated in microbiologically induced corrosion (MIC) of the sub-sea pipeline. Based on improved performance, acrolein subsequently replaced the GQB for routine microbiocide treatment of the pipeline. In addition, a plant trial assessed the impact of acrolein supplementation of the existing tetrakishydroxy-methyl phosphonium sulphate (THPS) microbiocide programme for control of SRB in process plant operations. This paper overviews both the pipeline and plant trials as well as the programme implementation of acrolein microbiocide for routine pipeline treatment. In addition to an improved performance and safety profile, complete conversion of the microbiocide programme to acrolein is projected to result in direct savings of 40%, with further potential for secondary operational cost savings. on behalf of Ampol and Caltex; and, in 1964, the company discovered oil in commercial quantities on Barrow Island (BWI) off the North West Shelf of Australia. Today, CVX continues hydrocarbon production operations on BWI with over 300 million barrels produced since inception. BWI volumes have been augmented since 1989 through hydrocarbon recovery operations near Thevenard Island (TVI), a small island located 25 km north-north west of Onslow. To date, more than 146 million barrels have been processed through facilities on TVI. With the process plant covering only a small corner of the island, the majority of land mass on TVI is classified as a nature reserve for the protection of plants and animals. Important wildlife found on the island include green and flatback turtles that nest on the islands beaches. In

Conceptual Modelling for Product Configuration Systems

DEFF Research Database (Denmark)

Shafiee, Sara

Individual customization of goods and processes in different industries leads to complexity due to a growing mix of products both regarding characteristics of products and support services. In order to eliminate complexity and challenges in product/process customizing, smart IT systems called...... Product Configuration Systems (PCS), have been proposed as the solution both by researchers and practitioners and various benefits are mentioned from utilizing PCSs. Based on the latest literature, there are challenges reported in all phases of PCS projects including planning, development......, and documentation. Moreover, the challenges become more serious when it involves complicated products/processes in engineer-to-order (ETO) companies. The purpose of this thesis is to contribute to the existing knowledge of managing PCS projects by proposing frameworks and tools to address some of the main...

Systems, methods and apparatus for developing and maintaining evolving systems with software product lines

Science.gov (United States)

Hinchey, Michael G. (Inventor); Rash, James L. (Inventor); Pena, Joaquin (Inventor)

2011-01-01

Systems, methods and apparatus are provided through which an evolutionary system is managed and viewed as a software product line. In some embodiments, the core architecture is a relatively unchanging part of the system, and each version of the system is viewed as a product from the product line. Each software product is generated from the core architecture with some agent-based additions. The result may be a multi-agent system software product line.

Operational experience from the satellite fields Statfjord Nord and East; Driftserfaringer fra satellittfeltene Statfjord Nord og Oest

Energy Technology Data Exchange (ETDEWEB)

Retterdal, Atle; Hansen, Hans Birger [Statoil, Stavanger (Norway)

1999-07-01

Since production started on the satellite fields Statfjord Nord and East in 1995 and 1994, respectively, some opportunities for improvement have been discovered and realized both with respect to the subsea systems and the operational routines and philosophy. This presentation discusses the improvement projects. It is known from experience that creative ideas usually originate at the interfaces between supplier/customer, engineers with different backgrounds, or between different technologies. The interface between supplier and operator is very important for discovering creative solutions. The interface between Statoil and the suppliers of underwater equipment is not sufficiently well developed on the operational side.

Simulation Based Optimization for World Line Card Production System

Directory of Open Access Journals (Sweden)

Sinan APAK

2012-07-01

Full Text Available Simulation based decision support system is one of the commonly used tool to examine complex production systems. The simulation approach provides process modules which can be adjusted with certain parameters by using data relatively easily obtainable in production process. World Line Card production system simulation is developed to evaluate the optimality of existing production line via using discrete event simulation model with variaty of alternative proposals. The current production system is analysed by a simulation model emphasizing the bottlenecks and the poorly utilized production line. Our analysis identified some improvements and efficient solutions for the existing system.

Design of Agricultural Cleaner Production Technology System

OpenAIRE

Hu, Jun-mei; Wang, Xin-jie

2009-01-01

Based on the introduction of agricultural cleaner production, technology system design of planting cleaner production is discussed from five aspects of water-saving irrigation technology, fertilization technology, diseases and insects control technology, straw comprehensive utilization technology and plastic film pollution control technology. Cleaner production technology system of livestock and poultry raise is constructed from the aspects of source control technology, reduction technique in...

System for extracting protein from a fermentation product

Science.gov (United States)

Lawton, Jr., John Warren; Bootsma, Jason Alan; Lewis, Stephen Michael

2016-04-26

A method of producing bioproducts from a feedstock in a system configured to produce ethanol and distillers grains from a fermentation product is disclosed. A system configured to process feedstock into a fermentation product and bioproducts including ethanol and meal is disclosed. A bioproduct produced from a fermentation product produced from a feedstock in a biorefining system is disclosed.

Energy condensed packaged systems. Composition, production, properties

Directory of Open Access Journals (Sweden)

Igor L. Kovalenko

2015-03-01

Full Text Available In this paper it is presented the substantiation of choice of fuel phase composition and optimal technology of emulsion production on the basis of binary solution of ammonium and calcium nitrates, which provide the obtaining of energy condensed packaged systems with specified properties. The thermal decomposition of energy condensed systems on the basis of ammonium nitrate is investigated. It is shown that the fuel phase of emulsion systems should be based on esters of polyunsaturated acids or on combinations thereof with petroleum products. And ceresin or petroleum wax can be used as the structuring additive. The influence of the technology of energy condensed systems production on the physicochemical and detonation parameters of emulsion explosives is considered. It is shown the possibility of obtaining of emulsion systems with dispersion of 1.3...1.8 microns and viscosity higher than 103 Pa∙s in the apparatus of original design. The sensitizing effect of chlorinated paraffin CP-470 on the thermolysis of energy condensed emulsion system is shown. The composition and production technology of energy condensed packaged emulsion systems of mark Ukrainit-P for underground mining in mines not dangerous on gas and dust are developed.

Power Take-off System for Marine Renewable Devices, CRADA Number CRD-14-566

Energy Technology Data Exchange (ETDEWEB)

Muljadi, Eduard [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2017-09-13

Ocean Renewable Power Company (ORPC) proposes a project to develop and test innovative second-generation power take-off (PTO) components for the U.S. Department of Energy's 2013 FOA: Marine and Hydrokinetic System Performance Advancement, Topic Area 2 (Project). Innovative PTO components will include new and improved designs for bearings, couplings and a subsea electrical generator. Specific project objectives include the following: (1) Develop components for an advanced PTO suitable for MHK devices; (2) Bench test these components; (3) Assess the component and system performance benefits; (4) Perform a system integration study to integrate these components into an ORPC hydrokinetic turbine. National Renewable Energy Laboratory (NREL) will participate on the ORPC lead team to review design of the generator and will provide guidance on the design. Based on inputs from the project team, NREL will also provide an economic analysis of the impacts of the proposed system performance advancements.

Floating on the margins [Environmental issues for floating production platforms

International Nuclear Information System (INIS)

Grimshaw, R.

1997-01-01

The main environmental issues challenging oilfield development using floating production platforms in harsh environments such as the Atlantic frontier are discussed. These fall into two broad categories -operating conditions and biological disturbance. Particular combinations of wind and currents can lead to extremely difficult operating conditions through which floating units are expected to maintain production for economic reasons. This imposes stringent conditions on the design and construction of tanker hulls and of risers to enable them to remain connected at all times. Prediction of wind and wave forces is a crucial element of operational and safety planning. Fauna in seabed sediments disturbed by pipeline laying often relocate but some seeding back of colonies may be required in hard rock areas. Migration routes for cetaceans and the feeding grounds of marine birds must be considered and the potential long and short term damage to commercial fisheries through discharges need to be assessed. A significant risk is the interaction of sub-sea facilities and fishing gear and oil spills. Operational and accidental discharges of production chemicals, produced water containing oil, deck drainage and treated sewage, and discharges to air from flaring and utility exhausts are of major environmental concern calling for mitigation and protection measures and contingency plans. Some of the environmental issues associated with decommissioning are reduced by the use of floating platforms but there are global and national regulations governing the process. (UK)

Bioelectrochemical Systems for Indirect Biohydrogen Production

KAUST Repository

Regan, John M.

2014-01-01

Bioelectrochemical systems involve the use of exoelectrogenic (i.e., anode-reducing) microbes to produce current in conjunction with the oxidation of reduced compounds. This current can be used directly for power in a microbial fuel cell, but there are alternate uses of this current. One such alternative is the production of hydrogen in a microbial electrolysis cell (MEC), which accomplishes cathodic proton reduction with a slight applied potential by exploiting the low redox potential produced by exoelectrogens at the anode. As an indirect approach to biohydrogen production, these systems are not subject to the hydrogen yield constraints of fermentative processes and have been proven to work with virtually any biodegradable organic substrate. With continued advancements in reactor design to reduce the system internal resistance, increase the specific surface area for anode biofilm development, and decrease the material costs, MECs may emerge as a viable alternative technology for biohydrogen production. Moreover, these systems can also incorporate other value-added functionalities for applications in waste treatment, desalination, and bioremediation.

Production grid systems and their programming

CERN Document Server

Kacsuk, P; Stefan, P

2004-01-01

Summary form only given. There are a large variety of grid test-beds that can be used for experimental purposes by a small community. However, the number of production grid systems that can be used as a service for a large community is very limited. The current tutorial provides introduction to three of these very few production grid systems. They represent different models and policies of using grid resources and hence understanding and comparing them is an extremely useful exercise to everyone interested in grid technology. The Hungarian ClusterGrid infrastructure connects clusters during the nights and weekends. These clusters are used during the day for educational purposes at the Hungarian universities and polytechnics. Therefore, a unique feature of this grid is the switching mechanism by which the day time and night time working modes are loaded to the computers. In order to manage the system as a production, one, the system is homogeneous, all the machines should install the same grid software package...

The ATLAS Production System Evolution

CERN Document Server

Borodin, Mikhail; The ATLAS collaboration

2017-01-01

The second generation of the ATLAS Production System called ProdSys2 is a distributed workload manager that runs daily hundreds of thousands of jobs, from dozens of different ATLAS-specific workflows, across more than a hundred heterogeneous sites. It achieves high utilization by combining dynamic job definition based upon many criteria, such as input and output size, memory requirements and CPU consumption, with manageable scheduling policies and by supporting different kinds of computational resources, such as GRID, clouds, supercomputers and volunteer computers. The system dynamically assigns a group of jobs (task) to a group of geographically distributed computing resources. Dynamic assignment and resource utilization is one of the major features of the system. The Production System has a sophisticated job fault recovery mechanism, which efficiently allows running multi-terabyte tasks without human intervention. We have implemented new features which allow automatic task submission and chaining of differe...

Wireless sensing on surface hydrocarbon production systems

International Nuclear Information System (INIS)

Kane, D; McStay, D; Mulholland, J; Costello, L

2009-01-01

The use of wireless sensor networks for monitoring and optimising the performance of surface hydrocarbon production systems is reported. Wireless sensor networks are shown to be able to produce comprehensively instrumented XTs and other equipment that generate the data required by Intelligent Oilfield systems. The information produced by such systems information can be used for real-time operational control, production optimization and troubleshooting.

Task management in the new ATLAS production system

International Nuclear Information System (INIS)

De, K; Golubkov, D; Klimentov, A; Potekhin, M; Vaniachine, A

2014-01-01

This document describes the design of the new Production System of the ATLAS experiment at the LHC [1]. The Production System is the top level workflow manager which translates physicists' needs for production level processing and analysis into actual workflows executed across over a hundred Grid sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. In the new design, the main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, DEFT manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. The JEDI component then dynamically translates the task definitions from DEFT into actual workload jobs executed in the PanDA Workload Management System [2]. We present the requirements, design parameters, basics of the object model and concrete solutions utilized in building the new Production System and its components.

Photochemical hydrogen production system

International Nuclear Information System (INIS)

Copeland, R.J.

1990-01-01

Both technical and economic factors affect the cost of producing hydrogen by photochemical processes. Technical factors include the efficiency and the capital and operating costs of the renewable hydrogen conversion system; economic factors include discount rates, economic life, credit for co-product oxygen, and the value of the energy produced. This paper presents technical and economic data for a system that generates on-peak electric power form photochemically produced hydrogen

Modeling of Agile Intelligent Manufacturing-oriented Production Scheduling System

Institute of Scientific and Technical Information of China (English)

Zhong-Qi Sheng; Chang-Ping Tang; Ci-Xing Lv

2010-01-01

Agile intelligent manufacturing is one of the new manufacturing paradigms that adapt to the fierce globalizing market competition and meet the survival needs of the enterprises, in which the management and control of the production system have surpassed the scope of individual enterprise and embodied some new features including complexity, dynamicity, distributivity, and compatibility. The agile intelligent manufacturing paradigm calls for a production scheduling system that can support the cooperation among various production sectors, the distribution of various resources to achieve rational organization, scheduling and management of production activities. This paper uses multi-agents technology to build an agile intelligent manufacturing-oriented production scheduling system. Using the hybrid modeling method, the resources and functions of production system are encapsulated, and the agent-based production system model is established. A production scheduling-oriented multi-agents architecture is constructed and a multi-agents reference model is given in this paper.

Flexibility of production systems and prepare-finish time

Directory of Open Access Journals (Sweden)

Vukićević Milan R.

2006-01-01

Full Text Available One of the specificities of the large-serial and mass production is the almost neglected percentage of prepare-finish time in the production cycle. In the conditions of today dominant discontinuous production, it becomes a significant element of the production cycle. The eastern (Japan doctrine of increasing the flexibility of the production systems, is based inter alia also on the extreme reduction of the prepare-finish time. For this reason, the aim of this study was to identify the types and percentages of individual jobs within the group of prepare-finish jobs. The sample consisted of 3 (three production systems for the production of joinery, with the discontinuous production system. The research shows that the percentage of time of the jobs installation of work instruments, regulation of processing regime, and removal of work instruments is extremely long and that it ranges between 11.83% and 18.93% of the shift time. The reasons of the high percentage of these jobs are the wide range of products and the absence of the rationalisation of prepare-finish jobs. Within the efforts to minimize the effects of disruption and to increase the flexibility of the production systems, the rationalisation of prepare-finish jobs is the unavoidable condition.

Survey on the life cycle system of a product with shared information; Joho kyoyugata product life cycle system ni kansuru chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report provides and proposes new concept and optimization technology on the life cycle system of product for emission minimum. For the proposed life cycle system of product with shared information, the global emission minimum is realized by considering the final emission, the information is given to the product and shared in all the life cycle system, the information sending function is considered from the product, and the information necessary for material processing are actively used. For this life cycle system of product, development of the information model for the system, development of the technology of data saving, renewing, searching and sending, development of sensing and re-using technologies of the product for life cycle, development of the technology attaching information in the product for emission minimum, design of the guidelines of material composition, and research and development of materials for emission minimum are extracted and provided as tasks. 26 refs., 69 figs., 8 tabs.

Towards unification of product and enterprise system descriptions

CSIR Research Space (South Africa)

Erasmus, J

2015-06-01

Full Text Available are utilised by enterprises and some product systems contain entire businesses, such as the operating and maintenance business of a power station. Thus, products are part of enterprises, but enterprises may also be part of product systems. To enable the design...

Linking environment-productivity trade-offs and correlated uncertainties: Greenhouse gas emissions and crop productivity in paddy rice production systems

International Nuclear Information System (INIS)

Hayashi, Kiyotada; Nagumo, Yoshifumi; Domoto, Akiko

2016-01-01

In comparative life cycle assessments of agricultural production systems, analyses of both the trade-offs between environmental impacts and crop productivity and of the uncertainties specific to agriculture such as fluctuations in greenhouse gas (GHG) emissions and crop yields are crucial. However, these two issues are usually analyzed separately. In this paper, we present a framework to link trade-off and uncertainty analyses; correlated uncertainties are integrated into environment-productivity trade-off analyses. We compared three rice production systems in Japan: a system using a pelletized, nitrogen-concentrated organic fertilizer made from poultry manure using closed-air composting techniques (high-N system), a system using a conventional organic fertilizer made from poultry manure using open-air composting techniques (low-N system), and a system using a chemical compound fertilizer (conventional system). We focused on two important sources of uncertainties in paddy rice cultivation—methane emissions from paddy fields and crop yields. We found trade-offs between the conventional and high-N systems and the low-N system and the existence of positively correlated uncertainties in the conventional and high-N systems. We concluded that our framework is effective in recommending the high-N system compared with the low-N system, although the performance of the former is almost the same as the conventional system. - Highlights: • Correlated uncertainties were integrated into environment-productivity trade-offs. • Life cycle GHG emissions and crop yields were analyzed using field and survey data. • Three rice production systems using chemical or organic fertilizers were compared. • There were portfolio (insurance) effects in matured technologies. • Analysis of trade-offs and correlated uncertainties will be useful for decisions.

Linking environment-productivity trade-offs and correlated uncertainties: Greenhouse gas emissions and crop productivity in paddy rice production systems

Energy Technology Data Exchange (ETDEWEB)

Hayashi, Kiyotada, E-mail: hayashi@affrc.go.jp [Institute for Agro-Environmental Sciences, National Agriculture and Food Research Organization, 3-1-3 Kannondai, Tsukuba, Ibaraki 305-8604 (Japan); Nagumo, Yoshifumi [Crop Research Center, Niigata Agricultural Research Institute, 857 Nagakura-machi, Nagaoka, Niigata 940-0826 (Japan); Domoto, Akiko [Mie Prefecture Agricultural Research Institute, 530 Kawakita-cho, Ureshino, Matsusaka, Mie 515-2316 (Japan)

2016-11-15

In comparative life cycle assessments of agricultural production systems, analyses of both the trade-offs between environmental impacts and crop productivity and of the uncertainties specific to agriculture such as fluctuations in greenhouse gas (GHG) emissions and crop yields are crucial. However, these two issues are usually analyzed separately. In this paper, we present a framework to link trade-off and uncertainty analyses; correlated uncertainties are integrated into environment-productivity trade-off analyses. We compared three rice production systems in Japan: a system using a pelletized, nitrogen-concentrated organic fertilizer made from poultry manure using closed-air composting techniques (high-N system), a system using a conventional organic fertilizer made from poultry manure using open-air composting techniques (low-N system), and a system using a chemical compound fertilizer (conventional system). We focused on two important sources of uncertainties in paddy rice cultivation—methane emissions from paddy fields and crop yields. We found trade-offs between the conventional and high-N systems and the low-N system and the existence of positively correlated uncertainties in the conventional and high-N systems. We concluded that our framework is effective in recommending the high-N system compared with the low-N system, although the performance of the former is almost the same as the conventional system. - Highlights: • Correlated uncertainties were integrated into environment-productivity trade-offs. • Life cycle GHG emissions and crop yields were analyzed using field and survey data. • Three rice production systems using chemical or organic fertilizers were compared. • There were portfolio (insurance) effects in matured technologies. • Analysis of trade-offs and correlated uncertainties will be useful for decisions.

Ventilation system for 99Mo production apparatus

International Nuclear Information System (INIS)

Izumo, Mishiroku; Okane, Shougo; Sorita, Takami; Aoyama, Saburou

1978-04-01

In production of 20 Ci 99 Mo from 235 U fission, about 120 Ci of radioiodine ( 131 I, 132 I, and 133 I) is involved. To remove airborne radioiodine from the exhaust air from production apparatus and minimize radioiodine release to the atmosphere, the ventilation system is equipped with 2 units of Model-FD charcoal filter (KI 3 -Impregnated charcoal 2 inch thick of Barnebey-Cheney Co.). From September 1976 to December 1977, 21 runs of 99 Mo production involving airborne radioiodine were carried out. The ventilation system was operated continuously for the whole 15 months period; variation in removal efficiency of airborne radioiodine from the exhaust air stream was observed. In the runs valuable experiences were gained in operation and maintenance of the ventilation system including activated charcoal filter and health-physics management of such facility. Following are the results: (1) Airborne radioiodine from 99 Mo production apparatus is reduced to 10 -3 % of the original quantity. (2) When the ventilation system is operated at a maximum air flow rate through the filter, the average efficiency during 15 months is over 98%. (3) Airborne radioiodine released from 99 Mo production apparatus to the ventilation system is less than 5% particulate iodine and alkyl iodines and more than 95% inorganic iodine. (4) Airborne radioiodine released from the stack is less than 28 μCi/run, which is below the limit in regulations on Radioisotope Production Laboratory. (auth.)

Expected energy production evaluation for photovoltaic systems

DEFF Research Database (Denmark)

Ding, Yi; Østergaard, Jacob; Peng, Wang

2011-01-01

A photovoltaic (PV) system consists of many solar panels, which are connected in series, parallel or a combination of both. Energy production for the PV system with various configurations is different. In this paper, a methodology is developed to evaluate and analyze the expected energy production...

Productivity changes in OECD healthcare systems: bias-corrected Malmquist productivity approach.

Science.gov (United States)

Kim, Younhee; Oh, Dong-Hyun; Kang, Minah

2016-10-01

This study evaluates productivity changes in the healthcare systems of 30 Organization for Economic Co-operation and Development (OECD) countries over the 2002-2012 periods. The bootstrapped Malmquist approach is used to estimate bias-corrected indices of healthcare performance in productivity, efficiency and technology by modifying the original distance functions. Two inputs (health expenditure and school life expectancy) and two outputs (life expectancy at birth and infant mortality rate) are used to calculate productivity growth. There are no perceptible trends in productivity changes over the 2002-2012 periods, but positive productivity improvement has been noticed for most OECD countries. The result also informs considerable variations in annual productivity scores across the countries. Average annual productivity growth is evenly yielded by efficiency and technical changes, but both changes run somewhat differently across the years. The results of this study assert that policy reforms in OECD countries have improved productivity growth in healthcare systems over the past decade. Countries that lag behind in productivity growth should benchmark peer countries' practices to increase performance by prioritizing an achievable trajectory based on socioeconomic conditions. For example, relatively inefficient countries in this study indicate higher income inequality, corresponding to inequality and health outcomes studies. Although income inequality and globalization are not direct measures to estimate healthcare productivity in this study, these issues could be latent factors to explain cross-country healthcare productivity for future research. Copyright © 2016 John Wiley & Sons, Ltd. Copyright © 2016 John Wiley & Sons, Ltd.

PLM system support for modular product development

DEFF Research Database (Denmark)

Bruun, Hans Peter Lomholt; Mortensen, Niels Henrik; Harlou, Ulf

2015-01-01

A modular design strategy both enables, but also demands, parallelism in design activities and collaboration between a diversity of disciplines in companies, which often involves supporting computer-based tools for enhancing interaction, design management, and communication. Product data management...... (PDM) and product lifecycle management (PLM) systems offer support by automating and managing some of the operational complexity of modular design activities. PLM system tools are used for handling a variety of product definitions, to manage workflow of development activities, and to measure relational...... properties such as cost and performance. Companies often use a PLM tool for management of CAD files, documents, and drawings, but they do not take advantage of the full potential of the PLM system to support the development activities of modular product designs. The key result of this paper...

Maximising methane production in stressed fermentation systems for swine production units

Energy Technology Data Exchange (ETDEWEB)

Hill, D T

1984-01-01

For economic reasons, digestion systems must be designed to allow the most compact plant. This forces heavy organic loading and relatively short detention times. Consequently, the digestion system is operating in the region approaching instability. An investigation into the effects on methane productivity of the method used to load anaerobic digesters has shown that when operating in regions approaching stress the method of loading plays a major role in maximising energy output. Since the digestion system is designed for steady-state loading, while the actual operating conditions are dynamic, the loading of the system actually varies greatly and is never at steady state. In loading the digestion system, two methods are available. Either Volatile Solids (VS) loading concentration will vary and loading volume remain constant or loading volume will vary and VS loading concentration remain constant. The choice of which operational method is used in a digestion system already operating under heavy loading greatly affects methane productivity. The internal energy usage of the plant also is affected. Results indicate that gross methane production is approximately 33% higher and VS reduction is increased by 28% for the fermentation plant operating with a varying detention time when compared to operating the same plant with a varying loading concentration. (Refs. 14).

Customized Pull Systems for Single-Product Flow Lines

NARCIS (Netherlands)

Gaury, E.G.A.; Kleijnen, J.P.C.; Pierreval, H.

1998-01-01

Traditionally pull production systems are managed through classic control systems such as Kanban, Conwip, or Base stock, but this paper proposes ‘customized’ pull control. Customization means that a given production line is managed through a pull control system that in principle connects each stage

A system dynamics model to determine products mix

Directory of Open Access Journals (Sweden)

Mahtab Hajghasem

2014-02-01

Full Text Available This paper presents an implementation of system dynamics model to determine appropriate product mix by considering various factors such as labor, materials, overhead, etc. for an Iranian producer of cosmetic and sanitary products. The proposed model of this paper considers three hypotheses including the relationship between product mix and profitability, optimum production capacity and having minimum amount of storage to take advantage of low cost production. The implementation of system dynamics on VENSIM software package has confirmed all three hypotheses of the survey and suggested that in order to reach better mix product, it is necessary to reach optimum production planning, take advantage of all available production capacities and use inventory management techniques.

Expert system for estimating LWR plutonium production

International Nuclear Information System (INIS)

Sandquist, G.M.

1988-01-01

An Artificial Intelligence-Expert System called APES (Analysis of Proliferation by Expert System) has been developed and tested to permit a non proliferation expert to evaluate the capability and capacity of a specified LWR reactor and PUREX reprocessing system for producing and separating plutonium even when system information may be limited and uncertain. APES employs an expert system coded in LISP and based upon an HP-RL (Hewlett Packard-Representational Language) Expert System Shell. The user I/O interface communicates with a blackboard and the knowledge base which contains the quantitative models required to describe the reactor, selected fission product production and radioactive decay processes, Purex reprocessing and ancillary knowledge

MILK PRODUCTION IN INTEGRATED SYSTEMS: REVIEW

Directory of Open Access Journals (Sweden)

H. A. Z. Biavatti

2014-09-01

Full Text Available The pasture degradation and thermic stress are in economic trouble for milk producers. The use of silvopastoral system (SSP is an important tool to minimize this loss, since it combines the production and conservation of natural resources, furthermore, provides the producer the potential to diversify the source of income of rural property, it is possible sale or own use of the products generated by the trees as timber, firewood and fruit. With the implementation of the SSP is possible to attenuate the effects of high temperatures caused by direct solar incidence on the animals, providing an ideal thermal comfort zone, resulting in increased production, it will expend less energy so that the animals are able to be as close as possible the necessary thermal comfort. Besides, with the adoption of this system, occurs a minor pasture degradation by promoting the formation of a microclimate favoring their establishment and maintenance, in addition to stabilizing soils, unpacked action of roots and preventing erosion. The purpose of this work was study the main aspects that affect the production of milk, proposing the use of integrated systems to minimize losses from thermal stress and degradation of pastures.

Toyota production system - one example to shipbuilding industry

Directory of Open Access Journals (Sweden)

Delmo Alves de Moura

2017-09-01

Full Text Available The shipbuilding system can use the techniques used in the Toyota Production System as an example for its production process. Production should be lean, minimize defects, stop production and reduce or eliminate inventories. Lean production is regarded by many as simply an enhancement of mass production methods, whereas agility implies breaking out of the mass production mould and producing much more highly customized products - where the customer wants them in any quantity. In a product line context, it amounts to striving for economies of scope, rather than economies of scale ideally serving ever smaller niche markets, even quantities of one, without the high cost traditionally associated with customization. A lean company may be thought of as a very productive and cost efficient producer of goods or services.

Impact of product platforms on lean production systems : evidence from industrial machinery manufacturing

NARCIS (Netherlands)

Alblas, A.A.; Wortmann, J.C.

2012-01-01

The present study describes the effects of product platform changes on lean production systems. Current research into product platforms focuses mostly on the development stage. However, although the initial development of platforms is an important issue, product platforms often evolve during later

Production components and yield of bushing snap bean in conventional and organic production systems

Directory of Open Access Journals (Sweden)

Guilherme Renato Gomes

2017-10-01

Full Text Available Production systems influence crops differently, mainly in terms of yield. However, there are few studies that have evaluated different bushing snap bean genotypes in different systems. Thus, this study aimed to evaluate the production components and yield of bushing snap beans in conventional and organic production systems. The experimental design was a randomized complete block, in a factorial 6 × 2 arrangement, corresponding to six genotypes and two production systems, with three replications. The genotypes Isla Manteiga Baixo®, Isla Macarrão Baixo®, Feltrin Vicenza Amarelo Baixo®, and Feltrin Macarrão Napoli®, UEL 1, and UEL 2 were submitted to the following determinations: days to flowering; plant height; medium number of pods per plant; average pod mass, length, and diameter; and yield of commercial pods. A joint analysis of variance was conducted by applying the F test, with mean comparison performed using the Tukey’s test (p < 0.05. Anthesis of the genotypes Feltrin Vicenza Amarelo Baixo, UEL 2, Isla Macarrão Baixo, and Feltrin Macarrão Napoli is anticipated in the conventional production system. The genotype UEL 2 shows higher precocity in anthesis within the conventional system. The genotypes Isla Manteiga Baixo and UEL 1 produce more pods per plant in the conventional system. In the organic system, the genotype Feltrin Macarrão Napoli produces double the number of pods per plant compared with Isla Manteiga Baixo. The organic system leads to greater plant height and average mass, length, and diameter of pods in relation to the conventional system. The commercial pod yield of bushing snap bean is not altered by differences in the production system or genotype.

The integrated control of production-inventory systems

NARCIS (Netherlands)

Nyen, van P.L.M.

2005-01-01

In this thesis, we investigate a multi-product, multi-machine production-inventory (PI) system that is characterized by: ?? relatively high and stable demand; ?? uncertainty in the precise timing of demand; ?? variability in the production process; ?? job shop routings; ?? considerable setup times

Independence and Product Systems

OpenAIRE

Skeide, Michael

2003-01-01

Starting from elementary considerations about independence and Markov processes in classical probability we arrive at the new concept of conditional monotone independence (or operator-valued monotone independence). With the help of product systems of Hilbert modules we show that monotone conditional independence arises naturally in dilation theory.

Evaluation of pig production practices, constraints and opportunities for improvement in smallholder production systems in Kenya.

Science.gov (United States)

Mbuthia, Jackson Mwenda; Rewe, Thomas Odiwuor; Kahi, Alexander Kigunzu

2015-02-01

This study evaluated pig production practices by smallholder farmers in two distinct production systems geared towards addressing their constraints and prospects for improvement. The production systems evaluated were semi-intensive and extensive and differed in remoteness, market access, resource availability and pig production intensity. Data were collected using structured questionnaires where a total of 102 pig farmers were interviewed. Qualitative and quantitative research methods were employed to define the socioeconomic characteristics of the production systems, understanding the different roles that pigs play, marketing systems and constraints to production. In both systems, regular cash income and insurance against emergencies were ranked as the main reasons for rearing pigs. Marketing of pigs was mainly driven by the type of production operation. Finances, feeds and housing were identified as the major constraints to production. The study provides important parameters and identifies constraints important for consideration in design of sustainable production improvement strategies. Feeding challenges can be improved through understanding the composition and proper utilization of local feed resources. Provision of adequate housing would improve the stocking rates and control mating.

NOAA Soil Moisture Products System (SMOPS) Daily Blended Products

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — The Soil Moisture Operational Products System (SMOPS) combines soil moisture retrievals from multiple satellite sensors to provide a global soil moisture map with...

Underwater sound and vibrations due to oil & gas activities

NARCIS (Netherlands)

Beek, P.J.G. van; Binnerts, B.; Nennie, E.D.; Benda-Beckmann, A.M. von

2014-01-01

In the oil & gas industry there is a trend towards more subsea activities. To improve gas recovery from existing and new fields at greater depths, the produced gas will be compressed, processed and transported via subsea templates and underwater networks (pipelines, flexible risers, etc.). Besides

Systems for Nuclear Auxiliary Power annual report, government fiscal year 1976/TQ

International Nuclear Information System (INIS)

1976-01-01

The overall objective of the Systems for Nuclear Auxiliary Power (SNAP) Program is to continue system and component engineering activities relating to the zirconium hydride (ZrH) reactor. The specific objectives for FY 1976/TQ were to: (1) study standardized ZrH reactor space power systems and components, (2) perform preconceptual analysis and design of ZrH reactor--organic Rankine power systems for subsea applications, (3) conduct fuel and hydrogen barrier investigations, (4) perform system studies in support of the Department of Defense and their contractors as directed by ERDA, (5) test components, and (6) provide for material disposal and facility surveillance. In the study, representative systems which utilize Brayton, Rankine, and Stirling cycle power conversion units as well as thermoelectric modules, are analyzed at power levels of 10, 25, 50, and 75 kWe. Waste heat rejection is accomplished by concentric, cylindrical space radiators which can be nested during launch for space shuttle integration. Subsequent studies, which supported this effort, were completed and provided useful information on system reliability and survivability

HIGH PRODUCTIVITY VACUUM BLASTING SYSTEM

International Nuclear Information System (INIS)

McPhee, William S.

1999-01-01

The objective of this project is to improve the productivity and lower the expense of existing vacuum blasting technology. This technology is used to remove radioactive contamination, PCBs, and lead-based paint and provides worker protection by continuously recycling the material and dust for the decontamination tasks. The proposed work would increase the cleaning rate and provide safe and cost-effective decontamination of the DOE sites. This work focuses on redesigning and improving existing vacuum blasting technology including blast head nozzles, ergonomic handling of the blast head by reducing its weight; brush-ring design, vacuum level regulator, efficiency of the dust separator, and operational control sensors. The redesign is expected to enhance the productivity and economy of the vacuum blasting system by at least 50% over current vacuum blasting systems. There are three phases in the project. Phase I consists of developing and testing mathematical models. Phase II consists of pre-prototype design and fabrication and pre-prototype unit testing. Phase III consists of prototype design and field verification testing. In phase I, mathematical models are developed and analyzed for the nozzle, blast head, wind curtain, and dust separator, first as individual devices and then combined as an integrated model. This allows study of respective airflow and design parameters. The Contractor shall, based on the results of the mathematical modeling studies, design experimental models of the components and test these models. In addition, the Contractor shall develop sensors to detect the relationship of the blast head to the blast surfaces and controls to minimize the dependency on an operator's skill and judgment to obtain optimum positioning, as well as real-time characterization sensors to determine as the blast head is moving the depth to which coatings must be removed, thereby improving production and minimizing waste. In phase II, the Contractor shall design and

Production Flexibility in Extensive Beef Farming Systems

Directory of Open Access Journals (Sweden)

Laura Astigarraga

2011-03-01

Full Text Available The aim of this work is to assess the flexibility of production allowed by extensive production conditions faced with variations in the environment, i.e., market variations and climatic fluctuations, of Limousin beef systems. The study used a case-based methodology in which seven beef farms with less than 1 LU/ha were chosen. Data collection was based on three interviews using a semistructured questionnaire and on the analysis of productive and economic results over a 15-year period (1991-2005. The main evolution of these farms is related to a rise in work productivity associated with an increase in herd size. Herd increase was made possible by enlarging the area, the margin of intensification being limited in these regions. To take advantage of the enlarged land area, females were reared for fattening or for reproduction instead of selling them at weaning. The Limousin female provides a wide product mix because of its plasticity, as has been studied by several researchers. This mix flexibility is achieved by delaying product differentiation, a form of production flexibility that can reduce the risk of under-producing or over-producing varied product configurations. On the other hand, calves sold to the Italian market after weaning are generic products, associated with a flexible production process to overcome fluctuations in forage availability due to climatic variations. The introduction of maize silage for feeding acts as an alternative route, actual and potential, through the system to overcome unexpected forage shortage from natural grasslands as a result of droughts. The study shows that extensive farming systems have developed types of flexibility to match different factors of uncertainty from the environment. Finally, the issue of farm system performance is thus not so much a question of whether a farm is fit at a specific moment in time, but whether it transforms into a less or more sustainable orientation.

Etude comparative de tubes en matériaux composites en vue de l'application à l'exploitation des hydrocarbures en mer profonde Comparative Study of Composite-Material Tubes with a View to Their Use for Deep Offshore Hydrocarbon Production

Directory of Open Access Journals (Sweden)

Bonavent G.

2006-11-01

Full Text Available Les prévisions de développement de la production pétrolière en mer profonde font apparaître de nouveaux besoins en tubes légers et à haute résistance pour les liaisons verticales entre les têtes de puits sous-marines et les plates-formes flottantes, et les conduites immergées par grand fond. Certains matériaux composites peuvent répondre à ces besoins et présentent en outre l'avantage d'une excellente résistance à la corrosion dans l'environnement marin. Toutefois, les choix sont imposés essentiellement par des contraintes d'ordre mécanique. On cherche ici à comparer, par rapport à l'acier, les avantages de deux types de matériaux composites - les composites acier-résine - les composites fibres-résine dont on résume les principales caractéristiques et les domaines d'applications possibles en fonction des spécifications pétrolières Development forecosts for deep offshore petroleum production bring out new needs for light tubes for vertlcaf linksbetween subsea wellheads and floating piatforms as well as for subsea pipelines ut great depths. Some composite materials moy meet such requirements while also hoving the advantoge of high résistance ta corrosion in a marine environment. However, the choices are mainly governed by stresses of a mechanical nature. Compared with steel, this article seeks ta describe the advantages of the following two types of composite materials : (il steel-resin composites, and (ii fiber-resin composites. The leading properties and the possible arecs of application are summed up as a function of petroleum specifications.

Interactive augmented reality system for product design review

Science.gov (United States)

Caruso, Giandomenico; Re, Guido Maria

2010-01-01

The product development process, of industrial products, includes a phase dedicated to the design review that is a crucial phase where various experts cooperate in selecting the optimal product shape. Although computer graphics allows us to create very realistic virtual representations of the products, it is not uncommon that designers decide to build physical mock-ups of their newly conceived products because they need to physically interact with the prototype and also to evaluate the product within a plurality of real contexts. This paper describes the hardware and software development of our Augmented Reality design review system that allows to overcome some issues related to the 3D visualization and to the interaction with the virtual objects. Our system is composed by a Video See Through Head Mounted Display, which allows to improve the 3D visualization by controlling the convergence of the video cameras automatically, and a wireless control system, which allows us to create some metaphors to interact with the virtual objects. During the development of the system, in order to define and tune the algorithms, we have performed some testing sessions. Then, we have performed further tests in order to verify the effectiveness of the system and to collect additional data and comments about usability and ergonomic aspects.

Consumer Intervention Mapping—A Tool for Designing Future Product Strategies within Circular Product Service Systems

Directory of Open Access Journals (Sweden)

Matt Sinclair

2018-06-01

Full Text Available Re-distributed manufacturing presents a number of opportunities and challenges for New Product Development in a future Circular Economy. It has been argued that small-scale, flexible and localised production systems will reduce resource consumption, lower transport emissions and extend product lifetimes. At the same time smart products within the Internet of Things will gather and report data on user behaviour and product status. Many sustainable design tools have previously been developed but few are able to imagine and develop visions of how future sustainable product service systems might be manifested. This paper introduces the concept of Consumer Intervention Mapping as a tool for creating future product strategies. The tool visualises the points within a product’s lifecycle where stakeholders are able to intervene in the product’s expected journey. This perspective enables the rapid construction of scenarios that explore and describe future circular product service systems. Validation of the tool in three workshops is described and the outcomes are presented. Consumer Intervention Mapping is successful in creating scenarios that describe existing product service systems and new product concepts adapted to a Circular Economy paradigm. Further work is required to refine the tool’s performance in more focused and reflective design exercises.

Prevalence of food production systems in school foodservice.

Science.gov (United States)

Brown, Denise M

2005-08-01

What is the prevalence of central kitchens that use either cook-chill or cook-freeze production systems in school foodservice settings? A descriptive study using a 5-minute telephone survey during normal working hours was conducted. Questions were designed to be easily answered with minimal need to reference other documentation. Five hundred forty school foodservice directors, managers, and supervisors working in school districts of all sizes across the United States were randomly sampled from a national commercial directory of school districts for the study. A total of 353 individuals completed the survey representing 49 of 50 states. Means, standard deviations, and percentages were evaluated for all data collected. Descriptive statistics of school district characteristics, prevalence of production systems, food transport systems, inventory methods and equipment used for reheating food are reported. The most frequently reported production system was on-site kitchens (45.3%) followed by combination production systems (40.5%) where a central kitchen delivered to a number of satellite locations in addition to schools with on-site food preparation. Central kitchens without additional on-site kitchens represented 14.2% of this study. Of those school districts using either central kitchens or combination production systems, 78% reported hot-food preparation using hot-food delivery to satellites. Cook-chill or cook-freeze production systems were reported by 22% of respondents. The high proportion of school districts that prepared and delivered foods hot to satellite sites supports continuing efforts to identify food safety practices and issues related to maintaining food quality in schools.

A Land Product Characterization System for Comparative Analysis of Satellite Data and Products

Directory of Open Access Journals (Sweden)

Kevin Gallo

2017-12-01

Full Text Available A Land Product Characterization System (LPCS has been developed to provide land data and products to the community of individuals interested in validating space-based land products by comparing them with similar products available from other sensors or surface-based observations. The LPCS facilitates the application of global multi-satellite and in situ data for characterization and validation of higher-level, satellite-derived, land surface products (e.g., surface reflectance, normalized difference vegetation index, and land surface temperature. The LPCS includes data search, inventory, access, and analysis functions that will permit data to be easily identified, retrieved, co-registered, and compared statistically through a single interface. The system currently includes data and products available from Landsat 4 through 8, Moderate Resolution Imaging Spectroradiometer (MODIS Terra and Aqua, Suomi National Polar-Orbiting Partnership (S-NPP/Joint Polar Satellite System (JPSS Visible Infrared Imaging Radiometer Suite (VIIRS, and simulated data for the Geostationary Operational Environmental Satellite (GOES-16 Advanced Baseline Imager (ABI. In addition to the future inclusion of in situ data, higher-level land products from the European Space Agency (ESA Sentinel-2 and -3 series of satellites, and other high and medium resolution spatial sensors, will be included as available. When fully implemented, any of the sensor data or products included in the LPCS would be available for comparative analysis.

Corrosion products in power generating systems

International Nuclear Information System (INIS)

Lister, D.H.

1980-06-01

The important mechanisms of corrosion and corrosion product movement and fouling in the heat transport systems of thermal electric generating stations are reviewed. Oil- and coal-fired boilers are considered, along with nuclear power systems - both direct and indirect cycle. Thus, the fireside and waterside in conventional plants, and the primary coolant and steam-raising circuits in water-cooled reactors, are discussed. Corrosion products in organic- and liquid-metal-cooled reactors also are shown to cause problems if not controlled, while their beneficial effects on the cooling water side of condensers are described. (auth)

Task Management in the New ATLAS Production System

CERN Document Server

De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

2013-01-01

The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

Task Management in the New ATLAS Production System

CERN Document Server

De, K; The ATLAS collaboration; Klimentov, A; Potekhin, M; Vaniachine, A

2014-01-01

The ATLAS Production System is the top level workflow manager which translates physicists' needs for production level processing into actual workflows executed across about a hundred processing sites used globally by ATLAS. As the production workload increased in volume and complexity in recent years (the ATLAS production tasks count is above one million, with each task containing hundreds or thousands of jobs) there is a need to upgrade the Production System to meet the challenging requirements of the next LHC run while minimizing the operating costs. Providing a front-end and a management layer for petascale data processing and analysis, the new Production System contains generic subsystems that can be used in a wider range of applications. The main subsystems are the Database Engine for Tasks (DEFT) and the Job Execution and Definition Interface (JEDI). Based on users' requests, the DEFT subsystem manages inter-dependent groups of tasks (Meta-Tasks) and generates corresponding data processing workflows. Th...

Group decision support system for customer-driven product design

Science.gov (United States)

Lin, Zhihang; Chen, Hang; Chen, Kuen; Che, Ada

2000-10-01

This paper describes the work on the development of a group decision support system for customer driven product design. The customer driven is to develop products, which meet all customer requirements in whole life cycle of products. A process model of decision during product primary design is proposed to formulate the structured, semi-structured and unstructured decision problems. The framework for the decision support system is presented that integrated both advances in the group decision making and distributed artificial intelligent. The system consists of the product primary design tool kit and the collaborative platform with multi-agent structure. The collaborative platform of the system and the product primary design tool kit, including the VOC (Voice of Customer) tool, QFD (Quality Function Deployment) tool, the Conceptual design tool, Reliability analysis tool and the cost and profit forecasting tool, are indicated.

Crossed product algebras associated with topological dynamical systems

NARCIS (Netherlands)

Svensson, Pär Christian

2009-01-01

We study connections between topological dynamical systems and associated algebras of crossed product type. We derive equivalences between structural properties of a crossed product and dynamical properties of the associated system and furthermore derive qualitative results concerning the crossed

Design and Experimental Validation of a USBL Underwater Acoustic Positioning System

Directory of Open Access Journals (Sweden)

Joel Reis

2016-09-01

Full Text Available This paper presents the steps for developing a low-cost POrtableNavigation Tool for Underwater Scenarios (PONTUS to be used as a localization device for subsea targets. PONTUS consists of an integrated ultra-short baseline acoustic positioning system aided by an inertial navigation system. Built on a practical design, it can be mounted on an underwater robotic vehicle or be operated by a scuba diver. It also features a graphical user interface that provides information on the tracking of the designated target, in addition to some details on the physical properties inside PONTUS. A full disclosure of the architecture of the tool is first presented, followed by thorough technical descriptions of the hardware components ensemble and the software development process. A series of experiments was carried out to validate the developed prototype, and the results are presented herein, which allow assessing its overall performance.

Design and Experimental Validation of a USBL Underwater Acoustic Positioning System.

Science.gov (United States)

Reis, Joel; Morgado, Marco; Batista, Pedro; Oliveira, Paulo; Silvestre, Carlos

2016-09-14

This paper presents the steps for developing a low-cost POrtableNavigation Tool for Underwater Scenarios (PONTUS) to be used as a localization device for subsea targets. PONTUS consists of an integrated ultra-short baseline acoustic positioning system aided by an inertial navigation system. Built on a practical design, it can be mounted on an underwater robotic vehicle or be operated by a scuba diver. It also features a graphical user interface that provides information on the tracking of the designated target, in addition to some details on the physical properties inside PONTUS. A full disclosure of the architecture of the tool is first presented, followed by thorough technical descriptions of the hardware components ensemble and the software development process. A series of experiments was carried out to validate the developed prototype, and the results are presented herein, which allow assessing its overall performance.

Y-method for subsea equipment installation; Metodo Y de instalacao de equipamentos 'subsea'

Energy Technology Data Exchange (ETDEWEB)

Santos, Melquisedec F.; Neves, Cassiano R. [SUBSIN - Subsea Integrity Engenharia e Projetos Ltda., Rio de Janeiro, RJ (Brazil)

2008-07-01

The paper presents a new design of equipment to fall to the seabed, and the results of preliminary calculations to validate the concept. The goals to be achieved consider the current reality of offshore production demands the increasing use of equipment background with large mass and dimensions at increasing depths. The increase of the depths brings necessarily, independent of the mass value, the appearance of a 'zone of resonance' in which pick of tensions arise in values often exceed the capacity of the traction cables designed with all the factors of safety required in standard. This phenomenon necessitates the use of equipment that create the 'spring effect', damping equipment installed in the line of tension involving the use of cranes and ferries or compensating for 'heave' trying to minimize the effects of the balance of the sea in the operation involving where the use of vessels of large size and high cost. By splitting the vector of the load in two, by two different boats, six variables are introduced make it easy to control. The variables are: relative positions and lengths of the cable of witch vessel and the speed of descent of these cables. This development emphasized the cost factor to meet technical and operational characteristics of this type of work, including the same way all the safety requirements and operational speed. As a result of the additional method, we were able to introduce a new parameter in the coupling of equipment in the background since the method also brings the possibility of total control of the speed of approach and touch a tool in its 'slot' even it in a sea adverse. (author)

Energy Production System Management - Renewable energy power supply integration with Building Automation System

International Nuclear Information System (INIS)

Figueiredo, Joao; Martins, Joao

2010-01-01

Intelligent buildings, historically and technologically, refers to the integration of four distinctive systems: Building Automation Systems (BAS), Telecommunication Systems, Office Automation Systems and Computer Building Management Systems. The increasing sophisticated BAS has become the 'heart and soul' of modern intelligent buildings. Integrating energy supply and demand elements - often known as Demand-Side Management (DSM) - has became an important energy efficiency policy concept. Nowadays, European countries have diversified their power supplies, reducing the dependence on OPEC, and developing a broader mix of energy sources maximizing the use of renewable energy domestic sources. In this way it makes sense to include a fifth system into the intelligent building group: Energy Production System Management (EPSM). This paper presents a Building Automation System where the Demand-Side Management is fully integrated with the building's Energy Production System, which incorporates a complete set of renewable energy production and storage systems.

The Next Generation ATLAS Production System

CERN Document Server

Borodin, Mikhail; The ATLAS collaboration; Golubkov, Dmitry; Klimentov, Alexei; Maeno, Tadashi; Mashinistov, Ruslan; Vaniachine, Alexandre

2015-01-01

The ATLAS experiment at LHC data processing and simulation grows continuously, as more data and more use cases emerge. For data processing the ATLAS experiment adopted the data transformation approach, where software applications transform the input data into outputs. In the ATLAS production system, each data transformation is represented by a task, a collection of many jobs, dynamically submitted by the ATLAS workload management system (PanDA/JEDI) and executed on the Grid, clouds and supercomputers. Patterns in ATLAS data transformation workflows composed of many tasks provided a scalable production system framework for template definitions of the many-tasks workflows. User interface and system logic of these workflows are being implemented in the Database Engine for Tasks (DEFT). Such development required using modern computing technologies and approaches. We report technical details of this development: database implementation, server logic and Web user interface technologies.

Islay development flow assurance challenges

Energy Technology Data Exchange (ETDEWEB)

Helingoe, Mark; Greder, Hugues

2010-07-01

The Islay field is located in the Northern North Sea UK sector in the vicinity of the Alwyn Platforms. This gas condensate Brent structure is planned to be developed subsea with first gas in 2011. The main development challenge for this HPHT field comes from the early expected formation water production which is the source of major hydrate related flow assurance issues. As continuous inhibition is not feasible, Total has progressed a development scenario based on seabed conditioning prior to pipe laying so that water can be collected and temporarily inhibited at specific low points after a shut-down. It is also intended to heat trace the pipeline as a back-up solution to avoid hydrate formation. Heat tracing has so far never been implemented in Subsea developments. The Islay pilot could open the path to a new hydrate management philosophy for future developments. (Author)

Production Management System for AMS Computing Centres

Science.gov (United States)

Choutko, V.; Demakov, O.; Egorov, A.; Eline, A.; Shan, B. S.; Shi, R.

2017-10-01

The Alpha Magnetic Spectrometer [1] (AMS) has collected over 95 billion cosmic ray events since it was installed on the International Space Station (ISS) on May 19, 2011. To cope with enormous flux of events, AMS uses 12 computing centers in Europe, Asia and North America, which have different hardware and software configurations. The centers are participating in data reconstruction, Monte-Carlo (MC) simulation [2]/Data and MC production/as well as in physics analysis. Data production management system has been developed to facilitate data and MC production tasks in AMS computing centers, including job acquiring, submitting, monitoring, transferring, and accounting. It was designed to be modularized, light-weighted, and easy-to-be-deployed. The system is based on Deterministic Finite Automaton [3] model, and implemented by script languages, Python and Perl, and the built-in sqlite3 database on Linux operating systems. Different batch management systems, file system storage, and transferring protocols are supported. The details of the integration with Open Science Grid are presented as well.

Structural Materials for Efficient Energy Production Systems

International Nuclear Information System (INIS)

Gomez Briceno, D.

2009-01-01

Increasing the efficiency of electric power production systems implies increasing the operating temperature above those of systems currently in operation. The viability of new systems depends completely on the availability of structural materials that withstand the operating conditions specified in the design: adequate features under mechanical stress at high temperatures and compatibility with the medium. In the case of nuclear systems (fission, fusion), an important requirement is their response to irradiation induced damage. In spite of the significant differences that exist in the design of nuclear power plants, fusion reactors, innovative fission systems, supercritical fossil plants, biomass plants, solar concentration thermal plants, etc., all of them have as a common characteristic the use of resistant materials at high temperatures. The qualification of existing materials for the new and more demanding operating conditions and the development of new materials is one of the challenges faced by the electric power production industry. The science of materials and the understanding of the basic processes that take place in structural materials on exposure to the operating conditions of energy production systems are the tools that are available to obtain safe and economically viable solutions. (Authors) 4 refs.

Development of redesign method of production system based on QFD

Science.gov (United States)

Kondoh, Shinsuke; Umeda, Yasusi; Togawa, Hisashi

In order to catch up with rapidly changing market environment, rapid and flexible redesign of production system is quite important. For effective and rapid redesign of production system, a redesign support system is eagerly needed. To this end, this paper proposes a redesign method of production system based on Quality Function Deployment (QFD). This method represents a designer's intention in the form of QFD, collects experts' knowledge as “Production Method (PM) modules,” and formulates redesign guidelines as seven redesign operations so as to support a designer to find out improvement ideas in a systematical manner. This paper also illustrates a redesign support tool of a production system we have developed based on this method, and demonstrates its feasibility with a practical example of a production system of a contact probe. A result from this example shows that comparable cost reduction to those of veteran designers can be achieved by a novice designer. From this result, we conclude our redesign method is effective and feasible for supporting redesign of a production system.

Research and development of HTTR hydrogen production systems

International Nuclear Information System (INIS)

Shiozawa, Shusaku; Ogawa, Masuro; Inagaki, Yoshiyuki; Onuki, Kaoru; Takeda, Tetsuaki; Nishihara, Tetsuo; Hayashi, Koji; Kubo, Shinji; Inaba, Yoshitomo; Ohashi, Hirofumi

2002-01-01

The Japan Atomic Energy Research Institute (JAERI) has constructed the High Temperature Engineering Test Reactor (HTTR) with a thermal output of 30MW and a reactor out let coolant temper at ure of 950 .deg. C. There search and development (R and D) program on nuclear production of hydrogen was started on January in 1997 as a study consigned by Ministry of Education, Culture, Sports, Science and Technology. A hydrogen production system connected to the HTTR is being designed to be able to produce hydrogen of about 4000m 3 /h by steam reforming of natural gas, using a nuclear heat of 10MW supplied by the HTTR hydrogen production system. In order to confirm controllability, safety and performance of key components in the HTTR hydrogen production system, the facility for the out-of-pile test was constructed on the scale of approximately 1/30 of the HTTR hydrogen production system. In parallel to the out-of-pile test, the following tests as essential problem, a corrosion test of a reforming tube, a permeation test of hydrogen isotopes through heat exchanger and reforming tubes, and an integrity test of a high-temperature isolation valve are carried out to obtain detailed data for safety review and development of analytical codes. Other basis studies on the hydrogen production technology of thermochemical water splitting called an iodine sulfur (IS) process, has been carried out for more effective and various uses of nuclear heat. This paper describes the present status and a future plan on the R and D of the HTTR hydrogen production systems in JAERI

Modernizing the Regulatory System for Biotechnology Products

Science.gov (United States)

This Web page describes the continuing effort to modernize the federal regulatory system for biotechnology products as well as clarify various roles of EPA, FDA and USDA in evaluating new biotechnology products.

Testing improvements in the chocolate traceability system: Impact on product recalls and production efficiency

DEFF Research Database (Denmark)

Saltini, Rolando; Akkerman, Renzo

2012-01-01

hypothetical improvements of the traceability system within the chocolate production system and supply chain and we illustrate the resulting benefits by using a case study. Based on the case study, we quantify the influence of these improvements on production efficiency and recall size in case of a safety......The primary aim of food traceability is to increase food safety, but traceability systems can also bring other benefits to production systems and supply chains. In the literature these benefits are extensively discussed, but studies that quantify them are scarce. In this paper we propose two...... crisis by developing a simulation tool. These results are aimed to illustrate and quantify the additional benefits of traceability information, and could help food industries in deciding whether and how to improve their traceability systems....

FY 1997 survey report on information sharing product life-cycle systems. 2; 1997 nendo joho kyoyugata product life cycle system ni kansuru chosa hokokusho. 2

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-03-01

Highly value-added products considering a total life-cycle of products by integrating both production and consumption activities are much in demand, and each information corresponding to each product should be realized by concept integrating both information and product as common element. Survey was made on what a social system integrating production and consumption should be, a product information model, and technology integrating both information and product for raw material, industrial machine and household appliance as examples. An information model shared by the whole production and consumption activities was first prepared. Based on this model, data storage, update, retrieval and dispatch technologies were surveyed and developed for life-cycle systems. Degradation and life sensing technology was surveyed for maintenance, repair and disposal activities using proper unstable information of each product. A support system for use of shared information was developed to promote a new highly value-added function. Total evaluation was made on information sharing product life-cycle systems. 10 refs., 23 figs., 7 tabs.

Towards a universal scaling for broadband turbulent noise in internal flow devices

NARCIS (Netherlands)

Jong, A.T. de; Golliard, J.

2013-01-01

An investigation is performed on the scalability of broadband noise sources from separated flows in internal pipe systems. Broadband sources from for example wellhead chokes, bends and valves can potentially excite subsea manifolds through fluid acoustic coupling and fluid structural coupling. The

Developing and promoting OKP production system: a JIT production planning approach

Science.gov (United States)

Samavati, Mehran

2011-10-01

The role of production in competitive system of market on one hand and the changing conditions of market on the other hand has caused the need for more developed planning in such environments. The general purpose of the present research is to realize One-of- a- Kind- Product model (OKP) that is developed in two stages. In OKP model presented in 1994 only one sample of each product is produced and only one production method is considered for each product. In order to make OKP model more real and to use it in promoting more production methods, the following developments were made in this research: 1-First Development: Considering various methods for producing each product. 2-Second Development: Producing more than one sample of each product, while considering various production methods for each product. These models promoted OKP model of 1994. They can be used in more diversified production methods in order to promote them. In present model, while describing the main OKP model new models are provided as well. The significance of OKP has been described in Introduction

Radical production in biological systems

International Nuclear Information System (INIS)

Johnson, J.R.; Akabani, G.

1994-10-01

This paper describes our effort to develop a metric for radiation exposure that is more fundamental than adsorbed dose and upon which a metric for exposure to chemicals could be based. This metric is based on the production of radicals by the two agents. Radicals produced by radiation in biological systems commonly assumed to be the same as those produced in water despite the presence of a variety of complex molecules. This may explain why the extensive efforts to describe the relationship between energy deposition (track structure) and molecular damage to DNA, based on the spectrum of radicals produced, have not been successful in explaining simple biological effects such as cell killing. Current models assume that DNA and its basic elements are immersed in water-like media and only model the production and diffusion of water-based radicals and their interaction with DNA structures; these models lack the cross sections associated with each macro-component of DNA and only treat water-based radicals. It has been found that such models are not realistic because DNA is not immersed in pure water. A computer code capable of simulating electron tracks, low-energy electrons, energy deposition in small molecules, and radical production and diffusion in water like media has been developed. This code is still in at a primitive stage and development is continuing. It is being used to study radical production by radiation, and radical diffusion and interactions in simple molecular systems following their production. We are extending the code to radical production by chemicals to complement our PBPK modeling efforts. It therefore has been developed primarily for use with radionuclides that are in biological materials, and not for radiation fields

Conceptual design of the HTTR-IS hydrogen production system

International Nuclear Information System (INIS)

Sakaba, Nariaki; Sato, Hiroyuki; Hara, Teruo; Kato, Ryoma; Ohashi, Kazutaka; Nishihara, Tetsuo; Kunitomi, Kazuhiko

2007-08-01

Since hydrogen produced by nuclear should be economically competitive compared with other methods in a hydrogen society, it is important to build hydrogen production system to be coupled with the reactor as a conventional chemical plant. Japan Atomic Energy Agency started the safety study to establish a new safety philosophy to meet safety requirements for non-nuclear grade hydrogen production system. Also, structural concepts with integrating functions for the Bunsen reactor and sulphuric acid decomposer were proposed to reduce construction cost of the IS process hydrogen production system. In addition, HI decomposer which enables the process condition to be eased consisting of conventional materials and technologies was studied. Moreover, technical feasibility of the HTTR-IS system in which the hydrogen production rate of 1,000 Nm 3 /h by using the supplied heat of 10 MW from the intermediate heat exchanger of the HTTR was confirmed. This paper describes the conceptual design of the HTTR-IS hydrogen production system. (author)

System-theoretic analysis of due-time performance in production systems

OpenAIRE

Jacobs David; Meerkov Semyon M.

1995-01-01

Along with the average production rate, the due-time performance is an important characteristic of manufacturing systems. Unlike the production rate, the due-time performance has received relatively little attention in the literature, especially in the context of large volume production. This paper is devoted to this topic. Specifically, the notion of due-time performance is formalized as the probability that the number of parts produced during the shipping period reaches the required shipme...

Acoustics advances study of sea floor hydrothermal flow

Science.gov (United States)

Rona, Peter A.; Jackson, Darrell R.; Bemis, Karen G.; Jones, Christopher D.; Mitsuzawa, Kyohiko; Palmer, David R.; Silver, Deborah

Sub-sea floor hydrothermal convection systems discharge as plumes from point sources and as seepage from the ocean bottom. The plumes originate as clear, 150-400°C solutions that vent from mineralized chimneys; precipitate dissolved metals as particles to form black or white smokers as they turbulently mix with ambient seawater; and buoyantly rise hundreds of meters to a level of neutral density where they spread laterally. The seepage discharges from networks of fractures at the rock-water interface as clear, diffuse flow, with lower temperatures, metal contents, and buoyancy than the smokers. The diffuse flow may be entrained upward into plumes, or laterally by prevailing currents in discrete layers within tens of meters of the sea floor. The role of these flow regimes in dispersing heat, chemicals, and biological material into the ocean from sub-sea floor hydrothermal convection systems is being studied on a global scale.

Product prioritization in a two-stage food production system with intermediate storage

DEFF Research Database (Denmark)

Akkerman, Renzo; van Donk, Dirk Pieter

2007-01-01

In the food-processing industry, usually a limited number of storage tanks for intermediate storage is available, which are used for different products. The market sometimes requires extremely short lead times for some products, leading to prioritization of these products, partly through...... the performance improvements for the prioritized product, as well as the negative effects for the other products. We also show how the effect decreases with more storage tanks, and increases with more products....... the dedication of a storage tank. This type of situation has hardly been investigated, although planners struggle with it in practice. This paper aims at investigating the fundamental effect of prioritization and dedicated storage in a two-stage production system, for various product mixes. We show...

What Happens to Integrated Product Development Models with Product/Service-System Approaches?

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles; Andreasen, Mogens Myrup

2006-01-01

Integrated Product Development (IPD) has traditionally focused on the development activities relating to physical technological artefacts. With the advent of business approaches for manufacturing firms based on providing customers the utility of integrated products and services – a term dubbed...... ‘product/service-systems (PSS)’ – companies need to extend their activities to include new dimensions of development. Within the paradigm of mass production and consumption, traditional product-oriented business strategies regarded physical technological artefacts (products) as the mediators of customer...... value. Value was based on the exchange of products between a providing company and a receiving customer. The more products the company could sell, the more revenue it generated. At the point of sale the ownership and responsibility of the product was transferred from company to customer. A customer...

Annual forage cropping-systems for midwestern ruminant livestock production

OpenAIRE

McMillan, John Ernest

2016-01-01

Annual forage cropping systems are a vital aspect of livestock forage production. One area where this production system can be enhanced is the integration of novel annual forages into conventional cropping systems. Two separate projects were conducted to investigate alternative forage options in annual forage production. In the first discussed research trial, two sets of crops were sown following soft red winter wheat (Triticum aestivum L.) grain harvest, at two nitrogen application rates 56 ...

Development of Souvenir Production Transaction Processing System

Science.gov (United States)

Rumambi, H.; Kaparang, R.; Lintong, J.

2018-01-01

This research aims to design a souvenir production transaction processing system for the craftsmen in North Sulawesi. The craftsmen make very simple recordings about souvenir production transactions and use documents that are not in accordance with the generally accepted accounting practices. This research uses qualitative method. The data is collected through interviews, observations, documents and literatures studies. The research stages are conducted in preliminary studies, data collection, data analyzed and system design. The design of system is built from chart of account, accounting cycle and documents as input and get processed in accounting recording. The outputs are financial statements. The system design provides benefits for the craftsmen in assessing the financial performance and getting financing from bank.

Fully automatic CNC machining production system

Directory of Open Access Journals (Sweden)

Lee Jeng-Dao

2017-01-01

Full Text Available Customized manufacturing is increasing years by years. The consumption habits change has been cause the shorter of product life cycle. Therefore, many countries view industry 4.0 as a target to achieve more efficient and more flexible automated production. To develop an automatic loading and unloading CNC machining system via vision inspection is the first step in industrial upgrading. CNC controller is adopted as the main controller to command to the robot, conveyor, and other equipment in this study. Moreover, machine vision systems are used to detect position of material on the conveyor and the edge of the machining material. In addition, Open CNC and SCADA software will be utilized to make real-time monitor, remote system of control, alarm email notification, and parameters collection. Furthermore, RFID has been added to employee classification and management. The machine handshaking has been successfully proposed to achieve automatic vision detect, edge tracing measurement, machining and system parameters collection for data analysis to accomplish industrial automation system integration with real-time monitor.

KMS states on Nica-Toeplitz algebras of product systems

DEFF Research Database (Denmark)

Hong, Jeong Hee; Larsen, Nadia S.; Szymanski, Wojciech

2012-01-01

We investigate KMS states of Fowler's Nica-Toeplitz algebra NT(X) associated to a compactly aligned product system X over a semigroup P of Hilbert bimodules. This analysis relies on restrictions of these states to the core algebra which satisfy appropriate scaling conditions. The concept of product...... system of finite type is introduced. If (G, P) is a lattice ordered group and X is a product system of finite type over P satisfying certain coherence properties, we construct KMS_beta states of NT(X) associated to a scalar dynamics from traces on the coefficient algebra of the product system. Our...... results were motivated by, and generalize some of the results of Laca and Raeburn obtained for the Toeplitz algebra of the affine semigroup over the natural numbers....

Systems Biology of Microbial Exopolysaccharides Production.

Science.gov (United States)

Ates, Ozlem

2015-01-01

Exopolysaccharides (EPSs) produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture, and medicine. EPSs are mainly associated with high-value applications, and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However, only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover, a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore, a systems-based approach constitutes an important step toward understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism, and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan, and dextran.

Systems biology of microbial exopolysaccharides production

Directory of Open Access Journals (Sweden)

Ozlem eAtes

2015-12-01

Full Text Available Exopolysaccharides (EPS produced by diverse group of microbial systems are rapidly emerging as new and industrially important biomaterials. Due to their unique and complex chemical structures and many interesting physicochemical and rheological properties with novel functionality, the microbial EPSs find wide range of commercial applications in various fields of the economy such as food, feed, packaging, chemical, textile, cosmetics and pharmaceutical industry, agriculture and medicine. EPSs are mainly associated with high-value applications and they have received considerable research attention over recent decades with their biocompatibility, biodegradability, and both environmental and human compatibility. However only a few microbial EPSs have achieved to be used commercially due to their high production costs. The emerging need to overcome economic hurdles and the increasing significance of microbial EPSs in industrial and medical biotechnology call for the elucidation of the interrelations between metabolic pathways and EPS biosynthesis mechanism in order to control and hence enhance its microbial productivity. Moreover a better understanding of biosynthesis mechanism is a significant issue for improvement of product quality and properties and also for the design of novel strains. Therefore a systems-based approach constitutes an important step towards understanding the interplay between metabolism and EPS biosynthesis and further enhances its metabolic performance for industrial application. In this review, primarily the microbial EPSs, their biosynthesis mechanism and important factors for their production will be discussed. After this brief introduction, recent literature on the application of omics technologies and systems biology tools for the improvement of production yields will be critically evaluated. Special focus will be given to EPSs with high market value such as xanthan, levan, pullulan and dextran.

Product configuration of infra structure systems for data centres

DEFF Research Database (Denmark)

Hvam, Lars; Christensen, Tim Teglgaard; Jensen, Søren Brogaard

2007-01-01

centres, and components and systems for these systems. At the heart of its mass customisation strategy are a module-based product range and the use of product configuration systems for sales and order processing. In addition, the company has implemented a manufacturing concept, which involves the mass...

Remote erosion and corrosion monitoring of subsea pipelines using acoustic telemetry and wet-mate connector technology

Energy Technology Data Exchange (ETDEWEB)

Painter, Howard; Barlow, Stewart [Teledyne ODI, Thousand Oaks, CA (United States); Clarke, Daniel [Teledyne Cormon, Thousand Oaks, CA (United States); Green, Dale [Teledyne Benthos, North Falmouth, MA (United States)

2009-07-01

This paper will present a novel approach for monitoring erosion and corrosion using proven sub sea technologies: intrusive erosion and corrosion monitoring, acoustic telemetry and wet-mateable connector technology. Intrusive metal loss based monitoring systems on sub sea pipelines are increasingly being used because of their ability to directly measure erosion and corrosion. These systems are integrated with the sub sea production control system or located close to the platform and hard-wired. However, locations remote from a sub sea control system or platform requires a dedicated communication system and long lengths of cable that can be cost prohibitive to procure and install. The system presented consists of an intrusive erosion or corrosion monitor with pressure and temperature transmitters, a retrievable electronics module with an acoustic modem, a data storage module, and a replaceable power module. Time-stamped erosion and corrosion data can be transmitted via an acoustic link to a surface platform, a vessel of opportunity or to a relaying modem. Acoustic signals can be transmitted up to 6 km from the monitoring location. The power module along with data module and acoustic modem are mounted on the erosion and corrosion module using wet-mateable connectors, allowing retrieval by remotely operated vehicles. The collected data can be used to assess the cumulative erosion and corrosion as well as use the real-time metal loss rate data to correlate with operational parameters. Benefits include optimization of corrosion inhibitor dosage rates, mitigation of damage caused by solids production, and increased flow assurance. (author)

Multiple products management system with sensors array in automated storage and retrieval systems

Science.gov (United States)

Vongbunyong, Supachai; Roengritronnachai, Perawat; Kongsanit, Savanut; Chanok-owat, Chawisa; Polchankajorn, Pongsakorn

2018-01-01

Automated Storage and Retrieval Systems (AS/RS) have now been widely used in a number of industries due to its capability to automatically manage the storage of products in effective ways. One of the key features of AS/RS is that each rack is not assigned for a specific product resulting in the benefit of space utilization and logistics related issues. In this research, sensor arrays are equipped at each rack in order to enhance this feature. As a result, various products can be identified and mixed in each rack, so that the space utilization efficiency can be increased. To prove the concept, a prototype system consisting of a Cartesian robot that manages the storage and retrieval of products with 9 variations based on size and color. The concept of Cyber-Physical System and self-awareness of the system are also implemented in this concept prototype.

14 CFR 21.125 - Production inspection system: Materials Review Board.

Science.gov (United States)

2010-01-01

... § 21.125 Production inspection system: Materials Review Board. Link to an amendment published at 74 FR... Materials Review Board action for at least two years. (b) The production inspection system required in § 21... 14 Aeronautics and Space 1 2010-01-01 2010-01-01 false Production inspection system: Materials...

Attitudes of Brazilian citizens towards pig production systems

DEFF Research Database (Denmark)

de Barcellos, Marcia Dutra; Kügler, Jens Oliver; Saab, Maria Stella Melo

to identify Brazilian citizen clusters. Respondents' socio-demographic profile, attitudes towards issues that are expected to influence the way how people evaluate pig meat production systems, and consumption frequency of various pork products were used as background information for profiling. Three clusters...... and consumption behaviour was found to be weak. As it was suggested for Europe (Krystallis et al., 2009), what people think in their role as citizens related to pig production does not appear to significantly influence their pork consumption choices.......The objective of this study is to map Brazilian citizen attitudes towards pig meat production systems and to investigate whether these attitudes associate with pork and pork product consumption. A conjoint experiment was carried out with empirical data collected from 475 respondents interviewed...

Conceptualizing the use of system products and system deliveries in the building industry

DEFF Research Database (Denmark)

Hvam, Lars; Mortensen, Niels Henrik; Thuesen, Christian

2013-01-01

on the product architecture and partly of the setup of the business processes by using e.g. Configure to Order processes and Engineer to Order processes. Furthermore the potential impacts from using system products and system deliveries are discussed based on the examples included....

Business cases for product configuration systems

DEFF Research Database (Denmark)

Shafiee, Sara; Kristjansdottir, Katrin; Hvam, Lars

In the recent years, product configuration systems (PCSs) have received greater attention from industries providing customized products as a response to increased demand to fulfil diverse customers’ needs for customized products. Before developing a PCS, a well-established business case has...... to be made in order to secure the success and delivery of the project as it will increase the commitment from the business side. This paper presents a framework for supporting the development of business cases for PCSs and discusses the experiences from multiple case studies benefiting from the suggested...

FY 1998 annual summary report on shared product life-cycle total information system. 3; 1998 nendo joho kyoyugata product lifecycle system ni kansuru chosa hokokusho. 3

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-03-01

Recycling resources is gaining importance increasingly to correspond to global environmental problems. In urban areas, in particular, it is important to efficiently recover and recycle used large-size consumer products, e.g., home electric appliances and automobiles, which are discharged in large quantities. This study proposes a shared product life-cycle total information system, based on recognition that material recycling systems, encompassing stock materials, product production, consumption, and disposal and recycling of wastes, are essential. This system corresponds a material to information, in an attempt to realize more efficient recycling of products. The study for this fiscal year was focused on use of information modules attached to products and their members, product recycling systems using these modules, necessity for and problems involved in thermal recycle systems, problems involved in recycling home electric appliances and extraction of the data for their recycling, and material recycling process systems for home electric appliances and automobiles. (NEDO)

Customized products and cloud service information system development research

Directory of Open Access Journals (Sweden)

Hung Chien-Wen

2017-01-01

Full Text Available This study presents a cloud service customized product information system to enable businesses to provide customized product marketing on the Internet to meet consumer demand for customized products. The cloud service of the information system development strategic framework proposed in this study contains three elements: (1 e-commerce services, (2 promotion type modules, and (3 cloud services customized promotional products. In this study, a mining cloud information system to detect customer behavior is proposed. The association rules from relational database design are utilized to mine consumer behavior to generate cross-selling proposals for customer products and marketing for a retailing mall in Taiwan. The study is composed of several parts, as follows. A market segment and application of association rules in data exploration techniques (Association Rule Mining and sequence-like exploration (Sequential Pattern Mining, efficient analysis of customers, consumer behavior, identification of candidates for promotional products, and using cloud service delivery and evaluation of targets to evaluate candidates for promotional products for production. However, in addition to cloud service customized promotional products, the quantity of promotional products sales varies for different customers. We strive to achieve increased customer loyalty and profits through the use of active cloud service customized promotional products.

The Reconfiguration of Service Production Systems in Response to Offshoring

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

2017-01-01

Purpose: A service production system has a structure composed of task execution, agents performing tasks and a resulting service output. The purpose of this paper is to understand how such a service production system changes as a consequence of offshoring.Design/methodology/approach: Drawing...... of a service production system in response to change ignited by offshoring. The authors find recurring effects between structures that enable and constrain agents and agents who shape the structure of the production system. Research limitations/implications: The paper offers a novel contribution to the service...... operations management literature by applying practice theory. Moreover, the authors propose a detailed, activity-driven view of service production systems and service offshoring. The authors contribute to practice theory by extending its domain to operations management.Practical implications...

Evolution of tsunami warning systems and products.

Science.gov (United States)

Bernard, Eddie; Titov, Vasily

2015-10-28

Each year, about 60 000 people and $4 billion (US$) in assets are exposed to the global tsunami hazard. Accurate and reliable tsunami warning systems have been shown to provide a significant defence for this flooding hazard. However, the evolution of warning systems has been influenced by two processes: deadly tsunamis and available technology. In this paper, we explore the evolution of science and technology used in tsunami warning systems, the evolution of their products using warning technologies, and offer suggestions for a new generation of warning products, aimed at the flooding nature of the hazard, to reduce future tsunami impacts on society. We conclude that coastal communities would be well served by receiving three standardized, accurate, real-time tsunami warning products, namely (i) tsunami energy estimate, (ii) flooding maps and (iii) tsunami-induced harbour current maps to minimize the impact of tsunamis. Such information would arm communities with vital flooding guidance for evacuations and port operations. The advantage of global standardized flooding products delivered in a common format is efficiency and accuracy, which leads to effectiveness in promoting tsunami resilience at the community level. © 2015 The Authors.

Evolution of tsunami warning systems and products

Science.gov (United States)

Bernard, Eddie; Titov, Vasily

2015-01-01

Each year, about 60 000 people and $4 billion (US$) in assets are exposed to the global tsunami hazard. Accurate and reliable tsunami warning systems have been shown to provide a significant defence for this flooding hazard. However, the evolution of warning systems has been influenced by two processes: deadly tsunamis and available technology. In this paper, we explore the evolution of science and technology used in tsunami warning systems, the evolution of their products using warning technologies, and offer suggestions for a new generation of warning products, aimed at the flooding nature of the hazard, to reduce future tsunami impacts on society. We conclude that coastal communities would be well served by receiving three standardized, accurate, real-time tsunami warning products, namely (i) tsunami energy estimate, (ii) flooding maps and (iii) tsunami-induced harbour current maps to minimize the impact of tsunamis. Such information would arm communities with vital flooding guidance for evacuations and port operations. The advantage of global standardized flooding products delivered in a common format is efficiency and accuracy, which leads to effectiveness in promoting tsunami resilience at the community level. PMID:26392620

MERIP - Design of Production Systems with focus on Human Ressources

DEFF Research Database (Denmark)

Jacobsen, Peter; Knudsen, Mads Kristian Lund

1998-01-01

", "Employee-activated Production Development - MAPU", "Integrated Production Systems - IPS" and "Strategic Development of Staff - SUM". MERIP (Human resources in production) is a continuation of this type of projects, aiming at increasing the competitive power of the companies. However MERIP scientists want...... to involve the human resources in the production in new ways. Therefore the objective of the project is to develop methods for design of production systems, that use every possibility in human resources supported by the technology aiming at increasing the competitive power of the companies. The task force......The way in which the Industry has involved the human resources in production systems, has changed in last decades. Previously the human resources were mainly considered as means to link together the technical systems, while today they are key resources responsible for development, planning...

Modular Product Families and Assembly Systems

DEFF Research Database (Denmark)

Thyssen, Jesper

2005-01-01

This research centres on assembly systems designed for utilizing product modularization. Altogether, the task for companies has become an issue of managing the overall trade-off between the external market’s desire for variety and the internal efficiency and effectiveness. Product modularization...... a number of theoretical and managerial implications are identified. From a management point of view, the most im-portant finding is that modularization needs to be configured for the two competitive situations, i.e. 1) the volume flexible configuration focusing on generational product variety and 2......) the mix flexible con-figuration focusing on the simultaneous product variety. These two views are in particular different in respect to the understanding of product modularization. All in all, modularization needs to be, and can be, configured in regard to the specific task, which is believed constituting...

Field development. Concept selection in deep water environment offshore Angola

Energy Technology Data Exchange (ETDEWEB)

Guenot, A.; Berger, J.C.; Limet, N. [TotalFinaElf, la Defense 6, Rosa-Lirio Project Group, 92 - Courbevoie (France)

2002-10-01

The significant oil discoveries made at the end of the 90's in the deep water environment offshore the coast of Angola, has led to a considerable amount of development activities. The first field in production was the turnkey development of the Kuito field on the Block 14 operated by Chevron. More recently the Girassol field has been put successfully in production on the Block 17, operated by TotalFinaElf. Both developments are making use of sub-sea wells connected to a moored dedicated FPSO. On the western side of the Girassol field, several discoveries have been made. They are known as the Rosa Lirio pole, from the names of two of the main channels. Values for water depth are in the same range than on Girassol (1300- 1400 m). A project group has been established in 1999 to evaluate the development of these discoveries. The purpose of this paper is to present the conceptual work which as been carried out, and in particular to show that even if many different concepts have been evaluated, the final choice has been also to make use of sub-sea trees. (authors)

Risk-Optimized Design of Production Systems by Use of GRAMOSA

Directory of Open Access Journals (Sweden)

Michael Lütjen

2014-01-01

Full Text Available Today production and logistic systems are getting more complex. This is a problem which the planning and design of such systems have to deal with. One main issue of production system development in series production is the planning of production processes and systems under uncertainty. New and existing production technologies are often not fully adoptable to new products. This is why some of the main characteristics, like, for example, cost, time, or quality, are not definable at the beginning. Only value ranges and probabilities can be estimated. However, the adaptation process is controllable, which means that the adaptation results are depending on the existing development budget and its resources. This paper presents an approach for the optimized allocation of development resources regarding the adaptation risks of production technologies and processes. The modeling concept GRAMOSA is used for integrated modeling and discrete event-based simulation of the aspired production system. To this end a domain-specific modeling language (DSML is applied. The further risk-based analysis of the simulation results and the optimized allocation of the development budget are done by use of mathematical optimization.

Corrosion-product inventory: the Bruce-B secondary system

International Nuclear Information System (INIS)

Sawicki, J.A.; Price, J.; Brett, M.E.

1995-01-01

Corrosion inspection and corrosion-product characterization in water and steam systems are important for component and systems maintenance in nuclear power stations. Corrosion products are produced, released and redeposited at various sites in the secondary system. Depending on the alloys used in the condenser and feedwater heaters, particulate iron oxides and hydroxides can account for about 95-99% of the total corrosion-product transport. Where brass or cupro-nickel alloys are present, copper and zinc contribute significantly to the total transport and deposition. Particulates are transported by the feedwater to the steam generators, where they accumulate and can cause a variety of problems, such as loss of heat transfer capability through deposition on boiler tubes, blockage of flow through boiler-tube support plates and accelerated corrosion in crevices, either in deep sludge piles or at blocked tube supports. The influx of oxidized corrosion products may have a particularly adverse effect on the redox environment of steam generator tubing, thereby increasing the probability of localized corrosion and other degradation mechanisms. In this paper, there is a description of a survey of general corrosion deposits in Bruce-B, Units 5-8, which helps to identify the origin, evolution and inventory of corrosion products along the secondary system of Candu reactors

Implementation of HACCP system in production of UHT milk

Directory of Open Access Journals (Sweden)

Irena Jeličić

2009-06-01

Full Text Available Regulation of the Croatian Food Law (NN 46/07 which demands implementation of food safety management system based on HACCP principles became mandatory at the January 01st 2009. According to that regulation all subjects in food production and retail sector including the dairy industry too are obligant to implement HACCP system in their production processes. In the process of HACCP implementation many problems occur which result in delaying the implementation, scarce performance of assigned monitoring actions and inadequate maintenance and improvement of the system. All of the latter mentioned problems disable proactive functioning and may lead to disturbance of food safety of the end product. The aim of this paper is to demonstrate the interpretation of each steps that have to be taken in the process of implementation of HACCP system in the production of UHT milk. Thereby many practical informations and examples have been gathered while reviewing the HACCP system in KIM d.d. Dairy industry, Karlovac, Croatia. This paper contains the examples of all indentified hazards, all assigned control actions, hazard analysis and critical control point determination for the process of UHT milk production in KIM d.d. Dairy industry, Karlovac. Furthermore, also examples and ideas for the traceability, verification and validation, product recall and withdrawal procedures are given.

On-line component ratio measurement of oil/gas/water mixtures using an admittance sensor

Energy Technology Data Exchange (ETDEWEB)

Andersen, J A

1984-01-01

The operator of a production platform is primarily interested in which types of fluids a well is producing and how quickly these different components are being produced. The component ratio and production rate of a well vary during the life of a field. To optimize production, measurement of each well's output is thus desirable. Current designs for subsea production systems lack means of continuously measuring three-component flows. A new method of component ratio measurement is described. The fraction of oil, gas and water flowing between two insulated electrode plates is determined by measuring both the electrical conductance and suseptance across the sensor. A preliminary evaluation of the new measurement system has been performed using a process oil/ water/air mixture. The method is not limited to small pipe diameters. The only possible limitation is that for low velocities in very large pipe diameters an in-line mixer may be required. Advantages of this new system are that real-time measurement of void fraction and water content is possible if a non-intrusive rugged sensor is used, and there are no range limitations, as each component may be measured for any given concentration. 4 references.

Impact of product configuration systems on product profitability and costing accuracy

DEFF Research Database (Denmark)

Myrodia, Anna; Kristjansdottir, Katrin; Hvam, Lars

2017-01-01

in control of their product assortment, making the right decisions in the sales phase and increasing sales of optimal products. These benefits should have an impact on the company's ability to make more accurate cost estimations in the sales phase, which can positively affect the products’ profitability......This article aims at analyzing the impact of implementing a product configuration system (PCS) on the increased accuracy of the cost calculations and the increased profitability of the products. Companies that have implemented PCSs have achieved substantial benefits in terms of being more...... and after a PCS was implemented. The comparison in the case study revealed that increased accuracy of the cost calculations in the sales phase and consequently increased profitability can be achieved by implementing a PCS....

Platform strategy for complex products and systems

NARCIS (Netherlands)

Alblas, A.A.

2011-01-01

The thesis of Alex Alblas presents a design reuse strategy for firms producing complex products and systems (CoPS). Examples of CoPS include industrial machinery, oil-rigs, electrical power distribution systems, integrated mail processing systems and printing press machinery. CoPS firms are

From LCA to PSS – Making leaps towards sustainability by applying product/service-system thinking in product development

DEFF Research Database (Denmark)

Bey, Niki; McAloone, Timothy Charles

2006-01-01

for optimisations on all system levels. However, as the act of ecodesign conventionally focuses on physical products, the search for potential optimisations is usually directed ‘downwards’, i.e. towards lower system levels, resulting in optimised components within products rather than optimised products within...... their surrounding systems. This paper will exemplify that when broadening the ecodesign horizon to environmental product/service-system (PSS) design, there is a better possibility of applying a system-oriented life cycle thinking approach, and therefore a potential to yield extreme improvements towards...

Product System Design – to Household Massage Design as An Example

Directory of Open Access Journals (Sweden)

Wang Huabin

2016-01-01

Full Text Available Explain what is the system design and the applications of System design in the product design process. Using The whole idea and systems design methods to analyze the design of household hand massage，Use a chart image to explain that Household hand massage products in the influence of user and the environment, the influence of large system environment for the product. The use of components of the system to anatomy product design. Each system components has a link between and mutual correlation.

Attitudes of European citizens towards pig production systems

DEFF Research Database (Denmark)

Krystallis, Athanasios; de Barcellos, Marcia Dutra; Kügler, Jens Oliver

2009-01-01

The objective of the study is to map citizen attitudes towards pigmeat production systems, and to investigate whether these attitudes associate with pork and pork product consumption. A conjoint experimentwas carried out with empirical data collected from 1931 individuals in four European countries...... pork with specific fat content, and finally the preferred quality characteristics of the pork end-product. The results of the conjoint analysis were used for a subsequent cluster analysis in order to identify European citizen clusters. Respondents' socio-demographic profile, attitudes towards issues...... that are expected to influence the way people evaluate pig meat production systems, and consumption frequency of various pork products are used as background information to identify segment profiles. Pork appears to play a substantial role as a part of the diet for most respondents in the four countries...

Improving Labor Productivity and Labor Elasticity at Multiproduct Japanese Cuisine Restaurant Introducing Cell-Production System

OpenAIRE

Shimamura , Takeshi; Takenaka , Takeshi; Ohura , Syuichi

2013-01-01

Part III: Sustainable Services; International audience; This study examined improvement of labor productivity and elasticity of labor hour on sales of a multiproduct Japanese cuisine restaurant. Conventionally, multiproduct restaurant operations include a line production system in the kitchen. Japanese chefs are assumed to be low-skilled workers with staff members supported by someone. A cell production system is introduced into a Japanese Cuisine restaurant to improve it. Results show that t...

Life cycle assessment and the resilience of product systems

DEFF Research Database (Denmark)

Pizzol, Massimo

2015-01-01

Resilience is the capacity of systems to withstand and recover from disturbance, depends on the structure and architecture of a system, and plays a key role for the sustainability of complex systems. Despite its importance, resilience is not explicitly taken into account by studies of life cycle...... assessment (LCA), which main objective is determining the eco-efficiency of a product system with limited focus on its structure. The question is whether a product system which structure is improved or designed to be more resilient will result in being not only inefficient, but also eco-inefficient, when...... assessed by means of LCA. This study proposes a theoretical modelling approach to compare vulnerable and resilient product systems within the framework of LCA, consisting of assessment of disturbance and system expansion. Examples are provided where the theory is made operational. The structure...

The Mechanical Behavior of a 25Cr Super Duplex Stainless Steel at Elevated Temperature

Science.gov (United States)

Lasebikan, B. A.; Akisanya, A. R.; Deans, W. F.

2013-02-01

Super duplex stainless steel (SDSS) is a candidate material for production tubing in oil and gas wells and subsea pipelines used to transport corrosive hydrocarbon fluids. The suitability of this material for high temperature applications is examined in this article. The uniaxial tensile properties are determined for a 25Cr SDSS over a range of temperature relevant to high pressure-high temperature oil and gas wells. It is shown that there is a significant effect of temperature on the uniaxial tensile properties. Elevated temperature was shown to reduce the Young's modulus and increase the strain hardening index; temperature effects on these two parameters are usually neglected in the design of subsea pipelines and oil well tubulars, and this could lead to wrong predictions of the collapse pressure. The manufacturing process of the super duplex tubular did not lead to significant anisotropy in the hardness and the ultimate tensile and uniaxial yield strengths.

An inventory control model for biomass dependent production systems

International Nuclear Information System (INIS)

Grado, S.C.; Strauss, C.H.

1993-01-01

The financial performance of a biomass dependent production system was critiqued based on the development and validation of an inventory control model. Dynamic programming was used to examine the constraints and capabilities of producing ethanol from various biomass crops. In particular, the model evaluated the plantation, harvest, and manufacturing components of a woody biomass supply system. The optimum wood to ethanol production scheme produced 38 million litres of ethanol in the harvest year, at 13.6 million litre increase over the least optimal policy as demonstrated in the dynamic programming results. The system produced ethanol at a delivered cost of $0.38 L -1 which was consistent with the unit costs from other studies. Nearly 60% of the delivered costs were in ethanol production. The remaining costs were attributed to growing biomass (14%), harvest and shipment of the crop (18%), storage of the raw material and finished product (7%) and open-quotes lost salesclose quotes (2%). Inventory control, in all phases of production, proved to be an important cost consideration throughout the model. The model also analyzed the employment of alternative harvesting policies and the use of different or multiple feedstocks. A comparison between the least cost wood system and an even cut wood system further revealed the benefits of using an inventory control system

Carbon footprint and ammonia emissions of California beef production systems.

Science.gov (United States)

Stackhouse-Lawson, K R; Rotz, C A; Oltjen, J W; Mitloehner, F M

2012-12-01

Beef production is a recognized source of greenhouse gas (GHG) and ammonia (NH(3)) emissions; however, little information exists on the net emissions from beef production systems. A partial life cycle assessment (LCA) was conducted using the Integrated Farm System Model (IFSM) to estimate GHG and NH(3) emissions from representative beef production systems in California. The IFSM is a process-level farm model that simulates crop growth, feed production and use, animal growth, and the return of manure nutrients back to the land to predict the environmental impacts and economics of production systems. Ammonia emissions are determined by summing the emissions from animal housing facilities, manure storage, field applied manure, and direct deposits of manure on pasture and rangeland. All important sources and sinks of methane, nitrous oxide, and carbon dioxide are predicted from primary and secondary emission sources. Primary sources include enteric fermentation, manure, cropland used in feed production, and fuel combustion. Secondary emissions occur during the production of resources used on the farm, which include fuel, electricity, machinery, fertilizer, and purchased animals. The carbon footprint is the net exchange of all GHG in carbon dioxide equivalent (CO(2)e) units per kg of HCW produced. Simulated beef production systems included cow-calf, stocker, and feedlot phases for the traditional British beef breeds and calf ranch and feedlot phases for Holstein steers. An evaluation of differing production management strategies resulted in ammonia emissions ranging from 98 ± 13 to 141 ± 27 g/kg HCW and carbon footprints of 10.7 ± 1.4 to 22.6 ± 2.0 kg CO(2)e/kg HCW. Within the British beef production cycle, the cow-calf phase was responsible for 69 to 72% of total GHG emissions with 17 to 27% from feedlot sources. Holstein steers that entered the beef production system as a by-product of dairy production had the lowest carbon footprint because the emissions

Nitrogen performance indicators for dairy production systems

NARCIS (Netherlands)

Klein, De Cecile A.M.; Monaghan, Ross M.; Alfaro, Marta A.; Gourley, Cameron J.P.; Oenema, Oene; Mark Powell, J.

2017-01-01

Nitrogen (N) is invaluable for maintaining agricultural production, but its use, and particularly inefficient use, can lead to environmental losses. This paper reviews N use efficiency (NUE) and N surplus indicators for dairy production systems to assess their utility for optimising N use outcomes

Adoption of automated livestock production systems in Northern Europe

DEFF Research Database (Denmark)

Pedersen, Søren Marcus; Lind, Kim Martin Hjorth

2014-01-01

In the last decades the development of automated systems in livestock production has gained increasing interest among farmers. A combined use of computers and sensor systems has lead the development into new research areas with automated milking systems, grain drying systems and automated feeding...... on the relationship and adoption patterns among these countries. The paper presents the results of the surveyed population, demography, farm structure with livestock production characteristics and farmers use of selected automated systems in livestock production....... systems. The aim of this paper is to present the results of a farm survey and cluster analysis that have been made among 4 countries in Europe. This study is based on replies from 413 respondents in Germany (eastern part), Greece, Finland and Denmark, respectively, and the study comments...

Estimating New Product Success with the Use of Intelligent Systems

Directory of Open Access Journals (Sweden)

Relich Marcin

2014-12-01

Full Text Available The paper presents identifying success factors in new product development and selecting new product portfolio. The critical success factors are identified on the basis of an enterprise system, including the fields of project management, marketing and customer’s comments concerning the previous products. The model of measuring the success of a product includes the indicators such as duration and cost of product development, and net profit from a product. The proposed methodology is based on identification of the relationships between product success and project environment parameters with the use of artificial neural networks and fuzzy neural system that is compared with the results from linear model. The presented method contains the stages of knowledge discovery process such as data selection, data preprocessing, and data mining in the context of an enterprise resource planning system database. The illustrative example enhances a performance comparison of intelligent systems in the context of data preprocessing.

Multidisciplinary approach to successful implementation of production information system (PRISM)

Energy Technology Data Exchange (ETDEWEB)

Shariff, M.R.; Gopalakrishnan, S.G.; Francis, N. [and others

1995-12-31

A company wide corporate and regional production database supporting all production areas was envisaged critical to the current expansion within Petronas Carigali Sdn Bhd (PCSB). A multi disciplinary project team was thus formed to analyze the requirements prior to developing, testing, implementing and training users. PCSB has currently evolved into a mature E & P company on par with other E & P companies within the region. This expansion necessitates a common Production Information System for the efficient dissemination of vital Production Information for Production Surveillance, Reservoir Management, Reserve Assessment, Special Studies and Standardized Group-wide Reporting. This paper will discuss all the phases involved in the project which includes Systems Requirement Study, Data Migration, System Development, System Implementation and Post-Implementation Plan.

A production system for computerized emergency procedures tracking

International Nuclear Information System (INIS)

Petrick, W.; Ng, K.; Stuart, C.; Cain, D.

1988-01-01

This paper describes a methodology used to implement a computerized Emergency Operating Procedures (EOP) tracking system based on artificial intelligence (AI) technologies. In AI parlance, the system is a production system in which the knowledge representation is a set of productions (IF-THEN rules) which are interpreted by an inference engine or rule interpreter. The inference engine looks for pattern matches in the rule premises which lead to a conclusion. This inferred conclusion is subsequently used in further pattern matches. By separating the knowledge representation from the inference engine, the system can readily accommodate changes to the written procedures. The system is written in the C language and is co-resident on the same computer as the Safety Parameter Display System (SPDS). The plant EOPs have been written in about 250 rules which are evaluated in less than one second using about 10-20% of the CPU. The conclusions are available to multiple users within seconds after a parameter value changes. The benefits achieved with this production rule system include compatibility with the written procedures used as the knowledge source, compatibility with control room instrumentation, compatibility with the SPDS, realtime performance, and efficient computer usage

New association schemes for mono-ethylene glycol: Cubic-Plus-Association parameterization and uncertainty analysis

DEFF Research Database (Denmark)

Kruger, Francois; Kontogeorgis, Georgios M.; von Solms, Nicolas

2018-01-01

Accurate thermodynamic predictions for systems containing glycols are essential for the design and commissioning of novel subsea natural gas dehydration units. Previously it has been shown that the Cubic-Plus-Association (CPA) equation of state can be used to model VLE, SLE and LLE for mixtures...

Development of interface technology for nuclear hydrogen production system

International Nuclear Information System (INIS)

Lee, Ki Young; Park, J. K.; Chang, J. H.

2012-06-01

These works focus on the development of attainment indices for nuclear hydrogen key technologies, the analysis of the hydrogen production process and the performance estimation for hydrogen production systems, and the assessment of the nuclear hydrogen production economy. The codes for analyzing the hydrogen production economy are developed for calculating the unit production cost of nuclear hydrogen. We developed basic R and D quality management methodology to meet design technology of VHTR's needs. By putting it in practice, we derived some problems and solutions. We distributed R and D QAP and Q and D QAM to each teams and these are in operation. Computer simulations are performed for estimating the thermal efficiency for the electrodialysis component likely to adapting as one of the hydrogen production system in Korea and EED-SI process known as the key components of the hydrogen production systems. Using the commercial codes, the process diagrams and the spread-sheets were produced for the Bunsen reaction process, Sulphuric Acid dissolution process and HI dissolution process, respectively, which are the key components composing of the SI process

Corrosion monitoring using FSM technology

International Nuclear Information System (INIS)

Strommen, R.; Horn, H.; Gartland, P.O.; Wold, K.; Haroun, M.

1995-01-01

FSM is a non-intrusive monitoring technique based on a patented principle, developed for the purpose of detection and monitoring of both general and localized corrosion, erosion, and cracking in steel and metal structures, piping systems, and vessels. Since 1991, FSM has been used for a wide range of applications, including for buried and open pipelines, process piping offshore, subsea pipelines and flowlines, applications in the nuclear power industry, and in materials, research in general. This paper describes typical applications of the FSM technology, and presents operational experience from some of the land-based and subsea installations. The paper also describes recent enhancements in the FSM technology and in the analysis of FSM readings, allowing for monitoring and detailed quantification of pitting and mesa corrosion, and of corrosion in welds

The FSM technology -- Operational experience and improvements in local corrosion analysis

International Nuclear Information System (INIS)

Stroemmen, R.; Horn, H.; Gartland, P.O.; Wold, K.

1996-01-01

FSM (Field Signature Method) is a non-intrusive monitoring technique based on a patented principle, developed for the purpose of detection and monitoring of both general and localized corrosion, erosion and cracking in steel and metal structures, piping systems and vessels. Since 1991 FSM has been used for a wide range of applications e.g. for buried and open pipelines, process piping offshore, subsea pipelines and flowlines, applications in the nuclear power industry and in materials research in general. This paper describes typical applications of the FSM technology, and presents operational experience from some of the landbased and subsea installations. The paper also describes recent enhancements in the FSM technology and in the analysis of FSM readings, allowing for monitoring and detailed quantification of pitting and mesa corrosion, and of corrosion in welds

Novel Hydrogen Production Systems Operative at Thermodynamic Extremes

Energy Technology Data Exchange (ETDEWEB)

Gunsalus, Robert

2012-11-30

We have employed a suite of molecular, bioinformatics, and biochemical tools to interrogate the thermodynamically limiting steps of H{sub 2} production from fatty acids in syntrophic communities. We also developed a new microbial model system that generates high H{sub 2} concentrations (over 17% of the gas phase) with high H{sub 2} yields of over 3 moles H{sub 2} per mole glucose. Lastly, a systems-based study of biohydrogen production in model anaerobic consortia was performed to begin identifying key regulated steps as a precursor to modeling co-metabolism. The results of these studies significantly expand our ability to predict and model systems for H{sub 2} production in novel anaerobes that are currently very poorly documented or understood.

Life cycle assessment of agricultural biogas production systems

Energy Technology Data Exchange (ETDEWEB)

Lansche, J.; Muller, J. [Hohenheim Univ., Stuttgart (Germany). Inst. of Agricultural Engineering, Tropical and Subtropical Group

2010-07-01

Agricultural activities are large contributors to anthropogenic greenhouse gas emissions. This paper discussed the effectiveness of reducing agricultural emissions by using liquid manure to produce biogas. When using this technique, greenhouse gas emissions from manure storage are avoided and renewable energy is generated as heat and electricity in combined heat and power plants. The purpose of this study was to evaluate the environmental impacts of biogas production systems based on the methods of life cycle assessment. The traditional use of agricultural manures was compared with conventional energy production. The Gabi 4.3 software was used to create a model to evaluate the biogas production systems according to their environmental impact. In addition to the global warming potential, other impact categories were also used to evaluate the effects of the systems in eutrophication and acidification. It was concluded that environmental benefits can be obtained in terms of greenhouse gas emissions compared to electricity production from biogas with the typical German marginal electricity mix.

High Production Volume Information System (HPVIS)

Data.gov (United States)

U.S. Environmental Protection Agency — The High Production Volume Information System (HPVIS) provides access to select health and environmental effect information on chemicals that are manufactured in...

Characteristics of Strategies in Product/Service-System Development

DEFF Research Database (Denmark)

Tan, Adrian; McAloone, Timothy Charles

2006-01-01

The underlying principle in Product/Service-Systems (PSS) strategy is to shift from business based on the value of the transfer of product ownership and responsibility, to business based on the value of utility of the product and services. This paper identifies characteristics of various strategi...

Gulf team delivers on DP drillship promise

Energy Technology Data Exchange (ETDEWEB)

Flatern, R von

2001-06-01

The technological achievements of the project by Amoco and BP to complete a deepwater subsea well in the Gulf of Mexico from a dynamically positioned (DP) vessel are described. In 2000, the dual activity drillship, Discoverer Enterprise (owned by Transocean Sedco Forex), completed the Nile well in the Viosca Knoll area and then the King Well in Mississippi Canyon Block 85. Stringent safety and environmental protection criteria imposed by Amoco and BP drove the design of the Dril-Quip subsea wellhead to ensure that the wellhead profile and connector coped with the worst case scenario. BP also specified a disconnect system that would secure the well in less than a minute. The SenTREE 7 and Commander telemetry systems developed by Schlumberger, the components of the work string and test work with the Nile well to ensure BP conditions were met and that the perforation and surge procedure proceeded successfully are explained. The time reduction achieved by using large DP drillships and future BP plans are outlined.

Systems Thinking, Lean Production and Action Learning

Science.gov (United States)

Seddon, John; Caulkin, Simon

2007-01-01

Systems thinking underpins "lean" management and is best understood through action-learning as the ideas are counter-intuitive. The Toyota Production System is just that--a system; the failure to appreciate that starting-place and the advocacy of "tools" leads many to fail to grasp what is, without doubt, a significant…

Weapon System Requirements: Detailed Systems Engineering Prior to Product Development Positions Programs for Success

Science.gov (United States)

2016-11-01

modified, replaced, or sustained by consumers or different manufacturers in addition to the manufacturer that developed the system. It also allows...WEAPON SYSTEM REQUIREMENTS Detailed Systems Engineering Prior to Product Development Positions Programs for Success...Engineering Prior to Product Development Positions Programs for Success Why GAO Did This Study Cost and schedule growth in DOD major defense

The role of the production scheduling system in rescheduling

Science.gov (United States)

Kalinowski, K.; Grabowik, C.; Kempa, W.; Paprocka, I.

2015-11-01

The paper presents the rescheduling problem in the context of cooperation between production scheduling system (PSS) and other units in an integrated manufacturing environment - decision makers and software systems. The main aim is to discuss the PSS functionality for maximizing automation of the rescheduling process, reducing the response time and improving the quality of generated solutions. PSSs operate in the meeting of tactical and operational level of planning and control, and play an important role in the production preparation and control. On the basis of information about orders, technology and production system state (e.g. resources availability) they prepare and/or update a detailed plan of production flow - a schedule. All necessary data for scheduling and rescheduling are usually collected in other systems both from organizational and technical production preparation, e.g. ERP, PLM, MES, CAPP or others, as well as they are entered directly by the decision- makers/operators. Data acquired in this way are often incomplete and inconsistent. Therefore the existing rescheduling software works according to interactive method - rather support but does not replace the human decision maker in tasks planning. When rescheduling, due to the limited amount of time to make a decision this interaction is particularly important. An additional problem arises in data acquisition, in the process of data exchanging between systems or in the identification of new data sources and their processing. Different approaches to rescheduling were characterized, including those solutions, where all these operations are carried out by an autonomous system and those in which scheduling is performed only upon request from the outside, for the newly created scheduling data representing the current state of the production system.

Analysis and Behaviour Understanding of a Production System

Directory of Open Access Journals (Sweden)

Olga Ioana Amariei

2009-10-01

Full Text Available In production systems modelling usually acts to system simulation by discrete events. The present paper exemplifies this, using the Queuing System Simulation module of the WinQSB software

Competivity and management activities in die production systems

Directory of Open Access Journals (Sweden)

Mariana Rasina

2010-12-01

Full Text Available Currently for a production system to act on a global market must have a policy-oriented performance management to increase competitiveness. Performance management should be focused on improved performance by operating rules and principles, techniques, operating methods and tools for improving business performance. To track progress of production, performances should be a system of indicators, well made and systematically followed up.

Relational dynamics in the multi-helices knowledge production system

DEFF Research Database (Denmark)

Thai, Thi Minh; Hjortsø, Carsten Nico Portefée

-level dynamics are characterized by political ambidexterity that enables the state to maintain control by privileging traditional science and education constituencies, and at the same time support the transition of the knowledge production system towards international methodology and quality standards through......Drawing on the triple helix framework and organizational institutionalism, this article applies a qualitative research approach to analyze structures, institutional logics, power relations that shape inter-organizational relations and the structuration of a knowledge production system...... in an emerging economy. Findings highlight the emergence of a fifth-helices knowledge production system includes the state, science and education, industry, international actors, and society. The system comprises two major segments, one associated with the traditional command economy and characterized...

Production planning and control of less emitting production systems

Energy Technology Data Exchange (ETDEWEB)

Haasis, H.D. [Bremen Univ. (Germany)

1995-12-31

The concept of integral environmental protection has been growing in importance within Western Europe in recent years. Increasingly, it has come to be recognized that no one part of the environment is separate from any other, it functions as a whole. Yet, pollution control was until recently, usually based on an approach which considers emissions to air, water, and land separately. That has begun to change, particularly since the 1987 report by the World Commission on Environment and Development. This can be recognized, for example, within the proposal for a Directive of the Council of the European Union on Integrated Pollution Prevention and Control. By this, the environmental media are placed on an equal legislative footing so that the final result will be that the way in which an installation is operated will be better for the whole environment. In other words, less emission production systems are obtained. Realization of an integral concept or of less emission production systems initially requires technical measures for the avoidance and the minimization of emissions, as well as recovery and recycling of materials and substances

Production planning and control of less emitting production systems

Energy Technology Data Exchange (ETDEWEB)

Haasis, H D [Bremen Univ. (Germany)

1996-12-31

The concept of integral environmental protection has been growing in importance within Western Europe in recent years. Increasingly, it has come to be recognized that no one part of the environment is separate from any other, it functions as a whole. Yet, pollution control was until recently, usually based on an approach which considers emissions to air, water, and land separately. That has begun to change, particularly since the 1987 report by the World Commission on Environment and Development. This can be recognized, for example, within the proposal for a Directive of the Council of the European Union on Integrated Pollution Prevention and Control. By this, the environmental media are placed on an equal legislative footing so that the final result will be that the way in which an installation is operated will be better for the whole environment. In other words, less emission production systems are obtained. Realization of an integral concept or of less emission production systems initially requires technical measures for the avoidance and the minimization of emissions, as well as recovery and recycling of materials and substances

Environmental impacts and sustainability of egg production systems.

Science.gov (United States)

Xin, H; Gates, R S; Green, A R; Mitloehner, F M; Moore, P A; Wathes, C M

2011-01-01

As part of a systemic assessment toward social sustainability of egg production, we have reviewed current knowledge about the environmental impacts of egg production systems and identified topics requiring further research. Currently, we know that 1) high-rise cage houses generally have poorer air quality and emit more ammonia than manure belt (MB) cage houses; 2) manure removal frequency in MB houses greatly affects ammonia emissions; 3) emissions from manure storage are largely affected by storage conditions, including ventilation rate, manure moisture content, air temperature, and stacking profile; 4) more baseline data on air emissions from high-rise and MB houses are being collected in the United States to complement earlier measurements; 5) noncage houses generally have poorer air quality (ammonia and dust levels) than cage houses; 6) noncage houses tend to be colder during cold weather due to a lower stocking density than caged houses, leading to greater feed and fuel energy use; 7) hens in noncage houses are less efficient in resource (feed, energy, and land) utilization, leading to a greater carbon footprint; 8) excessive application of hen manure to cropland can lead to nutrient runoff to water bodies; 9) hen manure on open (free) range may be subject to runoff during rainfall, although quantitative data are lacking; 10) mitigation technologies exist to reduce generation and emission of noxious gases and dust; however, work is needed to evaluate their economic feasibility and optimize design; and 11) dietary modification shows promise for mitigating emissions. Further research is needed on 1) indoor air quality, barn emissions, thermal conditions, and energy use in alternative hen housing systems (1-story floor, aviary, and enriched cage systems), along with conventional housing systems under different production conditions; 2) environmental footprint for different US egg production systems through life cycle assessment; 3) practical means to mitigate air

Different approaches to overcome uncertainties of production systems

Science.gov (United States)

Azizi, Amir; Sorooshian, Shahryar

2015-05-01

This study presented a comprehensive review on the understanding of uncertainty and the current approaches that have been proposed to handle the uncertainties in the production systems. This paper classified proposed approaches into 11 groups. The paper studied 114 scholarly papers through various international journals. The paper added the latest findings to the body of knowledge to the current reservoir of understanding of the production uncertainties. Thus, the paper prepared the needs of researchers and practitioners for easy references in this area. This review also provided an excellent source to continue further studies on how to deal with the uncertainties of production system.

A documentation tool for product configuration systems - improving the documentation task

DEFF Research Database (Denmark)

Hvam, Lars; Jensen, Klaes Ladeby

2005-01-01

's experience with the procedure and the hitherto empirical experience from companies having applied the procedure have revealed that there is a need for an IT-based docu-mentation tool to support the process of constructing product configuration systems. Time can be saved by letting a documentation tool handle......Configuration systems are increasingly applied to automate the configuration of complex products. A configuration system is an expert system designed to combine specified modules according to constraints. The constraints are stored as product data and rules in a product model, and one of the most...... essential tasks is thus to develop a complete and consistent product model which can reflect the actual product. A procedure for building product models has been developed at the Centre for Product Modelling (CPM), and the pro-cedure has been successfully applied in several industrial companies. CPM...

Production systems of traditional leafy vegetables: Challenges for ...

African Journals Online (AJOL)

to access the indigenous or local knowledge associated with the production of these crops. This paper focuses on factors that are unique to TLV production systems. TLV production is dominated by women farmers in an attempt to sustain immediate household food security. The cultural environment within which the women ...

Targeting overall equipment efficiency for small medium enterprises with irregular production system

Science.gov (United States)

Prasetyawan, Y.; Suef, M.; Claudia, L.; Handayani, F. D.

2018-04-01

Overall Equipment Effectiveness (OEE) is widely used to measure the maturity of a production system. The company will be considered as World Class Manufacturing if it reaches more than 85% value, with near perfect value for availability, performance and quality factor. This assessment is usually taken on industries with regular production times named shift system. A typical 8 hours shift system is used in OEE measurement and performance monitoring. There are few Small to Medium Enterprise (SME) perform regular production times with shift systems, others using irregular production systems. The irregular production time in the SME production system is used because of demand fluctuations. This paper shows a quantitative analysis as a part of manufacturing system design to achieve a specific value of OEE for SME with irregular production systems, for individual businesses as well as collective business systems (some companies use the same production facilities for several processes). The results of experiments on several companies are presented, as a basis for determining the technical strategy of achieving OEE values.

Practice of building production planning system of company with a wide range of products - case study

Directory of Open Access Journals (Sweden)

Łukasz Hadaś

2012-09-01

Full Text Available Background: The complexity of the manufacturing environments of today's mechanical engineering companies and the number of both internal and external restrictions affecting to need of building tailored production planning and control systems. This statement is particularly important in conditions of companies with a wide range of products and different customer service strategies (different locations of the logistics decoupling point otherwise called "order penetration point". Streams of materials in these conditions require different management what is the main reason for carrying out research in business conditions by the authors. Material and methods: The research was carried out in industrial engineering in complex environmental conditions of production. This was a specializing in technology, multi-departments environment, with multiple streams of values and a wide range of products (about 500 items. The work was carried out under the transformation of the production system from the "push" logic of flow to "pull" logic of flow and building a dedicated system based on the best practice approach. Results: The paper describes the process of building tailored hybrid systems in the area of planning and shop flow control of production. The authors present the theoretical considerations on the issue and practical experiences. The authors present factors of selection of the transformation path and its road map. The article describes the part of the authors' own experience in the work on the methodology of transformation of Polish companies in the running business condition. Conclusions: Establishing the methodology of transformation of the production system is not a simple task. This paper presents only selected aspects of complex decision-making process. However, the authors presented work shows the important aspect of the transformation of production systems for these organizational conditions.

Energy use in pig production: an examination of current Iowa systems.

Science.gov (United States)

Lammers, P J; Kenealy, M D; Kliebenstein, J B; Harmon, J D; Helmers, M J; Honeyman, M S

2012-03-01

This paper compares energy use for different pig production systems in Iowa, a leader in US swine production. Pig production systems include not only the growth and performance of the pigs, but also the supporting infrastructure of pig production. This supporting infrastructure includes swine housing, facility management, feedstuff provision, swine diets, and manure management. Six different facility type × diet formulation × cropping sequence scenarios were modeled and compared. The baseline system examined produces 15,600 pigs annually using confinement facilities and a corn-soybean cropping sequence. Diet formulations for the baseline system were corn-soybean meal diets that included the synthetic AA l-lysine and exogenous phytase. The baseline system represents the majority of current US pork production in the Upper Midwest, where most US swine are produced. This system was found to require 744.6 MJ per 136-kg market pig. An alternative system that uses bedded hoop barns for grow-finish pigs and gestating sows would require 3% less (720.8 MJ) energy per 136-kg market pig. When swine production systems were assessed, diet type and feed ingredient processing were the major influences on energy use, accounting for 61 and 79% of total energy in conventional and hoop barn-based systems, respectively. Improving feed efficiency and better matching the diet formulation with the thermal environment and genetic potential are thus key aspects of reducing energy use by pig production, particularly in a hoop barn-based system. The most energy-intensive aspect of provisioning pig feed is the production of synthetic N for crop production; thus, effectively recycling manure nutrients to cropland is another important avenue for future research. Almost 25% of energy use by a conventional farrow-to-finish pig production system is attributable to operation of the swine buildings. Developing strategies to minimize energy use for heating and ventilation of swine buildings while

Building reactor operator sustain expert system with C language integrated production system

International Nuclear Information System (INIS)

Ouyang Qin; Hu Shouyin; Wang Ruipian

2002-01-01

The development of the reactor operator sustain expert system is introduced, the capability of building reactor operator sustain expert system is discussed with C Language Integrated Production System (Clips), and a simple antitype of expert system is illustrated. The limitation of building reactor operator sustain expert system with Clips is also discussed

Solar based hydrogen production systems

CERN Document Server

Dincer, Ibrahim

2013-01-01

This book provides a comprehensive analysis of various solar based hydrogen production systems. The book covers first-law (energy based) and second-law (exergy based) efficiencies and provides a comprehensive understanding of their implications. It will help minimize the widespread misuse of efficiencies among students and researchers in energy field by using an intuitive and unified approach for defining efficiencies. The book gives a clear understanding of the sustainability and environmental impact analysis of the above systems. The book will be particularly useful for a clear understanding

A systems perspective on nursing productivity.

Science.gov (United States)

North, Nicola; Hughes, Frances

2012-01-01

Recent New Zealand reports have identified the nursing workforce for its potential to make a significant contribution to increased productivity in health services. The purpose of this paper is to review critically the recent and current labour approaches to improve nursing productivity in New Zealand, in a context of international research and experience. An examination of government documents regarding productivity, and a review of New Zealand and international literature and research on nursing productivity and its measurement form the basis of the paper. It is found that productivity improvement strategies are influenced by theories of labour economics and scientific management that conceptualise a nurse as a labour unit and a cost to the organisation. Nursing productivity rose significantly with the health reforms of the 1990s that reduced nursing input costs but impacts on patient safety and nurses were negative. Current approaches to increasing nursing productivity, including the "productive ward" and reconfiguration of nursing teams, also draw on manufacturing innovations. Emerging thinking considers productivity in the context of the work environment and changing professional roles, and proposes reconceptualising the nurse as an intellectual asset to knowledge-intensive health organisations. Strategies that take a systems approach to nursing productivity, that view nursing as a capital asset, that focus on the interface between nurse and working environment and measure patient and nurse outcomes are advocated. The paper shows that reframing nursing productivity brings into focus management strategies to raise productivity while protecting nursing and patient outcomes.

Production-logistic system in the aspect of strategies for production planning and control and for logistic customer service

Directory of Open Access Journals (Sweden)

Łukasz Hadaś

2014-09-01

Full Text Available Background: The authors made multi-dimensional review of production and logistic strategies in order to prove their coherence in shaping internal and external supply chain. The paper is concluded with definition of production-logistic system as an object of modeling in transformation of business systems of manufacturing companies. Material and methods: The paper is based on analysis of state of the art presented in the literature on the subject of production and logistics strategies. Publications of key importance were selected to identify genesis and basic assumptions of strategies and their functioning. Comparative synthesis of logistic and production strategies identified is developed with respect to authors' experience in application of predefined tools and methods characteristic for strategies identified. Results: The result of the work conducted is consolidation of production and logistic strategies according to multi-variant customer service and original definition of production and logistic system. Conclusions: Production system and logistic system can and should be treated as equal elements in context of material flows management in internal and external supply chains. Such approach enables modeling of both systems as coherent elements realizing selected strategy of customer service.     

Co-production of hydrogen and methane from herbal medicine wastewater by a combined UASB system with immobilized sludge (H2 production) and UASB system with suspended sludge (CH4 production).

Science.gov (United States)

Sun, Caiyu; Hao, Ping; Qin, Bida; Wang, Bing; Di, Xueying; Li, Yongfeng

2016-01-01

An upflow anaerobic sludge bed (UASB) system with sludge immobilized on granular activated carbon was developed for fermentative hydrogen production continuously from herbal medicine wastewater at various organic loading rates (8-40 g chemical oxygen demand (COD) L(-1) d(-1)). The maximum hydrogen production rate reached 10.0 (±0.17) mmol L(-1) hr(-1) at organic loading rate of 24 g COD L(-1) d(-1), which was 19.9% higher than that of suspended sludge system. The effluents of hydrogen fermentation were used for continuous methane production in the subsequent UASB system. At hydraulic retention time of 15 h, the maximum methane production rate of 5.49 (±0.03) mmol L(-1) hr(-1) was obtained. The total energy recovery rate by co-production of hydrogen and methane was evaluated to be 7.26 kJ L(-1) hr(-1).

Proceedings of the 2011 hydrocarbon annual days - Innovation, technological and human challenges

International Nuclear Information System (INIS)

2011-01-01

This document gathers the available presentations (slides) given at the 2011 issue of the annual hydrocarbon days. The conference comprises 14 workshops and 5 plenary sessions dealing with: - Plenary 1 - oil and gas and the evolution of the world energy landscape: The new geopolitical energy landscape (Lesourne, J.); Macondo and Fukushima: what challenges for the industry and for Total? (Mosconi, J.J.); Natural gas: energy of the 21. century? (Bensasson, B.); - Workshop 1 - innovation in modeling, computer science and calculations: Tools at the engineering service - 3D visualisation mock-ups (Hoffert, J.L.; Bouget, F.); Basins modelling (Facon, J.); 'OCEAN' computer platform and calculation modules development (Dury, V.); - Workshop 2 - source rock hydrocarbons: Exploration-production (B. Courme); Aquifers monitoring technology (Lallier, S.); Hydraulic fracturing of schists (Faucompret, N.); - Workshop 3 - research, universities and industries, the innovating process: presentation of ANCRE actions - situation of research (Goffe, B.); Artificial photosynthesis - using solar energy for hydrogen and fuels production (Artero, V.); Partnership and competitiveness (Valadier, L.); - workshop 4 - marine innovations, new ships: new building ships for ultra-deep offshore and big pipelines (Ardavanis, K.); The Seven Borealis, a World-Class Strategic Enabler (Bost, F.); Application of innovation utilizing the Skandi Arctic through the use of the Pipeline Repair System (PRS) and the Personal Diving Equipment (PDE) (Grosjean, P.); - Workshop 5 - innovative Subsea equipments: Subsea: Way to Future - Fully Autonomous Plant (Riviere, L.); The 2. Generation DC All-Electric Subsea Production Control System (Van der Akker, J.); The power distribution module: an essential component in the submarine production chain (Eschbach, J.L.); Reeled installation of EHTF - Electrically Heat Traced Pipe-in-Pipe (Mair, J.); - Workshop 6 - seismic imaging: Towed streamer seismic strategies for sub

Production System of Peranakan Etawah Goat under Application of Feed Technology: Productivity and Economic Efficiency

Directory of Open Access Journals (Sweden)

Akhmad Sodiq

2009-09-01

Full Text Available Feed resources are the major constraint in increasing goat production in the village. The main constraints to goat raising are related to feeds (i the high cost of transport of crop residues and grass to the homesteads, (ii the low nutritive value of feeds used, particularly in the dry period. This research was design to evaluate goat productivity and economic efficiency of goat farming under application of feed technology production system in Peranakan Etawah goat farmer group of Gumelar Banyumas Central Java. All farmers were taken as respondents using census methods. On farm research with participative focused group discussion, indepth interview, and farm observation. Descriptive analysis and independent t test methods were used to analyze the data. Results of this study showed that there was a significant improvement goat productivity on production system with the application of feed technology. Body weight at weaning, survival rate till weaning, and doe productivity were increased 7%, 2% and 5%, respectively. There was no evidence of significant different of farmers income and economic efficiency before and after the applied feed technology (P>0.05. The calculation was based on cash flow. Before application, farmers income per year and economic efficiency were Rp14.404.520,00 and 1.21, then insignificantly improve into Rp16.487.100,00 and 1.27, respectively. (Animal Production 11(3: 202-208 (2009 Key Words: Livestock production system, Peranakan Etawah goat, feed technology aplication, productivity and economic efficiency

Unitary input DEA model to identify beef cattle production systems typologies

Directory of Open Access Journals (Sweden)

Eliane Gonçalves Gomes

2012-08-01

Full Text Available The cow-calf beef production sector in Brazil has a wide variety of operating systems. This suggests the identification and the characterization of homogeneous regions of production, with consequent implementation of actions to achieve its sustainability. In this paper we attempted to measure the performance of 21 livestock modal production systems, in their cow-calf phase. We measured the performance of these systems, considering husbandry and production variables. The proposed approach is based on data envelopment analysis (DEA. We used unitary input DEA model, with apparent input orientation, together with the efficiency measurements generated by the inverted DEA frontier. We identified five modal production systems typologies, using the isoefficiency layers approach. The results showed that the knowledge and the processes management are the most important factors for improving the efficiency of beef cattle production systems.

Microbiological quality of goat's milk obtained under different production systems

Directory of Open Access Journals (Sweden)

J.K. Kyozaire

2005-06-01

Full Text Available In order to determine the safety of milk produced by smallholder dairy goat farms, a farm-based research study was conducted on commercial dairy goat farms to compare the microbiological quality of milk produced using 3 different types of dairy goat production systems (intensive, semi-intensive and extensive. A survey of dairy goat farms in and around Pretoria carried out by means of a questionnaire revealed that most of the smallholder dairy goat farms surveyed used an extensive type of production system. The method of milking varied with the type of production system, i.e. machine milking; bucket system machine milking and hand-milking, respectively. Udder half milk samples (n=270 were analysed, of which 31.1 % were infected with bacteria. The lowest intra-mammary infection was found amongst goats in the herd under the extensive system (13.3 %, compared with 43.3 % and 36.7 % infection rates under the intensive and semi-intensive production systems, respectively. Staphylococcus intermedius (coagulase positive, Staphylococcus epidermidis and Staphylococcus simulans (both coagulase negative, were the most common cause of intramammary infection with a prevalence of 85.7 % of the infected udder halves. The remaining 14.3 % of the infection was due to Staphylococcus aureus. Bacteriology of bulk milk samples on the other hand, showed that raw milk obtained by the bucket system milking machine had the lowest total bacterial count (16 450 colony forming units (CFU/mℓ compared to that by pipeline milking machine (36 300 CFU/mℓ or handmilking (48 000 CFU/mℓ. No significant relationship was found between the somatic cell counts (SCC and presence of bacterial infection in goat milk. In comparison with the herds under the other 2 production systems, it was shown that dairy goat farming under the extensive production system, where hand-milking was used, can be adequate for the production of safe raw goat milk.

Multiscale simulation approach for battery production systems

CERN Document Server

Schönemann, Malte

2017-01-01

Addressing the challenge of improving battery quality while reducing high costs and environmental impacts of the production, this book presents a multiscale simulation approach for battery production systems along with a software environment and an application procedure. Battery systems are among the most important technologies of the 21st century since they are enablers for the market success of electric vehicles and stationary energy storage solutions. However, the performance of batteries so far has limited possible applications. Addressing this challenge requires an interdisciplinary understanding of dynamic cause-effect relationships between processes, equipment, materials, and environmental conditions. The approach in this book supports the integrated evaluation of improvement measures and is usable for different planning horizons. It is applied to an exemplary battery cell production and module assembly in order to demonstrate the effectiveness and potential benefits of the simulation.

New subsea X tree generation brings innovative features providing efficiency for ultra deep waters

Energy Technology Data Exchange (ETDEWEB)

Araujo, Gustavo Bellot de Almeida; Labes, Alan Zaragoza [FMC Technologies, Houston, TX (United States)

2008-07-01

The EVDT has been developed for global applications. Based upon the widely field proven 10 K Vertical Tree and 15 K HPHT Tree, the system has incorporated the latest technological advancements. The Tubing Hanger System and installation tooling are available up to a 7 inch bore for 10,000 psi applications and a 5 inch bore for 15,000 psi applications. The Tubing Hanger can be installed using a Tubing Head when flexibility for sequencing of events is required during offshore installations. Or it can simply land into the wellhead, eliminating the Tubing Head. This allows for a more efficient installation when completion and drilling operations are conducted without retrieving the Sub sea Blow Out Preventer (BOP) and Riser. The EVDT incorporates a retrievable Flow Module downstream of the wing valve that can be configured to project specific variances such as production, gas injection and water injection service. The Flow Module can also be configured to include Multi-Phase Flow Meters, sensors, and gauges. This allows an upgrade sub sea without having to pull and re-run the entire Tree system. These features allowed the system to hit the mark regarding what the industry needs today and also allowed to accommodate technologies that will arise in the years to come. (author)

Management systems in production operations

International Nuclear Information System (INIS)

Walters, K.B.; Henderson, G.

1993-01-01

The Cullen Enquiry into the Piper Alpha disaster in the U.K. North Sea recommended that an operator should formally present it's company Management System and demonstrate how safety is achieved throughout the life cycle of a platform, from design through operation to abandonment. Brunei Shell Petroleum has prepared a corporate level Safety Management System. As part of Safety Case work, the corporate system is being extended to include the development of specific Management Systems with particular emphasis on offshore production operations involving integrated oil and gas facilities. This paper will describe the development of Management Systems, which includes an intensive Business Process Analysis and will comment upon it's applicability and relationship to ISO 9000. The paper will further describe the applicability and benefits of Management Systems and offer guidance on required effort. The paper will conclude that development of structured Management Systems for safety critical business processes is worthwhile but prioritization of effort will be necessary. As such the full adoption of Management Systems will be directional in nature

Increasing radiographer productivity by an incentive point system.

Science.gov (United States)

Williams, B; Chacko, P T

1983-01-01

Because of a very low technologist productivity in their Radiology Department, the authors describe a Productive Point System they developed and implemented to solve this personnel problem. After establishing the average time required to perform all exams, point credits (one point for every ten minutes utilized) were assigned to each exam performed, thereby determining an index of production. A Productive Index of 80% was considered realistic and was the equivalent of 192 points for a 40-hour work week. From 1975 to 1978 personal productivity increased from 79% to 113%. This resulted in an average yearly fiscal savings of over $20,000.00 for this three-year period. There was also a significant improvement in exam efficiency and quality, job attitude, personnel morale, and public relations. This program was highly successful because technologist acceptance and cooperation was complete, and this occurred mainly because the system supports the normal occupational goals and expectations of technologists.

Entree Production Guides for Cook/Freeze Systems

Science.gov (United States)

1983-03-01

92.29 50.00 22,680 1. Fill roasting pans with cut-up chicken . Salt 0.35 0.19 86 2. Combine ingredients listed Pepper, black 0.07 0.04 18 in this...INSTALLATIONS FREEZING RECIPES HOSPITAL FEEDING i, WACT (Vmentbs m reves - W neete y lsmer ~lr y block nguber) Entree production guides have been...control and better use of personnel. Standard recipes must be adapted to production guides for use in cook/freeze systems. Products must withstand the

Forage based animal production systems and sustainability, an invited keynote

Directory of Open Access Journals (Sweden)

Abdul Shakoor Chaudhry

2008-07-01

Full Text Available Forages are essential for the successful operation of animal production systems. This is more relevant to ruminants which are heavily dependant upon forages for their health and production in a cost-effective and sustainable manner. While forages are an economical source of nutrients for animal production, they also help conserve the soil integrity, water supply and air quality. Although the role of these forages for animal production could vary depending upon the regional preferences for the animal and forage species, climate and resources, their importance in the success of ruminant production is acknowledged. However with the increasing global human population and urbanisation, the sustainability of forage based animal production systems is sometimes questioned due to the interrelationship between animal production and the environment. It is therefore vital to examine the suitability of these systems for their place in the future to supply quality food which is safe for human consumption and available at a competitive price to the growing human population. Grassland and forage crops are recognised for their contribution to the environment, recreation and efficiency of meat and milk production,. To maintain sustainability, it is crucial that such farming systems remain profitable and environmentally friendly while producing nutritious foods of high economical value. Thus, it is pertinent to improve the nutritive value of grasses and other forage plants in order to enhance animal production to obtain quality food. It is also vital to develop new forages which are efficiently utilised and wasted less by involving efficient animals. A combination of forage legumes, fresh or conserved grasses, crop residues and other feeds could help develop an animal production system which is economically efficient, beneficial and viable. Also, it is crucial to use efficient animals, improved forage conservation methods, better manure handling, and minimum

Exploring agricultural production systems and their fundamental components with system dynamics modeling

Science.gov (United States)

Agricultural production in the United States is undergoing marked changes due to rapid shifts in consumer demands, input costs, and concerns for food safety and environmental impact. Agricultural production systems are comprised of multidimensional components and drivers that interact in complex wa...

Assessment of the Kid Production Traits of Kacang Goat Under Smallholders Production System

OpenAIRE

Sodiq, A; Priyono, A; Tawfik, ES

2010-01-01

The main objectives of this study were to assess the influence of environmental (non-genetic) factors on kid production traits of Kacang goat under smallholders production system. The study was conducted at the Kacang goat smallholders, located at the centre of Kacang goat in Gundi subdistric, Purwodadi regency, Central Java. The kid production traits evaluated are birth weight, weaning weight, and growth rate till weaning. The environmental factors assessed were: sex (male, female), type of ...

ACTIVE PACKAGING SYSTEM FOR MEAT AND MEAT PRODUCTS

Directory of Open Access Journals (Sweden)

Adriana Pavelková

2012-10-01

Full Text Available In the recent past, food packaging was used to enable marketing of products and to provide passive protection against environmental contaminations or influences that affect the shelf life of the products. However, unlike traditional packaging, which must be totally inert, active packaging is designed to interact with the contents and/or the surrounding environment. Interest in the use of active packaging systems for meat and meat products has increased in recent years. Active packaging systems are developed with the goal of extending shelf life for foods and increasing the period of time that the food is high quality. Developments in active packaging have led to advances in many areas, including delayed oxidation and controlled respiration rate, microbial growth, and moisture migration. Active packaging technologies include some physical, chemical, or biological action which changes interactions between a package, product, and/or headspace of the package in order to get a desired outcome. Active packaging systems discussed include oxygen scavengers, carbon dioxide scavengers and emitters, moisture control agents, flavour/odour absorbers and releasers  and antimicrobial packaging technologies. Active packaging is typically found in two types of systems; sachets and pads which are placed inside of packages, and active ingredients that are incorporated directly into packaging materials.  Recognition of the benefits of active packaging technologies by the food industry, development of economically viable packaging systems and increased consumer acceptance is necessary for commercial realisation of these packaging technologies.doi:10.5219/205

Development of Hybrid Product Breakdown Structure for NASA Ground Systems

Science.gov (United States)

Monaghan, Mark W.; Henry, Robert J.

2013-01-01

The Product Breakdown Structure is traditionally a method of identification of the products of a project in a tree structure. It is a tool used to assess, plan, document, and display the equipment requirements for a project. It is part of a product based planning technique, and attempts to break down all components of a project in as much detail as possible, so that nothing is overlooked. The PBS for ground systems at the Kennedy Space Center is being developed to encompass the traditional requirements including the alignment of facility, systems, and components to the organizational hierarchy. The Ground Operations Product Breakdown Structure is a hybrid in nature in that some aspects of a work breakdown structure will be incorporated and merged with the Architecture Concept of Operations, Master Subsystem List, customer interface, and assigned management responsibility. The Ground Operations Product Breakdown Structure needs to be able to identify the flexibility of support differing customers (internal and external) usage of ground support equipment within the Kennedy Space Center launch and processing complex. The development of the Product Breakdown Structure is an iterative activity Initially documenting the organization hierarchy structure and relationships. The Product Breakdown Structure identifies the linkage between the customer program requirements, allocation of system resources, development of design goals, and identification logistics products. As the Product Breakdown Structure progresses the incorporation of the results of requirement planning for the customer occurs identifying facility needs and systems. The mature Product Breakdown Structure is baselined with a hierarchical drawing, the Product Breakdown Structure database, and an associated document identifying the verification of the data through the life cycle of the program/product line. This paper will document, demonstrate, and identify key aspects of the life cycle of a Hybrid Product

Research on the ITOC based scheduling system for ship piping production

Science.gov (United States)

Li, Rui; Liu, Yu-Jun; Hamada, Kunihiro

2010-12-01

Manufacturing of ship piping systems is one of the major production activities in shipbuilding. The schedule of pipe production has an important impact on the master schedule of shipbuilding. In this research, the ITOC concept was introduced to solve the scheduling problems of a piping factory, and an intelligent scheduling system was developed. The system, in which a product model, an operation model, a factory model, and a knowledge database of piping production were integrated, automated the planning process and production scheduling. Details of the above points were discussed. Moreover, an application of the system in a piping factory, which achieved a higher level of performance as measured by tardiness, lead time, and inventory, was demonstrated.

Bioelectrochemical Systems for Indirect Biohydrogen Production

KAUST Repository

Regan, John M.; Yan, Hengjing

2014-01-01

by exoelectrogens at the anode. As an indirect approach to biohydrogen production, these systems are not subject to the hydrogen yield constraints of fermentative processes and have been proven to work with virtually any biodegradable organic substrate

Systemic representation of a production system: the Sagace method

International Nuclear Information System (INIS)

Benkhannouche, S.; Penalva, J.M.

1993-01-01

The systemic approach used in this study is devoted at a high level radioactive waste vitrification pilot. The Sagace method permits to realize a global view of this pilot plant taking in account the process, the production subsystems and the control process subsystems. 4 figs., 4 refs

Autocorrelation in queuing network type production systems - revisited

DEFF Research Database (Denmark)

Nielsen, Erland Hejn

-production systems (Takahashi and Nakamura, 1998) establishes that autocorrelation plays definitely a non-negligible role in relation to the dimensioning as well as functioning of Kanban-controlled production flow lines . This must logically either imply that production managers are missing an important aspect...... in their production planning reasoning, or that the 'realistic' autocorrelation patterns , inherent in actual production setups , are not like those so far considered in the literature. In this paper, an attempt to characterise relevant and 'realistic' types of autocorrelation schemes as well as their levels...

How Offshoring Elicits Reconfiguration of the Service Production System

DEFF Research Database (Denmark)

Brandl, Kristin; Mol, Michael J.; Petersen, Bent

Service production systems can be seen as a structure consisting of task execution, resources executing tasks and the service output received by the client. Offshoring acts as an exogenous shock to such a service production system. Drawing on practice theory and applying a multiple case methodology...... of the impact of offshoring and to practice theory....

Late Jute seed production in cropland agroforestry system

OpenAIRE

Kazi Noor-E-Alam Jewel; Md. Mujibur Rahman; Mohammad Shahjahan; Sayeeduz zaman

2015-01-01

Farmers were not self-sufficient in jute seed production and cultivation to avoid use exotic jute seed from different resources. Though the conventional method of jute seed production was not enough to meet the demand of farmers because of shrinkage of jute seed production land. So, late jute seed production technique was applied in agroforestry systems at both established and newly developed orchards. The study was conducted in the selected three sites of Rangpur, Dinajpur and Faridpur. Both...

Integrated system of production information processing for surface mines

Energy Technology Data Exchange (ETDEWEB)

Li, K.; Wang, S.; Zeng, Z.; Wei, J.; Ren, Z. [China University of Mining and Technology, Xuzhou (China). Dept of Mining Engineering

2000-09-01

Based on the concept of geological statistic, mathematical program, condition simulation, system engineering, and the features and duties of each main department in surface mine production, an integrated system for surface mine production information was studied systematically and developed by using the technology of data warehousing, CAD, object-oriented and system integration, which leads to the systematizing and automating of the information management, data processing, optimization computing and plotting. In this paper, its overall object, system design, structure and functions and some key techniques were described. 2 refs., 3 figs.

REVIEW OF AQUACULTURAL PRODUCTION SYSTEM MODELS

African Journals Online (AJOL)

user

models of aquacultural production systems with the aim of adopting a suitable one for ... of predicting the environmental condition, so as to determine point of diminishing returns and optimize yield in an ..... sale of fish are also tracked.

Technology versus Agro-Ecology in Designing Vegetable Production Systems in the Netherlands

NARCIS (Netherlands)

Haan, de J.J.; Sukkel, W.; Stilma, E.S.C.

2010-01-01

Current open field vegetable production systems in the Netherlands do not meet market and societal demands. These demands could not be fulfilled by adapting current production systems. Other kinds of production systems are needed and therefore two types of systems are designed by 1) a technological

Evaluation of hydrogen production system coupling with HTTR using dynamic analysis code

International Nuclear Information System (INIS)

Sato, Hiroyuki; Ohashi, Hirofumi; Inaba, Yoshitomo; Nishihara, Tetsuo; Hayashi, Koji; Inagaki, Yoshiyuki

2006-01-01

The Japan Atomic Energy Agency (JAEA) was entrusted 'Development of Nuclear Heat Utilization Technology' by Ministry of Education, Culture, Sports, Science and Technology. In this development, the JAEA investigated the system integration technology to couple the hydrogen production system by steam reforming with the High Temperature Engineering Test Reactor (HTTR). Prior to the construction of the hydrogen production system coupling with the HTTR, a dynamic analysis code had to be developed to evaluate the system transient behaviour of the hydrogen production system because there are no examples of chemical facilities coupled with nuclear reactor in the world. This report describes the evaluation of the hydrogen production system coupling with HTTR using analysis code, N-HYPAC, which can estimate transient behaviour of the hydrogen production system by steam reforming. The results of this investigation provide that the influence of the thermal disturbance caused by the hydrogen production system on the HTTR can be estimated well. (author)

In vitro meat production system: why and how?

Science.gov (United States)

Sharma, Shruti; Thind, Sukhcharanjit Singh; Kaur, Amarjeet

2015-12-01

Due to the nutritional importance and the sustained popularity of meat as a foodstuff, the livestock production sector has been expanding incessantly. This exponential growth of livestock meat sector poses a gigantic challenge to the sustainability of food production system. A new technological breakthrough is being contemplated to develop a substitute for livestock meat. The idea is to grow meat in a culture in the lab and manipulate its composition selectively. This paper aims to discuss the concept of In Vitro Meat production system, articulate the underlying technology and analyse the context of its implications, as proposed by several scientists and stakeholders. The challenges facing this emerging technology have also been discussed.

Auditing Information System : Delivery Product Service

Directory of Open Access Journals (Sweden)

Purwoko Purwoko

2011-05-01

Full Text Available Purpose of the research is to ensure the securities of information system asset and to ensure if informa-tion system support the operational and data collected was valid. Research method that used in this research were library studies and field studies. Field studies such an observation, questioner, and inter-view. the expected result are founding the weakness of security management control, operational man-agement control, input control, and output control of risk happened in the company. Conclusion of this research are the system on the company work good and there’s no potential risk happened and make an impact to the delivery process of information system.Index Terms - Auditing Information system, Delivery product process.

Introducing radioactivity monitoring systems in the production of steel

International Nuclear Information System (INIS)

Sofilic, T.; Marjanovic, T.; Rastovcan-Mioc, A.

2005-01-01

Over the last twenty years, a significant number of cases of radioactive pollution has been recorded in metallurgical processes. However, it is not certain whether the pollution was caused by increased uncontrolled disposal of waste containing radionuclides or whether it was the result of increased radioactivity monitoring and control of metallic scrap. Many metal producers in the world have therefore implemented systematic monitoring of radioactivity in their production processes. Special attention was given to monitoring radioactivity in steel making processes, which is still the most applied construction material with an annual output of over billion tonnes all over the world. Drawing on the experience of the best known steel producers in Europe and world, Croatian steel mills find it necessary and justified to introduce radioactivity monitoring and control systems of radioactive elements in steel scrap, semi-finished and finished products. The aim of this paper is to point out the need to introduce the radioactivity monitoring and control in steel and steel-casting production, and to inform experts in Croatian steel mills and foundries about potential solutions and current systems. At the same time, we wanted to demonstrate how implementation of monitoring equipment can improve quality management and environmental management systems. This would render Croatian products competitive on the European market both in terms of physical and chemical properties and in terms of product quality certificates and radioactivity information. Since we lack our own standards and regulations to control both domestic and imported steel scrap, semi-finished products (crude steel, hot and cold rolled strip) and finished products, we need apply current international recommendations and guidelines, until we design our own monitoring system and adopt relevant legislation on the national level. This paper describes basic types of radioactivity monitoring and control systems, the most

Multiperiod planning tool for multisite pig production systems.

Science.gov (United States)

Nadal-Roig, E; Plà, L M

2014-09-01

This paper presents a multiperiod planning tool for multisite pig production systems based on Linear Programming (LP). The aim of the model is to help pig managers of multisite systems in making short-term decisions (mainly related to pig transfers between farms and batch management in fattening units) and mid-term or long-term decisions (according to company targets and expansion strategy). The model skeleton follows the structure of a three-site system that can be adapted to any multisite system present in the modern pig industry. There are three basic phases, namely, piglet production, rearing pigs, and fattening. Each phase involves a different set of farms; therefore, transportation between farms and delivering of pigs to the abattoir are under consideration. The model maximizes the total gross margin calculated from the income of sales to the abattoir and the production costs over the time horizon considered. Production cost depends on each type of farm involved in the process. Parameters like number of farms per phase and distance, farm capacity, reproduction management policies, feeding and veterinary expenses, and transportation costs are taken into account. The model also provides a schedule of transfers between farms in terms of animals to be transported and number of trucks involved. The use of the model is illustrated with a case study based on a real instance of a company located in Catalonia (Spain).

Continuous hydroponic wheat production using a recirculating system

Science.gov (United States)

Mackowiak, C. L.; Owens, L. P.; Hinkle, C. R.; Prince, R. P.

1989-01-01

Continuous crop production, where plants of various ages are growing simultaneously in a single recirculating nutrient solution, is a possible alternative to batch production in a Controlled Ecological Life Support System. A study was conducted at John F. Kennedy Space Center where 8 trays (0.24 sq m per tray) of Triticum aestivum L. Yecora Rojo were grown simultaneously in a growth chamber at 23 C, 65 percent relative humidity, 1000 ppm CO2, continuous light, with a continuous flow, thin film nutrient delivery system. The same modified Hoagland nutrient solution was recirculated through the plant trays from an 80 L reservoir throughout the study. It was maintained by periodic addition of water and nutrients based on chemical analyses of the solution. The study was conducted for 216 days, during which 24 trays of wheat were consecutively planted (one every 9 days), 16 of which were grown to maturity and harvested. The remaining 8 trays were harvested on day 216. Grain yields averaged 520 g m(exp -2), and had an average edible biomass of 32 percent. Consecutive yields were unaffected by nutrient solution age. It was concluded that continual wheat production will work in this system over an extended period of time. Certain micronutrient deficiencies and toxicities posed problems and must be addressed in future continuous production systems.

Automatic milking systems, farm size, and milk production.

Science.gov (United States)

Rotz, C A; Coiner, C U; Soder, K J

2003-12-01

Automatic milking systems (AMS) offer relief from the demanding routine of milking. Although many AMS are in use in Europe and a few are used in the United States, the potential benefit for American farms is uncertain. A farm-simulation model was used to determine the long-term, whole-farm effect of implementing AMS on farm sizes of 30 to 270 cows. Highest farm net return to management and unpaid factors was when AMS were used at maximal milking capacity. Adding stalls to increase milking frequency and possibly increase production generally did not improve net return. Compared with new traditional milking systems, the greatest potential economic benefit was a single-stall AMS on a farm size of 60 cows at a moderate milk production level (8600 kg/cow). On other farm sizes using single-stall type robotic units, losses in annual net return of 0 dollars to 300 dollars/cow were projected, with the greatest losses on larger farms and at high milk production (10,900 kg/cow). Systems with one robot serving multiple stalls provided a greater net return than single-stall systems, and this net return was competitive with traditional parlors for 50- to 130-cow farm sizes. The potential benefit of AMS was improved by 100 dollars/cow per year if the AMS increased production an additional 5%. A 20% reduction in initial equipment cost or doubling milking labor cost also improved annual net return of an AMS by up to 100 dollars/cow. Annual net return was reduced by 110 dollars/cow, though, if the economic life of the AMS was reduced by 3 yr for a more rapid depreciation than that normally used with traditional milking systems. Thus, under current assumptions, the economic return for an AMS was similar to that of new parlor systems on smaller farms when the milking capacity of the AMS was well matched to herd size and milk production level.

Treat a new and efficient match algorithm for AI production system

CERN Document Server

Miranker, Daniel P

1988-01-01

TREAT: A New and Efficient Match Algorithm for AI Production Systems describes the architecture and software systems embodying the DADO machine, a parallel tree-structured computer designed to provide significant performance improvements over serial computers of comparable hardware complexity in the execution of large expert systems implemented in production system form.This book focuses on TREAT as a match algorithm for executing production systems that is presented and comparatively analyzed with the RETE match algorithm. TREAT, originally designed specifically for the DADO machine architect

Environmental effect of constructed wetland as biofuel production system

Science.gov (United States)

Liu, Dong

2017-04-01

Being as a renewable energy, biofuel has attracted worldwide attention. Clean biofuel production is an effective way to mitigate global climate change and energy crisis. Biofuel may offer a promising alternative to fossil fuels, but serious concerns arise about the adverse greenhouse gas consequences from using nitrogen fertilizers. Waste-nitrogen recycling is an attractive idea. Here we advocate a win-win approach to biofuel production which takes advantage of excessive nitrogen in domestic wastewater treated via constructed wetland (CW) in China. This study will carry on environmental effect analysis of CW as a biomass generation system through field surveys and controllable simulated experiments. This study intends to evaluate net energy balance, net greenhouse effect potential and ecosystem service of CW as biomass generation system, and make comparation with traditional wastewater treatment plant and other biofuel production systems. This study can provide a innovation mode in order to solve the dilemma between energy crops competed crops on production land and excessive nitrogen fertilizer of our traditional energy plant production. Data both from our experimental CWs in China and other researches on comparable CWs worldwide showed that the biomass energy yield of CWs can reach 182.3 GJ ha-1 yr-1, which was two to eight times higher than current biofuel-production systems. Energy output from CW was ˜137% greater than energy input for biofuel production. If CWs are designed with specific goal of biofuel production, biofuel production can be greatly enhanced through the optimization of N supply, hydraulic structures, and species selection in CWs. Assuming that 2.0 Tg (1 Tg = 1012 g) waste nitrogen contained in domestic wastewater is treated by CWs, biofuel production can account for 1.2% of national gasoline consumption in China. The proportion would increase to 6.7% if extra nitrogen (9.5 Tg) from industrial wastewater and agricultural runoff was included

Preliminary Cost Estimates for Nuclear Hydrogen Production: HTSE System

International Nuclear Information System (INIS)

Yang, K. J.; Lee, K. Y.; Lee, T. H.

2008-01-01

KAERI is now focusing on the research and development of the key technologies required for the design and realization of a nuclear hydrogen production system. As a preliminary study of cost estimates for nuclear hydrogen systems, the hydrogen production costs of the nuclear energy sources benchmarking GTMHR and PBMR are estimated in the necessary input data on a Korean specific basis. G4-ECONS was appropriately modified to calculate the cost for hydrogen production of HTSE (High Temperature Steam Electrolysis) process with VHTR (Very High Temperature nuclear Reactor) as a thermal energy source. The estimated costs presented in this paper show that hydrogen production by the VHTR could be competitive with current techniques of hydrogen production from fossil fuels if CO 2 capture and sequestration is required. Nuclear production of hydrogen would allow large-scale production of hydrogen at economic prices while avoiding the release of CO 2 . Nuclear production of hydrogen could thus become the enabling technology for the hydrogen economy. The major factors that would affect the cost of hydrogen were also discussed

National Strategy for Modernizing the Regulatory System for Biotechnology Products

Science.gov (United States)

This National Strategy for Modernizing the Regulatory System for Biotechnology Products sets forth a vision for ensuring that the federal regulatory system is prepared to efficiently assess the risks, if any, of the future products of biotechnology.

Robustness analysis of pull strategies in multi-product systems

Directory of Open Access Journals (Sweden)

Chukwunonyelum Emmanuel Onyeocha

2015-09-01

Full Text Available Purpose: This paper examines the behaviour of shared and dedicated Kanban allocation policies of Hybrid Kanban-CONWIP and Basestock-Kanban-CONWIP control strategies in multi-product systems; with considerations to robustness of optimal solutions to environmental and system variabilities. Design/methodology/approach: Discrete event simulation and evolutionary multi-objective optimisation approach were utilised to develop Pareto-frontier or sets of non-dominated optimal solutions and for selection of an appropriate decision set for the control parameters in the shared Kanban allocation policy (S-KAP and dedicated Kanban allocation policy (D-KAP. Simulation experiments were carried out via ExtendSim simulation application software. The outcomes of PCS+KAP performances were compared via all pairwise comparison and Nelson’s screening and selection procedure for superior PCS+KAP under negligible environmental and system stability. To determine superior PCS+KAP under systems’ and environmental variability, the optimal solutions were tested for robustness using Latin hypercube sampling technique and stochastic dominance test. Findings: The outcome of this study shows that under uncontrollable environmental variability, dedicated Kanban allocation policy outperformed shared Kanban allocation policy in serial manufacturing system with negligible and in complex assembly line with setup times. Moreover, the BK-CONWIP is shown as superior strategy to HK-CONWIP. Research limitations/implications: Future research should be conducted to verify the level of flexibility of BK-CONWIP with respect to product mix and product demand volume variations in a complex multi-product system Practical implications: The outcomes of this work are applicable to multi-product manufacturing industries with significant setup times and systems with negligible setup times. The multi-objective optimisation provides decision support for selection of control-parameters such that

Production system with process quality control: modelling and application

Science.gov (United States)

Tsou, Jia-Chi

2010-07-01

Over the past decade, there has been a great deal of research dedicated to the study of quality and the economics of production. In this article, we develop a dynamic model which is based on the hypothesis of a traditional economic production quantity model. Taguchi's cost of poor quality is used to evaluate the cost of poor quality in the dynamic production system. A practical case from the automotive industry, which uses the Six-sigma DMAIC methodology, is discussed to verify the proposed model. This study shows that there is an optimal value of quality investment to make the production system reach a reasonable quality level and minimise the production cost. Based on our model, the management can adjust its investment in quality improvement to generate considerable financial return.

JIT maintenance improves the productivity and energy efficiency of the system

Directory of Open Access Journals (Sweden)

Marković Željko M.

2016-01-01

Full Text Available Maintenance planning in order to ensure the smooth functioning of the system, optimal interaction of system with the environment, and timely responses to the set requirements is one of the most important internal resources of the organization. Just-In-Time Maintenance enables rarely downtime and lower maintenance costs throughout the life cycle of the system, and dramatically increases the productivity and energy efficiency of the entire system. By adopting of the Just-In-Time Maintenance philosophy, minimum of objective function of energy or production system, as well as of production of services system, is achieved.

Importance of systems biology in engineering microbes for biofuel production

Energy Technology Data Exchange (ETDEWEB)

Mukhopadhyay, Aindrila; Redding, Alyssa M.; Rutherford, Becky J.; Keasling, Jay D.

2009-12-02

Microorganisms have been rich sources for natural products, some of which have found use as fuels, commodity chemicals, specialty chemicals, polymers, and drugs, to name a few. The recent interest in production of transportation fuels from renewable resources has catalyzed numerous research endeavors that focus on developing microbial systems for production of such natural products. Eliminating bottlenecks in microbial metabolic pathways and alleviating the stresses due to production of these chemicals are crucial in the generation of robust and efficient production hosts. The use of systems-level studies makes it possible to comprehensively understand the impact of pathway engineering within the context of the entire host metabolism, to diagnose stresses due to product synthesis, and provides the rationale to cost-effectively engineer optimal industrial microorganisms.

Research on the hydrogeological and geochemical conditions at the coastal area and submarine formations

International Nuclear Information System (INIS)

Tokunaga, Tomochika; Taniguchi, Makoto; Goto, Junji

2003-05-01

One of the major concerns for the high-level radioactive waste disposal is the possibility of the radionuclides to reach biosphere by groundwater flow. Recent research results have shown that the fresh groundwater discharge from subsea formations are widespread phenomena, thus, it is necessary to evaluate the submarine groundwater discharge as possible pathways of contaminant discharge towards the biosphere. It is also important to unravel the groundwater flow and associated material transport at the coastal area and subsea formations. To better understand the groundwater flow processes and the submarine groundwater discharge, we have conducted the hydrological, hydrogeological, geochemical, and numerical modeling studies at the Kurobe alluvial fan and its offshore, Toyama Prefecture, Japan. In this report, the results of the following research activities are presented: 1) Development and application of a method to detect the locations of the submarine groundwater discharge. 2) Development and application of a method to collect uncontaminated groundwater samples from subsea formations. 3) Measurements of submarine groundwater discharge fluxes by automated seepage meter. 4) Hydrological and geochemical studies for groundwater flow at the coastal area. 5) Geochemical studies to understand sources of fresh submarine groundwater discharge. 6) Examination of groundwater flow and submarine groundwater discharge using methane concentration and carbon isotope ratio. 7) Numerical modeling studies for coastal groundwater flow system. (author)

Characterization of indigenous chicken production systems in Rwanda.

Science.gov (United States)

Mahoro, J; Muasya, T K; Mbuza, F; Habimana, R; Kahi, A K

2017-12-01

Characterization of indigenous chicken (IC) production systems in Rwanda was conducted from November 2015 to January 2016 with the aim of understanding socio-economic characteristics, management of IC, production parameters, feed resources, and constraints faced by farmers rearing IC. A survey involving 206 households was carried out in 5 districts with the highest populations of IC using structured questionnaires. Data were analyzed using SAS software. The results showed that the majority of respondents (62.4%) were males and 37.6% were females. The majority of respondents (83.6%) had formal education. All family members were involved in the chicken husbandry practices. However, women (78%) were highly responsible for IC management activities. The family size averaged 5 persons (ranging 2 to 13) per household. Land was privately owned by farmers (84%) with a mean holding of 0.87 ha per household. The production system was mainly extensive with minimum provision of supplementary feeds. Chickens were being housed in separate houses at night and mating was uncontrolled. Breeding and replacement stocks were mainly sourced from the hatching of eggs using broody hens (60.68% of respondents). There were no vaccination programs, and ecto- and endo-parasites control was done when need arose. Egg production, income generation, meat production, and production of breeding stock were the main reasons of keeping IC. The first 3 main challenges facing IC production were diseases outbreaks, lack of investment capital, and predators. Others challenges, such as feed shortage, thieves, fluctuation of market price, lack of information on poultry rearing, and lack of chicken houses, also were mentioned. The IC production constraints mentioned need urgent mitigation measures to sustain utilization of IC against the changing climatic and economic conditions. Therefore, individual, public institution, and non-governmental organization efforts are required to develop sustainable breeding

Evaluating the Effects of Farming Systems on Potato Production Factors Productivity; a Case Study in Kordesatan and Hamedan

Directory of Open Access Journals (Sweden)

nasibeh zarei

2016-02-01

Full Text Available In the current study, the effects of farming systems on potato production factors productivity were investigated in the 2011-2012. The data were collected using two stages cluster sampling and preparing 208 questionnaires submitted to farmers in the Koredestan and Hamedan Provinces. The efficacy of farming systems computed using dummy variable, and to select the best produce function, flexible and non-flexible functions were studied. Results indicated that production function Cobb-Douglas is better than the other tested functions. In addition, the effect of ownership farming system on production factors productivity was positive while the effect of other farming systems was found to be negative. Therefore, it is recommended that Ministry of Jahad-e-Agriculture encourage farmers to buy rental land and wells over the long-term period by giving low interest loans.

Architecture Descriptions. A Contribution to Modeling of Production System Architecture

DEFF Research Database (Denmark)

Jepsen, Allan Dam; Hvam, Lars

a proper understanding of the architecture phenomenon and the ability to describe it in a manner that allow the architecture to be communicated to and handled by stakeholders throughout the company. Despite the existence of several design philosophies in production system design such as Lean, that focus...... a diverse set of stakeholder domains and tools in the production system life cycle. To support such activities, a contribution is made to the identification and referencing of production system elements within architecture descriptions as part of the reference architecture framework. The contribution...

Design, product structuring and modelling of mechatronic products and systems

DEFF Research Database (Denmark)

Conrad, Finn; Sørensen, Torben

2003-01-01

Information Technology offers software and hardware for improvement of the engineering design, structuring and control systems, and industrial applications. The latest progress in IT makes integration of an overall design and manufacturing IT- concept feasible and commercially attractive. An IT......-tool concept for modelling, simulation and design of mechatronic products and systems is proposed in this paper. It built on results from a Danish mechatronic research program on intelligent motion control as well as from the Esprit project SWING on IT-tools for rapid prototyping of fluid power components...

Study on commercial HTGR hydrogen production system

International Nuclear Information System (INIS)

Nishihara, Tetsuo

2000-07-01

The Japanese energy demand in 2030 will increase up to 117% in comparison with one in 2000. We have to avoid a large consumption of fossil fuel that induces a large CO 2 emission from viewpoint of global warming. Furthermore new energy resources expected to resolve global warming have difficulty to be introduced more because of their low energy density. As a result, nuclear power still has a possibility of large introduction to meet the increasing energy demand. On the other hand, in Japan, 40% of fossil fuels in the primary energy are utilized for power generation, and the remaining are utilized as a heat source. New clean energy is required to reduce the consumption of fossil fuels and hydrogen is expected as a alternative energy resource. Prediction of potential hydrogen demand in Japan is carried out and it is clarified that the demand will potentially increase up to 4% of total primary energy in 2050. In present, steam reforming method is the most economical among hydrogen generation processes and the cost of hydrogen production is about 7 to 8 yen/m 3 in Europe and the United States and about 13 yen/m 3 in Japan. JAERI has proposed for using the HTGR whose maximum core outlet temperature is at 950degC as a heat source in the steam reforming to reduced the consumption of fossil fuels and resulting CO 2 emission. Based on the survey of the production rate and the required thermal energy in conventional industry, it is clarified that a hydrogen production system by the steam reforming is the best process for the commercial HTGR nuclear heat utilization. The HTGR steam reforming system and other candidate nuclear heat utilization systems are considered from viewpoint of system layout and economy. From the results, the hydrogen production cost in the HTGR stream reforming system is expected to be about 13.5 yen/m 3 if the cost of nuclear heat of the HTGR is the same as one of the LWR. (author)