WorldWideScience

Sample records for submitting required papers

  1. 37 CFR 2.54 - Requirements for drawings submitted on paper.

    Science.gov (United States)

    2010-07-01

    ... 37 Patents, Trademarks, and Copyrights 1 2010-07-01 2010-07-01 false Requirements for drawings submitted on paper. 2.54 Section 2.54 Patents, Trademarks, and Copyrights UNITED STATES PATENT AND TRADEMARK OFFICE, DEPARTMENT OF COMMERCE RULES OF PRACTICE IN TRADEMARK CASES Drawing § 2.54 Requirements for...

  2. First paper from Tevatron Run II submitted by CDF collaboration

    CERN Multimedia

    2003-01-01

    "Scientists of the Collider Detector at Fermilab submitted today (March 19) the first scientific publication of Collider Run II to the science journal Physical Review D. The paper titled "Measurement of the Mass Difference m(Ds+)-m(D+) at CDF II" summarizes the results of an analysis carried out by CDF scientists Christoph Paus and Ivan Furic, MIT, describing the mass measurement of particles containing charm quarks" (1 page).

  3. Content Analysis of Papers Submitted to Communications in Information Literacy, 2007-2013

    Directory of Open Access Journals (Sweden)

    Christopher V. Hollister

    2014-07-01

    Full Text Available The author conducted a content analysis of papers submitted to the journal, Communications in Information Literacy, from the years 2007-2013. The purpose was to investigate and report on the overall quality characteristics of a statistically significant sample of papers submitted to a single-topic, open access, library and information science (LIS journal. Characteristics of manuscript submissions, authorship, reviewer evaluations, and editorial decisions were illuminated to provide context; particular emphasis was given to the analysis of major criticisms found in reviewer evaluations of rejected papers. Overall results were compared to previously published research. The findings suggest a trend in favor of collaborative authorship, and a possible trend toward a more practice-based literature. The findings also suggest a possible deterioration in some of the skills that are required of LIS authors relative to the preparation of scholarly papers. The author discusses potential implications for authors and the disciplinary literature, recommends directions for future research, and where possible, provides recommendations for the benefit of the greater community of LIS scholars.

  4. Findings From the INANE Survey on Student Papers Submitted to Nursing Journals.

    Science.gov (United States)

    Kennedy, Maureen Shawn; Newland, Jamesetta A; Owens, Jacqueline K

    Nursing students are often encouraged or required to submit scholarly work for consideration for publication but most manuscripts or course assignment papers do not meet journal standards and consume valuable resources from editors and peer reviewers. The International Academy of Nursing Editors (INANE) is a group of nurse editors and publishers dedicated to promoting best practices in publishing in the nursing literature. In August 2014, editors at INANE's annual meeting voiced frustrations over multiple queries, poorly written student papers, and lack of proper behavior in following through. This article describes the findings of a survey distributed to INANE members to seek feedback about submissions by students. Fifty-three (53) members responded to an online anonymous survey developed by the INANE Student Papers Work Group. Data were analyzed using descriptive statistics for Likert-type questions and content analysis of open-ended questions. Quantitative data revealed that most editors reported problems with student papers across all levels of graduate programs. Six themes emerged from the qualitative data: submissions fail to follow author guidelines; characteristics of student submissions; lack of professional behavior from students; lack of professional behavior from faculty; editor responses to student submissions; and faculty as mentors. These themes formed the basis for recommendations and strategies to improve student scholarly writing. Overall, editors endorsed supporting new scholars in the publication process but faculty engagement was integral to student success. Copyright © 2016 Elsevier Inc. All rights reserved.

  5. 17 CFR 232.311 - Documents submitted in paper under cover of Form SE.

    Science.gov (United States)

    2010-04-01

    ... section, may be filed up to six business days prior to, or on the date of filing of, the electronic format... EXCHANGE COMMISSION REGULATION S-T-GENERAL RULES AND REGULATIONS FOR ELECTRONIC FILINGS Preparation of Electronic Submissions § 232.311 Documents submitted in paper under cover of Form SE. Form SE (§§ 239.64, 249...

  6. 75 FR 81204 - Notice of Public Information Collection Requirements Submitted to OMB for Review

    Science.gov (United States)

    2010-12-27

    ... and organizational information on NGOs working in international development and humanitarian relief...; ] AGENCY FOR INTERNATIONAL DEVELOPMENT Notice of Public Information Collection Requirements Submitted to OMB for Review SUMMARY: U.S. Agency for International Development (USAID) has submitted the following...

  7. Personnel Requirements. Microcomputing Working Paper Series.

    Science.gov (United States)

    Drexel Univ., Philadelphia, PA. Microcomputing Program.

    In 1983, Drexel University became one of the first universities in the country to require all incoming students to have personal access to a microcomputer. To support this program, a considerable staff was needed to perform ongoing functions as well as numerous special-purpose, one-time-only tasks. This paper describes the positions that were…

  8. Parallel Architectures for Planetary Exploration Requirements (PAPER)

    Science.gov (United States)

    Cezzar, Ruknet; Sen, Ranjan K.

    1989-01-01

    The Parallel Architectures for Planetary Exploration Requirements (PAPER) project is essentially research oriented towards technology insertion issues for NASA's unmanned planetary probes. It was initiated to complement and augment the long-term efforts for space exploration with particular reference to NASA/LaRC's (NASA Langley Research Center) research needs for planetary exploration missions of the mid and late 1990s. The requirements for space missions as given in the somewhat dated Advanced Information Processing Systems (AIPS) requirements document are contrasted with the new requirements from JPL/Caltech involving sensor data capture and scene analysis. It is shown that more stringent requirements have arisen as a result of technological advancements. Two possible architectures, the AIPS Proof of Concept (POC) configuration and the MAX Fault-tolerant dataflow multiprocessor, were evaluated. The main observation was that the AIPS design is biased towards fault tolerance and may not be an ideal architecture for planetary and deep space probes due to high cost and complexity. The MAX concepts appears to be a promising candidate, except that more detailed information is required. The feasibility for adding neural computation capability to this architecture needs to be studied. Key impact issues for architectural design of computing systems meant for planetary missions were also identified.

  9. 20 CFR 703.203 - Application for security deposit determination; information to be submitted; other requirements.

    Science.gov (United States)

    2010-04-01

    ... determination; information to be submitted; other requirements. 703.203 Section 703.203 Employees' Benefits... AND RELATED STATUTES INSURANCE REGULATIONS Insurance Carrier Security Deposit Requirements § 703.203 Application for security deposit determination; information to be submitted; other requirements. (a) Each...

  10. How to Select a Journal to Submit and Publish Your Biomedical Paper?

    Directory of Open Access Journals (Sweden)

    Farhad Shokraneh

    2012-03-01

    Full Text Available Introduction: selection of journal for publication purpose is one of concerns of biomedical researchers. They apply various criteria to choose appropriate journal. Here, we have tried to collect main criteria biomedical researchers use to select a journal to submit their work. Methods: we collected these criteria through focus group conversations with researchers during our careers, feedbacks from participants of our scientific writing workshops and non-systematic reviewing of some related literature. Results: we have presented a summative and informative guidance in selection of biomedical journals for biomedical paper submission and publication. Conclusion: Categorized criteria as a mnemonic tool for authors may help the authors in journal selection process.

  11. White Paper on Institutional Capability Computing Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Kissel, L; McCoy, M G; Seager, M K

    2002-01-29

    This paper documents the need for a rapid, order-of-magnitude increase in the computing infrastructure provided to scientists working in the unclassified domains at Lawrence Livermore National Laboratory. This proposed increase could be viewed as a step in a broader strategy linking hardware evolution to applications development that would take LLNL unclassified computational science to a position of distinction, if not preeminence, by 2006. We believe that it is possible for LLNL institutional scientists to gain access late this year to a new system with a capacity roughly 80% to 200% that of the 12-TF/s (twelve trillion floating-point operations per second) ASCI White system for a cost that is an order of magnitude lower than the White system. This platform could be used for first-class science-of-scale computing and for the development of aggressive, strategically chosen applications that can challenge the near PF/s (petaflop/s, a thousand trillion floating-point operations per second) scale systems ASCI is working to bring to the LLNL unclassified environment in 2005. As the distilled scientific requirements data presented in this document indicate, great computational science is being done at LLNL--the breadth of accomplishment is amazing. The computational efforts make it clear what a unique national treasure this Laboratory has become. While the projects cover a wide and varied application space, they share three elements--they represent truly great science, they have broad impact on the Laboratory's major technical programs, and they depend critically on big computers.

  12. 77 FR 74019 - Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB...

    Science.gov (United States)

    2012-12-12

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB); Correction AGENCY: Centers for Medicare & Medicaid...

  13. 75 FR 9877 - Public Information Collection Requirement Submitted to Office of Management and Budget (OMB) for...

    Science.gov (United States)

    2010-03-04

    ... From the Federal Register Online via the Government Publishing Office COMMODITY FUTURES TRADING COMMISSION Public Information Collection Requirement Submitted to Office of Management and Budget (OMB) for Review AGENCY: Commodity Futures Trading Commission. ACTION: Notice of Submission of Information...

  14. 77 FR 52035 - Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB...

    Science.gov (United States)

    2012-08-28

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB); Correction AGENCY: Centers for Medicare & Medicaid...

  15. Energy requirements of the U. S. pulp and paper industry

    Energy Technology Data Exchange (ETDEWEB)

    Cosman, C.M.

    1979-01-01

    According to the American Paper Institute, the paper industry is the fifth largest consumer of purchased energy in the U.S. and the largest consumer of fuel oil. Almost one-half of its total energy consumption comes from the industry's own process wasts: spent pulping liquors, bark, and hogged wood. In 1976 non-fossil fuels provided 44.6% of the total Btu consumption, up from 41.1% in 1972 and 42.6% in 1975. (Self-generated hydro power and other electricity produced from fossil fuel supplied another 1.5% of total needs in 1972 and 2.1% in 1975.) The industry has established a mechanism for self-policing by submitting periodic reports on its energy consumption to the API. The target set by the industry is a 20% saving of purchased energy by 1980. So far a reduction of about 15% has been achieved, making adjustments for add-ons required because of environmental regulations and other changes vs the base year of 1972.

  16. 76 FR 33305 - Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB...

    Science.gov (United States)

    2011-06-08

    ... HUMAN SERVICES Centers for Medicare & Medicaid Services Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB); Correction AGENCY: Centers for Medicare & Medicaid... Requirements (45 CFR Part 154)'' that was published in the Federal Register on June 1, 2011 (76 FR 31613). FOR...

  17. 77 FR 66823 - Freedom of Information Act Request for Papers Submitted to DARPA for the 2011 100 Year Starship...

    Science.gov (United States)

    2012-11-07

    ... of the Secretary Freedom of Information Act Request for Papers Submitted to DARPA for the 2011 100... to DARPA should be withheld in response to a request received by DARPA under the Freedom of..., 2012. ADDRESSES: Send written comments concerning this Freedom of Information Act request by email to...

  18. Requirements for ethics committee review for studies submitted to Implementation Science

    Directory of Open Access Journals (Sweden)

    Mittman Brian

    2011-03-01

    Full Text Available Abstract The requirement for ethics review of studies submitted to Implementation Science has been unclear. Therefore, in this editorial, we set out our requirements for ethics committee review of experimental and non-experimental studies. For any study that meets the criteria of human subject research (which includes research on healthcare providers, irrespective of study design, we will require proof of either satisfactory ethics committee review or of the granting of an official exemption or waiver.

  19. 78 FR 4413 - Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB...

    Science.gov (United States)

    2013-01-22

    ... From the Federal Register Online via the Government Publishing Office DEPARTMENT OF HEALTH AND HUMAN SERVICES Centers for Medicare & Medicaid Services Public Information Collection Requirements Submitted to the Office of Management and Budget (OMB); Extension of Comment Period AGENCY: Centers for...

  20. 30 CFR 254.53 - Submitting a response plan developed under State requirements.

    Science.gov (United States)

    2010-07-01

    ...) Identify a qualified individual and require immediate communication between that person and appropriate... you submitted the plan to the State; (5) If the plan received formal approval, the name of the approving organization, the date of approval, and a copy of the State agency's approval letter if one was...

  1. 78 FR 12772 - Information Collection Activities: Oil and Gas Production Requirements; Submitted for Office of...

    Science.gov (United States)

    2013-02-25

    ... Requirements; Submitted for Office of Management and Budget (OMB) Review; Comment Request ACTION: 30-day Notice... Federal Oil and Gas Royalty Management Act (FOGRMA), 30 U.S.C. 1751(a), grants authority to the Secretary.... 108, we revised what read `API @ 60 F' to now read as `API @ 14.73 PSI & 60 F'; and in Block No. 109...

  2. 78 FR 14763 - Notice of Public Information Collection Requirements Submitted to OMB for Review

    Science.gov (United States)

    2013-03-07

    ...; ] AGENCY FOR INTERNATIONAL DEVELOPMENT Notice of Public Information Collection Requirements Submitted to... information collection to OMB for review and clearance under the Paperwork Reduction Act of 1995, Public Law... International Development must collect information as part of the Public-Private Partnerships Opportunity...

  3. An analysis of the titles of papers submitted to the UK REF in 2014: authors, disciplines, and stylistic details.

    Science.gov (United States)

    Hudson, John

    2016-01-01

    In 2014 over 52,000 academics submitted >155,500 journal articles in 36 different disciplines for assessment in the UK's four-year Research Evaluation Framework (the REF). In this paper the characteristics of the titles of these papers are assessed. Although these varied considerably between the disciplines, the main findings were that: (i) the lengths of the titles increased with the number of authors in almost all disciplines, (ii) the use of colons and question marks tended to decline with increasing author numbers-although there were a few disciplines, such as economics, where the reverse was evident, (iii) papers published later on in the 4-year period tended to have more authors than those published earlier, and (iv), in some disciplines, the numbers of subsequent citations to papers were higher when the titles were shorter and when they employed colons but lower when they used question marks.

  4. 25 CFR 900.9 - May the Secretary require an Indian tribe or tribal organization to submit any other information...

    Science.gov (United States)

    2010-04-01

    ... organization to submit any other information beyond that identified in § 900.8? 900.9 Section 900.9 Indians... Proposal Contents § 900.9 May the Secretary require an Indian tribe or tribal organization to submit any other information beyond that identified in § 900.8? No. ...

  5. 13 CFR 126.616 - What requirements must a joint venture satisfy to submit an offer on a HUBZone contract?

    Science.gov (United States)

    2010-01-01

    ... must a joint venture satisfy to submit an offer on a HUBZone contract? A joint venture may submit an offer on a HUBZone contract if the joint venture meets all of the following requirements: (a) HUBZone joint venture. A qualified HUBZone SBC may enter into a joint venture with another qualified HUBZone SBC...

  6. 42 CFR 137.351 - Is a Self-Governance Tribe required to submit construction project progress and financial reports...

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Is a Self-Governance Tribe required to submit..., DEPARTMENT OF HEALTH AND HUMAN SERVICES TRIBAL SELF-GOVERNANCE Construction Roles of Self-Governance Tribe in Establishing and Implementing Construction Project Agreements § 137.351 Is a Self-Governance Tribe required to...

  7. Requirements and Evaluation of tool papers for PETRI NETS

    DEFF Research Database (Denmark)

    Franceschinis, Giuliana; van Hee, Kees; Kindler, Ekkart

    2008-01-01

    This paper gives guidelines for the publication of papers on software tools, in particular for Petri net tools. The guidelines are illustrated by an example.......This paper gives guidelines for the publication of papers on software tools, in particular for Petri net tools. The guidelines are illustrated by an example....

  8. 13 CFR 127.506 - May a joint venture submit an offer on an EDWOSB or WOSB requirement?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false May a joint venture submit an offer on an EDWOSB or WOSB requirement? 127.506 Section 127.506 Business Credit and Assistance SMALL... project manager responsible for the performance of the contract; (d) The joint venture must perform the...

  9. 2005 White Paper on Institutional Capability Computing Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Carnes, B; McCoy, M; Seager, M

    2006-01-20

    This paper documents the need for a significant increase in the computing infrastructure provided to scientists working in the unclassified domains at Lawrence Livermore National Laboratory (LLNL). This need could be viewed as the next step in a broad strategy outlined in the January 2002 White Paper (UCRL-ID-147449) that bears essentially the same name as this document. Therein we wrote: 'This proposed increase could be viewed as a step in a broader strategy linking hardware evolution to applications development that would take LLNL unclassified computational science to a position of distinction if not preeminence by 2006.' This position of distinction has certainly been achieved. This paper provides a strategy for sustaining this success but will diverge from its 2002 predecessor in that it will: (1) Amplify the scientific and external success LLNL has enjoyed because of the investments made in 2002 (MCR, 11 TF) and 2004 (Thunder, 23 TF). (2) Describe in detail the nature of additional investments that are important to meet both the institutional objectives of advanced capability for breakthrough science and the scientists clearly stated request for adequate capacity and more rapid access to moderate-sized resources. (3) Put these requirements in the context of an overall strategy for simulation science and external collaboration. While our strategy for Multiprogrammatic and Institutional Computing (M&IC) has worked well, three challenges must be addressed to assure and enhance our position. The first is that while we now have over 50 important classified and unclassified simulation codes available for use by our computational scientists, we find ourselves coping with high demand for access and long queue wait times. This point was driven home in the 2005 Institutional Computing Executive Group (ICEG) 'Report Card' to the Deputy Director for Science and Technology (DDST) Office and Computation Directorate management. The second challenge is

  10. 30 CFR 250.468 - What well records am I required to submit?

    Science.gov (United States)

    2010-07-01

    ... OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... drilling operations in the GOM OCS Region, you must submit form MMS-133, Well Activity Report, to the District Manager on a weekly basis. (c) For drilling operations in the Pacific or Alaska OCS Regions, you...

  11. Water requirements of the pulp and paper industry

    Science.gov (United States)

    Mussey, Orville D.

    1955-01-01

    Water, of varied qualities, is used for several purposes in the manufacture of pulp and paper, as a vehicle for transporting the constituents of paper in the paper machines; as process water for cooking wood chips to make pulp; as a medium for heat transfer; and for washing the pulpwood, the woodpulp, and the machines that handle the pulp. About 3,200 million gallons of water was withdrawn from surface- and ground-water sources each day during 1950 for the use of the pulp and paper industry. This is about 4 percent of the total estimated industrial withdrawal of water in the Nation The paper industry in the United States has been growing at a rapid rate. It has increased about tenfold in the last 50 years and has doubled every 15 years. The 1950 production of paper was about 24 million tons, which amounts to about 85 percent of the domestic consumption. In 1950, the pulp mills of the country produced more than 14 million tons of woodpulp, which supplied about 85 percent of the demand by the paper mills and other industries. The remainder of the fiber for paper manufacture was obtained from imported woodpulp, from reclaimed wastepaper, and from other fibers including rags and straw. The nationwide paper consumption for 1955 has been estimated at 31,700,000 tons. Woodpulp is classified according to the process by which it is made. Every woodpulp has characteristics that are carried over into the many and diverse grades of paper. Groundwood pulp is manufactured by simply grinding up wood and refining the resulting product. Soda, sulfite, and sulfate pulps are manufactured by chemically breaking down the lignin that cements the cellulose of the wood together and removing, cleaning, and sometimes bleaching the resulting fibers. Some woodpulp is produced by other methods. Sulfate-pulp mills are increasing in number and in rated daily capacity and are manufacturing more than half of the present domestic production of woodpulp. Most of the newer and larger woodpulp mills

  12. Requirements Engineering for Service-Oriented Computing: A Position Paper

    NARCIS (Netherlands)

    van Eck, Pascal; Wieringa, Roelf J.; Gordijn, Jaap; Janssen, M.

    Modern XML-based technologies as well as current busi- ness trends enable a move to service-oriented computing, in which functionality previously offered by application soft- ware, is now offered by the infrastructure. We argue that this enforces a new approach to requirements engineering for

  13. Research Perspectives for Material Requirements Planning Systems. Paper No. 434.

    Science.gov (United States)

    Berry, W. L.; Whybark, D. Clay

    Material requirements planning (MRP) systems are described as management tools for planning and controlling production operations. A wide variety of industries and production organizations are credited as reporting significant operating improvements in such areas as inventory control, production scheduling, delivery performance, and production…

  14. Papers

    DEFF Research Database (Denmark)

    Thoft-Christensen, Palle

    The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen......The chapters in this Volume 7 of a series of PAPERS are based on papers published in the period 2004 - 2008 authored/co-authored by Palle Thoft-Christensen...

  15. 78 FR 7779 - Information Collection Requirement Submitted to the Office of Management and Budget (OMB) for...

    Science.gov (United States)

    2013-02-04

    ... Commission finds good cause to adopt on an emergency basis interim rules requiring each Internet Protocol... registration and certification information that they obtain, as well as the content of such information, except...

  16. 71 FR 2900 - Notice of Public Information Collection Requirements Submitted to OMB for Review

    Science.gov (United States)

    2006-01-18

    ...U.S. Agency for International Development (USAID) has submitted the following information collections to OMB for review and clearance under the Paperwork Reduction Act of 1995, Public Law 104-13. Comments regarding this information collection are best assured of having their full effect if received within 30 days of this notification. Comments should be sent via email to David-- [email protected] or fax to 202-395-7285. Copies of submission may be obtained by calling (202) 712-1365. Supplementary Information: OMB Number: OMB 0412-NEW. Form Number: N/A. Title: Minority Serving Institution Database. Type of Submission: New Information Collection. Purpose: The U.S. Agency for International Development (USAID) requests comment on its proposal to expand its existing automated Extranet database to include voluntary registration of U.S. Minority Serving Institutions (MSIs). The existing application, the Small Business Resource Database (SBRD) was placed into production at the beginning of Fiscal Year 2004. Small and Small and Disadvantaged Business interested in pursuing contracts with USAID may register with the Agency on a voluntary basis. These data are then made available via a secure Extranet conduit to Agency Program, Technical and Contact Officers worldwide. The Agency experienced a significant improvement in the amount of contracting with these entities in Fiscal Year 2004, versus USAID's performance in 2003, and in comparison to the averages for the Executive Branch of the Federal government. The Agency's performance in this regard is published at the following URL: http:// www.sba.gov/GC/goals/Goaling-Report-08-21-2005.pdf. USAID proposes to capture the voluntary registration of Minority Serving Institutions (MSIs), who may be interested in pursuing grants with USAID in furtherance of the Agency's international development initiatives. The existing SBRD application, and the Extranet conduit for disseminating these data within USAID would be utilized for this

  17. 22 CFR 1203.735-402 - Employees not required to submit statements.

    Science.gov (United States)

    2010-04-01

    ... the integrity of the Government. (b) A statement of employment and financial interests is not required... AGENCY EMPLOYEE RESPONSIBILITIES AND CONDUCT Statements of Employment and Financial Interests § 1203.735... of responsibility that the submission of a statement of employment and financial interests is not...

  18. 77 FR 44235 - Forms and Procedures for Submitting Compliance Reports: Requirements Pertaining to Reformulated...

    Science.gov (United States)

    2012-07-27

    ... sulfur, ultra-low sulfur diesel, benzene content, and the renewable fuel standard. This notice also... record or physical object requiring special storage is generated by the submitter. EPA is able to more... user may view its own reporting history and submitters may download and decrypt all reports that they...

  19. 17 CFR 230.403 - Requirements as to paper, printing, language and pagination.

    Science.gov (United States)

    2010-04-01

    ... submit instead a fair and accurate English translation of the entire foreign language document, except as...) When submitting an English summary or English translation of a foreign language document under this... may submit a copy of the unabridged foreign language document when including an English summary or...

  20. Requirements engineering paper classification and evaluation criteria: A proposal and a discussion

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Maiden, Neil; Mead, Nancy; Rolland, Colette

    In recent years, members of the steering committee of the IEEE Requirements Engineering (RE) Conference have discussed paper classification and evaluation criteria for RE papers. The immediate trigger for this discussion was our concern about differences in opinion that sometimes arise in program

  1. 17 CFR 270.8b-12 - Requirements as to paper, printing and language.

    Science.gov (United States)

    2010-04-01

    ..., printing and language. 270.8b-12 Section 270.8b-12 Commodity and Securities Exchanges SECURITIES AND... Requirements as to paper, printing and language. (a) Registration statements and reports shall be filed on good... and reports shall be in the English language. If any exhibit or other paper or document filed with a...

  2. RE@21 spotlight: most influential papers from the requirements engineering conference

    NARCIS (Netherlands)

    Glinz, Martin; Wieringa, Roelf J.

    Since 2003, an award has been presented annually at the IEEE International Requirements Engineering Conference for the Most Influential Paper presented at the conference 10 years previously. In 2013, we celebrate 21 years of the Requirements Engineering Conference, and we use this as an opportunity

  3. The nonlinear relationship between paper recycling and primary pulp requirements : modeling paper production and recycling in Europe

    NARCIS (Netherlands)

    Schenk, Niels J.; Moll, Henri C.; Potting, Josepha

    Waste paper is suitable for recycling back into paper or for incineration for energy recovery. If waste paper is used for recycling, secondary pulp replaces virgin pulp. Fiber recycling is limited, however, because of physical constraints—particularly the breakage of fiber in the recycling

  4. Versions in the lifecycle of academic papers user requirements and guidelins fo digital repositories

    CERN Multimedia

    CERN. Geneva

    2005-01-01

    An academic research paper evolves through various stages during its lifecycle, for example from early conference presentation through working paper to final published refereed journal article. Different versions can co-exist in publicly available electronic form. Finding out researchers’ attitudes towards storing, labelling and making accessible these different versions, both of their own and of their peers’ work is at the heart of the VERSIONS Project, funded by the JISC under the Digital Repositories Programme. The project addresses the issues and uncertainties relating to versions of academic papers in digital repositories. By including a user requirements study, the project will clarify the needs of researchers and other stakeholders for deposit, storage and accessibility of different versions in the lifecycle of a digital resource. In addition to looking at user needs, the project will analyse researchers’ current practice in terms of retention of author copies of their own material. This investig...

  5. Energy Efficiency Requirements in Building Codes, Energy Efficiency Policies for New Buildings. IEA Information Paper

    Energy Technology Data Exchange (ETDEWEB)

    Laustsen, Jens

    2008-03-15

    The aim of this paper is to describe and analyse current approaches to encourage energy efficiency in building codes for new buildings. Based on this analysis the paper enumerates policy recommendations for enhancing how energy efficiency is addressed in building codes and other policies for new buildings. This paper forms part of the IEA work for the G8 Gleneagles Plan of Action. These recommendations reflect the study of different policy options for increasing energy efficiency in new buildings and examination of other energy efficiency requirements in standards or building codes, such as energy efficiency requirements by major renovation or refurbishment. In many countries, energy efficiency of buildings falls under the jurisdiction of the federal states. Different standards cover different regions or climatic conditions and different types of buildings, such as residential or simple buildings, commercial buildings and more complicated high-rise buildings. There are many different building codes in the world and the intention of this paper is not to cover all codes on each level in all countries. Instead, the paper details different regions of the world and different ways of standards. In this paper we also evaluate good practices based on local traditions. This project does not seek to identify one best practice amongst the building codes and standards. Instead, different types of codes and different parts of the regulation have been illustrated together with examples on how they have been successfully addressed. To complement this discussion of efficiency standards, this study illustrates how energy efficiency can be improved through such initiatives as efficiency labelling or certification, very best practice buildings with extremely low- or no-energy consumption and other policies to raise buildings' energy efficiency beyond minimum requirements. When referring to the energy saving potentials for buildings, this study uses the analysis of recent IEA

  6. The methodological soundness of requirements engineering papers: a conceptual framework and two case studies

    NARCIS (Netherlands)

    Wieringa, Roelf J.; Heerkens, Johannes M.G.

    This paper was triggered by concerns about the methodological soundness of many RE papers. We present a conceptual framework that distinguishes design papers from research papers, and show that in this framework, what is called a research paper in RE is often a design paper. We then present and

  7. Modeling Requirements for Simulating the Effects of Extreme Acts of Terrorism: A White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Allen, M.; Hiebert-Dodd, K.; Marozas, D.; Paananen, O.; Pryor, R.J.; Reinert, R.K.

    1998-10-01

    This white paper presents the initial requirements for developing a new computer model for simulating the effects of extreme acts of terrorism in the United States. General characteristics of the model are proposed and the level of effort to prepare a complete written description of the model, prior to coding, is detailed. The model would simulate the decision processes and interactions of complex U. S. systems engaged in responding to and recovering from four types of terrorist incidents. The incident scenarios span the space of extreme acts of terrorism that have the potential to affect not only the impacted area, but also the entire nation. The model would be useful to decision-makers in assessing and analyzing the vulnerability of the nation's complex infrastructures, in prioritizing resources to reduce risk, and in planning strategies for immediate response and for subsequent recovery from terrorist incidents.

  8. Aluminum toxicity and ecological risk assessment of dried alum residual into surface water disposalA paper submitted to the Journal of Environmental Engineering and Science

    National Research Council Canada - National Science Library

    Gagnon, Graham A; Bard, Shannon M; Walsh, Margaret E; Mortula, Maruf

    2009-01-01

    This paper presented a simplified ecological risk assessment of the toxicity of alum residuals from water treatment plants to surface water that is based on the framework recommended by United States...

  9. 41 CFR 102-118.25 - Does GSA still require my agency to submit its overall transportation policies for approval?

    Science.gov (United States)

    2010-07-01

    ... Public Contracts and Property Management Federal Property Management Regulations System (Continued) FEDERAL MANAGEMENT REGULATION TRANSPORTATION 118-TRANSPORTATION PAYMENT AND AUDIT General Introduction... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Does GSA still require...

  10. Improving the quality of papers submitted to dental journals: Transcription of session for editors, associate editors, publishers and others with an interest in scientific publishing held at IADR meeting in Cape Town on Wednesday, 25 June 2014.

    Science.gov (United States)

    Eaton, Kenneth A; Giannobile, William V; Sourgen, Deborah L; Balaji, S M; Honkala, Eino; Lynch, Christopher D

    2015-08-01

    This satellite symposium was the fourth in a series for editors, publishers, reviewers and all those with an interest in scientific publishing. It was held on Wednesday 25th June 2014 at the IADR International meeting in Cape Town, South Africa. The symposium attracted more than 180 attendees. This symposium placed an emphasis on how the quality of papers submitted to dental journals could be improved. The panel included representation from editors, researchers and publishers from North America, India and the Gulf States. The symposium identified a number of challenges for editors and publishers, including the poor quality of many papers submitted to dental and other scientific journals, plagiarism, attempted duplicate publication and sometimes fraudulent results. Where possible speakers are identified by name. A subsequent symposium was held during the IADR meeting in Boston on March 11th 2015. Involvement open to editors, associate editors, publishers and others with an interest in scientific publishing. Copyright © 2015. Published by Elsevier Ltd.. All rights reserved.

  11. 48 CFR 11.303 - Special requirements for printing and writing paper.

    Science.gov (United States)

    2010-10-01

    ... ACQUISITION REGULATION ACQUISITION PLANNING DESCRIBING AGENCY NEEDS Acceptable Material 11.303 Special... material is not reasonably available, does not meet reasonable performance requirements, or is only... 48 Federal Acquisition Regulations System 1 2010-10-01 2010-10-01 false Special requirements for...

  12. 30 CFR 285.607 - How do I submit my SAP?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit my SAP? 285.607 Section 285.607... Assessment Plan and Information Requirements for Commercial Leases § 285.607 How do I submit my SAP? You must submit one paper copy and one electronic version of your SAP to MMS at the address listed in § 285.110(a). ...

  13. CCIR paper on the radiocommunications requirements for systems to search for extraterrestrial life

    Science.gov (United States)

    Nightingale, D.

    1978-01-01

    The allocation and propagation of radio frequency bands to be used in the search for extraterrestrial intelligence is considered. Topics discussed include: propagation factors; preferred frequency bands; system characteristics and requirements; and interference.

  14. Concept Paper : Defining wetland water requirements and evaporative rates relative to the Lahontan Valley

    Data.gov (United States)

    US Fish and Wildlife Service, Department of the Interior — The calculations in this report are to determine average surface water requirements are for planning purposes and are not intended to represent actual Lahontan...

  15. 17 CFR 240.12b-12 - Requirements as to paper, printing and language.

    Science.gov (United States)

    2010-04-01

    ..., printing and language. 240.12b-12 Section 240.12b-12 Commodity and Securities Exchanges SECURITIES AND... paper, printing and language. (a) Statements and reports shall be filed on good quality, unglazed white... at least 2 points. (d)(1) All Exchange Act filings and submissions must be in the English language...

  16. 20 CFR 1002.115 - Is the employee required to report to or submit a timely application for reemployment to his or...

    Science.gov (United States)

    2010-04-01

    ... submit a timely application for reemployment to his or her pre-service employer upon completing the... reemployment to his or her pre-service employer upon completing the period of service in the uniformed services... employer of his or her intent to return to the employment position by either reporting to work or...

  17. Scientific Opinion on a technical file submitted by the US Authorities to support a request to list a new option among the EU import requirements for wood of Agrilus planipennis host plants

    DEFF Research Database (Denmark)

    Baker, R.; Candresse, T.; Dormannsné Simon, E.

    2011-01-01

    at 60 °C for 60 min to eliminate possible infestations of the wood by the emerald ash borer (EAB). The experiments leading the US Authorities to propose this option are presented in a scientific peer reviewed publication, Myers et al. (2009). The analysis of the aggregated data published by Myers et al......This document presents the scientific opinion of the Panel on Plant Health on the technical file submitted by the US Authorities to support a request to list a new option among the EU import requirements for wood of Agrilus planipennis host plants. The option under consideration is a heat treatment...... the proposed heat treatment of 60 °C/60 min with a low uncertainty, and that the alternative option proposed in the technical file submitted by the US Authorities for wood does not guarantee the wood to be free of A. planipennis....

  18. Move Sequences in Graduate Research Paper Introductions and Conclusions

    Science.gov (United States)

    Madrunio, Marilu Rañosa

    2012-01-01

    Graduate students submit academic papers at the end of the term as part of their coursework. Such papers contain introduction moves which may be troublesome and conclusion moves which may contain sub-moves not really required. This paper is aimed at assessing what particular moves are employed in the introduction and conclusion sections of 21…

  19. A Checklist for Submitting Your Risk Management Plan (RMP)

    Science.gov (United States)

    Important information about 2014 submissions and a checklist to consider in preparing and resubmitting a 5-year update, as required by 40 CFR part 68. Use the RMP*eSubmit software application, which replaced RMP*Submit.

  20. Writing a Research Paper

    Science.gov (United States)

    Mikk, Jaan

    2006-01-01

    The value of research and the career of a university lecturer depend heavily on the success in publishing scientific papers. This article reviews the guidelines for writing and submitting research papers. The three most important success criteria in publishing are as follows: the paper describes a good research, it is written according to the…

  1. Requerimientos establecidos por las normas ISO para papeles permanentes Established requirements for ISO standards for permanent papers

    Directory of Open Access Journals (Sweden)

    Juan Facundo Araujo

    2011-06-01

    Full Text Available El patrimonio documental nacional e internacional se encuentra en su gran mayoría en soporte papel. A partir de la industrialización en la manufactura de dicho material se ha producido papel con niveles de acidez, que sumado a otros factores, ha sido causante del deterioro de este tipo de patrimonio documental. En las últimas décadas, con la incorporación de nuevos procesos dentro de la producción papelera se ha resuelto en parte dicha problemática. El organismo internacional de normalización ISO ha redactado dos normas al respecto: la norma ISO 9706 e ISO 11108. Con la difusión y recomendación de uso del papel permanente para la conservación del patrimonio documental a largo plazo, se hace imprescindible conocer dicha normativa e informarse al respecto. En el presente artículo se describen las variables en la fabricación del papel que influyen en la permanencia de los papeles. También se determinan los conceptos y antecedentes que rodean ambas normas ISO, así como las características principales y partes que componen las mismas. Como anexo se consigna un glosario con los principales términos técnicos utilizados.Most of the national and international documentary heritage are on paper. From industrialization in the manufacture of such material, paper with acidity levels has been produced which, together with other factors, has been causing the deterioration of this type of documentary heritage. In recent decades, with the incorporation of new paper production processes this problem has been partly solved. The international standards organism ISO has drafted two rules in this connection: ISO 9706 and ISO 11108. With the spread and recommendation for the use of permanent paper for preservation of documentary heritage in the long term, it is essential to know the standards and be well informed. This article describes the variables in the manufacture of paper that influence the permanence of the papers. It also identifies the

  2. Reporting standards of studies and papers on the prevention and management of foot ulcers in diabetes: required details and markers of good quality

    NARCIS (Netherlands)

    Jeffcoate, William J.; Bus, Sicco A.; Game, Frances L.; Hinchliffe, Robert J.; Price, Patricia E.; Schaper, Nicolaas C.

    2016-01-01

    The evidence base for many aspects of the management of foot ulcers in people with diabetes is weak, and good-quality research, especially relating to studies of direct relevance to routine clinical care, is needed. In this paper, we summarise the core details required in the planning and reporting

  3. The 10 basic requirements for a scientific paper reporting antioxidant, antimutagenic or anticarcinogenic potential of test substances in in vitro experiments and animal studies in vivo

    DEFF Research Database (Denmark)

    Verhagen, H.; Aruoma, O.I.; van Delft, J.H.M.

    2003-01-01

    , provided they can be justified on scientific grounds. The 10 basic requirements for a scientific paper reporting antioxidant, antimutagenic or anticarcinogenic potential of test substances in in vitro experiments and animal studies in vivo concern the following areas: (1) Hypothesis-driven study design; (2......There is increasing evidence that chemicals/test substances cannot only have adverse effects, but that there are many substances that can (also) have a beneficial effect on health. As this journal regularly publishes papers in this area and has every intention in continuing to do so in the near...... future, it has become essential that studies reported in this journal reflect an adequate level of scientific scrutiny. Therefore a set of essential characteristics of studies has been defined. These basic requirements are default properties rather than non-negotiables: deviations are possible and useful...

  4. Abstracts of Papers Submitted in 1979 for Publication,

    Science.gov (United States)

    1979-01-01

    hy: Nat iouil Science Foun- Carlsberg Ri :g,’. However, compared to most chition Grants 22971, ?6842, 0� MORBs from other oce.ins they hay’ low...transi- observed at the receivers located north and tions from highs to lows along fault scarps south of the Kane Fracture Zone fall within with...amplitudes of 90-140m and wave-lengths the range of those typically observed for of 24-30 km. All fault scarps reflect sim- normal oceanic crust (there is

  5. Abstracts of Papers Submitted in 1978 for Publication,

    Science.gov (United States)

    1978-01-01

    clinopyroxene and plagio - Su Grported by: 28365randon, 2nd clase from the more basic Site 214 liquids. However, the contents of Ti, K, Zr and light- REE...by early formation of a Ti- phases to fractionated liquids with plagio - rich biotite as rims on olivine. Thus, py- clase plus clinopyroxene as major...consisting mainly of plagio - sis on petrologic and geochemical data. Three clase pyroxene, and magnetite, with quartz holes were drilled on the west

  6. Abstracts of Papers Submitted in 1975 for Publication,

    Science.gov (United States)

    1975-01-01

    oxic surface waters, is strongly restricted by the thermohaline stratification of the lake. Published in: Limnology and Oceanography. 1975. Supported...TRANSFER REACTIONS Craig D. Taylor. Collaborator: Ralph S. Wolfe Coenzyme M (CoM) is a recently discovered cofactor which is involved in the methyl...recognized by Allan, Phillips * and others, have been fully mapped, and a further transverse lineation has been discovered . Using three-dimensional

  7. 21 CFR 803.13 - Do I need to submit reports in English?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Do I need to submit reports in English? 803.13... in English? (a) Yes. You must submit all written or electronic equivalent reports required by this part in English. (b) If you submit any reports required by this part in an electronic medium, that...

  8. Reporting standards of studies and papers on the prevention and management of foot ulcers in diabetes: required details and markers of good quality.

    Science.gov (United States)

    Jeffcoate, William J; Bus, Sicco A; Game, Frances L; Hinchliffe, Robert J; Price, Patricia E; Schaper, Nicolaas C

    2016-09-01

    The evidence base for many aspects of the management of foot ulcers in people with diabetes is weak, and good-quality research, especially relating to studies of direct relevance to routine clinical care, is needed. In this paper, we summarise the core details required in the planning and reporting of intervention studies in the prevention and management of diabetic foot ulcers, including studies that focus on off-loading, stimulation of wound healing, peripheral artery disease, and infection. We highlight aspects of trial design, conduct, and reporting that should be taken into account to minimise bias and improve quality. We also provide a 21-point checklist for researchers and for readers who assess the quality of published work. Copyright © 2016 Elsevier Ltd. All rights reserved.

  9. 21 CFR 803.40 - If I am an importer, what kinds of individual adverse event reports must I submit, when must I...

    Science.gov (United States)

    2010-04-01

    ... adverse event reports must I submit, when must I submit them, and to whom must I submit them? 803.40... (CONTINUED) MEDICAL DEVICES MEDICAL DEVICE REPORTING Importer Reporting Requirements § 803.40 If I am an importer, what kinds of individual adverse event reports must I submit, when must I submit them, and to...

  10. 40 CFR 62.14715 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false When must I submit my waste management... submit my waste management plan? You must submit the waste management plan no later than April 5, 2004. ... POLLUTANTS Federal Plan Requirements for Commercial and Industrial Solid Waste Incineration Units That...

  11. 45 CFR 149.320 - Universe of claims that must be submitted.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Universe of claims that must be submitted. 149.320 Section 149.320 Public Welfare DEPARTMENT OF HEALTH AND HUMAN SERVICES REQUIREMENTS RELATING TO HEALTH... Universe of claims that must be submitted. (a) Claims submitted for an early retiree, as defined in § 149.2...

  12. Paper electronics.

    Science.gov (United States)

    Tobjörk, Daniel; Österbacka, Ronald

    2011-05-03

    Paper is ubiquitous in everyday life and a truly low-cost substrate. The use of paper substrates could be extended even further, if electronic applications would be applied next to or below the printed graphics. However, applying electronics on paper is challenging. The paper surface is not only very rough compared to plastics, but is also porous. While this is detrimental for most electronic devices manufactured directly onto paper substrates, there are also approaches that are compatible with the rough and absorptive paper surface. In this review, recent advances and possibilities of these approaches are evaluated and the limitations of paper electronics are discussed. Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  13. Stellenbosch Papers in Linguistics: Submissions

    African Journals Online (AJOL)

    Author Guidelines. Contributors are requested to submit their manuscripts as Word documents (.doc or .docx) in the following format: Paper size: A4. Top and bottom margins: 3 cm. Left-hand side and right-hand side margins: 2.5 cm. Line spacing: single (no additional space before or after paragraphs). Font: Times New ...

  14. Torn Paper

    Science.gov (United States)

    Miller, Louis J.

    1975-01-01

    Colored construction paper was used to develop an interesting, creative experience for elementary and high school students, who learned to appreciate and to understand the torn paper innovation in art. Examples of this tearing technique are found in works by Picasso, Motherwell, Vincenti, and Matisse. (Author/RK)

  15. Elevation Certificates for Flood Prone Structures, Building Dept has required elevation certs when house falls inside flood zone - paper copies only, Published in 2010, 1:2400 (1in=200ft) scale, Effingham County Government.

    Data.gov (United States)

    NSGIC Local Govt | GIS Inventory — Elevation Certificates for Flood Prone Structures dataset current as of 2010. Building Dept has required elevation certs when house falls inside flood zone - paper...

  16. Audio Papers

    DEFF Research Database (Denmark)

    Groth, Sanne Krogh; Samson, Kristine

    2016-01-01

    of the written paper through its specific use of media, a sonic awareness of aesthetics and materiality, and creative approach towards communication. The audio paper is a performative format working together with an affective and elaborate understanding of language. It is an experiment embracing intellectual...... arguments and creative work, papers and performances, written scholarship and sonic aesthetics. For this special issue of Seismograf, the guidelines for authors and peer reviewers mainly focused on the format. Topic-wise we encouraged dealing with site-specificity and topics related to the island Amager...

  17. Mathematical papers

    CERN Document Server

    Green, George

    2005-01-01

    An almost entirely self-taught mathematical genius, George Green (1793 -1841) is best known for Green's theorem, which is used in almost all computer codes that solve partial differential equations. He also published influential essays, or papers, in the fields of hydrodynamics, electricity, and magnetism. This collection comprises his most significant works.The first paper, ""An Essay on the Application of Mathematical Analysis to the Theories of Electricity and Magnetism,"" which is also the longest and perhaps the most Important, appeared In 1828. It introduced the term potential as desig

  18. Research Paper

    African Journals Online (AJOL)

    AJTCAM

    Research Paper. THE EFFECT OF AQUEOUS EXTRACTS OF HIBISCUS SABDARIFFA (SORREL) CALYCES ON. HEAMATOLOGICAL PROFILE AND ORGAN ..... 17. Reinhold, J. G. (1953). Estimation of plasma total proteins and albumin. In. standard Methods in Clinical. Chemistry. Academic press, N.Y., pp. 88-90. 18.

  19. Historical Paper

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 23; Issue 1. Historical Paper: On Simple Gas Reactions by H Eyring and M Polanyi. Classics Volume 23 Issue 1 January 2018 pp 103-128. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/023/01/0103-0128 ...

  20. Philosophical Papers

    African Journals Online (AJOL)

    Philosophical Papers is a generalist journal of philosophy edited in the Department of Philosophy at Rhodes University. The journal appears three times a year; the November issue of every year is topic-based and guest-edited. The journal is published by Routledge (Taylor & Francis). Information regarding submissions ...

  1. Viewpoint Paper

    African Journals Online (AJOL)

    This viewpoint paper presents some findings of a participatory action research programme carried out by teacher trainers at the Lesotho ... The findings indicate that some participants had, as a result of the action research project, been able to emerge from the culture of .... enhance quality. Research Methodology. An ESD ...

  2. Panama Papers

    DEFF Research Database (Denmark)

    Harrington, Brooke

    2016-01-01

    Mossack Fonseca kept its clients largely on the right side of the law. Indeed, that’s entirely the point. This article for The Atlantic draws on my wealth management research to explain why most of what is revealed in the Panama Papers leak will not result in criminal prosecution for anyone...

  3. Research Paper

    African Journals Online (AJOL)

    determine possible protective effects that may possibly reverse the effect of ageing that occurs in vivo and in vitro. Previous studies have also reported that different aged cells have different requirement for antioxidants. In our study, we have focused on ascertaining the possible protective or remedial effect of C. vulgaris hot ...

  4. Scientific Opinion on a technical file submitted by the Japanese Authorities to support a derogation request from the EU import requirements for bonsai and topiary trees that are host plants of Anoplophora chinensis

    DEFF Research Database (Denmark)

    Baker, R.; Candresse, T.; Dormannsné Simon, E.

    2010-01-01

    Following a request from the EU Commission, the EFSA PLH Panel conducted a scientific opinion on risk analysis and supporting documents provided by APHIS/USDA in support of the request to remove the Union's plant health import requirement that citrus fruit imported into the EU be sourced from gro...

  5. 7 CFR 701.13 - Submitting requests.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 7 2010-01-01 2010-01-01 false Submitting requests. 701.13 Section 701.13 Agriculture... ADMINISTERED UNDER THIS PART § 701.13 Submitting requests. (a) Subject to the availability of funds, the Deputy Administrator shall provide for an enrollment period for submitting ECP cost-share requests. (b) Requests may be...

  6. Selected papers

    CERN Document Server

    Elgot, Calvin C

    1982-01-01

    Cal Elgot was a very serious and thoughtful researcher, who with great determi­ nation attempted to find basic explanations for certain mathematical phenomena­ as the selection of papers in this volume well illustrate. His approach was, for the most part, rather finitist and constructivist, and he was inevitably drawn to studies of the process of computation. It seems to me that his early work on decision problems relating automata and logic, starting with his thesis under Roger Lyndon and continuing with joint work with Biichi, Wright, Copi, Rutledge, Mezei, and then later with Rabin, set the stage for his attack on the theory of computation through the abstract treatment of the notion of a machine. This is also apparent in his joint work with A. Robinson reproduced here and in his joint papers with John Shepherdson. Of course in the light of subsequent work on decision problems by Biichi, Rabin, Shelah, and many, many others, the subject has been placed on a completely different plane from what it was whe...

  7. 27 CFR 73.31 - May I submit forms electronically to TTB?

    Science.gov (United States)

    2010-04-01

    ... TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.31 May I submit forms electronically to TTB? Yes; you may submit an electronic form, instead of a paper form, to satisfy any reporting...

  8. 34 CFR 35.4 - Administrative claim; evidence and information to be submitted.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Administrative claim; evidence and information to be submitted. 35.4 Section 35.4 Education Office of the Secretary, Department of Education TORT CLAIMS AGAINST...) Death. In support of a claim based on death, the claimant may be required to submit the following...

  9. World archaeoastronomy. Selected papers.

    Science.gov (United States)

    Aveni, A. F.

    Contents: 1. The boundaries of archaeoastronomy: overviews and syntheses. 2. Archaeoastronomy: the textual basis. 3. Archaeoastronomy: an interdiscipline in practice. 4. Additional abstracts submitted.

  10. 40 CFR 82.178 - Information required to be submitted.

    Science.gov (United States)

    2010-07-01

    ... technologies, wastewater treatment, treatment of hazardous waste) and the costs of such technology must also be... Pesticide Programs, Registration Division, (7505C) 1200 Pennsylvania Ave., NW., Washington, DC 20460, as...

  11. 42 CFR 102.60 - Documentation an eligible requester seeking medical benefits must submit.

    Science.gov (United States)

    2010-10-01

    ... HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation for Eligible Requesters To... must submit an itemized statement from each health care entity (e.g., clinic, hospital, doctor, or...

  12. Characterization of Paper Heterogeneity

    Science.gov (United States)

    John M. Considine

    2014-01-01

    Paper and paperboard are the most widely-used green materials in the world because they are renewable, recyclable, reusable, and compostable. Continued and expanded use of these materials and their potential use in new products requires a comprehensive understanding of the variability of their mechanical properties.

  13. Recycling of Paper and Cardboard

    DEFF Research Database (Denmark)

    Christensen, Thomas Højlund; Damgaard, Anders

    2011-01-01

    waste. Recycling of paper and cardboard production waste and postconsumer waste has a long history in the pulp and paper industry. The recycled material now makes up more than half of the raw material used in European pulp and paper industry (ERPC, 2004). This chapter describes briefly how paper...... and cardboard are produced and how waste paper is recycled in the industry. Quality requirements and use of recycled products are discussed, as are the resource and environmental issues of paper recycling....

  14. How to Submit a Proposal to ONR

    Science.gov (United States)

    2012-08-01

    Click to edit Master title style How   to  Submit  a  Proposal  to  ONR   Navy  Gold  Coast  Small  Business  Procurement...control number. 1. REPORT DATE AUG 2012 2. REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE How to Submit a Proposal to

  15. Effects of gamma irradiation on deteriorated paper

    Science.gov (United States)

    Bicchieri, Marina; Monti, Michela; Piantanida, Giovanna; Sodo, Armida

    2016-08-01

    Even though gamma radiation application, also at the minimum dosage required for disinfection, causes depolymerization and degradation of the paper substrate, recently published papers seemed, instead, to suggest that γ-rays application could be envisaged in some conditions for Cultural Heritage original documents and books. In some of the published papers, the possible application of γ-rays was evaluated mainly by using mechanical tests that scarcely reflect the chemical modifications induced in the cellulosic support. In the present article the effect of low dosage γ-irradiation on cellulosic substrates was studied and monitored applying different techniques: colorimetry, spectroscopic measurements, carbonyl content and average viscometric degree of polymerization. Two different papers were investigated, a non-sized, non-filled cotton paper, and a commercial permanent paper. To simulate a real deteriorated document, which could need γ-rays irradiation, some samples were submitted to a hydrolysis treatment. We developed a treatment based on the exposition of paper to hydrochloric acid vapors, avoiding any contact of the samples with water. This method induces a degradation similar to that observed on original documents. The samples were then irradiated with 3 kGy γ-rays at a 5258 Gy/h rate. The aforementioned analyses were performed on the samples just irradiated and after artificial ageing. All tests showed negative effects of gamma irradiation on paper. Non-irradiated paper preserves better its appearance and chemical properties both in the short term and after ageing, while the irradiated samples show appreciable color change and higher oxidation extent. Since the Istituto centrale restauro e conservazione patrimonio archivistico e librario is responsible for the choice of all restoration treatments that could be applied on library and archival materials under the protection of the Italian State (http://www.icpal.beniculturali.it/allegati/DM-7

  16. 77 FR 58102 - Federal Acquisition Regulation; Submission for OMB Review; Transportation Requirements

    Science.gov (United States)

    2012-09-19

    ... approved information collection requirement concerning Transportation Requirements. A notice was published... other forms of information technology. DATES: Submit comments on or before October 19, 2012. ADDRESSES: Submit comments identified by Information Collection 9000- 0061, Transportation Requirements, by any of...

  17. 25 CFR 1000.50 - What must a Tribe/Consortium seeking a planning grant submit in order to meet the planning phase...

    Science.gov (United States)

    2010-04-01

    ... submit in order to meet the planning phase requirements? 1000.50 Section 1000.50 Indians OFFICE OF THE... seeking a planning grant submit in order to meet the planning phase requirements? A Tribe/Consortium must... the Tribe/Consortium is free from material audit exceptions. In order to meet this requirement, a...

  18. Optical Rewritable Electronic Paper

    Science.gov (United States)

    Muravsky, Alexander; Murauski, Anatoli; Chigrinov, Vladimir; Kwok, Hoi-Sing

    We developed new principle of electronic paper that is one side (for 2D image) or double side (for stereoscopic 3D image) light printable rewritable matter with polarization dependent gray scale. It consists of one or two liquid crystal displays based on Optical Rewritable (ORW) technology, which is the development of rotation azo-dye photoalignment. Each ORW display uses bare plastic or polarizers as substrates. The conductor is not required, as the image is formed by rewritable states of azimuthal direction, which results in 2D pattern of the liquid crystal twist angle. Continuous grey image maintains proper performance even when the device is bent. Simple construction provides durability and low cost, thin substrates minimize parallax for 3D image. Fluorescent dye dopant of liquid crystal partly absorbs light in blue and re-emit in green specter range improving photopic reflection and enhancing color of the ORW e-paper.

  19. 20 CFR 405.333 - Submitting documents.

    Science.gov (United States)

    2010-04-01

    ... Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Administrative Law Judge Hearing § 405.333 Submitting documents. All documents prepared and... fullest extent practicable and delivered or mailed to the administrative law judge within the time frames...

  20. 31 CFR 103.81 - Submitting requests.

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 1 2010-07-01 2010-07-01 false Submitting requests. 103.81 Section 103.81 Money and Finance: Treasury Regulations Relating to Money and Finance FINANCIAL RECORDKEEPING... which the request is made. (b) A request filed by a corporation shall be signed by a corporate officer...

  1. Compilation of Abstracts of Dissertations, Theses, and Research Papers Submitted by Candidates for Degrees.

    Science.gov (United States)

    1979-09-30

    the uncovered personality and behavior changes . were also related to common leadership traits . Master of Science in Co-Advisors: J. W. Creighton... Tekin 0. Kiyar Lieutenant, Turkish Navy B.S.E.E., Naval Posgraduate School, 1978 Measurements of the sound radiation patterns in water from the flexural...are based upon Master of Science in Advisor: David Burt Management Administrative September 1979 Science Department 118 personal interviews with U.S

  2. Compilation of Abstracts of Dissertations, Theses, and Research Papers Submitted by Candidates for Degrees.

    Science.gov (United States)

    1979-03-01

    Sciences Department 39 IFlTHERED BALLON TRANSPORT SYSTEM: A PRCPOSAL William Frederick Graeter II Lieutenant Carmazder, Supply Corps, United States Navy...incorporated in U.S. Navy shipbuilding con- tracts in an attempt to neutralize this adverse effect of inflation upon contractors. This thesis is an examination

  3. Electrowetting on paper for electronic paper display.

    Science.gov (United States)

    Kim, Duk Young; Steckl, Andrew J

    2010-11-01

    The use of paper as a material for various device applications (such as microfluidics and energy storage) is very attractive given its flexibility, versatility, and low cost. Here we demonstrate that electrowetting (EW) devices can be readily fabricated on paper substrates. Several categories of paper have been investigated for this purpose, with the surface coating, roughness, thickness, and water uptake, among the most important properties. The critical parameter for EW devices is the water contact angle (CA) change with applied voltage. EW devices on paper exhibit characteristics very close to those of conventional EW devices on glass substrates. This includes a large CA change in oil ambient (90-95°), negligible hysteresis (∼2°), and fast switching times of ∼20 ms. These results indicate the promise of low-cost paper-based EW devices for video rate flexible e-paper on paper.

  4. Reporting of ethical review of clinical research submitted to the Journal of the American Academy of Dermatology.

    Science.gov (United States)

    Perkins, Alexis C; Choi, Joanna Mimi; Kimball, Alexa B

    2007-02-01

    In recent years there has been an increasing focus on human subject protection and on documentation of ethical review in published clinical research. The JAAD clearly states in its instructions to authors, which adhere to the guidelines set forth by the International Committee of Medical Journal Editors, "studies involving live human subjects must have been approved by the author's Institutional Review Board or its equivalent." To determine what proportion of prospective studies on human subjects submitted to the clinical trials and therapeutics section lacked mention of review by an ethics board and to determine the outcome of these manuscripts. We reviewed 150 prospective studies submitted from July 1, 2004 to January 16, 2006 to a single associate editor, who receives the majority of reports requiring ethics board review. Of 150 prospective studies, 36% (n = 54) had no mention of ethics review or consent, whereas 15% (n = 22) mentioned consent but not ethics review. Forty-two papers were returned asking for ethics information, and of these, 48% were resubmitted with confirmation of ethics review, 22% were withdrawn, 12% were never resubmitted, 12% responded that ethical review was not obtained, and 7% were clarified as exempt from review. Of the 150 papers, 45% were from US authors and 55% were from international authors. Sixty-seven percent of US papers and 35% of international papers included ethics board information (P

  5. Paper making in Japan

    OpenAIRE

    Macfarlane, Alan

    2004-01-01

    A paper making factory in Japan where the traditional mulberry paper is still made. The various stage in the pulping, floating and using of paper are shown and some of the effects of the development of paper are discussed.

  6. Position paper on mesotherapy.

    Science.gov (United States)

    Sarkar, Rashmi; Garg, Vijay Kumar; Mysore, Venkataram

    2011-01-01

    Mesotherapy is a controversial cosmetic procedure which has received publicity among the lay people, in the internet and in the media. It refers to minimally invasive techniques which consist of the use of intra- or subcutaneous injections containing liquid mixture of compounds (pharmaceutical and homeopathic medications, plant extracts, vitamins and other ingredients) to treat local medical and cosmetic conditions. This position paper has examined the available evidence and finds that acceptable scientific evidence for its effectiveness and safety is lacking. IADVL taskforce, therefore would like to state that the use of this technique remains controversial at present. Further research and well-designed controlled scientific studies are required to substantiate the claims of benefit of this mode of therapy.

  7. Position paper on mesotherapy

    Directory of Open Access Journals (Sweden)

    Rashmi Sarkar

    2011-01-01

    Full Text Available Mesotherapy is a controversial cosmetic procedure which has received publicity among the lay people, in the internet and in the media. It refers to minimally invasive techniques which consist of the use of intra- or subcutaneous injections containing liquid mixture of compounds (pharmaceutical and homeopathic medications, plant extracts, vitamins and other ingredients to treat local medical and cosmetic conditions. This position paper has examined the available evidence and finds that acceptable scientific evidence for its effectiveness and safety is lacking. IADVL taskforce, therefore would like to state that the use of this technique remains controversial at present. Further research and well-designed controlled scientific studies are required to substantiate the claims of benefit of this mode of therapy.

  8. PSRS : A web-Based Paper Submission and Reviewing system

    African Journals Online (AJOL)

    Segun Fatumo

    Conference planning, organization and administration are very tedious tasks. In most cases the conference programme committee has to convene several meetings where submitted papers (via emails in most cases) are downloaded, discussed and accepted or rejected for presentation at the conference. This paper ...

  9. Cover Letter Dear Editor, Please find enclosed a paper entitled ...

    African Journals Online (AJOL)

    Ajamein

    Dear Editor,. Please find enclosed a paper entitled ' Intrinsic Kinetics of Fischer- Tropsch Synthesis Over a. Promoted Iron Catalyst '. I am submitting to your journal to be considered for publication as a research paper in Bulletin of the Chemical Society of Ethiopia. The manuscript has not been previously published, is not ...

  10. Complex Demands on Teaching Require Innovation: Case Method & Other Techniques. Selected Papers of the International Conference on Case Method Research & Application (17th, Budapest, Hungary, July 2-5, 2000).

    Science.gov (United States)

    Klein, Hans E., Ed.

    This book presents a selection of papers from the annual, international, interdisciplinary conference of the World Association for Case Method Research & Application. Papers are categorized into six areas: (1) "Case Studies and Research" (e.g., subjectivity as a source of insight in case study research, evolution of a teaching case,…

  11. Performance of Commercial Laying Hen Submitted to Different Debeaking Methods

    Directory of Open Access Journals (Sweden)

    CH Oka

    Full Text Available ABSTRACT Among the several factors required in breeding laying hens, debeaking is a factor that interferes with batch performance and affects animal welfare. Thus, the objective of this study was to evaluate three different debeaking procedures and to verify the best technique to be used. For this, the performance of the birds, the incidence of cannibalism, and in rearing phase, the quality of the eggs were evaluated. Dekalb White birds were distributed in a completely randomized design with three treatments, T1 (infrared radiation debeaking T2 (hot blade debeaking and T3 (V debeaking.The data was submitted to Analysis of Variance and compared by Tukey’s test (95%, using statistical software R. The frequencies of mortality and cannibalism were submitted to the Chi-Square test (Software R. It was observed that mortality was lower with IR debeaking in the breeding phase. Already in the rearing phase, the mortality was similar between the debeaking techniques and the cannibalism was null. The final mean weight (g, mean weight gain (g and average daily weight gain in the rearing and egg quality variables were higher for V debeaking when compared to other techniques. It is concluded that V-debeaking provides better bird performance, resistance and shell thickness when compared to the infrared radiations and hot blade debeaking, in addition to subjecting the birds to less stress.

  12. Data quality white paper.

    Science.gov (United States)

    2008-06-01

    This paper looks at the issue of data quality within the context of transportation operations and management. The : objective of this paper is to investigate data quality measures and how they are applied in existing systems. This paper : explores th...

  13. 76 FR 76165 - Proposed Data Collections Submitted for Public Comment and Recommendations

    Science.gov (United States)

    2011-12-06

    ... HUMAN SERVICES Centers for Disease Control and Prevention Proposed Data Collections Submitted for Public... States, accounting for seven of every ten deaths and affecting the quality of life of 90 million... plan, objectives, activities, partnerships, resources, and progress. CDC plans to collect the required...

  14. 22 CFR 304.4 - Administrative claim; evidence and information to be submitted.

    Science.gov (United States)

    2010-04-01

    ... and the claimant is self-employed, documentary evidence showing the amount of earnings actually lost... any diminished earning capacity. In addition, the claimant may be required to submit to a physical or..., a written statement from his employer showing actual time lost from employment, whether he is a full...

  15. 24 CFR 17.4 - Administrative claim; evidence and information to be submitted.

    Science.gov (United States)

    2010-04-01

    ...-employed, documentary evidence showing the amount of earnings actually lost; (6) Any other evidence or... earning capacity. In addition, the claimant may be required to submit to a physical or mental examination... from his employer showing actual time lost from employment, whether he is a full- or part-time employee...

  16. 75 FR 36120 - Proposed Information Collection Request Submitted for Public Comment and Recommendations; Program...

    Science.gov (United States)

    2010-06-24

    ... abandoned or deactivated coal mines, notification by the operator; requirements). Once submitted and... Coal Mines) ACTION: Notice. SUMMARY: The Department of Labor, as part of its continuing effort to... underground or in places where there is a fire or explosion hazard. Under the Mine Act and Sec. 75.1702, coal...

  17. 21 CFR 803.20 - How do I complete and submit an individual adverse event report?

    Science.gov (United States)

    2010-04-01

    ... Requirements for Individual Adverse Event Reports § 803.20 How do I complete and submit an individual adverse... individual reports of adverse events. If you are a health professional or consumer, you may use the FDA Form...) If you are a user facility, importer, or manufacturer, you do not have to report an adverse event if...

  18. 20 CFR 429.104 - What evidence do I need to submit with my claim?

    Science.gov (United States)

    2010-04-01

    ... claim? 429.104 Section 429.104 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE CLAIMS... evidence or information: (1) A written report from your attending physician or dentist setting forth the... required to submit to a physical or mental examination by a physician employed or designated by SSA. If you...

  19. 76 FR 67201 - Information Collection Activities: Oil and Gas Production Safety Systems; Submitted for Office of...

    Science.gov (United States)

    2011-10-31

    ... Production Safety Systems; Submitted for Office of Management and Budget (OMB) Review; Comment Request ACTION... the paperwork requirements in the regulations under Subpart H, ``Oil and Gas Production Safety Systems... H, Oil and Gas Production Safety Systems. Abstract: The Outer Continental Shelf (OCS) Lands Act, as...

  20. INTRODUCTION Summary of Papers Summary of Papers

    Science.gov (United States)

    Gauthier, Serge; Abarzhi, Snezhana I.; Sreenivasan, Katepalli R.

    2010-12-01

    Turbulent mixing is the generic name for processes by which two initially distinct fluids tend towards a homogeneous substance under the action of a vigorous stirring agent. The fluids may be miscible or immiscible, their molecular diffusivities may be comparable or disparate, they may be in single phase or multiphase, and may be contained in simple or complex geometries. Moreover, the thermodynamic and fluid dynamic conditions may be different: incompressible or compressible, low or high speeds, with the dominant stirring mechanism arising from buoyancy, shear or inertial effects. Each of these circumstances has its physical characteristics and requires specific mathematical tools of investigation, but there are also some generic features. Turbulent mixing is an intellectually challenging problem in terms of the underlying physics as well as the tools needed to describe, simulate and predict it. The understanding of turbulent mixing is important since it occurs in numerous and diverse circumstances, involving elementary and idealized flows, on the one hand, and a variety of complex flows in technological applications, on the other. Mixing occurs in many contexts such as inertial confinement, magnetic fusion and non-equilibrium heat transport, material transformation under the action of high strain rates, strong shocks, explosions, blast waves, supernovae and accretion disks, stellar non-Boussinesq and magneto-convection, planetary interiors in astrophysics, mantle-lithosphere tectonics, volcanic eruptions, atmospheric and oceanographic flows in geophysics, premixed and non-premixed combustion, unsteady boundary layers, pollution transport in urban areas, as well as hypersonic and supersonic flows in aerodynamics. A deep understanding of turbulent mixing requires one to go above and beyond studies of canonical turbulence, and include walls, non-equilibrium situations, interfaces, strong and isolated vortices, combustion, and so forth. In this article we briefly

  1. CATTLE PRODUCTIVE PERFORMANCE EVALUATION CONFINED SUBMITTED IMMUNOCASTRATION

    Directory of Open Access Journals (Sweden)

    J. M. Maluf

    2016-09-01

    Full Text Available In order to evaluate the performance and carcass characteristics of cattle cross breeds ½ Aberdeen Angus x ½Nelore and Nelore confined submitted to immunocastration 218 male animals were used, feedlot, averaging 342 kg, divided into three experimental groups, T1: 117 steers ½ Angus x ½ Nelore no castrated (ANC, T2: 51 Nelore steers uncastrated (NNC and T3: 50 Nellore steers immunocastrated (NIC. The experiment lasted 144 days of confinement. The selection of animals for group formation was according to the individual weight, breed, sex condition and age. For immunocastration it wasused Bopriva® vaccine. The rating was finished according to the parameter used by the meatpacking industry ranging from 1 to 5. The experimental design was completely randomized in three groups. For the analyzes the variables studied statistics were submitted to analysis of variance (ANOVA and Tukey test both at the 5% level of significance. The results showed differences (p <0.01 at various features of productive performance and carcass between treatments. For slaughter weight, the ANC animals were higher (with 582.1 kg to Nelore, regardless of sexual condition, and the NNC were in turn heavier than the NIC, 527.4 and 503.7 respectively. Finally, it observed that the use of immunocastration in Nellore animals provided a decrease in productive performance of confined animals, but provided better finish carcass similar to crossbred (ANC.

  2. Paper on Designing Costless THz Paper Optics

    Directory of Open Access Journals (Sweden)

    A. Siemion

    2016-01-01

    Full Text Available Designing diffractive optical elements is crucial for efficient development of THz techniques. Here, we consider paper structures and we analyze their advantages and disadvantages in fast prototyping. The discussion about using material parameters like refractive index and absorption coefficient in designing diffractive optical elements is shown. We analyze the influence of phase step mismatch, of attenuation of real structure, and of nonuniform illumination on the efficiency of the structure. All these features result in worsening of the diffraction efficiency but they do not seem to have such significant influence as shadow effect introduced by fast varying zones. Diffractive elements can be designed with very good accordance with experimental results which makes them ideal for possible applications. Paper optics scan be used more for fast prototyping; nevertheless its performance can be increased by placing it inside water protecting foil.

  3. Pesticide Registration Manual: Chapter 10 - Data Compensation Requirements

    Science.gov (United States)

    This chapter provides information about data compensation requirements, procedures, and obligations when submitting an application for registration, amended registration, reregistration or registration review.

  4. Predicting Student Performance Using Online One-Minute Papers

    OpenAIRE

    Lee E. Erickson; Patricia A. Erickson

    2013-01-01

    One-minute papers are often used to encourage students to think and write briefly about their own learning, because teachers believe that metacognition and writing help students to learn. The proportion of online one-minute papers that students submit, however, has not previously been used to explain student achievement in economics. This paper shows that the completion rate is a very significant predictor of student performance after controlling for other variables already noted in the liter...

  5. Paper Pulp Panoply.

    Science.gov (United States)

    Marque, Margo E.

    1999-01-01

    Explains that creating paper-pulp bowls is designed to acquaint students with the beginning vocabulary and finger dexterity needed to sculpt clay. Describes the process of making paper-pulp bowls and identifies important vocabulary words. Provides directions for making paper bowl forms and lists the materials. (CMK)

  6. Analysis of proposed eco-design requirements for boilers and water heaters. Paper within the framwork of the ''Material Efficiency and Resource Conservation'' (MaRess) Project - Task 14

    Energy Technology Data Exchange (ETDEWEB)

    Barthel, Klaus; Franke, Moritz [Wuppertal Institute for Climate, Environment and Energy, Wuppertal (Germany)

    2009-12-15

    In 2005, the European Union released the EuP Directive focusing on ecodesign requirements for energy-using products (2005/32/EC: EU Parliament and Council of the EU 2005). This directive, also called Ecodesign Directive, is a framework directive establishing a structure in which so-called implementing measures define specific requirements for placing products on the market and/or putting them into service within the internal European market. These requirements can be environmental performance standards (e.g. minimum energy efficiency or emission standards) and labelling or information requirements. Some existing European directives are already declared as being implementing measures of the Ecodesign Directive. Additionally, new implementing measures have been and will further be developed. Product-specific preparatory studies on behalf of the European Commission provide the basis for this. The preparatory studies for boilers (Lot 1) and water heaters (Lot 2) have been conducted from February 2006 to October 2007 by Van Holsteijn en Kemna (VHK). Based on the preparatory studies, the EU Commission has released several working documents (WD) on possible ecodesign requirements for boilers and water heaters at the beginning of 2008. Following these documents, boilers and water heaters comprise gas-fired, oil-fired and electric central heating (CH) (combi-) boilers / dedicated water heaters in combination with capturing solar thermal energy or ambient heat1. The requirements contain basically energy labelling measures, minimum efficiency performance standards and limits on NOx emissions. An ''Ecoboiler Model'' resp. an ''Eco Hot Water Model'' has been elaborated within the preparatory studies. These models are a crucial part of the requirements and allow for calculation of the efficiencies of boilers and water heaters. Since the models have a high degree of complexity, the Federal Environment Agency (UBA) has asked Wuppertal

  7. Porous graphene paper for supercapacitor applications

    National Research Council Canada - National Science Library

    Qi Li Xinli Guo Yao Zhang Weijie Zhang Chuang Ge Li Zhao Xiaojuan Wang Hongyi Zhang Jian Chen Zengmei Wang Litao Sun

    2017-01-01

    Graphene paper shows a great promise for the electrical energy storage. However, the high stability, purity and specific surface area have become stringent requirements for supercapacitor applications...

  8. Status and Habitat Requirements of the White Sturgeon Populations in the Columbia River Downstream from McNary Dam Volume II; Supplemental Papers and Data Documentation, 1986-1992 Final Report.

    Energy Technology Data Exchange (ETDEWEB)

    Beamesderfer, Raymond C.; Nigro, Anthony A. [Oregon Dept. of Fish and Wildlife, Clackamas, OR (US)

    1995-01-01

    This is the final report for research on white sturgeon Acipenser transmontanus from 1986--92 and conducted by the National Marine Fisheries Service (NMFS), Oregon Department of Fish and Wildlife (ODFW), US Fish and Wildlife Service (USFWS), and Washington Department of Fisheries (WDF). Findings are presented as a series of papers, each detailing objectives, methods, results, and conclusions for a portion of this research. This volume includes supplemental papers which provide background information needed to support results of the primary investigations addressed in Volume 1. This study addresses measure 903(e)(1) of the Northwest Power Planning Council's 1987 Fish and Wildlife Program that calls for ''research to determine the impact of development and operation of the hydropower system on sturgeon in the Columbia River Basin.'' Study objectives correspond to those of the ''White Sturgeon Research Program Implementation Plan'' developed by BPA and approved by the Northwest Power Planning Council in 1985. Work was conducted on the Columbia River from McNary Dam to the estuary.

  9. Using Minute Papers to Determine Student Cognitive Development Levels

    Science.gov (United States)

    Vella, Lia

    2015-01-01

    Can anonymous written feedback collected during classroom assessment activities be used to assess students' cognitive development levels? After library instruction in a first-year engineering design class, students submitted minute papers that included answers to "what they are left wondering." Responses were coded into low, medium and…

  10. Handmade Paper Landscapes

    Science.gov (United States)

    Guhin, Paula

    2012-01-01

    Making paper can be good for the planet, as well as an adventure for one's students. The costs of the activity of making the pulp from recycled paper are low and it is very eco-friendly. To begin, the author showed her middle-school students several examples of handmade paper in which outdoor scenes had been developed using an additive technique.…

  11. Paper based electronics platform

    KAUST Repository

    Nassar, Joanna Mohammad

    2017-07-20

    A flexible and non-functionalized low cost paper-based electronic system platform fabricated from common paper, such as paper based sensors, and methods of producing paper based sensors, and methods of sensing using the paper based sensors are provided. A method of producing a paper based sensor can include the steps of: a) providing a conventional paper product to serve as a substrate for the sensor or as an active material for the sensor or both, the paper product not further treated or functionalized; and b) applying a sensing element to the paper substrate, the sensing element selected from the group consisting of a conductive material, the conductive material providing contacts and interconnects, sensitive material film that exhibits sensitivity to pH levels, a compressible and/or porous material disposed between a pair of opposed conductive elements, or a combination of two of more said sensing elements. The method of sensing can further include measuring, using the sensing element, a change in resistance, a change in voltage, a change in current, a change in capacitance, or a combination of any two or more thereof.

  12. Malaysia; Background Paper

    OpenAIRE

    International Monetary Fund

    1996-01-01

    This Background Paper on Malaysia examines developments and trends in the labor market since the mid-1980s. The paper describes the changes in the employment structure and the labor force. It reviews wages and productivity trends and their effects on unit labor cost. The paper highlights that Malaysia’s rapid growth, sustained since 1987, has had a major impact on the labor market. The paper outlines the major policy measures to address the labor constraints. It also analyzes Malaysia’s recen...

  13. Day of the week effect in paper submission/acceptance/rejection to/in/by peer review journals

    Science.gov (United States)

    Ausloos, Marcel; Nedic, Olgica; Dekanski, Aleksandar

    2016-08-01

    This paper aims at providing an introduction to the behavior of authors submitting a paper to a scientific journal. Dates of electronic submission of papers to the Journal of the Serbian Chemical Society have been recorded from the 1st January 2013 till the 31st December 2014, thus over 2 years. There is no Monday or Friday effect like in financial markets, but rather a Tuesday-Wednesday effect occurs: papers are more often submitted on Wednesday; however, the relative number of going to be accepted papers is larger if these are submitted on Tuesday. On the other hand, weekend days (Saturday and Sunday) are not the best days to finalize and submit manuscripts. An interpretation based on the type of submitted work ("experimental chemistry") and on the influence of (senior) coauthors is presented. A thermodynamic connection is proposed within an entropy context. A (new) entropic distance is defined in order to measure the "opaqueness" = disorder) of the submission process.

  14. Nanoindentation studies of paper

    Science.gov (United States)

    B.F. West; B.T. Hotle; J.E. Jakes; J.M. Considine; R.E. Rowlands; K.T. Turner

    2008-01-01

    Paper materials consist of a porous web of cellulose polymeric fibers held together by entanglement and fiber-to-fiber bonding. These materials usually contain lignin and hemicellulose carbohydrates remaining from the pulping process. Pulped fibers are a flattened ribbon shape on the order of 30 microns wide, 10 microns thick and from one to four mm long. Paper web...

  15. Papers in Contrastive Linguistics.

    Science.gov (United States)

    Nickel, Gerhard, Ed.

    The contrastive linguistics papers contained in this collection concern a wide variety of issues within the field -- ranging from phonology and syntax to interference and error analysis in foreign language instruction. The papers, while discussing specific topics, for example, "Equivalence, Congruence, and Deep Structure" or "Comparative Analysis…

  16. Transportation: Topic Paper E.

    Science.gov (United States)

    National Council on the Handicapped, Washington, DC.

    As one of a series of topic papers assessing federal laws and programs affecting persons with disabilities, this paper reviews the issue of transportation services. In the area of urban mass transit, four relevant pieces of legislation and public transportation accessibility regulations are cited, and cost issues are explored. Paratransit systems,…

  17. The Mock Research Paper

    Science.gov (United States)

    Clark, Carlton

    2008-01-01

    The mock research paper combines creative writing with academic writing and, in the process, breaks down that binary. This article describes a writing assignment that offers an introduction to the college research paper genre. This assignment helps students focus on crafting an argument and learning genre conventions while postponing until the…

  18. Crepe Paper Colorimetry.

    Science.gov (United States)

    Pringle, David L.; And Others

    1995-01-01

    Uses crepe paper for the introduction of spectrophotometric concepts. Dyes used in the manufacturing of the crepe paper dissolve rapidly in water to produce solutions of colors. The variety of colors provides spectra in the visible spectrum that allow students to grasp concepts of absorption and transmission. (AIM)

  19. 75 FR 32673 - Finding of Failure To Submit Section 110 State Implementation Plans for Interstate Transport for...

    Science.gov (United States)

    2010-06-09

    ... Street, Kansas City, Kansas 66101-2907, (913) 551-7606. Monica Morales, Leader, Air Quality Planning... Mariana Islands, and Guam. Michael McGown, Manager, State and Tribal Air Alaska, Idaho, Oregon, Programs.... Instead, it would require states to develop, adopt, and submit SIPs to meet the requirements of section...

  20. Paper Punch Tape

    CERN Multimedia

    Physicists coded and recorded their programs through series of holes on punch paper tape or on punched cards. It was popular in the 1970s due to its high throughput speed and low cost, paper tape was one of the original data storage methods for computers. Information was encoded in the distinct pattern of holes punched in the paper; the paper itself was oiled to facilitate being run through the reading mechanism and to prevent tears due to brittleness. Though the paper was cheap, it had low storage capacity (only a few dozen kilobytes per roll) and the machinery involved in punching the holes was quite expensive. Higher capacity alternatives, such as magnetic tape, has get developped.

  1. 40 CFR 63.807 - Reporting requirements.

    Science.gov (United States)

    2010-07-01

    ... Emission Standards for Wood Furniture Manufacturing Operations § 63.807 Reporting requirements. (a) The... months of wood furniture manufacturing operations: (1) The first report shall be submitted 30 calendar...

  2. [Buccal manifestations in patients submitted to chemotherapy].

    Science.gov (United States)

    Hespanhol, Fernando Luiz; Tinoco, Eduardo Muniz Barretto; Teixeira, Henrique Guilherme de Castro; Falabella, Márcio Eduardo Vieira; Assis, Neuza Maria de Souza Picorelli

    2010-06-01

    Several changes in the oral cavity due to chemotherapy can be observed and can lead to important systemic complications, increasing the time of the patient in hospital and the costs of the treatment as well as affect the quality of life of the patients. The aim of this study was to assess the oral manifestation in patients treated with chemotherapy according to sex, age and tumor type. Data was collected in an oncology hospital in Juiz de Fora, Minas Gerais State, from patients' records that were submitted to oncologic treatment. It was possible to verify that mucositis, associated or not to other type of lesions, was the most common lesion in both sex of all ages (15.5%). Xerostomia and other lesions, such as Candida infection and aphthous lesions, were also present. It is possible to improve the quality of life of the patient during and after anti-neoplastic therapies through a protocol of odontological assistance that includes changes of the oral environment previous to chemotherapy such as profilaxis, caries removal, treatment of periodontal and periapical lesions, oral hygiene instructions, diet orientation and laser therapy. It is very important the insertion of the dentist in the oncologic medical team for the early diagnosis of the oral manifestation and follow-up during treatment time.

  3. Paper microfluidics goes digital.

    Science.gov (United States)

    Fobel, Ryan; Kirby, Andrea E; Ng, Alphonsus H C; Farnood, Ramin R; Wheeler, Aaron R

    2014-05-01

    The first example of so-called "digital microfluidics" (DMF) implemented on paper by inkjet printing is reported. A sandwich enzyme-linked immunosorbent assay (ELISA) is demonstrated as an example of a complex, multistep protocol that would be difficult to achieve with capillary-driven paper microfluidics. Furthermore, it is shown that paper-based DMF devices have comparable performance to traditional photolithographically patterned DMF devices at a fraction of the cost. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Distribution System White Papers

    Science.gov (United States)

    EPA worked with stakeholders and developed a series of white papers on distribution system issues ranked of potentially significant public health concern (see list below) to serve as background material for EPA, expert and stakeholder discussions.

  5. Link to paper

    Data.gov (United States)

    U.S. Environmental Protection Agency — Link to the paper. This dataset is associated with the following publication: Naile, J., A.W. Garrison, J. Avants, and J. Washington. Isomers/enantiomers of...

  6. Introduction | Voice | Philosophical Papers

    African Journals Online (AJOL)

    Philosophical Papers. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 35, No 3 (2006) >. Log in or Register to get access to full text downloads.

  7. Introduction | Metz | Philosophical Papers

    African Journals Online (AJOL)

    Philosophical Papers. Journal Home · ABOUT THIS JOURNAL · Advanced Search · Current Issue · Archives · Journal Home > Vol 34, No 3 (2005) >. Log in or Register to get access to full text downloads.

  8. Abstracts of contributed papers

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This volume contains 571 abstracts of contributed papers to be presented during the Twelfth US National Congress of Applied Mechanics. Abstracts are arranged in the order in which they fall in the program -- the main sessions are listed chronologically in the Table of Contents. The Author Index is in alphabetical order and lists each paper number (matching the schedule in the Final Program) with its corresponding page number in the book.

  9. Quantum interaction. Selected papers

    Energy Technology Data Exchange (ETDEWEB)

    Atmanspacher, Harald [Eidgenoessische Technische Hochschule, Zurich (Switzerland); Haven, Emmanuel [Leicester Univ. (United Kingdom). School of Management; Kitto, Kirsty [Queensland Univ. of Technology, Brisbane, QLD (Australia); Raine, Derek (ed.) [Leicester Univ. (United Kingdom). Centre for Interdisciplinary Science

    2014-07-01

    This book constitutes the refereed proceedings of the 7th International Conference on Quantum Interaction, QI 2013, held in Leicester, UK, in July 2013. The 31 papers presented in this book were carefully selected from numerous submissions. The papers cover various topics on quantum interaction and revolve around four themes: information processing/retrieval/semantic representation and logic; cognition and decision making; finance/economics and social structures and biological systems.

  10. Nanotechnology in paper electronics

    Science.gov (United States)

    Demming, Anna; Österbacka, Professor Ronald; Han, Jin-Woo, Dr

    2014-03-01

    The ability to put cutting edge technology on paper—not in words but in a working physical form—has been attracting an increasing number of researchers over the past decade. Paper has many advantages that make it attractive for flexible electronics: it is relatively environmentally benign; it is renewable; it can be recycled; it is light weight; production processes for paper are well advanced; and it is inexpensive. This special issue, with guest editors Ronald Österbacka from Åbo Akademi University in Finland and Jin-Woo Han from the NASA AMES Research Center, features some of the latest in paper electronics research, including developments towards applications in displays, sensing and alternative energy sources, as well as fundamental studies to further our understanding of how paper can be most effectively used in electronics. As Andrew Steckl and colleagues in the US point out, 'Cellulose-based paper substrates were implemented as an electronic substrate as early as 1969, with most advancement occurring in the past decade largely due to technology improvements in thin film deposition and organic materials' [1, 2]. They report a detailed comparison between paper, standard liquid crystal display rigid glass and flexible glass for hosting pentacene organic thin film transistors, and obtain promising results for future paper-based devices. As most meaningful electronic devices rely on transistors to function, transistors feature quite prominently in this special issue. Rodrigo Martins and colleagues in France and Portugal study the effect of fibre type, structure and dimension on paper-based transistors and reveal further insights into how paper properties affect device performance [3]. Qing Wan and colleagues in China bring the state of the art in transistor technology to paper substrates [4], fabricating indium-zinc-oxide (IZO)-based protonic/electronic hybrid thin film transistors on paper and showing that they can be used as artificial synapses. Like the

  11. Nigeria; Selected Issues Paper

    OpenAIRE

    International Monetary Fund

    2015-01-01

    This Selected Issues paper discusses promotion of economic transformation in Nigeria. Nigeria’s long-term potential is keyed on promoting economic transformation. This implies taking stock of initial conditions, assessing long-term financing capacity, and evaluating the policies and reforms to be implemented to meet the long term vision. The recent fall in prices has highlighted the challenging but compelling need to address remaining development challenges. This paper discusses some of these...

  12. Sri Lanka; Background Papers

    OpenAIRE

    International Monetary Fund

    1995-01-01

    This Background Paper on Sri Lanka provides information on the economic developments during 1992–95. Developments in the domestic and external sectors are discussed. The deficiencies of the official consumer price index that resulted in a substantial understatement of inflation performance in 1994 and alternative estimates of underlying inflation are described. The structural rigidities in the labor market that perpetuate high unemployment and limit job growth are also described. The paper al...

  13. 75 FR 41579 - Submitting Airline Data via the Internet

    Science.gov (United States)

    2010-07-16

    ... Transportation 14 CFR Parts 217, 234, 241, et al. Submitting Airline Data via the Internet; Final Rule #0;#0... Submitting Airline Data via the Internet AGENCY: Office of the Secretary, DOT. ACTION: Final rule. SUMMARY..., traffic, operational and consumer data reports electronically via the Internet using the comma separated...

  14. Learning Disability Documentation in Higher Education: What Are Students Submitting?

    Science.gov (United States)

    Sparks, Richard L.; Lovett, Benjamin J.

    2014-01-01

    This study examined the supporting documentation submitted by students with learning disability (LD) diagnoses. The participants were 210 students who were enrolled in a college support program for students with disabilities at a private liberal arts college. Findings showed that although most students submitted a psychoeducational evaluation,…

  15. [Discussion paper participation research].

    Science.gov (United States)

    Farin, Erik

    2012-12-01

    This contribution introduces the "Diskussionspapier Teilhabeforschung" (discussion paper participation research) of the German Association for Rehabilitation (DVfR) and German Society for Rehabilitation Science (DGRW). The aim of this paper is to more clearly define current scientific research activity on the subject of participation and the significance of interdisciplinary participation research. The authors emphasise the desirability of a stronger scientific basis for instruments designed to improve the participation of disabled individuals. The paper is meant to be understood as an initial basis for the discussion about participation research development, and the authors are open to suggestions and elaboration.Participation research is understood in this discussion paper as an interdisciplinary research field with 7 goals and characteristics: 1. focussing on participation and self-determination; 2. contextual approach (taking environmental and personal factors into consideration that affect participation); 3. the participation of disabled persons in participation research; 4. interdisciplinary cooperation; 5. involving organisations and institutions whose approaches to participation research overlap; 6. referring to social and healthcare policies; 7. national and international orientations.The authors discuss the rationale behind increasing the support for participation research and theoretical models thereof. Fundamental concepts with high relevance to participation research include the biopsychosocial model of the International Classification of Functionality, Disability and Health (ICF), the inclusion concept, empowerment concept, and capabilities concept. The authors conclude their paper with recommendations for strengthening the research funding for participation research, and specify concrete steps toward greater participation research. © Georg Thieme Verlag KG Stuttgart · New York.

  16. EDITORIAL: MST Best Paper Award for 2004

    Science.gov (United States)

    Gill, Patrick

    2005-12-01

    For the last 13 years, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of the journal believes that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. An Editorial Board working party, comprising Patrick Gill (Chairman), David Birch and Ralph Tatam undertook the task of selecting as Best Paper 2004 a single contributed paper describing new and significant work, well aligned with the measurement scope of the journal, and presented in clear and rigorous form. They received a number of recommendations from the Editorial and International Advisory Board Members, and they would like to record their thanks to the Members for these recommendations, as they form an all-important first stage in the assessment process. There were responses from some five Board Members. In total, there were 16 papers nominated, plus another six from the working party. All these papers had quality ratings of 2 or higher from the referees, and note was also taken of the total electronic accesses for those papers subsequently short-listed. Review Articles, and papers that included a Board Member as an author, were automatically excluded. From the submitted nominations and working party deliberations, a short list of two papers was drawn up. The winning paper was then selected on the totality of criteria. Thus the paper recommended by the working party for the MST Best Paper Award for 2004 is: 'Adsorptive pressure-sensitive coatings on porous anodised aluminium' by Masaharu Kameda, Norikazu Tezuka, Tomohiro Hangai, Keisuke Asai, Kazuyuki Nakakita and Yutaka Amao, 15 489-500 (2004) This paper describes a novel pressure sensor based on a luminescent coating applied to a porous anodized aluminium layer, with application to the measurement of fluctuating pressures on short timescales with high spatial resolution. The research has particular application to

  17. Charring rate determination of wood pine profiles submitted to high temperatures

    OpenAIRE

    Fonseca, E.M.M.; Barreira, Luísa

    2009-01-01

    The wood material presents an increasing use for structural engineering applications in buildings and other specials engineering production. To assess safety rules, this type of elements should have sufficient mechanical resistance to guarantee the design loads. Wood is a natural material and is submitted to many constantly changing influences. The high wood vulnerability, due accidental conditions, requires rigorous thermal and mechanical assessment. The combustion and the ...

  18. Plagiarism in submitted manuscripts: incidence, characteristics and optimization of screening-case study in a major specialty medical journal.

    Science.gov (United States)

    Higgins, Janet R; Lin, Feng-Chang; Evans, James P

    2016-01-01

    Plagiarism is common and threatens the integrity of the scientific literature. However, its detection is time consuming and difficult, presenting challenges to editors and publishers who are entrusted with ensuring the integrity of published literature. In this study, the extent of plagiarism in manuscripts submitted to a major specialty medical journal was documented. We manually curated submitted manuscripts and deemed an article contained plagiarism if one sentence had 80 % of the words copied from another published paper. Commercial plagiarism detection software was utilized and its use was optimized. In 400 consecutively submitted manuscripts, 17 % of submissions contained unacceptable levels of plagiarized material with 82 % of plagiarized manuscripts submitted from countries where English was not an official language. Using the most commonly employed commercial plagiarism detection software, sensitivity and specificity were studied with regard to the generated plagiarism score. The cutoff score maximizing both sensitivity and specificity was 15 % (sensitivity 84.8 % and specificity 80.5 %). Plagiarism was a common occurrence among manuscripts submitted for publication to a major American specialty medical journal and most manuscripts with plagiarized material were submitted from countries in which English was not an official language. The use of commercial plagiarism detection software can be optimized by selecting a cutoff score that reflects desired sensitivity and specificity.

  19. EXPO 2010 RESEARCH PAPER

    African Journals Online (AJOL)

    Food Sci

    skin and stone in the fruit, moisture, mineral ash and minerals namely magnesium, iron, manganese, copper and ... masses, the skin, pulp and stone content of fruits from the three sites were significantly different (P< 0.05). ..... Food and fruit bearing forest species; Examples from Eastern Africa,. FAO Forest Paper 44/1.

  20. A SEMINAR PAPER

    African Journals Online (AJOL)

    SIRIUS

    and implication of slow pace of technology transfer and adoption in rural agriculture. Based on this major objective, the paper among other specific objectives, examines the role of extension agent in technology transfer and adoption, identify factor militating against technology transfer and adoption, unveil the implication ...

  1. Two three pages papers

    NARCIS (Netherlands)

    Apt, K.R.; Constable, R.L.; Silva, A.

    2012-01-01

    Dexter was my manager during the first 8 months or so of my one year stay at the IBM Research Center at Yorktown Heights in the mid eighties. Our interaction in terms of scientific output was very slim — it consisted of just a single paper, titled "Limits for automatic verification of finite-state

  2. The Green Paper Issue.

    Science.gov (United States)

    Bourke, Paul; And Others

    1988-01-01

    Sixteen articles discuss the implications of Australia's Green Paper, a public policy statement recommending substantial changes in the higher education system to improve access. The issues discussed include labor force development, educational equity, women's education, and the financing of higher education. (MSE)

  3. Paper relief architecture

    NARCIS (Netherlands)

    Latka, J.F.

    2014-01-01

    The article presents two contemporary projects of paper structures relief architecture designed and built by Shigeru Ban Architects and Voluntary Architect Network. Author of the article took part in design and construction process of one of the projects. The project of Yaan Nursery School, which

  4. Eleven papers in analysis

    CERN Document Server

    Shabalin, P L; Yakubenko, A A; Pokhilevich, VA; Krein, M G

    1986-01-01

    This collection of eleven papers covers a broad spectrum of topics in analysis, from the study of certain classes of analytic functions to the solvability of singular problems for differential and integral equations to computational schemes for the partial differential equations and singular integral equations.

  5. Papers in auction theory

    NARCIS (Netherlands)

    Onderstal, A.M.

    2002-01-01

    This thesis is a collection of six papers in auction theory, with several economic applications, both to real life auctions and to other economic phenomena. In the introduction to the thesis, Onderstal argues why auction theory is an important branch of economic theory, and discusses several

  6. Download the discussion papers

    International Development Research Centre (IDRC) Digital Library (Canada)

    Development, underscored in his key note speech, “cutting edge research that produces evidence on what works and what doesn't to enhance resilience to disaster and promote more effective response is urgently needed.” The Canadian Humanitarian Conference represents the first step toward that end. The papers ...

  7. Child Developmental Theorist Paper

    OpenAIRE

    Margaret L. Johnson

    2017-01-01

    Many different child developmental theories have contributed to the better understanding and development of the child. This paper researches the theories of Margaret Mahler. It first aims to develop an understanding of her background and the different elements of her theory. Then, it compares Mahler with Daniel Stern, and finally it will understand the relevance of the theory in today’s world.

  8. Brazilian Bentonite Submitted to Mild Acid Treatment Under Moderated Conditions

    Science.gov (United States)

    Andrade, C. G. Bastos; Justo, V. F.; Fermino, D. M.; Valenzuela, M. G. S.; Volzone, C.; Valenzuela-Diaz, F. R.

    The present paper presents the study of light green smectite clay, from Paraiba, Brazil, submitted to mild acid attack under moderated conditions. Usually, clays are subjected to treatment with strong inorganic acids at temperatures near the boiling point and at high acid concentrations and then, widely used as bleaching agents. The treatment occurred under bellow boiling temperature and at short times of reaction (90°C, reaction times of 1, 6, 12, 18 and 24 hours in close reactor, concentration of the aqueous solution of hydrochloric acid 1.5 M, clay/acid solution ratio of 1g/10mL). The purpose of these attacks is to reduce the concentration of impurities providing color, with minimal change in the clay minerals structure, aiming at use in products of high value such as cosmetics and polymer/clay nanocomposites. The raw clay and the attacked samples were characterized by X-ray diffraction (XRD), cation exchange capacity (CEC), stereomicroscopy, scanning electron microscopy (SEM) and energy dispersive X-ray detector (EDS).

  9. Country Paper on China.

    Science.gov (United States)

    International Bureau of Education, Geneva (Switzerland).

    China's first national science curriculum was adopted in the 1950s from the former Union of Soviet Socialist Republics (USSR). With the rapid changes in science and technology over the past 50 years, an educational change became an unavoidable requirement. This document reviews reform movements in the following areas: (1) main problems in Chinese…

  10. NANOTECHNOLOGY WHITE PAPER | Science Inventory | US ...

    Science.gov (United States)

    Nanotechnology is the science of manipulating materials at the atomic and molecular level to develop new or enhanced materials and products. In December 2004, EPA’s Science Policy Council created a cross-Agency workgroup to identify and describe the issues EPA must address to ensure protection of human health and the environment as this new technology is developed. The draft white paper on nanotechnology is the product of the workgroup. The draft white paper describes the technology, and provides a discussion of the potential environmental benefits of nanotechnology and its applications that can foster sustainable use of resources. Risk management issues and the Agency’s statutory mandates are outlined, followed by an extensive discussion of risk assessment issues. The paper identifies research needs for both environmental applications and implications of nanotechnology and concludes with recommendations on next steps for addressing science policy issues and research needs. Supplemental information is provided in a number of appendices. The Agency will use the white paper to address research needs and risk assessment issues concerning nanotechnology. The draft white paper will undergo independent expert review, which will be conducted in the February time frame. All public comments received by January 31, 2006 will be submitted to the external review panel for their consideration. Comments received beyond that time will be considered by EPA. Follo

  11. Superconductivity papers database

    CERN Document Server

    International Superconductivity Technology Center. Tokyo

    This database covers mostly the articles on superconductivity appeared after the advent (1987) of the high Tc in 20 - 50 scientific journals including review papers. In the field of organic conductors, literatures are traced back to the era of TTF-TC 1970s). It contains 1)High Tc, 2) C60 related, 3) Organic Conductors, 4) Non-Oxide Superconductors including the conventional superconductors, 5) Oxide Conductors, and 6) Theory (new field since September 1997). Total number of articles at present amounts to 39,000 (December, 1998). Although the proceedings are out of the list in principle, necessary and important papers by the organizer's view are collected even from the proceedings, since some important proceedings.

  12. Pencil and paper

    DEFF Research Database (Denmark)

    Wong, Bang; Kjærgaard, Rikke Schmidt

    2012-01-01

    Creating pictures is integral to scientific thinking. In the visualization process, putting pencil to paper is an essential act of inward reflec- tion and outward expression. It is a constructive activity that makes our thinking specific and explicit. Compared to other constructive approaches...... such as writing or verbal explanations, visual representa- tion places distinct demands on our reasoning skills by forcing us to contextualize our understanding spatially....

  13. Semantic tagging of and semantic enhancements to systematics papers: ZooKeys working examples

    NARCIS (Netherlands)

    Penev, L.; Agosti, D.; Georgiev, T.; Catapano, T.; Miller, J.; Blagoderov, V.; Roberts, D.; Smith, V.S.; Brake, I.; Ryrcroft, S.; Scott, B.; Johnson, N.F.; Morris, R.A.; Sautter, G.; Chavan, V.; Robertson, T.; Remsen, D.; Stoev, P.; Parr, C.; Knapp, S.; Kress, W.J.; Thompson, F.C.; Erwin, T.

    2010-01-01

    The concept of semantic tagging and its potential for semantic enhancements to taxonomic papers is outlined and illustrated by four exemplar papers published in the present issue of ZooKeys. The four papers were created in different ways: (i) written in Microsoft Word and submitted as non-tagged

  14. 76 FR 26802 - Application Filing Requirements

    Science.gov (United States)

    2011-05-09

    ... Office of Thrift Supervision Application Filing Requirements AGENCY: Office of Thrift Supervision (OTS... Treasury will submit the proposed information collection requirement described below to the Office of... collection. Title of Proposal: Application Filing Requirements. OMB Number: 1550-0056. Form Number: N/A...

  15. 7 CFR 28.954 - Costs of submitting samples.

    Science.gov (United States)

    2010-01-01

    ... Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing Practices), DEPARTMENT OF AGRICULTURE COMMODITY STANDARDS AND STANDARD CONTAINER... Tests § 28.954 Costs of submitting samples. The transportation of samples to a laboratory for testing...

  16. Perioperative fasting time among cancer patients submitted to gastrointestinal surgeries

    OpenAIRE

    Nayara de Castro Pereira; Ruth Natalia Teresa Turrini; Vanessa de Brito Poveda

    2017-01-01

    Abstract OBJECTIVE To identify the length of perioperative fasting among patients submitted to gastrointestinal cancer surgeries. METHOD Retrospective cohort study, developed by consulting the medical records of 128 patients submitted to gastrointestinal cancer surgeries. RESULTS The mean of total length of fasting was 107.6 hours. The total length of fasting was significantly associated with the number of symptoms presented before (p=0.000) and after the surgery (p=0.007), the length of h...

  17. How to Submit a Revision and Tips on Being a Good Peer-Reviewer

    Science.gov (United States)

    Kotsis, Sandra V.; Chung, Kevin C.

    2014-01-01

    Many instructional guides have been published on how to write scientific papers. Likewise, many published articles have focused on the reasons why submitted manuscripts are rejected. However, fewer publications have been presented to guide authors on how to address reviewers’ comments in a manuscript revision. Even fewer papers counsel authors on how to deal with a rejection decision. In this paper, we will present a literature review on the strategies to get a paper accepted, despite an initial unfavorable review. We will share our experience on addressing reviewers’ comments to get a paper accepted and published. Finally, we will discuss the process of peer-review and offer tips on how to be an effective peer-reviewer. PMID:24675196

  18. Think.Check.Submit.: the campaign helping researchers navigate the scholarly communication landscape

    Directory of Open Access Journals (Sweden)

    Helen Dobson

    2016-11-01

    Full Text Available As the number of new publishers and journals increases, so does the emergence of deceptive or ‘predatory’ publishers. Inexperienced researchers, particularly those in the developing world, are known to be vulnerable to spam e-mails inviting them to submit papers to journals with no discernible reputation. Think.Check.Submit. is a collective response to this problem from cross-industry stakeholders. The campaign provides clear and simple guidance to help researchers make informed choices about their publications. The resources can also be used by librarians responsible for developing researchers’ knowledge of the scholarly communication landscape or disseminated by industry groups working to support researchers in their publishing.

  19. Combinatorics Advances : Papers from a Conference

    CERN Document Server

    Mahmoodian, Ebadollah

    1995-01-01

    On March 28~31, 1994 (Farvardin 8~11, 1373 by Iranian calendar), the Twenty­ fifth Annual Iranian Mathematics Conference (AIMC25) was held at Sharif University of Technology in Tehran, Islamic Republic of Iran. Its sponsors in~ eluded the Iranian Mathematical Society, and the Department of Mathematical Sciences at Sharif University of Technology. Among the keynote speakers were Professor Dr. Andreas Dress and Professor Richard K. Guy. Their plenary lec~ tures on combinatorial themes were complemented by invited and contributed lectures in a Combinatorics Session. This book is a collection of refereed papers, submitted primarily by the participants after the conference. The topics covered are diverse, spanning a wide range of combinatorics and al~ lied areas in discrete mathematics. Perhaps the strength and variety of the pa~ pers here serve as the best indications that combinatorics is advancing quickly, and that the Iranian mathematics community contains very active contributors. We hope that you find the p...

  20. 40 CFR 247.10 - Paper and paper products.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 24 2010-07-01 2010-07-01 false Paper and paper products. 247.10... COMPREHENSIVE PROCUREMENT GUIDELINE FOR PRODUCTS CONTAINING RECOVERED MATERIALS Item Designations § 247.10 Paper and paper products. Paper and paper products, excluding building and construction paper grades. ...

  1. Outstanding student papers

    Science.gov (United States)

    Twelve presentations were named Outstanding Student Papers in the Space Physics and Aeronomy Section at the 1993 Fall Meeting in San Francisco.Sean Lev-Tov, who presented “Quantitative Interpretation of VLF Signatures of Lightning-Induced Electron Precipitation Events in Terms of Location and Size of Disturbed Ionosphere Regions,” earned his M.S. in Electrical Engineering in 1992 from Stanford University. He is pursuing his Ph.D. in the Electrical Engineering Department of Stanford. He received his B.S. in electrical engineering from the University of Maryland, College Park, in 1989. He is working toward his Ph.D. thesis, which consists of computer modeling of the effects of lower ionospheric disturbances caused by lightning-induced electron precipitation events on VLF radio signals.

  2. ILC Higgs White Paper

    CERN Document Server

    Asner, D.M.; Calancha, C.; Fujii, K.; Graf, N.; Haber, H.E.; Ishikawa, A.; Kanemura, S.; Kawada, S.; Kurata, M.; Miyamoto, A.; Neal, H.; Ono, H.; Potter, C.; Strube, J.; Suehara, T.; Tanabe, T.; Tian, J.; Tsumura, J.; Watanuki, S.; Weiglein, G.; Yagyu, K.; Yokoya, H.

    2013-01-01

    The ILC Higgs White Paper is a review of Higgs Boson theory and experiment at the International Linear Collider (ILC). Theory topics include the Standard Model Higgs, the two-Higgs doublet model, alternative approaches to electroweak symmetry breaking, and precision goals for Higgs boson experiments. Experimental topics include the measurement of the Higgs cross section times branching ratio for various Higgs decay modes at ILC center of mass energies of 250, 500, and 1000 GeV, and the extraction of Higgs couplings and the total Higgs width from these measurements. Luminosity scenarios based on the ILC TDR machine design are used throughout. The gamma-gamma collider option at the ILC is also discussed.

  3. From Paper to PDA

    DEFF Research Database (Denmark)

    Kanstrup, Anne Marie; Stage, Jan

    2009-01-01

    Mobile devices with small screens and minimal facilities for interaction are increasingly being used in complex human activities for accessing and processing information, while the user is moving. This paper presents a case study of the design and evaluation of a mobile system, which involved...... transformation of complex text and tables to digital format on a PDA. The application domain was an emergency medical ward, and the user group was junior registrars. We designed a PDA-based system for accessing information, focusing on the ward instruction, implemented a prototype and evaluated it for usability...... and utility. The evaluation results indicate significant problems in the interaction with the system as well as the extent to which the system is useful for junior registrars in their daily work....

  4. 77 FR 43075 - Information Collection Submitted for Review and Approval to the Office of Management and Budget

    Science.gov (United States)

    2012-07-23

    ..., as amended. Total Annual Burden: 6,000 hours. Total Annual Cost: N/A. Privacy Impact Assessment: N/A. Nature and Extent of Confidentiality: Respondents are not being asked to submit confidential information... shape, depreciation reserve) required to verify the calculation of the carrier's depreciation expenses...

  5. 42 CFR 102.51 - Documentation a smallpox vaccine recipient must submit to be deemed eligible by the Secretary.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 1 2010-10-01 2010-10-01 false Documentation a smallpox vaccine recipient must..., DEPARTMENT OF HEALTH AND HUMAN SERVICES VACCINES SMALLPOX COMPENSATION PROGRAM Required Documentation To Be Deemed Eligible § 102.51 Documentation a smallpox vaccine recipient must submit to be deemed eligible by...

  6. 76 FR 75894 - Information Collection Activities: Pipelines and Pipeline Rights-of-Way; Submitted for Office of...

    Science.gov (United States)

    2011-12-05

    ... application if using unbonded flexible pipe. 1007(a)(4)(i)(D) Provide results of third party IVA review in 40 your pipeline application if using unbonded flexible pipe. 1007(a)(4)(ii) Provide specified information... removed from service. 1007(a)(4) Submit required documentation for unbonded 150 flexible pipe. 1000-1019...

  7. 76 FR 8300 - Finding of Failure To Submit State Implementation Plan Revisions for Particulate Matter, PM-10...

    Science.gov (United States)

    2011-02-14

    ... AGENCY 40 CFR Part 52 Finding of Failure To Submit State Implementation Plan Revisions for Particulate Matter, PM-10, Maricopa County (Phoenix) PM-10 Nonattainment Area, AZ AGENCY: Environmental Protection... a state implementation plan (SIP) submittal required under the Clean Air Act (CAA or Act) for the...

  8. 30 CFR 285.615 - What other reports or notices must I submit to MMS under my approved SAP?

    Science.gov (United States)

    2010-07-01

    ... MMS under my approved SAP? 285.615 Section 285.615 Mineral Resources MINERALS MANAGEMENT SERVICE... CONTINENTAL SHELF Plans and Information Requirements Activities Under An Approved Sap § 285.615 What other reports or notices must I submit to MMS under my approved SAP? (a) You must notify MMS in writing within...

  9. 33 CFR 150.820 - When must a written report of casualty be submitted, and what must it contain?

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 2 2010-07-01 2010-07-01 false When must a written report of casualty be submitted, and what must it contain? 150.820 Section 150.820 Navigation and Navigable Waters... this section serves as the notice required under § 150.815. (d) The operator will ensure that the...

  10. Outstanding student paper awards

    Science.gov (United States)

    The Hydrology Section presented five outstanding student paper awards at the 1999 Spring Meeting in Boston, Massachusetts, last June.Maneesha Joshi presented a poster titled “Estimation of the Extent and Duration of Melt on the Greenland Ice Sheet using an Edge Detection Technique on Passive Microwave Data.” She received her B.Tech. in civil engineering from the Indian Institute of Technology, Bombay in 1991, and a M.S. in environmental engineering from State University of New York, Buffalo in 1994. Maneesha expects to complete her Ph.D. in civil engineering (remote sensing) in September 1999, under the supervision of Carolyn Merry (Department of Civil and Environmental Engineering & Geodetic Science), Ken Jezek, and John Bolzan (Byrd Polar Research Center) at the Ohio State University, Columbus, Ohio. Her thesis focuses on estimating the extent of melt, melt season, and duration, and absorbed radiation on the Greenland ice sheet from passive microwave and SAR data. Maneesha's other interests include image processing, issues related to global climate change, and photogrammetry.

  11. Classic papers in combinatorics

    CERN Document Server

    Rota, Gian-Carlo

    1987-01-01

    This volume surveys the development of combinatorics since 1930 by presenting in chronological order the fundamental results of the subject proved in over five decades of original papers by:.-T. van Aardenne-Ehrenfest.-R.L. Brooks.-N.G. de Bruijn.-G.F. Clements.-H.H. Crapo.-R.P. Dilworth.-J. Edmonds.-P.Erdös.-L.R. Ford, Jr.-D.R. Fulkerson.-D. Gale.-L. Geissinger.-I.J. Good.-R.L. Graham.-A.W. Hales.-P. Hall.-P.R. Halmos.-R.I. Jewett.-I. Kaplansky.-P.W. Kasteleyn.-G. Katona.-D.J. Kleitman.-K. Leeb.-B. Lindström.-L. Lovász.-D. Lubell.-C. St. J.A. Nash-Williams.-G. Pólya.-F.P. Ramsey.-G.C. Rota.-B.L. Rothschild.-H.J. Ryser.-C. Schensted.-M.P. Schützenberger.-R.P. Stanley.-G. Szekeres.-W.T. Tutte.-H.E. Vaughan.-H. Whitney.

  12. AFRICAN MAHOGANY SUBMITTED TO DRIP IRRIGATION AND FERTILIZATION

    Directory of Open Access Journals (Sweden)

    José Alves Júnior

    Full Text Available ABSTRACT African mahogany (Khaya ivorensis A. Chev. is a tree species that has been increasing in Brazilian commercial planting. However, the lack of water and nutrition are great obstacles for crop production. The aim of this study was to evaluate the growth of young mahogany plants submitted to drip irrigation and topdressing. The experimental design was of randomized blocks, with three repetitions in subdivided plots. Treatments consisted of drippers: 1, 2 and 3plt-1; flows: 2, 4 and 8L h-1, and a treatment without irrigation. For topdressing, subplots levels were, as follows: 1 17.5 and 25.2; 2 35.1 and 50.1; 3 52.5 and 75.0; 4 70.0 and 100.2; and 5 87.5 and 125.1 g plant-1 N and K2O, respectively, divided into five bimonthly applications, which started in the 4th month after planting. Plant height, diameter at root collar and at breast height (DBH, and stem height were evaluated. Results showed statistically significant differences (P>0.05 between irrigated and non-irrigated plants. Mean plant height ranged (from 2 to 20 months in field from 0.33 to 3.25 and 2.67m for irrigated and non-irrigated plants, respectively. Mean stem height ranged from 0.23m to 0.87 and 0.71m for irrigated and non-irrigated plants, respectively. Thus, irrigation with 1 dripper per tree and flow of 2L h-1 was able to supply mahogany water requirements in the first two years in field. Trees have not responded to N and K topdressing at the beginning of the cycle.

  13. Machine Distribution. Microcomputing Working Papers Series.

    Science.gov (United States)

    Drexel Univ., Philadelphia, PA. Microcomputing Program.

    During the academic year 1983-84, Drexel University instituted a new policy requiring all incoming students to have access to a microcomputer. The computer chosen to fulfill this requirement was the Macintosh from Apple Computer, Inc. This paper provides a brief description of the process undertaken to select the appropriate computer (i.e.,…

  14. Calcium and calcium magnesium carbonate specimens submitted as urinary tract stones.

    Science.gov (United States)

    Gault, M H; Chafe, L; Longerich, L; Mason, R A

    1993-02-01

    Of 8,129 specimens submitted as urinary stones from 6,095 patients, 67 from 15 patients were predominantly calcium carbonate or calcium magnesium carbonate (dolomite) by infrared analysis. Detailed study of 1 man and 4 women who submitted 3 or more such specimens showed that all were of aragonite calcium carbonate crystal form in 2 women and all calcite in the man. All 3 patients had a long history of nephrolithiasis preceding submission of calcium carbonate stones. There was frequent and often painful spontaneous passage of many small stones. Medullary sponge kidney was reported in 2 patients. Specimens submitted by the other 2 women included dolomite and quartz artifacts. Of the other 10 patients 4 had calcite and 1 had aragonite (possibly true stones). Five patients had artifacts with dolomite in 3 and mixed specimens in 2. True calcium carbonate kidney stones and calcium carbonate artifacts may be difficult to distinguish, and dolomite and quartz artifacts may require x-ray diffraction for clear-cut diagnosis.

  15. Papers presented at the Expert Consultation on Economic Incentives and Responsible Fisheries: Rome, 28 November-1 December, 2000

    National Research Council Canada - National Science Library

    2001-01-01

    This document contains the papers submitted by the FAO Secretariat and resource persons to the Expert Consultation on Economic Incentives and Responsible Fisheries, held in Rome form 28 Novembre to 1 December 2000...

  16. 27 CFR 73.35 - Do I need to keep paper copies of forms I submit to TTB electronically?

    Science.gov (United States)

    2010-04-01

    ... Firearms ALCOHOL AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73... unless TTB otherwise authorizes you to maintain electronic copies of these documents through a general...

  17. Ethical aspects and dilemmas of preparing, writing and publishing of the scientific papers in the biomedical journals.

    Science.gov (United States)

    Masic, Izet

    2012-09-01

    In this paper author discussed about preparing and submitting manuscripts - scientific, research, professional papers, reviews and case reports. Author described it from the Editor's perspective, and specially talked about ethical aspects of authorship, conflict of interest, copyright, plagiarism and duplicate publication from the point of view of his experiences as Editor-in-Chief of several biomedical journals and Chief of Task Force of European Federation of Medical Informatics journals and member of Task Force of European Cardiology Society journals. The scientific process relies on trust and credibility. The scientific community demands high ethical standards to conduct biomedical research and to publish scientific contents. During the last decade, disclosure of conflicts of interest (COI ), (also called competing loyalties, competing interests or dual commitments), has been considered as a key element to guarantee the credibility of the scientific process. Biases in design, analysis and interpretation of studies may arise when authors or sponsors have vested interests. Therefore, COI should be made clear to the readers to facilitate their own judgment and interpretation of their relevance and potential implications. Authors are responsible to fully disclose potential COI . In October 2009 the ICMJE proposed an electronic "uniform" format for COI disclosure. Four main areas were addressed: authors´ associations with entities that supported the submitted manuscript (indefinite time frame), associations with commercial entities with potential interest in the general area of the manuscript (time frame 36 months), financial association of their spouse and children and, finally, non-financial associations potentially relevant to the submitted manuscript. Consumers of medical scholarship expect a reliable system of disclosure in which journals and authors make disclosures appropriately and consistently. There is a stigma surrounding the reporting of COI that should

  18. 49 CFR 565.16 - Reporting requirements.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS VIN Requirements... affixing the first VIN using the identifier. Manufacturers whose unique identifier appears in the fourth section of the VIN shall also submit the three characters of the first section that constitutes a part of...

  19. On the low vibration modes observed in a sphere submitted to a tangential contact force.

    Science.gov (United States)

    De Billy, M

    2006-12-01

    In this paper we discuss the existence of translational and rotational displacements of a sphere submitted to a tangential contact force. On the basis of the Bogdanov and Skvortsov's works [A.N. Bogdanov, A.T. Skvortsov, Sov. Phys. Acoust. 38 (1992) 224-226.] the dispersion equation has been established and solved for any value of the frequency in the case of the linear approximation. The present experimental analysis confirms that it exists two branches: an upper branch associated to the translation of the sphere and a lower branch characteristic of the rotation of the bead.

  20. Wood and Paper Manufacturing Sectors

    Science.gov (United States)

    Find EPA regulatory information for the wood product and paper manufacturing sectors, including paper, pulp and lumber. Information includes NESHAPs and effluent guidelines for pulp and paper rulemaking, and compliance guidelines

  1. The Friction between Paper Surfaces

    OpenAIRE

    Garoff, Niklas

    2002-01-01

    The main objective for the work described in this PhD thesiswas to formulate a friction model to characterize thefrictional behavior of paper. More specifically, the modelshould explain a phenomenon that is typical for paper grades,viz.: that the level of paper-to-paper friction is dependent onthe direction and the number of previous slides. The modelshould also explain the lubricating effect oflow-molecular-mass lipophilic compounds (LLC) that occur inpaper on paper-to-paper friction. Furthe...

  2. Science Based Governance? EU Food Regulation Submitted to Risk Analysis

    NARCIS (Netherlands)

    Szajkowska, A.; Meulen, van der B.M.J.

    2014-01-01

    Anna Szajkowska and Bernd van der Meulen analyse in their contribution, Science Based Governance? EU Food Regulation Submitted to Risk Analysis, the scope of application of risk analysis and the precautionary principle in EU food safety regulation. To what extent does this technocratic,

  3. 15 CFR 711.5 - Numerical precision of submitted data.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 2 2010-01-01 2010-01-01 false Numerical precision of submitted data. 711.5 Section 711.5 Commerce and Foreign Trade Regulations Relating to Commerce and Foreign Trade (Continued) BUREAU OF INDUSTRY AND SECURITY, DEPARTMENT OF COMMERCE CHEMICAL WEAPONS CONVENTION REGULATIONS...

  4. Teaching undergraduates how to write and submit a research manuscript.

    Science.gov (United States)

    Smith, Linda S

    2004-01-01

    Undergraduate nursing students have long been excluded from performing original theory-based nursing research due to severe time and work constraints. However, without actual research opportunities, students also lack research-writing experiences. This author describes successful strategies for teaching an undergraduate class how to write and submit a manuscript that describes an original research project.

  5. 42 CFR 83.8 - How is a petition submitted?

    Science.gov (United States)

    2010-10-01

    ... HEALTH RESEARCH AND RELATED ACTIVITIES PROCEDURES FOR DESIGNATING CLASSES OF EMPLOYEES AS MEMBERS OF THE... Procedures for Adding Classes of Employees to the Cohort § 83.8 How is a petition submitted? The petitioner(s... NIOSH through direct request (1-800-35-NIOSH) or on the Internet at www.cdc.gov/niosh/ocas. ...

  6. 40 CFR 63.4120 - What reports must I submit?

    Science.gov (United States)

    2010-07-01

    ... organic HAP in waste materials according to § 63.4151(e)(4). You do not need to submit background data... § 63.4151 and, if applicable, the calculation used to determine the mass of organic HAP in waste... CPMS was inoperative, except for zero (low-level) and high-level checks. (7) The date, time, and...

  7. 40 CFR 63.4520 - What reports must I submit?

    Science.gov (United States)

    2010-07-01

    ... waste materials according to § 63.4551(e)(4). You do not need to submit background data supporting these... of § 63.4551; and, if applicable, the calculation used to determine mass of organic HAP in waste... each CPMS was inoperative, except for zero (low-level) and high-level checks. (vii) The date, time, and...

  8. 40 CFR 63.3920 - What reports must I submit?

    Science.gov (United States)

    2010-07-01

    ... waste materials according to § 63.3951(e)(4). You do not need to submit background data supporting these... of § 63.3951; and, if applicable, the calculation used to determine mass of organic HAP in waste... each CPMS was inoperative, except for zero (low-level) and high-level checks. (vii) The date, time, and...

  9. 40 CFR 63.4720 - What reports must I submit?

    Science.gov (United States)

    2010-07-01

    ... HAP in waste materials according to § 63.4751(e)(4). You do not need to submit background data... applicable, the calculation used to determine mass of organic HAP in waste materials according to § 63.4751(e... inoperative, except for zero (low-level) and high-level checks. (vii) The date, time, and duration that each...

  10. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements

    Energy Technology Data Exchange (ETDEWEB)

    2013-03-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  11. 22 CFR 1203.735-401 - Employees required to submit statements.

    Science.gov (United States)

    2010-04-01

    ... Planning Staff; Inspector General; Director, FSI; Special Assistant to Secretary; Deputy Secretary, Under... General Counsel, or Attorney (occupational code 905, or FAS code 512). AID (1) AID/W: Deputy Assistant... (0505); Accounting Series (0510); Budget Administration Series (0560); General Attorney Series (0905...

  12. 75 FR 81269 - Public Information Collection Requirement Submitted to OMB for Review and Approval, Comments...

    Science.gov (United States)

    2010-12-27

    ... rules applicable to digital Class A TV stations (``Class A''). The Commission addresses important issues... establishes rules and policies for digital low power television (``LPTV'') and television translator (``TV translator'') stations and modifies certain rules applicable to digital Class A TV stations (``Class A...

  13. 40 CFR 710.39 - How do I submit the required information?

    Science.gov (United States)

    2010-07-01

    ... SUBSTANCES CONTROL ACT TSCA CHEMICAL INVENTORY REGULATIONS 2002 Inventory Update Reporting § 710.39 How do I... at the following address: OPPT Document Control Officer, Mail Code 7407M, ATTN: Inventory Update Rule... Partial Updating of the TSCA Chemical Inventory Data Base,” via the Internet or the TSCA Hotline. (c...

  14. 30 CFR 250.469 - What other well records could I be required to submit?

    Science.gov (United States)

    2010-07-01

    ... OFFSHORE OIL AND GAS AND SULPHUR OPERATIONS IN THE OUTER CONTINENTAL SHELF Oil and Gas Drilling Operations... reports identifying microscopic fossils by depth and/or washed samples of drill cuttings that you normally... operations. Hydrogen Sulfide ...

  15. 75 FR 68356 - Notice of Public Information Collection Requirement Submitted to the Office of Management and...

    Science.gov (United States)

    2010-11-05

    ... media ownership studies, ] Consumer Valuation of Media as a Function of Local Market Structure. This... through its media ownership rules. The Consumer Survey will be used to examine the impact of local media... current satisfaction with the overall local media environment and with components such as broadcast...

  16. 19 CFR 200.735-114 - Employees required to submit statements.

    Science.gov (United States)

    2010-04-01

    ...-114 Section 200.735-114 Customs Duties UNITED STATES INTERNATIONAL TRADE COMMISSION EMPLOYEE... such positions, shall include the listing in the chapter of the Commission's Policy Manual pertaining... research activities where the decision to be made or action to be taken could have an economic impact on...

  17. 76 FR 7145 - Notice of Public Information Collection Requirements Submitted to OMB for Review

    Science.gov (United States)

    2011-02-09

    ... purposes of this Certification-- a. ``Material support and resources'' means currency or monetary... OMB included language from USAID's December 2002 certification rather than from its September 2004 certification attached. The agency has worked with OMB to correct this error. Also, revisions were made...

  18. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Book)

    Energy Technology Data Exchange (ETDEWEB)

    2010-11-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  19. 77 FR 43373 - Emergency Clearance; Public Information Collection Requirements Submitted to the Office of...

    Science.gov (United States)

    2012-07-24

    ... participate in NSF- funded research experiences for undergraduate students. Consult With Other Agencies and... request will assure continuation of the collection of information on student participants in the Research... postsecondary students in basic and applied research in STEM. If NSF must follow the normal OIRA clearance...

  20. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Sears, Ted [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2014-06-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  1. Alternative Compliance: Guidelines for Preparing and Submitting a Waiver Request Application and Other Documentation Requirements (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-06-01

    This document is designed to assist covered fleets interested in taking advantage of more flexible compliance options and to facilitate the transition from Standard Compliance to Alternative Compliance. It is designed to help fleets better understand the Alternative Compliance option and successfully complete the waiver application process.

  2. 77 FR 38147 - Additional Requirements for Charitable Hospitals

    Science.gov (United States)

    2012-06-26

    ... applications submitted, including correcting the amount charged and seeking to reverse any ECA previously... patients who may require financial assistance--and the patient advocacy groups that assist them--will have...

  3. Required Information Release

    OpenAIRE

    Chong, Stephen N

    2010-01-01

    Many computer systems have a functional requirement to release information. Such requirements are an important part of a system’s information security requirements. Current information-flow control techniques are able to reason about permitted information flows, but not required information flows. In this paper, we introduce and explore the specification and enforcement of required information release in a language-based setting. We define semantic security conditions that express both what i...

  4. Required Information Release

    OpenAIRE

    Chong, Stephen N

    2012-01-01

    Many computer systems have a functional requirement to release information. Such requirements are an important part of a system's information security requirements. Current information-flow control techniques are able to reason about permitted information flows, but not required information flows. In this paper, we introduce and explore the specification and enforcement of required information release in a language-based setting. We define semantic security conditions that express both wha...

  5. EDITORIAL: MST Best Paper Award for 2003

    Science.gov (United States)

    Gill, Patrick

    2004-09-01

    For the last 12 years, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of the journal believes that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. An Editorial Board working party, comprising Patrick Gill (Chairman), Ralph Tatam and David Birch, was convened to determine a single contributed paper describing new and significant work, well aligned with the measurement scope of the journal, and presented in clear and rigorous form. They received a number of recommendations from the Editorial and International Advisory Board Members, and they would like to record their thanks to the Members for these recommendations, as they form an all-important first stage in the assessment process. There were responses from some 12 Board Members. In total, there were 31 papers nominated. To aid the process, additional information in the form of the 2003 MST papers top rated by referees, and the top papers ranked by most electronic accesses, was accessed. Reviews, and papers which included a Board Member as an author, were automatically excluded. From the totality of nominations and working party deliberations, there emerged a clear winner. Thus the paper recommended by the working party for the MST Best Paper Award for 2003 is: 'Extension of the torsional crystal viscometer to measurements in the time domain' by Richard F Hafer and Arno Laesecke, 14 663-673 (2003) This paper describes a significant advance in viscosity measurement using torsional vibration in piezoelectric rods. The method reported here demonstrates the use of free-decay time-domain measurements as opposed to the more established steady-state forced-mode resonance technique. The time domain technique is faster and more sensitive, with the potential for improved accuracy due to the lack of large time constants necessary for the interpretation of forced mode data. It offers

  6. Selected papers on classical analysis

    CERN Document Server

    Nomizu, Katsumi

    2001-01-01

    This volume contains papers that originally appeared in Japanese in the journal Sūgaku. Ordinarily the papers would appear in the AMS translation of that journal, but to expedite publication, the Society has chosen to publish them as a volume of selected papers. The papers here are in the general area of mathematical analysis as it pertains to free probability theory.

  7. Electronic Paper Turns the Page.

    Science.gov (United States)

    Mann, Charles C.

    2001-01-01

    Suggests that, rather than the electronic book, the technology that is most likely to transform reading and writing will be electronic paper (e-paper). Traces the evolution of e-paper from its prototype created by Xerox PARC's Nick Sheridon in 1975 to the E Ink/Lucent e-paper made from e-ink and plastic transistors. Highlights future…

  8. Paper Analogies Enhance Biology Teaching.

    Science.gov (United States)

    Stencel, John E.

    1997-01-01

    Describes how to use paper analogies as models to illustrate various concepts in biology, human anatomy, and physiology classes. Models include biochemical paper models, protein papergrams, a paper model of early brain development, and a 3-D paper model of a eukaryotic cell. (AIM)

  9. 24 CFR 902.33 - Financial reporting requirements.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 4 2010-04-01 2010-04-01 false Financial reporting requirements... Financial reporting requirements. (a) Annual financial report. All PHAs must submit their unaudited and.... The requirement for compliance with the financial reporting requirements of this section begins with...

  10. NGNP High Temperature Materials White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Lew Lommers; George Honma

    2012-08-01

    This white paper is one in a series of white papers that address key generic issues of the combined construction and operating license (COL) pre-application program key generic issues for the Next Generation Nuclear Plant reactor using the prismatic block fuel technology. The purpose of the pre-application program interactions with the NRC staff is to reduce the time required for COL application review by identifying and addressing key regulatory issues and, if possible, obtaining agreements for their resolution

  11. Toxins Best Paper Award 2015

    Directory of Open Access Journals (Sweden)

    Vernon L. Tesh

    2015-03-01

    Full Text Available In order to recognize outstanding papers related to biotoxins and toxinology that have been published in Toxins, the Editorial Board established an annual “Toxins Best Paper Award”. We are pleased to announce the first “Toxins Best Paper Award” for 2015. Nominations were selected by the Editorial Board members, with all papers published in 2011 eligible for consideration. Reviews and original research articles were evaluated separately. Following review and voting by the Toxins Best Paper Award Committee, the following three papers have won Toxins Best Paper Awards for 2015:[...

  12. Citation indexing and evaluation of scientific papers.

    Science.gov (United States)

    Margolis, J

    1967-03-10

    Evaluation by means of citation patterns can be successful only insofar as published papers and their bibliographies reflect scientific activity and nothing else. Such an innocent descrip tion is becoming less and less tenable. The present scientific explosion gave rise to more than a proportional pub lication explosion, which not only re flects the scientific explosion but has its own dynamics and vicious circles. Publication of results is probably the main means of accomplishing the al most impossible task of accounting for time and money spent on research. Inevitably, this puts a premium on quantity at the expense of quality, and, as with any other type of inflation, the problem worsens: the more papers are written, the less they count for and the greater is the pressure to publish more. What makes matters worse is the fact that the sheer volume of the"litera ture" makes it increasingly difficult to separate what is worthwhile from the rest. Critical reviews have become somewhat of a rarity, and editorial judgment is usually relegated to ref erees, who are contemporaries and, per haps, competitors of the authors-a situation which has its own undesirable implications (11, 18). It requires little imagination to discover other vicious circles, all arising from distortion of the primary reasons for publishing the results of scientific inquiry. There are, it is true, signs of ad justment to this crisis, partly due to some easing of the pressure to pub lish at all costs, and partly due to the readers' changing attitudes toward the flood of publications. An increasing amount of research is now being car ried out in the form of collective proj ects in large institutions where publica tion is no longer the standard method of accounting for individual work. At the same time there is apparent an in creasing tendency for scientific journals to polarize into the relatively few leading ones which carry important informa tion and the many subsidiary journals which serve as

  13. 29 CFR 570.63 - Occupations involved in the operation of paper-products machines, scrap paper balers, and paper...

    Science.gov (United States)

    2010-07-01

    ... the Secretary has certified to be at least as protective of the safety of minors as Standard ANSI Z245... or converting paper or pulp into a finished product, including preparing such materials for recycling... support handling and transportation as a material unit without requiring a disposable or reusable...

  14. Future Home Network Requirements

    DEFF Research Database (Denmark)

    Charbonnier, Benoit; Wessing, Henrik; Lannoo, Bart

    This paper presents the requirements for future Home Area Networks (HAN). Firstly, we discuss the applications and services as well as their requirements. Then, usage scenarios are devised to establish a first specification for the HAN. The main requirements are an increased bandwidth (towards 1...

  15. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-09-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper`s development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965-?).

  16. Maximum entropy, fractal dimension and lacunarity in quantification of cellular rejection in myocardial biopsy of patients submitted to heart transplantation

    Energy Technology Data Exchange (ETDEWEB)

    Neves, L A [Universidade Estadual Paulista, IGCE, DEMAC, Rio Claro, SP (Brazil); Oliveira, F R; Peres, F A [Faculdade de Tecnologia de Sao Jose do Rio Preto, Sao Jose do Rio Preto, SP (Brazil); Moreira, R D; Moriel, A R; De Godoy, M F [Faculdade de Medicina de Sao Jose do Rio Preto, FAMERP, Sao Jose do Rio Preto, SP (Brazil); Murta Junior, L O, E-mail: laneves@rc.unesp.br [Universidade de Sao Paulo, FFCLRP, Depto Computacao e Matematica, Ribeirao Preto (Brazil)

    2011-03-01

    This paper presents a method for the quantification of cellular rejection in endomyocardial biopsies of patients submitted to heart transplant. The model is based on automatic multilevel thresholding, which employs histogram quantification techniques, histogram slope percentage analysis and the calculation of maximum entropy. The structures were quantified with the aid of the multi-scale fractal dimension and lacunarity for the identification of behavior patterns in myocardial cellular rejection in order to determine the most adequate treatment for each case.

  17. 16 CFR 501.5 - Paper table covers, bedsheets, pillowcases.

    Science.gov (United States)

    2010-01-01

    ... 16 Commercial Practices 1 2010-01-01 2010-01-01 false Paper table covers, bedsheets, pillowcases... REQUIREMENTS AND PROHIBITIONS UNDER PART 500 § 501.5 Paper table covers, bedsheets, pillowcases. Table covers, bedsheets, and pillowcases, fabricated from paper, are exempt from the requirements of § 500.12 of this...

  18. Introduction to the Paper Symposium

    Science.gov (United States)

    Carpenter, D. K.

    1996-05-01

    surprising (and disappointing) since (a) all of these authors are experienced teachers of physical chemistry and thermodynamics, and (b) most readers of this Journal would suppose that the nature of the Gibbs function and the manner in which it is to be used are issues that have been settled long ago, and that there are no disagreements of any significance between practitioners of thermodynamics regarding these matters. Historical Background. The beginning of the controversy was occasioned by a paper of Schomaker and Waser (1), in which they dealt with an ancient problem going back to Bates. This problem is by now variously described as the "Ether Problem", or the "Bates Problem", or the "Bates-Tykodi Problem". It considers the change occurring when a two-phase system of liquid (e.g., ether) and its vapor, coexisting at equilibrium at a given temperature, is allowed to expand into a larger space (originally evacuated), with a final state consisting of the liquid and vapor still at equilibrium at the same temperature, but now occupying a larger volume (with the volumes of the liquid and vapor phases being smaller and larger, respectively, than in the original state). Since the initial and final states of the ether are both two-phase liquid/vapor systems at the same temperature and pressure, then of course deltaG = 0 for the ether itself; but how should the spontaneous nature of this process be expressed thermodynamically? Schomaker and Waser showed straightforwardly that when the ether and its surroundings are considered together, then deltaS > q/T as required by the Second Law. They further showed that deltaA definition of a Gibbs function for systems in which the pressure was not uniform and/or there were anisotropic solids present (5-7)? When it finally became apparent that there was to be no resolution of the disputed points it was decided to publish the papers in the present form, which allows each contributor to make his positions as forcefully and clearly as possible

  19. Molecules Best Paper Award 2015

    Directory of Open Access Journals (Sweden)

    Derek J. McPhee

    2015-01-01

    Full Text Available Molecules instituted some years ago a “Best Paper” award to recognize the most outstanding papers in the area of organic synthesis, natural products, medicinal chemistry and molecular diversity published each year in Molecules. We are pleased to announce the third “Molecules Best Paper Award” for 2015. The winners were chosen by the Editor-in-Chief and selected editorial board members from among all the papers published in 2011. Reviews and research papers were evaluated separately. We are pleased to announce that the following eight papers have won the Molecules Best Paper Award for 2015:[...

  20. The Conflicts between Grounded Theory Requirements and Institutional Requirements for Scientific Research

    Science.gov (United States)

    Luckerhoff, Jason; Guillemette, Francois

    2011-01-01

    The authors examined the conflicts between grounded theory (GT) requirements and institutional requirements for scientific research such as they were experienced by researchers and students. The overview of how GT was originally conceived served as background to the analysis of the problems GT users often faced when they submitted research…

  1. Simplified Analytical Methods to Analyze Lock Gates Submitted to Ship Collisions and Earthquakes

    Directory of Open Access Journals (Sweden)

    Buldgen Loic

    2015-09-01

    Full Text Available This paper presents two simplified analytical methods to analyze lock gates submitted to two different accidental loads. The case of an impact involving a vessel is first investigated. In this situation, the resistance of the struck gate is evaluated by assuming a local and a global deforming mode. The super-element method is used in the first case, while an equivalent beam model is simultaneously introduced to capture the overall bending motion of the structure. The second accidental load considered in this paper is the seismic action, for which an analytical method is presented to evaluate the total hydrodynamic pressure applied on a lock gate during an earthquake, due account being taken of the fluid-structure interaction. For each of these two actions, numerical validations are presented and the analytical results are compared to finite-element solutions.

  2. FORMULAS AND POLYNOMIALS WHICH GENERATE PRIMES AND FERMAT PSEUDOPRIMES (COLLECTED PAPERS)

    OpenAIRE

    Marius COMAN

    2016-01-01

    This book brings together fifty-two papers regarding primes and Fermat pseudoprimes, submitted by the author to the scientific database Research Gate. Part One of this book, “Sequences of primes and conjectures on them”, contains papers on sequences of primes, squares of primes, semiprimes, pairs, triplets and quadruplets of primes and conjectures on them. This part also contains papers on possible methods to obtain large primes, some of them based on concatenation, some of them o...

  3. Evolution of the scientific paper

    Energy Technology Data Exchange (ETDEWEB)

    Harmon, J.E.

    1992-01-01

    The first papers reporting original research results in technical periodicals and proceedings appeared in the late 17th century. Since that time, the typical scientific paper has evolved from a fairly simple document, accessible to a general audience, to a much more complex one, aimed at a specialized audience. The purpose of this article is to give an overview of what the first scientific papers were like and how they evolved to their present form and style. To facilitate this discussion, the scientific paper's development has arbitrarily been divided into four stages: the origin and formative years of the scientific paper (1665-1765), emergence of scientific papers written for specialized publications (1765-1865), development of the modem scientific paper (1865-1965), and hyperspecialization and computerization of the modem scientific paper (1965- ).

  4. Friendship and Belief | Keller | Philosophical Papers

    African Journals Online (AJOL)

    I intend to argue that good friendship sometimes requires epistemic irresponsibility. To put it another way, it is not always possible to be both a good friend and a diligent believer. Philosophical Papers Vol.33(3) 2004: 329-351. Full Text: EMAIL FULL TEXT EMAIL FULL TEXT · DOWNLOAD FULL TEXT DOWNLOAD FULL ...

  5. Molecules Best Paper Award 2013

    Directory of Open Access Journals (Sweden)

    Derek J. McPhee

    2013-02-01

    Full Text Available Molecules has started to institute a "Best Paper" award to recognize the most outstanding papers in the area of natural products, medicinal chemistry and molecular diversity published in Molecules. We are pleased to announce the second "Molecules Best Paper Award" for 2013. Candidates were chosen by the Editor-in-Chief and selected editorial board members from among all the papers published in 2009.

  6. Molecules Best Paper Award 2014

    Directory of Open Access Journals (Sweden)

    Derek J. McPhee

    2014-01-01

    Full Text Available Molecules instituted some years ago a “Best Paper” award to recognize the most outstanding papers in the area of natural products, medicinal chemistry and molecular diversity published each year in Molecules. We are pleased to announce the third “Molecules Best Paper Award” for 2014. The winners were chosen by the Editor-in-Chief and selected editorial board members from among all the papers published in 2010. Reviews and research papers were evaluated separately.

  7. Environmental awareness and paper recycling

    OpenAIRE

    Miranda Carreño, Rubén; Blanco Suárez, Ángeles

    2010-01-01

    The collection and utilization of recovered paper has increased over the past decades all over the world and this trend will continue. However, paper recycling is limited by the availability of resources, as well as by their recovery and quality. The paper describes how environmental awareness plays an important role in overcoming these limits. Firstly, the works carried out within the framework of COST Action E48 – “The limits of paper recycling” – are presented. These works have analysed th...

  8. Materials Best Paper Award 2013

    OpenAIRE

    Ophelia Han; Maryam Tabrizian

    2013-01-01

    Materials is instituting an annual award to recognize the outstanding papers in the area of materials science and engineering published in Materials. We are pleased to announce the first “Materials Best Paper Award” for 2013. Nominations were selected by the Section Editor-in-Chiefs and Editorial Board members of Materials from all papers published in 2009.

  9. Electro-active paper actuators

    Science.gov (United States)

    Kim, Jaehwan; Seo, Yung B.

    2002-06-01

    In this paper, the actuation mechanism of electro-active paper (EAPap) actuators is addressed and the potential of the actuators is demonstrated. EAPap is a paper that produces large displacement with small force under an electrical excitation. EAPap is made with a chemically treated paper by constructing thin electrodes on both sides of the paper. When electrical voltage is applied on the electrodes the EAPap produces bending displacement. However, the displacement output has been unstable and degraded with timescale. To improve the bending performance of EAPap, different paper fibers - softwood, hardwood, bacteria cellulose, cellophane, carbon mixture paper, electrolyte containing paper and Korean traditional paper, in conjunction with additive chemicals, were tested. Two attempts were made to construct the electrodes: the direct use of aluminum foil and the gold sputtering technique. It was found that a cellophane paper exhibits a remarkable bending performance. When 2 MV m-1 excitation voltage was applied to the paper actuator, more than 3 mm tip displacement was observed from the 30 mm long paper beam. This is quite a low excitation voltage compared with that of other EAPs. Details of the experiments and results are addressed.

  10. Flow Analysis Tool White Paper

    Science.gov (United States)

    Boscia, Nichole K.

    2012-01-01

    Faster networks are continually being built to accommodate larger data transfers. While it is intuitive to think that implementing faster networks will result in higher throughput rates, this is often not the case. There are many elements involved in data transfer, many of which are beyond the scope of the network itself. Although networks may get bigger and support faster technologies, the presence of other legacy components, such as older application software or kernel parameters, can often cause bottlenecks. Engineers must be able to identify when data flows are reaching a bottleneck that is not imposed by the network and then troubleshoot it using the tools available to them. The current best practice is to collect as much information as possible on the network traffic flows so that analysis is quick and easy. Unfortunately, no single method of collecting this information can sufficiently capture the whole endto- end picture. This becomes even more of a hurdle when large, multi-user systems are involved. In order to capture all the necessary information, multiple data sources are required. This paper presents a method for developing a flow analysis tool to effectively collect network flow data from multiple sources and provide that information to engineers in a clear, concise way for analysis. The purpose of this method is to collect enough information to quickly (and automatically) identify poorly performing flows along with the cause of the problem. The method involves the development of a set of database tables that can be populated with flow data from multiple sources, along with an easyto- use, web-based front-end interface to help network engineers access, organize, analyze, and manage all the information.

  11. On Constructing Seminal Paper Genealogy.

    Science.gov (United States)

    Bae, Duck-Ho; Hwang, Se-Mi; Kim, Sang-Wook; Faloutsos, Christos

    2014-01-01

    Let us consider that someone is starting a research on a topic that is unfamiliar to them. Which seminal papers have influenced the topic the most? What is the genealogy of the seminal papers in this topic? These are the questions that they can raise, which we try to answer in this paper. First, we propose an algorithm that finds a set of seminal papers on a given topic. We also address the performance and scalability issues of this sophisticated algorithm. Next, we discuss the measures to decide how much a paper is influenced by another paper. Then, we propose an algorithm that constructs a genealogy of the seminal papers by using the influence measure and citation information. Finally, through extensive experiments with a large volume of a real-world academic literature data, we show the effectiveness and efficiency of our approach.

  12. Generalized drying curves in conductive/convective paper drying

    Directory of Open Access Journals (Sweden)

    O.C. Motta Lima

    2000-12-01

    Full Text Available This work presents a study related to conductive/convective drying of paper (cellulose sheets over heated surfaces, under natural and forced air conditions. The experimental apparatus consists in a metallic box heated by a thermostatic bath containing an upper surface on which the paper samples (about 1 mm thick are placed. The system is submitted to ambient air under two different conditions: natural convection and forced convection provide by an adjustable blower. The influence of initial paper moisture content, drying (heated surface temperature and air velocity on drying curves behavior is observed under different drying conditions. Hence, these influence is studied through the proposal of generalized drying curves. Those curves are analyzed individually for each air condition exposed above and for both together. A set of equations to fit them is proposed and discussed.

  13. Asian-Pacific Papers. Occasional Papers Number 10.

    Science.gov (United States)

    McCarthy, Brian, Ed.

    Sixteen papers are presented. Topics covered include language teaching, discourse analysis, code switching, phonetics, language and cultural identity, and descriptive and comparative studies. All presenters were from the Asia-Pacific area of the world. Papers include: "The Baba Malay Lexicon: Hokkien Loanwords in Baba Malay" (Anne…

  14. 40 CFR 63.1110 - Reporting requirements.

    Science.gov (United States)

    2010-07-01

    ... submitted on electronic media. (h) Adjustment to timing of submittals and review of required communications... Standards, U.S. Environmental Protection Agency, MD-10, Research Triangle Park, North Carolina, 27711. The... of this subpart for that report or notification. (3) Method of submission. Wherever this subpart...

  15. 42 CFR 447.253 - Other requirements.

    Science.gov (United States)

    2010-10-01

    ..., must submit the related information required by § 447.255 of this subpart, and must comply with all... State and Federal laws, regulations, and quality and safety standards. (ii) With respect to inpatient... situation of hospitals which serve a disproportionate number of low income patients with special needs; (B...

  16. 49 CFR 565.26 - Reporting requirements.

    Science.gov (United States)

    2010-10-01

    ... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION VEHICLE IDENTIFICATION NUMBER (VIN) REQUIREMENTS Alternative VIN... make and type of vehicle it manufactures at least 60 days before affixing the first VIN using the identifier. Manufacturers whose unique identifier appears in the fourth section of the VIN shall also submit...

  17. Education Levels and Mortgage Application Outcomes: Evidence of Financial Literacy. Discussion Paper No. 1369-09

    Science.gov (United States)

    Collins, J. Michael

    2009-01-01

    This paper uses 2005 Home Mortgage Disclosure Act data aggregated by census tract to measure the relationship between census tract-level college completion rates and the rates at which first lien refinance mortgage applicants submit incomplete loan applications, withdraw loan applications before they are reviewed, and reject lender approved loan…

  18. Not Just Another Research Paper: Understanding Global Sustainability through Digital Documentary

    Science.gov (United States)

    Green, Martha R.; Walters, Lynne Masel; Walters, Timothy; Wang, Liangyan

    2015-01-01

    This article evaluates the impact of extending a traditional written research paper into a digital documentary on students' perception and level of comprehension of a global sustainability issue. An adaptation of Moon's (1999) five-stage map of learning was used to assess the written and digital projects students submitted to a statewide…

  19. The Hot and Energetic Universe: A White Paper presenting the science theme motivating the Athena+ mission

    NARCIS (Netherlands)

    Nandra, Kirpal; Barret, Didier; Barcons, Xavier; Fabian, Andy; den Herder, Jan-Willem; Piro, Luigi; Watson, Mike; Adami, Christophe; Aird, James; Afonso, Jose Manuel; Alexander, Dave; Argiroffi, Costanza; Amati, Lorenzo; Arnaud, Monique; Atteia, Jean-Luc; Audard, Marc; Badenes, Carles; Ballet, Jean; Ballo, Lucia; Bamba, Aya; Bhardwaj, Anil; Stefano Battistelli, Elia; Becker, Werner; De Becker, Michaël; Behar, Ehud; Bianchi, Stefano; Biffi, Veronica; Bîrzan, Laura; Bocchino, Fabrizio; Bogdanov, Slavko; Boirin, Laurence; Boller, Thomas; Borgani, Stefano; Borm, Katharina; Bouché, Nicolas; Bourdin, Hervé; Bower, Richard; Braito, Valentina; Branchini, Enzo; Branduardi-Raymont, Graziella; Bregman, Joel; Brenneman, Laura; Brightman, Murray; Brüggen, Marcus; Buchner, Johannes; Bulbul, Esra; Brusa, Marcella; Bursa, Michal; Caccianiga, Alessandro; Cackett, Ed; Campana, Sergio; Cappelluti, Nico; Cappi, Massimo; Carrera, Francisco; Ceballos, Maite; Christensen, Finn; Chu, You-Hua; Churazov, Eugene; Clerc, Nicolas; Corbel, Stephane; Corral, Amalia; Comastri, Andrea; Costantini, Elisa; Croston, Judith; Dadina, Mauro; D'Ai, Antonino; Decourchelle, Anne; Della Ceca, Roberto; Dennerl, Konrad; Dolag, Klaus; Done, Chris; Dovciak, Michal; Drake, Jeremy; Eckert, Dominique; Edge, Alastair; Ettori, Stefano; Ezoe, Yuichiro; Feigelson, Eric; Fender, Rob; Feruglio, Chiara; Finoguenov, Alexis; Fiore, Fabrizio; Galeazzi, Massimiliano; Gallagher, Sarah; Gandhi, Poshak; Gaspari, Massimo; Gastaldello, Fabio; Georgakakis, Antonis; Georgantopoulos, Ioannis; Gilfanov, Marat; Gitti, Myriam; Gladstone, Randy; Goosmann, Rene; Gosset, Eric; Grosso, Nicolas; Guedel, Manuel; Guerrero, Martin; Haberl, Frank; Hardcastle, Martin; Heinz, Sebastian; Alonso Herrero, Almudena; Hervé, Anthony; Holmstrom, Mats; Iwasawa, Kazushi; Jonker, Peter; Kaastra, Jelle; Kara, Erin; Karas, Vladimir; Kastner, Joel; King, Andrew; Kosenko, Daria; Koutroumpa, Dimita; Kraft, Ralph; Kreykenbohm, Ingo; Lallement, Rosine; Lanzuisi, Giorgio; Lee, J.; Lemoine-Goumard, Marianne; Lobban, Andrew; Lodato, Giuseppe; Lovisari, Lorenzo; Lotti, Simone; McCharthy, Ian; McNamara, Brian; Maggio, Antonio; Maiolino, Roberto; De Marco, Barbara; de Martino, Domitilla; Mateos, Silvia; Matt, Giorgio; Maughan, Ben; Mazzotta, Pasquale; Mendez, Mariano; Merloni, Andrea; Micela, Giuseppina; Miceli, Marco; Mignani, Robert; Miller, Jon; Miniutti, Giovanni; Molendi, Silvano; Montez, Rodolfo; Moretti, Alberto; Motch, Christian; Nazé, Yaël; Nevalainen, Jukka; Nicastro, Fabrizio; Nulsen, Paul; Ohashi, Takaya; O'Brien, Paul; Osborne, Julian; Oskinova, Lida; Pacaud, Florian; Paerels, Frederik; Page, Mat; Papadakis, Iossif; Pareschi, Giovanni; Petre, Robert; Petrucci, Pierre-Olivier; Piconcelli, Enrico; Pillitteri, Ignazio; Pinto, C.; de Plaa, Jelle; Pointecouteau, Etienne; Ponman, Trevor; Ponti, Gabriele; Porquet, Delphine; Pounds, Ken; Pratt, Gabriel; Predehl, Peter; Proga, Daniel; Psaltis, Dimitrios; Rafferty, David; Ramos-Ceja, Miriam; Ranalli, Piero; Rasia, Elena; Rau, Arne; Rauw, Gregor; Rea, Nanda; Read, Andy; Reeves, James; Reiprich, Thomas; Renaud, Matthieu; Reynolds, Chris; Risaliti, Guido; Rodriguez, Jerome; Rodriguez Hidalgo, Paola; Roncarelli, Mauro; Rosario, David; Rossetti, Mariachiara; Rozanska, Agata; Rovilos, Emmanouil; Salvaterra, Ruben; Salvato, Mara; Di Salvo, Tiziana; Sanders, Jeremy; Sanz-Forcada, Jorge; Schawinski, Kevin; Schaye, Joop; Schwope, Axel; Sciortino, Salvatore; Severgnini, Paola; Shankar, Francesco; Sijacki, Debora; Sim, Stuart; Schmid, Christian; Smith, Randall; Steiner, Andrew; Stelzer, Beate; Stewart, Gordon; Strohmayer, Tod; Strüder, Lothar; Sun, Ming; Takei, Yoh; Tatischeff, V.; Tiengo, Andreas; Tombesi, Francesco; Trinchieri, Ginevra; Tsuru, T. G.; Ud-Doula, Asif; Ursino, Eugenio; Valencic, Lynne; Vanzella, Eros; Vaughan, Simon; Vignali, Cristian; Vink, Jacco; Vito, Fabio; Volonteri, Marta; Wang, Daniel; Webb, Natalie; Willingale, Richard; Wilms, Joern; Wise, Michael; Worrall, Diana; Young, Andrew; Zampieri, Luca; In't Zand, Jean; Zane, Silvia; Zezas, Andreas; Zhang, Yuying; Zhuravleva, Irina

    2013-01-01

    This White Paper, submitted to the recent ESA call for science themes to define its future large missions, advocates the need for a transformational leap in our understanding of two key questions in astrophysics: 1) How does ordinary matter assemble into the large scale structures that we see today?

  20. Molecules Best Paper Award 2012

    Directory of Open Access Journals (Sweden)

    Derek J. McPhee

    2012-02-01

    Full Text Available Molecules starts to institute the “Best Paper” award to recognize these outstanding papers in the area of natural products, medicinal chemistry and molecular diversity published in Molecules. We are pleased to announce the first “Molecules Best Paper Award” for 2012. Nominations were selected by the editor-in-chief and selected editorial board members from all the papers published in 2008. [...

  1. Nineteen papers on algebraic semigroups

    CERN Document Server

    Aizenshtat, A Ya; Podran, N E; Ponizovskii, IS; Shain, BM

    1988-01-01

    This volume contains papers selected by leading specialists in algebraic semigroups in the U.S., the United Kingdom, and Australia. Many of the papers strongly influenced the development of algebraic semigroups, but most were virtually unavailable outside the U.S.S.R. Written by some of the most prominent Soviet researchers in the field, the papers have a particular emphasis on semigroups of transformations. Boris Schein of the University of Arkansas is the translator.

  2. Exam papers on-demand

    OpenAIRE

    Rumsey, Sally; Maslin, Jon

    2001-01-01

    The Exam Papers On-demand Project comprised 1) research into the feasibility of electronic provision of University of Surrey past exam papers and 2) the subsequent development of a scalable and sustainable system for allowing Internet access to past exam papers by members of the University. Although this has been achieved at other institutions, the solution at the University of Surrey is believed to be innovative in a number of ways. The achievements include the compliance with the Dublin Cor...

  3. English for writing research papers

    National Research Council Canada - National Science Library

    Wallwork, Adrian

    2011-01-01

    ... points when you write more papers in the future. The useful phrases in Chap. 19 will help you to structure your paper and give you an indication of the typical coverage of each section. I have written many papers before. Will I still learn something from this book? If you have ever had a paper rejected due to poor English, poor structure or poor readability, then this book will certainly help you. What are the three most important things I will learn from this book? This book is based on three fund...

  4. Effect of cement types on the tensile strength of metallic crowns submitted to thermocycling

    Directory of Open Access Journals (Sweden)

    Consani Simonides

    2003-01-01

    Full Text Available The relationship between metallic cast crowns and tensile strength according to cement types submitted to thermocycling was studied. Seventy-two metallic crowns were cast with Verabond II Ni-Cr alloy and cemented in standardized preparations with 10º tapering. Three types of finishing line (45-degree chamfered, 20-degree bevel shoulder and right shoulder were made with diamond burs on bovine teeth. Twenty-four metallic crowns in each group were randomly subdivided into three subgroups of 8 samples each according to the cement used: SS White zinc phosphate cement, Vitremer resin-modified glass ionomer cement, and Rely X resin cement and were submitted to thermocycling. Retention was evaluated according to tensile load required to displace the metallic cast crowns from tooth preparations with an Instron testing machine. ANOVA and Tukey's test showed a statistically significant difference among luting materials, with greater results for Rely X resin cement (24.9 kgf followed by SS White zinc phosphate cement (13.3 kgf and Vitremer resin-modified glass ionomer cement (10.1 kgf. The finishing line types did not influence the tensile resistance of the crowns fixed with the three cements. Increased tensile resistance of metallic crowns fixed on bovine teeth was obtained with resin cement, independent of the finishing line types.

  5. Bond strength of resin-resin interfaces contaminated with saliva and submitted to different surface treatments

    Directory of Open Access Journals (Sweden)

    Adilson Yoshio Furuse

    2007-12-01

    Full Text Available The purpose of this study was to investigate the effect of different surface treatments on shear bond strength of saliva-contaminated resin-resin interfaces. Flat resin surfaces were fabricated. In the control group, no contamination or surface treatment was performed. The resin surfaces of the experimental groups were contaminated with saliva and air-dried, and then submitted to: (G1 rinsing with water and drying; (G2 application of an adhesive system; (G3 rinsing and drying, abrasion with finishing disks, etching and application of adhesive system; (G4 rinsing and drying, etching, application of silane and adhesive system. Resin cylinders were placed over the treated surfaces. The specimens were stored in water or ethanol. Shear bond strength tests were performed and the mode of failure was evaluated. Data were submitted to two-way ANOVA and Dunnett T3 test. Contamination of resin-resin interfaces with saliva significantly reduced shear strength, especially after prolonged storage (p<0.05. Similar values to the original bond strength were obtained after abrasion and application of adhesive (G3 or etching and application of silane and adhesive (G4. If contamination occurs, a surface treatment is required to guarantee an adequate interaction between the resin increments.

  6. 30 CFR 777.14 - Maps and plans: General requirements.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Maps and plans: General requirements. 777.14... REGULATORY PROGRAMS GENERAL CONTENT REQUIREMENTS FOR PERMIT APPLICATIONS § 777.14 Maps and plans: General requirements. (a) Maps submitted with applications shall be presented in a consolidated format, to the extent...

  7. 46 CFR 356.17 - Annual requirements for vessel owners.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Annual requirements for vessel owners. 356.17 Section... DOCUMENTATION Requirements for Vessel Owners § 356.17 Annual requirements for vessel owners. (a) An owner of a... section. The vessel owner does not have to submit duplicate copies of documents that have already been...

  8. 21 CFR 1.279 - When must prior notice be submitted to FDA?

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 1 2010-04-01 2010-04-01 false When must prior notice be submitted to FDA? 1.279... Imported Food § 1.279 When must prior notice be submitted to FDA? (a) Except as provided in paragraph (c) of this section, you must submit the prior notice to FDA and the prior notice submission must be...

  9. 42 CFR 405.946 - Evidence to be submitted with the redetermination request.

    Science.gov (United States)

    2010-10-01

    ... 42 Public Health 2 2010-10-01 2010-10-01 false Evidence to be submitted with the redetermination...) Redeterminations § 405.946 Evidence to be submitted with the redetermination request. (a) Evidence submitted with... the contractor's determination and should include any evidence that the party believes should be...

  10. 40 CFR 60.2625 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... or Before November 30, 1999 Model Rule-Waste Management Plan § 60.2625 When must I submit my waste management plan? You must submit a waste management plan no later than the date specified in table 1 of this...

  11. 40 CFR 62.14585 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 8 2010-07-01 2010-07-01 false When must I submit my waste management... Commenced Construction On or Before November 30, 1999 Waste Management Plan § 62.14585 When must I submit my waste management plan? You must submit a waste management plan no later than April 5, 2004. ...

  12. 40 CFR 60.3011 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Model Rule-Waste Management Plan § 60.3011 When must I submit my waste management plan? You must submit a waste management plan no later than 60 days following the initial performance test as specified in...

  13. 40 CFR 60.2060 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Management Plan § 60.2060 When must I submit my waste management plan? You must submit a waste management... Commercial and Industrial Solid Waste Incineration Units for Which Construction Is Commenced After November...

  14. 40 CFR 60.2900 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... Waste Management Plan § 60.2900 When must I submit my waste management plan? You must submit a waste management plan prior to commencing construction, reconstruction, or modification. ...

  15. 40 CFR 152.93 - Citation of a previously submitted valid study.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 23 2010-07-01 2010-07-01 false Citation of a previously submitted... Data Submitters' Rights § 152.93 Citation of a previously submitted valid study. An applicant may... the citation is necessary. (b) Study previously submitted by another person. If the applicant is not...

  16. 7 CFR 28.46 - Method of submitting samples and types.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Method of submitting samples and types. 28.46 Section... Standards Act Sample Or Type Comparison § 28.46 Method of submitting samples and types. The method of submitting samples and types for comparison shall be the same as that prescribed in this subpart for...

  17. CALL FOR PAPERS: Special issue on new developments in strongly coupled Coulomb systems

    Science.gov (United States)

    Neilson, David; Senatore, Gaetano

    2008-10-01

    This is a call for contributions to a special issue of Journal of Physics A: Mathematical and Theoretical dedicated to the subject of the `International Conference on Strongly Coupled Coulomb Systems (SCCS)', 29 July-2 August 2008, Camerino, Italy (http://sccs2008.df.unicam.it/). Participants of that meeting, as well as other scientists working in the field, are invited to submit a research paper to this issue. Editorial policy The Editorial Board has invited David Neilson (University of Camerino and NEST, Pisa) and Gaetano Senatore (University of Trieste and Democritos INFM-CNR) to serve as Guest Editors for the special issue. Their criteria for acceptance of contributions are as follows: •The subject of the paper should relate to the subject of the conference (see list of session topics on the conference website: http://sccs2008.df.unicam.it/?q=node/14). •Contributions will be refereed and processed according to the usual procedures and standards of the journal. •Conference papers may be based on already published work but should either (i) contain significant additional new results and/or insights or (ii) give a survey of the present state of the art, a critical assessment of the present understanding of a topic, and a discussion of open problems. Each registered participant can submit no more than one paper. •Papers submitted by non-participants should be original and contain substantial new results. Guidelines for preparation of contributions • The deadline for contributed papers is 15 October 2008. •The journal page limits for papers are as follows: keynote papers (13 pages); invited papers (10 pages); contributed papers (8 pages); poster papers (4 pages). Each registered participant can submit no more than one paper. Papers from non-participants will have a page limit of 10 pages. For papers exceeding these limits the Guest Editors reserve the right to request a reduction in length. Further advice on document preparation can be found at www

  18. PaperBLAST: Text Mining Papers for Information about Homologs.

    Science.gov (United States)

    Price, Morgan N; Arkin, Adam P

    2017-01-01

    Large-scale genome sequencing has identified millions of protein-coding genes whose function is unknown. Many of these proteins are similar to characterized proteins from other organisms, but much of this information is missing from annotation databases and is hidden in the scientific literature. To make this information accessible, PaperBLAST uses EuropePMC to search the full text of scientific articles for references to genes. PaperBLAST also takes advantage of curated resources (Swiss-Prot, GeneRIF, and EcoCyc) that link protein sequences to scientific articles. PaperBLAST's database includes over 700,000 scientific articles that mention over 400,000 different proteins. Given a protein of interest, PaperBLAST quickly finds similar proteins that are discussed in the literature and presents snippets of text from relevant articles or from the curators. PaperBLAST is available at http://papers.genomics.lbl.gov/. IMPORTANCE With the recent explosion of genome sequencing data, there are now millions of uncharacterized proteins. If a scientist becomes interested in one of these proteins, it can be very difficult to find information as to its likely function. Often a protein whose sequence is similar, and which is likely to have a similar function, has been studied already, but this information is not available in any database. To help find articles about similar proteins, PaperBLAST searches the full text of scientific articles for protein identifiers or gene identifiers, and it links these articles to protein sequences. Then, given a protein of interest, it can quickly find similar proteins in its database by using standard software (BLAST), and it can show snippets of text from relevant papers. We hope that PaperBLAST will make it easier for biologists to predict proteins' functions.

  19. Problem Solving through Paper Folding

    Science.gov (United States)

    Wares, Arsalan

    2014-01-01

    The purpose of this article is to describe a couple of challenging mathematical problems that involve paper folding. These problem-solving tasks can be used to foster geometric and algebraic thinking among students. The context of paper folding makes some of the abstract mathematical ideas involved relatively concrete. When implemented…

  20. Healthy Lifestyle Solutions : White Paper

    NARCIS (Netherlands)

    Anderson, Joel; Klein, Michel; Beun, Robbert Jan; Boh, Bastiaan; Kamphorst, Bart; Manzoor Rajper, Adnan; Middelweerd, Anouk; Mollee, Julienka; Nauts, Sanne; Roefs, Anne; te Velde, Saskia

    2015-01-01

    The present white paper presents five principles that can guide the design and implementation of effective and appropriate approaches to e-coaching and discusses both their scientific underpinnings and their (potential) applications. The paper crystallises insights that have emerged in recent and

  1. Happy Birthday with Handmade Paper

    Science.gov (United States)

    Skophammer, Karen

    2009-01-01

    Making paper in the blender is always exciting for students. When coupled with using the paper to make a mural for a birthday celebration, the excitement swells. Eric Carle is a great inspiration to children with the books he has written and illustrated, such as "The Very Hungry Caterpillar" and "The Very Busy Spider." In this article, the author…

  2. Seven papers in applied mathematics

    CERN Document Server

    Anosov, D V; Bogolyubov, N N; Bogoyavlenskii, O I; Bondarchuk, V S

    1985-01-01

    These papers in applied mathematics have been carefully selected by a joint committee of the AMS, the Association for Symbolic Logic (ASL), and the Institute of Mathematical Statistics (IMS) from publications not otherwise translated into English. The translated papers are carefully edited prior to publication.

  3. Ten papers on complex analysis

    CERN Document Server

    Arakelyan, N U; Krushkal', S L; Gutlyanskii, V Ya; Kudyavin, V S

    1984-01-01

    The papers in this volume cover both one-variable and several-variable problems. An example of the former is a fifty-year-old classic on conformal mapping by M. A. Lavrent€´ev, while the latter is represented by a paper on the tangent complex of an analytic space by V. P. Palamodov.

  4. Moral Cognitivism | Lillehammer | Philosophical Papers

    African Journals Online (AJOL)

    The paper explicates a set of criteria the joint satisfaction of which is taken to qualify moral judgements as cognitive. The paper examines evidence that some moral judgements meet these criteria, and relates the resulting conception of moral judgements to ongoing controversies about cognitivism in ethics. Philosophical ...

  5. Analgesia of Epidural Tramadol in Dogs Submitted to Orchiectomy

    OpenAIRE

    de Almeida, Ricardo Miyasaka; Escobar, André [UNESP; Maguilnik, Samara

    2009-01-01

    Epidural tramadol in veterinary medicine has been studied in only a few instances. In this case, 36 dogs submitted to orchiectomy received 6.0 mg/kg of lidocaine combined with 1.0 mg/kg of tramadol, 0.1 mg/kg of morphine or 0.01 ml/kg of 0.9% NaCl by epidural route. Analgesia was assessed at 4, 8, 12, 18 and 24 hours after surgery. There were no differences between morphine and tramadol over the time of evaluation within these groups, and no complementary analgesia was necessary. In the NaCl ...

  6. How to write and publish scientific papers: scribing information for pharmacists.

    Science.gov (United States)

    Hamilton, C W

    1992-10-01

    The principles of writing and publishing scientific papers are outlined. Scientific writing can be both professionally and financially rewarding, but many pharmacists hesitate to write for publication. A primary obstacle is not knowing how to begin. Thoughtful planning is the first and most important step. Before writing a word, the writer should identify the main message, audience, target journal, resource materials, type of manuscript, and authorship. The sections of a paper reporting original research include the title, abstract, introduction, methods, results, discussion, conclusion, references, and tables and figures. Some of these elements also appear in review papers and columns. In general, information given in one section should not duplicate information in another. The writer typically drafts the methods section first, followed by the results, the discussion, and the introduction. Along with intellectual responsibility for the paper, an author must assume various ethical responsibilities, such as ensuring that it contains no plagiarism, that all sources of funding have been acknowledged, and that the paper has not been simultaneously submitted to other journals. To enhance the likelihood of publication, the writer should edit the manuscript carefully and follow the target journal's instructions to contributors. Once the writer has submitted a paper, it must pass the muster of editors and, for peer-reviewed journals, outside experts. Several revisions may be requested before final acceptance. Pharmacists who adhere to the established pattern for writing and submitting scientific papers have the best chance of seeing their work in print.

  7. 41 CFR 102-34.335 - How do I submit information to the General Services Administration (GSA) for the Federal Fleet...

    Science.gov (United States)

    2010-07-01

    ... (Continued) FEDERAL MANAGEMENT REGULATION PERSONAL PROPERTY 34-MOTOR VEHICLE MANAGEMENT Federal Fleet Report... Orders. In addition, the Office of Management and Budget (OMB) requires agency Fleet Managers and budget... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false How do I submit...

  8. 30 CFR 285.700 - What reports must I submit to MMS before installing facilities described in my approved SAP, COP...

    Science.gov (United States)

    2010-07-01

    ... installing facilities described in my approved SAP, COP, or GAP? 285.700 Section 285.700 Mineral Resources... § 285.700 What reports must I submit to MMS before installing facilities described in my approved SAP... in your approved COP (§ 285.632(a)) and, when required by this part, your SAP (§ 285.614(b)) or GAP...

  9. Paper use in research ethics applications and study conduct.

    Science.gov (United States)

    Chakladar, Abhijoy; Eckstein, Sue; White, Stuart M

    2011-02-01

    Application for Research Ethics Committee (REC) approval and the conduct of medical research is paper intensive. This retrospective study examined all applications to a single REC in the south of England over one year. It estimated the mass of paper used, comparing the proportional paper consumption of different trial types and during different stages of the research process, quantifying the consumption in terms of carbon dioxide emissions. In 2009, 68 trials were submitted to the REC. Total paper consumption for the REC process and study conduct was 176,150 sheets of A4 paper (879 kg), equivalent to an estimated 11.5 million sheets (88 tonnes, 2100 trees) a year for the U.K.; the REC process accounted for 26.4%. REC applications and the conduct of approved trials generate considerable environmental impact through paper consumption contributing to the NHS's carbon footprint. Paper use might be reduced through the implementation of digital technologies and revised research methods, namely changing attitudes in both researchers and ethics committees.

  10. On the Availability of ESO Data Papers on arXiv/astro-ph

    Science.gov (United States)

    Grothkopf, U.; Bordelon, D.; Meakins, S.; Emsellem, E.

    2017-12-01

    Using the ESO Telescope Bibliography database telbib, we have investigated the percentage of ESO data papers that were submitted to the arXiv/astro-ph e-print server and that are therefore free to read. Our study revealed an availability of up to 96 % of telbib papers on arXiv over the years 2010 to 2017. We also compared the citation counts of arXiv vs. non-arXiv papers and found that on average, papers submitted to arXiv are cited 2.8 times more often than those not on arXiv. While simulations suggest that these findings are statistically significant, we cannot yet draw firm conclusions as to the main cause of these differences.

  11. Analysis of trends in publications and citations of papers on nuclear science and technology field in Korea: Focusing on the Scopus Data Base

    Energy Technology Data Exchange (ETDEWEB)

    Chun, Young Choon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2015-10-15

    The data on the top 20 journals in the Science Citation Index(Expanded) for 10 years from 2005 to 2014 indicated the first and second positions for Korean papers were occupied by the Korean journals, which implied the need for globalization of target journals to publish Korean papers. Further study is required for comparative analysis of the factors impacting on the number of papers and citations, which is the criteria for quality evaluation of papers, in other area than the Nuclear Energy and Engineering to which this study was limited. As the media for research process and results, papers play an important role in the evaluation of research projects. While the traditional methods for evaluation of research results have been focused on quantity aspects, the implication of quality aspect is increasingly recognized. Most national labs have begun to shift from quantity to quality in their criteria for overall evaluation of research results. It is therefore desired to maximize the quality level of the research papers for which the trends in citation as quality indicator could be analyzed as well as the quantity aspect. This paper looks at the trends in the number of citation and papers as the indicators of quality and quantify, as drawn from Scopus Data Base. It also suggest top 5 Science Citation Index(Expanded) journals in terms of increase rate in both number of papers and citations. The purpose is to compare them with top 20 Science Citation Index(Expanded) journals in which Korea Atomic Energy Research researchers have published their papers in the past 10 years from 2005 to 2014 were submitted. This paper looked at the trends in the number of papers and citations as an indicator of quality of the research papers in the area of Nuclear Energy and Engineering which is in fact a limitation to the key subject area, not covering the whole nuclear science and technology.

  12. Quantum interaction. Revised selected papers

    Energy Technology Data Exchange (ETDEWEB)

    Song, Dawei; Zhang, Peng; Wang, Lei [Aberdeen Univ. (United Kingdom). School of Computing; Melucci, Massimo [Padua Univ., Padova (Italy). Dept. of Information Engineering; Frommholz, Ingo [Bedfordshire Univ. (United Kingdom); Arafat, Sachi (eds.) [Glasgow Univ. (United Kingdom). School of Computing Science

    2011-07-01

    This book constitutes the thoroughly refereed post-conference proceedings of the 5th International Symposium on Quantum Interaction, QI 2011, held in Aberdeen, UK, in June 2011. The 26 revised full papers and 6 revised poster papers, presented together with 1 tutorial and 1 invited talk were carefully reviewed and selected from numerous submissions during two rounds of reviewing and improvement. The papers show the cross-disciplinary nature of quantum interaction covering topics such as computation, cognition, mechanics, social interaction, semantic space and information representation and retrieval. (orig.)

  13. HTGR Mechanistic Source Terms White Paper

    Energy Technology Data Exchange (ETDEWEB)

    Wayne Moe

    2010-07-01

    The primary purposes of this white paper are: (1) to describe the proposed approach for developing event specific mechanistic source terms for HTGR design and licensing, (2) to describe the technology development programs required to validate the design methods used to predict these mechanistic source terms and (3) to obtain agreement from the NRC that, subject to appropriate validation through the technology development program, the approach for developing event specific mechanistic source terms is acceptable

  14. Perioperative fasting time among cancer patients submitted to gastrointestinal surgeries

    Directory of Open Access Journals (Sweden)

    Nayara de Castro Pereira

    Full Text Available Abstract OBJECTIVE To identify the length of perioperative fasting among patients submitted to gastrointestinal cancer surgeries. METHOD Retrospective cohort study, developed by consulting the medical records of 128 patients submitted to gastrointestinal cancer surgeries. RESULTS The mean of total length of fasting was 107.6 hours. The total length of fasting was significantly associated with the number of symptoms presented before (p=0.000 and after the surgery (p=0.007, the length of hospital stay (p=0.000, blood transfusion (p=0.013, nasogastric tube (p=0.001 and nasojejunal tube (p=0,003, postoperative admission at ICU (p=0.002, postoperative death (p=0.000 and length of preoperative fasting (p=0.000. CONCLUSION The length of fasting is associated with complications that affect the quality of the patients’ postoperative recovery and nurses’ work. The nursing team should be alert to this aspect and being responsible for overseeing the patients’ interest, should not permit the unnecessary extension of fasting.

  15. All-printed paper memory

    KAUST Repository

    He, Jr-Hau

    2016-08-11

    All-printed paper-based substrate memory devices are described. In an embodiment, a paper-based memory device is prepared by coating one or more areas of a paper substrate with a conductor material such as a carbon paste, to form a first electrode of a memory, depositing a layer of insulator material, such as titanium dioxide, over one or more areas of the conductor material, and depositing a layer of metal over one or more areas of the insulator material to form a second electrode of the memory. In an embodiment, the device can further include diodes printed between the insulator material and the second electrode, and the first electrode and the second electrodes can be formed as a crossbar structure to provide a WORM memory. The various layers and the diodes can be printed onto the paper substrate by, for example, an ink jet printer.

  16. Fifteen papers in complex analysis

    CERN Document Server

    Aizenberg, L A; Degtyar', P V; Gindikin, S G; Gaidis, Ya Yu

    1990-01-01

    The papers in this volume range over a variety of topics in complex analysis, including holomorphic and entire functions, integral representations, the local theory of residues, complex manifolds, singularities, and CR structures.

  17. Deterministic methods in radiation transport. A compilation of papers presented February 4-5, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Rice, A. F.; Roussin, R. W. [eds.

    1992-06-01

    The Seminar on Deterministic Methods in Radiation Transport was held February 4--5, 1992, in Oak Ridge, Tennessee. Eleven presentations were made and the full papers are published in this report, along with three that were submitted but not given orally. These papers represent a good overview of the state of the art in the deterministic solution of radiation transport problems for a variety of applications of current interest to the Radiation Shielding Information Center user community.

  18. Deterministic methods in radiation transport. A compilation of papers presented February 4--5, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Rice, A.F.; Roussin, R.W. [eds.

    1992-06-01

    The Seminar on Deterministic Methods in Radiation Transport was held February 4--5, 1992, in Oak Ridge, Tennessee. Eleven presentations were made and the full papers are published in this report, along with three that were submitted but not given orally. These papers represent a good overview of the state of the art in the deterministic solution of radiation transport problems for a variety of applications of current interest to the Radiation Shielding Information Center user community.

  19. Working Paper on Social capital

    DEFF Research Database (Denmark)

    Lassen Hanan, Anne

    This paper outlines the major schools within social capital theory. Contemporary authors such as Coleman, Putnam and Bourdieu are elaborated on. The paper also presents a non-exhaustive review on studies of social capital. Furthermore, a criticial discussion on social capital is reviewed, before ...... the concept is bridged to the context of farmers and traders in yam and cassava value chains in the Ghana....

  20. Street Papers, Work, and Begging

    DEFF Research Database (Denmark)

    Cockburn, Patrick Joseph

    2014-01-01

    Street papers are publications produced specifically for sale by the homeless and other vulnerable people in many countries around the world. Their social status is, however, often conspicuously unstable: ‘Get a job!’ has been reported as a common insult addressed to vendors, and street paper org......-loaded associations that position them and others in social space, and how the ‘experimental’ combination of business and social responsibilities tests social actors’ abilities to adapt to this practice....

  1. Tactics for D : A Methodology for EQE Paper D

    NARCIS (Netherlands)

    Mulder, Cees; Blokhuis, Nyske

    2016-01-01

    The idea for this book emanated from a series of courses preparing for the EQE given at the Faculty of Law of Maastricht University. For most Exam papers it is required to learn the necessary legal background and the substantive requirements related to the subject of the paper. However, it also has

  2. All-printed paper memory

    KAUST Repository

    Lien, Derhsien

    2014-08-26

    We report the memory device on paper by means of an all-printing approach. Using a sequence of inkjet and screen-printing techniques, a simple metal-insulator-metal device structure is fabricated on paper as a resistive random access memory with a potential to reach gigabyte capacities on an A4 paper. The printed-paper-based memory devices (PPMDs) exhibit reproducible switching endurance, reliable retention, tunable memory window, and the capability to operate under extreme bending conditions. In addition, the PBMD can be labeled on electronics or living objects for multifunctional, wearable, on-skin, and biocompatible applications. The disposability and the high-security data storage of the paper-based memory are also demonstrated to show the ease of data handling, which are not achievable for regular silicon-based electronic devices. We envision that the PPMDs manufactured by this cost-effective and time-efficient all-printing approach would be a key electronic component to fully activate a paper-based circuit and can be directly implemented in medical biosensors, multifunctional devices, and self-powered systems. © 2014 American Chemical Society.

  3. 31 CFR 205.26 - What are the requirements for preparing Annual Reports?

    Science.gov (United States)

    2010-07-01

    ... 31 Money and Finance: Treasury 2 2010-07-01 2010-07-01 false What are the requirements for preparing Annual Reports? 205.26 Section 205.26 Money and Finance: Treasury Regulations Relating to Money... prescribe that the Annual Report be submitted by electronic means. (b) A State must submit a description and...

  4. Life Cycle Analysis of Tissue Paper Manufacturing From Virgin Pulp or Recycled Waste Paper

    Directory of Open Access Journals (Sweden)

    Masternak-Janus Aneta

    2015-09-01

    Full Text Available The aim of this work is to compare the environmental impacts of two production processes of tissue paper using virgin pulp (virgin fiber or waste paper pulp (recycled fiber. This comparison is based on the materials and energy used as well as emissions and waste resulting from the production of tissue paper. Life cycle assessment (LCA, ReCiPe method, was chosen as the analysis tool. The results of the research proved that electricity has the most considerable participation in the overall environmental impacts in both production processes, followed by either virgin pulp or heat. Consequently, these two production processes are the greatest contributors to the following midpoint environmental impact categories: human toxicity, climate change, human health and ecosystems, and fossil depletion. The analysis based on endpoint impact categories proved that the production process based on waste paper is more environmentally friendly than the one based on virgin pulp in all impact categories: human health, ecosystems, resources. This is largely because of its lower material and energy requirements in the entire life cycle. Due to the fact that the tissue paper is the final use of fiber, using recycled waste paper is strongly recommended. The obtained research results are a valuable source of management information for the decision makers at both company and national levels required to improve the environmental performance of tissue paper production.

  5. Using Facebook ads with traditional paper mailings to recruit adolescent girls for a clinical trial.

    Science.gov (United States)

    Schwinn, Traci; Hopkins, Jessica; Schinke, Steven P; Liu, Xiang

    2017-02-01

    Clinical trials require sufficient samples recruited within limited time and budget constraints. Trials with minors are additionally burdened by the requirement for youth assent and parental permission. This paper details the use of Facebook ads and traditional paper mailings to enroll 797 adolescent girls for a longitudinal, web-based, drug abuse prevention trial. Data on sample representativeness and retention are also provided. Facebook ads appeared on the pages of females aged 13 or 14years who reside in the U.S. Ads linked girls to a recruitment website. Girls who wanted more information submitted contact information and were mailed information packets to their homes containing, among other things, youth assent and parent permission forms. Returned forms were verified for accuracy and validity. The Facebook ad campaign reached 2,267,848 girls and had a unique click-through rate of 3.0%. The campaign cost $41,202.37 with an average cost of $51.70 per enrolled girl. Information packets were mailed to 1,873 girls. Approximately one-half of girls returned the forms, and 797 girls were enrolled. The Facebook campaign's success varied by ad type, month, and day of the week. Baseline data revealed comparability to national data on demographic and substance use variables. Results suggest that Facebook ads provide a useful initial point of access to unparalleled numbers of adolescents. Clinical trials may benefit from a two-fold recruitment strategy that uses online ads to attract interested adolescents followed by traditional recruitment methods to communicate detailed information to adolescents and parents. Copyright © 2016 Elsevier Ltd. All rights reserved.

  6. Rabi N. Bhattacharya selected papers

    CERN Document Server

    Waymire, Edward

    2016-01-01

    This volume presents some of the most influential papers published by Rabi N. Bhattacharya, along with commentaries from international experts, demonstrating his knowledge, insight, and influence in the field of probability and its applications. For more than three decades, Bhattacharya has made significant contributions in areas ranging from theoretical statistics via analytical probability theory, Markov processes, and random dynamics to applied topics in statistics, economics, and geophysics. Selected reprints of Bhattacharya’s papers are divided into three sections: Modes of Approximation, Large Times for Markov Processes, and Stochastic Foundations in Applied Sciences. The accompanying articles by the contributing authors not only help to position his work in the context of other achievements, but also provide a unique assessment of the state of their individual fields, both historically and for the next generation of researchers. Rabi N. Bhattacharya: Selected Papers will be a valuable resource for yo...

  7. Paper-based plasma sanitizers

    Science.gov (United States)

    Xie, Jingjin; Chen, Qiang; Suresh, Poornima; Roy, Subrata; White, James F.; Mazzeo, Aaron D.

    2017-05-01

    This work describes disposable plasma generators made from metallized paper. The fabricated plasma generators with layered and patterned sheets of paper provide a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. The porosity of paper allows gas to permeate its bulk volume and fuel plasma, while plasma-induced forced convection cools the substrate. When electrically driven with oscillating peak-to-peak potentials of ±1 to ±10 kV, the paper-based devices produced both volume and surface plasmas capable of killing microbes. The plasma sanitizers deactivated greater than 99% of Saccharomyces cerevisiae and greater than 99.9% of Escherichia coli cells with 30 s of noncontact treatment. Characterization of plasma generated from the sanitizers revealed a detectable level of UV-C (1.9 nWṡcm-2ṡnm-1), modest surface temperature (60 °C with 60 s of activation), and a high level of ozone (13 ppm with 60 s of activation). These results deliver insights into the mechanisms and suitability of paper-based substrates for active antimicrobial sanitization with scalable, flexible sheets. In addition, this work shows how paper-based generators are conformable to curved surfaces, appropriate for kirigami-like “stretchy” structures, compatible with user interfaces, and suitable for sanitization of microbes aerosolized onto a surface. In general, these disposable plasma generators represent progress toward biodegradable devices based on flexible renewable materials, which may impact the future design of protective garments, skin-like sensors for robots or prosthetics, and user interfaces in contaminated environments.

  8. Paper-based plasma sanitizers.

    Science.gov (United States)

    Xie, Jingjin; Chen, Qiang; Suresh, Poornima; Roy, Subrata; White, James F; Mazzeo, Aaron D

    2017-05-16

    This work describes disposable plasma generators made from metallized paper. The fabricated plasma generators with layered and patterned sheets of paper provide a simple and flexible format for dielectric barrier discharge to create atmospheric plasma without an applied vacuum. The porosity of paper allows gas to permeate its bulk volume and fuel plasma, while plasma-induced forced convection cools the substrate. When electrically driven with oscillating peak-to-peak potentials of ±1 to ±10 kV, the paper-based devices produced both volume and surface plasmas capable of killing microbes. The plasma sanitizers deactivated greater than 99% of Saccharomyces cerevisiae and greater than 99.9% of Escherichia coli cells with 30 s of noncontact treatment. Characterization of plasma generated from the sanitizers revealed a detectable level of UV-C (1.9 nW⋅cm -2 ⋅nm -1 ), modest surface temperature (60 °C with 60 s of activation), and a high level of ozone (13 ppm with 60 s of activation). These results deliver insights into the mechanisms and suitability of paper-based substrates for active antimicrobial sanitization with scalable, flexible sheets. In addition, this work shows how paper-based generators are conformable to curved surfaces, appropriate for kirigami-like "stretchy" structures, compatible with user interfaces, and suitable for sanitization of microbes aerosolized onto a surface. In general, these disposable plasma generators represent progress toward biodegradable devices based on flexible renewable materials, which may impact the future design of protective garments, skin-like sensors for robots or prosthetics, and user interfaces in contaminated environments.

  9. Using carboxylated nanocrystalline cellulose as an additive in cellulosic paper and poly (vinyl alcohol) fiber paper.

    Science.gov (United States)

    Cha, Ruitao; Wang, Chengyu; Cheng, Shaoling; He, Zhibin; Jiang, Xingyu

    2014-09-22

    Specialty paper (e.g. cigarette paper and battery diaphragm paper) requires extremely high strength properties. The addition of strength agents plays an important role in increasing strength properties of paper. Nanocrystalline cellulose (NCC), or cellulose whiskers, has the potential to enhance the strength properties of paper via improving inter-fibers bonding. This paper was to determine the potential of using carboxylated nanocrystalline cellulose (CNCC) to improve the strength properties of paper made of cellulosic fiber or poly (vinyl alcohol) (PVA) fiber. The results indicated that the addition of CNCC can effectively improve the strength properties. At a CNCC dosage of 0.7%, the tear index and tensile index of the cellulosic paper reached the maximum of 12.8 mN m2/g and 100.7 Nm/g, respectively. More importantly, when increasing the CNCC dosage from 0.1 to 1.0%, the tear index and tensile index of PVA fiber paper were increased by 67.29%, 22.55%, respectively. Copyright © 2014 Elsevier Ltd. All rights reserved.

  10. Importance of Requirement Management : A Requirement Engineering Concern

    OpenAIRE

    Dhirendra Pandey; Vandana Pandey

    2012-01-01

    Requirement engineering is first phase of software development processes and it is most important phase for every software development model. In requirement engineering phase we can gather the requirements from user and use this requirement to software development and produce software product that satisfy the user needs. In this research paper we describe the fundamental description of requirement engineering and present the basics dimensions of requirement engineering. Also, in this research...

  11. Deformable paper origami optoelectronic devices

    KAUST Repository

    He, Jr-Hau

    2017-01-19

    Deformable optoelectronic devices are provided, including photodetectors, photodiodes, and photovoltaic cells. The devices can be made on a variety of paper substrates, and can include a plurality of fold segments in the paper substrate creating a deformable pattern. Thin electrode layers and semiconductor nanowire layers can be attached to the substrate, creating the optoelectronic device. The devices can be highly deformable, e.g. capable of undergoing strains of 500% or more, bending angles of 25° or more, and/or twist angles of 270° or more. Methods of making the deformable optoelectronic devices and methods of using, e.g. as a photodetector, are also provided.

  12. Degradation studies on plasticized PVC films submited to gamma radiation

    Directory of Open Access Journals (Sweden)

    Vinhas Glória Maria

    2003-01-01

    Full Text Available Poly (vinyl chloride, PVC, is a rigid polymer and for several of its applications must be compounded with plasticizing agents. The plasticizers minimize the dipolar interactions, which exist between the polymer's chains, promoting their mobility. In this work we studied the properties of PVC/plasticizer systems submitted to different doses of gamma radiation. We have used four commercial plasticizers amongt them di(2-ethylhexyl phthalate, DEHP, which is present in a great number of commercial applications. The PVC/plasticizer systems have been studied as films made by the solvent evaporation technique. Irradiated and non-irradiated films have been characterized by viscosimetric analysis, mechanical essays and infrared spectroscopy. The results have shown that the rigid, non plasticized, PVC film presented the greatest degradation index, while among the plasticized films the one which presented the larger degradation index due to chain scission was the DEHP plasticized PVC.

  13. Believing Badly | Cox | Philosophical Papers

    African Journals Online (AJOL)

    Believing Badly. Damian Cox, Michael Levine. Abstract. This paper explores the grounds upon which moral judgment of a person's beliefs is properly made. The beliefs in question are non-moral beliefs and the objects of moral judgment are individual instances of believing. We argue that instances of believing may be ...

  14. Fifteen papers on functional analysis

    CERN Document Server

    Allakhverdiev, B P; Fainshtein, A S; Khelemskii, AYa; Klenina, LI

    1984-01-01

    The papers in this volume cover topics on functional analysis. They have been selected, translated, and edited from publications not otherwise translated into English under the auspices of the AMS-ASL-IMS Committee on Translations from Russian and Other Foreign Languages.

  15. Eleven papers on differential equations

    CERN Document Server

    Akhmedov, S A; Berezanskii, Yu M; Bazalii, B V; Berezanskii, Yu M

    1985-01-01

    The papers in this volume, like those in the previous one, have been selected, translated, and edited from publications not otherwise translated into English under the auspices of the AMS-ASL-IMS Committee on Translations from Russian and Other Foreign Languages.

  16. Overview paper on nuclear power

    Energy Technology Data Exchange (ETDEWEB)

    Spiewak, I.; Cope, D.F.

    1980-09-01

    This paper was prepared as an input to ORNL's Strategic Planning Activity, ORNL National Energy Perspective (ONEP). It is intended to provide historical background on nuclear power, an analysis of the mission of nuclear power, a discussion of the issues, the technology choices, and the suggestion of a strategy for encouraging further growth of nuclear power.

  17. Nerdfighters, "Paper Towns," and heterotopia

    Directory of Open Access Journals (Sweden)

    Lili Wilkinson

    2012-06-01

    Full Text Available Socially and politically controlled teenagers find emancipatory spaces in young adult (YA literature, spaces where institutions can be challenged and individuals can gain agency and empowerment. Drawing on Foucault's theory of heterotopia, I examine the literary spaces in John Green's YA novel Paper Towns and examine how Green's online social networking community Nerdfighters shares an ideological common ground with the novel.

  18. COLLECTED PAPERS OF SRINIVASA RAMANUJAN

    Indian Academy of Sciences (India)

    Home; Journals; Resonance – Journal of Science Education; Volume 18; Issue 9. Collected Papers of Srinivasa Ramanujan. J E Littlewood. Classics Volume 18 Issue 9 September 2013 pp 859-865. Fulltext. Click here to view fulltext PDF. Permanent link: http://www.ias.ac.in/article/fulltext/reso/018/09/0859-0865 ...

  19. Time to Terminate Toilet Papering

    Science.gov (United States)

    Moscinski, David

    2008-01-01

    Each September in Wisconsin students return to school, football games draw enthusiastic crowds, and homecoming week is celebrated. Trees lose their leaves only to be re-adorned in white in that generation bridging tradition known as toilet papering. Community residents have differing opinions on "tp"ing, in large part determined by whether they…

  20. Paper mechanisms for sonic interaction

    DEFF Research Database (Denmark)

    Delle Monache, Stefano; Rocchesso, Davide; Qi, Ji

    2012-01-01

    Introducing continuous sonic interaction in augmented pop-up books enhances the expressive and performative qualities of movables, making the whole narrative experience more engaging and personal. The SaMPL Spring School on Sounding Popables explored the specific topic of paper-driven sonic...

  1. Gas Mitigation in Paper Production

    Science.gov (United States)

    Santos, AS; Bittencourt, C.

    2017-07-01

    The Brazilian paper industry has competitive advantages offered by the favorable climate, which favors an increase in the yield of forest restoration, and consequently, in the productive process. On the other hand, following the greenhouse gases (GHG), we can see our constantly changing sun, causing the solar storms, allowing their prevention or mitigating measures. The objective of this work is to contribute to the construction of the understanding necessary for the reduction of GHG emission from a preliminary analysis of the pulp and paper sector. As a secondary objective, the text preliminarily analyzes a company’s behavior against the backdrop of the Paris Accord, which strengthens the global response to the threat of climate change and strengthens the capacity of countries to deal with the impacts of such changes. The identification of best practices in the pulp and paper industry is understood, focusing on environmental sustainability, such as the adoption of reforestation, obtaining significant results. In the case of the paper industry, the management of public forests for sustainable production, within the structure of the Ministry of the Environment, establishes the promotion of public awareness about the importance of conservation, recovery and sustainable management of forest resources.

  2. Architecture-Driven Requirements Engineering

    NARCIS (Netherlands)

    Engelsman, W.; Jonkers, Henk; Franken, H.M.; Franken, Henry M.; Iacob, Maria Eugenia; Proper, Erik; Harmsen, Frank; Dietz, Jan L.G.

    2009-01-01

    This paper presents an architecture driven requirements engineering method. We will demonstrate how to integrate requirements engineering in architecture design and we will demonstrate how to use enterprise architectures during solution realization projects. We will demonstrate how architecture can

  3. Call for Papers: Special Issue

    African Journals Online (AJOL)

    social networking sites like Twitter and Facebook in addition to Wikipedia and YouTube in which visitors can contribute to the content of the web sites. Previously, individuals' intention when using the Internet may simply have been to surf in order to retrieve information. Such a one-way communication facility requires little ...

  4. Software requirements

    CERN Document Server

    Wiegers, Karl E

    2003-01-01

    Without formal, verifiable software requirements-and an effective system for managing them-the programs that developers think they've agreed to build often will not be the same products their customers are expecting. In SOFTWARE REQUIREMENTS, Second Edition, requirements engineering authority Karl Wiegers amplifies the best practices presented in his original award-winning text?now a mainstay for anyone participating in the software development process. In this book, you'll discover effective techniques for managing the requirements engineering process all the way through the development cy

  5. Line Creep in Paper Peeling

    Directory of Open Access Journals (Sweden)

    Rosti J.

    2010-06-01

    Full Text Available We have studied experimentally the dynamics of the separation of a sheet of paper into two halves in a peeling configuration. The experimental setup consists of a peeling device, where a fracture front is driven along the plane of the paper, with a constant force. The theoretical picture is how an elastic line interacts with a random landscape of fracture toughness. We compare the results with theoretical simulations in several aspects. One recent finding concerns the autocorrelation function of the average front position. The data from the experiments produces so-called cusps or singularities in the correlation function, as predicted by the functional renormalization group theory for elastic lines. Comparisons with simulations with either a short range or a long range elastic kernel demonstrate that the latter agrees with the experimental observations, as expected.

  6. 7 CFR 1724.30 - Borrowers' requirements-engineering services.

    Science.gov (United States)

    2010-01-01

    ... qualification information need not be submitted to RUS unless specifically requested by RUS on a case by case... instruments pertaining to the engineering details required by RUS. (e) Additional requirements related to appropriate seismic safety measures are contained in part 1792, subpart C, of this chapter, Seismic Safety of...

  7. 20 CFR 209.3 - Social security number required.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 1 2010-04-01 2010-04-01 false Social security number required. 209.3... RAILROAD EMPLOYERS' REPORTS AND RESPONSIBILITIES § 209.3 Social security number required. Each employer shall furnish to the Board a social security number for each employee for whom any report is submitted...

  8. 30 CFR 943.16 - Required program amendments.

    Science.gov (United States)

    2010-07-01

    ....16 Mineral Resources OFFICE OF SURFACE MINING RECLAMATION AND ENFORCEMENT, DEPARTMENT OF THE INTERIOR PROGRAMS FOR THE CONDUCT OF SURFACE MINING OPERATIONS WITHIN EACH STATE TEXAS § 943.16 Required program amendments. Pursuant to 30 CFR 732.17(f)(1), Texas is required to submit to OSM by the specified date the...

  9. 46 CFR 252.23 - Financial and other reporting requirements.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 8 2010-10-01 2010-10-01 false Financial and other reporting requirements. 252.23... SERVICES Operation § 252.23 Financial and other reporting requirements. (a) Voyage report. The operator... total loss covered by a policy of insurance. (d) Financial statements. The operator shall submit, in...

  10. Center for Beam Physics papers

    Energy Technology Data Exchange (ETDEWEB)

    Sessler, A.M. [ed.

    1996-06-01

    Six papers are included in this collection. They cover: a second interaction region for gamma-gamma, gamma-electron and electron- electron collisions; constraints on laser-driven accelerators for a high-energy linear collider; progress on the design of a high luminosity muon-muon collider; RF power source development at the RTA test facility; sensitivity studies of crystalline beams; and single bunch collective effects in muon colliders.

  11. Construction-Paper Puzzle Masterpieces

    Science.gov (United States)

    Vance, Shelly

    2010-01-01

    Creating an appreciation of art history in her junior-high students has always been one of the author's greatest challenges as an art teacher. In this article, the author describes how her eighth-grade students re-created a famous work of art--piece by piece, like a puzzle or a stained-glass window--out of construction paper. (Contains 1 resource.)

  12. Supplementation with vitamin A enhances oxidative stress in the lungs of rats submitted to aerobic exercise.

    Science.gov (United States)

    Gasparotto, Juciano; Petiz, Lyvia Lintzmaier; Girardi, Carolina Saibro; Bortolin, Rafael Calixto; de Vargas, Amanda Rodrigues; Henkin, Bernardo Saldanha; Chaves, Paloma Rodrigues; Roncato, Sabrina; Matté, Cristiane; Zanotto-Filho, Alfeu; Moreira, José Cláudio Fonseca; Gelain, Daniel Pens

    2015-12-01

    Exercise training induces reactive oxygen species production and low levels of oxidative damage, which are required for induction of antioxidant defenses and tissue adaptation. This process is physiological and essential to improve physical conditioning and performance. During exercise, endogenous antioxidants are recruited to prevent excessive oxidative stress, demanding appropriate intake of antioxidants from diet or supplements; in this context, the search for vitamin supplements that enhance the antioxidant defenses and improve exercise performance has been continuously increasing. On the other hand, excess of antioxidants may hinder the pro-oxidant signals necessary for this process of adaptation. The aim of this study was to investigate the effects of vitamin A supplementation (2000 IU/kg, oral) upon oxidative stress and parameters of pro-inflammatory signaling in lungs of rats submitted to aerobic exercise (swimming protocol). When combined with exercise, vitamin A inhibited biochemical parameters of adaptation/conditioning by attenuating exercise-induced antioxidant enzymes (superoxide dismutase and glutathione peroxidase) and decreasing the content of the receptor for advanced glycation end-products. Increased oxidative damage to proteins (carbonylation) and lipids (lipoperoxidation) was also observed in these animals. In sedentary animals, vitamin A decreased superoxide dismutase and increased lipoperoxidation. Vitamin A also enhanced the levels of tumor necrosis factor alpha and decreased interleukin-10, effects partially reversed by aerobic training. Taken together, the results presented herein point to negative effects associated with vitamin A supplementation at the specific dose here used upon oxidative stress and pro-inflammatory cytokines in lung tissues of rats submitted to aerobic exercise.

  13. Simulator Fidelity: A Concept Paper

    Science.gov (United States)

    1980-11-01

    training programs, it should be possible to screen out those trainees who do not possess the required abilities to benefit from a given training program...Iq5LQ.H AIIN: AIiLA-LSi I (IS AotMY AYN NO~i LIbRARY AITN: 4LMI&1 LIHI44AHIA14 I USAAu’fJC ATTN.- ATIU-U I iUS t4iLlIAHy ACAI ~t.Y UIHLLIUI4 01

  14. Energy requirements

    NARCIS (Netherlands)

    Hulzebos, Christian V.; Sauer, Pieter J. J.

    The determination of the appropriate energy and nutritional requirements of a newborn infant requires a clear goal of the energy and other compounds to be administered, valid methods to measure energy balance and body composition, and knowledge of the neonatal metabolic capacities. Providing an

  15. 78 FR 13053 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request...

    Science.gov (United States)

    2013-02-26

    ... Department of Justice for enforcement purposes. Non-confidential business information submitted by... 1033, Subpart F). Estimated number of respondents: 16 (total). Frequency of response: Quarterly...

  16. The Carbon Footprint of Conference Papers.

    Directory of Open Access Journals (Sweden)

    Diomidis Spinellis

    Full Text Available The action required to stem the environmental and social implications of climate change depends crucially on how humankind shapes technology, economy, lifestyle and policy. With transport CO2 emissions accounting for about a quarter of the total, we examine the contribution of CO2 output by scientific travel. Thankfully for the reputation of the scientific community, CO2 emissions associated with the trips required to present a paper at a scientific conference account for just 0.003% of the yearly total. However, with CO2 emissions for a single conference trip amounting to 7% of an average individual's total CO2 emissions, scientists should lead by example by demonstrating leadership in addressing the issue.

  17. PSD Applicability Pulp and Paper Mill

    Science.gov (United States)

    This document may be of assistance in applying the New Source Review (NSR) air permitting regulations including the Prevention of Significant Deterioration (PSD) requirements. This document is part of the NSR Policy and Guidance Database. Some documents in the database are a scanned or retyped version of a paper photocopy of the original. Although we have taken considerable effort to quality assure the documents, some may contain typographical errors. Contact the office that issued the document if you need a copy of the original.

  18. Writing academic papers: lost in translation?

    Science.gov (United States)

    Grant, Maria J

    2011-12-01

    The process of writing for publication is a challenging one. It moves us from the spoken and written word into a realm that requires us to provide supporting evidence to develop an argument in a logical and progressive way. In English language journals, as elsewhere, the quality of the written word is a determining factor in the likelihood of a paper being accepted for publication. By reading past issues of a targeted journal, drawing on the expertise of colleagues and responding positively to feedback, it is possible to significantly enhance your prospects of publication. © 2011 The authors. Health Information and Libraries Journal © 2011 Health Libraries Group.

  19. Published papers on telepathology projects

    Directory of Open Access Journals (Sweden)

    Sadrieh Hajesmaeel-Gohari

    2015-10-01

    Full Text Available Introduction: Although many studies have been conducted in the telepathology field in recent years, a systematic review that examines studies in a comparative manner has not yet been undertaken. This paper aims to review the published papers on telepathology projects and compare them in several aspects such as telepathology method,telecommunication method, clinical outcome, etc. Method: This is a systematic review study. PubMed database was used to find the studies published in the past ten years (2004–2014. The 71 final related papers were evaluated. Data were extracted from these studies based on the following items: country, national (in country or international (between countries, frozen section or slide, body part, type of camera used, telecommunication method, telepathology method, clinical outcome, cost evaluation, satisfaction evaluation and the description of consultation providers and receivers. Data were analyzed using descriptive analysis. Results: Results showed that most of the studies were performed in developed countries on a national level, on slide and on a specific body part. In most studies, a Nikon camera was used to take images. Online methods were the most used telecommunication method in the studies, while store and forward was the most used telepathology method. Clinical outcome of many studies showed that telepathology is a reliable and accurate method for consultation. More than half of the studies considered the cost, and most of them showed that a telepathology system is cost effective. Few studies evaluated satisfaction of the participants. In most studies, the telepathology project was undertaken between pathologists. Conclusion: Although there is enough evidence to suggest that telepathology is an effective way of consultation between pathologists, there are still some areas that should be addressed and for which there is a lack of convincing evidence. For example, pathologist satisfaction, cost evaluation

  20. Relativity on Rotated Graph Paper

    CERN Document Server

    Salgado, Roberto B

    2011-01-01

    We present visual calculations in special relativity using spacetime diagrams drawn on graph paper that has been rotated by 45 degrees. The rotated lines represent lightlike directions in Minkowski spacetime, and the boxes in the grid (called "light-clock diamonds") represent units of measurement modeled on the ticks of an inertial observer's lightclock. We show that many quantitative results can be read off a spacetime diagram by counting boxes, using a minimal amount of algebra. We use the Doppler Effect, in the spirit of the Bondi k-calculus, to motivate the method.

  1. Perioperative fasting time among cancer patients submitted to gastrointestinal surgeries.

    Science.gov (United States)

    Pereira, Nayara de Castro; Turrini, Ruth Natalia Teresa; Poveda, Vanessa de Brito

    2017-05-25

    To identify the length of perioperative fasting among patients submitted to gastrointestinal cancer surgeries. Retrospective cohort study, developed by consulting the medical records of 128 patients submitted to gastrointestinal cancer surgeries. The mean of total length of fasting was 107.6 hours. The total length of fasting was significantly associated with the number of symptoms presented before (p=0.000) and after the surgery (p=0.007), the length of hospital stay (p=0.000), blood transfusion (p=0.013), nasogastric tube (p=0.001) and nasojejunal tube (p=0,003), postoperative admission at ICU (p=0.002), postoperative death (p=0.000) and length of preoperative fasting (p=0.000). The length of fasting is associated with complications that affect the quality of the patients' postoperative recovery and nurses' work. The nursing team should be alert to this aspect and being responsible for overseeing the patients' interest, should not permit the unnecessary extension of fasting. Identificar la duración del ayuno perioperatorio entre los pacientes sometidos a cirugías de cáncer gastrointestinal. Estudio de cohorte retrospectivo, por consulta de los registros médicos de 128 pacientes sometidos a cirugías de cáncer gastrointestinal. La media de la duración total del ayuno fue de 107,6 horas. La duración total del ayuno se asoció significativamente con el número de síntomas presentados antes (p=0,000) y después de la cirugía (p=0,007), la duración de la estancia hospitalaria (p=0,000), transfusión de sangre (p=0,013),tubo nasogástrico (P=0,003), ingreso postoperatorio en la UCI (p=0,002), muerte postoperatoria (p=0,000) y duración del ayuno preoperatorio (p=0,000). La duración del ayuno se asocia con complicaciones que afectan la calidad de la recuperación postoperatoria de los pacientes y el trabajo de enfermería. El equipo de enfermería debe estar alerta en relación a este aspecto y ser responsable de supervisar el interés de los pacientes, no

  2. Modeling the methane hydrate formation in an aqueous film submitted to steady cooling

    Energy Technology Data Exchange (ETDEWEB)

    Avendano-Gomez, J.R. [ESIQIE, Laboratorio de Ingenieria Quimica Ambiental, Mexico (Mexico). Inst. Politecnico Nacional; Garcia-Sanchez, F. [Laboratorio de Termodinamica, Mexico (Mexico). Inst. Mexicano del Petroleo; Gurrola, D.V. [UPIBI, Laboratorio de Diseno de Plantas, Mexico (Mexico). Inst. Politecnico Nacional

    2008-07-01

    Gas hydrates, or clathrate hydrates, are ice-like compounds that results from the kinetic process of crystallization of an aqueous solution supersaturated with a dissolved gas. This paper presented a model that took into account two factors involved in the hydrate crystallization, notably the stochastic nature of crystallization that causes sub-cooling and the heat resulting from the exothermic enthalpy of hydrate formation. The purpose of this study was to model the thermal evolution inside a hydrate forming system which was submitted to an imposed steady cooling. The study system was a cylindrical thin film of aqueous solution at 19 Mpa. The study involved using methane as the hydrate forming molecule. It was assumed that methane was homogeneously dissolved in the aqueous phase. Ethane hydrate was formed through a kinetic process of nucleation and crystallization. In order to predict the onset time of nucleation, the induction time needed to be considered. This paper discussed the probability of nucleation as well as the estimation of the rate of nucleation. It also presented the mathematical model and boundary conditions. These included assumptions and derivation of the model; boundary conditions; initial conditions; and numerical solution of the model equation. It was concluded that the heat source must be considered when investigating crystallization effects. 34 refs., 2 tabs., 2 figs.

  3. The Blue Box White Paper

    CERN Document Server

    Tippett, Benjamin K

    2013-01-01

    This white paper is an explanation of Ben and Dave's TARDIS time machine, written for laypeople who are interested in time travel, but have no technical knowledge of Einstein's Theory of General Relativity. The first part of this paper is an introduction to the pertinent ideas from Einstein's theory of curved spacetime, followed by a review of other popular time machine spacetimes. We begin with an introduction to curvature and lightcones. We then explain the Alcubierre Warp Drive, the Morris-Thorne wormhole, and the Tipler cylinder. We then describe the Traversable Achronal Retrograde Domain in Spacetime (TARDIS), and explain some of its general properties. Our TARDIS is a bubble of spacetime curvature which travels along a closed loop in space and time. A person travelling within the bubble will feel a constant acceleration. A person outside of the TARDIS will see two bubbles: one which is evolving forwards in time, and one which is evolving backwards in time. We then discuss the physical limitations which ...

  4. How to Manage Rejected Scientific Papers? UNAIS as Final Solution

    Directory of Open Access Journals (Sweden)

    Alessandro Diana

    2012-07-01

    Full Text Available Before publication, biomedical papers might undergo a very complex process, from journal selection, authors’ motivations for submissions, modifications, and final publication or refusal. UNAIS (Unpublished Articles In Science is an online repository in which authors can publish previously rejected scientific articles or articles that have never been submitted for publication. At UNAIS, authors can also publish the reasons behind the refusals to publication. UNAIS is more than an e-journal: it is a scientific drop box in which scientists can find indicative and negative results, as well as ideas that can inspire others. UNAIS’s goal is also to help students and scientists who want to learn how to write scientific articles. UNAIS’ aim is to exchange and promote knowledge. Have a look on www.unais.net.

  5. Reach capacity in older women submitted to flexibility training

    Directory of Open Access Journals (Sweden)

    Elciana de Paiva Lima Vieira

    2015-11-01

    Full Text Available The aim of this study was to analyze the effect of flexibility training on the maximum range of motion levels and reach capacity of older women practitioners of aquatic exercises of the Prev-Quedas project. Participants were divided into two groups: intervention (IG, n = 25, which were submitted to flexibility training program and control (CG, n = 21, in which older women participated only in aquatic exercises. Flexibility training lasted three months with weekly frequency of two days, consisting of stretching exercises involving trunk and lower limbs performed after aquatic exercises. The stretching method used was passive static. Assessment consisted of the functional reach, lateral and goniometric tests. Statistical analysis was performed using the following tests: Shapiro-Wilk normality, ANCOVA, Pearson and Spearman correlations. Significant results for GI in gains of maximum range of motion for the right hip joint (p = 0.0025, however, the same result was not observed in other joints assessed, and there was no improvement in functional and lateral reach capacity for both groups. Significant correlations between reach capacity and range of motion in the trunk, hip and ankle were not observed. Therefore, flexibility training associated with the practice of aquatic exercises promoted increased maximum range of motion only for the hip joint; however, improvement in the reach capacity was not observed. The practice of aquatic exercises alone did not show significant results.

  6. Quality of life in patients submitted to radical prostatectomy

    Directory of Open Access Journals (Sweden)

    Débora Moura Miranda Goluart

    2014-09-01

    Full Text Available A cross-sectional study with a descriptive analysis of 81 patients submitted to radical prostatectomy (RP. Our objective was to correlate quality of life (QL according to the EORTC-QLQ C30 with age group and time after surgery. Mean age was 65.7 years. Most sought the care of urology, asymptomatic. Some referred former smoking (49.9% and high blood pressure (53.1%. Mean preoperative SBP was 8.4 ng/ml. Most participants were in stages T2c to T3, Gleason ?6 and over a year after surgery. Erectile dysfunction presented in 90.1%, and urinary incontinence in 33.3%. Functional and overall health scales presented high QL indexes, and symptomatology, with low ones. Older adults presented higher QL regarding emotional functioning, financial difficulties and overall health, as well as those with over a year after surgery, regarding cognitive functioning and fatigue. Although QL was not greatly affected, there were differences between age groups and time after surgery. doi: 10.5216/ree.v16i3.21589.

  7. Object technology: A white paper

    Energy Technology Data Exchange (ETDEWEB)

    Jordan, S.R.; Arrowood, L.F.; Cain, W.D.; Stephens, W.M.; Vickers, B.D.

    1992-05-11

    Object-Oriented Technology (OOT), although not a new paradigm, has recently been prominently featured in the trade press and even general business publications. Indeed, the promises of object technology are alluring: the ability to handle complex design and engineering information through the full manufacturing production life cycle or to manipulate multimedia information, and the ability to improve programmer productivity in creating and maintaining high quality software. Groups at a number of the DOE facilities have been exploring the use of object technology for engineering, business, and other applications. In this white paper, the technology is explored thoroughly and compared with previous means of developing software and storing databases of information. Several specific projects within the DOE Complex are described, and the state of the commercial marketplace is indicated.

  8. COINCO Strategy 2025 - Discussion Paper

    DEFF Research Database (Denmark)

    Jespersen, Per Homann; Jensen, Anne; Stroschein, Christoph

     The regions and cities in the COINCO-corridor Oslo-Göteborg-Malmö-Copenhagen-Berlin have worked out a strategy proposal which is presented in this discussion paper. Behind the strategy is a political will to utilize mutual strengths and together become a leading player in a globalized world, based...... on common cultural, social and environmental values. The strategy comprises of a vision and more detailed aims and actions within three different areas: Corridor infrastructure, Innovation and Cooperation. In this way, the COINCO partners want to establish a political platform for transborder collaboration...... companies in the corridor, attracting innovative international companies, and supporting the creation of new knowledge intensive businesses is thus at the core of the strategy. New areas of collaboration will have to be identified systematically. Cooperation among COINCO businesses have...

  9. 78 FR 9447 - Reporting and Recordkeeping Requirements; 8(a) Annual Update

    Science.gov (United States)

    2013-02-08

    ... From the Federal Register Online via the Government Publishing Office SMALL BUSINESS.... The public is encouraged to submit written comments on this proposed information collection. DATES... information including tax returns, as well as the notification requirements concerning transferred assets...

  10. 77 FR 14505 - Proposed Information Collection; Comment Request; Gear-Marking Requirement for Atlantic Large...

    Science.gov (United States)

    2012-03-12

    ... required to paint or otherwise mark their gear with one or two color codes, designating the type of gear... techniques or other forms of information technology. Comments submitted in response to this notice will be...

  11. Exploring Reviewer Reactions to Manuscripts Submitted to Academic Journals

    Science.gov (United States)

    Coniam, David

    2012-01-01

    This paper extends a previous study (Coniam, 2011) into a corpus of manuscript (MS) reviews conducted for the journal System by one reviewer in the eight-year period 2003-2011. The current paper highlights additional facets of the review process that focus on issues involving authors themselves. The study examines two related sets of research…

  12. Bibliometric Analysis of MBA Dissertations Submitted at the Open ...

    African Journals Online (AJOL)

    This paper examined the citation pattern used by MBA students at the Open University of Tanzania. References from a sample of one hundred MBA dissertations from the period of 2008-2011 were examined. Specifically, the paper examined the type of sources cited, age of the cited sources, authorship pattern, ...

  13. Creativity in Requirement Identification

    DEFF Research Database (Denmark)

    Sørensen, Lene Tolstrup; Olesen, Henning

    Traditional requirements engineering focuses mainly on analysis and elicitation. However, current trends in new system, device and software are towards involving all stakeholders in the early stages of the engineering process to define the user requirements. Creativity is here seen as a major...... keystone in this process in order to open up stakeholder's mind to new technologies, which do not yet exist. This paper dis-cusses the application of creativity in the requirements process and illustrate through cases from the MAGNET and MAGNET Beyond projects....

  14. 32 CFR 1621.2 - Duty to report for and submit to induction.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 6 2010-07-01 2010-07-01 false Duty to report for and submit to induction. 1621... SYSTEM DUTY OF REGISTRANTS § 1621.2 Duty to report for and submit to induction. When the Director of Selective Service orders a registrant for induction, it shall be the duty of the registrant to report for...

  15. 30 CFR 250.285 - How do I submit revised and supplemental EPs, DPPs, and DOCDs?

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 2 2010-07-01 2010-07-01 false How do I submit revised and supplemental EPs... supplemental EPs, DPPs, and DOCDs? (a) Submittal. You must submit to the Regional Supervisor any revisions and supplements to approved EPs, DPPs, or DOCDs for approval, whether you initiate them or the Regional Supervisor...

  16. 75 FR 60404 - Information Collection Request Submitted to Office of Management and Budget

    Science.gov (United States)

    2010-09-30

    ...; ] ADMINISTRATIVE CONFERENCE OF THE UNITED STATES Information Collection Request Submitted to Office of Management... United States will submit an Information Collection Request (ICR) to the Office of Management and Budget (OMB) requesting approval for the following collection of information: 3002-0003, Substitute...

  17. 20 CFR 405.331 - Submitting evidence to an administrative law judge.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Submitting evidence to an administrative law judge. 405.331 Section 405.331 Employees' Benefits SOCIAL SECURITY ADMINISTRATION ADMINISTRATIVE REVIEW PROCESS FOR ADJUDICATING INITIAL DISABILITY CLAIMS Administrative Law Judge Hearing § 405.331 Submitting...

  18. 27 CFR 73.34 - When is an electronically submitted form considered timely filed?

    Science.gov (United States)

    2010-04-01

    ... AND TOBACCO TAX AND TRADE BUREAU, DEPARTMENT OF THE TREASURY (CONTINUED) PROCEDURES AND PRACTICES ELECTRONIC SIGNATURES; ELECTRONIC SUBMISSION OF FORMS Electronic Filing of Documents with TTB § 73.34 When is an electronically submitted form considered timely filed? If you submit a form to our electronic...

  19. 13 CFR 126.303 - Where must a concern submit its application and certification?

    Science.gov (United States)

    2010-01-01

    ... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false Where must a concern submit its application and certification? 126.303 Section 126.303 Business Credit and Assistance SMALL BUSINESS... certification? A concern seeking certification as a HUBZone SBC must submit either an electronic application to...

  20. 40 CFR 60.2755 - When must I submit my waste management plan?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 6 2010-07-01 2010-07-01 false When must I submit my waste management... waste management plan? You must submit the waste management plan no later than the date specified in... Compliance Times for Commercial and Industrial Solid Waste Incineration Units that Commenced Construction On...

  1. 44 CFR 65.15 - List of communities submitting new technical data.

    Science.gov (United States)

    2010-10-01

    ... Program IDENTIFICATION AND MAPPING OF SPECIAL HAZARD AREAS § 65.15 List of communities submitting new... 44 Emergency Management and Assistance 1 2010-10-01 2010-10-01 false List of communities submitting new technical data. 65.15 Section 65.15 Emergency Management and Assistance FEDERAL EMERGENCY...

  2. 76 FR 28192 - Petition for Rulemaking Submitted by the Nuclear Energy Institute

    Science.gov (United States)

    2011-05-16

    ... From the Federal Register Online via the Government Publishing Office NUCLEAR REGULATORY COMMISSION 10 CFR Part 26 Petition for Rulemaking Submitted by the Nuclear Energy Institute AGENCY: Nuclear... rulemaking (PRM) submitted by Anthony R. Pietrangelo, on behalf of the Nuclear Energy Institute (NEI), the...

  3. 20 CFR 661.430 - Under what conditions may the Governor submit a Workforce Flexibility Plan?

    Science.gov (United States)

    2010-04-01

    ... a Workforce Flexibility Plan? 661.430 Section 661.430 Employees' Benefits EMPLOYMENT AND TRAINING... the Governor submit a Workforce Flexibility Plan? (a) A State may submit to the Secretary, and the Secretary may approve, a workforce flexibility (work-flex) plan under which the State is authorized to waive...

  4. 77 FR 28401 - Information Collection Activities: Legacy Data Verification Process (LDVP); Submitted for Office...

    Science.gov (United States)

    2012-05-14

    ... Verification Process (LDVP); Submitted for Office of Management and Budget (OMB) Review; Comment Request ACTION... comments on a collection of information that we will submit to the Office of Management and Budget (OMB... to January 2000 that do not have an assigned API number. This notice announces our intention to...

  5. 36 CFR 1206.86 - What additional materials must I submit with the final narrative report?

    Science.gov (United States)

    2010-07-01

    ... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What additional materials must I submit with the final narrative report? 1206.86 Section 1206.86 Parks, Forests, and Public... narrative report? You must submit the materials determined by the Commission as found in the NHPRC grant...

  6. Course Factors That Motivate Students to Submit End-of-Course Evaluations

    Science.gov (United States)

    Jaquett, Caroline M.; VanMaaren, Victoria G.; Williams, Robert L.

    2017-01-01

    We surveyed students (N = 152) in several sections of an undergraduate educational psychology course to determine what course factors would most motivate them to submit course evaluations. The survey directed students to choose among several pairs of course characteristics as to their relative impact on their decision to submit a course…

  7. 34 CFR 86.6 - When must an IHE submit a drug prevention program certification?

    Science.gov (United States)

    2010-07-01

    ... ABUSE PREVENTION General § 86.6 When must an IHE submit a drug prevention program certification? (a... each part of its drug prevention program, whether in effect or planned; (ii) Provides a schedule to... 34 Education 1 2010-07-01 2010-07-01 false When must an IHE submit a drug prevention program...

  8. 21 CFR 720.7 - Notification of person submitting cosmetic product ingredient statement.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 7 2010-04-01 2010-04-01 false Notification of person submitting cosmetic product... AND HUMAN SERVICES (CONTINUED) COSMETICS VOLUNTARY FILING OF COSMETIC PRODUCT INGREDIENT COMPOSITION STATEMENTS § 720.7 Notification of person submitting cosmetic product ingredient statement. When Form FDA...

  9. 77 FR 25104 - Petition for Rulemaking; Submitted by the Natural Resources Defense Council, Inc.

    Science.gov (United States)

    2012-04-27

    ... COMMISSION 10 CFR Part 50 Petition for Rulemaking; Submitted by the Natural Resources Defense Council, Inc... raised in the petition for rulemaking (PRM), PRM-50-102, submitted by the Natural Resources Defense... the NRC's PDR reference staff at 1-800-397-4209, 301-415-4737, or by email to PDR.resource@nrc.gov...

  10. 78 FR 44034 - Petition for Rulemaking Submitted by the Natural Resources Defense Council, Inc.

    Science.gov (United States)

    2013-07-23

    ...; ] NUCLEAR REGULATORY COMMISSION 10 CFR Part 50 Petition for Rulemaking Submitted by the Natural Resources... issues raised in the petition for rulemaking (PRM), PRM-50-100, submitted by the Natural Resources...- 4209, 301-415-4737, or by email to PDR.Resource@nrc.gov . The ADAMS accession number for each document...

  11. Wet paper codes with improved embedding efficiency

    Science.gov (United States)

    Fridrich, Jessica; Goljan, Miroslav; Soukal, David

    2006-02-01

    Construction of steganographic schemes in which the sender and the receiver do not share the knowledge about the location of embedding changes requires wet paper codes. Steganography with non-shared selection channels empowers the sender as now he is able to embed secret data by utilizing arbitrary side information, including a high-resolution version of the cover object (perturbed quantization steganography), local properties of the cover (adaptive steganography), and even pure randomness, e.g., coin flipping, for public key steganography. In this paper, we propose a new approach to wet paper codes using random linear codes of small codimension that at the same time improves the embedding efficiency-the number of message bits embedded per embedding change. We describe a practical algorithm, test its performance experimentally, and compare the results to theoretically achievable bounds. We point out an interesting ripple phenomenon that should be taken into account by practitioners. The proposed coding method can be modularly combined with most steganographic schemes to allow them to use non-shared selection channels and, at the same time, improve their security by decreasing the number of embedding changes.

  12. Can Paper and Adhesive alone Sustain Damaging Populations of Booklice?

    Directory of Open Access Journals (Sweden)

    Paul Walter Charles Green

    2015-03-01

    Full Text Available Booklice ('Liposcelis bostrychophila' are pests in museums and libraries, but it is not known whether a population can build up on paper and adhesives alone in the absence of any other significant nutrient sources. Insects were reared on incubated cellulose paper, either alone or combined with different adhesives, in order to observe if any of these conditions could support population growth. A comparison was also made with insects reared on samples of paper combined with a diet mixture used to culture booklice.  Changes in the physical condition of each paper were additionally noted.  The paper with diet mixture exhibited significant population increase (6142 per cent after 49 days. The paper alone and the combinations of paper and adhesives were not able to support population growth, although the proportions of insects surviving after ten months differed, with the paper alone and paper in combination with proprietary starch-based glue (SBG maintaining the greatest proportions of surviving insects. The paper and adhesives had become discoloured and brittle in all of the combinations tested, although there was very little visible evidence of fungal growth outside of the control groups (paper alone. Chemical indicators of paper degradation were not detected in extracts of incubated paper (paper alone. Controlled atmospheres, good housekeeping and close monitoring of the most vulnerable collections are key to preventing infestations of 'Liposcelis bostrychophila'. Further work is required to study the effects of a more diverse range of paper and adhesive combinations.

  13. 76 FR 76322 - Petition for Rulemaking Submitted by Sherwood Martinelli

    Science.gov (United States)

    2011-12-07

    ... challenges associated with management of State pension funds. The NEI stated that the formation of... regulations be revised to require that licensees create a financial mechanism, such as a trust fund with a... reporting requirement is not adequate to ensure the safety and adequacy of funds set aside for the...

  14. Consensus Paper: Cerebellum and Emotion.

    Science.gov (United States)

    Adamaszek, M; D'Agata, F; Ferrucci, R; Habas, C; Keulen, S; Kirkby, K C; Leggio, M; Mariën, P; Molinari, M; Moulton, E; Orsi, L; Van Overwalle, F; Papadelis, C; Priori, A; Sacchetti, B; Schutter, D J; Styliadis, C; Verhoeven, J

    2017-04-01

    Over the past three decades, insights into the role of the cerebellum in emotional processing have substantially increased. Indeed, methodological refinements in cerebellar lesion studies and major technological advancements in the field of neuroscience are in particular responsible to an exponential growth of knowledge on the topic. It is timely to review the available data and to critically evaluate the current status of the role of the cerebellum in emotion and related domains. The main aim of this article is to present an overview of current facts and ongoing debates relating to clinical, neuroimaging, and neurophysiological findings on the role of the cerebellum in key aspects of emotion. Experts in the field of cerebellar research discuss the range of cerebellar contributions to emotion in nine topics. Topics include the role of the cerebellum in perception and recognition, forwarding and encoding of emotional information, and the experience and regulation of emotional states in relation to motor, cognitive, and social behaviors. In addition, perspectives including cerebellar involvement in emotional learning, pain, emotional aspects of speech, and neuropsychiatric aspects of the cerebellum in mood disorders are briefly discussed. Results of this consensus paper illustrate how theory and empirical research have converged to produce a composite picture of brain topography, physiology, and function that establishes the role of the cerebellum in many aspects of emotional processing.

  15. Surgical site infection in patients submitted to heart transplantation.

    Science.gov (United States)

    Rodrigues, Jussara Aparecida Souza do Nascimento; Ferretti-Rebustini, Renata Eloah de Lucena; Poveda, Vanessa de Brito

    2016-08-29

    to analyze the occurrence and predisposing factors for surgical site infection in patients submitted to heart transplantation, evaluating the relationship between cases of infections and the variables related to the patient and the surgical procedure. retrospective cohort study, with review of the medical records of patients older than 18 years submitted to heart transplantation. The correlation between variables was evaluated by using Fisher's exact test and Mann-Whitney-Wilcoxon test. the sample consisted of 86 patients, predominantly men, with severe systemic disease, submitted to extensive preoperative hospitalizations. Signs of surgical site infection were observed in 9.3% of transplanted patients, with five (62.5%) superficial incisional, two (25%) deep and one (12.5%) case of organ/space infection. There was no statistically significant association between the variables related to the patient and the surgery. there was no association between the studied variables and the cases of surgical site infection, possibly due to the small number of cases of infection observed in the sample investigated. analisar a ocorrência e os fatores predisponentes para infecção de sítio cirúrgico em pacientes submetidos a transplante cardíaco e verificar a relação entre os casos de infecção e as variáveis referentes ao paciente e ao procedimento cirúrgico. estudo de coorte retrospectivo, com exame dos prontuários médicos de pacientes maiores de 18 anos, submetidos a transplante cardíaco. A correlação entre variáveis foi realizada por meio dos testes exato de Fischer e de Mann-Whitney-Wilcoxon. a amostra foi constituída por 86 pacientes, predominantemente homens, com doença sistêmica grave, submetidos a internações pré-operatórias extensas. Apresentaram sinais de infecção do sítio cirúrgico 9,3% dos transplantados, sendo cinco (62,5%) incisionais superficiais, duas (25%) profundas e um (12,5%) caso de infecção de órgão/espaço. Não houve associa

  16. White Paper Concerning Philosophy of Education and Environment

    Science.gov (United States)

    Humphreys, Chloe; Blenkinsop, Sean

    2017-01-01

    This paper begins with a recognition that questions of climate change, environmental degradation, and our relations to the natural world are increasingly significant and requiring of a response not only as philosophers of education but also as citizens of the planet. As such the paper explores five of the key journals in philosophy of education in…

  17. Waste printing paper as analogous adsorbents for heavy metals in ...

    African Journals Online (AJOL)

    user

    Waste printing paper (WPP) is an abundant local waste material that requires end-use channelling to ... alternative channel for waste paper use is underexplored. ..... Separation and. Purification. Technology, 57 (2007) 126. 16. Vieira, R.H and Volesky, B.,. International, 3 (2000) 17. 17. Rao, M. and Parwate, A.V. journal of.

  18. On "Telepathic dreams?": an unpublished paper by Robert J. Stoller.

    Science.gov (United States)

    Mayer, E L

    2001-01-01

    In 1973 Robert Stoller wrote a paper on a series of dreams-his own and his patients'--that he reluctantly found himself calling "telepathic." He never submitted the paper for publication, though he returned to the topic of unconscious communication and telepathy with increasing fascination in the years before his death. Publication of Stoller's paper seems particularly opportune just now. In it he pleads for open-minded examination of data, however alien to current scientific belief those data seem. In the past, despite numerous published reports of possibly telepathic experiences in analysis, their investigation remained relatively one-sided, since a technical posture of anonymity with patients constrained analysts from revealing that a communication struck them as telepathic. This has limited what analysts have been able to learn about the information actually exchanged, how it was exchanged, and whether the communication was experienced as uncanny by the patient. Recent attention to the intersubjective nature of the analytic situation has led to a deemphasis of anonymity, opening freer dialogue that may facilitate the rigorous investigation Stoller calls for. Such investigation may further analytic understanding of unconscious mental function and communication in the clinical setting, and lend perspective to the growing body of carefully controlled experimental research on anomalous mental phenomena.

  19. Quality theory paper writing for medical examinations.

    Science.gov (United States)

    Shukla, Samarth; Acharya, Sourya; Acharya, Neema; Shrivastava, Tripti; Kale, Anita

    2014-04-01

    Aim & Objectives: Developing a tactful paper writing skill, through delivery and depiction of the necessary expressions required for in standard or superior essay writing. Understanding relevance and tact of theoretical expression in exam paper writing Learning Indices of standard or quality theory/essay answer (SAQ/LAQ). Applying knowledge and skill gained through these theory writing exercises and assignments to achieve high or better scores in examinations. The study subjects were divided into two groups- Group A (17 students) and Group B students (10students). The students were selected from II M.B.B.S 4(th) term. Students of Group A were sensitized on how to write a theory paper and went through 4 phases namely pre-sensitization test, sensitization (imparting them with skills of good theory paper writing through home assignments and deliberations/ guidance), post-sensitization test and Evaluation. Students of Group A (17 students) undertook theory tests (twice, i.e. before and after sensitization) and Students of Group B (10 students) who were not sensitized and took the theory test with post sensitized Group A students (random 10 students). Both groups were given general pathology as the test syllabus, taught to both groups in didactic lectures during the last 6 months. The results of pre and Post-sensitization tests from both groups were analyzed. Intra group comparisons (pre sensitized Group A with Post sensitized Group A) and inter group comparisons (Non-sensitized group B with Sensitized Group A) were made. Significant results were found between results of pre and Post-sensitization tests in Group A (intra group analysis) and inter group (Group A and B) Post-sensitization tests, as there was remarkable improvement in student theory paper writing skills post sensitizing the students of Group A. Medical students should be mandatorily guided and exposed to the nuances and tact of writing the theory paper for their examinations, as it definitely gives them

  20. How do we handle self-plagiarism in submitted manuscripts?

    OpenAIRE

    Šupak Smolčić, Vesna; Bilić-Zulle, Lidija

    2013-01-01

    Self-plagiarism is a controversial issue in scientific writing and presentation of research data. Unlike plagiarism, self-plagiarism is difficult to interpret as intellectual theft under the justification that one cannot steal from oneself. However, academics are concerned, as self-plagiarized papers mislead readers, do not contribute to science, and bring undeserved credit to authors. As such, it should be considered a form of scientific misconduct. In this paper, we explain different forms ...

  1. Announcing the 2013 Measurement Science and Technology Outstanding Paper Awards

    Science.gov (United States)

    Foss, John; Dewhurst, Richard; Yacoot, Andrew; Tadigadapa, Srinivas; Peters, Kara

    2014-07-01

    Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believe that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards'. This year awards were presented in the areas of Fluid Mechanics, Measurement Science, Precision Measurement, Sensors and Sensing Systems, and Optical and Laser-based Techniques. Although the categories mirror subject sections in the journal, the Editorial Board consider articles from all categories in the selection process. 2013 Award Winner—Fluid Mechanics Extraction of skin-friction fields from surface flow visualizations Tianshu Liu Department of Mechanical and Aerospace Engineering, Western Michigan University, Kalamazoo, MI 49008, USA The skin friction or wall shear stress, τ w, for a wall bounded turbulent flow is a quantity of fundamental importance. It is the basis for the wall unit, ν/u τ (kinematic viscosity/friction velocity: [τ w/ρ ]1/2), which establishes the intrinsic length scale in the flow. The selected paper [1] provides a comprehensive review of—and builds upon—prior techniques to obtain τ w values over an area of interest for flow past complex geometries. The quantities that can be measured by optical imaging are shown to be related to the skin friction by the optical flow equation, which in turn is solved numerically as an inverse problem via the variational approach. The paper provides a well defined set of guidelines for other investigators. Detailed examples of skin-friction measurements using luminescent oil films as well as temperature- and pressure-sensitive paints are presented. Quantitative uncertainty estimates are included in the

  2. Mentoring psychiatric trainees' first paper for publication.

    Science.gov (United States)

    Lambert, M T; Garver, D L

    1998-03-01

    The authors describe their experience supervising and collaborating on projects that led to the first publications of several medical students and psychiatric residents. Rather than mandating a research project of all the residents, the faculty focus effort on the trainees with a sincere interest in writing a scholarly paper for publication. The authors break down the procedure of developing a published project into manageable steps that reflect and teach the scientific process. The mentoring required for these trainee-faculty publications is involved and time consuming, but the process is extremely rewarding. Four successful projects illustrate different levels of publication possibilities for trainees and demonstrate the positive effects the experiences had on their academic aspirations.

  3. Transcriptional activation in chondrocytes submitted to hydrostatic pressure.

    Science.gov (United States)

    Sironen, R; Elo, M; Kaarniranta, K; Helminen, H J; Lammi, M J

    2000-01-01

    At present, only a little is known about the transcriptional regulation in chondrocytes submitted to various physicomechanical factors known to exist in articular cartilage. Recently, we have investigated the effects of hydrostatic pressure on transcriptional control in chondrocytes using human chondrosarcoma and immortalized chondrocyte cell lines for the experiments. Hydrostatic pressure was applied on the cells in a special computer-controlled, water-filled pressure chamber, where cyclic and static pressures up to 32 MPa can be created. Differential display RT-PCR and probing of cDNA arrays are the methods we have used to study differential gene expression due to hydrostatic pressure. By differential display RT-PCR experiments, we have observed several differentially expressed cDNA bands under continuous 30 MPa hydrostatic pressure, while 30 MPa cyclic pressure at 1 Hz produced much fewer changes. In the first phase of our studies, we have focused on the effects of 30 MPa hydrostatic pressure because it causes a unique hsp70-mediated stress response in immortalized chondrocytes. Differential display RT-PCR screening provided us with several clones that derive from low-abundance mRNAs, such as death-associated protein 3 (DAP3), a nucleotide-binding protein which increases due to interferon-gamma induced cell death; PTZ-17 (or p311), a seizure-related protein; H-NUC, a nuclear DNA binding protein; and one new gene of unknown function. In Northern blots, an induction was confirmed for the new gene, DAP3 and PTZ-17 were down-regulated in some but not in all parallel experiments; however, basal level of H-NUC mRNA was too low to be detected in Northern blots. We then chose to widen our screening to a number of known genes arrayed as cDNA blots. Under 30 MPa continuous hydrostatic pressure, four different time points were chosen (0, 3, 6 and 24 h) for the experiments. The screening of 588 cDNAs showed 15 up-regulated and 6 down-regulated genes. Consistently with our

  4. Nursing diagnoses and interventions in children submitted to cochlear implantation.

    Science.gov (United States)

    Pereira, Patrícia Juliana Santos; Souza, Natália Fernanda Higa de; Almeida, Raissa Janine de; Menezes, Daiane Cabrera; Bom, Gesiane Cristina; Trettene, Armando Dos Santos

    2017-06-12

    Identifying the main nursing diagnoses and interventions in children submitted to cochlear implant in the immediate postoperative period. A cross-sectional study conducted between February and April 2016, considering nursing history (anamnesis and physical examination) and nursing diagnoses (NANDA - International) with their respective interventions (Nursing Intervention Classification - NIC). Descriptive statistical analysis was used to construct the results. A total of 19 children participated in this study. The main nursing diagnoses listed were: impaired verbal communication, impaired skin integrity, risk for infection, risk for falls, and risk for bleeding (n=19; 100%). Regarding the nursing interventions, the following prevailed: Improvement in communication: auditory deficit, Skin surveillance, Protection against infection, Prevention of falls and Precautions against bleeding (n=19; 100%). Nursing diagnoses and interventions related to the cochlear implant postoperative period were related to communication, bleeding control, surgical wound care, infection prevention, comfort and well-being. Identificar os principais diagnósticos e intervenções de enfermagem em crianças submetidas a implante coclear em pós-operatório imediato. Estudo transversal realizado entre fevereiro e abril de 2016. Foram considerados o histórico de enfermagem (anamnese e exame físico) e os diagnósticos de enfermagem (NANDA - Internacional) com suas respectivas intervenções (Nursing Intervention Classification - NIC). Para construção dos resultados utilizou-se da análise estatística descritiva. Participaram do presente estudo 19 crianças. Os principais diagnósticos de enfermagem elencados foram: Comunicação verbal prejudicada, Integridade da pele prejudicada, Risco de infecção, Risco de queda e Risco de sangramento (n=19; 100%). Quanto às intervenções de enfermagem, prevaleceram: Melhora na comunicação: deficit auditivo, Supervisão da pele, Proteção contra

  5. Glucose metabolism in rats submitted to skeletal muscle denervation

    Directory of Open Access Journals (Sweden)

    Wilton Marlindo Santana Nunes

    2005-07-01

    Full Text Available This study analyzed the local and systemic effects of immobilization by denervation of the skeletal muscle on glucose metabolism. The rats were submitted to section of the right paw sciatic nerve. A reduction was observed in glucose uptake by the isolated soleus muscle of the denervated paw after 3 and 7 days, but not after 28 days in relation to the control animals. There was no difference after 3 and 7 days in glucose uptake by the soleus muscle of the opposite intact paw in relation to the control. There was increased glucose uptake in the same paw 28 days after denervation. The rate of glucose removal in response to exogenous insulin after 28 days of denervation was significantly higher than in control animals and those observed after 3 and 7 days of denervation. These results suggest that immobilization by denervation interfered not only in glucose metabolism in the skeletal muscle involved but also in other tissues.O estudo analisou os efeitos locais e sistêmicos da imobilização por desnervação do músculo esquelético sobre o metabolismo glicidico. Ratos foram submetidos à secção do nervo ciático da pata direita. Observou-se redução da captação de glicose pelo músculo sóleo isolado da pata desnervada após 3 e 7 mas não após 28 dias em relação a animais controle. Não houve diferença após 3 e 7 dias na captação de glicose pelo músculo sóleo da pata contralateral intacta em relação ao controle. Houve aumento da captação de glicose nesta mesma pata 28 dias após a desnervação. A taxa de remoção da glicose em resposta à insulina exógena após 28 dias de desnervação foi significantemente superior à do controle e àquelas observadas após 3 e 7 dias da desnervação. Esses resultados sugerem que a imobilização por desnervação interfere não só no metabolismo da glicose no músculo esquelético envolvido como também em outros tecidos.

  6. Survival of Macrobrachium amazonicum embryos submitted to cooling.

    Science.gov (United States)

    Ferreira, Arthur Vinícius Lourenço; Martins, Moisés Fernandes; Martins de Sousa, Míriam Luzia Nogueira; Soares Filho, Aldeney Andrade; Sampaio, Célia Maria de Souza

    2017-06-01

    Cooling techniques have several applications for reproduction in aquaculture. However, few studies have sought to create protocols for cooling and cryopreservation of Macrobrachium amazonicum embryos. Thus, the objective of this work was to verify the survival of M. amazonicum embryos and the correlation between embryonic volume and mortality of M. amazonicum embryos after cooling. Embryo pools were collected from three females and divided into two treatment groups: dimethyl sulfoxide (DMSO) 3% and ethylene glycol (EG) 0.5%, both of them associated with 2 M sucrose. Positive and negative control groups consisted of seawater 10%. Aliquots of 10 µg of embryos were placed in Falcon® tubes containing a cryoprotectant solution and submitted directly to the test temperature of 2°C for 2 and 6 h of cooling. Further analysis of survival and embryonic volume were performed under a stereoscopic microscope. Data were subjected to analysis of variance (ANOVA), and means were compared using the Tukey test at 5%. The highest embryonic survival rate was observed after the shortest storage time for both the DMSO 3% and the 0.5% EG groups, with survival rates of 84.8 ± 3.9 and 79.7 ± 2.8%, respectively. There was a reduction in survival after 24 h, with the DMSO 3% group presenting a survival rate of 71.7 ± 6.6%, and the EG 0.5% group, 66 ± 6.9%. Survival showed a statistically significant difference when compared with the positive controls after 2 h and 24 h of cooling, with 99 ± 0.5% and 95.8 ± 1.5% survival rates, respectively. There was no significant statistical difference in the embryonic volume, but it was possible to observe a change in the appearance of the embryos, from a translucent coloration to an opaque white or brownish coloration, after 24 h in incubators. Thus, it can be concluded that survival is inversely proportional to storage time and that, although there was no change in the embryonic volume after cooling, a change in the appearance of embryos could

  7. The Requirements Generation System: A tool for managing mission requirements

    Science.gov (United States)

    Sheppard, Sylvia B.

    1994-01-01

    Historically, NASA's cost for developing mission requirements has been a significant part of a mission's budget. Large amounts of time have been allocated in mission schedules for the development and review of requirements by the many groups who are associated with a mission. Additionally, tracing requirements from a current document to a parent document has been time-consuming and costly. The Requirements Generation System (RGS) is a computer-supported cooperative-work tool that assists mission developers in the online creation, review, editing, tracing, and approval of mission requirements as well as in the production of requirements documents. This paper describes the RGS and discusses some lessons learned during its development.

  8. Electrical Textile Valves for Paper Microfluidics.

    Science.gov (United States)

    Ainla, Alar; Hamedi, Mahiar M; Güder, Firat; Whitesides, George M

    2017-10-01

    This paper describes electrically-activated fluidic valves that operate based on electrowetting through textiles. The valves are fabricated from electrically conductive, insulated, hydrophobic textiles, but the concept can be extended to other porous materials. When the valve is closed, the liquid cannot pass through the hydrophobic textile. Upon application of a potential (in the range of 100-1000 V) between the textile and the liquid, the valve opens and the liquid penetrates the textile. These valves actuate in less than 1 s, require low energy (≈27 µJ per actuation), and work with a variety of aqueous solutions, including those with low surface tension and those containing bioanalytes. They are bistable in function, and are, in a sense, the electrofluidic analog of thyristors. They can be integrated into paper microfluidic devices to make circuits that are capable of controlling liquid, including autonomous fluidic timers and fluidic logic. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. Statutory protection for the water requirements of natural ecosystems

    Directory of Open Access Journals (Sweden)

    Maritza Uys

    1992-09-01

    Full Text Available A project was recently registered with the National Parks Board to investigate the need for legal protection of the water requirements of natural ecosystems and the existing legislation which provides such protection. There is a distinct lack of legal protection, which is identified and discussed in this paper. It is submitted that the current South African water law is outdated and in need of reform so as to accommodate the demands of a wider spectrum of user sectors. Since the amendment of the existing water allocation system (in a country where water is a scarce resource could be politically a disconcerting step, it should be made only after due consideration of the various needs for water, the historical foundation of the existing system, and a study made of effective systems in countries with similar water problems. An in-depth study of the historical development of South African water law has already revealed interesting yet abrogated concepts, which can possibly serve as a means of protecting the natural water requirements.

  10. Architecture-driven requirements prioritization

    OpenAIRE

    Koziolek, Anne

    2012-01-01

    Quality requirements are main drivers for architectural decisions of software systems. However, in practice they are often dismissed during development, because of initially unknown dependencies and consequences that complicate implementation. To decide for meaningful, feasible quality requirements and trade them off with functional requirements, tighter integration of software architecture evaluation and requirements prioritization is necessary. In this position paper, we propose a tool-supp...

  11. The Early Repolarization Pattern: A Consensus Paper.

    Science.gov (United States)

    Macfarlane, Peter W; Antzelevitch, Charles; Haissaguerre, Michel; Huikuri, Heikki V; Potse, Mark; Rosso, Raphael; Sacher, Frederic; Tikkanen, Jani T; Wellens, Hein; Yan, Gan-Xin

    2015-07-28

    The term early repolarization has been in use for more than 50 years. This electrocardiographic pattern was considered benign until 2008, when it was linked to sudden cardiac arrest due to idiopathic ventricular fibrillation. Much confusion over the definition of early repolarization followed. Thus, the objective of this paper was to prepare an agreed definition to facilitate future research in this area. The different definitions of the early repolarization pattern were reviewed to delineate the electrocardiographic measures to be used when defining this pattern. An agreed definition has been established, which requires the peak of an end-QRS notch and/or the onset of an end-QRS slur as a measure, denoted Jp, to be determined when an interpretation of early repolarization is being considered. One condition for early repolarization to be present is Jp ≥0.1 mV, while ST-segment elevation is not a required criterion. Copyright © 2015 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  12. Design of a Manually Operated Paper-Recycling Machine

    Directory of Open Access Journals (Sweden)

    M. A. OLUTOYE

    2005-01-01

    Full Text Available A manually operated paper-recycling machine was designed and fabricated. This was done to enable waste paper conversion into useful product. The fabricated plant consists of six major component units that include the disc refiner, the hydropulper, the head box, the felt conveyor, the driers and the rollers. From the results of experimental analysis carried out on the study, it was discovered that for every 0.1kg of used paper fed into the refiner, about 7000ml of water is required to defibre it, and about 0.2 kg of starch adhesive is required. The calculated volume of the refiner, hydropulper and head box is 11795.62cm3, 62930.47cm3 and 60979.096cm3 respectively. The fabricated machine is capable of producing 7.6 kg of recycled paper from 10 kg of used paper.

  13. ETHICAL ASPECTS AND DILEMMAS OF PREPARING, WRITING AND PUBLISHING OF THE SCIENTIFIC PAPERS IN THE BIOMEDICAL JOURNALS

    OpenAIRE

    Masic, Izet

    2012-01-01

    Introduction: In this paper author discussed about preparing and submitting manuscripts - scientific, research, professional papers, reviews and case reports. Author described it from the Editor?s perspective, and specially talked about ethical aspects of authorship, conflict of interest, copyright, plagiarism and duplicate publication from the point of view of his experiences as Editor-in-Chief of several biomedical journals and Chief of Task Force of European Federation of Medical Informati...

  14. 59 – 64, 2014 ISSN:1998-0507 Submitted

    African Journals Online (AJOL)

    Osondu

    2013-10-28

    Oct 28, 2013 ... like credit/loan facility, supply of improved variety, subsidized farm inputs, availability of land, and pest and disease control. The results of this study ... land, credit, or information) required for effective production (Ogunlela and ... score lower than 2.50 indicated a non-production need. Results and Discussion.

  15. Abstracts of Manuscripts Submitted in 1992 for Publication

    Science.gov (United States)

    1993-04-01

    requires autoinducer (N-3-oxo-hex~moyl restrict the growth rate of bacteria, stimulate their homoserine lactone ) and LuxIl protein, which luminescence...These results also indicate the following of the gas thermal window, suggesting that gas reactivity relationships: unsaturated fatty acids

  16. How to write English scientific paper easily

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Hyeong Sun

    2010-07-15

    This book covers definition of paper, how to write paper, as well as proofreading of paper and process of publication. It explains necessity and kinds of paper, organizations and form of paper, evaluation of paper, titles, abstracts, introductions, method of study, results, considerations, conclusions, acknowledgement and epilogue, reference, writers, pictures and tables, tense and analysis of sentences, submission of paper and ethics of publication, plagiarism, confirmation of items before writing paper, matters to be attended to drafting, and criteria and assessment of the examination of paper.

  17. 40 CFR 63.1210 - What are the notification requirements?

    Science.gov (United States)

    2010-07-01

    ... evaluations. 1 You may also be required on a case-by-case basis to submit a feedstream analysis plan under... hazardous waste feedstream analysis for organic hazardous air pollutants if the reduced analysis continues... advertisement. You must publish a notice in a newspaper of general circulation in the county or equivalent...

  18. 75 FR 15639 - Revision of the Requirements for Constituent Materials

    Science.gov (United States)

    2010-03-30

    ... Evaluation and Research (CDER), as appropriate, to approve exceptions or alternatives to the regulation for..., extraneous protein and antibiotics that are contained in a biological product. FDA is proposing to amend the... appropriate, to approve an exception or alternative to the requirements under Sec. 610.15, when data submitted...

  19. 44 CFR 17.630 - Certification requirements and procedures.

    Science.gov (United States)

    2010-10-01

    ...-cost time extension of such a grant. However, the grantee shall make a one-time drug-free workplace... AGENCY, DEPARTMENT OF HOMELAND SECURITY GENERAL GOVERNMENTWIDE REQUIREMENTS FOR DRUG-FREE WORKPLACE... formula grants and entitlements that have no application process, grantees shall submit a one-time...

  20. 48 CFR 819.704 - Subcontracting plan requirements.

    Science.gov (United States)

    2010-10-01

    ... 48 Federal Acquisition Regulations System 5 2010-10-01 2010-10-01 false Subcontracting plan... SOCIOECONOMIC PROGRAMS SMALL BUSINESS PROGRAMS The Small Business Subcontracting Program 819.704 Subcontracting plan requirements. (a) The contracting officer shall ensure that any subcontracting plans submitted by...

  1. 47 CFR 90.527 - Regional plan requirements.

    Science.gov (United States)

    2010-10-01

    ...-775 and 793-805 MHz Bands § 90.527 Regional plan requirements. Each regional planning committee must... regional planning chairperson that all planning committee meetings, including subcommittee or executive... modified by submitting a written request, signed by the regional planning committee, to the Chief, Wireless...

  2. 46 CFR 57.03-1 - General requirements.

    Science.gov (United States)

    2010-10-01

    ... QW 480 and QB 480 of section IX of the ASME Code. (2) Each manufacturer or contractor must submit to... required by section IX of the ASME Code. (b) (Modifies QW 202.1 and QW 451). To obtain approval of the... ASME Code, plus toughness tests and a macro-etch specimen. (2) To obtain approval the fabricator must...

  3. 40 CFR 63.11410 - What are the compliance requirements?

    Science.gov (United States)

    2010-07-01

    ... 5 years from the date of the monitoring sample, measurement, report, or application. (e) Reports. (1... business day after becoming aware of the deviation. You must submit a written report within 2 business days... performance of the device for reducing PM to the levels required by this subpart; (3) Operation and...

  4. 40 CFR 158.500 - Toxicology data requirements table.

    Science.gov (United States)

    2010-07-01

    ... neurotoxicity study using separate groups of animals for testing. Although the subchronic guidelines include the... support a waiver for such testing. Registrants should submit any alternative proposed testing protocols... Requirements Use Pattern Food Nonfood Test substance to support MP EP Test Note No. Acute Testing 870.1100...

  5. 40 CFR 600.507-12 - Running change data requirements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Running change data requirements. 600... Passenger Automobiles)-Procedures for Determining Manufacturer's Average Fuel Economy § 600.507-12 Running... shall submit additional running change fuel economy and carbon-related exhaust emissions data as...

  6. 40 CFR 600.507-08 - Running change data requirements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Running change data requirements. 600... Passenger Automobiles)-Procedures for Determining Manufacturer's Average Fuel Economy § 600.507-08 Running... shall submit additional running change fuel economy data as specified in paragraph (b) of this section...

  7. 40 CFR 600.507-86 - Running change data requirements.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 29 2010-07-01 2010-07-01 false Running change data requirements. 600... Passenger Automobiles)-Procedures for Determining Manufacturer's Average Fuel Economy § 600.507-86 Running... shall submit additional running change fuel economy data as specified in paragraph (b) of this section...

  8. Contract Types: An Overview of the Legal Requirements and Issues

    Science.gov (United States)

    2010-08-24

    erformed by the subcontractors; or (3) [t] ransferred between divisions, subsidiaries, or affiliates of the contractor under a common control.” 48...for FY2011, H.R. 5136, § 408 (same); id. at § 832 (requiring contractors submitting proposals for energy -savings contracts to use firm-fixed-price

  9. Evaluation "in situ" of tag formation in dental enamel submitted to microabrasion technique. Effect of two etching times.

    Science.gov (United States)

    Hoeppner, Márcio G; Mauro, Silvio J; Alexandre, Rodrigo S; Sundefeld, Maria L M M; Sundfeld, Renato H

    2010-01-01

    The objective of this study was to analyze the formation of resin tags on enamel surfaces submitted or not to enamel microabrasion technique. Thirteen undergraduate dental students received removable acrylic palatal appliances on which four sections from intact premolars were fixed, measuring 4.0 mm x 4.0 mm. Two sections received the application of a microabrasive system and the remaining sections did not receive any surface treatment. The patients were instructed to wear the acrylic palatal appliances for 4 months during the day. After this time, the sections were etched with 37% phosphoric acid for 15 seconds (sections 1 and 2) and 60 seconds (sections 3 and 4), followed by adhesive system and composite resin applications. All the sections were prepared for light microscopy analysis to observe the degree of resin penetration (x400). The results were submitted to a three-way analysis of variance with a significance level of 5%. The difference between groups was verified by the Tukey test, at a significance level of 5%. The results showed that microabraded enamel required a longer period of acid etching for longer resin tags.

  10. International data base of exposure measurements in the pulp, paper and paper product industries.

    Science.gov (United States)

    Kauppinen, T; Teschke, K; Savela, A; Kogevinas, M; Boffetta, P

    1997-01-01

    An international data base of exposure measurements in the pulp, paper and paper product industries was constructed to be used in exposure assessment for epidemiology studies and hazard control. Industrial hygiene and biological monitoring data were collected from countries participating in the multicentric study of the International Agency for Research on Cancer. Each measurement was characterized by country, mill type and number, department, job, agent measured, sampling method, measurement result in the standard unit, duration and date of sampling, assessment of representativeness, measurer, purpose of measurements, and remarks (e.g. on measurement sites and biases). Over 31,000 measurement results on 246 different chemical agents from 13 countries were available from pulp (45% of measurements), paper/paperboard/recycling (12%) and paper product (11%) mills or from their non-production departments (23%). Most measurements (82%) were carried out after 1980. The most frequently measured group of agents was inorganic gases (35%), followed by organic compounds (25%), solvents (18%), mineral dusts (12%), metals (6%) and bioaerosols (3%). Over 90% of the measurements were without an obvious bias, but their true representativeness is difficult to assess. Concentrations of various agents, including sulfur dioxide, chlorine dioxide, carbon monoxide, nitrogen dioxide, ozone, ammonia, formaldehyde and some solvents, often exceeded current occupational exposure limits. This data base summarizes a great deal of previously unpublished exposure data, provides a unique opportunity to study exposure patterns at the international level and identifies exposure situations that require further attention and investigation.

  11. 14 CFR 193.5 - How may I submit safety or security information and have it protected from disclosure?

    Science.gov (United States)

    2010-01-01

    ... SUBMITTED INFORMATION § 193.5 How may I submit safety or security information and have it protected from... 14 Aeronautics and Space 3 2010-01-01 2010-01-01 false How may I submit safety or security information and have it protected from disclosure? 193.5 Section 193.5 Aeronautics and Space FEDERAL AVIATION...

  12. 78 FR 42085 - Draft Guidance for Industry on Pediatric Study Plans: Content of and Process for Submitting...

    Science.gov (United States)

    2013-07-15

    ...: Content of and Process for Submitting Initial Pediatric Study Plans and Amended Pediatric Study Plans... Plans: Content of and Process for Submitting Initial Pediatric Study Plans and Amended Pediatric Study... draft guidance for industry entitled ``Pediatric Study Plans: Content of and Process for Submitting...

  13. 77 FR 60714 - Information Collection Activities: Legacy Data Verification Process (LDVP); Submitted for Office...

    Science.gov (United States)

    2012-10-04

    ... the information. The subject of this information collection request is the ``Legacy Data Verification... Bureau of Safety and Environmental Enforcement Information Collection Activities: Legacy Data Verification Process (LDVP); Submitted for Office of Management and Budget (OMB) Review; Comment Request ACTION...

  14. 78 FR 56225 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Soil...

    Science.gov (United States)

    2013-09-12

    ... AGENCY Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Soil...) for review and approval in accordance with the Paperwork Reduction Act: ``Soil Fumigant Risk... measures necessary for reregistration eligibility for certain soil fumigant chemicals are adequately...

  15. Dosimetry of patients submitted to cerebral PET/CT for the diagnosis of mild cognitive impairment

    Energy Technology Data Exchange (ETDEWEB)

    Santana, Priscila do Carmo; Oliveira, Paulo Marcio Campos de; Bernardes, Felipe Dias; Mamede, Marcelo, E-mail: pridili@gmail.com [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil); Mourao, Arnaldo Prata [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET), Belo Horizonte, MG (Brazil); Silva, Teogenes Augusto da [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2014-11-15

    Objective: the present study was aimed at evaluating the effective radiation dose in patients submitted to PET/CT for the diagnosis of mild cognitive impairment. Materials and methods: TLD-100 detectors inserted into an Alderson Rando® anthropomorphic phantom were utilized to measure the absorbed dose coming from the CT imaging modality. The anthropomorphic phantoms (male and female adult versions) were submitted to the same technical protocols for patients’ images acquisition. The absorbed dose resulting from the radiopharmaceutical injection was estimated by means of the model proposed by the ICRP publication 106. Results: the effective dose in patients submitted to this diagnostic technique was approximately (5.34 ± 1.99) mSv. Conclusion: optimized protocols for calculation of radioactive activity injected into patients submitted to this diagnostic technique might contribute to reduce the effective radiation dose resulting from PET/CT in the diagnosis of mild cognitive impairment. (author)

  16. 78 FR 72079 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request...

    Science.gov (United States)

    2013-12-02

    ...; Restructuring of the Stationary Source Audit Program (Renewal) AGENCY: Environmental Protection Agency (EPA). ACTION: Notice. SUMMARY: The Environmental Protection Agency has submitted an information collection... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION...

  17. Privacy Act System of Records: Invention Reports Submitted to the EPA, EPA-38

    Science.gov (United States)

    Learn about the Invention Reports Submitted to the EPA System, including who is covered in the system, the purpose of data collection, routine uses for the system's records, and other security procedures.

  18. 78 FR 19260 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request...

    Science.gov (United States)

    2013-03-29

    ... additional information about EPA's public docket, visit http://www.epa.gov/dockets . Abstract: EPA will... current members in the party classes are to submit updates and corrections to their current registration...

  19. Summary of Country Reports Submitted to the Energy Efficiency Working Party: October 2011

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2011-07-01

    The purpose of this summary report is to highlight energy efficiency policy action and planning in IEA member countries submited to the Energy Efficiency Working Party (EEWP) from March to September 2011.

  20. Request for Available Information on Chlorinated Paraffins Submitted as Pre-Manufacture Notices (PMNs)

    Science.gov (United States)

    EPA is requesting new available data on certain chlorinated paraffins in different industries and for different uses, to inform the risk assessments for chlorinated paraffins submitted as Toxic Substances Control Act (TSCA) Premanufacture Notices (PMNs).

  1. 44 CFR 65.4 - Right to submit new technical data.

    Science.gov (United States)

    2010-10-01

    ... a right to request changes to any of the information shown on an effective map that does not impact... community (CEO) or an official designated by the CEO. Should the CEO refuse to submit such a request on...

  2. 78 FR 43880 - Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Notice...

    Science.gov (United States)

    2013-07-22

    ... From the Federal Register Online via the Government Publishing Office ENVIRONMENTAL PROTECTION AGENCY Information Collection Request Submitted to OMB for Review and Approval; Comment Request; Notice of Supplemental Distribution of a Registered Pesticide Product AGENCY: Environmental Protection...

  3. How do we handle self-plagiarism in submitted manuscripts?

    Science.gov (United States)

    Šupak-Smolčić, Vesna; Bilić-Zulle, Lidija

    2013-01-01

    Self-plagiarism is a controversial issue in scientific writing and presentation of research data. Unlike plagiarism, self-plagiarism is difficult to interpret as intellectual theft under the justification that one cannot steal from oneself. However, academics are concerned, as self-plagiarized papers mislead readers, do not contribute to science, and bring undeserved credit to authors. As such, it should be considered a form of scientific misconduct. In this paper, we explain different forms of self-plagiarism in scientific writing and then present good editorial policy toward questionable material. The importance of dealing with self-plagiarism is emphasized by the recently published proposal of Text Recycling Guidelines by the Committee on Publication Ethics (COPE). PMID:23894861

  4. How do we handle self-plagiarism in submitted manuscripts?

    Science.gov (United States)

    Supak-Smocić, Vesna; Bilić-Zulle, Lidija

    2013-01-01

    Self-plagiarism is a controversial issue in scientific writing and presentation of research data. Unlike plagiarism, self-plagiarism is difficult to interpret as intellectual theft under the justification that one cannot steal from oneself. However, academics are concerned, as self-plagiarized papers mislead readers, do not contribute to science, and bring undeserved credit to authors. As such, it should be considered a form of scientific misconduct. In this paper, we explain different forms of self-plagiarism in scientific writing and then present good editorial policy toward questionable material. The importance of dealing with self-plagiarism is emphasized by the recently published proposal of Text Recycling Guidelines by the Committee on Publication Ethics (COPE).

  5. 30 CFR 756.21 - Required amendments to the Crow Tribe's abandoned mine land reclamation plan.

    Science.gov (United States)

    2010-07-01

    ... 30 Mineral Resources 3 2010-07-01 2010-07-01 false Required amendments to the Crow Tribe's... RECLAMATION PROGRAMS § 756.21 Required amendments to the Crow Tribe's abandoned mine land reclamation plan. Pursuant to 30 CFR 884.15, the Crow Tribe is required to submit to OSM by the date specified either a...

  6. Rebuttal to a Paper on Wormholes

    OpenAIRE

    Susskind, Leonard

    2005-01-01

    In a recent paper on wormholes (gr-qc/0503097), the author of that paper demonstrated that he didn't know what he was talking about. In this paper I correct the author's naive erroneous misconceptions.

  7. Submitting Canine Blood for Prothrombin Time and Partial Thromboplastin Time Determinations

    OpenAIRE

    Smalko, Donna; Johnstone, Ian B.; Crane, Stewart

    1985-01-01

    Practitioners commonly submit samples from dogs for partial thromboplastin time and prothrombin time determinations. Controversy exists as to the necessity for rapid separation of plasma and cells, and submission of the plasma on ice (or frozen). The purpose of this study was to address three questions. First, is it better to submit plasma or is whole blood satisfactory? Second, is it necessary to refrigerate the sample or is maintenance at room temperature (20° C) adequate? Third, does the s...

  8. 78 FR 77724 - PPL Bell Bend, LLC; Bell Bend Nuclear Power Plant; Exemption From the Requirement To Submit an...

    Science.gov (United States)

    2013-12-24

    ... License (COL) application for a single unit of AREVA NP's U.S. EPR to be constructed and operated as Bell... is currently performing the detailed reviews of the CCNPP3 RCOL application, and AREVA NP's...

  9. 7 CFR 319.5 - Requirements for submitting requests to change the regulations in 7 CFR part 319.

    Science.gov (United States)

    2010-01-01

    ... post-harvest processing treatments in pest control; (iii) Culling percentage and efficacy of culling in...-harvest transit and processing: (i) Complete description of the post-harvest processing methods used; and... commodity; (iii) Stage of maturity at which the crop is harvested and the method of harvest; (iv) Indication...

  10. 41 CFR 61-250.11 - On what form must the data required by this part be submitted?

    Science.gov (United States)

    2010-07-01

    ... the space provided. For each form, only one box should be checked within this block. COMPANY... are not limited to the following services: utility, construction, transportation, research, insurance... and address of the hiring locations covered by the report. Company consolidated reports such as those...

  11. 15 CFR 2007.1 - Information required of interested parties in submitting requests for modifications in the last...

    Science.gov (United States)

    2010-01-01

    ... quantity, value and price, as well as considerations which affect the competitiveness of these exports..., value and price; (6) Quantity and value of exports, as well as principal export markets; (7... granted; (6) Sales figures in terms of quantity, value and prices; (7) Information on total exports...

  12. 78 FR 75388 - Duke Energy Progress; Shearon Harris Units 2 and 3; Exemption From the Requirement To Submit an...

    Science.gov (United States)

    2013-12-11

    ... publicly-available information related to this action by the following methods: Federal Rulemaking Web site..., select ``ADAMS Public Documents'' and then select ``Begin Web- based ADAMS Search.'' For problems with... above, no new accident precursors are created by the exemption; thus neither the probability, nor the...

  13. 20 CFR 10.438 - Can OWCP require the individual who received the overpayment to submit additional financial...

    Science.gov (United States)

    2010-04-01

    ... OFFICE OF WORKERS' COMPENSATION PROGRAMS, DEPARTMENT OF LABOR FEDERAL EMPLOYEES' COMPENSATION ACT CLAIMS FOR COMPENSATION UNDER THE FEDERAL EMPLOYEES' COMPENSATION ACT, AS AMENDED Compensation and Related... equity and good conscience. This information will also be used to determine the repayment schedule, if...

  14. 13 CFR 125.15 - What requirements must an SDVO SBC meet to submit an offer on a contract?

    Science.gov (United States)

    2010-01-01

    ... venturer as the project manager responsible for performance of the SDVO contract; (iii) Stating that not... other concern with respect to performance of the SDVO contract. The combined annual receipts or...); (iv) Specifying the responsibilities of the parties with regard to contract performance, source of...

  15. China under the Four Modernizations: Part 2. Selected Papers Submitted to the Joint Economic Committee. Congress of the United States, Ninety-Seventh Congress, Second Session.

    Science.gov (United States)

    Joint Economic Committee, Washington, DC.

    The politics and performance of the post-Mao Chinese government (1976 to the present) in the areas of foreign economic relations and Sino-American normalization are examined. Realizing that the four modernizations program for bringing up to date agriculture, industry, science and technology, and defense, initiated by Mao's successors in 1977, was…

  16. Proceedings of the Brain Mapping Machine Design Workshop Held in College Station, TX on 10-16 August, 1985. Volume 3. Background Papers Submitted by Participants.

    Science.gov (United States)

    1985-08-01

    instance, super micros based on 32-bit microprocessors can perform many of the house- keeping chores while number crunching is done on relatively...Graphics Assoc., Chicago, IL, pp 130 - 135. June 1983. Rhodes, M.., et al, "Anatomic model and prosthesis manufacturing using CT images", National Computer...of peak capacity generating an approach to material handling automation reached by the semiconductor industry. The knee of the equipment in wafer

  17. Regression models for the prediction of water quality in the stormwater of urban arid catchmentsA paper submitted to the Journal of Environmental Engineering and Science

    National Research Council Canada - National Science Library

    Al-Noman, N; Nouh, M

    2009-01-01

    Data from five residential urban arid catchments were used to develop regression equations for predicting mean concentrations of selected heavy metals in the stormwater runoff from duststorm and storm...

  18. China under the Four Modernizations: Part 1. Selected Papers Submitted to the Joint Economic Committee. Congress of the United States, Ninety-Seventh Congress, Second Session.

    Science.gov (United States)

    Joint Economic Committee, Washington, DC.

    The policies and performance of the post-Mao Chinese government (1976 to the present) in the four modernization areas of industry, agriculture, science and technology, and the military are examined. Realizing that the program to modernize the economy of the People's Republic of China, which was initiated by Mao's successors in 1977, was much too…

  19. Experimental assessment of the surface temperature of copper electrodes submitted to an electric arc in air at atmospheric pressure

    Energy Technology Data Exchange (ETDEWEB)

    Landfried, R; Leblanc, T; Andlauer, R; Teste, Ph, E-mail: teste@lgep.supelec.fr [Laboratoire de Genie Electrique de Paris : SUPELEC - CNRS - Universites Paris VI et Paris XI - Plateau de Moulon - 91192 Gif sur Yvette Cedex (France)

    2011-01-01

    This paper concerns the assessment of the surface temperature of copper electrodes submitted to an electric arc in a non stationary regime in air. An infrared camera is used to measure the decrease of the temperature surface just after a controlled and very fast arc extinction. In the first part, the experimental method is described. In the second part, results are presented for 60-70 A with an electric arc duration in the range 3-4 ms. The temperature decrease after the arc extinction allows to reach an assessment of the surface temperature just at the arc switching off. In the present experimental conditions the mean temperatures reached for copper cathodes and anodes are in the range 750-850 deg. C.

  20. Birch soil-site requirements

    Science.gov (United States)

    Boyd W. Post; Willard H. Carmean; Robert O. Curtis

    1969-01-01

    Yellow birch is among our more valued hardwood species. Yet only meager information about site requirements is available for this tree and for paper birch. Site studies for yellow birch and paper birch and for other northern hardwood species have been completed for the Green Mountains of Vermont by Curtis and Post (1962a, 1962b). A similar study for northern hardwoods...

  1. 21 CFR 872.6140 - Articulation paper.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Articulation paper. 872.6140 Section 872.6140 Food... DEVICES DENTAL DEVICES Miscellaneous Devices § 872.6140 Articulation paper. (a) Identification. Articulation paper is a device composed of paper coated with an ink dye intended to be placed between the...

  2. 27 CFR 41.34 - Cigarette papers.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Cigarette papers. 41.34... OF THE TREASURY (CONTINUED) TOBACCO IMPORTATION OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Taxes Tax Rates § 41.34 Cigarette papers. Cigarette papers are taxed at the following...

  3. 27 CFR 40.351 - Cigarette papers.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 2 2010-04-01 2010-04-01 false Cigarette papers. 40.351... OF THE TREASURY (CONTINUED) TOBACCO MANUFACTURE OF TOBACCO PRODUCTS, CIGARETTE PAPERS AND TUBES, AND PROCESSED TOBACCO Manufacture of Cigarette Papers and Tubes Taxes § 40.351 Cigarette papers. Cigarette...

  4. Wind Speed Measurement by Paper Anemometer

    Science.gov (United States)

    Zhong, Juhua; Cheng, Zhongqi; Guan, Wenchuan

    2011-01-01

    A simple wind speed measurement device, a paper anemometer, is fabricated based on the theory of standing waves. In providing the working profile of the paper anemometer, an experimental device is established, which consists of an anemometer sensor, a sound sensor, a microphone, paper strips, a paper cup, and sonic acquisition software. It shows…

  5. Textile paper as a circular material

    OpenAIRE

    Ashok, Archana

    2017-01-01

    Increasing resource efficiency by utilising secondary raw material is one of the key characteristics of a circular economy. Textile dust fibre, a waste generated from textile mechanical recycling has the prospect to be utilised as secondary raw material for producing novel material: textile paper suitable for packaging and other applications. A comparative Life Cycle Assessment (LCA) of carrier bags made from one ton of virgin paper, recycled paper and novel textile paper (~22584paper bags wi...

  6. Selected papers for global `95 concerning plutonium

    Energy Technology Data Exchange (ETDEWEB)

    Sutcliffe, W.G. [ed.

    1996-06-14

    This report contains selected papers from the Global `95 Conference ``Evaluation of Emerging Nuclear Fuel Cycle Systems,`` held in Versailles, Sept. 11-14, 1995. The 11 papers in Part I are from ``Benefits and Risks of Reprocessing`` sessions. The 7 papers in Part II are some of the more interesting poster papers that relate to the use of Pu for power generation. Finally, the 3 papers are on the topic of management and disposition of Pu from retired nuclear weapons.

  7. Graphene-cellulose paper flexible supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Weng, Zhe; Su, Yang; Li, Feng; Du, Jinhong; Cheng, Hui-Ming [Shenyang National Laboratory for Materials Science, Institute of Metal Research, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang 110016 (China); Wang, Da-Wei [ARC Centre of Excellence for Functional Nanomaterials, Australian Institute for Bioengineering and Nanotechnology, The University of Queensland, St Lucia, Brisbane, Qld 4072 (Australia)

    2011-10-15

    A simple and scalable method to fabricate graphene-cellulose paper (GCP) membranes is reported; these membranes exhibit great advantages as freestanding and binder-free electrodes for flexible supercapacitors. The GCP electrode consists of a unique three-dimensional interwoven structure of graphene nanosheets and cellulose fibers and has excellent mechanical flexibility, good specific capacitance and power performance, and excellent cyclic stability. The electrical conductivity of the GCP membrane shows high stability with a decrease of only 6% after being bent 1000 times. This flexible GCP electrode has a high capacitance per geometric area of 81 mF cm{sup -2}, which is equivalent to a gravimetric capacitance of 120 F g{sup -1} of graphene, and retains >99% capacitance over 5000 cycles. Several types of flexible GCP-based polymer supercapacitors with various architectures are assembled to meet the power-energy requirements of typical flexible or printable electronics. Under highly flexible conditions, the supercapacitors show a high capacitance per geometric area of 46 mF cm{sup -2} for the complete devices. All the results demonstrate that polymer supercapacitors made using GCP membranes are versatile and may be used for flexible and portable micropower devices. (Copyright copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  8. Recyclable Waste Paper Sorting Using Template Matching

    Science.gov (United States)

    Osiur Rahman, Mohammad; Hussain, Aini; Scavino, Edgar; Hannan, M. A.; Basri, Hassan

    This paper explores the application of image processing techniques in recyclable waste paper sorting. In recycling, waste papers are segregated into various grades as they are subjected to different recycling processes. Highly sorted paper streams will facilitate high quality end products, and save processing chemicals and energy. Since 1932 to 2009, different mechanical and optical paper sorting methods have been developed to fill the demand of paper sorting. Still, in many countries including Malaysia, waste papers are sorted into different grades using manual sorting system. Due to inadequate throughput and some major drawbacks of mechanical paper sorting systems, the popularity of optical paper sorting systems is increased. Automated paper sorting systems offer significant advantages over human inspection in terms of fatigue, throughput, speed, and accuracy. This research attempts to develop a smart vision sensing system that able to separate the different grades of paper using Template Matching. For constructing template database, the RGB components of the pixel values are used to construct RGBString for template images. Finally, paper object grade is identified based on the maximum occurrence of a specific template image in the search image. The outcomes from the experiment in classification for White Paper, Old Newsprint Paper and Old Corrugated Cardboard are 96%, 92% and 96%, respectively. The remarkable achievement obtained with the method is the accurate identification and dynamic sorting of all grades of papers using simple image processing techniques.

  9. CALL FOR PAPERS: Special cluster issue on `Experimental studies of zonal flow and turbulence'

    Science.gov (United States)

    Itoh, S.-I.

    2005-07-01

    Plasma Physics and Controlled Fusion (PPCF) invites submissions on the topic of `Experimental studies of zonal flow and turbulence', for consideration for a special topical cluster of articles to be published early in 2006. The topical cluster will be published in an issue of PPCF, combined with regular articles. The Guest Editor for the special cluster will be S-I Itoh, Kyushu University, Japan. There has been remarkable progress in the area of structure formation by turbulence. One of the highlights has been the physics of zonal flow and drift wave turbulence in toroidal plasmas. Extensive theoretical as well as computational studies have revealed the various mechanisms in turbulence and zonal flows. At the same time, experimental research on the zonal flow, geodesic acoustic modes and generation of global electric field by turbulence has evolved rapidly. Fast growth in reports of experimental results has stimulated further efforts to develop increased knowledge and systematic understanding. Each paper considered for the special cluster should describe the present research status and new scientific knowledge/results from the authors on experimental studies of zonal flow, geodesic acoustic modes and generation of electric field by turbulence (including studies of Reynolds-Maxwell stresses, etc). Manuscripts submitted to this special cluster in Plasma Physics and Controlled Fusion will be refereed according to the normal criteria and procedures of the journal. The Guest Editor guides the progress of the cluster from the initial open call, through the standard refereeing process, to publication. To be considered for inclusion in the special cluster, articles must be submitted by 2 September 2005 and must clearly state `for inclusion in the Turbulent Plasma Cluster'. Articles submitted after this deadline may not be included in the cluster issue but may be published in a later issue of the journal. Please submit your manuscript electronically via our web site at www

  10. Pearls for publishing papers: Tips and tricks

    Directory of Open Access Journals (Sweden)

    Karalikkattil T Ashique

    2016-01-01

    Full Text Available With the stringent regulations from various academic bodies making it desirable for a post graduate resident to have submitted an original article prior to appearance for their exams or those working in teaching institutions to have published articles to claim credit for applying for promotions and private practitioners to increase their visibility on the academic front, everyone is on a publishing spree. In this article, we attempt to elucidate the processes involved in publication; approaching it in a systematic and practical manner, incorporating some tips and tricks. This collection of pearls is aimed to serve as a beginner′s guide to scientific writing and publications. The pearls cover assorted topics like- benefits of publications, collecting resources, various tools available and technical processes related to how a manuscript is processed.

  11. Use of nanoparticle binders for paper coatings: A review

    Directory of Open Access Journals (Sweden)

    Bilge Nazli Altay

    2017-06-01

    Full Text Available Starch is a biopolymer that is used as a co-binder alongside synthetic petroleum based latex binders for paper coating applications, though it causes production downtimes due to the problems during cooking process, such as gelling; lack of full expansion of starch granules; increase in viscosity during cooling; bacteria growth in cooked starch and difficulties in viscosity control during storage. On the other hand, synthetic binders negatively affect paper recyclability and biodegradability. To overcome these problems, a new biopolymer binder has been introduced to the paper manufacturing, being used initially as a partial replacement for petroleum based synthetic latex polymers. This study reviews the recent developments of nanoparticle biopolymer binders, referred to as biolatex binders. These binders are shipped dry and can be dispersed in water without cooking requirement while improving paper quality and reducing costs of paper manufacturing. They also provide quality benefits, coater runnability improvements and new higher solids coating formulations for future product advancements.

  12. Effect of paper porosity on OCT images: Monte Carlo study

    Science.gov (United States)

    Kirillin, Mikhail Yu.; Priezzhev, Alexander V.; Myllylä, Risto

    2008-06-01

    Non-invasive measurement of paper porosity is an important problem for papermaking industry. Presently used techniques are invasive and require long time for processing the sample. In recent years optical coherence tomography (OCT) has been proved to be an effective tool for non-invasive study of optically non-uniform scattering media including paper. The aim of present work is to study the potential ability of OCT for sensing the porosity of a paper sample by means of numerical simulations. The paper sample is characterized by variation of porosity along the sample while numerical simulations allow one to consider the samples with constant porosity which is useful for evaluation of the technique abilities. The calculations were performed implementing Monte Carlo-based technique developed earlier for simulation of OCT signals from multilayer paper models. A 9-layer model of paper consisting of five fiber layers and four air layers with non-planar boundaries was considered. The porosity of the samples was varied from 30 to 80% by varying the thicknesses of the layers. The simulations were performed for model paper samples without and with optical clearing agents (benzyl alcohol, 1-pentanol, isopropanol) applied. It was shown that the simulated OCT images of model paper with various porosities significantly differ revealing the potentiality of the OCT technique for sensing the porosity. When obtaining the images of paper samples with optical clearing agents applied, the inner structure of the samples is also revealed providing additional information about the samples under study.

  13. Evaluation of phenotypic parameters of the mononuclear peripheral blood cells through flow cytometry from dogs submitted to irradiation of head and neck

    Energy Technology Data Exchange (ETDEWEB)

    Toledo, Janine Muniz; Siqueira, Savio Lana; Campos, Tarcisio P. Ribeiro; Valenca, Patricia de Lima Falcao [Universidade Federal de Minas Gerais (UFMG), Belo Horizonte, MG (Brazil). Programa de Pos-Graduacao em Ciencias e Tecnicas Nucleares]. E-mails: janine.toledo@gmail.com; savio.siqueira@ig.com.br; campos@nuclear.ufmg.br; patricia.falcao@yahoo.com.br

    2007-07-01

    The present paper addresses the investigation of the phenotypic parameters applying stimulation markers and cell immunosuppression markers in an animal model, through a flux cytometer, with the goal of looking for a future monitoring of the immunologic response of patients submitted to radiotherapy. Five dogs were submitted to low dose radiation, 2, 4 and 6 Gy at a protocol of head and neck. Samples of peripheral blood (PBMC) were collected before and after irradiation, and 2, 18h and 30d. Such samples were separated and were submitted to surface markers with monoclonal antibody anti-CD5, anti-CD4, anti-IgM, anti- CD14, anti-MHCII, anti-CTLA-4 and anti-IL-2R. The PBMCs were evaluated by flow cytometry. The following alterations were observed: reduction of the T-cell in circulation (CD5) and of the subpopulation CD4, reduction of the stimulation receptor and cellular interaction (MHC2) and from IL-2R, increasing of the expression CTLA-4. It was proved that the peripheral circulated cells during an in locus irradiation are morphological modified and therefore has its function redefined. Such results show the relevance of knowing the personal immune response of each patient through the investigation of the phenotype patter of their peripheral cell lineage. The quality of life of the patient can be improved and irradiation protocols may be altering in according to the personal immune response picture. (author)

  14. Heteronormativity and prostate cancer: A discursive paper.

    Science.gov (United States)

    Kelly, Daniel; Sakellariou, Dikaios; Fry, Sarah; Vougioukalou, Sofia

    2017-04-05

    To discuss the risks that heteronormative assumptions play in prostate cancer care and how these may be addressed. There is international evidence to support the case that LGBT patients with cancer are less likely to report poor health or self-disclose sexual orientation. Gender-specific cancers, such as prostate cancer, require particular interventions in terms of supportive care. These may include advice about side-effect management (such as incontinence or erectile dysfunction), treatment choices and social and emotional issues. In this paper, we discuss and analyse the heteronormative assumptions and culture that exist around this cancer. We argue that this situation may act as a barrier to effective supportive care for all Lesbian women, Gay, Transgender and Bisexual patients, in this case men who have sex with men. [Correction added on 21 September 2017, after first online publication: The first sentence of the Background section has been revised for clarity in this current version.] DESIGN: Theoretical exploration of heteronormativity considered against the clinical context of prostate cancer. Identification and inclusion of relevant international evidence combined with clinical discussion. This paper posits a number of questions around heteronormativity in relation to prostate cancer information provision, supportive care and male sexuality. While assumptions regarding sexual orientation should be avoided in clinical encounters, this may be difficult when heteronormative assumptions dominate. Existing research supports the assertion that patient experience, including the needs of LGBT patients, should be central to service developments. Assumptions about sexual orientation should be avoided and recorded accurately and sensitively, and relational models of care should be promoted at the start of cancer treatment in an appropriate manner. These may assist in reducing the risks of embarrassment or offence to nonheterosexual patients, or to professionals who

  15. Selected papers on analysis and differential equations

    CERN Document Server

    Nomizu, Katsumi

    2003-01-01

    This volume contains translations of papers that originally appeared in the Japanese journal, Sugaku. The papers range over a variety of topics, including nonlinear partial differential equations, C^*-algebras, and Schrödinger operators.

  16. Concentration of bisphenol A in thermal paper

    National Research Council Canada - National Science Library

    Mendum, Ted; Stoler, Emily; VanBenschoten, Helen; Warner, John C

    2011-01-01

    Bisphenol A (BPA) is widely used as a color developer in thermal paper. Thermal paper is ubiquitous in daily life due to its use in cash register receipts, so opportunities for human contact abound...

  17. Open Education. Introduction to selected papers

    Directory of Open Access Journals (Sweden)

    Inés Gil-Jaurena

    2017-06-01

    Full Text Available This issue of Open Praxis compiles selected papers presented at the Open Education Consortium Global Conference, held in Cape Town (South Africa on March 8-10, 2017. Additionaly, the Innovative Practice section includes three papers.

  18. Printability of Synthetic Papers by Electrophotography

    Directory of Open Access Journals (Sweden)

    Rozália Szentgyörgyvölgyi

    2010-04-01

    Full Text Available This paper deals with the printability of synthetic papers by the electrophotography technique. Prints of cmyk colour fields from 20% to 100% raster tone values were printed on three types of synthetic papers (one film synthetic paper and two fiber synthetic papers. The investigation of the appearance included densitometric measurement of the cmyk prints. The results have shown differences in the optical density and optical tone value between cmyk prints made on various synthetic papers. The highest optical density and the increase of the optical tone value were observed on the film synthetic paper, where cmyk prints were more saturated. The highest abrasion resistance of cmyk prints was obtained from the fibre synthetic paper.

  19. Oral Communication. English Language Arts Concept Paper Number 1.

    Science.gov (United States)

    Martin, Robert

    Noting that current students will become citizens of the Information Age, and that much of their social and professional success will depend on their speaking and listening skills, this paper supports the call for required courses in oral communication and proposes components of successful oral communication programs. The introduction describes…

  20. Short Paper: Design Tools, Hybridization Exploring Intuitive Interaction

    NARCIS (Netherlands)

    Wendrich, Robert E.; Kuhlen, Torsten; Coquillart, Sabine; Interrante, Victoria

    2010-01-01

    Design and Design Engineering is about making abstract representations often based on fuzzy notions, ideas or prerequisite requirements with the use of various design tools. This paper introduces an interactive hybrid design tool to assist and support singular design activity or multiple

  1. Next-generation Process Management with ADEPT2 (Demo Paper)

    NARCIS (Netherlands)

    Göser, Kevin; Jurisch, Martin; Acker, Hilmar; Kreher, Ulrich; Lauer, Markus; Rinderle, S.B.; Reichert, M.U.; Dadam, Peter

    Short time-to-market, easy adaptation to changes in business environment, and robustness of processes are key requirements in today’s business world. In the IT area of Business Process Management (BPM), solutions claim to satisfy these new demands, but are still not sufficient. In this paper we

  2. WATER RESISTANCE OF RECYCLED PAPER PANEL

    OpenAIRE

    Alexander Rani Suryandono; Dimas Wihardyanto

    2017-01-01

    Recycled paper has many benefits, from saving woods to reducing carbon footprints. Industrialized recycled paper were mainly made in developed countries. These processes are using high technology and utilize chemical reactions and materials that can only be done in large factories. Meanwhile, paper are also used in developing countries. Newspaper is one of the mass medias that use a high number of paper. Printed newspaper are still used by the majority of people which they prefer rather than ...

  3. The Identification and Comparison of the Requirements Placed on Product Managers during the Recruitment Process

    Directory of Open Access Journals (Sweden)

    Wroblowská Zuzana

    2015-09-01

    Full Text Available The submitted paper focuses on personality traits and behavioural competencies of a key role bearer in product oriented marketing management, generally referred to as product management. An interdisciplinary approach was applied while looking into this subject, since both research into theoretical bases and analysis of the current state of the topic and the tendencies of its development required work in several fields of study. Based on research in the field of secondary data, the assumption was set that a product manager is an example of a knowledge worker of the 21st century and that the business practice sees him/her as such, which has an effect on the requirements a candidate for this position is confronted with in the recruitment process. An independent research project was carried out and it confirmed that product managers are considered to be knowledge workers and that independence and analytical thinking skills were among the most common requirements for product managers both in 2007 and 2014. A comparison of results from 2007 and 2014 also showed some differences. The statistical verification confirmed a shift in requirements within the interpersonal competency group. The findings were used to formulate recommendations for the recruitment strategy and realization of selection for positions in product management.

  4. CALL FOR PAPERS: Progress in Supersymmetric Quantum Mechanics

    Science.gov (United States)

    2003-11-01

    been approved by the Guest Editors as review articles will have a limit of 30 printed pages (18000 words). Papers exceeding these limits may be accepted at the discretion of the Guest Editors. Further advice on publishing your work in Journal of Physics A: Mathematical and General may be found at www.iop.org/Journals/jphysa. bullet Contributions to the Special Issue should if possible be submitted electronically at www.iop.org/Journals/jphysa or by e-mail to jphysa@iop.org, quoting `JPhysA Special Issue -- Statistical Physics of Disordered Systems'. Submissions should ideally be in either standard LaTeX form or Microsoft Word. Please see the web site for further information on electronic submissions. bullet Authors unable to submit electronically may send hard copy contributions to: Publishing Administrators, Journal of Physics A, Institute of Physics Publishing, Dirac House, Temple Back, Bristol BS1 6BE, UK, enclosing the electronic code on floppy disk if available and quoting `JPhysA Special Issue -- Statistical Physics of Disordered Systems'. bullet All contributions should be accompanied by a read-me file or covering letter giving the postal and e-mail addresses for correspondence. The Publishing Office should be notified of any subsequent change of address. This Special Issue will be published in both paper and online editions of the journal. The corresponding author of each contribution will receive a complimentary copy of the issue in addition to the usual 25 free offprints of their article. E Marinari, H Nishimori and F Ricci-Tersenghi Guest Editors

  5. Demonstrating Fluorescence with Neon Paper and Plastic

    Science.gov (United States)

    Birriel, Jennifer J.; Roe, Clarissa

    2015-01-01

    Several papers in this journal have dealt with the fluorescence in orange neon plastic, olive oil, and soda. In each case, the fluorescent emission was excited by either green or violet-blue laser light. In this paper, we examine the fluorescent emission spectra of so-called neon colored papers and plastic clipboards available in department and…

  6. Selected papers on analysis and differential equations

    CERN Document Server

    Society, American Mathematical

    2010-01-01

    This volume contains translations of papers that originally appeared in the Japanese journal Sūgaku. These papers range over a variety of topics in ordinary and partial differential equations, and in analysis. Many of them are survey papers presenting new results obtained in the last few years. This volume is suitable for graduate students and research mathematicians interested in analysis and differential equations.

  7. Computers & Chemical Engineering: Best paper of 2009

    DEFF Research Database (Denmark)

    Venkatasubramanian, Venkat; Gani, Rafiqul

    2011-01-01

    The Editorial Advisory Board of the Journal has assessed the papers published in Volume 33 by means of a three stage process of nomination and balloting. We are pleased to announce that the 2009 Best Paper of the Year Award goes to J.M. Harrold and R.S. Parker for their paper entitled “Clinically...

  8. CCAA Working papers | IDRC - International Development ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Working papers are published by CCAA staff, consultants, advisers, or interns, and are not part of partner-funded research activities. Each paper is peer reviewed by CCAA staff. They are published and distributed primarily in electronic format via the CCAA site, though hardcopies are available upon request. Working papers ...

  9. Constructing a Rhombus through Paper Folding

    Science.gov (United States)

    Duatepe-Paksu, Asuman

    2017-01-01

    This paper presents an example of how paper folding can be used in a geometry class to support conceptual understanding. Specifically, it explains an activity that constructs a rhombus and explores its attributes by using paper folding. The steps of constructing a rhombus are described and some discussion questions are given to consolidate…

  10. 7 CFR 51.1240 - Paper ends.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 2 2010-01-01 2010-01-01 false Paper ends. 51.1240 Section 51.1240 Agriculture Regulations of the Department of Agriculture AGRICULTURAL MARKETING SERVICE (Standards, Inspections, Marketing... Standards for Cleaned Virginia Type Peanuts in the Shell Definitions § 51.1240 Paper ends. Paper ends means...

  11. 76 FR 171 - Paper Clips From China

    Science.gov (United States)

    2011-01-03

    ... COMMISSION Paper Clips From China AGENCY: United States International Trade Commission. ACTION: Institution of a five-year review concerning the antidumping duty order on paper clips from China. SUMMARY: The... on paper clips from China would be likely to lead to continuation or recurrence of material injury...

  12. 76 FR 42730 - Paper Clips From China

    Science.gov (United States)

    2011-07-19

    ... COMMISSION Paper Clips From China Determination On the basis of the record \\1\\ developed in the subject five... order on paper clips from China would be likely to lead to continuation or recurrence of material injury... Publication 4242 (July 2011), entitled Paper Clips from China: Investigation No. 731-TA-663 (Third Review). By...

  13. Electrokinetics with "paper-and-pencil" devices.

    Science.gov (United States)

    Mandal, Pratiti; Dey, Ranabir; Chakraborty, Suman

    2012-10-21

    We demonstrate the occurrence of electrokinetic phenomenon in paper substrates, by developing a simple "paper-and-pencil" device. The underlying electrokinetic phenomenon results in enhanced liquid transport through the paper-fibre matrix, which exhibits significant active electrical controllability and improved repeatability. These bear far-ranging consequences towards opening up a new paradigm of fluidics over small scales.

  14. Working Papers in Art Education, 1992.

    Science.gov (United States)

    Zurmuehlen, Marilyn, Ed.

    1992-01-01

    This publication presents manuscripts and research reports by graduate students. Accompanying papers from their mentors establish a context for the student papers. In this volume the works are organized by the sponsoring university. Student papers presented are: (1) "How Will Moy, Chantale, Susan and Lola Make It through Art School?" (Miriam…

  15. Paper Sludge Reuse in Lightweight Aggregates Manufacturing.

    Science.gov (United States)

    Chen, How-Ji; Hsueh, Ying-Chih; Peng, Ching-Fang; Tang, Chao-Wei

    2016-10-27

    The lightweight aggregates used by the civil engineering market are sintered at a high temperature, about 1200 °C. In times of high energy prices and regulation of carbon dioxide emissions, lightweight aggregate products of the high-temperature process in sales marketing are not readily accepted. This study developed a sintered-type paper sludge lightweight aggregate. In order to reduce energy consumption, substitution of some reservoir sediment clay in paper sludge substitutes is to be expected. The study used two types of paper sludge (green clay paper sludge and paper pulp sludge). The sintering temperature was reduced effectively as the green clay paper sludge was substituted for some of the reservoir sediment clay, and the optimum substitute ranges of green clay paper sludge were 10%-50%. The optimum substitute ranges of the paper pulp sludge were 10%-40%. Test results show that the properties of aggregates have a particle density of 0.66-1.69 g/cm³, a water absorption of 5%-30%, and a loss on ignition of 10%-43%. The loss on ignition of aggregate became greater with the increase in paper sludge content. This means that the calorific value provided by the paper sludge will increase as paper sludge content increases. Paper sludge can therefore be considered a good material to provide heat energy for sintering lightweight aggregate.

  16. Integrating Electronics and Microfluidics on Paper.

    Science.gov (United States)

    Hamedi, Mahiar M; Ainla, Alar; Güder, Firat; Christodouleas, Dionysios C; Fernández-Abedul, M Teresa; Whitesides, George M

    2016-07-01

    Paper microfluidics and printed electronics have developed independently, and are incompatible in many aspects. Monolithic integration of microfluidics and electronics on paper is demonstrated. This integration makes it possible to print 2D and 3D fluidic, electrofluidic, and electrical components on paper, and to fabricate devices using them. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  17. Fertility of male adult rats submitted to forced swimming stress

    Directory of Open Access Journals (Sweden)

    G.Z. Mingoti

    2003-05-01

    Full Text Available We investigated whether stress interferes with fertility during adulthood. Male Wistar rats (weighing 220 g in the beginning of the experiment were forced to swim for 3 min in water at 32ºC daily for 15 days. Stress was assessed by the hot-plate test after the last stressing session. To assess fertility, control and stressed males (N = 15 per group were mated with sexually mature normal females. Males were sacrificed after copulation. Stress caused by forced swimming was demonstrated by a significant increase in the latency of the pain response in the hot-plate test (14.6 ± 1.25 s for control males vs 26.0 ± 1.53 s for stressed males, P = 0.0004. No changes were observed in body weight, testicular weight, seminal vesicle weight, ventral prostate weight or gross histological features of the testes of stressed males. Similarly, no changes were observed in fertility rate, measured by counting live fetuses in the uterus of normal females mated with control and stressed males; no dead or incompletely developed fetuses were observed in the uterus of either group. In contrast, there was a statistically significant decrease in spermatid production demonstrated by histometric evaluation (154.96 ± 5.41 vs 127.02 ± 3.95 spermatids per tubular section for control and stressed rats, respectively, P = 0.001. These data demonstrate that 15 days of forced swimming stress applied to adult male rats did not impair fertility, but significantly decreased spermatid production. This suggests that the effect of stress on fertility should not be assessed before at least the time required for one cycle of spermatogenesis.

  18. Profile of thoracic trauma victims submitted to chest drainage

    Directory of Open Access Journals (Sweden)

    CESAR AUGUSTO BROSKA JÚNIOR

    Full Text Available ABSTRACT Objective: to describe and compare the variables involved in trauma victims undergoing thoracic drainage. Methods: we conducted a retrospective, analytical, descriptive, cross-sectional study, with medical records of patients attended at the Trauma Service of the Curitiba Evangelical University Hospital between February 2011 and January 2014. Results: there were 488 patients undergoing chest drainage, 84.7% men and 15.3% women, with an average age of 38.2 years. Attendances usually occurred at night, without predominance between open or closed mechanism, gender or age group. The majority of patients with thoracic trauma requiring drainage were diagnosed by anamnesis and physical examination (41.1% and drained in the emergency room (80.8%. Most of the patients (66.2% had another associated lesion, mostly some abdominal viscera. Complications were present in 16.6% (81 patients, most of them due to drainage positioning error (9.2%. The mean hospital stay was 15 days and drainage lasted for an average of 8.1 days, with no statistical difference between open and closed trauma. The clinical outcome was discharge in most cases. Conclusion: the profile of patients with thoracic trauma is that of young men, attended at night, with some other associated lesion. Although diagnosis and treatment were rapid and most often without the need for complex examinations, the time of drainage, hospitalization and complications were higher than in the literature, which can be explained by the drainage being made at the Emergency Room and the presence of associated injuries.

  19. Role of various enzymes for deinking paper: a review.

    Science.gov (United States)

    Saxena, Arunika; Singh Chauhan, Prakram

    2017-08-01

    Paper manufacturing industries depend mainly on forests for wood, which is the basic raw material. Forest plays an important role in balancing the ecosystem to protect forest deinking and bleaching (recycling) of waste paper had gained a lot of importance. Conventional chemical deinking processes require large amount of chemicals which are toxic and hazardous to the environment, hence other effective deinking methods are needed. Enzymatic deinking (cellulolytic, hemicellulolytic and ligninolytic) has attracted enormous attention because of high efficacy and minimum environmental impact. For bleaching, enzymatic action (individual as well as in combination), along with physical treatment, makes the pulp more accessible to the chemicals and also to the amount of chemicals required to obtain similar levels of brightness. Strength properties and brightness of the pulp are improved by these treatment methods. With minimum impact on the environment, this review gives comprehensive information about the various methods used for the recycling of waste paper.

  20. Absorption capacity and toxicity of paper points after sterilization

    Directory of Open Access Journals (Sweden)

    Mirian Marubayashi Hidalgo

    2008-01-01

    Full Text Available Objective: To evaluate the influence of the sterilization process on paper cones as regards their absorption capacity, and consequently, root canal drying, in addition to the possible release of any antimicrobial or cytotoxic product. Methods: The cones used were of three of the brands found on the Brazilian market Dentsply (Dentsply Indústria e Comércio Ltda., Petrópolis, Brazil, Endopoints (Endopoints Indústria e Comércio Ltda., Paraíba do Sul, Brazil and Tanari (Tanari Industrial Ltda., São Paulo, Brazil. To evaluate the absorption capacity, the cones were submitted to four sterilization cycles, and the modified Holland technique was performed. The antimicrobial/cytotoxic capacity was verified by means of depositing the sterilized cones in Petri dishes containing Miller-Hinton Agar and Blood Agar, seeded with S.aureus and E. coli. Results: The Dentsply (Dentsply Indústria e Comércio Ltda., Petrópolis, Brazil and Tanari (Tanari Industrial Ltda., São Paulo, Brazilcones presented greater absorption after the first sterilization cycle, followed by a drop in the second and third cycles, and a new increase in the fourth cycle. For the Endopoints (Endopoints Indústria e Comércio Ltda., Paraíba do Sul, Brazil cones, the values were inverted, with a small drop in absorption after the first cycle, increase in the second and third cycles, and a new drop in the fourth cycle. None of the cones presented antimicrobial activity after the sterilization process. Conclusion: The sterilization process by damp heat does not alter the properties of absorption and there is no release of by-products from the tested paper cones.

  1. Entrepreneurial learning requires action

    DEFF Research Database (Denmark)

    Brink, Tove; Madsen, Svend Ole

    2014-01-01

    This paper reveals how managers of small- and medium-sized enterprises (SMEs) can utilise their participation in research-based training. Empirical research from a longitudinal study of 10 SMEs managers in the wind turbine industry is provided to describe a learning approach that SME managers can...... apply in industry. The findings of this study show that SME managers employ a practice-shaped holistic multi- and cross-disciplinary approach to learning. This learning approach is supported by theory dissemination, business challenge applications, and organisational prerequisites. Diversified learning...... that is enhanced by essential large-scale industry players and other SME managers are required to create action and value in learning. An open-mindedness to new learning approaches by SME managers and an open-mindedness to multi- and cross-disciplinary collaboration with SME managers by facilitators is required....

  2. Mechanical performance improvement of electroactive papers

    Science.gov (United States)

    Kim, Jaehwan; Seo, Yung B.; Jung, Eunmi

    2001-07-01

    Electro-Active Paper (EAPap) is a paper that produces large displacement with small force under electrical excitation. EAPap is made with a chemically treated paper by bonding thin aluminum foils on both sides of the paper to comprise electrodes. When electric voltage is applied on the electrodes the EAPap produces bending displacement. However, the displacement output has been unstable and degraded with time scale. To improve the bending performance of EAPap, different paper fibers-broad-leaf, needle-leaf, bacteria cellulose and Korean traditional paper, and additive chemicals are tested. It was observed that needle-leaf paper exhibits better results then others. By eliminating the effect of adhesive layer and selecting a proper paper fiber, the displacement output has been stable with long time scale. The operational principle of EAPap is, we believe, based on the electrostriction effect associated with intermolecular interaction of the constituents of the paper. To confirm this result, more investigation of the paper quality should be followed in the beginning of paper manufacturing process. Since EAPaps are quite simple to fabricate and lightweight, various applications including flexible speakers, active sound absorbing materials and smart shape control devices can be possible.

  3. Ecodesign requirements for televisions

    DEFF Research Database (Denmark)

    Huulgaard, Rikke Dorothea; Dalgaard, Randi; Merciai, Stefano

    2013-01-01

    to analyse if other environmental hotspots and life cycle phases should be included in the requirements in the IM of the Ecodesign Directive besides energy consumption in the use phase analysis. Methods The consequential approach is used. The data for the LCA have been gathered from two manufacturers of TVs....... In one case, the data were delivered in Excel spreadsheets; in the other case, the authors of this paper together with the manufacturer disassembled a TV and collected the data manually. Results and discussion When applying the consequential approach, the production phase has the highest environmental...

  4. Processing and Structure of Carbon Nanofiber Paper

    Directory of Open Access Journals (Sweden)

    Zhongfu Zhao

    2009-01-01

    Full Text Available A unique concept of making nanocomposites from carbon nanofiber paper was explored in this study. The essential element of this method was to design and manufacture carbon nanofiber paper with well-controlled and optimized network structure of carbon nanofibers. In this study, carbon nanofiber paper was prepared under various processing conditions, including different types of carbon nanofibers, solvents, dispersants, and acid treatment. The morphologies of carbon nanofibers within the nanofiber paper were characterized with scanning electron microscopy (SEM. In addition, the bulk densities of carbon nanofiber papers were measured. It was found that the densities and network structures of carbon nanofiber paper correlated to the dispersion quality of carbon nanofibers within the paper, which was significantly affected by papermaking process conditions.

  5. Hygroscopic behaviour of paper and books

    DEFF Research Database (Denmark)

    Derluyn, Hannelore; Janssen, Hans; Diepens, Jan

    2007-01-01

    This study presents experimental analysis and numerical modeling of hygroscopic moisture buffering by paper and books. First, a literature review of moisture transport properties of paper is presented. Experimental work on two paper types includes SEM analysis of the paper structure, determination...... and not on the relative humidity. Books consist of several paper sheets with air layers between the sheets. To take the air layers into account, a parallel transport model is proposed to determine the effective moisture transport properties of books taking into account the air layers. The dynamic hygroscopic behavior...... of small book samples was measured. It is shown that, although the water vapor permeability of different paper types can be quite different, the effusivity of a book highly depends on the presence of the air layers and can therefore remain comparable for different paper types....

  6. Design and analysis of sustainable paper bicycle

    Science.gov (United States)

    Roni Sahroni, Taufik; Nasution, Januar

    2017-12-01

    This paper presents the design of sustainable paper bicycle which describes the stage by stage in the production of paper bicycle. The objective of this project is to design a sustainable paper bicycles to be used for children under five years old. The design analysis emphasizes in screening method to ensure the design fulfil the safety purposes. The evaluation concept is presented in designing a sustainable paper bicycle to determine highest rating. Project methodology is proposed for developing a sustainable paper bicycle. Design analysis of pedal, front and rear wheel, seat, and handle were presented using AutoCAD software. The design optimization was performed to fulfil the safety factors by modifying the material size and dimension. Based on the design analysis results, it is found that the optimization results met the factor safety. As a result, a sustainable paper bicycle was proposed for children under five years old.

  7. Print Station Operation. Microcomputing Working Paper Series.

    Science.gov (United States)

    Wozny, Lucy Anne

    During the academic year 1983-84, Drexel University instituted a new policy requiring all incoming students to have access to a microcomputer. The computer chosen to fulfill this requirement was the Macintosh from Apple Computer, Inc. Although this requirement put an additional financial burden on the Drexel student, the university administration…

  8. Curated Collections for Educators: Five Key Papers about Program Evaluation.

    Science.gov (United States)

    Thoma, Brent; Gottlieb, Michael; Boysen-Osborn, Megan; King, Andrew; Quinn, Antonia; Krzyzaniak, Sara; Pineda, Nicolas; Yarris, Lalena M; Chan, Teresa

    2017-05-04

    The evaluation of educational programs has become an expected part of medical education. At some point, all medical educators will need to critically evaluate the programs that they deliver. However, the evaluation of educational programs requires a very different skillset than teaching. In this article, we aim to identify and summarize key papers that would be helpful for faculty members interested in exploring program evaluation. In November of 2016, the 2015-2016 Academic life in emergency medicine (ALiEM) Faculty Incubator program highlighted key papers in a discussion of program evaluation. This list of papers was augmented with suggestions by guest experts and by an open call on Twitter. This resulted in a list of 30 papers on program evaluation. Our authorship group then engaged in a process akin to a Delphi study to build consensus on the most important papers about program evaluation for medical education faculty. We present our group's top five most highly rated papers on program evaluation. We also summarize these papers with respect to their relevance to junior medical education faculty members and faculty developers. Program evaluation is challenging. The described papers will be informative for junior faculty members as they aim to design literature-informed evaluations for their educational programs.

  9. Fluid heating system (SAF®): effects on clinical and biochemistry parameters in dogs submitted to inhalatory anesthesia

    OpenAIRE

    Atayde, Ingrid Bueno; Franco, Leandro Guimarães; Silva,Marco Augusto Machado; Soares, Lorena Karine; Bittencourt, João Bosco; Fioravanti, Maria Clorinda Soares; Borges, Alinne Cardoso; Silva,Luiz Antônio Franco da

    2009-01-01

    PURPOSE: To evaluate and describe immediate effects of the infusion of saline solution heated by SAF® in bitches submitted to halothane anesthesia. METHODS: Thirteen bitches were employed and submitted to elective ovariohysterectomy in acclimatized operating room at 22ºC, allocated in two groups: GI, which received non-heated fluid and GII, which received fluid heated at 37ºC by SAF®. The following parameters were evaluated in 30-minutes intervals (M0, M30, M60 and M90): rectal and cutaneous ...

  10. Profile of thoracic trauma victims submitted to chest drainage.

    Science.gov (United States)

    Broska, Cesar Augusto; Botelho, Adriane Barbosa; Linhares, André DE Castro; DE-Oliveria, Mariana Santos; Veronese, Gabriela; Naufel, Carlos Roberto; Batista, Lislaine Cruz; Diogo, Maria Angélica Kurpel

    2017-01-01

    to describe and compare the variables involved in trauma victims undergoing thoracic drainage. we conducted a retrospective, analytical, descriptive, cross-sectional study, with medical records of patients attended at the Trauma Service of the Curitiba Evangelical University Hospital between February 2011 and January 2014. there were 488 patients undergoing chest drainage, 84.7% men and 15.3% women, with an average age of 38.2 years. Attendances usually occurred at night, without predominance between open or closed mechanism, gender or age group. The majority of patients with thoracic trauma requiring drainage were diagnosed by anamnesis and physical examination (41.1%) and drained in the emergency room (80.8%). Most of the patients (66.2%) had another associated lesion, mostly some abdominal viscera. Complications were present in 16.6% (81 patients), most of them due to drainage positioning error (9.2%). The mean hospital stay was 15 days and drainage lasted for an average of 8.1 days, with no statistical difference between open and closed trauma. The clinical outcome was discharge in most cases. the profile of patients with thoracic trauma is that of young men, attended at night, with some other associated lesion. Although diagnosis and treatment were rapid and most often without the need for complex examinations, the time of drainage, hospitalization and complications were higher than in the literature, which can be explained by the drainage being made at the Emergency Room and the presence of associated injuries. descrever e comparar as variáveis envolvidas nos pacientes vítimas de trauma torácico submetidos à drenagem de tórax. estudo transversal descritivo analítico retrospectivo realizado com prontuários de pacientes atendidos no Serviço de Trauma do Hospital Universitário Evangélico de Curitiba entre fevereiro de 2011 e janeiro de 2014. neste período foram atendidos 488 pacientes, 84,7% homens e 15,3% mulheres, com média de idade de 38,2 anos

  11. EDITORIAL: Announcing the 2010 Measurement Science and Technology Outstanding Paper Awards Announcing the 2010 Measurement Science and Technology Outstanding Paper Awards

    Science.gov (United States)

    Foss, John; Dewhurst, Richard; Fujii, Kenichi; Regtien, Paul

    2011-06-01

    Since 1991, Measurement Science and Technology has awarded a Best Paper prize. The Editorial Board of this journal believes that such a prize is an opportunity to thank authors for submitting their work, and serves as an integral part of the on-going quality review of the journal. The current breadth of topical areas that are covered by MST has made it advisable to expand the recognition of excellent publications. Hence, since 2005 the Editorial Board have presented 'Outstanding Paper Awards' in four subject categories: Fluid Mechanics; Measurement Science; Precision Measurements; and Sensors and Sensing Systems. Although the categories mirror subject sections in the journal, the Editorial Board consider articles from all categories in the selection process. This year, for example, the winning article of the Outstanding Paper Award in Sensors and Sensing Systems was an article published in the 'Novel Instrumentation' section. 2010 Award Winners—Fluid Mechanics Assessment of pressure field calculations from particle image velocimetry measurements John J Charonko, Cameron V King, Barton L Smith and Pavlos P Vlachos Department of Mechanical Engineering, Virginia Tech, Blacksburg, VA 24060, USA VT-WFU School of Biomedical Engineering & Sciences, Virginia Tech, Blacksburg, VA 24060, USA Mechanical and Aerospace Engineering Department, Utah State University, UMC4130, Logan, UT 84322, USA Measuring p(t) in the interior of a flow field is one of the most challenging measurements in our field of study. An accurate knowledge of these interior pressures is of considerable value for fundamental studies. Since the gradient of the pressure appears in the Navier-Stokes equations, a knowledge of the pressure at a bounding surface followed by operations on the measured velocity components within the flow field can be analytically related to the pressure at an interior location. Bringing this long-recognized possibility to operational status has been greatly aided by the advent of

  12. 48 CFR 15.403-3 - Requiring data other than certified cost or pricing data.

    Science.gov (United States)

    2010-10-01

    ... reasonable price when there is not adequate price competition; (iv) Require that the data submitted by the... award is not made. (b) Adequate price competition. When adequate price competition exists (see 15.403-1... reasonable price; (ii) Require submission of data other than certified cost or pricing data, as defined in 2...

  13. 75 FR 16347 - Medical Devices; Pediatric Uses of Devices; Requirement for Submission of Information on...

    Science.gov (United States)

    2010-04-01

    ... Administration (FDA) is amending the regulations on premarket approval of medical devices to include requirements... HUMAN SERVICES Food and Drug Administration 21 CFR Part 814 RIN 0910-AG29 Medical Devices; Pediatric... U.S.C. 360e-1). Section 515A(a) of the act requires persons who submit certain medical device...

  14. 10 CFR 590.103 - General requirements for filing documents with FE.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false General requirements for filing documents with FE. 590.103... General requirements for filing documents with FE. (a) Any document, including but not limited to an... any exhibit submitted in connection with such documents, shall be filed with FE under this part. Such...

  15. 40 CFR 86.094-26 - Mileage and service accumulation; emission requirements.

    Science.gov (United States)

    2010-07-01

    ... description and specification information required by the Administrator, to the Administrator following the... information shall be submitted, including the vehicle (or engine) description and specification information...) that no testing is required. (B) Emission tests for emission data vehicle(s) selected for testing under...

  16. WATER RESISTANCE OF RECYCLED PAPER PANEL

    Directory of Open Access Journals (Sweden)

    Alexander Rani Suryandono

    2017-06-01

    Alice Wisler (2015 Facts about Recycling Paper. http://greenliving.lovetoknow.com/Facts_About_Recycling_Paper. Accessed 2 April 2016 Clay Miller (2011 5 Benefits of Recycling Paper. http://www.ways2gogreenblog.com/2011/09/28/5-benefits-of-recycling-paper/. Accessed 10 May 2016 Hari Goyal (2015 Grades of Paper. http://www.paperonweb.com/grade.htm. Accessed 2 April 2016 Hari Goyal (2015 Properties of Paper. http://www.paperonweb.com/paperpro.htm. Accessed 2 April 2016 Kathryn Sukalich (2016 Everything You Need to Know about Paper Recycling. http://earth911.com/business-policy/business/paper-recycling-details-basics/. Accessed 15 July 2016 [U1] Larry West (2015 Why Recycle Paper. http://environment.about.com/od/recycling/a/The-Benefits-Of-Paper-Recycling-Why-Recycle-Paper.htm. Accesed 15 June 2016 Marie-Luise Blue (2008 The Advantages of Recycling Paper. http://education.seattlepi.com/advantages-recycling-paper-3440.html. Accessed 15 June 2016 Nina Spitzer (2009 http://www.sheknows.com/home-and-gardening/articles/810025/the-impact-of-disposable-coffee-cups-on-the-environment. Accessed 15 June 2016 Radio New Zealand (2010 Iwi not Giving Up Fight against Tasman Mill Discharges. http://www.radionz.co.nz/news/regional/64521/iwi-not-giving-up-fight-against-tasman-mill-discharges. Accessed 15 July 2016 Rick LeBlanc (2016 Paper Recycling Facts, Figures and Information Sources. https://www.thebalance.com/paper-recycling-facts-figures-and-information-sources-2877868?_ga=1.192832942.544061388.1477446686. Accesed 2 April 2016 Robinson Meyer (2016 Will More Newspapers Go Nonprofit? http://www.theatlantic.com/technology/archive/2016/01/newspapers-philadelphia-inquirer-daily-news-nonprofit-lol-taxes/423960/. Accessed 3 August 2016 School of Engineering at Darthmouth (2010 Forest and Paper Industry. http://engineering.dartmouth.edu/~d30345d/courses/engs171/Paper.pdf. Accessed 2 April 2016 T. Subramani, V. Angappan. (2015. Experimental Investigation of Papercrete Concrete

  17. Preparation of electrophoretic nanoparticles for electronic paper.

    Science.gov (United States)

    Meng, Xianwei; Qiang, Li; Wei, Jianfei; Shi, Haitang

    2014-02-01

    As an electronic alternative for printed media, the E-paper has ultralow power consumption, reduced eyestrain, high contrast ratio. Electrophoretic displays are one of the most promising E-paper technologies, which are now widely used in consumer products. The properties of the electrophoretic display are mainly determined by the composition, size, light scattering properties, and density of the electrophoretic nanoparticles. First, we introduce the preparation of white and black electrophoretic nanoparticles, because the monochrome E-paper has achieved commercial success. Then the structure and properties of color electrophoretic nanoparticles for color E-paper products are discussed. In addition, the enhanced and novel electrophoretic nanoparticles are now propelling the development of next-generation E-paper with new applications. Finally, the active area of the preparation of electrophoretic nanoparticles is highlighted in terms of the development of future E-paper.

  18. Semantically Detecting Plagiarism for Research Papers

    OpenAIRE

    Reena Kharat, Preeti M. Chavan, Vaibhav Jadhav, Kuldeep Rakibe

    2013-01-01

    Plagiarism means copying of published work without proper acknowledgement of source. Plagiarism is a major concern, in an academic environment, which affects both the credibility of institutions as well as its ability to ensure quality of its student. Plagiarism detection of research papers deals with checking similarities with other research papers. Manual methods cannot be used for checking research papers, as the assigned reviewer may have inadequate knowledge in the research disciplines. ...

  19. How to Write a Great Research Paper, and Get it Accepted by a Good Journal.

    Science.gov (United States)

    Newman, Anthony

    2014-10-01

    Knowing the best way of structuring your paper when writing it, and the most appropriate journal to send it to, really helps in getting your paper accepted. Also understanding how editors and publishers think and what they expect, and knowing how the peer review process works, is invaluable insight into the publishing process. After attending this two hour workshop, one in the Elsevier Publishing Connect Workshop series, participants will have a clear idea of the steps needed to be taken before starting to write a paper. They will also be able to plan writing manuscripts using the logical step sequence - not the sequence in which the paper will be read. Authors are also made aware of what aspects of their papers Editors and Publishers look at critically, and to ensure that in taking care of these areas, their papers are much more likely to be accepted. Dealing with referees' comments and the art of polite rebuttal are also described such that these can be used to improve the submitted paper suitably. Sensitive areas such as publishing ethics, plagiarism, duplicate publishing, etc are also clearly explained such that participants have a clear understanding of what is allowed, and what is not permitted. These insights into the publishing process will enable the participants to be more confident as an author in the world of science publishing, and will help them get their papers published more easily. Copyright © 2014. Published by Elsevier Inc.

  20. Effects of printing and ninhydrin treatment on forensic analysis of paper.

    Science.gov (United States)

    Itamiya, Hiromi; Sugita, Ritsuko

    2015-10-01

    Paper is ubiquitous in human activities and can be found as evidence in the commission of many crimes such as threatening letters, deceptive advertisements and counterfeiting banknotes. To link the paper evidence to a source is a comparative process that is hampered when a blank paper is compared to a paper that has been submitted to printing or other treatments such as ninhydrin for the detection of fingermarks. During a forensic investigation, printed paper is analyzed with various instruments after fingerprint examination. In this study, the effects of printing and ninhydrin treatment on forensic paper examination of grammage, thickness, fillers, and pulp composition were studied. Grammage and thickness were increased by full-page double-sided printing, and grammage depended on the type of printer. The effects of printing on the analytical data about fillers and pulp composition were negligible, and ninhydrin treatment affected only paper thickness. These minor effects notwithstanding, the results indicate that conventional analytical methods used in forensic science for examining papers can be applied. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.