Development of sub-channel code SACoS and its application in coupled neutronics/thermal hydraulics system for SCWR

International Nuclear Information System (INIS)

Chaudri, Khurrum Saleem; Su Yali; Chen Ronghua; Tian Wenxi; Su Guanghui; Qiu Suizheng

2012-01-01

Highlights: ► A tool is developed for coupled neutronics/thermal-hydraulic analysis for SCWR. ► For thermal hydraulic analysis, a sub-channel code SACoS is developed and verified. ► Coupled analysis agree quite well with the reference calculations. ► Different choice of important parameters makes huge difference in design calculations. - Abstract: Supercritical Water Reactor (SCWR) is one of the promising reactors from the list of fourth generation of nuclear reactors. High thermal efficiency and low cost of electricity make it an attractive option in the era of growing energy demand. An almost seven fold density variation for coolant/moderator along the active height does not allow the use of constant density assumption for design calculations, as used for previous generations of reactors. The advancement in computer technology gives us the superior option of performing coupled analysis. Thermal hydraulics calculations of supercritical water systems present extra challenges as not many computational tools are available to perform that job. This paper introduces a new sub-channel code called Sub-channel Analysis Code of SCWR (SACoS) and its application in coupled analyses of High Performance Light Water Reactor (HPLWR). SACoS can compute the basic thermal hydraulic parameters needed for design studies of a supercritical water reactor. Multiple heat transfer and pressure drop correlations are incorporated in the code according to the flow regime. It has the additional capability of calculating the thermal hydraulic parameters of moderator flowing in water box and between fuel assemblies under co-current or counter current flow conditions. Using MCNP4c and SACoS, a coupled system has been developed for SCWR design analyses. The developed coupled system is verified by performing and comparing HPLWR calculations. The results were found to be in very good agreement. Significant difference between the results was seen when Doppler feedback effect was included in

Sub-channel/system coupled code development and its application to SCWR-FQT loop

International Nuclear Information System (INIS)

Liu, X.J.; Cheng, X.

2015-01-01

Highlights: • A coupled code is developed for SCWR accident simulation. • The feasibility of the code is shown by application to SCWR-FQT loop. • Some measures are selected by sensitivity analysis. • The peak cladding temperature can be reduced effectively by the proposed measures. - Abstract: In the frame of Super-Critical Reactor In Pipe Test Preparation (SCRIPT) project in China, one of the challenge tasks is to predict the transient performance of SuperCritical Water Reactor-Fuel Qualification Test (SCWR-FQT) loop under some accident conditions. Several thermal–hydraulic codes (system code, sub-channel code) are selected to perform the safety analysis. However, the system code cannot simulate the local behavior of the test bundle, and the sub-channel code is incapable of calculating the whole system behavior of the test loop. Therefore, to combine the merits of both codes, and minimizes their shortcomings, a coupled sub-channel and system code system is developed in this paper. Both of the sub-channel code COBRA-SC and system code ATHLET-SC are adapted to transient analysis of SCWR. Two codes are coupled by data transfer and data adaptation at the interface. In the new developed coupled code, the whole system behavior including safety system characteristic is analyzed by system code ATHLET-SC, whereas the local thermal–hydraulic parameters are predicted by the sub-channel code COBRA-SC. The codes are utilized to get the local thermal–hydraulic parameters in the SCWR-FQT fuel bundle under some accident case (e.g. a flow blockage during LOCA). Some measures to mitigate the accident consequence are proposed by the sensitivity study and trialed to demonstrate their effectiveness in the coupled simulation. The results indicate that the new developed code has good feasibility to transient analysis of supercritical water-cooled test. And the peak cladding temperature caused by blockage in the fuel bundle can be reduced effectively by the safety measures

Sub-channel/system coupled code development and its application to SCWR-FQT loop

Energy Technology Data Exchange (ETDEWEB)

Liu, X.J., E-mail: xiaojingliu@sjtu.edu.cn [School of Nuclear Science and Engineering, Shanghai Jiao Tong University, 800 Dong Chuan Road, Shanghai 200240 (China); Cheng, X. [Institute of Fusion and Reactor Technology, Karlsruhe Institute of Technology, Vincenz-Prießnitz-Str. 3, 76131 Karlsruhe (Germany)

2015-04-15

Highlights: • A coupled code is developed for SCWR accident simulation. • The feasibility of the code is shown by application to SCWR-FQT loop. • Some measures are selected by sensitivity analysis. • The peak cladding temperature can be reduced effectively by the proposed measures. - Abstract: In the frame of Super-Critical Reactor In Pipe Test Preparation (SCRIPT) project in China, one of the challenge tasks is to predict the transient performance of SuperCritical Water Reactor-Fuel Qualification Test (SCWR-FQT) loop under some accident conditions. Several thermal–hydraulic codes (system code, sub-channel code) are selected to perform the safety analysis. However, the system code cannot simulate the local behavior of the test bundle, and the sub-channel code is incapable of calculating the whole system behavior of the test loop. Therefore, to combine the merits of both codes, and minimizes their shortcomings, a coupled sub-channel and system code system is developed in this paper. Both of the sub-channel code COBRA-SC and system code ATHLET-SC are adapted to transient analysis of SCWR. Two codes are coupled by data transfer and data adaptation at the interface. In the new developed coupled code, the whole system behavior including safety system characteristic is analyzed by system code ATHLET-SC, whereas the local thermal–hydraulic parameters are predicted by the sub-channel code COBRA-SC. The codes are utilized to get the local thermal–hydraulic parameters in the SCWR-FQT fuel bundle under some accident case (e.g. a flow blockage during LOCA). Some measures to mitigate the accident consequence are proposed by the sensitivity study and trialed to demonstrate their effectiveness in the coupled simulation. The results indicate that the new developed code has good feasibility to transient analysis of supercritical water-cooled test. And the peak cladding temperature caused by blockage in the fuel bundle can be reduced effectively by the safety measures

Impact of CO{sub 2} hydrates on ocean carbon dioxide deposition options

Energy Technology Data Exchange (ETDEWEB)

Lund, P C

1995-04-01

The objective of the research project described in this report was to contribute to the research on greenhouse gases and the global environment. The focus is on the concept of storing large amounts of CO{sub 2} in the ocean. The project was divided into three subtasks: (1) a comprehensive study of the thermodynamic, physical and chemical properties of the seawater/CO{sub 2}/hydrate system, (2) establishment of a micro-scale kinetic model for CO{sub 2} hydrate formation and stability, based on (1), and (3) establishment of macro-scale models for various ocean deposition options based on (2). A database of selected thermodynamic functions has been set up. A large database of oceanic data has also been made; for any given coordinates at sea a computer program provides the temperature, salinity and oxygen profiles from the sea surface to the sea floor. The kinetic model predicts the formation and pseudo-stability of a very thin hydrate film which acts as an inhibitor for diffusion of CO{sub 2} into the sea water. The model predicts that the hydrate film reduces the overall flux from a liquid CO{sub 2} source with about 90%. Thermodynamically, pure CO{sub 2} in contact with water might form hydrates at depths below about 400 m, which would indicate that hydrate formation could play a role for all ocean CO{sub 2} deposition options. However, this study shows that other mechanisms significantly reduce the role of hydrate formation. It is finally concluded that although more modelling and experimental work is required within this field of research, the hydrate film may play an important role for all options except from shallow water injection. 86 refs., 32 figs., 16 tabs.

76 FR 60108 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Science.gov (United States)

2011-09-28

... the following: (1) User acronym, (2) login ID, or (3) sub-account code. Each Market-Maker is assigned... login IDs or sub-account codes. A login ID is the session through which a Market-Maker routes orders to the Exchange. A Market-Maker may elect to use different login IDs to route different types of...

Study and application of Dot 3.5 computer code in radiation shielding problems

International Nuclear Information System (INIS)

Otto, A.C.; Mendonca, A.G.; Maiorino, J.R.

1983-01-01

The application of nuclear transportation code S sub(N), Dot 3.5, to radiation shielding problems is revised. Aiming to study the better available option (convergence scheme, calculation mode), of DOT 3.5 computer code to be applied in radiation shielding problems, a standard model from 'Argonne Code Center' was selected and a combination of several calculation options to evaluate the accuracy of the results and the computational time was used, for then to select the more efficient option. To illustrate the versatility and efficacy in the application of the code for tipical shielding problems, the streaming neutrons calculation along a sodium coolant channel is ilustrated. (E.G.) [pt

Accounting Education Approach in the Context of New Turkish Commercial Code and Turkish Accounting Standards

OpenAIRE

Cevdet Kızıl; Ayşe Tansel Çetin; Ahmed Bulunmaz

2014-01-01

The aim of this article is to investigate the impact of new Turkish commercial code and Turkish accounting standards on accounting education. This study takes advantage of the survey method for gathering information and running the research analysis. For this purpose, questionnaire forms are distributed to university students personally and via the internet.This paper includes significant research questions such as “Are accounting academicians informed and knowledgeable on new Turkish commerc...

Counter flow induced draft cooling tower option for supercritical carbon dioxide Brayton cycle

Energy Technology Data Exchange (ETDEWEB)

Pidaparti, Sandeep R., E-mail: sandeep.pidaparti@gmail.com [Georgia Institute of Technology, George W. Woodruff School of Mechanical Engineering, Atlanta, GA 30332 (United States); Moisseytsev, Anton; Sienicki, James J. [Argonne National Laboratory, 9700 South Cass Avenue, Argonne, IL 60439 (United States); Ranjan, Devesh, E-mail: devesh.ranjan@me.gatech.edu [Georgia Institute of Technology, George W. Woodruff School of Mechanical Engineering, Atlanta, GA 30332 (United States)

2015-12-15

Highlights: • A code was developed to investigate the various aspects of using cooling tower for S-CO{sub 2} Brayton cycles. • Cooling tower option to reject heat is quantitatively compared to the direct water cooling and dry air cooling options. • Optimum water conditions resulting in minimal plant capital cost per unit power consumption are calculated. - Abstract: A simplified qualitative analysis was performed to investigate the possibility of using counter flow induced draft cooling tower option to reject heat from the supercritical carbon dioxide Brayton cycle for advanced fast reactor (AFR)-100 and advanced burner reactor (ABR)-1000 plants. A code was developed to estimate the tower dimensions, power and water consumption, and to perform economic analysis. The code developed was verified against a vendor provided quotation and is used to understand the effect of ambient air and water conditions on the design of cooling tower. The calculations indicated that there exists optimum water conditions for given ambient air conditions which will result in minimum power consumption, thereby increasing the cycle efficiency. A cost-based optimization technique is used to estimate the optimum water conditions which will improve the overall plant economics. A comparison of different cooling options for the S-CO{sub 2} cycle indicated that the cooling tower option is a much more practical and economical option compared to the dry air cooling or direct water cooling options.

76 FR 68798 - Self-Regulatory Organizations; Chicago Board Options Exchange, Incorporated; Notice of Filing and...

Science.gov (United States)

2011-11-07

... order share any of the following: (1) User acronym, (2) login ID, or (3) sub-account code. Each Market... multiple different login IDs or sub-account codes. A login ID is the session through which a Market-Maker routes orders to the Exchange. A Market-Maker may elect to use different login IDs to route different...

Analysis of UO{sub 2}-BeO fuel under transient using fuel performance code

Energy Technology Data Exchange (ETDEWEB)

Gomes, Daniel S.; Abe, Alfredo Y.; Muniz, Rafael O.R.; Giovedi, Claudia, E-mail: dsgomes@ipen.br, E-mail: alfredo@ctmsp.mar.mil.br, E-mail: rafael.orm@gmail.com, E-mail: claudia.giovedi@ctmsp.mar.mil.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Universidade de São Paulo (USP), São Paulo, SP (Brazil). Departamento de Engenharia Naval e Oceânica

2017-11-01

Recent research has appointed the need to replace the classic fuel concept, used in light water reactors. Uranium dioxide has a weak point due to the low thermal conductivity, that produce high temperatures on the fuel. The ceramic composite fuel formed of uranium dioxide (UO{sub 2}), with the addition of beryllium oxide (BeO), presents high thermal conductivity compared with UO{sub 2}. The oxidation of zirconium generates hydrogen gas that can create a detonation condition. One of the preferred options are the ferritic alloys formed of iron-chromium and aluminum (FeCrAl), that should avoid the hydrogen release due to oxidation. In general, the FeCrAl alloys containing 10 - 20Cr, 3 - 5Al, and 0 - 0.12Y in weight percent. The FeCrAl alloys should exhibit a slow oxidation kinetics due to chemical composition. Resistance to oxidation in the presence of steam is improved as a function of the content of chromium and aluminum. In this way, the thermal and mechanical properties of the UO{sub 2}-BeO-10%vol, composite fuel were coupled with FeCrAl alloys and added to the fuel codes. In this work, we examine the fuel rod behavior of UO{sub 2}-10%vol-BeO/FeCrAl, including a simulated transient of reactivity. The fuels behavior shown reduced temperature with UO{sub 2}-BeO/Zr, UO{sub 2}-BeO/FeCrAl also were compared with UO{sub 2}/Zr system. The case reactivity initiated accident analyzed, reproducing the fuel rod called VA-1 using UO{sub 2}/Zr alloys and compared with UO{sub 2}-BeO/FeCrAl. (author)

Procedure and code for calculating black control rods taking into account epithermal absorption, code CAS-1

International Nuclear Information System (INIS)

Martinc, R.; Trivunac, N.; Zivkovic, Z.

1964-12-01

This report describes the computer code CAS-1, calculation method and procedure applied for calculating the black control rods taking into account the epithermal neutron absorption. Results obtained for supercell method applied for regular lattice reflected in the multiplication medium is part of this report in addition to the computer code manual

76 FR 60102 - Self-Regulatory Organizations; C2 Options Exchange, Incorporated; Notice of Filing and Immediate...

Science.gov (United States)

2011-09-28

... the following: (1) User acronym, (2) login ID, or (3) sub-account code. Each Market-Maker is assigned... login IDs or sub-account codes. A login ID is the session through which a Market-Maker routes orders to the Exchange. A Market-Maker may elect to use different login IDs to route different types of...

Optional accounting criteria under IFRSs and corporate characteristics: evidence from spain

Directory of Open Access Journals (Sweden)

Juana Aledo Martínez

2011-01-01

Full Text Available The adoption of the IFRSs by EU member States in 2005 represents one of the most relevant events that have taken place to achieve the convergence of international accounting standards. In this article, we examine the annual reports of the groups listed on the Spanish Continuous Market that adopted IFRSs in 2005 in order to determine the optional accounting criteria they apply under IFRSs and, secondly, identify corporate characteristics affecting these choices. Because there are important differences across countries as a consequence of different institutional frameworks, the mandatory IFRSs adoption is an opportunity to analyze its economic effects. The main finding of this study is that Spanish groups apply the most conservative criteria to limit the number of changes they introduce related to the previous local GAAP, particularly in regards to presentation and measurement options. Additionally, we find that corporate characteristics such as industry, return on equity, size and type of audit firm (Big Four vs. non-Big Four influence the choice of accounting methods used to prepare their financial statements. The analysis of these results provides a basis for discussion between responsible international standard setters (such as IASB and FASB and regulators to work towards the convergence's goals.

Potential GHG mitigation options for agriculture in China

Energy Technology Data Exchange (ETDEWEB)

Erda, Lin; Yue, Li; Hongmin, Dong [Agrometeorology Institute, Beijing (China)

1996-12-31

Agriculture contributes more or less to anthropogenic emissions of carbon dioxide (CO{sub 2}), methane (CH{sub 4}), and nitrous oxide (N{sub 2}O). China`s agriculture accounts for about 5-15% of total emissions for these gases. Land-use changes related to agriculture are not major contributors in China. Mitigation options are available that could result in significant decrease in CH{sub 4} and N{sub 2}O emissions from agricultural systems. If implemented, they are likely to increase crop and animal productivity. Implementation has the potential to decrease CH{sub 4} emissions from rice, ruminants, and animal waste by 4-40%. The key to decreasing N{sub 2}O emissions is improving the efficiency of plant utilization of fertilizer N. This could decrease N{sub 2}O emissions from agriculture by almost 20%. Using animal waste to produce CH{sub 4} for energy and digested manure for fertilizer may at some time be cost effective. Economic analyses of options proposed should show positive economic as well as environmental benefits.

Combating QR-Code-Based Compromised Accounts in Mobile Social Networks.

Science.gov (United States)

Guo, Dong; Cao, Jian; Wang, Xiaoqi; Fu, Qiang; Li, Qiang

2016-09-20

Cyber Physical Social Sensing makes mobile social networks (MSNs) popular with users. However, such attacks are rampant as malicious URLs are spread covertly through quick response (QR) codes to control compromised accounts in MSNs to propagate malicious messages. Currently, there are generally two types of methods to identify compromised accounts in MSNs: one type is to analyze the potential threats on wireless access points and the potential threats on handheld devices' operation systems so as to stop compromised accounts from spreading malicious messages; the other type is to apply the method of detecting compromised accounts in online social networks to MSNs. The above types of methods above focus neither on the problems of MSNs themselves nor on the interaction of sensors' messages, which leads to the restrictiveness of platforms and the simplification of methods. In order to stop the spreading of compromised accounts in MSNs effectively, the attacks have to be traced to their sources first. Through sensors, users exchange information in MSNs and acquire information by scanning QR codes. Therefore, analyzing the traces of sensor-related information helps to identify the compromised accounts in MSNs. This paper analyzes the diversity of information sending modes of compromised accounts and normal accounts, analyzes the regularity of GPS (Global Positioning System)-based location information, and introduces the concepts of entropy and conditional entropy so as to construct an entropy-based model based on machine learning strategies. To achieve the goal, about 500,000 accounts of Sina Weibo and about 100 million corresponding messages are collected. Through the validation, the accuracy rate of the model is proved to be as high as 87.6%, and the false positive rate is only 3.7%. Meanwhile, the comparative experiments of the feature sets prove that sensor-based location information can be applied to detect the compromised accounts in MSNs.

Combating QR-Code-Based Compromised Accounts in Mobile Social Networks

Directory of Open Access Journals (Sweden)

Dong Guo

2016-09-01

Full Text Available Cyber Physical Social Sensing makes mobile social networks (MSNs popular with users. However, such attacks are rampant as malicious URLs are spread covertly through quick response (QR codes to control compromised accounts in MSNs to propagate malicious messages. Currently, there are generally two types of methods to identify compromised accounts in MSNs: one type is to analyze the potential threats on wireless access points and the potential threats on handheld devices’ operation systems so as to stop compromised accounts from spreading malicious messages; the other type is to apply the method of detecting compromised accounts in online social networks to MSNs. The above types of methods above focus neither on the problems of MSNs themselves nor on the interaction of sensors’ messages, which leads to the restrictiveness of platforms and the simplification of methods. In order to stop the spreading of compromised accounts in MSNs effectively, the attacks have to be traced to their sources first. Through sensors, users exchange information in MSNs and acquire information by scanning QR codes. Therefore, analyzing the traces of sensor-related information helps to identify the compromised accounts in MSNs. This paper analyzes the diversity of information sending modes of compromised accounts and normal accounts, analyzes the regularity of GPS (Global Positioning System-based location information, and introduces the concepts of entropy and conditional entropy so as to construct an entropy-based model based on machine learning strategies. To achieve the goal, about 500,000 accounts of Sina Weibo and about 100 million corresponding messages are collected. Through the validation, the accuracy rate of the model is proved to be as high as 87.6%, and the false positive rate is only 3.7%. Meanwhile, the comparative experiments of the feature sets prove that sensor-based location information can be applied to detect the compromised accounts in MSNs.

The Effects of Accounting Treatment and Financial Crisis on the Stock Option Plans of Italian Companies

Directory of Open Access Journals (Sweden)

Francesco Avallone

2014-03-01

Full Text Available Many studies state that favourable accounting treatment has been one of the main reasons behind employee stock options. In addition, stock options have recently been the target of growing criticism with a possible influence on incentive effectiveness and outrage costs. In such a perspective, the main purpose of the paper is to explore the impact of IFRS 2 and of the recent financial crisis on stock option compensation. Empirical evidence suggests that: (i IFRS 2 did not have a significant effect on stock option granting, (ii the issue of stock options is less likely to occur during the financial crisis.

Development of the System Dynamics Code using Homogeneous Equilibrium Model for S-CO{sub 2} Brayton cycle Transient Analyses

Energy Technology Data Exchange (ETDEWEB)

Bae, Seong Jun; Lee, Won Woong; Oh, Bongseong; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of)

2016-10-15

The features of the S-CO{sub 2} Brayton cycle come from a small compressing work by designing the compressor inlet close the critical point of CO{sub 2}. This means the system condition can be operating under two-phase or sub-critical phase during transient situations such as changes of cooling system performance, load variations, etc. Since there is no operating MW scale S-CO{sub 2} Brayton cycle system in the world yet, using an analytical code is the only way to predict the system behavior and develop operating strategies of the S-CO{sub 2} Brayton cycles. Therefore, the development of a credible system code is an important part for the practical S-CO{sub 2} system research. The current status of the developed system analysis code for S-CO{sub 2} Brayton cycle transient analyses in KAIST and verification results are presented in this paper. To avoid errors related with convergences of the code during the phase changing flow calculation in GAMMA+ code, the authors have developed a system analysis code using Homogeneous Equilibrium Model (HEM) for the S-CO{sub 2} Brayton cycle transient analysis. The backbone of the in-house code is the GAMMA+1.0 code, but treating the quality of fluid by tracking system enthalpy gradient every time step. Thus, the code adopts pressure and enthalpy as the independent scalar variables to track the system enthalpy for updating the quality of the system every time step. The heat conduction solving method, heat transfer correlation and frictional losses on the pipe are referred from the GAMMA+ code.

An Agent-Based Approach for Evaluating Basic Design Options of Management Accounting Systems

Directory of Open Access Journals (Sweden)

Friederike Wall

2013-12-01

Full Text Available This paper investigates the effectiveness of reducing errors in management accounting systems with respect to organizational performance. In particular, different basic design options of management accounting systems of how to improve the information base by measurements of actual values are analyzed in different organizational contexts. The paper applies an agent-based simulation based on the idea of NK fitness landscapes. The results provide broad, but no universal support for conventional wisdom that lower inaccuracies of accounting information lead to more effective adaptation processes. Furthermore, results indicate that the effectiveness of improving the management accounting system subtly interferes with the complexity of the interactions within the organization and the coordination mode applied

Compliance Report for MARS/FTL{sub L} to the License Review Guide (KINS/GE-N005)

Energy Technology Data Exchange (ETDEWEB)

Park, S. K.; Sim, B. S.; Lee, C. Y.; Ahn, S. H.; Chung, B. D

2007-12-15

The loss-of-coolant accidents of the HANARO fuel test loop have been predicted by MARS/FTL{sub L} computer code. The MARS/FTL{sub L} is a modified version of MARS 3.0 computer code. A user input option to use the multipliers of heat transfer correlations has been added to the MARS/FTL{sub L}. The multipliers were determined from the uncertainties of the heat transfer correlations so that the peak cladding temperatures of fuels are predicted conservatively in case of the loss-of-coolant accidents. The MARS/FTL{sub L} is essentially equivalent to the MARS except the user option on the multipliers of heat transfer correlations. The basic field equations, constitutive relations, and thermal hydraulic models of the MARS/FTL{sub L} are exactly the same as those of the MARS. It was ensured that the user option on the multipliers did work properly. All of the thermal hydraulic transient phenomena to be supposed in the loss-of-coolant accidents of the fuel test loop are also covered in assessment problems of the MARS. Therefore the MARS/FTL{sub L} can be used for the loss-of coolant accident analyses of the fuel test loop.

Logic of Accounting: The Case of Reporting Previous Options in Norwegian Activation Encounters

Science.gov (United States)

Solberg, Janne

2017-01-01

The article deals with the enactment of client resistance in Norwegian vocational rehabilitation encounters. More specific, a practice here called "reporting previous options" is analyzed by using the resources of ethnomethodological conversation analysis (CA) in five instances as doing some sort of accounting. In response to the…

CRACKEL: a computer code for CFR fuel management calculations

International Nuclear Information System (INIS)

Burstall, R.F.; Ball, M.A.; Thornton, D.E.J.

1975-12-01

The CRACKLE computer code is designed to perform rapid fuel management surveys of CFR systems. The code calculates overall features such as reactivity, power distributions and breeding gain, and also calculates for each sub-assembly plutonium content and power output. A number of alternative options are built into the code, in order to permit different fuel management strategies to be calculated, and to perform more detailed calculations when necessary. A brief description is given of the methods of calculation, and the input facilities of CRACKLE, with examples. (author)

Development and application of sub-channel analysis code based on SCWR core

International Nuclear Information System (INIS)

Fu Shengwei; Xu Zhihong; Yang Yanhua

2011-01-01

The sub-channel analysis code SABER was developed for thermal-hydraulic analysis of supercritical water-cooled reactor (SCWR) fuel assembly. The extended computational cell structure, a new boundary conditions, 3 dimensional heat conduction model and water properties package were implemented in SABER code, which could be used to simulate the thermal fuel assembly of SCWR. To evaluate the applicability of the code, a steady state calculation of the fuel assembly was performed. The results indicate good applicability of the SABER code to simulate the counter-current flow and the heat exchange between coolant and moderator channels. (authors)

Development of sub-channel/system coupled code and its application to a supercritical water-cooled test loop

International Nuclear Information System (INIS)

Liu, X.J.; Yang, T.; Cheng, X.

2014-01-01

To analyze the local thermal-hydraulic parameters in the supercritical water reactor-fuel qualification test (SCWR-FQT) fuel bundle with a flow blockage, a coupled sub-channel and system code system is developed in this paper. Both of the sub-channel code and system code are adapted to transient analysis of SCWR. Two codes are coupled by data transfer and data adaptation at the interface. In the coupled code, the whole system behavior including safety system characteristic is analyzed by system code ATHLET-SC, whereas the local thermal-hydraulic parameters are predicted by the sub-channel code COBRA-SC. Sensitivity analysis are carried out respectively in ATHLET-SC and COBRA-SC code, to identify the appropriate models for description of the flow blockage phenomenon in the test loop. Some measures to mitigate the accident consequence are also trialed to demonstrate their effectiveness. The results indicate that the new developed code has good feasibility to transient analysis of supercritical water-cooled test. And the peak cladding temperature caused by blockage in the fuel assembly can be reduced effectively by the safety measures of SCWR-FQT. (author)

ANDROS: A code for Assessment of Nuclide Doses and Risks with Option Selection

International Nuclear Information System (INIS)

Begovich, C.L.; Sjoreen, A.L.; Ohr, S.Y.; Chester, R.O.

1986-11-01

ANDROS (Assessment of Nuclide Doses and Risks with Option Selection) is a computer code written to compute doses and health effects from atmospheric releases of radionuclides. ANDROS has been designed as an integral part of the CRRIS (Computerized Radiological Risk Investigation System). ANDROS reads air concentrations and environmental concentrations of radionuclides to produce tables of specified doses and health effects to selected organs via selected pathways (e.g., ingestion or air immersion). The calculation may be done for an individual at a specific location or for the population of the whole assessment grid. The user may request tables of specific effects for every assessment grid location. Along with the radionuclide concentrations, the code requires radionuclide decay data, dose and risk factors, and location-specific data, all of which are available within the CRRIS. This document is a user manual for ANDROS and presents the methodology used in this code

Development and assessment of a sub-channel code applicable for trans-critical transient of SCWR

International Nuclear Information System (INIS)

Liu, X.J.; Yang, T.; Cheng, X.

2013-01-01

Highlights: • A new sub-channel code COBRA-SC for SCWR is developed. • Pseudo two-phase method is employed to realize trans-critical transient calculation. • Good suitability of COBRA-SC is demonstrated by preliminary assessment. • The calculation results of COBRA-SC agree well with ATHLET code. -- Abstract: In the last few years, extensive R and D activities have been launched covering various aspects of supercritical water-cooled reactor (SCWR), especially the thermal-hydraulic analysis. Sub-channel code plays an indispensable role to predict the detail thermal-hydraulic behavior of the SCWR fuel assembly. This paper develops a new version of sub-channel code COBRA-SC based on the previous COBRA-IV code. The supercritical water property and heat transfer/pressure drop correlations under supercritical pressure are implemented to this code. Moreover, in order to simulate the trans-critical transient (the pressure undergo a decrease from the supercritical pressure to the subcritical pressure), pseudo two-phase method is employed in COBRA-SC code. This work is completed by introduction of a virtual two-phase region near the pseudo-critical line. A smooth transition of void fraction can be realized. In addition, several heat transfer correlations right underneath the critical point are introduced into this code to capture the heat transfer behavior during the trans-critical transient. Some experimental data from simple geometry, e.g. the single tube, small rod bundle, is used to validate and evaluate this new developed COBRA-SC code. The predicted results show a good agreement with the experimental data, demonstrating good feasibility of this code for SCWR condition. A code to code comparison between COBRA-SC and ATHLET for a blowdown transient of a small fuel assembly is also presented and discussed in this paper

Sub-grouping of Plasmodium falciparum 3D7 var genes based on sequence analysis of coding and non-coding regions

DEFF Research Database (Denmark)

Lavstsen, Thomas; Salanti, Ali; Jensen, Anja T R

2003-01-01

and organization of the 3D7 PfEMP1 repertoire was investigated on the basis of the complete genome sequence. METHODS: Using two tree-building methods we analysed the coding and non-coding sequences of 3D7 var and rif genes as well as var genes of other parasite strains. RESULTS: var genes can be sub...

Harnessing the Tax Code to Promote College Affordability: Options for Reform

Science.gov (United States)

Valenti, Joe; Bergeron, David; Baylor, Elizabeth

2014-01-01

The United States tax code is full of provisions designed to encourage or reward specific behaviors, such as owning a home or saving for retirement. Tax benefits for higher education are no exception: Contributions to some college savings accounts grow tax-free, college tuition is often tax deductible, and some student-loan borrowers are able to…

A validation study of the BURNUP and associated options of the MONTE CARLO neutronics code MONK5W

International Nuclear Information System (INIS)

Howard, E.A.

1985-11-01

This is a report on the validation of the burnup option of the Monte Carlo Neutronics Code MONK5W, together with the associated facilities which allow for control rod movements and power changes. The validation uses reference solutions produced by the Deterministic Neutronics Code LWR-WIMS for a 2D model which represents a whole reactor calculation with control rod movements. (author)

Extension of BEPU methods to Sub-channel Thermal-Hydraulics and to Coupled Three-Dimensional Neutronics/Thermal-Hydraulics Codes

International Nuclear Information System (INIS)

Avramova, M.; Ivanov, K.; Arenas, C.

2013-01-01

The principles that support the risk-informed regulation are to be considered in an integrated decision-making process. Thus, any evaluation of licensing issues supported by a safety analysis would take into account both deterministic and probabilistic aspects of the problem. The deterministic aspects will be addressed using Best Estimate code calculations and considering the associated uncertainties i.e. Plus Uncertainty (BEPU) calculations. In recent years there has been an increasing demand from nuclear research, industry, safety and regulation for best estimate predictions to be provided with their confidence bounds. This applies also to the sub-channel thermal-hydraulic codes, which are used to evaluate local safety parameters. The paper discusses the extension of BEPU methods to the sub-channel thermal-hydraulic codes on the example of the Pennsylvania State University (PSU) version of COBRA-TF (CTF). The use of coupled codes supplemented with uncertainty analysis allows to avoid unnecessary penalties due to incoherent approximations in the traditional decoupled calculations, and to obtain more accurate evaluation of margins regarding licensing limit. This becomes important for licensing power upgrades, improved fuel assembly and control rod designs, higher burn-up and others issues related to operating LWRs as well as to the new Generation 3+ designs being licensed now (ESBWR, AP-1000, EPR-1600 and etc.). The paper presents the application of Generalized Perturbation Theory (GPT) to generate uncertainties associated with the few-group assembly homogenized neutron cross-section data used as input in coupled reactor core calculations. This is followed by a discussion of uncertainty propagation methodologies, being implemented by PSU in cooperation of Technical University of Catalonia (UPC) for reactor core calculations and for comprehensive multi-physics simulations. (authors)

Cape Verde Report on the Observance of Standards and Codes : Accounting and Auditing

OpenAIRE

World Bank

2012-01-01

This Report on the Observance of Standards and Codes (ROSC) provides an assessment of the strengths and weaknesses of the existing financial reporting infrastructure that underpins financial accounting and auditing practices in Cape Verde. The assessment focuses on six pillars of financial reporting infrastructure: statutory framework, professional education and training, accountancy profe...

The Moral Reasoning of Public Accountants in the Development of a Code of Ethics: the Case of Indonesia

Directory of Open Access Journals (Sweden)

A. S. L. Lindawati

2012-03-01

Full Text Available The objective of this study is to explore the user’s perceptions of the role of moral reasoning in influencing the implementation of codes of ethics as standards and guidance for professional audit practice by Indonesian public accountants. The study focuses on two important aspects of influence: (i the key factors influencing professional public accountants in implementing a code of ethics as a standard for audit practice, and (ii the key activities performed by public accountants as moral agents for establishing awareness of professional values. Two theoretical approaches/models are used as guides for exploring the influence of moral reasoning of public accountants: first, Kolhberg’s model of moral development (Kolhberg 1982 and, secondly, the American Institute of Certified Public Accountants (AICPA’s Code of Conduct, especially the five principles of the code of ethics (1992, 2004. The study employs a multiple case study model to analyse the data collected from interviewing 15 financial managers of different company categories (as users. The findings indicate that (i moral development is an important component in influencing the moral reasoning of the individual public accountants, (ii the degree of professionalism of public accountants is determined by the degree of the development of their moral reasoning, and (iii moral reasoning of individuals influences both Indonesian public accountants and company financial managers in building and improving the effectiveness of the implementation of codes of conduct. It is concluded that the role of moral reasoning is an important influence on achieving ethical awareness in public accountants and financial managers. The development of a full code of ethics and an effective compliance monitoring system is essential for Indonesia if it is to play a role in the emerging global economy.

Monte-Carlo Modelling and Verification of Photoluminescence of Gd{sub 2}O{sub 3}:Eu Scintillator by Using the GEANT4 Simulation Code

Energy Technology Data Exchange (ETDEWEB)

Cho, Gyu-Seok; Kim, Kum-Bae; Choi, Sang-Hyoun [Korea Institute of Radiological and Medical Science, Seoul (Korea, Republic of); Song, Yong-Keun [Inje University, Gimhae (Korea, Republic of); Lee, Soon-Sung [University of Science and Technology, Daejeon (Korea, Republic of)

2017-01-15

Recently, Monte Carlo methods have been used to optimize the design and modeling of radiation detectors. However, most Monte Carlo codes have a fixed and simple optical physics, and the effect of the signal readout devices is not considered because of the limitations of the geometry function. Therefore, the disadvantages of the codes prevent the modeling of the scintillator detector. The modeling of a comprehensive and extensive detector system has been reported to be feasible when the optical physics model of the GEomerty ANd Tracking 4 (GEANT 4) simulation code is used. In this study, we performed a Gd{sub 2}O{sub 3}:Eu scintillator modelling by using the GEANT4 simulation code and compared the results with the measurement data. To obtain the measurement data for the scintillator, we synthesized the Gd{sub 2}O{sub 3}:Eu scintillator by using solution combustion method and we evaluated the characteristics of the scintillator by using X-ray diffraction and photoluminescence. We imported the measured data into the GEANT4 code because GEANT4 cannot simulate a fluorescence phenomenon. The imported data were used as an energy distribution for optical photon generation based on the energy deposited in the scintillator. As a result of the simulation, a strong emission peak consistent with the measured data was observed at 611 nm, and the overall trends of the spectrum agreed with the measured data. This result is significant because the characteristics of the scintillator are equally implemented in the simulation, indicating a valuable improvement in the modeling of scintillator-based radiation detectors.

An African account of ecosystem service provision: Use, threats and policy options for sustainable livelihoods

CSIR Research Space (South Africa)

Egoh, Benis N

2012-12-01

Full Text Available -1 Ecosystem Services December 2012/ Vol. 2 An African account of ecosystem service provision: Use, threats and policy options for sustainable livelihoods Benis N. Egoh a, , , , Patrick J. O'Farrellb, Aymen Charefa, Leigh Josephine Gurney a...

Sub-Transport Layer Coding

DEFF Research Database (Denmark)

Hansen, Jonas; Krigslund, Jeppe; Roetter, Daniel Enrique Lucani

2014-01-01

Packet losses in wireless networks dramatically curbs the performance of TCP. This paper introduces a simple coding shim that aids IP-layer traffic in lossy environments while being transparent to transport layer protocols. The proposed coding approach enables erasure correction while being...... oblivious to the congestion control algorithms of the utilised transport layer protocol. Although our coding shim is indifferent towards the transport layer protocol, we focus on the performance of TCP when ran on top of our proposed coding mechanism due to its widespread use. The coding shim provides gains...

Sub-quadratic decoding of one-point hermitian codes

DEFF Research Database (Denmark)

Nielsen, Johan Sebastian Rosenkilde; Beelen, Peter

2015-01-01

We present the first two sub-quadratic complexity decoding algorithms for one-point Hermitian codes. The first is based on a fast realization of the Guruswami-Sudan algorithm using state-of-the-art algorithms from computer algebra for polynomial-ring matrix minimization. The second is a power...... decoding algorithm: an extension of classical key equation decoding which gives a probabilistic decoding algorithm up to the Sudan radius. We show how the resulting key equations can be solved by the matrix minimization algorithms from computer algebra, yielding similar asymptotic complexities....

Validation of Printed Circuit Heat Exchanger Design Code KAIST{sub H}XD

Energy Technology Data Exchange (ETDEWEB)

Baik, Seungjoon; Kim, Seong Gu; Lee, Jekyoung; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of)

2015-05-15

Supercritical carbon dioxide (S-CO{sub 2}) Brayton cycle has been suggested for the SFR due to the relatively mild sodium-CO{sub 2} interaction. The S-CO{sub 2} power conversion cycle can achieve not only high safety but also high efficiency with SFR core thermal condition. However, due to the dramatic property change near the critical point, the inlet pressure and temperature conditions of compressor can have significant effect on the overall cycle efficiency. To maintain the inlet condition of compressor, a sensitive precooler control system is required for stable operation. Therefore understanding the precooler performance is essential for the S-CO{sub 2} power conversion system. According to experimental result, designed PCHE showed high effectiveness in various operating regions. Comparing the experimental and the design data, heat transfer performance estimation showed less than 6% error. On the other hand, the pressure drop estimation showed large gap. The water side pressure drop showed 50-70% under estimation. Because the form losses were not included in the design code, water side pressure drop estimation result seems reliable. However, the CO{sub 2} side showed more than 70% over estimation in the pressure drop from the code. The authors suspect that the differences may have occurred by the channel corner shape. The real channel has round corners and smooth edge, but the correlation is based on the sharp edged zig-zag channel. Further studies are required to understand and interpret the results correctly in the future.

Contrasting motivational orientation and evaluative coding accounts: On the need to differentiate the effectors of approach/avoidance responses

Directory of Open Access Journals (Sweden)

Julia eKozlik

2015-05-01

Full Text Available Several emotion theorists suggest that valenced stimuli automatically trigger motivational orientations and thereby facilitate corresponding behavior. Positive stimuli were thought to activate approach motivational circuits which in turn primed approach-related behavioral tendencies whereas negative stimuli were supposed to activate avoidance motivational circuits so that avoidance-related behavioral tendencies were primed (motivational orientation account. However, recent research suggests that typically observed affective stimulus–response compatibility phenomena might be entirely explained in terms of theories accounting for mechanisms of general action control instead of assuming motivational orientations to mediate the effects (evaluative coding account. In what follows, we explore to what extent this notion is applicable. We present literature suggesting that evaluative coding mechanisms indeed influence a wide variety of affective stimulus–response compatibility phenomena. However, the evaluative coding account does not seem to be sufficient to explain affective S–R compatibility effects. Instead, several studies provide clear evidence in favor of the motivational orientation account that seems to operate independently of evaluative coding mechanisms. Implications for theoretical developments and future research designs are discussed.

Contrasting motivational orientation and evaluative coding accounts: on the need to differentiate the effectors of approach/avoidance responses.

Science.gov (United States)

Kozlik, Julia; Neumann, Roland; Lozo, Ljubica

2015-01-01

Several emotion theorists suggest that valenced stimuli automatically trigger motivational orientations and thereby facilitate corresponding behavior. Positive stimuli were thought to activate approach motivational circuits which in turn primed approach-related behavioral tendencies whereas negative stimuli were supposed to activate avoidance motivational circuits so that avoidance-related behavioral tendencies were primed (motivational orientation account). However, recent research suggests that typically observed affective stimulus-response compatibility phenomena might be entirely explained in terms of theories accounting for mechanisms of general action control instead of assuming motivational orientations to mediate the effects (evaluative coding account). In what follows, we explore to what extent this notion is applicable. We present literature suggesting that evaluative coding mechanisms indeed influence a wide variety of affective stimulus-response compatibility phenomena. However, the evaluative coding account does not seem to be sufficient to explain affective S-R compatibility effects. Instead, several studies provide clear evidence in favor of the motivational orientation account that seems to operate independently of evaluative coding mechanisms. Implications for theoretical developments and future research designs are discussed.

Roadmap for the Future of Commercial Energy Codes

Energy Technology Data Exchange (ETDEWEB)

Rosenberg, Michael I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Hart, Philip R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Zhang, Jian [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-01-01

Building energy codes have significantly increased building efficiency over the last 38 years, since the first national energy code was published in 1975. The most commonly used path in energy codes, the prescriptive path, appears to be reaching a point of diminishing returns. The current focus on prescriptive codes has limitations including significant variation in actual energy performance depending on which prescriptive options are chosen, a lack of flexibility for designers and developers, the inability to handle optimization that is specific to building type and use, the inability to account for project-specific energy costs, and the lack of follow-through or accountability after a certificate of occupancy is granted. It is likely that an approach that considers the building as an integrated system will be necessary to achieve the next real gains in building efficiency. This report provides a high-level review of different formats for commercial building energy codes, including prescriptive, prescriptive packages, capacity constrained, outcome based, and predictive performance approaches. This report also explores a next generation commercial energy code approach that places a greater emphasis on performance-based criteria.

ITER Dynamic Tritium Inventory Modeling Code

International Nuclear Information System (INIS)

Cristescu, Ioana-R.; Doerr, L.; Busigin, A.; Murdoch, D.

2005-01-01

A tool for tritium inventory evaluation within each sub-system of the Fuel Cycle of ITER is vital, with respect to both the process of licensing ITER and also for operation. It is very likely that measurements of total tritium inventories may not be possible for all sub-systems, however tritium accounting may be achieved by modeling its hold-up within each sub-system and by validating these models in real-time against the monitored flows and tritium streams between the systems. To get reliable results, an accurate dynamic modeling of the tritium content in each sub-system is necessary. In order to optimize the configuration and operation of the ITER fuel cycle, a dynamic fuel cycle model was developed progressively in the decade up to 2000-2001. As the design for some sub-systems from the fuel cycle (i.e. Vacuum pumping, Neutral Beam Injectors (NBI)) have substantially progressed meanwhile, a new code developed under a different platform to incorporate these modifications has been developed. The new code is taking over the models and algorithms for some subsystems, such as Isotope Separation System (ISS); where simplified models have been previously considered, more detailed have been introduced, as for the Water Detritiation System (WDS). To reflect all these changes, the new code developed inside EU participating team was nominated TRIMO (Tritium Inventory Modeling), to emphasize the use of the code on assessing the tritium inventory within ITER

Strengthening accountability for improved maternal and newborn health: A mapping of studies in Sub-Saharan Africa.

Science.gov (United States)

Martin Hilber, Adriane; Blake, Carolyn; Bohle, Leah F; Bandali, Sarah; Agbon, Esther; Hulton, Louise

2016-12-01

To describe the types of maternal and newborn health program accountability mechanisms implemented and evaluated in recent years in Sub-Saharan Africa, how these have been implemented, their effectiveness, and future prospects to improve governance and MNH outcomes. A structured review selected 38 peer-reviewed papers between 2006 and 2016 in Sub-Saharan Africa to include in the analysis. Performance accountability in MNH through maternal and perinatal death surveillance was the most common accountability mechanism used. Political and democratic accountability through advocacy, human rights, and global tracking of progress on indicators achieved greatest results when multiple stakeholders were involved. Financial accountability can be effective but depend on external support. Overall, this review shows that accountability is more effective when clear expectations are backed by social and political advocacy and multistakeholder engagement, and supported by incentives for positive action. There are few accountability mechanisms in MNH in Sub-Saharan Africa between decision-makers and those affected by those decisions with both the power and the will to enforce answerability. Increasing accountability depends not only on how mechanisms are enforced but also, on how providers and managers understand accountability. Copyright © 2016 International Federation of Gynecology and Obstetrics. Published by Elsevier Ireland Ltd. All rights reserved.

Bad-good constraints on a polarity correspondence account for the spatial-numerical association of response codes (SNARC) and markedness association of response codes (MARC) effects.

Science.gov (United States)

Leth-Steensen, Craig; Citta, Richie

2016-01-01

Performance in numerical classification tasks involving either parity or magnitude judgements is quicker when small numbers are mapped onto a left-sided response and large numbers onto a right-sided response than for the opposite mapping (i.e., the spatial-numerical association of response codes or SNARC effect). Recent research by Gevers et al. [Gevers, W., Santens, S., Dhooge, E., Chen, Q., Van den Bossche, L., Fias, W., & Verguts, T. (2010). Verbal-spatial and visuospatial coding of number-space interactions. Journal of Experimental Psychology: General, 139, 180-190] suggests that this effect also arises for vocal "left" and "right" responding, indicating that verbal-spatial coding has a role to play in determining it. Another presumably verbal-based, spatial-numerical mapping phenomenon is the linguistic markedness association of response codes (MARC) effect whereby responding in parity tasks is quicker when odd numbers are mapped onto left-sided responses and even numbers onto right-sided responses. A recent account of both the SNARC and MARC effects is based on the polarity correspondence principle [Proctor, R. W., & Cho, Y. S. (2006). Polarity correspondence: A general principle for performance of speeded binary classification tasks. Psychological Bulletin, 132, 416-442]. This account assumes that stimulus and response alternatives are coded along any number of dimensions in terms of - and + polarities with quicker responding when the polarity codes for the stimulus and the response correspond. In the present study, even-odd parity judgements were made using either "left" and "right" or "bad" and "good" vocal responses. Results indicated that a SNARC effect was indeed present for the former type of vocal responding, providing further evidence for the sufficiency of the verbal-spatial coding account for this effect. However, the decided lack of an analogous SNARC-like effect in the results for the latter type of vocal responding provides an important

Simulation of severe accident using March-3 computer code

International Nuclear Information System (INIS)

Fernandes, A.; Nakata, H.

1991-01-01

The severe accident sensitivity analysis utilizing the March-3 approximate modelization options has been performed. The reference results against which the present results have been compared were obtained from the best published results for the most representative accident sequences: TMLU, S sub(2)DC sub(r) and S sub(2)DCF sub(r) for the Zion-1 reactor. The results of the present sensitivity analysis revealed the presence of very crude modelizations, in the March-3 program, to represent the critical phenomenologies involved in the severe accident sequences considered, even though large uncertainties must still be taken into account due primarily to the scarcity of the integral benchmark data. (author)

Combining Space Geodesy, Seismology, and Geochemistry for Monitoring Verification and Accounting of CO<sub>2sub> in Sequestration Sites

Energy Technology Data Exchange (ETDEWEB)

Swart, Peter K. [Univ. of Miami, Key Biscayne, FL (United States); Dixon, Tim [Univ. of South Florida, Tampa, FL (United States)

2014-09-30

A series of surface geophysical and geochemical techniques are tested in order to demonstrate and validate low cost approaches for Monitoring, Verification and Accounting (MVA) of the integrity of deep reservoirs for CO<sub>2sub> storage. These techniques are (i) surface deformation by GPS; ii) surface deformation by InSAR; iii) passive source seismology via broad band seismometers; and iv) soil gas monitoring with a cavity ring down spectrometer for measurement of CO<sub>2sub> concentration and carbon isotope ratio. The techniques were tested at an active EOR (Enhanced Oil Recovery) site in Texas. Each approach has demonstrated utility. Assuming Carbon Capture, Utilization and Storage (CCUS) activities become operational in the future, these techniques can be used to augment more expensive down-hole techniques.

STATIC{sub T}EMP: a useful computer code for calculating static formation temperatures in geothermal wells

Energy Technology Data Exchange (ETDEWEB)

Santoyo, E. [Universidad Nacional Autonoma de Mexico, Centro de Investigacion en Energia, Temixco (Mexico); Garcia, A.; Santoyo, S. [Unidad Geotermia, Inst. de Investigaciones Electricas, Temixco (Mexico); Espinosa, G. [Universidad Autonoma Metropolitana, Co. Vicentina (Mexico); Hernandez, I. [ITESM, Centro de Sistemas de Manufactura, Monterrey (Mexico)

2000-07-01

The development and application of the computer code STATIC{sub T}EMP, a useful tool for calculating static formation temperatures from actual bottomhole temperature data logged in geothermal wells is described. STATIC{sub T}EMP is based on five analytical methods which are the most frequently used in the geothermal industry. Conductive and convective heat flow models (radial, spherical/radial and cylindrical/radial) were selected. The computer code is a useful tool that can be reliably used in situ to determine static formation temperatures before or during the completion stages of geothermal wells (drilling and cementing). Shut-in time and bottomhole temperature measurements logged during well completion activities are required as input data. Output results can include up to seven computations of the static formation temperature by each wellbore temperature data set analysed. STATIC{sub T}EMP was written in Fortran-77 Microsoft language for MS-DOS environment using structured programming techniques. It runs on most IBM compatible personal computers. The source code and its computational architecture as well as the input and output files are described in detail. Validation and application examples on the use of this computer code with wellbore temperature data (obtained from specialised literature) and with actual bottomhole temperature data (taken from completion operations of some geothermal wells) are also presented. (Author)

Optically transparent multiple access networks employing incoherent spectral codes

NARCIS (Netherlands)

Huiszoon, B.

2008-01-01

This Ph.D. thesis is divided into 7 chapters to provide the reader an overview of the main results achieved in di®erent sub-topics of the study towards optically transparent multiple access networks employing incoherent spectral codes taking into account wireless transmission aspects. The work

Development and implementation of a set of numerical quadratures SQ{sub N} and EQ{sub N} type in the transport code AZTRAN; Desarrollo e implementacion de un conjunto de cuadraturas numericas de tipo SQ{sub N} y EQ{sub N} en el codigo de transporte AZTRAN

Energy Technology Data Exchange (ETDEWEB)

Chepe P, M. [Universidad Autonoma Metropolitana, Unidad Iztapalapa, San Rafael Atlixco 186, Col. Vicentina, 09340 Ciudad de Mexico (Mexico); Xolocostli M, J. V.; Gomez T, A. M. [ININ, Carretera Mexico-Toluca s/n, 52750 Ocoyoacac, Estado de Mexico (Mexico); Del Valle G, E., E-mail: liaison.web@gmail.com [IPN, Escuela Superior de Fisica y Matematicas, Av. IPN s/n, Col. Lindavista, 07738 Ciudad de Mexico (Mexico)

2015-09-15

The deterministic transport codes for analysis of nuclear reactors have been used for several years already, these codes have evolved in terms of the methodology used and the degree of accuracy, because at the present time has more computer power. In this paper, the transport code used considers the classical technique of multi-group for discretization energy, for space discretization uses the nodal methods, while for the angular discretization the discrete ordinates method is used; so that presents the development and implementation of a set of numerical quadratures of SQ{sub N} type symmetrical with the same weight for each angular direction and these are compared with the quadratures of EQ{sub N} type. The two sets of numerical quadratures were implemented in the program AZTRAN to a problem with isotropic medium in XYZ geometry, in steady state using the nodal method RTN-0 (Raviart-Thomas-Nedelec). The analyzed results correspond to the effective multiplication factor k{sub eff} and neutron angular flux with approximations from S{sub 4} to S{sub 16}. (Author)

Benchmarking Reactor Systems Studies by Comparison of EU and Japanese System Code Results for Different DEMO Concepts

Energy Technology Data Exchange (ETDEWEB)

Kemp, R.; Ward, D.J., E-mail: richard.kemp@ccfe.ac.uk [EURATOM/CCFE Association, Culham Centre for Fusion Energy, Abingdon (United Kingdom); Nakamura, M.; Tobita, K. [Japan Atomic Energy Agency, Rokkasho (Japan); Federici, G. [EFDA Garching, Max Plank Institut fur Plasmaphysik, Garching (Germany)

2012-09-15

Full text: Recent systems studies work within the Broader Approach framework has focussed on benchmarking the EU systems code PROCESS against the Japanese code TPC for conceptual DEMO designs. This paper describes benchmarking work for a conservative, pulsed DEMO and an advanced, steady-state, high-bootstrap fraction DEMO. The resulting former machine is an R{sub 0} = 10 m, a = 2.5 m, {beta}{sub N} < 2.0 device with no enhancement in energy confinement over IPB98. The latter machine is smaller (R{sub 0} = 8 m, a = 2.7 m), with {beta}{sub N} = 3.0, enhanced confinement, and high bootstrap fraction f{sub BS} = 0.8. These options were chosen to test the codes across a wide range of parameter space. While generally in good agreement, some of the code outputs differ. In particular, differences have been identified in the impurity radiation models and flux swing calculations. The global effects of these differences are described and approaches to identifying the best models, including future experiments, are discussed. Results of varying some of the assumptions underlying the modelling are also presented, demonstrating the sensitivity of the solutions to technological limitations and providing guidance for where further research could be focussed. (author)

A reflexive exploration of two qualitative data coding techniques

Directory of Open Access Journals (Sweden)

Erik Blair

2016-01-01

Full Text Available In an attempt to help find meaning within qualitative data, researchers commonly start by coding their data. There are a number of coding systems available to researchers and this reflexive account explores my reflections on the use of two such techniques. As part of a larger investigation, two pilot studies were undertaken as a means to examine the relative merits of open coding and template coding for examining transcripts. This article does not describe the research project per se but attempts to step back and offer a reflexive account of the development of data coding tools. Here I reflect upon and evaluate the two data coding techniques that were piloted, and discuss how using appropriate aspects of both led to the development of my final data coding approach. My exploration found there was no clear-cut ‘best’ option but that the data coding techniques needed to be reflexively-aligned to meet the specific needs of my project. This reflection suggests that, when coding qualitative data, researchers should be methodologically thoughtful when they attempt to apply any data coding technique; that they do not assume pre-established tools are aligned to their particular paradigm; and that they consider combining and refining established techniques as a means to define their own specific codes. DOI: 10.2458/azu_jmmss.v6i1.18772DOI: 10.2458/azu_jmmss.v6i1.18772

TOGA: A TOUGH code for modeling three-phase, multi-component, and non-isothermal processes involved in CO<sub>2sub>-based Enhanced Oil Recovery

Energy Technology Data Exchange (ETDEWEB)

Pan, Lehua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of California, Berkeley, CA (United States); Oldenburg, Curtis M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Univ. of California, Berkeley, CA (United States)

2016-10-10

CMG. The code has also been validated against a CO<sub>2sub>-EOR experimental core flood involving flow of three phases and 12 components. Results of simulations of a hypothetical 3D CO<sub>2sub>-EOR problem involving three phases and multiple components are presented to demonstrate the field-scale capabilities of the new code. This user guide provides instructions for use and sample problems for verification and demonstration.

Verification of the three-dimensional tetrahedral grid S{sub N} code THOR

Energy Technology Data Exchange (ETDEWEB)

Schunert, S. [Department of Nuclear Engineering, North Carolina State University (United States); Ferrer, R. [Studsvik Scandpower, Idaho Falls, ID (United States); Azmy, Y. [Department of Nuclear Engineering, North Carolina State University (United States)

2013-07-01

In this work current capabilities implemented in the novel, arbitrary-order, tetrahedral-grid short characteristics S{sub N} radiation transport code THOR are verified based on four benchmark problems: (1) A one-group Method of Manufactured Solution (MMS) problem on a cuboidal domain, (2) an infinite medium eigenvalue problem with up-scattering, (3) a homogeneous torus and (4) a bare cube eigenvalue problem with anisotropic scattering up to order three. The first benchmark problem exercises the various spatial discretization options available in THOR: The short characteristics method in conjunction with polynomial expansions of the source and face fluxes either using the complete or Lagrange family of arbitrary orders. Using the numerical solution's order of convergence test in the framework of a mesh refinement study, correct implementation of a selection of spatial expansion orders is demonstrated for two meshes with tetrahedral aspect ratios close to unity and 50. The second benchmark problem exercises the implementation of angular fluxes on reflective boundary faces that are implicit within a mesh sweep, and up-scattering. The third benchmark problem comprises cyclic dependencies within the mesh sweep thus exercising the algorithm devised for 'breaking' the cyclic dependencies. Finally, the fourth benchmark problem, a simple bare cube, is used to test correct implementation of the anisotropic scattering capability. For all test problems THOR obtains solutions that converge to the reference/exact solution with the expected rate thereby contributing to our confidence in the correctness of its tested features in the present implementation. (authors)

Assessment of technologies for CO{sub 2} capture and storage. Final report; Verfahren zur CO{sub 2}-Abscheidung und -Speicherung. Abschlussbericht

Energy Technology Data Exchange (ETDEWEB)

Radgen, Peter; Cremer, Clemens; Warkentin, Sebastian [Fraunhofer-Inst. fuer Systemtechnik und Innovationsforschung, Karlsruhe (Germany); Gerling, Peter; May, Franz; Knopf, Stephan [Bundesanstalt fuer Geowissenschaften und Rohstoffe, Hannover (Germany)

2006-08-15

The aim of this study was to summarize the actual status for carbon capture, transport and storage for CO{sub 2} emissions from power stations. Special interest was given to the implications from the introduction of carbon capture and storage in power stations on the efficiency, emissions and cost for electricity generation. In the beginning a detailed analyses of the national, European and international activities in this field have been conducted. The analysis focussed on the identification of main actors and the different co-operation of actors. To do so, the available literature has been studied and analysed with a bibliometric approach, which has taken also presentations at national and international conferences into account. In a second step a technical analysis has been undertaken for the three main routes for carbon capture (pre-combustion capture; post-combustion capture, oxy-fuel combustion) with a special emphasis on the impact to the Environment. Truck, ship and pipeline transport have been analysed as means for transporting the CO{sub 2} from the power station to the storage site. In addition the different storage options for a secure long term storage of the captured CO{sub 2} are studied in the report. Special attention was given to the storage options in gasfields and saline aquifers which will be the most promising options in Germany. The report gives an actual overview on the status of carbon capture and storage in the world. It therefore supports the decision making process when introducing this new technology, taking into account the environmental effects. (orig.)

A thermal hydraulic analysis in PWR reactors with UO{sub 2} or (U-Th)O{sub 2} fuel rods employing a simplified code

Energy Technology Data Exchange (ETDEWEB)

Santos, Thiago A. dos; Maiorino, José R., E-mail: thiago.santos@ufabc.edu.br, E-mail: joserubens.maiorino@ufabc.edu.br [Universidade Federal do ABC (UFABC), Santo André, SP (Brazil); Stefanni, Giovanni L. de, E-mail: giovanni.stefanni@ipen.br [Instituto de Pesquisas Energéticas e Nucleares (IPEN/CNEN-SP), São Paulo, SP (Brazil)

2017-07-01

In order to project a nuclear reactor, the neutronic calculus must be validated, so that its thermal limits and safety parameters are respected. Considering this issue, this research aims to evaluate the APTh-100 reactor thermal limits. This PWR is a project developed in Universidade Federal do ABC (UFABC) using fuel composed of Uranium and Thorium oxide mixed (U,Th)O{sub 2}. For this purpose, a simplified, although conservative, code was developed in a MATLAB environment named STC-MOX-Th 'Simplified Thermal-hydraulics Code-Mixed Oxide Thorium'. This code provides axial and radial temperature distribution, as well as DNBR distribution over the hottest channel of the reactor core. Moreover, it brings other hydraulic quantities, such as pressure drop over the fuel rod, considering any fuel proportion of (U,Th)O{sub 2}.The software uses basic laws of conservation of mass, momentum and energy, it also calculates the thermal conduction equation, considering the thermal conductive coefficient as a temperature function. In order to solve this equation, the finite elements method was used. Furthermore, the proportion of 36% of UO{sub 2} was used to evaluate the temperature over the fuel rod and DNBR minimum in three burn conditions: beginning, middle and ending. The program has proven to be efficient in every condition and the results evidenced that the APTh-1000 reactor, in an initial analysis, has its thermal limits within the recommended security parameters. (author)

Challenges to code status discussions for pediatric patients.

Directory of Open Access Journals (Sweden)

Katherine E Kruse

Full Text Available In the context of serious or life-limiting illness, pediatric patients and their families are faced with difficult decisions surrounding appropriate resuscitation efforts in the event of a cardiopulmonary arrest. Code status orders are one way to inform end-of-life medical decision making. The objectives of this study are to evaluate the extent to which pediatric providers have knowledge of code status options and explore the association of provider role with (1 knowledge of code status options, (2 perception of timing of code status discussions, (3 perception of family receptivity to code status discussions, and (4 comfort carrying out code status discussions.Nurses, trainees (residents and fellows, and attending physicians from pediatric units where code status discussions typically occur completed a short survey questionnaire regarding their knowledge of code status options and perceptions surrounding code status discussions.Single center, quaternary care children's hospital.203 nurses, 31 trainees, and 29 attending physicians in 4 high-acuity pediatric units responded to the survey (N = 263, 90% response rate. Based on an objective knowledge measure, providers demonstrate poor understanding of available code status options, with only 22% of providers able to enumerate more than two of four available code status options. In contrast, provider groups self-report high levels of familiarity with available code status options, with attending physicians reporting significantly higher levels than nurses and trainees (p = 0.0125. Nurses and attending physicians show significantly different perception of code status discussion timing, with majority of nurses (63.4% perceiving discussions as occurring "too late" or "much too late" and majority of attending physicians (55.6% perceiving the timing as "about right" (p<0.0001. Attending physicians report significantly higher comfort having code status discussions with families than do nurses or trainees

Optional accounting criteria under ifrss and corporate characteristics: evidence from spain

Directory of Open Access Journals (Sweden)

JUANA ALEDO MARTÍNEZ

2011-06-01

Full Text Available The adoption of the IFRSs by EU member States in 2005 represents one of the most relevant events that have taken place to achieve the convergence of international accounting standards. In this article, we examine the annual reports of the groups listed on the Spanish Continuous Market that adopted IFRSs in 2005 in order to determine the optional accounting criteria they apply under IFRSs and, secondly, identify corporate characteristics affecting these choices. Because there are important differences across countries as a consequence of different institutional frameworks, the mandatory IFRSs adoption is an opportunity to analyze its economic effects. The main finding of this study is that Spanish groups apply the most conservative criteria to limit the number of changes they introduce related to the previous local GAAP, particularly in regards to presentation and measurement options. Additionally, we find that corporate characteristics such as industry, return on equity, size and type of audit firm (Big Four vs. non-Big Four influence the choice of accounting methods used to prepare their financial statements. The analysis of these results provides a basis for discussion between responsible international standard setters (such as IASB and FASB and regulators to work towards the convergence’s goals.RESUMENLa adopción de las NIIFs por los Estados Miembro de la UE en 2005 representa uno de los acontecimientos en materia armonizadora más importantes de los últimos años. En este artículo examinamos los estados financieros de las compañías cotizadas españolas que integran el Mercado Continuo, con la finalidad de determinar los criterios contables opcionales adoptados de conformidad con las NIIFs, e identificamos las características corporativas de estas compañías que influyen en dicha elección. Los resultados alcanzados revelan que los grupos españoles adoptan los criterios más conservadores con la finalidad de limitar el número de

Location-coding account versus affordance-activation account in handle-to-hand correspondence effects: Evidence of Simon-like effects based on the coding of action direction.

Science.gov (United States)

Pellicano, Antonello; Koch, Iring; Binkofski, Ferdinand

2017-09-01

An increasing number of studies have shown a close link between perception and action, which is supposed to be responsible for the automatic activation of actions compatible with objects' properties, such as the orientation of their graspable parts. It has been observed that left and right hand responses to objects (e.g., cups) are faster and more accurate if the handle orientation corresponds to the response location than when it does not. Two alternative explanations have been proposed for this handle-to-hand correspondence effect : location coding and affordance activation. The aim of the present study was to provide disambiguating evidence on the origin of this effect by employing object sets for which the visually salient portion was separated from, and opposite to the graspable 1, and vice versa. Seven experiments were conducted employing both single objects and object pairs as visual stimuli to enhance the contextual information about objects' graspability and usability. Notwithstanding these manipulations intended to favor affordance activation, results fully supported the location-coding account displaying significant Simon-like effects that involved the orientation of the visually salient portion of the object stimulus and the location of the response. Crucially, we provided evidence of Simon-like effects based on higher-level cognitive, iconic representations of action directions rather than based on lower-level spatial coding of the pure position of protruding portions of the visual stimuli. (PsycINFO Database Record (c) 2017 APA, all rights reserved).

BREESE-II: auxiliary routines for implementing the albedo option in the MORSE Monte Carlo code

International Nuclear Information System (INIS)

Cain, V.R.; Emmett, M.B.

1979-07-01

The routines in the BREESE package implement the albedo option in the MORSE Monte Carlo Code by providing (1) replacements for the default routines ALBIN and ALBDO in the MORSE Code, (2) an estimating routine ALBDOE compatible with the SAMBO package in MORSE, and (3) a separate program that writes a tape of albedo data in the proper format for ALBIN. These extensions of the package initially reported in 1974 were performed jointly by ORNL, Bechtel Power Corporation, and Science Applications, Inc. The first version of BREESE had a fixed number of outgoing polar angles and the number of outgoing azimuthal angles was a function of the value of the outgoing polar angle only. An examination of differential albedo data led to this modified version which allows the number of outgoing polar angles to be dependent upon the value of the incoming polar angle and the number of outgoing azimuthal angles to be a function of the value of both incoming and outgoing polar angles

Accounting for sub-resolution pores in models of water and solute transport in soils based on computed tomography images: Are we there yet?

Science.gov (United States)

Baveye, Philippe C.; Pot, Valérie; Garnier, Patricia

2017-12-01

In the last decade, X-ray computed tomography (CT) has become widely used to characterize the geometry and topology of the pore space of soils and natural porous media. Regardless of the resolution of CT images, a fundamental problem associated with their use, for example as a starting point in simulation efforts, is that sub-resolution pores are not detected. Over the last few years, a particular type of modeling method, known as ;Grey; or ;Partial Bounce Back; Lattice-Boltzmann (LB), has been adopted by increasing numbers of researchers to try to account for sub-resolution pores in the modeling of water and solute transport in natural porous media. In this short paper, we assess the extent to which Grey LB methods indeed offer a workable solution to the problem at hand. We conclude that, in spite of significant computational advances, a major experimental hurdle related to the evaluation of the penetrability of sub-resolution pores, is blocking the way ahead. This hurdle will need to be cleared before Grey LB can become a credible option in the microscale modeling of soils and sediments. A necessarily interdisciplinary effort, involving both modelers and experimentalists, is needed to clear the path forward.

Assessment of pin-by-pin fission rate distribution within MOX/UO{sub 2} fuel assembly using MCNPX code

Energy Technology Data Exchange (ETDEWEB)

Louis, Heba Kareem; Amin, Esmat [Nuclear and Radiological Regulation Authority (NRRA), Cairo (Egypt). Safety Engineering Dept.

2016-03-15

The aim of the present paper is to assess the calculations of pin-by-pin group integrated fission rates within MOX/UO{sub 2} Fuel assemblies using the Monte Carlo code MCNP2.7c with two sets of the available latest nuclear data libraries used for calculating MOX-fueled systems. The data that are used in this paper are based on the benchmark by the NEA Nuclear Science Committee (NSC). The k{sub ∞} and absorption/fission reaction rates per isotope, k{sub eff} and pin-by-pin group integrated fission rates on 1/8 fraction of the geometry are determined. To assess the overall pin-by-pin fission rate distribution, the collective per cent error measures were investigated. The results of AVG, MRE and RMS error measures were less than 1 % error. The present results are compared with other participants using other Monte Carlo codes and with CEA results that were taken in the benchmark as reference. The results with ENDF/B-VI.6 are close to the results received by MVP (JENDL3.2) and SCALE 4.2 (JEF2.2). The results with ENDF/BVII.1 give higher values of k{sub ∞} reflecting the changes in the newer evaluations. In almost all results presented here, the MCNP calculated results with ENDF/B VII.1 should be considered more than those obtained by using other Monte Carlo codes and nuclear data libraries. The present calculations may be consider a reference for evaluating the numerical schemes in production code systems, as well as the global performance including cross-section data reduction methods as the calculations used continuous energy and no geometrical approximations.

Household Rates of Return to Education in Rural Bangladesh: Accounting for Direct Costs, Child Labour, and Option Value

Science.gov (United States)

Shafiq, M. Najeeb

2007-01-01

This study estimates the returns to boys' education for rural Bangladeshi households by accounting for some conventionally neglected items: direct costs of education, foregone child labour earnings, and option value. The estimated returns are 13.5% for primary education, 7.8% for junior-secondary education, 12.9% for higher-secondary education,…

Improving social accountability processes in the health sector in sub-Saharan Africa: a systematic review.

Science.gov (United States)

Danhoundo, Georges; Nasiri, Khalidha; Wiktorowicz, Mary E

2018-04-13

Social accountability is a participatory process in which citizens are engaged to hold politicians, policy makers and public officials accountable for the services that they provide. In the Fifteenth Ordinary Session of the Assembly of the African Union, African leaders recognized the need for strong, decentralized health programs with linkages to civil society and private sector entities, full community participation in program design and implementation, and adaptive approaches to local political, socio-cultural and administrative environments. Despite the increasing use of social accountability, there is limited evidence on how it has been used in the health sector. The objective of this systematic review was to identify the conditions that facilitate effective social accountability in sub-Saharan Africa. Electronic databases (MEDLINE, PsycINFO, Sociological Abstracts, Social Sciences Abstracts) were searched for relevant articles published between 2000 and August 2017. Studies were eligible for inclusion if they were peer-reviewed English language publications describing a social accountability intervention in sub-Saharan Africa. Qualitative and quantitative study designs were eligible. Fourteen relevant studies were included in the review. The findings indicate that effective social accountability interventions involve leveraging partnerships and building coalitions; being context-appropriate; integrating data and information collection and analysis; clearly defined roles, standards, and responsibilities of leaders; and meaningful citizen engagement. Health system barriers, corruption, fear of reprisal, and limited funding appear to be major challenges to effective social accountability interventions. Although global accountability standards play an important guiding role, the successful implementation of global health initiatives depend on national contexts.

An improved version of the MICROX-2 code

Energy Technology Data Exchange (ETDEWEB)

Mathews, D. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

1997-11-01

The MICROX-2 code prepares broad group neutron cross sections for use in diffusion- and/or transport-theory codes from an input library of fine group and pointwise cross sections. The neutron weighting spectrum is obtained by solving the B{sub 1} neutron balance equations at about 10000 energies in a one-dimensional (planar, spherical or cylindrical), two-region unit cell. The regions are coupled by collision probabilities based upon spatially flat neutron emission. Energy dependent Dancoff factors and bucklings correct the one-dimensional calculations for multi-dimensional lattice effects. A critical buckling search option is also included. The inner region may include two different types of fuel particles (grains). This report describes the present PSI FORTRAN 90 version of the MICROX-2 code which operates on CRAY computers and IBM PC`s. The equations which are solved in the various energy ranges are given along with descriptions of various changes that have been made in the present PSI version of the code. A completely re-written description of the user input is also included. (author) 7 figs., 4 tabs., 59 refs.

ZAKI a windows-based k sub o standardization code for in-core INAA

CERN Document Server

Ojo, J O

2002-01-01

A new computer code ZAKI, for k sub o -based INAA standardization, written in Visual Basic for the WINDOWS environment is described. The parameter alpha measuring the deviation of the epithermal neutron spectrum shape from the ideal 1/E shape, and the thermal-to-epithermal flux ratio f, are monitored at each irradiation position for each irradiation using the ''triple bare monitor with k sub o '' technique. Stability of the irradiation position with respect to alpha and f is therefore assumed only for the duration of the irradiation. This now makes it possible to use k sub o standardization even for in-core reactor irradiation channels without an a priori knowledge of alpha and f values as required by existing commercial software. ZAKI is considerably versatile and contains features which allow for use of several detectors at different counting geometries, direct inputting of peak search output from GeniePc, and automatic nuclide identification of all gamma lines using an in-built library. Sample results for ...

Inclusion of nodal option in diffusion conventional codes

International Nuclear Information System (INIS)

Prati, A.; Anaf, J.

1985-01-01

The GCMDT (Generalized Coarse Mesh Diffusion Theory) is studied to use in the 2DB diffusion conventional code. An adequate formalism for its implementation in codes of 'Mesh-Centered' is developed for retangular, triangular and hexagonal geometries. (M.C.K.) [pt

Expensing stock options: a fair-value approach.

Science.gov (United States)

Kaplan, Robert S; Palepu, Krishna G

2003-12-01

Now that companies such as General Electric and Citigroup have accepted the premise that employee stock options are an expense, the debate is shifting from whether to report options on income statements to how to report them. The authors present a new accounting mechanism that maintains the rationale underlying stock option expensing while addressing critics' concerns about measurement error and the lack of reconciliation to actual experience. A procedure they call fair-value expensing adjusts and eventually reconciles cost estimates made at grant date with subsequent changes in the value of the options, and it does so in a way that eliminates forecasting and measurement errors over time. The method captures the chief characteristic of stock option compensation--that employees receive part of their compensation in the form of a contingent claim on the value they are helping to produce. The mechanism involves creating entries on both the asset and equity sides of the balance sheet. On the asset side, companies create a prepaid-compensation account equal to the estimated cost of the options granted; on the owners'-equity side, they create a paid-in capital stock-option account for the same amount. The prepaid-compensation account is then expensed through the income statement, and the stock option account is adjusted on the balance sheet to reflect changes in the estimated fair value of the granted options. The amortization of prepaid compensation is added to the change in the option grant's value to provide the total reported expense of the options grant for the year. At the end of the vesting period, the company uses the fair value of the vested option to make a final adjustment on the income statement to reconcile any difference between that fair value and the total of the amounts already reported.

Code of accounts. Management overview volume: Environmental restoration

International Nuclear Information System (INIS)

Fox, M.B.; Birkholz, H.L.

1997-10-01

The purpose of this procedure is to provide the requirement for assigning cost collection codes and the structure of these codes for all costs incurred for the Environmental Restoration Contract. The coding structure will be used in the budgeting and control of project costs

Computer codes in particle transport physics

International Nuclear Information System (INIS)

Pesic, M.

2004-01-01

is given. Importance of validation and verification of data and computer codes is underlined briefly. Examples of applications of the MCNPX, FLUKA and SHIELD codes to simulation of some of processes in nature, from reactor physics, ion medical therapy, cross section calculations, design of accelerator driven sub-critical systems to astrophysics and shielding of spaceships, are shown. More reliable and more frequent cross sections data in intermediate and high- energy range for particles transport and interactions with mater are expected in near future, as a result of new experimental investigations that are under way with the aim to validate theoretical models applied currently in the codes. These new data libraries are expected to be much larger and more comprehensive than existing ones requiring more computer memory and faster CPUs. Updated versions of the codes to be developed in future, beside sequential computation versions, will also include the MPI or PVM options to allow faster ru: ming of the code at acceptable cost for an end-user. A new option to be implemented in the codes is expected too - an end-user written application for particular problem could be added relatively simple to the general source code script. Initial works on full implementation of graphic user interface for preparing input and analysing output of codes and ability to interrupt and/or continue code running should be upgraded to user-friendly level. (author)

Accounting Policy Options under IFRS: Evidence from Turkey

OpenAIRE

Oguzhan BAHADIR; Buke TOLGA

2013-01-01

Although one of the main purposes of International Accounting Standards Board (IASB) is to improve comparability of financial statements by eliminating different accounting treatments applied by companies, International Financial Reporting Standards (IFRSs) still permit choices in accounting treatment of similar transactions and events. This paper examines the accounting choices made by Turkish listed companies in cases where IFRSs permit a choice between alternative accounting policies. The ...

Transient Model of a 10 MW Supercritical CO{sub 2} Brayton Cycle for Light Water Reactors by using MARS Code

Energy Technology Data Exchange (ETDEWEB)

Park, Joo-Hyun; Park, Hyun Sun; Kim, Moo Hwan [POSTECH, Pohang (Korea, Republic of); Bae, Sung Won; Cha, Jae-Eun [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2016-10-15

In this study, recuperation cycle was chosen as a reference loop design and the MARS code was chosen as the transient cycle analysis code. Cycle design condition is focus on operation point of the light-water reactor. Development of a transient model was performed for 10MW-electron SCO{sub 2} coupled with light water reactors. In order to perform transient analysis, cycle transient model was developed and steady-state run was performed and presented in the paper. In this study, the transient model of SCO{sub 2} recuperation Brayton cycle was developed and implemented in MARS to study the steady-state simulation. We performed nodalization of the transient model using MARS code and obtained steady-state results. This study is shown that the supercritical CO{sub 2} Brayton cycle can be used as a power conversion system for light water reactors. Future work will include transient analysis such as partial road operation, power swing, start-up, and shutdown. Cycle control strategy will be considered for various control method.

Validation and comparison of two-phase flow modeling capabilities of CFD, sub channel and system codes by means of post-test calculations of BFBT transient tests

Energy Technology Data Exchange (ETDEWEB)

Jaeger, Wadim; Manes, Jorge Perez; Imke, Uwe; Escalante, Javier Jimenez; Espinoza, Victor Sanchez, E-mail: victor.sanchez@kit.edu

2013-10-15

Highlights: • Simulation of BFBT turbine and pump transients at multiple scales. • CFD, sub-channel and system codes are used for the comparative study. • Heat transfer models are compared to identify difference between the code predictions. • All three scales predict results in good agreement to experiment. • Sub cooled boiling models are identified as field for future research. -- Abstract: The Institute for Neutron Physics and Reactor Technology (INR) at the Karlsruhe Institute of Technology (KIT) is involved in the validation and qualification of modern thermo hydraulic simulations tools at various scales. In the present paper, the prediction capabilities of four codes from three different scales – NEPTUNE{sub C}FD as fine mesh computational fluid dynamics code, SUBCHANFLOW and COBRA-TF as sub channels codes and TRACE as system code – are assessed with respect to their two-phase flow modeling capabilities. The subject of the investigations is the well-known and widely used data base provided within the NUPEC BFBT benchmark related to BWRs. Void fraction measurements simulating a turbine and a re-circulation pump trip are provided at several axial levels of the bundle. The prediction capabilities of the codes for transient conditions with various combinations of boundary conditions are validated by comparing the code predictions with the experimental data. In addition, the physical models of the different codes are described and compared to each other in order to explain the different results and to identify areas for further improvements.

Description and applicability of the BEFEM-CODE

Energy Technology Data Exchange (ETDEWEB)

Groth, T.

1980-05-15

The BEFEM-CODE, developed for rock mechanics problems in hard rock with joints, is a simple FEM code constructed using triangular and quadrilateral elements. As an option, a joint element of the Goodman type may be used. The Cook-Pian type quadrilateral stress hybrid element was introduced into the version of the code used for the Naesliden project, to replace the constant stress quadrilateral elements. This hybrid element, derived with assumed stress distributions, simplifies the excavation process for use in non-linear models. The shear behavior of the Goodman 1976 joint element has been replaced by Goodman's 1968 formulation. This element makes it possible to take dilation into account, but it was not considered necessary to use dilation to simulate proper joint behavior in the Naesliden project. The code uses Barton's shear strength criteria. Excessive nodal forces due to failure and non-linearities in the joint elements are redistributed with stress transfer iterations. Convergence can be speeded up by dividing each excavation sequence into several loadsteps in which the stiffness matrix is recalculated.

Expensing options solves nothing.

Science.gov (United States)

Sahlman, William A

2002-12-01

The use of stock options for executive compensation has become a lightning rod for public anger, and it's easy to see why. Many top executives grew hugely rich on the back of the gains they made on their options, profits they've been able to keep even as the value they were supposed to create disappeared. The supposed scam works like this: Current accounting regulations let companies ignore the cost of option grants on their income statements, so they can award valuable option packages without affecting reported earnings. Not charging the cost of the grants supposedly leads to overstated earnings, which purportedly translate into unrealistically high share prices, permitting top executives to realize big gains when they exercise their options. If an accounting anomaly is the problem, then the solution seems obvious: Write off executive share options against the current year's revenues. The trouble is, Sahlman writes, expensing option grants won't give us a more accurate view of earnings, won't add any information not already included in the financial statements, and won't even lead to equal treatment of different forms of executive pay. Far worse, expensing evades the real issue, which is whether compensation (options and other-wise) does what it's supposed to do--namely, help a company recruit, retain, and provide the right people with appropriate performance incentives. Any performance-based compensation system has the potential to encourage cheating. Only ethical management, sensible governance, adequate internal control systems, and comprehensive disclosure will save the investor from disaster. If, Sahlman warns, we pass laws that require the expensing of options, thinking that's fixed the fundamental flaws in corporate America's accounting, we will have missed a golden opportunity to focus on the much more extensive defects in the present system.

FBCOT: a fast block coding option for JPEG 2000

Science.gov (United States)

Taubman, David; Naman, Aous; Mathew, Reji

2017-09-01

Based on the EBCOT algorithm, JPEG 2000 finds application in many fields, including high performance scientific, geospatial and video coding applications. Beyond digital cinema, JPEG 2000 is also attractive for low-latency video communications. The main obstacle for some of these applications is the relatively high computational complexity of the block coder, especially at high bit-rates. This paper proposes a drop-in replacement for the JPEG 2000 block coding algorithm, achieving much higher encoding and decoding throughputs, with only modest loss in coding efficiency (typically Coding with Optimized Truncation).

A predictive coding account of bistable perception - a model-based fMRI study.

Science.gov (United States)

Weilnhammer, Veith; Stuke, Heiner; Hesselmann, Guido; Sterzer, Philipp; Schmack, Katharina

2017-05-01

In bistable vision, subjective perception wavers between two interpretations of a constant ambiguous stimulus. This dissociation between conscious perception and sensory stimulation has motivated various empirical studies on the neural correlates of bistable perception, but the neurocomputational mechanism behind endogenous perceptual transitions has remained elusive. Here, we recurred to a generic Bayesian framework of predictive coding and devised a model that casts endogenous perceptual transitions as a consequence of prediction errors emerging from residual evidence for the suppressed percept. Data simulations revealed close similarities between the model's predictions and key temporal characteristics of perceptual bistability, indicating that the model was able to reproduce bistable perception. Fitting the predictive coding model to behavioural data from an fMRI-experiment on bistable perception, we found a correlation across participants between the model parameter encoding perceptual stabilization and the behaviourally measured frequency of perceptual transitions, corroborating that the model successfully accounted for participants' perception. Formal model comparison with established models of bistable perception based on mutual inhibition and adaptation, noise or a combination of adaptation and noise was used for the validation of the predictive coding model against the established models. Most importantly, model-based analyses of the fMRI data revealed that prediction error time-courses derived from the predictive coding model correlated with neural signal time-courses in bilateral inferior frontal gyri and anterior insulae. Voxel-wise model selection indicated a superiority of the predictive coding model over conventional analysis approaches in explaining neural activity in these frontal areas, suggesting that frontal cortex encodes prediction errors that mediate endogenous perceptual transitions in bistable perception. Taken together, our current work

A predictive coding account of bistable perception - a model-based fMRI study.

Directory of Open Access Journals (Sweden)

Veith Weilnhammer

2017-05-01

Full Text Available In bistable vision, subjective perception wavers between two interpretations of a constant ambiguous stimulus. This dissociation between conscious perception and sensory stimulation has motivated various empirical studies on the neural correlates of bistable perception, but the neurocomputational mechanism behind endogenous perceptual transitions has remained elusive. Here, we recurred to a generic Bayesian framework of predictive coding and devised a model that casts endogenous perceptual transitions as a consequence of prediction errors emerging from residual evidence for the suppressed percept. Data simulations revealed close similarities between the model's predictions and key temporal characteristics of perceptual bistability, indicating that the model was able to reproduce bistable perception. Fitting the predictive coding model to behavioural data from an fMRI-experiment on bistable perception, we found a correlation across participants between the model parameter encoding perceptual stabilization and the behaviourally measured frequency of perceptual transitions, corroborating that the model successfully accounted for participants' perception. Formal model comparison with established models of bistable perception based on mutual inhibition and adaptation, noise or a combination of adaptation and noise was used for the validation of the predictive coding model against the established models. Most importantly, model-based analyses of the fMRI data revealed that prediction error time-courses derived from the predictive coding model correlated with neural signal time-courses in bilateral inferior frontal gyri and anterior insulae. Voxel-wise model selection indicated a superiority of the predictive coding model over conventional analysis approaches in explaining neural activity in these frontal areas, suggesting that frontal cortex encodes prediction errors that mediate endogenous perceptual transitions in bistable perception. Taken together

Process Accounting

OpenAIRE

Gilbertson, Keith

2002-01-01

Standard utilities can help you collect and interpret your Linux system's process accounting data. Describes the uses of process accounting, standard process accounting commands, and example code that makes use of process accounting utilities.

Evolution of management accounting research: a review of thematic options in thesis in Brazil

Directory of Open Access Journals (Sweden)

Roberto Rivelino Martins Ribeiro

2013-05-01

Full Text Available This research was conducted with the aim of analyzing the thematic options in thesis in Post-graduate studies in Accounting in Brazil, from 1973 to 2010. It started from the identification of the Brazilian scientific production in management accounting focus of the study, then detect the management practices contemplated that categorized according to the evolutionary stages of IMAP. With regard to the characteristics of the scientific framework adopted, is that this research is descriptive in character, whose problem is analyzed in its qualitative and quantitative aspects, in which strategies were bibliographic, documentary and ex-post facto and primary data using a longitudinal perspective. With use of content analysis and descriptive statistics explored were 256 thesis which was accessed from the programs. In conducting the analysis, there is the prevailing practice and directed to the following conclusions: stage 1, is the predominant absorption costing and variable costing; Stage 2 stands out the budget, stage 3, ABC and strategic planning; and stage 4, EVA, BSC and GECON.

An analysis of options available for developing a common laser ray tracing package for Ares and Kull code frameworks

Energy Technology Data Exchange (ETDEWEB)

Weeratunga, S K

2008-11-06

Ares and Kull are mature code frameworks that support ALE hydrodynamics for a variety of HEDP applications at LLNL, using two widely different meshing approaches. While Ares is based on a 2-D/3-D block-structured mesh data base, Kull is designed to support unstructured, arbitrary polygonal/polyhedral meshes. In addition, both frameworks are capable of running applications on large, distributed-memory parallel machines. Currently, both these frameworks separately support assorted collections of physics packages related to HEDP, including one for the energy deposition by laser/ion-beam ray tracing. This study analyzes the options available for developing a common laser/ion-beam ray tracing package that can be easily shared between these two code frameworks and concludes with a set of recommendations for its development.

Lean coding machine. Facilities target productivity and job satisfaction with coding automation.

Science.gov (United States)

Rollins, Genna

2010-07-01

Facilities are turning to coding automation to help manage the volume of electronic documentation, streamlining workflow, boosting productivity, and increasing job satisfaction. As EHR adoption increases, computer-assisted coding may become a necessity, not an option.

Bidirectional holographic codes and sub-AdS locality

Energy Technology Data Exchange (ETDEWEB)

Yang, Zhao; Hayden, Patrick; Qi, Xiao-Liang [Stanford Institute for Theoretical Physics,Physics Department, Stanford University, CA 94304-4060 (United States)

2016-01-28

Tensor networks implementing quantum error correcting codes have recently been used to construct toy models of holographic duality explicitly realizing some of the more puzzling features of the AdS/CFT correspondence. These models reproduce the Ryu-Takayanagi entropy formula for boundary intervals, and allow bulk operators to be mapped to the boundary in a redundant fashion. These exactly solvable, explicit models have provided valuable insight but nonetheless suffer from many deficiencies, some of which we attempt to address in this article. We propose a new class of tensor network models that subsume the earlier advances and, in addition, incorporate additional features of holographic duality, including: (1) a holographic interpretation of all boundary states, not just those in a “code” subspace, (2) a set of bulk states playing the role of “classical geometries” which reproduce the Ryu-Takayanagi formula for boundary intervals, (3) a bulk gauge symmetry analogous to diffeomorphism invariance in gravitational theories, (4) emergent bulk locality for sufficiently sparse excitations, and (5) the ability to describe geometry at sub-AdS resolutions or even flat space.

Resource flows for health care: Namibia reproductive health sub-accounts

Directory of Open Access Journals (Sweden)

Mbeeli Thomas

2011-12-01

Full Text Available Abstract Background Implementing initiatives to achieve the targets of MDG 5 requires sufficient financial resources that are mobilized and utilized in an equitable, efficient and sustainable manner. Informed decision making to this end requires the availability of reliable health financing information. This is accomplished by means of Reproductive Health (RH sub-account, which captures and organizes expenditure on RH services in two-dimensional tables from financing sources to end users. The specific objectives of this study are: (i to quantify total expenditure on reproductive health services; and (ii to examine the flow of RH funds from sources to end users. Methods The RH sub-account was part of the general National Health Accounts exercise covering the Financial Years 2007/08 and 2008/09. Primary data were collected from employers, medical aid schemes, donors and government ministries using questionnaire. Secondary data were obtained from various documents of the Namibian Government and the health financing database of the World Health Organization. Data were analyzed using a data screen designed in Microsoft Excel. Results RH expenditure per woman of reproductive age was US$ 148 and US$ 126 in the 2007/08 and 2008/09 financial years respectively. This is by far higher than what is observed in most African countries. RH expenditure constituted more than 10-12% of the total expenditure on health. Out-of-pocket payment for RH was minimal (less than 4% of the RH spending in both years. Government is the key source of RH spending. Moreover, the public sector is the main financing agent with programmatic control of RH funds and also the main provider of services. Most of the RH expenditure is spent on services of curative care (both in- and out-patient. The proportion allocated for preventive and public health services was not more than 5% in the two financial years. Conclusion Namibia's expenditure on reproductive health is remarkable by the

Resource flows for health care: Namibia reproductive health sub-accounts.

Science.gov (United States)

Mbeeli, Thomas; Samahiya, Muine; Ravishankar, Nirmala; Zere, Eyob; Kirigia, Joses M

2011-12-24

Implementing initiatives to achieve the targets of MDG 5 requires sufficient financial resources that are mobilized and utilized in an equitable, efficient and sustainable manner. Informed decision making to this end requires the availability of reliable health financing information. This is accomplished by means of Reproductive Health (RH) sub-account, which captures and organizes expenditure on RH services in two-dimensional tables from financing sources to end users. The specific objectives of this study are: (i) to quantify total expenditure on reproductive health services; and (ii) to examine the flow of RH funds from sources to end users. The RH sub-account was part of the general National Health Accounts exercise covering the Financial Years 2007/08 and 2008/09. Primary data were collected from employers, medical aid schemes, donors and government ministries using questionnaire. Secondary data were obtained from various documents of the Namibian Government and the health financing database of the World Health Organization. Data were analyzed using a data screen designed in Microsoft Excel. RH expenditure per woman of reproductive age was US$ 148 and US$ 126 in the 2007/08 and 2008/09 financial years respectively. This is by far higher than what is observed in most African countries. RH expenditure constituted more than 10-12% of the total expenditure on health. Out-of-pocket payment for RH was minimal (less than 4% of the RH spending in both years). Government is the key source of RH spending. Moreover, the public sector is the main financing agent with programmatic control of RH funds and also the main provider of services. Most of the RH expenditure is spent on services of curative care (both in- and out-patient). The proportion allocated for preventive and public health services was not more than 5% in the two financial years. Namibia's expenditure on reproductive health is remarkable by the standards of Africa and other middle-income countries. However

Valuation of European Call Option via Inverse Fourier Transform

Directory of Open Access Journals (Sweden)

Rubenis Oskars

2017-12-01

Full Text Available Very few models allow expressing European call option price in closed form. Out of them, the famous Black- Scholes approach sets strong constraints - innovations should be normally distributed and independent. Availability of a corresponding characteristic function of log returns of underlying asset in analytical form allows pricing European call option by application of inverse Fourier transform. Characteristic function corresponds to Normal Inverse Gaussian (NIG probability density function. NIG distribution is obtained based on assumption that time series of log returns follows APARCH process. Thus, volatility clustering and leptokurtic nature of log returns are taken into account. The Fast Fourier transform based on trapezoidal quadrature is numerically unstable if a standard cumulative probability function is used. To solve the problem, a dampened cumulative probability is introduced. As a computation tool Matlab framework is chosen because it contains many effective vectorization tools that greatly enhance code readability and maintenance. The characteristic function of Normal Inverse Gaussian distribution is taken and exercised with the chosen set of parameters. Finally, the call price dependence on strike price is obtained and rendered in XY plot. Valuation of European call option with analytical form of characteristic function allows further developing models with higher accuracy, as well as developing models for some exotic options.

Microkinetic Modeling of Lean NO<sub>x> Trap Sulfation and Desulfation

Energy Technology Data Exchange (ETDEWEB)

Larson, Richard S. [Sandia National Lab. (SNL-CA), Livermore, CA (United States)

2011-08-01

A microkinetic reaction sub-mechanism designed to account for the sulfation and desulfation of a commercial lean NO<sub>x> trap (LNT) is presented. This set of reactions is appended to a previously developed mechanism for the normal storage and regeneration processes in an LNT in order to provide a comprehensive modeling tool. The reactions describing the storage, release, and reduction of sulfur oxides are patterned after those involving NO<sub>x>, but the number of reactions is kept to the minimum necessary to give an adequate simulation of the experimental observations. Values for the kinetic constants are estimated by fitting semi-quantitatively the somewhat limited experimental data, using a transient plug flow reactor code to model the processes occurring in a single monolith channel. Rigorous thermodynamic constraints are imposed in order to ensure that the overall mechanism is consistent both internally and with the known properties of all gas-phase species. The final mechanism is shown to be capable of reproducing the principal aspects of sulfation/desulfation behavior, most notably (a) the essentially complete trapping of SO<sub>2sub> during normal cycling; (b) the preferential sulfation of NO<sub>x> storage sites over oxygen storage sites and the consequent plug-like and diffuse sulfation profiles; (c) the degradation of NO<sub>x> storage and reduction (NSR) capability with increasing sulfation level; and (d) the mix of H<sub>2sub>S and SO<sub>2sub> evolved during desulfation by temperature-programmed reduction.

The management-retrieval code of the sub-library of atomic mass and characteristic constants for nuclear ground state

International Nuclear Information System (INIS)

Su Zongdi; Ma Lizhen

1994-01-01

The management code of the sub-library of atomic mass and characteristic constants for nuclear ground state (MCC) is used for displaying the basic information on the MCC sub-library on the screen, and retrieving the required data. The MCC data file contains the data of 4800 nuclides ranging from Z 0, A = 1 to Z = 122, A = 318. The MCC sub-library has been set up at Chinese Nuclear Data Center (CNDC), and has been used to provide the atomic masses and characteristic constants of nuclear ground states for the nuclear model calculation, nuclear data evaluations and other fields

Sodium bicarbonate injection: a small-plant SO sub 2 /NO sub x option

Energy Technology Data Exchange (ETDEWEB)

Darmstaedter, E. (NaTec Resources Inc. (USA). Environmental Systems Division)

1990-12-01

The sodium bicarbonate injection process provides a cost effective alternative to flue gas desulfurization for smaller power plants. EPRI and NaTec Resources have been conducting demonstrations on coal-fired utility boilers. 90% SO{sub 2} reduction was achieved in EPRI's High-Sulfur Test Centre 4 MW pilot HYPAS installation near Barker, NY. During 1990 Public Service Company of Colorado and NaTec completed a two-phase commercial demonstration for continuous SO{sub 2}/NO{sub x} control on Cherokee Unit 1 to determine levels of urea and injection locations for urea and sodium bicarbonate to minimise NO{sub 2} and NH{sub 3} emissions while maintaining a high level of SO{sub 2} reduction. Methods for sodium sulphate by-product recovery/sale are described - these are higher value than those from the limestone process. Costs for the whole process, driven by sorbent costs, work out typically for a dry sorbent injection/HYPAS system at $610/ton SO{sub 2} removed. 11 refs., 5 figs., 1 tab.

Systematic screening for mutations in the promoter and the coding region of the 5-HT{sub 1A} gene

Energy Technology Data Exchange (ETDEWEB)

Erdmann, J.; Shimron-Abarbanell, D.; Cichon, S. [Univ. of Bonn (Germany)] [and others

1995-10-09

In the present study we sought to identify genetic variation in the 5-HT{sub 1A} receptor gene which through alteration of protein function or level of expression might contribute to the genetic predisposition to neuropsychiatric diseases. Genomic DNA samples from 159 unrelated subjects (including 45 schizophrenic, 46 bipolar affective, and 43 patients with Tourette`s syndrome, as well as 25 healthy controls) were investigated by single-strand conformation analysis. Overlapping PCR (polymerase chain reaction) fragments covered the whole coding sequence as well as the 5{prime} untranslated region of the 5-HT{sub 1A} gene. The region upstream to the coding sequence we investigated contains a functional promoter. We found two rare nucleotide sequence variants. Both mutations are located in the coding region of the gene: a coding mutation (A{yields}G) in nucleotide position 82 which leads to an amino acid exchange (Ile{yields}Val) in position 28 of the receptor protein and a silent mutation (C{yields}T) in nucleotide position 549. The occurrence of the Ile-28-Val substitution was studied in an extended sample of patients (n = 352) and controls (n = 210) but was found in similar frequencies in all groups. Thus, this mutation is unlikely to play a significant role in the genetic predisposition to the diseases investigated. In conclusion, our study does not provide evidence that the 5-HT{sub 1A} gene plays either a major or a minor role in the genetic predisposition to schizophrenia, bipolar affective disorder, or Tourette`s syndrome. 29 refs., 4 figs., 1 tab.

Increasing the efficiency of the TOUGH code for running large-scale problems in nuclear waste isolation

International Nuclear Information System (INIS)

Nitao, J.J.

1990-08-01

The TOUGH code developed at Lawrence Berkeley Laboratory (LBL) is being extensively used to numerically simulate the thermal and hydrologic environment around nuclear waste packages in the unsaturated zone for the Yucca Mountain Project. At the Lawrence Livermore National Laboratory (LLNL) we have rewritten approximately 80 percent of the TOUGH code to increase its speed and incorporate new options. The geometry of many requires large numbers of computational elements in order to realistically model detailed physical phenomena, and, as a result, large amounts of computer time are needed. In order to increase the speed of the code we have incorporated fast linear equation solvers, vectorization of substantial portions of code, improved automatic time stepping, and implementation of table look-up for the steam table properties. These enhancements have increased the speed of the code for typical problems by a factor of 20 on the Cray 2 computer. In addition to the increase in computational efficiency we have added several options: vapor pressure lowering; equivalent continuum treatment of fractures; energy and material volumetric, mass and flux accounting; and Stefan-Boltzmann radiative heat transfer. 5 refs

FARO and KROTOS code simulation and analysis at JRC Ispra

Energy Technology Data Exchange (ETDEWEB)

Annunziato, A.; Yerkess, A.; Addabbo, C. [European Commission-Joint Research Centre, Inst. for Systems, Informatics and Safety, 21020 Ispra (Italy)

1998-01-01

The paper summarizes relevant results from the pre and post test calculations of fuel coolant interaction and quenching tests performed in the FARO and KROTOS test facilities. The main analytical tools adopted at JRC Ispra are the COMETA and the TEXAS codes. COMETA pre and post test calculations of FARO Test L-20 as well as an application of the code to KROTOS test facility are presented. The analysis provides the need to account for H{sub 2} generation models into the pre-mixing calculations. In addition salient results from the application of TEXAS to FARO and KROTOS tests are shown. (author)

RF Systems for a Proposed Next Step Option (FIRE)

Energy Technology Data Exchange (ETDEWEB)

Carter, M.D.; Swain, D.W.

1999-04-12

FIRE (Fusion Ignition Research Experiment) is a high-field, burning-plasma tokamak that is being studied as a possible option for future fusion research. Preliminary parameters for this machine are R<sub>0sub> approximately equal to 2 m, a approximately equal to 0.5 m, B<sub>0sub> approximately equal to 10 T, and I<sub>p> approximately equal to 6 MA. Magnetic field coils are to be made of copper and precooled with LN<sub>2sub> before each shot. The flat-top pulse length desired is greater than or equal to 10s. Ion cyclotron and lower hybrid rf systems will be used for heating and current drive. Present specifications call for 30 MW of ion cyclotron heating power, with 25 MW of lower hybrid power as an upgrade option.

Atucha II NPP full scope simulator modelling with the thermal hydraulic code TRAC{sub R}T

Energy Technology Data Exchange (ETDEWEB)

Alonso, Pablo Rey; Ruiz, Jose Antonio; Rivero, Norberto, E-mail: prey@tecnatom.e, E-mail: jaruiz@tecnatom.e, E-mail: nrivero@tecnatom.e [Tecnatom S.A., Madrid (Spain)

2011-07-01

In February 2010 NA-SA (Nucleoelectrica Argentina S.A.) awarded Tecnatom the Atucha II full scope simulator project. NA-SA is a public company owner of the Argentinean nuclear power plants. Atucha II is due to enter in operation shortly. Atucha II NPP is a PHWR type plant cooled by the water of the Parana River and has the same design as the Atucha I unit, doubling its power capacity. Atucha II will produce 745 MWe utilizing heavy water as coolant and moderator, and natural uranium as fuel. A plant singular feature is the permanent core refueling. TRAC{sub R}T is the first real time thermal hydraulic six-equations code used in the training simulation industry for NSSS modeling. It is the result from adapting to real time the best estimate code TRACG. TRAC{sub R}T is based on first principle conservation equations for mass, energy and momentum for liquid and steam phases, with two phase flows under non homogeneous and non equilibrium conditions. At present, it has been successfully implemented in twelve full scope replica simulators in different training centers throughout the world. To ease the modeling task, TRAC{sub R}T includes a graphical pre-processing tool designed to optimize this process and alleviate the burden of entering alpha numerical data in an input file. (author)

Modelling approach to LILW-SL repository safety evaluation for different waste packing options

International Nuclear Information System (INIS)

Perko, Janez; Mallants, Dirk; Volckaert, Geert; Towler, George; Egan, Mike; Virsek, Sandi; Hertl, Bojan

2007-01-01

The key objective of the work described here was to support the identification of a preferred disposal concept and packaging option for low and short-lived intermediate level waste (LILW-SL). The emphasis of the assessment, conducted on behalf of the Slovenian radioactive waste management agency (ARAO), was the consideration of several waste treatment and packaging options in an attempt to identify optimised containment characteristics that would result in safe disposal, taking into account the cost-benefit of alternative safety measures. Waste streams for which alternative treatment and packaging solutions were developed and evaluated include decommissioning waste and NPP operational wastes, including drums with unconditioned ion exchange resins in over-packed tube type containers (TTCs). For decommissioning wastes, the disposal options under consideration were either direct disposal of loose pieces grouted into a vault or use of high integrity containers (HIC). In relation to operational wastes, three main options were foreseen. The first is over-packing of resin containing TTCs grouted into high integrity containers, the second option is complete treatment with hydration, neutralization, and cementation of the dry resins into drums grouted into high integrity containers and the third is direct disposal of TTCs into high integrity containers without additional treatment. The long-term safety of radioactive waste repositories is usually demonstrated with the support of a safety assessment. This normally includes modelling of radionuclide release from a multi-barrier near-surface or deep repository to the geosphere and biosphere. For the current work, performance assessment models were developed for each combination of siting option, repository design and waste packaging option. Modelling of releases from the engineered containment system (the 'near-field') was undertaken using the AMBER code. Detailed unsaturated water flow modelling was undertaken using the

RELAP4 stagnation properties option

International Nuclear Information System (INIS)

DeYoung, T.L.

1979-01-01

The stagnation properties option in RELAP4/MOD6 was completely reviewed, from theoretical foundation to code application. The result of this investigation was the identification of a fundamental mismatch between the essentially homogeneous, equilibrium-based, RELAP4 code and the nonhomogeneous and/or nonequilibrium critical flow models imposed on the code. By continuously monitoring fluid Mach numbers and adjusting flow areas such that sonic velocity was never exceeded, the mismatch could be accommodated. This approach was implemented, found to work correctly, and will be incorporated into the MOD7 version of the code

Method for coding low entrophy data

Science.gov (United States)

Yeh, Pen-Shu (Inventor)

1995-01-01

A method of lossless data compression for efficient coding of an electronic signal of information sources of very low information rate is disclosed. In this method, S represents a non-negative source symbol set, (s(sub 0), s(sub 1), s(sub 2), ..., s(sub N-1)) of N symbols with s(sub i) = i. The difference between binary digital data is mapped into symbol set S. Consecutive symbols in symbol set S are then paired into a new symbol set Gamma which defines a non-negative symbol set containing the symbols (gamma(sub m)) obtained as the extension of the original symbol set S. These pairs are then mapped into a comma code which is defined as a coding scheme in which every codeword is terminated with the same comma pattern, such as a 1. This allows a direct coding and decoding of the n-bit positive integer digital data differences without the use of codebooks.

Mother code specifications (Appendix to CEA report 2472)

International Nuclear Information System (INIS)

Pillard, Denise; Soule, Jean-Louis

1964-12-01

The Mother code (written in Fortran for IBM 7094) computes the integral cross section and the first two moments of energy transfer of a thermalizer. Computation organisation and methods are presented in an other document. This document presents code specifications, i.e. input data (for spectrum description, printing options, input record formats, conditions to be met by values), and results (printing formats and options, writing and punching options and formats)

Procedure and code for calculating black control rods taking into account epithermal absorption, code CAS-1; Postupak i program za proracun crnih kontrolnih sipki, uzimajuci u obzir i epitermalnu apsorpciju, CAS-1

Energy Technology Data Exchange (ETDEWEB)

Martinc, R; Trivunac, N; Zivkovic, Z [Boris Kidric Institute of nuclear sciences Vinca, Belgrade (Yugoslavia)

1964-12-15

This report describes the computer code CAS-1, calculation method and procedure applied for calculating the black control rods taking into account the epithermal neutron absorption. Results obtained for supercell method applied for regular lattice reflected in the multiplication medium is part of this report in addition to the computer code manual.

The radiative forcing potential of different climate geoengineering options

Directory of Open Access Journals (Sweden)

T. M. Lenton

2009-08-01

Full Text Available Climate geoengineering proposals seek to rectify the Earth's current and potential future radiative imbalance, either by reducing the absorption of incoming solar (shortwave radiation, or by removing CO<sub>2sub> from the atmosphere and transferring it to long-lived reservoirs, thus increasing outgoing longwave radiation. A fundamental criterion for evaluating geoengineering options is their climate cooling effectiveness, which we quantify here in terms of radiative forcing potential. We use a simple analytical approach, based on energy balance considerations and pulse response functions for the decay of CO<sub>2sub> perturbations. This aids transparency compared to calculations with complex numerical models, but is not intended to be definitive. It allows us to compare the relative effectiveness of a range of proposals. We consider geoengineering options as additional to large reductions in CO<sub>2sub> emissions. By 2050, some land carbon cycle geoengineering options could be of comparable magnitude to mitigation "wedges", but only stratospheric aerosol injections, albedo enhancement of marine stratocumulus clouds, or sunshades in space have the potential to cool the climate back toward its pre-industrial state. Strong mitigation, combined with global-scale air capture and storage, afforestation, and bio-char production, i.e. enhanced CO<sub>2sub> sinks, might be able to bring CO<sub>2sub> back to its pre-industrial level by 2100, thus removing the need for other geoengineering. Alternatively, strong mitigation stabilising CO<sub>2sub> at 500 ppm, combined with geoengineered increases in the albedo of marine stratiform clouds, grasslands, croplands and human settlements might achieve a patchy cancellation of radiative forcing. Ocean fertilisation options are only worthwhile if sustained on a millennial timescale and phosphorus addition may have greater long-term potential than iron or nitrogen fertilisation. Enhancing ocean

Analysis of neutronics and dynamic characteristics with reactivity injection in LBE cooled sub-critical reactor

International Nuclear Information System (INIS)

Chen Sen; Wu Yican; Jin Ming; Chen Zhibin; Bai Yunqing; Zhao Zhumin

2014-01-01

Accelerator Driven Sub-critical System (ADS) has particular neutronics behaviors compared with the critical system. Prompt jump approximation point reactor kinetics equations taken external source into account have been deduced using an approach of prompt jump approximation. And the relationship between injection reactivity and power ampliation has been achieved. In addition, based on the RELAP5 code the prolong development of point reactor kinetics code used into assessing sub-critical system have been promoted. Different sub-criticality (k eff = 0.90, 0.95, 0.97, 0.98 and 0.99) have been assessed in preliminary design of a type of natural circulation cooling sub-critical reactor under conditions of reactivity injection +1 β in one second. It shows that the external source prompt transient approximation method has an accurate solution after injecting reactivity around short time and has a capacity to solve the dynamic equation, and the sub-critical system has an inner stability while the deeper sub-criticality the less impact on the sub-critical system. (authors)

Preliminary Validation and Verification of TURBO{sub D}ESIGN for S-CO{sub 2} Axial Compressor

Energy Technology Data Exchange (ETDEWEB)

Lee, Je Kyoung; Lee, Jeong Ik; Ahn, Yoon Han; Kim, Seong Gu [Korea Advanced Institute of Science and Technology, Daejeon (Korea, Republic of); Yoon, Ho Joon; Addad, Yacine [Khalifa University of Science, Technology and Research, Abu Dhabi (United Arab Emirates)

2012-05-15

To use the advantages of Supercritical CO{sub 2}(S-CO{sub 2}) Brayton cycle for nuclear power plant, KAIST-Khalifa University joint research team has been focusing on S-CO{sub 2} turbomachinery development. TURBO{sub D}ESIGN code is one of the products of our researches to design a turbomachinery. The major feature of TURBO{sub D}ESIGN is that the formulation is based on the real gas and none of the ideal gas assumption was applied to the code. Thus, TURBO{sub D}ESIGN has high flexibility regarding the type of gases. In this paper, preliminary code validation and verification of TURBO{sub D}ESIGN will be discussed for axial type compressor design

Potential for geological sequestration of CO{sub 2} in Switzerland - Final report; Studie zur Abschaetzung des Potenzials fuer CO{sub 2}-Sequestrierung in der Schweiz - Schlussbericht

Energy Technology Data Exchange (ETDEWEB)

Diamond, L. W.; Chevalier, G. [Institut fuer Geologie, Universitaet Bern, Bern (Switzerland); Leu, W. [Geoform AG, Geologische Beratungen und Studien, Villeneuve (former Minusio) (Switzerland)

2010-08-15

One approach to dispose of the greenhouse gas CO{sub 2} is to inject it into deep, porous geological formations, where is remains safely trapped over periods of many millennia. This report evaluates the potential for this option within Switzerland, based on a literature review. Only geological criteria for CO{sub 2} sequestration are taken into account, following international best-practice principles for reservoir safety. Simultaneous consideration of nine geological attributes (including faulting and natural seismicity) allows the sequestration potential to be mapped at a resolution of a few km{sup 2}, using a scale between 0 (negligible potential) and 1 (high potential). It is concluded that the crystalline rocks of the Alps and the sediments underlying the valleys of Valais, Ticino and Grisons are unsuitable for CO{sub 2} sequestration. However, the sedimentary rocks below the Central Plateau (and to lesser extent below the Jura Chain), locally show moderate to very good potential. At least four formations of porous sandstones and limestones (saline aquifers) underlie large areas of the Plateau within the technically favoured depth interval of 800-2500 m. Approximately 5000 km{sup 2} of the Plateau (mostly in the sector Fribourg-Olten-Lucerne) exhibits sequestration potentials above 0.6, offering a theoretical (unproven) storage capacity for approximately 2680 million tonnes of CO{sub 2}. From a purely geological point of view these results are promising. Although the high potentials do not guarantee the feasibility of CO{sub 2} sequestration, they serve as guides to areas that warrant detailed investigation. If this CO{sub 2} storage option is pursued in Switzerland, then more detailed geological investigations and a pilot study would be necessary to prove its feasibility. The assessed risks, leakage-monitoring procedures and non-geological criteria (proximity to CO{sub 2} point-sources, economics, conflicts of use of the subsurface, etc.) would have to be

Facile synthesis of surface N-doped Bi{sub 2}O{sub 2}CO{sub 3}: Origin of visible light photocatalytic activity and in situ DRIFTS studies

Energy Technology Data Exchange (ETDEWEB)

Zhou, Ying, E-mail: yzhou@swpu.edu.cn [State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Xindu Rd. 8, Chengdu 610500 (China); The Center of New Energy Materials and Technology, School of Materials Science and Engineering, Southwest Petroleum University, Xindu Rd. 8, Chengdu 610500 (China); Insititute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany); Zhao, Ziyan [State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation, Southwest Petroleum University, Xindu Rd. 8, Chengdu 610500 (China); The Center of New Energy Materials and Technology, School of Materials Science and Engineering, Southwest Petroleum University, Xindu Rd. 8, Chengdu 610500 (China); Wang, Fang; Cao, Kun [The Center of New Energy Materials and Technology, School of Materials Science and Engineering, Southwest Petroleum University, Xindu Rd. 8, Chengdu 610500 (China); Doronkin, Dmitry E. [Insititute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany); Dong, Fan [College of Environmental and Biological Engineering, Chonqing Technology and Business University, Chongqing 400067 (China); Grunwaldt, Jan-Dierk, E-mail: grunwaldt@kit.edu [Insititute for Chemical Technology and Polymer Chemistry, Karlsruhe Institute of Technology (KIT), 76131 Karlsruhe (Germany)

2016-04-15

Graphical abstract: Surfactant (CTAB) can induce nitrogen interstitially doping in the Bi{sub 2}O{sub 2}CO{sub 3} surface, leading to the formation of localized states from N−O bond, which probably account for the origin of the visible light activity. Moreover, the photocatalytic NO oxidation processes over Bi{sub 2}O{sub 2}CO{sub 3} were successfully monitored for the first time by in situ DRIFTS. - Highlights: • Interstitially doping N in the Bi{sub 2}O{sub 2}CO{sub 3} surface was achieved at room temperature. • N-doped Bi{sub 2}O{sub 2}CO{sub 3} exhibited significantly enhanced visible light photocatalytic activity compared to the pristine Bi{sub 2}O{sub 2}CO{sub 3}. • The formation of localized states from N−O bond could account for the visible light activity of Bi{sub 2}O{sub 2}CO{sub 3}. • The photocatalytic NO oxidation process was monitored by in situ DRIFTS. - Abstract: Bi{sub 2}O{sub 2}CO{sub 3} nanosheets with exposed {001} facets were prepared by a facile room temperature chemical method. Due to the high oxygen atom density in {001} facets of Bi{sub 2}O{sub 2}CO{sub 3}, the addition of cetyltrimethylammonium bromide (CTAB) does not only influence the growth of crystalline Bi{sub 2}O{sub 2}CO{sub 3}, but also modifies the surface properties of Bi{sub 2}O{sub 2}CO{sub 3} through the interaction between CTAB and Bi{sub 2}O{sub 2}CO{sub 3}. Nitrogen from CTAB as dopant interstitially incorporates in the Bi{sub 2}O{sub 2}CO{sub 3} surface evidenced by both experimental and theoretical investigations. Hence, the formation of localized states from N−O bond improves the visible light absorption and charge separation efficiency, which leads to an enhancement of visible light photocatalytic activity toward to the degradation of Rhodamine B (RhB) and oxidation of NO. In addition, the photocatalytic NO oxidation over Bi{sub 2}O{sub 2}CO{sub 3} nanosheets was successfully monitored for the first time using in situ diffuse reflectance infrared Fourier

CO<sub>2sub>-mitigation options for the offshore oil and gas sector

DEFF Research Database (Denmark)

Nguyen, Tuong-Van; Tock, Laurence; Breuhaus, Peter

2016-01-01

, using thermodynamic, economic and environmental indicators. The results indicate the benets of all these options, as the total CO2-emissions can be reduced by more than 15% in all cases, while the avoidance costs vary widely and are highly sensitive to the natural gas price and CO2-tax.......-effcient and environmental-friendly solutions, of which three are assessed in this paper: (i) the implementation of waste heat recovery, (ii) the installation of a CO2-capture unit and (iii) the platform electrication. A North Sea platform is taken as casestudy, and these three options are modelled, analysed and compared...

Calibration of the TIME2 environmental simulation code

International Nuclear Information System (INIS)

Wilmot, R.D.; Hiscock, K.; Lloyd, J.

1991-04-01

The TARGET finite-difference groundwater modelling code has been used to reconstruct the hydrogeological environment of the area around Killingholme, Humberside, UK. Reconstructions have been made for the present day and for three periods during the past 120,000 years. Permeability development in the Chalk and the stratified nature of the current groundwater system act as boundary conditions for these reconstructions. The results from these reconstructions have been compared with values used by the environmental simulation code TIME2. With optimisation of partition coefficients within the water budget sub-model, values for recharge from TIME2 accord closely with those from this study for temperate and boreal conditions. TIME2 over-estimates recharge during tundra climate states because it does not account for permafrost. (author)

Thermal test options

International Nuclear Information System (INIS)

Koski, J.A.; Keltner, N.R.; Sobolik, K.B.

1993-02-01

Shipping containers for radioactive materials must be qualified to meet a thermal accident environment specified in regulations, such at Title 10, Code of Federal Regulations, Part 71. Aimed primarily at the shipping container design, this report discusses the thermal testing options available for meeting the regulatory requirements, and states the advantages and disadvantages of each approach. The principal options considered are testing with radiant heat, furnaces, and open pool fires. The report also identifies some of the facilities available and current contacts. Finally, the report makes some recommendations on the appropriate use of these different testing methods

Low field magnetoresistance effects in fine particles of La sub 0 sub . sub 6 sub 7 Ca sub 0 sub . sub 3 sub 3 MnO sub 3 perovskites

CERN Document Server

Rivas, J; Fondado, A; Rivadulla, F; López-Quintela, M A

2000-01-01

In this work magnetic and magnetotransport experimental data in well-characterized small particles of La sub 0 sub . sub 6 sub 7 Ca sub 0 sub . sub 3 sub 3 MnO sub 3 are presented. Grain size reduction leads to a larger resistivity and a decrease in metal-insulator transition temperature. Intrinsic colossal magnetoresistance (CMR) is destroyed while intergranular one is promoted to larger values. This low field MR can be explained taking into account magnetization data through spin-polarized tunneling model, which ensures an acceptable first-order fit between both magnitudes. Finally, low-temperature resistivity upturn present in small particle size samples can be understood in terms of an electrostatic barrier between grains.

Method of accounting for code safety valve setpoint drift in safety analyses

International Nuclear Information System (INIS)

Rousseau, K.R.; Bergeron, P.A.

1989-01-01

In performing the safety analyses for transients that result in a challenge to the reactor coolant system (RCS) pressure boundary, the general acceptance criterion is that the peak RCS pressure not exceed the American Society of Mechanical Engineers limit of 110% of the design pressure. Without crediting non-safety-grade pressure mitigating systems, protection from this limit is mainly provided by the primary and secondary code safety valves. In theory, the combination of relief capacity and setpoints for these valves is designed to provide this protection. Generally, banks of valves are set at varying setpoints staggered by 15- to 20-psid increments to minimize the number of valves that would open by an overpressure challenge. In practice, however, when these valves are removed and tested (typically during a refueling outage), setpoints are sometimes found to have drifted by >50 psid. This drift should be accounted for during the performance of the safety analysis. This paper describes analyses performed by Yankee Atomic Electric Company (YAEC) to account for setpoint drift in safety valves from testing. The results of these analyses are used to define safety valve operability or acceptance criteria

The RETRAN-03 computer code

International Nuclear Information System (INIS)

Paulsen, M.P.; McFadden, J.H.; Peterson, C.E.; McClure, J.A.; Gose, G.C.; Jensen, P.J.

1991-01-01

The RETRAN-03 code development effort is designed to overcome the major theoretical and practical limitations associated with the RETRAN-02 computer code. The major objectives of the development program are to extend the range of analyses that can be performed with RETRAN, to make the code more dependable and faster running, and to have a more transportable code. The first two objectives are accomplished by developing new models and adding other models to the RETRAN-02 base code. The major model additions for RETRAN-03 are as follows: implicit solution methods for the steady-state and transient forms of the field equations; additional options for the velocity difference equation; a new steady-state initialization option for computer low-power steam generator initial conditions; models for nonequilibrium thermodynamic conditions; and several special-purpose models. The source code and the environmental library for RETRAN-03 are written in standard FORTRAN 77, which allows the last objective to be fulfilled. Some models in RETRAN-02 have been deleted in RETRAN-03. In this paper the changes between RETRAN-02 and RETRAN-03 are reviewed

Designing account management organizations

NARCIS (Netherlands)

Hart, van der H.W.C.; Kempeners, M.A.

1999-01-01

Organizational structures of account management systems are one of the most interesting and controversial parts of account management systems, because of the variety of organizational options that are available. The main focus is on the organization of account management systems and particularly on

Pricing the option adjust spread of Brazilian Eurobonds

OpenAIRE

Gonçalves, Franklin de O.

1997-01-01

This paper presents results of a pricing system to compute the option adjusted spread ("DAS") of Eurobonds issued by Brazilian firms. The system computes the "DAS" over US treasury rates taktng imo account the embedded options present on these bonds. These options can be calls ("callable bond"), puts ("putable bond") or combinations ("callable and putable bond"). The pricing model takes into account the evolution of the term structure along time, is compatible with the observab...

The Civil Liability of Accountants: a study focusing the new Brazilian civil code of 2002 from the perspective of professional ethics

Directory of Open Access Journals (Sweden)

Ketlyn da Silva Pasquali

2016-09-01

Full Text Available One of the trends in the development of accountancy is the alignment of accounting principles, ethics and civil liability. In this context, this study analyzes the perception of accountants with respect to professional ethics and liability in view of the new Brazilian civil code adopted in 2002. To examine professional ethics, we investigated the perception of accountants as to civil liability, the hypotheses of incidence, and preventive measures for protecting rights and interests in light of the new civil code, using a descriptive and quantitative approach.  Data was collected by means of a questionnaire applied to a sample of 52 accountants belonging to the Accountants Union of Cascavel and Region.  Comparisons were made of the responses using graphical analysis and consensus analysis.  On the basis of the results obtained, we can conclude that the accountants  attribute importance to the use of ethics in their professional practice and that there is very strong consensus on the obligation to carry out the accounting profession zealously and with technical expertise. With regard to the degree of knowledge concerning civil responsibility and liability in the execution of their activities, we observed that these professionals know the penalties for malicious and intentional unethical acts in the exercise of the profession. Future research could explore self-assessment for further investigation with the purpose of developing a sense of individual responsibility and critical spirit.

The RealGas and RealGasH2O Options of the TOUGH+ Code for the Simulation of Coupled Fluid and Heat Flow in Tight/Shale Gas Systems

Energy Technology Data Exchange (ETDEWEB)

Moridis, George; Freeman, Craig

2013-09-30

We developed two new EOS additions to the TOUGH+ family of codes, the RealGasH2O and RealGas . The RealGasH2O EOS option describes the non-isothermal two-phase flow of water and a real gas mixture in gas reservoirs, with a particular focus in ultra-tight (such as tight-sand and shale gas) reservoirs. The gas mixture is treated as either a single-pseudo-component having a fixed composition, or as a multicomponent system composed of up to 9 individual real gases. The RealGas option has the same general capabilities, but does not include water, thus describing a single-phase, dry-gas system. In addition to the standard capabilities of all members of the TOUGH+ family of codes (fully-implicit, compositional simulators using both structured and unstructured grids), the capabilities of the two codes include: coupled flow and thermal effects in porous and/or fractured media, real gas behavior, inertial (Klinkenberg) effects, full micro-flow treatment, Darcy and non-Darcy flow through the matrix and fractures of fractured media, single- and multi-component gas sorption onto the grains of the porous media following several isotherm options, discrete and fracture representation, complex matrix-fracture relationships, and porosity-permeability dependence on pressure changes. The two options allow the study of flow and transport of fluids and heat over a wide range of time frames and spatial scales not only in gas reservoirs, but also in problems of geologic storage of greenhouse gas mixtures, and of geothermal reservoirs with multi-component condensable (H2O and CH4) and non-condensable gas mixtures. The codes are verified against available analytical and semi-analytical solutions. Their capabilities are demonstrated in a series of problems of increasing complexity, ranging from isothermal flow in simpler 1D and 2D conventional gas reservoirs, to non-isothermal gas flow in 3D fractured shale gas reservoirs involving 4 types of fractures, micro-flow, non-Darcy flow and gas

The option to expand a project: its assessment with the binomial options pricing model

Directory of Open Access Journals (Sweden)

Salvador Cruz Rambaud

Full Text Available Traditional methods of investment appraisal, like the Net Present Value, are not able to include the value of the operational flexibility of the project. In this paper, real options, and more specifically the option to expand, are assumed to be included in the project information in addition to the expected cash flows. Thus, to calculate the total value of the project, we are going to apply the methodology of the Net Present Value to the different scenarios derived from the existence of the real option to expand. Taking into account the analogy between real and financial options, the value of including an option to expand is explored by using the binomial options pricing model. In this way, estimating the value of the option to expand is a tool which facilitates the control of the uncertainty element implicit in the project. Keywords: Real options, Option to expand, Binomial options pricing model, Investment project appraisal

Interactive computer codes for education and training on nuclear safety and radioprotection

International Nuclear Information System (INIS)

Leszczynski, Francisco

2008-01-01

Two interactive computer codes for education and training on nuclear safety and radioprotection developed at RA6 Reactor Division-Bariloche Atomic Center-CNEA are presented on this paper. The first code named SIMREACT has been developed in order to simulate the control of a research nuclear reactor in real time with a simple but accurate approach. The code solves the equations of neutron punctual kinetics with time variable reactivity. Utilizing the timer of the computer and the controls of a PC keyboard, with an adequate graphic interface, a simulation in real time of the temporal behavior of a research reactor is obtained. The reactivity can be changed by means of the extraction or insertion of control rods. It was implemented also the simulation of automatic pilot and scram. The use of this code is focalized on practices of nuclear reactor control like start-up from the subcritical state with external source up to power to a desired level, change of power level, calibration of a control rod with different methods, and approach to critical condition by interpolation of the answer in function of reactivity. The second code named LICEN has been developed in order to help the studies of all the topics included in examination programs for obtaining licenses for research reactor operators and radioprotection officials. Using the PC mouse, with an adequate graphic interface, the student can gradually learn the topics related with general and special licenses. The general option includes nuclear reactor engineering, radioprotection, nuclear safety, documentation and normative. The specific option includes mandatory documentation, description of the installation and task on normal and emergency situations. For each of these topics there are sub-items with all the relevant information. The objective of this code is to joint in one electronic place a large amount of information which usually it is disseminated on difficult to find separated papers. (author)

Cost-effectiveness of public-health policy options in the presence of pretreatment NNRTI drug resistance in sub-Saharan Africa

DEFF Research Database (Denmark)

Phillips, Andrew N; Cambiano, Valentina; Nakagawa, Fumiyo

2018-01-01

BACKGROUND: There is concern over increasing prevalence of non-nucleoside reverse-transcriptase inhibitor (NNRTI) resistance in people initiating antiretroviral therapy (ART) in low-income and middle-income countries. We assessed the effectiveness and cost-effectiveness of alternative public health...... sources and considers specific drugs and resistance mutations. We used this model to generate multiple setting scenarios mimicking those in sub-Saharan Africa and considered the prevalence of pretreatment NNRTI drug resistance in 2017. We then compared effectiveness and cost-effectiveness of alternative...... policy options. We took a 20 year time horizon, used a cost effectiveness threshold of US$500 per DALY averted, and discounted DALYs and costs at 3% per year. FINDINGS: A transition to use of a dolutegravir as a first-line regimen in all new ART initiators is the option predicted to produce the most...

A Robust Cross Coding Scheme for OFDM Systems

NARCIS (Netherlands)

Shao, X.; Slump, Cornelis H.

2010-01-01

In wireless OFDM-based systems, coding jointly over all the sub-carriers simultaneously performs better than coding separately per sub-carrier. However, the joint coding is not always optimal because its achievable channel capacity (i.e. the maximum data rate) is inversely proportional to the

SENSMG: First-Order Sensitivities of Neutron Reaction Rates, Reaction-Rate Ratios, Leakage, k<sub>eff>, and α Using PARTISN

Energy Technology Data Exchange (ETDEWEB)

Favorite, Jeffrey A. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-11-21

SENSMG is a tool for computing first-order sensitivities of neutron reaction rates, reaction-rate ratios, leakage, k<sub>eff>, and α using the PARTISN multigroup discrete-ordinates code. SENSMG computes sensitivities to all of the transport cross sections and data (total, fission, nu, chi, and all scattering moments), two edit cross sections (absorption and capture), and the density for every isotope and energy group. It also computes sensitivities to the mass density for every material and derivatives with respect to all interface locations. The tool can be used for one-dimensional spherical (r) and two-dimensional cylindrical (r-z) geometries. The tool can be used for fixed-source and eigenvalue problems. The tool implements Generalized Perturbation Theory (GPT) as discussed by Williams and Stacey. Section II of this report describes the theory behind adjoint-based sensitivities, gives the equations that SENSMG solves, and defines the sensitivities that are output. Section III describes the user interface, including the input file and command line options. Section IV describes the output. Section V gives some notes about the coding that may be of interest. Section VI discusses verification, which is ongoing. Section VII lists needs and ideas for future work. Appendix A lists all of the input files whose results are presented in Sec. VI.

Carbon accounting of forest bioenergy: from model calibrations to policy options (Invited)

Science.gov (United States)

Lamers, P.

2013-12-01

knowledge in the field by comparing different state-of-the-art temporal forest carbon modeling efforts, and discusses whether or to what extent a deterministic ';carbon debt' accounting is possible and appropriate. It concludes upon the possible scientific and eventually political choices in temporal carbon accounting for regulatory frameworks including alternative options to address unintentional carbon losses within forest ecosystems/bioenergy systems.

HETERO code, heterogeneous procedure for reactor calculation; Program Hetero, heterogeni postupak proracuna reaktora

Energy Technology Data Exchange (ETDEWEB)

Jovanovic, S M; Raisic, N M [Boris Kidric Institute of Nuclear Sciences Vinca, Beograd (Yugoslavia)

1966-11-15

This report describes the procedure for calculating the parameters of heterogeneous reactor system taking into account the interaction between fuel elements related to established geometry. First part contains the analysis of single fuel element in a diffusion medium, and criticality condition of the reactor system described by superposition of elements interactions. the possibility of performing such analysis by determination of heterogeneous system lattice is described in the second part. Computer code HETERO with the code KETAP (calculation of criticality factor {eta}{sub n} and flux distribution) is part of this report together with the example of RB reactor square lattice.

Users' manual for the FTDRAW (Fault Tree Draw) code

International Nuclear Information System (INIS)

Oikawa, Tetsukuni; Hikawa, Michihiro; Tanabe, Syuichi; Nakamura, Norihiro

1985-02-01

This report provides the information needed to use the FTDRAW (Fault Tree Draw) code, which is designed for drawing a fault tree. The FTDRAW code has several optional functions, such as the overview of a fault tree output, fault tree output in English description, fault tree output in Japanese description and summary tree output. Inputs for the FTDRAW code are component failure rate information and gate information which are filed out by a execution of the FTA-J (Fault Tree Analysis-JAERI) code system and option control data. Using the FTDRAW code, we can get drawings of fault trees which is easy to see, efficiently. (author)

Renner-Teller modelling of recent experimental spectra of H{sub 2}S{sup +}

Energy Technology Data Exchange (ETDEWEB)

Duxbury, Geoffrey [Department of Physics, SUPA, University of Strathclyde, John Anderson Building, 107 Rottenrow, Glagow G4 0NG, Scotland (United Kingdom)

2015-01-22

Recently there has been a renewal of interest in the spectroscopy and dynamics of the formation and fragmentation of the hydrogen sulphide ion, including. rotationally resolved spectra of higher vibrational states of the ∼A{sup 2}A{sub 1}−∼X{sup 2}B{sub 1} system than were obtained previously, and a comprehensive imaging study of the photo-fragmentation routes of highly excited H{sub 2}S{sup +}. In collaboration with Ch. Jungen and A. Alijah I have extended our previous l basis approach to the calculation of the effects of orbital angular momentum in H{sub 2}S{sup +} to include the stretch - bender extensions, with the options of using either the K- or l basis. This new code is being used to calculate the complicated orbital angular momentum and spin-orbit coupling effects responsible for the ro-vibronic pattern measured in some of the new experimental results.

The Experimental Role of Accounting in Shaping Project

DEFF Research Database (Denmark)

Christensen, Mark; Skærbæk, Peter; Tryggestad, Kjell

2016-01-01

, 2009) and the literature on accounting as programs (Miller, 1991, Miller and Power, 2013) by showing how accounting plays an experimental role in shaping the dynamics between a New Public Management programme of outsourcing and its projects. The study illuminates decisionmaking about programs...... and strategic options as a trial of strength involving accounting in an experimental role, in our case, over how to source the facilities management in the Danish Defence Forces. Our contribution is to show how accounting plays an experimental role in generating new and unexpected program options...... of economic experiments with (out-)sourcing options using various accounting data such as; location specific cost data in vivo (real life data like those from the accounting system) for individual barracks, and aggregated cost data and cost projections in vitro ( in a controlled experimental project setting...

Analysis of CO{sub 2} separation by means of monoethanolamine wash as an option for reducing the emissions in Germany; Analyse der CO{sub 2}-Abtrennung mittels Monoethanolamin-Waesche als Emissionsminderungsmassnahme in Deutschland

Energy Technology Data Exchange (ETDEWEB)

Nazarko, Jewgeni; Riensche, Ernst; Blum, Ludger; Menzer, Reinhard; Stolten, Detlef [Forschungszentrum Juelich GmbH, Juelich (DE). Inst. fuer Energieforschung - Brennstoffzellen (IEF-3)

2008-07-01

In the year 2006, the utilization of fossil fuels in the power economy in Germany results in CO{sub 2} emissions of 366 million tons. This corresponds to 43.4 % of the entire CO{sub 2} emissions in Germany. In order to reduce the emissions of carbon dioxide at fossil-fuelled power stations significantly, short term retrofits of the plants are to be considered for the separation and storage of CO{sub 2}. From the perspective of the power production, the downstream absorption of CO{sub 2} with monoethanolamine has several advantages: (a) Successful employment of the amine-wash in other industrial's applications; (b) Conventional operation of the power station qualitatively remains unchanged; (c) The downstream separation is the only option for the separation of CO{sub 2} at existing power stations. However, the separation of carbon dioxide results in further material flows and energy flows by means of the absorption in monoethanolamine. In the contribution under consideration, the authors analyze the effects of the absorption of CO{sub 2} in mono ethanol amine on an individual power station as well as on the emissions of the power economy in Germany.

[Grading the level of suspicion in criminal proceedings, restrictions of the proportionality principle and veto options in forensic autopsies].

Science.gov (United States)

Czerner, Frank

2010-01-01

The article deals with two topics: determination of the necessary level of suspicion for an internal post-mortem examination pursuant to Section 87 (German) Code of Criminal Procedure and options of the family to object to the forensic autopsy. The level of suspicion required in this case is to be regarded as very low, even below that of the initial suspicion, because a detailed opinion as to any third-party fault can only be given after completion of the autopsy. The individual concerned does not have a right to oppose a forensic autopsy while still alive. The same applies to the family. Other than in clinical autopsies, the interest in prosecution is to be considered the higher good to be protected, because at the time of deciding a homicide cannot be ruled out and only an internal examination can furnish the necessary evidence. Consequently, it is appropriate. Contrary to the opinion often expressed in the literature, one cannot infer from the provisions of Sections 87 subs. 4, 33 subs. 3 Code of Criminal Procedure and Section 103 subs. 3 Basic Law that the family of the deceased has a right to be informed or heard. This can only be changed by the legislator in an amendment to the autopsy law.

THREEDANT: A code to perform three-dimensional, neutral particle transport calculations

International Nuclear Information System (INIS)

Alcouffe, R.E.

1994-01-01

The THREEDANT code solves the three-dimensional neutral particle transport equation in its first order, multigroup, discrate ordinate form. The code allows an unlimited number of groups (depending upon the cross section set), angular quadrature up to S-100, and unlimited Pn order again depending upon the cross section set. The code has three options for spatial differencing, diamond with set-to-zero fixup, adaptive weighted diamond, and linear modal. The geometry options are XYZ and RZΘ with a special XYZ option based upon a volume fraction method. This allows objects or bodies of any shape to be modelled as input which gives the code as much geometric description flexibility as the Monte Carlo code MCNP. The transport equation is solved by source iteration accelerated by the DSA method. Both inner and outer iterations are so accelerated. Some results are presented which demonstrate the effectiveness of these techniques. The code is available on several types of computing platforms

Development of a dynamic coupled hydro-geomechanical code and its application to induced seismicity

Science.gov (United States)

Miah, Md Mamun

This research describes the importance of a hydro-geomechanical coupling in the geologic sub-surface environment from fluid injection at geothermal plants, large-scale geological CO2 sequestration for climate mitigation, enhanced oil recovery, and hydraulic fracturing during wells construction in the oil and gas industries. A sequential computational code is developed to capture the multiphysics interaction behavior by linking a flow simulation code TOUGH2 and a geomechanics modeling code PyLith. Numerical formulation of each code is discussed to demonstrate their modeling capabilities. The computational framework involves sequential coupling, and solution of two sub-problems- fluid flow through fractured and porous media and reservoir geomechanics. For each time step of flow calculation, pressure field is passed to the geomechanics code to compute effective stress field and fault slips. A simplified permeability model is implemented in the code that accounts for the permeability of porous and saturated rocks subject to confining stresses. The accuracy of the TOUGH-PyLith coupled simulator is tested by simulating Terzaghi's 1D consolidation problem. The modeling capability of coupled poroelasticity is validated by benchmarking it against Mandel's problem. The code is used to simulate both quasi-static and dynamic earthquake nucleation and slip distribution on a fault from the combined effect of far field tectonic loading and fluid injection by using an appropriate fault constitutive friction model. Results from the quasi-static induced earthquake simulations show a delayed response in earthquake nucleation. This is attributed to the increased total stress in the domain and not accounting for pressure on the fault. However, this issue is resolved in the final chapter in simulating a single event earthquake dynamic rupture. Simulation results show that fluid pressure has a positive effect on slip nucleation and subsequent crack propagation. This is confirmed by

Assessing District-Heating Sustainability. Case Studies of CO{sub 2} Mitigation Strategies and Environmental Cost Accounting

Energy Technology Data Exchange (ETDEWEB)

Fahlen, Elsa

2012-11-01

District heating (DH) may play an important role in achieving the EU goal of a secure, competitive and sustainable energy supply. Integrated energy solutions based on technologies, such as biomass gasification for transport fuel, electricity and heat production and heat-driven absorption cooling, create new optimisation possibilities through the linkage between heat, power, cooling and transport fuel markets which may reduce the global warming contribution of the energy sector. With increasing focus on climate change impacts of greenhouse gas emissions, the environmental effects of other air pollutants should not be neglected. To achieve both a competitive and a sustainable energy supply, it is necessary to integrate environmental considerations into economic policies. Through accounting for external costs of air pollution in energy system modelling and analysis, sustainability aspects may be integrated into DH assessments. The aim of this thesis is to develop, apply and evaluate methodologies for assessing conventional and new technology solutions in a DH system; the assessments are made from a DH perspective with respect to two factors - cost-effectiveness and environmental impacts - which are either assessed separately or integrated through external cost accounting. Various CO{sub 2} mitigation strategies are evaluated with regard to the robustness of the DH system in meeting future developments of energy market prices and policies. The studies are performed using a systems approach by using the simulating DH supply model MARTES as applied to the DH system Sweden. This thesis concludes that the integration of biomass gasification technology and absorption cooling technology in DH systems has the potential for cost-effective CO{sub 2} emission reduction, in line with other EU goals to increase the share of renewable sources in energy use and to increase energy efficiency. Accounting for external costs of not only climate change but also other environmental

Numerical Analysis of S-CO{sub 2} Test Loop Transient Conditions near the Critical Point of CO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Bae, Seong Jun; Oh, Bongseong; Ahn, Yoonhan; Baik, Seongjoon; Lee, Jekyoung; Lee, Jeong Ik [KAIST, Daejeon (Korea, Republic of)

2016-05-15

It was identified that controlling CO{sub 2} compressor operation near the critical point is one of the most important issues to operate a S-CO{sub 2} Brayton cycle with a high efficiency. Despite the growing interest in the S-CO{sub 2} Brayton cycle, a few previous research on the transient analysis of the S-CO{sub 2} system has been conducted previously. Moreover, previous studies have some limitation in the modelled test facility, and the experiment was not performed to observe specific scenario. The KAIST research team has conducted S-CO{sub 2} system transient experiments with the CO{sub 2} compressing test facility called SCO{sub 2}PE (Supercritical CO{sub 2} Pressurizing Experiment) at KAIST In this study, authors use the transient analysis code GAMMA (Gas Multidimensional Multicomponent mixture Analysis) code for analyzing the experiment. Two transient scenarios were selected in this study; over cooling and under cooling situations. The selected transient situation is of particular interest since the compressor inlet conditions start to drift away from the critical point of CO{sub 2}. The results represent that the GAMMA code can simulate the S-CO{sub 2} test facility, SCO{sub 2}PE. However, as shown in the cooling water flow rate increasing scenario, the GAMMA code shows calculation error when the phase change occurs. Furthermore, although the results of the cooling water flow rate decrease case shows reasonable agreement with the experimental data, there are still some unexplained differences between the experimental data and the GAMMA code prediction.

LUCID - an optical design and raytrace code

International Nuclear Information System (INIS)

Nicholas, D.J.; Duffey, K.P.

1980-11-01

A 2D optical design and ray trace code is described. The code can operate either as a geometric optics propagation code or provide a scalar diffraction treatment. There are numerous non-standard options within the code including design and systems optimisation procedures. A number of illustrative problems relating to the design of optical components in the field of high power lasers is included. (author)

Recognition For Index Option Contracts U nder IAS 39 And IFRS 9 – The Case Of Option Contracts Bound To BIST 30 Index

Directory of Open Access Journals (Sweden)

Nevran Karaca

2014-09-01

Full Text Available There is a limited number of academic studies about accoun ting for derivative products but non of them relating to the accounting for index option contracts. Within the scope of the study, it is aimed to indicate accounting regulations and procedures to be followed under IAS 39 and IFRS 9 for option contracts whi ch traded in Futures and Options Exchange. The BIST 30 index option contracts having the highest volume of transaction and traded in VIOP is the main subject of the study via this objective. It is aimed to make the issue explicit by the help of a fictional ized example about these contracts.

INCAS residential building energy savings design code: User's guide. INCAS: guida all'uso del codice di calcolo di diagnosi energetica nell'abitazione

Energy Technology Data Exchange (ETDEWEB)

Carderi, A.

1991-01-01

The INCAS residential building energy savings design code comes complete with data banks giving designers all the necessary technical and economic information and energy savings options for the code's efficacious application to obtain the optimum energy efficient/cost beneficial solution. This user's manual contains descriptions of the types of data to be input, the code's methodology, the data banks, and complete instructions for the code's implementation. The energy savings alternatives include: choice of heating plant and fuel; choice, application location and thickness of thermal insulation. For the case of building heating system retrofits, the code takes into account the existing condition of building components.

Universal Health Coverage in Francophone Sub-Saharan Africa: Assessment of Global Health Experts' Confidence in Policy Options.

Science.gov (United States)

Paul, Elisabeth; Fecher, Fabienne; Meloni, Remo; van Lerberghe, Wim

2018-05-29

Many countries rely on standard recipes for accelerating progress toward universal health coverage (UHC). With limited generalizable empirical evidence, expert confidence and consensus plays a major role in shaping country policy choices. This article presents an exploratory attempt conducted between April and September 2016 to measure confidence and consensus among a panel of global health experts in terms of the effectiveness and feasibility of a number of policy options commonly proposed for achieving UHC in low- and middle-income countries, such as fee exemptions for certain groups of people, ring-fenced domestic health budgets, and public-private partnerships. To ensure a relative homogeneity of contexts, we focused on French-speaking sub-Saharan Africa. We initially used the Delphi method to arrive at expert consensus, but since no consensus emerged after 2 rounds, we adjusted our approach to a statistical analysis of the results from our questionnaire by measuring the degree of consensus on each policy option through 100 (signifying total consensus) minus the size of the interquartile range of the individual scores. Seventeen global health experts from various backgrounds, but with at least 20 years' experience in the broad region, participated in the 2 rounds of the study. The results provide an initial "mapping" of the opinions of a group of experts and suggest interesting lessons. For the 18 policy options proposed, consensus emerged only on strengthening the supply of quality primary health care services (judged as being effective with a confidence score of 79 and consensus score of 90), and on fee exemptions for the poorest (judged as being fairly easy to implement with a confidence score of 66 and consensus score of 85). For none of the 18 common policy options was there consensus on both potential effectiveness and feasibility, with very diverging opinions concerning 5 policy options. The lack of confidence and consensus within the panel seems to

Pool swell sub-scale testing and code comparison

International Nuclear Information System (INIS)

Elisson, K.

1981-01-01

The main objective of the experiment was to investigate the pool swell dynamics in general and the forces on the lowered central part of the diaphragm between drywell and wetwell in particular. Apart from the high speed camera pressure transducers and strain gauges were used to monitor the transient. Data was recorded on a 14 channel FM recorder and then digitalised and plotted. In total more than one hundred tests were performed including parametric variations of for example geometry, break flow, initial drywell pressure and initial water level. In parallel to this experiment pool swell calculations have been performed with the computer codes COPTA and STEALTH. COPTA which is a lumped mass code for pressure suppression containment analysis has a slug pool swell mode. STEALTH which is a general purpose lagrangian hydrodynamics code has been used in a 2-D axisymmetric version. The STEALTH code has been used to calculate the radial variations in the vertical displacement and velocity of the pool surface and to predict the load on the lowered central part of the diaphragm. A comparison between the calculations and the experimental data indicates that both codes are sufficiently correct in their description of the pool swell transient. (orig.)

A Text Messaging Intervention to Support Option B+ in Kenya: A Qualitative Study.

Science.gov (United States)

Musoke, Pamela; Gakumo, C Ann; Abuogi, Lisa L; Akama, Eliud; Bukusi, Elizabeth; Helova, Anna; Nalwa, Wafula Z; Onono, Mariciannah; Spangler, Sydney A; Wanga, Iris; Turan, Janet M

Key challenges in providing lifelong antiretroviral therapy (ART) to pregnant and breastfeeding women (Option B+) in sub-Saharan Africa include achieving long-term adherence and retention in care. One intervention that may help address these challenges is mobile text messaging. We evaluated the acceptability of a text messaging intervention to support women's ART adherence and retention in care in rural western Kenya. Forty in-depth interviews with 20 pregnant/postpartum women infected with HIV, their male partners, and four focus groups with 30 health care providers were conducted during September-November 2014. Data were coded and analyzed using thematic analysis. Findings revealed the following themes: (a) overall acceptability of the text messaging intervention; (b) proposed content of text messages; (c) format, timing, and language of text messages; and (d) potential challenges of the text messaging intervention. Findings were used to refine a text messaging intervention being evaluated at Kenyan study sites rolling out Option B+. Copyright © 2017 Association of Nurses in AIDS Care. Published by Elsevier Inc. All rights reserved.

Cost effectiveness of GHG mitigation options and policy implication

Energy Technology Data Exchange (ETDEWEB)

Lim, K. S. [Korea Institute for Industrial Economics and Trade, Seoul (Korea, Republic of)

1998-04-01

This paper represents the summary findings and conclusions of several studies implemented about microeconomics and macroeconomics marginal costs of GHG abatement policies. Financial, economic, and, where possible, environmental microeconomics costs of reducing GHGs are estimated by a World Bank team. Six energy-related CO{sub 2} mitigation policy options are applied to estimate the macroeconomics costs of GHG emission reduction, the macroeconomics impacts on the Chinese economy. In terms of policy, conservation is a better option to cope with a restrictive mitigation constraint, assuming a developing country can achieve planned energy-saving targets. Without a CO{sub 2} emission constraint or with less restrictive CO{sub 2} emission constraints, however, the simulation results indicate that a conservation strategy may be less attractive than fuel substitution in a developing country, mainly due to the economic dampening effect of reduced production in the energy sectors. This finding suggests that an often-cited costless or negative-cost energy conservation policy may not be a better option when a less restrictive mitigation target is in force. This does not mean that the potential for energy efficiency improvements in a developing country is not worthwhile, but that the overall macroeconomics impacts should be considered before implementing the policy option. (author). 9 refs., 3 figs., 3 tabs.

Crystal structure and X-ray photoelectron spectroscopy study of the transition-metal oxides LaFe sub 1 sub - sub x Cr sub x O sub 3

CERN Document Server

Chen Zhi Gang; Yu Jun; Ibrahim, K; Dong Yu Hui; Wu Zi Yu; Wei Long; Wang Yu Tian

2002-01-01

LaFe sub 1 sub - sub x Cr sub x O sub 3 systematic compounds were prepared by Cr sup 3 sup + doping into the end component LaFeO sub 3. The crystal constants have been evaluated by using MarqX code. The analysis of the XRD data confirms that the perovskite compounds are in their single-phase state. The authors have also performed O 1s core-level photoemission experiments using photon energies above and below Fe 2p absorption edge, respectively, in order to investigate the crystal structure variation trend in terms of electronic structure. A preliminary conclusion has been drawn that the charge transfer amount from 0 2p to Cr 3d varies regularly with the doping level of Cr sup 3 sup + in LaFe sub 1 sub - sub x Cr sub x O sub 3

Power feedback effects in the LEM code

International Nuclear Information System (INIS)

Kromar, M.

1999-01-01

The nodal diffusion code LEM has been extended with the power feedback option. Thermohydraulic and neutronic coupling is covered with the Reactivity Coefficient Method. Presented are results of the code testing. Verification is done on the typical non-uprated NPP Krsko reload cycles. Results show that the code fulfill objectives arising in the process of reactor core analysis.(author)

Spent fuel UO{sub 2} matrix corrosion behaviour studies through alpha-doped UO{sub 2} pellets leaching

Energy Technology Data Exchange (ETDEWEB)

Muzeau, B.; Jegou, C.; Broudic, V. [CEA-Valrho DEN/DTCD/SECM Laboratoire des Materiaux et Procedes Actifs BP 17171 F-30207 Bagnols-sur-Ceze cedex (France)

2005-07-01

Full text of publication follows: The option of direct disposal of spent nuclear fuel in a deep geological formation raises the need to investigate the long-term behaviour of the UO{sub 2} matrix in aqueous media subjected to {alpha}-{beta}-{gamma} radiations. The {beta}-{gamma} emitters account for the most of the activity of spent fuel at the moment it is removed from the reactor, but diminish within a millennial time frame by over three orders of magnitude to less than the long-term activity. The latter persist over much longer time periods and must therefore be taken into account over geological disposal scale. In the present investigation the UO{sub 2} matrix corrosion under alpha radiation is studied as a function of different parameters such as: the alpha activity, the carbonates and hydrogen concentrations,.. In order to study the effect of alpha radiolysis of water on the UO{sub 2} matrix, {sup 238/239}Pu doped UO{sub 2} pellets (0.22 %wt. Pu total) were fabricated with different {sup 238}Pu/{sup 239}Pu ratio to reproduce the alpha activity of a 47 GWd.t{sub HMi}{sup -1} UOX spent fuel at different milestones in time (15, 50, 1500, 10000 and 40000 years). Undoped UO{sub 2} pellets were also available as reference sample. Leaching experiments were conducted in deionized or carbonated water (NaHCO{sub 3} 1 mM), under Argon (O{sub 2} < 0.1 ppm), or Ar/H{sub 2} 30% gas mixture. Previous experiments conducted in deionized water under argon atmosphere, have shown a good correlation between alpha activity and uranium release for the 15-, 1500- and 40000-years alpha doped UO{sub 2} batches. Besides, uranium release in the leachate is controlled either by the kinetics, or by the thermodynamics. Provided the solubility limit of uranium is not achieved, uranium concentration increases and is only limited by the kinetics, unless precipitation occurs and the uranium concentration remains constant over time. These controls are highly dependant on the solution chemistry

Mercury vacancies as divalent acceptors in Hg{sub y}Te{sub 1} {sub –} {sub y}/Cd{sub x}Hg{sub 1} {sub –} {sub x}Te structures with quantum wells

Energy Technology Data Exchange (ETDEWEB)

Kozlov, D. V., E-mail: dvkoz@ipmras.ru; Rumyantsev, V. V.; Morozov, S. V.; Kadykov, A. M.; Fadeev, M. A. [Russian Academy of Sciences, Institute for Physics of Microstructures (Russian Federation); Varavin, V. S.; Mikhailov, N. N.; Dvoretsky, S. A. [Russian Academy of Sciences, Rzhanov Institute of Semiconductor Physics, Siberian Branch (Russian Federation); Gavrilenko, V. I. [Russian Academy of Sciences, Institute for Physics of Microstructures (Russian Federation); Teppe, F. [Laboratoire Charles Coulomb (L2C) (France)

2016-12-15

A long-wavelength band caused by transitions between states related to the valence band is detected in the photoconductivity spectra of Hg{sub y}Te{sub 1–y}/Cd{sub x}Hg{sub 1–x}Te (CMT) structures with quantum wells. The energy states of mercury vacancies in quantum wells of CMT structures is calculated taking into account a chemical shift. It is shown that the long-wavelength band observed in the photoconductivity spectra of these structures is associated with the ionization of divalent acceptor centers which are such vacancies.

Investigations of the influence of H{sub 2}O{sub 2} and NaF on the corrosion on valve metals and steel in systems of practical importance by use of radioisotopes

Energy Technology Data Exchange (ETDEWEB)

Marx, G.; Nehm, C.; Laske, M.; Kupfer, A. [Freie Universitat , Berlin (Germany). Radiochemistry Division

1997-10-01

One of the options to manage radioactive waste in Germany is the direct disposal of this material in salt diapers. The relevant caskets shall optionally consist of steel plated with titanium and its alloys TiGr7 and TiCode12 in order to increase the resistance towards corrosion in salt brines, which might result from intrusion of water into salt domes, a very hypothetical event. The corrosion on these materials was studied by the Radioisotope Method (RIM). The principle of RIM is to measure the corrosion on the neutron activated material under investigation continuously by spectroscopy at various potentials applied, relevant impedance measurements being carried out simultaneously. Not only isotopic but also nonisotopic tracers can be used (Ti {approx_equal}{sup 46}Sc; Ni{approx_equal}{sup 58}Co; {sup 59}Fe). The experiments were carried at 25 degree C, 55 degree C and 80 degree C. The results show that titanium and its alloys will be highly resistant towards corrosion (corrosion rate <0.5{mu}ma{sup -1}) in brines, the resistance being even increased by sulphate, if H{sub 2}O{sub 2}, which might result from radiolysis, is absent. H{sub 2}O{sub 2} drastically increases corrosion on titanium (corrosion rate {approx_equal}20{mu}ma{sup -1} at c(H{sub 2}O{sub 2})=6 10{sup -2}mol. 1{sup -1}) due to TiO{sub 2}{sup 2+} formation and H{sub 2}O{sub 2} decomposition into O{sub 2} and H{sub 2}O, increasing the partial cathodic current density, which results in shifting the rest potential towards more positive values but also extending the active range of titanium. These comparatively high H{sub 2}O{sub 2} concentrations are not in accordance with practical conditions, for which the H{sub 2}0{sub 2} concentration is only approximately 10{sup -6}mol 1{sup -1}. Under these conditions the influence of H{sub 2}0{sub 2} on corrosion on Ti and Ti99.8Pd can be neglected 4 tabs., 6 figs.

Cluster model calculation for X-ray magnetic circular dichroism at rare-earth (R) L sub 2 sub , sub 3 absorption edges in R sub 2 Fe sub 1 sub 4 B

CERN Document Server

Asakura, K; Harada, I; Ogasawara, H; Fukui, K; Kotani, A

2002-01-01

X-ray magnetic circular dichroism (MCD) at the L sub 2 sub , sub 3 absorption edges for the entire series of rare-earth (RE) elements in R sub 2 Fe sub 1 sub 4 B (R=RE) is studied based on a cluster model including 10 RE and 16 Fe atoms. The cluster model takes into account band effects of RE 5d states, to which the electric dipole transition occurs from the core 2p states, as well as spin polarization of the 5d states due to the interatomic hybridization with the spin polarized Fe 3d states. We also take into account spin and orbital polarization of the 5d states due to the 5d-4f intra-atomic exchange interaction, and the 2p to 4f quadrupole transition. The calculated results are in satisfactory agreement with experimental ones, suggesting that the cluster model calculation provides a new method to calculate quantitatively MCD spectra of RE systems with complicated atomic arrangements. (author)

Concentration-dependent photoluminescence of Te-doped In{sub 0.14}Ga{sub 0.86}As{sub 0.13}Sb{sub 0.87}

Energy Technology Data Exchange (ETDEWEB)

Diaz-Reyes, J [CIBA-IPN, Ex-Hacienda de San Juan Molino Km 1.5, Tepetitla, Tlaxcala 90700 (Mexico); Mendoza-Alvarez, J G [Departamento de Fisica, CINVESTAV-IPN, Apartado Postal 14-740, Mexico, DF 07000 (Mexico); Gomez-Herrera, M L [CICATA-IPN, Unidad Legaria, Avenida Legaria 694, Colonia Irrigacion, Mexico, DF 11500 (Mexico)

2006-12-06

Quaternary layers of N-type In{sub x}Ga{sub 1-x}As{sub y}Sb{sub 1-y} were grown by liquid phase epitaxy on (100) GaSb substrates under lattice-matching conditions. Low-temperature photoluminescence spectra were obtained as a function of tellurium concentration. These spectra were interpreted taking into account the nonparabolicity of the conduction band. Calculations of the peak position and photoluminescence transitions were performed. Both the band filled as well as band tailing effects due to Coulomb interaction of free carriers with ionized impurities and shrinkage due to exchange interaction between free carriers were considered in order to properly account for the observed features of the photoluminescence spectra. It is shown that the band-to-band energy transition can be used to obtain the carrier concentration in N-type In{sub x}Ga{sub 1-x}As{sub y}Sb{sub 1-y}, in the range from 1 x 10{sup 16} to 3.42 x 10{sup 18} cm{sup -3}.

A proposal for a unified fuel thermal conductivity model available for UO{sub 2}, (U-Pu)O{sub 2} and UO{sub 2}-GD{sub 2}O{sub 3} PWR fuel

Energy Technology Data Exchange (ETDEWEB)

Baron, D [Electrice de France, Moret-sur-Loing (France); Couty, J C [Electricite de France (EDF), 69 - Villeurbanne (France)

1997-08-01

In order to cope with the current fuel management targets which are focussed on higher discharge burnups, initial {sup 235}U fuel enrichments have been increased from 3.25% to 4%. To avoid an increase in boron concentration in the primary circuit, Gadolinium is used as a burnable poison, spread in the uranium oxide matrix of selected rods, in order to absorb the initial reactivity excess. Obviously, fuel thermal conductivity is affected when introducing any stranger element. Previously, the EDF thermomechanical code provided two different models to simulate the fuel thermal conductivity: one available for UO{sub 2} and (U-Pu)O{sub 2} fuels, the other for Gadolinia fuels, depending on the calculations to be done. No effect of the initial fuel stoichiometry was taken into account in the second model. That situation suggested the development of a unified model available for any fuels presently loaded in the EDF PWR reactors. This paper deals with the choice of the formulation, the data base used and the methodology applied for parameter fitting. Results in terms of measured versus predicted evaluation are then discussed. (author). 11 refs, 5 figs.

Experimental studies of Micro- and Nano-grained UO<sub>2sub>: Grain Growth Behavior, Sufrace Morphology, and Fracture Toughness

Energy Technology Data Exchange (ETDEWEB)

Miao, Yinbin [Argonne National Lab. (ANL), Argonne, IL (United States); Mo, Kun [Argonne National Lab. (ANL), Argonne, IL (United States); Jamison, Laura M. [Argonne National Lab. (ANL), Argonne, IL (United States); Lian, Jie [Rensselaer Polytechnic Inst., Troy, NY (United States); Yao, Tiankai [Rensselaer Polytechnic Inst., Troy, NY (United States); Bhattacharya, Sumit [Argonne National Lab. (ANL), Argonne, IL (United States); Northwestern Univ., Evanston, IL (United States)

2016-01-01

This activity is supported by the US Nuclear Energy Advanced Modeling and Simulation (NEAMS) Fuels Product Line (FPL) and aims at providing experimental data for the validation of the mesoscale simulation code MARMOT. MARMOT is a mesoscale multiphysics code that predicts the coevolution of microstructure and properties within reactor fuel during its lifetime in the reactor. It is an important component of the Moose-Bison-Marmot (MBM) code suite that has been developed by Idaho National Laboratory (INL) to enable next generation fuel performance modeling capability as part of the NEAMS Program FPL. In order to ensure the accuracy of the microstructure-based materials models being developed within the MARMOT code, extensive validation efforts must be carried out. In this report, we summarize the experimental efforts in FY16 including the following important experiments: (1) in-situ grain growth measurement of nano-grained UO<sub>2sub>; (2) investigation of surface morphology in micrograined UO<sub>2sub>; (3) Nano-indentation experiments on nano- and micro-grained UO<sub>2sub>. The highlight of this year is: we have successfully demonstrated our capability to in-situ measure grain size development while maintaining the stoichiometry of nano-grained UO<sub>2sub> materials; the experiment is, for the first time, using synchrotron X-ray diffraction to in-situ measure grain growth behavior of UO<sub>2sub>.

Building a Better Campus: An Update on Building Codes.

Science.gov (United States)

Madden, Michael J.

2002-01-01

Discusses the implications for higher education institutions in terms of facility planning, design, construction, and renovation of the move from regionally-developed model-building codes to two international sets of codes. Also addresses the new performance-based design option within the codes. (EV)

Educational Challenges to Train Accountable Graduates

Directory of Open Access Journals (Sweden)

Mohamadreza Abdolmaleki

2017-04-01

Full Text Available Background and Purpose: social accountability, a concept which is in the focal attention more than ever, is to provide service in the field of medical sciences. We aimed to identify the educational challenges to train accountable graduates in the medical education system to meet social needs.Methods: This study was conducted by qualitative content analysis using in-depth semi-structured interviews with eleven academic members of Kurdistan University of Medical Sciences who were selected by purposeful sampling. The interviews were analyzed using thematic content analysis.Results: The findings of the study consisted of 3 main themes and each one was extracted from categories, sub-categories, and codes. One of the themes was educational program which consisted of 2 categories called defects in the curriculum and inappropriate educational strategies. The second theme was management policies, including macro policies and the policies of the university. The third theme was personal factors which mostly referred to formal and informal education prior to university.Conclusions: The results of the study indicated the educational challenges to train accountable graduates in the medical education system. It seemed that although the results were obtained from Kurdistan University of Medical Sciences, it had many common points with other universities. Therefore, planning and taking appropriate measures to address these challenges can find a way to train accountable graduates in the medical education system to meet social needs.Keywords: SOCIAL ACCOUNTABILITY, EDUCATIONAL SYSTEM, MEDICAL EDUCATION

Mapping of the serotonin 5-HT{sub 1D{alpha}} autoreceptor gene (HTR1D) on chromosome 1 using a silent polymorphism in the coding region

Energy Technology Data Exchange (ETDEWEB)

Ozaki, N.; Lappalainen, J.; Linnoila, M. [National Institute on Alcohol Abuse and Alcoholism, Rockville, MD (United States)] [and others

1995-04-24

Serotonin (5-HT){sub ID} receptors are 5-HT release-regulating autoreceptors in the human brain. Abnormalities in brain 5-HT function have been hypothesized in the pathophysiology of various psychiatric disorders, including obsessive-compulsive disorder, autism, mood disorders, eating disorders, impulsive violent behavior, and alcoholism. Thus, mutations occurring in 5-HT autoreceptors may cause or increase the vulnerability to any of these conditions. 5-HT{sub 1D{alpha}} and 5-HT{sub 1D{Beta}} subtypes have been previously localized to chromosomes 1p36.3-p34.3 and 6q13, respectively, using rodent-human hybrids and in situ localization. In this communication, we report the detection of a 5-HT{sub 1D{alpha}} receptor gene polymorphism by single strand conformation polymorphism (SSCP) analysis of the coding sequence. The polymorphism was used for fine scale linkage mapping of 5-HT{sub 1D{alpha}} on chromosome 1. This polymorphism should also be useful for linkage studies in populations and in families. Our analysis also demonstrates that functionally significant coding sequence variants of the 5-HT{sub 1D{alpha}} are probably not abundant either among alcoholics or in the general population. 14 refs., 1 fig., 1 tab.

The implied volatility of index options: the evidence of options on the Australian SPI 200 index futures

OpenAIRE

Tanha, Hassan

2017-01-01

This thesis is a study of the implied volatility component of the Black and Scholes option-pricing model. A recurring finding in the thesis is that in-the-money and out-of ¬the-money options should not be regarded as being on a continuum, but rather as being inherently "different." Additionally, differences across these options are accounted for in relation to behavioural and consumption based models, which, in turn, provide an explanation for the volatility smile. These findings provide a re...

The structural, electronic and magnetic properties of Ga{sub 8−x}Mn{sub x}As{sub 8} clusters

Energy Technology Data Exchange (ETDEWEB)

Gu, Gangxu [College of Physical Science and Technology, Sichuan University, Chengdu 610064 (China); Key Laboratory of High Energy Density Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); Xiang, Gang, E-mail: gxiang@scu.edu.cn [College of Physical Science and Technology, Sichuan University, Chengdu 610064 (China); Key Laboratory of High Energy Density Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); Luo, Jia; Tang, Zhijie [College of Physical Science and Technology, Sichuan University, Chengdu 610064 (China); Key Laboratory of High Energy Density Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China); Zhang, Xi, E-mail: xizhang@scu.edu.cn [College of Physical Science and Technology, Sichuan University, Chengdu 610064 (China); Key Laboratory of High Energy Density Physics and Technology of Ministry of Education, Sichuan University, Chengdu 610064 (China)

2015-06-15

We systematically investigate the ground-state magnetic properties of Ga{sub 8−x}Mn{sub x}As{sub 8} clusters (x=0, 2, 4, 6, and 8) within the framework of density functional theory (DFT) using a strategy that successively adopts the particle swarm optimization (CALYPSO) code and fixed spin-moment (FSM) method. The results show that for Ga{sub 8−x}Mn{sub x}As{sub 8} in the ground states or low-lying isomers, Mn atoms tend to assemble at the core of the clusters and the ferrimagnetic Mn–Mn couplings are identified for Ga{sub 8−x}Mn{sub x}As{sub 8} (x=4, 6, and 8), while Ga{sub 8}As{sub 8} and Ga{sub 6}Mn{sub 2}As{sub 8} are nonmagnetic. The possibility of multiple ground states of Ga{sub 8−x}Mn{sub x}As{sub 8} (x=4, 6, and 8) is also demonstrated. The binding energy and LUMO–HOMO gap analysis show that Ga{sub 8−x}Mn{sub x}As{sub 8} clusters with large x are more likely synthesized and exhibit stronger chemical reactivity. - Highlights: • The ground-state structural and magnetic configurations of Ga{sub 8-x}Mn{sub x}As{sub 8} clusters are predicted by using the particle swarm optimization (CALYPSO) code and fixed spin-moment method. • For the ground state and low-lying isomers of Ga{sub 8−x}Mn{sub x}As{sub 8} clusters, Mn atoms are gathered at the core of cluster, and ferrimagnetic Mn–Mn coupling is found. • Ga{sub 8−x}Mn{sub x}As{sub 8} with large x is more likely formed and reacts with each other to create larger clusters.

GARCH Option Valuation: Theory and Evidence

DEFF Research Database (Denmark)

Christoffersen, Peter; Jacobs, Kris; Ornthanalai, Chayawat

We survey the theory and empirical evidence on GARCH option valuation models. Our treatment includes the range of functional forms available for the volatility dynamic, multifactor models, nonnormal shock distributions as well as style of pricing kernels typically used. Various strategies...... for empirical implementation are laid out and we also discuss the links between GARCH and stochastic volatility models. In the appendix we provide Matlab computer code for option pricing via Monte Carlo simulation for nonaffine models as well as Fourier inversion for affine models....

High-radix transforms for Reed-Solomon codes over Fermat primes

Science.gov (United States)

Liu, K. Y.; Reed, I. S.; Truong, T. K.

1977-01-01

A method is proposed to streamline the transform decoding algorithm for Reed-Solomon (RS) codes of length equal to 2 raised to the power 2n. It is shown that a high-radix fast Fourier transform (FFT) type algorithm with generator equal to 3 on GF(F sub n), where F sub n is a Fermat prime, can be used to decode RS codes of this length. For a 256-symbol RS code, a radix 4 and radix 16 FFT over GF(F sub 3) require, respectively, 30 and 70% fewer modulo F sub n multiplications than the usual radix 2 FFT.

Index options : Pricing, implied densities and returns

NARCIS (Netherlands)

Boes, M.J.

2006-01-01

Chapter 2 gives an overview of the literature that is directly related to the topics studied in this thesis. In Chapter 3 the impact of overnight periods on option prices is examined by estimating an option pricing model that takes overnight closures of exchanges explicitly into account. Chapter 4

HEU to LEU Conversion and Blending Facility: UF{sub 6} blending alternative to produce LEU UF{sub 6} for commercial use

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-09-01

US DOE is examining options for disposing of surplus weapons-usable fissile materials and storage of all weapons-usable fissile materials; the nuclear material will be converted to a form more proliferation- resistant than the original form. Examining options for increasing the proliferation resistance of highly enriched uranium (HEU) is part of this effort. Five technologies for blending HEU will be assessed; blending as UF{sub 6} to produce a UF{sub 6} product for commercial use is one of them. This document provides data to be used in the environmental impact analysis for the UF{sub 6} blending HEU disposition option. Resource needs, employment needs, waste and emissions from plant, hazards, accident scenarios, and intersite transportation are discussed.

Tracking studies in PEP and description of the computer code PATRICIA

International Nuclear Information System (INIS)

Kheifets, S.

1982-05-01

The code PATRICIA (particle tracking in circular accelerators) is designed mainly for tracking particles in an electron storage ring. A modification of this program is a part of a system of codes PAQUASEX which is designated for configuration survey over a grid of points in the space of main configuration parameters nu/sub x/, nu/sub y/, ν/sub x/, ν/sub y/, and eta/sub x/

Brine Extraction and Treatment Strategies to Enhance Pressure Management and Control of CO<sub>2sub> Plumes in Deep Geologic Formations

Energy Technology Data Exchange (ETDEWEB)

Okwen, Roland [Univ. of Illinois, Champaign, IL (United States). Prairie Research Inst.; Frailey, Scott [Univ. of Illinois, Champaign, IL (United States). Prairie Research Inst.; Dastgheib, Seyed [Univ. of Illinois, Champaign, IL (United States). Prairie Research Inst.

2017-06-14

The overall goal of the this project is to develop and validate pressure management and carbon dioxide (CO<sub>2sub>) plume control strategies that can address technical and economic barriers to commercial deployment of CO<sub>2sub> storage technologies, based on computational and field demonstration work at the Archer Daniels Midland Company (ADM) facility where the Illinois Basin–Decatur Project (IBDP) and the Illinois-Industrial Carbon Capture and Storage (IL-ICCS) projects are located. To accomplish the overall goal, the ISGS designed a brine extraction storage test (BEST) that could be completed in two phases. The goal of BEST Phase I was to evaluate the feasibilities of extraction well(s) placement, the brine extraction to CO<sub>2sub> injection rate ratio, extraction well completion, and brine treatment and handling. The goal of BEST Phase II would be to validate the brine extraction and treatment options deemed feasible in Phase I by (1) demonstrating the efficacy of brine extraction (BE) in managing pressure (i.e., formation) and the CO<sub>2sub> plume, and (2) demonstrating treatment of extracted brine with high total dissolved solids (TDS; >200,000 mg/L) using multiple advanced treatment technologies. This report details work done in Phase I. Several brine extraction and treatment scenarios were tested, simulated, and analyzed for their effectiveness in extracting brine. Initially a vertical well was studied; however, geologic modeling, reservoir modeling, and the existing facility and wellbore infrastructure dictated that the location of a vertical brine extraction well was limited to an area with no existing monitoring wells and where the well would be in relative proximity to an existing CO<sub>2sub> plume. Consequently, a vertical well was excluded, and a horizontal brine extraction well placed above the existing CO<sub>2sub> plume near two existing wells was studied. The horizontal well option allows the project to leverage the

Inelastic neutron scattering studies of TbNiAlH sub 1 sub . sub 4 and UNiAlH sub 2 sub . sub 0 hydrides

CERN Document Server

Bordallo, H N; Kolomiets, A V; Kalceff, W; Nakotte, H; Eckert, J

2003-01-01

The optical vibrations of hydrogen in TbNiAlH sub 1 sub . sub 4 and UNiAlH sub 2 sub . sub 0 were investigated by means of inelastic neutron scattering. The experimental data were analysed, including multiphonon neutron scattering contributions, calculated in an isotropic harmonic approximation. At least two fundamental H optical peaks were observed in TbNiAlH sub 1 sub . sub 4 , and were assigned to the vibrational modes of hydrogen atoms occupying different interstitial sites in the metal sublattice. The high-energy part of the UNiAlH sub 2 sub . sub 0 spectra is characterized by strong anharmonicity, and a broad fundamental band. The latter can be accounted for by a large dispersion of phonon modes due to the strong H-H interactions, and/or different metal-hydrogen force constants, which may originate from different metal atoms surrounding the H atoms in the unit cell.

Development of NRESP98 Monte Carlo codes for the calculation of neutron response functions of neutron detectors. Calculation of the response function of spherical BF{sub 3} proportional counter

Energy Technology Data Exchange (ETDEWEB)

Hashimoto, M.; Saito, K.; Ando, H. [Power Reactor and Nuclear Fuel Development Corp., Oarai, Ibaraki (Japan). Oarai Engineering Center

1998-05-01

The method to calculate the response function of spherical BF{sub 3} proportional counter, which is commonly used as neutron dose rate meter and neutron spectrometer with multi moderator system, is developed. As the calculation code for evaluating the response function, the existing code series NRESP, the Monte Carlo code for the calculation of response function of neutron detectors, is selected. However, the application scope of the existing NRESP is restricted, the NRESP98 is tuned as generally applicable code, with expansion of the geometrical condition, the applicable element, etc. The NRESP98 is tested with the response function of the spherical BF{sub 3} proportional counter. Including the effect of the distribution of amplification factor, the detailed evaluation of the charged particle transportation and the effect of the statistical distribution, the result of NRESP98 calculation fit the experience within {+-}10%. (author)

Integrated intra-subassembly treatment in the SASSYS-1 LMR systems analysis code

Energy Technology Data Exchange (ETDEWEB)

Dunn, F.

1992-09-01

This report discusses a hot channel treatment which has been added to the SASSYS-1 LMR systems analysis code by providing for a multiple pin treatment of each of one or more subassemblies. This is an explicit calculation of intra-subassembly effects, not a hot-channel adjustment to a calculated average channel. Thus, the code can account for effects such as transient flow redistribution, both within a subassembly and among subassemblies. The code now provides a total integrated thermal hydraulic treatment including a multiple pin treatment within subassemblies, a multi-channel treatment of the whole core, and models for the primary coolant loops, the intermediate coolant loops, the steam generators, and the balance of plant. Currently the multiple-pin option is only implemented for single-phase calculations. It is not applicable after the onset of boiling or pin disruption. The new multiple pin treatment is being verified with detailed temperature data from instrumented subassemblies in EBR-II, both steady-state and transient, with special emphasis on passive safety tests such as SHRT-45. For the SHRT-45 test, excellent agreement is obtained between code predictions and experimental measurements of coolant temperatures.

Integrated intra-subassembly treatment in the SASSYS-1 LMR systems analysis code

Energy Technology Data Exchange (ETDEWEB)

Dunn, F.

1992-01-01

This report discusses a hot channel treatment which has been added to the SASSYS-1 LMR systems analysis code by providing for a multiple pin treatment of each of one or more subassemblies. This is an explicit calculation of intra-subassembly effects, not a hot-channel adjustment to a calculated average channel. Thus, the code can account for effects such as transient flow redistribution, both within a subassembly and among subassemblies. The code now provides a total integrated thermal hydraulic treatment including a multiple pin treatment within subassemblies, a multi-channel treatment of the whole core, and models for the primary coolant loops, the intermediate coolant loops, the steam generators, and the balance of plant. Currently the multiple-pin option is only implemented for single-phase calculations. It is not applicable after the onset of boiling or pin disruption. The new multiple pin treatment is being verified with detailed temperature data from instrumented subassemblies in EBR-II, both steady-state and transient, with special emphasis on passive safety tests such as SHRT-45. For the SHRT-45 test, excellent agreement is obtained between code predictions and experimental measurements of coolant temperatures.

Look at nuclear artillery yield options using JANUS, a wargame simulation code

International Nuclear Information System (INIS)

Andre, C.G.

1982-01-01

JANUS, a two-sided, interactive wargame simulation code, was used to explore how using each of several different yield options in a nuclear artillery shell might affect a tactical battlefield simulation. In a general sense, the results or outcomes of these simulations support the results or outcomes of previous studies. In these simulations the Red player knew of the anticipated nuclear capability of the Blue player. Neither side experienced a decisive win over the other, and both continued fighting and experienced losses that, under most historical circumstances, would have been termed unacceptable - that is, something else would have happened (the attack would have been called off). During play, each side had only fragmentary knowledge of the remaining resources on the other side - thus each side desired to continue fighting on the basis of known information. We found that the anticipated use of nuclear weapons by either side affects the character of a game significantly and that, if the employment of nuclear weapons is to have a decided effect on the progress and outcome of a battle, each side will have to have an adequate number of nuclear weapons. In almost all the simulations we ran using JANUS, enhanced radiation (ER) weapons were more effective than 1-kt fission weapons in imposing overall losses on Red. The typical visibility in the JANUS simulation limited each side's ability to acquire units deep into enemy territory and so the 10-kt fission weapon was not useful against enemy tanks that were not engaged in battle

Atomic displacements effects on the electronic properties of Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10}

Energy Technology Data Exchange (ETDEWEB)

Camargo M, J. A. [Fundacion Universitaria Internacional del Tropico Americano, Grupo de Investigacion en Ciencias Basicas, Aplicacion e Innovacion, Carrera 19 No. 39-40, Yopal, Yopal (Colombia); Espitia, D.; Baquero, R., E-mail: jcamargo@unitropico.edu.co [Instituto Politecnico Nacional, Centro de Investigacion y de Estudios Avanzados, Departamento de Fisica, Av. IPN 2508, 07360 Mexico D. F. (Mexico)

2015-07-01

The displacements effects of the oxygen atom associated to the Sr-plane (O3) in the electronic properties of Bi{sub 2}Sr{sub 2}Ca{sub 2}Cu{sub 3}O{sub 10} (Bi-2223), have been investigated using density functional theory. We determined intervals of the O3 atomic positions for which the band structure calculations show that the Bi-O bands, around the high symmetry point M in the irreducible Brillouin zone, emerge towards higher energies avoiding its contribution at Fermi level, as experimentally has been reported. This procedure does not introduce foreign doping elements into the calculation. Our calculations present a good agreement with the angle-resolved photoemission spectroscopy and nuclear magnetic resonance (NMR) experiments. The two options found differ in character (metallic or nonmetallic) of the Bi-O plane. The are not any experiments, to the best of our knowledge, which determine this character for Bi-2223. (Author)

Pricing the Option to Surrender in Incomplete Markets

DEFF Research Database (Denmark)

Consiglio, Andrea; De Giovanni, Domenico

New international accounting standards require insurers to reflect the value of embedded options and guarantees in their products. Pricing techniques based on the Black & Scholes paradigm are often used, however, the hypotheses underneath this model are rarely met. We propose a framework that enc......New international accounting standards require insurers to reflect the value of embedded options and guarantees in their products. Pricing techniques based on the Black & Scholes paradigm are often used, however, the hypotheses underneath this model are rarely met. We propose a framework...... that encompasses the most known sources of incompleteness. We show that the surrender option, joined with a wide range of claims embedded in insurance contracts, can be priced through our tool, and deliver hedging portfolios to mitigate the risk arising from their positions. We provide extensive empirical analysis...... to highlight the effect of incompleteness on the fair value of the option....

Influence of Modelling Options in RELAP5/SCDAPSIM and MAAP4 Computer Codes on Core Melt Progression and Reactor Pressure Vessel Integrity

Directory of Open Access Journals (Sweden)

Siniša Šadek

2010-01-01

Full Text Available RELAP5/SCDAPSIM and MAAP4 are two widely used severe accident computer codes for the integral analysis of the core and the reactor pressure vessel behaviour following the core degradation. The objective of the paper is the comparison of code results obtained by application of different modelling options and the evaluation of influence of thermal hydraulic behaviour of the plant on core damage progression. The analysed transient was postulated station blackout in NPP Krško with a leakage from reactor coolant pump seals. Two groups of calculations were performed where each group had a different break area and, thus, a different leakage rate. Analyses have shown that MAAP4 results were more sensitive to varying thermal hydraulic conditions in the primary system. User-defined parameters had to be carefully selected when the MAAP4 model was developed, in contrast to the RELAP5/SCDAPSIM model where those parameters did not have any significant impact on final results.

Health facility challenges to the provision of Option B+ in western Kenya: a qualitative study.

Science.gov (United States)

Helova, Anna; Akama, Eliud; Bukusi, Elizabeth A; Musoke, Pamela; Nalwa, Wafula Z; Odeny, Thomas A; Onono, Maricianah; Spangler, Sydney A; Turan, Janet M; Wanga, Iris; Abuogi, Lisa L

2017-03-01

Current WHO guidelines recommend lifelong antiretroviral therapy (ART) for all HIV-positive individuals, including pregnant and breastfeeding women (Option B+) in settings with generalized HIV epidemics. While Option B+ is scaled-up in Kenya, insufficient adherence and retention to care could undermine the expected positive impact of Option B+. To explore challenges to the provision of Option B+ at the health facility level, we conducted forty individual gender-matched in-depth interviews with HIV-positive pregnant/postpartum women and their male partners, and four focus groups with thirty health care providers at four health facilities in western Kenya between September-November 2014. Transcripts were coded with the Dedoose software using a coding framework based on the literature, topics from interview guides, and emerging themes from transcripts. Excerpts from broad codes were then fine-coded using an inductive approach. Three major themes emerged: 1) Option B+ specific challenges (same-day initiation into treatment, health care providers unconvinced of the benefits of Option B+, insufficient training); 2) facility resource constraints (staff and drug shortages, long queues, space limitations); and 3) lack of client-friendly services (scolding of patients, inconvenient operating hours, lack of integration of services, administrative requirements). This study highlights important challenges at the health facility level related to Option B+ rollout in western Kenya. Addressing these specific challenges may increase linkage, retention and adherence to life-long ART treatment for pregnant HIV-positive women in Kenya, contribute towards elimination of mother-to-child HIV transmission, and improve maternal and child outcomes.

Suppressed oxygen extraction and degradation of LiNi<sub>xMn_yCo_zO>2sub> cathodes at high charge cut-off voltages

Energy Technology Data Exchange (ETDEWEB)

Zheng, Jianming; Yan, Pengfei; Zhang, Jiandong; Engelhard, Mark H.; Zhu, Zihua; Polzin, Bryant J.; Trask, Steve; Xiao, Jie; Wang, Chongmin; Zhang, Jiguang

2017-09-01

The capacity degradation mechanism in lithium nickel–manganese–cobalt oxide (NMC) cathodes (LiNi<sub>1/3sub>Mn>1/3sub>Co>1/3sub>O>2sub> (NMC<sub>333sub>) and LiNi<sub>0.4sub>Mn>0.4sub>Co>0.2sub>O>2sub> (NMC<sub>442sub>)) during high-voltage (cut-off of 4.8 V) operation has been investigated. In contrast to NMC<sub>442sub>, NMC<sub>333sub> exhibits rapid structural changes including severe micro-crack formation and phase transformation from a layered to a disordered rock-salt structure, as well as interfacial degradation during high-voltage cycling, leading to a rapid increase of the electrode resistance and fast capacity decline. The fundamental reason behind the poor structural and interfacial stability of NMC<sub>333sub> was found to be correlated to its high Co content and the significant overlap between the Co^3+/4+ t<sub>2gsub> and O^2- 2p bands, resulting in oxygen removal and consequent structural changes at high voltages. In addition, oxidation of the electrolyte solvents by the extracted oxygen species generates acidic species, which then attack the electrode surface and form highly resistive LiF. These findings highlight that both the structural and interfacial stability should be taken into account when tailoring cathode materials for high voltage battery systems.

The RealGas and RealGasH2O options of the TOUGH+ code for the simulation of coupled fluid and heat flow in tight/shale gas systems

Science.gov (United States)

We developed two new EOS additions to the TOUGH+ family of codes, the RealGasH2O and RealGas. The RealGasH2O EOS option describes the non-isothermal two-phase flow of water and a real gas mixture in gas reservoirs, with a particular focus in ultra-tight (such as tight-sand and sh...

Characterisation of metal combustion with DUST code

Energy Technology Data Exchange (ETDEWEB)

García-Cascales, José R., E-mail: jr.garcia@upct.es [DITF, ETSII, Universidad Politécnica de Cartagena, Dr Fleming s/n, 30202 Murcia (Spain); Velasco, F.J.S. [Centro Universitario de la Defensa de San Javier, MDE-UPCT, C/Coronel Lopez Peña s/n, 30730 Murcia (Spain); Otón-Martínez, Ramón A.; Espín-Tolosa, S. [DITF, ETSII, Universidad Politécnica de Cartagena, Dr Fleming s/n, 30202 Murcia (Spain); Bentaib, Ahmed; Meynet, Nicolas; Bleyer, Alexandre [Institut de Radioprotection et Sûreté Nucléaire, BP 17, 92260 Fontenay-aux-Roses (France)

2015-10-15

Highlights: • This paper is part of the work carried out by researchers of the Technical University of Cartagena, Spain and the Institute of Radioprotection and Nuclear Security of France. • We have developed a code for the study of mobilisation and combustion that we have called DUST by using CAST3M, a multipurpose software for studying many different problems of Mechanical Engineering. • In this paper, we present the model implemented in the code to characterise metal combustion which describes the combustion model, the kinetic reaction rates adopted and includes a first comparison between experimental data and calculated ones. • The results are quite promising although suggest that improvement must be made on the kinetic of the reaction taking place. - Abstract: The code DUST is a CFD code developed by the Technical University of Cartagena, Spain and the Institute of Radioprotection and Nuclear Security, France (IRSN) with the objective to assess the dust explosion hazard in the vacuum vessel of ITER. Thus, DUST code permits the analysis of dust spatial distribution, remobilisation and entrainment, explosion, and combustion. Some assumptions such as particle incompressibility and negligible effect of pressure on the solid phase make the model quite appealing from the mathematical point of view, as the systems of equations that characterise the behaviour of the solid and gaseous phases are decoupled. The objective of this work is to present the model implemented in the code to characterise metal combustion. In order to evaluate its ability analysing reactive mixtures of multicomponent gases and multicomponent solids, two combustion problems are studied, namely H{sub 2}/N{sub 2}/O{sub 2}/C and H{sub 2}/N{sub 2}/O{sub 2}/W mixtures. The system of equations considered and finite volume approach are briefly presented. The closure relationships used are commented and special attention is paid to the reaction rate correlations used in the model. The numerical

The Perception of the Accounting Students on the Image of the Accountant and the Accounting Profession

Directory of Open Access Journals (Sweden)

Lucian Cernuşca

2015-01-01

Full Text Available This study aims to present the perception of the accounting students on the accountant image and the accounting profession, thus contributing to a better understanding of the option for the field of accounting and the motivations for choosing this profession. The paper consists of the following parts: introduction, literature review, research methodology, research findings, conclusions and bibliography. The accounting profession must be aligned to the current conditions the Romanian accounting system is going through to harmonize to the IFRS and European regulations and the development of information technologies and the transition to digital era. The role of the accountant changes from a simple digit operator to a modern one. This will be part of the managerial team, provide strategic and financial advice and effective solutions for the proper functioning of the organization, the modern stereotype involving creativity in the accounting activities. The research aims at understanding the role of the accounting profession as a social identity and as a social phenomenon and the implications for academia and professional bodies.

Code HEX-Z-DMG for support of accounting for and control of nuclear material software system as part of international safeguards system at BN-350 site

International Nuclear Information System (INIS)

Bushmakin, A.G.; Schaefer, B.

1999-01-01

A code for the computation of the global neutron distribution in the three-dimensional hexagonal-z geometry and multi-group diffusion approximation was developed at BN-350 as the main part of the BN-350 accounting for and control of nuclear material software system. This software system includes: the model for stationary distributions of neutrons; the model to calculate isotope compositions changing; the model of refueling operations; To develop this system next two principal problems were solved: to make a micro cross sections library for all nuclides for the BN-350 reactor core; to develop the code for the computation of the global neutron distribution. To solve first task the twenty-six-energy-groups micro cross sections library for more than seventy nuclides was produced. To solve second task the three-dimensional hexagonal-z geometry and multi-group diffusion approximation code was developed. This code (HEX-Z-DMG) was based on the solution of the multi groups diffusion equation using the standard net approach. The series of calculations was performed in the twenty-six-energy-groups representation using this code. We compared eigenvalues (k eff ), a worth added during refueling operations, spatial and energy-group-dependent neutron flux distributions with results of calculation using other code (DIF3D). After the series of these calculations we can say that the HEX-Z-DMG code is well established to use as the part of the BN-350 accounting for and control of nuclear material software system. (author)

CNEA/ANL collaboration program to develop an optimized version of DART validation and assessment by means of U{sub 3}Si{sub x} and U{sub 3}O{sub 8-}Al dispersed CNEA miniplate irradiation behavior.

Energy Technology Data Exchange (ETDEWEB)

Solis, D.

1998-10-16

The DART code is based upon a thermomechanical model that can predict swelling, recrystallization, fuel-meat interdiffusion and other issues related with MTR dispersed FE behavior under irradiation. As a part of a common effort to develop an optimized version of DART, a comparison between DART predictions and CNEA miniplates irradiation experimental data was made. The irradiation took place during 1981-82 for U3O8 miniplates and 1985-86 for U{sub 3}Si{sub x} at Oak Ridge Research Reactor (ORR). The microphotographs were studied by means of IMAWIN 3.0 Image Analysis Code and different fission gas bubbles distributions were obtained. Also it was possible to find and identify different morphologic zones. In both kinds of fuels, different phases were recognized, like particle peripheral zones with evidence of Al-U reaction, internal recrystallized zones and bubbles. A very good agreement between code prediction and irradiation results was found. The few discrepancies are due to local, fabrication and irradiation uncertainties, as the presence of U{sub 3}Si phase in U{sub 3}Si{sub 2} particles and effective burnup.

Language Recognition via Sparse Coding

Science.gov (United States)

2016-09-08

explanation is that sparse coding can achieve a near-optimal approximation of much complicated nonlinear relationship through local and piecewise linear...training examples, where x(i) ∈ RN is the ith example in the batch. Optionally, X can be normalized and whitened before sparse coding for better result...normalized input vectors are then ZCA- whitened [20]. Em- pirically, we choose ZCA- whitening over PCA- whitening , and there is no dimensionality reduction

ComboCoding: Combined intra-/inter-flow network coding for TCP over disruptive MANETs

Directory of Open Access Journals (Sweden)

Chien-Chia Chen

2011-07-01

Full Text Available TCP over wireless networks is challenging due to random losses and ACK interference. Although network coding schemes have been proposed to improve TCP robustness against extreme random losses, a critical problem still remains of DATA–ACK interference. To address this issue, we use inter-flow coding between DATA and ACK to reduce the number of transmissions among nodes. In addition, we also utilize a “pipeline” random linear coding scheme with adaptive redundancy to overcome high packet loss over unreliable links. The resulting coding scheme, ComboCoding, combines intra-flow and inter-flow coding to provide robust TCP transmission in disruptive wireless networks. The main contributions of our scheme are twofold; the efficient combination of random linear coding and XOR coding on bi-directional streams (DATA and ACK, and the novel redundancy control scheme that adapts to time-varying and space-varying link loss. The adaptive ComboCoding was tested on a variable hop string topology with unstable links and on a multipath MANET with dynamic topology. Simulation results show that TCP with ComboCoding delivers higher throughput than with other coding options in high loss and mobile scenarios, while introducing minimal overhead in normal operation.

OPTION(5) versus OPTION(12) instruments to appreciate the extent to which healthcare providers involve patients in decision-making.

Science.gov (United States)

Stubenrouch, Fabienne E; Pieterse, Arwen H; Falkenberg, Rijan; Santema, T Katrien B; Stiggelbout, Anne M; van der Weijden, Trudy; Aarts, J Annemijn W M; Ubbink, Dirk T

2016-06-01

The 12-item "observing patient involvement" (OPTION(12))-instrument is commonly used to assess the extent to which healthcare providers involve patients in health-related decision-making. The five-item version (OPTION(5)) claims to be a more efficient measure. In this study we compared the Dutch versions of the OPTION-instruments in terms of inter-rater agreement and correlation in outpatient doctor-patient consultations in various settings, to learn if we can safely switch to the shorter OPTION(5)-instrument. Two raters coded 60 audiotaped vascular surgery and oncology patient consultations using OPTION(12) and OPTION(5). Unweighted Cohen's kappa was used to compute inter-rater agreement on item-level. The association between the total scores of the two OPTION-instruments was investigated using Pearson's correlation coefficient (r) and a Bland & Altman plot. After fine-tuning the OPTION-manuals, inter-rater agreement for OPTION(12) and OPTION(5) was good to excellent (kappa range 0.69-0.85 and 0.63-0.72, respectively). Mean total scores were 23.7 (OPTION(12); SD=7.8) and 39.3 (OPTION(5); SD=12.7). Correlation between the total scores was high (r=0.71; p=0.01). OPTION(5) scored systematically higher with a wider range than OPTION(12). Both OPTION-instruments had a good inter-rater agreement and correlated well. OPTION(5) seems to differentiate better between various levels of patient involvement. The OPTION(5)-instrument is recommended for clinical application. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

Real depletion in nodal diffusion codes

International Nuclear Information System (INIS)

Petkov, P.T.

2002-01-01

The fuel depletion is described by more than one hundred fuel isotopes in the advanced lattice codes like HELIOS, but only a few fuel isotopes are accounted for even in the advanced steady-state diffusion codes. The general assumption that the number densities of the majority of the fuel isotopes depend only on the fuel burnup is seriously in error if high burnup is considered. The real depletion conditions in the reactor core differ from the asymptotic ones at the stage of lattice depletion calculations. This study reveals which fuel isotopes should be explicitly accounted for in the diffusion codes in order to predict adequately the real depletion effects in the core. A somewhat strange conclusion is that if the real number densities of the main fissionable isotopes are not explicitly accounted for in the diffusion code, then Sm-149 should not be accounted for either, because the net error in k-inf is smaller (Authors)

Estimated critical conditions for UO[sub 2]F[sub 2]--H[sub 2]O systems in fully water-reflected spherical geometry

Energy Technology Data Exchange (ETDEWEB)

Jordan, W.C.; Turner, J.C.

1992-12-01

The purpose of this report is to document reference calculations performed using the SCALE-4.0 code system to determine the critical parameters of UO[sub 2]F[sub 2]-H[sub 2]O spheres. The calculations are an extension of those documented in ORNL/CSD/TM-284. Specifically, the data for low-enriched UO[sub 2]F[sub 2]-H[sub 2]O spheres have been extended to highly enriched uranium. These calculations, together with those reported in ORNL/CSD/TM-284, provide a consistent set of critical parameters (k[sub [infinity

Coding in pigeons: Multiple-coding versus single-code/default strategies.

Science.gov (United States)

Pinto, Carlos; Machado, Armando

2015-05-01

To investigate the coding strategies that pigeons may use in a temporal discrimination tasks, pigeons were trained on a matching-to-sample procedure with three sample durations (2s, 6s and 18s) and two comparisons (red and green hues). One comparison was correct following 2-s samples and the other was correct following both 6-s and 18-s samples. Tests were then run to contrast the predictions of two hypotheses concerning the pigeons' coding strategies, the multiple-coding and the single-code/default. According to the multiple-coding hypothesis, three response rules are acquired, one for each sample. According to the single-code/default hypothesis, only two response rules are acquired, one for the 2-s sample and a "default" rule for any other duration. In retention interval tests, pigeons preferred the "default" key, a result predicted by the single-code/default hypothesis. In no-sample tests, pigeons preferred the key associated with the 2-s sample, a result predicted by multiple-coding. Finally, in generalization tests, when the sample duration equaled 3.5s, the geometric mean of 2s and 6s, pigeons preferred the key associated with the 6-s and 18-s samples, a result predicted by the single-code/default hypothesis. The pattern of results suggests the need for models that take into account multiple sources of stimulus control. © Society for the Experimental Analysis of Behavior.

Cement reactivity in CO{sub 2} saturated brines: use of a reactive transport code to highlight key degradation mechanisms

Energy Technology Data Exchange (ETDEWEB)

Huet, B.M.; Prevost, J.H.; Scherer, G.W. [Princeton Univ., NJ (United States)

2007-07-01

A modular reactive transport code is proposed to analyze the reactivity of cement in CO{sub 2} saturated brine. The coupling of the transport module and the geochemical module within Dynaflow{sup TM} is derived. Both modules are coupled in a sequential iterative approach to accurately model: (1) mineral dissolution/precipitation and (2) porosity dependent transport properties. Results of the model reproduce qualitatively the dissolution of cement hydrates (C-H, C-S-H, AFm, AFt) and intermediate products (CaCO{sub 3}) into the brine. Slight discrepancies between modeling and experimental results were found concerning the dynamics of the mineral zoning. Results suggest that the power law relationship to model effective transport properties from porosity values is not accurate for very reactive case. (authors)

LABAN-PEL: a two-dimensional, multigroup diffusion, high-order response matrix code

International Nuclear Information System (INIS)

Mueller, E.Z.

1991-06-01

The capabilities of LABAN-PEL is described. LABAN-PEL is a modified version of the two-dimensional, high-order response matrix code, LABAN, written by Lindahl. The new version extends the capabilities of the original code with regard to the treatment of neutron migration by including an option to utilize full group-to-group diffusion coefficient matrices. In addition, the code has been converted from single to double precision and the necessary routines added to activate its multigroup capability. The coding has also been converted to standard FORTRAN-77 to enhance the portability of the code. Details regarding the input data requirements and calculational options of LABAN-PEL are provided. 13 refs

Coding Partitions

Directory of Open Access Journals (Sweden)

Fabio Burderi

2007-05-01

Full Text Available Motivated by the study of decipherability conditions for codes weaker than Unique Decipherability (UD, we introduce the notion of coding partition. Such a notion generalizes that of UD code and, for codes that are not UD, allows to recover the ``unique decipherability" at the level of the classes of the partition. By tacking into account the natural order between the partitions, we define the characteristic partition of a code X as the finest coding partition of X. This leads to introduce the canonical decomposition of a code in at most one unambiguouscomponent and other (if any totally ambiguouscomponents. In the case the code is finite, we give an algorithm for computing its canonical partition. This, in particular, allows to decide whether a given partition of a finite code X is a coding partition. This last problem is then approached in the case the code is a rational set. We prove its decidability under the hypothesis that the partition contains a finite number of classes and each class is a rational set. Moreover we conjecture that the canonical partition satisfies such a hypothesis. Finally we consider also some relationships between coding partitions and varieties of codes.

Computation of the bounce-average code

International Nuclear Information System (INIS)

Cutler, T.A.; Pearlstein, L.D.; Rensink, M.E.

1977-01-01

The bounce-average computer code simulates the two-dimensional velocity transport of ions in a mirror machine. The code evaluates and bounce-averages the collision operator and sources along the field line. A self-consistent equilibrium magnetic field is also computed using the long-thin approximation. Optionally included are terms that maintain μ, J invariance as the magnetic field changes in time. The assumptions and analysis that form the foundation of the bounce-average code are described. When references can be cited, the required results are merely stated and explained briefly. A listing of the code is appended

Investigations on H{sub 2} combustion processes; Untersuchungen zu H{sub 2}-Verbrennungsvorgaengen

Energy Technology Data Exchange (ETDEWEB)

Breitung, W.; Hesselschwerdt, E.; Massier, H.; Moeschke, M.; Redlinger, R.; Wilkening, H.; Werle, H.; Wolff, J.

1995-08-01

During 1994 results were obtained for turbulent deflagrations, detonation ignition criteria, and detonations. In the field of turbulent deflagrations, two different 2-d codes have been developed, which are capable of describing the large spectrum of combustion regimes important for severe accident analysis. Two series of large scale experiments on turbulent H{sub 2}-air combustion have been completed, one with premixed atmospheres, one with dynamic H{sub 2}-injection into the test volume. They provided new clean data for code evaluation on reactor relevant scale (up to 480 m{sup 3} volume). In the field of detonation ignition criteria different mechanisms were investigated which can trigger a transition from deflagration to detonation (DDT). Large scale experiments were performed on turbulent jet ignition of unconfined H{sub 2}-air mixtures. As in earlier small scale tests, detonation ignition was only observed above 25% hydrogen in air. Such reactive mixtures will be rare in severe accidents. Pressure wave focussing was also investigated experimentally. The Mach numbers necessary to trigger a local detonation in different geometries and in different H{sub 2}-air mixtures were measured on small scale. The conditions necessary for a shockless detonation ignition by induction time gradients were calculated. Only close to the reactor pressure vessel the corresponding temperatures and temperature gradients can possibly exist, not in the remainder of the containment. In the field of detonation modeling the code development was completed. Detonation experiments were performed in a 12 m tube equipped with complex obstacles. Some of the data were used to validate the codes. The remaining analysis will be performed in early 1995. The codes can describe well all important physical phenomena which influence detonation loads in complex 3-d geometries. The validated codes were used to calculate local detonation loads in a preliminary EPR containment. (orig./HP)

Color-Coded Front-of-Pack Nutrition Labels—An Option for US Packaged Foods?

Science.gov (United States)

Dunford, Elizabeth K.; Poti, Jennifer M.; Xavier, Dagan; Webster, Jacqui L.; Taillie, Lindsey Smith

2017-01-01

The implementation of a standardized front-of-pack-labelling (FoPL) scheme would likely be a useful tool for many consumers trying to improve the healthfulness of their diets. Our objective was to examine what the traffic light labelling scheme would look like if implemented in the US. Data were extracted from Label Insight’s Open Access branded food database in 2017. Nutrient levels and the proportion of products classified as “Red” (High), “Amber” (Medium) or “Green” (Low) in total fat, saturated fat, total sugar and sodium for food and beverage items were examined. The proportion of products in each category that had each possible combination of traffic light colors, and met the aggregate score for “healthy” was examined. Out of 175,198 products, >50% of all US packaged foods received a “Red” rating for total sugar and sodium. “Confectionery” had the highest mean total sugar (51.9 g/100 g) and “Meat and meat alternatives” the highest mean sodium (781 mg/100 g). The most common traffic light label combination was “Red” for total fat, saturated fat and sodium and “Green” for sugar. Only 30.1% of products were considered “healthy”. A wide variety (n = 80) of traffic light color combinations were observed. A color coded traffic light scheme appears to be an option for implementation across the US packaged food supply to support consumers in making healthier food choices. PMID:28489037

Electronic structure of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} by DFT and QMC

Energy Technology Data Exchange (ETDEWEB)

Ghafari, Aliakbar; Janowitz, Christoph; Manzke, Recardo [Institute of Physics, Humboldt University of Berlin, Newtonstr. 15, D-12489 Berlin (Germany); Haghighi Mood, Kaveh [Dept. of Physics, Science and Research Branch (IAU), Tehran (Iran, Islamic Republic of)

2012-07-01

The electronic structure of high-T{sub c} cuprates superconductors (HTCS) is among the most interesting issues of condensed matter physics since their discovery by Bednorz and Mueller. It has been proven that the antiferromagnetic ground state of the parent compound of the HTCS is not accessible by using local density approximation (LDA) and generalized gradient approximation (GGA) as exchange-correlation energy functionals within density functional theory (DFT). Therefore, we calculated the electronic structure of Bi{sub 2}Sr{sub 2}CaCu{sub 2}O{sub 8} by adding the Hubbard parameter to DFT(GGA+U) and quantum Monte Carlo (QMC) methods. The calculations have been performed by Wien2k and Casino codes for GGA+U and QMC, respectively.

Option Agreement and the Promise to Contract as Established in the New Romanian Civil Code

OpenAIRE

Ilie,Urs

2013-01-01

In the Romanian private law, the option agreement is not a unilateral promise to sell, neither a variety of the unilateral promise to sell, but a contract with an option right. The option agreement is a contract with an option right, under which one of the parties shall undertake to stick to its offer to enter into a given contract, as he has already consented to that, whereas the other party, the beneficiary, shall be entitled to accept or refuse the offer; the use of the acceptance right is...

Effect of alpha irradiation on UO{sub 2} surface reactivity in aqueous media

Energy Technology Data Exchange (ETDEWEB)

Jegou, C.; Muzeau, B.; Broudic, V.; Poulesquen, A.; Roudil, D. [Commissariat a l' Energie Atomique (CEA), Rhone Valley Research Center, DIEC/SESC/LMPA, Bagnols-sur-Ceze (France); Jorion, F. [Commissariat a l' Energie Atomique (CEA), Rhone Valley Research Center, DRCP/SE2A/LEMA, Bagnols-sur-Ceze (France); Corbel, C. [Commissariat a l' Energie Atomique (CEA), Saclay Research Center, DSM/DRECAM/SCM, Gif sur Yvette (France)

2005-07-01

The option of direct disposal of spent nuclear fuel in a deep geological formation raises the need to investigate the long-term behavior of the UO{sub 2} matrix in aqueous media subjected to {alpha}-{beta}-{gamma} radiation. The {beta}-{gamma} emitters account for most of the activity of spent fuel at the moment it is removed from the reactor, but diminish within a millennial time frame by over three orders of magnitude to less than the long-term activity. The latter persists over much longer time periods and must therefore be taken into account over a geological disposal time scale. Leaching experiments with solution renewal were carried out on UO{sub 2} pellets doped with alpha emitters ({sup 238}Pu and {sup 239}Pu) to quantify the impact of alpha irradiation on UO{sub 2} matrix alteration. Three batches of doped UO{sub 2} pellets with different alpha flux levels (3.30 x 10{sup 4}, 3.30 x 10{sup 5}, and 3.2 x 10{sup 6} {alpha} cm{sup -2} s{sup -1}) were studied. The results obtained in aerated and deaerated media immediately after sample annealing or interim storage in air provide a better understanding of the UO{sub 2} matrix alteration mechanisms under alpha irradiation. Interim storage in air of UO{sub 2} pellets doped with alpha emitters results in variations of the UO{sub 2} surface reactivity, which depends on the alpha particle flux at the interface and on the interim storage duration. The variation in the surface reactivity and the greater uranium release following interim storage cannot be attributed to the effect of alpha radiolysis in aerated media since the uranium release tends toward the same value after several leaching cycles for the doped UO{sub 2} pellet batches and spent fuel. Oxygen diffusion enhanced by alpha irradiation of the extreme surface layer and/or radiolysis of the air could account for the oxidation of the surface UO{sub 2} to UO{sub 2+x}. However, leaching experiments performed in deaerated media after annealing the samples and

Impacts of Model Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

Athalye, Rahul A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Sivaraman, Deepak [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Elliott, Douglas B. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Liu, Bing [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bartlett, Rosemarie [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-10-31

The U.S. Department of Energy (DOE) Building Energy Codes Program (BECP) periodically evaluates national and state-level impacts associated with energy codes in residential and commercial buildings. Pacific Northwest National Laboratory (PNNL), funded by DOE, conducted an assessment of the prospective impacts of national model building energy codes from 2010 through 2040. A previous PNNL study evaluated the impact of the Building Energy Codes Program; this study looked more broadly at overall code impacts. This report describes the methodology used for the assessment and presents the impacts in terms of energy savings, consumer cost savings, and reduced CO<sub>2sub> emissions at the state level and at aggregated levels. This analysis does not represent all potential savings from energy codes in the U.S. because it excludes several states which have codes which are fundamentally different from the national model energy codes or which do not have state-wide codes. Energy codes follow a three-phase cycle that starts with the development of a new model code, proceeds with the adoption of the new code by states and local jurisdictions, and finishes when buildings comply with the code. The development of new model code editions creates the potential for increased energy savings. After a new model code is adopted, potential savings are realized in the field when new buildings (or additions and alterations) are constructed to comply with the new code. Delayed adoption of a model code and incomplete compliance with the code’s requirements erode potential savings. The contributions of all three phases are crucial to the overall impact of codes, and are considered in this assessment.

Hermitian self-dual quasi-abelian codes

Directory of Open Access Journals (Sweden)

Herbert S. Palines

2017-12-01

Full Text Available Quasi-abelian codes constitute an important class of linear codes containing theoretically and practically interesting codes such as quasi-cyclic codes, abelian codes, and cyclic codes. In particular, the sub-class consisting of 1-generator quasi-abelian codes contains large families of good codes. Based on the well-known decomposition of quasi-abelian codes, the characterization and enumeration of Hermitian self-dual quasi-abelian codes are given. In the case of 1-generator quasi-abelian codes, we offer necessary and sufficient conditions for such codes to be Hermitian self-dual and give a formula for the number of these codes. In the case where the underlying groups are some $p$-groups, the actual number of resulting Hermitian self-dual quasi-abelian codes are determined.

Techno-economic study of CO{sub 2} capture from an existing coal-fired power plant: MEA scrubbing vs. O{sub 2}/CO{sub 2} recycle combustion

Energy Technology Data Exchange (ETDEWEB)

Singh, D; Croiset, E; Douglas, P L [Waterloo Univ., Dept. of Chemical Engineering, Waterloo, ON (Canada); Douglas, M A [Natural Resources Canada, CANMET Energy Technology Centre, Nepean, ON (Canada)

2003-11-01

The existing fleet of modern pulverised coal fired power plants represents an opportunity to achieve significant reductions in greenhouse gas emissions in the coming years providing that efficient and economical CO{sub 2} capture technologies are available for retrofit. One option is to separate CO{sub 2} from the products of combustion using conventional approaches such as amine scrubbing. An emerging alternative, commonly known as O{sub 2}/CO{sub 2} recycle combustion, involves burning the coal with oxygen in an atmosphere of recycled flue gas. Both approaches can be retrofitted to existing units, however they consume significant amounts of energy to capture, purify and compress the CO{sub 2} for subsequent sequestration. This paper presents a techno-economic comparison of the performance of the two approaches. The comparison was developed using the commercial process simulation packages, Hysys and Aspen Plus. The results show that both processes are expensive options to capture CO{sub 2} from coal power plants, however O{sub 2}/CO{sub 2} appears to be a more attractive retrofit than MEA scrubbing. The CO{sub 2} capture cost for the MEA case is USD 53/ton of CO{sub 2} avoided, which translates into 3.3 cent/kW h. For the O{sub 2}/CO{sub 2} case the CO{sub 2} capture cost is lower at USD 35/ton of CO{sub 2} avoided, which translates into 2.4 cent/kW h. These capture costs represent an approximate increase of 20-30% in current electricity prices. (Author)

Development of a tracer transport option for the NAPSAC fracture network computer code

International Nuclear Information System (INIS)

Herbert, A.W.

1990-06-01

The Napsac computer code predicts groundwater flow through fractured rock using a direct fracture network approach. This paper describes the development of a tracer transport algorithm for the NAPSAC code. A very efficient particle-following approach is used enabling tracer transport to be predicted through large fracture networks. The new algorithm is tested against three test examples. These demonstrations confirm the accuracy of the code for simple networks, where there is an analytical solution to the transport problem, and illustrates the use of the computer code on a more realistic problem. (author)

NASA Lewis Steady-State Heat Pipe Code Architecture

Science.gov (United States)

Mi, Ye; Tower, Leonard K.

2013-01-01

NASA Glenn Research Center (GRC) has developed the LERCHP code. The PC-based LERCHP code can be used to predict the steady-state performance of heat pipes, including the determination of operating temperature and operating limits which might be encountered under specified conditions. The code contains a vapor flow algorithm which incorporates vapor compressibility and axially varying heat input. For the liquid flow in the wick, Darcy s formula is employed. Thermal boundary conditions and geometric structures can be defined through an interactive input interface. A variety of fluid and material options as well as user defined options can be chosen for the working fluid, wick, and pipe materials. This report documents the current effort at GRC to update the LERCHP code for operating in a Microsoft Windows (Microsoft Corporation) environment. A detailed analysis of the model is presented. The programming architecture for the numerical calculations is explained and flowcharts of the key subroutines are given

Cost Implications of Uncertainty in CO{sub 2} Storage Resource Estimates: A Review

Energy Technology Data Exchange (ETDEWEB)

Anderson, Steven T., E-mail: sanderson@usgs.gov [National Center, U.S. Geological Survey (United States)

2017-04-15

Carbon capture from stationary sources and geologic storage of carbon dioxide (CO{sub 2}) is an important option to include in strategies to mitigate greenhouse gas emissions. However, the potential costs of commercial-scale CO{sub 2} storage are not well constrained, stemming from the inherent uncertainty in storage resource estimates coupled with a lack of detailed estimates of the infrastructure needed to access those resources. Storage resource estimates are highly dependent on storage efficiency values or storage coefficients, which are calculated based on ranges of uncertain geological and physical reservoir parameters. If dynamic factors (such as variability in storage efficiencies, pressure interference, and acceptable injection rates over time), reservoir pressure limitations, boundaries on migration of CO{sub 2}, consideration of closed or semi-closed saline reservoir systems, and other possible constraints on the technically accessible CO{sub 2} storage resource (TASR) are accounted for, it is likely that only a fraction of the TASR could be available without incurring significant additional costs. Although storage resource estimates typically assume that any issues with pressure buildup due to CO{sub 2} injection will be mitigated by reservoir pressure management, estimates of the costs of CO{sub 2} storage generally do not include the costs of active pressure management. Production of saline waters (brines) could be essential to increasing the dynamic storage capacity of most reservoirs, but including the costs of this critical method of reservoir pressure management could increase current estimates of the costs of CO{sub 2} storage by two times, or more. Even without considering the implications for reservoir pressure management, geologic uncertainty can significantly impact CO{sub 2} storage capacities and costs, and contribute to uncertainty in carbon capture and storage (CCS) systems. Given the current state of available information and the

The Aster code; Code Aster

Energy Technology Data Exchange (ETDEWEB)

Delbecq, J.M

1999-07-01

The Aster code is a 2D or 3D finite-element calculation code for structures developed by the R and D direction of Electricite de France (EdF). This dossier presents a complete overview of the characteristics and uses of the Aster code: introduction of version 4; the context of Aster (organisation of the code development, versions, systems and interfaces, development tools, quality assurance, independent validation); static mechanics (linear thermo-elasticity, Euler buckling, cables, Zarka-Casier method); non-linear mechanics (materials behaviour, big deformations, specific loads, unloading and loss of load proportionality indicators, global algorithm, contact and friction); rupture mechanics (G energy restitution level, restitution level in thermo-elasto-plasticity, 3D local energy restitution level, KI and KII stress intensity factors, calculation of limit loads for structures), specific treatments (fatigue, rupture, wear, error estimation); meshes and models (mesh generation, modeling, loads and boundary conditions, links between different modeling processes, resolution of linear systems, display of results etc..); vibration mechanics (modal and harmonic analysis, dynamics with shocks, direct transient dynamics, seismic analysis and aleatory dynamics, non-linear dynamics, dynamical sub-structuring); fluid-structure interactions (internal acoustics, mass, rigidity and damping); linear and non-linear thermal analysis; steels and metal industry (structure transformations); coupled problems (internal chaining, internal thermo-hydro-mechanical coupling, chaining with other codes); products and services. (J.S.)

Validation of the code ETOBOX/BOXER for UO2 LWR lattices based on the experiments TRX, BAPL-UO2 and other critical experiments

International Nuclear Information System (INIS)

Paratte, J.M.

1985-07-01

The EIR codes system for LWR arrays is based on cross sections taken out of ENDF/B-4 and ENDF/B-5 by the code ETOBOX. The calculation method for the arrays (code BOXER) and the cross sections as well were applied to the CSEWG benchmark experiments TRX-1 to 4 and BAPL-UO/sub 2/-1 to 3. The results are compared to the measured values and to some calculations of other institutions as well. This demonstrates that the deviations of the parameters calculated by BOXER are typical for the cross sections used. A large number of critical experiments were calculated using the measured material bucklings in order to bring to light possible trends in the calculation of the multiplication factor k/sub eff/. First it came out that the error bounds of B/sub m//sup 2/ evalu-ated in the measurements are often optimistic. Two-dimensional calculations improved the results of the cell calculations. With a mean scattering of 4 to 5 mk in the normal arrays, the multiplication factors calculated by BOXER are satisfactory. However one has to take into account a slight trend of k/sub eff/ to grow with the moderator to fuel ratio and the enrichment. (author)

Cost-effectiveness of public-health policy options in the presence of pretreatment NNRTI drug resistance in sub-Saharan Africa: a modelling study.

Science.gov (United States)

Phillips, Andrew N; Cambiano, Valentina; Nakagawa, Fumiyo; Revill, Paul; Jordan, Michael R; Hallett, Timothy B; Doherty, Meg; De Luca, Andrea; Lundgren, Jens D; Mhangara, Mutsa; Apollo, Tsitsi; Mellors, John; Nichols, Brooke; Parikh, Urvi; Pillay, Deenan; Rinke de Wit, Tobias; Sigaloff, Kim; Havlir, Diane; Kuritzkes, Daniel R; Pozniak, Anton; van de Vijver, David; Vitoria, Marco; Wainberg, Mark A; Raizes, Elliot; Bertagnolio, Silvia

2018-03-01

There is concern over increasing prevalence of non-nucleoside reverse-transcriptase inhibitor (NNRTI) resistance in people initiating antiretroviral therapy (ART) in low-income and middle-income countries. We assessed the effectiveness and cost-effectiveness of alternative public health responses in countries in sub-Saharan Africa where the prevalence of pretreatment drug resistance to NNRTIs is high. The HIV Synthesis Model is an individual-based simulation model of sexual HIV transmission, progression, and the effect of ART in adults, which is based on extensive published data sources and considers specific drugs and resistance mutations. We used this model to generate multiple setting scenarios mimicking those in sub-Saharan Africa and considered the prevalence of pretreatment NNRTI drug resistance in 2017. We then compared effectiveness and cost-effectiveness of alternative policy options. We took a 20 year time horizon, used a cost effectiveness threshold of US$500 per DALY averted, and discounted DALYs and costs at 3% per year. A transition to use of a dolutegravir as a first-line regimen in all new ART initiators is the option predicted to produce the most health benefits, resulting in a reduction of about 1 death per year per 100 people on ART over the next 20 years in a situation in which more than 10% of ART initiators have NNRTI resistance. The negative effect on population health of postponing the transition to dolutegravir increases substantially with higher prevalence of HIV drug resistance to NNRTI in ART initiators. Because of the reduced risk of resistance acquisition with dolutegravir-based regimens and reduced use of expensive second-line boosted protease inhibitor regimens, this policy option is also predicted to lead to a reduction of overall programme cost. A future transition from first-line regimens containing efavirenz to regimens containing dolutegravir formulations in adult ART initiators is predicted to be effective and cost-effective in

LiveCode mobile development

CERN Document Server

Lavieri, Edward D

2013-01-01

A practical guide written in a tutorial-style, ""LiveCode Mobile Development Hotshot"" walks you step-by-step through 10 individual projects. Every project is divided into sub tasks to make learning more organized and easy to follow along with explanations, diagrams, screenshots, and downloadable material.This book is great for anyone who wants to develop mobile applications using LiveCode. You should be familiar with LiveCode and have access to a smartphone. You are not expected to know how to create graphics or audio clips.

CANAL code

International Nuclear Information System (INIS)

Gara, P.; Martin, E.

1983-01-01

The CANAL code presented here optimizes a realistic iron free extraction channel which has to provide a given transversal magnetic field law in the median plane: the current bars may be curved, have finite lengths and cooling ducts and move in a restricted transversal area; terminal connectors may be added, images of the bars in pole pieces may be included. A special option optimizes a real set of circular coils [fr

MARMER, a flexible point-kernel shielding code

International Nuclear Information System (INIS)

Kloosterman, J.L.; Hoogenboom, J.E.

1990-01-01

A point-kernel shielding code entitled MARMER is described. It has several options with respect to geometry input, source description and detector point description which extend the flexibility and usefulness of the code, and which are especially useful in spent fuel shielding. MARMER has been validated using the TN12 spent fuel shipping cask benchmark. (author)

MARMER, a flexible point-kernel shielding code

Energy Technology Data Exchange (ETDEWEB)

Kloosterman, J.L.; Hoogenboom, J.E. (Interuniversitair Reactor Inst., Delft (Netherlands))

1990-01-01

A point-kernel shielding code entitled MARMER is described. It has several options with respect to geometry input, source description and detector point description which extend the flexibility and usefulness of the code, and which are especially useful in spent fuel shielding. MARMER has been validated using the TN12 spent fuel shipping cask benchmark. (author).

Metal ion displacements in noncentrosymmetric chalcogenides La{sub 3}Ga{sub 1.67}S{sub 7}, La{sub 3}Ag{sub 0.6}GaCh{sub 7} (Ch=S, Se), and La{sub 3}MGaSe{sub 7} (M=Zn, Cd)

Energy Technology Data Exchange (ETDEWEB)

Iyer, Abishek K. [Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada T6G2G2 (Canada); Yin, Wenlong [Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada T6G2G2 (Canada); Institute of Chemical Materials, China Academy of Engineering Physics, Mianyang 621900 (China); Rudyk, Brent W. [Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada T6G2G2 (Canada); Lin, Xinsong [Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada T6G2G2 (Canada); Centre for Oil Sands Sustainability, Northern Alberta Institute of Technology, Edmonton, Alberta, Canada T6N1E5 (Canada); Nilges, Tom [Department of Chemistry, Technical University of Munich, 85748 Garching b. München (Germany); Mar, Arthur, E-mail: arthur.mar@ualberta.ca [Department of Chemistry, University of Alberta, Edmonton, Alberta, Canada T6G2G2 (Canada)

2016-11-15

The quaternary Ga-containing chalcogenides La{sub 3}Ag{sub 0.6}GaS{sub 7}, La{sub 3}Ag{sub 0.6}GaSe{sub 7}, La{sub 3}ZnGaSe{sub 7}, and La{sub 3}CdGaSe{sub 7}, as well as the related ternary chalcogenide La{sub 3}Ga{sub 1.67}S{sub 7}, were prepared by reactions of the elements at 950 °C. They adopt noncentrosymmetric hexagonal structures (space group P6{sub 3}, Z=2) with cell parameters (a=10.2 Å, c=6.1 Å for the sulfides; a=10.6 Å, c=6.4 Å for the selenides) that are largely controlled by the geometrical requirements of one-dimensional stacks of Ga-centered tetrahedra separated by the La atoms. Among these compounds, which share the common formulation La{sub 3}M{sub 1–x}GaCh{sub 7} (M=Ga, Ag, Zn, Cd; Ch=S, Se), the M atoms occupy sites within a stacking of trigonal antiprisms formed by Ch atoms. The location of the M site varies between extremes with trigonal antiprismatic (CN6) and trigonal planar (CN3) geometry. Partial occupation of these sites and intermediate ones accounts for the considerable versatility of these structures and the occurrence of large metal displacement parameters. The site occupations can be understood in a simple way as being driven by the need to satisfy appropriate bond valence sums for both the M and Ch atoms. Band structure calculations rationalize the substoichiometry observed in the Ag-containing compounds (La{sub 3}Ag{sub 0.6}GaS{sub 7}, La{sub 3}Ag{sub 0.6}GaSe{sub 7}) as a response to overbonding. X-ray photoelectron spectroscopy supports the presence of monovalent Ag atoms in these compounds, which are not charge-balanced. - Graphical abstract: Partial occupation of metal atoms in multiple sites accounts for versatility in Ga-containing chalcogenides La{sub 3}M{sub 1–x}GaCh{sub 7} with noncentrosymmetric hexagonal structures. - Highlights: • La{sub 3}M{sub 1–x}GaCh{sub 7} (M =Ga, Ag, Zn, Cd; Ch =S, Se) adopt related hexagonal structures. • Large displacements of M atoms originate from partial occupation of multiple

[The QR code in society, economy and medicine--fields of application, options and chances].

Science.gov (United States)

Flaig, Benno; Parzeller, Markus

2011-01-01

2D codes like the QR Code ("Quick Response") are becoming more and more common in society and medicine. The application spectrum and benefits in medicine and other fields are described. 2D codes can be created free of charge on any computer with internet access without any previous knowledge. The codes can be easily used in publications, presentations, on business cards and posters. Editors choose between contact details, text or a hyperlink as information behind the code. At expert conferences, linkage by QR Code allows the audience to download presentations and posters quickly. The documents obtained can then be saved, printed, processed etc. Fast access to stored data in the internet makes it possible to integrate additional and explanatory multilingual videos into medical posters. In this context, a combination of different technologies (printed handout, QR Code and screen) may be reasonable.

SARP-II: Safeguards Accounting and Reports Program, Revised

International Nuclear Information System (INIS)

Kempf, C.R.

1994-01-01

A computer code, SARP (Safeguards Accounting and Reports Program) which will generate and maintain at-facility safeguards accounting records, and generate IAEA safeguards reports based on accounting data input by the user, was completed in 1990 by the Safeguards, Safety, and Nonproliferation Division (formerly the Technical Support Organization) at Brookhaven National Laboratory as a task under the US Program of Technical Support to IAEA safeguards. The code was based on a State System of Accounting for and Control of Nuclear Material (SSAC) for off-load refueled power reactor facilities, with model facility and safeguards accounting regime as described in IAEA Safeguards Publication STR-165. Since 1990, improvements in computing capabilities and comments and suggestions from users engendered revision of the original code. The result is an updated, revised version called SARP-II which is discussed in this report

Cyclotron resonance and De Haas-Van Alphen effect in (BEDT-TTF) sub 8 Hg sub 4 Cl sub 1 sub 2 (C sub 6 H sub 5 Cl) sub 2 organic conductor

CERN Document Server

Voskobojnikov, I B; Samarin, N A; Cluchanko, N E; Lyubovskaya, R N; Moshchalkov, V V

2002-01-01

Within 0.33-1.44 K temperature range at B <= 50 T magnetic field values one measured the De Haas-Van Alphen effect for (BEDT-TTF) sub 8 Hg sub 4 Cl sub 1 sub 2 (C sub 6 H sub 5 Cl) sub 2 organic quasi-two-dimensional conductor. Analysis of quantum oscillations with regard to data on cyclotron resonance derived for 40-120 GHz frequency interval enabled to determine that a complex spectrum of quantum oscillations was formed by alpha approx 256 T and beta approx 670-610 T fundamental frequencies as well as, by combination and multiple frequencies. It is shown that nature of temperature rearrangement of oscillation spectrum may be interpreted in terms of model taking account of occurrence of magnetic phase transition at T sub c approx 0.9 K and proximity of a fundamental frequency with m* = 1.48m sub 0 efficient mass to the spin dumping condition

For the last time: stock options are an expense.

Science.gov (United States)

Bodie, Zvi; Kaplan, Robert S; Merton, Robert C

2003-03-01

Should stock options be recorded as an expense on a company's income statement and balance sheet, or should they remain where they are, relegated to footnotes? The extraordinary boom in share prices during the Internet bubble made critics of option expensing look like spoilsports. But since the crash, the debate has returned with a vengeance. And no wonder: The authors believe the case for expensing options is overwhelming. In this article, Nobel Iaureate Robert Merton, one of the inventors of the Black-Scholes option-pricing model; his coauthor on the classic textbook Finance, Zvi Bodie; and Robert Kaplan, creator of the Balanced Scorecard, examine and dismiss the principal claims put forward by those who continue to oppose options expensing. They demonstrate that stock-option grants do indeed have real cash-flow implications that need to be reported. They show that effective ways certainly exist to quantify those implications. They detail the distortions that relegating stock-option accounting to footnotes creates. And they show why reporting option costs should in no way hamper young companies in their efforts to provide incentives. Options are indeed a powerful incentive, the authors agree, and failing to record a transaction that creates such powerful effects is economically indefensible. Worse, it encourages companies to favor options over alternative incentive systems. It is not the proper role of accounting standards, the authors argue, to distort executive and employee compensation by subsidizing one particular form of compensation and no other. Companies should choose compensation methods according to their economic benefits--not the way they are reported.

A first principles study of the electronic structure, elastic and thermal properties of UB{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Jossou, Ericmoore, E-mail: ericmoore.jossou@usask.ca [Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, S7N 5A9, Saskatchewan (Canada); Malakkal, Linu [Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, S7N 5A9, Saskatchewan (Canada); Szpunar, Barbara; Oladimeji, Dotun [Department of Physics and Engineering Physics, College of Art and Science, University of Saskatchewan, 116 Science Place, Saskatoon, S7N 5E2, Saskatchewan (Canada); Szpunar, Jerzy A. [Department of Mechanical Engineering, College of Engineering, University of Saskatchewan, 57 Campus Drive, Saskatoon, S7N 5A9, Saskatchewan (Canada)

2017-07-15

Uranium diboride (UB{sub 2}) has been widely deployed for refractory use and is a proposed material for Accident Tolerant Fuel (ATF) due to its high thermal conductivity. However, the applicability of UB{sub 2} towards high temperature usage in a nuclear reactor requires the need to investigate the thermomechanical properties, and recent studies have failed in highlighting applicable properties. In this work, we present an in-depth theoretical outlook of the structural and thermophysical properties of UB{sub 2}, including but not limited to elastic, electronic and thermal transport properties. These calculations were performed within the framework of Density Functional Theory (DFT) + U approach, using Quantum ESPRESSO (QE) code considering the addition of Coulomb correlations on the uranium atom. The phonon spectra and elastic constant analysis show the dynamic and mechanical stability of UB{sub 2} structure respectively. The electronic structure of UB{sub 2} was investigated using full potential linear augmented plane waves plus local orbitals method (FP-LAPW+lo) as implemented in WIEN2k code. The absence of a band gap in the total and partial density of states confirms the metallic nature while the valence electron density plot reveals the presence of covalent bond between adjacent B-B atoms. We predicted the lattice thermal conductivity (k{sub L}) by solving Boltzmann Transport Equation (BTE) using ShengBTE. The second order harmonic and third-order anharmonic interatomic force constants required as input to ShengBTE was calculated using the Density-functional perturbation theory (DFPT). However, we predicted the electronic thermal conductivity (k{sub el}) using Wiedemann-Franz law as implemented in Boltztrap code. We also show that the sound velocity along ‘a’ and ‘c’ axes exhibit high anisotropy, which accounts for the anisotropic thermal conductivity of UB{sub 2}. - Highlights: •Prediction of electronic structure and thermophysical properties of UB{sub

Report on SNL RCBC control options

Energy Technology Data Exchange (ETDEWEB)

Ponciroli, R. [Argonne National Lab. (ANL), Argonne, IL (United States); Vilim, R. B. [Argonne National Lab. (ANL), Argonne, IL (United States)

2017-09-30

The attractive performance of the S-CO<sub>2sub> recompression cycle arises from the thermo-physical properties of carbon dioxide near the critical point. However, to ensure efficient operation of the cycle near the critical point, precise control of the heat removal rate by the Printed Circuit Heat Exchanger (PCHE) upstream of the main compressor is required. Accomplishing this task is not trivial because of the large variations in fluid properties with respect to temperature and pressure near the critical point. The use of a model-based approach for the design of a robust feedback regulator is being investigated to achieve acceptable control of heat removal rate at different operating conditions. A first step in this procedure is the development of a dynamic model of the heat exchanger. In this work, a one-dimensional (1-D) control-oriented model of the PCHE was developed using the General Plant Analyzer and System Simulator (GPASS) code. GPASS is a transient simulation code that supports analysis and control of power conversion cycles based on the S-CO<sub>2sub> Brayton cycle. This modeling capability was used this fiscal year to analyze experiment data obtained from the heat exchanger in the SNL recompression Brayton cycle. The analysis suggested that the error in the water flowrate measurement was greater than required for achieving precise control of heat removal rate. Accordingly, a new water flowmeter was installed, significantly improving the quality of the measurement. Comparison of heat exchanger measurements in subsequent experiments with code simulations yielded good agreement establishing a reliable basis for the use of the GPASS PCHE model for future development of a model-based feedback controller.

American options under stochastic volatility

NARCIS (Netherlands)

Chockalingam, A.; Muthuraman, K.

2011-01-01

The problem of pricing an American option written on an underlying asset with constant price volatility has been studied extensively in literature. Real-world data, however, demonstrate that volatility is not constant, and stochastic volatility models are used to account for dynamic volatility

Option generation in decision making: ideation beyond memory retrieval.

Science.gov (United States)

Del Missier, Fabio; Visentini, Mimì; Mäntylä, Timo

2014-01-01

According to prescriptive decision theories, the generation of options for choice is a central aspect of decision making. A too narrow representation of the problem may indeed limit the opportunity to evaluate promising options. However, despite the theoretical and applied significance of this topic, the cognitive processes underlying option generation are still unclear. In particular, while a cued recall account of option generation emphasizes the role of memory and executive control, other theoretical proposals stress the importance of ideation processes based on various search and thinking processes. Unfortunately, relevant behavioral evidence on the cognitive processes underlying option generation is scattered and inconclusive. In order to reach a better understanding, we carried out an individual-differences study employing a wide array of cognitive predictors, including measures of episodic memory, semantic memory, cognitive control, and ideation fluency. The criterion tasks consisted of three different poorly-structured decision-making scenarios, and the participants were asked to generate options to solve these problems. The main criterion variable of the study was the number of valid options generated, but also the diversity and the quality of generated options were examined. The results showed that option generation fluency and diversity in the context of ill-structured decision making are supported by ideation ability even after taking into account the effects of individual differences in several other aspects of cognitive functioning. Thus, ideation processes, possibly supported by search and thinking processes, seem to contribute to option generation beyond basic associative memory retrieval. The findings of the study also indicate that generating more options may have multifaceted consequences for choice, increasing the quality of the best option generated but decreasing the mean quality of the options in the generated set.

Option generation in decision making: Ideation beyond memory retrieval

Directory of Open Access Journals (Sweden)

Fabio eDel Missier

2015-01-01

Full Text Available According to prescriptive decision theories, the generation of options for choice is a central aspect of decision making. A too narrow representation of the problem may indeed limit the opportunity to evaluate promising options. However, despite the theoretical and applied significance of this topic, the cognitive processes underlying option generation are still unclear. In particular, while a cued recall account of option generation emphasizes the role of memory and executive control, other theoretical proposals stress the importance of ideation processes based on various search and thinking processes. Unfortunately, relevant behavioral evidence on the cognitive processes underlying option generation is scattered and inconclusive. In order to reach a better understanding, we carried out an individual-differences study employing a wide array of cognitive predictors, including measures of episodic memory, semantic memory, cognitive control, and ideation fluency. The criterion tasks consisted of three different poorly-structured decision-making scenarios, and the participants were asked to generate options to solve these problems. The main criterion variable of the study was the number of valid options generated, but also the diversity and the quality of generated options were examined. The results showed that option generation fluency and diversity in the context of ill-structured decision making are supported by ideation ability even after taking into account the effects of individual differences in several other aspects of cognitive functioning. Thus, ideation processes, possibly supported by search and thinking processes, seem to contribute to option generation beyond basic associative memory retrieval. The findings of the study also indicate that generating more options may have multifaceted consequences for choice, increasing the quality of the best option generated but decreasing the mean quality of the options in the generated set.

CALIOP: a multichannel design code for gas-cooled fast reactors. Code description and user's guide

International Nuclear Information System (INIS)

Thompson, W.I.

1980-10-01

CALIOP is a design code for fluid-cooled reactors composed of parallel fuel tubes in hexagonal or cylindrical ducts. It may be used with gaseous or liquid coolants. It has been used chiefly for design of a helium-cooled fast breeder reactor and has built-in cross section information to permit calculations of fuel loading, breeding ratio, and doubling time. Optional cross-section input allows the code to be used with moderated cores and with other fuels

Accounting for the distributional impacts of policy in the green accounts

NARCIS (Netherlands)

Horan, R.D.; Hrubovcak, J.; Shortle, J.S.; Bulte, E.H.

2000-01-01

Green income accounting models are designed to appropriately value changes in a country's natural resource (natural capital) base. However, green NNP is useful as a guide for domestic and international policy only to the extent that it accurately reflects the economic goals and policy options of

Estimated Critical Conditions for UO(Sub 2)F(Sub 2)-H(Sub 2)O Systems in Fully Water-Reflected Spherical Geometry

Energy Technology Data Exchange (ETDEWEB)

Jordan, W.C.

1992-01-01

The purpose of this report is to document reference calculations performed using the SCALE-4.0 code system to determine the critical parameters of UO{sub 2}F{sub 2}-H{sub 2}O spheres. The calculations are an extension of those documented in ORNL/CSD/TM-284. Specifically, the data for low-enriched UO{sub 2}F{sub 2}-H{sub 2}O spheres have been extended to highly enriched uranium. These calculations, together with those reported in ORNL/CSD/TM-284, provide a consistent set of critical parameters (k{sub {infinity}}, volume, mass, mass of water) for UO{sub 2}F{sub 2} and water over the full range of enrichment and moderation ratio.

Estimated critical conditions for UO{sub 2}F{sub 2}--H{sub 2}O systems in fully water-reflected spherical geometry

Energy Technology Data Exchange (ETDEWEB)

Jordan, W.C.; Turner, J.C.

1992-12-01

The purpose of this report is to document reference calculations performed using the SCALE-4.0 code system to determine the critical parameters of UO{sub 2}F{sub 2}-H{sub 2}O spheres. The calculations are an extension of those documented in ORNL/CSD/TM-284. Specifically, the data for low-enriched UO{sub 2}F{sub 2}-H{sub 2}O spheres have been extended to highly enriched uranium. These calculations, together with those reported in ORNL/CSD/TM-284, provide a consistent set of critical parameters (k{sub {infinity}}, volume, mass, mass of water) for UO{sub 2}F{sub 2} and water over the full range of enrichment and moderation ratio.

The echo-enabled harmonic generation options for FLASH II

International Nuclear Information System (INIS)

Deng, Haixiao; Decking, Winfried; Faatz, Bart

2011-03-01

FLASH II is an upgrade to the existing free electron laser (FEL) FLASH. The echo-enabled harmonic generation (EEHG) scheme is proposed to be a potential seeding option of FLASH II. In this paper, the possibility of EEHG operation of FLASH II is investigated for the first time. With a combination of existing numerical codes, i.e. a laser-beam interaction code in an undulator (LBICU), a beam tracking code in a chicane (ELEGANT) and an universal FEL simulating code (GENESIS), the effects of beam energy chirp and coherent synchrotron radiation (CSR) on EEHG operation are studied as well. In addition, several interesting issues concerning EEHG simulation are discussed. (orig.)

CRUCIB: an axisymmetric convection code

International Nuclear Information System (INIS)

Bertram, L.A.

1975-03-01

The CRUCIB code was written in support of an experimental program aimed at measurement of thermal diffusivities of refractory liquids. Precise values of diffusivity are necessary to realistic analysis of reactor safety problems, nuclear waste disposal procedures, and fundamental metal forming processes. The code calculates the axisymmetric transient convective motions produced in a right circular cylindrical crucible, which is surface heated by an annular heat pulse. Emphasis of this report is placed on the input-output options of the CRUCIB code, which are tailored to assess the importance of the convective heat transfer in determining the surface temperature distribution. Use is limited to Prandtl numbers less than unity; larger values can be accommodated by replacement of a single block of the code, if desired. (U.S.)

An independent assessment of CO{sub 2} capture research needs

Energy Technology Data Exchange (ETDEWEB)

St. John, B. [INTECH, Inc., Gaithersburg, MD (United States)

1993-12-31

The United States generates on the order of five billion metric tons of CO{sub 2} annually. Of this, approximately 1.8 billion metric tons is from electric utilities. Other industrial sources of CO{sub 2}, such as cement plants, coke ovens, ammonia plants, oil refineries, etc. are small relative to the emissions from power plants. The majority of the emissions from U.S. electric utilities are from coal-fired power plants. Thus, any large scale program to control CO{sub 2} emissions needs to include abatement of CO{sub 2} from power plants. Currently, there are very few proven options to mitigate CO{sub 2} emissions: (1) Improve thermal efficiency, thereby decreasing the amount of CO{sub 2} generated per unit of output. (2) Improve the efficiency of end use. (3) Convert to lower carbon fuels or non-fossil energy sources. (4) Plant trees to offset CO{sub 2} emitted. (5) Produce a concentrated CO{sub 2} stream for utilization or disposal. The first four options are well known and are being actively pursued at the present time. This paper examines the last option from the perspective that the gap between what is needed and what is available defines the research and development opportunities.

Modeling approach for annular-fuel elements using the ASSERT-PV subchannel code

International Nuclear Information System (INIS)

Dominguez, A.N.; Rao, Y.

2012-01-01

The internally and externally cooled annular fuel (hereafter called annular fuel) is under consideration for a new high burn-up fuel bundle design in Atomic Energy of Canada Limited (AECL) for its current, and its Generation IV reactor. An assessment of different options to model a bundle fuelled with annular fuel elements is presented. Two options are discussed: 1) Modify the subchannel code ASSERT-PV to handle multiple types of elements in the same bundle, and 2) coupling ASSERT-PV with an external application. Based on this assessment, the selected option is to couple ASSERT-PV with the thermalhydraulic system code CATHENA. (author)

On the energy distribution profile of interface states obtained by taking into account of series resistance in Al/TiO{sub 2}/p-Si (MIS) structures

Energy Technology Data Exchange (ETDEWEB)

Pakma, O., E-mail: osman@pakma.co [Department of Physics, Faculty of Sciences and Arts, Batman University, Batman (Turkey); Serin, N.; Serin, T. [Department of Engineering Physics, Faculty of Engineering, Ankara University, 06100 Tandogan, Ankara (Turkey); Altindal, S. [Physics Department, Faculty of Arts and Sciences, Gazi University, Teknikokullar, 06500 Ankara (Turkey)

2011-02-15

The energy distribution profile of the interface states (N{sub ss}) of Al/TiO{sub 2}/p-Si (MIS) structures prepared using the sol-gel method was obtained from the forward bias current-voltage (I-V) characteristics by taking into account both the bias dependence of the effective barrier height ({phi}{sub e}) and series resistance (R{sub s}) at room temperature. The main electrical parameters of the MIS structure such as ideality factor (n), zero-bias barrier height ({phi}{sub b0}) and average series resistance values were found to be 1.69, 0.519 eV and 659 {Omega}, respectively. This high value of n was attributed to the presence of an interfacial insulator layer at the Al/p-Si interface and the density of interface states (N{sub ss}) localized at the Si/TiO{sub 2} interface. The values of N{sub ss} localized at the Si/TiO{sub 2} interface were found with and without the R{sub s} at 0.25-E{sub v} in the range between 8.4x10{sup 13} and 4.9x10{sup 13} eV{sup -1} cm{sup -2}. In addition, the frequency dependence of capacitance-voltage (C-V) and conductance-voltage (G/{omega}-V) characteristics of the structures have been investigated by taking into account the effect of N{sub ss} and R{sub s} at room temperature. It can be found out that the measured C and G/{omega} are strongly dependent on bias voltage and frequency. -- Research highlights: {yields}We successfully fabricated Al/TiO{sub 2}/p-Si device with interlayer by a sol-gel method. The facts: (i) that the technology of the fabrication of a Al/TiO{sub 2}/p-Si MIS structure much simpler and economical than that for the Si p-n junction and (b) the main advantages of TiO{sub 2} films are low densities of the surface states when compared to SiO{sub 2}.

An Integrated Approach for Characterization of Uncertainty in Complex Best Estimate Safety Assessment

International Nuclear Information System (INIS)

Pourgol-Mohamad, Mohammad; Modarres, Mohammad; Mosleh, Ali

2013-01-01

This paper discusses an approach called Integrated Methodology for Thermal-Hydraulics Uncertainty Analysis (IMTHUA) to characterize and integrate a wide range of uncertainties associated with the best estimate models and complex system codes used for nuclear power plant safety analyses. Examples of applications include complex thermal hydraulic and fire analysis codes. In identifying and assessing uncertainties, the proposed methodology treats the complex code as a 'white box', thus explicitly treating internal sub-model uncertainties in addition to the uncertainties related to the inputs to the code. The methodology accounts for uncertainties related to experimental data used to develop such sub-models, and efficiently propagates all uncertainties during best estimate calculations. Uncertainties are formally analyzed and probabilistically treated using a Bayesian inference framework. This comprehensive approach presents the results in a form usable in most other safety analyses such as the probabilistic safety assessment. The code output results are further updated through additional Bayesian inference using any available experimental data, for example from thermal hydraulic integral test facilities. The approach includes provisions to account for uncertainties associated with user-specified options, for example for choices among alternative sub-models, or among several different correlations. Complex time-dependent best-estimate calculations are computationally intense. The paper presents approaches to minimize computational intensity during the uncertainty propagation. Finally, the paper will report effectiveness and practicality of the methodology with two applications to a complex thermal-hydraulics system code as well as a complex fire simulation code. In case of multiple alternative models, several techniques, including dynamic model switching, user-controlled model selection, and model mixing, are discussed. (authors)

Magnetism of CuCl{sub 2}·2D{sub 2}O and CuCl{sub 2}·2H{sub 2}O, and of CuBr{sub 2}·6H{sub 2}O

Energy Technology Data Exchange (ETDEWEB)

DeFotis, G.C., E-mail: gxdefo@wm.edu [Department of Chemistry, College of William and Mary, Williamsburg, VA 23187 (United States); Hampton, A.S.; Van Dongen, M.J.; Komatsu, C.H.; Benday, N.S.; Davis, C.M. [Department of Chemistry, College of William and Mary, Williamsburg, VA 23187 (United States); Hays, K.; Wagner, M.J. [Department of Chemistry, George Washington University, Washington, D.C. 20052 (United States)

2017-07-15

Highlights: • CuCl{sub 2}·2D{sub 2}O is examined magnetically and compared with CuCl{sub 2}·2H{sub 2}O. • Slightly lower magnetic characteristic temperatures occur for deuterated dihydrate. • The new compound CuBr{sub 2}·6H{sub 2}O is examined magnetically. • Unexpected relationships appears between magnetic behaviors of CuBr{sub 2}·6H{sub 2}O and CuBr{sub 2}. • Two alternative monoclinic unit cells can account for diffraction data on CuBr{sub 2}·6H{sub 2}O. - Abstract: The magnetic properties of little examined CuCl{sub 2}·2D{sub 2}O are studied and compared with those of CuCl{sub 2}·2H{sub 2}O. New CuBr{sub 2}·6H{sub 2}O is also examined. Susceptibility maxima appear for chlorides at 5.35 and 5.50 K, in the above order, with estimated antiferromagnetic ordering at 4.15 and 4.25 K. Curie-Weiss fits yield g of 2.210 and 2.205, and Weiss θ of −6.0 and −4.7 K, respectively, in χ{sub M} = C/(T − θ). One-dimensional Heisenberg model fits to susceptibilities, including interchain exchange in a mean-field approximation, are performed. Interchain exchange is significant but much weaker than intrachain. The bromide hexahydrate strongly differs magnetically from any chloride hydrate, but exhibits notable similarities and differences compared to previously studied CuBr{sub 2}. A broad susceptibility maximum occurs near 218 K, only 4% lower than for CuBr{sub 2}, but with almost twice the magnitude. Powder X-ray diffraction data for CuBr{sub 2}·6H{sub 2}O may be best accounted for by a monoclinic unit cell that is metrically orthorhombic. The volume per formula unit is consistent with trends in metal ionic radii. However, an alternative monoclinic cell with 5% smaller volume more readily rationalizes the magnetism.

KAMCCO, a reactor physics Monte Carlo neutron transport code

International Nuclear Information System (INIS)

Arnecke, G.; Borgwaldt, H.; Brandl, V.; Lalovic, M.

1976-06-01

KAMCCO is a 3-dimensional reactor Monte Carlo code for fast neutron physics problems. Two options are available for the solution of 1) the inhomogeneous time-dependent neutron transport equation (census time scheme), and 2) the homogeneous static neutron transport equation (generation cycle scheme). The user defines the desired output, e.g. estimates of reaction rates or neutron flux integrated over specified volumes in phase space and time intervals. Such primary quantities can be arbitrarily combined, also ratios of these quantities can be estimated with their errors. The Monte Carlo techniques are mostly analogue (exceptions: Importance sampling for collision processes, ELP/MELP, Russian roulette and splitting). Estimates are obtained from the collision and track length estimators. Elastic scattering takes into account first order anisotropy in the center of mass system. Inelastic scattering is processed via the evaporation model or via the excitation of discrete levels. For the calculation of cross sections, the energy is treated as a continuous variable. They are computed by a) linear interpolation, b) from optionally Doppler broadened single level Breit-Wigner resonances or c) from probability tables (in the region of statistically distributed resonances). (orig.) [de

Electronic structure of crystalline uranium nitrides UN, U{sub 2}N{sub 3} and UN{sub 2}: LCAO calculations with the basis set optimization

Energy Technology Data Exchange (ETDEWEB)

Evarestov, R A; Panin, A I; Bandura, A V; Losev, M V [Department of Quantum Chemistry, St. Petersburg State University, University Prospect 26, Stary Peterghof, St. Petersburg, 198504 (Russian Federation)], E-mail: re1973@re1973.spb.edu

2008-06-01

The results of LCAO DFT calculations of lattice parameters, cohesive energy and bulk modulus of the crystalline uranium nitrides UN, U{sub 2}N{sub 3} and UN{sub 2} are presented and discussed. The LCAO computer codes Gaussian03 and Crystal06 are applied. The calculations are made with the uranium atom relativistic effective small core potential by Stuttgart-Cologne group (60 electrons in the core). The calculations include the U atom basis set optimization. Powell, Hooke-Jeeves, conjugated gradient and Box methods are implemented in the author's optimization package, being external to the codes for molecular and periodic calculations. The basis set optimization in LCAO calculations improves the agreement of the lattice parameter and bulk modulus of UN crystal with the experimental data, the change of the cohesive energy due to the optimization is small. The mixed metallic-covalent chemical bonding is found both in LCAO calculations of UN and U{sub 2}N{sub 3} crystals; UN{sub 2} crystal has the semiconducting nature.

Development of mathematical model of H{sub 2}O-HNO{sub 3}-UO{sub 2}(NO{sub 3}){sub 2}-TBP-Diluent System

Energy Technology Data Exchange (ETDEWEB)

Ochkin, A.; Gladilov, D.; Nekhaevskiy, S.; Merkushkin, A. [D. Mendeleev University of Chemical Technology of Russia, 9 Miusskay Sqr., Moscow, 125047 (Russian Federation)

2016-07-01

The nuclear fuel reprocessing is based on the PUREX process. Usually 30% TBP in hydrocarbon diluents is applied, then the composition of the organic phase can be expressed as H{sub 2}O-HNO{sub 3}-UO{sub 2}(NO{sub 3}){sub 2}-Pu(NO{sub 3}){sub 4}-TBP-diluent. The mathematical model of H{sub 2}O-HNO{sub 3}-UO{sub 2}(NO{sub 3}){sub 2}-TBP-dodecane system has been elaborated. Mole fractions and volume ones and rational activity coefficients have been used in order to create the system of equations on the base of mass action law. The method for calculating activity coefficients was provided. The formation constants of uranyl nitrate di-solvate and mono-solvate and di-solvate of acid have been determined. Interaction between uranyl nitrate di-solvate and dodecane and between TBP and dodecane was taken into account. Activity coefficients of nitric acid and uranyl nitrate in mixed solutions were considered. Errors of adequacy have been determined for the systems containing 30% and 12% TBP concentrations.

An upgraded version of the nucleon meson transport code: NMTC/JAERI97

Energy Technology Data Exchange (ETDEWEB)

Takada, Hiroshi [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment; Yoshizawa, Nobuaki; Kosako, Kazuaki; Ishibashi, Kenji

1998-02-01

The nucleon-meson transport code NMTC/JAERI is upgraded to NMTC/JAERI97 which has new features not only in physics model and nuclear data but also in computational procedure. NMTC/JAERI97 implements the following two new physics models: an intranuclear cascade model taking account of the in-medium nuclear effects and the preequilibrium calculation model based on the exciton one. For treating the nucleon transport process more accurately, the nucleon-nucleus cross sections are revised to those derived by the systematics of Pearlstein. Moreover, the level density parameter derived by Ignatyuk is included as a new option for particle evaporation calculation. Other than those physical aspects, a new geometry package based on the Combinatorial Geometry with multi-array system and the importance sampling technique are implemented in the code. Tally function is also employed for obtaining such physical quantities as neutron energy spectra, heat deposition and nuclide yield without editing a history file. The resultant NMTC/JAERI97 is tuned to be executed on the UNIX system. This paper explains about the function, physics models and geometry model adopted in NMTC/JAERI97 and guides how to use the code. (author)

SSS: A code for computing one dimensional shock and detonation wave propagation

International Nuclear Information System (INIS)

Sun Chengwei

1986-01-01

The one-dimensional hydrodynamic code SSS for shock and detonation wave propagation in inert and reactive media is described. The elastic-plastic-hydrodynamic model and four burn techniques (the Arrhenius law, C-J volume, sharp shock and Forest Fire) are used. There are HOM and JWL options for the state equation of detonation products. Comparing with the SIN code published by LANL, the SSS code has several new options: laser effects, blast waves, diverging and instantaneous detonation waves with arbitrary initiation positions. Two examples are given to compare the SSS and SIN calculations with the experimental data

Peru : Accounting and Auditing

OpenAIRE

World Bank

2004-01-01

The report provides an assessment of accounting, financial reporting, and auditing practices within the corporate sector in Peru, using International Financial Reporting Standards (IFRS), and International Standards on Auditing (ISA) as benchmarks, drawing on international experience and best practices in that field. This Report on the Observance of Standards and Codes (ROSC) Accounting & ...

ACFAC: a cash flow analysis code for estimating product price from an industrial operation

International Nuclear Information System (INIS)

Delene, J.G.

1980-04-01

A computer code is presented which uses a discountted cash flow methodology to obtain an average product price for an industtrial process. The general discounted cash flow method is discussed. Special code options include multiple treatments of interest during construction and other preoperational costs, investment tax credits, and different methods for tax depreciation of capital assets. Two options for allocating the cost of plant decommissioning are available. The FORTRAN code listing and the computer output for a sample problem are included

Health impact assessment as an accountability mechanism for the International Monetary Fund: the case of sub-Saharan Africa.

Science.gov (United States)

O'Keefe, Eileen; Scott-Samuel, Alex

2010-01-01

Health impact assessment (HIA) is both an effective tool for promoting healthy public policies and one that has the potential to help hold accountable for their actions those who create unhealthy public policies. This article identifies some of the issues that arise in considering the application of HIA to the operation of the International Monetary Fund (IMF), especially in the context of sub-Saharan Africa. The authors do this in the belief that the IMF's lending conditionalities and macroeconomic policies constitute an important social determinant of health. The recent report of the Commission on Social Determinants of Health has created helpful and timely policy space for the development of a health equity- and human rights-oriented accountability framework for the IMF.

Exposure calculation code module for reactor core analysis: BURNER

Energy Technology Data Exchange (ETDEWEB)

Vondy, D.R.; Cunningham, G.W.

1979-02-01

The code module BURNER for nuclear reactor exposure calculations is presented. The computer requirements are shown, as are the reference data and interface data file requirements, and the programmed equations and procedure of calculation are described. The operating history of a reactor is followed over the period between solutions of the space, energy neutronics problem. The end-of-period nuclide concentrations are determined given the necessary information. A steady state, continuous fueling model is treated in addition to the usual fixed fuel model. The control options provide flexibility to select among an unusually wide variety of programmed procedures. The code also provides user option to make a number of auxiliary calculations and print such information as the local gamma source, cumulative exposure, and a fine scale power density distribution in a selected zone. The code is used locally in a system for computation which contains the VENTURE diffusion theory neutronics code and other modules.

Exposure calculation code module for reactor core analysis: BURNER

International Nuclear Information System (INIS)

Vondy, D.R.; Cunningham, G.W.

1979-02-01

The code module BURNER for nuclear reactor exposure calculations is presented. The computer requirements are shown, as are the reference data and interface data file requirements, and the programmed equations and procedure of calculation are described. The operating history of a reactor is followed over the period between solutions of the space, energy neutronics problem. The end-of-period nuclide concentrations are determined given the necessary information. A steady state, continuous fueling model is treated in addition to the usual fixed fuel model. The control options provide flexibility to select among an unusually wide variety of programmed procedures. The code also provides user option to make a number of auxiliary calculations and print such information as the local gamma source, cumulative exposure, and a fine scale power density distribution in a selected zone. The code is used locally in a system for computation which contains the VENTURE diffusion theory neutronics code and other modules

Fossil Fuel (CO<sub>2sub>) Emission Verification Capability07-ERD-064Final Report

Energy Technology Data Exchange (ETDEWEB)

Guilderson, T. P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Cameron-Smith, P. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lucas, D. D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2011-04-26

This work focused exclusively on designing a system for California as a test-bed. Fossil fuel CO<sub>2sub> emissions account for ~96% of the total California anthropogenic CO<sub>2sub> emissions (CEC GHG Inventory, 2006).

The Real Options Attached to an Investment Project

Directory of Open Access Journals (Sweden)

Mihai-Cristian DINICĂ

2011-12-01

Full Text Available The real options capture the importance of the managerial team’s role in creating value through investment projects. The investments in real assets have a set of options that managers can exercise during the period of the project to increase the value of the assets or to limit the eventual losses. This options have their own value.The traditional methods for investment project evaluatioan, based on discounted cash flows, have some major disadvantages: they assume the irreversibility of a decision, do not take into account the interactions between decisions in several periods and treat the investment as pasive. The evaluation using real options undertake this disadvantage. The paper shows the main types of real options, together with their elements and captures the impact of these options on the value of the investment. The main two models used to evaluate real options, the binomial model and Black-Scholes model, are explained and used to compute the value of real options attached to an investment project.

CO{sub 2} separation

Energy Technology Data Exchange (ETDEWEB)

Hakuta, Toshikatu [National Inst. of Materials and Chemical Research, Ibaraki (Japan)

1993-12-31

The climate change induced by CO{sub 2} and other greenhouse gases is probably the most serious environmental threat that mankind has ever experienced. Nowadays fossil fuels occupy the majority of the world commercial energy supply. Most nations will be dependent on fossil fuels even in the first half of the next century. Around 30 % of CO{sub 2} in the world is emitted from thermal power plants. Recovering CO{sub 2} from energy conversion processes and storing it outside the atmosphere is a promising option for the mitigation of global warming. CO{sub 2} fixation and storage include CO{sub 2} disposal into oceans and underground, and utilization of CO{sub 2}. CO{sub 2} separation process will be used in any CO{sub 2} storage system, and is estimated to consume almost half the energy of the total system. Research and development of highly efficient CO{sub 2} separation process is most important from the viewpoint of practical application of CO{sub 2} fixation system.

A general concurrent algorithm for plasma particle-in-cell simulation codes

International Nuclear Information System (INIS)

Liewer, P.C.; Decyk, V.K.

1989-01-01

We have developed a new algorithm for implementing plasma particle-in-cell (PIC) simulation codes on concurrent processors with distributed memory. This algorithm, named the general concurrent PIC algorithm (GCPIC), has been used to implement an electrostatic PIC code on the 33-node JPL Mark III Hypercube parallel computer. To decompose at PIC code using the GCPIC algorithm, the physical domain of the particle simulation is divided into sub-domains, equal in number to the number of processors, such that all sub-domains have roughly equal numbers of particles. For problems with non-uniform particle densities, these sub-domains will be of unequal physical size. Each processor is assigned a sub-domain and is responsible for updating the particles in its sub-domain. This algorithm has led to a a very efficient parallel implementation of a well-benchmarked 1-dimensional PIC code. The dominant portion of the code, updating the particle positions and velocities, is nearly 100% efficient when the number of particles is increased linearly with the number of hypercube processors used so that the number of particles per processor is constant. For example, the increase in time spent updating particles in going from a problem with 11,264 particles run on 1 processor to 360,448 particles on 32 processors was only 3% (parallel efficiency of 97%). Although implemented on a hypercube concurrent computer, this algorithm should also be efficient for PIC codes on other parallel architectures and for large PIC codes on sequential computers where part of the data must reside on external disks. copyright 1989 Academic Press, Inc

Bar codes for nuclear safeguards

International Nuclear Information System (INIS)

Keswani, A.N.; Bieber, A.M. Jr.

1983-01-01

Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

Bar codes for nuclear safeguards

International Nuclear Information System (INIS)

Keswani, A.N.; Bieber, A.M.

1983-01-01

Bar codes similar to those used in supermarkets can be used to reduce the effort and cost of collecting nuclear materials accountability data. A wide range of equipment is now commercially available for printing and reading bar-coded information. Several examples of each of the major types of commercially-available equipment are given, and considerations are discussed both for planning systems using bar codes and for choosing suitable bar code equipment

Potential and economics of CO{sub 2} sequestration; Sequestration du CO{sub 2}: faisabilite et cout

Energy Technology Data Exchange (ETDEWEB)

Jean-Baptiste, Ph.; Ciais, Ph.; Orr, J. [CEA Saclay, 91 - Gif sur Yvette (France). Direction des Sciences de la Matiere; Ducroux, R. [Centre d' Initiative et de Recherche sur l' Energie et l' Environnement, CIRENE, 91 - Palaiseau (France)

2001-07-01

Increasing atmospheric level of greenhouse gases are causing global warming and putting at risk the global climate system. The main anthropogenic greenhouse gas is CO{sub 2}. Some techniques could be used to reduced CO{sub 2} emission and stabilize atmospheric CO{sub 2} concentration, including i) energy savings and energy efficiency, ii) switch to lower carbon content fuels (natural gas) and use energy sources with zero CO{sub 2} emissions such as renewable or nuclear energy, iii) capture and store CO{sub 2} from fossil fuels combustion, and enhance the natural sinks for CO{sub 2} (forests, soils, ocean...). The purpose of this report is to provide an overview of the technology and cost for capture and storage of CO{sub 2} and to review the various options for CO{sub 2} sequestration by enhancing natural carbon sinks. Some of the factors which will influence application, including environmental impact, cost and efficiency, are discussed. Capturing CO{sub 2} and storing it in underground geological reservoirs appears as the best environmentally acceptable option. It can be done with existing technology, however, substantial R and D is needed to improve available technology and to lower the cost. Applicable to large CO{sub 2} emitting industrial facilities such as power plants, cement factories, steel industry, etc., which amount to about 30% of the global anthropic CO{sub 2} emission, it represents a valuable tool in the baffle against global warming. About 50% of the anthropic CO{sub 2} is being naturally absorbed by the biosphere and the ocean. The 'natural assistance' provided by these two large carbon reservoirs to the mitigation of climate change is substantial. The existing natural sinks could be enhanced by deliberate action. Given the known and likely environmental consequences, which could be very damaging indeed, enhancing ocean sinks does not appears as a satisfactory option. In contrast, the promotion of land sinks through demonstrated carbon

Bayesian Option Pricing Using Mixed Normal Heteroskedasticity Models

DEFF Research Database (Denmark)

Rombouts, Jeroen V.K.; Stentoft, Lars Peter

While stochastic volatility models improve on the option pricing error when compared to the Black-Scholes-Merton model, mispricings remain. This paper uses mixed normal heteroskedasticity models to price options. Our model allows for significant negative skewness and time varying higher order...... moments of the risk neutral distribution. Parameter inference using Gibbs sampling is explained and we detail how to compute risk neutral predictive densities taking into account parameter uncertainty. When forecasting out-of-sample options on the S&P 500 index, substantial improvements are found compared...

HIV Infection and AIDS in Sub-Saharan Africa: Current Status, Challenges and Opportunities.

Science.gov (United States)

Kharsany, Ayesha B M; Karim, Quarraisha A

2016-01-01

Global trends in HIV infection demonstrate an overall increase in HIV prevalence and substantial declines in AIDS related deaths largely attributable to the survival benefits of antiretroviral treatment. Sub-Saharan Africa carries a disproportionate burden of HIV, accounting for more than 70% of the global burden of infection. Success in HIV prevention in sub-Saharan Africa has the potential to impact on the global burden of HIV. Notwithstanding substantial progress in scaling up antiretroviral therapy (ART), sub-Saharan Africa accounted for 74% of the 1.5 million AIDS related deaths in 2013. Of the estimated 6000 new infections that occur globally each day, two out of three are in sub-Saharan Africa with young women continuing to bear a disproportionate burden. Adolescent girls and young women aged 15-24 years have up to eight fold higher rates of HIV infection compared to their male peers. There remains a gap in women initiated HIV prevention technologies especially for women who are unable to negotiate the current HIV prevention options of abstinence, behavior change, condoms and medical male circumcision or early treatment initiation in their relationships. The possibility of an AIDS free generation cannot be realized unless we are able to prevent HIV infection in young women. This review will focus on the epidemiology of HIV infection in sub-Saharan Africa, key drivers of the continued high incidence, mortality rates and priorities for altering current epidemic trajectory in the region. Strategies for optimizing the use of existing and increasingly limited resources are included.

HIV Infection and AIDS in Sub-Saharan Africa: Current Status, Challenges and Opportunities

Science.gov (United States)

Kharsany, Ayesha B.M.; Karim, Quarraisha A.

2016-01-01

Global trends in HIV infection demonstrate an overall increase in HIV prevalence and substantial declines in AIDS related deaths largely attributable to the survival benefits of antiretroviral treatment. Sub-Saharan Africa carries a disproportionate burden of HIV, accounting for more than 70% of the global burden of infection. Success in HIV prevention in sub-Saharan Africa has the potential to impact on the global burden of HIV. Notwithstanding substantial progress in scaling up antiretroviral therapy (ART), sub-Saharan Africa accounted for 74% of the 1.5 million AIDS related deaths in 2013. Of the estimated 6000 new infections that occur globally each day, two out of three are in sub-Saharan Africa with young women continuing to bear a disproportionate burden. Adolescent girls and young women aged 15-24 years have up to eight fold higher rates of HIV infection compared to their male peers. There remains a gap in women initiated HIV prevention technologies especially for women who are unable to negotiate the current HIV prevention options of abstinence, behavior change, condoms and medical male circumcision or early treatment initiation in their relationships. The possibility of an AIDS free generation cannot be realized unless we are able to prevent HIV infection in young women. This review will focus on the epidemiology of HIV infection in sub-Saharan Africa, key drivers of the continued high incidence, mortality rates and priorities for altering current epidemic trajectory in the region. Strategies for optimizing the use of existing and increasingly limited resources are included. PMID:27347270

Risky business: rhesus monkeys exhibit persistent preferences for risky options.

Science.gov (United States)

Xu, Eric R; Kralik, Jerald D

2014-01-01

Rhesus monkeys have been shown to prefer risky over safe options in experiential decision-making tasks. These findings might be due, however, to specific contextual factors, such as small amounts of fluid reward and minimal costs for risk-taking. To better understand the factors affecting decision-making under risk in rhesus monkeys, we tested multiple factors designed to increase the stakes including larger reward amounts, distinct food items rather than fluid reward, a smaller number of trials per session, and risky options with greater variation that also included non-rewarded outcomes. We found a consistent preference for risky options, except when the expected value of the safe option was greater than the risky option. Thus, with equivalent mean utilities between the safe and risky options, rhesus monkeys appear to have a robust preference for the risky options in a broad range of circumstances, akin to the preferences found in human children and some adults in similar tasks. One account for this result is that monkeys make their choices based on the salience of the largest payoff, without integrating likelihood and value across trials. A related idea is that they fail to override an impulsive tendency to select the option with the potential to obtain the highest possible outcome. Our results rule out strict versions of both accounts and contribute to an understanding of the diversity of risky decision-making among primates.

Socio-economic determinants in selecting childhood diarrhoea treatment options in Sub-Saharan Africa: A multilevel model

Directory of Open Access Journals (Sweden)

Lawoko Stephen

2011-03-01

Full Text Available Abstract Background Diarrhoea disease which has been attributed to poverty constitutes a major cause of morbidity and mortality in children aged five and below in most low-and-middle income countries. This study sought to examine the contribution of individual and neighbourhood socio-economic characteristics to caregiver's treatment choices for managing childhood diarrhoea at household level in sub-Saharan Africa. Methods Multilevel multinomial logistic regression analysis was applied to Demographic and Health Survey data conducted in 11 countries in sub-Saharan Africa. The unit of analysis were the 12,988 caregivers of children who were reported to have had diarrhoea two weeks prior to the survey period. Results There were variability in selecting treatment options based on several socioeconomic characteristics. Multilevel-multinomial regression analysis indicated that higher level of education of both the caregiver and that of the partner, as well as caregivers occupation were associated with selection of medical centre, pharmacies and home care as compared to no treatment. In contrast, caregiver's partners' occupation was negatively associated with selection medical centre and home care for managing diarrhoea. In addition, a low-level of neighbourhood socio-economic disadvantage was significantly associated with selection of both medical centre and pharmacy stores and medicine vendors. Conclusion In the light of the findings from this study, intervention aimed at improving on care seeking for managing diarrhoea episode and other childhood infectious disease should jointly consider the influence of both individual SEP and the level of economic development of the communities in which caregivers of these children resides.

Integrating Renewable Energy Requirements Into Building Energy Codes

Energy Technology Data Exchange (ETDEWEB)

Kaufmann, John R.; Hand, James R.; Halverson, Mark A.

2011-07-01

This report evaluates how and when to best integrate renewable energy requirements into building energy codes. The basic goals were to: (1) provide a rough guide of where we’re going and how to get there; (2) identify key issues that need to be considered, including a discussion of various options with pros and cons, to help inform code deliberations; and (3) to help foster alignment among energy code-development organizations. The authors researched current approaches nationally and internationally, conducted a survey of key stakeholders to solicit input on various approaches, and evaluated the key issues related to integration of renewable energy requirements and various options to address those issues. The report concludes with recommendations and a plan to engage stakeholders. This report does not evaluate whether the use of renewable energy should be required on buildings; that question involves a political decision that is beyond the scope of this report.

Synthesis and structural and electrical characterization of new materials Bi{sub 3}R{sub 2}FeTi{sub 3}O{sub 15}

Energy Technology Data Exchange (ETDEWEB)

Gil Novoa, O.D.; Landinez Tellez, D.A. [Grupo de Fisica de Nuevos Materiales, Departamento de Fisica, Universidad Nacional de Colombia, AA 5997, Bogota DC (Colombia); Roa-Rojas, J., E-mail: jroar@unal.edu.co [Grupo de Fisica de Nuevos Materiales, Departamento de Fisica, Universidad Nacional de Colombia, AA 5997, Bogota DC (Colombia)

2012-08-15

In this work we report the synthesis of polycrystalline samples of Bi{sub 5}FeTi{sub 3}O{sub 15} and Bi{sub 3}R{sub 2}FeTi{sub 3}O{sub 15} new compounds with R=Nd, Sm, Gd, Dy, Ho and Yb. The materials were synthesized by the standard solid state reaction recipe from high purity (99.99%) powders. The structural characteristics of materials were analyzed by X-ray diffraction experiments. Rietveld refinement by the GSAS code was performed, taking the input data from the ICSD 74037 database. Results reveal that materials crystallized in orthorhombic single-phase structures and space group Fmm2. Measurements of polarization as a function of applied electric field were carried out using a Radiant Technology polarimeter. We determine the occurrence of hysteretic behaviors, which are characteristic of ferroelectric materials. The main values of remnant and coercive applied fields were observed for substitutions with Yb and Nd, which have the main atomic radii.

76 FR 37034 - Certain Employee Remuneration in Excess of $1,000,000 Under Internal Revenue Code Section 162(m)

Science.gov (United States)

2011-06-24

... Certain Employee Remuneration in Excess of $1,000,000 Under Internal Revenue Code Section 162(m) AGENCY... remuneration in excess of $1,000,000 under the Internal Revenue Code (Code). The proposed regulations clarify... stock options, it is intended that the directors may retain discretion as to the exact number of options...

Engineered Option Treatment of Remediated Nitrate Salts: Surrogate Batch-Blending Testing

Energy Technology Data Exchange (ETDEWEB)

Anast, Kurt Roy [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2016-03-11

This report provides results from batch-blending test work for remediated nitrate salt (RNS) treatment. Batch blending was identified as a preferred option for blending RNS and unremediated nitrate salt (UNS) material with zeolite to effectively safe the salt/Swheat material identified as ignitable (U.S. Environmental Protection Agency code D001). Blending with zeolite was the preferred remediation option identified in the Options Assessment Report and was originally proposed as the best option for remediation by Clark and Funk in their report, Chemical Reactivity and Recommended Remediation Strategy for Los Alamos Remediated Nitrate Salt (RNS) Wastes, and also found to be a preferred option in the Engineering Options Assessment Report: Nitrate Salt Waste Stream Processing. This test work evaluated equipment and recipe alternatives to achieve effective blending of surrogate waste with zeolite.

Solution of the linear transport equation, monoenergetic in multiregions with anisotopic scattering by the method F sub(N)

International Nuclear Information System (INIS)

Pontedeiro, E.M.B.D.; Maiorino, J.R.

1982-01-01

The linear equation transport, monoenergetic, with anysotropic scattering, in multiregions, by F sub(N) method, is resolved. The mathematical analysis used for this method consists in to use parcially the expansion method in singular autofunctions, or Case's method, aiming to derive a set of integral equations coupled to the angular distribution in the boundaries and interfaces, and then to approximate these distributions by polynomics of N order, aiming to derive, with the use of these boundary and continuity conditions in the interfaces, a set of algebric equations for the coef. of polynomical approximation. With the goal to obtain numerical results, a computer code (FNAM-1) with options for the number of regions, boundary conditions, F sub(N) approx order, were developed. Numerical results were then obtained for various sample problems and compared with the results published in the literature with the objective to demonstrate the precision and applicability of the F sub(N) method. (E.G.) [pt

[QR-Code based patient tracking: a cost-effective option to improve patient safety].

Science.gov (United States)

Fischer, M; Rybitskiy, D; Strauß, G; Dietz, A; Dressler, C R

2013-03-01

Hospitals are implementing a risk management system to avoid patient or surgery mix-ups. The trend is to use preoperative checklists. This work deals specifically with a type of patient identification, which is realized by storing patient data on a patient-fixed medium. In 127 ENT surgeries data relevant for patient identification were encrypted in a 2D-QR-Code. The code, as a separate document coming with the patient chart or as a patient wristband, has been decrypted in the OR and the patient data were presented visible for all persons. The decoding time, the compliance of the patient data, as well as the duration of the patient identification was compared with the traditional patient identification by inspection of the patient chart. A total of 125 QR codes were read. The time for the decrypting of QR-Code was 5.6 s, the time for the screen view for patient identification was 7.9 s, and for a comparison group of 75 operations traditional patient identification was 27.3 s. Overall, there were 6 relevant information errors in the two parts of the experiment. This represents a ratio of 0.6% for 8 relevant classes per each encrypted QR code. This work allows a cost effective way to technically support patient identification based on electronic patient data. It was shown that the use in the clinical routine is possible. The disadvantage is a potential misinformation from incorrect or missing information in the HIS, or due to changes of the data after the code was created. The QR-code-based patient tracking is seen as a useful complement to the already widely used identification wristband. © Georg Thieme Verlag KG Stuttgart · New York.

Connecting Neural Coding to Number Cognition: A Computational Account

Science.gov (United States)

Prather, Richard W.

2012-01-01

The current study presents a series of computational simulations that demonstrate how the neural coding of numerical magnitude may influence number cognition and development. This includes behavioral phenomena cataloged in cognitive literature such as the development of numerical estimation and operational momentum. Though neural research has…

Multi keno-VAX a modified version of the reactor computer code Multi keno-2

Energy Technology Data Exchange (ETDEWEB)

Imam, M [National center for nuclear safety and radiation control, atomic energy authority, Cairo, (Egypt)

1995-10-01

The reactor computer code Multi keno-2 is developed in Japan from the original Monte Carlo Keno-IV. By applications of this code on some real problems, fatal errors were detected. These errors are related to the restart option in the code. The restart option is essential for solving time-consuming problems on mini-computer like VAX-6320. These errors were corrected and other modifications were carried out in the code. Because of these modifications new input data description was written for the code. Thus a new VAX/VMS version for the program was developed which is also adaptable for mini-mainframes. This new developed program, called Multi keno-VAX is accepted in the Nea-IAEA data bank and is added to its international computer codes library. 1 fig.

Multi keno-VAX a modified version of the reactor computer code Multi keno-2

International Nuclear Information System (INIS)

Imam, M.

1995-01-01

The reactor computer code Multi keno-2 is developed in Japan from the original Monte Carlo Keno-IV. By applications of this code on some real problems, fatal errors were detected. These errors are related to the restart option in the code. The restart option is essential for solving time-consuming problems on mini-computer like VAX-6320. These errors were corrected and other modifications were carried out in the code. Because of these modifications new input data description was written for the code. Thus a new VAX/VMS version for the program was developed which is also adaptable for mini-mainframes. This new developed program, called Multi keno-VAX is accepted in the Nea-IAEA data bank and is added to its international computer codes library. 1 fig

Cryptography cracking codes

CERN Document Server

2014-01-01

While cracking a code might seem like something few of us would encounter in our daily lives, it is actually far more prevalent than we may realize. Anyone who has had personal information taken because of a hacked email account can understand the need for cryptography and the importance of encryption-essentially the need to code information to keep it safe. This detailed volume examines the logic and science behind various ciphers, their real world uses, how codes can be broken, and the use of technology in this oft-overlooked field.

Assessment of void fraction prediction using the RETRAN-3d and CORETRAN-01/VIPRE-02 codes

International Nuclear Information System (INIS)

Aounallah, Y.; Coddington, P.; Gantner, U.

2000-01-01

A review of wide-range void fraction correlations against an extensive database has been undertaken to identify the correlations best suited for nuclear safety applications. Only those based on the drift-flux model have been considered. The survey confirmed the application range of the Chexal-Lellouche correlation, and the database was also used to obtain new parameters for the Inoue drift-flux correlation, which was also found suitable. A void fraction validation study has also been undertaken for the codes RETRAN-3D and CORETRAN-01/VIPRE-02 at the assembly and sub-assembly levels. The study showed the impact of the RETRAN-03 user options on the predicted void fraction, and the RETRAN-3D limitation at very low fluid velocity. At the sub-assembly level, CORETRAN-01/VIPRE-02 substantially underestimates the void in regions with low power-to-flow ratios. Otherwise, a generally good predictive performance was obtained with both RETRAN-3D and CORETRAN-01/VIPRE-02. (authors)

Assessment of void fraction prediction using the RETRAN-3d and CORETRAN-01/VIPRE-02 codes

Energy Technology Data Exchange (ETDEWEB)

Aounallah, Y.; Coddington, P.; Gantner, U

2000-07-01

A review of wide-range void fraction correlations against an extensive database has been undertaken to identify the correlations best suited for nuclear safety applications. Only those based on the drift-flux model have been considered. The survey confirmed the application range of the Chexal-Lellouche correlation, and the database was also used to obtain new parameters for the Inoue drift-flux correlation, which was also found suitable. A void fraction validation study has also been undertaken for the codes RETRAN-3D and CORETRAN-01/VIPRE-02 at the assembly and sub-assembly levels. The study showed the impact of the RETRAN-03 user options on the predicted void fraction, and the RETRAN-3D limitation at very low fluid velocity. At the sub-assembly level, CORETRAN-01/VIPRE-02 substantially underestimates the void in regions with low power-to-flow ratios. Otherwise, a generally good predictive performance was obtained with both RETRAN-3D and CORETRAN-01/VIPRE-02. (authors)

TRACE/VALKIN: a neutronics-thermohydraulics coupled code to analyze strong 3D transients

Energy Technology Data Exchange (ETDEWEB)

Rafael Miro; Gumersindo Verdu; Ana Maria Sanchez [Chemical and Nuclear Engineering Department. Polytechnic University of Valencia. Cami de Vera s/n. 46022 Valencia (Spain); Damian Ginestar [Applied Mathematics Department. Polytechnic University of Valencia. Cami de Vera s/n. 46022 Valencia (Spain)

2005-07-01

Full text of publication follows: A nuclear reactor simulator consists mainly of two different blocks, which solve the models used for the basic physical phenomena taking place in the reactor. In this way, there is a neutronic module which simulates the neutron balance in the reactor core, and a thermal-hydraulics module, which simulates the heat transfer in the fuel, the heat transfer from the fuel to the water, and the different condensation and evaporation processes taking place in the reactor core and in the condenser systems. TRACE is a two-phase, two-fluid thermal-hydraulic reactor systems analysis code. The TRACE acronym stands for TRAC/RELAP Advanced Computational Engine, reflecting its ability to run both RELAP5 and TRAC legacy input models. It includes a three-dimensional kinetics module called PARCS for performing advanced analysis of coupled core thermal-hydraulic/kinetics problems. TRACE-VALKIN code is a new time domain analysis code to study transients in LWR reactors. This code uses the best estimate code TRACE to give account of the heat transfer and thermal-hydraulic processes, and a 3D neutronics module. This module has two options, the MODKIN option that makes use of a modal method based on the assumption that the neutronic flux can be approximately expanded in terms of the dominant lambda modes associated with a static configuration of the reactor core, and the NOKIN option that uses a one-step backward discretization of the neutron diffusion equation. The lambda modes are obtained using the Implicit Restarted Arnoldi approach or the Jacob-Davidson algorithm. To check the performance of the coupled code TRACE-VALKIN against complex 3D neutronic transients, using the cross-sections tables generated with the translator SIMTAB from SIMULATE to TRACE/VALKIN, the Cofrentes NPP SCRAM-61 transient is simulated. Cofrentes NPP is a General Electric BWR-6 design located in Valencia-land (Spain). It is in operation since 1985 and currently in its fifteenth

Slowing global warming biotically - Options for the United States

International Nuclear Information System (INIS)

Anon.

1991-01-01

Each of the five biotic approaches introduced in Chapter 2 is applicable to some extent in the US. Taking US land-use characteristics into account, a menu of policy options tailored to US carbon storage opportunities is presented. Several of the options are capable of significantly reducing net US carbon emissions; several offer corollary benefits in areas other than global warming mitigation. The time frame and costs of the different options vary widely, although in most cases some level of implementation appears economically justified even without considering global warming. The approach, projected costs, and advantages of seven different policy options are profiled

An improved thermal model for the computer code NAIAD

International Nuclear Information System (INIS)

Rainbow, M.T.

1982-12-01

An improved thermal model, based on the concept of heat slabs, has been incorporated as an option into the thermal hydraulic computer code NAIAD. The heat slabs are one-dimensional thermal conduction models with temperature independent thermal properties which may be internal and/or external to the fluid. Thermal energy may be added to or removed from the fluid via heat slabs and passed across the external boundary of external heat slabs at a rate which is a linear function of the external surface temperatures. The code input for the new option has been restructured to simplify data preparation. A full description of current input requirements is presented

Nd{sub 39}Ir{sub 10.98}In{sub 36.02}. A complex intergrowth structure with CsCl- and AlB{sub 2}-related slabs

Energy Technology Data Exchange (ETDEWEB)

Dominyuk, Nataliya; Zaremba, Vasyl' I. [Ivan Franko National Univ., Lviv (Ukraine). Dept. of Inorganic Chemistry; Rodewald, Ute C.; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie

2015-11-01

The ternary indide Nd{sub 39}Ir{sub 10.98}In{sub 36.02} was synthesized by arc-melting and characterized by single crystal X-ray diffraction. Nd{sub 39}Ir{sub 10.98}In{sub 36.02} crystallizes with a new structure type: Pearson code oP172, Pbam, a = 3175.4(6), b = 3762.5(8), c = 378.02(8) pm, wR2 = 0.0828, 5544 F{sup 2} values, and 262 variables. Although the structure contains 44 crystallographically independent sites, it can easily be explained as an intergrowth structure of CsCl and AlB{sub 2} related slabs. The larger indium atoms fill all distorted CsCl slabs. The trigonal prismatic (AlB{sub 2}) slabs have no uniform size. The larger ones are filled by indium and the smaller ones by the iridium atoms. Additionally, one trigonal prism shows a mixed occupancy by indium and iridium. The crystal chemistry of Nd{sub 39}Ir{sub 10.98}In{sub 36.02} is discussed in the context of other intergrowth structures with the same simple slabs.

Summary report on UO<sub>2sub> thermal conductivity model refinement and assessment studies

Energy Technology Data Exchange (ETDEWEB)

Liu, Xiang-Yang [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Cooper, Michael William Donald [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Mcclellan, Kenneth James [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Lashley, Jason Charles [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Byler, Darrin David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Bell, B. D.C. [Imperial College, London (United Kingdom); Grimes, R. W. [Imperial College, London (United Kingdom); Stanek, Christopher Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Andersson, David Ragnar [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2017-02-03

Uranium dioxide (UO<sub>2sub>) is the most commonly used fuel in light water nuclear reactors and thermal conductivity controls the removal of heat produced by fission, therefore, governing fuel temperature during normal and accident conditions. The use of fuel performance codes by the industry to predict operational behavior is widespread. A primary source of uncertainty in these codes is thermal conductivity, and optimized fuel utilization may be possible if existing empirical models were replaced with models that incorporate explicit thermal conductivity degradation mechanisms during fuel burn-up. This approach is able to represent the degradation of thermal conductivity due to each individual defect type, rather than the overall burn-up measure typically used which is not an accurate representation of the chemical or microstructure state of the fuel that actually governs thermal conductivity and other properties. To generate a mechanistic thermal conductivity model, molecular dynamics (MD) simulations of UO<sub>2sub> thermal conductivity including representative uranium and oxygen defects and fission products are carried out. These calculations employ a standard Buckingham type interatomic potential and a potential that combines the many-body embedded atom method potential with Morse-Buckingham pair potentials. Potential parameters for UO<sub>2+xsub> and ZrO<sub>2sub> are developed for the latter potential. Physical insights from the resonant phonon-spin scattering mechanism due to spins on the magnetic uranium ions have been introduced into the treatment of the MD results, with the corresponding relaxation time derived from existing experimental data. High defect scattering is predicted for Xe atoms compared to that of La and Zr ions. Uranium defects reduce the thermal conductivity more than oxygen defects. For each defect and fission product, scattering parameters are derived for application in both a Callaway model and the corresponding high

A critical consideration of ethical foundations for the accounting profession

OpenAIRE

Buys, Pieter; Visser, Susan; Oberholzer, Merwe

2012-01-01

When considering some of the key reasons for the desperate state of the current global economic environment, it is difficult to deny accounting's role therein. Although accounting institutes require adherence to codes of conduct, the question remains as to what happened to the stewardship function of the accounting profession. This article has critically reflected on the question, 'What constitutes an ethical accounting profession'? The key principles within many institutes' codes of conduct,...

Amorphous phase formation in the Cu{sub 36}Zr{sub 59}A{sub l5} and Cu{sub 48}Zr{sub 43}A{sub l9} ternary alloys studied by molecular dynamics; Estudo da formacao de fase amorfa nas ligas ternarias Cu{sub 36}Zr{sub 59}A{sub l5} e Cu{sub 48}Zr{sub 43}A{sub l9} por dinamica molecular

Energy Technology Data Exchange (ETDEWEB)

Aliaga, L.C.R.; Schimidt, C.S.; Lima, L.V.; Domingues, G.M.B.; Bastos, I.N., E-mail: aliaga@iprj.uer.br [Universidade do Estado do Rio de Janeiro (UERJ), Nova friburgo, RJ (Brazil). Departamento de Materiais

2016-07-01

Amorphous alloys presents better mechanical and physical properties than its crystalline counterparts. However, there is a scarce understanding on structure - properties relationship in this class of materials. This paper presents the results of the molecular dynamics application to obtain an atomistic description of melting, solidification and the glass forming ability in the ternary Cu{sub 36}Zr{sub 59}A{sub l5} and Cu{sub 48}Zr{sub 43}A{sub l9} alloys. In the study we used the EAM potential and different cooling rates, β = 0.1, 1 and 100 K/ps to form the amorphous phase in a system consisting of 32,000 atoms by using the free code LAMMPS. The solidus and liquidus temperatures, on a heating rate of the 5 K/ps, were obtained. Also, on the cooling down step, it was observed that the glass transition temperature (T{sub g}) decreases as cooling rate increases. The structural evolution was analyzed through the radial distribution functions and Voronoi polyhedra. Furthermore, it was determined the evolution of viscosity upper T{sub g}, as well as the fragility (m) parameter for each amorphous alloy. The thermal parameters of the simulation obtained are compared with those of the experiments. (author)

Tritium control and accountability instructions

International Nuclear Information System (INIS)

Wall, W.R.; Cruz, S.L.

1985-08-01

This instruction describes the tritium accountability procedures practiced by the Tritium Research Laboratory, at Sandia National Laboratories, Livermore. The accountability procedures are based upon the Sandia National Laboratories, Livermore, Nuclear Materials Operations Manual, SAND83-8036. The Nuclear Materials Operations Manual describes accountability techniques which are in compliance with the Department of Energy 5630 series Orders, Code of Federal Regulations, and Sandia National Laboratories Instructions

Reconstruction of an account's past

International Nuclear Information System (INIS)

Waterman, M.S.; Lowe, V.W.

1977-01-01

Historical records and data frequently have been reduced by combination of accounts. The problem addressed is that of finding all ways a given set of accounts could have been combined to give some given set of reduced accounts. An algorithm has been developed to accomplish this task and a computer code in FORTRAN is given. An example with some MUF data is also presented

Tritium control and accountability instructions

International Nuclear Information System (INIS)

Wall, W.R.

1981-03-01

This instruction describes the tritium accountability procedures practiced by the Tritium Research Laboratory, Building 968 at Sandia National Laboratories, Livermore. The accountability procedures are based upon the Sandia National Laboratories, Livermore, Nuclear Materials Operations Manual, SAND78-8018. The Nuclear Materials Operations Manual describes accountability techniques which are in compliance with the Department of Energy Manual, Code of Federal Regulations, and Sandia National Laboratories Instructions

Rate adaptive multilevel coded modulation with high coding gain in intensity modulation direct detection optical communication

Science.gov (United States)

Xiao, Fei; Liu, Bo; Zhang, Lijia; Xin, Xiangjun; Zhang, Qi; Tian, Qinghua; Tian, Feng; Wang, Yongjun; Rao, Lan; Ullah, Rahat; Zhao, Feng; Li, Deng'ao

2018-02-01

A rate-adaptive multilevel coded modulation (RA-MLC) scheme based on fixed code length and a corresponding decoding scheme is proposed. RA-MLC scheme combines the multilevel coded and modulation technology with the binary linear block code at the transmitter. Bits division, coding, optional interleaving, and modulation are carried out by the preset rule, then transmitted through standard single mode fiber span equal to 100 km. The receiver improves the accuracy of decoding by means of soft information passing through different layers, which enhances the performance. Simulations are carried out in an intensity modulation-direct detection optical communication system using MATLAB®. Results show that the RA-MLC scheme can achieve bit error rate of 1E-5 when optical signal-to-noise ratio is 20.7 dB. It also reduced the number of decoders by 72% and realized 22 rate adaptation without significantly increasing the computing time. The coding gain is increased by 7.3 dB at BER=1E-3.

Valuating Privacy with Option Pricing Theory

Science.gov (United States)

Berthold, Stefan; Böhme, Rainer

One of the key challenges in the information society is responsible handling of personal data. An often-cited reason why people fail to make rational decisions regarding their own informational privacy is the high uncertainty about future consequences of information disclosures today. This chapter builds an analogy to financial options and draws on principles of option pricing to account for this uncertainty in the valuation of privacy. For this purpose, the development of a data subject's personal attributes over time and the development of the attribute distribution in the population are modeled as two stochastic processes, which fit into the Binomial Option Pricing Model (BOPM). Possible applications of such valuation methods to guide decision support in future privacy-enhancing technologies (PETs) are sketched.

Zebra: An advanced PWR lattice code

Energy Technology Data Exchange (ETDEWEB)

Cao, L.; Wu, H.; Zheng, Y. [School of Nuclear Science and Technology, Xi' an Jiaotong Univ., No. 28, Xianning West Road, Xi' an, ShannXi, 710049 (China)

2012-07-01

This paper presents an overview of an advanced PWR lattice code ZEBRA developed at NECP laboratory in Xi'an Jiaotong Univ.. The multi-group cross-section library is generated from the ENDF/B-VII library by NJOY and the 361-group SHEM structure is employed. The resonance calculation module is developed based on sub-group method. The transport solver is Auto-MOC code, which is a self-developed code based on the Method of Characteristic and the customization of AutoCAD software. The whole code is well organized in a modular software structure. Some numerical results during the validation of the code demonstrate that this code has a good precision and a high efficiency. (authors)

Zebra: An advanced PWR lattice code

International Nuclear Information System (INIS)

Cao, L.; Wu, H.; Zheng, Y.

2012-01-01

This paper presents an overview of an advanced PWR lattice code ZEBRA developed at NECP laboratory in Xi'an Jiaotong Univ.. The multi-group cross-section library is generated from the ENDF/B-VII library by NJOY and the 361-group SHEM structure is employed. The resonance calculation module is developed based on sub-group method. The transport solver is Auto-MOC code, which is a self-developed code based on the Method of Characteristic and the customization of AutoCAD software. The whole code is well organized in a modular software structure. Some numerical results during the validation of the code demonstrate that this code has a good precision and a high efficiency. (authors)

Applying real options analysis to assess cleaner energy development strategies

International Nuclear Information System (INIS)

Cheng, Ching-Tsung; Lo, Shang-Lien; Lin, Tyrone T.

2011-01-01

The energy industry, accounts for the largest portion of CO 2 emissions, is facing the issue of compliance with the national clean energy policy. The methodology for evaluating the energy mix policy is crucial because of the characteristics of lead time embedded with the power generation facilities investment and the uncertainty of future electricity demand. In this paper, a modified binomial model based on sequential compound options, which may account for the lead time and uncertainty as a whole is established, and a numerical example on evaluating the optional strategies and the strategic value of the cleaner energy policy is also presented. It is found that the optimal decision at some nodes in the binomial tree is path dependent, which is different from the standard sequential compound option model with lead time or time lag concept. The proposed modified binomial sequential compound real options model can be generalized and extensively applied to solve the general decision problems that deal with the long lead time of many government policies as well as capital intensive investments. - Highlights: → Introducing a flexible strategic management approach for government policy making. → Developing a modified binomial real options model based on sequential compound options. → Proposing an innovative model for managing the long term policy with lead time. → Applying to evaluate the options of various scenarios of cleaner energy strategies.

Optical characterization of Zn-doped In{sub 0.14}Ga{sub 0.86}As{sub 0.13}Sb{sub 0.87} layers grown by liquid phase epitaxy

Energy Technology Data Exchange (ETDEWEB)

Diaz-Reyes, Joel, E-mail: jdiazr2010@yahoo.com [CIBA-IPN, Ex-Hacienda de San Juan Molino Km. 1.5. Tepetitla, Tlaxcala 90700. Mexico (Mexico); Rodriguez-Fragoso, Patricia; Mendoza-Alvarez, Julio Gregorio [Departamento de Fisica, CINVESTAV-IPN, A.P. 14-740, Mexico, D.F. 07000 (Mexico)

2013-02-15

Quaternary layers were grown by liquid phase epitaxy on (1 0 0) GaSb substrates under lattice-matching conditions. The low-temperature photoluminescence of p-type In{sub x}Ga{sub 1-x}As{sub y}Sb{sub 1-y} was obtained as a function of incorporated zinc concentration. The photoluminescence spectra were interpreted using a model which takes into account nonparabolicity of the valence band. Calculations of the peak position and photoluminescence transitions were performed. Both the band filling as well as band tailing due to Coulomb interaction of free carriers with ionized impurities and shrinkage due to exchange interaction between free carriers were considered in order to properly account for the observed features of photoluminescence spectra. It is proposed that low-temperature photoluminescence band-to-band energy transition can be used to obtain the carrier concentration in p-type In{sub x}Ga{sub 1-x}As{sub y}Sb{sub 1-y}. This method could be used to estimate free carrier concentration ranging from 6.036 Multiplication-Sign 10{sup 16} to 1.350 Multiplication-Sign 10{sup 18} cm{sup -3}. - Highlights: Black-Right-Pointing-Pointer In this work the optical characterization of InGaAsSb highly doped with zinc by grown LPE.is reported Black-Right-Pointing-Pointer It analyses the LT-PL of p-type InGaAsSb layersis analzysed as a function of incorporated zinc concentration. Black-Right-Pointing-Pointer The PL was interpreted using a model that takes into account nonparabolicity of the valence band. Black-Right-Pointing-Pointer The band-to-band transition energy can be used to estimate the hole concentration in InGaAsSb.

MCNP: a general Monte Carlo code for neutron and photon transport

International Nuclear Information System (INIS)

1978-07-01

The general-purpose Monte Carlo code MCNP can be used for neutron, photon, or coupled neutron--photon transport. The code treats an arbitrary three-dimensional configuration of materials in geometric cells bounded by first- and second-degree surfaces and some special fourth-degree surfaces (elliptical tori). Pointwise cross-section data are used. For neutrons, all reactions given in a particular cross-section evaluation (such as ENDF/B-IV) are accounted for. For photons, the code takes account of incoherent and coherent scattering, the possibility of fluorescent emission following photoelectric absorption, and absorption in pair production with local emission of annihilation radiation. Standard optional variance reduction schemes include geometry splitting and Russian roulette, the exponential transformation, energy splitting, forced collisions in designated cells, flux estimates at point detectors, track-length estimators, and source biasing. The standard output of MCNP includes two-way current as a function of energy, time, and angle with the normal, across any subset of bounding surfaces in the problem. Fluxes across any set of bounding surfaces are available as a function of time and energy. Similarly, the flux at designated points and the average flux in a cell (track length per unit volume) are standard tallies. Reactions such as fissions or absorptions may be obtained in a subset of geometric cells. The heating tallies give the energy deposition per starting particle. In addition, particles may be flagged when they cross specified surfaces or enter designated cells, and the contributions of these flagged particles to certain of the tallies are listed separately. All quantities printed out have their relative errors listed also. 11 figures, 27 tables

A FACSIMILE code for calculating void swelling and creep, with vacancy loops present: version VS4

International Nuclear Information System (INIS)

Windsor, M.E.; Bullough, R.; Wood, M.H.

1981-10-01

This FACSIMILE code calculates void swelling and creep of irradiated materials, taking into account the effects of cavities, interstitial loops, vacancy loops, dislocation network and either grain boundaries or foil surfaces. The creep calculations are based on SIPA theory (stress induced preferred absorption), with no preferred nucleation. Either interactive or non-interactive options are available for the sink strength equations, but rate limitation is not incorporated. FACSIMILE is a computer program for solving simultaneous differential equations, and this VS4 code is one of a series of codes for calculating void swelling using increasingly complex theories. Other reports describing the VS1 and VS2 codes explain their use under control of the TSO system of the Harwell IBM 3033 computer, and explain the basic organization of the codes as required for use by FACSIMILE. The creep theory assumes that the material is under a constant uniaxial tensile stress during the irradiation. Three directions are considered for network parameters relative to the direction of the stress, and two directions for interstitial and vacancy loops. To give a full picture of these various contributions to the total creep, a large set of output parameter values are printed for each demanded dose value via a FORTRAN subroutine. (author)

A microwave FEL [free electron laser] code using waveguide modes

International Nuclear Information System (INIS)

Byers, J.A.; Cohen, R.H.

1987-08-01

A free electron laser code, GFEL, is being developed for application to the LLNL tokamak current drive experiment, MTX. This single frequency code solves for the slowly varying complex field amplitude using the usual wiggler-averaged equations of existing codes, in particular FRED, except that it describes the fields by a 2D expansion in the rectangular waveguide modes, using coupling coefficients similar to those developed by Wurtele, which include effects of spatial variations in the fields seen by the wiggler motion of the particles. Our coefficients differ from those of Wurtele in two respects. First, we have found a missing √2γ/a/sub w/ factor in his C/sub z/; when corrected this increases the effect of the E/sub z/ field component and this in turn reduces the amplitude of the TM mode. Second, we have consistently retained all terms of second order in the wiggle amplitude. Both corrections are necessary for accurate computation. GFEL has the capability of following the TE/sub 0n/ and TE(M)/sub m1/ modes simultaneously. GFEL produces results nearly identical to those from FRED if the coupling coefficients are adjusted to equal those implied by the algorithm in FRED. Normally, the two codes produce results that are similar but different in detail due to the different treatment of modes higher than TE/sub 01/. 5 refs., 2 figs., 1 tab

MCNP code

International Nuclear Information System (INIS)

Cramer, S.N.

1984-01-01

The MCNP code is the major Monte Carlo coupled neutron-photon transport research tool at the Los Alamos National Laboratory, and it represents the most extensive Monte Carlo development program in the United States which is available in the public domain. The present code is the direct descendent of the original Monte Carlo work of Fermi, von Neumaum, and Ulam at Los Alamos in the 1940s. Development has continued uninterrupted since that time, and the current version of MCNP (or its predecessors) has always included state-of-the-art methods in the Monte Carlo simulation of radiation transport, basic cross section data, geometry capability, variance reduction, and estimation procedures. The authors of the present code have oriented its development toward general user application. The documentation, though extensive, is presented in a clear and simple manner with many examples, illustrations, and sample problems. In addition to providing the desired results, the output listings give a a wealth of detailed information (some optional) concerning each state of the calculation. The code system is continually updated to take advantage of advances in computer hardware and software, including interactive modes of operation, diagnostic interrupts and restarts, and a variety of graphical and video aids

DOZIM - evaluation dose code for nuclear accident

International Nuclear Information System (INIS)

Oprea, I.; Musat, D.; Ionita, I.

2008-01-01

During a nuclear accident an environmentally significant fission products release can happen. In that case it is not possible to determine precisely the air fission products concentration and, consequently, the estimated doses will be affected by certain errors. The stringent requirement to cope with a nuclear accident, even minor, imposes creation of a computation method for emergency dosimetric evaluations needed to compare the measurement data to certain reference levels, previously established. These comparisons will allow a qualified option regarding the necessary actions to diminish the accident effects. DOZIM code estimates the soil contamination and the irradiation doses produced either by radioactive plume or by soil contamination. Irradiations either on whole body or on certain organs, as well as internal contamination doses produced by isotope inhalation during radioactive plume crossing are taken into account. The calculus does not consider neither the internal contamination produced by contaminated food consumption, or that produced by radioactive deposits resuspension. The code is recommended for dose computation on the wind direction, at distances from 10 2 to 2 x 10 4 m. The DOZIM code was utilized for three different cases: - In air TRIGA-SSR fuel bundle destruction with different input data for fission products fractions released into the environment; - Chernobyl-like accident doses estimation; - Intervention areas determination for a hypothetical severe accident at Cernavoda Nuclear Power Plant. For the first case input data and results (for a 60 m emission height without iodine retention on active coal filters) are presented. To summarize, the DOZIM code conception allows the dose estimation for any nuclear accident. Fission products inventory, released fractions, emission conditions, atmospherical and geographical parameters are the input data. Dosimetric factors are included in the program. The program is in FORTRAN IV language and was run on

Analytical representation of the thermal conductivity and electrical resistivity of UC/sub 1 +- x/, PuC/sub 1-x/, and (U/sub y/Pu/sub 1-y/)C/sub 1 +- x/

International Nuclear Information System (INIS)

Storms, E.K.

1982-12-01

This report uses selected measurements from the literature to construct analytical expressions that describe the electrical and thermal conductivity of pure, high-density UC/sub 1 +- x/, PuC/sub 1-x/, and (U/sub y/Pu/sub 1-y/C/sub 1 +- x/ as a function of x,y, and temperature. The approach shows that many of the differences between the reported measurements can be resolved if the carbon cntent of the single-phase material is taken into account. Analytical expressions are also given that describe the temperature variation of the phase boundaries for these phases. 16 figures

Analysis of X-ray adsorption edges: L<sub>2,3sub> edge of FeCl<sub>4sub>^-

Energy Technology Data Exchange (ETDEWEB)

Bagus, Paul S. [Department of Chemistry, University of North Texas, Denton, Texas 76203-5017, USA; Nelin, Connie J. [Consultant, Austin, Texas 78730, USA; Ilton, Eugene S. [Pacific Northwest National Laboratory, Richland, Washington 99352, USA; Sassi, Michel J. [Pacific Northwest National Laboratory, Richland, Washington 99352, USA; Rosso, Kevin M. [Pacific Northwest National Laboratory, Richland, Washington 99352, USA

2017-12-14

We describe a detailed analysis of the features of the X-ray adsorption spectra at the Fe L<sub>2,3sub> edge of FeCl<sub>4sub>. The objective of this analysis is to explain the origin of the complex features in relation to properties of the wavefunctions, especially for the excited states. These properties include spin-orbit and ligand field splittings where a novel aspect of the dipole selection rules is applied to understand the influence of these splittings on the spectra. We also explicitly take account of the intermediate coupling of the open core and valence shell electrons. Our analysis also includes comparison of theory and experiment for the Fe L<sub>2,3sub> edge and comparison of theoretical predictions for the Fe³⁺ cation and FeCl<sub>4sub>-. The electronic structure is obtained from theoretical wavefunctions for the ground and excited states.

Parametric system studies of candidate TF coil system options for the Tokamak Fusion Core Experiment (TFCX)

International Nuclear Information System (INIS)

Reiersen, W.T.; Flanagan, C.A.; Miller, J.B.

1983-01-01

System studies were performed to determine the sensitivity of hybrid and superconducting toroidal field (TF) coil system options to maximum field at the TF coil and to field enhancement due to resistive insert coils. The studies were performed using Tokamak Fusion Core Experiment (TFCX) design assumptions, guidelines, and criteria and involved iterative execution of the Fusion Engineering Design Center (FEDC) systems code, magnetohydrodynamics (MHD) equilibrium code, and EFFI (a code to evaluate magnetic field strength). The results indicate that for TFCX with no minimum wall loading specified, a design point chosen solely on the basis of cost would likely be in the low-field region of design space where the cost advantage of hybrids is least apparent. However, as the desired neutron wall loading increases, the hybrid option suggests an increasing cost advantage over the all-superconducting option; this cost advantage is countered by increased complexity in design -- particularly in assembly and maintenance

Parametric system studies of candidate TF coil system options for the Tokamak Fusion Core Experiment (TFCX)

International Nuclear Information System (INIS)

Reiersen, W.T.; Flanagan, C.A.; Miller, J.B.

1983-01-01

System studies were performed to determine the sensitivity of hybrid and superconducting toroidal field (TF) coil system options to maximum field at the TF coil and to field enhancement due to resistive insert coils. The studies were performed using Tokamak Fusion Core Experiment (TFCX) design assumptions, guidelines, and criteria and involved iterative execution of the Fusion Engineering Design Center (FEDC) systems code, magnetohydrodynamics (MHD) equilibrium code, and EFFI (a code to evaluate magnetic field strength). The results indicate that for TFCX with no minimum wall loading specified, a design point chosen solely on the basis of cost would likely be in the low-field region of design space where the cost advantage of hybrids is least apparent. However, as the desired neutron wall loading increases, the hybrid option suggests an increasing cost advantage over the all-superconducting option; this cost advantage is countered by increased complexity in design - particularly in assembly and maintenance

Crucial thermophysical mechanisms for the safety of CO{sub 2} geological storage; Mecanismes thermophysiques determinant la securite du stockage geologique du CO{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Chiquet, P

2006-09-15

CO{sub 2} underground storage as an option for reducing greenhouse gases emissions consists of trapping industrial CO{sub 2} and injecting it into deep geological formations such as saline aquifers and hydrocarbons reservoirs. This study aims at assessing leakage processes and evaluating storage capacities. To this end, two leakage phenomena were considered, cap-rock capillary breakthrough and diffusional transport. The former involves interfacial properties of the brine/CO{sub 2}/mineral system: brine/CO{sub 2} interfacial tension and rock wettability under dense CO{sub 2}. Chapter one presents a series of IFT measurements performed at temperatures and pressures up to 4 5 MPa-110 C. Results show a great decrease of IFT with pressure in the 0-to-20 MPa range beyond what it tends to stabilize at values in the order of 25-30 mN.m{sup -1}. Chapter two deals with rock wettability. Dynamic contact angles were measured on muscovite mica and quartz up to 10 MPa. Results highlight an alteration of wettability with pressure that was accounted for by means of a DLVO based model. Direct capillary entry pressures on a clay stone sample are proposed in chapter three. Diffusion, is treated in chapter four. We used the Taylor dispersion method to measure D up to 40 MPa. Results indicate low values in the order of 2.10{sup -9} m{sup 2}.s{sup -1}. Chapter five discusses the consequences of the previous parameters in terms of storage capacity. (author)

Burnup Measurement of Spent Fuel Assembly by CZT-based Gamma-ray Spectroscopy for Input Nuclear Material Accountancy of Pyroprocessing

International Nuclear Information System (INIS)

Seo, Hee; Oh, Jong-Myeong; Shin, Hee-Sung; Kim, Ho-Dong; Lee, Seung-Kyu; Park, Se-Hwan

2013-06-01

Input nuclear material accountancy is crucial for a pyroprocessing facility safeguards. Until a direct Pu measurement technique is established, an indirect method based on code calculations with burnup measurement and neutron counting for 244 Cm could be a practical option. Burnup can be determined by destructive analysis (DA) for final dispositive accuracy or by nondestructive assay (NDA) for near-real time accountancy. In the present study, an underwater burnup measurement system based on gamma-ray spectroscopy with the CZT detector was developed and tested on a spent fuel assembly. Burnup was determined according to the 134 Cs/ 137 Cs activity ratio with efficiency correction by Geant4 Monte Carlo simulations. The activity ratio as a function of burnup was obtained by ORIGEN calculations. The measured burnup error was 8.6%, which was within the measurement uncertainty. It is expected that the underwater burnup measurement system could fulfill an important role as a means of near-real time accountancy at a future pyroprocessing facility. (authors)

Radiological protection criteria risk assessments for waste disposal options

International Nuclear Information System (INIS)

Hill, M.D.

1982-01-01

Radiological protection criteria for waste disposal options are currently being developed at the National Radiological Protection Board (NRPB), and, in parallel, methodologies to be used in assessing the radiological impact of these options are being evolved. The criteria and methodologies under development are intended to apply to all solid radioactive wastes, including the high-level waste arising from reprocessing of spent nuclear fuel (because this waste will be solidified prior to disposal) and gaseous or liquid wastes which have been converted to solid form. It is envisaged that the same criteria will be applied to all solid waste disposal options, including shallow land burial, emplacement on the ocean bed (sea dumping), geological disposal on land and sub-seabed disposal

Ocean CO{sub 2} disposal

Energy Technology Data Exchange (ETDEWEB)

Shindo, Yuji; Hakuta, Toshikatsu [National Inst. of Materials and Chemical Research, AIST, MITI, Higashi, Tsukuba, Ibaraki (Japan)

1993-12-31

Most countries in the world will continue to depend on fossil fuels for their main energy at least for half a country, even in the confrontation with the threat of global warming. This indicates that the development of CO{sub 2} removal technologies such as recovering CO{sub 2} from flue gases and sequestering it of in the deep oceans or subterranean sites is necessary, at least until non-fossil fuel dependent society is developed. Ocean CO{sub 2} disposal is one of the promising options for the sequestration of CO{sub 2} recovered from flue gases. Oceans have sufficient capacity to absorb all the CO{sub 2} emitted in the world. It is very significant to research and develop the technologies for ocean CO{sub 2} disposal.

Electron paramagnetic resonance investigations of alpha-Al sub 2 O sub 3 powders doped with Fe sup 3 sup + ions: experiments and simulations

CERN Document Server

Buzare, J Y; Klein, J; Scholz, G; Stoesser, R; Nofz, M

2002-01-01

Electron paramagnetic resonance (EPR) of Fe sup 3 sup + ions in Al sub 2 O sub 3 is studied in powder samples prepared by different routes and/or modified by thermal or mechanical treatments, with different doping levels and grain sizes. The measurements are performed in various frequency bands (S, X, K, Q and W) and with bimodal detection in X-band. Simulations of the spectra are achieved with a code designed for computing EPR powder spectra described by any spin Hamiltonian including second-, fourth-and sixth-order ZFS terms (S <= 7/2). The linewidths, intensities and lineshapes are accounted for. The lineshape is Gaussian at low Fe sup 3 sup + concentration whereas it is Lorentzian for higher concentration. The linewidths are interpreted as the superimposition of three main contributions: intrinsic linewidth, dipolar broadening and broadening due to lattice imperfections. The latter is tentatively interpreted in terms of quadrupolar spin Hamiltonian parameter distributions treated using first-order pert...

Evaluating the Coding and Workload Accounting Improvement Initiative of Madigan Army Medical Center

National Research Council Canada - National Science Library

Bewley, Lee W; Bender, Brian J

2007-01-01

... documentation, provider coding accuracy and education, and clinic electronic medical record (AHLTA) usage. The desired end state of the CWAI is improved medical documentation and coding accuracy at MAMC...

Energy development and CO<sub>2sub> emissions in China

Energy Technology Data Exchange (ETDEWEB)

Xi, Xiaolin [Carnegie-Mellon Univ., Pittsburgh, PA (United States)

1993-03-01

The objective of this research is to provide a better understanding of future Chinese energy development and CO<sub>2sub> emissions from burning fossil fuels. This study examines the current Chinese energy system, estimates CO<sub>2sub> emissions from burning fossil fuels and projects future energy use and resulting CO<sub>2sub> emissions up to the year of 2050. Based on the results of the study, development strategies are proposed and policy implications are explored. This study first develops a Base scenario projection of the Chinese energy development based upon a sectoral analysis. The Base scenario represents a likely situation of future development, but many alternatives are possible. To explore this range of alternatives, a systematic uncertainty analysis is performed. The Base scenario also represents an extrapolation of current policies and social and economic trends. As such, it is not necessarily the economically optimal future course for Chinese energy development. To explore this issue, an optimization analysis is performed. For further understanding of developing Chinese energy system and reducing CO<sub>2sub> emissions, a Chinese energy system model with 84 supply and demand technologies has been constructed in MARKAL, a computer LP optimization program for energy systems. Using this model, various technological options and economic aspects of energy development and CO<sub>2sub> emissions reduction in China during the 1985-2020 period are examined.

Sub-band/transform compression of video sequences

Science.gov (United States)

Sauer, Ken; Bauer, Peter

1992-01-01

The progress on compression of video sequences is discussed. The overall goal of the research was the development of data compression algorithms for high-definition television (HDTV) sequences, but most of our research is general enough to be applicable to much more general problems. We have concentrated on coding algorithms based on both sub-band and transform approaches. Two very fundamental issues arise in designing a sub-band coder. First, the form of the signal decomposition must be chosen to yield band-pass images with characteristics favorable to efficient coding. A second basic consideration, whether coding is to be done in two or three dimensions, is the form of the coders to be applied to each sub-band. Computational simplicity is of essence. We review the first portion of the year, during which we improved and extended some of the previous grant period's results. The pyramid nonrectangular sub-band coder limited to intra-frame application is discussed. Perhaps the most critical component of the sub-band structure is the design of bandsplitting filters. We apply very simple recursive filters, which operate at alternating levels on rectangularly sampled, and quincunx sampled images. We will also cover the techniques we have studied for the coding of the resulting bandpass signals. We discuss adaptive three-dimensional coding which takes advantage of the detection algorithm developed last year. To this point, all the work on this project has been done without the benefit of motion compensation (MC). Motion compensation is included in many proposed codecs, but adds significant computational burden and hardware expense. We have sought to find a lower-cost alternative featuring a simple adaptation to motion in the form of the codec. In sequences of high spatial detail and zooming or panning, it appears that MC will likely be necessary for the proposed quality and bit rates.

Tripoli-3: monte Carlo transport code for neutral particles - version 3.5 - users manual

International Nuclear Information System (INIS)

Vergnaud, Th.; Nimal, J.C.; Chiron, M.

2001-01-01

The TRIPOLI-3 code applies the Monte Carlo method to neutron, gamma-ray and coupled neutron and gamma-ray transport calculations in three-dimensional geometries, either in steady-state conditions or having a time dependence. It can be used to study problems where there is a high flux attenuation between the source zone and the result zone (studies of shielding configurations or source driven sub-critical systems, with fission being taken into account), as well as problems where there is a low flux attenuation (neutronic calculations -- in a fuel lattice cell, for example -- where fission is taken into account, usually with the calculation on the effective multiplication factor, fine structure studies, numerical experiments to investigate methods approximations, etc). TRIPOLI-3 has been operational since 1995 and is the version of the TRIPOLI code that follows on from TRIPOLI-2; it can be used on SUN, RISC600 and HP workstations and on PC using the Linux or Windows/NT operating systems. The code uses nuclear data libraries generated using the THEMIS/NJOY system. The current libraries were derived from ENDF/B6 and JEF2. There is also a response function library based on a number of evaluations, notably the dosimetry libraries IRDF/85, IRDF/90 and also evaluations from JEF2. The treatment of particle transport is the same in version 3.5 as in version 3.4 of the TRIPOLI code; but the version 3.5 is more convenient for preparing the input data and for reading the output. The french version of the user's manual exists. (authors)

Optimization of FRAP uncertainty analysis option

International Nuclear Information System (INIS)

Peck, S.O.

1979-10-01

The automated uncertainty analysis option that has been incorporated in the FRAP codes (FRAP-T5 and FRAPCON-2) provides the user with a means of obtaining uncertainty bands on code predicted variables at user-selected times during a fuel pin analysis. These uncertainty bands are obtained by multiple single fuel pin analyses to generate data which can then be analyzed by second order statistical error propagation techniques. In this process, a considerable amount of data is generated and stored on tape. The user has certain choices to make regarding which independent variables are to be used in the analysis and what order of error propagation equation should be used in modeling the output response. To aid the user in these decisions, a computer program, ANALYZ, has been written and added to the uncertainty analysis option package. A variety of considerations involved in fitting response surface equations and certain pit-falls of which the user should be aware are discussed. An equation is derived expressing a residual as a function of a fitted model and an assumed true model. A variety of experimental design choices are discussed, including the advantages and disadvantages of each approach. Finally, a description of the subcodes which constitute program ANALYZ is provided

Summary of ENDF/B pre-processing codes

International Nuclear Information System (INIS)

Cullen, D.E.

1981-12-01

This document contains the summary documentation for the ENDF/B pre-processing codes: LINEAR, RECENT, SIGMA1, GROUPIE, EVALPLOT, MERGER, DICTION, CONVERT. This summary documentation is merely a copy of the comment cards that appear at the beginning of each programme; these comment cards always reflect the latest status of input options, etc. For the latest published documentation on the methods used in these codes see UCRL-50400, Vol.17 parts A-E, Lawrence Livermore Laboratory (1979)

FLICA-4 (version 1). A computer code for three dimensional thermal analysis of nuclear reactor cores

International Nuclear Information System (INIS)

Raymond, P.; Allaire, G.; Boudsocq, G.; Caruge, D.; Gramont, T. de; Toumi, I.

1995-01-01

FLICA-4 is a thermal-hydraulic computer code, developed at the French Atomic Energy Commission (CEA) for three-dimensional steady-state or transient two-phase flow, and aimed at design and safety thermal analysis of nuclear reactor cores. It is available for various UNIX workstations and CRAY computers under UNICOS.It is based on four balance equations which include three balance equations for the mixture and a mass balance equation for the less concentrated phase which allows for the calculation of non equilibrium flows such as sub-cooled boiling and superheated steam. A drift velocity model takes into account the velocity unbalance between phases. The equations are solved using a finite volume numerical scheme. Typical running time, specific features (coupling with other codes) and auxiliary programs are presented. 1 tab., 9 refs

Variable Rate, Adaptive Transform Tree Coding Of Images

Science.gov (United States)

Pearlman, William A.

1988-10-01

A tree code, asymptotically optimal for stationary Gaussian sources and squared error distortion [2], is used to encode transforms of image sub-blocks. The variance spectrum of each sub-block is estimated and specified uniquely by a set of one-dimensional auto-regressive parameters. The expected distortion is set to a constant for each block and the rate is allowed to vary to meet the given level of distortion. Since the spectrum and rate are different for every block, the code tree differs for every block. Coding simulations for target block distortion of 15 and average block rate of 0.99 bits per pel (bpp) show that very good results can be obtained at high search intensities at the expense of high computational complexity. The results at the higher search intensities outperform a parallel simulation with quantization replacing tree coding. Comparative coding simulations also show that the reproduced image with variable block rate and average rate of 0.99 bpp has 2.5 dB less distortion than a similarly reproduced image with a constant block rate equal to 1.0 bpp.

Pawnee Nation Energy Option Analyses

Energy Technology Data Exchange (ETDEWEB)

Matlock, M.; Kersey, K.; Riding In, C.

2009-07-31

In 2003, the Pawnee Nation leadership identified the need for the tribe to comprehensively address its energy issues. During a strategic energy planning workshop a general framework was laid out and the Pawnee Nation Energy Task Force was created to work toward further development of the tribe’s energy vision. The overarching goals of the “first steps” project were to identify the most appropriate focus for its strategic energy initiatives going forward, and to provide information necessary to take the next steps in pursuit of the “best fit” energy options. Based on the request of Pawnee Nation’s Energy Task Force the research team, consisting Tribal personnel and Summit Blue Consulting, focused on a review of renewable energy resource development potential, funding sources and utility organizational along with energy savings options. Elements of the energy demand forecasting and characterization and demand side options review remained in the scope of work, but were only addressed at a high level. Description of Activities Performed Renewable Energy Resource Development Potential The research team reviewed existing data pertaining to the availability of biomass (focusing on woody biomass, agricultural biomass/bio-energy crops, and methane capture), solar, wind and hydropower resources on the Pawnee-owned lands. Using these data, combined with assumptions about costs and revenue streams, the research team performed preliminary feasibility assessments for each resource category. The research team also reviewed available funding resources and made recommendations to Pawnee Nation highlighting those resources with the greatest potential for financially-viable development, both in the near-term and over a longer time horizon. Energy Efficiency Options While this was not a major focus of the project, the research team highlighted common strategies for reducing energy use in buildings. The team also discussed the benefits of adopting a building energy code and

Quantum chemical estimation of sorption/desorption of H{sub 2} and H{sub 2}O (gas) at the plasma-wall interface

Energy Technology Data Exchange (ETDEWEB)

Nagasaki, Shinya; Tsushima, Satoru; Tanaka, Masataka; Umemura, Yasuhiro [Tokyo Univ. (Japan). Faculty of Engineering

1996-10-01

By using MOPAC Code, we estimated the charge density of SiO{sub 2}-Al{sub 2}O{sub 3}-SiO{sub 2} metal oxide. We could find that the such quantum chemical calculation is a fruitful tool for understanding the plasma-wall interactions from the microscopic point of view. (author)

75 FR 62345 - Minimum Balance Requirement and Automatic Replenishment Option for Deposit Account Holders

Science.gov (United States)

2010-10-08

... may establish a deposit account, make advance deposits into that account, and charge copyright fees... for copyright registration paid for by deposit account debits be submitted using the electronic... assesses service charges for deposit account overdrafts ($165) and dishonored deposit account replenishment...

Non-binary unitary error bases and quantum codes

Energy Technology Data Exchange (ETDEWEB)

Knill, E.

1996-06-01

Error operator bases for systems of any dimension are defined and natural generalizations of the bit-flip/ sign-change error basis for qubits are given. These bases allow generalizing the construction of quantum codes based on eigenspaces of Abelian groups. As a consequence, quantum codes can be constructed form linear codes over {ital Z}{sub {ital n}} for any {ital n}. The generalization of the punctured code construction leads to many codes which permit transversal (i.e. fault tolerant) implementations of certain operations compatible with the error basis.

LDPC coded OFDM over the atmospheric turbulence channel.

Science.gov (United States)

Djordjevic, Ivan B; Vasic, Bane; Neifeld, Mark A

2007-05-14

Low-density parity-check (LDPC) coded optical orthogonal frequency division multiplexing (OFDM) is shown to significantly outperform LDPC coded on-off keying (OOK) over the atmospheric turbulence channel in terms of both coding gain and spectral efficiency. In the regime of strong turbulence at a bit-error rate of 10(-5), the coding gain improvement of the LDPC coded single-side band unclipped-OFDM system with 64 sub-carriers is larger than the coding gain of the LDPC coded OOK system by 20.2 dB for quadrature-phase-shift keying (QPSK) and by 23.4 dB for binary-phase-shift keying (BPSK).

Theoretical conditions for validity in accounting performance measurement

DEFF Research Database (Denmark)

Nørreklit, Hanne; Nørreklit, Lennart; Mitchell, Falconer

2007-01-01

The concept of truth is a foundation upon which the accounting profession has built its reputation. The need for truth in accounting is enshrined in ethical codes, accounting regulations, authoritative texts and, of course, the auditor's assignation of a "true and fair view"....

An Assessment of Geological Carbon Storage Options in the Illinois Basin: Validation Phase

Energy Technology Data Exchange (ETDEWEB)

Finley, Robert

2012-12-01

The Midwest Geological Sequestration Consortium (MGSC) assessed the options for geological carbon dioxide (CO{sub 2}) storage in the 155,400 km{sup 2} (60,000 mi{sup 2}) Illinois Basin, which underlies most of Illinois, western Indiana, and western Kentucky. The region has annual CO{sub 2} emissions of about 265 million metric tonnes (292 million tons), primarily from 122 coal-fired electric generation facilities, some of which burn almost 4.5 million tonnes (5 million tons) of coal per year (U.S. Department of Energy, 2010). Validation Phase (Phase II) field tests gathered pilot data to update the Characterization Phase (Phase I) assessment of options for capture, transportation, and storage of CO{sub 2} emissions in three geological sink types: coal seams, oil fields, and saline reservoirs. Four small-scale field tests were conducted to determine the properties of rock units that control injectivity of CO{sub 2}, assess the total storage resources, examine the security of the overlying rock units that act as seals for the reservoirs, and develop ways to control and measure the safety of injection and storage processes. The MGSC designed field test operational plans for pilot sites based on the site screening process, MVA program needs, the selection of equipment related to CO{sub 2} injection, and design of a data acquisition system. Reservoir modeling, computational simulations, and statistical methods assessed and interpreted data gathered from the field tests. Monitoring, Verification, and Accounting (MVA) programs were established to detect leakage of injected CO{sub 2} and ensure public safety. Public outreach and education remained an important part of the project; meetings and presentations informed public and private regional stakeholders of the results and findings. A miscible (liquid) CO{sub 2} flood pilot project was conducted in the Clore Formation sandstone (Mississippian System, Chesterian Series) at Mumford Hills Field in Posey County, southwestern

Exploration of R<sub>2sub>XM>2sub> (R=Sc, Y, Ti, Zr, Hf, rare earth; X=main group element; M=transition metal, Si, Ge): Structural Motifs, the novel Compound Gd<sub>2sub>AlGe>2sub> and Analysis of the U<sub>3sub>Si>2sub> and Zr<sub>3sub>Al>2 sub>Structure Types

Energy Technology Data Exchange (ETDEWEB)

McWhorter, Sean William [Iowa State Univ., Ames, IA (United States)

2006-01-01

electrons can be accounted for. A series of electronic structure calculations were performed on models with the U<sub>3sub>Si>2sub> and Zr<sub>3sub>Al>2sub> structures, using Zr and A1 as the building blocks. The starting point for these models was the U<sub>3sub>Si>2sub> structure, and models were created to simulate the transition from the idealized U<sub>3sub>Si>2sub> structure to the distorted Zr<sub>3sub>Al>2sub> structure. Analysis of the band structures of the models has shown that the transition from the U<sub>3sub>Si>2sub> structure to the Zr<sub>3sub>Al>2sub> structure lifts degeneracies along the Λ → Z direction, indicating a Peierls-type mechanism for the displacement occurring in the positions of the Zr atoms.

Tripoli-3: monte Carlo transport code for neutral particles - version 3.5 - users manual; Tripoli-3: code de transport des particules neutres par la methode de monte carlo - version 3.5 - manuel d'utilisation

Energy Technology Data Exchange (ETDEWEB)

Vergnaud, Th; Nimal, J C; Chiron, M

2001-07-01

The TRIPOLI-3 code applies the Monte Carlo method to neutron, gamma-ray and coupled neutron and gamma-ray transport calculations in three-dimensional geometries, either in steady-state conditions or having a time dependence. It can be used to study problems where there is a high flux attenuation between the source zone and the result zone (studies of shielding configurations or source driven sub-critical systems, with fission being taken into account), as well as problems where there is a low flux attenuation (neutronic calculations -- in a fuel lattice cell, for example -- where fission is taken into account, usually with the calculation on the effective multiplication factor, fine structure studies, numerical experiments to investigate methods approximations, etc). TRIPOLI-3 has been operational since 1995 and is the version of the TRIPOLI code that follows on from TRIPOLI-2; it can be used on SUN, RISC600 and HP workstations and on PC using the Linux or Windows/NT operating systems. The code uses nuclear data libraries generated using the THEMIS/NJOY system. The current libraries were derived from ENDF/B6 and JEF2. There is also a response function library based on a number of evaluations, notably the dosimetry libraries IRDF/85, IRDF/90 and also evaluations from JEF2. The treatment of particle transport is the same in version 3.5 as in version 3.4 of the TRIPOLI code; but the version 3.5 is more convenient for preparing the input data and for reading the output. The french version of the user's manual exists. (authors)

Does an elevated CO<sub>2sub> concentration decrease dark respiration in trees? Final technical report

Energy Technology Data Exchange (ETDEWEB)

Long, Stephen [Univ. of Illinois, Urbana-Champaign, IL (United States)

2003-12-31

Averaged across many previous investigations, doubling the CO<sub>2sub> concentration ([CO<sub>2sub>]) has frequently been reported to cause an instantaneous reduction of leaf dark respiration measured as CO<sub>2sub> efflux. No known mechanism accounts for this effect. While four recent studies have shown that the measurement of respiratory CO<sub>2sub> efflux is prone to experimental artifacts that could account for the reported response, papers published since the start of the current research continue to report an instantaneous depression of respiratory CO<sub>2sub> efflux by elevation of [CO<sub>2sub>]. Here, these artifacts are avoided by use of a high-resolution dual channel oxygen analyzer within an open gas exchange system to measure respiratory 02 uptake in normal air. Leaf 02 uptake was determined in response to instantaneous elevation of [CO<sub>2sub>] in nine contrasting species and to long-term elevation in seven species from four of the DOE-sponsored long-term elevated [CO<sub>2sub>] field experiments. Over one thousand separate measurements of respiration failed to reveal any decrease in respiratory 02 uptake with an instantaneous increase in [CO<sub>2sub>]. Respiration was found insensitive not only to doubling [CO<sub>2sub>], but also to a five-fold increase and to decrease to zero.

INGEN: a general-purpose mesh generator for finite element codes

International Nuclear Information System (INIS)

Cook, W.A.

1979-05-01

INGEN is a general-purpose mesh generator for two- and three-dimensional finite element codes. The basic parts of the code are surface and three-dimensional region generators that use linear-blending interpolation formulas. These generators are based on an i, j, k index scheme that is used to number nodal points, construct elements, and develop displacement and traction boundary conditions. This code can generate truss elements (2 modal points); plane stress, plane strain, and axisymmetry two-dimensional continuum elements (4 to 8 nodal points); plate elements (4 to 8 nodal points); and three-dimensional continuum elements (8 to 21 nodal points). The traction loads generated are consistent with the element generated. The expansion--contraction option is of special interest. This option makes it possible to change an existing mesh such that some regions are refined and others are made coarser than the original mesh. 9 figures

Magnetic and magnetocaloric properties of amorphous Y{sub 3}Fe{sub 5}O{sub 12} compound

Energy Technology Data Exchange (ETDEWEB)

Nóbrega, E.P., E-mail: pilad@cbpf.br; Costa, S.S.; Alvarenga, T.S.T.; Alho, B.P.; Caldas, A.; Ribeiro, P.O.; Sousa, V.S.R de; Oliveira, N.A. de; Ranke, P.J. von

2017-01-15

We report a theoretical model formed by two coupled magnetic sublattices of localized spins in the presence of an applied magnetic field to investigate the magnetic characteristics and magnetocaloric properties of amorphous yttrium iron garnet. The magnetic state equation is based on Handrich–Kobe´s theory, where the amorphization is taken into account by introducing fluctuations in the exchange parameters. Experimental results report that Y{sub 3}Fe{sub 5}O{sub 12} presents a structural phase transition from crystalline to amorphous caused by a variation of external pressure. This phase transition on Y{sub 3}Fe{sub 5}O{sub 12} leads to interesting results in the magnetic properties and magnetocaloric quantities. - Highlights: • Study of magnetic and magnetocaloric properties of amorphous Y{sub 3}Fe{sub 5}O{sub 12} compound. • Theoretical model formed by two coupled magnetic sublattices of localized spins in the presence of an applied magnetic field. • The influence of crystalline/amorphous transition on the magnetocaloric effect.

ECONOMIC EVALUATION OF CO2 STORAGE AND SINK ENHANCEMENT OPTIONS

Energy Technology Data Exchange (ETDEWEB)

Bert Bock; Richard Rhudy; Howard Herzog; Michael Klett; John Davison; Danial G. De La Torre Ugarte; Dale Simbeck

2003-02-01

This project developed life-cycle costs for the major technologies and practices under development for CO{sub 2} storage and sink enhancement. The technologies evaluated included options for storing captured CO{sub 2} in active oil reservoirs, depleted oil and gas reservoirs, deep aquifers, coal beds, and oceans, as well as the enhancement of carbon sequestration in forests and croplands. The capture costs for a nominal 500 MW{sub e} integrated gasification combined cycle plant from an earlier study were combined with the storage costs from this study to allow comparison among capture and storage approaches as well as sink enhancements.

Scope Complexity Options Risks Excursions (SCORE) Version 3.0 Mathematical Description.

Energy Technology Data Exchange (ETDEWEB)

Gearhart, Jared Lee [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Samberson, Jonell Nicole [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Shettigar, Subhasini [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jungels, John [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Welch, Kimberly M. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Jones, Dean A. [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2017-03-01

The purpose of the Scope, Complexity, Options, Risks, Excursions (SCORE) model is to estimate the relative complexity of design variants of future warhead options. The results of this model allow those considering these options to understand the complexity tradeoffs between proposed warhead options. The core idea of SCORE is to divide a warhead option into a well- defined set of scope elements and then estimate the complexity of each scope element against a well understood reference system. The uncertainty associated with estimates can also be captured. A weighted summation of the relative complexity of each scope element is used to determine the total complexity of the proposed warhead option or portions of the warhead option (i.e., a National Work Breakdown Structure code). The SCORE analysis process is a growing multi-organizational Nuclear Security Enterprise (NSE) effort, under the management of the NA- 12 led Enterprise Modeling and Analysis Consortium (EMAC), that has provided the data elicitation, integration and computation needed to support the out-year Life Extension Program (LEP) cost estimates included in the Stockpile Stewardship Management Plan (SSMP).

Magnetic field-induced elastic bending in bilayers of Tb{sub 1−x}Dy{sub x}Fe{sub 2−y} and Pb(Zr{sub 1−z}Ti{sub z})O{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Jin, Tao; Qichao, Wu; Ning, Zhang, E-mail: zhangning@njnu.edu.cn

2014-09-01

Magnetic field-induced strain in the magnetoelectric bilayers of Tb{sub 1−x}Dy{sub x}Fe{sub 2−y} and Pb(Zr{sub 1−z}Ti{sub z})O{sub 3} was studied. A butterfly shaped strain curve was observed on the surface of Pb(Zr{sub 1−z}Ti{sub z})O{sub 3}. The shape of the strain curve was found to be related to the sample thickness and the volume fraction occupied by the ferroelectrics in the bilayer. Theoretical analysis and experimental results showed that magnetoelastic bending in the bilayer composites was largely responsible for the butterfly strain curve. - Highlights: • Butterfly strain curves were observed on the PZT surface for bilayers of TDF and PZT. • The strain curve is related to the sample thickness and the volume fraction of the PZT. • A physics model depicting the field-controlled bending of the bilayers was developed. • The magnetoelastic bending was found to account for the butterfly strain curve.

FOOD II: an interactive code for calculating concentrations of radionuclides in food products

International Nuclear Information System (INIS)

Zach, R.

1978-11-01

An interactive code, FOOD II, has been written in FORTRAN IV for the PDP 10 to allow calculation of concentrations of radionuclides in food products and internal doses to man under chronic release conditions. FOOD II uses models unchanged from a previous code, FOOD, developed at Battelle, Pacific Northwest Laboratories. The new code has different input and output features than FOOD and a number of options have been added to increase flexibility. Data files have also been updated. FOOD II takes into account contamination of vegetation by air and irrigation water containing radionuclides. Contamination can occur simultaneously by air and water. Both direct deposition of radionuclides on leaves, and their uptake from soil are possible. Also, animals may be contaminated by ingestion of vegetation and drinking water containing radionuclides. At present, FOOD II provides selection of 14 food types, 13 diets and numerous radionuclides. Provisions have been made to expand all of these categories. Six additional contaminated food products can also be entered directly into the dose model. Doses may be calculated for the total body and six internal organs. Summaries of concentrations in food products and internal doses to man can be displayed at a local terminal or at an auxiliary high-speed printer. (author)

Development of System Based Code: Case Study of Life-Cycle Margin Evaluation

International Nuclear Information System (INIS)

Tai Asayama; Masaki Morishita; Masanori Tashimo

2006-01-01

For a leap of progress in structural deign of nuclear plant components, The late Professor Emeritus Yasuhide Asada proposed the System Based Code. The key concepts of the System Based Code are; (1) life-cycle margin optimization, (2) expansion of technical options as well as combinations of technical options beyond the current codes and standards, and (3) designing to clearly defined target reliabilities. Those concepts are very new to most of the nuclear power plant designers who are naturally obliged to design to current codes and standards; the application of the concepts of the System Based Code to design will lead to entire change of practices that designers have long been accustomed to. On the other hand, experienced designers are supposed to have expertise that can support and accelerate the development of the System Based Code. Therefore, interfacing with experienced designers is of crucial importance for the development of the System Based Code. The authors conducted a survey on the acceptability of the System Based Code concept. The results were analyzed from the possibility of improving structural design both in terms of reliability and cost effectiveness by the introduction of the System Based Code concept. It was concluded that the System Based Code is beneficial for those purposes. Also described is the expertise elicited from the results of the survey that can be reflected to the development of the System Based Code. (authors)

The thermal expansion coefficient of Ga/sub x/In/sub 1-x/As/sub y/P/sub 1-y/ epitaxial layers grown on InP substrate

International Nuclear Information System (INIS)

Pietsch, U.; Marlow, D.

1986-01-01

The amount of the measured room temperature thermal expansion coefficient of tetragonal strained layers grown lattice matched on the InP substrate used is about 30% greater the expected one for a cubic 'relaxed' material. This issue has to be taken into account for the determination of the composition of the quarternary Ga/sub x/In/sub 1-x/As/sub y/P/sub 1-y/ layers from both X-ray and photoluminescence data as well as for the estimation of the thermally created stress field of optoelectronic devices. (author)

Managing vulnerability to drought and enhancing livelihood resilience in sub-Saharan Africa: Technological, institutional and policy options

Directory of Open Access Journals (Sweden)

Bekele Shiferaw

2014-06-01

Full Text Available Agriculture and the economies of Sub-Saharan Africa (SSA are highly sensitive to climatic variability. Drought, in particular, represents one of the most important natural factors contributing to malnutrition and famine in many parts of the region. The overall impact of drought on a given country/region and its ability to recover from the resulting social, economic and environmental impacts depends on several factors. The economic, social and environmental impacts of drought are huge in SSA and the national costs and losses incurred threaten to undermine the wider economic and development gains made in the last few decades in the region. There is an urgent need to reduce the vulnerability of countries to climate variability and to the threats posed by climate change. This paper attempts to highlight the challenges of drought in SSA and reviews the current drought risk management strategies, especially the promising technological and policy options for managing drought risks to protect livelihoods and reduce vulnerability. The review suggests the possibilities of several ex ante and ex post drought management strategies in SSA although their effectiveness depends on agro-climatic and socio-economic conditions. Existing technological, policy and institutional risk management measures need to be strengthened and integrated to manage drought ex ante and to minimize the ex post negative effects for vulnerable households and regions. A proactive approach that combines promising technological, institutional and policy solutions to manage the risks within vulnerable communities implemented by institutions operating at different levels (community, sub-national, and national is considered to be the way forward for managing drought and climate variability.

"ON ALGEBRAIC DECODING OF Q-ARY REED-MULLER AND PRODUCT REED-SOLOMON CODES"

Energy Technology Data Exchange (ETDEWEB)

SANTHI, NANDAKISHORE [Los Alamos National Laboratory

2007-01-22

We consider a list decoding algorithm recently proposed by Pellikaan-Wu for q-ary Reed-Muller codes RM{sub q}({ell}, m, n) of length n {le} q{sup m} when {ell} {le} q. A simple and easily accessible correctness proof is given which shows that this algorithm achieves a relative error-correction radius of {tau} {le} (1-{radical}{ell}q{sup m-1}/n). This is an improvement over the proof using one-point Algebraic-Geometric decoding method given in. The described algorithm can be adapted to decode product Reed-Solomon codes. We then propose a new low complexity recursive aJgebraic decoding algorithm for product Reed-Solomon codes and Reed-Muller codes. This algorithm achieves a relative error correction radius of {tau} {le} {Pi}{sub i=1}{sup m} (1 - {radical}k{sub i}/q). This algorithm is then proved to outperform the Pellikaan-Wu algorithm in both complexity and error correction radius over a wide range of code rates.

Governance codes: facts or fictions? a study of governance codes in colombia1,2

Directory of Open Access Journals (Sweden)

Julián Benavides Franco

2010-10-01

Full Text Available This article studies the effects on accounting performance and financing decisions of Colombian firms after issuing a corporate governance code. We assemble a database of Colombian issuers and test the hypotheses of improved performance and higher leverage after issuing a code. The results show that the firms’ return on assets after the code introduction improves in excess of 1%; the effect is amplified by the code quality. Additionally, the firms leverage increased, in excess of 5%, when the code quality was factored into the analysis. These results suggest that controlling parties commitment to self restrain, by reducing their private benefits and/or the expropriation of non controlling parties, through the code introduction, is indeed an effective measure and that the financial markets agree, increasing the supply of funds to the firms.

Study of CO{sub 2} capture processes in power plants; Etude de procedes de captage du CO{sub 2} dans les centrales thermiques

Energy Technology Data Exchange (ETDEWEB)

Amann, J.M

2007-12-15

The aim of the present study is to assess and compare various processes aiming at recover CO{sub 2} from power plants fed with natural gas (NGCC) and pulverized coal (PC). These processes are post-combustion CO{sub 2} capture using chemical solvents, natural gas reforming for pre-combustion capture by methanol and oxy-fuel combustion with cryogenic recovery of CO{sub 2}. These processes were evaluated using the process software Aspen PlusTM to give some clues for choosing the best option for each type of power plant. With regard to post-combustion, an aqueous solution based on a mixture of amines (N-methyldiethanolamine (MDEA) and triethylene tetramine (TETA)) was developed. Measurements of absorption were carried out between 298 and 333 K in a Lewis cell. CO{sub 2} partial pressure at equilibrium, characteristic of the CO{sub 2} solubility in the solvent, was determined up to 393 K. The solvent performances were compared with respect to more conventional solvents such as MDEA and monoethanolamine (MEA). For oxy-fuel combustion, a recovery process, based on a cryogenic separation of the components of the flue gas, was developed and applied to power plants. The study showed that O{sub 2} purity acts on the CO{sub 2} concentration in the flue gas and thus on the performances of the recovery process. The last option is natural gas reforming with CO{sub 2} pre-combustion capture. Several configurations were assessed: air reforming and oxygen reforming, reforming pressure and dilution of the synthesis gas. The comparison of these various concepts suggests that, in the short and medium term, chemical absorption is the most interesting process for NGCC power plants. For CP power plants, oxy-combustion can be a very interesting option, as well as post-combustion capture by chemical solvents. (author)

Ground Operations Aerospace Language (GOAL). Volume 4: Interpretive code translator

Science.gov (United States)

1973-01-01

This specification identifies and describes the principal functions and elements of the Interpretive Code Translator which has been developed for use with the GOAL Compiler. This translator enables the user to convert a compliled GOAL program to a highly general binary format which is designed to enable interpretive execution. The translator program provides user controls which are designed to enable the selection of various output types and formats. These controls provide a means for accommodating many of the implementation options which are discussed in the Interpretive Code Guideline document. The technical design approach is given. The relationship between the translator and the GOAL compiler is explained and the principal functions performed by the Translator are described. Specific constraints regarding the use of the Translator are discussed. The control options are described. These options enable the user to select outputs to be generated by the translator and to control vrious aspects of the translation processing.

PLUTON: Three-group neutronic code for burnup analysis of isotope generation and depletion in highly irradiated LWR fuel rods

Energy Technology Data Exchange (ETDEWEB)

Lemehov, Sergei E; Suzuki, Motoe [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

2001-08-01

PLUTON is a three-group neutronic code analyzing, as functions of time and burnup, the change of radial profiles, together with average values, of power density, burnup, concentration of trans-uranium elements, plutonium buildup, depletion of fissile elements, and fission product generation in water reactor fuel rod with standard UO{sub 2}, UO{sub 2}-Gd{sub 2}O{sub 3}, inhomogeneous MOX, and UO{sub 2}-ThO{sub 2}. The PLUTON code, which has been designed to be run on Windows PC, has adopted a theoretical shape function of neutron attenuation in pellet, which enables users to perform a very fast and accurate calculation easily. The present code includes the irradiation conditions of the Halden Reactor which gives verification data for the code. The total list of trans-uranium elements included in the calculations consists of {sub 92}U{sup 233-239}, {sub 93}Np{sup 237-239}, {sub 94}Pu{sup 238-243}, {sub 95}Am{sup 241-244} (including isomers), and {sub 96}Cm{sup 242-245}. Poisoning fission products are represented by {sub 54}Xe{sup 131,133,135}, {sub 48}Cd{sup 113}, {sub 62}Sm{sup 149,151,152}, {sub 64}Gd{sup 154-160}, {sub 63}Eu{sup 153,155}, {sub 36}Kr{sup 83,85}, {sub 42}Mo{sup 95}, {sub 43}Tc{sup 99}, {sub 45}Rh{sup 103}, {sub 47}Ag{sup 109}, {sub 53}I{sup 127,129,131}, {sub 55}Cs{sup 133}, {sub 57}La{sup 139}, {sub 59}Pr{sup 141}, {sub 60}Nd{sup 143-150}, {sub 61}Pm{sup 147}. Fission gases and volatiles included in the code are {sub 36}Kr{sup 83-86}, {sub 54}Xe{sup 129-136}, {sub 52}Te{sup 125-130}, {sub 53}I{sup 127-131}, {sub 55}Cs{sup 133-137}, and {sub 56}Ba{sup 135-140}. Verification has been performed up to 83 GWd/tU, and a satisfactory agreement has been obtained. (author)

Tripoli-3: monte Carlo transport code for neutral particles - version 3.5 - users manual; Tripoli-3: code de transport des particules neutres par la methode de monte carlo - version 3.5 - manuel d'utilisation

Energy Technology Data Exchange (ETDEWEB)

Vergnaud, Th.; Nimal, J.C.; Chiron, M

2001-07-01

The TRIPOLI-3 code applies the Monte Carlo method to neutron, gamma-ray and coupled neutron and gamma-ray transport calculations in three-dimensional geometries, either in steady-state conditions or having a time dependence. It can be used to study problems where there is a high flux attenuation between the source zone and the result zone (studies of shielding configurations or source driven sub-critical systems, with fission being taken into account), as well as problems where there is a low flux attenuation (neutronic calculations -- in a fuel lattice cell, for example -- where fission is taken into account, usually with the calculation on the effective multiplication factor, fine structure studies, numerical experiments to investigate methods approximations, etc). TRIPOLI-3 has been operational since 1995 and is the version of the TRIPOLI code that follows on from TRIPOLI-2; it can be used on SUN, RISC600 and HP workstations and on PC using the Linux or Windows/NT operating systems. The code uses nuclear data libraries generated using the THEMIS/NJOY system. The current libraries were derived from ENDF/B6 and JEF2. There is also a response function library based on a number of evaluations, notably the dosimetry libraries IRDF/85, IRDF/90 and also evaluations from JEF2. The treatment of particle transport is the same in version 3.5 as in version 3.4 of the TRIPOLI code; but the version 3.5 is more convenient for preparing the input data and for reading the output. The french version of the user's manual exists. (authors)

Application of RASCAL code for multiunit accident in domestic nuclear sites

Energy Technology Data Exchange (ETDEWEB)

Park, Sang Hyun; Jeong, Seung Young [Korea Institute of Nuclear Safety, Daejeon (Korea, Republic of)

2014-10-15

All of domestic nuclear power plant sites are multiunit site (at least 5 - 6 reactors are operating), so this capability has to be quickly secured for nuclear licensee and institutes responsible for nuclear emergency response. In this study, source term and offsite dose from multiunit event were assessed using a computer code, RASCAL. An emergency exercise scenario was chosen to verify applicability of the codes to domestic nuclear site accident. Employing tools and new features of the code, such as merging more than two individual source terms and source term estimate for long term progression accident, main parameters and information in the scenario, release estimates and dose projections were performed. Radiological releases and offsite doses from multiunit accident were calculated using RASCAL.. A scenario, in which three reactors were damaged coincidently by a great natural disaster, was considered. Surrogate plants were chosen for the code calculation. Source terms of each damaged unit were calculated individually first, and then total source term and integrated offsite dose assessment data was acquired using a source term merge function in the code. Also comparison between LTSBO and LOCA source term estimate options was performed. Differences in offsite doses were caused by release characteristics. From LTSBO option, iodines were released much higher than LOCA. Also LTSBO source term release was delayed and the duration was longer than LOCA. This option would be useful to accidents which progress with much longer time frame than LOCA. RASCAL can be useful tool for radiological consequence assessment in domestic nuclear site accidents.

Nonequilibrium radiation behind a strong shock wave in CO{sub 2}-N{sub 2}

Energy Technology Data Exchange (ETDEWEB)

Rond, C. [Universite de Provence - IUSTI, 5 rue Enrico Fermi, Marseille 13013 (France)], E-mail: rond@coria.fr; Boubert, P.; Felio, J.-M.; Chikhaoui, A. [Universite de Provence - IUSTI, 5 rue Enrico Fermi, Marseille 13013 (France)

2007-11-09

This work presents experiments reproducing plasma re-entry for one trajectory point of a Martian mission. The typical facility to investigate such hypersonic flow is shock tube; here we used the free-piston shock tube TCM2. Measurements of radiative flux behind the shock wave are realized thanks to time-resolved emission spectroscopy which is calibrated in intensity. As CN violet system is the main radiator in near UV-visible range, we have focused our study on its spectrum. Moreover a physical model, based on a multi-temperature kinetic code and a radiative code, for calculation of non equilibrium radiation behind a shock wave is developed for CO{sub 2}-N{sub 2}-Ar mixtures. Comparisons between experiments and calculations show that standard kinetic models (Park, McKenzie) are inefficient to reproduce our experimental results. Therefore we propose new rate coefficients in particular for the dissociation of CO{sub 2}, showing the way towards a better description of the chemistry of the mixture.

Thermoelectric properties of In{sub 0.2}Co{sub 4}Sb{sub 12} skutterudites with embedded PbTe or ZnO nanoparticles

Energy Technology Data Exchange (ETDEWEB)

Chubilleau, C.; Lenoir, B.; Candolfi, C.; Masschelein, P. [Université de Lorraine, CNRS, UMR 7198, Institut Jean Lamour, Parc de Saurupt, 54011 Nancy (France); Dauscher, A., E-mail: anne.dauscher@univ-lorraine.fr [Université de Lorraine, CNRS, UMR 7198, Institut Jean Lamour, Parc de Saurupt, 54011 Nancy (France); Guilmeau, E. [Laboratoire CRISMAT, UMR 6508, 6 boulevard Maréchal Juin, 14050 Caen Cedex (France); Godart, C. [ICMPE-CMTR, CNRS-UMR 7182, 2-8 rue H. Dunant, 94320 Thiais (France)

2014-03-15

Highlights: • Fabrication of nanostructured skutterudites ZnO or PbTe/In{sub 0.2}Co{sub 4}Sb{sub 12.} • Thermal conductivity modeling accounts for experimental results. • Greater lattice thermal conductivity decrease in In{sub 0.2}Co{sub 4}Sb{sub 12} than in CoSb{sub 3}. • A max ZT of 1.05 is obtained at 700 K in a 2 wt% ZnO-containing sample. -- Abstract: Transport properties of the skutterudite compound In{sub 0.2}Co{sub 4}Sb{sub 12} containing ZnO or PbTe nano-sized particles (2–12 wt%) were investigated by means of electrical resistivity, thermopower and thermal conductivity between 5 and 800 K. The composite powders were prepared by freeze-drying the nanoparticles with micron-sized In{sub 0.2}Co{sub 4}Sb{sub 12} powders. Densification was achieved by spark plasma sintering. All composites were characterized by X-ray powder diffraction and scanning electron microscopy. All the transport coefficients show similar temperature dependences suggesting little influence of the nature, semiconducting or insulating, of the nanoparticles. Both the electrical and the thermal conductivities decrease with increasing the PbTe or ZnO content. The impact of ZnO and PbTe on the thermal conductivity was modelled based on the Debye model taking into account a relaxation time constant reflecting phonon scattering by spherical nanoparticles. A maximum dimensionless figure of merit ZT of 1.05 at 700 K was achieved in a sample containing 2 wt% ZnO, a value quite similar to that of the reference In{sub 0.2}Co{sub 4}Sb{sub 12} compound.

Emissions inventories and options for control. Summary report

Energy Technology Data Exchange (ETDEWEB)

Swart, R.J.; Van Amstel, A.R.; Van den Born, G.J.; Kroeze, C.

1995-10-01

This report is the final summary report of the project `Social causes of the greenhouse effect, emissions inventories and options for control`. The objectives of the project, that started in 1990, were to support the development of a comprehensive Dutch climate policy and to identify gaps in the knowledge about sources of greenhouse gases. The four phases of the project are summarized. In the first phase, a first national inventory of greenhouse gas emissions was made, capturing carbon dioxide (CO{sub 2}), chlorofluorocarbons (CFCs), methane (CH{sub 4}), nitrous oxide (N{sub 2}O) and the ozone precursors carbon monoxide (CO), nitrogen oxides (NO{sub x} ) and volatile organic compounds (VOC). In the second phase, the acquired expertise was used to support the development of Guidelines for National Emissions Inventories by the joint OECD/IPCC programme through workshop organization and participation in the international planning group. In the third phase, a detailed analysis was performed of the sources of methane, its current and future emissions and the options for control. Finally, a similar analysis was performed for nitrous oxide. In these studies, it was found that policies not specifically aiming at mitigating climate change, would help to control the emissions of the non-CO{sub 2} greenhouse gases. While for methane, national emissions would even decrease because of measures in the livestock management and waste disposal sectors, for nitrous oxide the reductions in agricultural emissions would be outweighed by increases, especially in the transportation sector. The project shows that the application of more detailed information leads to differences with the Guidelines, both because of the limited number of source categories in the Guidelines and because of different, locally specific emissions factors. 4 figs., 2 tabs., 14 refs.

Evaluation of wrapper tube temperatures of fast neutron reactors using the TRANSCOEUR-2 code

Energy Technology Data Exchange (ETDEWEB)

Valentin, B.; Brun P. [CEA/DRN/DEC/SECA/LHC CEN, St Paul Lez Durance (France); Chaigne, G. [FRAMATOME/NOVATOME, Lyon (France)

1995-09-01

This paper deals with the thermal loading estimation of wrapper tubes using the TRANSCOEUR-2 code. This estimation requires a knowledge of two temperature fields: the first involves the peripheral sub-channel temperatures of each sub-assembly calculated by the design code CADET, and the second, outside the sub-assemblies, is the inter-wrapper flow temperature field calculated by the thermal-hydraulic code TRIO-VF with boundary conditions taken from CADET. Theoretical models of the three codes are presented as well as the first TRANSCOEUR-2 wrapper tube temperature calculation performed on the European Fast Reactor (EFR) Core Design 6/91 (CD 6/91) under nominal power conditions. The results show a temperature variation of 115{degrees}C between the bottom of the lower blanket and the top of the upper blanket fuel sub-assemblies in the center of the core and 95{degrees}C at the core periphery. The wrapper tube temperatures are higher in the center than in the external core.

Error-correction coding for digital communications

Science.gov (United States)

Clark, G. C., Jr.; Cain, J. B.

This book is written for the design engineer who must build the coding and decoding equipment and for the communication system engineer who must incorporate this equipment into a system. It is also suitable as a senior-level or first-year graduate text for an introductory one-semester course in coding theory. Fundamental concepts of coding are discussed along with group codes, taking into account basic principles, practical constraints, performance computations, coding bounds, generalized parity check codes, polynomial codes, and important classes of group codes. Other topics explored are related to simple nonalgebraic decoding techniques for group codes, soft decision decoding of block codes, algebraic techniques for multiple error correction, the convolutional code structure and Viterbi decoding, syndrome decoding techniques, and sequential decoding techniques. System applications are also considered, giving attention to concatenated codes, coding for the white Gaussian noise channel, interleaver structures for coded systems, and coding for burst noise channels.

Boltzmann-Fokker-Planck calculations using standard discrete-ordinates codes

International Nuclear Information System (INIS)

Morel, J.E.

1987-01-01

The Boltzmann-Fokker-Planck (BFP) equation can be used to describe both neutral and charged-particle transport. Over the past several years, the author and several collaborators have developed methods for representing Fokker-Planck operators with standard multigroup-Legendre cross-section data. When these data are input to a standard S/sub n/ code such as ONETRAN, the code actually solves the Boltzmann-Fokker-Planck equation rather than the Boltzmann equation. This is achieved wihout any modification to the S/sub n/ codes. Because BFP calculations can be more demanding from a numerical viewpoint than standard neutronics calculations, we have found it useful to implement new quadrature methods ad convergence acceleration methods in the standard discrete-ordinates code, ONETRAN. We discuss our BFP cross-section representation techniques, our improved quadrature and acceleration techniques, and present results from BFP coupled electron-photon transport calculations performed with ONETRAN. 19 refs., 7 figs

Bayesian Option Pricing using Mixed Normal Heteroskedasticity Models

DEFF Research Database (Denmark)

Rombouts, Jeroen; Stentoft, Lars

2014-01-01

Option pricing using mixed normal heteroscedasticity models is considered. It is explained how to perform inference and price options in a Bayesian framework. The approach allows to easily compute risk neutral predictive price densities which take into account parameter uncertainty....... In an application to the S&P 500 index, classical and Bayesian inference is performed on the mixture model using the available return data. Comparing the ML estimates and posterior moments small differences are found. When pricing a rich sample of options on the index, both methods yield similar pricing errors...... measured in dollar and implied standard deviation losses, and it turns out that the impact of parameter uncertainty is minor. Therefore, when it comes to option pricing where large amounts of data are available, the choice of the inference method is unimportant. The results are robust to different...

User's manual for a measurement simulation code

International Nuclear Information System (INIS)

Kern, E.A.

1982-07-01

The MEASIM code has been developed primarily for modeling process measurements in materials processing facilities associated with the nuclear fuel cycle. In addition, the code computes materials balances and the summation of materials balances along with associated variances. The code has been used primarily in performance assessment of materials' accounting systems. This report provides the necessary information for a potential user to employ the code in these applications. A number of examples that demonstrate most of the capabilities of the code are provided

Resistive switching in different forming states of Ti/Pr{sub 0.48}Ca{sub 0.52}MnO{sub 3} junctions

Energy Technology Data Exchange (ETDEWEB)

Park, Chanwoo; Herpers, Anja; Bruchhaus, Rainer; Dittmann, Regina [PGI-7, FZ Juelich (Germany); Verbeeck, Johan; Egoavil, Ricardo [EMAT, University of Antwerp (Belgium); Borgatti, Francesco [ISMN-CNR, Bologna (Italy); Panaccione, Giancarlo [Laboratorio Nazionale TASC-INFM-CNR, Trieste (Italy); Offi, Francesco [CNISM, Rome (Italy); Dipartimento di Fisica, Universita Roma Tre, Rome (Italy)

2012-07-01

The properties of thin oxide films and multilayers are strongly influenced by defects and, therefore, can be controllably tuned by the defect concentration at the interface. For example, due to the charge discontinuity at the SrTiO{sub 3}/KO-KNbO{sub 3}-NbO{sub 2}/SrTiO{sub 3} interface only one direction of polarization in KNbO{sub 3} film is stable. A switchable polarization in KNbO{sub 3} can be realized by creating (oxygen) defects at the interfaces. We carried out density functional theory (DFT) calculations based on the full potential linearized augmented planewave (FLAPW) method as implemented in the FLEUR code for studying the polar interface SrTiO{sub 3}/KNbO{sub 3} and a SrRuO{sub 3}/SrTiO{sub 3}/KNbO{sub 3} tunnel junction. The electronic transport properties of the switchable multiferroic SrRuO{sub 3}/SrTiO{sub 3}/KO-KNbO{sub 3}-NbO{sub 3}/SrTiO{sub 3}/SrRuO{sub 3} heterostructure have been investigated using an embedded Green-function approach. A strong dependence of the (magneto electric) transport properties on the polarization is observed.

Transmutation performance analysis on coolant options in a hybrid reactor system design for high level waste incineration

Energy Technology Data Exchange (ETDEWEB)

Hong, Seong-Hee; Siddique, Muhammad Tariq; Kim, Myung Hyun, E-mail: mhkim@khu.ac.kr

2015-11-15

Highlights: • Waste transmutation performance was compared and analyzed for seven different coolant options. • Reactions of fission and capture showed big differences depending on coolant options. • Moderation effect significantly affects on energy multiplication, tritium breeding and waste transmutation. • Reduction of radio-toxicities of TRUs showed different trend to coolant choice from performance of waste transmutation. - Abstract: A fusion–fission hybrid reactor (FFHR) is one of the most attractive candidates for high level waste transmutation. The selection of coolant affects the transmutation performance of a FFHR. LiPb coolant, as a conventional coolant for a FFHR, has problems such as reduction in neutron economic and magneto-hydro dynamics (MHD) pressure drop. Therefore, in this work, transmutation performance is evaluated and compared for various coolant options such as LiPb, H{sub 2}O, D{sub 2}O, Na, PbBi, LiF-BeF{sub 2} and NaF-BeF{sub 2} applicable to a hybrid reactor for waste transmutation (Hyb-WT). Design parameters measuring performance of a hybrid reactor were evaluated by MCNPX. They are k{sub eff}, energy multiplication factor, neutron absorption ratio, tritium breeding ratio, waste transmutation ratio, support ratio and radiotoxicity reduction. Compared to LiPb, H{sub 2}O and D{sub 2}O are not suitable for waste transmutation because of neutron moderation effect. Waste transmutation performances with Na and PbBi are similar to each other and not different much from LiPb. Even though molten salt such as LiF-BeF{sub 2} and NaF-BeF{sub 2} is good for avoiding MHD pressure drop problem, waste transmutation performance is dropped compared with LiPb.

User manual for version 4.3 of the Tripoli-4 Monte-Carlo method particle transport computer code; Notice d'utilisation du code Tripoli-4, version 4.3: code de transport de particules par la methode de Monte Carlo

Energy Technology Data Exchange (ETDEWEB)

Both, J.P.; Mazzolo, A.; Peneliau, Y.; Petit, O.; Roesslinger, B

2003-07-01

This manual relates to Version 4.3 TRIPOLI-4 code. TRIPOLI-4 is a computer code simulating the transport of neutrons, photons, electrons and positrons. It can be used for radiation shielding calculations (long-distance propagation with flux attenuation in non-multiplying media) and neutronic calculations (fissile medium, criticality or sub-criticality basis). This makes it possible to calculate k{sub eff} (for criticality), flux, currents, reaction rates and multi-group cross-sections. TRIPOLI-4 is a three-dimensional code that uses the Monte-Carlo method. It allows for point-wise description in terms of energy of cross-sections and multi-group homogenized cross-sections and features two modes of geometrical representation: surface and combinatorial. The code uses cross-section libraries in ENDF/B format (such as JEF2-2, ENDF/B-VI and JENDL) for point-wise description cross-sections in APOTRIM format (from the APOLLO2 code) or a format specific to TRIPOLI-4 for multi-group description. (authors)

Bank Accounts for Public Finance Agencies Income

Directory of Open Access Journals (Sweden)

Paweł Lenio

2014-03-01

Full Text Available The subject of this paper are bank accounts for public finance agencies income. The article describes characteristics of accounts for all three kinds of agencies: government and municipal units working in regards to statue of education and units with headquarters in foreign countries. The author presents a detailed directory of income for particular accounts and the allocation of said income. This paper also deals with the optionality of those dedicated bank accounts and the competence for erecting them. In a smaller scope there are presented the controversies of establishing bank accounts for public finance agencies income in the past, before the current statue of public finance.

Simulations with COREDIV Code of DEMO Discharges

Energy Technology Data Exchange (ETDEWEB)

Zagorski, R.; Stankiewicz, R.; Ivanova-Stanik, I., E-mail: roman.zagorski@ipplm.pl [Institute of Plasma Physics and Laser Microfusion, Warsaw (Poland)

2012-09-15

Full text: The reduction of divertor target power load due to radiation of sputtered and externally seeded impurities in fusion reactor is investigated in this paper. The approach is based on integrated numerical modelling of DEMO discharges using the COREDIV code, which self-consistently solves 1D radial transport equations of plasma and impurities in the core region and 2D multifluid transport in the SOL. The model is fully self-consistent with respect to both the effects of impurities on the alpha-power level and the interaction between seeded and intrinsic impurities. The code has been already successfully benchmarked with the data from present day experiments (JET, ADEX). Calculations have been performed for inductive DEMO scenario and DEMO Steady-State configuration with tungsten walls and Ar seeding. In case of DEMO Steady-State scenario strong increase of Z{sub eff} and significant reduction of the alpha power are observed with the increase of Ar influx which is caused by the decrease of fuel ions density due to the dilution effect. It leads to the reduction of the target plate heat loads but surprisingly the radiation level remains almost constant with the increased seeding which is the result of the interplay between the energy losses and tungsten source due to sputtering processes. It has been found that the W radiation is the dominant energy loss mechanism and it accounts for 90% of all radiation losses. In case of pulsed DEMO scenario, it appears that the helium accumulation might be a serious problem. Even without seeding the resulting Z{sub eff} is very large (> 2.6) and consequently only relatively weak seeding can be applied for pulsed scenario. It is found that helium accumulation depends strongly on the transport model used for helium, if the helium diffusion is increased than the accumulation effect is mitigated. (author)

Waste package emplacement borehole option study

International Nuclear Information System (INIS)

Streeter, W.S.

1992-03-01

This study evaluates the cost and thermal effects of various waste package emplacement configurations that differ in emplacement orientation, number of containers per borehole, and standoff distance at the potential Yucca Mountain nuclear waste repository. In this study, eight additional alternatives to the vertical and horizontal orientation options presented in the Site Characterization Plan Conceptual Design Report are considered. Typical panel layout configurations based on thermal analysis of the waste and cost estimates for design and construction, operations, and closure and decommissioning were made for each emplacement option. For the thermal analysis average waste 10 years out of reactor and the SIM code were used to determine whether the various configurations temperatures would exceed the design criteria for temperature. This study does not make a recommendation for emplacement configuration, but does provide information for comparison of alternatives

Working Time Arrangement Options in The Slovak Republic

Directory of Open Access Journals (Sweden)

Kucharčíková Alžbeta

2010-12-01

Full Text Available In recent years, the standard model for organizing working-time has been placed under strong pressure and the need to make adjustments to changing circumstances is increasing. The Slovak legal practice has had to react to this situation. An amended Labour Code, which came into force on 1 September 2007, has built up an internal labour market conditions for enforcing working time flexibility. The aim of this report is to present options and possibilities of working time arrangement according to the Slovak Labour Code and to design ways on how they should be included in the decision making process of an enterprise.

A Methodology for Comparative Assessment of Energy Options: The Case of Mexico

International Nuclear Information System (INIS)

Martin-del-Campo, Cecilia; Francois, Juan-Luis

2008-01-01

This paper presents the development of a methodology to measure the sustainability of alternatives for electricity generation. It is based on the evaluation of indicators in three dimensions of sustainability. No single technology exhibited superior performance on the basis of all indicators and it was necessary the application of a method to make the aggregation of all the indicators, taking into account the relative importance in the decision. In this study, a fuzzy logic inference system was developed to build a decision function that depends on all the indicators. The purpose is to rank the energy options in terms of economic, environmental and social sustainability. All the decision elements are combined and integrated in an inference logic system that takes into account weights of different indicators. The methodology was applied to evaluate the sustainability of nuclear, wind, natural gas, coal, hydro and oil technologies under Mexican conditions. When only the economic dimension is considered nuclear is the best option, if the environmental dimension is also considered the nuclear option is the best alternative too. When the social dimension is also taken into account the nuclear option is the worst. These results are obtained using the same weight to each dimension to accomplish with the equilibrium principle of the sustainability. (authors)

Addressing Ethical Matters in Ukrainian Accounting Practice

Directory of Open Access Journals (Sweden)

Yurii Zhatkin

2017-10-01

Full Text Available Nowadays professional ethics is rapidly gaining its importance all over the world in general and in accounting ethics, in particular. Financial scandals have shifted the focus from the technical competence of accounting professionals to their ethical behavior. Recent developments and changes have made the code of ethics a vital tool to maintain the reputation of the accounting profession, however, little is known about the recent developments in this field in the transition economy of Ukraine. The aim of the research is to reveal the opinions on professional accounting ethics among Ukrainian professionals and to identify the adherence to ethical behavior and prevalence of ethical issues in accounting practices in Ukraine. The authors conducted a survey in the form of questionnaire among the target audience of professional accountants in both private and public organizations. The results have shown that while the general opinion of the respondents on the present level of accounting ethics in Ukraine is low, they are well aware of the Code of Ethics for Professional Accountants, its main principles and their importance. The study also indicated that professional ethics should be included into the HEIs curriculum and definitely deserves more attention from the public side.

The role of the PIRT process in identifying code improvements and executing code development

International Nuclear Information System (INIS)

Wilson, G.E.; Boyack, B.E.

1997-01-01

In September 1988, the USNRC issued a revised ECCS rule for light water reactors that allows, as an option, the use of best estimate (BE) plus uncertainty methods in safety analysis. The key feature of this licensing option relates to quantification of the uncertainty in the determination that an NPP has a low probability of violating the safety criteria specified in 10 CFR 50. To support the 1988 licensing revision, the USNRC and its contractors developed the CSAU evaluation methodology to demonstrate the feasibility of the BE plus uncertainty approach. The PIRT process, Step 3 in the CSAU methodology, was originally formulated to support the BE plus uncertainty licensing option as executed in the CSAU approach to safety analysis. Subsequent work has shown the PIRT process to be a much more powerful tool than conceived in its original form. Through further development and application, the PIRT process has shown itself to be a robust means to establish safety analysis computer code phenomenological requirements in their order of importance to such analyses. Used early in research directed toward these objectives, PIRT results also provide the technical basis and cost effective organization for new experimental programs needed to improve the safety analysis codes for new applications. The primary purpose of this paper is to describe the generic PIRT process, including typical and common illustrations from prior applications. The secondary objective is to provide guidance to future applications of the process to help them focus, in a graded approach, on systems, components, processes and phenomena that have been common in several prior applications

Estimation of petroleum assets: contribution of the options theory

International Nuclear Information System (INIS)

Chesney, M.

1999-01-01

With the development of data on real options, the theoretical and practical research on projects estimation has advanced considerably. The analogy between investment advisabilities and options allow to take into account the flexibility which is inherent in any project as well as the choices which are available to investors. The advantages of this approach are shown in this paper. An example of application in the field of petroleum industry is given. (O.M.)

Raman E sub 1 , E sub 1 + DELTA sub 1 resonance in nonstressed quantum dots of germanium

CERN Document Server

Talochkin, A B; Efanov, A V; Kozhemyako, I G; Shumskij, V N

2001-01-01

The Raman light scattering on the optical phonons in the nonstressed Ge quantum dots, obtained in the GaAs/ZnSe/Ge/ZnSe structures is studied through the molecular-beam epitaxy. The E sub 1 , E sub 1 + DELTA sub 1 resonance energy shift, connected with quantization of the electron and hole states spectrum in the quantum dots is observed. Application of the simplest localization model with an account of the Ge electron states spectrum made it possible to explain the observed peculiarities

Preferential orientation relationships in Ca{sub 2}MnO{sub 4} Ruddlesden-Popper thin films

Energy Technology Data Exchange (ETDEWEB)

Lacotte, M.; David, A.; Prellier, W., E-mail: wilfrid.prellier@ensicaen.fr [Laboratoire CRISMAT, CNRS UMR 6508, ENSICAEN, Université de Basse-Normandie, 6 Bd Maréchal Juin, F-14050 Caen Cedex 4 (France); Rohrer, G. S.; Salvador, P. A. [Department of Materials Science and Engineering, Carnegie Mellon University, 5000 Forbes Ave., Pittsburgh, Pennsylvania 15213 (United States)

2015-07-28

A high-throughput investigation of local epitaxy (called combinatorial substrate epitaxy) was carried out on Ca{sub 2}MnO{sub 4} Ruddlesden-Popper thin films of six thicknesses (from 20 to 400 nm), all deposited on isostructural polycrystalline Sr{sub 2}TiO{sub 4} substrates. Electron backscatter diffraction revealed grain-over-grain local epitaxial growth for all films, resulting in a single orientation relationship (OR) for each substrate-film grain pair. Two preferred epitaxial ORs accounted for more than 90% of all ORs on 300 different microcrystals, based on analyzing 50 grain pairs for each thickness. The unit cell over unit cell OR ([100][001]{sub film} ∥ [100][001]{sub substrate}, or OR1) accounted for approximately 30% of each film. The OR that accounted for 60% of each film ([100][001]{sub film} ∥ [100][010]{sub substrate}, or OR2) corresponds to a rotation from OR1 by 90° about the a-axis. OR2 is strongly favored for substrate orientations in the center of the stereographic triangle, and OR1 is observed for orientations very close to (001) or to those near the edge connecting (100) and (110). While OR1 should be lower in energy, the majority observation of OR2 implies kinetic hindrances decrease the frequency of OR1. Persistent grain over grain growth and the absence of variations of the OR frequencies with thickness implies that the growth competition is finished within the first few nm, and local epitaxy persists thereafter during growth.

The fast decoding of Reed-Solomon codes using Fermat theoretic transforms and continued fractions

Science.gov (United States)

Reed, I. S.; Scholtz, R. A.; Welch, L. R.; Truong, T. K.

1978-01-01

It is shown that Reed-Solomon (RS) codes can be decoded by using a fast Fourier transform (FFT) algorithm over finite fields GF(F sub n), where F sub n is a Fermat prime, and continued fractions. This new transform decoding method is simpler than the standard method for RS codes. The computing time of this new decoding algorithm in software can be faster than the standard decoding method for RS codes.

GOC: General Orbit Code

International Nuclear Information System (INIS)

Maddox, L.B.; McNeilly, G.S.

1979-08-01

GOC (General Orbit Code) is a versatile program which will perform a variety of calculations relevant to isochronous cyclotron design studies. In addition to the usual calculations of interest (e.g., equilibrium and accelerated orbits, focusing frequencies, field isochronization, etc.), GOC has a number of options to calculate injections with a charge change. GOC provides both printed and plotted output, and will follow groups of particles to allow determination of finite-beam properties. An interactive PDP-10 program called GIP, which prepares input data for GOC, is available. GIP is a very easy and convenient way to prepare complicated input data for GOC. Enclosed with this report are several microfiche containing source listings of GOC and other related routines and the printed output from a multiple-option GOC run

IAEA provisional code of practice on management of radioactive waste from nuclear power plants

International Nuclear Information System (INIS)

1982-10-01

This Code of Practice defines the minimum requirements for operations and design of structures, systems and components important for management of wastes from thermal nuclear power plants. It emphasizes what safety requirements shall be met rather than specifies how these requirements can be met; the latter aspect is covered in Safety Guides. The Code defines the need for a Government to assume responsibility for regulating waste management practices in conjunction with the regulation of a nuclear power plant. The Code does not prejudge the organization of the regulatory authority, which may differ from one Member State to another, and may involve more than one body. Similarly, the Code does not deal specifically with the functions of a regulatory authority responsible for such matters, although it may be of value to Member States in providing a basis for consideration of such functions. The Code deals with the entire management system for all wastes from nuclear power plants embodying thermal reactors including PWR, BWR, HWR and HTGR technologies. Topics included are: design, normal and abnormal operation, and regulation of management systems for gaseous, liquid and solid wastes, including decommissioning wastes. The Code includes measures to be taken with regard to the wastes arising from spent fuel management at nuclear power plants. However, the options for further management of spent fuel are only outlined since it is the subject of decisions by individual Member States. The Code does not require that an option(s) be decided upon prior to construction or operation of a nuclear power plant

The valence state of uranium in K{sub 6}Cu{sub 12}U{sub 2}S{sub 15}

Energy Technology Data Exchange (ETDEWEB)

Schilder, H; Speldrich, M; Lueken, H; Sutorik, A C; Kanatzidis, M G

2004-07-14

The paramagnetic behaviour of K{sub 6}Cu{sub 12}U{sub 2}S{sub 15} has been analysed, regarding copper as diamagnetic (Cu{sup +}), sulfur as mixed-valent S{sup 2-}/S{sup -} with magnetically silent delocalized S{sup -} holes in the valence band, and the actinide as either U{sup 5+}[5f{sup 1}] or U{sup 4+}[5f{sup 2}] in trigonally distorted octahedral surrounding (pseudosymmetry 3-bar) of sulfur. Fitting procedures have been carried out, accounting for spin-orbit coupling, ligand-field potential (parameters B{sup k}{sub q}), interelectronic repulsion (for U{sup 4+}[5f{sup 2}]), cooperative magnetic effects (molecular field parameter {lambda}), and applied magnetic field. Keeping the ratios B{sup 4}{sub 3}/B{sup 4}{sub 0}, B{sup 6}{sub 3}/B{sup 6}{sub 0}, B{sup 6}{sub 6}/B{sup 6}{sub 0} on their point charge electrostatic values with respect to the sulfur ligands, the three axial parameters B{sup k}{sub 0} (k=2,4,6) and {lambda} were refined. Agreement between measured and calculated susceptibility data was obtained for U{sup 5+} with B{sup k}{sub 0} values expected for octahedral surrounding and {lambda}<0 speaking for antiferromagnetic interactions. The U{sup 4+} model does yield a fit of comparable quality, but gives B{sup k}{sub 0} values that are unreasonable with respect to sign and magnitude. To conclude, on the basis of the magnetic properties the title compound is a 5f{sup 1} system corresponding to the elements formal charges (K{sup +}){sub 6}(Cu{sup +}){sub 12}(U{sup 5+}){sub 2}(S{sup 2-}){sub 13}(S{sup -}){sub 2}.

Implantation of Magint-Maggraf code in the Microvax-3600 system

International Nuclear Information System (INIS)

Leite Neto, J.P.; Shiabata, C.S.; Montes, A.

1990-01-01

An auxiliary code, named MAGGRAF, was developed and implemented on the MicroVAX-3600 system of the Plasma Laboratory at the Institute for Space Research, in order to perform the graphical output of the numerical results provided by the magnetic field calculation code MAGINT. In this report we present a brief description of the graphical code, of the parameters which specify the different output options, and of the structure of the data file containing these parameters. Some examples are shown to illustrate the versatility of the code, as well as the quality of the graphs. (author)

Accounting Principles and Financial Statements.

Science.gov (United States)

Robinson, Daniel D.

1973-01-01

This document presents the background and analysis of the American Institute of Certified Public Accountants (AICPA) guide to auditing colleges and universities. Highlights include the approval of the market value option, the treatment of endowment gains, debt services as transfers, the decisions on pledges, the use of financial statements, the…

CO<sub>2sub> Saline Storage Demonstration in Colorado Sedimentary Basins. Applied Studies in Reservoir Assessment and Dynamic Processes Affecting Industrial Operations

Energy Technology Data Exchange (ETDEWEB)

Nummedal, Dag [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Doran, Kevin [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Sitchler, Alexis [Trustees Of The Colorado School Of Mines, Golden, CO (United States); McCray, John [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Mouzakis, Katherine [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Glossner, Andy [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Mandernack, Kevin [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Gutierrez, Marte [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Pranter, Matthew [Trustees Of The Colorado School Of Mines, Golden, CO (United States); Rybowiak, Chris [Trustees Of The Colorado School Of Mines, Golden, CO (United States)

2012-09-30

This multitask research project was conducted in anticipation of a possible future increase in industrial efforts at CO<sub>2sub> storage in Colorado sedimentary basins. Colorado is already the home to the oldest Rocky Mountain CO<sub>2sub> storage site, the Rangely Oil Field, where CO<sub>2sub>-EOR has been underway since the 1980s. The Colorado Geological Survey has evaluated storage options statewide, and as part of the SW Carbon Sequestration Partnership the Survey, is deeply engaged in and committed to suitable underground CO<sub>2sub> storage. As a more sustainable energy industry is becoming a global priority, it is imperative to explore the range of technical options available to reduce emissions from fossil fuels. One such option is to store at least some emitted CO<sub>2sub> underground. In this NETL-sponsored CO<sub>2sub> sequestration project, the Colorado School of Mines and our partners at the University of Colorado have focused on a set of the major fundamental science and engineering issues surrounding geomechanics, mineralogy, geochemistry and reservoir architecture of possible CO<sub>2sub> storage sites (not limited to Colorado). Those are the central themes of this final report and reported below in Tasks 2, 3, 4, and 6. Closely related to these reservoir geoscience issues are also legal, environmental and public acceptance concerns about pore space accessibility—as a precondition for CO<sub>2sub> storage. These are addressed in Tasks 1, 5 and 7. Some debates about the future course of the energy industry can become acrimonius. It is true that the physics of combustion of hydrocarbons makes it impossible for fossil energy to attain a carbon footprint anywhere nearly as low as that of renewables. However, there are many offsetting benefits, not the least that fossil energy is still plentiful, it has a global and highly advanced distribution system in place, and the footprint that the fossil energy infrastructure occupies is

An Analysis of the Relationship between IFAC Code of Ethics and CPI

Directory of Open Access Journals (Sweden)

Ayşe İrem Keskin

2015-11-01

Full Text Available Abstract Code of ethics has become a significant concept as regards to the business world. That is why occupational organizations have developed their own codes of ethics over time. In this study, primarily the compatibility classification of the accounting code of ethics belonging to the IFAC (The International Federation of Accountants is carried out on the basis of the action plans assessing the levels of usage by the 175 IFAC national accounting organizations. It is determined as a result of the classification that 60,6% of the member organizations are applying the IFAC code in general, the rest 39,4% on the other hand, is not applying the code at all. With this classification, the hypothesis propounding that “The national accounting organizations in highly corrupt countries would be less likely to adopt the IFAC ethic code than those in very clean countries,” is tested using the “Corruption Perception Index-CPI” data. It is determined that the findings support this relevant hypothesis.          

S sub(N) transport and diffusion acceleration

International Nuclear Information System (INIS)

Gho, C.J.

1986-01-01

After brief description of the characteristics and history of S sub(N) transport method and the present development of transport codes, the technique of diffusion acceleration and the characteristics of its implementation in BISTRO computer code are exposed. It is showed that the method to discretize algorithms leads to strongly results using some simple calculations which alloy to compare the performance of BISTRO computer code to distinguished versions of DOT computer code. (M.C.K.) [pt

The free-energy self: a predictive coding account of self-recognition.

Science.gov (United States)

Apps, Matthew A J; Tsakiris, Manos

2014-04-01

Recognising and representing one's self as distinct from others is a fundamental component of self-awareness. However, current theories of self-recognition are not embedded within global theories of cortical function and therefore fail to provide a compelling explanation of how the self is processed. We present a theoretical account of the neural and computational basis of self-recognition that is embedded within the free-energy account of cortical function. In this account one's body is processed in a Bayesian manner as the most likely to be "me". Such probabilistic representation arises through the integration of information from hierarchically organised unimodal systems in higher-level multimodal areas. This information takes the form of bottom-up "surprise" signals from unimodal sensory systems that are explained away by top-down processes that minimise the level of surprise across the brain. We present evidence that this theoretical perspective may account for the findings of psychological and neuroimaging investigations into self-recognition and particularly evidence that representations of the self are malleable, rather than fixed as previous accounts of self-recognition might suggest. Copyright © 2013 Elsevier Ltd. All rights reserved.

RADTRAN 5 - A computer code for transportation risk analysis

International Nuclear Information System (INIS)

Neuhauser, K.S.; Kanipe, F.L.

1993-01-01

The RADTRAN 5 computer code has been developed to estimate radiological and nonradiological risks of radioactive materials transportation. RADTRAN 5 is written in ANSI standard FORTRAN 77; the code contains significant advances in the methodology first pioneered with the LINK option of RADTRAN 4. A major application of the LINK methodology is route-specific analysis. Another application is comparisons of attributes along the same route segments. Nonradiological risk factors have been incorporated to allow users to estimate nonradiological fatalities and injuries that might occur during the transportation event(s) being analyzed. These fatalities include prompt accidental fatalities from mechanical causes. Values of these risk factors for the United States have been made available in the code as optional defaults. Several new health effects models have been published in the wake of the Hiroshima-Nagasaki dosimetry reassessment, and this has emphasized the need for flexibility in the RADTRAN approach to health-effects calculations. Therefore, the basic set of health-effects conversion equations in RADTRAN have been made user-definable. All parameter values can be changed by the user, but a complete set of default values are available for both the new International Commission on Radiation Protection model (ICRP Publication 60) and the recent model of the U.S. National Research Council's Committee on the Biological Effects of Radiation (BEIR V). The meteorological input data tables have been modified to permit optional entry of maximum downwind distances for each dose isopleth. The expected dose to an individual in each isodose area is also calculated and printed automatically. Examples are given that illustrate the power and flexibility of the RADTRAN 5 computer code. (J.P.N.)

CO{sub 2} control technologies: ALSTOM Power approach

Energy Technology Data Exchange (ETDEWEB)

Stamatelopoulos, G.N.; Marion, J.L.; Nsakala, N.; Griffin, T.; Bill, A. [ALSTOM Power Boiler GmbH, Stuttgart (Germany)

2002-07-01

ALSTOM Power is one of the largest providers of power generation equipment, turnkey power plants and services in the world. The Company is aware of the present scientific concerns regarding greenhouse gas emissions and the role of fossil fuels used in power generation. ALSTOM Power R&D laboratories run various programs aiming to find options that reduce greenhouse gas emissions through: Increasing the efficiency of power generation equipment by implementing the most modern technologies. Application of technologies to remove and sequester carbon dioxide created in power plants in an environmentally and economically favorable manner. In this paper an overview of ALSTOM's on-going CO{sub 2} mitigation development activities will be presented. First, energy efficiency improvements for both new and existing fossil fuel power plants are reviewed for both coal and natural gas fuels. Second, the development of novel power generation processes, including those involving combustion in O{sub 2}/CO{sub 2} atmospheres using pure or enriched oxygen for the purpose of CO{sub 2} capture is discussed. And finally, novel chemical-looping CO{sub 2} capture process technologies are introduced. The major challenge in CO{sub 2} capture techniques is the efficient separation and capture of CO{sub 2}. Conclusions are drawn herein regarding the technical feasibility, the resultant efficiency penalties, and the CO{sub 2} mitigation costs for the various options under study and development within ALSTOM Power. 7 refs., 8 figs.

EPRI-LATTICE: a multigroup neutron transport code for light water reactor lattice physics calculations

International Nuclear Information System (INIS)

Jones, D.B.

1986-01-01

EPRI-LATTICE is a multigroup neutron transport computer code for the analysis of light water reactor fuel assemblies. It can solve the two-dimensional neutron transport problem by two distinct methods: (a) the method of collision probabilities and (b) the method of discrete ordinates. The code was developed by S. Levy Inc. as an account of work sponsored by the Electric Power Research Institute (EPRI). The collision probabilities calculation in EPRI-LATTICE (L-CP) is based on the same methodology that exists in the lattice codes CPM-2 and EPRI-CPM. Certain extensions have been made to the data representations of the CPM programs to improve the overall accuracy of the calculation. The important extensions include unique representations of scattering matrices and fission fractions (chi) for each composition in the problem. A new capability specifically developed for the EPRI-LATTICE code is a discrete ordinates methodology. The discrete ordinates calculation in EPRI-LATTICE (L-SN) is based on the discrete S/sub n/ methodology that exists in the TWODANT program. In contrast to TWODANT, which utilizes synthetic diffusion acceleration and supports multiple geometries, only the transport equations are solved by L-SN and only the data representations for the two-dimensional geometry are treated

Time development of cascades by the binary collision approximation code

International Nuclear Information System (INIS)

Fukumura, A.; Ishino, S.; Sekimura, N.

1991-01-01

To link a molecular dynamic calculation to binary collision approximation codes to explore high energy cascade damage, time between consecutive collisions is introduced into the binary collision MARLOWE code. Calculated results for gold by the modified code show formation of sub-cascades and their spatial and time overlapping, which can affect formation of defect clusters. (orig.)

Neutron powder diffraction analysis of (Tm{sub 0.50}Ca{sub 0.50})MnO{sub 3} and (Lu{sub 0.50}Ca{sub 0.50})MnO{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Martinelli, A., E-mail: alberto.martinelli@spin.cnr.it [SPIN-CNR, C.so Perrone 24, 16152 Genova (Italy); Ferretti, M. [SPIN-CNR, C.so Perrone 24, 16152 Genova (Italy); Universita degli Studi di Genova, Dipartimento di Chimica e Chimica Industriale, Via Dodecaneso 31, 16146 Genova (Italy); Cimberle, M.R. [IMEM-CNR, Via Dodecaneso 33, 16146, Genova (Italy); Ritter, C. [Institute Laue-Langevin, 6 rue Jules Horowitz, 38042 Grenoble Cedex 9 (France)

2012-12-15

The crystal and magnetic structures of (Tm{sub 0.50}Ca{sub 0.50})MnO{sub 3} and (Lu{sub 0.50}Ca{sub 0.50})MnO{sub 3} have been investigated between 5 K and 300 K by means of high resolution neutron powder diffraction followed by Rietveld refinement and dc magnetic measurements. During cooling orbital ordering at the Mn sub-lattice takes place at T{sub OO}{approx}280 K in both compounds, inducing an orthorhombic to monoclinic phase transition. As the temperature is further decreased an antiferromagnetic CE-type structure occurs in both compounds at T{sub N}{approx}105 K. The comparison with other (Ln{sub 0.50}Ca{sub 0.50})MnO{sub 3} compounds reveals that at room temperature the average Jahn-Teller distortion increases sharply with the decrease of the ionic radius for lanthanides heavier than Sm. The ordered magnetic moment progressively decreases as the lanthanide ionic radius decreases on account of the decreased values of the Mn-O-Mn bond angles. - Graphical abstract: Rietveld refinement plot for (Tm{sub 0.50}Ca{sub 0.50})MnO{sub 3} obtained from neutron powder diffraction data collected at 5 K; the inset shows the CE-type spin ordering taking place at the Mn sub-lattice. Highlights: Black-Right-Pointing-Pointer The crystal and magnetic structures of (Tm{sub 0.50}Ca{sub 0.50})MnO{sub 3} and (Lu{sub 0.50}Ca{sub 0.50})MnO{sub 3} were analyzed by neutron powder diffraction. Black-Right-Pointing-Pointer Orbital ordering takes place below T{sub OO}{approx}280 K in both compounds. Black-Right-Pointing-Pointer An antiferromagnetic CE-type structure occurs in both compounds below T{sub N}{approx}105 K. Black-Right-Pointing-Pointer A Comparison with other (Ln{sub 0.50}Ca{sub 0.50})MnO{sub 3} compounds is reported.

Mellin Transform Method for European Option Pricing with Hull-White Stochastic Interest Rate

Directory of Open Access Journals (Sweden)

Ji-Hun Yoon

2014-01-01

Full Text Available Even though interest rates fluctuate randomly in the marketplace, many option-pricing models do not fully consider their stochastic nature owing to their generally limited impact on option prices. However, stochastic dynamics in stochastic interest rates may have a significant impact on option prices as we take account of issues of maturity, hedging, or stochastic volatility. In this paper, we derive a closed form solution for European options in Black-Scholes model with stochastic interest rate using Mellin transform techniques.

Disclosed Values of Option-Based Compensation

DEFF Research Database (Denmark)

Bechmann, Ken L.; Hjortshøj, Toke Lilhauge

New accounting standards require firms to expense the costs of option-based compensation (OBC), but the associated valuations offer many challenges for firms. Earlier research has documented that firms in the U.S. generally underreport the values of OBC by manipulating the inputs used for valuation......-Scholes parameters in their valuations. Furthermore, firms determine the expected time to maturity in a way that is generally consistent with the guidelines provided by the new accounting standards. The findings differ from those of the U.S., but is consistent with the more limited use of OBC and the lower level...

Half metallic ferromagnetism in tri-layered perovskites Sr{sub 4}T{sub 3}O{sub 10}(T = Co, Rh)

Energy Technology Data Exchange (ETDEWEB)

Ghimire, Madhav Prasad, E-mail: ghimire.mpg@gmail.com [Faculty of Science, Nepal Academy of Science and Technology, P. O. Box 3323, Khumaltar, Lalitpur (Nepal); International Center for Materials Nanoarchitectonics (WPI-MANA), National Institute for Materials Science, Tsukuba 305-0044 (Japan); Thapa, R. K.; Sandeep [Department of Physics, Mizoram University, Aizawl 796-004 (India); Rai, D. P. [Department of Physics, Pachhunga University College, Aizawl 796-001 (India); Sinha, T. P. [Department of Physics, Bose Institute, Kolkata 700-009 (India); Hu, Xiao [International Center for Materials Nanoarchitectonics (WPI-MANA), National Institute for Materials Science, Tsukuba 305-0044 (Japan)

2015-02-14

First-principles density functional theory (DFT) is used to investigate the electronic and magnetic properties of Sr{sub 4}Rh{sub 3}O{sub 10}, a member of the Ruddlesden-Popper series. Based on the DFT calculations taking into account the co-operative effect of Coulomb interaction (U) and spin-orbit couplings (SOC), Sr{sub 4}Rh{sub 3}O{sub 10} is found to be a half metallic ferromagnet (HMF) with total magnetic moment μ{sub tot} = 12 μ{sub B} per unit cell. The material has almost 100% spin-polarization at the Fermi level despite of sizable SOC. Replacement of Rh atom by the isovalent Co atom is considered. Upon full-replacement of Co, a low-spin to intermediate spin transition happens resulting in a HMF state with the total magnetic moment three-time larger (i.e., μ{sub tot} = 36 μ{sub B} per unit cell), compared to Sr{sub 4}Rh{sub 3}O{sub 10}. We propose Sr{sub 4}Rh{sub 3}O{sub 10} and Sr{sub 4}Co{sub 3}O{sub 10} as candidates of half metals.

Accrual-based accounting system versus cash-based accounting: An empirical study in municipality organization

Directory of Open Access Journals (Sweden)

Mahbobeh Arab

2013-01-01

Full Text Available There are many cases, where we may wish to choose a good accounting system and would like to learn how they work and the advantages and disadvantages of each so we can choose the better one for a business. In this paper, we present an empirical survey to understand whether we can choose accrual or cash accounting system. The proposed study designs a questionnaire among 220 experts in area of accounting affairs. The survey considers four sub hypotheses and one main hypothesis to see whether there are reliable rules and regulations in accrual-based accounting compared with cash accounting or not. Similarly, the survey investigates whether accrual-based accounting is more informative, comprehensive and provides better comparative results compared with cash accounting. The results indicate that accrual-based account performs better in terms of all mentioned criteria and it is a better method for managing accounting affairs compared with cash accounting systems.

Neutron powder diffraction investigation on the crystal and magnetic structure of (Ho{sub 0.50+x}Ca{sub 0.50-x})(Mn{sub 1-x}Cr{sub x})O{sub 3}

Energy Technology Data Exchange (ETDEWEB)

Martinelli, A; Ferretti, M [SPIN-CNR, Corso Perrone 24, 16152 Genova (Italy); Castellano, C [Dipartimento di Chimica Strutturale e Stereochimica Inorganica, Universita degli Studi di Milano, Via C Venezian 21, 20133 Milano (Italy); Cimberle, M R; Masini, R [IMEM-CNR, Via Dodecaneso 33, 16146 Genova (Italy); Ritter, C, E-mail: alberto.martinelli@spin.cnr.it [Institute Laue-Langevin, 6 rue Jules Horowitz, 38042 Grenoble Cedex 9 (France)

2011-10-19

The crystal and magnetic structure of (Ho{sub 0.50+x}Ca{sub 0.50-x})(Mn{sub 1-x}Cr{sub x})O{sub 3} (x = 0.00, 0.01, 0.02, 0.03) has been investigated between 5 and 300 K by means of neutron powder diffraction followed by Rietveld refinement and dc magnetic measurements. During cooling an orthorhombic to monoclinic phase transition occurs on account of the charge and orbital ordering taking place in the Mn sub-lattice; at low temperature phase separation takes place and the main monoclinic phase coexists with a secondary orthorhombic phase, whose amount slightly increases with the increase of Cr content. Cr{sup 3+} is not involved in orbital ordering or superexchange interactions. The charge and magnetic ordering are decoupled: the Mn moments order according to a CE-type structure in all samples. (paper)

Quaternary Pt{sub 2}Ru{sub 1}Fe{sub 1}M{sub 1}/C (M=Ni, Mo, or W) catalysts for methanol electro-oxidation reaction

Energy Technology Data Exchange (ETDEWEB)

Jeon, Min Ku; Lee, Ki Rak; Kang, Kweon Ho; Park, Geun Il [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Jeon, Hyung Joon [Kyoto University, Kyoto (Japan); McGinn, Paul J. [University of Notre Dame, Indiana (United States)

2015-02-15

Quaternary Pt{sub 2}Ru{sub 1}Fe{sub 1}M{sub 1}/C (M=Ni, Mo, or W) catalysts were investigated for the methanol electro-oxidation reaction (MOR). Electrocatalytic activities of the quaternary catalysts for CO electro-oxidation were studied via CO stripping experiments, and the Pt{sub 2}Ru{sub 1}Fe{sub 1}Ni{sub 1}/C and Pt{sub 2}Ru{sub 1}Fe{sub 1}W{sub 1}/C catalysts exhibited lowered on-set potential compared to that of a commercial PtRu/C catalyst. MOR activities of the quaternary catalysts were determined by linear sweep voltammetry (LSV) experiments, and the Pt{sub 2}Ru{sub 1}Fe{sub 1}W{sub 1}/C catalyst outperformed the commercial PtRu/C catalyst by 170 and 150% for the mass and specific activities, respectively. X-ray photoelectron spectroscopy (XPS) was employed to analyze surface oxidation states of constituent atoms, and it was identified that the structure of the synthesized catalysts are close to a nano-composite of Pt and constituent metal hydroxides and oxides. In addition, the XPS results suggested that the bi-functional mechanism accounts for the improved performance of the Pt{sub 2}Ru{sub 1}Fe{sub 1}Ni{sub 1}/C and Pt{sub 2}Ru{sub 1} Fe{sub 1}W{sub 1}/C catalysts.

Production of analysis code for 'JOYO' dosimetry experiment

International Nuclear Information System (INIS)

Sasaki, Makoto; Nakazawa, Masaharu.

1981-01-01

As part of the measurement and analysis plan for the Dosimetry Experiment at the ''JOYO'' experimental fast reactor, neutron flux spectra analysis is performed using the NEUPAC (Neutron Unfolding Code Package) computer program. The code calculates the neutron flux spectra and other integral quantities from the activation data of the dosimeter foils. The NEUPAC code is based on the J1-type unfolding method, and the estimated neutron flux spectra is obtained as its solution. The program is able to determine the integral quantities and their sensitivities, together with an error estimate of the unfolded spectra and integral quantities. The code also performs a chi-square test of the input/output data, and contains many options for the calculational routines. This report presents the analytic theory, the program algorithms, and a description of the functions and use of the NEUPAC code. (author)

Finite Orbit Width Features in the CQL3D Code

Energy Technology Data Exchange (ETDEWEB)

Petrov, Y. V.; Harvey, R., E-mail: petrov@compxco.com [CompX, Del Mar (United States)

2012-09-15

Full text: The CQL3D Fokker-Planck equation solver is being upgraded to allow for the Finite-Orbit- Width (FOW) capabilities, which will provide an accurate description for a neoclassical transport, losses to the walls, and transfer of particles, momentum, and heat to the scrape-off layer. Two different options are discussed for implementing the FOW capabilities. In one option, the Fokker-Planck equation is solved for the distribution function of orbits centered around given flux surface; in the other, the equation is solved for the local distribution function at the outer-most point of flux surface at the midplane. Both options use a fast lookup table that allows characterization of orbits without actually tracing them. The lookup table, in effect, performs mapping from the Constants-Of-Motion space onto the (R{sub o}, u{sub o}, {theta}{sub o}) computational space on the midplane. The FOW modifications have been implemented for the formations of neutral beam source, RF quasilinear diffusion operator, particle diagnostics and collisional operator, and internal boundary conditions are being refined. Initial test runs show that in general, the FOW modifications result in a broader profiles of power absorption and RF-driven current, and accurate description of the loss cone. (author)

Sustainability Features of Nuclear Fuel Cycle Options

Directory of Open Access Journals (Sweden)

Stefano Passerini

2012-09-01

Full Text Available The nuclear fuel cycle is the series of stages that nuclear fuel materials go through in a cradle to grave framework. The Once Through Cycle (OTC is the current fuel cycle implemented in the United States; in which an appropriate form of the fuel is irradiated through a nuclear reactor only once before it is disposed of as waste. The discharged fuel contains materials that can be suitable for use as fuel. Thus, different types of fuel recycling technologies may be introduced in order to more fully utilize the energy potential of the fuel, or reduce the environmental impacts and proliferation concerns about the discarded fuel materials. Nuclear fuel cycle systems analysis is applied in this paper to attain a better understanding of the strengths and weaknesses of fuel cycle alternatives. Through the use of the nuclear fuel cycle analysis code CAFCA (Code for Advanced Fuel Cycle Analysis, the impact of a number of recycling technologies and the associated fuel cycle options is explored in the context of the U.S. energy scenario over 100 years. Particular focus is given to the quantification of Uranium utilization, the amount of Transuranic Material (TRU generated and the economics of the different options compared to the base-line case, the OTC option. It is concluded that LWRs and the OTC are likely to dominate the nuclear energy supply system for the period considered due to limitations on availability of TRU to initiate recycling technologies. While the introduction of U-235 initiated fast reactors can accelerate their penetration of the nuclear energy system, their higher capital cost may lead to continued preference for the LWR-OTC cycle.

Structural, elastic and thermodynamic properties under pressure and temperature effects of MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4}

Energy Technology Data Exchange (ETDEWEB)

Bouhemadou, A., E-mail: a_bouhemadou@yahoo.fr [Laboratory for Developing New Materials and their Characterization, Department of Physics, Faculty of Science, University of Setif, 19000 Setif (Algeria); Haddadi, K. [Laboratory for Developing New Materials and their Characterization, Department of Physics, Faculty of Science, University of Setif, 19000 Setif (Algeria); Khenata, R. [Laboratoire de Physique Quantique et de Modelisation Mathematique (LPQ3M), Departement de Technologie, Universite de Mascara, 29000 Mascara (Algeria); Rached, D. [Department of Physics, Faculty of Science, University of Sidi-Bel-Abbes, 22000 (Algeria); Bin-Omran, S. [Department of Physics and Astronomy, College of Science, King Saud University, P.O. Box 2455, Riyadh 11451 (Saudi Arabia)

2012-06-15

A density functional-based method is used to investigate the structural, elastic and thermodynamic properties of the cubic spinel semiconductors MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} at different pressures and temperatures. Computed ground structural parameters are in good agreement with the available experimental data. Single-crystal elastic parameters are calculated for pressure up to 10 GPa and temperature up to 1200 K. The obtained elastic constants values satisfy the requirement of mechanical stability, indicating that MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} compounds could be stable in the investigated pressure range. Isotropic elastic parameters for ideal polycrystalline MgIn{sub 2}S{sub 4} and CdIn{sub 2}S{sub 4} aggregates are computed in the framework of the Voigt-Reuss-Hill approximation. Pressure and thermal effects on some macroscopic properties such as lattice constant, volume expansion coefficient and heat capacities are predicted using the quasi-harmonic Debye model in which the lattice vibrations are taken into account.

A Social Accountable Model for Medical Education System in Iran: A Grounded-Theory

Directory of Open Access Journals (Sweden)

Mohammadreza Abdolmaleki

2017-10-01

Full Text Available Social accountability has been increasingly discussed over the past three decades in various fields providing service to the community and has been expressed as a goal for various areas. In medical education system, like other social accountability areas, it is considered as one of the main objectives globally. The aim of this study was to seek a social accountability theory in the medical education system that is capable of identifying all the standards, norms, and conditions within the country related to the study subject and recognize their relationship. In this study, a total of eight experts in the field of social accountability in medical education system with executive or study experience were interviewedpersonally. After analysis of interviews, 379 codes, 59 secondary categories, 16 subcategories, and 9 main categories were obtained. The resulting data was collected and analyzed at three levels of open coding, axial coding, and selective coding in the form of grounded theory study of “Accountability model of medical education in Iran”, which can be used in education system’s policies and planning for social accountability, given that almost all effective components of social accountability in highereducation health system with causal and facilitator associations were determined.Keywords: SOCIAL ACCOUNTABILITY, COMMUNITY–ORIENTED MEDICINE, COMMUNITY MEDICINE, EDUCATION SYSTEM, GROUNDED THEORY

Investigation of structural, electronic, elastic and optical properties of Cd{sub 1-x-y}Zn{sub x}Hg{sub y}Te alloys

Energy Technology Data Exchange (ETDEWEB)

Tamer, M., E-mail: mehmet.tamer@zirve.edu.tr [Zirve University Faculty of Education, 27260, Gaziantep (Turkey)

2016-06-15

Structural, optical and electronic properties and elastic constants of Cd1{sub -x-y}Zn{sub x} Hg{sub y}Te alloys have been studied by employing the commercial code Castep based on density functional theory. The generalized gradient approximation and local density approximation were utilized as exchange correlation. Using elastic constants for compounds, bulk modulus, band gap, Fermi energy and Kramers–Kronig relations, dielectric constants and the refractive index have been found through calculations. Apart from these, X-ray measurements revealed elastic constants and Vegard’s law. It is seen that results obtained from theory and experiments are all in agreement.

ENVI Model Development for Korean Nuclear Spent Fuel Options Analysis

Energy Technology Data Exchange (ETDEWEB)

Chang, Sunyoung; Jeong, Yon Hong; Han, Jae-Jun; Lee, Aeri; Hwang, Yong-Soo [Korea Institute of Nuclear Nonproliferation and Control, Daejeon (Korea, Republic of)

2015-10-15

The disposal facility of the spent nuclear fuel will be operated from 2051. This paper presents the ENVI code developed by GoldSim Software to simulate options for managing spent nuclear fuel (SNF) in South Korea. The ENVI is a simulator to allow decision-makers to assist to evaluate the performance for spent nuclear fuel management. The multiple options for managing the spent nuclear fuel including the storage and transportation are investigated into interim storage, permanent disposal in geological repositories and overseas and domestic reprocessing. The ENVI code uses the GoldSim software to simulate the logistics of the associated activities. The result by the ENVI model not only produces the total cost to compare among the multiple options but also predict the sizes and timings of different facilities required. In order to decide the policy for spent nuclear management this purpose of this paper is to draw the optimum management plan to solve the nuclear spent fuel issue in the economical aspects. This paper is focused on the development of the ENVI's logic and calculations to simulate four options(No Reprocessing, Overseas Reprocessing, Domestic Reprocessing, and Overseas and Domestic Reprocessing) for managing the spent nuclear fuel in South Korea. The time history of the spent nuclear fuel produced from both the existing and future NPP's can be predicted, based on the Goldsim software made available very user friendly model. The simulation result will be used to suggest the strategic plans for the spent nuclear fuel management.

ENVI Model Development for Korean Nuclear Spent Fuel Options Analysis

International Nuclear Information System (INIS)

Chang, Sunyoung; Jeong, Yon Hong; Han, Jae-Jun; Lee, Aeri; Hwang, Yong-Soo

2015-01-01

The disposal facility of the spent nuclear fuel will be operated from 2051. This paper presents the ENVI code developed by GoldSim Software to simulate options for managing spent nuclear fuel (SNF) in South Korea. The ENVI is a simulator to allow decision-makers to assist to evaluate the performance for spent nuclear fuel management. The multiple options for managing the spent nuclear fuel including the storage and transportation are investigated into interim storage, permanent disposal in geological repositories and overseas and domestic reprocessing. The ENVI code uses the GoldSim software to simulate the logistics of the associated activities. The result by the ENVI model not only produces the total cost to compare among the multiple options but also predict the sizes and timings of different facilities required. In order to decide the policy for spent nuclear management this purpose of this paper is to draw the optimum management plan to solve the nuclear spent fuel issue in the economical aspects. This paper is focused on the development of the ENVI's logic and calculations to simulate four options(No Reprocessing, Overseas Reprocessing, Domestic Reprocessing, and Overseas and Domestic Reprocessing) for managing the spent nuclear fuel in South Korea. The time history of the spent nuclear fuel produced from both the existing and future NPP's can be predicted, based on the Goldsim software made available very user friendly model. The simulation result will be used to suggest the strategic plans for the spent nuclear fuel management

Development and verification of a coupled code system RETRAN-MASTER-TORC

International Nuclear Information System (INIS)

Cho, J.Y.; Song, J.S.; Joo, H.G.; Zee, S.Q.

2004-01-01

Recently, coupled thermal-hydraulics (T-H) and three-dimensional kinetics codes have been widely used for the best-estimate simulations such as the main steam line break (MSLB) and locked rotor problems. This work is to develop and verify one of such codes by coupling the system T-H code RETRAN, the 3-D kinetics code MASTER and sub-channel analysis code TORC. The MASTER code has already been applied to such simulations after coupling with the MARS or RETRAN-3D multi-dimensional system T-H codes. The MASTER code contains a sub-channel analysis code COBRA-III C/P, and the coupled systems MARSMASTER-COBRA and RETRAN-MASTER-COBRA had been already developed and verified. With these previous studies, a new coupled system of RETRAN-MASTER-TORC is to be developed and verified for the standard best-estimate simulation code package in Korea. The TORC code has already been applied to the thermal hydraulics design of the several ABB/CE type plants and Korean Standard Nuclear Power Plants (KSNP). This justifies the choice of TORC rather than COBRA. Because the coupling between RETRAN and MASTER codes are already established and verified, this work is simplified to couple the TORC sub-channel T-H code with the MASTER neutronics code. The TORC code is a standalone code that solves the T-H equations for a given core problem from reading the input file and finally printing the converged solutions. However, in the coupled system, because TORC receives the pin power distributions from the neutronics code MASTER and transfers the T-H results to MASTER iteratively, TORC needs to be controlled by the MASTER code and does not need to solve the given problem completely at each iteration step. By this reason, the coupling of the TORC code with the MASTER code requires several modifications in the I/O treatment, flow iteration and calculation logics. The next section of this paper describes the modifications in the TORC code. The TORC control logic of the MASTER code is then followed. The

Upgrades to the WIMS-ANL code

International Nuclear Information System (INIS)

Woodruff, W. L.

1998-01-01

The dusty old source code in WIMS-D4M has been completely rewritten to conform more closely with current FORTRAN coding practices. The revised code contains many improvements in appearance, error checking and in control of the output. The output is now tabulated to fit the typical 80 column window or terminal screen. The Segev method for resonance integral interpolation is now an option. Most of the dimension limitations have been removed and replaced with variable dimensions within a compile-time fixed container. The library is no longer restricted to the 69 energy group structure, and two new libraries have been generated for use with the code. The new libraries are both based on ENDF/B-VI data with one having the original 69 energy group structure and the second with a 172 group structure. The common source code can be used with PCs using both Windows 95 and NT, with a Linux based operating system and with UNIX based workstations. Comparisons of this version of the code to earlier evaluations with ENDF/B-V are provided, as well as, comparisons with the new libraries

Upgrades to the WIMS-ANL code

International Nuclear Information System (INIS)