Kinematics fingerprints of leader and follower role-taking during cooperative joint actions.

Science.gov (United States)

Sacheli, Lucia Maria; Tidoni, Emmanuele; Pavone, Enea Francesco; Aglioti, Salvatore Maria; Candidi, Matteo

2013-05-01

Performing online complementary motor adjustments is quintessential to joint actions since it allows interacting people to coordinate efficiently and achieve a common goal. We sought to determine whether, during dyadic interactions, signaling strategies and simulative processes are differentially implemented on the basis of the interactional role played by each partner. To this aim, we recorded the kinematics of the right hand of pairs of individuals who were asked to grasp as synchronously as possible a bottle-shaped object according to an imitative or complementary action schedule. Task requirements implied an asymmetric role assignment so that participants performed the task acting either as (1) Leader (i.e., receiving auditory information regarding the goal of the task with indications about where to grasp the object) or (2) Follower (i.e., receiving instructions to coordinate their movements with their partner's by performing imitative or complementary actions). Results showed that, when acting as Leader, participants used signaling strategies to enhance the predictability of their movements. In particular, they selectively emphasized kinematic parameters and reduced movement variability to provide the partner with implicit cues regarding the action to be jointly performed. Thus, Leaders make their movements more "communicative" even when not explicitly instructed to do so. Moreover, only when acting in the role of Follower did participants tend to imitate the Leader, even in complementary actions where imitation is detrimental to joint performance. Our results show that mimicking and signaling are implemented in joint actions according to the interactional role of the agent, which in turn is reflected in the kinematics of each partner.

Streamlined Approach for Environmental Restoration Work Plan for Corrective Action Unit 461: Joint Test Assembly Sites and Corrective Action Unit 495: Unconfirmed Joint Test Assembly Sites Tonopah Test Range, Nevada

Energy Technology Data Exchange (ETDEWEB)

Jeff Smith

1998-08-01

This Streamlined Approach for Environmental Restoration plan addresses the action necessary for the clean closure of Corrective Action Unit 461 (Test Area Joint Test Assembly Sites) and Corrective Action Unit 495 (Unconfirmed Joint Test Assembly Sites). The Corrective Action Units are located at the Tonopah Test Range in south central Nevada. Closure for these sites will be completed by excavating and evaluating the condition of each artillery round (if found); detonating the rounds (if necessary); excavating the impacted soil and debris; collecting verification samples; backfilling the excavations; disposing of the impacted soil and debris at an approved low-level waste repository at the Nevada Test Site

On the Nature of the Semiotic Structure of the Didactic Action: The Joint Action Theory in Didactics within a Comparative Approach

Science.gov (United States)

Sensevy, Gérard; Gruson, Brigitte; Forest, Dominique

2015-01-01

In this paper, we first sketch the joint action theory paradigm from a general viewpoint in sciences of culture. Then we specify this generic description by focusing on the joint action theory in didactics (JATD). We elaborate on three currently developed elements of the theory: the reticence-expression dialectics; the contract-milieu dialectics,…

Efficient strategy for detecting gene × gene joint action and its application in schizophrenia.

Science.gov (United States)

Won, Sungho; Kwon, Min-Seok; Mattheisen, Manuel; Park, Suyeon; Park, Changsoon; Kihara, Daisuke; Cichon, Sven; Ophoff, Roel; Nöthen, Markus M; Rietschel, Marcella; Baur, Max; Uitterlinden, Andre G; Hofmann, A; Lange, Christoph

2014-01-01

We propose a new approach to detect gene × gene joint action in genome-wide association studies (GWASs) for case-control designs. This approach offers an exhaustive search for all two-way joint action (including, as a special case, single gene action) that is computationally feasible at the genome-wide level and has reasonable statistical power under most genetic models. We found that the presence of any gene × gene joint action may imply differences in three types of genetic components: the minor allele frequencies and the amounts of Hardy-Weinberg disequilibrium may differ between cases and controls, and between the two genetic loci the degree of linkage disequilibrium may differ between cases and controls. Using Fisher's method, it is possible to combine the different sources of genetic information in an overall test for detecting gene × gene joint action. The proposed statistical analysis is efficient and its simplicity makes it applicable to GWASs. In the current study, we applied the proposed approach to a GWAS on schizophrenia and found several potential gene × gene interactions. Our application illustrates the practical advantage of the proposed method. © 2013 WILEY PERIODICALS, INC.

Joint action coordination in 2½- and 3-year-old children

NARCIS (Netherlands)

Meyer, M.; Bekkering, H.; Paulus, M.A.; Hunnius, S.

2010-01-01

When acting jointly with others, adults can be as proficient as when acting individually. However, how young children coordinate their actions with another person and how their action coordination develops during early childhood is not well understood. By means of a sequential button-pressing game,

Shared Action Spaces: a basis function framework for social re-calibration of sensorimotor representations supporting joint action

Directory of Open Access Journals (Sweden)

Giovanni ePezzulo

2013-11-01

Full Text Available The article explores the possibilities of formalizing and explaining the mechanisms that support spatial and social perspective alignment sustained over the duration of a social interaction. The basic proposed principle is that in social contexts the mechanisms for sensorimotor transformations and multisensory integration (learn to incorporate information relative to the other actor(s, similar to the "re-calibration" of visual receptive fields in response to repeated tool use. This process aligns or merges the co-actors' spatial representations and creates a "Shared Action Space" supporting key computations of social interactions and joint actions; for example, the remapping between the coordinate systems and frames of reference of the co-actors, including perspective taking, the sensorimotor transformations required for lifting jointly an object, and the predictions of the sensory effects of such joint action. The social re-calibration is proposed to be based on common basis function maps and could constitute an optimal solution to sensorimotor transformation and multisensory integration in joint action or more in general social interaction contexts. However, certain situations such as discrepant postural and viewpoint alignment and associated differences in perspectives between the co-actors could constrain the process quite differently. We discuss how alignment is achieved in the first place, and how it is maintained over time, providing a taxonomy of various forms and mechanisms of space alignment and overlap based, for instance, on automaticity vs. control of the transformations between the two agents. Finally, we discuss the link between low-level mechanisms for the sharing of space and high-level mechanisms for the sharing of cognitive representations.

Action Recognition by Joint Spatial-Temporal Motion Feature

Directory of Open Access Journals (Sweden)

Weihua Zhang

2013-01-01

Full Text Available This paper introduces a method for human action recognition based on optical flow motion features extraction. Automatic spatial and temporal alignments are combined together in order to encourage the temporal consistence on each action by an enhanced dynamic time warping (DTW algorithm. At the same time, a fast method based on coarse-to-fine DTW constraint to improve computational performance without reducing accuracy is induced. The main contributions of this study include (1 a joint spatial-temporal multiresolution optical flow computation method which can keep encoding more informative motion information than recent proposed methods, (2 an enhanced DTW method to improve temporal consistence of motion in action recognition, and (3 coarse-to-fine DTW constraint on motion features pyramids to speed up recognition performance. Using this method, high recognition accuracy is achieved on different action databases like Weizmann database and KTH database.

Rhythm in joint action: psychological and neurophysiological mechanisms for real-time interpersonal coordination

Science.gov (United States)

Keller, Peter E.; Novembre, Giacomo; Hove, Michael J.

2014-01-01

Human interaction often requires simultaneous precision and flexibility in the coordination of rhythmic behaviour between individuals engaged in joint activity, for example, playing a musical duet or dancing with a partner. This review article addresses the psychological processes and brain mechanisms that enable such rhythmic interpersonal coordination. First, an overview is given of research on the cognitive-motor processes that enable individuals to represent joint action goals and to anticipate, attend and adapt to other's actions in real time. Second, the neurophysiological mechanisms that underpin rhythmic interpersonal coordination are sought in studies of sensorimotor and cognitive processes that play a role in the representation and integration of self- and other-related actions within and between individuals' brains. Finally, relationships between social–psychological factors and rhythmic interpersonal coordination are considered from two perspectives, one concerning how social-cognitive tendencies (e.g. empathy) affect coordination, and the other concerning how coordination affects interpersonal affiliation, trust and prosocial behaviour. Our review highlights musical ensemble performance as an ecologically valid yet readily controlled domain for investigating rhythm in joint action. PMID:25385772

Thermal DBI action for the D3-brane at weak and strong coupling

DEFF Research Database (Denmark)

Grignani, Gianluca; Harmark, Troels; Marini, Andrea

2014-01-01

We study the effective action for finite-temperature D3-branes with an electromagnetic field at weak and strong coupling. We call this action the thermal DBI action. Comparing at low temperature the leading T4 correction for the thermal DBI action at weak and strong coupling we find that the 3/4 ...

Joint action on mental health at the workplace : situation analysis and recommendation for action

NARCIS (Netherlands)

Fine, A.; Griffiths, J.; Breucker, G.; Sochert, R.; Knoche, K.; Zabrocki, H.; Heigi, C.; Radonic, E.; Mattila-Holappa, P.; Buffet, M.A.; Houtman, I.L.D.; Gründemann, R.; Hulleman, J.; Nijland, B.; Kramberger, B.; Betlehem, J.; Pék, E..; Ingudottir, J.; Bjarnadottir, S.; Murray, P.; Xerri, R.

2015-01-01

The thematic “Mental Health at Workplaces” is part of the “Joint Action on Mental Health and Well-being”, an initiative which sits within the framework of the 2 nd European Health Programme of the European Commission and the Member States of the EU in the period 2013 to 2016. The main aim of this

Maximum Likelihood Joint Tracking and Association in Strong Clutter

Directory of Open Access Journals (Sweden)

Leonid I. Perlovsky

2013-01-01

Full Text Available We have developed a maximum likelihood formulation for a joint detection, tracking and association problem. An efficient non-combinatorial algorithm for this problem is developed in case of strong clutter for radar data. By using an iterative procedure of the dynamic logic process “from vague-to-crisp” explained in the paper, the new tracker overcomes the combinatorial complexity of tracking in highly-cluttered scenarios and results in an orders-of-magnitude improvement in signal-to-clutter ratio.

A Common Force-Sharing Pattern in Joint Action That Consists of Four People.

Science.gov (United States)

Masumoto, Junya; Inui, Nobuyuki

2017-12-20

The authors examined the force-sharing patterns in a joint action performed by a group of two, three, or four people compared with a solo action. In the joint actions, 28 participants produced periodic isometric forces such that the sum of forces they produced cycled between 5% and 10% maximum voluntary contraction with the right hand at 1 Hz. In both the three- and four-person tasks, the correlation between forces produced by two of the three or four participants was negative, and the remaining one or two participants produced intermediate forces. The errors of force and interval and force variabilities were smaller in four- and three-people groups than individuals. Four- and three-people groups thus performed better than individuals.

Single and joint action toxicity evaluation of insecticide and laundry ...

African Journals Online (AJOL)

Further analysis based on the isobologram model was in conformity with RTU and SR models. The significance of this study showed the relevance of joint action toxicity studies in setting realistic safe limits in order to protect aquatic organisms. Therefore, proper disposal and management strategies for wastes should be ...

Granger causality mapping during joint actions reveals evidence for forward models that could overcome sensory-motor delays.

Directory of Open Access Journals (Sweden)

Idil Kokal

Full Text Available Studies investigating joint actions have suggested a central role for the putative mirror neuron system (pMNS because of the close link between perception and action provided by these brain regions [1], [2], [3]. In contrast, our previous functional magnetic resonance imaging (fMRI experiment demonstrated that the BOLD response of the pMNS does not suggest that it directly integrates observed and executed actions during joint actions [4]. To test whether the pMNS might contribute indirectly to the integration process by sending information to brain areas responsible for this integration (integration network, here we used Granger causality mapping (GCM [5]. We explored the directional information flow between the anterior sites of the pMNS and previously identified integrative brain regions. We found that the left BA44 sent more information than it received to both the integration network (left thalamus, right middle occipital gyrus and cerebellum and more posterior nodes of the pMNS (BA2. Thus, during joint actions, two anatomically separate networks therefore seem effectively connected and the information flow is predominantly from anterior to posterior areas of the brain. These findings suggest that the pMNS is involved indirectly in joint actions by transforming observed and executed actions into a common code and is part of a generative model that could predict the future somatosensory and visual consequences of observed and executed actions in order to overcome otherwise inevitable neural delays.

Joint action of some usable important broadleaf herbicides in sugar beet

Directory of Open Access Journals (Sweden)

AliAsghar Chitband

2018-01-01

Full Text Available Introduction: The assessment of the effect of mixtures could be based on various concepts whether we work within toxicology, pharmacology or weed control. Combinations of certain herbicides can give better weed control than use of the individual herbicide alone and/or loss of weed control when use of certain other herbicides in combination. Predicting the joint action of mixtures is extremely difficult, unless the compounds are known to interact at the same site of action. These most common methods to analyze the joint action of herbicide mixtures are the Additive Dose Model (ADM or the Multiplicative Survival Model (MSM. The ADM assumes the two compounds have similar modes of action (do not interact in the receiver plant, i.e. effective doses of each component will not change by mixing. ADM has been widely accepted as a valid method to estimate joint action of mixtures sharing the same or similar action mechanisms in the receiver plant. MSM has been reported to yield more accurate results for mixture toxicity than ADM do when the components exhibited different or dissimilar modes of action in the receiver plant. ADM or Concentration Addition (CA is used here to test for deviation of additivity of doses using the ADM isoboles as reference; any deviation from the ADM is characterized by antagonism when the efficacy of a mixture is lower than predicted by the reference model and synergistic when the efficacy is higher than predicted. Materials and Methods: In order to determine joint action of some usable important broadleaf herbicides in sugar beet, six experiments were conducted at the research glasshouse in Faculty of Agriculture, Ferdowsi University of Mashhad, Iran. The plants were sprayed with seven doses of commercial formulation of desmedipham + phenmedipham + ethofumesate (Betanal Progress- OF®, 427 g a.i. L-1, Tragusa, Spain, chloridazon (Pyramin®, 1361 g a.i. L-1, BASF, Germany, clopyralid (Lontrel®, 149 g a.i. L-1, Golsam, Gorgan

Joint action syntax in Japanese martial arts.

Science.gov (United States)

Yamamoto, Yuji; Yokoyama, Keiko; Okumura, Motoki; Kijima, Akifumi; Kadota, Koji; Gohara, Kazutoshi

2013-01-01

Participation in interpersonal competitions, such as fencing or Japanese martial arts, requires players to make instantaneous decisions and execute appropriate motor behaviors in response to various situations. Such actions can be understood as complex phenomena emerging from simple principles. We examined the intentional switching dynamics associated with continuous movement during interpersonal competition in terms of their emergence from a simple syntax. Linear functions on return maps identified two attractors as well as the transitions between them. The effects of skill differences were evident in the second- and third-order state-transition diagrams for these two attractors. Our results suggest that abrupt switching between attractors is related to the diverse continuous movements resulting from quick responses to sudden changes in the environment. This abrupt-switching-quick-response behavior is characterized by a joint action syntax. The resulting hybrid dynamical system is composed of a higher module with discrete dynamics and a lower module with continuous dynamics. Our results suggest that intelligent human behavior and robust autonomy in real-life scenarios are based on this hybrid dynamical system, which connects interpersonal coordination and competition.

Joint Facial Action Unit Detection and Feature Fusion: A Multi-conditional Learning Approach.

Science.gov (United States)

Eleftheriadis, Stefanos; Rudovic, Ognjen; Pantic, Maja

2016-10-05

Automated analysis of facial expressions can benefit many domains, from marketing to clinical diagnosis of neurodevelopmental disorders. Facial expressions are typically encoded as a combination of facial muscle activations, i.e., action units. Depending on context, these action units co-occur in specific patterns, and rarely in isolation. Yet, most existing methods for automatic action unit detection fail to exploit dependencies among them, and the corresponding facial features. To address this, we propose a novel multi-conditional latent variable model for simultaneous fusion of facial features and joint action unit detection. Specifically, the proposed model performs feature fusion in a generative fashion via a low-dimensional shared subspace, while simultaneously performing action unit detection using a discriminative classification approach. We show that by combining the merits of both approaches, the proposed methodology outperforms existing purely discriminative/generative methods for the target task. To reduce the number of parameters, and avoid overfitting, a novel Bayesian learning approach based on Monte Carlo sampling is proposed, to integrate out the shared subspace. We validate the proposed method on posed and spontaneous data from three publicly available datasets (CK+, DISFA and Shoulder-pain), and show that both feature fusion and joint learning of action units leads to improved performance compared to the state-of-the-art methods for the task.

The Joint Action Effect on Memory as a Social Phenomenon: The Role of Cued Attention and Psychological Distance

Directory of Open Access Journals (Sweden)

Ullrich Wagner

2017-10-01

Full Text Available In contrast to individual tasks, a specific social setting is created when two partners work together on a task. How does such a social setting affect memory for task-related information? We addressed this issue in a distributed joint-action paradigm, where two team partners respond to different types of information within the same task. Previous work has shown that joint action in such a task enhances memory for items that are relevant to the partner’s task but not to the own task. By removing critical, non-social confounds, we wanted to pinpoint the social nature of this selective memory advantage. Specifically, we created joint task conditions in which participants were aware of the shared nature of the concurrent task but could not perceive sensory cues to the other’s responses. For a differentiated analysis of the social parameters, we also varied the distance between partners. We found that the joint action effect emerged even without sensory cues from the partner, and it declined with increasing distance between partners. These results support the notion that the joint-action effect on memory is in its core driven by the experience of social co-presence, and does not simply emerge as a by-product of partner-generated sensory cues.

Motor simulation and the coordination of self and other in real-time joint action.

Science.gov (United States)

Novembre, Giacomo; Ticini, Luca F; Schütz-Bosbach, Simone; Keller, Peter E

2014-08-01

Joint actions require the integration of simultaneous self- and other-related behaviour. Here, we investigated whether this function is underpinned by motor simulation, that is the capacity to represent a perceived action in terms of the neural resources required to execute it. This was tested in a music performance experiment wherein on-line brain stimulation (double-pulse transcranial magnetic stimulation, dTMS) was employed to interfere with motor simulation. Pianists played the right-hand part of piano pieces in synchrony with a recording of the left-hand part, which had (Trained) or had not (Untrained) been practiced beforehand. Training was assumed to enhance motor simulation. The task required adaptation to tempo changes in the left-hand part that, in critical conditions, were preceded by dTMS delivered over the right primary motor cortex. Accuracy of tempo adaptation following dTMS or sham stimulations was compared across Trained and Untrained conditions. Results indicate that dTMS impaired tempo adaptation accuracy only during the perception of trained actions. The magnitude of this interference was greater in empathic individuals possessing a strong tendency to adopt others' perspectives. These findings suggest that motor simulation provides a functional resource for the temporal coordination of one's own behaviour with others in dynamic social contexts. © The Author (2013). Published by Oxford University Press. For Permissions, please email: journals.permissions@oup.com.

Joint action aesthetics.

Directory of Open Access Journals (Sweden)

Staci Vicary

Full Text Available Synchronized movement is a ubiquitous feature of dance and music performance. Much research into the evolutionary origins of these cultural practices has focused on why humans perform rather than watch or listen to dance and music. In this study, we show that movement synchrony among a group of performers predicts the aesthetic appreciation of live dance performances. We developed a choreography that continuously manipulated group synchronization using a defined movement vocabulary based on arm swinging, walking and running. The choreography was performed live to four audiences, as we continuously tracked the performers' movements, and the spectators' affective responses. We computed dynamic synchrony among performers using cross recurrence analysis of data from wrist accelerometers, and implicit measures of arousal from spectators' heart rates. Additionally, a subset of spectators provided continuous ratings of enjoyment and perceived synchrony using tablet computers. Granger causality analyses demonstrate predictive relationships between synchrony, enjoyment ratings and spectator arousal, if audiences form a collectively consistent positive or negative aesthetic evaluation. Controlling for the influence of overall movement acceleration and visual change, we show that dance communicates group coordination via coupled movement dynamics among a group of performers. Our findings are in line with an evolutionary function of dance-and perhaps all performing arts-in transmitting social signals between groups of people. Human movement is the common denominator of dance, music and theatre. Acknowledging the time-sensitive and immediate nature of the performer-spectator relationship, our study makes a significant step towards an aesthetics of joint actions in the performing arts.

Joint action aesthetics

Science.gov (United States)

Vicary, Staci; Sperling, Matthias; von Zimmermann, Jorina; Richardson, Daniel C.

2017-01-01

Synchronized movement is a ubiquitous feature of dance and music performance. Much research into the evolutionary origins of these cultural practices has focused on why humans perform rather than watch or listen to dance and music. In this study, we show that movement synchrony among a group of performers predicts the aesthetic appreciation of live dance performances. We developed a choreography that continuously manipulated group synchronization using a defined movement vocabulary based on arm swinging, walking and running. The choreography was performed live to four audiences, as we continuously tracked the performers’ movements, and the spectators’ affective responses. We computed dynamic synchrony among performers using cross recurrence analysis of data from wrist accelerometers, and implicit measures of arousal from spectators’ heart rates. Additionally, a subset of spectators provided continuous ratings of enjoyment and perceived synchrony using tablet computers. Granger causality analyses demonstrate predictive relationships between synchrony, enjoyment ratings and spectator arousal, if audiences form a collectively consistent positive or negative aesthetic evaluation. Controlling for the influence of overall movement acceleration and visual change, we show that dance communicates group coordination via coupled movement dynamics among a group of performers. Our findings are in line with an evolutionary function of dance–and perhaps all performing arts–in transmitting social signals between groups of people. Human movement is the common denominator of dance, music and theatre. Acknowledging the time-sensitive and immediate nature of the performer-spectator relationship, our study makes a significant step towards an aesthetics of joint actions in the performing arts. PMID:28742849

Joint action aesthetics.

Science.gov (United States)

Vicary, Staci; Sperling, Matthias; von Zimmermann, Jorina; Richardson, Daniel C; Orgs, Guido

2017-01-01

Synchronized movement is a ubiquitous feature of dance and music performance. Much research into the evolutionary origins of these cultural practices has focused on why humans perform rather than watch or listen to dance and music. In this study, we show that movement synchrony among a group of performers predicts the aesthetic appreciation of live dance performances. We developed a choreography that continuously manipulated group synchronization using a defined movement vocabulary based on arm swinging, walking and running. The choreography was performed live to four audiences, as we continuously tracked the performers' movements, and the spectators' affective responses. We computed dynamic synchrony among performers using cross recurrence analysis of data from wrist accelerometers, and implicit measures of arousal from spectators' heart rates. Additionally, a subset of spectators provided continuous ratings of enjoyment and perceived synchrony using tablet computers. Granger causality analyses demonstrate predictive relationships between synchrony, enjoyment ratings and spectator arousal, if audiences form a collectively consistent positive or negative aesthetic evaluation. Controlling for the influence of overall movement acceleration and visual change, we show that dance communicates group coordination via coupled movement dynamics among a group of performers. Our findings are in line with an evolutionary function of dance-and perhaps all performing arts-in transmitting social signals between groups of people. Human movement is the common denominator of dance, music and theatre. Acknowledging the time-sensitive and immediate nature of the performer-spectator relationship, our study makes a significant step towards an aesthetics of joint actions in the performing arts.

Taking two to tango: fMRI analysis of improvised joint action with physical contact

Science.gov (United States)

Belyk, Michel; Brown, Steven

2018-01-01

Many forms of joint action involve physical coupling between the participants, such as when moving a sofa together or dancing a tango. We report the results of a novel two-person functional MRI study in which trained couple dancers engaged in bimanual contact with an experimenter standing next to the bore of the magnet, and in which the two alternated between being the leader and the follower of joint improvised movements. Leading showed a general pattern of self-orientation, being associated with brain areas involved in motor planning, navigation, sequencing, action monitoring, and error correction. In contrast, following showed a far more sensory, externally-oriented pattern, revealing areas involved in somatosensation, proprioception, motion tracking, social cognition, and outcome monitoring. We also had participants perform a “mutual” condition in which the movement patterns were pre-learned and the roles were symmetric, thereby minimizing any tendency toward either leading or following. The mutual condition showed greater activity in brain areas involved in mentalizing and social reward than did leading or following. Finally, the analysis of improvisation revealed the dual importance of motor-planning and working-memory areas. We discuss these results in terms of theories of both joint action and improvisation. PMID:29324862

How preschoolers and adults represent their joint action partner's behavior.

Science.gov (United States)

Sacheli, Lucia Maria; Meyer, M; Hartstra, E; Bekkering, H; Hunnius, S

2017-10-24

We investigated the cognitive mechanisms underlying turn-taking joint action in 42-month-old children (Experiment 1) and adults (Experiment 2) using a behavioral task of dressing a virtual bear together. We aimed to investigate how participants represent a partners' behavior, i.e., in terms of specific action kinematics or of action effects. The bear was dressed by pressing a smaller and a bigger button. In the Action-response task, instructions asked participants to respond to the partner by pressing the same or opposite button; in the Action-effect task they had to respond to the partner's action effect by dressing the bear with the lacking part of the clothing, which in some cases implied pressing the same button and in other cases implied pressing the opposite button. In 50% of the trials, the partner's association between each button and the ensuing effect (dressing the bear with t-shirt or pants) was reversed, while it never changed for participants. Both children and adults showed no effect of physical congruency of actions, but showed impaired performance in the Action-effect task if their partner achieved her effect through a different action-effect association than their own. These results suggest that, when encoding their partner's actions, agents are influenced by action-effect associations that they learnt through their own experience. While interference led to overt errors in children, it caused longer reaction times in adults, suggesting that a flexible cognitive control (that is still in development in young children) is required to take on the partner's perspective.

EVALUATING THE TARGET, EFFECT, ACTION INTERACTION (TEA MODEL OF SPINAL MANIPULATION THERAPY ON SACROILIAC JOINT DYSFUNCTION

Directory of Open Access Journals (Sweden)

Muhammad Salman Bashir

2017-08-01

Full Text Available Background: In physical therapy, usually the effects of treatment on any condition will be evaluated based on the mode of action on the target tissue. Some treatments will have direct and indirect effects. Due to indirect effects, there may be changes in other tissues or systems in and around the target tissue. The interaction between target, effect, and action was studied under TEA model. In sacroiliac joint dysfunction, Muscle Energy Technique (MET and Spinal Manipulation Therapy (SMT were proved as useful treatment approaches but one is targeted on muscles (MET the other targets on joint (SMT. The indirect effects of both the approaches can’t be neglected. This study focused on evaluating indirect effects of SMT. Methods: A pilot study was conducted to see the effect of Spinal Manipulation Therapy on muscles (Transverse Abdominus, Internal Oblique when applied in patients with sacroiliac joint dysfunction. 44 subjects diagnosed with sacroiliac joint dysfunction were recruited in the study. Resting thickness was measured by ultrasound before and after Spinal Manipulation Therapy. SPSS version 17 was used for statistical analysis. Paired t-test compared pre and post test results. Results: After conducting Pilot study revealed that Pre resting thickness of Transverse Abdominus and Internal Oblique is (3.5±0.10 and (5.47± 0.15 Post resting Thickness of TrA (Transverse Abdominus and Internal Oblique (IO is (3.90±0.12 and (7.63±0.80 Results are significant as P-Value 0.000 that is <0.05. Conclusion: Here is concluded that SMT is a useful method to treat muscles through its direct action is on the Sacroiliac joint in Sacroiliac joint dysfunction. So we can use it for treating muscles by applying on joints (Indirect method.

Strategic communication and behavioral coupling in asymmetric joint action

DEFF Research Database (Denmark)

Vesper, Cordula; Richardson, Michael J.

2014-01-01

How is coordination achieved in asymmetric joint actions where co-actors have unequal access to task information? Pairs of participants performed a non-verbal tapping task with the goal of synchronizing taps to different targets. We tested whether ‘Leaders’ knowing the target locations would...... support ‘Followers’ without this information. Experiment 1 showed that Leaders tapped with higher amplitude that also scaled with specific target distance, thereby emphasizing differences between correct targets and possible alternatives. This strategic communication only occurred when Leaders’ movements...

Automatic control of positioning along the joint during EBW in conditions of action of magnetic fields

Science.gov (United States)

Druzhinina, A. A.; Laptenok, V. D.; Murygin, A. V.; Laptenok, P. V.

2016-11-01

Positioning along the joint during the electron beam welding is a difficult scientific and technical problem to achieve the high quality of welds. The final solution of this problem is not found. This is caused by weak interference protection of sensors of the joint position directly in the welding process. Frequently during the electron beam welding magnetic fields deflect the electron beam from the optical axis of the electron beam gun. The collimated X-ray sensor is used to monitor the beam deflection caused by the action of magnetic fields. Signal of X-ray sensor is processed by the method of synchronous detection. Analysis of spectral characteristics of the X-ray sensor showed that the displacement of the joint from the optical axis of the gun affects on the output signal of sensor. The authors propose dual-circuit system for automatic positioning of the electron beam on the joint during the electron beam welding in conditions of action of magnetic interference. This system includes a contour of joint tracking and contour of compensation of magnetic fields. The proposed system is stable. Calculation of dynamic error of system showed that error of positioning does not exceed permissible deviation of the electron beam from the joint plane.

An analysis of the possibility for health implications of joint actions and interactions between food additives

NARCIS (Netherlands)

Groten, J.P.; Butler, W.; Feron, V.J.; Kozianowski, G.; Renwick, A.G.; Walker, R.

2000-01-01

The possibility that structurally unrelated food additives could show either joint actions or interactions has been assessed based on their potential to share common sites and mechanisms of action or common pathways of elimination. All food additives approved in the European Union and allocated

Effective action for superfluid Fermi systems in the strong-coupling limit

Science.gov (United States)

Dupuis, N.

2005-07-01

We derive the low-energy effective action for three-dimensional superfluid Fermi systems in the strong-coupling limit, where superfluidity originates from Bose-Einstein condensation of composite bosons. Taking into account density and pairing fluctuations on the same footing, we show that the effective action involves only the fermion density ρr and its conjugate variable, the phase θr of the pairing order parameter Δr . We recover the standard action of a Bose superfluid of density ρr/2 , where the bosons have a mass mB=2m and interact via a repulsive contact potential with amplitude gB=4πaB/mB,aB=2a ( a the s -wave scattering length associated to the fermion-fermion interaction in vacuum). For lattice models, the derivation of the effective action is based on the mapping of the attractive Hubbard model onto the Heisenberg model in a uniform magnetic field, and a coherent state path integral representation of the partition function. The effective description of the Fermi superfluid in the strong-coupling limit is a Bose-Hubbard model with an intersite hopping amplitude tB=J/2 and an on-site repulsive interaction UB=2Jz , where J=4t2/U ( t and -U are the intersite hopping amplitude and the on-site attraction in the (fermionic) Hubbard model, z the number of nearest-neighbor sites).

Joint statistics of strongly correlated neurons via dimensionality reduction

International Nuclear Information System (INIS)

Deniz, Taşkın; Rotter, Stefan

2017-01-01

The relative timing of action potentials in neurons recorded from local cortical networks often shows a non-trivial dependence, which is then quantified by cross-correlation functions. Theoretical models emphasize that such spike train correlations are an inevitable consequence of two neurons being part of the same network and sharing some synaptic input. For non-linear neuron models, however, explicit correlation functions are difficult to compute analytically, and perturbative methods work only for weak shared input. In order to treat strong correlations, we suggest here an alternative non-perturbative method. Specifically, we study the case of two leaky integrate-and-fire neurons with strong shared input. Correlation functions derived from simulated spike trains fit our theoretical predictions very accurately. Using our method, we computed the non-linear correlation transfer as well as correlation functions that are asymmetric due to inhomogeneous intrinsic parameters or unequal input. (paper)

Effective action for superfluid Fermi systems in the strong-coupling limit

International Nuclear Information System (INIS)

Dupuis, N.

2005-01-01

We derive the low-energy effective action for three-dimensional superfluid Fermi systems in the strong-coupling limit, where superfluidity originates from Bose-Einstein condensation of composite bosons. Taking into account density and pairing fluctuations on the same footing, we show that the effective action involves only the fermion density ρ r and its conjugate variable, the phase θ r of the pairing order parameter Δ r . We recover the standard action of a Bose superfluid of density ρ r /2, where the bosons have a mass m B =2m and interact via a repulsive contact potential with amplitude g B =4πa B /m B ,a B =2a (a the s-wave scattering length associated to the fermion-fermion interaction in vacuum). For lattice models, the derivation of the effective action is based on the mapping of the attractive Hubbard model onto the Heisenberg model in a uniform magnetic field, and a coherent state path integral representation of the partition function. The effective description of the Fermi superfluid in the strong-coupling limit is a Bose-Hubbard model with an intersite hopping amplitude t B =J/2 and an on-site repulsive interaction U B =2Jz, where J=4t 2 /U (t and -U are the intersite hopping amplitude and the on-site attraction in the (fermionic) Hubbard model, z the number of nearest-neighbor sites)

Forelimb muscle and joint actions in Archosauria: insights from Crocodylus johnstoni (Pseudosuchia and Mussaurus patagonicus (Sauropodomorpha

Directory of Open Access Journals (Sweden)

Alejandro Otero

2017-11-01

Full Text Available Many of the major locomotor transitions during the evolution of Archosauria, the lineage including crocodiles and birds as well as extinct Dinosauria, were shifts from quadrupedalism to bipedalism (and vice versa. Those occurred within a continuum between more sprawling and erect modes of locomotion and involved drastic changes of limb anatomy and function in several lineages, including sauropodomorph dinosaurs. We present biomechanical computer models of two locomotor extremes within Archosauria in an analysis of joint ranges of motion and the moment arms of the major forelimb muscles in order to quantify biomechanical differences between more sprawling, pseudosuchian (represented the crocodile Crocodylus johnstoni and more erect, dinosaurian (represented by the sauropodomorph Mussaurus patagonicus modes of forelimb function. We compare these two locomotor extremes in terms of the reconstructed musculoskeletal anatomy, ranges of motion of the forelimb joints and the moment arm patterns of muscles across those ranges of joint motion. We reconstructed the three-dimensional paths of 30 muscles acting around the shoulder, elbow and wrist joints. We explicitly evaluate how forelimb joint mobility and muscle actions may have changed with postural and anatomical alterations from basal archosaurs to early sauropodomorphs. We thus evaluate in which ways forelimb posture was correlated with muscle leverage, and how such differences fit into a broader evolutionary context (i.e. transition from sprawling quadrupedalism to erect bipedalism and then shifting to graviportal quadrupedalism. Our analysis reveals major differences of muscle actions between the more sprawling and erect models at the shoulder joint. These differences are related not only to the articular surfaces but also to the orientation of the scapula, in which extension/flexion movements in Crocodylus (e.g. protraction of the humerus correspond to elevation/depression in Mussaurus. Muscle

Joint Contribution of Left Dorsal Premotor Cortex and Supramarginal Gyrus to Rapid Action Reprogramming

DEFF Research Database (Denmark)

Hartwigsen, Gesa; Siebner, Hartwig R

2015-01-01

human subjects performed a spatially-precued reaction time task. RESULTS: Relative to sham rTMS, effective online perturbation of left PMd significantly impaired both the response speed and accuracy in trials that were invalidly pre-cued and required the subject to reprogram the prepared action......BACKGROUND: The rapid adaptation of actions to changes in the environment is crucial for survival. We previously demonstrated a joint contribution of left dorsal premotor cortex (PMd) and left supramarginal gyrus (SMG) to action reprogramming. However, we did not probe the contribution of PMd...... to the speed and accuracy of action reprogramming and how the functional relevance of PMd changes in the presence of a dysfunctional SMG. OBJECTIVE: This study further dissociated the unique contribution of left PMd and SMG to action reprogramming. Specifically, we tested whether the critical contribution...

Does ankle joint power reflect type of muscle action of soleus and gastrocnemius during walking in cats and humans?

Science.gov (United States)

Cronin, Neil J; Prilutsky, Boris I; Lichtwark, Glen A; Maas, Huub

2013-04-26

The main objective of this paper is to highlight the difficulties of identifying shortening and lengthening contractions based on analysis of power produced by resultant joint moments. For that purpose, we present net ankle joint powers and muscle fascicle/muscle-tendon unit (MTU) velocities for medial gastrocnemius (MG) and soleus (SO) muscles during walking in species of different size (humans and cats). For the cat, patterns of ankle joint power and MTU velocity of MG and SO during stance were similar: negative power (ankle moment×angular velocityankle joint power and fascicle velocity patterns were observed for MG muscle. In humans, like cats, the patterns of ankle joint power and MTU velocity of SO and MG were similar. Unlike the cat, there were substantial differences between patterns of fascicle velocity and ankle joint power during stance in both muscles. These results indicate that during walking, only a small fraction of mechanical work of the ankle moment is either generated or absorbed by the muscle fascicles, thus confirming the contribution of in-series elastic structures and/or energy transfer via two-joint muscles. We conclude that ankle joint negative power does not necessarily indicate eccentric action of muscle fibers and that positive power cannot be exclusively attributed to muscle concentric action, especially in humans. Copyright © 2013 Elsevier Ltd. All rights reserved.

Osteochondral lesions in distal tarsal joints of Icelandic horses reveal strong associations between hyaline and calcified cartilage abnormalities.

Science.gov (United States)

Ley, C J; Ekman, S; Hansson, K; Björnsdóttir, S; Boyde, A

2014-03-25

Osteochondral lesions in the joints of the distal tarsal region of young Icelandic horses provide a natural model for the early stages of osteoarthritis (OA) in low-motion joints. We describe and characterise mineralised and non-mineralised osteochondral lesions in left distal tarsal region joint specimens from twenty-two 30 ±1 month-old Icelandic horses. Combinations of confocal scanning light microscopy, backscattered electron scanning electron microscopy (including, importantly, iodine staining) and three-dimensional microcomputed tomography were used on specimens obtained with guidance from clinical imaging. Lesion-types were described and classified into groups according to morphological features. Their locations in the hyaline articular cartilage (HAC), articular calcified cartilage (ACC), subchondral bone (SCB) and the joint margin tissues were identified and their frequency in the joints recorded. Associations and correlations between lesion-types were investigated for centrodistal joints only. In centrodistal joints the lesion-types HAC chondrocyte loss, HAC fibrillation, HAC central chondrocyte clusters, ACC arrest and ACC advance had significant associations and strong correlations. These lesion-types had moderate to high frequency in centrodistal joints but low frequencies in tarsometatarsal and talocalcaneal-centroquartal joints. Joint margin lesion-types had no significant associations with other lesion-types in the centrodistal joints but high frequency in both the centrodistal and tarsometatarsal joints. The frequency of SCB lesion-types in all joints was low. Hypermineralised infill phase lesion-types were detected. Our results emphasise close associations between HAC and ACC lesions in equine centrodistal joints and the importance of ACC lesions in the development of OA in low-motion compression-loaded equine joints.

Joint Action Group: public opinion poll: final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-12-31

The Joint Action Group (JAG) for Environmental Cleanup of the Muggah Creek Watershed in Cape Breton, Nova Scotia is a new community-driven process in which a group of individuals have cooperated in one of the largest remediation projects in Canada. The group plays an advisory role to the government in identifying what should be done to remediate the Muggah Creek watershed and the Sydney Tar Ponds. The Muggah Creek watershed area includes a municipal landfill site, the coke ovens site and the Muggah Creek estuary (Sydney Tar Ponds). This report contains an analysis of the responses of a sample of 600 households in industrial Cape Breton to a telephone survey designed to measure community awareness and knowledge of JAG, its working groups, and the Muggah Creek Watershed Cleanup process, and identify community concerns regarding the process. tabs.

Joint Action Group: public opinion poll: final report

International Nuclear Information System (INIS)

1998-01-01

The Joint Action Group (JAG) for Environmental Cleanup of the Muggah Creek Watershed in Cape Breton, Nova Scotia is a new community-driven process in which a group of individuals have cooperated in one of the largest remediation projects in Canada. The group plays an advisory role to the government in identifying what should be done to remediate the Muggah Creek watershed and the Sydney Tar Ponds. The Muggah Creek watershed area includes a municipal landfill site, the coke ovens site and the Muggah Creek estuary (Sydney Tar Ponds). This report contains an analysis of the responses of a sample of 600 households in industrial Cape Breton to a telephone survey designed to measure community awareness and knowledge of JAG, its working groups, and the Muggah Creek Watershed Cleanup process, and identify community concerns regarding the process. tabs

Osteochondral lesions in distal tarsal joints of Icelandic horses reveal strong associations between hyaline and calcified cartilage abnormalities

Directory of Open Access Journals (Sweden)

CJ Ley

2014-03-01

Full Text Available Osteochondral lesions in the joints of the distal tarsal region of young Icelandic horses provide a natural model for the early stages of osteoarthritis (OA in low-motion joints. We describe and characterise mineralised and non-mineralised osteochondral lesions in left distal tarsal region joint specimens from twenty-two 30 ±1 month-old Icelandic horses. Combinations of confocal scanning light microscopy, backscattered electron scanning electron microscopy (including, importantly, iodine staining and three-dimensional microcomputed tomography were used on specimens obtained with guidance from clinical imaging. Lesion-types were described and classified into groups according to morphological features. Their locations in the hyaline articular cartilage (HAC, articular calcified cartilage (ACC, subchondral bone (SCB and the joint margin tissues were identified and their frequency in the joints recorded. Associations and correlations between lesion-types were investigated for centrodistal joints only. In centrodistal joints the lesion-types HAC chondrocyte loss, HAC fibrillation, HAC central chondrocyte clusters, ACC arrest and ACC advance had significant associations and strong correlations. These lesion-types had moderate to high frequency in centrodistal joints but low frequencies in tarsometatarsal and talocalcaneal-centroquartal joints. Joint margin lesion-types had no significant associations with other lesion-types in the centrodistal joints but high frequency in both the centrodistal and tarsometatarsal joints. The frequency of SCB lesion-types in all joints was low. Hypermineralised infill phase lesion-types were detected. Our results emphasise close associations between HAC and ACC lesions in equine centrodistal joints and the importance of ACC lesions in the development of OA in low-motion compression-loaded equine joints.

Analysing the Continuity of Teaching and Learning in Classroom Actions: When the Joint Action Framework in Didactics Meets the Pragmatist Approach to Classroom Discourses

Science.gov (United States)

Ligozat, Florence; Lundqvist, Eva; Amade-Escot, Chantal

2018-01-01

One strand of comparative didactics aims at discussing the relationships between the theoretical constructions developed within subject didactics and how these can contribute to research about teaching and learning. This article explores the relationships between categories for analysing joint actions of teacher and students (didactic contract,…

Joint association of nicotinic acetylcholine receptor variants with abdominal obesity in American Indians: the Strong Heart Family Study.

Science.gov (United States)

Zhu, Yun; Yang, Jingyun; Yeh, Fawn; Cole, Shelley A; Haack, Karin; Lee, Elisa T; Howard, Barbara V; Zhao, Jinying

2014-01-01

Cigarette smoke is a strong risk factor for obesity and cardiovascular disease. The effect of genetic variants involved in nicotine metabolism on obesity or body composition has not been well studied. Though many genetic variants have previously been associated with adiposity or body fat distribution, a single variant usually confers a minimal individual risk. The goal of this study is to evaluate the joint association of multiple variants involved in cigarette smoke or nicotine dependence with obesity-related phenotypes in American Indians. To achieve this goal, we genotyped 61 tagSNPs in seven genes encoding nicotine acetylcholine receptors (nAChRs) in 3,665 American Indians participating in the Strong Heart Family Study. Single SNP association with obesity-related traits was tested using family-based association, adjusting for traditional risk factors including smoking. Joint association of all SNPs in the seven nAChRs genes were examined by gene-family analysis based on weighted truncated product method (TPM). Multiple testing was controlled by false discovery rate (FDR). Results demonstrate that multiple SNPs showed weak individual association with one or more measures of obesity, but none survived correction for multiple testing. However, gene-family analysis revealed significant associations with waist circumference (p = 0.0001) and waist-to-hip ratio (p = 0.0001), but not body mass index (p = 0.20) and percent body fat (p = 0.29), indicating that genetic variants are jointly associated with abdominal, but not general, obesity among American Indians. The observed combined genetic effect is independent of cigarette smoking per se. In conclusion, multiple variants in the nAChR gene family are jointly associated with abdominal obesity in American Indians, independent of general obesity and cigarette smoking per se.

The joint discourse 'reflexive sustainable development'. From weak towards strong sustainable development

International Nuclear Information System (INIS)

Nilsen, Heidi Rapp

2010-01-01

The purpose of this paper is to contribute towards moving the predominant situation of weak sustainable development (WSD) in the direction of strong sustainable development (SSD). More people - academics, politicians, bureaucrats and laymen alike - need to recognize SSD as an alternative to WSD. A joint discourse of WSD and SSD is suggested, called reflexive sustainable development. Here, advocates of WSD and SSD must argue for each specific case why their solution is better. This will expose, amongst other things, the ethical foundations which form part of resulting policy advice. Reflexive sustainable development is to be framed in discourse ethics, thereby remedying the power imbalance and allowing for substantial discussion. Reflexive sustainable development builds on a common theoretical base but will not lead to consensus in all matters. A family metaphor is introduced to inspire a discourse of both consensus and compromise. (author)

Joint sciences academies statement: global response to climate change

International Nuclear Information System (INIS)

2005-06-01

Taking into account that there is now strong evidence that significant global warming is occurring, the Joint Science Academies, urge, by this statement, all nations in the line with the UNFCCC principles, to take prompt action to reduce the causes of climate change, adapt to its impacts and ensure that the issue is included in all relevant national and international strategies. Some recommendations are also given. (A.L.B.)

Risk-Based Decision-Making and the Use of Operational Risk Management in Developing a Course of Action (COA) for the Joint Task Force (JTF)

National Research Council Canada - National Science Library

Faherty, Denis

2003-01-01

Uncertainty and risk are inherent in the nature of military action. The success of any joint military operation is based upon a willingness to balance risk with opportunity in taking bold, decisive action necessary to triumph in war...

Interbrains cooperation: Hyperscanning and self-perception in joint actions.

Science.gov (United States)

Balconi, Michela; Vanutelli, Maria Elide

2017-08-01

The aim of the present study was to investigate the neural bases of cooperative behaviors and social self-perception underlying the execution of joint actions by using a hyperscanning brain paradigm with functional near-infrared spectroscopy (fNIRS). We firstly found that an artificial positive feedback on the cognitive performance was able to affect the self-perception of social position and hierarchy (higher social ranking) for the dyad, as well as the cognitive performance (decreased error rate, ER, and response times, RTs). In addition, the shared cognitive strategy was concurrently improved within the dyad after this social reinforcing. Secondly, fNIRS measures revealed an increased brain activity in the postfeedback condition for the dyad. Moreover, an interbrain similarity was found for the dyads during the task, with higher coherent prefrontal cortex (PFC) activity for the interagents in the postfeedback condition. Finally, a significant prefrontal brain lateralization effect was revealed, with the left hemisphere being more engaged during the postfeedback condition. To summarize, the self-perception, the cognitive performance, and the shared brain activity were all reinforced by the social feedback within the dyad.

Mechanical effects of strong measurement: back-action noise and cooling

Science.gov (United States)

Schwab, Keith

2007-03-01

Our recent experiments show that it is now possible to prepare and measure mechanical systems with thermal occupation factors of N˜25 and perform continuous position measurements close to the limits required by the Heisenberg Uncertainty Principle (1). I will discuss our back-action measurements with nanomechanical structures strongly coupled to single electron transistors. We have been able to observe the stochastic back-action forces exerted by the SET as well as a cooling effect which has analogies to cooling in optical cavities. Furthermore, I will discuss progress using optical fields coupled to mechanical modes which show substantial cooling using the pondermotive effects of the photons impacting a flexible dielectric mirror (2). Both of these techniques pave the way to demonstrating the true quantum properties of a mechanical device: squeezed states, superposition states, and entangled states. (1) ``Quantum Measurement Backaction and Cooling Observed with a Nanomechanical Resonator,'' A. Naik, O. Buu, M.D. LaHaye, M.P. Blencowe, A.D. Armour, A.A. Clerk, K.C. Schwab, Nature 443, 193 (2006). (2) ``Self-cooling of a micro-mirror by radiation pressure,'' S. Gigan, H.R. Boehm, M. Patemostro, F. Blaser, G. Langer, J. Hertzberg, K. Schwab, D. Baeuerle, M. Aspelmeyer, A. Zeilinger, Nature 444, 67 (2006).

The joint action on health workforce planning and forecasting: results of a European programme to improve health workforce policies.

NARCIS (Netherlands)

Kroezen, M.; Hoegaerden, M. van; Batenburg, R.

2017-01-01

Health workforce (HWF) planning and forecasting is faced with a number of challenges, most notably a lack of consistent terminology, a lack of data, limited model-, demand-based- and future-based planning, and limited inter-country collaboration. The Joint Action on Health Workforce Planning and

Rhythm Patterns Interaction - Synchronization Behavior for Human-Robot Joint Action

Science.gov (United States)

Mörtl, Alexander; Lorenz, Tamara; Hirche, Sandra

2014-01-01

Interactive behavior among humans is governed by the dynamics of movement synchronization in a variety of repetitive tasks. This requires the interaction partners to perform for example rhythmic limb swinging or even goal-directed arm movements. Inspired by that essential feature of human interaction, we present a novel concept and design methodology to synthesize goal-directed synchronization behavior for robotic agents in repetitive joint action tasks. The agents’ tasks are described by closed movement trajectories and interpreted as limit cycles, for which instantaneous phase variables are derived based on oscillator theory. Events segmenting the trajectories into multiple primitives are introduced as anchoring points for enhanced synchronization modes. Utilizing both continuous phases and discrete events in a unifying view, we design a continuous dynamical process synchronizing the derived modes. Inverse to the derivation of phases, we also address the generation of goal-directed movements from the behavioral dynamics. The developed concept is implemented to an anthropomorphic robot. For evaluation of the concept an experiment is designed and conducted in which the robot performs a prototypical pick-and-place task jointly with human partners. The effectiveness of the designed behavior is successfully evidenced by objective measures of phase and event synchronization. Feedback gathered from the participants of our exploratory study suggests a subjectively pleasant sense of interaction created by the interactive behavior. The results highlight potential applications of the synchronization concept both in motor coordination among robotic agents and in enhanced social interaction between humanoid agents and humans. PMID:24752212

Rating parent-child interactions: joint engagement, communication dynamics, and shared topics in autism, Down syndrome, and typical development.

Science.gov (United States)

Adamson, Lauren B; Bakeman, Roger; Deckner, Deborah F; Nelson, P Brooke

2012-12-01

A battery of 17 rating items were applied to video records of typically-developing toddlers and young children with autism and Down syndrome interacting with their parents during the Communication Play Protocol. This battery provided a reliable and broad view of the joint engagement triad of child, partner, and shared topic. Ratings of the child's joint engagement correlated very strongly with state coding of joint engagement and replicated the finding that coordinated joint engagement was less likely in children with autism. Ratings of other child actions, of parent contributions, and of shared topics and communicative dynamics also documented pervasive variations related to diagnosis, language facility, and communicative context.

The impact of participation in strategic planning and action planning on management control effectiveness: An analysis of independent and joint effects

OpenAIRE

Bedford, David S.; Bednark, Piotr; Dossi, Andrea; Ditillo, Angelo; Gosselin, Maurice; Madsen, Dag Øivind

2016-01-01

This research paper examines the independent and joint effects of participation in strategic planning and action planning. There is extensive research about employee participation in both the fields of strategic planning and budgeting. However, there is a lack of research about the interaction between participation in strategic planning and budgeting. Drawing on the research on participation in decision-making processes, the hypothesis is that strategic planning and action plan...

Success factors for international HTA projects: evaluating EUnetHTA Joint Action as an exemplar.

Science.gov (United States)

Guegan, Eleanor Woodford; Cook, Andrew

2014-11-01

Evaluation is essential for the management of international projects or networks in health technology assessment (HTA). It extends beyond the normal process of project management by incorporating qualitative dimensions and provides information about a project's effectiveness and achievements. This article aimed to identify the factors that are important for the success of international HTA projects. The European network for Health Technology Assessment Joint Action (EUnetHTA JA) is presented as an exemplar. METHODS for the evaluation of international HTA projects include interviews, focus groups, questionnaires, observations and documentary review, and the key points of these approaches have been summarized. The impact and effectiveness of the EUnetHTA JA was evaluated by questionnaires of project participants and external stakeholders, and by documentary review. The response rate for the three annual questionnaires sent to project participants ranged from 86 percent to 88 percent and for external stakeholders ranged from 65 percent to 88 percent. Key factors for project success included production of deliverables according to the workplan, achievement of objectives, added value generated, effective communication, involvement of external stakeholders, workstream management and progress from the preceding EUnetHTA 2006-2008 project. The experience of this project can inform the evaluation of future international HTA collaborations, such as the EUnetHTA 2nd Joint Action and HTAsiaLink. A high response rate was achieved to the self-completion questionnaires and the strategy followed is recommended for evaluation of international HTA projects. Future assessments of international HTA projects should strive to measure outcomes and impact, not just outputs and process.

Information basis for developing comprehensive waste management system. US-Japan joint nuclear energy action plan waste management working group phase I report (Joint research)

International Nuclear Information System (INIS)

Yui, Mikazu; Ishikawa, Hirohisa; Umeki, Hiroyuki; Hioki, Kazumasa; Naito, Morimasa; Makino, Hitoshi; Oda, Chie; Tachi, Yukio; Mitsui, Seiichiro; Shibata, Masahiro; Watanabe, Atsuo; Yoshino, Kyoji; Seo, Toshihiro; Miyamoto, Yoichi; Nutt, Mark; Peters, Mark; Bresee, James; Lesica, Sue; Schwab, Patrick; Gomberg, Steve; Jones, Jay; Halsey, Bill; Marra, John; Vienna, John; Gombert, Drik; McMahon, Kevin; James, Scott; Caporuscio, Florie

2010-05-01

The activity of Phase I of the Waste Management Working Group under the United States - Japan Joint Nuclear Energy Action Plan started in 2007. The US-Japan JNEAP is a bilateral collaborative framework to support the global implementation of safe, secure, and sustainable, nuclear fuel cycles (referred to in this document as fuel cycles). The Waste Management Working Group was established by strong interest of both parties, which arise from the recognition that development and optimization of waste management and disposal system(s) are central issues of the present and future nuclear fuel cycles. This report summarizes the activity of the Waste Management Working Group that focused on consolidation of the existing technical basis between the U.S. and Japan and the joint development of a plan for future collaborative activities. Firstly, the political/regulatory frameworks related to nuclear fuel cycles in both countries were reviewed. The various advanced fuel cycle scenarios that have been considered in both countries were then surveyed and summarized. The working group established the working reference scenario for the future cooperative activity that corresponds to a fuel cycle scenario being considered both in Japan and the U.S. This working scenario involves transitioning from a once-through fuel cycle utilizing light water reactors to a one-pass uranium-plutonium fuel recycle in light water reactors to a combination of light water reactors and fast reactors with plutonium, uranium, and minor actinide recycle, ultimately concluding with multiple recycle passes primarily using fast reactors. Considering the scenario, current and future expected waste streams, treatment and inventory were discussed, and the relevant information was summarized. Second, the waste management/disposal system optimization was discussed. Repository system concepts were reviewed, repository design concepts for the various classifications of nuclear waste were summarized, and the factors

Managing Joint Production Motivation

DEFF Research Database (Denmark)

Lindenberg, Siegwart; Foss, Nicolai Juul

2011-01-01

We contribute to the microfoundations of organizational performance by proffering the construct of joint production motivation. Under such motivational conditions individuals see themselves as part of a joint endeavor, each with his or her own roles and responsibilities; generate shared...... representations of actions and tasks; cognitively coordinate cooperation; and choose their own behaviors in terms of joint goals. Using goal-framing theory, we explain how motivation for joint production can be managed by cognitive/symbolic management and organizational design....

A Group Action Method for Construction of Strong Substitution Box

Science.gov (United States)

Jamal, Sajjad Shaukat; Shah, Tariq; Attaullah, Atta

2017-06-01

In this paper, the method to develop cryptographically strong substitution box is presented which can be used in multimedia security and data hiding techniques. The algorithm of construction depends on the action of a projective general linear group over the set of units of the finite commutative ring. The strength of substitution box and ability to create confusion is assessed with different available analyses. Moreover, the ability of resistance against malicious attacks is also evaluated. The substitution box is examined by bit independent criterion, strict avalanche criterion, nonlinearity test, linear approximation probability test and differential approximation probability test. This substitution box is equated with well-recognized substitution boxes such as AES, Gray, APA, S8, prime of residue, Xyi and Skipjack. The comparison shows encouraging results about the strength of the proposed box. The majority logic criterion is also calculated to analyze the strength and its practical implementation.

Joint Inversion of 1-Hz GPS Data and Strong Motion Records for the Rupture Process of the 2008 Iwate-Miyagi Nairiku Earthquake: Objectively Determining Relative Weighting

Science.gov (United States)

Wang, Z.; Kato, T.; Wang, Y.

2015-12-01

The spatiotemporal fault slip history of the 2008 Iwate-Miyagi Nairiku earthquake, Japan, is obtained by the joint inversion of 1-Hz GPS waveforms and near-field strong motion records. 1-Hz GPS data from GEONET is processed by GAMIT/GLOBK and then a low-pass filter of 0.05 Hz is applied. The ground surface strong motion records from stations of K-NET and Kik-Net are band-pass filtered for the range of 0.05 ~ 0.3 Hz and integrated once to obtain velocity. The joint inversion exploits a broader frequency band for near-field ground motions, which provides excellent constraints for both the detailed slip history and slip distribution. A fully Bayesian inversion method is performed to simultaneously and objectively determine the rupture model, the unknown relative weighting of multiple data sets and the unknown smoothing hyperparameters. The preferred rupture model is stable for different choices of velocity structure model and station distribution, with maximum slip of ~ 8.0 m and seismic moment of 2.9 × 1019 Nm (Mw 6.9). By comparison with the single inversion of strong motion records, the cumulative slip distribution of joint inversion shows sparser slip distribution with two slip asperities. One common slip asperity extends from the hypocenter southeastward to the ground surface of breakage; another slip asperity, which is unique for joint inversion contributed by 1-Hz GPS waveforms, appears in the deep part of fault where very few aftershocks are occurring. The differential moment rate function of joint and single inversions obviously indicates that rich high frequency waves are radiated in the first three seconds but few low frequency waves.

[Temporo-mandibular joint. Morpho-functional considerations].

Science.gov (United States)

Scutariu, M D; Indrei, Anca

2004-01-01

The temporo-mandibular joint is distinguished from most other synovial joints of the body by two features: 1. the two jointed components carry teeth whose position and occlusion introduce a very strong influence on the movements of the temporo-mandibular joint and 2. its articular surfaces are not covered by hyaline cartilage, but by a dense, fibrous tissue. This paper describes the parts of the temporo-mandibular joint: the articular surfaces (the condylar process of the mandible and the glenoid part of the temporal bone), the fibrocartilaginous disc which is interposed between the mandibular and the temporal surface, the fibrous capsule of the temporo-mandibular joint and the ligaments of this joint. All these parts present a very strong adaptation at the important functions of the temporo-mandibular joint.

Interdependence of torque, joint angle, angular velocity and muscle action during human multi-joint leg extension.

Science.gov (United States)

Hahn, Daniel; Herzog, Walter; Schwirtz, Ansgar

2014-08-01

Force and torque production of human muscles depends upon their lengths and contraction velocity. However, these factors are widely assumed to be independent of each other and the few studies that dealt with interactions of torque, angle and angular velocity are based on isolated single-joint movements. Thus, the purpose of this study was to determine force/torque-angle and force/torque-angular velocity properties for multi-joint leg extensions. Human leg extension was investigated (n = 18) on a motor-driven leg press dynamometer while measuring external reaction forces at the feet. Extensor torque in the knee joint was calculated using inverse dynamics. Isometric contractions were performed at eight joint angle configurations of the lower limb corresponding to increments of 10° at the knee from 30 to 100° of knee flexion. Concentric and eccentric contractions were performed over the same range of motion at mean angular velocities of the knee from 30 to 240° s(-1). For contractions of increasing velocity, optimum knee angle shifted from 52 ± 7 to 64 ± 4° knee flexion. Furthermore, the curvature of the concentric force/torque-angular velocity relations varied with joint angles and maximum angular velocities increased from 866 ± 79 to 1,238 ± 132° s(-1) for 90-50° knee flexion. Normalised eccentric forces/torques ranged from 0.85 ± 0.12 to 1.32 ± 0.16 of their isometric reference, only showing significant increases above isometric and an effect of angular velocity for joint angles greater than optimum knee angle. The findings reveal that force/torque production during multi-joint leg extension depends on the combined effects of angle and angular velocity. This finding should be accounted for in modelling and optimisation of human movement.

Joint Intentionality

Directory of Open Access Journals (Sweden)

Koreň Ladislav

2016-03-01

Full Text Available According to the shared intentionality hypothesis proposed by Michael Tomasello, two cognitive upgrades – joint and collective intentionality, respectively – make human thinking unique. Joint intentionality, in particular, is a mindset supposed to account for our early, species-specific capacity to participate in collaborative activities involving two (or a few agents. In order to elucidate such activities and their proximate cognitive-motivational mechanism, Tomasello draws on philosophical accounts of shared intentionality. I argue that his deference to such cognitively demanding accounts of shared intentional activities is problematic if his theoretical ambition is in part to show that and how early (prelinguistic and precultural capacities for joint action contribute to the development of higher cognitive capacities.

Joint action coordination through strategic reduction in variability

DEFF Research Database (Denmark)

Vesper, Cordula; Schmitz, Laura; Sebanz, Natalie

2013-01-01

How do people coordinate actions with others? We tested the hypothesis that pairs of participants strategically reduce the variability of their action performance to achieve synchronicity in the absence of visual feedback about each other’s actions. Consistent with this prediction, participants...... strategic adaptation in the service of real-time action coordination when only minimal perceptual information is available....

<strong>Entrepreneurial Action in Shaping Education for Entrepreneurshipstrong>

DEFF Research Database (Denmark)

Christensen, Poul Rind; Kirketerp Linstad, Anne

entrepreneurship training and education. Neutral assessments of the school have indicated that more than 50 percent of the students graduated from the school has started their own business and furthermore that the students exercise a strong entrepreneurial behaviour (Deichman-Sørensen 1997). Seemingly the school...... also started to pay attention to the apparent success of the KaosPilots. What is the secret of their recipe? In this contribution we want to explore how the KaosPilots form their pedagogical concepts of teaching entrepreneurship and enterprise behaviour....

Experimental semiotics: a new approach for studying communication as a form of joint action.

Science.gov (United States)

Galantucci, Bruno

2009-04-01

In the last few years, researchers have begun to investigate the emergence of novel forms of human communication in the laboratory. I survey this growing line of research, which may be called experimental semiotics, from three distinct angles. First, I situate the new approach in its theoretical and historical context. Second, I review a sample of studies that exemplify experimental semiotics. Third, I present an empirical study that illustrates how the new approach can help us understand the socio-cognitive underpinnings of human communication. The main conclusion of the paper will be that, by reproducing micro samples of historical processes in the laboratory, experimental semiotics offers new powerful tools for investigating human communication as a form of joint action. Copyright © 2009 Cognitive Science Society, Inc.

Bone bruise in magnetic resonance imaging strongly correlates with the production of joint effusion and with knee osteoarthritis

International Nuclear Information System (INIS)

Oda, Hiromi; Igarashi, Mitsuo; Sase, Hiroshi; Sase, Takeshi; Yamamoto, Seizo

2008-01-01

The findings of magnetic resonance imaging (MRI) have not been studied systematically in patients with osteoarthritis (OA). The objective here was to compare MRI findings with radiological findings in patients with knee pain and to identify factors that influence the progression of OA of the knee. Of 212 patients with knee pain and MRI of the knee joint, 161 patients were selected for the study after exclusion of cases of trauma and other arthritides. MRI was used to evaluate the presence and degree of bone bruise, hydrarthrosis, and injuries to the cruciate ligament and meniscus. Bone bruise was classified into four types, and hydrarthrosis into four grades. Radiologically, OA progression in the femorotibial and patellofemoral joints was analyzed according to the Kellgren-Lawrence classification. Age was divided into four groups based on distribution quartiles. Logistic regression analysis and a generalized linear model with Poisson regression were used to analyze correlations among these factors. Bone bruise was present in 87 cases, hydrarthrosis in 100, cruciate ligament injury in 20, and meniscus injury in 98. The presence of bone bruise was not related to age, cruciate ligament injury, meniscus injury, nor to OA of the patellofemoral joint, but was related to hydrarthrosis and to OA of the femorotibial joint. Femorotibial OA was much more strongly associated with bone bruise than with hydrarthrosis. Furthermore, analyzing the relation between the types of bone bruise and the degree of hydrarthrosis using a generalized linear model with Poisson regression, there was a positive correlation between the grade of bone bruise and the amount of hydrarthrosis. A factor associated with the degree of osteoarthritis of the knee is bone bruise observed on MRI. The degree of hydrarthrosis is related to the grade of bone bruise, but is not linked to the degree of osteoarthritis. (author)

Rapid Screening of Active Components with an Osteoclastic Inhibitory Effect in Herba epimedii Using Quantitative Pattern–Activity Relationships Based on Joint-Action Models

Directory of Open Access Journals (Sweden)

Xiao-Yan Yuan

2017-10-01

Full Text Available Screening of bioactive components is important for modernization and quality control of herbal medicines, while the traditional bioassay-guided phytochemical approach is time-consuming and laborious. The presented study proposes a strategy for rapid screening of active components from herbal medicines. As a case study, the quantitative pattern–activity relationship (QPAR between compounds and the osteoclastic inhibitory effect of Herba epimedii, a widely used herbal medicine in China, were investigated based on joint models. For model construction, standard mixtures data showed that the joint-action models are better than the partial least-squares (PLS model. Then, the Good2bad value, which could reflect components’ importance based on Monte Carlo sampling, was coupled with the joint-action models for screening of active components. A compound (baohuoside I and a component composed of compounds with retention times in the 6.9–7.9 min range were selected by our method. Their inhibition rates were higher than icariin, the key bioactive compound in Herba epimedii, which could inhibit osteoclast differentiation and bone resorption in a previous study. Meanwhile, the half-maximal effective concentration, namely, EC50 value of the selected component was 7.54 μg/mL, much smaller than that of baohuoside I—77 μg/mL—which indicated that there is synergistic action between compounds in the selected component. The results clearly show our proposed method is simple and effective in screening the most-bioactive components and compounds, as well as drug-lead components, from herbal medicines.

JOINT FORCE AND CONTEMPORARY MILITARY ACTIONS

Directory of Open Access Journals (Sweden)

Codrin HERTANU

2012-01-01

Full Text Available In the current changing international context, the worldwide power balance along with its inter-dependencies shows that mankind is facing problems and pressures posed by resources limitation (the oil ones being the most relevant dramatic climate evolution and a decisive impact of technologies. The approach of the armed forces to the national defense related interests, as well as to the asymmetrical and irregular threats underlines the joint force’s capacity to be the most powerful and adequate tool to address all of these.

Normative Action Research

DEFF Research Database (Denmark)

Baboroglu, Oguz; Ravn, Ib

1992-01-01

This paper presents an argument for an enrichment of action research methodology. To the current state of action research, we add a constructivist epistemological argument, as well as a crucial inspiration from some futures-oriented planning approaches. Within the domain of social....... They are generated jointly by the stakeholders of a system and the involved action researchers and are tested every time that the prescriptions for action contained in them are followed by a system's stakeholders....

Baryon bags in strong coupling QCD

Science.gov (United States)

Gattringer, Christof

2018-04-01

We discuss lattice QCD with one flavor of staggered fermions and show that in the path integral the baryon contributions can be fully separated from quark and diquark contributions. The baryonic degrees of freedom (d.o.f.) are independent of the gauge field, and the corresponding free fermion action describes the baryons through the joint propagation of three quarks. The nonbaryonic dynamics is described by quark and diquark terms that couple to the gauge field. When evaluating the quark and diquark contributions in the strong coupling limit, the partition function completely factorizes into baryon bags and a complementary domain. Baryon bags are regions in space-time where the dynamics is described by a single free fermion made out of three quarks propagating coherently as a baryon. Outside the baryon bags, the relevant d.o.f. are monomers and dimers for quarks and diquarks. The partition sum is a sum over all baryon bag configurations, and for each bag, a free fermion determinant appears as a weight factor.

Can the identity of a behavior setting be perceived through patterns of joint action? An investigation of place perception.

Science.gov (United States)

Heft, Harry; Hoch, Justine; Edmunds, Trent; Weeks, Jillian

2014-10-13

"Behavior settings" are generated by joint actions of individuals in conjunction with the milieu features (or affordances) that are available. The reported research explores the hypothesis that the identity or meaning of a behavior setting can be perceived by means of the patterns of action collectively generated by the setting's participants. A set of computer animations was created based on detailed observation of activities in everyday settings. Three experiments were conducted to assess whether perceivers could extract "structure from motion" (in this case, collective actions) that was specific to the particular behavior setting displayed by way of the animations. Two experiments assessed whether individuals could accurately perceive the identity of the behavior settings with such displays, and a third experiment indirectly examined this possibility by evaluating whether setting possibilities and constraints were recognized. The results offered some support for the hypothesis, and suggested several refinements in how to conceptualize a typology of behavior settings. An ecological approach to place perception is also discussed.

[Comparative evolution surgical accesses to temporo-mandibular joint].

Science.gov (United States)

Sysoliatin, P G; Novikov, A I; Sysoliatin, S P; Bobylev, N G; Brega, I N

2007-01-01

In experiment on 30 corpses of adult people criteria of an operational wound (depth of a wound, a corner of operational action, an axis of operational action, a corner of an inclination of operational action) were studied at preauricularis, intrauricularis, intrauriculo-temporalis and posterior mandibullaris access to temporo-mandibular joint (TMJ). New surgical intrauriculo-temporalis access to the joint is substantrated. On the basis of the analysis of 289 operations at 268 patients the indications to a choice of surgical access were developed at various diseases and damages of TMJ.

[Experience in organization of joint actions of expert divisions during the accident at P.S. Podporozniy Sayano-Shushenskaya hydroelectric power station].

Science.gov (United States)

Kolkutin, V V; Ivanov, P L; Fetisov, V A; Afanas'ev, S A; Dorozhkin, O A; Vognerubov, R N; Kuznetsov, T L

2010-01-01

The authors illustrate positive experience in organization and coordination of joint actions of expert divisions of different sectors during the accident at P.S. Podporozniy Sayano-Shushenskaya hydroelectric power station in August 2009. Special emphasis is laid on the participation of experts of quick-reaction teams formed by territorial forensic medical bureaus, mobile and supporting forces from the adjacent regions.

Features of Joint Capsule Formation After Antenatal Action of Antigen

Directory of Open Access Journals (Sweden)

A.V. Fedotchenko

2014-10-01

Full Text Available In this paper using morphometric, histological, histochemical and statistical methods, we have investigated the dynamics of hip joint capsule formation in white laboratory rats during the postnatal period after intrefetal introduction of antigen. It is found that antenatal effect of antigen leads to an increase in the number of lymphocytes, in particular PNA+, in joint capsule. Against this background, we observed an increase in the proportion of cells, the basic substance and elastic fibers, while reducing the content of collagen fibers, violations in polysaccharides and fibroblasts distribution that indicates the development of dysplastic processes in the hip joint and can be regarded as the leading factor of coxarthrosis development. Experimentally, we have detected arachnodactylia as a visual clinical manifestation of dysplasia.

Approximation of wave action flux velocity in strongly sheared mean flows

Science.gov (United States)

Banihashemi, Saeideh; Kirby, James T.; Dong, Zhifei

2017-08-01

Spectral wave models based on the wave action equation typically use a theoretical framework based on depth uniform current to account for current effects on waves. In the real world, however, currents often have variations over depth. Several recent studies have made use of a depth-weighted current U˜ due to [Skop, R. A., 1987. Approximate dispersion relation for wave-current interactions. J. Waterway, Port, Coastal, and Ocean Eng. 113, 187-195.] or [Kirby, J. T., Chen, T., 1989. Surface waves on vertically sheared flows: approximate dispersion relations. J. Geophys. Res. 94, 1013-1027.] in order to account for the effect of vertical current shear. Use of the depth-weighted velocity, which is a function of wavenumber (or frequency and direction) has been further simplified in recent applications by only utilizing a weighted current based on the spectral peak wavenumber. These applications do not typically take into account the dependence of U˜ on wave number k, as well as erroneously identifying U˜ as the proper choice for current velocity in the wave action equation. Here, we derive a corrected expression for the current component of the group velocity. We demonstrate its consistency using analytic results for a current with constant vorticity, and numerical results for a measured, strongly-sheared current profile obtained in the Columbia River. The effect of choosing a single value for current velocity based on the peak wave frequency is examined, and we suggest an alternate strategy, involving a Taylor series expansion about the peak frequency, which should significantly extend the range of accuracy of current estimates available to the wave model with minimal additional programming and data transfer.

29 CFR 791.2 - Joint employment.

Science.gov (United States)

2010-07-01

... the Act. In this event, all joint employers are responsible, both individually and jointly, for... they have. Of course, an employer should not be held responsible for an employee's action in seeking... two or more employers at the same time under the Fair Labor Standards Act of 1938, since there is...

Joint intentionality: from thin to thick

Czech Academy of Sciences Publication Activity Database

Koreň, Ladislav

2016-01-01

Roč. 2, č. 1 (2016), s. 75-85 ISSN 2196-9655 R&D Projects: GA ČR GA13-20785S Institutional support: RVO:67985955 Keywords : Tomasello * Cooperation * Joint intentionality * Joint action * Mindreading Subject RIV: AA - Philosophy ; Religion https://www.degruyter.com/view/j/jso.2016.2.issue-1/jso-2015-0047/jso-2015-0047.xml?format=INT

Effects of pulsed mid-IR lasers on bovine knee joint tissues

Science.gov (United States)

Vari, Sandor G.; Shi, Wei-Qiang; Pergadia, Vani R.; Duffy, J. T.; Miller, J. M.; van der Veen, Maurits J.; Weiss, Andrew B.; Fishbein, Michael C.; Grundfest, Warren S.

1993-07-01

We investigated the effect of varying Tm:YAG (2.014 micrometers ) and Ho:YAG (2.130 micrometers ) laser parameters on ablation rate and consequent thermal damage. Mid-infrared wavelengths are strongly absorbed by most biological tissues due to the tissue's high water content. The ablation rate of fresh bovine knee joint tissues (fibrous cartilage, hyaline cartilage, and bone) in saline was assessed as a function of radiant exposure (160 - 950 J/cm2), at pulse widths of 200 microsecond(s) ec for Tm:YAG and 250 microsecond(s) ec for Ho:YAG and a repetition rate of 2 Hz. All tissues used in this study could be efficiently ablated using two micron lasers. The mechanism of action is likely related to the formation and collapse of cavitation bubbles, associated with mid-infrared lasers. We concluded that the Tm:YAG and Ho:YAG lasers are capable of effective knee joint tissue ablation.

“Weak direct” and “Strong indirect” interactions are the mode of action of food factors

Directory of Open Access Journals (Sweden)

Tetsuya Konishi

2014-06-01

Full Text Available Age-dependent and lifestyle related diseases such as metabolic syndromes have become a social problem worldwide. Since these disorders are closely related to dietary lifestyle, the old saying “foods are medicine” is now being re-evaluated. Thus, dietary protection against these diseases is attracting much attention. As research into functional foods advances, a book of knowledge is being accumulated on the active ingredients, termed “food factors”, present in food resources. Identifying such molecules usually follows the conventional methodology used for finding drug candidates from natural resources. The question has arisen as to whether the mode of action of food factors as molecules is the same as that of drugs. In this article, the functional properties of food factors and drugs are comparatively reviewed and the characteristic features of food factor function is discussed, based on the idea of “weak direct” and “strong indirect” actions of food factors to their receptors

Survey to promote an action implemented jointly project; Kyodo jisshi katsudo project suishin chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

In the 1st (1995) conference of the nations which concluded the Framework Convention on Climate Change, decided on was a trial implementation of an action implemented jointly (AIJ) project with developing countries on the voluntary basis. In the Asia region, emission of greenhouse effect gas is remarkably increasing in accordance with rapid development of economy, and it is important to appropriately support through this project both economic development and energy demand in Asia. Taking the circumstance into consideration, the survey was conducted to contribute to activating the AIJ Japan Program. As the AIJ of leading developed countries, recognized were 25 (U.S.), 6 (Holland), 8 (Germany), 2 (Norway) projects. As to the AIJ in Southeast Asia, China and India, Indonesia is actively participating in the project, but others less actively. Concerning the project needs in every country, heightening of power plant efficiency, enhancement of efficiency in the transportation sector, new energy utilization, recovery of methane gas, etc. acquire a priority. 21 figs., 31 tabs.

Interpersonal strategies for disturbance attenuation during a rhythmic joint motor action.

Science.gov (United States)

Melendez-Calderon, A; Komisar, V; Burdet, E

2015-08-01

Helping someone carry a table is fairly easy; however, our understanding of such joint motor actions is still poorly understood. We studied how pairs of human subjects (referred to as dyads) collaborate physically to attenuate external mechanical perturbations during a target tracking task. Subjects tracked a target moving in a slow and predictable way using wrist flexion/extension movements, with and without destabilizing torque perturbations. Dyad strategies were classified using interaction torques and muscular activity. During unperturbed interactions (baseline), the dyads tended to stabilize on a particular strategy. The baseline strategy was not the same in all dyads, suggesting that the solution to the task was not global but specific to each particular dyad. After several trials of unperturbed interactions, we introduced mechanical vibrations and analyzed the adaptation process. Dyads showed a tendency to counteract the external disturbances by first increasing co-contraction within each subject (independent co-contraction), and then raising the amount of opposing interaction torques (dyadic co-contraction) with increased perturbation amplitude. The introduction of perturbations impelled dyads to abandon their unperturbed baseline strategy and adopt a more common strategy across dyads, suggesting attractor solutions. Our results establish a framework for future human-human interaction studies, and have implications in human motor control as well as human-robot and robot-robot interactions. Copyright © 2015. Published by Elsevier Inc.

Benefits of joint audits of service company and operator personnel

International Nuclear Information System (INIS)

Ritchie, R.D.

1991-01-01

Companies operating in the petroleum industry are showing an increasing collective awareness of safety and environmental issues. The objective of management in any organization is to identify potential hazards and develop and implement an action plant to eliminate these hazards. Joint audits between operating companies and service companies have proved an effective means of developing an objective and realistic safety awareness program. Joint audits, unlike external audits, enable both companies to develop, implement and monitor a meaningful safety policy based on factual information. The paper describes the planning, execution and follow up of an in-depth joint audit. Analysis of the audit results generated action plans to correct areas in need of improvement for both the operating and service companies. Of these areas, most could be corrected and resolved within three months while the remainder were targeted for remedial action to be completed within one year. The paper provides a thorough set of guidelines for all stages of a successful joint audit and illustrates, with examples, the operational improvements to be gained from such operator/service-company cooperation

Formation of Exfoliation Joints

Science.gov (United States)

Martel, S. J.

2004-12-01

The Earth's internal stresses interact with the topographic surface to affect many phenomena. Exfoliation joints, or sheeting joints, are widespread manifestations of this interaction. These opening-mode fractures form subparallel to the Earth's surface, bounding roughly concentric slabs of rock that resemble the layers of an onion. They occur worldwide in all major bedrock types, attain in-plane dimensions of hundreds of meters, exert a strong influence on groundwater flow, and help produce spectacular scenery, as in Yosemite National Park. The mechanism that causes them has been enigmatic. They are widely regarded as forming in response to "removal of overburden", but large fractures do not open in rocks merely by relieving a compressive stress. High fluid pressures, thermal effects, rock heterogeneity, and weathering also are rejected as primary causes of these fractures. Tensile stresses normal to the surface are required for large exfoliation fractures to open. Intriguingly, high surface-parallel compressive stresses are widely documented where exfoliation joints occur. Both numerical and analytical solutions for two-dimensional elastic bodies show that localized tensile stresses perpendicular to the ground surface must develop beneath certain topographies subject to strong compressive stresses parallel to the surface. This highly non-intuitive effect reflects the profound influence that topography can have on stresses near the surface of the Earth, and it can explain how exfoliation joints open. The theoretical results also indicate that exfoliation joint distributions could be used to infer the horizontal stresses near the Earth's surface.

Tracking in Object Action Space

DEFF Research Database (Denmark)

Krüger, Volker; Herzog, Dennis

2013-01-01

the space of the object affordances, i.e., the space of possible actions that are applied on a given object. This way, 3D body tracking reduces to action tracking in the object (and context) primed parameter space of the object affordances. This reduces the high-dimensional joint-space to a low...

Nurses in action: An introduction to action research in nursing

Directory of Open Access Journals (Sweden)

E. C. McKibbin

1996-03-01

Full Text Available Action Research is one of the new generation of qualitative research methods in the social sciences which has special significance for nurses in South Africa. The collaborative, participative and reflective qualities of Action Research appeal to practitioners, and lend themselves to joint problem solving activities in local contexts. This paper sets out a rationale for Action Research, then describes its features, strengths, and limitations. Ways of overcoming the latter are suggested. The paper concludes that Action Research has potential application in the field of nursing, not only for the purposes of practical problem solving, but also for improving the personal and professional practice of nurses, and for emancipating nurses from their subordinate position in the hierarchy of health science.

The joint action of destruxins and botanical insecticides (rotenone, azadirachtin and paeonolum) against the cotton aphid, Aphis gossypii Glover.

Science.gov (United States)

Yi, Fei; Zou, Chunhua; Hu, Qiongbo; Hu, Meiying

2012-06-18

The joint action of destruxins and three botanical insecticides, rotenone (Rot), azadirachtin (Aza) and paeonolum (Pae) against the cotton aphid, Aphis gossypii, was bioassayed. In laboratory experiment, several synergistic groups of destruxins with botanical insecticides were found by means of Sun's Co-toxicity Coefficients (CTC) and Finney's Synergistic Coefficient (SC). The best synergistic effect was discovered in the ratio group Des/Rot 1/9 with the CTC or SC and LC₅₀ values of 479.93 or 4.8 and 0.06 μg/mL, respectively. The second and third synergistic effects were recorded in the ratio groups Des/Rot 7/3 and 9/1. Although the ratio groups Des/Aza 6/4, Des/Pae 4/6, 3/7 and 2/8 indicated synergism by Sun's CTC, they were determined as additive actions by Finney's SC. Additive actions were also found in most of the ratio groups, but antagonism were recorded only in three ratio groups: Des/Pae 9/1, 7/3 and 6/4. In greenhouse tests, the highest mortality was 98.9% with the treatment Des/Rot 1/9 at 0.60 μg/mL, meanwhile, the treatments Des/Pae 4/6 and Des/Aza 6/4 had approximately 88% mortality.

Joint sciences academies statement: global response to climate change; Declaration commune des Academies des sciences sur la reponse globale au changement climatique

Energy Technology Data Exchange (ETDEWEB)

NONE

2005-06-01

Taking into account that there is now strong evidence that significant global warming is occurring, the Joint Science Academies, urge, by this statement, all nations in the line with the UNFCCC principles, to take prompt action to reduce the causes of climate change, adapt to its impacts and ensure that the issue is included in all relevant national and international strategies. Some recommendations are also given. (A.L.B.)

Structure and properties of fixed joints formed by ultrasonic-assisted friction-stir welding

Energy Technology Data Exchange (ETDEWEB)

Fortuna, S. V., E-mail: s-fortuna@ispms.ru; Ivanov, K. V., E-mail: ikv@ispms.ru; Eliseev, A. A., E-mail: alan@ispms.ru [Institute of Strength Physics and Materials ScienceTomsk, 634055 (Russian Federation); Tarasov, S. Yu., E-mail: tsy@ispms.ru; Ivanov, A. N., E-mail: ivan@ispms.ru; Rubtsov, V. E., E-mail: rvy@ispms.ru; Kolubaev, E. A., E-mail: eak@ispms.ru [Institute of Strength Physics and Materials ScienceTomsk, 634055 (Russian Federation); National Research Tomsk Polytechnic University, Tomsk, 634050 (Russian Federation)

2015-10-27

This paper deals with structure and properties of aluminum alloy 7475 and its joints obtained by friction stir welding including under ultrasonic action. Microhardness measurements show that ultrasonic action increases strength properties of the joints. Optical and transmission electron microscopy reveals that this effect is related to the precipitation of tertiary coherent S-and T-phase particles.

Water flow in single rock joints

International Nuclear Information System (INIS)

Hakami, Eva

1989-05-01

To study the hydromechanical properties of single rock joints a technique to make transparent replicas of natural joint surfaces has been developed. Five different joint samples were replicated and studied. The aperture distribution of the joints were obtained through a measurement method provided by the transparent replicas. The principle behind the method is that a water drop with a known volume, which is placed inside a joint, will cover a certain area of the surface depending on the average size of aperture at the actual point. Flow tests were performed on the same joint replicas. The tortuousity of the flow and the velocity along single stream lines were measured using colour injections into the water flow through the joints. The equivalent hydraulic apertures determined from the flow tests where shown to be smaller than the average mechanical apertures. The velocity of the flow varies strongly between different paths over the joint depending on the spatial distribution of the apertures. The degree of matedness between the joint surfaces is an important factor influencing the channeling character of the joints. (author) (38 refs.)

PATHOLOGY OF TEMPOROMANDIBULAR-JOINT INTERNAL DERANGEMENT AND OSTEOARTHROSIS

NARCIS (Netherlands)

DEBONT, LGM; STEGENGA, B

Temporomandibular joint (TMJ) osteoarthrosis and disk displacement seem to be strongly related, but they may also represent mutually independent temporomandibular disorders. This paper presents relevant aspects of normal physiology and degeneration of synovial joints, aspects of normal

75 FR 33613 - Notice of the Carbon Sequestration-Geothermal Energy-Science Joint Workshop

Science.gov (United States)

2010-06-14

... Energy, DOE. ACTION: Notice of the Carbon Sequestration--Geothermal Energy--Science Joint Workshop... Fossil Energy-Carbon Sequestration Program will be holding a joint workshop on Common Research Themes for...-- http://www.geothermal.energy.gov . DATES: The Carbon Sequestration--Geothermal Energy--Science Joint...

Recognizing human actions by learning and matching shape-motion prototype trees.

Science.gov (United States)

Jiang, Zhuolin; Lin, Zhe; Davis, Larry S

2012-03-01

A shape-motion prototype-based approach is introduced for action recognition. The approach represents an action as a sequence of prototypes for efficient and flexible action matching in long video sequences. During training, an action prototype tree is learned in a joint shape and motion space via hierarchical K-means clustering and each training sequence is represented as a labeled prototype sequence; then a look-up table of prototype-to-prototype distances is generated. During testing, based on a joint probability model of the actor location and action prototype, the actor is tracked while a frame-to-prototype correspondence is established by maximizing the joint probability, which is efficiently performed by searching the learned prototype tree; then actions are recognized using dynamic prototype sequence matching. Distance measures used for sequence matching are rapidly obtained by look-up table indexing, which is an order of magnitude faster than brute-force computation of frame-to-frame distances. Our approach enables robust action matching in challenging situations (such as moving cameras, dynamic backgrounds) and allows automatic alignment of action sequences. Experimental results demonstrate that our approach achieves recognition rates of 92.86 percent on a large gesture data set (with dynamic backgrounds), 100 percent on the Weizmann action data set, 95.77 percent on the KTH action data set, 88 percent on the UCF sports data set, and 87.27 percent on the CMU action data set.

An fMRI study of joint action – varying levels of cooperation correlates with activity in sensorimotor control, but not mentalization, networks

Directory of Open Access Journals (Sweden)

Thierry eChaminade

2012-06-01

Full Text Available As social agents, humans continuously interact with with the people around them. Here, motor cooperation was investigated by designing a situation in which pairs of participants, one being scanned with fMRI, controlled jointly a visually presented object with joystick movements. The object oscillated dynamically along two dimensions, shades of pink and width of gratings, corresponding to the two cardinal directions of joystick movements. While the overall control of each participant on the object was kept constant, the amount of cooperation along the two dimensions varied along four levels, from no (each participant controlled exclusively one dimension to full (each participant controlled half of each dimension cooperation. Increasing cooperation correlated with BOLD signal in the left parietal operculum and anterior cingulate cortex, while decreasing cooperation correlated with activity in the right inferior frontal and superior temporal gyri, in the intraparietal sulci and inferior temporal gyrii bilaterally, and in the dorsomedial prefrontal cortex. As joint control improved with the level of cooperation, we assessed the brain responses correlating with joint performance, and found that activity in most of the areas associated with levels of cooperation also correlated with the joint performance. The only brain area found exclusively in the negative correlation with cooperation was within the posterior region of the rostral medial frontal cortex, involved in the monitoring of action outcome. We therefore propose that this region responds to the predictability of visual feedback given the motor commands, which is maximal when participants do not cooperate as they fully control one dimension. Our results therefore indicate that, in the current experimental paradigm, the level of cooperation affects sensorimotor processing, but not mentalizing. Altogether, humans do not need to have access to others’ intentional states to cooperate on a joint

Process for forming unusually strong joints between metals and ceramics by brazing at temperatures that do no exceed 750 degree C.

Science.gov (United States)

Hammond, Joseph P.; David, Stan A.; Woodhouse, John J.

1986-01-01

This invention is a process for joining metals to ceramics to form very strong bonds using low brazing temperature, i.e., less than 750.degree. C., and particularly for joining nodular cast iron to partially stabilized zirconia. The process provides that the ceramic be coated with an active metal, such as titanium, that can form an intermetallic with a low melting point brazing alloy such as 60Ag-30Cu-10Sn. The nodular cast iron is coated with a noncarbon containing metal, such as copper, to prevent carbon in the nodular cast iron from dissolving in the brazing alloy. These coated surfaces can be brazed together with the brazing alloy between at less than 750.degree. C. to form a very strong joint. An even stronger bond can be formed if a transition piece is used between the metal and ceramic. It is preferred for the transition piece to have a coefficient of thermal compatible with the coefficient of thermal expansion of the ceramic, such as titanium.

Statistical learning in social action contexts.

Science.gov (United States)

Monroy, Claire; Meyer, Marlene; Gerson, Sarah; Hunnius, Sabine

2017-01-01

Sensitivity to the regularities and structure contained within sequential, goal-directed actions is an important building block for generating expectations about the actions we observe. Until now, research on statistical learning for actions has solely focused on individual action sequences, but many actions in daily life involve multiple actors in various interaction contexts. The current study is the first to investigate the role of statistical learning in tracking regularities between actions performed by different actors, and whether the social context characterizing their interaction influences learning. That is, are observers more likely to track regularities across actors if they are perceived as acting jointly as opposed to in parallel? We tested adults and toddlers to explore whether social context guides statistical learning and-if so-whether it does so from early in development. In a between-subjects eye-tracking experiment, participants were primed with a social context cue between two actors who either shared a goal of playing together ('Joint' condition) or stated the intention to act alone ('Parallel' condition). In subsequent videos, the actors performed sequential actions in which, for certain action pairs, the first actor's action reliably predicted the second actor's action. We analyzed predictive eye movements to upcoming actions as a measure of learning, and found that both adults and toddlers learned the statistical regularities across actors when their actions caused an effect. Further, adults with high statistical learning performance were sensitive to social context: those who observed actors with a shared goal were more likely to correctly predict upcoming actions. In contrast, there was no effect of social context in the toddler group, regardless of learning performance. These findings shed light on how adults and toddlers perceive statistical regularities across actors depending on the nature of the observed social situation and the

Knee joint mobilization reduces secondary mechanical hyperalgesia induced by capsaicin injection into the ankle joint.

Science.gov (United States)

Sluka, K A; Wright, A

2001-01-01

Joint mobilization is a treatment approach commonly used by physical therapists for the management of a variety of painful conditions. However, the clinical effectiveness when compared to placebo and the neurophysiological mechanism of action are not known. The purpose of this study was to establish that application of a manual therapy technique will produce antihyperalgesia in an animal model of joint inflammation and that the antihyperalgesia produced by joint mobilization depends on the time of treatment application. Capsaicin (0.2%, 50 microl) was injected into the lateral aspect of the left ankle joint and mechanical withdrawal threshold assessed before and after capsaicin injection in Sprague-Dawley rats. Joint mobilization of the ipsilateral knee joint was performed 2 h after capsaicin injection for a total of 3 min, 9 min or 15 min under halothane anaesthesia. Control groups included animals that received halothane for the same time as the group that received joint mobilization and those whose limbs were held for the same duration as the mobilization (no halothane). Capsaicin resulted in a decreased mechanical withdrawal threshold by 2 h after injection that was maintained through 4 h. Both 9 and 15 min of mobilization, but not 3 min of mobilization, increased the withdrawal threshold to mechanical stimuli to baseline values when compared with control groups. The antihyperalgesic effect of joint mobilization lasted 30 min. Thus, joint mobilization (9 or 15 min duration) produces a significant reversal of secondary mechanical hyperalgesia induced by intra-articular injection of capsaicin. Copyright 2001 European Federation of Chapters of the International Association for the Study of Pain.

Pain sensation in human osteoarthritic knee joints is strongly enhanced by diabetes mellitus.

Science.gov (United States)

Eitner, Annett; Pester, Julia; Vogel, Franziska; Marintschev, Ivan; Lehmann, Thomas; Hofmann, Gunther O; Schaible, Hans-Georg

2017-09-01

The major burden of knee joint osteoarthritis (OA) is pain. Since in elder patients diabetes mellitus is an important comorbidity of OA, we explored whether the presence of diabetes mellitus has a significant influence on pain intensity at the end stage of knee OA, and we aimed to identify factors possibly related to changes of pain intensity in diabetic patients. In 23 diabetic and 47 nondiabetic patients with OA undergoing total knee arthroplasty, we assessed the pain intensity before the operation using the "Knee Injury and Osteoarthritis Outcome Score". Furthermore, synovial tissue, synovial fluid (SF), cartilage, and blood were obtained. We determined the synovitis score, the concentrations of prostaglandin E2 and interleukin-6 (IL-6) in the SF and serum, and of C-reactive protein and HbA1c and other metabolic parameters in the serum. We performed multivariate regression analyses to study the association of pain with several parameters. Diabetic patients had on average a higher Knee Injury and Osteoarthritis Outcome Score pain score than nondiabetic patients (P Knee joints from diabetic patients exhibited on average higher synovitis scores (P = 0.024) and higher concentrations of IL-6 in the SF (P = 0.003) than knee joints from nondiabetic patients. Multivariate regression analysis showed that patients with higher synovitis scores had more intense pain independent of all investigated confounders, and that the positive association between pain intensities and IL-6 levels was dependent on diabetes mellitus and/or synovitis. These data suggest that diabetes mellitus significantly increases pain intensity of knee OA, and that in diabetic patients higher pain intensities were determined by stronger synovitis.

Lovelock action with nonsmooth boundaries

Science.gov (United States)

Cano, Pablo A.

2018-05-01

We examine the variational problem in Lovelock gravity when the boundary contains timelike and spacelike segments nonsmoothly glued. We show that two kinds of contributions have to be added to the action. The first one is associated with the presence of a boundary in every segment and it depends on intrinsic and extrinsic curvatures. We can think of this contribution as adding a total derivative to the usual surface term of Lovelock gravity. The second one appears in every joint between two segments and it involves the integral along the joint of the Jacobson-Myers entropy density weighted by the Lorentz boost parameter, which relates the orthonormal frames in each segment. We argue that this term can be straightforwardly extended to the case of joints involving null boundaries. As an application, we compute the contribution of these terms to the complexity of global anti-de Sitter space in Lovelock gravity by using the "complexity =action " proposal and we identify possible universal terms for arbitrary values of the Lovelock couplings. We find that they depend on the charge a* controlling the holographic entanglement entropy and on a new constant that we characterize.

Interdisciplinarity in Vocational Guidance: An Action Theory Perspective

Science.gov (United States)

Valach, Ladislav; Young, Richard A.

2009-01-01

In addressing the issue of interdisciplinary research in vocational guidance, twelve propositions important for understanding the vocational guidance process as joint, goal-directed action are presented. They address the encounter between client and counsellor leading to relational ethics, the relevance of everyday action theory and methods for…

Strong Coupling Holography

CERN Document Server

Dvali, Gia

2009-01-01

We show that whenever a 4-dimensional theory with N particle species emerges as a consistent low energy description of a 3-brane embedded in an asymptotically-flat (4+d)-dimensional space, the holographic scale of high-dimensional gravity sets the strong coupling scale of the 4D theory. This connection persists in the limit in which gravity can be consistently decoupled. We demonstrate this effect for orbifold planes, as well as for the solitonic branes and string theoretic D-branes. In all cases the emergence of a 4D strong coupling scale from bulk holography is a persistent phenomenon. The effect turns out to be insensitive even to such extreme deformations of the brane action that seemingly shield 4D theory from the bulk gravity effects. A well understood example of such deformation is given by large 4D Einstein term in the 3-brane action, which is known to suppress the strength of 5D gravity at short distances and change the 5D Newton's law into the four-dimensional one. Nevertheless, we observe that the ...

10 CFR 1021.216 - Procurement, financial assistance, and joint ventures.

Science.gov (United States)

2010-01-01

... competitive solicitations, unless the action is categorically excluded from preparation of an EA or EIS under...-source joint ventures, unless the action is categorically excluded from preparation of an EA or EIS under... reasoned decision. (g) The environmental critique will focus on environmental issues that are pertinent to...

Mirror neuron system as the joint from action to language.

Science.gov (United States)

Chen, Wei; Yuan, Ti-Fei

2008-08-01

Mirror neuron system (MNS) represents one of the most important discoveries of cognitive neuroscience in the past decade, and it has been found to involve in multiple aspects of brain functions including action understanding, imitation, language understanding, empathy, action prediction and speech evolution. This manuscript reviewed the function of MNS in action understanding as well as language evolution, and specifically assessed its roles as the bridge from body language to fluent speeches. Then we discussed the speech defects of autism patients due to the disruption of MNS. Finally, given that MNS is plastic in adult brain, we proposed MNS targeted therapy provides an efficient rehabilitation approach for brain damages conditions as well as autism patients.

R&D returns, market structure and research joint ventures

DEFF Research Database (Denmark)

Amir, Rabah

2000-01-01

(one firm endogenously exiting). Two research joint venture schemes and the noncooperative solution are compared. Due to built-in symmetry, a joint lab does not always lead to the best performance. Overall, our findings differ quite substantially from those based on strongly decreasing R&D returns...

How to re-establish Openness as default? Towards a global joint initiative

NARCIS (Netherlands)

Stracke, Christian M.

2017-01-01

Stracke, C. M. (2016, 14 April). How to re-establish Openness as default? Towards a global joint initiative. Results from the Action Lab at the Open Education Global Conference 2016, Krakow, Poland. More about the Action Lab:

Application of ultraperformance liquid chromatography/mass spectrometry-based metabonomic techniques to analyze the joint toxic action of long-term low-level exposure to a mixture of organophosphate pesticides on rat urine profile.

Science.gov (United States)

Du, Longfei; Wang, Hong; Xu, Wei; Zeng, Yan; Hou, Yurong; Zhang, Yuqiu; Zhao, Xiujuan; Sun, Changhao

2013-07-01

In previously published articles, we evaluated the toxicity of four organophosphate (OP) pesticides (dichlorvos, dimethoate, acephate, and phorate) to rats using metabonomic technology at their corresponding no observed adverse effect level (NOAEL). Results show that a single pesticide elicits no toxic response. This study aimed to determine whether chronic exposure to a mixture of the above four pesticides (at their corresponding NOAEL) can lead to joint toxic action in rats using the same technology. Pesticides were administered daily to rats through drinking water for 24 weeks. The above mixture of the four pesticides showed joint toxic action at the NOAEL of each pesticide. The metabonomic profiles of rats urine were analyzed by ultraperformance liquid chromatography/mass spectrometry. The 16 metabolites statistically significantly changed in all treated groups compared with the control group. Dimethylphosphate and dimethyldithiophosphate exclusively detected in all treated groups can be used as early, sensitive biomarkers for exposure to a mixture of the OP pesticides. Moreover, exposure to the OP pesticides resulted in increased 7-methylguanine, ribothymidine, cholic acid, 4-pyridoxic acid, kynurenine, and indoxyl sulfate levels, as well as decreased hippuric acid, creatinine, uric acid, gentisic acid, C18-dihydrosphingosine, phytosphingosine, suberic acid, and citric acid. The results indicated that a mixture of OP pesticides induced DNA damage and oxidative stress, disturbed the metabolism of lipids, and interfered with the tricarboxylic acid cycle. Ensuring food safety requires not only the toxicology test data of each pesticide for the calculation of the acceptable daily intake but also the joint toxic action.

Investing in commitment: Persistence in a joint action is enhanced by the perception of a partner's effort.

Science.gov (United States)

Székely, Marcell; Michael, John

2018-05-01

Can the perception that one's partner is investing effort generate a sense of commitment to a joint action? To test this, we developed a 2-player version of the classic snake game which became increasingly boring over the course of each round. This enabled us to operationalize commitment in terms of how long participants persisted before pressing a 'finish' button to conclude each round. Our results from three experiments reveal that participants persisted longer when they perceived what they believed to be cues of their partner's effortful contribution (Experiment 1). Crucially, this effect was not observed when they knew their partner to be an algorithm (Experiment 2), nor when it was their own effort that had been invested (Experiment 3). These results support the hypothesis that the perception of a partner's effort elicits a sense of commitment, leading to increased persistence in the face of a temptation to disengage. Copyright © 2018 Elsevier B.V. All rights reserved.

Phase transition from strong-coupling expansion

International Nuclear Information System (INIS)

Polonyi, J.; Szlachanyi, K.

1982-01-01

Starting with quarkless SU(2) lattice gauge theory and using the strong-coupling expansion we calculate the action of the effective field theory which corresponds to the thermal Wilson loop. This effective action makes evident that the quark liberating phase transition traces back to the spontaneous breaking of a global Z(2) symmetry group. It furthermore describes both phases qualitatively. (orig.)

Collaborative models for the joint production of core health technology assessments: negative and positive aspects for the joint work of different European agencies.

Science.gov (United States)

Lo Scalzo, Alessandra; Vicari, Nicola; Corio, Mirella; Perrini, Maria Rosaria; Jefferson, Tom; Gillespie, Francesca; Cerbo, Marina

2014-11-01

The purpose of the European network for Health Technology Assessment (EUnetHTA) is to make HTA agencies collaborate sharing methods and tools thus avoiding duplication of evaluative efforts and allowing resource savings. From 2010 to 2012, the activities of the network were carried out through EUnetHTA Joint Action 1 and Work Package 4 Strand B aimed at producing two Core HTAs with two main objectives: to test the Web based Core model and the collaborative working models. Our objective in this article is to give an historical record of the Work Package activities highlighting what worked and what did not in the collaboration of researchers' groups coming from different agencies. A retrospective description of all the steps for the joint production of the two Core HTAs is provided starting from the first step of selecting technologies of common interest. Primary researchers' views on the whole process have been collected through a semi-structured telephonic interview supported by a questionnaire. Coordinators views were gathered during internal meetings and validated. Majority of respondents thought topic selection procedure was not clear and well managed. About collaborative models, small groups were seen to enable more exchange, whatever the model. According to coordinators, loss of expertise and experience during the production process, different languages, and novelty of the Online Tool were main barriers. Lessons learned from this first experience in Joint Action 1 paved the path for the collaboration in Joint Action 2, as it allowed enhancements and changes in models of collaborations and coordination.

A Conceptual Review on Action-Perception Coupling in the Musicians’ Brain: What Is It Good for?

Directory of Open Access Journals (Sweden)

Giacomo eNovembre

2014-08-01

Full Text Available Experience with a sensorimotor task, such as practicing a piano piece, leads to strong coupling of sensory (visual or auditory and motor cortices. Here we review behavioural and neurophysiological (M/EEG, TMS and fMRI research exploring this topic using the brain of musicians as a model system. Our review focuses on a recent body of evidence suggesting that this form of coupling might have (at least two cognitive functions. First, it leads to the generation of equivalent predictions (concerning both when and what event is more likely to occur during both perception and production of music. Second, it underpins the common coding of perception and action that supports the integration of the motor output of multiple musicians’ in the context of joint musical tasks. Essentially, training-based coupling of perception and action might scaffold the human ability to represent complex (structured actions and to entrain multiple agents – via reciprocal prediction and adaptation – in the pursuit of shared goals.

A conceptual review on action-perception coupling in the musicians’ brain: what is it good for?

Science.gov (United States)

Novembre, Giacomo; Keller, Peter E.

2014-01-01

Experience with a sensorimotor task, such as practicing a piano piece, leads to strong coupling of sensory (visual or auditory) and motor cortices. Here we review behavioral and neurophysiological (M/EEG, TMS and fMRI) research exploring this topic using the brain of musicians as a model system. Our review focuses on a recent body of evidence suggesting that this form of coupling might have (at least) two cognitive functions. First, it leads to the generation of equivalent predictions (concerning both when and what event is more likely to occur) during both perception and production of music. Second, it underpins the common coding of perception and action that supports the integration of the motor output of multiple musicians’ in the context of joint musical tasks. Essentially, training-based coupling of perception and action might scaffold the human ability to represent complex (structured) actions and to entrain multiple agents—via reciprocal prediction and adaptation—in the pursuit of shared goals. PMID:25191246

Handbook on dynamics of jointed structures.

Energy Technology Data Exchange (ETDEWEB)

Ames, Nicoli M.; Lauffer, James P.; Jew, Michael D.; Segalman, Daniel Joseph; Gregory, Danny Lynn; Starr, Michael James; Resor, Brian Ray

2009-07-01

The problem of understanding and modeling the complicated physics underlying the action and response of the interfaces in typical structures under dynamic loading conditions has occupied researchers for many decades. This handbook presents an integrated approach to the goal of dynamic modeling of typical jointed structures, beginning with a mathematical assessment of experimental or simulation data, development of constitutive models to account for load histories to deformation, establishment of kinematic models coupling to the continuum models, and application of finite element analysis leading to dynamic structural simulation. In addition, formulations are discussed to mitigate the very short simulation time steps that appear to be required in numerical simulation for problems such as this. This handbook satisfies the commitment to DOE that Sandia will develop the technical content and write a Joints Handbook. The content will include: (1) Methods for characterizing the nonlinear stiffness and energy dissipation for typical joints used in mechanical systems and components. (2) The methodology will include practical guidance on experiments, and reduced order models that can be used to characterize joint behavior. (3) Examples for typical bolted and screw joints will be provided.

Use of expansion joints in power stations

International Nuclear Information System (INIS)

Birker; Rommerswinkel.

1976-01-01

The paper discusses the mode of action of different systems of expansion joints. Special regard is given to the problems of expansion of pipelines of high rated diameter as employed in today's large power plant turbines. Due to the limited space available, the important role of the spring rate of the bellows for the reaction forces and moments acting on the connection points is pointed out. Apart from this details are given on the fabrication and materials selection of expansion joint bellows, and problems are discussed which arise in connection with the mechanical or hydraulic deformation of bellows with one or more walls. The non-destructive methods now in use for the testing of expansion pipe joints are mentioned along with experiments to test their behaviour under changing loads. The paper concludes on some remarks concerning proper transport, storage and installation of expansion pipe joints. (orig./AK) [de

The Joint Action of Destruxins and Botanical Insecticides (Rotenone, Azadirachtin and Paeonolum Against the Cotton Aphid, Aphis gossypii Glover

Directory of Open Access Journals (Sweden)

Meiying Hu

2012-06-01

Full Text Available The joint action of destruxins and three botanical insecticides, rotenone (Rot, azadirachtin (Aza and paeonolum (Pae against the cotton aphid, Aphis gossypii, was bioassayed. In laboratory experiment, several synergistic groups of destruxins with botanical insecticides were found by means of Sun’s Co-toxicity Coefficients (CTC and Finney’s Synergistic Coefficient (SC. The best synergistic effect was discovered in the ratio group Des/Rot 1/9 with the CTC or SC and LC₅₀ values of 479.93 or 4.8 and 0.06 μg/mL, respectively. The second and third synergistic effects were recorded in the ratio groups Des/Rot 7/3 and 9/1. Although the ratio groups Des/Aza 6/4, Des/Pae 4/6, 3/7 and 2/8 indicated synergism by Sun’s CTC, they were determined as additive actions by Finney’s SC. Additive actions were also found in most of the ratio groups, but antagonism were recorded only in three ratio groups: Des/Pae 9/1, 7/3 and 6/4. In greenhouse tests, the highest mortality was 98.9% with the treatment Des/Rot 1/9 at 0.60 μg/mL, meanwhile, the treatments Des/Pae 4/6 and Des/Aza 6/4 had approximately 88% mortality.

Socially extended intentions-in-action

DEFF Research Database (Denmark)

Blomberg, Olle

2011-01-01

According to a widely accepted constraint on the content of intentions, here called the exclusivity constraint, one cannot intend to perform another agent’s action, even if one might be able to intend that she performs it. For example, while one can intend that one’s guest leaves before midnight......, one cannot intend to perform her act of leaving. However, Deborah Tollefsen’s (2005) account of joint activity requires participants to have intentions-in-action (in John Searle’s (1983) sense) that violate this constraint. I argue that the exclusivity constraint should not be accepted...... as an unconditional constraint on the contents of intentions-in-action: one may intend to perform a basic action that belongs both to oneself and to another agent. Based on the phenomenology of tool use, I first argue that intentions-in-action of one’s basic actions may be technologically extended, meaning...

Human Activity Recognition in Real-Times Environments using Skeleton Joints

Directory of Open Access Journals (Sweden)

Ajay Kumar

2016-06-01

Full Text Available In this research work, we proposed a most effective noble approach for Human activity recognition in real-time environments. We recognize several distinct dynamic human activity actions using kinect. A 3D skeleton data is processed from real-time video gesture to sequence of frames and getter skeleton joints (Energy Joints, orientation, rotations of joint angles from selected setof frames. We are using joint angle and orientations, rotations information from Kinect therefore less computation required. However, after extracting the set of frames we implemented several classification techniques Principal Component Analysis (PCA with several distance based classifiers and Artificial Neural Network (ANN respectively with some variants for classify our all different gesture models. However, we conclude that use very less number of frame (10-15% for train our system efficiently from the entire set of gesture frames. Moreover, after successfully completion of our classification methods we clinch an excellent overall accuracy 94%, 96% and 98% respectively. We finally observe that our proposed system is more useful than comparing to other existing system, therefore our model is best suitable for real-time application such as in video games for player action/gesture recognition.

Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

International Nuclear Information System (INIS)

Parisi, Maria A.; Cordie, Cinzia; Piazza, Maurizio

2008-01-01

The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented

Seismic Strengthening of Carpentry Joints in Traditional Timber Structures

Science.gov (United States)

Parisi, Maria A.; Cordié, Cinzia; Piazza, Maurizio

2008-07-01

The static and dynamic behavior of timber structures largely depends on their connections. In traditional timber construction, elements are usually connected with carpentry joints based on contact pressure and friction, often with only minor reinforcement generically intended to avoid disassembling. In current practice, interventions for the upgrading of carpentry joints are mainly based on empirical knowledge according to tradition. Often they produce a general strengthening of the connection, but are not specific for the case of seismic action. Strengthening on heuristic bases may be only partially effective or possibly disproportioned. The behavior of the carpentry joints most used in roof structures is examined. The birdsmouth joint, connecting rafters to the tie beam, has been studied first, characterizing its behavior numerically and experimentally in monotonic and cyclic conditions. Other forms of the rafter-to-tie connection, the double notch joint and the case of parallel rafters, are discussed. Some general criteria for the seismic strengthening of these joints are presented.

Communication dated 8 August 2006 from the Permanent Mission of Finland to the Agency concerning a Joint Action adopted by the Council of the European Union

International Nuclear Information System (INIS)

2006-01-01

The Secretariat has received a Note Verbale dated 8 August 2006 from the Permanent Mission of Finland, attaching a new Joint Action adopted by the Council of the European Union on 12 June 2006 on support for IAEA activities in the areas of nuclear security and verification as part of the EU Strategy against Proliferation of Weapons of Mass Destruction. As requested in the Note Verbale, the Note and its attachment are herewith circulated as an Information Circular

The Coordination Dynamics of Observational Learning: Relative Motion Direction and Relative Phase as Informational Content Linking Action-Perception to Action-Production.

Science.gov (United States)

Buchanan, John J

2016-01-01

The primary goal of this chapter is to merge together the visual perception perspective of observational learning and the coordination dynamics theory of pattern formation in perception and action. Emphasis is placed on identifying movement features that constrain and inform action-perception and action-production processes. Two sources of visual information are examined, relative motion direction and relative phase. The visual perception perspective states that the topological features of relative motion between limbs and joints remains invariant across an actor's motion and therefore are available for pickup by an observer. Relative phase has been put forth as an informational variable that links perception to action within the coordination dynamics theory. A primary assumption of the coordination dynamics approach is that environmental information is meaningful only in terms of the behavior it modifies. Across a series of single limb tasks and bimanual tasks it is shown that the relative motion and relative phase between limbs and joints is picked up through visual processes and supports observational learning of motor skills. Moreover, internal estimations of motor skill proficiency and competency are linked to the informational content found in relative motion and relative phase. Thus, the chapter links action to perception and vice versa and also links cognitive evaluations to the coordination dynamics that support action-perception and action-production processes.

Biomechanical design of escalading lower limb exoskeleton with novel linkage joints.

Science.gov (United States)

Zhang, Guoan; Liu, Gangfeng; Ma, Sun; Wang, Tianshuo; Zhao, Jie; Zhu, Yanhe

2017-07-20

In this paper, an obstacle-surmounting-enabled lower limb exoskeleton with novel linkage joints that perfectly mimicked human motions was proposed. Currently, most lower exoskeletons that use linear actuators have a direct connection between the wearer and the controlled part. Compared to the existing joints, the novel linkage joint not only fitted better into compact chasis, but also provided greater torque when the joint was at a large bend angle. As a result, it extended the angle range of joint peak torque output. With any given power, torque was prioritized over rotational speed, because instead of rotational speed, sufficiency of torque is the premise for most joint actions. With insufficient torque, the exoskeleton will be a burden instead of enhancement to its wearer. With optimized distribution of torque among the joints, the novel linkage method may contribute to easier exoskeleton movements.

Formation of non-equilibrium structures in R6M5 steel under strong pulse beams action

International Nuclear Information System (INIS)

Rusin, Yu.G.; Plotnikov, S.V.

2001-01-01

Formation of non-equilibrium structures in R6M5 steel surface layer in the supply state under irradiation by strong pulse beams (SPB) is examined. Cylindric samples with diameter 10 mm and height 15 mm of R6M5 fast-cutting steel with following content (weight %): 0.85% C, 0.4% Mn, 0.5% Si, 4.0 Cr; 2.1% V; 5.3% Mo, 6.0% W; 0.4% Ni, Fe (the rest) were examined. Irradiation by SPB was conducted on the 'TEMP' modified accelerator operating in a technological regime with carbon beams parameters: energy from 0.3 up o 0.4 MeV, beam density in an impulse from 20 to 250 A/cm 2 , pulse duration from 60 tp 100 ns. The beam consists of 70 % carbon ions and 30 % hydrogen ions. Phase identification and its structural phase analysis have been studied on the DRON-3 X-ray diffractometer of common assignment. Topography of metallographic specimen surface has been examined on the REM-200 scanning electron microscope. Doping elements redistribution and phases quantitative characteristics after SPB action were studied with help of the X-ray spectral microanalysis (XRSA) on the MS-46 Camebax microanalyzer. Character of doping elements redistribution in the alloy (XRSA data) show its appreciably redistribution, moreover in the melted zone the increased content of molybdenum, tungsten, vanadium is observing, and in the zone of thermal action its increase relatively to matrix values

Line-of-sight effects in strong lensing: putting theory into practice

Energy Technology Data Exchange (ETDEWEB)

Birrer, Simon; Welschen, Cyril; Amara, Adam; Refregier, Alexandre, E-mail: simon.birrer@phys.ethz.ch, E-mail: cyril.welschen@student.ethz.ch, E-mail: adam.amara@phys.ethz.ch, E-mail: alexandre.refregier@phys.ethz.ch [Institute for Astronomy, Department of Physics, ETH Zurich, Wolfgang-Pauli-Strasse 27, 8093, Zurich (Switzerland)

2017-04-01

We present a simple method to accurately infer line of sight (LOS) integrated lensing effects for galaxy scale strong lens systems through image reconstruction. Our approach enables us to separate weak lensing LOS effects from the main strong lens deflector. We test our method using mock data and show that strong lens systems can be accurate probes of cosmic shear with a precision on the shear terms of ± 0.003 (statistical error) for an HST-like dataset. We apply our formalism to reconstruct the lens COSMOS 0038+4133 and its LOS. In addition, we estimate the LOS properties with a halo-rendering estimate based on the COSMOS field galaxies and a galaxy-halo connection. The two approaches are independent and complementary in their information content. We find that when estimating the convergence at the strong lens system, performing a joint analysis improves the measure by a factor of two compared to a halo model only analysis. Furthermore the constraints of the strong lens reconstruction lead to tighter constraints on the halo masses of the LOS galaxies. Joint constraints of multiple strong lens systems may add valuable information to the galaxy-halo connection and may allow independent weak lensing shear measurement calibrations.

Communication dated 31 January 2014 received from the Permanent Mission of the Islamic Republic of Iran to the Agency concerning the text of the Joint Plan of Action

International Nuclear Information System (INIS)

2014-01-01

The Director General has received a communication dated 31 January 2014 from the Permanent Mission of the Islamic Republic of Iran to the Agency, concerning the text of the Joint Plan of Action agreed by the Islamic Republic of Iran and China, France, Germany, the Russian Federation, the United Kingdom and the United States of America on 24 November 2013. As requested, the communication is circulated herewith [es

Faults of solid-phase welding in titanium joints and their effect on strength

International Nuclear Information System (INIS)

Matyushkin, B.A.; Redchits, V.V.

1982-01-01

A possibility of the usage of thermal arc energy for the determination of the kinetics of solid-phase joint formation of the VT20 titanium alloy is found out experimentally. Positive action of diffusion annealing upon mechanical properties. of solid-phase joints is explained by the defect elimination

Electro-optically responsive composites of gold nanospheres in 5CB liquid crystal under direct current and alternating current joint action

International Nuclear Information System (INIS)

Hadjichristov, Georgi B.; Marinov, Yordan G.; Petrov, Alexander G.; Bruno, Emanuela; Marino, Lucia; Scaramuzza, Nicola

2014-01-01

Direct current (DC) electro-optical (EO) control of transmitted laser beam intensity based on EO controlled coherent light scattering and diffraction by stationary longitudinal texture pattern (LTP) is achieved in planar-oriented cells with a composite mixture of polymer-coated gold spherical nanoparticles (Au-NPs) with a mean diameter of about 12 nm and the room-temperature nematic pentylcyanobiphenyl (5CB). At relatively low DC voltage of about 5 V, the effective scattering/diffraction by Au-NPs/5CB composites leads to a spatial spreading of transmitted coherent light from a low-power continuous wave laser beam, resulting in a drastic reduction of its local intensity. The effect is polarization dependent and is strongest when the polarization of the input laser beam is along the LTP. The EO response of Au-NPs/5CB mixtures is studied under DC and alternating current (AC) joint action with the aim of the potential use of these composite materials as EO controlled diffusers. The specific V-shaped sharp dip in the DC voltage-dependent coherent light transmittance of Au-NPs/5CB planar films, as well as the possibility for erasing the scattering/diffractive LTP in the films by joint low AC voltage, can be useful for EO applications in the field of process control and for detection of weak dynamic electric fields

Electro-optically responsive composites of gold nanospheres in 5CB liquid crystal under direct current and alternating current joint action

Energy Technology Data Exchange (ETDEWEB)

Hadjichristov, Georgi B.; Marinov, Yordan G.; Petrov, Alexander G. [Institute of Solid State Physics, Bulgarian Academy of Sciences, Sofia 1784 (Bulgaria); Bruno, Emanuela [Dipartimento di Fisica, Università della Calabria, Via Pietro Bucci, Cubo 31C, 87036 Rende (CS) (Italy); Marino, Lucia, E-mail: lucia.marino@fis.unical.it [CNR-IPCF UoS di Cosenza, Licryl Laboratory, and Centro di Eccellenza CEMIF.CAL, Università della Calabria, 87036 Rende (CS) (Italy); Scaramuzza, Nicola [Dipartimento di Fisica, Università della Calabria, Via Pietro Bucci, Cubo 31C, 87036 Rende (CS) (Italy); CNR-IPCF UoS di Cosenza, Licryl Laboratory, and Centro di Eccellenza CEMIF.CAL, Università della Calabria, 87036 Rende (CS) (Italy)

2014-02-28

Direct current (DC) electro-optical (EO) control of transmitted laser beam intensity based on EO controlled coherent light scattering and diffraction by stationary longitudinal texture pattern (LTP) is achieved in planar-oriented cells with a composite mixture of polymer-coated gold spherical nanoparticles (Au-NPs) with a mean diameter of about 12 nm and the room-temperature nematic pentylcyanobiphenyl (5CB). At relatively low DC voltage of about 5 V, the effective scattering/diffraction by Au-NPs/5CB composites leads to a spatial spreading of transmitted coherent light from a low-power continuous wave laser beam, resulting in a drastic reduction of its local intensity. The effect is polarization dependent and is strongest when the polarization of the input laser beam is along the LTP. The EO response of Au-NPs/5CB mixtures is studied under DC and alternating current (AC) joint action with the aim of the potential use of these composite materials as EO controlled diffusers. The specific V-shaped sharp dip in the DC voltage-dependent coherent light transmittance of Au-NPs/5CB planar films, as well as the possibility for erasing the scattering/diffractive LTP in the films by joint low AC voltage, can be useful for EO applications in the field of process control and for detection of weak dynamic electric fields.

Participatory action research advances climate change adaptation ...

International Development Research Centre (IDRC) Digital Library (Canada)

2012-05-01

May 1, 2012 ... The Application of Participatory Action Research to Climate Change Adaptation in ... Soil fertility management · A series of country case studies ... to 2012 as a joint initiative of Canada's International Development Research ...

Skeleton-Based Human Action Recognition With Global Context-Aware Attention LSTM Networks

Science.gov (United States)

Liu, Jun; Wang, Gang; Duan, Ling-Yu; Abdiyeva, Kamila; Kot, Alex C.

2018-04-01

Human action recognition in 3D skeleton sequences has attracted a lot of research attention. Recently, Long Short-Term Memory (LSTM) networks have shown promising performance in this task due to their strengths in modeling the dependencies and dynamics in sequential data. As not all skeletal joints are informative for action recognition, and the irrelevant joints often bring noise which can degrade the performance, we need to pay more attention to the informative ones. However, the original LSTM network does not have explicit attention ability. In this paper, we propose a new class of LSTM network, Global Context-Aware Attention LSTM (GCA-LSTM), for skeleton based action recognition. This network is capable of selectively focusing on the informative joints in each frame of each skeleton sequence by using a global context memory cell. To further improve the attention capability of our network, we also introduce a recurrent attention mechanism, with which the attention performance of the network can be enhanced progressively. Moreover, we propose a stepwise training scheme in order to train our network effectively. Our approach achieves state-of-the-art performance on five challenging benchmark datasets for skeleton based action recognition.

Center vortices at strong couplings and all couplings

International Nuclear Information System (INIS)

Greensite, J.

2001-01-01

Motivations for the center vortex theory of confinement are discussed. In particular, it is noted that the abelian dual Meissner effect, which is the signature of dual superconductivity, cannot adequately describe the confining force at large distance scales. A long-range effective action is derived from strong-coupling lattice gauge theory in D=3 dimensions, and it is shown that center vortices emerge as the stable saddlepoints of this action. Thus, in the case of strong couplings, the vortex picture is arrived at analytically. I also respond briefly to a recent criticism regarding maximal center gauge. (author)

[Joint contractures in nursing textbooks].

Science.gov (United States)

Bartoszek, G; Meyer, G; Thiesemann, R

2014-01-01

The transparency criteria of the German statutory health insurance on joint contracture prevention have led to controversies about the appropriate assessment, prevention and treatment as well as to various actions in nursing practice. However, appropriate nursing assessments and proven treatment options are lacking so far. It is unclear whether textbooks on nursing reflect these uncertainties. Search for textbooks on nursing through internet-based search engines and publisher registers, data extraction by one investigator and control by a second. A total of 35 textbooks with contributions on joint contractures were identified of which 25 included a definition, causes/risk factors are presented in 32 textbooks and assessments are presented in 5 books. Most often positioning into a physiological or functional neutral position and passive moving of limbs are recommended as passive prophylaxis. Recommended therapeutic and preventive options do not differ. None of the textbooks reflect that there is a lack of scientific knowledge on the subject. Textbooks on nursing do not deal with complete and scientific sound information on joint contractures.

Joint implementation: Biodiversity and greenhouse gas offsets

Science.gov (United States)

Cutright, Noel J.

1996-11-01

One of the most pressing environmental issues today is the possibility that projected increases in global emissions of greenhouse gases from increased deforestation, development, and fossil-fuel combustion could significantly alter global climate patterns. Under the terms of the United Nations Framework Convention on Climate Change, signed in Rio de Janeiro during the June 1992 Earth Summit, the United States and other industrialized countries committed to balancing greenhouse gas emissions at 1990 levels in the year 2000. Included in the treaty is a provision titled “Joint Implementation,” whereby industrialized countries assist developing countries in jointly modifying long-term emission trends, either through emission reductions or by protecting and enhancing greenhouse gas sinks (carbon sequestration). The US Climate Action Plan, signed by President Clinton in 1993, calls for voluntary climate change mitigation measures by various sectors, and the action plan included a new program, the US Initiative on Joint Implementation. Wisconsin Electric decided to invest in a Jl project because its concept encourages creative, cost-effective solutions to environmental problems through partnering, international cooperation, and innovation. The project chosen, a forest preservation and management effort in Belize, will sequester more than five million tons of carbon dioxide over a 40-year period, will become economically selfsustaining after ten years, and will have substantial biodiversity benefits.

Phase synchronisation of the three leg joints in quiet human stance.

Science.gov (United States)

Günther, Michael; Putsche, Peter; Leistritz, Lutz; Grimmer, Sten

2011-03-01

Quiet human stance is a dynamic multi-segment phenomenon. In literature, coupled ankle and hip actions are in the focus and examinations are usually restricted to frequency contributions below 4 Hz. Very few studies point to the knee playing an active role, and just one study gives evidence of higher frequency contributions. In order to investigate the dynamic coupling of all three leg joints in more depth, we revisited an experimental data set on quiet human stance. Since phase synchronisation is a strong indicator of non-linear coupling behind, we used the phase synchronisation index (PSI) to quantify the degree of leg joint coupling as a function of frequency. One main result is that we did not find any synchronisation between ankle and hip across the whole frequency range examined up to 8 Hz. In contrast, there is significant synchronisation between ankle and knee at a couple of frequencies between 1.25 Hz and 8 Hz when looking at the kinematics. Their joint torques rather synchronise below 2 Hz. There is also synchronisation between knee and hip kinematics above 6 Hz, however, only significant at one frequency bin in our data set. From this, we would infer that the multiple mechanical degrees of freedom contributing to quiet human stance should be chosen according to, thus map, physiology. Thereby, the knee is indispensable and bi-articular muscles play a central role in organising quiet human stance. Examining the non-stationarity of phase synchronisations will probably advance the understanding of self-organisation of quiet human stance. Copyright © 2010 Elsevier B.V. All rights reserved.

Coordinating joint action in a technological environment: noticing and recruiting attention

DEFF Research Database (Denmark)

Egbert, Maria; Keating, Elizabeth

2011-01-01

Implementing Social Action: Constructing Turns and Sequences in ''Interaction Technologies'' [contribution to the panel Constructing social action in conversation, organized by Drew Paul] In investigating how turns and sequences might be designed to accomplish a particular social action, we look...... talked about or technologies used towards specific interactional goals in that they enable or make possible interaction. In designing turns and sequences in interaction enabled through interaction technologies, social actors must take into account a number of factors, including the effect of technology...... of interaction is to transmit information (cf. Shannon & Weaver 1949). Influenced by conversation analysis (CA) and ethnography, designers of new technologies are now becoming more aware that human use of technologies is always a part of social practices (Suchman 1987; Buur & Stienstra 2007). The foundations...

Limitations of gaze transfer: without visual context, eye movements do not to help to coordinate joint action, whereas mouse movements do.

Science.gov (United States)

Müller, Romy; Helmert, Jens R; Pannasch, Sebastian

2014-10-01

Remote cooperation can be improved by transferring the gaze of one participant to the other. However, based on a partner's gaze, an interpretation of his communicative intention can be difficult. Thus, gaze transfer has been inferior to mouse transfer in remote spatial referencing tasks where locations had to be pointed out explicitly. Given that eye movements serve as an indicator of visual attention, it remains to be investigated whether gaze and mouse transfer differentially affect the coordination of joint action when the situation demands an understanding of the partner's search strategies. In the present study, a gaze or mouse cursor was transferred from a searcher to an assistant in a hierarchical decision task. The assistant could use this cursor to guide his movement of a window which continuously opened up the display parts the searcher needed to find the right solution. In this context, we investigated how the ease of using gaze transfer depended on whether a link could be established between the partner's eye movements and the objects he was looking at. Therefore, in addition to the searcher's cursor, the assistant either saw the positions of these objects or only a grey background. When the objects were visible, performance and the number of spoken words were similar for gaze and mouse transfer. However, without them, gaze transfer resulted in longer solution times and more verbal effort as participants relied more strongly on speech to coordinate the window movement. Moreover, an analysis of the spatio-temporal coupling of the transmitted cursor and the window indicated that when no visual object information was available, assistants confidently followed the searcher's mouse but not his gaze cursor. Once again, the results highlight the importance of carefully considering task characteristics when applying gaze transfer in remote cooperation. Copyright © 2013 Elsevier B.V. All rights reserved.

Information basis for developing comprehensive waste management system-US-Japan joint nuclear energy action plan waste management working group phase I report.

Energy Technology Data Exchange (ETDEWEB)

Nutt, M.; Nuclear Engineering Division

2010-05-25

The activity of Phase I of the Waste Management Working Group under the United States - Japan Joint Nuclear Energy Action Plan started in 2007. The US-Japan JNEAP is a bilateral collaborative framework to support the global implementation of safe, secure, and sustainable, nuclear fuel cycles (referred to in this document as fuel cycles). The Waste Management Working Group was established by strong interest of both parties, which arise from the recognition that development and optimization of waste management and disposal system(s) are central issues of the present and future nuclear fuel cycles. This report summarizes the activity of the Waste Management Working Group that focused on consolidation of the existing technical basis between the U.S. and Japan and the joint development of a plan for future collaborative activities. Firstly, the political/regulatory frameworks related to nuclear fuel cycles in both countries were reviewed. The various advanced fuel cycle scenarios that have been considered in both countries were then surveyed and summarized. The working group established the working reference scenario for the future cooperative activity that corresponds to a fuel cycle scenario being considered both in Japan and the U.S. This working scenario involves transitioning from a once-through fuel cycle utilizing light water reactors to a one-pass uranium-plutonium fuel recycle in light water reactors to a combination of light water reactors and fast reactors with plutonium, uranium, and minor actinide recycle, ultimately concluding with multiple recycle passes primarily using fast reactors. Considering the scenario, current and future expected waste streams, treatment and inventory were discussed, and the relevant information was summarized. Second, the waste management/disposal system optimization was discussed. Repository system concepts were reviewed, repository design concepts for the various classifications of nuclear waste were summarized, and the factors

RILEM International Symposium on Materials and Joints in Timber Structures

CERN Document Server

Reinhardt, H-W; Garrecht, Harald

2014-01-01

This book contains the contributions from the RILEM International Symposium on Materials and Joints in Timber Structures that was held in Stuttgart, Germany from October 8 to 10, 2013. It covers recent developments in the materials and the joints used in modern timber structures. Regarding basic wooden materials, the contributions highlight the widened spectrum of products comprising cross-laminated timber, glulam and LVL from hardwoods and block glued elements. Timber concrete compounds, cement bonded wood composites and innovative light-weight constructions represent increasingly employed alternatives for floors, bridges and facades. With regard to jointing technologies, considerable advances in both mechanical connections and glued joints are presented. Self-tapping screws have created unprecedented options for reliable, strong as well as ductile joints and reinforcement technologies. Regarding adhesives, which constitute the basis of the jointing/laminating technology of modern timber products, extended o...

75 FR 33306 - Notice of Meeting Location Change and Joint Meeting of FASAB and GASB

Science.gov (United States)

2010-06-11

... meeting is to discuss: --Measurement Attributes, --Reporting Model, --Cost Accounting, and --Governance... FEDERAL ACCOUNTING STANDARDS ADVISORY BOARD Notice of Meeting Location Change and Joint Meeting of FASAB and GASB AGENCY: Federal Accounting Standards Advisory Board. ACTION: Notice. Board Action...

Determination of brazed joint constitutive law by inverse method

International Nuclear Information System (INIS)

Lovato, G.; Moret, F.; Gallo, P. le; Cailletaud, G.; Pilvin, P.

1993-01-01

An important parameter often neglected for the calculation of residual stresses in brazed ceramic/metal assemblies is the joint constitutive law. In situ camber measurements on a model system (axisymmetric TZM/InCuSil ABA/316L samples) performed using a special vertical dilatometer during the whole brazing thermal cycle are compared with results of FEM calculations based on published filler metal constitutive laws. A strong disagreement is observed. Actual constitutive law of the joint is determined from these measurements using a numerical inverse method. Calculated displacements are fully consistent with experimental ones. True solidification temperature of the joint is determined. The identified constitutive law of the joint exhibits a low flow stress from solidification temperature to 320 C. (orig.)

Peripheral degenerative joint diseases

Directory of Open Access Journals (Sweden)

Nilzio Antonio da Silva

2008-03-01

Full Text Available Osteoarthritis, a degenerative joint disease, is the most commonrheumatic disorder mainly in a geriatric population. Manifestationsare pain, stiffness and functional loss in the affected joint.According to etiology it is classifi ed as primary (or idiopathicand secondary. Some risk factors for disease development aregenetics, race, age, sex, obesity, occupational activities andarticular biomechanics. Pathogenesis is the same for any cause orlocalization, being catabolic alterations, with synthesis, inhibitionand reparing intent of the cartilage matrix. Metalloproteinases andcytokines (IL-1,IL-6,TNF-α actions promote infl ammatory reactionand cartilage degradation. Pain, the most important symptom,does not correlate with radiologic fi ndings. Peripheral osteoarthritisoccurs predominantly in the knee, hip and hand. Diagnosis is basedon clinical features, laboratorial tests and radiological changes.Rheumatological associations’ guidelines for treatment includenon-pharmacologic (education, physiotherapy, assistive devices,and pharmacologic (analgesics, anti-infl ammatory drugs therapyand surgery. Arthroplasty seems to work better than medicines, butshould be used if other treatments have failed.

Variant selection of martensites in steel welded joints with low transformation temperature weld metals

International Nuclear Information System (INIS)

Takahashi, Masaru; Yasuda, Hiroyuki Y.

2013-01-01

Highlights: ► We examined the variant selection of martensites in the weld metals. ► We also measured the residual stress developed in the butt and box welded joints. ► 24 martensite variants were randomly selected in the butt welded joint. ► High tensile residual stress in the box welded joint led to the strong variant selection. ► We discussed the rule of the variant selection focusing on the residual stress. -- Abstract: Martensitic transformation behavior in steel welded joints with low transformation temperature weld (LTTW) metal was examined focusing on the variant selection of martensites. The butt and box welded joints were prepared with LTTW metals and 980 MPa grade high strength steels. The residual stress of the welded joints, which was measured by a neutron diffraction technique, was effectively reduced by the expansion of the LTTW metals by the martensitic transformation during cooling after the welding process. In the LTTW metals, the retained austenite and martensite phases have the Kurdjumov–Sachs (K–S) orientation relationship. The variant selection of the martensites in the LTTW metals depended strongly on the type of welded joints. In the butt welded joint, 24 K–S variants were almost randomly selected while a few variants were preferentially chosen in the box welded joint. This suggests that the high residual stress developed in the box welded joint accelerated the formation of specific variants during the cooling process, in contrast to the butt welded joint with low residual stress

The Cost of Jointness: Insights from Environmental Monitoring Systems in Low-Earth Orbit

Energy Technology Data Exchange (ETDEWEB)

Dwyer, Morgan Maeve [Massachusetts Inst. of Technology (MIT), Cambridge, MA (United States); Sandia National Lab. (SNL-NM), Albuquerque, NM (United States)

2014-09-01

This report summarizes the results of doctoral research that explored the cost impact of acquiring complex government systems jointly. The report begins by reviewing recent evidence that suggests that joint programs experience greater cost growth than non-joint programs. It continues by proposing an alternative approach for studying cost growth on government acquisition programs and demonstrates the utility of this approach by applying it to study the cost of jointness on three past programs that developed environmental monitoring systems for low-Earth orbit. Ultimately, the report concludes that joint programs' costs grow when the collaborating government agencies take action to retain or regain their autonomy. The report provides detailed qualitative and quantitative data in support of this conclusion and generalizes its findings to other joint programs that were not explicitly studied here. Finally, it concludes by presenting a quantitative model that assesses the cost impacts of jointness and by demonstrating how government agencies can more effectively architect joint programs in the future.

The influence of passionate love on self-other discrimination during joint action.

Science.gov (United States)

Quintard, Virginie; Jouffre, Stéphane; Croizet, Jean-Claude; Bouquet, Cedric A

2018-01-16

Prior research on romantic relationships suggests that being in love involves a blurring of self-other cognitive boundaries. However, this research has focused so far on conceptual self-representation, related to the individual's traits or interests. The present study tested the hypothesis that passionate love involves a reduced discrimination between the self and the romantic partner at a bodily level, as indexed by an increased Joint Simon effect (JSE), and we further examined whether this self-other discrimination correlated with the passion felt for the partner. As predicted, we found an increased JSE when participants performed the Joint Simon Task with their romantic partner compared with a friend of the opposite sex. Providing support for the self-expansion model of love (Aron and Aron in Pers Relatsh 3(1):45-58, 1996), this result indicates that romantic relationships blur the boundaries between the self and the romantic partner at a bodily level. Furthermore, the strength of romantic feelings was positively correlated with the magnitude of the JSE when sharing the task with the romantic partner.

Prospection in Cognition: The Case for Joint Episodic-Procedural Memory in Cognitive Robotics

Directory of Open Access Journals (Sweden)

David eVernon

2015-07-01

Full Text Available Prospection lies at the core of cognition: it is the means by which an agent — a person or a cognitive robot — shifts its perspective from immediate sensory experience to anticipate future events, be they the actions of other agents or the outcome of its own actions. Prospection, accomplished by internal simulation, requires mechanisms for both perceptual imagery and motor imagery. While it is known that these two forms of imagery are tightly entwined in the mirror neuron system, we do not yet have an effective model of the mentalizing network which would provide a framework to integrate declarative episodic and procedural memory systems and to combine experiential knowledge with skillful know-how. Such a framework would be founded on joint perceptuo-motor representations. In this paper we examine the case for this form of representation, contrasting sensory-motor theory with ideo-motor theory, and we discuss how such a framework could be realized by joint episodic-procedural memory. We argue that such a representation framework has several advantages for cognitive robotics. Since episodic memory operates by recombining imperfectly recalled past experience, this allows it to simulate new or unexpected events. Furthermore, by virtue of its associative nature, joint episodic-procedural memory allows the internal simulation to be conditioned by current context, semantic memory, and the agent’s value system. Context and semantics constrain the combinatorial explosion of potential perception-action associations and allow effective action selection in the pursuit of goals, while the value system provides the motives that underpin the agent’s autonomy and cognitive development. This joint episodic-procedural memory framework is neutral regarding the final implementation of these episodic and procedural memories, which can be configured sub-symbolically as associative networks or symbolically as content-addressable image databases and databases

Skeleton-based human action recognition using multiple sequence alignment

Science.gov (United States)

Ding, Wenwen; Liu, Kai; Cheng, Fei; Zhang, Jin; Li, YunSong

2015-05-01

Human action recognition and analysis is an active research topic in computer vision for many years. This paper presents a method to represent human actions based on trajectories consisting of 3D joint positions. This method first decompose action into a sequence of meaningful atomic actions (actionlets), and then label actionlets with English alphabets according to the Davies-Bouldin index value. Therefore, an action can be represented using a sequence of actionlet symbols, which will preserve the temporal order of occurrence of each of the actionlets. Finally, we employ sequence comparison to classify multiple actions through using string matching algorithms (Needleman-Wunsch). The effectiveness of the proposed method is evaluated on datasets captured by commodity depth cameras. Experiments of the proposed method on three challenging 3D action datasets show promising results.

Harmonization of sound insulation descriptors and classification schemes in Europe: COST Action TU0901

DEFF Research Database (Denmark)

Rasmussen, Birgit

-in-Chief. Handbook of noise and vibration control, USA: Wiley and Son; 2007 [Ch. 114]. [4] COST Action TU0901 “Integrating and Harmonizing Sound Insulation Aspects in Sustainable Urban Housing Constructions”, 2009-2013, www.cost.eu/index.php?id=240&action_number=tu0901 (public information at COST website) or http...... insulation requirements seems unrealistic. However, by preparing a harmonized European classification scheme with a number of quality classes, member states could select a "harmonized" class fitting the national needs and conditions. A joint European Action, COST Action TU0901 "Integrating and Harmonizing...... on good workmanship. The paper will summarize the background, discuss the present situation in Europe and describe the joint efforts to reduce the diversity in Europe, thus supporting and initiating – where needed – improvement of sound insulation of new and existing dwellings in Europe to the benefit...

Joint Mission Command Implementation

Science.gov (United States)

2016-01-22

choose. The paper finds that trust is strongly influenced by the subconscious brain and treating it like a tool ignores biology and results in... bias for action and empowerment.14 Since then, the services have evaluated their own concepts of command assessing them against Dempsey’s vision. Lt...understanding, intent, and trust, only trust is strongly influenced by the subconscious brain. Treating trust like it can be taught, or a behavior that

Communication received from the Resident Representatives of the Russian Federation and the United States of America to the IAEA enclosing the text of a declaration on nuclear energy and nonproliferation joint actions, and the text of a joint statement by the Minister for Foreign Affairs of the Russian Federation, Sergey Lavrov, and U.S. Secretary of State, Condoleezza Rice

International Nuclear Information System (INIS)

2007-01-01

The Director General has received a communication dated 10 July 2007 from the Resident Representatives of the Russian Federation and the United States of America with the attachments of a Declaration on Nuclear Energy and Nonproliferation Joint Actions published by the Russian Federation and the United States of America on 3 July 2007; and the text of a Joint Statement by the Minister for Foreign Affairs of the Russian Federation Sergey Lavrov and U.S. Secretary of State Condoleezza Rice. As requested in that communication, the letter and its attachments are circulated for the information of Member States

Insider Threat: Preventing Direct Action Attacks Within the United States Army

Science.gov (United States)

2017-06-09

Intelligence Agency, 2012. Joint Chiefs of Staff. Joint Publication (JP) 3-07.2, Antiterrorism. Washington, DC: Government Printing Office, 2010. 81...Federal Bureau of Investigation GEN General (Army rank, O-10) HIPAA Health Insurance Portability and Accountability Act of 1996 INSCOM Intelligence and...commanders, and the intelligence community to prevent insider threats from developing into direct action attacks, this study sought to answer the

Cervical joint position sense in neck pain. Immediate effects of muscle vibration versus mental training interventions: a RCT.

Science.gov (United States)

Beinert, K; Preiss, S; Huber, M; Taube, W

2015-12-01

Impaired cervical joint position sense is a feature of chronic neck pain and is commonly argued to rely on abnormal cervical input. If true, muscle vibration, altering afferent input, but not mental interventions, should have an effect on head repositioning acuity and neck pain perception. The aim of the present study was to determine the short-term effects of neck muscle vibration, motor imagery, and action observation on cervical joint position sense and pressure pain threshold in people with chronic neck pain. Forty-five blinded participants with neck pain received concealed allocation and were randomized in three treatment groups. A blinded assessor performed pre- and post-test measurement. Patients were recruited from secondary outpatient clinics in the southwest of Germany. Chronic, non specific neck pain patients without arm pain were recruited for this study. A single intervention session of 5 minutes was delivered to each blinded participant. Patients were either allocated to one of the following three interventions: (1) neck muscle vibration; (2) motor imagery; (3) action observation. Primary outcomes were cervical joint position sense acuity and pressure pain threshold. Repeated measures ANOVAs were used to evaluate differences between groups and subjects. Repositioning acuity displayed significant time effects for vibration, motor imagery, and action observation (all Ppain threshold demonstrated a time*group effect (P=0.042) as only vibration significantly increased pressure pain threshold (P=0.01). Although motor imagery and action observation did not modulate proprioceptive, afferent input, they nevertheless improved cervical joint position sense acuity. This indicates that, against the common opinion, changes in proprioceptive input are not prerequisite to improve joint repositioning performance. However, the short-term applications of these cognitive treatments had no effect on pressure pain thresholds, whereas vibration reduced pressure pain

Lumbar spine joint synovial cysts of intraspinal development. CT scan imaging

Energy Technology Data Exchange (ETDEWEB)

Vallee, C.; Chevrot, A.; Benhamouda, M. and others

CT scan imaging findings are described in 22 patients with lumbar spine joint synovial cysts, of intraspinal development, provoking sciatica or lumbosciatica from nerve compression in spinal canal. Diagnosis was suggested by a mass at the posterior joint level, of variable density, sometimes with peripheral calcification, presenting a vacuum appearance on occasions, and with enhanced image with contrast. Differential diagnosis is from excluded hernia and postoperative fibrosis. Posterior intra-articular arthrography can confirm diagnosis and allow treatment with prolonged action corticoid infiltrations.

Phalangeal joints kinematics during ostrich (Struthio camelus locomotion

Directory of Open Access Journals (Sweden)

Rui Zhang

2017-01-01

Full Text Available The ostrich is a highly cursorial bipedal land animal with a permanently elevated metatarsophalangeal joint supported by only two toes. Although locomotor kinematics in walking and running ostriches have been examined, these studies have been largely limited to above the metatarsophalangeal joint. In this study, kinematic data of all major toe joints were collected from gaits with double support (slow walking to running during stance period in a semi-natural setup with two selected cooperative ostriches. Statistical analyses were conducted to investigate the effect of locomotor gait on toe joint kinematics. The MTP3 and MTP4 joints exhibit the largest range of motion whereas the first phalangeal joint of the 4th toe shows the largest motion variability. The interphalangeal joints of the 3rd and 4th toes present very similar motion patterns over stance phases of slow walking and running. However, the motion patterns of the MTP3 and MTP4 joints and the vertical displacement of the metatarsophalangeal joint are significantly different during running and slow walking. Because of the biomechanical requirements, osctriches are likely to select the inverted pendulum gait at low speeds and the bouncing gait at high speeds to improve movement performance and energy economy. Interestingly, the motions of the MTP3 and MTP4 joints are highly synchronized from slow to fast locomotion. This strongly suggests that the 3rd and 4th toes really work as an “integrated system” with the 3rd toe as the main load bearing element whilst the 4th toe as the complementary load sharing element with a primary role to ensure the lateral stability of the permanently elevated metatarsophalangeal joint.

Joint estimation over multiple individuals improves behavioural state inference from animal movement data.

Science.gov (United States)

Jonsen, Ian

2016-02-08

State-space models provide a powerful way to scale up inference of movement behaviours from individuals to populations when the inference is made across multiple individuals. Here, I show how a joint estimation approach that assumes individuals share identical movement parameters can lead to improved inference of behavioural states associated with different movement processes. I use simulated movement paths with known behavioural states to compare estimation error between nonhierarchical and joint estimation formulations of an otherwise identical state-space model. Behavioural state estimation error was strongly affected by the degree of similarity between movement patterns characterising the behavioural states, with less error when movements were strongly dissimilar between states. The joint estimation model improved behavioural state estimation relative to the nonhierarchical model for simulated data with heavy-tailed Argos location errors. When applied to Argos telemetry datasets from 10 Weddell seals, the nonhierarchical model estimated highly uncertain behavioural state switching probabilities for most individuals whereas the joint estimation model yielded substantially less uncertainty. The joint estimation model better resolved the behavioural state sequences across all seals. Hierarchical or joint estimation models should be the preferred choice for estimating behavioural states from animal movement data, especially when location data are error-prone.

Increasing the Strength of Adhesively Bonded Joints by Tapering the Adherends

International Nuclear Information System (INIS)

GUESS, TOMMY R.; METZINGER, KURT E.

1999-01-01

Wind turbine blades are often fabricated with composite materials. These composite blades are frequently attached to a metallic structure with an adhesive bond. For the baseline composite-to-steel joint considered in this study, failure typically occurs when the adhesive debonds from the steel adherend. Previous efforts established that the adhesive peel stresses strongly influence the strength of these joints for both single-cycle and fatigue loading. This study focused on reducing the adhesive peel stresses present in these joints by tapering the steel adherends. Several different tapers were evaluated using finite element analysis before arriving at a final design. To confirm that the selected taper was an improvement to the existing design, the baseline joint and the modified joint were tested in both compression and tension. In these axial tests, the compressive strengths of the joints with tapered adherends were greater than those of the baseline joints for both single-cycle and low-cycle fatigue. In addition, only a minor reduction in tensile strength was observed for the joints with tapered adherends when compared to the baseline joints. Thus, the modification would be expected to enhance the overall performance of this joint

Body sway reflects leadership in joint music performance.

Science.gov (United States)

Chang, Andrew; Livingstone, Steven R; Bosnyak, Dan J; Trainor, Laurel J

2017-05-23

The cultural and technological achievements of the human species depend on complex social interactions. Nonverbal interpersonal coordination, or joint action, is a crucial element of social interaction, but the dynamics of nonverbal information flow among people are not well understood. We used joint music making in string quartets, a complex, naturalistic nonverbal behavior, as a model system. Using motion capture, we recorded body sway simultaneously in four musicians, which reflected real-time interpersonal information sharing. We used Granger causality to analyze predictive relationships among the motion time series of the players to determine the magnitude and direction of information flow among the players. We experimentally manipulated which musician was the leader (followers were not informed who was leading) and whether they could see each other, to investigate how these variables affect information flow. We found that assigned leaders exerted significantly greater influence on others and were less influenced by others compared with followers. This effect was present, whether or not they could see each other, but was enhanced with visual information, indicating that visual as well as auditory information is used in musical coordination. Importantly, performers' ratings of the "goodness" of their performances were positively correlated with the overall degree of body sway coupling, indicating that communication through body sway reflects perceived performance success. These results confirm that information sharing in a nonverbal joint action task occurs through both auditory and visual cues and that the dynamics of information flow are affected by changing group relationships.

Phytomedicine in Joint Disorders

Directory of Open Access Journals (Sweden)

Dorin Dragos

2017-01-01

Full Text Available Chronic joint inflammatory disorders such as osteoarthritis and rheumatoid arthritis have in common an upsurge of inflammation, and oxidative stress, resulting in progressive histological alterations and disabling symptoms. Currently used conventional medication (ranging from pain-killers to biological agents is potent, but frequently associated with serious, even life-threatening side effects. Used for millennia in traditional herbalism, medicinal plants are a promising alternative, with lower rate of adverse events and efficiency frequently comparable with that of conventional drugs. Nevertheless, their mechanism of action is in many cases elusive and/or uncertain. Even though many of them have been proven effective in studies done in vitro or on animal models, there is a scarcity of human clinical evidence. The purpose of this review is to summarize the available scientific information on the following joint-friendly medicinal plants, which have been tested in human studies: Arnica montana, Boswellia spp., Curcuma spp., Equisetum arvense, Harpagophytum procumbens, Salix spp., Sesamum indicum, Symphytum officinalis, Zingiber officinalis, Panax notoginseng, and Whitania somnifera.

Reflections on the Action Assembly ANADP

OpenAIRE

Farquhar, Adam

2014-01-01

Aligning National Approaches to Digital Preservation: An Action Assembly Biblioteca de Catalunya (National Library of Catalonia) November 18-20, 2013, Barcelona, Spain Auburn University Council on Library and Information Resources (CLIR) Digital Curation Centre (DCC) Digital Preservation Network (DPN) Joint Information Systems Committee (JISC) University of North Texas Virginia Tech Interuniversity Consortium for Political and Social Research (ICPSR) Innovative Inte...

75 FR 78338 - Meeting of the United States-Oman Joint Forum on Environmental Cooperation Pursuant to the United...

Science.gov (United States)

2010-12-15

... DEPARTMENT OF STATE [Public Notice 7261] Meeting of the United States-Oman Joint Forum on Environmental Cooperation Pursuant to the United States-Oman Memorandum of Understanding on Environmental Cooperation ACTION: Notice of the meeting of the U.S.-Oman Joint Forum on Environmental Cooperation and...

Joint Facial Action Unit Detection and Feature Fusion: A Multi-Conditional Learning Approach

NARCIS (Netherlands)

Eleftheriadis, Stefanos; Rudovic, Ognjen; Pantic, Maja

2016-01-01

Automated analysis of facial expressions can benefit many domains, from marketing to clinical diagnosis of neurodevelopmental disorders. Facial expressions are typically encoded as a combination of facial muscle activations, i.e., action units. Depending on context, these action units co-occur in

Joint Degree Program: the Perspective of Employers

Directory of Open Access Journals (Sweden)

Tatjana Bilevičienė

2013-08-01

Full Text Available Purpose — the purpose of this article is to extend discussion towards the need and importance of joint degree programs in modern universities, introducing the perspective of the employers toward this question. Design/methodology/approach — the research was conducted to analyze the demand of joint degree programs from the perspective of employers, identify weak and strong aspects, opinion and demand for graduates of such programs. To achieve this purpose, a combination of theoretical and empirical methods was chosen: document analysis (previous studies, statistics was conducted and an online qualitative survey was organized. Findings — The analysis of articles, studies and statistics points out the challenges and threats faced by universities nowadays, forcing higher education institutions to find new ways to raise the quality of studies and raise the interest of employers to choose graduates from MRU, as well as the satisfaction of employers with their choice of employees. Theoretical analysis pointed out these challenges and requirements for the modern employee, summarised the challenges in preparation of IT field specialists. The conducted research results showed that the diploma of joint degree programs would not be treated as an advantage of possible employee from the perspective of employers in case some important aspects will not be taken into consideration by program creators. On the other hand, undeniably there are strong sides, such as knowledge in the fields of foreign language, international experience, innovativeness and creativeness of employees that would be treated as an advantage in the process of selection for positions of any technical support related positions. Research limitations/implications — employers, whose business activities are closely related to information technology, have been invited as experts. In addition, these experts have a good understanding of the specifics of joint degree programs. The received

Hydrogen effects in duplex stainless steel welded joints - electrochemical studies

Science.gov (United States)

Michalska, J.; Łabanowski, J.; Ćwiek, J.

2012-05-01

In this work results on the influence of hydrogen on passivity and corrosion resistance of 2205 duplex stainless steel (DSS) welded joints are described. The results were discussed by taking into account three different areas on the welded joint: weld metal (WM), heat-affected zone (HAZ) and parent metal. The corrosion resistance was qualified with the polarization curves registered in a synthetic sea water. The conclusion is that, hydrogen may seriously deteriorate the passive film stability and corrosion resistance to pitting of 2205 DSS welded joints. The presence of hydrogen in passive films increases corrosion current density and decreases the potential of the film breakdown. It was also found that degree of susceptibility to hydrogen degradation was dependent on the hydrogen charging conditions. WM region has been revealed as the most sensitive to hydrogen action.

the effects of symphysiotomy on the bantu female sacro-iliac joint

African Journals Online (AJOL)

The 75-year-old male therefore has a joint which is a synarthrosis, and the ... made which show a surprisingly wide range of sacral move- ments of a rotatory ... muscular action.12 ... There is very good reason to believe that this reaction is.

Platforms and terraces : bridging participation and GIS in joint-learning for watershed management with the Ifugaos of the Philippines

NARCIS (Netherlands)

Gonzalez, R.M.

2000-01-01

Complex multi-actor problem situations in natural resource management (NRM) need the convergence of different knowledge processes, first of all, in understanding and agreeing what the problem is before aspiring for joint-action. This is a joint-learning approach in NRM. Geographic

An analysis of a joint shear model for jointed media with orthogonal joint sets

International Nuclear Information System (INIS)

Koteras, J.R.

1991-10-01

This report describes a joint shear model used in conjunction with a computational model for jointed media with orthogonal joint sets. The joint shear model allows nonlinear behavior for both joint sets. Because nonlinear behavior is allowed for both joint sets, a great many cases must be considered to fully describe the joint shear behavior of the jointed medium. An extensive set of equations is required to describe the joint shear stress and slip displacements that can occur for all the various cases. This report examines possible methods for simplifying this set of equations so that the model can be implemented efficiently form a computational standpoint. The shear model must be examined carefully to obtain a computationally efficient implementation that does not lead to numerical problems. The application to fractures in rock is discussed. 5 refs., 4 figs

Design of a Virtual Player for Joint Improvisation with Humans in the Mirror Game.

Science.gov (United States)

Zhai, Chao; Alderisio, Francesco; Słowiński, Piotr; Tsaneva-Atanasova, Krasimira; di Bernardo, Mario

2016-01-01

Joint improvisation is often observed among humans performing joint action tasks. Exploring the underlying cognitive and neural mechanisms behind the emergence of joint improvisation is an open research challenge. This paper investigates jointly improvised movements between two participants in the mirror game, a paradigmatic joint task example. First, experiments involving movement coordination of different dyads of human players are performed in order to build a human benchmark. No designation of leader and follower is given beforehand. We find that joint improvisation is characterized by the lack of a leader and high levels of movement synchronization. Then, a theoretical model is proposed to capture some features of their interaction, and a set of experiments is carried out to test and validate the model ability to reproduce the experimental observations. Furthermore, the model is used to drive a computer avatar able to successfully improvise joint motion with a human participant in real time. Finally, a convergence analysis of the proposed model is carried out to confirm its ability to reproduce joint movements between the participants.

On the radiation exposure in temporomandibular joint examinations

International Nuclear Information System (INIS)

Rother, U.; Hildebrandt, K.H.

1979-01-01

The radiation exposure caused by standardized examinations of the temporomandibular joint has been determined with the aid of 660 exposures of an Alderson phantom. Comparative examinations were performed with the classic contact technique according to Parma to elucidate the results obtained. The lowest surface exposure was observed in contact examinations of the temporomandibular joint. Application of a flat cone led to a 13-fold reduction in surface exposure compared to contact examinations according to Parma. Furthermore, radiation exposure strongly decreased from the irradiation field to the adjacent area if a cone (flat cone and ear cone) was used. (author)

Fires, A Joint Professional Bulletin for US Field & Air Defense Artillerymen. March-April 2008

Science.gov (United States)

2008-04-01

actions. However, if the effects synchronization division were not added to the lineup , just the teaming of joint fires division and IO division still...ADAFCO would be the liaison between the two Services who coordinates fires and facilitates track identification thus preventing fratricide. Joint...decisions to be made based on current air users versus planned control measures. Interoperability. Identification is a key feature that enables AC2 nodes

Body sway reflects leadership in joint music performance

Science.gov (United States)

Livingstone, Steven R.; Bosnyak, Dan J.; Trainor, Laurel J.

2017-01-01

The cultural and technological achievements of the human species depend on complex social interactions. Nonverbal interpersonal coordination, or joint action, is a crucial element of social interaction, but the dynamics of nonverbal information flow among people are not well understood. We used joint music making in string quartets, a complex, naturalistic nonverbal behavior, as a model system. Using motion capture, we recorded body sway simultaneously in four musicians, which reflected real-time interpersonal information sharing. We used Granger causality to analyze predictive relationships among the motion time series of the players to determine the magnitude and direction of information flow among the players. We experimentally manipulated which musician was the leader (followers were not informed who was leading) and whether they could see each other, to investigate how these variables affect information flow. We found that assigned leaders exerted significantly greater influence on others and were less influenced by others compared with followers. This effect was present, whether or not they could see each other, but was enhanced with visual information, indicating that visual as well as auditory information is used in musical coordination. Importantly, performers’ ratings of the “goodness” of their performances were positively correlated with the overall degree of body sway coupling, indicating that communication through body sway reflects perceived performance success. These results confirm that information sharing in a nonverbal joint action task occurs through both auditory and visual cues and that the dynamics of information flow are affected by changing group relationships. PMID:28484007

Functional anatomy of the temporo-mandibular joint (II).

Science.gov (United States)

Sava, Anca; Scutariu, Monica

2012-01-01

Jaw movement is analyzed as an action between two rigid components jointed together in a particular way, the movable mandible against the stabilized cranium. Opening and closing movements are symmetrical; that is, both sides of the cranio-mandibular articulation are making the same movements. Protrusive and retrusive movements may also be symmetrical. The mandibular muscles determine all the complicated postures and-movements of the jaw. Their behavior can be greatly clarified by restating certain fundamentals crucial to purposive muscular activity. The joint derives its arterial supply from the superficial temporal artery and the maxillary artery. Branches of the auriculo-temporal and masseteric nerves and postganglionic sympathetic nerves supply the tissues associated with the capsular ligament and the looser posterior bilaminar extension of the disc.

Design and test of lightweight sandwich T-joint for naval ships

DEFF Research Database (Denmark)

Toftegaard, H.; Lystrup, Aa.

2005-01-01

Within the EUCLID project, 'Survivability, Durability and Performance of Naval Composite Structures', one task is to develop improved fibre composite joints for naval ship super structures. One type of joint in such a super structure is a T-joint between sandwich panels. An existing design consists...... of panels joined by filler and overlaminates of the same thickness as the skin laminates. Various improved T-joints have been designed and investigated. Some with focus on improved strength (survivability), and others with focus on reduced weight. This paper describes the design and test of a sandwich T...... triangles). A method for a finite element (FE) parameter study is developed and used for selection of a promising (strong) configuration of the T-joint. Tensile (pull-out) tests are performed to load the core triangles and filler in tension and the strength and failure mode are compared both with the FE...

Resveratrol exhibits a strong cytotoxic activity in cultured cells and has an antiviral action against polyomavirus: potential clinical use

Directory of Open Access Journals (Sweden)

Galati Gaspare

2009-07-01

Full Text Available Abstract Background Resveratrol is a non flavonoid polyphenol compound present in many plants and fruits and, at especially high concentrations, in the grape berries of Vitis vinifera. This compound has a strong bioactivity and its cytoprotective action has been demonstrated, however at high concentrations the drug exhibits also an effective anti-proliferative action. We recently showed its ability to abolish the effects of oxidative stress in cultured cells. In this work we assayed the bioactivity of resveratrol as antiproliferative and antiviral drug in cultured fibroblasts. Studies by other Authors showed that this natural compound inhibits the proliferation of different viruses such as herpes simplex, varicella-zoster and influenza A. The results presented here show an evident toxic activity of the drug at high concentrations, on the other hand at sub-cytotoxic concentrations, resveratrol can effectively inhibit the synthesis of polyomavirus DNA. A possible interpretation is that, due to the damage caused by resveratrol to the plasma membrane, the transfer of the virus from the endoplasmic reticulum to the nucleus, may be hindered thus inhibiting the production of viral DNA. Methods The mouse fibroblast line 3T6 and the human tumor line HL60 were used throughout the work. Cell viability and vital cell count were assessed respectively, by the MTT assay and Trypan Blue staining. Cytotoxic properties and evaluation of viral DNA production by agarose gel electrophoresis were performed according to standard protocols. Results Our results show a clear dose dependent both cytotoxic and antiviral effect of resveratrol respectively at high and low concentrations. The cytotoxic action is exerted towards a stabilized cell-line (3T6 as well as a tumor-line (HL60. Furthermore the antiviral action is evident after the phase of virion entry, therefore data suggest that the drug acts during the synthesis of the viral progeny DNA. Conclusion Resveratrol is

Transmission and Distribution: AREVA takes further action to reinforce its presence in China

International Nuclear Information System (INIS)

2007-05-01

Following the recent opening of its new gas-insulated switchgear factory last month in Suzhou, China, AREVA's Transmission and Distribution (T and D) division has announced additional actions to increase its market share in the country. The division has just signed an agreement to form a 50/50 joint venture with the Chinese company, Sunten Electric Co. Ltd., a leading manufacturer of distribution transformers, whose 2006 annual sales reached circa euro 120 million. Through this joint venture, AREVA T and D will become No 1 in China for dry-type transformers, Sunten Electric Co. Ltd.'s specialization. AREVA T and D has also established a partnership with the China Electric Power Research Institute (C-EPRI), a leading Chinese organization specialized in electrical technologies. Under the agreement, C-EPRI will be the official licensee for AREVA T and D's H-400 high-voltage direct current (HVDC) Thyristor valves in China. The partnership will enable AREVA T and D to enter the fast-growing domestic HVDC market. The T and D sector in China represents 24% of the worldwide transmission and distribution market. AREVA T and D's turnover in China, where demand for T and D equipment is growing strongly, should significantly contribute to the division's objective to reach euro 5 billion in sales by 2010

Corrective Action Decision Document/Closure Report for Corrective Action Unit 383: Area E-Tunnel Sites, Nevada Test Site

Energy Technology Data Exchange (ETDEWEB)

NSTec Environmental Restoration

2010-03-15

This Corrective Action Decision Document/Closure Report (CADD/CR) was prepared by the Defense Threat Reduction Agency (DTRA) for Corrective Action Unit (CAU) 383, Area 12 E-Tunnel Sites, which is the joint responsibility of DTRA and the U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office (NNSA/NSO). This CADD/CR is consistent with the requirements of the Federal Facility Agreement and Consent Order (FFACO) agreed to by the State of Nevada, the DOE, and the U.S. Department of Defense. Corrective Action Unit 383 is comprised of three Corrective Action Sites (CASs) and two adjacent areas: • CAS 12-06-06, Muckpile • CAS 12-25-02, Oil Spill • CAS 12-28-02, Radioactive Material • Drainage below the Muckpile • Ponds 1, 2, and 3 The purpose of this CADD/CR is to provide justification and documentation to support the recommendation for closure with no further corrective action, by placing use restrictions at the three CASs and two adjacent areas of CAU 383.

Multisensory teamwork: using a tactile or an auditory display to exchange gaze information improves performance in joint visual search.

Science.gov (United States)

Wahn, Basil; Schwandt, Jessika; Krüger, Matti; Crafa, Daina; Nunnendorf, Vanessa; König, Peter

2016-06-01

In joint tasks, adjusting to the actions of others is critical for success. For joint visual search tasks, research has shown that when search partners visually receive information about each other's gaze, they use this information to adjust to each other's actions, resulting in faster search performance. The present study used a visual, a tactile and an auditory display, respectively, to provide search partners with information about each other's gaze. Results showed that search partners performed faster when the gaze information was received via a tactile or auditory display in comparison to receiving it via a visual display or receiving no gaze information. Findings demonstrate the effectiveness of tactile and auditory displays for receiving task-relevant information in joint tasks and are applicable to circumstances in which little or no visual information is available or the visual modality is already taxed with a demanding task such as air-traffic control. Practitioner Summary: The present study demonstrates that tactile and auditory displays are effective for receiving information about actions of others in joint tasks. Findings are either applicable to circumstances in which little or no visual information is available or when the visual modality is already taxed with a demanding task.

The modelling and measurement of super-conducting rock joints

International Nuclear Information System (INIS)

Barton, N.; Makurat, A.; Vik, G.; Loset, F.

1985-01-01

Rock joints exhibiting exceptionally high conductivity have been responsible for severe inflows (10-50 m 3 /min.) and flooding in recent Norwegian tunneling projects. These events may be explained by channeling of flow in partially outwashed mineral fillings, associated with deep weathering in ancient basement rocks. There is also evidence to suggest extensional strain with consistent relationships to regional faulting patterns (Selmer-Olsen 1981). Hydraulic fractures making connection with joint systems that are sheared as a result of increased fluid pressure, has been deduced as the mechanism explaining unusually large fluid losses in the geothermal project in Cornwall, England (Pine and Batchelor, 1984). Such mechanisms also introduce uncertainty into water flood and MHF stimulation treatment of fractured oil and gas reservoirs, particularly when principal stress and joint orientations are poorly understood due to coring and stress measurement problems in weak, overstressed reservoir rocks. The possibility of permanent disposal of nuclear waste in crystalline rock, has also focussed attention on highly conductive (''super-conducting'') joints in nuclear waste programmes in Canada, the USA and in Europe. The bi-modal distributions of joint spacing, continuity, apertures and conductivities resulting from the discovery of super-conducting joints has important implications for the location of planned repositories, due to their dramatic impact on potential transport times. In the laboratory a class of super-conducting joints can be created by shear displacement that causes dilation when shearing non-planar features. Recent biaxial shear testing of rock joints recovered in jointed core has identified a strong coupling of conductivity and shear displacement. The theoretical predictions of constitutive relationships for coupled flow in rock joints (Barton et al. 1985) have been broadly verified

MR diagnosis of temporomandibular joint. A study of joint effusion

International Nuclear Information System (INIS)

Kaneda, Takashi; Yamashiro, Mitsuaki; Ozawa, Kaoru; Suzuki, Hiromi; Okada, Hiroyuki; Yamamoto, Hirotsugu

1998-01-01

The purposes of this study were to evaluate the relationship between correlation of MR joint effusion of the temporomandibular joint and disk position, to evaluate the relationship between joint effusion and aging, and to assess the frequency of MR joint effusion of bilateral temporomandibular joints. The temporomandibular joints of 192 patients with clinical symptoms of temporomandibular joint disorders were imaged bilaterally using high field, surface-coil MR imaging. Oblique sagittal and coronal proton density-weighted and T2-weighted images were obtained. Imaging findings of joint effusion were correlated with disk position, aging, and bilateral temporomandibular joints. MR showed effusion in 4% of the joints with normal superior disk position, 36% of the joints with disk displacement with reduction, and 45% of the joints with disk displacement without reduction. There were significant differences in the incidence of joint effusion between normal disk position and anterior disk displacement with or without reduction. Younger patients less than 40 years were significant higher the incidence of joint effusion than those of older patients. A significant association was seen between joint effusion and aging. MR showed effusion in 17% of the unilateral temporomandibular joint, 24% of the bilateral temporomandibular joints. There was no significant difference between unilateral and bilateral case. These results indicated that joint effusion using MR imaging was associated with varied temporomandibular joint pathologic states. (author)

Grasping the other's attention: The role of animacy in action cueing of joint attention

NARCIS (Netherlands)

Lindemann, O.; Nuku, P.; Rüschemeyer, S.A.; Bekkering, H.

2011-01-01

The current experiment investigates the role of animacy on grasp-cueing effects as investigated in joint attention research. In a simple detection task participants responded to the colour change of one of two objects of identical size. Before the target onset, we presented a cueing stimulus

Correlation between generalized joint hypermobility and hallux valgus

Directory of Open Access Journals (Sweden)

A. A. Kardanov

2015-01-01

Full Text Available Purpose: to evaluate correlation between generalized joint hypermobility, forefoot deformities and elasticity of the first ray of the foot. Material and methods. We examined 138 patients with complaints related with deformities at the forefoot level. During this study the medical history was obtained, the elasticity type of the feet was defined and the degree of motion of the medial metatarsal-cuneiform joint was evaluated. Forefoot elasticity was identified by bringing together the heads I and V metatarsal bones with fingers. If convergence occurred with little resistance, those feet were called hyperelastic. The convergence of the heads I and V metatarsal bones of the foot with an average type of elasticity occurred with resistance. It was impossible to converge the heads of I and V metatarsal bones. Due to the results of weight-bearing and non-weight bearing X-ray, analysis of the main radiographic angles of the foot was performed: between I and V metatarsal bones, between the first and second metatarsal bones and between the first metatarsal bone and proximal phalanx of the great toe. Calculation formula of the forefoot flatness index, showing the average ratios of basic radiographic angles of the foot on the x-ray images (weight-bearing and non-weight bearing was created. An assessment of total joint hypermobility using Beighton scale and evaluation of first ray deformity using DuPont scale were performed. Statistical analysis of obtained data was performed, as a result of which significantly strong correlation between total joint hypermobility, forefoot elasticity and valgus deviation of the great toe were revealed. Results. 11% of the feet were hyperelastic. Calculation of the index of forefoot flatness showed that forefoot flatness wasn’t significant for a rigid foot - 5.6 %, for the feet with an average degree of mobility it was 6.0% and it was expressed for hypemobile feet - 12.3 %. Strong correlation relation between the forefeet

Can NATO's new Very High Readiness Joint Task Force deter?

DEFF Research Database (Denmark)

Rynning, Sten; Ringsmose, Jens

2017-01-01

” a distinct strategic rival – Russia. Chief among the Welsh summit initiatives was the decision to set up a new multinational spearhead force – the Very High Readiness Joint Task Force (VJTF) – as part of an enhanced NATO Response Force (NRF) and within the framework of a so-called Readiness Action Plan (RAP...

Analysis of failure events for expansion joints in nuclear power plants

Energy Technology Data Exchange (ETDEWEB)

Sato, Masahiro [Institute of Nuclear Safety System Inc., Mihama, Fukui (Japan)

2001-09-01

Although a large number of expansion joints are used in nuclear power plants with light water reactors, their failure events have not been paid as much attention as those of vessels and pipes. However, as the operation period of nuclear power plants becomes longer, it is necessary to pay attention to their failure events as well as those of vessels and pipes, because aging problems and latent troubles originated in design or fabrication of expansion joints may appear during their long period operation. In this work, we investigated failure event reports of expansion joints in nuclear power plants both in Japan and in U.S.A. and analyzed (1) the influence to output power level, (2) the position and (3) the cause of each failure. It is revealed that the failure events of expansion joints have continuously occurred, some of which have exerted influence upon power level and have caused fatal or injury accidents of personnel, and hence the importance of corrective actions to prevent the recurrence of such events is pointed out. The importance of countermeasures to the following individual events is also pointed out: (1) corrosion of expansion joints in service water systems, (2) degradation of rubber expansion joints in main condensers, (3) vibration and fatigue of expansion joints in extraction steam lines and (4) transgranular stress corrosion cracking of penetration bellows of containments. (author)

Crystal plasticity finite element analysis of deformation behaviour in SAC305 solder joint

Science.gov (United States)

Darbandi, Payam

Due to the awareness of the potential health hazards associated with the toxicity of lead (Pb), actions have been taken to eliminate or reduce the use of Pb in consumer products. Among those, tin (Sn) solders have been used for the assembly of electronic systems. Anisotropy is of significant importance in all structural metals, but this characteristic is unusually strong in Sn, making Sn based solder joints one of the best examples of the influence of anisotropy. The effect of anisotropy arising from the crystal structure of tin and large grain microstructure on the microstructure and the evolution of constitutive responses of microscale SAC305 solder joints is investigated. Insights into the effects of key microstructural features and dominant plastic deformation mechanisms influencing the measured relative activity of slip systems in SAC305 are obtained from a combination of optical microscopy, orientation imaging microscopy (OIM), slip plane trace analysis and crystal plasticity finite element (CPFE) modeling. Package level SAC305 specimens were subjected to shear deformation in sequential steps and characterized using optical microscopy and OIM to identify the activity of slip systems. X-ray micro Laue diffraction and high energy monochromatic X-ray beam were employed to characterize the joint scale tensile samples to provide necessary information to be able to compare and validate the CPFE model. A CPFE model was developed that can account for relative ease of activating slip systems in SAC305 solder based upon the statistical estimation based on correlation between the critical resolved shear stress and the probability of activating various slip systems. The results from simulations show that the CPFE model developed using the statistical analysis of activity of slip system not only can satisfy the requirements associated with kinematic of plastic deformation in crystal coordinate systems (activity of slip systems) and global coordinate system (shape changes

Recognition and Prediction of Human Actions for Safe Human-Robot Collaboration

DEFF Research Database (Denmark)

Andersen, Rasmus Skovgaard; Bøgh, Simon; Ceballos, Iker

Collaborative industrial robots are creating new opportunities for collaboration between humans and robots in shared workspaces. In order for such collaboration to be efficient, robots - as well as humans - need to have an understanding of the other's intentions and current ongoing action....... In this work, we propose a method for learning, classifying, and predicting actions taken by a human. Our proposed method is based on the human skeleton model from a Kinect. For demonstration of our approach we chose a typical pick-and-place scenario. Therefore, only arms and upper body are considered......; in total 15 joints. Based on trajectories on these joints, different classes of motion are separated using partitioning around medoids (PAM). Subsequently, SVM is used to train the classes to form a library of human motions. The approach allows run-time detection of when a new motion has been initiated...

Defensive Operations in a Decisive Action Training Environment

Science.gov (United States)

2017-07-01

Operations in a Decisive Action Training Environment Christopher L. Vowels W. Anthony Scroggins U.S. Army Research Institute Captain Kyle T...Daniels Master Sergeant Paul M. Volino Joint Readiness Training Center July 2017 Approved for public release; distribution is unlimited...for distribution: MICHELLE SAMS Director Technical review by Dr. William R. Bickley, U.S. Army Research

Multidimensional Recurrence Quantification Analysis (MdRQA) for the Analysis of Multidimensional Time-Series: A Software Implementation in MATLAB and Its Application to Group-Level Data in Joint Action.

Science.gov (United States)

Wallot, Sebastian; Roepstorff, Andreas; Mønster, Dan

2016-01-01

We introduce Multidimensional Recurrence Quantification Analysis (MdRQA) as a tool to analyze multidimensional time-series data. We show how MdRQA can be used to capture the dynamics of high-dimensional signals, and how MdRQA can be used to assess coupling between two or more variables. In particular, we describe applications of the method in research on joint and collective action, as it provides a coherent analysis framework to systematically investigate dynamics at different group levels-from individual dynamics, to dyadic dynamics, up to global group-level of arbitrary size. The Appendix in Supplementary Material contains a software implementation in MATLAB to calculate MdRQA measures.

Unsupervised Learning of Action Primitives

DEFF Research Database (Denmark)

Baby, Sanmohan; Krüger, Volker; Kragic, Danica

2010-01-01

and scale, the use of the object can provide a strong invariant for the detection of motion primitives. In this paper we propose an unsupervised learning approach for action primitives that makes use of the human movements as well as the object state changes. We group actions according to the changes......Action representation is a key issue in imitation learning for humanoids. With the recent finding of mirror neurons there has been a growing interest in expressing actions as a combination meaningful subparts called primitives. Primitives could be thought of as an alphabet for the human actions....... In this paper we observe that human actions and objects can be seen as being intertwined: we can interpret actions from the way the body parts are moving, but as well from how their effect on the involved object. While human movements can look vastly different even under minor changes in location, orientation...

Robotic situational awareness of actions in human teaming

Science.gov (United States)

Tahmoush, Dave

2015-06-01

When robots can sense and interpret the activities of the people they are working with, they become more of a team member and less of just a piece of equipment. This has motivated work on recognizing human actions using existing robotic sensors like short-range ladar imagers. These produce three-dimensional point cloud movies which can be analyzed for structure and motion information. We skeletonize the human point cloud and apply a physics-based velocity correlation scheme to the resulting joint motions. The twenty actions are then recognized using a nearest-neighbors classifier that achieves good accuracy.

Residual and working stresses in pipe joints in heterogeneous metals, due to common action of welding and service loads

International Nuclear Information System (INIS)

Kiselev, S.N.; Voronin, N.N.; Roshchin, V.V.

1978-01-01

The stresses in the welded joints of cylindrical shells are studied, which are caused by the total effect of the thermal deformation welding cycles, by the preheats connected with the thermal treatment or operation, and by power loads. Studied were the shell joints made of the steels Kh18N10T and St.3, as well as the joints of three shells made of different metals, St.3+18N1aT steel+copper. The schematic diagram showing the residual stresses set up under effect of different factors are presented. The following has been shown by the study: the preheating of the welded joints of the shells made of diverse metals up to the operational temperatures does not result in obviating the residual stresses. If the welded shells are loaded by the internal pressure up to the stresses of (0.8-O.9) sigmasub(T), in certain cases an essential (up to 60-70%) reduction in the residual welding stresses may be obtained. The effectiveness of a variation in the residual stresses is reduced in the joints that have been thermally treated after welding. The working stresses set up in the welded joints of the shells made of different metals under the operational loading may be essentially reduced through initial preheating with the application of a pressure or without it. The preheating temperature and the pressures applied may be chosen so that to create the residual strains and the stresses of inverse sign as compared with the working stresses

Autonomy and couples' joint decision-making in healthcare.

Science.gov (United States)

Osamor, Pauline E; Grady, Christine

2018-01-11

Respect for autonomy is a key principle in bioethics. However, respecting autonomy in practice is complex because most people define themselves and make decisions influenced by a complex network of social relationships. The extent to which individual autonomy operates for each partner within the context of decision-making within marital or similar relationships is largely unexplored. This paper explores issues related to decision-making by couples (couples' joint decision-making) for health care and the circumstances under which such a practice should be respected as compatible with autonomous decision-making. We discuss the concept of autonomy as it applies to persons and to actions, human interdependency and gender roles in decision-making, the dynamics and outcomes of couples' joint decision-making, and the ethics of couples' joint decision-making. We believe that the extent to which couples' joint decision-making might be deemed ethically acceptable will vary depending on the context. Given that in many traditional marriages the woman is the less dominant partner, we consider a spectrum of scenarios of couples' joint decision-making about a woman's own health care that move from those that are acceptably autonomous to those that are not consistent with respecting the woman's autonomous decision-making. To the extent that there is evidence that both members of a couple understand a decision, intend it, and that neither completely controls the other, couples' joint decision-making should be viewed as consistent with the principle of respect for the woman's autonomy. At the other end of the spectrum are decisions made by the man without the woman's input, representing domination of one partner by the other. We recommend viewing the dynamics of couples' joint decision-making as existing on a continuum of degrees of autonomy. This continuum-based perspective implies that couples' joint decision-making should not be taken at face value but should be assessed against

Efficient Interaction Recognition through Positive Action Representation

Directory of Open Access Journals (Sweden)

Tao Hu

2013-01-01

Full Text Available This paper proposes a novel approach to decompose two-person interaction into a Positive Action and a Negative Action for more efficient behavior recognition. A Positive Action plays the decisive role in a two-person exchange. Thus, interaction recognition can be simplified to Positive Action-based recognition, focusing on an action representation of just one person. Recently, a new depth sensor has become widely available, the Microsoft Kinect camera, which provides RGB-D data with 3D spatial information for quantitative analysis. However, there are few publicly accessible test datasets using this camera, to assess two-person interaction recognition approaches. Therefore, we created a new dataset with six types of complex human interactions (i.e., named K3HI, including kicking, pointing, punching, pushing, exchanging an object, and shaking hands. Three types of features were extracted for each Positive Action: joint, plane, and velocity features. We used continuous Hidden Markov Models (HMMs to evaluate the Positive Action-based interaction recognition method and the traditional two-person interaction recognition approach with our test dataset. Experimental results showed that the proposed recognition technique is more accurate than the traditional method, shortens the sample training time, and therefore achieves comprehensive superiority.

Exploring social influences on the joint Simon task: Empathy and friendship

Directory of Open Access Journals (Sweden)

Ruth eFord

2015-07-01

Full Text Available Tasks for which people must act together to achieve a goal are a feature of daily life. The present study explored social influences on joint action using a Simon procedure for which participants (n=44 were confronted with a series of images of hands and asked to respond via button press whenever the index finger wore a ring of a certain colour (red or green regardless of pointing direction (left or right. In an initial joint condition they performed the task while sitting next to another person (friend or stranger who responded to the other colour. In a subsequent individual condition they repeated the task on their own; additionally, they completed self-report tests of empathy. Consistent with past research, participants reacted more quickly when the finger pointed towards them rather than their co-actor (the Simon Effect or SE. The effect remained robust when the co-actor was no longer present and was unaffected by degree of acquaintance; however, its magnitude was correlated positively with empathy only among friends. For friends, the SE was predicted by cognitive perspective taking when the co-actor was present and by propensity for fantasizing when the co-actor was absent. We discuss these findings in relation to social accounts (e.g., task co-representation and non-social accounts (e.g., referential coding of joint action.

Plug and play type joints in steel and steel-concrete composite constructions

NARCIS (Netherlands)

Bijlaard, F.S.K.; Brekelmans, J.W.P.M.

2007-01-01

Traditionally for Western Europe countries, joints in steel frame structures are realised using bolts and welds. In the workshop the components are made using welding and drilling of the bolt holes. On site these structural components are connected together using bolts and nuts. The actions on site

EU joint investigation teams: Political ambitions and police practices

NARCIS (Netherlands)

Block, L.; Hufnagel, S.; Harfield, C.; Bronitt, S.

2011-01-01

Since 1997 there exists strong political will in the European Union (EU) to use Joint Investigation Teams (JITs) to foster police cooperation in criminal investigations. For most Member States the legal basis to establish JITs became available in 2004. However, as yet, only around 40 JITs have been

Development of a new modeling technique of 3D S-wave velocity structure for strong ground motion evaluation - Integration of various geophysical and geological data using joint inversion

International Nuclear Information System (INIS)

Sugimoto, Yoshihiro

2014-01-01

A restricted stripe-like zone suffered major damage due to the 1995 Hyogo-ken Nanbu earthquake, and ground motion of the south side of the Kashiwazaki NPP site was much greater than that of the north side in the 2007 Niigata-ken Chuetsu-oki earthquake. One reason for these phenomena is thought to be the focusing effect due to irregularly shaped sedimentary basins (e.g., basin-edge structure, fold structure, etc.) This indicates that precise evaluation of S-wave velocity structure is important. A calculation program that was developed to make S-wave velocity models using the joint inversion method was presented. This program unifies various geophysical and geological data and can make a complex structure model for evaluating strong ground motion with high precision. (author)

The transition to adulthood of young adults with IDD: Parents' joint projects.

Science.gov (United States)

Young, Richard A; Marshall, Sheila K; Stainton, Tim; Wall, Jessie M; Curle, Deirdre; Zhu, Ma; Munro, David; Murray, John; El Bouhali, Asmae; Parada, Filomena; Zaidman-Zait, Anat

2018-03-01

Parents have found the transition to adulthood for their sons or daughters with intellectual and/or developmental disabilities (IDD) particularly challenging. The literature has not examined how parents work together and with others in face of this transition nor has it highlighted parental goals in this process. This study used a perspective based on joint, goal-direct action to describe the projects that Canadian parents engaged in together and with others relative to this transition. Using the qualitative action-project method, joint projects between parents and with others were identified from their conversations and followed for 6 months. Three groups of projects were described: equipping the young adult for adult life, connecting for personal support and managing day-to-day while planning for the future. Parents act together and with others relative to the transition to adulthood of their young adult children with IDD. These projects are complex and differ in goals, steps, resources and emotional regulation and motivation. © 2017 John Wiley & Sons Ltd.

75 FR 30301 - Jurisdictional Separations and Referral to the Federal-State Joint Board

Science.gov (United States)

2010-06-01

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 36 [CC Docket No. 80-286; FCC 10-89] Jurisdictional Separations and Referral to the Federal-State Joint Board AGENCY: Federal Communications Commission. ACTION... relationships and jurisdictional cost allocation factors used in jurisdictional separations. Extending the...

Effect of friction stir lap welding conditions on joint strength of aluminium alloy 6060

International Nuclear Information System (INIS)

Yazdanian, S; Chen, Z W

2009-01-01

Strength of lap joints made by friction stir welding (FSW) depends strongly on how material flows forming the weld nugget zone during FSW and also on how the joint is loaded during testing. Understanding of this processing-property relationship is currently inadequate. In this study, the effects of pin length, welding speed and rotation rate on weld strength using aluminium alloy 6060 were investigated. It has been found that the pin length needed to be slightly greater than the thickness of the sheet for an adequate joint to be established. However, further increase in pin length did not benefit the joint strength. The major factor affecting joint strength has been found to be the rotation speed. An increase in rotation speed resulted in lowering the joint strength. Various modes of fracture have been observed and these modes relate to the degree of hooking and softening. Explanation of how the speed values relate to heat input and material flow and then to the joint strength is given.

Finite element analysis of adanced composite structures containing mechanically fastened joints

International Nuclear Information System (INIS)

Baumann, E.

1982-01-01

Although the usual engineering practice is to ignore joint effects in finite element models of overall structures, there are times when the inclusion of fastener effects in a model is necessary for accurate analysis. This paper describes some simple but accurate methods for accommodating this modeling requirement. The approach involves correlation of test results from a few composite mechanically fastened joints with finite element analyses of joints. It is assumed that if the fastener actions in the test articles can be properly predicted by simple finite element techniques, then these same techniques can be applied to large overall structure models. During the course of this test-analysis effort it was determined that it is possible to obtain correct results for overall structure-joint analyses by using simple modeling concepts provided special care is employed. Also, some emphasis is given in this paper to the importance of properly reducing test data in order to obtain meaningful correlations with finite element analysis. Finally, for those interested, the appendix contains brief descriptions of the test results and failure modes explored in the test program. (orig.)

Stiffness Coefficients of Mortise and Tenon Joints used on Wooden Window Profiles

Directory of Open Access Journals (Sweden)

Milan Podlena

2016-04-01

Full Text Available Samples of corner joints of wooden rectangular windows, with widths of 78 and 92 mm, were used to determine the stiffness of tenon and mortise joints. Two series of samples were loaded statically in the angular plane of compression and tension, so that the bending moment could be derived. The objective of the experiment was to determine the existing correlations between the stiffness in maximum strength and the stiffness in the elastic area for both types of tests. After strength tests were carried out, the annual ring width of the samples was measured to determine whether this factor affects the stiffness of the joints. The results showed that there was a relatively strong correlation between the stiffness in the elastic area and the maximum load. A two-factor analysis of variance confirmed that the type of load did not affect the stiffness of the joint, but the type of joint (width does significantly affect the stiffness. Therefore, the width of annual rings was positively correlated with the stiffness of the joints.

The Joint Action on Health Workforce Planning and Forecasting: Results of a European programme to improve health workforce policies.

Science.gov (United States)

Kroezen, Marieke; Van Hoegaerden, Michel; Batenburg, Ronald

2018-02-01

Health workforce (HWF) planning and forecasting is faced with a number of challenges, most notably a lack of consistent terminology, a lack of data, limited model-, demand-based- and future-based planning, and limited inter-country collaboration. The Joint Action on Health Workforce Planning and Forecasting (JAHWF, 2013-2016) aimed to move forward on the HWF planning process and support countries in tackling the key challenges facing the HWF and HWF planning. This paper synthesizes and discusses the results of the JAHWF. It is shown that the JAHWF has provided important steps towards improved HWF planning and forecasting across Europe, among others through the creation of a minimum data set for HWF planning and the 'Handbook on Health Workforce Planning Methodologies across EU countries'. At the same time, the context-sensitivity of HWF planning was repeatedly noticeable in the application of the tools through pilot- and feasibility studies. Further investments should be made by all actors involved to support and stimulate countries in their HWF efforts, among others by implementing the tools developed by the JAHWF in diverse national and regional contexts. Simultaneously, investments should be made in evaluation to build a more robust evidence base for HWF planning methods. Copyright © 2017 Elsevier B.V. All rights reserved.

Baking together-the coordination of actions in activities involving people with dementia.

Science.gov (United States)

Majlesi, Ali Reza; Ekström, Anna

2016-08-01

This study explores interaction and collaboration between people with dementia and their spouses in relation to the performance of household chores with the focus on instruction as an interactional context to engage the person with dementia in collaboration to accomplish joint activities. Dementia is generally associated with pathological changes in people's cognitive functions such as diminishing memory functions, communicative abilities and also diminishing abilities to take initiative as well as to plan and execute tasks. Using video recordings of everyday naturally occurring activities, we analyze the sequential organization of actions (see Schegloff, 2007) oriented toward the accomplishment of a joint multi-task activity of baking. The analysis shows the specific ways of collaboration through instructional activities in which the person with dementia exhibits his competence and skills in accomplishing the given tasks through negotiating the instructions with his partner and carrying out instructed actions. Although the driving force of the collaboration seems to be a series of directive sequences only initiated by the partner throughout the baking activity, our analyses highlight how the person with dementia can actively use the material environment-including collaborating partners-to compensate for challenges and difficulties encountered in achieving everyday tasks. The sequential organization of instructions and instructed actions are in this sense argued to provide an interactional environment wherein the person with dementia can make contributions to the joint activity in an efficient way. While a collaborator has been described as necessary for a person with dementia to be able to partake in activities, this study shows that people with dementia are not only guided by their collaborators in joint activities but they can also actively use their collaborators in intricate compensatory ways. Copyright © 2016 Elsevier Inc. All rights reserved.

Statistical learning of action: the role of conditional probability.

Science.gov (United States)

Meyer, Meredith; Baldwin, Dare

2011-12-01

Identification of distinct units within a continuous flow of human action is fundamental to action processing. Such segmentation may rest in part on statistical learning. In a series of four experiments, we examined what types of statistics people can use to segment a continuous stream involving many brief, goal-directed action elements. The results of Experiment 1 showed no evidence for sensitivity to conditional probability, whereas Experiment 2 displayed learning based on joint probability. In Experiment 3, we demonstrated that additional exposure to the input failed to engender sensitivity to conditional probability. However, the results of Experiment 4 showed that a subset of adults-namely, those more successful at identifying actions that had been seen more frequently than comparison sequences-were also successful at learning conditional-probability statistics. These experiments help to clarify the mechanisms subserving processing of intentional action, and they highlight important differences from, as well as similarities to, prior studies of statistical learning in other domains, including language.

Scalable Joint Models for Reliable Uncertainty-Aware Event Prediction.

Science.gov (United States)

Soleimani, Hossein; Hensman, James; Saria, Suchi

2017-08-21

Missing data and noisy observations pose significant challenges for reliably predicting events from irregularly sampled multivariate time series (longitudinal) data. Imputation methods, which are typically used for completing the data prior to event prediction, lack a principled mechanism to account for the uncertainty due to missingness. Alternatively, state-of-the-art joint modeling techniques can be used for jointly modeling the longitudinal and event data and compute event probabilities conditioned on the longitudinal observations. These approaches, however, make strong parametric assumptions and do not easily scale to multivariate signals with many observations. Our proposed approach consists of several key innovations. First, we develop a flexible and scalable joint model based upon sparse multiple-output Gaussian processes. Unlike state-of-the-art joint models, the proposed model can explain highly challenging structure including non-Gaussian noise while scaling to large data. Second, we derive an optimal policy for predicting events using the distribution of the event occurrence estimated by the joint model. The derived policy trades-off the cost of a delayed detection versus incorrect assessments and abstains from making decisions when the estimated event probability does not satisfy the derived confidence criteria. Experiments on a large dataset show that the proposed framework significantly outperforms state-of-the-art techniques in event prediction.

76 FR 30840 - Jurisdictional Separations and Referral to the Federal-State Joint Board

Science.gov (United States)

2011-05-27

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 36 [CC Docket No. 80-286; FCC 11-71] Jurisdictional Separations and Referral to the Federal-State Joint Board AGENCY: Federal Communications Commission. ACTION... this document, the Commission extends the current freeze of part 36 category relationships and...

77 FR 30410 - Jurisdictional Separations and Referral to the Federal-State Joint Board

Science.gov (United States)

2012-05-23

... FEDERAL COMMUNICATIONS COMMISSION 47 CFR Part 36 [CC Docket No. 80-286; FCC 12-49] Jurisdictional Separations and Referral to the Federal-State Joint Board AGENCY: Federal Communications Commission. ACTION... this document, the Commission extends the current freeze of part 36 category relationships and...

The morphological characteristics of the antebrachiocarpal joint of the cheetah (Acinonyx jubatus).

Science.gov (United States)

Ohale, L O C; Groenewald, H B

2003-03-01

A morphological study of the structures of the antebrachiocarpal (AC) joint of the cheetah was carded out by dissection of eight forelimbs obtained from four adult cheetahs culled from the Kruger National Park, Republic of South Africa. The aim was to evaluate the deviations of this joint from the normal feline pattern and to consider their possible relationship to the cheetah's adaptation to speed. Although published data on the AC joint of the other felids show general resemblance to that of the cheetah, there are nevertheless slight, but significant variations and modifications which tend to suggest adaptation to speed. The shafts of the radius and ulna of the cheetah are relatively straight and slender, with poorly developed distal ends. The ulnar notch is reduced to a very shallow concavity while the corresponding ulnar facet is a barely noticeable convexity, separated from the distal ulnar articular facet by an ill-defined groove. The movement of the distal radio-ulnar joint is highly restricted by the presence of a fibro-cartilaginous structure and a strong interrosseous membrane, limiting pronation and supination normally achieved by the rotation of the radius around the ulna. The extensor grooves at the distal extremity of the radius are deep and narrow and are guarded by prominent ridges. A thick extensor retinaculum anchors the strong extensor tendons in these grooves. The distal articular surface of the radius is concave in all directions except at the point where it moves into its stylold process. At this point it is convex in the dorsopalmar direction, with a surface that is rather deep and narrow. The proximal row of carpal bones presents a strongly convex surface, which is more pronounced in the dorsopalmar direction with the greatest convexity on the lateral aspect. Medially, there is a ridge-like concavity across the base of the tubercle, which rocks on the flexor surface of the radius, limiting excessive flexion as well as restricting lateral

Dynamic characteristics analysis of deployable space structures considering joint clearance

Science.gov (United States)

Li, Tuanjie; Guo, Jian; Cao, Yuyan

2011-04-01

The clearance in joints influences the dynamic stability and the performance of deployable space structures (DSS). A virtual experimental modal analysis (VEMA) method is proposed to deal with the effects of joint clearance and link flexibility on the dynamic characteristics of the DSS in this paper. The focus is on the finite element modeling of the clearance joint, VEMA and the modal parameters identification of the DSS. The finite element models (FEM) of the clearance joint and the deployable structure are established in ANSYS. The transient dynamic analysis is conducted to provide the time history data of excitation and response for the VEMA. The fast Fourier transform (FFT) technique is used to transform the data from time domain to frequency domain. The frequency response function is calculated to identify the modal parameters of the deployable structure. Experimental verification is provided to indicate the VEMA method is both a cost and time efficient approach to obtain the dynamic characteristics of the DSS. Finally, we analyze the effects of clearance size and gravity on the dynamic characteristics of the DSS. The analysis results indicate that the joint clearance and gravity strongly influence the dynamic characteristics of the DSS.

75 FR 56651 - ITS Joint Program Office; Trucking Industry Mobility & Technology Coalition Annual Meeting

Science.gov (United States)

2010-09-16

... DEPARTMENT OF TRANSPORTATION ITS Joint Program Office; Trucking Industry Mobility & Technology... Transportation. ACTION: Notice. The Trucking Industry Mobility & Technology Coalition (TIMTC) Annual [[Page 56652...: Beating Gridlock with a Smart Grid; U.S. DOT Truck Technology Initiatives; and State and Federal...

Compression-rate-dependent nonlinear mechanics of normal and impaired porcine knee joints.

Science.gov (United States)

Rodriguez, Marcel Leonardo; Li, LePing

2017-11-14

The knee joint performs mechanical functions with various loading and unloading processes. Past studies have focused on the kinematics and elastic response of the joint with less understanding of the rate-dependent load response associated with viscoelastic and poromechanical behaviors. Forty-five fresh porcine knee joints were used in the present study to determine the loading-rate-dependent force-compression relationship, creep and relaxation of normal, dehydrated and meniscectomized joints. The mechanical tests of all normal intact joints showed similar strong compression-rate-dependent behavior: for a given compression-magnitude up to 1.2 mm, the reaction force varied 6 times over compression rates. While the static response was essentially linear, the nonlinear behavior was boosted with the increased compression rate to approach the asymptote or limit at approximately 2 mm/s. On the other hand, the joint stiffness varied approximately 3 times over different joints, when accounting for the maturity and breed of the animals. Both a loss of joint hydration and a total meniscectomy greatly compromised the load support in the joint, resulting in a reduction of load support as much as 60% from the corresponding intact joint. However, the former only weakened the transient load support, but the latter also greatly weakened the equilibrium load support. A total meniscectomy did not diminish the compression-rate-dependence of the joint though. These findings are consistent with the fluid-pressurization loading mechanism, which may have a significant implication in the joint mechanical function and cartilage mechanobiology.

Investigating a Potential Auxin-Related Mode of Hormetic/Inhibitory Action of the Phytotoxin Parthenin.

Science.gov (United States)

Belz, Regina G

2016-01-01

Parthenin is a metabolite of Parthenium hysterophorus and is believed to contribute to the weed's invasiveness via allelopathy. Despite the potential of parthenin to suppress competitors, low doses stimulate plant growth. This biphasic action was hypothesized to be auxin-like and, therefore, an auxin-related mode of parthenin action was investigated using two approaches: joint action experiments with Lactuca sativa, and dose-response experiments with auxin/antiauxin-resistant Arabidopsis thaliana genotypes. The joint action approach comprised binary mixtures of subinhibitory doses of the auxin 3-indoleacetic acid (IAA) mixed with parthenin or one of three reference compounds [indole-3-butyric acid (IBA), 2,3,5-triiodobenzoic acid (TIBA), 2-(p-chlorophenoxy)-2-methylpropionic acid (PCIB)]. The reference compounds significantly interacted with IAA at all doses, but parthenin interacted only at low doses indicating that parthenin hormesis may be auxin-related, in contrast to its inhibitory action. The genetic approach investigated the response of four auxin/antiauxin-resistant mutants and a wildtype to parthenin or two reference compounds (IAA, PCIB). The responses of mutant plants to the reference compounds confirmed previous reports, but differed from the responses observed for parthenin. Parthenin stimulated and inhibited all mutants independent of resistance. This provided no indication for an auxin-related action of parthenin. Therefore, the hypothesis of an auxin-related inhibitory action of parthenin was rejected in two independent experimental approaches, while the hypothesis of an auxin-related stimulatory effect could not be rejected.

Corrective Action Investigation Plan for Corrective Action Unit 139: Waste Disposal Sites, Nevada Test Site, Nevada

International Nuclear Information System (INIS)

Grant Evenson

2006-01-01

Corrective Action Unit (CAU) 139 is located in Areas 3, 4, 6, and 9 of the Nevada Test Site, which is 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 139 is comprised of the seven corrective action sites (CASs) listed below: (1) 03-35-01, Burn Pit; (2) 04-08-02, Waste Disposal Site; (3) 04-99-01, Contaminated Surface Debris; (4) 06-19-02, Waste Disposal Site/Burn Pit; (5) 06-19-03, Waste Disposal Trenches; (6) 09-23-01, Area 9 Gravel Gertie; and (7) 09-34-01, Underground Detection Station. These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives with the exception of CASs 09-23-01 and 09-34-01. Regarding these two CASs, CAS 09-23-01 is a gravel gertie where a zero-yield test was conducted with all contamination confined to below ground within the area of the structure, and CAS 09-34-01 is an underground detection station where no contaminants are present. Additional information will be obtained by conducting a corrective action investigation (CAI) before evaluating corrective action alternatives and selecting the appropriate corrective action for the other five CASs where information is insufficient. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. The sites will be investigated based on the data quality objectives (DQOs) developed on January 4, 2006, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture; and Bechtel Nevada. The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 139

Technology transfer in Activities Implemented Jointly (AIJ)

Energy Technology Data Exchange (ETDEWEB)

Usher, P.E.O. [United Nations Environment Programme (Cayman Islands)

1998-08-01

The agreed objective of the United Nations Framework Convention on Climate Change is to bring about early and significant reductions in greenhouse gas emissions. For many, the most attractive option for promoting this end is joint implementation. Indivisible from this is the transfer of current and innovative technology, though technology transfer is not conditional on joint implementation. The somewhat ad hoc nature of Activities Implemented Jointly (AIJ) and the failure to establish ground rules at the outset is considered. Common action can contribute to cost-effective mitigation of climate change through a sharing of the costs, benefits and risks of R and D, cross fertilisation of ideas among countries, economies of scale for new technologies, and clear signals to the international market. Potential problems include: the reluctance of national private industry to share proprietary information which might compromise competitiveness; premature convergence on technical standards that might inhibit the emergence of more developed technology; specific national circumstances which mean that solutions satisfactory to others are inappropriate in its case. This latter issue is of particular relevance to developing countries. AIJ needs to be approached in a systematic way taking into account lessons learned from evaluating the pilot phase if it is to be seen to be working effectively. (UK)

Impact of mechanism vibration characteristics by joint clearance and optimization design of its multi-objective robustness

Science.gov (United States)

Zeng, Baoping; Wang, Chao; Zhang, Yu; Gong, Yajun; Hu, Sanbao

2017-12-01

Joint clearances and friction characteristics significantly influence the mechanism vibration characteristics; for example: as for joint clearances, the shaft and bearing of its clearance joint collide to bring about the dynamic normal contact force and tangential coulomb friction force while the mechanism works; thus, the whole system may vibrate; moreover, the mechanism is under contact-impact with impact force constraint from free movement under action of the above dynamic forces; in addition, the mechanism topology structure also changes. The constraint relationship between joints may be established by a repeated complex nonlinear dynamic process (idle stroke - contact-impact - elastic compression - rebound - impact relief - idle stroke movement - contact-impact). Analysis of vibration characteristics of joint parts is still a challenging open task by far. The dynamic equations for any mechanism with clearance is often a set of strong coupling, high-dimensional and complex time-varying nonlinear differential equations which are solved very difficultly. Moreover, complicated chaotic motions very sensitive to initial values in impact and vibration due to clearance let high-precision simulation and prediction of their dynamic behaviors be more difficult; on the other hand, their subsequent wearing necessarily leads to some certain fluctuation of structure clearance parameters, which acts as one primary factor for vibration of the mechanical system. A dynamic model was established to the device for opening the deepwater robot cabin door with joint clearance by utilizing the finite element method and analysis was carried out to its vibration characteristics in this study. Moreover, its response model was carried out by utilizing the DOE method and then the robust optimization design was performed to sizes of the joint clearance and the friction coefficient change range so that the optimization design results may be regarded as reference data for selecting bearings

Determination of Parachute Joint Factors using Seam and Joint Testing

Science.gov (United States)

Mollmann, Catherine

2015-01-01

This paper details the methodology for determining the joint factor for all parachute components. This method has been successfully implemented on the Capsule Parachute Assembly System (CPAS) for the NASA Orion crew module for use in determining the margin of safety for each component under peak loads. Also discussed are concepts behind the joint factor and what drives the loss of material strength at joints. The joint factor is defined as a "loss in joint strength...relative to the basic material strength" that occurs when "textiles are connected to each other or to metals." During the CPAS engineering development phase, a conservative joint factor of 0.80 was assumed for each parachute component. In order to refine this factor and eliminate excess conservatism, a seam and joint testing program was implemented as part of the structural validation. This method split each of the parachute structural joints into discrete tensile tests designed to duplicate the loading of each joint. Breaking strength data collected from destructive pull testing was then used to calculate the joint factor in the form of an efficiency. Joint efficiency is the percentage of the base material strength that remains after degradation due to sewing or interaction with other components; it is used interchangeably with joint factor in this paper. Parachute materials vary in type-mainly cord, tape, webbing, and cloth -which require different test fixtures and joint sample construction methods. This paper defines guidelines for designing and testing samples based on materials and test goals. Using the test methodology and analysis approach detailed in this paper, the minimum joint factor for each parachute component can be formulated. The joint factors can then be used to calculate the design factor and margin of safety for that component, a critical part of the design verification process.

The effects of rock joint geometrical parameters on safety of concrete arch dam abutments

Energy Technology Data Exchange (ETDEWEB)

Yazdani, S.; Yazdani, M.; Joorabchi, A.E. [Tarbiat Modares Univ., Tehran (Iran, Islamic Republic of)

2007-07-01

The International Commission on Large Dams (ICOLD) has stated that foundation failure is the primary cause of dam failure following overtopping. As such, concrete arch dams require strong and stiff abutments. The failure of jointed rock mass at abutments is one of the key mechanisms that may lead to uncontrolled leakage. For that reason, this study investigated the affect of the joint geometrical parameters on the stability of the concrete arch dam abutments. The study also considered the role of joints on the behaviour mechanism of rock mass because it is governed by mechanical and hydraulic properties. The orientation of joints was considered since kinematic conditions are needed for a block to move. The hydromechanical influence of joint apertures on the stability of the foundation was also investigated through nonlinear analyses of different joint orientations and apertures on a hypothetical jointed abutment. Dam abutment safety was estimated by finding the values of maximum sliding and maximum opening and determining the water flow along discontinuities. The values of these 3 indices were derived for different orientations of joints. It was concluded that abutment safety was highly dependent on the geometrical characteristics of joints. 8 refs., 1 tab., 6 figs.

Motion coordination affects movement parameters in a joint pick-and-place task

DEFF Research Database (Denmark)

Vesper, Cordula; Soutschek, Alexander; Schubö, Anna

2009-01-01

This study examined influences of social context on movement parameters in a pick-and-place task. Participants’ motion trajectories were recorded while they performed sequences of natural movements either working side-by-side with a partner or alone. It was expected that movement parameters would...... person performed the task while being observed by the partner. Results indicate that participants adapted their movements temporally and spatially to the joint action situation: Overall movement duration was shorter, and mean and maximum velocity was higher when actually working together than when...... action tasks....

Temporomandibular joint space in children without joint disease

International Nuclear Information System (INIS)

Larheim, T.A.

1981-01-01

Bilateral assessment of the temporomandibular joint space in children without joint disease is reported. Twenty-eight children were examined with conventional radiography and 23 with tomography. High prevalence of asymmetric joint spaces with both techniques indicated that great care should be taken when using narrowing or widening of the joint space as a diagnostic criterion in children with juvenile rheumatoid arthritis. Other signs, such as restricted translation of the mandibular head, and clinical symptoms should be evaluated. (Auth.)

The return of moral motivation in predicting collective action against collective disadvantage

NARCIS (Netherlands)

Van Zomeren, M.; Postmes, T.; Spears, R.

The social psychology of collective action against collective disadvantage has hitherto underspecified, not to say neglected, the profound power of moral motivations. This is particularly important because moral motivations can unite disadvantaged and advantaged group members to fight for a joint

Influence of friction stir welding parameters on properties of 2024 T3 aluminium alloy joints

Directory of Open Access Journals (Sweden)

Eramah Abdsalam M.

2014-01-01

Full Text Available The aim of this work is to analyse the process of friction stir welding (FSW of 3mm thick aluminium plates made of high strength aluminium alloy - 2024 T3, as well as to assess the mechanical properties of the produced joints. FSW is a modern procedure which enables joining of similar and dissimilar materials in the solid state, by the combined action of heat and mechanical work. This paper presents an analysis of the experimental results obtained by testing the butt welded joints. Tensile strength of the produced joints is assessed, as well as the distribution of hardness, micro-and macrostructure through the joints (in the base material, nugget, heat affected zone and thermo-mechanically affected zone. Different combinations of the tool rotation speed and the welding speed are used, and the dependence of the properties of the joints on these parameters of welding technology is determined. [Projekat Ministarstva nauke Republike Srbije, br. TR 34018 i br. TR 35006

Let’s Get Counterinsurgency Right: Collective Action Theory in Joint Publication 3-24

Science.gov (United States)

2015-04-01

sell the weapons and pocket profits.73 Taliban members who experience fair sharing of expensive weapons are more likely to increase participation...Defense. (8 November 2010 (As Amended Through15 January 2015)). Joint Publication 1-02: Department of Defense Dictionary of Military and Associated...Warfare: A French View of Counterinsurgency ( English Translation). United States of America, KS: Frederick A. Praeger, Inc. Trives, S. (2009). Roots of

Mining Key Skeleton Poses with Latent SVM for Action Recognition

Directory of Open Access Journals (Sweden)

Xiaoqiang Li

2017-01-01

Full Text Available Human action recognition based on 3D skeleton has become an active research field in recent years with the recently developed commodity depth sensors. Most published methods analyze an entire 3D depth data, construct mid-level part representations, or use trajectory descriptor of spatial-temporal interest point for recognizing human activities. Unlike previous work, a novel and simple action representation is proposed in this paper which models the action as a sequence of inconsecutive and discriminative skeleton poses, named as key skeleton poses. The pairwise relative positions of skeleton joints are used as feature of the skeleton poses which are mined with the aid of the latent support vector machine (latent SVM. The advantage of our method is resisting against intraclass variation such as noise and large nonlinear temporal deformation of human action. We evaluate the proposed approach on three benchmark action datasets captured by Kinect devices: MSR Action 3D dataset, UTKinect Action dataset, and Florence 3D Action dataset. The detailed experimental results demonstrate that the proposed approach achieves superior performance to the state-of-the-art skeleton-based action recognition methods.

Attention, biological motion, and action recognition.

Science.gov (United States)

Thompson, James; Parasuraman, Raja

2012-01-02

Interacting with others in the environment requires that we perceive and recognize their movements and actions. Neuroimaging and neuropsychological studies have indicated that a number of brain regions, particularly the superior temporal sulcus, are involved in a number of processes essential for action recognition, including the processing of biological motion and processing the intentions of actions. We review the behavioral and neuroimaging evidence suggesting that while some aspects of action recognition might be rapid and effective, they are not necessarily automatic. Attention is particularly important when visual information about actions is degraded or ambiguous, or if competing information is present. We present evidence indicating that neural responses associated with the processing of biological motion are strongly modulated by attention. In addition, behavioral and neuroimaging evidence shows that drawing inferences from the actions of others is attentionally demanding. The role of attention in action observation has implications for everyday social interactions and workplace applications that depend on observing, understanding and interpreting actions. Published by Elsevier Inc.

Potential of optical spectral transmission measurements for joint inflammation measurements in rheumatoid arthritis patients

Science.gov (United States)

Meier, A. J. Louise; Rensen, Wouter H. J.; de Bokx, Pieter K.; de Nijs, Ron N. J.

2012-08-01

Frequent monitoring of rheumatoid arthritis (RA) patients enables timely treatment adjustments and improved outcomes. Currently this is not feasible due to a shortage of rheumatologists. An optical spectral transmission device is presented for objective assessment of joint inflammation in RA patients, while improving diagnostic accuracy and clinical workflow. A cross-sectional, nonrandomized observational study was performed with this device. In the study, 77 proximal interphalangeal (PIP) joints in 67 patients have been analyzed. Inflammation of these PIP joints was also assessed by a rheumatologist with a score varying from 1 (not inflamed) to 5 (severely inflamed). Out of 77 measurements, 27 were performed in moderate to strongly inflamed PIP joints. Comparison between the clinical assessment and an optical measurement showed a correlation coefficient r=0.63, p<0.001, 95% CI [0.47, 0.75], and a ROC curve (AUC=0.88) that shows a relative good specificity and sensitivity. Optical spectral transmission measurements in a single joint correlate with clinical assessment of joint inflammation, and therefore might be useful in monitoring joint inflammation in RA patients.

Affirmative Action and Stereotype Threat

OpenAIRE

Cohen, Alma

2015-01-01

This paper provides experimental evidence on the effect of affirmative action (AA). In particular, we investigate whether affirmative action has a ”stereotype threat effect” – that is, whether AA cues a negative stereotype that leads individuals to conform to the stereotype and adversely affects their performance. Stereotype threat has been shown in the literature to be potentially significant for individuals who identify strongly with the domain of the stereotype and who engage in complex st...

Functional differentiation of macaque visual temporal cortical neurons using a parametric action space.

Science.gov (United States)

Vangeneugden, Joris; Pollick, Frank; Vogels, Rufin

2009-03-01

Neurons in the rostral superior temporal sulcus (STS) are responsive to displays of body movements. We employed a parametric action space to determine how similarities among actions are represented by visual temporal neurons and how form and motion information contributes to their responses. The stimulus space consisted of a stick-plus-point-light figure performing arm actions and their blends. Multidimensional scaling showed that the responses of temporal neurons represented the ordinal similarity between these actions. Further tests distinguished neurons responding equally strongly to static presentations and to actions ("snapshot" neurons), from those responding much less strongly to static presentations, but responding well when motion was present ("motion" neurons). The "motion" neurons were predominantly found in the upper bank/fundus of the STS, and "snapshot" neurons in the lower bank of the STS and inferior temporal convexity. Most "motion" neurons showed strong response modulation during the course of an action, thus responding to action kinematics. "Motion" neurons displayed a greater average selectivity for these simple arm actions than did "snapshot" neurons. We suggest that the "motion" neurons code for visual kinematics, whereas the "snapshot" neurons code for form/posture, and that both can contribute to action recognition, in agreement with computation models of action recognition.

Joint stress of chlorimuron-ethyl and cadmium on wheat Triticum aestivum at biochemical levels

International Nuclear Information System (INIS)

Wang, M.-E; Zhou, Q.-X.

2006-01-01

Biochemical responses to joint stress of chlorimuron-ethyl and cadmium (Cd) in wheat Triticum aestivum were examined. The joint action of chlorimuron-ethyl and Cd weakened the inhibition of Cd or chlorimuron-ethyl on the formation of chlorophyll. It was deduced that wheat plants had the capability to protect themselves by increasing the activity of the antioxidant enzyme peroxidase (POD) with the exposure time. The joint effect of chlorimuron-ethyl and Cd on the superoxide dismutase (SOD) activity in leaves was additive, while the joint effect on the SOD activity in roots was determined by the interaction of chlorimuron-ethyl and Cd in wheat. It was also concluded that the change of malondialdehyde (MDA) content in wheat might not be a good biomarker in the oxidative damage by chlorimuron-ethyl, while a decrease in the soluble protein content and POD activity in roots could be considered as a biomarker in the damage of wheat by chlorimuron-ethyl and Cd. - Soluble protein content and peroxidase activity in seedlings were the biomarkers indicating joint stress of chemicals

Mechanical characterization and force-displacement hysteretic curves from in-plane cyclic tests on strong masonry infills.

Science.gov (United States)

Morandi, Paolo; Hak, Sanja; Magenes, Guido

2018-02-01

This article contains information related to a recent study "Performance-based interpretation of in-plane cyclic tests on RC frames with strong masonry infills" (Morandi et al., 2017 [1]). Motivated by the necessity to improve the knowledge of the in-plane seismic response of rigid strong masonry infills, a wide experimental campaign based on in-plane cyclic tests on full-scale RC infilled frame specimens, supplemented with a complete characterization of the materials, has been conducted at the laboratory of the Department of Civil Engineering and Architecture of the University of Pavia. The masonry is constituted by vertically perforated 35 cm thick clay units with tongue and groove and dry head-joints and general-purpose mortar bed-joints. The paper reports the results of the mechanical characterization and of the force-displacement hysteretic curves from the in-plane cyclic tests.

Chemical Compositions of Ligusticum chuanxiong Oil and Lemongrass Oil and Their Joint Action against Aphis citricola Van Der Goot (Hemiptera: Aphididae).

Science.gov (United States)

Zhang, Chao; Liu, Runqiang; He, Jun; Ma, Zhiqing; Zhang, Xing

2016-10-12

In order to develop novel botanical insecticides, the joint action of Ligusticum chuanxiong oil (LCO) and lemongrass oil (LO) against Aphis citricola van der Goot was determined systematically indoors and outdoors. The chemical profiles of LCO and LO as determined by gas chromatography-mass spectrometry (GC-MS) analysis revealed that the main compounds from LCO were ( Z )-ligustilide (44.58%) and senkyunolide A (26.92%), and that of LO were geranial (42.16%) and neral (32.58%), respectively. The mixture of LCO and LO showed significant synergy against A. citricola , with a common-toxicity coefficient (CTC) value of 221.46 at the optimal ratio of LCO to LO (4:1, w : w ). Based on the results of solvents and emulsifiers screening, L. chuanxiong oil·Lemongrass oil 20% emulsifiable concentrate (20% LCO·LO EC) was developed, and its stability was confirmed with tests of cold and thermal storage. Field trials indicated that the insecticidal activity of the diluted 20% LCO·LO EC (1000 fold dilution) was comparable to conventional pesticide (20% imidacloprid EC) on A. citricola seven days after application. Thus, the mixture of LCO and LO has the potential to be further developed as a botanical pesticide.

Joint Replacement (Finger and Wrist Joints)

Science.gov (United States)

... All Topics A-Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is a Hand Therapist? Media Find a Hand Surgeon Home Anatomy Joint Replacement Email to a friend * required fields ...

Joint Operation Planning

National Research Council Canada - National Science Library

2006-01-01

.... It sets forth joint doctrine to govern the joint operation planning activities and performance of the Armed Forces of the United States in joint operations, and provides the joint doctrinal basis...

Jointness for the Rest of Us: Reforming Joint Professional Development

Science.gov (United States)

2016-06-10

transferred to the Joint Staff. 13 DOD’s instinct to “overly centralize planning, organization, and management.”20 The authors contend that this...2. 3 John F. Schank and others, Who is Joint? Reevaluating the Joint Duty Assignment List : A Study Prepared for the Joint Staff, by the RAND...and code those billets as such. Once identified, DOD must expand the Joint Duty Assignment List (JDAL) to include billets that offer enlisted personnel

Periprosthetic joint infection: are patients with multiple prosthetic joints at risk?

Science.gov (United States)

Jafari, S Mehdi; Casper, David S; Restrepo, Camilo; Zmistowski, Benjamin; Parvizi, Javad; Sharkey, Peter F

2012-06-01

Patients who present with a periprosthetic joint infection in a single joint may have multiple prosthetic joints. The risk of these patients developing a subsequent infection in another prosthetic joint is unknown. Our purposes were (1) to identify the risk of developing a subsequent infection in another prosthetic joint and (2) to describe the time span and organism profile to the second prosthetic infection. We retrospectively identified 55 patients with periprosthetic joint infection who had another prosthetic joint in place at the time of presentation. Of the 55 patients, 11 (20%) developed a periprosthetic joint infection in a second joint. The type of organism was the same as the first infection in 4 (36%) of 11 patients. The time to developing a second infection averaged 2.0 years (range, 0-6.9 years). Copyright © 2012 Elsevier Inc. All rights reserved.

Joint attention and oromotor abilities in young children with and without autism spectrum disorder.

Science.gov (United States)

Dalton, Jennifer C; Crais, Elizabeth R; Velleman, Shelley L

2017-09-01

This study examined the relationship between joint attention ability and oromotor imitation skill in three groups of young children with and without Autism Spectrum Disorder using both nonverbal oral and verbal motor imitation tasks. Research questions addressed a) differences among joint attention and oromotor imitation abilities; b) the relationship between independently measured joint attention and oromotor imitation, both nonverbal oral and verbal motor; c) the relationships between joint attention and verbal motor imitation during interpersonal interaction; and d) the relationship between the sensory input demands (auditory, visual, and tactile) and oromotor imitation, both nonverbal oral and verbal motor. A descriptive, nonexperimental design was used to compare joint attention and oromotor skills of 10 preschool-aged children with ASD, with those of two control groups: 6 typically developing children (TD), and 6 children with suspected Childhood Apraxia of Speech (sCAS) or apraxic-like symptoms. All children had at least a 3.0 mean length utterance. Children with ASD had poorer joint attention skills overall than children with sCAS or typically developing children. Typically developing children demonstrated higher verbal motor imitation skills overall compared to children with sCAS. Correlational analyses revealed that nonverbal oral imitation and verbal motor imitation were positively related to joint attention abilities only in the children with ASD. Strong positive relationships between joint attention in a naturalistic context (e.g., shared story experience) and oromotor imitation skills, both nonverbal oral and verbal motor, were found only for children with ASD. These data suggest there is a strong positive relationship between joint attention skills and the ability to sequence nonverbal oral and verbal motor movements in children with ASD. The combined sensory input approach involving auditory, visual, and tactile modalities contributed to

Coracoclavicular joint

Energy Technology Data Exchange (ETDEWEB)

Kim, Kun Sang; Park, Chan Il; Ahn, Jae Doo; Lim, Chong Won [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1970-10-15

The coracoclvicular joint, a rear abnormality which may be the cause of pain in the shoulder and limitation of motion of the shoulder joint, is discussed. A case of coracoclvicular joint with shoulder pain was observed in 65 yrs old Korean male.

Temporomandibular joint

International Nuclear Information System (INIS)

Westesson, P.L.; Hatala, M.; Tallents, R.H.; Katzberg, R.W.; Musgrave, M.; Levitt, S.

1990-01-01

This paper determines the frequency of MR signs of abnormal temporomandibular joints (TMJs) in asymptomatic volunteers. Forty-two volunteers with 84 clinically normal TMJs were imaged in the sagittal and coronal planes with surface coil MR imaging. Sagittal closed and open and coronal closed views were obtained bilaterally in all volunteers. The images were classified as normal (superior disk position) or abnormal (disk displacement of degenerative joint disease). Eighteen joints in 11 volunteers were abnormal; 12 had disk displacement with reduction and six had disk displacement without reduction, with associated degenerative joint disease in three of the six. Asymptomatic internal derangement and degenerative joint disease occur in about one-fourth of asymptomatic volunteers

Understanding the Impact of Expertise in Joint and Solo-Improvisation.

Science.gov (United States)

Issartel, Johann; Gueugnon, Mathieu; Marin, Ludovic

2017-01-01

Joint-improvisation is not only an open-ended creative action that two or more people perform together in the context of an artistic performance (e.g., theatre, music or dance). Joint-improvisation also takes place in daily life activities when humans take part in collective performance such as toddlers at play or adults engaged in a conversation. In the context of this article, joint-improvisation has been looked at from a social motor coordination perspective. In the literature, the nature of the social motor coordination characteristics of joint-improvisation for either the creative aspect or daily life features of this motor performance remains unclear. Additionally, both solo-improvisation and joint-improvisation need to be studied conjointly to establish the influence of the social element of improvisation in the emergence of multi-agent motor coordination. In order to better understand those two types of improvisation, we compared three level of expertise - novice, intermediate and professional in dance improvisation to identify movement characteristics for each of the groups. Pairs of the same level were asked to improvise together. Each individual was also asked to perform an improvisation on his/her own. We found that each of the three groups present specific movement organization with movement complexity increasing with the level of expertise. Experts performed shorter movement duration in conjunction with an increase range of movement. The direct comparison of individual and paired Conditions highlighted that the joint-improvisation reduced the complexity of the movement organization and those for all three levels while maintaining the differences between the groups. This direct comparison amongst those three distinct groups provides an original insight onto the nature of movement patterns in joint-improvisation situation. Overall, it reveals the role of both individual and collective properties in the emergence of social coordination.

Understanding the Impact of Expertise in Joint and Solo-Improvisation

Directory of Open Access Journals (Sweden)

Johann Issartel

2017-06-01

Full Text Available Joint-improvisation is not only an open-ended creative action that two or more people perform together in the context of an artistic performance (e.g., theatre, music or dance. Joint-improvisation also takes place in daily life activities when humans take part in collective performance such as toddlers at play or adults engaged in a conversation. In the context of this article, joint-improvisation has been looked at from a social motor coordination perspective. In the literature, the nature of the social motor coordination characteristics of joint-improvisation for either the creative aspect or daily life features of this motor performance remains unclear. Additionally, both solo-improvisation and joint-improvisation need to be studied conjointly to establish the influence of the social element of improvisation in the emergence of multi-agent motor coordination. In order to better understand those two types of improvisation, we compared three level of expertise – novice, intermediate and professional in dance improvisation to identify movement characteristics for each of the groups. Pairs of the same level were asked to improvise together. Each individual was also asked to perform an improvisation on his/her own. We found that each of the three groups present specific movement organization with movement complexity increasing with the level of expertise. Experts performed shorter movement duration in conjunction with an increase range of movement. The direct comparison of individual and paired Conditions highlighted that the joint-improvisation reduced the complexity of the movement organization and those for all three levels while maintaining the differences between the groups. This direct comparison amongst those three distinct groups provides an original insight onto the nature of movement patterns in joint-improvisation situation. Overall, it reveals the role of both individual and collective properties in the emergence of social

Crafting continuity and change in Saudi society: Joint parent-youth transition-to-adulthood projects.

Science.gov (United States)

Khalifa, Hind; Alnuaim, Aziza A; Young, Richard A; Marshall, Sheila K; Popadiuk, Natalee

2018-02-01

Little is known about the transition to adulthood in traditional, developing countries such as Saudi Arabia. Previous research in other countries has revealed the importance of considering parents' support during the transition to adulthood. Thus, the purpose of this research was to examine how two generations negotiated the transition to adulthood. We asked the research question, What are the joint projects in which parents and youth plan and act on their plans for the youth's future? We used the action project method, an established qualitative approach, to answer these questions by observing the joint conversations of 14 parent and youth dyads. Our results provided evidence of an overarching higher level goal, or intentional framework, of crafting generational change and continuity within which participants' joint projects were embedded. Joint projects were organized into three groups: (a) negotiating educational and career futures, (b) promoting gender roles and marriage, and (c) shaping independence. Copyright © 2017 The Foundation for Professionals in Services for Adolescents. All rights reserved.

76 FR 8788 - National Nanotechnology Coordination Office; Bridging NanoEHS Research Efforts: A Joint US-EU...

Science.gov (United States)

2011-02-15

... OFFICE OF SCIENCE AND TECHNOLOGY POLICY National Nanotechnology Coordination Office; Bridging NanoEHS Research Efforts: A Joint US-EU Workshop: Public Meeting AGENCY: National Nanotechnology Coordination Office, STPO. ACTION: Notice of public meeting. SUMMARY: The National Nanotechnology Coordination...

The Perception-Action Model

DEFF Research Database (Denmark)

Grünbaum, Thor

2017-01-01

Milner and Goodale’s Two Visual Systems Hypothesis (TVSH) is regarded as common ground in recent discussions of visual consciousness. A central part of TVSH is a functional model of vision and action (a functional perception-action model, PAM for short). In this paper, I provide a brief overview...... of these current discussions and argue that PAM is ambiguous between a strong and a weak version. I argue that, given a standard way of individuating computational mechanisms, the available evidence cannot be used to distinguish between these versions. This not only has consequences for philosophical theories...

Joint resistance measurements of pancake and terminal joints for JT-60SA EF coils

Energy Technology Data Exchange (ETDEWEB)

Obana, Tetsuhiro, E-mail: obana.tetsuhiro@LHD.nifs.ac.jp [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Takahata, Kazuya; Hamaguchi, Shinji; Mito, Toshiyuki; Imagawa, Shinsaku [National Institute for Fusion Science, 322-6 Oroshi, Toki, Gifu 509-5292 (Japan); Kizu, Kaname; Murakami, Haruyuki; Yoshida, Kiyoshi [Japan Atomic Energy Agency, 801-1 Mukoyama, Naka, Ibaraki 311-0193 (Japan)

2013-11-15

Highlights: • To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted with a joint sample. • The joint sample was composed of pancake and terminal joints. • The measurements demonstrated that both joints fulfilled the design requirement. • Considering the measurements, the characteristics of both joints were investigated using an analytical model that represents the joints. -- Abstract: To evaluate the joint fabrication technology for the JT-60SA EF coils, joint resistance measurements were conducted using a sample consisting of pancake and terminal joints. Both joints are shake-hands lap joints composed of cable-in-conduit conductors and a pure copper saddle-shaped spacer. The measurements demonstrated that both joints fulfilled the design requirement. Considering these measurements, the characteristics of both joints were investigated using analytical models that represent the joints. The analyses indicated that the characteristics of the conductors used in the joints affect the characteristics of the joints.

Research on Condition Assessment Method of Transmission Tower Under the Action of Strong Wind

Science.gov (United States)

Huang, Ren-mou; An, Li-qiang; Zhang, Rong-lun; Wu, Jiong; Liang, Ya-feng

2018-03-01

Transmission towers are often subjected to the external damage of severe weather like strong wind and so on, which may cause the collapse due to the yield and fracture of the tower material. Aiming this issue, an assessment method was proposed in this paper to assess the operation condition of transmission towers under strong wind. With a reasonable assess index system established firstly, then the internal force of the tower material was solved and its stability was determined through the mechanical analysis of the transmission tower finite element model. Meanwhile, the condition risk level of the tower was finally determined by considering the difference among the influences of other factors like corrosion and loose of members, slope on the transmission tower through the analytic hierarchy process. The assessment method was applied to assess the wind-induced collapse of towers in 110kV Bao Yi II line in Wenchang City, Hainan Province, of which the result proves the method can assess the condition of transmission tower under strong wind and of guiding significance for improving the windproof capability of transmission towers.

Bridge Expansion Joint in Road Transition Curve: Effects Assessment on Heavy Vehicles

Directory of Open Access Journals (Sweden)

Paola Di Mascio

2017-06-01

Full Text Available Properly-designed road surfaces provide a durable surface on which traffic can pass smoothly and safely. In fact, the main causes that determine the structural decay of the pavement and its parts are the traffic loads. These repeated actions can create undesirable unevennesses on the road surface, which induce vertical accelerations on vehicles, up to hindering contact between pavement and tire, with dangerous consequences on traffic safety. The dynamic actions transmitted by the vehicles depend on these irregularities: often, a bridge expansion joint (BEJ, introducing a necessary discontinuity between different materials, determines from the beginning a geometric irregularity in the running surface. Besides, some structural conditions could emphasize the problem (e.g., local cracking due to the settlement of the subgrade near the abutment or the discontinuity of stiffness due to the presence of different materials. When the BEJ is located in a transition curve, an inevitable vertical irregularity between road and joint can reach values of some centimeters, with serious consequences for the road safety. This paper deals with the analysis of a case study of a BEJ. Several test surveys were performed in order to fully characterize the effects on both vehicles and pavement. The three-dimensional representation of the pavement surface and the acceleration measurements on a heavy test vehicle were performed to analyze the joint behavior under traffic. Finally, a finite element model was implemented to evaluate the stress contribution on vehicle components induced by the vertical irregularities.

Decoding complete reach and grasp actions from local primary motor cortex populations.

Science.gov (United States)

Vargas-Irwin, Carlos E; Shakhnarovich, Gregory; Yadollahpour, Payman; Mislow, John M K; Black, Michael J; Donoghue, John P

2010-07-21

How the activity of populations of cortical neurons generates coordinated multijoint actions of the arm, wrist, and hand is poorly understood. This study combined multielectrode recording techniques with full arm motion capture to relate neural activity in primary motor cortex (M1) of macaques (Macaca mulatta) to arm, wrist, and hand postures during movement. We find that the firing rate of individual M1 neurons is typically modulated by the kinematics of multiple joints and that small, local ensembles of M1 neurons contain sufficient information to reconstruct 25 measured joint angles (representing an estimated 10 functionally independent degrees of freedom). Beyond showing that the spiking patterns of local M1 ensembles represent a rich set of naturalistic movements involving the entire upper limb, the results also suggest that achieving high-dimensional reach and grasp actions with neuroprosthetic devices may be possible using small intracortical arrays like those already being tested in human pilot clinical trials.

Joint instability and osteoarthritis.

Science.gov (United States)

Blalock, Darryl; Miller, Andrew; Tilley, Michael; Wang, Jinxi

2015-01-01

Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA). Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

Russian joint ventures, upstream deals hit fast clip

International Nuclear Information System (INIS)

Anon.

1992-01-01

This paper reports that Russia is stepping up the pace of joint ventures and imports of petroleum technology and hardware. Among the latest action: Polar Lights, a 50-50 venture of Conoco Timan-Pechora Ltd. and Arkhangelskgeologia (AAG), started drilling in the first new-field oil-development project in Russia to include a US partner; The governments of Oman and the Kazakhstan republic signed an agreement covering oil and gas exploration, field development, and production in Kazakhstan; Phibro Energy Inc., Greenwich, Conn., last week reported the sale and delivery of the first full cargo of Russian crude oil produced and exported by a Russian-American joint venture; Era Aviation Inc., Anchorage, Alas., is sending two helicopters with crewmen to Russia to help assess the feasibility of oil and gas development off Sakhalin Island; In deals involving Canadian companies, SNC-Lavalin Inc., Montreal, received a contract for initial work on a $350 million (US) modernization of the Volvograd refinery in southern Russia

Mechanical characterization and force-displacement hysteretic curves from in-plane cyclic tests on strong masonry infills

Directory of Open Access Journals (Sweden)

Paolo Morandi

2018-02-01

Full Text Available This article contains information related to a recent study “Performance-based interpretation of in-plane cyclic tests on RC frames with strong masonry infills” (Morandi et al., 2017 [1]. Motivated by the necessity to improve the knowledge of the in-plane seismic response of rigid strong masonry infills, a wide experimental campaign based on in-plane cyclic tests on full-scale RC infilled frame specimens, supplemented with a complete characterization of the materials, has been conducted at the laboratory of the Department of Civil Engineering and Architecture of the University of Pavia. The masonry is constituted by vertically perforated 35 cm thick clay units with tongue and groove and dry head-joints and general-purpose mortar bed-joints. The paper reports the results of the mechanical characterization and of the force-displacement hysteretic curves from the in-plane cyclic tests.

The Interplay of Networking Activities and Internal Knowledge Actions for Subsidiary Influence within MNCs

DEFF Research Database (Denmark)

Tavani, Zhaleh Najafi; Giroud, Axèle; Andersson, Ulf

2012-01-01

Building on resource dependency theory; this research investigates the joint impacts of subsidiary knowledge based actions (Reverse Knowledge Transfer (RKT) and knowledge development) and networking activities (internal and external embeddedness) on its strategic influence in the multinational co...

Fatigue crack growth in welded joints in seawater

Energy Technology Data Exchange (ETDEWEB)

Lambert, S.B.

1988-01-01

A pipe-to-plate specimen has been developed to study the influence of seawater on the fatigue behaviour of welded tubular joints. DC potential drop techniques have been used to detect fatigue crack initiation, and to monitor the subsequent growth of fatigue cracks. Results for three specimens, tested in air are compared with similar data for tubular and T-plate joints. These comparisons indicate that the pipe/plate is a reasonable model of a tubular joint. Testing was performed on a further six specimens in artificial seawater; two each with free corrosion, optimum cathodic protection, and cathodic overprotection. Fatigue life reduction factors compared with corresponding tests in air were 1.8 and 2.8 for free corrosion, 1.7 and 1.1 with cathodic protection, and 4.2 and 3.3 with cathodic over-protection. These fatigue life reduction factors were comparable to results on T-plate specimens, and were strongly dependent on crack shape development. Linear elastic fracture mechanics techniques appear suitable for the calculation of fatigue crack propagation life. Three approximate solution techniques for crack tip stress intensity factors show reasonable agreement with experimentally derived values. It is recommended that forcing functions be used to model crack aspect ratio development in welded joints. Such forcing functions are influenced by the initial stress distribution and the environment. 207 refs., 192 figs., 22 tabs.

Joint Instability and Osteoarthritis

Directory of Open Access Journals (Sweden)

Darryl Blalock

2015-01-01

Full Text Available Joint instability creates a clinical and economic burden in the health care system. Injuries and disorders that directly damage the joint structure or lead to joint instability are highly associated with osteoarthritis (OA. Thus, understanding the physiology of joint stability and the mechanisms of joint instability-induced OA is of clinical significance. The first section of this review discusses the structure and function of major joint tissues, including periarticular muscles, which play a significant role in joint stability. Because the knee, ankle, and shoulder joints demonstrate a high incidence of ligament injury and joint instability, the second section summarizes the mechanisms of ligament injury-associated joint instability of these joints. The final section highlights the recent advances in the understanding of the mechanical and biological mechanisms of joint instability-induced OA. These advances may lead to new opportunities for clinical intervention in the prevention and early treatment of OA.

International joint ventures

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

2001-01-01

The article analysis problems connected with corporate joint ventures. Among others the possible conflicts between the joint venture agreement and the statutes of the companies is examined, as well as certain problems connected to the fact that the joint venture partners have created commen control...... over their joint company....

Drug control of an antirheumatic in Rheumatoid arthritis via scintigraphy of joints

International Nuclear Information System (INIS)

Kafarnik, D.; Semmler, U.; Wiegmann, A.; Pfannenstiel, P.; Stiftung Deutsche Klinik fuer Diagnostik, Wiesbaden

1979-01-01

Sixteen rheumatoid arthritis patients each received diclofenac sodium or placebos in a double-blind study. The general assesment of the success of therapy on the part of the physician or the patient, can be corrected to some extent by means of a semiquantitatively evaluated sup(99m)Tc-pertechnetat joint scintigraphy used in the patients and in the controls. In particular, the comparative examinations of the wrists, which were evaluated clinically, semiquantitatively and quantitatively, showed that the sensitivity of joint scintigraphy is sufficient to demonstrate additionally the anti-inflammatory action of an antirheumatic drug even if the drug had been administered for 14 days only. (orig.) 891 AJ/orig. 892 BRE [de

Joint Chiefs of Staff > About > The Joint Staff > Senior Enlisted Advisor

Science.gov (United States)

Skip to main content (Press Enter). Toggle navigation Joint Chiefs of Staff Joint Chiefs of Staff Joint Chiefs of Staff Facebook Twitter YouTube Flickr Blog Instagram Search JCS: Search Search Search JCS: Search Home Media News Photos Videos Publications About The Joint Staff Chairman Vice Chairman

A joint-constraint model for human joints using signed distance-fields

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Abel, Sarah Maria Niebe; Erleben, Kenny

2012-01-01

We present a local joint-constraint model for a single joint which is based on distance fields. Our model is fast, general, and well suited for modeling human joints. In this work, we take a geometric approach and model the geometry of the boundary of the feasible region, i.e., the boundary of all...... allowed poses. A region of feasible poses can be built by embedding motion captured data points in a signed distance field. The only assumption is that the feasible poses form a single connected set of angular values. We show how signed distance fields can be used to generate fast and general joint......-joint dependencies, or joints with more than three degrees of freedom. The resolution of the joint-constraints can be tweaked individually for each degree of freedom, which can be used to optimize memory usage. We perform a comparative study of the key-properties of various joint-constraint models, as well...

Comment Period for Proposed Remedy Selection Plan for Multiple Training Areas located at Joint Base Cape Cod

Science.gov (United States)

The U.S. Environmental Protection Agency (EPA) is seeking public comment on the EPA’s proposal indicating no further action is needed for multiple Training Areas on the Camp Edwards portion of Joint Base Cape Cod (JBCC).

Third National Report on compliance with the Joint Convention Obligations

International Nuclear Information System (INIS)

2008-09-01

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management, hereinafter referred to as the 'Joint Convention', is the result of international discussions that followed the adoption of the Convention on Nuclear Safety, in 1994. France signed the Joint Convention at the General Conference of the International Atomic Energy Agency (IAEA) held on 29 September 1997, the very first day the Joint Convention was opened for signature. She approved it on 22 February 2000 and filed the corresponding instruments with the IAEA on 27 April 2000. The Joint Convention entered into force on 18 June 2001. For many years, France has been taking an active part in the pursuit of international actions to reinforce nuclear safety and considers the Joint Convention to be a key step in that direction. The fields covered by the Joint Convention have long been part of the French approach to nuclear safety. This report is the third one of its kind. It is published in accordance with Article 32 of the Joint Convention and presents the measures taken by France to meet each of her obligations set out in the Convention. The facilities and the radioactive materials covered by this Convention are quite diversified in nature and are controlled in France by different regulatory authorities. Above a specific threshold of radioactive content, a facility is referred to as a 'basic nuclear facility' (installation nucleaire de base - INB) and placed under the control of the Nuclear Safety Authority (Autorite de surete nucleaire - ASN). Below that threshold and provided that the facility involved is subject to the nomenclature of classified facilities for other purposes than their radioactive materials, any facility may be considered as a 'classified facility on environmental-protection grounds' (installation classee pour la protection de l'environnement - ICPE) and placed under the control of the Ministry for the Environment. Facilities that contain only

Corrective Action Investigation Plan for Corrective Action Unit 145: Wells and Storage Holes, Nevada Test Site, Nevada, Rev. No.: 0

Energy Technology Data Exchange (ETDEWEB)

David A. Strand

2004-09-01

This Corrective Action Investigation Plan (CAIP) contains project-specific information for conducting site investigation activities at Corrective Action Unit (CAU) 145: Wells and Storage Holes. Information presented in this CAIP includes facility descriptions, environmental sample collection objectives, and criteria for the selection and evaluation of environmental samples. Corrective Action Unit 145 is located in Area 3 of the Nevada Test Site, which is 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 145 is comprised of the six Corrective Action Sites (CASs) listed below: (1) 03-20-01, Core Storage Holes; (2) 03-20-02, Decon Pad and Sump; (3) 03-20-04, Injection Wells; (4) 03-20-08, Injection Well; (5) 03-25-01, Oil Spills; and (6) 03-99-13, Drain and Injection Well. These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives. Additional information will be obtained by conducting a corrective action investigation (CAI) prior to evaluating corrective action alternatives and selecting the appropriate corrective action for each CAS. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. One conceptual site model with three release scenario components was developed for the six CASs to address all releases associated with the site. The sites will be investigated based on data quality objectives (DQOs) developed on June 24, 2004, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture; and Bechtel Nevada. The DQOs process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 145.

STUDY OF EXPERIMENTAL SAMPLES WITH DIFFERENT CONFIGURATIONS AT THE JOINTS COMPRESSIVE STRENGTH

Directory of Open Access Journals (Sweden)

E. N. Magomedova

2013-01-01

Full Text Available The article marked the behavior of concrete under the action of water, the effect of moisture and water saturation on the performance and durability of concrete waterproofing; offered special configuration interface, allowing to increase the strength characteristics of the concrete structure, the results of experimental studies; conclusions about the relationship configuration of joints and their strength.

Estimation of Joint types and Joint Limits from Motion capture data

DEFF Research Database (Denmark)

Engell-Nørregård, Morten Pol; Erleben, Kenny

2009-01-01

It is time-consuming for an animator to explicitly model joint types and joint limits of articulated figures. In this paper we describe a simple and fast approach to automated joint estimation from motion capture data of articulated figures. Our method will make the joint modeling more efficient ...

Reducing Weak to Strong Bisimilarity in CCP

Directory of Open Access Journals (Sweden)

Andrés Aristizábal

2012-12-01

Full Text Available Concurrent constraint programming (ccp is a well-established model for concurrency that singles out the fundamental aspects of asynchronous systems whose agents (or processes evolve by posting and querying (partial information in a global medium. Bisimilarity is a standard behavioural equivalence in concurrency theory. However, only recently a well-behaved notion of bisimilarity for ccp, and a ccp partition refinement algorithm for deciding the strong version of this equivalence have been proposed. Weak bisimiliarity is a central behavioural equivalence in process calculi and it is obtained from the strong case by taking into account only the actions that are observable in the system. Typically, the standard partition refinement can also be used for deciding weak bisimilarity simply by using Milner's reduction from weak to strong bisimilarity; a technique referred to as saturation. In this paper we demonstrate that, because of its involved labeled transitions, the above-mentioned saturation technique does not work for ccp. We give an alternative reduction from weak ccp bisimilarity to the strong one that allows us to use the ccp partition refinement algorithm for deciding this equivalence.

Identification of the contribution of the ankle and hip joints to multi-segmental balance control

NARCIS (Netherlands)

Boonstra, T.A.; Schouten, A.C.; Van der Kooij, H.

2013-01-01

Background Human stance involves multiple segments, including the legs and trunk, and requires coordinated actions of both. A novel method was developed that reliably estimates the contribution of the left and right leg (i.e., the ankle and hip joints) to the balance control of individual subjects.

Periodicity and chaos in strongly perturbed classical orbitals for Coulomb interactions

Energy Technology Data Exchange (ETDEWEB)

Klar, H

1986-01-01

Within the framework of classical mechanics two prototypes of strongly perturbed orbitals, the diamagnetism in hydrogen and electronic double excitation, are analyzed near critical phase space points (fixed points). The motion of the hydrogen electron under the joint influence of the Coulomb field and the magnetic field is periodic for any field strengths. For a two-electron atom however the author finds a chaotic time evolution of the electron pair correlation, causing presumably irregular spectral patterns. (Auth.).

Another short and elementary proof of strong subadditivity of quantum entropy

Science.gov (United States)

Ruskai, Mary Beth

2007-08-01

A short and elementary proof of the joint convexity of relative entropy is presented, using nothing beyond linear algebra. The key ingredients are an easily verified integral representation and the strategy used to prove the Cauchy-Schwarz inequality in elementary courses. Several consequences are proved in a way which allows an elementary proof of strong subadditivity in a few more lines. Some expository material on Schwarz inequalities for operators and the Holevo bound for partial measurements is also included.

Applying Analytic Reasoning to Clarify Intention and Responsibility in Joint Criminal Enterprise Cases

Directory of Open Access Journals (Sweden)

Anthony Amatrudo

2016-12-01

Full Text Available This paper argues that both criminologists and lawyers need a far more philosophically robust account of joint action, notably as it relates to technical matters of intentionality and responsibility when dealing with joint criminal enterprise cases. Criminology seems unable to see beyond the superficiality of cultural explanations ill-suited to understanding matters of action. Law seems wedded to mystical notions of foresight. As regards the law there seems common agreement that joint enterprise prosecutions tend to over-criminalise secondary parties. This paper suggests that the current discussions around joint criminal enterprise will benefit from a critical engagement with analytical philosophy. The paper will examine a series of technical accounts of shared commitment and intention in order to explain the problems of joint criminal enterprise (multi-agent criminal activity. Este artículo defiende que tanto criminólogos como abogados necesitan ofrecer una acción conjunta más robusta, desde el punto de vista filosófico, especialmente en lo que se refiere a aspectos técnicos de intencionalidad y responsabilidad, al tratar casos de colaboración criminal. La criminología parece incapaz de ver más allá de la superficialidad de las explicaciones culturales, inadecuadas para entender cuestiones de acción. El derecho parece aliado con nociones místicas de previsión. En lo que respecta al derecho, parece que existe un consenso en que los fiscales de asociaciones de malhechores tienden a penalizar en exceso a los cómplices. Este artículo sugiere que el debate actual sobre asociaciones criminales se beneficiará de un compromiso crítico con la filosofía analítica. El artículo analiza un conjunto de explicaciones técnicas de compromiso e intención compartidos para explicar los problemas de las asociaciones criminales (actividad criminal multi-agente. DOWNLOAD THIS PAPER FROM SSRN: http://ssrn.com/abstract=2847796

76 FR 60006 - Joint Europe Africa Deployment & Distribution Conference 2011: “Adapting To Challenge and Change”

Science.gov (United States)

2011-09-28

... DEPARTMENT OF DEFENSE Office of the Secretary Joint Europe Africa Deployment & Distribution Conference 2011: ``Adapting To Challenge and Change'' AGENCY: United States Africa Command, Department of Defense (DoD). ACTION: Notice of conference. SUMMARY: This document announces that U.S. Africa Command...

Corrective Action Investigation Plan for Corrective Action Unit 139: Waste Disposal Sites, Nevada Test Site, Nevada, Rev. No.: 0

Energy Technology Data Exchange (ETDEWEB)

Grant Evenson

2006-04-01

Corrective Action Unit (CAU) 139 is located in Areas 3, 4, 6, and 9 of the Nevada Test Site, which is 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 139 is comprised of the seven corrective action sites (CASs) listed below: (1) 03-35-01, Burn Pit; (2) 04-08-02, Waste Disposal Site; (3) 04-99-01, Contaminated Surface Debris; (4) 06-19-02, Waste Disposal Site/Burn Pit; (5) 06-19-03, Waste Disposal Trenches; (6) 09-23-01, Area 9 Gravel Gertie; and (7) 09-34-01, Underground Detection Station. These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives with the exception of CASs 09-23-01 and 09-34-01. Regarding these two CASs, CAS 09-23-01 is a gravel gertie where a zero-yield test was conducted with all contamination confined to below ground within the area of the structure, and CAS 09-34-01 is an underground detection station where no contaminants are present. Additional information will be obtained by conducting a corrective action investigation (CAI) before evaluating corrective action alternatives and selecting the appropriate corrective action for the other five CASs where information is insufficient. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. The sites will be investigated based on the data quality objectives (DQOs) developed on January 4, 2006, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture; and Bechtel Nevada. The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 139.

Effect of adhesive stiffness and thickness on stress distributions in structural finger joints

Science.gov (United States)

Leslie H. Groom; Robert J. Leichti

1994-01-01

Environmental, political, and socioeconomic actions over the past several years have resulted in a decreased wood supply at a time when there is an increased demand for forest products. This combination of increased demand and decreased supply has forced more emphasis on engineered wood products, a varied category usually connected with adhesively-bonded end joints, of...

Chemical Compositions of Ligusticum chuanxiong Oil and Lemongrass Oil and Their Joint Action against Aphis citricola Van Der Goot (Hemiptera: Aphididae

Directory of Open Access Journals (Sweden)

Chao Zhang

2016-10-01

Full Text Available In order to develop novel botanical insecticides, the joint action of Ligusticum chuanxiong oil (LCO and lemongrass oil (LO against Aphis citricola van der Goot was determined systematically indoors and outdoors. The chemical profiles of LCO and LO as determined by gas chromatography–mass spectrometry (GC-MS analysis revealed that the main compounds from LCO were (Z-ligustilide (44.58% and senkyunolide A (26.92%, and that of LO were geranial (42.16% and neral (32.58%, respectively. The mixture of LCO and LO showed significant synergy against A. citricola, with a common-toxicity coefficient (CTC value of 221.46 at the optimal ratio of LCO to LO (4:1, w:w. Based on the results of solvents and emulsifiers screening, L. chuanxiong oil·Lemongrass oil 20% emulsifiable concentrate (20% LCO·LO EC was developed, and its stability was confirmed with tests of cold and thermal storage. Field trials indicated that the insecticidal activity of the diluted 20% LCO·LO EC (1000 fold dilution was comparable to conventional pesticide (20% imidacloprid EC on A. citricola seven days after application. Thus, the mixture of LCO and LO has the potential to be further developed as a botanical pesticide.

Long-Acting Diclofenac Ester Prodrugs for Joint Injection

DEFF Research Database (Denmark)

Mertz, Nina; Larsen, Susan Weng; Kristensen, Jesper

2016-01-01

A prodrug approach for local and sustained diclofenac action after injection into joints based on ester prodrugs having a pH-dependent solubility is presented. Inherent ester prodrug properties influencing the duration of action include their pH-dependent solubility and charge state, as well...... as susceptibility to undergo esterase facilitated hydrolysis. In this study, physicochemical properties and pH rate profiles of 3 diclofenac ester prodrugs differing with respect to the spacer carbon chain length between the drug and the imidazole-based promoiety were determined and a rate equation for prodrug...... degradation in aqueous solution in the pH range 1-10 was derived. In the pH range 6-10, the prodrugs were subject to parallel degradation to yield diclofenac and an indolinone derivative. The prodrug degradation was found to be about 6-fold faster in 80% (vol/vol) human plasma as compared to 80% (vol...

Improving Therapeutic Relationships: Joint Crisis Planning for Individuals With Psychotic Disorders.

Science.gov (United States)

Farrelly, Simone; Lester, Helen; Rose, Diana; Birchwood, Max; Marshall, Max; Waheed, Waquas; Henderson, R Claire; Szmukler, George; Thornicroft, Graham

2015-12-01

Outcomes for individuals with psychosis remain far from acceptable. Recently, prominent psychiatrists have called for an improved understanding of the impact of social contexts, and how social contexts might influence the development and maintenance of mental health problems. A key social context for individuals with psychosis is the therapeutic relationship. As part of a trial of joint crisis planning in England, this qualitative study aimed to determine the mechanism through which joint crisis planning might affect the therapeutic relationship. Results suggest that routine processes in mental health care are affected by policy and organizational requirements for risk mitigation-aspects that undermine person-centered approaches. In contrast, strong therapeutic relationships are characterized by individualized care and reliable and respectful treatment. The Joint Crisis Plan intervention partially succeeded in reducing contextual influences on routine role enactments, facilitating the demonstration of respect and improving the therapeutic relationship. © The Author(s) 2015.

Reliability of Tubular Joints

DEFF Research Database (Denmark)

Sørensen, John Dalsgaard; Thoft-Christensen, Palle

In this paper the preliminary results obtained by tests on tubular joints are presented. The joints are T-joints and the loading is static. It is the intention in continuation of these tests to perform tests on other types of joints (e.g. Y-joints) and also with dynamic loading. The purpose...... of the test is partly to obtain empirical data for the ultimate load-carrying capacity of tubular T-joints and partly to obtain some experience in performing tests with tubular joints. It is well known that tubular joints are usually designed in offshore engineering on the basis of empirical formulas obtained...... by experimental test results. Therefore, there is a need for performing experimental tests in this area....

Mechanical Simulation of the Extension and Flexion of the Elbow Joint in Rehabilitation

Directory of Open Access Journals (Sweden)

Iman Vahdat

2013-01-01

Full Text Available Objective: The goal of the present study was to improve the extension and flexion of the elbow joint for rehabilitation purposes, in terms of energy dissipation and of injuries caused by stress imposed on connective tissue by exercise equipments during force transfer , by investigation of viscoelastic property variations during change in speed of motion. Materials & Methods: A sample of five men without any previous neuromuscular impairment of the elbow joint was chosen by the BMI factor. The passive continuous motion test (CPM was performed by the CYBEX isokinetic system in the extension and flexion movements of the elbow joint of the left hand, at 4 different speeds (15, 45, 75 and120 Deg/s during 5 consecutive cycles at the range of motion of about 0 to 130 degrees. The experimental data was exported to the MATLAB software for analysis. In order to determine viscoelastic property effects and biomechanical parameters, we used a passive viscoelastic mechanical model constructed by 3 elements for simulation, and also we used the curve fitting method to derive the elastic and viscose coefficients for the model.,. Results: Results of experiments showed that by increasing the speed of motion, the value of work done, hysteresis and elastic coefficient increased and the value of viscose coefficient decreased. Also, it appeared that by increasing the speed of motion, the effect of viscose resistance on the passive torque curves increased. In addition, there was significant correlation between the action of the mechanical model and the action of the concerned limbs, during the movement. Conclusion: It was concluded that in order to improve motion and to reduce imposed risks and injuries to joints and limbs, rehabilitation exercises better be performed at lower speeds and with rehabilitation equipments supported by viscoelastic resistant force.

Influence of joint dip angle on seismic behaviors of rock foundation

International Nuclear Information System (INIS)

Yang, Lei; Gao, Yang; Jiang, Yujing; Li, Bo; Li Shucai

2012-01-01

The seismic response of rock foundation to seismic loads is an important issue to the stability and safety of nuclear power plants. Due to the fact that the discontinuities like joints existing in the rock mass govern principally the deformation and failure behaviors of the rock mass, the influence of discontinuities on the seismic behaviors of rock mass remains as one of the fundamental problems in the safety assessment of nuclear power plants. In this study, the distinct element method (DEM) and finite element method (FEM) were adopted to investigate the seismic responses of rock foundation to a real seismic wave, taking into account the effect of joint dip angle on the deformation and dynamic behaviors of rock foundation. In the DEM simulations, the intact rock has an amplification effect on the amplitudes of seismic waves, while the joints exhibit an attenuation effect on the seismic waves. In the FEM simulations, however, the attenuation effect of joints is not obvious. The dip angle of joints has strong effects on the deformation and dynamic behaviors of rock foundation, in terms that different dip angles lead to obviously different deformation and horizontal stress in the rock foundation when subjected to seismic load. When the dip angle of joints is around 60deg, the seismic velocity, displacement and stress reach the maximums. Therefore, attentions need to be paid on this factor during the seismic design of nuclear power plants. (author)

Individual differences in action co-representation : not personal distress or subclinical psychotic experiences but sex composition modulates joint action performance

NARCIS (Netherlands)

van der Weiden, Anouk; Aarts, Henk; Prikken, Merel; van Haren, Neeltje E M

2015-01-01

Successful social interaction requires the ability to integrate as well as distinguish own and others' actions. Normally, the integration and distinction of self and other are a well-balanced process, occurring without much effort or conscious attention. However, not everyone is blessed with the

[Intra-articular injections of hyaluronic acid for anterior disc displacement of temporomandibular joint].

Science.gov (United States)

Long, X

2017-03-09

Anterior disc displacement (ADD) of temporomandibular joint (TMJ) is regarded as one of the major findings in temporomandibular disorders (TMD). It is related to joint noise, pain, mandibular dysfunction, degenerative change and osteoarthritis. In the mean time, the pathological changes were found in synovial membrane and synovial fluid. Hyaluronic acid is a principal component of the synovial fluid which plays an important role in nutrition, lubrication, anti-inflammation and cartilage repair. The synthesis, molecule weight, and concentration of hyaluronic acid are decreased during TMD and cause TMJ degenerative changes. The clinical conditions, pathological changes, the mechanism of action for hyaluronic acid and the treatment of anterior disc displacement of TMJ are discussed in this article.

Ruminant methane reduction through livestock development in Tanzania. Final report for US Department of Energy and US Initiative on Joint Implementation--Activities Implemented Jointly

International Nuclear Information System (INIS)

Livingston, Roderick

1999-01-01

This project was designed to help develop the US Initiative on Joint Implementation activities in Eastern Africa. It has been communicated in meetings with representatives from the Ministry of Environment of Tanzania and the consultant group that developed Tanzania's National Climate Change Action Plan, the Centre for Energy, Environment, Science and Technology, that this project fits very well with the developmental and environmental goals of the Government of Tanzania. The goal of the Activities Implemented Jointly ruminant livestock project is to reduce ruminant methane emissions in Eastern Africa. The project plans a sustainable cattle multiplication unit (CMU) at Mabuki Ranch in the Mwanza Region of Tanzania. This CMU will focus on raising genetically improved animals to be purchased by farmers, developmental organizations, and other CMUs in Tanzania. Through the purchase of these animals farmers will raise their income generation potential and reduce ruminant methane emissions

78 FR 37821 - Joint Meeting of the Risk Communication Advisory Committee and Tobacco Products Scientific...

Science.gov (United States)

2013-06-24

... 15, 2013 from 9 a.m. to 5 p.m. ADDRESSES: Food and Drug Administration, White Oak Campus. Location... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2013-N-0001... Committee; Notice of Joint Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice...

Exit from Synchrony in Joint Improvised Motion.

Directory of Open Access Journals (Sweden)

Assi Dahan

Full Text Available Motion synchrony correlates with effective and well-rated human interaction. However, people do not remain locked in synchrony; Instead, they repeatedly enter and exit synchrony. In many important interactions, such as therapy, marriage and parent-infant communication, it is the ability to exit and then re-enter synchrony that is thought to build strong relationship. The phenomenon of entry into zero-phase synchrony is well-studied experimentally and in terms of mathematical modeling. In contrast, exit-from-synchrony is under-studied. Here, we focus on human motion coordination, and examine the exit-from-synchrony phenomenon using experimental data from the mirror game paradigm, in which people perform joint improvised motion, and from human tracking of computer-generated stimuli. We present a mathematical mechanism that captures aspects of exit-from-synchrony in human motion. The mechanism adds a random motion component when the accumulated velocity error between the players is small. We introduce this mechanism to several models for human coordinated motion, including the widely studied HKB model, and the predictor-corrector model of Noy, Dekel and Alon. In all models, the new mechanism produces realistic simulated behavior when compared to experimental data from the mirror game and from tracking of computer generated stimuli, including repeated entry and exit from zero-phase synchrony that generates a complexity of motion similar to that of human players. We hope that these results can inform future research on exit-from-synchrony, to better understand the dynamics of coordinated action of people and to enhance human-computer and human-robot interaction.

Jointly structuring triadic spaces of meaning and action: book sharing from 3 months on.

Directory of Open Access Journals (Sweden)

Nicole eRossmanith

2014-12-01

Full Text Available This study explores the emergence of triadic interactions through the example of book sharing. As part of a naturalistic study, 10 infants were visited in their homes from 3-12 months. We report that (1 book sharing as a form of infant-caregiver-object interaction occurred from as early as 3 months. Using qualitative video analysis at a micro-level adapting methodologies from conversation and interaction analysis, we demonstrate that caregivers and infants practiced book sharing in a highly co-ordinated way, with caregivers carving out interaction units and shaping actions into action arcs and infants actively participating and co-ordinating their attention between mother and object from the beginning. We also (2 sketch a developmental trajectory of book sharing over the first year and show that the quality and dynamics of book sharing interactions underwent considerable change as the ecological situation was transformed in parallel with the infants' development of attention and motor skills. Social book sharing interactions reached an early peak at 6 months with the infants becoming more active in the coordination of attention between caregiver and book. From 7-9 months, the infants shifted their interest largely to solitary object exploration, in parallel with newly emerging postural and object manipulation skills, disrupting the social coordination and the cultural frame of book sharing. In the period from 9-12 months, social book interactions resurfaced, as infants began to effectively integrate object actions within the socially shared activity. In conclusion, to fully understand the development and qualities of triadic cultural activities such as book sharing, we need to look especially at the hitherto overlooked early period from 4-6 months, and investigate how shared spaces of meaning and action are structured together in and through interaction, creating the substrate for continuing cooperation and cultural learning.

Jointly structuring triadic spaces of meaning and action: book sharing from 3 months on.

Science.gov (United States)

Rossmanith, Nicole; Costall, Alan; Reichelt, Andreas F; López, Beatriz; Reddy, Vasudevi

2014-01-01

This study explores the emergence of triadic interactions through the example of book sharing. As part of a naturalistic study, 10 infants were visited in their homes from 3-12 months. We report that (1) book sharing as a form of infant-caregiver-object interaction occurred from as early as 3 months. Using qualitative video analysis at a micro-level adapting methodologies from conversation and interaction analysis, we demonstrate that caregivers and infants practiced book sharing in a highly co-ordinated way, with caregivers carving out interaction units and shaping actions into action arcs and infants actively participating and co-ordinating their attention between mother and object from the beginning. We also (2) sketch a developmental trajectory of book sharing over the first year and show that the quality and dynamics of book sharing interactions underwent considerable change as the ecological situation was transformed in parallel with the infants' development of attention and motor skills. Social book sharing interactions reached an early peak at 6 months with the infants becoming more active in the coordination of attention between caregiver and book. From 7 to 9 months, the infants shifted their interest largely to solitary object exploration, in parallel with newly emerging postural and object manipulation skills, disrupting the social coordination and the cultural frame of book sharing. In the period from 9 to 12 months, social book interactions resurfaced, as infants began to effectively integrate manual object actions within the socially shared activity. In conclusion, to fully understand the development and qualities of triadic cultural activities such as book sharing, we need to look especially at the hitherto overlooked early period from 4 to 6 months, and investigate how shared spaces of meaning and action are structured together in and through interaction, creating the substrate for continuing cooperation and cultural learning.

Strong deflection lensing by a Lee–Wick black hole

Directory of Open Access Journals (Sweden)

Shan-Shan Zhao

2017-11-01

Full Text Available We study strong deflection gravitational lensing by a Lee–Wick black hole, which is a non-singular black hole generated by a high derivative modification of Einstein–Hilbert action. The strong deflection lensing is expected to produce a set of relativistic images very closed to the event horizon of the black hole. We estimate its observables for the supermassive black hole in our Galactic center. It is found that the Lee–Wick black hole can be distinguished from the Schwarzschild black hole via such lensing effects when the UV scale is not very large, but the requiring resolution is much higher than current capability.

Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. Fourth National Report on Compliance with the Joint Convention Obligations. France

International Nuclear Information System (INIS)

2011-09-01

The Joint Convention on the Safety of Spent Fuel Management and the Safety of Radioactive Waste Management, hereinafter referred to as the 'Joint Convention', is the result of international discussions that followed the adoption of the Convention on Nuclear Safety, in 1994. France signed the Joint Convention at the General Conference of the International Atomic Energy Agency (IAEA) held on 29 September 1997, the very first day the Joint Convention was opened for signature. She approved it on 22 February 2000 and filed the corresponding instruments with the IAEA on 27 April 2000. The Joint Convention entered into force on 18 June 2001. For many years, France has been taking an active part in the pursuit of international actions to reinforce nuclear safety and considers the Joint Convention to be a key step in that direction. The fields covered by the Joint Convention have long been part of the French approach to nuclear safety. This report is the fourth of its kind. It is published in accordance with Article 32 of the Joint Convention and presents the measures taken by France to meet each of her obligations set out in the Convention. The facilities and radioactive materials covered by the Joint Convention are much diversified in nature and are controlled in France by different regulatory authorities (see Section E). Over and above a specific threshold of radioactive content, a facility is referred to as a 'basic nuclear facility' (installation nucleaire de base - INB) and placed under the control of the French Nuclear Safety Authority (Autorite de surete nucleaire - ASN). Below that threshold and provided that the facility involved falls under a category of the nomenclature of classified facilities for other purposes than their radioactive materials, any facility may be considered as a 'classified facility on environmental-protection grounds' (installation classee pour la protection de l'environnement - ICPE) and placed under the control of the Ministry for the

"Bill is now singing": joint engagement and the emergence of social communication of three young children with autism.

Science.gov (United States)

Vaiouli, Potheini; Grimmet, Kharon; Ruich, Lawrence J

2015-01-01

Young children with autism spectrum disorder meet significant challenges in joint attention skills and in social communication. A child-centered, improvisational, music therapy intervention model was implemented to promote engagement in three young children with autism in a kindergarten classroom. A multiple baseline design compared the children's performance through three phases of intervention: focus on faces, response to joint attention, and initiation of joint attention. A complimentary qualitative analysis of teacher and parent experiences allowed for an in-depth understanding of the role of social environment in supporting emerging social communication skills among three children. As all children showed improvement in joint attention and actions of social engagement, this study bears evidence on the potential of music therapy as a promising intervention for promoting social skills of young children with autism spectrum disorder. © The Author(s) 2013.

The doctrine of joint criminal action in the ad hoc tribunals and its scope in the Rome Statute

Directory of Open Access Journals (Sweden)

Miren Odriozola-Gurrutxaga

2014-03-01

Full Text Available The first judgment of the International Criminal Court has confirmed that article 25 (3 of the Rome Statute adopts the theory of control of the act to distinguish between principals and accessories. On the contrary, since 2003, the ad hoc tribunals’ case law bases the notion of co-perpetration on the Joint Criminal Enterprise doctrine, using a subjective criterion approach. In this article we will first analyze the problems raised by that case law of the ad hoc tribunals, and then, we will study the article of the Rome Statute which apparently most resembles the Joint Criminal Enterprise doctrine: article 25 (3 (d. The article concludes that none of the three categories of that doctrine is included in the said provision.

Communicating actionable risk for terrorism and other hazards.

Science.gov (United States)

Wood, Michele M; Mileti, Dennis S; Kano, Megumi; Kelley, Melissa M; Regan, Rotrease; Bourque, Linda B

2012-04-01

We propose a shift in emphasis when communicating to people when the objective is to motivate household disaster preparedness actions. This shift is to emphasize the communication of preparedness actions (what to do about risk) rather than risk itself. We have called this perspective "communicating actionable risk," and it is grounded in diffusion of innovations and communication theories. A representative sample of households in the nation was analyzed using a path analytic framework. Preparedness information variables (including content, density, and observation), preparedness mediating variables (knowledge, perceived effectiveness, and milling), and preparedness actions taken were modeled. Clear results emerged that provide a strong basis for communicating actionable risk, and for the conclusion both that information observed (seeing preparedness actions that other have taken) and information received (receiving recommendations about what preparedness actions to take) play key, although different, roles in motivating preparedness actions among the people in our nation. © 2011 Society for Risk Analysis.

Does generalized joint hypermobility predict joint injury in sport? A review.

LENUS (Irish Health Repository)

Donaldson, Peter R

2012-02-01

OBJECTIVE: To determine whether persons with generalized joint hypermobility have an increased risk of lower limb joint injury during sport. DATA SOURCES: PubMed, CINAHL, EMBASE, and SportDiscus were searched through February 2009, without language restrictions, using terms related to risk; hip, ankle, and knee injuries; and joint instability. Reference lists of included studies and relevant reviews were searched by hand. STUDY SELECTION: Selection criteria were peer-reviewed studies with a prospective design that used an objective scale to measure generalized joint hypermobility; the participants were engaged in sport activity, and the injury data were quantitative and based on diagnosis by a health professional, were self-reported, or resulted in time lost to athletic participation. The studies were screened by 1 researcher and checked by a second. Study methods were independently assessed by 2 investigators using the 6-point scale for prognostic studies developed by Pengel. Disagreements were resolved through discussion. Of 4841 studies identified, 18 met inclusion criteria. Of these, 8 were included in random-effects meta-analyses. DATA EXTRACTION: The data extracted by 2 reviewers included participant and sport characteristics and details of joint hypermobility and injury measurements. More detailed data for 4 investigations were obtained from the study authors. Where possible, hypermobility was defined as >\\/=4 of 9 points on the British Society of Rheumatology Scale (BSRS). MAIN RESULTS: Lower limb joint injuries (3 studies, 1047 participants) occurred in 14% of participants. Using the BSRS of joint hypermobility, any lower limb injury was not associated with hypermobility [odds ratio (OR), 1.43; 95% confidence interval (CI), 0.56-3.67]. Using the original authors\\' definitions, hypermobility was associated with risk of knee joint injuries (OR, 2.62; 95% CI, 1.04-6.58) in 5 studies. In 4 studies in which the BSRS could be used (1167 participants; incidence

Modeling Interdependent and Periodic Real-World Action Sequences

Science.gov (United States)

Kurashima, Takeshi; Althoff, Tim; Leskovec, Jure

2018-01-01

Mobile health applications, including those that track activities such as exercise, sleep, and diet, are becoming widely used. Accurately predicting human actions in the real world is essential for targeted recommendations that could improve our health and for personalization of these applications. However, making such predictions is extremely difficult due to the complexities of human behavior, which consists of a large number of potential actions that vary over time, depend on each other, and are periodic. Previous work has not jointly modeled these dynamics and has largely focused on item consumption patterns instead of broader types of behaviors such as eating, commuting or exercising. In this work, we develop a novel statistical model, called TIPAS, for Time-varying, Interdependent, and Periodic Action Sequences. Our approach is based on personalized, multivariate temporal point processes that model time-varying action propensities through a mixture of Gaussian intensities. Our model captures short-term and long-term periodic interdependencies between actions through Hawkes process-based self-excitations. We evaluate our approach on two activity logging datasets comprising 12 million real-world actions (e.g., eating, sleep, and exercise) taken by 20 thousand users over 17 months. We demonstrate that our approach allows us to make successful predictions of future user actions and their timing. Specifically, TIPAS improves predictions of actions, and their timing, over existing methods across multiple datasets by up to 156%, and up to 37%, respectively. Performance improvements are particularly large for relatively rare and periodic actions such as walking and biking, improving over baselines by up to 256%. This demonstrates that explicit modeling of dependencies and periodicities in real-world behavior enables successful predictions of future actions, with implications for modeling human behavior, app personalization, and targeting of health interventions. PMID

Impurity Effects in Electroplated-Copper Solder Joints

Directory of Open Access Journals (Sweden)

Hsuan Lee

2018-05-01

Full Text Available Copper (Cu electroplating is a mature technology, and has been extensively applied in microelectronic industry. With the development of advanced microelectronic packaging, Cu electroplating encounters new challenges for atomic deposition on a non-planar substrate and to deliver good throwing power and uniform deposit properties in a high-aspect-ratio trench. The use of organic additives plays an important role in modulating the atomic deposition to achieve successful metallic coverage and filling, which strongly relies on the adsorptive and chemical interactions among additives on the surface of growing film. However, the adsorptive characteristic of organic additives inevitably results in an incorporation of additive-derived impurities in the electroplated Cu film. The incorporation of high-level impurities originating from the use of polyethylene glycol (PEG and chlorine ions significantly affects the microstructural evolution of the electroplated Cu film, and the electroplated-Cu solder joints, leading to the formation of undesired voids at the joint interface. However, the addition of bis(3-sulfopropyl disulfide (SPS with a critical concentration suppresses the impurity incorporation and the void formation. In this article, relevant studies were reviewed, and the focus was placed on the effects of additive formula and plating parameters on the impurity incorporation in the electroplated Cu film, and the void formation in the solder joints.

Strong Stackelberg reasoning in symmetric games: An experimental replication and extension

Science.gov (United States)

Colman, Andrew M.; Lawrence, Catherine L.

2014-01-01

In common interest games in which players are motivated to coordinate their strategies to achieve a jointly optimal outcome, orthodox game theory provides no general reason or justification for choosing the required strategies. In the simplest cases, where the optimal strategies are intuitively obvious, human decision makers generally coordinate without difficulty, but how they achieve this is poorly understood. Most theories seeking to explain strategic coordination have limited applicability, or require changes to the game specification, or introduce implausible assumptions or radical departures from fundamental game-theoretic assumptions. The theory of strong Stackelberg reasoning, according to which players choose strategies that would maximize their own payoffs if their co-players could invariably anticipate any strategy and respond with a best reply to it, avoids these problems and explains strategic coordination in all dyadic common interest games. Previous experimental evidence has provided evidence for strong Stackelberg reasoning in asymmetric games. Here we report evidence from two experiments consistent with players being influenced by strong Stackelberg reasoning in a wide variety of symmetric 3 × 3 games but tending to revert to other choice criteria when strong Stackelberg reasoning generates small payoffs. PMID:24688846

Strong Stackelberg reasoning in symmetric games: An experimental replication and extension.

Science.gov (United States)

Pulford, Briony D; Colman, Andrew M; Lawrence, Catherine L

2014-01-01

In common interest games in which players are motivated to coordinate their strategies to achieve a jointly optimal outcome, orthodox game theory provides no general reason or justification for choosing the required strategies. In the simplest cases, where the optimal strategies are intuitively obvious, human decision makers generally coordinate without difficulty, but how they achieve this is poorly understood. Most theories seeking to explain strategic coordination have limited applicability, or require changes to the game specification, or introduce implausible assumptions or radical departures from fundamental game-theoretic assumptions. The theory of strong Stackelberg reasoning, according to which players choose strategies that would maximize their own payoffs if their co-players could invariably anticipate any strategy and respond with a best reply to it, avoids these problems and explains strategic coordination in all dyadic common interest games. Previous experimental evidence has provided evidence for strong Stackelberg reasoning in asymmetric games. Here we report evidence from two experiments consistent with players being influenced by strong Stackelberg reasoning in a wide variety of symmetric 3 × 3 games but tending to revert to other choice criteria when strong Stackelberg reasoning generates small payoffs.

Strong Stackelberg reasoning in symmetric games: An experimental replication and extension

Directory of Open Access Journals (Sweden)

Briony D. Pulford

2014-02-01

Full Text Available In common interest games in which players are motivated to coordinate their strategies to achieve a jointly optimal outcome, orthodox game theory provides no general reason or justification for choosing the required strategies. In the simplest cases, where the optimal strategies are intuitively obvious, human decision makers generally coordinate without difficulty, but how they achieve this is poorly understood. Most theories seeking to explain strategic coordination have limited applicability, or require changes to the game specification, or introduce implausible assumptions or radical departures from fundamental game-theoretic assumptions. The theory of strong Stackelberg reasoning, according to which players choose strategies that would maximize their own payoffs if their co-players could invariably anticipate any strategy and respond with a best reply to it, avoids these problems and explains strategic coordination in all dyadic common interest games. Previous experimental evidence has provided evidence for strong Stackelberg reasoning in asymmetric games. Here we report evidence from two experiments consistent with players being influenced by strong Stackelberg reasoning in a wide variety of symmetric 3 × 3 games but tending to revert to other choice criteria when strong Stackelberg reasoning generates small payoffs.

75 FR 36427 - Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management...

Science.gov (United States)

2010-06-25

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2010-N-0001] Joint Meeting of the Arthritis Advisory Committee and the Drug Safety and Risk Management Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice...

A computational model for three-dimensional jointed media with a single joint set

International Nuclear Information System (INIS)

Koteras, J.R.

1994-02-01

This report describes a three-dimensional model for jointed rock or other media with a single set of joints. The joint set consists of evenly spaced joint planes. The normal joint response is nonlinear elastic and is based on a rational polynomial. Joint shear stress is treated as being linear elastic in the shear stress versus slip displacement before attaining a critical stress level governed by a Mohr-Coulomb faction criterion. The three-dimensional model represents an extension of a two-dimensional, multi-joint model that has been in use for several years. Although most of the concepts in the two-dimensional model translate in a straightforward manner to three dimensions, the concept of slip on the joint planes becomes more complex in three dimensions. While slip in two dimensions can be treated as a scalar quantity, it must be treated as a vector in the joint plane in three dimensions. For the three-dimensional model proposed here, the slip direction is assumed to be the direction of maximum principal strain in the joint plane. Five test problems are presented to verify the correctness of the computational implementation of the model

The joint flanker effect and the joint Simon effect: On the comparability of processes underlying joint compatibility effects.

Science.gov (United States)

Dittrich, Kerstin; Bossert, Marie-Luise; Rothe-Wulf, Annelie; Klauer, Karl Christoph

2017-09-01

Previous studies observed compatibility effects in different interference paradigms such as the Simon and flanker task even when the task was distributed across two co-actors. In both Simon and flanker tasks, performance is improved in compatible trials relative to incompatible trials if one actor works on the task alone as well as if two co-actors share the task. These findings have been taken to indicate that actors automatically co-represent their co-actor's task. However, recent research on the joint Simon and joint flanker effect suggests alternative non-social interpretations. To which degree both joint effects are driven by the same underlying processes is the question of the present study, and it was scrutinized by manipulating the visibility of the co-actor. While the joint Simon effect was not affected by the visibility of the co-actor, the joint flanker effect was reduced when participants did not see their co-actors but knew where the co-actors were seated. These findings provide further evidence for a spatial interpretation of the joint Simon effect. In contrast to recent claims, however, we propose a new explanation of the joint flanker effect that attributes the effect to an impairment in the focusing of spatial attention contingent on the visibility of the co-actor.

Collaborative agency to support integrated care for children, young people and families: an action research study.

Science.gov (United States)

Stuart, Kaz

2014-04-01

Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration. The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of 'collaborative agency' to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration. Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice. The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner's experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

Pre- and postirradiation properties of brazed joints of AISI 316L stainless steel

International Nuclear Information System (INIS)

Brossa, M.; Franconi, E.; Guerreschi, U.; Pierazzi, L.; Poggi, P.; Rustia, V.

1994-01-01

An extensive test campaign has been performed to verify the reliability and the endurance of brazed joints between AISI 316L parts for structural applications in the nuclear field. The tests, conducted for comparison with three different high melting temperature alloys, included tensile tests (normal and shear), fatigue tests (fatigue crack propagation, low cycle fatigue, 4-point bending fatigue) and impact tests; besides, tensile tests have been performed with both unirradiated and irradiated specimens. Generally, the tests demonstrated satisfactory mechanical properties of the joints and revealed occasionally strong differences in the behaviour of the different brazing alloys, thus providing important design indications. ((orig.))

A Modelling Method of Bolt Joints Based on Basic Characteristic Parameters of Joint Surfaces

Science.gov (United States)

Yuansheng, Li; Guangpeng, Zhang; Zhen, Zhang; Ping, Wang

2018-02-01

Bolt joints are common in machine tools and have a direct impact on the overall performance of the tools. Therefore, the understanding of bolt joint characteristics is essential for improving machine design and assembly. Firstly, According to the experimental data obtained from the experiment, the stiffness curve formula was fitted. Secondly, a finite element model of unit bolt joints such as bolt flange joints, bolt head joints, and thread joints was constructed, and lastly the stiffness parameters of joint surfaces were implemented in the model by the secondary development of ABAQUS. The finite element model of the bolt joint established by this method can simulate the contact state very well.

Joint ventures

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret......Afhandlingen analysere de konkurrenceretlige og selskabsretlige regler som er bestemmende for hvordan et joint venture samarbejde er struktureret...

Modulation of shoulder muscle and joint function using a powered upper-limb exoskeleton.

Science.gov (United States)

Wu, Wen; Fong, Justin; Crocher, Vincent; Lee, Peter V S; Oetomo, Denny; Tan, Ying; Ackland, David C

2018-04-27

Robotic-assistive exoskeletons can enable frequent repetitive movements without the presence of a full-time therapist; however, human-machine interaction and the capacity of powered exoskeletons to attenuate shoulder muscle and joint loading is poorly understood. This study aimed to quantify shoulder muscle and joint force during assisted activities of daily living using a powered robotic upper limb exoskeleton (ArmeoPower, Hocoma). Six healthy male subjects performed abduction, flexion, horizontal flexion, reaching and nose touching activities. These tasks were repeated under two conditions: (i) the exoskeleton compensating only for its own weight, and (ii) the exoskeleton providing full upper limb gravity compensation (i.e., weightlessness). Muscle EMG, joint kinematics and joint torques were simultaneously recorded, and shoulder muscle and joint forces calculated using personalized musculoskeletal models of each subject's upper limb. The exoskeleton reduced peak joint torques, muscle forces and joint loading by up to 74.8% (0.113 Nm/kg), 88.8% (5.8%BW) and 68.4% (75.6%BW), respectively, with the degree of load attenuation strongly task dependent. The peak compressive, anterior and superior glenohumeral joint force during assisted nose touching was 36.4% (24.6%BW), 72.4% (13.1%BW) and 85.0% (17.2%BW) lower than that during unassisted nose touching, respectively. The present study showed that upper limb weight compensation using an assistive exoskeleton may increase glenohumeral joint stability, since deltoid muscle force, which is the primary contributor to superior glenohumeral joint shear, is attenuated; however, prominent exoskeleton interaction moments are required to position and control the upper limb in space, even under full gravity compensation conditions. The modeling framework and results may be useful in planning targeted upper limb robotic rehabilitation tasks. Copyright © 2018 Elsevier Ltd. All rights reserved.

Learning to reach by reinforcement learning using a receptive field based function approximation approach with continuous actions.

Science.gov (United States)

Tamosiunaite, Minija; Asfour, Tamim; Wörgötter, Florentin

2009-03-01

Reinforcement learning methods can be used in robotics applications especially for specific target-oriented problems, for example the reward-based recalibration of goal directed actions. To this end still relatively large and continuous state-action spaces need to be efficiently handled. The goal of this paper is, thus, to develop a novel, rather simple method which uses reinforcement learning with function approximation in conjunction with different reward-strategies for solving such problems. For the testing of our method, we use a four degree-of-freedom reaching problem in 3D-space simulated by a two-joint robot arm system with two DOF each. Function approximation is based on 4D, overlapping kernels (receptive fields) and the state-action space contains about 10,000 of these. Different types of reward structures are being compared, for example, reward-on- touching-only against reward-on-approach. Furthermore, forbidden joint configurations are punished. A continuous action space is used. In spite of a rather large number of states and the continuous action space these reward/punishment strategies allow the system to find a good solution usually within about 20 trials. The efficiency of our method demonstrated in this test scenario suggests that it might be possible to use it on a real robot for problems where mixed rewards can be defined in situations where other types of learning might be difficult.

Sweden's first national report under the Joint Convention on the safety of spent fuel management and on the safety of radioactive waste management. Swedish implementation of the obligations of the Joint Convention

International Nuclear Information System (INIS)

2003-01-01

This report is issued according to Article 32 of the Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management. Sweden signed the Joint Convention September 29, 1997 and the Joint Convention entered into force on June 18, 2001. The areas covered by the Joint Convention have been incorporated in the Swedish system for spent fuel and radioactive waste management for a long time. The Swedish Government considered at the time of signing of the Joint Convention that the safety philosophy, legislation and the safety work conducted by the licensees and the authorities in Sweden complied with the obligations of the Convention. This is confirmed in the present report. The Swedish Government directed the Swedish Nuclear Power Inspectorate (SKI) to prepare this report in co-operation with the Swedish Radiation Protection Authority (SSI). A working group of five persons, with representatives from SKI, SSI and the Swedish Nuclear Fuel and Waste Management Co. (SKB), has prepared this report. The report has been discussed in the boards of SKI and SSI. The Swedish Government adopted the report in April 2003. Section A of this report provides an overview of the Swedish nuclear waste programme, including a brief historical review, in order to give the reader a background to the current programme for the management of spent fuel and radioactive waste. Sections B to J provide information on which the conclusions are drawn about the compliance with the obligations of the Joint Convention. By necessity this information is rather brief and strongly focused on those aspects which are addressed in the articles. Too many details and additional information would over-load the report and make the review process difficult. The goal has been to provide enough details to make the Swedish practices understandable. Data that might be missing will be added on request as a part of the review process. Article 32 of the Joint Convention calls for a self

Asymmetric biotic interactions and abiotic niche differences revealed by a dynamic joint species distribution model.

Science.gov (United States)

Lany, Nina K; Zarnetske, Phoebe L; Schliep, Erin M; Schaeffer, Robert N; Orians, Colin M; Orwig, David A; Preisser, Evan L

2018-05-01

A species' distribution and abundance are determined by abiotic conditions and biotic interactions with other species in the community. Most species distribution models correlate the occurrence of a single species with environmental variables only, and leave out biotic interactions. To test the importance of biotic interactions on occurrence and abundance, we compared a multivariate spatiotemporal model of the joint abundance of two invasive insects that share a host plant, hemlock woolly adelgid (HWA; Adelges tsugae) and elongate hemlock scale (EHS; Fiorina externa), to independent models that do not account for dependence among co-occurring species. The joint model revealed that HWA responded more strongly to abiotic conditions than EHS. Additionally, HWA appeared to predispose stands to subsequent increase of EHS, but HWA abundance was not strongly dependent on EHS abundance. This study demonstrates how incorporating spatial and temporal dependence into a species distribution model can reveal the dependence of a species' abundance on other species in the community. Accounting for dependence among co-occurring species with a joint distribution model can also improve estimation of the abiotic niche for species affected by interspecific interactions. © 2018 by the Ecological Society of America.

A New Method for Determination of Joint Roughness Coefficient of Rock Joints

Directory of Open Access Journals (Sweden)

Shigui Du

2015-01-01

Full Text Available The joint roughness coefficient (JRC of rock joints has the characteristic of scale effect. JRC measured on small-size exposed rock joints should be evaluated by JRC scale effect in order to obtain the JRC of actual-scale rock joints, since field rock joints are hardly fully exposed or well saved. Based on the validity analysis of JRC scale effect, concepts of rate of JRC scale effect and effective length of JRC scale effect were proposed. Then, a graphic method for determination of the effective length of JRC scale effect was established. Study results show that the JRC of actual-scale rock joints can be obtained through a fractal model of JRC scale effect according to the statistically measured results of the JRC of small-size partial exposed rock joints and by the selection of fractal dimension of JRC scale effect and the determination of effective length of JRC scale effect.

Action without frontiers. SADC meeting.

Science.gov (United States)

Klouda, T

1997-02-01

The factors which affect AIDS and the transmission of HIV transcend national, racial, cultural, religious, political, and programmatic boundaries. The European Union and the Southern African Development Community (SADC) jointly held a conference in Lilongwe, Malawi, during December 4-6 to bring together senior officials from a wide range of development sectors in the 12 countries of the SADC region to examine the potential for regional, comprehensive action on relevant issues. Conference outcomes will be reviewed and agreed upon at a future regional ministerial meeting. Origins of the conference, innovative aspects of the conference, and regional and sectoral involvement are discussed. Employment, mining, medical drugs, education, and tourism were discussed extensively at the conference as separate sectors.

Quick-Reaction Report on the Audit of ReCoupment Actions on Medicine Payments to Uniformed Services Treatment Facilities.

Science.gov (United States)

1993-07-21

OFFICE OF THE INSPECTOR GENERAL QUICK-REACTION REPORT ON THE AUDIT OF RECOUPMENT ACTIONS ON MEDICARE PAYMENTS TO UNIFORMED SERVICES TREATMENT...Quick-Reaction Report on the Audit of Recoupment Actions on Medicare Payments to Uniformed Services Treatment Facilities (Report No. 93-150) We are...Inspectors General will provide a joint report to the congressional committees that requested the audit . The courtesies extended to the audit staff

Sustaining Collective Action in Urbanizing China

DEFF Research Database (Denmark)

Kuang, Xianwen; Goebel, Christian

2013-01-01

The recent years have seen a proliferation of scholarship on protests and other forms of collective action in China. Important insights have been gained into how conflicts between social groups and local governments begin, which strategies and instruments protesters apply, and under which...... challenges of sustaining collective action in China: the continuing existence of substantial grievances, the re-activation of strong social ties, the presence of unifying frames and an adaptive protest leadership. The comparison shows that especially the last factor is crucial: while the two villages were...... similar in all other respects, leadership in Village B was far more adaptive in Village A, which goes a long way towards explaining why collective action could be sustained twice as long in Village B....

77 FR 12063 - Joint Meeting of the Anti-Infective Drugs Advisory Committee and the Nonprescription Drugs...

Science.gov (United States)

2012-02-28

... DEPARTMENT OF HEALTH AND HUMAN SERVICES Food and Drug Administration [Docket No. FDA-2012-N-0001] Joint Meeting of the Anti-Infective Drugs Advisory Committee and the Nonprescription Drugs Advisory Committee; Notice of Meeting AGENCY: Food and Drug Administration, HHS. ACTION: Notice. This notice announces a forthcoming meeting of a public...

Improved actions for QCD thermodynamics on the lattice

CERN Document Server

Beinlich, B; Laermann, E

1996-01-01

Finite cut-off effects strongly influence the thermodynamics of lattice regularized QCD at high temperature in the standard Wilson formulation. We analyze the reduction of finite cut-off effects in formulations of the thermodynamics of SU(N) gauge theories with three different O(a^2) and O(a^4) improved actions. We calculate the energy density and pressure on finite lattices in leading order weak coupling perturbation theory (T\\rightarrow \\infty) and perform Monte Carlo simulations with improved SU(3) actions at non-zero g^2. Already on lattices with temporal extent N_\\tau=4 we find a strong reduction of finite cut-off effects in the high temperature limit, which persists also down to temperatures a few times the deconfinement transition temperature.

Laboratory characterization of rock joints

International Nuclear Information System (INIS)

Hsiung, S.M.; Kana, D.D.; Ahola, M.P.; Chowdhury, A.H.; Ghosh, A.

1994-05-01

A laboratory characterization of the Apache Leap tuff joints under cyclic pseudostatic and dynamic loads has been undertaken to obtain a better understanding of dynamic joint shear behavior and to generate a complete data set that can be used for validation of existing rock-joint models. Study has indicated that available methods for determining joint roughness coefficient (JRC) significantly underestimate the roughness coefficient of the Apache Leap tuff joints, that will lead to an underestimation of the joint shear strength. The results of the direct shear tests have indicated that both under cyclic pseudostatic and dynamic loadings the joint resistance upon reverse shearing is smaller than that of forward shearing and the joint dilation resulting from forward shearing recovers during reverse shearing. Within the range of variation of shearing velocity used in these tests, the shearing velocity effect on rock-joint behavior seems to be minor, and no noticeable effect on the peak joint shear strength and the joint shear strength for the reverse shearing is observed

National action strategy on global warming

International Nuclear Information System (INIS)

1990-11-01

A document prepared by a committee of Canadian environmental ministries proposes a strategic framework for a national action plan concerning global warming. The strategy would be carried out jointly by governments and all other sectors of the economy, taking into account the present state of scientific knowledge on global warming. Within this framework, the governments in cooperation with interested parties would take certain measures in their respective areas of competence. The main recommendations of the document include the following. The action strategy should comprise 3 elements: limiting emissions of greenhouse gases; forecasting climatic changes which Canada could undergo due to global warming and preparing for such changes; and improving scientific knowledge and the capacity to predict climatic changes. Limitations on this strategy should take into account such matters as the interaction of greenhouse gases with other pollutants, the importance of the international context, the need to adapt to new discoveries, and the importance of regional differences. Implementation of the strategy should incorporate widespread consultation of all affected sectors, sustained work on establishing international conventions and protocols on reducing greenhouse gas emissions, objectives and schedules for such reductions, and stepwise actions to control emissions in order to enable an adequate evaluation of the consequences and effectiveness of such measures. 10 figs., 2 tabs

Effect of steel reinforcement with different degree of corrosion on degeneration of mechanical performance of reinforced concrete frame joints

Directory of Open Access Journals (Sweden)

Wu Xu

2016-02-01

Full Text Available Beam-column joints which shoulders high-level and vertical shearing effect that maintains balance of beam and column end is the major component influencing the performance of the whole framework. Post earthquake investigation suggests that collapse of frame structure is induced by failure of joints in most cases. Thus, beam-column joints must have strong bearing capacity and good ductility, and reinforced concrete structure just meets the above requirement. But corrosion caused by long time use of reinforced concrete framework will lead to degeneration of mechanical performance of joints. To find out the rule of effect of steel reinforcement with different corrosion rate on degeneration of bearing capacity of reinforced concrete framework joints, this study made a nonlinear numerical analysis on fifteen models without stirrup in the core area of reinforced concrete frame joints using displacement method considering axial load ratio of column end and constraint condition. This work aims to find out the key factor that influences mechanical performance of joints, thus to provide a basis for repair and reinforcement of degenerated framework joints.

THE RELATIONSHIP BETWEEN TEMPOROMANDIBULAR-JOINT MOBILITY AND PERIPHERAL JOINT MOBILITY RECONSIDERED

NARCIS (Netherlands)

Dijkstra, P.U.; DEBONT, L.G.M.; VANDERWEELE, L.T.; Boering, G.

The purpose of this paper was to study the relationship between temporomandibular joint (TMJ) mobility and mobility of joints and to study the general character of joint mobility in 83 subjects, 55 females and 28 males (mean age 26.7, range 13-46 years). The subjects were recruited from the

Dual joint space arthrography in temporomandibular joint disorders: Comparison with single inferior joint space arthrography

Energy Technology Data Exchange (ETDEWEB)

Choi, Hyung Sik; Chang, Duk Soo; Lee, Kyung Soo; Kim, Woo Sun; Sung, Jung Ho; Jun, Young Hwan [Capital Armed Forces General Hospital, Seoul (Korea, Republic of)

1989-02-15

The temporomandibular joint(TMJ) is really a complex of two synovial space separated by fibrocartilaginous disc. Single inferior joint space arthrography is commonly performed for evaluation of TMJ disorders, which is known to be superior in demonstrating joint dynamics. But it reveals only the inferior surface of the disc. Therefore, dual space arthrography is superior to demonstrate the soft tissue anatomic feature of the joint such as disc position and shape. Authors performed 83 TMJ arthrograms in TMJ problems. Initially, the inferior joint space was done and then the superior space was sequentially contrasted. The follow results were noted: 1. In all cases, dual space arthrography revealed accurate disc shape and positions. 2. Concordant findings between the two techniques: 68 cases (82%). Discordance between the two techniques: 15 cases (18%) 3. Possible causes of discordance between inferior and dual space arthrography. a) Normal varians of anterior recess: 3 cases b) Posterior disc displacement: 4 cases c) Influence of the patient's head position change :4 cases d) False perforation: 2 cases e) Reduction change: 2 cases 4. In 5 cases with anterior displacement, dual space arthrography gave additional findings such as adhesion within the superior space, which could not be evaluated by single inferior space.

Corrective Action Investigation Plan for Corrective Action Unit 561: Waste Disposal Areas, Nevada Test Site, Nevada, Revision 0

International Nuclear Information System (INIS)

Grant Evenson

2008-01-01

Corrective Action Unit (CAU) 561 is located in Areas 1, 2, 3, 5, 12, 22, 23, and 25 of the Nevada Test Site, which is approximately 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 561 is comprised of the 10 corrective action sites (CASs) listed below: (1) 01-19-01, Waste Dump; (2) 02-08-02, Waste Dump and Burn Area; (3) 03-19-02, Debris Pile; (4) 05-62-01, Radioactive Gravel Pile; (5) 12-23-09, Radioactive Waste Dump; (6) 22-19-06, Buried Waste Disposal Site; (7) 23-21-04, Waste Disposal Trenches; (8) 25-08-02, Waste Dump; (9) 25-23-21, Radioactive Waste Dump; and (10) 25-25-19, Hydrocarbon Stains and Trench. These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives. Additional information will be obtained by conducting a corrective action investigation before evaluating corrective action alternatives and selecting the appropriate corrective action for each CAS. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. The sites will be investigated based on the data quality objectives (DQOs) developed on April 28, 2008, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture; and National Security Technologies, LLC. The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 561. Appendix A provides a detailed discussion of the DQO methodology and the DQOs specific to each CAS. The scope of the Corrective Action Investigation for CAU 561 includes the following activities: (1) Move surface debris and/or materials, as needed, to facilitate sampling. (2) Conduct

Interstitial atoms enable joint twinning and transformation induced plasticity in strong and ductile high-entropy alloys.

Science.gov (United States)

Li, Zhiming; Tasan, Cemal Cem; Springer, Hauke; Gault, Baptiste; Raabe, Dierk

2017-01-12

High-entropy alloys (HEAs) consisting of multiple principle elements provide an avenue for realizing exceptional mechanical, physical and chemical properties. We report a novel strategy for designing a new class of HEAs incorporating the additional interstitial element carbon. This results in joint activation of twinning- and transformation-induced plasticity (TWIP and TRIP) by tuning the matrix phase's instability in a metastable TRIP-assisted dual-phase HEA. Besides TWIP and TRIP, such alloys benefit from massive substitutional and interstitial solid solution strengthening as well as from the composite effect associated with its dual-phase structure. Nanosize particle formation and grain size reduction are also utilized. The new interstitial TWIP-TRIP-HEA thus unifies all metallic strengthening mechanisms in one material, leading to twice the tensile strength compared to a single-phase HEA with similar composition, yet, at identical ductility.

Is cannabis an effective treatment for joint pain?

Science.gov (United States)

Miller, Richard J; Miller, Rachel E

2017-01-01

Cannabis has been used to treat pain for thousands of years. However, since the early part of the 20th century, laws restricting cannabis use have limited its evaluation using modern scientific criteria. Over the last decade, the situation has started to change because of the increased availability of cannabis in the United States for either medical or recreational purposes, making it important to provide the public with accurate information as to the effectiveness of the drug for joint pain among other indications. The major psychotropic component of cannabis is Δ9-tetrahydrocannabinol (THC), one of some 120 naturally occurring phytocannabinoids. Cannabidiol (CBD) is another molecule found in herbal cannabis in large amounts. Although CBD does not produce psychotropic effects, it has been shown to produce a variety of pharmacological effects. Hence, the overall effects of herbal cannabis represent the collective activity of THC, CBD and a number of minor components. The action of THC is mediated by two major G-protein coupled receptors, cannabinoid receptor type 1 (CB1) and CB2, and recent work has suggested that other targets may also exist. Arachidonic acid derived endocannabinoids are the normal physiological activators of the two cannabinoid receptors. Natural phytocannabinoids and synthetic derivatives have produced clear activity in a variety of models of joint pain in animals. These effects are the result of both inhibition of pain pathway signalling (mostly CB1) and anti-inflammatory effects (mostly CB2). There are also numerous anecdotal reports of the effectiveness of smoking cannabis for joint pain. Indeed, it is the largest medical request for the use of the drug. However, these reports generally do not extend to regulated clinical trials for rheumatic diseases. Nevertheless, the preclinical and human data that do exist indicate that the use of cannabis should be taken seriously as a potential treatment of joint pain.

Joint Electromagnetic Spectrum Management Operations

Science.gov (United States)

2012-03-20

promulgate command-specific policy and guidance for EMS use, the joint restricted frequency list (JRFL) process, the joint communications–electronics...joint communications–electronics operating instructions (JCEOI) and joint restricted frequency list (JRFL). Examples of FM include providing the...joint restricted frequency list Figure III-4. Joint Frequency Management Office Spectrum Management Process Chapter III III-10 JP 6-01 assignments

Joint diseases

International Nuclear Information System (INIS)

Weissman, S.D.

1989-01-01

The authors discuss how x-ray examination is essential in the diagnosis and evaluation of the arthritides. Most arthritides are first suspected by the clinician, and x-ray evaluation of these entities along with laboratory testing is important for confirmation of the clinical diagnosis and in staging of the disease process. Several arthritides are often diagnosed first by the podiatrist on x-ray evaluation, including pseudogout, ankylosing spondylitis, early rheumatoid arthritis, degenerative joint disease, and tuberculosis of bone. The joint responds to insult in only a limited number of ways that become apparent on x-ray. The soft tissues surrounding the joint, the articulating bones, and alignment of the joint space may all be involved by the arthritic process. On roentgenographic examination, the soft tissues must be examined for edema, masses, calcifications, and atrophy. The articulating bones must be examined for demineralization, erosions, osteophytes, periosteal reaction, cysts and sclerosis

MR imaging of the normal sacroiliac joint with correlation to histology

Energy Technology Data Exchange (ETDEWEB)

Puhakka, K.B.; Jurik, A.G.; Egund, N. [Department of Radiology, Aarhus University Hospital, Aarhus Kommunehospital, 8000, Aarhus (Denmark); Melsen, F. [Institute of Pathology, Aarhus University Hospital, Aarhus Amtssygehus, Aarhus (Denmark); Boel, L.W.; Vesterby, A. [Institute of Forensic Medicine, University of Aarhus, Aarhus (Denmark)

2004-01-01

The microscopic study of the various components of joints provide a proper basis for understanding the nature of pathologic lesions to which they are subject and their imaging appearances. This study was designed to correlate MR imaging with a systematic histological study of the normal sacroiliac joint (SIJ), which to our knowledge is not available in the literature. Five male cadavers, aged 20 to 45 years, and seven male and seven female volunteers, aged 23 to 44 years, were investigated with oblique transaxial and coronal MR imaging of the SIJs. A variety of sequences including pre- and post-contrast T1 fat-saturated studies in the volunteers were used. Cryosectioning was performed in six SIJs of the five cadavers and compared with the MR images for the microscopic joint anatomy and assessed for the presence of abnormalities resembling those associated with sacroiliitis. Throughout the SIJ, the hyaline cartilage of the sacral bone and the proximal third of the hyaline iliac cartilage was strongly attached to the surrounding stabilizing ligaments, forming wide margins of fibrocartilage. In the distal one-third of the joint only, the margins of the iliac joint facet resemble that of a synovial joint, which include an inner capsule with synovial cells. The MR anatomy of the ventral and dorsal aspects of the SIJ was only adequately visualized at oblique transaxial MR imaging. No contrast enhancement occurred in the synovial tissue or in the cartilaginous joint space. The dorsal transition between the proximal 2/3 and distal 1/3 of the cartilaginous joint was at microscopy rich in anatomical and histological variants, including osseous clefts, cartilage and subchondral defects, and vascular connective tissue in the bone marrow. These were all recognized at oblique transaxial MR imaging and in coronal MR sectioning may resemble abnormalities. Otherwise, no erosions, bone marrow abnormalities, bone sclerosis or abnormal contrast enhancement occurred in the normal

Experience of action depends on intention, not body movement

DEFF Research Database (Denmark)

Jensen, Mads; Vagnoni, Eleonora; Overgaard, Morten

2014-01-01

in memory. We found that recall of a voluntary action was unaffected by an incongruent involuntary movement. In contrast, recall of an involuntary movement was strongly influenced by an incongruent voluntary action. Our results demonstrate an “intentional capture” of body movement by voluntary actions......, in support of intentional theories of agency, but contrary to reconstructive theories. When asked to recall both actions and movements, people's responses are shaped by memory of what they intended to do, rather than by how their body moved....... effects that they produce. Intentions would then be mere confabulations, and not bona fide experiences. Previous work on voluntary action has focused on immediate experiences of authorship, and few studies have considered memory for voluntary actions. We devised an experiment in which both voluntary...

Towards a strong virtue ethics for nursing practice.

Science.gov (United States)

Armstrong, Alan E

2006-07-01

Illness creates a range of negative emotions in patients including anxiety, fear, powerlessness, and vulnerability. There is much debate on the 'therapeutic' or 'helping' nurse-patient relationship. However, despite the current agenda regarding patient-centred care, the literature concerning the development of good interpersonal responses and the view that a satisfactory nursing ethics should focus on persons and character traits rather than actions, nursing ethics is dominated by the traditional obligation, act-centred theories such as consequentialism and deontology. I critically examine these theories and the role of duty-based notions in both general ethics and nursing practice. Because of well-established flaws, I conclude that obligation-based moral theories are incomplete and inadequate for nursing practice. I examine the work of Hursthouse on virtue ethics' action guidance and the v-rules. I argue that the moral virtues and a strong (action-guiding) version of virtue ethics provide a plausible and viable alternative for nursing practice. I develop an account of a virtue-based helping relationship and a virtue-based approach to nursing. The latter is characterized by three features: (1) exercising the moral virtues such as compassion; (2) using judgement; and (3) using moral wisdom, understood to include at least moral perception, moral sensitivity, and moral imagination. Merits and problems of the virtue-based approach are examined. I relate the work of MacIntyre to nursing and I conceive nursing as a practice: nurses who exercise the virtues and seek the internal goods help to sustain the practice of nursing and thus prevent the marginalization of the virtues. The strong practice-based version of virtue ethics proposed is context-dependent, particularist, and relational. Several areas for future philosophical inquiry and empirical nursing research are suggested to develop this account yet further.

European network for Health Technology Assessment Joint Action (EUnetHTA JA): a process evaluation performed by questionnaires and documentary analysis.

Science.gov (United States)

Woodford Guegan, Eleanor; Cook, Andrew

2014-06-01

The European network for Health Technology Assessment Joint Action (EUnetHTA JA) project's overarching objective was to 'establish an effective and sustainable HTA [Health technology assessment] collaboration in Europe that brings added value at the regional, national and European level'. Specific objectives were to develop a strategy and business model for sustainable European collaboration on HTA, develop HTA tools and methods and promote good practice in HTA methods and processes. We describe activities performed on behalf of the National Institute for Health Research HTA programme; evaluating the project processes and developing a data set for a registry of planned clinical studies of relevance to public funders. Annual self-completion online questionnaires were sent to project participants and external stakeholders to identify their views about the project processes. Documentary review was undertaken at the project end on the final technical reports from the work packages to examine whether or not their deliverables had been achieved. The project's impact was assessed by whether or not the deliverables were produced, the objectives met and additional 'added value' generated. The project's effectiveness was evaluated by its processes, communication, administration, workings of individual work packages and involvement of external stakeholders. A two-stage Delphi exercise was undertaken to identify the data elements that should be included in a registry of planned clinical studies of relevance to public funders. The data set was validated by an efficacy testing exercise. High response rates were achieved for the questionnaires sent to project participants and this was attributed to the evidence-based strategy implemented. Response rates to questionnaires sent to external stakeholders were disappointingly lower. Most of the high-level objectives were achieved, although applying the developed tools in practice will be implemented in the European network for Health

23 CFR 450.328 - TIP action by the FHWA and the FTA.

Science.gov (United States)

2010-04-01

... 23 Highways 1 2010-04-01 2010-04-01 false TIP action by the FHWA and the FTA. 450.328 Section 450... by the FHWA and the FTA. (a) The FHWA and the FTA shall jointly find that each metropolitan TIP is... transportation plan by the FHWA and the FTA, and upon other reviews as deemed necessary by the FHWA and the FTA...

Imaging findings of charcot joint

International Nuclear Information System (INIS)

Meng Quanfei; Zhou Chunxiang; Chen Yingming; Jiang Bo

2003-01-01

Objective: To analyze the MRI characters of Charcot joint, and to evaluate the diagnostic value of X-ray, CT, and MRI on Charcot joint. Methods: Eight patients with 8 Charcot joints underwent X-ray, CT, and MR examinations. 6 of them had syringomyelia, 1 patient had injury of the spinal cord, and 1 case had diabetes. All 8 patients had sensory reduction or deficit in the sick extremities. Results: There were two types of Charcot joint, hypertrophic and atrophic. Radiographic and CT features of hypertrophic joint (n=3) showed hyperostotic osteosclerosis and mammoth osteophytes in the sick bones, periarticular ossification, and articular disorganization. Radiographic and CT features of atrophic joint (n=5) showed extensive bone resorption (destruction), periarticular debris, and articular disorganization. Main MRI features of Charcot joint included hydrarthrosis within joint capsule, thickened, loose, and elongated joint capsule with para-joint, peri-diaphysis, and inter-muscular extension in a pseudopodia pattern. The irregular joint capsule wall was presented as mild hypointensity on T 1 WI, slight hyper-intensity on T 2 WI, and was markedly enhanced after Gd-DTPA was administrated, which was considered as a characteristic manifestation of the lesion. Soft tissue mass containing hypo-intense stripes on both T 1 WI and T 2 WI was commonly noted adjacent to the involved joint. Conclusion: X-rays plain film is the first choice for the diagnosis of Charcot joint, and MRI is pretty useful in the diagnosis of Charcot joint

Action plan against declining vineyards: An innovative approach

Directory of Open Access Journals (Sweden)

Riou Christophe

2016-01-01

Full Text Available Declining vineyards are assessed by a multi-year decrease in vine productivity and/or its sudden premature or gradual death, based on multiple factors. Since 2015, the French wine sector has been working on an original study to identify new research avenues while launching an innovative action plan to combat vineyard decline. First, a statistical analysis enabled to estimate research efforts in the different countries. 70 factors susceptible to contribute to vineyard decline were then identified by analyzing more than 500 publications. These factors are biological, physical or linked to growing practices. While the role of pathogens is fairly well-known, the impact of the land plot or the soil on decline is less understood. Secondly, a prospective methodology was used to better identify viticulture system factors and levers affecting vines. It was thus demonstrated that yield and longevity are strongly linked to agronomy, economic variables and plant matter, plant physiology, disease, etc... These are the key issues and leverage actions to combat more strongly vineyard decline. The matrix analysis was then complemented by interviews and statistical data to imagine leverage actions. The strategic action plan is focused on four objectives: promoting training of good practices, improving plant production organization, developing vineyard observation networks, implementing an innovative research plan.

Perception-Action in children with ASD

Directory of Open Access Journals (Sweden)

Claes eVon Hofsten

2012-12-01

Full Text Available How do disturbances to perception and action relate to the deficiencies expressed by children with autism? The ability to predict what is going to happen next is crucial for the construction of all actions and children develop these predictive abilities early in development. Children with autism, however, are deficient in the ability to foresee future events and to plan movements and movement sequences. They are also deficient in the understanding of other people’s actions. This includes communicative actions as they are ultimately based on movements. Today there are two promising neurobiological interpretation of ASD. First, there is strong evidence that the Mirror Neuron System (MNS is impaired. As stated by this hypothesis, action production and action understanding are intimately related. Both these functions rely on predictive models of the sensory consequences of actions and depend on connectivity between the parietal and pre-motor areas. Secondly, action prediction is accomplished through a system that includes a loop from the posterior parietal cortex through the cerebellum and back to the premotor and motor areas of the brain. Impairment of this loop is probably also part of the explanation of the prediction problems in children with ASD. Both the cortico-cerebellar loop and the MNS rely on distant neural connections. There are multiple evidence that such connections are weak in children with autism.

Corrective Action Decision Document/Corrective Action Plan for Corrective Action Unit 104: Area 7 Yucca Flat Atmospheric Test Sites Nevada National Security Site, Nevada, Revision 0

Energy Technology Data Exchange (ETDEWEB)

Patrick Matthews

2012-10-01

CAU 104 comprises the following corrective action sites (CASs): • 07-23-03, Atmospheric Test Site T-7C • 07-23-04, Atmospheric Test Site T7-1 • 07-23-05, Atmospheric Test Site • 07-23-06, Atmospheric Test Site T7-5a • 07-23-07, Atmospheric Test Site - Dog (T-S) • 07-23-08, Atmospheric Test Site - Baker (T-S) • 07-23-09, Atmospheric Test Site - Charlie (T-S) • 07-23-10, Atmospheric Test Site - Dixie • 07-23-11, Atmospheric Test Site - Dixie • 07-23-12, Atmospheric Test Site - Charlie (Bus) • 07-23-13, Atmospheric Test Site - Baker (Buster) • 07-23-14, Atmospheric Test Site - Ruth • 07-23-15, Atmospheric Test Site T7-4 • 07-23-16, Atmospheric Test Site B7-b • 07-23-17, Atmospheric Test Site - Climax These 15 CASs include releases from 30 atmospheric tests conducted in the approximately 1 square mile of CAU 104. Because releases associated with the CASs included in this CAU overlap and are not separate and distinguishable, these CASs are addressed jointly at the CAU level. The purpose of this CADD/CAP is to evaluate potential corrective action alternatives (CAAs), provide the rationale for the selection of recommended CAAs, and provide the plan for implementation of the recommended CAA for CAU 104. Corrective action investigation (CAI) activities were performed from October 4, 2011, through May 3, 2012, as set forth in the CAU 104 Corrective Action Investigation Plan.

A STUDY ON OSTEOARTHRITIS OF KNEE JOINT

Directory of Open Access Journals (Sweden)

Ayyappan Nair

2016-09-01

Clinical Examination the symptoms that was found highest in frequency was tenderness in one ninety six cases, Limitation of joint movements in one hundred seventy three cases, crepitus in twenty five cases and gross deformation in fifteen cases. The association of investigations showed strong significance with the positivity. Subchondral sclerosis was present in forty eight cases, narrowing of joint space on X-ray was seen in two hundred and seventeen cases, osteophyte formation/ subchondral cyst was observed in twenty five cases. Deformation of joint and loose bodies was observed in twelve cases. On treatment osteotomy was successful in forty nine cases, medical line of treatment was successful or at least stopped the progression of the disease in two hundred two cases. Arthroscopic procedure was successful in twenty cases and joint replacement in eleven cases. CONCLUSION The study successfully evaluates the different signs and symptoms that are commonly involved in osteoarthritis. In the present study we also were successful in showing the association of different investigations and modes of treatment in successfully treating the cases of osteoarthritis.

Formation of tough composite joints

International Nuclear Information System (INIS)

Brun, M.K.

1997-05-01

Joints which exhibit tough fracture behavior were formed in a composite with a Si/SiC matrix reinforced with Textron SCS-6 fibers with either boron nitride or silicon nitride fiber coatings. In composites with BN coatings fibers were aligned uniaxially, while composites with Si 3 N 4 -coated fibers had a 0/90 degree architecture. Lapped joints (joints with overlapping fingers) were necessary to obtain tough behavior. Geometrical requirements necessary to avoid brittle joint failure have been proposed. Joints with a simple overlap geometry (only a few fingers) would have to be very long in order to prevent brittle failure. Typical failure in these joints is caused by a crack propagating along the interfaces between the joint fingers. Joints of the same overall length, but with geometry changed to be symmetric about the joint centerline and with an extra shear surface exhibited tough fractures accompanied with extensive fiber pullout. The initial matrix cracking of these joints was relatively low because cracks propagated easily through the ends of the fingers. Joints with an optimized stepped sawtooth geometry produced composite-like failures with the stress/strain curves containing an elastic region followed by a region of rising stress with an increase of strain. Increasing the fiber/matrix interfacial strength from 9 to 25 MPa, by changing the fiber coating, increased matrix cracking and ultimate strength of the composite significantly. The best joints had matrix cracking stress and ultimate strength of 138 and 240 MPa, respectively. Joint failure was preceded by multiple matrix cracking in the entire composite. The high strength of the joints will permit building of structures containing joints with only a minor reduction of design stresses

PPARγ partial agonist GQ-16 strongly represses a subset of genes in 3T3-L1 adipocytes

Energy Technology Data Exchange (ETDEWEB)

Milton, Flora Aparecida [Faculdade de Ciências da Saúde, Laboratório de Farmacologia Molecular, Universidade de Brasília (Brazil); Genomic Medicine, Houston Methodist Research Institute, Houston, TX (United States); Cvoro, Aleksandra [Genomic Medicine, Houston Methodist Research Institute, Houston, TX (United States); Amato, Angelica A. [Faculdade de Ciências da Saúde, Laboratório de Farmacologia Molecular, Universidade de Brasília (Brazil); Sieglaff, Douglas H.; Filgueira, Carly S.; Arumanayagam, Anithachristy Sigamani [Genomic Medicine, Houston Methodist Research Institute, Houston, TX (United States); Caro Alves de Lima, Maria do; Rocha Pitta, Ivan [Laboratório de Planejamento e Síntese de Fármacos – LPSF, Universidade Federal de Pernambuco (Brazil); Assis Rocha Neves, Francisco de [Faculdade de Ciências da Saúde, Laboratório de Farmacologia Molecular, Universidade de Brasília (Brazil); Webb, Paul, E-mail: pwebb@HoustonMethodist.org [Genomic Medicine, Houston Methodist Research Institute, Houston, TX (United States)

2015-08-28

Thiazolidinediones (TZDs) are peroxisome proliferator-activated receptor gamma (PPARγ) agonists that improve insulin resistance but trigger side effects such as weight gain, edema, congestive heart failure and bone loss. GQ-16 is a PPARγ partial agonist that improves glucose tolerance and insulin sensitivity in mouse models of obesity and diabetes without inducing weight gain or edema. It is not clear whether GQ-16 acts as a partial agonist at all PPARγ target genes, or whether it displays gene-selective actions. To determine how GQ-16 influences PPARγ activity on a gene by gene basis, we compared effects of rosiglitazone (Rosi) and GQ-16 in mature 3T3-L1 adipocytes using microarray and qRT-PCR. Rosi changed expression of 1156 genes in 3T3-L1, but GQ-16 only changed 89 genes. GQ-16 generally showed weak effects upon Rosi induced genes, consistent with partial agonist actions, but a subset of modestly Rosi induced and strongly repressed genes displayed disproportionately strong GQ-16 responses. PPARγ partial agonists MLR24 and SR1664 also exhibit disproportionately strong effects on transcriptional repression. We conclude that GQ-16 displays a continuum of weak partial agonist effects but efficiently represses some negatively regulated PPARγ responsive genes. Strong repressive effects could contribute to physiologic actions of GQ-16. - Highlights: • GQ-16 is an insulin sensitizing PPARγ ligand with reduced harmful side effects. • GQ-16 displays a continuum of weak partial agonist activities at PPARγ-induced genes. • GQ-16 exerts strong repressive effects at a subset of genes. • These inhibitor actions should be evaluated in models of adipose tissue inflammation.

PPARγ partial agonist GQ-16 strongly represses a subset of genes in 3T3-L1 adipocytes

International Nuclear Information System (INIS)

Milton, Flora Aparecida; Cvoro, Aleksandra; Amato, Angelica A.; Sieglaff, Douglas H.; Filgueira, Carly S.; Arumanayagam, Anithachristy Sigamani; Caro Alves de Lima, Maria do; Rocha Pitta, Ivan; Assis Rocha Neves, Francisco de; Webb, Paul

2015-01-01

Thiazolidinediones (TZDs) are peroxisome proliferator-activated receptor gamma (PPARγ) agonists that improve insulin resistance but trigger side effects such as weight gain, edema, congestive heart failure and bone loss. GQ-16 is a PPARγ partial agonist that improves glucose tolerance and insulin sensitivity in mouse models of obesity and diabetes without inducing weight gain or edema. It is not clear whether GQ-16 acts as a partial agonist at all PPARγ target genes, or whether it displays gene-selective actions. To determine how GQ-16 influences PPARγ activity on a gene by gene basis, we compared effects of rosiglitazone (Rosi) and GQ-16 in mature 3T3-L1 adipocytes using microarray and qRT-PCR. Rosi changed expression of 1156 genes in 3T3-L1, but GQ-16 only changed 89 genes. GQ-16 generally showed weak effects upon Rosi induced genes, consistent with partial agonist actions, but a subset of modestly Rosi induced and strongly repressed genes displayed disproportionately strong GQ-16 responses. PPARγ partial agonists MLR24 and SR1664 also exhibit disproportionately strong effects on transcriptional repression. We conclude that GQ-16 displays a continuum of weak partial agonist effects but efficiently represses some negatively regulated PPARγ responsive genes. Strong repressive effects could contribute to physiologic actions of GQ-16. - Highlights: • GQ-16 is an insulin sensitizing PPARγ ligand with reduced harmful side effects. • GQ-16 displays a continuum of weak partial agonist activities at PPARγ-induced genes. • GQ-16 exerts strong repressive effects at a subset of genes. • These inhibitor actions should be evaluated in models of adipose tissue inflammation

Problems of assessment of efficiency of managing corporate rights in joint stock companies

Directory of Open Access Journals (Sweden)

Kurinnyy Oleksandr V.

2013-03-01

Full Text Available The goal of the article lies in identification of specific features of formation, implementation and practical use of the balanced scorecard of efficiency of managing corporate rights in domestic joint stock companies. Complexity of formation of the balanced scorecard of efficiency of managing property of shareholders is due to a necessity of ensuring deliberateness of the combination of financial and non-financial indicators for formalisation of managerial goals, establishment of a connection between financial parameters and operation indicators of enterprise activity and also attempt to determine the whole cost of an enterprise, which would be adequate to the market value of its assets. Taking into account the above, the article defines efficiency of managing shares of the joint stock as the degree of correlation between the goal, regulatory set functions, managerial actions and results of execution of managerial duties by managers. Prospect of further studies in this direction is development of methodical basis of formation and functioning of the balanced scorecard of efficiency of the use of shares of corporate rights in a joint stock company.

Multiple modes of action potential initiation and propagation in mitral cell primary dendrite

DEFF Research Database (Denmark)

Chen, Wei R; Shen, Gongyu Y; Shepherd, Gordon M

2002-01-01

recordings with computational modeling to analyze action-potential initiation and propagation in the primary dendrite. In response to depolarizing current injection or distal olfactory nerve input, fast Na(+) action potentials were recorded along the entire length of the primary dendritic trunk. With weak......-to-moderate olfactory nerve input, an action potential was initiated near the soma and then back-propagated into the primary dendrite. As olfactory nerve input increased, the initiation site suddenly shifted to the distal primary dendrite. Multi-compartmental modeling indicated that this abrupt shift of the spike......-initiation site reflected an independent thresholding mechanism in the distal dendrite. When strong olfactory nerve excitation was paired with strong inhibition to the mitral cell basal secondary dendrites, a small fast prepotential was recorded at the soma, which indicated that an action potential was initiated...

Gauge-invariant master field in U(∞) LGT: A pathway from the strong to weak coupling phases

International Nuclear Information System (INIS)

Kazakov, V.A.; Migdal, A.A.

1987-01-01

We propose and test a new computational method for SU(∞) lattice gauge and spin theories. It is based on calculation of the effective action depending only on N (rather than N 2 ) gauge invariant degrees of freedom, by means of some modification of the strong coupling expansion. We show using the example of a one-plaquette model that the stationary point equation for this action describes the weak coupling phase as well as the strong coupling phase. It is argued that such an equation predicts a phase transition for D-dimensional gauge theory, in accordance with Monte Carlo data. (orig.)

Microstructure examination and microhardness of friction stir welded joint of (AA7020-O after PWHT

Directory of Open Access Journals (Sweden)

Ghada M.F. Essa

2018-04-01

Full Text Available This paper studies the microstructure and microhardness of the welded joints of the annealed aluminum alloy AA7020-O produced by friction stir welding (FSW technique. The material was applied to post weld heat treatment (solution treatment and artificially aged, T6. The traverse speed and the rotational speed are the most important process parameters of FSW, and have great influence on the heat input of the welding operation which governs the welded joints quality. To investigate their effect, the welding operation was performed using three traverse speeds, 20, 40 and 60 mm/s with two rotational speeds of 1125 and 1400 rpm, and other welding parameters were kept constant to produce comparable joints. It was found that the two rotational speeds are accepted with lower traverse speeds to produce sound joints. Microstructure of the welded joints was significantly affected by the FSW process parameters, and slight effect was reported for the grain size. Microhardness examination showed high weld joint quality with respect to the base metal hardness, which proves the reprecipitation of the hardening phase in the weld zone. The microhardness profile was strongly dependant on the rotational speed, and the average values of the joints hardness have increased with the decrease in the rotational speed, where it have been slightly affected by the welding speed. Keywords: Friction stir welding, Aluminum alloy, Mechanical properties, Microstructures

77 FR 38088 - Development of the Joint Strategic Plan on Intellectual Property Enforcement; Request of the U.S...

Science.gov (United States)

2012-06-26

... as IPEC develops a new enforcement strategy is divided into three parts. In the first section titled... threats to public health and safety and the U.S. economy resulting from intellectual property infringement... developing new enforcement strategy action items that further the priorities identified in the Joint...

Action-angle variable for the Gel'fand-Dikii flows

International Nuclear Information System (INIS)

Beals, R.; Sattinger, D.H.

1992-01-01

Using the scattering transform for nth order linear scalar operators, the Poisson bracket found by Gel'fans and Dikii, which generalizes the Gardner Poisson bracket for the KdV hierarchy, is computed on the scattering side. Action-angle variables are then constructed. Using this, complete integrability is demonstrated in the strong sense. Real action-angle variables are constructed in the self-adjoint case. (orig.)

Disciplinary action by medical boards and prior behavior in medical school.

Science.gov (United States)

Papadakis, Maxine A; Teherani, Arianne; Banach, Mary A; Knettler, Timothy R; Rattner, Susan L; Stern, David T; Veloski, J Jon; Hodgson, Carol S

2005-12-22

Evidence supporting professionalism as a critical measure of competence in medical education is limited. In this case-control study, we investigated the association of disciplinary action against practicing physicians with prior unprofessional behavior in medical school. We also examined the specific types of behavior that are most predictive of disciplinary action against practicing physicians with unprofessional behavior in medical school. The study included 235 graduates of three medical schools who were disciplined by one of 40 state medical boards between 1990 and 2003 (case physicians). The 469 control physicians were matched with the case physicians according to medical school and graduation year. Predictor variables from medical school included the presence or absence of narratives describing unprofessional behavior, grades, standardized-test scores, and demographic characteristics. Narratives were assigned an overall rating for unprofessional behavior. Those that met the threshold for unprofessional behavior were further classified among eight types of behavior and assigned a severity rating (moderate to severe). Disciplinary action by a medical board was strongly associated with prior unprofessional behavior in medical school (odds ratio, 3.0; 95 percent confidence interval, 1.9 to 4.8), for a population attributable risk of disciplinary action of 26 percent. The types of unprofessional behavior most strongly linked with disciplinary action were severe irresponsibility (odds ratio, 8.5; 95 percent confidence interval, 1.8 to 40.1) and severely diminished capacity for self-improvement (odds ratio, 3.1; 95 percent confidence interval, 1.2 to 8.2). Disciplinary action by a medical board was also associated with low scores on the Medical College Admission Test and poor grades in the first two years of medical school (1 percent and 7 percent population attributable risk, respectively), but the association with these variables was less strong than that with

Multi-Scale Computational Modeling of Ni-Base Superalloy Brazed Joints for Gas Turbine Applications

Science.gov (United States)

Riggs, Bryan

Brazed joints are commonly used in the manufacture and repair of aerospace components including high temperature gas turbine components made of Ni-base superalloys. For such critical applications, it is becoming increasingly important to account for the mechanical strength and reliability of the brazed joint. However, material properties of brazed joints are not readily available and methods for evaluating joint strength such as those listed in AWS C3.2 have inherent challenges compared with testing bulk materials. In addition, joint strength can be strongly influenced by the degree of interaction between the filler metal (FM) and the base metal (BM), the joint design, and presence of flaws or defects. As a result, there is interest in the development of a multi-scale computational model to predict the overall mechanical behavior and fitness-for-service of brazed joints. Therefore, the aim of this investigation was to generate data and methodology to support such a model for Ni-base superalloy brazed joints with conventional Ni-Cr-B based FMs. Based on a review of the technical literature a multi-scale modeling approach was proposed to predict the overall performance of brazed joints by relating mechanical properties to the brazed joint microstructure. This approach incorporates metallurgical characterization, thermodynamic/kinetic simulations, mechanical testing, fracture mechanics and finite element analysis (FEA) modeling to estimate joint properties based on the initial BM/FM composition and brazing process parameters. Experimental work was carried out in each of these areas to validate the multi-scale approach and develop improved techniques for quantifying brazed joint properties. Two Ni-base superalloys often used in gas turbine applications, Inconel 718 and CMSX-4, were selected for study and vacuum furnace brazed using two common FMs, BNi-2 and BNi-9. Metallurgical characterization of these brazed joints showed two primary microstructural regions; a soft

U.S. Continuing Involvement with the Joint Convention

International Nuclear Information System (INIS)

Stewart, L.; Tonkay, D.; Regnier, E.; Schultheisz, D.; Gnugnoli, G.

2009-01-01

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) is an international convention, under the auspices of the International Atomic Energy Agency (IAEA). It is a companion to a suite of international conventions on nuclear safety and physical security, which serve to promote a global culture for the safe use of radioactive materials. The Joint Convention is an official international treaty, and as such, there are obligations on the part of the United States. Those nations having ratified the Joint Convention are designated as 'Contracting Parties.' Nations that are not IAEA Member States may also become Contracting Parties to the Joint Convention, although none has done so. The primary obligations are threefold. The first is to prepare a national report, which addresses the national safety program in radioactive waste management, spent nuclear fuel management, and disused sealed sources. As the U.S. prepares a national report, other Contracting Parties to the Joint Convention also prepare their national reports, which leads to the second obligation on the part of the Contracting Parties. This is the obligation to review other countries' national reports. The last specific obligation is to actively participate in the triennial peer review meeting, referred to as the Review Meeting of the Contracting Parties. The U.S. ratified the Joint Convention in 2003, just prior to the First Review Meeting of the Contracting Parties, and has participated fully therein in the ensuing Review Meetings. Because of the benefits in active participation, it is important for the U.S. to maintain its leadership role in promoting its ratification in the global setting, as well as in more focused regions. Because of the important benefits associated with active participation, the U.S. has strongly supported a Regional Conference Initiative outreach program to increase membership. To launch the Initiative, the U

From action planning and plan enactment to fruit consumption: moderated mediation effects.

Science.gov (United States)

Kasten, Stefanie; van Osch, Liesbeth; Eggers, Sander Matthijs; de Vries, Hein

2017-10-23

Sufficient fruit consumption is beneficial for a healthy live. While many Dutch adults intent to eat the recommended amount of fruit, only 5-10% of the population actually adheres to the recommendation. One mechanism that can help to narrow this gap between intention and actual fruit consumption is action planning. However, action planning is only assumed to be effective if plans are enacted. This study assessed which action plans are made and enacted, and further aimed to investigate two main hypotheses: 1. the effect of action planning (at T1) on fruit consumption (at T2) is mediated by plan enactment (at T3); 2. positive intentions (2a), high self-efficacy (2b) and a strong habit to eat fruit (2c) enhance the mediation of plan enactment, whereas a strong habit to eat snacks (2d) hinders the mediation of plan enactment. This study was a self-reported longitudinal online survey study. A total of 428 participants filled in a survey, measuring demographic factors (e.g. gender, age, education level), several socio-cognitive constructs (i.e. attitudes, self-efficacy, habit, action planning, plan enactment), and fruit consumption, at three points in time (baseline, after 1 month, and after 3 months). Mediation and moderated mediation analyses were used to investigate the planning-plan enactment- fruit consumption relationship. Up to 70% of the participants reported to have enacted their T1 action plans at T2. Action planning on fruit consumption was fully mediated by plan enactment (Hypothesis 1). All four proposed moderators (i.e. intention, self-efficacy, habit to consume fruit, and habit to consume snacks) significantly influenced the mediation (Hypotheses 2a-2d). Mediation of plan enactment was only present with high levels of intention, high levels of self-efficacy, strong habits to eat fruit, and weak habits to eat snacks. The study suggests the importance of plan enactment for fruit consumption. Furthermore, it emphasizes the necessity of facilitating factors

Experimental joint immobilization in guinea pigs. Effects on the knee joint

Science.gov (United States)

Marcondesdesouza, J. P.; Machado, F. F.; Sesso, A.; Valeri, V.

1980-01-01

In young and adult guinea pigs, the aftermath experimentally induced by the immobilization of the knee joint in hyperextended forced position was studied. Joint immobilization which varied from one to nine weeks was attained by plaster. Eighty knee joints were examined macro and microscopically. Findings included: (1) muscular hypotrophy and joint stiffness in all animals, directly proportional to the length of immobilization; (2) haemoarthrosis in the first week; (3) intra-articular fibrous tissue proliferation ending up with fibrous ankylosis; (4) hyaline articular cartilage erosions; (5) various degrees of destructive menisci changes. A tentative explanation of the fibrous tissue proliferation and of the cartilage changes is offered.

Prosthesis of the wrist-joint

Energy Technology Data Exchange (ETDEWEB)

Feldmeier, C.

1983-02-25

Function of the hand-joint and the well-being of patients can be severely affected by arthrosis of the wrist-joint. Therapeutically, arthrodesis usually results in a painfree status of stiffness. A painless and well functioning joint can be achieved by alloplastic joint replacement or resurfacing. The possibilities and clinical results in cases of arthrosis of the carpo-metacarpal joint of the thumb, pseudarthrosis of the scaphoid, aseptic necrosis of the Lunate and severe arthrosis of the radio-carpal joint are demonstrated.

Vastus Medialis advancement: clinical results and correlation with tangential X-rays of the patellofemoral joint

International Nuclear Information System (INIS)

O'Beirne, J.; O'Connell, R.J.; White, M.

1986-01-01

Thirteen patients who had recurrent dislocation of the patella treated by vastus medialis advancement were reviewed, and tangential X-rays of the patellofemoral joint were taken at the time of review. Clinically the results were excellent or good in ten (77%). However, the X-ray appearances were similar to what would be expected in a group of patients with untreated recurrent dislocation, probably because the corrective action of the vastus medialis did not apply with the quadriceps relaxed for X-ray. We conclude that vastus medialis advancement is a successful operation for recurrent patellar dislocation but that tangential X-rays of the patellofemoral joint are not an indicator of the outcome of surgery. (author)

Exemplar-based human action pose correction.

Science.gov (United States)

Shen, Wei; Deng, Ke; Bai, Xiang; Leyvand, Tommer; Guo, Baining; Tu, Zhuowen

2014-07-01

The launch of Xbox Kinect has built a very successful computer vision product and made a big impact on the gaming industry. This sheds lights onto a wide variety of potential applications related to action recognition. The accurate estimation of human poses from the depth image is universally a critical step. However, existing pose estimation systems exhibit failures when facing severe occlusion. In this paper, we propose an exemplar-based method to learn to correct the initially estimated poses. We learn an inhomogeneous systematic bias by leveraging the exemplar information within a specific human action domain. Furthermore, as an extension, we learn a conditional model by incorporation of pose tags to further increase the accuracy of pose correction. In the experiments, significant improvements on both joint-based skeleton correction and tag prediction are observed over the contemporary approaches, including what is delivered by the current Kinect system. Our experiments for the facial landmark correction also illustrate that our algorithm can improve the accuracy of other detection/estimation systems.

U.S. Perspectives on the Joint Convention

International Nuclear Information System (INIS)

Strosnider, J.; Federline, M.; Camper, L.; Abu-Eid, R.; Gnugnoli, G.; Gorn, J.; Bubar, P.; Tonkay, D.

2006-01-01

The Joint Convention on the Safety of Spent Fuel Management and on the Safety of Radioactive Waste Management (Joint Convention) is an international convention, under the auspices of the International Atomic Energy Agency (IAEA). It is a companion to a suite of international conventions on nuclear safety and physical security, which serve to promote a global culture for the safe use of radioactive materials. Although the U.S. was the first nation to sign the Joint Convention on September 29, 1997, the ratification process was a challenging experience for the U.S., in the face of legislative priorities dominated by concerns for national security and threats from terrorism after September 11, 2001. Notwithstanding these prevailing circumstances, the U.S. ratified the Joint Convention in 2003, just prior to the First Review Meeting of the Contracting Parties, and participated fully therein. For the United States, participation as a Contracting Party provides many benefits. These range from working with other Parties to harmonize international approaches to achieve strong and effective nuclear safety programs on a global scale, to stimulating initiatives to improve safety systems within our own domestic programs, to learning about technical innovations by other Parties that can be useful to U.S. licensees, utilities, and industry in managing safety and its associated costs in our waste management activities. The Joint Convention process also provides opportunities to identify future areas of bilateral and multilateral technical and regulatory cooperation with other Parties, as well as an opportunity for U.S. vendors and suppliers to broaden their market to include foreign clients for safety improvement equipment and services. The Joint Convention is consistent with U.S. foreign policy considerations to support, as a priority, the strengthening of the worldwide safety culture in the use of nuclear energy. Because of its many benefits, we believe it is important to take

[Short-term effectiveness of Swanson artificial joint replacement in treating posttraumatic metacarpophalangeal joint stiffness].

Science.gov (United States)

Lu, Hui; Shen, Xiangqian; Xu, Jihua; Huang, Xin; Ye, Po; Wu, Shoucheng

2011-11-01

To investigate the short-term effectiveness of Swanson artificial joint replacement in treating post-traumatic metacarpophalangeal joint stiffness. Between August 2007 and May 2010, 11 cases (13 fingers) of metacarpophalangeal joint stiffness with soft tissue defects underwent Swanson artificial joint replacement. There were 7 males (9 fingers) and 4 females (4 fingers), aged 43 to 65 years with an average of 49 years. The involved fingers included 4 thumbs, 4 index fingers, 3 middle fingers, and 2 ring fingers. The types of injury included open and crush injury in 8 fingers, fracture of the metacarpophalangeal joint in 3 fingers, metacarpophalangeal joint severing in 2 fingers. The time from joint stiffness to hospitalization was 12 to 48 weeks (mean, 24 weeks). The joint activity was (136.82 +/- 28.96) degrees. According to total active motion (TAM) assessment, included good in 1 finger, fair in 6 fingers, and poor in 6 fingers before operation. The activities of daily living were assessed by Sollerman score, which was 45.64 +/- 11.04. The X-ray films and CT scan showed traumatic arthritis of the metacarpophalangeal joint. The incision healed by first intention. All patients were followed up 12 to 34 months (mean, 24.1 months). At last follow-up, the joint activity was (194.64 +/- 28.86) degrees, showing significant difference when compared with preoperative value (t = 25.214, P = 0.000). According to TAM assessment, including excellent in 1 finger, good in 4 fingers, fair in 7 fingers, and poor in 1 finger. The Sollerman score was 67.45 +/- 8.20 postoperatively, showing significant difference when compared with the preoperative score (t = -10.470, P = 0.000). X-ray examination showed no prosthesis fracture, periprosthetic fracture, or joint dislocation occurred at last follow-up. Swanson artificial joint replacement can be applied to treat post-traumatic metacarpophalangeal joint stiffness, which can improve the joint activity and has satisfactory short

Self-esteem in action

DEFF Research Database (Denmark)

Strandell, Jacob

2017-01-01

Self-esteem research has been in “crisis” during the last decade, due to the lack of strong, consistent correlations between self-esteem and behavioral outcomes. Some researchers have interpreted this as indicating that self-esteem is inconsequential in many important areas of life. However, the ......-construction, and thus performative. Future self-esteem research and theory should therefore focus on how people seek to enact, maintain, or defend a desired identity through performative actions....

Collaborative agency to support integrated care for children, young people and families: an action research study

Directory of Open Access Journals (Sweden)

Karen Stuart

2014-05-01

Full Text Available Introduction: Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration.Theory: The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of ‘collaborative agency’ to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration.Methods: Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice.Results: The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner’s experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

Collaborative agency to support integrated care for children, young people and families: an action research study

Directory of Open Access Journals (Sweden)

Karen Stuart

2014-05-01

Full Text Available Introduction: Collaboration was legislated in the delivery of integrated care in the early 2000s in the UK. This research explored how the reality of practice met the rhetoric of collaboration. Theory: The paper is situated against a theoretical framework of structure, agency, identity and empowerment. Collectively and contextually these concepts inform the proposed model of ‘collaborative agency’ to sustain integrated care. The paper brings sociological theory on structure and agency to the dilemma of collaboration. Methods: Participative action research was carried out in collaborative teams that aspired to achieve integrated care for children, young people and families between 2009 and 2013. It was a part time, PhD study in collaborative practice. Results: The research established that people needed to be able to be jointly aware of their context, to make joint decisions, and jointly act in order to deliver integrated services, and proposes a model of collaborative agency derived from practitioner’s experiences and integrated action research and literature on agency. The model reflects the effects of a range of structures in shaping professional identity, empowerment, and agency in a dynamic. The author proposes that the collaborative agency model will support integrated care, although this is, as yet, an untested hypothesis.

Effective interactions in strongly-coupled quantum systems

International Nuclear Information System (INIS)

Chen, J.M.C.

1986-01-01

In this thesis, they study the role of effective interactions in strongly-coupled Fermi systems where the short-range correlations introduce difficulties requiring special treatment. The correlated basis function method provides the means to incorporate the short-range correlations and generate the matrix elements of the Hamiltonian and identity operators in a nonorthogonal basis of states which are so important to their studies. In the first half of the thesis, the particle-hole channel is examined to elucidate the effects of collective excitations. Proceeding from a least-action principle, a generalization of the random-phase approximation is developed capable of describing such strongly-interacting Fermi systems as nuclei, nuclear matter, neutron-star matter, and liquid 3 He. A linear response of dynamically correlated system to a weak external perturbation is also derived based on the same framework. In the second half of the thesis, the particle-particle channel is examined to elucidate the effects of pairing in nuclear and neutron-star matter

Dissipative properties of materials with microplastic mechanism of damping under conditions of separate and joint action of static stresses and temperature

International Nuclear Information System (INIS)

Shpak, D.E.

1985-01-01

Static stress and temperature are studied experimentally for their separate and joint effect on dissipative properties of VT3-1 and Ehp 718 alloys whose dissipation energy is conditioned by microplastic strains. The results of the study are presented. It is shown that for the materials studied in contrast to the materials with other basic damping mechanisms joint effect of static stresses and temperature is close to a simple summation of the separate effect of these factors without any changes in the character of energy dissipation dependence

Dissipative properties of materials with microplastic mechanism of damping under conditions of separate and joint action of static stresses and temperature

Energy Technology Data Exchange (ETDEWEB)

Shpak, D.E.

1985-01-01

Static stress and temperature are studied experimentally for their separate and joint effect on dissipative properties of VT3-1 and Ehp 718 alloys whose dissipation energy is conditioned by microplastic strains. The results of the study are presented. It is shown that for the materials studied in contrast to the materials with other basic damping mechanisms joint effect of static stresses and temperature is close to a simple summation of the separate effect of these factors without any changes in the character of energy dissipation dependence.

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints

Directory of Open Access Journals (Sweden)

Evangelos I. Avgoulas

2016-07-01

Full Text Available There are a great variety of joint types used in nature which can inspire engineering joints. In order to design such biomimetic joints, it is at first important to understand how biological joints work. A comprehensive literature review, considering natural joints from a mechanical point of view, was undertaken. This was used to develop a taxonomy based on the different methods/functions that nature successfully uses to attach dissimilar tissues. One of the key methods that nature uses to join dissimilar materials is a transitional zone of stiffness at the insertion site. This method was used to propose bio-inspired solutions with a transitional zone of stiffness at the joint site for several glass fibre reinforced plastic (GFRP to steel adhesively bonded joint configurations. The transition zone was used to reduce the material stiffness mismatch of the joint parts. A numerical finite element model was used to identify the optimum variation in material stiffness that minimises potential failure of the joint. The best bio-inspired joints showed a 118% increase of joint strength compared to the standard joints.

Prosthesis of the wrist-joint

International Nuclear Information System (INIS)

Feldmeier, C.

1983-01-01

Function of the hand-joint and the well-being of patients can be severely affected by arthrosis of the wrist-joint. Therapeutically, arthrodesis usually results in a painfree status of stiffness. A painless and well functioning joint can be achieved by alloplastic joint replacement or resurfacing. The possibilities and clinical results in cases of arthrosis of the carpo-metacarpal joint of the thumb, pseudarthrosis of the scaphoid, aseptic necrosis of the Lunate and severe arthrosis of the radio-carpal joint are demonstrated. (orig.) [de

Design of mechanical joints

CERN Document Server

Blake, Alexander

2018-01-01

A cornerstone publication that covers the basic principles and practical considerations of design methodology for joints held by rivets, bolts, weld seams, and adhesive materials, Design of Mechanical Joints gives engineers the practical results and formulas they need for the preliminary design of mechanical joints, combining the essential topics of joint mechanics...strength of materials...and fracture control to provide a complete treatment of problems pertinent to the field of mechanical connections.

Antigravity: Spin-gravity coupling in action

Science.gov (United States)

Plyatsko, Roman; Fenyk, Mykola

2016-08-01

The typical motions of a spinning test particle in Schwarzschild's background which show the strong repulsive action of the highly relativistic spin-gravity coupling are considered using the exact Mathisson-Papapetrou equations. An approximated approach to choice solutions of these equations which describe motions of the particle's proper center of mass is developed.

Predicting human activities in sequences of actions in RGB-D videos

Science.gov (United States)

Jardim, David; Nunes, Luís.; Dias, Miguel

2017-03-01

In our daily activities we perform prediction or anticipation when interacting with other humans or with objects. Prediction of human activity made by computers has several potential applications: surveillance systems, human computer interfaces, sports video analysis, human-robot-collaboration, games and health-care. We propose a system capable of recognizing and predicting human actions using supervised classifiers trained with automatically labeled data evaluated in our human activity RGB-D dataset (recorded with a Kinect sensor) and using only the position of the main skeleton joints to extract features. Using conditional random fields (CRFs) to model the sequential nature of actions in a sequence has been used before, but where other approaches try to predict an outcome or anticipate ahead in time (seconds), we try to predict what will be the next action of a subject. Our results show an activity prediction accuracy of 89.9% using an automatically labeled dataset.

Hebbian learning and predictive mirror neurons for actions, sensations and emotions.

Science.gov (United States)

Keysers, Christian; Gazzola, Valeria

2014-01-01

Spike-timing-dependent plasticity is considered the neurophysiological basis of Hebbian learning and has been shown to be sensitive to both contingency and contiguity between pre- and postsynaptic activity. Here, we will examine how applying this Hebbian learning rule to a system of interconnected neurons in the presence of direct or indirect re-afference (e.g. seeing/hearing one's own actions) predicts the emergence of mirror neurons with predictive properties. In this framework, we analyse how mirror neurons become a dynamic system that performs active inferences about the actions of others and allows joint actions despite sensorimotor delays. We explore how this system performs a projection of the self onto others, with egocentric biases to contribute to mind-reading. Finally, we argue that Hebbian learning predicts mirror-like neurons for sensations and emotions and review evidence for the presence of such vicarious activations outside the motor system.

Synergistic Actions of Pyridostigmine Bromide and Insecticides on Muscle and Vascular Nociceptors

Science.gov (United States)

2014-01-01

were consistent with the Ethical Guidelines for Pain Research. Results: Following exposure to permethrin, action potential (AP) duration was greatly... osteoarthritis synovium. Clin Rheumatol 27, 1127-1134. Petruska, J. C., Napaporn, J., Johnson, R. D., and Cooper, B. Y. (2002). Chemical...with Gulf War Veterans’ Illness and joint pain compared to normal and osteoarthritis synovium. Clin Rheumatol. 2008;27:1127-34. Petruska JC, Napaporn

Factors associated with primary care prescription of opioids for joint pain.

Science.gov (United States)

Green, D J; Bedson, J; Blagojevic-Burwell, M; Jordan, K P; van der Windt, D

2013-02-01

Opioids are commonly prescribed in primary care and can offer pain relief but may also have adverse effects. Little is known about the characteristics of people likely to receive an opioid prescription in primary care. The aim is to identify what factors are associated with primary care prescribing of high-strength analgesics in a community sample of older people with joint pain. A prospective two-stage postal survey completed at baseline and 3-year follow-up in a population aged 50 and over registered with eight general practitioner (GP) practices in North Staffordshire (North Staffordshire Osteoarthritis Project cohorts) linked with data from medical records. Participants were selected who reported joint pain in one or more joints at baseline. Outcome measures were the number of prescriptions for high-strength pain medication (opioids) in the following 3 years. Socio-demographic and health status factors associated with prescription were assessed using a zero-inflated Poisson model. 873 (19%) people were prescribed opioids (out of 4652 providing complete data) ranging from 1 to 76 prescriptions over 3 years. Baseline factors significantly associated with increased rates of prescription were younger age group [65-74 group: incidence rate ratio (IRR) = 1.26 (1.18-1.35)], male gender [IRR = 1.17 (1.12-1.23)], severe joint pain [IRR = 1.19 (1.12-1.26)] poor physical function [IRR = 0.99 (0.99-0.99)] and lower frequency of alcohol consumption [once/twice a year: IRR = 1.13 (1.06-1.21), never: IRR = 1.14 (1.06-1.22)]. Restricting the analysis to those without prior prescriptions for strong opioids showed similar results. Poor physical function and participation restrictions were strongly associated with prescriptions of stronger opioids in addition to several socio-demographic and lifestyle factors. Given the uncertainties over the effectiveness and risks of opioid use, future research could investigate decision making of GPs, exploring reasons for prescribing them. �

Part I. Remembering No. 2 (Ladislav Loerinc). EMO joint venture, joint-stock company - really completely useless organ?

International Nuclear Information System (INIS)

Blaha, M.

2008-01-01

In this chapter author reviewed the story of the EMO joint venture, joint-stock company, between Slovenske elektrarne, a. s. and EdF. EMO joint venture, joint-stock company, was established to complete the Mochovce nuclear power plant. EMO joint venture, joint-stock company was closed after one year of work. History of EMO joint venture, joint-stock company, was described by its former general manager Mr. Ladislav Loerinc.

Fracture resistance improvement of polypropylene by joint action of core-shell particles and nucleating agent

International Nuclear Information System (INIS)

Yang Gang; Han Liang; Ding Haifeng; Wu Haiyan; Huang Ting; Li Xiaoxi; Wang Yong

2011-01-01

Research highlights: →The core-shell particles, which were prepared from melt blending of POE and nano-CaCO 3 , and different nucleating agents (α-form NA or β-form NA) were first introduced into PP to prepare the super toughened PP materials. →NAs control the crystalline structures of PP matrix including the spherulites diameter and the crystal form. →NAs and core-shell particles exhibit apparent joint effect in improving the fracture resistance of PP. - Abstract: As a serial work about the fracture resistance improvement of polypropylene (PP), this work reports the joint effect of core-shell particles and nucleating agent (NA) on the microstructure and fracture resistance of PP. Core-shell particles were prepared through melt blending of ethylene-octene copolymer (POE) and calcium carbonate (CaCO 3 ). Different NA, i.e. α-form NA (P-tert-butylbenzoic acid-Al, MD-NA-28) and β-form NA (aryl amides compound, TMB-5) were introduced into PP matrix to control the crystalline structure. The phase morphology of POE and the distribution of CaCO 3 were characterized by using scanning electron microscope (SEM), and the crystallization behavior of PP matrix were investigated by using differential scanning calorimetry (DSC), wide angle X-ray diffraction (WAXD) and polarization optical microscope (POM). The mechanical properties were obtained through universal tensile measurement and notched Izod impact measurement. Surprisingly, the results show that through addition of so-called core-shell particles and NA simultaneously, the fracture resistance of PP can be dramatically improved.

Effect of Strain Rate on Joint Strength and Failure Mode of Lead-Free Solder Joints

Science.gov (United States)

Lin, Jian; Lei, Yongping; Fu, Hanguang; Guo, Fu

2018-03-01

In surface mount technology, the Sn-3.0Ag-0.5Cu solder joint has a shorter impact lifetime than a traditional lead-tin solder joint. In order to improve the impact property of SnAgCu lead-free solder joints and identify the effect of silver content on tensile strength and impact property, impact experiments were conducted at various strain rates on three selected SnAgCu based solder joints. It was found that joint failure mainly occurred in the solder material with large plastic deformation under low strain rate, while joint failure occurred at the brittle intermetallic compound layer without any plastic deformation at a high strain rate. Joint strength increased with the silver content in SnAgCu alloys in static tensile tests, while the impact property of the solder joint decreased with increasing silver content. When the strain rate was low, plastic deformation occurred with failure and the tensile strength of the Sn-3.0Ag-0.5Cu solder joint was higher than that of Sn-0.3Ag-0.7Cu; when the strain rate was high, joint failure mainly occurred at the brittle interface layer and the Sn-0.3Ag-0.7Cu solder joint had a better impact resistance with a thinner intermetallic compound layer.

Forming a multinational joint venture

International Nuclear Information System (INIS)

Bhatia, N.K.; Garb, R.H.; Statton, T.D.

1990-01-01

This paper discusses the basis and mechanics for forming a multinational joint venture. The topics of the paper include the motivations for a joint venture, selection of the appropriate co-venturer, management of the multinational joint venture, and the joint venture agreement. The authors state that a joint venture is not applicable or desirable in all instances and to be successful, must be carefully planned

Synchronised and complementary coordination mechanisms in an asymmetric joint aiming task

DEFF Research Database (Denmark)

Skewes, Joshua Charles; Skewes, Lea; Michael, John

2015-01-01

Many forms of social interaction require that behaviour be coordinated in the here and now. Much research has been conducted on how people coordinate their actions in real time to achieve a joint goal, showing that people use both synchronised (i.e. symmetric) and complementary (i.e. asymmetric) ...... in this asymmetric task, as people synchronise better with an irregular, but adaptive partner, than with a completely predictable, but non-responsive metronome. These results show that given asymmetric task constraints, adaptability, rather than predictability facilitates coordination....

Joint imaging

International Nuclear Information System (INIS)

Hengst, W.

1984-01-01

Joint imaging is a proven diagnostic procedure which has become indispensable to the detection and treatment of different joint diseases in almost all disciplines. The method is suited for early diagnosis of joint affections both in soft tissue and bone which cannot be detected by X-ray or other procedures. The local activity accumulation depends on the rate of metabolism and is visualized in the scan, which in turn enables the extension and floridity of focal lesions to be evaluated and followed-up. Although joint scans may often give hints to probabilities relevant to differential diagnosis, the method is non-specific and only useful if based on the underlying clinical picture and X-ray finding, if possible. The radiation exposure is very low and does not represent a hazard in cases of adequate assessment of indication. In pregnant women and children the assessment of indication has to be based on very strict principles. The method is suited for out-patient diagnosis and can be applied in all installations equipped with a gamma camera and a technetium generator. (orig.) [de

Mechanics of Suture Joints

Science.gov (United States)

Li, Yaning; Song, Juha; Ortiz, Christine; Boyce, Mary; Ortiz Group/DMSE/MIT Team; Boyce Group/ME/MIT Team

2011-03-01

Biological sutures are joints which connect two stiff skeletal or skeletal-like components. These joints possess a wavy geometry with a thin organic layer providing adhesion. Examples of biological sutures include mammalian skulls, the pelvic assembly of the armored fish Gasterosteus aculeatus (the three-spined stickleback), and the suture joints in the shell of the red-eared slider turtle. Biological sutures allow for movement and compliance, control stress concentrations, transmit loads, reduce fatigue stress and absorb energy. In this investigation, the mechanics of the role of suture geometry in providing a naturally optimized joint is explored. In particular, analytical and numerical micromechanical models of the suture joint are constructed. The anisotropic mechanical stiffness and strength are studied as a function of suture wavelength, amplitude and the material properties of the skeletal and organic components, revealing key insights into the optimized nature of these ubiquitous natural joints.

Generalised joint hypermobility and knee joint hypermobility: prevalence, knee joint symptoms and health-related quality of life in a Danish adult population.

Science.gov (United States)

Junge, Tina; Henriksen, Peter; Hansen, Sebrina; Østengaard, Lasse; Golightly, Yvonne M; Juul-Kristensen, Birgit

2017-10-27

Several biomechanical factors, such as knee joint hypermobility (KJH), are suggested to play a role in the etiology of knee joint symptoms and knee osteoarthritis. Nevertheless, the prevalence or consequences of KJH solely or included in the classification of generalized joint hypermobility (GJHk) is unknown for a general population. Therefore, the objectives were to report the prevalence of self-reported GJHk and KJH, as well as the association of these conditions to knee joint symptoms, severity and duration of symptoms, and health-related quality of life (HRQoL) in a Danish adult population. This study is a cross-sectional population-based survey of 2056 Danish adults. Respondents received online questionnaires of GJHk and KJH, knee joint symptoms, the severity and duration of these, as well as HRQoL. Total response rate was 49% (n = 1006). The prevalence of self-reported GJHk and KJH was 13% and 23%, mostly representing women. More than half of the respondents with GJHk and KJH had knee joint symptoms. The odds for reporting knee joint symptoms, severity of knee joint symptoms and duration of knee joint symptoms were twice as high for respondents with GJHk and KJH. Respondents with GJHk and KJH reported lower HRQoL. GJHk and KJH were frequently reported in the Danish adult population, mostly in women. Respondents with GJHk and KJH were two times more likely to report knee joint-related symptoms such as pain, reduced performance of usual activity and lower HRQoL. The impact of these conditions on HRQoL is comparable with knee osteoarthritis. © 2017 Asia Pacific League of Associations for Rheumatology and John Wiley & Sons Australia, Ltd.

Your actions in my cerebellum: subclinical deficits in action observation in patients with unilateral chronic cerebellar stroke.

Science.gov (United States)

Cattaneo, Luigi; Fasanelli, Monica; Andreatta, Olaf; Bonifati, Domenico Marco; Barchiesi, Guido; Caruana, Fausto

2012-03-01

Empirical evidence indicates that cognitive consequences of cerebellar lesions tend to be mild and less important than the symptoms due to lesions to cerebral areas. By contrast, imaging studies consistently report strong cerebellar activity during tasks of action observation and action understanding. This has been interpreted as part of the automatic motor simulation process that takes place in the context of action observation. The function of the cerebellum as a sequencer during executed movements makes it a good candidate, within the framework of embodied cognition, for a pivotal role in understanding the timing of action sequences. Here, we investigated a cohort of eight patients with chronic, first-ever, isolated, ischemic lesions of the cerebellum. The experimental task consisted in identifying a plausible sequence of pictures from a randomly ordered group of still frames extracted from (a) a complex action performed by a human actor ("biological action" test) or (b) a complex physical event occurring to an inanimate object ("folk physics" test). A group of 16 healthy participants was used as control. The main result showed that cerebellar patients performed significantly worse than controls in both sequencing tasks, but performed much worse in the "biological action" test than in the "folk physics" test. The dissociation described here suggests that observed sequences of simple motor acts seem to be represented differentially from other sequences in the cerebellum.

SADC establishes a regional action plan.

Science.gov (United States)

Klouda, T

1997-02-01

The regional meeting held on AIDS strategy in Lilongwe, Malawi, in December, 1996, made important advances. The 12 countries of the SADC (Southern Africa Development Community) joined the European Union to institute a regional action plan for the reduction of susceptibility of people to HIV because of social, cultural, and environmental factors; the vulnerability of people with HIV infection to social and other difficulties; and the vulnerability of institutions because of the foregoing impacts. At the conference the issues explored were employment, mining, medical drugs, education, and tourism. An employment charter was seen as crucial for the success of AIDS and workplace activities. Facilitation of travel across borders was important for the reduction of susceptibility to HIV infection. Enhancement of regional policies for essential drugs was vital for drugs for the treatment of AIDS. The clarification of the regional role was critical for regional support of national action (strengthening technical and institutional capacities) and for regional joint action such as studies on research, harmonization of data collection on HIV/AIDS; organization of training; development of information and education on HIV/AIDS; facilitation of manufacturing of drugs and condoms; and the development of a regional information and education program about HIV/AIDS. The conference also clarified HIV/AIDS programs in relation to other health and socioeconomic problems.

Bodily action penetrates affective perception

Science.gov (United States)

Rigutti, Sara; Gerbino, Walter

2016-01-01

Fantoni & Gerbino (2014) showed that subtle postural shifts associated with reaching can have a strong hedonic impact and affect how actors experience facial expressions of emotion. Using a novel Motor Action Mood Induction Procedure (MAMIP), they found consistent congruency effects in participants who performed a facial emotion identification task after a sequence of visually-guided reaches: a face perceived as neutral in a baseline condition appeared slightly happy after comfortable actions and slightly angry after uncomfortable actions. However, skeptics about the penetrability of perception (Zeimbekis & Raftopoulos, 2015) would consider such evidence insufficient to demonstrate that observer’s internal states induced by action comfort/discomfort affect perception in a top-down fashion. The action-modulated mood might have produced a back-end memory effect capable of affecting post-perceptual and decision processing, but not front-end perception. Here, we present evidence that performing a facial emotion detection (not identification) task after MAMIP exhibits systematic mood-congruent sensitivity changes, rather than response bias changes attributable to cognitive set shifts; i.e., we show that observer’s internal states induced by bodily action can modulate affective perception. The detection threshold for happiness was lower after fifty comfortable than uncomfortable reaches; while the detection threshold for anger was lower after fifty uncomfortable than comfortable reaches. Action valence induced an overall sensitivity improvement in detecting subtle variations of congruent facial expressions (happiness after positive comfortable actions, anger after negative uncomfortable actions), in the absence of significant response bias shifts. Notably, both comfortable and uncomfortable reaches impact sensitivity in an approximately symmetric way relative to a baseline inaction condition. All of these constitute compelling evidence of a genuine top-down effect on

Bodily action penetrates affective perception

Directory of Open Access Journals (Sweden)

Carlo Fantoni

2016-02-01

Full Text Available Fantoni & Gerbino (2014 showed that subtle postural shifts associated with reaching can have a strong hedonic impact and affect how actors experience facial expressions of emotion. Using a novel Motor Action Mood Induction Procedure (MAMIP, they found consistent congruency effects in participants who performed a facial emotion identification task after a sequence of visually-guided reaches: a face perceived as neutral in a baseline condition appeared slightly happy after comfortable actions and slightly angry after uncomfortable actions. However, skeptics about the penetrability of perception (Zeimbekis & Raftopoulos, 2015 would consider such evidence insufficient to demonstrate that observer’s internal states induced by action comfort/discomfort affect perception in a top-down fashion. The action-modulated mood might have produced a back-end memory effect capable of affecting post-perceptual and decision processing, but not front-end perception. Here, we present evidence that performing a facial emotion detection (not identification task after MAMIP exhibits systematic mood-congruent sensitivity changes, rather than response bias changes attributable to cognitive set shifts; i.e., we show that observer’s internal states induced by bodily action can modulate affective perception. The detection threshold for happiness was lower after fifty comfortable than uncomfortable reaches; while the detection threshold for anger was lower after fifty uncomfortable than comfortable reaches. Action valence induced an overall sensitivity improvement in detecting subtle variations of congruent facial expressions (happiness after positive comfortable actions, anger after negative uncomfortable actions, in the absence of significant response bias shifts. Notably, both comfortable and uncomfortable reaches impact sensitivity in an approximately symmetric way relative to a baseline inaction condition. All of these constitute compelling evidence of a genuine top

The temporomandibular joint

International Nuclear Information System (INIS)

Campbell, W.

1984-01-01

Whilst the temporomandibular joint is in many ways unique, it is subject to all the diseases and disorders found in joints in other parts of the human skeleton. By far the most common disorder is injury, followed by arthropathy, acute and chronic dislocations, ankylosis, and in rare instances, neoplasms. The diagnosis and management of the temporomandibular joint are the primary responsibility of the oral surgeon. Nevertheless, this anatomical region is an area in which the cooperation of medical and dental disciplines may be required for the satisfactory conclusion of treatment. The more so when the disease process involves either associated psychosomatic illness or malignancy. The mainstay of the diagnosis is a careful radiological examination of the joint. There exists a delicate relationship between the dentition, the muscles of mastication, and the temporomandibular articulation, which is controlled by arthrokinetic reflex activity of the branches of the 5th cranial nerve. Imbalance between one or more of the components of this integrated system frequently leads to disturbances in function. Pain-dysfunction disorders constitute the larger part of temporomandibular joint disturbances generally encountered

Effective action calculation in lattice QCD

International Nuclear Information System (INIS)

Hoek, J.

1983-01-01

A method (called the effective action method) devised to make analytic calculations in Quantum Chromodynamics in the region of strong coupling is presented. First, the author deals with developing the calculation of a strong coupling expansion of the generating functional for gauge systems on a lattice with arbitrary sources. An accompanying manual describes the implementation of this calculation on a computer. The next step consists of substituting the expressions for the one-link free energies for a specific gauge group in the result of the previous calculation. This process of substitution, together with the replacement of the sources by a bilinear combination of fermion fields, is described for the group SU(3). More details on the implementation of the substitution scheme on a computer can be found in the accompanying manual. From the effective action thus obtained in terms of meson fields and baryon fields the Green functions of the theory can be derived. As an illustrative application the effective potential determining the vacuum expectation value of the meson field is calculated. (Auth.)

Improving Mechanical Properties of PVPPA Welded Joints of 7075 Aluminum Alloy by PWHT

Directory of Open Access Journals (Sweden)

Guowei Li

2018-03-01

Full Text Available In this study, 7075 aluminum alloy with a thickness of 10 mm was successfully welded with no obvious defects by pulsed variable polarity plasma arc (PVPPA welding. The mechanical properties of PVPPA welded joints have been researched by post weld heat treatment (PWHT. The results indicate that the heat treatment strongly affects the mechanical properties of the welded joints. The tensile strength and the microhardness of the welded joints gradually improved with the increase of the solution temperature. With the increase of the solution time, the tensile strength, and microhardness first dramatically increased and then decreased slightly. The best tensile strength of 537.5 MPa and the microhardness of 143.7 HV were obtained after 490 °C × 80 min + 120 °C × 24 h, and the strength was nearly 91.2% of that of the parent metal, and increased about 35% compared with as-welded. The improvement of strength and microhardness was mainly due to the precipitation of η′ phase.

Deep learning the dynamic appearance and shape of facial action units

OpenAIRE

Jaiswal, Shashank; Valstar, Michel F.

2016-01-01

Spontaneous facial expression recognition under uncontrolled conditions is a hard task. It depends on multiple factors including shape, appearance and dynamics of the facial features, all of which are adversely affected by environmental noise and low intensity signals typical of such conditions. In this work, we present a novel approach to Facial Action Unit detection using a combination of Convolutional and Bi-directional Long Short-Term Memory Neural Networks (CNN-BLSTM), which jointly lear...

A cadaveric investigation into the demographic and bony alignment properties associated with osteoarthritis of the patellofemoral joint.

Science.gov (United States)

Weinberg, Douglas S; Tucker, Braden J; Drain, Joseph P; Wang, David M; Gilmore, Allison; Liu, Raymond W

2016-06-01

Patellofemoral joint osteoarthritis is common, although circumstances dictating its evolution and pathogenesis remain unclear. Advances in surgical technique have improved the ability to modify long-bone alignment in the coronal, sagittal, and axial planes. However, to our knowledge, there is no significant long-term data available in regard to the relationship between anatomic alignment parameters most amenable to surgical modification and patellofemoral joint osteoarthritis. Five-hundred and seventy-one cadaveric skeletons were obtained from the Hamann-Todd osteological collection. Mechanical lateral distal femoral angle, medial proximal tibial angle, tibial slope, femoral version, tibial torsion, the position of the tibial tubercle relative to the width of the tibial plateau, trochlear depth, and patellar size were measured using validated techniques. A previously published grading system for patellofemoral joint arthritis was used to quantify macroscopic signs of degenerative joint disease. Increasing age (standardized beta 0.532, ppatellofemoral joint osteoarthritis. A relatively more laterally positioned tibial tubercle trended towards predicting patellofemoral joint osteoarthritis (standardized beta 0.080, p=0.089). These findings confirm that patellofemoral joint osteoarthritis is strongly associated with increasing age and female gender. Valgus alignment of the distal femur, a relatively more lateral location of the tibial tubercle, and a shallower trochlear grove appear to have modest effects on the development of patellofemoral joint osteoarthritis. Copyright © 2016 Elsevier B.V. All rights reserved.

Examining the joint toxicity of chlorpyrifos and atrazine in the aquatic species: Lepomis macrochirus, Pimephales promelas and Chironomus tentans

International Nuclear Information System (INIS)

Tyler Mehler, W.; Schuler, Lance J.; Lydy, Michael J.

2008-01-01

The joint toxicity of chlorpyrifos and atrazine was compared to that of chlorpyrifos alone to discern any greater than additive response using both acute toxicity testing and whole-body residue analysis. In addition, acetylcholinesterase (AChE) inhibition and biotransformation were investigated to evaluate the toxic mode of action of chlorpyrifos in the presence of atrazine. The joint toxicity of atrazine and chlorpyrifos exhibited no significant difference in Lepomis macrochirus compared to chlorpyrifos alone; while studies performed with Pimephales promelas and Chironomus tentans, did show significant differences. AChE activity and biotransformation showed no significant differences between the joint toxicity of atrazine and chlorpyrifos and that of chlorpyrifos alone. From the data collected, the combination of atrazine and chlorpyrifos pose little additional risk than that of chlorpyrifos alone to the tested fish species. - The joint toxicity between atrazine and chlorpyrifos caused greater than additive responses in invertebrates, but the interactions in vertebrates was less pronounced

Examining the joint toxicity of chlorpyrifos and atrazine in the aquatic species: Lepomis macrochirus, Pimephales promelas and Chironomus tentans

Energy Technology Data Exchange (ETDEWEB)

Tyler Mehler, W.; Schuler, Lance J. [Fisheries and Illinois Aquaculture Center and Department of Zoology, Southern Illinois University at Carbondale, Carbondale, IL 62901-6511 (United States); Lydy, Michael J. [Fisheries and Illinois Aquaculture Center and Department of Zoology, Southern Illinois University at Carbondale, Carbondale, IL 62901-6511 (United States)], E-mail: mlydy@siu.edu

2008-03-15

The joint toxicity of chlorpyrifos and atrazine was compared to that of chlorpyrifos alone to discern any greater than additive response using both acute toxicity testing and whole-body residue analysis. In addition, acetylcholinesterase (AChE) inhibition and biotransformation were investigated to evaluate the toxic mode of action of chlorpyrifos in the presence of atrazine. The joint toxicity of atrazine and chlorpyrifos exhibited no significant difference in Lepomis macrochirus compared to chlorpyrifos alone; while studies performed with Pimephales promelas and Chironomus tentans, did show significant differences. AChE activity and biotransformation showed no significant differences between the joint toxicity of atrazine and chlorpyrifos and that of chlorpyrifos alone. From the data collected, the combination of atrazine and chlorpyrifos pose little additional risk than that of chlorpyrifos alone to the tested fish species. - The joint toxicity between atrazine and chlorpyrifos caused greater than additive responses in invertebrates, but the interactions in vertebrates was less pronounced.

Benign joint hypermobility syndrome

Directory of Open Access Journals (Sweden)

Iwona Słowińska

2014-11-01

Full Text Available Benign joint hypermobility syndrome (BJHS, commonly known as loose ligament syndrome, is a non-inflammatory rheumatic condition. It is characterised by a greater than normal range of motion of the joints of the limbs and spine. The prevalence of the syndrome in preschool-age children is estimated to be between 2% and 30%, depending on ethnic background (with higher prevalence in Asian and African populations, occurring most often in families with a history of the condition and more frequently in girls. This paper presents a case report of a 12-year-old girl. A broad differential diagnostic approach to recurrent joint inflammation with joint effusion and pain made it possible to establish a diagnosis of benign joint hypermobility syndrome. The child met the Brighton criteria; her Beighton score was 7 out of 9. Patient education aimed at eliminating abnormal joint movement and an appropriate rehabilitation programme play key roles in the treatment of BJHS.

Trainees' Perceived Knowledge Gain Unrelated to the Training Domain: The Joint Action of Impression Management and Motives

Science.gov (United States)

Chiaburu, Dan S.; Huang, Jason L.; Hutchins, Holly M.; Gardner, Richard G.

2014-01-01

Trainees' knowledge gains represent an important outcome in human resource development. In this research, we tested a model examining the joint influence of social desirability (impression management, self-deception) and motives (need for power, need for approval) on trainees' self-reported knowledge gain. We conducted a study with…

Sacroiliac joint: A review

Directory of Open Access Journals (Sweden)

Khushali Tilvawala

2018-01-01

Full Text Available Sacroiliac joint (SIJ pain is one of the common but underdiagnosed source of mechanical low back pain. The incidence is estimated to be in the range of 15%–30% in patients with nonradicular low back pain. The signs and symptoms of SIJ pain mimic pain arising from other causes of low back pain. There is no single symptom or physical examination finding that can firmly diagnose SIJ as a source of patient's pain. There is good evidence suggesting that a combination of three or more positive provocative tests strongly suggests SIJ dysfunction. Intra-articular injection with local anesthetic is considered the gold standard for diagnosis of SIJ pain. Many treatment modalities are available for SIJ pain, ranging from conservative management to surgical interventions. This review article covers all the aspects of SIJ pain, with treatment section mainly covering evidence-based interventional procedures.

Sacroiliac joint dysfunction.

Science.gov (United States)

Ilaslan, Hakan; Arslan, Ahmet; Koç, Omer Nadir; Dalkiliç, Turker; Naderi, Sait

2010-07-01

Sacroiliac joint dysfunction is a disorder presenting with low back and groin pain. It should be taken into consideration during the preoperative differential diagnosis of lumbar disc herniation, lumbar spinal stenosis and facet syndrome. Four cases with sacroiliac dysfunction are presented. The clinical and radiological signs supported the evidence of sacroiliac dysfunction, and exact diagnosis was made after positive response to sacroiliac joint block. A percutaneous sacroiliac fixation provided pain relief in all cases. The mean VAS scores reduced from 8.2 to 2.2. It is concluded that sacroiliac joint dysfunction diagnosis requires a careful physical examination of the sacroiliac joints in all cases with low back and groin pain. The diagnosis is made based on positive response to the sacroiliac block. Sacroiliac fixation was found to be effective in carefully selected cases.

Metallic joints for very high vacuum; Joints metalliques pour ultra-vide

Energy Technology Data Exchange (ETDEWEB)

Paigne, J [Commissariat a l' Energie Atomique, Saclay (France).Centre d' Etudes Nucleaires

1961-07-01

After defining three main types of joint; three types of distribution of the tightening force in the clamps are demonstrated; the distribution of stresses, distortion and displacements in these clamps is then calculated by means of the theory of elasticity. This is followed by experimental results on a particular means of tightening (i.e. screw-clamps). From a brief discussion on the behaviour of the clamps it is possible finally to define other types of joint deriving from the main types originally foreseen. (author) [French] Apres avoir defini trois principaux types de joints, on met en evidence trois types de distribution des forces de serrage des brides; puis on calcule a l'aide de la theorie de l'elasticite la distribution des contraintes, deformations et deplacements dans ces brides. On donne ensuite des resultats experimentaux sur un mode de serrage particulier (cas des serres-joints). Une discussion sommaire sur le comportement des brides permet de definir finalement d'autres types de joints derivant des types principaux envisages initialement. (auteur)

Interaction of a strong vortex with decaying turbulence

International Nuclear Information System (INIS)

Terry, P.W.

1988-01-01

The evolution of a localized, axially symmetric vortex under the action of shear stresses associated with decaying two-dimensional turbulent vorticity which is inhomogeneous in the presence of the vortex is studied analytically. For a vortex which is sufficiently strong relative to the coefficient of turbulent eddy viscosity, it is shown that turbulent fluctuations in the vortex interior and diffusion of coherent vorticity by the turbulence localize to the vortex periphery. It is also found that the coefficient of diffusion is small compared to the coefficient of eddy viscosity. 8 refs

Acromioclavicular joint separation

Directory of Open Access Journals (Sweden)

Devan Pandya, BS

2018-04-01

Full Text Available History of present illness: A 30-year-old male was brought in by ambulance to the emergency department as a trauma activation after a motorcycle accident. The patient was the helmeted rider of a motorcycle traveling at an unknown speed when he lost control and was thrown off his vehicle. He denied loss of consciousness, nausea, or vomiting. The patient’s vital signs were stable and his only complaint was pain around his left shoulder. On exam, the patient had a prominent left clavicle without skin compromise. He had adequate range of motion in the left shoulder with moderate pain, and his left upper extremity was neurovascularly intact. Significant findings: Plain films of the left shoulder showed elevation of the left clavicle above the acromion. There was an increase in the acromioclavicular (AC and coracoclavicular (CC distances (increased joint distances marked with red and blue arrows, respectively. A normal AC joint measures 1-3 mm whereas a normal CC distance measures 11-13 mm.1 The injury was classified as a Rockwood type III AC joint separation. Discussion: The AC joint is a synovial joint between an oval facet on the acromion and a similar facet on the distal end of the clavicle. Horizontal stability is provided by the AC joint while axial stability is provided by the CC joint.2,3 AC joint injuries account for about 9%-12% of shoulder girdle injuries, and the most common mechanism is direct trauma.4,5 Initial evaluation with imaging includes plain films with three views: the anterior-posterior (AP view with the shoulder in internal and external rotation as well as an axillary, or scapula-Y view (sensitivity 40%, specificity 90% for all films.6,7 AC joint injuries are classified by the Rockwood system.8 Type I involves a sprain or incomplete tear of the AC ligaments with an intact CC ligament. The AC joint appears normal on X-ray, but can become widened with stress, achieved by having the patient hold a 10-15 pound weight from each

Hip joint injection

Science.gov (United States)

... medicine into the joint. The provider uses a real-time x-ray (fluoroscopy) to see where to place ... Wakefield RJ. Arthrocentesis and injection of joints and soft tissue. In: Firestein GS, Budd RC, Gabriel SE, ...

Stiff, Strong Splice For A Composite Sandwich Structure

Science.gov (United States)

Schmaling, D.

1991-01-01

New type of splice for composite sandwich structure reduces peak shear stress in structure. Layers of alternating fiber orientation interposed between thin ears in adhesive joint. Developed for structural joint in spar of helicopter rotor blade, increases precision of control over thickness of adhesive at joint. Joint easy to make, requires no additional pieces, and adds little weight.

Contending logics of action in development cooperation

DEFF Research Database (Denmark)

Fejerskov, Adam Moe

2017-01-01

and organizational change. This article builds an analytical framework for empirically exploring logics of action in development cooperation and then explores a case of how two strong logics, those of ‘cost-effectiveness’ and ‘gender equality and women’s empowerment’, respectively, contend in the Bill and Melinda...

Analysis and Modelling of the Structural Components of the Elbow Joint

OpenAIRE

Romero Rey, Gregorio; Martínez Muneta, María Luisa; Gómez, M.; Mera Sánchez De Pedro, José Manuel

2013-01-01

A recent application of computer simulation is its use for the human body, which resembles a mechanism that is complemented by torques in the joints that are caused by the action of muscles and tendons. Among others, the application can be used to provide training in surgical procedures or to learn how the body works. Some of the other applications are to make a biped walk upright, to build robots that are designed on the human body or to make prostheses or robot arms to perform specific task...

Strength of vacuum brazed joints for repair; Haallfasthet hos reparationer utfoerda med vakuumloedning

Energy Technology Data Exchange (ETDEWEB)

Berglin, Leif [Siemens Industrial Turbomachinery AB, Finspaang (Sweden)

2005-04-01

Strength data are missing for braze joints. Repaired components cannot fully make use of the strength of the braze, and lifetime will be underestimated. The goal of the project was to generate material data to be able to prolong the lifetime of the components. Two different material combinations were tested, 12% Chromium steel brazed with BNi-2, and a nickel base alloy, IN792 brazed with BNi-5. Tensile testing at room temperature and elevated temperature was performed in the project. Target group is purchasers and suppliers of repaired components. A tensile test specimen with butt joint was developed in the project. The used test specimen worked well for the 12% Chromium steel. The results from testing show that proof stress and tensile strength are strongly depending on the joint gap, particularly at room temperature. High strength, close to base material strength, was achieved with joint gaps smaller than 50{mu}m. For wider joint gaps, strength was lower. Strength was approximately 25% of base material strength for joint gaps over 100{mu}m. The results can be explained by changes in microstructure. Joint gaps wider than 50{mu}m showed evidence of two-phase structure. At 500 deg C, the results also showed a connection between joint gap, microstructure and strength. The generated strength data can be used for calculations of lifetime for repaired components. Two different process errors were discovered in the manufacturing process of the brazed IN792 test specimens. The generated material data are therefor erroneous. The reason for this was two manufacturing errors. The tack welding was done with too high heat input. The surfaces of the joint gap became oxidised and the oxide hindered wetting of the braze. The second reason was that the brazing was done without the prescribed hold time at maximum temperature. The melting of the braze was therefor not completed when cooling started. As a result, the strength of the IN792 specimens was low at both temperatures.

Building the knowledge base for environmental action and sustainability

DEFF Research Database (Denmark)

2015-01-01

was “Building the knowledge base for environmental action and sustainability”. The joint conference was designed to facilitate ‘within‐the‐domain’, as well as to create a space for developing synergies between the two communities. Altogether 125 research and applied papers (including extended abstracts) from 42......“Knowledge is power” (Sir Francis Bacon (1561 – 1626), Religious Meditations, Of Heresis, 1597) “Science is organised knowledge. Wisdom is organised life” (Immanuel Kant (1724 – 1804)) The 29th International Conference on Informatics for Environmental Protection and the third International...

Electronic Maxwell demon in the coherent strong-coupling regime

Science.gov (United States)

Schaller, Gernot; Cerrillo, Javier; Engelhardt, Georg; Strasberg, Philipp

2018-05-01

We consider an external feedback control loop implementing the action of a Maxwell demon. Applying control actions that are conditioned on measurement outcomes, the demon may transport electrons against a bias voltage and thereby effectively converts information into electric power. While the underlying model—a feedback-controlled quantum dot that is coupled to two electronic leads—is well explored in the limit of small tunnel couplings, we can address the strong-coupling regime with a fermionic reaction-coordinate mapping. This exact mapping transforms the setup into a serial triple quantum dot coupled to two leads. We find that a continuous projective measurement of the central dot occupation would lead to a complete suppression of electronic transport due to the quantum Zeno effect. In contrast, by using a microscopic detector model we can implement a weak measurement, which allows for closure of the control loop without transport blockade. Then, in the weak-coupling regime, the energy flows associated with the feedback loop are negligible, and dominantly the information gained in the measurement induces a bound for the generated electric power. In the strong coupling limit, the protocol may require more energy for operating the control loop than electric power produced, such that the whole device is no longer information dominated and can thus not be interpreted as a Maxwell demon.

A Prodrug Approach Involving In Situ Depot Formation to Achieve Localized and Sustained Action of Diclofenac After Joint Injection

DEFF Research Database (Denmark)

Thing, Mette; Agårdh, Li; Larsen, Susan

2014-01-01

Long-acting nonsteroidal anti-inflammatory drug formulations for intra-articular injection might be effective in the management of joint pain and inflammation associated sports injuries and osteoarthritis. In this study, a prodrug-based delivery system was evaluated. The synthesized diclofenac...

Parameter identification for joint elements in a revolute-joint detector manipulator

International Nuclear Information System (INIS)

Preissner, C.; Shu, D.; Royston, T.

2005-01-01

A revolute-joint robot is being developed for the spatial positioning of an x-ray detector at the Advanced Photon Source. Commercially available revolute-joint manipulators do not meet our size, positioning, or payload specifications. One idea being considered is the modification of a commercially available robot, with the goal of improving the repeatability and trajectory accuracy. Theoretical, computational, and experimental procedures are being used to (1) identify, (2) simulate the dynamics of an existing robot system using a multibody approach, and eventually (3) design an improved version, with low dynamic positioning uncertainty. A key aspect of the modeling and performance prediction is accurate stiffness and damping values for the robot joints. This paper discusses the experimental identification of the stiffness and damping parameters for one robot harmonic drive joint

Tweets and Mobilisation: Collective Action Theory and Social Media

Directory of Open Access Journals (Sweden)

Cody McClain Brown

2017-06-01

Full Text Available This article examines the relationship between social protest and social media from the theoretical perspective of the Collective Action Research Program. While the literature shows strong empirical evidence for a positive relationship between social media use and incidents of social protest, the theoretical underpinnings of this relationship remain contested and often unspecified. In order to provide a stronger theoretical basis for this relationship this paper explores theories of collective action, focusing on how social media can assist in solving the dissident collective action problem. It argues that using collective action theory to understand social media and protest can better inform our understanding of how and why social media shares a positive relationship with incidents of social protest.

Explaining radical group behavior: Developing emotion and efficacy routes to normative and nonnormative collective action.

Science.gov (United States)

Tausch, Nicole; Becker, Julia C; Spears, Russell; Christ, Oliver; Saab, Rim; Singh, Purnima; Siddiqui, Roomana N

2011-07-01

A recent model of collective action distinguishes 2 distinct pathways: an emotional pathway whereby anger in response to injustice motivates action and an efficacy pathway where the belief that issues can be solved collectively increases the likelihood that group members take action (van Zomeren, Spears, Fischer, & Leach, 2004). Research supporting this model has, however, focused entirely on relatively normative actions such as participating in demonstrations. We argue that the relations between emotions, efficacy, and action differ for more extreme, nonnormative actions and propose (a) that nonnormative actions are often driven by a sense of low efficacy and (b) that contempt, which, unlike anger, entails psychological distancing and a lack of reconciliatory intentions, predicts nonnormative action. These ideas were tested in 3 survey studies examining student protests against tuition fees in Germany (N = 332), Indian Muslims' action support in relation to ingroup disadvantage (N = 156), and British Muslims' responses to British foreign policy (N = 466). Results were generally supportive of predictions and indicated that (a) anger was strongly related to normative action but overall unrelated or less strongly related to nonnormative action, (b) contempt was either unrelated or negatively related to normative action but significantly positively predicted nonnormative action, and (c) efficacy was positively related to normative action and negatively related to nonnormative action. The implications of these findings for understanding and dealing with extreme intergroup phenomena such as terrorism are discussed. PsycINFO Database Record (c) 2011 APA, all rights reserved

The Spillover Effects of Affirmative Action on Competitiveness and Unethical Behavior

DEFF Research Database (Denmark)

Banerjee, Ritwik; Gupta, Nabanita Datta; Villeval, Marie Claire

We conduct an artefactual field experiment to examine various spillover effects of Affirmative Action policies in the context of castes in India. We test a) if individuals who compete in the presence of Affirmative Action policies remain competitive in the same proportion after the policy has been...... frequently a tournament payment scheme. However, we find no spillover effect on confidence and competitiveness once Affirmative Action is withdrawn: any lower caste’s gain in competitiveness due to the policy is then entirely wiped out. Furthermore, the strong existing bias of the dominant caste against...... the lower caste is not significantly aggravated by Affirmative Action....

The quantum Zeno and anti-Zeno effects with strong system-environment coupling.

Science.gov (United States)

Chaudhry, Adam Zaman

2017-05-11

To date, studies of the quantum Zeno and anti-Zeno effects focus on quantum systems that are weakly interacting with their environment. In this paper, we investigate what happens to a quantum system under the action of repeated measurements if the quantum system is strongly interacting with its environment. We consider as the quantum system a single two-level system coupled strongly to a collection of harmonic oscillators. A so-called polaron transformation is then used to make the problem in the strong system-environment coupling regime tractable. We find that the strong coupling case exhibits quantitative and qualitative differences as compared with the weak coupling case. In particular, the effective decay rate does not depend linearly on the spectral density of the environment. This then means that, in the strong coupling regime that we investigate, increasing the system-environment coupling strength can actually decrease the effective decay rate. We also consider a collection of two-level atoms coupled strongly with a common environment. In this case, we find that there are further differences between the weak and strong coupling cases since the two-level atoms can now indirectly interact with one another due to the common environment.

Investigating conceptions of intentional action by analyzing participant generated scenarios

Science.gov (United States)

Skulmowski, Alexander; Bunge, Andreas; Cohen, Bret R.; Kreilkamp, Barbara A. K.; Troxler, Nicole

2015-01-01

We describe and report on results of employing a new method for analyzing lay conceptions of intentional and unintentional action. Instead of asking people for their conceptual intuitions with regard to construed scenarios, we asked our participants to come up with their own scenarios and to explain why these are examples of intentional or unintentional actions. By way of content analysis, we extracted contexts and components that people associated with these action types. Our participants associated unintentional actions predominantly with bad outcomes for all persons involved and linked intentional actions more strongly to positive outcomes, especially concerning the agent. People’s conceptions of intentional action seem to involve more aspects than commonly assumed in philosophical models of intentional action that solely stress the importance of intentions, desires, and beliefs. The additional aspects include decisions and thoughts about the action. In addition, we found that the criteria that participants generated for unintentional actions are not a mere inversion of those used in explanations for intentional actions. Associations between involuntariness and unintentional action seem to be stronger than associations between aspects of voluntariness and intentional action. PMID:26594182

Dynamic modeling method of the bolted joint with uneven distribution of joint surface pressure

Science.gov (United States)

Li, Shichao; Gao, Hongli; Liu, Qi; Liu, Bokai

2018-03-01

The dynamic characteristics of the bolted joints have a significant influence on the dynamic characteristics of the machine tool. Therefore, establishing a reasonable bolted joint dynamics model is helpful to improve the accuracy of machine tool dynamics model. Because the pressure distribution on the joint surface is uneven under the concentrated force of bolts, a dynamic modeling method based on the uneven pressure distribution of the joint surface is presented in this paper to improve the dynamic modeling accuracy of the machine tool. The analytic formulas between the normal, tangential stiffness per unit area and the surface pressure on the joint surface can be deduced based on the Hertz contact theory, and the pressure distribution on the joint surface can be obtained by the finite element software. Futhermore, the normal and tangential stiffness distribution on the joint surface can be obtained by the analytic formula and the pressure distribution on the joint surface, and assigning it into the finite element model of the joint. Qualitatively compared the theoretical mode shapes and the experimental mode shapes, as well as quantitatively compared the theoretical modal frequencies and the experimental modal frequencies. The comparison results show that the relative error between the first four-order theoretical modal frequencies and the first four-order experimental modal frequencies is 0.2% to 4.2%. Besides, the first four-order theoretical mode shapes and the first four-order experimental mode shapes are similar and one-to-one correspondence. Therefore, the validity of the theoretical model is verified. The dynamic modeling method proposed in this paper can provide a theoretical basis for the accurate dynamic modeling of the bolted joint in machine tools.

Corrective Action Investigation Plan for Corrective Action Unit 166: Storage Yards and Contaminated Materials, Nevada Test Site, Nevada

International Nuclear Information System (INIS)

David Strand

2006-01-01

Corrective Action Unit 166 is located in Areas 2, 3, 5, and 18 of the Nevada Test Site, which is 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit (CAU) 166 is comprised of the seven Corrective Action Sites (CASs) listed below: (1) 02-42-01, Cond. Release Storage Yd - North; (2) 02-42-02, Cond. Release Storage Yd - South; (3) 02-99-10, D-38 Storage Area; (4) 03-42-01, Conditional Release Storage Yard; (5) 05-19-02, Contaminated Soil and Drum; (6) 18-01-01, Aboveground Storage Tank; and (7) 18-99-03, Wax Piles/Oil Stain. These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives. Additional information will be obtained by conducting a corrective action investigation (CAI) before evaluating corrective action alternatives and selecting the appropriate corrective action for each CAS. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. The sites will be investigated based on the data quality objectives (DQOs) developed on February 28, 2006, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture; and Bechtel Nevada. The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 166. Appendix A provides a detailed discussion of the DQO methodology and the DQOs specific to each CAS. The scope of the CAI for CAU 166 includes the following activities: (1) Move surface debris and/or materials, as needed, to facilitate sampling. (2) Conduct radiological surveys. (3) Perform field screening. (4) Collect and submit environmental samples for laboratory analysis to determine if

Corrective Action Investigation Plan for Corrective Action Unit 190: Contaminated Waste Sites Nevada Test Site, Nevada, Rev. No.: 0

International Nuclear Information System (INIS)

Wickline, Alfred

2006-01-01

Corrective Action Unit (CAU) 190 is located in Areas 11 and 14 of the Nevada Test Site, which is 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 190 is comprised of the four Corrective Action Sites (CASs) listed below: (1) 11-02-01, Underground Centrifuge; (2) 11-02-02, Drain Lines and Outfall; (3) 11-59-01, Tweezer Facility Septic System; and (4) 14-23-01, LTU-6 Test Area. These sites are being investigated because existing information is insufficient on the nature and extent of potential contamination to evaluate and recommend corrective action alternatives. Additional information will be obtained before evaluating corrective action alternatives and selecting the appropriate corrective action for each CAS by conducting a corrective action investigation (CAI). The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. The sites will be investigated based on the data quality objectives (DQOs) developed on August 24, 2006, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy, National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture, and National Security Technologies, LLC. The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 190. The scope of the CAU 190 CAI includes the following activities: (1) Move surface debris and/or materials, as needed, to facilitate sampling; (2) Conduct radiological and geophysical surveys; (3) Perform field screening; (4) Collect and submit environmental samples for laboratory analysis to determine whether contaminants of concern (COCs) are present; (5) If COCs are present, collect additional step-out samples to define the lateral and vertical extent of the contamination; (6) Collect samples of source material, if present

Corrective Action Investigation Plan for Corrective Action Unit 561: Waste Disposal Areas, Nevada Test Site, Nevada with ROTC 1, Revision 0

Energy Technology Data Exchange (ETDEWEB)

Grant Evenson

2008-07-01

Corrective Action Unit (CAU) 561 is located in Areas 1, 2, 3, 5, 12, 22, 23, and 25 of the Nevada Test Site, which is approximately 65 miles northwest of Las Vegas, Nevada. Corrective Action Unit 561 is comprised of the 10 corrective action sites (CASs) listed below: • 01-19-01, Waste Dump • 02-08-02, Waste Dump and Burn Area • 03-19-02, Debris Pile • 05-62-01, Radioactive Gravel Pile • 12-23-09, Radioactive Waste Dump • 22-19-06, Buried Waste Disposal Site • 23-21-04, Waste Disposal Trenches • 25-08-02, Waste Dump • 25-23-21, Radioactive Waste Dump • 25-25-19, Hydrocarbon Stains and Trench These sites are being investigated because existing information on the nature and extent of potential contamination is insufficient to evaluate and recommend corrective action alternatives. Additional information will be obtained by conducting a corrective action investigation before evaluating corrective action alternatives and selecting the appropriate corrective action for each CAS. The results of the field investigation will support a defensible evaluation of viable corrective action alternatives that will be presented in the Corrective Action Decision Document. The sites will be investigated based on the data quality objectives (DQOs) developed on April 28, 2008, by representatives of the Nevada Division of Environmental Protection; U.S. Department of Energy (DOE), National Nuclear Security Administration Nevada Site Office; Stoller-Navarro Joint Venture; and National Security Technologies, LLC. The DQO process was used to identify and define the type, amount, and quality of data needed to develop and evaluate appropriate corrective actions for CAU 561. Appendix A provides a detailed discussion of the DQO methodology and the DQOs specific to each CAS. The scope of the Corrective Action Investigation for CAU 561 includes the following activities: • Move surface debris and/or materials, as needed, to facilitate sampling. • Conduct radiological surveys

Quantifying the impact of transient joint symptoms, chronic joint symptoms, and arthritis: a population-based approach.

Science.gov (United States)

Busija, Lucy; Buchbinder, Rachelle; Osborne, Richard H

2009-10-15

To estimate the prevalence and co-occurrence of self-reported doctor-diagnosed arthritis, chronic joint symptoms (pain, aching, stiffness, or swelling on most days for a month), and transient joint symptoms (pain, aching, stiffness, or swelling but not on most days for a month), and to compare the sociodemographic characteristics, activity limitations, and health-related quality of life (HRQOL) of people with joint conditions with those who have no self-reported doctor-diagnosed arthritis and no joint symptoms. Data from the 2004 population-based South Australian Health Omnibus Survey (n = 2,840, ages 18-96 years) were used in the study. Activity limitations were assessed using 10 activity limitations questions from the Short Form 36 health survey. HRQOL was assessed using the Assessment of Quality of Life scale. Half of all respondents reported having joint problems, with 26%, 11%, and 13% reporting self-reported doctor-diagnosed arthritis, chronic joint symptoms, and transient joint symptoms, respectively. Chronic joint conditions (self-reported doctor-diagnosed arthritis and chronic joint symptoms) accounted for 74% of all joint problems and were associated with higher odds of activity limitations and poorer HRQOL. The frequency of transient and chronic joint symptoms was highest among middle-aged participants (ages 45-54 years for transient and 45-64 years for chronic joint symptoms) and those who had a body mass index in the obese range. Prevalence of self-reported doctor-diagnosed arthritis increased with age and was higher among women and those who were overweight or obese. This study documented the high prevalence and impact of joint conditions in the community. Chronic joint conditions affect daily life and are substantial barriers for effective public health interventions aimed at reducing obesity and inactivity.

Joint Residence-Workplace Location Choice Model Based on Household Decision Behavior

Directory of Open Access Journals (Sweden)

Pengpeng Jiao

2015-01-01

Full Text Available Residence location and workplace are the two most important urban land-use types, and there exist strong interdependences between them. Existing researches often assume that one choice dimension is correlated to the other. Using the mixed logit framework, three groups of choice models are developed to illustrate such choice dependencies. First, for all households, this paper presents a basic methodology of the residence location and workplace choice without decision sequence based on the assumption that the two choice behaviors are independent of each other. Second, the paper clusters all households into two groups, choosing residence or workplace first, and formulates the residence location and workplace choice models under the constraint of decision sequence. Third, this paper combines the residence location and workplace together as the choice alternative and puts forward the joint choice model. A questionnaire survey is implemented in Beijing city to collect the data of 1994 households. Estimation results indicate that the joint choice model fits the data significantly better, and the elasticity effects analyses show that the joint choice model reflects the influences of relevant factors to the choice probability well and leads to the job-housing balance.

Multiple joint muscle function with ageing: the force-velocity and power-velocity relationships in young and older men.

Science.gov (United States)

Allison, Sarah J; Brooke-Wavell, Katherine; Folland, Jonathan P

2013-05-01

Whilst extensive research has detailed the loss of muscle strength with ageing for isolated single joint actions, there has been little attention to power production during more functionally relevant multiple joint movements. The extent to which force or velocity are responsible for the loss in power with ageing is also equivocal. The aim of this study was to evaluate the contribution of force and velocity to the differences in power with age by comparing the force-velocity and power-velocity relationships in young and older men during a multiple joint leg press movement. Twenty-one older men (66 ± 3 years) and twenty-three young men (24 ± 2 years) completed a series of isometric (maximum and explosive) and dynamic contractions on a leg press dynamometer instrumented to record force and displacement. The force-velocity relationship was lower for the older men as reflected by their 19 % lower maximum isometric strength (p decrement in force was greater and therefore the major explanation for the attenuation of power during a functionally relevant multiple joint movement.

The dependence level analysis between the human actions in NPP Operation

International Nuclear Information System (INIS)

Farcasiu, M.; Nitoi, M.; Apostol, M.; Florescu, G.; Prisecaru, Ilie

2009-01-01

The Human Reliability Analysis (HRA) is an important method in Probabilistic Safety Assessment (PSA) studies and offers desirability for concrete improvement of the man - machine - organization interfaces, reliability and safety. An important step in HRA is the dependence level analysis between the human actions performed by the same person or between the actions performed by different persons, step in quantitative analysis of the human errors probabilities. The purpose of this paper is to develop a model to analyze the dependence level between human actions for Nuclear Power Plant (NPP) operation. The model estimates the conditional human error probabilities (CHEP) and joint human error probabilities (JHEP). The achieved sensitivity analyses determine human performance sensibility to systematic variations for dependence level between human actions. The human error probabilities estimated in this paper are adequate values for integration both in HRA and in PSA realized for NPP. This type of analysis helps in finding and analyzing the ways of reducing the likelihood of human errors, so that the impact of human factor to systems availability, reliability and safety can be realistically estimated. In order to demonstrate the usability of this model an analysis is performed upon the dependences between the necessary human actions in mitigating the consequences of LOCA events, particularly for the case of Cernavoda NPP. (authors)

Human movement analysis using stereophotogrammetry. Part 4: assessment of anatomical landmark misplacement and its effects on joint kinematics.

Science.gov (United States)

Della Croce, Ugo; Leardini, Alberto; Chiari, Lorenzo; Cappozzo, Aurelio

2005-02-01

Estimating the effects of different sources of error on joint kinematics is crucial for assessing the reliability of human movement analysis. The goal of the present paper is to review the different approaches dealing with joint kinematics sensitivity to rotation axes and the precision of anatomical landmark determination. Consistent with the previous papers in this series, the review is limited to studies performed with video-based stereophotogrammetric systems. Initially, studies dealing with estimates of precision in determining the location of both palpable and internal anatomical landmarks are reviewed. Next, the effects of anatomical landmark position uncertainty on anatomical frames are shown. Then, methods reported in the literature for estimating error propagation from anatomical axes location to joint kinematics are described. Interestingly, studies carried out using different approaches reported a common conclusion: when joint rotations occur mainly in a single plane, minor rotations out of this plane are strongly affected by errors introduced at the anatomical landmark identification level and are prone to misinterpretation. Finally, attempts at reducing joint kinematics errors due to anatomical landmark position uncertainty are reported. Given the relevance of this source of errors in the determination of joint kinematics, it is the authors' opinion that further efforts should be made in improving the reliability of the joint axes determination.

Flat H Frangible Joint Evolution

Science.gov (United States)

Diegelman, Thomas E.; Hinkel, Todd J.; Benjamin, Andrew; Rochon, Brian V.; Brown, Christopher W.

2016-01-01

Space vehicle staging and separation events require pyrotechnic devices. They are single-use mechanisms that cannot be tested, nor can failure-tolerant performance be demonstrated in actual flight articles prior to flight use. This necessitates the implementation of a robust design and test approach coupled with a fully redundant, failure-tolerant explosive mechanism to ensure that the system functions even in the event of a single failure. Historically, NASA has followed the single failure-tolerant (SFT) design philosophy for all human-rated spacecraft, including the Space Shuttle Program. Following the end of this program, aerospace companies proposed building the next generation human-rated vehicles with off-the-shelf, non-redundant, zero-failure-tolerant (ZFT) separation systems. Currently, spacecraft and launch vehicle providers for both the Orion and Commercial Crew Programs (CCPs) plan to deviate from the heritage safety approach and NASA's SFT human rating requirements. Both programs' partners have base-lined ZFT frangible joints for vehicle staging and fairing separation. These joints are commercially available from pyrotechnic vendors. Non-human-rated missions have flown them numerous times. The joints are relatively easy to integrate structurally within the spacecraft. In addition, the separation event is debris free, and the resultant pyro shock is lower than that of other design solutions. It is, however, a serious deficiency to lack failure tolerance. When used for critical applications on human-rated vehicles, a single failure could potentially lead to loss of crew (LOC) or loss of mission (LOM)). The Engineering and Safety & Mission Assurance directorates within the NASA Johnson Space Center took action to address this safety issue by initiating a project to develop a fully redundant, SFT frangible joint design, known as the Flat H. Critical to the ability to retrofit on launch vehicles being developed, the SFT mechanisms must fit within the same

The influence of action-effect anticipation on bistable perception: Differences between onset rivalry and ambiguous motion

NARCIS (Netherlands)

Dogge, M.; Gayet, S.; Custers, R.; Aarts, H.A.G.

2018-01-01

Perception is strongly shaped by the actions we perform. According to the theory of event coding, and forward models of motor control, goal-directed action preparation activates representations of desired effects. These expectations about the precise stimulus identity of one's action-outcomes (i.e.

Learning Joint-Sparse Codes for Calibration-Free Parallel MR Imaging.

Science.gov (United States)

Wang, Shanshan; Tan, Sha; Gao, Yuan; Liu, Qiegen; Ying, Leslie; Xiao, Taohui; Liu, Yuanyuan; Liu, Xin; Zheng, Hairong; Liang, Dong

2018-01-01

The integration of compressed sensing and parallel imaging (CS-PI) has shown an increased popularity in recent years to accelerate magnetic resonance (MR) imaging. Among them, calibration-free techniques have presented encouraging performances due to its capability in robustly handling the sensitivity information. Unfortunately, existing calibration-free methods have only explored joint-sparsity with direct analysis transform projections. To further exploit joint-sparsity and improve reconstruction accuracy, this paper proposes to Learn joINt-sparse coDes for caliBration-free parallEl mR imaGing (LINDBERG) by modeling the parallel MR imaging problem as an - - minimization objective with an norm constraining data fidelity, Frobenius norm enforcing sparse representation error and the mixed norm triggering joint sparsity across multichannels. A corresponding algorithm has been developed to alternatively update the sparse representation, sensitivity encoded images and K-space data. Then, the final image is produced as the square root of sum of squares of all channel images. Experimental results on both physical phantom and in vivo data sets show that the proposed method is comparable and even superior to state-of-the-art CS-PI reconstruction approaches. Specifically, LINDBERG has presented strong capability in suppressing noise and artifacts while reconstructing MR images from highly undersampled multichannel measurements.

The diagnostic protocol for evaluation of periprosthetic joint infection

Directory of Open Access Journals (Sweden)

Alen Mlekuž

2015-06-01

Full Text Available Infection is becoming the most important as well as the most devastating mechanism of prosthetic joint failure. The incidence is increasing due to increased sensitivity of orthopedic surgeons for this diagnosis, better diagnostics, and  because the absolute number of operated patients is increasing and because more often very sick, debilitated, and immunocompromised patients are operated on. The trend shows the incidence to further increase in the years to come. The diagnosis may be very easy in case of high grade processes, but also extremely difficult in low grade infections. Misdiagnosing infection leads to repeat early failures and revisions that are distressing for patients as well as for surgeons. To avoid failures related to misdiagnosed prosthetic joint infections a step-wise algorithm of action is proposed and the diagnostic strength of the steps discussed. The key point is to select the potential candidates to define the possibility of an ongoing infection and then to select the tools to strengthen the suspicion. The further procedures base on the analysis of the pseudo-synovial fluid obtained by aspiration. The diagnostic conclusions form the basis for considered treatment decisions.

Effect of process parameters on microstructure and mechanical properties of friction stir welded joints: A review

Science.gov (United States)

Wanare, S. P.; Kalyankar, V. D.

2018-04-01

Friction stir welding is emerging as a promising technique for joining of lighter metal alloys due to its several advantages over conventional fusion welding processes such as low thermal distortion, good mechanical properties, fine weld joint microstructure, etc. This review article mainly focuses on analysis of microstructure and mechanical properties of friction stir welded joints. Various microstructure characterization techniques used by previous researchers such as optical microscopes, x-ray diffraction, electron probe microscope, transmission electron microscope, scanning electron microscopes with electron back scattered diffraction, electron dispersive microscopy, etc. are thoroughly overviewed and their results are discussed. The effects of friction stir welding process parameters such as tool rotational speed, welding speed, tool plunge depth, axial force, tool shoulder diameter to tool pin diameter ratio, tool geometry etc. on microstructure and mechanical properties of welded joints are studied and critical observations are noted down. The microstructure examination carried out by previous researchers on various zones of welded joints such as weld zone, heat affected zone and base metal are studied and critical remarks have been presented. Mechanical performances of friction stir welded joints based on tensile test, micro-hardness test, etc. are discussed. This article includes exhaustive literature review of standard research articles which may become ready information for subsequent researchers to establish their line of action.

Can symptomatic acromioclavicular joints be differentiated from asymptomatic acromioclavicular joints on 3-T MR imaging?

Science.gov (United States)

Choo, Hye Jung; Lee, Sun Joo; Kim, Jung Han; Cha, Seong Sook; Park, Young Mi; Park, Ji Sung; Lee, Jun Woo; Oh, Minkyung

2013-04-01

To evaluate retrospectively whether symptomatic acromioclavicular joints can be differentiated from asymptomatic acromioclavicular joints on 3-T MR imaging. This study included 146 patients who underwent physical examination of acromioclavicular joints and 3-T MR imaging of the shoulder. Among them, 67 patients showing positive results on physical examination were assigned to the symptomatic group, whereas 79 showing negative results were assigned to the asymptomatic group. The following MR findings were compared between the symptomatic and asymptomatic groups: presence of osteophytes, articular surface irregularity, subchondral cysts, acromioclavicular joint fluid, subacromial fluid, subacromial bony spurs, joint capsular distension, bone edema, intraarticular enhancement, periarticular enhancement, superior and inferior joint capsular distension degree, and joint capsular thickness. The patients were subsequently divided into groups based on age (younger, older) and the method of MR arthrography (direct MR arthrography, indirect MR arthrography), and all the MR findings in each subgroup were reanalyzed. The meaningful cutoff value of each significant continuous variable was calculated using receiver operating characteristic analysis. The degree of superior capsular distension was the only significant MR finding of symptomatic acromioclavicular joints and its meaningful cutoff value was 2.1mm. After subgroup analyses, this variable was significant in the older age group and indirect MR arthrography group. On 3-T MR imaging, the degree of superior joint capsular distension might be a predictable MR finding in the diagnosis of symptomatic acromioclavicular joints. Copyright © 2012 Elsevier Ireland Ltd. All rights reserved.

MP Joint Arthritis

Science.gov (United States)

... All Topics A-Z Videos Infographics Symptom Picker Anatomy Bones Joints Muscles Nerves Vessels Tendons About Hand Surgery What is a Hand Surgeon? What is a Hand Therapist? Media Find a Hand Surgeon Home Anatomy MP Joint Arthritis Email to a friend * required ...

Role and reliability of passive joint motion assessment: Towards multivariable diagnostics and decision-making in manual therapy

NARCIS (Netherlands)

van Trijffel, E.

2015-01-01

Manual therapists strongly rely on passive intervertebral motion (PIVM) assessment for making decisions about spinal joint mobilisation and thrust manipulation in patients with neck or low-back pain. However, uncertainty exists about the use and the value of this physical examination procedure

Functional disorders of the temporomandibular joints: Internal derangement of the temporomandibular joint.

Science.gov (United States)

Chang, Chih-Ling; Wang, Ding-Han; Yang, Mu-Chen; Hsu, Wun-Eng; Hsu, Ming-Lun

2018-04-01

Temporomandibular joint (TMJ) is one of the most complex joints of the human body. Due to its unique movement, in terms of combination of rotation and translator movement, disc of the joint plays an important role to maintain its normal function. In order to sustain the normal function of the TMJ, disc must be kept in proper position as well as maintain normal shape in all circumstances. Once the disc is not any more in its normal position during function of the joint, disturbance of the joint can be occurred which will lead to subsequent distortion of the disc. Shape of the disc can be influenced by many factors i.e.: abnormal function or composition of the disc itself. Etiology of the internal derangement of the disc remains controversial. Multifactorial theory has been postulated in most of previous manuscripts. Disc is composed of mainly extracellular matrix. Abnormal proportion of collagen type I & III may also leads to joint hypermobility which may be also a predisposing factor of this disorder. Thus it can be recognized as local manifestation of a systemic disorder. Different treatment modalities with from conservative treatment to surgical intervention distinct success rate have been reported. Recently treatment with extracellular matrix injection becomes more and more popular to strengthen the joint itself. Since multifactorial in character, the best solution of the treatment modalities should be aimed to resolve possible etiology from different aspects. Team work may be indication to reach satisfied results. Copyright © 2018. Published by Elsevier Taiwan.

Effect of joint design on ballistic performance of quenched and tempered steel welded joints

International Nuclear Information System (INIS)

Balakrishnan, M.; Balasubramanian, V.; Madhusudhan Reddy, G.

2014-01-01

Highlights: • Traditional usage of austenitic stainless steel filler for armour steel welding shows poor ballistic performance. • Earlier efforts show dubious success on ballistic resistance of armour steel joints. • Comparative evaluation of equal/unequal joint design on ballistic performance. • Effect of joint design covers the main aspects of successful bullet stoppage. - Abstract: A study was carried out to evaluate the effect of joint design on ballistic performance of armour grade quenched and tempered steel welded joints. Equal double Vee and unequal double Vee joint configuration were considered in this study. Targets were fabricated using 4 mm thick tungsten carbide hardfaced middle layer; above and below which austenitic stainless steel layers were deposited on both sides of the hardfaced interlayer in both joint configurations. Shielded metal arc welding process was used to deposit for all layers. The fabricated targets were evaluated for its ballistic performance and the results were compared in terms of depth of penetration on weld metal. From the ballistic test results, it was observed that both the targets successfully stopped the bullet penetration at weld center line. Of the two targets, the target made with unequal double Vee joint configuration offered maximum resistance to the bullet penetration at weld metal location without any bulge at the rear side. The higher volume of austenitic stainless steel front layer and the presence of hardfaced interlayer after some depth of soft austenitic stainless steel front layer is the primary reason for the superior ballistic performance of this joint

Early actions in decontamination after nuclear power accidents, guidelines for planning

International Nuclear Information System (INIS)

Ulvsand, T.; Andersson, K.G.; Hansen, J.H.; Preuthun, J.; Sinkko, K.; Svennerstedt, G.; Uhnger, S.

1997-01-01

The target group for this document consists mainly of persons in charge of making plans for the actions in case of a radioactive release, persons found at different levels in the preparedness organisations. This report builds on a joint Nordic project, from which a basic report has been published (NKS-EKO--5(96)-18, INIS 28-021176), which is useful to experts. The work has extracted seven actions which can be classed as early: Hosing of roofs, walls, and paved areas; Lawn mowing; Pruning of trees and bushes; Removal of snow; and Vacuum cleaning of streets. For a reference deposition of 1 Mbq/m 2 of 137 Cs, calculations have been performed in five urban or suburban areas such as detached wooden or brick houses, semi-detached houses, terrace houses and city centre multi-storey houses. In case of dry or wet deposition, the report describes the expected effects of the various actions and the practical, economical and protective-relevant consequences generated by them. The actions giving the largest effects, measured as reduction in life time dose reduction, are lawn mowing, removal of snow and pruning of trees and bushes. The document finally discuss clean-up actions and their effects on the rural living environments. The actions will be the same as those taken in the urban areas, but there is a difference in the performance. In urban areas, the actions will to a great extent be performed by the society. In rural areas, the equipment and experience needed exist on the farms, and the inhabitants will perform the clean-up actions themselves

CHANGES IN PATELLOFEMORAL JOINT STRESS DURING RUNNING WITH THE APPLICATION OF A PREFABRICATED FOOT ORTHOTIC.

Science.gov (United States)

Almonroeder, Thomas G; Benson, Lauren C; O'Connor, Kristian M

2015-12-01

Foot orthotics are commonly utilized in the treatment of patellofemoral pain (PFP) and have shown clinical benefit; however, their mechanism of action remains unclear. Patellofemoral joint stress (PFJS) is thought to be one of the main etiological factors associated with PFP. The primary purpose of this study was to investigate the effects of a prefabricated foot orthotic with 5 ° of medial rearfoot wedging on the magnitude and the timing of the peak PFJS in a group of healthy female recreational athletes. The hypothesis was that there would be significant reduction in the peak patellofemoral joint stress and a delay in the timing of this peak in the orthotic condition. Cross-sectional. Kinematic and kinetic data were collected during running trials in a group of healthy, female recreational athletes. The knee angle and moment data in the sagittal plane were incorporated into a previously developed model to estimate patellofemoral joint stress. The dependent variables of interest were the peak patellofemoral joint stress as well as the percentage of stance at which this peak occurred, as both the magnitude and the timing of the joint loading are thought to be important in overuse running injuries. The peak patellofemoral joint stress significantly increased in the orthotic condition by 5.8% (p=.02, ES=0.24), which does not support the initial hypothesis. However, the orthotic did significantly delay the timing of the peak during the stance phase by 3.8% (p=.002, ES=0.47). The finding that the peak patellofemoral joint stress increased in the orthotic condition did not support the initial hypothesis. However, the finding that the timing of this peak was delayed to later in the stance phase in the orthotic condition did support the initial hypothesis and may be related to the clinical improvements previously reported in subjects with PFP. Level 4.

Bistable Articulated Joint

Science.gov (United States)

Graighead, Norwood D., II; Preliasco, R. J.; Hult, T. D.

1986-01-01

Joint with four-bar-linkage geometry has following attributes: Springs to fully extended fully folded positions. Automatically locks in its extended position. Joint combines zero backlash, positive locking, and centerline pivoting. Used in folding tool handles, portable antenna booms, and many other deployable structures.

[Classification and Treatment of Sacroiliac Joint Dislocation].

Science.gov (United States)

Tan, Zhen; Huang, Zhong; Li, Liang; Meng, Wei-Kun; Liu, Lei; Zhang, Hui; Wang, Guang-Lin; Huang, Fu-Guo

2017-09-01

To develop a renewed classification and treatment regimen for sacroiliac joint dislocation. According to the direction of dislocation of sacroiliac joint,combined iliac,sacral fractures,and fracture morphology,sacroiliac joint dislocation was classified into 4 types. Type Ⅰ (sacroiliac anterior dislocation): main fracture fragments of posterior iliac wing dislocated in front of sacroiliac joint. Type Ⅱ (sacroiliac posterior dislocation): main fracture fragments of posterior iliac wing dislocated in posterior of sacroiliac joint. Type Ⅲ (Crescent fracturedislocation of the sacroiliac joint): upward dislocation of posterior iliac wing with oblique fracture through posterior iliac wing. Type ⅢA: a large crescent fragment and dislocation comprises no more than onethird of sacroiliac joint,which is typically inferior. Type ⅢB: intermediatesize crescent fragment and dislocation comprises between one and twothirds of joint. Type ⅢC: a small crescent fragment where dislocation comprises most,but not the entire joint. Different treatment regimens were selected for different types of fractures. Treatment for type Ⅰ sacroiliac joint dislocation: anterior iliac fossa approach pry stripping reset; sacroiliac joint fixed with sacroiliac screw through percutaneous. Treatment for type Ⅱ sacroiliac joint dislocation: posterior sacroiliac joint posterior approach; sacroiliac joint fixed with sacroiliac screw under computer guidance. Treatment for type ⅢA and ⅢB sacroiliac joint dislocation: posterior sacroiliac joint approach; sacroiliac joint fixed with reconstruction plate. Treatment for type ⅢC sacroiliac joint dislocation: sacroiliac joint closed reduction; sacroiliac joint fixed with sacroiliac screw through percutaneous. Treatment for type Ⅳ sacroiliac joint dislocation: posterior approach; sacroiliac joint fixed with spinal pelvic fixation. Results of 24 to 72 months patient follow-up (mean 34.5 months): 100% survival,100% wound healing,and 100

Analysis of movement axes of the ankle and subtalar joints: relationship with the articular surfaces of the talus.

Science.gov (United States)

Cho, Ho-Jung; Kwak, Dai-Soon; Kim, In-Beom

2014-10-01

Bone shape varies among human populations, and in the case of articular joints, the shape of the articulating surfaces strongly influences joint movement. In this study, we aimed to analyse the axes of the talocrural and subtalar joints, using the talar articular surface method, and compare these results with those of the previous studies. We used three-dimensional reconstruction models of tali among Korean individuals. The axes of the talocrural and subtalar joints were calculated by using the least-square sphere fitting method, and the principal axis was used for reference coordination. The shape of the talus was classified based on the shape of its anterior, middle, and posterior calcaneal facets, and the talar shape was compared with the movement axes. The movement axes did not differ according to the type of calcaneal facets of the talus. Interestingly, we also noted that the axes of the talocrural and subtalar joints in this study differed significantly from those reported in the previous studies; these differences may be due to variations in the shape of the bones. © IMechE 2014.

Reliability of agriculture universal joint shafts based on temperature measuring in universal joint bearing assemblies

Directory of Open Access Journals (Sweden)

Аleksandar Asonja

2015-03-01

Full Text Available This paper presents a research into reliability calculations of agriculture double universal joint shafts based on temperature measuring in cardan-type universal joint bearing assemblies. Special laboratory equipment was developed for this research which is presented in the paper. The objective of this research was to test the real life span of universal joint shafts in the laboratory and in field, to obtain the results which can be used to improve the reliability of universal joint shafts. If the presented research were used along with maintenance measures recommended in the paper and with proper use, the level of reliability of the shafts would be 2.1 times higher. The presented results of the research showed that needle bearings, i.e. bearing assemblies of the joints, are the most critical elements on universal joint shafts and are possible causes of their lower reliability. The second universal joint is the part with the lowest reliability in the observed technical system.

Facet joint syndrome

International Nuclear Information System (INIS)

Zigrai, M.; Zakovic, J.; Brezinova, M.; Pavlovicova, M.

2002-01-01

It is the purpose of the study to demonstrate the clinical relevance of degenerative changes in the facet joint of patients with low back pain irradiating to the lower extremities, and discuss some problems relating to diagnosis and different diagnosis. 119 patients presenting the listed bellow syndromes are covered by the study: scoliosis, polytopic pain vertebral syndrome, paresis and history of trauma. all patients undergo comprehensive neurological examination with special attention focused on the spine: CT and plain x-rays are taken of the lumbosacral segment to assess the condition of the facet joints. The neurological examination demonstrates in all cases pain syndrome in the lumbar spine referred to one or both lower extremities. In 56% it is a matter of persisting pain, and in 44% - recurrent. More than half of the patients complain of sacroiliac (SI) dislocation and palpatory pain. Unilateral or bilateral degenerative changes are documented by imaging studies in all patients, including: subchondral thickening, osteopathy narrowing the lateral or central part of the spinal canal with ensuing nerve root compression. The lumbosacral zygoapophyseal joints are source of pseudoradicular pain. A correlation between clinical picture and GT changes is noted in all patients with facet joint syndrome. CT is an indispensable method in diagnosing facet joint syndrome. (authors)

Microseismic monitoring of columnar jointed basalt fracture activity: a trial at the Baihetan Hydropower Station, China

Science.gov (United States)

Chen, Bing-Rui; Li, Qing-Peng; Feng, Xia-Ting; Xiao, Ya-Xun; Feng, Guang-Liang; Hu, Lian-Xing

2014-10-01

Severe stress release has occurred to the surrounding rocks of the typically columnar jointed basalt after excavation at the Baihetan Hydropower Station, Jinsha River, China, where cracking, collapse, and other types of failure may take place occasionally due to relaxation fracture. In order to understand the relaxation fracture characteristics of the columnar jointed basalt in the entire excavation process at the diversion tunnel of the Baihetan Hydropower Station, real-time microseismic monitoring tests were performed. First, the applicability of a geophone and accelerometer was analyzed in the columnar jointed basalt tunnel, and the results show that the accelerometer was more applicable to the cracking monitoring of the columnar jointed basalt. Next, the waveform characteristics of the microseismic signals were analyzed, and the microseismic signals were identified as follows: rock fracture signal, drilling signal, electrical signal, heavy vehicle passing signal, and blast signal. Then, the attenuation characteristics of the microseismic signals in the columnar jointed basalt tunnel were studied, as well as the types and characteristics of the columnar jointed basalt fracture. Finally, location analysis was conducted on the strong rock fracture events, in which four or more sensors were triggered, to obtain the temporal and spatial evolution characteristics and laws of the columnar jointed basalt relaxation fracture after excavation. The test results are not only of important reference value to the excavation and support of diversion tunnel at the Baihetan Hydropower Station, but also of great referential significance and value to the conduction of similar tests.

In vitro method for assessing the biomechanics of the patellofemoral joint following total knee arthroplasty.

Science.gov (United States)

Coles, L G; Gheduzzi, S; Miles, A W

2014-12-01

The patellofemoral joint is a common site of pain and failure following total knee arthroplasty. A contributory factor may be adverse patellofemoral biomechanics. Cadaveric investigations are commonly used to assess the biomechanics of the joint, but are associated with high inter-specimen variability and often cannot be carried out at physiological levels of loading. This study aimed to evaluate the suitability of a novel knee simulator for investigating patellofemoral joint biomechanics. This simulator specifically facilitated the extended assessment of patellofemoral joint biomechanics under physiological levels of loading. The simulator allowed the knee to move in 6 degrees of freedom under quadriceps actuation and included a simulation of the action of the hamstrings. Prostheses were implanted on synthetic bones and key soft tissues were modelled with a synthetic analogue. In order to evaluate the physiological relevance and repeatability of the simulator, measurements were made of the quadriceps force and the force, contact area and pressure within the patellofemoral joint using load cells, pressure-sensitive film, and a flexible pressure sensor. The results were in agreement with those previously reported in the literature, confirming that the simulator is able to provide a realistic physiological loading situation. Under physiological loading, average standard deviations of force and area measurements were substantially lower and comparable to those reported in previous cadaveric studies, respectively. The simulator replicates the physiological environment and has been demonstrated to allow the initial investigation of factors affecting patellofemoral biomechanics following total knee arthroplasty. © IMechE 2014.

Lower limb joint work and joint work contribution during downhill and uphill walking at different inclinations.

Science.gov (United States)

Alexander, Nathalie; Strutzenberger, Gerda; Ameshofer, Lisa Maria; Schwameder, Hermann

2017-08-16

Work performance and individual joint contribution to total work are important information for creating training protocols, but were not assessed so far for sloped walking. Therefore, the purpose of this study was to analyze lower limb joint work and joint contribution of the hip, knee and ankle to total lower limb work during sloped walking in a healthy population. Eighteen male participants (27.0±4.7yrs, 1.80±0.05m, 74.5±8.2kg) walked on an instrumented ramp at inclination angles of 0°, ±6°, ±12° and ±18° at 1.1m/s. Kinematic and kinetic data were captured using a motion-capture system (Vicon) and two force plates (AMTI). Joint power curves, joint work (positive, negative, absolute) and each joint's contribution to total lower limb work were analyzed throughout the stance phase using an ANOVA with repeated measures. With increasing inclination positive joint work increased for the ankle and hip joint and in total during uphill walking. Negative joint work increased for each joint and in total work during downhill walking. Absolute work was increased during both uphill (all joints) and downhill (ankle & knee) walking. Knee joint contribution to total negative and absolute work increased during downhill walking while hip and ankle contributions decreased. This study identified, that, when switching from level to a 6° and from 6° to a 12° inclination the gain of individual joint work is more pronounced compared to switching from 12° to an 18° inclination. The results might be used for training recommendations and specific training intervention with respect to sloped walking. Copyright © 2017 Elsevier Ltd. All rights reserved.

Face support for strongly inclined stratification. Strebausbau fuer die stark geneigte Lagerung

Energy Technology Data Exchange (ETDEWEB)