Manufacturing Experience for Oxide Dispersion Strengthened Alloys

Energy Technology Data Exchange (ETDEWEB)

Bennett, Wendy D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Doherty, Ann L. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Henager, Charles H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lavender, Curt A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Montgomery, Robert O. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Omberg, Ronald P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Smith, Mark T. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Webster, Ryan A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-09-22

This report documents the results of the development and the manufacturing experience gained at the Pacific Northwest National Laboratories (PNNL) while working with the oxide dispersion strengthened (ODS) materials MA 956, 14YWT, and 9YWT. The Fuel Cycle Research and Development program of the Office of Nuclear Energy has implemented a program to develop a Uranium-Molybdenum metal fuel for light water reactors. ODS materials have the potential to provide improved performance for the U-Mo concept.

Regional distribution regularity of sandstone uranium deposits in Asian continent and prospecting strategy for sandstone uranium deposits in China

International Nuclear Information System (INIS)

Chen Zuyi

2002-01-01

Since the 1980's, after the discovery of numerous sandstone uranium deposits in Middle Asia (Kazakhstan, Uzbekistan) many large sandstone uranium deposits have been found in both Russia and Mongolia. So that Asia has become the most concentrated region of sandstone uranium deposits. The known sandstone uranium deposits occur mostly in a arcual tectonic belt constrained from the north by the Siberian continental block, and the Tarim-North China continental block from the south. This belt is named by Russian geologists as the Central Asian Mobile Belt, and some Chinese geologists call it the 'Mongolian Arc'. A lot of large and super large metallic, non-metallic, gold, polymetallic, porphyry copper and gold, massive sulphide and uranium deposits (of sandstone and volcanic types) with different origin and various types concentrated occur in this belt. The abundant and colourful mineral resources in the region are closely associated with the specific geologic-tectonic evolution of the above belt. It is necessary to strengthen the detailed geologic research and uranium prospecting in the region

The uranium resources and production of Namibia

International Nuclear Information System (INIS)

Palfi, A.G.

1997-01-01

The promulgation of the Minerals (Prospecting and Mining) Act, 1992, on 1 April 1994 and the simultaneous repeal of restrictive South African legislation on reporting uranium exploration and production results, allowed the Namibian Government for the first time to present information for publication of the report ''Uranium 1995 - Resource, Production and Demand'', by the OECD Nuclear Energy Agency and the IAEA. Namibia, one of the youngest independent nations in Africa, has a large number of uranium occurrences and deposits in several geological environments. The total estimated uranium resource amounts to about 299 thousand tonnes recoverable uranium at a cost of less than US$ 130/kg U, within the known conventional resources category. The most prominent geological type of these is the unique, granite-related uranium occurrences located in the central part of the Namib Desert. Permo-Triassic age Karoo sandstone-hosted uranium deposits were subject to only limited exploration due to the down-turn of uranium prices in the latter part of 1980s, despite they very encouraging exploration results. As only limited Karoo sandstone-covered areas were tested there is still great potential for further discoveries. The planned output of Roessing Uranium Mine at 40,000 tonnes of ore per day which results in an annual production of 4536 tonnes of uranium oxide, was achieved in 1979. In case of improved uranium market conditions, Namibia is in a strong position to increase uranium production and open up new production centres to strengthen the country's position as an important uranium producer in the world. 6 figs, 2 tabs

An “All Teach, All Learn” Approach to Research Capacity Strengthening in Indigenous Primary Health Care Continuous Quality Improvement

Science.gov (United States)

McPhail-Bell, Karen; Matthews, Veronica; Bainbridge, Roxanne; Redman-MacLaren, Michelle Louise; Askew, Deborah; Ramanathan, Shanthi; Bailie, Jodie; Bailie, Ross; Matthews, Veronica

2018-01-01

In Australia, Indigenous people experience poor access to health care and the highest rates of morbidity and mortality of any population group. Despite modest improvements in recent years, concerns remains that Indigenous people have been over-researched without corresponding health improvements. Embedding Indigenous leadership, participation, and priorities in health research is an essential strategy for meaningful change for Indigenous people. To centralize Indigenous perspectives in research processes, a transformative shift away from traditional approaches that have benefited researchers and non-Indigenous agendas is required. This shift must involve concomitant strengthening of the research capacity of Indigenous and non-Indigenous researchers and research translators—all must teach and all must learn. However, there is limited evidence about how to strengthen systems and stakeholder capacity to participate in and lead continuous quality improvement (CQI) research in Indigenous primary health care, to the benefit of Indigenous people. This paper describes the collaborative development of, and principles underpinning, a research capacity strengthening (RCS) model in a national Indigenous primary health care CQI research network. The development process identified the need to address power imbalances, cultural contexts, relationships, systems requirements and existing knowledge, skills, and experience of all parties. Taking a strengths-based perspective, we harnessed existing knowledge, skills and experiences; hence our emphasis on capacity “strengthening”. New insights are provided into the complex processes of RCS within the context of CQI in Indigenous primary health care. PMID:29761095

eLearning, knowledge brokering, and nursing: strengthening collaborative practice in long-term care.

Science.gov (United States)

Halabisky, Brenda; Humbert, Jennie; Stodel, Emma J; MacDonald, Colla J; Chambers, Larry W; Doucette, Suzanne; Dalziel, William B; Conklin, James

2010-01-01

Interprofessional collaboration is vital to the delivery of quality care in long-term care settings; however, caregivers in long-term care face barriers to participating in training programs to improve collaborative practices. Consequently, eLearning can be used to create an environment that combines convenient, individual learning with collaborative experiential learning. Findings of this study revealed that learners enjoyed the flexibility of the Working Together learning resource. They acquired new knowledge and skills that they were able to use in their practice setting to achieve higher levels of collaborative practice. Nurses were identified as team leaders because of their pivotal role in the long-term care home and collaboration with all patient care providers. Nurses are ideal as knowledge brokers for the collaborative practice team. Quantitative findings showed no change in learner's attitudes regarding collaborative practice; however, interviews provided examples of positive changes experienced. Face-to-face collaboration was found to be a challenge, and changes to organizations, systems, and technology need to be made to facilitate this process. The Working Together learning resource is an important first step toward strengthening collaboration in long-term care, and the pilot implementation provides insights that further our understanding of both interprofessional collaboration and effective eLearning.

Strengthening care for injured persons in less developed countries: a case study of Ghana and Mexico.

Science.gov (United States)

Mock, Charles; Arreola-Risa, Carlos; Quansah, Robert

2003-01-01

In all countries, the priority for reducing road traffic injuries should be prevention. Nonetheless, there are low-cost ways to strengthen the care of injured persons, that will help to lower the toll from road traffic. The purpose of this review was to elucidate ways to accomplish this goal in the context of less developed countries. Studies selected for this review were obtained by Medline review, selecting on key words such as trauma, injury, trauma care, essential health services, and developing country. Articles pertaining to any country and all available years were considered. In addition, the authors utilized articles from the gray literature and journals from Mexico and Ghana that are not Medline referenced. Studies surveyed point to road safety and other forms of injury prevention, as well as prehospital care, as likely priorities for developing countries. Nonetheless, hospital-based improvements can contribute to decreases in mortality and, especially, decreases in disability. For both prehospital and hospital based care, studies revealed several critical weak points to address in: (1) human resources (staffing and training); (2) physical resources (equipment, supplies, and infrastructure); and (3) administration and organization. The 'essential services' approach, which has contributed to progress in a variety of fields of international health, needs to be developed for the care of the injured. This would define the trauma treatment services that could realistically be made available to virtually every injured person. It would then address the inputs of human resources, physical resources, and administration necessary to assure these services optimally in the different geographic and socioeconomic environments worldwide. Finally, it would identify and target deficiencies in these inputs that need to be strengthened.

Antenatal care strengthening for improved quality of care in Jimma, Ethiopia: an effectiveness study.

Science.gov (United States)

Villadsen, Sarah Fredsted; Negussie, Dereje; GebreMariam, Abebe; Tilahun, Abebech; Friis, Henrik; Rasch, Vibeke

2015-04-11

Interventions for curing most diseases and save lives of pregnant and delivering women exist, yet the power of health systems to deliver them to those in most need is not sufficient. The aims of this study were to design a participatory antenatal care (ANC) strengthening intervention and assess the implementation process and effectiveness on quality of ANC in Jimma, Ethiopia. The intervention comprised trainings, supervisions, equipment, development of health education material, and adaption of guidelines. It was implemented at public facilities and control sites were included in the evaluation. Improved content of care (physical examinations, laboratory testing, tetanus toxoid (TT)-immunization, health education, conduct of health professionals, and waiting time) were defined as proximal project outcomes and increased quality of care (better identification of health problems and increased overall user satisfaction with ANC) were distal project outcomes. The process of implementation was documented in monthly supervision reports. Household surveys, before (2008) and after (2010) intervention, were conducted amongst all women who had given birth within the previous 12 months. The effect of the intervention was assessed by comparing the change in quality of care from before to after the intervention period at intervention sites, relative to control sites, using logistic mixed effect regression. The continued attention to the ANC provision during implementation stimulated increased priority of ANC among health care providers. The organizational structure of the facilities and lack of continuity in care provision turned out to be a major challenge for implementation. There was a positive effect of the intervention on health education on danger signs during pregnancy (OR: 3.9, 95% CI: 2.6;5.7), laboratory testing (OR for blood tests other than HIV 2.9, 95% CI: 1.9;4.5), health problem identification (OR 1.8, 95% CI: 1.1;3.1), and satisfaction with the service (OR: 0

Optimization of uranium leach mining

International Nuclear Information System (INIS)

Schecter, R.S.; Bommer, P.M.

1982-01-01

The effects of well pattern and well spacing on uranium recovery and oxidant utilization are considered. As expected, formation permeability heterogeneities and anisotropies are found to be important issues requiring careful consideration; however, it also is shown that the oxidant efficiency and the produced uranium solution concentrations are sensitive to the presence of other minerals competing with uranium for oxidant. If the Damkohler number for competing minerals, which measures the speed of the reaction, exceeds that for uranium, the competing mineral will have to be oxidized completely to recover a large proportion of the uranium. If the Damkohler number is smaller, it may be possible to achieve considerable selectivity for uranium by adjusting the well spacing. 9 refs

Uranium industry annual 1994

International Nuclear Information System (INIS)

1995-01-01

The Uranium Industry Annual 1994 (UIA 1994) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing during that survey year. The UIA 1994 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. It contains data for the 10-year period 1985 through 1994 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data collected on the ''Uranium Industry Annual Survey'' (UIAS) provide a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Where aggregate data are presented in the UIA 1994, care has been taken to protect the confidentiality of company-specific information while still conveying accurate and complete statistical data. A feature article, ''Comparison of Uranium Mill Tailings Reclamation in the United States and Canada,'' is included in the UIA 1994. Data on uranium raw materials activities including exploration activities and expenditures, EIA-estimated resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities, including purchases of uranium and enrichment services, and uranium inventories, enrichment feed deliveries (actual and projected), and unfilled market requirements are shown in Chapter 2

Uranium mining and metallurgy library information service under the network environment

International Nuclear Information System (INIS)

Tang Lilei

2012-01-01

This paper analyzes the effect of the network environment on the uranium mining and metallurgy of the information service. Introduces some measures such as strengthening professional characteristic literature resources construction, changing the service mode, building up information navigation, deepening service, meet the individual needs of users, raising librarian's quality, promoting the co-construction and sharing of library information resources, and puts forward the development idea of uranium mining and metallurgy library information service under the network environment. (author)

Preliminary Mass Spectrometric Analysis of Uranium on Environmental Swipe Materials

International Nuclear Information System (INIS)

Cheong, Chang-Sik; Jeong, Youn-Joong; Ryu, Jong-Sik; Shin, Hyung-Seon; Cha, Hyun-Ju; Ahn, Gil-Hoon; Park, Il-Jin; Min, Gyung-Sik

2006-01-01

It is well-known that uranium and plutonium isotopic compositions of safeguards samples are very useful to investigate the history of nuclear activities. To strengthen the capabilities of environmental sampling analysis in the ROK through MOST/DOE collaboration, round robin test for uranium and plutonium was designed in 2003. As the first round robin test, a set of dried uranium-containing solutions (∼35ng and (∼300ng) was distributed to the participating laboratories in November of 2003, with results reported in April of 2004. The KBSI (Korea Basic Science Institute) and ORNL (Oak Ridge National Laboratory) are currently in the process of analyzing uranium on cotton swipes for the second round robin test. As a preliminary test for the second round, KBSI intends to analyze home-made swipe samples into which international uranium standards are added. Here we describe technical steps of sample preparation and mass spectrometry at KBSI, and report some results of the preliminary test

Depending on scientific and technological progress to prospect for superlarge uranium deposits. Across-century target for uranium resources exploration work in China

International Nuclear Information System (INIS)

Shen Feng

1995-01-01

After over 30 years' development, uranium resources exploration work in China has resulted in the discovery of more than 10 economic types of uranium deposits in 23 provinces (regions) of the whole country and large quantities of uranium reserves have been submitted which guarantee the development of nuclear industry in China. However, characteristics such as smaller size of deposits and ore bodies, and lower ore grade of discovered China's uranium deposits have brought about a series of problems on how to economically exploit and utilize these uranium resources. To prospect for superlarge uranium deposits is a guarantee of making uranium resources essentially meet the demand for the long-term development of nuclear industry in China, and is an important way of improving economic benefits in mining China's uranium resources. It is an important mark for uranium geological exploration work to go up a new step as well. China exhibits the geological environment in which various types of superlarge uranium deposits can be formed. Having the financial support from the state to uranium resources exploration work, having professional uranium exploration teams well-experienced in ore prospecting, having modernized uranium exploration techniques and equipment and also having foreign experience in prospecting for superlarge uranium deposits as reference, it is entirely possible to find out superlarge uranium deposits in China at the end of this century and at the beginning of next century. In order to realize the objective, the most important prerequisite is that research work on metallogenetic geological theory and exploration techniques and prospecting methodology for superlarge uranium deposits must be strengthened, and technical quality of the geological teams must be improved. Within this century, prospect targets should be selected and located accurately to carry out the emphatic breakthrough in exploration strategy

Uranium update

International Nuclear Information System (INIS)

Steane, R.

1997-01-01

This paper is about the current uranium mining situation, especially that in Saskatchewan. Canada has a unique advantage with the Saskatchewan uranium deposits. Making the most of this opportunity is important to Canada. The following is reviewed: project development and the time and capital it takes to bring a new project into production; the supply and demand situation to show where the future production fits into the world market; and our foreign competition and how we have to be careful not to lose our opportunity. (author)

Analysis on present radon ventilation situation of Chinese uranium mines

International Nuclear Information System (INIS)

Li Xianjie; Hu Penghua

2010-01-01

Mine Ventilation is the most important way in lowering radon of uranium mines. At present, radon and radon daughter concentration of underground air is 3∼5 times higher than any other air concentration of foreign uranium mines, as the same input for Protective Ventilation between Chinese uranium mines with compaction methodology and international advanced uranium mines. In this passage, through the analysis of Ventilation Radon Reduction status in Chinese uranium mines and the comparison of advantages and shortcomings between variety of ventilation and radon reduction, it illuminated the reasons of higher radon and radon daughter concentration in Chinese uranium mines and put forward some problems in three aspects, which are Ventilation Radon Reduction Theory, Ventilation Radon Reduction Measures and Ventilation Management. And to above problems, this passage put forward some proposals and measures about some aspects, such as strengthen examination and verification and monitoring practical situation, making clear ventilation plan, in according to mining sequence strictly, training Ventilation technician forcefully, enhance Ventilation System management, development of Ventilation Radon Reduction technology research in uranium mines and carrying out ventilation equipments as soon as possible in further and so on. (authors)

International Training Centre, WNU — School of Uranium Production (Three Years Experience)

Energy Technology Data Exchange (ETDEWEB)

Trojáček, J., E-mail: trojacek@diamo.cz [WNU-SUP. DIAMO, Straz pod Ralskem (Czech Republic)

2014-05-15

Following a joint meeting of the IAEA, OECD/NEA Uranium Group and the World Nuclear Association, in 2004 the shortage of skilled professional staff to support the expansion of the global uranium industry was a major topic of discussion. As a consequence of the concerns expressed at that meeting, in 2006 the World Nuclear University-School of Uranium Production was set up with the cooperation of the DIAMO State Enterprise at their site in the Czech Republic. The facility is now up and running and provides a range of technical training activities to help strengthen the skills base amongst all uranium producing countries, both current and future. The paper describes the history of the school so far and the range of activities on offer. (author)

Procedure of uranium mine and mill facilities decommissioning work

International Nuclear Information System (INIS)

Li Renjie

1995-01-01

The procedure of decommissioning work of uranium mine and mill facilities includes three stages: preparation, on-the-spot construction and acceptance after being completed. The first stage, preparation, is discussed in detail, and it is presented to take the measures of strengthening leadership and improving leading body to conduct the decommissioning work best

Development of a code for the isotopic analysis of Uranium

Energy Technology Data Exchange (ETDEWEB)

Kim, J. H.; Kang, M. Y.; Kim, Jinhyeong; Choi, H. D. [Seoul National Univ., Seoul (Korea, Republic of)

2013-05-15

To strengthen the national nuclear nonproliferation regime by an establishment of nuclear forensic system, the techniques for nuclear material analysis and the categorization of important domestic nuclear materials are being developed. MGAU and FRAM are commercial software for the isotopic analysis of Uranium by using γ-spectroscopy, but the diversity of detection geometry and some effects - self attenuation, coincidence summing, etc. - suggest an analysis tool under continual improvement and modification. Hence, developing another code for HPGe γ- and x-ray spectrum analysis is started in this study. The analysis of the 87-101 keV region of Uranium spectrum is attempted based on the isotopic responses similar to those developed in MGAU. The code for isotopic analysis of Uranium is started from a fitting.

Strengthening primary health care through primary care and public health collaboration: the influence of intrapersonal and interpersonal factors.

Science.gov (United States)

Valaitis, Ruta K; O'Mara, Linda; Wong, Sabrina T; MacDonald, Marjorie; Murray, Nancy; Martin-Misener, Ruth; Meagher-Stewart, Donna

2018-04-12

AimThe aim of this paper is to examine Canadian key informants' perceptions of intrapersonal (within an individual) and interpersonal (among individuals) factors that influence successful primary care and public health collaboration. Primary health care systems can be strengthened by building stronger collaborations between primary care and public health. Although there is literature that explores interpersonal factors that can influence successful inter-organizational collaborations, a few of them have specifically explored primary care and public health collaboration. Furthermore, no papers were found that considered factors at the intrapersonal level. This paper aims to explore these gaps in a Canadian context. This interpretative descriptive study involved key informants (service providers, managers, directors, and policy makers) who participated in one h telephone interviews to explore their perceptions of influences on successful primary care and public health collaboration. Transcripts were analyzed using NVivo 9.FindingsA total of 74 participants [from the provinces of British Columbia (n=20); Ontario (n=19); Nova Scotia (n=21), and representatives from other provinces or national organizations (n=14)] participated. Five interpersonal factors were found that influenced public health and primary care collaborations including: (1) trusting and inclusive relationships; (2) shared values, beliefs and attitudes; (3) role clarity; (4) effective communication; and (5) decision processes. There were two influencing factors found at the intrapersonal level: (1) personal qualities, skills and knowledge; and (2) personal values, beliefs, and attitudes. A few differences were found across the three core provinces involved. There were several complex interactions identified among all inter and intra personal influencing factors: One key factor - effective communication - interacted with all of them. Results support and extend our understanding of what influences

To meet new tasks of scientific research on uranium geology in new century

International Nuclear Information System (INIS)

Chen Zuyi

2000-01-01

The author analyses the new situation that the scientific research on uranium geology is facing in the coming new century, and proposes that the guiding idea of the scientific research on uranium geology is to coordinate the general policy of Bureau of Geology--to give the first priority to in-situ leachable sandstone-type uranium deposits. The specific tasks for the scientific research on uranium geology are: to implement regional evaluation and target area selection of in-situ leachable sandstone-type uranium deposits; to develop new techniques and methods of detecting buried in-situ leachable sandstone-type uranium deposits; to turn the genetic model of uranium deposit and deposit model to prospecting model; to strengthen the research on economic geology and the dynamic assessment system of uranium resources and to build up and improve the data base of Meso-Cenozoic basins and sandstone-type uranium deposits. In order to guarantee the successful implementation of the above tasks it is necessary for the Beijing Research Institute of Uranium Geology--the leading unit in scientific research on uranium geology to accelerate bringing up large numbers of young outstanding researchers; to have clear consciousness of market economy and product quality; to given play to advantages of qualified personnel, advanced equipment and modern technology

Continued care of uranium mill sites: some economic considerations

International Nuclear Information System (INIS)

Harrington, W.; Sawyer, J.W. Jr.

1978-01-01

A critique of recently enacted legislation authorizing the New Mexico Environmental Improvement Agency to regulate uranium mills in the state is presented. Under this new legislation, the Agency is authorized to require payment of up to 10 cents per pound of yellowcake from each licensed mill in the state until a total of $1 million has been deposited by that mill. The continued care fund thus created will provide for maintenance in perpetuity of mill sites after being decommissioned. Arguments are presented, based on calculations for a typical 5,000 ton per day mill, that even the maximum amount is not likely to generate sufficient income to support an adequate maintenance program. The matter is further aggravated by the rate of inflation which will increase costs beyond the coverage provided by a fixed funding system. To correct this situation, it is proposed that (1) the fund should generate an income stream sufficient to meet all maintenance costs based on currently available information on costs, interest, and inflation rates, and (2) the terms of the continued care contribution should be readily alterable as new information becomes available. The latter condition should be coupled with removal of the upper statutory limit now established for the fund

Strengthening the delivery of asthma and chronic obstructive pulmonary disease care at primary health-care facilities: study design of a cluster randomized controlled trial in Pakistan

Directory of Open Access Journals (Sweden)

Muhammad Amir Khan

2015-11-01

Full Text Available Background: Respiratory diseases, namely asthma and chronic obstructive pulmonary disease (COPD, account for one-fourth of the patients at the primary health-care (PHC facilities in Pakistan. Standard care practices to manage these diseases are necessary to reduce the morbidity and mortality rate associated with non-communicable diseases in developing countries. Objective: To develop and measure the effectiveness of operational guidelines and implementation materials, with sound scientific evidence, for expanding lung health care, especially asthma and COPD through PHC facilities already strengthened for tuberculosis (TB care in Pakistan. Design: A cluster randomized controlled trial with two arms (intervention and control, with qualitative and costing study components, is being conducted in 34 clusters; 17 clusters per arm (428 asthma and 306 COPD patients, in three districts in Pakistan from October 2014 to December 2016. The intervention consists of enhanced case management of asthma and COPD patients through strengthening of PHC facilities. The main outcomes to be measured are asthma and COPD control among the registered cases at 6 months. Cluster- and individual-level analyses will be done according to intention to treat. Residual confounding will be addressed by multivariable logistic and linear regression models for asthma and COPD control, respectively. The trial is registered with ISRCTN registry (ISRCTN 17409338. Conclusions: Currently, only about 20% of the estimated prevalent asthma and COPD cases are being identified and reported through the respective PHC network. Lung health care and prevention has not been effectively integrated into the core PHC package, although a very well-functioning TB program exists at the PHC level. Inclusion of these diseases in the already existent TB program is expected to increase detection rates and care for asthma and COPD.

The role of public consultation in leading practice uranium mining

International Nuclear Information System (INIS)

Vance, R.

2014-01-01

facilities are performing as designed, the collection of baseline environmental data to objectively assess ecosystem impacts through the life of the mine by environmental monitoring programmes is essential to provide assurance of performance. Public consultation opportunities in presenting the results of the environmental monitoring programmes have proven critical to maintaining trust that the operations are performing as planned. Communication with neighbouring communities in decisions that affect them is critical to maintaining a social license to mine. An ongoing dialogue among the main stakeholders: the community, the mining company and the government has proven critical in this regard. With careful execution and participation of the main stakeholders, and adequate funding set aside for site remediation by mining companies, public funding for uranium mine site legacies and remediation should no longer be required and the goal of ensuring that no additional legacy uranium mining and milling issues are created will be assured. Included in this presentation are examples of public consultation in uranium mine operations that illustrate some of the challenges faced when undertaking public consultation and how such programmes can effectively increase public confidence and support of uranium mining, strengthening the social license to conduct the mining activity. (author)

Analysis of radon reduction and ventilation systems in uranium mines in China.

Science.gov (United States)

Hu, Peng-hua; Li, Xian-jie

2012-09-01

Mine ventilation is the most important way of reducing radon in uranium mines. At present, the radon and radon progeny levels in Chinese uranium mines where the cut and fill stoping method is used are 3-5 times higher than those in foreign uranium mines, as there is not much difference in the investments for ventilation protection between Chinese uranium mines and international advanced uranium mines with compaction methodology. In this paper, through the analysis of radon reduction and ventilation systems in Chinese uranium mines and the comparison of advantages and disadvantages between a variety of ventilation systems in terms of radon control, the authors try to illustrate the reasons for the higher radon and radon progeny levels in Chinese uranium mines and put forward some problems in three areas, namely the theory of radon control and ventilation systems, radon reduction ventilation measures and ventilation management. For these problems, this paper puts forward some proposals regarding some aspects, such as strengthening scrutiny, verifying and monitoring the practical situation, making clear ventilation plans, strictly following the mining sequence, promoting training of ventilation staff, enhancing ventilation system management, developing radon reduction ventilation technology, purchasing ventilation equipment as soon as possible in the future, and so on.

Analysis of radon reduction and ventilation systems in uranium mines in China

International Nuclear Information System (INIS)

Hu Penghua; Li Xianjie

2012-01-01

Mine ventilation is the most important way of reducing radon in uranium mines. At present, the radon and radon progeny levels in Chinese uranium mines where the cut and fill stoping method is used are 3–5 times higher than those in foreign uranium mines, as there is not much difference in the investments for ventilation protection between Chinese uranium mines and international advanced uranium mines with compaction methodology. In this paper, through the analysis of radon reduction and ventilation systems in Chinese uranium mines and the comparison of advantages and disadvantages between a variety of ventilation systems in terms of radon control, the authors try to illustrate the reasons for the higher radon and radon progeny levels in Chinese uranium mines and put forward some problems in three areas, namely the theory of radon control and ventilation systems, radon reduction ventilation measures and ventilation management. For these problems, this paper puts forward some proposals regarding some aspects, such as strengthening scrutiny, verifying and monitoring the practical situation, making clear ventilation plans, strictly following the mining sequence, promoting training of ventilation staff, enhancing ventilation system management, developing radon reduction ventilation technology, purchasing ventilation equipment as soon as possible in the future, and so on.

Strengthening fairness, transparency and accountability in health care priority setting at district level in Tanzania

Directory of Open Access Journals (Sweden)

Stephen Maluka

2011-11-01

Full Text Available Health care systems are faced with the challenge of resource scarcity and have insufficient resources to respond to all health problems and target groups simultaneously. Hence, priority setting is an inevitable aspect of every health system. However, priority setting is complex and difficult because the process is frequently influenced by political, institutional and managerial factors that are not considered by conventional priority-setting tools. In a five-year EU-supported project, which started in 2006, ways of strengthening fairness and accountability in priority setting in district health management were studied. This review is based on a PhD thesis that aimed to analyse health care organisation and management systems, and explore the potential and challenges of implementing Accountability for Reasonableness (A4R approach to priority setting in Tanzania. A qualitative case study in Mbarali district formed the basis of exploring the sociopolitical and institutional contexts within which health care decision making takes place. The study also explores how the A4R intervention was shaped, enabled and constrained by the contexts. Key informant interviews were conducted. Relevant documents were also gathered and group priority-setting processes in the district were observed. The study revealed that, despite the obvious national rhetoric on decentralisation, actual practice in the district involved little community participation. The assumption that devolution to local government promotes transparency, accountability and community participation, is far from reality. The study also found that while the A4R approach was perceived to be helpful in strengthening transparency, accountability and stakeholder engagement, integrating the innovation into the district health system was challenging. This study underscores the idea that greater involvement and accountability among local actors may increase the legitimacy and fairness of priority

Studies on the mechanism for in-place leaching of fragmented uranium ore by blasting

International Nuclear Information System (INIS)

Wu Hengshan; Wang Changhan

2001-01-01

The report is based on the locale test studies at No.745 Mine and Baifang Copper (Uranium) Mine. According to hydrokinetics of porous medium. The character of mining methods of in-place leaching of fragmented uranium are, the best application conditions, in-place leaching theory, the fittest composite of fragments of crashing uranium ore, the lowest velocity of flow in solution liquid, the reasonable parameter of stop structure, the technology of leaching, meaning, the equation of solution liquid, the name of solution mining and its classification are studied. Especially some creation in the theory of leaching in mud ore and the technology of strengthened leaching are given. It would be helpful to the design and production

Using Evidence to Strengthen Health Systems in Africa and the ...

International Development Research Centre (IDRC) Digital Library (Canada)

The project is timely for Lebanon, a country that is working to strengthen its primary health care system to respond to current priorities such as the emerging crisis of Syrian refugees. Timely access to information The project will strengthen institutional and individual abilities to conduct and use systematic and rapid reviews to ...

An analytic uranium sources model

International Nuclear Information System (INIS)

Singer, C.E.

2001-01-01

This document presents a method for estimating uranium resources as a continuous function of extraction costs and describing the uncertainty in the resulting fit. The estimated functions provide convenient extrapolations of currently available data on uranium extraction cost and can be used to predict the effect of resource depletion on future uranium supply costs. As such, they are a useful input for economic models of the nuclear energy sector. The method described here pays careful attention to minimizing built-in biases in the fitting procedure and defines ways to describe the uncertainty in the resulting fits in order to render the procedure and its results useful to the widest possible variety of potential users. (author)

HIV communication capacity strengthening: a critical review.

Science.gov (United States)

Lettenmaier, Cheryl; Kraft, Joan Marie; Raisanen, Keris; Serlemitsos, Elizabeth

2014-08-15

HIV communication is most effective and sustainable when it is designed and implemented locally and tailored to the local context. This requires capacity strengthening at national, subnational, and community levels. Through a review of the published and selected "grey" literature, we examine HIV communication capacity strengthening: definitions, measurements, implementation, and effects. We found limited documentation of HIV communication capacity needs or systematic approaches to address them. Most HIV communication capacity strengthening to date has focused on building individual competencies to design and manage social and behavior change communication programs through training courses, often coupled with networking opportunities for participants, post-training mentoring, and technical assistance. A few of these efforts have been evaluated through pre- and post-training tests and qualitative interviews with participants and have shown potential for improvement in individual skills and knowledge. Health communication capacity assessment tools that measure individual and organizational competencies exist, but they have most often been used to identify capacity building needs, not for evaluating capacity strengthening efforts. A new definition of capacity strengthening, grown out of recent efforts to improve effectiveness of international health and development programs, focuses on improving organizational and societal systems that support performance and individual competencies. We propose a holistic model for HIV communication capacity strengthening and call for rigorous documentation and evaluation to determine and scale-up optimal capacity building interventions for strengthening social and behavior change communication for HIV prevention, care, and treatment in developing countries.

The uranium production cycle and the environment. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

2002-04-01

Within the international community it is widely recognized that the responsibility for management of uranium production and all related activities should be independent of the organizations providing for the oversight and regulatory function. An important role of the IAEA is establishing international safety standards for protection of health and environment against exposure to ionizing radiation. Once legally binding laws, regulations and standards are established,either through national and international programmes, it becomes the responsibility of the management and operators of uranium production projects for carrying our all activities to meet these requirements. The major emphasis of the IAEA's Project on Raw Materials for Reactor Fuels is to improve and strengthen the practice of preventive measures by establishing guidelines for environmental impact assessment and mitigation and the recognition and promotion of good practice and modern technology. The Waste Technology programme provides advice on the cleanup and remediation of old production sites and wastes. One important mechanism for recognizing and promoting best practice in environmental management of uranium production is fostering information exchange among specialists. The IAEA exercises this mechanism, for examples though publications, electronic information exchange and, particularly, through large gatherings of specialists and decision makers at international conferences, symposia and seminars. The topics covered at the symposium were: Energy needs and challenges for the 21{sup st} Century; uranium supply for the short and long term; sustainable development, energy resources and nuclear energy's role in greenhouse gas abatement; economic impact of world mining; impacts of mining on developed and developing countries; environmental and social impacts of uranium mining in several countries; examples of positive and negative impacts of uranium mining projects on local communities; environmental

The uranium production cycle and the environment. Proceedings

International Nuclear Information System (INIS)

2002-01-01

Within the international community it is widely recognized that the responsibility for management of uranium production and all related activities should be independent of the organizations providing for the oversight and regulatory function. An important role of the IAEA is establishing international safety standards for protection of health and environment against exposure to ionizing radiation. Once legally binding laws, regulations and standards are established,either through national and international programmes, it becomes the responsibility of the management and operators of uranium production projects for carrying our all activities to meet these requirements. The major emphasis of the IAEA's Project on Raw Materials for Reactor Fuels is to improve and strengthen the practice of preventive measures by establishing guidelines for environmental impact assessment and mitigation and the recognition and promotion of good practice and modern technology. The Waste Technology programme provides advice on the cleanup and remediation of old production sites and wastes. One important mechanism for recognizing and promoting best practice in environmental management of uranium production is fostering information exchange among specialists. The IAEA exercises this mechanism, for examples though publications, electronic information exchange and, particularly, through large gatherings of specialists and decision makers at international conferences, symposia and seminars. The topics covered at the symposium were: Energy needs and challenges for the 21 st Century; uranium supply for the short and long term; sustainable development, energy resources and nuclear energy's role in greenhouse gas abatement; economic impact of world mining; impacts of mining on developed and developing countries; environmental and social impacts of uranium mining in several countries; examples of positive and negative impacts of uranium mining projects on local communities; environmental issues

New Prototype Safeguards Technology Offers Improved Confidence and Automation for Uranium Enrichment Facilities

Energy Technology Data Exchange (ETDEWEB)

Brim, Cornelia P.

2013-04-01

An important requirement for the international safeguards community is the ability to determine the enrichment level of uranium in gas centrifuge enrichment plants and nuclear fuel fabrication facilities. This is essential to ensure that countries with nuclear nonproliferation commitments, such as States Party to the Nuclear Nonproliferation Treaty, are adhering to their obligations. However, current technologies to verify the uranium enrichment level in gas centrifuge enrichment plants or nuclear fuel fabrication facilities are technically challenging and resource-intensive. NNSA’s Office of Nonproliferation and International Security (NIS) supports the development, testing, and evaluation of future systems that will strengthen and sustain U.S. safeguards and security capabilities—in this case, by automating the monitoring of uranium enrichment in the entire inventory of a fuel fabrication facility. One such system is HEVA—hybrid enrichment verification array. This prototype was developed to provide an automated, nondestructive assay verification technology for uranium hexafluoride (UF6) cylinders at enrichment plants.

Analysis of radon reduction by ventilation in uranium mines in China

International Nuclear Information System (INIS)

Hu Penghua; Li Xianjie

2011-01-01

Mine ventilation is the most important way to reduce radon in uranium mines. At present, the concentrations of radon and its daughters in underground air is 3-5 times higher than those in other countries, at the same protection conditions. In this paper, through the analysis of radon reduction status in Chinese uranium mines and the comparison of advantages and shortcomings between variety of ventilation and radon reduction measures, the reasons for higher radon and radon daughter concentration in Chinese uranium mines are discussed and some problems are put forward in three aspects: radon reduction ventilation theory, measures and management. Based on above problems, this paper puts forward some proposals and measures, such as strengthening examination and verification and monitoring practical situation, making clear ventilation plan, training ventilation technician, enhancing ventilation system management, developing radon reduction ventilation research and putting ventilation equipment in place as soon as possible in future. (authors)

Tailor-made finance versus tailor-made care. Can the state strengthen consumer choice in healthcare by reforming the financial structure of long-term care?

Science.gov (United States)

Grit, K; de Bont, A

2010-02-01

Policy instruments based on the working of markets have been introduced to empower consumers of healthcare. However, it is still not easy to become a critical consumer of healthcare. The aim of this study is to analyse the possibilities of the state to strengthen the position of patients with the aid of a new financial regime, such as personal health budgets. Data were collected through in-depth interviews with executives, managers, professionals and client representatives of six long-term care institutions. With the introduction of individual budgets the responsibility for budgetary control has shifted from the organisational level to the individual level in the caregiver-client relationship. Having more luxurious care on offer necessitates a stronger demarcation of regular care because organisations cannot simultaneously offer extra care as part of the standard care package. New financial instruments have an impact on the culture of receiving and giving care. Distributive justice takes on new meaning with the introduction of financial market mechanisms in healthcare; the distributing principle of 'need' is transformed into the principle of 'economic demand'. Financial instruments not only act as a countervailing power against providers insufficiently client-oriented, but are also used by providers to reinforce their own positions vis-à-vis demanding clients. Tailor-made finance is not the same as tailor-made care.

Strengthening the management of scientific and technological achievements and serving the work of uranium geology

International Nuclear Information System (INIS)

Tian Hua

2009-01-01

Through summarizing the experiences in the management of scientific and technological achievements uranium geology, combined with the scientific research and operation practices, the author tries to find some problems and puts forward suggestion for the management of scientific and technological achievements. (authors)

The last twenty years of the IAEA technical cooperation on the uranium production cycle in Argentina

International Nuclear Information System (INIS)

Lopez, L.

2014-01-01

Since 1993, the National Atomic Energy Commission (Argentina) has been involved in several IAEA Technical Cooperation Projects at interregional, regional and national levels, covering different aspects of the uranium production cycle. The TC referred projects can be listed as follows: - INT 2/015 “Supporting Uranium Exploration Resource Augmentation and Production Using Advanced Techniques” (2012 – Present). - RLA 3/006 - 010 “Upgrading of Uranium Exploration, Exploitation and Yellowcake Production Techniques taking Environmental Problems into Account” (2007 - Present). - ARG 2/014 “Development and Strengthening of the Uranium Mining Cycle Human Resources” (2012 – Present). - ARG 3/012 - 014 "Geology favourability, production feasibility and environmental impact assessment of uranium deposits exploitable by the in situ leaching technology (ISL)'' (2007 - Present). - ARG 3/009 “Development and use of biological techniques for uranium production (ARG 3/009)” (2003 - 2006). - ARG 3/008 “Prospection of uranium and other elements using gamma-ray spectrometry surveys” (2001 – 2005). - ARG 3/007 “Uranium Favorability and Exploration in Argentina” (1993 - 1997). It can be considered that the role of the technological transfer by the IAEA has been highly relevant for increasing the capability of strategically plan and more efficiently carry out the uranium production cycle projects in Argentina. (author)

Prospecting ideas for mesozoic granite-type, volcanics-type and exo-contact-type uranium deposits in South China. Pt.1

International Nuclear Information System (INIS)

Yu Dagan

2001-01-01

The Mesozoic uranium ore-formation process in South China resulted from the intense volcanic magmatism, the crust-mantle interaction and the fluidization in Yanshanian period, and there is great prospect for large-scale uranium concentration and ore-formation. Therefore, during the prospecting for Mesozoic granite-type, volcanics-type and exo-contact-type uranium deposits it is necessary to introduce deep-source metallogenic theory, to 'desalt' metallogenic theory of epithermal activation, to fully realize that uranium deposits may be formed not only at shallow depth, but also in conditions of deep-source, great depth and high temperature, as well as in environments of deep-source, shallow depth and median temperature, to give emphasis to the early-stage (130-95 Ma) uranium mineralization, to break the man-made boundary in prospecting for uranium only based on host rock type, to strengthen the research on Cretaceous magmatic system

UMTRA -- The US Uranium Mill Tailings Remedial Action Project

International Nuclear Information System (INIS)

Lightner, R.; Cormier, C.; Bierley, D.

1995-01-01

In the late 1970s, the United States (US) established the first comprehensive regulatory structure for the management, disposal, and long-term care of wastes produced from its domestic uranium processing industry. This regulatory framework was established through the passage of the Uranium Mill Tailings Radiation Control Act of 1978, often referred to as UMTRCA. This legislation created the Uranium Mill Tailings Remedial Action (UMTRA) Project and assigned the US Department of Energy (DOE) the lead in conducting the required remedial action at 24 designated inactive uranium ore processing sites. With the majority of these 22 sites complete, the DOE's UMTRA Project has established a distinguished reputation for safely and effectively remediating these low-level waste sites in a complex regulatory and socioeconomic environment. This paper describes the past accomplishments and current status of the UMTRA Project and discusses the DOE's plans for addressing ground water contamination associated with these sites and its commitment to continuing the long-term care and management of these disposal cells

An analysis of Liberia's 2007 national health policy: lessons for health systems strengthening and chronic disease care in poor, post-conflict countries

Directory of Open Access Journals (Sweden)

Chan Brian T

2011-10-01

Full Text Available Abstract Background Globally, chronic diseases are responsible for an enormous burden of deaths, disability, and economic loss, yet little is known about the optimal health sector response to chronic diseases in poor, post-conflict countries. Liberia's experience in strengthening health systems and health financing overall, and addressing HIV/AIDS and mental health in particular, provides a relevant case study for international stakeholders and policymakers in other poor, post-conflict countries seeking to understand and prioritize the global response to chronic diseases. Methods We conducted a historical review of Liberia's post-conflict policies and their impact on general economic and health indicators, as well as on health systems strengthening and chronic disease care and treatment. Key sources included primary documents from Liberia's Ministry of Health and Social Welfare, published and gray literature, and personal communications from key stakeholders engaged in Liberia's Health Sector Reform. In this case study, we examine the early reconstruction of Liberia's health care system from the end of conflict in 2003 to the present time, highlight challenges and lessons learned from this initial experience, and describe future directions for health systems strengthening and chronic disease care and treatment in Liberia. Results Six key lessons emerge from this analysis: (i the 2007 National Health Policy's 'one size fits all' approach met aggregate planning targets but resulted in significant gaps and inefficiencies throughout the system; (ii the innovative Health Sector Pool Fund proved to be an effective financing mechanism to recruit and align health actors with the 2007 National Health Policy; (iii a substantial rural health delivery gap remains, but it could be bridged with a robust cadre of community health workers integrated into the primary health care system; (iv effective strategies for HIV/AIDS care in other settings should be

Evaluation of a policy to strengthen case management and quality of diabetes care in general practice in Denmark

DEFF Research Database (Denmark)

Rudkjøbing, Andreas; Vrangbaek, Karsten; Birk, Hans Okkels

2015-01-01

OBJECTIVES: To evaluate the utilization of a policy for strengthening general practitioner's case management and quality of care of diabetes patients in Denmark incentivized by a novel payment mode. We also want to elucidate any geographical variation or variation on the basis of practice features...... of the GP were are able to determine differences in use of the policy in relation to the practice-specific information. RESULTS: At the end of the study period (2007-2012) approximately 30% of practices have enrolled extending services to approximately 10% of the diabetes population. There is regional...... structure defined in the policy not strong enough to move the majority of GPs to change their way of delivering and financing care for patients with diabetes within a period of more than 5 years....

Uranium

International Nuclear Information System (INIS)

Hamdoun, N.A.

2007-01-01

The article includes a historical preface about uranium, discovery of portability of sequential fission of uranium, uranium existence, basic raw materials, secondary raw materials, uranium's physical and chemical properties, uranium extraction, nuclear fuel cycle, logistics and estimation of the amount of uranium reserves, producing countries of concentrated uranium oxides and percentage of the world's total production, civilian and military uses of uranium. The use of depleted uranium in the Gulf War, the Balkans and Iraq has caused political and environmental effects which are complex, raising problems and questions about the effects that nuclear compounds left on human health and environment.

Uranium extraction from gold-uranium ores

Energy Technology Data Exchange (ETDEWEB)

Laskorin, B.N.; Golynko, Z.Sh.

1981-01-01

The process of uranium extraction from gold-uranium ores in the South Africa is considered. Flowsheets of reprocessing gold-uranium conglomerates, pile processing and uranium extraction from the ores are presented. Continuous counter flow ion-exchange process of uranium extraction using strong-active or weak-active resins is noted to be the most perspective and economical one. The ion-exchange uranium separation with the succeeding extraction is also the perspective one.

Method for converting uranium oxides to uranium metal

International Nuclear Information System (INIS)

Duerksen, W.K.

1988-01-01

A method for converting uranium oxide to uranium metal is described comprising the steps of heating uranium oxide in the presence of a reducing agent to a temperature sufficient to reduce the uranium oxide to uranium metal and form a heterogeneous mixture of a uranium metal product and oxide by-products, heating the mixture in a hydrogen atmosphere at a temperature sufficient to convert uranium metal in the mixture to uranium hydride, cooling the resulting uranium hydride-containing mixture to a temperature sufficient to produce a ferromagnetic transition in the uranium hydride, magnetically separating the cooled uranium hydride from the mixture, and thereafter heating the separated uranium hydride in an inert atmosphere to a temperature sufficient to convert the uranium hydride to uranium metal

Inventory control through gamma spectrometry at the enriched uranium laboratory

International Nuclear Information System (INIS)

Vicens, H.E.; Korob, R.O.; Goldschmidt, A.E.

1987-01-01

The enriched uranium laboratory processes alternatively uranium 90% and 20% enriched in U-235. The control of the isotopic composition of lots is made through mass spectrometry. In the laboratory operation wastes of both enrichments are generated and the recovery is performed with a time delay. To strengthen the administrative controls, avoid errors related to personnel replacement and/or deferred operations, it seemed suitable to adjust the gamma spectrometry as a fast, simple and available method to determine the enrichment. The laboratory work includes a wet and a dry process. The waste recovery necessarily involves the handling of liquid samples. For this reason, it was decided to determine the calibration curve for uranyl nitrate samples of fixed concentration and geometry. The samples were prepared from material purified through double precipitation of uranium peroxide and subsequent ignition to U 3 O 8 in platinum crucible, in tubular oven during 8 hours at 720 deg C. The preparation of samples, the measurement description, the discussion of results and the analysis of errors due to the presence of insoluble material and concentration changes are included. (Author)

Working Together for Children: Strengthening Transition Pathways

Science.gov (United States)

Collie, Louise; Willis, Felicity; Paine, Crystal; Windsor, Corina

2007-01-01

The "Working Together for Children: Strengthening Transition Pathways" Team has identified that there is a gap between the Early Childhood settings and schools within the Dubbo area. Through meetings with early childhood professionals within Dubbo the authors have identified that the current landscape of care and education within their community…

Method for converting uranium oxides to uranium metal

Science.gov (United States)

Duerksen, Walter K.

1988-01-01

A process is described for converting scrap and waste uranium oxide to uranium metal. The uranium oxide is sequentially reduced with a suitable reducing agent to a mixture of uranium metal and oxide products. The uranium metal is then converted to uranium hydride and the uranium hydride-containing mixture is then cooled to a temperature less than -100.degree. C. in an inert liquid which renders the uranium hydride ferromagnetic. The uranium hydride is then magnetically separated from the cooled mixture. The separated uranium hydride is readily converted to uranium metal by heating in an inert atmosphere. This process is environmentally acceptable and eliminates the use of hydrogen fluoride as well as the explosive conditions encountered in the previously employed bomb-reduction processes utilized for converting uranium oxides to uranium metal.

Uranium

International Nuclear Information System (INIS)

Cuney, M.; Pagel, M.; Leroy, J.

1992-01-01

First, this book presents the physico-chemical properties of Uranium and the consequences which can be deduced from the study of numerous geological process. The authors describe natural distribution of Uranium at different scales and on different supports, and main Uranium minerals. A great place in the book is assigned to description and classification of uranium deposits. The book gives also notions on prospection and exploitation of uranium deposits. Historical aspects of Uranium economical development (Uranium resources, production, supply and demand, operating costs) are given in the last chapter. 7 refs., 17 figs

Uranium

International Nuclear Information System (INIS)

Poty, B.; Cuney, M.; Bruneton, P.; Virlogeux, D.; Capus, G.

2010-01-01

With the worldwide revival of nuclear energy comes the question of uranium reserves. For more than 20 years, nuclear energy has been neglected and uranium prospecting has been practically abandoned. Therefore, present day production covers only 70% of needs and stocks are decreasing. Production is to double by 2030 which represents a huge industrial challenge. The FBR-type reactors technology, which allows to consume the whole uranium content of the fuel, is developing in several countries and will ensure the long-term development of nuclear fission. However, the implementation of these reactors (the generation 4) will be progressive during the second half of the 21. century. For this reason an active search for uranium ores will be necessary during the whole 21. century to ensure the fueling of light water reactors which are huge uranium consumers. This dossier covers all the aspects of natural uranium production: mineralogy, geochemistry, types of deposits, world distribution of deposits with a particular attention given to French deposits, the exploitation of which is abandoned today. Finally, exploitation, ore processing and the economical aspects are presented. Contents: 1 - the uranium element and its minerals: from uranium discovery to its industrial utilization, the main uranium minerals (minerals with tetravalent uranium, minerals with hexavalent uranium); 2 - uranium in the Earth's crust and its geochemical properties: distribution (in sedimentary rocks, in magmatic rocks, in metamorphic rocks, in soils and vegetation), geochemistry (uranium solubility and valence in magmas, uranium speciation in aqueous solution, solubility of the main uranium minerals in aqueous solution, uranium mobilization and precipitation); 3 - geology of the main types of uranium deposits: economical criteria for a deposit, structural diversity of deposits, classification, world distribution of deposits, distribution of deposits with time, superficial deposits, uranium

A study on the oxidation behavior of uranium

International Nuclear Information System (INIS)

Kim, Tae Kook; Kang, Kweon Ho; Kim, Kil Jeang; Kang, Il Sik; Jung, Kyung Whan

1998-03-01

When storing depleted uranium wastes, careful handling is required due to their very high oxidation rates. To determine the oxidation mechanism and oxidation rate of depleted uranium wastes, the most important factors to be considered in their treatment, an experiment was carried out by varying the heating rates of the Air-Controlled Oxidizer. The experiment, showed that depleted uranium wastes are pulverized after complete oxidation because of the density difference and then converted to UO 2 , U 3 O 7 , U 3 O 8 . The grain size of pulverized powder decrease with increased temperature. (author). 30 refs., 5 tabs., 28 figs

Biokinetic models for the metabolism of uranium: an overview

International Nuclear Information System (INIS)

Bertelli, Luiz; Lipsztein, Joyce L.; Melo, Dunstana R.; Puerta, Anselmo; Wrenn, McDonald E.

1997-01-01

This work reviews the main experiments involving uranium injection and inhalation into several animal species and those associated with humans as well. The literature was carefully selected to involve the uranium intake, distribution and excretion in humans and mammals. The available biokinetic models for the uranium metabolism, proposed by ICRP in Publications 2, 30 and 69, were shortly described and tested against the data. Human data which incorporates measurements of urine, autopsy and biopsy samples were also used completing the review of models associated with the systemic part. (author). 21 refs., 4 figs

Separation Techniques for Uranium and Plutonium at Trace Levels for the Thermal Ionization Mass Spectrometric Determination

International Nuclear Information System (INIS)

Suh, M. Y.; Han, S. H.; Kim, J. G.; Park, Y. J.; Kim, W. H.

2005-12-01

This report describes the state of the art and the progress of the chemical separation and purification techniques required for the thermal ionization mass spectrometric determination of uranium and plutonium in environmental samples at trace or ultratrace levels. Various techniques, such as precipitation, solvent extraction, extraction chromatography, and ion exchange chromatography, for separation of uranium and plutonium were evaluated. Sample preparation methods and dissolution techniques for environmental samples were also discussed. Especially, both extraction chromatographic and anion exchange chromatographic procedures for uranium and plutonium in environmental samples, such as soil, sediment, plant, seawater, urine, and bone ash were reviewed in detail in order to propose some suitable methods for the separation and purification of uranium and plutonium from the safeguards environmental or swipe samples. A survey of the IAEA strengthened safeguards system, the clean room facility of IAEA's NWAL(Network of Analytical Laboratories), and the analytical techniques for safeguards environmental samples was also discussed here

Separation Techniques for Uranium and Plutonium at Trace Levels for the Thermal Ionization Mass Spectrometric Determination

Energy Technology Data Exchange (ETDEWEB)

Suh, M. Y.; Han, S. H.; Kim, J. G.; Park, Y. J.; Kim, W. H

2005-12-15

This report describes the state of the art and the progress of the chemical separation and purification techniques required for the thermal ionization mass spectrometric determination of uranium and plutonium in environmental samples at trace or ultratrace levels. Various techniques, such as precipitation, solvent extraction, extraction chromatography, and ion exchange chromatography, for separation of uranium and plutonium were evaluated. Sample preparation methods and dissolution techniques for environmental samples were also discussed. Especially, both extraction chromatographic and anion exchange chromatographic procedures for uranium and plutonium in environmental samples, such as soil, sediment, plant, seawater, urine, and bone ash were reviewed in detail in order to propose some suitable methods for the separation and purification of uranium and plutonium from the safeguards environmental or swipe samples. A survey of the IAEA strengthened safeguards system, the clean room facility of IAEA's NWAL(Network of Analytical Laboratories), and the analytical techniques for safeguards environmental samples was also discussed here.

Uranium conversion

International Nuclear Information System (INIS)

Oliver, Lena; Peterson, Jenny; Wilhelmsen, Katarina

2006-03-01

FOI, has performed a study on uranium conversion processes that are of importance in the production of different uranium compounds in the nuclear industry. The same conversion processes are of interest both when production of nuclear fuel and production of fissile material for nuclear weapons are considered. Countries that have nuclear weapons ambitions, with the intention to produce highly enriched uranium for weapons purposes, need some degree of uranium conversion capability depending on the uranium feed material available. This report describes the processes that are needed from uranium mining and milling to the different conversion processes for converting uranium ore concentrate to uranium hexafluoride. Uranium hexafluoride is the uranium compound used in most enrichment facilities. The processes needed to produce uranium dioxide for use in nuclear fuel and the processes needed to convert different uranium compounds to uranium metal - the form of uranium that is used in a nuclear weapon - are also presented. The production of uranium ore concentrate from uranium ore is included since uranium ore concentrate is the feed material required for a uranium conversion facility. Both the chemistry and principles or the different uranium conversion processes and the equipment needed in the processes are described. Since most of the equipment that is used in a uranium conversion facility is similar to that used in conventional chemical industry, it is difficult to determine if certain equipment is considered for uranium conversion or not. However, the chemical conversion processes where UF 6 and UF 4 are present require equipment that is made of corrosion resistant material

International uranium production. Namibian perspective

International Nuclear Information System (INIS)

Daniel, P.

1984-01-01

The Rossing uranium deposit is the only one currently being mined in Namibia. Construction began in 1974 and production started in 1979. Current production is close to 4800 s.t. U3O8 per annum. About 160 000 mt of ore and waste are removed from the open pit every day. Each truck load is radiometrically scanned to determine ore grade and is discharged either directly into the primary crusher or into low-grade stockpiles. The uranium is extracted in a sulphuric acid leaching plant and upgraded in an ion exchange and solvent extraction plant. An ion exchange plant recovers uranium from the tailings solution. Three thousand people are employed at the mine, most living in the nearby town site. Employee training and development are emphasized. Employee health is carefully monitored; no occupationally-related disease has been reported. Rossing contributes one third of the GNP of Namibia. (L.L.)

Machining of uranium and uranium alloys

International Nuclear Information System (INIS)

Morris, T.O.

1981-01-01

Uranium and uranium alloys can be readily machined by conventional methods in the standard machine shop when proper safety and operating techniques are used. Material properties that affect machining processes and recommended machining parameters are discussed. Safety procedures and precautions necessary in machining uranium and uranium alloys are also covered. 30 figures

Synergetic treatment of uranium-bearing waste water with sulfate reducing bacteria and zero-valent iron

International Nuclear Information System (INIS)

Zhou Quanyu; Tan Kaixuan; Zeng Sheng; Liu Dong

2009-01-01

The treatment of uranium-bearing wastewater from uranium mine and using microorganism to treat wastewater were paid much attention to environmental researchers. Based on column experiments, we investigated the potential using sulfate reducing bacteria (SRB) and zero-valent iron (ZVI) to synergetic treat contamination in wastewater such as sulfate, uranium, etc. SRB+ZVI can effectively remove contamination U(VI) and SO 4 2- in wastewater. The removal rate is 99.4% and 86.2% for U(VI) and SO 4 2- , respectively. The pH of wastewater can be basified to neutral. U(VI) and SO 4 2- as electron acceptor of sulfate reducing bacteria are removed by biological reduction. The corrosion of ZVI is benefit to enhance the pH of wastewater, forms anaerobic reducing environment, strengthens survival and metabolism reaction of SRB, and plays a synergetic enhancement. (authors)

Uranium recovery from slags of metallic uranium

International Nuclear Information System (INIS)

Fornarolo, F.; Frajndlich, E.U.C.; Durazzo, M.

2006-01-01

The Center of the Nuclear Fuel of the Institute of Nuclear Energy Research - IPEN finished the program of attainment of fuel development for research reactors the base of Uranium Scilicet (U 3 Si 2 ) from Hexafluoride of Uranium (UF 6 ) with enrichment 20% in weight of 235 U. In the process of attainment of the league of U 3 Si 2 we have as Uranium intermediate product the metallic one whose attainment generates a slag contend Uranium. The present work shows the results gotten in the process of recovery of Uranium in slags of calcined slags of Uranium metallic. Uranium the metallic one is unstable, pyrophoricity and extremely reactive, whereas the U 3 O 8 is a steady oxide of low chemical reactivity, what it justifies the process of calcination of slags of Uranium metallic. The calcination of the Uranium slag of the metallic one in oxygen presence reduces Uranium metallic the U 3 O 8 . Experiments had been developed varying it of acid for Uranium control and excess, nitric molar concentration gram with regard to the stoichiometric leaching reaction of temperature of the leaching process. The 96,0% income proves the viability of the recovery process of slags of Uranium metallic, adopting it previous calcination of these slags in nitric way with low acid concentration and low temperature of leaching. (author)

Conditions and potential evaluation of the uranium mineralization in volcanic basins at the west section of the Yanliao mineral belt

International Nuclear Information System (INIS)

Wang Zhengbang; Zhao Shiqin; Luo Yi; Zhou Dean; Xiao Xiangping

1993-03-01

The West section of the Yanliao Mineral Belt is an important prospective uranium mineralization area in volcanic basins at North China. It has undergone three evolutionary periods and developed into six large volcanic collapse faulted basins with tri-layer structure. This leads to three times of pre-enrichment and multiple mineralization of uranium. Finally, the accumulation of uranium and superimposed reworked actions of uranium mineralization resulted in the formation of uranium deposits. After analyzing conditions of uranium mineralization, a model for uranium mineralization of mixed hydrothermal solution of multiple sources in penetrating volcanic collapse faulted basins and seven exploring criteria are suggested. On this basis the evaluation of prospect in this area is positive, and the main exploring strategy has been decided. Furthermore, five prospective areas of mineralization and three most favorable mineralization zones are selected. For exploring large size or super-large size uranium deposits in the area, the key is to strengthen the study and boring of deep layers. Thus, the mineralization in the deep layers or basement may be found. The prediction of deep blind deposits in known ore districts has been proved effectively

Uranium, depleted uranium, biological effects; Uranium, uranium appauvri, effets biologiques

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

Physicists, chemists and biologists at the CEA are developing scientific programs on the properties and uses of ionizing radiation. Since the CEA was created in 1945, a great deal of research has been carried out on the properties of natural, enriched and depleted uranium in cooperation with university laboratories and CNRS. There is a great deal of available data about uranium; thousands of analyses have been published in international reviews over more than 40 years. This presentation on uranium is a very brief summary of all these studies. (author)

Development of a Unifying Target and Consensus Indicators for Global Surgical Systems Strengthening: Proposed by the Global Alliance for Surgery, Obstetric, Trauma, and Anaesthesia Care (The G4 Alliance).

Science.gov (United States)

Haider, Adil; Scott, John W; Gause, Colin D; Meheš, Mira; Hsiung, Grace; Prelvukaj, Albulena; Yanocha, Dana; Baumann, Lauren M; Ahmed, Faheem; Ahmed, Na'eem; Anderson, Sara; Angate, Herve; Arfaa, Lisa; Asbun, Horacio; Ashengo, Tigistu; Asuman, Kisembo; Ayala, Ruben; Bickler, Stephen; Billingsley, Saul; Bird, Peter; Botman, Matthijs; Butler, Marilyn; Buyske, Jo; Capozzi, Angelo; Casey, Kathleen; Clayton, Charles; Cobey, James; Cotton, Michael; Deckelbaum, Dan; Derbew, Miliard; deVries, Catherine; Dillner, Jeanne; Downham, Max; Draisin, Natalie; Echinard, David; Elneil, Sohier; ElSayed, Ahmed; Estelle, Abigail; Finley, Allen; Frenkel, Erica; Frykman, Philip K; Gheorghe, Florin; Gore-Booth, Julian; Henker, Richard; Henry, Jaymie; Henry, Orion; Hoemeke, Laura; Hoffman, David; Ibanga, Iko; Jackson, Eric V; Jani, Pankaj; Johnson, Walter; Jones, Andrew; Kassem, Zeina; Kisembo, Asuman; Kocan, Abbey; Krishnaswami, Sanjay; Lane, Robert; Latif, Asad; Levy, Barbara; Linos, Dimitrios; Linz, Peter; Listwa, Louis A; Magee, Declan; Makasa, Emmanuel; Marin, Michael L; Martin, Claude; McQueen, Kelly; Morgan, Jamie; Moser, Richard; Neighbor, Robert; Novick, William M; Ogendo, Stephen; Omigbodun, Akinyinka; Onajin-Obembe, Bisola; Parsan, Neil; Philip, Beverly K; Price, Raymond; Rasheed, Shahnawaz; Ratel, Marjorie; Reynolds, Cheri; Roser, Steven M; Rowles, Jackie; Samad, Lubna; Sampson, John; Sanghvi, Harshadkumar; Sellers, Marchelle L; Sigalet, David; Steffes, Bruce C; Stieber, Erin; Swaroop, Mamta; Tarpley, John; Varghese, Asha; Varughese, Julie; Wagner, Richard; Warf, Benjamin; Wetzig, Neil; Williamson, Susan; Wood, Joshua; Zeidan, Anne; Zirkle, Lewis; Allen, Brendan; Abdullah, Fizan

2017-10-01

After decades on the margins of primary health care, surgical and anaesthesia care is gaining increasing priority within the global development arena. The 2015 publications of the Disease Control Priorities third edition on Essential Surgery and the Lancet Commission on Global Surgery created a compelling evidenced-based argument for the fundamental role of surgery and anaesthesia within cost-effective health systems strengthening global strategy. The launch of the Global Alliance for Surgical, Obstetric, Trauma, and Anaesthesia Care in 2015 has further coordinated efforts to build priority for surgical care and anaesthesia. These combined efforts culminated in the approval of a World Health Assembly resolution recognizing the role of surgical care and anaesthesia as part of universal health coverage. Momentum gained from these milestones highlights the need to identify consensus goals, targets and indicators to guide policy implementation and track progress at the national level. Through an open consultative process that incorporated input from stakeholders from around the globe, a global target calling for safe surgical and anaesthesia care for 80% of the world by 2030 was proposed. In order to achieve this target, we also propose 15 consensus indicators that build on existing surgical systems metrics and expand the ability to prioritize surgical systems strengthening around the world.

The cohesive energy of uranium dioxide and thorium dioxide

International Nuclear Information System (INIS)

Childs, B.G.

1958-08-01

Theoretical values have been calculated of the heats of formation of uranium dioxide and thorium dioxide on the assumption that the atomic binding forces in these solids are predominantly ionic in character. The good agreement found between the theoretical and observed values shows that the ionic model may, with care, be used in calculating the energies of defects in the uranium and thorium dioxide crystal structures. (author)

Possible uranium sources of Streltsovsky uranium ore field

International Nuclear Information System (INIS)

Zhang Lisheng

2005-01-01

The uranium deposit of the Late Jurassic Streltsovaky caldera in Transbaikalia of Russia is the largest uranium field associated with volcanics in the world, its uranium reserves are 280 000 t U, and it is the largest uranium resources in Russia. About one third of the caldera stratigraphic pile consists of strongly-altered rhyolites. Uranium resources of the Streltsovsky caldera are much larger than any other volcanic-related uranium districts in the world. Besides, the efficiency of hydrothermal alteration, uranium resources appear to result from the juxtaposition of two major uranium sources; highly fractionated peralkaline rhyolites of Jurassic age in the caldera, and U-rich subalkaline granites of Variscan age in the basement in which the major uranium-bearing accessory minerals were metamict at the time of the hydrothermal ore formation. (authors)

Process for continuous production of metallic uranium and uranium alloys

Science.gov (United States)

Hayden, Jr., Howard W.; Horton, James A.; Elliott, Guy R. B.

1995-01-01

A method is described for forming metallic uranium, or a uranium alloy, from uranium oxide in a manner which substantially eliminates the formation of uranium-containing wastes. A source of uranium dioxide is first provided, for example, by reducing uranium trioxide (UO.sub.3), or any other substantially stable uranium oxide, to form the uranium dioxide (UO.sub.2). This uranium dioxide is then chlorinated to form uranium tetrachloride (UCl.sub.4), and the uranium tetrachloride is then reduced to metallic uranium by reacting the uranium chloride with a metal which will form the chloride of the metal. This last step may be carried out in the presence of another metal capable of forming one or more alloys with metallic uranium to thereby lower the melting point of the reduced uranium product. The metal chloride formed during the uranium tetrachloride reduction step may then be reduced in an electrolysis cell to recover and recycle the metal back to the uranium tetrachloride reduction operation and the chlorine gas back to the uranium dioxide chlorination operation.

Process for continuous production of metallic uranium and uranium alloys

Science.gov (United States)

Hayden, H.W. Jr.; Horton, J.A.; Elliott, G.R.B.

1995-06-06

A method is described for forming metallic uranium, or a uranium alloy, from uranium oxide in a manner which substantially eliminates the formation of uranium-containing wastes. A source of uranium dioxide is first provided, for example, by reducing uranium trioxide (UO{sub 3}), or any other substantially stable uranium oxide, to form the uranium dioxide (UO{sub 2}). This uranium dioxide is then chlorinated to form uranium tetrachloride (UCl{sub 4}), and the uranium tetrachloride is then reduced to metallic uranium by reacting the uranium chloride with a metal which will form the chloride of the metal. This last step may be carried out in the presence of another metal capable of forming one or more alloys with metallic uranium to thereby lower the melting point of the reduced uranium product. The metal chloride formed during the uranium tetrachloride reduction step may then be reduced in an electrolysis cell to recover and recycle the metal back to the uranium tetrachloride reduction operation and the chlorine gas back to the uranium dioxide chlorination operation. 4 figs.

A Review on Strengthening Steel Beams Using FRP under Fatigue

Directory of Open Access Journals (Sweden)

Mohamed Kamruzzaman

2014-01-01

Full Text Available In recent decades, the application of fibre-reinforced polymer (FRP composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems.

A review on strengthening steel beams using FRP under fatigue.

Science.gov (United States)

Kamruzzaman, Mohamed; Jumaat, Mohd Zamin; Sulong, N H Ramli; Islam, A B M Saiful

2014-01-01

In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems.

A Review on Strengthening Steel Beams Using FRP under Fatigue

Science.gov (United States)

Jumaat, Mohd Zamin; Ramli Sulong, N. H.

2014-01-01

In recent decades, the application of fibre-reinforced polymer (FRP) composites for strengthening structural elements has become an efficient option to meet the increased cyclic loads or repair due to corrosion or fatigue cracking. Hence, the objective of this study is to explore the existing FRP reinforcing techniques to care for fatigue damaged structural steel elements. This study covers the surface treatment techniques, adhesive curing, and support conditions under cyclic loading including fatigue performance, crack propagation, and failure modes with finite element (FE) simulation of the steel bridge girders and structural elements. FRP strengthening composites delay initial cracking, reduce the crack growth rate, extend the fatigue life, and decrease the stiffness decay with residual deflection. Prestressed carbon fibre-reinforced polymer (CFRP) is the best strengthening option. End anchorage prevents debonding of the CRRP strips at the beam ends by reducing the local interfacial shear and peel stresses. Hybrid-joint, nanoadhesive, and carbon-flex can also be attractive for strengthening systems. PMID:25243221

Round robin 'Impurities in uranium matrix': a success for CETAMA and IAEA

International Nuclear Information System (INIS)

Granier, Guy; Roudil, Daniele; Balsley, Steven Devry; Bulyha, Siarhei; Aregbe, Yetunde

2012-01-01

The safeguard of nuclear material is of paramount importance to the IAEA which increasingly uses this information for characterization purposes in order to strengthen the verification of declared nuclear material and to identify the origin of samples from mines. IAEA tasked CETAMA to conduct a round robin with objective to evaluate the capability of laboratories to measure impurities in uranium with concentration levels between 1 and 500 ppm relative to uranium. This round robin was attended by 17 international laboratories from the nuclear industry and safeguards community. The results are mainly obtained by ICP-MS and ICP-AES. The synthesis of this round robin were helpful in identifying anomalies and will allow the IAEA to better set realistic measurement performance targets for ICP-MS and ICP-AES. (authors)

Former uranium mine-induced effects in caged roach: a multiparametric approach for the evaluation of in situ metal toxicity.

Science.gov (United States)

Gagnaire, Béatrice; Bado-Nilles, Anne; Betoulle, Stéphane; Amara, Rachid; Camilleri, Virginie; Cavalié, Isabelle; Chadili, Edith; Delahaut, Laurence; Kerambrun, Elodie; Orjollet, Daniel; Palluel, Olivier; Sanchez, Wilfried

2015-01-01

To characterize environmental risks linked to former uranium mines in the Limousin region of France, a study was conducted on fish health effects from uranium releases. Two private ponds were compared in this study, one with uranium contamination and one background site, upstream of the mining zone. Roach, Rutilus rutilus, were caged for 28 days in both ponds. Physico-chemical parameters of water and sediments and bioaccumulation of metals in several organs were determined. After 14 and 28 days of caging, immune, oxidative stress, biotransformation, neurotoxicity and physiological parameters were measured. Iron and aluminium were quantified in the water of both sites; however, barium and manganese were only present in the water of the uranium contaminated site. Uranium was present in both sites but at very different concentrations. The sediments from the uranium contaminated site contained high levels of radioactive elements coming from the disintegration chain of uranium. Results of biological parameters indicated stimulation of immune parameters and of oxidative stress and a decrease of AChE in fish caged in the uranium contaminated pond compared to the uranium-free pond. Overall, the results determined roach health status in the context of pollution from poly-metallic mining. The data strengthen our knowledge of the environmental risk assessment associated with radioactive substances in the environment.

Recovery of uranium from crude uranium tetrafluoride

Energy Technology Data Exchange (ETDEWEB)

Ghosh, S K; Bellary, M P; Keni, V S [Chemical Engineering Division, Bhabha Atomic Research Centre, Mumbai (India)

1994-06-01

An innovative process has been developed for recovery of uranium from crude uranium tetrafluoride cake. The process is based on direct dissolution of uranium tetrafluoride in nitric acid in presence of aluminium hydroxide and use of solvent extraction for removal of fluorides and other bulk impurities to make uranium amenable for refining. It is a simple process requiring minimum process step and has advantage of lesser plant corrosion. This process can be applied for processing of uranium tetrafluoride generated from various sources like uranium by-product during thorium recovery from thorium concentrate, first stage product of uranium recovery from phosphoric acid by OPPA process and off grade uranium tetrafluoride material. The paper describes the details of the process developed and demonstrated on bench and pilot scale and its subsequent modification arising out of bulky solid waste generation. The modified process uses a lower quantity of aluminium hydroxide by allowing a lower dissolution of uranium per cycle and recycles the undissolved material to the next cycle, maintaining the overall recovery at high level. This innovation has reduced the solid waste generated by a factor of four at the cost of a slightly larger dissolution vessel and its increased corrosion rate. (author). 4 refs., 1 fig., 3 tabs.

Recovery of uranium from crude uranium tetrafluoride

International Nuclear Information System (INIS)

Ghosh, S.K.; Bellary, M.P.; Keni, V.S.

1994-01-01

An innovative process has been developed for recovery of uranium from crude uranium tetrafluoride cake. The process is based on direct dissolution of uranium tetrafluoride in nitric acid in presence of aluminium hydroxide and use of solvent extraction for removal of fluorides and other bulk impurities to make uranium amenable for refining. It is a simple process requiring minimum process step and has advantage of lesser plant corrosion. This process can be applied for processing of uranium tetrafluoride generated from various sources like uranium by-product during thorium recovery from thorium concentrate, first stage product of uranium recovery from phosphoric acid by OPPA process and off grade uranium tetrafluoride material. The paper describes the details of the process developed and demonstrated on bench and pilot scale and its subsequent modification arising out of bulky solid waste generation. The modified process uses a lower quantity of aluminium hydroxide by allowing a lower dissolution of uranium per cycle and recycles the undissolved material to the next cycle, maintaining the overall recovery at high level. This innovation has reduced the solid waste generated by a factor of four at the cost of a slightly larger dissolution vessel and its increased corrosion rate. (author)

Indirect determination of uranium by atomic-absorption spectrophotometry using an air-acetylene flame

International Nuclear Information System (INIS)

Alder, J.F.; Das, B.C.

1977-01-01

An indirect method has been developed for the determination of uranium by atomic-absorption spectrophotometry using an air-acetylene flame. Use is made of the reduction of copper(II) by uranium(IV) followed by complex formation of the copper(I) ions so produced with neocuproine (2,9-dimethyl-1,10-phenanthroline) and finally the determination of copper in this complex by atomic-absorption spectrophotometry. The results show that the method can be recommended, provided that care is taken to ensure the complete reduction of uranium(VI) to uranium(IV). The sensitivity of the method is 4.9 μg of uranium and the upper limit 500 μg without dilution. (author)

Reflections on the reporting of the uranium spot price

International Nuclear Information System (INIS)

Novak, E.D.

1984-01-01

Reporting of the Spot Uranium Price does not represent the uranium market, but actually represents the extremities of a market. The Spot Prices tend to cause instabilities in the market if relied upon too heavily and an excessive use will actually support a questionable transition from a fuel supply industry to a commodities industry. Utility fuel buyers and uranium sellers must be careful how they use the Spot Price, or they will continue to create an unstable supply/demand relationship. But, since we all rely upon statistics for the illusion of independence, we may get the commodities market, assisted along by the information people, whether we want it or not

Leaching and solvent extraction at Mary Kathleen Uranium Ltd

International Nuclear Information System (INIS)

Richmond, G.D.

1978-01-01

Mary Kathleen Uranium Ltd. recommenced operations in early 1976 following a twelve year period of care and maintenance. Several sections of the plant were modified or completely changed for the second operation. The most important change was the replacement of ion exchange with solvent extraction as the means of purifying and upgrading uranium rich solutions. Most of the problems experienced in the solvent extraction system originate from the leach liquor which has a strong tendency to form stable emulsions. This has been countered by some careful control of leaching conditions and by closer observation of operations in the solvent extraction area. Most problems have now been resolved and plant recoveries are quite satisfactory

Analytical method of uranium (IV) and uranium (VI) in uranium ores and uranium-bearing rocks

International Nuclear Information System (INIS)

Shen Zhuqin; Zheng Yongfeng; Li Qingzhen; Zhong Miaolan; Gu Dingxiang

1995-11-01

The best conditions for keeping the original valences of uranium during the dissolution and separation procedure of geological samples (especially those micro uranium-bearing rock) were studied. With the exist of high concentration protectants, the sample was decomposed with concentration HF at 40 +- 5 degree C. The U(VI) was dissolved completely and formed stable complex UO 2 F 2 , the U(IV) was precipitated rapidly and carried by carrier. Quantitative separation was carried out immediately with suction. The decomposition of sample and separation of solid/liquid phases was completed within two minutes. After separation, the U(IV) and U(VI) were determined quantitatively with laser fluorescence or voltametry respectively according to the uranium content. The limit of detection for this method is 0.7 μg/g, RSD is 10.5%, the determinate range of uranium is 2 x 10 -6 ∼10 -1 g/g. The uranium contents and their valence state ratio were measured for more than one hundred samples of sand stone and granite, the accuracy and precision of these results are satisfactory for uranium geological research. (12 tabs.; 11 refs.)

Reduction of uranium hexafluoride to uranium tetrafluoride

International Nuclear Information System (INIS)

Chang, I.S.; Do, J.B.; Choi, Y.D.; Park, M.H.; Yun, H.H.; Kim, E.H.; Kim, Y.W.

1982-01-01

The single step continuous reduction of uranium hexafluoride (UF 6 ) to uranium tetrafluoride (UF 4 ) has been investigated. Heat required to initiate and maintain the reaction in the reactor is supplied by the highly exothermic reaction of hydrogen with a small amount of elemental fluorine which is added to the uranium hexafluoride stream. When gases uranium hexafluoride and hydrogen react in a vertical monel pipe reactor, the green product, UF 4 has 2.5g/cc in bulk density and is partly contaminated by incomplete reduction products (UF 5 ,U 2 F 9 ) and the corrosion product, presumably, of monel pipe of the reactor itself, but its assay (93% of UF 4 ) is acceptable for the preparation of uranium metal with magnesium metal. Remaining problems are the handling of uranium hexafluoride, which is easily clogging the flowmeter and gas feeding lines because of extreme sensitivity toward moisture, and a development of gas nozzel for free flow of uranium hexafluoride gas. (Author)

Quantification of the effect of in-situ generated uranium metal on the experimentally determined O/U ratio of a sintered uranium dioxide fuel pellet

International Nuclear Information System (INIS)

Narasimha Murty, B.; Bharati Misra, U.; Yadav, R.B.; Srivastava, R.K.

2005-01-01

This paper describes quantitatively the effect of in-situ generated uranium metal (that could be formed due to the conducive manufacturing conditions) in a sintered uranium dioxide fuel pellet on the experimentally determined O/U ratio using analytical methods involving dissolution of the pellet material. To quantify the effect of in-situ generated uranium metal in the fuel pellet, a mathematical expression is derived for the actual O/U ratio in terms of the O/U ratio as determined by an experiment involving dissolution of the material and the quantity of uranium metal present in the uranium dioxide pellet. The utility of this derived mathematical expression is demonstrated by tabulating the calculated actual O/U ratios for varying amounts of uranium metal (from 5 to 95% in 5% intervals) and different O/U ratio values (from 2.001 to 2.015 in 0.001 intervals). This paper brings out the necessity of care to be exercised while interpreting the experimentally determined O/U ratio and emphasizes the fact that it is always safer to produce the nuclear fuel with oxygen to uranium ratios well below the specified maximum limit of 2.015. (author)

Strengthening of Shear Walls

DEFF Research Database (Denmark)

Hansen, Christian Skodborg

The theory for concrete structures strengthened with fiber reinforced polymer materials has been developing for approximately two decades, and there are at the present time numerous guidelines covering strengthening of many commonly encountered structural building elements. Strengthening of in...... that describes a unit width strip of a strengthened disk. The unit width strip is named a strengthened concrete tension member and contains a single tensile crack and four debonding cracks. Analysis of the member results in closed form expressions for the load-crack opening relationship. Further analysis...... of the response, results in the ability to determine and characterize the two-way crack propagation, i.e. the relationship between tensile cracking in the concrete and interface debonding between strengthening and concrete. Using the load-crack opening relationship from the strengthened concrete tension member...

Precise coulometric titration of uranium in a high-purity uranium metal and in uranium compounds

International Nuclear Information System (INIS)

Tanaka, Tatsuhiko; Yoshimori, Takayoshi

1975-01-01

Uranium in uranyl nitrate, uranium trioxide and a high-purity uranium metal was assayed by the coulometric titration with biamperometric end-point detection. Uranium (VI) was reduced to uranium (IV) by solid bismuth amalgam in 5M sulfuric acid solution. The reduced uranium was reoxidized to uranium (VI) with a large excess of ferric ion at a room temperature, and the ferrous ion produced was titrated with the electrogenerated manganese(III) fluoride. In the analyses of uranium nitrate and uranium trioxide, the results were precise enough when the error from uncertainty in water content in the samples was considered. The standard sample of pure uranium metal (JAERI-U4) was assayed by the proposed method. The sample was cut into small chips of about 0.2g. Oxides on the metal surface were removed by the procedure shown by National Bureau of Standards just before weighing. The mean assay value of eleven determinations corrected for 3ppm of iron was (99.998+-0.012) % (the 95% confidence interval for the mean), with a standard deviation of 0.018%. The proposed coulometric method is simple and permits accurate and precise determination of uranium which is matrix constituent in a sample. (auth.)

31 CFR 540.317 - Uranium feed; natural uranium feed.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Uranium feed; natural uranium feed... (Continued) OFFICE OF FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.317 Uranium feed; natural uranium feed. The...

Uranium exploration

International Nuclear Information System (INIS)

De Voto, R.H.

1984-01-01

This paper is a review of the methodology and technology that are currently being used in varying degrees in uranium exploration activities worldwide. Since uranium is ubiquitous and occurs in trace amounts (0.2 to 5 ppm) in virtually all rocks of the crust of the earth, exploration for uranium is essentially the search of geologic environments in which geologic processes have produced unusual concentrations of uranium. Since the level of concentration of uranium of economic interest is dependent on the present and future price of uranium, it is appropriate here to review briefly the economic realities of uranium-fueled power generation. (author)

Uranium

International Nuclear Information System (INIS)

1982-01-01

The development, prospecting, research, processing and marketing of South Africa's uranium industry and the national policies surrounding this industry form the headlines of this work. The geology of South Africa's uranium occurences and their positions, the processes used in the extraction of South Africa's uranium and the utilisation of uranium for power production as represented by the Koeberg nuclear power station near Cape Town are included in this publication

Influence of uranium hydride oxidation on uranium metal behaviour

International Nuclear Information System (INIS)

Patel, N.; Hambley, D.; Clarke, S.A.; Simpson, K.

2013-01-01

This work addresses concerns that the rapid, exothermic oxidation of active uranium hydride in air could stimulate an exothermic reaction (burning) involving any adjacent uranium metal, so as to increase the potential hazard arising from a hydride reaction. The effect of the thermal reaction of active uranium hydride, especially in contact with uranium metal, does not increase in proportion with hydride mass, particularly when considering large quantities of hydride. Whether uranium metal continues to burn in the long term is a function of the uranium metal and its surroundings. The source of the initial heat input to the uranium, if sufficient to cause ignition, is not important. Sustained burning of uranium requires the rate of heat generation to be sufficient to offset the total rate of heat loss so as to maintain an elevated temperature. For dense uranium, this is very difficult to achieve in naturally occurring circumstances. Areas of the uranium surface can lose heat but not generate heat. Heat can be lost by conduction, through contact with other materials, and by convection and radiation, e.g. from areas where the uranium surface is covered with a layer of oxidised material, such as burned-out hydride or from fuel cladding. These rates of heat loss are highly significant in relation to the rate of heat generation by sustained oxidation of uranium in air. Finite volume modelling has been used to examine the behaviour of a magnesium-clad uranium metal fuel element within a bottle surrounded by other un-bottled fuel elements. In the event that the bottle is breached, suddenly, in air, it can be concluded that the bulk uranium metal oxidation reaction will not reach a self-sustaining level and the mass of uranium oxidised will likely to be small in relation to mass of uranium hydride oxidised. (authors)

Influence of uranium hydride oxidation on uranium metal behaviour

Energy Technology Data Exchange (ETDEWEB)

Patel, N.; Hambley, D. [National Nuclear Laboratory (United Kingdom); Clarke, S.A. [Sellafield Ltd (United Kingdom); Simpson, K.

2013-07-01

This work addresses concerns that the rapid, exothermic oxidation of active uranium hydride in air could stimulate an exothermic reaction (burning) involving any adjacent uranium metal, so as to increase the potential hazard arising from a hydride reaction. The effect of the thermal reaction of active uranium hydride, especially in contact with uranium metal, does not increase in proportion with hydride mass, particularly when considering large quantities of hydride. Whether uranium metal continues to burn in the long term is a function of the uranium metal and its surroundings. The source of the initial heat input to the uranium, if sufficient to cause ignition, is not important. Sustained burning of uranium requires the rate of heat generation to be sufficient to offset the total rate of heat loss so as to maintain an elevated temperature. For dense uranium, this is very difficult to achieve in naturally occurring circumstances. Areas of the uranium surface can lose heat but not generate heat. Heat can be lost by conduction, through contact with other materials, and by convection and radiation, e.g. from areas where the uranium surface is covered with a layer of oxidised material, such as burned-out hydride or from fuel cladding. These rates of heat loss are highly significant in relation to the rate of heat generation by sustained oxidation of uranium in air. Finite volume modelling has been used to examine the behaviour of a magnesium-clad uranium metal fuel element within a bottle surrounded by other un-bottled fuel elements. In the event that the bottle is breached, suddenly, in air, it can be concluded that the bulk uranium metal oxidation reaction will not reach a self-sustaining level and the mass of uranium oxidised will likely to be small in relation to mass of uranium hydride oxidised. (authors)

Uranium conversion; Urankonvertering

Energy Technology Data Exchange (ETDEWEB)

Oliver, Lena; Peterson, Jenny; Wilhelmsen, Katarina [Swedish Defence Research Agency (FOI), Stockholm (Sweden)

2006-03-15

FOI, has performed a study on uranium conversion processes that are of importance in the production of different uranium compounds in the nuclear industry. The same conversion processes are of interest both when production of nuclear fuel and production of fissile material for nuclear weapons are considered. Countries that have nuclear weapons ambitions, with the intention to produce highly enriched uranium for weapons purposes, need some degree of uranium conversion capability depending on the uranium feed material available. This report describes the processes that are needed from uranium mining and milling to the different conversion processes for converting uranium ore concentrate to uranium hexafluoride. Uranium hexafluoride is the uranium compound used in most enrichment facilities. The processes needed to produce uranium dioxide for use in nuclear fuel and the processes needed to convert different uranium compounds to uranium metal - the form of uranium that is used in a nuclear weapon - are also presented. The production of uranium ore concentrate from uranium ore is included since uranium ore concentrate is the feed material required for a uranium conversion facility. Both the chemistry and principles or the different uranium conversion processes and the equipment needed in the processes are described. Since most of the equipment that is used in a uranium conversion facility is similar to that used in conventional chemical industry, it is difficult to determine if certain equipment is considered for uranium conversion or not. However, the chemical conversion processes where UF{sub 6} and UF{sub 4} are present require equipment that is made of corrosion resistant material.

Strengthening primary health care in low- and middle-income countries: generating evidence through evaluation.

Science.gov (United States)

Rule, John; Ngo, Duc Anh; Oanh, Tran Thi Mai; Asante, Augustine; Doyle, Jennifer; Roberts, Graham; Taylor, Richard

2014-07-01

Since the publication of the World Health Report 2008, there has been renewed interest in the potential of primary health care (PHC) to deliver global health policy agendas. The WHO Western Pacific Regional Strategy 2010 states that health systems in low- and middle-income countries (LMICs) can be strengthened using PHC values as core principles. This review article explores the development of an evidence-based approach for assessing the effectiveness of PHC programs and interventions in LMICs. A realist review method was used to investigate whether there is any internationally consistent approach to evaluating PHC. Studies from LMICs using an explicit methodology or framework for measuring PHC effectiveness were collated. Databases of published articles were searched, and a review of gray literature was undertaken to identify relevant reports. The review found no consistent approach for assessing the effectiveness of PHC interventions in LMICs. An innovative approach used in China, which developed a set of core community health facility indicators based on stakeholder input, does show some potential for use in other LMIC contexts. © 2013 APJPH.

Uranium analysis in some food samples collected from Bathinda area of Punjab, India

Science.gov (United States)

Kumar, Mukesh; Prasher, Sangeeta; Singh, Surinder

2009-07-01

To strengthen the radiation protection infrastructure in Bathinda, the uranium concentration in daily diet of the residents has been measured and its associated radiation risks were estimated for the adult population. Food samples were collected from major cancer prone areas of the district, from which daily diets were prepared. These diet samples were analyzed using fission track technique. The measured values of the uranium content were found to vary from 0.38 mBq/g in mustard seeds to 4.60 mBq/g in wheat. In case of milk the uranium content is found to vary from 28.57-213.36 mBq/ℓ with mean concentration of 61.35 mBq/ℓ. This leads to a daily dietary intake of 0.90 Bq/day. The measured value of 0.90 Bq d-1, contributes to 1.12 mSv to the cumulative effective dose to the population. This dose is much large than the International Commission for Radiological Protection (ICRP) annual effective dose limit of 1 mSv for the general public [1]. Therefore, it would pose significant health hazard.

Equity in Health and Health Financing: Building and Strengthening ...

International Development Research Centre (IDRC) Digital Library (Canada)

Equity in Health and Health Financing: Building and Strengthening Developing Country Networks. Equity in health is a pressing global concern. Disparities in health status and access to health care within and across countries are both a cause and a consequence of social inequality. Access to health services continues to ...

Uranium Mill Tailings Radiation Control Act of 1978

International Nuclear Information System (INIS)

Magee, J.

1980-01-01

The long-term environmental effects of the Uranium Mill Tailings Radiation Control Act of 1978 address the public health hazards of radioactive wastes and recognize the significance of this issue to public acceptance of nuclear energy. Title I of the Act deals with stabilizing and controlling mill tailings at inactive sites and classifies the sites by priority. It represents a major Federal commitment. Title II changes and strengthens Nuclear Regulatory Commission authority, but it will have little overall impact. It is not possible to assess the Act's effect because there is no way to know if current technology will be adequate for the length of time required. 76 references

Uranium

International Nuclear Information System (INIS)

Mackay, G.A.

1978-01-01

The author discusses the contribution made by various energy sources in the production of electricity. Estimates are made of the future nuclear contribution, the future demand for uranium and future sales of Australian uranium. Nuclear power growth in the United States, Japan and Western Europe is discussed. The present status of the six major Australian uranium deposits (Ranger, Jabiluka, Nabarlek, Koongarra, Yeelerrie and Beverley) is given. Australian legislation relevant to the uranium mining industry is also outlined

Effective educator-student relationships in nursing education to strengthen nursing students' resilience.

Science.gov (United States)

Froneman, Kathleen; Du Plessis, Emmerentia; Koen, Magdelene P

2016-06-10

Little research has been conducted in private nursing schools with regard to the educator-student relationship to strengthen the resilience of nursing students and to improve the educator-student relationship. An effective educator-student relationship is a key factor to ensure a positive learning climate where learning can take place and resilience can be strengthened. The purpose was to explore and describe nursing students' view on the basic elements required for an effective educator-student relationship to strengthen their resilience and the educator-student relationship. This study followed an explorative, descriptive and contextual qualitative design in a private nursing education institution in the North West Province. Purposive sampling was used. The sample consisted of 40 enrolled nursing auxiliary students. The World Café Method was used to collect data, which were analysed by means of content analysis. The following five main themes were identified and included: (1) teaching-learning environment, (2) educator-student interaction, (3) educator qualities, (4) staying resilient and (5) strategies to strengthen resilience. Students need a caring and supportive environment; interaction that is constructive, acknowledges human rights and makes use of appropriate non-verbal communication. The educator must display qualities such as love and care, respect, responsibility, morality, patience, being open to new ideas, motivation, willingness to 'go the extra mile' and punctuality. Students reported on various ways how they manage to stay resilient. It thus seems that basic elements required in an effective educator-student relationship to strengthen the resilience of students include the environment, interaction, educator and student's qualities and resilience.

Thirty years of uranium ore processing in Spain

International Nuclear Information System (INIS)

Josa, J.M.

1982-01-01

Spanish background in the uranium ore processing includes ores from pegmatitic type deposits, vein deposits, sandstone, enrichments in metamorphic rocks, radioactive coals and non-conventional sources of uranium, such as wet phosphoric acid or copper liquors. Some tests have also done in order to recover uranium from very low grade paleozoic quartzites. We have also been involved in by-products recovery (copper) from uranium ores. The technologies that have been used are: physical concentration, combustion and roasting, conventional alkaline or acid methods, pressure, heap and bacteria leaching. Special attention was paid to recover uranium from the pregnant liquors and to develop suited equipment for it; solvent extraction and continuous ion exchange equipment was carefully studied. We have been involved in commercial size (500-3000 t/d) mills, but we have also developed transportable and reussable modular plants specially designed and suited to recover uranium from small and isolated deposits. In both cases the reduction of the environmental impact was taken in account. Spanish experience also includes nuclear purification aspects in order to get uranium nuclear compounds (ADU, UO 2 , UF 4 and UF 6 ). Wet (nitric-TBP) and dry (Fluid-bed) methods have been used. The best of these 30 years of experience in studies and in industrial practice, together with our new developments towards the future, could become in a good contribution for the medium size countries which are going to develop its own uranium industry. The way for these countries could be easier if they know what is valuable and what must be avoid in the uranium ore processing development. In this aim the whole paper was thought and written. (author)

Czechoslovak uranium

International Nuclear Information System (INIS)

Pluskal, O.

1992-01-01

Data and knowledge related to the prospecting, mining, processing and export of uranium ores in Czechoslovakia are presented. In the years between 1945 and January 1, 1991, 98,461.1 t of uranium were extracted. In the period 1965-1990 the uranium industry was subsidized from the state budget to a total of 38.5 billion CSK. The subsidies were put into extraction, investments and geologic prospecting; the latter was at first, ie. till 1960 financed by the former USSR, later on the two parties shared costs on a 1:1 basis. Since 1981 the prospecting has been entirely financed from the Czechoslovak state budget. On Czechoslovak territory uranium has been extracted from deposits which may be classified as vein-type deposits, deposits in uranium-bearing sandstones and deposits connected with weathering processes. The future of mining, however, is almost exclusively being connected with deposits in uranium-bearing sandstones. A brief description and characteristic is given of all uranium deposits on Czechoslovak territory, and the organization of uranium mining in Czechoslovakia is described as is the approach used in the world to evaluate uranium deposits; uranium prices and actual resources are also given. (Z.S.) 3 figs

Uranium in Niger; L'uranium au Niger

Energy Technology Data Exchange (ETDEWEB)

Gabelmann, E

1978-03-15

This document presents government policy in the enhancement of uranium resources, existing mining companies and their productions, exploitation projects and economical outcome related to the uranium mining and auxiliary activities. [French] Le document presente la politique de l'Etat dans le cadre de la mise en valeur des ressources d'uranium, les societes minieres existantes et leurs productions, les projets d'exploitation d'uranium et les retombees economiques liees aux activites uraniferes et connexes.

Status Report from Australia [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Stewart, J R [Australian Atomic Energy Commission, Coogee, NSW (Australia)

1967-06-15

During the period 1954-59, five plants for the production of uranium chemical concentrates (yellowcake) were constructed in Australia. Only one of these is in operation at the present time, but two more have been kept on a 'care-and-maintenance' basis pending revival of the market for uranium. The other two were disbanded after completion of contract production. Brief details of each of the plants are given.

Strengthening maintenance and reconstruction of scientific experiment building and creating a good working environment for scientific research and production

International Nuclear Information System (INIS)

Fu Jianping

2005-01-01

The quality of scientific experiment building directly influences the scientific research work and production. To create a good working environment for scientific research and production, it is necessary to strengthen the maintenance and reconstruction for old scientific experiment building. The paper briefly introduces the site supervisory work of maintaining and reconstructing old scientific experiment building in Beijing Research Institute of Uranium Geology, as well as some measures taken to ensure the project quality, and the reconstructed building. (authors)

Uranium ores

International Nuclear Information System (INIS)

Poty, B.; Roux, J.

1998-01-01

The processing of uranium ores for uranium extraction and concentration is not much different than the processing of other metallic ores. However, thanks to its radioactive property, the prospecting of uranium ores can be performed using geophysical methods. Surface and sub-surface detection methods are a combination of radioactive measurement methods (radium, radon etc..) and classical mining and petroleum prospecting methods. Worldwide uranium prospecting has been more or less active during the last 50 years, but the rise of raw material and energy prices between 1970 and 1980 has incited several countries to develop their nuclear industry in order to diversify their resources and improve their energy independence. The result is a considerable increase of nuclear fuels demand between 1980 and 1990. This paper describes successively: the uranium prospecting methods (direct, indirect and methodology), the uranium deposits (economical definition, uranium ores, and deposits), the exploitation of uranium ores (use of radioactivity, radioprotection, effluents), the worldwide uranium resources (definition of the different categories and present day state of worldwide resources). (J.S.)

Continuum of Care Services for Maternal and Child Health using mobile technology - a health system strengthening strategy in low and middle income countries.

Science.gov (United States)

Balakrishnan, Ramkrishnan; Gopichandran, Vijayaprasad; Chaturvedi, Sharadprakash; Chatterjee, Rahul; Mahapatra, Tanmay; Chaudhuri, Indrajit

2016-07-07

Mobile phone technology is utilized for better delivery of health services worldwide. In low-and-middle income countries mobile phones are now ubiquitous. Thus leveraging mHealth applications in health sector is becoming popular rapidly in these countries. To assess the effectiveness of the Continuum of Care Services (CCS) mHealth platform in terms of strengthening the delivery of maternal and child health (MCH) services in a district in Bihar, a resource-poor state in India. The CommCare mHealth platform was customized to CCS as one of the innovations under a project funded by the Bill and Melinda Gates Foundation to improve the maternal and newborn health services in Bihar. The intervention was rolled out in one project district in Bihar, during July 2012. More than 550 frontline workers out of a total of 3000 including Accredited Social Health Activists, Anganwadi Workers, Auxilliary Nurse Midwives and Lady Health Supervisors were trained to use the mHealth platform. The service delivery components namely early registration of pregnant women, three antenatal visits, tetanus toxoid immunization of the mother, iron and folic acid tablet supply, institutional delivery, postnatal home visits and early initiation of breastfeeding were used as indicators for good quality services. The resultant coverage of these services in the implementation area was compared with rest of Bihar and previous year statistics of the same area. The time lag between delivery of a service and its record capture in the maternal and child tracking system (MCTS) database was computed in a random sample of 16,000 beneficiaries. The coverage of services among marginalized and non-marginalized castes was compared to indicate equity of service delivery. Health system strengthening was viewed from the angle of coverage, quality, equity and efficiency of services. The implementation blocks had higher coverage of all the eight indicator services compared to rest of Bihar and the previous year. There

Fundamental care guided by the Careful Nursing Philosophy and Professional Practice Model©.

Science.gov (United States)

Meehan, Therese Connell; Timmins, Fiona; Burke, Jacqueline

2018-02-05

To propose the Careful Nursing Philosophy and Professional Practice Model © as a conceptual and practice solution to current fundamental nursing care erosion and deficits. There is growing awareness of the crucial importance of fundamental care. Efforts are underway to heighten nurses' awareness of values that motivate fundamental care and thereby increase their attention to effective provision of fundamental care. However, there remains a need for nursing frameworks which motivate nurses to bring fundamental care values to life in their practice and strengthen their commitment to provide fundamental care. This descriptive position paper builds on the Careful Nursing Philosophy and Professional Practice Model © (Careful Nursing). Careful Nursing elaborates explicit nursing values and addresses both relational and pragmatic aspects of nursing practice, offering an ideal guide to provision of fundamental nursing care. A comparative alignment approach is used to review the capacity of Careful Nursing to address fundamentals of nursing care. Careful Nursing provides a value-based comprehensive and practical framework which can strengthen clinical nurses' ability to articulate and control their practice and, thereby, more effectively fulfil their responsibility to provide fundamental care and measure its effectiveness. This explicitly value-based nursing philosophy and professional practice model offers nurses a comprehensive, pragmatic and engaging framework designed to strengthen their control over their practice and ability to provide high-quality fundamental nursing care. © 2018 John Wiley & Sons Ltd.

Pengaruh Kandungan Uranium Dalam Umpan Terhadap Efisiensi Pengendapan Uranium

OpenAIRE

Torowati

2010-01-01

PENGARUH KANDUNGAN URANIUM DALAM UMPAN TERHADAP EFISIENSI PENGENDAPAN URANIUM. Setiap aktivitas analisis di Laboratorium Kendali Kualitas, Bidang Bahan Bakar Nuklir selalu dihasilkan limbah radioaktif cair. Limbah radioaktif cair di laboratorium masih mengandung uranium yang cukup besar ± 0,600 g U/l dengan keasamaan yang cukup besar pula. Karena uranium mempunyai nilai ekonomis yang cukup tinggi maka perlu USAha untuk mengambil kembali uranium tersebut. Pada kegiatan ini telah dilak...

A possibility for strengthening family life and health: Family members' lived experience when a sick child receives home care in Sweden.

Science.gov (United States)

Castor, Charlotte; Landgren, Kajsa; Hansson, Helena; Kristensson Hallström, Inger

2018-03-01

Families often prefer home care to hospital care, and home-care services for ill children are increasing worldwide with limited knowledge of families' needs during curative and palliative home care. The aim of this study was to elucidate family members' lived experience when a sick child received home care from county-based primary healthcare services. A descriptive qualitative design was chosen and 12 families including sick children receiving home care and their mothers, fathers and siblings in the south of Sweden were interviewed between December 2015 and January 2017. The transcribed interviews were analysed using a hermeneutic phenomenological approach. The family members' lived experience was described in three essential themes: "Strengthening family life" relates to how home care induced freedom and luxury in a strained period of life and supported the families' everyday life. Usual social activities and relations were maintained as time and energy was saved when receiving home care. "Promoting health" relates to how the family members' burden of illness decreased as the child's signs of illness alleviated and the well-being of the whole family increased when the child received care in the home. This provided a peaceful respite for family members' psychosocial recovery. The third theme, "Creating alliances," relates to the importance of creating trustful alliances for communicating participation in care. If trustful alliances were not created, parents felt an overwhelming responsibility and family members became anxious. The findings suggest that care in the family's home is a useful complement to hospital care. Home care should be given with close attention to family members' needs and conditions, as positive effects of home care might be jeopardised when expectations and possibilities are not successfully shared. © 2017 The Authors. Health and Social Care in the Community Published by John Wiley & Sons Ltd.

Glances on uranium. From uranium in the earth to electric power

International Nuclear Information System (INIS)

Valsardieu, C.

1995-01-01

This book is a technical, scientific and historical analysis of the nuclear fuel cycle from the origin of uranium in the earth and the exploitation of uranium ores to the ultimate storage of radioactive wastes. It comprises 6 chapters dealing with: 1) the different steps of uranium history (discovery, history of uranium chemistry, the radium era, the physicists and the structure of matter, the military uses, the nuclear power, the uranium industry and economics), 2) the uranium in nature (nuclear structure, physical-chemical properties, radioactivity, ores, resources, cycle, deposits), 3) the sidelights on uranium history (mining, prospecting, experience, ore processing, resources, reserves, costs), 4) the uranium in the fuel cycle, energy source and industrial product (fuel cycle, fission, refining, enrichment, fuel processing and reprocessing, nuclear reactors, wastes management), 5) the other energies in competition and the uranium market (other uranium uses, fossil fuels and renewable energies, uranium market), and 6) the future of uranium (forecasting, ecology, economics). (J.S.)

Regulatory preparations towards commencement of uranium mining and processing of radioactive ores in Tanzania

International Nuclear Information System (INIS)

Gurisha, M.; Kim, C-L.

2014-01-01

The regulatory preparatory work undertaken by the government of the United Republic of Tanzania through the Tanzania Atomic Energy Commission (TAEC) following the Mkuyu River Uranium Project definitive feasibility study is discussed. The project, which has been taken over by ARMZ Uranium One, acquired a construction permit in April 2013, where by 345 km"2 of land inside the 50,000 km"2 world heritage Selous Game Reserve was allocated for the purpose. The project has been realized through the government effort to strengthen the regulatory framework via the revised Atomic Energy Act No.7 of 2003, preparations of Radiation Safety in Mining and Radioactive Ores Regulations of 2011, and the human resource capacity development in areas related to inspection and licensing. Sample collection in Bahi and Manyoni areas in the central part of the country to investigate uranium uptake from the plants and radioactivity from water and plant samples is ongoing. The regulatory preparatory work will provide an opportunity to the public to comprehend the measures undertaken by TAEC to protect human health and the environment. (author)

Uranium prospecting; La prospection de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Roubault, M [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-07-01

This report is an instruction book for uranium prospecting. It appeals to private prospecting. As prospecting is now a scientific and technical research, it cannot be done without preliminary studies. First of all, general prospecting methods are given with a recall of fundamental geologic data and some general principles which are common with all type of prospecting. The peculiarities of uranium prospecting are also presented and in particular the radioactivity property of uranium as well as the special aspect of uranium ores and the aspect of neighbouring ores. In a third part, a description of the different uranium ores is given and separated in two different categories: primary and secondary ores, according to the place of transformation, deep or near the crust surface respectively. In the first category, the primary ores include pitchblende, thorianite and rare uranium oxides as euxenite and fergusonite for example. In the second category, the secondary ores contain autunite and chalcolite for example. An exhaustive presentation of the geiger-Mueller counter is given with the presentation of its different components, its functioning and utilization and its maintenance. The radioactivity interpretation method is showed as well as the elaboration of a topographic map of the measured radioactivity. A brief presentation of other detection methods than geiger-Mueller counters is given: the measurement of fluorescence and a chemical test using the fluorescence properties of uranium salts. Finally, the main characteristics of uranium deposits are discussed. (M.P.)

Uranium

International Nuclear Information System (INIS)

Stewart, E.D.J.

1974-01-01

A discussion is given of uranium as an energy source in The Australian economy. Figures and predictions are presented on the world supply-demand position and also figures are given on the added value that can be achieved by the processing of uranium. Conclusions are drawn about Australia's future policy with regard to uranium (R.L.)

Uranium, depleted uranium, biological effects

International Nuclear Information System (INIS)

2001-01-01

Physicists, chemists and biologists at the CEA are developing scientific programs on the properties and uses of ionizing radiation. Since the CEA was created in 1945, a great deal of research has been carried out on the properties of natural, enriched and depleted uranium in cooperation with university laboratories and CNRS. There is a great deal of available data about uranium; thousands of analyses have been published in international reviews over more than 40 years. This presentation on uranium is a very brief summary of all these studies. (author)

Solubility measurement of uranium in uranium-contaminated soils

International Nuclear Information System (INIS)

Lee, S.Y.; Elless, M.; Hoffman, F.

1993-08-01

A short-term equilibration study involving two uranium-contaminated soils at the Fernald site was conducted as part of the In Situ Remediation Integrated Program. The goal of this study is to predict the behavior of uranium during on-site remediation of these soils. Geochemical modeling was performed on the aqueous species dissolved from these soils following the equilibration study to predict the on-site uranium leaching and transport processes. The soluble levels of total uranium, calcium, magnesium, and carbonate increased continually for the first four weeks. After the first four weeks, these components either reached a steady-state equilibrium or continued linearity throughout the study. Aluminum, potassium, and iron, reached a steady-state concentration within three days. Silica levels approximated the predicted solubility of quartz throughout the study. A much higher level of dissolved uranium was observed in the soil contaminated from spillage of uranium-laden solvents and process effluents than in the soil contaminated from settling of airborne uranium particles ejected from the nearby incinerator. The high levels observed for soluble calcium, magnesium, and bicarbonate are probably the result of magnesium and/or calcium carbonate minerals dissolving in these soils. Geochemical modeling confirms that the uranyl-carbonate complexes are the most stable and dominant in these solutions. The use of carbonate minerals on these soils for erosion control and road construction activities contributes to the leaching of uranium from contaminated soil particles. Dissolved carbonates promote uranium solubility, forming highly mobile anionic species. Mobile uranium species are contaminating the groundwater underlying these soils. The development of a site-specific remediation technology is urgently needed for the FEMP site

Uranium complex recycling method of purifying uranium liquors

International Nuclear Information System (INIS)

Elikan, L.; Lyon, W.L.; Sundar, P.S.

1976-01-01

Uranium is separated from contaminating cations in an aqueous liquor containing uranyl ions. The liquor is mixed with sufficient recycled uranium complex to raise the weight ratio of uranium to said cations preferably to at least about three. The liquor is then extracted with at least enough non-interfering, water-immiscible, organic solvent to theoretically extract about all of the uranium in the liquor. The organic solvent contains a reagent which reacts with the uranyl ions to form a complex soluble in the solvent. If the aqueous liquor is acidic, the organic solvent is then scrubbed with water. The organic solvent is stripped with a solution containing at least enough ammonium carbonate to precipitate the uranium complex. A portion of the uranium complex is recycled and the remainder can be collected and calcined to produce U 3 O 8 or UO 2

Strengthening the role of the ward manager: a review of the literature.

Science.gov (United States)

Pegram, Anne M; Grainger, Michelle; Sigsworth, Janice; While, Alison E

2014-09-01

The role of the ward manager is integral to service delivery, however, they may lack the necessary authority and autonomy to achieve the organisation and delivery of patient care. To identify initiatives that have strengthened the ward manager role. A review of published literature was undertaken. Data included were drawn from a variety of sources, including policy, professional literature and research studies. Three policy initiatives were identified along with two innovations from ward managers and two recent professional organisation campaigns. One innovation was identified that could improve the process of care delivery thus empowering ward managers' decision making. The literature identified the need for a review of the role, and adequate administrative support and training for the role. The literature reviewed provided little evidence of initiatives to strengthen the role of the ward manager, highlighting the imperative to develop an evidence base. There was consensus on the importance of education and training before and during appointment to the position. The role of the ward manager remains pivotal in care delivery. The focus should be on how best to support ward managers in achieving their role within health-care systems. © 2013 John Wiley & Sons Ltd.

Uranium

International Nuclear Information System (INIS)

Toens, P.D.

1981-03-01

The geological setting of uranium resources in the world can be divided in two basic categories of resources and are defined as reasonably assured resources, estimated additional resources and speculative resources. Tables are given to illustrate these definitions. The increasing world production of uranium despite the cutback in the nuclear industry and the uranium requirements of the future concluded these lecture notes

Transformations of highly enriched uranium into metal or oxide

International Nuclear Information System (INIS)

Nollet, P.; Sarrat, P.

1964-01-01

The enriched uranium workshops in Cadarache have a double purpose on the one hand to convert uranium hexafluoride into metal or oxide, and on the other hand to recover the uranium contained in scrap materials produced in the different metallurgical transformations. The principles that have been adopted for the design and safety of these workshops are reported. The nuclear safety is based on the geometrical limitations of the processing vessels. To establish the processes and the technology of these workshops, many studies have been made since 1960, some of which have led to original achievements. The uranium hexafluoride of high isotopic enrichment is converted either by injection of the gas into ammonia or by an original process of direct hydrogen reduction to uranium tetrafluoride. The uranium contained m uranium-zirconium metal scrap can be recovered by combustion with hydrogen chloride followed treatment of the uranium chloride by fluorine in order to obtain the uranium in the hexafluoride state. Recovery of the uranium contained m various scrap materials is obtained by a conventional refining process combustion of metallic scrap, nitric acid dissolution of the oxide, solvent purification by tributyl phosphate, ammonium diuranate precipitation, calcining, reduction and hydro fluorination into uranium tetrafluoride, bomb reduction by calcium and slag treatment. Two separate workshops operate along these lines one takes care of the uranium with an isotopic enrichment of up to 3 p. 100, the other handles the high enrichments. The handling of each step of this process, bearing in mind the necessity for nuclear safety, has raised some special technological problems and has led to the conception of new apparatus, in particular the roasting furnace for metal turnings, the nitric acid dissolution unit, the continuous precipitator and ever safe filter and dryer for ammonium diuranate, the reduction and hydro fluorination furnace and the slag recovery apparatus These are

Recovery of uranium from uranium bearing black shale

International Nuclear Information System (INIS)

Das, Amrita; Yadav, Manoj; Singh, Ajay K.

2016-01-01

Black shale is the unconventional resource of uranium. Recovery of uranium from black shale has been carried out by the following steps: i) size reduction, ii) leaching of uranium in the aqueous medium, iii) fluoride ion removal, iv) solvent extraction of uranium from the aqueous leach solution, v) scrubbing of the loaded solvent after extraction to remove impurities as much as possible and vi) stripping of uranium from the loaded organic into the aqueous phase. Leaching of black shale has been carried out in hydrochloric acid. Free acidity of the leach solution has been determined by potentiometric titration method. Removal of fluoride ions has been done using sodium chloride. Solvent extraction has been carried out by both tributyl phosphate and alamine-336 as extractants. Scrubbing has been tried with oxalic acid and sulphuric acid. Stripping with sodium carbonate solution has been carried out. Overall recovery of uranium is 95%. (author)

Uranium resources, 1983

International Nuclear Information System (INIS)

1983-01-01

The specific character of uranium as energy resources, the history of development of uranium resources, the production and reserve of uranium in the world, the prospect regarding the demand and supply of uranium, Japanese activity of exploring uranium resources in foreign countries and the state of development of uranium resources in various countries are reported. The formation of uranium deposits, the classification of uranium deposits and the reserve quantity of each type are described. As the geological environment of uranium deposits, there are six types, that is, quartz medium gravel conglomerate deposit, the deposit related to the unconformity in Proterozoic era, the dissemination type magma deposit, pegmatite deposit and contact deposit in igneaus rocks and metamorphic rocks, vein deposit, sandstone type deposit and the other types of deposit. The main features of respective types are explained. The most important uranium resources in Japan are those in the Tertiary formations, and most of the found reserve belongs to this type. The geological features, the state of yield and the scale of the deposits in Ningyotoge, Tono and Kanmon Mesozoic formation are reported. Uranium minerals, the promising districts in the world, and the matters related to the exploration and mining of uranium are described. (Kako, I.)

Uranium management activities

International Nuclear Information System (INIS)

Jackson, D.; Marshall, E.; Sideris, T.; Vasa-Sideris, S.

2001-01-01

One of the missions of the Department of Energy's (DOE) Oak Ridge Office (ORO) has been the management of the Department's uranium materials. This mission has been accomplished through successful integration of ORO's uranium activities with the rest of the DOE complex. Beginning in the 1980's, several of the facilities in that complex have been shut down and are in the decommissioning process. With the end of the Cold War, the shutdown of many other facilities is planned. As a result, inventories of uranium need to be removed from the Department facilities. These inventories include highly enriched uranium (HEU), low enriched uranium (LEU), normal uranium (NU), and depleted uranium (DU). The uranium materials exist in different chemical forms, including metals, oxides, solutions, and gases. Much of the uranium in these inventories is not needed to support national priorities and programs. (author)

Care zoning in a psychiatric intensive care unit: strengthening ongoing clinical risk assessment.

Science.gov (United States)

Mullen, Antony; Drinkwater, Vincent; Lewin, Terry J

2014-03-01

To implement and evaluate the care zoning model in an eight-bed psychiatric intensive care unit and, specifically, to examine the model's ability to improve the documentation and communication of clinical risk assessment and management. Care zoning guides nurses in assessing clinical risk and planning care within a mental health context. Concerns about the varying quality of clinical risk assessment prompted a trial of the care zoning model in a psychiatric intensive care unit within a regional mental health facility. The care zoning model assigns patients to one of 3 'zones' according to their clinical risk, encouraging nurses to document and implement targeted interventions required to manage those risks. An implementation trial framework was used for this research to refine, implement and evaluate the impact of the model on nurses' clinical practice within the psychiatric intensive care unit, predominantly as a quality improvement initiative. The model was trialled for three months using a pre- and postimplementation staff survey, a pretrial file audit and a weekly file audit. Informal staff feedback was also sought via surveys and regular staff meetings. This trial demonstrated improvement in the quality of mental state documentation, and clinical risk information was identified more accurately. There was limited improvement in the quality of care planning and the documentation of clinical interventions. Nurses' initial concerns over the introduction of the model shifted into overall acceptance and recognition of the benefits. The results of this trial demonstrate that the care zoning model was able to improve the consistency and quality of risk assessment information documented. Care planning and evaluation of associated outcomes showed less improvement. Care zoning remains a highly applicable model for the psychiatric intensive care unit environment and is a useful tool in guiding nurses to carry out routine patient risk assessments. © 2013 John Wiley & Sons

Provision by the uranium and uranium products

International Nuclear Information System (INIS)

Elagin, Yu.P.

2005-01-01

International uranium market is converted from the buyer market into the seller market. The prices of uranium are high and the market attempts to adapt to changing circumstances. The industry of uranium enrichment satisfies the increasing demands but should to increase ots capacities. On the whole the situation is not stable and every year may change the existing position [ru

Uranium mining and rehabilitation: International aspects and examples from Germany

International Nuclear Information System (INIS)

Barthel, F.H.; Mager, D.

1997-01-01

In the period from 1945 to 1994 about 1.87 million t U have been produced worldwide. The maximum of production reached about 70,000 t U in 1981, now the production has fell to about 32,000 t U. Due to the decrease of the annual output, employment in uranium production has decreased, however the productivity has been increased in most countries. As any mining, uranium mining has an impact on the environment. Especially the radioactivity of the ores and waste material may create radiological hazards to the population when protection measures are not observed carefully. The impact of uranium production to the environmental is illustrated by various examples. The costs which are necessary to decommission and rehabilitate uranium production facilities can reach high levels depending on the specifics of the recultivation activities. International examples are given. The production of uranium in Eastern Germany is described briefly, and the reclamation activities of the former Wismut mining and milling facilities is illustrated by selected examples. (author). 5 tabs

Uranium industry framework

International Nuclear Information System (INIS)

Riley, K.

2008-01-01

The global uranium market is undergoing a major expansion due to an increase in global demand for uranium, the highest uranium prices in the last 20 years and recognition of the potential greenhouse benefits of nuclear power. Australia holds approximately 27% of the world's uranium resources (recoverable at under US$80/kg U), so is well placed to benefit from the expansion in the global uranium market. Increasing exploration activity due to these factors is resulting in the discovery and delineation of further high grade uranium deposits and extending Australia's strategic position as a reliable and safe supplier of low cost uranium.

High-temperature thermal conductivity of uranium chromite and uranium niobate

International Nuclear Information System (INIS)

Fedoseev, D.V.; Varshavskaya, I.G.; Lavrent'ev, A.V.; Oziraner, S.N.; Kuznetsova, D.G.

1979-01-01

The technique of determining thermal conductivity coefficient of uranium niobate and uranium chromite on heating with laser radiation is described. Determined is the coefficient of free-convective heat transfer (with provision for a conduction component) by means of a standard specimen. The thermal conductivity coefficients of uranium chromite and niobate were measured in the 1300-1700 K temperature range. The results are presented in a diagram form. It has been calculated, that the thermal conductivity coefficient for uranium niobate specimens is greater in comparison with uranium chromite specimens. The thermal conductivity coefficients of the materials mentioned depend on temperature very slightly. Thermal conductivity of the materials considerably depends on their porosity. The specimens under investigation were fabricated by the pressing method and had the following porosity: uranium chromite - 30 %, uranium niobate - 10 %. Calculation results show, that thermal conductivity of dense uranium chromite is higher than thermal conductivity of dense uranium niobate. The experimental error equals approximately 20 %, that is mainly due to the error of measuring the temperature equal to +-25 deg, with a micropyrometer

Study of reactions between uranium-plutonium mixed oxide and uranium nitride and between uranium oxide and uranium nitride; Etude des reactions entre l`oxyde mixte d`uranium-plutonium et le nitrure d`uranium et entre l`oxyde d`uranium et le nitrure d`uranium

Energy Technology Data Exchange (ETDEWEB)

Lecraz, C

1993-06-11

A new type of combustible elements which is a mixture of uranium nitride and uranium-plutonium oxide could be used for Quick Neutrons Reactors. Three different studies have been made on the one hand on the reactions between uranium nitride (UN) and uranium-plutonium mixed oxide (U,Pu)O{sub 2}, on the other hand on these between UN and uranium oxide UO{sub 2}. They show a sizeable reaction between nitride and oxide for the studied temperatures range (1573 K to 1973 K). This reaction forms a oxynitride compound, MO{sub x} N{sub y} with M=U or M=(U,Pu), whose crystalline structure is similar to oxide`s. Solubility of nitride in both oxides is studied, as the reaction kinetics. (TEC). 32 refs., 48 figs., 22 tabs.

Uranium rich granite and uranium productive granite in south China

Energy Technology Data Exchange (ETDEWEB)

Mingyue, Feng; Debao, He [CNNC Key Laboratory of Uranium Resource Exploration and Evaluation Technology, Beijing Research Institute of Uranium Geology (China)

2012-07-15

The paper briefly introduces the differences between uranium rich granite and uranium productive granite in the 5 provinces of South China, and discusses their main characteristics in 4 aspects, the uranium productive granite is highly developed in fracture, very strong in alteration, often occurred as two-mica granite and regularly developed with intermediate-basic and acid dikes. The above characteristics distinguish the uranium productive granite from the uranium rich granite. (authors)

Uranium rich granite and uranium productive granite in south China

International Nuclear Information System (INIS)

Feng Mingyue; He Debao

2012-01-01

The paper briefly introduces the differences between uranium rich granite and uranium productive granite in the 5 provinces of South China, and discusses their main characteristics in 4 aspects, the uranium productive granite is highly developed in fracture, very strong in alteration, often occurred as two-mica granite and regularly developed with intermediate-basic and acid dikes. The above characteristics distinguish the uranium productive granite from the uranium rich granite. (authors)

Uranium industry annual 1996

International Nuclear Information System (INIS)

1997-04-01

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs

Uranium industry annual 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-04-01

The Uranium Industry Annual 1996 (UIA 1996) provides current statistical data on the US uranium industry`s activities relating to uranium raw materials and uranium marketing. The UIA 1996 is prepared for use by the Congress, Federal and State agencies, the uranium and nuclear electric utility industries, and the public. Data on uranium raw materials activities for 1987 through 1996 including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2006, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, uranium imports and exports, and uranium inventories are shown in Chapter 2. A feature article, The Role of Thorium in Nuclear Energy, is included. 24 figs., 56 tabs.

Uranium production and environmental restoration at Priargunsky Centre (Russian Federation)

International Nuclear Information System (INIS)

Shatalov, V.V.; Boitsov, A.V.; Nikolsky, A.L.; Chernigov, V.G.; Ovseichuk, V.A.

2002-01-01

The state enterprise 'Priargunsky Mining and Chemical Production Association' (PPGHO) is the only active uranium production centre in Russia in last decade. Mining has been operated since 1968 by two open pits and four underground mines. It is based on resources of 19 volcanic-type deposits of Streltsovsk U-ore region situated at the area of 150 km 2 . Milling and processing has been carried out since 1974 at the local hydrometallurgical plant. Since the mid 1980s, limited amount of uranium is produced by heap and block leaching methods. High level of total production marks PPGHO as one of the outstanding uranium production centers worldwide. Significant amount of solid, liquid and gas wastes have been generated for more than 30 years. The principal environmental contamination comes from waste rock piles, mine water and tailing ponds. Liquid waste seepage through tailing pond bed can essentially contaminate underground waters. The principal environmental remediation activities are: waste rock dumps and open pits rehabilitation; waste rock utilization for industrial needs; heap and block leaching mining development, strengthening dam bodies and construction intercepting wells below the tailing pond dam, hydrogeological monitoring, upgrade of mine water treatment unit. Waste is being managed by the environmental service team of PPGHO. Environmental restoration activities, including rehabilitation of the territories and waste utilization, are implemented gradually in line with decommissioning of enterprise's particular facilities. (author)

Production of sized particles of uranium oxides and uranium oxyfluorides

International Nuclear Information System (INIS)

Knudsen, I.E.; Randall, C.C.

1976-01-01

A process is claimed for converting uranium hexafluoride (UF 6 ) to uranium dioxide (UO 2 ) of a relatively large particle size in a fluidized bed reactor by mixing uranium hexafluoride with a mixture of steam and hydrogen and by preliminary reacting in an ejector gaseous uranium hexafluoride with steam and hydrogen to form a mixture of uranium and oxide and uranium oxyfluoride seed particles of varying sizes, separating the larger particles from the smaller particles in a cyclone separator, recycling the smaller seed particles through the ejector to increase their size, and introducing the larger seed particles from the cyclone separator into a fluidized bed reactor where the seed particles serve as nuclei on which coarser particles of uranium dioxide are formed. 9 claims, 2 drawing figures

Uranium 2000 : International symposium on the process metallurgy of uranium

International Nuclear Information System (INIS)

Ozberk, E.; Oliver, A.J.

2000-01-01

The International Symposium on the Process Metallurgy of Uranium has been organized as the thirtieth annual meeting of the Hydrometallurgy Section of the Metallurgical Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM). This meeting is jointly organized with the Canadian Mineral Processors Division of CIM. The proceedings are a collection of papers from fifteen countries covering the latest research, development, industrial practices and regulatory issues in uranium processing, providing a concise description of the state of this industry. Topics include: uranium industry overview; current milling operations; in-situ uranium mines and processing plants; uranium recovery and further processing; uranium leaching; uranium operations effluent water treatment; tailings disposal, water treatment and decommissioning; mine decommissioning; and international regulations and decommissioning. (author)

Antenatal care strengthening for improved quality of care in Jimma, Ethiopia

DEFF Research Database (Denmark)

Villadsen, Sarah Fredsted; Negussie, Dereje; GebreMariam, Abebe

2015-01-01

and assess the implementation process and effectiveness on quality of ANC in Jimma, Ethiopia. METHODS: The intervention comprised trainings, supervisions, equipment, development of health education material, and adaption of guidelines. It was implemented at public facilities and control sites were included...... in the evaluation. Improved content of care (physical examinations, laboratory testing, tetanus toxoid (TT)-immunization, health education, conduct of health professionals, and waiting time) were defined as proximal project outcomes and increased quality of care (better identification of health problems....... The effect of the intervention was assessed by comparing the change in quality of care from before to after the intervention period at intervention sites, relative to control sites, using logistic mixed effect regression. RESULTS: The continued attention to the ANC provision during implementation stimulated...

Uranium Industry Annual, 1992

International Nuclear Information System (INIS)

1993-01-01

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ''Decommissioning of US Conventional Uranium Production Centers,'' is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2

Uranium Industry Annual, 1992

Energy Technology Data Exchange (ETDEWEB)

1993-10-28

The Uranium Industry Annual provides current statistical data on the US uranium industry for the Congress, Federal and State agencies, the uranium and electric utility industries, and the public. The feature article, ``Decommissioning of US Conventional Uranium Production Centers,`` is included. Data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2.

Depleted uranium

International Nuclear Information System (INIS)

Huffer, E.; Nifenecker, H.

2001-02-01

This document deals with the physical, chemical and radiological properties of the depleted uranium. What is the depleted uranium? Why do the military use depleted uranium and what are the risk for the health? (A.L.B.)

Pyrophoric behaviour of uranium hydride and uranium powders

Science.gov (United States)

Le Guyadec, F.; Génin, X.; Bayle, J. P.; Dugne, O.; Duhart-Barone, A.; Ablitzer, C.

2010-01-01

Thermal stability and spontaneous ignition conditions of uranium hydride and uranium metal fine powders have been studied and observed in an original and dedicated experimental device placed inside a glove box under flowing pure argon. Pure uranium hydride powder with low amount of oxide (Oxidation mechanisms are proposed.

RECOVERY OF URANIUM FROM ZIRCONIUM-URANIUM NUCLEAR FUELS

Science.gov (United States)

Gens, T.A.

1962-07-10

An improvement was made in a process of recovering uranium from a uranium-zirconium composition which was hydrochlorinated with gsseous hydrogen chloride at a temperature of from 350 to 800 deg C resulting in volatilization of the zirconium, as zirconium tetrachloride, and the formation of a uranium containing nitric acid insoluble residue. The improvement consists of reacting the nitric acid insoluble hydrochlorination residue with gaseous carbon tetrachloride at a temperature in the range 550 to 600 deg C, and thereafter recovering the resulting uranium chloride vapors. (AEC)

Techniques Currently Used in Uranium Prospecting in Canada

Energy Technology Data Exchange (ETDEWEB)

Little, H. W.; Smith, A. Y. [Geological Survey of Canada, Ottawa, Ont. (Canada)

1969-03-15

The sequence of existing practice in the search for uranium deposits in Canada begins with the establishment of a factual classification of types of uranium deposits and the criteria for recognition of the geological environment favourable to each type. The next step is the careful appraisal of geological maps and reports to determine regions and, more specifically, rock formations in which these criteria exist. Guidelines in the selection of such areas were given in a recent Geological Survey paper by S M. Roscoe. In most areas, once a favourable region or formation is selected, initial field investigation is preceded by an airborne scintillometer or airborne gamma-ray spectrometer survey. Detailed geological mapping is usually done, particularly by the larger companies, with special attention to the cause of anomalies. The form of geological studies is dependent on the type of uranium deposit, in the Elliot Lake area sedimentological studies comprise the mam guidelines in the search for ore whereas structural interpretation is the keynote in such areas as Uranium City. Detailed scintillometer grid surveys on the ground are used subsequently to pinpoint the targets to be surface trenched or diamond drilled. The drilling pattern is also governed by the type of deposit. Down-hole scintillometer probes are used to extrapolate data obtained by more costly chemical assays. Research is being conducted, both by private industry and by the Geological Survey of Canada, into improved design and sensitivity of airborne gamma-ray spectrometry, and airborne magnetometers. The Geological Survey is testing AFMAG equipment, and plans to cover the Uranium City area, where pitchblende-bearing veins are in or close to faults. Geochemical research is being undertaken on the behaviour of uranium ions, in stream sediments, in soils, and in surface waters, relative to their use in prospecting for uranium deposits. Recent analyses for radon in surface waters has shown a closer

Strategy for Strengthening Farmer Groups by Institutional Strengthening

Directory of Open Access Journals (Sweden)

Purbayu Budi Santoso

2015-08-01

Full Text Available Agriculture sector becomes a spotlight because this sector will be full of potential but the welfare of farmers who become the leading actor is not guaranteed and has a poor tendency. The purpose of this study is to formulate strategies to strengthen farmers' groups in order to create the marketing of the agricultural sector that benefit farmers. The method used to achieve this goal is to use a qualitative approach and Analytical Network Process. In addition to the secondary data obtained from several agencies, this study also uses primary data obtained by in-depth interviews and observations. This research results a priority of aspects of the institutional strengthening of farmer groups as well as priority issues and priorities of the solution of each aspect. In addition, the priority of alternative strategies resulted based on the problems and solutions that have been analyzed in order to solve the problems in the institutional strengthening of farmer groups in Demak.

Uranium prospecting; La prospection de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Roubault, M. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1955-07-01

This report is an instruction book for uranium prospecting. It appeals to private prospecting. As prospecting is now a scientific and technical research, it cannot be done without preliminary studies. First of all, general prospecting methods are given with a recall of fundamental geologic data and some general principles which are common with all type of prospecting. The peculiarities of uranium prospecting are also presented and in particular the radioactivity property of uranium as well as the special aspect of uranium ores and the aspect of neighbouring ores. In a third part, a description of the different uranium ores is given and separated in two different categories: primary and secondary ores, according to the place of transformation, deep or near the crust surface respectively. In the first category, the primary ores include pitchblende, thorianite and rare uranium oxides as euxenite and fergusonite for example. In the second category, the secondary ores contain autunite and chalcolite for example. An exhaustive presentation of the geiger-Mueller counter is given with the presentation of its different components, its functioning and utilization and its maintenance. The radioactivity interpretation method is showed as well as the elaboration of a topographic map of the measured radioactivity. A brief presentation of other detection methods than geiger-Mueller counters is given: the measurement of fluorescence and a chemical test using the fluorescence properties of uranium salts. Finally, the main characteristics of uranium deposits are discussed. (M.P.)

On the peculiarities of subsurface uranium concentrations in the arid regions

International Nuclear Information System (INIS)

Kochenov, A.V.; Chernikov, A.A.

1976-01-01

The general features of uranium distribution in the zone of hypergenesis of the area under investigation suggest a lack of accumulations due to climatic or landscape factors alone and formed at the expense of background near-clark contents of uranium in primary rocks. The low uranium concentrations in the debris layer of weathered crusts of acidic effusive rocks and granites as well as in salt marshes are of areal distribution and, in practice, never recorded as anomalies. The processes of salt formation in the area discussed appear, in the absence of organic matter in the sediments, to be insufficient by themselves for the accumulation of uranium from its near-clark contents in the primary rocks. At the same time the arid conditions are undoubtedly favorable for the formation and persistence of accumulative diffusion aureoles emphasizing and revealing on the surface the smallest and poorest primary concentrations of uranium. It is inadmissible to extrapolate the results of a study of one area to the entire variety of geomorphological conditions of the arid zone. The data reported show that care should be taken in interpreting uranium anomalies in arid areas, by all means taking account of the geological structure of the particular anomalous area and the uranium resources of the primary rocks

Uranium health physics

International Nuclear Information System (INIS)

1980-01-01

This report contains the papers delivered at the Summer School on Uranium Health Physics held in Pretoria on the 14 and 15 April 1980. The following topics were discussed: uranium producton in South Africa; radiation physics; internal dosimetry and radiotoxicity of long-lived uranium isotopes; uranium monitoring; operational experience on uranium monitoring; dosimetry and radiotoxicity of inhaled radon daughters; occupational limits for inhalation of radon-222, radon-220 and their short-lived daughters; radon monitoring techniques; radon daughter dosimeters; operational experience on radon monitoring; and uranium mill tailings management

Uranium supply and demand

Energy Technology Data Exchange (ETDEWEB)

Spriggs, M J

1976-01-01

Papers were presented on the pattern of uranium production in South Africa; Australian uranium--will it ever become available; North American uranium resources, policies, prospects, and pricing; economic and political environment of the uranium mining industry; alternative sources of uranium supply; whither North American demand for uranium; and uranium demand and security of supply--a consumer's point of view. (LK)

The strength of primary care in Europe

NARCIS (Netherlands)

Kringos, D.S.|info:eu-repo/dai/nl/352077131

2012-01-01

This thesis aimed to get insight into the elements that form (the strength of) primary care (PC) in Europe, their determinants and their impact on health care system outcomes. The results strengthen the evidence-base for policymakers to prioritise PC strengthening on the health policy agenda and

Strengthening health system to improve immunization for migrants in China.

Science.gov (United States)

Fang, Hai; Yang, Li; Zhang, Huyang; Li, Chenyang; Wen, Liankui; Sun, Li; Hanson, Kara; Meng, Qingyue

2017-07-01

Immunization is the most cost-effective method to prevent and control vaccine-preventable diseases. Migrant population in China has been rising rapidly, and their immunization status is poor. China has tried various strategies to strengthen its health system, which has significantly improved immunization for migrants. This study applied a qualitative retrospective review method aiming to collect, analyze and synthesize health system strengthening experiences and practices about improving immunizations for migrants in China. A conceptual framework of Theory of Change was used to extract the searched literatures. 11 searched literatures and 4 national laws and policies related to immunizations for migrant children were carefully studied. China mainly employed 3 health system strengthening strategies to significantly improve immunization for migrant population: stop charging immunization fees or immunization insurance, manage immunization certificates well, and pay extra attentions on immunization for special children including migrant children. These health system strengthening strategies were very effective, and searched literatures show that up-to-date and age-appropriate immunization rates were significantly improved for migrant children. Economic development led to higher migrant population in China, but immunization for migrants, particularly migrant children, were poor. Fortunately various health system strengthening strategies were employed to improve immunization for migrants in China and they were rather successful. The experiences and lessons of immunization for migrant population in China might be helpful for other developing countries with a large number of migrant population.

Uranium industry annual, 1991

International Nuclear Information System (INIS)

1992-10-01

In the Uranium Industry Annual 1991, data on uranium raw materials activities including exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment are presented in Chapter 1. Data on uranium marketing activities including domestic uranium purchases, commitments by utilities, procurement arrangements, uranium imports under purchase contracts and exports, deliveries to enrichment suppliers, inventories, secondary market activities, utility market requirements, and uranium for sale by domestic suppliers are presented in Chapter 2. A feature article entitled ''The Uranium Industry of the Commonwealth of Independent States'' is included in this report

Strengthening the role of Community Health Representatives in the Navajo Nation

Directory of Open Access Journals (Sweden)

Caroline King

2017-04-01

Full Text Available Abstract Background Strengthening Community Health Worker systems has been recognized to improve access to chronic disease prevention and management efforts in low-resource communities. The Community Outreach and Patient Empowerment (COPE Program is a Native non-profit organization with formal partnerships with both the Navajo Nation Community Health Representative (CHR Program and the clinical facilities serving the Navajo Nation. COPE works to better integrate CHRs into the local health care system through training, strengthening care coordination, and a standardized culturally appropriate suite of health promotion materials for CHRs to deliver to high-risk individuals in their homes. Methods The objective of this mixed methods, cross sectional evaluation of a longitudinal cohort study was to explore how the COPE Program has effected CHR teams over the past 6 years. COPE staff surveyed CHRs in concurrent years (2014 and 2015 about their perceptions of and experience working with COPE, including potential effects COPE may have had on communication among patients, CHRs, and hospital-based providers. COPE staff also conducted focus groups with all eight Navajo Nation CHR teams. Results CHRs and other stakeholders who viewed our results agree that COPE has improved clinic-community linkages, primarily through strengthened collaborations between Public Health Nurses and CHRs, and access to the Electronic Health Records. CHRs perceived that COPE’s programmatic support has strengthened their validity and reputation with providers and clients, and has enhanced their ability to positively effect health outcomes among their clients. CHRs report an improved ability to deliver health coaching to their clients. Survey results show that 80.2% of CHRs feel strongly positive that COPE trainings are useful, while 44.6% of CHRs felt that communication and teamwork had improved because of COPE. Conclusions These findings suggest that CHRs have experienced

Uranium price reporting systems

International Nuclear Information System (INIS)

1987-09-01

This report describes the systems for uranium price reporting currently available to the uranium industry. The report restricts itself to prices for U 3 O 8 natural uranium concentrates. Most purchases of natural uranium by utilities, and sales by producers, are conducted in this form. The bulk of uranium in electricity generation is enriched before use, and is converted to uranium hexafluoride, UF 6 , prior to enrichment. Some uranium is traded as UF 6 or as enriched uranium, particularly in the 'secondary' market. Prices for UF 6 and enriched uranium are not considered directly in this report. However, where transactions in UF 6 influence the reported price of U 3 O 8 this influence is taken into account. Unless otherwise indicated, the terms uranium and natural uranium used here refer exclusively to U 3 O 8 . (author)

Operating experience in processing of differently sourced deeply depleted uranium oxide and production of deeply depleted uranium metal ingots

International Nuclear Information System (INIS)

Manna, S.; Ladola, Y.S.; Sharma, S.; Chowdhury, S.; Satpati, S.K.; Roy, S.B.

2009-01-01

Uranium Metal Plant (UMP) of BARC had first time experience on production of three Depleted Uranium Metal (DUM) ingots of 76kg, 152kg and 163kg during March 1991. These ingots were produced by processing depleted uranyl nitrate solution produced at Plutonium Plant (PP), Trombay. In recent past Uranium Metal Plant (UMP), Uranium Extraction Division (UED), has been assigned to produce tonnage quantity of Deeply DUM (DDUM) from its oxide obtained from PP, PREFRE and RMP, BARC. This is required for shielding the high radioactive source of BHABHATRON Tele-cobalt machine, which is used for cancer therapy. The experience obtained in processing of various DDU oxides is being utilized for design of large scale DDU-metal plant under XIth plan project. The physico- chemical characteristics like morphology, density, flowability, reactivity, particle size distribution, which are having direct effect on reactivity of the powders of the DDU oxide powder, were studied and the shop-floor operational experience in processing of different oxide powder were obtained and recorded. During campaign trials utmost care was taken to standardized all operating conditions using the same equipment which are in use for natural uranium materials processing including safety aspects both with respect to radiological safety and industrial safety. Necessary attention and close monitoring were specially arranged and maintained for the safety aspects during the trial period. In-house developed pneumatic transport system was used for powder transfer and suitable dust arresting system was used for reduction of powder carry over

Formation mechanism of uranium minerals at sandstone-type uranium deposits

International Nuclear Information System (INIS)

Li Shengfu; Zhang Yun

2004-01-01

By analyzing the behavior and existence form of uranium in different geochemical environments, existence form of uranium and uranium minerals species, this paper expounds the formation mechanism of main commercial uranium mineral--pitchblende: (1) uranium is a valence-changeable element. It is reactivated and migrates in oxidized environment, and is reduced and precipitated in reducing environment; (2) [UO 2 (CO 3 ) 3 ] 4- , [UO 2 (CO 3 ) 2 ] 2- coming from oxidized environment react with reductants such as organic matter, sulfide and low-valence iron at the redox front to form simple uranium oxide--pitchblende; (3)the adsorption of uranium by organic matter and clay minerals accelerates the reduction and the concentration of uranium. Therefore, it is considered, that the reduction of SO 4 2- by organic matter to form H 2 S, and the reduction of UO 2 2+ by H 2 S are the main reasons for the formation of pitchblende. This reaction is extensively and universally available in neutral and weakly alkaline carbonate solution. The existense of reductants such as H 2 S is the basic factor leading to the decrease of Eh in environments and the oversaturation of UO 2 2+ at the redox front in groundwater, thus accelerating the adsorption and the precipitation of uranium

Uranium enrichment

International Nuclear Information System (INIS)

1990-01-01

This report looks at the following issues: How much Soviet uranium ore and enriched uranium are imported into the United States and what is the extent to which utilities flag swap to disguise these purchases? What are the U.S.S.R.'s enriched uranium trading practices? To what extent are utilities required to return used fuel to the Soviet Union as part of the enriched uranium sales agreement? Why have U.S. utilities ended their contracts to buy enrichment services from DOE?

Australian uranium industry

Energy Technology Data Exchange (ETDEWEB)

Warner, R K

1976-04-01

Various aspects of the Australian uranium industry are discussed including the prospecting, exploration and mining of uranium ores, world supply and demand, the price of uranium and the nuclear fuel cycle. The market for uranium and the future development of the industry are described.

Uranium enrichment plans

International Nuclear Information System (INIS)

Thomas, D.C.; Gagne, R.W.

1978-01-01

The following topics are covered: the status of the Government's existing uranium enrichment services contracts, natural uranium requirements based on the latest contract information, uncertainty in predicting natural uranium requirements based on uranium enrichment contracts, and domestic and foreign demand assumed in enrichment planning

Uranium of Kazakhstan

International Nuclear Information System (INIS)

Tsalyuk, Yu.; Gurevich, D.

2000-01-01

Over 25 % of the world's uranium reserves are concentrated in Kazakhstan. So, the world's largest Shu-Sarysu uranium province is situated on southern Kazakhstan, with resources exceeding 1 billion tonnes of uranium. No less, than 3 unique deposits with resources exceeding 100,000 tonnes are situated here. From the economic point of view the most important thing is that these deposits are suitable for in-situ leaching, which is the cheapest, environmentally friendly and most efficient method available for uranium extracting. In 1997 the Kazatomprom National Joint-Stock Company united all Kazakhstan's uranium enterprises (3 mine and concentrating plants, Volkovgeologiya Joint-Stock Company and the Ulbinskij Metallurgical plant). In 1998 uranium production came to 1,500 tonnes (860 kg in 1997). In 1999 investment to the industry were about $ 30 million. Plans for development of Kazakhstan's uranium industry provide a significant role for foreign partners. At present, 2 large companies (Comeco (Canada), Cogema (France) working in Kazakhstan. Kazakatomprom continues to attract foreign investors. The company's administration announced that in that in next year they have plan to make a radical step: to sell 67 % of stocks to strategic investors (at present 100 % of stocks belongs to state). Authors of the article regard, that the Kazakhstan's uranium industry still has significant reserves to develop. Even if the scenario for the uranium industry could be unfavorable, uranium production in Kazakhstan may triple within the next three to four years. The processing of uranium by the Ulbinskij Metallurgical Plant and the production of some by-products, such as rhenium, vanadium and rare-earth elements, may provide more profits. Obviously, the sale of uranium (as well as of any other reserves) cannot make Kazakhstan a prosperous country. However, country's uranium industry has a god chance to become one of the most important and advanced sectors of national economy

Uranium enrichment plans

International Nuclear Information System (INIS)

Gagne, R.W.; Thomas, D.C.

1977-01-01

The status of existing uranium enrichment contracts in the US is reviewed and expected natural uranium requirements for existing domestic uranium enrichment contracts are evaluated. Uncertainty in natural uranium requirements associated with requirements-type and fixed-commitment type contracts is discussed along with implementation of variable tails assay

Uranium speciation in plants

International Nuclear Information System (INIS)

Guenther, A.; Bernhard, G.; Geipel, G.; Reich, T.; Rossberg, A.; Nitsche, H.

2003-01-01

Detailed knowledge of the nature of uranium complexes formed after the uptake by plants is an essential prerequisite to describe the migration behavior of uranium in the environment. This study focuses on the determination of uranium speciation after uptake of uranium by lupine plants. For the first time, time-resolved laser-induced fluorescence spectroscopy and X-ray absorption spectroscopy were used to determine the chemical speciation of uranium in plants. Differences were detected between the uranium speciation in the initial solution (hydroponic solution and pore water of soil) and inside the lupine plants. The oxidation state of uranium did not change and remained hexavalent after it was taken up by the lupine plants. The chemical speciation of uranium was identical in the roots, shoot axis, and leaves and was independent of the uranium speciation in the uptake solution. The results indicate that the uranium is predominantly bound as uranyl(VI) phosphate to the phosphoryl groups. Dandelions and lamb's lettuce showed uranium speciation identical to lupine plants. (orig.)

Uranium recovering from slags generated in the metallic uranium by magnesiothermic reduction

International Nuclear Information System (INIS)

Fornarolo, F.; Carvalho, E.F. Urano de; Durazzo, M.; Riella, H.G.

2008-01-01

The Nuclear Fuel Center of IPEN/CNEN-SP has recent/y concluded a program for developing the fabrication technology of the nuclear fuel based on the U 3 Si 2 -Al dispersion, which is being used in the IEA-R1 research reactor. The uranium silicide (U 3 Si 2 ) fuel production starts with the uranium hexafluoride (UF 6 ) processing and uranium tetrafluoride (UF 4 ) precipitation. Then, the UF 4 is converted to metallic uranium by magnesiothermic reduction. The UF 4 reduction by magnesium generates MgF 2 slag containing considerable concentrations of uranium, which could reach 20 wt%. The uranium contained in that slag should be recovered and this work presents the results obtained in recovering the uranium from that slag. The uranium recovery is accomplished by acidic leaching of the calcined slag. The calcination transforms the metallic uranium in U 3 O 8 , promoting the pulverization of the pieces of metallic uranium and facilitating the leaching operation. As process variables, have been considered the nitric molar concentration, the acid excess regarding the stoichiometry and the leaching temperature. As result, the uranium recovery reached a 96% yield. (author)

Process for producing uranium oxide rich compositions from uranium hexafluoride

International Nuclear Information System (INIS)

DeHollander, W.R.; Fenimore, C.P.

1978-01-01

Conversion of gaseous uranium hexafluoride to a uranium dioxide rich composition in the presence of an active flame in a reactor defining a reaction zone is achieved by separately introducing a first gaseous reactant comprising a mixture of uranium hexafluoride and a reducing carrier gas, and a second gaseous reactant comprising an oxygen-containing gas. The reactants are separated by a shielding gas as they are introduced to the reaction zone. The shielding gas temporarily separates the gaseous reactants and temporarily prevents substantial mixing and reacting of the gaseous reactants. The flame occurring in the reaction zone is maintained away from contact with the inlet introducing the mixture to the reaction zone. After suitable treatment, the uranium dioxide rich composition is capable of being fabricated into bodies of desired configuration for loading into nuclear fuel rods. Alternatively, an oxygen-containing gas as a third gaseous reactant is introduced when the uranium hexafluoride conversion to the uranium dioxide rich composition is substantially complete. This results in oxidizing the uranium dioxide rich composition to a higher oxide of uranium with conversion of any residual reducing gas to its oxidized form

Formation conditions of uranium minerals in oxidation zone of uranium deposits

International Nuclear Information System (INIS)

Li Youzhu

2005-01-01

The paper concerns about the summary and classification of hydrothermal uranium deposit with oxidation zone. Based on the summary of observation results of forty uranium deposits located in CIS and Bulgaria which are of different sizes and industrial-genetic types, analysis on available published information concerning oxidation and uranium mineral enrichment in supergenic zone, oxidation zone classification of hydrothermal uranium had been put forward according to the general system of the exogenetic uranium concentration. (authors)

Research on geochronology and uranium source of sandstone-hosted uranium ore-formation in major uranium-productive basins, Northern-China

International Nuclear Information System (INIS)

Xia Yuliang; Liu Hanbin; Lin Jinrong; Fan Guang; Hou Yanxian

2004-12-01

A method is developed for correcting uranium content in uranium ore samples by considering the U-Ra equilibrium coefficient, then a U-Pb isochron is drawn up. By performing the above correction ore-formation ages of sandstone-hosted uranium mineralization which may be more realistic have been obtained. The comparative research on U-Pb isotopic ages of detritic zircon in ore-hosting sandstone and zircon in intermediate-acid igneous rocks in corresponding provenance area indicates that the ore-hosting sandstone is originated from the erosion of intermediate-acid igneous rocks and the latters are the material basis for the formation of the uranium-rich sandstone beds. On the basis of the study on U-Pb isotopic system evolution of the provenance rocks and sandstones from ore-hosting series, it is verified that the uranium sources of the sandstone-hosted uranium deposit are: the intermediate-acid igneous rocks with high content of mobile uranium, and the sandstone bodies pre-concentrated uranium. (authors)

Control of uranium hazards - Portsmouth uranium enrichment plant

International Nuclear Information System (INIS)

Wagner, E.R.

1985-01-01

This report summarizes the Environmental, Safety and Health programs to control uranium hazards at the Portsmouth Gaseous Diffusion Plant. A description of the physical plant, the facility processes and the attendant uranium flows and effluents are provided. The hazards of uranium are discussed and the control systems are outlined. Finally, the monitoring programs are described and summaries of recent data are provided. 11 figs., 20 tabs

Beyond an energy deal: Impacts of the Sino-Australia uranium agreement

International Nuclear Information System (INIS)

Wu Jiaping; Garnett, Stephen T.; Barnes, Tony

2008-01-01

Is the spectacular growth of Sino-Australian trade compelling Australian policy-makers to strengthen strategic support for China in the face of traditional alliances? The recently signed trade agreement under which Australia will annually export 20,000 tonnes of uranium to China for power generation for the next 20 years, will feed China's increased energy demand, allow a reduction in dependence on coal-based energy and ameliorate environmental deterioration, all matters that have become critical to China's economic growth. Yet the uranium trade will contribute only slightly to China's energy needs, and to the Australian economy. However, the trade deal was signed even though China, as a nuclear military power, is a potential threat to Australia's strongest military ally, the US. At the same time it reignited a divisive debate in Australia, covering a wide range of political, social, economic, health and environmental policy areas that reach well beyond strategic relationships. That the Australian Government will risk both internal and external criticism seems to be further recognition that Australia is becoming increasingly dependent on the continued growth of China's economy for its prosperity

Uranium industry annual, 1986

International Nuclear Information System (INIS)

1987-01-01

Uranium industry data collected in the EIA-858 survey provide a comprehensive statistical characterization of annual activities of the industry and include some information about industry plans over the next several years. This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities utility market requirements and related topics

Uranium Industry. Annual 1984

International Nuclear Information System (INIS)

Lawrence, M.S.S.

1985-01-01

This report provides a statistical description of activities of the US uranium industry during 1984 and includes a statistical profile of the status of the industry at the end of 1984. It is based on the results of an Energy Information Administration (EIA) survey entitled ''Uranium Industry Annual Survey'' (Form EIA-858). The principal findings of the survey are summarized under two headings - Uranium Raw Materials Activities and Uranium Marketing Activities. The first heading covers exploration and development, uranium resources, mine and mill production, and employment. The second heading covers uranium deliveries and delivery commitments, uranium prices, foreign trade in uranium, inventories, and other marketing activities. 32 figs., 48 tabs

Irradiated uranium reprocessing

International Nuclear Information System (INIS)

Gal, I.

1961-12-01

Task concerned with reprocessing of irradiated uranium covered the following activities: implementing the method and constructing the cell for uranium dissolving; implementing the procedure for extraction of uranium, plutonium and fission products from radioactive uranium solutions; studying the possibilities for using inorganic ion exchangers and adsorbers for separation of U, Pu and fission products

Uranium

International Nuclear Information System (INIS)

Anon.

1984-01-01

The article briefly discusses the Australian government policy and the attitude of political party factions towards the mining and exporting of the uranium resources in Australia. Australia has a third of the Western World's low-cost uranium resources

Laboratory equipment maintenance: a critical bottleneck for strengthening health systems in sub-Saharan Africa?

Science.gov (United States)

Fonjungo, Peter N; Kebede, Yenew; Messele, Tsehaynesh; Ayana, Gonfa; Tibesso, Gudeta; Abebe, Almaz; Nkengasong, John N; Kenyon, Thomas

2012-02-01

Properly functioning laboratory equipment is a critical component for strengthening health systems in developing countries. The laboratory can be an entry point to improve population health and care of individuals for targeted diseases - prevention, care, and treatment of TB, HIV/AIDS, and malaria, plus maternal and neonatal health - as well as those lacking specific attention and funding. We review the benefits and persistent challenges associated with sustaining laboratory equipment maintenance. We propose equipment management policies as well as a comprehensive equipment maintenance strategy that would involve equipment manufacturers and strengthen local capacity through pre-service training of biomedical engineers. Strong country leadership and commitment are needed to assure development and sustained implementation of policies and strategies for standardization of equipment, and regulation of its procurement, donation, disposal, and replacement.

Uranium industry annual 1998

International Nuclear Information System (INIS)

1999-01-01

The Uranium Industry Annual 1998 (UIA 1998) provides current statistical data on the US uranium industry's activities relating to uranium raw materials and uranium marketing. It contains data for the period 1989 through 2008 as collected on the Form EIA-858, ''Uranium Industry Annual Survey.'' Data provides a comprehensive statistical characterization of the industry's activities for the survey year and also include some information about industry's plans and commitments for the near-term future. Data on uranium raw materials activities for 1989 through 1998, including exploration activities and expenditures, EIA-estimated reserves, mine production of uranium, production of uranium concentrate, and industry employment, are presented in Chapter 1. Data on uranium marketing activities for 1994 through 2008, including purchases of uranium and enrichment services, enrichment feed deliveries, uranium fuel assemblies, filled and unfilled market requirements, and uranium inventories, are shown in Chapter 2. The methodology used in the 1998 survey, including data edit and analysis, is described in Appendix A. The methodologies for estimation of resources and reserves are described in Appendix B. A list of respondents to the ''Uranium Industry Annual Survey'' is provided in Appendix C. The Form EIA-858 ''Uranium Industry Annual Survey'' is shown in Appendix D. For the readers convenience, metric versions of selected tables from Chapters 1 and 2 are presented in Appendix E along with the standard conversion factors used. A glossary of technical terms is at the end of the report. 24 figs., 56 tabs

Preparation of uranium-230 as a new uranium tracer

International Nuclear Information System (INIS)

Hashimoto, T.; Kido, K.; Sotobayashi, T.

1977-01-01

A uranium isotope, 230 U(T=20.8 d), was produced from the 231 Pa(γ,n) 230 Pa→viaβ - decay 230 U process with a bremsstrahlung irradiation on a protactinium target. After standing for about one month to obtain a maximal growth of 230 U, the uranium was chemically purified, applying an ion-exchange method. The purity of the 230 U obtained was examined with alpha spectrometry and an intrinsic alpha peak due to 230 U as a new uranium tracer in an alpha spectrometric analysis of uranium isotopes is described. (author)

Synthesis of Uranium nitride powders using metal uranium powders

International Nuclear Information System (INIS)

Yang, Jae Ho; Kim, Dong Joo; Oh, Jang Soo; Rhee, Young Woo; Kim, Jong Hun; Kim, Keon Sik

2012-01-01

Uranium nitride (UN) is a potential fuel material for advanced nuclear reactors because of their high fuel density, high thermal conductivity, high melting temperature, and considerable breeding capability in LWRs. Uranium nitride powders can be fabricated by a carbothermic reduction of the oxide powders, or the nitriding of metal uranium. The carbothermic reduction has an advantage in the production of fine powders. However it has many drawbacks such as an inevitable engagement of impurities, process burden, and difficulties in reusing of expensive N 15 gas. Manufacturing concerns issued in the carbothermic reduction process can be solved by changing the starting materials from oxide powder to metals. However, in nitriding process of metal, it is difficult to obtain fine nitride powders because metal uranium is usually fabricated in the form of bulk ingots. In this study, a simple reaction method was tested to fabricate uranium nitride powders directly from uranium metal powders. We fabricated uranium metal spherical powder and flake using a centrifugal atomization method. The nitride powders were obtained by thermal treating those metal particles under nitrogen containing gas. We investigated the phase and morphology evolutions of powders during the nitriding process. A phase analysis of nitride powders was also a part of the present work

Child survival in England: Strengthening governance for health.

Science.gov (United States)

Wolfe, Ingrid; Mandeville, Kate; Harrison, Katherine; Lingam, Raghu

2017-11-01

The United Kingdom, like all European countries, is struggling to strengthen health systems and improve conditions for child health and survival. Child mortality in the UK has failed to improve in line with other countries. Securing optimal conditions for child health requires a healthy society, strong health system, and effective health care. We examine inter-sectoral and intra-sectoral policy and governance for child health and survival in England. Literature reviews and universally applicable clinical scenarios were used to examine child health problems and English policy and governance responses for improving child health through integrating care and strengthening health systems, over the past 15 years. We applied the TAPIC framework for analysing policy governance: transparency, accountability, participation, integrity, and capacity. We identified strengths and weaknesses in child health governance in all the five domains. However there remain policy failures that are not fully explained by the TAPIC framework. Other problems with successfully translating policy to improved health that we identified include policy flux; policies insufficiently supported by delivery mechanisms, measurable targets, and sufficient budgets; and policies with unintended or contradictory aspects. We make recommendations for inter-sectoral and intra-sectoral child health governance, policy, and action to improve child health in England with relevant lessons for other countries. Copyright © 2017 The Author(s). Published by Elsevier B.V. All rights reserved.

Uranium market

International Nuclear Information System (INIS)

Rubini, L.A.; Asem, M.A.D.

1990-01-01

The historical development of the uranium market is present in two periods: The initial period 1947-1970 and from 1970 onwards, with the establishment of a commercial market. The world uranium requirements are derived from the corresponding forecast of nuclear generating capacity, with, particular emphasis to the brazilian requirements. The forecast of uranium production until the year 2000 is presented considering existing inventories and the already committed demand. The balance between production and requirements is analysed. Finally the types of contracts currently being used and the development of uranium prices in the world market are considered. (author)

Feasibility study of the single particle analysis of uranium by laser ionization time-of-flight mass spectrometry

International Nuclear Information System (INIS)

Ha, Yeong Keong; Han, Sun Ho; Pyo, Hyung Yeol; Park, Yong Joon; Song, Kyu Seok

2004-01-01

The control of activities in nuclear facilities worldwide is one of the most important tasks of nuclear safeguard. To meet the needs for nuclear safeguard, International Atomic Energy Agency (IAEA) strengthened the control of nuclear activities to detect these activities earlier. Thus, it is very important to develop analytical techniques to determine the isotopic composition of hot particles from swipe samples. The precise measurement of the 234 U/ 238 U, 235 U/ 238 U and 236 U/ 238 U ratios is important because it provides information about the initial enrichment of reactor uranium, core history, and post accident story. Because conventional α-spectrometry is not sufficiently sensitive for the determination of long-lived radionuclides in environmental samples, several analytical techniques, such as SNMS (Sputtered Neutral Mass Spectrometry), RIMS (Resonance Ionization Mass Spectrometry), AMS (Accelerator Mass Spectrometry) etc., have been proposed for uranium isotope measurements. In case of microparticles, analytical techniques such as SIMS (Secondary Ion Mass Spectrometry) have been applied for the isotopic characterization. The aim of this work was the development of a sensitive analytical technique for determination of isotopic ratio of uranium in swipe samples. In this work, feasibility of LIMS (Laser Ionization Mass Spectrometry) for the determination of such particles has been evaluated using a reference material of natural uranium

Uranium

International Nuclear Information System (INIS)

Whillans, R.T.

1981-01-01

Events in the Canadian uranium industry during 1980 are reviewed. Mine and mill expansions and exploration activity are described, as well as changes in governmental policy. Although demand for uranium is weak at the moment, the industry feels optimistic about the future. (LL)

Strengthening and expanding the capacity of health worker education in Zambia.

Science.gov (United States)

Michelo, Charles; Zulu, Joseph Mumba; Simuyemba, Moses; Andrews, Benjamin; Katubulushi, Max; Chi, Benjamin; Njelesani, Evariste; Vwalika, Bellington; Bowa, Kasonde; Maimbolwa, Margaret; Chipeta, James; Goma, Fastone; Nzala, Selestine; Banda, Sekelani; Mudenda, John; Ahmed, Yusuf; Hachambwa, Lotti; Wilson, Craig; Vermund, Sten; Mulla, Yakub

2017-01-01

Zambia is facing a chronic shortage of health care workers. The paper aimed at understanding how the Medical Education Partnership Initiative (MEPI) program facilitated strengthening and expanding of the national capacity and quality of medical education as well as processes for retaining faculty in Zambia. Data generated through documentary review, key informant interviews and observations were analyzed using a thematic approach. The MEPI program triggered the development of new postgraduate programs thereby increasing student enrollment. This was achieved by leveraging of existing and new partnerships with other universities and differentiating the old Master in Public Health into specialized curriculum. Furthermore, the MEPI program improved the capacity and quality of training by facilitating installation and integration of new technology such as the eGranary digital library, E-learning methods and clinical skills laboratory into the Schools. This technology enabled easy access to relevant data or information, quicker turn around of experiments and enhanced data recording, display and analysis features for experiments. The program also facilitated transforming of the academic environment into a more conducive work place through strengthening the Staff Development program and support towards research activities. These activities stimulated work motivation and interest in research by faculty. Meanwhile, these processes were inhibited by the inability to upload all courses on to Moodle as well as inadequate operating procedures and feedback mechanisms for the Moodle. Expansion and improvement in training processes for health care workers requires targeted investment within medical institutions and strengthening local and international partnerships.

Uranium industry annual 1985

International Nuclear Information System (INIS)

1986-11-01

This report consists of two major sections. The first addresses uranium raw materials activities and covers the following topics: exploration activities and expenditures, resources and reserves, mine production of uranium, production of uranium concentrate, and industry employment. The second major section is concerned with the following uranium marketing activities: uranium purchase commitments, uranium prices, procurement arrangements, uranium imports and exports, enrichment services, inventories, secondary market activities, utility market requirements, and related topics. A glossary and appendices are included to assist the reader in interpreting the substantial array of statistical data in this report and to provide background information about the survey

Uranium

Energy Technology Data Exchange (ETDEWEB)

Williams, R M

1976-01-01

Evidence of expanding markets, improved prices and the short supply of uranium became abundantly clear in 1975, providing the much needed impetus for widespread activity in all phases of uranium operations. Exploration activity that had been at low levels in recent years in Canada was evident in most provinces as well as the Northwest Territories. All producers were in the process of expanding their uranium-producing facilities. Canada's Atomic Energy Control Board (AECB) by year-end had authorized the export of over 73,000 tons of U/sub 3/0/sub 8/ all since September 1974, when the federal government announced its new uranium export guidelines. World production, which had been in the order of 25,000 tons of U/sub 3/0/sub 8/ annually, was expected to reach about 28,000 tons in 1975, principally from increased output in the United States.

Chapter 1. General information about uranium. 1.3. Uranium ores

International Nuclear Information System (INIS)

Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.

2012-01-01

The uranium ores were described. It was found that uranium ores and natural mineral formations containing uranium and its compounds, can be found in concentrations that are technically possible for industrial utilization and which are economically profitable. It was defined that oxidation levels of uranium minerals have an impact on their reprocessing technology and behavior in hydrometallurgical re partition. It was found that the chemical composition of ores has a decisive importance during selection of their reprocessing method.

Uranium production in thorium/denatured uranium fueled PWRs

International Nuclear Information System (INIS)

Arthur, W.B.

1977-01-01

Uranium-232 buildup in a thorium/denatured uranium fueled pressurized water reactor, PWR(Th), was studied using a modified version of the spectrum-dependent zero dimensional depletion code, LEOPARD. The generic Combustion Engineering System 80 reactor design was selected as the reactor model for the calculations. Reactors fueled with either enriched natural uranium and self-generated recycled uranium or uranium from a thorium breeder and self-generated recycled uranium were considered. For enriched natural uranium, concentrations of 232 U varied from about 135 ppM ( 232 U/U weight basis) in the zeroth generation to about 260 ppM ( 232 U/U weight basis) at the end of the fifth generation. For the case in which thorium breeder fuel (with its relatively high 232 U concentration) was used as reactor makeup fuel, concentrations of 232 U varied from 441 ppM ( 232 U/U weight basis) at discharge from the first generation to about 512 ppM ( 232 U/U weight basis) at the end of the fifth generation. Concentrations in freshly fabricated fuel for this later case were 20 to 35% higher than the discharge concentration. These concentrations are low when compared to those of other thorium fueled reactor types (HTGR and MSBR) because of the relatively high 238 U concentration added to the fuel as a denaturant. Excellent agreement was found between calculated and existing experimental values. Nevertheless, caution is urged in the use of these values because experimental results are very limited, and the relevant nuclear data, especially for 231 Pa and 232 U, are not of high quality

Derived enriched uranium market

International Nuclear Information System (INIS)

Rutkowski, E.

1996-01-01

The potential impact on the uranium market of highly enriched uranium from nuclear weapons dismantling in the Russian Federation and the USA is analyzed. Uranium supply, conversion, and enrichment factors are outlined for each country; inventories are also listed. The enrichment component and conversion components are expected to cause little disruption to uranium markets. The uranium component of Russian derived enriched uranium hexafluoride is unresolved; US legislation places constraints on its introduction into the US market

Uranium in Canada

International Nuclear Information System (INIS)

1985-09-01

In 1974 the Minister of Energy, Mines and Resources (EMR) established a Uranium Resource Appraisal Group (URAG) within EMR to audit annually Canada's uranium resources for the purpose of implementing the federal government's uranium export policy. A major objective of this policy was to ensure that Canadian uranium supplies would be sufficient to meet the needs of Canada's nuclear power program. As projections of installed nuclear power growth in Canada over the long term have been successively revised downwards (the concern about domestic security of supply is less relevant now than it was 10 years ago) and as Canadian uranium supply capabilities have expanded significantly. Canada has maintained its status as the western world's leading exporter of uranium and has become the world's leading producer. Domestic uranium resource estimates have increased to 551 000 tonnes U recoverable from mineable ore since URAG completed its last formal assessment (1982). In 1984, Canada's five primary uranium producers employed some 5800 people at their mining and milling operations, and produced concentrates containing some 11 170 tU. It is evident from URAG's 1984 assessment that Canada's known uranium resources, recoverable at uranium prices of $150/kg U or less, are more than sufficient to meet the 30-year fuelling requirements of those reactors that are either in opertaion now or committed or expected to be in-service by 1995. A substantial portion of Canada's identified uranium resources, recoverable within the same price range, is thus surplus to Canadian needs and available for export. Sales worth close to $1 billion annually are assured. Uranium exploration expenditures in Canada in 1983 and 1984 were an estimated $41 million and $35 million, respectively, down markedly from the $128 million reported for 1980. Exploration drilling and surface development drilling in 1983 and 1984 were reported to be 153 000 m and 197 000 m, respectively, some 85% of which was in

Research on deeply purifying effluent from uranium mining and metallurgy to remove uranium by ion exchange. Pt.2: Elution uranium from lower loaded uranium resin by the intense fractionation process

International Nuclear Information System (INIS)

Zhang Jianguo; Chen Shaoqiang; Qi Jing

2002-01-01

Developing macroporous resin for purifying uranium effluent from uranium mining and metallurgy is presented. The Intense Fractionation Process is employed to elute uranium from lower loaded uranium resin by the eluent of sulfuric acid and ammonium sulfate. The result is indicated that the uranium concentration in the rich elutriant is greatly increased, and the rich liquor is only one bed column volume, uranium concentration in the elutriant is increased two times which concentration is 10.1 g/L. The eluent is saved about 50% compared with the conventional fixed bed elution operation. And also the acidity in the rich elutriant is of benefit to the later precipitation process in uranium recovery

Recycling of reprocessed uranium

International Nuclear Information System (INIS)

Randl, R.P.

1987-01-01

Since nuclear power was first exploited in the Federal Republic of Germany, the philosophy underlying the strategy of the nuclear fuel cycle has been to make optimum use of the resource potential of recovered uranium and plutonium within a closed fuel cycle. Apart from the weighty argument of reprocessing being an important step in the treatment and disposal of radioactive wastes, permitting their optimum ecological conditioning after the reprocessing step and subsequent storage underground, another argument that, no doubt, carried weight was the possibility of reducing the demand of power plants for natural uranium. In recent years, strategies of recycling have emerged for reprocessed uranium. If that energy potential, too, is to be exploited by thermal recycling, it is appropriate to choose a slightly different method of recycling from the one for plutonium. While the first generation of reprocessed uranium fuel recycled in the reactor cuts down natural uranium requirement by some 15%, the recycling of a second generation of reprocessed, once more enriched uranium fuel helps only to save a further three per cent of natural uranium. Uranium of the second generation already carries uranium-232 isotope, causing production disturbances, and uranium-236 isotope, causing disturbances of the neutron balance in the reactor, in such amounts as to make further fabrication of uranium fuel elements inexpedient, even after mixing with natural uranium feed. (orig./UA) [de

How much uranium

International Nuclear Information System (INIS)

Kenward, M.

1976-01-01

Comment is made on the latest of a series of reports on world uranium resources from the OECD's Nuclear Energy Agency and the UN's International Atomic Energy Agency (Uranium resources, production and demand (including other nuclear fuel cycle data), published by the Organisation for Economic Cooperation and Development, Paris). The report categories uranium reserves by their recovery cost and looks at power demand and the whole of the nuclear fuel cycle, including uranium enrichment and spent fuel reprocessing. The effect that fluctuations in uranium prices have had on exploration for new uranium resources is considered. It is stated that increased exploration is essential considering the long lead times involved but that thanks to today's higher prices there are distinct signs that prospecting activities are increasing again. (U.K.)

Bond Behavior of Historical Clay Bricks Strengthened with Steel Reinforced Polymers (SRP)

Science.gov (United States)

Grande, Ernesto; Imbimbo, Maura; Sacco, Elio

2011-01-01

In the strengthening interventions of past and historical masonry constructions, the non-standardized manufacture processes, the ageing and the damage of masonry units, could significantly affect the properties of the surfaces where strengthening materials are applied. This aspect requires particular care in evaluating the performance of externally bonded strengthening layers, especially with reference to the detachment mechanism. The bond response of old masonries could be very different from that occurring in new masonry units which are the ones generally considered in most of the bond tests available in technical literature. The aim of the present paper is the study of the bond behavior of historical clay bricks strengthened with steel reinforced polymers (SRP) materials. In particular, the results of an experimental study concerning new manufactured clay bricks and old bricks extracted from different historical masonry buildings are presented. The obtained results, particularly in terms of bond resistance, detachment mechanism and strain distributions, are discussed for the purpose of analyzing the peculiarities of the historical bricks in comparison with new manufactured ones. Some considerations on the efficacy of the theoretical formulations of the recent Italian code are also carried out. PMID:28880008

Evaluating the effectiveness of dilution of the recovered uranium with depleted uranium and low-enriched uranium to obtain fuel for VVER reactors

International Nuclear Information System (INIS)

Smirnov, A Yu; Sulaberidze, G A; Dudnikov, A A; Nevinitsa, V A

2016-01-01

The possibility of the recovered uranium enrichment in a cascade of gas centrifuges with three feed flows (depleted uranium, low-enriched uranium, recovered uranium) with simultaneous dilution of U-232,234,236 isotopes was shown. A series of numerical experiments were performed for different content of U-235 in low-enriched uranium. It has been demonstrated that the selected combination of diluents can simultaneously reduce the cost of separative work and the consumption of natural uranium, not only with respect to the previously used multi-flow cascade schemes, but also in comparison to the standard cascade for uranium enrichment. (paper)

Uranium

International Nuclear Information System (INIS)

Anon.

1983-01-01

Recent decisions by the Australian Government will ensure a significant expansion of the uranium industry. Development at Roxby Downs may proceed and Ranger may fulfil two new contracts but the decision specifies that apart from Roxby Downs, no new mines should be approved. The ACTU maintains an anti-uranium policy but reaction to the decision from the trade union movement has been muted. The Australian Science and Technology Council (ASTEC) has been asked by the Government to conduct an inquiry into a number of issues relating to Australia's role in the nuclear fuel cycle. The inquiry will examine in particular Australia's nuclear safeguards arrangements and the adequacy of existing waste management technology. In two additional decisions the Government has dissociated itself from a study into the feasibility of establishing an enrichment operation and has abolished the Uranium Advisory Council. Although Australian reserves account for 20% of the total in the Western World, Australia accounts for a relatively minor proportion of the world's uranium production

New french uranium mineral species

International Nuclear Information System (INIS)

Branche, G.; Chervet, J.; Guillemin, C.

1952-01-01

In this work, the authors study the french new uranium minerals: parsonsite and renardite, hydrated phosphates of lead and uranium; kasolite: silicate hydrated of uranium and lead uranopilite: sulphate of uranium hydrated; bayleyite: carbonate of uranium and of hydrated magnesium; β uranolite: silicate of uranium and of calcium hydrated. For all these minerals, the authors give the crystallographic, optic characters, and the quantitative chemical analyses. On the other hand, the following species, very rare in the french lodgings, didn't permit to do quantitative analyses. These are: the lanthinite: hydrated uranate oxide; the α uranotile: silicate of uranium and of calcium hydrated; the bassetite: uranium phosphate and of hydrated iron; the hosphuranylite: hydrated uranium phosphate; the becquerelite: hydrated uranium oxide; the curite: oxide of uranium and lead hydrated. Finally, the authors present at the end of this survey a primary mineral: the brannerite, complex of uranium titanate. (author) [fr

Fortalecimento da atenção primária à saúde: estratégia para potencializar a coordenação dos cuidados Strengthening primary health care: a strategy to maximize coordination of care

Directory of Open Access Journals (Sweden)

Patty Fidelis de Almeida

2011-02-01

semi-structured interviews with health care managers. In addition, a cross-sectional study was conducted with questionnaires administered to a sample of FHS workers and services users. RESULTS: Actions needed to strengthen primary health care services were identified in all four cities. These include increasing the number of services offered at the primary health care level, removing barriers to access, restructuring primary services as the entry point to the health care system, enhancing problem-solving capacity (diagnostic and therapeutic support and networking between health units to organize the work process, training, and supervision, as well as improving articulation between surveillance and care actions. CONCLUSIONS: The cities studied have gained solid experience in the reorganization of the health care model based on a strengthening of health primary care and of the capacity to undertake the role of health care coordinator. However, to make the primary care level the customary entry point and first choice for users, additional actions are required to balance supplier-induced and consumer-driven demands. Consumerdriven demand is the biggest challenge for the organization of teamwork processes. Support for and recognition of FHS as a basis for primary health care is still an issue. Initiatives to make FHS better known to the population, health care professionals at all levels, and civil society organizations are still needed.

Why can rossing uranium mine keep mining even in low price conditions of uranium market

International Nuclear Information System (INIS)

Tan Chenglong

2004-01-01

Rossing uranium mine is the only operating uranium mine in the world where the uranium occurs in intrusive alaskite. In the past 10 years, uranium market regressed in the world, uranium production weakened, expenditures of capital for uranium exploration were insufficient. Uranium spot market price rapidly decreased from $111.8/kg U in late 1970's to $22.1/kg U in mid-1990's. Why can Rossing uranium mine mined with traditional underground and open pit operation can keep running even in low price conditions of uranium market? Augumenting research on the deposit, mineral and technology, decreasing production cost and improving selling strategy can not only maintain Rossing's uranium production at present, but also ensure sustainable development in the coming 15 years. Exploration of low-costed uranium deposits is very important. However, obvious economic benefits can be obtained, as Rossing uranium mine does, by augumenting geological-economical research on the known uranium deposits of hard-rock type and by using new techniques to improve the conventional techniques in the uranium mine development. (authors)

Uranium in Canada

International Nuclear Information System (INIS)

1987-09-01

Canadian uranium exploration and development efforts in 1985 and 1986 resulted in a significant increase in estimates of measured uranium resources. New discoveries have more than made up for production during 1985 and 1986, and for the elimination of some resources from the overall estimates, due to the sustained upward pressure on production costs and the stagnation of uranium prices in real terms. Canada possesses a large portion of the world's uranium resources that are of current economic interest and remains the major focus of inter-national uranium exploration activity. Expenditures for uranium exploration in Canada in 1985 and 1986 were $32 million and $33 million, respectively. Although much lower than the $130 million total reported for 1979, expenditures for 1987 are forecast to increase. Exploration and surface development drilling in 1985 and 1986 were reported to be 183 000 m and 165σ2 000 m, respectively, 85 per cent of which was in Saskatchewan. Canada has maintained its position as the world's leading producer and exporter of uranium. By the year 2000, Canada's annual uranium requirements will be about 2 100 tU. Canada's known uranium resources are more than sufficient to meet the 30-year fuel requirements of those reactors in Canada that are either in operation now or expected to be in service by the late 1990s. A substantial portion of Canada's identified uranium resources is thus surplus to Canadian needs and available for export. Annual sales currently approach $1 billion, of which exports account for 85 per cent. Forward domestic and export contract commitments totalled 73 000 tU and 62 000 tU, respectively, as of early 1987

Uranium evaluation and mining techniques

International Nuclear Information System (INIS)

1980-01-01

phosphoric acid in fertilizer plants This is being done at several plants in North America, and is gaining favour in many other parts of the world. Uranium is also recovered from copper leach liquors as a by-product and from gold ores in South Africa as a co-product. The symposium also noted that as prices for uranium concentrates increase, lower grade ores can be mined, but lower grade ores contain less uranium per ton of ore and result in lower recovery of uranium in the ore processing plant. Both of these factors require increased rates of mining and processing in order to maintain uranium production schedules and consequently the problem of grade control in the mine increases. Grade control is accomplished by three principle methods: by probing the blast holes in the mine to define the location of ore and waste before the holes are loaded, by pre-processing the ore using radiometric-mechanical means at the mine before sending it to the processing plant, or by radiometric bulk sampling to determine if it should be directed to the dump, stockpile or ore processing plant The final session of the symposium was devoted to production capability. The uncertainty of uranium supply cannot be dealt with only by development of resources. The capability of the industry to produce from those resources at a rate necessary to satisfy the demand must also be considered. This requires careful analysis of the ability of the mines to produce the ore and of the mills to process it. (author)

Uranium - what role

International Nuclear Information System (INIS)

Grey, T.; Gaul, J.; Crooks, P.; Robotham, R.

1980-01-01

Opposing viewpoints on the future role of uranium are presented. Topics covered include the Australian Government's uranium policy, the status of nuclear power around the world, Australia's role as a uranium exporter and problems facing the nuclear industry

Uranium's scientific history

International Nuclear Information System (INIS)

Goldschmidt, B.

1990-01-01

The bicentenary of the discovery of uranium coincides with the fiftieth anniversary of the discovery of fission, an event of worldwide significance and the last episode in the uranium -radium saga which is the main theme of this paper. Uranium was first identified by the German chemist Martin Klaproth in 1789. He extracted uranium oxide from the ore pitchblende which was a by-product of the silver mines at Joachimsthal in Bohemia. For over a century after its discovery, the main application for uranium derived from the vivid colours of its oxides and salts which are used in glazes for ceramics, and porcelain. In 1896, however, Becquerel discovered that uranium emitted ionizing radiation. The extraction by Pierre and Marie Curie of the more radioactive radium from uranium in the early years of the twentieth century and its application to the treatment of cancer shifted the chief interest to radium production. In the 1930s the discovery of the neutron and of artificial radioactivity stimulated research in a number of European laboratories which culminated in the demonstration of fission by Otto Frisch in January 1939. The new found use of uranium for the production of recoverable energy, and the creation of artificial radioelements in nuclear reactors, eliminated the radium industry. (author)

Uranium tipped ammunition

International Nuclear Information System (INIS)

Roche, P.

1993-01-01

During the uranium enrichment process required to make nuclear weapons or fuel, the concentration of the 'fissile' U-235 isotope has to be increased. What is left, depleted uranium, is about half as radioactive as natural uranium, but very dense and extremely hard. It is used in armour piercing shells. External radiation levels from depleted uranium (DU) are low. However DU is about as toxic as lead and could be harmful to the kidneys if eaten or inhaled. It is estimated that between 40 and 300 tonnes of depleted uranium were left behind by the Allied armies after the Gulf war. The biggest hazard would be from depleted uranium shells which have hit Iraqui armoured vehicles and the resulting dust inhaled. There is a possible link between depleted uranium shells and an illness known as 'Desert Storm Syndrome' occurring in some Gulf war veterans. As these shells are a toxic and radioactive hazard to health and the environment their use and testing should be stopped because of the risks to troops and those living near test firing ranges. (UK)

Separation of uranium by biosorption

International Nuclear Information System (INIS)

Volesky, B.; Tsezos, M.

1983-01-01

This invention relates to metal ion separation processes and more particularly to processes of extraction of specific ions of or containing heavy metals from waste liquids by means of biosorption. The invention is based upon the discovery that the biomass produced as the result of the growth of a certain carefully selected microbial genus, namely species of the genus Rhizopus, such as Rhizopus arihizus, has an outstanding ability for selective adsorption of uranium and thorium ions from aqueous solution or suspension

Mechanical behavior and strengthening mechanisms in ultrafine grain precipitation-strengthened aluminum alloy

International Nuclear Information System (INIS)

Ma, Kaka; Wen, Haiming; Hu, Tao; Topping, Troy D.; Isheim, Dieter; Seidman, David N.; Lavernia, Enrique J.; Schoenung, Julie M.

2014-01-01

To provide insight into the relationships between precipitation phenomena, grain size and mechanical behavior in a complex precipitation-strengthened alloy system, Al 7075 alloy, a commonly used aluminum alloy, was selected as a model system in the present study. Ultrafine-grained (UFG) bulk materials were fabricated through cryomilling, degassing, hot isostatic pressing and extrusion, followed by a subsequent heat treatment. The mechanical behavior and microstructure of the materials were analyzed and compared directly to the coarse-grained (CG) counterpart. Three-dimensional atom-probe tomography was utilized to investigate the intermetallic precipitates and oxide dispersoids formed in the as-extruded UFG material. UFG 7075 exhibits higher strength than the CG 7075 alloy for each equivalent condition. After a T6 temper, the yield strength (YS) and ultimate tensile strength (UTS) of UFG 7075 achieved 734 and 774 MPa, respectively, which are ∼120 MPa higher than those of the CG equivalent. The strength of as-extruded UFG 7075 (YS: 583 MPa, UTS: 631 MPa) is even higher than that of commercial 7075-T6. More importantly, the strengthening mechanisms in each material were established quantitatively for the first time for this complex precipitation-strengthened system, accounting for grain-boundary, dislocation, solid-solution, precipitation and oxide dispersoid strengthening contributions. Grain-boundary strengthening was the predominant mechanism in as-extruded UFG 7075, contributing a strength increment estimated to be 242 MPa, whereas Orowan precipitation strengthening was predominant in the as-extruded CG 7075 (∼102 MPa) and in the T6-tempered materials, and was estimated to contribute 472 and 414 MPa for CG-T6 and UFG-T6, respectively

Uranium enrichment

International Nuclear Information System (INIS)

1989-01-01

GAO was asked to address several questions concerning a number of proposed uranium enrichment bills introduced during the 100th Congress. The bill would have restructured the Department of Energy's uranium enrichment program as a government corporation to allow it to compete more effectively in the domestic and international markets. Some of GAO's findings discussed are: uranium market experts believe and existing market models show that the proposed DOE purchase of a $750 million of uranium from domestic producers may not significantly increase production because of large producer-held inventories; excess uranium enrichment production capacity exists throughout the world; therefore, foreign producers are expected to compete heavily in the United States throughout the 1990s as utilities' contracts with DOE expire; and according to a 1988 agreement between DOE's Offices of Nuclear Energy and Defense Programs, enrichment decommissioning costs, estimated to total $3.6 billion for planning purposes, will be shared by the commercial enrichment program and the government

Uranium resources

International Nuclear Information System (INIS)

1976-01-01

This is a press release issued by the OECD on 9th March 1976. It is stated that the steep increases in demand for uranium foreseen in and beyond the 1980's, with doubling times of the order of six to seven years, will inevitably create formidable problems for the industry. Further substantial efforts will be needed in prospecting for new uranium reserves. Information is given in tabular or graphical form on the following: reasonably assured resources, country by country; uranium production capacities, country by country; world nuclear power growth; world annual uranium requirements; world annual separative requirements; world annual light water reactor fuel reprocessing requirements; distribution of reactor types (LWR, SGHWR, AGR, HWR, HJR, GG, FBR); and world fuel cycle capital requirements. The information is based on the latest report on Uranium Resources Production and Demand, jointly issued by the OECD's Nuclear Energy Agency (NEA) and the International Atomic Energy Agency. (U.K.)

Uranium - the world picture

International Nuclear Information System (INIS)

Silver, J.M.; Wright, W.J.

1976-01-01

The world resources of uranium and the future demand for uranium are discussed. The amount of uranium available depends on the price which users are prepared to pay for its recovery. As the price is increased, there is an incentive to recover uranium from lower grade or more difficult deposits. In view of this, attention is drawn to the development of the uranium industry in Australias

Cellular localization of uranium in the renal proximal tubules during acute renal uranium toxicity.

Science.gov (United States)

Homma-Takeda, Shino; Kitahara, Keisuke; Suzuki, Kyoko; Blyth, Benjamin J; Suya, Noriyoshi; Konishi, Teruaki; Terada, Yasuko; Shimada, Yoshiya

2015-12-01

Renal toxicity is a hallmark of uranium exposure, with uranium accumulating specifically in the S3 segment of the proximal tubules causing tubular damage. As the distribution, concentration and dynamics of accumulated uranium at the cellular level is not well understood, here, we report on high-resolution quantitative in situ measurements by high-energy synchrotron radiation X-ray fluorescence analysis in renal sections from a rat model of uranium-induced acute renal toxicity. One day after subcutaneous administration of uranium acetate to male Wistar rats at a dose of 0.5 mg uranium kg(-1) body weight, uranium concentration in the S3 segment of the proximal tubules was 64.9 ± 18.2 µg g(-1) , sevenfold higher than the mean renal uranium concentration (9.7 ± 2.4 µg g(-1) ). Uranium distributed into the epithelium of the S3 segment of the proximal tubules and highly concentrated uranium (50-fold above mean renal concentration) in micro-regions was found near the nuclei. These uranium levels were maintained up to 8 days post-administration, despite more rapid reductions in mean renal concentration. Two weeks after uranium administration, damaged areas were filled with regenerating tubules and morphological signs of tissue recovery, but areas of high uranium concentration (100-fold above mean renal concentration) were still found in the epithelium of regenerating tubules. These data indicate that site-specific accumulation of uranium in micro-regions of the S3 segment of the proximal tubules and retention of uranium in concentrated areas during recovery are characteristics of uranium behavior in the kidney. Copyright © 2015 John Wiley & Sons, Ltd.

Strengthening IAEA safeguards using high-resolution commercial satellite imagery

International Nuclear Information System (INIS)

Zhang Hui

2001-01-01

Full text: In May 1997, the IAEA Board of Governors adopted the Additional Safeguards Protocol to improve its ability to detect the undeclared production of fissile material. This new strengthened safeguards system has opened the door for the IAEA to use of all types of information, including the potential use of commercial satellite imagery. We have therefore been investigating the feasibility of strengthening IAEA safeguards using commercial satellite imagery. Based on our analysis on a number of one-meter resolution IKONOS satellite images of military nuclear production facilities at nuclear states including Russia, China, India, Pakistan and Israel, we found that the new high-resolution commercial satellite imagery would play a new and valuable role in strengthening IAEA safeguards. Since 1999, images with a resolution of one meter have been available commercially from Space Imaging's IKONOS satellite. One-meter images from other companies are expected to enter the market soon. Although still an order of magnitude less capable than military imaging satellites, the capabilities of these new high-resolution commercial satellites are good enough to detect and identify the major visible characteristics of nuclear production facilities and sites. Unlike the classified spy satellite photos limited to few countries, the commercial satellite imagery is commercially available to anyone who wants to purchase it. Therefore, the new commercial satellite open a new chance that each state, international organizations, and non-governmental groups could use the commercial images to play a more proactive role in monitoring the nuclear activities in related countries and verifying the compliance of non-proliferation agreements. This could help galvanize support for intensified efforts to slow the pace of nuclear proliferation. To produce fissile materials (plutonium and highly enriched uranium) for weapons, a country would operate dedicated plutonium-production reactors and the

The uranium in the environment; L'uranium dans l'environnement

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-07-01

The uranium is a natural element omnipresent in the environment, with a complex chemistry more and more understood. Many studies are always today devoted to this element to better improve the uranium behavior in the environment. To illustrate this knowledge and for the public information the CEA published this paper. It gathers in four chapters: historical aspects and properties of the uranium, the uranium in the environment and the impacts, the metrology of the uranium and its migration. (A.L.B.)

Uranium loans

International Nuclear Information System (INIS)

Anon.

1990-01-01

When NUEXCO was organized in 1968, its founders conceived of a business based on uranium loans. The concept was relatively straightforward; those who found themselves with excess supplies of uranium would deposit those excesses in NUEXCO's open-quotes bank,close quotes and those who found themselves temporarily short of uranium could borrow from the bank. The borrower would pay interest based on the quantity of uranium borrowed and the duration of the loan, and the bank would collect the interest, deduct its service fee for arranging the loan, and pay the balance to those whose deposits were borrowed. In fact, the original plan was to call the firm Nuclear Bank Corporation, until it was discovered that using the word open-quotes Bankclose quotes in the name would subject the firm to various US banking regulations. Thus, Nuclear Bank Corporation became Nuclear Exchange Corporation, which was later shortened to NUEXCO. Neither the nuclear fuel market nor NUEXCO's business developed quite as its founders had anticipated. From almost the very beginning, the brokerage of uranium purchases and sales became a more significant activity for NUEXCO than arranging uranium loans. Nevertheless, loan transactions have played an important role in the international nuclear fuel market, requiring the development of special knowledge and commercial techniques

Uranium isotopes in groundwater: their use in prospecting for sandstone-type uranium deposits

International Nuclear Information System (INIS)

Cowart, J.B.; Osmond, J.K.

1977-01-01

The relative abundances of dissolved 238 U and its daughter 234 U appear to be greatly affected as the uranium is transported downdip in sandstone aquifers. In an actively forming uranium accumulation at a reducing barrier, an input of 234 U occurs in proximity to the isotopically non-selective precipitation of uranium from the water. The result is a downdip water much lower in uranium concentration but relatively enriched in 234 U. The measurement of isotopic as well as concentration changes may increase the effectiveness of hydrogeochemical exploration of uranium. The investigation includes the uranium isotopic patterns in aquifers associated with known uranium orebodies in the Powder River and Shirley Basins, Wyoming, and Karnes County, Texas, USA. In addition, the Carrizo sandstone aquifer of Texas was studied in detail and the presence of an uranium accumulation inferred

Uranium market and resources

International Nuclear Information System (INIS)

Capus, G.; Arnold, Th.

2004-01-01

The controversy about the extend of the uranium resources worldwide is still important, this article sheds some light on this topic. Every 2 years IAEA and NEA (nuclear energy agency) edit an inventory of uranium resources as reported by contributing countries. It appears that about 4.6 millions tons of uranium are available at a recovery cost less than 130 dollars per kg of uranium and a total of 14 millions tons of uranium can be assessed when including all existing or supposed resources. In fact there is enough uranium to sustain a moderate growth of the park of nuclear reactors during next decades and it is highly likely that the volume of uranium resources can allow a more aggressive development of nuclear energy. It is recalled that a broad use of the validated breeder technology can stretch the durability of uranium resources by a factor 50. (A.C.)

Validation of the WATEQ4 geochemical model for uranium

International Nuclear Information System (INIS)

Krupka, K.M.; Jenne, E.A.; Deutsch, W.J.

1983-09-01

As part of the Geochemical Modeling and Nuclide/Rock/Groundwater Interactions Studies Program, a study was conducted to partially validate the WATEQ4 aqueous speciation-solubility geochemical model for uranium. The solubility controls determined with the WATEQ4 geochemical model were in excellent agreement with those laboratory studies in which the solids schoepite [UO 2 (OH) 2 . H 2 O], UO 2 (OH) 2 , and rutherfordine ((UO 2 CO 3 ) were identified as actual solubility controls for uranium. The results of modeling solution analyses from laboratory studies of uranyl phosphate solids, however, identified possible errors in the characterization of solids in the original solubility experiments. As part of this study, significant deficiencies in the WATEQ4 thermodynamic data base for uranium solutes and solids were corrected. Revisions included recalculation of selected uranium reactions. Additionally, thermodynamic data for the hydroxyl complexes of U(VI), including anionic (VI) species, were evaluated (to the extent permitted by the available data). Vanadium reactions were also added to the thermodynamic data base because uranium-vanadium solids can exist in natural ground-water systems. This study is only a partial validation of the WATEQ4 geochemical model because the available laboratory solubility studies do not cover the range of solid phases, alkaline pH values, and concentrations of inorganic complexing ligands needed to evaluate the potential solubility of uranium in ground waters associated with various proposed nuclear waste repositories. Further validation of this or other geochemical models for uranium will require careful determinations of uraninite solubility over the pH range of 7 to 10 under highly reducing conditions and of uranyl hydroxide and phosphate solubilities over the pH range of 7 to 10 under oxygenated conditions

Training manual for uranium mill workers on health protection from uranium

International Nuclear Information System (INIS)

McElroy, N.; Brodsky, A.

1986-01-01

This report provides information for uranium mill workers to help them understand the radiation safety aspects of working with uranium as it is processed from ore to yellowcake at the mills. The report is designed to supplement the radiation safety training provided by uranium mills to their workers. It is written in an easily readable style so that new employees with no previous experience working with uranium or radiation can obtain a basic understanding of the nature of radiation and the particular safety requirements of working with uranium. The report should be helpful to mill operators by providing training material to support their radiation safety training programs

Building and strengthening infrastructure for data exchange: lessons from the beacon communities.

Science.gov (United States)

Torres, Gretchen W; Swietek, Karen; Ubri, Petry S; Singer, Rachel F; Lowell, Kristina H; Miller, Wilhelmine

2014-01-01

The Beacon Community Cooperative Agreement Program supports interventions, including care-delivery innovations, provider performance measurement and feedback initiatives, and tools for providers and consumers to enhance care. Using a learning health system framework, we examine the Beacon Communities' processes in building and strengthening health IT (HIT) infrastructures, specifically successes and challenges in sharing patient information to improve clinical care. In 2010, the Office of the National Coordinator for Health Information Technology (ONC) launched the three-year program, which provided $250 million to 17 Beacon Communities to invest in HIT and health information exchange (HIE) infrastructure. Beacon Communities used this funding to develop and disseminate HIT-enabled quality improvement practices found effective in particular community and practice environments. NORC conducted 7 site visits, November 2012-March 2013, selecting Communities to represent diverse program features. From August-October 2013, NORC held discussions with the remaining 10 Communities. Following each visit or discussion, NORC summarized the information gathered, including transcripts, team observations, and other documents the Community provided, to facilitate a within-Community analysis of context and stakeholders, intervention strategies, enabling factors, and challenges. Although each Community designed and implemented data-sharing strategies in a unique environment, similar challenges and enabling factors emerged across the Beacons. From a learning health system perspective, their strategies to build and strengthen data-sharing infrastructures address the following crosscutting priorities: promoting technical advances and innovations by helping providers adapt EHRs for data exchange and performance measurement with customizable IT and offering technical support to smaller, independent providers; engaging key stakeholders; and fostering transparent governance and stewardship

Uranium/plutonium and uranium/neptunium separation by the Purex process using hydroxyurea

International Nuclear Information System (INIS)

Zhu Zhaowu; He Jianyu; Zhang Zefu; Zhang Yu; Zhu Jianmin; Zhen Weifang

2004-01-01

Hydroxyurea dissolved in nitric acid can strip plutonium and neptunium from tri-butyl phosphate efficiently and has little influence on the uranium distribution between the two phases. Simulating the 1B contactor of the Purex process by hydroxyurea with nitric acid solution as a stripping agent, the separation factors of uranium/plutonium and uranium/neptunium can reach values as high as 4.7 x 10 4 and 260, respectively. This indicates that hydroxyurea is a promising salt free agent for uranium/plutonium and uranium/neptunium separations. (author)

Determination of uranium in uranium metal, uranium oxides, and uranyl nitrate solutions by potentiometric titration

International Nuclear Information System (INIS)

Tucker, H.L.; McElhaney, R.J.

1983-01-01

A simple, fast method for the determination of uranium in uranium metal, uranium oxides, and uranyl nitrate solutions has been adapted from the Davies-Gray volumetric method to meet the needs of Y-12. One-gram duplicate aliquots of uranium metal or uranium oxide are dissolved in 1:1 HNO 3 and concentrated H 2 SO 4 to sulfur trioxide fumes, and then diluted to 100-mL volume. Duplicate aliquots are then weighed for analysis. For uranyl nitrate samples, duplicate aliquots containing between 50 and 150 mg of U are weighed and analyzed directly. The weighed aliquot is transferred to a Berzelius beaker; 1.5 M sulfamic acid is added, followed in order by concentrated phosphoric acid, 1 M ferrous sulfate, and (after a 30-second interval) the oxidizing reagent. After a timed 3-minute waiting period, 100 mL of the 0.1% vanadyl sulfate-sulfuric acid mixture is added. The sample is then titrated past its endpoint with standard potassium dichromate, and the endpoint is determined by second derivative techniques on a mV/weight basis

Uranium: one utility's outlook

International Nuclear Information System (INIS)

Gass, C.B.

1983-01-01

The perspective of the Arizona Public Service Company (APS) on the uncertainty of uranium as a fuel supply is discussed. After summarizing the history of nuclear power and the uranium industries, a projection is made for the future uranium market. An uncrtain uranium market is attributed to various determining factors that include international politics, production costs, non-commercial government regulation, production-company stability, and questionable levels of uranium sales. APS offers its solutions regarding type of contract, choice of uranium producers, pricing mechanisms, and aids to the industry as a whole. 5 references, 10 figures, 1 table

Australian uranium today

International Nuclear Information System (INIS)

Fisk, B.

1978-01-01

The subject is covered in sections, entitled: Australia's resources; Northern Territory uranium in perspective; the government's decision [on August 25, 1977, that there should be further development of uranium under strictly controlled conditions]; Government legislation; outlook [for the Australian uranium mining industry]. (U.K.)

Solid state processing of massive uranium mononitride, using uranium and uranium higher nitride powders as starting materials (1962); Preparation a l'etat solide de mononitrure d'uranium massif a partir de poudres d'uranium et de nitrures superieurs d'uranium (1962)

Energy Technology Data Exchange (ETDEWEB)

Molinari, J [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

1960-12-15

The mechanism and the optimum conditions for preparing uranium mononitride have been studied. The results have been used for hot pressing (250 kg/cm{sup 2}, 1000 deg. C, under vacuum) a mixture of powders of uranium and uranium higher nitrides. The products obtained have been identified by X-ray measurements and may be - at will and depending upon the stoichiometry - either UN, or a cermet a U{sub {alpha}}-UN. As revealed by the curved shape of grain boundaries, the sinters obtained here do not easily evolve towards physico-chemical equilibrium when submitted to heat treatment. This behaviour is quite different from the one observed with uranium monocarbide prepared by a similar method. This fact may be ascribed to the insolubility in the matrix UN of particles of UO{sub 2} being present as impurities. The density, hardness and thermal conductivity of these products are higher than those measured on uranium nitride or cermets U-UN obtained by other methods. (author) [French] Apres une etude prealable du mecanisme et des conditions optimales de nitruration de l'uranium, on a montre qu'il est possible de preparer par frittage sous charge (250 kg/cm{sup 2}, 1000 deg. C sous vide) d'un melange de poudres d'uranium et de nitrures superieurs d'uranium, un produit qui a ete identifie par diffraction de rayons X. On peut ainsi obtenir a volonte, soit le monocarbure UN, soit un cermet U{sub {alpha}}-UN dans le cas de compositions sous-stoechiometriques. Au contraire du monocarbure d'uranium prepare dans des conditions analogues, les produits obtenus ici, soumis a un traitement thermique, n'evoluent pas facilement vers un etat d'equilibre physico-chimique caracterise par l'existence de joints de grains rectilignes. On attribue ce phenomene a l'insolubilite de l'impurete UO{sub 2} dans UN. La densite, la durete, la conductibilite thermique de ces produits se revelent superieures a celles des nitrures d'uranium ou des cermets U-UN obtenus par les autres methodes. (auteur)

Exploration of priority actions for strengthening the role of nurses in achieving universal health coverage

Directory of Open Access Journals (Sweden)

Rowaida Al Maaitah

Full Text Available ABSTRACT Objective: to explore priority actions for strengthening the role of Advanced Practice Nurses (APNs towards the achievement of Universal Health Converge (UHC as perceived by health key informants in Jordan. Methods: an exploratory qualitative design, using a semi-structured survey, was utilized. A purposive sample of seventeen key informants from various nursing and health care sectors was recruited for the purpose of the study. Content analysis utilizing the five-stage framework approach was used for data analysis. Results: the findings revealed that policy and regulation, nursing education, research, and workforce were identified as the main elements that influence the role of APNs in contributing to the achievement of UHC. Priority actions were identified by the participants for the main four elements. Conclusion: study findings confirm the need to strengthen the role of APNs to achieve UHC through a major transformation in nursing education, practice, research, leadership, and regulatory system. Nurses should unite to come up with solid nursing competencies related to APNs, PHC, UHC, leadership and policy making to strengthen their position as main actors in influencing the health care system and evidence creation.

Grinding as an approach to the production of high-strength, dispersion-strengthened nickel-base alloys

Science.gov (United States)

Orth, N. W.; Quatinetz, M.; Weeton, J. W.

1970-01-01

Mechanical process produces dispersion-strengthened metal alloys. Power surface contamination during milling is removed by a cleaning method that involves heating thin shapes or partially-compacted milled powder blends in hydrogen to carefully controlled temperature schedules.

Removal of uranium from uranium-contaminated soils -- Phase 1: Bench-scale testing. Uranium in Soils Integrated Demonstration

Energy Technology Data Exchange (ETDEWEB)

Francis, C. W.

1993-09-01

To address the management of uranium-contaminated soils at Fernald and other DOE sites, the DOE Office of Technology Development formed the Uranium in Soils Integrated Demonstration (USID) program. The USID has five major tasks. These include the development and demonstration of technologies that are able to (1) characterize the uranium in soil, (2) decontaminate or remove uranium from the soil, (3) treat the soil and dispose of any waste, (4) establish performance assessments, and (5) meet necessary state and federal regulations. This report deals with soil decontamination or removal of uranium from contaminated soils. The report was compiled by the USID task group that addresses soil decontamination; includes data from projects under the management of four DOE facilities [Argonne National Laboratory (ANL), Los Alamos National Laboratory (LANL), Oak Ridge National Laboratory (ORNL), and the Savannah River Plant (SRP)]; and consists of four separate reports written by staff at these facilities. The fundamental goal of the soil decontamination task group has been the selective extraction/leaching or removal of uranium from soil faster, cheaper, and safer than current conventional technologies. The objective is to selectively remove uranium from soil without seriously degrading the soil`s physicochemical characteristics or generating waste forms that are difficult to manage and/or dispose of. Emphasis in research was placed more strongly on chemical extraction techniques than physical extraction techniques.

Sandstone-type uranium deposits

International Nuclear Information System (INIS)

Austin, S.R.; D'Andrea, R.F. Jr.

1978-01-01

Three overall factors are necessary for formation of uranium deposits in sandstone: a source of uranium, host rocks capable of transmitting uranium-bearing solutions, and a precipitant. Possible sources of uranium in sandstone-type deposits include groundwaters emanating from granitic highlands, arkosic sediments, tuffaceous material within or overlying the host rocks, connate fluids, and overlying black shales. The first three sources are considered the most likely. Host rocks are generally immature sandstones deposited in alluvial-fan, intermontane-basin or marginal-marine environments, but uranium deposits do occur in well-winnowed barrier-bar or eolian sands. Host rocks for uranium deposits generally show coefficients of permeability on the order of 1 to 100 gal/day/ft 2 . Precipitants are normally agents capable of reducing uranium from the uranyl to the uranous state. The association of uranium with organic matter is unequivocal; H 2 S, a powerful reductant, may have been present at the time of formation of some deposits but may go unnoticed today. Vanadium can serve to preserve the tabular characteristics of some deposits in the near-surface environment, but is considered an unlikely primary precipitant for uranium. Uranium deposits in sandstone are divided into two overall types: peneconcordant deposits, which occur in locally reducing environments in otherwise oxidized sandstones; and roll-type deposits, which occur at the margin of an area where an oxidized groundwater has permeated an otherwise reduced sandstone. Uranium deposits are further broken down into four subclasses; these are described

URANIUM LEACHING AND RECOVERY PROCESS

Science.gov (United States)

McClaine, L.A.

1959-08-18

A process is described for recovering uranium from carbonate leach solutions by precipitating uranium as a mixed oxidation state compound. Uranium is recovered by adding a quadrivalent uranium carbon;te solution to the carbonate solution, adjusting the pH to 13 or greater, and precipitating the uranium as a filterable mixed oxidation state compound. In the event vanadium occurs with the uranium, the vanadium is unaffected by the uranium precipitation step and remains in the carbonate solution. The uranium-free solution is electrolyzed in the cathode compartment of a mercury cathode diaphragm cell to reduce and precipitate the vanadium.

Politics of Uranium

International Nuclear Information System (INIS)

Anon.

1982-01-01

Uranium is the most political of all the elements, the material for the production of both the large amounts of electricity and the most destructive weapons in the world. The problems that its dual potential creates are only now beginning to become evident. Author Norman Moss looks at this situation and sheds light on many of the questions that emerge. The nuclear issue always comes back to how much uranium there is, what can be done with it, and which countries have it. Starting with a concise history of uranium and explaining its technology in terms the nonspecialist can understand, The Politics of Uranium considers the political issues that technical arguments obscure. It tells the little-known story of the international uranium cartel, explains the entanglements of governments with the uranium trade, and describes the consequences of wrong decisions and blunders-especially the problems of nuclear waste. It also examines the intellectual and emotional roots of the anti-nuclear movement

Uranium-scintillator device

International Nuclear Information System (INIS)

Smith, S.D.

1979-01-01

The calorimeter subgroup of the 1977 ISABELLE Summer Workshop strongly recommended investigation of the uranium-scintillator device because of its several attractive features: (1) increased resolution for hadronic energy, (2) fast time response, (3) high density (i.e., 16 cm of calorimeter per interaction length), and, in comparison with uranium--liquid argon detectors, (4) ease of construction, (5) simple electronics, and (6) lower cost. The AFM group at the CERN ISR became interested in such a calorimeter for substantially the same reasons, and in the fall of 1977 carried out tests on a uranium-scintillator (U-Sc) calorimeter with the same uranium plates used in their 1974 studies of the uranium--liquid argon (U-LA) calorimeter. The chief disadvantage of the scintillator test was that the uranium plates were too small to fully contain the hadronic showers. However, since the scintillator and liquid argon tests were made with the plates, direct comparison of the two types of devices could be made

The significance of zircon characteristic and its uranium concentration in evaluation of uranium metallogenetic prospect

International Nuclear Information System (INIS)

Li Yaosong; Zhu Jiechen; Xia Yuliang

1992-02-01

Zircon characteristic and its relation to uranium metallogenetic process have been studied on the basis of physics properties and chemical compositions. It is indicated that the colour of zircon crystal is related to uranium concentration; on the basis of method of zircon population type of Pupin J.P., the sectional plan of zircon population type has been designed, from which result that zircon population type of uranium-producing rock body is distributed mainly in second section, secondly in fourth section; U in zircon presents synchronous increase trend with Th, Hf and Ta; the uranium concentration in zircon from uranium-producing geologic body increases obviously and its rate of increase is more than that of the uranium concentration in rock; the period, in which uranium concentration in zircon is increased, is often related to better uranium-producing condition in that period of this area. 1785 data of the average uranium concentration in zircon have been counted and clear regularity has been obtained, namely the average uranium concentrations in zircon in rich uranium-producing area, rock, geologic body and metallogenetic zone are all higher than that in poor or no uranium-producing area, rock, geologic body and metallogenetic zone. This shows that the average uranium concentration in zircon within the region in fact reflects the primary uranium-bearing background in region and restricts directly follow-up possibility of uranium mineralization. On the basis of this, the uranium source conditions of known uranium metallogenetic zones and prospective provinces have been discussed, and the average uranium concentrations in zircon from magmatic rocks for 81 districts have been contrasted and graded, and some districts in which exploration will be worth doing further are put forward

Method of preparing uranium nitride or uranium carbonitride bodies

International Nuclear Information System (INIS)

Wilhelm, H.A.; McClusky, J.K.

1976-01-01

Sintered uranium nitride or uranium carbonitride bodies having a controlled final carbon-to-uranium ratio are prepared, in an essentially continuous process, from U 3 O 8 and carbon by varying the weight ratio of carbon to U 3 O 8 in the feed mixture, which is compressed into a green body and sintered in a continuous heating process under various controlled atmospheric conditions to prepare the sintered bodies. 6 claims, no drawings

Preloading Effect on Strengthening Efficiency of RC Beams Strengthened with Non- and Pretensioned NSM Strips

Directory of Open Access Journals (Sweden)

Renata Kotynia

2018-02-01

Full Text Available The near surface mounted (NSM technique has been shown to be one of the most promising methods for upgrading reinforced concrete (RC structures. Many tests carried out on RC members strengthened in flexure with NSM fiber-reinforced polymer (FRP systems have demonstrated greater strengthening efficiency than the use of externally-bonded (EB FRP laminates. Strengthening with simultaneous pretensioning of the FRP results in improvements in the serviceability limit state (SLS conditions, including the increased cracking moment and decreased deflections. The objective of the reported experimental program, which consisted of two series of RC beams strengthened in flexure with NSM CFRP strips, was to investigate the influence of a number of parameters on the strengthening efficiency. The test program focused on an analysis of the effects of preloading on the strengthening efficiency which has been investigated very rarely despite being one of the most important parameters to be taken into account in strengthening design. Two preloading levels were considered: the beam self-weight only, which corresponded to stresses on the internal longitudinal reinforcement of 25% and 14% of the yield stress (depending on a steel reinforcement ratio, and the self-weight with the additional superimposed load, corresponding to 60% of the yield strength of the unstrengthened beam and a deflection equal to the allowable deflection at the SLS. The influence of the longitudinal steel reinforcement ratio was also considered in this study. To reflect the variability seen in existing structures, test specimens were varied by using different steel bar diameters. Finally, the impact of the composite reinforcement ratio and the number of pretensioned FRP strips was considered. Specimens were divided into two series based on their strengthening configuration: series “A” were strengthened with one pretensioned and two non-pretensioned carbon FRP (CFRP strips, while series �

Radiation monitoring of uranium workers

International Nuclear Information System (INIS)

1998-12-01

In order to manage radiological hazards in the workplace, it is necessary to have reliable measurements of workplace radiation levels and estimates of exposures and doses to workers. Over the past several years there have been many changes not only to the science of monitoring and dose assessment, but also to the regulatory framework. New International Commission on Radiological Protection (ICRP) recommendations on dose in ICRP Publication 60 (1991) and the implications of the ICRP's new respiratory tract model in ICRP Publication 66 (1994) are of particular importance. In addition, triggered by the act establishing the Canadian Nuclear Safety Commission (CNSC), which will replace the Atomic Energy Control Board (AECB), there is considerable activity in the review and development of regulatory guidance. Concurrent with these activities is the introduction of innovative mining procedures in Saskatchewan in order to extract uranium ore of particularly high grade. In view of these developments, the ACRP considered that a formal review of current monitoring practices would benefit both the CNSC and its licensees. In this report, 'uranium workers' refers to workers at uranium mines and mills, and workers at natural-uranium refineries, conversion, and fuel fabrication facilities; issues relating to long-term tailings management and to the handling of enriched materials are not addressed in this document. The report will have some relevance to workers in non-uranium mines and in industries handling naturally occurring radioactive materials (NORM) since, in some circumstances, these activities can present similar workplace radiation hazards. The report outlines the radiological hazards encountered in the Canadian uranium industry, and reviews current radiological monitoring practices and options; appendices include a glossary, a more technical discussion of monitoring methods, and an examination of errors and uncertainties in measurements of radon progeny and long

Uranium

International Nuclear Information System (INIS)

Perkin, D.J.

1982-01-01

Developments in the Australian uranium industry during 1980 are reviewed. Mine production increased markedly to 1841 t U 3 O 8 because of output from the new concentrator at Nabarlek and 1131 t of U 3 O 8 were exported at a nominal value of $37.19/lb. Several new contracts were signed for the sale of yellowcake from Ranger and Nabarlek Mines. Other developments include the decision by the joint venturers in the Olympic Dam Project to sink an exploration shaft and the release of an environmental impact statement for the Honeymoon deposit. Uranium exploration expenditure increased in 1980 and additions were made to Australia's demonstrated economic uranium resources. A world review is included

Uranium: a basic evaluation

International Nuclear Information System (INIS)

Crull, A.W.

1978-01-01

All energy sources and technologies, including uranium and the nuclear industry, are needed to provide power. Public misunderstanding of the nature of uranium and how it works as a fuel may jeopardize nuclear energy as a major option. Basic chemical facts about uranium ore and uranium fuel technology are presented. Some of the major policy decisions that must be made include the enrichment, stockpiling, and pricing of uranium. Investigations and lawsuits pertaining to uranium markets are reviewed, and the point is made that oil companies will probably have to divest their non-oil energy activities. Recommendations for nuclear policies that have been made by the General Accounting Office are discussed briefly

Fluorinated compounds in the uranium conversion process: risk analysis and proposition of pictograms

International Nuclear Information System (INIS)

Jeronimo, Adroaldo Clovis; Oliveira, Wagner dos Santos

2012-01-01

In the process of uranium hexafluoride production there are risks that must be taken into account since the time of completing the project chemist, in its conceptual stage, until to the stage of detailed design and are associated with the handling of chemicals, especially fluoride hydrogen and fluorine. This paper aims to address issues related to the prevention of risks related to industrial safety and health and the environment, considering the different stages of the uranium conversion. Take into account the safety warnings of the plant and, accordingly, make the proposition of pictograms adequate to alert operators of care to be taken during the proposition of pictograms adequate to alert operators of care to be taken during the conduct of these chemical processes. (author)

Phospholyl-uranium complexes

International Nuclear Information System (INIS)

Gradoz, Philippe

1993-01-01

After having reported a bibliographical study on penta-methylcyclopentadienyl uranium complexes, and a description of the synthesis and radioactivity of uranium (III) and (IV) boron hydrides compounds, this research thesis reports the study of mono and bis-tetramethyl-phospholyl uranium complexes comprising chloride, boron hydride, alkyl and alkoxide ligands. The third part reports the comparison of structures, stabilities and reactions of homologue complexes in penta-methylcyclopentadienyl and tetramethyl-phospholyl series. The last part addresses the synthesis of tris-phospholyl uranium (III) and (IV) complexes. [fr

Dry uranium tetrafluoride process preparation using the uranium hexafluoride reconversion process effluents

International Nuclear Information System (INIS)

Silva Neto, Joao Batista da

2008-01-01

It is a well known fact that the use of uranium tetrafluoride allows flexibility in the production of uranium suicide and uranium oxide fuel. To its obtention there are two conventional routes, the one which reduces uranium from the UF 6 hydrolysis solution with stannous chloride, and the hydro fluorination of a solid uranium dioxide. In this work we are introducing a third and a dry way route, mainly utilized to the recovery of uranium from the liquid effluents generated in the uranium hexafluoride reconversion process, at IPEN/CNEN-SP. Working in the liquid phase, this route comprises the recuperation of ammonium fluoride by NH 4 HF 2 precipitation. Working with the solid residues, the crystallized bifluoride is added to the solid UO 2 , which comes from the U mini plates recovery, also to its conversion in a solid state reaction, to obtain UF 4 . That returns to the process of metallic uranium production unity to the U 3 Si 2 obtention. This fuel is considered in IPEN CNEN/SP as the high density fuel phase for IEA-R1m reactor, which will replace the former low density U 3 Si 2 -Al fuel. (author)

Uranium dioxide electrolysis

Science.gov (United States)

Willit, James L [Batavia, IL; Ackerman, John P [Prescott, AZ; Williamson, Mark A [Naperville, IL

2009-12-29

This is a single stage process for treating spent nuclear fuel from light water reactors. The spent nuclear fuel, uranium oxide, UO.sub.2, is added to a solution of UCl.sub.4 dissolved in molten LiCl. A carbon anode and a metallic cathode is positioned in the molten salt bath. A power source is connected to the electrodes and a voltage greater than or equal to 1.3 volts is applied to the bath. At the anode, the carbon is oxidized to form carbon dioxide and uranium chloride. At the cathode, uranium is electroplated. The uranium chloride at the cathode reacts with more uranium oxide to continue the reaction. The process may also be used with other transuranic oxides and rare earth metal oxides.

Uranium distribution in Brazilian granitic rocks. Identification of uranium provinces

International Nuclear Information System (INIS)

Tassinari, C.G.G.

1993-01-01

The research characterized and described uranium enriched granitoids in Brazil. They occur in a variety of tectonic environments and are represented by a variety granite types of distinct ages. It may be deduced that in general they have been generated by partial melting process of continental crust. However, some of them, those with tonality composition, indicate a contribution from mantle derived materials, thus suggesting primary uranium enrichment from the upper mantle. Through this study, the identification and characterization of uranium enriched granite or uranium provinces in Brazil can be made. This may also help identify areas with potential for uranium mineralization although it has been note that uranium mineralization in Brazil are not related to the uranium enrichment process. In general the U-anomalous granitoids are composed of granites with alkaline composition and granite ''sensu strictu'' which comprise mainly of syenites, quartz-syenites and biotite-hornblende granites, with ages between 1,800 - 1,300 M.a. The U-anomalous belongings to this period present high Sr initial ratios values, above 0.706, and high Rb contents. Most of the U-enriched granitoids occur within ancient cratonic areas, or within Early to Mid-Proterozoic mobile belts, but after their cratonization. Generally, these granitoids are related to the border zones of the mobile belts or deep crustal discontinuity. Refs, 12 figs, 3 tabs

Uranium resource assessments

International Nuclear Information System (INIS)

1981-01-01

The objective of this investigation is to examine what is generally known about uranium resources, what is subject to conjecture, how well do the explorers themselves understand the occurrence of uranium, and who are the various participants in the exploration process. From this we hope to reach a better understanding of the quality of uranium resource estimates as well as the nature of the exploration process. The underlying questions will remain unanswered. But given an inability to estimate precisely our uranium resources, how much do we really need to know. To answer this latter question, the various Department of Energy needs for uranium resource estimates are examined. This allows consideration of whether or not given the absence of more complete long-term supply data and the associated problems of uranium deliverability for the electric utility industry, we are now threatened with nuclear power plants eventually standing idle due to an unanticipated lack of fuel for their reactors. Obviously this is of some consequence to the government and energy consuming public. The report is organized into four parts. Section I evaluates the uranium resource data base and the various methodologies of resource assessment. Part II describes the manner in which a private company goes about exploring for uranium and the nature of its internal need for resource information. Part III examines the structure of the industry for the purpose of determining the character of the industry with respect to resource development. Part IV arrives at conclusions about the emerging pattern of industrial behavior with respect to uranium supply and the implications this has for coping with national energy issues

Uranium processing and properties

CERN Document Server

2013-01-01

Covers a broad spectrum of topics and applications that deal with uranium processing and the properties of uranium Offers extensive coverage of both new and established practices for dealing with uranium supplies in nuclear engineering Promotes the documentation of the state-of-the-art processing techniques utilized for uranium and other specialty metals

Uranium energy dependence

International Nuclear Information System (INIS)

Erkes, P.

1981-06-01

Uranium supply and demand as projected by the Uranium Institute is discussed. It is concluded that for the industrialized countries, maximum energy independence is a necessity. Hence it is necessary to achieve assurance of supply for uranium used in thermal power reactors in current programs and eventually to move towards breeders

Uranium-236 as an indicator of fuel-cycle uranium in ground water

International Nuclear Information System (INIS)

Jaquish, R.E.

1989-08-01

Environmental monitoring on and around the Hanford Site includes regular sampling of onsite monitoring wells and offsite farm wells. Uranium has been identified in the ground water onsite and also in water from farm wells located on the east side of the Columbia River, across from the Hanford Site. Information on the hydrology of the area indicates that the source of the offsite uranium is not the Hanford Site. This study evaluated the isotopic composition of the uranium in water from the various wells to differentiate the onsite uranium contamination from natural uranium offsite. 5 refs., 2 figs., 2 tabs

Uranium in Canada

International Nuclear Information System (INIS)

1989-01-01

In 1988 Canada's five uranium producers reported output of concentrate containing a record 12,470 metric tons of uranium (tU), or about one third of total Western world production. Shipments exceeded 13,200 tU, valued at $Cdn 1.1 billion. Most of Canada's uranium output is available for export for peaceful purposes, as domestic requirements represent about 15 percent of production. The six uranium marketers signed new sales contracts for over 11,000 tU, mostly destined for the United States. Annual exports peaked in 1987 at 12,790 tU, falling back to 10,430 tU in 1988. Forward domestic and export contract commitments were more than 70,000 tU and 60,000 tU, respectively, as of early 1989. The uranium industry in Canada was restructured and consolidated by merger and acquisition, including the formation of Cameco. Three uranium projects were also advanced. The Athabasca Basin is the primary target for the discovery of high-grade low-cost uranium deposits. Discovery of new reserves in 1987 and 1988 did not fully replace the record output over the two-year period. The estimate of overall resources as of January 1989 was down by 4 percent from January 1987 to a total (measured, indicated and inferred) of 544,000 tU. Exploration expenditures reached $Cdn 37 million in 1987 and $59 million in 1988, due largely to the test mining programs at the Cigar Lake and Midwest projects in Saskatchewan. Spot market prices fell to all-time lows from 1987 to mid-1989, and there is little sign of relief. Canadian uranium production capability could fall below 12,000 tU before the late 1990s; however, should market conditions warrant output could be increased beyond 15,000 tU. Canada's known uranium resources are more than sufficient to meet the 30-year fuel requirements of those reactors in Canada that are now or are expected to be in service by the late 1990s. There is significant potential for discovering additional uranium resources. Canada's uranium production is equivalent, in

Beyond an energy deal: Impacts of the Sino-Australia uranium agreement

Energy Technology Data Exchange (ETDEWEB)

Wu Jiaping [School for Social and Policy Research, Charles Darwin University, Darwin, NT 0909 (Australia)], E-mail: jiaping.wu@cdu.edu.au; Garnett, Stephen T.; Barnes, Tony [School for Social and Policy Research, Charles Darwin University, Darwin, NT 0909 (Australia)

2008-01-15

Is the spectacular growth of Sino-Australian trade compelling Australian policy-makers to strengthen strategic support for China in the face of traditional alliances? The recently signed trade agreement under which Australia will annually export 20,000 tonnes of uranium to China for power generation for the next 20 years, will feed China's increased energy demand, allow a reduction in dependence on coal-based energy and ameliorate environmental deterioration, all matters that have become critical to China's economic growth. Yet the uranium trade will contribute only slightly to China's energy needs, and to the Australian economy. However, the trade deal was signed even though China, as a nuclear military power, is a potential threat to Australia's strongest military ally, the US. At the same time it reignited a divisive debate in Australia, covering a wide range of political, social, economic, health and environmental policy areas that reach well beyond strategic relationships. That the Australian Government will risk both internal and external criticism seems to be further recognition that Australia is becoming increasingly dependent on the continued growth of China's economy for its prosperity.

Beyond an energy deal: Impacts of the Sino-Australia uranium agreement

Energy Technology Data Exchange (ETDEWEB)

Wu, Jiaping; Garnett, Stephen T.; Barnes, Tony [School for Social and Policy Research, Charles Darwin University, Darwin, NT 0909 (Australia)

2008-01-15

Is the spectacular growth of Sino-Australian trade compelling Australian policy-makers to strengthen strategic support for China in the face of traditional alliances? The recently signed trade agreement under which Australia will annually export 20,000 tonnes of uranium to China for power generation for the next 20 years, will feed China's increased energy demand, allow a reduction in dependence on coal-based energy and ameliorate environmental deterioration, all matters that have become critical to China's economic growth. Yet the uranium trade will contribute only slightly to China's energy needs, and to the Australian economy. However, the trade deal was signed even though China, as a nuclear military power, is a potential threat to Australia's strongest military ally, the US. At the same time it reignited a divisive debate in Australia, covering a wide range of political, social, economic, health and environmental policy areas that reach well beyond strategic relationships. That the Australian Government will risk both internal and external criticism seems to be further recognition that Australia is becoming increasingly dependent on the continued growth of China's economy for its prosperity. (author)

Chemical thermodynamics of uranium

International Nuclear Information System (INIS)

Grenthe, I.; Fuger, J.; Lemire, R.J.; Muller, A.B.; Nguyen-Trung Cregu, C.; Wanner, H.

1992-01-01

A comprehensive overview on the chemical thermodynamics of those elements that are of particular importance in the safety assessment of radioactive waste disposal systems is provided. This is the first volume in a series of critical reviews to be published on this subject. The book provides an extensive compilation of chemical thermodynamic data for uranium. A description of procedures for activity corrections and uncertainty estimates is given. A critical discussion of data needed for nuclear waste management assessments, including areas where significant gaps of knowledge exist is presented. A detailed inventory of chemical thermodynamic data for inorganic compounds and complexes of uranium is listed. Data and their uncertainty limits are recommended for 74 aqueous complexes and 199 solid and 31 gaseous compounds containing uranium, and on 52 aqueous and 17 solid auxiliary species containing no uranium. The data are internally consistent and compatible with the CODATA Key Values. The book contains a detailed discussion of procedures used for activity factor corrections in aqueous solution, as well as including methods for making uncertainty estimates. The recommended data have been prepared for use in environmental geochemistry. Containing contributions written by experts the chapters cover various subject areas such a s: oxide and hydroxide compounds and complexes, the uranium nitrides, the solid uranium nitrates and the arsenic-containing uranium compounds, uranates, procedures for consistent estimation of entropies, gaseous and solid uranium halides, gaseous uranium oxides, solid phosphorous-containing uranium compounds, alkali metal uranates, uncertainties, standards and conventions, aqueous complexes, uranium minerals dealing with solubility products and ionic strength corrections. The book is intended for nuclear research establishments and consulting firms dealing with uranium mining and nuclear waste disposal, as well as academic and research institutes

Precipitation of uranium peroxide from the leach liquor of uranium ores

International Nuclear Information System (INIS)

Gao Xizhen; Lin Sirong; Guo Erhua; Lu Shijie

1995-06-01

A chemical precipitation process of recovering uranium from the leach liquor of uranium ores was investigated. The process primarily includes the precipitation of iron with lime, the preprocessing of the slurry of iron hydroxides and the precipitation of uranium with H 2 O 2 . The leach liquor is neutralized by lime milk to pH 3.7 to precipitate the iron hydroxides which after flocculation and settle is separated out and preprocessed at 170 degree C in an autoclave. H 2 O 2 is then used to precipitate uranium in the leach liquor free of iron, and the pH of process for uranium precipitation adjusted by adding MgO slurry to 3.5. The barren solution can be used to wash the filter cakes of leach tailing. The precipitated slurry of iron hydroxides after being preprocessed is recycled to leaching processes for recovering uranium in it. This treatment can not only avoid the filtering of the slurry of iron hydroxides, but also prevent the iron precipitate from redissolving and consequently the increase of iron concentration in the leach liquor. The results of the investigation indicate that lime, H 2 O 2 and MgO are the main chemical reagents used to obtain the uranium peroxide product containing over 65% uranium from the leach liquor, and they also do not cause environmental pollution. In accordance with the uranium content in the liquor, the consumption of chemical reagent for H 2 O 2 (30%) and MgO are 0.95 kg/kgU and 0.169 kg/kgU, respectively. (1 fig., 8 tabs., 7 refs.)

Uranium material removing and recovering device

International Nuclear Information System (INIS)

Takita, Shin-ichi.

1997-01-01

A uranium material removing and recovering device for use in removing surplus uranium heavy metal (UO 2 ) generated in a uranium handling facility comprises a uranium material removing device and a uranium material recovering device. The uranium material removing device comprises an adsorbing portion filled with a uranium adsorbent, a control portion for controlling the uranium adsorbent of the uranium adsorbing portion by a controlling agent, a uranium adsorbing device connected thereto and a jetting device for jetting the adsorbing liquid to equipments deposited with uranium. The recovering device comprises a recovering apparatus for recovering uranium materials deposited with the adsorbent liquid removed by the jetting device and a recovering tank for storing the recovered uranium materials. The device of the present invention can remove surplus uranium simply and safely, mitigate body's load upon removing and recovering operations, facilitate the processing for the exchange of the adsorbent and reduces the radioactive wastes. (T.M.)

Recovering uranium from phosphates

Energy Technology Data Exchange (ETDEWEB)

Bergeret, M [Compagnie de Produits Chimiques et Electrometallurgiques Pechiney-Ugine Kuhlmann, 75 - Paris (France)

1981-06-01

Processes for the recovery of the uranium contained in phosphates have today become competitive with traditional methods of working uranium sources. These new possibilities will make it possible to meet more rapidly any increases in the demand for uranium: it takes ten years to start working a new uranium deposit, but only two years to build a recovery plant.

System for the hydrogeologic analysis of uranium mill waste disposal sites

International Nuclear Information System (INIS)

Osiensky, J.L.

1983-01-01

Most of the uranium mill wastes generated before 1977 are stored in unlined tailings ponds. Seepage from some of these ponds has been of sufficient severity that the US Nuclear Regulatory Commission (NRC) has required the installation of withdrawal wells to remove the contaminated groundwater. Uranium mill waste disposal facilities typically are located in complex hydrogeologic environments. This research was initiated in 1980 to analyze hydrogeologic data collected at seven disposal sites in the US that have experienced problems with groundwater contamination. The characteristics of seepage migration are site specific and are controlled by the hydrogeologic environment in the vicinity of each tailings pond. Careful monitoring of most seepage plumes was not initiated until approximately 1977. These efforts were accelerated as a consequence of the uranium Mill Tailings Act of 1979. Some of the data collected at uranium mill waste disposal sites in the past are incomplete and some were collected by methods that are outdated. Data frequently were collected in sequences which disrupted the continuity of the hydrogeologic analysis and decreased the effectiveness of the data collection programs. Evaluation of data collection programs for seven uranium mill waste disposal sites in the US has led to the development and presentation herein of a system for the hydrogeologic analysis of disposal sites

The measurement test of uranium in a uranium-contaminated waste by passive gamma-rays measurement method

CERN Document Server

Sukegawa, Y; Ohki, K; Suzuki, S; Yoshida, M

2002-01-01

This report is completed about the measurement test and the proofreading of passive gamma - rays measurement method for Non - destructive assay of uranium in a uranium-contaminated waste. The following are the results of the test. 1) The estimation of the amount of uranium by ionization survey meter is difficult for low intensity of gamma-rays emitted from uranium under about 50g. 2) The estimation of the amount of uranium in the waste by NaI detector is possible in case of only uranium, but the estimation from mixed spectrums with transmission source (60-cobalt) is difficult to confirm target peaks. 3) If daughter nuclides of uranium and thorium chain of uranium ore exist, measurement by NaI detector is affected by gamma-rays from the daughter nuclides seriously-As a result, the estimation of the amount of uranium is difficult. 4) The measurement of uranium in a uranium-contaminated waste by germanium detector is possible to estimate of uranium and other nuclides. 5) As to estimation of the amount of uranium...

Epidemiology of ebolavirus disease (EVD and occupational EVD in health care workers in Sub-Saharan Africa: Need for strengthened public health preparedness

Directory of Open Access Journals (Sweden)

Nlandu Roger Ngatu

2017-09-01

Full Text Available Ebolavirus disease (EVD is a severe contagious disease in humans, and health care workers (HCW are at risk of infection when caring for EVD patients. This paper highlights the epidemiologic profile of EVD and its impact on the health care workforce in Africa. A documentary study was conducted which consisted of a review of available literature regarding the epidemiology of EVD, occupational EVD (OEVD, and work safety issues in Sub-Saharan Africa; the literature findings are enriched by field experiences from the authors. EVD outbreaks have already caused 30,500 cases in humans of whom 12,933 died (as of September 9, 2015, and the number of infected HCW has dramatically increased. All eight HCW infected during the 2014 outbreak in Democratic Republic of the Congo died, whereas during the recent West African EVD epidemic more than 890 HCW were infected, with a case fatality rate of 57%. Occupational exposure to blood and other body fluids due to inadequate use of personal protective equipment and needle stick or sharp injuries are among factors that contribute to the occurrence of OEVD. Prevention of OEVD should be one of the top priorities in EVD outbreak preparedness and management, and research should be conducted to elucidate occupational and other factors that expose HCW to EVD. In addition to regularly training HCW to be adequately prepared to care for patients with EVD, it is critical to strengthen the general health care system and improve occupational safety in medical settings of countries at risk.

Jabiluka uranium project

International Nuclear Information System (INIS)

Anon.

1991-01-01

The Jabiluka uranium and gold deposit located in the Northern Territory of Australia is the world's largest known primary uranium deposits and as such has the potential to become one of the most important uranium projects in the world. Despite the financial and structural challenges facing the major owner Pancontinental Mining Limited and the changing political policies in Australia, Jabiluka is well situated for development during the 1990's. With the availability of numerous financial and development alternatives, Jabiluka could, by the turn of the century, take its rightful place among the first rank of world uranium producers. The paper discusses ownership, location, property rights, licensing, environmental concerns, marketing and development, capital costs, royalties, uranium policy considerations, geologic exploration history, regional and site geology, and mining and milling operations

In situ leach uranium mining. Proceedings of a technical committee meeting. Working material

International Nuclear Information System (INIS)

2002-03-01

At the beginning of 1996 there were 437 nuclear power plants in operation with a combined electricity generating capacity of 344 GWe (net gigawatts electric). This represents nearly a 100% increase over the last decade. In 1995 over 2228 TWh (terawatt hours) electricity were generated, equivalent to about 17% of the world's total electricity. To achieve this, about 61 400 tonnes U were required as nuclear fuel. The 15 year decline of the spot uranium price, as indicated by Nuexco Exchange Value (NEV) and other indices, which reached an all time low annual average in 1994 of $18.33/kg U ($7.05/pound U 3 O 8 ), has had a profound impact on uranium related activities. This led to the massive reduction and realignment of all uranium related activities as the worldwide uranium market adjusted from over-production. Because of the economic advantages of properly run in situ leach technology on carefully selected uranium orebodies, relatively more ISL mining facilities have been kept in operation than conventional mining operations. In 1995 world uranium production of about 34 000 t uranium met only about 55% of world requirements. An estimated 16% of production came from ISL mining. In 1996 ISL mining was estimated to have produced over 5600 tU, or over 15% of estimated world production of 36 400 tU. The importance of ISL mining is expected to increase, as the technology has economic and environmental advantages for producing uranium from carefully selected deposits when projects are properly designed and operated by experienced personnel. Several countries host sandstone type uranium deposits, the only type where commercial ISL projects have been developed. ISL uranium mining technology was developed independently in the USA and the former Soviet Union and associated non-WOCA (world outside centrally planned economic areas) countries starting in the 1960s and 1970s. Since the opening of relations between the two areas in the early 1990s there has been a high level of

Uranium and the War: The effects of depleted uranium weapons in Iraq

International Nuclear Information System (INIS)

Jon williams

2007-01-01

The U.S. Army revealed in March 2003 that it dropped between 320 and 390 tons of depleted uranium during the Gulf War-the first time the material was ever used in combat-and it is estimated that more still has been dropped during the current invasion, though there have been no official counts as yet. Nuclear weapons and nuclear power plants require highly radioactive uranium, so the uranium 238 is removed from the naturally occurring uranium by a process known as enrichment. Depleted uranium is the by-product of the uranium enrichment process. Depleted uranium was a major topic of discussion during a Feb. 24 forum at Santa Cruz with speakers from the Iraq Veterans Against War (IVAW). The panel consisted of five members of the IVAW chapter in Olympia, Washington who visited Santa Cruz as part of a speaking tour of the west coast. These members of the IVAW believe that their experiences in the Gulf War were the beginnings of what will be a long-term health problem in the region. A study conducted by the Pentagon in 2002 predicted that every future battlefield will be contaminated with depleted uranium. Up-to-date health information from Iraq is difficult to come by. But a November report from Al-jazeera concluded that the cancer rate in Iraq has increased tenfold, and the number of birth defects has multiplied fivefold times since the 1991 war. The increase is believed to be caused by depleted uranium.

Selective Removal of Uranium from the Washing Solution of Uranium-Contaminated Soil

Energy Technology Data Exchange (ETDEWEB)

Kim, Seung Soo; Han, G. S.; Kim, G. N.; Koo, D. S.; Jeong, J. W.; Choi, J. W. [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2015-10-15

This study examined selective removal methods of uranium from the waste solution by ion exchange resins or solvent extraction methods to reduce amount of the 2{sup nd} waste. Alamine-336, known as an excellent extraction reagent of uranium from the leaching solution of uranium ore, did not remove uranium from the acidic washing solution of soil. Uranyl ions in the acidic waste solution were sorbed on ampholyte resin with a high sorption efficiency, and desorbed from the resin by a washing with 0.5 M Na{sub 2}CO{sub 3} solution at 60 .deg. C. However, the uranium dissolved in the sulfuric acid solution was not sorbed onto the strong anion exchanger resins. A great amount of uranium-contaminated (U-contaminated) soil had been generated from the decommissioning of a uranium conversion plant. Our group has developed a decontamination process with washing and electrokinetic methods to decrease the amount of waste to be disposed of. However, this process generates a large amount of waste solution containing various metal ions.

Recovery of uranium from seawater

International Nuclear Information System (INIS)

Hirotsu, Takahiro; Takagi, Norio; Katoh, Shunsaku

1995-01-01

Present status of the development of chelating adsorbents for the recovery of uranium from seawater is outlined with emphasis on the research by the author. Uranium is estimated to exist as stable tri (carbonate) uranylate (6) ion in seawater in a very low concentration. The adsorbent for uranium from seawater in a very low concentration. The adsorbent for uranium from seawater should have high selectivity and affinity for uranium around pH 8. The required characteristics for uranium adsorbent are examined. Various chelating adsorbents have been proposed for the uranium adsorbent and their structures are discussed. Amidoxime type adsorbents have the highest adsorbing power for uranium among the adsorbents hitherto developed and fibrous amidoxime adsorbents are most promising for the practical application. Synthesis, structure and suitable shape of the amidoxime adsorbents are discussed. Uranium adsorption behavior and the amount of saturated adsorption are examined theoretically based on the complexation of an amidoxime monomer and the formula for the adsorption equiliburium is derived. The adsorption and recovery process for uranium from seawater is composed of adsorption, desorption, separation and concentration and finally, uranium is recovered as the yellow cake. A floating body mooring system is proposed by Nobukawa. (T.H.)

Uranium producers foresee new boom

International Nuclear Information System (INIS)

McIntyre, H.

1979-01-01

The status of uranium production in Canada is reviewed. Uranium resources in Saskatchewan and Ontario are described and the role of the Cluff Lake inquiry in securing a government decision in favour of further uranium development is mentioned. There have been other uranium strikes near Kelowna, British Columbia and in the Northwest Territories. Increasing uranium demand and favourable prices are making the development of northern resources economically attractive. In fact, all uranium currently produced has been committed to domestic and export contracts so that there is considerable room for expanding the production of uranium in Canada. (T.I.)

Feasibility studies on electrochemical separation and recovery of uranium by using domestic low grade uranium resources

International Nuclear Information System (INIS)

Oh, Won Zin; Jung, Chong Hun; Lee, Kune Woo; Won, Hui Jun; Choi, Wang Kyu; Kim, Gye Nam; Lee, Yu Ri; Lee, Joong Moung

2005-12-01

The up-to-date electrochemical uranium separation technology has been developed for uranium sludge waste treatment funded by a long term national nuclear technology development program. The objective of the studies is to examine applicability of the uranium separation technology to making use of the low grade uranium resources in the country. State of the arts of uranium separation and recovery from the low grade national uranium resources. - The amount of the high grade uranium resources(0.1 % U 3 O 8 contents) in the world is 1,750,000MTU and that of the low grade uranium resources(0.04 % U 3 O 8 contents) in the country is 340,000MTU. - The world uranium price will be increase to more than 30$/l0b in 10 years, so that the low grade uranium in the country become worth while to recover. - The conventional uranium recovery technologies are based on both acidic - The ACF electrochemical uranium separation technology is the state of the art technology in the world and the adsorption capability of 690 mgU/g is several ten times higher than that of a conventional zeolite and the uranium stripping efficiency by desorption is more than 99%. So, this technology is expected to replace the existing solvent extraction technology. Feasibility of the ACF electrochemical uranium separation technology as an uranium recovery method. Lab scale demonstration of uranium separation and recovery technologies have been carried out by using an ACF electrochemical method

METHOD OF RECOVERING URANIUM COMPOUNDS

Science.gov (United States)

Poirier, R.H.

1957-10-29

S>The recovery of uranium compounds which have been adsorbed on anion exchange resins is discussed. The uranium and thorium-containing residues from monazite processed by alkali hydroxide are separated from solution, and leached with an alkali metal carbonate solution, whereby the uranium and thorium hydrorides are dissolved. The carbonate solution is then passed over an anion exchange resin causing the uranium to be adsorbed while the thorium remains in solution. The uranium may be recovered by contacting the uranium-holding resin with an aqueous ammonium carbonate solution whereby the uranium values are eluted from the resin and then heating the eluate whereby carbon dioxide and ammonia are given off, the pH value of the solution is lowered, and the uranium is precipitated.

Uranium mining

International Nuclear Information System (INIS)

2008-01-01

Full text: The economic and environmental sustainability of uranium mining has been analysed by Monash University researcher Dr Gavin Mudd in a paper that challenges the perception that uranium mining is an 'infinite quality source' that provides solutions to the world's demand for energy. Dr Mudd says information on the uranium industry touted by politicians and mining companies is not necessarily inaccurate, but it does not tell the whole story, being often just an average snapshot of the costs of uranium mining today without reflecting the escalating costs associated with the process in years to come. 'From a sustainability perspective, it is critical to evaluate accurately the true lifecycle costs of all forms of electricity production, especially with respect to greenhouse emissions, ' he says. 'For nuclear power, a significant proportion of greenhouse emissions are derived from the fuel supply, including uranium mining, milling, enrichment and fuel manufacture.' Dr Mudd found that financial and environmental costs escalate dramatically as the uranium ore is used. The deeper the mining process required to extract the ore, the higher the cost for mining companies, the greater the impact on the environment and the more resources needed to obtain the product. I t is clear that there is a strong sensitivity of energy and water consumption and greenhouse emissions to ore grade, and that ore grades are likely to continue to decline gradually in the medium to long term. These issues are critical to the current debate over nuclear power and greenhouse emissions, especially with respect to ascribing sustainability to such activities as uranium mining and milling. For example, mining at Roxby Downs is responsible for the emission of over one million tonnes of greenhouse gases per year and this could increase to four million tonnes if the mine is expanded.'

Issues in uranium availability

International Nuclear Information System (INIS)

Schanz, J.J. Jr.; Adams, S.S.; Gordon, R.L.

1982-01-01

The purpose of this publication is to show the process by which information about uranium reserves and resources is developed, evaluated and used. The following three papers in this volume have been abstracted and indexed for the Energy Data Base: (1) uranium reserve and resource assessment; (2) exploration for uranium in the United States; (3) nuclear power, the uranium industry, and resource development

Bicarbonate leaching of uranium

International Nuclear Information System (INIS)

Mason, C.

1998-01-01

The alkaline leach process for extracting uranium from uranium ores is reviewed. This process is dependent on the chemistry of uranium and so is independent on the type of mining system (conventional, heap or in-situ) used. Particular reference is made to the geochemical conditions at Crownpoint. Some supporting data from studies using alkaline leach for remediation of uranium-contaminated sites is presented

Bicarbonate leaching of uranium

Energy Technology Data Exchange (ETDEWEB)

Mason, C.

1998-12-31

The alkaline leach process for extracting uranium from uranium ores is reviewed. This process is dependent on the chemistry of uranium and so is independent on the type of mining system (conventional, heap or in-situ) used. Particular reference is made to the geochemical conditions at Crownpoint. Some supporting data from studies using alkaline leach for remediation of uranium-contaminated sites is presented.

Uranium Mill Tailings Management

International Nuclear Information System (INIS)

Nelson, J.D.

1982-01-01

This book presents the papers given at the Fifth Symposium on Uranium Mill Tailings Management. Advances made with regard to uranium mill tailings management, environmental effects, regulations, and reclamation are reviewed. Topics considered include tailings management and design (e.g., the Uranium Mill Tailings Remedial Action Project, environmental standards for uranium mill tailings disposal), surface stabilization (e.g., the long-term stability of tailings, long-term rock durability), radiological aspects (e.g. the radioactive composition of airborne particulates), contaminant migration (e.g., chemical transport beneath a uranium mill tailings pile, the interaction of acidic leachate with soils), radon control and covers (e.g., radon emanation characteristics, designing surface covers for inactive uranium mill tailings), and seepage and liners (e.g., hydrologic observations, liner requirements)

Strengthening health workforce capacity through work-based training

Directory of Open Access Journals (Sweden)

Matovu Joseph KB

2013-01-01

Full Text Available Abstract Background Although much attention has been given to increasing the number of health workers, less focus has been directed at developing models of training that address real-life workplace needs. Makerere University School of Public Health (MakSPH with funding support from the Centers for Disease Control and Prevention (CDC developed an eight-month modular, in-service work-based training program aimed at strengthening the capacity for monitoring and evaluation (M&E and continuous quality improvement (CQI in health service delivery. Methods This capacity building program, initiated in 2008, is offered to in-service health professionals working in Uganda. The purpose of the training is to strengthen the capacity to provide quality health services through hands-on training that allows for skills building with minimum work disruptions while encouraging greater involvement of other institutional staff to enhance continuity and sustainability. The hands-on training uses practical gaps and challenges at the workplace through a highly participatory process. Trainees work with other staff to design and implement ‘projects’ meant to address work-related priority problems, working closely with mentors. Trainees’ knowledge and skills are enhanced through short courses offered at specific intervals throughout the course. Results Overall, 143 trainees were admitted between 2008 and 2011. Of these, 120 (84% from 66 institutions completed the training successfully. Of the trainees, 37% were Social Scientists, 34% were Medical/Nursing/Clinical Officers, 5.8% were Statisticians, while 23% belonged to other professions. Majority of the trainees (80% were employed by Non-Government Organizations while 20% worked with the public health sector. Trainees implemented 66 projects which addressed issues such as improving access to health care services; reducing waiting time for patients; strengthening M&E systems; and improving data collection and

Brazilian uranium exploration program

International Nuclear Information System (INIS)

Marques, J.P.M.

1981-01-01

General information on Brazilian Uranium Exploration Program, are presented. The mineralization processes of uranium depoits are described and the economic power of Brazil uranium reserves is evaluated. (M.C.K.) [pt

Formation conditions for regenerated uranium blacks in uranium-molybdenum deposits

International Nuclear Information System (INIS)

Skvortsova, K.V.; Sychev, I.V.; Modnikov, I.S.; Zhil'tsova, I.G.

1980-01-01

Formation conditions of regenerated uranium blacks in the zone of incomplete oxidation and cementation of uranium-molybdenum deposit have been studied. Mixed and regenerated blacks were differed from residual ones by the method of determining excess quantity of lead isotope (Pb 206 ) in ores. Determined were the most favourable conditions for formation of regenerated uranium blacks: sheets of brittle and permeable volcanic rocks characterized by heterogeneous structure of a section, by considerable development of gentle interlayer strippings and zones of hydrothermal alteration; predominance of reduction conditions in a media over oxidation ones under limited oxygen access and other oxidating agents; the composition of hypogenic ores characterized by optimum correlations of uranium minerals, sulfides and carbonates affecting violations of pH in oxidating solutions in the range of 5-6; the initial composition of ground water resulting from climatic conditions of the region and the composition of ore-bearing strata and others. Conditions unfavourable for the formation of regenerated uranium blacks are shown

Feasibility study of the dissolution rates of uranium ore dust, uranium concentrates and uranium compounds in simulated lung fluid

International Nuclear Information System (INIS)

Robertson, R.

1986-01-01

A flow-through apparatus has been devised to study the dissolution in simulated lung fluid of aerosol materials associated with the Canadian uranium industry. The apparatus has been experimentally applied over 16 day extraction periods to approximately 2g samples of < 38um and 53-75um particle-size fractions of both Elliot Lake and Mid-Western uranium ores. The extraction of uranium-238 was in the range 24-60% for these samples. The corresponding range for radium-226 was 8-26%. Thorium-230, lead-210, polonium-210, and thorium-232 were not significantly extracted. It was incidentally found that the elemental composition of the ores studied varies significantly with particle size, the radionuclide-containing minerals and several extractable stable elements being concentrated in the smaller size fraction. Samples of the refined compounds uranium dioxide and uranium trioxide were submitted to similar 16 day extraction experiments. Approximately 0.5% of the uranium was extracted from a 0.258g sample of unsintered (fluid bed) uranium dioxide of particle size < 38um. The corresponding figure for a 0.292g sample of uranium trioxide was 97%. Two aerosol samples on filters were also studied. Of the 88ug uranium initially measured on stage 2 of a cascade impactor sample collected from the yellow cake packing area of an Elliot Lake mill, essentially 100% was extracted over a 16 day period. The corresponding figure for an open face filter sample collected in a fuel fabrication plant and initially measured at 288ug uranium was approximately 3%. Recommendations are made with regard to further work of a research nature which would be useful in this area. Recommendations are also made on sampling methods, analytical methods and extraction conditions for various aerosols of interest which are to be studied in a work of broader scope designed to yield meaningful data in connection with lung dosimetry calculations

Purification of uranium metal

International Nuclear Information System (INIS)

Suzuki, Kenji; Shikama, Tatsuo; Ochiai, Akira.

1993-01-01

We developed the system for purifying uranium metal and its metallic compounds and for growing highly pure uranium compounds to study their intrinsic physical properties. Uranium metal was zone refined under low contamination conditions as far as possible. The degree of the purity of uranium metal was examined by the conventional electrical resistivity measurement and by the chemical analysis using the inductive coupled plasma emission spectrometry (ICP). The results show that some metallic impurities evaporated by the r.f. heating and other usual metallic impurities moved to the end of a rod with a molten zone. Therefore, we conclude that the zone refining technique is much effective to the removal of metallic impurities and we obtained high purified uranium metal of 99.99% up with regarding to metallic impurities. The maximum residual resistivity ratio, the r.r.r., so far obtained was about 17-20. Using the purified uranium, we are attempting to grow a highly pure uranium-titanium single crystals. (author)

Uranium. Resources, production and demand

International Nuclear Information System (INIS)

1997-01-01

The events characterising the world uranium market in the last several years illustrate the persistent uncertainly faced by uranium producers and consumers worldwide. With world nuclear capacity expanding and uranium production satisfying only about 60 per cent of demand, uranium stockpiles continue to be depleted at a high rate. The uncertainty related to the remaining levels of world uranium stockpiles and to the amount of surplus defence material that will be entering the market makes it difficult to determine when a closer balance between uranium supply and demand will be reached. Information in this report provides insights into changes expected in uranium supply and demand until well into the next century. The 'Red Book', jointly prepared by the OECD Nuclear Energy Agency and the International Atomic Energy Agency, is the foremost reference on uranium. This world report is based on official information from 59 countries and includes compilations of statistics on resources, exploration, production and demand as of 1 January 1997. It provides substantial new information from all of the major uranium producing centres in Africa, Australia, Eastern Europe, North America and the New Independent States, including the first-ever official reports on uranium production in Estonia, Mongolia, the Russian Federation and Uzbekistan. It also contains an international expert analysis of industry statistics and worldwide projections of nuclear energy growth, uranium requirements and uranium supply

A review of the environmental behavior of uranium derived from depleted uranium alloy penetrators

Energy Technology Data Exchange (ETDEWEB)

Erikson, R.L.; Hostetler, C.J.; Divine, J.R.; Price, K.R.

1990-01-01

The use of depleted uranium (DU) penetrators as armor-piercing projectiles in the field results in the release of uranium into the environment. Elevated levels of uranium in the environment are of concern because of radioactivity and chemical toxicity. In addition to the direct contamination of the soil with uranium, the penetrators will also chemically react with rainwater and surface water. Uranium may be oxidized and leached into surface water or groundwater and may subsequently be transported. In this report, we review some of the factors affecting the oxidation of the DU metal and the factors influencing the leaching and mobility of uranium through surface water and groundwater pathways, and the uptake of uranium by plants growing in contaminated soils. 29 refs., 10 figs., 3 tabs.

Refining of crude uranium by solvent extraction for production of nuclear pure uranium metal

International Nuclear Information System (INIS)

Gupta, S.K.; Manna, S.; Singha, M.; Hareendran, K.N.; Chowdhury, S.; Satpati, S.K.; Kumar, K.

2007-01-01

Uranium is the primary fuel material for any nuclear fission energy program. Natural uranium contains only 0.712% of 235 U as fissile constituent. This low concentration of fissile isotope in natural uranium calls for a very high level of purity, especially with respect to neutron poisons like B, Cd, Gd etc. before it can be used as nuclear fuel. Solvent extraction is a widely used technique by which crude uranium is purified for reactor use. Uranium metal plant (UMP), BARC, Trombay is engaged in refining of uranium concentrate for production of nuclear pure uranium metal for fabrication of fuel for research reactors. This paper reviews some of the fundamental aspects of this refining process with some special references to UMP, BARC. (author)

Uranium XAFS analysis of kidney from rats exposed to uranium.

Science.gov (United States)

Kitahara, Keisuke; Numako, Chiya; Terada, Yasuko; Nitta, Kiyohumi; Shimada, Yoshiya; Homma-Takeda, Shino

2017-03-01

The kidney is the critical target of uranium exposure because uranium accumulates in the proximal tubules and causes tubular damage, but the chemical nature of uranium in kidney, such as its chemical status in the toxic target site, is poorly understood. Micro-X-ray absorption fine-structure (µXAFS) analysis was used to examine renal thin sections of rats exposed to uranyl acetate. The U L III -edge X-ray absorption near-edge structure spectra of bulk renal specimens obtained at various toxicological phases were similar to that of uranyl acetate: their edge position did not shift compared with that of uranyl acetate (17.175 keV) although the peak widths for some kidney specimens were slightly narrowed. µXAFS measurements of spots of concentrated uranium in the micro-regions of the proximal tubules showed that the edge jump slightly shifted to lower energy. The results suggest that most uranium accumulated in kidney was uranium (VI) but a portion might have been biotransformed in rats exposed to uranyl acetate.

Discussion on prospecting potential for rich uranium deposits in Xiazhuang uranium ore-field, northern Guangdong

International Nuclear Information System (INIS)

Wu Lieqin; Tan Zhengzhong

2004-01-01

Based on analyzing the prospecting potential for uranium deposits in Xiazhuang uranium ore field this paper discusses the prospecting for rich uranium deposits and prospecting potential in the region. Research achievements indicate: that the Xiazhuang ore-field is an ore-concentrated area where uranium has been highly enriched, and possesses good prospecting potential and perspective, becoming one of the most important prospecting areas for locating rich uranium deposits in northern Guangdong; that the 'intersection type', the alkaline metasomatic fractured rock type and the vein-group type uranium deposits are main targets and the prospecting direction for future uranium prospecting in this region

Transformations of highly enriched uranium into metal or oxide; Etudes des procedes de transformation des composes d'uranium a fort enrichissement isotopique

Energy Technology Data Exchange (ETDEWEB)

Nollet, P; Sarrat, P [Commissariat a l' Energie Atomique, Fontenay-aux-Roses (France). Centre d' Etudes Nucleaires

1964-07-01

The enriched uranium workshops in Cadarache have a double purpose on the one hand to convert uranium hexafluoride into metal or oxide, and on the other hand to recover the uranium contained in scrap materials produced in the different metallurgical transformations. The principles that have been adopted for the design and safety of these workshops are reported. The nuclear safety is based on the geometrical limitations of the processing vessels. To establish the processes and the technology of these workshops, many studies have been made since 1960, some of which have led to original achievements. The uranium hexafluoride of high isotopic enrichment is converted either by injection of the gas into ammonia or by an original process of direct hydrogen reduction to uranium tetrafluoride. The uranium contained m uranium-zirconium metal scrap can be recovered by combustion with hydrogen chloride followed treatment of the uranium chloride by fluorine in order to obtain the uranium in the hexafluoride state. Recovery of the uranium contained m various scrap materials is obtained by a conventional refining process combustion of metallic scrap, nitric acid dissolution of the oxide, solvent purification by tributyl phosphate, ammonium diuranate precipitation, calcining, reduction and hydro fluorination into uranium tetrafluoride, bomb reduction by calcium and slag treatment. Two separate workshops operate along these lines one takes care of the uranium with an isotopic enrichment of up to 3 p. 100, the other handles the high enrichments. The handling of each step of this process, bearing in mind the necessity for nuclear safety, has raised some special technological problems and has led to the conception of new apparatus, in particular the roasting furnace for metal turnings, the nitric acid dissolution unit, the continuous precipitator and ever safe filter and dryer for ammonium diuranate, the reduction and hydro fluorination furnace and the slag recovery apparatus These are

Tertiary lithofacies and paleo-geographic framework and interlayer oxidation zone sandstone uranium deposits in Longjiang-Zhaozhou area

International Nuclear Information System (INIS)

Zhang Zhenqiang

2003-01-01

The main points of views for the experiment are: (1) Yi'an formation is mainly composed of limnetic facies of siltstone and fine sandstone, due to weak surface water, limited sedimentation and simple material source; (2) strengthened surface water and enormous material brought from north and west-north and enlarged sedimentation from north to south, the major deposition during Da'an period are channel facies of conglomerate and river bed facies of sandstone; (3) stronger surface water during Taikang period, led alluvial-flood plain facies brown-yellow conglomerate to develop along western margin of the basin, the channel facies of conglomerate and river bed facies of grey-green sandstone, pelitic siltstone were widely formed southward and eastward; (4) according to the lithofacies criterion for in-situ leachable sandstone uranium ore, Taikang formation is an ideal horizon, river bed facies is suitable for interlayer oxidation type uranium deposit. (author)

Speculative resources of uranium. A review of International Uranium Resources Evaluation Project (IUREP) estimates 1982-1983

International Nuclear Information System (INIS)

1983-01-01

On a country by country basis the International Uranium Resources Evaluation Project (IUREP) estimates 1982-1983 are reviewed. Information provided includes exploration work, airborne survey, radiometric survey, gamma-ray spectrometric survey, estimate of speculative resources, uranium occurrences, uranium deposits, uranium mineralization, agreements for uranium exploration, feasibilities studies, geological classification of resources, proposed revised resource range, production estimate of uranium

Uranium market 1986-2000

Energy Technology Data Exchange (ETDEWEB)

1986-01-01

The report on the uranium market describes the technical and economic factors influencing the nuclear fuel industry in mid-1986. The contents of the report includes a discussion of: the nuclear generating capacity, the demand for uranium (requirements and procurements), supplies of uranium, and the interaction between supply and demand. The report does not study in depth the effects of the Chernobyl accident on the uranium market.

Uranium industry annual 1993

International Nuclear Information System (INIS)

1994-09-01

Uranium production in the United States has declined dramatically from a peak of 43.7 million pounds U 3 O 8 (16.8 thousand metric tons uranium (U)) in 1980 to 3.1 million pounds U 3 O 8 (1.2 thousand metric tons U) in 1993. This decline is attributed to the world uranium market experiencing oversupply and intense competition. Large inventories of uranium accumulated when optimistic forecasts for growth in nuclear power generation were not realized. The other factor which is affecting U.S. uranium production is that some other countries, notably Australia and Canada, possess higher quality uranium reserves that can be mined at lower costs than those of the United States. Realizing its competitive advantage, Canada was the world's largest producer in 1993 with an output of 23.9 million pounds U 3 O 8 (9.2 thousand metric tons U). The U.S. uranium industry, responding to over a decade of declining market prices, has downsized and adopted less costly and more efficient production methods. The main result has been a suspension of production from conventional mines and mills. Since mid-1992, only nonconventional production facilities, chiefly in situ leach (ISL) mining and byproduct recovery, have operated in the United States. In contrast, nonconventional sources provided only 13 percent of the uranium produced in 1980. ISL mining has developed into the most cost efficient and environmentally acceptable method for producing uranium in the United States. The process, also known as solution mining, differs from conventional mining in that solutions are used to recover uranium from the ground without excavating the ore and generating associated solid waste. This article describes the current ISL Yang technology and its regulatory approval process, and provides an analysis of the factors favoring ISL mining over conventional methods in a declining uranium market

Uranium industry annual 1993

Energy Technology Data Exchange (ETDEWEB)

1994-09-01

Uranium production in the United States has declined dramatically from a peak of 43.7 million pounds U{sub 3}O{sub 8} (16.8 thousand metric tons uranium (U)) in 1980 to 3.1 million pounds U{sub 3}O{sub 8} (1.2 thousand metric tons U) in 1993. This decline is attributed to the world uranium market experiencing oversupply and intense competition. Large inventories of uranium accumulated when optimistic forecasts for growth in nuclear power generation were not realized. The other factor which is affecting U.S. uranium production is that some other countries, notably Australia and Canada, possess higher quality uranium reserves that can be mined at lower costs than those of the United States. Realizing its competitive advantage, Canada was the world`s largest producer in 1993 with an output of 23.9 million pounds U{sub 3}O{sub 8} (9.2 thousand metric tons U). The U.S. uranium industry, responding to over a decade of declining market prices, has downsized and adopted less costly and more efficient production methods. The main result has been a suspension of production from conventional mines and mills. Since mid-1992, only nonconventional production facilities, chiefly in situ leach (ISL) mining and byproduct recovery, have operated in the United States. In contrast, nonconventional sources provided only 13 percent of the uranium produced in 1980. ISL mining has developed into the most cost efficient and environmentally acceptable method for producing uranium in the United States. The process, also known as solution mining, differs from conventional mining in that solutions are used to recover uranium from the ground without excavating the ore and generating associated solid waste. This article describes the current ISL Yang technology and its regulatory approval process, and provides an analysis of the factors favoring ISL mining over conventional methods in a declining uranium market.

Uranium geochemistry, mineralogy, geology, exploration and resources

International Nuclear Information System (INIS)

De Vivo, B.

1984-01-01

This book comprises papers on the following topics: history of radioactivity; uranium in mantle processes; transport and deposition of uranium in hydrothermal systems at temperatures up to 300 0 C: Geological implications; geochemical behaviour of uranium in the supergene environment; uranium exploration techniques; uranium mineralogy; time, crustal evolution and generation of uranium deposits; uranium exploration; geochemistry of uranium in the hydrographic network; uranium deposits of the world, excluding Europe; uranium deposits in Europe; uranium in the economics of energy; role of high heat production granites in uranium province formation; and uranium deposits

Uranium: biokinetics and toxicity; Biocinetique et toxicite de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Menetrier, F.; Renaud-Salis, V.; Flury-Herard, A

2000-07-01

This report was achieved as a part of a collaboration with the Fuel Cycle Direction. Its aim was to give the state of the art about: the behaviour of uranium in the human organism (biokinetics) after ingestion, its toxicity (mainly renal) and the current regulation about its incorporation. Both in the upstream and in the downstream of the fuel cycle, uranium remains, quantitatively, the first element in the cycle which is, at the present time, temporarily disposed or recycled. Such a considerable quantity of uranium sets the problem of its risk on the health. In the long term, the biosphere may be affected and consequently the public may ingest water or food contaminated with uranium. In this way, radiological and chemical toxicity risk may be activated. This report emphasizes: the necessity of confirming some experimental and epidemiological biokinetic data used or not in the ICRP models. Unsolved questions remain about the gastrointestinal absorption according to chemical form (valency state, mixtures...), mass and individual variations (age, disease) further a chronic ingestion of uranium. It is well established that uranium is mainly deposited in the skeleton and the kidney. But the skeleton kinetics following a chronic ingestion and especially in some diseases has to be more elucidated; the necessity of taking into account uranium at first as a chemical toxic, essentially in the kidney and determining the threshold of functional lesion. In this way, it is important to look for some specific markers; the problem of not considering chemical toxicity of uranium in the texts regulating its incorporation.

Airborne uranium, its concentration and toxicity in uranium enrichment facilities

International Nuclear Information System (INIS)

Thomas, J.; Mauro, J.; Ryniker, J.; Fellman, R.

1979-02-01

The release of uranium hexafluoride and its hydrolysis products into the work environment of a plant for enriching uranium by means of gas centrifuges is discussed. The maximum permissible mass and curie concentration of airborne uranium (U) is identified as a function of the enrichment level (i.e., U-235/total U), and chemical and physical form. A discussion of the chemical and radiological toxicity of uranium as a function of enrichment and chemical form is included. The toxicity of products of UF 6 hydrolysis in the atmosphere, namely, UO 2 F 2 and HF, the particle size of toxic particulate material produced from this hydrolysis, and the toxic effects of HF and other potential fluoride compounds are also discussed. Results of an investigation of known effects of humidity and temperature on particle size of UO 2 F 2 produced by the reaction of UF 6 with water vapor in the air are reported. The relationship of the solubility of uranium compounds to their toxic effects was studied. Identification and discussion of the standards potentially applicable to airborne uranium compounds in the working environment are presented. The effectiveness of High Efficiency Particulate (HEPA) filters subjected to the corrosive environment imposed by the presence of hydrogen fluoride is discussed

High loading uranium plate

International Nuclear Information System (INIS)

Wiencek, T.C.; Domagala, R.F.; Thresh, H.R.

1990-01-01

Two embodiments of a high uranium fuel plate are disclosed which contain a meat comprising structured uranium compound confined between a pari of diffusion bonded ductile metal cladding plates uniformly covering the meat, the meat hiving a uniform high fuel loading comprising a content of uranium compound greater than about 45 Vol. % at a porosity not greater than about 10 Vol. %. In a first embodiment, the meat is a plurality of parallel wires of uranium compound. In a second embodiment, the meat is a dispersion compact containing uranium compound. The fuel plates are fabricated by a hot isostatic pressing process

The U.S. regulatory framework for long-term management of uranium mill tailings

International Nuclear Information System (INIS)

Smythe, C.; Bierley, D.; Bradshaw, M.

1995-01-01

The US established the regulatory structure for the management, disposal, and long-term care of uranium mill tailings in 1978 with the passage of the Uranium Mill Tailings Radiation Control Act (UMTRCA) (Pub. L. 95-604). This legislation has governed the cleanup and disposal of uranium tailings at both inactive and active sites. The passage of the UMTRCA established a federal regulatory program for the cleanup and disposal of uranium mill tailings in the US. This program involves the DOE, the NRC, the EPA, various states and tribal governments, private licensees, and the general public. The DOE has completed surface remediation at 14 sites, with the remaining sites either under construction or in planning. The DOE's UMTRA Project has been very successful in dealing with public and agency demands, particularly regarding disposal site selection and transportation issues. The active sites are also being cleaned up, but at a slower pace than the inactive sites, with the first site tentatively scheduled for completion in 1996

Lithium alkyl anions of uranium(IV) and uranium(V)

International Nuclear Information System (INIS)

Sigurdson, E.R.; Wilkinson, G.

1977-01-01

Organouranium compounds with six or eight uranium-to-carbon sigma-bonds have been synthesized for the first time. The interaction of uranium tetrachloride with lithium alkyls in diethyl ether leads to the isolation of unstable lithium alkyluranate(IV) compounds of stoicheiometry Li 2 UR 6 .8Et 2 0 (R = Me, CH 2 SiMe 3 . Ph, and o-Me 2 NCH 2 C 6 H 4 ). These lithium salts can also be obtained with other donor solvents, such as tetrahydrofuran or NNN'N'-tetramethylethylenediamine. From uranium pentaethoxide similar lithium salts of stoicheiometry Li 3 UR 8 .3 dioxan (R = Me, CH 2 CMe 3 , and CH 2 SiMe 3 ) can be obtained. The interaction of uranium(VI) hexaisopropoxide with lithium, magnesium, or aluminium alkyls does not give compounds containing U-C bonds, but green oils, e.g. U(OPrsup(i)) 6 (MgMe 2 ) 3 , that appear to be adducts in which the oxygen atom of the isopropoxide group bound to uranium is acting as a donor. I.r. and n.m.r. spectroscopy and analytical data for the new compounds are presented. (author)

Uranium resource technology, Seminar 3, 1980

International Nuclear Information System (INIS)

Morse, J.G.

1980-01-01

This conference proceedings contains 20 papers and 1 panel discussion on uranium mining and ore treatment, taking into account the environmental issues surrounding uranium supply. Topics discussed include: the US uranium resource base, the technology and economics of uranium recovery from phosphate resources, trends in preleash materials handling of sandstone uranium ores, groundwater restoration after in-situ uranium leaching, mitigation of the environmental impacts of open pit and underground uranium mining, remedial actions at inactive uranium mill tailings sites, environmental laws governing in-situ solution mining of uranium, and the economics of in-situ solution mining. 16 papers are indexed separately

Geochemical exploration for uranium

International Nuclear Information System (INIS)

1988-01-01

This Technical Report is designed mainly to introduce the methods and techniques of uranium geochemical exploration to exploration geologists who may not have had experience with geochemical exploration methods in their uranium programmes. The methods presented have been widely used in the uranium exploration industry for more than two decades. The intention has not been to produce an exhaustive, detailed manual, although detailed instructions are given for a field and laboratory data recording scheme and a satisfactory analytical method for the geochemical determination of uranium. Rather, the intention has been to introduce the concepts and methods of uranium exploration geochemistry in sufficient detail to guide the user in their effective use. Readers are advised to consult general references on geochemical exploration to increase their understanding of geochemical techniques for uranium

Uranium purchases report 1992

International Nuclear Information System (INIS)

1993-01-01

Data reported by domestic nuclear utility companies in their responses to the 1991 and 1992 ''Uranium Industry Annual Survey,'' Form EIA-858, Schedule B ''Uranium Marketing Activities,are provided in response to the requirements in the Energy Policy Act 1992. Data on utility uranium purchases and imports are shown on Table 1. Utility enrichment feed deliveries and secondary market acquisitions of uranium equivalent of US DOE separative work units are shown on Table 2. Appendix A contains a listing of firms that sold uranium to US utilities during 1992 under new domestic purchase contracts. Appendix B contains a similar listing of firms that sold uranium to US utilities during 1992 under new import purchase contracts. Appendix C contains an explanation of Form EIA-858 survey methodologies with emphasis on the processing of Schedule B data

Development of metallic uranium recovery technology from uranium oxide by Li reduction and electrorefining

International Nuclear Information System (INIS)

Tokiwai, Moriyasu; Kawabe, Akihiro; Yuda, Ryouichi; Usami, Tsuyoshi; Fujita, Reiko; Nakamura, Hitoshi; Yahata, Hidetsugu

2002-01-01

The purpose of the study is to develop technology for pre-treatment of oxide fuel reprocessing through pyroprocess. In the pre-treatment process, it is necessary to reduce actinide oxide to metallic form. This paper outlines some experimental results of uranium oxide reduction and recovery of refined metallic uranium in electrorefining. Both uranium oxide granules and pellets were used for the experiments. Uranium oxide granules was completely reduced by lithium in several hours at 650degC. Reduced uranium pellets by about 70% provided a simulation of partial reduction for the process flow design. Almost all adherent residues of Li and Li 2 O were successfully washed out with fresh LiCl salt. During electrorefining, metallic uranium deposited on the iron cathode as expected. The recovery efficiencies of metallic uranium from reduced uranium oxide granules and from pellets were about 90% and 50%, respectively. The mass balance data provided the technical bases of Li reduction and refining process flow for design. (author)

Best Practice in Environmental Management of Uranium Mining

International Nuclear Information System (INIS)

2010-01-01

The modern uranium mining industry was born in the middle of the 20th century at a time of rapid industrial and social change and in an atmosphere of concern over the development of nuclear weapons. At many uranium mining operations, the need to produce uranium far outweighed the need to ensure that there were any more than vestigial efforts made in protecting the workers, the public and the environment from the impacts of the mining, both radiological and non-radiological. In the last quarter of the 20th century, the world began to take greater care of the total environment with the introduction of legislation and the development of operating procedures that took environmental protection into account. The uranium mining industry was part of this change, and standards of environmental management began to become of significance in corporate planning strategies. However, by the 1980s, as uranium mining companies began to address the issues of environment protection, the industry began to suffer a cyclical slowdown. By the 1990s, the industry was at a nadir, but the surviving uranium producers continued to develop and implement a series of procedures in environmental management that were regarded as best practices. This, in part, was necessary as a means to demonstrate to the regulators, governments and the public that the mining operations were being run with the intention of minimizing adverse impacts on the workers, people and the environment. This ensured that mining would be allowed to continue. The decline in uranium mining activity bottomed out in the 1990s, but a resurgence of activity began in the new century that is likely to continue for some time. This has been, in part, due to market conditions and concerns about the shortfall of current production from primary sources (uranium mines) against current reactor fuel demands; the anticipated decrease in future availability of secondary sources such as stockpiles; and the increased interest in nuclear power

Uranium isotopic composition and uranium concentration in special reference material SRM A (uranium in KCl/LiCl salt matrix)

International Nuclear Information System (INIS)

Graczyk, D.G.; Essling, A.M.; Sabau, C.S.; Smith, F.P.; Bowers, D.L.; Ackerman, J.P.

1997-07-01

To help assure that analysis data of known quality will be produced in support of demonstration programs at the Fuel Conditioning Facility at Argonne National Laboratory-West (Idaho Falls, ID), a special reference material has been prepared and characterized. Designated SRM A, the material consists of individual units of LiCl/KCl eutectic salt containing a nominal concentration of 2.5 wt. % enriched uranium. Analyses were performed at Argonne National Laboratory-East (Argonne, IL) to determine the uniformity of the material and to establish reference values for the uranium concentration and uranium isotopic composition. Ten units from a batch of approximately 190 units were analyzed by the mass spectrometric isotope dilution technique to determine their uranium concentration. These measurements provided a mean value of 2.5058 ± 0.0052 wt. % U, where the uncertainty includes estimated limits to both random and systematic errors that might have affected the measurements. Evidence was found of a small, apparently random, non-uniformity in uranium content of the individual SRM A units, which exhibits a standard deviation of 0.078% of the mean uranium concentration. Isotopic analysis of the uranium from three units, by means of thermal ionization mass spectrometry with a special, internal-standard procedure, indicated that the uranium isotopy is uniform among the pellets with a composition corresponding to 0.1115 ± 0.0006 wt. % 234 U, 19.8336 ± 0.0059 wt. % 235 U, 0.1337 ± 0.0006 wt. % 236 U, and 79.9171 ± 0.0057 wt. % 238 U

Analysis of uranium intake, risk assessments uranium content in blood and urine

International Nuclear Information System (INIS)

Mukesh Kumar; Prasher, Sangeeta; Singh, Surinder

2015-01-01

Bathinda district of Punjab is in light since the last few years because of the high mortality rate due to cancer. In order to explore the possibility of uranium as one of the causes for cancer an attempt has been made to estimate the level of uranium in the environmental samples viz. soil, water, food items and to correlate it with that in the blood and urine of the cancer patients and the normal persons of the area. The fission track technique has been employed for such studies. Though the uranium content in soil is normal and close to the world average, the uranium values in most of the water samples exceed the recommended safe limits. The cancer risk estimate from drinking of uranium contaminated water during the life time of sixty year is very high. The daily intake of Uranium for the population of these villages including the drinking water has also been estimated using the daily intake of these foodstuffs recommended by WHO and is found to exceed the typical world wide dietary intake of 0.9-4.5 μg/day. The concentration of uranium in urine and blood is found higher in cancer patients, whereas the urine excretion of uranium is lower in the cancer patients compared to the normal persons. (author)

Corrosion resistant coatings for uranium and uranium alloys

International Nuclear Information System (INIS)

Weirick, L.J.; Lynch, C.T.

1977-01-01

Coatings to prevent the corrosion of uranium and uranium alloys are considered in two military applications: kinetic energy penetrators and aircraft counterweights. This study, which evaluated organic films and metallic coatings, demonstrated that the two most promising coatings are based on an electrodeposited nickel system and a galvanized zinc system

Swiss R and D on uranium-free LWR fuels for plutonium incineration

International Nuclear Information System (INIS)

Stanculescu, A.; Chawla, R.; Degueldre, C.; Kasemeyer, U.; Ledergerber, G.; Paratte, J.M.

1999-01-01

The most efficient way to enhance the plutonium consumption in LWRs is to eliminate plutonium production altogether. This requirement leads to fuel concepts in which the uranium is replaced by an inert matrix. The inert matrix material studied at PSI is zirconium oxide. For reactivity control reasons, adding a burnable poison to this fuel proves to be necessary. The studies performed at PSI have identified erbium oxide as the most suitable candidate for this purpose. With regard to material technology aspects, efforts have concentrated on the evaluation of fabrication feasibility and on the determination of the physicochemical properties of the chosen single phase zirconium/ erbium/plutonium oxide material stabilised as a cubic solution by yttrium. The results to-date, obtained for inert matrix samples containing thorium or cerium as plutonium substitute, confirm the robustness and stability of this material. With regard to reactor physics aspects, our studies indicate the feasibility of uranium-free, plutonium-fuelled cores having operational characteristics quite similar to those of conventional UO 2 -fuelled ones, and much higher plutonium consumption rates, as compared to 100% MOX loadings. The safety features of such cores, based on results obtained from static neutronics calculations, show no cliff edges. However, the need for further detailed transient analyses is clearly recognised. Summarising, PSI's studies indicate the feasibility of a uranium-free plutonium fuel to be considered in 'maximum plutonium consumption LWRs' operating in a 'once-through' mode. With regard to reactor physics, future efforts will concentrate on strengthening the safety case of uranium-free cores, as well as on improving the integral data base for validation of the neutronics calculations. Material technology studies will be continued to investigate the physico-chemical properties of the inert matrix fuel containing plutonium and will focus on the planning and evaluation of

Development of empirical relation for isotope of uranium in enriched uranium matrix

International Nuclear Information System (INIS)

Srivastava, S.K.; Vidyasagar, D.; Jha, S.K.; Tripathi, R.M.

2018-01-01

Uranium enriched in 235 U is required in commercial light water reactors to produce a controlled nuclear reaction. Enrichment allows the 235 U isotopes to be increased from 0.71% to a range between 2% to 5% depending upon requirement. The enriched uranium in the form of sintered UO 2 pellet is used for any commercially operating boiling light water reactors. The enriched uranium fuel bundle surface swipes sample is being analysed to assess the tramp uranium as a quality control parameter. It is known that the 234 U isotope also enriched along with 235 U isotope in conventional gaseous diffusion enrichment process. The information about enrichment percentage of 234 U helps to characterize isotopic properties of enriched uranium. A few reports provide the empirical equation and graphs for finding out the specific activity, activity percentage, activity ratio of 234 U isotopes for enriched uranium. Most of them have not provided the reference for the data used and their source. An attempt has been made to model the relationship between 234 U and 235 U as a function of uranium enrichment at low level

50 years of uranium metal production in Uranium Metal Plant, BARC, Trombay

International Nuclear Information System (INIS)

2009-01-01

The Atomic Energy Programme in India, from the very beginning, has laid emphasis on indigenous capabilities in all aspects of nuclear technology. This meant keeping pace with developments abroad and recognizing the potentials of indigenous technologies. With the development of nuclear programme in India, the importance of uranium was growing at a rapid pace. The production of reactor grade uranium in India started in January 1959 when the first ingot of nuclear pure uranium was discharged using CTR process at Trombay. The decision to set up a uranium refinery to purify the crude uranium fluoride, obtained as a by-product of the DAE's Thorium Plant at Trombay, and to produce nuclear grade pure uranium metal was taken at the end of 1956. The task was assigned to the 'Project Fire Wood Group'. The main objective of the plant was to produce pure uranium metal for use in the Canada India Reactor and Zerlina. Besides this, it was to function as a pilot plant to collect operational data and to train personnel for larger plants to be set up in future. The plant designing and erection work was entrusted to Messrs. Indian Rare Earths Ltd.

World uranium resources

International Nuclear Information System (INIS)

Deffeyes, K.S.; MacGregor, I.D.

1980-01-01

To estimate the total resource availability of uranium, the authors' approach has been to ask whether the distribution of uranium in the earth's crust can be reasonably approximated by a bell-shaped log-normal curve. In addition they have asked whether the uranium deposits actually mined appear to be a portion of the high-grade tail, or ascending slope, of the distribution. This approach preserves what they feel are the two most important guiding principles of Hubbert's work, for petroleum, namely recognizing the geological framework that contains the deposits of interest and examining the industry's historical record of discovering those deposits. Their findings, published recently in the form of a book-length report prepared for the US Department of Energy, suggest that for uranium the crustal-distribution model and the mining-history model can be brought together in a consistent picture. In brief, they conclude that both sets of data can be described by a single log-normal curve, the smoothly ascending slope of which indicates approximately a 300-fold increase in the amount of uranium recoverable for each tenfold decrease in ore grade. This conclusion has important implications for the future availability of uranium. They hasten to add, however, that this is only an approximative argument; no rigorous statistical basis exists for expecting a log-normal distribution. They continue, pointing out the enormously complex range of geochemical behavior of uranium - and its wide variety of different binds of economic deposit. Their case study, supported by US mining records, indicates that the supply of uranium will not be a limiting factor in the development of nuclear power

Uranium deposits in granitic rocks

International Nuclear Information System (INIS)

Nishimori, R.K.; Ragland, P.C.; Rogers, J.J.W.; Greenberg, J.K.

1977-01-01

This report is a review of published data bearing on the geology and origin of uranium deposits in granitic, pegmatitic and migmatitic rocks with the aim of assisting in the development of predictive criteria for the search for similar deposits in the U.S. Efforts were concentrated on the so-called ''porphyry'' uranium deposits. Two types of uranium deposits are primarily considered: deposits in pegmatites and alaskites in gneiss terrains, and disseminations of uranium in high-level granites. In Chapter 1 of this report, the general data on the distribution of uranium in igneous and metamorphic rocks are reviewed. Chapter 2 contains some comments on the classification of uranium deposits associated with igneous rocks and a summary of the main features of the geology of uranium deposits in granites. General concepts of the behavior of uranium in granites during crustal evolution are reviewed in Chapter 3. Also included is a discussion of the relationship of uranium mineralization in granites to the general evolution of mobile belts, plus the influence of magmatic and post-magmatic processes on the distribution of uranium in igneous rocks and related ore deposits. Chapter 4 relates the results of experimental studies on the crystallization of granites to some of the geologic features of uranium deposits in pegmatites and alaskites in high-grade metamorphic terrains. Potential or favorable areas for igneous uranium deposits in the U.S.A. are delineated in Chapter 5. Data on the geology of specific uranium deposits in granitic rocks are contained in Appendix 1. A compilation of igneous rock formations containing greater than 10 ppM uranium is included in Appendix 2. Appendix 3 is a report on the results of a visit to the Roessing area. Appendix 4 is a report on a field excursion to eastern Canada

Uranium resources in New Mexico

International Nuclear Information System (INIS)

McLemore, V.T.; Chenoweth, W.L.

1989-01-01

For nearly three decades (1951-1980), the Grants uranium district in northwestern New Mexico produced more uranium than any other district in the world. The most important host rocks containing economic uranium deposits in New Mexico are sandstones within the Jurassic Morrison Formation. Approximately 334,506,000 lb of U 3 O 8 were produced from this unit from 1948 through 1987, accounting for 38% of the total uranium production from the US. All of the economic reserves and most of the resources in New Mexico occur in the Morrison Formation. Uranium deposits also occur in sandstones of Paleozoic, Triassic, Cretaceous, Tertiary, and Quaternary formations; however, only 468,680 lb of U 3 O 8 or 0.14% of the total production from New Mexico have been produced from these deposits. Some of these deposits may have a high resource potential. In contrast, almost 6.7 million lb of U 3 O 8 have been produced from uranium deposits in the Todilto Limestone of the Wanakah Formation (Jurassic), but potential for finding additional economic uranium deposits in the near future is low. Other uranium deposits in New Mexico include those in other sedimentary rocks, vein-type uranium deposits, and disseminated magmatic, pegmatitic, and contact metasomatic uranium deposits in igneous and metamorphic rocks. Production from these deposits have been insignificant (less than 0.08% of the total production from New Mexico), but there could be potential for medium to high-grade, medium-sized uranium deposits in some areas. Total uranium production from New Mexico from 1948 to 1987 amounts to approximately 341,808,000 lb of U 3 O 8 . New Mexico has significant uranium reserves and resources. Future development of these deposits will depend upon an increase in price for uranium and lowering of production costs, perhaps by in-situ leaching techniques

Preparation of electrodeless discharge lamps for emission studies of uranium isotopes at trace level

International Nuclear Information System (INIS)

Bhowmick, G.K.; Verma, R.; Verma, M.K.; Raman, V.A.; Joshi, A.R.; Deo, M.N.; Gantayet, L.M.; Tiwari, A.K.; Ramakumar, K.L.; Kumar, Navin

2010-01-01

A simplified method for preparation of electrodeless discharge lamp for uranium isotopes with specific concerns for 232 U is described. Micro-gram quantities of solid uranium oxides and aqueous solution of uranium nitrate have been used as a starting material for in situ synthesis of uranium tetraiodide. High temperature iodination reaction is carried out in the presence of inert gas neon. By careful design, the preparation time and surface area of quartz reaction tubes have been reduced considerably. The latter decreases the level of contamination which has a direct bearing on the operational lifetime of the lamps. Incorporation of steps to purify the product from an unwanted material improved the stability of the lamps. The procedure provides a safe and convenient way of handling 232 U in particular but can be extended in general to any actinides having radioactivity similar to that of freshly separated 232 U. Characteristic emission of uranium isotopes have been recorded by Fourier Transform Spectrometer to show the satisfactory operation of the lamps as well as their usage for studying emission spectra of the specific isotope.

Uranium enrichment by laser: a technology for the future

International Nuclear Information System (INIS)

Cazalet, J.

1999-01-01

The SILVA (Isotopic Separation by Laser on atomic Vapor of uranium) process, developed by CEA and COGEMA, is an innovative system of production of enriched uranium, to be used as the fuel of nuclear reactors. It is a sound research program, calling on advanced technologies that are quickly changing. The goal is to cut drastically the production cost in comparison with the operating cost of the present plants based on gaseous diffusion. its industrialization is forecast for the beginning of next century. The SILVA process consists in putting a vapor of uranium through a beam of photons emitted by finely tuned lasers capable of ionising selectively the isotopes 235. The ionised isotopes are attracted on plates by an electric field, they are condensed and collected on these plates. The very high selectivity of enrichment technologies by laser, which are quite new, pave the way for compact and modular plants, which will consume little energy. Accordingly their production cost will be very low. So a new process could take a significant part of the uranium enrichment market after 2010. Even if the multinational EURODIF gaseous diffusion plant is modern and performing, it will be necessary to strengthen the French industry of uranium enrichment to maintain or improve its competitive position on the world market. This could be achieved by smoothly replacing EURODIF by a high performance laser plant. This is the common goal of CEA and COGEMA: all the efforts are concentrated on SILVA, the qualities of which (high selectivity, separation in one single step) have been demonstrated in the facilities of Saclay and Pierrelatte. 400 researchers and technicians are involved, as well as many industrial firms. The budget is equally by CEA and COGEMA through a cooperation agreement. The program includes: a phase of scientific and technical research, which has been highlighted in 1997-1998 by a demonstration of feasibility of the process; a phase of technological development, with

Activity concentration of uranium in groundwater from uranium mineralized areas and its neighborhood

International Nuclear Information System (INIS)

Arabi, S.A.; Funtua, I.I.; Dewu, B.B.M.; Alagbe, S.A.; Garba, M.L.; Kwaya, M.Y.; Baloga, A.D.

2013-01-01

Uranium mineralization in parts of northeastern Nigeria necessitated its exploration during early eighties by the Nigeria Uranium Mining Company (NUMCO) which was later abandoned. During their course of decay, uranium isotopes pass through radioactive decay stage and eventually into stable isotope of lead. The course of concern for soluble uranium in groundwater especially from the mineralized areas include ionizing radiation, chemical toxicity and reproductive defects for which ingested uranium has been implicated to have caused. This study is aimed at assessing the levels of concentration of uranium in groundwater to ascertain its compliance with the World Health Organization's (WHO) and the United State Environmental Protection Agency's (EPA) guideline for uranium in drinking water. Thirty five groundwater samples were collected using EPA's groundwater sampling protocol and analyzed at the Department of Geology, University of Cape Town using an Inductively Coupled Plasma Mass Spectrometric (ICP-MS) technique. Significant finding of this work was that there is radiological contamination of groundwater in the area. There is also an indication that the extent of radiological contamination is not much within the mineralized zones, therefore, there is likelihood that groundwater has acted as a medium of transporting and enhancing uranium in groundwater in an environment away from that of origin. About 5.7 % of the samples studied had uranium concentration above WHO and EPA's maximum contaminant level of 30 μg/L which is a major concern for inhabitants of the area. It was also apparent that radiological contamination at the southwestern part of the study area extends into the adjacent sheet (sheet 152). Uranium concentration above set standards in those areas might have originated from rocks around established mineralized zones but was transported to those contaminated areas by groundwater that leaches across the host rock and subsequently mobilizing soluble uranium

Mechanical behaviour of uranium; Comportement mecanique de l'uranium

Energy Technology Data Exchange (ETDEWEB)

Bernard, J L; Coureau, G [Commissariat a l' Energie Atomique, Dir. Industrielle, Saclay (France). Centre d' Etudes Nucleaires

1957-07-01

The chief mechanical properties of uranium, taken at room and at different temperatures, are presented in this report. (author) [French] Dans ce rapport sont presentees les principales caracteristiques mecaniques de l'uranium, relevees a l'ambiante et a differentes temperatures. (auteur)

Recovery of uranium by chlorination

International Nuclear Information System (INIS)

Komoto, Shigetoshi; Taki, Tomihiro

1988-01-01

The recovery of uranium from uraniferous phosphate by conventional process is generally uneconomic, except that uranium is recovered as a by-product. If an economical process by which uranium is recovered efficiently as a chief product is discovered, uraniferous phosphate will be used effectively as uranium ore. By using chiorination which will be expected to be favorable in comparison with conventional process, the recovery of uranium from uraniferous phosphate has been carried out. The paper describes the reaction machanism and general characteristics of the uranium chiorination, and the research done so for. (author)

The uranium equation in 1982

International Nuclear Information System (INIS)

Bonny, J.; Fulton, M.

1983-01-01

The subject is discussed under the headings: comparison of world nuclear generating capacity forecasts; world uranium requirements; comparison of uranium production capability forecasts; supply and demand situation in 1990 and 1995; a perspective on the uranium equation (economic factors; development lead times as a factor affecting market stability; the influence of uncertainty; the uranium market in perspective; the uranium market in 1995). (U.K.)

Strong demand for natural uranium

International Nuclear Information System (INIS)

Kalinowski, P.

1975-01-01

The Deutsches Atomforum and the task group 'fuel elements' of the Kerntechnische Gesellschaft had organized an international two-day symposium in Mainz on natural uranium supply which was attended by 250 experts from 20 countries. The four main themes were: Demand for natural uranium, uranium deposits and uranium production, attitude of the uranium producing countries, and energy policy of the industrial nations. (orig./AK) [de

Sensibility test for uranium ores from Qianjiadian sandstone type uranium deposit

International Nuclear Information System (INIS)

Zhang Mingyu

2005-01-01

Sensibility tests for uranium ores from Qianjiadian sandstone type uranium deposit in Songliao Basin which is suitable to in-situ leach are carried out, including water sensibility, velocity sensibility, salt sensibility, acid sensibility and alkaline sensibility. The sensibility critical value of this ore is determined. Some references on mining process and technical parameter are provided for in-situ leaching of uranium. (authors)

Drawing of uranium in {gamma} phase; Filage de l'uranium en phase gamma

Energy Technology Data Exchange (ETDEWEB)

Stohr, J A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Chevigny, R [Conpagnie, Pechiney, 73 - Chambery (France)

1955-07-01

It describes the study of working and drawing of uranium in {gamma} phase. In a first part, the forgeable characteristics of uranium metal in the three different phases ({alpha}, {beta} and {gamma}) are compared by using BASTIEN-PORTEVIN method. The different experiments are testing the behaviour metal in each phase under different stresses and a temperature gradient as slow and shock traction, slow and shock compression, resilience, flexibility. Results show that optimum conditions for uranium drawing is uranium in phase {gamma}. In a second part, it described the drawing method and process. The uranium rods obtained by this technique are of very good quality. In addition, the material wear is very low which permits a low production cost. Finally, the uranium rod physical properties are studied. (M.P.)

Uranium supply/demand projections to 2030 in the OECD/NEA-IAEA ''Red Book''. Nuclear growth projections, global uranium exploration, uranium resources, uranium production and production capacity

International Nuclear Information System (INIS)

Vance, Robert

2009-01-01

World demand for electricity is expected to continue to grow rapidly over the next several decades to meet the needs of an increasing population and economic growth. The recognition by many governments that nuclear power can produce competitively priced, base load electricity that is essentially free of greenhouse gas emissions, combined with the role that nuclear can play in enhancing security of energy supplies, has increased the prospects for growth in nuclear generating capacity. Since the mid-1960s, with the co-operation of their member countries and states, the OECD Nuclear Energy Agency (NEA) and the International Atomic Energy Agency (IAEA) have jointly prepared periodic updates (currently every 2 years) on world uranium resources, production and demand. These updates have been published by the OECD/NEA in what is commonly known as the ''Red Book''. The 2007 edition replaces the 2005 edition and reflects information current as of 1 st January 2007. Uranium 2007: Resources, Production and Demand presents, in addition to updated resource figures, the results of a recent review of world uranium market fundamentals and provides a statistical profile of the world uranium industry. It contains official data provided by 40 countries (and one Country Report prepared by the IAEA Secretariat) on uranium exploration, resources, production and reactor-related requirements. Projections of nuclear generating capacity and reactor-related uranium requirements to 2030 as well as a discussion of long-term uranium supply and demand issues are also presented. (orig.)

Uranium production from phosphates

International Nuclear Information System (INIS)

Ketzinel, Z.; Folkman, Y.

1979-05-01

According to estimates of the world's uranium consumption, exploitation of most rich sources is expected by the 1980's. Forecasts show that the rate of uranium consumption will increase towards the end of the century. It is therefore desirable to exploit poor sources not yet in use. In the near future, the most reasonable source for developing uranium is phosphate rock. Uranium reserves in phosphates are estimated at a few million tons. Production of uranium from phosphates is as a by-product of phosphate rock processing and phosphoric acid production; it will then be possible to save the costs incurred in crushing and dissolving the rock when calculating uranium production costs. Estimates show that the U.S. wastes about 3,000 tons of uranium per annum in phosphoric acid based fertilisers. Studies have also been carried out in France, Yugoslavia and India. In Israel, during the 1950's, a small plant was operated in Haifa by 'Chemical and Phosphates'. Uranium processes have also been developed by linking with the extraction processes at Arad. Currently there is almost no activity on this subject because there are no large phosphoric acid plants which would enable production to take place on a reasonable scale. Discussions are taking place about the installation of a plant for phosphoric acid production utilising the 'wet process', producing 200 to 250,000 tons P 2 O 5 per annum. It is necessary to combine these facilities with uranium production plant. (author)

Vein-type uranium deposits

International Nuclear Information System (INIS)

Rich, R.A.; Holland, H.D.; Petersen, U.

1975-01-01

A critical review is presented of published data bearing on the mineralogy, paragenesis, geochemistry, and origin of veiw-type uranium deposits. Its aim is to serve as a starting point for new research and as a basis for the development of new exploration strategies. During the formation of both vein and sandstone types of deposits uranium seems to have been dissolved by and transported in rather oxidized solutions, and deposited where these solutions encountered reducing agents such as carbon, sulfides, ferrous minerals and hydrocarbons. Granitic rocks abnormally enriched in uranium have apparently been the most common source for uranium in vein-type deposits. Oxidizing solutions have been derived either from the surface or from depth. Surface solutions saturated with atmospheric oxygen have frequently passed through red bed or clean sandstone conduits on their way to and from uranium source rocks. Deep solutions of non-surface origin have apparently become sufficiently oxidizing by passage through and equilibration with red beds. The common association of clean sandstones or red beds with uranium-rich granites in the vicinity of vein-type uranium deposits is probably not fortuitous, and areas where these rock types are found together are considered particularly favorable targets for uranium exploration

Strengthening Emergency Care Systems to Mitigate Public Health Challenges Arising from Influxes of Individuals with Different Socio-Cultural Backgrounds to a Level One Emergency Center in South East Europe.

Science.gov (United States)

Twomey, Michèle; Šijački, Ana; Krummrey, Gert; Welzel, Tyson; Exadaktylos, Aristomenis K; Ercegovac, Marko

2018-03-12

Emergency center visits are mostly unscheduled, undifferentiated, and unpredictable. A standardized triage process is an opportunity to obtain real-time data that paints a picture of the variation in acuity found in emergency centers. This is particularly pertinent as the influx of people seeking asylum or in transit mostly present with emergency care needs or first seek help at an emergency center. Triage not only reduces the risk of missing or losing a patient that may be deteriorating in the waiting room but also enables a time-critical response in the emergency care service provision. As part of a joint emergency care system strengthening and patient safety initiative, the Serbian Ministry of Health in collaboration with the Centre of Excellence in Emergency Medicine (CEEM) introduced a standardized triage process at the Clinical Centre of Serbia (CCS). This paper describes four crucial stages that were considered for the integration of a standardized triage process into acute care pathways.

Strengthening Emergency Care Systems to Mitigate Public Health Challenges Arising from Influxes of Individuals with Different Socio-Cultural Backgrounds to a Level One Emergency Center in South East Europe

Directory of Open Access Journals (Sweden)

Michèle Twomey

2018-03-01

Full Text Available Emergency center visits are mostly unscheduled, undifferentiated, and unpredictable. A standardized triage process is an opportunity to obtain real-time data that paints a picture of the variation in acuity found in emergency centers. This is particularly pertinent as the influx of people seeking asylum or in transit mostly present with emergency care needs or first seek help at an emergency center. Triage not only reduces the risk of missing or losing a patient that may be deteriorating in the waiting room but also enables a time-critical response in the emergency care service provision. As part of a joint emergency care system strengthening and patient safety initiative, the Serbian Ministry of Health in collaboration with the Centre of Excellence in Emergency Medicine (CEEM introduced a standardized triage process at the Clinical Centre of Serbia (CCS. This paper describes four crucial stages that were considered for the integration of a standardized triage process into acute care pathways.

PROCESS OF RECOVERING URANIUM

Science.gov (United States)

Carter, J.M.; Larson, C.E.

1958-10-01

A process is presented for recovering uranium values from calutron deposits. The process consists in treating such deposits to produce an oxidlzed acidic solution containing uranium together with the following imparities: Cu, Fe, Cr, Ni, Mn, Zn. The uranium is recovered from such an impurity-bearing solution by adjusting the pH of the solution to the range 1.5 to 3.0 and then treating the solution with hydrogen peroxide. This results in the precipitation of uranium peroxide which is substantially free of the metal impurities in the solution. The peroxide precipitate is then separated from the solution, washed, and calcined to produce uranium trioxide.

Uranium mining in Australia

International Nuclear Information System (INIS)

Mackay, G.A.

1978-01-01

Western world requirements for uranium based on increasing energy consumption and a changing energy mix, will warrant the development of Australia's resources. By 1985 Australian mines could be producing 9500 tonnes of uranium oxide yearly and by 1995 the export value from uranium could reach that from wool. In terms of benefit to the community the economic rewards are considerable but, in terms of providing energy to the world, Australias uranium is vital

Uranium in fossil bones

International Nuclear Information System (INIS)

Koul, S.L.

1978-01-01

An attempt has been made to determine the uranium content and thus the age of certain fossil bones Haritalyangarh (Himachal Pradesh), India. The results indicate that bones rich in apatite are also rich in uranium, and that the radioactivity is due to radionuclides in the uranium series. The larger animals apparently have a higher concentration of uranium than the small. The dating of a fossil jaw (elephant) places it in the Pleistocene. (Auth.)

The Toxicity of Depleted Uranium

Directory of Open Access Journals (Sweden)

Wayne Briner

2010-01-01

Full Text Available Depleted uranium (DU is an emerging environmental pollutant that is introduced into the environment primarily by military activity. While depleted uranium is less radioactive than natural uranium, it still retains all the chemical toxicity associated with the original element. In large doses the kidney is the target organ for the acute chemical toxicity of this metal, producing potentially lethal tubular necrosis. In contrast, chronic low dose exposure to depleted uranium may not produce a clear and defined set of symptoms. Chronic low-dose, or subacute, exposure to depleted uranium alters the appearance of milestones in developing organisms. Adult animals that were exposed to depleted uranium during development display persistent alterations in behavior, even after cessation of depleted uranium exposure. Adult animals exposed to depleted uranium demonstrate altered behaviors and a variety of alterations to brain chemistry. Despite its reduced level of radioactivity evidence continues to accumulate that depleted uranium, if ingested, may pose a radiologic hazard. The current state of knowledge concerning DU is discussed.

Microbial bioremediation of Uranium: an overview

International Nuclear Information System (INIS)

Acharya, Celin

2015-01-01

Uranium contamination is a worldwide problem. Preventing uranium contamination in the environment is quite challenging and requires a thorough understanding of the microbiological, ecological and biogeochemical features of the contaminated sites. Bioremediation of uranium is largely dependent on reducing its bioavailability in the environment. In situ bioremediation of uranium by microbial processes has been shown to be effective for immobilizing uranium in contaminated sites. Such microbial processes are important components of biogeochemical cycles and regulate the mobility and fate of uranium in the environment. It is therefore vital to advance our understanding of the uranium-microbe interactions to develop suitable bioremediation strategies for uranium contaminated sites. This article focuses on the fundamental mechanisms adopted by various microbes to mitigate uranium toxicity which could be utilized for developing various approaches for uranium bioremediation. (author)

Uranium and the fast reactor

International Nuclear Information System (INIS)

Price, T.

1982-01-01

The influence of uranium availability upon the future of the fast reactor is reviewed. The important issues considered are uranium reserves and resources, uranium market prices, fast reactor economics and the political availability of uranium to customers in other countries. (U.K.)

Uranium Processing Research in Australia [Processing of Low-Grade Uranium Ores

Energy Technology Data Exchange (ETDEWEB)

Stewart, J R [Australian Atomic Energy Commission, Coogee, N.S.W. (Australia)

1967-06-15

Uranium processing research in Australia has included studies of flotation, magnetic separation, gravity separation, heavy medium separation, atmospheric leaching, multi-stage leaching, alkali leaching, solar heating of leach pulps, jigged-bed resin-in-pulp and solvent-in-pulp extraction. Brief details of the results obtained are given. In general, it can be said that gravity, magnetic and flotation methods are of limited usefulness in the treatment of Australian uranium ores. Alkali leaching seldom gives satisfactory recoveries and multi-stage leaching is expensive. Jigged-bed resin-in-pulp and packed tower solvent-in-pulp extraction systems both show promise, but plant-scale development work is required. Bacterial leaching may be useful in the case of certain low-grade ores. The main difficulties to be overcome, either singly or in combination, in the case of Australian uranium ores not currently considered economically exploitable, are the extremely finely divided state of the uranium mineral, the refractory nature of the uranium mineral and adverse effects due to the gangue minerals present. With respect to known low-grade ores, it would be possible in only a few cases to achieve satisfactory recovery of uranium at reasonable cost by standard treatment methods. (author)

Vaal Reefs South uranium plant

International Nuclear Information System (INIS)

Anon.

1979-01-01

The Vaal Reefs mining complex, part of the Anglo American Corporation, is the largest gold and uranium producing complex in the world, being South Africa's principal producer, accounting for about a quarter of the country's uranium production. Vaal Reefs South uranium plant in the Orkney district was recently officially opened by Dr AJA Roux, the retiring president of the Atomic Energy Board and chairman of the Uranium Enrichment Corporation and will increase the country's uranium production. In the field of technology, and particularly processing technology, South Africa has shown the world unprecedented technology achievement in the field of uranium extraction from low grade ores and the development of the unique uranium enrichment process. New technical innovations that have been incorporated in this new plant are discussed

Uranium recovery from AVLIS slag

International Nuclear Information System (INIS)

D'Agostino, A.E.; Mycroft, J.R.; Oliver, A.J.; Schneider, P.G.; Richardson, K.L.

2000-01-01

Uranium metal for the Atomic Vapor Laser Isotope Separation (AVLIS) project was to have been produced by the magnesiothermic reduction of uranium tetrafluoride. The other product from this reaction is a magnesium fluoride slag, which contains fine and entrained natural uranium as metal and oxide. Recovery of the uranium through conventional mill leaching would not give a magnesium residue free of uranium but to achieve more complete uranium recovery requires the destruction of the magnesium fluoride matrix and liberation of the entrapped uranium. Alternate methods of carrying out such treatments and the potential for recovery of other valuable byproducts were examined. Based on the process flowsheets, a number of economic assessments were performed, conclusions were drawn and the preferred processing alternatives were identified. (author)

Diurnal urinary volume and uranium output in uranium workers and unexposed controls

International Nuclear Information System (INIS)

Medley, D.W.; Kathren, R.L.; Miller, A.G.

1994-01-01

Volume and uranium content were determined in individual urine voids over a 76-h (3.25-d) period from six unexposed normal male subjects and three male uranium workers. Uranium analyses were accomplished by a newly developed high-precision kinetic phosphorescence analysis technique with a lower level of detection of 0.007 ng mL -1 . Urinary uranium concentrations in individual voids varied by a factor of 2 or less for any one unexposed subject, although there was an order of magnitude variation among the group of unexposed men. The fractional urinary volume excreted in the open-quotes standardclose quotes so-called simulated 24-h sample was the same for both the unexposed and exposed groups and averaged 0.42 ± 0.13 of the total daily urine volume. The fraction of uranium in the simulated 24-h samples was 0.43 ± 0.15 in the unexposed group but only 0.31 ± 0.13 in the uranium worker group, suggesting that the use of the simulated 24-h urine sample would underestimate the total daily urinary uranium output by approximately a factor of 2 in the uranium workers. Daily urinary excretion relative to intake from drinking water (essentially equal to the gastrointestinal uptake fraction) among the unexposed group ranged from 0.002-0.028, averaging 0.011 ± 0.008, with an indication that the gastrointestinal uptake factor was inversely proportional to total intake via drinking water. 11 refs., 1 fig., 6 tabs

Epidemiology of ebolavirus disease (EVD) and occupational EVD in health care workers in Sub-Saharan Africa: Need for strengthened public health preparedness.

Science.gov (United States)

Ngatu, Nlandu Roger; Kayembe, Ntumba Jean-Marie; Phillips, Elayne Kornblatt; Okech-Ojony, Joa; Patou-Musumari, Masika; Gaspard-Kibukusa, Mukunda; Madone-Mandina, Ndona; Godefroid-Mayala, Mabasi; Mutaawe, Lubogo; Manzengo, Casimir; Roger-Wumba, Dimosi; Nojima, Sayumi

2017-10-01

Ebolavirus disease (EVD) is a severe contagious disease in humans, and health care workers (HCW) are at risk of infection when caring for EVD patients. This paper highlights the epidemiologic profile of EVD and its impact on the health care workforce in Africa. A documentary study was conducted which consisted of a review of available literature regarding the epidemiology of EVD, occupational EVD (OEVD), and work safety issues in Sub-Saharan Africa; the literature findings are enriched by field experiences from the authors. EVD outbreaks have already caused 30,500 cases in humans of whom 12,933 died (as of September 9, 2015), and the number of infected HCW has dramatically increased. All eight HCW infected during the 2014 outbreak in Democratic Republic of the Congo died, whereas during the recent West African EVD epidemic more than 890 HCW were infected, with a case fatality rate of 57%. Occupational exposure to blood and other body fluids due to inadequate use of personal protective equipment and needle stick or sharp injuries are among factors that contribute to the occurrence of OEVD. Prevention of OEVD should be one of the top priorities in EVD outbreak preparedness and management, and research should be conducted to elucidate occupational and other factors that expose HCW to EVD. In addition to regularly training HCW to be adequately prepared to care for patients with EVD, it is critical to strengthen the general health care system and improve occupational safety in medical settings of countries at risk. Copyright © 2017 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

Flotation of uranium from uranium ores in Canada. Part 1

International Nuclear Information System (INIS)

Muthuswami, S.V.; Vigayan, S.; Woods, D.R.; Banerjee, S.

1983-01-01

About 150 flotation tests were done on Elliot Lake ore with 15 reagents as collectors in order to screen and choose an attractive collector for uranium flotation. Several variables were studied including pH, conditioning time and mode of collector addition. The tests were done in a Denver or Agitair subaeration cell. The particle size of the ore was kept at 85% below -325 mesh. Three reagents (Kelex 00, TOPO, and cupferron) were identified as having the most promise. The best results were obtained with cupferron, where 93-95% of the uranium was recovered in 25-30% of the mass of original ore. Radium in the tails varied between 5 and 30 pCi/g depending on the mass of uranium floated. Radium was recovered in proportion to uranium in the tests done at neutral pH. The preconcentration results obtained by flotation alone were comparable to those obtained using pyrite flotation and wet high-intensity magnetic separation of uranium. The consumption of cupferron was 4 kg/Mg ore for each flotation stage. This was 10-15 times larger than the collector usage in conventional oxide flotation. This scheme did not require other reagents as depressants, activators or modifiers. Reproducibility was good and similar recoveries were obtained with fresh or old ores, and with distilled or mine water. The selectivity of cupferron for uranium in the ore studied was outstanding

Process for electrolytically preparing uranium metal

Science.gov (United States)

Haas, Paul A.

1989-01-01

A process for making uranium metal from uranium oxide by first fluorinating uranium oxide to form uranium tetrafluoride and next electrolytically reducing the uranium tetrafluoride with a carbon anode to form uranium metal and CF.sub.4. The CF.sub.4 is reused in the fluorination reaction rather than being disposed of as a hazardous waste.

Study of uranium plating measurement

International Nuclear Information System (INIS)

Lin Jufang; Wen Zhongwei; Wang Mei; Wang Dalun; Liu Rong; Jiang Li; Lu Xinxin

2007-06-01

In neutron physics experiments, the measurement for plate-thickness of uranium can directly affect uncertainties of experiment results. To measure the plate-thickness of transform target (enriched uranium plating and depleted uranium plating), the back to back ionization chamber, small solid angle device and Au-Si surface barrier semi-conductor, were used in the experiment study. Also, the uncertainties in the experiment were analyzed. Because the inhomo-geneous of uranium lay of plate can quantitively affect the result, the homogeneity of uranium lay is checked, the experiment result reflects the homogeneity of uranium lay is good. (authors)

Uranium-series disequilibria as a means to study recent migration of uranium in a sandstone-hosted uranium deposit, NW China

International Nuclear Information System (INIS)

Min Maozhong; Peng Xinjian; Wang Jinping; Osmond, J.K.

2005-01-01

Uranium concentration and alpha specific activities of uranium decay series nuclides 234 U, 238 U, 230 Th, 232 Th and 226 Ra were measured for 16 oxidized host sandstone samples, 36 oxic-anoxic (mineralized) sandstone samples and three unaltered primary sandstone samples collected from the Shihongtan deposit. The results show that most of the ores and host sandstones have close to secular equilibrium alpha activity ratios for 234 U/ 238 U, 230 Th/ 238 U, 230 Th/ 234 U and 226 Ra/ 230 Th, indicating that intensive groundwater-rock/ore interaction and uranium migration have not taken place in the deposit during the last 1.0 Ma. However, some of the old uranium ore bodies have locally undergone leaching in the oxidizing environment during the past 300 ka to 1.0 Ma or to the present, and a number of new U ore bodies have grown in the oxic-anoxic transition (mineralized) subzone during the past 1.0 Ma. Locally, uranium leaching has taken place during the past 300 ka to 1.0 Ma, and perhaps is still going on now in some sandstones of the oxidizing subzone. However, uranium accumulation has locally occurred in some sandstones of the oxidizing environment during the past 1 ka to 1.0 Ma, which may be attributed to adsorption of U(VI) by clays contained in oxidized sandstones. A recent accumulation of uranium has locally taken place within the unaltered sandstones of the primary subzone close to the oxic-anoxic transition environment during the past 300 ka to 1.0 Ma. Results from the present study also indicate that uranium-series disequilibrium is an important tool to trace recent migration of uranium occurring in sandstone-hosted U deposits during the past 1.0 Ma and to distinguish the oxidation-reduction boundary

Aftermath of Uranium Ore Processing on Floodplains: Lasting Effects of Uranium on Soil and Microbes

Science.gov (United States)

Tang, H.; Boye, K.; Bargar, J.; Fendorf, S. E.

2016-12-01

A former uranium ore processing site located between the Wind River and the Little Wind River near the city of Riverton, Wyoming, has generated a uranium plume in the groundwater within the floodplain. Uranium is toxic and poses a threat to human health. Thus, controlling and containing the spread of uranium will benefit the human population. The primary source of uranium was removed from the processing site, but a uranium plume still exists in the groundwater. Uranium in its reduced form is relatively insoluble in water and therefore is retained in organic rich, anoxic layers in the subsurface. However, with the aid of microbes uranium becomes soluble in water which could expose people and the environment to this toxin, if it enters the groundwater and ultimately the river. In order to better understand the mechanisms controlling uranium behavior in the floodplains, we examined sediments from three sediment cores (soil surface to aquifer). We determined the soil elemental concentrations and measured microbial activity through the use of several instruments (e.g. Elemental Analyzer, X-ray Fluorescence, MicroResp System). Through the data collected, we aim to obtain a better understanding of how the interaction of geochemical factors and microbial metabolism affect uranium mobility. This knowledge will inform models used to predict uranium behavior in response to land use or climate change in floodplain environments.

Uranium extraction history using pressure leaching

International Nuclear Information System (INIS)

Fraser, K.S.; Thomas, K.G.

2010-01-01

Over the past 60 years of uranium process development only a few commercial uranium plants have adopted a pressure leaching process in their flowsheet. The selection of acid versus alkaline pressure leaching is related to the uranium and gangue mineralogy. Tetravalent (U"+"4) uranium has to be oxidized to hexavalent (U"+"6) uranium to be soluble. Refractory tetravalent uranium requires higher temperature and pressure, as practised in pressure leaching, for conversation to soluble hexavalent uranium. This paper chronicles the history of these uranium pressure leaching facilities over the past 60 years, with specific details of each design and operation. (author)

REE characteristics and uranium metallogenesis of sandstone-type uranium deposits in northern Sichuan

International Nuclear Information System (INIS)

Zhu Xiyang; Wang Yunliang; Wang Zhichang; Zhang Chengjiang

2004-01-01

On the basis of the analysis of a large number of samples at sandstone-type uranium deposits in northern Sichuan, this paper analyses the REE composition of country rocks, ores, calcite-veins and uranium minerals, and systematically summarizes their REE geochemical characteristics, and discusses variation regularity of REE during depositional and diagenetic processes. By comparing these characteristics with those of typical hydrothermal volcanics-type and metamorphic rock type uranium deposits both at home and abroad, authors suggest that sandstone-type uranium deposits in northern Sichuan are characterized by REE geochemical features of hydrothermal reworking metallogenesis, the uranium mineralization has experienced two stages: the diagenetic preconcentration and the concentration of hydrothermal reworking

Uranium and environment in Kazakstan

International Nuclear Information System (INIS)

Fyodorov, G.; Bayadilov, E.; Zhelnov, V.; Akhmetov, M.; Abakumov, A.

1997-01-01

Kazakstan's data on uranium as a state report has been included for the first time in the Red Book. Therefore the report contains two large themes presented in Suggested Topics for Papers: Country report, based on the 1995 NEA/IAEA Red Book Questionnaire and environmental impact regulations. Kazakstan is considered as one of the world leaders on uranium supply. In Kazakstan there are many well known types of deposits but the main one is the sandstone-rollfront type. That type is represented by the group of deposits of the Syr-Darya uranium ore province. Deposits of that type include that main part of uranium ore of the Republic of Kazakstan and supply almost all of its uranium mining. At the large three enterprises the uranium is extracted by underground leaching. The mining method of uranium extraction is stopped. Because of the poor development of nuclear energy, Kazakstan's need for uranium is not very high. Presence of a large amount of cheap and technological uranium ores allow the Republic to export uranium. There are plans to increase uranium mining and perhaps to establish new mining facilities including joint-ventures. More than 50 uranium deposits are known in Kazakstan. During prospecting and exploitation of these deposits a large amount of rad wastes in the form of ore dumps and tailings were generated. They have a substantial influence on the environment. Moreover, near the sandstone-rollfront type uranium deposits the large amount of underground water has been contaminated by radionuclides. Special investigation of this phenomenon is necessary. In Kazakstan there are the rad waste disposal conception and contaminated earth recultivation regulations. At present ''The Rad Wastes Management Law'' is submitted for approval. (author). 2 figs

Microbial accumulation of uranium

International Nuclear Information System (INIS)

Zhang Wei; Dong Faqin; Dai Qunwei

2005-01-01

The mechanism of microbial accumulation of uranium and the effects of some factors (including pH, initial uranium concentration, pretreatment of bacteria, and so on) on microbial accumulation of uranium are discussed briefly. The research direction and application prospect are presented. (authors)

Trends in uranium supply

Energy Technology Data Exchange (ETDEWEB)

Hansen, M [International Atomic Energy Agency, Division of Nuclear Power and Reactors, Nuclear Materials and Fuel Cycle Section, Vienna (Austria)

1976-07-01

Prior to the development of nuclear power, uranium ores were used to a very limited extent as a ceramic colouring agent, as a source of radium and in some places as a source of vanadium. Perhaps before that, because of the bright orange and yellow colours of its secondary ores, it was probably used as ceremonial paint by primitive man. After the discovery of nuclear fission a whole new industry emerged, complete with its problems of demand, resources and supply. Spurred by special incentives in the early years of this new nuclear industry, prospectors discovered over 20 000 occurrences of uranium in North America alone, and by 1959 total world production reached a peak of 34 000 tonnes uranium from mines in South Africa, Canada and United States. This rapid growth also led to new problems. As purchases for military purposes ended, government procurement contracts were not renewed, and the large reserves developed as a result of government purchase incentives, in combination with lack of substantial commercial market, resulted in an over-supply of uranium. Typically, an over-supply of uranium together with national stockpiling at low prices resulted in depression of prices to less than $5 per pound by 1971. Although forecasts made in the early 1970's increased confidence in the future of nuclear power, and consequently the demand for uranium, prices remained low until the end of 1973 when OPEC announced a very large increase in oil prices and quite naturally, prices for coal also rose substantially. The economics of nuclear fuel immediately improved and prices for uranium began to climb in 1974. But the world-wide impact of the OPEC decision also produced negative effects on the uranium industry. Uranium production costs rose dramatically, as did capital costs, and money for investment in new uranium ventures became more scarce and more expensive. However, the uranium supply picture today offers hope of satisfactory development in spite of the many problems to be

Trends in uranium supply

International Nuclear Information System (INIS)

Hansen, M.

1976-01-01

Prior to the development of nuclear power, uranium ores were used to a very limited extent as a ceramic colouring agent, as a source of radium and in some places as a source of vanadium. Perhaps before that, because of the bright orange and yellow colours of its secondary ores, it was probably used as ceremonial paint by primitive man. After the discovery of nuclear fission a whole new industry emerged, complete with its problems of demand, resources and supply. Spurred by special incentives in the early years of this new nuclear industry, prospectors discovered over 20 000 occurrences of uranium in North America alone, and by 1959 total world production reached a peak of 34 000 tonnes uranium from mines in South Africa, Canada and United States. This rapid growth also led to new problems. As purchases for military purposes ended, government procurement contracts were not renewed, and the large reserves developed as a result of government purchase incentives, in combination with lack of substantial commercial market, resulted in an over-supply of uranium. Typically, an over-supply of uranium together with national stockpiling at low prices resulted in depression of prices to less than $5 per pound by 1971. Although forecasts made in the early 1970's increased confidence in the future of nuclear power, and consequently the demand for uranium, prices remained low until the end of 1973 when OPEC announced a very large increase in oil prices and quite naturally, prices for coal also rose substantially. The economics of nuclear fuel immediately improved and prices for uranium began to climb in 1974. But the world-wide impact of the OPEC decision also produced negative effects on the uranium industry. Uranium production costs rose dramatically, as did capital costs, and money for investment in new uranium ventures became more scarce and more expensive. However, the uranium supply picture today offers hope of satisfactory development in spite of the many problems to be

Preliminary discussion on uranium metallogenic models of China's in-situ leachable sandstone-type uranium deposits

International Nuclear Information System (INIS)

Zhang Jindai; Xu Gaozhong; Chen Anping; Wang Cheng

2005-01-01

By comprehensively analyzing metallogenic environments and main ore-controlling factors of important uranium metallogenic regions of in-situ leachable sandstone-type uranium deposits at the southern margin of Yili basin, at the south-western margin of Turpan-Hami basin and in the northeastern Ordos basin, the authors of this paper discuss the metallogenic models of China's in-situ leachable sandstone-type uranium deposits, and suggest that the interlayer oxidation zone type uranium deposits in Yili and Turpan-Hami basins are basically controlled by favourable structures, sedimentary formations and interlayer oxidation zone, and are characterized by multistage uranium concentration, namely the uranium pre-concentration of ore-hosting sedimentary formation, the uranium ore-formation in the stage of supergenic epigenetic reworking, and the further superimposition enrichment of post-ore tectonic activity. However, the interlayer oxidation zone type uranium deposit in the northeastern Ordos was formed after the formation of the secondary reduction. So, paleo-interlayer oxidation zone type uranium mineralization has the mineralization size much greater than the former two. (authors)

Radiation damage of uranium

International Nuclear Information System (INIS)

Lazarevic, Dj.

1966-11-01

Study of radiation damage covered the following: Kinetics of electric resistance of uranium and uranium alloy with 1% of molybdenum dependent on the second phase and burnup rate; Study of gas precipitation and diffusion of bubbles by transmission electron microscopy; Numerical analysis of the influence of defects distribution and concentration on the rare gas precipitation in uranium; study of thermal sedimentation of uranium alloy with molybdenum; diffusion of rare gas in metal by gas chromatography method

A review of uranium corrosion by hydrogen and the formation of uranium hydride

OpenAIRE

Banos, A.; Harker, N. J.; Scott, T. B.

2018-01-01

Uranium hydride (UH3) is the direct product of the reaction between uranium metal and gaseous hydrogen. In the context of uranium storage, this corrosion reaction is considered deleterious, not just because the structure of the metal may become significantly degraded but also because the resulting hydride is pyrophoric and therefore potentially flammable in air if present in significant quantity. The current review draws from the literature surrounding the uranium-hydrogen system accrued over...

Production of molybdenum-99 by heterogeneous and homogeneous uranium fueled reactors

International Nuclear Information System (INIS)

Carlin, G.E.; Bonin, H.W.

2012-01-01

The use of radioisotopes for various procedures in the health care industry has become one of the most important practices in medicine. At the forefront of the medical isotope list is molybdenum-99 and its daughter isotope technetium-99m, which encompass over 80% of radiopharmaceutical procedures. Fission of uranium-235 to produce molybdenum-99 is the most widely used method for producing this radioisotope. The heterogeneous reactor and the aqueous homogeneous reactor are looked at here with emphasis on the use of low enriched uranium as the fuel source. Methods of technetium-99m generation and its medical use are also reviewed. (author)

Production of molybdenum-99 by heterogeneous and homogeneous uranium fueled reactors

Energy Technology Data Exchange (ETDEWEB)

Carlin, G.E.; Bonin, H.W., E-mail: george.carlin@rmc.ca, E-mail: bonin-h@rmc.ca [Royal Military College of Canada, Kingston, Ontario (Canada)

2012-07-01

The use of radioisotopes for various procedures in the health care industry has become one of the most important practices in medicine. At the forefront of the medical isotope list is molybdenum-99 and its daughter isotope technetium-99m, which encompass over 80% of radiopharmaceutical procedures. Fission of uranium-235 to produce molybdenum-99 is the most widely used method for producing this radioisotope. The heterogeneous reactor and the aqueous homogeneous reactor are looked at here with emphasis on the use of low enriched uranium as the fuel source. Methods of technetium-99m generation and its medical use are also reviewed. (author)

Method to manufacture a nuclear fuel from uranium-plutonium monocarbide or uranium-plutonium mononitride

International Nuclear Information System (INIS)

Krauth, A.; Mueller, N.

1977-01-01

Pure uranium carbide or nitride is converted with plutonium oxide and carbon (all in powder form) to uranium-plutonium monocarbide or mononitride by cold pressing and sintering at about 1600 0 C. Pure uranium carbide or uranium nitride powder is firstly prepared without extensive safety measures. The pure uranium carbide or nitride powder can also be inactivated by using chemical substances (e.g. stearic acid) and be handled in air. The sinterable uranium carbide or nitride powder (or also granulate) is then introduced into the plutonium line and mixed with a nonstoichiometrically adjusted, prereacted mixture of plutonium oxide and carbon, pressed to pellets and reaction sintered. The surface of the uranium-plutonium carbide (higher metal content) can be nitrated towards the end of the sinter process in a stream of nitrogen. The protective layer stabilizes the carbide against the water and oxygen content in air. (IHOE) [de

Uranium purchasers reassert their influence

International Nuclear Information System (INIS)

Braatz, U.

1976-01-01

The growing uranium requirement in the Western world in the long run can be met only by a participation of the electricity generating industry and the governments of the participating countries in the development costs of new deposits, according to statements by leading representatives of the uranium producers and consumers at a symposium organized by the Uranium Institute in the summer of 1976. On the other hand, the uranium market is likely to get under more and more pressure because of the delays in nuclear power programs worldwide. It is probable that the price of uranium will soon have reached its peak for a long time to come. Uranium producers also will have to bear in mind that a price policy which makes the use of uranium unattractive compared with other sources of energy could well result in a situation in which the largest uranium consumers would build more conventional thermal power stations to bridge the time to commercial introduction of fast breeder reactors. (orig.) [de

Keeping health facilities safe: one way of strengthening the interaction between disease-specific programmes and health systems.

Science.gov (United States)

Harries, Anthony D; Zachariah, Rony; Tayler-Smith, Katie; Schouten, Erik J; Chimbwandira, Frank; Van Damme, Wim; El-Sadr, Wafaa M

2010-12-01

The debate on the interaction between disease-specific programmes and health system strengthening in the last few years has intensified as experts seek to tease out common ground and find solutions and synergies to bridge the divide. Unfortunately, the debate continues to be largely academic and devoid of specificity, resulting in the issues being irrelevant to health care workers on the ground. Taking the theme 'What would entice HIV- and tuberculosis (TB)-programme managers to sit around the table on a Monday morning with health system experts', this viewpoint focuses on infection control and health facility safety as an important and highly relevant practical topic for both disease-specific programmes and health system strengthening. Our attentions, and the examples and lessons we draw on, are largely aimed at sub-Saharan Africa where the great burden of TB and HIV ⁄ AIDS resides, although the principles we outline would apply to other parts of the world as well. Health care infections, caused for example by poor hand hygiene, inadequate testing of donated blood, unsafe disposal of needles and syringes, poorly sterilized medical and surgical equipment and lack of adequate airborne infection control procedures, are responsible for a considerable burden of illness amongst patients and health care personnel, especially in resource-poor countries. Effective infection control in a district hospital requires that all the components of a health system function well: governance and stewardship, financing,infrastructure, procurement and supply chain management, human resources, health information systems, service delivery and finally supervision. We argue in this article that proper attention to infection control and an emphasis on safe health facilities is a concrete first step towards strengthening the interaction between disease-specific programmes and health systems where it really matters – for patients who are sick and for the health care workforce who provide

The Cross-Section for the Radiative Capture of Thermal Neutrons by Uranium

Energy Technology Data Exchange (ETDEWEB)

Broda, E.

1942-07-01

This report is based on an experiment performed at the Cavendish Laboratory (Cambridge) by E. Broda, J. Guéron and L. Kowarski in July 1942 where the intensity of the beta-activity induced in uranium by thermal neutrons has been compared with that induced in manganese or iodine. Care was taken to avoid losses due to a Szilard-Chalmers effect. The capture cross section of uranium for thermal neutrons is found to amount to (2.78 ±0.1)*10{sup -24} cm{sup 2}, assuming the value 581*10{sup -24} cm{sup 2} for σ{sub B}. (nowak)

A comparison between thorium-uranium and low enrichment uranium cycles in the high temperature reactors

Energy Technology Data Exchange (ETDEWEB)

Cerles, J M

1973-03-15

In a previous report, it was shown that the Uranium cycle could be used as well with multi-hole block (GGA type) as with tubular elements. Now, in a F.S.V. geometry, a comparison is made between Thorium cycle and Uranium cycle. This comparison will be concerned with the physical properties of the materials, the needs of natural Uranium, the fissile material inventory and, at last, an attempt of economical considerations. In this report the cycle will be characterizd by the fertile material. So, we write ''Thorium cycle'' for Highly Enriched Uranium - Thorium cycle and ''Uranium cycle'' for low Enrichment Uranium cycle.

Physicochemical aspects of extraction of uranium concentrate from the wastes and thermodynamic characteristics of thorium-uranium compounds

International Nuclear Information System (INIS)

Khamidov, F.A.

2017-01-01

The purpose of present work is elaboration of physicochemical aspects of extraction of uranium concentrate from the wastes and study of thermodynamic characteristics of thorium-uranium compounds. Therefore, the radiological monitoring of tailing dumps of Tajikistan has been conducted; the obtaining of uranium concentrate from the tailing dumps of uranium production has been studied; the obtaining of uranium concentrate from the tailing dumps of uranium production with application of local sorbents has been studied as well; thermal stability and thermodynamic characteristics of uranium-thorium compounds has been investigated; the flowsheets of extraction of uranium concentrate from the wastes have been elaborated.

Radioactivity and the French uranium bearing minerals

International Nuclear Information System (INIS)

Guiollard, P.Ch.; Boisson, J.M.; Leydet, J.C.; Meisser, N.

1998-01-01

This special issue of Regne Mineral journal is entirely devoted to the French uranium mining industry. It comprises 4 parts dealing with: the uranium mining industry in France (history, uranium rush, deposits, geologic setting, prosperity and recession, situation in 1998, ore processing); radioactivity and the uranium and its descendants (discovery, first French uranium bearing ores, discovery of radioactivity, radium and other uranium descendants, radium mines, uranium mines, atoms, elements and isotopes, uranium genesis, uranium decay, isotopes in an uranium ore, spontaneous fission, selective migration of radionuclides, radon in mines and houses, radioactivity units, radioprotection standards, new standards and controversies, natural and artificial radioactivity, hazards linked with the handling and collecting of uranium ores, conformability with radioprotection standards, radioactivity of natural uranium minerals); the French uranium bearing minerals (composition, crystal structure, reference, etymology, fluorescence). (J.S.)

Uranium in Canada: Billion-dollar industry

International Nuclear Information System (INIS)

Whillans, R.T.

1989-01-01

In 1988, Canada maintained its position as the world's leading producer and exporter of uranium; five primary uranium producers reported concentrate output containing 12,400 MT of uranium, or about one-third of Western production. Uranium shipments made by these producers in 1988 exceeded 13,200 MT, worth Canadian $1.1 billion. Because domestic requirements represent only 15% of current Canadian output, most of Canada's uranium production is available for export. Despite continued market uncertainty in 1988, Canada's uranium producers signed new sales contracts for some 14,000 MT, twice the 1987 level. About 90% of this new volume is with the US, now Canada's major uranium customer. The recent implementation of the Canada/US Free Trade agreement brings benefits to both countries; the uranium industries in each can now develop in an orderly, free market. Canada's uranium industry was restructured and consolidated in 1988 through merger and acquisition; three new uranium projects advanced significantly. Canada's new policy on nonresident ownership in the uranium mining sector, designed to encourage both Canadian and foreign investment, should greatly improve efforts to finance the development of recent Canadian uranium discoveries

[Strengthening of the steering role of health++ authorities in health care reforms].

Science.gov (United States)

Marín, J M

2000-01-01

Strengthening the ability of health authorities to provide leadership and guidance, now and in the future, is an important issue within the context of health sector reform. It means, among other things, redefining the role of health in light of leading social and economic trends seen in the world at the beginning of the 21st century, increasing participation in health by nongovernmental entities, moving toward participatory democracy in many countries, and modifying concepts of what is considered "public" and "private." Within this scenario, it is necessary to redirect the role of the health sector toward coordinating the mobilization of national resources, on a multisectoral scale, in order to improve equity and social well-being and to channel the limited available resources to the most disadvantaged groups in society. The liberalization of the production and distribution of health-related goods and services, including insurance, challenges the exercise of authority in the area of health. Furthermore, the formation of regional economic blocks and the enormous weight wielded by multinational companies in the areas of pharmaceuticals and other medical supplies and technologies are forcing the health sector to seek ways of harmonizing health legislation and international negotiations. According to many experts, all of these demands surpass the ability of Latin American ministries of health to effectively respond, given most countries' current organizational, legal, and political conditions and technical infrastructure. The countries of the Americas must make it a priority to strengthen their health officials' ability to provide leadership and guidance in order to meet present and future challenges.

Uranium geochemistry of Orca Basin

International Nuclear Information System (INIS)

Weber, F.F. Jr.; Sackett, W.M.

1981-01-01

Orca Basin, an anoxic, brine-filled depression at a depth of 2200 m in the Northwestern Gulf of Mexico continental slope, has been studied with respect to its uranium geochemistry. Uranium concentration profiles for four cores from within the basin were determined by delayed-neutron counting. Uranium concentrations ranged from 2.1 to 4.1 ppm on a salt-free and carbonate-corrected basis. The highest uranium concentrations were associated with the lowest percentage and delta 13 C organic carbon values. For comparison, cores from the brine-filled Suakin and Atlantis II Deeps, both in the Red Sea, were also analyzed. Uranium concentrations ranged from 1.2 to 2.6 ppm in the Suakin Deep and from 8.0 to 11.0 ppm in the Atlantis II Deep. No significant correlation was found between uranium concentrations and organic carbon concentrations and delta 13 C values for these cores. Although anoxic conditions are necessary for significant uranium uptake by non-carbonate marine sediments, other factors such as dilution by rapidly depositing materials and uranium supply via mixing and diffusion across density gradients may be as important in determining uranium concentrations in hypersaline basin sediments. (author)

Developments in uranium in 1986

International Nuclear Information System (INIS)

Chenoweth, W.L.

1987-01-01

Imported uranium and low prices continued to plague the domestic uranium industry and, as a result, the Secretary of Energy declared the domestic industry to be nonviable for the second straight year. Uranium exploration expenditures in the US declined for the eighth consecutive year. In 1986, an estimated $19 million was spent on uranium exploration, including 1.9 million ft of surface drilling. This drilling was done mainly in producing areas and in areas of recent discoveries. Production of uranium concentrate increased in 1986, when 13.8 million lb of uranium oxide (U 3 O 8 ) were produced, a 22% increase over 1985. Uranium produced as the result of solution mining and as the by-product of phosphoric acid production accounted for about 37% of the total production in the US. At the end of 1986, only 6 uranium mills were operating in the US. Canada continued to dominate the world market. The development under way at the huge Olympic Dam deposit in Australia will increase that country's production. US uranium production is expected to show a small decrease in 1987. 3 figures, 2 tables

US uranium market developments

International Nuclear Information System (INIS)

Krusiewski, S.V.; Patterson, J.A.

1980-01-01

Domestic uranium delivery commitments have risen significantly since January 1979, with the bulk of deliveries scheduled after 1990. Much of the long-term procurement will be obtained from captive production. However, buyers have adjusted their delivery schedules in the near term, deferring some procurement to later years, including a portion of planned captive production. Under current commitments, US imports of foreign uranium in the 1981 to 1985 period will be greater than our exports of domestic uranium. The anticipated supply of domestic uranium through 1985 is clearly more than adequate to fill the probable US demand in the meantime, uranium producers are continuing their efforts to increase future domestic supply by their considerable investments in new or expanded mine and mill facilities. Since January 1980, average contract prices including market-price settlements, for 1980 uranium deliveries have increased slightly, but average market-price settlements made this year have decreased by several dollars. While the general trend of US uranium prices has been upward since we began reporting price data in 1973, some reductions in average prices for future deliveries appeared in 1980. The softening of prices for new procurement can be expected to be increasingly apparent in future surveys

Uranium toxicology

International Nuclear Information System (INIS)

Ferreyra, Mariana D.; Suarez Mendez, Sebastian

1997-01-01

In this paper are presented the methods and procedures optimized by the Nuclear Regulatory Authority (ARN) for the determination of: natural uranium mass, activity of enriched uranium in samples of: urine, mucus, filters, filter heads, rinsing waters and Pu in urine, adopted and in some cases adapted, by the Environmental Monitoring and Internal Dosimetry Laboratory. The analyzed material corresponded to biological and environmental samples belonging to the staff professionally exposed that work in plants of the nuclear fuel cycle. For a better comprehension of the activities of this laboratory, it is included a brief description of the uranium radiochemical toxicity and the limits internationally fixed to preserve the workers health

Chapter 1. General information about uranium. 1.10. Uranium application

International Nuclear Information System (INIS)

Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.

2011-01-01

Full text: Metallic uranium or its compounds are used as nuclear fuel in nuclear reactors. A natural or low-enriched admixture of uranium isotopes is applied in stationery reactors of nuclear power plants, and products of a high enrichment degree are used in nuclear power plants or in reactors that operates with fast neutrons. 235 U is a source of nuclear energy in nuclear weapons. Depleted uranium is used as armour-piercing core in bombshells. 238 U serves as a source of secondary nuclear fuel - plutonium. (author)

Chapter 1. General information about uranium. 1.10. Uranium application

International Nuclear Information System (INIS)

Khakimov, N.; Nazarov, Kh.M.; Mirsaidov, I.U.

2012-01-01

Full text: Metallic uranium or its compounds are used as nuclear fuel in nuclear reactors. A natural or low-enriched admixture of uranium isotopes is applied in stationery reactors of nuclear power plants, and products of a high enrichment degree are used in nuclear power plants or in reactors that operates with fast neutrons. 235 U is a source of nuclear energy in nuclear weapons. Depleted uranium is used as armour-piercing core in bombshells. 238 U serves as a source of secondary nuclear fuel - plutonium.

Method for the recovery of uranium values from uranium tetrafluoride

International Nuclear Information System (INIS)

Kreuzmann, A.B.

1984-01-01

The invention comprises reacting particulate uranium tetrafluoride and alkaline earth metal oxide (e.g. CaO, MgO) in the presence of gaseous oxygen to effect formation of the corresponding alkaline earth metal uranate and alkaline earth metal fluoride. The product uranate is highly soluble in various acidic solutions whereas the product fluoride is virtually insoluble therein. The product mixture of uranate and alkaline earth metal fluoride is contacted with a suitable acid to provide a uranium-containing solution, from which the uranium is recovered. (author)

Pursuit of improvement in uranium bulk analysis at the clear facility for safeguards environmental samples

International Nuclear Information System (INIS)

Sakurai, S.; Takahashi, M.; Sakakibara, T.; Magara, M.; Kurosawa, S.; Esaka, F.; Takai, K.; Watanabe, K.; Usuda, S.; Adachi, T.

2002-01-01

Full text: In order to contribute to the IAEA strengthened safeguards system, a project started in Japan Atomic Energy Research Institute (JAERI) in 1998. Consequently, a clean room facility called as CLEAR, the Clean Laboratory for Environmental Analysis and Research, was constructed in June 2001 at JAERI Tokai and the analytical techniques of ultra-trace nuclear materials in environmental samples are being developed. As for the bulk analysis, performance of inductively-coupled plasma mass spectrometry (ICP-MS) was mainly examined because sample preparation for ICP-MS is simpler than that for thermal ionization mass spectrometry (TIMS). Interference of polyatomic ion (such as PtAr + ) and coexisting element (such as Na) on the uranium ions, as well as mass bias caused by ICP-MS operating conditions, has been investigated for precise measurement on uranium isotope ratio. The authors have also studied on the uranium blanks during sample treatment process. The blank value below 10 pg uranium per sample treatment was obtained: dominant origins were elution from Teflon vessel surface in acid heating process of the sample to dry up. The work is in progress to minimize the blank. Compared with the process blank and the minimum uranium amount for isotope ratio measurement by ICP-MS (ca. 10 pg for natural uranium), the swipe cotton (Texwipe-304) which is currently used for IAEA Environmental Sampling includes much more amount of natural uranium in several nano-grams. If the amount of uranium collected on Texwipe-304 is small, sensitive and reliable measurement on isotope ratio will be impossible by bulk analysis. The authors are seeking alternative swipe materials with less amount of uranium. Recently, one of the authors devised an effective technique for recovery of uranium-containing particles from Texwipe-304. The technique, named as Vacuum Suction Method, uses a combination of polycarbonate membrane filters and a macro-pipette tip, which is connected to a vacuum pump

Current status and prospects of uranium geology developments of foreign in-situ leachable sandstone type uranium deposits

International Nuclear Information System (INIS)

Wang Zhengbang

2002-01-01

Firstly, with emphasis on in-situ leachable sandstone-type uranium deposits, the prospecting history of uranium deposits worldwide and its scientific research development are generally reviewed in four steps, and their basic historical experience is also summarized. Secondly, based on the detailed description of current development status of uranium geology of foreign in-situ leachable sandstone-type uranium deposits the important strategic position of sandstone-type uranium deposits in overall uranium resources all-over-the-world and its classification, spatial-temporal distribution and regulation, and metallogenic condition of sandstone-type uranium deposits are analysed thoroughly in five aspects: techtonics, paleo-climate, hydrogeology, sedimentary facies and lithology, as well as uranium sources: Afterwards, evaluation principles of three type of hyper-genic, epigenetic infiltrated sandstone-type uranium deposits are summarized. Based on sandstone-type uranium deposits located two important countries: the United States and Russia, the current development status of prospecting technology for in-situ leachable sandstone-type uranium deposits in foreign countries is outlined. Finally, according to the prospects of supply-demand development of global uranium resources, the author points out seriously that Chinese uranium geology is faced with a severe challenge, and proposes directly four strategic measures that should be taken

Uranium control in phosphogypsum

International Nuclear Information System (INIS)

Hurst, F.J.; Arnold, W.D.

1980-01-01

In wet-process phosphoric acid plants, both previous and recent test results show that uranium dissolution from phosphate rock is significantly higher when the rock is acidulated under oxidizing conditions than under reducing conditions. Excess sulfate and excess fluoride further enhance the distribution of uranium to the cake. Apparently the U(IV) present in the crystal lattice of the apatite plus that formed by reduction of U(IV) by FE(II) during acidulation is trapped or carried into the crystal lattice of the calcium sulfate crystals as they form and grow. The amount of uranium that distributes to hemihydrate filter cake is up to seven times higher than the amount that distributes to the dihydrate cake. About 60% of the uranium in hemihydrate cakes can be readily leached after hydration of the cake, but the residual uranium (20 to 30%) is very difficult to remove economically. Much additional research is needed to develop methods for minimizing uranium losses to calcium filter cakes

Uranium resources and supply

International Nuclear Information System (INIS)

Cameron, J.

1973-01-01

The future supply of uranium has to be considered against a background of forecasts of uranium demand over the next decades which show increases of a spectacular nature. It is not necessary to detail these forecasts, they are well known. A world survey by the Joint NEA/IAEA Working Party on 'Uranium Resources, Production and Demand', completed this summer, indicates that from a present production level of just over 19,000 tonnes uranium per year, the demand will rise to the equivalent of an annual production requirement of 50,000 tonnes uranium by 1980, 100,000 by 1985 and 180,000 by 1990. Few, if any, mineral production industries have been called upon to plan for a near tenfold increase in production in a space of about 15 years as these forecasts imply. This might possibly mean that, perhaps, ten times the present number of uranium mines will have to be planned and engineered by 1990

Titrimetric determination of uranium

International Nuclear Information System (INIS)

Florence, T.M.

1989-01-01

Titrimetric methods are almost invariably used for the high precision assay of uranium compounds, because gravimetric methods are nonselective, and not as reliable. Although precipitation titrations have been used, for example with cupferron and ferrocyanide, and chelate titrations with EDTA and oxine give reasonable results, in practice only redox titrations find routine use. With all redox titration methods for uranium a precision of 01 to 02 percent can be achieved, and precisions as high as 0.003 percent have been claimed for the more refined techniques. There are two types of redox titrations for uranium in common use. The first involves the direct titration of uranium (VI) to uranium (IV) with a standard solution of a strong reductant, such as chromous chloride or titanous chloride, and the second requires a preliminary reduction of uranium to the (IV) or (III) state, followed by titration back to the (VI) state with a standard oxidant. Both types of redox titrations are discussed. 4 figs

Classification of Uranium deposits

International Nuclear Information System (INIS)

Dahlkamp, F.J.

1978-01-01

A listing of the recognized types of uranium mineralization shows nineteen determinable types out of which only six can be classified as of economic significance at present: Oligomiitic quartz pebble conglomerates, sandstone types, calcretes, intra-intrusive types, hydrothermal veins, veinlike types. The different types can be genetically related to prevalent geological environments, i.e. 1. the primary uranium occurrences formed by endogenic processes, 2. the secondary derived from the primary by subsequent exogenic processes, 3. the tertiary occurrences are assumed to be formed by endogenic metamorphic processes, although little is known about the behaviour of the uranium during the metamorphosis and therefore the metallogenesis of this tertiary uranium generation is still vague. A metallotectonic-geochronologic correlation of the uranium deposits shows a distinct affinity of the uranium to certain geological epochs: The Upper Archean, Lower Proterozoic, the Hercynian and, in a less established stage, the Upper Proterozoic. (orig.) 891 HP/orig. 892 MKO [de

Uranium Newsletter. No. 1

International Nuclear Information System (INIS)

1987-03-01

The new Uranium Newsletter is presented as an IAEA annual newsletter. The organization of the IAEA and its involvement with uranium since its founding in 1957 is described. The ''Red Book'' (Uranium Resources, Production and Demand) is mentioned. The Technical Assistance Programme of the IAEA in this field is also briefly mentioned. The contents also include information on the following meetings: The Technical Committee Meeting on Uranium Deposits in Magmatic and Metamorphic Rocks, Advisory Group Meeting on the Use of Airborne Radiometric Data, and the Technical Committee Meeting on Metallogenesis. Recent publications are listed. Current research contracts in uranium exploration are mentioned. IAEA publications on uranium (in press) are listed also. Country reports from the following countries are included: Australia, Brazil, Canada, China (People's Republic of), Denmark, Finland, Germany (Federal Republic of), Malaysia, Philippines, Portugal, South Africa (Republic of), Spain, Syrian Arab Republic, United Kingdom, United States of America, Zambia, and Greece. There is also a report from the Commission of European Communities

Areva in Niger

International Nuclear Information System (INIS)

2005-02-01

Niger is the second poorest country in the world but it has natural resources underground in the form of uranium ores deposits. This uranium is currently mined by two companies incorporated under Nigerian law: Somair and Cominak, operated by the principal shareholder Areva (through its subsidiary Cogema). After a presentation of Somair and Cominak key figures, this document details the working conditions and radiological protection, the environmentally friendly operations, the production traceability, the local economic development, the strengthening of the health care system and the development of the infrastructure. (A.L.B.)

Uranium enrichment

International Nuclear Information System (INIS)

Rae, H.K.; Melvin, J.G.

1988-06-01

Canada is the world's largest producer and exporter of uranium, most of which is enriched elsewhere for use as fuel in LWRs. The feasibility of a Canadian uranium-enrichment enterprise is therefore a perennial question. Recent developments in uranium-enrichment technology, and their likely impacts on separative work supply and demand, suggest an opportunity window for Canadian entry into this international market. The Canadian opportunity results from three particular impacts of the new technologies: 1) the bulk of the world's uranium-enrichment capacity is in gaseous diffusion plants which, because of their large requirements for electricity (more than 2000 kW·h per SWU), are vulnerable to competition from the new processes; 2) the decline in enrichment costs increases the economic incentive for the use of slightly-enriched uranium (SEU) fuel in CANDU reactors, thus creating a potential Canadian market; and 3) the new processes allow economic operation on a much smaller scale, which drastically reduces the investment required for market entry and is comparable with the potential Canadian SEU requirement. The opportunity is not open-ended. By the end of the century the enrichment supply industry will have adapted to the new processes and long-term customer/supplier relationships will have been established. In order to seize the opportunity, Canada must become a credible supplier during this century

Assessing the Renal Toxicity of Capstone Depleted Uranium Oxides and Other Uranium Compounds

International Nuclear Information System (INIS)

Roszell, Laurie E.; Hahn, Fletcher; Lee, Robyn B.; Parkhurst, MaryAnn

2009-01-01

The primary target for uranium toxicity is the kidney. The most frequently used guideline for uranium kidney burdens is the International Commission on Radiation Protection (ICRP) value of 3 (micro)g U/g kidney, a value that is based largely upon chronic studies in animals. In the present effort, we have developed a risk model equation to assess potential outcomes of acute uranium exposure. Twenty-seven previously published case studies in which workers were acutely exposed to soluble compounds of uranium (as a result of workplace accidents) were analyzed. Kidney burdens of uranium for these individuals were determined based on uranium in the urine, and correlated with health effects observed over a period of up to 38 years. Based upon the severity of health effects, each individual was assigned a score (- to +++) and then placed into an Effect Group. A discriminant analysis was used to build a model equation to predict the Effect Group based on the amount of uranium in the kidneys. The model equation was able to predict the Effect Group with 85% accuracy. The risk model was used to predict the Effect Group for Soldiers exposed to DU as a result of friendly fire incidents during the 1991 Gulf War. This model equation can also be used to predict the Effect Group of new cases in which acute exposures to uranium have occurred

Method of preparation of uranium nitride

Science.gov (United States)

Kiplinger, Jaqueline Loetsch; Thomson, Robert Kenneth James

2013-07-09

Method for producing terminal uranium nitride complexes comprising providing a suitable starting material comprising uranium; oxidizing the starting material with a suitable oxidant to produce one or more uranium(IV)-azide complexes; and, sufficiently irradiating the uranium(IV)-azide complexes to produce the terminal uranium nitride complexes.

Potentiometric determination of hexavalent uranium in uranium silicide samples

International Nuclear Information System (INIS)

Arlegui, Oscar

1999-01-01

The Chilean Nuclear Energy Commission's Department of Nuclear Materials has among its projects the production of fuels elements for nuclear reactors, and, therefore, the Chemical Analysis Laboratory must have a rapid and reliable method for uranium analysis, to control the uranium concentration during each stage of the production process. For this reason the Chilean Nuclear Energy Commission's Chemical Analysis Laboratory has validated a potentiometric method, which is a modification of the Davies and Gray method proposed by A.R. Eberle. This method uses the Potentiometric Titration Technique and is based on the direct and rapid reduction of uranium (VI) to Uranium (IV), in a concentrated phosphoric acid medium, with excess iron (II) used as a reducing agent. In this medium the excess iron (II) selectively oxidizes to iron (III) with nitric acid, using molybdenum (IV) as a catalyzer, the nitrous acid that is produced is eliminated by adding amidosulfuric acid. The solution is diluted with 1M sulfuric acid and the uranium (IV) obtained is titrated potentiometrically with potassium dichromate in the presence of vanadilic sulfate to obtain a better defined final titration point. The samples were softened with hydrochloric acid and nitric acid and later 50 ml were estimated in a 20% sulfuric acid medium. The analytical method was validated by comparing it with Certified Reference Material (C.R.M.) from the New Brunswick Laboratory (NBL), Metallic Uranium, CRM 112-A. The F Test and the T Test show that the value calculated is less than the tabulated value so the result is traceable to the reference material. The quantification limit, sensitivity, precision and accuracy were quantified for the method

Uranium hexafluoride purification

International Nuclear Information System (INIS)

Araujo, Eneas F. de

1986-01-01

Uranium hexafluoride might contain a large amount of impurities after manufacturing or handling. Three usual methods of purification of uranium hexafluoride were presented: selective sorption, sublimation, and distillation. Since uranium hexafluoride usually is contaminated with hydrogen fluoride, a theoretical study of the phase equilibrium properties was performed for the binary system UF 6 -HF. A large deviation from the ideal solution behaviour was observed. A purification unity based on a constant reflux batch distillation process was developed. A procedure was established in order to design the re boiler, condenser and packed columns for the UF 6 -HF mixture separation. A bench scale facility for fractional distillation of uranium hexafluoride was described. Basic operations for that facility and results extracted from several batches were discussed. (author)

Hydrogeochemical and stream sediment sampling for uranium in the sandstone environment

International Nuclear Information System (INIS)

Wenrich, K.J.

1985-01-01

Sandstone terranes commonly host uranium occurrences in the western United States. In addition, because sedimentary terranes, particularly shales and immature, not well cemented sandstone, contribute more sediment and soluble material than do plutonic, volcanic, or metamorphic terranes they are an excellent regime for hydrogeochemical and stream-sediment prospecting. Because of higher conductivity, and hence higher uranium content, of waters draining such environments the sampling need not be as precise nor the analytical detection limit as low as in other terranes to yield a successful survey. Nevertheless, reasonable preparation and care of the samples is recommended: (1) The water samples should be filtered through 0.45 μm membranes and acidified to a pH of less than 1. (2) Because the adsorption of uranium by organic material is so significant it is recommended that the reasonable finest stream-sediment fraction, 4 , conductivity, etc.) are useful in the data reduction towards the elimination of false anomalies. (author)

Uranium mining

International Nuclear Information System (INIS)

Lange, G.

1975-01-01

The winning of uranium ore is the first stage of the fuel cycle. The whole complex of questions to be considered when evaluating the profitability of an ore mine is shortly outlined, and the possible mining techniques are described. Some data on uranium mining in the western world are also given. (RB) [de

31 CFR 540.309 - Natural uranium.

Science.gov (United States)

2010-07-01

... 31 Money and Finance: Treasury 3 2010-07-01 2010-07-01 false Natural uranium. 540.309 Section 540... FOREIGN ASSETS CONTROL, DEPARTMENT OF THE TREASURY HIGHLY ENRICHED URANIUM (HEU) AGREEMENT ASSETS CONTROL REGULATIONS General Definitions § 540.309 Natural uranium. The term natural uranium means uranium found in...

Uranium mine ventilation

International Nuclear Information System (INIS)

Katam, K.; Sudarsono

1982-01-01

Uranium mine ventilation system aimed basically to control and decreasing the air radioactivity in mine caused by the radon emanating from uranium ore. The control and decreasing the air ''age'' in mine, with adding the air consumption volume, increasing the air rate consumption, closing the mine-out area; using closed drainage system. Air consumption should be 60m 3 /minute for each 9m 2 uranium ore surfaces with ventilation rate of 15m/minute. (author)

Uranium Processing Facility

Data.gov (United States)

Federal Laboratory Consortium — An integral part of Y‑12's transformation efforts and a key component of the National Nuclear Security Administration's Uranium Center of Excellence, the Uranium...

Uranium in Niger

International Nuclear Information System (INIS)

Gabelmann, E.

1978-03-01

This document presents government policy in the enhancement of uranium resources, existing mining companies and their productions, exploitation projects and economical outcome related to the uranium mining and auxiliary activities [fr

Removal of uranium from uranium-contaminated soils -- Phase 1: Bench-scale testing

International Nuclear Information System (INIS)

Francis, C.W.

1993-09-01

To address the management of uranium-contaminated soils at Fernald and other DOE sites, the DOE Office of Technology Development formed the Uranium in Soils Integrated Demonstration (USID) program. The USID has five major tasks. These include the development and demonstration of technologies that are able to (1) characterize the uranium in soil, (2) decontaminate or remove uranium from the soil, (3) treat the soil and dispose of any waste, (4) establish performance assessments, and (5) meet necessary state and federal regulations. This report deals with soil decontamination or removal of uranium from contaminated soils. The report was compiled by the USID task group that addresses soil decontamination; includes data from projects under the management of four DOE facilities [Argonne National Laboratory (ANL), Los Alamos National Laboratory (LANL), Oak Ridge National Laboratory (ORNL), and the Savannah River Plant (SRP)]; and consists of four separate reports written by staff at these facilities. The fundamental goal of the soil decontamination task group has been the selective extraction/leaching or removal of uranium from soil faster, cheaper, and safer than current conventional technologies. The objective is to selectively remove uranium from soil without seriously degrading the soil's physicochemical characteristics or generating waste forms that are difficult to manage and/or dispose of. Emphasis in research was placed more strongly on chemical extraction techniques than physical extraction techniques

Unconventional uranium resources in China

International Nuclear Information System (INIS)

Qi Fucheng; Zhang Zilong; Li Zhixing; Wang Zhiming; He Zhongbo; Wang Wenquan

2011-01-01

Unconventional uranium resources in China mainly include black-rock series, peat, salt lake and evaporitic rocks. Among them, uraniferous black-rock series, uraniferous phosphorite and uranium-polymetallic phosphorite connected with black-rock series are important types for the sustainable support of uranium resources in China. Down-faulting and epocontinental rift in continental margin are the most important and beneficial ore-forming environment for unconventional uranium resources of black-rock series in China and produced a series of geochemistry combinations, such as, U-Cd, U-V-Mo, U-V-Re, U-V-Ni-Mo and U-V-Ni-Mo-Re-Tl. Unconventional uranium resources of black-rock series in China is related to uranium-rich marine black-rock series which are made up of hydrothermal sedimentary siliceous rocks, siliceous phospheorite and carbonaceous-siliceous-pelitic rock and settled in the continental margin down-faulting and epicontinental rift accompanied by submarine backwash and marine volcano eruption. Hydrothermal sedimentation or exhalation sedimentary is the mechanism to form unconventional uranium resources in black-rock series or large scale uranium-polymetallic mineralization in China. (authors)

Developments in uranium in 1982

International Nuclear Information System (INIS)

Chenoweth, W.L.

1983-01-01

Slippage in demand, increasing costs, and low spot market prices continued to influence the uranium industry during 1982. The supply of uranium exceeds the current demand and, as a result, exploration for uranium declined in the United States for the fourth straight year. During 1982, 92 companies spent $73.86 million on uranium exploration, including 6.1 million ft of surface drilling. This drilling was done mainly in the producing areas and in the areas of recent discoveries. During the year, a significant discovery was announced in south-central Virginia, the first major discovery in the eastern United States. Production of uranium concentrate declined in 1982, when 1,343 short tons of uranium oxide were produced. Numerous mines and 4 mills were closed during the year. Domestic uranium reserves, as calculated by the Department of Energy, decreased during 1982, mainly because of increasing production costs and the lack of exploration to find new reserves. Exploration for uranium in foreign countries also declined during 1982. Canada and Australia continue to dominate the long-term supply

Uranium retrieval support, storage, and marketing

International Nuclear Information System (INIS)

Jackson, J.D.; Marshall, E.M.

2001-01-01

The United States Department of Energy is implementing a stewardship approach to management of uranium assets. This life-cycle approach to managing uranium addresses current needs in the context of a long-term strategy. In June 1998, the United States Department of Energy established the Uranium Management Group. The mission of the UMG is to safely collect and store commercially viable uranium from various DOE facilities at a central location. The Oak Ridge Operations Office, in Oak Ridge, Tennessee, was given the task to establish a facility for the storage of these uranium materials. Materials collected are non-waste uranium and packaged to allow transport and long-term storage. Coordination of uranium management under the Uranium Management Group offers significant opportunities for sayings through improved planning and efficiency and creates an environmentally sound approach for the storage and reuse of excess uranium. (author)

Uranium retrieval support, storage, and marketing

Energy Technology Data Exchange (ETDEWEB)

Jackson, J.D.; Marshall, E.M. [U.S. Department of Energy, Oak Ridge, Tennessee (United States)

2001-07-01

The United States Department of Energy is implementing a stewardship approach to management of uranium assets. This life-cycle approach to managing uranium addresses current needs in the context of a long-term strategy. In June 1998, the United States Department of Energy established the Uranium Management Group. The mission of the UMG is to safely collect and store commercially viable uranium from various DOE facilities at a central location. The Oak Ridge Operations Office, in Oak Ridge, Tennessee, was given the task to establish a facility for the storage of these uranium materials. Materials collected are non-waste uranium and packaged to allow transport and long-term storage. Coordination of uranium management under the Uranium Management Group offers significant opportunities for sayings through improved planning and efficiency and creates an environmentally sound approach for the storage and reuse of excess uranium. (author)

An unusual feature of uranium ore from Domiasiat, Meghalaya: presence of water soluble uranium

International Nuclear Information System (INIS)

Singh, A.K.; Padmanabhan, N.P.H.; Sivaramakrishnan, K.; Krishna Rao, N.

1993-01-01

An unusual feature of the recently discovered sandstone-type uranium deposit in Domiasiat is the presence of appreciable amount of water soluble uranium. With normal tap water at its natural pH (7.5-7.8), upto 35% of the uranium in the ore was found to be soluble during agitation in the different samples. Presence of other ions in appreciable quantities particularly SO 4 -2 Cl - and Fe +3 appear to influence the dissolution. Percolation experiments give terminal solubilization of upto 58%, but the instantaneous uranium concentration in the percolating water attains its maximum within the first few minutes of contact. A detailed study on the chemistry of uranium dissolution may throw light on the physico-chemical controls of localization of uranium in the deposit. (author). 7 refs., 3 tabs., 4 tabs

Drawing of uranium in {gamma} phase; Filage de l'uranium en phase gamma

Energy Technology Data Exchange (ETDEWEB)

Stohr, J.A. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires; Chevigny, R. [Conpagnie, Pechiney, 73 - Chambery (France)

1955-07-01

It describes the study of working and drawing of uranium in {gamma} phase. In a first part, the forgeable characteristics of uranium metal in the three different phases ({alpha}, {beta} and {gamma}) are compared by using BASTIEN-PORTEVIN method. The different experiments are testing the behaviour metal in each phase under different stresses and a temperature gradient as slow and shock traction, slow and shock compression, resilience, flexibility. Results show that optimum conditions for uranium drawing is uranium in phase {gamma}. In a second part, it described the drawing method and process. The uranium rods obtained by this technique are of very good quality. In addition, the material wear is very low which permits a low production cost. Finally, the uranium rod physical properties are studied. (M.P.)

Vacuum fusion of uranium; Fusion de l'uranium sous vide

Energy Technology Data Exchange (ETDEWEB)

Stohr, J. A.

1957-06-04

After having outlined that vacuum fusion and moulding of uranium and of its alloys have some technical and economic benefits (vacuum operations avoid uranium oxidation and result in some purification; precision moulding avoids machining, chip production and chemical reprocessing of these chips; direct production of the desired shape is possible by precision moulding), this report presents the uranium fusion unit (its low pressure enclosure and pumping device, the crucible-mould assembly, and the MF supply device). The author describes the different steps of cast production, and briefly comments the obtained results.

Effect of pH and uranium concentration on interaction of uranium(VI) and uranium(IV) with organic ligands in aqueous solutions

International Nuclear Information System (INIS)

Li, W.C.; Victor, D.M.; Chakrabarti, C.L.

1980-01-01

The effect of pH and uranium concentration on the interactions of uranium(VI) and uranium(IV) with organic ligands was studied by employing dialysis and ultrafiltration techniques. The interactions of U(VI) and U(IV) with organic ligands in nitrate or chloride aqueous solution have been found to be pH-dependent. The stability constants of uranium-organic complexes decrease in the order: fulvic acid>humic acid>tannic acid for U(VI) and humic acid>tannic acid>fulvic acid for U(IV). Scatchard plots for the uranium-organic acid systems indicate two types of binding sites with a difference in stability constants of about 10 2 . Ultrafiltration of uranium-humic acid complexes indicates that U(VI) and U(IV) ions are concentrated in larger molecular size fractions (>5.1 nm) at pH less than or equal to 3 and in smaller molecular size fractions (in the range 5.1 to 3.1 nm and 2.4 to 1.9 nm) at pH greater than or equal to 5. 7 figures, 4 tables

Health-system strengthening and tuberculosis control.

Science.gov (United States)

Atun, Rifat; Weil, Diana E C; Eang, Mao Tan; Mwakyusa, David

2010-06-19

Weak health systems are hindering global efforts for tuberculosis care and control, but little evidence is available on effective interventions to address system bottlenecks. This report examines published evidence, programme reviews, and case studies to identify innovations in system design and tuberculosis control to resolve these bottlenecks. We outline system bottlenecks in relation to governance, financing, supply chain management, human resources, health-information systems, and service delivery; and adverse effects from rapid introduction of suboptimum system designs. This report also documents innovative solutions for disease control and system design. Solutions pursued in individual countries are specific to the nature of the tuberculosis epidemic, the underlying national health system, and the contributors engaged: no one size fits all. Findings from countries, including Bangladesh, Cambodia, India, Tanzania, Thailand, and Vietnam, suggest that advances in disease control and system strengthening are complementary. Tuberculosis care and control are essential elements of health systems, and simultaneous efforts to innovate systems and disease response are mutually reinforcing. Highly varied and context-specific responses to tuberculosis show that solutions need to be documented and compared to develop evidence-based policies and practice. Copyright 2010 Elsevier Ltd. All rights reserved.

The U.S. uranium industry

International Nuclear Information System (INIS)

Glasier, G.E.

1987-01-01

This presentation concentrates on the future of the U.S. uranium industry in light of potential embargo legislation and the uranium producers' lawsuit. The author discusses several possible resolutions which would lead to a more certain and possibly stable uranium market. The probability of one or more Six possible actions which would effect the uranium industry are addressed

Exploration on relationship between uranium and organic materials in carbonate-siliceous pelite type uranium ore deposits

International Nuclear Information System (INIS)

Dong Yongjie

1996-01-01

The author determines the content of uranium and organic carbon of part specimen of surrounding rocks and ores, which sampled from carbonate and black shale type uranium deposits in Xiushui, Jiangxi Province, and Tongcheng, Hubei Province. According to the analytical operation regulations of organic materials, extraction and separation of chloroform pitch is carried out. Internal relationships between uranium and organic derivative is discussed. The conclusion shows that: (1) certain co-relationship between U and organic carbon and chloroform extract is detected; (2) evolutionary processes of organic materials in the exogenetic uranium deposits are not all the same; (3) non-hydrocarbon is closely related to uranium, so it can be regarded as indicator of uranium gathering in exogenetic uranium deposits

Uranium in soil, forest litter and living plant material above three uranium mineralizations in Northern Sweden

International Nuclear Information System (INIS)

Ek, John

1982-01-01

In order to investigate the feasibility of biogeochemical sampling media in uranium exploration, samples from the most common trees and low bushes together with forest litter were collected over the areas of three uranium mineralizations in Northern Sweden and analyzed for uranium. The results were compared with uranium content of the till and its radioactivity. The average uranium content was low for all sample types and considerably lower in the ash of the organic sample types compared to that of the till. No sample type showed any tendency of having higher uranium concentration above mineralizations compared to background areas. These results suggest that, under conditions prevailing in Sweden, the investigated sample types are not suitable for uranium exploration

Uranium and the use of depleted uranium in weaponry; L'uranium et les armes a l'uranium appauvri

Energy Technology Data Exchange (ETDEWEB)

Roussel, R

2000-07-01

In this brief report the author shows that the use of shells involving a load of depleted uranium might lead to lasting hazards to civil population and environment. These hazards come from the part of the shell that has been dispersed as contaminating radioactive dusts. The author describes some features of radioactivity and highlights the role of Uranium-238 as a provider of energy to the planet. (A.C.)

Uranium deposits in Africa

International Nuclear Information System (INIS)

Wilpolt, R.H.; Simov, S.D.

1979-01-01

Africa is not only known for its spectacular diamond, gold, copper, chromium, platinum and phosphorus deposits but also for its uranium deposits. At least two uranium provinces can be distinguished - the southern, with the equatorial sub-province; and the south Saharan province. Uranium deposits are distributed either in cratons or in mobile belts, the first of sandstone and quartz-pebble conglomerate type, while those located in mobile belts are predominantly of vein and similar (disseminated) type. Uranium deposits occur within Precambrian rocks or in younger platform sediments, but close to the exposed Precambrian basement. The Proterozoic host rocks consist of sediments, metamorphics or granitoids. In contrast to Phanerozoic continental uranium-bearing sediments, those in the Precambrian are in marginal marine facies but they do contain organic material. The geology of Africa is briefly reviewed with the emphasis on those features which might control the distribution of uranium. The evolution of the African Platform is considered as a progressive reduction of its craton area which has been affected by three major Precambrian tectonic events. A short survey on the geology of known uranium deposits is made. However, some deposits and occurrences for which little published material is available are treated in more detail. (author)

Uranium chemistry: significant advances

International Nuclear Information System (INIS)

Mazzanti, M.

2011-01-01

The author reviews recent progress in uranium chemistry achieved in CEA laboratories. Like its neighbors in the Mendeleev chart uranium undergoes hydrolysis, oxidation and disproportionation reactions which make the chemistry of these species in water highly complex. The study of the chemistry of uranium in an anhydrous medium has led to correlate the structural and electronic differences observed in the interaction of uranium(III) and the lanthanides(III) with nitrogen or sulfur molecules and the effectiveness of these molecules in An(III)/Ln(III) separation via liquid-liquid extraction. Recent work on the redox reactivity of trivalent uranium U(III) in an organic medium with molecules such as water or an azide ion (N 3 - ) in stoichiometric quantities, led to extremely interesting uranium aggregates particular those involved in actinide migration in the environment or in aggregation problems in the fuel processing cycle. Another significant advance was the discovery of a compound containing the uranyl ion with a degree of oxidation (V) UO 2 + , obtained by oxidation of uranium(III). Recently chemists have succeeded in blocking the disproportionation reaction of uranyl(V) and in stabilizing polymetallic complexes of uranyl(V), opening the way to to a systematic study of the reactivity and the electronic and magnetic properties of uranyl(V) compounds. (A.C.)

Uranium 2007 resources, production and demand

CERN Document Server

Organisation for Economic Cooperation and Development. Paris

2008-01-01

Based on official information received from 40 countries, Uranium 2007 provides a comprehensive review of world uranium supply and demand as of 1st January 2007, as well as data on global uranium exploration, resources, production and reactor-related requirements. It provides substantive new information from major uranium production centres in Africa, Australia, Central Asia, Eastern Europe and North America. Projections of nuclear generating capacity and reactor-related uranium requirements through 2030 are also featured, along with an analysis of long-term uranium supply and demand issues. It finds that with rising demand and declining inventories, uranium prices have increased dramatically in recent years. As a result, the uranium industry is undergoing a significant revival, bringing to an end a period of over 20 years of underinvestment.

Moving to world's best uranium address

International Nuclear Information System (INIS)

Noakes, Frank

2006-01-01

Most exploration dollars spent in South Australia are focused on exploiting uranium. This is for good reason as South Australia is the world's best address for uranium. Pressure to cut CO 2 emissions and the ballistic growth of the Chinese and Indian economies has heightened expectations that the worldwide use of uranium for power generation will mushroom beyond its current 17% market share. The recent Australia-China deal only seems to confirm this; hence uranium's growing popularity among miners and explorers. Such is the attractiveness of uranium-related floats, when Toro Energy sought $18m in March it was swamped with more than three times share application volume. In the north west, Southern Gold and Hindmarsh Resources are expectantly drilling for commercial uranium deposits all around the acreage that hosts the Challenger gold mine in the Gawler Craton. The first exploration drilling for uranium in quaternary-age river channels will take place in South Australia's far north in May. Red Metal says while older and deeper tertiary river channels in the area that host the Beverley uranium mine were explored for uranium, the younger near-surface channel has not had a single hole drilled for uranium. This is despite the area being one of the 'hottest radiogenic terrains in South Australia'. The company will target calcrete-style uranium mineralisation similar to the Yerrlirrie deposit in Western Australia (52,000t U308). Tasman Resources will start drilling to test seven uranium targets within 30km of Olympic Dam, the world's largest known uranium deposit, later this year. Tasman also holds tenements adjoining the Warrior uranium deposit near Tarcoola that contains known radiometric anomalies within the 40km-long Wynbring paleochannels. They are the fourth largest uranium explorer in South Australia. Alliance Resources and its JV partner Quasar Resources are exploring the Beverley 4 Mile uranium prospect at Arkaroola. Quasar is an affiliate of Heathgate Resources

Sandstone-type uranium deposits

International Nuclear Information System (INIS)

Finch, W.I.; Davis, J.F.

1985-01-01

World-class sandstone-type uranium deposits are defined as epigenetic concentrations of uranium minerals occurring as uneven impregnations and minor massive replacements primarily in fluvial, lacustrine, and deltaic sandstone formations. The main purpose of this introductory paper is to define, classify, and introduce to the general geologic setting for sandstone-type uranium deposits

Removal of uranium from uranium plant wastewater using zero-valent iron in an ultrasonic field

Energy Technology Data Exchange (ETDEWEB)

Li, Jing; Zhang, Libo; Peng, Jinhui; Ma, Aiyuan; Xia, Hong Ying; Guo, Wen Qian; Yu, Xia [Yunnan Provincial Key Laboratory of Intensification Metallurgy, Kunming (China); Hu, Jinming; Yang, Lifeng [Nuclear Group Two Seven Two Uranium Industry Limited Liability Company, Hengyang (China)

2016-06-15

Uranium removal from uranium plant wastewater using zero-valent iron in an ultrasonic field was investigated. Batch experiments designed by the response surface methodology (RSM) were conducted to study the effects of pH, ultrasonic reaction time, and dosage of zero-valent iron on uranium removal efficiency. From the experimental data obtained in this work, it was found that the ultrasonic method employing zero-valent iron powder effectively removes uranium from uranium plant wastewater with a uranium concentration of 2,772.23 μg/L. The pH ranges widely from 3 to 7 in the ultrasonic field, and the prediction model obtained by the RSM has good agreement with the experimental results.

Uranium from phosphates to rabbit bones: Predicting dietary contribution to uranium deposition in animal bones

International Nuclear Information System (INIS)

Canella Avelar, A.; Motta Ferreira, W.; Menezes, M.

2014-01-01

Uranium is a hazardous element, both for radioactivity and metallotoxicity. Health implications of human overexposure to uranium are well documented: from reproduction impairment, liver and kidney diseases to some types of cancer. There are limited data in the modern literature concerning the levels of uranium in animal tissues and foods, as well the dietary daily intake of uranium is not fully known both for man and livestock. On the other hand, practically every phosphate and its products contain uranium in its structure. The average U content in agricultural phosphate may vary from 10 up to 390 ppm. In this particular feature, uranium can reach animal and man food chain by ingestion of feed and food grade phosphate containing U.

Extraction and desorption of accessible uranium

International Nuclear Information System (INIS)

Payne, T.

1987-01-01

The proportion of the uranium in natural ore samples which is in isotopic equilibrium with the uranium in the groundwater may be designated accessible uranium, and can be regarded as being in short-term exchange with the aqueous phase. Some of the natural uranium is secured in resistant crystalline minerals, and is described as inaccessible, because it may not be brought into solution unless the mineral is subjected to extreme chemical attack. It is not available for groundwater transport in the short term. An estimate of the proportion of accessible uranium is therefore useful when modeling radionuclide migration. The amount of accessible natural uranium is some uranium ore samples from the Ranger deposit has been determined by combining a sequential extraction with isotopic measurements of the extracted phases. The solid samples were crushed drill core form Ranger S1/146 which had previously been used for uranium adsorption experiments and therefore contained 236 U as well as natural uranium. This Section discusses how the uranium partitioning found with the sequential extraction procedure predicts the leaching behavior of these samples

Uranium

International Nuclear Information System (INIS)

Gabelman, J.W.; Chenoweth, W.L.; Ingerson, E.

1981-01-01

The uranium production industry is well into its third recession during the nuclear era (since 1945). Exploration is drastically curtailed, and many staffs are being reduced. Historical market price production trends are discussed. A total of 3.07 million acres of land was acquired for exploration; drastic decrease. Surface drilling footage was reduced sharply; an estimated 250 drill rigs were used by the uranium industry during 1980. Land acquisition costs increased 8%. The domestic reserve changes are detailed by cause: exploration, re-evaluation, or production. Two significant discoveries of deposits were made in Mohave County, Arizona. Uranium production during 1980 was 21,850 short tons U 3 O 8 ; an increase of 17% from 1979. Domestic and foreign exploration highlights were given. Major producing areas for the US are San Juan basin, Wyoming basins, Texas coastal plain, Paradox basin, northeastern Washington, Henry Mountains, Utah, central Colorado, and the McDermitt caldera in Nevada and Oregon. 3 figures, 8 tables

Industrial realities: Uranium

International Nuclear Information System (INIS)

Thiron, H.

1990-01-01

In this special issue are examined ores and metals in France and in the world for 1988. The chapter on uranium gives statistical data on the uranium market: Demand, production, prices and reserves [fr

Uranium mines of Tajikistan

International Nuclear Information System (INIS)

Razykov, Z.A; Gusakov, E.G.; Marushenko, A.A.; Botov, A.Yu.; Yunusov, M.M.

2002-12-01

The book describes location laws, the main properties of geological structure and industrial perspectives for known uranium mines of the Republic of Tajikistan. Used methods of industrial processing of uranium mines are described. The results of investigations of technological properties of main types of uranium ores and methods of industrial processing of some of them are shown. Main properties of uranium are shortly described as well as problems, connected with it, which arise during exploitation, mining and processing of uranium ores. The main methods of solution of these problems are shown. The book has interest for specialists of mining, geological, chemical, and technological fields as well as for students of appropriate universities. This book will be interested for usual reader, too, if they are interested in mineral resources of their country [ru

Recovery and treatment of uranium from uranium-containing solution by liquid membrane emulsion technology

International Nuclear Information System (INIS)

Xia Liangshu; Zhou Yantong; Xiao Yiqun; Peng Anguo; Xiao Jingshui; Chen Wei

2014-01-01

The recovery and treatment of uranium from uranium-containing solution using liquid membrane emulsion (LME) technology were studied in this paper, which contained the best volume ratio of membrane materials, stirring speed during emulsion process, the conditions of extracting, such as temperature, pH, initial concentration of uranium. Moreover, the mechanism for extracting uranium was also discussed. The best experimental conditions of emulsifying were acquired. The volume fractions of P 204 and liquid paraffin are 0.1 and 0.05, the volume ratios of Span80 and sulphonated kerosene to P 204 are 0.06 and 0.79 respectively, stirring speed is controlled in 2 000 r/min, and the concentration of inner phase is 4 mol/L. The recovery rate of uranium is up to 99% through the LME extracted uranium for 0.5 h at pH 2.5 and room temperature when the initial concentration is less than 400 mg/L and the volume ratio is 5 between the uranium-containing waste water and LME. The calculation results of Gibbs free energy show that the reaction process is spontaneous. (authors)

Uranium concentrations in groundwater, northeastern Washington

Science.gov (United States)

Kahle, Sue C.; Welch, Wendy B.; Tecca, Alison E.; Eliason, Devin M.

2018-04-18

A study of uranium in groundwater in northeastern Washington was conducted to make a preliminary assessment of naturally occurring uranium in groundwater relying on existing information and limited reconnaissance sampling. Naturally occurring uranium is associated with granitic and metasedimentary rocks, as well as younger sedimentary deposits, that occur in this region. The occurrence and distribution of uranium in groundwater is poorly understood. U.S. Environmental Protection Agency (EPA) regulates uranium in Group A community water systems at a maximum contaminant level (MCL) of 30 μg/L in order to reduce uranium exposure, protect from toxic kidney effects of uranium, and reduce the risk of cancer. However, most existing private wells in the study area, generally for single family use, have not been sampled for uranium. This document presents available uranium concentration data from throughout a multi-county region, identifies data gaps, and suggests further study aimed at understanding the occurrence of uranium in groundwater.The study encompasses about 13,000 square miles (mi2) in the northeastern part of Washington with a 2010 population of about 563,000. Other than the City of Spokane, most of the study area is rural with small towns interspersed throughout the region. The study area also includes three Indian Reservations with small towns and scattered population. The area has a history of uranium exploration and mining, with two inactive uranium mines on the Spokane Indian Reservation and one smaller inactive mine on the outskirts of Spokane. Historical (1977–2016) uranium in groundwater concentration data were used to describe and illustrate the general occurrence and distribution of uranium in groundwater, as well as to identify data deficiencies. Uranium concentrations were detected at greater than 1 microgram per liter (μg/L) in 60 percent of the 2,382 historical samples (from wells and springs). Uranium concentrations ranged from less than 1 to

Uranium dioxide pellets

International Nuclear Information System (INIS)

Zawidzki, T.W.

1982-01-01

A process for the preparation of a sintered, high density, large crystal grain size uranium dioxide pellet is described which involves: (i) reacting a uranyl nitrate of formula UO 2 (NO 3 ) 2 .6H 2 O with a sulphur source, at a temperature of from about 300 deg. C to provide a sulphur-containing uranium trioxide; (ii) reacting the thus-obtained modified uranium trioxide with ammonium nitrate to form an insoluble sulphur-containing ammonium uranate; (iii) neutralizing the thus-formed slurry with ammonium hydroxide to precipitate out as an insoluble ammonium uranate the remaining dissolved uranium; (iv) recovering the thus-formed precipitates in a dry state; (v) reducing the dry precipitate to UO 2 , and forming it into 'green' pellets; and (vi) sintering the pellets in a hydrogen atmosphere at an elevated temperature

Characterization of pyroxenes associated with the uranium mineralization of the Jazida Cachoeira (Lagoa Real Uranium Province, Bahia State, Brazil

International Nuclear Information System (INIS)

Goncalves, Rhaine Matos