42 CFR 460.40 - Violations for which CMS may impose sanctions.

Science.gov (United States)

2010-10-01

... 42 Public Health 4 2010-10-01 2010-10-01 false Violations for which CMS may impose sanctions. 460... for which CMS may impose sanctions. In addition to other remedies authorized by law, CMS may impose any of the sanctions specified in §§ 460.42 and 460.46 if CMS determines that a PACE organization...

Photon strength functions

International Nuclear Information System (INIS)

Bergqvist, I.

1976-01-01

Methods for extracting photon strength functions are briefly discussed. We follow the Brink-Axel approach to relate the strength functions to the giant resonances observed in photonuclear work and summarize the available data on the E1, E2 and M1 resonances. Some experimental and theoretical problems are outlined. (author)

Rotator Cuff Strength Ratio and Injury in Glovebox Workers

Energy Technology Data Exchange (ETDEWEB)

Weaver, Amelia M. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

2014-01-30

Rotator cuff integrity is critical to shoulder health. Due to the high workload imposed upon the shoulder while working in an industrial glovebox, this study investigated the strength ratio of the rotator cuff muscles in glovebox workers and compared this ratio to the healthy norm. Descriptive statistics were collected using a short questionnaire. Handheld dynamometry was used to quantify the ratio of forces produced in the motions of shoulder internal and external rotation. Results showed this population to have shoulder strength ratios that were significantly different from the healthy norm. The deviation from the normal ratio demonstrates the need for solutions designed to reduce the workload on the rotator cuff musculature of glovebox workers in order to improve health and safety. Assessment of strength ratios can be used to screen for risk of symptom development.

Effects of drought stress on seed sink strength and leaf protein ...

African Journals Online (AJOL)

Assimilate availability and the capacity to utilise them in the reproductive structures to a large extent determine reproductive sink establishment and yield of crops under drought stress. This study was carried out to investigate the effect of drought stress imposed at early pod-fill stage on seed sink strength of common bean ...

Strengths and weaknesses of Problem Based Learning from the professional perspective of registered nurses

Directory of Open Access Journals (Sweden)

María Cónsul-Giribet

2014-10-01

Full Text Available OBJECTIVE: to identify competency strengths and weaknesses as perceived by nursing professionals who graduated with a integrated curriculum and competency-based through Problem Based Learning in small groups.METHOD: an intrinsic case study method was used, which analyzes this innovation through former students (from the first class with three years of professional experience. The data were collected through a questionnaire and discussion groups.RESULTS: the results show that their competency level is valued in a very satisfactory manner. This level paradoxically contrasts with the lack of theoretical knowledge they perceived at the end of their education, when they started working in clinical practice.CONCLUSIONS: the teaching strategy was key to motivate an in-depth study and arouse the desire to know. In addition, Problem Based Learning favors and reinforces the decision to learn, which is that necessary in the course of professional life.

Interviewing to Understand Strengths

Science.gov (United States)

Hass, Michael R.

2018-01-01

Interviewing clients about their strengths is an important part of developing a complete understanding of their lives and has several advantages over simply focusing on problems and pathology. Prerequisites for skillfully interviewing for strengths include the communication skills that emerge from a stance of not knowing, developing a vocabulary…

Simon on problem solving

DEFF Research Database (Denmark)

Foss, Kirsten; Foss, Nicolai Juul

2006-01-01

as a general approach to problem solving. We apply these Simonian ideas to organisational issues, specifically new organisational forms. Specifically, Simonian ideas allow us to develop a morphology of new organisational forms and to point to some design problems that characterise these forms.......Two of Herbert Simon's best-known papers are 'The Architecture of Complexity' and 'The Structure of Ill-Structured Problems.' We discuss the neglected links between these two papers, highlighting the role of decomposition in the context of problems on which constraints have been imposed...

Cyber security issues imposed on nuclear power plants

International Nuclear Information System (INIS)

Kim, Do-Yeon

2014-01-01

Highlights: • Provide history of cyber attacks targeting at nuclear facilities. • Provide cyber security issues imposed on nuclear power plants. • Provide possible countermeasures for protecting nuclear power plants. - Abstract: With the introduction of new technology based on the increasing digitalization of control systems, the potential of cyber attacks has escalated into a serious threat for nuclear facilities, resulting in the advent of the Stuxnet. In this regard, the nuclear industry needs to consider several cyber security issues imposed on nuclear power plants, including regulatory guidelines and standards for cyber security, the possibility of Stuxnet-inherited malware attacks in the future, and countermeasures for protecting nuclear power plants against possible cyber attacks

Experimental investigation of exercise-related hedonic responses to preferred and imposed media content.

Science.gov (United States)

Frith, Emily; Loprinzi, Paul D

2018-01-01

Background: We evaluated the differential influence of preferred versus imposed media selections on distinct hedonic responses to an acute bout of treadmill walking. Methods: Twenty university students were recruited for this [160 person-visit] laboratory experiment, which employed a within-subject, counter-balanced design. Participants were exposed to 8 experimental conditions, including (1) Exercise Only, (2) Texting Only, (3) Preferred Phone Call, (4) Imposed Phone Call, (5) Preferred Music Playlist, (6) Imposed Music Playlist, (7)Preferred Video and (8) Imposed Video. During each visit (except Texting Only), participants completed a 10-minute bout of walking on the treadmill at a self-selected pace. Walking speed was identical for all experimental conditions. Before, at the midpoint of exercise, and post-exercise, participants completed the Feeling Scale (FS) and the Felt Arousal Scale (FAS) to measure acute hedonic response. The Affective Circumplex Scale was administered pre-exercise and post-exercise. Results: Significant pre-post change scores were observed for happy (Imposed Call: P=0.05;Preferred Music: P=0.02; Imposed Video: P=0.03), excited (Exercise Only: P=0.001; PreferredVideo: P=0.01; Imposed Video: P=0.03), sad (Preferred Music: P=0.05), anxious (ExerciseOnly: P=0.05; Preferred Video: P=0.01), and fatigue (Exercise Only: P=0.03; Imposed Video:P=0.002). For the FS all change scores were statistically significant from pre-to-mid and pre-topost (Pmedia platforms substantively influences hedonic responses to exercise. Implications of these findings are discussed.

The problem of maintenance of strength, lifetime and safety of the structural components operational NPP from items of a system approach

International Nuclear Information System (INIS)

Getman, A.F.

2005-01-01

The strength of the structural components and pipelines NPP determines largely their lifetime, radiation and nuclear safety. As shows world experience of operation NPP, in a series of cases during operation the local damages, breaks and destructions of elements of the equipment and pipelines emerge. These cases force maintaining organizations to execute on NPP large volumes of the control, repair and modernizing of the equipment and pipelines. These activities require large material inputs (net less than 50% of the cost of operation NPP), however not always are effective and in a series of cases do not allow to reach required of level reliability and safety. The reason of such condition of a problem is that the measures executed on NPP, developed on stretch of long time and under influence of the diverse factors. Besides until now there is no unified scientific methodology of a case study of maintenance of strength, lifetime and safety of the operational equipment and pipelines NPP. The application of a system approach to a problem of maintenance of strength, lifetime and safety of the equipment and pipelines operational NPP allows to consider a problem as a whole, from unified items, to define the most fast and effective paths it of the solution and to decide problems in as much as possible short times at minimum material inputs. The experience of practical application of a system approach at the solution of separate problems of operation NPP has allowed to develop a lot of effective new techniques, technologies and means, which application allows essentially to increase reliability and gamma percentage lifetime of elements NPP, to which they were applied. As an example in the report the outcomes of application of a system approach for maintenance of SG tubes integrity of reactors of a type WWER are adduced. The application of a system approach for all elements of the equipment and pipelines NPP will allow to increase it reliability and safety not less, than on 10

Vital Involvement Practice: strengths as more than tools for solving problems.

Science.gov (United States)

Kivnick, Helen Q; Stoffel, Sharon A

2005-01-01

This article describes Vital Involvement Practice, a strength-based approach to clinical practice with elders, including those who are extremely frail. Using this approach, practitioners have been able to help elders increase later-life vitality and associated positive quality of life through: (1) systematic identification of individual strengths and assets (found both in the person and in the surrounding environment), and (2) consideration of these strengths alongside the individual and environmental deficits that are the subject of most geriatric practice. The approach utilizes original data-gathering tools (Occupational Profile; Life Strengths Interview Guide) and a stepwise, worksheet- structured consideration of these data in order to formulate action strategies for achieving client goals (Domain Scan; Domain Goals; Life Plan/Strategy). All elements of VIP emerged in pilot work with gerontological practitioners and their elder clients in such settings as: primary health care; government social service; subsidized senior housing; private clinical practice; community recreation. Limitations, implications, and promise are noted, with respect to practice and research.

Simon on Problem-Solving

DEFF Research Database (Denmark)

Foss, Kirsten; Foss, Nicolai Juul

as a general approach to problem solving. We apply these Simonian ideas to organizational issues, specifically new organizational forms. Specifically, Simonian ideas allow us to develop a morphology of new organizational forms and to point to some design problems that characterize these forms.Keywords: Herbert...... Simon, problem-solving, new organizational forms. JEL Code: D23, D83......Two of Herbert Simon's best-known papers are "The Architecture of Complexity" and "The Structure of Ill-Structured Problems." We discuss the neglected links between these two papers, highlighting the role of decomposition in the context of problems on which constraints have been imposed...

Multi-material topology design of laminates with strength criteria

DEFF Research Database (Denmark)

Lund, Erik

2012-01-01

The objective of this paper is to present a novel approach for multi-material topology optimization of laminated composite structures where strength constraints are taken into account together with other global structural performance measures. The topology design problem considered contains very...... many design variables, and when strength criteria are included in the problem, a very large number of criteria functions must be considered in the optimization problem to be solved. Thus, block aggregation methods are introduced, such that global strength measures are obtained. These formulations...... are illustrated for multi-material laminated design problems where the maximum failure index is minimized while compliance and mass constraints are taken into account....

A simple method to impose rotations and concentrated moments on ANC beams

International Nuclear Information System (INIS)

Romero, Ignacio; Arribas, Juan J.

2009-01-01

Recently introduced ANC beam elements furnish a simple formulation that allows to solve nonlinear problems of beams, including those with large displacements and strains, as well as complex nonlinear (inelastic) materials. The success and simplicity of these finite elements is mainly due to the fact that the only nodal degrees of freedom that they employ are displacements, and rotations are thus completely avoided. This in turn makes it very difficult to apply concentrated moments or to impose rotations at specific nodes of a finite element mesh. In this article, we present a simple enhancement to this beam formulation that allows to apply these two types of boundary conditions in a simple manner, making ANC beam elements more versatile for both multibody and structural applications

DOCUMENT IMAGE REGISTRATION FOR IMPOSED LAYER EXTRACTION

Directory of Open Access Journals (Sweden)

Surabhi Narayan

2017-02-01

Full Text Available Extraction of filled-in information from document images in the presence of template poses challenges due to geometrical distortion. Filled-in document image consists of null background, general information foreground and vital information imposed layer. Template document image consists of null background and general information foreground layer. In this paper a novel document image registration technique has been proposed to extract imposed layer from input document image. A convex polygon is constructed around the content of the input and the template image using convex hull. The vertices of the convex polygons of input and template are paired based on minimum Euclidean distance. Each vertex of the input convex polygon is subjected to transformation for the permutable combinations of rotation and scaling. Translation is handled by tight crop. For every transformation of the input vertices, Minimum Hausdorff distance (MHD is computed. Minimum Hausdorff distance identifies the rotation and scaling values by which the input image should be transformed to align it to the template. Since transformation is an estimation process, the components in the input image do not overlay exactly on the components in the template, therefore connected component technique is applied to extract contour boxes at word level to identify partially overlapping components. Geometrical features such as density, area and degree of overlapping are extracted and compared between partially overlapping components to identify and eliminate components common to input image and template image. The residue constitutes imposed layer. Experimental results indicate the efficacy of the proposed model with computational complexity. Experiment has been conducted on variety of filled-in forms, applications and bank cheques. Data sets have been generated as test sets for comparative analysis.

Problems in Standardization of Orthodontic Shear Bond Strength Tests; A Brief Review

Directory of Open Access Journals (Sweden)

M.S. A. Akhoundi

2005-03-01

Full Text Available Bonding brackets to the enamel surface has gained much popularity today. New adhesive systems have been introduced and marketed and a considerable increase in research regarding bond strength has been published. A considerable amount of these studies deal with shear bond strength of adhesives designed for orthodontic purpose.Previous studies have used variety of test designs. This diversity in test design is due to the fact that there is no standard method for evaluating shear bond strength in orthodontics. Therefore comparison of data obtained from different study is almost impossible.This article tries to briefly discuss the developments occurred in the process of shear bond strength measurement of orthodontic adhesives with an emphasis on the type of test set up and load application.Although the test designs for measuring shear bond strength in orthodontics are still far from ideal, attempts must be made to standardize these tests especially in order to makecomparison of different data easier. It is recommended that test designs be set up in such a manner that better matches with the purpose of the study.

Economic Impact of Imposing Excise Tax on Plastic Bottles of Drinks

Directory of Open Access Journals (Sweden)

Eugenia Mardanugraha

2018-03-01

Full Text Available This research simulates the effect of imposing excise tax on plastic container of drinks towards economic performance of beverage industry in Indonesia and governmentâ˘A ´Zs tax revenue. The results showed that by imposing excise tax on plastic cups and plastic bottles the government would lose tax revenue from value added tax (PPN and corporate income tax (PPh badan more than they gain additional revenue from excise tax. Hence, imposing excise tax on drink containers should serve a clear purpose and an undeniable reason. This paper recommends the government to develop proper excise infrastructure to extend the goods or services to be taxed. This paper also recommends the required stages for extending the excise tax.

Imposed currents in galvanic cells

International Nuclear Information System (INIS)

Biesheuvel, P.M.; Soestbergen, M. van; Bazant, M.Z.

2009-01-01

We analyze the steady-state behavior of a general mathematical model for reversible galvanic cells, such as redox flow cells, reversible solid oxide fuel cells, and rechargeable batteries. We consider not only operation in the galvanic discharging mode, spontaneously generating a positive current against an external load, but also operation in two modes which require a net input of electrical energy: (i) the electrolytic charging mode, where a negative current is imposed to generate a voltage exceeding the open-circuit voltage, and (ii) the 'super-galvanic' discharging mode, where a positive current exceeding the short-circuit current is imposed to generate a negative voltage. Analysis of the various (dis-)charging modes of galvanic cells is important to predict the efficiency of electrical to chemical energy conversion and to provide sensitive tests for experimental validation of fuel cell models. In the model, we consider effects of diffuse charge on electrochemical charge-transfer rates by combining a generalized Frumkin-Butler-Volmer equation for reaction kinetics across the compact Stern layer with the full Poisson-Nernst-Planck transport theory, without assuming local electroneutrality. Since this approach is rare in the literature, we provide a brief historical review. To illustrate the general theory, we present results for a monovalent binary electrolyte, consisting of cations, which react at the electrodes, and non-reactive anions, which are either fixed in space (as in a solid electrolyte) or are mobile (as in a liquid electrolyte). The full model is solved numerically and compared to analytical results in the limit of thin diffuse layers, relative to the membrane thickness. The spatial profiles of the ion concentrations and electrostatic potential reveal a complex dependence on the kinetic parameters and the imposed current, in which the diffuse charge at each electrode and the total membrane charge can have either sign, contrary perhaps to intuition

Terapascal static pressure generation with ultrahigh yield strength nanodiamond.

Science.gov (United States)

Dubrovinskaia, Natalia; Dubrovinsky, Leonid; Solopova, Natalia A; Abakumov, Artem; Turner, Stuart; Hanfland, Michael; Bykova, Elena; Bykov, Maxim; Prescher, Clemens; Prakapenka, Vitali B; Petitgirard, Sylvain; Chuvashova, Irina; Gasharova, Biliana; Mathis, Yves-Laurent; Ershov, Petr; Snigireva, Irina; Snigirev, Anatoly

2016-07-01

Studies of materials' properties at high and ultrahigh pressures lead to discoveries of unique physical and chemical phenomena and a deeper understanding of matter. In high-pressure research, an achievable static pressure limit is imposed by the strength of available strong materials and design of high-pressure devices. Using a high-pressure and high-temperature technique, we synthesized optically transparent microballs of bulk nanocrystalline diamond, which were found to have an exceptional yield strength (~460 GPa at a confining pressure of ~70 GPa) due to the unique microstructure of bulk nanocrystalline diamond. We used the nanodiamond balls in a double-stage diamond anvil cell high-pressure device that allowed us to generate static pressures beyond 1 TPa, as demonstrated by synchrotron x-ray diffraction. Outstanding mechanical properties (strain-dependent elasticity, very high hardness, and unprecedented yield strength) make the nanodiamond balls a unique device for ultrahigh static pressure generation. Structurally isotropic, homogeneous, and made of a low-Z material, they are promising in the field of x-ray optical applications.

Processing of Cu-Cr alloy for combined high strength and high conductivity

Directory of Open Access Journals (Sweden)

A.O Olofinjanaa

2017-11-01

Full Text Available High strength and high conductivity (HSHC are two intrinsic properties difficult to combine in metallic alloy design because; almost all strengthening mechanisms also lead to reduced conductivity. Precipitation hardening by nano-sized precipitates had proven to be the most adequate way to achieve the optimum combination of strength and conductivity in copper based alloys. However, established precipitation strengthened Cu- alloys are limited to very dilute concentration of solutes thereby limiting the volume proportion hardening precipitates. In this work, we report the investigation of the reprocessing of higher Cr concentration Cu- based alloys via rapid solidification. It is found that the rapid solidification in the as-cast ribbon imposed combined solution extension and ultra-refinement of Cr rich phases. X-ray diffraction evidences suggest that the solid solution extension was up to 6wt%Cr. Lattice parameters determined confirmed the many folds extension of solid solution of Cr in Cu.  Thermal aging studies of the cast ribbons indicated that peak aging treatments occurred in about twenty minutes. Peak aged hardness ranged from about 200 to well over 300Hv. The maximum peak aged hardness of 380Hv was obtained for alloy containing 6wt.%Cr but with conductivity of about 50%IACS. The best combined strength/conductivity was obtained for 4wt.%Cr  alloy with hardness of 350HV and conductivity of 80% IACS. The high strengths observed are attributed to the increased volume proportion of semi-coherent Cr rich nano-sized precipitates that evolved from the supersaturated solid solution of Cu-Cr that was achieved from the high cooling rates imposed by the ribbon casting process. The rapid overaging of the high Cr concentration Cu-Cr alloy is still a cause for concern in optimising the process for reaching peak HSHC properties. It is still important to investigate a microstructural design to slow or severely restrict the overaging process. The optimum

42 CFR 422.758 - Collection of civil money penalties imposed by CMS.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Collection of civil money penalties imposed by CMS... § 422.758 Collection of civil money penalties imposed by CMS. (a) When an MA organization does not request a hearing, CMS initiates collection of the civil money penalty following the expiration of the...

Arc Motion in an Obliquely Imposed Alternating Magnetic Field

International Nuclear Information System (INIS)

Akiho, R; Takeda, K; Sugimoto, M

2012-01-01

The arc motion is theoretically investigated under an alternating magnetic field imposed obliquely to the arc. The arc is known to oscillate on a 2-D plane when the alternating magnetic field is imposed perpendicularly to the arc. If the alternating magnetic field is imposed obliquely to the arc, then it is expected that the arc oscillates not on the 2-D plane but in a 3-D space. For this study, 3-D simulation was performed on the motion of the plasma gas under an alternating magnetic field crossing obliquely to the arc. It was also assumed that a stream line of the plasma gas represented the arc profile. The momentum equation for the plasma gas was solved together with the continuity equation. Governing parameters for the gas motion are θ (crossing angle), v 0 (initial velocity of the plasma gas), and λ. Parameter λ is defined as λ = (I a B 0 )/Q 0 . Numerical results are reported under different operating conditions such as magnetic flux densities and the angles between the arc and the magnetic flux. If the crossing angle is larger than 4/π, the arc might be extinguished because of the drastic increase of the arc length.

42 CFR 423.758 - Collection of civil money penalties imposed by CMS.

Science.gov (United States)

2010-10-01

... 42 Public Health 3 2010-10-01 2010-10-01 false Collection of civil money penalties imposed by CMS... Intermediate Sanctions § 423.758 Collection of civil money penalties imposed by CMS. (a) When a Part D plan sponsor does not request a hearing CMS initiates collection of the civil money penalty following the...

High-energy behavior of field-strength interactions

International Nuclear Information System (INIS)

Levin, D.N.

1976-01-01

It is known that spontaneously broken gauge theories are the only renormalizable theories of massive spin-one particles with mass dimension less than or equal to 4. This paper describes a search for renormalizable interactions with higher mass dimension. Specifically, we examine the high-energy behavior of a class of models which involve field-strength interactions. Power counting shows that the high-energy behavior of these models is no worse than the naively estimated high-energy behavior of a gauge theory in the U gauge. Therefore, there may be a ''soft'' symmetry-breaking mechanism (for instance, a soft divergence of an antisymmetric tensor current) which enforces renormalizable high-energy behavior in the same way that spontaneously broken gauge invariance guarantees the renormalizability of gauge theories. This hope is supported by the existence of ''gauge theories'' of strings, which describe analogous interactions of strings and field strengths. Unfortunately, this idea is tarnished by explicit calculations in which renormalizability is imposed in the form of unitarity bounds. These unitarity bounds imply that all possible field-strength couplings must be zero and that the remaining interactions describe a spontaneously broken gauge theory. Thus this result supports an earlier conjecture that gauge theories are the only renormalizable theories of massive vector bosons

Effects of dependence in high-dimensional multiple testing problems

Directory of Open Access Journals (Sweden)

van de Wiel Mark A

2008-02-01

Full Text Available Abstract Background We consider effects of dependence among variables of high-dimensional data in multiple hypothesis testing problems, in particular the False Discovery Rate (FDR control procedures. Recent simulation studies consider only simple correlation structures among variables, which is hardly inspired by real data features. Our aim is to systematically study effects of several network features like sparsity and correlation strength by imposing dependence structures among variables using random correlation matrices. Results We study the robustness against dependence of several FDR procedures that are popular in microarray studies, such as Benjamin-Hochberg FDR, Storey's q-value, SAM and resampling based FDR procedures. False Non-discovery Rates and estimates of the number of null hypotheses are computed from those methods and compared. Our simulation study shows that methods such as SAM and the q-value do not adequately control the FDR to the level claimed under dependence conditions. On the other hand, the adaptive Benjamini-Hochberg procedure seems to be most robust while remaining conservative. Finally, the estimates of the number of true null hypotheses under various dependence conditions are variable. Conclusion We discuss a new method for efficient guided simulation of dependent data, which satisfy imposed network constraints as conditional independence structures. Our simulation set-up allows for a structural study of the effect of dependencies on multiple testing criterions and is useful for testing a potentially new method on π0 or FDR estimation in a dependency context.

A Variable Neighborhood Search Algorithm for the Leather Nesting Problem

Directory of Open Access Journals (Sweden)

Cláudio Alves

2012-01-01

Full Text Available The leather nesting problem is a cutting and packing optimization problem that consists in finding the best layout for a set of irregular pieces within a natural leather hide with an irregular surface and contour. In this paper, we address a real application of this problem related to the production of car seats in the automotive industry. The high quality requirements imposed on these products combined with the heterogeneity of the leather hides make the problem very complex to solve in practice. Very few results are reported in the literature for the leather nesting problem. Furthermore, the majority of the approaches impose some additional constraints to the layouts related to the particular application that is considered. In this paper, we describe a variable neighborhood search algorithm for the general leather nesting problem. To evaluate the performance of our approaches, we conducted an extensive set of computational experiments on real instances. The results of these experiments are reported at the end of the paper.

Hand grip strength

DEFF Research Database (Denmark)

Frederiksen, Henrik; Gaist, David; Petersen, Hans Christian

2002-01-01

in life is a major problem in terms of prevalence, morbidity, functional limitations, and quality of life. It is therefore of interest to find a phenotype reflecting physical functioning which has a relatively high heritability and which can be measured in large samples. Hand grip strength is known......-55%). A powerful design to detect genes associated with a phenotype is obtained using the extreme discordant and concordant sib pairs, of whom 28 and 77 dizygotic twin pairs, respectively, were found in this study. Hence grip strength is a suitable phenotype for identifying genetic variants of importance to mid...

Strength conditions for the elastic structures with a stress error

Science.gov (United States)

Matveev, A. D.

2017-10-01

As is known, the constraints (strength conditions) for the safety factor of elastic structures and design details of a particular class, e.g. aviation structures are established, i.e. the safety factor values of such structures should be within the given range. It should be noted that the constraints are set for the safety factors corresponding to analytical (exact) solutions of elasticity problems represented for the structures. Developing the analytical solutions for most structures, especially irregular shape ones, is associated with great difficulties. Approximate approaches to solve the elasticity problems, e.g. the technical theories of deformation of homogeneous and composite plates, beams and shells, are widely used for a great number of structures. Technical theories based on the hypotheses give rise to approximate (technical) solutions with an irreducible error, with the exact value being difficult to be determined. In static calculations of the structural strength with a specified small range for the safety factors application of technical (by the Theory of Strength of Materials) solutions is difficult. However, there are some numerical methods for developing the approximate solutions of elasticity problems with arbitrarily small errors. In present paper, the adjusted reference (specified) strength conditions for the structural safety factor corresponding to approximate solution of the elasticity problem have been proposed. The stress error estimation is taken into account using the proposed strength conditions. It has been shown that, to fulfill the specified strength conditions for the safety factor of the given structure corresponding to an exact solution, the adjusted strength conditions for the structural safety factor corresponding to an approximate solution are required. The stress error estimation which is the basis for developing the adjusted strength conditions has been determined for the specified strength conditions. The adjusted strength

Strength and Conditioning Training by the Danish National Handball Team Before an Olympic Tournament.

Science.gov (United States)

Kvorning, Thue; Hansen, Mikkel R B; Jensen, Kurt

2017-07-01

Kvorning, T, Hansen, MRB, and Jensen, K. Strength and conditioning training by the Danish national handball team before an Olympic tournament. J Strength Cond Res 31(7): 1759-1765, 2017-The physical demands imposed on national team handball teams during the Olympics imply significant physical preparation to improve performance and reduce incidence of injuries. The purpose of this case report was to describe and analyze the strength and conditioning (S&C) training performed by the Danish national handball team before the Beijing Olympic Games. Eight weeks of S&C was divided into 5 weeks emphasizing muscle hypertrophy and long-interval running followed by 3 weeks emphasizing strength, power, and short-interval running. Body mass increased by 1.6% (p 0.05). Agility performance was evaluated by a T-test and improved by 2.5% (p handball teams preparing for competition. Detailed and periodized S&C training programs for 8 weeks are provided and can be used by teams ranging from moderately to highly trained.

Diagnostic interface problems on TFTR

International Nuclear Information System (INIS)

Goldfarb, S.

1977-01-01

Diagnostic equipment on TFTR has functional interfaces with many machine systems. Salient requirements include plasma access, environmental resistance to thermal, magnetic and radiation effects, automated data acquisition and controls, remote handling and personnel safety. Problems imposed by these requirements and the solutions being considered are described

42 CFR 423.756 - Procedures for imposing intermediate sanctions and civil money penalties.

Science.gov (United States)

2010-10-01

... BENEFIT Intermediate Sanctions § 423.756 Procedures for imposing intermediate sanctions and civil money... civil money penalties. 423.756 Section 423.756 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... sanctions have been imposed, CMS may require a Part D plan sponsor to market or to accept enrollments or...

The three-body problem

International Nuclear Information System (INIS)

Musielak, Z E; Quarles, B

2014-01-01

The three-body problem, which describes three masses interacting through Newtonian gravity without any restrictions imposed on the initial positions and velocities of these masses, has attracted the attention of many scientists for more than 300 years. In this paper, we present a review of the three-body problem in the context of both historical and modern developments. We describe the general and restricted (circular and elliptic) three-body problems, different analytical and numerical methods of finding solutions, methods for performing stability analysis and searching for periodic orbits and resonances. We apply the results to some interesting problems of celestial mechanics. We also provide a brief presentation of the general and restricted relativistic three-body problems, and discuss their astronomical applications. (review article)

Militarised violence in the service of state-imposed emergencies over Palestine and Kenya

Directory of Open Access Journals (Sweden)

Annie Pfingst

2015-02-01

Full Text Available States of Emergency are declared against the disorder-ing of state sovereign power by acts of resistance, rebellion and revolt and are characterised by the technologies of control, containment and punishment. Through spatial, archival and visual encounters with emergency landscapes and the geographies of resistance, the essay considers the historic and contemporary operations, provisions, regulations and practices authorised under state-imposed emergencies. It does so in order firstly, to bring attention to the practices authorised through state-imposed emergencies and the currency and saliency of their ongoing effects, and secondly to re-frame the militarised violence of settlement/occupation as an integral part of state-imposed emergencies in which all that is necessary will be done to protect the sovereign state from the resistance of the colonised/occupied and to effect a return to ‘order’.     Through encounters with the archival record, and the architectures, remnants and territorial arrangements found in post-colonial Kenya and across the multiple geographies of Palestine, the essay draws out seven clusters of state imposed emergency practices and effects. The work grapples with a number of questions: what is it that a declared state of emergency performs for the state? Does a state of emergency enable particular forms of militarised violence? Are there common practices to be found across different modes of state-imposed emergencies? What is the genealogy to the states of emergency across Palestine and Kenya? Does our excavation of the practices of state-imposed emergency shed light on the ways we apprehend state violence in colonial, post-colonial and neo-colonial geographies?

High-strength structural steels; their properties, and the problems encountered during the welding process

International Nuclear Information System (INIS)

Uwer, D.

1978-01-01

High-strength structural steels, manufacture, properties. Requirements to be met by the welded joints of high-strength structural steels. Influence of the welding conditions on the mechanical properties in the heat-affected zone. Cold-cracking behaviour of welded joints. Economic efficiency of high-strength structural steels. Applications. (orig.) [de

A Methodology for Reducing Bench Strength in Information Technology Companies

Directory of Open Access Journals (Sweden)

Boby John

2015-07-01

Full Text Available One of the major risks in information technology (IT project execution is the non-availability of resources with required skill sets to meet the project demands. To mitigate this risk, almost every IT organization maintains a portion of their resources on bench. The bench strength reduces the delay in starting the project due to the non-availability of skilled resources. But bench strength or buffer is cost to the company. A medium scale Indian IT company incurs around USD 142,347 monthly on maintaining the bench strength. Hence this study is undertaken to develop a methodology to reduce the bench strength in IT companies. The proposed methodology is to obtain an optimum mix of resources from bench and through recruitment to meet the demands at a minimum cost. This is done by formulating the problem as an integer programming problem. The problem aims to minimize the total cost of obtaining the skilled resources without violating the constraints on demand, bench strength availability and recruitment lead time. The problem can be solved using Microsoft excel solver function or any other optimization packages like CPLEX, Gurobi, etc. A case study on the application of proposed methodology is also discussed in the paper. The case study showed that the proposed methodology is superior to the existing practice of maintaining large bench strengths to meet the demands for resources with various skills.

Strength Gain Properties up to five-year age of high-strength mass concrete

International Nuclear Information System (INIS)

Mitarai, Y.; Shigenobu, M.; Hiramine, T.; Inoue, K.; Nakane, S.; Ohike, T.

1991-01-01

Genkai No.3 plant of Kyushu Electric Power Co., Inc. presently under construction is a PWR type nuclear power plant with 1180 MW power output, and a prestressed concrete containment vessel (PCCV) was adopted for the reactor. The concrete used for the construction of the PCCV is the mass concrete with the wall thickness of 1.3 m in the general parts of the cylinder, and about 2 m at buttresses. It is the high strength concrete of the specified strength 420 kgf/cm 2 . As the preliminary study for the construction using such high strength mass concrete, the examination was carried out on the strength gain property of structural concrete using full scale simulated members. The various problems in the quality control were contemplated based on the results of the examination, and were reflected to actual construction, designating 13 weeks as the age for strength control, in order to build the concrete structures with high reliability. In this report, the outline of the study on the strength gain up to 5 year age carried out in the preliminary study is discussed. The experimental method, the method of evaluating structural strength, the mixing proportion of concrete and the results are reported. (K.I.)

Correlation Filter Learning Toward Peak Strength for Visual Tracking.

Science.gov (United States)

Sui, Yao; Wang, Guanghui; Zhang, Li

2018-04-01

This paper presents a novel visual tracking approach to correlation filter learning toward peak strength of correlation response. Previous methods leverage all features of the target and the immediate background to learn a correlation filter. Some features, however, may be distractive to tracking, like those from occlusion and local deformation, resulting in unstable tracking performance. This paper aims at solving this issue and proposes a novel algorithm to learn the correlation filter. The proposed approach, by imposing an elastic net constraint on the filter, can adaptively eliminate those distractive features in the correlation filtering. A new peak strength metric is proposed to measure the discriminative capability of the learned correlation filter. It is demonstrated that the proposed approach effectively strengthens the peak of the correlation response, leading to more discriminative performance than previous methods. Extensive experiments on a challenging visual tracking benchmark demonstrate that the proposed tracker outperforms most state-of-the-art methods.

Strengths perspective among the homeless adolescents: A systematic review

Directory of Open Access Journals (Sweden)

Janmejaya Samal

2017-01-01

Full Text Available Background: Earlier, the scholars of family studies have primarily focused on the problems and weaknesses of the families. However, during these days, there is a shift from problems to strength-based perspective. Methodology: Search of literature was carried out through internet-based Google Scholar search engine. Of the 112 titles obtained 21 titles fit the criteria of the study objectives, of which 9 full-text articles were finally selected for the purpose of this review. Results: In this review, nine full-text articles were reviewed. Nine of these researches investigated different facets of strengths perspective among the homeless adolescents. Chronologically, nine of these reviewed studies delineated the following thematic facets of strengths perspective among the homeless adolescents. These include personal strength and informal resources, personal strength in high-risk environment, strengths perspective during the transition of adolescence to adulthood, personal and social strengths that refrained the homeless adolescents form intravenous drug use, resilience and self-esteem, religion as an important strength, “hope” as a way of living among the homeless adolescents, coping strategies of street-involved youth, and usage of internet and social media as an important strength among homeless adolescents. Conclusion: Strengths perspective helps the youth to become a master of their own lives and helps to deal with all the adversities in life.

Validating office-based screening for psychosocial strengths and difficulties among youths in foster care.

Science.gov (United States)

Jee, Sandra H; Szilagyi, Moira; Conn, Anne-Marie; Nilsen, Wendy; Toth, Sheree; Baldwin, Constance D; Szilagyi, Peter G

2011-05-01

To assess the effectiveness of social-emotional screening in the primary care setting for youths in foster care. The setting was a primary care practice for all youth in home-based foster care in 1 county. Subjects were youths, aged 11 to 17 years, and their foster parents; both completed a Strengths and Difficulties Questionnaire at well-child visits. The Strengths and Difficulties Questionnaire is a previously validated 25-item tool that has 5 domains: emotional symptoms; conduct problems; hyperactivity/inattention; peer problems; and prosocial behaviors and an overall total difficulties score. We first compared youth versus parent Strengths and Difficulties Questionnaire scores and then assessed the accuracy of these Strengths and Difficulties Questionnaire scores by comparing them in a subsample of youths (n = 50) with results of home-based structured clinical interviews using the Children's Interview for Psychiatric Syndromes. Of 138 subjects with both youth and parent reports, 78% had prosocial behaviors (strengths), and 70% had 1 or more social-emotional problems. Parents reported significantly more conduct problems (38% vs 16%; P youth. The Strengths and Difficulties Questionnaire had better agreement with the Children's Interview for Psychiatric Syndromes (n = 50) for any Strengths and Difficulties Questionnaire-identified problem for combined youth and foster-parent reports (93%), compared with youth report alone (54%) or parent report alone (71%). Although most youths in foster care have social-emotional problems, most have strengths as well. Youth and foster-parent perspectives on these problems differ. Systematic social-emotional screening in primary care that includes both youth and parent reports can identify youths who may benefit from services.

42 CFR 423.760 - Determinations regarding the amount of civil money penalties and assessment imposed by CMS.

Science.gov (United States)

2010-10-01

... penalties and assessment imposed by CMS. 423.760 Section 423.760 Public Health CENTERS FOR MEDICARE... penalties and assessment imposed by CMS. (a) Determining the appropriate amount of any penalty. In determining the amount of penalty imposed under 423.752(c)(1), CMS will consider as appropriate: (1) The...

Alignment to natural and imposed mismatches between the senses

NARCIS (Netherlands)

van der Kooij, K.; Brenner, E.; van Beers, R.J.; Schot, W.D.; Smeets, J.B.J.

2013-01-01

Does the nervous system continuously realign the senses so that objects are seen and felt in the same place? Conflicting answers to this question have been given. Research imposing a sensory mismatch has provided evidence that the nervous system realigns the senses to reduce the mismatch. Other

42 CFR 422.760 - Determinations regarding the amount of civil money penalties and assessment imposed by CMS.

Science.gov (United States)

2010-10-01

... penalties and assessment imposed by CMS. 422.760 Section 422.760 Public Health CENTERS FOR MEDICARE... assessment imposed by CMS. (a) Determining the appropriate amount of any penalty. In determining the amount of penalty imposed under 422.752(c)(1), CMS will consider as appropriate: (1) The nature of the...

The Effect of Wetting Gravity Regime on Shear Strength of SAC and Sn-Pb Solder Lap Joints

Science.gov (United States)

Sona, Mrunali; Prabhu, K. Narayan

2017-09-01

The failure of solder joints due to imposed stresses in an electronic assembly is governed by shear bond strength. In the present study, the effect of wetting gravity regime on single-lap shear strength of Sn-0.3Ag-0.7Cu and Sn-2.5Ag-0.5Cu solder alloys reflowed between bare copper substrates as well as Ni-coated Cu substrates was investigated. Samples were reflowed for 10 s, T gz (time corresponding to the end of gravity regime) and 100 s individually and tested for single-lap shear strength. The single-lap shear test was also carried out on eutectic Sn-Pb/Cu- and Sn-Pb/Ni-coated Cu specimens to compare the shear strength values obtained with those of lead-free alloys. The eutectic Sn-Pb showed significantly higher ultimate shear strength on bare Cu substrates when compared to Sn-Ag-Cu alloys. However, SAC alloys reflowed on nickel-coated copper substrate exhibited higher shear strength when compared to eutectic Sn-Pb/Ni-coated Cu specimens. All the substrate/solder/substrate lap joint specimens that were reflowed for the time corresponding to the end of gravity regime exhibited maximum ultimate shear strength.

Constraints on effective interactions imposed by antisymmetry and charge independence

Energy Technology Data Exchange (ETDEWEB)

Stringari, S [Trento Univ. (Italy). Dipartimento di Matematica e Fisica; Brink, D M [Oxford Univ. (UK). Dept. of Theoretical Physics

1978-07-24

Restrictions on the form of the energy functional following antisymmetry and charge independence have been investigated for a Hartree-Fock theory based on effective interactions. These restrictions impose severe constraints on density dependent effective interactions.

Mesoscale Benchmark Demonstration Problem 1: Mesoscale Simulations of Intra-granular Fission Gas Bubbles in UO2 under Post-irradiation Thermal Annealing

Energy Technology Data Exchange (ETDEWEB)

Li, Yulan; Hu, Shenyang Y.; Montgomery, Robert; Gao, Fei; Sun, Xin; Tonks, Michael; Biner, Bullent; Millet, Paul; Tikare, Veena; Radhakrishnan, Balasubramaniam; Andersson , David

2012-04-11

A study was conducted to evaluate the capabilities of different numerical methods used to represent microstructure behavior at the mesoscale for irradiated material using an idealized benchmark problem. The purpose of the mesoscale benchmark problem was to provide a common basis to assess several mesoscale methods with the objective of identifying the strengths and areas of improvement in the predictive modeling of microstructure evolution. In this work, mesoscale models (phase-field, Potts, and kinetic Monte Carlo) developed by PNNL, INL, SNL, and ORNL were used to calculate the evolution kinetics of intra-granular fission gas bubbles in UO2 fuel under post-irradiation thermal annealing conditions. The benchmark problem was constructed to include important microstructural evolution mechanisms on the kinetics of intra-granular fission gas bubble behavior such as the atomic diffusion of Xe atoms, U vacancies, and O vacancies, the effect of vacancy capture and emission from defects, and the elastic interaction of non-equilibrium gas bubbles. An idealized set of assumptions was imposed on the benchmark problem to simplify the mechanisms considered. The capability and numerical efficiency of different models are compared against selected experimental and simulation results. These comparisons find that the phase-field methods, by the nature of the free energy formulation, are able to represent a larger subset of the mechanisms influencing the intra-granular bubble growth and coarsening mechanisms in the idealized benchmark problem as compared to the Potts and kinetic Monte Carlo methods. It is recognized that the mesoscale benchmark problem as formulated does not specifically highlight the strengths of the discrete particle modeling used in the Potts and kinetic Monte Carlo methods. Future efforts are recommended to construct increasingly more complex mesoscale benchmark problems to further verify and validate the predictive capabilities of the mesoscale modeling

Correcting false information in memory: manipulating the strength of misinformation encoding and its retraction.

Science.gov (United States)

Ecker, Ullrich K H; Lewandowsky, Stephan; Swire, Briony; Chang, Darren

2011-06-01

Information that is presumed to be true at encoding but later on turns out to be false (i.e., misinformation) often continues to influence memory and reasoning. In the present study, we investigated how the strength of encoding and the strength of a later retraction of the misinformation affect this continued influence effect. Participants read an event report containing misinformation and a subsequent correction. Encoding strength of the misinformation and correction were orthogonally manipulated either via repetition (Experiment 1) or by imposing a cognitive load during reading (Experiment 2). Results suggest that stronger retractions are effective in reducing the continued influence effects associated with strong misinformation encoding, but that even strong retractions fail to eliminate continued influence effects associated with relatively weak encoding. We present a simple computational model based on random sampling that captures this effect pattern, and conclude that the continued influence effect seems to defy most attempts to eliminate it.

Polynomial expansions and transition strengths

International Nuclear Information System (INIS)

Draayer, J.P.

1980-01-01

The subject is statistical spectroscopy applied to determining strengths and strength sums of excitation processes in nuclei. The focus will be on a ds-shell isoscalar E2 study with detailed shell-model results providing the standard for comparison; similar results are available for isovector E2 and M1 and E4 transitions as well as for single-particle transfer and ν +- decay. The present study is intended to serve as a tutorial for applications where shell-model calculations are not feasible. The problem is posed and a schematic theory for strengths and sums is presented. The theory is extended to include the effect of correlations between H, the system Hamiltonian, and theta, the excitation operator. Associated with correlation measures is a geometry that can be used to anticipate the goodness of a symmetry. This is illustrated for pseudo SU(3) in the fp-shell. Some conclusions about fluctuations and collectivity that one can deduce from the statistical results for strengths are presented

Effects of imposed monitoring and blunting strategies on emotional reactivity

NARCIS (Netherlands)

Muris, Peter; Jong, de Peter; Merckelbach, Harald; van Zuuren, Florence J.

1994-01-01

The present study examined the effects of imposed monitoring and blunting coping strategies on emotional reactivity in 40 subjects who prepared themselves for upcoming neutral and aversive slides. Besides subjective indices, electrodermal measures and eye blink startle responses were used to

Strength evaluation of top nozzle holddown spring screw for nuclear fuel assembly

International Nuclear Information System (INIS)

Koh, S. K.; Won, S. Y.; Ryu, C. H.; Kim, Y. J.; Lee, K. S.; Jeon, K. L.

2002-01-01

Holddown springs are required to maintain the nuclear fuel assembly in contact with lower core plate and permit thermal and irradiation-induced length changes. Therefore, the holddown spring screw must be designed such that it is capable of sustaining the loads imposed by the initial tensile preload and operational loads. Prior to assessing the structural integrity of the spring screw in the corrosive and irradiating environment throughout the design lifetime of the fuel assembly, the strength evaluation of screw was made in this paper using the mechanics of materials and finite element methods. Calculations based on the mechanics of materials, showed that the preloaded screw with an operating holddown force had a quite large margin of safety in strength. However, the elastic-plastic finite element analysis showed that the local stresses at the critical regions of head-shank fillet and thread root significantly exceeded than the yield strength of the screw material, resulting in local plastic deformation. Preloading on the screw applied for tightening had beneficial effects on the screw strength by reducing the stress level at the critical regions, compared to the screw without preload. Calculated spring deflection using the finite element analysis was in close agreement with the experimentally measured deflection

Reducing the Strength: a mixed methods evaluation of alcohol retailers' willingness to voluntarily reduce the availability of low cost, high strength beers and ciders in two UK local authorities.

Science.gov (United States)

Sumpter, Colin; McGill, Elizabeth; Dickie, Esther; Champo, Enes; Romeri, Ester; Egan, Matt

2016-05-26

Reducing the Strength is an increasingly popular intervention in which local authorities ask retailers to stop selling 'super-strength' beers and ciders. The intervention cannot affect alcohol availability, nor consumption, unless retailers participate. In this paper, we ask whether and why retailers choose or refuse to self-impose restrictions on alcohol sales in this way. Mixed method assessment of retailers' participation in Reducing the Strength in two London (UK) local authorities. Compliance rates and the cheapest available unit of alcohol at each store were assessed. Qualitative interviews with retailer managers and staff (n = 39) explored attitudes towards the intervention and perceptions of its impacts. Shops selling super-strength across both areas fell from 78 to 25 (18 % of all off-licences). The median price of the cheapest unit of alcohol available across all retailers increased from £0.29 to £0.33 and in shops that participated in Reducing the Strength it rose from £0.33 to £0.43. The project received a mixed response from retailers. Retailers said they participated to deter disruptive customers, reduce neighbourhood disruptions and to maintain a good relationship with the local authority. Reducing the Strength participants and non-participants expressed concern about its perceived financial impact due to customers shopping elsewhere for super-strength. Some felt that customers' ability to circumvent the intervention would limit its effectiveness and that a larger scale compulsory approach would be more effective. Reducing the Strength can achieve high rates of voluntary compliance, reduce availability of super-strength and raise the price of the cheapest available unit of alcohol in participating shops. Questions remain over the extent to which voluntary interventions of this type can achieve wider social or health goals if non-participating shops attract customers from those who participate.

On the Formal Integrability Problem for Planar Differential Systems

Directory of Open Access Journals (Sweden)

Antonio Algaba

2013-01-01

Full Text Available We study the analytic integrability problem through the formal integrability problem and we show its connection, in some cases, with the existence of invariant analytic (sometimes algebraic curves. From the results obtained, we consider some families of analytic differential systems in ℂ2, and imposing the formal integrability we find resonant centers obviating the computation of some necessary conditions.

Schwartz distributions in the Lagrange variational problem

International Nuclear Information System (INIS)

Anton, H.; Bahar, L.Y.

1978-01-01

Schwartz distributions are used to eliminate the necessity of imposing a priori conditions on the class of admissible functions in the Lagrange fixed end-point variational problem. This makes it possible to defer the imposition of conditions on the extremals until such conditions become apparent from physical considerations

Elastic stability and the limit of strength

International Nuclear Information System (INIS)

Morris Jr., J.W.; Krenn, C.R.; Roundy, D.; Cohen, Marvin L.

2002-01-01

The upper limit of strength (the ''theoretical strength'') has been an active subject of research and speculation for the better part of a century. The subject has recently become important, for two reasons. First, given recent advances in ab initio techniques and computing machines, the limits of strength can be calculated with considerable accuracy, making this one of the very few problems in mechanical behavior that can actually be solved. Second, given recent advances in materials engineering, the limits of strength are being approached in some systems, such as hardened or defect-free films, and their relevance is becoming recognized in others. The present paper discusses some interesting results from recent research on the limits of strength, with an intermixture of speculations based on those results. Topics include the inherent nature of {100} cleavage and ''pencil slip'' in bcc metals, the inherent ductility of fcc metals, the anomalous properties of Al, and the possibility of measuring ideal strength with nanoindentation

Tributes imposed on tourists as a new-old source of local governments income

Directory of Open Access Journals (Sweden)

Marcin BURZEC

2014-12-01

Full Text Available The growth in a number of tourists and, consequently, a larger income obtained from tourism by the state led to the situation when the previously marginalized tributes imposed on tourists by local governments have assumed greater significance. Additional revenues to local units’ budgets, gained from the above-mentioned tributes, are often allotted for better infrastructure and tourist promotion, thereby contributing to the increased tourist competitiveness. The present paper discusses the construction of levies imposed on tourists by local governments in various European states. Besides, the issues of how local governments can influence the construction of the tax within the frames of the granted tax autonomy are examined. Due to the fact that in many European countries burdens imposed on tourists by local units can be called taxes, fees or other levies, the term „tribute”, as a broader one including all statutory charges, is intentionally used in the present paper.

Some problems of recent 'All Japan' strategy for nuclear power exports. Identification of its problems and a proposal for improvement based on international development strategies of the major three categories of businesses constituting nuclear power industry

International Nuclear Information System (INIS)

Tanabe, Tomoyuki

2011-01-01

In Japan, 'All Japan' strategy for nuclear power exports, which arranges engineering companies and electric utilities to sell nuclear power plants providing engineering, procurement, construction and operation abroad, with governmental support of expanded trade insurance, is strongly promoted today as a part of Japan's national growth strategy. However, 'All Japan' strategy generates some problems because the strategy does not consider difference of business strategies concerning international development of each enterprise. This report identifies problems of 'All Japan' strategy based on environmental scanning of major three categories of businesses, which are big nuclear technology companies, vendors and electric utilities constituting nuclear power industry. And this report proposes the way to improve the strategy as follows to resolve those problems. 1) It is necessary to assess the risk of the project that is to be undertaken by 'All Japan' approach carefully. 2) Governmental support for vendors is also needed because the vendors are source of strength of international development of the nuclear industry in Japan. 3) Where the cooperation among the electric utilities is necessary, imposing the risk burden on the utilities should be avoided. 4) It is necessary for government to take measures about 'Weakness' and 'Threat' that each category of business commonly faces. (author)

INVESTIGATION OF MATERIAL RESISTANCE TO PLASTIC DEFORMATION AT PROCESSING METALS BY PRESSURE WITH IMPOSING ULTRASONIC OSCILLATIONS

Directory of Open Access Journals (Sweden)

V. V. Klubovich

2007-01-01

Full Text Available The paper contains substantiation for application of experimental technique in order to investigate material resistance to plastic deformation at processing metals by pressure with imposing ultrasonic oscillations while proceeding from laws of similarity. It is shown that at modeling any metal processing by pressure with imposing ultrasonic oscillations it is possible to consider that actual elastic and plastic metal properties remain constant during processing under ultrasound action. The second aspect that requires a special attention at modeling is pulse or vibration-shock deformation at processing metals by pressure with imposing ultrasonic oscillations.

Review of heat transfer problems associated with magnetically-confined fusion reactor concepts

International Nuclear Information System (INIS)

Hoffman, M.A.; Werner, R.W.; Carlson, G.A.; Cornish, D.N.

1976-01-01

Conceptual design studies of possible fusion reactor configurations have revealed a host of interesting and sometimes extremely difficult heat transfer problems. The general requirements imposed on the coolant system for heat removal of the thermonuclear power from the reactor are discussed. In particular, the constraints imposed by the fusion plasma, neutronics, structure and magnetic field environment are described with emphasis on those aspects which are unusual or unique to fusion reactors. Then the particular heat transfer characteristics of various possible coolants including lithium, flibe, boiling alkali metals, and helium are discussed in the context of these general fusion reactor requirements. Some specific areas where further experimental and/or theoretical work is necessary are listed for each coolant along with references to the pertinent research already accomplished. Specialized heat transfer problems of the plasma injection and removal systems are also described. Finally, the challenging heat transfer problems associated with the superconducting magnets are reviewed, and once again some of the key unsolved heat transfer problems are enumerated

Identification during imposed change: the roles of personal values, type of change, and anxiety.

Science.gov (United States)

Sverdlik, Noga; Oreg, Shaul

2015-06-01

Using a person-situation perspective, we explain what happens to individuals' identification with a collective in the context of a change. We propose that given the anxiety that often emerges during change, individuals' personal values (conservation and openness to change) interact with type of change (imposed vs. voluntary) in predicting identification following change. In a pilot, longitudinal field study (N = 61, 67% female) of an imposed university campus relocation, we measured employees' values and identification with the university before and several months after the relocation. In two lab experiments (Study 1: N = 104, 91.3% female; Study 2: N = 113, 75.2% female), we manipulated a change to be either imposed or voluntary and compared the relationships between values and identification across types of change. In Study 2, we also measured anxiety from the change. When change was imposed (all three studies), but not when voluntary (Studies 1 and 2), individuals' conservation was positively, and openness negatively, related to individuals' post-change identification. The effects emerged only for individuals who experienced change-related anxiety (Study 2). Our findings demonstrate that individuals' identification with a changing collective depends on the amount of anxiety change elicits and on the particular combination of their values and type of change. © 2014 Wiley Periodicals, Inc.

Effect of surface treatment on flexural strength of zirconia bars

NARCIS (Netherlands)

Aboushelib, M.N.; Wang, H.

2010-01-01

Statement of problem Clinical and laboratory processing techniques induce damage to the surface of zirconia frameworks, which significantly lessens their strength. Purpose The purpose of this study was to investigate the influence of 3 surface restoration methods on the flexural strength of zirconia

Reducing the Strength: a mixed methods evaluation of alcohol retailers’ willingness to voluntarily reduce the availability of low cost, high strength beers and ciders in two UK local authorities

Directory of Open Access Journals (Sweden)

Colin Sumpter

2016-05-01

Full Text Available Abstract Background Reducing the Strength is an increasingly popular intervention in which local authorities ask retailers to stop selling ‘super-strength’ beers and ciders. The intervention cannot affect alcohol availability, nor consumption, unless retailers participate. In this paper, we ask whether and why retailers choose or refuse to self-impose restrictions on alcohol sales in this way. Methods Mixed method assessment of retailers’ participation in Reducing the Strength in two London (UK local authorities. Compliance rates and the cheapest available unit of alcohol at each store were assessed. Qualitative interviews with retailer managers and staff (n = 39 explored attitudes towards the intervention and perceptions of its impacts. Results Shops selling super-strength across both areas fell from 78 to 25 (18 % of all off-licences. The median price of the cheapest unit of alcohol available across all retailers increased from £0.29 to £0.33 and in shops that participated in Reducing the Strength it rose from £0.33 to £0.43. The project received a mixed response from retailers. Retailers said they participated to deter disruptive customers, reduce neighbourhood disruptions and to maintain a good relationship with the local authority. Reducing the Strength participants and non-participants expressed concern about its perceived financial impact due to customers shopping elsewhere for super-strength. Some felt that customers’ ability to circumvent the intervention would limit its effectiveness and that a larger scale compulsory approach would be more effective. Conclusions Reducing the Strength can achieve high rates of voluntary compliance, reduce availability of super-strength and raise the price of the cheapest available unit of alcohol in participating shops. Questions remain over the extent to which voluntary interventions of this type can achieve wider social or health goals if non-participating shops attract customers

Improving the Strength of ZTA Foams with Different Strategies: Immersion Infiltration and Recoating

Directory of Open Access Journals (Sweden)

Xiaodong Chen

2017-07-01

Full Text Available The combination of high strength and toughness, excellent wear resistance and moderate density makes zirconia-toughened alumina (ZTA a favorable ceramic, and the foam version of it may also exhibit excellent properties. Here, ZTA foams were prepared by the polymer sponge replication method. We developed an immersion infiltration approach with simple equipment and operations to fill the hollow struts in as-prepared ZTA foams, and also adopted a multiple recoating method (up to four cycles to strengthen them. The solid load of the slurry imposed a significant influence on the properties of the ZTA foams. Immersion infiltration gave ZTA foams an improvement of 1.5 MPa in compressive strength to 2.6 MPa at 87% porosity, only resulting in a moderate reduction of porosity (2–3%. The Weibull modulus of the infiltrated foams was in the range of 6–9. The recoating method generated an increase in compression strength to 3.3–11.4 MPa with the reduced porosity of 58–83%. The recoating cycle dependency of porosity and compression strength is nearly linear. The immersion infiltration strategy is comparable to the industrially-established recoating method and can be applied to other reticulated porous ceramics (RPCs.

The added value of measuring thumb and finger strength when comparing strength measurements in hypoplastic thumb patients.

Science.gov (United States)

Molenaar, H M Ties; Selles, Ruud W; de Kraker, Marjolein; Stam, Henk J; Hovius, Steven E R

2013-10-01

When interventions to the hand are aimed at improving function of specific fingers or the thumb, the RIHM (Rotterdam Intrinsic Hand Myometer) is a validated tool and offers more detailed information to assess strength of the involved joints besides grip and pinch measurements. In this study, strength was measured in 65 thumbs in 40 patients diagnosed with thumb hypoplasia. These 65 thumbs were classified according to Blauth. Longitudinal radial deficiencies were also classified. The strength measurements comprised of grip, tip, tripod and key pinch. Furthermore palmar abduction and opposition of the thumb as well as abduction of the index and little finger were measured with the RIHM. For all longitudinal radial deficiency patients, grip and pinch strength as well as palmar abduction and thumb opposition were significantly lower than reference values (P<0.001). However, strength in the index finger abduction and the little finger abduction was maintained or decreased to a lesser extent according to the degree of longitudinal radial deficiency. All strength values decreased with increasing Blauth-type. Blauth-type II hands (n=15) with flexor digitorum superficialis 4 opposition transfer including stabilization of the metacarpophalangeal joint showed a trend toward a higher opposition strength without reaching statistical significance (P=0.094),however compared to non-operated Blauth-type II hands (n=6) they showed a lower grip strength (P=0.019). The RIHM is comparable in accuracy to other strength dynamometers. Using the RIHM, we were able to illustrate strength patterns on finger-specific level, showing added value when evaluating outcome in patients with hand related problems. © 2013.

Topological strength of magnetic skyrmions

Energy Technology Data Exchange (ETDEWEB)

Bazeia, D.; Ramos, J.G.G.S.; Rodrigues, E.I.B.

2017-02-01

This work deals with magnetic structures that attain integer and half-integer skyrmion numbers. We model and solve the problem analytically, and show how the solutions appear in materials that engender distinct, very specific physical properties, and use them to describe their topological features. In particular, we found a way to model skyrmion with a large transition region correlated with the presence of a two-peak skyrmion number density. Moreover, we run into the issue concerning the topological strength of a vortex-like structure and suggest an experimental realization, important to decide how to modify and measure the topological strength of the magnetic structure.

36 CFR 1280.34 - What are the types of corrective action NARA imposes for prohibited behavior?

Science.gov (United States)

2010-07-01

... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false What are the types of corrective action NARA imposes for prohibited behavior? 1280.34 Section 1280.34 Parks, Forests, and Public... corrective action NARA imposes for prohibited behavior? (a) Individuals who violate the provisions of this...

Cracking in reinforced concrete structures due to imposed deformations

Energy Technology Data Exchange (ETDEWEB)

Nagy, A.

1997-04-01

This thesis is concerned with modeling of the cracking process in reinforced concrete due to imposed deformations. Cracking is investigated both at early ages, during hydration, and at mature age when the final properties of the concrete are reached. One of the most important material characteristics of the concrete at early ages, the Young`s modulus is determined by means of a dynamic method called the resonance frequency method. 40 refs

Imposing limits on autonomous systems.

Science.gov (United States)

Hancock, P A

2017-02-01

Our present era is witnessing the genesis of a sea-change in the way that advanced technologies operate. Amongst this burgeoning wave of untrammelled automation there is now beginning to arise a cadre of ever-more independent, autonomous systems. The degree of interaction between these latter systems with any form of human controller is becoming progressively more diminished and remote; and this perhaps necessarily so. Here, I advocate for human-centred and human favouring constraints to be designed, programmed, promulgated and imposed upon these nascent forms of independent entity. I am not sanguine about the collective response of modern society to this call. Nevertheless, the warning must be voiced and the issue debated, especially among those who most look to mediate between people and technology. Practitioner Summary: Practitioners are witnessing the penetration of progressively more independent technical orthotics into virtually all systems' operations. This work enjoins them to advocate for sentient, rational and mindful human-centred approaches towards such innovations. Practitioners need to place user-centred concerns above either the technical or the financial imperatives which motivate this line of progress.

28 CFR 522.13 - Relationship between existing civil contempt commitment orders and new criminal sentences imposed...

Science.gov (United States)

2010-07-01

... contempt commitment orders and new criminal sentences imposed under the U.S. or D.C. Code. 522.13 Section..., CLASSIFICATION, AND TRANSFER ADMISSION TO INSTITUTION Civil Contempt of Court Commitments § 522.13 Relationship between existing civil contempt commitment orders and new criminal sentences imposed under the U.S. or D.C...

Pure culture response of ectomycorrhizal fungi to imposed water stress

Science.gov (United States)

Mark D. Coleman; Caroline S. Bledsoe; William Lopushinsky

1989-01-01

The ability of ectomycorrhizal fungal isolates to tolerate imposed water stress in pure culture was examined in 55 isolates of 18 species. Water potential treatments, adjusted with polyethylene glycol, were applied to Petri dish units. These units allowed colony diameter measurements of fungi grown on liquid media. Delayed growth initiation and inhibition of growth...

Effective Teaching of Economics: A Constrained Optimization Problem?

Science.gov (United States)

Hultberg, Patrik T.; Calonge, David Santandreu

2017-01-01

One of the fundamental tenets of economics is that decisions are often the result of optimization problems subject to resource constraints. Consumers optimize utility, subject to constraints imposed by prices and income. As economics faculty, instructors attempt to maximize student learning while being constrained by their own and students'…

Self-imposed length limits in recreational fisheries

Science.gov (United States)

Chizinski, Christopher J.; Martin, Dustin R.; Hurley, Keith L.; Pope, Kevin L.

2014-01-01

A primary motivating factor on the decision to harvest a fish among consumptive-orientated anglers is the size of the fish. There is likely a cost-benefit trade-off for harvest of individual fish that is size and species dependent, which should produce a logistic-type response of fish fate (release or harvest) as a function of fish size and species. We define the self-imposed length limit as the length at which a captured fish had a 50% probability of being harvested, which was selected because it marks the length of the fish where the probability of harvest becomes greater than the probability of release. We assessed the influences of fish size, catch per unit effort, size distribution of caught fish, and creel limit on the self-imposed length limits for bluegill Lepomis macrochirus, channel catfish Ictalurus punctatus, black crappie Pomoxis nigromaculatus and white crappie Pomoxis annularis combined, white bass Morone chrysops, and yellow perch Perca flavescens at six lakes in Nebraska, USA. As we predicted, the probability of harvest increased with increasing size for all species harvested, which supported the concept of a size-dependent trade-off in costs and benefits of harvesting individual fish. It was also clear that probability of harvest was not simply defined by fish length, but rather was likely influenced to various degrees by interactions between species, catch rate, size distribution, creel-limit regulation and fish size. A greater understanding of harvest decisions within the context of perceived likelihood that a creel limit will be realized by a given angler party, which is a function of fish availability, harvest regulation and angler skill and orientation, is needed to predict the influence that anglers have on fish communities and to allow managers to sustainable manage exploited fish populations in recreational fisheries.

25 CFR 170.916 - May tribes impose taxes or fees on those performing IRR Program services?

Science.gov (United States)

2010-04-01

... Indian Preference § 170.916 May tribes impose taxes or fees on those performing IRR Program services? Yes... 25 Indians 1 2010-04-01 2010-04-01 false May tribes impose taxes or fees on those performing IRR Program services? 170.916 Section 170.916 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT OF THE INTERIOR...

Self-interest without selfishness: the hedonic benefit of imposed self-interest.

Science.gov (United States)

Berman, Jonathan Z; Small, Deborah A

2012-10-01

Despite commonsense appeal, the link between self-interest and happiness remains elusive. One reason why individuals may not feel satisfied with self-interest is that they feel uneasy about sacrificing the needs of others for their own gain. We propose that externally imposing self-interest allows individuals to enjoy self-benefiting outcomes that are untainted by self-reproach for failing to help others. Study 1 demonstrated that an imposed self-interested option (a reward) leads to greater happiness than does choosing between a self-interested option and a prosocial option (a charity donation). Study 2 demonstrated that this effect is not driven by choice in general; rather, it is the specific trade-off between benefiting the self and benefiting others that inhibits happiness gained from self-interest. We theorize that the agency inherent in choice reduces the hedonic value of self-interest. Results of Study 3 find support for this mechanism.

Nonlinear modeling, strength-based design, and testing of flexible piezoelectric energy harvesters under large dynamic loads for rotorcraft applications

Science.gov (United States)

Leadenham, Stephen; Erturk, Alper

2014-04-01

There has been growing interest in enabling wireless health and usage monitoring for rotorcraft applications, such as helicopter rotor systems. Large dynamic loads and acceleration fluctuations available in these environments make the implementation of vibration-based piezoelectric energy harvesters a very promising choice. However, such extreme loads transmitted to the harvester can also be detrimental to piezoelectric laminates and overall system reliability. Particularly flexible resonant cantilever configurations tuned to match the dominant excitation frequency can be subject to very large deformations and failure of brittle piezoelectric laminates due to excessive bending stresses at the root of the harvester. Design of resonant piezoelectric energy harvesters for use in these environments require nonlinear electroelastic dynamic modeling and strength-based analysis to maximize the power output while ensuring that the harvester is still functional. This paper presents a mathematical framework to design and analyze the dynamics of nonlinear flexible piezoelectric energy harvesters under large base acceleration levels. A strength-based limit is imposed to design the piezoelectric energy harvester with a proof mass while accounting for material, geometric, and dissipative nonlinearities, with a focus on two demonstrative case studies having the same linear fundamental resonance frequency but different overhang length and proof mass values. Experiments are conducted at different excitation levels for validation of the nonlinear design approach proposed in this work. The case studies in this work reveal that harvesters exhibiting similar behavior and power generation performance at low excitation levels (e.g. less than 0.1g) can have totally different strength-imposed performance limitations under high excitations (e.g. above 1g). Nonlinear modeling and strength-based design is necessary for such excitation levels especially when using resonant cantilevers with no

Influence of scandium on the microstructure and strength properties of the welded joint at the laser welding of aluminum-lithium alloys

Science.gov (United States)

Malikov, A. G.; Golyshev, A. A.; Ivanova, M. Yu.

2017-10-01

Today, aeronautical equipment manufacture involves up-to-date high-strength aluminum alloys of decreased density resulting from lithium admixture. Various technologies of fusible welding of these alloys are being developed. Serious demands are imposed to the welded joints of aluminum alloys in respect to their strength characteristics. The paper presents experimental investigations of the optimization of the laser welding of aluminum alloys with the scandium-modified welded joint. The effect of scandium on the micro-and macro-structure has been studied as well as the strength characteristics of the welded joint. It has been found that scandium under in the laser welding process increases the welded joint elasticity for the system Al-Mg-Li, aluminum alloy 1420 by 20 %, and almost doubles the same for the system Al-Cu-Li, aluminum alloy 1441.

24 CFR 266.120 - Actions for which sanctions may be imposed.

Science.gov (United States)

2010-04-01

... AUTHORITIES HOUSING FINANCE AGENCY RISK-SHARING PROGRAM FOR INSURED AFFORDABLE MULTIFAMILY PROJECT LOANS Housing Finance Agency Requirements § 266.120 Actions for which sanctions may be imposed. Results of... provisions with respect to individual projects; (12) Maintain a default ratio acceptable to HUD relative to...

Is imposing risk awareness cultural imperialism?

Science.gov (United States)

Førde, O H

1998-11-01

Epidemiology is the main supplier of "bases of action" for preventive medicine and health promotion. Epidemiology and epidemiologists therefore have a responsibility not only for the quality and soundness of the risk estimates they deliver and for the way they are interpreted and used, but also for their consequences. In the industrialised world, the value of, and fascination with health is greater than ever, and the revelation from epidemiological research of new hazards and risks, conveyed to the public by the media, has become almost an every-day phenomenon. This "risk epidemic" in the modern media is paralleled in professional medical journals. It is in general endorsed by health promoters as a necessary foundation for increased health awareness and a desirable impetus for people to take responsibility for their own health through behavioural changes. Epidemiologists and health promoters, however, have in general not taken the possible side effects of increased risk awareness seriously enough. By increasing anxiety regarding disease, accidents and other adverse events, the risk epidemic enhances both health care dependence and health care consumption. More profoundly, and perhaps even more seriously, it changes the way people think about health, disease and death--and ultimately and at least potentially, their perspective on life more generally. The message from the odds ratios from epidemiological research advocates a rationalistic, individualistic, prospective life perspective where maximising control and minimising uncertainty is seen as a superior goal. The inconsistency between applying an expanded health concept, comprising elements of coping, self-realisation and psycho-physical functioning, and imposing intolerance to risk and uncertainty, is regularly overlooked. Acceptance and tolerance of risk and uncertainty, which are inherent elements of human life, is a prerequisite for coping and self-realisation. A further shift away from traditional working

Solving eigenvalue problems on curved surfaces using the Closest Point Method

KAUST Repository

Macdonald, Colin B.; Brandman, Jeremy; Ruuth, Steven J.

2011-01-01

defined in the embedding space and the original surface problem. For open surfaces, we present a simple way to impose Dirichlet and Neumann boundary conditions while maintaining second-order accuracy. Convergence studies and a series of examples

Mitochondrial reactive oxygen species regulate the strength of inhibitory GABA-mediated synaptic transmission

Science.gov (United States)

Accardi, Michael V.; Daniels, Bryan A.; Brown, Patricia M. G. E.; Fritschy, Jean-Marc; Tyagarajan, Shiva K.; Bowie, Derek

2014-01-01

Neuronal communication imposes a heavy metabolic burden in maintaining ionic gradients essential for action potential firing and synaptic signalling. Although cellular metabolism is known to regulate excitatory neurotransmission, it is still unclear whether the brain’s energy supply affects inhibitory signalling. Here we show that mitochondrial-derived reactive oxygen species (mROS) regulate the strength of postsynaptic GABAA receptors at inhibitory synapses of cerebellar stellate cells. Inhibition is strengthened through a mechanism that selectively recruits α3-containing GABAA receptors into synapses with no discernible effect on resident α1-containing receptors. Since mROS promotes the emergence of postsynaptic events with unique kinetic properties, we conclude that newly recruited α3-containing GABAA receptors are activated by neurotransmitter released onto discrete postsynaptic sites. Although traditionally associated with oxidative stress in neurodegenerative disease, our data identify mROS as a putative homeostatic signalling molecule coupling cellular metabolism to the strength of inhibitory transmission.

Agent assisted interactive algorithm for computationally demanding multiobjective optimization problems

OpenAIRE

Ojalehto, Vesa; Podkopaev, Dmitry; Miettinen, Kaisa

2015-01-01

We generalize the applicability of interactive methods for solving computationally demanding, that is, time-consuming, multiobjective optimization problems. For this purpose we propose a new agent assisted interactive algorithm. It employs a computationally inexpensive surrogate problem and four different agents that intelligently update the surrogate based on the preferences specified by a decision maker. In this way, we decrease the waiting times imposed on the decision maker du...

Morozov-type discrepancy principle for nonlinear ill-posed problems ...

Indian Academy of Sciences (India)

For proving the existence of a regularization parameter under a Morozov-type discrepancy principle for Tikhonov regularization of nonlinear ill-posed problems, it is required to impose additional nonlinearity assumptions on the forward operator. Lipschitz continuity of the Freéchet derivative and requirement of the Lipschitz ...

Morozov-type discrepancy principle for nonlinear ill-posed problems ...

Indian Academy of Sciences (India)

2016-08-26

Aug 26, 2016 ... For proving the existence of a regularization parameter under a Morozov-type discrepancy principle for Tikhonov regularization of nonlinear ill-posed problems, it is required to impose additional nonlinearity assumptions on the forward operator. Lipschitz continuity of the Freéchet derivative and requirement ...

Geodesy problems in nuclear power plant construction

International Nuclear Information System (INIS)

Eory, K.

1981-01-01

The special geodetic problems encountered during the construction of the Paks nuclear power plants are treated. The main building with its hermetically connected components including the reactor, the steam generators, the circulation pumps etc. impose special requirements on the control net of datum points. The geodesy tasks solved during the construction of the main building are presented in details. (R.P.)

Gravitational field strength and generalized Komar-integral

International Nuclear Information System (INIS)

Simon, W.

1984-01-01

We define a 'gravitational field strength' in theories of the Einstein-Cartan type admitting a Killing-vector. This field strength is a second rank, antisymmetric, divergence-free tensor, whose ('Komar-') integral over a closed 2-surface gives a physically meaningful quantity. We find conditions on the Lagrange-density of the theory which ensure the existence of such a tensor, and show that they are satisfied for N = 2-supergravity and for a special case of the bosonic sector of N = 4-supergravity. We discuss a possible application of the generalized Komar-integral in the theory of stationary black holes. We also consider the Kaluza-Klein-approach to the 'field-strength-problem', which turns out to be particularly rewarding in the application to black holes. (Author)

Strength Calculation of Locally Loaded Orthotropic Shells

Directory of Open Access Journals (Sweden)

Yu. I. Vinogradov

2015-01-01

Full Text Available The article studies laminated orthotropic cylindrical, conic, spherical, and toroidal shells, which are often locally loaded in the aircraft designs over small areas of their surfaces.The aim of this work is to determine stress concentration in shells versus structure of orthotropic composite material, shell form and parameters, forms of loading areas, which borders do not coincide with lines of main curvatures of shells. For this purpose, an analytical computing algorithm to estimate strength of shells in terms of stress is developed. It enables us to have solution results of the boundary value problem with a controlled error. To solve differential equations an analytical method is used. An algorithm of the boundary value problem solution is multiplicative.The main results of researches are graphs of stress concentration in the orthotropic shells versus their parameters and areas of loading lineated by circles and ellipses.Among the other works aimed at determination of stress concentration in shells, the place of this one is defined by the analytical solution of applied problems for strength estimation in terms of shell stresses of classical forms.The developed effective analytical algorithm to solve the boundary value problem and received results are useful in research and development.

Arthropod Borne Diseases in Imposed War during 1980-88

Directory of Open Access Journals (Sweden)

M Khoobdel

2008-06-01

Full Text Available Background: Personnel of military forces have close contact with natural habitat and usually encounter with bite of arthropods and prone to be infected with arthropod borne diseases. The imposed war against Iran was one of the most important and the longest war in the Middle East and even in the world and military people faced various diseases. The aim of this study was to review prevalence of arthropod borne diseases and to collect relevant information and valuable experiences during the imposed war.Methods: The present survey is a historical research and cross-sectional study, focused on arthropod fauna, situation of different arthropod borne diseases and also the ways which military personnel used to protect themselves against them. The information was adopted from valid military health files and also interviewing people who participated in the war.Results: Scabies, cutaneous leishmaniasis, sandfly fever and pediculosis were more prevalent among other arthropod -borne diseases in Iran-Iraq war. Measures to control arthropods and diseases at wartime mainly included: scheduled spraying of pesticides, leishmanization and treatment of patients.Conclusion: Although measures used during the war to control arthropods were proper, however, due to needs and importance of military forces to new equipment and technologies, it is recommended to use deltamethrin-impreg­nated bed net, permethrin treated military uniforms and various insect repellents in future.

Arthropod Borne Diseases in Imposed War during 1980-88

Directory of Open Access Journals (Sweden)

M Khoobdel

2008-08-01

Full Text Available Background: Personnel of military forces have close contact with natural habitat and usually encounter with bite of arthropods and prone to be infected with arthropod borne diseases. The imposed war against Iran was one of the most important and the longest war in the Middle East and even in the world and military people faced various diseases. The aim of this study was to review prevalence of arthropod borne diseases and to collect relevant information and valuable experiences during the imposed war. Methods: The present survey is a historical research and cross-sectional study, focused on arthropod fauna, situation of different arthropod borne diseases and also the ways which military personnel used to protect themselves against them. The information was adopted from valid military health files and also interviewing people who participated in the war. Results: Scabies, cutaneous leishmaniasis, sandfly fever and pediculosis were more prevalent among other arthropod -borne diseases in Iran-Iraq war. Measures to control arthropods and diseases at wartime mainly included: scheduled spraying of pesticides, leishmanization and treatment of patients. Conclusion: Although measures used during the war to control arthropods were proper, however, due to needs and importance of military forces to new equipment and technologies, it is recommended to use deltamethrin-impreg­nated bed net, permethrin treated military uniforms and various insect repellents in future.

Problems as Opportunity: Meeting Growth Needs

Science.gov (United States)

Brokenleg, Martin; Long, Nicholas J.

2013-01-01

Children have innate brain programs for building personal strengths and social bonds, but conflict and trauma can jeopardize their growth potentials. Life Space Crisis Intervention (LSCI) provides specific tools to turn problems into potentials. Life Space Crisis Intervention provides advanced therapeutic strategies for building strengths in…

Multistep triaxial strength tests: investigating strength parameters and pore pressure effects on Opalinus Clay

International Nuclear Information System (INIS)

Graesle, W.

2010-01-01

Document available in extended abstract form only. The impact of natural variability between rock samples from a single formation is a common problem for the characterisation of THM properties of rocks. Data variation arising from heterogeneity between samples often obscures details of material behaviour. Besides efforts to reduce this statistical noise by careful selection of samples, there are essentially two approaches to overcome this problem: - To generate very large data sets for better statistics. - To avoid the impact of natural variability by yielding an extensive data set from a single sample. The multistep strength test follows the latter approach to characterise the mechanical behaviour of Opalinus Clay from Mont Terri and the possible impact of pore pressure effects. The concept of the multistep strength test comprises three test sections, each focused on the investigation of one mechanical characteristic of Opalinus Clay. Any section is composed of a series of strain controlled load cycles at various levels of confining pressure. 1) The linear elastic limit, i.e. the onset of nonlinearity in the stress-strain-relationship σ dev (ε 1 ) during strain-controlled triaxial loading, is determined in section 1. It defines a lower limit for the onset of damage. Avoiding sample damage is essential during this test section to ensure that all measurements reflect the behaviour of undisturbed material. Therefore, a rather strict and well detectable criterion for the onset of nonlinearity is required to enable a timely termination of any load phase. 2) Section 2 is focused on shear strength. Any load cycle is stopped as soon as peak stress is detected. As progressive damage of the sample is unavoidable during this process, it must be expected that only very few measured peak stresses approximately represent properties of the undamaged material. 3) Test section 3 is a conventional test of residual strength. Tests are carried out on cylindrical samples (100 mm

Family Dynamics and Personal Strengths among Dementia Caregivers in Argentina

Science.gov (United States)

Elnasseh, Aaliah G.; Trujillo, Michael A.; Peralta, Silvina Victoria; Stolfi, Miriam E.; Morelli, Eliana; Perrin, Paul B.

2016-01-01

This study examined whether healthier family dynamics were associated with higher personal strengths of resilience, sense of coherence, and optimism among dementia caregivers in Argentina. Caregivers are usually required to assist individuals with dementia, and family members have typically fulfilled that role. Personal strengths such as resilience, sense of coherence, and optimism have been shown to protect caregivers from some of the negative experiences of providing care, though the family-related variables associated with these personal strengths are largely unknown. Hierarchical multiple regressions investigated the extent to which family dynamics variables are associated with each of the caregiver personal strengths after controlling for demographic and caregiver characteristics. A sample of 105 caregivers from Argentina completed a set of questionnaires during a neurologist visit. Family dynamics explained 32% of the variance in resilience and 39% of the variance in sense of coherence. Greater family empathy and decreased family problems were uniquely associated with higher resilience. Greater communication and decreased family problems were uniquely associated with higher sense of coherence. Optimism was not found to be significantly associated with family dynamics. These results suggest that caregiver intervention research focused on the family may help improve caregiver personal strengths in Argentina and other Latin American countries. PMID:27413574

Family Dynamics and Personal Strengths among Dementia Caregivers in Argentina

Directory of Open Access Journals (Sweden)

Aaliah G. Elnasseh

2016-01-01

Full Text Available This study examined whether healthier family dynamics were associated with higher personal strengths of resilience, sense of coherence, and optimism among dementia caregivers in Argentina. Caregivers are usually required to assist individuals with dementia, and family members have typically fulfilled that role. Personal strengths such as resilience, sense of coherence, and optimism have been shown to protect caregivers from some of the negative experiences of providing care, though the family-related variables associated with these personal strengths are largely unknown. Hierarchical multiple regressions investigated the extent to which family dynamics variables are associated with each of the caregiver personal strengths after controlling for demographic and caregiver characteristics. A sample of 105 caregivers from Argentina completed a set of questionnaires during a neurologist visit. Family dynamics explained 32% of the variance in resilience and 39% of the variance in sense of coherence. Greater family empathy and decreased family problems were uniquely associated with higher resilience. Greater communication and decreased family problems were uniquely associated with higher sense of coherence. Optimism was not found to be significantly associated with family dynamics. These results suggest that caregiver intervention research focused on the family may help improve caregiver personal strengths in Argentina and other Latin American countries.

Compressive strength improvement for recycled concrete aggregate

Directory of Open Access Journals (Sweden)

Mohammed Dhiyaa

2018-01-01

Full Text Available Increasing amount of construction waste and, concrete remnants, in particular pose a serious problem. Concrete waste exist in large amounts, do not decay and need long time for disintegration. Therefore, in this work old demolished concrete is crashed and recycled to produce recycled concrete aggregate which can be reused in new concrete production. The effect of using recycled aggregate on concrete compressive strength has been experimentally investigated; silica fume admixture also is used to improve recycled concrete aggregate compressive strength. The main parameters in this study are recycled aggregate and silica fume admixture. The percent of recycled aggregate ranged from (0-100 %. While the silica fume ranged from (0-10 %. The experimental results show that the average concrete compressive strength decreases from 30.85 MPa to 17.58 MPa when the recycled aggregate percentage increased from 0% to 100%. While, when silica fume is used the concrete compressive strength increase again to 29.2 MPa for samples with 100% of recycled aggregate.

A critical role of lateral hypothalamus in context-induced relapse to alcohol seeking after punishment-imposed abstinence.

Science.gov (United States)

Marchant, Nathan J; Rabei, Rana; Kaganovsky, Konstantin; Caprioli, Daniele; Bossert, Jennifer M; Bonci, Antonello; Shaham, Yavin

2014-05-28

In human alcoholics, abstinence is often self-imposed, despite alcohol availability, because of the negative consequences of excessive use. During abstinence, relapse is often triggered by exposure to contexts associated with alcohol use. We recently developed a rat model that captures some features of this human condition: exposure to the alcohol self-administration environment (context A), after punishment-imposed suppression of alcohol self-administration in a different environment (context B), provoked renewal of alcohol seeking in alcohol-preferring P rats. The mechanisms underlying context-induced renewal of alcohol seeking after punishment-imposed abstinence are unknown. Here, we studied the role of the lateral hypothalamus (LH) and its forebrain projections in this effect. We first determined the effect of context-induced renewal of alcohol seeking on Fos (a neuronal activity marker) expression in LH. We next determined the effect of LH reversible inactivation by GABAA + GABAB receptor agonists (muscimol + baclofen) on this effect. Finally, we determined neuronal activation in brain areas projecting to LH during context-induced renewal tests by measuring double labeling of the retrograde tracer cholera toxin subunit B (CTb; injected in LH) with Fos. Context-induced renewal of alcohol seeking after punishment-imposed abstinence was associated with increased Fos expression in LH. Additionally, renewal was blocked by muscimol + baclofen injections into LH. Finally, double-labeling analysis of CTb + Fos showed that context-induced renewal of alcohol seeking after punishment-imposed abstinence was associated with selective activation of accumbens shell neurons projecting to LH. The results demonstrate an important role of LH in renewal of alcohol seeking after punishment-imposed abstinence and suggest a role of accumbens shell projections to LH in this form of relapse. Copyright © 2014 the authors 0270-6474/14/347447-11$15.00/0.

Developing the laminar MHD forced convection flow of water/FMWNT carbon nanotubes in a microchannel imposed the uniform heat flux

Energy Technology Data Exchange (ETDEWEB)

Karimipour, Arash; Taghipour, Abdolmajid [Department of Mechanical Engineering, Najafabad Branch, Islamic Azad University, Najafabad (Iran, Islamic Republic of); Malvandi, Amir, E-mail: amirmalvandi@aut.ac.ir [Department of Mechanical Engineering, Neyshabur Branch, Islamic Azad University, Neyshabur (Iran, Islamic Republic of)

2016-12-01

This paper aims to investigate magnetic field and slip effects on developing laminar forced convection of nanofluids in the microchannels. A novel mixture of water and FMWNT carbon nanotubes is used as the working fluid. To do this, fluid flow and heat transfer through a microchannel is simulated by a computer code in FORTRAN language. The mixture of FMWNT carbon nanotubes suspended in water is considered as the nanofluid. Slip velocity is supposed as the hydrodynamic boundary condition while the microchannel's lower wall is insulated and the top wall is under the effect of a constant heat flux. Moreover, the flow field is subjected to a magnetic field with a constant strength. The results are presented as the velocity, temperature and Nusselt number profiles. It is observed that nanofluid composed of water and carbon nanotubes (FMWNT) can work well to increase the heat transfer rate along the microchannel walls. Furthermore, it is indicated that imposing the magnetic field is very effective at the thermally developing region. In contrast, the magnetic field effect at fully developed region is insignificant, especially at low values of Reynolds number. - Highlights: • Simulation of water/FMWNT carbon nanotubes flow in a microchannel. • The effects of magnetic field strength on nanofluid's slip velocity. • The effects of Ha, Re, ϕ and slip coefficient on averaged Nusselt number. • Magnetic field effect at developing flow region is significant.

Adolescent Drug Use and the Deterrent Effect of School-Imposed Penalties

Science.gov (United States)

Waddell, G. R.

2012-01-01

Estimates of the effect of school-imposed penalties for drug use on a student's consumption of marijuana are biased if both are determined by unobservable school or individual attributes. Reverse causality is also a potential challenge to retrieving estimates of the causal relationship, as the severity of school sanctions may simply reflect the…

Energy-weighted moments in the problems of fragmentation

International Nuclear Information System (INIS)

Kuz'min, V.A.

1986-01-01

The problem of fragmentation of simple nuclear states on the complex ones is reduced to real symmetrical matrix eigenvectors and eigenvalue problem. Based on spectral decomposition of this matrix the simple and economical from computing point of view algorithm to calculate energetically-weighted strength function moments is obtained. This permitted one to investigate the sensitivity of solving the fragmentation problem to reducing the basis of complex states. It is shown that the full width of strength function is determined only by the complex states connected directly with the simple ones

The Seated Inactivity Trial (SIT): Physical Activity and Dietary Outcomes Associated With 8 Weeks of Imposed Sedentary Time.

Science.gov (United States)

Cull, Brooke J; Haub, Mark D; Rosenkranz, Richard R; Lawler, Thomas; Rosenkranz, Sara K

2016-03-01

Sedentary time is an independent risk factor for chronic diseases and mortality. It is unknown whether active adults alter their dietary and/or physical activity behaviors in response to imposed sedentary time, possibly modifying risk. The aim of this study was to determine whether imposed sedentary time would alter typical behaviors of active adults. Sixteen physically active, young adults were randomized to the no-intervention control (CON, n = 8) group or the sedentary-intervention (SIT, n = 8) group. SIT participants attended monitored sedentary sessions (8 wk, 10 h/wk). Assessments including diet and physical activity occurred at baseline, week 4, and week 9. There were no differences (P > .05) between CON and SIT groups for step counts or time spent in sedentary, light, moderate, or vigorous physical activity when comparing a week during imposed sedentary time (week 4) to baseline and week 9. At week 4, caloric intake was not different from baseline (P > .05) in either group. Caloric intake decreased significantly (P > .05) in SIT from baseline to week 9. Active adults did not alter physical activity or dietary behaviors during the imposed sedentary intervention. However, SIT reduced caloric intake from baseline to week 9, indicating a possible compensatory response to imposed sitting in active adults.

Functional trade-off between strength and thermal capacity of dermal armor: Insights from girdled lizards.

Science.gov (United States)

Broeckhoven, Chris; du Plessis, Anton; Hui, Cang

2017-10-01

The presence of dermal armor is often unambiguously considered the result of an evolutionary predator-prey arms-race. Recent studies focusing predominantly on osteoderms - mineralized elements embedded in the dermis layer of various extant and extinct vertebrates - have instead proposed that dermal armor might exhibit additional functionalities besides protection. Multiple divergent functionalities could impose conflicting demands on a phenotype, yet, functional trade-offs in dermal armor have rarely been investigated. Here, we use high-resolution micro-computed tomography and voxel-based simulations to test for a trade-off between the strength and thermal capacity of osteoderms using two armored cordylid lizards as model organisms. We demonstrate that high vascularization, associated with improved thermal capacity might limit the strength of osteoderms. These results call for a holistic, cautionary future approach to studies investigating dermal armor, especially those aiming to inspire artificial protective materials. Copyright © 2017 Elsevier Ltd. All rights reserved.

Simultaneous estimation of strength and position of a heat source in a participating medium using DE algorithm

International Nuclear Information System (INIS)

Parwani, Ajit K.; Talukdar, Prabal; Subbarao, P.M.V.

2013-01-01

An inverse heat transfer problem is discussed to estimate simultaneously the unknown position and timewise varying strength of a heat source by utilizing differential evolution approach. A two dimensional enclosure with isothermal and black boundaries containing non-scattering, absorbing and emitting gray medium is considered. Both radiation and conduction heat transfer are included. No prior information is used for the functional form of timewise varying strength of heat source. The finite volume method is used to solve the radiative transfer equation and the energy equation. In this work, instead of measured data, some temperature data required in the solution of the inverse problem are taken from the solution of the direct problem. The effect of measurement errors on the accuracy of estimation is examined by introducing errors in the temperature data of the direct problem. The prediction of source strength and its position by the differential evolution (DE) algorithm is found to be quite reasonable. -- Highlights: •Simultaneous estimation of strength and position of a heat source. •A conducting and radiatively participating medium is considered. •Implementation of differential evolution algorithm for such kind of problems. •Profiles with discontinuities can be estimated accurately. •No limitation in the determination of source strength at the final time

Inverse problemfor an inhomogeneous elastic beam at a combined strength

Directory of Open Access Journals (Sweden)

Andreev Vladimir Igorevich

2014-01-01

Full Text Available In the article the authors describe a method of optimizing the stress state of an elastic beam, subject to the simultaneous action of the central concentrated force and bending moment. The optimization method is based on solving the inverse problem of the strength of materials, consisting in defining the law of changing in elasticity modulus with beam cross-section altitude. With this changing the stress state will be preset. Most problems of the elasticity theory of inhomogeneous bodies are solved in direct formulation, the essence of which is to determine the stress-strain state of a body at the known dependences of the material elastic characteristics from the coordinates. There are also some solutions of the inverse problems of the elasticity theory, in which the dependences of the mechanical characteristics from the coordinates, at which the stress state of a body is preset, are determined. In the paper the authors solve the problem of finding a dependence modulus of elasticity, where the stresses will be constant over the beam’s cross section. We will solve the problem of combined strength (in the case of the central stretching and bending. We will use an iterative method. As the initial solution, we take the solution for a homogeneous material. As the first approximation, we consider the stress state of a beam, when the modulus of elasticity varies linearly. According to the results, it can be stated that three approximations are sufficient in the considered problem. The obtained results allow us to use them in assessing the strength of a beam and its optimization.

Strength measurement of optical fibers by bending

Science.gov (United States)

Srubshchik, Leonid S.

1999-01-01

A two-point bending technique has been used not only to measure the breaking stress of optical fiber but also to predict its static and dynamic fatigue. The present theory of this test is based on elastica theory of rod. However, within the limits of elastica theory the tensile and shear stresses cannot be determined. In this paper we study dynamic and static problems for optical fiber in the two- point bending test on the base of geometrically exact theory in which rod can suffer flexure, extension, and shear. We obtain the governing partial differential equations taking into account the fact that the lateral motion of the fiber is restrained by the presence of flat parallel plates. We develop the computational methods for solving the initial and equilibrium free-boundary nonlinear planar problems. We derive the formulas for predicting of the tensile strength from strength in the bending and calculate one example.

Problems of comparison

International Nuclear Information System (INIS)

Horn, G.

1989-01-01

This paper reports on determination of the balance of forces embrace a much wider area than the scope of mere numerical comparisons. In Europe that there is rough parity between the conventional forces of WTO and NATO, we do not claim that both sides have the same forces. The balance of forces cannot be considered except in view of purpose and circumstances. In our case, the balance of forces in Europe can be taken to mean that neither side has enough strength to impose its will on the other by military force. Of course, this type of comparison cannot be used at the disarmament talks to take stock of armed forces and to determine the final result of reductions, or of the reduction process. Nevertheless it is very important to know that the talks will be conducted against the background and that the final result should not, in this one respect, be any different from the point of departure

Long-Term Strength of a Thick-Walled Pipe Filled with an Aggressive Medium, with Account for Damageability of the Pipe Material and Residual Strength

Science.gov (United States)

Piriev, S. A.

2018-01-01

This paper describes the study of scattered fracture of a thick-walled pipe filled with an aggressive medium, which creates uniform pressure on the inner surface of the pipe. It is assumed that the aggressive medium affects only the value of instantaneous strength. Damageability is described by an integral operator of the hereditary type. The problem is solved with allowance for residual strength of the pipe material behind the fracture front. Numerical calculation is carried out, and relationships between the fracture front coordinate and time for various concentrations of the aggressive medium and residual strength behind the fracture front are constructed.

The Strength of the Strongest Ties in Collaborative Problem Solving

Science.gov (United States)

de Montjoye, Yves-Alexandre; Stopczynski, Arkadiusz; Shmueli, Erez; Pentland, Alex; Lehmann, Sune

2014-06-01

Complex problem solving in science, engineering, and business has become a highly collaborative endeavor. Teams of scientists or engineers collaborate on projects using their social networks to gather new ideas and feedback. Here we bridge the literature on team performance and information networks by studying teams' problem solving abilities as a function of both their within-team networks and their members' extended networks. We show that, while an assigned team's performance is strongly correlated with its networks of expressive and instrumental ties, only the strongest ties in both networks have an effect on performance. Both networks of strong ties explain more of the variance than other factors, such as measured or self-evaluated technical competencies, or the personalities of the team members. In fact, the inclusion of the network of strong ties renders these factors non-significant in the statistical analysis. Our results have consequences for the organization of teams of scientists, engineers, and other knowledge workers tackling today's most complex problems.

Trace expansions for mixed boundary problems

Energy Technology Data Exchange (ETDEWEB)

Seeley, Robert T

2002-01-01

We discuss the heat trace expansion for a mixed boundary problem for the Laplace operator acting on sections of some bundle V over a manifold M of dimension d. The boundary is divided in two parts N{sub D} and N{sub N}, intersecting in a smooth submanifold {sigma}. Dirichlet conditions are imposed on N{sub D} - {sigma}, and Neumann conditions on N{sub N} - {sigma}. It turns out that it is also necessary to impose a condition along {sigma}. We then obtain an expansion of the trace of the heat operator with these boundary conditions, containing integrals of the usual terms over the interior and the two parts of the boundary, together with integrals over {sigma} of terms that are 'global' in certain operators on a semicircle. The first nonzero such term is computed; it involves the zeta function of an operator on the semicircle, and depends on the boundary condition along {sigma}. We find that no logarithmic terms occur in the expansion.

Anabolic Steroids and Strength and Power Related Athletic Events.

Science.gov (United States)

Lamb, David R.

1980-01-01

The efficacy of steroids in development of muscular strength in athletes is not proven. Their long-term use is increasingly being associated with liver disorders, including liver cancer, and other health problems. (JD)

Nondestructive test for estimating strength of concrete in structure

International Nuclear Information System (INIS)

Nozaki, Yoshitsugu; Soshiroda, Tomozo

1997-01-01

Evaluation of the quality of concrete in structures, especially strength estimation is said to be one of the most important problem and needed to establish test method especial tv for non-destructive method in situ. The paper describes the nondestructive test to estimate strength of concrete. From experimental study using full scale model wall, strength estimating equations are proposed by ultra-sonic pulse velocity, rebound hardness of Schmidt hammer and combined with two methods. From statistical study of the results of experiments, errors of estimated strength by the proposed equations are suggested. The validity of the equations are verified by investigation for existing reinforced concrete buildings aged 20 - 50 years. And it was found from the statistical study that the strength estimating equations need to be corrected in applying to tons aged concrete, and correction factor to those squat ions were suggested. Furthermore the corrected proposed equations were verified by applying to buildings investigated the other case.

Infinite-horizon optimal control problems in economics

International Nuclear Information System (INIS)

Aseev, Sergei M; Besov, Konstantin O; Kryazhimskii, Arkadii V

2012-01-01

This paper extends optimal control theory to a class of infinite-horizon problems that arise in studying models of optimal dynamic allocation of economic resources. In a typical problem of this sort the initial state is fixed, no constraints are imposed on the behaviour of the admissible trajectories at large times, and the objective functional is given by a discounted improper integral. We develop the method of finite-horizon approximations in a broad context and use it to derive complete versions of the Pontryagin maximum principle for such problems. We provide sufficient conditions for the normality of infinite-horizon optimal control problems and for the validity of the 'standard' limit transversality conditions with time going to infinity. As a meaningful example, we consider a new two-sector model of optimal economic growth subject to a random jump in prices. Bibliography: 53 titles.

13 CFR 127.700 - What penalties may be imposed under this part?

Science.gov (United States)

2010-01-01

... 13 Business Credit and Assistance 1 2010-01-01 2010-01-01 false What penalties may be imposed under this part? 127.700 Section 127.700 Business Credit and Assistance SMALL BUSINESS ADMINISTRATION WOMEN-OWNED SMALL BUSINESS FEDERAL CONTRACT ASSISTANCE PROCEDURES Penalties § 127.700 What penalties may...

Tensile strength and the mining of black holes.

Science.gov (United States)

Brown, Adam R

2013-11-22

There are a number of important thought experiments that involve raising and lowering boxes full of radiation in the vicinity of black hole horizons. This Letter looks at the limitations placed on these thought experiments by the null energy condition, which imposes a fundamental bound on the tensile-strength-to-weight ratio of the materials involved, makes it impossible to build a box near the horizon that is wider than a single wavelength of the Hawking quanta, and puts a severe constraint on the operation of "space elevators" near black holes. In particular, it is shown that proposals for mining black holes by lowering boxes near the horizon, collecting some Hawking radiation, and dragging it out to infinity cannot proceed nearly as rapidly as has previously been claimed. As a consequence of this limitation, the boxes and all the moving parts are superfluous and black holes can be destroyed equally rapidly by threading the horizon with strings.

Comparative study on the welded structure fatigue strength assessment method

Science.gov (United States)

Hu, Tao

2018-04-01

Due to the welding structure is widely applied in various industries, especially the pressure container, motorcycle, automobile, aviation, ship industry, such as large crane steel structure, so for welded structure fatigue strength evaluation is particularly important. For welded structure fatigue strength evaluation method mainly has four kinds of, the more from the use of two kinds of welded structure fatigue strength evaluation method, namely the nominal stress method and the hot spot stress evaluation method, comparing from its principle, calculation method for the process analysis and research, compare the similarities and the advantages and disadvantages, the analysis of practical engineering problems to provide the reference for every profession and trade, as well as the future welded structure fatigue strength and life evaluation method put forward outlook.

Numerical solution of the multichannel scattering problem

International Nuclear Information System (INIS)

Korobov, V.I.

1992-01-01

A numerical algorithm for solving the multichannel elastic and inelastic scattering problem is proposed. The starting point is the system of radial Schroedinger equations with linear boundary conditions imposed at some point R=R m placed somewhere in asymptotic region. It is discussed how the obtained linear equation can be splitted into a zero-order operator and its pertturbative part. It is shown that Lentini - Pereyra variable order finite-difference method appears to be very suitable for solving that kind of problems. The derived procedure is applied to dμ+t→tμ+d inelastic scattering in the framework of the adiabatic multichannel approach. 19 refs.; 1 fig.; 1 tab

Dress-Related Responses to the Columbine Shootings: Other-Imposed and Self-Designed.

Science.gov (United States)

Ogle, Jennifer Paff; Eckman, Molly

2002-01-01

An inductive content analysis approach was used to examine 155 dress-related newspaper articles following the Columbine High School shootings in 1999. Analysis revealed two dress-related responses: (1) other-imposed regulation to protect students and deter them from expressing hatred and (2) self-designed acts of resistance for grieving. (Contains…

The vehicle routing problem with edge set costs

DEFF Research Database (Denmark)

Reinhardt, Line Blander; Jepsen, Mads Kehlet; Pisinger, David

We consider an important generalization of the vehicle routing problem with time windows in which a fixed cost must be paid for accessing a set of edges. This fixed cost could reflect payment for toll roads, investment in new facilities, the need for certifications and other costly investments....... The certifications and contributions impose a cost for the company while they also give unlimited usage of a set of roads to all vehicles belonging to the company. Different versions for defining the edge sets are discussed and formulated. A MIP-formulation of the problem is presented, and a solution method based...

Increased strength of concrete subject to high loading rates

International Nuclear Information System (INIS)

Curbach, M.

1987-01-01

Within the scope of this work various problems are discussed which occur in connection with concrete under high tensile loading rates (e.g. when a plane crashes on a nuclear power plant very high loads occur which act only for a very short time). Particularly the causes for the already frequently noticed increases in strength with increasing loading rates are investigated and also the question whether this increased strength can be taken into account when dimensioning a construction. (MM) [de

Limits on the interstellar magnetic field imposed by observational constraints indicate that Voyager 1 remains in the inner heliosheath

International Nuclear Information System (INIS)

Gloeckler, G.; Fisk, L. A.

2016-01-01

The unmeasured interstellar magnetic field strength is an essential parameter for models of the heliosphere moving relative to the Local Interstellar Cloud (LIC) that surrounds it. Here we use recent measurements of the differential energy spectra of energetic neutral hydrogen (ENH) combined with Voyager 1 (V1) measurements of energetic particles to calculate the total pressure and its 1-0 limit in the inner heliosheath, the region between the termination shock at ∼90 AU and the heliopause that V1 presumably crossed at 122 AU. Balancing pressure across the heliopause, we find the magnetic pressure in the outer heliosheath at ∼ 135 AU where V1 is currently located. From this magnetic pressure we find an extraordinarily large magnetic field strength of 0.84 ± 0.08 nT compared to the 0.464 ± 0.009 nT field strength currently measured by V1. We conclude that V1 is currently not measuring the interstellar field, but rather the solar magnetic field. Voyager 1 is thus not in interstellar space but still inside a new, unanticipated, and most unusual region of heliosphere that it entered in late August 2012. We recalculate total pressures in the ordinary heliosheath (∼90 - 122 AU), in the new, co-called cold inner heliosheath (122 - 145 AU), in the outer heliosheath and in the unperturbed LIC. Pressure balance again requires that all these pressures must be equal. Constrained by the requirement of pressure equality between all regions and minimum reduced χ 2 fits to the ENH spectrum and the differential intensities of particles measured by V1 in the ordinary, co-called hot heliosheath, we find the common pressure to be (3.45 ± 0.39)x10 -12 dyne-cm -2 . The magnetic field strength in the outer heliosheath is calculated to be 0.90 ± 0.089 nT, and in the unperturbed LIC it is 0.86 ± 0.11 nT. To achieve common pressure for all regions imposes firm limits on the LIC neutral hydrogen density, n(HI) = 0.10 ± 0.02 cm -3 . Pressure balance between the LIC and the hot

An initial boundary value problem for modeling a piezoelectric dipolar body

Science.gov (United States)

Marin, Marin; Öchsner, Andreas

2018-03-01

This study deals with the first initial boundary value problem in elasticity of piezoelectric dipolar bodies. We consider the most general case of an anisotropic and inhomogeneous elastic body having a dipolar structure. For two different types of restrictions imposed on the problem data, we prove two results regarding the uniqueness of solution, by using a different but accessible method. Then, the mixed problem is transformed in a temporally evolutionary equation on a Hilbert space, conveniently constructed based on the problem data. With the help of a known result from the theory of semigroups of operators, the existence and uniqueness of the weak solution for this equation are proved.

42 CFR 423.752 - Basis for imposing intermediate sanctions and civil money penalties.

Science.gov (United States)

2010-10-01

... money penalties. 423.752 Section 423.752 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... BENEFIT Intermediate Sanctions § 423.752 Basis for imposing intermediate sanctions and civil money.... (iii) Medical social work. (iv) Administrative services. (b) Suspension of enrollment and marketing. If...

Infinite-horizon optimal control problems in economics

Energy Technology Data Exchange (ETDEWEB)

Aseev, Sergei M; Besov, Konstantin O; Kryazhimskii, Arkadii V

2012-04-30

This paper extends optimal control theory to a class of infinite-horizon problems that arise in studying models of optimal dynamic allocation of economic resources. In a typical problem of this sort the initial state is fixed, no constraints are imposed on the behaviour of the admissible trajectories at large times, and the objective functional is given by a discounted improper integral. We develop the method of finite-horizon approximations in a broad context and use it to derive complete versions of the Pontryagin maximum principle for such problems. We provide sufficient conditions for the normality of infinite-horizon optimal control problems and for the validity of the 'standard' limit transversality conditions with time going to infinity. As a meaningful example, we consider a new two-sector model of optimal economic growth subject to a random jump in prices. Bibliography: 53 titles.

Degree-strength correlation reveals anomalous trading behavior.

Science.gov (United States)

Sun, Xiao-Qian; Shen, Hua-Wei; Cheng, Xue-Qi; Wang, Zhao-Yang

2012-01-01

Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock markets. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying the anomalous traders using the transaction data of eight manipulated stocks and forty-four non-manipulated stocks during a one-year period. By analyzing the trading networks of stocks, we find that the trading networks of manipulated stocks exhibit significantly higher degree-strength correlation than the trading networks of non-manipulated stocks and the randomized trading networks. We further propose a method to detect anomalous traders of manipulated stocks based on statistical significance analysis of degree-strength correlation. Experimental results demonstrate that our method is effective at distinguishing the manipulated stocks from non-manipulated ones. Our method outperforms the traditional weight-threshold method at identifying the anomalous traders in manipulated stocks. More importantly, our method is difficult to be fooled by colluded traders.

Degree-strength correlation reveals anomalous trading behavior.

Directory of Open Access Journals (Sweden)

Xiao-Qian Sun

Full Text Available Manipulation is an important issue for both developed and emerging stock markets. Many efforts have been made to detect manipulation in stock markets. However, it is still an open problem to identify the fraudulent traders, especially when they collude with each other. In this paper, we focus on the problem of identifying the anomalous traders using the transaction data of eight manipulated stocks and forty-four non-manipulated stocks during a one-year period. By analyzing the trading networks of stocks, we find that the trading networks of manipulated stocks exhibit significantly higher degree-strength correlation than the trading networks of non-manipulated stocks and the randomized trading networks. We further propose a method to detect anomalous traders of manipulated stocks based on statistical significance analysis of degree-strength correlation. Experimental results demonstrate that our method is effective at distinguishing the manipulated stocks from non-manipulated ones. Our method outperforms the traditional weight-threshold method at identifying the anomalous traders in manipulated stocks. More importantly, our method is difficult to be fooled by colluded traders.

Deposit Shedding in Biomass-Fired Boilers: Shear Adhesion Strength Measurements

DEFF Research Database (Denmark)

Laxminarayan, Yashasvi; Jensen, Peter Arendt; Wu, Hao

2017-01-01

Ash deposition on boiler surfaces is a major problem encountered in biomass combustion. Timely removal of ash deposits is essentialfor optimal boiler operation. In order to improve the understanding of deposit shedding in boilers, this study investigates the adhesion strength of biomass ash from...... off by an electrically controlled arm, and the corresponding adhesion strength was measured. The effect of sintering temperature, sintering time, deposit composition, thermal shocks on the deposit, and steel type was investigated. The results reveal that the adhesion strength of ash deposits...... is dependent on two factors: ash melt fraction, and corrosion occurring at the deposit–tube interface. Adhesion strength increases with increasing sintering temperature, sharply increasing at the ash deformation temperature. However, sintering time, as well as the type of steel used, does not have...

17 CFR 270.6c-10 - Exemption for certain open-end management investment companies to impose deferred sales loads.

Science.gov (United States)

2010-04-01

... management investment companies to impose deferred sales loads. 270.6c-10 Section 270.6c-10 Commodity and... ACT OF 1940 § 270.6c-10 Exemption for certain open-end management investment companies to impose... purposes of this section: (1) Company means a registered open-end management investment company, other than...

Enhanced reconstruction of weighted networks from strengths and degrees

International Nuclear Information System (INIS)

Mastrandrea, Rossana; Fagiolo, Giorgio; Squartini, Tiziano; Garlaschelli, Diego

2014-01-01

Network topology plays a key role in many phenomena, from the spreading of diseases to that of financial crises. Whenever the whole structure of a network is unknown, one must resort to reconstruction methods that identify the least biased ensemble of networks consistent with the partial information available. A challenging case, frequently encountered due to privacy issues in the analysis of interbank flows and Big Data, is when there is only local (node-specific) aggregate information available. For binary networks, the relevant ensemble is one where the degree (number of links) of each node is constrained to its observed value. However, for weighted networks the problem is much more complicated. While the naïve approach prescribes to constrain the strengths (total link weights) of all nodes, recent counter-intuitive results suggest that in weighted networks the degrees are often more informative than the strengths. This implies that the reconstruction of weighted networks would be significantly enhanced by the specification of both strengths and degrees, a computationally hard and bias-prone procedure. Here we solve this problem by introducing an analytical and unbiased maximum-entropy method that works in the shortest possible time and does not require the explicit generation of reconstructed samples. We consider several real-world examples and show that, while the strengths alone give poor results, the additional knowledge of the degrees yields accurately reconstructed networks. Information-theoretic criteria rigorously confirm that the degree sequence, as soon as it is non-trivial, is irreducible to the strength sequence. Our results have strong implications for the analysis of motifs and communities and whenever the reconstructed ensemble is required as a null model to detect higher-order patterns

26 CFR 1.857-4 - Tax imposed by reason of the failure to meet certain source-of-income requirements.

Science.gov (United States)

2010-04-01

..., DEPARTMENT OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Real Estate Investment Trusts § 1.857-4 Tax imposed by reason of the failure to meet certain source-of-income requirements. Section 857... 26 Internal Revenue 9 2010-04-01 2010-04-01 false Tax imposed by reason of the failure to meet...

STRENGTH OF NANOMODIFIED HIGH-STRENGTH LIGHTWEIGHT CONCRETES

Directory of Open Access Journals (Sweden)

NOZEMTСEV Alexandr Sergeevich

2013-02-01

Full Text Available The paper presents the results of research aimed at development of nanomodified high-strength lightweight concrete for construction. The developed concretes are of low average density and high ultimate compressive strength. It is shown that to produce this type of concrete one need to use hollow glass and aluminosilicate microspheres. To increase the durability of adhesion between cement stone and fine filler the authors offer to use complex nanodimensinal modifier based on iron hydroxide sol and silica sol as a surface nanomodifier for hollow microspheres. It is hypothesized that the proposed modifier has complex effect on the activity of the cement hydration and, at the same time increases bond strength between filler and cement-mineral matrix. The compositions for energy-efficient nanomodified high-strength lightweight concrete which density is 1300…1500 kg/m³ and compressive strength is 40…65 MPa have been developed. The approaches to the design of high-strength lightweight concrete with density of less than 2000 kg/m³ are formulated. It is noted that the proposed concretes possess dense homogeneous structure and moderate mobility. Thus, they allow processing by vibration during production. The economic and practical implications for realization of high-strength lightweight concrete in industrial production have been justified.

New complex variable meshless method for advection—diffusion problems

International Nuclear Information System (INIS)

Wang Jian-Fei; Cheng Yu-Min

2013-01-01

In this paper, an improved complex variable meshless method (ICVMM) for two-dimensional advection—diffusion problems is developed based on improved complex variable moving least-square (ICVMLS) approximation. The equivalent functional of two-dimensional advection—diffusion problems is formed, the variation method is used to obtain the equation system, and the penalty method is employed to impose the essential boundary conditions. The difference method for two-point boundary value problems is used to obtain the discrete equations. Then the corresponding formulas of the ICVMM for advection—diffusion problems are presented. Two numerical examples with different node distributions are used to validate and inestigate the accuracy and efficiency of the new method in this paper. It is shown that ICVMM is very effective for advection—diffusion problems, and has a good convergent character, accuracy, and computational efficiency

On treating adolescent girls: focus on strengths and resiliency in psychotherapy.

Science.gov (United States)

Johnson, Norine G

2003-11-01

This strength-based psychotherapy with adolescent girls and their families is derived from feminist psychology, positive psychology, and strength-based interventions with teens. Research reviewed by the American Psychological Association's Presidential Task Force on Adolescent Girls formed the basis of specific interventions within this approach. Research findings that contributed are the effects on teen girls of positive parental relationships; utilizing strengths of their race, ethnicity, class, and gender; positive body images; being outspoken in relationships; problem-solving skills that foster independence; and family support for independence. The strength-based approach is illustrated by a case example of a 13-year-old European American girl with acting-out behaviors, depression, and subclinical attention-deficit/hyperactivity disorder. The case illustrates how to empower adolescent girls within therapy, when and how to include parents, how to change the focus to strengths, and how to help the parents assess and build upon their daughters' strengths. Copyright 2003 Wiley Periodicals, Inc.

Strength asymmetry of the shoulders in elite volleyball players.

Science.gov (United States)

Hadzic, Vedran; Sattler, Tine; Veselko, Matjaž; Markovic, Goran; Dervisevic, Edvin

2014-01-01

Volleyball players are reported to have shoulder strength imbalances. Previous authors have primarily investigated small samples of male players at a single skill level, without considering playing position, and with inconsistent findings. To evaluate shoulder strength asymmetry and a history of shoulder injury in a large sample of professional volleyball players of both sexes across different playing positions and skill levels. Descriptive laboratory study. A sample of 183 volleyball players (99 men, 84 women). We assessed shoulder internal-rotator and external-rotator concentric strength at 60°/s using an isokinetic dynamometer and dominant-nondominant differences in shoulder strength and strength ratios using repeated-measures analyses of variance. Peak torque was normalized for body mass and external-rotation/internal-rotation concentric strength. Internal-rotation strength was asymmetric in favor of the dominant side in both sexes, regardless of previous shoulder injury status. Male volleyball players had a lower shoulder strength ratio on the dominant side, regardless of previous shoulder injury status. However, this finding was valid only when hand dominance was taken into account. Female volleyball players playing at a higher level (ie, first versus second division) were 3.43 times more likely to have an abnormal strength ratio. Playing position was not associated with an abnormal shoulder strength ratio or strength asymmetry. In male volleyball players, the external-rotation/internal-rotation strength ratio of the dominant shoulder was lower, regardless of playing position, skill level, or a previous shoulder injury. In female players, the ratio was less only in those at a higher skill level. Although speculative, these findings generally suggest that female volleyball players could have a lower risk of developing shoulder-related problems than male volleyball players. Isokinetic shoulder testing may reveal important information about the possible risk

42 CFR 422.756 - Procedures for imposing intermediate sanctions and civil money penalties.

Science.gov (United States)

2010-10-01

... civil money penalties. 422.756 Section 422.756 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... Sanctions § 422.756 Procedures for imposing intermediate sanctions and civil money penalties. (a) Notice of... money penalties—(1) CMS notice to OIG. If CMS determines that an MA organization has failed to comply...

The effect of thermal loads on buckling strength of cylindrical shells

International Nuclear Information System (INIS)

Kawamoto, Y.; Kodama, T.; Matsuura, S.

1993-01-01

Nuclear power plant components must be designed taking account of strong seismic loads in countries with frequent earthquakes like Japan. When designing such thin-walled shell components as a main vessel of a fast breeder reactor (FBR), one should consider the possibility that buckling might occur. In Japan, a series of buckling research has been conducted under contract with the Ministry of International Trade and Industry to develop the aseismic design method for a demonstration FBR. This study has been also done as a part of them. The problem of thermal loads on buckling strength is one of the important problems in the buckling research for FBR because axial temperature gradient is produced in a main vessel and the significant thermal stress is shown. Some studies on the effect of thermal loads on buckling strength were carried out (Brochard, 1987), (Nakamura, 1987), but its effect in the actual vessel has not been evaluated quantitatively. We have already reported the effect of thermal loads on buckling strength of a pool-type reactor vessel. (Kawamoto ,1989) In this paper, we focus on a loop-type reactor vessel and investigate the effect of thermal loads accompanying with axial temperature change near the sodium level. And the reduction of buckling strength due to the thermal loads is quantitatively evaluated

Strength Pareto particle swarm optimization and hybrid EA-PSO for multi-objective optimization.

Science.gov (United States)

Elhossini, Ahmed; Areibi, Shawki; Dony, Robert

2010-01-01

This paper proposes an efficient particle swarm optimization (PSO) technique that can handle multi-objective optimization problems. It is based on the strength Pareto approach originally used in evolutionary algorithms (EA). The proposed modified particle swarm algorithm is used to build three hybrid EA-PSO algorithms to solve different multi-objective optimization problems. This algorithm and its hybrid forms are tested using seven benchmarks from the literature and the results are compared to the strength Pareto evolutionary algorithm (SPEA2) and a competitive multi-objective PSO using several metrics. The proposed algorithm shows a slower convergence, compared to the other algorithms, but requires less CPU time. Combining PSO and evolutionary algorithms leads to superior hybrid algorithms that outperform SPEA2, the competitive multi-objective PSO (MO-PSO), and the proposed strength Pareto PSO based on different metrics.

Age and sex differences in steadiness of elbow flexor muscles with imposed cognitive demand

Science.gov (United States)

Pereira, Hugo M.; Spears, Vincent C.; Schlinder-Delap, Bonnie; Yoon, Tejin; Nielson, Kristy A.; Hunter, Sandra K.

2015-01-01

Purpose These studies determined (1) age and sex-related differences in steadiness of isometric contractions when high cognitive demand was imposed across a range of forces with the elbow flexor muscles (study 1) and, (2) sex differences in steadiness among older adults when low cognitive demand was imposed (study 2). Methods 36 young adults (18–25 years; 18 women) and 30 older adults (60–82 years; 17 women) performed isometric contractions at 5%, 30% and 40% of maximum voluntary contraction (MVC). Study 1 involved a high-cognitive demand session (serial subtractions by 13 during the contraction) and a control session (no mental math). Study 2 (older adults only) involved a low-cognitive demand session (subtracting by 1s). Results Older individuals exhibited greater increases in force fluctuations (coefficient of variation of force, CV) with high cognitive demand than young adults, with the largest age difference at 5% MVC (P = 0.01). Older adults had greater agonist EMG activity with high-cognitive demand and women had greater coactivation than men (Pdemand for the older women but not for the older men (P = 0.03). Conclusion Older adults had reduced steadiness and increased muscle activation when high cognitive demand was imposed while low cognitive demand induced increased force fluctuations in older women but not older men. These findings have implications for daily and work-related tasks that involve cognitive demand performed simultaneously during submaximal isometric contractions in an aging workforce. PMID:25633070

Body size, swimming speed, or thermal sensitivity? Predator-imposed selection on amphibian larvae.

Science.gov (United States)

Gvoždík, Lumír; Smolinský, Radovan

2015-11-02

Many animals rely on their escape performance during predator encounters. Because of its dependence on body size and temperature, escape velocity is fully characterized by three measures, absolute value, size-corrected value, and its response to temperature (thermal sensitivity). The primary target of the selection imposed by predators is poorly understood. We examined predator (dragonfly larva)-imposed selection on prey (newt larvae) body size and characteristics of escape velocity using replicated and controlled predation experiments under seminatural conditions. Specifically, because these species experience a wide range of temperatures throughout their larval phases, we predict that larvae achieving high swimming velocities across temperatures will have a selective advantage over more thermally sensitive individuals. Nonzero selection differentials indicated that predators selected for prey body size and both absolute and size-corrected maximum swimming velocity. Comparison of selection differentials with control confirmed selection only on body size, i.e., dragonfly larvae preferably preyed on small newt larvae. Maximum swimming velocity and its thermal sensitivity showed low group repeatability, which contributed to non-detectable selection on both characteristics of escape performance. In the newt-dragonfly larvae interaction, body size plays a more important role than maximum values and thermal sensitivity of swimming velocity during predator escape. This corroborates the general importance of body size in predator-prey interactions. The absence of an appropriate control in predation experiments may lead to potentially misleading conclusions about the primary target of predator-imposed selection. Insights from predation experiments contribute to our understanding of the link between performance and fitness, and further improve mechanistic models of predator-prey interactions and food web dynamics.

Crystallization of high-strength nano-scale leucite glass-ceramics.

Science.gov (United States)

Theocharopoulos, A; Chen, X; Wilson, R M; Hill, R; Cattell, M J

2013-11-01

Fine-grained, high strength, translucent leucite dental glass-ceramics are synthesized via controlled crystallization of finely milled glass powders. The objectives of this study were to utilize high speed planetary milling of an aluminosilicate glass for controlled surface crystallization of nano-scale leucite glass-ceramics and to test the biaxial flexural strength. An aluminosilicate glass was synthesized, attritor or planetary milled and heat-treated. Glasses and glass-ceramics were characterized using particle size analysis, X-ray diffraction and scanning electron microscopy. Experimental (fine and nanoscale) and commercial (Ceramco-3, IPS Empress Esthetic) leucite glass-ceramics were tested using the biaxial flexural strength (BFS) test. Gaussian and Weibull statistics were applied. Experimental planetary milled glass-ceramics showed an increased leucite crystal number and nano-scale median crystal sizes (0.048-0.055 μm(2)) as a result of glass particle size reduction and heat treatments. Experimental materials had significantly (p0.05) strength difference. All other groups' mean BFS and characteristic strengths were found to be significantly different (pglass-ceramics with high flexural strength. These materials may help to reduce problems associated with brittle fracture of all-ceramic restorations and give reduced enamel wear. Copyright © 2013 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Determine bond strength by ultrasonic measurement

International Nuclear Information System (INIS)

Brown, C.M.

1978-01-01

Application of ultrasonic methods for the evaluation and measurement of bond strength has been the object of numerous investigations in the last fifteen years. Some investigators have reported good success (in limited application) while others have experienced dismal failure. One problem common to all investigations was the difficulty in extracting and isolating the many components which comprise the ultrasonic signal reflected from a bonded interface. Part of this problem was due to manually extracting individual parameters from large volumes of raw data. However, with the vast technology now available in the field of signal analysis and computerized data processing, it is feasible to isolate and analyze individual parameters within the ultrasonic signal for great volumes of raw data

Computational problems in science and engineering

CERN Document Server

Bulucea, Aida; Tsekouras, George

2015-01-01

This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.

42 CFR 422.752 - Basis for imposing intermediate sanctions and civil money penalties.

Science.gov (United States)

2010-10-01

... money penalties. 422.752 Section 422.752 Public Health CENTERS FOR MEDICARE & MEDICAID SERVICES... Sanctions § 422.752 Basis for imposing intermediate sanctions and civil money penalties. (a) All... sanctions at 422.750(a)(1) and (a)(3). (c) Civil Money Penalties. (1) CMS. In addition to, or in place of...

Alexithymia and psychosocial problems among Italian preadolescents. A latent class analysis approach.

Science.gov (United States)

Mannarini, Stefania; Balottin, Laura; Toldo, Irene; Gatta, Michela

2016-10-01

The study, conducted on Italian preadolscents aged 11 to 13 belonging to the general population, aims to investigate the relationship between the emotional functioning, namely, alexithymia, and the risk of developing behavioral and emotional problems measured using the Strength and Difficulty Questionnaire. The latent class analysis approach allowed to identify two latent variables, accounting for the internalizing (emotional symptoms and difficulties in emotional awareness) and for the externalizing problems (conduct problems and hyperactivity, problematic relationships with peers, poor prosocial behaviors and externally oriented thinking). The two latent variables featured two latent classes: the difficulty in dealing with problems and the strength to face problems that was representative of most of the healthy participants with specific gender differences. Along with the analysis of psychopathological behaviors, the study of resilience and strengths can prove to be a key step in order to develop valuable preventive approaches to tackle psychiatric disorders. © 2016 Scandinavian Psychological Associations and John Wiley & Sons Ltd.

The Strength Compass

DEFF Research Database (Denmark)

Ledertoug, Mette Marie

In the Ph.D-project ͚Strengths-based Learning - Children͛s character strengths as a means to their learning potential͛ 750 Danish children have assessed ͚The Strength Compass͛ in order to identify their strengths and to create awareness of strengths. This was followed by a strengths......-based intervention program in order to explore the strengths. Finally different methods to apply the strength in everyday life at school were applied. The paper presentation will show the results for strengths display for children aged 6-16 in different categories: Different age groups: Are the same strengths...... present in both small children and youths? Gender: Do the results show differences between the two genders? Danish as a mother- tongue language: Do the results show any differences in the strengths display when considering different language and cultural backgrounds? Children with Special Needs: Do...

28 CFR 522.12 - Relationship between existing criminal sentences imposed under the U.S. or D.C. Code and new...

Science.gov (United States)

2010-07-01

... sentences imposed under the U.S. or D.C. Code and new civil contempt commitment orders. 522.12 Section 522..., AND TRANSFER ADMISSION TO INSTITUTION Civil Contempt of Court Commitments § 522.12 Relationship between existing criminal sentences imposed under the U.S. or D.C. Code and new civil contempt commitment...

Effects of the imposed pressure differential conditions on duoplasmatron performance

International Nuclear Information System (INIS)

Oztarhan, A.

1988-01-01

The duoplasmatron plasma source (D.P.T.) was modified to allow access to the arc discharge (to measure the discharge properties) and to vary independently the pressures in different volumes of the arc with the aim of seeing if this freedom would help in optimising the output. The duoplasmatron plasma source was operated under normal running condition (N.R.C.), positive imposed pressure differential condition (P.I.P.D.C.) and negative imposed pressure differential condition (N.I.P.D.C.) and the corresponding properties of the plasma output were measured. Running the duoplasmatron under P.I.P.D. condition did not seem to improve the output as compared to that under N.R.C. However, running the duoplasmatron under N.I.P.D. condition seemed to be advantageous as the output increased by about 30%. It was observed that the back pressure was critical in maintaining the arc and the gap pressure could be lowered much below the normal minimum (while the arc was on) if back pressure was kept above a critical value. The results showed that the effects of varying the dimensions of the intermediate electrode nozzle on the output could be understood in terms of the effect of changes in these dimensions on the relative pressures. An empirical expression for the effect of the pressure ratio was developed from the observations and compared with the experimental results. The reasons for various results can be related to the plasma emission mechanism. (author). 8 refs, 6 figs, 1 tab

The Strength of the Strongest Ties in Collaborative Problem Solving

DEFF Research Database (Denmark)

de Montjoye, Yves-Alexandre; Stopczynski, Arkadiusz; Shmueli, Erez

2014-01-01

Complex problem solving in science, engineering, and business has become a highly collaborative endeavor. Teams of scientists or engineers collaborate on projects using their social networks to gather new ideas and feedback. Here we bridge the literature on team performance and information networks...... by studying teams' problem solving abilities as a function of both their within-team networks and their members' extended networks. We show that, while an assigned team's performance is strongly correlated with its networks of expressive and instrumental ties, only the strongest ties in both networks have...... an effect on performance. Both networks of strong ties explain more of the variance than other factors, such as measured or self-evaluated technical competencies, or the personalities of the team members. In fact, the inclusion of the network of strong ties renders these factors non...

Analisis Internal Perusahaan (Strength & Weakness), Menggunakan konsep ‘Resource-Based View of the Firm’ dengan Kerangka VRIO

OpenAIRE

Son Wandrial

2011-01-01

Problems in the company's internal environmental analysis is to determine the strengths and weaknesses (internal resources), we did not have reasonable grounds to determine whether the company's internal resources as a strength or weakness. Before we can determine whether a resource can be categorized as strengths or weaknesses, we must have a certain criteria so that appropriate resources are said to be a strength or weakness

Building Strengths of Character: Keys to Positive Youth Development

Science.gov (United States)

Park, Nansook

2009-01-01

Character is vital force for positive development and societal well-being. Character strengths play important roles in positive youth development, not only as broad-protective factors, preventing or mitigating psychopathology and problems, but also as enabling conditions that promote thriving and flourishing. Recent research findings show that…

Fracture strengths of chair‑side‑generated veneers cemented with ...

African Journals Online (AJOL)

Introduction: CAD/CAM (computer‑aided design and computer‑aided manufacturing) systems have refreshed the idea of chair‑side production of restorations, but the fracture of ceramic veneers remains a problem. Cementation with glass fibers may improve the fracture strengths and affect the failure modes of ...

Convergence of a strengths perspective and youth development: Toward youth promotion practice

Directory of Open Access Journals (Sweden)

Jeong Woong Cheon

2008-12-01

Full Text Available In recent years, increased attention has been paid to the development and application of the strengths perspective and positive youth development. This paper develops youth promotion practice as a convergence of a strengths perspective and youth development principles. Historical and contemporary contexts of a problem-focused perspective in social work with adolescents are reviewed and a critique developed with emphasis on the evolution of strengths-focused practices. The importance and possibility of combining the strengths perspective and youth development toward youth promotion practice are addressed. Youth promotion is defined as a process of enhancing youth strengths and resources to promote positive outcomes and help young people be healthy adults. Complementary aspects of the two perspectives are expected to support and supplement the strengths and weaknesses of each perspective in synergistic ways. Several advantages of youth promotion practice are discussed as well as its implications for improved social work practices with adolescents.

Self-assembly with orthogonal-imposed stimuli to impart structure and confer magnetic function to electrodeposited hydrogels.

Science.gov (United States)

Li, Ying; Liu, Yi; Gao, Tieren; Zhang, Boce; Song, Yingying; Terrell, Jessica L; Barber, Nathan; Bentley, William E; Takeuchi, Ichiro; Payne, Gregory F; Wang, Qin

2015-05-20

A magnetic nanocomposite film with the capability of reversibly collecting functionalized magnetic particles was fabricated by simultaneously imposing two orthogonal stimuli (electrical and magnetic). We demonstrate that cathodic codeposition of chitosan and Fe3O4 nanoparticles while simultaneously applying a magnetic field during codeposition can (i) organize structure, (ii) confer magnetic properties, and (iii) yield magnetic films that can perform reversible collection/assembly functions. The magnetic field triggered the self-assembly of Fe3O4 nanoparticles into hierarchical "chains" and "fibers" in the chitosan film. For controlled magnetic properties, the Fe3O4-chitosan film was electrodeposited in the presence of various strength magnetic fields and different deposition times. The magnetic properties of the resulting films should enable broad applications in complex devices. As a proof of concept, we demonstrate the reversible capture and release of green fluorescent protein (EGFP)-conjugated magnetic microparticles by the magnetic chitosan film. Moreover, antibody-functionalized magnetic microparticles were applied to capture cells from a sample, and these cells were collected, analyzed, and released by the magnetic chitosan film, paving the way for applications such as reusable biosensor interfaces (e.g., for pathogen detection). To our knowledge, this is the first report to apply a magnetic field during the electrodeposition of a hydrogel to generate magnetic soft matter. Importantly, the simple, rapid, and reagentless fabrication methodologies demonstrated here are valuable features for creating a magnetic device interface.

Strengths only or strengths and relative weaknesses? A preliminary study.

Science.gov (United States)

Rust, Teri; Diessner, Rhett; Reade, Lindsay

2009-10-01

Does working on developing character strengths and relative character weaknesses cause lower life satisfaction than working on developing character strengths only? The present study provides a preliminary answer. After 76 college students completed the Values in Action Inventory of Strengths (C. Peterson & M. E. P. Seligman, 2004), the authors randomly assigned them to work on 2 character strengths or on 1 character strength and 1 relative weakness. Combined, these groups showed significant gains on the Satisfaction With Life Scale (E. Diener, R. A. Emmons, R. J. Larsen, & S. Griffin, 1985), compared with a 32-student no-treatment group. However, there was no significant difference in gain scores between the 2-strengths group and the 1-character-strength-and-1-relative-character-weakness group. The authors discuss how focusing on relative character weaknesses (along with strengths) does not diminish-and may assist in increasing-life satisfaction.

CJEU rules on use of standards in imposing information duties on life insurance companies

NARCIS (Netherlands)

Mańko, R.

2015-01-01

The EU Directive applicable to life insurance sets out what kind of information insurance companies must give to policyholders. It also allows Member States to impose broader information duties, provided that the information is necessary for the policyholder to understand the contract. In its ruling

Characteristics of structural loess strength and preliminary framework for joint strength formula

OpenAIRE

Rong-jian Li; Jun-ding Liu; Rui Yan; Wen Zheng; Sheng-jun Shao

2014-01-01

The strength of structural loess consists of the shear strength and tensile strength. In this study, the stress path, the failure envelope of principal stress (Kf line), and the strength failure envelope of structurally intact loess and remolded loess were analyzed through three kinds of tests: the tensile strength test, the uniaxial compressive strength test, and the conventional triaxial shear strength test. Then, in order to describe the tensile strength and shear strength of structural lo...

Waste minimization and control: a review of problems and available technologies

International Nuclear Information System (INIS)

Butt, W.M.

1999-01-01

A country's environmental problems are affected by the level of its economic development, the availability of national resources, and the socio-economic level of this population. Poverty presents special problems for a heavily populated country with limited resources. environmental problems in Pakistan have become serious and should no longer be neglected. These relate air and water pollution particularly in metropolitan and industrial zones, degradation of common property sources which affect the poor adversely due to the degradation of their life support system, threat to biodiversity, inadequate system of solid waste disposal and sanitation with consequent adverse impact on health, infant mortality, birth rate. These problems impose a serious cost on society although it is impossible to comprehend the extent of these on costs. (author)

The influence of groundwater flow effect on changes of loess soil strength characteristics

Directory of Open Access Journals (Sweden)

Bida S.V.

2015-09-01

Full Text Available The problem of stability of slopes - one of the most topical at present. It is proved that the reliability of the slope stability assessment affects the accuracy of the strength characteristics of the soil. One of the most common methods is one-plane shifts method Established that processing of results of soil shift test in logarithmic coordinates can more accurately identify indicators of strength. Discovered that the magnitude of the strength characteristics of soil test results which is obtained on one plane shift depends on the vertical pressure during testing.

Analisis Internal Perusahaan (Strength & Weakness, Menggunakan konsep ‘Resource-Based View of the Firm’ dengan Kerangka VRIO

Directory of Open Access Journals (Sweden)

Son Wandrial

2011-11-01

Full Text Available Problems in the company's internal environmental analysis is to determine the strengths and weaknesses (internal resources, we did not have reasonable grounds to determine whether the company's internal resources as a strength or weakness. Before we can determine whether a resource can be categorized as strengths or weaknesses, we must have a certain criteria so that appropriate resources are said to be a strength or weakness

Strength in power sports: the latest scientific results

Directory of Open Access Journals (Sweden)

MÁRIO C. MARQUES

2011-06-01

Full Text Available Problem Statement: During the last decades, strength and power training has been a major issue for, coaches,athletes and researchers. Unfortunately, despite the increasing professionalization of coaches and athletes, thereis little research data concerning performance in elite athletes. Several studies showed that a specific strengthtraining program can improve athletes’ maximal force and power production, reduce the incidence of injury, andcontribute to faster injury recovery times, thereby minimizing the number of missed practice sessions andcompetitions. To our best knowledge, however, there is no apparent consensus on the appropriate method ofstrength and muscular power training to enhance performance, especially in typically power sports. On this,some questions remain unresolved and there have focused objective of our study: How much strength does anathlete need? Is the maximum strength the key for success? Is the muscular power the main issue?Approach: Therefore, the aim of this study focuses on a literature scientific search extended about strength inpower sports specifically.Results: Studies in this area continue to contradict because they differ markedly in terms of design factors,including mode, frequency, intensity, frequency of training, and training history of subjects.Conclusions/Recommendations: We can conclude that once a given level of strength training intensity hasbeen reached in trained athletes, the appropriate physiological adaptations may well be optimized and thattraining beyond this limit provides no further benefits

The strength compass

DEFF Research Database (Denmark)

Ledertoug, Mette Marie

of agreement/disagreement. Also the child/teacher is asked whether the actual strength is important and if he or she has the possibilities to apply the strength in the school. In a PhDproject ‘Strengths-based Learning - Children’s Character Strengths as Means to their Learning Potential’ 750 Danish children......Individual paper presentation: The ‘Strength Compass’. The results of a PhDresearch project among schoolchildren (age 6-16) identifying VIAstrengths concerning age, gender, mother-tongue-langue and possible child psychiatric diagnosis. Strengths-based interventions in schools have a theoretical...... Psychological Publishing Company. ‘The Strength Compass’ is a computer/Ipad based qualitative tool to identify the strengths of a child by a self-survey or a teacher’s survey. It is designed as a visual analogue scale with a statement of the strength in which the child/teacher may declare the degree...

Imposed Hispanicity: How the Imposition of Racialized and Gendered Identities in Texas Affects Mexican Women in Romantic Relationships with White Men

Directory of Open Access Journals (Sweden)

Jennifer C. Guillén

2015-11-01

Full Text Available Intimate, romantic spaces are important sites for the examination of self-identification and perceived identification, especially with regard to gender and racial power. In this article I examine how white men in romantic relationships or marriages with Mexican women and residing in Texas, impose “Hispanic” as a racial identity as a discursive tactic that reinforces the hegemonic power of being white and being a man in order to define the situation, impose ideals that distance Mexican partners from being “too ethnic” or “threatening” in order to achieve closer proximity to “honorary whiteness” and acceptability of racial others, and creates a romantic space that is coercive instead of loving and safe. This study thus finds that white men used their hegemony to not only employ imposed Hispanicity, which I define as an institutionally created but culturally and institutionally imposed label, and an action based on the use of direct and indirect coercion and force by others, in this case, white romantic partners, for the purpose of establishing power and determining the situation in which racial definitions are made. Therefore, “Hispanic” becomes an identity that is chosen by others and while participants of Mexican descent do employ agency, the socially imposed conditions and expectations associated with “Hispanic” serve to police the identities, bodies, lives, and actions of people of Latin American descent.

Short-term Periodization Models: Effects on Strength and Speed-strength Performance.

Science.gov (United States)

Hartmann, Hagen; Wirth, Klaus; Keiner, Michael; Mickel, Christoph; Sander, Andre; Szilvas, Elena

2015-10-01

Dividing training objectives into consecutive phases to gain morphological adaptations (hypertrophy phase) and neural adaptations (strength and power phases) is called strength-power periodization (SPP). These phases differ in program variables (volume, intensity, and exercise choice or type) and use stepwise intensity progression and concomitant decreasing volume, converging to peak intensity (peaking phase). Undulating periodization strategies rotate these program variables in a bi-weekly, weekly, or daily fashion. The following review addresses the effects of different short-term periodization models on strength and speed-strength both with subjects of different performance levels and with competitive athletes from different sports who use a particular periodization model during off-season, pre-season, and in-season conditioning. In most periodization studies, it is obvious that the strength endurance sessions are characterized by repetition zones (12-15 repetitions) that induce muscle hypertrophy in persons with a low performance level. Strictly speaking, when examining subjects with a low training level, many periodization studies include mainly hypertrophy sessions interspersed with heavy strength/power sessions. Studies have demonstrated equal or statistically significant higher gains in maximal strength for daily undulating periodization compared with SPP in subjects with a low to moderate performance level. The relatively short intervention period and the lack of concomitant sports conditioning call into question the practical value of these findings for competitive athletes. Possibly owing to differences in mesocycle length, conditioning programs, and program variables, competitive athletes either maintained or improved strength and/or speed-strength performance by integrating daily undulating periodization and SPP during off-season, pre-season and in-season conditioning. In high-performance sports, high-repetition strength training (>15) should be

Civilian End Strength Study. Study Sponsor ODCSLOG.

Science.gov (United States)

1985-12-30

Chief of Staff deferred action on the recommendations and requested a subsequent briefing with the following guidance. (1) Need to do more to take...Term Actions ... ..................... 38-39 ix CIVILIAN END STRENGTH STUDY Abstract This study examined the methodology by which the Army determines...DAPE-MBC) and COA ( DACA -OMP) has facilitated this process; an updated LOI, in draft, will clear up some of the problems identified in the test

The optimum content of rubber ash in concrete: flexural strength

Science.gov (United States)

Senin, M. S.; Shahidan, S.; Shamsuddin, S. M.; Ariffin, S. F. A.; Othman, N. H.; Rahman, R.; Khalid, F. S.; Nazri, F. M.

2017-11-01

Discarded scrap tyres have become one of the major environmental problems nowadays. Several studies have been carried out to reuse waste tires as an additive or sand replacement in concrete with appropriate percentages of tire rubber, called as rubberized concrete to solve this problem. The main objectives of this study are to investigate the flexural strength performance of concrete when adding the rubber ash and also to analyse the optimum content of rubber ash in concrete prisms. The performance total of 30 number of concrete prisms in size of 100mm x 100mm x 500 mm were investigated, by partially replacement of rubber ash with percentage of 0%, 3%, 5%, 7% and 9% from the volume of the sand. The flexural strength is increased when percentage of rubber ash is added 3% from control concrete prism, RA 0 for both concrete prism age, 7 days and 28 days with value 1.21% and 0.976% respectively. However, for RA 5, RA 7 and RA 9, the flexural strength was decreased compared to the control for both age, 7 days and 28 days. In conclusion, 3% is the optimum content of rubber ash in concrete prism for both concrete age

Bond strength of resin composite to differently conditioned amalgam

NARCIS (Netherlands)

Ozcan, M; Vallittu, PK; Huysmans, MC; Kalk, W; Vahlberg, T

Bulk fracture of teeth, where a part of the amalgam restoration and/or the cusp is fractured, is a common clinical problem. The aim of this study was to evaluate the effect of different surface conditioning methods on the shear bond strength of a hybrid resin composite to fresh amalgam. Amalgams (N

Computational problems in engineering

CERN Document Server

Mladenov, Valeri

2014-01-01

This book provides readers with modern computational techniques for solving variety of problems from electrical, mechanical, civil and chemical engineering. Mathematical methods are presented in a unified manner, so they can be applied consistently to problems in applied electromagnetics, strength of materials, fluid mechanics, heat and mass transfer, environmental engineering, biomedical engineering, signal processing, automatic control and more.   • Features contributions from distinguished researchers on significant aspects of current numerical methods and computational mathematics; • Presents actual results and innovative methods that provide numerical solutions, while minimizing computing times; • Includes new and advanced methods and modern variations of known techniques that can solve difficult scientific problems efficiently.  

The relationship between compressive strength and flexural strength of pavement geopolymer grouting material

Science.gov (United States)

Zhang, L.; Han, X. X.; Ge, J.; Wang, C. H.

2018-01-01

To determine the relationship between compressive strength and flexural strength of pavement geopolymer grouting material, 20 groups of geopolymer grouting materials were prepared, the compressive strength and flexural strength were determined by mechanical properties test. On the basis of excluding the abnormal values through boxplot, the results show that, the compressive strength test results were normal, but there were two mild outliers in 7days flexural strength test. The compressive strength and flexural strength were linearly fitted by SPSS, six regression models were obtained by linear fitting of compressive strength and flexural strength. The linear relationship between compressive strength and flexural strength can be better expressed by the cubic curve model, and the correlation coefficient was 0.842.

If PBL is the answer, then what is the problem?

DEFF Research Database (Denmark)

Huttel, Hans; Gnaur, Dorina

of project work in the undergraduate degree programme in computer science at Aalborg University. Danish PBL-based higher education institutions espouse the qualities of problembased projects but actual practice shows a different picture. The predominant use of project catalogues and the formal requirements......This paper identifies and analyzes problems with routinization of project work in PBL-based degree programmes and points towards possible solutions. The paper uses a survey of students’ and supervisor’s perceptions of project work in the context of attempts to emphasize problem-based aspects...... imposed by accreditation inhibit central intentions behind problem-based project work. The study reported on is limited to a specific degree programme and to a particular approach to dealing with the problem of routinization. The findings in this paper point towards the need for action research into new...

76 FR 74690 - Extension of Import Restrictions Imposed on Archaeological and Ethnological Material From Bolivia

Science.gov (United States)

2011-12-01

... and Ethnological Material From Bolivia AGENCY: U.S. Customs and Border Protection; Department of... archaeological and ethnological material from Bolivia. The restrictions, which were originally imposed by... archaeological and ethnological material from Bolivia to which the restrictions apply. DATES: Effective Date...

Push-off tests and strength evaluation of joints combining shrink fitting with bonding

Science.gov (United States)

Yoneno, Masahiro; Sawa, Toshiyuki; Shimotakahara, Ken; Motegi, Yoichi

1997-03-01

Shrink fitted joints have been used in mechanical structures. Recently, joints combining shrink fitting with anaerobic adhesives bonded between the shrink fitted surfaces have been appeared in order to increase the joint strength. In this paper, push-off test was carried out on strength of joints combining shrink fitting with bonding by material testing machine. In addition, the push-off strength of shrink fitting joints without an anaerobic adhesive was also measured. In the experiments, the effects of the shrinking allowance and the outer diameter of the rings on the joint strength are examined. The interface stress distribution in bonded shrink fitted joints subjected to a push-off load is analyzed using axisymmetrical theory of elasticity as a four-body contact problem. Using the interface stress distribution, a method for estimating joint strength is proposed. The experimental results are in a fairly good agreement with the numerical results. It is found that the strength of combination joints is greater than that of shrink fitted joints.

On strength design using free material subjected to multiple load cases

DEFF Research Database (Denmark)

Pedersen, Pauli; Pedersen, Niels Leergaard

2013-01-01

Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together with a prac......Multiple load cases and the consideration of strength is a reality that most structural designs are exposed to. Improved possibility to produce specific materials, say by fiber lay-up, put focus on research on free material optimization. A formulation for such design problems together...... with a practical recursive design procedure is presented and illustrated with examples. The presented finite element analysis involve many elements as well as many load cases. Separating the local amount of material from a description with unit trace for the local anisotropy, gives the free materials formulation...

Transition to magnetorotational turbulence in Taylor–Couette flow with imposed azimuthal magnetic field

International Nuclear Information System (INIS)

A Guseva; Avila, M; Willis, A P; Hollerbach, R

2015-01-01

The magnetorotational instability (MRI) is thought to be a powerful source of turbulence and momentum transport in astrophysical accretion discs, but obtaining observational evidence of its operation is challenging. Recently, laboratory experiments of Taylor–Couette flow with externally imposed axial and azimuthal magnetic fields have revealed the kinematic and dynamic properties of the MRI close to the instability onset. While good agreement was found with linear stability analyses, little is known about the transition to turbulence and transport properties of the MRI. We here report on a numerical investigation of the MRI with an imposed azimuthal magnetic field. We show that the laminar Taylor–Couette flow becomes unstable to a wave rotating in the azimuthal direction and standing in the axial direction via a supercritical Hopf bifurcation. Subsequently, the flow features a catastrophic transition to spatio-temporal defects which is mediated by a subcritical subharmonic Hopf bifurcation. Our results are in qualitative agreement with the PROMISE experiment and dramatically extend their realizable parameter range. We find that as the Reynolds number increases defects accumulate and grow into turbulence, yet the momentum transport scales weakly. (paper)

Bond strength of masonry

NARCIS (Netherlands)

Pluijm, van der R.; Vermeltfoort, A.Th.

1992-01-01

Bond strength is not a well defined property of masonry. Normally three types of bond strength can be distinguished: - tensile bond strength, - shear (and torsional) bond strength, - flexural bond strength. In this contribution the behaviour and strength of masonry in deformation controlled uniaxial

In-service behaviour of creep strength enhanced ferritic steels Grade 91 and Grade 92 – Part 2 weld issues

International Nuclear Information System (INIS)

Parker, Jonathan

2014-01-01

In Creep Strength Enhanced Ferritic steels control of both composition and heat treatment of the parent steel is necessary to avoid producing components which have properties below the minimum expected by applicable codes. The degree of tempering involved in manufacture will modify the material hardness. While under most conditions hardness is reduced by tempering, exceeding the AC 1 temperature can lead to an increase in hardness. In this heat treatment the properties will be relatively poor even though the measured hardness may be apparently acceptable. Thus, care should be exercised in imposing an acceptance test of components based on simple hardness alone. Differences in parent material heat treatment and composition apparently have remarkably little influence on the creep life of the heat affect zone (HAZ). Thus, Type IV cracking in the fine grained or intercritically heat treated regions of the HAZ does not appear to directly depend on the strength of the base steel. This form of in-service damage is relatively difficult to detect using traditional methods of non-destructive testing. Moreover, since repeated heat treatment leads to over tempering and a degradation of properties, specific procedures for making and then lifing repair welds are required. The present paper summarizes examples of damage and discusses best option repairs. -- Highlights: ► For many components damage in the weld heat affected zone will be the primary source of in-service problems. ► Repair approaches should consider the influence of heat flow on metallurgical transformations. ► Both development of residual stresses and the local properties of the constituent zones influence Type IV damage. ► Serviceability of components in the creep range must consider stress, temperature and applicable material properties

Effects of exercise improves muscle strength and fat mass in patients with high fracture risk: A randomized control trial

Directory of Open Access Journals (Sweden)

Ding-Cheng Chan

2018-07-01

Full Text Available Background: The deterioration of the musculoskeletal system imposes significant impact on physical activity. Exercise is an important strategy which minimizes these changes. It is not clear which type of exercise provides better improvement on low physical performance, low muscle mass and low strength of sarcopenia. We aim to develop an integrated care (IC model and compare its relative efficacy in limb fat free mass, muscle strength, and physical performance with low extremities exercise (LEE in community dwelling older adults with high risk of fractures (Fracture Risk Assessment Tool (FRAX® ≧3% for hip fracture, ≧20% for major osteoporotic fracture or 1-min osteoporosis risk test (≧1 point or fall (≧2 falls in previous year. Methods: Patients were assigned randomized to participate in either IC or LEE group (n = 55 each for 3 months. All participants received education including home-based exercise. The IC group consisted of different modalities of exercise while the LEE group performed machine-based low extremities exercise. Fat free mass, muscle strength, and physical performance were measured at their baseline and 3-months follow-up. Results: Mean age was 73.8 ± 7 years with 69.1% women. Entire cohort demonstrated significant increment in fat free mass, muscle strength (4 indicators and physical performance (3 indicators. However, between group differences were not significant. Conclusion: With regular supervise exercise; both groups are equally effective in decreasing fat mass and increasing physical performance, muscle mass and strength. However, the IC group required fewer resources and thus more financially feasible in a community setting. Keywords: Bone mineral density, Gender differences, Integrated care, Low extremities exercise, Muscle strength

Current problems of the nuclear power - society relationship in Romania

International Nuclear Information System (INIS)

Constantin, Marin

2004-01-01

The present work tries to make an analysis of the current aspects of the interaction between the nuclear field, environment and society. One starts from the general conception of sustainable development. The analysis focusses mainly the social side of the sustainable development and the environmental protection issues. As prominent appears the sensitive problem of radioactive waste management. The papers analyses the current public perception, the mutations expected in the public opinion as well as the problems which the nuclear industry and decision makers confront to harmonize the requirements in the nuclear power sector and those imposed by society. Particularly focused is the situation in Romania

Reference Values of Grip Strength, Prevalence of Low Grip Strength, and Factors Affecting Grip Strength Values in Chinese Adults.

Science.gov (United States)

Yu, Ruby; Ong, Sherlin; Cheung, Osbert; Leung, Jason; Woo, Jean

2017-06-01

The objectives of this study were to update the reference values of grip strength, to estimate the prevalence of low grip strength, and to examine the impact of different aspects of measurement protocol on grip strength values in Chinese adults. A cross-sectional survey of Chinese men (n = 714) and women (n = 4014) aged 18-102 years was undertaken in different community settings in Hong Kong. Grip strength was measured with a digital dynamometer (TKK 5401 Grip-D; Takei, Niigata, Japan). Low grip strength was defined as grip strength 2 standard deviations or more below the mean for young adults. The effects of measurement protocol on grip strength values were examined in a subsample of 45 men and women with repeated measures of grip strength taken with a hydraulic dynamometer (Baseline; Fabrication Enterprises Inc, Irvington, NY), using pair t-tests, intraclass correlation coefficient, and Bland and Altman plots. Grip strength was greater among men than among women (P values than the Baseline hydraulic dynamometer (P values were also observed when the measurement was performed with the elbow extended in a standing position, compared with that with the elbow flexed at 90° in a sitting position, using the same dynamometer (P values of grip strength and estimated the prevalence of low grip strength among Chinese adults spanning a wide age range. These findings might be useful for risk estimation and evaluation of interventions. However, grip strength measurements should be interpreted with caution, as grip strength values can be affected by type of dynamometer used, assessment posture, and elbow position. Copyright © 2017 AMDA – The Society for Post-Acute and Long-Term Care Medicine. Published by Elsevier Inc. All rights reserved.

Strength of Anode‐Supported Solid Oxide Fuel Cells

DEFF Research Database (Denmark)

Faes, A.; Frandsen, Henrik Lund; Kaiser, Andreas

2011-01-01

Nickel oxide and yttria doped zirconia composite strength is crucial for anode‐supported solid oxide fuel cells, especially during transient operation, but also for the initial stacking process, where cell curvature after sintering can cause problems. This work first compares tensile and ball....... Even though the electrolyte is to the tensile side, it is found that the anode support fails due to the thermo‐mechanical residual stresses....

Complexity of generic biochemical circuits: topology versus strength of interactions

Science.gov (United States)

Tikhonov, Mikhail; Bialek, William

2016-12-01

The historical focus on network topology as a determinant of biological function is still largely maintained today, illustrated by the rise of structure-only approaches to network analysis. However, biochemical circuits and genetic regulatory networks are defined both by their topology and by a multitude of continuously adjustable parameters, such as the strength of interactions between nodes, also recognized as important. Here we present a class of simple perceptron-based Boolean models within which comparing the relative importance of topology versus interaction strengths becomes a quantitatively well-posed problem. We quantify the intuition that for generic networks, optimization of interaction strengths is a crucial ingredient of achieving high complexity, defined here as the number of fixed points the network can accommodate. We propose a new methodology for characterizing the relative role of parameter optimization for topologies of a given class.

77 FR 33624 - Extension of Import Restrictions Imposed on Archaeological and Ethnological Materials From Peru

Science.gov (United States)

2012-06-07

... and Ethnological Materials From Peru AGENCY: U.S. Customs and Border Protection, Department of... archaeological and ethnological material from Peru. The restrictions, which were originally imposed by Treasury... with the Republic of Peru on June 9, 1997, concerning the imposition of import restrictions on pre...

Problems faced by host nations in accepting visits by nuclear powered merchant ships

International Nuclear Information System (INIS)

Crancher, D.W.

1978-01-01

An international Code of Practice would make a major contribution to the effective regulation of nuclear merchant ships. Ensuring compliance with such a Code would be a significant problem for host nations. An impediment to the development of nuclear shipping is the absence of third party liability provision. There are also problems in host port acceptance into crowded ports and some limitations may be imposed until there is more confidence. There are indications that ship accidents will become the predominant risk and considerably more attention to the problem is required. Waste management need not be a major issue to the acceptance of nuclear merchant ships

Analytical evaluation of the environment effect on creep rupture strength

International Nuclear Information System (INIS)

Tamura, Manabu; Ogawa, Yutaka; Kurata, Yuji; Kondo, Tatsuo

1982-04-01

An analytical approach was made in evaluating semi-quantitatively the effect of environment on rupture strength of materials. In the analysis the zone formed in the material by reaction with the environment was assumed to bear the applied load as one of the strength members. In calculations a law of mixtures of creep strength and the linear damage rule were applied. In the modeling of the load bearing by the composite structure of the environment-affected and intact zones, both parallel and series models were considered to formulate the equations. The equation for the parallel-loaded model was properly adopted in explaining semi-quantitatively the case of Incoloy alloy 800 crept in air, which was strengthened with the layer formed by nitrization. The equation for the serially loaded model was more successfully adopted to the evaluation of the rupture strength of dissimilar weld joints. The latter was also considered to be potentially adoptable to the problems of the effect of specimen size and shape on rupture strength, which had been often taken into account in evaluating the environment effect. For application of the developed method, examination was made to the possible decrease in rupture strength of Hastelloy alloy XR in long term tests by the formation of Cr depleted zone due to oxidation in HTGR impure helium, and the results were compared with the values obtained by experiments. (author)

Strength and Biot's coefficient for high-porosity oil- or water-saturated chalk

DEFF Research Database (Denmark)

Andreassen, Katrine Alling

. The Biot coefficient states the degree of cementation or how the pore pressure contributes to the strain resulting from an external load for a porous material. It is here calculated from dynamic measurements and correlated with the strength of outcrop chalk characterized by the onset of pore collapse...... during hydrostatic loading. The hypothesis is that the Biot coefficient and the theory of poroelasticity may cover the fluid effect by including the increased fluid bulk modulus from oil to water. A high number of test results for both oil- and water-saturated high-porosity outcrop chalk show correlation......In the petroleum industry it is relevant to know the Biot coefficient for establishing the effective stresses present in both the overburden and for the reservoir interval. When depleting a reservoir it is important to estimate the settlement through the strain imposed by the effective stress. Also...

On the influence of load variations on lifetime and strength of wood

DEFF Research Database (Denmark)

Nielsen, Lauge Fuglsang

2006-01-01

To days recommendations for probability and reliability analysis of wood structures do not fully recognize the influence of wood microstructure and creep on the mechanical behavior of wood. As a consequence, certain important features in wood design cannot be considered properly. Ignoring the bas...... history on recycle-strength (residual strength). It is demonstrated in this paper, how the problems just mentioned can be solved from respecting wood as a damaged viscoelastic material, meaning that wood is a cracked (damaged) material with creep....

The effectiveness of development programming strength in primary school children

Directory of Open Access Journals (Sweden)

O.M. Khudolii

2013-07-01

Full Text Available The problems of optimizing development strength in primary school children. The purpose of the program is to validate the technology development strength abilities in the classroom physical education at school. A program of strength training by taking into account the effects of power loads. Found that the use of the combined method (option I makes it possible to obtain positive results in force readiness school classes 2-4 through 3-9 sessions. The combined method (option II significantly affects the dynamics of the forces of the local group of muscles. The use of mobile gaming allows for a higher level of emotional strength to develop the ability of students. The dynamics of power indices (option II significantly affects operation: dynamic method - 25-45 reps (rest interval between sets 30-60 seconds, the method of maximum effort - 18-30 reps (rest interval between sets 30-60 seconds method of isometric effort - 15-25 reps (rest interval between sets 30-60 seconds, the method of repeated efforts - 36-60 reps (rest interval between sets 30-60 seconds.

The effectiveness of development programming strength in primary school children

Directory of Open Access Journals (Sweden)

Khudolii O.M.

2013-06-01

Full Text Available The problems of optimizing development strength in primary school children. The purpose of the program is to validate the technology development strength abilities in the classroom physical education at school. A program of strength training by taking into account the effects of power loads. Found that the use of the combined method (option I makes it possible to obtain positive results in force readiness school classes 2-4 through 3-9 sessions. The combined method (option II significantly affects the dynamics of the forces of the local group of muscles. The use of mobile gaming allows for a higher level of emotional strength to develop the ability of students. The dynamics of power indices (option II significantly affects operation: dynamic method - 25-45 reps (rest interval between sets 30-60 seconds, the method of maximum effort - 18-30 reps (rest interval between sets 30-60 seconds method of isometric effort - 15-25 reps (rest interval between sets 30-60 seconds, the method of repeated efforts - 36-60 reps (rest interval between sets 30-60 seconds.

Development of K-Basin High-Strength Homogeneous Sludge Simulants and Correlations Between Unconfined Compressive Strength and Shear Strength

Energy Technology Data Exchange (ETDEWEB)

Onishi, Yasuo; Baer, Ellen BK; Chun, Jaehun; Yokuda, Satoru T.; Schmidt, Andrew J.; Sande, Susan; Buchmiller, William C.

2011-02-20

K-Basin sludge will be stored in the Sludge Transport and Storage Containers (STSCs) at an interim storage location on Central Plateau before being treated and packaged for disposal. During the storage period, sludge in the STSCs may consolidate/agglomerate, potentially resulting in high-shear-strength material. The Sludge Treatment Project (STP) plans to use water jets to retrieve K-Basin sludge after the interim storage. STP has identified shear strength to be a key parameter that should be bounded to verify the operability and performance of sludge retrieval systems. Determining the range of sludge shear strength is important to gain high confidence that a water-jet retrieval system can mobilize stored K-Basin sludge from the STSCs. The shear strength measurements will provide a basis for bounding sludge properties for mobilization and erosion. Thus, it is also important to develop potential simulants to investigate these phenomena. Long-term sludge storage tests conducted by Pacific Northwest National Laboratory (PNNL) show that high-uranium-content K-Basin sludge can self-cement and form a strong sludge with a bulk shear strength of up to 65 kPa. Some of this sludge has 'paste' and 'chunks' with shear strengths of approximately 3-5 kPa and 380-770 kPa, respectively. High-uranium-content sludge samples subjected to hydrothermal testing (e.g., 185 C, 10 hours) have been observed to form agglomerates with a shear strength up to 170 kPa. These high values were estimated by measured unconfined compressive strength (UCS) obtained with a pocket penetrometer. Due to its ease of use, it is anticipated that a pocket penetrometer will be used to acquire additional shear strength data from archived K-Basin sludge samples stored at the PNNL Radiochemical Processing Laboratory (RPL) hot cells. It is uncertain whether the pocket penetrometer provides accurate shear strength measurements of the material. To assess the bounding material strength and

Contemporary Limitations to Religious Solution to Social Problems ...

African Journals Online (AJOL)

In addition, cultural differences, political pressures, and plurality of values weaken the therapeutic strength of religion as it attends to social problems. Finally, this paper argues that religion as a social capital can reduce the menace of social problems if its institutions can be trusted by the people in the society. Key Words: ...

Solving eigenvalue problems on curved surfaces using the Closest Point Method

KAUST Repository

Macdonald, Colin B.

2011-06-01

Eigenvalue problems are fundamental to mathematics and science. We present a simple algorithm for determining eigenvalues and eigenfunctions of the Laplace-Beltrami operator on rather general curved surfaces. Our algorithm, which is based on the Closest Point Method, relies on an embedding of the surface in a higher-dimensional space, where standard Cartesian finite difference and interpolation schemes can be easily applied. We show that there is a one-to-one correspondence between a problem defined in the embedding space and the original surface problem. For open surfaces, we present a simple way to impose Dirichlet and Neumann boundary conditions while maintaining second-order accuracy. Convergence studies and a series of examples demonstrate the effectiveness and generality of our approach. © 2011 Elsevier Inc.

Strengths-based Learning

DEFF Research Database (Denmark)

Ledertoug, Mette Marie

-being. The Ph.D.-project in Strength-based learning took place in a Danish school with 750 pupils age 6-16 and a similar school was functioning as a control group. The presentation will focus on both the aware-explore-apply processes and the practical implications for the schools involved, and on measurable......Strength-based learning - Children͛s Character Strengths as Means to their Learning Potential͛ is a Ph.D.-project aiming to create a strength-based mindset in school settings and at the same time introducing strength-based interventions as specific tools to improve both learning and well...

The Problem of Solidarity in Insurgent Collective Action

DEFF Research Database (Denmark)

Pfaff, Steven; Hechter, Michael Norman; Corcoran, Katie

2016-01-01

in the Royal Navy in 1797, this article explains why insurgent solidarity varied among the ships participating in the mutiny. Maintaining solidarity was the key problem that the organizers of the mutiny faced in confronting government repression and inducements for ships’ companies to defect. Solidarity......, proxied here as the duration of a ship's company's adherence to the mutiny, relied on techniques used by the mutiny leadership that increased dependence and imposed control over rank-and-file seamen. In particular, mutiny leaders monitored and sanctioned compliance and exploited informational asymmetries...

WKB analysis of PT-symmetric Sturm–Liouville problems

International Nuclear Information System (INIS)

Bender, Carl M; Jones, Hugh F

2012-01-01

Most studies of PT-symmetric quantum-mechanical Hamiltonians have considered the Schrödinger eigenvalue problem on an infinite domain. This paper examines the consequences of imposing the boundary conditions on a finite domain. As is the case with regular Hermitian Sturm–Liouville problems, the eigenvalues of the PT-symmetric Sturm–Liouville problem grow like n 2 for large n. However, the novelty is that a PT eigenvalue problem on a finite domain typically exhibits a sequence of critical points at which pairs of eigenvalues cease to be real and become complex conjugates of one another. For the potentials considered here this sequence of critical points is associated with a turning point on the imaginary axis in the complex plane. WKB analysis is used to calculate the asymptotic behaviours of the real eigenvalues and the locations of the critical points. The method turns out to be surprisingly accurate even at low energies. This article is part of a special issue of Journal of Physics A: Mathematical and Theoretical devoted to ‘Quantum physics with non-Hermitian operators’. (paper)

Flowchart-format emergency operating procedures-strengths and weaknesses

International Nuclear Information System (INIS)

Barnes, V.E.; Bongarra, J.P. Jr.

1989-01-01

An increasing number of nuclear power plant licensees are converting their text-format emergency operating procedures (EOPs) to flowcharts. Findings of a recent study of the flowchart-format EOPs indicate that the flowchart format appears to solve several significant usability problems associated with text-format EOPs, but also introduces other types of usability concerns. This paper discusses some of the strengths and weaknesses of the flowchart format for presenting EOPs

Are only Emotional Strengths Emotional? Character Strengths and Disposition to Positive Emotions.

Science.gov (United States)

Güsewell, Angelika; Ruch, Willibald

2012-07-01

This study aimed to examine the relations between character strengths and dispositional positive emotions (i.e. joy, contentment, pride, love, compassion, amusement, and awe). A sample of 574 German-speaking adults filled in the Dispositional Positive Emotion Scales (DPES; Shiota, Keltner, & John, 2006), and the Values in Action Inventory of Strengths (VIA-IS; Peterson, Park, & Seligman, 2005). The factorial structure of the DPES was examined on item level. Joy and contentment could not be clearly separated; the items of the other five emotions loaded on separate factors. A confirmatory factor analysis assuming two latent factors (self-oriented and object/situation specific) was computed on scale level. Results confirmed the existence of these factors, but also indicated that the seven emotions did not split up into two clearly separable families. Correlations between dispositional positive emotions and character strengths were positive and generally low to moderate; a few theoretically meaningful strengths-emotions pairs yielded coefficients>.40. Finally, the link between five character strengths factors (i.e. emotional strengths, interpersonal strengths, strengths of restraint, intellectual strengths, and theological strengths) and the emotional dispositions was examined. Each of the factors displayed a distinctive "emotional pattern"; emotional strengths evidenced the most numerous and strongest links to emotional dispositions. © 2012 The Authors. Applied Psychology: Health and Well-Being © 2012 The International Association of Applied Psychology.

Substantiation of vibration strength of nuclear reactor and steam generator internals. Main problems

International Nuclear Information System (INIS)

Fyodorov, V.G.; Sinyavasky, V.F.

1977-01-01

The report details the scope and priority of studies necessary for substantiation of vibration strength of steam generator tube bundles and reactor fuel assemblies, and design modifications helping to reduce flow-induced vibration of the internals specified. Steam generator tube bundles are studied on the basis of a standard establishing vibration requirements at various stages of design, manufacture and operation of a steam generator at a nuclear power station. The main vibration characteristics of tubes obtained through model and full-scale tests are compared with calculation results. Results are provided concerning test-stand vibration tests of fuel elements and fuel assemblies. (author)

The role of ab initio electronic structure calculations in studies of the strength of materials

International Nuclear Information System (INIS)

Sob, M.; Friak, M.; Legut, D.; Fiala, J.; Vitek, V.

2004-01-01

In this paper we give an account of applications of quantum-mechanical (first-principles) electronic structure calculations to the problem of theoretical tensile strength in metals and intermetallics. First, we review previous as well as ongoing research on this subject. We then describe briefly the electronic structure calculational methods and simulation of the tensile test. This approach is then illustrated by calculations of theoretical tensile strength in iron and in the intermetallic compound Ni 3 Al. The anisotropy of calculated tensile strength is explained in terms of higher-symmetry structures encountered along the deformation paths studied. The table summarizing values of theoretical tensile strengths calculated up to now is presented and the role of ab initio electronic structure calculations in contemporary studies of the strength of material is discussed

26 CFR 1.6664-3 - Ordering rules for determining the total amount of penalties imposed.

Science.gov (United States)

2010-04-01

... OF THE TREASURY (CONTINUED) INCOME TAX (CONTINUED) INCOME TAXES Additions to the Tax, Additional... that the taxpayers made a timely estimated tax payment of $1,500 for 1989 which they failed to claim... imposed. (a) In general. This section provides rules for determining the order in which adjustments to a...

Minimal investment risk of a portfolio optimization problem with budget and investment concentration constraints

Science.gov (United States)

Shinzato, Takashi

2017-02-01

In the present paper, the minimal investment risk for a portfolio optimization problem with imposed budget and investment concentration constraints is considered using replica analysis. Since the minimal investment risk is influenced by the investment concentration constraint (as well as the budget constraint), it is intuitive that the minimal investment risk for the problem with an investment concentration constraint can be larger than that without the constraint (that is, with only the budget constraint). Moreover, a numerical experiment shows the effectiveness of our proposed analysis. In contrast, the standard operations research approach failed to identify accurately the minimal investment risk of the portfolio optimization problem.

Influence of silica fume on the strength of high strength concrete

International Nuclear Information System (INIS)

Akram, T.; Memon, S.A.; Khan, S.A.

2007-01-01

HSC (High Strength Concrete) does not become evident by a sudden change in the behavior of 'ordinary strength' concrete. There is a gradual effect that becomes more noticeable when the strength level exceeds about 40-45 MPa. There cannot be a precise level of strength which defines this change in effect. The effects are on strength and workability, requiring us to take into account in our mix proportioning, the ramifications of fineness of cement on workability and of type of aggregate and aggregate/cement ratio on strength. In fact, the selection of materials becomes more critical as the concrete strength increases and that if very high strength is required (100 MPa and higher), relatively few materials may be suitable. An experimental investigation is carried out to evaluate the feasibility of producing HSC using locally available materials and to study the influence of silica fume on the strength of HSC. The main variables in this research is amount of silica fume. The parameters that are kept constant are the amount of cement equal to 580 kg/m3, dosage of HRWRA (High Range Water Reducing Admictures) equal to 4 % by weight of cementitious materials and the ratio of fine aggregate to coarse aggregate (1:2.3). Test results revealed that it is feasible to produce HSC using locally available materials. The optimum percentage of silica fume was found to be 15 % by weight of cement. (author)

A design method for two-layer beams consisting of normal and fibered high strength concrete

International Nuclear Information System (INIS)

Iskhakov, I.; Ribakov, Y.

2007-01-01

Two-layer fibered concrete beams can be analyzed using conventional methods for composite elements. The compressed zone of such beam section is made of high strength concrete (HSC), and the tensile one of normal strength concrete (NSC). The problems related to such type of beams are revealed and studied. An appropriate depth of each layer is prescribed. Compatibility conditions between HSC and NSC layers are found. It is based on the shear deformations equality on the layers border in a section with maximal depth of the compression zone. For the first time a rigorous definition of HSC is given using a comparative analysis of deformability and strength characteristics of different concrete classes. According to this definition, HSC has no download branch in the stress-strain diagram, the stress-strain function has minimum exponent, the ductility parameter is minimal and the concrete tensile strength remains constant with an increase in concrete compression strength. The application fields of two-layer concrete beams based on different static schemes and load conditions make known. It is known that the main disadvantage of HSCs is their low ductility. In order to overcome this problem, fibers are added to the HSC layer. Influence of different fiber volume ratios on structural ductility is discussed. An upper limit of the required fibers volume ratio is found based on compatibility equation of transverse tensile concrete deformations and deformations of fibers

Association Between Maximal Bench Press Strength and Isometric Handgrip Strength Among Breast Cancer Survivors.

Science.gov (United States)

Rogers, Benjamin H; Brown, Justin C; Gater, David R; Schmitz, Kathryn H

2017-02-01

To characterize the relationship between 1-repetition maximum (1-RM) bench press strength and isometric handgrip strength among breast cancer survivors. Cross-sectional study. Laboratory. Community-dwelling breast cancer survivors (N=295). Not applicable. 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer, with 3 maximal contractions of the left and right hands. All measures were conducted by staff with training in clinical exercise testing. Among 295 breast cancer survivors, 1-RM bench press strength was 18.2±6.1kg (range, 2.2-43.0kg), and isometric handgrip strength was 23.5±5.8kg (range, 9.0-43.0kg). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7kg (95% limits of agreement, -8.2 to 17.6kg). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=.31; Pstrength (R 2 =.23). Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among breast cancer survivors. 1-RM bench press strength and isometric handgrip strength quantify distinct components of muscular strength. Copyright © 2016 American Congress of Rehabilitation Medicine. Published by Elsevier Inc. All rights reserved.

Economic issues in the legacy problem

International Nuclear Information System (INIS)

Kneese, A.V.; Ben-David, S.; Brookshire, D.S.; Schulze, W.D.; Boldt, D.

1984-01-01

Working under a grant from the Ethics and Values in Science and Technology Program of the National Science Foundation, the authors examined some of the ethical foundations and implications of cost-benefit analysis, which is increasingly used for problems (such as nuclear policy) with long-term implications. Three ethical economic problems are that the ''correct'' distribution of costs and benefits may not occur, the discounting rate may impose unfair burdens on different generations, and that of assigning a dollar value to human life and safety. The notion of an ethical system as it pertains to these issues is developed, with cost-benefit analysis modified to incorporate weighting structures consistent with four alternative ethical systems: utilitarian, totally egalitarian, totally elitist, and libertarian, and applied to a case study of nuclear power. The study concludes that the unusual time distribution of costs and their potential magnitudes raises questions about discounting and looking only at the present value. 23 references, 2 figures, 7 tables

Challenges Imposed by User's Mobility in Future HetNet: Offloading and Mobility Management

OpenAIRE

Mahbas, Ali

2017-01-01

The users' mobility imposes challenges to mobility management and, the offloading process, which hinder the conventional heterogeneous networks (HetNets) in meeting the huge data traffic requirements of the future. In this thesis, a trio-connectivity (TC), which includes a control-plane (C-plane), a user-plane (U-plane) and an indication-plane (I-plane), is proposed to tackle these challenges. Especially, the I-plane is created as an indicator to help the user equipment (UE) identify and...

Inclusion of inhomogeneous deformation and strength characteristics in the problem on zonal disintegration of rocks

Science.gov (United States)

Chanyshev, AI; Belousova, OE

2018-03-01

The authors determine stress and deformation in a heterogeneous rock mass at the preset displacement and Cauchy stress vector at the boundary of an underground excavation. The influence of coordinates on Young’s modulus, shear modulus and ultimate strength is shown. It is found that regions of tension and compression alternate at the excavation boundary—i.e. zonal rock disintegration phenomenon is observed.

Ethical problems and moral sensitivity in physiotherapy: a descriptive study.

Science.gov (United States)

Kulju, Kati; Suhonen, Riitta; Leino-Kilpi, Helena

2013-08-01

This study identified and described ethical problems encountered by physiotherapists in their practice and physiotherapists' moral sensitivity in ethical situations. A questionnaire-based survey was constructed to identify ethical problems, and the Moral Sensitivity Questionnaire Revised version was used to measure moral sensitivity. Physiotherapists (n = 116) working in public health services responded to the questionnaire. Based on the results, most of the physiotherapists encounter ethical problems weekly. They concern mainly financial considerations, equality and justice, professionalism, unethical conduct of physiotherapists or other professions and patients' self-determination. The dimension of moral strength was emphasised in physiotherapists' self-evaluations of their moral sensitivity. As a conclusion, ethical problems do occur not only at individual level but also at organisational and society level. Physiotherapists seem to have moral strength for speaking on behalf of the patient. Scarce resources make them feel insufficient but much could still be done to provide quality care in co-operation with other health-care professionals.

Tests of Hadronic Probes of GT Strength

CERN Multimedia

2002-01-01

There are many important problems where one wishes to know the distribution of Gamow-Teller (GT) strength in circumstances where it cannot be measured directly (for example, because of energy-release limitations). Then one must rely on hadronic probes to infer the GT strength. It is therefore essential to test these probes as extensively as possible. The isospin-analog transitions in $^{37}$Ca $\\beta^{+}$ -decay and $^{37}$Cl$(p, n)$ provide an excellent ground for such a test. Recent $^{37}$Cl$ (p, n) $ studies, while qualitatively in agreement with our previous ISOLDE work on $^{37}$Ca $\\beta^{+} $ -decay, show quantitative discrepancies that appear to grow as the excitation energy in the residual nuclei increases. Because of the bulk of the GT strengh appears at these high excitation energies, it is important to extend the $\\beta$-decay data to even higher excitation energies where, because of rapidly diminishing phase-space, strong GT transitions correspond to very weak $\\beta$ -branches. We propose to do...

Effects of exercise improves muscle strength and fat mass in patients with high fracture risk: A randomized control trial.

Science.gov (United States)

Chan, Ding-Cheng; Chang, Chirn-Bin; Han, Der-Sheng; Hong, Cian-Hui; Hwang, Jawl-Shan; Tsai, Keh-Sung; Yang, Rong-Sen

2017-10-26

The deterioration of the musculoskeletal system imposes significant impact on physical activity. Exercise is an important strategy which minimizes these changes. It is not clear which type of exercise provides better improvement on low physical performance, low muscle mass and low strength of sarcopenia. We aim to develop an integrated care (IC) model and compare its relative efficacy in limb fat free mass, muscle strength, and physical performance with low extremities exercise (LEE) in community dwelling older adults with high risk of fractures (Fracture Risk Assessment Tool (FRAX ® )) ≧3% for hip fracture, ≧20% for major osteoporotic fracture or 1-min osteoporosis risk test (≧1 point) or fall (≧2 falls in previous year). Patients were assigned randomized to participate in either IC or LEE group (n = 55 each) for 3 months. All participants received education including home-based exercise. The IC group consisted of different modalities of exercise while the LEE group performed machine-based low extremities exercise. Fat free mass, muscle strength, and physical performance were measured at their baseline and 3-months follow-up. Mean age was 73.8 ± 7 years with 69.1% women. Entire cohort demonstrated significant increment in fat free mass, muscle strength (4 indicators) and physical performance (3 indicators). However, between group differences were not significant. With regular supervise exercise; both groups are equally effective in decreasing fat mass and increasing physical performance, muscle mass and strength. However, the IC group required fewer resources and thus more financially feasible in a community setting. Copyright © 2017. Published by Elsevier B.V.

The Strengths of Poor Families. Research Brief. Publication #2009-26

Science.gov (United States)

Valladares, Sherylls; Moore, Kristin Anderson

2009-01-01

In the minds of many people, poor families equal problem families. Indeed, that perception is not surprising, giving compelling evidence of the harsh effects that poverty can have on family life and child well-being. However, far less attention has been paid to the strengths that many poor families have and the characteristics that they may share…

ZERODUR: deterministic approach for strength design

Science.gov (United States)

Hartmann, Peter

2012-12-01

There is an increasing request for zero expansion glass ceramic ZERODUR substrates being capable of enduring higher operational static loads or accelerations. The integrity of structures such as optical or mechanical elements for satellites surviving rocket launches, filigree lightweight mirrors, wobbling mirrors, and reticle and wafer stages in microlithography must be guaranteed with low failure probability. Their design requires statistically relevant strength data. The traditional approach using the statistical two-parameter Weibull distribution suffered from two problems. The data sets were too small to obtain distribution parameters with sufficient accuracy and also too small to decide on the validity of the model. This holds especially for the low failure probability levels that are required for reliable applications. Extrapolation to 0.1% failure probability and below led to design strengths so low that higher load applications seemed to be not feasible. New data have been collected with numbers per set large enough to enable tests on the applicability of the three-parameter Weibull distribution. This distribution revealed to provide much better fitting of the data. Moreover it delivers a lower threshold value, which means a minimum value for breakage stress, allowing of removing statistical uncertainty by introducing a deterministic method to calculate design strength. Considerations taken from the theory of fracture mechanics as have been proven to be reliable with proof test qualifications of delicate structures made from brittle materials enable including fatigue due to stress corrosion in a straight forward way. With the formulae derived, either lifetime can be calculated from given stress or allowable stress from minimum required lifetime. The data, distributions, and design strength calculations for several practically relevant surface conditions of ZERODUR are given. The values obtained are significantly higher than those resulting from the two

Are the force characteristics of synchronous handcycling affected by speed and the method to impose power?

NARCIS (Netherlands)

Arnet, U.; van Drongelen, S.V.; van der Woude, L.H.V.; Veeger, H.E.J.

2012-01-01

Objective: To investigate the influence of exercise conditions (speed and method to impose power) on the applied force, force effectiveness and distribution of work during handcycling. Method: Ten able-bodied men performed handcycling on a treadmill. To test the effect of speed, subjects propelled

Are the force characteristics of synchronous handcycling affected by speed and the method to impose power?

NARCIS (Netherlands)

Arnet, Ursina; van Drongelen, Stefan; Veeger, DirkJan H. E. J.; van der Woude, Lucas H. V.

Objective: To investigate the influence of exercise conditions (speed and method to impose power) on the applied force, force effectiveness and distribution of work during handcycling. Method: Ten able-bodied men performed handcycling on a treadmill. To test the effect of speed, subjects propelled

Spectral results for mixed problems and fractional elliptic operators,

DEFF Research Database (Denmark)

Grubb, Gerd

2015-01-01

In the first part of the paper we show Weyl type spectral asymptotic formulas for pseudodifferential operators P a of order 2a, with type and factorization index a  ∈ R +, restricted to compact sets with boundary; this includes fractional powers of the Laplace operator. The domain...... and the regularity of eigenfunctions is described. In the second part, we apply this in a study of realizations A χ,Σ+ in L 2( Ω ) of mixed problems for a second-order strongly elliptic symmetric differential operator A on a bounded smooth set Ω ⊂ R n; here the boundary ∂Ω=Σ is partioned smoothly into Σ......=Σ_∪Σ+, the Dirichlet condition γ0u=0 is imposed on Σ_, and a Neumann or Robin condition χu=0 is imposed on Σ+. It is shown that the Dirichlet-to-Neumann operator Pγ,χ is principally of type 1/2 with factorization index 1/2, relative to Σ+. The above theory allows a detailed description of D (Aχ,Σ_+) with singular...

Compressive and flexural strength of high strength phase change mortar

Science.gov (United States)

Qiao, Qingyao; Fang, Changle

2018-04-01

High-strength cement produces a lot of hydration heat when hydrated, it will usually lead to thermal cracks. Phase change materials (PCM) are very potential thermal storage materials. Utilize PCM can help reduce the hydration heat. Research shows that apply suitable amount of PCM has a significant effect on improving the compressive strength of cement mortar, and can also improve the flexural strength to some extent.

The problem of suffering as a driving force of rationalization and social change.

Science.gov (United States)

Wilkinson, Iain

2013-03-01

This article documents and analyses a reconstructed Weberian conception of the problem of suffering. In this setting a focus is brought to how the problem of suffering is constituted in the dynamic interplay between, on the one hand, the compulsion to impose rational sense and order on the world, and on the other, the necessity to find a means to satiate charismatic needs. The discussion highlights Weber's account of the tendency for problems of suffering to increase in volume and scale along with the intensification and spread of modern processes of rationalization. It offers a case for the development of further sociological inquiries into the role played by experiences of the problem of suffering within the dynamics of social and cultural change. © London School of Economics and Political Science 2013.

Strength versus temperature anomalies in metals

CERN Document Server

Fisher, D J

2015-01-01

Perhaps the best-known aspect of the behavior of metals, and indeed of most materials, is that they weaken with temperature. This weakening is however a problem in some applications. Only tungsten for instance, with its naturally high melting-point, was suitable for the manufacture of the filaments of incandescent light-bulbs. Even then, it was necessary to add oxide particles having a yethigher melting-point in order to prevent the weakening effect of grain-growth. These are alloys however which can be said to be weakened by heat, but nevertheless 'hang on' to enough strength to perform their

Unit-Sphere Multiaxial Stochastic-Strength Model Applied to Anisotropic and Composite Materials

Science.gov (United States)

Nemeth, Noel, N.

2013-01-01

Models that predict the failure probability of brittle materials under multiaxial loading have been developed by authors such as Batdorf, Evans, and Matsuo. These "unit-sphere" models assume that the strength-controlling flaws are randomly oriented, noninteracting planar microcracks of specified geometry but of variable size. This methodology has been extended to predict the multiaxial strength response of transversely isotropic brittle materials, including polymer matrix composites (PMCs), by considering (1) flaw-orientation anisotropy, whereby a preexisting microcrack has a higher likelihood of being oriented in one direction over another direction, and (2) critical strength, or K (sub Ic) orientation anisotropy, whereby the level of critical strength or fracture toughness for mode I crack propagation, K (sub Ic), changes with regard to the orientation of the microstructure. In this report, results from finite element analysis of a fiber-reinforced-matrix unit cell were used with the unit-sphere model to predict the biaxial strength response of a unidirectional PMC previously reported from the World-Wide Failure Exercise. Results for nuclear-grade graphite materials under biaxial loading are also shown for comparison. This effort was successful in predicting the multiaxial strength response for the chosen problems. Findings regarding stress-state interactions and failure modes also are provided.

Fragmentation of single-particle strength and the validity of the shell model

International Nuclear Information System (INIS)

Brand, M.G.E.; Rijsdijk, G.A.; Muller, F.A.; Allaart, K.; Dickhoff, W.H.

1991-01-01

The problem of missing spectroscopic strength in proton knock-out reactions is addressed by calculating this strength with a realistic interaction up to about a hundred MeV missing energy. An interaction suitably modified for short-range correlations (G-matrix) is employed in the calculation of the self-energy including all orbitals up to and including three major shells above the Fermi level for protons. The spectroscopic strength is obtained by solving the Dyson equation for the Green function with a self-energy up to second order in the interaction. Results for 48 Ca and 90 Zr are compared with recent (e,e'p) data. The calculated strength overestimates the data by about 10-15% of the independent particle shell-model (IPSM) sum rule. This is in accordance with what is expected from depletions calculated in infinite nuclear matter. Inclusion of higher order terms into the self-energy, especially the correlated motion of particles and holes, is found to be necessary to reproduce the observed fragmentation of strength in the low-energy region. The widths of the strength distributions compare well with empirical formulas which have been deduced from optical potentials. The validity of the conventional shell-model picture is connected with the relevance of Landau's quasiparticle picture for strongly interacting Fermi systems. (orig.)

Lithospheric Strength and Stress State: Persistent Challenges and New Directions in Geodynamics

Science.gov (United States)

Hirth, G.

2017-12-01

The strength of the lithosphere controls a broad array of geodynamic processes ranging from earthquakes, the formation and evolution of plate boundaries and the thermal evolution of the planet. A combination of laboratory, geologic and geophysical observations provides several independent constraints on the rheological properties of the lithosphere. However, several persistent challenges remain in the interpretation of these data. Problems related to extrapolation in both scale and time (rate) need to be addressed to apply laboratory data. Nonetheless, good agreement between extrapolation of flow laws and the interpretation of microstructures in viscously deformed lithospheric mantle rocks demonstrates a strong foundation to build on to explore the role of scale. Furthermore, agreement between the depth distribution of earthquakes and predictions based on extrapolation of high temperature friction relationships provides a basis to understand links between brittle deformation and stress state. In contrast, problems remain for rationalizing larger scale geodynamic processes with these same rheological constraints. For example, at face value the lab derived values for the activation energy for creep are too large to explain convective instabilities at the base of the lithosphere, but too low to explain the persistence of dangling slabs in the upper mantle. In this presentation, I will outline these problems (and successes) and provide thoughts on where new progress can be made to resolve remaining inconsistencies, including discussion of the role of the distribution of volatiles and alteration on the strength of the lithosphere, new data on the influence of pressure on friction and fracture strength, and links between the location of earthquakes, thermal structure, and stress state.

Validation by numerical simulation of the behaviour of protective structures of machinery cabins subjected to standardized shocks

Science.gov (United States)

Dumitrache, P.; Goanţă, A. M.

2017-08-01

The ability of the cabins to insure the operator protection in the case of the shock loading that appears at the roll-over of the machine or when the cab is struck by the falling objects, it’s one of the most important performance criterions that it must comply by the machines and the mobile equipments. The experimental method provides the most accurate information on the behaviour of protective structures, but generates high costs due to experimental installations and structures which may be compromised during the experiments. In these circumstances, numerical simulation of the actual problem (mechanical shock applied to a strength structure) is a perfectly viable alternative, given that the hardware and software current performances provides the necessary support to obtain results with an acceptable level of accuracy. In this context, the paper proposes using FEA platforms for virtual testing of the actual strength structures of the cabins using their finite element models based on 3D models generated in CAD environments. In addition to the economic advantage above mentioned, although the results obtained by simulation using the finite element method are affected by a number of simplifying assumptions, the adequate modelling of the phenomenon can be a successful support in the design process of structures to meet safety performance criteria imposed by current standards. In the first section of the paper is presented the general context of the security performance requirements imposed by current standards on the cabins strength structures. The following section of the paper is dedicated to the peculiarities of finite element modelling in problems that impose simulation of the behaviour of structures subjected to shock loading. The final section of the paper is dedicated to a case study and to the future objectives.

Teacher Ratings of Children's Behavior Problems and Functional Impairment Across Gender and Ethnicity : Construct Equivalence of the Strengths and Difficulties Questionnaire

NARCIS (Netherlands)

Zwirs, Barbara; Burger, Huibert; Schulpen, Tom; Vermulst, A. A.; HiraSing, R. A.; Buitelaar, Jan

The present study examined construct equivalence of the teacher Strengths and Difficulties Questionnaire and compared mean scores in an ethnically diverse sample of children living in the Netherlands. Elementary schoolteachers completed the Strengths and Difficulties Questionnaire for 2,185 children

Teacher ratings of children's behavior problems and functional impairment across gender and ethnicity: construct equivalence of the strengths and difficulties questionnaire

NARCIS (Netherlands)

Zwirs, B.; Burger, H.; Schulpen, T.; Vermulst, A.A.; Hira Sing, R.A.; Buitelaar, J.

2011-01-01

The present study examined construct equivalence of the teacher Strengths and Difficulties Questionnaire and compared mean scores in an ethnically diverse sample of children living in the Netherlands. Elementary schoolteachers completed the Strengths and Difficulties Questionnaire for 2,185 children

INFLUENCE OF STRENGTH TRAINING PROGRAM ON ISOMETRIC MUSCLE STRENGTH IN YOUNG ATHLETES

Directory of Open Access Journals (Sweden)

Dragan Radovanovic

2007-10-01

Full Text Available Strength training, or resistance training, is a form of physical conditioning used to increase the ability to resist force. Since muscular strength is required for success in many sports, it is logical to assume that stronger and more powerful young athletes will achieve better results. The aim of the study was to examine the effects of strength training on young athletes. An eight-week strength training program for developing muscle strength was performed in this study. Training protocol was designed specifically for young adolescent’s athletes. The program consisted of exercises for lower and upper body, abdominal and lower back muscles. The programs did not involve the maximal (1-3 repetitions maximum and other very hard intensity exercises that may had negative effect on young athletes. The results showed that strength training program had positive effects on maximal isometric muscle force (Fmax and motor skill. The increase presents the combined influence of strength training and growth.

The ICMJE Recommendations and pharmaceutical marketing--strengths, weaknesses and the unsolved problem of attribution in publication ethics.

Science.gov (United States)

Matheson, Alastair

2016-04-04

The International Committee of Medical Journal Editors (ICMJE) Recommendations set ethical and editorial standards for article publication in most leading medical journals. Here, I examine the strengths and weaknesses of the Recommendations in the prevention of commercial bias in industry-financed journal literature, on three levels - scholarly discourse, article content, and article attribution. With respect to overall discourse, the most important measures in the ICMJE Recommendations are for enforcing clinical trial registration and controlling duplicate publication. With respect to article content, the ICMJE promotes stringent author accountability and adherence to established reporting standards. However, the ICMJE accepts the use of commercial editorial teams to produce manuscripts, which is a potential source of bias, and accepts private company ownership and analysis of clinical trial data. New ICMJE guidance on data sharing will address but not eliminate problems of commercial data access. With respect to attribution, the Recommendations oppose guest authorship and encourage clear documentation of author contributions. However, they exclude writers from coauthorship; provide no specific advice on the attribution of commercial literature, for instance with respect to company authorship, author sequence or prominent commercial labeling; and endorse the use of fine print and euphemism. The ICMJE requires detailed author interest disclosures, but overlooks the interests of non-authors and companies, and does not recommend that interests most salient to the publication are highlighted. Together, these weaknesses facilitate "advocacy"-based marketing, in which literature planned, financed and produced by companies is fronted by academics, enabling commercial messages to be presented to customers by their respected clinical peers rather than companies themselves. The ICMJE Recommendations set important research and reporting standards, without which commercial

Probability problems in seismic risk analysis and load combinations for nuclear power plants

International Nuclear Information System (INIS)

George, L.L.

1983-01-01

This workshop describes some probability problems in power plant reliability and maintenance analysis. The problems are seismic risk analysis, loss of load probability, load combinations, and load sharing. The seismic risk problem is to compute power plant reliability given an earthquake and the resulting risk. Component survival occurs if its peak random response to the earthquake does not exceed its strength. Power plant survival is a complicated Boolean function of component failures and survivals. The responses and strengths of components are dependent random processes, and the peak responses are maxima of random processes. The resulting risk is the expected cost of power plant failure

42 CFR 411.12 - Charges imposed by an immediate relative or member of the beneficiary's household.

Science.gov (United States)

2010-10-01

...) Natural or adoptive parent, child, or sibling. (3) Stepparent, stepchild, stepbrother, or stepsister. (4... if the physician who ordered or supervised the services has an excluded relationship to the... provider or supplier if the owner has an excluded relationship to the beneficiary; and (ii) Charges imposed...

Evaluation and field verification of strength and structural improvement of chemically stabilized subgrade soil.

Science.gov (United States)

2008-07-01

Often subgrade soils exhibit properties, particularly strength and/or volume change properties that limit their performance as a support element for pavements. : Typical problems include shrink-swell, settlement, collapse, erosion or simply insuffici...

Give Me Strength.

Institute of Scientific and Technical Information of China (English)

维拉

1996-01-01

Mort had an absolutely terrible day at the office.Everythingthat could go wrong did go wrong.As he walked home he could beheard muttering strange words to himself:“Oh,give me strength,give me strength.”Mort isn’t asking for the kind of strength thatbuilds strong muscles:he’s asking for the courage or ability to

Design optimization of continuous partially prestressed concrete beams

Science.gov (United States)

Al-Gahtani, A. S.; Al-Saadoun, S. S.; Abul-Feilat, E. A.

1995-04-01

An effective formulation for optimum design of two-span continuous partially prestressed concrete beams is described in this paper. Variable prestressing forces along the tendon profile, which may be jacked from one end or both ends with flexibility in the overlapping range and location, and the induced secondary effects are considered. The imposed constraints are on flexural stresses, ultimate flexural strength, cracking moment, ultimate shear strength, reinforcement limits cross-section dimensions, and cable profile geometries. These constraints are formulated in accordance with ACI (American Concrete Institute) code provisions. The capabilities of the program to solve several engineering problems are presented.

Market microstructure matters when imposing a Tobin tax—Evidence from the lab☆

Science.gov (United States)

Kirchler, Michael; Huber, Jürgen; Kleinlercher, Daniel

2011-01-01

Trading in FX markets is dominated by two microstructures: exchanges with market makers and OTC-markets without market makers. Using laboratory experiments we test whether the impact of a Tobin tax is different in these two market microstructures. We find that (i) in markets without market makers an unilaterally imposed Tobin tax (i.e. a tax haven exists) increases volatility. (ii) In contrast, in markets with market makers we observe a decrease in volatility in unilaterally taxed markets. (iii) An encompassing Tobin tax has no impact on volatility in either setting. Efficiency does not vary significantly across tax regimes. PMID:22210970

Market microstructure matters when imposing a Tobin tax-Evidence from the lab.

Science.gov (United States)

Kirchler, Michael; Huber, Jürgen; Kleinlercher, Daniel

2011-12-01

TRADING IN FX MARKETS IS DOMINATED BY TWO MICROSTRUCTURES: exchanges with market makers and OTC-markets without market makers. Using laboratory experiments we test whether the impact of a Tobin tax is different in these two market microstructures. We find that (i) in markets without market makers an unilaterally imposed Tobin tax (i.e. a tax haven exists) increases volatility. (ii) In contrast, in markets with market makers we observe a decrease in volatility in unilaterally taxed markets. (iii) An encompassing Tobin tax has no impact on volatility in either setting. Efficiency does not vary significantly across tax regimes.

Sleep Does Not Promote Solving Classical Insight Problems and Magic Tricks

Science.gov (United States)

Schönauer, Monika; Brodt, Svenja; Pöhlchen, Dorothee; Breßmer, Anja; Danek, Amory H.; Gais, Steffen

2018-01-01

During creative problem solving, initial solution attempts often fail because of self-imposed constraints that prevent us from thinking out of the box. In order to solve a problem successfully, the problem representation has to be restructured by combining elements of available knowledge in novel and creative ways. It has been suggested that sleep supports the reorganization of memory representations, ultimately aiding problem solving. In this study, we systematically tested the effect of sleep and time on problem solving, using classical insight tasks and magic tricks. Solving these tasks explicitly requires a restructuring of the problem representation and may be accompanied by a subjective feeling of insight. In two sessions, 77 participants had to solve classical insight problems and magic tricks. The two sessions either occurred consecutively or were spaced 3 h apart, with the time in between spent either sleeping or awake. We found that sleep affected neither general solution rates nor the number of solutions accompanied by sudden subjective insight. Our study thus adds to accumulating evidence that sleep does not provide an environment that facilitates the qualitative restructuring of memory representations and enables problem solving. PMID:29535620

Athletes' perceptions of anti-doping sanctions: the ban from sport versus social, financial and self-imposed sanctions

DEFF Research Database (Denmark)

Overbye, Marie Birch; Elbe, Anne-Marie; Knudsen, Mette Lykke

2015-01-01

Today the main doping deterrence strategy is to ban athletes from sport if caught. This study examines whether Danish elite athletes perceive the ban as a deterrent and how they evaluate social, self-imposed and financial sanctions compared with the ban. Questionnaires were emailed to elite...... athletes from 40 sports (N = 645; response rate, 43%). Results showed that 78% of athletes regarded the ban as a deterrent. Older male athletes, however, did so to a lesser degree. Seventy-seven per cent, regardless of gender, age, sport type and previous experience of doping testing, viewed social...... sanctions as a greater deterrent than the ban. Many also considered self-imposed sanctions (54%) and financial consequences (47%) a greater deterrent. Four per cent considered neither the ban nor the presented alternatives a deterrent. The findings indicate that the ban from sport deters doping...

The Association between Maximal Bench Press Strength and Isometric Handgrip Strength among Breast Cancer Survivors

Science.gov (United States)

Rogers, Benjamin H.; Brown, Justin C.; Gater, David R.; Schmitz, Kathryn H.

2016-01-01

Objective One-repetition maximum (1-RM) bench press strength is considered the gold standard to quantify upper-body muscular strength. Isometric handgrip strength is frequently used as a surrogate for 1-RM bench press strength among breast cancer (BrCa) survivors. The relationship between 1-RM bench press strength and isometric handgrip strength, however, has not been characterized among BrCa survivors. Design Cross-sectional study. Setting Laboratory. Participants Community-dwelling BrCa survivors. Interventions Not applicable. Main Outcome Measure 1-RM bench press strength was measured with a barbell and exercise bench. Isometric handgrip strength was measured using an isometric dynamometer with three maximal contractions of left and right hands. All measures were conducted by staff with training in clinical exercise testing. Results Among 295 BrCa survivors, 1-RM bench press strength was 18.2±6.1 kg (range: 2.2-43.0) and isometric handgrip strength was 23.5±5.8 kg (range: 9.0-43.0). The strongest correlate of 1-RM bench press strength was the average isometric handgrip strength of both hands (r=0.399; Pisometric handgrip strength of both hands overestimated 1-RM bench press strength by 4.7 kg (95% limits of agreement: −8.2 to 17.6). In a multivariable linear regression model, the average isometric handgrip strength of both hands (β=0.31; Pstrength (R2=0.23). Conclusions Isometric handgrip strength is a poor surrogate for 1-RM bench press strength among BrCa survivors. 1-RM bench press and isometric handgrip strength quantify distinct components of muscular strength. PMID:27543047

Reactive Strength Index: A Poor Indicator of Reactive Strength?

Science.gov (United States)

Healy, Robin; Kenny, Ian; Harrison, Drew

2017-11-28

The primary aim was to assess the relationships between reactive strength measures and associated kinematic and kinetic performance variables achieved during drop jumps. A secondary aim was to highlight issues with the use of reactive strength measures as performance indicators. Twenty eight national and international level sprinters, consisting of fourteen men and women, participated in this cross-sectional analysis. Athletes performed drop jumps from a 0.3 m box onto a force platform with dependent variables contact time (CT), landing time (TLand), push-off time (TPush), flight time (FT), jump height (JH), reactive strength index (RSI, calculated as JH / CT), reactive strength ratio (RSR, calculated as FT / CT) and vertical leg spring stiffness (Kvert) recorded. Pearson's correlation test found very high to near perfect relationships between RSI and RSR (r = 0.91 to 0.97), with mixed relationships found between RSI, RSR and the key performance variables, (Men: r = -0.86 to -0.71 between RSI/RSR and CT, r = 0.80 to 0.92 between RSI/RSR and JH; Women: r = -0.85 to -0.56 between RSR and CT, r = 0.71 between RSI and JH). This study demonstrates that the method of assessing reactive strength (RSI versus RSR) may be influenced by the performance strategies adopted i.e. whether an athlete achieves their best reactive strength scores via low CTs, high JHs or a combination. Coaches are advised to limit the variability in performance strategies by implementing upper and / or lower CT thresholds to accurately compare performances between individuals.

Increasing Lean Mass and Strength: A Comparison of High Frequency Strength Training to Lower Frequency Strength Training.

Science.gov (United States)

Thomas, Michael H; Burns, Steve P

The purpose of this study was to determine the effect strength training frequency has on improvements in lean mass and strength. Participants were 7 women and 12 men, age ( χ̄ = 34.64 years ± 6.91 years), with strength training experience, training age ( χ̄ = 51.16 months ± 39.02 months). Participants were assigned to one of two groups to equal baseline group demographics. High frequency training group (HFT) trained each muscle group as the agonist, 3 times per week, exercising with 3 sets per muscle group per session (3 total body workouts). Low frequency training group (LFT) trained each muscle group as the agonist one time per week, completing all 9 sets during that one workout. LFT consisted of a routine split over three days: 1) pectoralis, deltoids, and triceps; 2) upper back and biceps; 3) quadriceps, hamstrings, calves, and abdominals. Following eight weeks of training, HFT increased lean mass by 1.06 kg ± 1.78 kg, (1.9%), and LFT increased lean mass by .99 kg ± 1.31 kg, (2.0%). HFT strength improvements on the chest press was 9.07 kg ± 6.33 kg, (11%), and hack squat 20.16 kg ± 11.59 kg, (21%). LFT strength improvements on chest press was 5.80kg ± 4.26 kg, (7.0%), and hack squat 21.83 kg ± 11.17 kg, (24 %). No mean differences between groups were significant. These results suggest that HFT and LFT of equal set totals result in similar improvements in lean mass and strength, following 8 weeks of strength training.

Propulsion efficiency and imposed flow fields of a copepod jump

DEFF Research Database (Denmark)

Jiang, H.; Kiørboe, Thomas

2011-01-01

Pelagic copepods jump to relocate, to attack prey and to escape predators. However, there is a price to be paid for these jumps in terms of their energy costs and the hydrodynamic signals they generate to rheotactic predators. Using observed kinematics of various types of jumps, we computed...... the imposed flow fields and associated energetics of jumps by means of computational fluid dynamics simulations by modeling the copepod as a self-propelled body. The computational fluid dynamics simulation was validated by particle image velocimetry data. The flow field generated by a repositioning jump...... the flow structure. The flow field associated with an escape jump sequence also includes two dominant vortex structures: one leading wake vortex generated as a result of the first jump and one around the body, but between these two vortex structures is an elongated, long-lasting flow trail with flow...

A critical role of nucleus accumbens dopamine D1-family receptors in renewal of alcohol seeking after punishment-imposed abstinence.

Science.gov (United States)

Marchant, Nathan J; Kaganovsky, Konstantin

2015-06-01

In humans, places or contexts previously associated with alcohol use often provoke relapse during abstinence. This phenomenon is modeled in laboratory animals using the ABA renewal procedure, in which extinction training in context (B) suppresses alcohol seeking, and renewal of this seeking occurs when the animal returns to the original training context (A). However, extinction training does not adequately capture the motivation for abstinence in human alcoholics who typically self-initiate abstinence in response to the negative consequences of excessive use. We recently developed a procedure to study renewal in laboratory rats after abstinence imposed by negative consequences (footshock punishment). The mechanisms of renewal of punished alcohol seeking are largely unknown. Here, we used the D1-family receptor antagonist SCH 23390 to examine the role of nucleus accumbens (NAc) shell and core dopamine in renewal of alcohol seeking after punishment-imposed abstinence. We trained alcohol-preferring "P rats" to self-administer 20% alcohol in Context A and subsequently suppressed alcohol taking via response-contingent footshock punishment in Context B. We tested the effects of systemic, NAc shell, or NAc core injections of SCH 23390 on renewal of alcohol seeking after punishment-imposed abstinence. We found that both systemic and NAc shell and core injections of SCH 23390 decreased renewal of punished alcohol seeking. Our results demonstrate a critical role of NAc dopamine in renewal of alcohol seeking after punishment-imposed abstinence. We discuss these results in reference to the brain mechanisms of renewal of alcohol seeking after extinction versus punishment. (c) 2015 APA, all rights reserved).

Strength and voluntary activation in relation to functioning in patients with osteoarthritis.

NARCIS (Netherlands)

Dr. D.M. van Leeuwen

2013-01-01

Osteoarthritis (OA) is characterized by pain, and problems with activities of daily life, especially if the hip or knee joint is affected. The aim of this project was to study associations between strength, voluntary activation and physical functioning in elderly patients with OA. People with OA of

Consequences of acid strength for isomerization and elimination catalysis on solid acids.

Science.gov (United States)

Macht, Josef; Carr, Robert T; Iglesia, Enrique

2009-05-13

cations at their transition states. These compensating effects from electrostatic stabilization depend on how similar the charge density in these organic cations is to that in the proton removed. Cations with more localized charge favor strong electrostatic interactions with anions and form more stable ionic structures than do cations with more diffuse charges. Ion-pairs at elimination transition states contain cations with higher local charge density at the sp(2) carbon than for isomerization transition states; as a result, these ion-pairs recover a larger fraction of the deprotonation energy, and, consequently, their reactions become less sensitive to acid strength. These concepts lead us to conclude that the energetic difficulty of a catalytic reaction, imposed by gas-phase reactant proton affinities in transition state analogues, does not determine its sensitivity to the acid strength of solid catalysts.

Location-routing Problem with Fuzzy time windows and Traffic time

Directory of Open Access Journals (Sweden)

Shima Teimoori

2014-05-01

Full Text Available The location-routing problem is a relatively new branch of logistics system. Its objective is to determine a suitable location for constructing distribution warehouses and proper transportation routing from warehouse to the customer. In this study, the location-routing problem is investigated with considering fuzzy servicing time window for each customer. Another important issue in this regard is the existence of congested times during the service time and distributing goods to the customer. This caused a delay in providing service for customer and imposed additional costs to distribution system. Thus we have provided a mathematical model for designing optimal distributing system. Since the vehicle location-routing problem is Np-hard, thus a solution method using genetic meta-heuristic algorithm was developed and the optimal sequence of servicing for the vehicle and optimal location for the warehouses were determined through an example.

Improving stability and strength characteristics of framed structures with nonlinear behavior

Science.gov (United States)

Pezeshk, Shahram

1990-01-01

In this paper an optimal design procedure is introduced to improve the overall performance of nonlinear framed structures. The design methodology presented here is a multiple-objective optimization procedure whose objective functions involve the buckling eigenvalues and eigenvectors of the structure. A constant volume with bounds on the design variables is used in conjunction with an optimality criterion approach. The method provides a general tool for solving complex design problems and generally leads to structures with better limit strength and stability. Many algorithms have been developed to improve the limit strength of structures. In most applications geometrically linear analysis is employed with the consequence that overall strength of the design is overestimated. Directly optimizing the limit load of the structure would require a full nonlinear analysis at each iteration which would be prohibitively expensive. The objective of this paper is to develop an algorithm that can improve the limit-load of geometrically nonlinear framed structures while avoiding the nonlinear analysis. One of the novelties of the new design methodology is its ability to efficiently model and design structures under multiple loading conditions. These loading conditions can be different factored loads or any kind of loads that can be applied to the structure simultaneously or independently. Attention is focused on optimal design of space framed structures. Three-dimensional design problems are more complicated to carry out, but they yield insight into real behavior of the structure and can help avoiding some of the problems that might appear in planar design procedure such as the need for out-of-plane buckling constraint. Although researchers in the field of structural engineering generally agree that optimum design of three-dimension building frames especially in the seismic regions would be beneficial, methods have been slow to emerge. Most of the research in this area has dealt

High-Tensile Strength Tape Versus High-Tensile Strength Suture: A Biomechanical Study.

Science.gov (United States)

Gnandt, Ryan J; Smith, Jennifer L; Nguyen-Ta, Kim; McDonald, Lucas; LeClere, Lance E

2016-02-01

To determine which suture design, high-tensile strength tape or high-tensile strength suture, performed better at securing human tissue across 4 selected suture techniques commonly used in tendinous repair, by comparing the total load at failure measured during a fixed-rate longitudinal single load to failure using a biomechanical testing machine. Matched sets of tendon specimens with bony attachments were dissected from 15 human cadaveric lower extremities in a manner allowing for direct comparison testing. With the use of selected techniques (simple Mason-Allen in the patellar tendon specimens, whip stitch in the quadriceps tendon specimens, and Krackow stitch in the Achilles tendon specimens), 1 sample of each set was sutured with a 2-mm braided, nonabsorbable, high-tensile strength tape and the other with a No. 2 braided, nonabsorbable, high-tensile strength suture. A total of 120 specimens were tested. Each model was loaded to failure at a fixed longitudinal traction rate of 100 mm/min. The maximum load and failure method were recorded. In the whip stitch and the Krackow-stitch models, the high-tensile strength tape had a significantly greater mean load at failure with a difference of 181 N (P = .001) and 94 N (P = .015) respectively. No significant difference was found in the Mason-Allen and simple stitch models. Pull-through remained the most common method of failure at an overall rate of 56.7% (suture = 55%; tape = 58.3%). In biomechanical testing during a single load to failure, high-tensile strength tape performs more favorably than high-tensile strength suture, with a greater mean load to failure, in both the whip- and Krackow-stitch models. Although suture pull-through remains the most common method of failure, high-tensile strength tape requires a significantly greater load to pull-through in a whip-stitch and Krakow-stitch model. The biomechanical data obtained in the current study indicates that high-tensile strength tape may provide better repair

Evaluation and Study the Effect of Additives and Other Factors on Tensile Strength of Asphalt Paving Mixtures

Directory of Open Access Journals (Sweden)

Hanaa Khaleel A. Al-Baiti

2012-03-01

Full Text Available The resistance of asphaltic concrete to cracking is dependent upon its tensile strength and flexibility characteristics. Also the low tensile strength has recognized as a major contributor to other performance problems. The fatigue life of mixtures decreases exponentially with decreasing of tensile strength. This trend is justified by the loss in stiffness and thereby initiating cracks and stripping. The main objective of this research is intended to study the effect of different variables related with the used materials and the external conditions on the tensile strength and predict a model of indirect tensile strength in asphalt concrete paving materials under the local prevailing conditions and investigate the effect of percent of additives of (Polyestrene resins and Hydrated Lime to enhance the resistance ability of asphalt concrete mixture against distresses. The main affected factors; soaking, asphalt content, compaction, aggregate maximum size and temperature, influence on the indirect tensile strength and presented through a statistics analysis model for tensile strength in asphalt mixture

Long-term outcome of muscle strength in ulnar and median nerve injury: Comparing manual muscle strength testing, grip and pinch strength dynamometers and a new intrinsic muscle strength dynamometer

NARCIS (Netherlands)

A.R. Schreuders (Ton); M.E. Roebroeck (Marij); J.B. Jaquet (Jean); S.E.R. Hovius (Steven); H.J. Stam (Henk)

2004-01-01

textabstractObjective: To compare the outcome of muscle strength with manual muscle strength testing grip and pinch strength measurements and a dynamometer which allows for measurements of the intrinsic muscles of the hand in isolation (the Rotterdam Intrinsic Hand Myometer, RIHM). Methods:

Control of inhomogeneous materials strength by method of acoustic emission

Directory of Open Access Journals (Sweden)

В. В. Носов

2017-08-01

Full Text Available The ambiguous connection between the results of acoustic emission control and the strength of materials makes acoustic-emission diagnosis ineffective and actualizes the problem of strength and metrological heterogeneity. Inhomogeneity is some deviation from a certain norm. The real object is always heterogeneous, homogeneity is an assumption that simplifies the image of the object and the solution of the tasks associated with it. The need to consider heterogeneity is due to the need to clarify a particular task and is a transition to a more complex level of research. Accounting for heterogeneity requires the definition of its type, criterion and method of evaluation. The type of heterogeneity depends on the problem being solved and should be related to the property that determines the function of the real object, the criterion should be informative, and the way of its evaluation is non-destructive. The complexity of predicting the behavior of heterogeneous materials necessitates the modeling of the destructive process that determines the operability, the formulation of the inhomogeneity criterion, the interpretation of the Kaiser effect, as showing inhomogeneity of the phenomenon of non-reproduction of acoustic emission (AE activity upon repeated loading of the examined object.The article gives an example of modeling strength and metrological heterogeneity, analyzes and estimates the informative effect of the Kaiser effect on the danger degree of state of diagnosed object from the positions of the micromechanical model of time dependencies of AE parameters recorded during loading of structural materials and technical objects.

Weak unique continuation property and a related inverse source problem for time-fractional diffusion-advection equations

Science.gov (United States)

Jiang, Daijun; Li, Zhiyuan; Liu, Yikan; Yamamoto, Masahiro

2017-05-01

In this paper, we first establish a weak unique continuation property for time-fractional diffusion-advection equations. The proof is mainly based on the Laplace transform and the unique continuation properties for elliptic and parabolic equations. The result is weaker than its parabolic counterpart in the sense that we additionally impose the homogeneous boundary condition. As a direct application, we prove the uniqueness for an inverse problem on determining the spatial component in the source term by interior measurements. Numerically, we reformulate our inverse source problem as an optimization problem, and propose an iterative thresholding algorithm. Finally, several numerical experiments are presented to show the accuracy and efficiency of the algorithm.

Evaluation of workability and strength of green concrete using waste steel scrap

Science.gov (United States)

Neeraja, D.; Arshad, Shaik Mohammed; Nawaz Nadaf, Alisha K.; Reddy, Mani Kumar

2017-11-01

This project works on the study of workability and mechanical properties of concrete using waste steel scrap from the lathe industry. Lathe industries produce waste steel scrap from the lathe machines. In this study, an attempt is made to use this waste in concrete, as accumulation of waste steel scrap cause disposal problem. Tests like compressive test, split tensile test, NDT test (UPV test) were conducted to determine the impact of steel scrap in concrete. The percentages of steel scrap considered in the study were 0%, 0.5%, 1%, 1.5%, and 2% respectively by volume of concrete, 7 day, 28 days test were conducted to find out strength of steel scrap concrete. It is observed that split tensile strength of steel scrap concrete is increased slightly. Split tensile strength of Steel scrap concrete is found to be maximum with volume fraction of 2.0% steel scrap. The steel scrap gives good result in split tensile strength of concrete. From the study concluded that steel scrap can be used in concrete to reduce brittleness of concrete to some extent.

Joint stiffness and running economy during imposed forefoot strike before and after a long run in rearfoot strike runners.

Science.gov (United States)

Melcher, Daniel A; Paquette, Max R; Schilling, Brian K; Bloomer, Richard J

2017-12-01

Research has focused on the effects of acute strike pattern modifications on lower extremity joint stiffness and running economy (RE). Strike pattern modifications on running biomechanics have mostly been studied while runners complete short running bouts. This study examined the effects of an imposed forefoot strike (FFS) on RE and ankle and knee joint stiffness before and after a long run in habitual rearfoot strike (RFS) runners. Joint kinetics and RE were collected before and after a long run. Sagittal joint kinetics were computed from kinematic and ground reaction force data that were collected during over-ground running trials in 13 male runners. RE was measured during treadmill running. Knee flexion range of motion, knee extensor moment and ankle joint stiffness were lower while plantarflexor moment and knee joint stiffness were greater during imposed FFS compared with RFS. The long run did not influence the difference in ankle and knee joint stiffness between strike patterns. Runners were more economical during RFS than imposed FFS and RE was not influenced by the long run. These findings suggest that using a FFS pattern towards the end of a long run may not be mechanically or metabolically beneficial for well-trained male RFS runners.

45 CFR 264.72 - What requirements are imposed on a State if it receives contingency funds?

Science.gov (United States)

2010-10-01

... receives contingency funds? 264.72 Section 264.72 Public Welfare Regulations Relating to Public Welfare... Contingency Fund? § 264.72 What requirements are imposed on a State if it receives contingency funds? (a)(1) A State must meet a Contingency Fund MOE level of 100 percent of historic State expenditures for FY 1994...

COMPARISON OF CONCENTRIC AND ECCENTRIC HAMSTRING STRENGTH TRAINING IN IMPROVING MUSCLE STRENGTH AND POWER AMONG FUTSAL PLAYERS A RANDOMIZED CONTROLLED TRIAL

Directory of Open Access Journals (Sweden)

Arunkumar Nedunchezhiyan

2016-12-01

Full Text Available Background: Hamstring injury is a common problem in many sports, especially those involving acceleration and maximal sprints. Hamstring strains are both common and painful. During sprinting the hip flexor and knee extensor torques are frequently produced and is opposed by the hamstring muscles, hence there are numerous studies done on the muscle strength training to prevent the hamstring strain injury as it is statistically stated as the highest rate involved injury in the contact sport. This study has been focused to evaluate the effectiveness of concentric and eccentric exercises in improving hamstring muscle strength and power among futsal players. Method: Thirty recreational futsal players were recruited for the study and were randomly divided into two groups. Each group received either hamstring curl exercise (concentric or Nordic hamstring exercise (eccentric twice a week for 4 weeks. The manual muscle test (MMT and 40-yard dash test was used to evaluate the muscle strength and power respectively by comparing the pretest and posttest values for both groups. Results: Wilcoxon signed rank test showed that there is no statistically significant difference between pre and post test values of MMT (Concentric (right side, z=.317; left side, z=.157, Eccentric (right side, z=.157; left side, z=.317 in both groups. Based on paired 't' test there is a significant difference between the pre and post test on improving muscle power [Concentric group, P=.020; Eccentric Group, P=.000]. Mann–Whitney U test and unpaired 't' test showed that there is no significant difference between both groups of MMT (z=.775 and 40-yard dash test (P=.707 respectively. Conclusion: The concentric strength training and eccentric strength training have a similar effect in improving hamstring muscle power in futsal players.

Does the Association with Psychosomatic Health Problems Differ between Cyberbullying and Traditional Bullying?

Science.gov (United States)

Beckman, Linda; Hagquist, Curt; Hellstrom, Lisa

2012-01-01

The association between mental health problems and traditional bullying is well known, whereas the strength of the association in cyberbullying is less known. This study aimed to compare the association between mutually exclusive groups of bullying involvement and psychosomatic problems as measured by the PsychoSomatic Problems scale. The sample…

25 CFR 900.46 - What requirements are imposed upon the Secretary for financial management by these standards?

Science.gov (United States)

2010-04-01

... financial management by these standards? 900.46 Section 900.46 Indians BUREAU OF INDIAN AFFAIRS, DEPARTMENT... Management Systems Standards for Financial Management Systems § 900.46 What requirements are imposed upon the Secretary for financial management by these standards? The Secretary shall establish procedures, consistent...

Acute Effects of Partial-Body Cryotherapy on Isometric Strength: Maximum Handgrip Strength Evaluation.

Science.gov (United States)

De Nardi, Massimo; Pizzigalli, Luisa; Benis, Roberto; Caffaro, Federica; Micheletti Cremasco, Margherita

2017-12-01

De Nardi, M, Pizzigalli, L, Benis, R, Caffaro, F, and Cremasco, MM. Acute effects of partial-body cryotherapy on isometric strength: maximum handgrip strength evaluation. J Strength Cond Res 31(12): 3497-3502, 2017-The aim of the study was to evaluate the influence of a single partial-body cryotherapy (PBC) session on the maximum handgrip strength (JAMAR Hydraulic Hand dynamometer). Two hundred healthy adults were randomized into a PBC group and a control group (50 men and 50 women in each group). After the initial handgrip strength test (T0), the experimental group performed a 150-second session of PBC (temperature range between -130 and -160° C), whereas the control group stayed in a thermo neutral room (22.0 ± 0.5° C). Immediately after, both groups performed another handgrip strength test (T1). Data underlined that both groups showed an increase in handgrip strength values, especially the experimental group (Control: T0 = 39.48 kg, T1 = 40.01 kg; PBC: T0 = 39.61 kg, T1 = 41.34 kg). The analysis also reported a statistical effect related to gender (F = 491.99, P ≤ 0.05), with women showing lower handgrip strength values compared with men (women = 30.43 kg, men = 52.27 kg). Findings provide the first evidence that a single session of PBC leads to the improvement of muscle strength in healthy people. The results of the study imply that PBC could be performed also before a training session or a sport competition, to increase hand isometric strength.

Robustness of Operational Matrices of Differentiation for Solving State-Space Analysis and Optimal Control Problems

Directory of Open Access Journals (Sweden)

Emran Tohidi

2013-01-01

Full Text Available The idea of approximation by monomials together with the collocation technique over a uniform mesh for solving state-space analysis and optimal control problems (OCPs has been proposed in this paper. After imposing the Pontryagins maximum principle to the main OCPs, the problems reduce to a linear or nonlinear boundary value problem. In the linear case we propose a monomial collocation matrix approach, while in the nonlinear case, the general collocation method has been applied. We also show the efficiency of the operational matrices of differentiation with respect to the operational matrices of integration in our numerical examples. These matrices of integration are related to the Bessel, Walsh, Triangular, Laguerre, and Hermite functions.

Human fascioliasis: a parasitic health problem in Dakahlia Governorate, Egypt.

Science.gov (United States)

el Shazly, A M; Handousa, A E; Youssef, M E; Rizk, H; Hamouda, M M

1991-08-01

Fascioliasis has a cosmopolitan distribution and is prevalent in sheep-raising countries. Now, it is an increasingly important parasite of man in the Mediterranean countries. In Dakahlia G., human fascioliasis has imposed itself as a parasitic health problem. In this paper, 23 human cases were selected to throw some light on the signs, symptoms and diagnosis of the disease. It was concluded that painful hepatomegaly, fever, anaemia and marked eosinophilia are tetrad suggesting fascioliasis in patient who has consumed watercress as green salade. Data concerning treatment and follow up will be published later.

Traditional versus functional strength training: Effects on muscle strength and power in the elderly

OpenAIRE

Seiler, Hilde Lohne; Torstveit, Monica Klungland; Anderssen, Sigmund A.

2013-01-01

Published versiom of an article in the journal:Journal of Aging and Physical Activity. Also available from Human Kinetics: http://http://journals.humankinetics.com/japa-back-issues/japa-volume-21-issue-1-january/traditional-versus-functional-strength-training-effects-on-muscle-strength-and-power-in-the-elderly The aim was to determine whether strength training with machines vs. functional strength training at 80% of one-repetition maximum improves muscle strength and power among the elderl...

Appreciative Problem Solving

DEFF Research Database (Denmark)

Hansen, David

2012-01-01

Many industrial production work systems have increased in complexity, and their new business model scompete on innovation, rather than low cost.At a medical device production facility committed to Lean Production, a research project was carried out to use Appreciative Inquiry to better engage...... employee strengths in continuou simprovements of the work system. The research question was: “How can Lean problem solving and Appreciative Inquiry be combined for optimized work system innovation?” The research project was carried out as a co-creation process with close cooperation between researcher...

Finite cover method with mortar elements for elastoplasticity problems

Science.gov (United States)

Kurumatani, M.; Terada, K.

2005-06-01

Finite cover method (FCM) is extended to elastoplasticity problems. The FCM, which was originally developed under the name of manifold method, has recently been recognized as one of the generalized versions of finite element methods (FEM). Since the mesh for the FCM can be regular and squared regardless of the geometry of structures to be analyzed, structural analysts are released from a burdensome task of generating meshes conforming to physical boundaries. Numerical experiments are carried out to assess the performance of the FCM with such discretization in elastoplasticity problems. Particularly to achieve this accurately, the so-called mortar elements are introduced to impose displacement boundary conditions on the essential boundaries, and displacement compatibility conditions on material interfaces of two-phase materials or on joint surfaces between mutually incompatible meshes. The validity of the mortar approximation is also demonstrated in the elastic-plastic FCM.

Public opinion on imposing restrictions to people with an alcohol- or drug addiction : A cross-sectional survey

NARCIS (Netherlands)

van Boekel, L.C.; Brouwers, E.P.M.; van Weeghel, J.; Garretsen, H.F.L.

2013-01-01

Purpose Alcohol- and drug addiction tends to evoke disapproval and rejection among people. This study provides insight into the origin of people’s negative attitudes towards these people. Corrigan’s attribution model is used to examine intentions of the Dutch public to impose restrictions to people

Nuclear plant problem needs a federal solution

International Nuclear Information System (INIS)

Zitser, B.S.

1984-01-01

Utilities presently committed to nuclear construction programs, regardless of their stage of completion, are experiencing a marked decline in financial health which the author of the following believes will be a long-term trend. Concerns over quality control, siting misgivings, cost underestimates, and consequential rate shock have increased pessimism on the part of investors, ratepayers, and regulators. The article describes the financial challenges facing one nuclear utility and discusses the factors contributing to widely disparate rate impact projections offered by utilities and regulators. The solution to financing difficulties imposed by cancellations and delays may lie with yet another player: the federal government. Outlining its potential advantages and problems, the author offers his proposal

Solution to the sign problem in a frustrated quantum impurity model

Energy Technology Data Exchange (ETDEWEB)

Hann, Connor T., E-mail: connor.hann@yale.edu [Department of Physics, Box 90305, Duke University, Durham, NC 27708 (United States); Huffman, Emilie [Department of Physics, Box 90305, Duke University, Durham, NC 27708 (United States); Chandrasekharan, Shailesh [Department of Physics, Box 90305, Duke University, Durham, NC 27708 (United States); Center for High Energy Physics, Indian Institute of Science, Bangalore, 560 012 (India)

2017-01-15

In this work we solve the sign problem of a frustrated quantum impurity model consisting of three quantum spin-half chains interacting through an anti-ferromagnetic Heisenberg interaction at one end. We first map the model into a repulsive Hubbard model of spin-half fermions hopping on three independent one dimensional chains that interact through a triangular hopping at one end. We then convert the fermion model into an inhomogeneous one dimensional model and express the partition function as a weighted sum over fermion worldline configurations. By imposing a pairing of fermion worldlines in half the space we show that all negative weight configurations can be eliminated. This pairing naturally leads to the original frustrated quantum spin model at half filling and thus solves its sign problem.

The M-OLAP Cube Selection Problem: A Hyper-polymorphic Algorithm Approach

Science.gov (United States)

Loureiro, Jorge; Belo, Orlando

OLAP systems depend heavily on the materialization of multidimensional structures to speed-up queries, whose appropriate selection constitutes the cube selection problem. However, the recently proposed distribution of OLAP structures emerges to answer new globalization's requirements, capturing the known advantages of distributed databases. But this hardens the search for solutions, especially due to the inherent heterogeneity, imposing an extra characteristic of the algorithm that must be used: adaptability. Here the emerging concept known as hyper-heuristic can be a solution. In fact, having an algorithm where several (meta-)heuristics may be selected under the control of a heuristic has an intrinsic adaptive behavior. This paper presents a hyper-heuristic polymorphic algorithm used to solve the extended cube selection and allocation problem generated in M-OLAP architectures.

The dimension split element-free Galerkin method for three-dimensional potential problems

Science.gov (United States)

Meng, Z. J.; Cheng, H.; Ma, L. D.; Cheng, Y. M.

2018-02-01

This paper presents the dimension split element-free Galerkin (DSEFG) method for three-dimensional potential problems, and the corresponding formulae are obtained. The main idea of the DSEFG method is that a three-dimensional potential problem can be transformed into a series of two-dimensional problems. For these two-dimensional problems, the improved moving least-squares (IMLS) approximation is applied to construct the shape function, which uses an orthogonal function system with a weight function as the basis functions. The Galerkin weak form is applied to obtain a discretized system equation, and the penalty method is employed to impose the essential boundary condition. The finite difference method is selected in the splitting direction. For the purposes of demonstration, some selected numerical examples are solved using the DSEFG method. The convergence study and error analysis of the DSEFG method are presented. The numerical examples show that the DSEFG method has greater computational precision and computational efficiency than the IEFG method.

Strength of precast concrete shear joints reinforced with high-strength wire ropes

DEFF Research Database (Denmark)

Joergensen, Henrik B.; Hoang, Linh Cao; Hagsten, Lars German

2017-01-01

This paper concerns the in-plane shear strength of connections between precast concrete wall elements reinforced with looped high-strength wire ropes. The looped wire ropes are pre-installed in so-called ‘wire boxes’ which function as shear keys. Although only a small amount of research...... on the shear strength of such connections can be found in the literature, this type of connection is increasingly being used because wire ropes are much more construction-friendly than traditional U-bars. A rigid plastic upper bound model for the shear strength of wall connections reinforced with looped wire...... ropes that are pre-installed in wire boxes is presented along with test results on the shear strength of connections with double-wire boxes. It is shown that the plastic solution agrees well with both the obtained test results and results from previously conducted tests....

Do We Need to Impose More Regulation Upon the World Wide Web? -A Metasystem Analysis

Directory of Open Access Journals (Sweden)

John P. van Gigch

2000-01-01

Full Text Available Every day a new problem attributable to the World Wide Web's lack of formal structure and/or organization is made public. What arguably could be represented as one of its main strengths is rapidly turning out to be one of its most flagrant weaknesses. The intent of this article is to show the need to establish a more formal organization than presently exists over the World Wide Web. (This article will use the terms the Internet and Cyberspace interchangeably. It is proposed that this formal organization take the form of a metacontrol system--to be explained-- and rely, at least in part, for this control to self-regulate. The so-called metasystem system would be responsible for preventing some of the unanticipated situations that take place in cyberspace and that, due to the web's lack of maturity, have not been encountered heretofore. Some activities, such as the denial-of-service (DoS attacks, may well be illicit. Others, like the question of establishing a world-wide democratic board to administer the Internet's address system, are so new that there are no technical, legal or political precedents to ensure its design will succeed. What is needed is a formal, over-arching control system, i.e. a "metasystem," to arbitrate over controversies, decide on the legality of new policies and, in general, act as a metalevel controller over the activities of the virtual community called Cyberspace. The World Wide Web Consortium has emerged as a possible candidate for this role.This paper uses control theory to define both the problem and the proposed solution. Cyberspace lacks a metacontroller that can be used to resolve the many problems that arise when a new organizational configuration, such as the Internet, is created and when questions surface about the extent to which new activities interfere with individual or corporate freedoms.

Degradation of the compressive strength of unstiffened/stiffened steel plates due to both-sides randomly distributed corrosion wastage

Directory of Open Access Journals (Sweden)

Zorareh Hadj Mohammad

Full Text Available The paper addresses the problem of the influence of randomly distributed corrosion wastage on the collapse strength and behaviour of unstiffened/stiffened steel plates in longitudinal compression. A series of elastic-plastic large deflection finite element analyses is performed on both-sides randomly corroded steel plates and stiffened plates. The effects of general corrosion are introduced into the finite element models using a novel random thickness surface model. Buckling strength, post-buckling behaviour, ultimate strength and post-ultimate behaviour of the models are investigated as results of both-sides random corrosion.

Comparison of Shear Strength Properties for Undisturbed and Reconstituted Parit Nipah Peat, Johor

Science.gov (United States)

Azhar, A. T. S.; Norhaliza, W.; Ismail, B.; Abdullah, M. E.; Zakaria, M. N.

2016-11-01

Shear strength of soil is required to determine the soil stability and design the foundations. Peat is known as a soil with complex natural formations which also contributes problems to the researchers, developers, engineers and contractors in constructions and infrastructures. Most researchers conducted experiment and investigation of shear strength on peat using shear box test and simple shear test, but only a few had discovered the behavior of peat using triaxial consolidated undrained test. The aim of this paper is to determine the undrained shear strength properties of reconstituted peat and undisturbed peat of Parit Nipah, Johor for comparison purposes. All the reconstituted peat samples were formed with the size that passed opening sieve 3.35 mm and preconsolidation pressure at 100 kPa. The result of undrained shear strength of reconstituted peat was 21kPa for cohesion with the angle of friction, 41° compare to the undisturbed peat with cohesion 10 kPa and angle of friction, 16°. The undrained shear strength properties result obtained shows that the reconstituted peat has higher strength than undisturbed peat. For relationship deviator stress-strain, σd max and excess pore pressure, Δu, it shows that both of undisturbed and reconstituted gradually increased when σ’ increased, but at the end of the test, the values are slightly dropped. The physical properties of undisturbed and reconstituted peat were also investigated to correlate with the undrained shear strength results.

Diffusion with Varying Drag; the Runaway Problem.

Science.gov (United States)

Rollins, David Kenneth

We study the motion of electrons in an ionized plasma of electrons and ions in an external electric field. A probability distribution function describes the electron motion and is a solution of a Fokker-Planck equation. In zero field, the solution approaches an equilibrium Maxwellian. For arbitrarily small field, electrons overcome the diffusive effects and are freely accelerated by the field. This is the electron runaway phenomenon. We treat the electric field as a small perturbation. We consider various diffusion coefficients for the one dimensional problem and determine the runaway current as a function of the field strength. Diffusion coefficients, non-zero on a finite interval are examined. Some non-trivial cases of these can be solved exactly in terms of known special functions. The more realistic case where the diffusion coefficient decays with velocity are then considered. To determine the runaway current, the equivalent Schrodinger eigenvalue problem is analysed. The smallest eigenvalue is shown to be equal to the runaway current. Using asymptotic matching a solution can be constructed which is then used to evaluate the runaway current. The runaway current is exponentially small as a function of field strength. This method is used to extract results from the three dimensional problem.

Diffusion with varying drag; the runaway problem

International Nuclear Information System (INIS)

Rollins, D.K.

1986-01-01

The motion of electrons in an ionized plasma of electrons and ions in an external electric field is studied. A probability distribution function describes the electron motion and is a solution of a Fokker-Planck equation. In zero field, the solution approaches an equilibrium Maxwellian. For arbitrarily small field, electrons overcome the diffusive effects and are freely accelerated by the field. This is the electron-runaway phenomenon. The electric field is treated as a small perturbation. Various diffusion coefficients are considered for the one dimensional problem, and the runaway current is determined as a function of the field strength. Diffusion coefficients, non-zero on a finite interval are examined. Some non-trivial cases of these can be solved exactly in terms of known special functions. The more realistic case where the diffusion coeffient decays with velocity are then considered. To determine the runaway current, the equivalent Schroedinger eigenvalue problem is analyzed. The smallest eigenvalue is shown to be equal to the runaway current. Using asymptotic matching, a solution can be constructed which is then used to evaluate the runaway current. The runaway current is exponentially small as a function of field strength. This method is used to extract results from the three dimensional problem

The effect of Nordic hamstring strength training on muscle architecture, stiffness, and strength.

Science.gov (United States)

Seymore, Kayla D; Domire, Zachary J; DeVita, Paul; Rider, Patrick M; Kulas, Anthony S

2017-05-01

Hamstring strain injury is a frequent and serious injury in competitive and recreational sports. While Nordic hamstring (NH) eccentric strength training is an effective hamstring injury-prevention method, the protective mechanism of this exercise is not understood. Strength training increases muscle strength, but also alters muscle architecture and stiffness; all three factors may be associated with reducing muscle injuries. The purpose of this study was to examine the effects of NH eccentric strength training on hamstring muscle architecture, stiffness, and strength. Twenty healthy participants were randomly assigned to an eccentric training group or control group. Control participants performed static stretching, while experimental participants performed static stretching and NH training for 6 weeks. Pre- and post-intervention measurements included: hamstring muscle architecture and stiffness using ultrasound imaging and elastography, and maximal hamstring strength measured on a dynamometer. The experimental group, but not the control group, increased volume (131.5 vs. 145.2 cm 3 , p hamstring strength. The NH intervention was an effective training method for muscle hypertrophy, but, contrary to common literature findings for other modes of eccentric training, did not increase fascicle length. The data suggest that the mechanism behind NH eccentric strength training mitigating hamstring injury risk could be increasing volume rather than increasing muscle length. Future research is, therefore, warranted to determine if muscle hypertrophy induced by NH training lowers future hamstring strain injury risk.

Burst strength of tubing and casing based on twin shear unified strength theory.

Science.gov (United States)

Lin, Yuanhua; Deng, Kuanhai; Sun, Yongxing; Zeng, Dezhi; Liu, Wanying; Kong, Xiangwei; Singh, Ambrish

2014-01-01

The internal pressure strength of tubing and casing often cannot satisfy the design requirements in high pressure, high temperature and high H2S gas wells. Also, the practical safety coefficient of some wells is lower than the design standard according to the current API 5C3 standard, which brings some perplexity to the design. The ISO 10400: 2007 provides the model which can calculate the burst strength of tubing and casing better than API 5C3 standard, but the calculation accuracy is not desirable because about 50 percent predictive values are remarkably higher than real burst values. So, for the sake of improving strength design of tubing and casing, this paper deduces the plastic limit pressure of tubing and casing under internal pressure by applying the twin shear unified strength theory. According to the research of the influence rule of yield-to-tensile strength ratio and mechanical properties on the burst strength of tubing and casing, the more precise calculation model of tubing-casing's burst strength has been established with material hardening and intermediate principal stress. Numerical and experimental comparisons show that the new burst strength model is much closer to the real burst values than that of other models. The research results provide an important reference to optimize the tubing and casing design of deep and ultra-deep wells.

Lifting strength in two-person teamwork.

Science.gov (United States)

Lee, Tzu-Hsien

2016-01-01

This study examined the effects of lifting range, hand-to-toe distance, and lifting direction on single-person lifting strengths and two-person teamwork lifting strengths. Six healthy males and seven healthy females participated in this study. Two-person teamwork lifting strengths were examined in both strength-matched and strength-unmatched groups. Our results showed that lifting strength significantly decreased with increasing lifting range or hand-to-toe distance. However, lifting strengths were not affected by lifting direction. Teamwork lifting strength did not conform to the law of additivity for both strength-matched and strength-unmatched groups. In general, teamwork lifting strength was dictated by the weaker of the two members, implying that weaker members might be exposed to a higher potential danger in teamwork exertions. To avoid such overexertion in teamwork, members with significantly different strength ability should not be assigned to the same team.

The theoretical tensile strength of fcc crystals predicted from shear strength calculations

International Nuclear Information System (INIS)

Cerny, M; Pokluda, J

2009-01-01

This work presents a simple way of estimating uniaxial tensile strength on the basis of theoretical shear strength calculations, taking into account its dependence on a superimposed normal stress. The presented procedure enables us to avoid complicated and time-consuming analyses of elastic stability of crystals under tensile loading. The atomistic simulations of coupled shear and tensile deformations in cubic crystals are performed using first principles computational code based on pseudo-potentials and the plane wave basis set. Six fcc crystals are subjected to shear deformations in convenient slip systems and a special relaxation procedure controls the stress tensor. The obtained dependence of the ideal shear strength on the normal tensile stress seems to be almost linearly decreasing for all investigated crystals. Taking these results into account, the uniaxial tensile strength values in three crystallographic directions were evaluated by assuming a collapse of the weakest shear system. Calculated strengths for and loading were found to be mostly lower than previously calculated stresses related to tensile instability but rather close to those obtained by means of the shear instability analysis. On the other hand, the strengths for loading almost match the stresses related to tensile instability.

The strength of friendship ties in proximity sensor data.

Directory of Open Access Journals (Sweden)

Vedran Sekara

Full Text Available Understanding how people interact and socialize is important in many contexts from disease control to urban planning. Datasets that capture this specific aspect of human life have increased in size and availability over the last few years. We have yet to understand, however, to what extent such electronic datasets may serve as a valid proxy for real life social interactions. For an observational dataset, gathered using mobile phones, we analyze the problem of identifying transient and non-important links, as well as how to highlight important social interactions. Applying the Bluetooth signal strength parameter to distinguish between observations, we demonstrate that weak links, compared to strong links, have a lower probability of being observed at later times, while such links-on average-also have lower link-weights and probability of sharing an online friendship. Further, the role of link-strength is investigated in relation to social network properties.

The strength of friendship ties in proximity sensor data.

Science.gov (United States)

Sekara, Vedran; Lehmann, Sune

2014-01-01

Understanding how people interact and socialize is important in many contexts from disease control to urban planning. Datasets that capture this specific aspect of human life have increased in size and availability over the last few years. We have yet to understand, however, to what extent such electronic datasets may serve as a valid proxy for real life social interactions. For an observational dataset, gathered using mobile phones, we analyze the problem of identifying transient and non-important links, as well as how to highlight important social interactions. Applying the Bluetooth signal strength parameter to distinguish between observations, we demonstrate that weak links, compared to strong links, have a lower probability of being observed at later times, while such links-on average-also have lower link-weights and probability of sharing an online friendship. Further, the role of link-strength is investigated in relation to social network properties.

12 CFR 19.135 - Applications for stay or review of disciplinary actions imposed by registered clearing agencies.

Science.gov (United States)

2010-01-01

... Involving the Federal Securities Laws § 19.135 Applications for stay or review of disciplinary actions... 12 Banks and Banking 1 2010-01-01 2010-01-01 false Applications for stay or review of disciplinary actions imposed by registered clearing agencies. 19.135 Section 19.135 Banks and Banking COMPTROLLER OF...

An Improved Multi-Objective Programming with Augmented ε-Constraint Method for Hazardous Waste Location-Routing Problems.

Science.gov (United States)

Yu, Hao; Solvang, Wei Deng

2016-05-31

Hazardous waste location-routing problems are of importance due to the potential risk for nearby residents and the environment. In this paper, an improved mathematical formulation is developed based upon a multi-objective mixed integer programming approach. The model aims at assisting decision makers in selecting locations for different facilities including treatment plants, recycling plants and disposal sites, providing appropriate technologies for hazardous waste treatment, and routing transportation. In the model, two critical factors are taken into account: system operating costs and risk imposed on local residents, and a compensation factor is introduced to the risk objective function in order to account for the fact that the risk level imposed by one type of hazardous waste or treatment technology may significantly vary from that of other types. Besides, the policy instruments for promoting waste recycling are considered, and their influence on the costs and risk of hazardous waste management is also discussed. The model is coded and calculated in Lingo optimization solver, and the augmented ε-constraint method is employed to generate the Pareto optimal curve of the multi-objective optimization problem. The trade-off between different objectives is illustrated in the numerical experiment.

An Improved Multi-Objective Programming with Augmented ε-Constraint Method for Hazardous Waste Location-Routing Problems

Directory of Open Access Journals (Sweden)

Hao Yu

2016-05-01

Full Text Available Hazardous waste location-routing problems are of importance due to the potential risk for nearby residents and the environment. In this paper, an improved mathematical formulation is developed based upon a multi-objective mixed integer programming approach. The model aims at assisting decision makers in selecting locations for different facilities including treatment plants, recycling plants and disposal sites, providing appropriate technologies for hazardous waste treatment, and routing transportation. In the model, two critical factors are taken into account: system operating costs and risk imposed on local residents, and a compensation factor is introduced to the risk objective function in order to account for the fact that the risk level imposed by one type of hazardous waste or treatment technology may significantly vary from that of other types. Besides, the policy instruments for promoting waste recycling are considered, and their influence on the costs and risk of hazardous waste management is also discussed. The model is coded and calculated in Lingo optimization solver, and the augmented ε-constraint method is employed to generate the Pareto optimal curve of the multi-objective optimization problem. The trade-off between different objectives is illustrated in the numerical experiment.

Imposed Work of Breathing and Breathing Comfort of Nonintubated Volunteers Breathing with Three Portable Ventilators and a Critical Care Ventilator

National Research Council Canada - National Science Library

Austin, Paul

2001-01-01

.... The purpose of this study was to assess the imposed inspiratory work of breathing and breathing comfort of nonintubated healthy volunteers breathing spontaneously through three portable ventilators...

The Effect of Sodium Hydroxide Molarity on Strength Development of Non-Cement Class C Fly Ash Geopolymer Mortar

Science.gov (United States)

Wardhono, A.

2018-01-01

The use of fly ash as cement replacement material can overcome the environmental issues, especially the global warming problem caused by the greenhouse effect. This is attributed to the CO2 gas produced during the cement manufacturing process, which 1 ton of cement is equivalent to 1 ton CO2. However, the major problem of fly ash is the requirement of activators to activate the polymer reactions. The most common activator used in non-cement or geopolymer material is the combination of sodium hydroxide (NaOH) and sodium silicate. This study aims to identify the effect of NaOH molarity as activator on strength development of non-cement class C fly ash geopolymer mortar. The molarity variations of NaOH were 6 Molar (M), 8M, 10M, 12M, 14M and 15M. The compressive strength test was performed at the age of 3, 7 and 28 days in accordance with ASTM standard, and the specimens were cured at room temperature. The results show that the highest compressive strength was achieved by geopolymer mortar with a molarity of 12M. It exhibits a higher strength to that normal mortar at 28 days. However, the use of NaOH molarity more than 12M tends to decrease the strength of non-cement geopolymer mortar specimens.

Study on creep of fiber reinforced ultra-high strength concrete based on strength

Science.gov (United States)

Peng, Wenjun; Wang, Tao

2018-04-01

To complement the creep performance of ultra-high strength concrete, the long creep process of fiber reinforced concrete was studied in this paper. The long-term creep process and regularity of ultra-high strength concrete with 0.5% PVA fiber under the same axial compression were analyzed by using concrete strength (C80/C100/C120) as a variable. The results show that the creep coefficient of ultra-high strength concrete decreases with the increase of concrete strength. Compared with ACI209R (92), GL2000 models, it is found that the predicted value of ACI209R (92) are close to the experimental value, and the creep prediction model suitable for this experiment is proposed based on ACI209R (92).

Methodological aspects of functional neuroimaging at high field strength: a critical review

International Nuclear Information System (INIS)

Scheef, L.; Landsberg, M.W.; Boecker, H.

2007-01-01

The last few years have proven that high field magnetic resonance imaging (MRI) is superior in nearly every way to conventional equipment up to 1.5 tesla (T). Following the global success of 3T-scanners in research institutes and medical practices, a new generation of MRI devices with field strengths of 7T and higher is now on the horizon. The introduction of ultra high fields has brought MRI technology closer to the physical limitations and increasingly greater costs are required to achieve this goal. This article provides a critical overview of the advantages and problems of functional neuroimaging using ultra high field strengths. This review is principally limited to T2*-based functional imaging techniques not dependent on contrast agents. The main issues include the significance of high field technology with respect to SNR, CNR, resolution, and sequences, as well as artifacts, noise exposure, and SAR. Of great relevance is the discussion of parallel imaging, which will presumably determine the further development of high and ultra high field strengths. Finally, the importance of high field strengths for functional neuroimaging is explained by selected publications. (orig.)

Quasi-discrete particle motion in an externally imposed, ordered structure in a dusty plasma at high magnetic field

Energy Technology Data Exchange (ETDEWEB)

Thomas, Edward, E-mail: etjr@auburn.edu; Konopka, Uwe; Lynch, Brian; Adams, Stephen; LeBlanc, Spencer [Physics Department, Auburn University, Auburn, Alabama 36849 (United States); Merlino, Robert L. [Department of Physics and Astronomy, The University of Iowa, Iowa City, Iowa 52242 (United States); Rosenberg, Marlene [Department of Electrical and Computer Engineering, University of California, San Diego, La Jolla, California 92093 (United States)

2015-11-15

Dusty plasmas have been studied in argon, radio frequency (rf) glow discharge plasmas at magnetic fields up to 2.5 T where the electrons and ions are strongly magnetized. Plasmas are generated between two parallel plate electrodes where the lower, powered electrode is solid and the upper electrode supports a dual mesh consisting of #24 brass and #30 aluminum wire cloth. In this experiment, we study the formation of imposed ordered structures and particle dynamics as a function of magnetic field. Through observations of trapped particles and the quasi-discrete (i.e., “hopping”) motion of particles between the trapping locations, it is possible to make a preliminary estimate of the potential structure that confines the particles to a grid structure in the plasma. This information is used to gain insight into the formation of the imposed grid pattern of the dust particles in the plasma.

Experimental knee joint pain during strength training and muscle strength gain in healthy subjects

DEFF Research Database (Denmark)

Sørensen, T J; Langberg, Henning; Hodges, P W

2012-01-01

Knee joint pain and reduced quadriceps strength are cardinal symptoms in many knee pathologies. In people with painful knee pathologies, quadriceps exercise reduces pain, improves physical function, and increases muscle strength. A general assumption is that pain compromises muscle function...... and thus may prevent effective rehabilitation. This study evaluated the effects of experimental knee joint pain during quadriceps strength training on muscle strength gain in healthy individuals....

Tensile strength and fatigue strength of 6061 aluminum alloy friction welded joints

Energy Technology Data Exchange (ETDEWEB)

Ochi, H.; Tsujino, R. [Osaka Inst. of Tech., Asahi-ku Osaka (Japan); Sawai, T. [Osaka Sangyo Univ., Daito (Japan); Yamamoto, Y. [Setsunan Univ., Neyagawa (Japan); Ogawa, K. [Osaka Prefecture Univ., Sakai (Japan); Suga, Y. [Keio Univ., Kohoku-ku, Yokohama (Japan)

2002-07-01

Friction welding of 6061 aluminum alloy was carried out in order to examine the relationship between deformation heat input in the upset stage and joint performance. The joint performance was evaluated by tensile testing and fatigue testing. Stabilized tensile strength was obtained when the deformation heat input in the upset stage exceeded 200 J/s. Weld condition at the weld interface and the width of softened area affected fatigue strength more than tensile strength. That is, when the weld condition at the weld interface is good and the softened area is wide, fatigue strength increases. On the other hand, when the weld condition at the weld interface is good and the softened area is narrow, and when the weld condition at the weld interface is somewhat poor in spite of the wide softened area, fatigue strength decreases. The fatigue limit obtained by the fatigue testing revealed that, when the deformation heat input in the upset stage exceeded a certain value, sound joints could be produced. (orig.)

The Redistributive Impact of Restrictive Measures on EU Members: Winners and Losers from Imposing Sanctions on Russia

NARCIS (Netherlands)

Giumelli, Francesco

2017-01-01

EU sanctions on Russia created concerns among its members. It is well known that sanctions impose a cost on their targets as well as on the senders, as lamented by European governments, but the costs of EU sanctions on its members have not been fully explored. This article intends to fill this gap

Provision of wear resistance and fatigue strength of surfaces during electroerosive processing

Science.gov (United States)

Fedonin, O. N.; Syanov, S. Yu; Papikyan, A. M.

2018-03-01

This article is a generalization of the results of theoretical studies of the effect of erosion control regimes on the operational properties of mold-forming parts of molds. The main problem is the provision of wear resistance and fatigue strength in the electroerosion processing of these types of products. The analysis showed that the fatigue strength is affected by the processing regimes and the coefficient after the erosion treatment. The index of wear resistance is determined both by the treatment modes and by the physical-mechanical properties of the billet materials. To ensure the operational performance of products, it is necessary to establish the physical picture of the processing of complex profile parts by finding the optimum eroding regime.

The eigenvalue problem in phase space.

Science.gov (United States)

Cohen, Leon

2018-06-30

We formulate the standard quantum mechanical eigenvalue problem in quantum phase space. The equation obtained involves the c-function that corresponds to the quantum operator. We use the Wigner distribution for the phase space function. We argue that the phase space eigenvalue equation obtained has, in addition to the proper solutions, improper solutions. That is, solutions for which no wave function exists which could generate the distribution. We discuss the conditions for ascertaining whether a position momentum function is a proper phase space distribution. We call these conditions psi-representability conditions, and show that if these conditions are imposed, one extracts the correct phase space eigenfunctions. We also derive the phase space eigenvalue equation for arbitrary phase space distributions functions. © 2017 Wiley Periodicals, Inc. © 2017 Wiley Periodicals, Inc.

29 CFR 471.14 - What sanctions and penalties may be imposed for noncompliance, and what procedures will the...

Science.gov (United States)

2010-07-01

... LABOR NOTIFICATION OF EMPLOYEE RIGHTS UNDER FEDERAL LABOR LAWS OBLIGATIONS OF FEDERAL CONTRACTORS AND SUBCONTRACTORS; NOTIFICATION OF EMPLOYEE RIGHTS UNDER FEDERAL LABOR LAWS General Enforcement; Compliance Review... 29 Labor 2 2010-07-01 2010-07-01 false What sanctions and penalties may be imposed for...

Examining the model structure of the strengths and difficulties questionnaire (SDQ)

OpenAIRE

Azzopardi, Lara Marie; Camilleri, Liberato; Sammut, Fiona; Cefai, Carmel

2016-01-01

The Strengths and Difficulties questionnaire (SDQ), proposed by Goodman 1997, has been used by researchers to measure social, emotional and behaviour difficulties in children. The SDQ includes four difficulty subscales, measuring emotional, conduct, hyperactivity and peer problems. It also includes a fifth subscale, measuring prosocial behaviour. Dickey 2004 suggested that the SDQ factor structure can be reduced to three dimensions comprising the prosocial, externalisation and internalisation...

Mental health problems in children with intellectual disability: Use of the Strengths and Difficulties Questionnaire

NARCIS (Netherlands)

Kaptein, S.; Jansen, D.E.M.C.; Vogels, A.G.C.; Reijneveld, S.A.

2008-01-01

Background: The assessment of mental health problems in children with intellectual disability (ID) mostly occurs by filling out long questionnaires that are not always validated for children without ID. The aim of this study is to assess the differences in mental health problems between children

Assessment regarding the use of the computer aided analytical models in the calculus of the general strength of a ship hull

Science.gov (United States)

Hreniuc, V.; Hreniuc, A.; Pescaru, A.

2017-08-01

Solving a general strength problem of a ship hull may be done using analytical approaches which are useful to deduce the buoyancy forces distribution, the weighting forces distribution along the hull and the geometrical characteristics of the sections. These data are used to draw the free body diagrams and to compute the stresses. The general strength problems require a large amount of calculi, therefore it is interesting how a computer may be used to solve such problems. Using computer programming an engineer may conceive software instruments based on analytical approaches. However, before developing the computer code the research topic must be thoroughly analysed, in this way being reached a meta-level of understanding of the problem. The following stage is to conceive an appropriate development strategy of the original software instruments useful for the rapid development of computer aided analytical models. The geometrical characteristics of the sections may be computed using a bool algebra that operates with ‘simple’ geometrical shapes. By ‘simple’ we mean that for the according shapes we have direct calculus relations. In the set of ‘simple’ shapes we also have geometrical entities bounded by curves approximated as spline functions or as polygons. To conclude, computer programming offers the necessary support to solve general strength ship hull problems using analytical methods.

Comparison of Post Weld Treatment of High Strength Steel Welded Joints in Medium Cycle Fatigue

DEFF Research Database (Denmark)

Pedersen, Mikkel Melters; Mouritsen, Ole Ø.; Hansen, Michael Rygaard

2010-01-01

This paper presents a comparison of three post-weld treatments for fatigue life improvement of welded joints. The objective is to determine the most suitable post-weld treatment for implementation in mass production of certain crane components manufactured from very high-strength steel...... the stress range can exceed the yield-strength of ordinary structural steel, especially when considering positive stress ratios (R > 0). Fatigue experiments and qualitative evaluation of the different post-weld treatments leads to the selection of TIG dressing. The process of implementing TIG dressing...... in mass production and some inherent initial problems are discussed. The treatment of a few critical welds leads to a significant increase in fatigue performance of the entire structure and the possibility for better utilization of very high-strength steel....

Tensile strength/yield strength (TS/YS) ratios of high-strength steel (HSS) reinforcing bars

Science.gov (United States)

Tavio, Anggraini, Retno; Raka, I. Gede Putu; Agustiar

2018-05-01

The building codes such as American Concrete Institute (ACI) 318M-14 and Standard National Indonesia (SNI) 2847:2013 require that the ratio of tensile strength (TS) and yield strength (YS) should not less than 1.25. The requirement is based on the assumption that a capability of a structural member to develop inelastic rotation capacity is a function of the length of the yield region. This paper reports an investigation on various steel grades, namely Grades 420, 550, 650, and 700 MPa, to examine the impact of different TS/YS ratios if it is less or greater than the required value. Grades 550, 650, and 700 MPa were purposely selected with the intention to examine if these higher grades are still promising to be implemented in special structural systems since they are prohibited by the building codes for longitudinal reinforcement, whereas Grade 420 MPa bars are the maximum limit of yield strength of reinforcing bars that is allowable for longitudinal reinforcement of special structural systems. Tensile tests of these steel samples were conducted under displacement controlled mode to capture the complete stress-strain curves and particularly the post-yield response of the steel bars. From the study, it can be concluded that Grade 420 performed higher TS/YS ratios and they were able to reach up to more than 1.25. However, the High Strength Still (HSS) bars (Grades 550, 600, and 700 MPa) resulted in lower TS/YS ratios (less than 1.25) compared with those of Grade 420 MPa.

Mental health problems in children with intellectual disability : use of the Strengths and Difficulties Questionnaire

NARCIS (Netherlands)

Kaptein, S.; Jansen, D. E. M. C.; Vogels, A. G. C.; Reijneveld, S. A.

Background The assessment of mental health problems in children with intellectual disability (ID) mostly occurs by filling out long questionnaires that are not always validated for children without ID. The aim of this study is to assess the differences in mental health problems between children with

Gender differences in behavioral problems and shool outcomes

DEFF Research Database (Denmark)

Kristoffersen, Jannie H. Grøne; Obel, Carsten; Smith, Nina

2014-01-01

This study analyzes gender differences in behavioral problems and school outcomes. The study is based on teacher and parent evaluations using the Strengths and Difficulties Questionnaire for approximately 6000 Danish children 10–12 years of age who were born in 1990–1992. The sample has been merged...

State-of-the-art and problems of X-ray diffraction analysis of biomacromolecules

International Nuclear Information System (INIS)

Andreeva, N. S.

2006-01-01

The state-of-the-art of X-ray diffraction studies of biomacromolecules is briefly characterized, and the challenge imposed by science is discussed. These studies are characterized by a wide scope and extensive use. This field of science is of great interest and is developed in many countries. The main purpose is to solve practical problems in medicine consisting in the design of drugs against various diseases. X-ray diffraction analysis of enzymes brought the pharmaceutical industry to a new level, thus allowing the rational design of drugs against formerly untreatable diseases. Modern X-ray diffraction studies of biomacromolecules laid the basis for a new science called structural biology. This method allows one to solve fundamental problems of physical chemistry for a new state of matter existing in living systems. Here, science poses numerous problems in analysis of X-ray diffraction data on biological macromolecules. Many of theses problems are in their infancy

The relationship between the behavior problems and motor skills of students with intellectual disability.

Science.gov (United States)

Lee, Yangchool; Jeoung, Bogja

2016-12-01

The purpose of this study was to determine the relationship between the motor skills and the behavior problems of students with intellectual disabilities. The study participants were 117 students with intellectual disabilities who were between 7 and 25 years old (male, n=79; female, n=38) and attending special education schools in South Korea. Motor skill abilities were assessed by using the second version of the Bruininks-Oseretsky test of motor proficiency, which includes subtests in fine motor control, manual coordination, body coordination, strength, and agility. Data were analyzed with SPSS IBM 21 by using correlation and regression analyses, and the significance level was set at P Manual dexterity showed a statistically significant influence on somatic complaint and anxiety/depression, and bilateral coordination had a statistically significant influence on social problems, attention problem, and aggressive behavior. Our results showed that balance had a statistically significant influence on social problems and aggressive behavior, and speed and agility had a statistically significant influence on social problems and aggressive behavior. Upper limb coordination and strength had a statistically significant influence on social problems.

Effect of concrete strength gradation to the compressive strength of graded concrete, a numerical approach

Science.gov (United States)

Pratama, M. Mirza Abdillah; Aylie, Han; Gan, Buntara Sthenly; Umniati, B. Sri; Risdanareni, Puput; Fauziyah, Shifa

2017-09-01

Concrete casting, compacting method, and characteristic of the concrete material determine the performance of concrete as building element due to the material uniformity issue. Previous studies show that gradation in strength exists on building member by nature and negatively influence the load carrying capacity of the member. A pilot research had modeled the concrete gradation in strength with controllable variable and observed that the weakest material determines the strength of graded concrete through uniaxial compressive loading test. This research intends to confirm the recent finding by a numerical approach with extensive variables of strength disparity. The finite element analysis was conducted using the Strand7 nonlinear program. The results displayed that the increase of strength disparity in graded concrete models leads to the slight reduction of models strength. A substantial difference in displacement response is encountered on the models for the small disparity of concrete strength. However, the higher strength of concrete mix in the graded concrete models contributes to the rise of material stiffness that provides a beneficial purpose for serviceability of building members.

Mapping strengths into virtues: The relation of the 24 VIA-strengths to six ubiquitous virtues

Directory of Open Access Journals (Sweden)

Willibald eRuch

2015-04-01

Full Text Available The Values-in-Action (VIA-classification distinguishes six core virtues and 24 strengths. As the assignment of the strengths to the virtues was done on theoretical grounds it still needs empirical verification. As an alternative to factor analytic investigations the present study utilizes expert judgments. In a pilot study the conceptual overlap among five sources of knowledge (strength’s name including synonyms, short definitions, brief descriptions, longer theoretical elaborations, and item content about a particular strength was examined. The results show that the five sources converged quite well, with the short definitions and the items being slightly different from the other. All strengths exceeded a cut-off value but the convergence was much better for some strengths (e.g., zest than for others (e.g., perspective. In the main study 70 experts (from psychology, philosophy, theology, etc. and 41 laypersons rated how prototypical the strengths are for each of the six virtues. The results showed that 10 were very good markers for their virtues, 9 were good markers, four were acceptable markers, and only one strength failed to reach the cut-off score for its assigned virtue. However, strengths were often markers for two or even three virtues, and occasionally they marked the other virtue more strongly than the one they were assigned to. The virtue prototypicality ratings were slightly positively correlated with higher coefficients being found for justice and humanity. A factor analysis of the 24 strengths across the ratings yielded the six factors with an only slightly different composition of strengths and double loadings. It is proposed to adjust either the classification (by reassigning strengths and by allowing strengths to be subsumed under more than one virtue or to change the definition of certain strengths so that they only exemplify one virtue. The results are discussed in the context of factor analytic attempts to verify the

Generating material strength standards of aluminum alloys for research reactors. Pt. 1. Yield strength values Sy and tensile strength values Su

International Nuclear Information System (INIS)

Tsuji, H.; Miya, K.

1995-01-01

Aluminum alloys are frequently used as structural materials for research reactors. The material strength standards, however, such as the yield strength values (S y ), the tensile strength values (S u ) and the design fatigue curve -which are needed to use aluminum alloys as structural materials in ''design by analysis'' - for those materials have not been determined yet. Hence, a series of material tests was performed and the results were statistically analyzed with the aim of generating these material strength standards. This paper, the first in a series on material strength standards of aluminum alloys, describes the aspects of the tensile properties of the standards. The draft standards were compared with MITI no. 501 as well as with the ASME codes, and the trend of the available data also was examined. It was revealed that the draft proposal could be adopted as the material strength standards, and that the values of the draft standards at and above 150 C for A6061-T6 and A6063-T6 could be applied only to the reactor operating conditions III and IV. Also the draft standards have already been adopted in the Science and Technology Agency regulatory guide (standards for structural design of nuclear research plants). (orig.)

Tensile Adhesion Strength of Biomass Ash Deposits: Effect of the Temperature Gradient and Ash Chemistry

DEFF Research Database (Denmark)

Laxminarayan, Yashasvi; Nair, Akhilesh Balachandran; Jensen, Peter Arendt

2018-01-01

Replacing coal with biomass in power plants is a viable option for reducing net CO2 emissions and combating climate change. However, biomass combustion in boilers may exacerbate problems related to ash deposition and corrosion, demanding effective deposit removal. The tensile adhesion strength...

Predicting hand function in older adults: evaluations of grip strength, arm curl strength, and manual dexterity.

Science.gov (United States)

Liu, Chiung-Ju; Marie, Deana; Fredrick, Aaron; Bertram, Jessica; Utley, Kristen; Fess, Elaine Ewing

2017-08-01

Hand function is critical for independence in activities of daily living for older adults. The purpose of this study was to examine how grip strength, arm curl strength, and manual dexterous coordination contributed to time-based versus self-report assessment of hand function in community-dwelling older adults. Adults aged ≥60 years without low vision or neurological disorders were recruited. Purdue Pegboard Test, Jamar hand dynamometer, 30-second arm curl test, Jebsen-Taylor Hand Function Test, and the Late-Life Function and Disability Instrument were administered to assess manual dexterous coordination, grip strength, arm curl strength, time-based hand function, and self-report of hand function, respectively. Eighty-four adults (mean age = 72 years) completed the study. Hierarchical multiple regressions show that older adults with better arm curl strength (β = -.25, p function test. In comparison, older adults with better grip strength (β = .40, p function. The relationship between grip strength and hand function may be test-specific. Grip strength becomes a significant factor when the test requires grip strength to successfully complete the test tasks. Arm curl strength independently contributed to hand function in both time-based and self-report assessments, indicating that strength of extrinsic muscles of the hand are essential for hand function.

The disciplined healthcare professional: a qualitative interview study on the impact of the disciplinary process and imposed measures in the Netherlands.

Science.gov (United States)

Verhoef, Lise M; Weenink, Jan-Willem; Winters, Sjenny; Robben, Paul B M; Westert, Gert P; Kool, Rudolf B

2015-11-25

It is known that doctors who receive complaints may have feelings of anger, guilt, shame and depression, both in the short and in the long term. This might lead to functional impairment. Less is known about the impact of the disciplinary process and imposed measures. Previous studies of disciplinary proceedings have mainly focused on identifying characteristics of disciplined doctors and on sentencing policies. Therefore, the aim of this study is to explore what impact the disciplinary process and imposed measures have on healthcare professionals. Semistructured interview study, with purposive sampling and inductive qualitative content analysis. 16 healthcare professionals (9 medical specialists, 3 general practitioners, 2 physiotherapists and 2 psychologists) that were sanctioned by the disciplinary tribunal. The Netherlands. Professionals described feelings of misery and insecurity both during the process as in its aftermath. Furthermore, they reported to fear receiving new complaints and provide care more cautiously after the imposed measure. Factors that may enhance psychological and professional impact are the publication of measures online and in newspapers, media coverage, the feeling of treated as guilty before any verdict has been reached, and the long duration of the process. This study shows that the disciplinary process and imposed measures can have a profound psychological and professional impact on healthcare professionals. Although a disciplinary measure is meant to have a corrective effect, our results suggest that the impact that is experienced by professionals might hamper optimal rehabilitation afterwards. Therefore, organising emotional support should be considered during the disciplinary process and in the period after the verdict. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

The effects of problem content and scientific background on information search and the assessment and valuation of correlations.

Science.gov (United States)

Soffer, Shira; Kareev, Yaakov

2011-01-01

The effects of problem contents and one's scientific background on the detection of correlations and the assessment of their strength were studied using a task that required active data search, assessment of the strength of a correlation, and monetary valuation of the correlation's predictive utility. Participants (N = 72) who were trained either in the natural sciences or in the social sciences and humanities explored data sets differing in contents and actual strength of correlation. Data search was consistent across all variables: Participants drew relatively small samples whose relative sizes would favor the detection of a correlation, if one existed. In contrast, the assessment of the correlation strength and the valuation of its predictive utility were strongly related not only to its objective strength, but also to the correspondence between problem contents and one's scientific background: When the two matched, correlations were judged to be stronger and more valuable than when they did not.

Chain Ends and the Ultimate Tensile Strength of Polyethylene Fibers

Science.gov (United States)

O'Connor, Thomas C.; Robbins, Mark O.

Determining the tensile yield mechanisms of oriented polymer fibers remains a challenging problem in polymer mechanics. By maximizing the alignment and crystallinity of polyethylene (PE) fibers, tensile strengths σ ~ 6 - 7 GPa have been achieved. While impressive, first-principal calculations predict carbon backbone bonds would allow strengths four times higher (σ ~ 20 GPa) before breaking. The reduction in strength is caused by crystal defects like chain ends, which allow fibers to yield by chain slip in addition to bond breaking. We use large scale molecular dynamics (MD) simulations to determine the tensile yield mechanism of orthorhombic PE crystals with finite chains spanning 102 -104 carbons in length. The yield stress σy saturates for long chains at ~ 6 . 3 GPa, agreeing well with experiments. Chains do not break but always yield by slip, after nucleation of 1D dislocations at chain ends. Dislocations are accurately described by a Frenkel-Kontorova model, parametrized by the mechanical properties of an ideal crystal. We compute a dislocation core size ξ = 25 . 24 Å and determine the high and low strain rate limits of σy. Our results suggest characterizing such 1D dislocations is an efficient method for predicting fiber strength. This research was performed within the Center for Materials in Extreme Dynamic Environments (CMEDE) under the Hopkins Extreme Materials Institute at Johns Hopkins University. Financial support was provided by Grant W911NF-12-2-0022.

High strength H2S resistant steels and alloys for oil field tubular products

International Nuclear Information System (INIS)

Straatmann, J.A.; Grobner, P.J.

1976-01-01

New sources of oil and natural gas are more frequently occurring at greater depths in hostile surface and underground environments. The materials utilized in drilling and completing the wells require higher strength along with improved resistance to corrosive/embrittling attack by contaminants present in the deep, high pressure-high temperature formations. Higher strength steels having yield strengths in excess of 690 MPa and possessing improved resistance to sulfide stress corrosion cracking (SSC) have been developed and are currently being evaluated by the oil industry. The research to develop these new steels combined modifications of chemical compositions, heat treatment and processing variables. For most severe SSC environments and deep wells, it was necessary to provide even better alloys for tubular materials. The successful solution to the problem was found with the utilization of nickel-base alloys. These materials are being evaluated in commercial applications

Solving an inverse eigenvalue problem with triple constraints on eigenvalues, singular values, and diagonal elements

Science.gov (United States)

Wu, Sheng-Jhih; Chu, Moody T.

2017-08-01

An inverse eigenvalue problem usually entails two constraints, one conditioned upon the spectrum and the other on the structure. This paper investigates the problem where triple constraints of eigenvalues, singular values, and diagonal entries are imposed simultaneously. An approach combining an eclectic mix of skills from differential geometry, optimization theory, and analytic gradient flow is employed to prove the solvability of such a problem. The result generalizes the classical Mirsky, Sing-Thompson, and Weyl-Horn theorems concerning the respective majorization relationships between any two of the arrays of main diagonal entries, eigenvalues, and singular values. The existence theory fills a gap in the classical matrix theory. The problem might find applications in wireless communication and quantum information science. The technique employed can be implemented as a first-step numerical method for constructing the matrix. With slight modification, the approach might be used to explore similar types of inverse problems where the prescribed entries are at general locations.

Solving an inverse eigenvalue problem with triple constraints on eigenvalues, singular values, and diagonal elements

International Nuclear Information System (INIS)

Wu, Sheng-Jhih; Chu, Moody T

2017-01-01

An inverse eigenvalue problem usually entails two constraints, one conditioned upon the spectrum and the other on the structure. This paper investigates the problem where triple constraints of eigenvalues, singular values, and diagonal entries are imposed simultaneously. An approach combining an eclectic mix of skills from differential geometry, optimization theory, and analytic gradient flow is employed to prove the solvability of such a problem. The result generalizes the classical Mirsky, Sing–Thompson, and Weyl-Horn theorems concerning the respective majorization relationships between any two of the arrays of main diagonal entries, eigenvalues, and singular values. The existence theory fills a gap in the classical matrix theory. The problem might find applications in wireless communication and quantum information science. The technique employed can be implemented as a first-step numerical method for constructing the matrix. With slight modification, the approach might be used to explore similar types of inverse problems where the prescribed entries are at general locations. (paper)

TO THE SOLUTION OF PROBLEMS ABOUT THE RAILWAYS CALCULATION FOR STRENGTH TAKING INTO ACCOUNT UNEQUAL ELASTICITY OF THE SUBRAIL BASE

Directory of Open Access Journals (Sweden)

D. M. Kurhan

2014-11-01

Full Text Available Purpose. The module of elasticity of the subrail base is one of the main characteristics for an assessment intense the deformed condition of a track. Need for different cases to consider unequal elasticity of the subrail base repeatedly was considered, however, results contained rather difficult mathematical approaches and the obtained decisions didn't keep within borders of standard engineering calculation of a railway on strength. Therefore the purpose of this work is obtaining the decision within this document. Methodology. It is offered to consider a rail model as a beam which has the distributed loading of such outline corresponding to value of the module of elasticity that gives an equivalent deflection at free seating on bearing parts. Findings. The method of the accounting of gradual change of the module of elasticity of the subrail base by means of the correcting coefficient in engineering calculation of a way on strength was received. Expansion of existing calculation of railways strength was developed for the accounting of sharp change of the module of elasticity of the subrail base (for example, upon transition from a ballast design of a way on the bridge. The characteristic of change of forces operating from a rail on a basis, depending on distance to the bridge on an approach site from a ballast design of a way was received. The results of the redistribution of forces after a sudden change in the elastic modulus of the base under the rail explain the formation of vertical irregularities before the bridge. Originality. The technique of engineering calculation of railways strength for performance of calculations taking into account unequal elasticity of the subrail base was improved. Practical value. The obtained results allow carrying out engineering calculations for an assessment of strength of a railway in places of unequal elasticity caused by a condition of a way or features of a design. The solution of the return task on

Analysis of lifetime and residual strength of wood

DEFF Research Database (Denmark)

Nielsen, Lauge Fuglsang

1997-01-01

The present paper is thought of as a working paper for the CTBA-seminar on Thematic network in the field for reliability based design of timber structures, Topic: Numerical methods for structural analysis. It is preliminary and quite informal in its structure. The intention is to present some wood...... technological problems which can be solved with respect to lifetime and residual strength by the so-called DVM-theory (Damaged Viscoelastic Material). The outlines of the paper is straight on: Expressions are presented by which the analysis is made. then some examples are considered with solutions presented...

Large diameter femoral heads impose significant alterations on the strains developed on femoral component and bone: a finite element analysis.

Science.gov (United States)

Theodorou, E G; Provatidis, C G; Babis, G C; Georgiou, C S; Megas, P D

2011-01-01

Total Hip Arthroplasty aims at fully recreating a functional hip joint. Over the past years modular implant systems have become common practice and are widely used, due to the surgical options they provide. In addition Big Femoral Heads have also been implemented in the process, providing more flexibility for the surgeon. The current study aims at investigating the effects that femoral heads of bigger diameter may impose on the mechanical behavior of the bone-implant assembly. Using data acquired by Computed Tomographies and a Coordinate Measurement Machine, a cadaveric femur and a Profemur-E modular stem were fully digitized, leading to a three dimensional finite element model in ANSYS Workbench. Strains and stresses were then calculated, focusing on areas of clinical interest, based on Gruen zones: the calcar and the corresponding below the greater trochanter area in the proximal femur, the stem tip region and a profile line along linea aspera. The performed finite elements analysis revealed that the use of large diameter heads produces significant changes in strain development within the bone volume, especially in the lateral side. The application of Frost's law in bone remodeling, validated the hypothesis that for all diameters normal bone growth occurs. However, in the calcar area lower strain values were recorded, when comparing with the reference model featuring a 28mm femoral head. Along line aspera and for the stem tip area, higher values were recorded. Finally, stresses calculated on the modular neck revealed increased values, but without reaching the yield strength of the titanium alloy used.

CHILES, Singularity Strength of Linear Elastic Bodies by Finite Elements Method

International Nuclear Information System (INIS)

Benzley, S.E.; Beisinger, Z.E.

1981-01-01

1 - Description of problem or function: CHILES is a finite element computer program that calculates the strength of singularities in linear elastic bodies. Plane stress, plane strain, and axisymmetric conditions are treated. Crack tip singularity problems are solved by this version of the code, but any type of integrable singularity may be properly modeled by modifying selected subroutines in the program. 2 - Method of solution: A generalized, quadrilateral finite element that includes a singular point at a corner node is incorporated in the code. The displacement formulation is used and inter-element compatibility is maintained so that monotone convergence is preserved. 3 - Restrictions on the complexity of the problem: CHILES allows three singular points to be modeled in the body being analyzed and each singular point may have coupled Mode I and II deformations. 1000 nodal points may be used

Corrosion problems in boiling water reactors and their remedies

International Nuclear Information System (INIS)

Rosborg, B.

1989-01-01

This article briefly presents current corrosion problems in boiling water reactors and their remedies. The problems are different forms of environmentally assisted cracking, and the remedies are divided into material-, environment-, and stress-related remedies. The list of problems comprises: intergranular stress corrosion cracking (IGSCC) in weld-sensitized stainless steel piping; IGSCC in cold-bent stainless steel piping; irradiation-assisted stress corrosion cracking (IASCC) in stainless alloys; IGSCC in high-strength stainless alloys. A prospective corrosion problem, as judged from literature references, and one which relates to plant life, is corrosion fatigue in pressure vessel steel, since the reactor pressure vessel is the most critical component in the BWR pressure boundary as regards plant safety. (author)

Isometric shoulder strength in young swimmers.

Science.gov (United States)

McLaine, Sally J; Ginn, Karen A; Fell, James W; Bird, Marie-Louise

2018-01-01

The prevalence of shoulder pain in young swimmers is high. Shoulder rotation strength and the ratio of internal to external rotation strength have been reported as potential modifiable risk factors associated with shoulder pain. However, relative strength measures in elevated positions, which include flexion and extension, have not been established for the young swimmer. The aim of this study was to establish clinically useful, normative shoulder strength measures and ratios for swimmers (14-20 years) without shoulder pain. Cross-sectional, observational study. Swimmers (N=85) without a recent history of shoulder pain underwent strength testing of shoulder flexion and extension (in 140° abduction); and internal and external rotation (in 90° abduction). Strength tests were performed in supine using a hand-held dynamometer and values normalised to body weight. Descriptive statistics were calculated for strength and strength ratios (flexion:extension and internal:external rotation). Differences between groups (based on gender, history of pain, test and arm dominance) were explored using independent and paired t tests. Normative shoulder strength values and ratios were established for young swimmers. There was a significant difference (pdifferences in strength ratios. Relative strength of the dominant and non-dominant shoulders (except for extension); and for swimmers with and without a history of shoulder pain was not significantly different. A normal shoulder strength profile for the young swimmer has been established which provides a valuable reference for the clinician assessing shoulder strength in this population. Copyright © 2017 Sports Medicine Australia. Published by Elsevier Ltd. All rights reserved.

Design and strength evaluation of structural joint made by electro-magnetic forming (EMF)

International Nuclear Information System (INIS)

Park, Young-Bae; Oh, Soo-Ik; Kim, Heon-Young

2004-01-01

Recently, weight reduction of vehicles has been of great interest, and consequently, the use of low-density materials in the automotive industry is increasing every year. Materials should not be substituted such a way that material of component parts is simply changed because there is a problem in achieving stiffness and strength. To achieve these requirements, the automobile should be redesigned totally. Aluminum spaceframe is rapidly being adopted as a body structure for accommodating lightness, stiffness and strength requirement. In aluminum spaceframe manufacturing, it is often required to join aluminum tube. But there are few suitable methods for joining aluminum tube, so that much interest has been focused on testing suitable joining methods. Joining by electromagnetic forming(EMF) can be useful method in joining aluminum tube, which offers some advantages compared with the conventional joining method. In this paper, joining by EMF was investigated as a pre-study for applying an automotive spaceframe. Finite element simulations and strength tests were performed to analyze the influence of geometric parameters on joint strength. Based on these results, configurations of axial joint and torque joint were suggested and guidelines for designing EMF joint were established

Grading Homework to Emphasize Problem-Solving Process Skills

Science.gov (United States)

Harper, Kathleen A.

2012-01-01

This article describes a grading approach that encourages students to employ particular problem-solving skills. Some strengths of this method, called "process-based grading," are that it is easy to implement, requires minimal time to grade, and can be used in conjunction with either an online homework delivery system or paper-based homework.

Strength improvement of fibre cement product

Directory of Open Access Journals (Sweden)

Waranya Sonphuak

2013-10-01

Full Text Available This paper presents a methodology to improve the strength or the Modulus of Rupture (MOR of fibre cement. The Six Sigma approach with the DMAIC steps was applied to a case study company. This research started from defining problem, setting the project objective and the project scope. Next, the measurement system was analyzed and the process map was set up. The potential factors of the problem was then determined. Due to there were many factors that affect the MOR, the Cause and Effect Matrix and the Failure Mode and Effect Analysis technique were then used to reduce the number of factors to be studied further. Next, three process factors, which were the pulp slurry freeness, the film-layer thickness, and the pressure step, were optimized using the results from the Box-Behnken experimental design. Other 13 remaining factors were improved by creating or revising the standard work instructions and training the operators. After that, the statistical process control and the control plan were set up to control the production processes. After improvement, the process capability index (Ppk significantly increased from 0.26 to 1.35.

High-Strength Aluminium Alloys and Their Use in Foundry Industry of Nickel Superalloys

Directory of Open Access Journals (Sweden)

Pysz S.

2014-08-01

Full Text Available Of great importance in the selection of materials for cast structures is keeping a proper balance between the mechanical and plastic properties, while preserving the relevant casting properties. This study has been devoted to an analysis of the choice and application of high-strength aluminium-based alloys maintaining sufficient level of casting properties. The high level of tensile strength (Rm > 500 MPa matched with satisfactory elongation (A > 3% is important because materials of this type are used for cast parts operating in the aerospace, automotive, and military industries. These beneficial relationships between the high tensile strength and toughness are relatively easy to obtain in the Al-Zn-Mg-Cu alloys subjected to plastic forming and proper heat treatment. In gravity cast products, on the other hand, whether poured into sand moulds or metal moulds (dies, obtaining this favourable combination of properties poses a number of research problems (mostly resulting from the alloy chemical composition as well as technical and technological difficulties.

The effect of pretreatment with fluoride on the tensile strength of orthodontic bonding

International Nuclear Information System (INIS)

Wang, W.N.; Sheen, D.H.

1991-01-01

White spot decalcifications and caries occurring adjacent to bonded orthodontic brackets have long been a concern to orthodontists. One procedure suggested to overcome this problem is fluoride treatment prior to bonding. The purpose of this study was to compare the tensile bond strength of orthodontic self-cured resin from Concise on teeth rinsed 4 minutes in 1.23% APF with untreated controls. Measurements were made on an Instron machine. Debonding interfaces were observed with a scanning electron microscope and energy dispersive x-ray spectrometry. Distributions were calculated. The tensile bond strengths of the fluoride-treated teeth and the untreated teeth were not significantly different. The debonding interfaces between resin and bracket base, within the resin itself, and between enamel and resin were similar in the two experimental groups. However, greater enamel detachment was seen within the fluoride pretreatment group. So while fluoride pretreatment does not significantly affect tensile bond strength, it may cause enamel detachment after debonding

At-home resistance tubing strength training increases shoulder strength in the trained and untrained limb.

Science.gov (United States)

Magnus, C R A; Boychuk, K; Kim, S Y; Farthing, J P

2014-06-01

The purpose was to determine if an at-home resistance tubing strength training program on one shoulder (that is commonly used in rehabilitation settings) would produce increases in strength in the trained and untrained shoulders via cross-education. Twenty-three participants were randomized to TRAIN (strength-trained one shoulder; n = 13) or CONTROL (no intervention; n = 10). Strength training was completed at home using resistance tubing and consisted of maximal shoulder external rotation, internal rotation, scaption, retraction, and flexion 3 days/week for 4 weeks. Strength was measured via handheld dynamometry and muscle size measured via ultrasound. For external rotation strength, the trained (10.9 ± 10.9%) and untrained (12.7 ± 9.6%) arm of TRAIN was significantly different than CONTROL (1.6 ± 13.2%; -2.7 ± 12.3%; pooled across arm; P tubing training program on one limb can produce increases in strength in both limbs, and has implications for rehabilitation after unilateral shoulder injuries. © 2013 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Effect of Different Saliva Decontamination Procedures on Bond Strength to Dentin in Single Bottle Systems

Directory of Open Access Journals (Sweden)

M. Ghavam

2004-09-01

Full Text Available Statement of Problem: Following the increasing use of composites in restoring anterior and posterior teeth, problems due to its technique sensitivity have become a major concern.One of these problems is the possibility of contamination of dentin with saliva, blood and/or gingival fluid in different stages of bonding procedure, even with application of different methods of isolation. However, by introduction of Single-bottle dentin adhesives,the contamination possibility reduced to two stages. Scientific documents show that saliva contamination reduces bond strength of composites to dentin. Application of simple and efficient methods for reducing or eliminating saliva contamination enables clinicians to carry out dental treatment without any concern about deterioration of clinical longevity of restoration.Purpose: This study was designed to compare the effect of different decontamination methods on the shear bond strength of composite to dentin using a “Single-bottle” adhesive.Materials and Methods: Seventy-two extracted sound human molars and premolars were selected. Enamel of buccal surface was ground flat to expose dentin. The teeth were divided into 9 groups of 8 each. In control group (1 the adhesive “Excite” was used according tothe manufacturer, without any contamination. Conditioned and saliva contaminated dentin was (2 rinsed and blot dried, (3 rinsed, dried and re-etched. In groups 4, 5, 6 uncured adhesive was saliva contaminated and then: (4 only blot dried (5 rinsed, blot dried with adhesive reapplication and (6 resurfaced with bur, rinsed, dried and followed by repeating the whole process. In groups 7, 8, 9 cured adhesive was contaminated with saliva and then:(7 rinsed and dried (8 rinsed, blot dried with adhesive reapplication (9 same as group (6.Then “Tetric Ceram” composite cylinders were bonded to dentin surfaces. Samples were thermo cycled in 5°C and 55°C water, 30 seconds in each bath with a dowel time of 10

Strength Characteristics of Quarry Dust in Replacement of Sand

Science.gov (United States)

Shyam Prakash, K.; Hanumantha Rao, Ch, Dr

2017-08-01

The replacement of natural fine aggregate by using quarry dust leads to consumption of generated quarry dust, the requirement of land fill area can be reduced and solves the natural sand scarcity problem. The sand availability as a fine aggregate at low cost which needs the reason to search as a alternative material. Even it causes saddle to dump the crusher dust at one place which causes environmental pollution. The chemical analysis, specific gravity, sieve analysis and compressive strength is identified for various percentage and grades of concrete by replacement of sand with quarry dust.

Optimization design of hydroturbine rotors according to the efficiency-strength criteria

Science.gov (United States)

Bannikov, D. V.; Yesipov, D. V.; Cherny, S. G.; Chirkov, D. V.

2010-12-01

The hydroturbine runner designing [1] is optimized by efficient methods for calculation of head loss in entire flow-through part of the turbine and deformation state of the blade. Energy losses are found at modelling of the spatial turbulent flow and engineering semi-empirical formulae. State of deformation is determined from the solution of the linear problem of elasticity for the isolated blade at hydrodynamic pressure with the method of boundary elements. With the use of the proposed system, the problem of the turbine runner design with the capacity of 640 MW providing the preset dependence of efficiency on the turbine work mode (efficiency criterion) is solved. The arising stresses do not exceed the critical value (strength criterion).

Microstructure and mechanical characterization of friction stir welded high strength low alloy steels

Energy Technology Data Exchange (ETDEWEB)

Ramesh, R., E-mail: rameshsmit@gmail.com [Department of Mechanical Engineering, PSG College of Technology, Coimbatore 641004, Tamilnadu (India); Dinaharan, I., E-mail: dinaweld2009@gmail.com [Department of Mechanical Engineering Science, University of Johannesburg, Auckland Park Kingsway Campus, Johannesburg 2006, Gauteng (South Africa); Kumar, Ravi, E-mail: nvrk@iitm.ac.in [Department of Metallurgical and Materials Engineering, Indian Institute of Technology Madras, Chennai 600036, Tamilnadu (India); Akinlabi, E.T., E-mail: etakinlabi@uj.ac.za [Department of Mechanical Engineering Science, University of Johannesburg, Auckland Park Kingsway Campus, Johannesburg 2006, Gauteng (South Africa)

2017-02-27

Friction stir welding (FSW) is a promising technique to join HSLA steels without the problems encountered during fusion based welding processes. In the present work, 3 mm thick HSLA plates were successfully welded using FSW. A tool made of tungsten-rhenium alloy was used in this work. The relationship between microstructure and tensile strength was studied under various welding conditions i.e. change in traverse speed (57–97 mm/min). The microstructure of the weld nugget revealed the presence of upper bainite and fine ferrite phases. The amount of upper bainite reduced with increase in traverse speed. EBSD images showed a reducing trend for grain size. The details of hardness, tensile strength and bending test were reported.

Microstructure and mechanical characterization of friction stir welded high strength low alloy steels

International Nuclear Information System (INIS)

Ramesh, R.; Dinaharan, I.; Kumar, Ravi; Akinlabi, E.T.

2017-01-01

Friction stir welding (FSW) is a promising technique to join HSLA steels without the problems encountered during fusion based welding processes. In the present work, 3 mm thick HSLA plates were successfully welded using FSW. A tool made of tungsten-rhenium alloy was used in this work. The relationship between microstructure and tensile strength was studied under various welding conditions i.e. change in traverse speed (57–97 mm/min). The microstructure of the weld nugget revealed the presence of upper bainite and fine ferrite phases. The amount of upper bainite reduced with increase in traverse speed. EBSD images showed a reducing trend for grain size. The details of hardness, tensile strength and bending test were reported.

The world food problem

Energy Technology Data Exchange (ETDEWEB)

Olson, R A

1974-07-01

Argument continues in the world press as to the urgency of the food problem. Some economists in equating world food production statistics with population figures have convinced themselves there is more than enough food per capita and, accordingly, no problem. Looking in greater depth than these gross averages, however, we find that there is indeed a prospective problem, and of such a nature and magnitude as to tax all of mankind's talents and resources in its resolution. It is true that certain of the developed countries of the world in the last generation acquired agricultural production capabilities that notably exceeded the resident population's capacity to consume. 'Surplus' in these areas became an ugly word during this period of a generally favorable weather cycle, and restrictions on the amount of and that could be devoted to graincrops were imposed to curb this tremendous capacity. A fickle Mother Nature, however, has turned things around during the early 1970's by one or another of her many vacillations in the form of local drought, excess moisture, shortened growing season, or other means, in some of the major producing areas. Inconsequence, the food grain surpluses are now gone and the world is looking at a three to four week reserve at any given moment. The cost of food products available from exporting countries has doubled and trebled in price during the past two years. The potential for famine exceeds in magnitude anything the world has ever known. It is against this background that the World Food Conference will be held in Rome during November of this year. (author)

The world food problem

International Nuclear Information System (INIS)

Olson, R.A.

1974-01-01

Argument continues in the world press as to the urgency of the food problem. Some economists in equating world food production statistics with population figures have convinced themselves there is more than enough food per capita and, accordingly, no problem. Looking in greater depth than these gross averages, however, we find that there is indeed a prospective problem, and of such a nature and magnitude as to tax all of mankind's talents and resources in its resolution. It is true that certain of the developed countries of the world in the last generation acquired agricultural production capabilities that notably exceeded the resident population's capacity to consume. 'Surplus' in these areas became an ugly word during this period of a generally favorable weather cycle, and restrictions on the amount of and that could be devoted to graincrops were imposed to curb this tremendous capacity. A fickle Mother Nature, however, has turned things around during the early 1970's by one or another of her many vacillations in the form of local drought, excess moisture, shortened growing season, or other means, in some of the major producing areas. Inconsequence, the food grain surpluses are now gone and the world is looking at a three to four week reserve at any given moment. The cost of food products available from exporting countries has doubled and trebled in price during the past two years. The potential for famine exceeds in magnitude anything the world has ever known. It is against this background that the World Food Conference will be held in Rome during November of this year. (author)

The Strengths Assessment Inventory: Reliability of a New Measure of Psychosocial Strengths for Youth

Science.gov (United States)

Brazeau, James N.; Teatero, Missy L.; Rawana, Edward P.; Brownlee, Keith; Blanchette, Loretta R.

2012-01-01

A new measure, the Strengths Assessment Inventory-Youth self-report (SAI-Y), was recently developed to assess the strengths of children and adolescents between the ages of 10 and 18 years. The SAI-Y differs from similar measures in that it provides a comprehensive assessment of strengths that are intrinsic to the individual as well as strengths…

Relationship between Discordance in Parental Monitoring and Behavioral Problems among Chilean Adolescents

Science.gov (United States)

Han, Yoonsun; Grogan-Kaylor, Andrew; Bares, Cristina; Ma, Julie; Castillo, Marcela; Delva, Jorge

2012-01-01

This study investigated the role of discrepancies between parent and youth reports of perceived parental monitoring in adolescent problem behaviors with a Chilean sample (N= 850). Higher levels of discordance concerning parental monitoring predicted greater levels of maladaptive youth behaviors. A positive association between parent-youth discordance and externalizing problems indicated that large adult-youth disagreement in parental monitoring may impose a great risk, despite protective efforts of parental monitoring. Although the direct relationship between parental monitoring and youth internalizing behaviors was not significant, parent-youth incongruence in monitoring was associated with greater levels of internalizing behaviors. Therefore, differing assessments of parental behaviors, as an indicator of less optimal family functioning, may provide important information about youth maladjustment and may potentially provide a beginning point for family-focused intervention. PMID:23097593

Penalty methods for the numerical solution of American multi-asset option problems

Science.gov (United States)

Nielsen, Bjørn Fredrik; Skavhaug, Ola; Tveito, Aslak

2008-12-01

We derive and analyze a penalty method for solving American multi-asset option problems. A small, non-linear penalty term is added to the Black-Scholes equation. This approach gives a fixed solution domain, removing the free and moving boundary imposed by the early exercise feature of the contract. Explicit, implicit and semi-implicit finite difference schemes are derived, and in the case of independent assets, we prove that the approximate option prices satisfy some basic properties of the American option problem. Several numerical experiments are carried out in order to investigate the performance of the schemes. We give examples indicating that our results are sharp. Finally, the experiments indicate that in the case of correlated underlying assets, the same properties are valid as in the independent case.

Effects of Experimentally Imposed Noise on Task Performance of Black Children Attending Day Care Centers Near Elevated Subway Trains.

Science.gov (United States)

Hambrick-Dixon, Priscilla Janet

1986-01-01

Investigates whether an experimentally imposed 80dB (A) noise affected psychomotor, serial memory words and pictures, incidental memory, visual recall, paired associates, perceptual learning, and coding performance of five-year-old Black children attending day care centers near and far from elevated subways. (HOD)

Tensile and fatigue strength properties of Kevlar 29 aramid/epoxy unidirectional composites

Energy Technology Data Exchange (ETDEWEB)

Zweben, C.

1981-07-22

Static and fatigue tensile strength properties of filament wound undirectional Kevlar 29/epoxy, typical of filament wound material used in flywheel rotors, were studied. Machining techniques were developed to minimize fiber fuzzing on edges. The static modulus, normalized to 70% fiber volume fraction is 8.87 x 10/sup 6/ psi. The major Poisson's ratio is 0.37. The static composite tensile strength, normalized to 70% fiber volume fraction is 200 x 10/sup 3/ psi, corresponding to a fiber stress at failure of 286 x 10/sup 3/ psi, which is good for materials having a very high fiber volume fraction. The S-N curve for R = 0.7 was found to be quite flat. Although the techniques used in this program had previously been employed successfully to study the fatigue behavior of Kevlar 29/epoxy and Kevlar 49/epoxy unidirectional materials, we were unable to overcome the persistent problem of cohesive material failure in the tab regions. The apparent reason for this is the very low interlaminar shear strength of the filament wound material. 16 figures.

Effects of strength training, detraining and retraining in muscle strength, hypertrophy and functional tasks in older female adults.

Science.gov (United States)

Correa, Cleiton S; Cunha, Giovani; Marques, Nise; Oliveira-Reischak, Ãlvaro; Pinto, Ronei

2016-07-01

Previous studies presented different results regarding the maintenance time of muscular adaptations after strength training and the ability to resume the gains on muscular performance after resumption of the training programme. This study aimed to verify the effect of strength training on knee extensors and elbow flexor muscle strength, rectus femoris muscle volume and functional performance in older female adults after 12 weeks of strength training, 1 year of detraining and followed by 12 weeks of retraining. Twelve sedentary older women performed 12 weeks of strength training, 1 year of detraining and 12 weeks of retraining. The strength training was performed twice a week, and the assessment was made four times: at the baseline, after the strength training, after the detraining and after the retraining. The knee extensor and elbow flexor strength, rectus femoris muscle volume and functional task were assessed. Strength of knee extensor and elbow flexor muscles, rectus femoris muscle volume and 30-s sit-to-stand increased from baseline to post-training (respectively, 40%, 70%, 38% and 46%), decreased after detraining (respectively, -36%, -64%, -35% and -43%) and increased again these parameters after retraining (35%, 68%, 36% and 42%). Strength training induces gains on strength and hypertrophy, also increased the performance on functional tasks after the strength training. The stoppage of the strength caused strength loss and reduction of functional performance. The resumption of the strength training promoted the same gains of muscular performance in older female adults. © 2015 Scandinavian Society of Clinical Physiology and Nuclear Medicine. Published by John Wiley & Sons Ltd.

Percentage Level of Tannin fur Rabbit for Leather Concerning Stitch Tearing Strength, Tearing Strength and Flexibility

Directory of Open Access Journals (Sweden)

Mustakim Mustakim

2012-02-01

Full Text Available The purpose of this study was to find out the appropriate of tannin level for rabbit fur leather concerning stitch tearing strength, tearing strength, and flexibility. The result were expected to contribute good information for the society, leather craftsman, and further researchers about fur leather tanning especially rabbit fur leather with tannin concerning stitch tearing strength, tearing strength and flexibility. The material that used were 12 pieces of four months of rabbit skin. The research method was Completely Randomized Design, consist of three treatments of tannin, they were: M1 (mimosa 15%, M2 (mimosa 20%, and M3 (mimosa 25%. Each of treatment hold on four repetition, the variables which measured were stitch tearing strength, tearing strength, and flexibility of fur leather. Data were  analysed by analysis variance followed by Duncan’s Multiple Range Test. The result of this research indicate that the use level of tannin give significant influence (P<0.05 among stitch tearing strength, tearing strength. It gave a very significant influence (P<0.01 for flexibility of rabbit fur leather. Based on the result, can be concluded that 25 % of tannin (mimosa, produce the best  result on stitch tearing strength and tearing strength. The increase of tannin offer will decrease the flexibility of fur leather but the lowest tannin produced the best flexibility of fur leather (15 percent. The best quality of rabbit fur leather produced by 25 % of tannin.   Keywords : leather, tannin, quality

The numerical solution of boundary value problems over an infinite domain

International Nuclear Information System (INIS)

Shepherd, M.; Skinner, R.

1976-01-01

A method is presented for the numerical solution of boundary value problems over infinite domains. An example that illustrates also the strength and accuracy of a numerical procedure for calculating Green's functions is described in detail

The assessment of bond strength between heat damaged concrete and high strength fibre reinforced concrete

Science.gov (United States)

Zahid, M. Z. A. Mohd; Muhamad, K.

2017-09-01

The aim of this study is to assess the bond strength between heat damaged concrete and high strength fibre reinforced concrete (HPFRC). Firstly, this paper presents the various steps taken to prepare the HPFRC with self-compacting property. The minimum targeted slump flow is 600 mm and minimum targeted compressive strength is 80 MPa. The key mix variables considered are such as type of superplasticizer, water cement ratio and silica fume content. Then, the bond strength between the heat damaged concrete with HPFRC was examined. The experimental parameters are heating temperature, surface treatment technique and curing method and the results show that, all experimental parameters are significantly affected the bond strength between heat damaged concrete and HPFRC.

Automatic Mitigation of Sensor Variations for Signal Strength Based Location Systems

DEFF Research Database (Denmark)

Kjærgaard, Mikkel Baun

2006-01-01

n the area of pervasive computing a key concept is context-awareness. One type of context information is location information of wireless network clients. Research in indoor localization of wireless network clients based on signal strength is receiving a lot of attention. However, not much...... of this research is directed towards handling the issue of adapting a signal strength based indoor localization system to the hardware and software of a specific wireless network client, be it a tag, PDA or laptop. Therefore current indoor localization systems need to be manually adapted to work optimally...... with specific hardware and software. A second problem is that for a specific hardware there will be more than one driver available and they will have different properties when used for localization. Therefore the contribution of this paper is twofold. First, an automatic system for evaluating the fitness...

Strength verification of tube bundle heat exchangers; Zum Festigkeitsnachweis von Rohrbuendelwaermeuebertragern

Energy Technology Data Exchange (ETDEWEB)

Weiss, E. [Dortmund Univ. (Germany). Chemieapparatebau; Rudolph, J. [TUeV Nord EnSys GmbH und Co. KG, Hannover (Germany)

2006-06-15

For a tube bundle heat exchanger with a solid pipe head with and without compensator, the available analytical calculation methods according to AD 2000, DIN EN 13455 part 3 Sect. 13 and Appendix J are evaluated and compared with a detailed numeric analysis. The latter is based on a combination of 3D-CAD/FEA (Autodesk {sup registered} Inventor and ANSYS {sup registered} Workbench Environment AWE) and permits an assessment of the computing time and validity in strength analyses of a complex coupled system of several components. In particular, it is investigated whether the analytical methods prescribed by the technical rules are capable of focusing on the strength problem in critical parts of the structure. It is shown that CAD-FEA coupling on a workbench basis is closer to this goal but is also more complex (modelling, variants calculation). (orig.)

Assessing the accuracy of subject-specific, muscle-model parameters determined by optimizing to match isometric strength.

Science.gov (United States)

DeSmitt, Holly J; Domire, Zachary J

2016-12-01

Biomechanical models are sensitive to the choice of model parameters. Therefore, determination of accurate subject specific model parameters is important. One approach to generate these parameters is to optimize the values such that the model output will match experimentally measured strength curves. This approach is attractive as it is inexpensive and should provide an excellent match to experimentally measured strength. However, given the problem of muscle redundancy, it is not clear that this approach generates accurate individual muscle forces. The purpose of this investigation is to evaluate this approach using simulated data to enable a direct comparison. It is hypothesized that the optimization approach will be able to recreate accurate muscle model parameters when information from measurable parameters is given. A model of isometric knee extension was developed to simulate a strength curve across a range of knee angles. In order to realistically recreate experimentally measured strength, random noise was added to the modeled strength. Parameters were solved for using a genetic search algorithm. When noise was added to the measurements the strength curve was reasonably recreated. However, the individual muscle model parameters and force curves were far less accurate. Based upon this examination, it is clear that very different sets of model parameters can recreate similar strength curves. Therefore, experimental variation in strength measurements has a significant influence on the results. Given the difficulty in accurately recreating individual muscle parameters, it may be more appropriate to perform simulations with lumped actuators representing similar muscles.

Monitoring and troubleshooting of non-filamentous settling and dewatering problems in an industrial activated sludge treatment plant

DEFF Research Database (Denmark)

Kjellerup, B. V.; Keiding, Kristian; Nielsen, Per Halkjær

2001-01-01

dewaterability. The monitoring program revealed that a deterioration of the floc strength and the settling properties in the process tanks was closely connected to downstream dewatering problems and poor effluent quality. Particularly severe problems were observed a few weeks after the production at the factory......A large industrial activated sludge wastewater treatment plant had temporary problems with settling and dewatering of the sludge. Microscopical investigations revealed that the poor settling properties were not due to presence of filamentous bacteria, but poor floc properties. In order...... to characterise the changes in floc properties that led to settling and dewatering problems and to find reasons for this taking place, a comprehensive monitoring program was conducted during more than one year. The monitoring program included various measurements of floc settleability, floc strength and sludge...

Phenology and carbon dioxide source/sink strength of a subalpine grassland in response to an exceptionally short snow season

International Nuclear Information System (INIS)

Galvagno, M; Cremonese, E; Filippa, G; Morra di Cella, U; Wohlfahrt, G; Rossini, M; Colombo, R; Julitta, T; Manca, G; Siniscalco, C; Migliavacca, M

2013-01-01

Changes in snow cover depth and duration predicted by climate change scenarios are expected to strongly affect high-altitude ecosystem processes. This study investigates the effect of an exceptionally short snow season on the phenology and carbon dioxide source/sink strength of a subalpine grassland. An earlier snowmelt of more than one month caused a considerable advancement (40 days) of the beginning of the carbon uptake period (CUP) and, together with a delayed establishment of the snow season in autumn, contributed to a two-month longer CUP. The combined effect of the shorter snow season and the extended CUP led to an increase of about 100% in annual carbon net uptake. Nevertheless, the unusual environmental conditions imposed by the early snowmelt led to changes in canopy structure and functioning, with a reduction of the carbon sequestration rate during the snow-free period. (letter)

Computational problems in Arctic Research

International Nuclear Information System (INIS)

Petrov, I

2016-01-01

This article is to inform about main problems in the area of Arctic shelf seismic prospecting and exploitation of the Northern Sea Route: simulation of the interaction of different ice formations (icebergs, hummocks, and drifting ice floes) with fixed ice-resistant platforms; simulation of the interaction of icebreakers and ice- class vessels with ice formations; modeling of the impact of the ice formations on the underground pipelines; neutralization of damage for fixed and mobile offshore industrial structures from ice formations; calculation of the strength of the ground pipelines; transportation of hydrocarbons by pipeline; the problem of migration of large ice formations; modeling of the formation of ice hummocks on ice-resistant stationary platform; calculation the stability of fixed platforms; calculation dynamic processes in the water and air of the Arctic with the processing of data and its use to predict the dynamics of ice conditions; simulation of the formation of large icebergs, hummocks, large ice platforms; calculation of ridging in the dynamics of sea ice; direct and inverse problems of seismic prospecting in the Arctic; direct and inverse problems of electromagnetic prospecting of the Arctic. All these problems could be solved by up-to-date numerical methods, for example, using grid-characteristic method. (paper)

Sink strengths of dislocations taking into account bulk recombination effects

International Nuclear Information System (INIS)

Steinbach, E.

1988-01-01

The applicability of the rate theory to describe radiation damage processes is closely associated with the calculation of the various sink strengths. In this connection the effect of bulk recombination is usually neglected, because of the complexity of the problem. For this reason we present in this paper, for the first time, by means of the rigorous elastic-field model of a dislocation embedded in a lossy continuum, analytic expressions for the diffusion flux of irradiation-induced point defects into a dislocation, taking into account the elastic interaction, additional sinks and higher order bulk recombination effects. The resulting self-consistent formulae for the dislocation sink strengths clearly demonstrate the importance of the bulk recombination for the micro-structures of irradiated materials. In conjunction with the Harwell computer code VS5 it became clear that this new dislocation bias also leads to a change in the macrostructural observables. The order of magnitude of this effect emphasizes that neglecting bulk recombination as a general principle is not justified

Heterología. La ciencia (imposible de los residuos violentos

Directory of Open Access Journals (Sweden)

Sergio Tonkonoft

2015-01-01

Full Text Available EI presente trabajo busca mostrar que en la obra de Bataille existe una teoría social general, articulada en torno a la noción de lo sagrado. Nuestra hipótesis es que Bataille profundizó y generalizó d movimiento iniciado por Durkheim, quien postula la sintaxis de lo sagrado arcaico como la parte fundamental de la gramática social, pero interpretando este legado a la luz del concepto de multitud, entendido como el otro nombre de la economía general de las pasiones colectivas. Para dlo, se sirvió de dementos deI psicoanálisis y la fenomenología alemana, produciendo la teoría original dd lazo social, su estructuración y sus dinâmicas, con las que reformuló la idea durkheimniana de lo sagrado y procedió a analizar los malestares de su época. Dada la antropología trágica que enmarcó esta empresa intelectual, resultó de ello la teoría social transgredida o imposible que lleva eI nombre de heterología.

Challenges imposed by International Environmental Law to Classical International Law

Directory of Open Access Journals (Sweden)

Fabian Augusto Cárdenas Castañeda

2010-05-01

Full Text Available The emergence of international environmental law has produced important challenges to the very foundations of public international law. Traditional concepts such as state sovereignty, subjects of international law, and the early perspectives of national security are being transformed. The needs of the contemporary international society differ from the ones of the Wesphalian conception, situations which clearly explains the raise of alternative views for the understanding of the current dynamics of international law, where concepts like res communis, common concerns and simply “commons” take a privileged place in the study of international law. The foregoing has been strengthened by the international development of the so called erga ommnes obligations, label which is being used by international environmental law as the perfect explanation of its own existence. This academic article presents and studies the abovementioned concepts trying to compare what international law used to be before the emergence of international environmental law and what it is and what it should be in order to attend the developments and challenges imposed by the contemporary international society, particularly by international environmental law, a new fi eld of the corpus juris of public international law.

Microshear bond strength of composite resins to enamel and porcelain substrates utilizing unfilled versus filled resins.

Science.gov (United States)

Najafi-Abrandabadi, Ahmad; Najafi-Abrandabadi, Siamak; Ghasemi, Amir; Kotick, Philip G

2014-11-01

Failures such as marginal discoloration and composite chipping are still the problems of tooth-colored restorations on the substrate of enamel and porcelain, which some of these problems are consequently as a result of failures in the bonding layer. Using filled resin has been recently introduced to increase the bond strength of this layer. The aim of this study was to compare the microshear bond strength (μ-SBS) of composite resins to enamel incubated in periods of 24 h and 9 months and porcelain with unfilled resin and flowable composites (filled resin). In this in vitro study, two groups of 75 enamel samples with different storage times (24 h and 9 months) and a group of 75 porcelain samples were used. They were divided into 5 experimental groups of 15 samples in each. Composite cylinders in tygon tubes were bonded on the surface of acid-etched enamel and pretreated porcelain. Wave, Wave MV, Wave HV, Grandioflow and Margin Bond were used as bonding agents. The μ-SBS was measured at the speed of 1.0 mm/min. The bond strengths were analyzed with one-way analysis of variance (ANOVA) test followed by Tukey test. P composites (filled resins) can be used instead of unfilled resins in bonding composite resins to enamel and porcelain substrates.

Determination of high-strength materials diamond grinding rational modes

Science.gov (United States)

Arkhipov, P. V.; Lobanov, D. V.; Rychkov, D. A.; Yanyushkin, A. S.

2018-03-01

The analysis of methods of high-strength materials abrasive processing is carried out. This method made it possible to determine the necessary directions and prospects for the development of shaping combined methods. The need to use metal bonded diamond abrasive tools in combination with a different kind of energy is noted to improve the processing efficiency and reduce the complexity of operations. The complex of experimental research on revealing the importance of mechanical and electrical components of cutting regimes, on the cutting ability of diamond tools, as well as the need to reduce the specific consumption of an abrasive wheel as one of the important economic indicators of the processing process is performed. It is established that combined diamond grinding with simultaneous continuous correction of the abrasive wheel contributes to an increase in the cutting ability of metal bonded diamond abrasive tools when processing high-strength materials by an average of 30% compared to diamond grinding. Particular recommendations on the designation of technological factors are developed depending on specific production problems.

PM alloy 625M for high strength corrosion resistant applications

International Nuclear Information System (INIS)

Rizzo, F.J.; Floreen, S.

1997-06-01

In applications where the combination of high strength and good corrosion resistance are required, there have been only a few alloys of choice. A new powder metallurgy alloy has been developed, PM 625M, a niobium modification of Alloy 625, as a material to fill this need. One area of particular interest is the nuclear power industry, where many problems have been encountered with bolts, springs, and guidepins. Mechanical properties and stress corrosion cracking data of PM 625M are presented in this paper

A Variable Flow Modelling Approach To Military End Strength Planning

Science.gov (United States)

2016-12-01

function. The MLRPS is more complex than the variable flow model as it has to cater for a force structure that is much larger than just the MT branch...essential positions in a Ship’s complement, or by the biggest current deficit in forecast end strength. The model can be adjusted to cater for any of these...is unlikely that the RAN will be able to cater for such an increase in hires, so this scenario is not likely to solve their problem. Each transition

A Study on Factors Affecting Strength of Solidified Peat through XRD and FESEM Analysis

Science.gov (United States)

Rahman, J. A.; Napia, A. M. A.; Nazri, M. A. A.; Mohamed, R. M. S. R.; Al-Geethi, A. S.

2018-04-01

Peat is soft soil that often causes multiple problems to construction. Peat has low shear strength and high deformation characteristics. Thus, peat soil needs to be stabilized or treated. Study on peat stabilization has been conducted for decades with various admixtures and mixing formulations. This project intends to provide an overview of the solidification of peat soil and the factors that affecting the strength of solidified peat soil. Three types of peats which are fabric, hemic and sapric were used in this study to understand the differences on the effect. The understanding of the factors affecting strength of solidified peat in this study is limited to XRD and FESEM analysis only. Peat samples were collected at Pontian, Johor and Parit Raja, Johor. Peat soil was solidified using fly ash, bottom ash and Portland cement with two mixing formulation following literature review. The solidified peat were cured for 7 days, 14 days, 28 days and 56 days. All samples were tested using Unconfined Compressive Strength Test (UCS), X-ray diffraction (XRD) and Field Emission Scanning Electron Microscope (FESEM). The compressive strength test of solidified peat had shown consistently increase of sheer strength, qu for Mixing 1 while decrease of its compressive strength value for Mixing 2. All samples were tested and compared for each curing days. Through XRD, it is found that all solidified peat are dominated with pargasite and richterite. The highest qu is Fabric Mixing 1(FM1) with the value of 105.94 kPa. This sample were proven contain pargasite. Samples with high qu were observed to be having fly ash and bottom ash bound together with the help of pargasite. Sample with decreasing strength showed less amount of pargasite in it. In can be concluded that XRD and FESEM findings are in line with UCS values.

ACTIVE AND PARTICIPATORY METHODS IN BIOLOGY: PROBLEM-SOLVING

Directory of Open Access Journals (Sweden)

Adela NEMEŞ

2010-01-01

Full Text Available We face with considerable challenge of developing students’ problem solving skills in our difficult environment. Good problem solving skills empower managers in their professional and personal lives. Problem solving skills are valued by academics and employers. The informations in Biology are often presented in abstract forms without contextualisation. Creative problem-solving process involves a few steps, which together provide a structured procedure for identifying challenges, generating ideas and implementing innovative solutions: identifying the problem, searching for possible solutions, selecting the most optimal solution and implementing a possible solution. Each aspect of personality has a different orientation to problem solving, different criteria for judging the effectiveness of the process and different associated strengths. Using real-world data in sample problems will also help facilitate the transfer process, since students can more easily identify with the context of a given situation. The paper describes the use of the Problem-Solving in Biology and the method of its administration. It also presents the results of a study undertaken to evaluate the value in teaching Biology. Problem-solving is seen as an essential skill that is developed in biology education.

Accelerated Strength Testing of Thermoplastic Composites

Science.gov (United States)

Reeder, J. R.; Allen, D. H.; Bradley, W. L.

1998-01-01

Constant ramp strength tests on unidirectional thermoplastic composite specimens oriented in the 90 deg. direction were conducted at constant temperatures ranging from 149 C to 232 C. Ramp rates spanning 5 orders of magnitude were tested so that failures occurred in the range from 0.5 sec. to 24 hrs. (0.5 to 100,000 MPa/sec). Below 204 C, time-temperature superposition held allowing strength at longer times to be estimated from strength tests at shorter times but higher temperatures. The data indicated that a 50% drop in strength might be expected for this material when the test time is increased by 9 orders of magnitude. The shift factors derived from compliance data applied well to the strength results. To explain the link between compliance and strength, a viscoelastic fracture model was investigated. The model, which used compliance as input, was found to fit the strength data only if the critical fracture energy was allowed to vary with temperature reduced stress rate. This variation in the critical parameter severely limits its use in developing a robust time-dependent strength model. The significance of this research is therefore seen as providing both the indication that a more versatile acceleration method for strength can be developed and the evidence that such a method is needed.

High strength ferritic alloy

International Nuclear Information System (INIS)

1977-01-01

A high strength ferritic steel is specified in which the major alloying elements are chromium and molybdenum, with smaller quantities of niobium, vanadium, silicon, manganese and carbon. The maximum swelling is specified for various irradiation conditions. Rupture strength is also specified. (U.K.)

Plasma response to sustainment with imposed-dynamo current drive in HIT-SI and HIT-SI3

Science.gov (United States)

Hossack, A. C.; Jarboe, T. R.; Chandra, R. N.; Morgan, K. D.; Sutherland, D. A.; Penna, J. M.; Everson, C. J.; Nelson, B. A.

2017-07-01

The helicity injected torus—steady inductive (HIT-SI) program studies efficient, steady-state current drive for magnetic confinement plasmas using a novel experimental method. Stable, high-beta spheromaks have been sustained using steady, inductive current drive. Externally induced loop voltage and magnetic flux are oscillated together so that helicity and power injection are always positive, sustaining the edge plasma current indefinitely. Imposed-dynamo current drive (IDCD) theory further shows that the entire plasma current is sustained. The method is ideal for low aspect ratio, toroidal geometries with closed flux surfaces. Experimental studies of spheromak plasmas sustained with IDCD have shown stable magnetic profiles with evidence of pressure confinement. New measurements show coherent motion of a stable spheromak in response to the imposed perturbations. On the original device two helicity injectors were mounted on either side of the spheromak and the injected mode spectrum was predominantly n  =  1. Coherent, rigid motion indicates that the spheromak is stable and a lack of plasma-generated n  =  1 energy indicates that the maximum q is maintained below 1 during sustainment. Results from the HIT-SI3 device are also presented. Three inductive helicity injectors are mounted on one side of the spheromak flux conserver. Varying the relative injector phasing changes the injected mode spectrum which includes n  =  2, 3, and higher modes.

Effect of different dispersants in compressive strength of carbon fiber cementitious composites

Science.gov (United States)

Lestari, Yulinda; Bahri, Saiful; Sugiarti, Eni; Ramadhan, Gilang; Akbar, Ari Yustisia; Martides, Erie; Khaerudini, Deni S.

2013-09-01

Carbon Fiber Cementitious Composites (CFCC) is one of the most important materials in smart concrete applications. CFCC should be able to have the piezoresistivity properties where its resistivity changes when there is applied a stress/strain. It must also have the compressive strength qualification. One of the important additives in carbon fiber cementitious composites is dispersant. Dispersion of carbon fiber is one of the key problems in fabricating piezoresistive carbon fiber cementitious composites. In this research, the uses of dispersants are methylcellulose, mixture of defoamer and methylcellulose and superplasticizer based polycarboxylate. The preparation of composite samples is similar as in the mortar technique according to the ASTM C 109/109M standard. The additives material are PAN type carbon fibers, methylcellulose, defoamer and superplasticizer (as water reducer and dispersant). The experimental testing conducts the compressive strength and resistivity at various curing time, i.e. 3, 7 and 28 days. The results obtained that the highest compressive strength value in is for the mortar using superplasticizer based polycarboxylate dispersant. This also shown that the distribution of carbon fiber with superplasticizer is more effective, since not reacting with the cementitious material which was different from the methylcellulose that creates the cement hydration reaction. The research also found that the CFCC require the proper water cement ratio otherwise the compressive strength becomes lower.

Percentage Level of Tannin fur Rabbit for Leather Concerning Stitch Tearing Strength, Tearing Strength and Flexibility

OpenAIRE

Mustakim Mustakim; Aris Sri Widati; Lisa Purnaningtyas

2012-01-01

The purpose of this study was to find out the appropriate of tannin level for rabbit fur leather concerning stitch tearing strength, tearing strength, and flexibility. The result were expected to contribute good information for the society, leather craftsman, and further researchers about fur leather tanning especially rabbit fur leather with tannin concerning stitch tearing strength, tearing strength and flexibility. The material that used were 12 pieces of four months of rabbit skin. The re...

Evaluation of Interface Shear Strength Properties of Geogrid Reinforced Foamed Recycled Glass Using a Large-Scale Direct Shear Testing Apparatus

Directory of Open Access Journals (Sweden)

Arul Arulrajah

2015-01-01

Full Text Available The interface shear strength properties of geogrid reinforced recycled foamed glass (FG were determined using a large-scale direct shear test (DST apparatus. Triaxial geogrid was used as a geogrid reinforcement. The geogrid increases the confinement of FG particles during shear; consequently the geogrid reinforced FG exhibits smaller vertical displacement and dilatancy ratio than FG at the same normal stress. The failure envelope of geogrid reinforced FG, at peak and critical states, coincides and yields a unique linear line possibly attributed to the crushing of FG particles and the rearrangement of crushed FG after peak shear state. The interface shear strength coefficient α is approximately constant at 0.9. This value can be used as the interface parameter for designing a reinforced embankment and mechanically stabilized earth (MSE wall when FG is used as a lightweight backfill and triaxial geogrid is used as an extensible earth reinforcement. This research will enable FG, recently assessed as suitable for lightweight backfills, to be used together with geogrids in a sustainable manner as a lightweight MSE wall. The geogrid carries tensile forces, while FG reduces bearing stresses imposed on the in situ soil. The use of geogrid reinforced FG is thus significant from engineering, economical, and environmental perspectives.

Ionic strength dependence of stability constants, complexation of Molybdenum(V I) with EDTA

International Nuclear Information System (INIS)

Zare, K.; Majlesi, K.; Teimoori, F.

2002-01-01

The stability constant of Mo (Vi) complexes with EDTA in aqueous solution has been determined by various authors using different techniques, but according to literature, no work has been reported on ionic strength dependence of these complexes. The present work describes the complexation of Mo (Vi) with EDTA in an ionic strength range of 0.1 to 1.0 moldm - 3 s odium perchlorate at 25 d ig C . The complexation of molybdenum (Vi) with EDTA was investigated in aqueous solution ranging in ph from 5 to 7 using UV spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum (Vi) forms a 2:1 complex with EDTA of the type (MoO 3 ) 2 L - 4 a t ph =5.5 The parameters that define the dependence on ionic strength were analyzed with the aim of obtaining further information regarding to their variation as a function of the charges involved in the complex reaction. Moreover, a Debye-Huckel type equation makes it possible to estimate a stability constant at a fixed ionic strength when its value is known at another ionic media in the range of 0.1 3 . Therefore the evaluation may make a significant contribution solving many analytical and speciation problems

Numerical methods for coupled fracture problems

Science.gov (United States)

Viesca, Robert C.; Garagash, Dmitry I.

2018-04-01

We consider numerical solutions in which the linear elastic response to an opening- or sliding-mode fracture couples with one or more processes. Classic examples of such problems include traction-free cracks leading to stress singularities or cracks with cohesive-zone strength requirements leading to non-singular stress distributions. These classical problems have characteristic square-root asymptotic behavior for stress, relative displacement, or their derivatives. Prior work has shown that such asymptotics lead to a natural quadrature of the singular integrals at roots of Chebyhsev polynomials of the first, second, third, or fourth kind. We show that such quadratures lead to convenient techniques for interpolation, differentiation, and integration, with the potential for spectral accuracy. We further show that these techniques, with slight amendment, may continue to be used for non-classical problems which lack the classical asymptotic behavior. We consider solutions to example problems of both the classical and non-classical variety (e.g., fluid-driven opening-mode fracture and fault shear rupture driven by thermal weakening), with comparisons to analytical solutions or asymptotes, where available.

Analytic Approximations to the Free Boundary and Multi-dimensional Problems in Financial Derivatives Pricing

Science.gov (United States)

Lau, Chun Sing

This thesis studies two types of problems in financial derivatives pricing. The first type is the free boundary problem, which can be formulated as a partial differential equation (PDE) subject to a set of free boundary condition. Although the functional form of the free boundary condition is given explicitly, the location of the free boundary is unknown and can only be determined implicitly by imposing continuity conditions on the solution. Two specific problems are studied in details, namely the valuation of fixed-rate mortgages and CEV American options. The second type is the multi-dimensional problem, which involves multiple correlated stochastic variables and their governing PDE. One typical problem we focus on is the valuation of basket-spread options, whose underlying asset prices are driven by correlated geometric Brownian motions (GBMs). Analytic approximate solutions are derived for each of these three problems. For each of the two free boundary problems, we propose a parametric moving boundary to approximate the unknown free boundary, so that the original problem transforms into a moving boundary problem which can be solved analytically. The governing parameter of the moving boundary is determined by imposing the first derivative continuity condition on the solution. The analytic form of the solution allows the price and the hedging parameters to be computed very efficiently. When compared against the benchmark finite-difference method, the computational time is significantly reduced without compromising the accuracy. The multi-stage scheme further allows the approximate results to systematically converge to the benchmark results as one recasts the moving boundary into a piecewise smooth continuous function. For the multi-dimensional problem, we generalize the Kirk (1995) approximate two-asset spread option formula to the case of multi-asset basket-spread option. Since the final formula is in closed form, all the hedging parameters can also be derived in

Evaluation of the problems associated with ENEL's irradiated fuel management

International Nuclear Information System (INIS)

Sani, L.; Belelli, U.

1978-01-01

The present difficulties in the reprocessing field, wich will continue for a period of time not easily definable, impose on the nuclear utilities the research of adequate solutions to solve the problem associated with storage of the fuels discharged by the nuclear power stations in operation. In this context, the paper examines the technical aspects of the various possible alternatives and on the basis of the Italian nuclear program, possible storage strategies are discussed in the assumption of the development of an adequate oxide-fuel reprocessing capacity. The problems related to storage in pools at the station or away from reactor are described in the light of the recent experience made in Italy with the adaptation of an old pool reactor out of service, that is, the Avogadro reactor in Saluggia, to store the fuels of the stations now in operation. Finally some economic aspects are considered in order to ascertain their impact on the cost of energy produced. (author)

Some problems in the interpretation of isotope measurements in British aquifers

International Nuclear Information System (INIS)

Evans, G.V.; Otlet, R.L.

1978-01-01

Corrections allowing for the dilution of biogenic carbon in the determination of groundwater age by 14 C measurements are discussed. A reappraisal is made of the procedure used in earlier work (the Lincolnshire Limestone) to allow for dilution during an incongruent stage of dissolution and a new correction formula is derived for groundwaters which have undergone the congruent and incongruent stages of dissolution. The significance of such corrections in relation to other limitations imposed by the mixing of groundwaters of different ages is also discussed. Some of the practical problems encountered are illustrated by groudnwater dating of waters from the Carboniferous Limestone and the Lower Greensand. In the Lower Greensand, for example, the problem is further complicated by uncertainty in the 'rock' carbonate value of delta 13 C which is affected by the presence of both freshwater and marine carbonate cements. (orig.) 891 RB [de

[Loading and strength of single- and multi-unit fixed dental prostheses 2. Strength

NARCIS (Netherlands)

Baat, C. de; Witter, D.J.; Meijers, C.C.A.J.; Vergoossen, E.L.; Creugers, N.H.J.

2014-01-01

The ultimate strength of a dental prosthesis is defined as the strongest loading force applied to the prosthesis until afracture failure occurs. Important key terms are strength, hardness, toughness and fatigue. Relatively prevalent complications of single- and multi-unit fixed dental prostheses are

Building Internal Strength, Sustainable Self-Esteem, and Inner Motivation as a Researcher

Directory of Open Access Journals (Sweden)

Carlos Andres Trujillo

2007-01-01

Full Text Available Having a "normal" professional job and doing research impose different social and personal connotations. These differences materialize at least in two clear ways. First, it is common that researchers in the making find it very difficult to communicate to their closest social network (e.g., family and old close friends the content and the importance of their work, as they lose known sources of social comparison. Meanwhile, professional job titles (e.g., brand manager, auditor, lawyer are self-explanatory, and they provide for the owner an immediate social contextualization and recognition. Second, students normally receive delayed and ambiguous feedback and reinforcement while doing a PhD, contrasting with the continuous flow of assessment that companies give to their employees. In this article, I analyze how young researchers may develop a feeling of social isolation as the communication bridges with family, old friends, and undergraduate colleagues become narrower than before, making it difficult to receive external reinforcement on their social position and comparative achievement. This feeling, combined with the ambiguous feedback during the early stages of a research career, challenges the self-esteem of PhD students, forcing them to develop a self-contained personal security in order to cope with those two social contexts. Some young researchers might even withdraw from PhD programs should they fail to develop such psychological strength. I approach the issue through my own experience, first as a junior consultant in a multinational firm and then as a PhD candidate in economics. Second, I explore the behavioral phenomena that occur beneath those feelings in order to understand how to build such psychological strength. My goal is, through the exploration of my personal experience of becoming a researcher, to offer young researchers a useful narrative to help face the potentially negative feelings that may emerge when learning to balance

The Edge Set Cost of the Vehicle Routing Problem with Time Windows

DEFF Research Database (Denmark)

Reinhardt, Line Blander; Jepsen, Mads Kehlet; Pisinger, David

2016-01-01

. The certifications and investments impose a cost for the company while they also give unlimited usage of a set of roads to all vehicles belonging to the company. This violates the traditional assumption that the path between two destinations is well defined and independent of other choices. Different versions......We consider an important generalization of the vehicle routing problem with time windows in which a fixed cost must be paid for accessing a set of edges. This fixed cost could reflect payment for toll roads, investment in new facilities, the need for certifications, and other costly investments...

Anisotropic Concrete Compressive Strength

DEFF Research Database (Denmark)

Gustenhoff Hansen, Søren; Jørgensen, Henrik Brøner; Hoang, Linh Cao

2017-01-01

When the load carrying capacity of existing concrete structures is (re-)assessed it is often based on compressive strength of cores drilled out from the structure. Existing studies show that the core compressive strength is anisotropic; i.e. it depends on whether the cores are drilled parallel...

Effects of neck strength training on isometric neck strength in rugby union players.

Science.gov (United States)

Geary, Kevin; Green, Brian S; Delahunt, Eamonn

2014-11-01

To investigate the effectiveness of a neck strengthening program on the isometric neck strength profile of male rugby union players. Controlled laboratory study. Professional rugby union club. Fifteen professional and 10 semiprofessional rugby union players. The 15 professional players undertook a 5-week neck strengthening intervention, which was performed twice per week, whereas the 10 semiprofessional players acted as the control group. Isometric strength of the neck musculature was tested using a hand-held dynamometer, for flexion (F), extension (E), left-side flexion (LSF), and right-side flexion (RSF). Preintervention and postintervention evaluations were undertaken. No significant between-group differences in isometric neck strength were noted preintervention. A significant main effect for time was observed (P isometric neck strength in all planes after the 5-week intervention (F preintervention = 334.45 ± 39.31 N vs F postintervention 396.05 ± 75.55 N; E preintervention = 606.19 ± 97.34 vs E postintervention = 733.88 ± 127.16 N; LSF preintervention = 555.56 ± 88.34 N vs LSF postintervention = 657.14 ± 122.99 N; RSF preintervention = 570.00 ± 106.53 N vs RSF postintervention = 668.00 ± 142.18 N). No significant improvement in neck strength was observed for control group participants. The results of the present study indicate that a 5-week neck strengthening program improves isometric neck strength in rugby union players, which may have implications for injury prevention, screening, and rehabilitation. The strengthening program described in the present study may facilitate rehabilitation specialists in the development of neck injury prevention, screening, and rehabilitation protocols.

A mixed integer programming model for a continuous move transportation problem with service constraints

Directory of Open Access Journals (Sweden)

J. Fabian Lopez

2010-01-01

Full Text Available We consider a Pickup and Delivery Vehicle Routing Problem (PDP commonly encountered in real-world logistics operations. The problem involves a set of practical complications that have received little attention in the vehicle routing literature. In this problem, there are multiple vehicle types available to cover a set of pickup and delivery requests, each of which has pickup time windows and delivery time windows. Transportation orders and vehicle types must satisfy a set of compatibility constraints that specify which orders cannot be covered by which vehicle types. In addition we include some dock service capacity constraints as is required on common real world operations. This problem requires to be attended on large scale instances (orders ≥ 500, (vehicles ≥ 150. As a generalization of the traveling salesman problem, clearly this problem is NP-hard. The exact algorithms are too slow for large scale instances. The PDP-TWDS is both a packing problem (assign order to vehicles, and a routing problem (find the best route for each vehicle. We propose to solve the problem in three stages. The first stage constructs initials solutions at aggregate level relaxing some constraints on the original problem. The other two stages imposes time windows and dock service constraints. Our results are favorable finding good quality solutions in relatively short computational times.

Evaluation of Compressive Strength and Sorption/Solubility of Four Luting Cements

Directory of Open Access Journals (Sweden)

Tavangar MS

2017-06-01

Full Text Available Abstract: Statement of Problem: Compressive strength (CS and sorption/solubility of the luting cements are two associated factors. Searching a correlation between sorption/solubility and compressive strength of various luting cements is required. Objectives: To measure the water sorption/solubility, and compressive strength of three resin-based and one conventional glass ionomer (CGI luting cement after 1 and 24 h of immersion in distilled water and to determine if there is any correlation between those properties found. Materials and Methods: Four luting cements were investigated. For each material, 10 disc shaped specimens were prepared for measuring the sorption/solubility. The specimens were cured according to the manufacturer’s instructions, and the sorption/solubility were measured in accordance with the ISO 4049’s. For testing the compression strength, for each material 16 cylindrical specimens were prepared by insertion of cements into a stainless steel split mould. The specimens were cured, divided into groups of 8, and then stored in distilled water at (37 ± 1°C for 1 and 24 h. The test was performed using the universal testing machine, the maximum load was recorded and CS was calculated. The data were analysed using SPSS software version 18. One-way ANOVA, post-hoc Tukey’s test and Pearson’s correlation coefficient were performed. Results: G-CEM had the highest mean CS (153.60± 25.15 and CGI luting had the lowest CS (21.36±5.37 (p 0.05. The lowest mean sorption/solubility value was for RelyXTM U200 and Panavia F, and the highest for CGI luting (all p < 0.001. Conclusions: The compressive strength of all cements did not necessarily increase after 24 h and varied depending on the materials. There was a strong reverse correlation between sorption and CS values after both 1 and 24 h immersion. It may be practical for clinician to use those cements with the less sorption / solubility and more stable compression strength over

An Extensive Evaluation of Portfolio Approaches for Constraint Satisfaction Problems

Directory of Open Access Journals (Sweden)

Roberto Amadini

2016-06-01

Full Text Available In the context of Constraint Programming, a portfolio approach exploits the complementary strengths of a portfolio of different constraint solvers. The goal is to predict and run the best solver(s of the portfolio for solving a new, unseen problem. In this work we reproduce, simulate, and evaluate the performance of different portfolio approaches on extensive benchmarks of Constraint Satisfaction Problems. Empirical results clearly show the benefits of portfolio solvers in terms of both solved instances and solving time.

Experimental knee pain reduces muscle strength

DEFF Research Database (Denmark)

Henriksen, Marius; Mortensen, Sara Rosager; Aaboe, Jens

2011-01-01

Pain is the principal symptom in knee pathologies and reduced muscle strength is a common observation among knee patients. However, the relationship between knee joint pain and muscle strength remains to be clarified. This study aimed at investigating the changes in knee muscle strength following...... experimental knee pain in healthy volunteers, and if these changes were associated with the pain intensities. In a crossover study, 18 healthy subjects were tested on 2 different days. Using an isokinetic dynamometer, maximal muscle strength in knee extension and flexion was measured at angular velocities 0....... Knee pain reduced the muscle strength by 5 to 15% compared to the control conditions (P knee extension and flexion at all angular velocities. The reduction in muscle strength was positively correlated to the pain intensity. Experimental knee pain significantly reduced knee extension...

Topology optimization problems with design-dependent sets of constraints

DEFF Research Database (Denmark)

Schou, Marie-Louise Højlund

Topology optimization is a design tool which is used in numerous fields. It can be used whenever the design is driven by weight and strength considerations. The basic concept of topology optimization is the interpretation of partial differential equation coefficients as effective material...... properties and designing through changing these coefficients. For example, consider a continuous structure. Then the basic concept is to represent this structure by small pieces of material that are coinciding with the elements of a finite element model of the structure. This thesis treats stress constrained...... structural topology optimization problems. For such problems a stress constraint for an element should only be present in the optimization problem when the structural design variable corresponding to this element has a value greater than zero. We model the stress constrained topology optimization problem...

Ethnic differences in problem perception and perceived need for care for young children with problem behaviour.

Science.gov (United States)

Bevaart, Floor; Mieloo, Cathelijne L; Jansen, Wilma; Raat, Hein; Donker, Marianne C H; Verhulst, Frank C; van Oort, Floor V A

2012-10-01

 Problem perception and perceived need for professional care are important determinants that can contribute to ethnic differences in the use of mental health care. Therefore, we studied ethnic differences in problem perception and perceived need for professional care in the parents and teachers of 5- to 6-year-old children from the general population who were selected for having emotional and behavioural problems. A cross-sectional study with data of 10,951 children from grade two of the elementary schools in the Rotterdam-Rijnmond area, The Netherlands. Parents and teachers completed the strengths and difficulties questionnaire (SDQ) as well as questions on problem perception and perceived need for care. The SDQ was used to identify children with emotional and behavioural problems. We included Dutch, Surinamese, Antillean, Moroccan and Turkish children in our sample with high (>P90) SDQ scores (N = 1,215), who were not currently receiving professional care for their problems. Amongst children with high SDQ scores, problem perception was lower in non-Dutch parents than in Dutch parents (49% vs. 81%, p ethnic differences were found in parental perceived need and in problem perception and perceived need reported by teachers. Higher levels of problem perception and perceived need were reported by teachers than by parents in all ethnic groups (PP: 87% vs. 63% and PN: 48% vs. 23%). Child health professionals should be aware of ethnic variations in problem perception as low problem perception in parents of non-Dutch children may lead to miscommunication and unmet need for professional care for the child. © 2012 The Authors. Journal of Child Psychology and Psychiatry © 2012 Association for Child and Adolescent Mental Health.

Effect of water absorption by the aggregate on properties of high-strength lightweight concrete

Energy Technology Data Exchange (ETDEWEB)

Punkki, J

1996-12-31

Recently, high-strength lightweight concrete has become an interesting building material for the offshore oil industry. This doctoral thesis presents an experimental investigation of the effect of water absorption by three different types of lightweight aggregates. One type did not show any water absorption ability at all and so represented no problem to the concrete production. For the two other high-strength aggregates, which were of more conventional types, the water absorption depended not only on the properties of the aggregates, but also on the concrete mixing procedure and the properties of the fresh cement paste. When water absorbing lightweight aggregate was used in a dry condition, the workability of the concrete was significantly reduced by the water absorption of the aggregate. This effect was not present when prewetted aggregate was used. The water absorption by the lightweight aggregate also affected the early compressive strength of concrete. After one day, dry aggregate gave on the average 10 MPa higher compressive strength than did prewetted aggregate. The strength-density ratio was affected by the moisture condition of the aggregate. Dry lightweight aggregate gave 9 MPa higher compressive strength at a density of 2000 kg/m{sup 3} compared to that of prewetted aggregate. The water absorption by the lightweight also affected the microstructure of the hardened concrete. Dry lightweight aggregate gave a slightly better microstructure than normal weight aggregate. The results indicate that the use of prewetted aggregate adversely affected the transition zone between the aggregate and the cement paste. 69 refs., 58 figs., 42 tabs.

Effect of water absorption by the aggregate on properties of high-strength lightweight concrete

Energy Technology Data Exchange (ETDEWEB)

Punkki, J.

1995-12-31

Recently, high-strength lightweight concrete has become an interesting building material for the offshore oil industry. This doctoral thesis presents an experimental investigation of the effect of water absorption by three different types of lightweight aggregates. One type did not show any water absorption ability at all and so represented no problem to the concrete production. For the two other high-strength aggregates, which were of more conventional types, the water absorption depended not only on the properties of the aggregates, but also on the concrete mixing procedure and the properties of the fresh cement paste. When water absorbing lightweight aggregate was used in a dry condition, the workability of the concrete was significantly reduced by the water absorption of the aggregate. This effect was not present when prewetted aggregate was used. The water absorption by the lightweight aggregate also affected the early compressive strength of concrete. After one day, dry aggregate gave on the average 10 MPa higher compressive strength than did prewetted aggregate. The strength-density ratio was affected by the moisture condition of the aggregate. Dry lightweight aggregate gave 9 MPa higher compressive strength at a density of 2000 kg/m{sup 3} compared to that of prewetted aggregate. The water absorption by the lightweight also affected the microstructure of the hardened concrete. Dry lightweight aggregate gave a slightly better microstructure than normal weight aggregate. The results indicate that the use of prewetted aggregate adversely affected the transition zone between the aggregate and the cement paste. 69 refs., 58 figs., 42 tabs.

Is grip strength a predictor for total muscle strength in healthy children, adolescents, and young adults?

NARCIS (Netherlands)

Wind, Anne E.; Takken, Tim; Helders, Paul J. M.; Engelbert, Raoul H. H.

2010-01-01

The primary purpose of this study was to examine whether grip strength is related to total muscle strength in children, adolescents, and young adults. The second purpose was to provide reference charts for grip strength, which could be used in the clinical and research setting. This cross-sectional

An Optimization Approach for Hazardous Waste Management Problem under Stochastic Programming

International Nuclear Information System (INIS)

Abass, S.A.; Abdallah, A.S.; Gomaa, M.A.

2008-01-01

Hazardous waste is the waste which, due to their nature and quantity, is potentially hazardous to human health and/or the environment. This kind of waste requires special disposal techniques to eliminate or reduce thc hazardous. Hazardous waste management (HWM) problem is concerned in the basic with the disposal method. hi this paper we focus on incineration as an effective to dispose the waste. For this type of disposal, there arc air pollution standards imposed by the government. We will propose an optimization model satisfied the air pollution standards and based on the model of Emek and Kara with using random variable coefficients in the constraint

Utilization of waste glass in ECO-cement: Strength properties and microstructural observations

International Nuclear Information System (INIS)

Sobolev, Konstantin; Tuerker, Pelin; Soboleva, Svetlana; Iscioglu, Gunsel

2007-01-01

Waste glass creates a serious environmental problem, mainly because of the inconsistency of the waste glass streams. The use of waste glass as a finely ground mineral additive (FGMA) in cement is a promising direction for recycling. Based on the method of mechano-chemical activation, a new group of ECO-cements was developed. In ECO-cement, relatively large amounts (up to 70%) of portland cement clinker can be replaced with waste glass. This report examines the effect of waste glass on the microstructure and strength of ECO-cement based materials. Scanning electron microscopy (SEM) investigations were used to observe the changes in the cement hydrates and interface between the cement matrix and waste glass particles. According to the research results, the developed ECO-cement with 50% of waste glass possessed compressive strength properties at a level similar to normal portland cement

Protein Homeostasis Imposes a Barrier on Functional Integration of Horizontally Transferred Genes in Bacteria.

Science.gov (United States)

Bershtein, Shimon; Serohijos, Adrian W R; Bhattacharyya, Sanchari; Manhart, Michael; Choi, Jeong-Mo; Mu, Wanmeng; Zhou, Jingwen; Shakhnovich, Eugene I

2015-10-01

Horizontal gene transfer (HGT) plays a central role in bacterial evolution, yet the molecular and cellular constraints on functional integration of the foreign genes are poorly understood. Here we performed inter-species replacement of the chromosomal folA gene, encoding an essential metabolic enzyme dihydrofolate reductase (DHFR), with orthologs from 35 other mesophilic bacteria. The orthologous inter-species replacements caused a marked drop (in the range 10-90%) in bacterial growth rate despite the fact that most orthologous DHFRs are as stable as E.coli DHFR at 37°C and are more catalytically active than E. coli DHFR. Although phylogenetic distance between E. coli and orthologous DHFRs as well as their individual molecular properties correlate poorly with growth rates, the product of the intracellular DHFR abundance and catalytic activity (kcat/KM), correlates strongly with growth rates, indicating that the drop in DHFR abundance constitutes the major fitness barrier to HGT. Serial propagation of the orthologous strains for ~600 generations dramatically improved growth rates by largely alleviating the fitness barriers. Whole genome sequencing and global proteome quantification revealed that the evolved strains with the largest fitness improvements have accumulated mutations that inactivated the ATP-dependent Lon protease, causing an increase in the intracellular DHFR abundance. In one case DHFR abundance increased further due to mutations accumulated in folA promoter, but only after the lon inactivating mutations were fixed in the population. Thus, by apparently distinguishing between self and non-self proteins, protein homeostasis imposes an immediate and global barrier to the functional integration of foreign genes by decreasing the intracellular abundance of their products. Once this barrier is alleviated, more fine-tuned evolution occurs to adjust the function/expression of the transferred proteins to the constraints imposed by the intracellular

Protein Homeostasis Imposes a Barrier on Functional Integration of Horizontally Transferred Genes in Bacteria.

Directory of Open Access Journals (Sweden)

Shimon Bershtein

2015-10-01

Full Text Available Horizontal gene transfer (HGT plays a central role in bacterial evolution, yet the molecular and cellular constraints on functional integration of the foreign genes are poorly understood. Here we performed inter-species replacement of the chromosomal folA gene, encoding an essential metabolic enzyme dihydrofolate reductase (DHFR, with orthologs from 35 other mesophilic bacteria. The orthologous inter-species replacements caused a marked drop (in the range 10-90% in bacterial growth rate despite the fact that most orthologous DHFRs are as stable as E.coli DHFR at 37°C and are more catalytically active than E. coli DHFR. Although phylogenetic distance between E. coli and orthologous DHFRs as well as their individual molecular properties correlate poorly with growth rates, the product of the intracellular DHFR abundance and catalytic activity (kcat/KM, correlates strongly with growth rates, indicating that the drop in DHFR abundance constitutes the major fitness barrier to HGT. Serial propagation of the orthologous strains for ~600 generations dramatically improved growth rates by largely alleviating the fitness barriers. Whole genome sequencing and global proteome quantification revealed that the evolved strains with the largest fitness improvements have accumulated mutations that inactivated the ATP-dependent Lon protease, causing an increase in the intracellular DHFR abundance. In one case DHFR abundance increased further due to mutations accumulated in folA promoter, but only after the lon inactivating mutations were fixed in the population. Thus, by apparently distinguishing between self and non-self proteins, protein homeostasis imposes an immediate and global barrier to the functional integration of foreign genes by decreasing the intracellular abundance of their products. Once this barrier is alleviated, more fine-tuned evolution occurs to adjust the function/expression of the transferred proteins to the constraints imposed by the

Crushing strength of HTGR fuel particles

International Nuclear Information System (INIS)

Lackey, W.J.; Stinton, D.P.; Davis, L.E.; Beatty, R.L.

1976-01-01

The whole-particle crushing strengths of High-Temperature Gas-Cooled Reactor fertile and fissile coated particles were measured and correlated with fabrication procedures. The crushing strength of Biso-coated fertile particles was increased by the following factors: (1) increasing the outer coating thickness by 10 μm increased strengths by 0.3 lb (1.3 N) for annealed particles and by 0.5 lb (2.2 N) for unannealed particles. (2) An 1800 0 C postcoating anneal increased strengths by 1 lb (4.4 N) for particles with thick outer coatings and by 2 lb (8.9 N) for particles having thin coatings. (3) Increasing the inner coating density by 0.1 g/cm 3 increased strength by 0.6 lb (2.7 N). The crushing strength of Triso-coated fissile particles was proportional to the thickness of the SiC coatings, and strength decreased on annealing by about 0.2 lb (0.9 N) when a porous plate was used to distribute the coating gas and by about 1.5 lb (6.7 N) when a conical gas distributor was used. The strengths of fertile and fissile coated particles as well as uncoated kernels appear adequate to allow fuel fabrication without excessive particle damage

High-temperature strength of TiC-coated SUS316 stainless steel

International Nuclear Information System (INIS)

Kaneko, K.; Furuya, Y.; Kikuchi, M.

1992-01-01

Some ceramics-coated metals are nominated as first-wall material. TiC-coated type 316 stainless steel is expected to be superior to other materials in high-temperature strength and in its endurance properties at heavy irradiation. Delamination between ceramics layer and base-metal is considered to be one of the most important problems when such ceramics-coated metals are used in a temperature field with a gradient such as that of the first wall. In this report, the high-temperature strength of TiC-coated type 316 stainless steel, which should be that of the first wall of the fusion reactor, is investigated experimentally and computationally. A simple and precise thermal-stress testing system is developed. The effects of surface roughness as well as of the thermal stress and the residual stress on the bonding strength are investigated. The experimental and numerical results on the residual-stress distribution are compared with each other to confirm the reliability of the inelastic analysis using the finite-element method (FEM). It is expected that a suitable surface roughness makes the residual stress in the coated film small. The optimum range for the TiC-coating temperature is found using inelastic FEM analysis at the heating conditions used in the experiments. (orig.)

Investigations into the Optimization of Multi-Source Strength Brachytherapy Treatment Procedures

International Nuclear Information System (INIS)

Henderson, D. L.; Yoo, S.; Thomadsen, B.R.

2002-01-01

The goal of this project is to investigate the use of multi-strength and multi-specie radioactive sources in permanent prostate implant brachytherapy. In order to fulfill the requirement for an optimal dose distribution, the prescribed dose should be delivered to the target in a nearly uniform dose distribution while simultaneously sparing sensitive structures. The treatment plan should use a small number of needles and sources while satisfying the treatment requirements. The hypothesis for the use of multi-strength and/or multi-specie sources is that a better treatment plan using fewer sources and needles could be obtained than by treatment plans using single-strength sources could reduce the overall number of sources used for treatment. We employ a recently developed greedy algorithm based on the adjoint concept as the optimization search engine. The algorithm utilizes and ''adjoint ratio'', which provides a means of ranking source positions, as the pseudo-objective function. It ha s been shown that the greedy algorithm can solve the optimization problem efficiently and arrives at a clinically acceptable solution in less than 10 seconds. Our study was inclusive, that is there was no combination of sources that clearly stood out from the others and could therefore be considered the preferred set of sources for treatment planning. Source strengths of 0.2 mCi (low), 0.4 mCi (medium), and 0.6 mCi (high) of 125 I in four different combinations were used for the multi-strength source study. The combination of high- and medium-strength sources achieved a more uniform target dose distribution due to few source implants whereas the combination of low-and medium-strength sources achieved better sparing of sensitive tissues including that of the single-strength 0.4 mCi base case. 125 I at 0.4 mCi and 192 Ir at 0.12 mCi and 0.25 mCi source strengths were used for the multi-specie source study. This study also proved inconclusive , Treatment plans using a combination of two 0

The Importance of Muscular Strength: Training Considerations.

Science.gov (United States)

Suchomel, Timothy J; Nimphius, Sophia; Bellon, Christopher R; Stone, Michael H

2018-04-01

This review covers underlying physiological characteristics and training considerations that may affect muscular strength including improving maximal force expression and time-limited force expression. Strength is underpinned by a combination of morphological and neural factors including muscle cross-sectional area and architecture, musculotendinous stiffness, motor unit recruitment, rate coding, motor unit synchronization, and neuromuscular inhibition. Although single- and multi-targeted block periodization models may produce the greatest strength-power benefits, concepts within each model must be considered within the limitations of the sport, athletes, and schedules. Bilateral training, eccentric training and accentuated eccentric loading, and variable resistance training may produce the greatest comprehensive strength adaptations. Bodyweight exercise, isolation exercises, plyometric exercise, unilateral exercise, and kettlebell training may be limited in their potential to improve maximal strength but are still relevant to strength development by challenging time-limited force expression and differentially challenging motor demands. Training to failure may not be necessary to improve maximum muscular strength and is likely not necessary for maximum gains in strength. Indeed, programming that combines heavy and light loads may improve strength and underpin other strength-power characteristics. Multiple sets appear to produce superior training benefits compared to single sets; however, an athlete's training status and the dose-response relationship must be considered. While 2- to 5-min interset rest intervals may produce the greatest strength-power benefits, rest interval length may vary based an athlete's training age, fiber type, and genetics. Weaker athletes should focus on developing strength before emphasizing power-type training. Stronger athletes may begin to emphasize power-type training while maintaining/improving their strength. Future research should

Phantom dark energy with varying-mass dark matter particles: Acceleration and cosmic coincidence problem

International Nuclear Information System (INIS)

Leon, Genly; Saridakis, Emmanuel N.

2010-01-01

We investigate several varying-mass dark matter particle models in the framework of phantom cosmology. We examine whether there exist late-time cosmological solutions, corresponding to an accelerating universe and possessing dark energy and dark matter densities of the same order. Imposing exponential or power-law potentials and exponential or power-law mass dependence, we conclude that the coincidence problem cannot be solved or even alleviated. Thus, if dark energy is attributed to the phantom paradigm, varying-mass dark matter models cannot fulfill the basic requirement that led to their construction.

The Wicked Problem of Climate Change: A New Approach Based on Social Mess and Fragmentation

Directory of Open Access Journals (Sweden)

Jiazhe Sun

2016-12-01

Full Text Available The 21st century has been the warmest period on record since 1880, making the problem of climate change a central issue in the global political arena. While most approaches to climate change emphasize setting and imposing thresholds for greenhouse gas emissions, this paper argues that the issue of climate change and its solutions should be viewed in a more dynamic and complex way, involving social messes and the fragmentation of industries and organizations. In this context, learning models can offer a starting point to understand the reasons why organizations engage in certain types of corporate environmental strategies with regard to climate change, and can help in the search for solutions to the problem of climate change.

The hard problem of cooperation.

Directory of Open Access Journals (Sweden)

Kimmo Eriksson

Full Text Available Based on individual variation in cooperative inclinations, we define the "hard problem of cooperation" as that of achieving high levels of cooperation in a group of non-cooperative types. Can the hard problem be solved by institutions with monitoring and sanctions? In a laboratory experiment we find that the answer is affirmative if the institution is imposed on the group but negative if development of the institution is left to the group to vote on. In the experiment, participants were divided into groups of either cooperative types or non-cooperative types depending on their behavior in a public goods game. In these homogeneous groups they repeatedly played a public goods game regulated by an institution that incorporated several of the key properties identified by Ostrom: operational rules, monitoring, rewards, punishments, and (in one condition change of rules. When change of rules was not possible and punishments were set to be high, groups of both types generally abided by operational rules demanding high contributions to the common good, and thereby achieved high levels of payoffs. Under less severe rules, both types of groups did worse but non-cooperative types did worst. Thus, non-cooperative groups profited the most from being governed by an institution demanding high contributions and employing high punishments. Nevertheless, in a condition where change of rules through voting was made possible, development of the institution in this direction was more often voted down in groups of non-cooperative types. We discuss the relevance of the hard problem and fit our results into a bigger picture of institutional and individual determinants of cooperative behavior.

The hard problem of cooperation.

Science.gov (United States)

Eriksson, Kimmo; Strimling, Pontus

2012-01-01

Based on individual variation in cooperative inclinations, we define the "hard problem of cooperation" as that of achieving high levels of cooperation in a group of non-cooperative types. Can the hard problem be solved by institutions with monitoring and sanctions? In a laboratory experiment we find that the answer is affirmative if the institution is imposed on the group but negative if development of the institution is left to the group to vote on. In the experiment, participants were divided into groups of either cooperative types or non-cooperative types depending on their behavior in a public goods game. In these homogeneous groups they repeatedly played a public goods game regulated by an institution that incorporated several of the key properties identified by Ostrom: operational rules, monitoring, rewards, punishments, and (in one condition) change of rules. When change of rules was not possible and punishments were set to be high, groups of both types generally abided by operational rules demanding high contributions to the common good, and thereby achieved high levels of payoffs. Under less severe rules, both types of groups did worse but non-cooperative types did worst. Thus, non-cooperative groups profited the most from being governed by an institution demanding high contributions and employing high punishments. Nevertheless, in a condition where change of rules through voting was made possible, development of the institution in this direction was more often voted down in groups of non-cooperative types. We discuss the relevance of the hard problem and fit our results into a bigger picture of institutional and individual determinants of cooperative behavior.

ACID SPLASH: QISAS PUNISHMENT TO BE IMPOSED AGAINST THE OFFENDER

Directory of Open Access Journals (Sweden)

Mohammed Farid Huzaimi

2013-02-01

Full Text Available In Islamic countries, there are cases where a court has given punishment to an acid splasher to be punished by acid as well. In 2004, an Iranian woman was blinded with acid by her suitor for turning down his marriage proposal. Four years later, the Iranian court sentenced the offender to be blinded in both eyes for taking away the woman’s sight under the retribution principle permitted under Iran’s Islamic law. This case’s decision has regularly been objected as the punishment seems inhuman. This paper will discuss in detail the nature of the offence and the punishment imposed in Islamic perspective. Terdapat beberapa kasus di negara-negara Islam di mana pengadilan memberikan hukuman pembalasan terhadap terdakwa yang menyiram cairan asam ke tubuh orang lain. Pada tahun 2004, seorang perempuan Iran dibutakan dengan asam oleh peminangnya setelah si perempuan menolak lamaran pria tersebut. Empat tahun setelahnya, pengadilan di Iran memutuskan untuk menghukum pria tersebut dengan hukuman yang sama, yaitu dibutakan dengan asam. Hukuman ini dijatuhkan dengan dasar asas retribusi menurut hukum Islam di Iran. Putusan hakim dalam kasus ini telah menuai kritik karena hukuman tersebut dianggap tidak berperikemanusiaan. Artikel ini akan membahas lebih dalam tentang perbuatan menyiram cairan asam dan hukuman pembalasan menurut perspektif Islam.

The corporation and the community: Credibility, legitimacy, and imposed risk

International Nuclear Information System (INIS)

Wade, C.; Rosenthal, I.

1991-10-01

In this age of rapid changes, large segments of society no longer trust any institution or authority in regard to pronouncements on what is safe. Because of this distrust, the public has demanded and obtained increased rights for individuals to intervene directly in decisions affecting them. Rosenthal warns that an organization that just fulfills its legal requirements for safety is no longer doing enough. Industry leaders must work toward re-establishing credibility by identifying persons who are potentially at risk as a result of industry activities, involving them in the communication process, and justifying the firm's social benefits. Seeking social legitimacy, chemical manufacturers have formed self-assessment groups and community councils, which have reaped unexpected benefits but have forced them to deal with issues they would have preferred to avoid. To industry leaders who contend that these types of activities are not worth the effort, Rosenthal presents a timely warning. Government and business must reduce public concerns significantly and make stakeholders more willing to tolerate imposed risk because of perceived benefits. It the public's concern is not reduced, we will all be required to make greater and greater investments in an inefficient and largely fruitless pursuit of absolute safety. 16 refs

The corporation and the community: Credibility, legitimacy, and imposed risk

Energy Technology Data Exchange (ETDEWEB)

Wade, C. (ed.) (Los Alamos National Lab., NM (United States)); Rosenthal, I. (Pennsylvania Univ., Philadelphia, PA (United States). Center for Risk and Decision Processes)

1991-10-01

In this age of rapid changes, large segments of society no longer trust any institution or authority in regard to pronouncements on what is safe. Because of this distrust, the public has demanded and obtained increased rights for individuals to intervene directly in decisions affecting them. Rosenthal warns that an organization that just fulfills its legal requirements for safety is no longer doing enough. Industry leaders must work toward re-establishing credibility by identifying persons who are potentially at risk as a result of industry activities, involving them in the communication process, and justifying the firm's social benefits. Seeking social legitimacy, chemical manufacturers have formed self-assessment groups and community councils, which have reaped unexpected benefits but have forced them to deal with issues they would have preferred to avoid. To industry leaders who contend that these types of activities are not worth the effort, Rosenthal presents a timely warning. Government and business must reduce public concerns significantly and make stakeholders more willing to tolerate imposed risk because of perceived benefits. It the public's concern is not reduced, we will all be required to make greater and greater investments in an inefficient and largely fruitless pursuit of absolute safety. 16 refs.

Hypercapnic normalization of BOLD fMRI: comparison across field strengths and pulse sequences

DEFF Research Database (Denmark)

Cohen, Eric R.; Rostrup, Egill; Sidaros, Karam

2004-01-01

to be more accurately localized and quantified based on changes in venous blood oxygenation alone. The normalized BOLD signal induced by the motor task was consistent across different magnetic fields and pulse sequences, and corresponded well with cerebral blood flow measurements. Our data suggest...... size, as well as experimental, such as pulse sequence and static magnetic field strength (B(0)). Thus, it is difficult to compare task-induced fMRI signals across subjects, field strengths, and pulse sequences. This problem can be overcome by normalizing the neural activity-induced BOLD fMRI response...... for global stimulation, subjects breathed a 5% CO(2) gas mixture. Under all conditions, voxels containing primarily large veins and those containing primarily active tissue (i.e., capillaries and small veins) showed distinguishable behavior after hypercapnic normalization. This allowed functional activity...

Spent fuel transportation problems

International Nuclear Information System (INIS)

Kondrat'ev, A.N.; Kosarev, Yu.A.; Yulikov, E.A.

1977-01-01

In this paper, problems of transportation of nuclear spent fuel to reprocessing plants are discussed. The solutions proposed are directed toward the achievement of the transportation as economic and safe as possible. The increase of the nuclear power plants number in the USSR and the great distances between these plants and the reprocessing plants involve an intensification of the spent fuel transportation. Higher burnup and holdup time reduction cause the necessity of more bulky casks. In this connection, the economic problems become still more important. One of the ways of the problem solution is the development of rational and cheap cask designs. Also, the enforcement in the world of the environmental and personnel health protection requires to increase the transportation reliability and safety. The paper summarizes safe transportation rules with clarifying the following questions: the increase of the transport unit quantity of the spent fuel; rational shipment organization that minimizes vehicle turnover cycle duration; development of the reliable calculation methods to determine strength, thermal conditions and nuclear safety of transport packaging as applied to the vehicles of high capacity; maximum unification of vehicles, calculation methods and documents; and cask testing on models and in pilot scale on specific test rigs to assure that they meet the international safe fuel shipment rules. Besides, some considerations on the choice and use of structural materials for casks are given, and problems of manufacturing such casks from uranium and lead are considered, as well as problems of the development of fireproof shells, control instrumentation, vehicles decontamination, etc. All the problems are considered from the point of view of normal and accidental shipment conditions. Conclusions are presented [ru

The Character Strengths of Class Clowns

Directory of Open Access Journals (Sweden)

Willibald F. Ruch

2014-09-01

Full Text Available Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of identified as a class clown, comic talent, disruptive rule-breaker, and subversive joker. Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park & Peterson, 2006 showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, generally class clown behaviors were shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors identified as the class clown and comic talent were correlated with leadership strengths and the two negative factors (disruptive rule-breaker, subversive joker were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

The character strengths of class clowns.

Science.gov (United States)

Ruch, Willibald; Platt, Tracey; Hofmann, Jennifer

2014-01-01

Class clowns traditionally were studied as a type concept and identified via sociometric procedures. In the present study a variable-centered approach was favored and class clown behaviors were studied in the context of character strengths, orientations to happiness and satisfaction with life. A sample of 672 Swiss children and adolescents filled in an 18 item self-report instrument depicting class clown behaviors. A hierarchical model of class clown behaviors was developed distinguishing a general factor and the four positively correlated dimensions of "identified as a class clown," "comic talent," "disruptive rule-breaker," and "subversive joker." Analysis of the general factor showed that class clowns were primarily male, and tended to be seen as class clowns by the teacher. Analyses of the 24 character strengths of the VIA-Youth (Park and Peterson, 2006) showed that class clowns were high in humor and leadership, and low in strengths like prudence, self-regulation, modesty, honesty, fairness, perseverance, and love of learning. An inspection of signature strengths revealed that 75% of class clowns had humor as a signature strength. Furthermore, class clown behaviors were generally shown by students indulging in a life of pleasure, but low life of engagement. The four dimensions yielded different character strengths profiles. While all dimensions of class clowns behaviors were low in temperance strengths, the factors "identified as the class clown" and "comic talent" were correlated with leadership strengths and the two negative factors ("disruptive rule-breaker," "subversive joker") were low in other directed strengths. The disruptive rule breaking class clown was additionally low in intellectual strengths. While humor predicted life satisfaction, class clowning tended to go along with diminished satisfaction with life. It is concluded that different types of class clowns need to be kept apart and need different attention by teachers.

Design and Characterization of High-strength Bond Coats for Improved Thermal Barrier Coating Durability

Science.gov (United States)

Jorgensen, David John

High pressure turbine blades in gas turbine engines rely on thermal barrier coating (TBC) systems for protection from the harsh combustion environment. These coating systems consist of a ceramic topcoat for thermal protection, a thermally grown oxide (TGO) for oxidation passivation, and an intermetallic bond coat to provide compatibility between the substrate and ceramic over-layers while supplying aluminum to sustain Al2O 3 scale growth. As turbine engines are pushed to higher operating temperatures in pursuit of better thermal efficiency, the strength of industry-standard bond coats limits the lifetime of these coating systems. Bond coat creep deformation during thermal cycling leads to a failure mechanism termed rumpling. The interlayer thermal expansion differences, combined with TGO-imposed growth stresses, lead to the development of periodic undulations in the bond coat. The ceramic topcoat has low out-of-plane compliance and thus detaches and spalls from the substrate, resulting in a loss of thermal protection and subsequent degradation of mechanical properties. New creep resistant Ni3Al bond coats were designed with improved high-temperature strength to inhibit this type of premature failure at elevated temperatures. These coatings resist rumpling deformation while maintaining compatibility with the other layers in the system. Characterization methods are developed to quantify rumpling and assess the TGO-bond coat interface toughness of experimental systems. Cyclic oxidation experiments at 1163 °C show that the Ni3Al bond coats do not experience rumpling but have faster oxide growth rates and are quicker to spall TGO than the (Pt,Ni)Al benchmark. However, the Ni 3Al coatings outperformed the benchmark by over threefold in TBC system life due to a higher resistance to rumpling (mechanical degradation) while maintaining adequate oxidation passivation. The Ni3Al coatings eventually grow spinel NiAl2O4 on top of the protective Al2O3 layer, which leads to the

Interseason variability in isokinetic strength and poor correlation with Nordic hamstring eccentric strength in football players.

Science.gov (United States)

van Dyk, N; Witvrouw, E; Bahr, R

2018-04-25

In elite sport, the use of strength testing to establish muscle function and performance is common. Traditionally, isokinetic strength tests have been used, measuring torque during concentric and eccentric muscle action. A device that measures eccentric hamstring muscle strength while performing the Nordic hamstring exercise is now also frequently used. The study aimed to investigate the variability of isokinetic muscle strength over time, for example, between seasons, and the relationship between isokinetic testing and the new Nordic hamstring exercise device. All teams (n = 18) eligible to compete in the premier football league in Qatar underwent a comprehensive strength assessment during their periodic health evaluation at Aspetar Orthopaedic and Sports Medicine Hospital in Qatar. Isokinetic strength was investigated for measurement error, and correlated to Nordic hamstring exercise strength. Of the 529 players included, 288 players had repeated tests with 1/2 seasons between test occasions. Variability (measurement error) between test occasions was substantial, as demonstrated by the measurement error (approximately 25 Nm, 15%), whether separated by 1 or 2 seasons. Considering hamstring injuries, the same pattern was observed among injured (n = 60) and uninjured (n = 228) players. A poor correlation (r = .35) was observed between peak isokinetic hamstring eccentric torque and Nordic hamstring exercise peak force. The strength imbalance between limbs calculated for both test modes was not correlated (r = .037). There is substantial intraindividual variability in all isokinetic test measures, whether separated by 1 or 2 seasons, irrespective of injury. Also, eccentric hamstring strength and limb-to-limb imbalance were poorly correlated between the isokinetic and Nordic hamstring exercise tests. © 2018 John Wiley & Sons A/S. Published by John Wiley & Sons Ltd.

Comparison of Thermal Stability of Dry High-strength Concrete and Wet High-strength Concrete

Science.gov (United States)

Musorina, Tatiana; Katcay, Aleksandr; Selezneva, Anna; Kamskov, Victor

2018-03-01

High-strength concrete is a modern material, which occupies it`s own niche on the construction material market. It is applicable in a large-scale high-rise construction, particularly an underground construction is a frequently used solution for a space saving. Usually underground structure is related to a wet usage environment. Though not all properties of the high-strength concrete are investigated to the full extent. Under adverse climatic conditions of the Russian Federation one of the most important properties for constructional materials is a thermal capacity. Therefore, the main purpose of the paper is to compare a thermal capacity of the high-strength concrete in humid conditions and a thermal capacity of the high-strength concrete in dry operational condition. During the study dependency between thermal capacity and design wall thickness and ambient humidity has to be proven with two experiments. As a result the theoretical relation between thermal capacity characteristic - thermal inertia and wall thickness and ambient humidity was confirmed by the experimental data. The thermal capacity of a building is in direct ratio to the construction thickness. It follows from the experiments and calculations that wet high-strength concrete has less thermal stability.

Links between Preschool Children's Prosocial Skills and Aggressive Conduct Problems: The Contribution of ADHD Symptoms

Science.gov (United States)

Hay, Dale F.; Hudson, Kathryn; Liang, Wentao

2010-01-01

The aim was to examine the relationship between prosocial behavior and conduct problems, especially aggression, in early childhood. In Phase 1 of the study, teachers reported on 93 3-5-year-old children's prosocial behavior and psychological problems, using a screening instrument, the Strengths and Difficulties Questionnaire (SDQ). In Phase 2, 65…

Trajectories of mental health problems in children of parents with mental health problems: results of the BELLA study.

Science.gov (United States)

Plass-Christl, Angela; Otto, Christiane; Klasen, Fionna; Wiegand-Grefe, Silke; Barkmann, Claus; Hölling, Heike; Schulte-Markwort, Michael; Ravens-Sieberer, Ulrike

2017-11-24

Children of parents with mental health problems (CPM) have an increased risk for behavioral and psychological problems. This study investigated the age- and gender-specific course as well as predictors of mental health problems in CPM using the longitudinal data (baseline 1- and 2-year follow-ups) of a German general population sample from the BELLA study. Children and adolescents aged 11-17 years (at baseline) who had a parent with mental health problems (n = 325) were analyzed. The mental health problems of the children were assessed by the self-reported version of the strengths and difficulties questionnaire (SDQ). We used individual growth modeling to investigate the age- and gender-specific course, and the effects of risk as well as personal, familial and social protective factors on self-reported mental health problems in CPM. Additionally, data were examined differentiating internalizing and externalizing mental health problems in CPM. Results indicated that female compared to male CPM showed increasing mental health problems with increasing age. Mental health problems in CPM were associated with lower self-efficacy, worse family climate and less social competence over time. Internalizing problems were associated with lower self-efficacy, less social competence and more severe parental mental health problems. Externalizing problems were associated with lower self-efficacy, worse family climate and lower social competence. The main limitations of the study are the short time period (2 years) covered and the report of mental health problems by only one parent. Our findings should be considered in the development of treatment and prevention programs for mental health problems in CPM.

The effects of adding molybdenum and niobium on the creep strength of 18Cr-10Ni-20Co austenitic steel

International Nuclear Information System (INIS)

Tomono, Yutaka

1987-01-01

The decrease in the creep strength of structural materials during service at elevated temperatures is a very important problem that affects the security of plants and machinery. The improvement in the creep strength of 18Cr-10Ni-20Co austenitic steel achieved through the addition of molybdenum and niobium was studied in tests carried out at 973K and 1,073K. The creep strengthening mechanism was examined using transmission electron micrographs, X-ray diffraction, etc. The results obtained are summarized as follows: (1) The creep strength of low C-18Cr-10Ni-20Co austenitic steel with molybdenum was greatly improved by the addition of niobium up to 1% by weight. In the case of long-term creep, no trend toward decreasing creep strength was observed. (2) The creep strength of austenitic steel possessing a matrix strengthened with molybdenum can be improved through the addition of niobium combined with precipitation hardening with fine carbides precipitated in the grains. (author)

Strategy for fitting source strength and reconstruction procedure in radioactive particle tracking

International Nuclear Information System (INIS)

Mosorov, Volodymyr

2015-01-01

The Radioactive Particle Tracking (RPT) technique is widely applied to study the dynamic properties of flows inside a reactor. Usually, a single radioactive particle that is neutrally buoyant with respect to the phase is used as a tracker. The particle moves inside a 3D volume of interest, and its positions are determined by an array of scintillation detectors, which count the incoming photons. The particle position coordinates are calculated by using a reconstruction procedure that solves a minimization problem between the measured counts and calibration data. Although previous studies have described the influence of specified factors on the RPT resolution and sensitivities, the question of how to choose an appropriate source strength and reconstruction procedure for the given RPT setup remains an unsolved problem. This work describes and applies the original strategy for fitting both the source strength and the sampling time interval to a specified RPT setup to guarantee a required accuracy of measurements. Additionally, the measurement accuracy of an RPT setup can be significantly increased by changing the reconstruction procedure. The results of the simulations, based on the Monte Carlo approach, have demonstrated that the proposed strategy allows for the successful implementation of the As Low As Reasonably Achievable (ALARA) principle when designing the RPT setup. The limitations and drawbacks of the proposed procedure are also presented. - Highlights: • We develop an original strategy for fitting source strength and measurement time interval in radioactive particle tracking (RPT) technique. • The proposed strategy allows successfully to implement the ALAPA (As Low As Reasonably Achievable) principle in designing of a RPT setup. • Measurement accuracy of a RPT setup can be significantly increased by improvement of the reconstruction procedure. • The algorithm can be applied to monitor the motion of the radioactive tracer in a reactor

An Efficient Genetic Algorithm to Solve the Intermodal Terminal Location problem

Directory of Open Access Journals (Sweden)

Mustapha Oudani

2014-11-01

Full Text Available The exponential growth of the flow of goods and passengers, fragility of certain products and the need for the optimization of transport costs impose on carriers to use more and more multimodal transport. In addition, the need for intermodal transport policy has been strongly driven by environmental concerns and to benefit from the combination of different modes of transport to cope with the increased economic competition. This research is mainly concerned with the Intermodal Terminal Location Problem introduced recently in scientific literature which consists to determine a set of potential sites to open and how to route requests to a set of customers through the network while minimizing the total cost of transportation. We begin by presenting a description of the problem. Then, we present a mathematical formulation of the problem and discuss the sense of its constraints. The objective function to minimize is the sum of road costs and railroad combined transportation costs. As the Intermodal Terminal Location Problemproblem is NP-hard, we propose an efficient real coded genetic algorithm for solving the problem. Our solutions are compared to CPLEX and also to the heuristics reported in the literature. Numerical results show that our approach outperforms the other approaches.

A Multiple Period Problem in Distributed Energy Management Systems Considering CO2 Emissions

Science.gov (United States)

Muroda, Yuki; Miyamoto, Toshiyuki; Mori, Kazuyuki; Kitamura, Shoichi; Yamamoto, Takaya

Consider a special district (group) which is composed of multiple companies (agents), and where each agent responds to an energy demand and has a CO2 emission allowance imposed. A distributed energy management system (DEMS) optimizes energy consumption of a group through energy trading in the group. In this paper, we extended the energy distribution decision and optimal planning problem in DEMSs from a single period problem to a multiple periods one. The extension enabled us to consider more realistic constraints such as demand patterns, the start-up cost, and minimum running/outage times of equipment. At first, we extended the market-oriented programming (MOP) method for deciding energy distribution to the multiple periods problem. The bidding strategy of each agent is formulated by a 0-1 mixed non-linear programming problem. Secondly, we proposed decomposing the problem into a set of single period problems in order to solve it faster. In order to decompose the problem, we proposed a CO2 emission allowance distribution method, called an EP method. We confirmed that the proposed method was able to produce solutions whose group costs were close to lower-bound group costs by computational experiments. In addition, we verified that reduction in computational time was achieved without losing the quality of solutions by using the EP method.

Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parameters.

Science.gov (United States)

Chowdhury, S; Maniar, A; Suganya, O M

2015-11-01

In this study, Wood Ash (WA) prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and flexural strength) of concrete with blended WA cement are evaluated and studied. Two different water-to-binder ratio (0.4 and 0.45) and five different replacement percentages of WA (5%, 10%, 15%, 18% and 20%) including control specimens for both water-to-cement ratio is considered. Results of compressive strength, split tensile strength and flexural strength showed that the strength properties of concrete mixture decreased marginally with increase in wood ash contents, but strength increased with later age. The XRD test results and chemical analysis of WA showed that it contains amorphous silica and thus can be used as cement replacing material. Through the analysis of results obtained in this study, it was concluded that WA could be blended with cement without adversely affecting the strength properties of concrete. Also using a new statistical theory of the Support Vector Machine (SVM), strength parameters were predicted by developing a suitable model and as a result, the application of soft computing in structural engineering has been successfully presented in this research paper.

Comparison and Analysis of Steel Frame Based on High Strength Column and Normal Strength Column

Science.gov (United States)

Liu, Taiyu; An, Yuwei

2018-01-01

The anti-seismic performance of high strength steel has restricted its industrialization in civil buildings. In order to study the influence of high strength steel column on frame structure, three models are designed through MIDAS/GEN finite element software. By comparing the seismic performance and economic performance of the three models, the three different structures are comprehensively evaluated to provide some references for the development of high strength steel in steel structure.

Influence of Internal Sulfate Attack on Some Properties of High Strength Concrete

Directory of Open Access Journals (Sweden)

Nada Mahdi Fawzi

2015-08-01

Full Text Available One of the most important problems that faces the concrete industry in Iraq is the deterioration due to internal sulfate attack , since it reduces the compressive strength and increases the expansion of concrete. Consequently, the concrete structure may be damage .The effects of total and total effective sulfate contents on high strength concrete (HSC have been studied in the present study. The research studied the effect of sulfate content in cement , sand and gravel , as well as comparing the total sulfate content with the total effective SO3 content. Materials used were divided into two groups of SO3 in cement ,three groups of SO3 in sand ,and two groups of SO3 in gravel. The results show that considering the total effective sulfate content is better than the total content of sulfates since the effect of sulfate in each constituent of concrete, depends on it's granular size .The smaller the particle size of the material the more effective is the sulfate in it. Therefore, it is recommended to follow the Iraqi specification for total effective sulfate content, because it gives more flexibility to the use of sand and gravel with higher sulfate content. The results of compressive strength at 90-days show that the effect of total effective SO3 content of ( 2.647% , 2.992% , 3.424% that correspond to total sulfate of ( 3.778%, 3.294%, 4.528% decrease the compressive strength by (7.53%, 11.44%, 14.59% respectively.

Balance, gait, functionality and strength: comparison between elderly fallers and non-fallers

Directory of Open Access Journals (Sweden)

Elaine C. Cebolla

2015-04-01

Full Text Available BACKGROUND: Accidental falls are a major health problem related to aging and affect one in every three elderly individuals over the age of sixty. OBJECTIVE: To evaluate and compare the muscle strength, gait kinematics parameters, and performance in functional tests between elderly subjects with and without a prior history of falls. In addition, the association between the history of falls and the variables that demonstrated differences between groups were tested. METHOD: 62 elderly subjects participated in the study and were allocated to the group with falls history (FG; n=20; 68.0±6.9 years old or the group without falls history (CG; n=42; 65.5±4.1 years old. Maximal strength, gait kinematics parameters, and functional tests were tested. RESULTS: The FG showed lower muscle strength in the knee flexors (51.45±8.6 vs. 62.09±19 Kg, lower average toe clearance during the swing phase (0.04±0.006 vs. 0.043 ± 0.005 m, and lower performance in the "8-foot up-and-go" test (5.3±0.7 vs. 5.8±0.7 s (p<0.05. There were no associations between any variables and falls, but the increased time in the "8-foot up-and-go" test may double the likelihood of a fall occurring. CONCLUSION: Fallers have reduced lower limb strength, gait alterations, the worst performance in the dynamic balance test, and an increased risk of falls.

Causes of Payment Problems in the New Zealand Construction Industry

Directory of Open Access Journals (Sweden)

Thanuja Ramachandra

2015-03-01

Full Text Available Payment delays and losses persist in the construction industry and continue to be a key concern to industry practitioners. Therefore an exploration of the key causes of payment delays and losses is undertaken in this study with the ultimate objective of seeking mitigating solutions. The study adopted a survey approach using an online questionnaire, administered to practitioners from the New Zealand construction industry, comprising consultants, head contractors and subcontractors. The data obtained was analysed using inferential statistical techniques, including comparing means and factor analysis. Factor analysis enabled clustering of the inter-related causes of payment delays and losses in order to find reduced number of causes. Accordingly, the study found that payment problems mainly relate to contractual issues, financial strength of industry players, disputes, short-comings of payment processes and ‘domino effects’. Among them, the financial strength of critical industry players was considered central to payment problems. The study concludes that any solution to these problems must address these primary causes, as a rational starting point. Thus procuring a feasible form of financial security at the outset of a project, and the pre-qualification of the financial status of critical project participants, were found to be significant in the mitigation of construction payment risks. Paper Type: Research article

Detection test of wireless network signal strength and GPS positioning signal in underground pipeline

Science.gov (United States)

Li, Li; Zhang, Yunwei; Chen, Ling

2018-03-01

In order to solve the problem of selecting positioning technology for inspection robot in underground pipeline environment, the wireless network signal strength and GPS positioning signal testing are carried out in the actual underground pipeline environment. Firstly, the strength variation of the 3G wireless network signal and Wi-Fi wireless signal provided by China Telecom and China Unicom ground base stations are tested, and the attenuation law of these wireless signals along the pipeline is analyzed quantitatively and described. Then, the receiving data of the GPS satellite signal in the pipeline are tested, and the attenuation of GPS satellite signal under underground pipeline is analyzed. The testing results may be reference for other related research which need to consider positioning in pipeline.

Statistical strength properties, loading and reliability of structures made of reaction bonded silicon nitride

International Nuclear Information System (INIS)

Maier, H.R.; Nink, H.; Krauth, A.

1977-01-01

A prediction of the reliability of structural components requires the definition of transfer data from the combination of materials data, design criteria and application conditions. The determination and transfer of strength data are one unit and therefore similar approximations are necessary. The influence of loading conditions, proof testing and analysing methods is explained with bending tests of rectangular specimens and burst tests of big tubes at room temperature. The drop in strength from 180 N/mm 2 to 50 N/mm 2 via a size factor of 10 5 is predicted and experimentally verified with the most simple statistical extension. The results have been applied to special problems of stress concentrations and give conclusions for test techniques and design fundamentals. (orig.) [de

Relationship between Length and Surface-Enhanced Raman Spectroscopy Signal Strength in Metal Nanoparticle Chains: Ideal Models versus Nanofabrication

Directory of Open Access Journals (Sweden)

Kristen D. Alexander

2012-01-01

Full Text Available We have employed capillary force deposition on ion beam patterned substrates to fabricate chains of 60 nm gold nanospheres ranging in length from 1 to 9 nanoparticles. Measurements of the surface-averaged SERS enhancement factor strength for these chains were then compared to the numerical predictions. The SERS enhancement conformed to theoretical predictions in the case of only a few chains, with the vast majority of chains tested not matching such behavior. Although all of the nanoparticle chains appear identical under electron microscope observation, the extreme sensitivity of the SERS enhancement to nanoscale morphology renders current nanofabrication methods insufficient for consistent production of coupled nanoparticle chains. Notwithstanding this fact, the aggregate data also confirmed that nanoparticle dimers offer a large improvement over the monomer enhancement while conclusively showing that, within the limitations imposed by current state-of-the-art nanofabrication techniques, chains comprising more than two nanoparticles provide only a marginal signal boost over the already considerable dimer enhancement.

High Load Ratio Fatigue Strength and Mean Stress Evolution of Quenched and Tempered 42CrMo4 Steel

Science.gov (United States)

Bertini, Leonardo; Le Bone, Luca; Santus, Ciro; Chiesi, Francesco; Tognarelli, Leonardo

2017-08-01

The fatigue strength at a high number of cycles with initial elastic-plastic behavior was experimentally investigated on quenched and tempered 42CrMo4 steel. Fatigue tests on unnotched specimens were performed both under load and strain controls, by imposing various levels of amplitude and with several high load ratios. Different ratcheting and relaxation trends, with significant effects on fatigue, are observed and discussed, and then reported in the Haigh diagram, highlighting a clear correlation with the Smith-Watson-Topper model. High load ratio tests were also conducted on notched specimens with C (blunt) and V (sharp) geometries. A Chaboche model with three parameter couples was proposed by fitting plain specimen cyclic and relaxation tests, and then finite element analyses were performed to simulate the notched specimen test results. A significant stress relaxation at the notch root became clearly evident by reporting the numerical results in the Haigh diagram, thus explaining the low mean stress sensitivity of the notched specimens.

Strength of mortar containing rubber tire particle

Science.gov (United States)

Jusoh, M. A.; Abdullah, S. R.; Adnan, S. H.

2018-04-01

The main focus in this investigation is to determine the strength consist compressive and tensile strength of mortar containing rubber tire particle. In fact, from the previous study, the strength of mortar containing waste rubber tire in mortar has a slightly decreases compare to normal mortar. In this study, rubber tire particle was replacing on volume of fine aggregate with 6%. 9% and 12%. The sample were indicated M0 (0%), M6 (6%), M9 (9%) and M12 (12%). In this study, two different size of sample used with cube 100mm x 100mm x 100mm for compressive strength and 40mm x 40mm x 160mm for flexural strength. Morphology test was conducted by using Scanning electron microscopic (SEM) were done after testing compressive strength test. The concrete sample were cured for day 3, 7 and 28 before testing. Results compressive strength and flexural strength of rubber mortar shown improved compare to normal mortar.

Nuclear emergency plans in France. Strengths and weaknesses. Report 2016

International Nuclear Information System (INIS)

Boilley, David; Josset, Mylene

2016-01-01

This report first presents nuclear emergency plans in France (specific intervention plans, action at the municipal level, creation of a national plan, planning of the post-accidental phase, integration of the international and cross-border dimension. Then, it analyses strengths and weaknesses of these plans. It outlines the necessity to take the most severe accident scenarios into account (issue of selection of reference accidents, necessity of reviewing emergency planning areas, and assessment of the number of inhabitants about French nuclear installations). It proposes a review of measures of protection of populations (information, sheltering, iodine-based prophylaxis, evacuation, food control and restrictions, protection of human resources, cross-border problems). It discusses how to put an end to the emergency situation, and the assessment and collaboration on emergency plans. The next part proposes an analysis of noticed strengths and weaknesses in some PPIs (specific intervention plans) in terms of text accessibility, of description of the site and of its environment, of intervention area, of operational measures, and of preparation to the post-accidental phase

Effective field theory analysis on μ problem in low-scale gauge mediation

International Nuclear Information System (INIS)

Zheng Sibo

2012-01-01

Supersymmetric models based on the scenario of gauge mediation often suffer from the well-known μ problem. In this paper, we reconsider this problem in low-scale gauge mediation in terms of effective field theory analysis. In this paradigm, all high energy input soft mass can be expressed via loop expansions. If the corrections coming from messenger thresholds are small, as we assume in this letter, then all RG evaluations can be taken as linearly approximation for low-scale supersymmetric breaking. Due to these observations, the parameter space can be systematically classified and studied after constraints coming from electro-weak symmetry breaking are imposed. We find that some old proposals in the literature are reproduced, and two new classes are uncovered. We refer to a microscopic model, where the specific relations among coefficients in one of the new classes are well motivated. Also, we discuss some primary phenomenologies.

High strength alloys

Science.gov (United States)

Maziasz, Phillip James [Oak Ridge, TN; Shingledecker, John Paul [Knoxville, TN; Santella, Michael Leonard [Knoxville, TN; Schneibel, Joachim Hugo [Knoxville, TN; Sikka, Vinod Kumar [Oak Ridge, TN; Vinegar, Harold J [Bellaire, TX; John, Randy Carl [Houston, TX; Kim, Dong Sub [Sugar Land, TX

2010-08-31

High strength metal alloys are described herein. At least one composition of a metal alloy includes chromium, nickel, copper, manganese, silicon, niobium, tungsten and iron. System, methods, and heaters that include the high strength metal alloys are described herein. At least one heater system may include a canister at least partially made from material containing at least one of the metal alloys. At least one system for heating a subterranean formation may include a tubular that is at least partially made from a material containing at least one of the metal alloys.

Evaluation of cognitive loads imposed by traditional paper-based and innovative computer-based instructional strategies.

Science.gov (United States)

Khalil, Mohammed K; Mansour, Mahmoud M; Wilhite, Dewey R

2010-01-01

Strategies of presenting instructional information affect the type of cognitive load imposed on the learner's working memory. Effective instruction reduces extraneous (ineffective) cognitive load and promotes germane (effective) cognitive load. Eighty first-year students from two veterinary schools completed a two-section questionnaire that evaluated their perspectives on the educational value of a computer-based instructional program. They compared the difference between cognitive loads imposed by paper-based and computer-based instructional strategies used to teach the anatomy of the canine skeleton. Section I included 17 closed-ended items, rated on a five-point Likert scale, that assessed the use of graphics, content, and the learning process. Section II included a nine-point mental effort rating scale to measure the level of difficulty of instruction; students were asked to indicate the amount of mental effort invested in the learning task using both paper-based and computer-based presentation formats. The closed-ended data were expressed as means and standard deviations. A paired t test with an alpha level of 0.05 was used to determine the overall mean difference between the two presentation formats. Students positively evaluated their experience with the computer-based instructional program with a mean score of 4.69 (SD=0.53) for use of graphics, 4.70 (SD=0.56) for instructional content, and 4.45 (SD=0.67) for the learning process. The mean difference of mental effort (1.50) between the two presentation formats was significant, t=8.26, p≤.0001, df=76, for two-tailed distribution. Consistent with cognitive load theory, innovative computer-based instructional strategies decrease extraneous cognitive load compared with traditional paper-based instructional strategies.

Overview of research trends and problems on Cr-Mo low alloy steels for pressure vessel

International Nuclear Information System (INIS)

Chi, Byung Ha; Kim, Jeong Tae

2000-01-01

Cr-Mo low alloy steels have been used for a long time for pressure vessel due to its excellent corrosion resistance, high temperature strength and toughness. The paper reviewed the latest trends on material development and some problems on Cr-Mo low alloy steel for pressure vessel, such as elevated temperature strength, hardenability, synergetic effect between temper and hydrogen embrittlement, hydrogen attack and hydrogen induced disbonding of overlay weld-cladding

Strength development in concrete with wood ash blended cement and use of soft computing models to predict strength parameters

Directory of Open Access Journals (Sweden)

S. Chowdhury

2015-11-01

Full Text Available In this study, Wood Ash (WA prepared from the uncontrolled burning of the saw dust is evaluated for its suitability as partial cement replacement in conventional concrete. The saw dust has been acquired from a wood polishing unit. The physical, chemical and mineralogical characteristics of WA is presented and analyzed. The strength parameters (compressive strength, split tensile strength and flexural strength of concrete with blended WA cement are evaluated and studied. Two different water-to-binder ratio (0.4 and 0.45 and five different replacement percentages of WA (5%, 10%, 15%, 18% and 20% including control specimens for both water-to-cement ratio is considered. Results of compressive strength, split tensile strength and flexural strength showed that the strength properties of concrete mixture decreased marginally with increase in wood ash contents, but strength increased with later age. The XRD test results and chemical analysis of WA showed that it contains amorphous silica and thus can be used as cement replacing material. Through the analysis of results obtained in this study, it was concluded that WA could be blended with cement without adversely affecting the strength properties of concrete. Also using a new statistical theory of the Support Vector Machine (SVM, strength parameters were predicted by developing a suitable model and as a result, the application of soft computing in structural engineering has been successfully presented in this research paper.

The Gap in Big Data: Getting to Wellbeing, Strengths, and a Whole-person Perspective.

Science.gov (United States)

Monsen, Karen A; Peters, Judith; Schlesner, Sara; Vanderboom, Catherine E; Holland, Diane E

2015-05-01

Electronic health records (EHRs) provide a clinical view of patient health. EHR data are becoming available in large data sets and enabling research that will transform the landscape of healthcare research. Methods are needed to incorporate wellbeing dimensions and strengths in large data sets. The purpose of this study was to examine the potential alignment of the Wellbeing Model with a clinical interface terminology standard, the Omaha System, for documenting wellbeing assessments. To map the Omaha System and Wellbeing Model for use in a clinical EHR wellbeing assessment and to evaluate the feasibility of describing strengths and needs of seniors generated through this assessment. The Wellbeing Model and Omaha System were mapped using concept mapping techniques. Based on this mapping, a wellbeing assessment was developed and implemented within a clinical EHR. Strengths indicators and signs/symptoms data for 5 seniors living in a residential community were abstracted from wellbeing assessments and analyzed using standard descriptive statistics and pattern visualization techniques. Initial mapping agreement was 93.5%, with differences resolved by consensus. Wellbeing data analysis showed seniors had an average of 34.8 (range=22-49) strengths indicators for 22.8 concepts. They had an average of 6.4 (range=4-8) signs/symptoms for an average of 3.2 (range=2-5) concepts. The ratio of strengths indicators to signs/symptoms was 6:1 (range 2.8-9.6). Problem concepts with more signs/symptoms had fewer strengths. Together, the Wellbeing Model and the Omaha System have potential to enable a whole-person perspective and enhance the potential for a wellbeing perspective in big data research in healthcare.

Fatigue strength of repaired cracks in welded connections made of very high strength steels

NARCIS (Netherlands)

Akyel, A.

2017-01-01

For cyclically loaded structures, fatigue design becomes one of the important design criteria. The state of art shows that with modification of the conventional structural design methodology, the use of very high strength steels may have a positive effect on fatigue strength of welded connections.

Strength of Fibrous Composites

CERN Document Server

Huang, Zheng-Ming

2012-01-01

"Strength of Fibrous Composites" addresses evaluation of the strength of a fibrous composite by using its constituent material properties and its fiber architecture parameters. Having gone through the book, a reader is able to predict the progressive failure behavior and ultimate strength of a fibrous laminate subjected to an arbitrary load condition in terms of the constituent fiber and matrix properties, as well as fiber geometric parameters. The book is useful to researchers and engineers working on design and analysis for composite materials. Dr. Zheng-Ming Huang is a professor at the School of Aerospace Engineering & Applied Mechanics, Tongji University, China. Mr. Ye-Xin Zhou is a PhD candidate at the Department of Mechanical Engineering, the University of Hong Kong, China.

Effect of Curing Temperature Histories on the Compressive Strength Development of High-Strength Concrete

Directory of Open Access Journals (Sweden)

Keun-Hyeok Yang

2015-01-01

Full Text Available This study examined the relative strength-maturity relationship of high-strength concrete (HSC specifically developed for nuclear facility structures while considering the economic efficiency and durability of the concrete. Two types of mixture proportions with water-to-binder ratios of 0.4 and 0.28 were tested under different temperature histories including (1 isothermal curing conditions of 5°C, 20°C, and 40°C and (2 terraced temperature histories of 20°C for an initial age of individual 1, 3, or 7 days and a constant temperature of 5°C for the subsequent ages. On the basis of the test results, the traditional maturity function of an equivalent age was modified to consider the offset maturity and the insignificance of subsequent curing temperature after an age of 3 days on later strength of concrete. To determine the key parameters in the maturity function, the setting behavior, apparent activation energy, and rate constant of the prepared mixtures were also measured. This study reveals that the compressive strength development of HSC cured at the reference temperature for an early age of 3 days is insignificantly affected by the subsequent curing temperature histories. The proposed maturity approach with the modified equivalent age accurately predicts the strength development of HSC.

Strength training for children and adolescents.

Science.gov (United States)

Faigenbaum, A D

2000-10-01

The potential benefits of youth strength training extend beyond an increase in muscular strength and may include favorable changes in selected health- and fitness-related measures. If appropriate training guidelines are followed, regular participation in a youth strength-training program has the potential to increase bone mineral density, improve motor performance skills, enhance sports performance, and better prepare our young athletes for the demands of practice and competition. Despite earlier concerns regarding the safety and efficacy of youth strength training, current public health objectives now aim to increase the number of boys and girls age 6 and older who regularly participate in physical activities that enhance and maintain muscular fitness. Parents, teachers, coaches, and healthcare providers should realize that youth strength training is a specialized method of conditioning that can offer enormous benefit but at the same time can result in serious injury if established guidelines are not followed. With qualified instruction, competent supervision, and an appropriate progression of the volume and intensity of training, children and adolescents cannot only learn advanced strength training exercises but can feel good about their performances, and have fun. Additional clinical trails involving children and adolescents are needed to further explore the acute and chronic effects of strength training on a variety of anatomical, physiological, and psychological parameters.

Effect of 8 weeks of free-weight and machine-based strength training on strength and power performance

OpenAIRE

Wirth Klaus; Keiner Michael; Hartmann Hagen; Sander Andre; Mickel Christoph

2016-01-01

Abstract The aim of this study was to evaluate the effectiveness of free-weight and machine-based exercises to increase different strength and speed-strength variables. One hundred twenty male participants (age: 23.8 ? 2.5 years; body height: 181.0 ? 6.8 cm; body mass: 80.2 ? 8.9 kg) joined the study. The 2 experimental groups completed an 8 week periodized strength training program that included 2 training sessions per week. The exercises that were used in the strength training programs were...

Induced defences alter the strength and direction of natural selection on reproductive traits in common milkweed.

Science.gov (United States)

Thompson, K A; Cory, K A; Johnson, M T J

2017-06-01

Evolutionary biologists have long sought to understand the ecological processes that generate plant reproductive diversity. Recent evidence indicates that constitutive antiherbivore defences can alter natural selection on reproductive traits, but it is unclear whether induced defences will have the same effect and whether reduced foliar damage in defended plants is the cause of this pattern. In a factorial field experiment using common milkweed, Asclepias syriaca L., we induced plant defences using jasmonic acid (JA) and imposed foliar damage using scissors. We found that JA-induced plants experienced selection for more inflorescences that were smaller in size (fewer flowers), whereas control plants only experienced a trend towards selection for larger inflorescences (more flowers); all effects were independent of foliar damage. Our results demonstrate that induced defences can alter both the strength and direction of selection on reproductive traits, and suggest that antiherbivore defences may promote the evolution of plant reproductive diversity. © 2017 European Society For Evolutionary Biology. Journal of Evolutionary Biology © 2017 European Society For Evolutionary Biology.

Exploring issues and strengths of cross-cultural marriage among Korean immigrants.

Science.gov (United States)

Kim, Junhyoung; Park, Se-Hyuk; Kim, May; Kim, Su Yeon

2017-10-01

Cross-cultural marriages have continuously increased in the United States. In spite of this increase, further research is needed to address the paucity of literature on cross-cultural marriage, particularly, between immigrants and their indigenous spouses. In this study, we have focused on the cross-cultural marriages between female Korean immigrants who have married Americans, aiming to identify the positive and/or negative aspects of cross-cultural marriage from the Korean women themselves. For this purpose, semi-structured interviews were conducted on a total of 14 participants. Their ages ranged from 45 to 66 years (M D 52.5 years) and the average length of time since their immigration was 25 years. Each interview lasted between 45 and 120 min and, with participants' permission, were recorded and transcribed. Based on the participants' life experiences and personal statements, we divided our findings into two sections: (a) issues and problems of cross-cultural marriages, and (b) strengths of cross-cultural marriages. With regard to the issues and problems of cross-cultural marriages experienced by participants, three major themes were identified: (a) communication barriers, (b) cultural conflicts and misunderstandings, and (c) unclear cultural identities. The strengths of cross-cultural marriages were identified as: (a) development of coping strategies, and (b) improving cultural understanding. It appears that participants developed their own coping strategies and improved their cultural understanding in order to deal with the various stressors associated with cross-cultural marriage.

Obstetric synthetic oxytocin use and subsequent hyperactivity/inattention problems in Danish children

DEFF Research Database (Denmark)

Stokholm, Lonny; Juhl, Mette; Lønfeldt, Nicole N

2018-01-01

INTRODUCTION: The objective was to examine the association between obstetric synthetic oxytocin use and hyperactivity/inattention problems in offspring. MATERIAL AND METHODS: We identified children born in 2000-2003, enrolled in the Danish National Birth Cohort, with data on the Strengths and Dif...

The Effects of Isokinetic Strength Training on Strength at Different Angular Velocities: a Pilot Study

Directory of Open Access Journals (Sweden)

Tuğba Kocahan

2017-09-01

Conclusion: It was shown that angular velocity is important in isokinetic training, and that training at high angular velocities provides strength increases at lower angular velocities, but would not increase strength at angular velocities above the training level. For this reason, it is thought that in the preparation of an isokinetic strength training protocol, angular velocities need to be taken into account. For any athlete, the force at the angular velocity required in her/his sports branch needs to be considered.

Stochastic-Strength-Based Damage Simulation Tool for Ceramic Matrix Composite

Science.gov (United States)

Nemeth, Noel; Bednarcyk, Brett; Pineda, Evan; Arnold, Steven; Mital, Subodh; Murthy, Pappu

2015-01-01

Reported here is a coupling of two NASA developed codes: CARES (Ceramics Analysis and Reliability Evaluation of Structures) with the MAC/GMC (Micromechanics Analysis Code/ Generalized Method of Cells) composite material analysis code. The resulting code is called FEAMAC/CARES and is constructed as an Abaqus finite element analysis UMAT (user defined material). Here we describe the FEAMAC/CARES code and an example problem (taken from the open literature) of a laminated CMC in off-axis loading is shown. FEAMAC/CARES performs stochastic-strength-based damage simulation response of a CMC under multiaxial loading using elastic stiffness reduction of the failed elements.

Not by strength alone : children's conflict expectations follow the logic of the asymmetric war of attrition.

Science.gov (United States)

Pietraszewski, David; Shaw, Alex

2015-03-01

The Asymmetric War of Attrition (AWA) model of animal conflict in evolutionary biology (Maynard Smith and Parker in Nature, 246, 15-18, 1976) suggests that an organism's decision to withdraw from a conflict is the result of adaptations designed to integrate the expected value of winning, discounted by the expected costs that would be incurred by continuing to compete, via sensitivity to proximate cues of how quickly each side can impose costs on the other (Resource Holding Potential), and how much each side will gain by winning. The current studies examine whether human conflict expectations follow the formalized logic of this model. Children aged 6-8 years were presented with third-party conflict vignettes and were then asked to predict the likely winner. Cues of ownership, hunger, size, strength, and alliance strength were systematically varied across conditions. Results demonstrate that children's expectations followed the logic of the AWA model, even in complex situations featuring multiple, competing cues, such that the actual relative costs and benefits that would accrue during such a conflict were reflected in children's expectations. Control conditions show that these modifications to conflict expectations could not have resulted from more general experimental artifacts or demand characteristics. To test the selectivity of these effects to conflict, expectations of search effort were also assessed. As predicted, they yielded a different pattern of results. These studies represent one of the first experimental tests of the AWA model in humans and suggest that future research on the psychology of ownership, conflict, and value may be aided by formalized models from evolutionary biology.

Strength Testing in Motor Neuron Diseases.

Science.gov (United States)

Shefner, Jeremy M

2017-01-01

Loss of muscle strength is a cardinal feature of all motor neuron diseases. Functional loss over time, including respiratory dysfunction, inability to ambulate, loss of ability to perform activities of daily living, and others are due, in large part, to decline in strength. Thus, the accurate measurement of limb muscle strength is essential in therapeutic trials to best understand the impact of therapy on vital function. While qualitative strength measurements show declines over time, the lack of reproducibility and linearity of measurement make qualitative techniques inadequate. A variety of quantitative measures have been developed; all have both positive attributes and limitations. However, with careful training and reliability testing, quantitative measures have proven to be reliable and sensitive indicators of both disease progression and the impact of experimental therapy. Quantitative strength measurements have demonstrated potentially important therapeutic effects in both amyotrophic lateral sclerosis and spinobulbar muscular atrophy, and have been shown feasible in children with spinal muscular atrophy. The spectrum of both qualitative and quantitative strength measurements are reviewed and their utility examined in this review.

Strength functions for fragmented doorway states

International Nuclear Information System (INIS)

MacDonald, W.M.

1980-01-01

Coupling a strongly excited ''doorway state'' to weak ''hallway states'' distributes its strength into micro-resonances seen in differential cross sections taken with very good energy resolution. The distribution of strength is shown to be revealed by reduced widths of the K-matrix rather than by the imaginary part of poles of the S-matrix. Different strength functions (SF) constructed by averaging the K-matrix widths are then investigated to determine their dependences on energy and on parameters related to averages of microscopic matrix elements. A new sum rule on the integrated strength of these SF is derived and used to show that different averaging procedures actually distribute the strength differently. Finally, it is shown that the discontinuous summed strength defines spreading parameters for the doorway state only in strong coupling, where it approximates the idefinite integral of the continuous SF of MacDonald-Mekjian-Kerman-De Toledo Piza. A new method of ''parametric continuation'' is used to relate a discontinuous sliding box-average, or a finite sum, of discrete terms to a continous function

A multi-supplier sourcing problem with a preference ordering of suppliers

NARCIS (Netherlands)

Honhon, D.B.L.P.; Gaur, V.; Seshadri, S.

2012-01-01

We study a sourcing problem faced by a firm that seeks to procure a product or a component from a pool of alternative suppliers. The firm has a preference ordering of the suppliers based on factors such as their past performance, quality, service, geographical location, and financial strength, which

Wind turbine blade vibration at standstill conditions — the effect of imposing lag on the aerodynamic response of an elastically mounted airfoil

DEFF Research Database (Denmark)

Skrzypinski, Witold Robert; Gaunaa, Mac

2015-01-01

The present study investigated physical phenomena related to stall-induced vibrations potentially existing on wind turbine blades at standstill conditions. The study considered two-dimensional airfoil sections while it omitted three-dimensional effects. In the study, a new engineering-type...... computational model for the aeroelastic response of an elastically mounted airfoil was used to investigate the influence of temporal lag in the aerodynamic response on the aeroelastic stability in deep stall. The study indicated that even a relatively low lag significantly increases the damping of the model....... A comparison between the results from a model with lag imposed on all force components with the results from a model with lag imposed exclusively on the lift showed only marginal difference between the damping in the two cases. A parameter study involving positions of the elastic hinge point and the center...

Strength Training: For Overall Fitness

Science.gov (United States)

Healthy Lifestyle Fitness Strength training is an important part of an overall fitness program. Here's what strength training can do for ... is a key component of overall health and fitness for everyone. Lean muscle mass naturally diminishes with ...

Strength Assessment of Controlled Low Strength Materials (CLSM) Utilizing Recycled Concrete Aggregate and Waste Paper Sludge Ash

OpenAIRE

Ridzuan, Ahmad Ruslan Mohd; Fauzi, Mohd Azrizal; Ghazali, Ezliana; Arshad, Mohd Fadzil; Fauzi, Mohd Afiq; Mohd Fauzi, Mohd Afiq

2013-01-01

This paper studies the strength development of low-strength material (CLSM) is controlled by using waste paper sludge ash (WPSA) in CLSM mixtures without adding Portland cement. Series of four (4) compounds which is the CLSM containing 5%, 10%, 20% and 30% of waste paper sludge ash (WPSA) as a substitute for Portland cement. CLSM cubes the sizes of 100mm x 100mm x 100mm compressive strength were tested at age 7, 14 and 28days. It was found that this activity contributes to strength developmen...

Experimental knee joint pain during strength training and muscle strength gain in healthy subjects: a randomized controlled trial.

Science.gov (United States)

Sørensen, T J; Langberg, H; Hodges, P W; Bliddal, H; Henriksen, M

2012-01-01

Knee joint pain and reduced quadriceps strength are cardinal symptoms in many knee pathologies. In people with painful knee pathologies, quadriceps exercise reduces pain, improves physical function, and increases muscle strength. A general assumption is that pain compromises muscle function and thus may prevent effective rehabilitation. This study evaluated the effects of experimental knee joint pain during quadriceps strength training on muscle strength gain in healthy individuals. Twenty-seven healthy untrained volunteers participated in a randomized controlled trial of quadriceps strengthening (3 times per week for 8 weeks). Participants were randomized to perform resistance training either during pain induced by injections of painful hypertonic saline (pain group, n = 13) or during a nonpainful control condition with injection of isotonic saline (control group, n = 14) into the infrapatellar fat pad. The primary outcome measure was change in maximal isokinetic muscle strength in knee extension/flexion (60, 120, and 180 degrees/second). The group who exercised with pain had a significantly larger improvement in isokinetic muscle strength at all angular velocities of knee extension compared to the control group. In knee flexion there were improvements in isokinetic muscle strength in both groups with no between-group differences. Experimental knee joint pain improved the training-induced gain in muscle strength following 8 weeks of quadriceps training. It remains to be studied whether knee joint pain has a positive effect on strength gain in patients with knee pathology. Copyright © 2012 by the American College of Rheumatology.

Optimal Placement of Actors in WSANs Based on Imposed Delay Constraints

Directory of Open Access Journals (Sweden)

Chunxi Yang

2014-01-01

Full Text Available Wireless Sensor and Actor Networks (WSANs refer to a group of sensors and actors linked by wireless medium to probe environment and perform specific actions. Such certain actions should always be taken before a deadline when an event of interest is detected. In order to provide such services, the whole monitor area is divided into several virtual areas and nodes in the same area form a cluster. Clustering of the WSANs is often pursued to give that each actor acts as a cluster-head. The number of actors is related to the size and the deployment of WSANs cluster. In this paper, we find a method to determine the accurate number of actors which enables them to receive data and take actions in an imposed time-delay. The k-MinTE and the k-MaxTE clustering algorithm are proposed to form the minimum and maximum size of cluster, respectively. In those clustering algorithms, actors are deployed in such a way that sensors could route data to actors within k hops. Then, clusters are arranged by the regular hexagon. At last, we evaluate the placement of actors and results show that our approach is effective.

Bi-national cross-validation of an evidence-based conduct problem prevention model.

Science.gov (United States)

Porta, Carolyn M; Bloomquist, Michael L; Garcia-Huidobro, Diego; Gutiérrez, Rafael; Vega, Leticia; Balch, Rosita; Yu, Xiaohui; Cooper, Daniel K

2018-04-01

To (a) explore the preferences of Mexican parents and Spanish-speaking professionals working with migrant Latino families in Minnesota regarding the Mexican-adapted brief model versus the original conduct problems intervention and (b) identifying the potential challenges, and preferred solutions, to implementation of a conduct problems preventive intervention. The core practice elements of a conduct problems prevention program originating in the United States were adapted for prevention efforts in Mexico. Three focus groups were conducted in the United States, with Latino parents (n = 24; 2 focus groups) and professionals serving Latino families (n = 9; 1 focus group), to compare and discuss the Mexican-adapted model and the original conduct problems prevention program. Thematic analysis was conducted on the verbatim focus group transcripts in the original language spoken. Participants preferred the Mexican-adapted model. The following key areas were identified for cultural adaptation when delivering a conduct problems prevention program with Latino families: recruitment/enrollment strategies, program delivery format, and program content (i.e., child skills training, parent skills training, child-parent activities, and child-parent support). For both models, strengths, concerns, barriers, and strategies for overcoming concerns and barriers were identified. We summarize recommendations offered by participants to strengthen the effective implementation of a conduct problems prevention model with Latino families in the United States. This project demonstrates the strength in binational collaboration to critically examine cultural adaptations of evidence-based prevention programs that could be useful to diverse communities, families, and youth in other settings. (PsycINFO Database Record (c) 2018 APA, all rights reserved).

Strength problems and ordering of nonstoichiometric monocarbides and mononitrides of subgroup 4a i 5a transition metals

International Nuclear Information System (INIS)

Manukhin, A.V.; Lopatin, P.B.

1995-01-01

Consideration is given to graphical concentration dependences of flexural strength limit of TiC x and VC x monocarbides, ZrN x mononitride and to the relationship between these dependences and phenomena of nonmetallic vacancy ordering in mentioned compounds. The assumption about existence of the second ordered structure in TiC x titanium monocarbide and ordered structure in ZrN x zirconium mononitride (0.78...0.8 < x < 0.9...0.95) was supported. 15 refs.; 4 figs

Does psychological strengths and subjective well-being predicting parental involvement and problem solving among Malaysian and Indian students?

OpenAIRE

Khan, Aqeel; Ahmad, Roslee; Hamdan, Abdul Rahim; Mustaffa, Mohamed Sharif; Tahir, Lokman Mohd

2014-01-01

The present study examined the predictors of psychological strengths and subjective well-being for dealing with academic stress perceived by university engineering students. Sample of 400 Malaysian (N?=?180 boys and N?=?220 girls) age varies 18 to 25?years and 400 Indian students (N?=?240 boys and N?=?160 girls) age varies 18 to 25?years from public universities were participated. Quantitative method was used for data analysis. Findings shows that gender, religiosity and socioeconomic status ...

Modification of Rule of Mixtures for Tensile Strength Estimation of Circular GFRP Rebars

Directory of Open Access Journals (Sweden)

Young-Jun You

2017-12-01

Full Text Available The rule of mixtures (ROM method is often used to estimate the tensile strength of fiber reinforced polymers (FRPs reinforcing bars (rebars. Generally, the ROM method predicts the FRP rebars’ modulus of elasticity adequately but overestimates their tensile strength. This may result from defects occurred during manufacture that prevent the used materials from exhibiting a sound performance and the shear-lag phenomenon by transmission of external forces through the surface of the rebar having a circular cross section. Due to the latter, there is a difference in fiber breaking points regarding the fibers located on the surface and fibers located at the center, and thus results in differences between the values calculated from the conventional ROM and the experimental result. In this study, for the purpose of resolving the problem, glass FRP (GFRP rebars were shaped to have a hollow section at the center of their cross sections and were further subject to tensile strength tests. The test results were further placed under regression analysis and a modified ROM within ±5% accuracy compared to the experimental value was proposed for GFRP rebars with 13, 16, and 19 mm diameters.

Correlation between compressive strength and ultrasonic pulse velocity of high strength concrete incorporating chopped basalt fibre

Science.gov (United States)

Shafiq, Nasir; Fadhilnuruddin, Muhd; Elshekh, Ali Elheber Ahmed; Fathi, Ahmed

2015-07-01

Ultrasonic pulse velocity (UPV), is considered as the most important test for non-destructive techniques that are used to evaluate the mechanical characteristics of high strength concrete (HSC). The relationship between the compressive strength of HSC containing chopped basalt fibre stands (CBSF) and UPV was investigated. The concrete specimens were prepared using a different ratio of CBSF as internal strengthening materials. The compressive strength measurements were conducted at the sample ages of 3, 7, 28, 56 and 90 days; whilst, the ultrasonic pulse velocity was measured at 28 days. The result of HSC's compressive strength with the chopped basalt fibre did not show any improvement; instead, it was decreased. The UPV of the chopped basalt fibre reinforced concrete has been found to be less than that of the control mix for each addition ratio of the basalt fibre. A relationship plot is gained between the cube compressive strength for HSC and UPV with various amounts of chopped basalt fibres.

Dataset of the relationship between unconfined compressive strength and tensile strength of rock mass

International Nuclear Information System (INIS)

Sugita, Yutaka; Yui, Mikazu

2002-02-01

This report summary the dataset of the relationship between unconfined compressive strength and tensile strength of the rock mass described in supporting report 2; repository design and engineering technology of second progress report (H12 report) on research and development for the geological disposal of HLW in Japan. (author)

CFC environmental problems and cooling technology

International Nuclear Information System (INIS)

Hornung, M.O.

1991-08-01

The aim of the report is to provide a broad survey of the technological problems imposed on the production of cooling systems by the demands for reduction in the use of chlorofluorocarbons as refrigerants. With regard to industrial research in this area the present situation is clarified and possible future developments are discussed. The influence of CFC gasses on the global environment and international and national legislation within this field are explained. Alternative refrigerants and cooling processes, and ways of reducing refrigerant leakage, are described. It is concluded that currently the use of alternative refrigerants is the policy which is generally accepted, and intensive research is being carried out in this field. R134a should substitute R12 in the cases of household refrigerators and air conditioning, and will soon be commercially available. The use of R22 and ammonia will be extended. This is a practical policy to follow up commercially, whereas the policy of alternative processes presents more problems because they are not so developed and there is less available know-how in this area. The possibilities for hermetic sealing of cooling systems are unrealistic and should anyway be regarded only as a supplement to alternative refrigerants. Within the European Community it is intended to provide standards and regulations in relation to air pollution from refrigerants. (AB) (58 refs.)

Improving Strength-Ductility Balance of High Strength Dual-Phase Steels by Addition of Vanadium

Science.gov (United States)

Gong, Yu; Hua, M.; Uusitalo, J.; DeArdo, A. J.

For galvanized or galvannealed steels to be commercially successful, they must exhibit several attributes: (i) easy and inexpensive processing in the hot mill, cold mill and on the coating line, (ii) high strength with good formability and spot weldability, and (iii) good corrosion resistance, especially after cold forming. For good corrosion resistance, the coating must have sufficient coverage, be of uniform thickness, and most importantly, the coating must survive the cold stamping or forming operation. The purpose of this paper is to present research aiming at improving the steel substrate, such that high strength can be obtained while maintaining good global formability (tensile ductility), local formability (sheared-edge ductility), and good spot weldability. It is well-known that the strength of DP steels is controlled by several factors, including the amount of martensite found in the final microstructure. Recent research has revealed that the amount of austenite formed during intercritical annealing can be strongly influenced by the annealing temperature and the pre-annealing conditions of the hot band (coiling temperature) and cold band (% cold reduction). Current experiments have explored the combination of pre-annealing conditions and four annealing practices to help define the best practice to optimize the strength-formability balance in these higher strength DP steels. The steels used in these experiments contained (i) low carbon content for good spot weldability, (ii) the hardenability additions Mo and Cr for strength, and (iii) V for grain refinement, precipitation hardening and temper resistance. When processed correctly, these steels exhibited UTS levels up to 1000MPa, total elongation to 25%, reduction in area to 45%, and Hole Expansion Ratios to 50%. The results of this program will be presented and discussed.

The pair potential approach for interfaces: Fundamental problems and practical solutions

International Nuclear Information System (INIS)

Maggs, A.C.; Ashcroft, N.W.

1987-09-01

A fundamental problem in the use of a central pair-force model for defect problems is that it omits three-body and higher terms which are necessarily present in real systems. Electronic fluctuation effects are also usually omitted. While these can be small in the simple metals, they are significant in noble and transition metals, as shown by a simple real space argument. To guage the importance of their effects in interface problems, the structure of a simple sum 5 twist boundary is examined, with the atoms described by both pair- and three-center interactions and as a function of the relative strength of the two. 15 refs

The vulnerability to suicidal behavior is associated with reduced connectivity strength

Directory of Open Access Journals (Sweden)

Stijn eBijttebier

2015-11-01

Full Text Available Suicidal behavior constitutes a major public health problem. Based on the stress–diathesis model, biological correlates of a diathesis might help to predict risk after stressor-exposure. Structural changes in cortical and subcortical areas and their connections have increasingly been linked with the diathesis. The current study identified structural network changes associated with a diathesis using a whole-brain approach by examining the structural connectivity between regions in euthymic suicide attempters. In addition, the association between connectivity measures, clinical and genetic characteristics was investigated. We hypothesized that suicide attempters showed lower connectivity strength, associated with an increased severity of general clinical characteristics and an elevated expression of short alleles in serotonin polymorphisms.Thirteen euthymic suicide attempters (SA were compared with fifteen euthymic non-attempters and seventeen healthy controls. Clinical characteristics and three serotonin-related genetic polymorphisms were assessed. Diffusion MRI together with anatomical scans were administered. Preprocessing was performed using Explore DTI. Whole brain tractography of the diffusion-weighted images was followed by a number of streamlines-weighted network analysis using NBS.The network analysis revealed decreased connectivity strength in SA in the connections between the left olfactory cortex and left anterior cingulate gyrus. Furthermore, SA had increased suicidal ideation, hopelessness and self-reported depression, but did not show any differences for the genetic polymorphisms. Finally, lower connectivity strength between the right calcarine fissure and the left middle occipital gyrus was associated with increased trait anxiety severity (rs=-0.78, p<0.01 and hopelessness (rs=-0.76, p<0.01.SA showed differences in white matter network connectivity strength associated with clinical characteristics. Together, these variables could

Which strengths-based practice? Reconciling strengths-based practice and mandated authority in child protection work.

Science.gov (United States)

Oliver, Carolyn; Charles, Grant

2015-04-01

The recent application of strengths-based practice in child protection settings has been accompanied by evidence of inconsistent implementation and concerns that the approach is incompatible with statutory work. Few studies have moved beyond asking whether child protection workers are implementing strengths-based practice to explore why the approach is enacted as it is. This article describes a mixed methods study using an online survey and interviews to elicit from 225 statutory child protection workers in a large Canadian agency how they applied strengths-based ideas and why they did what they did. The authors found that although strengths-based practice was popular, 70 percent of participants believed that it was not always applicable to child protection work. Participants described five distinct versions of the approach, only one of which was fully congruent with their mandated role. The study suggests that the common conflation of strengths-based and solution-focused approaches ignores important differences in the conceptualization of practitioner authority and leaves practitioners attempting to implement versions ofstrengths-based practice that do not fit statutory child protection work. Only when practitioners choose solution-focused models that support their use of mandated authority is consistent implementation a reasonable expectation.

Internalizing and Externalizing Problems in Immigrant Boys and Girls: Comparing Native Dutch and Moroccan Immigrant Adolescents across Time

Science.gov (United States)

Paalman, Carmen; van Domburgh, Lieke; Stevens, Gonneke; Vermeiren, Robert; van de Ven, Peter; Branje, Susan; Frijns, Tom; Meeus, Wim; Koot, Hans; van Lier, Pol; Jansen, Lucres; Doreleijers, Theo

2015-01-01

This longitudinal study explores differences between native Dutch and immigrant Moroccan adolescents in the relationship between internalizing and externalizing problems across time. By using generalized estimating equations (GEE), the strength and stability of associations between internalizing and externalizing problems in 159 Moroccan and 159…

Adolescents with a history of specific language impairment (SLI): strengths and difficulties in social, emotional and behavioral functioning.

Science.gov (United States)

Conti-Ramsden, Gina; Mok, Pearl L H; Pickles, Andrew; Durkin, Kevin

2013-11-01

Adolescents with specific language impairment (SLI) are at a greater risk of emotional and behavioral problems compared to their typically developing (TD) peers, but little is known about their self-perceived strengths and difficulties. In this study, the self-reported social, emotional and behavioral functioning of 139 adolescents with a history of SLI and 124 TD individuals at age 16 was examined. The self-report version of the Strengths and Difficulties Questionnaire (SDQ) was used to assess their prosocial behavior and levels of peer, emotional and behavioral difficulties. Associations of these areas of functioning with gender, verbal and non-verbal skills were also investigated. Adolescents with a history of SLI were more likely than their TD peers to report higher levels of peer problems, emotional symptoms, hyperactivity and conduct problems. The majority of adolescents in both groups (87% SLI and 96% TD), however, reported prosocial behavior within the typical range. Difficulty with peer relations was the strongest differentiator between the groups, with the odds of reporting borderline or abnormally high levels of peer problems being 12 times higher for individuals with a history of SLI. Adolescents with poorer receptive language skills were also more likely to report higher levels of emotional and behavioral difficulties. The findings of this study identify likely traits that may lead to referral to services. Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.

CORRELATION BETWEEN BODY MASS INDEX AND HANDGRIP STRENGTH AND HANDGRIP ENDURANCE AMONG YOUNG HEALTHY ADULTS

Directory of Open Access Journals (Sweden)

Anupi

2015-07-01

Full Text Available BACKGROUND: Physical inactivity has become a serious problem all over the world. Handgrip Strength (a form of isometric static contraction test, is an important test to evaluate the physical fitness and nutritional status of an individua l. A number of factors like a ge, gender, body size, effort, skeletal muscle bulk and contractility may affect the handgrip strength (HGS and handgrip endurance (HGE. AIM: This study was conducted to establish the possible correlation (if any between body mass index and handgrip str ength and endurance among young healthy adults. MATERIALS AND METHODS: A population based cross - sectional study comprising of 200 students (both male and female, age group - 18 - 22 yrs was carried out in the Department of Physiology, Jorhat Medical College. Anthropometric parameters like height and weight were taken to evaluate the BMI and handgrip strength and handgrip endurance were taken by using handgrip dynamometer. According to WHO classification of BMI, subjects were categorized into three groups as un derweight BMI ≤18.5 kg/m 2 , normal weight BMI 18.5 - 24.9 kg/m 2 and overweight BMI≥ 24.9 kg/m 2 . Gender wise difference was analyzed by unpaired t test. Statistical analysis for correlation was done by using Karl Pearson’s Correlation Coefficient denoted by(r. RESULT: Males had higher handgrip strength and handgrip endurance than females. Statistic ally significant correlation was found between BMI and handgrip strength & endurance in underweight & overweight subjects. Gender differences in correlation were observed in correlation between BMI & HGS and HGE. CONCLUSION: The observed influence of BMI a nd gender differences in correlation between BMI and HGS and HGE indicate that besides BMI several other factors like effort, strength, muscular contractility etc . affect muscular strength & endurance in young males and females.

Effect of grain size and cold working on high temperature strength of Hastelloy X

International Nuclear Information System (INIS)

Fujioka, J.; Murase, H.; Matsuda, S.

1980-01-01

Effect of grain size and cold working on creep, creep rupture, low cycle fatigue and tensile strengths of Hastelloy X were studied at temperatures ranging from 800 to 1000 0 C. In order to apply these data to design, the allowable design stresses were estimated by expanding the criteria of ASME Code Case 1592 to such a high temperature range. The allowable design stress increased, on the other hand, the low cycle fatigue life decreased with increasing grain size. Cold working up to a ratio of 5 per cent may not be a serious problem in design, because the allowable design stress and the fatigue life were little affected. The cause of these variations in strength was discussed by examining the initiation and growth of cracks, and the microstructures. (author)

Hip strength assessment using handheld dynamometry is subject to intertester bias when testers are of different sex and strength

DEFF Research Database (Denmark)

Thorborg, K; Bandholm, T; Schick, M

2013-01-01

Handheld dynamometry (HHD) is a promising tool for obtaining reliable hip strength measurements in the clinical setting, but intertester reliability has been questioned, especially in situations where testers exhibit differences in upper-extremity muscle strength (male vs female). The purpose...... of this study was to examine the intertester reliability concerning strength assessments of hip abduction, adduction, external and internal rotation, flexion and extension using HHD, and to test whether systematic differences in test values exist between testers of different upper-extremity strength. Fifty...... healthy individuals (29 women), aged 25 ± 5 years were included. Two physiotherapist students (one female, one male) of different upper-extremity strength performed the measurements. The tester order and strength test order were randomized. Intraclass correlation coefficients were used to quantify...

Constrained Null Space Component Analysis for Semiblind Source Separation Problem.

Science.gov (United States)

Hwang, Wen-Liang; Lu, Keng-Shih; Ho, Jinn

2018-02-01

The blind source separation (BSS) problem extracts unknown sources from observations of their unknown mixtures. A current trend in BSS is the semiblind approach, which incorporates prior information on sources or how the sources are mixed. The constrained independent component analysis (ICA) approach has been studied to impose constraints on the famous ICA framework. We introduced an alternative approach based on the null space component (NCA) framework and referred to the approach as the c-NCA approach. We also presented the c-NCA algorithm that uses signal-dependent semidefinite operators, which is a bilinear mapping, as signatures for operator design in the c-NCA approach. Theoretically, we showed that the source estimation of the c-NCA algorithm converges with a convergence rate dependent on the decay of the sequence, obtained by applying the estimated operators on corresponding sources. The c-NCA can be formulated as a deterministic constrained optimization method, and thus, it can take advantage of solvers developed in optimization society for solving the BSS problem. As examples, we demonstrated electroencephalogram interference rejection problems can be solved by the c-NCA with proximal splitting algorithms by incorporating a sparsity-enforcing separation model and considering the case when reference signals are available.

The disciplined healthcare professional: a qualitative interview study on the impact of the disciplinary process and imposed measures in the Netherlands

NARCIS (Netherlands)

Verhoef, L.M.; Weenink, J.W.; Winters, S.; Robben, P.B.; Westert, G.P.; Kool, R.B.

2015-01-01

OBJECTIVE: It is known that doctors who receive complaints may have feelings of anger, guilt, shame and depression, both in the short and in the long term. This might lead to functional impairment. Less is known about the impact of the disciplinary process and imposed measures. Previous studies of

The factor structure of the Strengths and Difficulties Questionnaire (SDQ in Greek adolescents

Directory of Open Access Journals (Sweden)

Rotsika Vasiliki

2009-08-01

Full Text Available Abstract Background The Strengths and Difficulties Questionnaire (SDQ is a practical, economic and user-friendly screening instrument of emotional and behavioural problems in children and adolescents. This study was aimed primarily at evaluating the factor structure of the Greek version of the SDQ. Methods A representative nationwide sample of 1,194 adolescents (11 to 17 years old completed the questionnaire. Confirmatory factor analysis (CFA was conducted to assess the factor structure of the SDQ. Results CFA supported the original five-factor structure. The modification of the model provided some improvements. Internal consistency was acceptable for total difficulties, emotional symptoms and prosocial behaviour scale, moderate for hyperactivity/inattention scale and inadequate for peer and conduct problems scale. Older adolescents (aged 15 to 17 years reported more hyperactivity/inattention and conduct problems than younger ones (aged 11 to 14 years and girls reported more emotional symptoms and less prosocial behaviour problems than boys. Adolescents of low socioeconomic status (SES reported more difficulties than those of medium and high SES. Conclusion The Greek SDQ could be potentially considered as a community-wide screening instrument for adolescents' emotional and behavioural problems.

Flat punch adhesion: transition from fracture-based to strength-limited pull-off

International Nuclear Information System (INIS)

Jiang, Yijie; Turner, Kevin T; Grierson, David S

2014-01-01

The adhesion of a cylindrical flat punch to a surface due to interatomic forces is a well-known problem that is important in many applications, including indentation experiments and the adhesion of fibrillar structures. Traditionally, the pull-off force has been related to the work of adhesion and punch geometry via the Kendall solution that uses a Griffith energy balance to assess crack propagation and pull-off. More recently, it has been shown that under certain conditions, notably at small punch diameters, the contact can behave in a ‘strength-limited’ fashion in which the interface separates uniformly rather than via crack propagation. Here, a Maugis-Dugdale-type analysis of power-law-shaped bodies in contact is used to examine the change in behaviour from the fracture-based Kendall solution to strength-limited pull-off for cylindrical flat punches. The transition from fracture-based to strength-limited behaviour is described in terms of a non-dimensional parameter that is similar to previous quantities used to describe the transition and is a function of the punch size, the elasticity of the contact, and the adhesion properties. The results of this relatively simple analysis compare favourably with results from more complex computational simulations. In addition, the results are used to develop a function that quantifies the transition between the Kendall solution and the strength-limited solution in order to facilitate interpretation of adhesion measurements in the transition regime between the two limits. Finally, the power-law analysis is used to assess the sensitivity of the transition to the exact shape of the punch. (paper)

Tribal communities and coal in Northeast India: The politics of imposing and resisting mining bans

International Nuclear Information System (INIS)

McDuie-Ra, Duncan; Kikon, Dolly

2016-01-01

Bans on coal mining have been implemented in two tribal majority states in India's north-east frontier; Nagaland and Meghalaya. In Nagaland the state government imposed the ban in an attempt to capture control of coal extraction and trade, while in Meghalaya India's National Green Commission imposed the ban over concern for the environment and labour conditions. In both cases local communities have opposed the bans, and in some areas resumed mining under the authority of tribal councils and powerful civil society actors. In this paper we explore the politics of coal extraction that resulted in these bans and the response of communities and authorities. In doing so we made three main arguments that contribute to understanding of coal and communities in frontier regions where state control is partial and the legacy of armed conflict is powerful. First, in both locations the majority of the coal mining activity has been initiated and managed by members of tribal communities rather than profit-driven outsiders. Second, in contrast to other contexts in India (notably Orissa and Jharkhand) where large state or private enterprises seek to modify the law to enable coal extraction, in Nagaland and Meghalaya it has been communities that resent and challenge state and national laws being applied to their lands. Third, the right to extract coal is connected to the right of tribal communities to determine what happens on their lands. - Highlights: • Tribal communities initiate and manage coal mining in Nagaland and Meghalaya. • Laws banning coal extraction have been challenged and resisted by local communities. • The right to extract coal is tied to protecting tribal land rights. • Tribal autonomy in coal policy is progressive, yet enables capture by local elites. • Where there has been regulation of coal mining it has come from unexpected sources.

Imaging Shear Strength Along Subduction Faults

Science.gov (United States)

Bletery, Quentin; Thomas, Amanda M.; Rempel, Alan W.; Hardebeck, Jeanne L.

2017-11-01

Subduction faults accumulate stress during long periods of time and release this stress suddenly, during earthquakes, when it reaches a threshold. This threshold, the shear strength, controls the occurrence and magnitude of earthquakes. We consider a 3-D model to derive an analytical expression for how the shear strength depends on the fault geometry, the convergence obliquity, frictional properties, and the stress field orientation. We then use estimates of these different parameters in Japan to infer the distribution of shear strength along a subduction fault. We show that the 2011 Mw9.0 Tohoku earthquake ruptured a fault portion characterized by unusually small variations in static shear strength. This observation is consistent with the hypothesis that large earthquakes preferentially rupture regions with relatively homogeneous shear strength. With increasing constraints on the different parameters at play, our approach could, in the future, help identify favorable locations for large earthquakes.

Imaging shear strength along subduction faults

Science.gov (United States)

Bletery, Quentin; Thomas, Amanda M.; Rempel, Alan W.; Hardebeck, Jeanne L.

2017-01-01

Subduction faults accumulate stress during long periods of time and release this stress suddenly, during earthquakes, when it reaches a threshold. This threshold, the shear strength, controls the occurrence and magnitude of earthquakes. We consider a 3-D model to derive an analytical expression for how the shear strength depends on the fault geometry, the convergence obliquity, frictional properties, and the stress field orientation. We then use estimates of these different parameters in Japan to infer the distribution of shear strength along a subduction fault. We show that the 2011 Mw9.0 Tohoku earthquake ruptured a fault portion characterized by unusually small variations in static shear strength. This observation is consistent with the hypothesis that large earthquakes preferentially rupture regions with relatively homogeneous shear strength. With increasing constraints on the different parameters at play, our approach could, in the future, help identify favorable locations for large earthquakes.

Compressive and flexural strength of concrete containing palm oil biomass clinker and polypropylene fibres

Science.gov (United States)

Ibrahim, M. H. Wan; Mangi, Sajjad Ali; Burhanudin, M. K.; Ridzuan, M. B.; Jamaluddin, N.; Shahidan, S.; Wong, YH; Faisal, SK; Fadzil, M. A.; Ramadhansyah, P. J.; Ayop, S. S.; Othman, N. H.

2017-11-01

This paper presents the effects of using palm oil biomass (POB) clinker with polypropylene (PP) fibres in concrete on its compressive and flexural strength performances. Due to infrastructural development works, the use of concrete in the construction industry has been increased. Simultaneously, it raises the demand natural sand, which causes depletion of natural resources. While considering the environmental and economic benefits, the utilization of industrial waste by-products in concrete will be the alternative solution of the problem. Among the waste products, one of such waste by-product is the palm oil biomass clinker, which is a waste product from burning processes of palm oil fibres. Therefore, it is important to utilize palm oil biomass clinker as partial replacement of fine aggregates in concrete. Considering the facts, an experimental study was conducted to find out the potential usage of palm oil fibres in concrete. In this study, total 48 number of specimens were cast to evaluate the compressive and flexural strength performances. Polypropylene fibre was added in concrete at the rate of 0.2%, 0.4% and 0.6%, and sand was replaced at a constant rate of 10% with palm oil biomass clinker. The flexural strength of concrete was noticed in the range of 2.25 MPa and 2.29 MPa, whereas, the higher value of flexural strength was recorded with 0.4% polypropylene fibre addition. Hence, these results show that the strength performances of concrete containing POB clinker could be improved with the addition of polypropylene fibre.