str reactor split table: Topics by WorldWideScience.org

Sample records for str reactor split table

Pilot study for early prognosis of Azoospermia in relation to Y-STR ...

African Journals Online (AJOL)

Ahmed M. Refaat

2015-07-06

Jul 6, 2015 ... Azoospermia condition, which supports the idea of using Y-STR Profiling in early prognosis of ... feedback loop is interrupted (lack of feedback inhibition on. FSH). ..... From the statistical results represented in Tables 1–12, we.
Thermal-hydraulic mixing in the split-core ANS reactor design

International Nuclear Information System (INIS)

Dorning, R.J.J.

1988-01-01

A design has been proposed for the advanced neutron source (ANS) reactor that incorporates a split core, one purpose of which is to create a mixing plenum between the upper and lower cores. It was hoped that in addition to introducing various desirable neutronics features, such as decreasing the fast neutron flux contamination of thermal and cold neutron beams located in the reactor midplane, this mixing plenum would make possible higher operating powers by lowering the maximum core temperature. This lower temperature was to be achieved as a result of the mixing, of the hot D 2 O coolant exiting the upper-core channels, and the cold D 2 O leaving the large upper core bypass. It was expected that this mixing would bring about a significantly reduced lower core maximum coolant inlet temperature. The authors have carried out large-scale computer calculations to determine the extent to which this mixing occurs in current split-core design geometry, which does not incorporate baffles, mixing devices, or other design features introduced to enhance mixing. The large-scale self-consistent calculations summarized here indicate that innovative design ideas to enhance mixing will be necessary if the split-core concept is to achieve the amount of thermal mixing needed to make possible significantly higher power operation and corresponding higher flux sources
Design of GA thermochemical water-splitting process for the Mirror Advanced Reactor System

International Nuclear Information System (INIS)

Brown, L.C.

1983-04-01

GA interfaced the sulfur-iodine thermochemical water-splitting cycle to the Mirror Advanced Reactor System (MARS). The results of this effort follow as one section and part of a second section to be included in the MARS final report. This section describes the process and its interface to the reactor. The capital and operating costs for the hydrogen plant are described
Electric arc apparatus for severing split-pin assemblies of guide tubes of nuclear reactors

International Nuclear Information System (INIS)

Burns, D.C.; Kauric, C.E.; Persang, J.C.

1987-01-01

This patent describes an apparatus for use in the replacement of an old split-pin assembly of a guide tube of a nuclear reactor by a new split-pin assembly, the old split-pin assembly including an old split pin and an old nut securing the old split pin to the guide tube, the old split-pin assembly and the guide tube being radioactive. The apparatus includes a metal disintegration machining tool, the tool having an electrode, means for mounting the tool submerged in a pool of water in engagement with the guide tube and with the old split-pin assembly secured to the guide tube, the tool being so mounted with the electrode in position to coact electrically with the last-named old split-pin assembly but not with the guide tube, and means, connected to the tool, for firing a disintegrating arc between the electrode and the assembly to disintegrate the assembly into readily removable fragments
Split core experiments; Part I. Axial neutron flux distribution measurements in the reactor core with a central horizontal reflector

Energy Technology Data Exchange (ETDEWEB)

Strugar, P; Raisic, N; Obradovic, D; Jovanovic, S [Institute of Nuclear Sciences Boris Kidric, Vinca, Beograd (Serbia and Montenegro)

1965-05-01

A series of critical experiments were performed on the RB reactor in order to determine the thermal neutron flux increase in the central horizontal reflector formed by a split reactor core. The objectives of these experiments were to study the possibilities of improving the thermal neutron flux characteristics of the neutron beam in the horizontal beam tube of the RA research reactor. The construction of RA reactor enables to split the core in two, to form a central horizontal reflector in front of the beam tube. This is achieved by replacing 2% enriched uranium slugs in the fuel channel by dummy aluminium slugs. The purpose of the first series of experiments was to study the gain in thermal neutron component inside the horizontal reflector and the loss of reactivity as a function of the lattice pitch and central reflector thickness.
Hydrogen production by water-splitting using heat supplied by a high-temperature reactor

International Nuclear Information System (INIS)

Courvoisier, P.; Rastoin, J.; Titiliette, Z.

1976-01-01

Some aspects of the use of heat of nuclear origin for the production of hydrogen by water-splitting are considered. General notions pertaining to the yield of chemical cycles are discussed and the heat balance corresponding to two specific processes is evaluated. The possibilities of high temperature reactors, with respect to the coolant temperature levels, are examined from the standpoint of core design and technology of some components. Furthermore, subject to a judicious selection of their characteristics, these reactors can lead to excellent use of nuclear fuel. The coupling of the nuclear reactor with the chemical plant by means of a secondary helium circuit gives rise to the design of an intermediate heat exchanger, which is an important component of the overall installation. (orig.) [de
Mutation Rates of STR Systems in Danes

DEFF Research Database (Denmark)

Andersen, Kim Emil; Bøttcher, Susanne Gammelgaard; Christensen, Susanne

Danish paternity cases in the period 1999 to 2005 were investigated regarding mutation rates in STR loci. STR-typing was performed by the Applied Biosystems AmplfStr Profiler Plus kit in the period 1999 to early 2005, hereafter named the PP9, and by Applied Biosystems AmplfStr Identifier kit for ...... and kits. Sex and STR locus specific mutation rates were estimated with 95% confidence limits by the method of Clopper and Pearson (1934)....
Denitrification performance of Pseudomonas denitrificans in a fluidized-bed biofilm reactor and in a stirred tank reactor

Energy Technology Data Exchange (ETDEWEB)

Cattaneo, C.; Nicolella, C.; Rovatti, M. [Department of Chemical and Process Engineering, Faculty of Engineering, University of Genoa, Via Opera Pia 15, 16145 Genoa (Italy)

2003-04-09

Denitrification of a synthetic wastewater containing nitrates and methanol as carbon source was carried out in two systems - a fluidized-bed biofilm reactor (FBBR) and a stirred tank reactor (STR) - using Pseudomonas denitrificans over a period of five months. Nitrogen loading was varied during operation of both reactors to assess differences in the response to transient conditions. Experimental data were analyzed to obtain a comparison of denitrification kinetics in biofilm and suspended growth reactors. The comparison showed that the volumetric degradation capacity in the FBBR (5.36 kg {sub N} . m{sup -3} . d{sup -1}) was higher than in the STR, due to higher biomass concentration (10 kg {sub BM} . m{sup -3} vs 1.2 kg {sub BM} m{sup -3}). (Abstract Copyright [2003], Wiley Periodicals, Inc.)
Current STR-based techniques in forensic science

Directory of Open Access Journals (Sweden)

Phuvadol Thanakiatkrai

2013-01-01

Full Text Available DNA analysis in forensic science is mainly based on short tandem repeat (STR genotyping. The conventional analysis is a three-step process of DNA extraction, amplification and detection. An overview of various techniques that are currently in use and are being actively researched for STR typing is presented. The techniques are separated into STR amplification and detection. New techniques for forensic STR analysis focus on increasing sensitivity, resolution and discrimination power for suboptimal samples. These are achieved by shifting primer-binding sites, using high-fidelity and tolerant polymerases and applying novel methods to STR detection. Examples in which STRs are used in criminal investigations are provided and future research directions are discussed.
Identification of variant alleles at AmpFlSTR SGM Plus STR loci in a ...

African Journals Online (AJOL)

STORAGESEVER

2008-10-20

Oct 20, 2008 ... origin. It is therefore important that forensic science community shares information on the occurrence of these variants and reduces complications during STR typing. In this study, we report 5 variant alleles at AmpFlSTR SGM. Plus loci in a sample population of Bangladesh. MATERIALS AND METHODS.
Exergy analysis of a system using a chemical heat pump to link a supercritical water-cooled nuclear reactor and a thermochemical water splitting cycle

International Nuclear Information System (INIS)

Granovskii, M.; Dincer, I.; Rosen, M. A.; Pioro, I

2007-01-01

The power generation efficiency of nuclear plants is mainly determined by the permissible temperatures and pressures of the nuclear reactor fuel and coolants. These parameters are limited by materials properties and corrosion rates and their effect on nuclear reactor safety. The advanced materials for the next generation of CANDU reactors, which employ steam as a coolant and heat carrier, permit the increased steam parameters (outlet temperature up to 625 degree C and pressure of about 25 MPa). Supercritical water-cooled (SCW) nuclear power plants are expected to increase the power generation efficiency from 35 to 45%. Supercritical water-cooled nuclear reactors can be linked to thermochemical water splitting cycles for hydrogen production. An increased steam temperature from the nuclear reactor makes it also possible to utilize its energy in thermochemical water splitting cycles. These cycles are considered by many as one of the most efficient ways to produce hydrogen from water and to have advantages over traditional low-temperature water electrolysis. However, even lower temperature water splitting cycles (Cu-Cl, UT-3, etc.) require a heat supply at the temperatures over 550-600 degree C. A sufficient increase in the heat transfer from the nuclear reactor to a thermochemical water splitting cycle, without jeopardizing nuclear reactor safety, might be effectively achieved by application of a heat pump which increases the temperature the heat supplied by virtue of a cyclic process driven by mechanical or electrical work. A high temperature chemical heat pump which employs the reversible catalytic methane conversion reaction is proposed. The reaction shift from exothermic to endothermic and back is achieved by a change of the steam concentration in the reaction mixture. This heat pump, coupled with a SCW nuclear plant on one side and thermochemical water splitting cycle on the other, increases the temperature level of the 'nuclear' heat and, thus, the intensity of
Zn(II Removal from Wastewater by Electrocoagulation/Flotation Method using New Configuration of a Split-Plate Airlift Electrochemical Reactor

Directory of Open Access Journals (Sweden)

Saad H. Ammar

2018-01-01

Full Text Available In this paper, split-plate airlift electrochemical reactor as an apparatus with new configuration for wastewater treatment was provided. Two aluminum plates were fixed inside the reactor and present two functions; first it works as split plates for internal loop generation of the airlift system (the zone between the two plates acts as riser while the other two zones act as downcomer and second it works as two electrodes for electrocoagulation process. Simulated wastewater contaminated with zinc ions was used to test the performance of this apparatus for zinc removal by studying the effect of different experimental variables such as initial concentration of zinc (50-800 ppm, electrical current density (2.67-21.4 mA/cm2, initial pH (3-11, air flowrate (12-50 LPH, and implicitly the electrocoagulation time. The results have shown the applicability of this split-plate airlift reactor as electrocoagulation cell in the treatment of wastewater such as wastewater containing Zink ions. The Zink removal percent was shown to increase upon increasing the current density and the electrolysis time. Also best removal percent was achieved in the initial pH range between 7 and 9. The minimum electrocoagulation time required for removal of ≥ 90% of Zn(II decreases from 90 to 22 min when operating current density increases from 2.67 to 21.4 mA/cm2.
Analysis of the 19 Y-STR and 16 X-STR loci system in the Han population of Shandong province, China.

Science.gov (United States)

Gao, H M; Wang, C; Han, S Y; Sun, S H; Xiao, D J; Wang, Y S; Li, C T; Zhang, M X

2017-03-30

The sex-linked short tandem repeats (STR), Y-STR and X-STR, are important for autosomal STRs in forensic paternity testing. We evaluated the forensic parameters of 19 Y-STRs and 16 X-STRs in the Han population of Shandong province, China. A Goldeneye 20Y kit (DYS391, DYS389I, DYS390, DYS389II, DYS348, DYS456, Y-GATA-H4, DYS447, DYS19, DYS392, DYS393, DYS388, DYS439, DYS635, DYS448, DYS460, DYS458, DYS437, DYS385 a/b) was used to analyze the forensic parameters of 534 unrelated males. A Goldeneye17X system (DXS6795, DXS9902, DXS8378, HPRTB, GATA165B12, DXS7132, DXS7424, DXS6807, DXS6803, GATA172D05, DXS6800, DXS10134, GATA31E08, DXS10159, DXS6789, DXS6810, amelogenin) was used to analyze 97 unrelated males and 214 females. In addition, we used the kits to examine 5 cases with abnormal amelogenin test results, as well as a male child with agenosomia typed by autosomal STR. We found 203 Y-STR haplotypes with allele frequencies ranging from 0.0019 to 0.7959, and GD ranging from 0.3429 to 0.9667. Expect in DXS6803, the allele frequencies of the other 15 X-STR loci showed no differences between females and males. PD F ranged from 0.5504 to 0.9638, while PD M ranged from 0.3176 to 0.8377. With the exception of DXS6803 and DXS6810, the allele frequencies of other X-STR loci were in accordance with Hardy-Weinberg equilibrium in females. One amelogenin negative case was characterized as a deletion of Y-DYS458. This paper provided data regarding the genetic polymorphism of Y-STRs and X-STRs in the Han population, and demonstrated the importance of Y-STR and X-STR in forensic autosomal STR analysis.
Thermodynamic analysis of the use a chemical heat pump to link a supercritical water-cooled nuclear reactor and a thermochemical water-splitting cycle for hydrogen production

International Nuclear Information System (INIS)

Granovskii, Mikhail; Dincer, Ibrahim; Rosen, Marc A.; Pioro, Igor

2008-01-01

Increases in the power generation efficiency of nuclear power plants (NPPs) are mainly limited by the permissible temperatures in nuclear reactors and the corresponding temperatures and pressures of the coolants in reactors. Coolant parameters are limited by the corrosion rates of materials and nuclear-reactor safety constraints. The advanced construction materials for the next generation of CANDU reactors, which employ supercritical water (SCW) as a coolant and heat carrier, permit improved 'steam' parameters (outlet temperatures up to 625degC and pressures of about 25 MPa). An increase in the temperature of steam allows it to be utilized in thermochemical water splitting cycles to produce hydrogen. These methods are considered by many to be among the most efficient ways to produce hydrogen from water and to have advantages over traditional low-temperature water electrolysis. However, even lower temperature water splitting cycles (Cu-Cl, UT-3, etc.) require an intensive heat supply at temperatures higher than 550-600degC. A sufficient increase in the heat transfer from the nuclear reactor to a thermochemical water splitting cycle, without jeopardizing nuclear reactor safety, might be effectively achieved by application of a heat pump, which increases the temperature of the heat supplied by virtue of a cyclic process driven by mechanical or electrical work. Here, a high-temperature chemical heat pump, which employs the reversible catalytic methane conversion reaction, is proposed. The reaction shift from exothermic to endothermic and back is achieved by a change of the steam concentration in the reaction mixture. This heat pump, coupled with the second steam cycle of a SCW nuclear power generation plant on one side and a thermochemical water splitting cycle on the other, increases the temperature of the 'nuclear' heat and, consequently, the intensity of heat transfer into the water splitting cycle. A comparative preliminary thermodynamic analysis is conducted of
Hydrogen production system based on high temperature gas cooled reactor energy using the sulfur-iodine (SI) thermochemical water splitting cycle

International Nuclear Information System (INIS)

Garcia, L.; Gonzalez, D.

2011-01-01

Hydrogen production from water using nuclear energy offers one of the most attractive zero-emission energy strategies and the only one that is practical on a substantial scale. Recently, strong interest is seen in hydrogen production using heat of a high-temperature gas-cooled reactor. The high-temperature characteristics of the modular helium reactor (MHR) make it a strong candidate for producing hydrogen using thermochemical or high-temperature electrolysis (HTE) processes. Eventually it could be also employ a high-temperature gas-cooled reactor (HTGR), which is particularly attractive because it has unique capability, among potential future generation nuclear power options, to produce high-temperature heat ideally suited for nuclear-heated hydrogen production. Using heat from nuclear reactors to drive a sulfur-iodine (SI) thermochemical hydrogen production process has been interest of many laboratories in the world. One of the promising approaches to produce large quantity of hydrogen in an efficient way using the nuclear energy is the sulfur-iodine (SI) thermochemical water splitting cycle. Among the thermochemical cycles, the sulfur iodine process remains a very promising solution in matter of efficiency and cost. This work provides a pre-conceptual design description of a SI-Based H2-Nuclear Reactor plant. Software based on chemical process simulation (CPS) was used to simulate the thermochemical water splitting cycle Sulfur-Iodine for hydrogen production. (Author)
Using probabilistic theory to develop interpretation guidelines for Y-STR profiles.

Science.gov (United States)

Taylor, Duncan; Bright, Jo-Anne; Buckleton, John

2016-03-01

Y-STR profiling makes up a small but important proportion of forensic DNA casework. Often Y-STR profiles are used when autosomal profiling has failed to yield an informative result. Consequently Y-STR profiles are often from the most challenging samples. In addition to these points, Y-STR loci are linked, meaning that evaluation of haplotype probabilities are either based on overly simplified counting methods or computationally costly genetic models, neither of which extend well to the evaluation of mixed Y-STR data. For all of these reasons Y-STR data analysis has not seen the same advances as autosomal STR data. We present here a probabilistic model for the interpretation of Y-STR data. Due to the fact that probabilistic systems for Y-STR data are still some way from reaching active casework, we also describe how data can be analysed in a continuous way to generate interpretational thresholds and guidelines. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
A comparison of mass transfer coefficients between trickle-bed, hollow fiber membrane and stirred tank reactors.

Science.gov (United States)

Orgill, James J; Atiyeh, Hasan K; Devarapalli, Mamatha; Phillips, John R; Lewis, Randy S; Huhnke, Raymond L

2013-04-01

Trickle-bed reactor (TBR), hollow fiber membrane reactor (HFR) and stirred tank reactor (STR) can be used in fermentation of sparingly soluble gasses such as CO and H2 to produce biofuels and bio-based chemicals. Gas fermenting reactors must provide high mass transfer capabilities that match the kinetic requirements of the microorganisms used. The present study compared the volumetric mass transfer coefficient (K(tot)A/V(L)) of three reactor types; the TBR with 3 mm and 6 mm beads, five different modules of HFRs, and the STR. The analysis was performed using O2 as the gaseous mass transfer agent. The non-porous polydimethylsiloxane (PDMS) HFR provided the highest K(tot)A/V(L) (1062 h(-1)), followed by the TBR with 6mm beads (421 h(-1)), and then the STR (114 h(-1)). The mass transfer characteristics in each reactor were affected by agitation speed, and gas and liquid flow rates. Furthermore, issues regarding the comparison of mass transfer coefficients are discussed. Copyright © 2013 Elsevier Ltd. All rights reserved.
Introduction of the Python script STRinNGS for analysis of STR regions in FASTQ or BAM files and expansion of the Danish STR sequence database to 11 STRs

DEFF Research Database (Denmark)

Friis, Susanne L; Buchard, Anders; Rockenbauer, Eszter

2016-01-01

This work introduces the in-house developed Python application STRinNGS for analysis of STR sequence elements in BAM or FASTQ files. STRinNGS identifies sequence reads with STR loci by their flanking sequences, it analyses the STR sequence and the flanking regions, and generates a report with the......This work introduces the in-house developed Python application STRinNGS for analysis of STR sequence elements in BAM or FASTQ files. STRinNGS identifies sequence reads with STR loci by their flanking sequences, it analyses the STR sequence and the flanking regions, and generates a report...
Cultivation of shear stress sensitive microorganisms in disposable bag reactor systems.

Science.gov (United States)

Jonczyk, Patrick; Takenberg, Meike; Hartwig, Steffen; Beutel, Sascha; Berger, Ralf G; Scheper, Thomas

2013-09-20

Technical scale (≥5l) cultivations of shear stress sensitive microorganisms are often difficult to perform, as common bioreactors are usually designed to maximize the oxygen input into the culture medium. This is achieved by mechanical stirrers, causing high shear stress. Examples for shear stress sensitive microorganisms, for which no specific cultivation systems exist, are many anaerobic bacteria and fungi, such as basidiomycetes. In this work a disposable bag bioreactor developed for cultivation of mammalian cells was investigated to evaluate its potential to cultivate shear stress sensitive anaerobic Eubacterium ramulus and shear stress sensitive basidiomycetes Flammulina velutipes and Pleurotus sapidus. All cultivations were compared with conventional stainless steel stirred tank reactors (STR) cultivations. Good growth of all investigated microorganisms cultivated in the bag reactor was found. E. ramulus showed growth rates of μ=0.56 h⁻¹ (bag) and μ=0.53 h⁻¹ (STR). Differences concerning morphology, enzymatic activities and growth in fungal cultivations were observed. In the bag reactor growth in form of small, independent pellets was observed while STR cultivations showed intense aggregation. F. velutipes reached higher biomass concentrations (21.2 g l⁻¹ DCW vs. 16.8 g l⁻¹ DCW) and up to 2-fold higher peptidolytic activities in comparison to cell cultivation in stirred tank reactors. Copyright © 2013 Elsevier B.V. All rights reserved.
Z3str3: A String Solver with Theory-aware Branching

OpenAIRE

Berzish, Murphy; Zheng, Yunhui; Ganesh, Vijay

2017-01-01

We present a new string SMT solver, Z3str3, that is faster than its competitors Z3str2, Norn, CVC4, S3, and S3P over a majority of three industrial-strength benchmarks, namely Kaluza, PISA, and IBM AppScan. Z3str3 supports string equations, linear arithmetic over length function, and regular language membership predicate. The key algorithmic innovation behind the efficiency of Z3str3 is a technique we call theory-aware branching, wherein we modify Z3's branching heuristic to take into account...

Defluoridation of drinking water by electrocoagulation/electroflotation in a stirred tank reactor with a comparative performance to an external-loop airlift reactor

International Nuclear Information System (INIS)

Essadki, A.H.; Gourich, B.; Vial, Ch.; Delmas, H.; Bennajah, M.

2009-01-01

Defluoridation using batch electrocoagulation/electroflotation (EC/EF) was carried out in two reactors for comparison purpose: a stirred tank reactor (STR) close to a conventional EC cell and an external-loop airlift reactor (ELAR) that was recently described as an innovative reactor for EC. The respective influences of current density, initial concentration and initial pH on the efficiency of defluoridation were investigated. The same trends were observed in both reactors, but the efficiency was higher in the STR at the beginning of the electrolysis, whereas similar values were usually achieved after 15 min operation. The influence of the initial pH was explained using the analyses of sludge composition and residual soluble aluminum species in the effluents, and it was related to the prevailing mechanisms of defluoridation. Fluoride removal and sludge reduction were both favored by an initial pH around 4, but this value required an additional pre-treatment for pH adjustment. Finally, electric energy consumption was similar in both reactors when current density was lower than 12 mA/cm 2 , but mixing and complete flotation of the pollutants were achieved without additional mechanical power in the ELAR, using only the overall liquid recirculation induced by H 2 microbubbles generated by water electrolysis, which makes subsequent treatments easier to carry out.
A massively parallel strategy for STR marker development, capture, and genotyping.

Science.gov (United States)

Kistler, Logan; Johnson, Stephen M; Irwin, Mitchell T; Louis, Edward E; Ratan, Aakrosh; Perry, George H

2017-09-06

Short tandem repeat (STR) variants are highly polymorphic markers that facilitate powerful population genetic analyses. STRs are especially valuable in conservation and ecological genetic research, yielding detailed information on population structure and short-term demographic fluctuations. Massively parallel sequencing has not previously been leveraged for scalable, efficient STR recovery. Here, we present a pipeline for developing STR markers directly from high-throughput shotgun sequencing data without a reference genome, and an approach for highly parallel target STR recovery. We employed our approach to capture a panel of 5000 STRs from a test group of diademed sifakas (Propithecus diadema, n = 3), endangered Malagasy rainforest lemurs, and we report extremely efficient recovery of targeted loci-97.3-99.6% of STRs characterized with ≥10x non-redundant sequence coverage. We then tested our STR capture strategy on P. diadema fecal DNA, and report robust initial results and suggestions for future implementations. In addition to STR targets, this approach also generates large, genome-wide single nucleotide polymorphism (SNP) panels from flanking regions. Our method provides a cost-effective and scalable solution for rapid recovery of large STR and SNP datasets in any species without needing a reference genome, and can be used even with suboptimal DNA more easily acquired in conservation and ecological studies. Published by Oxford University Press on behalf of Nucleic Acids Research 2017.
Strömende Flüssigkeiten und Gase

Science.gov (United States)

Heintze, Joachim

Die Bemerkung über die Probleme eines allgemeingültigen Ansatzes, die wir zu Anfang von Kap. 1 machten, gilt in noch höherem Maße für die Mechanik von strömenden Flüssigkeiten; dort erreicht man sogar ziemlich rasch die Grenze der Leistungsfähigkeit der heutigen Mathematik, d. h. wir können zwar - ausgehend von den Newtonschen Gesetzen (Bd. I/3) - eine Differentialgleichung für die Strömung von Flüssigkeiten aufstellen, die sog. Navier-Stokes-Gleichung, es sind aber keine allgemein anwendbaren Lösungsverfahren für diese Gleichung bekannt. Ein Blick in die Natur und auf die vielfältigen Strömungsphänomene zeigt, dass diese Tatsache nicht verwunderlich ist.
Y chromosome STR typing in crime casework.

Science.gov (United States)

Roewer, Lutz

2009-01-01

Since the beginning of the nineties the field of forensic Y chromosome analysis has been successfully developed to become commonplace in laboratories working in crime casework all over the world. The ability to identify male-specific DNA renders highly variable Y-chromosomal polymorphisms, the STR sequences, an invaluable addition to the standard panel of autosomal loci used in forensic genetics. The male-specificity makes the Y chromosome especially useful in cases of male/female cell admixture, namely in sexual assault cases. On the other hand, the haploidy and patrilineal inheritance complicates the interpretation of a Y-STR match, because male relatives share for several generations an identical Y-STR profile. Since paternal relatives tend to live in the geographic and cultural territory of their ancestors, the Y chromosome analysis has a potential to make inferences on the population of origin of a given DNA profile. This review addresses the fields of application of Y chromosome haplotyping, the interpretation of results, databasing efforts and population genetics aspects.
Analysis of matches and partial-matches in a Danish STR data set

DEFF Research Database (Denmark)

Tvedebrink, Torben; Eriksen, Poul Svante; Curan, James Michael

2012-01-01

Over the recent years, the national databases of STR profiles have grown in size due to the success of forensic DNA analysis in solving crimes. The accumulation of DNA profiles implies that the probability of a random match or near match of two randomly selected DNA profiles in the database...... increases. We analysed 53,295 STR profiles from individuals investigated in relation to crime case investigations at the Department of Forensic Medicine, Faculty of Health Sciences, University of Copenhagen, Denmark. Incomplete STR profiles (437 circa 0.8% of the total), 48 redundant STR profiles from...
A Y-chromosome STR marker should be added to commercial multiplex STR kits.

Science.gov (United States)

Oz, Carla; Zaken, Neomi; Amiel, Merav; Zamir, Ashira

2008-07-01

Autosomal short tandem repeat (STR) analysis has become highly relevant in the identification of victims from mass disasters and terrorist attacks. In such events, gender misidentification can be of grave consequences, yet the list reporting amelogenin amplification failure using STR multiplex kits continues to grow. Presented here are three such examples. In the first case, we present two male suspects who demonstrated amelogenin Y-deficient results using two commercial kit procedures. The presence of their Y chromosomes was proven by obtaining a Y-haplotype. The second case demonstrated a profile from a third male suspect where only the Y homolog of the XY pair was amplified. In events such as mass disasters or terrorist attacks, timely and reliable high throughput DNA typing results are essential. As the number of reported cases of amplification failure at the amelogenin gene continues to grow, we suggest that the incorporation of a better gender identification tool in commercial kits is crucial.
Verification of split spectrum technique for ultrasonic inspection of welded structures in nuclear reactors

International Nuclear Information System (INIS)

Ericsson, L.; Stepinski, T.

1992-01-01

Ultrasonic nondestructive inspection of materials is often limited by the presence of backscattered echoes from the material structure. A digital signal processing technique for removal of this material noise, referred to as split spectrum processing (SSP), has been developed and verified using simple laboratory experiments during the last decade. However, application of the split spectrum processing algorithm to industrial conditions has been rarely reported. In the paper the results of the practical evaluation of the SSP technique are presented. A number of different ultrasonic transducers were used for acquiring echoes from artificial flaws as well as natural cracks. The flaws were located in test blocks employed by the Swedish Nuclear Power Companies as reference during ultrasonic inspection of nuclear reactor vessels. The acquired ultrasonic A-scan signals were processed off-line using specially developed algorithms on a personal computer (PC). The experiments show evidence that properly tuned SSP algorithms result in a considerable improvement of the signal to material noise ratio. The enhancements were similar irrespective of the features of the transducer used or the nature of the inspected flaw. The problems related to the development of self-tuning SSP algorithms for on-line processing of B-scans are discussed. (author)
Correlation and flux tilt measurements of coupled-core reactor assemblies

International Nuclear Information System (INIS)

Harries, J.R.

1976-01-01

The systematics of coupling reactivity and time delay between cores have been investigated with a series of coupled-core assemblies on the AAEC Split-table Critical Facility. The assemblies were similar to the Universities' Training Reactor (UTR), but had graphite coupling region thickness of 450 mm, 600 mm and 800 mm. The coupling reactivity measured by both the cross-correlation of reactor noise and the flux tilt methods was stronger than for the UTRs, but showed a similar trend with core spacing. The cross-correlograms were analysed using the two-node model to derive the time delays between the cores. The time delays were compared with thermal neutron wave propagation, and found to be consistent when the time delays were added to the individual node response-function delays. (author)
Test reactors in the world

International Nuclear Information System (INIS)

Corella, M.R.; Gomez Alonso, M.

1983-01-01

INFCE work on research reactor core conversion from HEU to LEU, attracted a raising interest on this type of nuclear reactors. In this context, the present work shows a compilation of worldwide research and test nuclear reactors, now in operation, under construction, or planned, as well as decommissioned reactors (tables A to F). Brief descriptions of these reactors are included in tables G to L. In table M a summary view of reactors with power level between 10 and 30 MWt is shown. Attention is focused on that power range, as it has been considered in very preliminar studies for a new research reactor. Almost all data have been obtained from current available bibliography. (author)
A case of false mother included with 46 autosomal STR markers.

Science.gov (United States)

Li, Li; Lin, Yuan; Liu, Yan; Zhu, Ruxin; Zhao, Zhenmin; Que, Tingzhi

2015-01-01

For solving a maternity case, 19 autosomal short tandem repeats (STRs) were amplified using the AmpFℓSTR(®) Sinofiler(TM) kit and PowerPlex(®) 16 System. Additional 27 autosomal STR loci were analyzed using two domestic kits AGCU 21+1 and STRtyper-10G. The combined maternity index (CMI) was calculated to be 3.3 × 10(13), but the putative mother denied that she had given birth to the child. In order to reach an accurate conclusion, further testing of 20 X-chromosomal short tandem repeats (X-STRs), 40 single nucleotide polymorphism (SNP) loci, and mitochondrial DNA (mtDNA) was carried out. The putative mother and the boy shared at least one allele at all 46 tested autosomal STR loci. But, according to the profile data of 20 X-STR and 40 SNP markers, different genotypes at 13 X-STR loci and five SNP loci excluded maternity. Mitochondrial profiles also clearly excluded the mother as a parent of the son because they have multiple differences. It was finally found that the putative mother is the sister of the biological father. Different kinds of genetic markers needfully supplement the use of autosomal STR loci in case where the putative parent is suspected to be related to the true parent.
Defluoridation of drinking water by electrocoagulation/electroflotation in a stirred tank reactor with a comparative performance to an external-loop airlift reactor

Energy Technology Data Exchange (ETDEWEB)

Essadki, A.H., E-mail: essadki@hotmail.com [Ecole Superieure de Technologie de Casablanca, BP 8012, Oasis, Casablanca (Morocco); Gourich, B. [Ecole Superieure de Technologie de Casablanca, BP 8012, Oasis, Casablanca (Morocco); Vial, Ch. [Laboratoire de Genie Chimique et Biochimique, LGCB-UBP/ENSCCF, 24 avenue des Landais, BP 206, 63174 Aubiere Cedex (France); Delmas, H. [Laboratoire de Genie Chimique, ENSIACET-INPT, 5 rue Paulin Talabot, 31106 Toulouse (France); Bennajah, M. [Ecole Superieure de Technologie de Casablanca, BP 8012, Oasis, Casablanca (Morocco); Laboratoire de Genie Chimique, ENSIACET-INPT, 5 rue Paulin Talabot, 31106 Toulouse (France)

2009-09-15

Defluoridation using batch electrocoagulation/electroflotation (EC/EF) was carried out in two reactors for comparison purpose: a stirred tank reactor (STR) close to a conventional EC cell and an external-loop airlift reactor (ELAR) that was recently described as an innovative reactor for EC. The respective influences of current density, initial concentration and initial pH on the efficiency of defluoridation were investigated. The same trends were observed in both reactors, but the efficiency was higher in the STR at the beginning of the electrolysis, whereas similar values were usually achieved after 15 min operation. The influence of the initial pH was explained using the analyses of sludge composition and residual soluble aluminum species in the effluents, and it was related to the prevailing mechanisms of defluoridation. Fluoride removal and sludge reduction were both favored by an initial pH around 4, but this value required an additional pre-treatment for pH adjustment. Finally, electric energy consumption was similar in both reactors when current density was lower than 12 mA/cm{sup 2}, but mixing and complete flotation of the pollutants were achieved without additional mechanical power in the ELAR, using only the overall liquid recirculation induced by H{sub 2} microbubbles generated by water electrolysis, which makes subsequent treatments easier to carry out.
Variation of autosomes and X chromosome STR in breast cancer and gynecological cancer tissues

Directory of Open Access Journals (Sweden)

Hou Youxiang

2017-04-01

Full Text Available This study analyses 1000 cases of patients with breast cancer and 2000 cases of patients with gynecological cancer (1000 cases of malignant tumor, 1000 cases of benign tumors, where breast cancer and malignant tumor patients comprise the observation group, while patients with benign tumors comprise the control group. Through DNA extraction, STR genotyping and variation verification, microdissection, individual STR mutation rate and loci STR mutation rate of the two groups of patients were calculated. Results show that there are no significant (P > 0.05 differences in the STR variation of autosomes and X chromosome between patients in the observation group and those in the reference group. However, significant (P < 0.05 intergroup differences were found for STR variation typing between patients with malignant and benign tumors. Using STR genotyping for autosomes and X chromosomes, gynecological cancer patients were found to be more likely to mutate, with a clear relationship between STR variation and tumor differentiation degrees. The study on the variation analysis of autosomes and X chromosome STR in breast and gynecological cancer tissues is expected to have a high application value when applied to medical research and identification processes.
Måling på ikke sinusformede AC strømme og spændinger

DEFF Research Database (Denmark)

Nielsen, Arne Hejde

1998-01-01

Målinger på en- og trefasede spændinger og strømme i elforsyningen. Specielt gennemgås forholdene ved ikke symetriske systemer med overtoner i spændinger og strømme.......Målinger på en- og trefasede spændinger og strømme i elforsyningen. Specielt gennemgås forholdene ved ikke symetriske systemer med overtoner i spændinger og strømme....
Davis Strædet

DEFF Research Database (Denmark)

Råstofdirektoratet planlægger at udbyde flere licensområder med henblik på efterforskning og udvinding af olie og gas i den grønlandske del af Davis Stræde. Som en del af beslutningsgrundlaget har Råstofdirektoratet bedt DCE – Nationalt Center for Miljø og Energi og Grønlands Naturinstitut om at ...
Bengt Strömgren: Growing up with astronomy, 1908-1932

DEFF Research Database (Denmark)

Rebsdorf, S.O.

2003-01-01

Bengt Strömgren's (1908-1987) early career is examined down to 1932, the year of his first landmark article on astrophysics, in which, continuing the numerical tradition at the Copenhagen Observatory, Strömgren applied the still novel quantum mechanics with great faith in its validity. In additio...
Grasshoppers (Orthoptera: Caelifera and crickets (Orthoptera: Ensifera from slopes of Macošská stráň and Vilémovická stráň (Moravský kras Protected landscape area, Czech Republic

Directory of Open Access Journals (Sweden)

Jana Niedobová

2011-01-01

Full Text Available In 2008 we found 21 species of grasshoppers and crickets on Macošská stráň slope and 18 species on Vilémovická stráň slope. Both slopes are located in the northern part of the Moravský kras Protected landscape area and have xerothermic character. Both slopes are influenced by pasture management. For the most comprehensive picture of Orthoptera we used a standard method (sweeping of vegetation and nonstandard methods (pitfall traps and Möricke yellow cups. Termophilous species of Orthoptera on Macošská stráň (47% were dominating. On Vilémovická stráň mezophilous species (46% were dominating. The most common species were Stenobothrus lineatus (Panzer, 1796 on Macošská stráň slope and Chorthippus parallelus (Zetterstedt, 1821, Stenobothrus lineatus, Chorthippus bigutulus (Linné, 1758 and Chorthippus dorsatus (Zetterstedt, 1821 on Vilémovická stráň slope. Rare species of this assemblage were Stenobothrus nigromaculatus (Herrich-Schaffer, 1840 which was on Macošská stráň slope only and Tetrix bipunctata (Linnaeus, 1758 which has much bigger abundances also on Macošská stráň slope.
Allele frequency distribution for 21 autosomal STR loci in Bhutan.

Science.gov (United States)

Kraaijenbrink, Thirsa; van Driem, George L; Tshering of Gaselô, Karma; de Knijff, Peter

2007-07-20

We studied the allele frequency distribution of 21 autosomal STR loci contained in the AmpFlSTR Identifiler (Applied Biosystems), the Powerplex 16 (Promega) and the FFFL (Promega) multiplex PCR kits among 936 individuals from the Royal Kingdom of Bhutan. As such these are the first published autosomal DNA results from this country.
Suppression of the water splitting back reaction on GaN:ZnO photocatalysts loaded with core/shell cocatalysts, investigated using a μ-reactor

DEFF Research Database (Denmark)

Dionigi, Fabio; Vesborg, Peter Christian Kjærgaard; Pedersen, Thomas

2012-01-01

Using silicon-based l-reactors, we have studied the photocatalytic water splitting reaction and the catalytic back reaction on the same catalysts. GaN:ZnO without cocatalyst and loaded with Rh, Pt, Cr2O3/Rh, Cr2O3/Pt, and Rh–Cr mixed oxide has been tested for gas-phase photocatalytic water splitt...
Power reactors in Member States. 1979 edition

International Nuclear Information System (INIS)

1979-01-01

This is the fifth issue of a periodic computer-based listing of nuclear power reactors, presenting the situation as of 1 May 1979. The basic design data for all reactors in operation, under construction, planned and shut down have been included. The following two tables are included to give a general picture of the overall situation: Table I: Reactor types and net electrical power. Table II: Reactor units and net electrical powered by country cummulated by year
Grå strækninger på det overordnede vejnet i det åbne land

DEFF Research Database (Denmark)

Sørensen, Michael

2006-01-01

udviklet konkrete metoder til udpegning, analyse og udbedring af grå strækninger. I ph.d.-afhandlingen “Grå strækninger i det åbne land – Udvikling, anvendelse og vurdering af alvorlighedsbaseret metode til udpegning, analyse og udbedring af grå strækninger” er der derfor blevet formuleres en overordnet...... filosofi for det grå strækningsarbejde samtidig med, at der med fokus på udpegning udvikles metoder til udpegning, analyse og udbedring af grå strækninger på det overordnede vejnet i det åbne land. Formålet har specifikt været at udvikle metoder, som er både uheldsteoretisk velfunderede og anvendelige i...

Nuclear research reactors

International Nuclear Information System (INIS)

1985-01-01

It's presented data about nuclear research reactors in the world, retrieved from the Sien (Nuclear and Energetic Information System) data bank. The information are organized in table forms as follows: research reactors by countries; research reactors by type; research reactors by fuel and research reactors by purpose. (E.G.) [pt
Pilot study for early prognosis of Azoospermia in relation to Y-STR Profiling

Directory of Open Access Journals (Sweden)

Ahmed M. Refaat

2016-01-01

Conclusion: There was a significant correlation of Y-STR Profiling results and the prevalence of Azoospermia condition, which supports the idea of using Y-STR Profiling in early prognosis of Azoospermia.
Fluorescence-based thermal shift data on multidrug regulator AcrR from Salmonella enterica subsp. entrica serovar Typhimurium str. LT2.

Science.gov (United States)

Manjasetty, Babu A; Halavaty, Andrei S; Luan, Chi-Hao; Osipiuk, Jerzy; Mulligan, Rory; Kwon, Keehwan; Anderson, Wayne F; Joachimiak, Andrzej

2016-06-01

The fluorescence-based thermal shift (FTS) data presented here include Table S1 and Fig. S1, and are supplemental to our original research article describing detailed structural, FTS, and fluorescence polarization analyses of the Salmonella enterica subsp. entrica serovar Typhimurium str. LT2 multidrug transcriptional regulator AcrR (StAcrR) (doi:10.1016/j.jsb.2016.01.008) (Manjasetty et al., 2015 [1]). Table S1 contains chemical formulas, a Chemical Abstracts Service (CAS) Registry Number (CAS no.), FTS rank (a ligand with the highest rank) has the largest difference in the melting temperature (ΔT m), and uses as drug molecules against various pathological conditions of sixteen small-molecule ligands that increase thermal stability of StAcrR. Thermal stability of human enolase 1, a negative control protein, was not affected in the presence of various concentrations of the top six StAcrR binders (Fig. S1).
Determining Y-STR mutation rates in deep-routing genealogies: Identification of haplogroup differences.

Science.gov (United States)

Claerhout, Sofie; Vandenbosch, Michiel; Nivelle, Kelly; Gruyters, Leen; Peeters, Anke; Larmuseau, Maarten H D; Decorte, Ronny

2018-05-01

Knowledge of Y-chromosomal short tandem repeat (Y-STR) mutation rates is essential to determine the most recent common ancestor (MRCA) in familial searching or genealogy research. Up to now, locus-specific mutation rates have been extensively examined especially for commercially available forensic Y-STRs, while haplogroup specific mutation rates have not yet been investigated in detail. Through 450 patrilineally related namesakes distributed over 212 deep-rooting genealogies, the individual mutation rates of 42 Y-STR loci were determined, including 27 forensic Y-STR loci from the Yfiler ® Plus kit and 15 additional Y-STR loci (DYS388, DYS426, DYS442, DYS447, DYS454, DYS455, DYS459a/b, DYS549, DYS607, DYS643, DYS724a/b and YCAIIa/b). At least 726 mutations were observed over 148,596 meiosis and individual Y-STR mutation rates varied from 2.83 × 10 -4 to 1.86 × 10 -2 . The mutation rate was significantly correlated with the average allele size, the complexity of the repeat motif sequence and the age of the father. Significant differences in average Y-STR mutations rates were observed when haplogroup 'I & J' (4.03 × 10 -3 mutations/generation) was compared to 'R1b' (5.35 × 10 -3 mutations/generation) and to the overall mutation rate (5.03 × 10 -3 mutations/generation). A difference in allele size distribution was identified as the only cause for these haplogroup specific mutation rates. The haplogroup specific mutation rates were also present within the commercially available Y-STR kits (Yfiler ® , PowerPlex ® Y23 System and Yfiler ® Plus). This observation has consequences for applications where an average Y-STR mutation rate is used, e.g. tMRCA estimations in familial searching and genealogy research. Copyright © 2018 Elsevier B.V. All rights reserved.
Solar energy conversion by photocatalytic overall water splitting

KAUST Repository

Takanabe, Kazuhiro

2015-01-01

to reduce capital cost. Overall water splitting (OWS) by powder-form photocatalysts directly produces H2 as a chemical energy in a single reactor, which does not require any complicated parabolic mirrors and electronic devices. Because of its simplicity
Nuclear reactors built, being built, or planned 1993

International Nuclear Information System (INIS)

1993-08-01

Nuclear Reactors Built, Being Built, or Planned contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1993. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: civilian, production, military, export, and critical assembly
Optimization of operating parameters for gas-phase photocatalytic splitting of H2S by novel vermiculate packed tubular reactor.

Science.gov (United States)

Preethi, V; Kanmani, S

2016-10-01

Hydrogen production by gas-phase photocatalytic splitting of Hydrogen Sulphide (H2S) was investigated on four semiconductor photocatalysts including CuGa1.6Fe0.4O2, ZnFe2O3, (CdS + ZnS)/Fe2O3 and Ce/TiO2. The CdS and ZnS coated core shell particles (CdS + ZnS)/Fe2O3 shows the highest rate of hydrogen (H2) production under optimized conditions. Packed bed tubular reactor was used to study the performance of prepared photocatalysts. Selection of the best packing material is a key for maximum removal efficiency. Cheap, lightweight and easily adsorbing vermiculate materials were used as a novel packing material and were found to be effective in splitting H2S. Effect of various operating parameters like flow rate, sulphide concentration, catalyst dosage, light irradiation were tested and optimized for maximum H2 conversion of 92% from industrial waste H2S. Copyright © 2016 Elsevier Ltd. All rights reserved.
House for Niels Strøyberg

DEFF Research Database (Denmark)

Welling, Helen

2007-01-01

The house for Niels Strøyberg in Hasseris near Aalborg, Denmark, is a notable example of early modernism in an unconventional way. Although Poul Henningsen's approach to the dwelling was thoroughly functional, he added a number of visual effects to provide a sense of dynamism to the spatial...
Nuclear reactors built, being built, or planned 1996

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-08-01

This publication contains unclassified information about facilities, built, being built, or planned in the United States for domestic use or export as of December 31, 1996. The Office of Scientific and Technical Information, U.S. Department of Energy, gathers this information annually from Washington headquarters, and field offices of DOE; from the U.S. Nuclear Regulatory Commission (NRC); from the U. S. reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from U.S. and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled.
Nuclear reactors built, being built, or planned: 1996

International Nuclear Information System (INIS)

1997-08-01

This publication contains unclassified information about facilities, built, being built, or planned in the United States for domestic use or export as of December 31, 1996. The Office of Scientific and Technical Information, U.S. Department of Energy, gathers this information annually from Washington headquarters, and field offices of DOE; from the U.S. Nuclear Regulatory Commission (NRC); from the U. S. reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from U.S. and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled
Fluorescence-based thermal shift data on multidrug regulator AcrR from Salmonella enterica subsp. entrica serovar Typhimurium str. LT2

Directory of Open Access Journals (Sweden)

Babu A. Manjasetty

2016-06-01

Full Text Available The fluorescence-based thermal shift (FTS data presented here include Table S1 and Fig. S1, and are supplemental to our original research article describing detailed structural, FTS, and fluorescence polarization analyses of the Salmonella enterica subsp. entrica serovar Typhimurium str. LT2 multidrug transcriptional regulator AcrR (StAcrR (doi:10.1016/j.jsb.2016.01.008 (Manjasetty et al., 2015 [1]. Table S1 contains chemical formulas, a Chemical Abstracts Service (CAS Registry Number (CAS no., FTS rank (a ligand with the highest rank has the largest difference in the melting temperature (ΔTm, and uses as drug molecules against various pathological conditions of sixteen small-molecule ligands that increase thermal stability of StAcrR. Thermal stability of human enolase 1, a negative control protein, was not affected in the presence of various concentrations of the top six StAcrR binders (Fig. S1.
Hydrogen production by water-splitting and HTGR

International Nuclear Information System (INIS)

Courvoisier, P.; Rastouin, J.; Tilliette, Z.C.

1976-01-01

Some aspects of the use of heat of nuclear origin for the production of hydrogen by water-splitting are considered. General notions pertaining to the yield of chemical cycles are discussed and the heat balance corresponding to two specific processes is evaluated. The possibilities of high temperature reactors, with respect to the coolant temperature levels, are examined from the standpoint of core design and technology of some components. Furthermore these reactors can lead to excellent use of nuclear fuel. The coupling of the nuclear reactor with the chemical plant by means of a secondary helium circuit gives rise to the design of an intermediate heat exchanger, which is an important component of the overall installation [fr
Development of a preliminary PIRT (Phenomena Identification and Ranking Table) of thermal-hydraulic phenomena for 330MWt SMART integral reactor

Energy Technology Data Exchange (ETDEWEB)

Chung, B. D.; Lee, W. J.; Sim, S. K.; Song, J. H.; Kim, H. C.

1997-09-01

The work reported in this document identifies the thermal-hydraulic phenomena that are expected to occur during a number of key transients in a 330 MWt SMART integral reactor which is under development at KAERI. The result of this efforts is based on the current design concept of SMART integral reactor. Although the design is still evolving, the preliminary Phenomena Identification and Ranking Table (PIRT) has been developed based on the experts` knowledge and experience. The preliminary PIRT has been developed by the consensus of KAERI expert panelists and AHP (Analytical Hierarchy Process). Preliminary PIRT developed in this report is intended for use to identify and integrate development areas of further experimental tests needed and thermal-hydraulic models and correlations and code improvements for the safety analysis of the SMART integral reactor. (author). 7 refs., 21 tabs., 22 figs.
Identifying the most likely contributors to a Y-STR mixture using the discrete Laplace method

DEFF Research Database (Denmark)

Andersen, Mikkel Meyer; Eriksen, Poul Svante; Mogensen, Helle Smidt

2015-01-01

In some crime cases, the male part of the DNA in a stain can only be analysed using Y chromosomal markers, e.g. Y-STRs. This may be the case in e.g. rape cases, where the male components can only be detected as Y-STR profiles, because the fraction of male DNA is much smaller than that of female DNA......, which can mask the male results when autosomal STRs are investigated. Sometimes, mixtures of Y-STRs are observed, e.g. in rape cases with multiple offenders. In such cases, Y-STR mixture analysis is required, e.g. by mixture deconvolution, to deduce the most likely DNA profiles from the contributors. We...... demonstrate how the discrete Laplace method can be used to separate a two person Y-STR mixture, where the Y-STR profiles of the true contributors are not present in the reference dataset, which is often the case for Y-STR profiles in real case work. We also briefly discuss how to calculate the weight...
First evidence of multiple populations along the AGB from Strömgren photometry

Science.gov (United States)

Gruyters, Pieter; Casagrande, Luca; Milone, Antonino P.; Hodgkin, Simon T.; Serenelli, Aldo; Feltzing, Sofia

2017-07-01

Spectroscopic studies have demonstrated that nearly all Galactic globular clusters (GCs) harbour multiple stellar populations with different chemical compositions. Moreover, colour-magnitude diagrams based exclusively on Strömgrem photometry have allowed us to identify and characterise multiple populations along the RGB of a large number of clusters. In this paper we show for the first time that Strömgren photometry is also very efficient at identifying multiple populations along the AGB, and demonstrate that the AGB of M 3, M 92, NGC 362, NGC 1851, and NGC 6752 are not consistent with a single stellar population. We also provide a catalogue of RGB and AGB stars photometrically identified in these clusters for further spectroscopic follow-up studies. We combined photometry and elemental abundances from the literature for RGB and AGB stars in NGC 6752 where the presence of multiple populations along the AGB has been widely debated. We find that, while the MS, SGB, and RGB host three stellar populations with different helium and light element abundances, only two populations of AGB stars are present in the cluster. These results are consistent with standard evolutionary theory. Based on observations made with the Isaac Newton Telescope operated on the island of La Palma by the Isaac Newton Group in the Spanish Observatorio del Roque de los Muchachos of the Instituto de Astrofísica de Canarias.Full Tables B.1 and B.2 are only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/603/A37
Preliminary phenomena identification and ranking tables for simplified boiling water reactor Loss-of-Coolant Accident scenarios

International Nuclear Information System (INIS)

Kroeger, P.G.; Rohatgi, U.S.; Jo, J.H.; Slovik, G.C.

1998-04-01

For three potential Loss-of-Coolant Accident (LOCA) scenarios in the General Electric Simplified Boiling Water Reactors (SBWR) a set of Phenomena Identification and Ranking Tables (PIRT) is presented. The selected LOCA scenarios are typical for the class of small and large breaks generally considered in Safety Analysis Reports. The method used to develop the PIRTs is described. Following is a discussion of the transient scenarios, the PIRTs are presented and discussed in detailed and in summarized form. A procedure for future validation of the PIRTs, to enhance their value, is outlined. 26 refs., 25 figs., 44 tabs
Genetic polymorphism study on 12 X STR loci of investigator Argus X STR kit in Bhil tribal population of Madhya Pradesh, India.

Science.gov (United States)

Shrivastava, Pankaj; Jain, Toshi; Gupta, Umang; Trivedi, Veena Ben

2015-05-01

The analysis of 12 X STR loci (DXS10103, DXS8378, DXS7132, DXS10134, DXS10074, DXS10101, DXS10135, DXS7423, DXS10146, DXS10079, HPRTB and DXS10148) belonging to four linkage group was done in 183 (100 males and 83 females) unrelated members of Bhil population. Heterozygosity among the studied 12 X STR loci showed a distribution of from 59.7% to 92.8%. No significant difference was recorded in the allele frequencies of males and females. The loci DXS10135 and DXS10101 were found to be most polymorphic. Haplotype diversity was found to be higher than 0.990 for all the four linkage groups. A total of 86, 69, 71 and 71 haplotypes were observed for linkage group I, II, III and IV, respectively. The results showed departure from Hardy-Weinberg equilibrium with respect to three loci DXS10079, DXS10135 and DXS10101. This is first report on these 12 X STR markers from India. All the loci in the Argus X 12 kit were fairly informative in the Bhil population and the population showed significant genetic variation with all the compared populations from other parts of the world. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
Nuclear reactors built, being built, or planned, 1994

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1994. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; tables of data for reactors operating, being built, or planned; and tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company -- working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).
Nuclear reactors built, being built, or planned: 1995

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-08-01

This report contains unclassified information about facilities built, being built, or planned in the US for domestic use or export as of December 31, 1995. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company--working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).
Nuclear reactors built, being built, or planned, 1994

International Nuclear Information System (INIS)

1995-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1994. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; tables of data for reactors operating, being built, or planned; and tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company -- working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5)

Nuclear reactors built, being built, or planned: 1995

International Nuclear Information System (INIS)

1996-08-01

This report contains unclassified information about facilities built, being built, or planned in the US for domestic use or export as of December 31, 1995. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE; from the US Nuclear Regulatory Commission (NRC); from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations; from US and foreign embassies; and from foreign governmental nuclear departments. The book consists of three divisions, as follows: (1) a commercial reactor locator map and tables of the characteristic and statistical data that follow; a table of abbreviations; (2) tables of data for reactors operating, being built, or planned; and (3) tables of data for reactors that have been shut down permanently or dismantled. The reactors are subdivided into the following parts: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is a US company--working either independently or in cooperation with a foreign company (Part 4). Critical assembly refers to an assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5)
Cluster analysis of European Y-chromosomal STR haplotypes using the discrete Laplace method

DEFF Research Database (Denmark)

Andersen, Mikkel Meyer; Eriksen, Poul Svante; Morling, Niels

2014-01-01

The European Y-chromosomal short tandem repeat (STR) haplotype distribution has previously been analysed in various ways. Here, we introduce a new way of analysing population substructure using a new method based on clustering within the discrete Laplace exponential family that models the probabi......The European Y-chromosomal short tandem repeat (STR) haplotype distribution has previously been analysed in various ways. Here, we introduce a new way of analysing population substructure using a new method based on clustering within the discrete Laplace exponential family that models...... the probability distribution of the Y-STR haplotypes. Creating a consistent statistical model of the haplotypes enables us to perform a wide range of analyses. Previously, haplotype frequency estimation using the discrete Laplace method has been validated. In this paper we investigate how the discrete Laplace...... method can be used for cluster analysis to further validate the discrete Laplace method. A very important practical fact is that the calculations can be performed on a normal computer. We identified two sub-clusters of the Eastern and Western European Y-STR haplotypes similar to results of previous...
Enhanced production of poly(3-hydroxybutyrate) in a novel airlift reactor with in situ cell retention using Azohydromonas australica.

Science.gov (United States)

Gahlawat, Geeta; Sengupta, Bedoshree; Srivastava, Ashok K

2012-09-01

Economic production of biodegradable plastics is a challenge particularly because of high substrate and energy cost inputs for its production. Research efforts are being directed towards innovations to minimize both of the above costs to economize polyhydroxybutyrate (PHB) production. A novel airlift reactor (ALR) with outer aeration and internal settling was utilized in this investigation. Although it featured no power consumption for agitation, it facilitated increased oxygen transfer rate and better cell retention than stirred tank reactor (STR), thereby resulting in enhanced PHB productivity. ALR with in situ cell retention demonstrated a significant improvement in biomass concentration and biopolymer accumulation. The total PHB production rate, specific biomass, and product yield in the ALR were observed to be 0.84 g/h, 0.43 g/g, and 0.32 g/g, respectively. The studies revealed that the volumetric oxygen mass transfer rate and mixing time for ALR were 0.016 s⁻¹ and 3.73 s, respectively, at 2.0 vvm as compared with corresponding values of 0.005 s⁻¹ and 4.95 s, respectively, in STR. This demonstrated that ALR has better oxygen mass transfer and mixing efficiency than STR. Hence, ALR with cell retention would serve as a better bioreactor design for economic biopolymer production than STR, particularly due to its lower cost of operation and simplicity along with its enhanced oxygen and heat transfer rates.
Evaluation of a 13-loci STR multiplex system for Cannabis sativa genetic identification.

Science.gov (United States)

Houston, Rachel; Birck, Matthew; Hughes-Stamm, Sheree; Gangitano, David

2016-05-01

Marijuana (Cannabis sativa) is the most commonly used illicit substance in the USA. The development of a validated method using Cannabis short tandem repeats (STRs) could aid in the individualization of samples as well as serve as an intelligence tool to link multiple cases. For this purpose, a modified 13-loci STR multiplex method was optimized and evaluated according to ISFG and SWGDAM guidelines. A real-time PCR quantification method for C. sativa was developed and validated, and a sequenced allelic ladder was also designed to accurately genotype 199 C. sativa samples from 11 U.S. Customs and Border Protection seizures. Distinguishable DNA profiles were generated from 127 samples that yielded full STR profiles. Four duplicate genotypes within seizures were found. The combined power of discrimination of this multilocus system is 1 in 70 million. The sensitivity of the multiplex STR system is 0.25 ng of template DNA. None of the 13 STR markers cross-reacted with any of the studied species, except for Humulus lupulus (hops) which generated unspecific peaks. Phylogenetic analysis and case-to-case pairwise comparison of 11 cases using F st as genetic distance revealed the genetic association of four groups of cases. Moreover, due to their genetic similarity, a subset of samples (N = 97) was found to form a homogeneous population in Hardy-Weinberg and linkage equilibrium. The results of this research demonstrate the applicability of this 13-loci STR system in associating Cannabis cases for intelligence purposes.
High-throughput sequencing of core STR loci for forensic genetic investigations using the Roche Genome Sequencer FLX platform

DEFF Research Database (Denmark)

Fordyce, Sarah Louise; Avila Arcos, Maria del Carmen; Rockenbauer, Eszter

2011-01-01

repeat units. These methods do not allow for the full resolution of STR base composition that sequencing approaches could provide. Here we present an STR profiling method based on the use of the Roche Genome Sequencer (GS) FLX to simultaneously sequence multiple core STR loci. Using this method...
A case of false mother included with 46 autosomal STR markers

OpenAIRE

Li, Li; Lin, Yuan; Liu, Yan; Zhu, Ruxin; Zhao, Zhenmin; Que, Tingzhi

2015-01-01

Background For solving a maternity case, 19 autosomal short tandem repeats (STRs) were amplified using the AmpF?STR? SinofilerTM kit and PowerPlex? 16 System. Additional 27 autosomal STR loci were analyzed using two domestic kits AGCU 21+1 and STRtyper-10G. The combined maternity index (CMI) was calculated to be 3.3???1013, but the putative mother denied that she had given birth to the child. In order to reach an accurate conclusion, further testing of 20 X-chromosomal short tandem repeats (X...
Mutation rate estimation for 15 autosomal STR loci in a large population from Mainland China.

Science.gov (United States)

Zhao, Zhuo; Zhang, Jie; Wang, Hua; Liu, Zhi-Peng; Liu, Ming; Zhang, Yuan; Sun, Li; Zhang, Hui

2015-09-01

STR, short tandem repeats, are well known as a type of powerful genetic marker and widely used in studying human population genetics. Compared with the conventional genetic markers, the mutation rate of STR is higher. Additionally, the mutations of STR loci do not lead to genetic inconsistencies between the genotypes of parents and children; therefore, the analysis of STR mutation is more suited to assess the population mutation. In this study, we focused on 15 autosomal STR loci. DNA samples from a total of 42,416 unrelated healthy individuals (19,037 trios) from the population of Mainland China collected between Jan 2012 and May 2014 were successfully investigated. In our study, the allele frequencies, paternal mutation rates, maternal mutation rates and average mutation rates were detected. Furthermore, we also investigated the relationship between paternal ages, maternal ages, area, the time of pregnancy and average mutation rate. We found that the paternal mutation rate was higher than the maternal mutation rate and the paternal, maternal, and average mutation rates had a positive correlation with paternal age, maternal age and the time of pregnancy respectively. Additionally, the average mutation rate of coastal areas was higher than that of inland areas.
Estimating stutter rates for Y-STR alleles

DEFF Research Database (Denmark)

Andersen, Mikkel Meyer; Olofsson, Jill Katharina; Mogensen, Helle Smidt

2011-01-01

Stutter peaks are artefacts that arise during PCR amplification of short tandem repeats. Stutter peaks are especially important in forensic case work with DNA mixtures. The aim of the study was primarily to estimate the stutter rates of the AmpFlSTR Yfiler kit. We found that the stutter rates...
Experimental Studies on Assemblies 1 and 2 of the Fast Reactor FR-0. Part 1

Energy Technology Data Exchange (ETDEWEB)

Andersson, T L; Hellstrand, E; Londen, S O; Tiren, L I

1965-08-15

FR0 is a fast zero power reactor built for experiments in reactor physics. It is a split table machine containing vertical fuel elements. 120 kg of U{sup 235} are available as fuel, which is fabricated into metallic plates of 20 % enrichment. The control system comprises 5 spring-loaded safety elements and 3 + 1 elements for startup operations and power control. The reactor went critical in February 1964. The first assemblies studied were made up of undiluted fuel into a cylindrical and a spherical core, respectively, surrounded by a reflector made of copper. The present report describes some experiments made on these systems. Primarily, critical mass determinations, flux distribution measurements and studies of the conversion ratio are dealt with. The measured quantities have been compared with theoretical predictions using various transport theory programmes (DSN, TDC) and cross section sets. The experimental results show that the neutron spectrum in the copper reflector is softer than predicted, but apart from this discrepancy agreement with theory has generally been obtained.
A scalable lock-free hash table with open addressing

DEFF Research Database (Denmark)

Nielsen, Jesper Puge; Karlsson, Sven

2016-01-01

and concurrent operations without any locks. In this paper, we present a new fully lock-free open addressed hash table with a simpler design than prior published work. We split hash table insertions into two atomic phases: first inserting a value ignoring other concurrent operations, then in the second phase......Concurrent data structures synchronized with locks do not scale well with the number of threads. As more scalable alternatives, concurrent data structures and algorithms based on widely available, however advanced, atomic operations have been proposed. These data structures allow for correct...
Post-Mortem Identification of a Fire Carbonized Body by STR Genotyping.

Science.gov (United States)

Dumache, Raluca; Muresan, Camelia; Ciocan, Veronica; Rogobete, Alexandru F; Enache, Alexandra

2016-10-01

Identification of bodies of unknown identity that are victims of exposure to very high temperatures, resulting from fires, plane crashes, and terrorist attacks, represents one of the most difficult sides of forensic genetics, because of the advanced state of decomposition. The aim of this study was the identification of the carbonized cadaver of a fire victim through STR genotyping. We used blood samples obtained from the iliac artery during the autopsy examination as biological samples from the unidentified victim. After DNA isolation and quantification, we proceeded to its amplification using the multiplex PCR kit AmpFlSTR Identifiler. The DNA products were separated using an ABI 3500 genetic analyzer. Further analysis of the data was done using Gene Mapper ID-X version 1.4 software. In this case, it was possible to obtain a complete DNA profile from the biological samples. Due to the fact that the amelogenin gene presented two alleles, X and Y, we concluded that the victim was a man. We conclude that STR profiling of unidentified bodies (carbonized, decomposed) represents a powerful method of human identification in forensic medicine.
STR data for the AmpFlSTR Profiler loci from the three main ethnic population groups (Malay, Chinese and Indian) in Malaysia.

Science.gov (United States)

Lim, K B; Jeevan, N H; Jaya, P; Othman, M I; Lee, Y H

2001-06-01

Allele frequencies for the nine STRs genetic loci included in the AmpFlSTR Profiler kit were obtained from samples of unrelated individuals comprising 139-156 Malays, 149-153 Chinese and 132-135 Indians, residing in Malaysia.
Nuclear Production of Hydrogen Using Thermochemical Water-Splitting Cycles

International Nuclear Information System (INIS)

Brown, L.C.; Besenbruch, G.E.; Schultz, K.R.; Marshall, A.C.; Showalter, S.K.; Pickard, P.S.; Funk, J.F.

2002-01-01

The purpose of this work is to determine the potential for efficient, cost-effective, large-scale production of hydrogen utilizing high-temperature heat from an advanced nuclear power station in a thermochemical water-splitting cycle. We carried out a detailed literature search to create a searchable database with 115 cycles and 822 references. We developed screening criteria to reduce the list to 25 cycles. We used detailed evaluation to select two cycles that appear most promising, the Adiabatic UT-3 cycle and the Sulfur-Iodine cycle. We have selected the Sulfur-Iodine thermochemical water-splitting cycle for further development. We then assessed the suitability of various nuclear reactor types to the production of hydrogen from water using the Sulfur-Iodine cycle. A basic requirement is to deliver heat to the process interface heat exchanger at temperatures up to 900 deg. C. We considered nine categories of reactors: pressurized water-cooled, boiling water-cooled, organic-cooled, alkali metal-cooled, heavy metal-cooled, gas-cooled, molten salt-cooled, liquid-core and gas-core reactors. We developed requirements and criteria to carry out the assessment, considering design, safety, operational, economic and development issues. This assessment process led to our choice of the helium gas-cooled reactor for coupling to the Sulfur-Iodine cycle. In continuing work, we are investigating the improvements that have been proposed to the Sulfur-Iodine cycle and will generate an integrated flowsheet describing a hydrogen production plant powered by a high-temperature helium gas-cooled nuclear reactor. This will allow us to size process equipment and calculate hydrogen production efficiency and capital cost, and to estimate the cost of the hydrogen produced as a function of nuclear reactor cost. (authors)
Genetic polymorphisms of 20 autosomal STR loci in the Vietnamese population from Yunnan Province, Southwest China.

Science.gov (United States)

Zhang, Xiufeng; Hu, Liping; Du, Lei; Nie, Aiting; Rao, Min; Pang, Jing Bo; Nie, Shengjie

2017-05-01

The genetic polymorphisms of 20 autosomal short tandem repeat (STR) loci included in the PowerPlex® 21 kit were evaluated in 522 healthy unrelated Vietnamese from Yunnan, China. All of the loci reached the Hardy-Weinberg equilibrium. These loci were examined to determine allele frequencies and forensic statistical parameters. The combined discrimination power and probability of excluding paternity of the 20 STR loci were 0.999999999999999999999991 26 and 0.999999975, respectively. Results suggested that the 20 STR loci are highly polymorphic, which is suitable for forensic personal identification and paternity testing.
FIX-II/3025, BWR FIX-II Pump Trip Experiment 3025, Immediate Split Size Break

International Nuclear Information System (INIS)

NILSSON, Lars; GUSTAFSSON, Per-Ake; GUSTAFSON, Lennart; JANCZAK, Rajmund; OESTERLUNDH, Ingrid

1992-01-01

1 - Description of test facility: The FIX-II facility is a volume scaled 1:777 representation of a Swedish BWR with external pumps. The pressure vessel contains a 36 rod full length bundle and a spray condenser at the top to allow steady state operation. The downcomer, bypass channels and guide tube volumes are represented by external piping. The intact loop represents three of the four external reactor loops. The broken loop is constructed such that both guillotine breaks and split breaks may be simulated. The facility is equipped with ADS-simulation, but no ECCS injection are included. The FIX-II loop is also suited to investigate response of pump trips and MSIV closures in internal pump reactors. 2 - Description of test: Test 3025 simulates an intermediate size split break in one of the four main recirculation lines. The break area was 31 per cent of the scaled down pipe area of the reactor. The initial power of the 36-rod bundle was 3.38 MW, corresponding to the hot channel power of the reactor
Shaking table qualification tests of mechanical and electrical components

International Nuclear Information System (INIS)

Jurukovski, D.

1993-01-01

This presentation covers the experience of the Institute of Earthquake Engineering and Engineering Seismology, Skopje, Republic of Macedonia in seismic qualification of mechanical components by shaking table testing. The characteristics of the biaxial seismic and single component shaking tables used at the Institute are given. Some examples of the experience from performed test for reactor components are included
Evaluation of reliability on STR typing at leukemic patients used for forensic purposes.

Science.gov (United States)

Filoglu, G; Bulbul, O; Rayimoglu, G; Yediay, F E; Zorlu, T; Ongoren, S; Altuncul, H

2014-06-01

Over the past decades, main advances in the field of molecular biology, coupled with benefits in genomic technologies, have led to detailed molecular investigations in the genetic diversity generated by researchers. Short tandem repeat (STR) loci are polymorphic loci found throughout all eukaryotic genome. DNA profiling identification, parental testing and kinship analysis by analysis of STR loci have been widely used in forensic sciences since 1993. Malignant tissues may sometimes be the source of biological material for forensic analysis, including identification of individuals or paternity testing. There are a number of studies on microsatellite instability in different types of tumors by comparing the STR profiles of malignant and healthy tissues on the same individuals. Defects in DNA repair pathways (non-repair or mis-repair) and metabolism lead to an accumulation of microsatellite alterations in genomic DNA of various cancer types that result genomic instabilities on forensic analyses. Common forms of genomic instability are loss of heterozygosity (LOH) and microsatellite instability (MSI). In this study, the applicability of autosomal STR markers, which are routinely used in forensic analysis, were investigated in order to detect genotypes in blood samples collected from leukemic patients to estimate the reliability of the results when malignant tissues are used as a source of forensic individual identification. Specimens were collected from 90 acute and 10 chronic leukemia volunteers with oral swabs as well as their paired peripheral blood samples from the Oncology Centre of the Department of Hematology at Istanbul University, during the years 2010-2011. Specimens were tested and compared with 16 somatic STR loci (CSFIPO, THO1, TPOX, vWA, D2S1338, D3S1358, D5S818, D7S820, D8S1179, D13S317, D16S539, D18S51, D19S433, D21S11 and FGA) widely used in forensic identification and kinship. Only two STR instabilities were encountered among 100 specimens. An MSI in
Reactor utilization, Annex A

International Nuclear Information System (INIS)

Martinc, R.; Stanic, A.

1984-01-01

Reactor was operated until August 1984 due to prohibition issued by the Ministry since the reactor does not have the emergency cooling system nor special filters in the ventilation system yet. This means that the operation plan was fulfilled by 69%. This annex includes detailed tables containing data about utilization of reactor experimental channels, irradiated samples, as well as interruptions of operation. Detailed data about reactor power during this period are shown as well
Determination of combined sibship indices "gray zone" using 15 STR loci for central Bosnian human population.

Science.gov (United States)

Musanovic, Jasmin; Filipovska-Musanovic, Marijana; Kovacevic, Lejla; Buljugic, Dzenisa; Dzehverovic, Mirela; Avdic, Jasna; Marjanovic, Damir

2012-05-01

In our previous population studies of Bosnia and Herzegovina human population, we have used autosomal STR, Y-STR, and X-STR loci, as well as Y-chromosome NRY biallelic markers. All obtained results were included in Bosnian referent database. In order of future development of applied population molecular genetics researches of Bosnia and Herzegovina human population, we have examined the effectiveness of 15 STR loci system in determination of sibship by using 15 STR loci and calculating different cut-off points of combined sibship indices (CSI) and distribution of sharing alleles. From the perspective of its application, it is very difficult and complicated to establish strict CSI cut-off values for determination of the doubtless sibship. High statistically significant difference between the means of CSI values and in distribution of alleles sharing in siblings and non-siblings was noticed (P < 0.0001). After constructing the "gray zone", only one false positive result was found in three CSI cut-off levels with the highest percent of determined sibship/non-sibship at the CSI = 0.067, confirming its practical benefit. Concerning the distribution of sharing alleles, it is recommended as an informative estimator for its usage within Bosnia and Herzegovina human population.
The STR/ort mouse model of spontaneous osteoarthritis - an update.

Science.gov (United States)

Staines, K A; Poulet, B; Wentworth, D N; Pitsillides, A A

2017-06-01

Osteoarthritis is a degenerative joint disease and a world-wide healthcare burden. Characterized by cartilage degradation, subchondral bone thickening and osteophyte formation, osteoarthritis inflicts much pain and suffering, for which there are currently no disease-modifying treatments available. Mouse models of osteoarthritis are proving critical in advancing our understanding of the underpinning molecular mechanisms. The STR/ort mouse is a well-recognized model which develops a natural form of osteoarthritis very similar to the human disease. In this Review we discuss the use of the STR/ort mouse in understanding this multifactorial disease with an emphasis on recent advances in its genetics and its bone, endochondral and immune phenotypes. Copyright © 2016 The Authors. Published by Elsevier Ltd.. All rights reserved.

Thai research reactor

International Nuclear Information System (INIS)

Aramrattana, M.

1987-01-01

The Office of Atomic Energy for Peace (OAEP) was established in 1962, as a reactor center, by the virtue of the Atomic Energy for Peace Act, under operational policy and authority of the Thai Atomic Energy for Peace Commission (TAEPC); and under administration of Ministry of Science, Technology and Energy. It owns and operates the only Thai Research Reactor (TRR-1/M1). The TRR-1/M1 is a mixed reactor system constituting of the old MTR type swimming pool, irradiation facilities and cooling system; and TRIGA Mark III core and control instrumentation. The general performance of TRR-1/M1 is summarized in Table I. The safe operation of TRR-1/M1 is regulated by Reactor Safety Committee (RSC), established under TAEPC, and Health Physics Group of OAEP. The RCS has responsibility and duty to review of and make recommendations on Reactor Standing Orders, Reactor Operation Procedures, Reactor Core Loading and Requests for Reactor Experiments. In addition,there also exist of Emergency Procedures which is administered by OAEP. The Reactor Operation Procedures constitute of reactor operating procedures, system operating procedures and reactor maintenance procedures. At the level of reactor routine operating procedures, there is a set of Specifications on Safety and Operation Limits and Code of Practice from which reactor shift supervisor and operators must follow in order to assure the safe operation of TRR-1/M1. Table II is the summary of such specifications. The OAEP is now upgrading certain major components of the TRR-1/M1 such as the cooling system, the ventilation system and monitoring equipment to ensure their adequately safe and reliable performance under normal and emergency conditions. Furthermore, the International Atomic Energy Agency has been providing assistance in areas of operation and maintenance and safety analysis. (author)
Embryo splitting

Directory of Open Access Journals (Sweden)

Karl Illmensee

2010-04-01

Full Text Available Mammalian embryo splitting has successfully been established in farm animals. Embryo splitting is safely and efficiently used for assisted reproduction in several livestock species. In the mouse, efficient embryo splitting as well as single blastomere cloning have been developed in this animal system. In nonhuman primates embryo splitting has resulted in several pregnancies. Human embryo splitting has been reported recently. Microsurgical embryo splitting under Institutional Review Board approval has been carried out to determine its efficiency for blastocyst development. Embryo splitting at the 6–8 cell stage provided a much higher developmental efficiency compared to splitting at the 2–5 cell stage. Embryo splitting may be advantageous for providing additional embryos to be cryopreserved and for patients with low response to hormonal stimulation in assisted reproduction programs. Social and ethical issues concerning embryo splitting are included regarding ethics committee guidelines. Prognostic perspectives are presented for human embryo splitting in reproductive medicine.
Genetics analysis of 38 STR loci in Uygur population from Southern Xinjiang of China.

Science.gov (United States)

Yuan, Li; Liu, Haibo; Liao, Qinxiang; Xu, Xu; Chen, Wen; Hao, Shicheng

2016-05-01

The allele frequencies and statistical parameters of 38 autosomal short tandem repeat (STR) loci were analyzed in the Uygur population from Southern Xinjiang of China with 290 unrelated individuals. The results show these 38 STR loci have high or medium power of discrimination and probabilities of exclusion. All loci are in Hardy-Weinberg equilibrium. The genetic distances between the Uygur population and other Chinese populations were also estimated.
Power reactors in Member States. 1978 edition

International Nuclear Information System (INIS)

1978-01-01

The computer-based reactor listing gives information on reactor core characteristics and plant systems for all power reactors in operation under construction and planned. The following two tables are included to give a general picture of the overall situation: Reactor types and net electrical power; Reactor units and net electrical power by country and cumulated by year
Influence of preirradiation history of E. coli WP2 cells on the residual fixation of mutations in rpsL. (strA) locus

Energy Technology Data Exchange (ETDEWEB)

Filippov, V D

1986-07-01

The values of residual fixation of strA mutations in E.coli culture, irradiated by UV-light (6.8 J/m/sup 2/) in different physiological states and conforming to different in depth strA mutation frequency decrease in postirradiation incubation under conditions unfavourable for protein synthesis are determined. By residual fixation one should mean accumulation of strA mutations stable to antimutagenous effect of photoreactivating light in cell population incubated in buffer after UV radiation. It is established that residual fixation is small in cultures, conforming to deep decrease, and is a factor (about 40% of strA mutations is fixed) in a culture, conforming to moderate decrease (about 60% of strA mutations disappears) of mutation frequency in incubation under conditions unfavourable for protein synthesis. The conclusion is made that the depth of strA mutation frequency decrease, taking place under the influence of mfd system, depends on the level of residual fixation of this mutations. It is supposed that residual fixation is caused by rpsL (strA) locus introduction in replication cycle initiated after radiation.
Statistical probability tables CALENDF program

International Nuclear Information System (INIS)

Ribon, P.

1989-01-01

The purpose of the probability tables is: - to obtain dense data representation - to calculate integrals by quadratures. They are mainly used in the USA for calculations by Monte Carlo and in the USSR and Europe for self-shielding calculations by the sub-group method. The moment probability tables, in addition to providing a more substantial mathematical basis and calculation methods, are adapted for condensation and mixture calculations, which are the crucial operations for reactor physics specialists. However, their extension is limited by the statistical hypothesis they imply. Efforts are being made to remove this obstacle, at the cost, it must be said, of greater complexity
Reconstructing recent human phylogenies with forensic STR loci: A statistical approach

Directory of Open Access Journals (Sweden)

Khan Faisal

2005-09-01

Full Text Available Abstract Background Forensic Short Tandem Repeat (STR loci are effective for the purpose of individual identification, and other forensic applications. Most of these markers have high allelic variability and mutation rate because of which they have limited use in the phylogenetic reconstruction. In the present study, we have carried out a meta-analysis to explore the possibility of using only five STR loci (TPOX, FES, vWA, F13A and Tho1 to carry out phylogenetic assessment based on the allele frequency profile of 20 world population and north Indian Hindus analyzed in the present study. Results Phylogenetic analysis based on two different approaches – genetic distance and maximum likelihood along with statistical bootstrapping procedure involving 1000 replicates was carried out. The ensuing tree topologies and PC plots were further compared with those obtained in earlier phylogenetic investigations. The compiled database of 21 populations got segregated and finely resolved into three basal clusters with very high bootstrap values corresponding to three geo-ethnic groups of African, Orientals, and Caucasians. Conclusion Based on this study we conclude that if appropriate and logistic statistical approaches are followed then even lesser number of forensic STR loci are powerful enough to reconstruct the recent human phylogenies despite of their relatively high mutation rates.
Prediction of autosomal STR typing success in ancient and Second World War bone samples.

Science.gov (United States)

Zupanič Pajnič, Irena; Zupanc, Tomaž; Balažic, Jože; Geršak, Živa Miriam; Stojković, Oliver; Skadrić, Ivan; Črešnar, Matija

2017-03-01

Human-specific quantitative PCR (qPCR) has been developed for forensic use in the last 10 years and is the preferred DNA quantification technique since it is very accurate, sensitive, objective, time-effective and automatable. The amount of information that can be gleaned from a single quantification reaction using commercially available quantification kits has increased from the quantity of nuclear DNA to the amount of male DNA, presence of inhibitors and, most recently, to the degree of DNA degradation. In skeletal remains samples from disaster victims, missing persons and war conflict victims, the DNA is usually degraded. Therefore the new commercial qPCR kits able to assess the degree of degradation are potentially able to predict the success of downstream short tandem repeat (STR) typing. The goal of this study was to verify the quantification step using the PowerQuant kit with regard to its suitability as a screening method for autosomal STR typing success on ancient and Second World War (WWII) skeletal remains. We analysed 60 skeletons excavated from five archaeological sites and four WWII mass graves from Slovenia. The bones were cleaned, surface contamination was removed and the bones ground to a powder. Genomic DNA was obtained from 0.5g of bone powder after total demineralization. The DNA was purified using a Biorobot EZ1 device. Following PowerQuant quantification, DNA samples were subjected to autosomal STR amplification using the NGM kit. Up to 2.51ng DNA/g of powder were extracted. No inhibition was detected in any of bones analysed. 82% of the WWII bones gave full profiles while 73% of the ancient bones gave profiles not suitable for interpretation. Four bone extracts yielded no detectable amplification or zero quantification results and no profiles were obtained from any of them. Full or useful partial profiles were produced only from bone extracts where short autosomal (Auto) and long degradation (Deg) PowerQuant targets were detected. It is
Temperatur- og tøjningsmålinger i Østrør - Limfjordstunnel

DEFF Research Database (Denmark)

Hansen, Lars Pilegaard

Laboratoriet for Bærende Konstruktioner, Instituttet for Bygningsteknik, Aalborg Universitetscenter har i samarbejde med Rambøll og Hannemann A/S, Nørresundby udført temperatur- og tøjningsmålinger på en tunnelvæg i østrøret af Limfjordstunnellen.......Laboratoriet for Bærende Konstruktioner, Instituttet for Bygningsteknik, Aalborg Universitetscenter har i samarbejde med Rambøll og Hannemann A/S, Nørresundby udført temperatur- og tøjningsmålinger på en tunnelvæg i østrøret af Limfjordstunnellen....
Estimating the probability of allelic drop-out of STR alleles in forensic genetics

DEFF Research Database (Denmark)

Tvedebrink, Torben; Eriksen, Poul Svante; Mogensen, Helle Smidt

2009-01-01

In crime cases with available DNA evidence, the amount of DNA is often sparse due to the setting of the crime. In such cases, allelic drop-out of one or more true alleles in STR typing is possible. We present a statistical model for estimating the per locus and overall probability of allelic drop......-out using the results of all STR loci in the case sample as reference. The methodology of logistic regression is appropriate for this analysis, and we demonstrate how to incorporate this in a forensic genetic framework....
Nuclear reactor

International Nuclear Information System (INIS)

Schulze, I.; Gutscher, E.

1980-01-01

The core contains a critical mass of UN or U 2 N 3 in the form of a noncritical solution with melted Sn being kept below a N atmosphere. The lining of the reactor core consists of graphite. If fission progresses part of the melted metal solution is removed and cleaned from fission products. The reactor temperatures lie in the range of 300 to 2000 0 C. (Examples and tables). (RW) [de
Fetal gender determination through Y-STR analysis of maternal ...

African Journals Online (AJOL)

Hanaa M.H. Aal-Hamdan

2014-10-01

Oct 1, 2014 ... Fetal gender determination through Y-STR analysis of maternal plasma during the third trimester of pregnancy. Hanaa M.H. Aal-Hamdan, Ahmed M. Refaat *, Saranya R. Babu,. Abdul Rauf Choudhry. Department of Forensic Biology, College of Forensic Sciences, Naif Arab University for Security Sciences, ...
The influence of preirradiation history of E. coli WP2 cells on the residual fixation of mutations in rpsL. (strA) locus

International Nuclear Information System (INIS)

Filippov, V.D.

1986-01-01

The values of residual fixation of strA mutations in E.coli culture, irradiated by UV-light (6.8 J/m 2 ) in different physiological states and conforming to different in depth strA mutation frequency decrease in postirradiation incubation under conditions unfavourable for protein synthesis are determined. By residual fixation one should mean accumulation of strA mutations stable to antimutagenous effect of photoreactivating light in cell population incubated in buffer after UV radiation. It is established that residual fixation is small in cultures, conforming to deep decrease, and is a factor (about 40% of strA mutations is fixed) in a culture, conforming to moderate decrease (about 60% of strA mutations disappears) of mutation frequency in incubation under conditions unfavourable for protein synthesis. The conclusion is made that the depth of strA mutation frequency decrease, taking place under the influence of mfd system, depends on the level of residual fixation of this mutations. It is supposed that residual fixation is caused by rpsL (strA) locus introduction in replication cycle initiated after radiation
Allele frequency distribution for 15 autosomal STR loci in Afridi Pathan population of Uttar Pradesh, India.

Science.gov (United States)

Noor, Sabahat; Ali, Shahnaz; Eaaswarkhanth, Muthukrishnan; Haque, Ikramul

2009-11-01

Allele frequencies of the 15 autosomal short tandem repeat (STR) loci D8S1179, D21S11, D7S820, CSF1PO D19S433, vWA, TPOX, D18S51, D3S1358, THO1, D13S317, D16S539, D2S1338, D5S818 and FGA were determined in Afridi Pathan population of Uttar Pradesh, India. All the 15 STR loci studied were found to be highly polymorphic with respect to observed heterozygosity values. Adherence to the expectations of the Hardy-Weinberg equilibrium (HWE) was confirmed for all the loci with an exception of TPOX and FGA. The allele 12 in CSF1PO was found to be most frequent. The power of discrimination was found to be high ranging from a minimum of 0.858 for the locus CSFIPO to maximum of 0.962 for the locus FGA, thereby facilitating the validation and efficiency of these STR markers in human identification. Population differentiation test between the studied and neighboring populations revealed significant differences at several loci suggesting the endogamous nature of the studied population. To the best of our knowledge, Afridi Pathan population has not been explored genetically for generating forensic data on STR markers. Therefore, STR allele frequency data of this unique population is a valuable contribution to the existing DNA database on Indian populations.
Sensitivity Measurement of a long SPND by a Split Neutron Irradiation

International Nuclear Information System (INIS)

Choi, Young San; Park, Sang Jun; Jung, Hwan Sung

2006-01-01

A Self Powered neutron Detector (SPND) has been used effectively as an in-core neutron monitor for a long time both in nuclear research reactors and power reactors due to its very simple dimensions and structures. For power reactor applications, Rhodium, Vanadium, Platinum, and Silver are usually used as the typical emitter materials for the SPNDs. The SPNDs with a Rhodium emitter (Rh-SPNDs) are most frequently used at Korean Standard Nuclear Power stations (KSNP) as a fixed incore neutron detector. This paper describes a new method to measure the neutron sensitivity of the Rh-SPNDs with a long sensitive length at a horizontal beam tube of HANARO by a split irradiation of them
Nuclear reactor safety systems

International Nuclear Information System (INIS)

Ball, R.M.; Roberts, R.C.

1980-01-01

A safety system for shutting down a nuclear reactor under overload conditions is described. The system includes a series of parallel-connected computer memory type look-up tables each of which receives data on a particular reactor parameter and in each of which a precalculated functional value for that parameter is stored indicative of the percentage of maximum reactor load that the parameter contributes. The various functional values corresponding to the actual measured parameters are added together to provide a control signal used to shut down the reactor under overload conditions. (U.K.)
Validation of a combined autosomal/Y-chromosomal STR approach for analyzing typical biological stains in sexual-assault cases.

Science.gov (United States)

Purps, Josephine; Geppert, Maria; Nagy, Marion; Roewer, Lutz

2015-11-01

DNA testing is an established part of the investigation and prosecution of sexual assault. The primary purpose of DNA evidence is to identify a suspect and/or to demonstrate sexual contact. However, due to highly uneven proportions of female and male DNA in typical stains, routine autosomal analysis often fails to detect the DNA of the assailant. To evaluate the forensic efficiency of the combined application of autosomal and Y-chromosomal short tandem repeat (STR) markers, we present a large retrospective casework study of probative evidence collected in sexual-assault cases. We investigated up to 39 STR markers by testing combinations of the 16-locus NGMSElect kit with both the 23-locus PowerPlex Y23 and the 17-locus Yfiler kit. Using this dual approach we analyzed DNA extracts from 2077 biological stains collected in 287 cases over 30 months. To assess the outcome of the combined approach in comparison to stand-alone autosomal analysis we evaluated informative DNA profiles. Our investigation revealed that Y-STR analysis added up to 21% additional, highly informative (complete, single-source) profiles to the set of reportable autosomal STR profiles for typical stains collected in sexual-assault cases. Detection of multiple male contributors was approximately three times more likely with Y-chromosomal profiling than with autosomal STR profiling. In summary, 1/10 cases would have remained inconclusive (and could have been dismissed) if Y-STR analysis had been omitted from DNA profiling in sexual-assault cases. Copyright © 2015 The Authors. Published by Elsevier Ireland Ltd.. All rights reserved.
The Origin of Workerless Parasites in Leptothorax (S. Str. (Hymenoptera: Formicidae

Directory of Open Access Journals (Sweden)

Jürgen Heinze

1995-01-01

Full Text Available The evolutionary origin of workerless parasitic ants parasitizing colonies of Leptothorax (s.str. is investigated using data on morphology, chromosome number, and allozyme phenotype of both social parasites and their hosts. Of the three previously proposed pathways, the evolution of workerless parasites from guest ants or slave-makers is unlikely, at least according to a phenogram obtained by UPGMA clustering of Nei's similarities based on seven enzymes, lntraspecific evolution of the workerless parasites Doronomyrmex goesswaldi, D. kutteri, and D. pacis from their common host, Leptothorax acervorum cannot be excluded with the present data. The workerless parasite L. paraxenus, however, clearly differs from its host, L. cf. canadensis, in morphology and biochemistry, and most probably did not evolve from the latter species. It is proposed to synonymize Doronomyrmex under Leptothorax (s.str..
Population genetic analysis of the GlobalFiler STR loci in 748 individuals from the Kazakh population of Xinjiang in northwest China.

Science.gov (United States)

Zhang, Honghua; Yang, Shuping; Guo, Wei; Ren, Bo; Pu, Liwen; Ma, Teng; Xia, Mingying; Jin, Li; Li, Liming; Li, Shilin

2016-09-01

The six-dye GlobalFiler™ Express PCR amplification kit incorporates 21 commonly used autosomal short tandem repeat (STR) loci and three gender determination loci. In this study, we analyzed the GlobalFiler STR loci on 748 unrelated individuals from a Chinese Kazakh population of Xinjiang, China. No significant deviations from Hardy-Weinberg equilibrium and linkage disequilibrium were observed within and between 21 autosomal STR loci. SE33 showed the greatest power of discrimination in Kazakh population. The combined power of discrimination of Kazakh was 99.999999999999999999999996797 %. No significant differences of allele frequencies were observed between Kazakh and Uyghur at all 15 tested STR loci, as well as Mongolian. Significant differences were only observed between Kazakh and the other Chinese populations at TH01. Multiple STR loci showed significant differences between Kazakh and Arab, as well as South Portuguese. The multidimensional scaling plot (MDS) plot and neighbor-joining tree also showed Kazakh is genetically close to Uyghur.
Status of the R and D activities on fast reactors and ADS in Brazil

International Nuclear Information System (INIS)

Maiorino, Jose Rubens

2001-01-01

Research and Development in Nuclear Science and Technology is conducted by Research Institutes of the Brazilian Nuclear Energy Commission. In Fast Reactor, R and D activities started in the sixties, and in 1972 a small Na loop (100 kW) was constructed. At the same time, during the seventies at IPEN, research in cooperation with GA for Gas Cooled Fast Breeder Reactor was conducted. The motivation of such research was Thorium Fuel Cycle. As a result of this research a Helium Loop was constructed and a Split Table Critical Assembly (ZPR) was designed. During the eighties, an agreement with ANSALDO-NIRA resulted in an acquisition of a Sodium Loop for Thermohydraulics studies, however it never had been assembled. At the same time, a concept of a Binary Breeder Reactor using two cycles, Th and U, was developed. During the nineties, a National Program to conduct R and D (pyroprocess; U-Zr Metallic Fuel; HT-9; Electromagnetic Pump; and a conceptual design of a Experimental Reactor (60/20 MWth/MWe)) was proposed, however it was closed at the end of the decade. Now, only academic research is being conducted, and it is summarized in this report. Basically, they are: an integral lead fast reactor concept for developing countries, and an alternative concept for a fast energy amplifier accelerator driven system. The first is an combination of best characteristics of the American Integral Fast Reactor and the Russian Lead Cooled Reactor. The second is a conceptual design of ADS helium cooled imbedded in a solid lead subcritical array of fuel, using more than one point of spallation trying to reduce the requirement for energy and current of the accelerator

The application of mathematical transformation in order to define edges of pluton Valja Strž

Directory of Open Access Journals (Sweden)

Ignjatović Snežana M.

2014-01-01

Full Text Available The Timok Magmatic Complex (TMC belongs to the East Serbian and is the largest volcanic area in our country. The largest pluton in this area is Valja Strž. This pluton is situated in the northwestern part of the complex. Applying different methods of mathematical transformation on aeromagnetic data facilitated outlining of pluton edges in subsurface of surrounding rocks. In this paper we used mathematical transformation on anomaly values of the magnetic field, obtained from processing of aeromagnetic data. In order to detect the edges of pluton Valja Strž we used following set of mathematical transformation: first vertical derivative, the total horizontal derivative, tilt derivative, upward continuation, and combination of upward continuation and tilt derivative. Results of application of mathematical transformation showed that outspread of the pluton Valja Strž in the subsurface is larger than its extend on the surface.
An unusual occurrence of repeated single allele variation on Y-STR locus DYS458

OpenAIRE

Shrivastava, Pankaj; Trivedi, Veena Ben; Jain, Toshi; Ali, Mehmood

2016-01-01

Six brothers were accused of gagging and raping a woman. A single male Y-STR profile was obtained from vaginal smear swab and clothes of the victim, which did not match with the DNA profile of the accused brothers. As a reference point, the blood sample of their father (aged 87 years) was also analyzed with the same kit. The Y-STR haplotype of all six brothers was found to be the same as that of their father except at locus DYS458. At this locus, while the eldest, second and fourth siblings s...
Two new European species of Dicranomyia Stephens, 1829, related to D. (s.str.) chorea (Meigen, 1818) (Diptera, Limnoniidae)

NARCIS (Netherlands)

Stary, Jaroslav

1993-01-01

Diagnostic features of the so-called Dicranomyia chorea group are discussed. Two new species are described, D. (s. str.) radegasti sp. n. from Czechoslovakia and D. (s. str.) kamakensis sp. n. from Bulgaria, and their male genitalia are illustrated. Attention is paid to the shape of the tarsal
Estimation of Missing Observations in Two-Level Split-Plot Designs

DEFF Research Database (Denmark)

Almimi, Ashraf A.; Kulahci, Murat; Montgomery, Douglas C.

2008-01-01

Inserting estimates for the missing observations from split-plot designs restores their balanced or orthogonal structure and alleviates the difficulties in the statistical analysis. In this article, we extend a method due to Draper and Stoneman to estimate the missing observations from unreplicated...... two-level factorial and fractional factorial split-plot (FSP and FFSP) designs. The missing observations, which can either be from the same whole plot, from different whole plots, or comprise entire whole plots, are estimated by equating to zero a number of specific contrast columns equal...... to the number of the missing observations. These estimates are inserted into the design table and the estimates for the remaining effects (or alias chains of effects as the case with FFSP designs) are plotted on two half-normal plots: one for the whole-plot effects and the other for the subplot effects...
Analysis of operator splitting errors for near-limit flame simulations

Energy Technology Data Exchange (ETDEWEB)

Lu, Zhen; Zhou, Hua [Center for Combustion Energy, Tsinghua University, Beijing 100084 (China); Li, Shan [Center for Combustion Energy, Tsinghua University, Beijing 100084 (China); School of Aerospace Engineering, Tsinghua University, Beijing 100084 (China); Ren, Zhuyin, E-mail: zhuyinren@tsinghua.edu.cn [Center for Combustion Energy, Tsinghua University, Beijing 100084 (China); School of Aerospace Engineering, Tsinghua University, Beijing 100084 (China); Lu, Tianfeng [Department of Mechanical Engineering, University of Connecticut, Storrs, CT 06269-3139 (United States); Law, Chung K. [Center for Combustion Energy, Tsinghua University, Beijing 100084 (China); Department of Mechanical and Aerospace Engineering, Princeton University, Princeton, NJ 08544 (United States)

2017-04-15

High-fidelity simulations of ignition, extinction and oscillatory combustion processes are of practical interest in a broad range of combustion applications. Splitting schemes, widely employed in reactive flow simulations, could fail for stiff reaction–diffusion systems exhibiting near-limit flame phenomena. The present work first employs a model perfectly stirred reactor (PSR) problem with an Arrhenius reaction term and a linear mixing term to study the effects of splitting errors on the near-limit combustion phenomena. Analysis shows that the errors induced by decoupling of the fractional steps may result in unphysical extinction or ignition. The analysis is then extended to the prediction of ignition, extinction and oscillatory combustion in unsteady PSRs of various fuel/air mixtures with a 9-species detailed mechanism for hydrogen oxidation and an 88-species skeletal mechanism for n-heptane oxidation, together with a Jacobian-based analysis for the time scales. The tested schemes include the Strang splitting, the balanced splitting, and a newly developed semi-implicit midpoint method. Results show that the semi-implicit midpoint method can accurately reproduce the dynamics of the near-limit flame phenomena and it is second-order accurate over a wide range of time step size. For the extinction and ignition processes, both the balanced splitting and midpoint method can yield accurate predictions, whereas the Strang splitting can lead to significant shifts on the ignition/extinction processes or even unphysical results. With an enriched H radical source in the inflow stream, a delay of the ignition process and the deviation on the equilibrium temperature are observed for the Strang splitting. On the contrary, the midpoint method that solves reaction and diffusion together matches the fully implicit accurate solution. The balanced splitting predicts the temperature rise correctly but with an over-predicted peak. For the sustainable and decaying oscillatory
Reactor loops at Chalk River

International Nuclear Information System (INIS)

Sochaski, R.O.

1962-07-01

This report describes broadly the nine in-reactor loops, and their components, located in and around the NRX and NRU reactors at Chalk River. First an introduction and general description is given of the loops and their function, supplemented with a table outlining some loop specifications and nine simplified flow sheets, one for each individual loop. The report then proceeds to classify each loop into two categories, the 'main loop circuit' and the 'auxiliary circuit', and descriptions are given of each circuit's components in turn. These components, in part, are comprised of the main loop pumps, the test section, loop heaters, loop coolers, delayed-neutron monitors, surge tank, Dowtherm coolers, loop piping. Here again photographs, drawings and tables are included to provide a clearer understanding of the descriptive literature and to include, in tables, some specifications of the more important components in each loop. (author)
Design and validation of a highly discriminatory 10-locus Y-chromosome STR multiplex system

KAUST Repository

D'Amato, María Eugenia

2011-03-01

The Y-chromosome STRs (short tandem repeat) markers are routinely utilized in the resolution of forensic casework related to sexual assault. For this, the forensic community has adopted a set of eleven (core) Y-STR that is incorporated in all commercial diagnostic systems. Our previous studies of Y-STR polymorphisms in the South African population identified low levels of diversity and discrimination capacity for many commercial marker sets, determining a limited applicability of these systems to the local population groups. To overcome this shortcoming, we designed a Y-STR 10-plex system that shows higher discriminatory capacity (DC) than available commercial systems. The markers were selected from a population group of 283 individuals with African, European and Asian ancestry genotyped at 45 Y-STRs, applying an optimization based selection procedure to achieve the highest possible DC with the minimal number of markers. The 10-plex was satisfactorily subjected to developmental validation tests following the SWGDAM guidelines and shows potential for its application to genealogical and evolutionary studies. © 2010 Elsevier Ireland Ltd.
Reference tabulation of neutronic data by the concept of probability tables

International Nuclear Information System (INIS)

Bouhlal, O.K.; Ribon, P.

1994-01-01

In this paper, effective cross-sections will be computed using a model based on probability tables and the precision of results will be then examined. These tables are established from the moments of cross-sections and they consequently present interesting properties such the possibility of treating independently the nuclear effects which characterize the reactor core. Our purpose is to show that with this model fine structure resonances can be taken into account with good precision. This is achieved by the use of the 'energy groups condensation' rule which has the advantage of reducing the calculation time. Probability tables are first established on a very fine mesh and then with variable increments to analyze the effect of the increment width on precision. Reference tabulation are computed when results are satisfactory. Calculations are done for a medium that contains uranium 238 isotope which presents wide range of resonances and which is frequently present in the reactor core. (author). 1 tab., 4 refs
A special correcting winding for the l = 2 torsatron with split-type helical coils

International Nuclear Information System (INIS)

Kotenko, V.G.

2012-01-01

A split-type special correcting winding (split-type SCW) for the l = 2 torsatron toroidal magnetic system with split-type helical coils is considered. The split-type SCW gives the possibility of controlling the position of the magnetic surface configuration in the direction perpendicular to the torus equatorial plane. Numerical simulations were carried out to investigate the influence of the split-type SCW magnetic field on centered and distant relative to the torus surface magnetic surface configuration with a plane magnetic axis, being promising for the fusion reactor. The configuration is realized in the l = 2 torsatron with split-type helical coils and with the coils of an additional toroidal magnetic field. The calculations show that the split-type SCW magnetic field influence on the initial magnetic surface configuration leads mainly to the magnetic surface configuration displacement along the straight z axis of torus rotation. The displacement of ∼0.1a, a is the minor radius of the torus, has no critical effect on the magnetic surface parameters. An idea on the split-type SCW magnetic field structure is obtained by numerical simulations of the effect of this field as a minority magnetic field imposed on the magnetic field of a well-known configuration. The split-type SCW magnetic field is directed, predominantly along the major radius of the torus within its volume. The displacement range of the closed magnetic surface configuration depends on the split-type SCW magnetic field value.
MiniX-STR multiplex system population study in Japan and application to degraded DNA analysis.

Science.gov (United States)

Asamura, H; Sakai, H; Kobayashi, K; Ota, M; Fukushima, H

2006-05-01

We sought to evaluate a more effective system for analyzing X-chromosomal short tandem repeats (X-STRs) in highly degraded DNA. To generate smaller amplicon lengths, we designed new polymerase chain reaction (PCR) primers for DXS7423, DXS6789, DXS101, GATA31E08, DXS8378, DXS7133, DXS7424, and GATA165B12 at X-linked short tandem repeat (STR) loci, devising two miniX-multiplex PCR systems. Among 333 Japanese individuals, these X-linked loci were detected in amplification products ranging in length from 76 to 169 bp, and statistical analyses of the eight loci indicated a high usefulness for the Japanese forensic practice. Results of tests on highly degraded DNA indicated the miniX-STR multiplex strategies to be an effective system for analyzing degraded DNA. We conclude that analysis by the current miniX-STR multiplex systems offers high effectiveness for personal identification from degraded DNA samples.
Prediction of critical heat flux in fuel assemblies using a CHF table method

Energy Technology Data Exchange (ETDEWEB)

Chun, Tae Hyun; Hwang, Dae Hyun; Bang, Je Geon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Baek, Won Pil; Chang, Soon Heung [Korea Advance Institute of Science and Technology, Taejon (Korea, Republic of)

1998-12-31

A CHF table method has been assessed in this study for rod bundle CHF predictions. At the conceptual design stage for a new reactor, a general critical heat flux (CHF) prediction method with a wide applicable range and reasonable accuracy is essential to the thermal-hydraulic design and safety analysis. In many aspects, a CHF table method (i.e., the use of a round tube CHF table with appropriate bundle correction factors) can be a promising way to fulfill this need. So the assessment of the CHF table method has been performed with the bundle CHF data relevant to pressurized water reactors (PWRs). For comparison purposes, W-3R and EPRI-1 were also applied to the same data base. Data analysis has been conducted with the subchannel code COBRA-IV-I. The CHF table method shows the best predictions based on the direct substitution method. Improvements of the bundle correction factors, especially for the spacer grid and cold wall effects, are desirable for better predictions. Though the present assessment is somewhat limited in both fuel geometries and operating conditions, the CHF table method clearly shows potential to be a general CHF predictor. 8 refs., 3 figs., 3 tabs. (Author)
Prediction of critical heat flux in fuel assemblies using a CHF table method

Energy Technology Data Exchange (ETDEWEB)

Chun, Tae Hyun; Hwang, Dae Hyun; Bang, Je Geon [Korea Atomic Energy Research Institute, Taejon (Korea, Republic of); Baek, Won Pil; Chang, Soon Heung [Korea Advance Institute of Science and Technology, Taejon (Korea, Republic of)

1997-12-31

A CHF table method has been assessed in this study for rod bundle CHF predictions. At the conceptual design stage for a new reactor, a general critical heat flux (CHF) prediction method with a wide applicable range and reasonable accuracy is essential to the thermal-hydraulic design and safety analysis. In many aspects, a CHF table method (i.e., the use of a round tube CHF table with appropriate bundle correction factors) can be a promising way to fulfill this need. So the assessment of the CHF table method has been performed with the bundle CHF data relevant to pressurized water reactors (PWRs). For comparison purposes, W-3R and EPRI-1 were also applied to the same data base. Data analysis has been conducted with the subchannel code COBRA-IV-I. The CHF table method shows the best predictions based on the direct substitution method. Improvements of the bundle correction factors, especially for the spacer grid and cold wall effects, are desirable for better predictions. Though the present assessment is somewhat limited in both fuel geometries and operating conditions, the CHF table method clearly shows potential to be a general CHF predictor. 8 refs., 3 figs., 3 tabs. (Author)
Short tandem repeat (STR) DNA markers are hypervariable and informative in Cannabis sativa: implications for forensic investigations.

Science.gov (United States)

Gilmore, Simon; Peakall, Rod; Robertson, James

2003-01-09

Short tandem repeat (STR) markers are the DNA marker of choice in forensic analysis of human DNA. Here we extend the application of STR markers to Cannabis sativa and demonstrate their potential for forensic investigations. Ninety-three individual cannabis plants, representing drug and fibre accessions of widespread origin were profiled with five STR makers. A total of 79 alleles were detected across the five loci. All but four individuals from a single drug-type accession had a unique multilocus genotype. An analysis of molecular variance (AMOVA) revealed significant genetic variation among accessions, with an average of 25% genetic differentiation. By contrast, only 6% genetic difference was detected between drug and fibre crop accessions and it was not possible to unequivocally assign plants as either drug or fibre type. However, our results suggest that drug strains may typically possess lower genetic diversity than fibre strains, which may ultimately provide a means of genetic delineation. Our findings demonstrate the promise of cannabis STR markers to provide information on: (1) agronomic type, (2) the geographical origin of drug seizures, and (3) evidence of conspiracy in production of clonally propagated drug crops.
"The devil's in the detail": Release of an expanded, enhanced and dynamically revised forensic STR Sequence Guide.

Science.gov (United States)

Phillips, C; Gettings, K Butler; King, J L; Ballard, D; Bodner, M; Borsuk, L; Parson, W

2018-05-01

The STR sequence template file published in 2016 as part of the considerations from the DNA Commission of the International Society for Forensic Genetics on minimal STR sequence nomenclature requirements, has been comprehensively revised and audited using the latest GRCh38 genome assembly. The list of forensic STRs characterized was expanded by including supplementary autosomal, X- and Y-chromosome microsatellites in less common use for routine DNA profiling, but some likely to be adopted in future massively parallel sequencing (MPS) STR panels. We outline several aspects of sequence alignment and annotation that required care and attention to detail when comparing sequences to GRCh37 and GRCh38 assemblies, as well as the necessary matching of MPS-based allele descriptions to previously established repeat region structures described in initial sequencing studies of the less well known forensic STRs. The revised sequence guide is now available in a dynamically updated FTP format from the STRidER website with a date-stamped change log to allow users to explore their own MPS data with the most up-to-date forensic STR sequence information compiled in a simple guide. Copyright © 2018 Elsevier B.V. All rights reserved.
Use of probability tables for propagating uncertainties in neutronics

International Nuclear Information System (INIS)

Coste-Delclaux, M.; Diop, C.M.; Lahaye, S.

2017-01-01

Highlights: • Moment-based probability table formalism is described. • Representation by probability tables of any uncertainty distribution is established. • Multiband equations for two kinds of uncertainty propagation problems are solved. • Numerical examples are provided and validated against Monte Carlo simulations. - Abstract: Probability tables are a generic tool that allows representing any random variable whose probability density function is known. In the field of nuclear reactor physics, this tool is currently used to represent the variation of cross-sections versus energy (neutron transport codes TRIPOLI4®, MCNP, APOLLO2, APOLLO3®, ECCO/ERANOS…). In the present article we show how we can propagate uncertainties, thanks to a probability table representation, through two simple physical problems: an eigenvalue problem (neutron multiplication factor) and a depletion problem.
The genomic sequence of Exiguobacterium chiriqhucha str. N139 reveals a species that thrives in cold waters and extreme environmental conditions

Directory of Open Access Journals (Sweden)

Ana Gutiérrez-Preciado

2017-04-01

Full Text Available We report the genome sequence of Exiguobacterium chiriqhucha str. N139, isolated from a high-altitude Andean lake. Comparative genomic analyses of the Exiguobacterium genomes available suggest that our strain belongs to the same species as the previously reported E. pavilionensis str. RW-2 and Exiguobacterium str. GIC 31. We describe this species and propose the chiriqhucha name to group them. ‘Chiri qhucha’ in Quechua means ‘cold lake’, which is a common origin of these three cosmopolitan Exiguobacteria. The 2,952,588-bp E. chiriqhucha str. N139 genome contains one chromosome and three megaplasmids. The genome analysis of the Andean strain suggests the presence of enzymes that confer E. chiriqhucha str. N139 the ability to grow under multiple environmental extreme conditions, including high concentrations of different metals, high ultraviolet B radiation, scavenging for phosphorous and coping with high salinity. Moreover, the regulation of its tryptophan biosynthesis suggests that novel pathways remain to be discovered, and that these pathways might be fundamental in the amino acid metabolism of the microbial community from Laguna Negra, Argentina.
SplitDist—Calculating Split-Distances for Sets of Trees

DEFF Research Database (Denmark)

Mailund, T

2004-01-01

We present a tool for comparing a set of input trees, calculating for each pair of trees the split-distances, i.e., the number of splits in one tree not present in the other.......We present a tool for comparing a set of input trees, calculating for each pair of trees the split-distances, i.e., the number of splits in one tree not present in the other....
Operating US power reactors

International Nuclear Information System (INIS)

Silver, E.G.

1988-01-01

This update, which appears regularly in each issue of Nuclear Safety, surveys the operations of those power reactors in the US which have been issued operating licenses. Table 1 shows the number of such reactors and their net capacities as of September 30, 1987, the end of the three-month period covered in this report. Table 2 lists the unit capacity and forced outage rate for each licensed reactor for each of the three months (July, August, and September 1987) covered in this report and the cumulative values of these parameters since the beginning of commercial operation. In addition to the tabular data, this article discusses other significant occurrences and developments that affected licensed US power reactors during this reporting period. Status changes at Braidwood Unit 1, Nine Mile Point 2, and Beaver Valley 2 are discussed. Other occurrences discussed are: retraining of control-room operators at Peach Bottom; a request for 25% power for Shoreham, problems at Fermi 2 which delayed the request to go to 75% power; the results of a safety study of the N Reactor at Hanford; a proposed merger of Pacific Gas and Electric with Sacramento Municipal Utility District which would result in the decommissioning of Rancho Seco; the ordered shutdown of Oyster Creek; a minor radioactivity release caused by a steam generator tube rupture at North Anna 1; and 13 fines levied by the NRC on reactor licensees
Stutter analysis of complex STR MPS data

DEFF Research Database (Denmark)

Vilsen, Søren B; Tvedebrink, Torben; Eriksen, Poul Svante

2018-01-01

Stutters are common and well documented artefacts of amplification of short tandem repeat (STR) regions when using polymerase chain reaction (PCR) occurring as strands one or more motifs shorter or longer than the parental allele. Understanding the mechanism and rate by which stutters are created...... is especially important when the samples contain small amounts of DNA or DNA from multiple contributors. It has been shown that there is a linear relationship between the longest uninterrupted stretch (LUS) and the stutter ratio. This holds if there is only a single type of stutter variant. However...
Genetic analysis of 20 autosomal STR loci in the Miao ethnic group from Yunnan Province, Southwest China.

Science.gov (United States)

Zhang, Xiufeng; Hu, Liping; Du, Lei; Nie, Aiting; Rao, Min; Pang, Jing Bo; Xiran, Zeng; Nie, Shengjie

2017-05-01

The genetic polymorphisms of 20 autosomal short tandem repeat (STR) loci included in the PowerPlex ® 21 kit were evaluated from 748 unrelated healthy individuals of the Miao ethnic minority living in the Yunnan province in southwestern China. All of the loci reached Hardy-Weinberg equilibrium. These loci were examined to determine allele frequencies and forensic statistical parameters. The genetic relationship between the Miao population and other Chinese populations were also estimated. The combined discrimination power and probability of excluding paternity of the 20 STR loci were 0.999 999 999 999 999 999 999 991 26 and 0.999 999 975, respectively. The results suggested that the 20 STR loci were highly polymorphic, which makes them suitable for forensic personal identification and paternity testing. Copyright © 2017 Elsevier B.V. All rights reserved.

Nuclear reactor safety system

International Nuclear Information System (INIS)

Ball, R.M.; Roberts, R.C.

1983-01-01

The invention provides a safety system for a nuclear reactor which uses a parallel combination of computer type look-up tables each of which receives data on a particular parameter (from transducers located in the reactor system) and each of which produces the functional counterpart of that particular parameter. The various functional counterparts are then added together to form a control signal for shutting down the reactor. The functional counterparts are developed by analysis of experimental thermal and hydraulic data, which are used to form expressions that define safe conditions
Compilation of reactor physics data of the year 1984, AVR reactor

International Nuclear Information System (INIS)

Werner, H.; Bergerfurth, A.; Thomas, F.; Geskes, B.

1985-12-01

The 'AVR reactor physics data' is a documentation published once a year, the data presented being obtained by a simulation of reactor operation using the AVR-80 numerical model. This model is constantly updated and improved in response to new results and developments in the field of reactor theory and thermohydraulics, and in response to theoretical or practical modifications of reactor operation or in the computer system. The large variety of measured data available in the AVR reactor simulation system also makes it an ideal testing system for verification of the computing programs presented in the compilation. A survey of the history of operations in 1984 and a short explanation of the computerized simulation methods are followed by tables and graphs that serve as a source of topical data for readers interested in the physics of high-temperature pebble-bed reactors. (orig./HP) [de
Compilation of reactor physics data of the year 1983, AVR reactor

International Nuclear Information System (INIS)

Werner, H.; Bergerfurth, A.; Thomas, F.; Geskes, B.

1985-06-01

The 'AVR reactor physics data' is a documentation published once a year, the data presented being obtained by a simulation of reactor operation using the AVR-80 numerical model. This model is constantly updated and improved in response to new results and developments in the field of reactor theory and thermohydraulics, and in response to theoretical or practical modifications of reactor operation or in the computer system. The large variety of measured data available in the AVR reactor simulation system also makes it an ideal testing system for verification of the computing programs presented in the compilation. A survey of the history of operations in 1983 and a short explanation of the computerized simulation methods are followed by tables and graphs that serve as a source of topical data for readers interested in the physics of high-temperature pebble-bed reactors. (orig./HP) [de
Haplotype and genetic relationship of 27 Y-STR loci in Han population of Chaoshan area of China

Directory of Open Access Journals (Sweden)

Qing-hua TIAN

2017-04-01

Full Text Available Objective 　To investigate the genetic polymorphisms of 27 Y-chromosomal short tandem repeats (Y-STR loci included in Yfiler® Plus kit in Han population of Chaoshan area, and explore the population genetic relationships and evaluate its application value on forensic medicine. Methods 　By detecting 795 unrelated Chaoshan Han males with Yfiler® Plus kit, haplotype frequencies and population genetics parameters of the 27 Y-STR loci were statistically analyzed and compared with available data of other populations from different races and regions for analyzing the genetic distance and clustering relation of Chaoshan Han population. Results 　Seven hundred and eighty-seven different haplotypes were observed in 795 unrelated male individuals, of which 779 haplotypes were unique, and 8 haplotypes occurred twice. The haplotype diversity (HD was 0.999975 with discriminative capacity (DC of 98.99%. The gene diversity (GD at the 27 Y-STR loci ranged from 0.3637(DYS391 to 0.9559(DYS385a/b. Comparing with Asian reference populations, the genetic distance (Rst between Chaoshan Han and Guangdong Han was the smallest (0.0036, while it was relatively larger between Chaoshan Han and Gansu Tibetan population (0.0935. The multi-dimensional scaling (MDS plot based on Rst values was similar to the results of clustering analysis. Conclusion 　Multiplex detection of the 27 Y-STR loci reveals a highly polymorphic genetic distribution in Chaoshan Han population, which demonstrates the important significance of Yfiler® Plus kit for establishing a Y-STR database, studying population genetics, and for good practice in forensic medicine. DOI: 10.11855/j.issn.0577-7402.2017.03.08
Developmental and internal validation of a novel 13 loci STR multiplex method for Cannabis sativa DNA profiling.

Science.gov (United States)

Houston, Rachel; Birck, Matthew; Hughes-Stamm, Sheree; Gangitano, David

2017-05-01

Marijuana (Cannabis sativa L.) is a plant cultivated and trafficked worldwide as a source of fiber (hemp), medicine, and intoxicant. The development of a validated method using molecular techniques such as short tandem repeats (STRs) could serve as an intelligence tool to link multiple cases by means of genetic individualization or association of cannabis samples. For this purpose, a 13 loci STR multiplex method was developed, optimized, and validated according to relevant ISFG and SWGDAM guidelines. The STR multiplex consists of 13 previously described C. sativa STR loci: ANUCS501, 9269, 4910, 5159, ANUCS305, 9043, B05, 1528, 3735, CS1, D02, C11, and H06. A sequenced allelic ladder consisting of 56 alleles was designed to accurately genotype 101 C. sativa samples from three seizures provided by a U.S. Customs and Border Protection crime lab. Using an optimal range of DNA (0.5-1.0ng), validation studies revealed well-balanced electropherograms (inter-locus balance range: 0.500-1.296), relatively balanced heterozygous peaks (mean peak height ratio of 0.83 across all loci) with minimal artifacts and stutter ratio (mean stutter of 0.021 across all loci). This multi-locus system is relatively sensitive (0.13ng of template DNA) with a combined power of discrimination of 1 in 55 million. The 13 STR panel was found to be species specific for C. sativa; however, non-specific peaks were produced with Humulus lupulus. The results of this research demonstrate the robustness and applicability of this 13 loci STR system for forensic DNA profiling of marijuana samples. Copyright © 2017 Elsevier B.V. All rights reserved.
Systems and methods for displaying data in split dimension levels

Science.gov (United States)

Stolte, Chris; Hanrahan, Patrick

2015-07-28

Systems and methods for displaying data in split dimension levels are disclosed. In some implementations, a method includes: at a computer, obtaining a dimensional hierarchy associated with a dataset, wherein the dimensional hierarchy includes at least one dimension and a sub-dimension of the at least one dimension; and populating information representing data included in the dataset into a visual table having a first axis and a second axis, wherein the first axis corresponds to the at least one dimension and the second axis corresponds to the sub-dimension of the at least one dimension.
Y-STR analysis on DNA mixture samples--results of a collaborative project of the ENFSI DNA Working Group

DEFF Research Database (Denmark)

Parson, Walther; Niederstätter, Harald; Lindinger, Alexandra

2008-01-01

The ENFSI (European Network of Forensic Science Institutes) DNA Working Group undertook a collaborative project on Y-STR typing of DNA mixture samples that were centrally prepared and thoroughly tested prior to the shipment. Four commercial Y-STR typing kits (Y-Filer, Applied Biosystems, Foster C...... a laboratory-specific optimization process is indicated to reach a comparable sensitivity for the analysis of minute amounts of DNA....
Bio-processing of copper from combined smelter dust and flotation concentrate: a comparative study on the stirred tank and airlift reactors.

Science.gov (United States)

Vakylabad, Ali Behrad; Schaffie, Mahin; Ranjbar, Mohammad; Manafi, Zahra; Darezereshki, Esmaeel

2012-11-30

To scrutinize the influence of the design and type of the bioreactors on the bioleaching efficiency, the bioleaching were evaluated in a batch airlift and a batch stirred tank bioreactors with mixed mesophilic and mixed moderately thermophilic bacteria. According to the results, maximum copper recoveries were achieved using the cultures in the stirred tank bioreactors. It is worth noting that the main phase of the flotation concentrate was chalcopyrite (as a primary sulphide), but the smelter dust mainly contained secondary copper sulphides such as Cu(2)S, CuS, and Cu(5)FeS(4).Under optimum conditions, copper dissolution from the combined flotation concentrate and smelter dust (as an environmental hazard) reached 94.50% in the STR, and 88.02% in the airlift reactor with moderately thermophilic, after 23 days. Also, copper extractions calculated for the bioleaching using mesophilic bacteria were 48.73% and 37.19% in the STR (stirred tank reactor) and the airlift bioreactor, respectively. In addition, the SEM/EDS, XRD, chemical, and mineralogical analyses and studies confirmed the above results. Copyright © 2012 Elsevier B.V. All rights reserved.
Overview moderator material for nuclear reactor components

International Nuclear Information System (INIS)

Mairing Manutu Pongtuluran; Hendra Prihatnadi

2009-01-01

In order for a reactor design is considered acceptable absolute technical requirement is fulfilled because the most important part of a reactor design. Safety considerations emphasis on the handling of radioactive substances emitted during the operation of a reactor and radioactive waste handling. Moderator material is a layer that interacts directly with neutrons split the nuclear fuel that will lead to changes in physical properties, nuclear properties, mechanical properties and chemical properties. Reviews moderator of this time is of the types of moderator is often used to meet the requirements as nuclear material. (author)
Y-STR frequency surveying method

DEFF Research Database (Denmark)

Willuweit, Sascha; Caliebe, Amke; Andersen, Mikkel Meyer

2011-01-01

Reasonable formalized methods to estimate the frequencies of DNA profiles generated from lineage markers have been proposed in the past years and were discussed in the forensic community. Recently, collections of population data on the frequencies of variations in Y chromosomal STR profiles have...... reached a new quality with the establishment of the comprehensive neatly quality-controlled reference database YHRD. Grounded on such unrivalled empirical material from hundreds of populations studies the core assumption of the Haplotype Frequency Surveying Method originally described 10 years ago can...... be tested and improved. Here we provide new approaches to calculate the parameters used in the frequency surveying method: a maximum likelihood estimation of the regression parameters (r1, r2, s1 and s2) and a revised Frequency Surveying framework with variable binning and a database preprocessing to take...
FvSTR1, a striatin orthologue in Fusarium virguliforme, is required for asexual development and virulence.

Science.gov (United States)

Islam, Kazi T; Bond, Jason P; Fakhoury, Ahmad M

2017-08-01

The soil-borne fungus Fusarium virguliforme causes sudden death syndrome (SDS), one of the most devastating diseases of soybean in North and South America. Despite the importance of SDS, a clear understanding of the fungal pathogenicity factors that affect the development of this disease is still lacking. We have identified FvSTR1, a F. virguliforme gene, which encodes a protein similar to a family of striatin proteins previously reported to regulate signalling pathways, cell differentiation, conidiation, sexual development, and virulence in filamentous fungi. Striatins are multi-domain proteins that serve as scaffolding units in the striatin-interacting phosphatase and kinase (STRIPAK) complex in fungi and animals. To address the function of a striatin homologue in F. virguliforme, FvSTR1 was disrupted and functionally characterized using a gene knock out strategy. The resulting Fvstr1 mutants were largely impaired in conidiation and pigmentation, and displayed defective conidia and conidiophore morphology compared to the wild-type and ectopic transformants. Greenhouse virulence assays revealed that the disruption of FvSTR1 resulted in complete loss of virulence in F. virguliforme. Microtome studies using fluorescence microscopy showed that the Fvstr1 mutants were defective in their ability to colonize the vascular system. The Fvstr1 mutants also showed a reduced transcript level of genes involved in asexual reproduction and in the production of secondary metabolites. These results suggest that FvSTR1 has a critical role in asexual development and virulence in F. virguliforme.
Allele frequency distribution for 21 autosomal STR loci in Nepal.

Science.gov (United States)

Kraaijenbrink, T; van Driem, G L; Opgenort, J R M L; Tuladhar, N M; de Knijff, P

2007-05-24

The allele frequency distributions of 21 autosomal loci contained in the AmpFlSTR Identifiler, the Powerplex 16 and the FFFL multiplex PCR kits, was studied in 953 unrelated individuals from Nepal. Several new alleles (i.e. not yet reported in the NIST Short Tandem Repeat DNA Internet DataBase [http://www.cstl.nist.gov/biotech/strbase/]) have been detected in the process.
Qualification of the calculational methods of the fluence in the pressurised water reactors. Improvement of the cross sections treatment by the probability table method

International Nuclear Information System (INIS)

Zheng, S.H.

1994-01-01

It is indispensable to know the fluence on the nuclear reactor pressure vessel. The cross sections and their treatment have an important rule to this problem. In this study, two ''benchmarks'' have been interpreted by the Monte Carlo transport program TRIPOLI to qualify the calculational method and the cross sections used in the calculations. For the treatment of the cross sections, the multigroup method is usually used but it exists some problems such as the difficulty to choose the weighting function and the necessity of a great number of energy to represent well the cross section's fluctuation. In this thesis, we propose a new method called ''Probability Table Method'' to treat the neutron cross sections. For the qualification, a program of the simulation of neutron transport by the Monte Carlo method in one dimension has been written; the comparison of multigroup's results and probability table's results shows the advantages of this new method. The probability table has also been introduced in the TRIPOLI program; the calculational results of the iron deep penetration benchmark has been improved by comparing with the experimental results. So it is interest to use this new method in the shielding and neutronic calculation. (author). 42 refs., 109 figs., 36 tabs
Safety of nuclear power reactors

International Nuclear Information System (INIS)

MacPherson, H.G.

1982-01-01

Safety is the major public issue to be resolved or accommodated if nuclear power is to have a future. Probabilistic Risk Analysis (PRA) of accidental releases of low-level radiation, the spread and activity of radiation in populated areas, and the impacts on public health from exposure evolved from the earlier Rasmussen Reactor Safety Study. Applications of the PRA technique have identified design peculiarities in specific reactors, thus increasing reactor safety and establishing a quide for evaluating reactor regulations. The Nuclear Regulatory Commission and reactor vendors must share with utilities the responsibility for reactor safety in the US and for providing reasonable assurance to the public. This entails persuasive public education and information that with safety a top priority, changes now being made in light water reactor hardware and operations will be adequate. 17 references, 2 figures, 2 tables
A new autosomal STR nineplex for canine identification and parentage testing

DEFF Research Database (Denmark)

van Asch, Barbara; Alves, Cíntia; Gusmão, Leonor

2009-01-01

-breed origin. Co-dominant inheritance of STR alleles was investigated in 101 father, mother and son trios. Expected heterozygosity values vary between 0.5648 for REN214L11 and 0.9050 for C38. The high level of genetic diversity observed for most markers provides this multiplex with a very high discriminating...
OSU Reactor Sharing Program FY 1995 annual report

International Nuclear Information System (INIS)

Higginbotham, J.F.

1996-10-01

This is the annual report of the activities supported under the Oregon State University Reactor Sharing Program, award number DE-FG06-NE38137. The beginning date for the award was September, 30, 1995 and the end date was September 29, 1996. Work conducted under this award is internally administered at the Radiation Center through a project tasking system. This allows for excellent quality control for the work which is performed from the point of initial contact, through the reactor application, project report generation and financial accounting. For the current fiscal year, FY95, the total cost of the reactor sharing program, including Radiation Center contributions, was $66,323.20 of which $40,000.00 was supplied by the DOE Reactor Sharing Program. The details of individual project costs is given in Table 1. The work performed for the individual projects are described in the brief work descriptions given in Table 2
A comprehensive Y-STR portrait of Yousafzai's population.

Science.gov (United States)

Tabassum, Sadia; Ilyas, Muhammad; Ullah, Inam; Israr, Muhammad; Ahmad, Habib

2017-09-01

In the current study, 17 Y-Chromosomal short tandem repeats (Y-STRs) included in theAmpFlSTR Y-Filer amplification kit (Applied Biosystems, Foster City, USA) were investigated in 146 unrelated Yousafzai males residing in the Khyber Pakhtunkhwa Province of Pakistan. A total of 94 (89.52%) unique haplotypes were observed. Discrimination capacity was 71.92%. Haplotype diversity ranged from 0.354 (DYS456) to 0.663 (DYS458). Both Rst pairwise analysis and multidimensional scaling plot showed that the genetic structure of the Yousafzais is significantly different from neighbouring populations.
Use of the LUS in sequence allele designations to facilitate probabilistic genotyping of NGS-based STR typing results.

Science.gov (United States)

Just, Rebecca S; Irwin, Jodi A

2018-05-01

Some of the expected advantages of next generation sequencing (NGS) for short tandem repeat (STR) typing include enhanced mixture detection and genotype resolution via sequence variation among non-homologous alleles of the same length. However, at the same time that NGS methods for forensic DNA typing have advanced in recent years, many caseworking laboratories have implemented or are transitioning to probabilistic genotyping to assist the interpretation of complex autosomal STR typing results. Current probabilistic software programs are designed for length-based data, and were not intended to accommodate sequence strings as the product input. Yet to leverage the benefits of NGS for enhanced genotyping and mixture deconvolution, the sequence variation among same-length products must be utilized in some form. Here, we propose use of the longest uninterrupted stretch (LUS) in allele designations as a simple method to represent sequence variation within the STR repeat regions and facilitate - in the nearterm - probabilistic interpretation of NGS-based typing results. An examination of published population data indicated that a reference LUS region is straightforward to define for most autosomal STR loci, and that using repeat unit plus LUS length as the allele designator can represent greater than 80% of the alleles detected by sequencing. A proof of concept study performed using a freely available probabilistic software demonstrated that the LUS length can be used in allele designations when a program does not require alleles to be integers, and that utilizing sequence information improves interpretation of both single-source and mixed contributor STR typing results as compared to using repeat unit information alone. The LUS concept for allele designation maintains the repeat-based allele nomenclature that will permit backward compatibility to extant STR databases, and the LUS lengths themselves will be concordant regardless of the NGS assay or analysis tools
Nuclear detectors for in-core power-reactors

International Nuclear Information System (INIS)

Duchene, Jean; Verdant, Robert.

1979-12-01

Nuclear reactor control is commonly obtained through neutronic measurements, ex-core and in-core. In large size reactors flux instabilities may take place. For a good monitoring of them, local in-core power measurements become particularly useful. This paper intends to review the questions about neutronic sensors with could be used in-core. A historical account about methods is given first, from early power reactors with brief description of each system. Sensors presently used (ionization fission chambers, self-powered detectors) are then considered and also those which could be developped such as gamma thermometers. Their physical basis, main characteristics and operation modes are detailed. Preliminary tests and works needed for an extension of their life-time are indicated. As an example present irradiation tests at the CEA are then proposed. Two tables will help comparing the characteristics of each type in terms of its precise purpose: fuel monitoring, safety or power control. Finally a table summarizes the kind of sensors mounted on working power reactors and another one is a review of characteristics for some detectors from obtainable commercial sheets [fr
Physics and kinetics of TRIGA reactor

International Nuclear Information System (INIS)

Boeck, H.; Villa, M.

2007-01-01

This training module is written as an introduction to reactor physics for reactor operators. It assumes the reader has a basic, fundamental knowledge of physics, materials and mathematics. The objective is to provide enough reactor theory knowledge to safely operate a typical research reactor. At this level, it does not necessarily provide enough information to evaluate the safety aspects of experiment or non-standard operation reviews. The material provides a survey of basic reactor physics and kinetics of TRIGA type reactors. Subjects such as the multiplication factor, reactivity, temperature coefficients, poisoning, delayed neutrons and criticality are discussed in such a manner that even someone not familiar with reactor physics and kinetics can easily follow. A minimum of equations are used and several tables and graphs illustrate the text. (author)

Bio-processing of copper from combined smelter dust and flotation concentrate: A comparative study on the stirred tank and airlift reactors

Energy Technology Data Exchange (ETDEWEB)

Vakylabad, Ali Behrad, E-mail: alibehzad86@yahoo.co.uk [Department of Mining Engineering, Shahid Bahonar University, Kerman (Iran, Islamic Republic of); Engineers of Nano and Bio Advanced Sciences Company (ENBASCo.), ATIC, Mohaghegh University (Iran, Islamic Republic of); Schaffie, Mahin [Department of Chemical Engineering, Shahid Bahonar University of Kerman, Kerman (Iran, Islamic Republic of); Mineral Industries Research Centre (MIRC), Shahid Bahonar University of Kerman, Kerman (Iran, Islamic Republic of); Ranjbar, Mohammad [Department of Mining Engineering, Shahid Bahonar University, Kerman (Iran, Islamic Republic of); Mineral Industries Research Centre (MIRC), Shahid Bahonar University of Kerman, Kerman (Iran, Islamic Republic of); Manafi, Zahra [Sarcheshmeh Copper Complex, National Iranian Copper Industry Company (Iran, Islamic Republic of); Darezereshki, Esmaeel [Mineral Industries Research Centre (MIRC), Shahid Bahonar University of Kerman, Kerman (Iran, Islamic Republic of); Energy and Environmental Engineering Research Center (EERC), Shahid Bahonar University of Kerman, Kerman (Iran, Islamic Republic of)

2012-11-30

Highlights: Black-Right-Pointing-Pointer Flotation concentrate and smelter dust were sampled and combined. Black-Right-Pointing-Pointer Copper bioleaching from the combined was investigated. Black-Right-Pointing-Pointer Two bio-reactors were investigated and optimized: stirred and airlift. Black-Right-Pointing-Pointer STRs had better technical conditions and situations for bacterial leaching. - Abstract: To scrutinize the influence of the design and type of the bioreactors on the bioleaching efficiency, the bioleaching were evaluated in a batch airlift and a batch stirred tank bioreactors with mixed mesophilic and mixed moderately thermophilic bacteria. According to the results, maximum copper recoveries were achieved using the cultures in the stirred tank bioreactors. It is worth noting that the main phase of the flotation concentrate was chalcopyrite (as a primary sulphide), but the smelter dust mainly contained secondary copper sulphides such as Cu{sub 2}S, CuS, and Cu{sub 5}FeS{sub 4}.Under optimum conditions, copper dissolution from the combined flotation concentrate and smelter dust (as an environmental hazard) reached 94.50% in the STR, and 88.02% in the airlift reactor with moderately thermophilic, after 23 days. Also, copper extractions calculated for the bioleaching using mesophilic bacteria were 48.73% and 37.19% in the STR (stirred tank reactor) and the airlift bioreactor, respectively. In addition, the SEM/EDS, XRD, chemical, and mineralogical analyses and studies confirmed the above results.
Bio-processing of copper from combined smelter dust and flotation concentrate: A comparative study on the stirred tank and airlift reactors

International Nuclear Information System (INIS)

Vakylabad, Ali Behrad; Schaffie, Mahin; Ranjbar, Mohammad; Manafi, Zahra; Darezereshki, Esmaeel

2012-01-01

Highlights: ► Flotation concentrate and smelter dust were sampled and combined. ► Copper bioleaching from the combined was investigated. ► Two bio-reactors were investigated and optimized: stirred and airlift. ► STRs had better technical conditions and situations for bacterial leaching. - Abstract: To scrutinize the influence of the design and type of the bioreactors on the bioleaching efficiency, the bioleaching were evaluated in a batch airlift and a batch stirred tank bioreactors with mixed mesophilic and mixed moderately thermophilic bacteria. According to the results, maximum copper recoveries were achieved using the cultures in the stirred tank bioreactors. It is worth noting that the main phase of the flotation concentrate was chalcopyrite (as a primary sulphide), but the smelter dust mainly contained secondary copper sulphides such as Cu 2 S, CuS, and Cu 5 FeS 4 .Under optimum conditions, copper dissolution from the combined flotation concentrate and smelter dust (as an environmental hazard) reached 94.50% in the STR, and 88.02% in the airlift reactor with moderately thermophilic, after 23 days. Also, copper extractions calculated for the bioleaching using mesophilic bacteria were 48.73% and 37.19% in the STR (stirred tank reactor) and the airlift bioreactor, respectively. In addition, the SEM/EDS, XRD, chemical, and mineralogical analyses and studies confirmed the above results.
Algebraic techniques for diagonalization of a split quaternion matrix in split quaternionic mechanics

International Nuclear Information System (INIS)

Jiang, Tongsong; Jiang, Ziwu; Zhang, Zhaozhong

2015-01-01

In the study of the relation between complexified classical and non-Hermitian quantum mechanics, physicists found that there are links to quaternionic and split quaternionic mechanics, and this leads to the possibility of employing algebraic techniques of split quaternions to tackle some problems in complexified classical and quantum mechanics. This paper, by means of real representation of a split quaternion matrix, studies the problem of diagonalization of a split quaternion matrix and gives algebraic techniques for diagonalization of split quaternion matrices in split quaternionic mechanics
Genetic Variation of 25 Y-Chromosomal and 15 Autosomal STR Loci in the Han Chinese Population of Liaoning Province, Northeast China.

Directory of Open Access Journals (Sweden)

Jun Yao

Full Text Available In the present study, we investigated the genetic characteristics of 25 Y-chromosomal and 15 autosomal short tandem repeat (STR loci in 305 unrelated Han Chinese male individuals from Liaoning Province using AmpFISTR® Yfiler® Plus and IdentifilerTM PCR amplification kits. Population comparison was performed between Liaoning Han population and different ethnic groups to better understand the genetic background of the Liaoning Han population. For Y-STR loci, the overall haplotype diversity was 0.9997 and the discrimination capacity was 0.9607. Gene diversity values ranged from 0.4525 (DYS391 to 0.9617 (DYS385. Rst and two multi-dimensional scaling plots showed that minor differences were observed when the Liaoning Han population was compared to the Jilin Han Chinese, Beijing Han Chinese, Liaoning Manchu, Liaoning Mongolian, Liaoning Xibe, Shandong Han Chinese, Jiangsu Han Chinese, Anhui Han Chinese, Guizhou Han Chinese and Liaoning Hui populations; by contrast, major differences were observed when the Shanxi Han Chinese, Yunnan Bai, Jiangxi Han Chinese, Guangdong Han Chinese, Liaoning Korean, Hunan Tujia, Guangxi Zhuang, Gansu Tibetan, Xishuangbanna Dai, South Korean, Japanese and Hunan Miao populations. For autosomal STR loci, DP ranged from 0.9621 (D2S1338 to 0.8177 (TPOX, with PE distributing from 0.7521 (D18S51 to 0.2988 (TH01. A population comparison was performed and no statistically significant differences were detected at any STR loci between Liaoning Han, China Dong, and Shaanxi Han populations. The results showed that the 25 Y-STR and 15 autosomal STR loci in the Liaoning Han population were valuable for forensic applications and human genetics, and Liaoning Han was an independent endogenous ethnicity with a unique subpopulation structure.
Genetic Variation of 25 Y-Chromosomal and 15 Autosomal STR Loci in the Han Chinese Population of Liaoning Province, Northeast China.

Science.gov (United States)

Yao, Jun; Wang, Bao-Jie

2016-01-01

In the present study, we investigated the genetic characteristics of 25 Y-chromosomal and 15 autosomal short tandem repeat (STR) loci in 305 unrelated Han Chinese male individuals from Liaoning Province using AmpFISTR® Yfiler® Plus and IdentifilerTM PCR amplification kits. Population comparison was performed between Liaoning Han population and different ethnic groups to better understand the genetic background of the Liaoning Han population. For Y-STR loci, the overall haplotype diversity was 0.9997 and the discrimination capacity was 0.9607. Gene diversity values ranged from 0.4525 (DYS391) to 0.9617 (DYS385). Rst and two multi-dimensional scaling plots showed that minor differences were observed when the Liaoning Han population was compared to the Jilin Han Chinese, Beijing Han Chinese, Liaoning Manchu, Liaoning Mongolian, Liaoning Xibe, Shandong Han Chinese, Jiangsu Han Chinese, Anhui Han Chinese, Guizhou Han Chinese and Liaoning Hui populations; by contrast, major differences were observed when the Shanxi Han Chinese, Yunnan Bai, Jiangxi Han Chinese, Guangdong Han Chinese, Liaoning Korean, Hunan Tujia, Guangxi Zhuang, Gansu Tibetan, Xishuangbanna Dai, South Korean, Japanese and Hunan Miao populations. For autosomal STR loci, DP ranged from 0.9621 (D2S1338) to 0.8177 (TPOX), with PE distributing from 0.7521 (D18S51) to 0.2988 (TH01). A population comparison was performed and no statistically significant differences were detected at any STR loci between Liaoning Han, China Dong, and Shaanxi Han populations. The results showed that the 25 Y-STR and 15 autosomal STR loci in the Liaoning Han population were valuable for forensic applications and human genetics, and Liaoning Han was an independent endogenous ethnicity with a unique subpopulation structure.
Device for manufacturing methane or synthetic gas from materials containing carbon using a nuclear reactor

International Nuclear Information System (INIS)

Jaeger, W.

1984-01-01

This invention concerns a device for manufacturing methane or synthetic gas from materials containing carbon using a nuclear reactor, where part of the carbon is gasified with hydration and the remaining carbon is converted to synthetic gas by adding steam. This synthetic gas consists mainly of H 2 , CO, CO 2 and CH 4 and can be converted to methane in so-called methanising using a nickel catalyst. The hydrogen gasifier is situated in the first of two helium circuits of a high temperature reactor, and the splitting furnace is situated in the second helium circuit, where part of the methane produced is split into hydrogen at high temperature, which is used for the hydrating splitting of another part of the material containing carbon. (orig./RB) [de
Dye-Sensitized Photocatalytic Water Splitting and Sacrificial Hydrogen Generation: Current Status and Future Prospects

Directory of Open Access Journals (Sweden)

Pankaj Chowdhury

2017-05-01

Full Text Available Today, global warming and green energy are important topics of discussion for every intellectual gathering all over the world. The only sustainable solution to these problems is the use of solar energy and storing it as hydrogen fuel. Photocatalytic and photo-electrochemical water splitting and sacrificial hydrogen generation show a promise for future energy generation from renewable water and sunlight. This article mainly reviews the current research progress on photocatalytic and photo-electrochemical systems focusing on dye-sensitized overall water splitting and sacrificial hydrogen generation. An overview of significant parameters including dyes, sacrificial agents, modified photocatalysts and co-catalysts are provided. Also, the significance of statistical analysis as an effective tool for a systematic investigation of the effects of different factors and their interactions are explained. Finally, different photocatalytic reactor configurations that are currently in use for water splitting application in laboratory and large scale are discussed.
Toward visible light response: Overall water splitting using heterogeneous photocatalysts

KAUST Repository

Takanabe, Kazuhiro

2011-01-01

Extensive energy conversion of solar energy can only be achieved by large-scale collection of solar flux. The technology that satisfies this requirement must be as simple as possible to reduce capital cost. Overall water splitting by powder-form photocatalysts directly produces a mixture of H 2 and O2 (chemical energy) in a single reactor, which does not require any complicated parabolic mirrors and electronic devices. Because of its simplicity and low capital cost, it has tremendous potential to become the major technology of solar energy conversion. Development of highly efficient photocatalysts is desired. This review addresses why visible light responsive photocatalysts are essential to be developed. The state of the art for the photocatalysts for overall water splitting is briefly described. Moreover, various fundamental aspects for developing efficient photocatalysts, such as particle size of photocatalysts, cocatalysts, and reaction kinetics are discussed. Copyright © 2011 De Gruyter.
Reactor shutdown: nuclear power plant performance

International Nuclear Information System (INIS)

Anon.

1982-01-01

The article essentially looks at the performance of nine of Sweden's nuclear reactors. A table lists the percentage of time for the first three quarters of 1981 that the reactors were operating, and the number of hours out of service for planned or other reasons. In particular, one station - Ringhals 3 - was out of action because of a damaged tube in the associated steam generator. The same fault occurred with another reactor - Ringhals 4 - before this was brought into service. The reasons for the failure and its importance are briefly discussed. (G.P.)
[Analysis of genetic polymorphisms and mutations of 20 frequently used STR loci among ethnic Hans from Henan].

Science.gov (United States)

Wang, Hongdan; Kang, Bing; Gao, Yue; Huo, Xiaodong; Li, Tao; Guo, Qiannan; Zhu, Bofeng; Liao, Shixiu

2017-04-10

To study the genetic polymorphisms and mutations of 20 frequently used autosomal microsatellites among ethnic Hans from Henan. Peripheral blood samples of 2604 individuals were collected. DNA was amplified and genotyped using a PowerPlex(TM) 21 system. The frequencies, forensic parameters and mutation rates of the 20 short tandem repeat (STR) loci were analyzed. A total of 323 alleles were found in this population and the allelic frequencies have ranged from 0.0003 to 0.5144. Except for D3S1358, TH01 and TPOX, mutations have been found in all of the remaining 17 STR loci, which totaled 47, with mutation rates ranging from 0 to 3.46 × 10 -3 . The 20 STR loci selected by the PowerPlex(TM) 21 system are highly polymorphic among ethnic Hans from Henan, and may be of great value in forensic and human population studies. As no similar study has been carried out previously, above results may be of great value for individual discrimination and paternal testing.
Polarization Insensitivity in Double-Split Ring and Triple-Split Ring Terahertz Resonators

International Nuclear Information System (INIS)

Wu Qian-Nan; Lan Feng; Tang Xiao-Pin; Yang Zi-Qiang

2015-01-01

A modified double-split ring resonator and a modified triple-split ring resonator, which offer polarization-insensitive performance, are investigated, designed and fabricated. By displacing the two gaps of the conventional double-split ring resonator away from the center, the second resonant frequency for the 0° polarized wave and the resonant frequency for the 90° polarized wave become increasingly close to each other until they are finally identical. Theoretical and experimental results show that the modified double-split ring resonator and the modified triple-split ring resonator are insensitive to different polarized waves and show strong resonant frequency dips near 433 and 444 GHz, respectively. The results of this work suggest new opportunities for the investigation and design of polarization-dependent terahertz devices based on split ring resonators. (paper)
Production of polygalacturonases by Aspergillus oryzae in stirred tank and internal- and external-loop airlift reactors.

Science.gov (United States)

Fontana, Roselei Claudete; da Silveira, Maurício Moura

2012-11-01

The production of endo- and exo-polygalacturonase (PG) by Aspergillus oryzae was assessed in stirred tank reactors (STRs), internal-loop airlift reactors (ILARs) and external-loop airlift reactors (ELARs). For STR production, we compared culture media formulated with either pectin (WBE) or partially hydrolyzed pectin. The highest enzyme activities were obtained in medium that contained 50% pectin in hydrolyzed form (WBE5). PG production in the three reactor types was compared for WBE5 and low salt WBE medium, with additional salts added at 48, 60 and 72h (WBES). The ELARs performed better than the ILARs in WBES medium where the exo-PG was the same concentration as for STRs and the endo-PG was 20% lower. These results indicate that PG production is higher under experimental conditions that result in higher cell growth with minimum pH values less than 3.0. Copyright © 2012 Elsevier Ltd. All rights reserved.
Solar Metal Sulfate-Ammonia Based Thermochemical Water Splitting Cycle for Hydrogen Production

Science.gov (United States)

Huang, Cunping (Inventor); T-Raissi, Ali (Inventor); Muradov, Nazim (Inventor)

2014-01-01

Two classes of hybrid/thermochemical water splitting processes for the production of hydrogen and oxygen have been proposed based on (1) metal sulfate-ammonia cycles (2) metal pyrosulfate-ammonia cycles. Methods and systems for a metal sulfate MSO.sub.4--NH3 cycle for producing H2 and O2 from a closed system including feeding an aqueous (NH3)(4)SO3 solution into a photoctalytic reactor to oxidize the aqueous (NH3)(4)SO3 into aqueous (NH3)(2)SO4 and reduce water to hydrogen, mixing the resulting aqueous (NH3)(2)SO4 with metal oxide (e.g. ZnO) to form a slurry, heating the slurry of aqueous (NH4)(2)SO4 and ZnO(s) in the low temperature reactor to produce a gaseous mixture of NH3 and H2O and solid ZnSO4(s), heating solid ZnSO4 at a high temperature reactor to produce a gaseous mixture of SO2 and O2 and solid product ZnO, mixing the gaseous mixture of SO2 and O2 with an NH3 and H2O stream in an absorber to form aqueous (NH4)(2)SO3 solution and separate O2 for aqueous solution, recycling the resultant solution back to the photoreactor and sending ZnO to mix with aqueous (NH4)(2)SO4 solution to close the water splitting cycle wherein gaseous H2 and O2 are the only products output from the closed ZnSO4--NH3 cycle.
Bad splits in bilateral sagittal split osteotomy: systematic review of fracture patterns.

Science.gov (United States)

Steenen, S A; Becking, A G

2016-07-01

An unfavourable and unanticipated pattern of the mandibular sagittal split osteotomy is generally referred to as a 'bad split'. Few restorative techniques to manage the situation have been described. In this article, a classification of reported bad split pattern types is proposed and appropriate salvage procedures to manage the different types of undesired fracture are presented. A systematic review was undertaken, yielding a total of 33 studies published between 1971 and 2015. These reported a total of 458 cases of bad splits among 19,527 sagittal ramus osteotomies in 10,271 patients. The total reported incidence of bad split was 2.3% of sagittal splits. The most frequently encountered were buccal plate fractures of the proximal segment (types 1A-F) and lingual fractures of the distal segment (types 2A and 2B). Coronoid fractures (type 3) and condylar neck fractures (type 4) have seldom been reported. The various types of bad split may require different salvage approaches. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Gas phase photocatalytic water splitting in silicon based µ-reactors

DEFF Research Database (Denmark)

Dionigi, Fabio; Vesborg, Peter Christian Kjærgaard

is discussed in the beginning of this thesis followed by an introduction to the basics of photocatalysis. The experimental setup used in this study and the silicon based μ-reactor technology is described afterwards. Almost the entire work presented in the thesis has been done loading the catalysts in these μ...
Second-order splitting schemes for a class of reactive systems

International Nuclear Information System (INIS)

Ren Zhuyin; Pope, Stephen B.

2008-01-01

We consider the numerical time integration of a class of reaction-transport systems that are described by a set of ordinary differential equations for primary variables. In the governing equations, the terms involved may require the knowledge of secondary variables, which are functions of the primary variables. Specifically, we consider the case where, given the primary variables, the evaluation of the secondary variables is computationally expensive. To solve this class of reaction-transport equations, we develop and demonstrate several computationally efficient splitting schemes, wherein the portions of the governing equations containing chemical reaction terms are separated from those parts containing the transport terms. A computationally efficient solution to the transport sub-step is achieved through the use of linearization or predictor-corrector methods. The splitting schemes are applied to the reactive flow in a continuously stirred tank reactor (CSTR) with the Davis-Skodjie reaction model, to the CO+H 2 oxidation in a CSTR with detailed chemical kinetics, and to a reaction-diffusion system with an extension of the Oregonator model of the Belousov-Zhabotinsky reaction. As demonstrated in the test problems, the proposed splitting schemes, which yield efficient solutions to the transport sub-step, achieve second-order accuracy in time
Application of Emergency Action Levels from Potential Release at Research Reactor HANARO

International Nuclear Information System (INIS)

Kim, Jongsoo; Lee, Goan Yub; Lee, Hae Choi; Kim, Bong Suk

2014-01-01

Execution of the protective action promptly is possible that Emergency Action Levels (EALs) must be established for a radiological release from nuclear facility. The EALs for electric power reactor are already developed and applied to recognize an emergency situation rapidly. Recently the IAEA published the safety report including the EALs for research reactor. This paper describes the EALs to apply for a potential release pathway at the research reactor HANARO. The results of table 1 and 2 will be higher than actual because the weather condition in real situation is difference. However, the EALs applying the potential stack release, ground release and site can be useful for research reactor HANARO making the emergency declaration. The EALs at the site boundary of the table 3 can be applied to protect the off-site public
KAMCCO, a reactor physics Monte Carlo neutron transport code

International Nuclear Information System (INIS)

Arnecke, G.; Borgwaldt, H.; Brandl, V.; Lalovic, M.

1976-06-01

KAMCCO is a 3-dimensional reactor Monte Carlo code for fast neutron physics problems. Two options are available for the solution of 1) the inhomogeneous time-dependent neutron transport equation (census time scheme), and 2) the homogeneous static neutron transport equation (generation cycle scheme). The user defines the desired output, e.g. estimates of reaction rates or neutron flux integrated over specified volumes in phase space and time intervals. Such primary quantities can be arbitrarily combined, also ratios of these quantities can be estimated with their errors. The Monte Carlo techniques are mostly analogue (exceptions: Importance sampling for collision processes, ELP/MELP, Russian roulette and splitting). Estimates are obtained from the collision and track length estimators. Elastic scattering takes into account first order anisotropy in the center of mass system. Inelastic scattering is processed via the evaporation model or via the excitation of discrete levels. For the calculation of cross sections, the energy is treated as a continuous variable. They are computed by a) linear interpolation, b) from optionally Doppler broadened single level Breit-Wigner resonances or c) from probability tables (in the region of statistically distributed resonances). (orig.) [de
US Department of Energy 1992--1993 Reactor Sharing Program

International Nuclear Information System (INIS)

Vernetson, W.G.

1994-04-01

The University of Florida Training Reactor serves as a host institution to support various educational institutions which are located primarily within the state of Florida. All users and uses were carefully screened to assure the usage was for educational institutions eligible for participation in the Reactor Sharing Program. Three tables are included that provide basic information about the 1992--1993 program and utilization of the reactor facilities by user institutions
Analysis of 12 X-STR loci in the population of south Croatia.

Science.gov (United States)

Mršić, Gordan; Ozretić, Petar; Crnjac, Josip; Merkaš, Siniša; Račić, Ivana; Rožić, Sara; Sukser, Viktorija; Popović, Maja; Korolija, Marina

2017-02-01

The aim of the study was to assess forensic pertinence of 12 short tandem repeats (STRs) on X-chromosome in south Croatia population. Investigator ® Argus X-12 kit was used to co-amplify 12 STR loci belonging to four linkage groups (LGs) on X-chromosome in 99 male and 98 female DNA samples of unrelated donors. PCR products were analyzed by capillary electrophoresis. Population genetic and forensic parameters were calculated by the Arlequin and POPTREE2 software, and an on-line tool available at ChrX-STR.org. Hardy-Weinberg equilibrium was confirmed for all X-STR markers in female samples. Biallelic patterns at DXS10079 locus were detected in four male samples. Polymorphism information content for the most (DXS10135) and the least (DXS8378) informative markers was 0.9212 and 0.6347, respectively. In both male and female samples, combined power of discrimination exceeded 0.999999999. As confirmed by linkage disequilibrium test, significant association of marker pair DXS10074-DXS10079 (P = 0.0004) within LG2 and marker pair DXS10101-DXS10103 (P = 0.0003) within LG3 was found only in male samples. Number of observed haplotypes in our sample pool amounted 3.01, 7.53, 5 and 3.25% of the number of possible haplotypes for LG1, LG2, LG3 and LG4, respectively. According to haplotype diversity value of 0.9981, LG1 was the most informative. In comparison of south Croatia with 26 world populations, pair-wise [Formula: see text] values increase in parallel with geographical distance. Overall statistical assessment confirmed suitability of Investigator ® Argus X-12 kit for forensic casework in both identification and familial testing in the population of south Croatia.

Technical note: developmental validation of a novel 6-dye typing system with 36 Y-STR loci.

Science.gov (United States)

Du, Weian; Feng, Peipei; Huang, Hongyan; Wu, Weibin; Zhang, Lei; Guo, Yulin; Liu, Changhui; Liu, Hong; Liu, Chao; Chen, Ling

2018-05-30

Y-chromosomal short tandem repeats (Y-STRs) have proven to be very useful in investigating sexual assault cases and in paternity lineage differentiation. However, currently available commercial Y-STR multiplex amplification systems bear the limitations in the identification of related males from the same paternal lineage due to there being an insufficient number of loci in any single amplification kit. The aim of this study was to establish and validate a novel 6-dye, 36-plex Y-STR multiplex amplification system that incorporated all of the loci present in the Yfiler™ Plus kit (DYS19, DYS385a/b, DYF387S1, DYS389I/II, DYS390, DYS391, DYS392, DYS393, DYS437, DYS438, DYS439, DYS448, DYS449, DYS456, DYS458, DYS460, DYS481, DYS518, DYS533, DYS570, DYS576, DYS627, DYS635, Y_GATA_H4) as well as a further nine highly polymorphic Y-STR loci (DYS388, DYS444, DYS447, DYS522, DYS527a/b, DYS549, DYS596, DYS643). The novel system was optimized and validated by a series of studies that tested the effect of different PCR-based conditions as well as the species specificity, sensitivity, stability, stutter precision, suitability for use on DNA mixtures, reproducibility, and parallel testing of the system, as well as its performance on casework samples and population analysis, according to the SWGDAM developmental validation guidelines. A total of 246 haplotypes were found for the 36 Y-STRs among 247 Guangdong Han unrelated males. Collectively, the results demonstrate that the developed 36-plex Y-STR system is sensitive, robust, reliable, and highly informative for use in forensic genetics.
The stand prototype of minimum power NRE reactor

International Nuclear Information System (INIS)

Belogurov, A.I.; Grigorenko, L.N.; Mamontov, Yu.I.; Rachuk, V.S.; Stukalov, A.I.; Konyukhov, G.V.

1995-01-01

For ensuring of full-scale development of nuclear rocket engine (NRE) reactor was created stand prototype (reactor IRGIT?) The main differences of its are as follows: 1) Fasteners of technologies channels contents fuel assemblies in bottom are worked out the split. It is provides possibility a distance channels change without disassembly of reactor stand prototype from stand; 2) Cooling of the vessels, the moderator, the reflector and the barrel actuate is carried out by hydrogen; 3) The lower bottom modified for organization the hydrogen efflux in the form a reactor jet; 4) Radiation defence is introduced as part of stand prototype for ensuring of serviceability of stand accessories and tests routine service; 5) Each technology channels is provided of critical nozzle; 6) Control, regulation and defence of reactor has being carried out on stand system
Population data for 12 Y-chromosome STR loci in a sample from Honduras.

Science.gov (United States)

Matamoros, Mireya; Yurrebaso, Iñaki; Gusmão, Leonor; García, Oscar

2009-09-01

Haplotype, allele frequencies and population data of 12 Y-chromosome STR loci DYS19, DYS385, DYS389I, DYS389II, DYS390, DYS391, DYS392, DYS393, DYS437, DYS438 and DYS439 were determined from a sample of 128 unrelated male individuals from Honduras, Central America. A total of 112 haplotypes were identified by the 12 Y-STR loci of which 98 were unique. The haplotype diversity (98.99%) and the proportion of different haplotypes (87.50%) were estimated. Genetic distances were calculated between Honduras and other populations from Southern and Central America, Europe and Africa. The analysis of a Multi Dimensional Scaling (MDS) plot, based on pairwise R(ST) genetic distances, allowed to conclude that Honduras is highly differentiated from the African samples (0.343Honduras showed a lower genetic distance to the European cluster (composed by European and South American general population samples from Brazil, Argentina, Colombia and Venezuela) than to the Central American cluster (Mexico and El Salvador).
Paroxysmal nocturnal hemoglobinuria first described in 1882 by Paul Strübing: an example of cooperation between clinical and basic research.

Science.gov (United States)

Wilmanns, J C

1982-12-01

The 100th anniversary of the first description of paroxysmal nocturnal hemoglobinuria by Paul Strübing presents an opportunity to analyze the premises valid for the description of this disease in addition to an attempt at an extensive pathophysiological analysis. Strübing's two papers of 1882 were way ahead of his time, when pathophysiology was just at its beginning, particularly considering the fact that neither Marchiafava, who is still commonly credited wit the first description of this disease (1911) and its recognition as a clinical entity (1928), nor his student Micheli analyzed the PNH syndrome in pathophysiological terms as carefully as Strübing. Both of the former names were given to the disease, which is generally referred to as the Marchiafava-Micheli Anemia. William Crosby, who in 1951 in a historical review of PHN first pointed out the pioneering achievement of Strübing, suggested that it was mainly due to the lack of the right "intellectual climate" at the time that so little attention was paid to his work. Still another important aspect of the early history of PNH will be described in the present paper. The analysis of Strübing's publications leads to the conclusion that he was only able to make his important contribution to medical science because he not only had the appropriate clinical setting but also the scientific backup of the famous physiologist Leonhard Landois and his institute at the University of Greifswald, which is an excellent example of scientific progress through cooperation between a clinician and a research scientist.
Market Structure and Stock Splits

OpenAIRE

David Michayluk; Paul Kofman

2001-01-01

Enhanced liquidity is one possible motivation for stock splits but empirical research frequently documents declines in liquidity following stock splits. Despite almost thirty years of inquiry, little is known about all the changes in a stock's trading activity following a stock split. We examine how liquidity measures change around more than 2,500 stock splits and find a pervasive decline in most measures. Large stock splits exhibit a more severe liquidity decline than small stock splits, esp...
Splitting method for computing coupled hydrodynamic and structural response

International Nuclear Information System (INIS)

Ash, J.E.

1977-01-01

A numerical method is developed for application to unsteady fluid dynamics problems, in particular to the mechanics following a sudden release of high energy. Solution of the initial compressible flow phase provides input to a power-series method for the incompressible fluid motions. The system is split into spatial and time domains leading to the convergent computation of a sequence of elliptic equations. Two sample problems are solved, the first involving an underwater explosion and the second the response of a nuclear reactor containment shell structure to a hypothetical core accident. The solutions are correlated with experimental data
A global analysis of Y-chromosomal haplotype diversity for 23 STR loci

DEFF Research Database (Denmark)

Purps, Josephine; Siegert, Sabine; Willuweit, Sascha

2014-01-01

In a worldwide collaborative effort, 19,630 Y-chromosomes were sampled from 129 different populations in 51 countries. These chromosomes were typed for 23 short-tandem repeat (STR) loci (DYS19, DYS389I, DYS389II, DYS390, DYS391, DYS392, DYS393, DYS385ab, DYS437, DYS438, DYS439, DYS448, DYS456, DY...
Design and validation of a highly discriminatory 10-locus Y-chromosome STR multiplex system

KAUST Repository

D'Amato, Marí a Eugenia; Bajic, Vladimir B.; Davison, Sean P.

2011-01-01

The Y-chromosome STRs (short tandem repeat) markers are routinely utilized in the resolution of forensic casework related to sexual assault. For this, the forensic community has adopted a set of eleven (core) Y-STR that is incorporated in all
Compilation of reactor-physical data of the AVR experimental reactor for 1982

International Nuclear Information System (INIS)

Werner, H.; Wawrzik, U.; Grotkamp, T.; Buettgen, I.

1983-12-01

Since the end of 1981 the calculation model AVR-80 has been taken as a basis for compiling reactor-physical data of the AVR experimental reactor. A brief outline of the operation history of 1982 is given, including the beginning of a large-scale experiment dealing with change-over from high enriched uranium to low enriched uranium. Calculations relative to spectral shift, diffusion, temperature, burnup, and recirculation of the fuel elements are described in brief. The essential results of neutron-physical and thermodynamic calculations and the characteristical data of the various types of fuel used are shown in tables and illustrations. (RF) [de
Database of operation history for fuel elements in swimming pool research reactor 300

International Nuclear Information System (INIS)

Chen Wei; Jiang Yanwei

2006-01-01

It is to cooperate with the original data preparation of ORIGEN2 that the database of operation history in SPRR -300 is built with Microsoft Access. Only one table is used to record the history of the reactor after simplifications. Table of every assembly records only its load history, which will not exceed 20. Tables in the database are linked by the field of Load ID. It is confirmed that errors occurred during statistic and/or input can be classified into two kinds while inquiries are built for them to check errors automatically. Inquiry is also built for every assembly, while data of any assembly are collected from the table of total reactor history according to the given table of assembly load history. After those data are exported to pure text files, a program named Operation Data Processing Program is developed to treat them into operation history data needed by ORIGEN2 calculation. (authors)
Inner and inter population structure construction of Chinese Jiangsu Han population based on Y23 STR system.

Directory of Open Access Journals (Sweden)

Huipin Wang

Full Text Available In this study, we analyzed the genetic polymorphisms of 23 Y-STR loci from PowerPlex® Y23 system in 916 unrelated healthy male individuals from Chinese Jiangsu Han, and observed 912 different haplotypes including 908 unique haplotypes and 4 duplicate haplotypes. The haplotype diversity reached 0.99999 and the discrimination capacity and match probability were 0.9956 and 0.0011, respectively. The gene diversity values ranged from 0.3942 at DYS438 to 0.9607 at DYS385a/b. Population differentiation within 10 Jiangsu Han subpopulations were evaluated by RST values and visualized in Neighbor-Joining trees and Multi-Dimensional Scaling plots as well as population relationships between the Jiangsu Han population and other 18 Eastern Asian populations. Such results indicated that the 23 Y-STR loci were highly polymorphic in Jiangsu Han population and played crucial roles in forensic application as well as population genetics. For the first time, we reported the genetic diversity of male lineages in Jiangsu Han population at a high-resolution level of 23 Y-STR set and consequently contributed to familial searching, offender tracking, and anthropology analysis of Jiangsu Han population.
Inner and inter population structure construction of Chinese Jiangsu Han population based on Y23 STR system

Science.gov (United States)

Yang, Chun; Zhang, Jianqiu

2017-01-01

In this study, we analyzed the genetic polymorphisms of 23 Y-STR loci from PowerPlex® Y23 system in 916 unrelated healthy male individuals from Chinese Jiangsu Han, and observed 912 different haplotypes including 908 unique haplotypes and 4 duplicate haplotypes. The haplotype diversity reached 0.99999 and the discrimination capacity and match probability were 0.9956 and 0.0011, respectively. The gene diversity values ranged from 0.3942 at DYS438 to 0.9607 at DYS385a/b. Population differentiation within 10 Jiangsu Han subpopulations were evaluated by RST values and visualized in Neighbor-Joining trees and Multi-Dimensional Scaling plots as well as population relationships between the Jiangsu Han population and other 18 Eastern Asian populations. Such results indicated that the 23 Y-STR loci were highly polymorphic in Jiangsu Han population and played crucial roles in forensic application as well as population genetics. For the first time, we reported the genetic diversity of male lineages in Jiangsu Han population at a high-resolution level of 23 Y-STR set and consequently contributed to familial searching, offender tracking, and anthropology analysis of Jiangsu Han population. PMID:28704439
On the definition of a DEMO (demonstration) reactor

International Nuclear Information System (INIS)

Cole, H.C.; Challender, R.S.

1987-01-01

The paper is an appendix to a study of the reactor relevance of the NET design concept. The latter study examines whether the technologies and design principles proposed for NET can be directly extrapolated to a demonstration (DEMO) reactor. The authors have suggested a definition of a DEMO, and listed what they considered to be the most important implications of this definition. A table of parameters is included comparing published DEMO's with typical commercial reactor and 'pre-DEMO' studies. (U.K.)
Nuclear reactor built, being built, or planned

International Nuclear Information System (INIS)

1991-06-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1990. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington headquarters and field offices of DOE, from the US Nuclear Regulatory Commission, from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations, from US and foreign embassies, and from foreign governmental nuclear departments. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly
Population genetic data for 15 STR loci (Identifiler kit) in Bolivia.

Science.gov (United States)

Rocabado, Omar; Taboada, Patricia; Inda, Francisco Javier; Yurrebaso, Inaki; García, Oscar

2009-11-01

Allele frequencies for 15 STR autosomal loci (D8S1179, D21S11, D7S820, CSF1PO, D3S1358, TH01, D13S317, D16S539, D2S1338, D19S433, VWA, TPOX, D18S51, D5S818 and FGA) were obtained from a sample of 200 unrelated individuals from Bolivia, South America.
Population genetic data for 15 STR loci (Identifiler kit) in Honduras.

Science.gov (United States)

Matamoros, Mireya; Pinto, Yessica; Inda, Francisco Javier; García, Oscar

2008-09-01

Allele frequencies for 15 STR autosomal loci (D8S1179, D21S11, D7S820, CSF1PO, D3S1358, TH01, D13S317, D16S539, D2S1338, D19S433, VWA, TPOX, D18S51, D5S818 and FGA) were obtained from a sample of 198 unrelated individuals from Honduras, Central America.
Coupling the modular helium reactor to hydrogen production processes

International Nuclear Information System (INIS)

Richards, M.B.; Shenoy, A.S.; Schultz, K.R.

2004-01-01

Steam reforming of natural gas (methane) currently produces the bulk of hydrogen gas used in the world today. Because this process depletes natural gas resources and generates the greenhouse gas carbon dioxide as a by-product, there is a growing interest in using process heat and/or electricity generated by nuclear reactors to generate hydrogen by splitting water. Process heat from a high temperature nuclear reactor can be used directly to drive a set of chemical reactions, with the net result of splitting water into hydrogen and oxygen. For example, process heat at temperatures in the range 850 deg C to 950 deg C can drive the sulphur-iodine (S-I) thermochemical process to produce hydrogen with high efficiency. The S-I process produces highly pure hydrogen and oxygen, with formation, decomposition, regeneration, and recycle of the intermediate chemical reagents. Electricity can also 1)e used directly to split water, using conventional, low-temperature electrolysis (LTE). Hydrogen can also be produced with hybrid processes that use both process heat and electricity to generate hydrogen. An example of a hybrid process is high-temperature electrolysis (HTE), in which process heat is used to generate steam, which is then supplied to an electrolyzer to generate hydrogen. This process is of interest because the efficiency of electrolysis increases with temperature. Because of its high temperature capability, advanced stage of development relative to other high-temperature reactor concepts, and passive-safety features, the modular helium reactor (MHR) is well suited for producing hydrogen using nuclear energy. In this paper we investigate the coupling of the MHR to the S-I process, LTE, and HTE. These concepts are referred to as the H2-MHR. (author)
Genetic analysis of two STR loci (VWA and TPOX in the Iranian province of Khuzestan

Directory of Open Access Journals (Sweden)

Ali Mohammad Foroughmand

2014-08-01

Conclusion: The examined STR loci in this study have proven a relatively high genetic variation in the Iranian population. The data could be used for construction of a forensic genetic database for the Iranian population.
Estimating inventory thresholds for nuclear facilities using DOE STD-1027-92 Attachment 1 Table A.1 ''Thresholds for Radionuclides''

International Nuclear Information System (INIS)

Price, D.; Hildum, J.S.; Williams, A.C.

1997-01-01

It has recently been reports that Table A.1 of Attachment 1 of DOE STD-1027-92 is being improperly used to determine the Category 3 inventory threshold values for non-reactor nuclear facilities. The concern of this paper is that Safety Analysts and Facility Managers at the Lawrence Livermore National Laboratory (LLNL), as well as at other locations in the DOE Complex, are improperly using the entries in Table A.1. It is noted at this point that the common use of this table is to establish the lower thresholds for both Categories 2 and 3 non-reactor nuclear facilities by considering inventory quantities, as opposed to a postulated accident scenario. This paper will provide insight regarding this error and will show that the error is most likely non-conservative in nature
Genetic polymorphisms, forensic efficiency and phylogenetic analysis of 15 autosomal STR loci in the Kazak population of Ili Kazak Autonomous Prefecture, northwestern China.

Science.gov (United States)

Feng, Chunmei; Wang, Xin; Wang, Xiaolong; Yu, Hao; Zhang, Guohua

2018-03-01

We investigated the frequencies of 15 autosomal STR loci in the Kazak population of the Ili Kazak Autonomous Prefecture with the aim of expanding the available population information in human genetic databases and for forensic DNA analysis. Genetic polymorphisms of 15 autosomal short tandem repeat (STR) loci were analysed in 456 individuals of the Kazak population from Ili Kazakh Autonomous Prefecture, northwestern China. A total of 173 alleles at 15 autosomal STR loci were found; the allele frequencies ranged from 0.5022-0.0011. The combined power of discrimination and exclusion statistics for the 15 STR loci were 0.999 999 999 85 and 0.999 998 800 65, respectively. In addition, phylogenetic analysis involving the Ili Uygur population and other relevant populations was carried out. A neighbour-joining tree and multidimensional scaling plot were generated based on Nei's standard genetic distance. Results of the population comparison indicated that the Ili Uygur population was most closely related genetically to the Uygur populations from other regions in China. These findings are consistent with the historical and geographic backgrounds of these populations.

Indian programme on molten salt cooled nuclear reactors

International Nuclear Information System (INIS)

DuIera, I.V.; Vijayan, P.K.; Sinha, R.K.

2013-01-01

Bhabha Atomic Research Centre (BARC) is developing a 600 MWth pebble bed high temperature reactor, cooled by natural circulation of molten fluoride salts and is capable of supplying process heat at 1000 ℃ to facilitate hydrogen production by splitting water. BARC has also initiated studies for a reactor concept in which salts of molten fluoride fuel and coolant in fluid form, flows through the reactor core of graphite moderator, resulting in nuclear fission within the molten salt. For thorium fuel cycle, this concept is very attractive, since the fuel can be re-processed on-line, enabling it to be an efficient neutron breeder. (author)
Latvijas strādājošo jauniešu attieksme pret naudu

OpenAIRE

Stigeviča, Inga

2010-01-01

Ar naudu šobrīd nākas saskarties ikvienam Latvijas iedzīvotājam, jo bez naudas cilvēks nav spējīgs pilnvērtīgi eksistēt. Tādā gadījumā arī katram indivīdam ir izveidojusies noteikta attieksme pret naudu, kas spējīga izpausties noteiktās darbībās un nozīmes. Autore savā bakalaura darbā vēlas saprast, kāda ir tieši Latvijas strādājošo jauniešu attieksme pret savu nopelnīto naudu un naudas fenomenu kopumā. Par pētījuma objektu tika izvēlēti strādājošie jaunieši Latvijā, jo publiski pieejamu pētī...
Decommissioning of the Neuherberg Research Reactor (FRN)

International Nuclear Information System (INIS)

Demmeler, M.; Rau, G.; Strube, D.

1982-01-01

The Neuherberg Research Reactor is of type TRIGA MARK III with 1 MW steady state power and pulsable up to 2000 MW. During more than ten years of operation 12000 MWh and 6000 reactor pulses had been performed. In spite of its good technical condition and of permanent safe operation without any failures, the decommissioning of the Neuherberg research reactor was decided by the GSF board of directors to save costs for maintaining and personnel. As the mode of decommissioning the safe enclosure was chosen which means that the fuel elements will be transferred back to the USA. All other radioactive reactor components will be enclosed in the reactor block. Procedures for licensing of the decommissioning, dismantling procedures and time tables are presented
RELAP5-3D Code for Supercritical-Pressure Light-Water-Cooled Reactors

Energy Technology Data Exchange (ETDEWEB)

Riemke, Richard Allan; Davis, Cliff Bybee; Schultz, Richard Raphael

2003-04-01

The RELAP5-3D computer program has been improved for analysis of supercritical-pressure, light-water-cooled reactors. Several code modifications were implemented to correct code execution failures. Changes were made to the steam table generation, steam table interpolation, metastable states, interfacial heat transfer coefficients, and transport properties (viscosity and thermal conductivity). The code modifications now allow the code to run slow transients above the critical pressure as well as blowdown transients (modified Edwards pipe and modified existing pressurized water reactor model) that pass near the critical point.
Neural network modeling of drying of rice in BAU-STR dryer

Science.gov (United States)

Alam, Md. Ashraful; Saha, Chayan Kumer; Alam, Md. Monjurul; Ashraf, Md. Ali; Bala, Bilash Kanti; Harvey, Jagger

2018-05-01

The experimental performance and artificial neural network modeling of rice drying in BAU-STR dryer is presented in this paper. The dryer consists of a biomass stove as a heat source, a perforated inner bin and a perforated outer bin with annular space for grains, and a blower (1 hp) to supply heated air. The dryer capacity was 500 kg of freshly harvested rice. Twenty experimental runs were conducted to investigate the experimental performance of the dryer for drying of rice. An independent multilayer neural network approach was used to predict the performance of the BAU-STR dryer for drying of rice. Ten sets of experimental data were used for training using back propagation algorithm and another ten sets of data were used for testing the artificial neural network model. The prediction of the performance of the dryer was found to be excellent after it was adequately trained. The statistical analysis showed that the errors (MSE and RMSE) were within and acceptable range of ±5% with a coefficient of determination (R2) of 99%. The model can be used to predict the potential of the dryer for different locations, and can also be used in a predictive optimal control algorithm.
Feiing og salting i Strømsås-tunnelen mars 2004: innledende analyse

OpenAIRE

Aldrin, Magne

2004-01-01

I mars 2004 blei det gjennomført forsøk med vasking og salting i Strømsåstunnelen, med sikte på å redusere konsentrasjonen av svevestøv. Samtidig blei det gjort målinger av PM10, meteorologi og trafikkvolum.
Analysis of 16 autosomal STR loci in Uyghur and Kazakh populations from Xinjiang, China

DEFF Research Database (Denmark)

Simayijiang, Halimurat; Pereira, Vania; Børsting, Claus

2017-01-01

from Hardy-Weinberg Equilibrium in any of the two populations. The forensic parameters indicated that the kit is suitable for personal identification, paternity testing, and complex kinship analysis in Uyghur and Kazakh populations. Allele frequency data for the STR loci were compared with other...
Nuclear reactors built, being built, or planned, 1988

International Nuclear Information System (INIS)

1989-08-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1988. The Office of Scientific and Technical Information, US Department of Energy, gathers this information annually from Washington Headquarters and field offices of DOE, from the US Nuclear Regulatory Commission, from the US reactor manufacturers who are the principal nuclear contractors for foreign reactor locations, from US and foreign embassies, and from foreign governmental nuclear departments. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables. Section 2 includes nuclear reactors that are operating, being built, or planned. Section 3 includes reactors that have been shut down permanently or dismantled
Fetal gender determination through Y-STR analysis of maternal plasma during the third trimester of pregnancy

Directory of Open Access Journals (Sweden)

Hanaa M.H. Aal-Hamdan

2015-01-01

Conclusion: It is recommended to use Y-STR profiling as an alternative technique for fetal gender determination during the third trimester of pregnancy, in addition to its significance in forensic casework.
Splitting methods for split feasibility problems with application to Dantzig selectors

International Nuclear Information System (INIS)

He, Hongjin; Xu, Hong-Kun

2017-01-01

The split feasibility problem (SFP), which refers to the task of finding a point that belongs to a given nonempty, closed and convex set, and whose image under a bounded linear operator belongs to another given nonempty, closed and convex set, has promising applicability in modeling a wide range of inverse problems. Motivated by the increasingly data-driven regularization in the areas of signal/image processing and statistical learning, in this paper, we study the regularized split feasibility problem (RSFP), which provides a unified model for treating many real-world problems. By exploiting the split nature of the RSFP, we shall gainfully employ several efficient splitting methods to solve the model under consideration. A remarkable advantage of our methods lies in their easier subproblems in the sense that the resulting subproblems have closed-form representations or can be efficiently solved up to a high precision. As an interesting application, we apply the proposed algorithms for finding Dantzig selectors, in addition to demonstrating the effectiveness of the splitting methods through some computational results on synthetic and real medical data sets. (paper)
Split-coil-system SULTAN

International Nuclear Information System (INIS)

Vecsey, G.

1992-08-01

The high field superconductor test facility SULTAN started operation successfully in May 1992. Originally designed for testing full scale conductors for the large magnets of the next generation fusion reactors, the SULTAN facility installed at PSI (Switzerland) was designed as a common venture of three European Laboratories: ENEA (Italy), ECN (Netherlands) and PSI, and built by ENEA and PSI in the framework of the Euratom Fusion Technology Program. Presently the largest facility in the world, with its superconducting split coil system generating 11 Tesla in a 0.6 m bore, it is ready now for testing superconductor samples with currents up to 50 kA at variable cooling conditions. Similar tests can be arranged also for other applications. SULTAN is offered by the European Community as a contribution to the worldwide cooperation for the next step of fusion reactor development ITER. First measurements on conductor developed by CEA (Cadarache) are now in progress. Others like those of ENEA and CERN will follow. For 1993, a test of an Italian 12 TZ model coil for fusion application is planned. SULTAN is a worldwide unique facility marking the competitive presence of Swiss technology in the field of applied superconductivity research. Based on development and design of PSI, the high field Nb 3 Sn superconductors and coils were fabricated at the works of Kabelwerke Brugg and ABB, numerous Swiss companies contributed to the success of this international effort. Financing of the Swiss contribution of SULTAN was made available by NEFF, BEW, BBW, PSI and EURATOM. (author) figs., tabs., 20 refs
Coded Splitting Tree Protocols

DEFF Research Database (Denmark)

Sørensen, Jesper Hemming; Stefanovic, Cedomir; Popovski, Petar

2013-01-01

This paper presents a novel approach to multiple access control called coded splitting tree protocol. The approach builds on the known tree splitting protocols, code structure and successive interference cancellation (SIC). Several instances of the tree splitting protocol are initiated, each...... instance is terminated prematurely and subsequently iterated. The combined set of leaves from all the tree instances can then be viewed as a graph code, which is decodable using belief propagation. The main design problem is determining the order of splitting, which enables successful decoding as early...
Allele frequencies of 18 autosomal STR loci in the Uyghur population living in Kashgar Prefecture, Northwest China.

Science.gov (United States)

Zhang, Jian; Li, Zhenghui; Mo, Xiaoting; Ma, Wenhua; Zhang, Hantao; Lin, Ziqing; Ye, Jian

2018-03-10

There is currently no large population data-based data set in Kashgar Prefecture Uyghur. The allele frequencies of 18 autosomal short tandem repeat (STR) loci included in the DNATyper™ 19 kit were evaluated in 2600 Uyghur individuals living in Kashgar Prefecture, Northwest China. The values of combined power of discrimination (CPD) and combined probability of exclusion (CPE) of all 18 autosomal STR loci were 0.99999999999999999998235 and 0.99999998670, respectively. Phylogenetic analyses revealed that the Uyghur population has a closer relationship with the Xinjiang-Kazakh, Inner Mongolia-Mongolian, and other three Uyghur populations. In addition, our results are consistent with the hypothesis that Uyghur population is an admixture of Eastern Asian and European populations.
Short tandem repeat (STR based genetic diversity and relationship of indigenous Niger cattle

Directory of Open Access Journals (Sweden)

M. Grema

2017-11-01

Full Text Available The diversity of cattle in Niger is predominantly represented by three indigenous breeds: Zebu Arabe, Zebu Bororo and Kuri. This study aimed at characterizing the genetic diversity and relationship of Niger cattle breeds using short tandem repeat (STR marker variations. A total of 105 cattle from all three breeds were genotyped at 27 STR loci. High levels of allelic and gene diversity were observed with an overall mean of 8.7 and 0.724 respectively. The mean inbreeding estimate within breeds was found to be moderate with 0.024, 0.043 and 0.044 in Zebu Arabe, Zebu Bororo and Kuri cattle respectively. The global F statistics showed low genetic differentiation among Niger cattle with about 2.6 % of total variation being attributed to between-breed differences. Neighbor-joining tree derived from pairwise allele sharing distance revealed Zebu Arabe and Kuri clustering together while Zebu Bororo appeared to be relatively distinct from the other two breeds. High levels of admixture were evident from the distribution of pairwise inter-individual allele sharing distances that showed individuals across populations being more related than individuals within populations. Individuals were assigned to their respective source populations based on STR genotypes, and the percent correct assignment of Zebu Bororo (87.5 to 93.8 % was consistently higher than Zebu Arabe (59.3 to 70.4 % and Kuri (80.0 to 83.3 % cattle. The qualitative and quantitative tests for mutation drift equilibrium revealed absence of genetic bottleneck events in Niger cattle in the recent past. High genetic diversity and poor genetic structure among indigenous cattle breeds of Niger might be due to historic zebu–taurine admixture and ongoing breeding practices in the region. The results of the present study are expected to help in formulating effective strategies for conservation and genetic improvement of indigenous Niger cattle breeds.
Null alleles and sequence variations at primer binding sites of STR loci within multiplex typing systems.

Science.gov (United States)

Yao, Yining; Yang, Qinrui; Shao, Chengchen; Liu, Baonian; Zhou, Yuxiang; Xu, Hongmei; Zhou, Yueqin; Tang, Qiqun; Xie, Jianhui

2018-01-01

Rare variants are widely observed in human genome and sequence variations at primer binding sites might impair the process of PCR amplification resulting in dropouts of alleles, named as null alleles. In this study, 5 cases from routine paternity testing using PowerPlex ® 21 System for STR genotyping were considered to harbor null alleles at TH01, FGA, D5S818, D8S1179, and D16S539, respectively. The dropout of alleles was confirmed by using alternative commercial kits AGCU Expressmarker 22 PCR amplification kit and AmpFℓSTR ® . Identifiler ® Plus Kit, and sequencing results revealed a single base variation at the primer binding site of each STR locus. Results from the collection of previous reports show that null alleles at D5S818 were frequently observed in population detected by two PowerPlex ® typing systems and null alleles at D19S433 were mostly observed in Japanese population detected by two AmpFℓSTR™ typing systems. Furthermore, the most popular mutation type appeared the transition from C to T with G to A, which might have a potential relationship with DNA methylation. Altogether, these results can provide helpful information in forensic practice to the elimination of genotyping discrepancy and the development of primer sets. Copyright © 2017 Elsevier B.V. All rights reserved.
Hydrogen generation using the modular helium reactor

International Nuclear Information System (INIS)

Richards, M.; Shenoy, A.

2004-01-01

Process heat from a high-temperature nuclear reactor can be used to drive a set of chemical reactions, with the net result of splitting water into hydrogen and oxygen. For example, process heat at temperatures in the range 850 deg.C to 950 deg.C can drive the sulfur-iodine (SI) thermochemical process to produce hydrogen with high efficiency. Electricity can also be used to split water, using conventional, low-temperature electrolysis. An example of a hybrid process is high-temperature electrolysis (HTE), in which process heat is used to generate steam, which is then supplied to an electrolyser to generate hydrogen. In this paper we investigate the coupling of the Modular Helium Reactor (MHR) to the SI process and HTE. These concepts are referred to as the H2-MHR. Optimization of the MHR core design to produce higher coolant outlet temperatures is also discussed. The use of fixed orifices to control the flow distribution is a promising design solution for increasing the coolant outlet temperature without increasing peak fuel temperatures significantly
An unusual occurrence of repeated single allele variation on Y-STR locus DYS458

Directory of Open Access Journals (Sweden)

Pankaj Shrivastava

2016-09-01

Full Text Available Six brothers were accused of gagging and raping a woman. A single male Y-STR profile was obtained from vaginal smear swab and clothes of the victim, which did not match with the DNA profile of the accused brothers. As a reference point, the blood sample of their father (aged 87 years was also analyzed with the same kit. The Y-STR haplotype of all six brothers was found to be the same as that of their father except at locus DYS458. At this locus, while the eldest, second and fourth siblings share allele 18 with their father, a loss of one repeat (allele 17 instead of 18 is observed in the third son while fifth and sixth siblings have allele 19 representing a gain of one repeat. Thus, two changes viz. a gain (twice and loss of one repeat at this locus in one generation is both interesting and unusual.
Genetic distribution of 15 autosomal STR markers in the Punjabi population of Pakistan.

Science.gov (United States)

Shan, Muhammad Adnan; Hussain, Manzoor; Shafique, Muhammad; Shahzad, Muhammad; Perveen, Rukhsana; Idrees, Muhammad

2016-11-01

Genetic diversity of 15 autosomal short tandem repeat (STR) loci was evaluated in 713 unrelated individual samples of a Punjabi population of Pakistan. These loci were scrutinized to establish allelic frequencies and statistical parameters of forensic and paternity interests. A total of 165 alleles were observed with the corresponding allele frequencies ranging from 0.001 to 0.446. D2S1338 was found as the most informative locus while TPOX (0.611) was the least discriminating locus. The combined power of discrimination (CPD), the combined probability of exclusion (CPE), and cumulative probability of matching (CPM) were found equaled to 0.999999999999999998606227424808, 0.999995777557989, and 1.37543 × 10-18, respectively. All the loci followed the Hardy-Weinberg equilibrium after the Bonferroni correction (p < 0.0033) except one locus D3S1358. The study revealed that these STR loci are highly polymorphic, suitable for forensic and parentage analyses. In comparison to different populations (Asians and non-Asians), significant differences were recorded for these loci.
The Danish STR sequence database: duplicate typing of 363 Danes with the ForenSeq™ DNA Signature Prep Kit.

Science.gov (United States)

Hussing, C; Bytyci, R; Huber, C; Morling, N; Børsting, C

2018-05-24

Some STR loci have internal sequence variations, which are not revealed by the standard STR typing methods used in forensic genetics (PCR and fragment length analysis by capillary electrophoresis (CE)). Typing of STRs with next-generation sequencing (NGS) uncovers the sequence variation in the repeat region and in the flanking regions. In this study, 363 Danish individuals were typed for 56 STRs (26 autosomal STRs, 24 Y-STRs, and 6 X-STRs) using the ForenSeq™ DNA Signature Prep Kit to establish a Danish STR sequence database. Increased allelic diversity was observed in 34 STRs by the PCR-NGS assay. The largest increases were found in DYS389II and D12S391, where the numbers of sequenced alleles were around four times larger than the numbers of alleles determined by repeat length alone. Thirteen SNPs and one InDel were identified in the flanking regions of 12 STRs. Furthermore, 36 single positions and five longer stretches in the STR flanking regions were found to have dubious genotyping quality. The combined match probability of the 26 autosomal STRs was 10,000 times larger using the PCR-NGS assay than by using PCR-CE. The typical paternity indices for trios and duos were 500 and 100 times larger, respectively, than those obtained with PCR-CE. The assay also amplified 94 SNPs selected for human identification. Eleven of these loci were not in Hardy-Weinberg equilibrium in the Danish population, most likely because the minimum threshold for allele calling (30 reads) in the ForenSeq™ Universal Analysis Software was too low and frequent allele dropouts were not detected.
Genetic polymorphism of 21 non-CODIS STR loci in Chengdu Han population and its interpopulation analysis between 25 populations in China.

Science.gov (United States)

Li, Ye; Li, Hepei; He, Guanglin; Liang, Weibo; Luo, Haibo; Liao, Miao; Zhang, Ji; Yan, Jing; Li, Yingbi; Hou, Yiping; Wu, Jin

2018-03-01

AGCU 21+1 STR kit contains 21 non-combined DNA index system (non-CODIS) short tandem repeats (STR) loci and a sex-determining locus amelogenin. In this study, we evaluated the genetic diversity and forensically relevant population statistics of 21 non-CODIS loci in 210 Chinese Han individuals from Chengdu city, Sichuan province, Southwest China. No significant deviations from Hardy-Weinberg equilibrium were observed within the 21 non-CODIS STR loci. The combined power of discrimination (CPD) and combined power of exclusion (CPE) were 0.99999999999999999994278, 0.999999355 respectively. To reveal interpopulation differentiations of mainland population of China, a neighbor-joining (N-J) phylogenetic tree was constructed based on Nei's genetic distances among Chengdu Han and 25 published populations. The phylogenetic analyses indicated that Chengdu Han population keeps a close genetic relationship with other Han populations. Copyright © 2017. Published by Elsevier B.V.

Investigation and evaluation of the cause about the loss of split pin which was set to pipe support system of the primary cooling system of Monju

International Nuclear Information System (INIS)

Ichikawa, Shoichi; Kawanago, Sho; Nishio, Ryuichi; Wakimoto, Fumitsugu; Fujimura, Tomofumi; Kobayashi, Takanori; Sakamoto, Tsutomu

2015-07-01

The loss of the retaining split pins (four pieces) for clevis pin was confirmed at the inspection of the pipe supports in the Monju prototype fast-breeder reactor (hereinafter referred to Monju) in May, 2014. The split pins (two pieces) of ROD RESTRAINT and CONSTANT HANGER were fallen off. The split pins (two pieces) of MECHANICAL SNUBBER were broken at both ends of them. As a result of investigation, a dimple pattern was observed in a fracture surface of broken split pin. This observation result showed that fracture morphology is ductile fracture. A reproduction test, whether split pin was broken by loading the external force to the clevis pin, also gave the same fracture morphology. As the result of all cause investigation, the reason of the broken split pins is that the split pins were loaded shearing stress by the external force loaded to the clevis pin axial direction. The result of the cause investigation and a recurrence prevention measure of this trouble was reported. (author)
Shutdown channels and fitted interlocks in atomic reactors

International Nuclear Information System (INIS)

Furet, J.; Landauer, C.

1968-01-01

This catalogue consists of tables (one per reactor) giving the following information: number and type of detectors, range of the shutdown channels, nature of the associated electronics, thresholds setting off the alarms, fitted interlocks. These cards have been drawn up with a view to an examination of the reactors safety by the 'Reactor Safety Sub-Commission', they take into account the latest decisions. The reactors involved in this review are: Azur, Cabri, Castor-Pollux, Cesar-Marius-2, Edf-2, EL3, EL4, Eole, G1, G2-G3, Harmonie, Isis, Masurca, Melusine, Minerve, Osiris, Pegase, Peggy, PAT, Rapsodie, SENA, Siloe, Siloette, Triton-Nereide, and Ulysse. (authors) [fr
Evaluation of Mandibular Anatomy Associated With Bad Splits in Sagittal Split Ramus Osteotomy of Mandible.

Science.gov (United States)

Wang, Tongyue; Han, Jeong Joon; Oh, Hee-Kyun; Park, Hong-Ju; Jung, Seunggon; Park, Yeong-Joon; Kook, Min-Suk

2016-07-01

This study aimed to identify risk factors associated with bad splits during sagittal split ramus osteotomy by using three-dimensional computed tomography. This study included 8 bad splits and 47 normal patients without bad splits. Mandibular anatomic parameters related to osteotomy line were measured. These included anteroposterior width of the ramus at level of lingula, distance between external oblique ridge and lingula, distance between sigmoid notch and inferior border of mandible, mandibular angle, distance between inferior outer surface of mandibular canal and inferior border of mandible under distal root of second molar (MCEM), buccolingual thickness of the ramus at level of lingula, and buccolingual thickness of the area just distal to first molar (BTM1) and second molar (BTM2). The incidence of bad splits in 625 sagittal split osteotomies was 1.28%. Compared with normal group, bad split group exhibited significantly thinner BTM2 and shorter sigmoid notch and inferior border of mandible (P bad splits. These anatomic data may help surgeons to choose the safest surgical techniques and best osteotomy sites.
Effluent releases at the TRIGA reactor facility

Energy Technology Data Exchange (ETDEWEB)

Whittemore, W L [General Atomic Co., San Diego, CA (United States)

1974-07-01

The principal effluent from the operating TRIGA reactors in our facility is argon-41. As monitored by a recording gas and particulate stack monitor, the values shown in the table, the Mark III operating 24 hours per day for very long periods produced the largest amount of radioactive argon. The quantity of 23.7 Ci A-41 when diluted by the normal reactor room ventilation system corresponded to 1.45 x 10{sup -6} {mu}Ci/cc. As diluted in the roof stack stream and the reactor building wake, the concentration immediately outside the reactor building was 25% MPC for an unrestricted area. The continued dilution of this effluent resulted in a concentration of a few percent MPC at the site boundary (unrestricted area) 350 meters from the reactor. (author)
Report on the specialists' meeting on passive and active safety features of liquid-metal fast breeder reactors organized by the international atomic energy agency at Oarai Engineering Centre of power reactor and nuclear development corporation, Japan, November 5-7, 1991

International Nuclear Information System (INIS)

Paranjpe, S.R.

1992-01-01

As recommended by the International Working Group on Fast Reactors (IWGFR), the International Atomic Energy Agency organized a specialists' meeting on passive and active safety features of liquid-metal fast breeder reactors. Specialists from all member countries of IWGFR-China, France, Germany, India, Italy, Japan, Russia, the United Kingdom, and the United States-participated in the meeting and made presentations as listed in Table 1. The Commission of European Communities also sent representatives to the meeting. Table 2 contains a list of participants. The meeting consisted of five sessions: (1) an overview, (2) safety characteristics of decay heal removal systems, (3) safely characteristics of reactor protection systems and reactor shutdown systems, (4) safely characteristics of reactor cores, and (5) general discussions antiformulation of recommendations
Qualification of the calculational methods of the fluence in the pressurised water reactors. Improvement of the cross sections treatment by the probability table method; Qualification des methodes de calculs de fluence dans les reacteurs a eau pressurisee. Amelioration du traitement des sections efficaces par la methode des tables de probabilite

Energy Technology Data Exchange (ETDEWEB)

Zheng, S H

1994-01-01

It is indispensable to know the fluence on the nuclear reactor pressure vessel. The cross sections and their treatment have an important rule to this problem. In this study, two ``benchmarks`` have been interpreted by the Monte Carlo transport program TRIPOLI to qualify the calculational method and the cross sections used in the calculations. For the treatment of the cross sections, the multigroup method is usually used but it exists some problems such as the difficulty to choose the weighting function and the necessity of a great number of energy to represent well the cross section`s fluctuation. In this thesis, we propose a new method called ``Probability Table Method`` to treat the neutron cross sections. For the qualification, a program of the simulation of neutron transport by the Monte Carlo method in one dimension has been written; the comparison of multigroup`s results and probability table`s results shows the advantages of this new method. The probability table has also been introduced in the TRIPOLI program; the calculational results of the iron deep penetration benchmark has been improved by comparing with the experimental results. So it is interest to use this new method in the shielding and neutronic calculation. (author). 42 refs., 109 figs., 36 tabs.
Strømmålinger ved Sæby Udløbsledning

DEFF Research Database (Denmark)

Larsen, Torben

Med henblik på at vurdere tidevandsstrømningens amplitude i det kystnære område ud for Sæby har man i ca. 14 dage fra 25.5.81 til 11.6.81 haft udlagt en Aanderraa RCM 4 strømmåler ca. 1 m under overfladen på ca. 4 m vanddybde. Måleren la ca. 900 m fra land i en linje, som var en forlængelse af...
The matter of probability controlling melting of nuclear ship reactor

International Nuclear Information System (INIS)

Pihowicz, W.; Sobczyk, S.

2008-01-01

In the first part of this work beside description of split power, power of radioactivity disintegration and afterpower and its ability to extinguish, the genera condition of melting nuclear reactor core and its detailed versions were described. This paper also include the description of consequences melting nuclear reactor core both in case of stationary and mobile (ship) reactor and underline substantial differences. Next, fulfilled with succeed, control under melting of stationary nuclear reactor core was characterized.The middle part describe author's idea of controlling melting of nuclear ship reactor core. It is based on: - the suggestion of prevention pressure's untightness in safety tank of nuclear ship reactor by '' corium '' - and the suggestion of preventing walls of this tank from melting by '' corium ''. In the end the technological and construction barriers of the prevention from melting nuclear ship reactor and draw conclusions was presented. (author)
Which life expectancy for EDF reactors?

International Nuclear Information System (INIS)

Carlier, P.; Fluchere, J.; Giraud, B.; Poizat, F.

2008-01-01

After having recalled that the French nuclear reactors have been designed for a 40-year long life with a 30-year depreciation, the authors notice that foreign reactors which are identical or older get a 60 year operation authorization. The authors analyse the age of the nuclear reactors which are currently operating in the world, in terms of age, of country. They also discuss the license renewal process in the USA. In the next part they analyse the conditions of a life extension to 60 years. These conditions concern material monitoring, maintenance strategy for the replacement of components, the condition of installations, personnel management and behaviour. Appendices contain a table of operating reactors which are still being operated and more than 30 year old, the status of license renewal applications to the US NRC
Nuclear Power Reactors in the World. 2013 Ed

International Nuclear Information System (INIS)

2013-01-01

Nuclear Power Reactors in the World is an annual publication that presents the most recent data pertaining to nuclear power reactors in IAEA Member States. This thirty-third edition of Reference Data Series No. 2 provides a detailed comparison of various statistics through 31 December 2012. The tables and figures contain the following information: - General statistics on nuclear reactors in IAEA Member States; - Technical data on specific reactors that are either planned, under construction or operational, or that have been shut down or decommissioned; - Performance data on reactors operating in IAEA Member States, as reported to the IAEA. The data compiled in this publication is a product of the IAEA's Power Reactor Information System (PRIS). The PRIS database is a comprehensive source of data on all nuclear power reactors in the world. It includes specification and performance history data on operational reactors as well as on reactors under construction or in the decommissioning process. The IAEA collects data through designated national correspondents in Member States
TRIGA Mark II nuclear reactor facility. Final report, 1 July 1980--30 June 1995

Energy Technology Data Exchange (ETDEWEB)

Ryan, B.C.

1997-05-01

This report is a final culmination of activities funded through the Department of Energy`s (DOE) University Reactor Sharing Program, Grant DE-FG02-80ER10273, during the period 1 July 1980 through 30 June 1995. Progress reports have been periodically issued to the DOE, namely the Reactor Facility Annual Reports C00-2082/2219-7 through C00-2082/10723-21, which are contained as an appendix to this report. Due to the extent of time covered by this grant, summary tables are presented. Table 1 lists the fiscal year financial obligations of the grant. As listed in the original grant proposals, the DOE grant financed 70% of project costs, namely the total amount spent of these projects minus materials costs and technical support. Thus the bulk of funds was spent directly on reactor operations. With the exception of a few years, spending was in excess of the grant amount. As shown in Tables 2 and 3, the Reactor Sharing grant funded a immense number of research projects in nuclear engineering, geology, animal science, chemistry, anthropology, veterinary medicine, and many other fields. A list of these users is provided. Out of the average 3000 visitors per year, some groups participated in classes involving the reactor such as Boy Scout Merit Badge classes, teacher`s workshops, and summer internships. A large number of these projects met the requirements for the Reactor Sharing grant, but were funded by the University instead.
TRIGA Mark II nuclear reactor facility. Final report, 1 July 1980--30 June 1995

International Nuclear Information System (INIS)

Ryan, B.C.

1997-05-01

This report is a final culmination of activities funded through the Department of Energy's (DOE) University Reactor Sharing Program, Grant DE-FG02-80ER10273, during the period 1 July 1980 through 30 June 1995. Progress reports have been periodically issued to the DOE, namely the Reactor Facility Annual Reports C00-2082/2219-7 through C00-2082/10723-21, which are contained as an appendix to this report. Due to the extent of time covered by this grant, summary tables are presented. Table 1 lists the fiscal year financial obligations of the grant. As listed in the original grant proposals, the DOE grant financed 70% of project costs, namely the total amount spent of these projects minus materials costs and technical support. Thus the bulk of funds was spent directly on reactor operations. With the exception of a few years, spending was in excess of the grant amount. As shown in Tables 2 and 3, the Reactor Sharing grant funded a immense number of research projects in nuclear engineering, geology, animal science, chemistry, anthropology, veterinary medicine, and many other fields. A list of these users is provided. Out of the average 3000 visitors per year, some groups participated in classes involving the reactor such as Boy Scout Merit Badge classes, teacher's workshops, and summer internships. A large number of these projects met the requirements for the Reactor Sharing grant, but were funded by the University instead
Patterns of genetic diversity at the nine forensically approved STR loci in the Indian populations.

Science.gov (United States)

Dutta, Ranjan; Reddy, B Mohan; Chattopadhyay, P; Kashyap, V K; Sun, Guangyun; Deka, Ranjan

2002-02-01

Genetic diversity at the nine short tandem repeat (STR) loci, which are universally approved and widely used for forensic investigations, has been studied among nine Indian populations with diverse ethnic, linguistic, and geographic backgrounds. The nine STR loci were profiled on 902 individuals using fluorescent detection methods on an ABI377 System, with the aid of an Amp-F1 Profiler Plus Kit. The studied populations include two upper castes, Brahmin and Kayastha; a tribe, Garo, from West Bengal; a Hindu caste, Meitei, with historical links to Bengal Brahmins; a migrant group of Muslims; three tribal groups, Naga, Kuki and Hmar, from Manipur in northeast India; and a middle-ranking caste, Golla, who are seminomadic herders from Andhra Pradesh. Gene diversity analysis suggests that the average heterozygosity is uniformly high (>0.8) in the studied populations, with the coefficient of gene differentiation at 0.050 +/- 0.0054. Both neighbor-joining (NJ) and unweighted pair group method with arithmetic mean (UPGMA) trees based on DA distances bring out distinct clusters that are consistent with ethnic, linguistic, and/or geographic backgrounds of the populations. The fit of the Harpending and Ward model of regression of average heterozygosity on the gene frequency centroid is found to be good, and the observed outliers are consistent with the population structure and history of the studied populations. Our study suggests that the nine STR loci, used so far mostly for forensic investigations, can be used fruitfully for microevolutionary studies as well, and for reconstructing the phylogenetic history of human populations, at least at the local level.
[Observation and analysis on mutation of routine STR locus].

Science.gov (United States)

Li, Qiu-yang; Feng, Wei-jun; Yang, Qin-gen

2005-05-01

To observe and analyze the characteristic of mutation at STR locus. 27 mutant genes observed in 1211 paternity testing cases were checked by PAGE-silver stained and PowerPlex 16 System Kit and validated by sequencing. Mutant genes locate on 15 loci. The pattern of mutation was accord with stepwise mutation model. The mutation ratio of male-to-female was 8:1 and correlated to the age of father. Mutation rate is correlated to the geometric mean of the number of homogeneous repeats of locus. The higher the mean, the higher the mutation rate. These loci are not so appropriate for use in paternity testing.
Stochastic filtering of quantitative data from STR DNA analysis

DEFF Research Database (Denmark)

Tvedebrink, Torben; Eriksen, Poul Svante; Mogensen, Helle Smidt

due to the apparatus used for measurements). Pull-up effects (more systematic increase caused by overlap in the spectrum) Stutters (peaks located four basepairs before the true peak). We present filtering techniques for all three technical artifacts based on statistical analysis of data from......The quantitative data observed from analysing STR DNA is a mixture of contributions from various sources. Apart from the true allelic peaks, the observed signal consists of at least three components resulting from the measurement technique and the PCR amplification: Background noise (random noise...... controlled experiments conducted at The Section of Forensic Genetics, Department of Forensic Medicine, Faculty of Health Sciences, Universityof Copenhagen, Denmark....
Phenomena identification ranking table and knowledge base gaps and needs for the modular high-temperature gas-cooled reactor

International Nuclear Information System (INIS)

Tokuhiro, Akira; Potirniche, Gabriel; Rink, Karl

2009-01-01

The U.S. is developing a modular high-temperature gas-cooled reactor (MHTGR) under the Next Generation Nuclear Plant (NGNP); also known as the Very High Temperature Reactor (VHTR). The generic MHTGR is a graphite-moderated, gas-cooled reactor (GCR) of either a prismatic modular (block-type, PMR) or pebble-bed (PBR) core configuration. The pebble-bed design requires new attention with respect to neutronics, materials, thermal hydraulic, safety and licensing relative to the set of phenomena and engineering analyses associated with the current fleet of legacy LWRs. In fact, the relative knowledge and experiential base on gas reactors is small in comparison to the LWR. There is a dated body of knowledge from some 25+ years ago on GCRs; recently there is a renewed interest. Thus in the present design and development phase of the NGNP/VHTR, there are relevant thermohydraulic safety issues surrounding the MHTGR with issues impacting foremost the design review process. A common phenomena with respect to PMR and PBR core design, is that concerning 'graphite dust' and its interaction and transport with potential fission products (FP) that may be present within the graphite and subsequently in the primary system. The nature of the graphite and FPs, when circulated or transported in the primary, and possibly beyond, is of concern as potentially an relevant 'source term' (radionuclide inventory) of the MHTGR. Based on NUREG/CR-6944, Volumes 1-5, the author briefly describes the state-of-the art knowledge base on graphite dust and FP transport with respect to the anticipated design of the MHTGR. In addition, from the Phenomena Identification and Ranking Tables (PIRTs) developed in these reports we concurrently identify and describe 'gaps and needs' of the knowledge base. That is, we also present the knowledge base gaps and needs with respect to the following: 1) R and D needs relative to PIRTs, 2) (experimental) database needs relative to PIRTs, and 3) simulation and modeling
The Split-Brain Phenomenon Revisited: A Single Conscious Agent with Split Perception.

Science.gov (United States)

Pinto, Yair; de Haan, Edward H F; Lamme, Victor A F

2017-11-01

The split-brain phenomenon is caused by the surgical severing of the corpus callosum, the main route of communication between the cerebral hemispheres. The classical view of this syndrome asserts that conscious unity is abolished. The left hemisphere consciously experiences and functions independently of the right hemisphere. This view is a cornerstone of current consciousness research. In this review, we first discuss the evidence for the classical view. We then propose an alternative, the 'conscious unity, split perception' model. This model asserts that a split brain produces one conscious agent who experiences two parallel, unintegrated streams of information. In addition to changing our view of the split-brain phenomenon, this new model also poses a serious challenge for current dominant theories of consciousness. Copyright © 2017 Elsevier Ltd. All rights reserved.
Triadic split-merge sampler

Science.gov (United States)

van Rossum, Anne C.; Lin, Hai Xiang; Dubbeldam, Johan; van der Herik, H. Jaap

2018-04-01

In machine vision typical heuristic methods to extract parameterized objects out of raw data points are the Hough transform and RANSAC. Bayesian models carry the promise to optimally extract such parameterized objects given a correct definition of the model and the type of noise at hand. A category of solvers for Bayesian models are Markov chain Monte Carlo methods. Naive implementations of MCMC methods suffer from slow convergence in machine vision due to the complexity of the parameter space. Towards this blocked Gibbs and split-merge samplers have been developed that assign multiple data points to clusters at once. In this paper we introduce a new split-merge sampler, the triadic split-merge sampler, that perform steps between two and three randomly chosen clusters. This has two advantages. First, it reduces the asymmetry between the split and merge steps. Second, it is able to propose a new cluster that is composed out of data points from two different clusters. Both advantages speed up convergence which we demonstrate on a line extraction problem. We show that the triadic split-merge sampler outperforms the conventional split-merge sampler. Although this new MCMC sampler is demonstrated in this machine vision context, its application extend to the very general domain of statistical inference.
Analysis of short tandem repeat (STR) polymorphisms by the powerplex 16 system and capillary electrophoresis: application to forensic practice.

OpenAIRE

Okamoto, Osamu; Yamamoto, Yuji; Inagaki, Sachiyo; Yoshitome, Kei; ishikawa, Takaki; Imabayashi, Kiyomi; Miyaishi, Satoru; Ishizu, Hideo

2003-01-01

Allele and genotype frequencies for 15 short tandem repeat (STR) polymorphisms--D3S1358, TH01, D21S11, D18S51, Penta E, D5S818, D13S317, D7S820, D16S539, CSF1PO, Penta D, vWA, D8S1179, TPOX and FGA--in a Japanese population were estimated. No deviations of the observed allele frequency from Hardy-Weinberg equilibrium expectations were found for any of the systems studied. Between 2 new pentanucleotide STR loci, Penta E and Penta D, for which there is only limited data regarding the allelic di...
Use of TCSR with Split Windings for Shortening the Spar Cycle Time in 500 kV Lines

Energy Technology Data Exchange (ETDEWEB)

Matinyan, A. M., E-mail: al-drm@mail.ru; Peshkov, M. V.; Karpov, V. N.; Alekseev, N. A. [JSC “R& D Center at Federal Grid Company of Unified Power System,” (Russian Federation)

2017-01-15

The arc-fault recharge phenomenon in single-phase automatic reclosure (SPAR) of a line is examined. Abrief description is given of the design of a 500 kV thyristor controlled shunt reactor (TCSR) with split valve-side windings. This type of TCSR is shown to effectively quench a single-phase arc fault in a power transmission line and shortens the SPAR cycle time.

Chemical surveillance of commercial fast breeder reactors

International Nuclear Information System (INIS)

Stamm, H.H.; Stade, K.Ch.

1988-01-01

After BN-600 (USSR) and SUPERPHENIX (France) were started succesfully, the international development of LMFBRs is standing at the doorstep of commercial use. For commercial use of LMFBRs cost reductions for construction and operation are highly desirable and necessary. Several nations developing breeder reactors have joined in a common effort in order to reach this aim by standardization and harmonization. On the base of more than 20 years of operation experience of experimental reactors (EBR-II, FFTF, RAPSODIE, DFR, BR-5/BR-10, BOR-60, JOYO, KNK-II) and demonstration plants (PHENIX, PFR, BN-350), possibilities for standardization in chemical surveillance of commercial breeder reactors without any loss of availability, reliability and reactor safety will be discussed in the following chapters. Loop-type reactors will be considered as well as pool-type reactors, although all commercial plants under consideration so far (SUPERPHENIX II, BN-800, BN-1600, CFBR, SNR-2, EFR) include pool-type reactors only. Table 1 gives a comparison of the Na inventories of test reactors, prototype plants and commercial LMFBRs
Noncell- and cell-autonomous G-protein-signaling converges with Ca2+/mitogen-activated protein kinase signaling to regulate str-2 receptor gene expression in Caenorhabditis elegans.

NARCIS (Netherlands)

H. Lans (Hannes); G. Jansen (Gert)

2006-01-01

textabstractIn the sensory system of C. elegans, the candidate odorant receptor gene str-2 is strongly expressed in one of the two AWC neurons and weakly in both ASI neurons. Asymmetric AWC expression results from suppression of str-2 expression by a Ca2+/MAPK signaling pathway in one of the AWC
STR melting curve analysis as a genetic screening tool for crime scene samples.

Science.gov (United States)

Nguyen, Quang; McKinney, Jason; Johnson, Donald J; Roberts, Katherine A; Hardy, Winters R

2012-07-01

In this proof-of-concept study, high-resolution melt curve (HRMC) analysis was investigated as a postquantification screening tool to discriminate human CSF1PO and THO1 genotypes amplified with mini-STR primers in the presence of SYBR Green or LCGreen Plus dyes. A total of 12 CSF1PO and 11 HUMTHO1 genotypes were analyzed on the LightScanner HR96 and LS-32 systems and were correctly differentiated based upon their respective melt profiles. Short STR amplicon melt curves were affected by repeat number, and single-source and mixed DNA samples were additionally differentiated by the formation of heteroduplexes. Melting curves were shown to be unique and reproducible from DNA quantities ranging from 20 to 0.4 ng and distinguished identical from nonidentical genotypes from DNA derived from different biological fluids and compromised samples. Thus, a method is described which can assess both the quantity and the possible probative value of samples without full genotyping. 2012 American Academy of Forensic Sciences. Published 2012. This article is a U.S. Government work and is in the public domain in the U.S.A.
reactor power control using fuzzy logic

International Nuclear Information System (INIS)

Ahmed, A.E.E.

2001-01-01

power stabilization is a critical issue in nuclear reactors. convention pd- controller is currently used in egypt second testing research reactor (ETRR-2). two fuzzy controllers are proposed to control the reactor power of ETRR-2 reactor. the design of the first one is based on a set of linguistic rules that were adopted from the human operators experience. after off-line fuzzy computations, the controller is a lookup table, and thus, real time controller is achieved. comparing this f lc response with the pd-controller response, which already exists in the system, through studying the expected transients during the normal operation of ETRR-2 reactor, the simulation results show that, fl s has the better response, the second controller is adaptive fuzzy controller, which is proposed to deal with system non-linearity . The simulation results show that the proposed adaptive fuzzy controller gives a better integral square error (i se) index than the existing conventional od controller
DETECTION OF FLUX EMERGENCE, SPLITTING, MERGING, AND CANCELLATION OF NETWORK FIELD. I. SPLITTING AND MERGING

Energy Technology Data Exchange (ETDEWEB)

Iida, Y.; Yokoyama, T. [Department of Earth and Planetary Science, University of Tokyo, Hongo, Bunkyo-ku, Tokyo 113-0033 (Japan); Hagenaar, H. J. [Lockheed Martin Advanced Technology Center, Org. ADBS, Building 252, 3251 Hanover Street, Palo Alto, CA 94304 (United States)

2012-06-20

Frequencies of magnetic patch processes on the supergranule boundary, namely, flux emergence, splitting, merging, and cancellation, are investigated through automatic detection. We use a set of line-of-sight magnetograms taken by the Solar Optical Telescope (SOT) on board the Hinode satellite. We found 1636 positive patches and 1637 negative patches in the data set, whose time duration is 3.5 hr and field of view is 112'' Multiplication-Sign 112''. The total numbers of magnetic processes are as follows: 493 positive and 482 negative splittings, 536 positive and 535 negative mergings, 86 cancellations, and 3 emergences. The total numbers of emergence and cancellation are significantly smaller than those of splitting and merging. Further, the frequency dependence of the merging and splitting processes on the flux content are investigated. Merging has a weak dependence on the flux content with a power-law index of only 0.28. The timescale for splitting is found to be independent of the parent flux content before splitting, which corresponds to {approx}33 minutes. It is also found that patches split into any flux contents with the same probability. This splitting has a power-law distribution of the flux content with an index of -2 as a time-independent solution. These results support that the frequency distribution of the flux content in the analyzed flux range is rapidly maintained by merging and splitting, namely, surface processes. We suggest a model for frequency distributions of cancellation and emergence based on this idea.
New or little-known species of Chaetocladius s. str. Kieffer, 1911 (Diptera: Chironomidae: Orthocladiinae) from the Amur River basin (Russian Far East).

Science.gov (United States)

Makarchenko, Eugenyi A; Makarchenko, Marina A; Semenchenko, Alexander A

2017-03-27

Chironomids of the subgenus Chaetocladius s. str. from the Amur River basin are revised using both morphological characters and molecular data. Three new species, C. egorych sp. nov., C. lopatinskiy sp. nov. and C. yavorskayae sp. nov., are described and figured. The pupa of C. fedotkin is described for the first time. Adult males of C. ligni and C. piger, little-known in the Far East, are redescribed and annotated, and key to males of the Chaetocladius s. str. from the Amur River basin is provided. A reference 658 bp barcode sequence from a fragment of the mitochondrial gene cytochrome oxidase I (COI) was used as a tool for species delimitation. Comparisons with corresponding regions of COI between 5 species in the subgenus produced K2P genetic distances of 8.3-12.6%, values well associated with interspecific variation. Molecular data were also used for the reconstruction of the phylogenetic relationships within the subgenus Chaetocladius s. str.
Genetic sub-structure in western Mediterranean populations revealed by 12 Y-chromosome STR loci

DEFF Research Database (Denmark)

Rodríguez, V; Tomas Mas, Carmen; Sánchez, J J

2008-01-01

Haplotype and allele frequencies of 12 Y-chromosome short tandem repeat (Y-STR) loci (DYS19, DYS389I, DYS389II, DYS390, DYS391, DYS392, DYS393, DYS385 a/b, DYS437, DYS438 and DYS439) included in the Powerplex(R) Y System were determined in seven western Mediterranean populations from Valencia, Ma...
Splitting: The Development of a Measure.

Science.gov (United States)

Gerson, Mary-Joan

1984-01-01

Described the development of a scale that measures splitting as a psychological structure. The construct validity of the splitting scale is suggested by the positive relationship between splitting scores and a diagnostic measure of the narcissistic personality disorder, as well as a negative relationship between splitting scores and levels of…
Bad splits in bilateral sagittal split osteotomy: systematic review and meta-analysis of reported risk factors.

Science.gov (United States)

Steenen, S A; van Wijk, A J; Becking, A G

2016-08-01

An unfavourable and unanticipated pattern of the bilateral sagittal split osteotomy (BSSO) is generally referred to as a 'bad split'. Patient factors predictive of a bad split reported in the literature are controversial. Suggested risk factors are reviewed in this article. A systematic review was undertaken, yielding a total of 30 studies published between 1971 and 2015 reporting the incidence of bad split and patient age, and/or surgical technique employed, and/or the presence of third molars. These included 22 retrospective cohort studies, six prospective cohort studies, one matched-pair analysis, and one case series. Spearman's rank correlation showed a statistically significant but weak correlation between increasing average age and increasing occurrence of bad splits in 18 studies (ρ=0.229; Pbad split among the different splitting techniques. A meta-analysis pooling the effect sizes of seven cohort studies showed no significant difference in the incidence of bad split between cohorts of patients with third molars present and concomitantly removed during surgery, and patients in whom third molars were removed at least 6 months preoperatively (odds ratio 1.16, 95% confidence interval 0.73-1.85, Z=0.64, P=0.52). In summary, there is no robust evidence to date to show that any risk factor influences the incidence of bad split. Copyright © 2016 International Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Advanced nuclear reactor types and technologies

International Nuclear Information System (INIS)

Ignatiev, V.; Devell, L.

1995-01-01

The document is a comprehensive world-wide catalogue of concepts and designs of advanced fission reactor types and fuel cycle technologies. Two parts have been prepared: Part 1 Reactors for Power Production and Part 2 Heating and Other Reactor Applications. Part 3, which will cover advanced waste management technology, reprocessing and disposal for different nuclear fission options is planned for compilation during 1995. The catalogue was prepared according to a special format which briefly presents the project title, technical approach, development status, application of the technology, reactor type, power output, and organization which developed these designs. Part 1 and 2 cover water cooled reactors, liquid metal fast reactors, gas-cooled reactors and molten salt reactors. Subcritical accelerator-driven systems are also considered. Various reactor applications as power production, heat generation, ship propulsion, space power sources and transmutation of such waste are included. Each project is described within a few pages with the main features of an actual design using a table with main technical data and figure as well as references for additional information. Each chapter starts with an introduction which briefly describes main trends and approaches in this field. Explanations of terms and abbreviations are provided in a glossary
Advanced nuclear reactor types and technologies

Energy Technology Data Exchange (ETDEWEB)

Ignatiev, V [ed.; Feinberg, O; Morozov, A [Russian Research Centre ` Kurchatov Institute` , Moscow (Russian Federation); Devell, L [Studsvik Eco and Safety AB, Nykoeping (Sweden)

1995-07-01

The document is a comprehensive world-wide catalogue of concepts and designs of advanced fission reactor types and fuel cycle technologies. Two parts have been prepared: Part 1 Reactors for Power Production and Part 2 Heating and Other Reactor Applications. Part 3, which will cover advanced waste management technology, reprocessing and disposal for different nuclear fission options is planned for compilation during 1995. The catalogue was prepared according to a special format which briefly presents the project title, technical approach, development status, application of the technology, reactor type, power output, and organization which developed these designs. Part 1 and 2 cover water cooled reactors, liquid metal fast reactors, gas-cooled reactors and molten salt reactors. Subcritical accelerator-driven systems are also considered. Various reactor applications as power production, heat generation, ship propulsion, space power sources and transmutation of such waste are included. Each project is described within a few pages with the main features of an actual design using a table with main technical data and figure as well as references for additional information. Each chapter starts with an introduction which briefly describes main trends and approaches in this field. Explanations of terms and abbreviations are provided in a glossary.
Pretreatment tables predicting pathologic stage of locally advanced prostate cancer.

Science.gov (United States)

Joniau, Steven; Spahn, Martin; Briganti, Alberto; Gandaglia, Giorgio; Tombal, Bertrand; Tosco, Lorenzo; Marchioro, Giansilvio; Hsu, Chao-Yu; Walz, Jochen; Kneitz, Burkhard; Bader, Pia; Frohneberg, Detlef; Tizzani, Alessandro; Graefen, Markus; van Cangh, Paul; Karnes, R Jeffrey; Montorsi, Francesco; van Poppel, Hein; Gontero, Paolo

2015-02-01

Pretreatment tables for the prediction of pathologic stage have been published and validated for localized prostate cancer (PCa). No such tables are available for locally advanced (cT3a) PCa. To construct tables predicting pathologic outcome after radical prostatectomy (RP) for patients with cT3a PCa with the aim to help guide treatment decisions in clinical practice. This was a multicenter retrospective cohort study including 759 consecutive patients with cT3a PCa treated with RP between 1987 and 2010. Retropubic RP and pelvic lymphadenectomy. Patients were divided into pretreatment prostate-specific antigen (PSA) and biopsy Gleason score (GS) subgroups. These parameters were used to construct tables predicting pathologic outcome and the presence of positive lymph nodes (LNs) after RP for cT3a PCa using ordinal logistic regression. In the model predicting pathologic outcome, the main effects of biopsy GS and pretreatment PSA were significant. A higher GS and/or higher PSA level was associated with a more unfavorable pathologic outcome. The validation procedure, using a repeated split-sample method, showed good predictive ability. Regression analysis also showed an increasing probability of positive LNs with increasing PSA levels and/or higher GS. Limitations of the study are the retrospective design and the long study period. These novel tables predict pathologic stage after RP for patients with cT3a PCa based on pretreatment PSA level and biopsy GS. They can be used to guide decision making in men with locally advanced PCa. Our study might provide physicians with a useful tool to predict pathologic stage in locally advanced prostate cancer that might help select patients who may need multimodal treatment. Copyright © 2014 European Association of Urology. Published by Elsevier B.V. All rights reserved.
Nuclear reactors built, being built, or planned, 1991

Energy Technology Data Exchange (ETDEWEB)

Simpson, B.

1992-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1991. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is an American company -- working either independently or in cooperation with a foreign company (Part 4, in each section). Critical assembly refers to an assembly of fuel and assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5).
Nuclear reactors built, being built, or planned, 1991

International Nuclear Information System (INIS)

Simpson, B.

1992-07-01

This document contains unclassified information about facilities built, being built, or planned in the United States for domestic use or export as of December 31, 1991. The book is divided into three major sections: Section 1 consists of a reactor locator map and reactor tables; Section 2 includes nuclear reactors that are operating, being built, or planned; and Section 3 includes reactors that have been shut down permanently or dismantled. Sections 2 and 3 contain the following classification of reactors: Civilian, Production, Military, Export, and Critical Assembly. Export reactor refers to a reactor for which the principal nuclear contractor is an American company -- working either independently or in cooperation with a foreign company (Part 4, in each section). Critical assembly refers to an assembly of fuel and assembly of fuel and moderator that requires an external source of neutrons to initiate and maintain fission. A critical assembly is used for experimental measurements (Part 5)
Nuclear Power Reactors in the World. 2014 Ed

International Nuclear Information System (INIS)

2014-01-01

Nuclear Power Reactors in the World is an annual publication that presents the most recent data pertaining to nuclear power reactors in IAEA Member States. This thirty-fourth edition of Reference Data Series No. 2 provides a detailed comparison of various statistics up to and including 31 December 2013. The tables and figures contain the following information: — General statistics on nuclear reactors in IAEA Member States; — Technical data on specific reactors that are either planned, under construction or operational, or that have been shut down or decommissioned; — Performance data on reactors operating in IAEA Member States, as reported to the IAEA. The data compiled in this publication is a product of the IAEA’s Power Reactor Information System (PRIS). The PRIS database is a comprehensive source of data on all nuclear power reactors in the world. It includes specification and performance history data on operational reactors as well as on reactors under construction or in the decommissioning process. The IAEA collects this data through designated national correspondents in Member States
Nuclear Power Reactors in the World. 2016 Ed

International Nuclear Information System (INIS)

2016-01-01

Nuclear Power Reactors in the World is an annual publication that presents the most recent data pertaining to reactor units in IAEA Member States. This thirty-sixth edition of Reference Data Series No. 2 provides a detailed comparison of various statistics up to and including 31 December 2015. The tables and figures contain the following information: — General statistics on nuclear reactors in IAEA Member States; — Technical data on specific reactors that are either planned, under construction or operational, or that have been shut down or decommissioned; — Performance data on reactors operating in IAEA Member States, as reported to the IAEA. The data compiled in this publication is a product of the IAEA’s Power Reactor Information System (PRIS). The PRIS database is a comprehensive source of data on all nuclear power reactors in the world. It includes specification and performance history data on operational reactors as well as on reactors under construction or in the decommissioning process. Data is collected by the IAEA via designated national correspondents in Member States
Reactor-specific spent fuel discharge projections, 1987-2020

International Nuclear Information System (INIS)

Walling, R.C.; Heeb, C.M.; Purcell, W.L.

1988-03-01

The creation of five reactor-specific spent fuel data bases that contain information on the projected amounts of spent fuel to be discharged from U.S. commercial nuclear reactors through the year 2020 is described. The data bases contain detailed spent fuel information from existing, planned, and projected pressurized water reactors (PWR) and boiling water eactors (BWR), and one existing high temperature gas reactor (HTGR). The projections are based on individual reactor information supplied by the U.S. reactor owners. The basic information is adjusted to conform to Energy Information Administration (EIA) forecasts for nuclear installed capacity, generation, and spent fuel discharged. The EIA cases considered are: No New Orders (assumes increasing burnup), No New Orders with No Increased Burnup, Upper Reference (assumes increasing burnup), Upper Reference with No Increased Burnup, and Lower Reference (assumes increasing burnup). Detailed, by-reactor tables are provided for annual discharged amounts of spent fuel, for storage requirements assuming maximum at-reactor storage, and for storage requirements assuming maximum at-reactor storage plus intra-utility transshipment of spent fuel. 8 refs., 8 figs., 10 tabs
Performance testing of a semi-automatic card punch system, using direct STR profiling of DNA from blood samples on FTA™ cards.

Science.gov (United States)

Ogden, Samantha J; Horton, Jeffrey K; Stubbs, Simon L; Tatnell, Peter J

2015-01-01

The 1.2 mm Electric Coring Tool (e-Core™) was developed to increase the throughput of FTA(™) sample collection cards used during forensic workflows and is similar to a 1.2 mm Harris manual micro-punch for sampling dried blood spots. Direct short tandem repeat (STR) DNA profiling was used to compare samples taken by the e-Core tool with those taken by the manual micro-punch. The performance of the e-Core device was evaluated using a commercially available PowerPlex™ 18D STR System. In addition, an analysis was performed that investigated the potential carryover of DNA via the e-Core punch from one FTA disc to another. This contamination study was carried out using Applied Biosystems AmpflSTR™ Identifiler™ Direct PCR Amplification kits. The e-Core instrument does not contaminate FTA discs when a cleaning punch is used following excision of discs containing samples and generates STR profiles that are comparable to those generated by the manual micro-punch. © 2014 American Academy of Forensic Sciences.
Split Malcev algebras

Indian Academy of Sciences (India)

project of the Spanish Ministerio de Educación y Ciencia MTM2007-60333. References. [1] Calderón A J, On split Lie algebras with symmetric root systems, Proc. Indian. Acad. Sci (Math. Sci.) 118(2008) 351–356. [2] Calderón A J, On split Lie triple systems, Proc. Indian. Acad. Sci (Math. Sci.) 119(2009). 165–177.
Two-Loop Splitting Amplitudes

International Nuclear Information System (INIS)

Bern, Z.

2004-01-01

Splitting amplitudes govern the behavior of scattering amplitudes at the momenta of external legs become collinear. In this talk we outline the calculation of two-loop splitting amplitudes via the unitarity sewing method. This method retains the simple factorization properties of light-cone gauge, but avoids the need for prescriptions such as the principal value or Mandelstam-Leibbrandt ones. The encountered loop momentum integrals are then evaluated using integration-by-parts and Lorentz invariance identities. We outline a variety of applications for these splitting amplitudes

Two-loop splitting amplitudes

International Nuclear Information System (INIS)

Bern, Z.; Dixon, L.J.; Kosower, D.A.

2004-01-01

Splitting amplitudes govern the behavior of scattering amplitudes at the momenta of external legs become collinear. In this talk we outline the calculation of two-loop splitting amplitudes via the unitarity sewing method. This method retains the simple factorization properties of light-cone gauge, but avoids the need for prescriptions such as the principal value or Mandelstam-Leibbrandt ones. The encountered loop momentum integrals are then evaluated using integration-by-parts and Lorentz invariance identities. We outline a variety of applications for these splitting amplitudes
Method of freezing type dismantling for wasted reactors

International Nuclear Information System (INIS)

Tatsumi, Toshiyuki.

1985-01-01

Purpose: To enable to operate a cutting device in the air by placing a working table on ice while utilizing the ice as radiation shielding materials thereby prevent the diffusion of air contaminations. Method: Upon dismantling a BWR type reactor, ice is packed into a reactor container and a pressure vessel and frozen state is maintained by cooling coils disposed to the outer circumference of the pressure vessel. Then, an airtight hood is covered over the pressure vessel and a working table is rotatably disposed therein. Upon working, when the upper layer ice is melted by a heat pump and discharged, the airtight hood is lowered to a predetermined level. After freezing the melted portion again at the lowered level, cutting work is conducted by an operator in the hood. The cut pieces are conveyed after hoisting the airtight hood by a crane. The pressure vessel is dismantled by repeating the foregoing procedures. In this way, cut pieces can be recovered without falling them to the reactor bottom as in the conventional work in water. In addition, since the procedures are conducted while covering the airtight hood, diffusion of air contaminations can be prevented. (Kamimura, M.)
Situation of the radioactive waste management and the employee radiation exposure in commercial power generation reactor facilities in fiscal 1980

International Nuclear Information System (INIS)

1981-01-01

(1) Situation of the radioactive waste management in commercial power generating reactor facilities: The owners of power generation reactor facilities are obligated not to exceed the target dose around the sites by law in the radioactive waste management. The release of radioactive gaseous and liquid wastes and the storage of radioactive solid wastes in respective reactor facilities in fiscal 1980 are presented in tables (for the former, the data since 1971 are also given). The release control values were satisfied in all the facilities. (2) Situation of employe radiation exposure in commercial power generating reactor facilities: The owners of power generation reactor facilities are obligated not to exceed the permissible exposure doses by law. The Employe exposure doses in respective reactor facilities in fiscal 1980 are given in tables. All exposure doses were below the permissible levels. (J.P.N.)
The Modular Helium Reactor for Hydrogen Production

International Nuclear Information System (INIS)

E. Harvego; M. Richards; A. Shenoy; K. Schultz; L. Brown; M. Fukuie

2006-01-01

For electricity and hydrogen production, an advanced reactor technology receiving considerable international interest is a modular, passively-safe version of the high-temperature, gas-cooled reactor (HTGR), known in the U.S. as the Modular Helium Reactor (MHR), which operates at a power level of 600 MW(t). For hydrogen production, the concept is referred to as the H2-MHR. Two concepts that make direct use of the MHR high-temperature process heat are being investigated in order to improve the efficiency and economics of hydrogen production. The first concept involves coupling the MHR to the Sulfur-Iodine (SI) thermochemical water splitting process and is referred to as the SI-Based H2-MHR. The second concept involves coupling the MHR to high-temperature electrolysis (HTE) and is referred to as the HTE-Based H2-MHR
Reactor-specific spent fuel discharge projections: 1985 to 2020

International Nuclear Information System (INIS)

Heeb, C.M.; Libby, R.A.; Walling, R.C.; Purcell, W.L.

1986-09-01

The creation of four spent-fuel data bases that contain information on the projected amounts of spent fuel to be discharged from US commercial nuclear reactors through the year 2020 is described. The data bases contain detailed spent-fuel information from existing, planned, and projected pressurized water reactors (PWR) and boiling water reactors (BWR). The projections are based on individual reactor information supplied by the US reactor owners. The basic information is adjusted to conform to Energy Information Agency (EIA) forecasts for nuclear installed capacity, generation, and spent fuel discharged. The EIA cases considered are: (1) No New Orders with Extended Burnup, (2) No New Orders with Constant Burnup, (3) Middle Case with Extended Burnup, and (4) Middle Case with Constant Burnup. Detailed, by-reactor tables are provided for annual discharged amounts of spent fuel, for storage requirements assuming maximum-at-reactor storage, and for storage requirements assuming maximum-at-reactor plus intra-utility transshipment of spent fuel
Concentric Split Flow Filter

Science.gov (United States)

Stapleton, Thomas J. (Inventor)

2015-01-01

A concentric split flow filter may be configured to remove odor and/or bacteria from pumped air used to collect urine and fecal waste products. For instance, filter may be designed to effectively fill the volume that was previously considered wasted surrounding the transport tube of a waste management system. The concentric split flow filter may be configured to split the air flow, with substantially half of the air flow to be treated traveling through a first bed of filter media and substantially the other half of the air flow to be treated traveling through the second bed of filter media. This split flow design reduces the air velocity by 50%. In this way, the pressure drop of filter may be reduced by as much as a factor of 4 as compare to the conventional design.
Population genetics for 23 Y-STR loci in Tibetan in China and confirmation of DYS448 null allele.

Science.gov (United States)

Ye, Yi; Gao, Jingshang; Fan, Guangyao; Liao, Linchuan; Hou, Yiping

2015-05-01

Tibetan is one of 56 ethnic groups in China, where a level of genetic sub-structure might be expected. Although a global analysis of Y-chromosomal haplotype diversity for 23 STR loci and Y-STR databases with PPY23 kit were created with collaborative effort, there was a lack of data for Tibetan population. In this study we evaluated 248 unrelated male individuals of Chinese Tibetan living in the Tibet Autonomous Region to explore the underlying genetic structure of Tibetan populations. These samples were typed for 23 short-tandem repeat (STR) loci (DYS19, DYS389I, DYS389II, DYS390, DYS391, DYS392, DYS393, DYS385ab, DYS437, DYS438, DYS439, DYS448, DYS456, DYS458, DYS635, GATAH4, DYS481, DYS533, DYS549, DYS570, DYS576, and DYS643) by using PPY23 kit. A total of 224 different haplotypes were found. Haplotype diversity was 0.9990. Both Rst pairwise analyses and multidimensional scaling plot showed the genetic structure of Tibetan population was significantly different from some of Chinese ethnic groups and neighboring populations. There were few interesting null features at DYS448 observed by PPY23 that deserved some comment. It revealed that PPY23 marker set provided substantially stronger discriminatory power in Tibetan population. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.
Forensic data and microvariant sequence characterization of 27 Y-STR loci analyzed in four Eastern African countries.

Science.gov (United States)

Iacovacci, Giuseppe; D'Atanasio, Eugenia; Marini, Ornella; Coppa, Alfredo; Sellitto, Daniele; Trombetta, Beniamino; Berti, Andrea; Cruciani, Fulvio

2017-03-01

By using the recently introduced 6-dye Yfiler ® Plus multiplex, we analyzed 462 males belonging to 20 ethnic groups from four eastern African countries (Eritrea, Ethiopia, Djibouti and Kenya). Through a Y-STR sequence analysis, combined with 62 SNP-based haplogroup information, we were able to classify observed microvariant alleles at four Y-STR loci as either monophyletic (DYF387S1 and DYS458) or recurrent (DYS449 and DYS627). We found evidence of non-allelic gene conversion among paralogous STRs of the two-copy locus DYF387S1. Twenty-two diallelic and triallelic patterns observed at 13 different loci were found to be significantly over-represented (peastern African ethnic groups, and suggests caution in the use of country-based haplotype frequency distributions for forensic inferences in this region. Copyright © 2016 Elsevier Ireland Ltd. All rights reserved.
Solar Hydrogen Production via a Samarium Oxide-Based Thermochemical Water Splitting Cycle

Directory of Open Access Journals (Sweden)

Rahul Bhosale

2016-04-01

Full Text Available The computational thermodynamic analysis of a samarium oxide-based two-step solar thermochemical water splitting cycle is reported. The analysis is performed using HSC chemistry software and databases. The first (solar-based step drives the thermal reduction of Sm2O3 into Sm and O2. The second (non-solar step corresponds to the production of H2 via a water splitting reaction and the oxidation of Sm to Sm2O3. The equilibrium thermodynamic compositions related to the thermal reduction and water splitting steps are determined. The effect of oxygen partial pressure in the inert flushing gas on the thermal reduction temperature (TH is examined. An analysis based on the second law of thermodynamics is performed to determine the cycle efficiency (ηcycle and solar-to-fuel energy conversion efficiency (ηsolar−to−fuel attainable with and without heat recuperation. The results indicate that ηcycle and ηsolar−to−fuel both increase with decreasing TH, due to the reduction in oxygen partial pressure in the inert flushing gas. Furthermore, the recuperation of heat for the operation of the cycle significantly improves the solar reactor efficiency. For instance, in the case where TH = 2280 K, ηcycle = 24.4% and ηsolar−to−fuel = 29.5% (without heat recuperation, while ηcycle = 31.3% and ηsolar−to−fuel = 37.8% (with 40% heat recuperation.
Wear plates control rod guide tubes top internal reactor vessel C. N. VANDELLOS II; Desgaste placas tubos guia barras de control interno superior vasija del reactor C.N. Vandellos II

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

The guide tubes for control rods forming part of the upper internals of the reactor vessel, its function is to guide the control rod to permit its insertion in the reactor core. These guide tubes are suspended from the upper support plate which are fixed by bolts and extending to the upper core plate which is fastened by clamping bolts (split pin) to prevent lateral displacement of the guide tubes, while allowing axial expansion.
Nuclear reactor control assembly

International Nuclear Information System (INIS)

Negron, S.B.

1991-01-01

This patent describes an assembly for providing global power control in a nuclear reactor having the core split into two halves. It comprises a disk assembly formed from at least two disks each machined with an identical surface hole pattern such that rotation of one disk relative to the other causes the hole pattern to open or close, the disk assembly being positioned substantially at the longitudinal center of and coaxial with the core halves; and means for rotating at least one of the disks relative to the other
Conceptual core designs for a 1200 MWe sodium cooled fast reactor

International Nuclear Information System (INIS)

Joo, H. K.; Lee, K. B.; Yoo, J. W.; Kim, Y. I.

2008-01-01

The conceptual core design for a 1200 MWe sodium cooled fast reactor is being developed under the framework of the Gen-IV SFR development program. To this end, three core concepts have been tested during the development of a core concept: a core with an enrichment split fuel, a core with a single-enrichment fuel with a region-wise varying clad thickness, and a core with a single-enrichment fuel with non-fuel rods. In order to optimize a conceptual core configuration which satisfies the design targets, a sensitivity study of the core design parameters has been performed. Two core concepts, the core with an enrichment-split fuel and the core with a single-enrichment fuel with a region-wise varying clad thickness, have been proposed as the candidates of the conceptual core for a 1200 MWe sodium cooled fast reactor. The detailed core neutronic, fuel behavior, thermal, and safety analyses will be performed for the proposed candidate core concepts to finalize the core design concept. (authors)
Parametric study for high conversion pebble bed reactor

Energy Technology Data Exchange (ETDEWEB)

Teuchert, E.; Ruetten, H. J.

1975-06-15

Tables are presented of fuel cycle costs, conversion ratios and accompanying variations in fuel element designs for a 3,00 MWth high conversion pebble bed reactor with initial high enriched uranium/thorium cycle and subsequent recycling of U-233, Pu-239 and Pu-241.
Protective actions as a factor in power reactor siting

Energy Technology Data Exchange (ETDEWEB)

Gant, K.S.; Schweitzer, M.

1984-06-01

This report examines the relationship between a power reactor site and the ease of implementing protective actions (emergency measures a serious accident). Limiting populating density around a reactor lowers the number of people at risk but cannot assure that all protective actions are possible for those who reside near the reactor. While some protective measures can always be taken (i.e., expedient respiratory protection, sheltering) the ability to evacuate the area or find adequate shelter may depend on the characteristics of the area near the reactor site. Generic siting restrictions designed to identify and eliminate these site-specific constraints would be difficult to formulate. The authors suggest identifying possible impediments to protective actions at a proposed reactor site and addressing these problems in the emergency plans. 66 references, 6 figures, 8 tables.
Protective actions as a factor in power reactor siting

International Nuclear Information System (INIS)

Gant, K.S.; Schweitzer, M.

1984-06-01

This report examines the relationship between a power reactor site and the ease of implementing protective actions (emergency measures a serious accident). Limiting populating density around a reactor lowers the number of people at risk but cannot assure that all protective actions are possible for those who reside near the reactor. While some protective measures can always be taken (i.e., expedient respiratory protection, sheltering) the ability to evacuate the area or find adequate shelter may depend on the characteristics of the area near the reactor site. Generic siting restrictions designed to identify and eliminate these site-specific constraints would be difficult to formulate. The authors suggest identifying possible impediments to protective actions at a proposed reactor site and addressing these problems in the emergency plans. 66 references, 6 figures, 8 tables
Table Tennis Club

CERN Multimedia

Table Tennis Club

2013-01-01

Apparently table tennis plays an important role in physics, not so much because physicists are interested in the theory of table tennis ball scattering, but probably because it provides useful breaks from their deep intellectual occupation. It seems that many of the greatest physicists took table tennis very seriously. For instance, Heisenberg could not even bear to lose a game of table tennis, Otto Frisch played a lot of table tennis, and had a table set up in his library, and Niels Bohr apparently beat everybody at table tennis. Therefore, as the CERN Table Tennis Club advertises on a poster for the next CERN Table Tennis Tournament: “if you want to be a great physicist, perhaps you should play table tennis”. Outdoor table at restaurant n° 1 For this reason, and also as part of the campaign launched by the CERN medical service “Move! & Eat better”, to encourage everyone at CERN to take regular exercise, the CERN Table Tennis Club, with the supp...
Calculation of the geometric buckling for reactors of various shapes

Energy Technology Data Exchange (ETDEWEB)

Sjoestrand, N E

1958-05-15

A systematic investigation is made of the eleven coordinate systems in which the reactor equation {nabla}{sup 2}{phi} + B{sup 2}{phi} = 0 is separable. The fundamental solution and geometric buckling are given for those cases where the separated equations lead to known functions. It is especially shown that reactors of prolate and oblate spheroidal shape can be calculated in detail, and the results are given in extensive tables.
Enhanced DNA Profiling of the Semen Donor in Late Reported Sexual Assaults: Use of Y-Chromosome-Targeted Pre-amplification and Next Generation Y-STR Amplification Systems.

Science.gov (United States)

Hanson, Erin K; Ballantyne, Jack

2016-01-01

In some cases of sexual assault the victim may not report the assault for several days after the incident due to various factors. The ability to obtain an autosomal STR profile of the semen donor from a living victim rapidly diminishes as the post-coital interval is extended due to the presence of only a small amount of male DNA amidst an overwhelming amount of female DNA. Previously, we have utilized various technological tools to overcome the limitations of male DNA profiling in extended interval post-coital samples including the use of Y-chromosome STR profiling, cervical sample, and post-PCR purification permitting the recovery of Y-STR profiles of the male DNA from samples collected 5-6 days after intercourse. Despite this success, the reproductive biology literature reports the presence of spermatozoa in the human cervix up to 7-10 days post-coitus. Therefore, novel and improved methods for recovery of male profiles in extended interval post-coital samples were required. Here, we describe enhanced strategies, including Y-chromosome-targeted pre-amplification and next generation Y-STR amplification kits, that have resulted in the ability to obtain probative male profiles from samples collected 6-9 days after intercourse.
Curves and tables of neutron cross sections of fission product nuclei in JENDL-3

Energy Technology Data Exchange (ETDEWEB)

Nakagawa, Tsuneo [ed.

1992-06-15

Neutron cross sections of 172 nuclei in the fission product region stored in JENDL-3 are shown in graphs and tables. The evaluation work of these nuclei was made by the Fission Product Nuclear Data Working Group of the Japanese Nuclear Data Committee, in the neutron energy region from 10{sup {minus}5} eV to 20 MeV. Almost of the cross section data reproduced in graphs in this report. The cross section averaged over 38 energy intervals are listed in a table. Shown in order tables are thermal cross sections, resonance integrals, Maxwellian neutron flux average cross sections, fission spectrum average cross sections, 14-MeV cross sections, one group average cross sections in neutron flux of typical types of fission reactors and average cross sections in the 30-keV Maxwellian spectrum.
Curves and tables of neutron cross sections of fission product nuclei in JENDL-3

International Nuclear Information System (INIS)

Nakagawa, Tsuneo

1992-06-01

Neutron cross sections of 172 nuclei in the fission product region stored in JENDL-3 are shown in graphs and tables. The evaluation work of these nuclei was made by the Fission Product Nuclear Data Working Group of the Japanese Nuclear Data Committee, in the neutron energy region from 10 -5 eV to 20 MeV. Almost all the cross section data are reproduced in graphs in this report. The cross section averaged over 38 energy intervals are listed in a table. Shown in other tables are thermal cross sections, resonance integrals, Maxwellian neutron flux average cross sections, fission spectrum average cross sections, 14-MeV cross sections, one group average cross sections in neutron flux of typical types of fission reactors and average cross sections in the 30-keV Maxwellian spectrum. (author)

M13 multiple stellar populations seen with the eyes of Strömgren photometry

Science.gov (United States)

Savino, A.; Massari, D.; Bragaglia, A.; Dalessandro, E.; Tolstoy, E.

2018-03-01

We present a photometric study of M13 multiple stellar populations over a wide field of view, covering approximately 6.5 half-light radii, using archival Isaac Newton Telescope observations to build an accurate multiband Strömgren catalogue. The use of the Strömgren index cy permits us to separate the multiple populations of M13 on the basis of their position on the red giant branch. The comparison with medium and high resolution spectroscopic analysis confirms the robustness of our selection criterion. To determine the radial distribution of stars in M13, we complemented our data set with Hubble Space Telescope observations of the cluster core, to compensate for the effect of incompleteness affecting the most crowded regions. From the analysis of the radial distributions, we do not find any significant evidence of spatial segregation. Some residuals may be present in the external regions where we observe only a small number of stars. This finding is compatible with the short dynamical time-scale of M13 and represents, to date, one of the few examples of fully spatially mixed multiple populations in a massive globular cluster.
Calculation of static harmonics of a nuclear reactor using CITATION code

International Nuclear Information System (INIS)

Belchior Junior, A.; Moreira, J.M.L.

1989-01-01

The CITATION code, which solves the multigroup diffusion equation by the finite difference method, calculates the fundamental λ-mode (harmonic) for nuclear reactors. In this work, two fission source correction methods are attempted to obtain higher λ-modes through the CITATION code. The two methods are compared, their advantages and disadvantages analysed and verified against analytical solutions. Two dimensional harmonic modes are calculated for the IEA-R1 research reactor and for the ANGRA-I power reactor. The results are shown in graphics and tables. (author) [pt
Split-illumination electron holography

Energy Technology Data Exchange (ETDEWEB)

Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Inada, Yoshikatsu [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Matsuda, Tsuyoshi [Japan Science and Technology Agency, Kawaguchi, Saitama 332-0012 (Japan); Taniyama, Akira [Corporate Research and Development Laboratories, Sumitomo Metal Industries, Ltd., Amagasaki, Hyogo 660-0891 (Japan); Shindo, Daisuke [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Katahira 2-1-1, Sendai 980-8577 (Japan); Tonomura, Akira [Advanced Science Institute, RIKEN, Hirosawa 2-1, Wako, Saitama 351-0198 (Japan); Okinawa Institute of Science and Technology, Graduate University, Onna-son, Okinawa 904-0495 (Japan); Central Research Laboratory, Hitachi, Ltd., Hatoyama, Saitama 350-0395 (Japan)

2012-07-23

We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.
Split-illumination electron holography

International Nuclear Information System (INIS)

Tanigaki, Toshiaki; Aizawa, Shinji; Suzuki, Takahiro; Park, Hyun Soon; Inada, Yoshikatsu; Matsuda, Tsuyoshi; Taniyama, Akira; Shindo, Daisuke; Tonomura, Akira

2012-01-01

We developed a split-illumination electron holography that uses an electron biprism in the illuminating system and two biprisms (applicable to one biprism) in the imaging system, enabling holographic interference micrographs of regions far from the sample edge to be obtained. Using a condenser biprism, we split an electron wave into two coherent electron waves: one wave is to illuminate an observation area far from the sample edge in the sample plane and the other wave to pass through a vacuum space outside the sample. The split-illumination holography has the potential to greatly expand the breadth of applications of electron holography.
Comparative analysis of sub-critical transmutation reactor concepts

International Nuclear Information System (INIS)

Chang, S. H.

1997-01-01

The long-lived nuclear wastes have been substantially generated from the light water reactor for a few decades. The toxicity of these spent fuels will be higher than that of the uranium ore, even if those will be stored in the repository more than ten thousands. Hence the means of transmuting the key long-lived nuclear wastes, primarily the minor actinides, using a hybrid proton accelerator and subcritical transmutation reactor, are proposed. Until now, the representative concepts for a subcritical transmutation reactor are the Energy Amplifier, the OMEGA project, the ATW and the MSBR. The detailed concepts and the specifications are illustrated in Table 1. The design requirements for the subcritical transmutation reactor are the high transmutation rate of long-lived nuclear wastes, safety and economics. And to propose the subcritical transmutation reactor concepts, the coolant, the target material and fuel type are carefully considered. In these aspects, the representative concepts for a subcritical transmutation reactor in Table 1 have been surveyed. The requirements for a target and a coolant are the reliable, low maintenance operation and safe operation to minimize the wastes. The reliable, low maintenance operation and safe operation to minimize the wastes. The reliable coolant must have the low melting point, high heat capacity and excellent physical properties. And the target material must have high neutron yield for a given proton condition and easy heat removal capability. Therefore in respect with the above requirements, Pb-Bi is proposed as the coolant and the target material for the subcritical reactor. Because the neutron yield for a given proton energy increases linearly with mass number up to bismuth but in heavier elements spallation events sharply increase both the neutron and heat outputs, Pb-Bi meets not only such the requirements as the above for the coolant but also those for the coolant and target, the simplification of system can be achieved
Status of data testing of ENDF/B-V reactor dosimetry file

International Nuclear Information System (INIS)

Magurno, B.A.

1979-01-01

The ENDF/B-V Reactor Dosimetry File was released August 1979, and Phase II data testing started. The results presented here are from Brookhaven National Laboratory only, and are considered preliminary. The tests include calculated spectrum-averaged cross sections using 235 U fission spectrum (Watt), 252 Cf spontaneous fission spectrum (Watt and Maxwellian), and the Coupled Fast Reactor Measurement Facility (CFRMF) spectrum. 6 tables
Generic Procedures for Response to a Nuclear or Radiological Emergency at Triga Research Reactors. Attachment 1 (2011)

International Nuclear Information System (INIS)

2011-01-01

The publication provides guidance for response to emergencies at TRIGA research reactors in Threat Category II and III. It contains information on the unique behaviour of TRIGA fuel during accident conditions; it describes design characteristics of TRIGA research reactors and provides specific symptom-based emergency classification for this type of research reactor. This publication covers the determination of the appropriate emergency class and protective actions for a nuclear or radiological emergency at TRIGA research reactors. It does not cover nuclear security at TRIGA research reactors. The term 'threat category' is used in this publication as described in Ref. [6] and for the purposes of emergency preparedness and response only; this usage does not imply that any threat, in the sense of an intention and capability to cause harm, has been made in relation to facilities, activities or sources. The threat category is determined by an analysis of potential nuclear and radiological emergencies and the associated radiation hazard that could arise as a consequence of those emergencies. STRUCTURE. The attachment consists of an introduction which defines the background, objective, scope and structure, two sections covering technical aspects and appendices. Section 2 describes the characteristics of TRIGA fuel in normal and accident conditions. Section 3 contains TRIGA research reactor specific emergency classification tables for Threat Category II and III. These tables should be used instead of the corresponding emergency classification tables presented in Ref. [1] while developing the emergency response arrangements at TRIGA research reactors. The appendices present some historical overview and typical general data for TRIGA research reactor projects and the list of TRIGA installations around the world. The terms used in this document are defined in the IAEA Safety Glossary and the IAEA Code of Conduct on the Safety of Research Reactors.
Reactor-specific spent fuel discharge projections: 1986 to 2020

International Nuclear Information System (INIS)

Heeb, C.M.; Walling, R.C.; Purcell, W.L.

1987-03-01

The creation of five reactor-specific spent fuel data bases that contain information on the projected amounts of spent fuel to be discharged from US commercial nuclear reactors through the year 2020 is described. The data bases contain detailed spent-fuel information from existing, planned, and projected pressurized water reactors (PWR) and boiling water reactors (BWR). The projections are based on individual reactor information supplied by the US reactor owners. The basic information is adjusted to conform to Energy Information Agency (EIA) forecasts for nuclear installed capacity, generation, and spent fuel discharged. The EIA cases considered are: (1) No new orders with extended burnup, (2) No new orders with constant burnup, (3) Upper reference (which assumes extended burnup), (4) Upper reference with constant burnup, and (5) Lower reference (which assumes extended burnup). Detailed, by-reactor tables are provided for annual discharged amounts of spent fuel, for storage requirements assuming maximum-at-reactor storage, and for storage requirements assuming maximum-at-reactor plus intra-utility transshipment of spent fuel. 6 refs., 8 figs., 8 tabs
Cool covered sky-splitting spectrum-splitting FK

Energy Technology Data Exchange (ETDEWEB)

Mohedano, Rubén; Chaves, Julio; Falicoff, Waqidi; Hernandez, Maikel; Sorgato, Simone [LPI, Altadena, CA, USA and Madrid (Spain); Miñano, Juan C.; Benitez, Pablo [LPI, Altadena, CA, USA and Madrid, Spain and Universidad Politécnica de Madrid (UPM), Madrid (Spain); Buljan, Marina [Universidad Politécnica de Madrid (UPM), Madrid (Spain)

2014-09-26

Placing a plane mirror between the primary lens and the receiver in a Fresnel Köhler (FK) concentrator gives birth to a quite different CPV system where all the high-tech components sit on a common plane, that of the primary lens panels. The idea enables not only a thinner device (a half of the original) but also a low cost 1-step manufacturing process for the optics, automatic alignment of primary and secondary lenses, and cell/wiring protection. The concept is also compatible with two different techniques to increase the module efficiency: spectrum splitting between a 3J and a BPC Silicon cell for better usage of Direct Normal Irradiance DNI, and sky splitting to harvest the energy of the diffuse radiation and higher energy production throughout the year. Simple calculations forecast the module would convert 45% of the DNI into electricity.
Bad split during bilateral sagittal split osteotomy of the mandible with separators: a retrospective study of 427 patients.

Science.gov (United States)

Mensink, Gertjan; Verweij, Jop P; Frank, Michael D; Eelco Bergsma, J; Richard van Merkesteyn, J P

2013-09-01

An unfavourable fracture, known as a bad split, is a common operative complication in bilateral sagittal split osteotomy (BSSO). The reported incidence ranges from 0.5 to 5.5%/site. Since 1994 we have used sagittal splitters and separators instead of chisels for BSSO in our clinic in an attempt to prevent postoperative hypoaesthesia. Theoretically an increased percentage of bad splits could be expected with this technique. In this retrospective study we aimed to find out the incidence of bad splits associated with BSSO done with splitters and separators. We also assessed the risk factors for bad splits. The study group comprised 427 consecutive patients among whom the incidence of bad splits was 2.0%/site, which is well within the reported range. The only predictive factor for a bad split was the removal of third molars at the same time as BSSO. There was no significant association between bad splits and age, sex, class of occlusion, or the experience of the surgeon. We think that doing a BSSO with splitters and separators instead of chisels does not increase the risk of a bad split, and is therefore safe with predictable results. Copyright © 2012 The British Association of Oral and Maxillofacial Surgeons. Published by Elsevier Ltd. All rights reserved.
Evaluation and In-House Validation of Five DNA Extraction Methods for PCR-based STR Analysis of Bloodstained Denims

Directory of Open Access Journals (Sweden)

Henry Perdigon

2004-06-01

Full Text Available One type of crime scene evidence commonly submitted for analysis is bloodstain on denim. However, chemicals (e.g., indigo used to produce denim materials may co-purify with DNA and hence, affect subsequent DNA analysis. The present study compared five methods (e.g., standard organic, organic with hydrogen peroxide (H2O2, modified FTA™, organic/Chelex®-Centricon®, and QIAamp® DNA Mini Kit-based procedures for the isolation of blood DNA from denim. A Short Tandem Repeat (STR-based analysis across two to nine STR markers, namely, HUMvWA, HUMTH01, D8S306, HUMFES/FPS, HUMDHFRP2, HUMF13A01, HUMFGA, HUMTPOX, and HUMCSF1PO, was used to evaluate successful amplification of blood DNA extracted from light indigo, dark indigo, indigo-sulfur, pure indigo, sulfur-top, and sulfur-bottom denim materials. The results of the present study support the utility of organic/Chelex®-Centricon® and QIAamp® Kit procedures in extracting PCR-amplifiable DNA from five different types of denim materials for STR analysis. Furthermore, a solid-based method using FTA™ classic cards was modified to provide a simple, rapid, safe, and cost-effective procedure for extracting blood DNA from light, dark indigo and pure indigo denim materials. However, DNA eluted from bloodstained sulfur-dyed denims (e.g., sulfur-top and sulfur-bottom using FTA™ procedure was not readily amplifiable.
TableMaker: An Excel Macro for Publication-Quality Tables

Directory of Open Access Journals (Sweden)

Marek Hlavac

2016-04-01

Full Text Available This article introduces TableMaker, a Microsoft Excel macro that produces publicationquality tables and includes them as new sheets in workbooks. The macro provides an intuitive graphical user interface that allows for the full customization of all table features. It also allows users to save and load table templates, and thus allows layouts to be both reproducible and transferable. It is distributed in a single computer file. As such, the macro is easy to share, as well as accessible to even beginning and casual users of Excel. Since it allows for the quick creation of reproducible and fully customizable tables, TableMaker can be very useful to academics, policy-makers and businesses by making the presentation and formatting of results faster and more efficient.
Relevant thermal hydraulic aspects of advanced reactors design: status report

International Nuclear Information System (INIS)

1996-11-01

This status report provides an overview on the relevant thermalhydraulic aspects of advanced reactor designs (e.g. ABWR, AP600, SBWR, EPR, ABB 80+, PIUS, etc.). Since all of the advanced reactor concepts are at the design stage, the information and data available in the open literature are still very limited. Some characteristics of advanced reactor designs are provided together with selected phenomena identification and ranking tables. Specific needs for thermalhydraulic codes together with the list of relevant and important thermalhydraulic phenomena for advanced reactor designs are summarized with the purpose of providing some guidance in development of research plans for considering further code development and assessment needs and for the planning of experimental programs
Wear plates control rod guide tubes top internal reactor vessel C. N. VANDELLOS II

International Nuclear Information System (INIS)

2010-01-01

The guide tubes for control rods forming part of the upper internals of the reactor vessel, its function is to guide the control rod to permit its insertion in the reactor core. These guide tubes are suspended from the upper support plate which are fixed by bolts and extending to the upper core plate which is fastened by clamping bolts (split pin) to prevent lateral displacement of the guide tubes, while allowing axial expansion.
Geometrical splitting in Monte Carlo

International Nuclear Information System (INIS)

Dubi, A.; Elperin, T.; Dudziak, D.J.

1982-01-01

A statistical model is presented by which a direct statistical approach yielded an analytic expression for the second moment, the variance ratio, and the benefit function in a model of an n surface-splitting Monte Carlo game. In addition to the insight into the dependence of the second moment on the splitting parameters the main importance of the expressions developed lies in their potential to become a basis for in-code optimization of splitting through a general algorithm. Refs
Innovative wedge axe in making split firewood

International Nuclear Information System (INIS)

Mutikainen, A.

1998-01-01

Interteam Oy, a company located in Espoo, has developed a new method for making split firewood. The tools on which the patented System Logmatic are based are wedge axe and cylindrical splitting-carrying frame. The equipment costs about 495 FIM. The block of wood to be split is placed inside the upright carrying frame and split in a series of splitting actions using the innovative wedge axe. The finished split firewood remains in the carrying frame, which (as its name indicates) also serves as the means for carrying the firewood. This innovative wedge-axe method was compared with the conventional splitting of wood using an axe (Fiskars -handy 1400 splitting axe costing about 200 FIM) in a study conducted at TTS-Institute. There were eight test subjects involved in the study. In the case of the wedge-axe method, handling of the blocks to be split and of the finished firewood was a little quicker, but in actual splitting it was a little slower than the conventional axe method. The average productivity of splitting the wood and of the work stages related to it was about 0.4 m 3 per effective hour in both methods. The methods were also equivalent of one another in terms of the load imposed by the work when measured in terms of the heart rate. As regards work safety, the wedge-axe method was superior to the conventional method, but the continuous striking action and jolting transmitted to the arms were unpleasant (orig.)
Mortality table construction

Science.gov (United States)

Sutawanir

2015-12-01

Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.
TMD splitting functions in kT factorization. The real contribution to the gluon-to-gluon splitting

International Nuclear Information System (INIS)

Hentschinski, M.; Kusina, A.; Kutak, K.; Serino, M.

2018-01-01

We calculate the transverse momentum dependent gluon-to-gluon splitting function within k T -factorization, generalizing the framework employed in the calculation of the quark splitting functions in Hautmann et al. (Nucl Phys B 865:54-66, arXiv:1205.1759, 2012), Gituliar et al. (JHEP 01:181, arXiv:1511.08439, 2016), Hentschinski et al. (Phys Rev D 94(11):114013, arXiv:1607.01507, 2016) and demonstrate at the same time the consistency of the extended formalism with previous results. While existing versions of k T factorized evolution equations contain already a gluon-to-gluon splitting function i.e. the leading order Balitsky-Fadin-Kuraev-Lipatov (BFKL) kernel or the Ciafaloni-Catani-Fiorani-Marchesini (CCFM) kernel, the obtained splitting function has the important property that it reduces both to the leading order BFKL kernel in the high energy limit, to the Dokshitzer-Gribov-Lipatov-Altarelli-Parisi (DGLAP) gluon-to-gluon splitting function in the collinear limit as well as to the CCFM kernel in the soft limit. At the same time we demonstrate that this splitting kernel can be obtained from a direct calculation of the QCD Feynman diagrams, based on a combined implementation of the Curci-Furmanski-Petronzio formalism for the calculation of the collinear splitting functions and the framework of high energy factorization. (orig.)
Thermophysical properties of copper compounds in copper-chlorine thermochemical water splitting cycles

International Nuclear Information System (INIS)

Zamfirescu, C.; Dincer, I.; Naterer, G.F.

2009-01-01

This paper examines the relevant thermophysical properties of compounds of chlorine and copper that are found in thermochemical water splitting cycles. There are four variants of such Cu-Cl cycles that use heat and electricity to split the water molecule and produce H 2 and O 2 . Since the energy input is mainly in the form of thermal energy, the Cu-Cl water splitting cycle is much more efficient than water electrolysis, if the electricity generation efficiency for electrolysis is taken into account. A number of copper compounds (Cu 2 OCl 2 , CuO, CuCl 2 , CuCl) and other chemicals (Cu, HCl) are recycled within the plant, while the overall effect is splitting of the water molecule. The system includes a number of chemical reactors, heat exchangers, spray dryer and electrochemical cell. This paper identifies the available experimental data for properties of copper compounds relevant to the Cu-Cl cycle analysis and design. It also develops new regression formulas to correlate the properties, which include: specific heat, enthalpy, entropy, Gibbs free energy, density, formation enthalpy and free energy. No past literature data is available for the viscosity and thermal conductivity of molten CuCl, so estimates are provided. The properties are evaluated at 1 bar and a range of temperatures from ambient to 675-1000K, which are consistent with the operating conditions of the cycle. Updated calculations of chemical exergies are provided as follows: 21.08, 6.268, 82.474, and 75.0 kJ/mol for Cu 2 OCl 2 , CuO, CuCl 2 and CuCl, respectively. For molten CuCl, the estimated viscosity varies from 2.6 to 1.7mPa.s. (author)
TABLE TENNIS CLUB

CERN Document Server

TABLE TENNIS CLUB

2010-01-01

2010 CERN Table Tennis Tournament The CERN Table Tennis Club organizes its traditional CERN Table Tennis Tournament, at the Meyrin club, 2 rue de livron, in Meyrin, Saturday August 21st, in the afternoon. The tournament is open to all CERN staff, users, visitors and families, including of course summer students. See below for details. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You can also download the registration form from the Club Web page (http://www.cern.ch/tabletennis), and send it via internal mail. Photo taken on August 22, 2009 showing some of the participants in the 2nd CERN Table Tennis tournament. INFORMATION ON CERN TABLE TENNIS CLUB CERN used to have a tradition of table tennis activities at CERN. For some reason, at the beginning of the 1980’s, the CERN Table Tennis club merged with the Meyrin Table Tennis club, a member of the Association Genevoise de Tennis de Table (AGTT). Therefore, if you want to practice table tennis, you...

Theoretical analysis of nuclear reactors (Phase I), I-V, Part III, Reactor poisoning

International Nuclear Information System (INIS)

Pop-Jordanov, J.

1962-07-01

Method was developed for calculation of Xe 135 static effect and kinetic effects of Xe 135 and Sm 149 with separate treatment of iodine effect and influence of reactor poisoning during power increase. Mentioned effects are treated first for uranium fuel and then the basic formulae were generalized for a mixture of fissile material. The annex contains a table with data needed for calculations and the Xe 13 5 microscopic capture cross section dependent on temperature [sr
High-temperature gas-cooled reactor (HTGR): long term program plan

International Nuclear Information System (INIS)

1980-01-01

The FY 1980 effort was to investigate four technology options identified by program participants as potentially viable candidates for near-term demonstration: the Gas Turbine system (HTGR-GT), reflecting its perceived compatibility with the dry-cooling market, two systems addressing the process heat market, the Reforming (HTGR-R) and Steam Cycle (HTGR-SC) systems, and a more developmental reactor system, The Nuclear Heat Source Demonstration Reactor (NHSDR), which was to serve as a basis for both the HTGR-GT and HTGR-R systems as well as the further potential for developing advanced applications such as steam-coal gasification and water splitting
Urban pattern: Layout design by hierarchical domain splitting

KAUST Repository

Yang, Yongliang; Wang, Jun; Vouga, Etienne; Wonka, Peter

2013-01-01

We present a framework for generating street networks and parcel layouts. Our goal is the generation of high-quality layouts that can be used for urban planning and virtual environments. We propose a solution based on hierarchical domain splitting using two splitting types: streamline-based splitting, which splits a region along one or multiple streamlines of a cross field, and template-based splitting, which warps pre-designed templates to a region and uses the interior geometry of the template as the splitting lines. We combine these two splitting approaches into a hierarchical framework, providing automatic and interactive tools to explore the design space.
Urban pattern: Layout design by hierarchical domain splitting

KAUST Repository

Yang, Yongliang

2013-11-06

We present a framework for generating street networks and parcel layouts. Our goal is the generation of high-quality layouts that can be used for urban planning and virtual environments. We propose a solution based on hierarchical domain splitting using two splitting types: streamline-based splitting, which splits a region along one or multiple streamlines of a cross field, and template-based splitting, which warps pre-designed templates to a region and uses the interior geometry of the template as the splitting lines. We combine these two splitting approaches into a hierarchical framework, providing automatic and interactive tools to explore the design space.
L-Reactor operation, Savannah River Plant: environmental assessment

International Nuclear Information System (INIS)

1982-08-01

The purpose of this document is to assess the significance of the effects on the human environment of the proposed resumption of L-reactor operation at the Savannah River Plant, scheduled for October 1983. The discussion is presented under the following section headings: need for resumption of L-Reactor operations and purpose of this environmental assessment; proposed action and alternative; affected environment (including, site location and description, land use, historic and archeological resources, socioeconomic and community characteristics, geology and seismology, hydrology, meteorology and climatology, ecology, and radiation environment); environmental consequences; summary of projected L-Reactor releases and impacts; and Federal and State permits and approval. The three appendices are entitled: radiation dose calculation methods and assumptions; floodplain/wetlands assessment - L-Reactor operations; and, conversion table. A list of references is included at the end of each chapter
[The haplomatch program for comparing Y-chromosome STR-haplotypes and its application to the analysis of the origin of Don Cossacks].

Science.gov (United States)

Chukhryaeva, M I; Ivanov, I O; Frolova, S A; Koshel, S M; Utevska, O M; Skhalyakho, R A; Agdzhoyan, A T; Bogunov, Yu V; Balanovska, E V; Balanovsky, O P

2016-05-01

STR haplotypes of the Y chromosome are widely used as effective genetic markers in studies of human populations and in forensic DNA analysis. The task often arises to compare the spectrum of haplotypes in individuals or entire populations. Performing this task manually is too laborious and thus unrealistic. We propose an algorithm for counting similarity between STR haplotypes. This algorithm is suitable for massive analyses of samples. It is implemented in the computer program Haplomatch, which makes it possible to find haplotypes that differ from the target haplotype by 0, 1, 2, 3, or more mutational steps. The program may operate in two modes: comparison of individuals and comparison of populations. Flexibility of the program (the possibility of using any external database), its usability (MS Excel spreadsheets are used), and the capability of being applied to other chromosomes and other species could make this software a new useful tool in population genetics and forensic and genealogical studies. The Haplomatch software is freely available on our website www.genofond.ru. The program is applied to studying the gene pool of Cossacks. Experimental analysis of Y-chromosomal diversity in a representative set (N = 131) of Upper Don Cossacks is performed. Analysis of the STR haplotypes detects genetic proximity of Cossacks to East Slavic populations (in particular, to Southern and Central Russians, as well as to Ukrainians), which confirms the hypothesis of the origin of the Cossacks mainly due to immigration from Russia and Ukraine. Also, a small genetic influence of Turkicspeaking Nogais is found, probably caused by their occurrence in the Don Voisko as part of the Tatar layer. No similarities between haplotype spectra of Cossacks and Caucasus populations are found. This case study demonstrates the effectiveness of the Haplomatch software in analyzing large sets of STR haplotypes.
Analysis of Environmental Data During TRIGA 2000 Reactor Operation in PTNBR-BATAN Bandung

International Nuclear Information System (INIS)

Zulfakhri

2009-01-01

The radioactivity data of grass and soil obtained from environmental monitoring during 2000-2008 have been quantitatively and qualitatively analyzed. The data were analyzed using statistical method of the population homogeneity varians test and the average equality test, whereas qualitative analysis have been carried out by gamma spectrometry. From the data analysis, using homogeneity varians test (X 2 test) and average equality test (F test) it was obtained that X 2 calculation , F calculation > X 2 table , F table , so it can be assumed that operation of TRIGA 2000 reactor has no effect to the radioactivity of the environment. The qualitative analysis of grass and soil samples shows no visible peak of gamma ray from fission or activation products from the reactor, but the natural radionuclide such as 214 Bi, 228 Ac, 212 Bi, and 40 K were detected. It can be concluded that reactor operation have no effect to the environmental radioactivity. (author)
Reactor Network Synthesis Using Coupled Genetic Algorithm with the Quasi-linear Programming Method

OpenAIRE

Soltani, H.; Shafiei, S.; Edraki, J.

2016-01-01

This research is an attempt to develop a new procedure for the synthesis of reactor networks (RNs) using a genetic algorithm (GA) coupled with the quasi-linear programming (LP) method. The GA is used to produce structural configuration, whereas continuous variables are handled using a quasi-LP formulation for finding the best objective function. Quasi-LP consists of LP together with a search loop to find the best reactor conversions (xi), as well as split and recycle ratios (yi). Quasi-LP rep...
Identification of the sequence variations of 15 autosomal STR loci in a Chinese population.

Science.gov (United States)

Chen, Wenjing; Cheng, Jianding; Ou, Xueling; Chen, Yong; Tong, Dayue; Sun, Hongyu

2014-01-01

DNA sequence variation including base(s) changes and insertion or deletion in the primer binding region may cause a null allele and, if this changes the length of the amplified fragment out of the allelic ladder, off-ladder (OL) alleles may be detected. In order to provide accurate and reliable DNA evidence for forensic DNA analysis, it is essential to clarify sequence variations in prevalently used STR loci. Suspected null alleles and OL alleles of PlowerPlex16® System from 21,934 unrelated Chinese individuals were verified by alternative systems and sequenced. A total of 17 cases with null alleles were identified, including 12 kinds of point mutations in 16 cases and a 19-base deletion in one case. The total frequency of null alleles was 7.751 × 10(-4). Eight hundred and forty-four OL alleles classified as being of 97 different kinds were observed at 15 STR loci of the PowerPlex®16 system except vWA. All the frequencies of OL alleles were under 0.01. Null alleles should be confirmed by alternative primers and OL alleles should be named appropriately. Particular attention should be paid to sequence variation, since incorrect designation could lead to false conclusions.
10 CFR 51.52 - Environmental effects of transportation of fuel and waste-Table S-4.

Science.gov (United States)

2010-01-01

... 10 Energy 2 2010-01-01 2010-01-01 false Environmental effects of transportation of fuel and waste... Environmental effects of transportation of fuel and waste—Table S-4. Under § 51.50, every environmental report... detailed analysis of the environmental effects of transportation of fuel and wastes to and from the reactor...
Relationship between mandibular anatomy and the occurrence of a bad split upon sagittal split osteotomy.

Science.gov (United States)

Aarabi, Mohammadali; Tabrizi, Reza; Hekmat, Mina; Shahidi, Shoaleh; Puzesh, Ayatollah

2014-12-01

A bad split is a troublesome complication of the sagittal split osteotomy (SSO). The aim of this study was to evaluate the relation between the occurrence of a bad split and mandibular anatomy in SSO using cone-beam computed tomography. The authors designed a cohort retrospective study. Forty-eight patients (96 SSO sites) were studied. The buccolingual thickness of the retromandibular area (BLR), the buccolingual thickness of the ramus at the level of the lingula (BLTR), the height of the mandible from the alveolar crest to the inferior border of the mandible, (ACIB), the distance between the sigmoid notch and the inferior border of the mandible (SIBM), and the anteroposterior width of the ramus (APWR) were measured. The independent t test was applied to compare anatomic measurements between the group with and the group without bad splits. The receiver operating characteristic (ROC) test was used to find a cutoff point in anatomic size for various parts of the mandible related to the occurrence of bad splits. The mean SIBM was 47.05±6.33 mm in group 1 (with bad splits) versus 40.66±2.44 mm in group 2 (without bad splits; P=.01). The mean BLTR was 5.74±1.11 mm in group 1 versus 3.19±0.55 mm in group 2 (P=.04). The mean BLR was 14.98±2.78 mm in group 1 versus 11.21±1.29 mm in group 2 (P=.001). No statistically significant difference was found for APWR and ACIB between the 2 groups. The ROC test showed cutoff points of 10.17 mm for BLR, 36.69 mm for SIBM, and 4.06 mm for BLTR. This study showed that certain mandibular anatomic differences can increase the risk of a bad split during SSO surgery. Copyright © 2014 American Association of Oral and Maxillofacial Surgeons. Published by Elsevier Inc. All rights reserved.
SplitRacer - a new Semi-Automatic Tool to Quantify And Interpret Teleseismic Shear-Wave Splitting

Science.gov (United States)

Reiss, M. C.; Rumpker, G.

2017-12-01

We have developed a semi-automatic, MATLAB-based GUI to combine standard seismological tasks such as the analysis and interpretation of teleseismic shear-wave splitting. Shear-wave splitting analysis is widely used to infer seismic anisotropy, which can be interpreted in terms of lattice-preferred orientation of mantle minerals, shape-preferred orientation caused by fluid-filled cracks or alternating layers. Seismic anisotropy provides a unique link between directly observable surface structures and the more elusive dynamic processes in the mantle below. Thus, resolving the seismic anisotropy of the lithosphere/asthenosphere is of particular importance for geodynamic modeling and interpretations. The increasing number of seismic stations from temporary experiments and permanent installations creates a new basis for comprehensive studies of seismic anisotropy world-wide. However, the increasingly large data sets pose new challenges for the rapid and reliably analysis of teleseismic waveforms and for the interpretation of the measurements. Well-established routines and programs are available but are often impractical for analyzing large data sets from hundreds of stations. Additionally, shear wave splitting results are seldom evaluated using the same well-defined quality criteria which may complicate comparison with results from different studies. SplitRacer has been designed to overcome these challenges by incorporation of the following processing steps: i) downloading of waveform data from multiple stations in mseed-format using FDSNWS tools; ii) automated initial screening and categorizing of XKS-waveforms using a pre-set SNR-threshold; iii) particle-motion analysis of selected phases at longer periods to detect and correct for sensor misalignment; iv) splitting analysis of selected phases based on transverse-energy minimization for multiple, randomly-selected, relevant time windows; v) one and two-layer joint-splitting analysis for all phases at one station by
Elekta Precise Table characteristics of IGRT remote table positioning

International Nuclear Information System (INIS)

Riis, Hans L.; Zimmermann, Sune J.

2009-01-01

Cone beam CT is a powerful tool to ensure an optimum patient positioning in radiotherapy. When cone beam CT scan of a patient is acquired, scan data of the patient are compared and evaluated against a reference image set and patient position offset is calculated. Via the linac control system, the patient is moved to correct for position offset and treatment starts. This procedure requires a reliable system for movement of patient. In this work we present a new method to characterize the reproducibility, linearity and accuracy in table positioning. The method applies to all treatment tables used in radiotherapy. Material and methods. The table characteristics are investigated on our two recent Elekta Synergy Platforms equipped with Precise Table installed in a shallow pit concrete cavity. Remote positioning of the table uses the auto set-up (ASU) feature in the linac control system software Desktop Pro R6.1. The ASU is used clinically to correct for patient positioning offset calculated via cone beam CT (XVI)-software. High precision steel rulers and a USB-microscope has been used to detect the relative table position in vertical, lateral and longitudinal direction. The effect of patient is simulated by applying external load on the iBEAM table top. For each table position an image is exposed of the ruler and display values of actual table position in the linac control system is read out. The table is moved in full range in lateral direction (50 cm) and longitudinal direction (100 cm) while in vertical direction a limited range is used (40 cm). Results and discussion. Our results show a linear relation between linac control system read out and measured position. Effects of imperfect calibration are seen. A reproducibility within a standard deviation of 0.22 mm in lateral and longitudinal directions while within 0.43 mm in vertical direction has been observed. The usage of XVI requires knowledge of the characteristics of remote table positioning. It is our opinion
Decommissioning of multiple-reactor stations: facilitation by sequential decommissioning

International Nuclear Information System (INIS)

Moore, E.B.; Smith, R.I.; Wittenbrock, N.G.

1982-01-01

Reductions in cost and radiation dose can be achieved for decommissionings at multiple reactor stations because of factors not necessarily present at a single reactor station: reactors of similar design, the opportunity for sequential decommissioning, a site dedicated to nuclear power generation, and the option of either interim or permanent low-level radioactive waste storage facilities onsite. The cost and radiation dose reductions occur because comprehensive decommissioning planning need only be done once, because the labor force is stable and need only be trained once, because there is less handling of radioactive wastes, and because central stores, equipment, and facilities may be used. The cost and radiation dose reductions are sensitive to the number and types of reactors on the site, and to the alternatives selected for decommissioning. 3 tables
Second-generation sequencing of forensic STRs using the Ion Torrent™ HID STR 10-plex and the Ion PGM™

DEFF Research Database (Denmark)

Fordyce, Sarah L; Mogensen, Helle Smidt; Børsting, Claus

2015-01-01

Second-generation sequencing (SGS) using Roche/454 and Illumina platforms has proved capable of sequencing the majority of the key forensic genetic STR systems. Given that Roche has announced that the 454 platforms will no longer be supported from 2015, focus should now be shifted to competing SGS...... platforms, such as the MiSeq (Illumina) and the Ion Personal Genome Machine (Ion PGM™; Thermo Fisher). There are currently several challenges faced with amplicon-based SGS STR typing in forensic genetics, including current lengths of amplicons for CE-typing and lack of uniform data analysis between......) analysis of sensitivity; (3) typing of mixtures; and (4) typing of biological crime case samples. Full profiles and concordant results between replicate SGS runs and CE-typing were observed for all control samples. Full profiles were seen with DNA input down to 50pg, with the exception of a single locus...
Neutron and gamma characterization within the FFTF reactor cavity

International Nuclear Information System (INIS)

Bunch, W.L.; Carter, L.L.; Moore, F.S.; Werner, E.J.; Wilcox, A.D.; Wood, M.R.

1980-08-01

Neutron and gamma ray measurements were made within the reactor cavity of the Fast Flux Test Facility (FFTF) to establish the operating characteristics of the Ex-Vessel Flux Monitoring (EVFM) system as a function of reactor power level. A significant effort was made to obtain absolute flux values in order that the measurements could be compared directly with shield design calculations. Good agreement was achieved for neutrons and for both the prompt and delayed components of the gamma ray field. 8 figures, 3 tables
AcuTable

DEFF Research Database (Denmark)

Dibbern, Simon; Rasmussen, Kasper Vestergaard; Ortiz-Arroyo, Daniel

2017-01-01

In this paper we describe AcuTable, a new tangible user interface. AcuTable is a shapeable surface that employs capacitive touch sensors. The goal of AcuTable was to enable the exploration of the capabilities of such haptic interface and its applications. We describe its design and implementation...
Main safety lessons from 5-year operation of the renovated Dalat nuclear research reactor

International Nuclear Information System (INIS)

Anh, T.H.; Lam, P.V.; An, T.K.; Khang, N.P.; Tan, D.Q.

1989-01-01

The paper presents main safety related characteristics of the Dalat Nuclear Research Reactor (DNRR), which was reconstructed in 1982 at the site of the former TRIGA Mark II, while retaining some of its structures. Experience acquired from reactor operation is analysed. The programme of investigations aimed at better ensuring nuclear safety of the reactor, together with some of its results are presented. Finally some propositions to improve the present situation are suggested. (Authors). (2 Tables, 2 fig.)
Regional Quasi-Three-Dimensional Unsaturated-Saturated Water Flow Model Based on a Vertical-Horizontal Splitting Concept

Directory of Open Access Journals (Sweden)

Yan Zhu

2016-05-01

Full Text Available Due to the high nonlinearity of the three-dimensional (3-D unsaturated-saturated water flow equation, using a fully 3-D numerical model is computationally expensive for large scale applications. A new unsaturated-saturated water flow model is developed in this paper based on the vertical/horizontal splitting (VHS concept to split the 3-D unsaturated-saturated Richards’ equation into a two-dimensional (2-D horizontal equation and a one-dimensional (1-D vertical equation. The horizontal plane of average head gradient in the triangular prism element is derived to split the 3-D equation into the 2-D equation. The lateral flow in the horizontal plane of average head gradient represented by the 2-D equation is then calculated by the water balance method. The 1-D vertical equation is discretized by the finite difference method. The two equations are solved simultaneously by coupling them into a unified nonlinear system with a single matrix. Three synthetic cases are used to evaluate the developed model code by comparing the modeling results with those of Hydrus1D, SWMS2D and FEFLOW. We further apply the model to regional-scale modeling to simulate groundwater table fluctuations for assessing the model applicability in complex conditions. The proposed modeling method is found to be accurate with respect to measurements.
Verification of the LWRARC code for light-water-reactor afterheat rate calculations

International Nuclear Information System (INIS)

Murphy, B.D.

1998-02-01

This report describes verification studies carried out on the LWRARC (Light-Water-Reactor Afterheat Rate Calculations) computer code. The LWRARC code is proposed for automating the implementation of procedures specified in Draft Revision 1 of the U.S. Nuclear Regulatory Commission (NRC) Regulatory Guide 3.54, open-quotes Spent-Fuel Heat Generation in an Independent Spent-Fuel Storage Installation,close quotes which gives guidelines on the calculation of decay heat for spent nuclear fuel. Draft Regulatory Guide 3.54 allows one to estimate decay-heat values by means of a table lookup procedure with interpolation performed between table-entry values. The tabulated values of the relevant parameters span ranges that are appropriate for spent fuel from a boiling-water reactor (BWR) or a pressurized-water reactor (PWR), as the case may be, and decay-heat rates are obtained for spent fuel whose properties are within those parameter limits. In some instances, where these limits are either exceeded or where they approach critical regions, adjustments are invoked following table lookup. The LWRARC computer code is intended to replicate the manual process just described. In the code, the table lookup is done by entering a database and carrying out interpolations. The code then determines if adjustments apply, and, if this is the case, adjustment factors are calculated separately. The manual procedures in the Draft Regulatory Guide have been validated (i.e., they produce results that are good estimates of reality). The work reported in this document verifies that the LWRARC code replicates the manual procedures of the Draft Regulatory Guide, and that the code, taken together with the Draft Regulatory Guide, can support both verification and validation processes

Development of the 16 X-STR loci typing system and genetic analysis in a Shanghai Han population from China.

Science.gov (United States)

Sun, Kuan; Zhao, Shumin; Tian, Huaizhou; Zhang, Suhua; Li, Chengtao

2013-11-01

This study developed a new multiplex PCR system that simultaneously amplifies 16 X-STR loci in the same PCR reaction, and the polymorphism and mutation rates of these 16 X-STR loci were explored in a Shanghai Han population from China. These loci included DXS10134, DXS10159, DXS6789, DXS6795, DXS6800, DXS6803, DXS6807, DXS6810, DXS7132, DXS7424, DXS8378, DXS9902, GATA165B12, GATA172D05, GATA31E08, and HPRTB. Samples from 591 unrelated individuals (293 males and 298 females) and 400 two-generation families were successfully analyzed using this multiplex system. Allele frequencies and mutation rates of the 16 loci were investigated, with the comparison of allele frequency distributions among different populations performed. Polymorphism information contents of these loci were all >0.6440 except the locus DXS6800 (0.4706). Nine cases of mutations were detected in the 16 loci from the investigation of 9232 meioses. Pairwise comparisons of allele frequency distributions showed significant differences for most loci among populations from different countries and ethnic groups but not among the Han population living in other areas of China. These results suggest that the 16 X-STR loci system provides highly informative polymorphic data for paternity testing and forensic identification in the Han population in Shanghai, China, as a complementary tool. © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Phenomena identification and ranking tables (PIRT) for LBLOCA

International Nuclear Information System (INIS)

Shaw, R.A.; Dimenna, R.A.; Larson, T.K.; Wilson, G.E.

1988-01-01

The US Nuclear Regulatory Commission is sponsoring a program to provide validated reactor safety computer codes with quantified uncertainties. The intent is to quantify the accuracy of the codes for use in best estimate licensing applications. One of the tasks required to complete this program involves the identification and ranking of thermal-hydraulic phenomena that occur during particular accidents. This paper provides detailed tables of phenomena and importance ranks for a PWR LBLOCA. The phenomena were identified and ranked according to perceived impact on peak cladding temperature. Two approaches were used to complete this task. First, a panel of experts identified the physical processes considered to be most important during LBLOCA. A second team of experienced analysts then, in parallel, assembled complete tables of all plausible LBLOCA phenomena, regardless of perceived importance. Each phenomenon was then ranked in importance against every other phenomenon associated with a given component. The results were placed in matrix format and solved for the principal eigenvector. The results as determined by each method are presented in this report
Are Ducted Mini-Splits Worth It?

Energy Technology Data Exchange (ETDEWEB)

Winkler, Jonathan M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Maguire, Jeffrey B [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Metzger, Cheryn E. [Pacific Northwest National Laboratory; Zhang, Jason [Pacific Northwest National Laboratory

2018-02-01

Ducted mini-split heat pumps are gaining popularity in some regions of the country due to their energy-efficient specifications and their ability to be hidden from sight. Although product and install costs are typically higher than the ductless mini-split heat pumps, this technology is well worth the premium for some homeowners who do not like to see an indoor unit in their living area. Due to the interest in this technology by local utilities and homeowners, the Bonneville Power Administration (BPA) has funded the Pacific Northwest National Laboratory (PNNL) and the National Renewable Energy Laboratory (NREL) to develop capabilities within the Building Energy Optimization (BEopt) tool to model ducted mini-split heat pumps. After the fundamental capabilities were added, energy-use results could be compared to other technologies that were already in BEopt, such as zonal electric resistance heat, central air source heat pumps, and ductless mini-split heat pumps. Each of these technologies was then compared using five prototype configurations in three different BPA heating zones to determine how the ducted mini-split technology would perform under different scenarios. The result of this project was a set of EnergyPlus models representing the various prototype configurations in each climate zone. Overall, the ducted mini-split heat pumps saved about 33-60% compared to zonal electric resistance heat (with window AC systems modeled in the summer). The results also showed that the ducted mini-split systems used about 4% more energy than the ductless mini-split systems, which saved about 37-64% compared to electric zonal heat (depending on the prototype and climate).
Particulate photocatalysts for overall water splitting

Science.gov (United States)

Chen, Shanshan; Takata, Tsuyoshi; Domen, Kazunari

2017-10-01

The conversion of solar energy to chemical energy is a promising way of generating renewable energy. Hydrogen production by means of water splitting over semiconductor photocatalysts is a simple, cost-effective approach to large-scale solar hydrogen synthesis. Since the discovery of the Honda-Fujishima effect, considerable progress has been made in this field, and numerous photocatalytic materials and water-splitting systems have been developed. In this Review, we summarize existing water-splitting systems based on particulate photocatalysts, focusing on the main components: light-harvesting semiconductors and co-catalysts. The essential design principles of the materials employed for overall water-splitting systems based on one-step and two-step photoexcitation are also discussed, concentrating on three elementary processes: photoabsorption, charge transfer and surface catalytic reactions. Finally, we outline challenges and potential advances associated with solar water splitting by particulate photocatalysts for future commercial applications.
Socioeconomic consequences of nuclear reactor accidents

International Nuclear Information System (INIS)

Tawil, J.J.; Callaway, J.W.; Coles, B.L.; Cronin, F.J.; Currie, J.W.; Imhoff, K.L.; Lewis, P.M.; Nesse, R.J.; Strenge, D.L.

1984-06-01

This report identifies and characterizes the off-site socioeconomic consequences that would likely result from a severe radiological accident at a nuclear power plant. The types of impacts that are addressed include economic impacts, health impacts, social/psychological impacts and institutional impacts. These impacts are identified for each of several phases of a reactor accident - from the warning phase through the post-resettlement phase. The relative importance of the impact during each accident phase and the degree to which the impact can be predicted are indicated. The report also examines the methods that are currently used for assessing nuclear reactor accidents, including development of accident scenarios and the estimating of socioeconomic accident consequences with various models. Finally, a critical evaluation is made regarding the use of impact analyses in estimating the contribution of socioeconomic consequences to nuclear accident reactor accident risk. 116 references, 7 figures, 15 tables
Fusion-Fission hybrid reactors and nonproliferation

International Nuclear Information System (INIS)

Greenspan, E.

1984-09-01

New options for the development of the nuclear energy economy which might become available by a successful development of fusion-breeders or fusion-fission hybrid power reactors, identified and their nonproliferative attributes are discussed. The more promising proliferation-resistance ettributes identified include: (1) Justification for a significant delay in the initiation of fuel processing, (2) Denaturing the plutonium with 238 Pu before its use in power reactors of any kind, and (3) Making practical the development of denatured uranium fuel cycles and, in particular, denaturing the uranium with 232 U. Fuel resource utilization, time-table and economic considerations associated with the use of fusion-breeders are also discussed. It is concluded that hybrid reactors may enable developing a nuclear energy economy which is more proliferation resistant than possible otherwise, whileat the same time, assuring high utilization of t he uranium and thorium resources in an economically acceptable way. (author)
(O)Mega split

Energy Technology Data Exchange (ETDEWEB)

Benakli, Karim; Darmé, Luc; Goodsell, Mark D. [Sorbonne Universités, UPMC Univ Paris 06, UMR 7589,LPTHE, F-75005, Paris (France); CNRS, UMR 7589,LPTHE, F-75005, Paris (France)

2015-11-16

We study two realisations of the Fake Split Supersymmetry Model (FSSM), the simplest model that can easily reproduce the experimental value of the Higgs mass for an arbitrarily high supersymmetry scale M{sub S}, as a consequence of swapping higgsinos for equivalent states, fake higgsinos, with suppressed Yukawa couplings. If the LSP is identified as the main Dark matter component, then a standard thermal history of the Universe implies upper bounds on M{sub S}, which we derive. On the other hand, we show that renormalisation group running of soft masses aboveM{sub S} barely constrains the model — in stark contrast to Split Supersymmetry — and hence we can have a “Mega Split” spectrum even with all of these assumptions and constraints, which include the requirements of a correct relic abundance, a gluino life-time compatible with Big Bang Nucleosynthesis and absence of signals in present direct detection experiments of inelastic dark matter. In an appendix we describe a related scenario, Fake Split Extended Supersymmetry, which enjoys similar properties.
An algorithm for the split-feasibility problems with application to the split-equality problem.

Science.gov (United States)

Chuang, Chih-Sheng; Chen, Chi-Ming

2017-01-01

In this paper, we study the split-feasibility problem in Hilbert spaces by using the projected reflected gradient algorithm. As applications, we study the convex linear inverse problem and the split-equality problem in Hilbert spaces, and we give new algorithms for these problems. Finally, numerical results are given for our main results.
El subgénero Trigona S. Str. Jurine 1808 (Hymenoptera: Apidae: Meliponinae) en Colombia

OpenAIRE

Édgar Javier Hernández Martínez; Guiomar Nates Parra

2004-01-01

Para Colombia se registran 28 de los 29 taxones descritos para el subgénero Trigona s. str. T. (T.) albipennis Almeida, 1992; T. (T.) amalthea Olivier, 1789; T. (T.) hyalinata var. amazonensis Ducke, 1916; T. (T.) hyalinata var. branneri Cockerell, 1912; T. (T.) chanchamayoënsis Schwarz, 1948; T. (T.) cilipes Fabricius, 1804; T. (T.) corvina Cockerell, 1913; T. (T.) crassipes Fabricius, 1793; T. (T.) dallatorreana Friese, 1900; T. (T.) dimidiata var. venezuelana Schwarz, 1948; T. (T.) dimi...
El subgénero Trigona S. Str. Jurine 1808 (Hymenoptera: Apidae: Meliponinae) en Colombia

OpenAIRE

Hernández Martínez Édgar Javier; Nates Parra Guiomar

2004-01-01

Para Colombia se registran 28 de los 29 taxones descritos para el subgénero Trigona s. str. T. (T.) albipennis Almeida, 1992; T. (T.) amalthea Olivier, 1789; T. (T.) hyalinata var. amazonensis
Ducke, 1916; T. (T.) hyalinata var. branneri Cockerell, 1912; T. (T.) chanchamayoënsis Schwarz, 1948; T. (T.) cilipes Fabricius, 1804; T. (T.) corvina Cockerell, 1913; T. (T.) crassipes Fabricius, 1793; T. (T.) dallatorreana Friese, 1900; T. (T.) dimidiata var. venezuelana Schwarz, 1948; T. (...
Stochastic split determinant algorithms

International Nuclear Information System (INIS)

Horvatha, Ivan

2000-01-01

I propose a large class of stochastic Markov processes associated with probability distributions analogous to that of lattice gauge theory with dynamical fermions. The construction incorporates the idea of approximate spectral split of the determinant through local loop action, and the idea of treating the infrared part of the split through explicit diagonalizations. I suggest that exact algorithms of practical relevance might be based on Markov processes so constructed
M-Split: A Graphical User Interface to Analyze Multilayered Anisotropy from Shear Wave Splitting

Science.gov (United States)

Abgarmi, Bizhan; Ozacar, A. Arda

2017-04-01

Shear wave splitting analysis are commonly used to infer deep anisotropic structure. For simple cases, obtained delay times and fast-axis orientations are averaged from reliable results to define anisotropy beneath recording seismic stations. However, splitting parameters show systematic variations with back azimuth in the presence of complex anisotropy and cannot be represented by average time delay and fast axis orientation. Previous researchers had identified anisotropic complexities at different tectonic settings and applied various approaches to model them. Most commonly, such complexities are modeled by using multiple anisotropic layers with priori constraints from geologic data. In this study, a graphical user interface called M-Split is developed to easily process and model multilayered anisotropy with capabilities to properly address the inherited non-uniqueness. M-Split program runs user defined grid searches through the model parameter space for two-layer anisotropy using formulation of Silver and Savage (1994) and creates sensitivity contour plots to locate local maximas and analyze all possible models with parameter tradeoffs. In order to minimize model ambiguity and identify the robust model parameters, various misfit calculation procedures are also developed and embedded to M-Split which can be used depending on the quality of the observations and their back-azimuthal coverage. Case studies carried out to evaluate the reliability of the program using real noisy data and for this purpose stations from two different networks are utilized. First seismic network is the Kandilli Observatory and Earthquake research institute (KOERI) which includes long term running permanent stations and second network comprises seismic stations deployed temporary as part of the "Continental Dynamics-Central Anatolian Tectonics (CD-CAT)" project funded by NSF. It is also worth to note that M-Split is designed as open source program which can be modified by users for
STR-based genetic structure of the Berber population of Bejaia (Northern Algeria) and its relationships to various ethnic groups.

Science.gov (United States)

Amir, Nadir; Sahnoune, Mohamed; Chikhi, Lounes; Atmani, Djebbar

2015-12-10

Patterns of genetic variation in human populations have been described for decades. However, North Africa has received little attention and Algeria, in particular, is poorly studied, Here we genotyped a Berber-speaking population from Algeria using 15 short tandem repeat (STR) loci D8S1179, D21S11, D7S820, CSF1PO, D3S1358, TH01, D13S317, D16S539, D2S1338, D19S433, vWA, TPOX, D18S51, D5S818 and FGA from the commercially available AmpF/STR Identifiler kit. Altogether 150 unrelated North Algerian individuals were sampled across 10 administrative regions or towns from the Bejaia Wilaya (administrative district). We found that all of the STR loci met Hardy-Weinberg equilibrium expectations, after Bonferroni correction and that the Berber-speaking population of Bejaia presented a high level of observed heterozygosity for the 15 STR system (>0.7). Genetic parameters of forensic interest such as combined power of discrimination (PD) and combined probability of exclusion (PE) showed values higher than 0.999, suggesting that this set of STRs can be used for forensic studies. Our results were also compared to those published for 42 other human populations analyzed with the same set. We found that the Bejaia sample clustered with several North African populations but that some geographically close populations, including the Berber-speaking Mozabite from Algeria were closer to Near-Eastern populations. While we were able to detect some genetic structure among samples, we found that it was not correlated to language (Berber-speaking versus Arab-speaking) or to geography (east versus west). In other words, no significant genetic differences were found between the Berber-speaking and the Arab-speaking populations of North Africa. The genetic closeness of European, North African and Near-Eastern populations suggest that North Africa should be integrated in models aiming at reconstructing the demographic history of Europe. Similarly, the genetic proximity with sub-Saharan Africa is
Origen geno-geográfico de haplotipos STR del cromosoma Y en una muestra caucásico-mestiza y afrodescendiente de Colombia

Directory of Open Access Journals (Sweden)

Juan J. Yunis

2013-09-01

Full Text Available Introducción. Los haplotipos STR de cromosoma Y han sido ampliamente utilizados en estudios de poblaciones para establecer el origen de diversas poblaciones. Objetivo. Se analizaron haplotipos STR del cromosoma Y (8 loci en 134 afrodescendientes y caucásico-mestizos no relacionados de Colombia, para correlacionar el origen geográfico con los datos históricos, así como las relaciones genéticas y posibles patrones de mezcla. Materiales y métodos. Se analizaron los haplotipos STR del cromosoma Y mediante PCR seguidas de electroforesis en acrilamida, de 134 muestras de afrodescendientes y 137 muestras de caucásicos mestizos. Resultados. No se encontró evidencia de subestructuración de la población afrodescendiente. El 2,59 % de los haplotipos eran compartidos en los dos grupos analizados, con la posible existencia deflujo génico de caucásico-mestizos hacia los afrodescendientes. Conclusión. La población caucásico-mestiza colombiana se agrupa con otras poblaciones de la península Ibérica y Europa, mientras que la población afrodescendiente colombiana se agrupa conotras poblaciones africanas reportadas. doi: http://dx.doi.org/10.7705/biomedica.v33i3.807
Design of Seismic Test Rig for Control Rod Drive Mechanism of Jordan Research and Training Reactor

International Nuclear Information System (INIS)

Sun, Jongoh; Kim, Gyeongho; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Jong In

2014-01-01

The reactor assembly is submerged in a reactor pool filled with water and its reactivity is controlled by locations of four control absorber rods(CARs) inside the reactor assembly. Each CAR is driven by a stepping motor installed at the top of the reactor pool and they are connected to each other by a tie rod and an electromagnet. The CARs scram the reactor by de-energizing the electromagnet in the event of a safe shutdown earthquake(SSE). Therefore, the safety function of the control rod drive mechanism(CRDM) which consists of a drive assembly, tie rod and CARs is to drop the CAR into the core within an appropriate time in case of the SSE. As well known, the operability for complex equipment such as the CRDM during an earthquake is very hard to be demonstrated by analysis and should be verified through tests. One of them simulates the reactor assembly and the guide tube of the CAR, and the other one does the pool wall where the drive assembly is installed. In this paper, design of the latter test rig and how the test is performed are presented. Initial design of the seismic test rig and excitation table had its first natural frequency at 16.3Hz and could not represent the environment where the CRDM was installed. Therefore, experimental modal analyses were performed and an FE model for the test rig and table was obtained and tuned based on the experimental results. Using the FE model, the design of the test rig and table was modified in order to have higher natural frequency than the cutoff frequency. The goal was achieved by changing its center of gravity and the stiffness of its sliding bearings
Design of Seismic Test Rig for Control Rod Drive Mechanism of Jordan Research and Training Reactor

Energy Technology Data Exchange (ETDEWEB)

Sun, Jongoh; Kim, Gyeongho; Yoo, Yeonsik; Cho, Yeonggarp; Kim, Jong In [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

2014-05-15

The reactor assembly is submerged in a reactor pool filled with water and its reactivity is controlled by locations of four control absorber rods(CARs) inside the reactor assembly. Each CAR is driven by a stepping motor installed at the top of the reactor pool and they are connected to each other by a tie rod and an electromagnet. The CARs scram the reactor by de-energizing the electromagnet in the event of a safe shutdown earthquake(SSE). Therefore, the safety function of the control rod drive mechanism(CRDM) which consists of a drive assembly, tie rod and CARs is to drop the CAR into the core within an appropriate time in case of the SSE. As well known, the operability for complex equipment such as the CRDM during an earthquake is very hard to be demonstrated by analysis and should be verified through tests. One of them simulates the reactor assembly and the guide tube of the CAR, and the other one does the pool wall where the drive assembly is installed. In this paper, design of the latter test rig and how the test is performed are presented. Initial design of the seismic test rig and excitation table had its first natural frequency at 16.3Hz and could not represent the environment where the CRDM was installed. Therefore, experimental modal analyses were performed and an FE model for the test rig and table was obtained and tuned based on the experimental results. Using the FE model, the design of the test rig and table was modified in order to have higher natural frequency than the cutoff frequency. The goal was achieved by changing its center of gravity and the stiffness of its sliding bearings.
Advanced Fast Reactor - 100 (AFR-100) Report for the Technical Review Panel

Energy Technology Data Exchange (ETDEWEB)

Grandy, Christopher [Argonne National Lab. (ANL), Argonne, IL (United States); Sienicki, James J. [Argonne National Lab. (ANL), Argonne, IL (United States); Moisseytsev, Anton [Argonne National Lab. (ANL), Argonne, IL (United States); Krajtl, Lubomir [Argonne National Lab. (ANL), Argonne, IL (United States); Farmer, Mitchell T. [Argonne National Lab. (ANL), Argonne, IL (United States); Kim, Taek K. [Argonne National Lab. (ANL), Argonne, IL (United States); Middleton, B. [Argonne National Lab. (ANL), Argonne, IL (United States)

2014-06-04

This report is written to provide an overview of the Advanced Fast Reactor-100 in the requested format for a DOE technical review panel. This report was prepared with information that is responsive to the DOE Request for Information, DE-SOL-0003674 Advanced Reactor Concepts, dated February 27, 2012 from DOE’s Office of Nuclear Energy, Office of Nuclear Reactor Technologies. The document consists of two main sections. The first section is a summary of the AFR-100 design including the innovations that are incorporated into the design. The second section contains a series of tables that respond to the various questions requested of the reactor design team from the subject DOE RFI.
Dispersion strengthened ferritic alloy for use in liquid-metal fast breeder reactors (LMFBRS)

International Nuclear Information System (INIS)

Fischer, J.J.

1978-01-01

A dispersion-strengthened ferritic alloy is provided which has high-temperature strength and is readily fabricable at ambient temperatures, and which is useful as structural elements of liquid-metal fast breeder reactors. 4 tables
CERN Table Tennis Club

CERN Multimedia

CERN Table Tennis Club

2014-01-01

CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014 The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...
Olive fly (Bactrocera oleae) activity, fruit infestation and temperature in an organic table olive orchard in southern Crete

OpenAIRE

Volakakis, Mr N.; Eyre, Dr M.D.; Kabourakis, Dr E.; Leifert, Prof C.

2008-01-01

Olive fly activity and olive fruit infestation was monitored in a table olive orchard in southern Crete throughout most of 2006 using McPhail traps. Flies were trapped weekly for 40 weeks, starting at the beginning of February. The fly data was split into 10 four-week periods. Male, female and total fly activity was significantly related to sampling period, maximum temperature and relative humidity but the pattern of catches was not consistent. Activity increased from February until July but ...

STR analysis of human DNA from maggots fed on decomposing bodies: Assessment of the time period for successful analysis

Directory of Open Access Journals (Sweden)

Daniel Gachuiri Njau

2016-09-01

Full Text Available Frequently, forensic entomology is applied in the use of insect maggots for the identification of specimens or remains of humans. Maggot crop analysis could be valuable in criminal investigations when maggots are found at a crime scene and a corpse is absent. Human short tandem repeat (STR has previously been used to support the association of maggots to a specific corpse but not in the period at which the body has been decomposing. The aim of this research was to assess the time period for successful STR analyses of human DNA from third instar maggots (Protophormia terraenovae obtained from decomposing human corpses as well as to investigate the human DNA turnover and degradation in the maggot crop after they are removed from food and/or are fed on a beef (a new/different food source. Results showed that the amount of human DNA recovered from maggots decreased with time in all cases. For maggots fed on beef, the human DNA could only be recovered up to day two and up to day four for the starved maggots. STR analyses of human DNA from maggots’ crop content using 16 loci generated profiles that matched those of reference samples although some of the alleles were not amplifiable therefore generating partial profiles for the samples starved for 4 days and those fed on beef. This may be due to nuclease activity present in the gut of larvae that may have caused degradation of DNA and consequently reduction in DNA yield. It was possible to identify the decomposing body using STRs as markers.
Choroba Gerstmanna-Sträusslera-Scheinkera

Directory of Open Access Journals (Sweden)

Paweł P. Liberski

2011-04-01

Full Text Available Choroba Gerstmanna-Sträusslera-Scheinkera (GSS jest genetycznie uwarunkowaną chorobą wywoływaną przez priony. Jest ona unikalna, ponieważ udało się przepasażować GSS na naczelne i gryzonie przynajmniej z mózgu obarczonego mutacją kodonu 102. Tym samym jest to jedyne schorzenie jednocześnie genetycznie uwarunkowane i zakaźne, aczkolwiek natura czynnika infekcyjnego (prionu nadal stanowi przedmiot dyskusji. W obrazie klinicznym GSS dominuje postępująca ataksja móżdżkowa z towarzyszącym otępieniem i objawami piramidowo-pozapiramidowymi. Jest to jednak choroba heterogenna, o różnym obrazie klinicznym u nosicieli różnych mutacji, a nawet u nosicieli tej samej mutacji. Obraz neuropatologiczny obejmuje obecność PrPd – immunododatnich złogów amyloidu pod postacią blaszek, zwłaszcza tzw. blaszek wielordzeniowych. Istnieje kilka modeli GSS. U myszy transgenicznych z nadekspresją zmutowanego genu kodującego PrP obserwuje się spontaniczną chorobę zwyrodnieniową, pasażowalną na myszy transgeniczne o niskiej liczbie transgenu. U myszy transgenicznych uzyskanych drogą wzajemnej rekombinacji, a więc bez nadeskpresji, nie występuje choroba spontaniczna, niemniej stają się one wrażliwe na zakażenie GSS.
Population genetic data of the NGM SElect STR loci in Chinese Han population from Zhejiang region, China.

Science.gov (United States)

Zhou, Anju; Wu, Weiwei; Liu, Qiuling; Wu, Yeda; Lu, Dejian

2013-03-01

Genetic variations of the 17 NGM SElect STR loci in Chinese Han samples from the Zhejiang region were analyzed. The results show that the NGM SElect is a highly genetic informative system in Zhejiang Han, and this population shows quite different genetic data from other major populations in the world with the exception of the Fujian Han.
Additive operator-difference schemes splitting schemes

CERN Document Server

Vabishchevich, Petr N

2013-01-01

Applied mathematical modeling isconcerned with solving unsteady problems. This bookshows how toconstruct additive difference schemes to solve approximately unsteady multi-dimensional problems for PDEs. Two classes of schemes are highlighted: methods of splitting with respect to spatial variables (alternating direction methods) and schemes of splitting into physical processes. Also regionally additive schemes (domain decomposition methods)and unconditionally stable additive schemes of multi-component splitting are considered for evolutionary equations of first and second order as well as for sy
Alteration of split renal function during Captopril treatment

International Nuclear Information System (INIS)

Aburano, Tamio; Takayama, Teruhiko; Nakajima, Kenichi; Tonami, Norihisa; Hisada, Kinichi; Yasuhara, Shuichirou; Miyamori, Isamu; Takeda, Ryoyu

1987-01-01

Two different methods to evaluate the alteration of split renal function following continued Captopril treatment were studied in a total of 21 patients with hypertension. Eight patients with renovascular hypertension (five with unilateral renal artery stenosis and three with bilateral renal artery stenoses), three patients with diabetic nephropathy, one patient with primary aldosteronism, and nine patients with essential hypertension were included. The studies were performed the day prior to receiving Captopril (baseline), and 6th or 7th day following continued Captopril treatment (37.5 mg or 75 mg/day). Split effective renal plasma flow (ERPF) and glomerular filtration rate (GFR) after injections of I-131 hippuran and Tc-99m DTPA were measured using kidney counting corrected for depth and dose, described by Schlegel and Gates. In the patients with renovascular hypertension, split GFR in the stenotic kidney was significantly decreased 6th or 7th day following continued Captopril treatment compared to a baseline value. And split ERPF in the stenotic kidney was slightly increased although significant increase of split ERPF was not shown. In the patients with diabetic nephropathy, primary aldosteronism or essential hypertension, on the other hand, split GFR was not changed and split ERPF was slightly increased. These findings suggest that the Captopril induced alterations of split renal function may be of importance for the diagnosis of renovascular hypertension. For this purpose, split GFR determination is more useful than split ERPF determination. (author)
Spin Splitting in Different Semiconductor Quantum Wells

International Nuclear Information System (INIS)

Hao Yafei

2012-01-01

We theoretically investigate the spin splitting in four undoped asymmetric quantum wells in the absence of external electric field and magnetic field. The quantum well geometry dependence of spin splitting is studied with the Rashba and the Dresselhaus spin-orbit coupling included. The results show that the structure of quantum well plays an important role in spin splitting. The Rashba and the Dresselhaus spin splitting in four asymmetric quantum wells are quite different. The origin of the distinction is discussed in this work. (condensed matter: electronic structure, electrical, magnetic, and optical properties)
Nuclear Power Reactor simulator - based training program

International Nuclear Information System (INIS)

Abdelwahab, S.A.S.

2009-01-01

nuclear power stations will continue playing a major role as an energy source for electric generation and heat production in the world. in this paper, a nuclear power reactor simulator- based training program will be presented . this program is designed to aid in training of the reactor operators about the principles of operation of the plant. also it could help the researchers and the designers to analyze and to estimate the performance of the nuclear reactors and facilitate further studies for selection of the proper controller and its optimization process as it is difficult and time consuming to do all experiments in the real nuclear environment.this program is written in MATLAB code as MATLAB software provides sophisticated tools comparable to those in other software such as visual basic for the creation of graphical user interface (GUI). moreover MATLAB is available for all major operating systems. the used SIMULINK reactor model for the nuclear reactor can be used to model different types by adopting appropriate parameters. the model of each component of the reactor is based on physical laws rather than the use of look up tables or curve fitting.this simulation based training program will improve acquisition and retention knowledge also trainee will learn faster and will have better attitude
Splitting Ward identity

Energy Technology Data Exchange (ETDEWEB)

Safari, Mahmoud [Institute for Research in Fundamental Sciences (IPM), School of Particles and Accelerators, P.O. Box 19395-5531, Tehran (Iran, Islamic Republic of)

2016-04-15

Within the background-field framework we present a path integral derivation of the splitting Ward identity for the one-particle irreducible effective action in the presence of an infrared regulator, and make connection with earlier works on the subject. The approach is general in the sense that it does not rely on how the splitting is performed. This identity is then used to address the problem of background dependence of the effective action at an arbitrary energy scale. We next introduce the modified master equation and emphasize its role in constraining the effective action. Finally, application to general gauge theories within the geometric approach is discussed. (orig.)
Splitting Ward identity

International Nuclear Information System (INIS)

Safari, Mahmoud

2016-01-01

Within the background-field framework we present a path integral derivation of the splitting Ward identity for the one-particle irreducible effective action in the presence of an infrared regulator, and make connection with earlier works on the subject. The approach is general in the sense that it does not rely on how the splitting is performed. This identity is then used to address the problem of background dependence of the effective action at an arbitrary energy scale. We next introduce the modified master equation and emphasize its role in constraining the effective action. Finally, application to general gauge theories within the geometric approach is discussed. (orig.)
Účast D. Stránské na Soupisovém výzkumu NSČ

Czech Academy of Sciences Publication Activity Database

Motyčková, Dana

15[57]-16[58], - (1999), s. 99-102 ISSN 1211-8117. [Lidová kultura 20. století, její výzkum, dokumentace a prezentace. Věnováno 100. výročí narození doc. dr. Drahomíry Stránské. Rožnov pod Radhoštěm, 08.09.1999] Subject RIV: AC - Archeology, Anthropology, Ethnology
Validation of the AmpFlSTR« SEfiler Plus(TM) PCR Amplification kit for forensic STR analysis

DEFF Research Database (Denmark)

Fredslund, Stine Frisk; Mogensen, Helle Smidt; Morling, Niels

2009-01-01

Validation of the AmpFlSTR« SEfiler Plus(TM) PCR Amplification kit with 29 and 30 PCR cycles for forensic STR analysis demonstrated that the kit had fewer artefacts than the AmpFlSTR« SGM Plus(TM) kit (28 PCR cycles). The SEfiler Plus kit was more sensitive and devoid of colour artefacts, but sho......, but showed more stutters, drop-ins, drop-outs and allelic imbalances...
Pharmaceutical counselling about different types of tablet-splitting methods based on the results of weighing tests and mechanical development of splitting devices.

Science.gov (United States)

Somogyi, O; Meskó, A; Csorba, L; Szabó, P; Zelkó, R

2017-08-30

The division of tablets and adequate methods of splitting them are a complex problem in all sectors of health care. Although tablet-splitting is often required, this procedure can be difficult for patients. Four tablets were investigated with different external features (shape, score-line, film-coat and size). The influencing effect of these features and the splitting methods was investigated according to the precision and "weight loss" of splitting techniques. All four types of tablets were halved by four methods: by hand, with a kitchen knife, with an original manufactured splitting device and with a modified tablet splitter based on a self-developed mechanical model. The mechanical parameters (harness and friability) of the products were measured during the study. The "weight loss" and precision of splitting methods were determined and compared by statistical analysis. On the basis of the results, the external features (geometry), the mechanical parameters of tablets and the mechanical structure of splitting devices can influence the "weight loss" and precision of tablet-splitting. Accordingly, a new decision-making scheme was developed for the selection of splitting methods. In addition, the skills of patients and the specialties of therapy should be considered so that pharmaceutical counselling can be more effective regarding tablet-splitting. Copyright © 2017 Elsevier B.V. All rights reserved.
Iterative Splitting Methods for Differential Equations

CERN Document Server

Geiser, Juergen

2011-01-01

Iterative Splitting Methods for Differential Equations explains how to solve evolution equations via novel iterative-based splitting methods that efficiently use computational and memory resources. It focuses on systems of parabolic and hyperbolic equations, including convection-diffusion-reaction equations, heat equations, and wave equations. In the theoretical part of the book, the author discusses the main theorems and results of the stability and consistency analysis for ordinary differential equations. He then presents extensions of the iterative splitting methods to partial differential
2-Photon tandem device for water splitting

DEFF Research Database (Denmark)

Seger, Brian; Castelli, Ivano Eligio; Vesborg, Peter Christian Kjærgaard

2014-01-01

Within the field Of photocatalytic water splitting there are several strategies to achieve the goal of efficient and cheap photocatalytic water splitting. This work examines one particular strategy by focusing on monolithically stacked, two-photon photoelectrochemical cells. The overall aim...... for photocatalytic water splitting by using a large bandgap photocathode and a low bandgap photoanode with attached protection layers....
Modelling noise in second generation sequencing forensic genetics STR data using a one-inflated (zero-truncated) negative binomial model

DEFF Research Database (Denmark)

Vilsen, Søren B.; Tvedebrink, Torben; Mogensen, Helle Smidt

2015-01-01

We present a model fitting the distribution of non-systematic errors in STR second generation sequencing, SGS, analysis. The model fits the distribution of non-systematic errors, i.e. the noise, using a one-inflated, zero-truncated, negative binomial model. The model is a two component model...
Semi-strong split domination in graphs

Directory of Open Access Journals (Sweden)

Anwar Alwardi

2014-06-01

Full Text Available Given a graph $G = (V,E$, a dominating set $D subseteq V$ is called a semi-strong split dominating set of $G$ if $|V setminus D| geq 1$ and the maximum degree of the subgraph induced by $V setminus D$ is 1. The minimum cardinality of a semi-strong split dominating set (SSSDS of G is the semi-strong split domination number of G, denoted $gamma_{sss}(G$. In this work, we introduce the concept and prove several results regarding it.
Long-lived sodium activity from a fast reactor

Energy Technology Data Exchange (ETDEWEB)

Martini, M; Moioli, P; Romanelli, C M

1973-06-05

The /sup 23/Na(n,2n)/sup 22/Na cross section was measured in two different ways; the first in the TRIGA reactor, with the sodium sample surrounded by a natural boron shield, the second in the central channel of the TAPIRO reactor. Irradiated samples were investigated either to measure the /sup 23/ Na(n,2n)/sup 22/Na cross section or to determine the impurities present and their activation cross sections. Unsatisfactory results for the second problem suggested evaluation of the impurity activations by calculation; therefore, a set of group constants for reactions of interest was prepared. (3 figures, 3 tables) (auth)
Numerical investigation of a dual-loop EGR split strategy using a split index and multi-objective Pareto optimization

International Nuclear Information System (INIS)

Park, Jungsoo; Song, Soonho; Lee, Kyo Seung

2015-01-01

Highlights: • Model-based control of dual-loop EGR system is performed. • EGR split index is developed to provide non-dimensional index for optimization. • EGR rates are calibrated using EGR split index at specific operating conditions. • Multi-objective Pareto optimization is performed to minimize NO X and BSFC. • Optimum split strategies are suggested with LP-rich dual-loop EGR at high load. - Abstract: A proposed dual-loop exhaust-gas recirculation (EGR) system that combines the features of high-pressure (HP) and low-pressure (LP) systems is considered a key technology for improving the combustion behavior of diesel engines. The fraction of HP and LP flows, known as the EGR split, for a given dual-loop EGR rate play an important role in determining the engine performance and emission characteristics. Therefore, identifying the proper EGR split is important for the engine optimization and calibration processes, which affect the EGR response and deNO X efficiencies. The objective of this research was to develop a dual-loop EGR split strategy using numerical analysis and one-dimensional (1D) cycle simulation. A control system was modeled by coupling the 1D cycle simulation and the control logic. An EGR split index was developed to investigate the HP/LP split effects on the engine performance and emissions. Using the model-based control system, a multi-objective Pareto (MOP) analysis was used to minimize the NO X formation and fuel consumption through optimized engine operating parameters. The MOP analysis was performed using a response surface model extracted from Latin hypercube sampling as a fractional factorial design of experiment. By using an LP rich dual-loop EGR, a high EGR rate was attained at low, medium, and high engine speeds, increasing the applicable load ranges compared to base conditions
Users guide to the computer program FURST (FUture Reactor STrategies)

International Nuclear Information System (INIS)

Hatton, H.

1981-01-01

A program has been written to calculate the future resource requirements for the nuclear portion of an electricity generating system. Starting from a given total energy demand projection the program calculates the required growth of the electrical generating system, the total nuclear system, and the portion provided by reactors using an advanced fuel cycle by successive application of the Fisher/Pry penetration formula. Several options are available. These include the ability to (1) change the growth rates of any part of the system; (2) change the characteristics of the reactors; (3) include the effects of decommissioning reactors at the end of their design lifetimes; (4) vary the date of introduction of advanced reactors; and (5) limit the amount of natural uranium available annually. The output gives the history of the growth of the nuclear system and the uranium mining and fuel reprocessing requirements. The output can be obtained either as tables of numbers or graphs with crossplots to compare reactor systems or total energy scenarios. (author)
Status of October 1, 2004 of the repartition of nuclear reactors connected to the grid and under construction in the world

International Nuclear Information System (INIS)

2004-01-01

This document is a table giving the number of nuclear reactors connected to the grid and under construction in the European countries and in the rest of the world. The percentage of electricity produced by these reactors in 2003 is indicated. (J.S.)

Research Reactors Types and Utilization

International Nuclear Information System (INIS)

Abdelrazek, I.D.

2008-01-01

A nuclear reactor, in gross terms, is a device in which nuclear chain reactions are initiated, controlled, and sustained at a steady rate. The nuclei of fuel heavy atoms (mostly 235 U or 239 Pu), when struck by a slow neutron, may split into two or more smaller nuclei as fission products,releasing energy and neutrons in a process called nuclear fission. These newly-born fast neutrons then undergo several successive collisions with relatively low atomic mass material, the moderator, to become thermalized or slow. Normal water, heavy water, graphite and beryllium are typical moderators. These neutrons then trigger further fissions, and so on. When this nuclear chain reaction is controlled, the energy released can be used to heat water, produce steam and drive a turbine that generates electricity. The fission process, and hence the energy release, are controlled by the insertion (or extraction) of control rods through the reactor. These rods are strongly neutron absorbents, and thus only enough neutrons to sustain the chain reaction are left in the core. The energy released, mostly in the form of heat, should be continuously removed, to protect the core from damage. The most significant use of nuclear reactors is as an energy source for the generation of electrical power and for power in some military ships. This is usually accomplished by methods that involve using heat from the nuclear reaction to power steam turbines. Research reactors are used for radioisotope production and for beam experiments with free neutrons. Historically, the first use of nuclear reactors was the production of weapons grade plutonium for nuclear weapons. Currently all commercial nuclear reactors are based on nuclear fission. Fusion power is an experimental technology based on nuclear fusion instead of fission.
Splitting Functions at High Transverse Momentum

CERN Document Server

Moutafis, Rhea Penelope; CERN. Geneva. TH Department

2017-01-01

Among the production channels of the Higgs boson one contribution could become significant at high transverse momentum which is the radiation of a Higgs boson from another particle. This note focuses on the calculation of splitting functions and cross sections of such processes. The calculation is first carried out on the example $e\\rightarrow e\\gamma$ to illustrate the way splitting functions are calculated. Then the splitting function of $e\\rightarrow eh$ is calculated in similar fashion. This procedure can easily be generalized to processes such as $q\\rightarrow qh$ or $g\\rightarrow gh$.
Simplified polynomial representation of cross sections for reactor calculation

International Nuclear Information System (INIS)

Dias, A.M.; Sakai, M.

1985-01-01

It is shown a simplified representation of a cross section library generated by transport theory using the cell model of Wigner-Seitz for typical PWR fuel elements. The effect of burnup evolution through tables of reference cross sections and the effect of the variation of the reactor operation parameters considered by adjusted polynomials are presented. (M.C.K.) [pt
Conceptual design of ICF reactor SENRI, Part II. Advances in design and pellet gain scaling

International Nuclear Information System (INIS)

Ido, S.; Mima, K.; Nakai, S.; Tsuji, R.; Yamanaka, C.

1984-01-01

This chapter reviews the recent design studies on reactor concepts with magnetically guided lithium flow, SENRI-I, SENRI-IA and SENRI-II. The routes from the present status to power reactors and an advanced fuel pellet concept is also discussed. Topics covered include pellet design, magnetohydrodynamic design of liquid lithium flow; reactor cavity concepts with magnetically guided lithium flow, a thermo-hydraulic analysis, a tritium recovery system; and an advanced fuel pellet concept for an inertial confinement fusion (ICF) reactor without a tritium breeding blanket. An advanced fuel pellet for an ICF reactor without a T breeder was studied in the model calculations, which showed sufficiently high values of pellet gain. Includes a table and 8 diagrams
Neutrality of miniSTR D22S1045 marker by Ewing's sarcoma phenotype.

Science.gov (United States)

Silva, Deborah S B S; Raimann, Paulo E; Moro, Tatiane; Picanço, Juliane B; Abujamra, Ana L; de Farias, Caroline B; Roesler, Rafael; Brunetto, Algemir L; Alho, Clarice S

2013-11-01

Neutrality investigations of markers with forensic use are important to see if a phenotypic trait is being expressed in relation to the alleles of the marker. MiniSTR marker D22S1045 (locus 22q12.3) is localized near the breakpoint region of the EWS gene (22q12.2), which leads to the development of Ewing's Sarcoma. Analyzing allele frequencies and linkage disequilibrium in Ewing's sarcoma patients and non-affected populations, we found that the marker mD22S1045 was neutral when related to Ewing's Sarcoma. Copyright © 2013 Elsevier Ireland Ltd. All rights reserved.
Description of the advanced gas cooled type of reactor (AGR)

Energy Technology Data Exchange (ETDEWEB)

Nonboel, E. [Risoe National Lab., Roskilde (Denmark)

1996-11-01

The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: `Reactors in Nordic Surroundings`, which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs.
Description of the advanced gas cooled type of reactor (AGR)

International Nuclear Information System (INIS)

Nonboel, E.

1996-11-01

The present report comprises a technical description of the Advanced Gas cooled Reactor (AGR), a reactor type which has only been built in Great Britain. 14 AGR reactors have been built, located at 6 different sites and each station is supplied with twin-reactors. The Torness AGR plant on the Lothian coastline of Scotland, 60 km east of Edinburgh, has been chosen as the reference plant and is described in some detail. Data on the other 6 stations, Dungeness B, Hinkely Point B, Hunterston G, Hartlepool, Heysham I and Heysham II, are given only in tables with a summary of design data. Where specific data for Torness AGR has not been available, corresponding data from other AGR plans has been used, primarily from Heysham II, which belongs to the same generation of AGR reactors. The information presented is based on the open literature. The report is written as a part of the NKS/RAK-2 subproject 3: 'Reactors in Nordic Surroundings', which comprises a description of nuclear power plants neighbouring the Nordic countries. (au) 11 refs
SplitRacer - a semi-automatic tool for the analysis and interpretation of teleseismic shear-wave splitting

Science.gov (United States)

Reiss, Miriam Christina; Rümpker, Georg

2017-04-01

We present a semi-automatic, graphical user interface tool for the analysis and interpretation of teleseismic shear-wave splitting in MATLAB. Shear wave splitting analysis is a standard tool to infer seismic anisotropy, which is often interpreted as due to lattice-preferred orientation of e.g. mantle minerals or shape-preferred orientation caused by cracks or alternating layers in the lithosphere and hence provides a direct link to the earth's kinematic processes. The increasing number of permanent stations and temporary experiments result in comprehensive studies of seismic anisotropy world-wide. Their successive comparison with a growing number of global models of mantle flow further advances our understanding the earth's interior. However, increasingly large data sets pose the inevitable question as to how to process them. Well-established routines and programs are accurate but often slow and impractical for analyzing a large amount of data. Additionally, shear wave splitting results are seldom evaluated using the same quality criteria which complicates a straight-forward comparison. SplitRacer consists of several processing steps: i) download of data per FDSNWS, ii) direct reading of miniSEED-files and an initial screening and categorizing of XKS-waveforms using a pre-set SNR-threshold. iii) an analysis of the particle motion of selected phases and successive correction of the sensor miss-alignment based on the long-axis of the particle motion. iv) splitting analysis of selected events: seismograms are first rotated into radial and transverse components, then the energy-minimization method is applied, which provides the polarization and delay time of the phase. To estimate errors, the analysis is done for different randomly-chosen time windows. v) joint-splitting analysis for all events for one station, where the energy content of all phases is inverted simultaneously. This allows to decrease the influence of noise and to increase robustness of the measurement
Male DNA under female fingernails after scratching: transfer and persistence evaluation by RT-PCR analysis and Y-STR typing.

Science.gov (United States)

Iuvaro, Alessandra; Bini, Carla; Dilloo, Silvia; Sarno, Stefania; Pelotti, Susi

2018-04-17

The collection of biological debris beneath fingernails can be useful in forensic casework when a struggle between the victim and the offender is suspected. In the present study, we set up a controlled scratching experiment in which female volunteers scratched the male volunteers' forearms, simulating a defensive action during an assault. A total of 160 fingernail samples were collected: 80 "control samples" before the scratching, 40 samples immediately after the scratching (t = 0 h), and 40 samples 5 h after the scratching (t = 5 h). The aim was to evaluate, using a real-time PCR approach and Y-STR profiling, the transfer and the persistence of male DNA under female fingernails after scratching. A significant reduction in DNA yield was observed between fingernail samples collected immediately and those collected 5 h after scratching, with a corresponding decrease in Y-STR profile quality. Overall, 38/40 (95%) of the fingernail samples collected immediately (t = 0 h) and 24/40 (60%) of those collected 5 h later (t = 5 h) were suitable for comparison and the scratched male volunteers could not be excluded as donors of the foreign DNA from 37 (92.5%) of the t = 0 h and from 10 (25%) of the t = 5 h profiles. The analysis of male DNA under female fingernails showed that Y-chromosome STR typing may provide extremely valuable genetic information of the male contributor(s), although 5 h after scratching the profile of the scratched male was lost in three-quarters of samples.
A Global Assessment of Fast Reactors in the Future

International Nuclear Information System (INIS)

Devezeaux de Lavergne, J-G.; Mathonnière, G.

2013-01-01

Conclusions: • Fast reactors are the only way to fully achieve nuclear sustainability. • The SFR market cannot exist if a recycling market is not already present. • SFR has many other advantages that clearly outwheight the disadvantages (this trend is increasing). • Large data uncertainties (on uranium resources, world nuclear fleet deployment) return the little precise period at which economic competitiveness will be reached. Anyway, it is most likely to occur sometime in the second half of the century. • However, the market will start earlier, as it is splitted in two phases: before and after the economic competitiveness (this event is in fact country-dependant): – In the first phase 0-2 reactors will be built every year; – In the second phase up to 10-15 reactors will be built every year. • It is rather probable that there will be no more than two or three different Gen IV technologies in the world, because of the market size
Tabled Execution in Scheme

Energy Technology Data Exchange (ETDEWEB)

Willcock, J J; Lumsdaine, A; Quinlan, D J

2008-08-19

Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.
Generalized field-splitting algorithms for optimal IMRT delivery efficiency

Energy Technology Data Exchange (ETDEWEB)

Kamath, Srijit [Department of Radiation Oncology, University of Florida, Gainesville, FL (United States); Sahni, Sartaj [Department of Computer and Information Science and Engineering, University of Florida, Gainesville, FL (United States); Li, Jonathan [Department of Radiation Oncology, University of Florida, Gainesville, FL (United States); Ranka, Sanjay [Department of Computer and Information Science and Engineering, University of Florida, Gainesville, FL (United States); Palta, Jatinder [Department of Radiation Oncology, University of Florida, Gainesville, FL (United States)

2007-09-21

Intensity-modulated radiation therapy (IMRT) uses radiation beams of varying intensities to deliver varying doses of radiation to different areas of the tissue. The use of IMRT has allowed the delivery of higher doses of radiation to the tumor and lower doses to the surrounding healthy tissue. It is not uncommon for head and neck tumors, for example, to have large treatment widths that are not deliverable using a single field. In such cases, the intensity matrix generated by the optimizer needs to be split into two or three matrices, each of which may be delivered using a single field. Existing field-splitting algorithms used the pre-specified arbitrary split line or region where the intensity matrix is split along a column, i.e., all rows of the matrix are split along the same column (with or without the overlapping of split fields, i.e., feathering). If three fields result, then the two splits are along the same two columns for all rows. In this paper we study the problem of splitting a large field into two or three subfields with the field width as the only constraint, allowing for an arbitrary overlap of the split fields, so that the total MU efficiency of delivering the split fields is maximized. Proof of optimality is provided for the proposed algorithm. An average decrease of 18.8% is found in the total MUs when compared to the split generated by a commercial treatment planning system and that of 10% is found in the total MUs when compared to the split generated by our previously published algorithm. For more information on this article, see medicalphysicsweb.org.
Analysis of 17 STR data on 5362 southern Portuguese individuals-an update on reference database.

Science.gov (United States)

Cabezas Silva, Raquel; Ribeiro, Teresa; Lucas, Isabel; Porto, Maria João; Costa Santos, Jorge; Dario, Paulo

2016-03-01

The main objective of this work consisted of the updating of allele frequencies and other relevant forensic parameters for the 17 autosomal STR loci provided by the combination of the two types of kits used routinely in our laboratory casework: AmpF/STR Identifiler(®) and the Powerplex(®) 16 Systems. This aim was of significant importance, given that the last study on these kits within the southern Portuguese population dates back to 2006, and, as a consequence, it was necessary to correct the deviation caused by population evolution over the last ten years so that they might be better applied to our forensic casework. For this reason genetic data from 5362 unrelated Caucasian Portuguese individuals from the south of Portugal who were involved in paternity testing casework from 2005 to 2014 was used. Of all the markers, TPOX proved to be the least polymorphic, and Penta E the most. Secondly, this up-to-date southern Portuguese population was compared not only with the northern and central Portuguese populations, but also with that of southern Portugal in 2006, along with populations from Spain, Italy, Greece, Romania, Morocco, Angola and Korea in order to infer information about the relatedness of these respective populations, and the variation of the southern Portuguese population over time. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.
Y-STR variation in the Basque diaspora in the Western USA: evolutionary and forensic perspectives.

Science.gov (United States)

Valverde, Laura; Rosique, Melania; Köhnemann, Stephan; Cardoso, Sergio; García, Ainara; Odriozola, Adrián; Aznar, Jose María; Celorrio, David; Schuerenkamp, Marianne; Zubizarreta, Josu; Davis, Michael C; Hampikian, Greg; Pfeiffer, Heidi; de Pancorbo, Marian M

2012-03-01

Individuals of Basque origin migrated in large numbers to the Western USA in the second half of the nineteenth century, and the flow continued with less intensity during the last century. The European source population, that of the Basque Country, has long been a cultural and geographical isolate. Previous studies have demonstrated that Y-STR frequencies of Basques are different from those of other Spanish and European populations [1]. The Basque diaspora in the Western USA is a recent migration, but the founder effect and the incorporation of new American Y chromosomes into the paternal genetic pool of the Basque diaspora could have influenced its genetic structure and could thus have practical implications for forensic genetics. To check for genetic substructure among the European source and Basque diaspora populations and determine the most suitable population database for the Basque diaspora in the Western USA, we have analysed the haplotype distribution of 17 Y-STRs in both populations. We have found that the Basque diaspora in the Western USA largely conserve the Y chromosome lineage characteristic of the autochthonous European Basque population with no statistically significant differences. This implies that a common 17 Y-STR Basque population database could be used to calculate identification or kinship parameters regardless of whether the Basque individuals are from the European Basque Country or from the Basque diaspora in the Western USA.
Genetic polymorphism of 23 Y-STR loci in the Zhuang minority population in Guangxi of China.

Science.gov (United States)

Luo, Haibo; Song, Feng; Zhang, Lushun; Hou, Yiping

2015-07-01

In the present study, 23 Y-STR loci (DYS576, DYS389I, DYS389 II, DYS448, DYS19, DYS391, DYS481, DYS549, DYS533, DYS438, DYS437, DYS570, DYS635, DYS390, DYS439, DYS392, DYS393, DYS458 DYS456, DYS643, YGATAH4, and DYS385ab) were investigated in 266 unrelated, healthy autochthonous individuals from the Zhuang minority population residing in the Guangxi Zhuang Autonomous Region, China. One hundred and eighty-nine alleles and 245 haplotypes were found in the Zhuang group. Two hundred and twenty-four haplotypes among them were unique, and the remaining 21 haplotypes were found in two individuals. Discrimination capacity was 0.9211. Haplotype diversity was 0.9993 and gene diversity ranged from 0.4173 (DYS437) to 0.9678 (DYS385ab). Populations' differentia was calculated and compared with Tibetan, Bai, Dai, Minnan Han, Beijing Han, Chengdu Han, Xuanwei Han, and Southern Han ethnic groups in China, the Singapore Han population, and the Kinh group from Ho Chi Minh City, Vietnam, in the same 23 Y-STR loci. Our results showed that these 23 Y-STRs are highly genetically polymorphic in the Zhuang group and can also enrich Chinese ethnic genetic information.
Radioactive decay data tables: a handbook of decay data for application to radiation dosimetry and radiological assessments

International Nuclear Information System (INIS)

Kocher, D.C.

1982-01-01

Reviews compendium containing recommended decay data for approx. 500 radionuclides of interest in nuclear medicine and fusion reactor technology or of potential importance in routine or accidental releases from the nuclear fuel cycle. Primary source of the decay data presented in this handbook is the Evaluated Nuclear Structure Data File (ENSDF), developed and maintained by the US Nuclear Data Network. Topics covered include various radioactive decay processes; evaluation process and standards of ENSDF; tables and computer code MEDLIST used to produce ENSDF tables; radiation dosimetry and radiological assessments; parent-daughter activity ratios wherever the adopted decay data may contain significant uncertainties or errors due to the lack of appropriate experimental data
Split-plot fractional designs: Is minimum aberration enough?

DEFF Research Database (Denmark)

Kulahci, Murat; Ramirez, Jose; Tobias, Randy

2006-01-01

Split-plot experiments are commonly used in industry for product and process improvement. Recent articles on designing split-plot experiments concentrate on minimum aberration as the design criterion. Minimum aberration has been criticized as a design criterion for completely randomized fractional...... factorial design and alternative criteria, such as the maximum number of clear two-factor interactions, are suggested (Wu and Hamada (2000)). The need for alternatives to minimum aberration is even more acute for split-plot designs. In a standard split-plot design, there are several types of two...... for completely randomized designs. Consequently, we provide a modified version of the maximum number of clear two-factor interactions design criterion to be used for split-plot designs....
Symbol Tables and Branch Tables: Linking Applications Together

Science.gov (United States)

Handler, Louis M.

2011-01-01

This document explores the computer techniques used to execute software whose parts are compiled and linked separately. The computer techniques include using a branch table or indirect address table to connect the parts. Methods of storing the information in data structures are discussed as well as differences between C and C++.
Influence of P-Reactor operation on the aquatic ecology of Par Pond: a literature review

International Nuclear Information System (INIS)

Wilde, E.W.; Tilly, L.J.

1985-02-01

Par Pond is a 1012 hectare reservoir that was constructed in 1958 to provide cooling water for Savannah River nuclear reactors. The purpose of this report is to summarize all known studies on the Par Pond system and point out demonstrable or probable effects that can be correlated with reactor operations. Reactor operation effects the Par Pond ecosystem through: (1) pumping, (2) thermal alteration, and (3) the addition of Savannah River makeup water. The influence of each of these factors is discussed. 108 references, 24 figures, 34 tables. (MF)
Topical problems connected with the German act on electricity from renewable energy sources (StrEG)

International Nuclear Information System (INIS)

Pohlmann, M.

1998-01-01

The German act (StrEG) intended to enhance the use of renewable energy sources for electricity generation and to promote the relevant technologies raises some problems in connection with constitutional law that still await judicial review by the German Federal Constitutional Court. In addition, doubts as to the lawfulness of provisions of the act have been emerging in connection with EC laws governing the regime of subsidies and state aid. The article here summarizes the current situation. (orig./CB) [de

EC-FP7 ARCAS: technical and economical comparison of Fast Reactors and Accelerator Driven Systems for transmutation of Minor Actinides

International Nuclear Information System (INIS)

Van den Eynde, G.; Romanello, V.; Heek, A. van; Martin-Fuertes, F.; Zimmerman, C.; Lewin, B.

2015-01-01

The ARCAS project aims to compare, on a technological and economical basis, Accelerator Driven Systems and Fast Reactors as Minor Actinide burners. It is split in five work packages: the reference scenario definition, the fast reactor system definition, the accelerator driven system definition, the fuel reprocessing and fabrication facilities definition and the economical comparison. This paper summarizes the status of the project and its five work packages. (author)
Thermodynamic properties of mineral compounds (tables); Proprietes thermodynamiques des composes mineraux (tables)

Energy Technology Data Exchange (ETDEWEB)

Perrot, P. [Lille-1 Univ., Lab. de Metallurgie Physique, UMR CNRS 8517, 59 - Villeneuve-d' Ascq (France)

2005-10-01

This article presents, in the form of tables, the thermodynamic data necessary for the calculation of equilibrium constants of reactions between mineral compounds (Rb, Re, Ru, S, Sb, Sc, Se, Si, Sm, Sn, Sr, Ta, Tb, Tc, Te, Th, Ti, Tl, Tm, U, V, W, Xe, Y, Yb, Zn, and Zr compounds). Table 1 presents the data recommended by Codata; table 2 gives the minimum informations allowing the calculation of an equilibrium constant in first approximation; table 3 allows to take into consideration the thermal capacities. Finally, table 4 gathers the data relative to species in aqueous solution. (J.S.)
26 CFR 1.7872-15 - Split-dollar loans.

Science.gov (United States)

2010-04-01

...'s death benefit proceeds, the policy's cash surrender value, or both. (ii) Payments that are only... regarding certain split-dollar term loans payable on the death of an individual, certain split-dollar term... insurance arrangement make a representation—(i) Requirement. An otherwise noncontingent payment on a split...
Development of hydraulic analysis code for optimizing thermo-chemical is process reactors

International Nuclear Information System (INIS)

Terada, Atsuhiko; Hino, Ryutaro; Hirayama, Toshio; Nakajima, Norihiro; Sugiyama, Hitoshi

2007-01-01

The Japan Atomic Energy Agency has been conducting study on thermochemical IS process for water splitting hydrogen production. Based on the test results and know-how obtained through the bench-scale test, a pilot test plant, which has a hydrogen production performance of 30 Nm 3 /h, is being designed conceptually as the next step of the IS process development. In design of the IS pilot plant, it is important to make chemical reactors compact with high performance from the viewpoint of plant cost reduction. A new hydraulic analytical code has been developed for optimizing mixing performance of multi-phase flow involving chemical reactions especially in the Bunsen reactor. Complex flow pattern with gas-liquid chemical interaction involving flow instability will be characterized in the Bunsen reactor. Preliminary analytical results obtained with above mentioned code, especially flow patterns induced by swirling flow agreed well with that measured by water experiments, which showed vortex breakdown pattern in a simplified Bunsen reactor. (author)
Fuel elements for high temperature reactors having special suitability for reuse of the structural graphite

International Nuclear Information System (INIS)

Huschka, H.; Herrmann, F.J.

1976-01-01

There are prepared fuel elements for high temperature reactors from which the fuel zone can be removed from the structural graphite after the burnup of the fissile material has taken place so that the fuel element can be filled with new fuel and again placed in the reactor by having the strength of the matrix in the fuel zone sufficient for binding the embedded coated fuel particles but substantially less than the strength of the structural graphite whereby by the action of force it can be easily split up without destroying the particles
A guiding oblique osteotomy cut to prevent bad split in sagittal split ramus osteotomy: a technical note

Directory of Open Access Journals (Sweden)

Gururaj Arakeri

2015-06-01

Full Text Available Aim: To present a simple technical modification of a medial osteotomy cut which prevents its misdirection and overcomes various anatomical variations as well as technical problems. Methods: The medial osteotomy cut is modified in the posterior half at an angle of 15°-20° following novel landmarks. Results: The proposed cut exclusively directs the splitting forces downwards to create a favorable lingual fracture, preventing the possibility of an upwards split which would cause a coronoid or condylar fracture. Conclusion: This modification has proven to be successful to date without encountering the complications of a bad split or nerve damage.
Splitting and non splitting are pollution models photochemical reactions in the urban areas of greater Tehran area

International Nuclear Information System (INIS)

Heidarinasab, A.; Dabir, B.; Sahimi, M.; Badii, Kh.

2003-01-01

During the past years, one of the most important problems has been air pollution in urban areas. In this regards, ozone, as one of the major products of photochemical reactions, has great importance. The term 'photochemical' is applied to a number of secondary pollutants that appear as a result of sun-related reactions, ozone being the most important one. So far various models have been suggested to predict these pollutants. In this paper, we developed the model that has been introduced by Dabir, et al. [4]. In this model more than 48 chemical species and 114 chemical reactions are involved. The result of this development, showed good to excellent agreement across the region for compounds such as O 3 , NO, NO 2 , CO, and SO 2 with regard to VOC and NMHC. The results of the simulation were compared with previous work [4] and the effects of increasing the number of components and reactions were evaluated. The results of the operator splitting method were compared with non splitting solving method. The result showed that splitting method with one-tenth time step collapsed with non splitting method (Crank-Nicolson, under-relaxation iteration method without splitting of the equation terms). Then we developed one dimensional model to 3-D and were compared with experimental data
Calculational-experimental examination and ensuring of equipment and pipelines seismic resistance at starting and operating water-cooled and moderated reactor WWER-type NPPs shake table investigation at Paks NPP. Final report from 15 June 1993 - 15 June 1994

International Nuclear Information System (INIS)

Kaznovsky, S.

1995-01-01

This final report involves the calculation and experimental examination and ensuring the seismic resistance of the reactor equipment and pipelines at start up and operation of WWER type nuclear power plants. Shake table experiments performed at the Paks NPP are included. Namely the following devices of the emergency cooling system were tested: pump of low pressure; valve of low pressure; intermediate heat exchanger. The following values were determined: natural frequencies and vibration decrements and the main modes of normal vibrations for the heat exchanger
Concordance study and population frequencies for 16 autosomal STRs analyzed with PowerPlex(®) ESI 17 and AmpFℓSTR(®) NGM SElect™ in Somalis, Danes and Greenlanders

OpenAIRE

Tomas Mas, Carmen; Mogensen, H S; Friis, S L; Hallenberg, C; Stene, M C; Morling, N

2014-01-01

A concordance study of the results of PowerPlex(®) ESI 17 and AmpFℓSTR(®) NGM SElect™ kits obtained from 591 individuals from Somalia (N=198), Denmark (N=199) and Greenland (N=194) was performed. Among 9456 STR types, seven discordant results were found with the two kits: one observed in the D19S433 system in an individual from Denmark and six in the SE33 system in six individuals from Somalia. Sequencing of SE33 in the six samples with discordant results showed G>A transition 15bp downstr...
Stochastic solution of population balance equations for reactor networks

International Nuclear Information System (INIS)

Menz, William J.; Akroyd, Jethro; Kraft, Markus

2014-01-01

This work presents a sequential modular approach to solve a generic network of reactors with a population balance model using a stochastic numerical method. Full-coupling to the gas-phase is achieved through operator-splitting. The convergence of the stochastic particle algorithm in test networks is evaluated as a function of network size, recycle fraction and numerical parameters. These test cases are used to identify methods through which systematic and statistical error may be reduced, including by use of stochastic weighted algorithms. The optimal algorithm was subsequently used to solve a one-dimensional example of silicon nanoparticle synthesis using a multivariate particle model. This example demonstrated the power of stochastic methods in resolving particle structure by investigating the transient and spatial evolution of primary polydispersity, degree of sintering and TEM-style images. Highlights: •An algorithm is presented to solve reactor networks with a population balance model. •A stochastic method is used to solve the population balance equations. •The convergence and efficiency of the reported algorithms are evaluated. •The algorithm is applied to simulate silicon nanoparticle synthesis in a 1D reactor. •Particle structure is reported as a function of reactor length and time
Design criteria for advanced reactors

International Nuclear Information System (INIS)

Dennielou, Y.

1991-01-01

Design criteria for advanced reactors are discussed, including safety aspects, site selection, problems related to maintenance and possibility of repairing or replacing structures or components of a nuclear power plant, the human factor considerations. Bearing in mind that some of these criteria are the subject of consensus at international level, the author suggests to establish a table of different operator requirements, to prepare a dossier on the comparison of input data for probabilistic risk analysis, to take into consideration the means to control a severe accident from the very start of the design
Calculation of the fissile mass of a graphite moderated critical assembly using 93% enriched uranium

International Nuclear Information System (INIS)

Correa, F.; Marzo, M.A.S.; Collussi, I.; Ferreira, A.C.A.

1976-01-01

The critical mass of uranium has been calculated for a graphite moderated set fueled with 93% enriched uranium to be mounted on the Instituto de Energia Atomica split table Zero Power Reactor. The core composition was optimized to permit the maximum number of configurations to be studied. Analysis of three core compositions shows that 8 Kg of uranium enriched to 93% - U-235 (by weight) and 100 Kg of thorium would be sufficient for criticality experiments [pt
Improving complex kinship analyses with additional STR loci.

Science.gov (United States)

Carboni, Ilaria; Iozzi, Sara; Nutini, Anna Lucia; Torricelli, Francesca; Ricci, Ugo

2014-11-01

In a standard paternity testing, mother, child, and alleged father are analyzed with STR markers using commercially available kits. Since Italian civil legislation does not have thresholds to confirm a paternity, paternity is practically proven when likelihood ratio increases prior probability of paternity to posterior, accepted by court as sufficient. However, in some cases the number of markers included in a commercial kit may be insufficient to conclusively prove or disprove a relationship between individuals, especially when complex family scenarios are suspected or indirect analyses are required. Additional genetic information can increase the values of the likelihood ratio regarding the detection of true parental relationships in a pedigree, while reducing the chances of false attributions (e.g. false paternities). In these cases the introduction of a 26Plex amplification system allows to examine 23-26 additional markers depending on the commercial kit used, thus increasing the statistical power of the kinship analysis. The PCR conditions were optimized for a multiplex amplification system and a new generation CE instrument. In order to demonstrate the utility of additional STRs markers, four complex kinship cases are presented. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
Combining discrete equations method and upwind downwind-controlled splitting for non-reacting and reacting two-fluid computations

International Nuclear Information System (INIS)

Tang, K.

2012-01-01

When numerically investigating multiphase phenomena during severe accidents in a reactor system, characteristic lengths of the multi-fluid zone (non-reactive and reactive) are found to be much smaller than the volume of the reactor containment, which makes the direct modeling of the configuration hardly achievable. Alternatively, we propose to consider the physical multiphase mixture zone as an infinitely thin interface. Then, the reactive Riemann solver is inserted into the Reactive Discrete Equations Method (RDEM) to compute high speed combustion waves represented by discontinuous interfaces. An anti-diffusive approach is also coupled with RDEM to accurately simulate reactive interfaces. Increased robustness and efficiency when computing both multiphase interfaces and reacting flows are achieved thanks to an original upwind downwind-controlled splitting method (UDCS). UDCS is capable of accurately solving interfaces on multi-dimensional unstructured meshes, including reacting fronts for both deflagration and detonation configurations. (author)
Tune splitting in the presence of linear coupling

International Nuclear Information System (INIS)

Parzen, G.

1991-01-01

The presence of random skew quadrupole field errors will couple the x and y motions. The x and y motions are then each given by the sum of 2 normal modes with the tunes v 1 and v 2 , which may differ appreciably from v x and v y , the unperturbed tunes. This is often called tune splitting since |v 1 - v 2 | is usually larger than |v x - v y |. This tune splitting may be large in proton accelerators using superconducting magnets, because of the relatively large random skew quadrupole field errors that are expected in these magnets. This effect is also increased by the required insertions in proton colliders which generate large β-functions in the insertion region. This tune splitting has been studied in the RHIC accelerator. For RHIC, a tune splitting as large as 0.2 was found in one worse case. A correction system has been developed for correcting this large tune splitting which uses two families of skew quadrupole correctors. It has been found that this correction system corrects most of the large tune splitting, but a residual tune splitting remains that is still appreciable. This paper discusses the corrections to this residual time
Split-plot designs for robotic serial dilution assays.

Science.gov (United States)

Buzas, Jeffrey S; Wager, Carrie G; Lansky, David M

2011-12-01

This article explores effective implementation of split-plot designs in serial dilution bioassay using robots. We show that the shortest path for a robot to fill plate wells for a split-plot design is equivalent to the shortest common supersequence problem in combinatorics. We develop an algorithm for finding the shortest common supersequence, provide an R implementation, and explore the distribution of the number of steps required to implement split-plot designs for bioassay through simulation. We also show how to construct collections of split plots that can be filled in a minimal number of steps, thereby demonstrating that split-plot designs can be implemented with nearly the same effort as strip-plot designs. Finally, we provide guidelines for modeling data that result from these designs. © 2011, The International Biometric Society.
7 CFR 51.2731 - U.S. Spanish Splits.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false U.S. Spanish Splits. 51.2731 Section 51.2731... STANDARDS) United States Standards for Grades of Shelled Spanish Type Peanuts Grades § 51.2731 U.S. Spanish Splits. “U.S. Spanish Splits” consists of shelled Spanish type peanut kernels which are split or broken...
Split scheduling with uniform setup times.

NARCIS (Netherlands)

F. Schalekamp; R.A. Sitters (René); S.L. van der Ster; L. Stougie (Leen); V. Verdugo; A. van Zuylen

2015-01-01

htmlabstractWe study a scheduling problem in which jobs may be split into parts, where the parts of a split job may be processed simultaneously on more than one machine. Each part of a job requires a setup time, however, on the machine where the job part is processed. During setup, a
Numerical simulation and experiment on multilayer stagger-split die.

Science.gov (United States)

Liu, Zhiwei; Li, Mingzhe; Han, Qigang; Yang, Yunfei; Wang, Bolong; Sui, Zhou

2013-05-01

A novel ultra-high pressure device, multilayer stagger-split die, has been constructed based on the principle of "dividing dies before cracking." Multilayer stagger-split die includes an encircling ring and multilayer assemblages, and the mating surfaces of the multilayer assemblages are mutually staggered between adjacent layers. In this paper, we investigated the stressing features of this structure through finite element techniques, and the results were compared with those of the belt type die and single split die. The contrast experiments were also carried out to test the bearing pressure performance of multilayer stagger-split die. It is concluded that the stress distributions are reasonable and the materials are utilized effectively for multilayer stagger-split die. And experiments indicate that the multilayer stagger-split die can bear the greatest pressure.
Tensor products of higher almost split sequences

OpenAIRE

Pasquali, Andrea

2015-01-01

We investigate how the higher almost split sequences over a tensor product of algebras are related to those over each factor. Herschend and Iyama gave a precise criterion for when the tensor product of an $n$-representation finite algebra and an $m$-representation finite algebra is $(n+m)$-representation finite. In this case we give a complete description of the higher almost split sequences over the tensor product by expressing every higher almost split sequence as the mapping cone of a suit...

An approach of raising the low power reactor trip block (P-7) in Maanshan Power Plant

International Nuclear Information System (INIS)

Wang, L.C.

1984-01-01

The technical specification for the Maanshan Nuclear Power Station (FSAR Table 16.2.2-3) requires that with an increasing reactor power level above the setpoint of low power reactor trip block (P-7), a turbine trip shall initiate a reactor trip. This anticipatory reactor trip on turbine trip prevents the pressurizer PORV from openning during turbine trip event. In order to reduce unnecessary reactor trip due to turbine trip on low reactor power level during Maanshan start-up stage, Taiwan Power Company performed a transient analysis for turbine trip event by using RETRAN code. The highest reactor power level at which a turbine trip will not open the pressurizer PORV is searched. The results demonstrated that this power level can be increased from the original value-10% of the rated thermal power-to about 48% of the rated thermal power
Examination policy concerning the additional installation of No. 3 and No. 4 reactors in Takahama Nuclear Power Station and No. 3 and No. 4 reactors in Fukushima No. 2 Nuclear Power Station

International Nuclear Information System (INIS)

1980-01-01

The Nuclear Safety Commission decided the annual examination policy on the modification of reactor installation in Takahama Nuclear Power Station to construct No. 3 and No. 4 reactors inquired under date of November 26, 1979, by the Minister of International Trade and Industry, so that the examination results of the accident in Three Mile Island nuclear power station are reflected to the examination for the purpose of improving reactor safety. The examination results of the accident in Three Mile Island power station are being investigated by the Committee on Examination of Reactor Safety, based on the policy shown in ''On the second report of the special committee examining the accident in a nuclear power station in the U.S.'' determined by the Nuclear Safety Commission under date of September 13, 1979. Though the Committee will further clarify the past guideline about the items concerning the criteria, design and operation management, the Committee decided the tentative policy to reflect it to safety examination. Further, a table is attached, in which 52 items to be reflected to the security measures are classified from the viewpoint of necessity to reflect them to the final examination. This table includes 13 items of criteria and examination, 7 items related to design, 10 items related to operation management, 10 antidisaster items, and 12 items related to safety research. (Wakatsuki, Y.)
Conditional Toxin Splicing Using a Split Intein System.

Science.gov (United States)

Alford, Spencer C; O'Sullivan, Connor; Howard, Perry L

2017-01-01

Protein toxin splicing mediated by split inteins can be used as a strategy for conditional cell ablation. The approach requires artificial fragmentation of a potent protein toxin and tethering each toxin fragment to a split intein fragment. The toxin-intein fragments are, in turn, fused to dimerization domains, such that addition of a dimerizing agent reconstitutes the split intein. These chimeric toxin-intein fusions remain nontoxic until the dimerizer is added, resulting in activation of intein splicing and ligation of toxin fragments to form an active toxin. Considerations for the engineering and implementation of conditional toxin splicing (CTS) systems include: choice of toxin split site, split site (extein) chemistry, and temperature sensitivity. The following method outlines design criteria and implementation notes for CTS using a previously engineered system for splicing a toxin called sarcin, as well as for developing alternative CTS systems.
Split Scheduling with Uniform Setup Times

NARCIS (Netherlands)

Schalekamp, F.; Sitters, R.A.; van der Ster, S.L.; Stougie, L.; Verdugo, V.; van Zuylen, A.

2015-01-01

We study a scheduling problem in which jobs may be split into parts, where the parts of a split job may be processed simultaneously on more than one machine. Each part of a job requires a setup time, however, on the machine where the job part is processed. During setup, a machine cannot process or
Decision table languages and systems

CERN Document Server

Metzner, John R

1977-01-01

ACM Monograph Series: Decision Table Languages and Systems focuses on linguistic examination of decision tables and survey of the features of existing decision table languages and systems. The book first offers information on semiotics, programming language features, and generalization. Discussions focus on semantic broadening, outer language enrichments, generalization of syntax, limitations, implementation improvements, syntactic and semantic features, decision table syntax, semantics of decision table languages, and decision table programming languages. The text then elaborates on design im
Development of a phenomena identification and ranking table using fuzzy set theory

International Nuclear Information System (INIS)

Kljenak, I.; Jordan Cizelj, R.; Prosek, A.

2001-01-01

The use of fuzzy set theory in the development of Phenomena Identification and Ranking Table for a nuclear power plant transient is presented. Fuzzy set theory was used to aggregate the opinions from different experts concerning the importance of individual basic phenomena with respect to safety criteria. The use of fuzzy set theory is particularly adequate, as experts' opinions are inherently imprecise and uncertain. The method is presented on the specific case of a small-break loss-of-coolant accident in a two-loop pressurized water reactor. (author)
NNLO time-like splitting functions in QCD

International Nuclear Information System (INIS)

Moch, S.; Vogt, A.

2008-07-01

We review the status of the calculation of the time-like splitting functions for the evolution of fragmentation functions to the next-to-next-to-leading order in perturbative QCD. By employing relations between space-like and time-like deep-inelastic processes, all quark-quark and the gluon-gluon time-like splitting functions have been obtained to three loops. The corresponding quantities for the quark-gluon and gluon-quark splitting at this order are presently still unknown except for their second Mellin moments. (orig.)
Reactor calculation benchmark PCA blind test results

International Nuclear Information System (INIS)

Kam, F.B.K.; Stallmann, F.W.

1980-01-01

Further improvement in calculational procedures or a combination of calculations and measurements is necessary to attain 10 to 15% (1 sigma) accuracy for neutron exposure parameters (flux greater than 0.1 MeV, flux greater than 1.0 MeV, and dpa). The calculational modeling of power reactors should be benchmarked in an actual LWR plant to provide final uncertainty estimates for end-of-life predictions and limitations for plant operations. 26 references, 14 figures, 6 tables
Reactor calculation benchmark PCA blind test results

Energy Technology Data Exchange (ETDEWEB)

Kam, F.B.K.; Stallmann, F.W.

1980-01-01

Further improvement in calculational procedures or a combination of calculations and measurements is necessary to attain 10 to 15% (1 sigma) accuracy for neutron exposure parameters (flux greater than 0.1 MeV, flux greater than 1.0 MeV, and dpa). The calculational modeling of power reactors should be benchmarked in an actual LWR plant to provide final uncertainty estimates for end-of-life predictions and limitations for plant operations. 26 references, 14 figures, 6 tables.
MCNPX Model/Table Comparison

International Nuclear Information System (INIS)

Hendricks, J.S.

2003-01-01

MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data tables are used for oxygen and models are used for uranium. The mix-and-match capability became available with MCNPX2.5.b (November 2002). For the first time, we present here comparisons that calculate radiation transport in materials with various combinations of data charts and model physics. The physics models are poor at low energies (<150 MeV); thus, data tables should be used when available. Our comparisons demonstrate the importance of the mix-and-match capability and indicate how well physics models work in the absence of data tables
Dílna kultury zvoncovitých pohárů na zpracování rohovce typu Stránská skála (Brno, katastrální území Slatina)

Czech Academy of Sciences Publication Activity Database

Šebela, Lubomír; Škrdla, Petr; Přichystal, A.; Kopacz, J.

2016-01-01

Roč. 1, č. 1 (2016), s. 119-128 ISSN 2453-8612 Institutional support: RVO:68081758 Keywords : Moravia (East part of Czech Republic) * Stránská skála (Brno, cadastral territory of Slatina) * Bell Beaker culture * workshop * chert of the Stránská skála type Subject RIV: AC - Archeology, Anthropology, Ethnology https://fphil.uniba.sk/fileadmin/fif/katedry_pracoviska/karch/MusArch/1_1/119-128.pdf
MCNPX Model/Table Comparison

CERN Document Server

Hendricks, J S

2003-01-01

MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO sub 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data t...
CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.40181, Lat: 28.19361 (WGS84); Sensor Depth: 1.00m; Data Range: 20030729-20041001.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); AMSM, OFU; Long: -169.62662, Lat: -14.18175 (WGS84); Sensor Depth: 9.80m; Data Range: 20040207-20060226.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, WAK; Long: 166.60452, Lat: 19.30868 (WGS84); Sensor Depth: 1.52m; Data Range: 20070505-20090325.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); CNMI, FDP; Long: 144.90023, Lat: 20.53725 (WGS84); Sensor Depth: 31.70m; Data Range: 20070603-20090428.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.81595, Lat: 27.85396 (WGS84); Sensor Depth: 7.62m; Data Range: 20060914-20080922.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); MHI, MAI; Long: -156.42031, Lat: 20.59198 (WGS84); Sensor Depth: 14.90m; Data Range: 20060805-20071009.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, NEC; Long: -164.69775, Lat: 23.57152 (WGS84); Sensor Depth: 17.07m; Data Range: 20050414-20060904.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); MHI, LAN; Long: -156.83705, Lat: 20.87186 (WGS84); Sensor Depth: 13.11m; Data Range: 20081019-20101021.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...

CRED Subsurface Temperature Recorder (STR); PRIA, JAR; Long: -159.99113, Lat: -00.36327 (WGS84); Sensor Depth: 9.75m; Data Range: 20060321-20080327.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); CNMI, SAI; Long: 145.78947, Lat: 15.17485 (WGS84); Sensor Depth: 19.20m; Data Range: 20080815-20090419.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26134, Lat: 23.76895 (WGS84); Sensor Depth: 4.57m; Data Range: 20080915-20100908.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27510, Lat: 23.85623 (WGS84); Sensor Depth: 7.62m; Data Range: 20080915-20091009.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17967, Lat: 23.63883 (WGS84); Sensor Depth: 11.28m; Data Range: 20060906-20070930.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.16683, Lat: 23.73815 (WGS84); Sensor Depth: 2.01m; Data Range: 20040918-20060905.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26132, Lat: 23.76897 (WGS84); Sensor Depth: 3.96m; Data Range: 20040917-20060905.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26197, Lat: 23.76887 (WGS84); Sensor Depth: 10.06m; Data Range: 20080915-20090614.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27163, Lat: 23.85675 (WGS84); Sensor Depth: 7.92m; Data Range: 20061112-20070924.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.16685, Lat: 23.73815 (WGS84); Sensor Depth: 2.13m; Data Range: 20060906-20081008.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27506, Lat: 23.85620 (WGS84); Sensor Depth: 0.30m; Data Range: 20091009-20100907.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.16747, Lat: 23.73812 (WGS84); Sensor Depth: 3.05m; Data Range: 20081008-20100908.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27185, Lat: 23.85682 (WGS84); Sensor Depth: 7.90m; Data Range: 20040918-20051009.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26135, Lat: 23.76892 (WGS84); Sensor Depth: 4.57m; Data Range: 20070930-20080915.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.21990, Lat: 23.86595 (WGS84); Sensor Depth: 2.10m; Data Range: 20040919-20060905.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.21970, Lat: 23.86607 (WGS84); Sensor Depth: 3.05m; Data Range: 20080916-20100907.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17971, Lat: 23.63880 (WGS84); Sensor Depth: 10.36m; Data Range: 20080915-20100910.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.21967, Lat: 23.86611 (WGS84); Sensor Depth: 2.00m; Data Range: 20030716-20040918.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27513, Lat: 23.85626 (WGS84); Sensor Depth: 7.92m; Data Range: 20091009-20100907.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26140, Lat: 23.76891 (WGS84); Sensor Depth: 4.00m; Data Range: 20021005-20030715.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...

CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.16685, Lat: 23.73815 (WGS84); Sensor Depth: 2.00m; Data Range: 20030717-20040916.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.21967, Lat: 23.86611 (WGS84); Sensor Depth: 2.00m; Data Range: 20020912-20030714.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27154, Lat: 23.85652 (WGS84); Sensor Depth: 6.10m; Data Range: 20070925-20071110.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.18554, Lat: 23.63507 (WGS84); Sensor Depth: 23.80m; Data Range: 20100514-20100909.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17377, Lat: 23.64516 (WGS84); Sensor Depth: 2.13m; Data Range: 20070930-20080915.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26140, Lat: 23.76891 (WGS84); Sensor Depth: 4.00m; Data Range: 20030716-20040916.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17350, Lat: 23.64478 (WGS84); Sensor Depth: 2.00m; Data Range: 20030717-20040919.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.18559, Lat: 23.63498 (WGS84); Sensor Depth: 23.16m; Data Range: 20061001-20071001.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27187, Lat: 23.85676 (WGS84); Sensor Depth: 7.92m; Data Range: 20070925-20091009.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.21967, Lat: 23.86607 (WGS84); Sensor Depth: 3.05m; Data Range: 20060906-20080916.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17377, Lat: 23.64515 (WGS84); Sensor Depth: 1.83m; Data Range: 20080915-20100910.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.27505, Lat: 23.85625 (WGS84); Sensor Depth: 7.62m; Data Range: 20070924-20080915.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17967, Lat: 23.63883 (WGS84); Sensor Depth: 10.67m; Data Range: 20070930-20080915.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.18554, Lat: 23.63507 (WGS84); Sensor Depth: 23.77m; Data Range: 20080915-20090614.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.18562, Lat: 23.63503 (WGS84); Sensor Depth: 23.77m; Data Range: 20091018-20100513.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.17373, Lat: 23.64516 (WGS84); Sensor Depth: 2.13m; Data Range: 20060906-20070930.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, FFS; Long: -166.26198, Lat: 23.76883 (WGS84); Sensor Depth: 11.28m; Data Range: 20091009-20100513.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.04504, Lat: 05.87031 (WGS84); Sensor Depth: 1.52m; Data Range: 20080402-20100412.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, LAY; Long: -171.72929, Lat: 25.75915 (WGS84); Sensor Depth: 0.91m; Data Range: 20060910-20080920.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); MHI, MOL; Long: -157.25236, Lat: 21.20307 (WGS84); Sensor Depth: 10.36m; Data Range: 20081024-20101023.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...

CRED Subsurface Temperature Recorder (STR); PRIA, JAR; Long: -159.99661, Lat: -00.38210 (WGS84); Sensor Depth: 32.61m; Data Range: 20080327-20100403.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.32334, Lat: 28.24437 (WGS84); Sensor Depth: 0.50m; Data Range: 20021204-20030727.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JAR; Long: -160.01552, Lat: -00.37926 (WGS84); Sensor Depth: 15.24m; Data Range: 20080327-20100401.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.40177, Lat: 28.19357 (WGS84); Sensor Depth: 1.22m; Data Range: 20060915-20080926.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JAR; Long: -160.00832, Lat: -00.36893 (WGS84); Sensor Depth: 32.30m; Data Range: 20060321-20080328.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.88215, Lat: 27.78250 (WGS84); Sensor Depth: 12.50m; Data Range: 20060913-20060922.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, GAR; Long: -167.99958, Lat: 24.99883 (WGS84); Sensor Depth: 10.36m; Data Range: 20040920-20060705.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JAR; Long: -160.00804, Lat: -00.36902 (WGS84); Sensor Depth: 6.40m; Data Range: 20080328-20080507.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JOH; Long: -169.55499, Lat: 16.71490 (WGS84); Sensor Depth: 2.70m; Data Range: 20040117-20060119.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, GAR; Long: -167.99952, Lat: 24.99883 (WGS84); Sensor Depth: 10.40m; Data Range: 20030719-20040919.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); CNMI, ZEA; Long: 145.85335, Lat: 16.89749 (WGS84); Sensor Depth: 24.68m; Data Range: 20070526-20090505.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); AMSM, ROS; Long: -168.15342, Lat: -14.53775 (WGS84); Sensor Depth: 2.40m; Data Range: 20080311-20100303.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); AMSM, TAU; Long: -169.41908, Lat: -14.23545 (WGS84); Sensor Depth: 9.75m; Data Range: 20080303-20100313.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JAR; Long: -159.97228, Lat: -00.37500 (WGS84); Sensor Depth: 30.70m; Data Range: 20060320-20080328.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); AMSM, TUT; Long: -170.70257, Lat: -14.33050 (WGS84); Sensor Depth: 1.20m; Data Range: 20040223-20060224.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MAR; Long: -170.51372, Lat: 25.36697 (WGS84); Sensor Depth: 4.27m; Data Range: 20040921-20060909.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); MHI, OAH; Long: -158.23436, Lat: 21.53197 (WGS84); Sensor Depth: 19.20m; Data Range: 20090902-20100715.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); CNMI, AGU; Long: 145.53723, Lat: 14.84778 (WGS84); Sensor Depth: 8.23m; Data Range: 20070518-20090410.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.36784, Lat: 28.27774 (WGS84); Sensor Depth: 0.30m; Data Range: 20020926-20030727.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); AMSM, SWA; Long: -171.09092, Lat: -11.05855 (WGS84); Sensor Depth: 14.00m; Data Range: 20040216-20060211.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...

CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.12694, Lat: 05.86387 (WGS84); Sensor Depth: 15.20m; Data Range: 20040402-20060328.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MAR; Long: -170.53972, Lat: 25.38417 (WGS84); Sensor Depth: 1.50m; Data Range: 20030720-20040920.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, LIS; Long: -173.88422, Lat: 25.94284 (WGS84); Sensor Depth: 20.42m; Data Range: 20060927-20081004.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, KUR; Long: -178.34317, Lat: 28.41816 (WGS84); Sensor Depth: 9.75m; Data Range: 20090916-20100918.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JOH; Long: -169.48513, Lat: 16.74071 (WGS84); Sensor Depth: 2.13m; Data Range: 20080201-20100125.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.78083, Lat: 27.95750 (WGS84); Sensor Depth: 1.00m; Data Range: 20020927-20030728.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.34437, Lat: 28.21823 (WGS84); Sensor Depth: 9.14m; Data Range: 20050701-20060915.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, KUR; Long: -178.32575, Lat: 28.38175 (WGS84); Sensor Depth: 12.50m; Data Range: 20090915-20100519.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.78085, Lat: 27.95766 (WGS84); Sensor Depth: 1.22m; Data Range: 20060915-20061030.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JOH; Long: -169.52683, Lat: 16.74804 (WGS84); Sensor Depth: 2.00m; Data Range: 20040114-20060119.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, BAK; Long: -176.48875, Lat: 00.19178 (WGS84); Sensor Depth: 17.37m; Data Range: 20080209-20100207.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.04044, Lat: 05.87450 (WGS84); Sensor Depth: 5.18m; Data Range: 20080402-20100409.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, KIN; Long: -162.38180, Lat: 06.42888 (WGS84); Sensor Depth: 5.18m; Data Range: 20080407-20100415.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, LIS; Long: -173.96097, Lat: 26.06337 (WGS84); Sensor Depth: 0.61m; Data Range: 20060925-20081005.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JOH; Long: -169.55502, Lat: 16.71490 (WGS84); Sensor Depth: 2.74m; Data Range: 20080201-20100127.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, LIS; Long: -173.91583, Lat: 25.96762 (WGS84); Sensor Depth: 10.36m; Data Range: 20081004-20090910.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.86494, Lat: 27.94438 (WGS84); Sensor Depth: 35.36m; Data Range: 20070805-20080923.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.11275, Lat: 05.86657 (WGS84); Sensor Depth: 12.19m; Data Range: 20090918-20100408.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, JOH; Long: -169.49964, Lat: 16.75956 (WGS84); Sensor Depth: 8.84m; Data Range: 20080201-20100125.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MAR; Long: -170.51376, Lat: 25.36694 (WGS84); Sensor Depth: 4.27m; Data Range: 20060909-20080919.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...

CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.40178, Lat: 28.19358 (WGS84); Sensor Depth: 0.91m; Data Range: 20041002-20050520.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.88112, Lat: 27.78202 (WGS84); Sensor Depth: 23.16m; Data Range: 20060913-20060922.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, KUR; Long: -178.28268, Lat: 28.39066 (WGS84); Sensor Depth: 19.20m; Data Range: 20060918-20080111.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.81593, Lat: 27.85397 (WGS84); Sensor Depth: 7.90m; Data Range: 20040928-20060912.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.12130, Lat: 05.88243 (WGS84); Sensor Depth: 3.96m; Data Range: 20080403-20100411.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, LIS; Long: -173.96100, Lat: 26.06368 (WGS84); Sensor Depth: 0.50m; Data Range: 20030726-20041008.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.04503, Lat: 05.87029 (WGS84); Sensor Depth: 1.21m; Data Range: 20060326-20070618.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, HOW; Long: -176.62133, Lat: 00.80660 (WGS84); Sensor Depth: 3.00m; Data Range: 20060128-20080207.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, LAY; Long: -171.72941, Lat: 25.75893 (WGS84); Sensor Depth: 1.00m; Data Range: 20030723-20040923.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, KUR; Long: -178.34457, Lat: 28.41858 (WGS84); Sensor Depth: 9.75m; Data Range: 20041024-20060917.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, KIN; Long: -162.34219, Lat: 06.39240 (WGS84); Sensor Depth: 7.60m; Data Range: 20040403-20060329.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.16859, Lat: 05.88377 (WGS84); Sensor Depth: 19.51m; Data Range: 20080331-20100411.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, KUR; Long: -178.35620, Lat: 28.45155 (WGS84); Sensor Depth: 20.12m; Data Range: 20081001-20100918.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MAR; Long: -170.66913, Lat: 25.41957 (WGS84); Sensor Depth: 11.58m; Data Range: 20080918-20090615.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, PAL; Long: -162.00206, Lat: 05.87637 (WGS84); Sensor Depth: 32.61m; Data Range: 20080402-20100412.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.88089, Lat: 27.78168 (WGS84); Sensor Depth: 37.49m; Data Range: 20060913-20060922.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, MID; Long: -177.37492, Lat: 28.19637 (WGS84); Sensor Depth: 14.02m; Data Range: 20060916-20080925.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); PRIA, HOW; Long: -176.62216, Lat: 00.82351 (WGS84); Sensor Depth: 18.90m; Data Range: 20040122-20060226.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.77935, Lat: 27.80267 (WGS84); Sensor Depth: 1.52m; Data Range: 20080924-20100914.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...
CRED Subsurface Temperature Recorder (STR); NWHI, PHR; Long: -175.81592, Lat: 27.85395 (WGS84); Sensor Depth: 0.30m; Data Range: 20090923-20090925.

Data.gov (United States)

National Oceanic and Atmospheric Administration, Department of Commerce — Data from Coral Reef Ecosystem Division (CRED), NOAA Pacific Islands Fisheries Science Center (PIFSC) Subsurface Temperature Recorders (STR) provide a time series of...

Some links on this page may take you to non-federal websites. Their policies may differ from this site.