State environmental review of a proposed utility independent spent fuel storage installation

International Nuclear Information System (INIS)

Sabel, G.; Halstead, R.

1991-01-01

This paper describes the environmental review process which was applied by the State of Minnesota to a proposed dry cask storage facility. An environmental analysis of the proposed project is summarized, as are alternatives including other dry storage technologies, increased in-pool storage, transhipment, reprocessing, use of higher burnup fuel and conservation. Public comments and concerns included potential cask failures, health impacts, and the possibility of the site becoming a open-quotes permanentclose quotes storage facility. State intervention in the federal license process is also described

State of development of CERN proton storage rings

CERN Document Server

Huber, H

1973-01-01

The storage rings are briefly described and the 'luminosity', meaning a standardised counting method, is stated for the energies available at the centre of gravity. The maximum of luminosity reached so far is compared with the maximum possible luminosity and the reasons for the discrepancy are discussed. An example shows graphs of luminosity and of the beams after completion of the storage process, as functions of time. (2 refs).

Economic analysis of a centralized LLRW storage facility in New York State

International Nuclear Information System (INIS)

Spath, J.P.; Voelk, H.; Brodie, H.

1994-01-01

In response to the possibility of no longer having access to out-of-State disposal facilities, the New York State Energy Research and Development Authority (Energy Authority) was directed by the New York State Legislature (1990-91 State Operation Budget Appropriations) to conduct a low-level radioactive waste (LLRW) storage study. One of the objectives of this study was to investigate the economic viability of establishing a separate Centralized Storage Facility for Class A LLRW from medical and academic institutions. This resulted in the conceptual design of a nominal Centralized Storage Facility capable of storing 100,000 cubic feet of dry-solid and liquid wastes and freezer storage capacity of 20,000 cubic feet for biological wastes. The facility itself includes office and laboratory space as well as receipt, inspection, and health physics monitoring stations. The Conceptual Design was initially developed to define the scope and detail of the cost parameters to be evaluated. It established a basis for conducting comparisons of the cost of four alternative project approaches and the sensitivity of unit storage costs to siting-related costs. In estimating costs of a Centralized Storage Facility, four cases were used varying assumptions with respect to parameters such as volume projections and freezer capacity; siting costs; and site acquisition costs

Using Emergent and Internal Catchment Data to Elucidate the Influence of Landscape Structure and Storage State on Hydrologic Response in a Piedmont Watershed

Science.gov (United States)

Putnam, S. M.; Harman, C. J.

2017-12-01

Many studies have sought to unravel the influence of landscape structure and catchment state on the quantity and composition of water at the catchment outlet. These studies run into issues of equifinality where multiple conceptualizations of flow pathways or storage states cannot be discriminated against on the basis of the quantity and composition of water alone. Here we aim to parse out the influence of landscape structure, flow pathways, and storage on both the observed catchment hydrograph and chemograph, using hydrometric and water isotope data collected from multiple locations within Pond Branch, a 37-hectare Piedmont catchment of the eastern US. This data is used to infer the quantity and age distribution of water stored and released by individual hydrogeomorphic units, and the catchment as a whole, in order to test hypotheses relating landscape structure, flow pathways, and catchment storage to the hydrograph and chemograph. Initial hypotheses relating internal catchment properties or processes to the hydrograph or chemograph are formed at the catchment scale. Data from Pond Branch include spring and catchment discharge measurements, well water levels, and soil moisture, as well as three years of high frequency precipitation and surface water stable water isotope data. The catchment hydrograph is deconstructed using hydrograph separation and the quantity of water associated with each time-scale of response is compared to the quantity of discharge that could be produced from hillslope and riparian hydrogeomorphic units. Storage is estimated for each hydrogeomorphic unit as well as the vadose zone, in order to construct a continuous time series of total storage, broken down by landscape unit. Rank StorAge Selection (rSAS) functions are parameterized for each hydrogeomorphic unit as well as the catchment as a whole, and the relative importance of changing proportions of discharge from each unit as well as storage in controlling the variability in the catchment

State-level emergency preparedness and response capabilities.

Science.gov (United States)

Watkins, Sharon M; Perrotta, Dennis M; Stanbury, Martha; Heumann, Michael; Anderson, Henry; Simms, Erin; Huang, Monica

2011-03-01

Prior assessments of public health readiness had identified gaps in radiation preparedness. In recent years, preparedness planning has involved an "all-hazards" approach. Current assessment of the national status related to radiation public health emergency preparedness capabilities at the state and local health department levels was needed. A survey of state health departments related to radiation readiness was undertaken in 2010 by the Council of State and Territorial Epidemiologists (CSTE). States with nuclear power plants were instructed to consider their responses exclusive of capabilities and resources related to the plants given that the emergency response plans for nuclear power plants are specific and unique. Thirty-eight (76%) state health departments responded to the survey, including 26 of the 31 states with nuclear power plants. Specific strengths noted at the state level included that the majority of states had a written radiation response plan and most plans include a detailed section for communications issues during a radiation emergency. In addition, more than half of the states indicated that their relationship with federal partners is sufficient to provide resources for radiation emergencies, indicating the importance states placed on federal resources and expertise. Specific weaknesses are discussed and include that most states had completed little to no planning for public health surveillance to assess potential human health impacts of a radiation event; less than half had written plans to address exposure assessment, environmental sampling, human specimen collection and analysis, and human health assessment. Few reported having sufficient resources to do public health surveillance, radiation exposure assessment, laboratory functions and other capabilities. Levels of planning, resources and partnerships varied among states, those with nuclear power plants were better prepared. Gaps were evident in all states; however and additional training and

Bulk energy storage increases United States electricity system emissions.

Science.gov (United States)

Hittinger, Eric S; Azevedo, Inês M L

2015-03-03

Bulk energy storage is generally considered an important contributor for the transition toward a more flexible and sustainable electricity system. Although economically valuable, storage is not fundamentally a "green" technology, leading to reductions in emissions. We model the economic and emissions effects of bulk energy storage providing an energy arbitrage service. We calculate the profits under two scenarios (perfect and imperfect information about future electricity prices), and estimate the effect of bulk storage on net emissions of CO2, SO2, and NOx for 20 eGRID subregions in the United States. We find that net system CO2 emissions resulting from storage operation are nontrivial when compared to the emissions from electricity generation, ranging from 104 to 407 kg/MWh of delivered energy depending on location, storage operation mode, and assumptions regarding carbon intensity. Net NOx emissions range from -0.16 (i.e., producing net savings) to 0.49 kg/MWh, and are generally small when compared to average generation-related emissions. Net SO2 emissions from storage operation range from -0.01 to 1.7 kg/MWh, depending on location and storage operation mode.

Every storage function is a state function

NARCIS (Netherlands)

Trentelman, H.L.; Willems, J.C.

1997-01-01

It is shown that for linear dynamical systems with quadratic supply rates, a storage function can always be written as a quadratic function of the state of an associated linear dynamical system. This dynamical system is obtained by combining the dynamics of the original system with the dynamics of

Generation and storage of quantum states using cold atoms

DEFF Research Database (Denmark)

Dantan, Aurelien Romain; Josse, Vincent; Cviklinski, Jean

2006-01-01

Cold cesium or rubidium atomic samples have a good potential both for generation and storage of nonclassical states of light. Generation of nonclassical states of light is possible through the high non-linearity of cold atomic samples excited close to a resonance line. Quadrature squeezing, polar...

Design Considerations of a Solid State Thermal Energy Storage

Science.gov (United States)

Janbozorgi, Mohammad; Houssainy, Sammy; Thacker, Ariana; Ip, Peggy; Ismail, Walid; Kavehpour, Pirouz

2016-11-01

With the growing governmental restrictions on carbon emission, renewable energies are becoming more prevalent. A reliable use of a renewable source however requires a built-in storage to overcome the inherent intermittent nature of the available energy. Thermal design of a solid state energy storage has been investigated for optimal performance. The impact of flow regime, laminar vs. turbulent, on the design and sizing of the system is also studied. The implications of low thermal conductivity of the storage material are discussed and a design that maximizes the round trip efficiency is presented. This study was supported by Award No. EPC-14-027 Granted by California Energy Commission (CEC).

Technical issues and approach to license dry storage of LWR fuel in the United States

International Nuclear Information System (INIS)

Johnson, A.B.; Beeman, G.H.; Creer, J.M.; Gilbert, E.R.

1984-01-01

Dry storage is emerging as an important alternative to wet storage for US utilities, even though wet storage will remain the principal storage method, at least until the federal government begins to accept fuel in 1998. Dry storage has been licensed in several countries. In the USA, dry storage issues are related to storage system performance and behavior of spent fuel during storage. There is a coordinated US effort among electric utilities, the Electric Power Research Institute (EPRI), the Department of Energy (DOE) and the Nuclear Regulatory Commission (NRC) to license two dry storage concepts: metal casks, and horizontal storage modules. The following activities are underway to resolve the licensing issues associated with dry storage and to establish the licensing basis: a) summarize and assimilate domestic and foreigh dry storage experience; b) conduct tests which resolve specific licensing issues; c) conduct cooperative demonstrations of the leading dry storage concepts; d) establish criteria and justifications for generic licensing. The paper summarizes the licensing issues and the approach to their resolution

HCUP State Emergency Department Databases (SEDD) - Restricted Access File

Data.gov (United States)

U.S. Department of Health & Human Services — The State Emergency Department Databases (SEDD) contain the universe of emergency department visits in participating States. Restricted access data files are...

Radionuclide diagnosis of emergency states

International Nuclear Information System (INIS)

Ishmukhametov, A.I.

1985-01-01

Solution of emergency state radionuclide diagnostics from the technical point of view is provided by the application of the mobile quick-operating equipment in combination with computers, by the use of radionuclides with acceptable for emergency medicine characteristics and by development of radionuclide investigation data propcessing express-method. Medical developments include the study of acute disease and injury radioisotope semiotics, different indication diagnostic value determining, comparison of the results, obtained during radionuclide investigation, with clinicolaboratory and instrumental data, separation of methodical complex series

Review of Solid State Hydrogen Storage Methods Adopting Different Kinds of Novel Materials

Directory of Open Access Journals (Sweden)

Renju Zacharia

2015-01-01

Full Text Available Overview of advances in the technology of solid state hydrogen storage methods applying different kinds of novel materials is provided. Metallic and intermetallic hydrides, complex chemical hydride, nanostructured carbon materials, metal-doped carbon nanotubes, metal-organic frameworks (MOFs, metal-doped metal organic frameworks, covalent organic frameworks (COFs, and clathrates solid state hydrogen storage techniques are discussed. The studies on their hydrogen storage properties are in progress towards positive direction. Nevertheless, it is believed that these novel materials will offer far-reaching solutions to the onboard hydrogen storage problems in near future. The review begins with the deficiencies of current energy economy and discusses the various aspects of implementation of hydrogen energy based economy.

State of emergency and emergency: Comparative terminological and semantic aspects

OpenAIRE

Avramović, Dragutin; Mlađan, Dragan

2014-01-01

The issue of theoretical definition and distinction between a state of emergency and an emergency is made current in recent national and international literature, as well as in different comparative law normative solutions. Considering the usage inconsistencies of the two terms, this paper attempts to highlight the differences between them, as they essentially carry distinctive legal meanings despite their implied lexical and logical similarity. The paper stresses the necessity of their clear...

Study on state equation for hydrogen storage measurement by volumetric method

International Nuclear Information System (INIS)

Dai Wei; Xu Jiajing; Wang Chaoyang; Tang Yongjian

2014-01-01

Volumetric measurement technique is one of the most popular methods for determining the amount of hydrogen storage. A new state equation was established which extended the limitations from the ideal gas state equation, the van der Waals equation and the Gou equation. The new state equation was then employed to describe the p-V-T character of hydrogen and investigate the adsorption quantity of hydrogen storage in resorcin-formaldehyde aerogel under different temperatures and pressures. The new equation was used to describe the density of hydrogen under different temperatures and pressures. The results are in good agreement with the experimental data. The differences arising from various underlying physics were carefully analyzed. (authors)

Thermodynamic and economic assessment of off-grid portable cooling systems with energy storage for emergency areas

International Nuclear Information System (INIS)

Ozcan, Hasan; Akyavuz, Umit Deniz

2017-01-01

Highlights: • Solar based refrigeration systems with energy storage are proposed. • Thermodynamic and economic assessments are applied. • Cost of the pumped-hydro storage quadruples the hydrogen storage option. • A case study is made for the city of Aleppo in Syria as an emergency region. - Abstract: This study aims to investigate performance and cost aspects of a solar powered portable cooling system to conserve first aid supplies for off-grid areas with energy storage. Due to the intermittent nature of solar energy availability, two energy storage options are considered for a stationary system. Additional to the standalone system without energy storage, hydrogen is selected to be the storage medium by considering electrolysis at day time, and use of a hydrogen fuel cell unit at night time. This system consists of solar photovoltaic cells, a Polymer Exchange Membrane (PEM) electrolysis unit (PEME), hydrogen tank, a PEM fuel cell unit (PEMFC), and a vapor compression refrigeration (VCR) system to condition a container rated with ∼11 kW cooling load. The second system utilizes pumped – hydro storage (PHS) technology using a simple pump – turbine couple by storing water at a higher reservoir during day time and utilizing it to produce hydro power at night. Existence of higher reservoir brings a significant additional cost for the PHS system, making this configuration almost four times more costly than that of the hydrogen storage option, even though the storage efficiency of the PHS system is significantly higher than the hydrogen storage.

EMERGENCY STATES IN ARTERIAL HYPERTENSION

Directory of Open Access Journals (Sweden)

M. A. Gurevich

2014-01-01

Full Text Available The article describes in detail potential emergency states in patients with different stages of arterial hypertension with special attention to diagnosis and rational management of hypertensive crisis. Differentiated approach to management of different forms of hypertensive crisis is specified.

Status and current spent fuel storage practices in the United States

International Nuclear Information System (INIS)

Lake, W.H.

1999-01-01

Brief discussions are presented on the history and state of spent fuel generation by utilities that comprise the United States commercial nuclear power industry, the current situation regarding the Federal government's nuclear waste policy, and evolving spent fuel storage practices. These evolving spent fuel storage practices are the result of private sector initiatives, but appear to be influenced by various external factors. The paper is not intended to provide a comprehensive appraisal of the storage initiatives being conducted by the private sector. The focus, instead, is on the Federal government's role and activities related to spent fuel management. Although the Federal government has adopted a policy calling for deep geological disposal of spent fuel, the US Congress has recently begun to consider expanding that policy to include a centralized interim storage facility. In the absence of such an expanded policy, the Department of Energy has performed some preliminary activities that would expedite development of a centralized interim storage facility, if Congress were to enact such a policy. The Department's current activities with regard to developing a centralized interim storage facility, which are consistent with the current policy, are described in the paper. The paper also describes two important technical development activities that have been conducted by the Department of Energy to support improved efficiency in spent fuel management. The Department's activities regarding development of a burnup credit methodology, and a dry transfer system are summarized. (author)

Opportunities and barriers to pumped-hydro energy storage in the United States

International Nuclear Information System (INIS)

Yang, Chi-Jen; Jackson, Robert B.

2011-01-01

As concerns about global warming grow, societies are increasingly turning to the use of intermittent renewable energy resources, where energy storage becomes more and more important. Pumped-hydro energy storage (PHES) is the most established technology for utility-scale electricity storage. Although PHES has continued to be deployed globally, its development in the United States has largely been dormant since the 1990s. In recent years, however, there has been a revival of commercial interests in developing PHES facilities. In this paper we examine the historical development of PHES facilities in the United States, analyze case studies on the controversies of disputed projects, examine the challenges to and conflicting views of future development in the United States, and discuss new development activities and approaches. The main limiting factors for PHES appear to be environmental concerns and financial uncertainties rather than the availability of technically feasible sites. PHES developers are proposing innovative ways of addressing the environmental impacts, including the potential use of waste water in PHES applications. In some cases, a properly designed PHES system can even be used to improve water quality through aeration and other processes. Such new opportunities and the increasing need for greater energy storage may lead policymakers to reassess the potential of PHES in the United States, particularly for coupling with intermittent renewable energy sources such as wind and solar power. (author)

Issue Brief: A Survey of State Policies to Support Utility-Scale and Distributed-Energy Storage (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2014-09-01

This document summarizes proposed and enacted legislation and activities related to energy storage for nine states, which are presented alphabetically. These states were selected to provide a high-level view of various energy storage efforts taking place across the United States.

Underground Gas Storage in the World 2013 (fifth edition)

International Nuclear Information System (INIS)

Cornot-Gandolphe, Sylvie

2013-06-01

Since its first publication in 1990, 'Underground Gas Storage in the World' has been the industry's reference on underground gas storage (UGS). The updated 2013 edition includes in-depth CEDIGAZ's analyses of the latest developments and trends in the storage industry all over the world as well as extensive country analyses with complete datasets including current, under construction and planned Underground Gas Storage facilities in 48 countries. It describes the 688 existing storage facilities in the world and the 236 projects under construction and planned. Future storage demand and its main drivers are presented at global and regional levels. The study builds on the CEDIGAZ Underground Gas Storage Database, the only worldwide Underground Gas Storage database to be updated every year. This document summarizes the key findings of the Survey which includes four main parts: The first part gives an overview of underground gas storage in the world at the beginning of 2013 and analyzes future storage needs by 2030, at regional and international levels. The second part focuses on new trends and issues emerging or developing in key storage markets. It analyzes the emerging storage market in China, reviews the storage business climate in Europe, examines Gazprom's storage strategy in Europe, and reviews recent trends in storage development in the United States. The third part gives some fundamental background on technical, economic and regulatory aspects of gas storage. The fourth part gives a countrywide analysis of the 48 countries in the world holding underground gas storage facilities or planning storage projects. 48 countries are surveyed with 688 existing UGS facilities, 256 projects under construction or planned

Southern states radiological emergency response laws and regulations

International Nuclear Information System (INIS)

1989-07-01

The purpose of this report is to provide a summary of the emergency response laws and regulations in place in the various states within the southern region for use by legislators, emergency response planners, the general public and all persons concerned about the existing legal framework for emergency response. SSEB expects to periodically update the report as necessary. Radiation protection regulations without emergency response provisions are not included in the summary

New York State's low-level radioactive waste storage study

International Nuclear Information System (INIS)

Spath, John P.

1992-01-01

Like their counterparts in other states, low-level radioactive waste (LLRW) generators in New York State face the prospect of being unable to transfer their LLRW off site beginning January 1, 1993. How long will those generators be able to accumulate and store LLRW on site before activities producing the waste are seriously interrupted? Would a centralized storage facility be a more economically viable solution for medical and academic institutions? The New York State Energy Research and Development Authority is conducting a study that seeks to answer these and a variety of related questions over the coming year. This paper describes the origin and design of the study. It reviews the plans for generator-specific data collection, the method for assessing generator storage capability, and the approach to evaluating economic viability. In pursuing this study, the Energy Authority has attempted to incorporate the views of the broad spectrum of LLRW interests. The formation and role of the Study Review Panel, established specifically for that purpose, is discussed. Finally, the paper reviews some of the more interesting questions and issues raised in the development of the study and relates the study to the State's other LLRW management activities, particularly its Interim LLRW Management Plan. (author)

United States Department of Energy radiological emergency response programme - a national capability

International Nuclear Information System (INIS)

Gordon-Hagerty, L.E.

1993-01-01

In order to respond to a radiological emergency, the United States Department of Energy (USDOE) maintains seven emergency response assets and capabilities in support of a radiological emergency of any proportion within the continental United States and abroad. The seven emergency response assets and capabilities include: Accident Response Group; Aerial Measuring Systems; Atmospheric Release Advisory Capability; Federal Radiological Monitoring and Assessment Center; Nuclear Emergency Search Team; Radiation Emergency Assistance Center/Training Site; and Radiological Assistance Program. Presently, USDOE maintains the most comprehensive national radiological emergency response assets in the United States, capable of dealing with any type of emergency involving nuclear materials. In all, the Department's assets are available to support any type of accident/incident involving radioactive materials in coordination with other United States Federal agencies, as well as state and local governments, as required. (author)

State Emergency Department Opioid Guidelines: Current Status.

Science.gov (United States)

Broida, Robert I; Gronowski, Tanner; Kalnow, Andrew F; Little, Andrew G; Lloyd, Christopher M

2017-04-01

The purpose of this study was to evaluate and categorize current state-sponsored opioid guidelines for the practice of emergency medicine (EM). We conducted a comprehensive search of EM-specific opioid prescribing guidelines and/or policies in each state to determine current state involvement in EM opioid prescribing, as well as to evaluate some of the specifics of each guideline or policy. The search was conducted using an online query and a follow-up email request to each state chapter of ACEP. We found that 17 states had emergency department-specific guidelines. We further organized the guidelines into four categories: limiting prescriptions for opioids with 67 total recommendations; preventing/diverting abuse with 56 total recommendations; addiction-related guidelines with 29 total recommendations; and a community resources section with 24 total recommendations. Our results showed that current state guidelines focus on providers limiting opioid pain prescriptions and vetting patients for possible abuse/diversion. This study highlights the 17 states that have addressed opioid prescribing guidelines and categorizes their efforts to date. It is hoped that this study will provide the basis for similar efforts in other states.

Storage options in the United States of America

International Nuclear Information System (INIS)

Williams, J.; Richardson, J.

1994-01-01

The inventory of spent fuel from commercial reactors in the United States is nearly 25 000 metric tons heavy metal (MTHM) and is increasing at a rate of about 2000 MTHM per year. By the time the last licence for the current generation of nuclear reactors expires, the inventory of spent fuel is expected to be about 85 000 MTHM. Almost all of the spent fuel is stored in water pools at reactor sites, but dry storage has begun to be used by several utilities that have used up their pool capacity. Eventually the spent fuel will be transferred to the Federal waste-management system now being developed by the U.S. Department of Energy (DOE). The DOE is developing a waste-management system consisting of three components: a geologic repository, a facility for monitored retrievable storage (MRS), and a transportation system to support MRS and repository operations. This paper briefly describes how the commercial nuclear utilities are addressing spent fuel storage at their reactor sites and the DOE's strategy for interfacing with the utilities. (author)

Gas storage materials, including hydrogen storage materials

Science.gov (United States)

Mohtadi, Rana F; Wicks, George G; Heung, Leung K; Nakamura, Kenji

2013-02-19

A material for the storage and release of gases comprises a plurality of hollow elements, each hollow element comprising a porous wall enclosing an interior cavity, the interior cavity including structures of a solid-state storage material. In particular examples, the storage material is a hydrogen storage material such as a solid state hydride. An improved method for forming such materials includes the solution diffusion of a storage material solution through a porous wall of a hollow element into an interior cavity.

Militarised violence in the service of state-imposed emergencies over Palestine and Kenya

Directory of Open Access Journals (Sweden)

Annie Pfingst

2015-02-01

Full Text Available States of Emergency are declared against the disorder-ing of state sovereign power by acts of resistance, rebellion and revolt and are characterised by the technologies of control, containment and punishment. Through spatial, archival and visual encounters with emergency landscapes and the geographies of resistance, the essay considers the historic and contemporary operations, provisions, regulations and practices authorised under state-imposed emergencies. It does so in order firstly, to bring attention to the practices authorised through state-imposed emergencies and the currency and saliency of their ongoing effects, and secondly to re-frame the militarised violence of settlement/occupation as an integral part of state-imposed emergencies in which all that is necessary will be done to protect the sovereign state from the resistance of the colonised/occupied and to effect a return to ‘order’.     Through encounters with the archival record, and the architectures, remnants and territorial arrangements found in post-colonial Kenya and across the multiple geographies of Palestine, the essay draws out seven clusters of state imposed emergency practices and effects. The work grapples with a number of questions: what is it that a declared state of emergency performs for the state? Does a state of emergency enable particular forms of militarised violence? Are there common practices to be found across different modes of state-imposed emergencies? What is the genealogy to the states of emergency across Palestine and Kenya? Does our excavation of the practices of state-imposed emergency shed light on the ways we apprehend state violence in colonial, post-colonial and neo-colonial geographies?

Carbon storage and sequestration by trees in urban and community areas of the United States

International Nuclear Information System (INIS)

Nowak, David J.; Greenfield, Eric J.; Hoehn, Robert E.; Lapoint, Elizabeth

2013-01-01

Carbon storage and sequestration by urban trees in the United States was quantified to assess the magnitude and role of urban forests in relation to climate change. Urban tree field data from 28 cities and 6 states were used to determine the average carbon density per unit of tree cover. These data were applied to statewide urban tree cover measurements to determine total urban forest carbon storage and annual sequestration by state and nationally. Urban whole tree carbon storage densities average 7.69 kg C m −2 of tree cover and sequestration densities average 0.28 kg C m −2 of tree cover per year. Total tree carbon storage in U.S. urban areas (c. 2005) is estimated at 643 million tonnes ($50.5 billion value; 95% CI = 597 million and 690 million tonnes) and annual sequestration is estimated at 25.6 million tonnes ($2.0 billion value; 95% CI = 23.7 million to 27.4 million tonnes). -- Highlights: •Total tree carbon storage in U.S. urban areas (c. 2005) is estimated at 643 million tonnes. •Total tree carbon storage in U.S. urban and community areas is estimated at 1.36 billion tonnes. •Net carbon sequestration in U.S. urban areas varies by state and is estimated at 18.9 million tonnes per year. •Overlap between U.S. forest and urban forest carbon estimates is between 247 million and 303 million tonnes. -- Field and tree cover measurements reveal carbon storage and sequestration by trees in U.S. urban and community areas

Summary of State-of-the-Art Power Conversion Systems for Energy Storage Applications

Energy Technology Data Exchange (ETDEWEB)

Atcitty, S.; Gray-Fenner, A.; Ranade, S.

1998-09-01

The power conversion system (PCS) is a vital part of many energy storage systems. It serves as the interface between the storage device, an energy source, and an AC load. This report summarizes the results of an extensive study of state-of-the-art power conversion systems used for energy storage applications. The purpose of the study was to investigate the potential for cost reduction and performance improvement in these power conversion systems and to provide recommendations for fiture research and development. This report provides an overview of PCS technology, a description of several state-of-the-art power conversion systems and how they are used in specific applications, a summary of four basic configurations for l:he power conversion systems used in energy storage applications, a discussion of PCS costs and potential cost reductions, a summary of the stancku-ds and codes relevant to the technology, and recommendations for future research and development.

State of emergency medicine in Azerbaijan.

Science.gov (United States)

Sule, Harsh; Kazimov, Shirin; Shahmaliyev, Oktay; Sirois, Adam

2008-04-01

There has been no previous study into the state of emergency medicine in Azerbaijan. As a legacy of the Soviet Semashko system, the "specialty" model of emergency medicine and integrated emergency departments do not exist here. Instead, pre-hospital emergency care is delivered by ambulance physicians and in-hospital care by individual departments, often in specialty hospitals. Emergency care is therefore fragmented, highly specialized and inefficient. The Emergency Medicine Development Initiative (EMDI) of the International Medical Corps (IMC) was designed to improve the quality of emergency care in four pilot regional centers in Azerbaijan. The objective of this study was to assess the baseline emergency medical capacity of these four centers. EMDI staff conducted a four-part baseline survey in April 2006 to assess emergency care in Ganja (the second largest city in Azerbaijan), Kurdamir, Shamkir and Yevlakh. Data collection involved interviews with relevant personnel and a retrospective records review in each city. Pre-hospital: The number of ambulance teams per 10,000 inhabitants is below the number required by local regulations. On average, 45% of 27 medications and 37% of 17 pieces of critical equipment were available. Of the emergency procedures, 21% could be performed in the pre-hospital setting. In-hospital: Admission rates were near 100% for the admissions department-an area that is supposed to function as an emergency department would. On average 57% of 40 medications and 42% of 22 pieces of critical equipment were available. Of the emergency procedures, 62% could be performed in the in-hospital setting. The emergency medical system surveyed in Azerbaijan is inefficiently organized, under-financed, poorly equipped and lacks adequately trained staff. Reforms need to be directed towards achieving international standards, while adapting new models for service delivery into the existing framework and improving system capacity as highlighted by this baseline

The crisis in United States hospital emergency services.

Science.gov (United States)

Harrison, Jeffrey P; Ferguson, Emily D

2011-01-01

Emergency services are critical for high-quality healthcare service provision to support acute illness, trauma and disaster response. The greater availability of emergency services decreases waiting time, improves clinical outcomes and enhances local community well being. This study aims to assess United States (U.S.) acute care hospital staffs ability to provide emergency medical services by evaluating the number of emergency departments and trauma centers. Data were obtained from the 2003 and 2007 American Hospital Association (AHA) annual surveys, which included over 5000 US hospitals and provided extensive information on their infrastructure and healthcare capabilities. U.S. acute care hospital numbers decreased by 59 or 1.1 percent from 2003 to 2007. Similarly, U.S. emergency rooms and trauma centers declined by 125, or 3 percent. The results indicate that US hospital staffs ability to respond to traumatic injury and disasters has declined. Therefore, US hospital managers need to increase their investment in emergency department beds as well as provide state-of-the-art clinical technology to improve emergency service quality. These investments, when linked to other clinical information systems and the electronic medical record, support further healthcare quality improvement. This research uses the AHA annual surveys,which represent self-reported data by individual hospital staff. However, the AHA expendssignificant resources to validate reported information and the annual survey data are widely used for hospital research. The declining US emergency rooms and trauma centers have negative implications for patients needing emergency services. More importantly, this research has significant policy implications because it documents a decline in the US emergency healthcare service infrastructure. This article has important information on US emergency service availability in the hospital industry.

On Emergent Physics, "Unparticles" and Exotic "Unmatter" States

Directory of Open Access Journals (Sweden)

Goldfain E.

2008-10-01

Full Text Available Emergent physics refers to the formation and evolution of collective patterns in systems that are nonlinear and out-of-equilibrium. This type of large-scale behavior often de- velops as a result of simple interactions at the component level and involves a dynamic interplay between order and randomness. On account of its universality, there are credi- ble hints that emergence may play a leading role in the Tera-ElectronVolt (TeV sector of particle physics. Following this path, we examine the possibility of hypothetical high- energy states that have fractional number of quanta per state and consist of arbitrary mixtures of particles and antiparticles. These states are similar to “un-particles”, mass- less fields of non-integral scaling dimensions that were recently conjectured to emerge in the TeV sector of particle physics. They are also linked to “unmatter”, exotic clusters of matter and antimatter introduced few years ago in the context of Neutrosophy.

On Emergent Physics, "Unparticles" and Exotic "Unmatter" States

Directory of Open Access Journals (Sweden)

Smarandache F.

2008-10-01

Full Text Available Emergent physics refers to the formation and evolution of collective patterns in systems that are nonlinear and out-of-equilibrium. This type of large-scale behavior often develops as a result of simple interactions at the component level and involves a dynamic interplay between order and randomness. On account of its universality, there are credible hints that emergence may play a leading role in the Tera-ElectronVolt (TeV sector of particle physics. Following this path, we examine the possibility of hypothetical high-energy states that have fractional number of quanta per state and consist of arbitrary mixtures of particles and antiparticles. These states are similar to "un-particles", massless fields of non-integral scaling dimensions that were recently conjectured to emerge in the TeV sector of particle physics. They are also linked to "unmatter", exotic clusters of matter and antimatter introduced few years ago in the context of Neutrosophy.

Identifying Critical Factors in the Cost-Effectiveness of Solar and Battery Storage in Commercial Buildings

Energy Technology Data Exchange (ETDEWEB)

McLaren, Joyce A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Anderson, Katherine H. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Laws, Nicholas D. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Gagnon, Pieter J. [National Renewable Energy Lab. (NREL), Golden, CO (United States); DiOrio, Nicholas A. [National Renewable Energy Lab. (NREL), Golden, CO (United States); Li, Xiangkun [National Renewable Energy Lab. (NREL), Golden, CO (United States)

2018-02-21

This analysis elucidates the emerging market for distributed solar paired with battery energy storage in commercial buildings across the United States. It provides insight into the near-term and future solar and solar-plus-storage market opportunities as well as the variables that impact the expected savings from installing behind-the-meter systems.

Development of a state radioactive materials storage facility

International Nuclear Information System (INIS)

Schmidt, P.S.

1995-01-01

The paper outlines the site selection and facility development processes of the state of Wisconsin for a radioactive materials facility. The facility was developed for the temporary storage of wastes from abandoned sites. Due to negative public reaction, the military site selected for the facility was removed from consideration. The primary lesson learned during the 3-year campaign was that any project involving radioactive materials is a potential political issue

Energy storage systems: a strategic road-book

International Nuclear Information System (INIS)

2011-01-01

Dealing with the development and deployment of thermal and electric energy storage systems, this report first identifies four main challenges: to take environmental challenges into account during all the storage system life (design, production, use, end of life), to integrate the issue of economic valorization of the device into its design phase, to promote the development of standards, to make an institutional and legal framework emerge. It defines the geographical scope and the time horizon for the development of these systems. It evokes research and development programs in the United States, Japan, China, Germany and the European Union. These programs concern: mobile electric storage systems, electric storage systems in support of energy networks and renewable energies, heat storage systems. The authors outline that business models are now favourable to the deployment of storage systems. They discuss some key technological and economical parameters. They propose some prospective visions by 2050 with different possible orientations for this sector. They also identify and discuss the possible technological and socio-economical obstacles, research priorities, and stress the importance of implementing experimental platforms and research demonstrators

State gun safe storage laws and child mortality due to firearms.

Science.gov (United States)

Cummings, P; Grossman, D C; Rivara, F P; Koepsell, T D

1997-10-01

Since 1989, several states have passed laws that make gun owners criminally liable if someone is injured because a child gains unsupervised access to a gun. These laws are controversial, and their effect on firearm-related injuries is unknown. To determine if state laws that require safe storage of firearms are associated with a reduction in child mortality due to firearms. An ecological study of firearm mortality from 1979 through 1994. All 50 states and the District of Columbia. All children younger than 15 years. Unintentional deaths, suicides, and homicides due to firearms. Laws that make gun owners responsible for storing firearms in a manner that makes them inaccessible to children were in effect for at least 1 year in 12 states from 1990 through 1994. Among children younger than 15 years, unintentional shooting deaths were reduced by 23% (95% confidence interval, 6%-37%) during the years covered by these laws. This estimate was based on within-state comparisons adjusted for national trends in unintentional firearm-related mortality. Gun-related homicide and suicide showed modest declines, but these were not statistically significant. State safe storage laws intended to make firearms less accessible to children appear to prevent unintentional shooting deaths among children younger than 15 years.

Expecting the unexpected [The IAEA's Incident and Emergency Centre helps prepare States to face radiological emergencies

International Nuclear Information System (INIS)

Stern, W.; Buglova, E.

2007-01-01

The IAEA works with its partners worldwide to promote safe, secure and peaceful nuclear technologies. The IAEA's Statute assigns functions to the Secretariat in relation to radiation emergencies, including fostering international cooperation in the area of emergency preparedness and response. The Convention on Early Notification of a Nuclear Accident and the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (often called the 'Emergency Conventions') place specific legal obligations on the IAEA with regard to emergency preparedness and response. In 2005, the IAEA established a fully integrated Incident and Emergency Centre (IEC) which acts as the global focal point for international preparedness, communication and response to nuclear and radiological incidents or emergencies irrespective of their cause. In this role, the IEC stands at the centre of coordinating effective and efficient activities worldwide. While emergency response capabilities have existed within the IAEA since concluding the Emergency Conventions in the 1980s, the decision to create an integrated Centre within the IAEA became more pressing with the growing use of nuclear applications worldwide as well as increasing concern over malicious use of nuclear or radioactive materials. Today, the IEC provides around-the-clock assistance to States dealing with nuclear and radiological events. Under the Emergency Conventions, the IEC coordinates actions of global experts and efforts within the IAEA. It also helps coordinate the responses of States as well as other international organizations, such as the WHO (World Health Organization), FAO (Food and Agricultural Organization) or WMO (World Meteorological Organization) in case of a nuclear or radiological emergency. Response to incidents and emergencies can involve exchange of information, provision of advice and/or coordination of field response. The IEC ensures that the IAEA's incident and emergency arrangements are fully

Dissociative Recombination of HD+ - State-to-State Experimental Investigation Using Fragment Imaging and Storage Ring Techniques

International Nuclear Information System (INIS)

Amitay, Z.; Baer, A.; Dahan, M.; Levin, J.; Vager, Z.; Zajfman, D.

1998-01-01

When a molecular ion collides with a free electron it can capture the electron and dissociate. The resulting process of Dissociative Recombination (DR) is a process of great significance in a wide variety of plasma environments. In this process, the capture of a free electron leads to the formation of an highly excited state of the neutral molecule, which then dissociates into neutral fragments with kinetic energy and, possibly, internal excitation depending on the energy balance of the reaction. Despite its importance, the DR process is still not yet completely understood theoretically. This is mainly due to the complexity of the nature and dynamics of highly excited molecular states, especially when several channels are involved, as is usually the situation in DR. from experimental point of view, for direct comparison between experiment and theory, this complexity requires detailed experimental data, including the knowledge of both the initial state of the molecular ion, to which DR is very sensitive, and of the final quantum states of the DR products. Inherent un- certainties in the initial vibrational excitation of the laboratory molecular ions was the main drawback of the experiments conducted over the years to, study DR. A substantial progress in the understanding of the DR process was achieved with the introduction (about five years ago) of a new experimental approach, which uses heavy-ion storage ring technique. In a storage ring, one can store many molecular ions for a time which is long enough to allow complete radiative deexcitation of tile initial electronic and vibrational excitation coming from the ion source. Those vibrationally cold ions are then merged with an intense electron beam to measure their DR cross section. Further experimental progress was the inclusion of two and three-dimensional molecular imaging techniques [1] for the measurement of the branching ratio to different final quantum states of the neutral DR fragments. This talk will

Underground gas storage in the World - 2013 (fifth Edition)

International Nuclear Information System (INIS)

Cornot-Gandolphe, Sylvie

2013-07-01

Since its first publication in 1990, 'Underground Gas Storage in the World' has been the industry's reference on underground gas storage (UGS). The updated 2013 edition includes in-depth CEDIGAZ's analyses of the latest developments and trends in the storage industry all over the world as well as extensive country analyses with complete datasets including current, under construction and planned Underground Gas Storage facilities in 48 countries. It describes the 688 existing storage facilities in the world and the 236 projects under construction and planned. Future storage demand and its main drivers are presented at global and regional levels. 'Underground Gas Storage in the World 2013' builds on the CEDIGAZ Underground Gas Storage Database, the only worldwide Underground Gas Storage database to be updated every year. The Survey includes four main parts: The first part gives an overview of underground gas storage in the world at the beginning of 2013 and analyzes future storage needs by 2030, at regional and international levels. The second part focuses on new trends and issues emerging or developing in key storage markets. It analyzes the emerging storage market in China, reviews the storage business climate in Europe, examines Gazprom's storage strategy in Europe, and reviews recent trends in storage development in the United States. The third part gives some fundamental background on technical, economic and regulatory aspects of gas storage. The fourth part gives a countrywide analysis of the 48 countries in the world holding underground gas storage facilities or planning storage projects. 48 countries surveyed, 688 existing UGS facilities, 256 projects under construction or planned. The document includes 70 tables, 72 charts and figures, 44 country maps. The countries surveyed are: Europe : Albania, Austria, Belgium, Bosnia, Bulgaria, Croatia, Czech Republic, Denmark, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Netherlands, Poland

Nationwide survey, assessment, and replacement designs of tank systems at 430 emergency broadcast stations

International Nuclear Information System (INIS)

Maraj, R.; Whitaker-Sheppard, L.

1994-01-01

The Federal Emergency Management Agency (FEMA), acting on behalf of the Federal Communications Commission (FCC), undertook a program to bring into compliance federally-owned underground storage tanks (USTs) at radio and television stations, which are part of the Broadcast Station Protection Program (BSPP) of the Emergency Broadcast System (EBS). These USTs supply fuel (diesel and gasoline) to emergency generators and are located on private property. Woodward-Clyde Federal Services is under contract with FEMA to provide assistance in all phases of the program. The BSPP is designed to protect selected stations that are participants in the EBS, which support emergency preparedness and response operations. Technical standards for installation, spill and overfill protection, corrosion protection, and leak detection for underground storage tanks (UST) were promulgated by the EPA, as described in 53 Federal Register 37082 (September 23, 1988). December 1998 was established as a compliance data for corrosion protection and spill/overfill protection. A compliance period of December 1989 to December 1993 was established for leak detection devices, depending on the UST installation date. Several states have promulgated underground storage tank regulations that are more stringent than the federal requirements. Local agencies in several states may have additional UST requirements. All federal, state, and local UST requirements must be satisfied under a compliance program. The approach and methodology employed by FEMA are presented

From Agamben State of Emergency to Colombian State of Emergency: A Possibility of Understanding

Directory of Open Access Journals (Sweden)

Juan Carlos López

2017-07-01

Full Text Available The following article seeks to open the possibility of thinking the reality of the Colombian conflict from new conceptual categories, specifically those put forth by Giorgio Agamben, not necessarily to force the facts into the theory, but to open new possibilities of understanding the human tragedy that Colombia has lived (and continues to live in terms of human loss (death policies, of lack of conditions to live a dignified life and of an existence that is zoé (barely existence, stripped from dignity rather than bios (life in political community. The text further proposes the question of whether the Colombian State has become an everlasting State of Emergency that employs it as a normal mode of establishing social and political hegemony

Carbon storage and sequestration by trees in urban and community areas of the United States.

Science.gov (United States)

Nowak, David J; Greenfield, Eric J; Hoehn, Robert E; Lapoint, Elizabeth

2013-07-01

Carbon storage and sequestration by urban trees in the United States was quantified to assess the magnitude and role of urban forests in relation to climate change. Urban tree field data from 28 cities and 6 states were used to determine the average carbon density per unit of tree cover. These data were applied to statewide urban tree cover measurements to determine total urban forest carbon storage and annual sequestration by state and nationally. Urban whole tree carbon storage densities average 7.69 kg C m(-2) of tree cover and sequestration densities average 0.28 kg C m(-2) of tree cover per year. Total tree carbon storage in U.S. urban areas (c. 2005) is estimated at 643 million tonnes ($50.5 billion value; 95% CI = 597 million and 690 million tonnes) and annual sequestration is estimated at 25.6 million tonnes ($2.0 billion value; 95% CI = 23.7 million to 27.4 million tonnes). Published by Elsevier Ltd.

Nanostructured materials for solid-state hydrogen storage: A review of the achievement of COST Action MP1103

NARCIS (Netherlands)

Callini, Elsa; Aguey-Zinsou, Kondo Francois; Ahuja, Rajeev; Ares, Jos Ramon; Bals, Sara; Biliskov, Nikola; Chakraborty, Sudip; Charalambopoulou, Georgia; Chaudhary, Anna Lisa; Cuevas, Fermin; Dam, Bernard; de Jongh, Petra; Dornheim, Martin; Filinchuk, Yaroslav; Novakovic, Jasmina G.; Hirscher, Michael; Hirscher, M.; Jensen, Torben R.; Jensen, Peter Bjerre; Novakovic, Nikola; Lai, Qiwen; Leardini, Fabrice; Gattia, Daniele Mirabile; Pasquini, Luca; Steriotis, Theodore; Turner, Stuart; Vegge, Tejs; Zuttel, Andreas; Montone, Amelia

2016-01-01

In the framework of the European Cooperation in Science and Technology (COST) Action MP1103 Nanostructured Materials for Solid-State Hydrogen Storage were synthesized, characterized and modeled. This Action dealt with the state of the art of energy storage and set up a competitive and coordinated

Nanostructured materials for solid-state hydrogen storage: A review of the achievement of COST Action MP1103

DEFF Research Database (Denmark)

Callini, Elsa; Aguey-Zinsou, Kondo-Francois; Ahuja, Rajeev

2016-01-01

In the framework of the European Cooperation in Science and Technology (COST) Action MP1103 Nanostructured Materials for Solid-State Hydrogen Storage were synthesized, characterized and modeled. This Action dealt with the state of the art of energy storage and set up a competitive and coordinated...

Energy storage

Science.gov (United States)

Kaier, U.

1981-04-01

Developments in the area of energy storage are characterized, with respect to theory and laboratory, by an emergence of novel concepts and technologies for storing electric energy and heat. However, there are no new commercial devices on the market. New storage batteries as basis for a wider introduction of electric cars, and latent heat storage devices, as an aid for solar technology applications, with satisfactory performance standards are not yet commercially available. Devices for the intermediate storage of electric energy for solar electric-energy systems, and for satisfying peak-load current demands in the case of public utility companies are considered. In spite of many promising novel developments, there is yet no practical alternative to the lead-acid storage battery. Attention is given to central heat storage for systems transporting heat energy, small-scale heat storage installations, and large-scale technical energy-storage systems.

Community energy storage and distribution SCADA improvements

International Nuclear Information System (INIS)

Riggins, M.

2010-01-01

The mission of American Electric Power (AEP) is to sustain the real time balance of energy supply and demand. Approximately 2.5 percent of energy generated in the United States (USA) is stored as pumped hydro, compressed air, or in batteries and other devices. This power point presentation discussed the use of SCADA for improving community energy storage (CES) and distribution systems. CES is a distributed fleet of small energy units connected to the transformers in order to serve houses or small commercial loads. CES is operated as a fleet offering multi-megawatt (MW) multi-hour storage. The benefits of CES include backup power, flicker mitigation, and renewable integration. Benefits to the electricity grid include power factor correct, ancillary services, and load leveling at the substation level. SCADA is being used to determine when emergency load reductions are required or when emergency inspections on fans, oil pumps or other devices are needed. An outline of AEP's monitoring system installation plan was also included. tabs., figs.

United States National Waste Terminal Storage argillaceous rock studies

International Nuclear Information System (INIS)

Brunton, G.D.

1981-01-01

The past and present argillaceous rock studies for the US National Waste Terminal Storage Program consist of: (1) evaluation of the geological characteristics of several widespread argillaceous formations in the United States; (2) laboratory studies of the physical and chemical properties of selected argillaceous rock samples; and (3) two full-scale in situ surface heater experiments that simulate the emplacement of heat-generating radioactive waste in argillaceous rock

United States National Waste Terminal Storage argillaceous rock studies

International Nuclear Information System (INIS)

Brunton, G.D.

1979-01-01

The past and present argillaceous rock studies for the US National Waste Terminal Storage Program consist of: (1) evaluation of the geological characteristics of several widespread argillaceous formations in the United States; (2) laboratory studies of the physical and chemical properties of selected argillaceous rock samples; and (3) two full-scale in-situ surface heater experiments that simulate the emplacement of heat-generating radioactive waste in argillaceous rock

Thermal energy storage devices, systems, and thermal energy storage device monitoring methods

Science.gov (United States)

Tugurlan, Maria; Tuffner, Francis K; Chassin, David P.

2016-09-13

Thermal energy storage devices, systems, and thermal energy storage device monitoring methods are described. According to one aspect, a thermal energy storage device includes a reservoir configured to hold a thermal energy storage medium, a temperature control system configured to adjust a temperature of the thermal energy storage medium, and a state observation system configured to provide information regarding an energy state of the thermal energy storage device at a plurality of different moments in time.

Information technology and emergency management: preparedness and planning in US states.

Science.gov (United States)

Reddick, Christopher

2011-01-01

The purpose of this paper is to examine the impact of information technology (IT) on emergency preparedness and planning by analysing a survey of US state government departments of emergency management. The research results show that there has been a significant impact of IT on emergency planning. IT has proven to be effective for all phases of emergency management, but especially for the response phase. There are numerous technologies used in emergency management, ranging from the internet, Geographic Information Systems and wireless technologies to more advanced hazard analysis models. All were generally viewed as being effective. Lack of financial resources and support from elected officials is a perennial problem in public administration, and was found to be prevalent in this study of IT and emergency management. There was evidence that state governments rating high on a performance index were more likely to use IT for emergency management. © 2011 The Author(s). Disasters © Overseas Development Institute, 2011.

Terrorism and emergency preparedness in state and territorial public health departments--United States, 2004.

Science.gov (United States)

2005-05-13

After the events of September 11, 2001, federal funding for state public health preparedness programs increased from $67 million in fiscal year (FY) 2001 to approximately $1 billion in FY 2002. These funds were intended to support preparedness for and response to terrorism, infectious disease outbreaks, and other public health threats and emergencies. The Council of State and Territorial Epidemiologists (CSTE) assessed the impact of funding on epidemiologic capacity, including terrorism preparedness and response, in state health departments in November 2001 and again in May 2004, after distribution of an additional $1 billion in FY 2003. This report describes the results of those assessments, which indicated that increased funding for terrorism preparedness and emergency response has rapidly increased the number of epidemiologists and increased capacity for preparedness at the state level. However, despite the increase in epidemiologists, state public health officials estimate that 192 additional epidemiologists, an increase of 45.3%, are needed nationwide to fully staff terrorism preparedness programs.

Solid State NMR Characterization of Complex Metal Hydrides systems for Hydrogen Storage Applications

Directory of Open Access Journals (Sweden)

Son-Jong Hwang

2011-12-01

Full Text Available Solid state NMR is widely applied in studies of solid state chemistries for hydrogen storage reactions. Use of 11B MAS NMR in studies of metal borohydrides (BH4 is mainly focused, revisiting the issue of dodecaborane formation and observation of 11B{1H} Nuclear Overhauser Effect.

Solid-State Hydrogen Storage

Data.gov (United States)

National Aeronautics and Space Administration — This project will develop a method for converting metals to metal hydrides at low pressures for hydrogen storage systems with high efficiency with respect to volume...

Modeling of storage tank settlement based on the United States standards

Directory of Open Access Journals (Sweden)

Gruchenkova Alesya

2018-01-01

Full Text Available Up to 60% of storage tanks in operation have uneven settlement of the outer bottom contour, which often leads to accidents. Russian and foreign regulatory documents have different requirements for strain limits of metal structures. There is an increasing need for harmonizing regulatory documents. The aim of this study is to theoretically justify and to assess the possibility of applying the U.S. standards for specifying the allowable settlement of storage tanks used in Russia. The allowable uneven settlement was calculated for a vertical steel tank (VST-20000 according to API-653, a standard of the American Petroleum Institute. The calculated allowable settlement levels were compared with those established by Russian standards. Based on the finite element method, the uneven settlement development process of a storage tank was modeled. Stress-strain state parameters of tank structures were obtained at the critical levels established in API-653. Relationships of maximum equivalent stresses in VST metal structures to the vertical settlement component for settlement zones of 6 to 72 m in length were determined. When the uneven settlement zone is 6 m in length, the limit state is found to be caused by 30-mm vertical settlement, while stresses in the wall exceed 330 MPa. When the uneven settlement zone is 36 m in length, stresses reach the yield point only at 100-mm vertical settlement.

State planning for winter energy emergencies: workshop materials

Energy Technology Data Exchange (ETDEWEB)

1978-04-01

Workshops were conducted in 5 cities to improve communications between the states and the Federal government so that both might be better prepared to avoid or mitigate the impacts of energy emergencies during the winter; to provide a forum for the exchange of technical information regarding selected energy demand restraint measures which could be implemented by individual states or regions in an energy emergency; and to promote the concept of pre-crisis contingency planning and strategy development, with particuliar emphasis on the need for interstate coordination of emergency plans. The major topics addressed by the discussion guide involved net energy use impact, implementation procedures and problems, and social and economic effects. The Task Force performed extensive research into the technical considerations and prior experience in implementing each of the demand restraint measures selected for discussion. Results and conclusions are summarized for reduction of thermostat setting for space conditioning and water heating; reduction in hours of operation and lighting in commercial establishments; reduction in hours of operation in school, and industrial fuel substitution. (MCW)

Survey of state and tribal emergency response capabilities for radiological transportation incidents

Energy Technology Data Exchange (ETDEWEB)

Vilardo, F J; Mitter, E L; Palmer, J A; Briggs, H C; Fesenmaier, J [Indiana Univ., Bloomington, IN (USA). School of Public and Environmental Affairs

1990-05-01

This publication is the final report of a project to survey the fifty states, the District of Columbia, Puerto Rico, and selected Indian Tribal jurisdictions to ascertain their emergency-preparedness planning and capabilities for responding to transportation incidents involving radioactive materials. The survey was conducted to provide the Nuclear Regulatory Commission and other federal agencies with information concerning the current level of emergency-response preparedness of the states and selected tribes and an assessment of the changes that have occurred since 1980. There have been no major changes in the states' emergency-response planning strategies and field tactics. The changes noted included an increased availability of dedicated emergency-response vehicles, wider availability of specialized radiation-detection instruments, and higher proportions of police and fire personnel with training in the handling of suspected radiation threats. Most Indian tribes have no capability to evaluate suspected radiation threats and have no formal relations with emergency-response personnel in adjacent states. For the nation as a whole, the incidence of suspected radiation threats declined substantially from 1980 to 1988. 58 tabs.

Buffering Implications for the Design Space of Streaming MEMS Storage

NARCIS (Netherlands)

Khatib, M.G.; Abelmann, Leon; Preas, Kathy

2011-01-01

Emerging nanotechnology-based systems encounter new non-functional requirements. This work addresses MEMS storage, an emerging technology that promises ultrahigh density and energy-efficient storage devices. We study the buffering requirement of MEMS storage in streaming applications. We show that

Radiological transportation emergency response training course funding and timing in the southern states

International Nuclear Information System (INIS)

1991-10-01

The following is a review of the enabling statutes of 16 southern states regarding training for personnel preparing for or responding to a transportation-related emergency involving highway route-controlled quantities of spent fuel and high-level radioactive waste. This report outlines the funding sources and procedures for administering funds for programs attended by state and local officials. Additionally, the report outlines the views of emergency response officials in the southem states concerning the timing and administration of future federal assistance to be provided under section 180(c) of the Nuclear Waste Policy Amendments Act. Under section 180(c) of the Nuclear Waste Policy Amendments Act of 1987, the US Department of Energy (DOE) is required to provide technical assistance and funds to states for training public safety officials of appropriate units of local government and Indian tribes when spent nuclear fuel or high-level radioactive waste is transported through their jurisdictions. The Comprehensive Cooperative Agreement (CCA) is the primary funding mechanism for federal assistance to states for the development of their overall emergency management capabilities. FEMA supports 12 separate emergency management programs including the Emergency Management Training program (EMT). This program provides funds for emergency management training and technical assistance to states for unique state training needs. Funds may be used for instructors, students and other related costs

Hydrogen storage in clathrate hydrates: Current state of the art and future directions

International Nuclear Information System (INIS)

Veluswamy, Hari Prakash; Kumar, Rajnish; Linga, Praveen

2014-01-01

Hydrogen is looked upon as the next generation clean energy carrier, search for an efficient material and method for storing hydrogen has been pursued relentlessly. Improving hydrogen storage capacity to meet DOE targets has been challenging and research efforts are continuously put forth to achieve the set targets and to make hydrogen storage a commercially realizable process. This review comprehensively summarizes the state of the art experimental work conducted on the storage of hydrogen as hydrogen clathrates both at the molecular level and macroscopic level. It identifies future directions and challenges for this exciting area of research. Hydrogen storage capacities of different clathrate structures – sI, sII, sH, sVI and semi clathrates have been compiled and presented. In addition, promising new approaches for increasing hydrogen storage capacity have been described. Future directions for achieving increased hydrogen storage and process scale up have been outlined. Despite few limitations in storing hydrogen in the form of clathrates, this domain receives prominent attention due to more environmental-friendly method of synthesis, easy recovery of molecular hydrogen with minimum energy requirement, and improved safety of the process

Emerging Energy Alternatives for the Southeastern States

Science.gov (United States)

Stefanakos, E. K. (Editor)

1978-01-01

The proceedings of the first symposium on emerging energy alternatives for the Southeastern States are presented. Some topics discussed are: (1) solar energy, (2) wood energy, (3) novel energy sources, (4) agricultural and industrial process heat, (5) waste utilization, (6) energy conservation and (7) ocean thermal energy conversion.

Microencapsulation of salts for enhanced thermochemical storage materials

NARCIS (Netherlands)

Cuypers, R.; Jong, A.J. de; Eversdijk, J.; Spijker, J.C. van 't; Oversloot, H.P.; Ingenhut, B.L.J.; Cremers, R.K.H.; Papen-Botterhuis, N.E.

2013-01-01

Thermochemical storage is a new and emerging long-term thermal storage for residential use (cooling, heating & domestic hot water generation), offering high thermal storage density without the need for thermal insulation during storage (Fig. 1). However, existing materials for thermochemical storage

Monitoring of carbon monoxide in residences with bulk wood pellet storage in the Northeast United States.

Science.gov (United States)

Rossner, Alan; Jordan, Carolyn E; Wake, Cameron; Soto-Garcia, Lydia

2017-10-01

The interest in biomass fuel is continuing to expand globally and in the northeastern United States as wood pellets are becoming a primary source of fuel for residential and small commercial systems. Wood pellets for boilers are often stored in basement storage rooms or large bag-type containers. Due to the enclosed nature of these storage areas, the atmosphere may exhibit increased levels of carbon monoxide. Serious accidents in Europe have been reported over the last decade in which high concentrations of carbon monoxide (CO) have been found in or near bulk pellet storage containers. The aim of this study was to characterize the CO concentrations in areas with indoor storage of bulk wood pellets. Data was obtained over approximately 7 months (December 2013 to June 2014) at 25 sites in New Hampshire and Massachusetts: 16 homes using wood pellet boilers with indoor pellet storage containers greater than or equal to 3 ton capacity; 4 homes with wood pellet heating systems with outdoor pellet storage; 4 homes using other heating fuels; and a university laboratory site. CO monitors were set up in homes to collect concentrations of CO in the immediate vicinity of wood pellet storage containers, and data were then compared to those of homes using fossil fuel systems. The homes monitored in this study provided a diverse set of housing stock spanning two and a half centuries of construction, with homes built from 1774 to 2013, representing a range of air exchange rates. The CO concentration data from each home was averaged hourly and then compared to a threshold of 9 ppm. While concentrations of CO were generally low for the homes studied, the need to properly design storage locations for pellets is and will remain a necessary component of wood pellet heating systems to minimize the risk of CO exposure. This paper is an assessment of carbon monoxide (CO) exposure from bulk wood pellet storage in homes in New Hampshire and Massachusetts. Understanding the CO concentrations

Accidental Release of Chlorine from a Storage Facility and an On-Site Emergency Mock Drill: A Case Study

Directory of Open Access Journals (Sweden)

Ambalathumpara Raman Soman

2015-01-01

Full Text Available In the current industrial scenario there is a serious need for formulating strategies to handle hazardous substances in the safest way. Manufacture, storage, and use of hazardous substances pose a serious risk to industry, people, and the environment. Accidental release of toxic chemicals can lead to emergencies. An emergency response plan (ERP is inevitable to minimize the adverse effects of such releases. The on-site emergency plan is an integral component of any process safety and risk management system. This paper deals with an on-site emergency response plan for a chlorine manufacturing industry. It was developed on the basis of a previous study on chlorine release and a full scale mock drill has been conducted for testing the plan. Results indicated that properly trained personnel can effectively handle each level of incidents occurring in the process plant. As an extensive guideline to the district level government authorities for off-site emergency planning, risk zone has also been estimated with reference to a chlorine exposure threshold of 3 ppm.

Firearm Ownership, Storage Practices, and Suicide Risk Factors in Washington State, 2013-2016.

Science.gov (United States)

Morgan, Erin Renee; Gomez, Anthony; Rowhani-Rahbar, Ali

2018-05-17

To characterize firearm ownership and storage practices in Washington State and assess their relationship with suicide risk factors. Using Washington State Behavioral Risk Factor Surveillance System data for 2013 to 2016, we conducted survey-weighted multivariable Poisson regression models to obtain prevalence ratios (PRs) and confidence intervals (CIs). Of 34 884 adult respondents, 34.3% (95% CI = 33.7%, 35.0%) reported a firearm in their household, among whom 36.6% (95% CI = 35.4%, 37.7%) stored their firearm locked and unloaded. There were no differences in mental health indicators by firearm ownership or storage practice status. Binge and chronic alcohol use were somewhat more prevalent among adults from firearm-owning households (PR = 1.2; 95% CI = 1.1, 1.3; PR = 1.2; 95% CI = 1.1, 1.4, respectively) and among those living in households not practicing safe storage (PR = 1.4; 95% CI = 1.2, 1.7; PR = 1.9; 1.5, 2.3, respectively). Variability in mental health does not explain the substantial increased suicide risk among individuals in firearm-owning households. Greater prevalence of alcohol misuse among adults in firearm-owning households not practicing safe storage highlights the need for suicide prevention interventions. (Am J Public Health. Published online ahead of print May 17, 2018: e1-e7. doi:10.2105/AJPH.2018.304403).

Using energy storage for strategic advantage in competitive electricity markets

International Nuclear Information System (INIS)

Hurwitch, J.W.; Symons, P.

1998-01-01

Energy storage products are emerging for use in power quality, electric transmission and distribution, and renewable energy applications. Despite this emergence into high-value markets, widespread market penetration will only occur when the value of the services that energy storage products can deliver are clearly delineated. The emergence of competitive electricity markets will more clearly define the flexible benefits of energy storage devices. This paper presents a summary of the ESA's position of the status of energy storage technologies, the market barriers, and steps the ESA is undertaking to reduce these barriers. (author)

Tank designs for combined high pressure gas and solid state hydrogen storage

DEFF Research Database (Denmark)

Mazzucco, Andrea

Many challenges have still to be overcome in order to establish a solid ground for significant market penetration of fuel cell hydrogen vehicles. The development of an effective solution for on-board hydrogen storage is one of the main technical tasks that need to be tackled. The present thesis...... deals with the development of a simulation tool to design and compare different vehicular storage options with respect to targets based upon storage and fueling efficiencies. The set targets represent performance improvements with regard to the state-of-the-art technology and are separately defined...... volume. Heat transfer augmentation techniques (e.g. encapsulation) are found to be the reward strategy to achieve the same stored mass and fueling time of the standard technology, while enabling ambient temperature fueling and save the energy cooling demand (4.2 MJ per fueling) at the refueling station....

Emergency response capabilities developed in the United States to deal with nuclear materials transportation accidents

International Nuclear Information System (INIS)

Vandevender, S.G.; Reese, R.T.; Schilling, A.H.

1980-01-01

The non-existence of emergency response programs is frequently stated as a reason for restricting the movement of radioactive materials through states or local jurisdictions. Yet, studies discussed here indicate that emergency response capability, while not in the best condition, is getting more money, interest and attention, and in most states response networks exist which could be effective in responding to radiological emergencies. Awareness of such capabilities by the public is an important feature in increasing the public's confidence in the ability of federal, state and local officials in controlling hazards. One aspect of this awareness program could be in broader availability of radioactive emergency techniques for possible first responders to emergencies. This training, public awareness and more emphasis on workable emergency plans will help to assure reliable and workable emergency response plans

Surface sterilization and duration of seed storage influenced ...

African Journals Online (AJOL)

The effects of factorial combinations of four storage duration (in days after seed extraction) and surface sterilization with three dilution levels of sodium hypochlorite on seedling emergence and seedling quality of African breadfruit were studied. Storage duration significantly influenced days to seedling emergence, ...

State of emergency declared for Gran Sasso

CERN Multimedia

2003-01-01

"On June 27th the Council of Ministers has declared the state of socioeconomic and environmental emergency in the territory of L'Aquila and Teramo, the provinces involved in the safety of the Gran Sasso system. The measure includes the INFN Gran Sasso National Laboratories, the high-way tunnels, the environment in general and water in particular" (1 page).

Fast-opening vacuum switches for high-power inductive energy storage

International Nuclear Information System (INIS)

Cooperstein, G.

1988-01-01

The subject of fast-opening vacuum switches for high-power inductive energy storage is emerging as an exciting new area of plasma science research. This opening switch technology, which generally involves the use of plasmas as the switching medium, is key to the development of inductive energy storage techniques for pulsed power which have a number of advantages over conventional capacitive techniques with regard to cost and size. This paper reviews the state of the art in this area with emphasis on applications to inductive storage pulsed power generators. Discussion focuses on fast-opening vacuum switches capable of operating at high power (≥10 12 W). These include plasma erosion opening switches, ion beam opening switches, plasma filled diodes, reflex diodes, plasma flow switches, and other novel vacuum opening switches

The state of energy storage in electric utility systems and its effect on renewable energy resources

Energy Technology Data Exchange (ETDEWEB)

Rau, N S

1994-08-01

This report describes the state of the art of electric energy storage technologies and discusses how adding intermittent renewable energy technologies (IRETs) to a utility network affects the benefits from storage dispatch. Load leveling was the mode of storage dispatch examined in the study. However, the report recommended that other modes be examined in the future for kilowatt and kilowatt-hour optimization of storage. The motivation to install storage with IRET generation can arise from two considerations: reliability and enhancement of the value of energy. Because adding storage increases cost, reliability-related storage is attractive only if the accruing benefits exceed the cost of storage installation. The study revealed that the operation of storage should not be guided by the output of the IRET but rather by system marginal costs. Consequently, in planning studies to quantify benefits, storage should not be considered as an entity belonging to the system and not as a component of IRETS. The study also indicted that because the infusion of IRET energy tends to reduce system marginal cost, the benefits from load leveling (value of energy) would be reduced. However, if a system has storage, particularly if the storage is underutilized, its dispatch can be reoriented to enhance the benefits of IRET integration.

High-Capacity Hydrogen-Based Green-Energy Storage Solutions For The Grid Balancing

Science.gov (United States)

D'Errico, F.; Screnci, A.

One of the current main challenges in green-power storage and smart grids is the lack of effective solutions for accommodating the unbalance between renewable energy sources, that offer intermittent electricity supply, and a variable electricity demand. Energy management systems have to be foreseen for the near future, while they still represent a major challenge. Integrating intermittent renewable energy sources, by safe and cost-effective energy storage systems based on solid state hydrogen is today achievable thanks to recently some technology breakthroughs. Optimized solid storage method made of magnesium-based hydrides guarantees a very rapid absorption and desorption kinetics. Coupled with electrolyzer technology, high-capacity storage of green-hydrogen is therefore practicable. Besides these aspects, magnesium has been emerging as environmentally friend energy storage method to sustain integration, monitoring and control of large quantity of GWh from high capacity renewable generation in the EU.

Southern state radiological emergency preparedness and response agencies

International Nuclear Information System (INIS)

1988-11-01

This Report provides information on the state agencies assigned to radioactive materials transportation incidents in 16 Southern States Energy Board member states. For each, the report lists the agencies with primary authority for preparedness and response, their responsibilities and personnel within the agencies who can offer additional information on their radioactive materials transportation programs. The report also lists each state's emergency team members and its laboratory and analytical capabilities. Finally, the governor's designee for receiving advance notification of high-level radioactive materials and spent fuel shipments under 10 CFR Parts 71 and 73 of the US Nuclear Regulatory Commission's regulations is listed for each state. Part 71 requires prenotification for large quantity radioactive waste shipments. Part 73 addresses prenotification for spent nuclear reactor fuel shipments

Disparities in access to emergency general surgery care in the United States.

Science.gov (United States)

Khubchandani, Jasmine A; Shen, Connie; Ayturk, Didem; Kiefe, Catarina I; Santry, Heena P

2018-02-01

As fewer surgeons take emergency general surgery call and hospitals decrease emergency services, a crisis in access looms in the United States. We examined national emergency general surgery capacity and county-level determinants of access to emergency general surgery care with special attention to disparities. To identify potential emergency general surgery hospitals, we queried the database of the American Hospital Association for "acute care general hospital," with "surgical services," and "emergency department," and ≥1 "operating room." Internet search and direct contact confirmed emergency general surgery services that covered the emergency room 7 days a week, 24 hours a day. Geographic and population-level emergency general surgery access was derived from Geographic Information Systems and US Census. Of the 6,356 hospitals in the 2013 American Hospital Association database, only 2,811 were emergency general surgery hospitals. Counties with greater percentages of black, Hispanic, uninsured, and low-education individuals and rural counties disproportionately lacked access to emergency general surgery care. For example, counties above the 75th percentile of African American population (10.2%) had >80% odds of not having an emergency general surgery hospital compared with counties below the 25th percentile of African American population (0.6%). Gaps in access to emergency general surgery services exist across the United States, disproportionately affecting underserved, rural communities. Policy initiatives need to increase emergency general surgery capacity nationwide. Copyright © 2017 Elsevier Inc. All rights reserved.

Supply and demand of board-certified emergency physicians by U.S. state, 2005.

Science.gov (United States)

Sullivan, Ashley F; Ginde, Adit A; Espinola, Janice A; Camargo, Carlos A

2009-10-01

The objective was to estimate the emergency medicine (EM) board-certified emergency physician (EP) workforce supply and demand by U.S. state. The 2005 National Emergency Department Inventories-USA provided annual visit volumes for U.S. emergency departments (EDs). We estimated full-time equivalent (FTE) EP demand at each ED by dividing the actual number of visits by the estimated average EP visit volume (3,548 visits/year) and then summing FTEs by state. Our model assumed that at least one EP should be present 24/7 in each ED. The number of EM board-certified EPs per state was provided by the American Board of Medical Specialties (American Board of Emergency Medicine, American Board of Pediatrics) and the American Osteopathic Board of Emergency Medicine. We used U.S. Census Bureau civilian population estimates to calculate EP population density by state. The supply of EM board-certified EPs was 58% of required FTEs to staff all EDs nationally and ranged from 10% in South Dakota to 104% in Hawai'i (i.e., there were more EPs than the estimated need). Texas and Florida had the largest absolute shortages of EM board-certified EPs (2,069 and 1,146, respectively). The number of EM board-certified EPs per 100,000 U.S. civilian population ranged from 3.6 in South Dakota to 13.8 in Washington, DC. States with a higher population density of EM board-certified EPs had higher percent high school graduates and a lower percent rural population and whites. The supply and demand of EM board-certified EPs varies by state. Only one state had an adequate supply of EM board-certified EPs to fully staff its EDs.

Solid-state supercapacitors with ionic liquid gel polymer electrolyte based on poly (3, 4-ethylenedioxythiophene), carbon nanotubes, and metal oxides nanocomposites for electrical energy storage

Science.gov (United States)

Obeidat, Amr M.

Clean and renewable energy systems have emerged as an important area of research having diverse and significant new applications. These systems utilize different energy storage methods such as the batteries and supercapacitors. Supercapacitors are electrochemical energy storage devices that are designed to bridge the gap between batteries and conventional capacitors. Supercapacitors which store electrical energy by electrical double layer capacitance are based on large surface area structured carbons. The materials systems in which the Faradaic reversible redox reactions store electrical energy are the transition metal oxides and electronically conducting polymers. Among the different types of conducting polymers, poly (3, 4- ethylenedioxythiophene) (PEDOT) is extensively investigated owing to its chemical and mechanical stability. Due to instability of aqueous electrolytes at high voltages and toxicity of organic electrolytes, potential of supercapacitors has not been fully exploited. A novel aspect of this work is in utilizing the ionic liquid gel polymer electrolyte to design solid-state supercapacitors for energy storage. Various electrochemical systems were investigated including graphene, PEDOT, PEDOT-carbon nanotubes, PEDOT-manganese oxide, and PEDOT-iron oxide nanocomposites. The electrochemical performance of solid-state supercapacitor devices was evaluated based on cyclic voltammetry (CV), charge-discharge (CD), prolonged cyclic tests, and electrochemical impedance spectroscopy (EIS) techniques. Raman spectroscopy technique was also utilized to analyze the bonding structure of the electrode materials. The graphene solid-state supercapacitor system displayed areal capacitance density of 141.83 mF cm-2 based on high potential window up to 4V. The PEDOT solid-state supercapacitor system was synthesized in acetonitrile and aqueous mediums achieving areal capacitance density of 219.17 mF cm-2. The hybrid structure of solid-state supercapacitors was also

Assessing innovation in emerging energy technologies: Socio-technical dynamics of carbon capture and storage (CCS) and enhanced geothermal systems (EGS) in the USA

International Nuclear Information System (INIS)

Stephens, Jennie C.; Jiusto, Scott

2010-01-01

This study applies a socio-technical systems perspective to explore innovation dynamics of two emerging energy technologies with potential to reduce greenhouse gas emissions from electrical power generation in the United States: carbon capture and storage (CCS) and enhanced geothermal systems (EGS). The goal of the study is to inform sustainability science theory and energy policy deliberations by examining how social and political dynamics are shaping the struggle for resources by these two emerging, not-yet-widely commercializable socio-technical systems. This characterization of socio-technical dynamics of CCS and EGS innovation includes examining the perceived technical, environmental, and financial risks and benefits of each system, as well as the discourses and actor networks through which the competition for resources - particularly public resources - is being waged. CCS and EGS were selected for the study because they vary considerably with respect to their social, technical, and environmental implications and risks, are unproven at scale and uncertain with respect to cost, feasibility, and life-cycle environmental impacts. By assessing the two technologies in parallel, the study highlights important social and political dimensions of energy technology innovation in order to inform theory and suggest new approaches to policy analysis.

The mechanism of the emergence of distinct overstretched DNA states

Energy Technology Data Exchange (ETDEWEB)

Zhu, You-Liang; Sun, Zhao-Yan, E-mail: zysun@ciac.ac.cn [State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022 (China); Lu, Zhong-Yuan [State Key Laboratory of Supramolecular Structure and Materials, Institute of Theoretical Chemistry, Jilin University, Changchun 130023 (China)

2016-01-14

Although multiple overstretched DNA states were identified in experiments, the mechanism of the emergence of distinct states is still unclear. Molecular dynamics simulation is an ideal tool to clarify the mechanism, but the force loading rates in stretching achieved by conventional all-atom DNA models are much faster, which essentially affect overstretching states. We employed a modified coarse-grained DNA model with an unprecedented low loading rate in simulations to study the overstretching transitions of end-opened double-stranded DNA. We observed two-strand peeling off for DNA with low stability and the S-DNA with high stability under tension. By introducing a melting-forbidden model which prevents base-pair breaking, we still observed the overstretching transition induced by the formation of S-DNA due to the change of dihedral angle. Hence, we confirmed that the competition between the two strain-softening manners, i.e., base-pair breaking and dihedral angle variation, results in the emergence of distinct overstretched DNA states.

Emerging solid-state laser technology by lidar/DIAL remote sensing

Science.gov (United States)

Killinger, Dennis

1992-01-01

Significant progress has been made in recent years in the development of new, solid-state laser sources. This talk will present an overview of some of the new developments in solid-state lasers, and their application toward lidar/DIAL measurements of the atmosphere. Newly emerging lasers such as Ho:YAG, Tm:YAG, OPO, and Ti:Sapphire will be covered, along with the spectroscopic parameters required for differential operational modes of atmospheric remote sensing including Doppler-Windshear lidar, Tunable laser detection of water/CO2, and broad linewidth OPO's for open path detection of pollutant hydrocarbon gases. Additional considerations of emerging laser technology for lidar/DIAL will also be covered.

Optical storage studies on the trapping states of BaFCl:Eu sup 2 sup +

CERN Document Server

Meng Xian Guo; Sun Li; Jin Hui; Zhang Li

2003-01-01

The optical absorption spectra of BaF sub 2 sub - sub x Cl sub x :Eu in different states of optical storage were measured to clarify the electron trapping mechanism for its optical storage and photo-stimulated luminescence (PSL). Based on the absorption spectra and difference absorption spectra, the electron transfer processes after ultraviolet (UV) light irradiation were investigated. This demonstrates that (1) Eu sup 3 sup + ions are formed upon UV light irradiation at room temperature; (2) the two absorption bands in the visible region (400-600 nm) should be assigned to two different F centres, both of which contribute to the optical storage and PSL, and (3) a third broad difference absorption band around approx 650 nm, which matches the common laser better, was observed.

[Current state of measures to deal with natural disasters at public universities].

Science.gov (United States)

Hirouchi, Tomoko; Tanka, Mamoru; Shimada, Ikuko; Yoshimoto, Yoshinobu; Sato, Atsushi

2012-03-01

The responsibility of a university after a large-scale, natural disaster is to secure the safety of students' and local residents' lives. The present study investigated the current state of measures at public universities to deal with natural disasters in coordination with the local community. A survey was administered at 77 public universities in Japan from March 25 to May 10, 2011. The survey included questions on the existence of local disaster evacuation sites, a disaster manual, disaster equipment storage, emergency drinking water, and food storage. A total of 51% of universities had designated local evacuation sites. Based on responses for the remaining questions, universities with and without the designated disaster response solutions accounted for 42% and 57%, respectively, for disaster manuals; 55% and 33%, respectively, for disaster equipment; 32% and 13%, respectively, for disaster drinking water storage; and 26% and 7%, respectively, for emergency food storage. A majority of public universities have not created disaster manuals, regardless of whether they have a local evacuation site. The survey results also indicated that most universities have no storage of disaster equipment or emergency supplies.

Web of Objects Based Ambient Assisted Living Framework for Emergency Psychiatric State Prediction

Science.gov (United States)

Alam, Md Golam Rabiul; Abedin, Sarder Fakhrul; Al Ameen, Moshaddique; Hong, Choong Seon

2016-01-01

Ambient assisted living can facilitate optimum health and wellness by aiding physical, mental and social well-being. In this paper, patients’ psychiatric symptoms are collected through lightweight biosensors and web-based psychiatric screening scales in a smart home environment and then analyzed through machine learning algorithms to provide ambient intelligence in a psychiatric emergency. The psychiatric states are modeled through a Hidden Markov Model (HMM), and the model parameters are estimated using a Viterbi path counting and scalable Stochastic Variational Inference (SVI)-based training algorithm. The most likely psychiatric state sequence of the corresponding observation sequence is determined, and an emergency psychiatric state is predicted through the proposed algorithm. Moreover, to enable personalized psychiatric emergency care, a service a web of objects-based framework is proposed for a smart-home environment. In this framework, the biosensor observations and the psychiatric rating scales are objectified and virtualized in the web space. Then, the web of objects of sensor observations and psychiatric rating scores are used to assess the dweller’s mental health status and to predict an emergency psychiatric state. The proposed psychiatric state prediction algorithm reported 83.03 percent prediction accuracy in an empirical performance study. PMID:27608023

Olympic Diplomacy and the Emerging States: Striving for Influence in the Multipolar World

Directory of Open Access Journals (Sweden)

Luša Đana

2017-09-01

Full Text Available The world of sports is a reflection of the world of politics. It is becoming increasingly multipolar with the emerging states hosting mega sporting events. Firstly, the article problematizes the concept of multipolarity and, secondly, globalisation by questioning whether the Olympic Games reinforce national identities and promote national interests by using Olympic diplomacy as a soft power tool. In doing so, the article explores the correlation between the changes in international affairs and the hosting of and participation at the Olympic Games by emerging states such as Brazil, China and Russia. The analysis distinguishes globalisation from the role of the nation-state, by highlighting the evident differences between emerging states in terms of hosting the Games, but also takes into consideration geopolitical and geo-economic parameters.

Voltage Scheduling Droop Control for State-of-Charge Balance of Distributed Energy Storage in DC Microgrids

DEFF Research Database (Denmark)

Li, Chendan; Dragicevic, Tomislav; Aldana, Nelson Leonardo Diaz

2014-01-01

Due to higher power quality, lower conversion loss, and more DC loads, there has been an increasing awareness on DC microgrid. Previous emphasis has been on equal power sharing among different units in the DC microgrid, while overlooking the coordination of the energy storage units to maintain...... the State-of-Charge balance. In this paper, a new droop method based on voltage scheduling for State-of-Charge balance is proposed to keep the SoC balance for the energy storage units. The proposed method has the advantage of avoiding the stability problem existed in traditional methods based on droop gain...... scheduling. Simulation experiment is taken in Matlab on a DC microgrid with two distributed energy storage units. The simulation results show that the proposed method has successfully achieved SoC balance during the load changes while maintaining the DC bus voltage within the allowable range....

Hydrogen storage: state-of-the-art and future perspective

International Nuclear Information System (INIS)

Tzimas, E.; Filiou, C.; Peteves, S.D.; Veyret, J.B.

2003-01-01

The EU aims at establishing a sustainable energy supply, able to provide affordable and clean energy without increasing green house gas emissions. Hydrogen and fuel cells are seen by many as key energy system solutions for the 21. century, enabling clean and efficient production of power and heat from a broad range of primary energy sources. To be effective, there is a crucial need for well-coordinated research, development and deployment at European Level. The particular segment of hydrogen storage is one key element of the full hydrogen chain and it must meet a number of challenges before it is introduced into the global energy system. Regarding its energy characteristics, the gravimetric energy density of hydrogen is about three times higher than gasoline, but its energy content per volume is about a quarter. Therefore, the most significant problem for hydrogen (in particular for on-board vehicles) is to store sufficient -amounts of hydrogen. The volumetric energy density of hydrogen can be increased by compression or liquefaction which are both the most mature technologies. Still the energy required for both compression and liquefaction is one element to be properly assessed in considering the different pathways in particular for distribution. As far as on-board vehicle storage is concerned all possible options (compressed, liquid, metal hydrides and porous structures) have their own advantages and disadvantages with respect to weight, volume, energy efficiency, refuelling times, cost and safety aspects. To address these problems, long-term commitments to scientific excellence in research, coupled with co-ordination between the many different stakeholders, is required. In the current state-of-the-art in hydrogen storage, no single technology satisfies all of the criteria required by manufacturers and end-users, and a large number of obstacles have to be overcome. The current hydrogen storage technologies and their associated limitations/needs for improvement

Non-uniform regulations of underground storage tanks in the United States

International Nuclear Information System (INIS)

Nadim, F.; Hoag, G.E.; Liu, S.; Carley, R.J.; Zack, P.

2000-01-01

Leaking underground storage tanks (USTs) are one of the major sources of ground water contamination. United States federal regulations for USTs were established in September of 1988. Since that time little or no amendments have been made to these regulations. In order to protect sensitive areas such as aquifer recharge zones for public water supply wells and wetlands, different states have been obligated to apply more stringent standards than the federal UST regulations. This practice however, has led to a non-uniform application of regulations for USTs throughout the country. In this article, United States regulations for USTs are reviewed and its deficits are highlighted. Based on these regulations and the experience of northeastern states of United States, a sequence of leak and spill preventive measures for USTs is proposed. Application of the proposed measures could substantially reduce the possibility of UST failure and would be more protective of the subsurface environment. (author)

Federal/State Jurisdictional Split: Implications for Emerging Electricity Technologies

Energy Technology Data Exchange (ETDEWEB)

Dennis, Jeffery S. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Kelly, Suedeen G. [Akin Gump Strauss Hauer & Feld LLP, Washington, DC (United States); Nordhaus, Robert R. [Van Ness Feldman, LLP, Washington, DC (United States); Smith, Douglas W. [Van Ness Feldman, LLP, Washington, DC (United States)

2016-12-01

The first Administration-wide Quadrennial Energy Review (QER), released in April 2015, found that the “interacting and overlapping” division of authority between “federal, regional and state institutions and regulatory structures” for the electricity sector could “impede development of the grid of the future [and] . . . the development of markets that efficiently integrate” new and emerging technologies.1 While “technology is indifferent to state-Federal boundaries and jurisdictions,” the QER explained, “technology users cannot be.”2 The report concluded that “[b]oth Federal and state governments need to play constructive and collaborative roles in the future to ensure that consumers and industry are able to maximize the value of new technologies.”3 The QER recommended that the Department of Energy (“DOE”) facilitate such collaboration by playing a “convening role” to bring together state and federal regulators and other stakeholders to consider these issues.4 This paper provides background and analysis on these jurisdictional issues and the impact they may have on adoption of emerging energy technologies and coordination of markets for those technologies, in support of future dialogs on these subjects. In particular, this paper reviews the structure of the Federal Power Act (“FPA”),5 and compares the division of authority between the federal and state governments adopted there with other federal energy and energy-related statutes.

50% of emergency oil and fuel stocks to be stored by investors

International Nuclear Information System (INIS)

Beer, G.

2004-01-01

The State Material Reserves Administration Office (SMRAO) plans to transfer the administration of about 50% of Slovakian's emergency oil and fuel stocks to investors. Private companies would help to build storage reservoirs and tanks that would allow the storage of strategic stocks to cover consumption in Slovakia for 90 days. The public procurement process is set to start at the end of this year. It should determine who will be awarded contracts for the next 20 years. Up to now, emergency stocks have been stored at Slovnaft, Transpetrol and SMRAO. The storage capacities of SMRAO no longer meet ecological standards. It is estimated that about 660 mil. Sk (16.58 mil. Eur) will be required for the storage capacities to meet the standards. The most expensive item will be the construction of new reservoirs. SMRAO expects this will cost at least 3 bill. Sk (75.35 mil. Eur). SMRAO chairman, Jan Tusim expects that private investors will welcome this opportunity. SMRAO plans to store 5 0% of stocks in private reservoirs and the remaining part in SMRAO reservoirs. Private investors will be obliged to fill the storage reservoirs and pay rent for their usage. The lowest running costs submitted by companies in the tender will determine the tender winner. (author)

Who killed Rambhor?: The state of emergency medical services in India

Directory of Open Access Journals (Sweden)

Rajesh H Garg

2012-01-01

Full Text Available In India, the healthcare delivery system starts up from the sub-center at the village level and reaches up to super specialty medical centers providing state of the art emergency medical services (EMS. These highest centers, located in big cities, are considered the last referral points for the patients from nearby cities and states. As the incidents of rail and road accidents have increased in recent years, the role of EMS becomes critical in saving precious lives. But when the facilities and management of these emergency centers succumbs before the patient, then the question arises regarding the adequate availability and quality of EMS. The death of an unknown common man, Rambhor, for want of EMS in three big hospitals in the national capital of India put a big question on the "health" of the emergency health services in India. The emergency services infrastructure seems inadequate and quality and timely provision of EMS to critical patients appears unsatisfactory. There is lack of emergency medicine (EM specialists in India and also the postgraduation courses in EM have not gained foot in our medical education system. Creation of a Centralized Medical Emergency Body, implementation of management techniques, modification of medical curriculum, and fixing accountability are some of the few steps which are required to improve the EMS in India.

Emerging risk issues in underground storage of bituminous coal

Energy Technology Data Exchange (ETDEWEB)

Sipila, J.

2013-11-01

This thesis aims to address the root causes and means of prevention, mitigation and other improvements to the challenges from smouldering fires, coal freezing and occupational risk in an underground storage silo built into granite bedrock. In addition, appropriate performance indicators are suggested, and the benefits of the recommended or adopted actions are estimated. The issues and observed incidents demonstrate hazards that are largely classified to represent issues of emerging risk. To reduce the fire risk, successful measures included bottom maintenance door sealing and modified design of silo filling and discharge. The assessed benefits of these actions suggest a payback period of only about 10 days, assuming that, without these measures, a fire like the one in 2008 could occur once in four years. Additional recommendations are made to reduce air flow through the coal bed and near the silo ceiling, and to improve nitrogen purging at the hoppers. Filling with subzero coal can freeze silo drains, resulting in water inflow and further freezing to hamper discharge. As the heat flow is unlike any previously known cases of coal freezing, conventional mitigation e.g. by freeze conditioning agents, would not help. After implementing modified filling procedures for cold coal, no severe freezing cases have occurred. Safety advantages from the automated and remotely controlled operation do not necessarily apply under exceptional circumstances requiring human involvement. As preventive measures, protection has been sought from additional technical barriers and training effort. The rarity of serious incidents is a challenge in demonstrating success, but also emphasizes the importance of using leading (not only lagging) safety performance indicators for measurable safety promotion. In contrast, suitable leading performance indicators of the fire risk have been suggested for deliveries as an index of coal properties and for storage (gas emissions and temperature

Data Storage and Management for Global Research Data Infrastructures - Status and Perspectives

Directory of Open Access Journals (Sweden)

Erwin Laure

2013-07-01

Full Text Available In the vision of Global Research Data Infrastructures (GRDIs, data storage and management plays a crucial role. A successful GRDI will require a common globally interoperable distributed data system, formed out of data centres, that incorporates emerging technologies and new scientific data activities. The main challenge is to define common certification and auditing frameworks that will allow storage providers and data communities to build a viable partnership based on trust. To achieve this, it is necessary to find a long-term commitment model that will give financial, legal, and organisational guarantees of digital information preservation. In this article we discuss the state of the art in data storage and management for GRDIs and point out future research directions that need to be tackled to implement GRDIs.

State of emergency preparedness for US health insurance plans.

Science.gov (United States)

Merchant, Raina M; Finne, Kristen; Lardy, Barbara; Veselovskiy, German; Korba, Caey; Margolis, Gregg S; Lurie, Nicole

2015-01-01

Health insurance plans serve a critical role in public health emergencies, yet little has been published about their collective emergency preparedness practices and policies. We evaluated, on a national scale, the state of health insurance plans' emergency preparedness and policies. A survey of health insurance plans. We queried members of America's Health Insurance Plans, the national trade association representing the health insurance industry, about issues related to emergency preparedness issues: infrastructure, adaptability, connectedness, and best practices. Of 137 health insurance plans queried, 63% responded, representing 190.6 million members and 81% of US plan enrollment. All respondents had emergency plans for business continuity, and most (85%) had infrastructure for emergency teams. Some health plans also have established benchmarks for preparedness (eg, response time). Regarding adaptability, 85% had protocols to extend claim filing time and 71% could temporarily suspend prior medical authorization rules. Regarding connectedness, many plans shared their contingency plans with health officials, but often cited challenges in identifying regulatory agency contacts. Some health insurance plans had specific policies for assisting individuals dependent on durable medical equipment or home healthcare. Many plans (60%) expressed interest in sharing best practices. Health insurance plans are prioritizing emergency preparedness. We identified 6 policy modifications that health insurance plans could undertake to potentially improve healthcare system preparedness: establishing metrics and benchmarks for emergency preparedness; identifying disaster-specific policy modifications, enhancing stakeholder connectedness, considering digital strategies to enhance communication, improving support and access for special-needs individuals, and developing regular forums for knowledge exchange about emergency preparedness.

Developing new transportable storage casks for interim dry storage

International Nuclear Information System (INIS)

Hayashi, K.; Iwasa, K.; Araki, K.; Asano, R.

2004-01-01

Transportable storage metal casks are to be consistently used during transport and storage for AFR interim dry storage facilities planning in Japan. The casks are required to comply with the technical standards of regulations for both transport (hereinafter called ''transport regulation'') and storage (hereafter called ''storage regulation'') to maintain safety functions (heat transfer, containment, shielding and sub-critical control). In addition to these requirements, it is not planned in normal state to change the seal materials during storage at the storage facility, therefore it is requested to use same seal materials when the casks are transported after storage period. The dry transportable storage metal casks that satisfy the requirements have been developed to meet the needs of the dry storage facilities. The basic policy of this development is to utilize proven technology achieved from our design and fabrication experience, to carry out necessary verification for new designs and to realize a safe and rational design with higher capacity and efficient fabrication

State-of-Charge Balance Using Adaptive Droop Control for Distributed Energy Storage Systems in DC MicroGrid Applications

DEFF Research Database (Denmark)

Lu, Xiaonan; Sun, Kai; Guerrero, Josep M.

2014-01-01

This paper presents the coordinated control of distributed energy storage systems (DESSs) in DC micro-grids. In order to balance the state-of-charge (SoC) of each energy storage unit (ESU), an SoC-based adaptive droop control method is proposed. In this decentralized control method, the droop...

The quiet revolution in agri-food value chains in Asia: Understanding the fast emergence of cold storages in poor districts in India

OpenAIRE

Minten, Bart; Reardon, Thomas; Singh, K.M.; Sutradhar, Rajib

2012-01-01

In disadvantaged districts of Bihar, one of the poorest states in India and an area where smallholders dominate, we find that there have been dramatic increases and rapid up-scaling of modern cold storages, triggered by market reform, investment subsidies, and better overall public service provision and governance. Almost all potato farmers, small and large, participate in these cold storages. The availability of cold storages has seemingly led to improved efficiency in value chains because o...

Energy Storage Systems

Science.gov (United States)

Elliott, David

2017-07-01

As renewable energy use expands there will be a need to develop ways to balance its variability. Storage is one of the options. Presently the main emphasis is for systems storing electrical power in advanced batteries (many of them derivatives of parallel developments in the electric vehicle field), as well as via liquid air storage, compressed air storage, super-capacitors and flywheels, and, the leader so far, pumped hydro reservoirs. In addition, new systems are emerging for hydrogen generation and storage, feeding fuel cell power production. Heat (and cold) is also a storage medium and some systems exploit thermal effects as part of wider energy management activity. Some of the more exotic ones even try to use gravity on a large scale. This short book looks at all the options, their potentials and their limits. There are no clear winners, with some being suited to short-term balancing and others to longer-term storage. The eventual mix adopted will be shaped by the pattern of development of other balancing measures, including smart-grid demand management and super-grid imports and exports.

Combined Solid State and High Pressure Hydrogen Storage

DEFF Research Database (Denmark)

Grube, Elisabeth; Jensen, Torben René

Presented at The First European Early Stage Researcher's Conference on Hydrogen Storage in Belgrade, Serbia.......Presented at The First European Early Stage Researcher's Conference on Hydrogen Storage in Belgrade, Serbia....

Real-Time Transmission and Storage of Video, Audio, and Health Data in Emergency and Home Care Situations

Directory of Open Access Journals (Sweden)

Riccardo Stagnaro

2007-01-01

Full Text Available The increase in the availability of bandwidth for wireless links, network integration, and the computational power on fixed and mobile platforms at affordable costs allows nowadays for the handling of audio and video data, their quality making them suitable for medical application. These information streams can support both continuous monitoring and emergency situations. According to this scenario, the authors have developed and implemented the mobile communication system which is described in this paper. The system is based on ITU-T H.323 multimedia terminal recommendation, suitable for real-time data/video/audio and telemedical applications. The audio and video codecs, respectively, H.264 and G723.1, were implemented and optimized in order to obtain high performance on the system target processors. Offline media streaming storage and retrieval functionalities were supported by integrating a relational database in the hospital central system. The system is based on low-cost consumer technologies such as general packet radio service (GPRS and wireless local area network (WLAN or WiFi for lowband data/video transmission. Implementation and testing were carried out for medical emergency and telemedicine application. In this paper, the emergency case study is described.

From Drought to Recovery: a GRACE-Based Assessment of Groundwater Storage Variations in California

Science.gov (United States)

McEvoy, A.; Famiglietti, J. S.; Liu, P. W.; Reager, J. T., II

2017-12-01

The 2011-2015 drought in California was the most severe on record and significantly depleted state water reserves. However, after the consecutive wet winters of 2015-16 and 2016-17, water storage in reservoirs, soil, snowpack, and aquifers began recovering and the state government lifted the drought emergency for all California counties except four. But is the drought really "over"? Quantifiable metrics of groundwater storage are necessary to provide such evidence, yet in situ measurements are sparse at best. Here we holistically test whether California state water resources have fully recovered in the Sacramento, San Joaquin, and Tulare Lake basins of California, using remote sensing satellite observations, in situ measurements, and numerical models. Specifically, we partition water storage into four components of the terrestrial water cycle: soil moisture, snow water equivalent, surface water, and groundwater. We derive soil moisture and snow water equivalent from the North American Land Data Assimilation System (NLDAS) and we use the California Data Exchange Center (CDEC) network to measure in situ reservoir storage. To estimate changes in groundwater storage, we subtract these three components from the total water storage derived from the Gravity Recovery and Climate Experiment (GRACE) satellite. Preliminary results show that the groundwater storage plummeted to a record low during the 2011-2015 drought. The results also show a rapid recovery in total water storage from 2015-2017. Moreover, we find that groundwater accounts for, on average, 60% of the total water storage variations in the study basins. Our results hold social significance when placed in the context of arid California: Did the groundwater recover? Is this the largest recovery that California can expect? Finally, our results have implications for the utility of remote sensing to inform water resource management decisions.

Emerging Powers and Effective Governance in Fragile States | IDRC ...

International Development Research Centre (IDRC) Digital Library (Canada)

New and emerging development organizations are providing assistance to countries experiencing tensions and challenges after periods of conflict. This research will test whether their development assistance approaches are more effective at addressing the political and social realities of fragile states than those used by ...

Scattering-layer-induced energy storage function in polymer-based quasi-solid-state dye-sensitized solar cells.

Science.gov (United States)

Zhang, Xi; Jiang, Hongrui

2015-03-09

Photo-self-charging cells (PSCs) are compact devices with dual functions of photoelectric conversion and energy storage. By introducing a scattering layer in polymer-based quasi-solid-state dye-sensitized solar cells, two-electrode PSCs with highly compact structure were obtained. The charge storage function stems from the formed ion channel network in the scattering layer/polymer electrolyte system. Both the photoelectric conversion and the energy storage functions are integrated in only the photoelectrode of such PSCs. This design of PSC could continuously output power as a solar cell with considerable efficiency after being photo-charged. Such PSCs could be applied in highly-compact mini power devices.

Emergency distress call system for automobiles in Lagos state, Nigeria

African Journals Online (AJOL)

Emergency distress call system for automobiles in Lagos state, Nigeria. ... PROMOTING ACCESS TO AFRICAN RESEARCH ... and communications technology capabilities to transportation and the medical care system in order to save lives, ...

Effect of the Affordable Care Act Medicaid Expansion on Emergency Department Visits: Evidence From State-Level Emergency Department Databases.

Science.gov (United States)

Nikpay, Sayeh; Freedman, Seth; Levy, Helen; Buchmueller, Tom

2017-08-01

We assess whether the expansion of Medicaid under the Patient Protection and Affordable Care Act (ACA) results in changes in emergency department (ED) visits or ED payer mix. We also test whether the size of the change in ED visits depends on the change in the size of the Medicaid population. Using all-capture, longitudinal, state data from the Agency for Healthcare Research and Quality's Fast Stats program, we implemented a difference-in-difference analysis, which compared changes in ED visits per capita and the share of ED visits by payer (Medicaid, uninsured, and private insurance) in 14 states that did and 11 states that did not expand Medicaid in 2014. Analyses controlled for state-level demographic and economic characteristics. We found that total ED use per 1,000 population increased by 2.5 visits more in Medicaid expansion states than in nonexpansion states after 2014 (95% confidence interval [CI] 1.1 to 3.9). Among the visit types that could be measured, increases in ED visits were largest for injury-related visits and for states with the largest changes in Medicaid enrollment. Compared with nonexpansion states, in expansion states the share of ED visits covered by Medicaid increased 8.8 percentage points (95% CI 5.0 to 12.6), whereas the uninsured share decreased by 5.3 percentage points (95% CI -1.7 to -8.9). The ACA's Medicaid expansion has resulted in changes in payer mix. Contrary to other studies of the ACA's effect on ED visits, our study found that the expansion also increased use of the ED, consistent with polls of emergency physicians. Copyright © 2017 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

Materials behavior in interim storage of spent fuel

International Nuclear Information System (INIS)

Johnson, A.B. Jr.; Bailey, W.J.; Gilbert, E.R.; Inman, S.C.

1982-01-01

Interim storage has emerged as the only current spent-fuel management method in the US and is essential in all countries with nuclear reactors. Materials behavior is a key aspect in licensing interim-storage facilities for several decades of spent-fuel storage. This paper reviews materials behavior in wet storage, which is licensed for light-water reactor (LWR) fuel, and dry storage, for which a licensing position for LWR fuel is developing

Optimizing MEMS-Based Storage Devices for Mobile Battery-Powered Systems

NARCIS (Netherlands)

Khatib, M.G.; Hartel, Pieter H.

An emerging storage technology, called MEMS-based storage, promises nonvolatile storage devices with ultrahigh density, high rigidity, a small form factor, and low cost. For these reasons, MEMS-based storage devices are suitable for battery-powered mobile systems such as PDAs. For deployment in such

Frequency of unsafe storage, use, and disposal practices of opioids among cancer patients presenting to the emergency department.

Science.gov (United States)

Silvestre, Julio; Reddy, Akhila; de la Cruz, Maxine; Wu, Jimin; Liu, Diane; Bruera, Eduardo; Todd, Knox H

2017-12-01

Approximately 75% of prescription opioid abusers obtain the drug from an acquaintance, which may be a consequence of improper opioid storage, use, disposal, and lack of patient education. We aimed to determine the opioid storage, use, and disposal patterns in patients presenting to the emergency department (ED) of a comprehensive cancer center. We surveyed 113 patients receiving opioids for at least 2 months upon presenting to the ED and collected information regarding opioid use, storage, and disposal. Unsafe storage was defined as storing opioids in plain sight, and unsafe use was defined as sharing or losing opioids. The median age was 53 years, 55% were female, 64% were white, and 86% had advanced cancer. Of those surveyed, 36% stored opioids in plain sight, 53% kept them hidden but unlocked, and only 15% locked their opioids. However, 73% agreed that they would use a lockbox if given one. Patients who reported that others had asked them for their pain medications (p = 0.004) and those who would use a lockbox if given one (p = 0.019) were more likely to keep them locked. Some 13 patients (12%) used opioids unsafely by either sharing (5%) or losing (8%) them. Patients who reported being prescribed more pain pills than required (p = 0.032) were more likely to practice unsafe use. Most (78%) were unaware of proper opioid disposal methods, 6% believed they were prescribed more medication than required, and 67% had unused opioids at home. Only 13% previously received education about safe disposal of opioids. Overall, 77% (87) of patients reported unsafe storage, unsafe use, or possessed unused opioids at home. Many cancer patients presenting to the ED improperly and unsafely store, use, or dispose of opioids, thus highlighting a need to investigate the impact of patient education on such practices.

Emergence of Leviathan : Monopolization of Violence in a Post-Colonial State

OpenAIRE

Jonson N., Porteux

2018-01-01

This article investigates the post-war state building experience of South Korea, with a focus on state-non-state cooperation as a process of the consolidation of power under a single coercive entity. While often presented as an outlier case in terms of state emergence, the evidence suggests that the case of South Korea fits within the broader empirical patterns and experiences of Western polities, which in turn adds robustness to existing theory. Namely, state seekers collaborated with non-st...

46 CFR 112.55-15 - Capacity of storage batteries.

Science.gov (United States)

2010-10-01

... 46 Shipping 4 2010-10-01 2010-10-01 false Capacity of storage batteries. 112.55-15 Section 112.55... LIGHTING AND POWER SYSTEMS Storage Battery Installation § 112.55-15 Capacity of storage batteries. (a) A storage battery for an emergency lighting and power system must have the capacity— (1) To close all...

Underground storage tanks: State regulations and compliance strategies

International Nuclear Information System (INIS)

Robinson, J.E.

1988-01-01

In an effort to resolve underground storage tank (UST) management problems, several states and localities have moved ahead of EPA in the promulgation of UST regulations. Developed independently, these regulations represent different strategies for ensuring compliance: from an extensive set of permitting requirements that allow for the implementation of site-specific control measures to a uniform set of technical and operational requirements that vary according to installation date. For the tank owner, complying with these regulations can be a time-consuming and frustrating endeavor. However, during the course of several environmental audits of similar facilities in different states, useful strategies were observed or developed that enabled facilities to respond more effectively to requirements: these included computerization of files, designation of tank custodians, installation of low-maintenance equipment, and increased use of above-ground tanks. Of special additional interest was the wide variation in costs for similar tank services quoted by both private and government sources. These strategies are coupled with general observations on the efficacy of the various regulatory approaches to provide a field view that may be useful to tank owners and others involved in underground tank management and evaluation

Grid scale energy storage in salt caverns

Energy Technology Data Exchange (ETDEWEB)

Crotogino, F.; Donadei, S.

2011-05-15

Fossil energy sources require some 20% of the annual consumption to be stored to secure emergency cover, cold winter supply, peak shaving, seasonal swing, load management and energy trading. Today the electric power industry benefits from the extreme high energy density of fossil and nuclear fuels. This is one important reason why e.g. the German utilities are able to provide highly reliable grid operation at a electric power storage capacity at their pumped hydro power stations of less then 1 hour (40 GWh) related to the total load in the grid - i.e. only 0,06% compared to 20% for natural gas. Along with the changeover to renewable wind-and to a lesser extent PV-based electricity production this 'outsourcing' of storage services to fossil and nuclear fuels will decline. One important way out will be grid scale energy storage in geological formations. The present discussion, research projects and plans for balancing short term wind and solar power fluctuations focus primarily on the installation of Compressed Air Energy Storages (CAES) if the capacity of existing pumped hydro plants cannot be expanded, e.g. because of environmental issues or lack of suitable topography. Because of their small energy density, these storage options are, however, generally less suitable for balancing for longer term fluctuations in case of larger amounts of excess wind power, wind flaws or even seasonal fluctuations. One important way out are large underground hydrogen storages which provide a much higher energy density because of chemical energy bond. Underground hydrogen storage is state of the art since many years in Great Britain and in the USA for the (petro-) chemical industry. (Author)

PUREX Storage Tunnels dangerous waste permit application

International Nuclear Information System (INIS)

1991-12-01

This report is part of a dangerous waste permit application for the storage of wastes from the Purex process at Hanford. Appendices are presented on the following: construction drawings; HSW-5638, specifications for disposal facility for failed equipment, Project CA-1513-A; HWS-8262, specification for Purex equipment disposal, Project CGC 964; storage tunnel checklist; classification of residual tank heels in Purex storage tunnels; emergency plan for Purex facility; training course descriptions; and the Purex storage tunnels engineering study

The state of emergency care in the Republic of the Sudan

Directory of Open Access Journals (Sweden)

Nada Hassan A. A-Rahman

2014-06-01

Full Text Available Sudan is one of the largest African countries, covering an area of 1.9 million km2—approximately one fifth of the geographic area of the United States. The population is 30 million people, the majority of whom (68% live in rural areas, as compared with the sub-Saharan African average of approximately 62%. Sudan is considered a lower-middle income country—with 47% of the population living below the poverty line and a gross domestic product (GDP of US $62 billion in 2010. In addition to excessive burden of communicable diseases such as malaria, tuberculosis, and schistosomiasis, Sudan is particularly susceptible to both natural and manmade disasters. Drought and flood are quite common due to Sudan’s proximity to and dependency on the Nile, and throughout history Sudan has also been plagued with internal conflicts and outbreaks of violence, which bring about a burden of traumatic disease and demand high quality emergency care. The purpose of this paper is to describe the state of emergency care and Emergency Medicine education, and their context within the Sudanese health care system. As is the case in most African countries, emergency care is delivered by junior staff: new graduates from medical schools and unsupervised medical officers who handle all types of case presentations. In 2001, increased mortality and morbidity among unsorted patients prompted the Ministry of Health to introduce a new triage-based emergency care system. In late 2005, twenty-one Emergency physicians delivered these new Emergency Services. In 2011, following a curriculum workshop in November 2010, the Emergency Medicine residency program was started in Khartoum. Currently there are 27 rotating registrars, the first class of whom is expected to graduate in 2015.

Developing new transportable storage casks for interim dry storage

Energy Technology Data Exchange (ETDEWEB)

Hayashi, K.; Iwasa, K.; Araki, K.; Asano, R. [Hitachi Zosen Diesel and Engineering Co., Ltd., Tokyo (Japan)

2004-07-01

Transportable storage metal casks are to be consistently used during transport and storage for AFR interim dry storage facilities planning in Japan. The casks are required to comply with the technical standards of regulations for both transport (hereinafter called ''transport regulation'') and storage (hereafter called ''storage regulation'') to maintain safety functions (heat transfer, containment, shielding and sub-critical control). In addition to these requirements, it is not planned in normal state to change the seal materials during storage at the storage facility, therefore it is requested to use same seal materials when the casks are transported after storage period. The dry transportable storage metal casks that satisfy the requirements have been developed to meet the needs of the dry storage facilities. The basic policy of this development is to utilize proven technology achieved from our design and fabrication experience, to carry out necessary verification for new designs and to realize a safe and rational design with higher capacity and efficient fabrication.

77 FR 35061 - Announcement Regarding States Triggering “Off” in the Emergency Unemployment Compensation 2008...

Science.gov (United States)

2012-06-12

... Triggering ``Off'' in the Emergency Unemployment Compensation 2008 Program and the Federal-State Extended...: Announcement regarding states triggering ``off'' in the Emergency Unemployment Compensation 2008 (EUC08... average, seasonally adjusted total unemployment rate in Connecticut fell below the 8.0% rate required to...

77 FR 21811 - Announcement Regarding States Triggering “Off” in the Emergency Unemployment Compensation 2008...

Science.gov (United States)

2012-04-11

... Triggering ``Off'' in the Emergency Unemployment Compensation 2008 (EUC08) Program and the Federal-State.... SUMMARY: Announcement regarding states triggering ``off'' in the Emergency Unemployment Compensation 2008... average, seasonally-adjusted total unemployment rate (TUR trigger) for Texas fell below the 8.5% threshold...

Radioactive solid waste inventories at United States Department of Energy burial and storage sites

International Nuclear Information System (INIS)

Watanabe, T.

1987-06-01

Radioactive solid waste inventories are given for United States Department of Energy (DOE) burial and storage sites. These data are obtained from the Solid Waste Information Management System (SWIMS) and reflect the inventories as of the end of the calendar year 1986. 4 figs., 7 tabs

Spent-fuel-storage alternatives

International Nuclear Information System (INIS)

1980-01-01

The Spent Fuel Storage Alternatives meeting was a technical forum in which 37 experts from 12 states discussed storage alternatives that are available or are under development. The subject matter was divided into the following five areas: techniques for increasing fuel storage density; dry storage of spent fuel; fuel characterization and conditioning; fuel storage operating experience; and storage and transport economics. Nineteen of the 21 papers which were presented at this meeting are included in this Proceedings. These have been abstracted and indexed

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme, Training Materials

International Nuclear Information System (INIS)

2013-01-01

The aim of these training materials is to provide a practical tool for emergency planning for a State embarking on a nuclear power programme, and to fulfil, in part, functions assigned to the IAEA under the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (the Assistance Convention). Under Article 5.a(ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to States Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. One of the concerns associated with nuclear power is the possibility that a State embarking on a nuclear power programme might not have sufficient capabilities and therefore would not be adequately prepared to respond to a radiation emergency caused by severe accident conditions. Protecting the public, the environment and property in the event of a failure of any level of defence in depth is the most important safety objective. A robust framework for emergency preparedness and response to a radiation emergency forms the last level of defence in depth and, as such, must be developed and implemented by any State embarking on a nuclear power programme, using best international practices. The establishment of capabilities and arrangements for emergency preparedness and response to severe accident conditions is one of the principal tasks in the development of a national infrastructure for nuclear power. State of the art emergency preparedness and response is a key element in achieving overall plant safety. This training course complements the IAEA publication 'Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme' (EPR-Embarking 2012). These materials are designed to help States apply the guidance in EPR-Embarking 2012, in order to develop the capability to adequately prepare for and respond to a radiation emergency after the commissioning and start of

Method of storing the fuel storage pot in a fuel storage tank for away-from-reactor-storage

International Nuclear Information System (INIS)

Ishiguro, Jun-ichi.

1980-01-01

Purpose: To prevent the contact of sodium in the away-from-reactor-storage fuel storage tank with sodium in a fuel storage pool having radioactivity ana always retain clean state therein. Method: Sodium is filled in a container body of the away-from-reactor-storage fuel storage tank, and a conduit, a cycling pump, and cooling means are disposed to form a sodium coolant cycling loop. The fuel storage pool is so stored in the container body that the heat of the pool is projected from the liquid surface of the sodium in the container. Therefore, the sodium in the container is isolated from the sodium in the pool containing strong radioactivity to prevent contact of the former sodium from the latter sodium. (Sekiya, K.)

Spent-fuel-storage alternatives

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The Spent Fuel Storage Alternatives meeting was a technical forum in which 37 experts from 12 states discussed storage alternatives that are available or are under development. The subject matter was divided into the following five areas: techniques for increasing fuel storage density; dry storage of spent fuel; fuel characterization and conditioning; fuel storage operating experience; and storage and transport economics. Nineteen of the 21 papers which were presented at this meeting are included in this Proceedings. These have been abstracted and indexed. (ATT)

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme (Arabic Edition)

International Nuclear Information System (INIS)

2014-01-01

The aim of this publication is to provide a practical tool for emergency planning for States embarking on a nuclear power programme and to fulfil, in part, functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency ('Assistance Convention'). Under Article 5.a (ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to State Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. As established in the publication Preparedness and Response for a Nuclear or Radiological Emergency (IAEA Safety Standards Series No. GS-R-2), the practical goal of emergency response is 'to ensure that arrangements are in place for a timely, managed, controlled, coordinated and effective response at the scene, and at the local, regional, national and international level, to any nuclear or radiological emergency'. In 2011 the IAEA General Conference, in resolution GC(55)/RES/9, encouraged States 'embarking on new nuclear power programmes to take timely and proactive steps, based upon gradual and systematic application of IAEA safety standards, to establish and sustain a strong safety culture'. It also 'emphasizes the importance for all Member States to implement emergency preparedness and response mechanisms and develop mitigation measures at a national level, consistent with the IAEA's Safety Standards, for improving emergency preparedness and response, facilitating communication in an emergency and contributing to harmonization of national criteria for protective and other actions'. This publication, issued in the IAEA Emergency Preparedness and Response Series, is intended to assist on steps to be taken by States embarking on a nuclear power programme to establish effective national capabilities and arrangements of preparedness for and response to a nuclear or radiological emergency (hereinafter referred to as

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme (Russian Edition)

International Nuclear Information System (INIS)

2013-01-01

The aim of this publication is to provide a practical tool for emergency planning for States embarking on a nuclear power programme and to fulfil, in part, functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency ('Assistance Convention'). Under Article 5.a (ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to State Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. As established in the publication Preparedness and Response for a Nuclear or Radiological Emergency (IAEA Safety Standards Series No. GS-R-2), the practical goal of emergency response is 'to ensure that arrangements are in place for a timely, managed, controlled, coordinated and effective response at the scene, and at the local, regional, national and international level, to any nuclear or radiological emergency'. In 2011 the IAEA General Conference, in resolution GC(55)/RES/9, encouraged States 'embarking on new nuclear power programmes to take timely and proactive steps, based upon gradual and systematic application of IAEA safety standards, to establish and sustain a strong safety culture'. It also 'emphasizes the importance for all Member States to implement emergency preparedness and response mechanisms and develop mitigation measures at a national level, consistent with the IAEA's Safety Standards, for improving emergency preparedness and response, facilitating communication in an emergency and contributing to harmonization of national criteria for protective and other actions'. This publication, issued in the IAEA Emergency Preparedness and Response Series, is intended to assist on steps to be taken by States embarking on a nuclear power programme to establish effective national capabilities and arrangements of preparedness for and response to a nuclear or radiological emergency (hereinafter referred to as

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme (Spanish Edition)

International Nuclear Information System (INIS)

2014-01-01

The aim of this publication is to provide a practical tool for emergency planning for States embarking on a nuclear power programme and to fulfil, in part, functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency ('Assistance Convention'). Under Article 5.a (ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to State Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. As established in the publication Preparedness and Response for a Nuclear or Radiological Emergency (IAEA Safety Standards Series No. GS-R-2), the practical goal of emergency response is 'to ensure that arrangements are in place for a timely, managed, controlled, coordinated and effective response at the scene, and at the local, regional, national and international level, to any nuclear or radiological emergency'. In 2011 the IAEA General Conference, in resolution GC(55)/RES/9, encouraged States 'embarking on new nuclear power programmes to take timely and proactive steps, based upon gradual and systematic application of IAEA safety standards, to establish and sustain a strong safety culture'. It also 'emphasizes the importance for all Member States to implement emergency preparedness and response mechanisms and develop mitigation measures at a national level, consistent with the IAEA's Safety Standards, for improving emergency preparedness and response, facilitating communication in an emergency and contributing to harmonization of national criteria for protective and other actions'. This publication, issued in the IAEA Emergency Preparedness and Response Series, is intended to assist on steps to be taken by States embarking on a nuclear power programme to establish effective national capabilities and arrangements of preparedness for and response to a nuclear or radiological emergency (hereinafter referred to as

Opportunities for electricity storage in deregulating markets

International Nuclear Information System (INIS)

Graves, F.; Jenkin, T.; Murphy, D.

1999-01-01

This article addresses the value of electricity storage and its ability to take advantage of emerging energy arbitrage opportunities: buying power when it is inexpensive, and reselling it at a higher price. The focus of this article is on electricity markets and the opportunities they present for a merchant storage device, rather than on storage technologies themselves. There are a number of existing and emerging storage technologies: pumped hydro, various batteries, compressed air energy storage (CAES), superconducting magnetic energy storage (SMES), flywheels--even conventional hydro has storage-like properties. However, all these technologies operated on the same basic principle of exploiting short-term differentials in electricity prices: buy low, sell high (a strategy that is actually meaningful in electricity markets, unlike in financial markets). The object of this article is to develop and demonstrate a means for assessing the potential value of storage in different electricity markets, rather than to attempt to assess the prospects of a particular technology. The approach taken here is to look at price data from a number of actual electricity markets to determine what opportunities they might offer to a generic storage device. A storage technology is described here by its basic performance parameters--charge and generate capacity, energy inventory limits, and efficiency--which are sufficient to assess the basic economic potential of storage in a given market. The authors look primarily at US markets, but also compare and contrast findings with the situation in foreign markets in the U.K., Norway, Canada, and Australia, and discuss how market structure can influence the value of storage. Moreover, the authors use empirically observed relationships between hourly and 5 x 16 blocked prices to infer a rule for adjusting the value of storage assets in regions where only blocked price information is available

77 FR 35062 - Announcement Regarding States Triggering “Off” in the Emergency Unemployment Compensation 2008...

Science.gov (United States)

2012-06-12

... Triggering ``Off'' in the Emergency Unemployment Compensation 2008 Program and the Federal-State Extended...: Announcement regarding states triggering ``off'' in the Emergency Unemployment Compensation 2008 (EUC08... unemployment rate be at least 110% of one of the rates from a comparable period in one of the three prior years...

Statistical Analysis of Terrestrial Water Storage Change Over Southwestern United States

Science.gov (United States)

Eibedingil, I. G.; Mubako, S. T.; Hargrove, W. L.; Espino, A. C.

2017-12-01

A warming trend over recent decades has aggravated water resource challenges in the arid southwestern region of the United States (U.S.). An increase in temperature, coupled with decreasing snowpack and rainfall have impacted the region's cities, ecosystems, and agriculture. The region is the largest contributor of agricultural products to the U.S. market resulting from irrigation. Water use through irrigation is stressing already limited terrestrial water resources. Population growth in recent decades has also led to increased water demand. This study utilizes products of the Gravity Recovery and Climate Experiment (GRACE) twin satellites experiment in MATLAB and ArcGIS to examine terrestrial water storage changes in the southwestern region of the U.S., comprised of the eight states of Texas, California, Nevada, Utah, Arizona, Colorado, New Mexico, and Oklahoma. Linear trend analysis was applied to the equivalent water-height data of terrestrial water storage changes (TWSC), precipitation, and air temperature. Correlation analysis was performed on couplings of TWSC - precipitation and TWSC - air temperature to examine the impact of temperature and precipitation on the region's water resources. Our preliminary results show a decreasing trend of TWSC from April 2002 to July 2016 in almost all parts of the region. Precipitation shows a decreasing trend from March 2000 to March 2017 for most of the region, except for sparse areas of increased precipitation near the northwestern coast of California, and a belt running from Oklahoma through the middle of Texas to the El Paso/New Mexico border. From April 2002 to December 2014, air temperature exhibited a negative trend for most of the region, except a larger part of California and a small location in central Texas. Correlation between TWSC and precipitation was mostly positive, but a negative trend was observed when TWSC and air temperature were correlated. The study contributes to the understanding of terrestrial water

The Impacts of State Ownership on Information Asymmetry: Evidence from an Emerging Market

Directory of Open Access Journals (Sweden)

Jongmoo Jay Choi

2010-06-01

Full Text Available This study examines the effect of corporate ownership on information asymmetry as measured by bid-ask spread in the emerging markets of China. Government ownership has significant and positive impacts on bid-ask spread during the period 1995–2000, but disappears afterward during 2001–2003. The finding that state ownership raised bid-ask spread in the early period is consistent with recent studies on emerging markets including China, which indicate that firms with higher state ownership tend to have a greater deviation between cash flow rights and control rights (eg, Wei et al., 2005. This implies that lower state ownership is associated with lower information asymmetry in the market, an economic consequence of significant economic reform and privatization regarding the market microstructure. However, with more active control transfers and emergence of private controlling shareholders, regulatory changes in ownership structure and corporate governance mechanisms, and thus an improved legal and institutional environment, the link between the government ownership and information asymmetry turns to be insignificant in the later period. These results have important implications for transparency and information disclosure policies as well as privatization in emerging markets.

CALCULATING ENERGY STORAGE DUE TO TOPOLOGICAL CHANGES IN EMERGING ACTIVE REGION NOAA AR 11112

International Nuclear Information System (INIS)

Tarr, Lucas; Longcope, Dana

2012-01-01

The minimum current corona model provides a way to estimate stored coronal energy using the number of field lines connecting regions of positive and negative photospheric flux. This information is quantified by the net flux connecting pairs of opposing regions in a connectivity matrix. Changes in the coronal magnetic field, due to processes such as magnetic reconnection, manifest themselves as changes in the connectivity matrix. However, the connectivity matrix will also change when flux sources emerge or submerge through the photosphere, as often happens in active regions. We have developed an algorithm to estimate the changes in flux due to emergence and submergence of magnetic flux sources. These estimated changes must be accounted for in order to quantify storage and release of magnetic energy in the corona. To perform this calculation over extended periods of time, we must additionally have a consistently labeled connectivity matrix over the entire observational time span. We have therefore developed an automated tracking algorithm to generate a consistent connectivity matrix as the photospheric source regions evolve over time. We have applied this method to NOAA Active Region 11112, which underwent a GOES M2.9 class flare around 19:00 on 2010 October 16th, and calculated a lower bound on the free magnetic energy buildup of ∼8.25 × 10 30 erg over 3 days.

A new storage-ring light source

Energy Technology Data Exchange (ETDEWEB)

Chao, Alex [SLAC National Accelerator Lab., Menlo Park, CA (United States)

2015-06-01

A recently proposed technique in storage ring accelerators is applied to provide potential high-power sources of photon radiation. The technique is based on the steady-state microbunching (SSMB) mechanism. As examples of this application, one may consider a high-power DUV photon source for research in atomic and molecular physics or a high-power EUV radiation source for industrial lithography. A less challenging proof-of-principle test to produce IR radiation using an existing storage ring is also considered.

41 CFR 302-9.10 - For what POV emergency storage expenses will my agency pay?

Science.gov (United States)

2010-07-01

... Federal Travel Regulation System RELOCATION ALLOWANCES TRANSPORTATION AND STORAGE OF PROPERTY 9-ALLOWANCES... expenses, including but not limited to readying the POV for storage, transportation to point of storage, storage, readying the POV for use after storage, and transportation from the point of storage. Insurance...

Economic Aspects of Innovations in Energy Storage

OpenAIRE

Strielkowski, Wadim; Lisin, Evgeny

2017-01-01

Energy storage is emerging as a potential method for addressing global energy system challenges across many different application areas. However, there are technical and non-technical barriers to the widespread deployment of energy storage devices. With regard to the above, it seems crucial to identify innovation processes, mechanisms and systems (in a broad sense) that can allow energy storage to help meet energy system challenges, and also deliver industrial growth from technology developme...

Radioactive waste storage issues

International Nuclear Information System (INIS)

Kunz, D.E.

1994-01-01

In the United States we generate greater than 500 million tons of toxic waste per year which pose a threat to human health and the environment. Some of the most toxic of these wastes are those that are radioactively contaminated. This thesis explores the need for permanent disposal facilities to isolate radioactive waste materials that are being stored temporarily, and therefore potentially unsafely, at generating facilities. Because of current controversies involving the interstate transfer of toxic waste, more states are restricting the flow of wastes into - their borders with the resultant outcome of requiring the management (storage and disposal) of wastes generated solely within a state's boundary to remain there. The purpose of this project is to study nuclear waste storage issues and public perceptions of this important matter. Temporary storage at generating facilities is a cause for safety concerns and underscores, the need for the opening of permanent disposal sites. Political controversies and public concern are forcing states to look within their own borders to find solutions to this difficult problem. Permanent disposal or retrievable storage for radioactive waste may become a necessity in the near future in Colorado. Suitable areas that could support - a nuclear storage/disposal site need to be explored to make certain the health, safety and environment of our citizens now, and that of future generations, will be protected

Emergence of advance waves in a steady-state universe

Energy Technology Data Exchange (ETDEWEB)

Hobart, R.H.

1979-10-01

In standard Wheeler-Feynman electrodynamics advanced waves from any source are absolutely canceled by the advanced waves from the absorber responding to that source. The present work shows this cancellation fails over cosmic distances in a steady-state universe. A test of the view proposed earlier, in a paper which assumed failure of cancellation ad hoc, that zero-point fluctuations of the electromagnetic field are such emergent advanced waves, is posed. The view entails anomalous slowing of spontaneous transition rates at longer emission wavelengths; available data go against this, furnishing additional argument against the suspect assumption that the universe is steady-state.

Emergence of advance waves in a steady-state universe

International Nuclear Information System (INIS)

Hobart, R.H.

1979-01-01

In standard Wheeler-Feynman electrodynamics advanced waves from any source are absolutely canceled by the advanced waves from the absorber responding to that source. The present work shows this cancellation fails over cosmic distances in a steady-state universe. A test of the view proposed earlier, in a paper which assumed failure of cancellation ad hoc, that zero-point fluctuations of the electromagnetic field are such emergent advanced waves, is posed. The view entails anomalous slowing of spontaneous transition rates at longer emission wavelengths; available data go against this, furnishing additional argument against the suspect assumption that the universe is steady-state

Interim storage of radioactive waste packages

International Nuclear Information System (INIS)

1998-01-01

This report covers all the principal aspects of production and interim storage of radioactive waste packages. The latest design solutions of waste storage facilities and the operational experiences of developed countries are described and evaluated in order to assist developing Member States in decision making and design and construction of their own storage facilities. This report is applicable to any category of radioactive waste package prepared for interim storage, including conditioned spent fuel, high level waste and sealed radiation sources. This report addresses the following issues: safety principles and requirements for storage of waste packages; treatment and conditioning methods for the main categories of radioactive waste; examples of existing interim storage facilities for LILW, spent fuel and high level waste; operational experience of Member States in waste storage operations including control of storage conditions, surveillance of waste packages and observation of the behaviour of waste packages during storage; retrieval of waste packages from storage facilities; technical and administrative measures that will ensure optimal performance of waste packages subject to various periods of interim storage

State Higher Education Funding Models: An Assessment of Current and Emerging Approaches

Science.gov (United States)

Layzell, Daniel T.

2007-01-01

This article provides an assessment of the current and emerging approaches used by state governments in allocating funding for higher education institutions and programs. It reviews a number of desired characteristics or outcomes for state higher education funding models, including equity, adequacy, stability, and flexibility. Although there is…

Low temperature thermal energy storage: a state-of-the-art survey

Energy Technology Data Exchange (ETDEWEB)

Baylin, F.

1979-07-01

The preliminary version of an analysis of activities in research, development, and demonstration of low temperature thermal energy storage (TES) technologies having applications in renewable energy systems is presented. Three major categories of thermal storage devices are considered: sensible heat; phase change materials (PCM); and reversible thermochemical reactions. Both short-term and annual thermal energy storage technologies based on prinicples of sensible heat are discussed. Storage media considered are water, earth, and rocks. Annual storage technologies include solar ponds, aquifers, and large tanks or beds of water, earth, or rocks. PCM storage devices considered employ salt hydrates and organic compounds. The sole application of reversible chemical reactions outlined is for the chemical heat pump. All program processes from basic research through commercialization efforts are investigated. Nongovernment-funded industrial programs and foreign efforts are outlined as well. Data describing low temperature TES activities are presented also as project descriptions. Projects for all these programs are grouped into seven categories: short-term sensible heat storage; annual sensible heat storage; PCM storage; heat transfer and exchange; industrial waste heat recovery and storage; reversible chemical reaction storage; and models, economic analyses, and support studies. Summary information about yearly funding and brief descriptions of project goals and accomplishments are included.

The Solar Energy Trifecta: Solar + Storage + Net Metering | State, Local,

Science.gov (United States)

and Tribal Governments | NREL The Solar Energy Trifecta: Solar + Storage + Net Metering The Solar Energy Trifecta: Solar + Storage + Net Metering February 12, 2018 by Benjamin Mow Massachusetts (DPU) seeking an advisory ruling on the eligibility of pairing solar-plus-storage systems with current

Evaluation of the Huawei UDS cloud storage system for CERN specific data

International Nuclear Information System (INIS)

Resines, M Zotes; Hughes, J; Wang, L; Heikkila, S S; Duellmann, D; Adde, G; Toebbicke, R

2014-01-01

Cloud storage is an emerging architecture aiming to provide increased scalability and access performance, compared to more traditional solutions. CERN is evaluating this promise using Huawei UDS and OpenStack SWIFT storage deployments, focusing on the needs of high-energy physics. Both deployed setups implement S3, one of the protocols that are emerging as a standard in the cloud storage market. A set of client machines is used to generate I/O load patterns to evaluate the storage system performance. The presented read and write test results indicate scalability both in metadata and data perspectives. Futher the Huawei UDS cloud storage is shown to be able to recover from a major failure of losing 16 disks. Both cloud storages are finally demonstrated to function as back-end storage systems to a filesystem, which is used to deliver high energy physics software.

Evaluation of the Huawei UDS cloud storage system for CERN specific data

Science.gov (United States)

Zotes Resines, M.; Heikkila, S. S.; Duellmann, D.; Adde, G.; Toebbicke, R.; Hughes, J.; Wang, L.

2014-06-01

Cloud storage is an emerging architecture aiming to provide increased scalability and access performance, compared to more traditional solutions. CERN is evaluating this promise using Huawei UDS and OpenStack SWIFT storage deployments, focusing on the needs of high-energy physics. Both deployed setups implement S3, one of the protocols that are emerging as a standard in the cloud storage market. A set of client machines is used to generate I/O load patterns to evaluate the storage system performance. The presented read and write test results indicate scalability both in metadata and data perspectives. Futher the Huawei UDS cloud storage is shown to be able to recover from a major failure of losing 16 disks. Both cloud storages are finally demonstrated to function as back-end storage systems to a filesystem, which is used to deliver high energy physics software.

The influence of the ocean circulation state on ocean carbon storage and CO2 drawdown potential in an Earth system model

Science.gov (United States)

Ödalen, Malin; Nycander, Jonas; Oliver, Kevin I. C.; Brodeau, Laurent; Ridgwell, Andy

2018-03-01

During the four most recent glacial cycles, atmospheric CO2 during glacial maxima has been lowered by about 90-100 ppm with respect to interglacials. There is widespread consensus that most of this carbon was partitioned in the ocean. It is, however, still debated which processes were dominant in achieving this increased carbon storage. In this paper, we use an Earth system model of intermediate complexity to explore the sensitivity of ocean carbon storage to ocean circulation state. We carry out a set of simulations in which we run the model to pre-industrial equilibrium, but in which we achieve different states of ocean circulation by changing forcing parameters such as wind stress, ocean diffusivity and atmospheric heat diffusivity. As a consequence, the ensemble members also have different ocean carbon reservoirs, global ocean average temperatures, biological pump efficiencies and conditions for air-sea CO2 disequilibrium. We analyse changes in total ocean carbon storage and separate it into contributions by the solubility pump, the biological pump and the CO2 disequilibrium component. We also relate these contributions to differences in the strength of the ocean overturning circulation. Depending on which ocean forcing parameter is tuned, the origin of the change in carbon storage is different. When wind stress or ocean diapycnal diffusivity is changed, the response of the biological pump gives the most important effect on ocean carbon storage, whereas when atmospheric heat diffusivity or ocean isopycnal diffusivity is changed, the solubility pump and the disequilibrium component are also important and sometimes dominant. Despite this complexity, we obtain a negative linear relationship between total ocean carbon and the combined strength of the northern and southern overturning cells. This relationship is robust to different reservoirs dominating the response to different forcing mechanisms. Finally, we conduct a drawdown experiment in which we investigate

The influence of the ocean circulation state on ocean carbon storage and CO2 drawdown potential in an Earth system model

Directory of Open Access Journals (Sweden)

M. Ödalen

2018-03-01

Full Text Available During the four most recent glacial cycles, atmospheric CO2 during glacial maxima has been lowered by about 90–100 ppm with respect to interglacials. There is widespread consensus that most of this carbon was partitioned in the ocean. It is, however, still debated which processes were dominant in achieving this increased carbon storage. In this paper, we use an Earth system model of intermediate complexity to explore the sensitivity of ocean carbon storage to ocean circulation state. We carry out a set of simulations in which we run the model to pre-industrial equilibrium, but in which we achieve different states of ocean circulation by changing forcing parameters such as wind stress, ocean diffusivity and atmospheric heat diffusivity. As a consequence, the ensemble members also have different ocean carbon reservoirs, global ocean average temperatures, biological pump efficiencies and conditions for air–sea CO2 disequilibrium. We analyse changes in total ocean carbon storage and separate it into contributions by the solubility pump, the biological pump and the CO2 disequilibrium component. We also relate these contributions to differences in the strength of the ocean overturning circulation. Depending on which ocean forcing parameter is tuned, the origin of the change in carbon storage is different. When wind stress or ocean diapycnal diffusivity is changed, the response of the biological pump gives the most important effect on ocean carbon storage, whereas when atmospheric heat diffusivity or ocean isopycnal diffusivity is changed, the solubility pump and the disequilibrium component are also important and sometimes dominant. Despite this complexity, we obtain a negative linear relationship between total ocean carbon and the combined strength of the northern and southern overturning cells. This relationship is robust to different reservoirs dominating the response to different forcing mechanisms. Finally, we conduct a drawdown experiment

A Comparison of Mortality Following Emergency Laparotomy Between Populations From New York State and England.

Science.gov (United States)

Tan, Benjamin H L; Mytton, Jemma; Al-Khyatt, Waleed; Aquina, Christopher T; Evison, Felicity; Fleming, Fergal J; Griffiths, Ewen; Vohra, Ravinder S

2017-08-01

The aim of this study was to compare mortality following emergency laparotomy between populations from New York State and England. Mortality following emergency surgery is a key quality improvement metric in both the United States and UK. Comparison of the all-cause 30-day mortality following emergency laparotomy between populations from New York State and England might identify factors that could improve care. Patient demographics, in-hospital, and 30-day outcomes data were extracted from Hospital Episode Statistics (HES) in England and the New York Statewide Planning and Research Cooperative System (SPARCS) administrative databases for all patients older than 18 years undergoing laparotomy for emergency open bowel surgery between April 2009 and March 2014. The primary outcome measure was all-cause mortality within 30 days of the index laparotomy. Mixed-effects logistic regression was performed to model independent demographic variables against mortality. A one-to-one propensity score matched dataset was created to compare the odd ratios of mortality between the 2 populations. Overall, 137,869 patient records, 85,286 (61.9%) from England and 52,583 (38.1%) from New York State, were extracted. Crude 30-day mortality for patients was significantly higher in the England compared with New York State [11,604 (13.6%) vs 3633 (6.9%) patients, P New York State (odds ratio 2.35, confidence interval 2.24-2.46, P New York State despite similar patient groups.

Emergency contraception use and counseling after changes in United States prescription status.

Science.gov (United States)

Kavanaugh, Megan L; Williams, Sanithia L; Schwarz, E Bimla

2011-06-30

Analysis of data from the 2006-2008 National Survey of Family Growth indicates that use of emergency contraception in the United States has increased after changes in its prescription status in 2006. However, clinicians continue to play a pivotal role in ensuring that women have accurate information about emergency contraception. Copyright © 2011 American Society for Reproductive Medicine. Published by Elsevier Inc. All rights reserved.

Citizen utilities: The emerging power paradigm

International Nuclear Information System (INIS)

Green, Jemma; Newman, Peter

2017-01-01

The emergence of citizen-based power systems in an integrated grid has been anticipated for decades. We can reveal how this is emerging in practice due to the significant uptake of solar photovoltaics (solar PV) and now battery storage in Perth, Australia. The high cost of electricity, high radiant energy levels and easy access to cheap Chinese technology, has led to dramatic buying during Perth's recent boomtown years. The traditional uni-directional power system is rapidly disrupting and this paper assesses where this may lead and what it means for the grid. Results of detailed monitoring in a solar powered house along with the impact of a battery storage system show the impact on the traditional grid is substantial but it will still be needed and must therefore adapt to the new distributed, bi-directional energy system. Surveys and price trajectories reveal how the trends to solar power storage will continue and how a citizen utility paradigm will emerge as the future grid building block using new blockchain support systems. Responses from utilities are then see to be fight, flight or innovate. - Highlights: • Citizen based power systems are emerging in Perth, Western Australia. • Solar power and battery storage systems are disrupting traditional utilities. • The grid will still have a role in the new, distributed power system. • The new system will lead to economic localism and the democratisation of power.

Thermal energy storage for solar power generation - State of the art

Science.gov (United States)

Shukla, K. N.

1981-12-01

High temperature storage for applications in solar-thermal electric systems is considered. Noting that thermal storage is in either the form of latent, sensible or chemically stored heat, sensible heat storage is stressed as the most developed of the thermal storage technologies, spanning direct heating of a storage medium from 120-1250 C. Current methods involve solids, packed beds, fluidized beds, liquids, hot water, organic liquids, and inorganic liquids and molten salts. Latent heat storage comprises phase-change materials that move from solid to liquid with addition of heat and liquid to solid with the removal of heat. Metals or inorganic salts are candidates, and the energy balances are outlined. Finally, chemical heat storage is examined, showing possible high energy densities through catalytic, thermal dissociation reactions.

Incorporating solid state drives into distributed storage systems

OpenAIRE

Wacha, Rosie

2012-01-01

Big data stores are becoming increasingly important in a variety of domains including scientific computing, internet applications, and business applications. For price and performance reasons, such storage is comprised of magnetic hard drives. To achieve the necessary degree of performance and reliability, the drives are configured into storage subsystems based on RAID (Redundant Array of Independent Disks). Because of their mechanical nature, hard drives are relatively power-hungry and slow ...

What's Up with the Storage Hierarchy?

DEFF Research Database (Denmark)

Bonnet, Philippe

2017-01-01

Ten years ago, Jim Gray observed that flash was about to replace magnetic disks. He also predicted that the need for low latency would make main memory databases commonplace. Most of his predictions have proven accurate. Today, who can make predictions about the future of the storage hierarchy......? Both main memory and storage systems are undergoing profound transformations. First, their design goals are increasingly complex (reconfigurable infrastructure at low latency, high resource utilization and stable energy footprint). Second, the status quo is not an option due to the shortcomings...... of existing solutions (memory bandwidth gap, inefficiency of generic memory/storage controllers). Third, new technologies are emerging (hybrid memories, non-volatile memories still under non-disclosure agreements, near-data processing in memory and storage). The impact of these transformations on the storage...

Surface chemical state of Ti powders and its alloys: Effect of storage conditions and alloy composition

Energy Technology Data Exchange (ETDEWEB)

Hryha, Eduard, E-mail: hryha@chalmers.se [Department of Materials and Manufacturing Technology, Chalmers University of Technology, Rännvägen 2A, SE - 412 96 Gothenburg (Sweden); Shvab, Ruslan [Department of Materials and Manufacturing Technology, Chalmers University of Technology, Rännvägen 2A, SE - 412 96 Gothenburg (Sweden); Bram, Martin; Bitzer, Martin [Forschungszentrum Jülich GmbH, Institute of Energy and Climate Research, Materials Synthesis and Processing (IEK-1), D-52425 Jülich (Germany); Nyborg, Lars [Department of Materials and Manufacturing Technology, Chalmers University of Technology, Rännvägen 2A, SE - 412 96 Gothenburg (Sweden)

2016-12-01

Highlights: • Powder particles of Ti, NiTi and Ti6Al4V are covered by homogeneous Ti-oxide layer. • Thickness of the Ti-oxide layer is in the range of 2.9 to 4.2 nm in as-atomized state. • Exposure to the air results in immediate oxide thickness increase of up to 30%. • Oxide thickness increase of only 15% during storage for 8 years. • High passivation of the Ti, NiTi and Ti6Al4V powder surface by Ti-oxide layer. - Abstract: High affinity of titanium to oxygen in combination with the high surface area of the powder results in tremendous powder reactivity and almost inevitable presence of passivation oxide film on the powder surface. Oxide film is formed during the short exposure of the powder to the environment at even a trace amount of oxygen. Hence, surface state of the powder determines its usefulness for powder metallurgy processing. Present study is focused on the evaluation of the surface oxide state of the Ti, NiTi and Ti6Al4V powders in as-atomized state and after storage under air or Ar for up to eight years. Powder surface oxide state was studied by X-ray photoelectron spectroscopy (XPS) and high resolution scanning electron microscopy (HR SEM). Results indicate that powder in as-atomized state is covered by homogeneous Ti-oxide layer with the thickness of ∼2.9 nm for Ti, ∼3.2 nm and ∼4.2 nm in case of Ti6Al4V and NiTi powders, respectively. Exposure to the air results in oxide growth of about 30% in case of Ti and only about 10% in case of NiTi and Ti6Al4V. After the storage under the dry air for two years oxide growth of only about 3-4% was detected in case of both, Ti and NiTi powders. NiTi powder, stored under the dry air for eight years, indicates oxide thickness of about 5.3 nm, which is about 30% thicker in comparison with the as-atomized powder. Oxide thickness increase of only ∼15% during the storage for eight years in comparison with the powder, shortly exposed to the air after manufacturing, was detected. Results indicate a

45 CFR 205.45 - Federal financial participation in relation to State emergency welfare preparedness.

Science.gov (United States)

2010-10-01

... with other government and voluntary welfare agencies, and welfare-related business and professional organizations and associations, in developing emergency operating plans and attaining operational readiness; (5..., as prescribed in “Guidelines for the Preparation of State Emergency Welfare Services Plan” issued by...

Energy storage. A challenge for energy transition

International Nuclear Information System (INIS)

Bart, Jean-Baptiste; Nekrasov, Andre; Pastor, Emmanuel; Benefice, Emmanuel; Brincourt, Thierry; Brisse, Annabelle; Cagnac, Albannie; Delille, Gauthier; Hinchliffe, Timothee; Lancel, Gilles; Jeandel, Elodie; Lefebvre, Thierry; Loevenbruck, Philippe; Penneau, Jean-Francois; Soler, Robert; Stevens, Philippe; Radvanyi, Etienne; Torcheux, Laurent

2017-06-01

Written by several EDF R and D engineers, this book aims at presenting an overview of knowledge and know-how of EDF R and D in the field of energy storage, and at presenting the different technologies and their application to electric power systems. After a description of the context related to a necessary energy transition, the authors present the numerous storage technologies. They distinguish direct storage of power (pumped storage water stations, compressed air energy storage, flywheels, the various electrochemical batteries, metal-air batteries, redox flow batteries, superconductors), thermal storage (power to heat, heat to power) and hydrogen storage (storage under different forms), and propose an overview of the situation of standardisation of storage technologies. In the next part, they give an overview of the main services provided by storage to the electric power system: production optimisation, frequency adjustment, grid constraint resolution, local smoothing of PV and wind production, supply continuity. The last part discusses perspectives regarding the role of tomorrow's storage in the field of electrical mobility, for emerging markets, and with respect to different scenarios

Study of storage capacity in various carbon/graphene-based solid-state supercapacitors

Science.gov (United States)

Subramaniam, C. K.; Boopalan, G.

2014-09-01

Solid-state electrochemical double-layer capacitor (SEDLC) forms excellent energy storage device for high-power applications. They are highly reliable, with no electrolyte leaks, and can be packaged to suit various applications. The electrode material can be activated carbon to graphene. These can have a range of particle size, surface area, pore size and pore distribution for charge storage. The emphasis will be to optimize the graphene to carbon blend in the electrodes which would provide appreciable storage density of the SEDLC. We can use perfluorosulfonic acid polymer as the solid electrolyte in the SEDLC assembly. They have high ionic conductivity, good thermal stability, and mechanical strength. They also have excellent long-term chemical stability. Carbon is widely used for many practical applications, especially for the adsorption of ions and molecules, as it is possible to synthesize one-, two- or three-dimensional (1-, 2-, or 3-D) carbons. Some of the problems in activated carbon like varying micro or mesopores, poor ion mobility due to varying pore distribution, low electrical conductivity, can be overcome using graphene and blends of graphene with carbon of the right pore dimension and distribution. Graphene in various structural nomenclatures have been used by various groups for charge storage. Graphene nanoplates (GNP), with narrow mesopore distributions have been effectively used for SEDLCs. SEDLCs assembled with GNP and blends of GNP with Vulcan XC and solid polymer electrolyte like Nafion show exceptional performance. The cyclic voltammetric studies show that they support high scan rates with substantial smaller capacitance drop as we increase scan rates. Optimization of the electrode structure in terms of blend percentage, binder content and interface character in the frequency and time domain provides excellent insight into the double-layer interface.

Combining computation and experiment to accelerate the discovery of new hydrogen storage materials

Science.gov (United States)

Siegel, Donald

2009-03-01

The potential of emerging technologies such as fuel cells (FCs) and photovoltaics for environmentally-benign power generation has sparked renewed interest in the development of novel materials for high density energy storage. For applications in the transportation sector, the demands placed upon energy storage media are especially stringent, as a potential replacement for fossil-fuel-powered internal combustion engines -- namely, the proton exchange membrane FC -- utilizes hydrogen as a fuel. Although hydrogen has about three times the energy density of gasoline by weight, its volumetric energy density (even at 700 bar) is roughly a factor of six smaller. Consequently, the safe and efficient storage of hydrogen has been identified as one of the key materials-based challenges to realizing a transition to FC vehicles. This talk will present an overview of recent efforts at Ford aimed at developing new materials for reversible, solid state hydrogen storage. A tight coupling between first-principles modeling and experiments has greatly accelerated our efforts, and several examples illustrating the benefits of this approach will be presented.

Emergency planning requirements and short-term countermeasures for commercial nuclear power plants in the United States

International Nuclear Information System (INIS)

Kantor, F.; Hogan, R.; Mohseni, A.

1995-01-01

Since the accident at the Three Mile Island Unit, the United States Nuclear Regulatory's Commission (NRC's) emergency planning regulations are now considered and an important part of the regulatory framework for protecting the public health and safety. Many aspects of the countermeasures are presented: Emergency Planning Zones (EPZ), off-Site emergency planning and preparedness, responsibilities of nuclear power plants operators and states and local government. Finally, protective action recommendations are given as well as the federal response to an emergency. The authors noted that the use of potassium iodide is not considered as an effective countermeasure for the public protection in the US. (TEC). 1 fig

The Epidemiology of Emergency Department Trauma Discharges in the United States.

Science.gov (United States)

DiMaggio, Charles J; Avraham, Jacob B; Lee, David C; Frangos, Spiros G; Wall, Stephen P

2017-10-01

Injury-related morbidity and mortality is an important emergency medicine and public health challenge in the United States. Here we describe the epidemiology of traumatic injury presenting to U.S. emergency departments (EDs), define changes in types and causes of injury among the elderly and the young, characterize the role of trauma centers and teaching hospitals in providing emergency trauma care, and estimate the overall economic burden of treating such injuries. We conducted a secondary retrospective, repeated cross-sectional study of the Nationwide Emergency Department Data Sample (NEDS), the largest all-payer ED survey database in the United States. Main outcomes and measures were survey-adjusted counts, proportions, means, and rates with associated standard errors (SEs) and 95% confidence intervals. We plotted annual age-stratified ED discharge rates for traumatic injury and present tables of proportions of common injuries and external causes. We modeled the association of Level I or II trauma center care with injury fatality using a multivariable survey-adjusted logistic regression analysis that controlled for age, sex, injury severity, comorbid diagnoses, and teaching hospital status. There were 181,194,431 (SE = 4,234) traumatic injury discharges from U.S. EDs between 2006 and 2012. There was a mean year-to-year decrease of 143 (95% CI = -184.3 to -68.5) visits per 100,000 U.S. population during the study period. The all-age, all-cause case-fatality rate for traumatic injuries across U.S. EDs during the study period was 0.17% (SE = 0.001%). The case-fatality rate for the most severely injured averaged 4.8% (SE = 0.001%), and severely injured patients were nearly four times as likely to be seen in Level I or II trauma centers (relative risk = 3.9 [95% CI = 3.7 to 4.1]). The unadjusted risk ratio, based on group counts, for the association of Level I or II trauma centers with mortality was risk ratio = 4.9 (95% CI = 4.5 to 5.3); however, after sex, age

Twelve Principles for Green Energy Storage in Grid Applications.

Science.gov (United States)

Arbabzadeh, Maryam; Johnson, Jeremiah X; Keoleian, Gregory A; Rasmussen, Paul G; Thompson, Levi T

2016-01-19

The introduction of energy storage technologies to the grid could enable greater integration of renewables, improve system resilience and reliability, and offer cost effective alternatives to transmission and distribution upgrades. The integration of energy storage systems into the electrical grid can lead to different environmental outcomes based on the grid application, the existing generation mix, and the demand. Given this complexity, a framework is needed to systematically inform design and technology selection about the environmental impacts that emerge when considering energy storage options to improve sustainability performance of the grid. To achieve this, 12 fundamental principles specific to the design and grid application of energy storage systems are developed to inform policy makers, designers, and operators. The principles are grouped into three categories: (1) system integration for grid applications, (2) the maintenance and operation of energy storage, and (3) the design of energy storage systems. We illustrate the application of each principle through examples published in the academic literature, illustrative calculations, and a case study with an off-grid application of vanadium redox flow batteries (VRFBs). In addition, trade-offs that can emerge between principles are highlighted.

Methane storage in metal-organic frameworks.

Science.gov (United States)

He, Yabing; Zhou, Wei; Qian, Guodong; Chen, Banglin

2014-08-21

Natural gas (NG), whose main component is methane, is an attractive fuel for vehicular applications. Realization of safe, cheap and convenient means and materials for high-capacity methane storage can significantly facilitate the implementation of natural gas fuelled vehicles. The physisorption based process involving porous materials offers an efficient storage methodology and the emerging porous metal-organic frameworks have been explored as potential candidates because of their extraordinarily high porosities, tunable pore/cage sizes and easily immobilized functional sites. In this view, we provide an overview of the current status of metal-organic frameworks for methane storage.

Three-dimensional multiphase effects in aquifer gas storage

Energy Technology Data Exchange (ETDEWEB)

Witherspoon, P.A.; Fuller, P.; Finsterle, S. [Lawrence Berkeley Laboratory, Berkeley, CA (United States)

1995-03-01

The underground storage of natural gas in the United States is one of the most widespread methods of storing energy in the United States. There are two main kinds of storage: (a) dry gas fields, and (b) aquifer storage fields. The storage of gas in dry gas fields involves the conversion of petroleum bearing reservoirs, usually after they have been depleted of any economic production, into a storage operation. An appropriate number of injection-withdrawal (I-W) wells are either drilled or converted from existing exploitation wells, and the storage operations begin by injecting gas to build up to some desired volume of gas in storage.

75 FR 69134 - Announcement Regarding States Triggering “off” of Tiers Three and Four of Emergency Unemployment...

Science.gov (United States)

2010-11-10

... Triggering ``off'' of Tiers Three and Four of Emergency Unemployment Compensation 2008 (EUC08) AGENCY... triggering ``off'' of Tiers Three and Four of the Emergency Unemployment Compensation (EUC08) program. Public... high unemployment states. The Department of Labor produces a trigger notice indicating which states...

76 FR 44611 - Announcement Regarding States Triggering “Off” of Tiers Three and Four of Emergency Unemployment...

Science.gov (United States)

2011-07-26

... Triggering ``Off'' of Tiers Three and Four of Emergency Unemployment Compensation 2008 (EUC08) AGENCY... triggering ``off'' of Tiers Three and Four of the Emergency Unemployment Compensation (EUC08) program. Public... high unemployment states. The Department of Labor produces a trigger notice indicating which states...

Innovative States: Emerging Family Support and Education Programs. Arkansas, Iowa, Oregon, Vermont, Washington. Second Edition.

Science.gov (United States)

Harvard Family Research Project, Cambridge, MA.

The five states featured in this second edition of "Innovative States" were chosen because they reflect crucial elements in an emerging understanding of state policy making in family support and education. Creative state partnerships involving program development and funding are a key ingredient to successful endeavors. States rely on…

Optimization of Comb-Drive Actuators [Nanopositioners for probe-based data storage and musical MEMS

NARCIS (Netherlands)

Engelen, Johannes Bernardus Charles

2011-01-01

The era of infinite storage seems near. To reach it, data storage capabilities need to grow, and new storage technologies must be developed.This thesis studies one aspect of one of the emergent storage technologies: optimizing electrostatic combdrive actuation for a parallel probe-based data storage

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme. Publication Date: August 2012

Energy Technology Data Exchange (ETDEWEB)

NONE

2012-09-15

The aim of this publication is to provide a practical tool for emergency planning for States embarking on a nuclear power programme and to fulfil, in part, functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency ('Assistance Convention'). Under Article 5.a (ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to State Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. As established in the publication Preparedness and Response for a Nuclear or Radiological Emergency (IAEA Safety Standards Series No. GS-R-2), the practical goal of emergency response is 'to ensure that arrangements are in place for a timely, managed, controlled, coordinated and effective response at the scene, and at the local, regional, national and international level, to any nuclear or radiological emergency'. In 2011 the IAEA General Conference, in resolution GC(55)/RES/9, encouraged States 'embarking on new nuclear power programmes to take timely and proactive steps, based upon gradual and systematic application of IAEA safety standards, to establish and sustain a strong safety culture'. It also 'emphasizes the importance for all Member States to implement emergency preparedness and response mechanisms and develop mitigation measures at a national level, consistent with the IAEA's Safety Standards, for improving emergency preparedness and response, facilitating communication in an emergency and contributing to harmonization of national criteria for protective and other actions'. This publication, issued in the IAEA Emergency Preparedness and Response Series, is intended to assist on steps to be taken by States embarking on a nuclear power programme to establish effective national capabilities and arrangements of preparedness for and response to a nuclear or radiological emergency (hereinafter referred to as

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme. Publication Date: August 2012

International Nuclear Information System (INIS)

2012-01-01

The aim of this publication is to provide a practical tool for emergency planning for States embarking on a nuclear power programme and to fulfil, in part, functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency ('Assistance Convention'). Under Article 5.a (ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to State Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. As established in the publication Preparedness and Response for a Nuclear or Radiological Emergency (IAEA Safety Standards Series No. GS-R-2), the practical goal of emergency response is 'to ensure that arrangements are in place for a timely, managed, controlled, coordinated and effective response at the scene, and at the local, regional, national and international level, to any nuclear or radiological emergency'. In 2011 the IAEA General Conference, in resolution GC(55)/RES/9, encouraged States 'embarking on new nuclear power programmes to take timely and proactive steps, based upon gradual and systematic application of IAEA safety standards, to establish and sustain a strong safety culture'. It also 'emphasizes the importance for all Member States to implement emergency preparedness and response mechanisms and develop mitigation measures at a national level, consistent with the IAEA's Safety Standards, for improving emergency preparedness and response, facilitating communication in an emergency and contributing to harmonization of national criteria for protective and other actions'. This publication, issued in the IAEA Emergency Preparedness and Response Series, is intended to assist on steps to be taken by States embarking on a nuclear power programme to establish effective national capabilities and arrangements of preparedness for and response to a nuclear or radiological emergency (hereinafter referred to as

Energy-information needs for US state-level policy making: minimal data requirements during normal and emergency periods

Energy Technology Data Exchange (ETDEWEB)

Barkenbus, J.N.; Leff, H.S.

1983-01-01

Since the oil embargo of 1973, state governments have increased their efforts to track and understand energy flows within their boundaries. There is a commonly perceived need to comprehend the status of present and expected future energy availability, demand, and price and to be prepared to exercise responsible and effective management during energy emergencies. This responsibility has brought with it new needs for accurate and timely state-level information on energy transactions and the external parameters that effect energy availability and disposition. Hence, we ask: what energy data are needed by a state, regardless of its idiosyncracies, during both normal and energy emergency periods, and to what extent are these data available now. We find that needed ongoing (core) data are only partially available at present, and that emergency data can be obtained only with a carefully planned monitoring program that can be fitted to specific emergency conditions. Overall, this paper provides a realistic assessment of the state-level energy data needed to provide state policy makers with sufficient information to make considered judgments. 7 references, 6 tables.

Waste Encapsulation and Storage Facility (WESF) Hazards Assessment

International Nuclear Information System (INIS)

COVEY, L.I.

2000-01-01

This report documents the hazards assessment for the Waste Encapsulation and Storage Facility (WESF) located on the U.S. Department of Energy (DOE) Hanford Site. This hazards assessment was conducted to provide the emergency planning technical basis for WESF. DOE Orders require an emergency planning hazards assessment for each facility that has the potential to reach or exceed the lowest level emergency classification

Current state and perspectives of spent fuel storage in Russia

International Nuclear Information System (INIS)

Kurnosov, V.A.; Tichonov, N.S.; Makarchuk, T.F.

1999-01-01

Twenty-nine power units at nine nuclear power plants, having a total installed capacity of 22 GW(e), are now in operation in the Russian Federation. They produce approximately 12% of the generated electricity in the country. The annual spent fuel arising is approximately 790 tU. The concept of the closed fuel cycle was adopted as the basis for nuclear power development in the Russian Federation, but until now this concept is only implemented for the fuel cycles of WWER-440 and BN-600 reactors. The WWER-1000 spent fuel is planned to be reprocessed at the reprocessing plant RT-2 which is under construction near Krasnoyarsk. The RBMK-1000 spent fuel is not reprocessed. It is meant to be stored in intermediate storage facilities at the NPP sites. The status of the spent fuel (SF) stored in the storage facilities is given in the paper. The principal characteristics of the fuel cycles of the Russian NPPs in the period up to 2015 is also given in the report. The key variant of the current spent fuel management at RBMK-1000 NPPs is storage in at-reactor and in away-from-reactor wet storage facilities at the power plant site with a capacity of 2,000 W. The storage capacity at the operating RBMKs (including the increase due to denser fuel assembly arrangement) will provide SF reception from the NPPs only up to 2005. For RBMK spent fuel, intermediate dry storage is foreseen at power plant sites in metallic concrete casks and thereafter transportation to the central storage facility at the RT-2 plant for long-term storage. The SF will be reprocessing after completion of the reprocessing plant at RT-2. In the Programme of Nuclear Power Development in the Russian Federation for the period 1998 to 2005 and for the period until 2010 year, provisions are made for the construction of a central dry storage facility before 2010. The facility will have a design capacity of 30,000 tU for WWER-1000 and RBMK-1000 spent fuel and is part of the reprocessing plant RT-2. The paper considers

Strength analysis and optimization of welding robot mechanism in emergency stop state

OpenAIRE

Zdeněk Poruba; Jiří Podešva; Ondřej František; Martin Fusek; Robert Brázda; Marek Sadílek

2016-01-01

The contribution deals with the strength analysis and optimization of the welding robot mechanism in emergency stop state. The common operational positioning of the welding robot is characterized by smooth course of speeds in the time. The resulting load does not differ significantly from the static loading. However the safety requirements given by the norm require the ability of emergency stop function. Since the course of speed in time is rather steep the higher values of acceleration and t...

Radioactive waste interim storage in Germany

International Nuclear Information System (INIS)

2015-12-01

The short summary on the radioactive waste interim storage in Germany covers the following issues: importance of interim storage in the frame of radioactive waste management, responsibilities and regulations, waste forms, storage containers, transport of vitrified high-level radioactive wastes from the reprocessing plants, central interim storage facilities (Gorleben, Ahaus, Nord/Lubmin), local interim storage facilities at nuclear power plant sites, federal state collecting facilities, safety, radiation exposure in Germany.

Multiagent-Based Distributed State of Charge Balancing Control for Distributed Energy Storage Units in AC Microgrids

DEFF Research Database (Denmark)

Li, Chendan; Coelho, Ernane Antônio Alves; Dragicevic, Tomislav

2017-01-01

In this paper, a multiagent-based distributed control algorithm has been proposed to achieve state of charge (SoC) balance of distributed energy storage (DES) units in an ac microgrid. The proposal uses frequency scheduling instead of adaptive droop gain to regulate the active power. Each DES unit...

Low-Level Radioactive Waste temporary storage issues

International Nuclear Information System (INIS)

1992-04-01

The Low-Level Radioactive Waste Policy Act of 1980 gave responsibility for the disposal of commercially generated low-level radioactive waste to the States. The Low-Level Radioactive Waste Policy Amendments Act of 1985 attached additional requirements for specific State milestones. Compact regions were formed and host States selected to establish disposal facilities for the waste generated within their borders. As a result of the Low-Level Radioactive Waste Policy Amendments Act of 1985, the existing low-level radioactive waste disposal sites will close at the end of 1992; the only exception is the Richland, Washington, site, which will remain open to the Northwest Compact region only. All host States are required to provide for disposal of low-level radioactive waste by January 1, 1996. States also have the option of taking title to the waste after January 1, 1993, or taking title by default on January 1, 1996. Low-level radioactive waste disposal will not be available to most States on January 1, 1993. The most viable option between that date and the time disposal is available is storage. Several options for storage can be considered. In some cases, a finite storage time will be permitted by the Nuclear Regulatory Commission at the generator site, not to exceed five years. If disposal is not available within that time frame, other options must be considered. There are several options that include some form of extension for storage at the generator site, moving the waste to an existing storage site, or establishing a new storage facility. Each of these options will include differing issues specific to the type of storage sought

Storage issues: where are we in 2006?

International Nuclear Information System (INIS)

Chahine, R.

2006-01-01

Hydrogen storage onboard vehicles continue to be a key technical challenge for the widespread use of hydrogen and fuel cell power technologies in transportation. There are national and international collaborative efforts to narrow the gap between the present state of storage technologies and what is required for a competitive hydrogen economy. On-board hydrogen storage approaches under investigation mainly include advanced metal hydrides, nanoporus adsorbants, and chemical hydrogen storage. The presentation will briefly discuss the state of art of these technologies, highlight recent advances and outline future directions. (author)

Underground Storage Tanks in Iowa

Data.gov (United States)

Iowa State University GIS Support and Research Facility — Underground storage tank (UST) sites which store petroleum in Iowa. Includes sites which have been reported to DNR, and have active or removed underground storage...

Medical research in emergency research in the European Union member states: tensions between theory and practice.

Science.gov (United States)

Kompanje, Erwin J O; Maas, Andrew I R; Menon, David K; Kesecioglu, Jozef

2014-04-01

In almost all of the European Union member states, prior consent by a legal representative is used as a substitute for informed patient consent for non-urgent medical research. Deferred (patient and/or proxy) consent is accepted as a substitute in acute emergency research in approximately half of the member states. In 12 European Union member states emergency research is not mentioned in national law. Medical research in the European Union is covered by the Clinical Trial Directive 2001/20/EC. A proposal for a regulation by the European Commission is currently being examined by the European Parliament and the Council and will replace Directive 2001/20/EC. Deferred patient and/or proxy consent is allowed in the proposed regulation, but does not fit completely in the practice of emergency research. For example, deferred consent is only possible when legal representatives are not available. This criterion will delay inclusion of patients in acute life-threatening conditions in short time frames. As the regulation shall be binding in its entirety in all member states, emergency research in acute situations is still not possible as it should be.

Review of Current State of the Art and Key Design Issues With Potential Solutions for Liquid Hydrogen Cryogenic Storage Tank Structures for Aircraft Applications

Science.gov (United States)

Mital, Subodh K.; Gyekenyesi, John Z.; Arnold, Steven M.; Sullivan, Roy M.; Manderscheid, Jane M.; Murthy, Pappu L. N.

2006-01-01

Due to its high specific energy content, liquid hydrogen (LH2) is emerging as an alternative fuel for future aircraft. As a result, there is a need for hydrogen tank storage systems, for these aircraft applications, that are expected to provide sufficient capacity for flight durations ranging from a few minutes to several days. It is understood that the development of a large, lightweight, reusable cryogenic liquid storage tank is crucial to meet the goals of and supply power to hydrogen-fueled aircraft, especially for long flight durations. This report provides an annotated review (including the results of an extensive literature review) of the current state of the art of cryogenic tank materials, structural designs, and insulation systems along with the identification of key challenges with the intent of developing a lightweight and long-term storage system for LH2. The broad classes of insulation systems reviewed include foams (including advanced aerogels) and multilayer insulation (MLI) systems with vacuum. The MLI systems show promise for long-term applications. Structural configurations evaluated include single- and double-wall constructions, including sandwich construction. Potential wall material candidates are monolithic metals as well as polymer matrix composites and discontinuously reinforced metal matrix composites. For short-duration flight applications, simple tank designs may suffice. Alternatively, for longer duration flight applications, a double-wall construction with a vacuum-based insulation system appears to be the most optimum design. The current trends in liner material development are reviewed in the case that a liner is required to minimize or eliminate the loss of hydrogen fuel through permeation.

Ten major trends now emerging in the United States

Energy Technology Data Exchange (ETDEWEB)

Naisbitt, J.

1978-01-01

Using a special analytical procedure for tracking and assessing events reported in the nation's newspapers, the Center for Policy Process has identified ten emerging trends in the United States that are having a major impact on all our lives and on all businesses and industries--and especially on the electric utility industry. Although the trends may move in contradictory directions and have different degrees of significance, all have been carefully monitored for a considerable length of time. All are firmly established--and are not to be viewed as the momentary interests of certain radical elements of the population. The ten trends are: the fast-emerging clash between nuclear fuel and coal as an environmental health issue; displacement of racism and sexism by ''ageism'' as society's most prominent anti-discrimination preoccupation, and the complete elimination soon of mandatory retirement; in government and technology, the phenomenon of ''appropriate scale'' replacing economies of scale, emergence of single-issue political organizations; coming-of-age of the recycling ethic; emergence of ''access to capital'' as the new equity issue--the new rights issue; continuing shift from centralization to decentralization; movement of society in the dual directions of high technology/high touch; business' increasing involvement with the well-established accountability trend; and shift from a representative democracy to a participatory democracy--this profound change in American democracy actually began about a decade or so ago.

Energy storage. The actual challenge for tomorrow

International Nuclear Information System (INIS)

Combe, Matthieu; Danielo, Olivier

2016-09-01

As methods of energy production are now diversified and efficient, the challenge is now their integration into the grid, and their storage. Thus, this publication first proposes a set of articles which address perspectives and realisations (or projects) related to energy storage: the challenge of modernisation of Pump Storage Power plants (PSP), the possibilities provided by power-to-gas technology to store electricity, the possibilities provided by coupling of CO 2 storage and geothermal energy. Other aspects concern electric power storage at the back end of the supply chain: the Corri-door project of 200 terminals for fast electric charging (for electric vehicles), the emergence of the domestic battery as storage mean in different counties. More prospective projects are also evoked: the use of hot water in Hawaii to store photovoltaic solar electricity and inspired projects by ENGIE and EDF, the perspective of energy storage on miniaturised chips, and a three-wheel light vehicle (Moe) using solar energy and developed by the Evovelo startup

Viability of platelets following storage in the irradiated state. A pair-controlled study

International Nuclear Information System (INIS)

Read, E.J.; Kodis, C.; Carter, C.S.; Leitman, S.F.

1988-01-01

Gamma irradiation of blood products is a standard practice recommended for the prevention of posttransfusion graft-versus-host disease in susceptible hosts. We studied the effects of irradiation on stored platelet concentrates and evaluated whether platelets could be stored for 5 days in the irradiated state without adverse effects on their viability. Using a pair-controlled design in which each of six normal subjects acted as his or her own control, we compared in vitro storage characteristics and in vivo kinetics of platelet concentrates exposed to 30 Gy and stored for 5 days with those of platelet concentrates simply stored for 5 days without irradiation. Irradiation had no significant effects on in vitro storage characteristics (platelet count, mean platelet volume, pH, and white cell count) or on in vivo kinetics, including initial recovery and mean platelet survival. Using the multiple-hit model, initial recovery was 49.6 +/- 10.8 percent, and mean platelet survival was 5.6 +/- 1.05 days for irradiated concentrates, compared with 51.3 +/- 13.0 percent and 5.9 +/- 0.50 days, respectively, for the unirradiated control concentrates. We conclude that irradiation of platelet concentrates with up to 30 Gy has no effect on their in vivo recovery or survival, and that irradiation administered before storage of platelet concentrates does not interfere with their clinical efficacy

Emergency reactor core cooling facility

International Nuclear Information System (INIS)

Yoshikawa, Kazuhiro; Kinoshita, Shoichiro; Iwata, Yasutaka.

1996-01-01

The present invention provides an emergency reactor core cooling device for a BWR type nuclear power plant. Namely, D/S pit (gas/water separator storage pool) water is used as a water source for the emergency reactor core cooling facility upon occurrence of loss of coolant accidents (LOCA) by introducing the D/S pit water to the emergency reactor core cooling (ECCS) pump. As a result, the function as the ECCS facility can be eliminated from the function of the condensate storage tank which has been used as the ECCS facility. If the function is unnecessary, the level of quality control and that of earthquake resistance of the condensate storage tank can be lowered to a level of ordinary facilities to provide an effect of reducing the cost. On the other hand, since the D/S pit as the alternative water source is usually a facility at high quality control level and earthquake resistant level, there is no problem. The quality of the water in the D/S pit can be maintained constant by elevating pressure of the D/S pit water by a suppression pool cleanup (SPCU) pump to pass it through a filtration desalter thereby purifying the D/S pit water during the plant operation. (I.S.)

Emergency reactor core cooling facility

Energy Technology Data Exchange (ETDEWEB)

Yoshikawa, Kazuhiro; Kinoshita, Shoichiro; Iwata, Yasutaka

1996-11-01

The present invention provides an emergency reactor core cooling device for a BWR type nuclear power plant. Namely, D/S pit (gas/water separator storage pool) water is used as a water source for the emergency reactor core cooling facility upon occurrence of loss of coolant accidents (LOCA) by introducing the D/S pit water to the emergency reactor core cooling (ECCS) pump. As a result, the function as the ECCS facility can be eliminated from the function of the condensate storage tank which has been used as the ECCS facility. If the function is unnecessary, the level of quality control and that of earthquake resistance of the condensate storage tank can be lowered to a level of ordinary facilities to provide an effect of reducing the cost. On the other hand, since the D/S pit as the alternative water source is usually a facility at high quality control level and earthquake resistant level, there is no problem. The quality of the water in the D/S pit can be maintained constant by elevating pressure of the D/S pit water by a suppression pool cleanup (SPCU) pump to pass it through a filtration desalter thereby purifying the D/S pit water during the plant operation. (I.S.)

Model Design on Emergency Power Supply of Electric Vehicle

Directory of Open Access Journals (Sweden)

Yuanliang Zhao

2017-01-01

Full Text Available According to the mobile storage characteristic of electric vehicles, an emergency power supply model about the electric vehicles is presented through analyzing its storage characteristic. The model can ensure important consumer loss minimization during power failure or emergency and can make electric vehicles cost minimization about running, scheduling, and vindicating. In view of the random dispersion feature in one area, an emergency power supply scheme using the electric vehicles is designed based on the K-means algorithm. The purpose is to improve the electric vehicles initiative gathering ability and reduce the electric vehicles gathering time. The study can reduce the number of other emergency power supply equipment and improve the urban electricity reliability.

Analysis and simulation of emergency departments: state of the art and prospects

OpenAIRE

Vanbrabant, Lien; Braekers, Kris; Ramaekers, Katrien

2017-01-01

This abstract gives a brief overview of the state of the art on the analysis and simulation of emergency departments in hospitals. Based on this, research opportunities which will be addressed during my PhD are identified.

The many faces of working memory and short-term storage.

Science.gov (United States)

Cowan, Nelson

2017-08-01

The topic of working memory (WM) is ubiquitous in research on cognitive psychology and on individual differences. According to one definition, it is a small amount of information kept in a temporary state of heightened accessibility; it is used in most types of communication and problem solving. Short-term storage has been defined as the passive (i.e., non-attention-based, nonstrategic) component of WM or, alternatively, as a passive store separate from an attention-based WM. Here I note that much confusion has been created by the use by various investigators of many, subtly different definitions of WM and short-term storage. The definitions are sometimes made explicit and sometimes implied. As I explain, the different definitions may have stemmed from the use of a wide variety of techniques to explore WM, along with differences in theoretical orientation. By delineating nine previously used definitions of WM and explaining how additional ones may emerge from combinations of these nine, I hope to improve scientific discourse on WM. The potential advantages of clarity about definitions of WM and short-term storage are illustrated with respect to several ongoing research controversies.

Towards flexible solid-state supercapacitors for smart and wearable electronics.

Science.gov (United States)

Dubal, Deepak P; Chodankar, Nilesh R; Kim, Do-Heyoung; Gomez-Romero, Pedro

2018-03-21

Flexible solid-state supercapacitors (FSSCs) are frontrunners in energy storage device technology and have attracted extensive attention owing to recent significant breakthroughs in modern wearable electronics. In this study, we review the state-of-the-art advancements in FSSCs to provide new insights on mechanisms, emerging electrode materials, flexible gel electrolytes and novel cell designs. The review begins with a brief introduction on the fundamental understanding of charge storage mechanisms based on the structural properties of electrode materials. The next sections briefly summarise the latest progress in flexible electrodes (i.e., freestanding and substrate-supported, including textile, paper, metal foil/wire and polymer-based substrates) and flexible gel electrolytes (i.e., aqueous, organic, ionic liquids and redox-active gels). Subsequently, a comprehensive summary of FSSC cell designs introduces some emerging electrode materials, including MXenes, metal nitrides, metal-organic frameworks (MOFs), polyoxometalates (POMs) and black phosphorus. Some potential practical applications, such as the development of piezoelectric, photo-, shape-memory, self-healing, electrochromic and integrated sensor-supercapacitors are also discussed. The final section highlights current challenges and future perspectives on research in this thriving field.

Shredder: GPU-Accelerated Incremental Storage and Computation

OpenAIRE

Bhatotia, Pramod; Rodrigues, Rodrigo; Verma, Akshat

2012-01-01

Redundancy elimination using data deduplication and incremental data processing has emerged as an important technique to minimize storage and computation requirements in data center computing. In this paper, we present the design, implementation and evaluation of Shredder, a high performance content-based chunking framework for supporting incremental storage and computation systems. Shredder exploits the massively parallel processing power of GPUs to overcome the CPU bottlenecks of content-ba...

Surface-enhanced raman optical data storage system

Science.gov (United States)

Vo-Dinh, Tuan

1994-01-01

An improved Surface-Enhanced Raman Optical Data Storage System (SERODS) is disclosed. In the improved system, entities capable of existing in multiple reversible states are present on the storage device. Such entities result in changed Surface-Enhanced Raman Scattering (SERS) when localized state changes are effected in less than all of the entities. Therefore, by changing the state of entities in localized regions of a storage device, the SERS emissions in such regions will be changed. When a write-on device is controlled by a data signal, such a localized regions of changed SERS emissions will correspond to the data written on the device. The data may be read by illuminating the surface of the storage device with electromagnetic radiation of an appropriate frequency and detecting the corresponding SERS emissions. Data may be deleted by reversing the state changes of entities in regions where the data was initially written. In application, entities may be individual molecules which allows for the writing of data at the molecular level. A read/write/delete head utilizing near-field quantum techniques can provide for a write/read/delete device capable of effecting state changes in individual molecules, thus providing for the effective storage of data at the molecular level.

Energy information needs for U. S. state-level policy making: Minimal data requirements during normal and emergency periods

Energy Technology Data Exchange (ETDEWEB)

Barkenbus, J.N.; Leff, H.S.

1983-01-01

Since the oil embargo of 1973, state governments have increased their efforts to track and understand energy flows within their boundaries. There is a commonly perceived need to comprehend the status of present and expected future energy availability, demand, and price and to be prepared to exercise responsible and effective management during energy emergencies. This responsibility has brought with it new needs for accurate and timely state-level information on energy transactions and the external parameters that effect energy availability and disposition. What energy data are needed by a state, regardless of its idiosyncracies, during both normal and energy emergency periods, and to what extent are these data available now. The authors find that needed ongoing (core) data are only partially available at present, and that emergency data can be obtained only with a carefully planned monitoring program that can be fitted to specific emergency conditions. Overall, this paper provides a realistic assessment of the state-level energy data needed to provide state policy makers with sufficient information to make considered judgments.

Security, Violent Events, and Anticipated Surge Capabilities of Emergency Departments in Washington State

Science.gov (United States)

Weyand, Jonathan S.; Junck, Emily; Kang, Christopher S.; Heiner, Jason D.

2017-01-01

Introduction Over the past 15 years, violent threats and acts against hospital patients, staff, and providers have increased and escalated. The leading area for violence is the emergency department (ED) given its 24/7 operations, role in patient care, admissions gateway, and center for influxes during acute surge events. This investigation had three objectives: to assess the current security of Washington State EDs; to estimate the prevalence of and response to threats and violence in Washington State EDs; and to appraise the Washington State ED security capability to respond to acute influxes of patients, bystanders, and media during acute surge events. Methods A voluntary, blinded, 28-question Web-based survey developed by emergency physicians was electronically delivered to all 87 Washington State ED directors in January 2013. We evaluated responses by descriptive statistical analyses. Results Analyses occurred after 90% (78/87) of ED directors responded. Annual censuses of the EDs ranged from violent threats or acts occurring in their ED. Of these, 93% were directed towards nursing staff, 90% towards physicians, 74% towards security personnel, and 51% towards administrative personnel. Nearly half (48%) noted incidents directed towards another patient, and 50% towards a patient’s family or friend. These events were variably reported to the hospital administration. After an acute surge event, 35% believed the initial additional security response would not be adequate, with 26% reporting no additional security would be available within 15 minutes. Conclusion Our study reveals the variability of ED security staffing and a heterogeneity of capabilities throughout Washington State. These deficiencies and vulnerabilities highlight the need for other EDs and regional emergency preparedness planners to conduct their own readiness assessments. PMID:28435498

Associations between active shooter incidents and gun ownership and storage among families with young children in the United States.

Science.gov (United States)

Morrissey, Taryn W

2017-07-01

The presence of firearms and their unsafe storage in the home can increase risk of firearm-related death and injury, but public opinion suggests that firearm ownership is a protective factor against gun violence. This study examined the effects of a recent nearby active shooter incident on gun ownership and storage practices among families with young children. A series of regression models, with data from the nationally representative Early Childhood Longitudinal Study-Birth Cohort merged with the FBI's Active Shooter Incidents data collected in 2003-2006, were used to examine whether household gun ownership and storage practices differed in the months prior to and following an active shooter incident that occurred anywhere in the United States or within the same state. Approximately one-fifth of young children lived in households with one or more guns; of these children, only two-thirds lived in homes that stored all guns in locked cabinets. Results suggest that the experience of a recent active shooter incident was associated with an increased likelihood of storing all guns locked, with the magnitude dependent on the temporal and geographic proximity of the incident. The severity of the incident, defined as the number of fatalities, predicted an increase in storing guns locked. Findings suggest that public shootings change behaviors related to firearm storage among families with young children. Copyright © 2017 Elsevier Inc. All rights reserved.

Emergence of a phase transition for the required amount of storage in highly renewable electricity systems

DEFF Research Database (Denmark)

Jensen, Tue Vissing; Greiner, Martin

2014-01-01

-up of the required amount of storage, with renewable penetration being the control parameter and average relative storage filling level being the order parameter. A singularity appears for the required storage energy capacity at a renewable penetration determined by the parameters of the storage. For an ideal...... storage with no roundtrip losses the transition occurs at 100% renewable penetration. Moreover, the required storage energy capacity is strongly enhanced by temporal correlations on the synoptic weather time scale. A Markov process is proposed, which reproduces these findings....

Ion-ion collisions and ion storage rings

International Nuclear Information System (INIS)

Mowat, J.R.

1988-01-01

Improved understanding of fundamental ion-ion interactions is expected to emerge from research carried out with ion storage rings. In this short survey the significant advantages and unique features that make stored ions useful targets for collision experiments are reviewed and discussed. It is pointed out that improvements to existing ion-ion experiments, as well as qualitatively new experiments, should occur over the next few years as ion storage rings become available for atomic physics. Some new experiments are suggested which are difficult if not impossible with present-day technology, but which seem feasible at storage rings facilities. (orig.)

Enhanced electrocaloric analysis and energy-storage performance of lanthanum modified lead titanate ceramics for potential solid-state refrigeration applications.

Science.gov (United States)

Zhang, Tian-Fu; Huang, Xian-Xiong; Tang, Xin-Gui; Jiang, Yan-Ping; Liu, Qiu-Xiang; Lu, Biao; Lu, Sheng-Guo

2018-01-10

The unique properties and great variety of relaxer ferroelectrics make them highly attractive in energy-storage and solid-state refrigeration technologies. In this work, lanthanum modified lead titanate ceramics are prepared and studied. The giant electrocaloric effect in lanthanum modified lead titanate ceramics is revealed for the first time. Large refrigeration efficiency (27.4) and high adiabatic temperature change (1.67 K) are achieved by indirect analysis. Direct measurements of electrocaloric effect show that reversible adiabatic temperature change is also about 1.67 K, which exceeds many electrocaloric effect values in current direct measured electrocaloric studies. Both theoretical calculated and direct measured electrocaloric effects are in good agreements in high temperatures. Temperature and electric field related energy storage properties are also analyzed, maximum energy-storage density and energy-storage efficiency are about 0.31 J/cm 3 and 91.2%, respectively.

Overview of energy/hydrogen storage: state-of-the-art of the technologies and prospects for nanomaterials

International Nuclear Information System (INIS)

Conte, M.; Prosini, P.P.; Passerini, S.

2004-01-01

A sustainable energy economy will be demanding primary energy sources, preferably renewable and mainly domestically available, using energy carriers, such as hydrogen and electricity, able to solve environmental problems and to assure adequate energy security. Instrumental to such goals will be the research and development of storage systems with performance characteristics compatible with major application requirements. Lithium or nickel are replacing lead in batteries, in order to better meet the extremely varying technical and economical requirements in fast growing conventional and new applications. Moreover, few technologies now permit to store hydrogen by modifying its physical state in gaseous or liquid form. The variety of hydrogen needs in the energy systems and in the vehicular sector is justifying the effort on solid state (metal hydrides and carbon nanostructures) or chemical systems (chemical hydrides). In this overview, emphasis is given to the major achievements in the field of electrical energy and hydrogen storage, in relation to the technological goals, which have been proposed in the major public research and collaborative programs throughout the world

United States and Israeli Homeland Security: A Comparative Analysis of Emergency Preparedness Efforts

National Research Council Canada - National Science Library

Pockett, Consuella B

2005-01-01

This paper will provide a comparative analysis of the United States (U.S.) Department of Homeland Security's Emergency Preparedness and Response directorate and the Israel Defense Forces Home Front Command...

Energy storage reinforces competitive business practices

International Nuclear Information System (INIS)

Makansi, J.

1994-01-01

This article examines how the ability to ''store'' electricity can pay handsome dividends in a competitive environment. Priorities change when industries are deregulated. Indeed, new priorities are being established for electric generation--low cost, efficiency, product distinction for marketing purposes, etc. are all more critical today. Perhaps not so obvious is the fundamental role of energy storage in a fully competitive marketplace. In fact, rarely do a technology development and a changing business climate play off against each other so nicely. Consider the function of the emerging electricity broker, or power marketer. Imagine the premium that broker could command with access to a large increment of electricity--purchased at a low price--and supplied at a moment's notice for a substantially higher price. Storage of electricity would mean that the investment in excess available generation capacity to supply so-called peak demand could be avoided. It also means that electricity could be brokered like other commodities--that is purchased, stockpiled, and sold to reflect market conditions across a wider geographical region and time spain. Benefits accrue to transmission and distribution, in addition to generation. Energy storage helps to manage the increasing stress placed on the grid as a result of intermittent sources of power and large numbers of cogenerators and small power producers. On the customer side, any ratepayer large or small could, theoretically, play the spot market in electric supply with a reserve to tap in emergencies. For a parallel in other deregulated markets, recall how storage has become an important factor in natural-gas contracting. Quality of electricity also can be improved by applying storage to stabilize the grid, especially along the distribution system at substations. And the opening of vast markets for electricity consumption, such as electric vehicles, depends in large measure on electric storage

The LSU Electron Storage Ring, the first commercially-built storage ring

International Nuclear Information System (INIS)

Sah, R.

1990-01-01

The Brobeck Division of Maxwell Laboratories, Inc., is building the first industrially-produced storage ring. It will be located at Louisiana State University (LSU) at the Center for Advanced Microstructures and Devices (CAMD) in Baton Rouge. The purpose of this electron storage ring is to provide intense beams of x-rays to advance the state-of-the-art in lithography and to permit research in a broad area. This facility consists of a 1.2 GeV, 400 mA electron storage ring with a 200 MeV linac injector. The magnet lattice is a Chasman-Green design (double-bend achromat), and the ring circumference is 55.2 meters. There are four 3.0 meter, dispersion-free straight sections, one for injection, one for the 500 MHz RF cavity, and two for possible future insertion devices. The storge ring construction project is in the detailed-design stage, and many systems are in the initial stages of fabrication. 4 figs., 1 tab

Solid state phase change materials for thermal energy storage in passive solar heated buildings

Science.gov (United States)

Benson, D. K.; Christensen, C.

1983-11-01

A set of solid state phase change materials was evaluated for possible use in passive solar thermal energy storage systems. The most promising materials are organic solid solutions of pentaerythritol, pentaglycerine and neopentyl glycol. Solid solution mixtures of these compounds can be tailored so that they exhibit solid-to-solid phase transformations at any desired temperature within the range from less than 25 deg to 188 deg. Thermophysical properties such as thermal conductivity, density and volumetric expansion were measured. Computer simulations were used to predict the performance of various Trombe wall designs incorporating solid state phase change materials. Optimum performance was found to be sensitive to the choice of phase change temperatures and to the thermal conductivity of the phase change material. A molecular mechanism of the solid state phase transition is proposed and supported by infrared spectroscopic evidence.

49 CFR 193.2509 - Emergency procedures.

Science.gov (United States)

2010-10-01

... ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) PIPELINE SAFETY LIQUEFIED NATURAL GAS FACILITIES... emergency, including catastrophic failure of an LNG storage tank. (4) Cooperating with appropriate local...

Emergent low-energy bound states in the two-orbital Hubbard model

Science.gov (United States)

Núñez-Fernández, Y.; Kotliar, G.; Hallberg, K.

2018-03-01

A repulsive Coulomb interaction between electrons in different orbitals in correlated materials can give rise to bound quasiparticle states. We study the nonhybridized two-orbital Hubbard model with intra- (inter)orbital interaction U (U12) and different bandwidths using an improved dynamical mean-field theory numerical technique which leads to reliable spectra on the real energy axis directly at zero temperature. We find that a finite density of states at the Fermi energy in one band is correlated with the emergence of well-defined quasiparticle states at excited energies Δ =U -U12 in the other band. These excitations are interband holon-doublon bound states. At the symmetric point U =U12 , the quasiparticle peaks are located at the Fermi energy, leading to a simultaneous and continuous Mott transition settling a long-standing controversy.

Design criteria tank farm storage and staging facility

International Nuclear Information System (INIS)

Lott, D.T.

1995-01-01

Tank Farms Operations must store/stage material and equipment until work packages are ready to work. Consumable materials are also required to be stored for routine and emergency work. Safety issues based on poor housekeeping and material deterioration due to weather damage has resulted from inadequate storage space. It has been determined that a storage building in close proximity to the Tank Farm work force would be cost effective. This document provides the design criteria for the design of the storage and staging buildings near 272AW and 272WA buildings

Transportation and storage of foreign spent power reactor fuel

International Nuclear Information System (INIS)

1979-01-01

This report describes the generic actions to be taken by the Department of Energy, in cooperation with other US government agencies, foreign governments, and international organizations, in support of the implementation of Administration policies with respect to the following international spent fuel management activities: bilateral cooperation related to expansion of foreign national storage capacities; multilateral and international cooperation related to development of multinational and international spent fuel storage regimes; fee-based transfer of foreign spent power reactor fuel to the US for storage; and emergency transfer of foreign spent power reactor fuel to the US for storage

Optimal control, investment and utilization schemes for energy storage under uncertainty

Science.gov (United States)

Mirhosseini, Niloufar Sadat

Energy storage has the potential to offer new means for added flexibility on the electricity systems. This flexibility can be used in a number of ways, including adding value towards asset management, power quality and reliability, integration of renewable resources and energy bill savings for the end users. However, uncertainty about system states and volatility in system dynamics can complicate the question of when to invest in energy storage and how best to manage and utilize it. This work proposes models to address different problems associated with energy storage within a microgrid, including optimal control, investment, and utilization. Electric load, renewable resources output, storage technology cost and electricity day-ahead and spot prices are the factors that bring uncertainty to the problem. A number of analytical methodologies have been adopted to develop the aforementioned models. Model Predictive Control and discretized dynamic programming, along with a new decomposition algorithm are used to develop optimal control schemes for energy storage for two different levels of renewable penetration. Real option theory and Monte Carlo simulation, coupled with an optimal control approach, are used to obtain optimal incremental investment decisions, considering multiple sources of uncertainty. Two stage stochastic programming is used to develop a novel and holistic methodology, including utilization of energy storage within a microgrid, in order to optimally interact with energy market. Energy storage can contribute in terms of value generation and risk reduction for the microgrid. The integration of the models developed here are the basis for a framework which extends from long term investments in storage capacity to short term operational control (charge/discharge) of storage within a microgrid. In particular, the following practical goals are achieved: (i) optimal investment on storage capacity over time to maximize savings during normal and emergency

Battery storage for supplementing renewable energy systems

Energy Technology Data Exchange (ETDEWEB)

None, None

2009-01-18

The battery storage for renewable energy systems section of the Renewable Energy Technology Characterizations describes structures and models to support the technical and economic status of emerging renewable energy options for electricity supply.

Hydrogen storage - are we making progress?

International Nuclear Information System (INIS)

Blair, L.; Milliken, J.; Satyapal, S.

2004-01-01

'Full text:' The efficient storage of hydrogen in compact, lightweight systems that allow greater than 300-mile range has been identified as one of the major technical challenges facing the practical commercialization of fuel cell power systems for light-duty vehicles. Following the hydrogen vision announced by President Bush in his 2003 State of the Union address, the U.S. Department of Energy issued a Grand Challenge, soliciting ideas from universities, national laboratories, and industry. DOE's National Hydrogen Storage Project, an aggressive and innovative research program focused on materials R and D, will be launched in Fiscal Year 2005. An intensive effort is also underway in the private sector, both in the U.S. and abroad, to meet the challenging on-board hydrogen storage requirements. A historical perspective of hydrogen storage research and development will be provided and the current DOE technical targets for hydrogen storage systems will be discussed. The state-of-the-art in hydrogen storage will be summarized and recent progress assessed. Finally future research directions and areas of technical emphasis will be described. (author)

47 CFR 11.55 - EAS operation during a State or Local Area emergency.

Science.gov (United States)

2010-10-01

..., earthquakes, heavy snows, icing conditions, widespread fires, etc. Man-made emergencies may include: toxic gas...) SDARS licensees and DBS providers may participate in EAS at the state and local level and make their...

Considerations in Emergency Preparedness and Response for a State Embarking on a Nuclear Power Programme. Publication Date: June 2013 (French Edition)

International Nuclear Information System (INIS)

2013-01-01

The aim of this publication is to provide a practical tool for emergency planning for States embarking on a nuclear power programme and to fulfil, in part, functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency ('Assistance Convention'). Under Article 5.a (ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to State Parties and Member States information concerning methodologies, techniques and available results of research relating to such emergencies. As established in the publication Preparedness and Response for a Nuclear or Radiological Emergency (IAEA Safety Standards Series No. GS-R-2), the practical goal of emergency response is 'to ensure that arrangements are in place for a timely, managed, controlled, coordinated and effective response at the scene, and at the local, regional, national and international level, to any nuclear or radiological emergency'. In 2011 the IAEA General Conference, in resolution GC(55)/RES/9, encouraged States 'embarking on new nuclear power programmes to take timely and proactive steps, based upon gradual and systematic application of IAEA safety standards, to establish and sustain a strong safety culture'. It also 'emphasizes the importance for all Member States to implement emergency preparedness and response mechanisms and develop mitigation measures at a national level, consistent with the IAEA's Safety Standards, for improving emergency preparedness and response, facilitating communication in an emergency and contributing to harmonization of national criteria for protective and other actions'. This publication, issued in the IAEA Emergency Preparedness and Response Series, is intended to assist on steps to be taken by States embarking on a nuclear power programme to establish effective national capabilities and arrangements of preparedness for and response to a nuclear or radiological emergency (hereinafter referred to as

Archiving and Managing Remote Sensing Data using State of the Art Storage Technologies

Science.gov (United States)

Lakshmi, B.; Chandrasekhara Reddy, C.; Kishore, S. V. S. R. K.

2014-11-01

Integrated Multi-mission Ground Segment for Earth Observation Satellites (IMGEOS) was established with an objective to eliminate human interaction to the maximum extent. All emergency data products will be delivered within an hour of acquisition through FTP delivery. All other standard data products will be delivered through FTP within a day. The IMGEOS activity was envisaged to reengineer the entire chain of operations at the ground segment facilities of NRSC at Shadnagar and Balanagar campuses to adopt an integrated multi-mission approach. To achieve this, the Information Technology Infrastructure was consolidated by implementing virtualized tiered storage and network computing infrastructure in a newly built Data Centre at Shadnagar Campus. One important activity that influences all other activities in the integrated multi-mission approach is the design of appropriate storage and network architecture for realizing all the envisaged operations in a highly streamlined, reliable and secure environment. Storage was consolidated based on the major factors like accessibility, long term data protection, availability, manageability and scalability. The broad operational activities are reception of satellite data, quick look, generation of browse, production of standard and valueadded data products, production chain management, data quality evaluation, quality control and product dissemination. For each of these activities, there are numerous other detailed sub-activities and pre-requisite tasks that need to be implemented to support the above operations. The IMGEOS architecture has taken care of choosing the right technology for the given data sizes, their movement and long-term lossless retention policies. Operational costs of the solution are kept to the minimum possible. Scalability of the solution is also ensured. The main function of the storage is to receive and store the acquired satellite data, facilitate high speed availability of the data for further

Radioactive solid waste inventories at United States Department of Energy burial and storage sites

International Nuclear Information System (INIS)

Watanabe, T.

1986-06-01

Radioactive solid waste inventories are given for United States Department of Energy (DOE) burial and storage sites. These data are obtained from the Solid Waste Information Management System (SWIMS) and reflect the inventories as of the end of the calendar year 1985. This report differs from previous issues in that the data cutoff date is December 31, 1985, rather than the fiscal year end. Another difference from previous issues is that data for the TRU categories 1 and 6 have been omitted

Emergency planning and preparedness for a nuclear accident

International Nuclear Information System (INIS)

Rahe, E.P.

1985-01-01

Based on current regulations, FEMA approves each site-specific plan of state and local governments for each power reactor site after 1) formal review offsite preparedness, 2) holding a public meeting at which the preparedness status has been reviewed, and 3) a satisfactory joint exercise has been conducted with both utility and local participation. Annually, each state, within any position of the 10-mile emergency planning zone, must conduct a joint exercise with the utility to demonstrate its preparedness for a nuclear accident. While it is unlikely that these extreme measures will be needed as a result of an accident at a nuclear power station, the fact that these plans have been well thought out and implemented have already proven their benefit to society. The preparedness for a nuclear accident can be of great advantage in other types of emergencies. For example, on December 11, 1982, a non-nuclear chemical storage tank exploded at a Union Carbide plant in Louisiana shortly after midnight. More than 20,000 people were evacuated from their homes. They were evacuated under the emergency response plan formulated for use in the event of a nuclear accident at the nearby Waterford Nuclear plants. Clearly, this illustrates how a plan conceived for one purpose is appropriate to handle other types of accidents that occur in a modern industrial society

Fuel storage tanks at FAA facilities : Order 1050.15A : executive summary.

Science.gov (United States)

1997-04-30

The Federal Aviation Administration (FAA) has over 4,000 fuel storage tanks (FST) in its inventory. Most of these FSTs are underground storage tanks (UST) that contain fuel for emergency backup generators providing secondary power to air navigational...

A Review of State Public Health Emergency Declarations in Peru: 2014-2016.

Science.gov (United States)

Bambarén, Celso; Alatrista, Maria Del Socorro

2018-04-01

Peru has different legal mechanisms of emergency, one of which is the Public Health Emergency that is applicable when: there is high-risk for, or the existence of an outbreak, epidemic, or pandemic; the occurrence of cases of a disease classified as eliminated or eradicated; the occurrence of emerging or re-emerging infectious diseases with high epidemic potential; the occurrence of rapid disseminated epidemics that simultaneously affect more than one department; as well as the existence of an event that affects the continuity of health services. From July 2014 to December 2016, 23 Public Health Emergencies were declared, out of which 57% were in the high-risk or existence of epidemics, 30% were due to some natural or anthropic events that generate a sudden decrease in the operative capacity of health services, and 13% were due to the existence of a rapid spreading epidemic that could affect more than one department in the country. The risk or occurrence of epidemiological outbreaks, mainly of Dengue, was the main cause of emergency declaration. One-hundred and forty million US dollars were allocated to implement the action plans that were part of the declaration, of which 72% was used to keep the operational capacity of health services and 28% to vector and epidemiological control measures. Bambarén C , Alatrista MdS . A review of state public health emergency declarations in Peru: 2014-2016. Prehosp Disaster Med. 2018;33(2):197-200.

An emergency call system for patients in locked-in state using an SSVEP-based brain switch.

Science.gov (United States)

Lim, Jeong-Hwan; Kim, Yong-Wook; Lee, Jun-Hak; An, Kwang-Ok; Hwang, Han-Jeong; Cha, Ho-Seung; Han, Chang-Hee; Im, Chang-Hwan

2017-11-01

Patients in a locked-in state (LIS) due to severe neurological disorders such as amyotrophic lateral sclerosis (ALS) require seamless emergency care by their caregivers or guardians. However, it is a difficult job for the guardians to continuously monitor the patients' state, especially when direct communication is not possible. In the present study, we developed an emergency call system for such patients using a steady-state visual evoked potential (SSVEP)-based brain switch. Although there have been previous studies to implement SSVEP-based brain switch system, they have not been applied to patients in LIS, and thus their clinical value has not been validated. In this study, we verified whether the SSVEP-based brain switch system can be practically used as an emergency call system for patients in LIS. The brain switch used for our system adopted a chromatic visual stimulus, which proved to be visually less stimulating than conventional checkerboard-type stimuli but could generate SSVEP responses strong enough to be used for brain-computer interface (BCI) applications. To verify the feasibility of our emergency call system, 14 healthy participants and 3 patients with severe ALS took part in online experiments. All three ALS patients successfully called their guardians to their bedsides in about 6.56 seconds. Furthermore, additional experiments with one of these patients demonstrated that our emergency call system maintains fairly good performance even up to 4 weeks after the first experiment without renewing initial calibration data. Our results suggest that our SSVEP-based emergency call system might be successfully used in practical scenarios. © 2017 Society for Psychophysiological Research.

Responding to the deaf in disasters: establishing the need for systematic training for state-level emergency management agencies and community organizations

Science.gov (United States)

2013-01-01

Background Deaf and hard-of-hearing (Deaf/HH) individuals have been underserved before and during emergencies. This paper will assess Deaf/HH related emergency preparedness training needs for state emergency management agencies and deaf-serving community-based organizations (CBOs). Methods Four approaches were used: 1) a literature review; 2) results from 50 key informant (KI) interviews from state and territorial-level emergency management and public health agencies; 3) results from 14 KI interviews with deaf-serving CBOs in the San Francisco Bay Area; and 4) a pilot program evaluation of an emergency responder training serving the Deaf/HH in one urban community. Results Results from literature review and state and territorial level KIs indicate that there is a substantive gap in emergency preparedness training on serving Deaf/HH provided by state agencies. In addition, local KI interviews with 14 deaf-serving CBOs found gaps in training within deaf-serving CBOs. These gaps have implications for preparing for and responding to all-hazards emergencies including weather-related or earthquake-related natural disasters, terrorist attacks, and nuclear-chemical disasters. Conclusion Emergency preparedness trainings specific to responding to or promoting preparedness of the Deaf/HH is rare, even for state agency personnel, and frequently lack standardization, evaluation, or institutionalization in emergency management infrastructure. This has significant policy and research implications. Similarly, CBOs are not adequately trained to serve the needs of their constituents. PMID:23497178

The World Health Organization Global Health Emergency Workforce: What Role Will the United States Play?

Science.gov (United States)

Burkle, Frederick M

2016-08-01

During the May 2016 World Health Assembly of 194 member states, the World Health Organization (WHO) announced the process of developing and launching emergency medical teams as a critical component of the global health workforce concept. Over 64 countries have either launched or are in the development stages of vetting accredited teams, both international and national, to provide surge support to national health systems through WHO Regional Organizations and the delivery of emergency clinical care to sudden-onset disasters and outbreak-affected populations. To date, the United States has not yet committed to adopting the emergency medical team concept in funding and registering an international field hospital level team. This article discusses future options available for health-related nongovernmental organizations and the required educational and training requirements for health care provider accreditation. (Disaster Med Public Health Preparedness. 2016;10:531-535).

The emerging chemistry of sodium ion batteries for electrochemical energy storage.

Science.gov (United States)

Kundu, Dipan; Talaie, Elahe; Duffort, Victor; Nazar, Linda F

2015-03-09

Energy storage technology has received significant attention for portable electronic devices, electric vehicle propulsion, bulk electricity storage at power stations, and load leveling of renewable sources, such as solar energy and wind power. Lithium ion batteries have dominated most of the first two applications. For the last two cases, however, moving beyond lithium batteries to the element that lies below-sodium-is a sensible step that offers sustainability and cost-effectiveness. This requires an evaluation of the science underpinning these devices, including the discovery of new materials, their electrochemistry, and an increased understanding of ion mobility based on computational methods. The Review considers some of the current scientific issues underpinning sodium ion batteries. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Transportation over long distance and thermal energy storage, coupling with energetic valuation processes from waste. State of art. Extended abstract

International Nuclear Information System (INIS)

Megret, O.; Bequet, L.; Manificat, A.; Weber, C.

2011-12-01

This study aims, on one hand, to realize a state of art about over long distance transport and heat energy storage and, on the other hand, to examine their coupling with waste valuation systems. After reminding the adequate context of development with those solutions and too showing the importance of the stake linked to the current work, we first expose the introductive elements in terms of storage and heat energy transport. The second chapter deals with the description of some materials, equipment and systems concerning heat storage energy. Afterward, the over long distance heat transport systems are detailed in the third chapter. In the fourth chapter, it is about waste valuation techniques and heat energy potentials users. The fifth chapter sums up the different techniques of storage and heat transport that are applicable to waste field according to the appropriate sector. Finally, the sixth chapter goes about 3 case-works in 3 fields: housing/commercial, industrial laundry and high temperature industry (steel industry). The purpose is to determine the implementation feasibility of the different techniques of storage and waste heat transport. (authors)

Moderate Temperature Dense Phase Hydrogen Storage Materials within the US Department of Energy (DOE H2 Storage Program: Trends toward Future Development

Directory of Open Access Journals (Sweden)

Scott McWhorter

2012-05-01

Full Text Available Hydrogen has many positive attributes that make it a viable choice to augment the current portfolio of combustion-based fuels, especially when considering reducing pollution and greenhouse gas (GHG emissions. However, conventional methods of storing H2 via high-pressure or liquid H2 do not provide long-term economic solutions for many applications, especially emerging applications such as man-portable or stationary power. Hydrogen storage in materials has the potential to meet the performance and cost demands, however, further developments are needed to address the thermodynamics and kinetics of H2 uptake and release. Therefore, the US Department of Energy (DOE initiated three Centers of Excellence focused on developing H2 storage materials that could meet the stringent performance requirements for on-board vehicular applications. In this review, we have summarized the developments that occurred as a result of the efforts of the Metal Hydride and Chemical Hydrogen Storage Centers of Excellence on materials that bind hydrogen through ionic and covalent linkages and thus could provide moderate temperature, dense phase H2 storage options for a wide range of emerging Proton Exchange Membrane Fuel Cell (PEM FC applications.

Spent fuel heatup following loss of water during storage

International Nuclear Information System (INIS)

Benjamin, A.S.; McCloskey, D.J.; Powers, D.A.; Dupree, S.A.

1979-03-01

An analysis of spent fuel heatup following a hypothetical accident involving drainage of the storage pool is presented. Computations based upon a new computer code called SFUEL have been performed to assess the effect of decay time, fuel element design, storage rack design, packing density, room ventilation, drainage level, and other variables on the heatup characteristics of the spent fuel and to predict the conditions under which clad failure will occur. Possible storage pool design modifications and/or onsite emergency action have also been considered

When states regulate emergency contraceptives like abortion, what should guide disclosure?

Science.gov (United States)

Flynn, Cameron O'Brien; Wilson, Robin Fretwell

2015-01-01

State laws dictating "informed consent" about surgical and chemical abortions sometimes ensnare emergency contraceptives (EC), as the science surrounding EC shows. Courts evaluating mandated disclosures gravitate to professional norms rather than the information most women would value: basic factual information about EC so that they can decide for themselves whether to use these drugs. © 2015 American Society of Law, Medicine & Ethics, Inc.

Develop an piezoelectric sensing based on SHM system for nuclear dry storage system

Science.gov (United States)

Ma, Linlin; Lin, Bin; Sun, Xiaoyi; Howden, Stephen; Yu, Lingyu

2016-04-01

In US, there are over 1482 dry cask storage system (DCSS) in use storing 57,807 fuel assemblies. Monitoring is necessary to determine and predict the degradation state of the systems and structures. Therefore, nondestructive monitoring is in urgent need and must be integrated into the fuel cycle to quantify the "state of health" for the safe operation of nuclear power plants (NPP) and radioactive waste storage systems (RWSS). Innovative approaches are desired to evaluate the degradation and damage of used fuel containers under extended storage. Structural health monitoring (SHM) is an emerging technology that uses in-situ sensory system to perform rapid nondestructive detection of structural damage as well as long-term integrity monitoring. It has been extensively studied in aerospace engineering over the past two decades. This paper presents the development of a SHM and damage detection methodology based on piezoelectric sensors technologies for steel canisters in nuclear dry cask storage system. Durability and survivability of piezoelectric sensors under temperature influence are first investigated in this work by evaluating sensor capacitance and electromechanical admittance. Toward damage detection, the PES are configured in pitch catch setup to transmit and receive guided waves in plate-like structures. When the inspected structure has damage such as a surface defect, the incident guided waves will be reflected or scattered resulting in changes in the wave measurements. Sparse array algorithm is developed and implemented using multiple sensors to image the structure. The sparse array algorithm is also evaluated at elevated temperature.

77 FR 8860 - Pesticide Emergency Exemptions; Agency Decisions and State and Federal Agency Crisis Declarations

Science.gov (United States)

2012-02-15

...; Agency Decisions and State and Federal Agency Crisis Declarations AGENCY: Environmental Protection Agency... agencies. The emergency exemptions may take the following form: Crisis, public health, quarantine, or.... These are rarely requested. 3. A ``crisis exemption'' is initiated by a State or Federal agency (and is...

Saline Cavern Adiabatic Compressed Air Energy Storage Using Sand as Heat Storage Material

Directory of Open Access Journals (Sweden)

Martin Haemmerle

2017-03-01

Full Text Available Adiabatic compressed air energy storage systems offer large energy storage capacities and power outputs beyond 100MWel. Salt production in Austria produces large caverns which are able to hold pressure up to 100 bar, thus providing low cost pressurized air storage reservoirs for adiabatic compressed air energy storage plants. In this paper the results of a feasibility study is presented, which was financed by the Austrian Research Promotion Agency, with the objective to determine the adiabatic compressed air energy storage potential of Austria’s salt caverns. The study contains designs of realisable plants with capacities between 10 and 50 MWel, applying a high temperature energy storage system currently developed at the Institute for Energy Systems and Thermodynamics in Vienna. It could be shown that the overall storage potential of Austria’s salt caverns exceeds a total of 4GWhel in the year 2030 and, assuming an adequate performance of the heat exchanger, that a 10MWel adiabatic compressed air energy storage plant in Upper Austria is currently feasible using state of the art thermal turbomachinery which is able to provide a compressor discharge temperature of 400 °C.

Dry storage systems using casks for long term storage in an AFR and repository

International Nuclear Information System (INIS)

Einfeld, K.; Popp, F.W.

1986-01-01

In conclusion it can be stated that two basic routes with respect to spent fuel storage casks are feasible. One is the Multiple Transport Cask, which with certain modifications can be upgraded to meet the criteria for intermediate storage. Its status is characterized by the licensing of several types of Castor Casks for an intermediate storage period of 30 years in the AFR Storage Facility of DWK at Gorleben in the FRG. The other one is the Final Disposal (Repository) Cask, which can be made suitable for long term storage before a final decision with respect to a repository application is taken. The licensing procedure for a Pilot Conditioning Facility with the Pollux Cask System as reference case will be initiated by DWK in the near future. Under the assumption that in addition to the present Multiple Transport/Storage Casks a license for a Final disposal Cask with respect to long term storage is available, the relative merits of different cask storage systems would have to be evaluated

Preliminary assessment of alternative dry storage methods for the storage of commercial spent nuclear fuel

International Nuclear Information System (INIS)

1981-11-01

This report presents the results of an assessment of the (1) state of technology, (2) licensability, (3) implementation schedule, and (4) costs of alternative dry methods for storage of spent fuel at a reactor location when used to supplement reactor pool storage facilities. The methods of storage that were considered included storage in casks, drywells, concrete silos and air-cooled vaults. The impact of disassembly of spent fuel and storage of consolidated fuel rods was also determined. The economic assessments were made based on the current projected storage requirements of Virginia Electric and Power Company's Surry Station for the period 1985 to 2009, which has two operating pressurized water reactors (824 MWe each). It was estimated that the unit cost for storage of spent fuel in casks would amount to $117/kgU and that such costs for storage in drywells would amount to $137/kgU. However, based on the overall assessment it was concluded both storage methods were equal in merit. Modular methods of storage were generally found to be more economic than those requiring all or most of the facilities to be constructed prior to commencement of storage operations

Knowledge-based emergency planning for storage tank farms

Czech Academy of Sciences Publication Activity Database

Nevrlý, Václav; Bitala, P.; Nevrlá, P.; Střižík, Michal

2008-01-01

Roč. 10, č. 1 (2008), s. 10-15 ISSN 1335-4205 Institutional research plan: CEZ:AV0Z20760514 Keywords : emergency * preparedness * modeling tank fire boilover Subject RIV: AQ - Safety, Health Protection, Human - Machine http://www.utc.sk/komunikacie

AnalyzeThis: An Analysis Workflow-Aware Storage System

Energy Technology Data Exchange (ETDEWEB)

Sim, Hyogi [ORNL; Kim, Youngjae [ORNL; Vazhkudai, Sudharshan S [ORNL; Tiwari, Devesh [ORNL; Anwar, Ali [Virginia Tech, Blacksburg, VA; Butt, Ali R [Virginia Tech, Blacksburg, VA; Ramakrishnan, Lavanya [Lawrence Berkeley National Laboratory (LBNL)

2015-01-01

The need for novel data analysis is urgent in the face of a data deluge from modern applications. Traditional approaches to data analysis incur significant data movement costs, moving data back and forth between the storage system and the processor. Emerging Active Flash devices enable processing on the flash, where the data already resides. An array of such Active Flash devices allows us to revisit how analysis workflows interact with storage systems. By seamlessly blending together the flash storage and data analysis, we create an analysis workflow-aware storage system, AnalyzeThis. Our guiding principle is that analysis-awareness be deeply ingrained in each and every layer of the storage, elevating data analyses as first-class citizens, and transforming AnalyzeThis into a potent analytics-aware appliance. We implement the AnalyzeThis storage system atop an emulation platform of the Active Flash array. Our results indicate that AnalyzeThis is viable, expediting workflow execution and minimizing data movement.

Gas storage facilities. Investigation of their social value

International Nuclear Information System (INIS)

1997-02-01

The socio-economic factors resulting from location of gas storage facilities are evaluated. Various alternatives to the existing projects are estimated, for instance 11 new pipelines, in some cases combined with new production capacity, LNG facilities, differentiated tariffs, reconstruction of decentralized heat/power plants etc. Theoretical considerations and models, among others involving gas storage abroad, are presented. Seasonal storage, emergency storage, storage controlled by economic optimization (profitable purchases, sales at highest market) are described for various types of facilities, like aquifers, caverns and LNG-stores. Natural gas supplies in Europe, infrastructure and resources are compared to the Danish conditions. Sensitivity of the Danish heating market for natural gas consumption is investigated. Reduction in energy use for space heating by 2005 will change the needs of storage of 740 Mm 3 gas to 650 Mm 3 . Extra consumption by the decentralized power/heat plants is not accounted for in this estimation. Dynamic models of the future gas consumption are based on the EU 'European Energy 2020'. (EG)

Accident knowledge and emergency management

Energy Technology Data Exchange (ETDEWEB)

Rasmussen, B; Groenberg, C D

1997-03-01

The report contains an overall frame for transformation of knowledge and experience from risk analysis to emergency education. An accident model has been developed to describe the emergency situation. A key concept of this model is uncontrolled flow of energy (UFOE), essential elements are the state, location and movement of the energy (and mass). A UFOE can be considered as the driving force of an accident, e.g., an explosion, a fire, a release of heavy gases. As long as the energy is confined, i.e. the location and movement of the energy are under control, the situation is safe, but loss of confinement will create a hazardous situation that may develop into an accident. A domain model has been developed for representing accident and emergency scenarios occurring in society. The domain model uses three main categories: status, context and objectives. A domain is a group of activities with allied goals and elements and ten specific domains have been investigated: process plant, storage, nuclear power plant, energy distribution, marine transport of goods, marine transport of people, aviation, transport by road, transport by rail and natural disasters. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain. (au) 41 tabs., 8 ills.; 79 refs.

Accident knowledge and emergency management

International Nuclear Information System (INIS)

Rasmussen, B.; Groenberg, C.D.

1997-03-01

The report contains an overall frame for transformation of knowledge and experience from risk analysis to emergency education. An accident model has been developed to describe the emergency situation. A key concept of this model is uncontrolled flow of energy (UFOE), essential elements are the state, location and movement of the energy (and mass). A UFOE can be considered as the driving force of an accident, e.g., an explosion, a fire, a release of heavy gases. As long as the energy is confined, i.e. the location and movement of the energy are under control, the situation is safe, but loss of confinement will create a hazardous situation that may develop into an accident. A domain model has been developed for representing accident and emergency scenarios occurring in society. The domain model uses three main categories: status, context and objectives. A domain is a group of activities with allied goals and elements and ten specific domains have been investigated: process plant, storage, nuclear power plant, energy distribution, marine transport of goods, marine transport of people, aviation, transport by road, transport by rail and natural disasters. Totally 25 accident cases were consulted and information was extracted for filling into the schematic representations with two to four cases pr. specific domain. (au) 41 tabs., 8 ills.; 79 refs

An All-vanadium Continuous-flow Photoelectrochemical Cell for Extending State-of-charge in Solar Energy Storage.

Science.gov (United States)

Wei, Zi; Shen, Yi; Liu, Dong; Liu, Fuqiang

2017-04-04

Greater levels of solar energy storage provide an effective solution to the inherent nature of intermittency, and can substantially improve reliability, availability, and quality of the renewable energy source. Here we demonstrated an all-vanadium (all-V) continuous-flow photoelectrochemical storage cell (PESC) to achieve efficient and high-capacity storage of solar energy, through improving both photocurrent and photocharging depth. It was discovered that forced convective flow of electrolytes greatly enhanced the photocurrent by 5 times comparing to that with stagnant electrolytes. Electrochemical impedance spectroscopy (EIS) study revealed a great reduction of charge transfer resistance with forced convective flow of electrolytes as a result of better mass transport at U-turns of the tortuous serpentine flow channel of the cell. Taking advantage of the improved photocurrent and diminished charge transfer resistance, the all-V continuous-flow PESC was capable of producing ~20% gain in state of charge (SOC) under AM1.5 illumination for ca. 1.7 hours without any external bias. This gain of SOC was surprisingly three times more than that with stagnant electrolytes during a 25-hour period of photocharge.

Emerging concepts in liver graft preservation

Science.gov (United States)

Bejaoui, Mohamed; Pantazi, Eirini; Folch-Puy, Emma; Baptista, Pedro M; García-Gil, Agustín; Adam, René; Roselló-Catafau, Joan

2015-01-01

The urgent need to expand the donor pool in order to attend to the growing demand for liver transplantation has obliged physicians to consider the use of suboptimal liver grafts and also to redefine the preservation strategies. This review examines the different methods of liver graft preservation, focusing on the latest advances in both static cold storage and machine perfusion (MP). The new strategies for static cold storage are mainly designed to increase the fatty liver graft preservation via the supplementation of commercial organ preservation solutions with additives. In this paper we stress the importance of carrying out effective graft washout after static cold preservation, and present a detailed discussion of the future perspectives for dynamic graft preservation using MP at different temperatures (hypothermia at 4 °C, normothermia at 37 °C and subnormothermia at 20 °C-25 °C). Finally, we highlight some emerging applications of regenerative medicine in liver graft preservation. In conclusion, this review discusses the “state of the art” and future perspectives in static and dynamic liver graft preservation in order to improve graft viability. PMID:25593455

Cooperative Optimal Operation of Wind-Storage Facilities

DEFF Research Database (Denmark)

Farashbashi-Astaneh, Seyed-Mostafa; Hu, Weihao; Chen, Zhe

2014-01-01

investment cost. We suggest benefitting the storage unit as a regulation service provider beside its normal operation for mitigating wind power imbalances. This idea comes from the fact that storage units have a fast ramping capability which is necessary to meet close to real-time regulation needs......As the penetration of wind power increases in power systems across the world, wind forecast errors become an emerging problem. Storage units are reliable tools to be used in cooperation with wind farms to mitigate imbalance penalties. Nevertheless they are not still economically viable due to huge....... In this paper a framework is proposed to formulate the optimal design of storage unit’s operation under different scenarios. These scenarios include whether the wind farm is actually generating more or less than the scheduled level submitted to day-ahead market. The results emphasize that the deployment...

Current state of WWER SNF storage in Russia and the perspectives

International Nuclear Information System (INIS)

Anisimov, O.; Kozlov, Y.; Razmashkin, N.; Safutin, V.; Tikhonov, N.

2006-01-01

In the Russian Federation WWER-440 Spent Nuclear Fuel (SNF) is reprocessed at RT-1 plant near Cheliabinsk. WWER-1000 SNF is supposed to be reprocessed at RT-2 plant, which will be built about 2020. The information on the capacity and fill up level of the at-reactor pools at NPP with WWER reactors considering its modification up to May 2005 is given. The regulatory requirements to all SNF 'wet' storage facilities; the principle design and engineering solutions as well as the complex of measures for radiation safety and the environmental protection of spent fuel storage are presented. WWER-440 SNF management, WWER-1000 SNF management and dry storage of WWER-1000 SNF are discussed. In the conclusion it is noted than neither Russia, nor any other country have the experience of construction of vault-type 'dry' storage facilities of such a capacity to store WWER-1000 SNF (9000 tU). The experience and design solutions approved earlier in creation of other dangerous facilities were used. The calculations were based on conservative assumptions allowing with a large assurance to guarantee the nuclear and radiation safety and the environmental protection. At present, a program is developed for scientific-technical support of the dry storage facility design and operation, aimed at the studies whose results will allow to optimize the taken technical decisions, simplify SNF management technology and, possibly, to reduce the cost of the storage facility itself

Retrospective on the construction and practice of a state-level emergency medical rescue team.

Science.gov (United States)

Lei, Zhang; Haitao, Guo; Xin, Wang; Yundou, Wang

2014-10-01

For the past few years, disasters like earthquakes, landslides, mudslides, tsunamis, and traffic accidents have occurred with an ever-growing frequency, coverage, and intensity greatly beyond the expectation of the public. In order to respond effectively to disasters and to reduce casualties and property damage, countries around the world have invested more efforts in the theoretical study of emergency medicine and the construction of emergency medical rescue forces. Consequently, emergency medical rescue teams of all scales and types have come into being and have played significant roles in disaster response work. As the only state-level emergency medical rescue force from the Chinese People's Armed Police Forces, the force described here has developed, through continuous learning and practice, a characteristic mode in terms of grouping methods, equipment system construction, and training.

Hydrogen storage on carbon materials: state of the art

International Nuclear Information System (INIS)

D Cazorla Amoros; D Lozano Castello; F Suarez Garcia; M Jorda Beneytoa; A Linares Solano

2005-01-01

Full text of publication follows: From an economic point of view, the use of hydrogen could revolutionize energy and transportation markets, what generates a great interest towards this fuel. This interest has led to the so-called 'hydrogen economy'. However, the main drawback for the use of hydrogen as transportation fuel or in power generation is the storage of this gas to reach a sufficiently high energy density, which could fit to the goals of the DOE hydrogen plan to automotive fuel cell systems i.e. 62 kg H 2 /m 3 ). [1] A review of both experimental and theoretical studies published on the field of hydrogen storage on carbon materials (nano-tubes, nano-fibers and porous carbons) shows a large dispersion in hydrogen storage values. Although some values have exceeded by far the goals of the DOE [2], other authors assure that it is not feasible the use of carbonaceous materials as hydrogen storage systems [3]. The first objective of this presentation is to analyze some possible reasons of the large values dispersion. The discrepancy among the different theoretical studies can be due to non-realist models or to unsuitable approaches. High results dispersion and low reproducibility of experimental measurements are mostly consequence of experimental errors (as for example, the use of small amount of sample) and/or to the use of non-purified materials. In fact, the main disadvantage of the use of novel carbon materials, such as nano-tubes and nano-fibers, is the unavailability of large amounts of those materials with sufficient purity in order to get both feasible measurements in the laboratory, an their subsequent use in large scale. In addition to these possible reasons of errors, for a better understanding of the large results dispersion, the different mechanism of hydrogen storage, such as hydride formation, hydrogen transfer and hydrogen adsorption will be also reviewed in this presentation. Differently to nano-tubes and nano-fibers, activated carbons are

Hydrogen storage on carbon materials: state of the art

International Nuclear Information System (INIS)

Cazorla-Amoros, D.; Lozano-Castello, D.; Suarez-Garcia, F.; Jorda-Beneyto, M.; Linares-Solano, A.

2005-01-01

Complete text of publication follows: From an economic point of view, the use of hydrogen could revolutionize energy and transportation markets, what generates a great interest towards this fuel. This interest has led to the so-called 'hydrogen economy'. However, the main drawback for the use of hydrogen as transportation fuel or in power generation is the storage of this gas to reach a sufficiently high energy density, which could fit to the goals of the DOE hydrogen plan to automotive fuel cell systems i.e. 62 kg H 2 /m 3 ) [1]. A review of both experimental and theoretical studies published on the field of hydrogen storage on carbon materials (nano-tubes, nano-fibers and porous cartons) shows a large dispersion in hydrogen storage values. Although some values have exceeded by far the goals of the DOE [2], other authors assure that it is not feasible the use of carbonaceous materials as hydrogen storage systems [3]. The first objective of this presentation is to analyze some possible reasons of the large values dispersion. The discrepancy among the different theoretical studies can be due to non-realist models or to unsuitable approaches. High results dispersion and low reproducibility of experimental measurements are mostly consequence of experimental errors (as for example, the use of small amount of sample) and/or to the use of non-purified materials. In fact, the main disadvantage of the use of novel carbon materials, such as nano-tubes and nano-fibers, is the unavailability of large amounts of those materials with sufficient purity in order to get both feasible measurements in the laboratory, an their subsequent use in large scale. In addition to these possible reasons of errors, for a better understanding of the large results dispersion, the different mechanism of hydrogen storage, such as hydride formation, hydrogen transfer and hydrogen adsorption will be also reviewed in this presentation. Differently to nano-tubes and nano-fibers, activated carbons are

Plutonium Finishing Plant Treatment and Storage Unit Dangerous Waste Training Plan

International Nuclear Information System (INIS)

ENTROP, G.E.

2000-01-01

The training program for personnel performing waste management duties pertaining to the Plutonium Finishing Plant (PFP) Treatment and Storage Unit is governed by the general requirements established in the Plutonium Finishing Plant Dangerous Waste Training Plan (PFP DWTP). The PFP Treatment and Storage Unit DWTP presented below incorporates all of the components of the PFP DWTP by reference. The discussion presented in this document identifies aspects of the training program specific to the PFP Treatment and Storage Unit. The training program includes specifications for personnel instruction through both classroom and on-the-job training. Training is developed specific to waste management duties. Hanford Facility personnel directly involved with the PFP Treatment and Storage Unit will receive training to container management practices, spill response, and emergency response. These will include, for example, training in the cementation process and training pertaining to applicable elements of WAC 173-303-330(1)(d). Applicable elements from WAC 173-303-330(1)(d) for the PFP Treatment and Storage Unit include: procedures for inspecting, repairing, and replacing facility emergency and monitoring equipment; communications and alarm systems; response to fires or explosions; and shutdown of operations

LLRW storage: Perspectives from the Northeast

International Nuclear Information System (INIS)

Tammemagi, H.Y.

1990-01-01

It is very difficult to predict development in the low-level radioactive waste (LLRW) scene for the coming decade because of the unsettled climate at present. However, it is becoming increasingly clear that storage will play an important role in the LLRW management equation. It is a vital and integral component of meeting the intent of the federal LLW Acts and all states and compacts, as well as individual generators, should be factoring it into their management strategies. The reason is that the mandated milestones are not going to be met. Very few states or compacts will comply with either the 1993 or 1996 deadlines. New York provides a good example of how a dedicated, conscientious and well-funded effort to locate a site for disposal facility was thwarted by public pressure, and progress in New York will be greatly delayed. Storage is an inevitable requirement. As will be shown, the technology for LLRW storage is not complicated. There are proven, safe and cost efficient methods available. However, they must be implemented with care and political, licensing and public interaction processes must be included. This all requires time. It is important that storage plans be developed early and in parallel with disposal plans and receive the same degree of intellectual effort and commitment. In this presentation the author describes some of the storage technologies that are being successfully used today. The paper discusses some of the alternative methods by which these technologies might be implemented and reviews the storage strategies that are being used by some of the states in the Northeast

Defect States Emerging from a Non-Hermitian Flatband of Photonic Zero Modes

Science.gov (United States)

Qi, Bingkun; Zhang, Lingxuan; Ge, Li

2018-03-01

We show the existence of a flatband consisting of photonic zero modes in a gain and loss modulated lattice system as a result of the underlying non-Hermitian particle-hole symmetry. This general finding explains the previous observation in parity-time symmetric systems where non-Hermitian particle-hole symmetry is hidden. We further discuss the defect states in these systems, whose emergence can be viewed as an unconventional alignment of a pseudospin under the influence of a complex-valued pseudomagnetic field. These defect states also behave as a chain with two types of links, one rigid in a unit cell and one soft between unit cells, as the defect states become increasingly localized with the gain and loss strength.

Logic operations and data storage using vortex magnetization states in mesoscopic permalloy rings, and optical readout

Energy Technology Data Exchange (ETDEWEB)

Bowden, S R; Gibson, U J, E-mail: u.gibson@dartmouth.ed [Thayer School of Engineering, Dartmouth College, Hanover, NH 03755-8000 (United States)

2010-01-01

Optical coatings applied to one-half of thin film magnetic rings allow real-time readout of the chirality of the vortex state of micro- and nanomagnetic structures by breaking the symmetry of the optical signal. We use this technique to demonstrate data storage, operation of a NOT gate that uses exchange interactions between slightly overlapping rings, and to investigate the use of chains of rings as connecting wires for linking gates.

Points of Influence for Lethal Means Counseling and Safe Gun Storage Practices.

Science.gov (United States)

Runyan, Carol W; Brooks-Russell, Ashley; Betz, Marian E

2018-06-07

Counseling about reducing access to lethal means of suicide, especially firearms, is a recommended practice in emergency departments (EDs) but does not occur routinely. Understanding influencers of decisions makers in health care (ED nurse leaders, mental health providers) and temporary firearm storage (law enforcement and gun retailers) could enhance practice. We surveyed these 4 groups in the 8-state region of the Mountain West. For ED nurse leaders (n = 190), hospital legal, risk management, and quality improvement representatives, and the ED nursing director were most often cited as influential, whereas mental health providers (n = 67) cited their own team. Law enforcement officials (n = 448) identified the overall community and leaders of mental health or general health organizations as influential. Firearm retailers (n = 95) cited local law enforcement and national firearm organizations. Advocacy from influential groups may encourage efforts to provide lethal means counseling and temporary off-site storage of firearms for suicide prevention.

Solar applications of thermal energy storage. Final report

Energy Technology Data Exchange (ETDEWEB)

Lee, C.; Taylor, L.; DeVries, J.; Heibein, S.

1979-01-01

A technology assessment is presented on solar energy systems which use thermal energy storage. The study includes characterization of the current state-of-the-art of thermal energy storage, an assessment of the energy storage needs of solar energy systems, and the synthesis of this information into preliminary design criteria which would form the basis for detailed designs of thermal energy storage. (MHR)

Energy emergency information needs. Adequacy of data dissemination: state, industry, and government views

Energy Technology Data Exchange (ETDEWEB)

1985-12-01

This briefing report discusses the extent to which the energy Information Agency (EIA) and the Department of Energy (DOE) are meeting the energy emergency statistical data and information needs of states and industry. Objectives were to obtain information on (1) what data and information are needed by states and industry to allow them to properly meet an oil shortage, whether EIA and DOE are meeting those needs, and what effective steps might be taken to better serve those needs.

Onsite LLW storage at Cook

International Nuclear Information System (INIS)

MacRae, W.T.

1994-01-01

The Donald C. Cook nuclear plant has gained much experience through the onsite storage of low-level radioactive waste. Owned and operated by the Indiana Michigan Power Company, which is owned by American Electric Power, the plant is located in Bridgman, Michigan, on the southeast side of Lake Michigan, about 50 miles from Chicago. In November 1990, waste generators in the state of Michigan were denied access to licensed low-level waste disposal sites because of a lack of progress by the state in developing its own disposal site. Because of this lack, wastes from the Cook plant have been stored onsite for three years. This article covers four issues related to the Cook nuclear plant's experience in the low-level waste storage: storage capacity and waste generation rates, waste form and packages, regulatory issues, and the monitoring of the waste

Emergency planning for industrial hazards

International Nuclear Information System (INIS)

Gow, H.B.F.; Kay, R.W.

1988-01-01

The European Communities have produced a Directive on the Major Accident Hazards of Certain Industrial Activities which sets out standards for the control and mitigation of the hazards presented by sites and storages which contain significant quantities of dangerous substances. An essential element of these controls is the provision of effective on-and off-site emergency plans. This conference explores the considerable research effort which is going on throughout the world in the improvement of systems for emergency planning. Attention was also drawn to areas where difficulties still exist, for example in predicting the consequences of an accident, the complexities of communication problems and the difficulties arising from involvement of the public. The proceedings are in six parts which deal with organizations implementing emergency planning: on- and off-site emergency planning and design; techniques for emergency plans; expenses and auditing of emergency plans; lessons learnt from the emergency management of major accidents; information to the public to and during emergencies. (author)

The subtle attractions of dry vault storage

International Nuclear Information System (INIS)

Ealing, C.J.

1993-01-01

Utilities in the United States of America, Scotland and Hungary have all adopted dry vault technology in their plans for spent fuel storage. This article looks at what makes dry storage an attractive option. (author)

Ionic liquids and their solid-state analogues as materials for energy generation and storage

Science.gov (United States)

Macfarlane, Douglas R.; Forsyth, Maria; Howlett, Patrick C.; Kar, Mega; Passerini, Stefano; Pringle, Jennifer M.; Ohno, Hiroyuki; Watanabe, Masayoshi; Yan, Feng; Zheng, Wenjun; Zhang, Shiguo; Zhang, Jie

2016-02-01

Salts that are liquid at room temperature, now commonly called ionic liquids, have been known for more than 100 years; however, their unique properties have only come to light in the past two decades. In this Review, we examine recent work in which the properties of ionic liquids have enabled important advances to be made in sustainable energy generation and storage. We discuss the use of ionic liquids as media for synthesis of electromaterials, for example, in the preparation of doped carbons, conducting polymers and intercalation electrode materials. Focusing on their intrinsic ionic conductivity, we examine recent reports of ionic liquids used as electrolytes in emerging high-energy-density and low-cost batteries, including Li-ion, Li-O2, Li-S, Na-ion and Al-ion batteries. Similar developments in electrolyte applications in dye-sensitized solar cells, thermo-electrochemical cells, double-layer capacitors and CO2 reduction are also discussed.

Important historical efforts at emergency department categorization in the United States and implications for regionalization.

Science.gov (United States)

Mehrotra, Abhishek; Sklar, David P; Tayal, Vivek S; Kocher, Keith E; Handel, Daniel A; Myles Riner, R

2010-12-01

This article is drawn from a report created for the American College of Emergency Physicians (ACEP) Emergency Department (ED) Categorization Task Force and also reflects the proceedings of a breakout session, "Beyond ED Categorization-Matching Networks to Patient Needs," at the 2010 Academic Emergency Medicine consensus conference, "Beyond Regionalization: Integrated Networks of Emergency Care." The authors describe a brief history of the significant national and state efforts at categorization and suggest reasons why many of these efforts failed to persevere or gain wider implementation. The history of efforts to categorize hospital (and ED) emergency services demonstrates recognition of the potential benefits of categorization, but reflects repeated failures to implement full categorization systems or limited excursions into categorization through licensing of EDs or designation of receiving and referral facilities. An understanding of the history of hospital and ED categorization could better inform current efforts to develop categorization schemes and processes. 2010 by the Society for Academic Emergency Medicine.

Rock cavern storage of spent fuel

Energy Technology Data Exchange (ETDEWEB)

Cho, Won Jin; Kim, Kyung Soo [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of); Kwon, Sang Ki [Inha University, Incheon (Korea, Republic of)

2015-12-15

The rock cavern storage for spent fuel has been assessed to apply in Korea with reviewing the state of the art of the technologies for surface storage and rock cavern storage of spent fuel. The technical feasibility and economic aspects of the rock cavern storage of spent fuel were also analyzed. A considerable area of flat land isolated from the exterior are needed to meet the requirement for the site of the surface storage facilities. It may, however, not be easy to secure such areas in the mountainous region of Korea. Instead, the spent fuel storage facilities constructed in the rock cavern moderate their demands for the suitable site. As a result, the rock cavern storage is a promising alternative for the storage of spent fuel in the aspect of natural and social environments. The rock cavern storage of spent fuel has several advantages compared with the surface storage, and there is no significant difference on the viewpoint of economy between the two alternatives. In addition, no great technical difficulties are present to apply the rock cavern storage technologies to the storage of domestic spent fuel.

Atmospheric release advisory capability pilot project at two nuclear power plants and associated state offices of emergency preparedness. Final report

International Nuclear Information System (INIS)

Rosen, L.C.

1983-01-01

A project to demonstrate the feasibility of utilizing Atmospheric Release Advisory Capability (ARAC) limited service with commercial nuclear power plants and their associated state offices of emergency preparedness is discussed. Preliminary planning, installation and testing of the ARAC site facilities at Indian Point Nucler Power Station, New York State; at New York State Office of Emergency Preparedness, Albany, New York; at Rancho Seco Nuclear Generating Station, California; and at the State of California Office of Emergency Services, Sacramento, California, are summarized. ARAC participation in the Robert E. Ginna nuclear generating plant accident in New York on January 25, 1982, is discussed. The ARAC system is evaluated with emphasis on communications, the suite of models contained within the ARAC system, and the staff. The implications of this project in designing the next-generation ARAC system to service federal and state needs are assessed

Energy storage for sustainable microgrid

CERN Document Server

Gao, David Wenzhong

2015-01-01

Energy Storage for Sustainable Microgrid addresses the issues related to modelling, operation and control, steady-state and dynamic analysis of microgrids with ESS. This book discusses major electricity storage technologies in depth along with their efficiency, lifetime cycles, environmental benefits and capacity, so that readers can envisage which type of storage technology is best for a particular microgrid application. This book offers solutions to numerous difficulties such as choosing the right ESS for the particular microgrid application, proper sizing of ESS for microgrid, as well as

ULTimateCO2 - State of the art report. Dealing with uncertainty associated with long-term CO2 geological storage

International Nuclear Information System (INIS)

2014-01-01

ULTimateCO2, a four-year collaborative project financed by the 7. Framework Programme and coordinated by BRGM, aims to shed more light on the long-term processes associated with the geological storage of CO 2 . ULTimateCO2 unites 12 partners (research institutes, universities, industrialists) and a varied panel of experts (NGOs, national authority representatives, IEAGHG,...). Based on a multidisciplinary approach, and bringing together laboratory experiments, numerical modelling and natural analogue field studies, ULTimateCO2 will increase our understanding of the long-term effects of CO 2 Capture and Storage (CCS) in terms of hydrodynamics, geochemistry, mechanics of the storage formations and their vicinity. The report contains the partners' pooled knowledge and provides a view of the current state-of-the-art for the issues addressed by this project: - The long-term reservoir trapping efficiency (WP3); - The long-term sealing integrity of faulted and fractured cap-rock (WP4); - The near-well leakage characterisation and chemical processes (WP5); - The long-term behavior of stored CO 2 looking at the basin scale (WP2); - Uncertainty assessment (WP6). Each chapter is divided into two sections: (i) a summary which explains in 'simple words' the main issues and objectives of the WP, and (ii) a current state of the art section which provides a more sound review on the specific studied processes. The aim is to provide answers to pertinent questions from a variety of users, particularly project owners, site operators and national authorities, about their exposure to uncertainty downstream of closure of a CO 2 geological storage site

Financial assistance to States and tribes to support emergency preparedness and response and the safe transportation of hazardous shipments

International Nuclear Information System (INIS)

Bradbury, J.A.; Jones, M.L.

1995-01-01

This report identifies and summarizes existing sources of financial assistance to States and Indian tribes in preparing and responding to transportation emergencies and ensuring the safe transportation of hazardous shipments through their jurisdictions. The report has been prepared as an information resource for the US Department of Energy's Office of Environmental Restoration and Waste Management, Office of Transportation, Emergency Management and Analytical Services. The report discusses funding programs administered by the following Federal agencies: Federal Emergency Management Agency; Department of Transportation; the Environmental Protection Agency; and the Department of Energy. Also included is a summary of fees assessed by some States on carriers of hazardous materials and hazardous waste. The discussion of programs is supplemented by an Appendix that provides a series of tables summarizing funding sources and amounts. The report includes several conclusions concerning the level of funding provided to Indian tribes, the relative ranking of funding sources and the variation among States in overall revenues for emergency response and safe transportation

Retention of intermediate polarization states in ferroelectric materials enabling memories for multi-bit data storage

Energy Technology Data Exchange (ETDEWEB)

Zhao, Dong; Asadi, Kamal; Blom, Paul W. M.; Leeuw, Dago M. de, E-mail: deleeuw@mpip-mainz.mpg.de [Max-Planck Institute for Polymer Research, Ackermannweg 10, 55128 Mainz (Germany); Katsouras, Ilias [Holst Centre, High Tech Campus 31, 5656AE Eindhoven (Netherlands); Groen, Wilhelm A. [Holst Centre, High Tech Campus 31, 5656AE Eindhoven (Netherlands); Faculty of Aerospace Engineering, Delft University of Technology, Kluyverweg 1 2629 HS, Delft (Netherlands)

2016-06-06

A homogeneous ferroelectric single crystal exhibits only two remanent polarization states that are stable over time, whereas intermediate, or unsaturated, polarization states are thermodynamically instable. Commonly used ferroelectric materials however, are inhomogeneous polycrystalline thin films or ceramics. To investigate the stability of intermediate polarization states, formed upon incomplete, or partial, switching, we have systematically studied their retention in capacitors comprising two classic ferroelectric materials, viz. random copolymer of vinylidene fluoride with trifluoroethylene, P(VDF-TrFE), and Pb(Zr,Ti)O{sub 3}. Each experiment started from a discharged and electrically depolarized ferroelectric capacitor. Voltage pulses were applied to set the given polarization states. The retention was measured as a function of time at various temperatures. The intermediate polarization states are stable over time, up to the Curie temperature. We argue that the remarkable stability originates from the coexistence of effectively independent domains, with different values of polarization and coercive field. A domain growth model is derived quantitatively describing deterministic switching between the intermediate polarization states. We show that by using well-defined voltage pulses, the polarization can be set to any arbitrary value, allowing arithmetic programming. The feasibility of arithmetic programming along with the inherent stability of intermediate polarization states makes ferroelectric materials ideal candidates for multibit data storage.

Retention of intermediate polarization states in ferroelectric materials enabling memories for multi-bit data storage

Science.gov (United States)

Zhao, Dong; Katsouras, Ilias; Asadi, Kamal; Groen, Wilhelm A.; Blom, Paul W. M.; de Leeuw, Dago M.

2016-06-01

A homogeneous ferroelectric single crystal exhibits only two remanent polarization states that are stable over time, whereas intermediate, or unsaturated, polarization states are thermodynamically instable. Commonly used ferroelectric materials however, are inhomogeneous polycrystalline thin films or ceramics. To investigate the stability of intermediate polarization states, formed upon incomplete, or partial, switching, we have systematically studied their retention in capacitors comprising two classic ferroelectric materials, viz. random copolymer of vinylidene fluoride with trifluoroethylene, P(VDF-TrFE), and Pb(Zr,Ti)O3. Each experiment started from a discharged and electrically depolarized ferroelectric capacitor. Voltage pulses were applied to set the given polarization states. The retention was measured as a function of time at various temperatures. The intermediate polarization states are stable over time, up to the Curie temperature. We argue that the remarkable stability originates from the coexistence of effectively independent domains, with different values of polarization and coercive field. A domain growth model is derived quantitatively describing deterministic switching between the intermediate polarization states. We show that by using well-defined voltage pulses, the polarization can be set to any arbitrary value, allowing arithmetic programming. The feasibility of arithmetic programming along with the inherent stability of intermediate polarization states makes ferroelectric materials ideal candidates for multibit data storage.

Storage of Quantum Variables in Atomic Media

DEFF Research Database (Denmark)

Cviklinski, J.; Ortalo, J.; Josse, V.

2007-01-01

Storage and read-out of non classical states of light is a critical element for quantum information networks. Simultaneous storage of two non-commuting variables carried by light and subsequent read-out is shown to be possible in atomic ensembles. Interaction of light fields with three-level syst......-level systems allows direct mapping the quantum state of light into long lived coherences in the atomic ground state. We show that excess noise linked to atomic transitions can be made negligible. Experimental developments are discussed for atomic vapours and cold atoms....

Energy emergency handbook

Energy Technology Data Exchange (ETDEWEB)

1979-01-01

This Handbook identifies selected state and federal measures available to mitigate the impact of an energy emergency, and provides a comprehensive energy emergency communications directory. In the case of state remedial actions, particular emphasis has been placed on typical implementation procedures and likely impacts. The discussions of federal actions focus on initation and implementation procedures. The directory is designed to facilitate communications of all types (telephone, Telex, TWX, or facsimile) among key energy emergency officials in the federal and state governments.

Stationary flywheel energy storage

Energy Technology Data Exchange (ETDEWEB)

Gilhaus, A; Hau, E; Gassner, G; Huss, G; Schauberger, H

1981-01-01

The aim of this system study is to find out industrial applications of stationary flywheel energy accumulators. The economic value for the consumer and the effects on the power supply grid are investigated. Up to now, stationary flywheel energy accumulators have only been used in a small range. The main reason for thinking of the application in a wider range was the hope that those could be used economically for lowering the maximum output demand of the power supply grid. The possible savings in energy costs, however, proved to be too small for paying back the investment costs. Further benefits are necessary for advantageous application. As to overall economy, compensation of short time maximum power output seems to be more favorable at the power stations. An additional possibility for energy storage by flywheels is given where otherwise lost energy can be used effectively, according to the successful brake energy storage in vehicles. Under this aspect the future use of flywheels in wind-power-plants seems to be promising. Attractive savings of energy can be obtained by introducing modern flywheel technology for emergency power supply units which are employed for instance in telecommunication systems. Especially the application for emergency power supply, in power stations and in combustion with wind energy converters need further investigation.

State legislative developments in radioactive materials transportation, July 1, 1994--June 30, 1995

International Nuclear Information System (INIS)

Goehring, J.B.; Reed, J.B.

1995-08-01

Each year, the National Conference of State Legislatures (NCSL) prepares an update on state developments in radioactive materials transportation. The 1995 Report on State Legislative Developments in Radioactive Materials Transportation describes activities between July 1, 1994 and June 30, 1995. Forty-six bills were introduced and are arranged in this report by state according to their status--enacted, pending or failed. The bills address nuclear materials transportation as well as the broader areas of hazardous materials transportation, waste storage and emergency responsiveness. Also included are state legislative resolutions and Federal Register notices and rule changes related to radioactive waste and hazardous materials transportation that affect states

State legislative developments in radioactive materials transportation, July 1, 1996--June 6, 1997

International Nuclear Information System (INIS)

Kim, M.H.; Reed, J.B.

1997-06-01

The National Conference of State Legislatures (NCSL) prepares an update on state developments in radioactive materials transportation each year. The 1997 Report on State Legislative Developments in Radioactive Materials Transportation describes activities between July 1, 1996 and June 6, 1997. Fifty bills were introduced and are arranged in this report by state according to their status--enacted, pending or failed. The bills address nuclear materials transportation as well as the broader areas of hazardous materials transportation, waste, storage and emergency response. Also summarized are state legislative resolutions and Federal Register notices and rule changes related to radioactive waste and hazardous materials transportation that affect states

Gas storage facilities. Investigation of their social value. Supplement

International Nuclear Information System (INIS)

1997-02-01

The socio-economic factors resulting from location of gas storage facilities are evaluated. Various alternatives to the existing projects are estimated, for instance 11 new pipelines, in some cases combined with new production capacity, LNG facilities, differentiated tariffs, reconstruction of decentralized heat/power plants etc. Theoretical considerations and models, among others involving gas storage abroad, are presented. Seasonal storage, emergency storage, storage controlled by economic optimization (profitable purchases, sales at highest market) are described for various types of facilities, like aquifers, caverns and LNG-stores. Natural gas supplies in Europe, infrastructure and resources are compared to the Danish conditions. Sensitivity of the Danish heating market for natural gas consumption is investigated. Reduction in energy use for space heating by 2005 will change the needs of storage of 740 Mm 3 gas to 650 Mm 3 . Extra consumption by the decentralized power/heat plants is not accounted for in this estimation. Dynamic models of the future gas consumption are based on the EU 'European Energy 2020'. (EG)

All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage

KAUST Repository

Peng, You-Yu

2016-08-01

On-chip energy storage is a rapidly evolving research topic, opening doors for integration of batteries and supercapacitors at microscales on rigid and flexible platforms. Recently, a new class of two-dimensional (2D) transition metal carbides and nitrides (so-called MXenes) has shown great promise in electrochemical energy storage applications. Here, we report the fabrication of all-MXene (Ti3C2Tx) solid-state interdigital microsupercapacitors by employing a solution spray-coating, followed by a photoresist-free direct laser cutting method. Our prototype devices consisted of two layers of Ti3C2Tx with two different flake sizes. The bottom layer was stacked large-size MXene flakes (typical lateral dimensions of 3-6 μm) serving mainly as current collectors. The top layer was made of small-size MXene flakes (~1 μm) with a large number of defects and edges as the electroactive layer responsible for energy storage. Compared to Ti3C2Tx micro-supercapacitors with platinum current collectors, the all-MXene devices exhibited much lower contact resistance, higher capacitances and better rate-capabilities. The areal and volumetric capacitances of ~27 mF cm-2 and ~337 F cm-3, respectively, at a scan rate of 20 mV s-1 were achieved. The devices also demonstrated their excellent cyclic stability, with 100% capacitance retention after 10,000 cycles at a scan rate of 50 mV s-1. This study opens up a plethora of possible designs for high-performance on-chip devices employing different chemistries, flake sizes and morphologies of MXenes and their heterostructures.

All-MXene (2D titanium carbide) solid-state microsupercapacitors for on-chip energy storage

KAUST Repository

Peng, You-Yu; Akuzum, Bilen; Kurra, Narendra; Zhao, Meng-Qiang; Alhabeb, Mohamed; Anasori, Babak; Kumbur, Emin Caglan; Alshareef, Husam N.; Ger, Ming-Der; Gogotsi, Yury

2016-01-01

On-chip energy storage is a rapidly evolving research topic, opening doors for integration of batteries and supercapacitors at microscales on rigid and flexible platforms. Recently, a new class of two-dimensional (2D) transition metal carbides and nitrides (so-called MXenes) has shown great promise in electrochemical energy storage applications. Here, we report the fabrication of all-MXene (Ti3C2Tx) solid-state interdigital microsupercapacitors by employing a solution spray-coating, followed by a photoresist-free direct laser cutting method. Our prototype devices consisted of two layers of Ti3C2Tx with two different flake sizes. The bottom layer was stacked large-size MXene flakes (typical lateral dimensions of 3-6 μm) serving mainly as current collectors. The top layer was made of small-size MXene flakes (~1 μm) with a large number of defects and edges as the electroactive layer responsible for energy storage. Compared to Ti3C2Tx micro-supercapacitors with platinum current collectors, the all-MXene devices exhibited much lower contact resistance, higher capacitances and better rate-capabilities. The areal and volumetric capacitances of ~27 mF cm-2 and ~337 F cm-3, respectively, at a scan rate of 20 mV s-1 were achieved. The devices also demonstrated their excellent cyclic stability, with 100% capacitance retention after 10,000 cycles at a scan rate of 50 mV s-1. This study opens up a plethora of possible designs for high-performance on-chip devices employing different chemistries, flake sizes and morphologies of MXenes and their heterostructures.

Emergency Contraception: Awareness, Perception and Practice among Female Undergraduates in Imo State University, Southeastern Nigeria.

Science.gov (United States)

Ojiyi, Ec; Anolue, Fc; Ejekunle, Sd; Nzewuihe, Ac; Okeudo, C; Dike, Ei; Ejikem, Ce

2014-11-01

Limited knowledge and practice of contraception is a global public health problem. Unintended pregnancies are the primary cause of induced abortion. When safe abortions are not available, as in Nigeria with restricted abortion laws, abortion can contribute significantly to maternal mortality and morbidity. Adequate information on the awareness and the use of emergency contraception is necessary for planning interventions in groups vulnerable to unwanted pregnancy. The aim of the following study is to access the awareness, perception and practice of emergency contraception among female undergraduates in Imo State University, South Eastern Nigeria. A questionnaire based cross-sectional survey using female undergraduates selected randomly from Imo State University, Owerri. A total of 700 students participated in the study. Awareness of emergency contraception was very high (85.1%) (596/700). The awareness was significantly higher amongst students in health related faculties than in the non-health related faculties (P = 0.01). The main sources of information were through friends (43.1%) (317/700) and lectures (22.1%) (192/700). High dose progestogen (postinor-2) was the most commonly known type of emergency contraception (70.8%) (422/596). Only 58.1% (346/596) of those who were aware of emergency contraception approved of their use. The major reasons given by the 41.9% (250/596) who disapproved of their use were religious reasons (50.4%) (126/250) and that they were harmful to health (49.2%) (123/250). Two-third (67%) (46 9/700) of the students were sexually active and only 39.9% (187/469) of them used emergency contraception. High dose progestogen (postinor-2) was again the most commonly used method (70.8%) (422/596). The most common situation in which emergency contraception was used was following unprotected sexual intercourse (45.5%) (85/144). Only 34.6% (206/596) of those who were aware of emergency contraception identified correctly the appropriate time interval

Extended storage of low-level radioactive waste: an update

International Nuclear Information System (INIS)

Siskind, B.

1986-01-01

If a state or regional compact does not have adequate disposal capacity for low-level radioactive waste (LLRW), then extended storage of certain LLRW may be necessary. The Nuclear Regulatory Commission (NRC) has contracted with Brookhaven National Laboratory to address the technical issues of extended storage. The dual objectives of this study are (1) to provide practical technical assessments for NRC to consider in evaluating specific proposals for extended storage and (2) to help ensure adequate consideration by NRC, Agreement States, and licensees of potential problems that may arise from existing or proposed extended storage practices. The circumstances under which extended storage of LLRW would most likely result in problems during or after the extended storage period are considered and possible mitigative measures to minimize these problems are discussed. These potential problem areas include: (1) the degradation of carbon steel and polyethylene containers during storage and the subsequent need for repackaging (resulting in increased occupational exposure), (2) the generation of hazardous gases during storage, and (3) biodegradative processes in LLRW

Extended storage of low-level radioactive waste: an update

Energy Technology Data Exchange (ETDEWEB)

Siskind, B.

1986-01-01

If a state or regional compact does not have adequate disposal capacity for low-level radioactive waste (LLRW), then extended storage of certain LLRW may be necessary. The Nuclear Regulatory Commission (NRC) has contracted with Brookhaven National Laboratory to address the technical issues of extended storage. The dual objectives of this study are (1) to provide practical technical assessments for NRC to consider in evaluating specific proposals for extended storage and (2) to help ensure adequate consideration by NRC, Agreement States, and licensees of potential problems that may arise from existing or proposed extended storage practices. The circumstances under which extended storage of LLRW would most likely result in problems during or after the extended storage period are considered and possible mitigative measures to minimize these problems are discussed. These potential problem areas include: (1) the degradation of carbon steel and polyethylene containers during storage and the subsequent need for repackaging (resulting in increased occupational exposure), (2) the generation of hazardous gases during storage, and (3) biodegradative processes in LLRW.

Status of US storage efforts

International Nuclear Information System (INIS)

Leasburg, R.H.

1984-01-01

Tasks involved in the implementation of the Nuclear Waste Policy Act are discussed. The need for speedy action on applications to deal with spent fuel storage problems is stressed. The problems faced by the Virginia Electric and Power Company, where full core discharge capability at the 1600-megawatt Surry power station is expected to be reached in early 1986, are reviewed. It is pointed out that although the Nuclear Waste Policy Act does not apply in this case, the problems illustrate the situation that may be faced after the Act is implemented. Problems involved in intro-utility transhipments and dry cask storage of spent fuel from Surry, including transportation ordinances at state and local levels and approval for the use of dry casks for storage, are reported. The suggestion that dry casks be used for interim storage and eventual transport to monitored retrievable storage facilities or permanent storage sites is considered. It is pointed out that data from a proposed 3-utility demonstration program of dry cask storage of consolidated fuels and the storage of fuels in air should give information applicable to the timely implementation of the Nuclear Waste Policy Act

Energetic and economic evaluations on hydrogen storage technologies

Energy Technology Data Exchange (ETDEWEB)

Arca, S.; Di Profio, P.; Germani, R. [Perugia Univ., Perugia (Italy). Centro di Eccellenza Materiali Innovativi Nanostrutturati, Dip. Chimica; Savelli, G.; Cotana, F.; Rossi, F.; Amantini, M. [Universita degli Studi di Perugia, Perugia (Italy). Dipartimento di Ingegneria Industriale, Sezione di Fisica Tecnica

2008-07-01

With the development of the hydrogen economy and fuel cell vehicles, a major technological issue has emerged regarding the storage and delivery of large amounts of hydrogen. Several hydrogen storage methodologies are available while other technologies are being developed aside from the classical compression and liquefaction of hydrogen. A novel technology is also in rapid process, which is based on clathrate hydrates of hydrogen. The features and performances of available storage systems were evaluated in an effort to determine the best technology throughout the hydrogen chain. For each of the storage solutions presented, the key parameters were compared. These key parameters included interaction energy between hydrogen and support; real and practical storage capacity; and specific energy consumption. The paper presented the study methods and discussed hydrogen storage technologies using compressed hydrogen; metal hydrides; liquefied hydrogen; carbon nanotubes; ammonia; and gas hydrates. Carbon dioxide emissions were also evaluated for each storage system analyzed. The paper also presented the worst scenario. It was concluded that a technology based on clathrate hydrates of hydrogen, while being far from optimized, was highly competitive with the classical approaches. 21 refs., 9 figs.

PIMS: Memristor-Based Processing-in-Memory-and-Storage.

Energy Technology Data Exchange (ETDEWEB)

Cook, Jeanine

2018-02-01

Continued progress in computing has augmented the quest for higher performance with a new quest for higher energy efficiency. This has led to the re-emergence of Processing-In-Memory (PIM) ar- chitectures that offer higher density and performance with some boost in energy efficiency. Past PIM work either integrated a standard CPU with a conventional DRAM to improve the CPU- memory link, or used a bit-level processor with Single Instruction Multiple Data (SIMD) control, but neither matched the energy consumption of the memory to the computation. We originally proposed to develop a new architecture derived from PIM that more effectively addressed energy efficiency for high performance scientific, data analytics, and neuromorphic applications. We also originally planned to implement a von Neumann architecture with arithmetic/logic units (ALUs) that matched the power consumption of an advanced storage array to maximize energy efficiency. Implementing this architecture in storage was our original idea, since by augmenting storage (in- stead of memory), the system could address both in-memory computation and applications that accessed larger data sets directly from storage, hence Processing-in-Memory-and-Storage (PIMS). However, as our research matured, we discovered several things that changed our original direc- tion, the most important being that a PIM that implements a standard von Neumann-type archi- tecture results in significant energy efficiency improvement, but only about a O(10) performance improvement. In addition to this, the emergence of new memory technologies moved us to propos- ing a non-von Neumann architecture, called Superstrider, implemented not in storage, but in a new DRAM technology called High Bandwidth Memory (HBM). HBM is a stacked DRAM tech- nology that includes a logic layer where an architecture such as Superstrider could potentially be implemented.

Overview of emerging nonvolatile memory technologies.

Science.gov (United States)

Meena, Jagan Singh; Sze, Simon Min; Chand, Umesh; Tseng, Tseung-Yuen

2014-01-01

Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new

Overview of emerging nonvolatile memory technologies

Science.gov (United States)

2014-01-01

Nonvolatile memory technologies in Si-based electronics date back to the 1990s. Ferroelectric field-effect transistor (FeFET) was one of the most promising devices replacing the conventional Flash memory facing physical scaling limitations at those times. A variant of charge storage memory referred to as Flash memory is widely used in consumer electronic products such as cell phones and music players while NAND Flash-based solid-state disks (SSDs) are increasingly displacing hard disk drives as the primary storage device in laptops, desktops, and even data centers. The integration limit of Flash memories is approaching, and many new types of memory to replace conventional Flash memories have been proposed. Emerging memory technologies promise new memories to store more data at less cost than the expensive-to-build silicon chips used by popular consumer gadgets including digital cameras, cell phones and portable music players. They are being investigated and lead to the future as potential alternatives to existing memories in future computing systems. Emerging nonvolatile memory technologies such as magnetic random-access memory (MRAM), spin-transfer torque random-access memory (STT-RAM), ferroelectric random-access memory (FeRAM), phase-change memory (PCM), and resistive random-access memory (RRAM) combine the speed of static random-access memory (SRAM), the density of dynamic random-access memory (DRAM), and the nonvolatility of Flash memory and so become very attractive as another possibility for future memory hierarchies. Many other new classes of emerging memory technologies such as transparent and plastic, three-dimensional (3-D), and quantum dot memory technologies have also gained tremendous popularity in recent years. Subsequently, not an exaggeration to say that computer memory could soon earn the ultimate commercial validation for commercial scale-up and production the cheap plastic knockoff. Therefore, this review is devoted to the rapidly developing new

Exascale Storage Systems the SIRIUS Way

Science.gov (United States)

Klasky, S. A.; Abbasi, H.; Ainsworth, M.; Choi, J.; Curry, M.; Kurc, T.; Liu, Q.; Lofstead, J.; Maltzahn, C.; Parashar, M.; Podhorszki, N.; Suchyta, E.; Wang, F.; Wolf, M.; Chang, C. S.; Churchill, M.; Ethier, S.

2016-10-01

As the exascale computing age emerges, data related issues are becoming critical factors that determine how and where we do computing. Popular approaches used by traditional I/O solution and storage libraries become increasingly bottlenecked due to their assumptions about data movement, re-organization, and storage. While, new technologies, such as “burst buffers”, can help address some of the short-term performance issues, it is essential that we reexamine the underlying storage and I/O infrastructure to effectively support requirements and challenges at exascale and beyond. In this paper we present a new approach to the exascale Storage System and I/O (SSIO), which is based on allowing users to inject application knowledge into the system and leverage this knowledge to better manage, store, and access large data volumes so as to minimize the time to scientific insights. Central to our approach is the distinction between the data, metadata, and the knowledge contained therein, transferred from the user to the system by describing “utility” of data as it ages.

Pumped Storage and Potential Hydropower from Conduits

Energy Technology Data Exchange (ETDEWEB)

none,

2015-02-25

Th is Congressional Report, Pumped Storage Hydropower and Potential Hydropower from Conduits, addresses the technical flexibility that existing pumped storage facilities can provide to support intermittent renewable energy generation. This study considered potential upgrades or retrofit of these facilities, the technical potential of existing and new pumped storage facilities to provide grid reliability benefits, and the range of conduit hydropower opportunities available in the United States.

Information Storage and Management Storing, Managing, and Protecting Digital Information in Classic, Virtualized, and Cloud Environments

CERN Document Server

Services, EMC Education

2012-01-01

The new edition of a bestseller, now revised and update throughout! This new edition of the unparalleled bestseller serves as a full training course all in one and as the world's largest data storage company, EMC is the ideal author for such a critical resource. They cover the components of a storage system and the different storage system models while also offering essential new material that explores the advances in existing technologies and the emergence of the "Cloud" as well as updates and vital information on new technologies. Features a separate section on emerging area of cloud computi

77 FR 33773 - Announcement Regarding States Triggering “On” or “Off” in the Emergency Unemployment Compensation...

Science.gov (United States)

2012-06-07

... Triggering ``On'' or ``Off'' in the Emergency Unemployment Compensation 2008 (EUC08) Program and the Federal...: Notice. SUMMARY: Announcement regarding states triggering ``on'' or ``off'' in the Emergency Unemployment... unemployment rate be at least 110% of one of the rates from a comparable prior period in one of the three prior...

Cement-Based Materials for Nuclear Waste Storage

CERN Document Server

Cau-di-Coumes, Céline; Frizon, Fabien; Lorente, Sylvie

2013-01-01

As the re-emergence of nuclear power as an acceptable energy source on an international basis continues, the need for safe and reliable ways to dispose of radioactive waste becomes ever more critical. The ultimate goal for designing a predisposal waste-management system depends on producing waste containers suitable for storage, transportation and permanent disposal. Cement-Based Materials for Nuclear-Waste Storage provides a roadmap for the use of cementation as an applied technique for the treatment of low- and intermediate-level radioactive wastes.Coverage includes, but is not limited to, a comparison of cementation with other solidification techniques, advantages of calcium-silicate cements over other materials and a discussion of the long-term suitability and safety of waste packages as well as cement barriers. This book also: Discusses the formulation and production of cement waste forms for storing radioactive material Assesses the potential of emerging binders to improve the conditioning of problemati...

On the value and price-responsiveness of ramp-constrained storage

International Nuclear Information System (INIS)

Faghih, Ali; Roozbehani, Mardavij; Dahleh, Munther A.

2013-01-01

Highlights: • Derived the optimal policy and value function for ramp-constrained storage. • Gave analytic bound on long-term value, and explicit formulas for policy thresholds. • Value of storage saturates as capacity increases, regardless of price volatility. • In expectation, storage can induce high price elasticity near the mean price. • The buy/sell phase transition region in the price-state plane is steep. - Abstract: The primary concerns of this paper are twofold: understanding the value of storage in the presence of ramp constraints and exogenous energy prices, and understanding the implications of the associated optimal storage management policy for qualitative and quantitative characteristics of storage response to real-time prices. The optimal policy, along with the associated finite-horizon time-averaged value of storage, are analytically characterized in this paper. An analytical upper bound on the infinite-horizon time-averaged value of storage is also derived. This bound is valid for any achievable realization of prices when the support of the distribution is fixed, and highlights the dependence of the value of storage on ramp constraints and storage capacity. It is shown that while the value of storage is a non-decreasing function of price volatility, due to the finite ramp rate, the value of storage saturates quickly as the capacity increases, regardless of volatility. To study the implications of the optimal policy, computational experiments are presented that suggest optimal utilization of storage can, in expectation, induce a considerable amount of price elasticity near the average price. Then, a computational framework is presented for characterization of the behavior of storage as a function of price and the state of charge, which illustrates a steep buy/sell phase transition in the price-state plane

Self-organized emergence of multilayer structure and chimera states in dynamical networks with adaptive couplings

Science.gov (United States)

Kasatkin, D. V.; Yanchuk, S.; Schöll, E.; Nekorkin, V. I.

2017-12-01

We report the phenomenon of self-organized emergence of hierarchical multilayered structures and chimera states in dynamical networks with adaptive couplings. This process is characterized by a sequential formation of subnetworks (layers) of densely coupled elements, the size of which is ordered in a hierarchical way, and which are weakly coupled between each other. We show that the hierarchical structure causes the decoupling of the subnetworks. Each layer can exhibit either a two-cluster state, a periodic traveling wave, or an incoherent state, and these states can coexist on different scales of subnetwork sizes.

Spent fuel storage requirements 1993--2040

International Nuclear Information System (INIS)

1994-09-01

Historical inventories of spent fuel are combined with U.S. Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the United States to provide estimates of spent fuel storage requirements through the year 2040. The needs are estimated for storage capacity beyond that presently available in the reactor storage pools. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of spent fuel to other reactors or facilities. Existing and future dry storage facilities are also discussed. The nuclear utilities provide historical data through December 1992 on the end of reactor life are based on the DOE/Energy Information Administration (EIA) estimates of future nuclear capacity, generation, and spent fuel discharges

Emergency water supply facility for nuclear reactor

International Nuclear Information System (INIS)

Karasawa, Toru

1998-01-01

Water is stored previously in an equipment storage pit disposed on an operator floor of a reactor building instead of a condensate storage vessel. Upon occurrence of an emergency, water is supplied from the equipment storage pit by way of a sucking pipeline to a pump of a high pressure reactor core water injection circuit and a pump of a reactor-isolation cooling circuit to supply water to a reactor. The equipment storage pit is arranged in a building so that the depth thereof is determined to keep the required amount of water by storing water at a level lower than the lower end of a pool gate during normal operation. Water is also supplied from the equipment storage pit by way of a supply pipeline to a spent fuel storage pool on the operation floor of the reactor building. Namely, water is supplied to the spent fuel storage pool by a pump of a fuel pool cooling and cleaning circuit. This can eliminate a suppression pool cleaning circuit. (I.N.)

15 CFR 904.507 - Recovery of certain storage costs.

Science.gov (United States)

2010-01-01

... fee for expenses to the United States connected with the transfer, board, handling or storage of such... States connected with the storage, care and maintenance of such property. Within a reasonable time after... the bill objects to the reasonableness of the costs assessed he or she may, within 30 days of receipt...

Emerging Security Mechanisms for Medical Cyber Physical Systems.

Science.gov (United States)

Kocabas, Ovunc; Soyata, Tolga; Aktas, Mehmet K

2016-01-01

The following decade will witness a surge in remote health-monitoring systems that are based on body-worn monitoring devices. These Medical Cyber Physical Systems (MCPS) will be capable of transmitting the acquired data to a private or public cloud for storage and processing. Machine learning algorithms running in the cloud and processing this data can provide decision support to healthcare professionals. There is no doubt that the security and privacy of the medical data is one of the most important concerns in designing an MCPS. In this paper, we depict the general architecture of an MCPS consisting of four layers: data acquisition, data aggregation, cloud processing, and action. Due to the differences in hardware and communication capabilities of each layer, different encryption schemes must be used to guarantee data privacy within that layer. We survey conventional and emerging encryption schemes based on their ability to provide secure storage, data sharing, and secure computation. Our detailed experimental evaluation of each scheme shows that while the emerging encryption schemes enable exciting new features such as secure sharing and secure computation, they introduce several orders-of-magnitude computational and storage overhead. We conclude our paper by outlining future research directions to improve the usability of the emerging encryption schemes in an MCPS.

The Potential for Energy Storage to Provide Peaking Capacity in California under Increased Penetration of Solar Photovoltaics: Report Summary

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Margolis, Robert M [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

2018-03-12

Opportunities to provide peaking capacity with low-cost energy storage are emerging. But adding storage changes the ability of subsequent storage additions to meet peak demand. Increasing photovoltaic (PV) deployment also affects storage's ability to provide peak capacity. This study examines storage's potential to replace conventional peak capacity in California.

The next generation mass storage devices - Physical principles and current status

Science.gov (United States)

Wang, L.; Gai, S.

2014-04-01

The amount of digital data today has been increasing at a phenomenal rate due to the widespread digitalisation service in almost every industry. The need to store such ever-increasing data aggressively triggers the requirement to augment the storage capacity of the conventional storage technologies. Unfortunately, the physical limitations that conventional forms face have severely handicapped their potential to meet the storage need from both consumer and industry point of view. The focus has therefore been switched into the development of the innovative data storage technologies such as scanning probe memory, nanocrystal memory, carbon nanotube memory, DNA memory, and organic memory. In this paper, we review the physical principles of these emerging storage technologies and their superiorities as the next generation data storage device, as well as their respective technical challenges on further enhancing the storage capacity. We also compare these novel technologies with the mainstream data storage means according to the technology roadmap on areal density.

Optical information storage

International Nuclear Information System (INIS)

Woike, T.

1996-01-01

In order to increase storage capacity and data transfer velocity by about three orders of magnitude compared to CD or magnetic disc it is necessary to work with optical techniques, especially with holography. About 100 TByte can be stored in a waver of an area of 50 cm 2 via holograms which corresponds to a density of 2.10 9 Byte/mm 2 . Every hologram contains data of 1 MByte, so that parallel-processing is possible for read-out. Using high-speed CCD-arrays a read-out velocity of 1 MByte/μsec can be reached. Further, holographic technics are very important in solid state physics. We will discuss the existence of a space charge field in Sr 1-x Ba x Nb 2 O 6 doped with cerium and the physical properties of metastable states, which are suited for information storage. (author) 19 figs., 9 refs

Privacy-preserving smart meter control strategy including energy storage losses

OpenAIRE

Avula, Chinni Venkata Ramana R.; Oechtering, Tobias J.; Månsson, Daniel

2018-01-01

Privacy-preserving smart meter control strategies proposed in the literature so far make some ideal assumptions such as instantaneous control without delay, lossless energy storage systems etc. In this paper, we present a one-step-ahead predictive control strategy using Bayesian risk to measure and control privacy leakage with an energy storage system. The controller estimates energy state using a three-circuit energy storage model to account for steady-state energy losses. With numerical exp...

The State of Emergency Medical Services (EMS) Systems in Africa.

Science.gov (United States)

Mould-Millman, Nee-Kofi; Dixon, Julia M; Sefa, Nana; Yancey, Arthur; Hollong, Bonaventure G; Hagahmed, Mohamed; Ginde, Adit A; Wallis, Lee A

2017-06-01

Introduction Little is known about the existence, distribution, and characteristics of Emergency Medical Services (EMS) systems in Africa, or the corresponding epidemiology of prehospital illness and injury. A survey was conducted between 2013 and 2014 by distributing a detailed EMS system questionnaire to experts in paper and electronic versions. The questionnaire ascertained EMS systems' jurisdiction, operations, finance, clinical care, resources, and regulatory environment. The discovery of respondents with requisite expertise occurred in multiple phases, including snowball sampling, a review of published scientific literature, and a rigorous search of the Internet. The survey response rate was 46%, and data represented 49 of 54 (91%) African countries. Twenty-five EMS systems were identified and distributed among 16 countries (30% of African countries). There was no evidence of EMS systems in 33 (61%) countries. A total of 98,574,731 (8.7%) of the African population were serviced by at least one EMS system in 2012. The leading causes of EMS transport were (in order of decreasing frequency): injury, obstetric, respiratory, cardiovascular, and gastrointestinal complaints. Nineteen percent of African countries had government-financed EMS systems and 26% had a toll-free public access telephone number. Basic emergency medical technicians (EMTs) and Basic Life Support (BLS)-equipped ambulances were the most common cadre of provider and ambulance level, respectively (84% each). Emergency Medical Services systems exist in one-third of African countries. Injury and obstetric complaints are the leading African prehospital conditions. Only a minority (<9.0%) of Africans have coverage by an EMS system. Most systems were predominantly BLS, government operated, and fee-for-service. Mould-Millman NK , Dixon JM , Sefa N , Yancey A , Hollong BG , Hagahmed M , Ginde AA , Wallis LA . The state of Emergency Medical Services (EMS) systems in Africa. Prehosp Disaster Med. 2017;32(3):273-283.

State Emergency Response and Field Observation Activities in California (USA) during the March 11, 2011, Tohoku Tsunami

Science.gov (United States)

Miller, K. M.; Wilson, R. I.; Goltz, J.; Fenton, J.; Long, K.; Dengler, L.; Rosinski, A.; California Tsunami Program

2011-12-01

This poster will present an overview of successes and challenges observed by the authors during this major tsunami response event. The Tohoku, Japan tsunami was the most costly to affect California since the 1964 Alaskan earthquake and ensuing tsunami. The Tohoku tsunami caused at least $50 million in damage to public facilities in harbors and marinas along the coast of California, and resulted in one fatality. It was generated by a magnitude 9.0 earthquake which occurred at 9:46PM PST on Thursday, March 10, 2011 in the sea off northern Japan. The tsunami was recorded at tide gages monitored by the West Coast/Alaska Tsunami Warning Center (WCATWC), which projected tsunami surges would reach California in approximately 10 hours. At 12:51AM on March 11, 2011, based on forecasted tsunami amplitudes, the WCATWC placed the California coast north of Point Conception (Santa Barbara County) in a Tsunami Warning, and the coast south of Point Conception to the Mexican border in a Tsunami Advisory. The California Emergency Management Agency (CalEMA) activated two Regional Emergency Operation Centers (REOCs) and the State Operation Center (SOC). The California Geological Survey (CGS) deployed a field team which collected data before, during and after the event through an information clearinghouse. Conference calls were conducted hourly between the WCATWC and State Warning Center, as well as with emergency managers in the 20 coastal counties. Coordination focused on local response measures, public information messaging, assistance needs, evacuations, emergency shelters, damage, and recovery issues. In the early morning hours, some communities in low lying areas recommended evacuation for their citizens, and the fishing fleet at Crescent City evacuated to sea. The greatest damage occurred in the harbors of Crescent City and Santa Cruz. As with any emergency, there were lessons learned and important successes in managing this event. Forecasts by the WCATWC were highly accurate

Recent Applications of 2D Inorganic Nanosheets for Emerging Energy Storage System.

Science.gov (United States)

Oh, Seung Mi; Patil, Sharad B; Jin, Xiaoyan; Hwang, Seong-Ju

2018-04-03

Among many types of nanostructured inorganic materials, highly anisotropic 2D nanosheets provide unique advantages in designing and synthesizing efficient electrode and electrocatalyst materials for novel energy storage technologies. 2D inorganic nanosheets boast lots of unique characteristics such as high surface area, short ion diffusion path, tailorable compositions, and tunable electronic structures. These merits of 2D inorganic nanosheets render them promising candidate materials as electrodes for diverse secondary batteries and supercapacitors, and electrocatalysts. A wide spectrum of examples is presented for inorganic nanosheet-based electrodes and electrocatalysts. Future perspectives in research about 2D nanosheet-based functional materials are discussed to provide insight for the development of next-generation energy storage systems using 2D nanostructured materials. © 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

National Characteristics of Emergency Medical Services Responses for Older Adults in the United States.

Science.gov (United States)

Duong, Hieu V; Herrera, Lauren Nicholas; Moore, Justin Xavier; Donnelly, John; Jacobson, Karen E; Carlson, Jestin N; Mann, N Clay; Wang, Henry E

2018-01-01

Older adults, those aged 65 and older, frequently require emergency care. However, only limited national data describe the Emergency Medical Services (EMS) care provided to older adults. We sought to determine the characteristics of EMS care provided to older adults in the United States. We used data from the 2014 National Emergency Medical Services Information System (NEMSIS), encompassing EMS response data from 46 States and territories. We excluded EMS responses for children older adults as age ≥65 years. We compared patient demographics (age, sex, race, primary payer), response characteristics (dispatch time, location type, time intervals), and clinical course (clinical impression, injury, procedures, medications) between older and younger adult EMS emergency 9-1-1 responses. During the study period there were 20,212,245 EMS emergency responses. Among the 16,116,219 adult EMS responses, there were 6,569,064 (40.76%) older and 9,547,155 (59.24%) younger adults. Older EMS patients were more likely to be white and the EMS incident to be located in healthcare facilities (clinic, hospital, nursing home). Compared with younger patients, older EMS patients were more likely to present with syncope (5.68% vs. 3.40%; OR 1.71; CI: 1.71-1.72), cardiac arrest/rhythm disturbance (3.27% vs. 1.69%; OR 1.97; CI: 1.96-1.98), stroke (2.18% vs. 0.74%; OR 2.99; CI: 2.96-3.02) and shock (0.77% vs. 0.38%; OR 2.02; CI: 2.00-2.04). Common EMS interventions performed on older persons included intravenous access (32.02%), 12-lead ECG (14.37%), CPR (0.87%), and intubation (2.00%). The most common EMS drugs administered to older persons included epinephrine, atropine, furosemide, amiodarone, and albuterol or ipratropium. One of every three U.S. EMS emergency responses involves older adults. EMS personnel must be prepared to care for the older patient.

A solar receiver-storage modular cascade based on porous ceramic structures for hybrid sensible/thermochemical solar energy storage

Science.gov (United States)

Agrafiotis, Christos; de Oliveira, Lamark; Roeb, Martin; Sattler, Christian

2016-05-01

The current state-of-the-art solar heat storage concept in air-operated Solar Tower Power Plants is to store the solar energy provided during on-sun operation as sensible heat in porous solid materials that operate as recuperators during off-sun operation. The technology is operationally simple; however its storage capacity is limited to 1.5 hours. An idea for extending this capacity is to render this storage concept from "purely" sensible to "hybrid" sensible/ thermochemical one, via coating the porous heat exchange modules with oxides of multivalent metals for which their reduction/oxidation reactions are accompanied by significant heat effects, or by manufacturing them entirely of such oxides. In this way solar heat produced during on-sun operation can be used (in addition to sensibly heating the porous solid) to power the endothermic reduction of the oxide from its state with the higher metal valence to that of the lower; the thermal energy can be entirely recovered by the reverse exothermic oxidation reaction (in addition to sensible heat) during off-sun operation. Such sensible and thermochemical storage concepts were tested on a solar-irradiated receiver- heat storage module cascade for the first time. Parametric studies performed so far involved the comparison of three different SiC-based receivers with respect to their capability of supplying solar-heated air at temperatures sufficient for the reduction of the oxides, the effect of air flow rate on the temperatures achieved within the storage module, as well as the comparison of different porous storage media made of cordierite with respect to their sensible storage capacity.

National Systematic Legal Review of State Policies on Emergency Medical Services Licensure Levels' Authority to Administer Opioid Antagonists.

Science.gov (United States)

Kinsman, Jeremiah M; Robinson, Kathy

2018-02-27

Previous research conducted in November 2013 found there were a limited number of states and territories in the United States (US) that authorize emergency medical technicians (EMTs) and emergency medical responders (EMRs) to administer opioid antagonists. Given the continued increase in the number of opioid-related overdoses and deaths, many states have changed their policies to authorize EMTs and EMRs to administer opioid antagonists. The goal of this study is to provide an updated description of policy on EMS licensure levels' authority to administer opioid antagonists for all 50 US states, the District of Columbia (DC), and the Commonwealth of Puerto Rico (PR). State law and scopes of practice were systematically reviewed using a multi-tiered approach to determine each state's legally-defined EMS licensure levels and their authority to administer an opioid antagonist. State law, state EMS websites, and state EMS scope of practice documents were identified and searched using Google Advanced Search with Boolean Search Strings. Initial results of the review were sent to each state office of EMS for review and comment. As of September 1, 2017, 49 states and DC authorize EMTs to administer an opioid antagonist. Among the 40 US jurisdictions (39 states and DC) that define the EMR or a comparable first responder licensure level in state law, 37 states and DC authorize their EMRs to administer an opioid antagonist. Paramedics are authorized to administer opioid antagonists in all 50 states, DC, and PR. All 49 of the US jurisdictions (48 states and DC) that define the advanced emergency medical technician (AEMT) or a comparable intermediate EMS licensure level in state law authorize their AEMTs to administer an opioid antagonist. 49 out of 52 US jurisdictions (50 states, DC, and PR) authorize all existing levels of EMS licensure levels to administer an opioid antagonist. Expanding access to this medication can save lives, especially in communities that have limited

Thermodynamic analysis of a compressed carbon dioxide energy storage system using two saline aquifers at different depths as storage reservoirs

International Nuclear Information System (INIS)

Liu, Hui; He, Qing; Borgia, Andrea; Pan, Lehua; Oldenburg, Curtis M.

2016-01-01

Highlights: • A compressed CO_2 energy storage system using two storage reservoirs is presented. • Compressed CO_2 energy storage density is higher than that of CAES. • The effects of storage reservoir pressure on the system performance are studied. - Abstract: Compressed air energy storage (CAES) is one of the leading large-scale energy storage technologies. However, low thermal efficiency and low energy storage density restrict its application. To improve the energy storage density, we propose a two-reservoir compressed CO_2 energy storage system. We present here thermodynamic and parametric analyses of the performance of an idealized two-reservoir CO_2 energy storage system under supercritical and transcritical conditions using a steady-state mathematical model. Results show that the transcritical compressed CO_2 energy storage system has higher round-trip efficiency and exergy efficiency, and larger energy storage density than the supercritical compressed CO_2 energy storage. However, the configuration of supercritical compressed CO_2 energy storage is simpler, and the energy storage densities of the two systems are both higher than that of CAES, which is advantageous in terms of storage volume for a given power rating.

Velocity Model for CO2 Sequestration in the Southeastern United States Atlantic Continental Margin

Science.gov (United States)

Ollmann, J.; Knapp, C. C.; Almutairi, K.; Almayahi, D.; Knapp, J. H.

2017-12-01

The sequestration of carbon dioxide (CO2) is emerging as a major player in offsetting anthropogenic greenhouse gas emissions. With 40% of the United States' anthropogenic CO2 emissions originating in the southeast, characterizing potential CO2 sequestration sites is vital to reducing the United States' emissions. The goal of this research project, funded by the Department of Energy (DOE), is to estimate the CO2 storage potential for the Southeastern United States Atlantic Continental Margin. Previous studies find storage potential in the Atlantic continental margin. Up to 16 Gt and 175 Gt of storage potential are estimated for the Upper Cretaceous and Lower Cretaceous formations, respectively. Considering 2.12 Mt of CO2 are emitted per year by the United States, substantial storage potential is present in the Southeastern United States Atlantic Continental Margin. In order to produce a time-depth relationship, a velocity model must be constructed. This velocity model is created using previously collected seismic reflection, refraction, and well data in the study area. Seismic reflection horizons were extrapolated using well log data from the COST GE-1 well. An interpolated seismic section was created using these seismic horizons. A velocity model will be made using P-wave velocities from seismic reflection data. Once the time-depth conversion is complete, the depths of stratigraphic units in the seismic refraction data will be compared to the newly assigned depths of the seismic horizons. With a lack of well control in the study area, the addition of stratigraphic unit depths from 171 seismic refraction recording stations provides adequate data to tie to the depths of picked seismic horizons. Using this velocity model, the seismic reflection data can be presented in depth in order to estimate the thickness and storage potential of CO2 reservoirs in the Southeastern United States Atlantic Continental Margin.

Strength analysis and optimization of welding robot mechanism in emergency stop state

Directory of Open Access Journals (Sweden)

Zdeněk Poruba

2016-03-01

Full Text Available The contribution deals with the strength analysis and optimization of the welding robot mechanism in emergency stop state. The common operational positioning of the welding robot is characterized by smooth course of speeds in the time. The resulting load does not differ significantly from the static loading. However the safety requirements given by the norm require the ability of emergency stop function. Since the course of speed in time is rather steep the higher values of acceleration and thus higher excitation force is expected. The dynamical simulation performed describes the response of the robot mechanism in the form of stress course in time, quantifies the peak values of the stress caused by the dynamical component of loading and highlights the potential risks associated with this phenomenon.

Uranium retrieval support, storage, and marketing

International Nuclear Information System (INIS)

Jackson, J.D.; Marshall, E.M.

2001-01-01

The United States Department of Energy is implementing a stewardship approach to management of uranium assets. This life-cycle approach to managing uranium addresses current needs in the context of a long-term strategy. In June 1998, the United States Department of Energy established the Uranium Management Group. The mission of the UMG is to safely collect and store commercially viable uranium from various DOE facilities at a central location. The Oak Ridge Operations Office, in Oak Ridge, Tennessee, was given the task to establish a facility for the storage of these uranium materials. Materials collected are non-waste uranium and packaged to allow transport and long-term storage. Coordination of uranium management under the Uranium Management Group offers significant opportunities for sayings through improved planning and efficiency and creates an environmentally sound approach for the storage and reuse of excess uranium. (author)

Uranium retrieval support, storage, and marketing

Energy Technology Data Exchange (ETDEWEB)

Jackson, J.D.; Marshall, E.M. [U.S. Department of Energy, Oak Ridge, Tennessee (United States)

2001-07-01

The United States Department of Energy is implementing a stewardship approach to management of uranium assets. This life-cycle approach to managing uranium addresses current needs in the context of a long-term strategy. In June 1998, the United States Department of Energy established the Uranium Management Group. The mission of the UMG is to safely collect and store commercially viable uranium from various DOE facilities at a central location. The Oak Ridge Operations Office, in Oak Ridge, Tennessee, was given the task to establish a facility for the storage of these uranium materials. Materials collected are non-waste uranium and packaged to allow transport and long-term storage. Coordination of uranium management under the Uranium Management Group offers significant opportunities for sayings through improved planning and efficiency and creates an environmentally sound approach for the storage and reuse of excess uranium. (author)

Heat pipe based cold energy storage systems for datacenter energy conservation

International Nuclear Information System (INIS)

Singh, Randeep; Mochizuki, Masataka; Mashiko, Koichi; Nguyen, Thang

2011-01-01

In the present paper, design and economics of the novel type of thermal control system for datacenter using heat pipe based cold energy storage has been proposed and discussed. Two types of cold energy storage system namely: ice storage system and cold water storage system are explained and sized for datacenter with heat output capacity of 8800 kW. Basically, the cold energy storage will help to reduce the chiller running time that will save electricity related cost and decrease greenhouse gas emissions resulting from the electricity generation from non-renewable sources. The proposed cold energy storage system can be retrofit or connected in the existing datacenter facilities without major design changes. Out of the two proposed systems, ice based cold energy storage system is mainly recommended for datacenters which are located in very cold locations and therefore can offer long term seasonal storage of cold energy within reasonable cost. One of the potential application domains for ice based cold energy storage system using heat pipes is the emergency backup system for datacenter. Water based cold energy storage system provides more compact size with short term storage (hours to days) and is potential for datacenters located in areas with yearly average temperature below the permissible cooling water temperature (∼25 o C). The aforesaid cold energy storage systems were sized on the basis of metrological conditions in Poughkeepsie, New York. As an outcome of the thermal and cost analysis, water based cold energy storage system with cooling capability to handle 60% of datacenter yearly heat load will provide an optimum system size with minimum payback period of 3.5 years. Water based cold energy storage system using heat pipes can be essentially used as precooler for chiller. Preliminary results obtained from the experimental system to test the capability of heat pipe based cold energy storage system have provided satisfactory outcomes and validated the proposed

McPhy-Energy’s proposal for solid state hydrogen storage materials and systems

Energy Technology Data Exchange (ETDEWEB)

Jehan, Michel, E-mail: michel.jehan@mcphy.com [McPhy Energy SA, ZA Retière, 26190 La Motte-Fanjas (France); Fruchart, Daniel, E-mail: daniel.fruchart@grenoble.cnrs.fr [McPhy Energy SA, ZA Retière, 26190 La Motte-Fanjas (France); Institut Néel and CRETA, CNRS, 25 Avenue des Martyrs, BP 166, 38042 Grenoble Cedex 9 (France)

2013-12-15

Highlights: •Mechanical alloying with nano-structurizing highly reactive magnesium metal hydrides particles. •Solid reversible hydrogen storage at scale of kg to tons of hydrogen using MgH{sub 2} composite discs. •Natural Expanded Graphite draining heat of reaction during sorption. •Change Phase Material storing reversibly heat of reaction within tank storage as adiabatic system. •Technology fully adapted for renewable energy storage and network energy peak shavings through H{sub 2}. -- Abstract: The renewable resources related, for instance, to solar energies exhibit two main characteristics. They have no practical limits in regards to the efficiency and their various capture methods. However, their intermittence prevents any direct and immediate use of the resulting power. McPhy-Energy proposes solutions based on water electrolysis for hydrogen generation and storage on reversible metal hydrides to efficiently cover various energy generation ranges from MW h to GW h. Large stationary storage units, based on MgH{sub 2}, are presently developed, including both the advanced materials and systems for a total energy storage from ∼70 to more than 90% efficient. Various designs of MgH{sub 2}-based tanks are proposed, allowing the optional storage of the heat of the Mg–MgH{sub 2} reaction in an adjacent phase changing material. The combination of these operations leads to the storage of huge amounts of hydrogen and heat in our so-called adiabatic-tanks. Adapted to intermittent energy production and consumption from renewable sources (wind, sun, tide, etc.), nuclear over-production at night, or others, tanks distribute energy on demand for local applications (on-site domestic needs, refueling stations, etc.) via turbine or fuel cell electricity production.

Planning guidance for the Chemical Stockpile Emergency Preparedness Program

Energy Technology Data Exchange (ETDEWEB)

Shumpert, B.L.; Watson, A.P.; Sorensen, J.H. [and others

1995-02-01

This planning guide was developed under the direction of the U.S. Army and the Federal Emergency Management Agency (FEMA) which jointly coordinate and direct the development of the Chemical Stockpile Emergency Preparedness Program (CSEPP). It was produced to assist state, local, and Army installation planners in formulating and coordinating plans for chemical events that may occur at the chemical agent stockpile storage locations in the continental United States. This document provides broad planning guidance for use by both on-post and off-post agencies and organizations in the development of a coordinated plan for responding to chemical events. It contains checklists to assist in assuring that all important aspects are included in the plans and procedures developed at each Chemical Stockpile Disposal Program (CSDP) location. The checklists are supplemented by planning guidelines in the appendices which provide more detailed guidance regarding some issues. The planning guidance contained in this document will help ensure that adequate coordination between on-post and off-post planners occurs during the planning process. This planning guide broadly describes an adequate emergency planning base that assures that critical planning decisions will be made consistently at every chemical agent stockpile location. This planning guide includes material drawn from other documents developed by the FEMA, the Army, and other federal agencies with emergency preparedness program responsibilities. Some of this material has been developed specifically to meet the unique requirements of the CSEPP. In addition to this guidance, other location-specific documents, technical studies, and support studies should be used as needed to assist in the planning at each of the chemical agent stockpile locations to address the specific hazards and conditions at each location.

Control of photon storage time using phase locking.

Science.gov (United States)

Ham, Byoung S

2010-01-18

A photon echo storage-time extension protocol is presented by using a phase locking method in a three-level backward propagation scheme, where phase locking serves as a conditional stopper of the rephasing process in conventional two-pulse photon echoes. The backward propagation scheme solves the critical problems of extremely low retrieval efficiency and pi rephasing pulse-caused spontaneous emission noise in photon echo based quantum memories. The physics of the storage time extension lies in the imminent population transfer from the excited state to an auxiliary spin state by a phase locking control pulse. We numerically demonstrate that the storage time is lengthened by spin dephasing time.

Manual for first responders to a radiological emergency. Emergency preparedness and response

International Nuclear Information System (INIS)

2008-01-01

Under Article 5.a(ii) of the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (Assistance Convention), one function of the IAEA is to collect and disseminate to States Parties and Member States information concerning methodologies, techniques and results of research relating to response to nuclear or radiological emergencies. As stated in IAEA Safety Standards Series No. GS-R-2 'Preparedness and Response for a Nuclear or Radiological Emergency', which establishes the requirements for an adequate level of preparedness for and response to a nuclear or radiological emergency in any State, 'first responders shall take all practicable and appropriate actions to minimize the consequences of a nuclear or radiological emergency'. The IAEA General Conference, in resolution GC(49)/RES/9, continues to encourage Member States 'to adopt the relevant Agency standards, procedures and practical tools' and underlines 'the need for first responders to have appropriate training for dealing with ionizing radiation during nuclear and radiological emergencies'. This publication is intended to assist in meeting these requirements and to fulfil Article 5 of the Assistance Convention. Its aim is to provide practical guidance for those who will respond during the first few hours to a radiological emergency (referred to here as 'first responders') and for national officials who would support this early response. It provides guidance in the form of action guides, instructions, and supporting data that can be easily applied by a State to build a basic capability to respond to a radiological emergency. This guidance should be adapted to fit the user State's organizational arrangements, language, terminology, concept of operation and capabilities. This report, published as part of the IAEA Emergency Preparedness and Response Series, replaces and builds on IAEA-TECDOC-1162 in the area of early response and first responders' actions. It takes account of the

Anthology of dry storage solutions

Energy Technology Data Exchange (ETDEWEB)

Allimann, Nathalie; Otton, Camille [AREVA, Paris (France)

2012-03-15

Around 35,000 PWR, BWR or Veer used fuel elements with various enrichment value up to 5%, various cooling time down to 2 years and various burn-ups up to 60,000 Mwd/tU are currently stored in AREVA dry storage solutions. These solutions are delivered in the United States, in Japan and in many European countries like Belgium, Switzerland, Italy, Armenia and Germany. With more than 1000 dry storage solutions delivered all over the world AREVA is the leader on this market. Dealing with dry storage is not an easy task. Products have to be flexible, to be adapted to customer needs and to the national regulations which may stipulate very strict tests such as airplane crash or simulation of earthquake. To develop a dry storage solution for a foreign country means to deal with its national competent authorities. All the national competent authorities do not have the same requirements. Storage conditions may also be different.

Anthology of dry storage solutions

International Nuclear Information System (INIS)

Allimann, Nathalie; Otton, Camille

2012-01-01

Around 35,000 PWR, BWR or Veer used fuel elements with various enrichment value up to 5%, various cooling time down to 2 years and various burn-ups up to 60,000 Mwd/tU are currently stored in AREVA dry storage solutions. These solutions are delivered in the United States, in Japan and in many European countries like Belgium, Switzerland, Italy, Armenia and Germany. With more than 1000 dry storage solutions delivered all over the world AREVA is the leader on this market. Dealing with dry storage is not an easy task. Products have to be flexible, to be adapted to customer needs and to the national regulations which may stipulate very strict tests such as airplane crash or simulation of earthquake. To develop a dry storage solution for a foreign country means to deal with its national competent authorities. All the national competent authorities do not have the same requirements. Storage conditions may also be different

Mutual emergency assistance in the event of accident during transport of radioactive materials within the member states of the European Community

International Nuclear Information System (INIS)

Selling, H.A.

1984-01-01

The study consist of a compilation of information on the relevant emergency response plans that are at present in existence in the ten countries of the European Community. Consideration is given to the development of proposals for facilitating co-operation between the emergency services in different countries, particularly with regard to accidents that might occur near national boundaries or in countries in which all the necessary resources might not be available. The particular items of interest covered in this study are: compilation of information on existing organizational emergency response arrangements within each Member State relating to accidents in the transport of radioactive materials by all modes, including road, rail, inland waterways, air and compilation of information on existing arrangements for receiving or providing assistance from or to other Member States. Identification of any avoidable incompatibilities on an international scale. Recommendations for improving the existing arrangements and for encouraging the development of adequate systems of mutual emergency notification, liaison and assistance as required by the circumstances, recommendations should be compatible with the broader framework of emergency response for all types of accidents developed within Member States and envisaged in the IAEA system for mutual emergency assistance

Design criteria tank farm storage and staging facility. Revision 1

International Nuclear Information System (INIS)

Lott, D.T.

1994-01-01

Tank Farms Operations must store/stage material and equipment until work packages are ready to work. Consumable materials are also required to be stored for routine and emergency work. Connex boxes and open storage is currently used for much of the storage because of the limited space at 272AW and 272WA. Safety issues based on poor housekeeping and material deteriorating due to weather damage has resulted from this inadequate storage space. It has been determined that a storage building in close proximity to the Tank Farm work force would be cost effective. Project W-402 and W-413 will provide a storage/staging area in 200 East and West Areas by the construction of two new storage facilities. The new facilities will be used by Operations, Maintenance and Materials groups to adequately store material and equipment. These projects will also furnish electrical services to the facilities for lighting and HVAC. Fire Protection shall be extended to the 200 East facility from 272AW if necessary

Effect of storage in overcoming seed dormancy of Annona coriacea Mart. seeds

Directory of Open Access Journals (Sweden)

DAIANE M. DRESCH

2014-12-01

Full Text Available The aim of this study was to evaluate the effect of pre-treatments on overcoming dormancy of A. coriacea seeds. Seeds were processed and stored in polyethylene bags at temperatures of at -18°C (42% RH, 5°C (34% RH, 15°C (60% RH and 25°C (34% RH, during 0, 30, 60, 90, 120 and 150 days. After storage, seeds were immersed in 350 mg.L−1 gibberellic acid for 144 hours. Sowing was carried out in plastic bags containing Red Latosol + Bioplant®. Moisture content, emergence percentage, emergence speed index, length and dry mass of seedlings, were evaluated. The experimental design was completely randomized in a factorial with four replications of 50 seeds each. The seed storage at 5°C and subsequent immersion in gibberellic acid was efficient to reach high percentage, emergence speed and plant growth. A. coriacea seeds showed non-deep simple morphophysiological dormancy wherein the physiological component can be overcome after the seeds are storage at 5°C for a maximum period of 53 days and subsequent immersed in exogenous GA (350 mg.L−1 for 144 hours.

Effect of storage in overcoming seed dormancy of Annona coriacea Mart. seeds.

Science.gov (United States)

Dresch, Daiane M; Scalon, Silvana P Q; Masetto, Tathiana E

2014-12-01

The aim of this study was to evaluate the effect of pre-treatments on overcoming dormancy of A. coriacea seeds. Seeds were processed and stored in polyethylene bags at temperatures of at -18°C (42% RH), 5°C (34% RH), 15°C (60% RH) and 25°C (34% RH), during 0, 30, 60, 90, 120 and 150 days. After storage, seeds were immersed in 350 mg.L-1 gibberellic acid for 144 hours. Sowing was carried out in plastic bags containing Red Latosol + Bioplant®. Moisture content, emergence percentage, emergence speed index, length and dry mass of seedlings, were evaluated. The experimental design was completely randomized in a factorial with four replications of 50 seeds each. The seed storage at 5°C and subsequent immersion in gibberellic acid was efficient to reach high percentage, emergence speed and plant growth. A. coriacea seeds showed non-deep simple morphophysiological dormancy wherein the physiological component can be overcome after the seeds are storage at 5°C for a maximum period of 53 days and subsequent immersed in exogenous GA (350 mg.L-1 for 144 hours).

Combined storage system for LWR spent fuel and high-level waste

International Nuclear Information System (INIS)

Baxter, B.J.; Ganley, J.T.; Washington, J.A.

1983-01-01

The MODREX storage system consists of four basic elements: (1) the storage canister, (2) the storage module, (3) the storage cask, and (4) the transport cask. The storage canister is the heart of the system and, when used in combination with the module or either of the casks, allows the MODREX system to respond quickly to varied storage system requirements. The MODREX system can be used to hold either spent fuel assemblies or canistered solidified HLW. The ability to combine a basic storage canister with either a concrete module or a metal cask provides flexibility to meet a wide range of storage requirements. The spent fuel is stored in a dry, inert atmosphere, which essentially eliminates corrosion or deterioration of the cladding during extended storage periods. The storage canister and concrete storage module provide additional barriers against radioactivity release, enhancing long-term safety. Heat dissipation is passive, eliminating the need for additional emergency cooling systems or special redundancy. Modular, expandable construction permits minimum initial investment and capital carrying charges; additional capacity is built and paid for only as it is needed, retaining flexibility. 6 references, 2 figures, 1 table

15 CFR 2008.14 - Storage.

Science.gov (United States)

2010-01-01

... 15 Commerce and Foreign Trade 3 2010-01-01 2010-01-01 false Storage. 2008.14 Section 2008.14 Commerce and Foreign Trade Regulations Relating to Foreign Trade Agreements OFFICE OF THE UNITED STATES TRADE REPRESENTATIVE REGULATIONS TO IMPLEMENT E.O. 12065; OFFICE OF THE UNITED STATES TRADE...

Peak reduction for commercial buildings using energy storage

Science.gov (United States)

Chua, K. H.; Lim, Y. S.; Morris, S.

2017-11-01

Battery-based energy storage has emerged as a cost-effective solution for peak reduction due to the decrement of battery’s price. In this study, a battery-based energy storage system is developed and implemented to achieve an optimal peak reduction for commercial customers with the limited energy capacity of the energy storage. The energy storage system is formed by three bi-directional power converter rated at 5 kVA and a battery bank with capacity of 64 kWh. Three control algorithms, namely fixed-threshold, adaptive-threshold, and fuzzy-based control algorithms have been developed and implemented into the energy storage system in a campus building. The control algorithms are evaluated and compared under different load conditions. The overall experimental results show that the fuzzy-based controller is the most effective algorithm among the three controllers in peak reduction. The fuzzy-based control algorithm is capable of incorporating a priori qualitative knowledge and expertise about the load characteristic of the buildings as well as the useable energy without over-discharging the batteries.

Multi-Level Bitmap Indexes for Flash Memory Storage

Energy Technology Data Exchange (ETDEWEB)

Wu, Kesheng; Madduri, Kamesh; Canon, Shane

2010-07-23

Due to their low access latency, high read speed, and power-efficient operation, flash memory storage devices are rapidly emerging as an attractive alternative to traditional magnetic storage devices. However, tests show that the most efficient indexing methods are not able to take advantage of the flash memory storage devices. In this paper, we present a set of multi-level bitmap indexes that can effectively take advantage of flash storage devices. These indexing methods use coarsely binned indexes to answer queries approximately, and then use finely binned indexes to refine the answers. Our new methods read significantly lower volumes of data at the expense of an increased disk access count, thus taking full advantage of the improved read speed and low access latency of flash devices. To demonstrate the advantage of these new indexes, we measure their performance on a number of storage systems using a standard data warehousing benchmark called the Set Query Benchmark. We observe that multi-level strategies on flash drives are up to 3 times faster than traditional indexing strategies on magnetic disk drives.

Underground storage of carbon dioxide

Energy Technology Data Exchange (ETDEWEB)

Tanaka, Shoichi [Univ. of Tokyo, Hongo, Bunkyo-ku (Japan)

1993-12-31

Desk studies on underground storage of CO{sub 2} were carried out from 1990 to 1991 fiscal years by two organizations under contract with New Energy and Indestrial Technology Development Organization (NEDO). One group put emphasis on application of CO{sub 2} EOR (enhanced oil recovery), and the other covered various aspects of underground storage system. CO{sub 2} EOR is a popular EOR method in U.S. and some oil countries. At present, CO{sub 2} is supplied from natural CO{sub 2} reservoirs. Possible use of CO{sub 2} derived from fixed sources of industries is a main target of the study in order to increase oil recovery and storage CO{sub 2} under ground. The feasibility study of the total system estimates capacity of storage of CO{sub 2} as around 60 Gton CO{sub 2}, if worldwide application are realized. There exist huge volumes of underground aquifers which are not utilized usually because of high salinity. The deep aquifers can contain large amount of CO{sub 2} in form of compressed state, liquefied state or solution to aquifer. A preliminary technical and economical survey on the system suggests favorable results of 320 Gton CO{sub 2} potential. Technical problems are discussed through these studies, and economical aspects are also evaluated.

7 CFR 51.309 - Condition after storage or transit.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Condition after storage or transit. 51.309 Section 51... STANDARDS) United States Standards for Grades of Apples Condition After Storage Or Transit § 51.309 Condition after storage or transit. Decay, scald, or any other deterioration which may have developed on...

Optical information storage

Energy Technology Data Exchange (ETDEWEB)

Woike, T [Koeln Univ., Inst. fuer Kristallography, Koeln (Germany)

1996-11-01

In order to increase storage capacity and data transfer velocity by about three orders of magnitude compared to CD or magnetic disc it is necessary to work with optical techniques, especially with holography. About 100 TByte can be stored in a waver of an area of 50 cm{sup 2} via holograms which corresponds to a density of 2.10{sup 9} Byte/mm{sup 2}. Every hologram contains data of 1 MByte, so that parallel-processing is possible for read-out. Using high-speed CCD-arrays a read-out velocity of 1 MByte/{mu}sec can be reached. Further, holographic technics are very important in solid state physics. We will discuss the existence of a space charge field in Sr{sub 1-x}Ba{sub x}Nb{sub 2}O{sub 6} doped with cerium and the physical properties of metastable states, which are suited for information storage. (author) 19 figs., 9 refs.

Pocket Size Solid State FLASH and iPOD Drives for gigabyte storage, display and transfer of digital medical images: an introduction

International Nuclear Information System (INIS)

Sankaran, A.

2008-01-01

The transition of radiological imaging from analog to digital was closely followed by the development of the Picture Archiving and Communication (PACS) system. Concomitantly, multidimensional imaging ( 4D and 5D, for motion and functional studies on 3D images) have presented new challenges, particularly in handling gigabyte size images from CT, MRI and PET scanners, which generate thousands of images. The storage and analysis of these images necessitate expensive image workstations. This paper highlights the recent innovations in mass storage, display and transfer of images, using miniature/pocket size solid state FLASH and iPOD drives

Lipid peroxidation and seed emergency in progenies of the yellow passion fruit plant

Directory of Open Access Journals (Sweden)

João Paulo Bestete de Oliveira

2012-09-01

Full Text Available The objective was to evaluate the percentage of emergency plantlets and lipid peroxidation in seeds of 29 half-sib progenies of yellow passion fruit (Passiflora edulis Sims. after 24 months under storage. The experimental design was completely randomized, with four replications of 50 seeds each, from which the treatments were the progenies (1-29. The evaluation of the percent plantlet emergency was accomplished at 14 and 28 days after sowing. The lipid peroxidation of the seeds was expressed as malondialdehyde (MDA content that was determined by the TBARS method. Approximately 21% of those half-sib progenies maintained the viability of their seeds for twenty-four months under storage. The results point out a remarkable genetic variability for vigor and emergency of the yellow passion fruit plantlets, with occurrence of individuals with high and other ones with low capacity to maintaining the physiologic quality of their seeds after storage.

China, the United States, and competition for resources that enable emerging technologies

Science.gov (United States)

Gulley, Andrew L.; Nassar, Nedal T.; Xun, Sean

2018-01-01

Historically, resource conflicts have often centered on fuel minerals (particularly oil). Future resource conflicts may, however, focus more on competition for nonfuel minerals that enable emerging technologies. Whether it is rhenium in jet engines, indium in flat panel displays, or gallium in smart phones, obscure elements empower smarter, smaller, and faster technologies, and nations seek stable supplies of these and other nonfuel minerals for their industries. No nation has all of the resources it needs domestically. International trade may lead to international competition for these resources if supplies are deemed at risk or insufficient to satisfy growing demand, especially for minerals used in technologies important to economic development and national security. Here, we compare the net import reliance of China and the United States to inform mineral resource competition and foreign supply risk. Our analysis indicates that China relies on imports for over half of its consumption for 19 of 42 nonfuel minerals, compared with 24 for the United States—11 of which are common to both. It is for these 11 nonfuel minerals that competition between the United States and China may become the most contentious, especially for those with highly concentrated production that prove irreplaceable in pivotal emerging technologies.

Complex Metal Hydrides for hydrogen storage and solid-state ion conductors

DEFF Research Database (Denmark)

Payandeh GharibDoust, SeyedHosein

and electricity in batteries. However, both hydrogen and electricity must be stored in a very dense way to be useful, e.g. for mobile applications. Complex metal hydrides have high hydrogen density and have been studied during the past twenty years in hydrogen storage systems. Moreover, they have shown high ionic...... conductivities which promote their application as solid electrolytes in batteries. This dissertation presents the synthesis and characterization of a variety of complex metal hydrides and explores their hydrogen storage properties and ionic conductivity. Five halide free rare earth borohydrides RE(BH4)3, (RE...... = La, Ce, Pr, Nd, Er) have been synthesized, which pave the way for studying the polymorphic transition in these compounds, obtaining new bimetallic borohydrides and designing new reactive hydride composites with improved hydrogen storage capacities. Two novel polymorphs of Pr(BH4)3 are identified...

Energy storage deployment and innovation for the clean energy transition

Science.gov (United States)

Kittner, Noah; Lill, Felix; Kammen, Daniel M.

2017-09-01

The clean energy transition requires a co-evolution of innovation, investment, and deployment strategies for emerging energy storage technologies. A deeply decarbonized energy system research platform needs materials science advances in battery technology to overcome the intermittency challenges of wind and solar electricity. Simultaneously, policies designed to build market growth and innovation in battery storage may complement cost reductions across a suite of clean energy technologies. Further integration of R&D and deployment of new storage technologies paves a clear route toward cost-effective low-carbon electricity. Here we analyse deployment and innovation using a two-factor model that integrates the value of investment in materials innovation and technology deployment over time from an empirical dataset covering battery storage technology. Complementary advances in battery storage are of utmost importance to decarbonization alongside improvements in renewable electricity sources. We find and chart a viable path to dispatchable US$1 W-1 solar with US$100 kWh-1 battery storage that enables combinations of solar, wind, and storage to compete directly with fossil-based electricity options.

A solar receiver-storage modular cascade based on porous ceramic structures for hybrid sensible/thermochemical solar energy storage

OpenAIRE

Agrafiotis, Christos; de Oliveira, Lamark; Roeb, Martin; Sattler, Christian

2016-01-01

The current state-of-the-art solar heat storage concept in air-operated Solar Tower Power Plants is to store the solar energy provided during on-sun operation as sensible heat in porous solid materials that operate as recuperators during off-sun operation. The technology is operationally simple; however its storage capacity is limited to 1.5 hours. An idea for extending this capacity is to render this storage concept from “purely” sensible to “hybrid” sensible/ thermochemical one, via coating...

7 CFR 51.1309 - Condition after storage or transit.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Condition after storage or transit. 51.1309 Section 51... STANDARDS) United States Standards for Winter Pears 1 Condition After Storage Or Transit § 51.1309 Condition after storage or transit. Decay, scald or other deterioration which may have developed on pears after...

7 CFR 51.1268 - Condition after storage or transit.

Science.gov (United States)

2010-01-01

... 7 Agriculture 2 2010-01-01 2010-01-01 false Condition after storage or transit. 51.1268 Section 51... STANDARDS) United States Standards for Summer and Fall Pears 1 Condition After Storage Or Transit § 51.1268 Condition after storage or transit. Decay, scald, or other deterioration which may have developed on pears...

Emergency Medical Services Public Health Implications and Interim Guidance for the Ebola Virus in the United States

Directory of Open Access Journals (Sweden)

Christopher E. McCoy

2014-11-01

Full Text Available The 25th known outbreak of the Ebola Virus Disease (EVD is now a global public health emergency and the World Health Organization (WHO has declared the epidemic to be a Public Health Emergency of International Concern (PHEIC. Since the first cases of the West African epidemic were reported in March 2014, there has been an increase in infection rates of over 13,000% over a 6-month period. The Ebola virus has now arrived in the United States and public health professionals, doctors, hospitals, Emergency Medial Services Administrators, Medical Directors, and policy makers have been working with haste to develop strategies to prevent the disease from reaching epidemic proportions. Prehospital care providers (emergency medical technicians and paramedics and medical first responders (including but not limited to firefighters and law enforcement are the healthcare systems front lines when it comes to first medical contact with patients outside of the hospital setting. Risk of contracting Ebola can be particularly high in this population of first responders if the appropriate precautions are not implemented. This article provides a brief clinical overview of the Ebola Virus Disease and provides a comprehensive summary of the Center for Disease Control and Prevention’s Interim Guidance for Emergency Medical Services (EMS Systems and 9-1-1 Public Safety Answering Points (PSAPS for Management of Patients with Known of Suspected Ebola Virus Disease in the United States. [West J Emerg Med. 2014;15(7:-0.

Compliance with federal and state regulations regarding the emergency response plan and physical security plan at the Oregon State TRIGA reactor

International Nuclear Information System (INIS)

Johnson, A.G.; Ringle, J.C.; Anderson, T.V.

1976-01-01

Recent legislative actions within the State of Oregon have had a significant impact upon the OSU TRIGA Emergency Response Plan, and to a lesser extent upon the Physical Security Plan. These state imposed changes will be reviewed in light of existing federal requirements. With the upcoming acquisition of FLIP fuel in August 1976, NRC required several major changes to the existing Physical Security Plan. Within the limitations of public disclosure, these changes will be contrasted to the present plan. (author)

Center for Hydrogen Storage.

Science.gov (United States)

2013-06-01

The main goals of this project were to (1) Establish a Center for Hydrogen Storage Research at Delaware State University for the preparation and characterization of selected complex metal hydrides and the determination their suitability for hydrogen ...

Emerging Robust Heterostructure of MoS2-rGO for High-Performance Supercapacitors.

Science.gov (United States)

Saraf, Mohit; Natarajan, Kaushik; Mobin, Shaikh M

2018-05-16

The intermittent nature of renewable energy resources has led to a continuous mismatch between energy demand and supply. A possible solution to overcome this persistent problem is to design appropriate energy-storage materials. Supercapacitors based on different nanoelectrode materials have emerged as one of the promising storage devices. In this work, we investigate the supercapacitor properties of a molybdenum disulfide-reduced graphene oxide (rGO) heterostructure-based binder-free electrode, which delivered a high specific capacitance (387.6 F g -1 at 1.2 A g -1 ) and impressive cycling stability (virtually no loss up to 1000 cycles). In addition, the possible role of rGO in the composite toward synergistically enhanced supercapacitance has been highlighted. Moreover, an attempt has been made to correlate the electrochemical impedance spectroscopy studies with the voltammetric analyses. The performance exceeds that of the reported state-of-the-art structures.

Considerations for Disposition of Dry Cask Storage System Materials at End of Storage System Life

International Nuclear Information System (INIS)

Howard, Rob; Van den Akker, Bret

2014-01-01

Dry cask storage systems are deployed at nuclear power plants for used nuclear fuel (UNF) storage when spent fuel pools reach their storage capacity and/or the plants are decommissioned. An important waste and materials disposition consideration arising from the increasing use of these systems is the management of the dry cask storage systems' materials after the UNF proceeds to disposition. Thermal analyses of repository design concepts currently under consideration internationally indicate that waste package sizes for the geologic media under consideration may be significantly smaller than the canisters being used for on-site dry storage by the nuclear utilities. Therefore, at some point along the UNF disposition pathway, there could be a need to repackage fuel assemblies already loaded into the dry storage canisters currently in use. In the United States, there are already over 1650 of these dry storage canisters deployed and approximately 200 canisters per year are being loaded at the current fleet of commercial nuclear power plants. There is about 10 cubic meters of material from each dry storage canister system that will need to be dispositioned. The concrete horizontal storage modules or vertical storage overpacks will need to be reused, re-purposed, recycled, or disposed of in some manner. The empty metal storage canister/cask would also have to be cleaned, and decontaminated for possible reuse or recycling or disposed of, likely as low-level radioactive waste. These material disposition options can have impacts of the overall used fuel management system costs. This paper will identify and explore some of the technical and interface considerations associated with managing the dry cask storage system materials. (authors)

1992 Tier Two emergency and hazardous chemical inventory

International Nuclear Information System (INIS)

1993-03-01

This report is a compilation of data on emergency and hazardous chemicals stored at the Hanford Reservation. The report lists name or chemical description, physical and health hazards, inventories and storage location

Storage of radioactive wastes

International Nuclear Information System (INIS)

1992-07-01

Even if the best waste minimization measures are undertaken throughout radioisotope production or usage, significant radioactive wastes arise to make management measures essential. For developing countries with low isotope usage and little or no generation of nuclear materials, it may be possible to handle the generated waste by simply practicing decay storage for several half-lives of the radionuclides involved, followed by discharge or disposal without further processing. For those countries with much larger facilities, longer lived isotopes are produced and used. In this situation, storage is used not only for decay storage but also for in-process retention steps and for the key stage of interim storage of conditioned wastes pending final disposal. The report will serve as a technical manual providing reference material and direct step-by-step know-how to staff in radioisotope user establishments and research centres in the developing Member States without nuclear power generation. Considerations are limited to the simpler storage facilities. The restricted quantities and low activity associated with the relevant wastes will generally permit contact-handling and avoid the need for shielding requirements in the storage facilities or equipment used for handling. A small quantity of wastes from some radioisotope production cells and from reactor cooling water treatment may contain sufficient short lived activity from activated corrosion products to require some separate decay storage before contact-handling is suitable. 16 refs, 12 figs, 8 tabs

Potential problem areas: extended storage of low-level radioactive waste

Energy Technology Data Exchange (ETDEWEB)

Siskind, B.

1985-01-01

If a state or regional compact does not have adequate disposal capacity for low-level radioactive waste (LLRW), then extended storage of certain LLRW may be necessary. The Nuclear Regulatory Commission (NRC) has contracted with Brookhaven National Laboratory to address the technical issues of extended storage. The dual objectives of this study are (1) to provide practical technical assessments for NRC to consider in evaluating specific proposals for extended storage and (2) to help ensure adequate consideration by NRC, Agreement States, and licensees of potential problems that may arise from existing or proposed extended storage practices. Storage alternatives are considered in order to characterize the likely storage environments for these wastes. In particular, the range of storage alternatives considered and being implemented by the nuclear power plant utilities is described. The properties of the waste forms and waste containers are discussed. An overview is given of the performance of the waste package and its contents during storage (e.g., radiolytic gas generation, corrosion) and of the effects of extended storage on the performance of the waste package after storage (e.g., radiation-induced embrittlement of polyethylene, the weakening of steel containers by corrosion). Additional information and actions required to address these concerns, including possible mitigative measures, are discussed. 26 refs., 1 tab.

Effect of Processing and Storage on RBC function in vivo

Science.gov (United States)

Doctor, Allan; Spinella, Phil

2012-01-01

Red Blood Cell (RBC) transfusion is indicated to improve oxygen delivery to tissue, and for no other purpose. We have come to appreciate that donor RBCs are fundamentally altered during processing and storage, in a fashion that both impairs oxygen transport efficacy and introduces additional risk by perturbing both immune and coagulation systems. The protean biophysical and physiologic changes in RBC function arising from storage are termed the ‘storage lesion’; many have been understood for some time; for example, we know that the oxygen affinity of stored blood rises during the storage period1 and that intracellular allosteric regulators, notably 2,3-bisphosphoglyceric acid (DPG) and ATP, are depleted during storage. Our appreciation of other storage lesion features has emerged with improved understanding of coagulation, immune and vascular signaling systems. Herein we review key features of the ‘storage lesion’. Additionally, we call particular attention to the newly appreciated role of RBCs in regulating linkage between regional blood flow and regional O2 consumption by regulating the bioavailability of key vasoactive mediators in plasma, as well as discuss how processing and storage disturbs this key signaling function and impairs transfusion efficacy. PMID:22818545

Duration of red blood cell storage and inflammatory marker generation

Science.gov (United States)

Sut, Caroline; Tariket, Sofiane; Chou, Ming Li; Garraud, Olivier; Laradi, Sandrine; Hamzeh-Cognasse, Hind; Seghatchian, Jerard; Burnouf, Thierry; Cognasse, Fabrice

2017-01-01

Red blood cell (RBC) transfusion is a life-saving treatment for several pathologies. RBCs for transfusion are stored refrigerated in a preservative solution, which extends their shelf-life for up to 42 days. During storage, the RBCs endure abundant physicochemical changes, named RBC storage lesions, which affect the overall quality standard, the functional integrity and in vivo survival of the transfused RBCs. Some of the changes occurring in the early stages of the storage period (for approximately two weeks) are reversible but become irreversible later on as the storage is extended. In this review, we aim to decipher the duration of RBC storage and inflammatory marker generation. This phenomenon is included as one of the causes of transfusion-related immunomodulation (TRIM), an emerging concept developed to potentially elucidate numerous clinical observations that suggest that RBC transfusion is associated with increased inflammatory events or effects with clinical consequence. PMID:28263172

Flexible and Stretchable Energy Storage: Recent Advances and Future Perspectives.

Science.gov (United States)

Liu, Wei; Song, Min-Sang; Kong, Biao; Cui, Yi

2017-01-01

Energy-storage technologies such as lithium-ion batteries and supercapacitors have become fundamental building blocks in modern society. Recently, the emerging direction toward the ever-growing market of flexible and wearable electronics has nourished progress in building multifunctional energy-storage systems that can be bent, folded, crumpled, and stretched while maintaining their electrochemical functions under deformation. Here, recent progress and well-developed strategies in research designed to accomplish flexible and stretchable lithium-ion batteries and supercapacitors are reviewed. The challenges of developing novel materials and configurations with tailored features, and in designing simple and large-scaled manufacturing methods that can be widely utilized are considered. Furthermore, the perspectives and opportunities for this emerging field of materials science and engineering are also discussed. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Soil moisture storage and hillslope stability

Directory of Open Access Journals (Sweden)

A. Talebi

2007-09-01

Full Text Available Recently, we presented a steady-state analytical hillslope stability model to study rain-induced shallow landslides. This model is based on kinematic wave dynamics of saturated subsurface storage and the infinite slope stability assumption. Here we apply the model to investigate the effect of neglecting the unsaturated storage on the assessment of slope stability in the steady-state hydrology. For that purpose we extend the hydrological model to compute the soil pore pressure distribution over the entire flow domain. We also apply this model for hillslopes with non-constant soil depth to compare the stability of different hillslopes and to find the critical slip surface in hillslopes with different geometric characteristics. In order to do this, we incorporate more complex approaches to compute slope stability (Janbu's non-circular method and Bishop's simplified method in the steady-state analytical hillslope stability model. We compare the safety factor (FS derived from the infinite slope stability method and the more complex approach for two cases: with and without the soil moisture profile in the unsaturated zone. We apply this extended hillslope stability model to nine characteristic hillslope types with three different profile curvatures (concave, straight, convex and three different plan shapes (convergent, parallel, divergent. Overall, we find that unsaturated zone storage does not play a critical role in determining the factor of safety for shallow and deep landslides. As a result, the effect of the unsaturated zone storage on slope stability can be neglected in the steady-state hydrology and one can assume the same bulk specific weight below and above the water table. We find that steep slopes with concave profile and convergent plan shape have the least stability. We also demonstrate that in hillslopes with non-constant soil depth (possible deep landslides, the ones with convex profiles and convergent plan shapes have

Storage outlook: winter 2000/2001 and beyond

International Nuclear Information System (INIS)

Daniel, R.

2000-01-01

An overview of the Alberta Energy Company's gas storage business is presented as part of a larger discussion of the changing dynamics of the gas storage business. A review of storage inventories in both Canada and the United States are said to be lower than normal, therefore the possibility of increased buying pressure by local distribution companies and critically low inventories in case of a 'high winter draw' scenario are very real. With regard to the changing dynamics of the gas storage business a number of different possible scenarios are postulated such as the increased role of gas-fired power generation, greater price volatility, higher gas prices, and the effects of deregulation of the gas storage business. Implications of each of these scenarios are assessed

Hydrogen based energy storage for solar energy systems

Energy Technology Data Exchange (ETDEWEB)

Vanhanen, J.; Hagstroem, M.; Lund, P. [Helsinki Univ. of Technology, Otaniemi (Finland). Advanced Energy Systems

1998-10-01

The main technical constraint in solar energy systems which operate around the year is the lack of suitable long-term energy storage. Conventional solutions to overcome the problem of seasonal storage in PV power systems are to use oversized batteries as a seasonal energy storage, or to use a diesel back-up generator. However, affordable lead-acid batteries are not very suitable for seasonal energy storage because of a high self-discharge rate and enhanced deterioration and divergence of the single cells during prolonged periods of low state of charge in times of low irradiation. These disadvantages can be avoided by a back-up system, e.g. a diesel generator, which car supply energy to the loads and charge the battery to the full state of charge to avoid the above mentioned disadvantages. Unfortunately, diesel generators have several disadvantages, e.g. poor starting reliability, frequent need for maintenance and noise

Answering the request for emergency assistance worldwide. The Incident and Emergency Centre (IEC)

International Nuclear Information System (INIS)

2007-01-01

In 2005, the IAEA announced the establishment of a fully integrated Incident and Emergency Centre (IEC). The functions of the IEC include coordinating prompt assistance to requesting States in the case of a nuclear security incident. As the global focal point for international preparedness, communication and response to nuclear and radiological incidents or emergencies irrespective of their cause, the IEC stands at the centre of coordinating effective and efficient activities worldwide. The IEC's work includes the evaluation of emergency plans and assistance in their development. The Centre also develops accident classifications based on plant conditions and supports effective communication between neighbouring countries. In addition, it develops various response procedures and facilitates national exercises on response to reactor emergencies. This includes training a broad range of IAEA staff to respond to emergencies as well as training of external experts. Response to incidents and emergencies can involve the exchange of information, provision of advice and/or the coordination of field response. In order to coordinate a global response, the IEC hosts a Response Assistance Network (RANET) under which Member States, Parties to the Emergency Conventions and relevant international organizations are able to register their response capabilities. This network aims to facilitate assistance in case of a nuclear or radiological incident or emergency in a timely and effective manner. An important component of the global emergency response system is the notification and reporting arrangements and systems operated by the IEC. The IEC operates systems that are reliable and secure. Member States, Non-Member States and international organizations have historically reported events and requests for assistance to the IAEA through the ENATOM arrangements using the ENAC web site, phone or fax. Under these arrangements, States have nominated Competent Authorities and National Warning

Rechargeable dual-metal-ion batteries for advanced energy storage.

Science.gov (United States)

Yao, Hu-Rong; You, Ya; Yin, Ya-Xia; Wan, Li-Jun; Guo, Yu-Guo

2016-04-14

Energy storage devices are more important today than any time before in human history due to the increasing demand for clean and sustainable energy. Rechargeable batteries are emerging as the most efficient energy storage technology for a wide range of portable devices, grids and electronic vehicles. Future generations of batteries are required to have high gravimetric and volumetric energy, high power density, low price, long cycle life, high safety and low self-discharge properties. However, it is quite challenging to achieve the above properties simultaneously in state-of-the-art single metal ion batteries (e.g. Li-ion batteries, Na-ion batteries and Mg-ion batteries). In this contribution, hybrid-ion batteries in which various metal ions simultaneously engage to store energy are shown to provide a new perspective towards advanced energy storage: by connecting the respective advantages of different metal ion batteries they have recently attracted widespread attention due to their novel performances. The properties of hybrid-ion batteries are not simply the superposition of the performances of single ion batteries. To enable a distinct description, we only focus on dual-metal-ion batteries in this article, for which the design and the benefits are briefly discussed. We enumerate some new results about dual-metal-ion batteries and demonstrate the mechanism for improving performance based on knowledge from the literature and experiments. Although the search for hybrid-ion batteries is still at an early age, we believe that this strategy would be an excellent choice for breaking the inherent disadvantages of single ion batteries in the near future.

Analysis of inland crude oil spill threats, vulnerabilities, and emergency response in the midwest United States.

Science.gov (United States)

Brody, Thomas M; Di Bianca, Paisly; Krysa, Jan

2012-10-01

Although coastal oil spills tend to be highly publicized, crude oil spills in the United States affect inland areas relatively often. Spills to inland areas often affect sensitive environments and can have greater impacts to health and welfare than spills to coastal areas. For these reasons, the authors investigated inland crude oil spill threats, vulnerabilities, and emergency response in the midwestern U.S. states of Illinois, Indiana, Michigan, Minnesota, Ohio, and Wisconsin. These states work with the Region 5 Offices of the U.S. Environmental Protection Agency. Region 5's geospatial data in the Inland Sensitivity Atlas were turned into metrics indicating inland crude oil spill threats and vulnerabilities among the Region's sub-watersheds. These threats and vulnerabilities were weighted using data from the National Response Center and the Department of Energy's Environmental Restoration Priority System. The locations of the Region's emergency responders were geocoded in GIS. The GIS calculated the emergency response times to the Region's sub-watersheds. The resulting scatter plots are connected to the sub-watersheds in the map so stakeholders can (1) see the outlying sub-watersheds of concern and (2) better understand how reducing threats and better response time can reduce the risk of inland crude oil spills. Published 2012. This article is a U.S. Government work and is in the public domain in the U.S.A.

Heat pumps combined with cold storage; Warmtepompen gecombineerd met koudeopslag

Energy Technology Data Exchange (ETDEWEB)

Van Ingen, M.A. [Techniplan Adviseurs, Rotterdam (Netherlands)

1999-09-01

The architects of the new Nike head office building in Hilversum, Netherlands, opted for a heat pump combined with a cold storage system. The most efficient design was found to be a single central location for the production of heat and cold, with distribution lines to each of the five buildings. The cold storage system provides direct cooling and indirect heating: the heat pump raises the low-temperature heat from the cold storage to a usable temperature (augmented by district heating when necessary). In addition, the heat pump generates cold as a by-product in winter, which can be stored in the sources system and utilised during the following summer. The heat pump can also be used for cooling, for peak load supply and for any short-term storage requirement in emergencies

Energy storage financing :

Energy Technology Data Exchange (ETDEWEB)

Baxter, Richard

2016-08-01

Project financing is emerging as the linchpin for the future health, direction, and momentum of the energy storage industry. Market leaders have so far relied on selffunding or captive lending arrangements to fund projects. New lenders are proceeding hesitantly as they lack a full understanding of the technology, business, and credit risks involved in this rapidly changing market. The U.S. Department of Energy is poised to play a critical role in expanding access to capital by reducing the barriers to entry for new lenders, and providing trusted analytical benchmarks to better judge and price the risk in systematic ways.

Emergency radiological monitoring and analysis United States Federal Radiological Monitoring and Assessment Center

International Nuclear Information System (INIS)

Thome, D.J.

1994-01-01

The United States Federal Radiological Emergency Response Plan (FRERP) provides the framework for integrating the various Federal agencies responding to a major radiological emergency. Following a major radiological incident the FRERP authorizes the creation of the Federal Radiological Monitoring and Assessment Center (FRMAC). The FRMAC is established to coordinate all Federal agencies involved in the monitoring and assessment of the off-site radiological conditions in support of the impacted states and the Lead Federal Agency (LFA). Within the FRMAC, the Monitoring and Analysis Division is responsible for coordinating all FRMAC assets involved in conducting a comprehensive program of environmental monitoring, sampling, radioanalysis and quality assurance. This program includes: (1) Aerial Radiological Monitoring - Fixed Wing and Helicopter, (2) Field Monitoring and Sampling, (3) Radioanalysis - Mobile and Fixed Laboratories, (4) Radiation Detection Instrumentation - Calibration and Maintenance, (5) Environmental Dosimetry, and (6) An integrated program of Quality Assurance. To assure consistency, completeness and the quality of the data produced, a methodology and procedures handbook is being developed. This paper discusses the structure, assets and operations of FRMAC monitoring and analysis and the content and preparation of this handbook

Well Integrity for Natural Gas Storage in Depleted Reservoirs and Aquifers

Energy Technology Data Exchange (ETDEWEB)

Freifeld, Barry M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Oldenburg, Curtis M. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Jordan, Preston [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Pan, Lehua [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Perfect, Scott [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Morris, Joseph [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); White, Joshua [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bauer, Stephen [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Blankenship, Douglas [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Roberts, Barry [Sandia National Lab. (SNL-NM), Albuquerque, NM (United States); Bromhal, Grant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Glosser, Deborah [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Wyatt, Douglas [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Rose, Kelly [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

2016-09-02

National Laboratories Well Integrity Work Group One of the primary areas that the Task Force is studying is integrity of natural gas wells at storage facilities. The DOE Office of Fossil Energy (FE) took the lead in this area and asked scientists and engineers from the National Energy Technology Laboratory (NETL), Lawrence Livermore National Laboratory (LLNL), Sandia National Laboratories (SNL), and Lawrence Berkeley National Laboratory (LBNL)) to form a Work Group to address this area. This Work Group is an expansion of the original “Lab Team” comprising scientists and engineers from SNL, LLNL, and LBNL which was formed to support the State of California’s response to the Aliso Canyon incident and operated under the Governor of California’s Aliso Canyon Emergency Order (1/6/2016). The Lab Team played a key role in advising the State of California’s Department of Conservation (DOC) in its oversight of SoCalGas during and after the incident.

Smoothing-based compressed state Kalman filter for joint state-parameter estimation: Applications in reservoir characterization and CO2 storage monitoring

Science.gov (United States)

Li, Y. J.; Kokkinaki, Amalia; Darve, Eric F.; Kitanidis, Peter K.

2017-08-01

The operation of most engineered hydrogeological systems relies on simulating physical processes using numerical models with uncertain parameters and initial conditions. Predictions by such uncertain models can be greatly improved by Kalman-filter techniques that sequentially assimilate monitoring data. Each assimilation constitutes a nonlinear optimization, which is solved by linearizing an objective function about the model prediction and applying a linear correction to this prediction. However, if model parameters and initial conditions are uncertain, the optimization problem becomes strongly nonlinear and a linear correction may yield unphysical results. In this paper, we investigate the utility of one-step ahead smoothing, a variant of the traditional filtering process, to eliminate nonphysical results and reduce estimation artifacts caused by nonlinearities. We present the smoothing-based compressed state Kalman filter (sCSKF), an algorithm that combines one step ahead smoothing, in which current observations are used to correct the state and parameters one step back in time, with a nonensemble covariance compression scheme, that reduces the computational cost by efficiently exploring the high-dimensional state and parameter space. Numerical experiments show that when model parameters are uncertain and the states exhibit hyperbolic behavior with sharp fronts, as in CO2 storage applications, one-step ahead smoothing reduces overshooting errors and, by design, gives physically consistent state and parameter estimates. We compared sCSKF with commonly used data assimilation methods and showed that for the same computational cost, combining one step ahead smoothing and nonensemble compression is advantageous for real-time characterization and monitoring of large-scale hydrogeological systems with sharp moving fronts.

Extended storage of low-level radioactive waste: potential problem areas

International Nuclear Information System (INIS)

Siskind, B.; Dougherty, D.R.; MacKenzie, D.R.

1985-12-01

If a state or state compact does not have adequate disposal capacity for low-level radioactive waste (LLRW) by 1986 as required by the Low-Level Waste Policy Act, then extended storage of certain LLRW may be necessary. In this report, extended storage of LLRW is considered in order to determine for the Nuclear Regulatory Commission areas of concern and actions recommended to resolve these concerns. The focus is on the properties and performance of the waste form and waste container. Storage alternatives are considered in order to characterize the likely storage environments for these wastes. The areas of concern about extended storage of LLRW are grouped into two categories: (1) Performance of the waste form and/or container during storage, e.g., radiolytic gas generation, radiation-enhanced degradation of polymeric materials, and corrosion. (2) Effects of extended storage on the properties of the waste form and/or container that are important after storage (e.g., radiation-induced embrittlement of high-density polyethylene and the weakening of steel containers resulting from corrosion). A discussion is given of additional information and actions required to address these concerns

76 FR 69729 - Pesticide Emergency Exemptions; Agency Decisions and State and Federal Agency Crisis Declarations

Science.gov (United States)

2011-11-09

...; Agency Decisions and State and Federal Agency Crisis Declarations AGENCY: Environmental Protection Agency... following form: Crisis, public health, quarantine, or specific. EPA has also listed denied emergency... or public health purposes. These are rarely requested. 3. A ``crisis exemption'' is initiated by a...

New concept for ARS dry spent fuel storage

International Nuclear Information System (INIS)

Doroszlai, P.G.K.; Johanson, N.W.; Patak, H.N.

1980-01-01

The dry fully passive and modular away-from-reactor (AFR) storage concept has been presented before for a size of 1500 to 3000 MTHM. Here it is suggested that the same concept is applicable for a small AR storage facility of 200 MTHM. Detailed investigations and feasibility studies have shown this concept to be economically interesting. Dry storage in the proposed concept has some other inherent advantages: spent fuel is stored in a dry and inert atmosphere, where no corrosion nor determination of cladding is to be expected during extended storage periods; storage canister and the silo concrete are additional barriers against activity release and increase therefore the security for long term safety; there are only passive systems involved where the heat is dissipated by natural convection and there is no need for additional emergency systems or special redundancy; concept of AR storage should be relatively easily licensed, as all requirements or constructions are well known standards of engineering; this storage concept creates no secondary waste nor contamination making decomissioning simple after retransfer of spent fuel canisters; manpower requirements for operation and maintenance is very small; operating costs are estimated to be some 2 US $/kg U (1980); investment costs are calculated to be 96 US $/kg U (May 1980) for a total size of 200 MTHM stored

Kinetic Storage as an Energy Management System

International Nuclear Information System (INIS)

Garcia-Tabares, L.

2007-01-01

The possibility of storing energy is increasingly important and necessary. The reason is that storage modifies the basic equation of the energy production balance which states that the power produced should equal the power consumed. When there is a storage device in the grid, this equation is modified such that, in the new balance, the energy produced should equal the algebraic sum of the energy consumed and the energy stored (positive in storage phase and negative when released). This means that the generation profile can be uncoupled from the consumption profile, with the resulting improvement of efficiency. Even small-sized storage systems can be very effective. (Author) 10 refs

Methods for Analyzing the Economic Value of Concentrating Solar Power with Thermal Energy Storage

Energy Technology Data Exchange (ETDEWEB)

Denholm, Paul [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jorgenson, Jennie [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Miller, Mackay [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Zhou, Ella [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Wang, Caixia [State Grid Energy Research Inst., Beijing (China)

2015-07-20

Concentrating solar power with thermal energy storage (CSP-TES) provides multiple quantifiable benefits compared to CSP without storage or to solar photovoltaic (PV) technology, including higher energy value, ancillary services value, and capacity value. This report describes modeling approaches to quantifying these benefits that have emerged through state-level policymaking in the United States as well as the potential applicability of these methods in China. The technical potential for CSP-TES in China is significant, but deployment has not yet achieved the targets established by the Chinese government. According to the 12th Five Year Plan for Renewable Energy (2011-2015), CSP was expected to reach 1 GW by 2015 and 3 GW by 2020 in China, yet as of December 2014, deployment totaled only 13.8 MW. One barrier to more rapid deployment is the lack of an incentive specific to CSP, such as a feed-in tariff. The 13th Five Year Plan for Solar Generation (2016-2020), which is under development, presents an opportunity to establish a feed-in tariff specific to CSP. This report, produced under the auspices of the U.S.-China Renewable Energy Partnership, aims to support the development of Chinese incentives that advance CSP deployment goals.

Bioinspired fractal electrodes for solar energy storages.

Science.gov (United States)

Thekkekara, Litty V; Gu, Min

2017-03-31

Solar energy storage is an emerging technology which can promote the solar energy as the primary source of electricity. Recent development of laser scribed graphene electrodes exhibiting a high electrical conductivity have enabled a green technology platform for supercapacitor-based energy storage, resulting in cost-effective, environment-friendly features, and consequent readiness for on-chip integration. Due to the limitation of the ion-accessible active porous surface area, the energy densities of these supercapacitors are restricted below ~3 × 10 -3  Whcm -3 . In this paper, we demonstrate a new design of biomimetic laser scribed graphene electrodes for solar energy storage, which embraces the structure of Fern leaves characterized by the geometric family of space filling curves of fractals. This new conceptual design removes the limit of the conventional planar supercapacitors by significantly increasing the ratio of active surface area to volume of the new electrodes and reducing the electrolyte ionic path. The attained energy density is thus significantly increased to ~10 -1  Whcm -3 - more than 30 times higher than that achievable by the planar electrodes with ~95% coulombic efficiency of the solar energy storage. The energy storages with these novel electrodes open the prospects of efficient self-powered and solar-powered wearable, flexible and portable applications.

Special file on the storage of energies

International Nuclear Information System (INIS)

Signoret, Stephane; Kim, Caroline; Bohlinger, Philippe; Petitot, Pauline; Mary, Olivier; Guilhem, Jean

2017-01-01

After brief presentations of current research and industrial activities, a first article comments the new impetus of storage technologies and projects due to regulatory and legal evolutions associated with the French law on energy transition. Self-consumption and flexibility systems in distribution networks are practical factors of this evolution. Benefits provided by energy storage are notably outlined. The next articles present several examples: a decentralised heat storage in Brest, a flywheel plant by Levisys. An article then discusses the technological and commercial aspects of the battle in this sector for the French majors (EDF, Engie, Total). An article comments the emergence and development of a range of solutions for energy storage in case of self-consumption. The next article briefly presents the Elsa project (financed by the EU) which gives a second life to electric vehicle batteries by developing an energy storage and control solution for professionals. A system developed by French researchers is briefly presented: it aims at producing electricity, at storing it, and at using it to supply isolated autonomous systems. The idea developed in a published study is then discussed: to use electric vehicle batteries to store the intermittent energy produced by renewable sources. The last article comments the integration by Enedis of intelligent devices into the grid

Bioinspired fractal electrodes for solar energy storages

Science.gov (United States)

Thekkekara, Litty V.; Gu, Min

2017-03-01

Solar energy storage is an emerging technology which can promote the solar energy as the primary source of electricity. Recent development of laser scribed graphene electrodes exhibiting a high electrical conductivity have enabled a green technology platform for supercapacitor-based energy storage, resulting in cost-effective, environment-friendly features, and consequent readiness for on-chip integration. Due to the limitation of the ion-accessible active porous surface area, the energy densities of these supercapacitors are restricted below ~3 × 10-3 Whcm-3. In this paper, we demonstrate a new design of biomimetic laser scribed graphene electrodes for solar energy storage, which embraces the structure of Fern leaves characterized by the geometric family of space filling curves of fractals. This new conceptual design removes the limit of the conventional planar supercapacitors by significantly increasing the ratio of active surface area to volume of the new electrodes and reducing the electrolyte ionic path. The attained energy density is thus significantly increased to ~10-1 Whcm-3- more than 30 times higher than that achievable by the planar electrodes with ~95% coulombic efficiency of the solar energy storage. The energy storages with these novel electrodes open the prospects of efficient self-powered and solar-powered wearable, flexible and portable applications.

SXLS storage ring design

International Nuclear Information System (INIS)

Anon.

1991-01-01

X-ray lithography has emerged as a strong candidate to meet the demands of ever finer linewidths on integrated circuits, particularly for linewidths less than .25 microns. Proximity printing X-ray lithography makes use of soft X-rays to shadow print an image of a mask onto a semiconductor wafer to produce integrated circuits. To generate the required X-rays in sufficient quantities to make commercial production viable, electron storage rings have been proposed as the soft X-ray sources. Existing storage rings have been used to do the initial development work and the success of these efforts has led the lithographers to request that new rings be constructed that are dedicated to X-ray lithography. As a result of a series of workshops held at BNL [10.3] which were attended by both semiconductor and accelerator scientists, the following set of zeroth order specifications' on the light and electron beam of a storage ring for X-ray lithography were developed: critical wavelength of light: λ c = 6 to 10 angstroms, white light power: P = 0.25 to 2.5 watts/mrad, horizontal collection angle per port: θ = 10 to 50 mrad, electron beam sizes: σ x ∼ σ y y ' < 1 mrad

Energy storage system for a pulsed DEMO

International Nuclear Information System (INIS)

Lucas, J.; Cortes, M.; Mendez, P.; Hayward, J.; Maisonnier, D.

2007-01-01

Several designs have been proposed for the DEMO fusion reactor. Some of them are working in a non-steady state mode. Since a power plant should be able to deliver to the grid a constant power, this challenge must be solved. Energy storage is required at a level of 250 MWh e with the capability of delivering a power of 1 GWe. A review of different technologies for energy storage is made. Thermal energy storage (TES), fuel cells and other hydrogen storage, compressed air storage, water pumping, batteries, flywheels and supercapacitors are the most promising solutions to energy storage. Each one is briefly described in the paper, showing its basis, features, advantages and disadvantages for this application. The conclusion of the review is that, based on existing technology, thermal energy storage using molten salts and a system based on hydrogen storage are the most promising candidates to meet the requirements of a pulsed DEMO. These systems are investigated in more detail together with an economic assessment of each

State legislative developments in radioactive materials transportation, July 1, 1995--June 30, 1996

International Nuclear Information System (INIS)

Goehring, J.B.; Reed, J.B.

1996-09-01

The National Conference of State Legislatures (NCSL) prepares an update on state developments in radioactive materials transportation each year. The 1996 Report on State Legislative Developments in Radioactive Materials Transportation describes activities between July 1, 1995, and June 30, 1996. Thirteen bills were introduced and are arranged in this report by state according to their status--enacted, pending or failed. The report also includes 10 New York bills introduced in 1995 that remained pending during this review period. The bills address nuclear materials transportation as well as the broader areas of hazardous materials transportation, waste storage and emergency response. Also summarized are a state legislative resolution and Federal Register notices and rule changes related to radioactive waste and hazardous materials transportation that affect states

Multi-Purpose Storage Complex description

International Nuclear Information System (INIS)

Nyman, D.H.

1993-01-01

The Multi-Purpose Storage Complex will provide interim storage of radioactive material (irradiated fuel, cesium/strontium capsules, plutonium residuals, canisters of vitrified high-level waste glass, and other radioactive material) at the Hanford Site near Richland, Washington. A Storage Preparation and Shipping Facility is included that will have the capability to stabilize failed metal fuel, segregate high-level solid waste, and package/repackage any of the materials for interim storage/final disposal or subsequent processing. Current technology, both domestic and foreign, will be adapted with the expectation that no new technology will be required. This cost-effective approach will use fuel casks, transport systems, and/or modular vaults that have been licensed in the United States. The complex will have a central control room, and appropriate safeguards and security measures will be incorporated. A specific design objective will be to minimize the amount of secondary waste

State of Charge Balancing Control of a Multi-Functional Battery Energy Storage System Based on a 11-Level Cascaded Multilevel PWM Converter

DEFF Research Database (Denmark)

Wang, Songcen; Teodorescu, Remus; Máthé, Lászlo

2015-01-01

This paper focuses on modeling and SOC (State of Charge) balancing control of lithium-ion battery energy storage system based on cascaded multilevel converter for both grid integration and electric vehicle propulsion applications. The equivalent electrical circuit model of lithium-ion battery...

Hydrogen storage in graphitic nanofibres

OpenAIRE

McCaldin, Simon Roger

2007-01-01

There is huge need to develop an alternative to hydrocarbons fuel, which does not produce CO2 or contribute to global warming - 'the hydrogen economy' is such an alternative, however the storage of hydrogen is the key technical barrier that must be overcome. The potential of graphitic nanofibres (GNFs) to be used as materials to allow the solid-state storage of hydrogen has thus been investigated. This has been conducted with a view to further developing the understanding of the mechanism(s) ...

How the University of Texas system responded to the need for interim storage of low-level radioactive waste materials.

Science.gov (United States)

Emery, Robert J

2012-11-01

Faced with the prospect of being unable to permanently dispose of low-level radioactive wastes (LLRW) generated from teaching, research, and patient care activities, component institutions of the University of Texas System worked collaboratively to create a dedicated interim storage facility to be used until a permanent disposal facility became available. Located in a remote section of West Texas, the University of Texas System Interim Storage Facility (UTSISF) was licensed and put into operation in 1993, and since then has provided safe and secure interim storage for up to 350 drums of dry solid LLRW at any given time. Interim storage capability provided needed relief to component institutions, whose on-site waste facilities could have possibly become overburdened. Experiences gained from the licensing and operation of the site are described, and as a new permanent LLRW disposal facility emerges in Texas, a potential new role for the storage facility as a surge capacity storage site in times of natural disasters and emergencies is also discussed.

Savannah River Site TIER TWO report 1992: Emergency and Hazardous Chemical Inventory report

International Nuclear Information System (INIS)

Still, G.O.

1993-03-01

This report is a compilation of data on emergency and hazardous chemicals stored at the Savannah River Site. The report lists quantities of materials, general types of storage containment, types of storage conditions (pressure and temperature), and other information of relevance for particular materials

Light qubit storage and retrieval using macroscopic atomic ensembles

International Nuclear Information System (INIS)

Sherson, J.; Soerensen, A. S.; Polzik, E. S.; Fiurasek, J.; Moelmer, K.

2006-01-01

We present an experimentally feasible protocol for the complete storage and retrieval of arbitrary light states in an atomic quantum memory using the Faraday interaction between light and matter. Our protocol relies on multiple passages of a single light pulse through the atomic ensemble without the impractical requirement of kilometer-long delay lines between the passages. A time-dependent interaction strength enables the storage and retrieval of states with arbitrary pulse shapes. The fidelity approaches unity exponentially without squeezed or entangled initial states, as illustrated by calculations for a photonic qubit

SIMULATION FRAMEWORK FOR REGIONAL GEOLOGIC CO{sub 2} STORAGE ALONG ARCHES PROVINCE OF MIDWESTERN UNITED STATES

Energy Technology Data Exchange (ETDEWEB)

Sminchak, Joel

2012-09-30

This report presents final technical results for the project Simulation Framework for Regional Geologic CO{sub 2} Storage Infrastructure along Arches Province of the Midwest United States. The Arches Simulation project was a three year effort designed to develop a simulation framework for regional geologic carbon dioxide (CO{sub 2}) storage infrastructure along the Arches Province through development of a geologic model and advanced reservoir simulations of large-scale CO{sub 2} storage. The project included five major technical tasks: (1) compilation of geologic, hydraulic and injection data on Mount Simon, (2) development of model framework and parameters, (3) preliminary variable density flow simulations, (4) multi-phase model runs of regional storage scenarios, and (5) implications for regional storage feasibility. The Arches Province is an informal region in northeastern Indiana, northern Kentucky, western Ohio, and southern Michigan where sedimentary rock formations form broad arch and platform structures. In the province, the Mount Simon sandstone is an appealing deep saline formation for CO{sub 2} storage because of the intersection of reservoir thickness and permeability. Many CO{sub 2} sources are located in proximity to the Arches Province, and the area is adjacent to coal fired power plants along the Ohio River Valley corridor. Geophysical well logs, rock samples, drilling logs, and geotechnical tests were evaluated for a 500,000 km{sup 2} study area centered on the Arches Province. Hydraulic parameters and historical operational information was also compiled from Mount Simon wastewater injection wells in the region. This information was integrated into a geocellular model that depicts the parameters and conditions in a numerical array. The geologic and hydraulic data were integrated into a three-dimensional grid of porosity and permeability, which are key parameters regarding fluid flow and pressure buildup due to CO{sub 2} injection. Permeability data

New perspectives on potential hydrogen storage materials using high pressure.

Science.gov (United States)

Song, Yang

2013-09-21

In addressing the global demand for clean and renewable energy, hydrogen stands out as the most suitable candidate for many fuel applications that require practical and efficient storage of hydrogen. Supplementary to the traditional hydrogen storage methods and materials, the high-pressure technique has emerged as a novel and unique approach to developing new potential hydrogen storage materials. Static compression of materials may result in significant changes in the structures, properties and performance that are important for hydrogen storage applications, and often lead to the formation of unprecedented phases or complexes that have profound implications for hydrogen storage. In this perspective article, 22 types of representative potential hydrogen storage materials that belong to four major classes--simple hydride, complex hydride, chemical hydride and hydrogen containing materials--were reviewed. In particular, their structures, stabilities, and pressure-induced transformations, which were reported in recent experimental works together with supporting theoretical studies, were provided. The important contextual aspects pertinent to hydrogen storage associated with novel structures and transitions were discussed. Finally, the summary of the recent advances reviewed and the insight into the future research in this direction were given.

Incidence and Cost of Ankle Sprains in United States Emergency Departments

Science.gov (United States)

Shah, Shweta; Thomas, Abbey C.; Noone, Joshua M.; Blanchette, Christopher M.; Wikstrom, Erik A.

2016-01-01

Background: Ankle sprains represent a common injury in emergency departments, but little is known about common complications, procedures, and charges associated with ankle sprains in emergency departments. Hypothesis: There will be a higher incidence of ankle sprains among younger populations (≤25 years old) and in female patients. Complications and procedures will differ between ankle sprain types. Lateral ankle sprains will have lower health care charges relative to medial and high ankle sprains. Study Design: Descriptive epidemiological study. Level of Evidence: Level 3. Methods: A cross-sectional study of the 2010 Nationwide Emergency Department Sample was conducted. Outcomes such as charges, complications, and procedures were compared using propensity score matching between lateral and medial as well as lateral and high ankle sprains. Results: The sample contained 225,114 ankle sprains. Female patients sustained more lateral ankle sprains (57%). After propensity score adjustment, lateral sprains incurred greater charges than medial ankle sprains (median [interquartile range], $1008 [$702-$1408] vs $914 [$741-$1108]; P sprain of the foot (2.96% vs 0.70%, P ankle sprain events. Among procedures, medial ankle sprains were more likely to include diagnostic radiology (97.91% vs 83.62%, P ankle sprains (0.87% vs 2.79%, P ankle sprains than lateral ankle sprains (24 [6.06%] vs 1 [0.25%], P Ankle sprain emergency department visits account for significant health care charges in the United States. Age- and sex-related differences persist among the types of ankle sprains. Clinical Relevance: The health care charges associated with ankle sprains indicate the need for additional preventive measures. There are age- and sex-related differences in the prevalence of ankle sprains that suggest these demographics may be risk factors for ankle sprains. PMID:27474161

Entropy, pricing and productivity of pumped-storage

Science.gov (United States)

Karakatsanis, Georgios; Tyralis, Hristos; Tzouka, Katerina

2016-04-01

Pumped-storage constitutes today a mature method of bulk electricity storage in the form of hydropower. This bulk electricity storability upgrades the economic value of hydropower as it may mitigate -or even neutralize- stochastic effects deriving from various geophysical and socioeconomic factors, which produce numerous load balance inefficiencies due to increased uncertainty. Pumped-storage further holds a key role for unifying intermittent renewable (i.e. wind, solar) units with controllable non-renewable (i.e. nuclear, coal) fuel electricity generation plants into integrated energy systems. We develop a set of indicators for the measurement of performance of pumped-storage, in terms of the latter's energy and financial contribution to the energy system. More specifically, we use the concept of entropy in order to examine: (1) the statistical features -and correlations- of the energy system's intermittent components and (2) the statistical features of electricity demand prediction deviations. In this way, the macroeconomics of pumped-storage emerges naturally from its statistical features (Karakatsanis et al. 2014). In addition, these findings are combined to actual daily loads. Hence, not only the amount of energy harvested from the pumped-storage component is expected to be important, but the harvesting time as well, as the intraday price of electricity varies significantly. Additionally, the structure of the pumped-storage market proves to be a significant factor as well for the system's energy and financial performance (Paine et al. 2014). According to the above, we aim at postulating a set of general rules on the productivity of pumped-storage for (integrated) energy systems. Keywords: pumped-storage, storability, economic value of hydropower, stochastic effects, uncertainty, energy systems, entropy, intraday electricity price, productivity References 1. Karakatsanis, Georgios et al. (2014), Entropy, pricing and macroeconomics of pumped-storage systems

Spent fuel storage requirements, 1991--2040

International Nuclear Information System (INIS)

1991-12-01

Historical inventories of spent fuel are combined with US Department of Energy (DOE) projections of future discharges from commercial nuclear reactors in the United States to provide estimates of spent fuel storage requirements over the next 50 years, through the year 2040. The needs for storage capacity beyond that presently available in the pools are estimated. These estimates incorporate the maximum capacities within current and planned in-pool storage facilities and any planned transshipments of fuel to other reactors or facilities. Existing and future dry storage facilities are also discussed. Historical data through December 1990 are derived from the 1991 Form RW-859 data survey of nuclear utilities. Projected discharges through the end of reactor life are based on DOE estimates of future nuclear capacity, generation, and spent fuel discharges

Emergency Contraception: a survey of Hospital Emergency Departments Staffs

Directory of Open Access Journals (Sweden)

Marco Bo

2011-06-01

Full Text Available The World Health Organization defines emergency contraception (EC as a means to prevent unwanted pregnancy. In countries where EC is dispensed behind the counter, emergency departments are a preferred point of care for its prescription and dispensing. In light of this situation and as no studies on emergency contraception in emergency departments in Italy have been conducted to date, this study was designed with a view to analyze the responses of emergency room physicians in relation to their prescribing habits and knowledge about the drug and in relation to frequency and profile of women arriving for care at hospital emergency departments in Piedmont and requesting prescription for the morning-after pill. This cross-sectional survey involved 29 hospital emergency departments in Piedmont where no gynecologists are on active duty. The survey instrument was a 24-item questionnaire. Analysis of responses revealed that in the physicians’ opinion the vast majority of requests came from Italian nationals (97% ranging in age from 18 to 30 years (76%, single and not cohabiting with a partner (60%, and nulliparous (64.0%. Women mostly request EC for first-time and the most common reasons were condom breakage or slippage. Just over half the physicians (52% stated that emergency contraception prescription was not an appropriate part of care provided at an emergency department and 72% stated they felt uneasy about prescribing emergency contraception. The survey also revealed gaps in physician knowledge about the pharmacokinetic and pharmacodynamic properties of emergency contraception pills.

Emergency Contraception: a survey of Hospital Emergency Departments Staffs

Directory of Open Access Journals (Sweden)

Marco Bo

2011-03-01

Full Text Available The World Health Organization defines emergency contraception (EC as a means to prevent unwanted pregnancy. In countries where EC is dispensed behind the counter, emergency departments are a preferred point of care for its prescription and dispensing. In light of this situation and as no studies on emergency contraception in emergency departments in Italy have been conducted to date, this study was designed with a view to analyze the responses of emergency room physicians in relation to their prescribing habits and knowledge about the drug and in relation to frequency and profile of women arriving for care at hospital emergency departments in Piedmont and requesting prescription for the morning-after pill. This cross-sectional survey involved 29 hospital emergency departments in Piedmont where no gynecologists are on active duty. The survey instrument was a 24-item questionnaire. Analysis of responses revealed that in the physicians’ opinion the vast majority of requests came from Italian nationals (97% ranging in age from 18 to 30 years (76%, single and not cohabiting with a partner (60%, and nulliparous (64.0%. Women mostly request EC for first-time and the most common reasons were condom breakage or slippage. Just over half the physicians (52% stated that emergency contraception prescription was not an appropriate part of care provided at an emergency department and 72% stated they felt uneasy about prescribing emergency contraception. The survey also revealed gaps in physician knowledge about the pharmacokinetic and pharmacodynamic properties of emergency contraception pills.

A national perspective on paleoclimate streamflow and water storage infrastructure in the conterminous United States

Science.gov (United States)

Ho, Michelle; Lall, Upmanu; Sun, Xun; Cook, Edward

2017-04-01

Large-scale water storage infrastructure in the Conterminous United States (CONUS) provides a means of regulating the temporal variability in water supply with storage capacities ranging from seasonal storage in the wetter east to multi-annual and decadal-scale storage in the drier west. Regional differences in water availability across the CONUS provides opportunities for optimizing water dependent economic activities, such as food and energy production, through storage and transportation. However, the ability to sufficiently regulate water supplies into the future is compromised by inadequate monitoring of non-federally-owned dams that make up around 97% of all dams. Furthermore, many of these dams are reaching or have exceeded their economic design life. Understanding the role of dams in the current and future landscape of water requirements in the CONUS is needed to prioritize dam safety remediation or identify where redundant dams may be removed. A national water assessment and planning process is needed for addressing water requirements, accounting for regional differences in water supply and demand, and the role of dams in such a landscape. Most dams in the CONUS were designed without knowledge of devastating floods and prolonged droughts detected in multi-centennial paleoclimate records, consideration of projected climate change, nor consideration of optimal operation across large-scale regions. As a step towards informing water supply across the CONUS we present a paleoclimate reconstruction of annual streamflow across the CONUS over the past 555 years using a spatially and temporally complete paleoclimate record of summer drought across the CONUS targeting a set of US Geological Survey streamflow sites. The spatial and temporal structures of national streamflow variability are analyzed using hierarchical clustering, principal component analysis, and wavelet analyses. The reconstructions show signals of contemporary droughts such as the Dust Bowl (1930s

Communication with the Public in a Nuclear or Radiological Emergency. Emergency Preparedness and Response

International Nuclear Information System (INIS)

2012-05-01

The aim of this publication is to provide practical guidance for public information officers on the preparation for and response to a nuclear or radiological emergency, and to fulfil in part functions assigned to the IAEA in the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency (Assistance Convention), as well as meeting requirements stated in IAEA Safety Standards Series No. SF-1, Fundamental Safety Principles, and in IAEA Safety Standards No. GS-R-2, Preparedness and Response for a Nuclear or Radiological Emergency. Under Article 5(a)(ii) of the Assistance Convention, one function of the IAEA is to collect and disseminate to States Parties and Member States information concerning methodologies, techniques and results of research relating to response to nuclear or radiological emergencies. IAEA Safety Standards Series No. GS-R-2 establishes the requirements for an adequate level of preparedness for and response to a nuclear or radiological emergency in any State, and specifies that 'All practicable steps shall be taken to provide the public with useful, timely, truthful, consistent and appropriate information throughout a nuclear or radiological emergency' in the response phase. It also requires 'responding to incorrect information and rumours; and responding to requests for information from the public and from the news and information media'. This publication provides guidance in the form of action guides and information sheets that can be easily applied by a State to build a basic capability to respond to a nuclear or radiological emergency. This guidance should be adapted to fit the user State's organizational arrangements, language, terminology, concept of operation and capabilities. This publication is published as part of the IAEA's Emergency Preparedness and Response series and complements the Manual for First Responders to a Radiological Emergency in the parts related to the tasks of public information officers. It takes

Carbon storage in young growth coast redwood stands

Science.gov (United States)

Dryw A. Jones; Kevin A. O' Hara

2012-01-01

Carbon sequestration is an emerging forest management objective within California and around the world. With the passage of the California's Global Warming Solutions Act (AB32) our need to understand the dynamics of carbon sequestration and to accurately measure carbon storage is essential to insure successful implementation of carbon credit projects throughout...

Hydrogen Storage Materials for Mobile and Stationary Applications: Current State of the Art.

Science.gov (United States)

Lai, Qiwen; Paskevicius, Mark; Sheppard, Drew A; Buckley, Craig E; Thornton, Aaron W; Hill, Matthew R; Gu, Qinfen; Mao, Jianfeng; Huang, Zhenguo; Liu, Hua Kun; Guo, Zaiping; Banerjee, Amitava; Chakraborty, Sudip; Ahuja, Rajeev; Aguey-Zinsou, Kondo-Francois

2015-09-07

One of the limitations to the widespread use of hydrogen as an energy carrier is its storage in a safe and compact form. Herein, recent developments in effective high-capacity hydrogen storage materials are reviewed, with a special emphasis on light compounds, including those based on organic porous structures, boron, nitrogen, and aluminum. These elements and their related compounds hold the promise of high, reversible, and practical hydrogen storage capacity for mobile applications, including vehicles and portable power equipment, but also for the large scale and distributed storage of energy for stationary applications. Current understanding of the fundamental principles that govern the interaction of hydrogen with these light compounds is summarized, as well as basic strategies to meet practical targets of hydrogen uptake and release. The limitation of these strategies and current understanding is also discussed and new directions proposed. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Gas Storage Technology Consortium

Energy Technology Data Exchange (ETDEWEB)

Joel Morrison; Elizabeth Wood; Barbara Robuck

2010-09-30

The EMS Energy Institute at The Pennsylvania State University (Penn State) has managed the Gas Storage Technology Consortium (GSTC) since its inception in 2003. The GSTC infrastructure provided a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. The GSTC received base funding from the U.S. Department of Energy's (DOE) National Energy Technology Laboratory (NETL) Oil & Natural Gas Supply Program. The GSTC base funds were highly leveraged with industry funding for individual projects. Since its inception, the GSTC has engaged 67 members. The GSTC membership base was diverse, coming from 19 states, the District of Columbia, and Canada. The membership was comprised of natural gas storage field operators, service companies, industry consultants, industry trade organizations, and academia. The GSTC organized and hosted a total of 18 meetings since 2003. Of these, 8 meetings were held to review, discuss, and select proposals submitted for funding consideration. The GSTC reviewed a total of 75 proposals and committed co-funding to support 31 industry-driven projects. The GSTC committed co-funding to 41.3% of the proposals that it received and reviewed. The 31 projects had a total project value of $6,203,071 of which the GSTC committed $3,205,978 in co-funding. The committed GSTC project funding represented an average program cost share of 51.7%. Project applicants provided an average program cost share of 48.3%. In addition to the GSTC co-funding, the consortium provided the domestic natural gas storage industry with a technology transfer and outreach infrastructure. The technology transfer and outreach were conducted by having project mentoring teams and a GSTC website, and by working closely with the Pipeline Research Council International (PRCI) to

Demand Response and Energy Storage Integration Study

Energy Technology Data Exchange (ETDEWEB)

Ma, Ookie; Cheung, Kerry; Olsen, Daniel J.; Matson, Nance; Sohn, Michael D.; Rose, Cody M.; Dudley, Junqiao Han; Goli, Sasank; Kiliccote, Sila; Cappers, Peter; MacDonald, Jason; Denholm, Paul; Hummon, Marissa; Jorgenson, Jennie; Palchak, David; Starke, Michael; Alkadi, Nasr; Bhatnagar, Dhruv; Currier, Aileen; Hernandez, Jaci; Kirby, Brendan; O' Malley, Mark

2016-03-01

Demand response and energy storage resources present potentially important sources of bulk power system services that can aid in integrating variable renewable generation. While renewable integration studies have evaluated many of the challenges associated with deploying large amounts of variable wind and solar generation technologies, integration analyses have not yet fully incorporated demand response and energy storage resources. This report represents an initial effort in analyzing the potential integration value of demand response and energy storage, focusing on the western United States. It evaluates two major aspects of increased deployment of demand response and energy storage: (1) Their operational value in providing bulk power system services and (2) Market and regulatory issues, including potential barriers to deployment.

Pyridostimine Bromide 30mg Stability in Extended Storage Conditions

Science.gov (United States)

2017-12-03

States Pharmacopeia (USP) >. The real-life storage conditions will be determined using the International Commission for Harmonization’s (ICH) Quality ...Packaging and Storage Requirements. 4 ~ Real-life storage conditions are defined based on the International Council for Harmonisation’s (ICH) Quality ...information, including suggestions for reducing the burden, to the Department of Defense, Executive Service Directorate {0704-0188). Respondents should be

Behavior of whey protein concentrates under extreme storage conditions

Science.gov (United States)

The overseas demand for whey protein concentrates (WPC) has increased steadily in recent years. Emergency aid foods often include WPC, but shelf-life studies of whey proteins under different shipment and storage conditions have not been conducted in the last 50 yr. Microbial quality, compound form...

IAEA emergency response network ERNET. Emergency preparedness and response. Date effective: 1 December 2002

International Nuclear Information System (INIS)

2003-04-01

The Parties to the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency have undertaken to co-operate among themselves and with the IAEA in facilitating the prompt provision of assistance in the event of a nuclear accident or radiological emergency, and in minimizing the consequences and in protecting life, property and the environment from the effects of any radioactive releases. As part of the IAEA strategy for supporting such co-operation, the Secretariat of the IAEA is establishing a global Emergency Response Network (ERNET) of teams suitably qualified to respond rapidly, on a regional basis, to nuclear accidents or radiological emergencies. This manual sets out the criteria and requirements to be met by ERNET teams. It is intended for use by institutions in Member States in developing, applying and maintaining their emergency response capabilities and in implementing quality assurance programmes within the context of ERNET. The manual is worded on the assumption that a State Competent Authority designated as the body responsible for reacting to nuclear accidents or radiological emergencies which occur outside the jurisdiction of that State will be the State Contact Point for receiving requests for assistance from the IAEA under the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency

IAEA emergency response network ERNET. Emergency preparedness and response. Date effective: 1 December 2000

International Nuclear Information System (INIS)

2000-12-01

The Parties to the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency have undertaken to co-operate among themselves and with the IAEA in facilitating the prompt provision of assistance in the event of a nuclear accident or radiological emergency, and in minimizing the consequences and in protecting life, property and the environment from the effects of any radioactive releases. As part of the IAEA strategy for supporting such co-operation, the Secretariat of the IAEA is establishing a global Emergency Response Network (ERNET) of teams suitably qualified to respond rapidly, on a regional basis, to nuclear accidents or radiological emergencies. This manual sets out the criteria and requirements to be met by ERNET teams. It is intended for use by institutions in Member States in developing, applying and maintaining their emergency response capabilities and in implementing quality assurance programmes within the context of ERNET. The manual is worded on the assumption that a State Competent Authority designated as the body responsible for reacting to nuclear accidents or radiological emergencies which occur outside the jurisdiction of that State will be the State Contact Point for receiving requests for assistance from the IAEA under the Convention on Assistance in the Case of a Nuclear Accident or Radiological Emergency

Emergency Preparedness Hazards Assessment for solid waste management facilities in E-area not previously evaluated

International Nuclear Information System (INIS)

Hadlock, D.J.

1999-01-01

This report documents the facility Emergency Preparedness Hazards Assessment (EPHA) for the Solid Waste Management Department (SWMD) activities located on the Department of Energy (DOE) Savannah River Site (SRS) within E Area that are not described in the EPHAs for Mixed Hazardous Waste storage, the TRU Waste Storage Pads or the E-Area Vaults. The hazards assessment is intended to identify and analyze those hazards that are significant enough to warrant consideration in the SWMD operational emergency management program

An emerging network storage management standard: Media error monitoring and reporting information (MEMRI) - to determine optical tape data integrity

Science.gov (United States)

Podio, Fernando; Vollrath, William; Williams, Joel; Kobler, Ben; Crouse, Don

1998-01-01

Sophisticated network storage management applications are rapidly evolving to satisfy a market demand for highly reliable data storage systems with large data storage capacities and performance requirements. To preserve a high degree of data integrity, these applications must rely on intelligent data storage devices that can provide reliable indicators of data degradation. Error correction activity generally occurs within storage devices without notification to the host. Early indicators of degradation and media error monitoring 333 and reporting (MEMR) techniques implemented in data storage devices allow network storage management applications to notify system administrators of these events and to take appropriate corrective actions before catastrophic errors occur. Although MEMR techniques have been implemented in data storage devices for many years, until 1996 no MEMR standards existed. In 1996 the American National Standards Institute (ANSI) approved the only known (world-wide) industry standard specifying MEMR techniques to verify stored data on optical disks. This industry standard was developed under the auspices of the Association for Information and Image Management (AIIM). A recently formed AIIM Optical Tape Subcommittee initiated the development of another data integrity standard specifying a set of media error monitoring tools and media error monitoring information (MEMRI) to verify stored data on optical tape media. This paper discusses the need for intelligent storage devices that can provide data integrity metadata, the content of the existing data integrity standard for optical disks, and the content of the MEMRI standard being developed by the AIIM Optical Tape Subcommittee.

Commercial potential of natural gas storage in lined rock caverns (LRC)

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-11-01

The geologic conditions in many regions of the United States will not permit the development of economical high-deliverability gas storage in salt caverns. These regions include the entire Eastern Seaboard; several northern states, notably Minnesota and Wisconsin; many of the Rocky Mountain States; and most of the Pacific Northwest. In late 1997, the United States Department of Energy (USDOE) Federal Energy Technology Center engaged Sofregaz US to investigate the commercialization potential of natural gas storage in Lined Rock Caverns (LRC). Sofregaz US teamed with Gaz de France and Sydkraft, who had formed a consortium, called LRC, to perform the study for the USDOE. Underground storage of natural gas is generally achieved in depleted oil and gas fields, aquifers, and solution-mined salt caverns. These storage technologies require specific geologic conditions. Unlined rock caverns have been used for decades to store hydrocarbons - mostly liquids such as crude oil, butane, and propane. The maximum operating pressure in unlined rock caverns is limited, since the host rock is never entirely impervious. The LRC technology allows a significant increase in the maximum operating pressure over the unlined storage cavern concept, since the gas in storage is completely contained with an impervious liner. The LRC technology has been under development in Sweden by Sydkraft since 1987. The development process has included extensive technical studies, laboratory testing, field tests, and most recently includes a storage facility being constructed in southern Sweden (Skallen). The LRC development effort has shown that the concept is technically and economically viable. The Skallen storage facility will have a rock cover of 115 meters (375 feet), a storage volume of 40,000 cubic meters (250,000 petroleum barrels), and a maximum operating pressure of 20 MPa (2,900 psi). There is a potential for commercialization of the LRC technology in the United States. Two regions were studied

Energy Policy Act of 2005 and Underground Storage Tanks (USTs)

Science.gov (United States)

The Energy Policy Act of 2005 significantly affected federal and state underground storage tank programs, required major changes to the programs, and is aimed at reducing underground storage tank releases to our environment.

Major alternatives for government policies, organizational structures, and actions in civilian nuclear reactor emergency management in the United States

International Nuclear Information System (INIS)

1980-01-01

The purpose of this report is to identify and assess major alternatives for governmental policies, organizational structures, and actions in civilian nuclear reactor emergency management in the United States. The National Academy of Public Administration agreed to identify and evaluate alternatives for governmental policies, organizational structures, and actions in civilian nuclear reactor emergency management. It agreed to review present policies and practices in civilian nuclear reactor emergency management, to review selected experiences and practices of governmental agencies other than the Nuclear Regulatory Commission, and industries other than the nuclear power industry, and to identify alternatives to the present nuclear emergency system

MANAGING THE LOAD SCHEDULE OF THE ADMINISTRATIVE BUILDING TAKING INTO ACCOUNT EMERGING RISKS WHEN CONNECTING THE KINETIC ENERGY STORAGE TO THE POWER SUPPLY SYSTEM

Directory of Open Access Journals (Sweden)

S. Yu. Shevchenko

2017-12-01

Full Text Available Purpose. The purpose of the paper is to analyze load schedules of the administrative building and develop a structural scheme for connecting the kinetic energy storage in the power supply system of this building, which will allow using it as a consumer regulator, as well as a theoretical study of the risks that arise. Methodology. To conduct the research, the theory of designing internal electrical networks of buildings, the theory of plotting electric load graphs, methods of the theory of electromechanical systems and for analyzing the risk system, the T. Saati method of hierarchies were used. Results. The structure of kinetic energy storage (KES connection to the power supply system of the administrative building is developed and the structural diagram of the KES proposed for installation is given, the average daily winter and summer load schedules are presented, a set of groups and subgroups of risks and their influence on the work of the power supply system of the building are connected with the connection of the KES. Originality. For the first time, the application of the kinetic energy storage in the power supply system of the building with the analysis of emerging risks is considered, which makes it possible to improve the reliability of the developed system and the efficiency of load regulation. Practical value. The application of the proposed scheme will make it possible to use administrative buildings as load regulators of the external power supply system, and also effectively manage the load in the internal power supply system of the building.

Variation in Emergency Department vs Internal Medicine Excess Charges in the United States.

Science.gov (United States)

Xu, Tim; Park, Angela; Bai, Ge; Joo, Sarah; Hutfless, Susan M; Mehta, Ambar; Anderson, Gerard F; Makary, Martin A

2017-08-01

Uninsured and insured but out-of-network emergency department (ED) patients are often billed hospital chargemaster prices, which exceed amounts typically paid by insurers. To examine the variation in excess charges for services provided by emergency medicine and internal medicine physicians. Retrospective analysis was conducted of professional fee payment claims made by the Centers for Medicare & Medicaid Services for all services provided to Medicare Part B fee-for-service beneficiaries in calendar year 2013. Data analysis was conducted from January 1 to July 31, 2016. Markup ratios for ED and internal medicine professional services, defined as the charges submitted by the hospital divided by the Medicare allowable amount. Our analysis included 12 337 emergency medicine physicians from 2707 hospitals and 57 607 internal medicine physicians from 3669 hospitals in all 50 states. Services provided by emergency medicine physicians had an overall markup ratio of 4.4 (340% excess charges), which was greater than the markup ratio of 2.1 (110% excess charges) for all services performed by internal medicine physicians. Markup ratios for all ED services ranged by hospital from 1.0 to 12.6 (median, 4.2; interquartile range [IQR], 3.3-5.8); markup ratios for all internal medicine services ranged by hospital from 1.0 to 14.1 (median, 2.0; IQR, 1.7-2.5). The median markup ratio by hospital for ED evaluation and management procedure codes varied between 4.0 and 5.0. Among the most common ED services, laceration repair had the highest median markup ratio (7.0); emergency medicine physician review of a head computed tomographic scan had the greatest interhospital variation (range, 1.6-27.7). Across hospitals, markups in the ED were often substantially higher than those in the internal medicine department for the same services. Higher ED markup ratios were associated with hospital for-profit ownership (median, 5.7; IQR, 4.0-7.1), a greater percentage of uninsured patients seen

Expert study to select indicators of the occurrence of emerging mycotoxin hazards.

Science.gov (United States)

Kandhai, M C; Booij, C J H; Van der Fels-Klerx, H J

2011-01-01

This article describes a Delphi-based expert judgment study aimed at the selection of indicators to identify the occurrence of emerging mycotoxin hazards related to Fusarium spp. in wheat supply chains. A panel of 29 experts from 12 European countries followed a holistic approach to evaluate the most important indicators for different chain stages (growth, transport and storage, and processing) and their relative importance. After three e-mailing rounds, the experts reached consensus on the most important indicators for each of the three stages: wheat growth, transport and storage, and processing. For wheat growth, these indicators include: relative humidity/rainfall, crop rotation, temperature, tillage practice, water activity of the kernels, and crop variety/cultivar. For the transport and storage stage, they include water activity in the kernels, relative humidity, ventilation, temperature, storage capacity, and logistics. For wheat processing, indicators include quality data, fraction of the cereal used, water activity in the kernels, quality management and traceability systems, and carryover of contamination. The indicators selected in this study can be used in an identification system for the occurrence of emerging mycotoxin hazards in wheat supply chains. Such a system can be used by risk managers within governmental (related) organizations and/or the food and feed industry in order to react proactively to the occurrence of these emerging mycotoxins. © 2010 Society for Risk Analysis.

INVENTORY AND DESCRIPTION OF COMMERCIAL REACTOR FUELS WITHIN THE UNITED STATES

Energy Technology Data Exchange (ETDEWEB)

Vinson, D.

2011-03-31

There are currently 104 nuclear reactors in 31 states, operated by 51 different utilities. Operation of these reactors generates used fuel assemblies that require storage prior to final disposition. The regulatory framework within the United States (U.S.) allows for the licensing of used nuclear fuel storage facilities for an initial licensing period of up to 40 years with potential for license extensions in 40 years increments. Extended storage, for periods of up to 300 years, is being considered within the U.S. Therefore, there is an emerging need to develop the technical bases to support the licensing for long-term storage. In support of the Research and Development (R&D) activities required to support the technical bases, a comprehensive assessment of the current inventory of used nuclear fuel based upon publicly available resources has been completed that includes the most current projections of used fuel discharges from operating reactors. Negotiations with the nuclear power industry are ongoing concerning the willingness of individual utilities to provide information and material needed to complete the R&D activities required to develop the technical bases for used fuel storage for up to 300 years. This report includes a status of negotiations between DOE and industry in these regards. These negotiations are expected to result in a framework for cooperation between the Department and industry in which industry will provide and specific information on used fuel inventory and the Department will compensate industry for the material required for Research and Development and Testing and Evaluation Facility activities.

Techno-economic and life-cycle modeling and analysis of various energy storage technologies coupled with a solar photovoltaic array

Science.gov (United States)

Peterson, Brian Andrew

Renewable energies, such as wind and solar, are a growing piece of global energy consumption. The chief motivation to develop renewable energy is two-fold: reducing carbon dioxide emissions and reducing dependence on diminishing fossil fuel supplies. Energy storage is critical to the growth of renewable energy because it allows for renewably-generated electricity to be consumed at times when renewable sources are unavailable, and it also enhances power quality (maintaining voltage and frequency) on an electric grid which becomes increasingly unstable as more renewable energy is added. There are numerous means of storing energy with different advantages, but none has emerged as the clear solution of choice for renewable energy storage. This thesis attempts to explore the current and developing state of energy storage and how it can be efficiently implemented with crystalline silicon solar photovotlaics, which has a minimum expected lifetime of 25 years assumed in this thesis. A method of uniformly comparing vastly different energy storage technologies using empirical data was proposed. Energy storage technologies were compared based on both economic valuation over the system life and cradle-to-gate pollution rates for systems with electrochemical batteries. For stationary, non-space-constrained settings, lead-acid batteries proved to be the most economical. Carbon-enhanced lead-acid batteries were competitive, showing promise as an energy storage technology. Lithium-ion batteries showed the lowest pollution rate of electrochemical batteries examined, but both lithium-ion and lead-acid batteries produce comparable carbon dioxide to coal-derived electricity.

Storage Rings

International Nuclear Information System (INIS)

Fischer, W.

2010-01-01

Storage rings are circular machines that store particle beams at a constant energy. Beams are stored in rings without acceleration for a number of reasons (Tab. 1). Storage rings are used in high-energy, nuclear, atomic, and molecular physics, as well as for experiments in chemistry, material and life sciences. Parameters for storage rings such as particle species, energy, beam intensity, beam size, and store time vary widely depending on the application. The beam must be injected into a storage ring but may not be extracted (Fig. 1). Accelerator rings such as synchrotrons are used as storage rings before and after acceleration. Particles stored in rings include electrons and positrons; muons; protons and anti-protons; neutrons; light and heavy, positive and negative, atomic ions of various charge states; molecular and cluster ions, and neutral polar molecules. Spin polarized beams of electrons, positrons, and protons were stored. The kinetic energy of the stored particles ranges from 10 -6 eV to 3.5 x 10 12 eV (LHC, 7 x 10 12 eV planned), the number of stored particles from one (ESR) to 1015 (ISR). To store beam in rings requires bending (dipoles) and transverse focusing (quadrupoles). Higher order multipoles are used to correct chromatic aberrations, to suppress instabilities, and to compensate for nonlinear field errors of dipoles and quadrupoles. Magnetic multipole functions can be combined in magnets. Beams are stored bunched with radio frequency systems, and unbunched. The magnetic lattice and radio frequency system are designed to ensure the stability of transverse and longitudinal motion. New technologies allow for better storage rings. With strong focusing the beam pipe dimensions became much smaller than previously possible. For a given circumference superconducting magnets make higher energies possible, and superconducting radio frequency systems allow for efficient replenishment of synchrotron radiation losses of large current electron or positron beams

Superstorm Sandy: Emergency management staff perceptions of impact and recommendations for future preparedness, New York State.

Science.gov (United States)

Yanson, Adam; Hilts, Asante Shipp; Mack, Stephanie; Eidson, Millicent; Nguyen, Trang; Birkhead, Guthrie