Process intensification of biodiesel production by using microwave and ionic liquids as catalyst

Energy Technology Data Exchange (ETDEWEB)

Handayani, Prima Astuti [Department of Chemical Engineering, Diponegoro University (Indonesia); Chemical Engineering Program, Faculty of Engineering, Semarang State University (Indonesia); Abdullah; Hadiyanto, Dan, E-mail: hadiyanto@live.undip.ac.id [Department of Chemical Engineering, Diponegoro University (Indonesia)

2015-12-29

The energy crisis pushes the development and intensification of biodiesel production process. Biodiesel is produced by transesterification of vegetable oils or animal fats and conventionally produced by using acid/base catalyst. However, the conventional method requires longer processing time and obtains lower yield of biodiesel. The microwave has been intensively used to accelerate production process and ionic liquids has been introduced as source of catalyst. This paper discusses the overview of the development of biodiesel production through innovation using microwave irradiation and ionic liquids catalyst to increase the yield of biodiesel. The potential microwave to reduce the processing time will be discussed and compared with other energy power, while the ionic liquids as a new generation of catalysts in the chemical industry will be also discussed for its use. The ionic liquids has potential to enhance the economic and environmental aspects because it has a low corrosion effect, can be recycled, and low waste form.

Production and characterization of composite stone

International Nuclear Information System (INIS)

Leirose, G.D.; Lameiras, F.S.

2012-01-01

Composite stone is a product similar to natural granite or marble, produced with particles of these materials. This material is used like natural stone as lining. The fabrication of artificial stones using residues of banded iron formations is a promising alternative to its actual destination (storage in dam). This research aims the characterization of composite stone to prove the efficacy of this kind of processing. It was used first, natural quartz as a raw material. The patterns of the samples were confirmed by IR spectra and XRD patterns, ensuring the reproducibility of processing applied. Moreover, this material is homogeneous, with low porosity and high flexural strength, confirmed by its structural characterization. Thus, it can be affirmed that the process chosen is suitable, enabling the application of this methodology to the use of waste. (author)

Simultaneous design of ionic liquid entrainers and energy efficient azeotropic separation processes

DEFF Research Database (Denmark)

Roughton, Brock C.; Christian, Brianna; White, John

2012-01-01

A methodology and tool set for the simultaneous design of ionic liquid entrainers and azeotropic separation processes is presented. By adjusting the cation, anion, and alkyl chain length on the cation, the properties of the ionic liquid can be adjusted to design an entrainer for a given azeotropic...... mixture. Several group contribution property models available in literature have been used along with a newly developed group contribution solubility parameter model and UNIFAC model for ionic liquids (UNIFAC-IL). For a given azeotropic mixture, an ionic liquid is designed using a computer-aided molecular...... design (CAMD) method and the UNIFAC-IL model is used to screen design candidates based on minimum ionic liquid concentration needed to break the azeotrope. Once the ionic liquid has been designed, the extractive distillation column for the azeotropic mixture is designed using the driving force method...

Villamayor stone (Golden Stone) as a Global Heritage Stone Resource from Salamanca (NW of Spain)

Science.gov (United States)

Garcia-Talegon, Jacinta; Iñigo, Adolfo; Vicente-Tavera, Santiago

2013-04-01

Villamayor stone is an arkosic stone of Middle Eocene age and belongs to the Cabrerizos Sandstone Formation that comprising braided fluvial systems and paleosoils at the top of each stratigraphic sequence. The sandstone is known by several names: i) the Villamayor Stone because the quarries are located in Villamayor de Armuña village that are situated at 7 km to the North from Salamanca city; ii) the Golden Stone due to its patina that produced a ochreous/golden color on the façades of monuments of Salamanca (World Heritage City,1988) built in this Natural stone (one of the silicated rocks utilised). We present in this work, the Villamayor Stone to be candidate as Global Heritage Stone Resource. The Villamayor Stone were quarrying for the construction and ornamentation of Romanesque religious monuments as the Old Cathedral and San Julian church; Gothic (Spanish plateresc style) as the New Cathedral, San Esteban church and the sculpted façade of the Salamanca University, one of the oldest University in Europe (it had established in 1250); and this stone was one of the type of one of the most sumptuous Baroque monuments is the Main Square of the its galleries and arcades (1729). Also, this stone was used in building palaces, walls and reconstruction of Roman bridge. Currently, Villamayor Stone is being quarried by small and family companies, without a modernized processing, for cladding of the façades of the new buildings until that the construction sector was burst (in 2008 the international economic crisis). However, Villamayor Stone is the main stone material used in the city of Salamanca for the restoration of monuments and, even in small quantities when compared with just before the economic crisis, it would be of great importance for future generations protect their quarries and the craft of masonry. Villamayor Stone has several varieties from channels facies to floodplains facies, in this work the selected varieties are: i) the fine-grained stone

Special article: Horace Nelson MD, John Webster LDS--unrecognized Canadian anesthesia pioneers.

Science.gov (United States)

Craig, Douglas; Chartrand, Daniel

2014-03-01

The timing of the earliest reported ether anesthetics in early 1847, in regions to become Canada in July 1867, was examined using information from on-line and library-based sources. Previous authors had identified the first reported ether anesthetic given by a visiting American dentist in January 1847 in Saint John, New Brunswick. Nevertheless, they had reported three different anesthetics as the second occurrence - which would denote the first anesthetic given by a resident of Canada. We confirmed that there were no reports of ether anesthetics being given in Canada before that reported on January 18, 1847 in Saint John. The information available for our review indicates that the second ether anesthetic, and the first by a Canadian, was given in Montreal by a dentist, Dr. John Horatio Webster, on February 20, 1847. The surgical assistant for that operation, Dr. Horace Nelson, later reported on animal and human experiments with ether, which he had led in Montreal starting in January 1847. Earlier authors, who may not have had access to the information now available, came to incorrect conclusions about the first ether anesthetic reported to have been given by a Canadian. Current information indicates that John Webster gave the first reported anesthetic in Montreal on February 20, 1847 following experiments with ether led by Horace Nelson. Both Webster and Nelson deserve recognition as Canadian anesthesia pioneers.

Choreographing a Life: Kimberly Bolan--Taney Webster Public Library, NY

Science.gov (United States)

Library Journal, 2004

2004-01-01

When Kim Taney is not tending 80 workstations on the Webster Public Library's local area network, supervising the pages, working the reference desk, and advising libraries on how to improve teen services, she teaches ballet and choreographs her dance studio's productions. Choreography is a useful skill for someone with such a multifaceted life. As…

Process of extracting oil from stones and sands. [heating below cracking temperature and above boiling point of oil

Energy Technology Data Exchange (ETDEWEB)

Bergfeld, K

1935-03-09

A process of extracting oil from stones or sands bearing oils is characterized by the stones and sands being heated in a suitable furnace to a temperature below that of cracking and preferably slightly higher than the boiling-point of the oils. The oily vapors are removed from the treating chamber by means of flushing gas.

Modern electrochemical processes and technologies in ionic melts

Directory of Open Access Journals (Sweden)

Omelchuk A.

2003-01-01

Full Text Available An analysis of the known methods for the electrochemical purification of non-ferrous metals in ionic melts is presented. A comparative estimation of the results of the electrochemical purification of non-ferrous metals by different methods has been performed. The main regularities of the electrochemical behavior of non-ferrous metals in conventional and electrode micro-spacing electrolysis are presented. It has been found that when electrolyzing some metals, e. g. bismuth, gallium, there is either no mass exchange between the electrodes, or it occurs under filtration conditions. It has been shown that the electrode micro-spacing processes provide a high quality of non-ferrous metals purification at low specific consumption of electric power and reagents. The use of bipolar electrodes and β-alumina diaphragms hinders the transfer of metallic impurities from the anode to the cathode. The effects revealed were used to develop new processes for the separation of non-ferrous metal alloys in ionic melts; most of them have been put into practice in non-ferrous metallurgy.

Fire effects on flaked stone, ground stone, and other stone artifacts [Chapter 4

Science.gov (United States)

Krista Deal

2012-01-01

Lithic artifacts can be divided into two broad classes, flaked stone and ground stone, that overlap depending on the defining criteria. For this discussion, flaked stone is used to describe objects that cut, scrape, pierce, saw, hack, etch, drill, or perforate, and the debris (debitage) created when these items are manufactured. Objects made of flaked stone include...

Papillary Ductal Plugging is a Mechanism for Early Stone Retention in Brushite Stone Disease

DEFF Research Database (Denmark)

Williams, James C; Borofsky, Michael S; Bledsoe, Sharon B

2018-01-01

PURPOSE: Mechanisms of early stone retention in the kidney are under studied and poorly understood. To date attachment via Randall's plaque is the only widely accepted theory in this regard, which is best described in idiopathic calcium oxalate stone formers. Brushite stone formers are known...... to have distinct papillary morphology relative to calcium oxalate stone formers. As such we sought to determine whether stone attachment mechanisms in such patients may be similarly unique. MATERIALS AND METHODS: Patients undergoing percutaneous and or ureteroscopic procedures for stone removal consented...... to endoscopic renal papillary examination and individual stone collection. Each removed stone was processed using micro computerized tomography to assess the 3-dimensional microstructure and the minerals contained, and search for common structural features indicative of novel mechanisms of early growth...

Phase equilibrium in systems with ionic liquids: An example for the downstream process of the Biphasic Acid Scavenging utilizing Ionic Liquids (BASIL) process. Part I: Experimental data

International Nuclear Information System (INIS)

Sahandzhieva, Katya; Maurer, Gerd

2012-01-01

Highlights: ► Phase equilibrium for a downstream process in sustainable chemical technology. ► Biphasic Acid Scavenging Utilizing Ionic Liquids (BASIL) Process. ► SLE, LLE, and SLLE of (NaCl + water + 1-propanol + 1-MIM) and its ternary subsystems. ► Experimental phase equilibrium data at temperatures between 298 K and 333 K. - Abstract: Experimental results are presented for the (liquid + liquid), (solid + liquid) and (solid + liquid + liquid) equilibria occurring in the downstream process of a typical example for the Biphasic Acid Scavenging Utilizing Ionic Liquids (BASIL)-processes. In a BASIL process an organic base is used to catalyze a chemical reaction and, at the same time, to scavenge an acid that is an undesired side product of that reaction. The particular example of a BASIL process treated here is the reaction of 1-butanol and acetylchloride to butylacetate and hydrochloric acid, where the acid is scavenged by the organic base 1-methyl imidazole (1-MIM) resulting in the ionic liquid 1-methyl imidazolium chloride. The reaction results in a two-phase system as butylacetate and the ionic liquid reveal a large liquid–liquid miscibility gap. The organic base has to be recovered. This is commonly achieved by treating the ionic liquid–rich liquid phase with an aqueous solution of sodium hydroxide (i.e., converting the ionic liquid to the organic base) and extracting the organic base by an appropriate organic solvent (e.g., 1-propanol). The work presented here deals in experimental work with the (liquid + liquid), (solid + liquid) and (solid + liquid + liquid) phase equilibria that are encountered in such extraction processes. Experimental results are reported for temperatures between about 298 K and 333 K: for the solubility of NaCl in several solvents (1-propanol, 1-MIM), (water + 1-MIM), (1-propanol + 1-MIM), (water + 1-propanol), and (water + 1-propanol + 1-MIM) and for the (liquid + liquid) equilibrium as well as for the (solid + liquid

Hyaluronan and Stone Disease

Science.gov (United States)

Asselman, Marino

2008-09-01

Kidney stones cannot be formed as long as crystals are passed in the urine. However, when crystals are retained it becomes possible for them to aggregate and form a stone. Crystals are expected to be formed not earlier than the distal tubules and collecting ducts. Studies both in vitro and in vivo demonstrate that calcium oxalate monohydrate crystals do not adhere to intact distal epithelium, but only when the epithelium is proliferating or regenerating, so that it possesses dedifferentiated cells expressing hyaluronan, osteopontin (OPN) and their mutual receptor CD44 at the apical cell membrane. The polysaccharide hyaluronan is an excellent crystal binding molecule because of its negative ionic charge. We hypothesized that the risk for crystal retention in the human kidney would be increased when tubular cells express hyaluronan at their apical cell membrane. Two different patient categories in which nephrocalcinosis frequently occurs were studied to test this hypothesis (preterm neonates and kidney transplant patients). Hyaluronan (and OPN) expression at the luminal membrane of tubular cells indeed was observed, which preceded subsequent retention of crystals in the distal tubules. Tubular nephrocalcinosis has been reported to be associated with decline of renal function and thus further studies to extend our knowledge of the mechanisms of retention and accumulation of crystals in the kidney are warranted. Ultimately, this may allow the design of new strategies for the prevention and treatment of both nephrocalcinosis and nephrolithiasis in patients.

Lipid processing in ionic liquids

DEFF Research Database (Denmark)

Lue, Bena-Marie; Guo, Zheng; Xu, Xuebing

2007-01-01

Ionic liquids (ILs) have been touted as “green” alternatives to traditional molecular solvents and have many unique properties which make them extremely desirable substitutes. Among their most attractive properties are their lack of vapour pressure, broad liquid range, strong solvating power and ...... and the ability to tailor properties of individual ILs to meet specific requirements. This article highlights current research as well as the vast potential of ILs for use as media for reactions, separation and processing in the lipid area....

Efek Toksin T-2 terhadap Perkembangan Embrio Praimplantasi dan Fetus Mencit Swiss Webster

Directory of Open Access Journals (Sweden)

AGUS HARYONO

2007-03-01

Full Text Available T-2 toxin is a toxic and teratogenic mycotoxin produced by Fusarium tricintum which may contaminate cereal, seed, and food. The aim of this research is to find out the effects of T-2 Toxin on preimplantion embryos and fetuses of Swiss Webster mice. Pregnant female of Swiss Webster mice on 0 or 2 day of gestation was injected intraperitoneally with T-2 toxin at doses 0.05 or 0.10 mg/kg body weight (bw and the dam was observed at 3.5 and 18 days of gestation. At 0 day of gestation, embryos were arrested at one to eight cell and uncompacted morulae stages (P < 0.01 compared to control, in both 0.05 and 0.10 mg/kg bw doses. The cell numbers of late blastocyst at all treated groups were decreased significantly compared to control. At 2 day of gestation, most of embryos were arrested on compacted morulae stage at dose 0.10 mg/kg bw (P < 0.01, the late blastocyst and its cell number were dose-dependently decreased. The live fetuses decreased significantly at all dose of T-2 toxin. No external malformation occurred in the fetuses. Results showed that T-2 toxin given at preimplantation stages inhibited development of preimplantation embryos as indicated by decreased number of live fetuses. Therefore, it was grouped as embryotoxic agent but those dosages did not cause malformation of the external appearance of Swiss Webster mice fetuses.

HANFORD CONTAINERIZED CAST STONE FACILITY TASK 1 PROCESS TESTING & DEVELOPMENT FINAL TEST REPORT

Energy Technology Data Exchange (ETDEWEB)

LOCKREM, L L

2005-07-13

Laboratory testing and technical evaluation activities on Containerized Cast Stone (CCS) were conducted under the Scope of Work (SOW) contained in CH2M HILL Hanford Group, Inc. (CHG) Contract No. 18548 (CHG 2003a). This report presents the results of testing and demonstration activities discussed in SOW Section 3.1, Task I--''Process Development Testing'', and described in greater detail in the ''Containerized Grout--Phase I Testing and Demonstration Plan'' (CHG, 2003b). CHG (2003b) divided the CCS testing and evaluation activities into six categories, as follows: (1) A short set of tests with simulant to select a preferred dry reagent formulation (DRF), determine allowable liquid addition levels, and confirm the Part 2 test matrix. (2) Waste form performance testing on cast stone made from the preferred DRF and a backup DRF, as selected in Part I, and using low activity waste (LAW) simulant. (3) Waste form performance testing on cast stone made from the preferred DRF using radioactive LAW. (4) Waste form validation testing on a selected nominal cast stone formulation using the preferred DRF and LAW simulant. (5) Engineering evaluations of explosive/toxic gas evolution, including hydrogen, from the cast stone product. (6) Technetium ''getter'' testing with cast stone made with LAW simulant and with radioactive LAW. In addition, nitrate leaching observations were drawn from nitrate leachability data obtained in the course of the Parts 2 and 3 waste form performance testing. The nitrate leachability index results are presented along with other data from the applicable activity categories.

Toxicity of ionic liquids: eco(cyto)activity as complicated, but unavoidable parameter for task-specific optimization.

Science.gov (United States)

Egorova, Ksenia S; Ananikov, Valentine P

2014-02-01

Rapid progress in the field of ionic liquids in recent decades led to the development of many outstanding energy-conversion processes, catalytic systems, synthetic procedures, and important practical applications. Task-specific optimization emerged as a sharpening stone for the fine-tuning of structure of ionic liquids, which resulted in unprecedented efficiency at the molecular level. Ionic-liquid systems showed promising opportunities in the development of green and sustainable technologies; however, the chemical nature of ionic liquids is not intrinsically green. Many ionic liquids were found to be toxic or even highly toxic towards cells and living organisms. In this Review, we show that biological activity and cytotoxicity of ionic liquids dramatically depend on the nature of a biological system. An ionic liquid may be not toxic for particular cells or organisms, but may demonstrate high toxicity towards another target present in the environment. Thus, a careful selection of biological activity data is a must for the correct assessment of chemical technologies involving ionic liquids. In addition to the direct biological activity (immediate response), several indirect effects and aftereffects are of primary importance. The following principal factors were revealed to modulate toxicity of ionic liquids: i) length of an alkyl chain in the cation; ii) degree of functionalization in the side chain of the cation; iii) anion nature; iv) cation nature; and v) mutual influence of anion and cation. Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

Do stone size and impaction influence therapeutic approach to proximal ureteral stones?

Directory of Open Access Journals (Sweden)

Radulović Slobodan

2009-01-01

Full Text Available Background/Aim. Primary therapeutic approach to lumbar ureteral stones is still contraversial. The aim of the study was to investigate the influence of stone impaction and size on the effectiveness of proximal ureteral stone lithotripsy. Methods. A total of 123 patients with proximal ureteral stones were investigated in this prospective study performed in a 10- month period. The patients were divided into the group I - 86 patients treated with extracorporeal shock wave lithotripsy (ESWL and the group II - 37 patients treated with 'Swiss' Lithoclast. In the group I, 49 stones (57% were classified as impacted, while 20 stones (23.3% were larger than 100 mm2. In the group II, 26 stones (70.3% were impacted, and 11 stones (29.7% were larger than 100 mm2. Stones were defined as impacted by the radiographic, echosonographic as well as endoscopic findings in the group II of patients. Stone size was presented in mm2. Chemical composition of stones were almost the same in both groups of the patients. Results. Generally, there was no statistically significant difference in the treatment success between the groups. However, stones larger than 100 mm2 were statistically more successfully treated endoscopically, while there was no statistical difference in the treatment success of impacted stones between these two groups. Conclusion. ESWL can by considered as primary first therapeutic approach in treatment of all proximal ureteral stones except for stones larger than 100 mm2 that should primarily be treated endoscopically.

Lower Lip Reconstruction after Wide Excision of a Malignancy with Barrel-Shaped Excision or the Webster Modification of the Bernard Operation

Directory of Open Access Journals (Sweden)

Hyung Joon Seo

2013-01-01

Full Text Available BackgroundBecause there are numerous methods for reconstruction of the lower lip, it is not easy to choose the optimal method. In choosing the surgical method for lower lip reconstruction, we obtained acceptable outcomes based on our treatment strategy, which included either a barrel-shaped excision or the Webster modification of the Bernard operation. We report on the surgical outcomes based on our treatment strategy.MethodsThis study included 26 patients who underwent lower lip reconstructive surgery from September 1996 to September 2010. The operation was done using either a barrel-shaped excision or the Webster modification, considering the location of the defect, the size of the defect, and the amount of residual tissue on the lateral side of the vermilion after excision.ResultsIn our series, 3 patients underwent a single barrel-shaped excision, and nine patients underwent a double barrel-shaped excision. In addition, the unilateral Webster modification was performed on in 6 patients, and there were eight cases of bilateral Webster modification. All of the patients except one were satisfied with the postoperative shape of the lip. In one case both recurrence and dehiscence occurred. One patient had a good postoperative lip shape, but had difficulty wearing a denture, and also underwent commissuroplasty. Furthermore, there were two patients who complained of drooling, and 4 with paresthesia.ConclusionsA soft tissue defect resulting from wide excision of a lower lip malignancy can be successfully reconstructed using only one of two surgical methods: the barrel-shaped excision or the Webster modification of the Bernard operation.

Co-melting technology in resource recycling of sludge derived from stone processing.

Science.gov (United States)

Hu, Shao-Hua; Hu, Shen-Chih; Fu, Yen-Pei

2012-12-01

Stone processing sludge (SPS) is a by-product of stone-processing wastewater treatment; it is suitable for use as a raw material for making artificial lightweight aggregates (ALWAs). In this study, boric acid was utilized as a flux to lower sintering temperature. The formation of the viscous glassy phase was observed by DTA curve and changes in XRD patterns. Experiments were conducted to find the optimal combination of sintering temperature, sintering time, and boric acid dosage to produce an ALWA of favorable characteristics in terms of water absorption, bulk density, apparent porosity, compressive strength and weight loss to satisfy Taiwan's regulatory requirements for construction and insulation materials. Optimal results gave a sintering temperature of 850 degrees C for 15 min at a boric acid dosage of 15% by weight of SPS. Results for ALWA favorable characteristics were: 0.21% (water absorption), 0.35% (apparent porosity), 1.67 g/cm3 (bulk density), 66.94 MPa (compressive strength), and less than 0.1% (weight loss).

The effects of ozone and NOx on the deterioration of calcareous stone

International Nuclear Information System (INIS)

Massey, S.W.

1999-01-01

This paper looks at the changes in urban air quality and the effect on building materials with particular regard to their deterioration arising from pollution due to vehicles. The paper aims to review basic information on the likely effect of NO x and ozone on calcareous building materials (limestone, marble, dolomite, calcareous cemented sandstone) by examining experimental and fieldwork relating to the principle reaction of the oxidation of the sulphite to sulphate. NO 2 is only one of many possible oxidants present in the urban and rural environment. A brief synopsis of the effects of other oxidants and inhibitors is given along with a review of the processes involved in aqueous phase oxidation, which seems to be the phase where the reactions take place. Controlling factors in the reaction and oxidation of sulphite to sulphate are the type and porosity of the stone, the level of humidity, the nature of the oxidants and to a lesser extent the presence of other extraneous reactants, e.g. metal oxides, chlorine and ammonia salts. For freshly cut stone unpolished marble is much less reactive than porous limestone and the degree of activity has different relative humidity thresholds. Reaction of the stone with the gaseous compounds occurs during the process of absorption onto the surface. The oxidation is accelerated at the gas-water interface by the presence of NO x , and seems to depend on the NO 2 component but it is clear that NO x is only one of many possible oxidants in the urban and rural environments. Correlation studies of the damage to stone materials are unlikely to pick up the effects of NO x due to the nature of their duration and the rather transient nature of the appearance and removal of nitrates on the stone. Presence of other oxidants and catalysts such as H 2 O 2 , O 2 (catalysed by Fe 3+ and Mn 2+ ), OH, HSO 5 - , SO 4 2- , O 3 , HO 2 , NO 2 - , NO 3 , O 2 - and PAN, plus the fact that the reactions are pH and ionic strength sensitive, add greatly

Calcium oxalate stone and gout.

Science.gov (United States)

Marickar, Y M Fazil

2009-12-01

Gout is well known to be produced by increased uric acid level in blood. The objective of this paper is to assess the relationship between gout and calcium oxalate stone formation in the humans. 48 patients with combination of gout and calcium oxalate stone problem were included. The biochemical values of this group were compared with 38 randomly selected uric acid stone patients with gout, 43 stone patients with gout alone, 100 calcium oxalate stone patients without gout and 30 controls, making a total of 259 patients. Various biochemical parameters, namely serum calcium, phosphorus and uric acid and 24-h urine calcium, phosphorus, uric acid, oxalate, citrate and magnesium were analysed. ANOVA and Duncan's multiple-range tests were performed to assess statistical significance of the variations. The promoters of stone formation, namely serum calcium (P stone patients and gouty calcium oxalate stone patients compared to the non-gouty patients and controls. Urine oxalate (P stones patients. The inhibitor urine citrate (P stone gouty patients, followed by the gouty uric acid stone formers and gouty calcium oxalate stone patients. The high values of promoters, namely uric acid and calcium in the gouty stone patients indicate the tendency for urinary stone formation in the gouty stone patients. There is probably a correlation between gout and calcium oxalate urinary stone. We presume this mechanism is achieved through the uric acid metabolism. The findings point to the summation effect of metabolic changes in development of stone disease.

Effect of stone coverage on soil erosion

Science.gov (United States)

Jomaa, S.; Barry, D. A.; Heng, B. P.; Brovelli, A.; Sander, G. C.; Parlange, J.

2010-12-01

Soil surface coverage has a significant impact on water infiltration, runoff and soil erosion yields. In particular, surface stones protect the soils from raindrop detachment, they retard the overland flow therefore decreasing its sediment transport capacity, and they prevent surface sealing. Several physical and environmental factors control to what extent stones on the soil surface modify the erosion rates and the related hydrological response. Among the most important factors are the moisture content of the topsoil, stone size, emplacement, coverage density and soil texture. Owing to the different inter-related processes, there is ambiguity concerning the quantitative effect of stones, and process-based understanding is limited. Experiments were performed (i) to quantify how stone features affect sediment yields, (ii) to understand the local effect of isolated surface stones, that is, the changes of the soil particle size distribution in the vicinity of a stone and (iii) to determine how stones attenuate the development of surface sealing and in turn how this affects the local infiltration rate. A series of experiments using the EPFL 6-m × 2-m erosion flume were conducted at different rainfall intensities (28 and 74 mm h-1) and stone coverage (20 and 40%). The total sediment concentration, the concentration of the individual size classes and the flow discharge were measured. In order to analyze the measurements, the Hairsine and Rose (HR) erosion model was adapted to account for the shielding effect of the stone cover. This was done by suitably adjusting the parameters based on the area not covered by stones. It was found that the modified HR model predictions agreed well with the measured sediment concentrations especially for the long time behavior. Changes in the bulk density of the topsoil due to raindrop-induced compaction with and without stone protection revealed that the stones protect the upper soil surface against the structural seals resulting in

Design of Separation Processes with Ionic Liquids

DEFF Research Database (Denmark)

Peng-noo, Worawit; Kulajanpeng, Kusuma; Gani, Rafiqul

2015-01-01

A systematic methodology for screening and designing of Ionic Liquid (IL)-based separation processes is proposed and demonstrated using several case studies of both aqueous and non-aqueous systems, for instance, ethanol + water, ethanol + hexane, benzene + hexane, and toluene + methylcyclohexane....... The best four ILs of each mixture are [mmim][dmp], [emim][bti], [emim][etso4] and [hmim][tcb], respectively. All of them were used as entrainers in the extractive distillation. A process simulation of each system was carried out and showed a lower both energy requirement and solvent usage as compared...

Reuse of residual sludge from stone-processing: differences and similarities between sludge coming from carbonate and silicate stones

Science.gov (United States)

Careddu, Nicola; Antonella Dino, Giovanna

2015-04-01

Residual sludge coming from dimension stone working activities represents a serious environmental and economic problem both for Stone Industry and citizens. Indeed, most of time, residual sludge is landfilled because of the difficulties to recover it; such difficulties are mainly connected to local legislation and a lack of proper protocols. In general, it is possible to individuate two different categories of sludge: residual sludge coming from carbonate rocks (CS) and those coming from silicate rocks (SS). Both of them are characterised by a very fine size distribution. CS is composed mainly by the same compounds of the processed stones (marble, limestone, travertine). The reason of this is related to the very slow wear of diamond tools during processing which entails a negligible content of heavy metals. CS becomes very interesting, from an economic point of view, when it has a CaCO3 grade > 95 %. On the contrary, SS is characterised by high heavy metal and TPH content. Residual sludge from the processing of silicate rocks can be split in three different sub-categories, depending on the way they are produced, and in particular: sludge from gangsaw using abrasive steel shot (GSS), sludge from multi diamond-saw block cutter (DBC), and mixed sludge (MS) from gangsaw and block cutter. These three sub-categories show different problems connected to heavy metal content, indeed on the one hand GSS is characterised by a high percentage of Ni, Cr, Cu, etc., on the other hand DBC is characterised by Co and Cu high content. In general, sludge, management of which in Italy is administered in accordance with the Italian Legislative Decree 152/06, can be used as waste from for environmental restoration or for cement plants. Several researches investigate the possible reuse of these materials but, at present time, there is no evidence of its systematic recovery as "recycled product" or "by-product". On the basis of the results of these researches it is possible to highlight

Role of clay constituents in stone decay processes

Directory of Open Access Journals (Sweden)

Veniale, F.

2001-12-01

Full Text Available Stone alterability/durability is depending upon a number of intrinsic and extrinsic factors among which "clay minerals" constituents, either diffused throughout the stone framework or as coating-filling of void spaces, can play an important role. Swelling-shrinking and aggregation-disaggregation phenomena occurring by interaction of argillaceous particles with water and other fluids can cause destructuration of the stone resulting in a variety of pathologies. Also salt crystallization which is depending on fluid transfer, moisture evaporation and ion concentration in the circulating solutions, can be influenced by clay mineral reactivity. Furthermore, saline solutions can drastically change the clay minerals behaviour, resulting in enhanced "osmotic" swelling and variations in clay aggregation geometry; these phenomena resulting in significant stone damage. Case histories concerning several lithotypes used for monumental buildings and artistic manufacts are reported for showing the role of different clay mineral types in determining trend and intensity of decay processes.

Varios factores, tanto intrínsecos como extrínsecos, pueden condicionar la alterabilidad/durabilidad de materiales pétreos. Entre ellos, la presencia de minerales arcillosos, bien como constituyentes difusos o recubriendo-rellenando huecos, puede jugar un papel importante. El resultado de la interacción de las partículas arcillosas y el agua (u otros fluidos da lugar a patologías que son consecuencia de una serie de daños internos producidos por las continuas variaciones plásticas, asociadas a parámetros físicos y cristaloquímicos de este tipo de minerales. Entre los que podemos citar la desestructuración de la piedra (bien por agregación-desagregación de las partículas arcillosas o por procesos de hinchamiento-contracción que está asociado, por ejemplo, con la cristalización de sales, producida por la transferencia de fluidos a su través, o a

Engineering scale demonstration of a prospective Cast Stone process

International Nuclear Information System (INIS)

Cozzi, A.; Fowley, M.; Hansen, E.; Fox, K.; Miller, D.; Williams, M.

2014-01-01

This report documents an engineering-scale demonstration with non-radioactive simulants that was performed at SRNL using the Scaled Continuous Processing Facility (SCPF) to fill an 8.5 ft container with simulated Cast Stone grout. The Cast Stone formulation was chosen from the previous screening tests. Legacy salt solution from previous Hanford salt waste testing was adjusted to correspond to the average composition generated from the Hanford Tank Waste Operation Simulator (HTWOS). The dry blend materials, ordinary portland cement (OPC), Class F fly ash, and ground granulated blast furnace slag (GGBFS or BFS), were obtained from Lafarge North America in Pasco, WA. Over three days, the SCPF was used to fill a 1600 gallon container, staged outside the facility, with simulated Cast Stone grout. The container, staged outside the building approximately 60 ft from the SCPF, was instrumented with x-, y-, and z-axis thermocouples to monitor curing temperature. The container was also fitted with two formed core sampling vials. For the operation, the targeted grout production rate was 1.5 gpm. This required a salt solution flow rate of approximately 1 gpm and a premix feed rate of approximately 580 lb/h. During the final day of operation, the dry feed rate was increased to evaluate the ability of the system to handle increased throughput. Although non-steady state operational periods created free surface liquids, no bleed water was observed either before or after operations. The final surface slope at a fill height of 39.5 inches was 1-1.5 inches across the 8.5 foot diameter container, highest at the final fill point and lowest diametrically opposed to the fill point. During processing, grout was collected in cylindrical containers from both the mixer discharge and the discharge into the container. These samples were stored in a humid environment either in a closed box proximal to the container or inside the laboratory. Additional samples collected at these sampling points

Engineering scale demonstration of a prospective Cast Stone process

Energy Technology Data Exchange (ETDEWEB)

Cozzi, A.; Fowley, M.; Hansen, E.; Fox, K.; Miller, D.; Williams, M.

2014-09-30

This report documents an engineering-scale demonstration with non-radioactive simulants that was performed at SRNL using the Scaled Continuous Processing Facility (SCPF) to fill an 8.5 ft container with simulated Cast Stone grout. The Cast Stone formulation was chosen from the previous screening tests. Legacy salt solution from previous Hanford salt waste testing was adjusted to correspond to the average composition generated from the Hanford Tank Waste Operation Simulator (HTWOS). The dry blend materials, ordinary portland cement (OPC), Class F fly ash, and ground granulated blast furnace slag (GGBFS or BFS), were obtained from Lafarge North America in Pasco, WA. Over three days, the SCPF was used to fill a 1600 gallon container, staged outside the facility, with simulated Cast Stone grout. The container, staged outside the building approximately 60 ft from the SCPF, was instrumented with x-, y-, and z-axis thermocouples to monitor curing temperature. The container was also fitted with two formed core sampling vials. For the operation, the targeted grout production rate was 1.5 gpm. This required a salt solution flow rate of approximately 1 gpm and a premix feed rate of approximately 580 lb/h. During the final day of operation, the dry feed rate was increased to evaluate the ability of the system to handle increased throughput. Although non-steady state operational periods created free surface liquids, no bleed water was observed either before or after operations. The final surface slope at a fill height of 39.5 inches was 1-1.5 inches across the 8.5 foot diameter container, highest at the final fill point and lowest diametrically opposed to the fill point. During processing, grout was collected in cylindrical containers from both the mixer discharge and the discharge into the container. These samples were stored in a humid environment either in a closed box proximal to the container or inside the laboratory. Additional samples collected at these sampling points

The Civil Palaces in Gravina street, Alicante: building stones and salt weathering

OpenAIRE

Louis, M.; García del Cura, M. A.; Spairani, Y.; de Blas, D.

2001-01-01

This paper presents a study into the architecture and construction of the 18th Century Civil Palaces located in Gravina street (Provincial Museum of Fine Arts of Alicante), the building stones used and the mineral related decay processes that these materials have suffered. The original building stones and other stones used in subsequent restorations in these Civil Palaces are bioclastic limestones and/or calcarenites (San Julian Stone and Bateig Stone). Campello stone and other limestones ...

Acidic Ionic Liquids.

Science.gov (United States)

Amarasekara, Ananda S

2016-05-25

Ionic liquid with acidic properties is an important branch in the wide ionic liquid field and the aim of this article is to cover all aspects of these acidic ionic liquids, especially focusing on the developments in the last four years. The structural diversity and synthesis of acidic ionic liquids are discussed in the introduction sections of this review. In addition, an unambiguous classification system for various types of acidic ionic liquids is presented in the introduction. The physical properties including acidity, thermo-physical properties, ionic conductivity, spectroscopy, and computational studies on acidic ionic liquids are covered in the next sections. The final section provides a comprehensive review on applications of acidic ionic liquids in a wide array of fields including catalysis, CO2 fixation, ionogel, electrolyte, fuel-cell, membrane, biomass processing, biodiesel synthesis, desulfurization of gasoline/diesel, metal processing, and metal electrodeposition.

Ornamental Stones and Gemstones: The limits of heritage stone designation: The case for and against Australian Precious Opal

Science.gov (United States)

Cooper, Barry

2015-04-01

When the international designation of natural stone types was first mooted in 2007, stones that were utilised in building and construction were the primary focus of attention. However following public discussion it soon became apparent that sculptural stones, stone used for utilitarian purposes such as millstones, as well as archaeological materials including stones used by early man could all be positively assessed as a potential Global Heritage Stone Resource (GHSR). Over the past 2 years it has been realised there is also a range of ornamental and semi-precious stones that may also be considered in the same international context. Examples in this respect include Imperial Porphyry sourced from Egypt that was much prized in the ancient world and "Derbyshire Blue John" a variety of fluorspar from central England that was used for vases, chalices, urns, candle sticks, jars, bowls door, jewellery and fire-place surrounds, especially in the 18th and 19th centuries. It is at this point that rock materials, sometimes used as gemstones, impinge on the domain of typical heritage stones. In Australia, the gemstone most identifiable with the country is precious opal formed by sedimentary processes in the Great Artesian Basin. In this paper the question is asked whether "Australian Precious Opal" could be or should be considered as a heritage stone of international significance. Immediately Australian Precious Opal satisfies several GHSR criteria including historic use for more than 50 years and wide-ranging utilisation for prestige jewellery around the world. It is also recognised as a cultural icon including association with national identity in Australia as it is legally defined as Australia's "National Gemstone" as well as being the "Gemstone Emblem" for the State of South Australia. Opal continues to be mined. Designation of Australian Precious Opal as a Global Heritage Stone Resource would likely involve formal international recognition of Australian opal in the

Stone composition and metabolic status.

Science.gov (United States)

Bibilash, B S; Vijay, Adarsh; Fazil Marickar, Y M

2010-06-01

This paper aims to study the correlation between biochemical risk factors of the stone former and the type of oxalate stone formed, namely calcium oxalate monohydrate (COM) and calcium oxalate dehydrate (COD). A retrospective study of 487 patients who had been attending the urinary stone clinic, Trivandrum during 1998-2007 was conducted. The stones retrieved from them were subjected to chemical analysis and FTIR spectrographic analysis. They were categorized into COM, COD, mixed COM+COD and others. Of 142 pure calcium oxalate stone patients, 87 were predominantly COM stone formers and 55 COD stone formers. Their metabolic status of 24 h urine and serum was assessed. The values of urine calcium, phosphorus, uric acid, magnesium, creatinine, oxalate, citric acid, sodium and potassium, serum values of calcium, phosphorus, uric acid, magnesium and creatinine and calculated values of creatinine clearance, tubular reabsorption of phosphate, calcium magnesium ratio and calcium oxalate ratio were recorded. Comparison was made between the COM stone group and the COD stone group. Patients forming COM stones had significantly higher mean values for urine calcium (P stone forming patients. All other values failed to show significant difference. Patients, with higher urine oxalate, formed COM stones. Those with low magnesium (which is an inhibitor) formed more of COD stones. Urine calcium was high in both groups without showing significant variation from the mean. In patients with high calcium-oxalate and calcium-magnesium ratios, there is higher chance of forming a COD stone than COM. Identification of the crystallization pattern of the calcium stone will help in selecting treatment modalities.

Estimation of urinary stone composition by automated processing of CT images.

Science.gov (United States)

Chevreau, Grégoire; Troccaz, Jocelyne; Conort, Pierre; Renard-Penna, Raphaëlle; Mallet, Alain; Daudon, Michel; Mozer, Pierre

2009-10-01

The objective of this article was developing an automated tool for routine clinical practice to estimate urinary stone composition from CT images based on the density of all constituent voxels. A total of 118 stones for which the composition had been determined by infrared spectroscopy were placed in a helical CT scanner. A standard acquisition, low-dose and high-dose acquisitions were performed. All voxels constituting each stone were automatically selected. A dissimilarity index evaluating variations of density around each voxel was created in order to minimize partial volume effects: stone composition was established on the basis of voxel density of homogeneous zones. Stone composition was determined in 52% of cases. Sensitivities for each compound were: uric acid: 65%, struvite: 19%, cystine: 78%, carbapatite: 33.5%, calcium oxalate dihydrate: 57%, calcium oxalate monohydrate: 66.5%, brushite: 75%. Low-dose acquisition did not lower the performances (P < 0.05). This entirely automated approach eliminates manual intervention on the images by the radiologist while providing identical performances including for low-dose protocols.

76 FR 52657 - Herschel L. Webster; Revonda Amthor; Notice of Termination of Exemption by Implied Surrender and...

Science.gov (United States)

2011-08-23

.... Webster; Revonda Amthor; Notice of Termination of Exemption by Implied Surrender and Soliciting Comments... initiated by the Commission: a. Type of Proceeding: Termination of exemption by implied surrender. b... exemption if any term or condition of the exemption is violated. The project has not operated since 1996 and...

Membrane/distillation hybrid process research and development. Final report, phase II

Energy Technology Data Exchange (ETDEWEB)

Mazanec, T.J.

1997-07-01

This report covers work conducted under the grant awarded to BP by DOE in late 1991 entitled {open_quotes}Membrane/Distillation Hybrid Process Research and Development.{close_quotes} The program was directed towards development and commercialization of the BP process for separation of vapor phase olefins from non-olefins via facilitated transport using an aqueous facilitator. The program has come to a very successful conclusion, with formation of a partnership between BP and Stone and Webster Engineering Corporation (SWEC) to market and commercialize the technology. The focus of this report is the final portion of the program, during which engineering re-design, facilitator optimization, economic analysis, and marketing have been the primary activities. At the end of Phase II BP was looking to partner with an engineering firm to advance the selective olefin recovery (SOR) technology from the lab/demo stage to full commercialization. In August 1995 BP and SWEC reached an agreement to advance the technology by completing additional Phase III work with DOE and beginning marketing activities.

The Civil Palaces in Gravina street, Alicante: building stones and salt weathering

OpenAIRE

Louis, M.; García del Cura, M. A.; Spairani, Y.; de Blas, D.

2001-01-01

This paper presents a study into the architecture and construction of the 18^th Century Civil Palaces located in Gravina street (Provincial Museum of Fine Arts of Alicante), the building stones used and the mineral related decay processes that these materials have suffered. The original building stones and other stones used in subsequent restorations in these Civil Palaces are bioclastic limestones and/or calcarenites (San Julian Stone and Bateig Stone). Campello st...

Ionic interchanges and adsorbents of interest in nuclear and environmental processes

International Nuclear Information System (INIS)

Olguin G, M. T.

2010-01-01

The ionic interchanges and the adsorbents are of special interest inside the water treatment processes (industrial or human consumption), as well as for the radionuclides generation, due to their structural characteristics and to their capacity to remove an extensive range of polluting species. In the ININ have been developed researches on these materials, with the purpose of generating new knowledge that serves like base inside radionuclides separation processes or polluted water treatment. The results obtained until the present have been published in different scientific magazines. (Author)

Canada's National Building Stone: Tyndall Stone from Manitoba

Science.gov (United States)

Pratt, Brian R.; Young, Graham A.; Dobrzanski, Edward P.

2016-04-01

Tyndall Stone is a distinctively mottled and highly fossiliferous dolomitic limestone that belongs to the Selkirk Member of the Red River Formation, of Late Ordovician (Katian) age. It has been quarried at Garson, Manitoba, 37 km northeast of Winnipeg, since 1895, although other quarries in the area go back to 1832. Tyndall Stone, so named because it was shipped by rail from nearby Tyndall, is currently produced by Gillis Quarries Limited. It has various uses as a dimension stone. Large slabs, most often cut parallel to bedding, face the exterior or interior of many important buildings such as the Parliament Buildings and the Canadian Museum of Civilization in the Ottawa area, the Empress Hotel in Victoria, and the provincial legislatures in Winnipeg and Regina, as well as many commercial buildings especially in the Canadian prairies. At the quarries, the stone is cut vertically, using eight foot (2.44 m) diameter saws mounted on one hundred foot (30.5 m) tracks, then split into 6-8 tonne blocks that are moved using front-end loaders. Gillis Quarries operates a large finishing plant with an area of about 4000 m2. Stone is processed along advanced cutting lines that feature eight primary saws and six gantry saw stations, allowing it to be made into a variety of sizes, shapes, and finishes. The Selkirk Member is 43 m thick and the stone is extracted from a 6-8 m thick interval within the lower part. The upper beds tend to be more buff-coloured than the grey lower beds due to weathering by groundwater. The stone is massive, but extracted blocks are less than ~1m thick due to splitting along stylolites. Consisting of bioturbated wackestone to packstone, the Tyndall Stone was deposited in a shallow-marine environment within the photic zone, in the central part of the vast equatorial epicontinental sea that covered much of Laurentia. Scattered thin, bioclastic grainstone lenses record brief, low-energy storm events. The distinctive mottles are formed by dolomitized

Natural Stone in Spain: trends and perspectives

International Nuclear Information System (INIS)

Marchán Sanz, C.; Regueiro y González-Barros, M.; Delgado Arenas, P.

2017-01-01

The natural stone sector was severely affected by the national construction sector crisis. Production, both exworks and processed, has been also harshly affected dropping from 8Mt/y in 2007 to 3,49Mt/y in 2015, particularly in the marble and granite sectors, since slate has always been a mainly exporting sub-sector. In the latest times, thanks mainly to exports, production apparently has slowly started to recover. In this paper, we review the typology of the Spanish natural stone products and the production data of the main stone subsectors (marble, granite and slate) in the last 10 years and we review possible future trends in the framework of the first steps of the economic recovery. [es

Anholt Rosetta Stones

DEFF Research Database (Denmark)

Trempe Jr., Robert B.; Buthke, Jan

2017-01-01

This book records and celebrates the research finding of Anholt Island by students from Studio 2B, Arkitektskolen Aarhus, These mahogany constructions are our architectural versions of a Rosetta Stone. These are constructs that record layers of information about Anholt island through virtual...... and physical techniques, where each step and mechanic imparts and inscribes knowledge beyond the 1:1. These constructs are visual keys, used to inspire and influence all decision-making processes in a design project. These architectural Rosetta Stones document and amplify quantitative information about a site...

Metabolic Characteristics and Risks Associated with Stone Recurrence in Korean Young Adult Stone Patients.

Science.gov (United States)

Kang, Ho Won; Seo, Sung Pil; Kim, Won Tae; Kim, Yong-June; Yun, Seok-Joong; Kim, Wun-Jae; Lee, Sang-Cheol

2017-08-01

The aim of this study was to assess the metabolic characteristics and risks of stone recurrence in young adult stone patients in Korea. The medical records of 1532 patients presenting with renal or ureteric stones at our stone clinic between 1994 and 2015 were retrospectively reviewed. Patients were grouped according to age (young adult, 18-29 years; intermediate onset, 30-59 years; old age, ≥60 years) at first presentation, and measurements of clinicometabolic characteristics and risks of stone recurrence were compared. Overall, excretion of urinary stone-forming substances was highest in the intermediate onset group, followed by the young adult and old age groups. Importantly, excretion of urinary citrate was lowest in the young adult group. Kaplan-Meier analyses identified a significant difference between the three age groups in terms of stone recurrence (log rank test, p adult stone patients. Younger age (18-29 years) at first stone presentation was a significant risk factor for stone recurrence, and urinary citrate excretion was an independent risk factor affecting recurrence in this group. Metabolic evaluation and potassium citrate therapy should be considered for young adult stone patients to prevent recurrence.

Percutaneous suprapubic stone extraction for posterior urethral stones in children: efficacy and safety.

Science.gov (United States)

Safwat, Ahmed S; Hameed, Diaa A; Elgammal, Mohamed A; Abdelsalam, Yasser M; Abolyosr, Ahmad

2013-08-01

To evaluate the safety and efficacy of percutaneous suprapubic stone extraction (PSPSE) for pediatric posterior urethral stones. Between July 2007 and June 2010, 54 boys presenting with acute urinary retention due to posterior urethral stones underwent PSPSE. Patients were a mean age of 66.4 months (range, 8-180 months). The stone size was 0.7-1.9 cm. Patients were placed under general anesthesia, and a 7F urethroscope was used to pushback the stone to the bladder. A 3-mm suprapubic puncture with a scalpel was performed, followed by insertion of a straight narrow hemostat through the puncture aided with cystoscopic guidance. The stone was grasped with the hemostat in its narrowest diameter and was extracted percutaneously or crushed if friable. The suprapubic puncture was closed with a single 4-0 Vicryl (Ethicon) suture. Intact stone retrieval was achieved in 45 patients, and the stone was crushed into minute fragments in 9 patients. Intraperitoneal extravasation developed in 1 patient that required open surgical intervention. Mean operative time was 22 minutes. Patients were monitored for up to 17 months, with complete resolution of symptoms and stone clearance. PSPSE provides a minimally invasive approach for the extraction of urethral and bladder stones in the pediatric population. The use of a straight hemostat for suprapubic stone extraction or crushing is a good alternative to suprapubic tract dilation, with minimal morbidity. Copyright © 2013 Elsevier Inc. All rights reserved.

Histopathology Predicts the Mechanism of Stone Formation

Science.gov (United States)

Evan, Andrew P.

2007-04-01

About 5% of American women and 12% of men will develop a kidney stone at some time in their life and these numbers appear to be on the rise. Despite years of scientific research into the mechanisms of stone formation and growth, limited advances have been made until recently. Randall's original observations and thoughts on the mechanisms for kidney stone formation have been validated for idiopathic calcium oxalate stone formers (ICSF) but not for most other stone forming groups. Our current studies on selected groups of human stone formers using intraoperative papillary biopsies has shown overwhelming evidence for the presence of Randall's plaque in ICSF and that stone formation and growth are exclusively linked to its availability to urinary ions and proteins. Intense investigation of the plaque-stone junction is needed if we are to understand the factors leading to the overgrowth process on exposed regions of plaque. Such information should allow the development of treatment strategies to block stone formation in ICSF patients. Patients who form brushite stones, or who form apatite stones because of distal renal tubular acidosis (dRTA), or patients with calcium oxalate stones due to obesity bypass procedures, or patients with cystinuria, get plugged inner medullary collecting ducts (IMCD) which leads to total destruction of the lining cells and focal sites of interstitial fibrosis. These stone formers have plaque but at levels equal to or below non-stone formers, which would suggest that they form stones by a different mechanism than do ICSF patients.

Ionic Liquid (1-Butyl-3-Metylimidazolium Methane Sulphonate Corrosion and Energy Analysis for High Pressure CO2 Absorption Process

Directory of Open Access Journals (Sweden)

Aqeel Ahmad Taimoor

2018-05-01

Full Text Available This study explores the possible use of ionic liquids as a solvent in a commercial high-pressure CO2 removal process, to gain environmental and energy benefits. There are two main constraints in realizing this: ionic liquids can be corrosive, specifically when mixed with a water/amine solution with dissolved O2 & CO2; and CO2 absorption within this process is not very well understood. Therefore, scavenging CO2 to ppm levels from process gas comes with several risks. We used 1-butyl-3-methylimidazoium methane sulphonate [bmim][MS] as an ionic liquid because of its high corrosiveness (due to its acidic nature to estimate the ranges of expected corrosion in the process. TAFEL technique was used to determine these rates. Further, the process was simulated based on the conventional absorption–desorption process using ASPEN HYSYS v 8.6. After preliminary model validation with the amine solution, [bmim][MS] was modeled based on the properties found in the literature. The energy comparison was then provided and the optimum ratio of the ionic liquid/amine solution was calculated.

IGCP 637 Heritage Stone Designation: A UNESCO and IUGS project on natural stones

Science.gov (United States)

Pereira, Dolores; Cooper, Barry; Schouenborg, Björn; Marker, Brian; Kramar, Sabina

2017-04-01

IGCP 637 was approved in 2015 to facilitate establishment of a new international geological standard for building and ornamental stones. Formal international recognition of those natural stone types that have achieved widespread utilization in human culture is now underway and the term "Global Heritage Stone Resource" (GHSR) has been proposed for this designation. Stones that have been used in heritage construction, sculptural masterpieces, as well as in utilitarian (yet culturally important) applications are obvious GHSR candidates. In co-ordination with these aims the project has an associated role to promote the adoption and use of the GHSR designation. Consequently an interim list of potential GHSRs is maintained and a register of GHSR approved stones is being created. IGCP 637 also enhances the capacity of the International Union of Geological Sciences (IUGS) in the realm of dimension stone and geological standards as it is the first IUGS involvement in this subject. As a consequence, the largest known international grouping of dimension stone professionals has been established. Within IGCP 637 a web page has been created at www.globalheritagestone.com, including information on the Working Group and also specific information on the evolution of the project. Several researchers were funded to attend the Heritage Stone working group activities, including researchers from Algeria, Malawi, India, Italy and Russia. We also have produced many publications, both as individual papers and special issues in journals included in the Journal Citation Reports. Monographs are being prepared at present. Hopefully, IGCP 637 will help to widen the circle of researchers interested in natural stones as part of our geoheritage. Heritage Stone references: articles and special issues - Pereira, D. and Marker, B. (2016) The value of original natural stone in the context of architectural heritage. Geosciences, 6, 13. - Heritage Stone 1. Ed. Pereira and Pratt. (2016). Geoscience

Shock Wave Lithotripsy in Ureteral Stones: Evaluation of Patient and Stone Related Predictive Factors

Directory of Open Access Journals (Sweden)

Ozgur Yazici

2015-08-01

Full Text Available ABSTRACTPurpose:To evaluate the patient and stone related factors which may influence the final outcome of SWL in the management of ureteral stones.Materials and Methods:Between October 2011 and October 2013, a total of 204 adult patients undergoing SWL for single ureteral stone sizing 5 to 15 mm were included into the study program. The impact of both patient (age, sex, BMI, and stone related factors (laterality, location, longest diameter and density as CT HU along with BUN and lastly SSD (skin to stone distance on fragmentation were analysed by univariate and multivariate analyses. Results: Stone free rates for proximal and distal ureteral stones were 68.8% and 72.7%, respectively with no statistically significant difference between two groups (p=0.7. According to univariate and multivariate analyses, while higher BMI (mean: 26.8 and 28.1, p=0.048 and stone density values (mean: 702 HU and 930 HU, p<0.0001 were detected as statistically significant independent predictors of treatment failure for proximal ureteral stones, the only statistically significant predicting parameter for the success rates of SWL in distal ureteral stones was the higher SSD value (median: 114 and 90, p=0.012.Conclusions:Our findings have clearly shown that while higher BMI and increased stone attenuation values detected by NCCT were significant factors influencing the final outcome of SWL treatment in proximal ureteral stones; opposite to the literature, high SSD was the only independent predictor of success for the SWL treatment of distal ureteral stones.

Effect of ionic strength on the kinetics of ionic and micellar reactions in aqueous solution

International Nuclear Information System (INIS)

Dung, M.H.; Kozak, J.J.

1982-01-01

The effect of electrostatic forces on the rate of reaction between ions in aqueous solutions of intermediate ionic strength is studied in this paper. We consider the kinetics of reactions involving simple ionic species (1--1 and 2--2 electrolyte systems) as well as kinetic processes mediated by the presence of micellar ions (or other charged organizates). In the regime of ionic strength considered, dielectric saturation of the solvent in the vicinity of the reacting ions must be taken into account and this is done by introducing several models to describe the recovery of the solvent from saturation to its continuum dielectric behavior. To explore the effects of ion size, charge number, and ionic strength on the overall rate constant for the process considered, we couple the traditional theory of ionic reactions in aqueous solution with calculations of the electrostatic potential obtained via solution of the nonlinear Poisson--Boltzmann equation. The great flexibility of the nonlinear Poisson--Boltzmann theory allows us to explore quantitatively the influence of each of these effects, and our simulations show that the short-range properties of the electrostatic potential affect primarily kinetically controlled processes (to varying degrees, depending on the ionic system considered) whereas the down-range properties of the potential play a (somewhat) greater role in influencing diffusion-controlled processes. A detailed examination is made of ionic strength effects over a broad range of ionic concentrations. In the regime of low ionic strength, the limiting slope and intercept of the curve describing the dependence of log k/sub D/ on I/sup 1/2//(1+I/sup 1/2/) may differ considerably from the usual Debye--Hueckel limiting relations, depending on the particular model chosen to describe local saturation effects

Fracture mechanics model of stone comminution in ESWL and implications for tissue damage

Science.gov (United States)

Lokhandwalla, Murtuza; Sturtevant, Bradford

2000-07-01

Focused shock waves administered during extracorporeal shock-wave lithotripsy (ESWL) cause stone fragmentation. The process of stone fragmentation is described in terms of a dynamic fracture process. As is characteristic of all brittle materials, fragmentation requires nucleation, growth and coalescence of flaws, caused by a tensile or shear stress. The mechanisms, operative in the stone, inducing these stresses have been identified as spall and compression-induced tensile microcracks, nucleating at pre-existing flaws. These mechanisms are driven by the lithotripter-generated shock wave and possibly also by cavitation effects in the surrounding fluid. In this paper, the spall mechanism has been analysed, using a cohesive-zone model for the material. The influence of shock wave parameters, and physical properties of stone, on stone comminution is described. The analysis suggests a potential means to exploit the difference between the stone and tissue physical properties, so as to make stone comminution more effective, without increasing tissue damage.

Infection (urease) stones.

Science.gov (United States)

Griffith, D P; Osborne, C A

1987-01-01

Infection-induced stones in man probably form solely as a consequence of urealysis which is catalyzed by the bacterial protein urease. Urease stones composed of struvite and carbonate-apatite may form primarily, or as secondary stones or pre-existent metabolic stones. Struvite stones form and grow rapidly owing to (a) supersaturation of urine with stone forming salts, (b) 'salting out' of poorly soluble organic substances normally dissolved in urine and (c) ammonia-induced destruction of the normally protective urothelial glycosaminoglycan layer. Immature (predominantly organic) matrix stones mature into densely mineralized stones. Curative treatment is possible only by eliminating all of the stone and by eradicating all urinary and parenchymal infection. A variety of operative and pharmaceutical approaches are available. Patient treatment must be individualized inasmuch as some patients are better candidates for one type of treatment than another.

Assessment of stone composition in the management of urinary stones

NARCIS (Netherlands)

Kijvikai, Kittinut; de la Rosette, J. J. M.

2011-01-01

Several explanations have been suggested to account for the failure of extracorporeal shockwave lithotripsy (ESWL) treatment in patients with urinary stones, including large stone volume, unfavorable stone location or composition and the type of lithotriptor used. Unfavorable stone composition is

The road to moderation: the significance of Webster for legislation restricting abortion.

Science.gov (United States)

Wardle, L D

1989-01-01

They only certain outcomes of the Webster decision is that state legislatures will be stimulated to enact more legislation regulating abortion. However it is unlikely that the worst prochoice fears will be realized. A return to the 19th century abortion prohibition era is very unlikely because of trends in Western societal attitudes and laws. Since 1973 and the Roe decision there have been more than 300 bills or acts enacted by state legislatures that regulate abortion. Whether it is criminal prohibitions, licensing requirements, zoning restrictions, parental participation, spousal participation, informed consent, health and sanitation regulations, post viability regulations, laws protecting the right of health care workers not to participate in abortion, public funding restrictions, or regulations of fetal experimentation, abortion regulations have definitely been wide spread. The democratic process is going to produce a moderate position on abortion as a result of the Webster decision for 7 reasons: (1) the period before Roe was a time when abortion legislation was in a trend towards moderation. In 1962 abortion prohibitions were in place in all states. In 1967 4 states adopted an abortion reform position that allowed for abortion in the hard cases: (1) maternal health, (2) fetal defect, (3) rape/incest. Over the next 5 years 9 more states followed and 3 others went even farther by allowing unrestricted abortion during early pregnancy. (2) public opinion is consistent and strong in favoring abortion restrictions except for the hard cases. (3) the trend towards moderation in abortion regulations is closely related to other legal trends toward moderation. No fault divorce was a move towards moderation. The abortion experience in Western Europe was towards moderation. (5) Medical technological developments are putting the power of abortion in the hands of women. Abortificant drugs that can be used without medical assistance give women greater freedom. (6) The

Factors affecting stone-free rate and complications of percutaneous nephrolithotomy for treatment of staghorn stone.

Science.gov (United States)

el-Nahas, Ahmed R; Eraky, Ibrahim; Shokeir, Ahmed A; Shoma, Ahmed M; el-Assmy, Ahmed M; el-Tabey, Nasr A; Soliman, Shady; Elshal, Ahmed M; el-Kappany, Hamdy A; el-Kenawy, Mahmoud R

2012-06-01

To determine factors affecting the stone-free rate and complications of percutaneous nephrolithotomy (PNL) for treatment of staghorn stones. The computerized database of patients who underwent PNL for treatment of staghorn stones between January 2003 and January 2011 was reviewed. All perioperative complications were recorded and classified according to modified Clavien classification system. The stone-free rate was evaluated with low-dose noncontrast computed tomography (CT). Univariate and multivariate statistical analyses were performed to determine factors affecting stone-free and complication rates. The study included 241 patients (125 male and 116 female) with a mean age of 48.7 ±14.3 years. All patients underwent 251 PNL (10 patients had bilateral stones). The stone-free rate of PNL monotherapy was 56% (142 procedures). At 3 months, the stone-free rate increased to 73% (183 kidneys) after shock wave lithotripsy. Independent risk factors for residual stones were complete staghorn stone and presence of secondary calyceal stones (relative risks were 2.2 and 3.1, respectively). The complication rate was 27% (68 PNL). Independent risk factors for development of complications were performance of the procedure by urologists other than experienced endourologist and positive preoperative urine culture (relative risks were 2.2 and 2.1, respectively). Factors affecting the incidence of residual stones after PNL are complete staghorn stones and the presence of secondary calyceal stones. Complications are significantly high if PNL is not performed by an experienced endourologist or if preoperative urine culture is positive. Copyright © 2012 Elsevier Inc. All rights reserved.

Instrumental neutron activation analysis of kidney stones

International Nuclear Information System (INIS)

Sarmani, S.; Kuan, L.L.; Bakar, M.A.A.

1990-01-01

Kidney stone samples of the types calcium oxalate, uric acid, and xanthine were analyzed for their elemental contents by neutron activation analysis to study both the elemental correlation and influence of element on stone precipitation processes. Elements, such as Al, Au, Br, Ca, Cl, Co, Cr, Fe,H, I, K, Mg, Na, Sb, Se, Sr, and Zn, were determined quantitatively. Calcium oxalate stones contained higher concentration of all the elements analyzed compared to uric acid or xanthine stones. The concentrations of Cl, Fe, K, Na, Sr, and Zn were relatively higher than Au, Co, Cr, and Sb. A positive correlation exists between Ca and Zn, whereas a negative correlation exists between Sr and Ca. Zinc may play an important role in the formation of calcium oxalate stone

Production and characterization of composite stone; Processamento e caracterizacao de pedra composta

Energy Technology Data Exchange (ETDEWEB)

Leirose, G.D. [Universidade Federal de Ouro Preto (UFOP), MG (Brazil); Lameiras, F.S., E-mail: danileirose@yahoo.com.br [Centro de Desenvolvimento da Tecnologia Nuclear (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

2012-07-01

Composite stone is a product similar to natural granite or marble, produced with particles of these materials. This material is used like natural stone as lining. The fabrication of artificial stones using residues of banded iron formations is a promising alternative to its actual destination (storage in dam). This research aims the characterization of composite stone to prove the efficacy of this kind of processing. It was used first, natural quartz as a raw material. The patterns of the samples were confirmed by IR spectra and XRD patterns, ensuring the reproducibility of processing applied. Moreover, this material is homogeneous, with low porosity and high flexural strength, confirmed by its structural characterization. Thus, it can be affirmed that the process chosen is suitable, enabling the application of this methodology to the use of waste. (author)

75 FR 67775 - Compass Group USA, Inc., Canteen, Webster City, Iowa; Notice of Negative Determination on...

Science.gov (United States)

2010-11-03

... DEPARTMENT OF LABOR Employment and Training Administration [TA-W-73,503] Compass Group USA, Inc., Canteen, Webster City, Iowa; Notice of Negative Determination on Reconsideration On September 21, 2010... passage of the Trade Globalization Adjustment Assistance Act of 2009'' and that in making those changes...

Continuous process for selective metal extraction with an ionic liquid

NARCIS (Netherlands)

Parmentier, D.; Paradis, S.; Metz, S.J.; Wiedmer, S.K.; Kroon, M.C.

2016-01-01

This work describes for the first time a continuous process for selective metal extraction with an ionic liquid (IL) at room temperature. The hydrophobic fatty acid based IL tetraoctylphosphonium oleate ([P8888][oleate]) was specifically chosen for its low viscosity and high selectivity towards

Nuclear plant operations, maintenance, and configuration management using three-dimensional computer graphics and databases

International Nuclear Information System (INIS)

Tutos, N.C.; Reinschmidt, K.F.

1987-01-01

Stone and Webster Engineering Corporation has developed the Plant Digital Model concept as a new approach to Configuration Mnagement of nuclear power plants. The Plant Digital Model development is a step-by-step process, based on existing manual procedures and computer applications, and is fully controllable by the plant managers and engineers. The Plant Digital Model is based on IBM computer graphics and relational database management systems, and therefore can be easily integrated with existing plant databases and corporate management-information systems

EVALUATION OF CONSISTENCY AND SETTING TIME OF IRANIAN DENTAL STONES

Directory of Open Access Journals (Sweden)

F GOL BIDI

2000-09-01

Full Text Available Introduction. Dental stones are widely used in dentistry and the success or failure of many dental treatments depend on the accuracy of these gypsums. The purpose of this study was the evaluation of Iranian dental stones and comparison between Iranian and foreign ones. In this investigation, consistency and setting time were compared between Pars Dendn, Almas and Hinrizit stones. The latter is accepted by ADA (American Dental Association. Consistency and setting time are 2 of 5 properties that are necessitated by both ADA specification No. 25 and Iranian Standard Organization specification No. 2569 for evaluation of dental stones. Methods. In this study, the number and preparation of specimens and test conditions were done according to the ADA specification No. 25 and all the measurements were done with vicat apparatus. Results. The results of this study showed that the standard consistency of Almas stone was obtained by 42ml water and 100gr powder and the setting time of this stone was 11±0.03 min. Which was with in the limits of ADA specification (12±4 min. The standard consistency of Pars Dandan stone was obrianed by 31ml water and 100 gr powder, but the setting time of this stone was 5± 0.16 min which was nt within the limits of ADA specification. Discussion: Comparison of Iranian and Hinrizit stones properties showed that two probable problems of Iranian stones are:1- Unhemogrnousity of Iranian stoned powder was caused by uncontrolled temperature, pressure and humidity in the production process of stone. 2- Impurities such as sodium chloride was responsible fo shortening of Pars Dendens setting time.

A case report of ureteral cast stone and giant urethral stone, respectively

Energy Technology Data Exchange (ETDEWEB)

Song, Ho Yung; Rhee, Song Joo; Choi, Ki Chul [School of Medicine, Jeongbug National University, Jeonju (Korea, Republic of)

1980-12-15

Urinary lithiasis is one of the most common disease of the urinary tract. It occurs more frequently in men than in women but rare in children and in blacks; a familial predisposition is often encountered. Ureteral stones originate in the kidney. Gravity and peristalis contribute to spontaneous passage into and down the ureter. Ureterovesical junction is the most frequent lodging site of stone. In our hospital one case of ureteral cast stone and giant urethral stone were found respectively and they were confirmed by radiological examination and surgery on Aug. 1978 and Jan. 1979. Ureteral cast stone which had been introduced and named first by Kiyonobu Tari and Kikjiro So in 1972 was very giant unusually. It may be the only one till now. Our patient was 36 years old female who has been suffered from intermittent right flank pain for 10 years. On KUB giant cylindrical radiopaque shadow was shown on RLQ extended to right minor pelvis and this was confirmed as a stone by retrograde ureteral catheterization. A stone measured 13cm x 1.5cm was found above the ureterovesical junction during operation. Follow up excretory urogram one year after operation showed no functional improvement of right kidney. Urethral stone is also unusual urinary lithiasis. This 60 years old male patient was been suffered from non-tender palpable hard mass on scrotal area and intermittent urinary retention. When urinary retention was occurred it was relieved by manipulation of the mass by himself. On plain film oval shaped giant radiopaque shadow was shown on cavernous urethral region. On urethrocystogram anterior urethra was opacified, but posterior urethra and bladder were not opacified and multiple fistulous leakage was identified. A stone measured 6.5cm x 3.5cm was found in cavernous urethra during operation.

A case report of ureteral cast stone and giant urethral stone, respectively

International Nuclear Information System (INIS)

Song, Ho Yung; Rhee, Song Joo; Choi, Ki Chul

1980-01-01

Urinary lithiasis is one of the most common disease of the urinary tract. It occurs more frequently in men than in women but rare in children and in blacks; a familial predisposition is often encountered. Ureteral stones originate in the kidney. Gravity and peristalis contribute to spontaneous passage into and down the ureter. Ureterovesical junction is the most frequent lodging site of stone. In our hospital one case of ureteral cast stone and giant urethral stone were found respectively and they were confirmed by radiological examination and surgery on Aug. 1978 and Jan. 1979. Ureteral cast stone which had been introduced and named first by Kiyonobu Tari and Kikjiro So in 1972 was very giant unusually. It may be the only one till now. Our patient was 36 years old female who has been suffered from intermittent right flank pain for 10 years. On KUB giant cylindrical radiopaque shadow was shown on RLQ extended to right minor pelvis and this was confirmed as a stone by retrograde ureteral catheterization. A stone measured 13cm x 1.5cm was found above the ureterovesical junction during operation. Follow up excretory urogram one year after operation showed no functional improvement of right kidney. Urethral stone is also unusual urinary lithiasis. This 60 years old male patient was been suffered from non-tender palpable hard mass on scrotal area and intermittent urinary retention. When urinary retention was occurred it was relieved by manipulation of the mass by himself. On plain film oval shaped giant radiopaque shadow was shown on cavernous urethral region. On urethrocystogram anterior urethra was opacified, but posterior urethra and bladder were not opacified and multiple fistulous leakage was identified. A stone measured 6.5cm x 3.5cm was found in cavernous urethra during operation

Radiation Chemistry and Photochemistry of Ionic Liquids

International Nuclear Information System (INIS)

Wishart, J.F.; Takahaski, K.

2010-01-01

As our understanding of ionic liquids and their tunable properties has grown, it is possible to see many opportunities for ionic liquids to contribute to the sustainable use of energy. The potential safety and environmental benefits of ionic liquids, as compared to conventional solvents, have attracted interest in their use as processing media for the nuclear fuel cycle. Therefore, an understanding of the interactions of ionizing radiation and photons with ionic liquids is strongly needed. However, the radiation chemistry of ionic liquids is still a relatively unexplored topic although there has been a significant increase in the number of researchers in the field recently. This article provides a brief introduction to ionic liquids and their interesting properties, and recent advances in the radiation chemistry and photochemistry of ionic liquids. In this article, we will mainly focus on excess electron dynamics and radical reaction dynamics. Because solvation dynamics processes in ionic liquids are much slower than in molecular solvents, one of the distinguishing characteristics is that pre-solvated electrons play an important role in ionic liquid radiolysis. It will be also shown that the reaction dynamics of radical ions is significantly different from that observed in molecular solvents because of the Coulombic screening effects and electrostatic interactions in ionic liquids.

Getter Incorporation into Cast Stone and Solid State Characterizations

Energy Technology Data Exchange (ETDEWEB)

Asmussen, Robert M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lawter, Amanda R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephenson, John R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Bowden, Mark E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Washton, Nancy M. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Neeway, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Du, Yingge [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Pearce, Carolyn I. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Clayton, Ray E. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Saslow, Sarah A. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Buck, Edgar C. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Cordova, Elsa [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2016-09-28

Washington River Protection Solutions (WRPS) is collecting relevant available data on waste forms for use as a supplemental immobilization technology, to provide the additional capacity needed to treat low-activity waste (LAW) in Hanford Site tanks and complete the tank waste cleanup mission in a timely and cost-effective manner. One candidate supplemental waste form, fabricated using a low-temperature process, is a cementitious grout called Cast Stone. Cast Stone has been under investigation for this application at Pacific Northwest National Laboratory (PNNL) since initial screening tests in FY13. This report is the culmination of work to lower the diffusivities of Tc and I from Cast Stone using getters. Getters are compounds added to a system designed to selectively sequester a species of interest to provide increased stability to the species. The work contained within this report is related to waste form development and testing, and does not directly support the 2017 integrated disposal facility (IDF) performance assessment. However, this work contains valuable information which may be used in performance assessment maintenance past FY17, and in future waste form development. This report on performance characterization of Tc and I getters in Cast Stone fabricated with simulated LAW covers several areas of interest and major findings to WRPS: investigating performance of potassium metal sulfide (KMS-2-SS) and tin (II) apatite (Sn-A) as Tc getters when incorporated into Cast Stone; investigating performance of silver exchanged zeolite (Ag-Z) and argentite (Arg) as I getters when incorporated into Cast Stone; utilizing sequential addition of Tc and I getters to overcome any deleterious interactions between the getters in solution; determining, for the first time, Tc distribution within the cured Cast Stone and its evolution during leaching; and performing solid state characterization of getters and Cast Stone samples to support leach test findings and develop a

Kidney stone erosion by micro scale hydrodynamic cavitation and consequent kidney stone treatment.

Science.gov (United States)

Perk, Osman Yavuz; Şeşen, Muhsincan; Gozuacik, Devrim; Koşar, Ali

2012-09-01

The objective of this study is to reveal the potential of micro scale hydrodynamic bubbly cavitation for the use of kidney stone treatment. Hydrodynamically generated cavitating bubbles were targeted to the surfaces of 18 kidney stone samples made of calcium oxalate, and their destructive effects were exploited in order to remove kidney stones in in vitro experiments. Phosphate buffered saline (PBS) solution was used as the working fluid under bubbly cavitating conditions in a 0.75 cm long micro probe of 147 μm inner diameter at 9790 kPa pressure. The surface of calcium oxalate type kidney stones were exposed to bubbly cavitation at room temperature for 5 to 30 min. The eroded kidney stones were visually analyzed with a high speed CCD camera and using SEM (scanning electron microscopy) techniques. The experiments showed that at a cavitation number of 0.017, hydrodynamic bubbly cavitation device could successfully erode stones with an erosion rate of 0.31 mg/min. It was also observed that the targeted application of the erosion with micro scale hydrodynamic cavitation may even cause the fracture of the kidney stones within a short time of 30 min. The proposed treatment method has proven to be an efficient instrument for destroying kidney stones.

Thermodynamics of ionic processes in solutions

International Nuclear Information System (INIS)

Krestov, G.A.

1984-01-01

The present nitions about the mechanism of solvation of atomic-molecular particles and the structure of electrolyte and non electrolyte solutions are given. From common positions a wide range of interrelated problems (general and thermodynamic characteristic of ions, thermodynamic characteristic of ion solvation and various ionic reactions in solutions, structural changes of the solvent in the above processes etc...) is considered. The latest scientific data including those on the effect on the thermodynamio properties of low temperatures, various impurities (air, water), large ions, peculiarities of the structure of solvent molecules reflected. Considerable attention is given to new conceptions definitions, structural notions as well as theoretical and experimental methods of obtaining quantitative characteristics of ion solvation

The effects of ozone and NO{sub x} on the deterioration of calcareous stone

Energy Technology Data Exchange (ETDEWEB)

Massey, S.W. [Building Research Establishment Ltd, Garston, Watford (United Kingdom)

1999-03-09

This paper looks at the changes in urban air quality and the effect on building materials with particular regard to their deterioration arising from pollution due to vehicles. The paper aims to review basic information on the likely effect of NO{sub x} and ozone on calcareous building materials (limestone, marble, dolomite, calcareous cemented sandstone) by examining experimental and fieldwork relating to the principle reaction of the oxidation of the sulphite to sulphate. NO{sub 2} is only one of many possible oxidants present in the urban and rural environment. A brief synopsis of the effects of other oxidants and inhibitors is given along with a review of the processes involved in aqueous phase oxidation, which seems to be the phase where the reactions take place. Controlling factors in the reaction and oxidation of sulphite to sulphate are the type and porosity of the stone, the level of humidity, the nature of the oxidants and to a lesser extent the presence of other extraneous reactants, e.g. metal oxides, chlorine and ammonia salts. For freshly cut stone unpolished marble is much less reactive than porous limestone and the degree of activity has different relative humidity thresholds. Reaction of the stone with the gaseous compounds occurs during the process of absorption onto the surface. The oxidation is accelerated at the gas-water interface by the presence of NO{sub x}, and seems to depend on the NO{sub 2} component but it is clear that NO{sub x} is only one of many possible oxidants in the urban and rural environments. Correlation studies of the damage to stone materials are unlikely to pick up the effects of NO{sub x} due to the nature of their duration and the rather transient nature of the appearance and removal of nitrates on the stone. Presence of other oxidants and catalysts such as H{sub 2}O{sub 2}, O{sub 2} (catalysed by Fe{sup 3+} and Mn{sup 2+}), OH, HSO{sub 5}{sup -}, SO{sub 4}{sup 2-}, O{sub 3}, HO{sub 2}, NO{sub 2}{sup -}, NO{sub 3}, O

The effects of ozone and NO{sub x} on the deterioration of calcareous stone

Energy Technology Data Exchange (ETDEWEB)

Massey, S.W. [Building Research Establishment Ltd., Garston, Watford (United Kingdom)

1999-03-09

This paper looks at the changes in urban air quality and the effect on building materials with particular regard to their deterioration arising from pollution due to vehicles. The paper aims to review basic information on the likely effect of NO{sub x} and ozone on calcareous building materials (limestone, marble, dolomite, calcareous cemented sandstone) by examining experimental and fieldwork relating to the principle reaction of the oxidation of the sulphite to sulphate. NO{sub 2} is only one of many possible oxidants present in the urban and rural environment. A brief synopsis of the effects of other oxidants and inhibitors is given along with a review of the processes involved in aqueous phase oxidation, which seems to be the phase where the reactions take place. Controlling factors in the reaction and oxidation of sulphite to sulphate are the type and porosity of the stone, the level of humidity, the nature of the oxidants and to a lesser extent the presence of other extraneous reactants, e.g. metal oxides, chlorine and ammonia salts. For freshly cut stone unpolished marble is much less reactive than porous limestone and the degree of activity has different relative humidity thresholds. Reaction of the stone with the gaseous compounds occurs during the process of absorption onto the surface. The oxidation is accelerated at the gas-water interface by the presence of NO{sub x}, and seems to depend on the NO{sub 2} component but it is clear that NO{sub x} is only one of many possible oxidants in the urban and rural environments. Correlation studies of the damage to stone materials are unlikely to pick up the effects of NO{sub x} due to the nature of their duration and the rather transient nature of the appearance and removal of nitrates on the stone. Presence of other oxidants and catalysts such as H{sub 2}O{sub 2}, O{sub 2} (catalysed by Fe{sup 3+} and Mn{sup 2+}), OH, HSO{sub 5}{sup -}, SO{sub 4}{sup 2-}, O{sub 3}, HO{sub 2}, NO{sub 2}{sup -}, NO{sub 3}, O

Compositions of stone and stone surface materials of historical monuments from Vidzeme and Zemgale

International Nuclear Information System (INIS)

Actins, A.; Spricis, A.; Zekunde, A.; Nemerova, A.

2004-01-01

By means of x-ray analysis composition of stone and stone surface materials of historical monuments from Vidzeme and Zemgale was investigated. Corrosion products of tuffa materials were identified on surfaces of some investigated monuments. Similarity of composition of products of stone corrosion for monuments from Latvia and Poland was recognised. Content of heavy metals at stone materials of historical monuments and at the surface layers of these monuments was investigated by means of atomic absorption and potentiometric stripping methods. Reasons of formation of compounds and pollution of investigated samples were discussed. (full text)

Open stone surgery: a still-in-use approach for complex stone burden.

Science.gov (United States)

Çakici, Özer Ural; Ener, Kemal; Keske, Murat; Altinova, Serkan; Canda, Abdullah Erdem; Aldemir, Mustafa; Ardicoglu, Arslan

2017-06-30

Urinary stone disease is a major urological condition. Endourologic techniques have influenced the clinical approach and outcomes. Open surgery holds a historic importance in the management of most conditions. However, complex kidney stone burden may be amenable to successful results with open stone surgery. In this article, we report our eighteen cases of complex urinary stone disease who underwent open stone removal. A total of 1701 patients have undergone surgical treatment for urinary stone disease in our clinic between July 2012 and July 2016, comprising eighteen patients who underwent open stone surgery. Patients' demographic data, stone analysis results, postoperative clinical data, and stone status were evaluated retrospectively. The choice of surgical approach is mostly dependent on the surgeon's preference. In two patients, open surgery was undertaken because of perioperative complications. We did not observe any Clavien-Dindo grade 4 or 5 complications. Three patients were managed with a course of antibiotics due to postoperative fever. One patient had postoperative pleurisy, one patient had urinoma, and two patients had postoperative ileus. Mean operation time was 84 (57-124) minutes and mean hospitalization time was 5.5 (3-8) days. Stone-free status was achieved in 15 patients (83.3%). Endourologic approaches are the first options for treatment of urinary stone disease. However, open stone surgery holds its indispensable position in complicated cases and in complex stone burden. Open stone surgery is also a valid alternative to endourologic techniques in all situations.

Application of Alkaline Ionic Liquids in the Pretreatment Process of Eucalyptus Kraft Pulping

Directory of Open Access Journals (Sweden)

Yi Hou

2016-09-01

Full Text Available In order to explore the potential application of green solvent ionic liquids (ILs in the kraft pulping process, eucalyptus wood was pretreated by [Mmim]DMP before normal pulping. The results showed that materials pretreated shortly by the ionic liquid had a higher yield and viscosity coupled with a lower potassium permanganate value and residual lignin content in the pulp, as a result of the cooking process. It was also inferred that alkaline [Mmim]DMP pretreatment could dissolve lignin effectively from fiber to result in a stronger binding force and more entangled properties. Paper tensile and burst strength were improved by about 40% and 60%, respectively. These results provide a new way for eucalyptus to be utilized in the kraft pulping process.

Bath Stone - a Possible Global Heritage Stone from England

Science.gov (United States)

Marker, Brian

2014-05-01

The Middle Jurassic strata of England have several horizons of oolitic and bioclastic limestones that provide high quality dimension stone. One of the most important is found in and near the City of Bath. The Great Oolite Group (Upper Bathonian) contains the Combe Down and Bath Oolites, consisting of current bedded oolites and shelly oolites, that have been used extensively as freestones for construction nearby, for prestigious buildings through much of southern England and more widely. The stone has been used to some extent since Roman times when the city, then known as Aquae Sulis, was an important hot spa. The stone was used to a limited extent through medieval times but from the early 18th century onwards was exploited on a large scale through surface quarrying and underground mining. The City was extensively redeveloped in the 18th to early 19th century, mostly using Bath Stone, when the spas made it a fashionable resort. Buildings from that period include architectural "gems" such as the Royal Crescent and Pulteney Bridge, as well as the renovated Roman Baths. Many buildings were designed by some of the foremost British architects of the time. The consistent use of this stone gives the City an architectural integrity throughout. These features led to the designation of the City as a World Heritage Site. It is a requirement in current City planning policy documents that Bath Stone should be used for new building to preserve the appearance of the City. More widely the stone was used in major houses (e.g. Buckingham Palace and Apsley House in London; King's Pavilion in Brighton); civic buildings (e.g. Bristol Guildhall; Dartmouth Naval College in Devon); churches and cathedrals (e.g. Truro Cathedral in Cornwall); and engineered structures (e.g. the large Dundas Aqueduct on the Kennet and Avon Canal). More widely, Bath Stone has been used in Union Station in Washington DC; Toronto Bible College and the Town Hall at Cape Town, South Africa. Extraction declined in

Contribution of stone size to chronic kidney disease in kidney stone formers.

Science.gov (United States)

Ahmadi, Farrokhlagha; Etemadi, Samira Motedayen; Lessan-Pezeshki, Mahbob; Mahdavi-Mazdeh, Mitra; Ayati, Mohsen; Mir, Alireza; Yazdi, Hadi Rokni

2015-01-01

To determine whether stone burden correlates with the degree of chronic kidney disease in kidney stone formers. A total of 97 extracorporeal shockwave lithotripsy candidates aged 18 years and older were included. Size, number and location of the kidney stones, along with cumulative stone size, defined as the sum of diameters of all stones) were determined. Estimated glomerular filtration rate was determined using the Chronic Kidney Disease Epidemiology Collaboration cystatin C/creatinine equation, and chronic kidney disease was defined as estimated glomerular filtration rate chronic kidney disease. The relationship persisted even after adjustment for age, sex, body mass index, C-reactive protein, fasting plasma glucose, thyroid stimulating hormone, presence of microalbuminuria, history of renal calculi, history of extracorporeal shockwave lithotripsy, number and location of the stones (odds ratio 1.24, 95% confidence interval 1.02-1.52). The same was not observed for individuals with a cumulative stone size ≥ 20 mm. In kidney stone formers with a cumulative stone size up to 20 mm, estimated glomerular filtration rate linearly declines with increasing cumulative stone size. Additionally, cumulative stone size is an independent predictor of chronic kidney disease in this group of patients. © 2014 The Japanese Urological Association.

Application of the atomic absorption technical to available the concentration of silver ions incorporated in glass matrix by ionic exchange process

International Nuclear Information System (INIS)

Mendes, E.; Silva, K.F.; Teixeira, A.; Silva, L.; Paula, M.M.S.; Angioletto, E.; Riella, H.G.; Fiori, M. A.

2009-01-01

Ion specimens can be incorporated in glasses or natural clays by ionic exchange process with different concentrations dependent of matrix's type and of the ionic exchange parameters. In particular, the incorporation of silver ions presents high interest by its biocidal properties. A compound contending ion silver specimens presents bactericidal and fungicidal properties with effect proportional to ion concentration. This work presents results about application of the atomic absorption technical to determine the silver ion concentration incorporated in a glass matrix by ionic exchange process. The ionic exchange experiments were realized with different AgNO 3 concentration and constant temperature. After ionic exchange process, the glass samples were submitted to characterization by Energy Dispersive X-Ray Spectroscopy and Atomic Absorption Techniques. The comparative results between different techniques showed that atomic absorption technical is adequate to determine ion silver concentration incorporated in the glass matrix after ionic exchange process. (author)

Fasting and Urinary Stones

Directory of Open Access Journals (Sweden)

Ali Shamsa

2013-11-01

Full Text Available Introduction: Fasting is considered as one of the most important practices of Islam, and according to Prophet Mohammad, fasting is obligatory upon Muslims. The aim of this study is to evaluate the effects of fasting on urinary stones. Materials and Methods: Very few studies have been carried out on urinary stones and the effect of Ramadan fasting. The sources of the present study are Medline and articles presented by local and Muslim researchers. Meanwhile, since we are acquainted with three well-known researchers in the field of urology, we contacted them via email and asked for their professional opinions. Results: The results of studies about the relationship of urinary stones and their incidence in Ramadan are not alike, and are even sometimes contradictory. Some believe that increased incidence of urinary stones in Ramadan is related not to fasting, but to the rise of weather temperature in hot months, and an increase in humidity. Conclusion: Numerous biological and behavioral changes occur in people who fast in Ramadan and some researchers believe that urinary stone increases during this month.

Ionic liquids in chemical engineering.

Science.gov (United States)

Werner, Sebastian; Haumann, Marco; Wasserscheid, Peter

2010-01-01

The development of engineering applications with ionic liquids stretches back to the mid-1990s when the first examples of continuous catalytic processes using ionic liquids and the first studies of ionic liquid-based extractions were published. Ever since, the use of ionic liquids has seen tremendous progress in many fields of chemistry and engineering, and the first commercial applications have been reported. The main driver for ionic liquid engineering applications is to make practical use of their unique property profiles, which are the result of a complex interplay of coulombic, hydrogen bonding and van der Waals interactions. Remarkably, many ionic liquid properties can be tuned in a wide range by structural modifications at their cation and anion. This review highlights specific examples of ionic liquid applications in catalysis and in separation technologies. Additionally, the application of ionic liquids as working fluids in process machines is introduced.

Weathering and weathering rates of natural stone

Science.gov (United States)

Winkler, Erhard M.

1987-06-01

Physical and chemical weathering were studied as separate processes in the past. Recent research, however, shows that most processes are physicochemical in nature. The rates at which calcite and silica weather by dissolution are dependent on the regional and local climatic environment. The weathering of silicate rocks leaves discolored margins and rinds, a function of the rocks' permeability and of the climatic parameters. Salt action, the greatest disruptive factor, is complex and not yet fully understood in all its phases, but some of the causes of disruption are crystallization pressure, hydration pressure, and hygroscopic attraction of excess moisture. The decay of marble is complex, an interaction between disolution, crack-corrosion, and expansion-contraction cycies triggered by the release of residual stresses. Thin spalls of granites commonly found near the street level of buildings are generally caused by a combination of stress relief and salt action. To study and determine weathering rates of a variety of commercial stones, the National Bureau of Standards erected a Stone Exposure Test Wall in 1948. Of the many types of stone represented, only a few fossiliferous limestones permit a valid measurement of surface reduction in a polluted urban environment.

Supported ionic liquids: versatile reaction and separation media

DEFF Research Database (Denmark)

Riisager, Anders; Fehrmann, Rasmus; Haumann, Marco

2006-01-01

The latest developments in supported ionic liquid phase (SILP) systems for catalysis and separation technology are surveyed. The SILP concept combines the advantages of homogeneous catalysis with heterogeneous process technology, and a variety of reactions have been studied where supported ionic ...... liquid catalysts proved to be more active and selective than common systems. In separation applications the use of supported ionic liquids can facilitate selective transport of substrates across membranes.......The latest developments in supported ionic liquid phase (SILP) systems for catalysis and separation technology are surveyed. The SILP concept combines the advantages of homogeneous catalysis with heterogeneous process technology, and a variety of reactions have been studied where supported ionic...

INCREASING DEMANDS FOR NATURAL STONES USAGE AROUND THE WORLD

Directory of Open Access Journals (Sweden)

HASAN ÜÇPIRTI

1998-12-01

Full Text Available Due to great demands in construction business, the stone industry has been growing very fast around the world. In fact, the technological iınproveınents on the ınachinery of marble and granite processing plant and quarry in recent years gives impulse to the stone business. According to studies reported� there are recognizable increments on both productions and constructions. Natural stones become driving forces in tl1e countries economy. In this study� so ın e statistical nuınbers for productions and consumption of natural stones will be presented in a base of countries that strongly involve in stone business. The importance of the econoınical impacts of natural stone on countries econoıny wiJI be emphasized. Then, the future of natural stones and its business will be discussed

The "green stones" of Valtellina and Valchiavenna (central Alps, northern Italy)

Science.gov (United States)

Cavallo, Alessandro

2015-04-01

Valtellina and Val Chiavenna (Sondrio, Central Alps, northern Italy) are traditionally areas of production of building and ornamental stones (e.g. Serizzo Ghiandone, Serizzo Valmasino, San Fedelino Granite), and among these the "green stones" have a leading position. These stones had an extensive use in Lombardy, as well as abroad (e.g Switzerland). The "green stones" are related to the two mafic-ultramafic bodies of Valmalenco and Chiavenna, where the two largest quarrying districts of the Province of Sondrio are located. Until the early decades of the XX century, serpentinites (and other lithologies from Valtellina) were also extracted from the erratic boulders of Brianza (north of Milan), but at present time the law protects the few remaining boulders. The extracted and processed materials are various: serpentinites, ophicalcites, soapstones. Even the "Stone of Tresivio", used in the past in important monuments of Valtellina, could be classified among the "green stones" in a broad sense: it is a green chloritic schist with scarce and thin ferriferous calcitic veins, pertaining to the sedimentary "Servino" Formation. In recent times, the ancient quarries of this stone were rediscovered near the homonymous village, a few kilometers from Sondrio. There are also historic reports about other "green stones", used in ancient times, such as the "Stone of Grosio", a chloritic schist, and the "Bormio Prasinite". Currently the extraction and processing of "green stones" occurs mostly in Valmalenco, with 22 active serpentinite quarries and a gross volume of 70000 m3 extracted per year, with a yield of about 50%. The Malenco serpentinite (interpreted as sub-continental mantle rocks) forms a 1-2 km thick tabular body, outcropping over an area of about 170 km2, almost entirely confined within the boundaries of the valley. The antigoritic serpentinites (with variable amounts of olivine, clinopyroxene, chlorite and magnetite) are moderately up to strongly foliated, sometimes

Letters to a Dictionary: Competing Views of Language in the Reception of "Webster's Third New International Dictionary"

Science.gov (United States)

Bello, Anne Pence

2013-01-01

The publication of "Webster's Third New International Dictionary" in September 1961 set off a national controversy about dictionaries and language that ultimately included issues related to linguistics and English education. The negative reviews published in the press about the "Third" have shaped beliefs about the nature of…

Effect of Tamsulosin on Stone Passage for Ureteral Stones: A Systematic Review and Meta-analysis.

Science.gov (United States)

Wang, Ralph C; Smith-Bindman, Rebecca; Whitaker, Evans; Neilson, Jersey; Allen, Isabel Elaine; Stoller, Marshall L; Fahimi, Jahan

2017-03-01

Tamsulosin is recommended for patients receiving a diagnosis of a ureteral stone less than 10 mm who do not require immediate urologic intervention. Because of conflicting results from recent meta-analyses and large randomized controlled trials, the efficacy of tamsulosin is unclear. We perform a systematic review and meta-analysis to investigate the effect of tamsulosin on stone passage in patients receiving a diagnosis of ureteral stone. MEDLINE, EMBASE, and CENTRAL databases were searched without language restriction through November 2015 for studies assessing the efficacy of tamsulosin and using a double-blind, randomized, controlled trial design. Meta-analysis was conducted with a random-effects model and subgroup analyses were conducted to determine sources of heterogeneity. Eight randomized controlled trials (N=1,384) contained sufficient information for inclusion. The pooled risk of stone passage in the tamsulosin arm was 85% versus 66% in the placebo arm, but substantial heterogeneity existed across trials (I 2 =80.2%; Ptamsulosin (risk difference=22%; 95% confidence interval 12% to 33%; number needed to treat=5). The meta-analysis of the small stone subgroup (Tamsulosin significantly improves stone passage in patients with larger stones, whereas the effect of tamsulosin is diminished in those with smaller stones, who are likely to pass their stone regardless of treatment. Copyright © 2016 American College of Emergency Physicians. Published by Elsevier Inc. All rights reserved.

Ionic-Liquid-Mediated Extraction and Separation Processes for Bioactive Compounds: Past, Present, and Future Trends.

Science.gov (United States)

Ventura, Sónia P M; E Silva, Francisca A; Quental, Maria V; Mondal, Dibyendu; Freire, Mara G; Coutinho, João A P

2017-05-24

Ionic liquids (ILs) have been proposed as promising media for the extraction and separation of bioactive compounds from the most diverse origins. This critical review offers a compilation on the main results achieved by the use of ionic-liquid-based processes in the extraction and separation/purification of a large range of bioactive compounds (including small organic extractable compounds from biomass, lipids, and other hydrophobic compounds, proteins, amino acids, nucleic acids, and pharmaceuticals). ILs have been studied as solvents, cosolvents, cosurfactants, electrolytes, and adjuvants, as well as used in the creation of IL-supported materials for separation purposes. The IL-based processes hitherto reported, such as IL-based solid-liquid extractions, IL-based liquid-liquid extractions, IL-modified materials, and IL-based crystallization approaches, are here reviewed and compared in terms of extraction and separation performance. The key accomplishments and future challenges to the field are discussed, with particular emphasis on the major lacunas found within the IL community dedicated to separation processes and by suggesting some steps to overcome the current limitations.

Using Ionic Liquids in Selective Hydrocarbon Conversion Processes

Energy Technology Data Exchange (ETDEWEB)

Tang, Yongchun; Periana, Roy; Chen, Weiqun; van Duin, Adri; Nielsen, Robert; Shuler, Patrick; Ma, Qisheng; Blanco, Mario; Li, Zaiwei; Oxgaard, Jonas; Cheng, Jihong; Cheung, Sam; Pudar, Sanja

2009-09-28

This is the Final Report of the five-year project Using Ionic Liquids in Selective Hydrocarbon Conversion Processes (DE-FC36-04GO14276, July 1, 2004- June 30, 2009), in which we present our major accomplishments with detailed descriptions of our experimental and theoretical efforts. Upon the successful conduction of this project, we have followed our proposed breakdown work structure completing most of the technical tasks. Finally, we have developed and demonstrated several optimized homogenously catalytic methane conversion systems involving applications of novel ionic liquids, which present much more superior performance than the Catalytica system (the best-to-date system) in terms of three times higher reaction rates and longer catalysts lifetime and much stronger resistance to water deactivation. We have developed in-depth mechanistic understandings on the complicated chemistry involved in homogenously catalytic methane oxidation as well as developed the unique yet effective experimental protocols (reactors, analytical tools and screening methodologies) for achieving a highly efficient yet economically feasible and environmentally friendly catalytic methane conversion system. The most important findings have been published, patented as well as reported to DOE in this Final Report and our 20 Quarterly Reports.

Data Package for Secondary Waste Form Down-Selection-Cast Stone

International Nuclear Information System (INIS)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-01-01

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Data Package for Secondary Waste Form Down-Selection—Cast Stone

Energy Technology Data Exchange (ETDEWEB)

Serne, R. Jeffrey; Westsik, Joseph H.

2011-09-05

Available literature on Cast Stone and Saltstone was reviewed with an emphasis on determining how Cast Stone and related grout waste forms performed in relationship to various criteria that will be used to decide whether a specific type of waste form meets acceptance criteria for disposal in the Integrated Disposal Facility (IDF) at Hanford. After the critical review of the Cast Stone/Saltstone literature, we conclude that Cast Stone is a good candidate waste form for further consideration. Cast stone meets the target IDF acceptance criteria for compressive strength, no free liquids, TCLP leachate are below the UTS permissible concentrations and leach rates for Na and Tc-99 are suiteably low. The cost of starting ingredients and equipment necessary to generate Cast Stone waste forms with secondary waste streams are low and the Cast Stone dry blend formulation can be tailored to accommodate variations in liquid waste stream compositions. The database for Cast Stone short-term performance is quite extensive compared to the other three candidate waste solidification processes. The solidification of liquid wastes in Cast Stone is a mature process in comparison to the other three candidates. Successful production of Cast Stone or Saltstone has been demonstrated from lab-scale monoliths with volumes of cm3 through m3 sized blocks to 210-liter sized drums all the way to the large pours into vaults at Savannah River. To date over 9 million gallons of low activity liquid waste has been solidified and disposed in concrete vaults at Savannah River.

Purbeck Stone - A possible Global Heritage Stone from England

Science.gov (United States)

Marker, Brian

2014-05-01

By definition, a Global Heritage Stone Resource (GHSR) should have international significance. The Purbeck Group of uppermost Jurassic to lowermost Cretaceous age (Tithonian- Berriasian) outcrops mainly in the Purbeck area of Dorset, England. It was deposited in shallow freshwater to brackish lagoons with occasional marine incursions. Limestones, mainly biosparites, occur at 6 main levels. Differences in bed thickness, jointing and hardness make it suitable for a variety of purposes including dimension stone, monumental and ornamental stone, roofing tiles, paving, flooring and rockery stone. Near the top of the sequence is a dark gastropod biosparite, traditionally called Purbeck Marble, easily carved, which has been extensively used for decorative interior work in churches and cathedrals particularly for fonts, tombs, flooring and facings on columns for example in the medieval cathedrals of Salisbury, Exeter, Durham, York and Wells and Worcester and Westminster Abbey. The stone was extracted at least from Roman times (1st century AD) through the medieval period. Quarrying expanded from about 1700 reaching a peak in the late 18th and 19th centuries. Stone was transported first by sea but later by rail for wider use. Used in many local buildings, it gives an important element of local character. Many of the villages are designated conservation areas with a requirement for repair, maintenance and new building using local stone. Initially the stone was taken from quarries but was later mined. The number of operating companies declined from 15 to 5 over the past 40 years, with 10 active small quarries. Outputs are from few hundred tonnes to a few thousand tonnes per annum or about 9 to 12 years of permitted reserves but the Planning Authority intends to make sufficient provision for production at recent levels for their development plan period. The extraction sites are in an Area of Outstanding Natural Beauty and close to Jurassic Coast World Heritage Site. This might

Imaging-based logics for ornamental stone quality chart definition

Science.gov (United States)

Bonifazi, Giuseppe; Gargiulo, Aldo; Serranti, Silvia; Raspi, Costantino

2007-02-01

Ornamental stone products are commercially classified on the market according to several factors related both to intrinsic lythologic characteristics and to their visible pictorial attributes. Sometimes these latter aspects prevail in quality criteria definition and assessment. Pictorial attributes are in any case also influenced by the performed working actions and the utilized tools selected to realize the final stone manufactured product. Stone surface finishing is a critical task because it can contribute to enhance certain aesthetic features of the stone itself. The study was addressed to develop an innovative set of methodologies and techniques able to quantify the aesthetic quality level of stone products taking into account both the physical and the aesthetical characteristics of the stones. In particular, the degree of polishing of the stone surfaces and the presence of defects have been evaluated, applying digital image processing strategies. Morphological and color parameters have been extracted developing specific software architectures. Results showed as the proposed approaches allow to quantify the degree of polishing and to identify surface defects related to the intrinsic characteristics of the stone and/or the performed working actions.

Ionic liquid processing of cellulose.

Science.gov (United States)

Wang, Hui; Gurau, Gabriela; Rogers, Robin D

2012-02-21

Utilization of natural polymers has attracted increasing attention because of the consumption and over-exploitation of non-renewable resources, such as coal and oil. The development of green processing of cellulose, the most abundant biorenewable material on Earth, is urgent from the viewpoints of both sustainability and environmental protection. The discovery of the dissolution of cellulose in ionic liquids (ILs, salts which melt below 100 °C) provides new opportunities for the processing of this biopolymer, however, many fundamental and practical questions need to be answered in order to determine if this will ultimately be a green or sustainable strategy. In this critical review, the open fundamental questions regarding the interactions of cellulose with both the IL cations and anions in the dissolution process are discussed. Investigations have shown that the interactions between the anion and cellulose play an important role in the solvation of cellulose, however, opinions on the role of the cation are conflicting. Some researchers have concluded that the cations are hydrogen bonding to this biopolymer, while others suggest they are not. Our review of the available data has led us to urge the use of more chemical units of solubility, such as 'g cellulose per mole of IL' or 'mol IL per mol hydroxyl in cellulose' to provide more consistency in data reporting and more insight into the dissolution mechanism. This review will also assess the greenness and sustainability of IL processing of biomass, where it would seem that the choices of cation and anion are critical not only to the science of the dissolution, but to the ultimate 'greenness' of any process (142 references).

Dr Jerome Pierce Webster (1888-1974): Surgeon, historian, campaigner, and 'the father of plastic surgery education'.

Science.gov (United States)

Wigley, Catrin H

2016-09-28

Dr Jerome Pierce Webster is best remembered as the 'founder of plastic surgery education in the United States' on the basis of developing his nation's first plastic surgery residency programme, his role in the founding of the American Board of Plastic Surgery, and, more generally, his influence in professionalising this subspecialty. He also deserves to be remembered for his extensive missionary work in China, his publications as a successful bibliographer, and as an accomplished historian. © The Author(s) 2016.

Comparison of Different Methods of Denim Stone Washing by Pumice Stone, Acid Cellulases and Neutral Cellulases

Directory of Open Access Journals (Sweden)

M. Montazer

2007-10-01

Full Text Available Denim is a casual garment normally used by young people and extremely influential in shaping the fashion industry. Among various garments, these garments are subjected to innovations. This work is an attempt to compare the different methods of stone washing using pumice stones, acid cellulases and neutral cellulases or in combination of these methods. The effects of different processing conditions on the garment are compared and reported. Color differences of samples are probed by reflective colorimeter on the front side as well as the backside and also the white pocket of the garment.The abrasion resistance, tensile strength and crease recovery angle of samples are also reported. The XRD spectra are used to calculate the crystalline degrees of the selected samples. Moreover, fiber surfaces of some treated samples have been observed by SEM. The results indicate that treatment of denim with pumice stone with equal weight of garment causes a small color differences. The addition of cellulases to the washing, however, accelerates the color fading. Also, lower staining observed on the white pocket when the garment was treated with cellulases. However, the neutralcellulases increase the garment fading and decrease the staining on the white pocket. It is also observed that pumice stone with cellulases damages the fabric surface, although it is of a minimal damage.

Process for carrying out a chemical reaction with ionic liquid and carbon dioxide under pressure

NARCIS (Netherlands)

Kroon, M.C.; Shariati, A.; Florusse, L.J.; Peters, C.J.; Van Spronsen, J.; Witkamp, G.J.; Sheldon, R.A.; Gutkowski, K.I.

2006-01-01

The invention is directed to a process for carrying out a chemical reaction in an ionic liquid as solvent and CO2 as cosolvent, in which process reactants are reacted in a homogeneous phase at selected pressure and temperature to generate a reaction product at least containing an end-product of the

Correlation between Copper, Zinc and some lipids in serum, bile and stones of patients with gall stone disease

International Nuclear Information System (INIS)

Abu-Farsakh, F.

1997-01-01

Measurements of Cu, Zn and some lipid concentrations were carried out in serum, bile and gall stone samples collected from 76 patients undergoing surgery for removal of gall stones. The results showed that Cu and Zn were present in micromolar concentration in bile (average Cu concentration = 13.4 ± 0.92, average Zn concentration = 13.4 ± 1.05) and gall stones (average Cu concentration = 2.8 ± 0.16, average Zn concentration = 1.8 ± 0.16 mmol/ g stone). Cross-tabulation of the results showed significant positive linear correlations (p< 0.01) between stone Zn vs. bile cholesterol (r = 0.253), stone Zn vs. bile bilirubin (r = 0.396) (in mixed stones only). This suggested that the more hydrophobic the bile sample, the more Zn co-precipitate with cholesterol or bilirubin. (author). 17 refs., 3 tabs

Acute management of stones

DEFF Research Database (Denmark)

Jung, Helene; Osther, Palle J S

2015-01-01

INTRODUCTION: Stone management is often conservative due to a high spontaneous stone passage rate or non-symptomatic calyceal stones that do not necessarily require active treatment. However, stone disease may cause symptoms and complications requiring urgent intervention. MATERIAL AND METHODS: I...... with careful consideration of stone size and location, symptoms, patient comorbidity and radiation dose. CONCLUSION: In case of infective hydronephrosis, compromised renal function or persistent pain despite adequate analgesic treatment acute intervention is indicated....

Benefits to Minnesotans of communications infrastructure public-private partnership

Science.gov (United States)

1997-06-01

This paper presents a summary of the benefits of a communications infrastructure public-private partnership between the Minnesota Department of Transportation and the team of International Communications Systems (ICS) and Stone & Webster.

Treatment of gallbladder stone with common bile duct stones in the laparoscopic era

OpenAIRE

Zhang, Wei-jie; Xu, Gui-fang; Huang, Qin; Luo, Kun-lun; Dong, Zhi-tao; Li, Jie-ming; Wu, Guo-zhong; Guan, Wen-xian

2015-01-01

Background: Laparoscopic common bile duct exploration (LCBDE) for stone can be carried out by either laparoscopic transcystic stone extraction (LTSE) or laparoscopic choledochotomy (LC). It remains unknown as to which approach is optimal for management of gallbladder stone with common bile duct stones (CBDS) in Chinese patients. Methods: From May 2000 to February 2009, we prospective treated 346 consecutive patients with gallbladder stones and CBDS with laparoscopic cholecystectomy and LCBDE....

Use of the probability of stone formation (PSF) score to assess stone forming risk and treatment response in a cohort of Brazilian stone formers

OpenAIRE

Turney, Benjamin; Robertson, William; Wiseman, Oliver; Amaro, Carmen Regina P. R.; Leitão, Victor A.; Silva, Isabela Leme da; Amaro, João Luiz

2014-01-01

Introduction: The aim was to confirm that PSF (probability of stone formation) changed appropriately following medical therapy on recurrent stone formers.Materials and Methods: Data were collected on 26 Brazilian stone-formers. A baseline 24-hour urine collection was performed prior to treatment. Details of the medical treatment initiated for stone-disease were recorded. A PSF calculation was performed on the 24 hour urine sample using the 7 urinary parameters required: voided volume, oxalate...

Assessment of very high-temperature reactors in process applications. Appendix III. Engineering evaluation of process heat applications for very-high temperature reactors

International Nuclear Information System (INIS)

Wiggins, D.S.; Williams, J.J.

1977-04-01

An engineering and economic evaluation is made of coal conversion processes that can be coupled to a very high-temperature nuclear reactor heat source. The basic system developed by General Atomic/Stone and Webster (GA/S and W) is similar to the H-coal process developed by Hydrocarbon Research, Inc., but is modified to accommodate a nuclear heat source and to produce synthetic natural gas (SNG), synthesis gas, and hydrogen in addition to synthetic crude liquids. The synthetic crude liquid production is analyzed by using the GA/S and W process coupled to either a nuclear- or fossil-heat source. Four other processes are included for comparison: (1) the Lurgi process for production of SNG, (2) the Koppers-Totzek process for production of either hydrogen or synthesis gas, (3) the Hygas process for production of SNG, and (4) the Westinghouse thermal-chemical water splitting process for production of hydrogen. The production of methanol and iron ore reduction are evaluated as two potential applications of synthesis gas from either the GA/S and W or Koppers-Totzek processes. The results indicate that the product costs for each of the gasification and liquefaction processes did not differ significantly, with the exception that the unproven Hygas process was cheaper and the Westinghouse process considerably more expensive than the others

Pancreatic Stones: Treat or Ignore?

Directory of Open Access Journals (Sweden)

DA Howell

1999-01-01

Full Text Available Painful, chronic pancreatitis is of complex etiology, but increasing clinical experience suggests that removal of pancreatic duct stones in many cases significantly improves patients’ symptoms. The development and refinement of therapeutic endoscopic retrograde choledochopancreatography have permitted improved access to the pancreatic duct, which makes the development of new techniques of stone fragmentation and fragment removal a much more successful nonsurgical intervention. A major step forward has been the understanding of the safety and efficacy of pancreatic sphincterotomy, which is necessary for the removal of these difficult stones. The recognition that extracorporeal shock wave lithotripsy can be delivered safely with good efficacy has revolutionized the nonsurgical management of pancreatic duct stones. Nevertheless, advanced and sophisticated therapeutic endoscopy is necessary to achieve clearance of the duct, which can generally be accomplished in the majority of selected patients. State-of-the-art treatments are described, and some new approaches using pancreatoscopy and electrohydrolic lithotripsy are discussed. Newly recognized long term complications are reviewed. Finally, it must be recognized that chronic pancreatitis is an ongoing disease that does not have a simple treatment or cure, and frequently represents a process of remissions and relapses requiring interventions and problem solving.

Kidney Stones (For Parents)

Science.gov (United States)

... Staying Safe Videos for Educators Search English Español Kidney Stones KidsHealth / For Parents / Kidney Stones What's in ... other treatments to help remove the stones. How Kidney Stones Form It's the kidneys' job to remove ...

Anisotropy indices and the effects on the hydric behaviour of natural stone

Science.gov (United States)

Fort, Rafael; Alvarez de Buergo, Monica; Varas, Maria Jose; Gomez-Heras, Miguel

2010-05-01

Building stone is an anisotropic material. Each type of rock (granite, limestone, slate, marble, etc.) has a different anisotropy, which is related to its own geological history, i.e. formation conditions and alteration processes. Knowing the anisotropy of natural stone is a matter of interest for determining the most adequate way to extract it from the quarry, for a better use during its manufacture or processing, to determine the quality of elements to be used as ashlars/masonry or as ornamental elements carving, as well to their arrangement in a structure. At the same time, materiaĺs anisotropy will condition the placing of, for instance, anchorages in dressing stone slabs. Anisotropy of natural stone controls water entry and its mobility, together with atmospheric pollutantśs, processes that favour the stone decay in building works, mainly those that shows a marked directional component, as it is the case of capillary water absorption. Water tends to be absorbed differently along the distinct main anisotropy directions, which are principally marked due to the arrangement and distribution of porosity in the rock. The aim of this study is to perform a comparative analysis of the various anisotropy indices commonly used when dealing with natural stone, determined by ultrasonic propagation techniques, in order to establish how anisotropy (by means of these indices) affect the process of capillary water absorption. Different type of natural stones have been selected, according to their traditional use for the construction of buildings in the region of Madrid (Spain). Their petrophysical properties have been determined (density, porosity, water absorption, etc), as well as ultrasonic transmission velocity has been measured along the three spatial directions of the test specimens (from 50 to 100 for each petrological type). According to this, the stone specimens were classified in different anisotropy levels or classes. Results show that stones with the highest

Simplified methods for the evaluation of the risk of forming renal stones and the follow-up of stone-forming propensity during the preventive treatment of stone-formation.

Science.gov (United States)

Grases, Fèlix; Costa-Bauzá, Antonia

2016-02-01

Renal lithiasis is a complex multifactorial disease in which recurrence is common. Thus, simple and reliable procedures are needed to evaluate patients with previous kidney stones to determine the risk of recurrence. In this paper we review simple biochemical procedures that can be used to determine the risk for renal stone formation when the stone is available or unavailable for analysis. Our present knowledge of renal lithiasis indicates that renal stones form due to several well-defined factors. Analysis of the renal stone itself can provide important information about clinical factors that require further investigation. When the stone is unavailable, it is necessary to perform a general evaluation of main urinary risk factors associated to renal stone formation, but this study should be complemented considering information related to direct familial antecedents, recidivant degree, radiological images, medical history, and life style habits. Finally, tools for patient follow-up of stone-forming propensity during the preventive treatment are discussed .

Cathodoluminescence of GaN diped with Zn in the process of epitaxial growth and by the method of ionic implantation

International Nuclear Information System (INIS)

Khasanov, I.Sh.; Gippius, A.A.; Kuznetsov, A.V.; Petrov, M.N.; Sletov, M.M.

1984-01-01

The cathodoluminescence (CL) method was used to investigate the epitaxial GaN layers doped with Zn both in the process of growth and by the method of ionic implantation for the purpose of clarifying the effect of doping technique on impurity luminescence. It was shown that (2-3)x10 18 cm -3 concentration is optimal with respect to intensity of impurity ''blue'' luminescence for gallium nitride doped with Zn. The intensity of GaN ''blue'' luminescence during Zn ionic implantation is several times lower as compared with doping in the process of growth. This is related to incomplete optical activation of impurity atoms in the process of postimplantation thermal annealing. Increase of zinc concentration above optimal during ionic implantation intensifies crystal lattice disordering, which is supported by intensification of 1.7 eV cathodoluminescence band in spectra conditioned by defects

Systematic screening methodology and energy efficient design of ionic liquid-based separation processes

DEFF Research Database (Denmark)

Kulajanpeng, Kusuma; Suriyapraphadilok, Uthaiporn; Gani, Rafiqul

2016-01-01

in size of the target solute was investigated using the same separation process and IL entrainer to obtain the same product purity. The proposed methodology has been evaluated through a case study of binary alcoholic aqueous azeotropic separation: water+ethanol and water+isopropanol.......A systematic methodology for the screening of ionic liquids (ILs) as entrainers and for the design of ILs-based separation processes in various homogeneous binary azeotropic mixtures has been developed. The methodology focuses on the homogeneous binary aqueous azeotropic systems (for example, water...

Membrane separation of ionic liquid solutions

Science.gov (United States)

Campos, Daniel; Feiring, Andrew Edward; Majumdar, Sudipto; Nemser, Stuart

2015-09-01

A membrane separation process using a highly fluorinated polymer membrane that selectively permeates water of an aqueous ionic liquid solution to provide dry ionic liquid. Preferably the polymer is a polymer that includes polymerized perfluoro-2,2-dimethyl-1,3-dioxole (PDD). The process is also capable of removing small molecular compounds such as organic solvents that can be present in the solution. This membrane separation process is suitable for drying the aqueous ionic liquid byproduct from precipitating solutions of biomass dissolved in ionic liquid, and is thus instrumental to providing usable lignocellulosic products for energy consumption and other industrial uses in an environmentally benign manner.

Lioz: The Stone that made Lisbon reborn - A Global Heritage Stone Resource Proposal

Science.gov (United States)

Lopes, Luis

2017-04-01

Lioz: The Stone that made Lisbon reborn - A Global Heritage Stone Resource Proposal Explored since the Roman Period, the Lioz (Cenomanian age microcrystalline fossiliferous limestone) is the main stone used in the buildings and monuments of Lisbon. After the great cataclysm of 1755 (earthquake, tsunami and fire) of 1755, the already known great quality and the near occurrence of these limestones were wisely used in the great reconstruction of the "Capital do Império" (Capital of the Empire). At the time, Lisbon was one of the largest European cities and great business center of the World, so the necessary and urgent reconstruction was not so difficult to start. Sebastião José de Carvalho e Melo, better known as "Marquês de Pombal", Secretary of King José I, successfully took up the challenge of rebuilding Lisbon. Inside the actual Portuguese capital geographical limits, several quarries of the Cretaceous limestone were explored; some still exist and are classified as geomonuments (i.e., Rio Seco Geomonument, 38 ° 42'21 .67''N; 9 ° 11 '30.37''W). As the City boundaries expanded, the quarries stopped and now there is no one asset in Lisbon. The most important exploitation and processing Lioz stone center was situated in Pêro Pinheiro, 20 km NW of Lisbon. Most of the stones used in the National Palace-Convent of Mafra (1717) belongs to the four main types of Lioz (the cream/white "Abancado", the pink/dark pink "Encarnadão", the yellow "Amarelo de Negrais" and the blueish grey "Azulino"), either cut "against" (perpendicular to the bedding plane) or "along" (parallel to the bedding plane). The orientation stone cut deeply controls texture and mechanical properties of the rocks that behaves as different ones were considered. In the last two decades, the Lioz extraction was almost extinguished. However, some of the old quarries was reactivated and produces first quality blocks needed both for new works and restoration of historic buildings and monuments. The

A study on the utilization of stone powder sludge (III)

Energy Technology Data Exchange (ETDEWEB)

Kim, Chi Kwon; Sohn, Jeong Soo; Kim, Byung Gyu [Korea Institute of Geology Mining and Materials, Taejon (Korea, Republic of)

1996-12-01

This study was performed to activate the building stone industry by increasing the recycling amounts of waste resources and minimizing the generation of the environmental pollution materials. In order to utilize the waste stone and stone powder sludge generated from the domestic quarry and cutting process of stone plates, the manufacturing technology of the artificial stone plate as a building material was developed. Based on the first and second year results, this third-year study was performed for manufacturing the large-scale artificial stone plate of 500 x 500 x 20 mm. Also for applying these artificial stone plates to the flooring and interior materials in the building industry, the manufacture of the large-scale artificial stone plates with various patterns and colors was carried out by changing the species and the ratio of raw materials, amounts of binder and molding pressure. Artificial stone plate was composed of waste crushed stone, stone powder sludge and binder which was used for binding waste stone and rock powder each other. In order to investigate the physical properties of large-scale artificial stone, the measure of specific gravity, absorption ratio, P-wave velocity, compressive strength, tensile strength, Young`s modulus, and Poisson`s ratio were carried out. As a result of testing physical properties, there was no difference between small-scale artificial stone and large-scale one. At the optimum conditions it was shown that the properties of artificial stones were as follows, 2.32 of specific gravity, 0.33 of water-absorption ratio, 780 kg/cm{sup 2} of compressive strength and 98 kg/cm{sup 2} of tensile strength. Based on the above results, the preliminary economic estimation on the manufacture of the artificial stone plate was carried out. It was shown that the manufacturing cost of the artificial stone plate was 18,000 won/m{sup 2}, which was merely half that of natural stone plate, and the application of these on the building stone industry

Flow and edge scour in current adjacent to stone covers

DEFF Research Database (Denmark)

Petersen, Thor U.; Sumer, B. Mutlu; Bøgelund, Jon

2015-01-01

This paper presents the results of an experimental investigation on edge scour adjacent to a stone cover laid on a sandy bed. The three-dimensional flow over the edge of the stone layer has been investigated by the use of particle image velocimetry. The flow measurements show a significant amount...... of turbulence in the primary flow near the junction between the stone layer and the sand bed and the formation of complex secondary-flow structures. The results show that the flow and the edge scour process in a steady current are governed by the size of the roughness elements and to some extent the side slope...... of the berm. The edge scour is caused by the combined action of the primary flow and the secondary flow. The primary flow stirs up the sediment and puts it into suspension, and the secondary flow carries it away from the junction between the stone layer and the sand bed, resulting in a scour hole forming...

Retrograde intrarenal stone surgery for extracorporeal shock-wave lithotripsy-resistant kidney stones

DEFF Research Database (Denmark)

Jung, Helene; Nørby, Bettina; Osther, Palle Jörn

2006-01-01

OBJECTIVE: The newer flexible ureteroscopes, 150-200-microm holmium YAG laser fibres and superflexible Dormia baskets have made it possible to reach and treat stones in all parts of the kidney. The object of this evaluation was to study the outcome of retrograde intrarenal stone surgery (RIRS......) for extracorporeal shock-wave lithotripsy (ESWL)-resistant kidney stones. MATERIAL AND METHODS: A total of 38 consecutive patients (18 males, 20 females) participated in the study. All patients had undergone ESWL prior to RIRS without success. In all cases the stones could be reached with the endoscope. Calculi...... ranged in size from 3 to 20 mm (mean 9 mm). In 32 cases the stones were fragmented using a holmium YAG laser and in six the stones could be extracted using zero-tip Dormia baskets without fragmentation. Sixteen patients had lower calyceal calculi and eight had an abnormal anatomy of the upper urinary...

Kidney stones - self-care

Science.gov (United States)

... self-care; Nephrolithiasis and self-care; Stones and kidney - self-care; Calcium stones and self-care; Oxalate ... provider or the hospital because you have a kidney stone. You will need to take self-care ...

Ionic liquids, tuneable solvents for intensifying reactions and separations

NARCIS (Netherlands)

Meindersma, G.W.; Kuipers, N.J.M.; Haan, de A.B.

2007-01-01

An Ionic Liquid (IL), or a Room Temperature Ionic Liquid (RTIL), is commonly defined as a liquid entirely composed of ions, which is a fluid below 100 °C. Due to the fact that an ionic liquid is a salt, it has a negligible vapour pressure. Therefore, ionic liquids are not volatile at ambient process

Lessons from a Stone Farm

Science.gov (United States)

Kavanagh, John P.; Rao, P. Nagaraj

2007-04-01

The stone farm is a system for measuring macroscopic stone growth of 12 calcium stones simultaneously. It is based on mixed suspension, mixed product removal continuous crystallization principles and the stones are grown continuously for about 500 hours or more. The growth of the stones follows a surface area dependent pattern and the growth rate constants are very similar irrespective of whether the stating materials are fragments of human stone or pieces of marble chip. Increasing citrate from 2mM to 6mM caused a significant growth inhibition which persisted in the presence of urinary macromolecules. Phytate was a very effective inhibitor (about 50% at sub-μM concentrations) but the effective concentration was increased by an order of magnitude in the presence of urinary macromolecules. The effective concentration for inhibition in a crystallization assay was a further two orders of magnitude higher. Urinary macromolecules or almost whole urine were also strongly inhibitory although neither human serum albumin nor bovine mucin had any great effect. The relationship between the size distribution of crystals in suspension and the stone enlargement rate suggests that the primary enlargement mechanism for these in vitro stones is through aggregation. The stone farm is a powerful tool with which to study crystallization inhibitors in a new light. Some differences between inhibition of crystallization and inhibition of stone growth have emerged and we have obtained quantitative evidence on the mechanism of stone enlargement in vitro. Our findings suggest that the interface between crystals in suspension and the stone surface is the key to controlling stone enlargement.

The erosion of carbonate stone by acid rain: Laboratory and field investigations

Science.gov (United States)

Baedecker, P.A.; Reddy, M.M.

1993-01-01

One of the goals of research on the effects of acidic deposition on carbonate stone surfaces is to define the incremental impact of acidic deposition relative to natural weathering processes on the rate of carbonate stone erosion. If rain that impacts carbonate stone surfaces is resident on the surface long enough to approach chemical equilibrium, the incremental effect of hydrogen ion is expected to be small (i.e., 6% for a rain of pH 4.0). Under nonequilibrium (i.e., high flow rate) conditions, kinetic considerations suggest that the incremental effect of hydrogen ion deposition could be quite significant. Field run-off experiments involving the chemical analysis of rain collected from inclined stone slabs have been used to evaluate stone dissolution processes under ambient conditions of wet and dry deposition of acidic species. The stoichiometry of the reaction of stone with hydrogen ion is difficult to define from the field data due to scatter in the data attributed to hydrodynamic effects. Laboratory run-off experiments show that the stoichiometry is best defined by a reaction with H+ in which CO2 is released from the system. The baseline effect caused by water in equilibrium with atmospheric CO2 is identical in the field and in laboratory simulation. The experiments show that the solutions are close enough to equilibrium for the incremental effect of hydrogen ion to be minor (i.e., 24% for marble for a rain of pH 4.0) relative to dissolution due to water and carbonic acid reactions. Stone erosion rates based on physical measurement are approximately double the recession rates that are due to dissolution (estimated from the observed calcium content of the run-off solutions). The difference may reflect the loss of granular material not included in recession estimates based on the run-off data. Neither the field nor the laboratory run-off experiments indicate a pH dependence for the grain-removal process.

The Potential of Tree Fruit Stone and Seed Wastes in Greece as Sources of Bioactive Ingredients

OpenAIRE

Stella A. Ordoudi; Christina Bakirtzi; Maria Z. Tsimidou

2018-01-01

The inedible part (stones, husks, kernels, seeds) of the tree fruits that are currently processed in various regions of Greece constitutes a huge portion of the fruit processing solid waste that remains underexploited. In this review, the existing scientific background for the composition and content of fruit stone and seed in bioactive ingredients is highlighted for olives, stone fruits and citrus fruits that represent the economically most important tree crop products of the country. The co...

The erosion of carbonate stone by acid rain: Laboratory and field investigations

International Nuclear Information System (INIS)

Baedecker, P.A.; Reddy, M.M.

1993-01-01

This paper describes a laboratory experiment on the effects of acidic deposition on carbonate stone erosion. It can serve as the basis for an undergraduate (or pre college) experiment in environmental chemistry. Recent field investigations are described that provide measurements of carbonate stone dissolution and mechanical erosion under weathering conditions that are prevalent in the eastern US. The purpose of the laboratory work is to answer questions concerning the effects of hydrogen ion deposition on stone erosion processes that were difficult to resolve on the basis of field experiments alone

Biopolymer Processing Using Ionic Liquids

Science.gov (United States)

2014-08-07

polymerization. Chitin is not only the main component of the shells of crustaceans, but also exists as a structural polysaccharide of insects, mushrooms...combination of the dissolution of the biomass with the acid catlaysts to depolymerize the biomass into feedstock type chemicals. By using an imidazolium...Technical Section Technical Objective Ionic liquids have demonstrated the ability to effectively dissolve biomass ,1,2 including chitin and

Study of process variables on organophilization of Cubati-PB bentonite clays with ionic surfactants

International Nuclear Information System (INIS)

Silva, C.D. da; Lima, R.C.O.; Costa, J.M.R.; Silva, E.I.A.; Neves, G.A.; Ferreira, H.C.

2012-01-01

The organophilic clays used as agent in the composition dispersed in petroleum drilling fluids, play important roles during drilling. This work aims at the development of several varieties of smectites Cubati-PB for use in drilling fluids for oil with the use of ionic surfactants. We used the following materials: natural bentonite clay Cinza Superior and Verde Superior, from the district of Cubati-PB and ionic quaternary ammonium salt: Praepagen WB®, with 45% active matter. The organoclays were characterized by the laser diffraction, chemical composition by x-ray, differential thermal analysis, thermal gravimetric analysis and x-ray diffraction. Globally found that clays have diffraction and thermal behavior typical of bentonite clay. The results showed showed that the clay used has the potential for application in the process of organophilic and, with respect the process variables has been observed that they do not alter the process organophilization. (author)

The relationship between serum and urinary Fetuin-A levels and kidney stone formation among kidney stone patients.

Science.gov (United States)

Mehrsai, Abdolrasoul; Guitynavard, Fateme; Nikoobakht, Mohammad Reza; Gooran, Shahram; Ahmadi, Ayat

2017-01-01

Mineralization inhibitors are required to prevent the precipitation of minerals and inhibit the formation of kidney stones and other ectopic calcifications. In laboratory studies, Fetuin-A as a glycoprotein has inhibited hydroxyapatite precipitation in calcium and phosphate supersaturated solutions; however, information about patients with kidney stones is limited. The aim of this study was to investigate the association of serum and urinary Fetuin-A levels with calcium oxalate kidney stones. In this case-control study, 30 patients with kidney stones and 30 healthy individuals without any history of urolithiasis who were referred to the urology ward of Sina Hospital of Tehran, Iran, in 2015 were entered into the study. All patients underwent computerized tomography scans. After collecting demographic information, serum and urine levels of Fetuin-A and some other calcification inhibitors and promoters, were measured and compared using T-test, Mann-Whitney and logistic regression between the two study groups. Patients with kidney stones, on average, had lower levels of Serum Fetuin-A (1522.27 ±755.39 vs. 1914.64 ±733.76 μg/ml; P = 0.046) as well as lower levels of Urine Fetuin-A (944.62 ±188.5 vs. 1409.68 ±295.26 μg/ml; P <0.001). Multivariate logistic analysis showed that urinary calcium and serum creatinine are the risk factors and Fetuin-A is a urinary protective factor for kidney stones. PFC Our study showed that patients with kidney stones had lower serum and urinary levels of Fetuin-A. In the logistic regression model, urinary Fetuin-A was reported as a protective factor for kidney stones.

77 FR 27245 - Big Stone National Wildlife Refuge, Big Stone and Lac Qui Parle Counties, MN

Science.gov (United States)

2012-05-09

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R3-R-2012-N069; FXRS1265030000S3-123-FF03R06000] Big Stone National Wildlife Refuge, Big Stone and Lac Qui Parle Counties, MN AGENCY: Fish and... plan (CCP) and environmental assessment (EA) for Big Stone National Wildlife Refuge (Refuge, NWR) for...

Stability of Reshaping Breakwaters with Special Reference to Stone Durability

OpenAIRE

Frigaard, Peter; Hald, Tue; Burcharth, H. F.; Sigurdarson, S.

1998-01-01

Traditionally, conventional rubble mound breakwaters are designed with stable armour units, and consequently, very large stones or even artificial armour units are required. Reshaping breakwater designs allow reshaping of the seward slope thus involving stone movements. Ultimately, dependent on the degree of safety in the design, this reshaping process might end up in a stable profile where no changes in the cross sections occur even though stone movements are allowed.Unfortunately, large mov...

Recent applications of ionic liquids in the sol-gel process for polymer-silica nanocomposites with ionic interfaces

Czech Academy of Sciences Publication Activity Database

Donato, K. Z.; Matějka, Libor; Mauler, R. S.; Donato, R. K.

2017-01-01

Roč. 1, č. 1 (2017), s. 1-25, č. článku 5. E-ISSN 2504-5377 Institutional support: RVO:61389013 Keywords : ionic liquids * sol-gel * ionic interfaces Subject RIV: CD - Macromolecular Chemistry OBOR OECD: Polymer science

Picosecond radiolysis of ionic liquids

International Nuclear Information System (INIS)

Funston, A.M.; Wishart, J.F.; Neta, P.; Lall, S.I.; Engel, R.

2003-01-01

Ionic liquids (ILs) are a rapidly expanding family of condensed-phase media with important applications in nuclear fuel and waste processing, energy production, improving the efficiency and safety of industrial chemical processes, and pollution prevention. Ionic liquids are completely nonvolatile, noncombustible, highly conductive, recyclable and capable of dissolving a wide variety of materials. An understanding of the radiation chemistry of ionic liquids is important for development of their applications in radioactive material processing and for the application of pulse radiolysis techniques to the general study of chemical reactivity in ionic liquids. Kinetic studies with a picosecond electron accelerator, such as the BNL Laser-Electron Accelerator Facility (LEAF), allow one to observe primary radiation products and their reactions on short time scales. For example, the solvated electron lifetime in neat methyltributylammonium bis(trifluoromethylsulfonyl)imide is ∼300 ns and its absorption maximum is ∼1400 nm. Kinetic studies of primary radiolytic products and their reactivities will be described for several types of ionic liquids. Supported in part by the U.S. Department of Energy, Division of Chemical Sciences, Office of Basic Energy Sciences, under contract DE-AC02-98-CH1088

Treatment of gallbladder stone with common bile duct stones in the laparoscopic era.

Science.gov (United States)

Zhang, Wei-jie; Xu, Gui-fang; Huang, Qin; Luo, Kun-lun; Dong, Zhi-tao; Li, Jie-ming; Wu, Guo-zhong; Guan, Wen-xian

2015-01-26

Laparoscopic common bile duct exploration (LCBDE) for stone can be carried out by either laparoscopic transcystic stone extraction (LTSE) or laparoscopic choledochotomy (LC). It remains unknown as to which approach is optimal for management of gallbladder stone with common bile duct stones (CBDS) in Chinese patients. From May 2000 to February 2009, we prospective treated 346 consecutive patients with gallbladder stones and CBDS with laparoscopic cholecystectomy and LCBDE. Intraoperative findings, postoperative complications, postoperative hospital stay and costs were analyzed. Because of LCBDE failure,16 cases (4.6%) required open surgery. Of 330 successful LCBDE-treated patients, 237 underwent LTSE and 93 required LC. No mortality occurred in either group. The bile duct stone clearance rate was similar in both groups. Patients in the LTSE group were significantly younger and had fewer complications with smaller, fewer stones, shorter operative time and postoperative hospital stays, and lower costs, compared to those in the LC group. Compared with patients with T-tube insertion, patients in the LC group with primary closure had shorter operative time, shorter postoperative hospital stay, and lower costs. In cases requiring LCBDE, LTSE should be the first choice, whereas LC may be restricted to large, multiple stones. LC with primary closure without external drainage of the CBDS is as effective and safe as the T-tube insertion approach.

Prostatic stones: evidence of a specific chemistry related to infection and presence of bacterial imprints.

Directory of Open Access Journals (Sweden)

Arnaud Dessombz

Full Text Available Prostatic stones are a common condition in older men in industrialized countries. However, aging appears not to be the unique pathogenesis of these calcifications. Our morpho-constitutional investigation of 23 stone samples suggested that infection has a significant role in the lithogenic process of prostate calcifications, even without detection of infection by clinical investigation. Most stones (83% showed bacterial imprints and/or chemical composition, suggestive of a long-term infection process. Chronic infection may induce persistent inflammation of the tissue and secondarily, a cancerization process within a few years. Thus, the discovery of prostate calcifications by computerized tomodensitometry, for example, might warrant further investigation and management to search for chronic infection of the prostate gland.

Everybody Must Get Stones

Directory of Open Access Journals (Sweden)

Timothy Darvill

2009-09-01

Full Text Available It is now widely recognised that monument building in the fourth and third millennia cal BC often involved transporting selected blocks of preferred stone many kilometres over difficult terrain. Some structures incorporated blocks from several different sources, brought together as an ensemble in much the same way perhaps that assemblages of flint and stone axes reflect both local and distant sources. This article explores alternative models accounting for the selection of stones, contrasting those that foreground symbolic attachments and imposed meanings with those that focus on the intrinsic qualities of particular types of stone and their source. The assemblage of different stone types that accumulated at Stonehenge, Wiltshire, over a period of more than a thousand years is used as a case study.

Well completion report - dissolution zone water wells (PD-8, PD-11, PD-12, PD-13), Palo Duro Basin, Texas: unanalyzed data

International Nuclear Information System (INIS)

1984-04-01

This report describes the drilling and testing of four dissolution zone water wells: Sawyer No. 2, Mansfield No. 2, Detten No. 2, and Harman No. 1; each in a different location in Texas. Drilling and testing were performed by Stone and Webster Engineering Corporation as a part of a nationwide program to identify potential locations for a nuclear waste repository. Stone and Webster worked under a contract with the US Department of Energy's Program Manager: Battelle Project Management Division, Office of Nuclear Waste Isolation. This report describes the drilling and testing activities actually performed (compared to the Field Test Plan), describes the problems encountered, and provides recommendations for future work. Data gathered during drilling and testing of the well are included as appendices to this report. These data are preliminary. They have been neither analyzed nor evaluated. 5 figures

Use of Local Stone: Successes, Failures and Considerations

Science.gov (United States)

Gerns, Edward; Will, Rachel

2015-04-01

Stone has been used in construction for thousands of years. Until relatively recently, local stone was used almost exclusively due to limited transportation options and to reduce costs. . Historically, the stone was often taken from nearby fields, known as fieldstone, without any specific quarrying operations and used to create unique assemblages of vernacular buildings. Stone, perhaps more than any other natural building material, has numerous varieties and characteristics within the broader classifications of stone: sedimentary, igneous and metamorphic. In exterior applications, stone historically has been used for foundations, localized cladding elements and in some instances entire building facades. Many of these local stones are appropriate for foundations, but not necessarily for cladding systems, particularly once the stone was quarried and modified rather than used in its natural form. These issues tended to be less significant in historic buildings when wall systems were much thicker and had more redundancies in the cladding systems Since around 1880, the use of these thinner applications of quarried stones as more traditional cladding systems (rather than cladding and structure) has resulted in challenges including unanticipated weathering characteristics, residual stresses and detrimental inclusions. These conditions can result in expensive and extensive repairs and maintenance. Often the options to address these characteristics are limited or potentially drastic depending on the scale of installation. It is important to understand the cause of the issues, understand if these issues are significant and finally how to address them appropriately. Where and how these unique local stones are installed as well as climate and weathering patterns certainly contribute to the potential unanticipated conditions. This presentation will be divided into two general parts. The first will address various stones used historically throughout regions within the United

Introduction. Leave no stone unturned: Perspectives on ground stone artefact research

OpenAIRE

Danny Rosenberg; Yorke Rowan; Tatjana Gluhak

2016-01-01

Ground stone tools served in many physical and social contexts through millennia, reflecting a wide variety of functions. Although ground stone tool studies were neglected for much of early archaeology, the last few decades witnessed a notable international uptick in the way archaeologists confront this multifaceted topic. Today, with the advance of archaeology as a discipline, research into ground stone artefacts is moving into a new phase that integrates high resolution documentation with n...

Ultrasonic propulsion of kidney stones.

Science.gov (United States)

May, Philip C; Bailey, Michael R; Harper, Jonathan D

2016-05-01

Ultrasonic propulsion is a novel technique that uses short bursts of focused ultrasonic pulses to reposition stones transcutaneously within the renal collecting system and ureter. The purpose of this review is to discuss the initial testing of effectiveness and safety, directions for refinement of technique and technology, and opinions on clinical application. Preclinical studies with a range of probes, interfaces, and outputs have demonstrated feasibility and consistent safety of ultrasonic propulsion with room for increased outputs and refinement toward specific applications. Ultrasonic propulsion was used painlessly and without adverse events to reposition stones in 14 of 15 human study participants without restrictions on patient size, stone size, or stone location. The initial feasibility study showed applicability in a range of clinically relevant situations, including facilitating passage of residual fragments following ureteroscopy or shock wave lithotripsy, moving a large stone at the ureteropelvic junction with relief of pain, and differentiating large stones from a collection of small fragments. Ultrasonic propulsion shows promise as an office-based system for transcutaneously repositioning kidney stones. Potential applications include facilitating expulsion of residual fragments following ureteroscopy or shock wave lithotripsy, repositioning stones prior to treatment, and repositioning obstructing ureteropelvic junction stones into the kidney to alleviate acute renal colic.

Secondary Waste Cast Stone Waste Form Qualification Testing Plan

Energy Technology Data Exchange (ETDEWEB)

Westsik, Joseph H.; Serne, R. Jeffrey

2012-09-26

The Hanford Tank Waste Treatment and Immobilization Plant (WTP) is being constructed to treat the 56 million gallons of radioactive waste stored in 177 underground tanks at the Hanford Site. The WTP includes a pretreatment facility to separate the wastes into high-level waste (HLW) and low-activity waste (LAW) fractions for vitrification and disposal. The LAW will be converted to glass for final disposal at the Integrated Disposal Facility (IDF). Cast Stone – a cementitious waste form, has been selected for solidification of this secondary waste stream after treatment in the ETF. The secondary-waste Cast Stone waste form must be acceptable for disposal in the IDF. This secondary waste Cast Stone waste form qualification testing plan outlines the testing of the waste form and immobilization process to demonstrate that the Cast Stone waste form can comply with the disposal requirements. Specifications for the secondary-waste Cast Stone waste form have not been established. For this testing plan, Cast Stone specifications are derived from specifications for the immobilized LAW glass in the WTP contract, the waste acceptance criteria for the IDF, and the waste acceptance criteria in the IDF Permit issued by the State of Washington. This testing plan outlines the testing needed to demonstrate that the waste form can comply with these waste form specifications and acceptance criteria. The testing program must also demonstrate that the immobilization process can be controlled to consistently provide an acceptable waste form product. This testing plan also outlines the testing needed to provide the technical basis for understanding the long-term performance of the waste form in the disposal environment. These waste form performance data are needed to support performance assessment analyses of the long-term environmental impact of the secondary-waste Cast Stone waste form in the IDF

Seismic-design questions typify nuclear obstacles

International Nuclear Information System (INIS)

Strauss, S.D.

1979-01-01

The trade-off between safe design of nuclear power plants and cost is considered. As an example, seismic protection problems at the Beaver Valley station of Duquesne Light Co. and their resolution by Stone and Webster Engineering are discussed

Sterilization of single-use helical stone baskets: an experimental study

Directory of Open Access Journals (Sweden)

Cely Barreto da Silva

2011-03-01

Full Text Available Objectives: To experimentally evaluate the efficacy of a standard sterilization protocol employed during reuse of disposable helical stone baskets. Methods: Study performed on 20 helical stone baskets: 10 were used in the initial validation process, contaminated with Escherichia coli ATCC 25922 and imprinted on Müeller-Hinton media; 10 catheters were contaminated with Geobacillus stearothermophilus ATCC 7953, processed, inoculated in TSB and incubated in a water bath at a temperature of 55ºC. Bacterial growth was evaluated after 1, 3, 5 and 7 days. After sterilization, stone baskets were also opened and closed 40 times to check for functional problems. All plastic and basket parts were carefully checked for damages. Results: After the 72-hour incubation period, there was growth of E. coli ATCC 25922 in 100% of imprints. After the sterilization process and up to 7 days incubation period on a blood agar plate, there was no growth of G. stearothermophilus ATCC 7953 or any other bacteria. There were no functional problems or damage to baskets after the sterilization process. Conclusion: The ethylene oxide system is efficacious and safe for sterilization of disposable helical stone baskets. However, further clinical studies are required and should provide more safety information.

Influence of Pelvicaliceal Anatomy on Stone Clearance After Flexible Ureteroscopy and Holmium Laser Lithotripsy for Large Renal Stones.

Science.gov (United States)

Inoue, Takaaki; Murota, Takashi; Okada, Shinsuke; Hamamoto, Shuzo; Muguruma, Kouei; Kinoshita, Hidefumi; Matsuda, Tadashi

2015-09-01

This study was performed to evaluate the impact of pelvicaliceal anatomy on stone clearance in patients with remnant fragments in the lower pole after flexible ureteroscopy and holmium laser lithotripsy (fURSL) for renal stones >15 mm. This retrospective study included 67 patients with radiopaque residual fragments (>2 mm) in the lower pole after fURSL for large renal stones (>15 mm). The preoperative infundibular length (IL), infundibular width (IW), infundibulopelvic angle (IPA), and caliceal pelvic height (CPH) were measured using intravenous urography. Multivariate analysis was performed to determine whether any of these measurements affected stone clearance. Of the 67 patients, 55 (82.1%) were stone free (SF) 3 months after fURSL. The anatomic factors significantly favorable for an SF status were a short IL, broad IW, wide IPA, and low CPH. On multivariate analysis, the IPA had a significant influence on an SF status after fURSL (p=0.010). An IPA renal stones according to our multivariate analysis. Additional studies are required to further evaluate the characteristics of the pelvicaliceal anatomy influencing stone clearance.

Natural stone muds as secondary raw materials: towards a new sustainable recovery process

Science.gov (United States)

Zichella, Lorena; Tori, Alice; Bellopede, Rossana; Marini, Paola

2016-04-01

The production of residual sludge is a topical issue, and has become essential to recover and reuse the materials, both for the economics and the environmental aspect. According to environmental EU Directives, in fact ,the stone cutting and processing should characterized by following objectives, targets and actions: the reduction of waste generated, the decreasing of use of critical raw material, the zero landfilling of sludge and decreasing in potential soil contamination, the prevention of transport of dangerous waste, the reduction of energy consumption, the zero impact on air pollution and the cost reduction . There are many industrial sector in which residual sludge have high concentrations of metals and/or elements deemed harmful and therefore hazardous waste. An important goal, for all industrial sectors, is an increase in productivity and a parallel reduction in costs. The research leads to the development of solutions with an always reduced environmental impact. The possibility to decrease the amount of required raw materials and at the same time the reduction in the amount of waste has become the aim for any industrial reality. From literature there are different approaches for the recovery of raw and secondary materials, and are often used for the purpose chemical products that separate the elements constituting the mud but at the same time make additional pollutants. The aim of the study is to find solutions that are environmentally sustainable for both industries and citizens. The present study is focused on three different Piedmont rocks: Luserna, Diorite from Traversella and Diorite from Vico, processed with three different stone machining technologies: cutting with diamond wire in quarry (blocks), in sawmill (slabs) and surface polishing. The steps are: chemical analysis, particle size analysis and mineralogical composition and characterization of the sludge obtained from the various machining operations for the recovery of the metal material by

Study of stone composition changes in melamine-related urinary calculi and its clinical significance.

Science.gov (United States)

Li, Yuan; Chen, YiRong; Zhang, Wei; Huang, XiaoGang; Li, WenHui; Ru, XiaoRui; Meng, Min; Xi, Xinsheng; Huang, Gang; Shi, BaoGuang; Liu, Gang; Li, WeiHua; Xu, Hui

2011-08-01

To investigate the composition changes in melamine-related urinary calculi and their clinical significance. A total of 49 melamine-related urinary calculi were included from 49 children (age 4-82 months, mean 22). The qualitative analysis of stone composition was determined using Fourier transform infrared. The quantitative analysis of the stone computed tomography (CT) attenuation value, stone uric acid level, and stone calcium level were measured using spiral CT, high-performance liquid chromatography, and flame atomic absorption spectrum, respectively. Fourier transform infrared showed that 41 (84%) of the 49 stones contained uric acid and 25 (51%) contained calcium compounds. The data from the qualitative and quantitative analysis were available for 15 stones because of sample consumption in the detection process (Fourier transform infrared, atomic absorption spectrum, and high-performance liquid chromatography). A negative correlation was observed between stone uric acid level and stone calcium level (n = 15, r = -0.629, P = .009). A positive correlation was observed between the stone calcium level and stone CT attenuation value (n = 25, r = 0.855, P = .000). Compared with the ≤1-year-age group and the 1-2-year-age group, the stone calcium level in the >2-year-age group was significantly greater (27.51% ± 12.65% vs 1.60% ± 1.68% or 10.12% ± 8.69%, P = .000 and P = .003, respectively). Compared with the alkalization-alone group, the stone calcium level in the nonalkalization-alone group was significant greater (19.83% ± 7.48% vs 1.25% ± 1.43%, n = 19, P = .000). The stones from children >2 years old were not amenable to medical treatment because they contained greater levels of calcium, which can be demonstrated by the radiologic "positive stone image" or stone CT attenuation value. We believe that surgical invention will be the best choice for such patients if extracorporeal shock wave lithotripsy has failed. Copyright © 2011 Elsevier Inc. All rights

Enhanced Mixed Feedstock Processing Using Ionic Liquids

Energy Technology Data Exchange (ETDEWEB)

Simmons, Blake A [Lawrence Berkeley National Laboratory (LBNL), Berkeley, CA (United States)

2016-10-22

Biomass pretreatment using certain ionic liquids (ILs) is very efficient, generally producing a substrate that is amenable to saccharification with fermentable sugar yields approaching theoretical limits. Although promising, several challenges must be addressed before IL pretreatment technology becomes commercially viable. Once of the most significant challenges is the affordable and scalable recovery and recycle or the IL itself. Pervaporation is a highly selective and scalable membrane separation process for quantitatively recovering volatile solutes or solvents directly from non-volatile solvents that could prove more versatile for IL dehydration than traditional solvent extraction processes, as well as efficient and energetically more advantageous than standard evaporative techniques. In this study we evaluated a commercially available pervaporation system for IL dehydration and recycling as part of an integrated IL pretreatment process using 1-ethyl-3-methylimidazolium acetate ([C2C1Im][OAc]) that has been proven to be very effective as a biomass pretreatment solvent. We demonstrate that >99.9 wt% [C2C1Im][OAc] can be recovered from aqueous solution and recycled at least five times. A preliminary techno-economic analysis validated the promising role of pervaporation in improving overall biorefinery process economics, especially in the case where other IL recovery technologies might lead to significant losses. These findings establish the foundation for further development of pervaporation as an effective method of recovering and recycling ILs using a commercially viable process technology.

Calcium Oxalate Stones Are Frequently Found Attached to Randall's Plaque

International Nuclear Information System (INIS)

Matlaga, Brian R.; Williams, James C. Jr.; Evan, Andrew P.; Lingeman, James E.

2007-01-01

The exact mechanisms of the crystallization processes that occur during the formation of calcium oxalate calculi are controversial. Over six decades ago, Alexander Randall reported on a series of cadaveric renal units in which he observed calcium salt deposits on the tips of the renal papilla. Randall hypothesized that these deposits, eponymously termed Randall's plaque, would be the ideal site for stone formation, and indeed in a number of specimens he noted small stones attached to the papillae. With the recent advent of digital endoscopic imaging and micro computerized tomography (CT) technology, it is now possible to inspect the renal papilla of living, human stone formers and to study the attached stone with greater scrutiny

Ionic conductivity and complexation in liquid dielectrics

International Nuclear Information System (INIS)

Zhakin, Anatolii I

2003-01-01

Electronic and ionic conductivity in nonpolar liquids is reviewed. Theoretical results on ionic complexation (formation of ion pairs and triplets, dipole-dipole chains, ion-dipole clusters) in liquid dielectrics in an intense external electric field are considered, and the relation between the complexation process and ionic conductivity is discussed. Experimental results supporting the possibility of complexation are presented and compared with theoretical calculations. Onsager's theory about the effect of an intense external electric field on ion-pair dissociation is corrected for the finite size of ions. (reviews of topical problems)

A Direct Sulfation Process of a Marine Polysaccharide in Ionic Liquid

Directory of Open Access Journals (Sweden)

Nathalie Chopin

2015-01-01

Full Text Available GY785 is an exopolysaccharide produced by a mesophilic bacterial strain Alteromonas infernus discovered in the deep-sea hydrothermal vents. GY785 highly sulfated derivative (GY785 DRS was previously demonstrated to be a promising molecule driving the efficient mesenchymal stem cell chondrogenesis for cartilage repair. This glycosaminoglycan- (GAG- like compound was modified in a classical solvent (N,N′-dimethylformamide. However, the use of classical solvents limits the polysaccharide solubility and causes the backbone degradation. In the present study, a one-step efficient sulfation process devoid of side effects (e.g., polysaccharide depolymerization and/or degradation was developed to produce GAG-like derivatives. The sulfation of GY785 derivative (GY785 DR was carried out using ionic liquid as a reaction medium. The successful sulfation of this anionic and highly branched heteropolysaccharide performed in ionic liquid would facilitate the production of new molecules of high specificity for biological targets such as tissue engineering or regenerative medicine.

A Novel Decision Aid to Support Informed Decision-Making Process in Patients with a Symptomatic Nonlower Pole Renal Stone <20 mm in Diameter.

Science.gov (United States)

Gökce, Mehmet İlker; Esen, Barış; Sancı, Adem; Akpınar, Cağrı; Süer, Evren; Gülpınar, Ömer

2017-07-01

Stone disease is an important health problem, and patients have different treatment choices. Shared decision making is recommended for deciding the treatment type, but patient education is necessary. Decision aids (DAs) are used for this aim, and herein, we developed a novel DA for patients with symptomatic nonlower pole renal stones group assessment resulted in a total score of 50/54. Patient evaluation of the DA resulted in favorable outcomes, and patients generally recommended its use by other patients. This novel DA for patients with a symptomatic nonlower pole renal stone <20 mm showed promising results and was well accepted by the patients. We believe that this DA will have a positive impact on patients' level of knowledge. Increased level of knowledge will also improve the patients' contribution to the shared decision-making process. A further prospective randomized trial to compare with the standard patient informing process is also planned.

The present state and future of the development of dimension stone mining in Slovak conditions

Directory of Open Access Journals (Sweden)

Viliam Žiaran

2005-03-01

Full Text Available In comparing to both ores and energetical minerals there are occurences of extremly rich non-methallics minerals on the Slovak territory. These minerals represent very large-scale sortiment with a considerable amount of verified reserves. Reserves of magnesite, salt rock, dolomite, limestone, talc, bentonite, clays and another construction minerals present many possibilities of their industrial utilization. A specific case is the mining of dimension stones such as stable ingeneous,sedimentary and metamorphic rocks that are mined in the open-pit blocks. Applicable to the production of both ingeneous stone and gross stone [3].The open-pit mining and dimension stone processing by the both above mentioned stone productions forms are focused mainly to the external and internal building industry. Despite of the fact that the natural reserves of dimension stone are limited at the Slovak territory, being distributed at large numbers of open-pits mines, from the point of view of the next development of the dimension stone industry its technical and economic vitalitycan be expected. The paper deals with both the technological and ecological mining problems of dimension stone and shows the possibilities how to improve both the works productivity and quality of products including the ecological impacts by the dimension stone mining.

Introductory Overview of Stone Heritages in Japan

Science.gov (United States)

Kato, Hirokazu; Oikawa, Teruki; Fujita, Masayo; Yokoyama, Shunji

2013-04-01

As one contribution to 'Global Heritage Stone Resources' (GHSR), some stone heritages in Japan, which are nominated in the interim list, are briefly introduced. The geology of Japanese Islands where are the one of the most active areas in the history of the Earth, is very complicated. Therefore Japanese Islands consist of various kinds of minerals and rocks. Some of them were used to make stone implements and accessories. Japanese people also used to the best possible advantage to built tombstone, gate, pavement ,and the basement and wall of the large building such as temples, shrines, castles and modern buildings. 1. Stone Heritages of Pre-historical age: In the late Pleistocene and the early Holocene, ancient Japanese used obsidian cooled rapidly from rhyolitic magma.to make small implements and accessories. For example, Shirataki, Hokkaido (north island) is the largest place producing obsidian in Japan where Paleolithic people made arrowhead, knives and so on. Another example, Jade yielded in Itoigawa City, Japan Sea coast of central Japan, was made in the metamorphic rock about five hundred million years ago. Itoigawa area is only one place where jade is abundantly produced in Japan. Ancient people had been already collected and processed to ornaments although it is very hard and traded in wide area more than several thousand years ago. 2. Stone Heritages of Historical age: 2.1 Archaeological remains: In the Kofun (old mound) period (250 to 538 AD), stone burial chambers were used for old mounds to preserve against the putrefaction and to protect from the theft. For example, Ishibutai Kofun ("ishi" means "stone" and "butai" means "stage") in Nara old capital city, southwest Japan, is the largest known megalithic structure made of granite in Japan. 2.2 Stone walls of some typical castles Stones used is because of not only the rich reserves of rocks but also restriction of transportation. Osaka (second biggest city) castle, are composed of Cretaceous granite

Neutron radiography for the characterization of porous structure in degraded building stones

International Nuclear Information System (INIS)

Barone, G; Mazzoleni, P; Raneri, S; Crupi, V; Longo, F; Majolino, D; Venuti, V; Teixeira, J

2014-01-01

As it is well known, the porous structure of stones can change due to different degradation processes that modify the characteristics of freshly quarried blocks. Their knowledge is fundamental for predicting the behavior of stones and the efficacy of conservative treatments. In this context, neutron radiography is a useful tool not only to visualize the structure of porous materials, but also to evaluate the degree of degradation and surface modifications resulting from weathering processes. Furthermore, since thermal neutrons suffer a strong attenuation by hydrogen, this technique is effective in order to investigate the amount of absorbed water in building materials. In the present work, we report a neutron radiography investigation of limestones cropping out in the South-Eastern Sicily and widely used as building stones in Baroque monuments of the Noto Valley. The analyzed samples have been submitted to cyclic salt crystallization that simulate degradation processes acting in exposed stones of buildings. The obtained results demonstrate the interest of neutron radiography to better understand deterioration processes in limestones and to acquire information useful for restoration projects

Quality Assessment of Urinary Stone Analysis

DEFF Research Database (Denmark)

Siener, Roswitha; Buchholz, Noor; Daudon, Michel

2016-01-01

After stone removal, accurate analysis of urinary stone composition is the most crucial laboratory diagnostic procedure for the treatment and recurrence prevention in the stone-forming patient. The most common techniques for routine analysis of stones are infrared spectroscopy, X-ray diffraction......, fulfilled the quality requirements. According to the current standard, chemical analysis is considered to be insufficient for stone analysis, whereas infrared spectroscopy or X-ray diffraction is mandatory. However, the poor results of infrared spectroscopy highlight the importance of equipment, reference...... spectra and qualification of the staff for an accurate analysis of stone composition. Regular quality control is essential in carrying out routine stone analysis....

Significance of lower-pole pelvicaliceal anatomy on stone clearance after shockwave lithotripsy in nonobstructive isolated renal pelvic stones.

Science.gov (United States)

Sozen, Sinan; Kupeli, Bora; Acar, Cenk; Gurocak, Serhat; Karaoglan, Ustunol; Bozkirli, Ibrahim

2008-05-01

To investigate the probable effect of lower-pole pelvicaliceal anatomy on stone clearance after shockwave lithotripsy (SWL) in patients with nonobstructive renal pelvic stones. The clinical records of patients with isolated renal pelvic stones who underwent SWL between 1996 and 2005 were reviewed. After excluding patients with obstruction leading to dilatation, major anatomic abnormalities, noncalcium stones, metabolic abnormalities, history of recurrent stone disease, multiple stones, and previous renal surgery, 153 patients were enrolled in the study. Lower pole infundibulopelvic angle (IPA) and infundibular length and width were measured from intravenous urography. Patients were classified into three groups according to stone burden (group 1, renal pelvis, and both in 50 (32.6%), 29 (18.9%), and 8 (5.2%) patients, respectively. There was no statistically significant difference in pelvicaliceal anatomic features except narrower IPA (P=0.02) in group 1 patients with residual stones. The falling of stone fragments to the lower calix in spite of the ureter whether clinically significant or not after SWL of pelvic stones initially seems to be related to stone burden rather than lower caliceal anatomy. However, existence of a more narrow IPA in group 1 patients with residual fragments led us to believe that lower-pole IPA can play a role in stone clearance, especially for smaller stones, probably because of smaller residual fragment size or the more mobile nature of the primary stone.

Kidney Stones in Children and Teens

Science.gov (United States)

... Issues Listen Español Text Size Email Print Share Kidney Stones in Children and Teens Page Content Article ... teen girls having the highest incidence. Types of Kidney Stones There are many different types of kidney ...

Famous Stone Patients and Their Disease

Science.gov (United States)

Moran, Michael E.

2007-04-01

The fact that stone patients have endured much throughout the ages and that prior to our current era, when the ultimate horror, "being cut for the stone" was the only alternative to the repeated episodes of colic, should be recalled from time to time. Urolithiasis has affected humanity throughout the ages and has been indiscriminate to those lives it touched. A full accounting of those who have suffered and recorded their agonies is beyond the scope of this investigation; however, even a partial accounting is valuable for present day physicians who care for those with stone disease. For the present work, the historical accounts of stone disease literature were scrutinized for individual sufferers who could be cross-referenced from other sources as legitimately afflicted by stones. Only those patients that could be documented and were (or are) well known were included, because the internet is now a verdant repository of thousands of "not so well knowns." Reliable historical data was found for a variety of persons from the pre-Christian era to the present, including those remembered as philosophers and scientists, physicians, clergy, leaders and rulers, entertainers, athletes and fictitious/Hollywood-type individuals. Verified accounts of famous stone formers were chosen for this paper, and are presented in chronological order. The list of urolithiasis sufferers presented here is undoubtedly incomplete, but it is not through lack of trying that they are missing. Most often, the suffering do so silently, and that is always allowed.

Endoscopic Stone Measurement During Ureteroscopy.

Science.gov (United States)

Ludwig, Wesley W; Lim, Sunghwan; Stoianovici, Dan; Matlaga, Brian R

2018-01-01

Currently, stone size cannot be accurately measured while performing flexible ureteroscopy (URS). We developed novel software for ureteroscopic, stone size measurement, and then evaluated its performance. A novel application capable of measuring stone fragment size, based on the known distance of the basket tip in the ureteroscope's visual field, was designed and calibrated in a laboratory setting. Complete URS procedures were recorded and 30 stone fragments were extracted and measured using digital calipers. The novel software program was applied to the recorded URS footage to obtain ureteroscope-derived stone size measurements. These ureteroscope-derived measurements were then compared with the actual-measured fragment size. The median longitudinal and transversal errors were 0.14 mm (95% confidence interval [CI] 0.1, 0.18) and 0.09 mm (95% CI 0.02, 0.15), respectively. The overall software accuracy and precision were 0.17 and 0.15 mm, respectively. The longitudinal and transversal measurements obtained by the software and digital calipers were highly correlated (r = 0.97 and 0.93). Neither stone size nor stone type was correlated with error measurements. This novel method and software reliably measured stone fragment size during URS. The software ultimately has the potential to make URS safer and more efficient.

The "Global Heritage Stone Resource": Past, Present and Future

Science.gov (United States)

Cooper, Barry

2013-04-01

The "Global Heritage Stone Resource" designation arose in 2007 as a suggested mechanism to enhance international recognition of famous dimension stones. There were also many aspects of dimension stone study that had no formal recognition in mainstream geology and which could be recognised in a formal geological sense via an internationally acceptable geological standard. Such a standard could also receive recognition by other professionals and the wider community. From the start, it was appreciated that active quarrying would an important aspect of the designation so a designation different to any other standard was needed. Also the project was linked to the long-established Commission C-10 Building Stone and Ornamental Rocks of the International Association of Engineering Geology and the Environment (IAEG C-10). Since 2007, the "Global Heritage Stone Resource" (GHSR) proposal has evolved in both in stature and purpose due to an increasing number of interested international correspondents that were actively sought via conference participation. The "English Stone Forum" in particular was pursuing similar aims and was quick to advise that English dimension stone types were being recognised as having international, national or regional importance. Furthermore the proposed designation was suggested as to having significant value in safeguarding designated stone types whilst also providing a potential mechanism in preventing heritage stone replacement by cheap substitutes. During development it also became apparent that stone types having practical applications such as roofing slates and millstones or even stone types utilised by prehistoric man can also be recognised by the new designation. The heritage importance of architects was also recognised. Most importantly an international network evolved, primarily including geologists, that now seems to be the largest international grouping of dimension stone professionals. This has assisted the project to affiliate with the

78 FR 3911 - Big Stone National Wildlife Refuge, Big Stone and Lac Qui Parle Counties, MN; Final Comprehensive...

Science.gov (United States)

2013-01-17

... DEPARTMENT OF THE INTERIOR Fish and Wildlife Service [FWS-R3-R-2012-N259; FXRS1265030000-134-FF03R06000] Big Stone National Wildlife Refuge, Big Stone and Lac Qui Parle Counties, MN; Final Comprehensive... significant impact (FONSI) for the environmental assessment (EA) for Big Stone National Wildlife Refuge...

Ionic liquids and green chemistry : a lab experiment

NARCIS (Netherlands)

Stark, A.; Ott-Reinhardt, D.; Kralisch, D.; Kreisel, G.; Ondruschka, B.

2010-01-01

Although ionic liquids have been investigated as solvents for many applications and are starting to be used in industrial processes, only a few lab experiments are available to introduce students to these materials. Ionic liquids have been discussed in the context of green chemistry, but few

Visualization and quantification of weathering effects on capillary water uptake of natural building stones by using neutron imaging

International Nuclear Information System (INIS)

Raneri, Simona; Barone, Germana; Mazzoleni, Paolo; Rabot, Eva

2016-01-01

Building stones are frequently subjected to very intense degradation due to salt crystallization, often responsible for strong modifications of their pore network. These effects have a great influence on the mechanical properties and durability of the materials, and on the penetration of water. Therefore, the quantification and visualization of water absorption into the pore network of degraded stones could provide useful information to better understand the weathering process. In this study, neutron radiography has been used (1) to monitor and visualize in two dimensions the capillary water uptake in a Sicilian calcarenite widely used as building and replace stone (namely Sabucina stone) and (2) to quantify the water content distribution, as a function of time and weathering degree. Additionally, traditional experiments based on gravimetric methods have been performed, following the standard recommendations. Results demonstrated a change in the physical properties of Sabucina stones with the intensification of the degradation process, with severe effects on the capillary imbibition dynamics. The water penetration depth at the end of the experiment was substantially higher in the fresh than in the weathered stones. The water absorption kinetics was faster in the weathered samples, and the amount of water absorbed increased with the number of weathering cycles. Good agreement between classical and neutron imaging data has also been evidenced. However, neutron radiography has allowed retrieving additional spatial information on the water absorption process, and to better understand how salt weathering affects the petrophysical properties of the studied stone and how it influences then the stone response against water. (orig.)

Visualization and quantification of weathering effects on capillary water uptake of natural building stones by using neutron imaging

Energy Technology Data Exchange (ETDEWEB)

Raneri, Simona; Barone, Germana; Mazzoleni, Paolo [University of Catania, Department of Biological, Geological and Environment Sciences, Catania (Italy); Rabot, Eva [Laboratoire Leon Brillouin (CNRS/CEA), Gif-Sur-Yvette (France)

2016-11-15

Building stones are frequently subjected to very intense degradation due to salt crystallization, often responsible for strong modifications of their pore network. These effects have a great influence on the mechanical properties and durability of the materials, and on the penetration of water. Therefore, the quantification and visualization of water absorption into the pore network of degraded stones could provide useful information to better understand the weathering process. In this study, neutron radiography has been used (1) to monitor and visualize in two dimensions the capillary water uptake in a Sicilian calcarenite widely used as building and replace stone (namely Sabucina stone) and (2) to quantify the water content distribution, as a function of time and weathering degree. Additionally, traditional experiments based on gravimetric methods have been performed, following the standard recommendations. Results demonstrated a change in the physical properties of Sabucina stones with the intensification of the degradation process, with severe effects on the capillary imbibition dynamics. The water penetration depth at the end of the experiment was substantially higher in the fresh than in the weathered stones. The water absorption kinetics was faster in the weathered samples, and the amount of water absorbed increased with the number of weathering cycles. Good agreement between classical and neutron imaging data has also been evidenced. However, neutron radiography has allowed retrieving additional spatial information on the water absorption process, and to better understand how salt weathering affects the petrophysical properties of the studied stone and how it influences then the stone response against water. (orig.)

Artificial stone dust-induced functional and inflammatory abnormalities in exposed workers monitored quantitatively by biometrics.

Science.gov (United States)

Ophir, Noa; Shai, Amir Bar; Alkalay, Yifat; Israeli, Shani; Korenstein, Rafi; Kramer, Mordechai R; Fireman, Elizabeth

2016-01-01

The manufacture of kitchen and bath countertops in Israel is based mainly on artificial stone that contains 93% silica as natural quartz, and ∼3500 workers are involved in cutting and processing it. Artificial stone produces high concentrations of silica dust. Exposure to crystalline silica may cause silicosis, an irreversible lung disease. Our aim was to screen exposed workers by quantitative biometric monitoring of functional and inflammatory parameters. 68 exposed artificial stone workers were compared to 48 nonexposed individuals (controls). Exposed workers filled in questionnaires, and all participants underwent pulmonary function tests and induced sputum analyses. Silica was quantitated by a Niton XL3 X-ray fluorescence spectrometer. Pulmonary function test results of exposed workers were significantly lower and induced sputa showed significantly higher neutrophilic inflammation compared to controls; both processes were slowed down by the use of protective measures in the workplace. Particle size distribution in induced sputum samples of exposed workers was similar to that of artificial stone dust, which contained aluminium, zirconium and titanium in addition to silica. In conclusion, the quantitation of biometric parameters is useful for monitoring workers exposed to artificial stone in order to avoid deterioration over time.

Retroperitoneoscopy for treatment of renal and ureteral stones

Directory of Open Access Journals (Sweden)

Rodrigo S. Soares

2005-04-01

Full Text Available OBJECTIVE: To assess the efficacy of retroperitoneoscopy for treating stones in the renal pelvis and proximal ureter. MATERIALS AND METHODS: In the period from August 2003 to August 2004, 35 retroperitoneoscopies for treatment of urinary stones were performed on 34 patients. Fifteen patients (42% had stones in the renal pelvis, and in 2 cases, there were associated stones in the upper caliceal group. Twenty patients (58% had ureteral stones, all of them located above the iliac vessel. Twenty-five patients (71% had previously undergone at least one session of extracorporeal lithotripsy and 8 patients (26% also underwent ureteroscopy to attempt to remove the stone. Eight patients underwent retroperitoneoscopy as a primary procedure. Stone size ranged from 0.5 to 6 cm with a mean of 2.1 cm. RESULTS: Retroperitoneoscopy was performed by lumbar approach with initial access conducted by open technique and creation of space by digital dissection. We used a 10-mm Hasson trocar for the optics, and 2 or 3 additional working ports placed under visualization. Following identification, the urinary tract was opened with a laparoscopic scalpel and the stone was removed intact. The urinary tract was closed with absorbable 4-0 suture and a Penrose drain was left in the retroperitoneum. In 17 patients (49%, a double-J stent was maintained postoperatively. Surgical time ranged from 60 to 260 minutes with a mean of 140 minutes. The mean hospital stay was 3 days (1-10 days. The mean length of retroperitoneal urinary drainage was 3 days (1-10 days. There were minor complications in 6 (17.6% patients and 1 case of conversion due to technical difficulty. Thirty-three patients (94% became stone free. CONCLUSION: Retroperitoneoscopy is an effective, low-morbidity alternative for treatment of urinary stones.

Retroperitoneoscopy for treatment of renal and ureteral stones.

Science.gov (United States)

Soares, Rodrigo S; Romanelli, Pedro; Sandoval, Marcos A; Salim, Marcelo M; Tavora, Jose E; Abelha, David L

2005-01-01

To assess the efficacy of retroperitoneoscopy for treating stones in the renal pelvis and proximal ureter. In the period from August 2003 to August 2004, 35 retroperitoneoscopies for treatment of urinary stones were performed on 34 patients. Fifteen patients (42%) had stones in the renal pelvis, and in 2 cases, there were associated stones in the upper caliceal group. Twenty patients (58%) had ureteral stones, all of them located above the iliac vessel. Twenty-five patients (71%) had previously undergone at least one session of extracorporeal lithotripsy and 8 patients (26%) also underwent ureteroscopy to attempt to remove the stone. Eight patients underwent retroperitoneoscopy as a primary procedure. Stone size ranged from 0.5 to 6 cm with a mean of 2.1 cm. Retroperitoneoscopy was performed by lumbar approach with initial access conducted by open technique and creation of space by digital dissection. We used a 10-mm Hasson trocar for the optics, and 2 or 3 additional working ports placed under visualization. Following identification, the urinary tract was opened with a laparoscopic scalpel and the stone was removed intact. The urinary tract was closed with absorbable 4-0 suture and a Penrose drain was left in the retroperitoneum. In 17 patients (49%), a double-J stent was maintained postoperatively. Surgical time ranged from 60 to 260 minutes with a mean of 140 minutes. The mean hospital stay was 3 days (1-10 days). The mean length of retroperitoneal urinary drainage was 3 days (1-10 days). There were minor complications in 6 (17.6%) patients and 1 case of conversion due to technical difficulty. Thirty-three patients (94%) became stone free. Retroperitoneoscopy is an effective, low-morbidity alternative for treatment of urinary stones.

Automated visual inspection for polished stone manufacture

Science.gov (United States)

Smith, Melvyn L.; Smith, Lyndon N.

2003-05-01

Increased globalisation of the ornamental stone market has lead to increased competition and more rigorous product quality requirements. As such, there are strong motivators to introduce new, more effective, inspection technologies that will help enable stone processors to reduce costs, improve quality and improve productivity. Natural stone surfaces may contain a mixture of complex two-dimensional (2D) patterns and three-dimensional (3D) features. The challenge in terms of automated inspection is to develop systems able to reliably identify 3D topographic defects, either naturally occurring or resulting from polishing, in the presence of concomitant complex 2D stochastic colour patterns. The resulting real-time analysis of the defects may be used in adaptive process control, in order to avoid the wasteful production of defective product. An innovative approach, using structured light and based upon an adaptation of the photometric stereo method, has been pioneered and developed at UWE to isolate and characterize mixed 2D and 3D surface features. The method is able to undertake tasks considered beyond the capabilities of existing surface inspection techniques. The approach has been successfully applied to real stone samples, and a selection of experimental results is presented.

Application of Ionic Liquids in Hydrometallurgy

Science.gov (United States)

Park, Jesik; Jung, Yeojin; Kusumah, Priyandi; Lee, Jinyoung; Kwon, Kyungjung; Lee, Churl Kyoung

2014-01-01

Ionic liquids, low temperature molten salts, have various advantages manifesting themselves as durable and environmentally friendly solvents. Their application is expanding into various fields including hydrometallurgy due to their unique properties such as non-volatility, inflammability, low toxicity, good ionic conductivity, and wide electrochemical potential window. This paper reviews previous literatures and our recent results adopting ionic liquids in extraction, synthesis and processing of metals with an emphasis on the electrolysis of active/light, rare earth, and platinum group metals. Because the research and development of ionic liquids in this area are still emerging, various, more fundamental approaches are expected to popularize ionic liquids in the metal manufacturing industry. PMID:25177864

COMORBIDITY OF KIDNEY STONES AND PYCHIATRIC DISEASE

OpenAIRE

Bilić, Vedran; Marčinko, Darko

2010-01-01

This paper describes a patient who is suffering from PTSD with elements of hypochondria, panic attacks and episodes of 0depression in comorbidity with kidney stones. Kidney stones provoked egzacerbation of psychiatric symptoms. Kidney stones and frustration about them have taken part of provoking factor, the last drop, which led to regression of otherwise precarious, but compensated patient’s mental functioning which resulted in development of psychiatric symptoms.

Fast Conversion of Ionic Liquids and Poly(Ionic Liquid)s into Porous Nitrogen-Doped Carbons in Air.

Science.gov (United States)

Men, Yongjun; Ambrogi, Martina; Han, Baohang; Yuan, Jiayin

2016-04-08

Ionic liquids and poly(ionic liquid)s have been successfully converted into nitrogen-doped porous carbons with tunable surface area up to 1200 m²/g at high temperatures in air. Compared to conventional carbonization process conducted under inert gas to produce nitrogen-doped carbons, the new production method was completed in a rather shorter time without noble gas protection.

Obesometric factors associated with increased skin-to-stone distances in renal stone patients.

Science.gov (United States)

Allard, Christopher B; Shuster, Anatoly; Pinthus, Jehonathan H; Farrokhyar, Forough; Raees, A; Patlas, Michael; Matsumoto, Edward D; Whelan, J Paul

2012-12-01

Obese patients are at increased risk for renal stones as well as treatment failures due to increased skin-to-stone distances (SSD) and harder stone compositions. We investigated the relationships between obesometric parameters (body mass index [BMI], body fat distribution and obesity-related hormone levels) with SSD and stone hardness. We prospectively enrolled patients undergoing stone interventions at our institution. Computed tomography (CT) scans were analyzed; adipose tissue was identified according to Hounsfield units (HU) and separated into subcutaneous (SAT) and visceral (VAT) components. The pixels were averaged at three levels to calculate fat distribution: %VAT = (VAT)/(VAT + SAT). SSD was measured and HU were used as a surrogate for stone hardness. Obesity-related hormones leptin and adiponectin were measured by ELISA. Seventy-nine patients were prospectively enrolled. Mean BMI and %VAT were 30.02 kg/m2 and 40.13 kg/m2. Mean leptin and adiponectin levels were 17.5 ng/mL and 7.67 mcg/mL indicating high risk for metabolic consequences of obesity. Females had greater proportions of subcutaneous fat than males (%VAT 28.4 versus 46.94, p r = 0.454, p = 0.008). Obese patients with %VAT > 40 versus stone compositions as measured by HU than non-diabetics (982.86 versus 648.86, p = 0.001). Obesometric parameters such as BMI, body fat distribution, and the presence of diabetes mellitus are important considerations in the management of renal stone disease. A large proportion of subcutaneous fat, which can be estimated by physical examination, predicts SSD among obese patients and may aid treatment decisions in patients, particularly those without pre-treatment CT scans. Further studies are needed to refine the role of obesometrics in personalizing treatment decisions.

Comparison of STONE, CROES and Guy's nephrolithometry scoring systems for predicting stone-free status and complication rates after percutaneous nephrolithotomy in obese patients.

Science.gov (United States)

Ozgor, Faruk; Yanaral, Fatih; Savun, Metin; Ozdemir, Harun; Sarilar, Omer; Binbay, Murat

2017-07-29

In this study, we aim to evaluate the accuracy of STONE (stone size, tract length, obstruction, number of involved calyces, and essence/stone density), Clinical Research Office of the Endourological Society (CROES), and Guy's nephrolithometry scoring systems (NSS) in obese patients. The charts of patients who underwent percutaneous nephrolithotomy (PNL) between June 2008 and June 2016 were retrospectively analyzed. Calculations of the STONE, CROES, and Guy's NSS were performed by a resident who was well informed regarding each NSS. Patients were classified under nine scores according to STONE, four grades according to CROES, and four grades according to Guy's NSS. In total, 248 obese patients were enrolled in the study. Stone size was significantly higher in patients without stone-free status (p = 0.001). In patients who were stone-free and those with residual stones, the mean STONE score was 9.71 and 9.23 (p = 0.160), CROES was 172 and 129 (p = 0.001), and Guy's NSS was 1.67 and 2.75 (p = 0.001). Multivariate regression analysis identified the CROES and Guy's NSS were independent factors for PNL success in obese patients (p = 0.01 and p = 0.01, respectively). The CROES and Guy's NSS showed good accuracy with PNL success (AUC = 0.777 and AUC = 0.844, respectively). None of the three NSS systems were statically associated with a complication rate (p = 0.23 for STONE, p = 0.14 for CROES, and p = 0.51 for Guy's NSS). Our study demonstrated that CROES and Guy's NSS were independent predictors of stone-free rate following PNL in obese patients. Our study also revealed that three of the NSSs were not useful for predicting PNL complications in obese patients.

Histology and cell wall biochemistry of stone cells in the physical defence of conifers against insects.

Science.gov (United States)

Whitehill, Justin G A; Henderson, Hannah; Schuetz, Mathias; Skyba, Oleksandr; Yuen, Macaire Man Saint; King, John; Samuels, A Lacey; Mansfield, Shawn D; Bohlmann, Jörg

2016-08-01

Conifers possess an array of physical and chemical defences against stem-boring insects. Stone cells provide a physical defence associated with resistance against bark beetles and weevils. In Sitka spruce (Picea sitchensis), abundance of stone cells in the cortex of apical shoots is positively correlated with resistance to white pine weevil (Pissodes strobi). We identified histological, biochemical and molecular differences in the stone cell phenotype of weevil resistant (R) or susceptible (S) Sitka spruce genotypes. R trees displayed significantly higher quantities of cortical stone cells near the apical shoot node, the primary site for weevil feeding. Lignin, cellulose, xylan and mannan were the most abundant components of stone cell secondary walls, respectively. Lignin composition of stone cells isolated from R trees contained a higher percentage of G-lignin compared with S trees. Transcript profiling revealed higher transcript abundance in the R genotype of coumarate 3-hydroxylase, a key monolignol biosynthetic gene. Developing stone cells in current year apical shoots incorporated fluorescent-tagged monolignol into the secondary cell wall, while mature stone cells of previous year apical shoots did not. Stone cell development is an ephemeral process, and fortification of shoot tips in R trees is an effective strategy against insect feeding. © 2015 John Wiley & Sons Ltd.

Can stone density on plain radiography predict the outcome of extracorporeal shockwave lithotripsy for ureteral stones?

Science.gov (United States)

Lim, Ki Hong; Jung, Jin-Hee; Kwon, Jae Hyun; Lee, Yong Seok; Bae, Jungbum; Cho, Min Chul; Lee, Kwang Soo

2015-01-01

Purpose The objective was to determine whether stone density on plain radiography (kidney-ureter-bladder, KUB) could predict the outcome of extracorporeal shockwave lithotripsy (ESWL) for ureteral stones. Materials and Methods A total of 223 patients treated by ESWL for radio-opaque ureteral stones of 5 to 20 mm were included in this retrospective study. All patients underwent routine blood and urine analyses, plain radiography (KUB), and noncontrast computed tomography (NCCT) before ESWL. Demographic, stone, and radiological characteristics on KUB and NCCT were analyzed. The patients were categorized into two groups: lower-density (LD) group (radiodensity less than or equal to that of the 12th rib, n=163) and higher-density (HD) group (radiodensity greater than that of the 12th rib, n=60). Stone-free status was assessed by KUB every week after ESWL. A successful outcome was defined as stone free within 1 month after ESWL. Results Mean stone size in the LD group was significantly smaller than that in the HD group (7.5±1.4 mm compared with 9.9±2.9 mm, p=0.002). The overall success rates in the LD and HD groups were 82.1% and 60.0%, respectively (p=0.007). The mean duration of stone-free status and average number of SWL sessions required for success in the two groups were 21.7 compared with 39.2 days and 1.8 compared with 2.3, respectively (pESWL since colic and radiodensity of the stone on KUB were independent predictors of successful ESWL. Conclusions Our data suggest that larger stone size, longer time to ESWL, and ureteral stones with a radiodensity greater than that of the 12th rib may be at a relatively higher risk of ESWL failure 1 month after the procedure. PMID:25598937

The Civil Palaces in Gravina street, Alicante: building stones and salt weathering

Directory of Open Access Journals (Sweden)

Louis, M.

2001-06-01

Full Text Available This paper presents a study into the architecture and construction of the 18^th Century Civil Palaces located in Gravina street (Provincial Museum of Fine Arts of Alicante, the building stones used and the mineral related decay processes that these materials have suffered. The original building stones and other stones used in subsequent restorations in these Civil Palaces are bioclastic limestones and/or calcarenites (San Julian Stone and Bateig Stone. Campello stone and other limestones are also present. Granular disintegration and alveolar weathering are the main forms of deterioration developed on the exterior of these Civil Palaces. These stone decay types are related to salt crystallisation, caused by sea spray salts and/or soil capillary waters. Halite is the most common salt found, probably due to the buildings' proximity to the coast. The halite is also present in indoor efflorescences. Gypsum is present in some efflorescences and ettringite on the inner face of the outdoor cladding stone. The cladding has been destroyed and replaced in the last restoration process.

En este trabajo se realiza un estudio de la arquitectura, construcción y materiales utilizados en los Palacios Civiles del siglo XVIII, situados en la calle Gravina (actual sede del Museo Provincial de Bellas Artes de Alicante. Las rocas utilizadas en la construcción original así como las utilizadas en sustituciones posteriores en estos Palacios Civiles son calizas bioclásticas y/o calcarenitas (Piedra de San Julián y Piedra Bateig. También están presentes la Piedra de Campello y otras calizas. La disgregación granular y la erosión alveolar son las formas de alteración más abundantes en el exterior de estos Palacios Civiles. Estos tipos de alteración están relacionados con la cristalización de sales, procedentes del spray marino y/o de las aguas capilares del suelo. El NaCl es la sal más abundante debido a la proximidad de la costa. La

Preliminary analysis of the Late Natufian ground stone from Shubayqa 1, Jordan

Directory of Open Access Journals (Sweden)

Patrick Nørskov Pedersen

2016-10-01

Full Text Available Shubayqa 1 is a newly identified early and late Natufian site in the harra desert of northeastern Jordan. In addition to buildings, and rich chipped stone, faunal, and botanical assemblages, the site has produced a large collection of ground stone tools. This paper presents the result of a preliminary study of the ground stone artefacts associated with the late Natufian phase. Results indicate that while the assemblage is overall very similar to other Natufian sites in the Mediterranean zone, there are also some notable differences. Although grinding rather than pounding tools appear to be more important at the site, many tools were seemingly involved in both grinding and pounding activities. We hypothesize that this dual function could be explained by the processing of rhizome tubers, which were found in abundance at the site, and which may have represented an important food source for the inhabitants. In addition, we argue that the relationship between ground stone tools and cereal processing has been overemphasized and the processing of other plant food resources, in this case tubers could have been equally significant. While the processing of plant foods was one function, many tools are also associated with pigment stains, suggesting that they were involved in the processing of non-vegetal matter.

Producing the Insulation Block by Stone Processing Waste%利用石材加工废弃物生产保温隔热砌块

Institute of Scientific and Technical Information of China (English)

刘洪学

2015-01-01

本文探讨了利用石材加工废弃物中的边角料制备保温隔热砌块的可行性，提出了砌块的配合比设计方法，优化了砌块的配方参数，并讨论了石屑的细度模数和石屑中中石粉含量对保温隔热砌块综合性能的影响。%In this paper, the feasibility of producing insulation block by stone processing waste scraps was explored, the design of mix pro-portion was offered, the formulation parameters of insulation block was optimized, the fineness modulus of the stone chips and the stone powder content in stone chips on the comprehensive performance of insulation block was analyzed.

Technology programs in support of advanced light water reactor plants: Construction

International Nuclear Information System (INIS)

Eichen, E.P.

1989-10-01

Stone ampersand Webster Engineering Corporation (SWEC) is conducting several independent, yet interrelated, studies of light water reactor plants to improve constructibility and quality, to reduce costs and schedule duration, and to simplify design. This document discusses construction approaches. 77 refs., 5 figs., 6 tabs

Evaluation of ionic liquids as absorbents for ammonia absorption refrigeration cycles using COSMO-based process simulations

Energy Technology Data Exchange (ETDEWEB)

Ruiz, E.; Ferro, V.R., E-mail: victor.ferro@uam.es; Riva, J. de; Moreno, D.; Palomar, J.

2014-06-01

Highlights: • NH{sub 3}–IL absorption cycles are modeled by COSMO-based Aspen simulations. • Proposed a priori computational approach is validated using experimental data. • Cycle performance was analyzed for conventional and task-specific ILs. • IL solvents with high NH{sub 3} absorption capacity improve the cycle performance. • Using IL mixtures is revealed as promising alternative in NH{sub 3} absorption applications. - Abstract: COSMO-based process simulations with Aspen Plus/Aspen HYSYS are used, for the first time, to a priori estimate the thermodynamic performance of ammonia absorption refrigeration cycles using ionic liquids as absorbents. This allows not only broadening the criteria set used to select/design ionic liquids with optimized properties to be used in that role, but also evaluating innovative strategies to improve the cycle’s performances. COSMO-RS method provides the information required for both creating the ionic liquid non-database components and specifying the COSMOSAC property model to perform Aspen Plus calculations. The computational procedure used here gives at the same time reasonable good property predictions of the vapor (refrigerant) and the condensed (ammonia + ionic liquid) phases as well as physically consistent estimations of the cycle’s performance under different conditions. Current results agree with those previously reported in the literature for several ionic liquid-based systems taken for comparison. In addition, task-specific ionic liquids, with improved properties for ammonia absorption, and also binary ionic liquid mixtures are considered in the analysis. It is obtained that ionic liquids showing higher ammonia absorption capacity among the considered absorbents simultaneously provide the best cycle’s performances. The cycle performances vary in relatively wide intervals depending on the ammonia concentration in the (refrigerant + absorbent) solutions. This behavior is strongly modulated by the ammonia

Evaluation of ionic liquids as absorbents for ammonia absorption refrigeration cycles using COSMO-based process simulations

International Nuclear Information System (INIS)

Ruiz, E.; Ferro, V.R.; Riva, J. de; Moreno, D.; Palomar, J.

2014-01-01

Highlights: • NH 3 –IL absorption cycles are modeled by COSMO-based Aspen simulations. • Proposed a priori computational approach is validated using experimental data. • Cycle performance was analyzed for conventional and task-specific ILs. • IL solvents with high NH 3 absorption capacity improve the cycle performance. • Using IL mixtures is revealed as promising alternative in NH 3 absorption applications. - Abstract: COSMO-based process simulations with Aspen Plus/Aspen HYSYS are used, for the first time, to a priori estimate the thermodynamic performance of ammonia absorption refrigeration cycles using ionic liquids as absorbents. This allows not only broadening the criteria set used to select/design ionic liquids with optimized properties to be used in that role, but also evaluating innovative strategies to improve the cycle’s performances. COSMO-RS method provides the information required for both creating the ionic liquid non-database components and specifying the COSMOSAC property model to perform Aspen Plus calculations. The computational procedure used here gives at the same time reasonable good property predictions of the vapor (refrigerant) and the condensed (ammonia + ionic liquid) phases as well as physically consistent estimations of the cycle’s performance under different conditions. Current results agree with those previously reported in the literature for several ionic liquid-based systems taken for comparison. In addition, task-specific ionic liquids, with improved properties for ammonia absorption, and also binary ionic liquid mixtures are considered in the analysis. It is obtained that ionic liquids showing higher ammonia absorption capacity among the considered absorbents simultaneously provide the best cycle’s performances. The cycle performances vary in relatively wide intervals depending on the ammonia concentration in the (refrigerant + absorbent) solutions. This behavior is strongly modulated by the ammonia absorption

Design of the MOX fuel fabrication facility

International Nuclear Information System (INIS)

Johnson, J.V.; Brabazon, E.J.

2001-01-01

A consortium of Duke Engineering and Services, Inc., COGEMA, Inc. and Stone and Webster (DCS) are designing a mixed oxide fuel fabrication facility (MFFF) for the U.S. Department of Energy (DOE) to convert surplus plutonium to mixed oxide (MOX) fuel to be irradiated in commercial nuclear power plants based on the proven European technology of COGEMA and BELGONUCLEAIRE. This paper describes the MFFF processes, and how the proven MOX fuel fabrication technology is being adapted as required to comply with U.S. requirements. (author)

Design of the MOX fuel fabrication facility

Energy Technology Data Exchange (ETDEWEB)

Johnson, J.V. [MFFF Technical Manager, U.S. dept. of Energy, Washington, DC (United States); Brabazon, E.J. [MFFF Engineering Manager, Duke Cogema Stone and Webster, Charlotte, NC (United States)

2001-07-01

A consortium of Duke Engineering and Services, Inc., COGEMA, Inc. and Stone and Webster (DCS) are designing a mixed oxide fuel fabrication facility (MFFF) for the U.S. Department of Energy (DOE) to convert surplus plutonium to mixed oxide (MOX) fuel to be irradiated in commercial nuclear power plants based on the proven European technology of COGEMA and BELGONUCLEAIRE. This paper describes the MFFF processes, and how the proven MOX fuel fabrication technology is being adapted as required to comply with U.S. requirements. (author)

Trends in urological stone disease.

Science.gov (United States)

Turney, Benjamin W; Reynard, John M; Noble, Jeremy G; Keoghane, Stephen R

2012-04-01

To summarize the changes in prevalence and treatment of upper urinary tract stone disease in the UK over the last 10 years. Data from the Hospital Episode Statistics (HES) website (http://www.hesonline.nhs.uk) were extracted, summarized and presented. The number of upper urinary tract stone hospital episodes increased by 63% to 83,050 in the 10-year period. The use of shock wave lithotripsy (SWL) for treating all upper tract stones increased from 14,491 cases in 2000-2001 to 22,402 cases in 2010 (a 55% increase) with a 69% increase in lithotripsy for renal stones. There was a 127% increase in the number of ureteroscopic stone treatments from 6,283 to 14,242 cases over the 10-year period with a 49% increase from 2007/2008 to 2009/2010. There was a decline in open surgery for upper tract stones from 278 cases in 2000/2001 to 47 cases in 2009/2010 (an 83% reduction). Treatment for stone disease has increased substantially in comparison with other urological activity. In 2009/2010, SWL was performed almost as frequently as transurethral resection of the prostate or transurethral resection of bladder tumour, ureteroscopy for stones was performed more frequently than nephrectomy, radical prostatectomy and cystectomy combined, and percutaneous nephrolithotomy was performed more frequently than cystectomy. The present study highlights the increase in prevalence and treatment of stone disease in the UK over the last 10 years. If this trend continues it has important implications for workforce planning, training, service delivery and research in the field of urolithiasis. © 2011 THE AUTHORS. BJU INTERNATIONAL © 2011 BJU INTERNATIONAL.

Ionic Liquids and Green Chemistry: A Lab Experiment

Science.gov (United States)

Stark, Annegret; Ott, Denise; Kralisch, Dana; Kreisel, Guenter; Ondruschka, Bernd

2010-01-01

Although ionic liquids have been investigated as solvents for many applications and are starting to be used in industrial processes, only a few lab experiments are available to introduce students to these materials. Ionic liquids have been discussed in the context of green chemistry, but few investigations have actually assessed the degree of…

Measurement of natural radioactivity in commercial granites and glazing stones from Aswan area, Egypt

International Nuclear Information System (INIS)

Ahmad, F.; Shousha, H.A.

2005-01-01

Ornamental stones are considered as an important source of the mineral wealth in Egypt. These rocks have characteristics that enable them to be used in decoration as being hard, able to be polished and have low water absorption. A knowledge of radioactivity present in these natural rock samples helps to assess the possible radiological hazards to human health and hence take safety precautions if necessary. For the first time, the natural radioactivity of glazing stones used in granite possessing was measured. The concentration of natural radionuclides U-238, Th-232 and K-40 for eighteen ore and three processed granite samples from Aswan area have been determined using a shielded high purity germanium detector coupled to a computerized multichannel analyzer. Also, the gamma activities of 13 glazing stones, which are used in processing of granite, were measured. The average values of the measured activities for granite were 66.15 ± 4.48, 86.12 ± 5.43 and 1902.03 ± 50.64 Bq/kg and for glazing stones were 44.05 ± 3.54, 51.58 ± 4.44 and 87.55 ± 5.46 Bq/kg for U-238, Th-232 and K-40, respectively. The main absorbed dose rates were 167.04 ± 7.52 and 56.72 ± 7.00 n Gy/h at one meter above the ground level for granite and glazing stones, respectively. The average estimated radium equivalent was 335.75 ± 16.48 and 124.55 ± 11.36 Bq/kg for granite and glazing stones, respectively. This value is comparable with the reported values for many countries (370 Bq/kg). The external hazard index varied from 0.5 ± 0.02 to 1.79 ± 0.09 mGy/y for granite and from 0.042 ± 0.011 to 0.852 ± 0.080 mGy/y for glazing stones. Cs-137 concentration ranged from 0.15 ± 0.07 to 3.31 ± 0.29 Bq/kg for granite and from 0.29 ± 0.02 to 1.49 ± 0.010 Bq/kg for glazing stones. For glazing stones, the measured samples are acceptable for use and safe to the workers in granite processing. The radon exhalation rate for granite samples was calculated using nuclear track detector (CR-39). It was

Application of Ionic Liquids in Hydrometallurgy

Directory of Open Access Journals (Sweden)

Jesik Park

2014-08-01

Full Text Available Ionic liquids, low temperature molten salts, have various advantages manifesting themselves as durable and environmentally friendly solvents. Their application is expanding into various fields including hydrometallurgy due to their unique properties such as non-volatility, inflammability, low toxicity, good ionic conductivity, and wide electrochemical potential window. This paper reviews previous literatures and our recent results adopting ionic liquids in extraction, synthesis and processing of metals with an emphasis on the electrolysis of active/light, rare earth, and platinum group metals. Because the research and development of ionic liquids in this area are still emerging, various, more fundamental approaches are expected to popularize ionic liquids in the metal manufacturing industry.

Regional differences in constituents of gall stones.

Science.gov (United States)

Ashok, M; Nageshwar Reddy, D; Jayanthi, V; Kalkura, S N; Vijayan, V; Gokulakrishnan, S; Nair, K G M

2005-01-01

The pathogenesis of pigment and mixed gall stone formation remains elusive. The elemental constituents of gall stones from southern states of Tamil Nadu, Kerala and Karnataka have been characterized. Our aim was to determine the elemental concentration of representative samples of pigment, mixed and cholesterol gall stones from Andhra Pradesh using proton-induced X-ray emission (PIXE) using a 3 MV horizontal pelletron accelerator. Pigment gall stones had significantly high concentrations of copper, iron and lead; chromium was absent. Except for iron all these elements were significantly low in cholesterol gall stones and intermediate levels were seen in mixed gall stones. Highest concentrations of chromium was seen in cholesterol and titanium in mixed gall stones respectively; latter similar to other southern states. Arsenic was distinctly absent in cholesterol and mixed gall stones. The study has identified differences in elemental components of the gall stones from Andhra Pradesh.

The economics of stone disease.

Science.gov (United States)

Canvasser, Noah E; Alken, Peter; Lipkin, Michael; Nakada, Stephen Y; Sodha, Hiren S; Tepeler, Abdulkadir; Lotan, Yair

2017-09-01

The rising prevalence of kidney stone disease is associated with significant costs to healthcare systems worldwide. This is in part due to direct procedural and medical management costs, as well as indirect costs to health systems, patients, and families. A number of manuscripts evaulating the economics of stone disease have been published since the 2008s International Consultation on Stone Disease. These highlight costs associated with stone disease, including acute management, surgical management, and medical management. This work hopes to highlight optimization in care by reducing inefficient treatments and maximizing cost-efficient preventative strategies.

Broken Stone Marker Construction%碎石桩施工

Institute of Scientific and Technical Information of China (English)

高瑞娥

2009-01-01

随着我国高速公路建设的加快,在高速公路的路基设计和施工中引入并使用碎石桩处理软土地基. 文章就结合碎石桩处理软土地基,浅谈碎石桩的施工过程和检测方法.%This paper unifies the broken stone marker processing soft soil ground, discusses the broken stone marker shallowly the construction pro-cess and the examination method.

Statement of philosophy

International Nuclear Information System (INIS)

Flynn, T.A. Jr.

1978-01-01

A 15-point outline is given to demonstrate that Barnwell, SC, could be ready for spent fuel storage in 2-1/2 to 3 years after DOE approval of such a site. A storage facility of a design by Stone and Webster is briefly outlined

The possibility of use of Kremicj granitoid (Serbia) as an architectural stone

International Nuclear Information System (INIS)

Kureshevicj, Lidja

2010-01-01

The stone from the granitoid pluton of Kremić in southern Serbia has been examined in order to evaluate the possibility of its use as an architectural stone. Both field observations and laboratory testing of specimens have been performed. Although the specimens were collected from the field surface level, their physicomechanical lab test results have shown that the rock mass itself fulfils all the requirements for use as an architectural stone set by the State through Serbian standards. Also, the stone quality is higher in deeper ground levels, where the weathering agents have less intense effects. This stone does not have high ornamental properties, but it has a finegrained texture and low mica content which has a positive effect on its technical characteristics and susceptibility to processing. (Author)

Ionomer design for augmented charge transport in novel ionic polymer transducers

International Nuclear Information System (INIS)

Duncan, Andrew J; Akle, Barbar J; Long, Timothy E; Leo, Donald J

2009-01-01

Ionic polymer transducers are devices that display electromechanical transduction and are projected to have extensive applications as actuators and sensors. This study employs novel, highly branched sulfonated polysulfones (sBPS) as part of an investigation into the contribution of polymer topology to electromechanical transduction. Specifically, the ionomers are combined with an ionic liquid to determine the optimal ratio and method for maximizing ionic conductivity, where charge transport is essential to device performance. Two uptake methods are assessed for introduction of ionic liquid into the central ionomeric membrane. The effects of casting membranes in the presence of ionic liquid and swelling preformed membranes in ionic liquid on film stability and ionic conductivity are examined. Membranes cast from a solution of the ionomer and ionic liquid allow for direct targeting of the component ratio and a single-step process for membrane formation. Swelling conditions for preformed neat membranes combine time, temperature, and the presence of organic co-diluents to achieve the maximum stable uptake of ionic liquid. Comparison of optimal conditions for the various methods reveals that swelling with co-diluents achieves ionic conductivity of the imbibed membrane per uptake higher than the levels achieved with the casting process for highly sulfonated sBPS. However, for less sulfonated sBPS the casting process successfully produced membranes with ionic conductivities unreachable with the co-diluent process. Both methods will enable the production of high performance ionic polymer transducers constructed from novel sBPS ionomers and ionic liquids

Ionic liquids as electrolytes

International Nuclear Information System (INIS)

Galinski, Maciej; Lewandowski, Andrzej; Stepniak, Izabela

2006-01-01

Salts having a low melting point are liquid at room temperature, or even below, and form a new class of liquids usually called room temperature ionic liquids (RTIL). Information about RTILs can be found in the literature with such key words as: room temperature molten salt, low-temperature molten salt, ambient-temperature molten salt, liquid organic salt or simply ionic liquid. Their physicochemical properties are the same as high temperature ionic liquids, but the practical aspects of their maintenance or handling are different enough to merit a distinction. The class of ionic liquids, based on tetraalkylammonium cation and chloroaluminate anion, has been extensively studied since late 1970s of the XX century, following the works of Osteryoung. Systematic research on the application of chloroaluminate ionic liquids as solvents was performed in 1980s. However, ionic liquids based on aluminium halides are moisture sensitive. During the last decade an increasing number of new ionic liquids have been prepared and used as solvents. The general aim of this paper was to review the physical and chemical properties of RTILs from the point of view of their possible application as electrolytes in electrochemical processes and devices. The following points are discussed: melting and freezing, conductivity, viscosity, temperature dependence of conductivity, transport and transference numbers, electrochemical stability, possible application in aluminium electroplating, lithium batteries and in electrochemical capacitors

Manufacturing process and electrode properties of palladium-electroded ionic polymer–metal composite

International Nuclear Information System (INIS)

Chang, Longfei; Chen, Hualing; Zhu, Zicai; Li, Bo

2012-01-01

This paper primarily focuses on the manufacturing process of palladium-electroded ionic polymer–metal composite (IPMC). First, according to the special properties of Pd, many experiments were done to determine several specific procedures, including the addition of a reducing agent and the time consumed. Subsequently, the effects of the core manufacturing steps on the electrode morphology were revealed by scanning electron microscopy studies of 22 IPMC samples treated with different combinations of manufacturing steps. Finally, the effects of electrode characteristics on the electromechanical properties, including the sheet resistivity, the elastic modulus and the electro-active performance, of IPMCs were evaluated experimentally and analyzed according to the electrode morphology. (paper)

Comparative Study between Digital Tomosynthesis and Endoscopic Retrograde Cholangio pancreatography for the Evaluation of Common Bile Duct Stones: Focus on Detection and Stone Conspicuity

International Nuclear Information System (INIS)

Huh, Ji Mi; Baek, Seung Yon; Hwang, Yun Mi; Lee, Jeong Kyong; Kim, Yoo Kyung; Yi, Sun Young

2011-01-01

To compare digital tomosynthesis with endoscopic retrograde cholangiopancreatography (ERCP) for the evaluation of common bile duct (CBD) stones as a complementary diagnostic tool. Ninety six consecutive patients clinically suspected of having CBD stones underwent ERCP and digital tomosynthesis over 22 months, from December, 2008 to May, 2010. Fourteen patients were excluded. Therefore 82 patients were included in this study. The images were retrospectively reviewed to compare the results with the final analysis based on the consensus of two abdominal radiologists. An evaluation of the presence of CBD stones was followed by a determination of the margins for the stones, scored with a five-point conspicuity scale. Among the 82 patients, 54 collectively had 89 CBD stones and 28 had no stones. The sensitivity and specificity for the detection of CBD stones were 91.0% and 80.6% for ERCP, 92.1% and 93.5% for digital tomosynthesis, respectively. The average score was 3.29 for ERCP and 3.89 for digital tomosynthesis in 77 similar detected stones. Digital tomosynthesis demonstrated significantly better conspicuity than ERCP (p = 0.001). Digital tomosynthesis is an effective and complementary diagnostic method for the evaluation of CBD stones.

Detection of endolithic spatial distribution in marble stone.

Science.gov (United States)

Casanova Municchia, A; Percario, Z; Caneva, G

2014-10-01

The penetration of endolithic microorganisms, which develop to depths of several millimetres or even centimetres into the stone, and the diffusion of their extracellular substances speeds up the stone deterioration process. The aim of this study was to investigate, using a confocal laser scanning microscopy with a double-staining, a marble rock sample by observing the endolithic spatial distribution and quantifying the volume they occupied within the stone, in order to understand the real impact of these microorganisms on the conservation of stone monuments. Often the only factors taken into account by biodeterioration studies regarding endolithic microorganisms, are spread and depth of penetration. Despite the knowledge of three-dimensional spatial distribution and quantification of volume, it is indispensable to understand the real damage caused by endolithic microorganisms to stone monuments. In this work, we analyze a marble rock sample using a confocal laser scanning microscopy stained with propidium iodide and Concavalin-A conjugate with the fluorophore Alexa Fluor 488, comparing these results with other techniques (SEM microscope, microphotographs of polished cross-sections and thin-section, PAS staining methods), An image analysis approach has also been applied. The use of confocal laser scanning microscopy with double staining shows clear evidence of the presence of endolithic microorganisms (cyanobacteria and fungi) as well as the extracellular polymeric substance matrix in a three-dimensional architecture as part of the rock sample, this technique, therefore, seems very useful when applied to restoration interventions on stone monuments when endolithic growth is suspected. © 2014 The Authors Journal of Microscopy © 2014 Royal Microscopical Society.

The bioreceptivity of building stone

Science.gov (United States)

Mauko Pranjić, Alenka; Mulec, Janez; Muck, Tadeja; Hladnik, Aleš; Mladenovič, Ana

2015-04-01

Bioreceptivity is an intrinsic property of stone, and is defined as the ability of a material to be colonized by living organisms. The fouling and staining of building stone material due to the activity of microorganisms presents a serious problem in modern as well as historical buildings, not only due to the aesthetic impact but also due to the deterioration of the material. Biological colonisation on stone materials is influenced by a number of factors, e.g. the intrinsic properties of the stone (porosity, roughness, permeability, mineral composition), environmental parameters (e.g. solar radiation, temperature, water regime, climate, etc.), and specific microclimatic parameters (e.g. orientation, exposure to shadow, permanent capillary humidity, etc.). In order to assess the bioreceptivity of building stones, use is often made of artificial colonisation experiments compromising the inoculation of stones with a single species or a few isolated strains under laboratory conditions. In the present work the authors present the development of a method for the determination of bioreceptivity, as well as a study of the bioreceptivity of selected natural stone versus the latter's intrinsic properties. Field examples of biodeterioration are also presented. The study was supported by the Slovenian Research Agency (L1-5453).

The study on the factors for detection of renal stone on ultrasound

International Nuclear Information System (INIS)

Sim, Hyun Sun; Jung, Hong Ryang; Lim, Cheong Hwan

2006-01-01

Renal stones are common and typically arise within the collecting system. The renal sinus are contains the collection system, the renal vessels, lymphatcs, fat, and fibrous tissue. Because of the compression of all the large echoes in signal processing, the echo from the renal stone generally cannot be distinguished from large echoes emanating from normal structures of the renal sinus. Use of ultrasonography has been difficult for detecting small renal stone without posterior shadowing and chemical composition of stone. The aim of study was measuring for posterior acoustic shadowing to a stone for various scan parameter and it examines a help in renal stone diagnosis. The stone was place on sponge examined in a water bath with a 3.5 MHz or 7.5 HMz transducer (LOGIQ 400, USA). First, tested a variety of gain. Second, tested a variety of dynamic range. Third, tested a variety of focal zone. Fourth, measuring of the echo level for low and high frequency for depth. 1) Average echo level was 98 for low total gain (10 dB) and was 142 for high total gain (40 dB). Posterior acoustic shadowing of renal stone was clear for low gain. 2) Average echo level was 129 for low dynamic range (42 dB) and was 101 for high dynamic range (72 dB). Posterior acoustic shadowing of renal stone was clear for high dynamic range. 3) When stone is in focal zone of transducer, definite posterior acoustic shadow is identified. 4) Stone was clear appeared for high frequency (7.5 MHz) than low frequency (3.5 MHz) and it is not distorted. The demonstration of an posterior acoustic shadow of renal stone dependents on several technical factors such as gain, dynamic range, focus, and frequency. This various factors are a help in renal stone diagnosis

Novel separation process of gaseous mixture of SO2 and O2 with ionic liquid for hydrogen production in thermochemical sulfur-iodine water splitting cycle

International Nuclear Information System (INIS)

Kim, Chang Soo; Gong, Gyeong Taek; Yoo, Kye Sang; Kim, Honggon; Lee, Byoung Gwon; Ahn, Byoung Sung; Jung, Kwang Deog; Lee, Ki Yong; Song, Kwang Ho

2007-01-01

Sulfur-Iodine cycle is the most promising thermochemical cycle for water splitting to produce hydrogen which can replace the fossil fuels in the future. As a sub-cycle in the thermochemical Sulfur-Iodine water splitting cycle, sulfuric acid (H 2 SO 4 ) decomposes into oxygen (O 2 ) and sulfur dioxide (SO 2 ) which should be separated for the recycle of SO 2 into the sulfuric acid generation reaction (Bunsen Reaction). In this study, absorption and desorption process of SO 2 by ionic liquid which is useful for the recycle of SO 2 into sulfuric acid generation reaction after sulfuric acid decomposition in the thermochemical Sulfur-Iodine cycle is investigated. At first, the operability as an absorbent for the SO 2 absorption and desorption at high temperature without the volatilization of absorbents which is not suitable for the recycle of absorbent-free SO 2 after the absorption process. The temperature range of operability is determined by TGA and DTA analysis. Most of ionic liquids investigated are applicable at high temperature desorption without volatility around 300 deg. C except [BMIm] Cl, and [BMIm] OAc which show the decomposition of ionic liquids. To evaluate the capability of SO 2 absorption, each ionic liquid is located in the absorption tube and gaseous SO 2 is bubbled into the ionic liquid. During the bubbling, the weight of the system is measured and converted into the absorbed SO 2 amount at each temperature controlled by the heater. Saturated amounts of absorbed SO 2 by ionic liquids at 50 deg. C are presented. The effect of anions for the SO 2 absorption capability is shown in the order of Cl, OAc, MeSO 3 , BF 4 , MeSO 4 , PF 6 , and HSO 4 when they are combined with [BMIm] cation. [BMIm]Cl has the largest amount of SO 2 absorbed which can be the most promising absorbent; however, from the point of operability at high temperature which includes desorption process, [BMIm]Cl is vulnerable to high temperature around 250 deg. C based on the TGA

Geomorphology's role in the study of weathering of cultural stone

Science.gov (United States)

Pope, Gregory A.; Meierding, Thomas C.; Paradise, Thomas R.

2002-10-01

Great monumental places—Petra, Giza, Angkor, Stonehenge, Tikal, Macchu Picchu, Rapa Nui, to name a few—are links to our cultural past. They evoke a sense of wonderment for their aesthetic fascination if not for their seeming permanence over both cultural and physical landscapes. However, as with natural landforms, human constructs are subject to weathering and erosion. Indeed, many of our cultural resources suffer from serious deterioration, some natural, some enhanced by human impact. Groups from the United Nations to local civic and tourism assemblies are deeply interested in maintaining and preserving such cultural resources, from simple rock art to great temples. Geomorphologists trained in interacting systems, process and response to thresholds, rates of change over time, and spatial variation of weathering processes and effects are able to offer insight into how deterioration occurs and what can be done to ameliorate the impact. Review of recent literature and case studies presented here demonstrate methodological and theoretical advances that have resulted from the study of cultural stone weathering. Because the stone was carved at a known date to a "baseline" or zero-datum level, some of the simplest methods (e.g., assessing surface weathering features or measuring surface recession in the field) provide useful data on weathering rates and processes. Such data are difficult or impossible to obtain in "natural" settings. Cultural stone weathering studies demonstrate the importance of biotic and saline weathering agents and the significance of weathering factors such as exposure (microclimate) and human impact. More sophisticated methods confirm these observations, but also reveal discrepancies between field and laboratory studies. This brings up two important caveats for conservators and geomorphologists. For the conservator, are laboratory and natural setting studies really analogous and useful for assessing stone damage? For the geomorphologist, does

Catalytic Ionic-Liquid Membranes: The Convergence of Ionic-Liquid Catalysis and Ionic-Liquid Membrane Separation Technologies.

Czech Academy of Sciences Publication Activity Database

Izák, Pavel; Bobbink, F.D.; Hulla, M.; Klepic, M.; Friess, K.; Hovorka, Š.; Dyson, P.J.

2018-01-01

Roč. 83, č. 1 (2018), s. 7-18 ISSN 2192-6506 R&D Projects: GA ČR(CZ) GA17-00089S; GA ČR GA17-05421S Institutional support: RVO:67985858 Keywords : heterogeneous catalysis * ionic liquids * membranes Subject RIV: CI - Industrial Chemistry, Chemical Engineering OBOR OECD: Chemical process engineering Impact factor: 2.797, year: 2016

Effect of Microwave Disinfection on Compressive and Tensile Strengths of Dental Stones

Directory of Open Access Journals (Sweden)

Mahmood Robati Anaraki

2013-03-01

Full Text Available Background and aims. Although microwave irradiation has been used for disinfection of dental stone casts, there are concerns regarding mechanical damage to casts during the process. The aim of this study was to evaluate the effect of microwave irradiation on the compressive strength (CS and diametral tensile strength (DTS of stone casts. Materials and methods. In this in vitro study, 80 cylindrical type III and IV stone models (20 × 40 mm were prepared and divided into 8 groups of 10. The DTS and CS of the specimens were measured by a mechanical testing machine at a crosshead speed of 0.5 cm/min after 7 times of frequent wetting, irradiating at an energy level of 600 W for 3 minutes and cooling. Data were analyzed by Student’s t-test. Results. Microwave irradiation significantly increased DTS of type III and IV to 5.23 ± 0.64 and 8.17 ± 0.94, respectively (P < 0.01. Conclusion. According to the results, microwave disinfection increases DTS of type III and IV stone casts without any effects on their CS.

Association between dental pulp stones and calcifying nanoparticles.

Science.gov (United States)

Zeng, Jinfeng; Yang, Fang; Zhang, Wei; Gong, Qimei; Du, Yu; Ling, Junqi

2011-01-07

The etiology of dental pulp stones, one type of extraskeletal calcification disease, remains elusive to date. Calcifying nanoparticles (CNPs), formerly referred to as nanobacteria, were reported to be one etiological factor in a number of extraskeletal calcification diseases. We hypothesized that CNPs are involved in the calcification of the dental pulp tissue, and therefore investigated the link between CNPs and dental pulp stones. Sixty-five freshly collected dental pulp stones, each from a different patient, were analyzed. Thirteen of the pulp stones were examined for the existence of CNPs in situ by immunohistochemical staining (IHS), indirect immunofluorescence staining (IIFS), and transmission electron microscope (TEM). The remaining 52 pulp stones were used for isolation and cultivation of CNPs; the cultured CNPs were identified and confirmed via their shape and growth characteristics. Among the dental pulp stones examined in situ, 84.6% of the tissue samples staines positive for CNPs antigen by IHS; the corresponding rate by IIFS was 92.3 %. In 88.2% of the cultured samples, CNPs were isolated and cultivated successfully. The CNPs were visible under TEM as 200-400 nm diameter spherical particles surrounded by a compact crust. CNPs could be detected and isolated from a high percentage of dental pulp stones, suggesting that CNPs might play an important role in the calcification of dental pulp.

Developing a stone database for clinical practice.

Science.gov (United States)

Turney, Benjamin W; Noble, Jeremy G; Reynard, John M

2011-09-01

Our objective was to design an intranet-based database to streamline stone patient management and data collection. The system developers used a rapid development approach that removed the need for laborious and unnecessary documentation, instead focusing on producing a rapid prototype that could then be altered iteratively. By using open source development software and website best practice, the development cost was kept very low in comparison with traditional clinical applications. Information about each patient episode can be entered via a user-friendly interface. The bespoke electronic stone database removes the need for handwritten notes, dictation, and typing. From the database, files may be automatically generated for clinic letters, operation notes. and letters to family doctors. These may be printed or e-mailed from the database. Data may be easily exported for audits, coding, and research. Data collection remains central to medical practice, to improve patient safety, to analyze medical and surgical outcomes, and to evaluate emerging treatments. Establishing prospective data collection is crucial to this process. In the current era, we have the opportunity to embrace available technology to facilitate this process. The database template could be modified for use in other clinics. The database that we have designed helps to provide a modern and efficient clinical stone service.

Technology programs in support of advanced light water reactor plants: Construction

International Nuclear Information System (INIS)

Eichen, E.P.

1987-12-01

Stone ampersand Webster Engineering Corporation (SWEC) is conducting several independent, yet interrelated, studies of light water reactor plants to improve constructibility and quality, to reduce costs and schedule durations, and to simplify design. This document discusses successes and problems in construction. 49 refs., 16 figs., 8 tabs

Landsat thematic mapper (TM) soil variability analysis over Webster County, Iowa

Science.gov (United States)

Thompson, D. R.; Henderson, K. E.; Pitts, D. E.

1984-01-01

Thematic mapper simulator (TMS) data acquired June 7, June 23, and July 31, 1982, and Landsat thematic mapper (TM) data acquired August 2, September 3, and October 21, 1982, over Webster County, Iowa, were examined for within-field soil effects on corn and soybean spectral signatures. It was found that patterns displayed on various computer-generated map products were in close agreement with the detailed soil survey of the area. The difference in spectral values appears to be due to a combination of subtle soil properties and crop growth patterns resulting from the different soil properties. Bands 4 (0.76-.90 micron), 5 (1.55-1.75 micron), and 7 (2.08-2.35 micron) were found to be responding to the within-field soil variability even with increasing ground cover. While these results are preliminary, they do indicate that the soil influence on the vegetation is being detected by TM and should provide improved information relating to crop and soil properties.

[Components of urinary crystallites in urine of uric acid stone formers and its relationship with formation of stones].

Science.gov (United States)

Huang, Zhi-jie; Tan, Jin; Ouyang, Jian-ming

2010-09-01

The components, zeta potential, morphology of nanocrystallites in urines of 10 uric acid stone formers as well as their relationship with the formation of uric acid stones were comparatively studied using X-ray diffraction (XRD), Fourier transform infrared (FT-IR) spectroscopy, nanoparticle size analyzer, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The urine pH of uric acid stone formers was relatively low within the range of 4.8 to 5.7. The main constituent of urinary crystallites was uric acid. Their particle size distribution was highly uneven, ranging from several nanometers to several tens of micrometers, and obvious aggregation was observed. The zeta potential of urinary crystallites in ten lithogenic patients was -6.02 mV, which was higher than that in ten normal subjects (-10.1 mV). After drug therapies (potassium citrate was taken), the urine pH value of the uric acid stone formers increased to 6.5 or so, and at this pH value most of the uric acid had changed to urate. Since the solubility of urate increased greatly than uric acid, the risk of the formation of uric acid stone reduced. The results in this paper showed that there was a close relationship among stone components, urinary crystallites composition and urine pH.

Upper urinary tract stone disease in patients with poor performance status: active stone removal or conservative management?

Science.gov (United States)

Yamashita, Shimpei; Kohjimoto, Yasuo; Hirabayashi, Yasuo; Iguchi, Takashi; Iba, Akinori; Higuchi, Masatoshi; Koike, Hiroyuki; Wakamiya, Takahito; Nishizawa, Satoshi; Hara, Isao

2017-11-16

It remains controversial as to whether active stone removal should be performed in patients with poor performance status because of their short life expectancy and perioperative risks. Our objectives were to evaluate treatment outcomes of active stone removal in patients with poor performance status and to compare life prognosis with those managed conservatively. We retrospectively reviewed 74 patients with Eastern Cooperative Oncology Group performance status 3 or 4 treated for upper urinary tract calculi at our four hospitals between January 2009 and March 2016. Patients were classified into either surgical treatment group or conservative management group based on the presence of active stone removal. Stone-free rate and perioperative complications in surgical treatment group were reviewed. In addition, we compared overall survival and stone-specific survival between the two groups. Cox proportional hazards analysis was performed to investigate predictors of overall survival and stone-specific survival. Fifty-two patients (70.3%) underwent active stone removal (surgical treatment group) by extracorporeal shock wave lithotripsy (n = 6), ureteroscopy (n = 39), percutaneous nephrolithotomy (n = 6) or nephrectomy (n = 1). The overall stone-free rate was 78.8% and perioperative complication was observed in nine patients (17.3%). Conservative treatment was undergone by 22 patients (29.7%) (conservative management group). Two-year overall survival rates in surgical treatment and conservative management groups were 88.0% and 38.4%, respectively (p performance status could be performed safely and effectively. Compared to conservative management, surgical stone treatment achieved longer overall survival and stone-specific survival.

Well completion report - Harman No. 1 (PD-8) well, Palo Duro Basin, Texas: unanalyzed data

International Nuclear Information System (INIS)

1984-05-01

This report describes the drilling and testing of Harman No. 1 well, located in north-central Swisher county, about 7 miles north of Tulia, Texas. Drilling and testing were performed by Stone and Webster Engineering Corporation as a part of a nationwide program to identify potential locations for a nuclear waste repository. Stone and Webster worked under a contract with the US Department of Energy's Program Manager: Battelle Project Management Division, Office of Nuclear Waste Isolation. This report describes the drilling and testing activities actually performed (compared to the Field Test Plan), describes the problems encountered, and provides recommendations for future work. Data gathered during drilling and testing of the well are included as appendices to this report. Drilling of the well began July 29, 1982, and was completed September 7, 1982, when a cement plug was set between the depths of 1220 and 1400 feet. These data are preliminary. They have been neither analyzed nor evaluated. 5 figures, 4 tables

Unravelling ground stone life histories: the spatial organization of stone tools and human activities at LN Makriyalos, Greece:

OpenAIRE

Tsoraki, Christina

2007-01-01

Unlike previous studies of ground stone technology in the Greek Neolithic, this paper follows a more contextualised approach by looking at contexts of deposition of ground stone from Late Neolithic Makriyalos, Northern Greece. The patterns attested in the distribution of ground stone objects between domestic and communal areas will be discussed in terms of the spatial and social contexts of tool use, curation and deposition, contributing to wider discussions about the way acts of production, ...

A comparative study of mud-like and coralliform calcium carbonate gallbladder stones.

Science.gov (United States)

Ma, Rui-Hong; Luo, Xiao-Bing; Wang, Xiao-Feng; Qiao, Tie; Huang, Hai-Yi; Zhong, Hai-Qiang

2017-07-01

To gain insight to underlying mechanism of the formation of calcium carbonate (CaCO 3 ) gallbladder stones, we did comparative study of stones with mud appearance and those with coralliform appearance. A total of 93 gallbladder stones with mud appearance and 50 stones with coralliform appearance were analyzed. The appearance, color, texture, and the detection of Clonorchis sinensis eggs by microscopic examination were compared between the two groups. Then, the material compositions of stones were analyzed using Fourier Transform Infrared spectroscopy and the spectrogram characteristics were compared. Moreover, microstructure characteristics of the two kinds of stones were observed and compared with Scanning Electron Microscopy. Mud-like gallbladder stones were mainly earthy yellow or brown with brittle or soft texture, while coralliform stones were mainly black with extremely hard texture, the differences between the two groups was significant (p mud-like gallbladder stones were CaCO 3 stones, and mainly aragonite; while all of the coralliform stones were CaCO 3 stones, and mainly calcite (p mud-like CaCO 3 stones was lower than that in coralliform CaCO 3 stones (p Mud-like CaCO 3 stones mainly happened to patients with cystic duct obstruction. Clonorchis sinensis infection was mainly associated with coralliform (calcite) CaCO 3 stones. Cystic duct obstruction was mainly associated with mud-like (aragonite) CaCO 3 stones. © 2017 Wiley Periodicals, Inc.

Physical and Mechanical Characterization of Artificial Stone with Marble Calcite Waste and Epoxy Resin

OpenAIRE

Silva, Fernanda Souza; Ribeiro, Carlos Eduardo Gomes; Rodriguez, Rubén Jesus Sánchez

2017-01-01

The incorporation of calcite marble waste in epoxy resin for the production of artificial stone can represent a technical-economical method and environmentally viable, reducing the amount of discarded residue in the environment, and adding economic value to marble waste and enabling the generation of jobs. The production of natural stone in Brazil recorded an exorbitant amount of waste generated in marble processing. Only 75% of marble taken from the deposits it becomes the finished product t...

Ionic Liquids: Radiation Chemistry, Solvation Dynamics and Reactivity Patterns

International Nuclear Information System (INIS)

Wishart, J.F.

2008-01-01

Ionic liquids (ILs) are a rapidly expanding family of condensed-phase media with important applications in energy production, nuclear fuel and waste processing, improving the efficiency and safety of industrial chemical processes, and pollution prevention. ILs are generally nonvolatile, noncombustible, highly conductive, recyclable and capable of dissolving a wide variety of materials. They are finding new uses in chemical synthesis, catalysis, separations chemistry, electrochemistry and other areas. Ionic liquids have dramatically different properties compared to conventional molecular solvents, and they provide a new and unusual environment to test our theoretical understanding of charge transfer and other reactions. We are interested in how IL properties influence physical and dynamical processes that determine the stability and lifetimes of reactive intermediates and thereby affect the courses of chemical reactions and product distributions. Successful use of ionic liquids in radiation-filled environments, where their safety advantages could be significant, requires an understanding of ionic liquid radiation chemistry. For example, characterizing the primary steps of IL radiolysis will reveal radiolytic degradation pathways and suggest ways to prevent them or mitigate their effects on the properties of the material. An understanding of ionic liquid radiation chemistry will also facilitate pulse radiolysis studies of general chemical reactivity in ILs, which will aid in the development of applications listed above. Very early in our radiolysis studies it became evident that slow solvation dynamics of the excess electron in ILs (which vary over a wide viscosity range) increases the importance of pre-solvated electron reactivity and consequently alters product distributions. Parallel studies of IL solvation phenomena using coumarin-153 dynamic Stokes shifts and polarization anisotropy decay rates are done to compare with electron solvation studies and to evaluate

Use of the probability of stone formation (PSF score to assess stone forming risk and treatment response in a cohort of Brazilian stone formers

Directory of Open Access Journals (Sweden)

Benjamin Turney

2014-08-01

Full Text Available Introduction The aim was to confirm that PSF (probability of stone formation changed appropriately following medical therapy on recurrent stone formers. Materials and Methods Data were collected on 26 Brazilian stone-formers. A baseline 24-hour urine collection was performed prior to treatment. Details of the medical treatment initiated for stone-disease were recorded. A PSF calculation was performed on the 24 hour urine sample using the 7 urinary parameters required: voided volume, oxalate, calcium, urate, pH, citrate and magnesium. A repeat 24-hour urine sample was performed for PSF calculation after treatment. Comparison was made between the PSF scores before and during treatment. Results At baseline, 20 of the 26 patients (77% had a high PSF score (> 0.5. Of the 26 patients, 17 (65% showed an overall reduction in their PSF profiles with a medical treatment regimen. Eleven patients (42% changed from a high risk (PSF > 0.5 to a low risk (PSF 0.5 during both assessments. Conclusions The PSF score reduced following medical treatment in the majority of patients in this cohort.

Management of ureteric stone in pediatric patients

Directory of Open Access Journals (Sweden)

Eugene Minevich

2010-01-01

Full Text Available The management of ureteral stones in children is becoming more similar to that in adults. A number of factors must be taken into account when selecting one′s choice of therapy for ureteral stone in children such as the size of the stone, its location, its composition, and urinary tract anatomy. Endoscopic lithotripsy in children has gradually become a major technique for the treatment of ureteral stones. The stone-free rate following urteroscopic lithotripsy for ureteral stones has been reported in as high as 98.5-100%. The safety and efficacy of Holmium:YAG laser lithotripsy make it the intracorporeal lithotriptor of choice. Given its minimally invasive features, extracorporeal shock wave lithotripsy (ESWL has become a primary mode of treatment for the pediatric patients with reno-ureteral stones. Stone-free rates have been reported from 59% to 91% although some patients will require more than one treatment session for stone clearance. It appears that the first-line of therapy in the child with distal and mid-ureteral stones should be ureteroscopic lithotripsy. While ESWL is still widely considered the first-line therapy for proximal ureteral calculi, there is an increasing body of evidence that shows that endoscopic or ESWL are equally safe and efficacious in those clinical scenarios. Familiarity with the full spectrum of endourological techniques facilitates a minimally invasive approach to pediatric ureteral stones.

The Potential of Tree Fruit Stone and Seed Wastes in Greece as Sources of Bioactive Ingredients

Directory of Open Access Journals (Sweden)

Stella A. Ordoudi

2018-03-01

Full Text Available The inedible part (stones, husks, kernels, seeds of the tree fruits that are currently processed in various regions of Greece constitutes a huge portion of the fruit processing solid waste that remains underexploited. In this review, the existing scientific background for the composition and content of fruit stone and seed in bioactive ingredients is highlighted for olives, stone fruits and citrus fruits that represent the economically most important tree crop products of the country. The content of bioactive compounds may vary considerably depending on the quality of the raw material and the treatment during processing. However, both the hydrophilic and the lipophilic fractions of the seeds contain significant amounts of the primary and the secondary plant metabolites. Among them, phytosterols and several types of polyphenols, but also squalene, tocopherols and some other terpenoids with a unique structure are of particular importance for the utilization and valorization of stones and seeds. Official and scholar records about the current management practices are also presented to highlight the dynamics of the Greek fruit sector. Prospects for the regionalization of fruit seed wastes, in line with EU-promoted Research and Innovation Strategies (RIS for Smart Specialization are critically discussed.

Management of Asymptomatic Renal Stones in Astronauts

Science.gov (United States)

Reyes, David; Locke, James

2016-01-01

Introduction: Management guidelines were created to screen and manage asymptomatic renal stones in U.S. astronauts. The risks for renal stone formation in astronauts due to bone loss and hypercalcuria are unknown. Astronauts have a stone risk which is about the same as commercial aviation pilots, which is about half that of the general population. However, proper management of this condition is still crucial to mitigate health and mission risks in the spaceflight environment. Methods: An extensive review of the literature and current aeromedical standards for the monitoring and management of renal stones was done. The NASA Flight Medicine Clinic's electronic medical record and Longitudinal Survey of Astronaut Health were also reviewed. Using this work, a screening and management algorithm was created that takes into consideration the unique operational environment of spaceflight. Results: Renal stone screening and management guidelines for astronauts were created based on accepted standards of care, with consideration to the environment of spaceflight. In the proposed algorithm, all astronauts will receive a yearly screening ultrasound for renal calcifications, or mineralized renal material (MRM). Any areas of MRM, 3 millimeters or larger, are considered a positive finding. Three millimeters approaches the detection limit of standard ultrasound, and several studies have shown that any stone that is 3 millimeters or less has an approximately 95 percent chance of spontaneous passage. For mission-assigned astronauts, any positive ultrasound study is followed by low-dose renal computed tomography (CT) scan, and flexible ureteroscopy if CT is positive. Other specific guidelines were also created. Discussion: The term "MRM" is used to account for small areas of calcification that may be outside the renal collecting system, and allows objectivity without otherwise constraining the diagnostic and treatment process for potentially very small calcifications of uncertain

Use of the probability of stone formation (PSF) score to assess stone forming risk and treatment response in a cohort of Brazilian stone formers.

Science.gov (United States)

Turney, Benjamin; Robertson, William; Wiseman, Oliver; Amaro, Carmen Regina P R; Leitão, Victor A; Silva, Isabela Leme da; Amaro, João Luiz

2014-01-01

The aim was to confirm that PSF (probability of stone formation) changed appropriately following medical therapy on recurrent stone formers. Data were collected on 26 Brazilian stone-formers. A baseline 24-hour urine collection was performed prior to treatment. Details of the medical treatment initiated for stone-disease were recorded. A PSF calculation was performed on the 24 hour urine sample using the 7 urinary parameters required: voided volume, oxalate, calcium, urate, pH, citrate and magnesium. A repeat 24-hour urine sample was performed for PSF calculation after treatment. Comparison was made between the PSF scores before and during treatment. At baseline, 20 of the 26 patients (77%) had a high PSF score (> 0.5). Of the 26 patients, 17 (65%) showed an overall reduction in their PSF profiles with a medical treatment regimen. Eleven patients (42%) changed from a high risk (PSF > 0.5) to a low risk (PSF 0.5) during both assessments. The PSF score reduced following medical treatment in the majority of patients in this cohort.

Accurately Diagnosing Uric Acid Stones from Conventional Computerized Tomography Imaging: Development and Preliminary Assessment of a Pixel Mapping Software.

Science.gov (United States)

Ganesan, Vishnu; De, Shubha; Shkumat, Nicholas; Marchini, Giovanni; Monga, Manoj

2018-02-01

Preoperative determination of uric acid stones from computerized tomography imaging would be of tremendous clinical use. We sought to design a software algorithm that could apply data from noncontrast computerized tomography to predict the presence of uric acid stones. Patients with pure uric acid and calcium oxalate stones were identified from our stone registry. Only stones greater than 4 mm which were clearly traceable from initial computerized tomography to final composition were included in analysis. A semiautomated computer algorithm was used to process image data. Average and maximum HU, eccentricity (deviation from a circle) and kurtosis (peakedness vs flatness) were automatically generated. These parameters were examined in several mathematical models to predict the presence of uric acid stones. A total of 100 patients, of whom 52 had calcium oxalate and 48 had uric acid stones, were included in the final analysis. Uric acid stones were significantly larger (12.2 vs 9.0 mm, p = 0.03) but calcium oxalate stones had higher mean attenuation (457 vs 315 HU, p = 0.001) and maximum attenuation (918 vs 553 HU, p uric acid stones. A combination of stone size, attenuation intensity and attenuation pattern from conventional computerized tomography can distinguish uric acid stones from calcium oxalate stones with high sensitivity and specificity. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Luminescence dating of anthropogenic features of the San Luis Valley, Colorado: from stone huts to stone walls

Science.gov (United States)

Mahan, Shannon; Donlan, Rebecca A.; Kardos, Barbara Maat

2015-01-01

The Snake Nest Wall site and the Crestone Stone Huts are in the northern San Luis Valley, Colorado, and provide a unique opportunity to date high-altitude archeological sites of unknown age and origin using optically stimulated luminescence (OSL). We sampled sediment underlying foundation stones of these structures to establish a chronological framework for each site's construction. OSL dating of the quartz grains directly under the Snake Nest Wall suggest that the stones and, therefore, the structure was most recently emplaced between 1855 and 1890 A.D. Dating of the sediment beneath the Crestone Stone Huts suggests the construction time of these huts is between 1860 and 1890 A.D. Analysis of the equivalent dose (DE) dispersion of the OSL samples at Snake Nest Wall and the Crestone Huts shows that the majority of sediments were fully bleached prior to deposition and the low scatter suggests that short-term or shallow alluvial processes were the dominant transport for sediments. In both cases, the OSL ages show that the construction was during very recent historical times, although it is likely that the Snake Nest Wall was rebuilt in the late 19th century. Further study is warranted at the Snake Nest Wall since it shows signs of greater antiquity and a continued presence of human use. The Crestone Huts are shown to be a product of railroad building during the boomtown days of Lucky and Crestone.

New insights into the interface between a single-crystalline metal electrode and an extremely pure ionic liquid: slow interfacial processes and the influence of temperature on interfacial dynamics.

Science.gov (United States)

Drüschler, Marcel; Borisenko, Natalia; Wallauer, Jens; Winter, Christian; Huber, Benedikt; Endres, Frank; Roling, Bernhard

2012-04-21

Ionic liquids are of high interest for the development of safe electrolytes in modern electrochemical cells, such as batteries, supercapacitors and dye-sensitised solar cells. However, electrochemical applications of ionic liquids are still hindered by the limited understanding of the interface between electrode materials and ionic liquids. In this article, we first review the state of the art in both experiment and theory. Then we illustrate some general trends by taking the interface between the extremely pure ionic liquid 1-butyl-1-methylpyrrolidinium tris(pentafluoroethyl)trifluorophosphate and an Au(111) electrode as an example. For the study of this interface, electrochemical impedance spectroscopy was combined with in situ STM and in situ AFM techniques. In addition, we present new results for the temperature dependence of the interfacial capacitance and dynamics. Since the interfacial dynamics are characterised by different processes taking place on different time scales, the temperature dependence of the dynamics can only be reliably studied by recording and carefully analysing broadband capacitance spectra. Single-frequency experiments may lead to artefacts in the temperature dependence of the interfacial capacitance. We demonstrate that the fast capacitive process exhibits a Vogel-Fulcher-Tamman temperature dependence, since its time scale is governed by the ionic conductivity of the ionic liquid. In contrast, the slower capacitive process appears to be Arrhenius activated. This suggests that the time scale of this process is determined by a temperature-independent barrier, which may be related to structural reorganisations of the Au surface and/or to charge redistributions in the strongly bound innermost ion layer. This journal is © the Owner Societies 2012

Advances in percutaneous stone surgery

OpenAIRE

Hartman, Christopher; Gupta, Nikhil; Leavitt, David; Hoenig, David; Okeke, Zeph; Smith, Arthur

2015-01-01

Treatment of large renal stones has changed considerably in recent years. The increasing prevalence of nephrolithiasis has mandated that urologists perform more surgeries for large renal calculi than before, and this has been met with improvements in percutaneous stone surgery. In this review paper, we examine recent developments in percutaneous stone surgery, including advances in diagnosis and preoperative planning, renal access, patient position, tract dilation, nephroscopes, lithotripsy, ...

Stone-free-rate after extracorporeal shockwave lithotripsy in the management of pediatric renal stones in lower pole and other locations - a comparative study

International Nuclear Information System (INIS)

Iqbal, N.; Muhammad, S.; Akhter, S.

2016-01-01

To determine a difference in the stone-free-rate among different renal locations in children after extracorporeal shockwave lithotripsy (ESWL). Study Design: A descriptive study. Place and Duration of Study: Urology Department, Shifa International Hospital, Islamabad, Pakistan, from January 2007 to June 2015. Methodology: The study included children who underwent ESWL, divided into three groups based on location of stones in kidney as group A (lower pole stones), group B (upper and mid pole stones) and group C (renal pelvis stone), respectively. ESWL was done by standard technique using Storz Modulith SLX lithotripter 3rd generation. Data was collected by chart review. SPSS version 16 was used for data analysis. Results: Among 76 children with mean age of 7.55 +-4.16 years, 55 (72.4%) were males whereas 21 (27.6%) were females. Mean stone size was 1.08 +-0.59 cm. There were 34, 17 and 25 cases in groups A, B and C, respectively. PostESWL stone-free-rate was 47% in lower pole stones, 70.58% in upper and mid pole stones, and 68% in renal pelvis stones. Hematuria was seen in one patient from each group, sepsis in two patients from each of the mid pole/upper pole and lower pole group, while Steinstrasse in one patient from each group. (author)

The Stones and the Stars Building Scotland's Newest Megalith

CERN Document Server

Lunan, Duncan

2013-01-01

There are at least 48 identified prehistoric stone circles in Scotland.  In truth, very little is known about the people who erected them, and ultimately about what the stone circles were for.  Most stone circles are astronomically aligned, which has led to the modern debate over the significance of the alignments.  The megaliths certainly represented an enormous cooperative effort, would at the very least have demonstrated power and wealth, and being set away from any dwellings probably served a ceremonial, or perhaps religious, purpose. Observations at the site of the stone circles, of solar, lunar, and stellar events, have already cast light on some of the questions about the construction and use of ancient megalithic observatories. In his capacity as manager of the Glasgow Parks Department Astronomy Project, author Duncan Lunan designed and built in the late 1970s Sighthill, the first astronomically aligned stone circle in Britain in over 3,000 years.  The Stones and the Stars examines the case for as...

PIXE analysis of chinese chicken-blood stone

International Nuclear Information System (INIS)

Lin, E.K.; Wang, C.W.; Yu, Y.C.; Liu, T.Y.; Cheng, H.S.; Zhu, H.X.; Yang, H.J.

1999-01-01

This paper reports the chemical compositions of chicken-blood stone Ji Xue Shi measured by Proton Induced X-ray Emission (PIXE). The experimental result show that for the red portion of chicken-blood stone, the concentration of Hg is as high as 20 wt%, and the concentration of S can be above 10 wt%. For the non-red portion the main chemical compositions are Al 2 O 3 and SiO 2 . The obtained chemical compositions are close to those of kaolinite for Balin chicken-blood stone, and of pyrophyllite for Changhua chicken-blood stone, respectively. So far many Changhua chicken-blood stones and Balin chicken-blood stones were found in China, the PIXE method can be used to explore the provenance of available chicken-blood stones. (author)

Evaluation of Technetium Getters to Improve the Performance of Cast Stone

International Nuclear Information System (INIS)

Neeway, James J.; Qafoku, Nikolla P.; Serne, R. Jeffrey; Lawter, Amanda R.; Stephenson, John R.; Lukens, Wayne W.; Westsik, Joseph H.

2015-01-01

Cast Stone has been selected as the preferred waste form for solidification of aqueous secondary liquid effluents from the Hanford Tank Waste Treatment and Immobilization Plant (WTP) process condensates and low-activity waste (LAW) melter off-gas caustic scrubber effluents. Cast Stone is also being evaluated as a supplemental immobilization technology to provide the necessary LAW treatment capacity to complete the Hanford tank waste cleanup mission in a timely and cost effective manner. One of the major radionuclides that Cast Stone has the potential to immobilize is technetium (Tc). The mechanism for immobilization is through the reduction of the highly mobile Tc(VII) species to the less mobile Tc(IV) species by the blast furnace slag (BFS) used in the Cast Stone formulation. Technetium immobilization through this method would be beneficial because Tc is one of the most difficult contaminants to address at the U.S. Department of Energy (DOE) Hanford Site due to its complex chemical behavior in tank waste, limited incorporation in mid- to high-temperature immobilization processes (vitrification, steam reformation, etc.), and high mobility in subsurface environments. In fact, the Tank Closure and Waste Management Environmental Impact Statement for the Hanford Site, Richland, Washington (TC&WM EIS) identifies technetium-99 ( 99 Tc) as one of the radioactive tank waste components contributing the most to the environmental impact associated with the cleanup of the Hanford Site. The TC&WM EIS, along with an earlier supplemental waste-form risk assessment, used a diffusion-limited release model to estimate the release of different contaminants from the WTP process waste forms. In both of these predictive modeling exercises, where effective diffusivities based on grout performance data available at the time, groundwater at the 100-m down-gradient well exceeded the allowable maximum permissible concentrations for 99 Tc. (900 pCi/L). Recent relatively short-term (63 day

Evaluation of Technetium Getters to Improve the Performance of Cast Stone

Energy Technology Data Exchange (ETDEWEB)

Neeway, James J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Qafoku, Nikolla P. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Serne, R. Jeffrey [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lawter, Amanda R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Stephenson, John R. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Lukens, Wayne W. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Westsik, Joseph H. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

2015-11-01

Cast Stone has been selected as the preferred waste form for solidification of aqueous secondary liquid effluents from the Hanford Tank Waste Treatment and Immobilization Plant (WTP) process condensates and low-activity waste (LAW) melter off-gas caustic scrubber effluents. Cast Stone is also being evaluated as a supplemental immobilization technology to provide the necessary LAW treatment capacity to complete the Hanford tank waste cleanup mission in a timely and cost effective manner. One of the major radionuclides that Cast Stone has the potential to immobilize is technetium (Tc). The mechanism for immobilization is through the reduction of the highly mobile Tc(VII) species to the less mobile Tc(IV) species by the blast furnace slag (BFS) used in the Cast Stone formulation. Technetium immobilization through this method would be beneficial because Tc is one of the most difficult contaminants to address at the U.S. Department of Energy (DOE) Hanford Site due to its complex chemical behavior in tank waste, limited incorporation in mid- to high-temperature immobilization processes (vitrification, steam reformation, etc.), and high mobility in subsurface environments. In fact, the Tank Closure and Waste Management Environmental Impact Statement for the Hanford Site, Richland, Washington (TC&WM EIS) identifies technetium-99 (⁹⁹Tc) as one of the radioactive tank waste components contributing the most to the environmental impact associated with the cleanup of the Hanford Site. The TC&WM EIS, along with an earlier supplemental waste-form risk assessment, used a diffusion-limited release model to estimate the release of different contaminants from the WTP process waste forms. In both of these predictive modeling exercises, where effective diffusivities based on grout performance data available at the time, groundwater at the 100-m down-gradient well exceeded the allowable maximum permissible concentrations for ⁹⁹Tc. (900 pCi/L). Recent relatively

Optimum nutrition for kidney stone disease.

Science.gov (United States)

Heilberg, Ita P; Goldfarb, David S

2013-03-01

We summarize the data regarding the associations of individual dietary components with kidney stones and the effects on 24-hour urinary profiles. The therapeutic recommendations for stone prevention that result from these studies are applied where possible to stones of specific composition. Idiopathic calcium oxalate stone-formers are advised to reduce ingestion of animal protein, oxalate, and sodium while maintaining intake of 800 to 1200 mg of calcium and increasing consumption of citrate and potassium. There are few data regarding dietary therapy of calcium phosphate stones. Whether the inhibitory effect of citrate sufficiently counteracts increasing urine pH to justify more intake of potassium and citrate is not clear. Reduction of sodium intake to decrease urinary calcium excretion would also be expected to decrease calcium phosphate stone recurrence. Conversely, the most important urine variable in the causation of uric acid stones is low urine pH, linked to insulin resistance as a component of obesity and the metabolic syndrome. The mainstay of therapy is weight loss and urinary alkalinization provided by a more vegetarian diet. Reduction in animal protein intake will reduce purine ingestion and uric acid excretion. For cystine stones, restriction of animal protein is associated with reduction in intake of the cystine precursor methionine as well as cystine. Reduction of urine sodium results in less urine cystine. Ingestion of vegetables high in organic anion content, such as citrate and malate, should be associated with higher urine pH and fewer stones because the amino acid cystine is soluble in more alkaline urine. Because of their infectious origin, diet has no definitive role for struvite stones except for avoiding urinary alkalinization, which may worsen their development. Published by Elsevier Inc.

An Efficient Process for Pretreatment of Lignocelluloses in Functional Ionic Liquids

Directory of Open Access Journals (Sweden)

Shi-Jia Dong

2015-01-01

Full Text Available Background and Aims. The complex structure of the lignocelluloses is the main obstacle in the conversion of lignocellulosic biomass into valuable products. Ionic liquids provide the opportunities for their efficient pretreatment for biomass. Therefore, in this work, pretreatment of corn stalk was carried out in ultrasonic-assisted ionic liquid including 1-butyl-3-methylimidazolium chloride [BMIM]Cl, 1-H-3-methylimidazolium chloride [HMIM]Cl, and 1-(1-propylsulfonic-3-imidazolium chloride [HSO3-pMIM]Cl at 70°C for 2 h. We compared the pretreatments by ionic liquid with and without the addition of deionized water. Fourier transform infrared spectroscopy (FTIR and scanning electron microscopy (SEM were employed to analyze the chemical characteristics of regenerated cellulose-rich materials. Results. [HMIM]Cl and [HSO3-pMIM]Cl were effective in lignin extraction to obtain cellulose-rich materials. FTIR analysis and SEM analysis indicated the effective lignin removal and the reduced crystallinity of cellulose-rich materials. Enzymatic hydrolysis of cellulose-rich materials was performed efficiently. High yields of reducing sugar and glucose were obtained when the corn stalk was pretreated by [HMIM]Cl and [HSO3-pMIM]Cl. Conclusions. Ionic liquids provided the ideal environment for lignin extraction and enzymatic hydrolysis of corn stalk and [HMIM]Cl and [HSO3-pMIM]Cl proved the most efficient ionic liquids. This simple and environmentally acceptable method has a great potential for the preparation of bioethanol for industrial production.

Method and apparatus using an active ionic liquid for algae biofuel harvest and extraction

Science.gov (United States)

Salvo, Roberto Di; Reich, Alton; Dykes, Jr., H. Waite H.; Teixeira, Rodrigo

2012-11-06

The invention relates to use of an active ionic liquid to dissolve algae cell walls. The ionic liquid is used to, in an energy efficient manner, dissolve and/or lyse an algae cell walls, which releases algae constituents used in the creation of energy, fuel, and/or cosmetic components. The ionic liquids include ionic salts having multiple charge centers, low, very low, and ultra low melting point ionic liquids, and combinations of ionic liquids. An algae treatment system is described, which processes wet algae in a lysing reactor, separates out algae constituent products, and optionally recovers the ionic liquid in an energy efficient manner.

Effect of blind treatment on stone disease.

Science.gov (United States)

Fazil Marickar, Y M; Salim, Abiya; Vijay, Adarsh

2010-06-01

Most of the drugs administered to stone patients appear to be inappropriate and doing more harm than good to the patients. The objective of this paper is to identify the prevalence of blind chemotherapy among the stone patients and find out the real indication for the drugs administered. Patients who attended the stone clinic for the first time were interviewed to find out what drugs they had been taking before the attendance at the stone clinic. 350 patients consuming specific drugs relevant to stone formation at least for a period of 15 days were selected for a detailed assessment. The type of drug consumed, the dose, the duration, the side effects, compliance rate and effect on stone disease were assessed. The biochemical profile of the patients was assessed to identify the role of the therapeutic modalities utilised. Conclusions regarding the utility of drugs in the process of stone formation were made. The values were compared with those of patients not on medication and considering laboratory standards. Of the 350 patients studied, 96 patients were consuming potassium citrate in different doses, 50 were consuming allopurinol, 44 cystone, 27 potassium citrate + magnesium, 25 calcury, 24 rowatinex, 21 ayurvedic drugs, 17 dystone, 17 homeopathic medicines and 17 other drugs. The longest duration of compliance was for cystone-2.5 years. All other drugs were stopped by the patients themselves due to recurrence of symptoms. As much as 93% of the patients did not feel that there was any significant relief of symptoms. The side effects which prompted the patients to stop medicine were gastro intestinal upset, particularly with potassium citrate, rowatinex and potassium citrate + magnesium combination. The relevant biochemical changes noted were increased urinary citrate levels in patients consuming potassium citrate alone or in combination with magnesium. Serum uric acid was within normal limits in patients consuming allopurinol. Urine uric acid levels were also

Efficacy of surgical techniques and factors affecting residual stone rate in the treatment of kidney stones.

Science.gov (United States)

Aydemir, Hüseyin; Budak, Salih; Kumsar, Şükrü; Köse, Osman; Sağlam, Hasan Salih; Adsan, Öztuğ

2014-09-01

In this study, we aimed to evaluate, the efficacy of surgical methods and the factors affecting the residual stone rate by scrutinizing retrospectively the patients who had undergone renal stone surgery. Records of 109 cases of kidney stones who had been surgically treated between January 2010, and July 2013 were reviewed. Patients were divided into three groups in terms of surgical treatment; open stone surgery, percutaneous nephrolithotomy (PNL) and retrograde intrarenal surgery (RIRS). Patients' history, physical examination, biochemical and radiological images and operative and postoperative data were recorded. The patients had undergone PNL (n=74; 67.9%), RIRS (n=22;20.2%), and open renal surgery (n=13; 11.9%). The mean and median ages of the patients were 46±9, 41 (21-75) and, 42 (23-67) years, respectively. The mean stone burden was 2.6±0.7 cm(2) in the PNL, 1.4±0.1 cm(2) in the RIRS, and 3.1±0.9 cm(2) in the open surgery groups. The mean operative times were 126±24 min in the PNL group, 72±12 min in the RIRS group and 82±22 min in the open surgery group. The duration of hospitalisation was 3.1±0.2 days, 1.2±0.3 days and 3.4±1.1 days respectively. While the RIRS group did not need blood transfusion, in the PNL group blood transfusions were given in the PNL (n=18), and open surgery (n=2) groups. Residual stones were detected in the PNL (n=22), open surgery (n=2), and RIRS (n=5) groups. PNL and RIRS have been seen as safe and effective methods in our self application too. However, it should not be forgotten that as a basical method, open surgery may be needed in cases of necessity.

Pharmacognostical study of Tamalaki (Phyllanthus fraternus Webster), a herb used in Tamaka-svasa

Science.gov (United States)

Sen, Binay; Dubey, S. D.; Tripathi, K.

2011-01-01

Tamalaki is a herbacious medicinal plant, described in Ayurvedic texts in many occurrences with different properties, actions, uses and synonyms, supposed to indicate more than one species commonly used in practice. Modern scholars mostly suggest Phyllanthus fraternus Webster (syn. P. niruri Linn.), P. amarus Schum. and Thonn. and P. urinaria Linn. as the source plants of Tamalaki. In this study, an attempt has been made to designate P. fraternus as the source plant of Tamalaki used in the treatment of Tamaka-svasa (Bronchial asthma) and other respiratory disorders by analyzing therapeutic uses, actions, properties, taste, synonyms as well as pharmacognostical characters. Smooth capsule, six tepals, less and short fibrous root, pentagonal outline with wing-shaped young stem are some of the specific characters observed in this species. PMID:22529659

Clinical trial of non-ionic contrast media -comparison of efficacy and safety between non-ionic iopromide (Ultravist) and ionic contrast media-

International Nuclear Information System (INIS)

Lee, Ghi Jai; Kim, Seung Hyup; Park, Jae Hyung; Chang, Kee Hyun; Han, Man Chung; Kim, Chu Wan

1988-01-01

Non-ionic contrast media, iopromide (Ultravist) was compared with ioxitalamate (Telebrix) and/or ioxaglate (Hexabrix) for efficacy and safety in 203 patients undergoing cardiac angiography, neurovascular angiography, peripheral and visceral angiography and intravenous pyelography. In all patients, adverse symptoms and signs including heat sense, pain, nausea, vomiting, etc. were checked during and after the injection. In addition, EKG and LV pressure were monitored during the cardiac angiography. And also CBC, UA, BUN and creatinine were checked before and 24 hours after the cardiac angiography. Serious adverse effect did not occur in any case. Minor effects, such as nausea and abdominal pain, were less frequently caused by non-ionic contrast media than by ionic contrast media, especially in cardiac angiography and intravenous pyelography. There was no significant difference between ionic and non-ionic contrast media in regard to electrophysiologic parameters such as EKG and LV pressure. In case of intravenous pyelography, nonionic contrast media seemed to be superior to ionic contrast media in image quality. It is suggested that, in spite of higher cost, non-ionic contrast media be needed for the safety and image quality, particularly in those patients at high risk of adverse effects by ionic contrast media

Stone comminution correlates with the average peak pressure incident on a stone during shock wave lithotripsy.

Science.gov (United States)

Smith, N; Zhong, P

2012-10-11

To investigate the roles of lithotripter shock wave (LSW) parameters and cavitation in stone comminution, a series of in vitro fragmentation experiments have been conducted in water and 1,3-butanediol (a cavitation-suppressive fluid) at a variety of acoustic field positions of an electromagnetic shock wave lithotripter. Using field mapping data and integrated parameters averaged over a circular stone holder area (R(h)=7 mm), close logarithmic correlations between the average peak pressure (P(+(avg))) incident on the stone (D=10 mm BegoStone) and comminution efficiency after 500 and 1000 shocks have been identified. Moreover, the correlations have demonstrated distinctive thresholds in P(+(avg)) (5.3 MPa and 7.6 MPa for soft and hard stones, respectively), that are required to initiate stone fragmentation independent of surrounding fluid medium and LSW dose. These observations, should they be confirmed using other shock wave lithotripters, may provide an important field parameter (i.e., P(+(avg))) to guide appropriate application of SWL in clinics, and facilitate device comparison and design improvements in future lithotripters. Copyright © 2012 Elsevier Ltd. All rights reserved.

Sarsen Stones of Stonehenge: How and by what route were the stones transported? What is the significance of their markings?

Science.gov (United States)

Hill, P A

1961-04-21

A route via Lockeridge and the Avon Valley, involving a slide down the chalk escarpment, is postulated for the sarsen stones of Stonehenge. The transportation problem would have been greatly simplified if the stones had been relayed from point to point over snow or slush during successive winters. Markings on the stones hitherto undescribed are interpreted.

The effect of inclined position on stone free rates in patients with lower caliceal stones during SWL session

Directory of Open Access Journals (Sweden)

Basri Cakiroglu

2015-03-01

Full Text Available Objective: To compare the outcomes of shock wave lithotripsy (SWL combined with inclined position and SWL alone in patients with lower pole calyx stones. Methods: Seven hundred forty patients who underwent SWL treatment for lower pole renal stones with a total diameter of 2 cm or less were prospectively randomized into two groups. They were comparable in terms of age, sex, and stone diameters. Patients with lower calyceal stones (4-20 mm were randomized to SWL (368 patients or SWL with simultaneous inclination (372 patients with 30o head down Trendelenburg position. Shock wave and session numbers were standardized according to stone size. Additional standardized shock waves were given to patients with stone fragments determined by kidney urinary bladder film and ultrasound at weeks 1, 4, 10. Results: The overall stone free rate (SFR was 73% (268/368 in patients with SWL alone and 81% (300/372 in SWL with inclination at the end of 12th week (p = 0.015. No significant adverse events were noted in both treatment groups. Conclusion: Simultaneous inclination of patients during SWL session increase SFR in lower caliceal stones significantly compared to SWL treatment alone.

Clinical use of patient decision-making aids for stone patients.

Science.gov (United States)

Lim, Amy H; Streeper, Necole M; Best, Sara L; Penniston, Kristina L; Nakada, Stephen Y

2017-08-01

Patient decision-making aids (PDMAs) help patients make informed healthcare decisions and improve patient satisfaction. The utility of PDMAs for patients considering treatments for urolithiasis has not yet been published. We report our experience using PDMAs developed at our institution in the outpatient clinical setting in patients considering a variety of treatment options for stones. Patients with radiographically confirmed urolithiasis were given PDMAs regarding treatment options for their stone(s) based on their clinical profile. We assessed patients' satisfaction, involvedness, and feeling of making a more informed decision with utilization of the PDMAs using a Likert Scale Questionnaire. Information was also collected regarding previous stone passage, history and type of surgical intervention for urolithiasis, and level of education. Patients (n = 43; 18 males, 23 females and two unknown) 53 +/- 14years old were included. Patients reported that they understood the advantages and disadvantages outlined in the PDMAs (97%), that the PDMAs helped them make a more informed decision (83%) and felt more involved in the decision making process (88%). Patients reported that the aids were presented in a balanced manner and used up-to-date scientific information (100%, 84% respectively). Finally, a majority of the patients prefer an expert's opinion when making a treatment decision (98%) with 73% of patients preferring to form their own opinion based on available information. Previous stone surgery was associated with patients feeling more involved with the decision making process (p = 0.0465). PDMAs have a promising role in shared decision-making in the setting of treatment options for nephrolithiasis.

ORIGINAL PAPER ORIG ORIG Percutaneous stone removal

African Journals Online (AJOL)

Percutaneous nephrolithotomy (PCNL) is an effective procedure to treat patients with complex renal stones,. e.g. staghorn calculi and stones greater than 20 mm in diameter. The treatment of choice for small, less com- plex renal stones is extracorporeal shock-wave litho- tripsy (ESWL).1 We have treated renal stones mainly.

Correlations between phase behaviors and ionic conductivities of (ionic liquid + alcohol) systems

International Nuclear Information System (INIS)

Park, Nam Ku; Bae, Young Chan

2010-01-01

To understand the basic properties of ionic liquids (ILs), we examined the phase behavior and ionic conductivity characteristics using various compositions of different ionic liquids (1-ethyl-3-methylimidazolium hexafluorophosphate [emim] [PF6] and 1-benzyl-3-methylimidazolium hexafluorophosphate [bzmim] [PF6]) in several different alcohols (ethanol, propanol, 1-butanol, 2-butanol, and hexanol). We conducted a systematic study of the impact of different factors on the phase behavior of imidazolium-based ionic liquids in alcohols. Using a new experimental method with a liquid electrolyte system, we observed that the ionic conductivity of the ionic liquid/alcohol was sensitive to the surrounding temperature. We employed Chang et al.'s thermodynamic model [Chang et al. (1997, 1998) ] based on the lattice model. The obtained co-ordinated unit parameter from this model was used to describe the phase behavior and ionic conductivities of the given system. Good agreement with experimental data of various alcohol and ILs systems was obtained in the range of interest.

Research of environmentally-friendly utilization methods of the crushed stone waste on granite quarries

Directory of Open Access Journals (Sweden)

Levytskyi V.G.

2017-12-01

Full Text Available The analysis of activity of stone-mining enterprises shows the low competitiveness of crushed stone products Upgrading the quality of crushed stone and production of the European standard fractions requires to use of new technologies and equipment. The main waste of crushed stone pits is сrushed granite waste, which high percent of an exit is caused by outdated equipment and incorrectly selected technological parameters of the crushing process. Crushed-granite waste is stored in dumps which occupy large areas and negatively effect on production area ecology. In November 2017, the Government of Ukraine accepted the National Waste Management Strategy until 2030, the main aim of it is develop a strategy of the mineral raw materials balanced use and international standards introduction at the national level. Therefore, the problem of complex utilization and recycling of waste from stone-mining enterprises with receiving a qualitative secondary product is relevant. The publication presents the сrushed granite waste volumes by crushed stone pit, its properties and main directions of utilization. The ecological influence of waste dumps, in particular granite dust, on the environment and human, the strategy of using non-waste technologies and ecological features of сrushed granite waste secondary processing are considered

Nanobacteria: An Infectious Cause for Salivary Stone Formation and Recurrence

Directory of Open Access Journals (Sweden)

Amr A El Badry

2010-01-01

Full Text Available Nanobacteria (NB contribute to pathological calcification in the human and animal body. It has been isolated from salivary stones and suggested that it may act as a nucleus for the initiation of these stones. In the present study, we examined its role in the recurrent salivary gland stones using immunodetection with NB-specific monoclonal antibodies and scanning electron microscopy (SEM hoping to provide a method for preventing the recurrence of these stones in the patient that has suffered from salivary stones. Our study comprised 30 patients with recurrent salivary gland stones (group I and 30 patients with salivary gland stones for the first time (group II, in addition to 30 normal controls (group III. We could detect 100–500 nm nanoparticles in 24/30 (80% cases in group I with significant difference <0.05 and <0.01 when compared with group II and group III in which they were detected in 19/30 (63.3% and 6/30 (20% respectively. Also there was a significant difference <0.05 between group II and group III. We proposed that salivary stone formation is a nanobacterial disease initiated by bacterial infection. This bacteria may play an important role in the recurrence of salivary stone. So the use of calcium chelator, ethylene diamine tetra acetic acid (EDTA, before or in combination with the suitable antibiotic that is given in an amount effective to inhibit or prevent the growth and development of nanobacteria may eradicate these stones and prevent their recurrence.

Advances in percutaneous stone surgery.

Science.gov (United States)

Hartman, Christopher; Gupta, Nikhil; Leavitt, David; Hoenig, David; Okeke, Zeph; Smith, Arthur

2015-01-01

Treatment of large renal stones has changed considerably in recent years. The increasing prevalence of nephrolithiasis has mandated that urologists perform more surgeries for large renal calculi than before, and this has been met with improvements in percutaneous stone surgery. In this review paper, we examine recent developments in percutaneous stone surgery, including advances in diagnosis and preoperative planning, renal access, patient position, tract dilation, nephroscopes, lithotripsy, exit strategies, and post-operative antibiotic prophylaxis.

Do Urinary Cystine Parameters Predict Clinical Stone Activity?

Science.gov (United States)

Friedlander, Justin I; Antonelli, Jodi A; Canvasser, Noah E; Morgan, Monica S C; Mollengarden, Daniel; Best, Sara; Pearle, Margaret S

2018-02-01

An accurate urinary predictor of stone recurrence would be clinically advantageous for patients with cystinuria. A proprietary assay (Litholink, Chicago, Illinois) measures cystine capacity as a potentially more reliable estimate of stone forming propensity. The recommended capacity level to prevent stone formation, which is greater than 150 mg/l, has not been directly correlated with clinical stone activity. We investigated the relationship between urinary cystine parameters and clinical stone activity. We prospectively followed 48 patients with cystinuria using 24-hour urine collections and serial imaging, and recorded stone activity. We compared cystine urinary parameters at times of stone activity with those obtained during periods of stone quiescence. We then performed correlation and ROC analysis to evaluate the performance of cystine parameters to predict stone activity. During a median followup of 70.6 months (range 2.2 to 274.6) 85 stone events occurred which could be linked to a recent urine collection. Cystine capacity was significantly greater for quiescent urine than for stone event urine (mean ± SD 48 ± 107 vs -38 ± 163 mg/l, p stone activity (r = -0.29, p r = -0.88, p r = -0.87, p stone quiescence. Decreasing the cutoff to 90 mg/l or greater improved sensitivity to 25.2% while maintaining specificity at 90.9%. Our results suggest that the target for capacity should be lower than previously advised. Copyright © 2018 American Urological Association Education and Research, Inc. Published by Elsevier Inc. All rights reserved.

Ionic liquids, electrolyte solutions including the ionic liquids, and energy storage devices including the ionic liquids

Science.gov (United States)

Gering, Kevin L.; Harrup, Mason K.; Rollins, Harry W.

2015-12-08

An ionic liquid including a phosphazene compound that has a plurality of phosphorus-nitrogen units and at least one pendant group bonded to each phosphorus atom of the plurality of phosphorus-nitrogen units. One pendant group of the at least one pendant group comprises a positively charged pendant group. Additional embodiments of ionic liquids are disclosed, as are electrolyte solutions and energy storage devices including the embodiments of the ionic liquid.

Melting behaviour of raw materials and recycled stone wool waste

DEFF Research Database (Denmark)

Schultz-Falk, Vickie; Agersted, Karsten; Jensen, Peter Arendt

2018-01-01

Stone wool is a widely used material for building insulation, to provide thermal comfort along with fire stability and acoustic comfort for all types of buildings. Stone wool waste generated either during production or during renovation or demolition of buildings can be recycled back into the sto...... wool melt production. This study investigates and compares the thermal response and melting behaviour of a conventional stone wool charge and stone wool waste. The study combines differential scanning calorimetry (DSC), hot stage microscopy (HSM) and X-ray diffraction (XRD). DSC reveals...... that the conventional charge and stone wool waste have fundamentally different thermal responses, where the charge experiences gas release, phase transition and melting of the individual raw materials. The stone wool waste experiences glass transition, crystallization and finally melting. Both DSC and HSM measurements...

Modeling Stone Columns.

Science.gov (United States)

Castro, Jorge

2017-07-11

This paper reviews the main modeling techniques for stone columns, both ordinary stone columns and geosynthetic-encased stone columns. The paper tries to encompass the more recent advances and recommendations in the topic. Regarding the geometrical model, the main options are the "unit cell", longitudinal gravel trenches in plane strain conditions, cylindrical rings of gravel in axial symmetry conditions, equivalent homogeneous soil with improved properties and three-dimensional models, either a full three-dimensional model or just a three-dimensional row or slice of columns. Some guidelines for obtaining these simplified geometrical models are provided and the particular case of groups of columns under footings is also analyzed. For the latter case, there is a column critical length that is around twice the footing width for non-encased columns in a homogeneous soft soil. In the literature, the column critical length is sometimes given as a function of the column length, which leads to some disparities in its value. Here it is shown that the column critical length mainly depends on the footing dimensions. Some other features related with column modeling are also briefly presented, such as the influence of column installation. Finally, some guidance and recommendations are provided on parameter selection for the study of stone columns.

Nanoarchitecture Control Enabled by Ionic Liquids

Science.gov (United States)

Murdoch, Heather A.; Limmer, Krista R.; Labukas, Joseph P.

2017-04-01

Ionic liquids have many advantages over traditional aqueous electrosynthesis for fabrication of functional nanoarchitectures, including enabling the integration of nanoparticles into traditional coatings, superhydrophobicity, nanofoams, and other hierarchical structures. Shape and size control through ionic liquid selection and processing conditions can synthesize nanoparticles and nanoarchitectures without the use of capping agents, surfactants, or templates that are often deleterious to the functionality of the resultant system. Here we give a brief overview of some recent and interesting applications of ionic liquids to the synthesis of nanoparticles and nanoarchitectures.

Evolution of stone management in Australia.

Science.gov (United States)

Lee, Ming-Chak; Bariol, Simon Virgil

2011-11-01

What's known on the subject? and What does the study add? There is very little contemporary data regarding stone management in Australia. This study assesses the impact of technological advances on stone management practises, and raises questions as to why there is an increasing rate of intervention for stone disease in Australia. Knowledge of management trends as demonstrated in this paper give individual surgeons a guideline for contemporary practise in this country. • To examine trends in the operative management of upper urinary tract stone disease in Australia over the past 15 years. • The Medicare Australia and Australian Institute of Health and Welfare databases were used to determine the annual number of renal colic presentations and procedural interventions undertaken for stone disease. • In Australia over the past 15 years, the annual number of procedural interventions for upper urinary tract stones has increased, primarily due to the rising number of endoscopic procedures performed. • During this period, shock wave lithotripsy numbers have remained steady whilst open and percutaneous procedures have been in decline. • The introduction of and subsequent preference for less invasive techniques has changed the management pathway of patients presenting with stone disease in Australia. • Further studies are necessary to determine whether this escalation in endoscopic procedures is due to an increase in the incidence of stone disease, earlier detection, a lower intervention threshold or a higher retreatment rate. © 2011 THE AUTHORS. BJU INTERNATIONAL © 2011 BJU INTERNATIONAL.

Ionic liquids: radiation chemistry, solvation dynamics and reactivity patterns

International Nuclear Information System (INIS)

Wishart, J.F.; Funston, A.M.; Szreder, T.

2006-01-01

Ionic liquids (ILs) are a rapidly expanding family of condensed-phase media with important applications in energy production, nuclear fuel and waste processing, improving the efficiency and safety of industrial chemical processes, and pollution prevention. ILs are nonvolatile, noncombustible, highly conductive, recyclable and capable of dissolving a wide variety of materials. They are finding new uses in chemical synthesis, catalysis, separations chemistry, electrochemistry and other areas. Ionic liquids have dramatically different properties compared to conventional molecular solvents, and they provide a new and unusual environment to test our theoretical understanding of charge transfer and other reactions. We are interested in how IL properties influence physical and dynamical processes that determine the stability and lifetimes of reactive intermediates and thereby affect the courses of chemical reactions and product distributions. Successful use of ionic liquids in radiation-filled environments, where their safety advantages could be significant, requires an understanding of ionic liquid radiation chemistry. For example, characterizing the primary steps of IL radiolysis will reveal radiolytic degradation pathways and suggest ways to prevent them or mitigate their effects on the properties of the material. An understanding of ionic liquid radiation chemistry will also facilitate pulse radiolysis studies of general chemical reactivity in ILs, which will aid in the development of energy production, chemical industry and environmental applications. Pulse radiolysis of [R 4 N][NTf 2 ] [R 4 N][N(CN) 2 ], and [R 4 P][N(CN) 2 ] ionic liquids produces solvated electrons that absorb over a broad range in the near infrared and persisting for hundreds of nanoseconds. Systematic cation variation shows that solvated electron's spectroscopic properties depend strongly on the lattice structure of the ionic liquid. Very early in our radiolysis studies it became evident that

Effect of Stone Size and Composition on Ultrasonic Propulsion Ex Vivo.

Science.gov (United States)

Janssen, Karmon M; Brand, Timothy C; Bailey, Michael R; Cunitz, Bryan W; Harper, Jonathan D; Sorensen, Mathew D; Dunmire, Barbrina

2018-01-01

To evaluate in more detail the effectiveness of a new designed more efficient ultrasonic propulsion for large stones and specific stone compositions in a tissue phantom model. In the first clinical trial of noninvasive ultrasonic propulsion, urinary stones of unknown compositions and sizes up to 10 mm were successfully repositioned. The study included 8- to 12-mm stones of 4 different primary compositions (calcium oxalate monohydrate, ammonium acid urate, calcium phosphate, and struvite) and a renal calyx phantom consisting of a 12 mm × 30 mm well in a 10-cm block of tissue-mimicking material. Primary outcome was the number of times a stone was expelled over 10 attempts, with ultrasonic propulsion burst duration varying from 0.5 seconds to 5 seconds. Overall success rate at expelling stones was 95%. All calcium oxalate monohydrate and ammonium acid urate stones were expelled 100% of the time. The largest stone (12 mm) became lodged within the 12-mm phantom calyx 25% of the time regardless of the burst duration. With the 0.5-second burst, there was insufficient energy to expel the heaviest stone (0.88 g), but there was sufficient energy at the longer burst durations. With a single burst, ultrasonic propulsion successfully moved most stones at least 3 cm and, regardless of size or composition, expelled them from the calyx. Ultrasonic propulsion is limited to the stones smaller than the calyceal space, and for each burst duration, related to maximum stone mass. Published by Elsevier Inc.

Intraperitoneal stone migration during percutaneos nephrolithotomy

Directory of Open Access Journals (Sweden)

Akif Diri

2014-12-01

Full Text Available Percutaneos nephrolithotomy (PNL is the standard care for renal stones larger than 2 cm. The procedure has some major and minor complications. Renal pelvis laceration and stone migration to the retroperitoneum is one of the rare condition. We report the first case of intraperitoneal stone migration during PNL.

Stone stability under non-uniform flow

NARCIS (Netherlands)

Hoan, N.T.

2008-01-01

Despite the fact that many studies on the stability of stones in bed protections under flowing water have been conducted, our knowledge is still far from advanced and reliable. Issues like how to quantify the hydraulic loads exerted on the stones on a bed and the associated stability of the stones

Thermoluminescence of pyramid stones

International Nuclear Information System (INIS)

Gomaa, M.A.; Eid, A.M.

1982-01-01

It is the aim of the present study to investigate some thermoluminescence properties of pyramid stones. Using a few grammes of pyramid stones from Pyramids I and II, the TL glow peaks were observed at 250 and 310 0 C, respectively. The TL glow peaks of samples annealed at 600 0 C, then exposed to 60 Co γ-rays were observed at 120, 190 and 310 0 C, respectively. The accumulated dose of natural samples is estimated to be around 310 Gray (31 krad). By assuming an annual dose is 1 mGy, the estimated age of pyramid stones is 0.31 M year. (author)

Thermoluminescence of pyramid stones

Energy Technology Data Exchange (ETDEWEB)

Gomaa, M A; Eid, A M [Atomic Energy Establishment, Cairo (Egypt)

1982-01-01

It is the aim of the present study to investigate some thermoluminescence properties of pyramid stones. Using a few grammes of pyramid stones from Pyramids I and II, the TL glow peaks were observed at 250 and 310/sup 0/C, respectively. The TL glow peaks of samples annealed at 600/sup 0/C, then exposed to /sup 60/Co ..gamma..-rays were observed at 120, 190 and 310/sup 0/C, respectively. The accumulated dose of natural samples is estimated to be around 310 Gray (31 krad). By assuming an annual dose is 1 mGy, the estimated age of pyramid stones is 0.31 M year.

A Boy with a Large Bladder Stone

Directory of Open Access Journals (Sweden)

Kuo-Shen Chow

2008-08-01

Full Text Available Despite the frequent association of urinary tract infection with vesicoureteral reflux and urinary calculi, since vesicouretal reflux is induced by bladder stones, the coexistence of vesicoureteral reflux and bladder stones is rare. Because of its occurrence in children belonging to poor socioeconomic groups, it is believed to be a deficiency disorder. Most cases of bladder stones occur between the ages of 2 and 5 years. Common clinical presentations of bladder stones include urinary dribbling and enuresis, frequency of micturition, pain during micturition, pelvic pain and hematuria. We report the occurrence of a large bladder stone in a boy, who experienced intermittent lower abdominal pain and urinary incontinence, both during the day and at night. He had been diagnosed with enuresis and treated in pediatric clinics for 1 year. Delayed diagnosis resulted in bladder stone formation. The stone was larger than 2.5 cm and open vesicolithotomy was therefore selected as the best and safest treatment choice. His symptoms disappeared after surgery. Thorough metabolic and environmental evaluations of such cases are required on an individual basis. Bladder stones should be considered as a possible diagnosis in children presenting with urinary incontinence.

IONIC LIQUIDS: RADIATION CHEMISTRY, SOLVATION DYNAMICS AND REACTIVITY PATTERNS

International Nuclear Information System (INIS)

WISHART, J.F.

2007-01-01

energy production, nuclear fuel and waste processing, improving the efficiency and safety of industrial chemical processes, and pollution prevention. ILs are generally nonvolatile, noncombustible, highly conductive, recyclable and capable of dissolving a wide variety of materials. They are finding new uses in chemical synthesis, catalysis, separations chemistry, electrochemistry and other areas. Ionic liquids have dramatically different properties compared to conventional molecular solvents, and they provide a new and unusual environment to test our theoretical understanding of charge transfer and other reactions. We are interested in how IL properties influence physical and dynamical processes that determine the stability and lifetimes of reactive intermediates and thereby affect the courses of chemical reactions and product distributions. Successful use of ionic liquids in radiation-filled environments, where their safety advantages could be significant, requires an understanding of ionic liquid radiation chemistry. For example, characterizing the primary steps of IL radiolysis will reveal radiolytic degradation pathways and suggest ways to prevent them or mitigate their effects on the properties of the material. An understanding of ionic liquid radiation chemistry will also facilitate pulse radiolysis studies of general chemical reactivity in ILs, which will aid in the development of applications listed above. Very early in our radiolysis studies it became evident that slow solvation dynamics of the excess electron in ILs (which vary over a wide viscosity range) increases the importance of pre-solvated electron reactivity and consequently alters product distributions. Parallel studies of IL solvation phenomena using coumarin-153 dynamic Stokes shifts and polarization anisotropy decay rates are done to compare with electron solvation studies and to evaluate the influence of ILs on charge transport processes. Methods. Picosecond pulse radiolysis studies at BNL

Algorithm for definition of stones components at kidney-stones illness using two-energetic digital roentgen-graphic method

International Nuclear Information System (INIS)

Nedavnij, O.I.; Osipov, S.P.

2001-01-01

Paper presents the algorithm for definition of stone composition in case of kidney-stones using two-energy digital X-ray photography. One calculated the values of p information parameter for the main types of stones within 40-150 keV energy range. It was shown that p parameter dependence on energy was not essential one (maximum 3.5% deviation), p value for various chemical compositions of kidney stones ranged from 15% (calcium phosphate and calcium oxalate) up to 70% (calcium lactate and calcium oxalate). The conducted studies enable to make a conclusion about the possibility to define material representing the heart of kidney stones using two-energy digital X-ray photography. Paper includes recommendations on selection of the optimal energy values [ru

Bacterial bio-mediated calcite precipitation for monumental stones conservation: methods of evaluation.

Science.gov (United States)

Tiano, P; Biagiotti, L; Mastromei, G

1999-05-01

The weathering of monumental stones is a complex process inserted in the more general 'matter transformation cycle' operated by physical, chemical and biological factors. The consequence of these combined actions is a loss of cohesion with dwindling and scaling of stone material and the induction of a progressive mineral matrix dissolution. In the case of calcareous stones, calcite leaching increases the material porosity and decreases its mechanical features with a general weakening of the superficial structural strength. Attempts to stop, or at least to slow down, deterioration of monumental stones has been made by conservative treatments with both inorganic or organic products. More recent studies show a new approach to hinder these phenomena by inducing a bio-mediated precipitation of calcite directly inside the stone porosity. This can be achieved either through the application of organic matrix macromolecules extracted from sea shells or of living bacteria. The effectiveness of the treatment using calcinogenic bacteria has been evaluated with laboratory tests specifically developed to evaluate the parameters such as : porosity, superficial strength and chromatic changes, influenced by the treatment itself. The results obtained seem to indicate that this type of treatment might not be suitable for monumental stone conservation.

Journey of a cystinuric patient with a long-term follow-up from a medical stone clinic: necessity to be SaFER (stone and fragments entirely removed).

Science.gov (United States)

Moore, Sacha L; Somani, Bhaskar K; Cook, Paul

2018-04-25

There is a lack of studies looking at the longitudinal follow-up of patients with cystine stones. We wanted to assess the journey of cystinuric patients through our specialist metabolic stone clinic to improve the understanding of episodes, interventions and current outcomes in this patient cohort. After ethical approval, all patients who attended our metabolic stone clinic from 1994 to 2014 with at least one cystine stone episode were included in our study. Data were retrospectively analysed for patient demographics, stone episodes or intervention, clinical parameters and patient compliance. Over a period of 21 years, 16 patients with a median age of 15.5 years underwent a mean follow-up of 8.6 years (1-21 years). The mean number of surgical interventions was 3.1 (1-8/patient), but patients who were stone free after their first treatment had lower recurrences (p = 0.91) and lower number of interventions during their follow-up (2.7/patient, compared to those who were not stone free at 4/patient). During their follow-up period, patients with stone episodes (r 2  = 0.169). It was also noted that patients who began early medical management remained stone free during follow-up compared to those who had medical management after ≥ 2 stone episodes, of whom all had a recurrent episode. Our long-term longitudinal study of cystine stone formers highlights that patients who are stone free and receive early metabolic stone screening and medical management after their initial presentation have the lowest recurrence rates and tend to preserve their renal function. Hence, prompt referral for metabolic assessment, and the stone and fragments entirely removed (SaFER) principles are key to preventing stone episodes and improving long-term function.

Occasional, obligatory, and habitual stone tool use in hominin evolution.

Science.gov (United States)

Shea, John J

2017-09-01

Archeologists have long assumed that earlier hominins were obligatory stone tool users. This assumption is deeply embedded in traditional ways of describing the lithic record. This paper argues that lithic evidence dating before 1.7 Ma reflects occasional stone tool use, much like that practiced by nonhuman primates except that it involved flaked-stone cutting tools. Evidence younger than 0.3 Ma is more congruent with obligatory stone tool use, like that among recent humans. The onset of habitual stone tool use at about 1.7 Ma appears correlated with increased hominin logistical mobility (carrying things). The onset of obligatory stone tool use after 0.3 Ma may be linked to the evolution of spoken language. Viewing the lithic evidence dating between 0.3-1.7 Ma as habitual stone tool use explains previously inexplicable aspects of the Early-Middle Pleistocene lithic record. © 2017 Wiley Periodicals, Inc.

Female stone disease: the changing trend.

Science.gov (United States)

Marickar, Y M Fazil; Vijay, Adarsh

2009-12-01

This paper has attempted to assess the changes noted in the trends in the incidence and biochemical pattern of female urolithiasis patients during the period 1971-2008. A prospective descriptive clinical study was done on 8,590 stone patients belonging to both sexes treated at the urinary stone clinic. The incidence of stone disease among the two sexes was plotted. The various metabolic parameters including 24-h urine volume, urine calcium, phosphorus, uric acid, oxalate, magnesium, creatinine and citrate, serum creatinine, calcium, phosphorus, uric acid and magnesium and calculated parameter calcium:magnesium ratio were studied. The possible causes for the change in incidence of stone disease in the female sex were elucidated. Of the patients studied, 12.7% (1,091) were females. There was a definite increase in the incidence of female urolithiasis over the past 37 years (P stone genesis, together with the increased excretion of calcium and oxalate may have contributed to the increasing incidence of stone disease in females. This might be due to changes in living standards and dietary habits.

Artificial porous stone from of ornamental rock waste adaptable for civil construction and heritage restoration

International Nuclear Information System (INIS)

Durán Suárez, J.A.; García Casco, A.

2017-01-01

The technique of volumetric reintegration in severely deteriorated stone materials is of major importance for the restoration of architectural heritage. In using mortars for restoration it is important to control aspects such as the colour and textural similarity in relation to the adjacent stone, minor or equal strength and equal or greater porosity/permeability with respect to the original stone. This latter aspect is of particular complexity because the percentage distribution of pore-size ranges should not differ from that of the original stone material. The invention patent (with numbers of publication ES2187245 A1 and B1 16. 06. 2004), owned by the University of Granada, allows the production of excellent porous stones for decorative work in construction and mortar for restoration of stone materials with controlled porosity. Both materials consist of ornamental rock waste, so that a particular recycling purpose is given to this type of material which is difficult to reuse. In this paper we present the manufacturing process of these artificial stones and porous mortars with decorative and restorative purposes, from the controlled mixture of aggregates of ornamental rocks, organic and inorganic binders and generators of porosity. Once the curing and hardening has been done it is worth noting that one of the most important aspects of the product is the generation of a complex connected porous system as a result of the incorporation of crushed expanded polystyrene, which is activated after hardening through the application of organic solvents. [es

Percutaneous nephrolithotomy for the treatment of radiolucent renal stones in children: is it different opaque stone treatment?

Science.gov (United States)

Adanur, Şenol; Ziypak, Tevfik; Sancaktutar, Ahmet Ali; Tepeler, Abdülkadir; Reşorlu, Berkan; Söylemez, Haluk; Dağgülli, Mansur; Özbey, İsa; Unsal, Ali

2014-02-01

We aimed to evaluate the effectiveness of percutaneous nephrolithotomy (PNL), stone-free rates, and related complications in children with radiolucent renal stones. A total of 56 patients aged auxillary treatment method was detected as 94.6%. The total complication rate was 19.6% (11 patients). No adjacent organ injury was observed. All of the complications that occurred were minor according to the Clavien classification (Clavien Grades I-II). PNL can be applied to radiolucent pediatric renal stones in children with similar success, and complication rates as noted for radiopaque stones.

Pattern of family history in stone patients.

Science.gov (United States)

Marickar, Y M Fazil; Salim, Abiya; Vijay, Adarsh

2009-12-01

Genetic predisposition to urolithiasis is a much discussed topic. The objective of this paper is to identify the types of family members of proved urinary stone patients, who have a history of urinary stone formation. The study population consisted of 2,157 urinary stone patients interviewed in 2003-2007 in the urinary stone clinic. Family members with stone history were classified as group 1--first order single (one person in the immediate family-father, mother, siblings, or children), group 2--first order multiple (more than one member in the above group), group 3--second order single (one person in the blood relatives in family--grandparents, grandchildren, uncles, aunts, cousins, etc.) and group 4--second order multiple (more than one member in the above group). Of the 2,157 patients studied, 349 patients gave positive history of stone disease constituting 16.18%. Of these, 321 were males and 28 were females. Subdivision of the family members showed that 282 patients (80.80%) had single family member with stones and the rest 67 (19.20%) had multiple family members with history of stone disease. Group 1 which constituted one family member in the immediate family had 255 involvements (father: 88, mother: 16, brother: 135, sister: 2, son: 10, and daughter: 4); Group 2 with multiple members in the immediate family constituted 51 relatives; of these, father and brother combination was the most common with 35 occurrences. Group 3 with one person in the distant relatives in family namely grandparents, grand children, uncles, aunts, cousins, etc. constituted 27 occurrences and Group 4 with more than one member in the distant family constituted 16 occurrences. It is concluded that single family member involvement was more than multiple involvements. Males predominated. Stone occurrence was more in the immediate family members than distant relatives. Brothers formed the most common group to be involved with stone disease. Study of stone risk in the family members should

Feasibility study of prompt gamma neutron activation for NDT measurement of moisture in stone and brick

Energy Technology Data Exchange (ETDEWEB)

Livingston, R. A.; Al-Sheikhly, M. [Materials Science and Engineering Dept., U. of Maryland, College Park MD 20742 (United States); Grissom, C.; Aloiz, E. [Museum Conservation Institute, Smithsonian Institution, Washington DC 20746 (United States); Paul, R. [Chemical Sciences Division, NIST, Gaithersburg MD 20899 (United States)

2014-02-18

The conservation of stone and brick architecture or sculpture often involves damage caused by moisture. The feasibility of a NDT method based on prompt gamma neutron activation (PGNA) for measuring the element hydrogen as an indication of water is being evaluated. This includes systematic characterization of the lithology and physical properties of seven building stones and one brick type used in the buildings of the Smithsonian Institution in Washington, D.C. To determine the required dynamic range of the NDT method, moisture-related properties were measured by standard methods. Cold neutron PGNA was also used to determine chemically bound water (CBW) content. The CBW does not damage porous masonry, but creates an H background that defines the minimum level of detection of damaging moisture. The CBW was on the order of 0.5% for all the stones. This rules out the measurement of hygric processes in all of the stones and hydric processed for the stones with fine scale pore-size distributions The upper bound of moisture content, set by porosity through water immersion, was on the order of 5%. The dynamic range is about 10–20. The H count rates were roughly 1–3 cps. Taking into account differences in neutron energies and fluxes and sample volume between cold PGNA and a portable PGNA instrument, it appears that it is feasible to apply PGNA in the field.

Ionic-Liquid-Based CO2 Capture Systems: Structure, Interaction and Process.

Science.gov (United States)

Zeng, Shaojuan; Zhang, Xiangping; Bai, Lu; Zhang, Xiaochun; Wang, Hui; Wang, Jianji; Bao, Di; Li, Mengdie; Liu, Xinyan; Zhang, Suojiang

2017-07-26

The inherent structure tunability, good affinity with CO 2 , and nonvolatility of ionic liquids (ILs) drive their exploration and exploitation in CO 2 separation field, and has attracted remarkable interest from both industries and academia. The aim of this Review is to give a detailed overview on the recent advances on IL-based materials, including pure ILs, IL-based solvents, and IL-based membranes for CO 2 capture and separation from the viewpoint of molecule to engineering. The effects of anions, cations and functional groups on CO 2 solubility and selectivity of ILs, as well as the studies on degradability of ILs are reviewed, and the recent developments on functionalized ILs, IL-based solvents, and IL-based membranes are also discussed. CO 2 separation mechanism with IL-based solvents and IL-based membranes are explained by combining molecular simulation and experimental characterization. Taking into consideration of the applications and industrialization, the recent achievements and developments on the transport properties of IL fluids and the process design of IL-based processes are highlighted. Finally, the future research challenges and perspectives of the commercialization of CO 2 capture and separation with IL-based materials are posed.

Endolithic phototrophs in built and natural stone.

Science.gov (United States)

Gaylarde, Christine C; Gaylarde, Peter M; Neilan, Brett A

2012-08-01

Lichens, algae and cyanobacteria have been detected growing endolithically in natural rock and in stone buildings in various countries of Australasia, Europe and Latin America. Previously these organisms had mainly been described in natural carbonaceous rocks in aquatic environments, with some reports in siliceous rocks, principally from extremophilic regions. Using various culture and microscopy methods, we have detected endoliths in siliceous stone, both natural and cut, in humid temperate and subtropical climates. Such endolithic growth leads to degradation of the stone structure, not only by mechanical means, but also by metabolites liberated by the cells. Using in vitro culture, transmission, optical and fluorescence microscopy, and confocal laser scanning microscopy, both coccoid and filamentous cyanobacteria and algae, including Cyanidiales, have been identified growing endolithically in the facades of historic buildings built from limestone, sandstone, granite, basalt and soapstone, as well as in some natural rocks. Numerically, the most abundant are small, single-celled, colonial cyanobacteria. These small phototrophs are difficult to detect by standard microscope techniques and some of these species have not been previously reported within stone.

Savannah River Site - Salt-stone Disposal Facility Performance Assessment Update

International Nuclear Information System (INIS)

Newman, J.L.

2009-01-01

The Savannah River Site (SRS) Salt-stone Facility is currently in the midst of a Performance Assessment revision to estimate the effect on human health and the environment of adding new disposal units to the current Salt-stone Disposal Facility (SDF). These disposal units continue the ability to safely process the salt component of the radioactive liquid waste stored in the underground storage tanks at SRS, and is a crucial prerequisite for completion of the overall SRS waste disposition plan. Removal and disposal of low activity salt waste from the SRS liquid waste system is required in order to empty tanks for future tank waste processing and closure operations. The Salt-stone Production Facility (SPF) solidifies a low-activity salt stream into a grout matrix, known as salt-stone, suitable for disposal at the SDF. The ability to dispose of the low-activity salt stream in the SDF required a waste determination pursuant to Section 3116 of the Ronald Reagan National Defense Authorization Act of 2005 and was approved in January 2006. One of the requirements of Section 3116 of the NDAA is to demonstrate compliance with the performance objectives set out in Subpart C of Part 61 of Title 10, Code of Federal Regulations. The PA is the document that is used to ensure ongoing compliance. (authors)

The influence of particle size and AgNO3 concentration in the ionic exchange process on the fungicidal action of antimicrobial glass

International Nuclear Information System (INIS)

Mendes, E.; Piletti, R.; Barichello, T.; Oliveira, C.M.; Kniess, C.T.; Angioletto, E.; Riella, H.G.

2012-01-01

Antimicrobial materials have long been used as an effective means of reducing the risks posed to humans by fungi, bacteria and other microorganisms. These materials are essential in environments where cleanliness, comfort and hygiene are the predominate concerns. This work presents preliminary results for the development of a fungicidal vitreous material that is produced by the incorporation of a silver ionic specimen through ionic exchange reactions. Silver ions were incorporated into powdered glass via ionic exchange in an ionic medium containing silver species with different concentrations of AgNO 3 . The fungicidal efficiency of the samples was studied as a function of the AgNO 3 concentration and the particle size of the glass using the agar diffusion test for the microbiological analysis of the fungus species Candida albicans. The samples were examined by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD). The experimental results showed that the fungicidal effect was dependent on the AgNO 3 concentration in the ionic exchange medium but was not dependent on the particle size of the glass. - Highlights: ► The fungicidal powder glass presents high potential for application as polymeric additive and others application in the medical area. ► The fungicidal effect was dependent on AgNO3 concentration, but was not dependent on the particle size of the glass. ► The XRD results show that the ionic exchange process promotes the formation of silver crystalline phases with cubic cells.

Continuum electrostatics for ionic solutions with non-uniform ionic sizes

International Nuclear Information System (INIS)

Li Bo

2009-01-01

This work concerns electrostatic properties of an ionic solution with multiple ionic species of possibly different ionic sizes. Such properties are described by the minimization of an electrostatic free-energy functional of ionic concentrations. Bounds are obtained for ionic concentrations with low electrostatic free energies. Such bounds are used to show that there exists a unique set of equilibrium ionic concentrations that minimizes the free-energy functional. The equilibrium ionic concentrations are found to depend sorely on the equilibrium electrostatic potential, resembling the classical Boltzmann distributions that relate the equilibrium ionic concentrations to the equilibrium electrostatic potential. Unless all the ionic and solvent molecular sizes are assumed to be the same, explicit formulae of such dependence are, however, not available in general. It is nevertheless proved that in equilibrium the ionic charge density is a decreasing function of the electrostatic potential. This determines a variational principle with a convex functional for the electrostatic potential

UK-Nuclear decommissioning authority and US Salt-stone waste management issues

International Nuclear Information System (INIS)

Lawless, William; Whitton, John

2007-01-01

Available in abstract form only. Full text of publication follows: We update two case studies of stakeholder issues in the UK and US. Earlier versions were reported at Waste Management 2006 and 2007 and at ICEM 2005. UK: The UK nuclear industry has begun to consult stakeholders more widely in recent years. Historically, methods of engagement within the industry have varied, however, recent discussions have generally been carried out with the explicit understanding that engagement with stakeholders will be 'dialogue based' and will 'inform' the final decision made by the decision maker. Engagement is currently being carried out at several levels within the industry; at the national level (via the Nuclear Decommissioning Authority's (NDA) National Stakeholder Group (NSG)); at a local site level (via Site Stakeholder Groups) and at a project level (usually via the Best Practicable Environmental Option process (BPEO)). This paper updates earlier results by the co-author with findings from a second questionnaire issued to the NSG in Phase 2 of the engagement process. An assessment is made regarding the development of stakeholder perceptions since Phase 1 towards the NDA process. US: The US case study reviews the resolution of issues on salt-stone by Department of Energy's (DOE) Savannah River Site (SRS) Citizens Advisory Board (CAB), in Aiken, SC. Recently, SRS-CAB encouraged DOE and South Carolina's regulatory Department of Health and Environmental Control (SC-DHEC) to resolve a conflict preventing SC-DHEC from releasing a draft permit to allow SRS to restart salt-stone operations. It arose with a letter sent from DOE blaming the Governor of South Carolina for delay in restarting salt processing. In reply, the Governor blamed DOE for failing to assure that Salt Waste Processing Facility (SWPF) would be built. SWPF is designed to remove most of the radioactivity from HLW prior to vitrification, the remaining fraction destined for salt-stone. (authors)

Extracorporeal shock-wave lithotripsy of bile duct stones

International Nuclear Information System (INIS)

Lee, Jong Tae; Kim, Myung Joon; Yoo, Hyung Sik; Suh, Jung Ho; Lee, Moo Sang; Jo, Jang Hwan; Kim, Byung Ro

1989-01-01

During the past one and half year, we performed ESWL therapy in 13 patients with common bile duct and intrahepatic duct stones, applying Lithostar-R (Siemens co. West Germany) and analyzed their results. In 13 patients, 9 residual common bile duct stones and 7 intrahepatic duct stones were selected postoperatively. The size of stones were ranged from 0.7 cm to 3.5 cm in diameter. 2 stones were multiple and the remained 14 were single in number. The visualization of stones were done with fluoroscopy after the injection of contrast media via cholangiographic T-tube or ERCP. ESWL were applied continuously until stone disintegration was visible, or upto maximum number of 3500 discharge of shock wave. If not disintegrated upto 3500, patients were underwent second or third lithotripsy session with interval of one week. Our results showed that among 9 common bile duct stones, 4 were completely disintegrated and passed out spontaneously, but 3 partially fragmented and removed by the additional procedure. 2 were failed. Among 7 intrahepatic stones, 3 completely and 2 partially were succeeded. One stone partially fragmented were retained without removal and other one were failed. Skin petechia in all patients were revealed on the entry port of shock wave, but no serous complication was not occurred

Extracorporeal shock-wave lithotripsy of bile duct stones

Energy Technology Data Exchange (ETDEWEB)

Lee, Jong Tae; Kim, Myung Joon; Yoo, Hyung Sik; Suh, Jung Ho; Lee, Moo Sang; Jo, Jang Hwan; Kim, Byung Ro [Yonsei University College of Medicine, Seoul (Korea, Republic of)

1989-12-15

During the past one and half year, we performed ESWL therapy in 13 patients with common bile duct and intrahepatic duct stones, applying Lithostar-R (Siemens co. West Germany) and analyzed their results. In 13 patients, 9 residual common bile duct stones and 7 intrahepatic duct stones were selected postoperatively. The size of stones were ranged from 0.7 cm to 3.5 cm in diameter. 2 stones were multiple and the remained 14 were single in number. The visualization of stones were done with fluoroscopy after the injection of contrast media via cholangiographic T-tube or ERCP. ESWL were applied continuously until stone disintegration was visible, or upto maximum number of 3500 discharge of shock wave. If not disintegrated upto 3500, patients were underwent second or third lithotripsy session with interval of one week. Our results showed that among 9 common bile duct stones, 4 were completely disintegrated and passed out spontaneously, but 3 partially fragmented and removed by the additional procedure. 2 were failed. Among 7 intrahepatic stones, 3 completely and 2 partially were succeeded. One stone partially fragmented were retained without removal and other one were failed. Skin petechia in all patients were revealed on the entry port of shock wave, but no serous complication was not occurred.

Building stones can be of geoheritage significance

Science.gov (United States)

Brocx, Margaret; Semeniuk, Vic

2017-04-01

Building stones have generally been assigned values according to their cultural, aesthetic, and rarity significance, amongst other criteria, but they also may have geoheritage significance. This is akin to the geoheritage significance ascribed to minerals and fossils housed as ex situ specimens in museums. We proffer the notion that building stones can be of geoheritage value particularly where they comprise permanent buildings, they illustrate significant windows into the history of the Earth, and they can be visited as an ex situ museum locality (e.g., the "Blue Granite" of Iceland) for education as part of building-stone tours. For some rocks the quarries that supplied the building stone are no longer in existence and hence the building stones provide the only record of that type of material; for other rocks, the building stone may illustrate features in the lithology no longer present in the quarry itself (e.g., rare and large xenoliths). Building stones are particularly significant as they are often polished and manifest structures, fabrics, and textures not evident in outcrop. We illustrate here examples of building stone of geoheritage significance using Australian and International examples. Australian designated stones could include the "Sydney Sandstone" or "Victorian Bluestone". For international examples, there is the famous "Carrara Marble" in Italy and the widely known "Portland Limestone" from southern England, the latter having been utilized for St Pauls Cathedral in London and the UN building in New York City.

Ureteroscopy and stone lithotripsy with lithoclast: personal experience.

Science.gov (United States)

Leidi, G L; Berti, G L; Canclini, L; Giola, V; Maccaroni, A; Raimoldi, A; Veneroni, L; Bacchioni, A M

1997-06-01

Ureteroscopy has become a common technique in the diagnosis and treatment of ureteral pathologies, but this procedure is quite invasive and some complications have been reported in literature. In our Institute 49 patients underwent ureteroscopy and ballistic lithotripsy with lithoclast for ureteral stones. The stones were localized both in the middle and distal part of the ureter. We used a small caliber 7-8.5 Wolf ureteroscope. The treatments were performed under antibiotic prophylaxis. Direct access to the ureter without dilation of the meatus was obtained in 97.96% of patients. The stones were easily reached in 93.88% of the cases and satisfactory fragmentation was obtained in 90.7%. In 4 patients (9.3%) one or more large stone fragments escaped into the kidney, requiring the patients to be treated with ESWL. No major complications occurred: no ureteral perforations, no important bleeding and no severe or persistent infections. All patients were discharged in one to four days postoperatively. The authors conclude that ureteroscopy using small caliber instruments with Lithoclast is a safe and satisfactory alternative to ESWL in the treatment of ureteral stones.

Technology programs in support of advanced light water reactor plants: Construction

International Nuclear Information System (INIS)

Eichen, E.P.

1989-01-01

Under Contract No. AC03-86SF16565, Stone ampersand Webster Engineering Corporation (SWEC) is conducting several independent, yet interrelated, studies of light water reactor plants to improve constructibility and quality, to reduce costs and schedule durations, and to simplify design. This document discusses design requirements. 36 refs., 57 figs., 56 tabs

Mixed system of ionic liquid and non-ionic surfactants in aqueous media: Surface and thermodynamic properties

International Nuclear Information System (INIS)

Bhatt, Darshak; Maheria, Kalpana; Parikh, Jigisha

2014-01-01

Highlights: • Interaction of ionic liquid and ethylene oxide based non-ionic surfactants in aqueous media. • Evaluation of various surface properties and thermodynamic parameters. • Micellar growth ensues from exothermic to endothermic with increase in temperature. • Micelle formation is enthalpy driven at low temperature and entropy driven at higher temperature. • The micellization power and adsorption proficiency decreased at high IL concentrations. - Abstract: The mixed system of ionic liquid (IL) tetraethyl ammonium tetrafluoroborate [TEA(BF 4 )] and numerous ethylene oxide based non-ionic surfactants in aqueous media were studied using surface tension, viscosity and dynamic light scattering (DLS) measurements. Various surface properties like critical micelle concentration (cmc), maximum surface excess concentration (Γ max ), minimum surface area per surfactant molecule (A min ), surface tension at the cmc (γ cmc ), adsorption efficiency (pC 20 ), and effectiveness of surface tension reduction (π cmc ) as well as thermodynamic parameters of micellization have been determined. DLS and viscosity measurements revealed that the micellar growth was attributed to the bridged solvophilicity of the POE chain in surfactants at elevated temperatures. In most of the cases, the progression ensues from exothermic to endothermic with increase in temperature of the mixed system. Thermodynamic parameter indicates that the micelle formation process is enthalpy driven at low temperature and entropy driven at higher temperature

The twelve colourful stones

International Nuclear Information System (INIS)

Doria, R.M.

1983-01-01

A dynamics with twelve colourful stones is created based on the concepts of gauge and colour. It is associated different gauge fields to the same group. A group of gauge invariant Lagrangians is established. A gauge invariant mass term is introduced. The colourful stones physical insight is to be building blocks for quarks and leptons. (Author) [pt

Evaluating the Rate of Stone Art Deterioration in Wadi Maghara and Wadi Mukattab, Sinai, Egypt

Directory of Open Access Journals (Sweden)

Sayed HEMEDA

2012-06-01

Full Text Available One of the key reasons for the status of Wadi Maghara and Wadi Mukattab as World Heritage Sites is the abundance of stone art present there. Unfortunately, in time, much of the stone art heritage in the two archaeological sites was lost, due to natural stone weathering processes, to static and dynamic actions and lately, due to the lack of preservation measures and to the action of people. That fragile art heritage is non-renewable and, therefore, it requires specialized management. Several stone facades in Wadi Maghara have embossed inscriptions of early rulers of Egypt, that document their expeditions to mine precious minerals, primarily turquoise and copper, that were found in the area. Wadi Mukattab (south of Wadi Maghara is the valley of inscriptions. Over a distance of 3 km along this valley inscriptions can be found on the mountain rocks that have mostly been made by Nabateans (2nd and 3rd Century but also by others, such as pilgrims, soldiers, merchants, throughout the centuries. In our case study, inscriptions from specific study areas were analyzed by using SEM, polarizing microscope, XRD, SEM with EDX, DTA-TGA, Grain Size Distribution, Pore Media Characterization and some stone samples were tested in the stone mechanics laboratory, to determine the physical and mechanical characteristics of the stone with carved inscriptions. Digital photographs were taken, with Geographic Information Systems software. Older images were compared with more recent ones and in order to classify and quantify the amount of deterioration that occurred over time. Various methodologies were applied to classify the images, and it was found that manual digitizing provided the best means for quantifying the amount of deterioration. Results showed that the damage was primarily caused due to the instability of stone structures, because of the extensive jointing and rock fall gravity, due to dynamic actions and the granular disaggregation of the stone surface. The

Piezoelectric extracorporeal lithotripsy of gallbladder stones: New inclusion criteria

Energy Technology Data Exchange (ETDEWEB)

Han, Joon Koo; Choi, Byung Ihn; Shin, Yong Moon; Yoon, Yong Kyu; Yoon, Yong Bum; Park, Yong Hyun; Kim, Chu Wan; Han, Man Chung [Seoul National University College of Medicine, Seoul (Korea, Republic of)

1994-08-15

To establish the optimal inclusion criteria for the patients with gallbladder stones to extracorporeal shock wave lithotripsy(ESWL) by retrospectively analyzed our current results. Data obtained from 201 patients with gallbladder stones treated with ESWL and oral chemolytic agent from November 1988 to July 1992 were retrospectively analyzed. Ninety-six had radiolucent stones and 105 had radiopaque stones. We used piezoelectric lithotriptor(EDAP LT. 01) and there were no limitation in number of sessions or total number of shock waves. ESWL was repeated until the size of the largest fragment is smaller than 4 mm. Follow up ultrasound was done in every three months after the successful fragmentation. Average length of the follow up was 205 days. We analyzed the rate of successful fragmentation, number of shock waves needed to achieve successful fragmentation according to the size, number of stones as well as the presence of the calcification. Stone-free rate after 6 months was also calculated from all subgroups and compared to each other. The rate of successful fragmentation was 76.2% for radiolucent stones and 65.6% for radiopaque stones(p> 0.05) after 46,731 and 56,111 shock wave respectively(p > 0.05) The rate of successful fragmentation was highest in patients with single, radiolucent stone smaller than 2 cm(91.7%) followed by single radiolucent stone larger than 2 cm(83.3%), multiple calcified stones smaller than 2 cm (77.4%) and single calcified stone smaller than 2 cm(72.1%). The rate of complete stone clearance after 6 month follow-up was highest in patients with single radiolucent stone smaller than 2 cm (63.3%) and followed by multiple calcified stones smaller than 2 cm(37.3%), single calcified stone smaller than 2 cm(33.9%)(p < 0.05). To obtain better results with ESWL in patients with gallbladder stone, the authors propose a more strict inclusion criteria, which is the patient with a single, radiolucent stone smaller than 2 cm.

Piezoelectric extracorporeal lithotripsy of gallbladder stones: New inclusion criteria

International Nuclear Information System (INIS)

Han, Joon Koo; Choi, Byung Ihn; Shin, Yong Moon; Yoon, Yong Kyu; Yoon, Yong Bum; Park, Yong Hyun; Kim, Chu Wan; Han, Man Chung

1994-01-01

To establish the optimal inclusion criteria for the patients with gallbladder stones to extracorporeal shock wave lithotripsy(ESWL) by retrospectively analyzed our current results. Data obtained from 201 patients with gallbladder stones treated with ESWL and oral chemolytic agent from November 1988 to July 1992 were retrospectively analyzed. Ninety-six had radiolucent stones and 105 had radiopaque stones. We used piezoelectric lithotriptor(EDAP LT. 01) and there were no limitation in number of sessions or total number of shock waves. ESWL was repeated until the size of the largest fragment is smaller than 4 mm. Follow up ultrasound was done in every three months after the successful fragmentation. Average length of the follow up was 205 days. We analyzed the rate of successful fragmentation, number of shock waves needed to achieve successful fragmentation according to the size, number of stones as well as the presence of the calcification. Stone-free rate after 6 months was also calculated from all subgroups and compared to each other. The rate of successful fragmentation was 76.2% for radiolucent stones and 65.6% for radiopaque stones(p> 0.05) after 46,731 and 56,111 shock wave respectively(p > 0.05) The rate of successful fragmentation was highest in patients with single, radiolucent stone smaller than 2 cm(91.7%) followed by single radiolucent stone larger than 2 cm(83.3%), multiple calcified stones smaller than 2 cm (77.4%) and single calcified stone smaller than 2 cm(72.1%). The rate of complete stone clearance after 6 month follow-up was highest in patients with single radiolucent stone smaller than 2 cm (63.3%) and followed by multiple calcified stones smaller than 2 cm(37.3%), single calcified stone smaller than 2 cm(33.9%)(p < 0.05). To obtain better results with ESWL in patients with gallbladder stone, the authors propose a more strict inclusion criteria, which is the patient with a single, radiolucent stone smaller than 2 cm

Determination of weathering and conservation of sculptured stone by use of the laser method

International Nuclear Information System (INIS)

Aaberg, G.; Stijfhoorn, D.E.

1996-09-01

Weathering and deterioration of sculptured stone and masonry is a natural process which stars at the same moment the stone is quarried and exposed to exogenous conditions. This process of natural decay has, however, been accelerated due to the emission of different man-made pollutants, domestic and industrial, local and global. The ISOLASER project is based on the laser microprobe technique for determining the depth of natural and induced weathering and the effect of conservation measures of cultural objects of carbonaceous sandstone and marble/limestone. The purpose of the project is to determine the depth of weathering and depth of penetration of conservation agents in unweathered calcite-cemented stone and the weathering profile in linseed oil-treated stone after accelerated weathering cycles in a climatic chamber. The analytical results show that even after such a short period as five weeks of exposure the effect of SO 2 , NO 2 and elevated humidity on Gotland sandstone can be easily observed in a change of the δ 13 C values in the outermost 2 mm of the stone. Treating the sample with linseed oil has a preserving effect on the rock and hinders the deteriorating effect of SO 2 and NO 2 . The oil treatment even preserves the signature of previously incorporated organic carbon. Compilation of a questionnaire representing a broad field within natural sciences in cultural heritage research in Europe, shows an overwhelming positive approach to the project as such. The questioned researchers consider the laser method particularly useful as a complementary method in other investigations and states that the method can without doubt give new dimensions to the analysis of important cultural objects. 2 refs., 6 figs

Using a three-dimensional computer assisted stone volume estimates to evaluate extracorporeal shockwave lithotripsy treatment of kidney stones

DEFF Research Database (Denmark)

Bigum, Lene Hyldgaard; Ulriksen, Peter Sommer; Omar, Omar Salah

2016-01-01

Hospital between April 2013 and January 2014 and follow-up was possible in 77 (95 %) patients. NCCT was used before and after treatment. Treatment response was expressed as a reduction of the stone volume. Stone characteristics as the stone volumes, HU, SSD and localization were measured by radiologist...

Combined physical and chemical absorption of carbon dioxide in a mixture of ionic liquids

International Nuclear Information System (INIS)

Pinto, Alicia M.; Rodríguez, Héctor; Arce, Alberto; Soto, Ana

2014-01-01

Highlights: • Carbon dioxide can be absorbed in mixtures of two ionic liquids: [C 2 mim][EtSO 4 ] and [C 2 mim][OAc]. • A combination of physical and chemical absorption mechanisms is observed. • The CO 2 absorption capacity of the mixture of ionic liquids decreases with increasing temperature. • [C 2 mim][EtSO 4 ] in the mixture prevents solidification of the product resulting from reaction of [C 2 mim][OAc] and CO 2 . • Density and viscosity studies of the mixture of ionic liquids also lead to synergies, in particular at low temperatures. - Abstract: Ionic liquids have attracted great interest recently as the basis of a potential alternative technology for the capture of carbon dioxide. Beyond the inherent tunability of properties of individual ionic liquids, a further strategy in optimising the ionic liquid sorbent for this application is the use of mixtures of ‘pure’ ionic liquids. Some ionic liquids absorb CO 2 physically, whereas others do so chemically. Both mechanisms of absorption present advantages and disadvantages for a CO 2 capture process operating in a continuous regime. In this work, a mixture of 1-ethyl-3-methylimidazolium acetate (an ionic liquid that reacts chemically with CO 2 ) and 1-ethyl-3-methylimidazolium ethylsulfate (an ionic liquid that absorbs CO 2 only through a physical mechanism) was investigated for the absorption of CO 2 as a function of temperature and at pressures up to 17 bar. The absorption/desorption studies were complemented by the characterisation of thermal and physical properties of the mixture of ionic liquids, which provide extra information on the interactions at a molecular level, and are also critical for the assessment of its suitability for a proposed process and for the subsequent process design

Stone anchors of India: Findings, classification and significance.

Digital Repository Service at National Institute of Oceanography (India)

Tripati, S.

Various types of stone anchors have been observed during inshore and offshore explorations along the east and west coasts of India. The earliest stone anchors of India have been recorded from the Harappan sites (3rd millennium BC), but their shape...

Recent development of ionic liquid membranes

Directory of Open Access Journals (Sweden)

Junfeng Wang

2016-04-01

Full Text Available The interest in ionic liquids (IL is motivated by its unique properties, such as negligible vapor pressure, thermal stability, wide electrochemical stability window, and tunability of properties. ILs have been highlighted as solvents for liquid–liquid extraction and liquid membrane separation. To further expand its application in separation field, the ionic liquid membranes (ILMs and its separation technology have been proposed and developed rapidly. This paper is to give a comprehensive overview on the recent applications of ILMs for the separation of various compounds, including organic compounds, mixed gases, and metal ions. Firstly, ILMs was classified into supported ionic liquid membranes (SILMs and quasi-solidified ionic liquid membranes (QSILMs according to the immobilization method of ILs. Then, preparation methods of ILMs, membrane stability as well as applications of ILMs in the separation of various mixtures were reviewed. Followed this, transport mechanisms of gaseous mixtures and organic compounds were elucidated in order to better understand the separation process of ILMs. This tutorial review intends to not only offer an overview on the development of ILMs but also provide a guide for ILMs preparations and applications. Keywords: Ionic liquid membrane, Supported ionic liquid membrane, Qusai-solidified ionic liquid membrane, Stability, Application

Catalytic Conversion of Biomass to Fuels and Chemicals Using Ionic Liquids

Energy Technology Data Exchange (ETDEWEB)

Liu, Wei; Zheng, Richard; Brown, Heather; Li, Joanne; Holladay, John; Cooper, Alan; Rao, Tony

2012-04-13

This project provides critical innovations and fundamental understandings that enable development of an economically-viable process for catalytic conversion of biomass (sugar) to 5-hydroxymethylfurfural (HMF). A low-cost ionic liquid (Cyphos 106) is discovered for fast conversion of fructose into HMF under moderate reaction conditions without any catalyst. HMF yield from fructose is almost 100% on the carbon molar basis. Adsorbent materials and adsorption process are invented and demonstrated for separation of 99% pure HMF product and recovery of the ionic liquid from the reaction mixtures. The adsorbent material appears very stable in repeated adsorption/regeneration cycles. Novel membrane-coated adsorbent particles are made and demonstrated to achieve excellent adsorption separation performances at low pressure drops. This is very important for a practical adsorption process because ionic liquids are known of high viscosity. Nearly 100% conversion (or dissolution) of cellulose in the catalytic ionic liquid into small molecules was observed. It is promising to produce HMF, sugars and other fermentable species directly from cellulose feedstock. However, several gaps were identified and could not be resolved in this project. Reaction and separation tests at larger scales are needed to minimize impacts of incidental errors on the mass balance and to show 99.9% ionic liquid recovery. The cellulose reaction tests were troubled with poor reproducibility. Further studies on cellulose conversion in ionic liquids under better controlled conditions are necessary to delineate reaction products, dissolution kinetics, effects of mass and heat transfer in the reactor on conversion, and separation of final reaction mixtures.

Shielding features of quarry stone

International Nuclear Information System (INIS)

Hernandez V, C.; Contreras S, H.; Hernandez A, L.; Baltazar R, A.; Escareno J, E.; Mares E, C. A.; Vega C, H. R.

2010-10-01

Quarry stone lineal attenuation coefficient for gamma-rays has been obtained. In Zacatecas, quarry stone is widely utilized as a decorative item in buildings, however its shielding features against gamma-rays unknown. The aim of this work is to determine the shielding properties of quarry stone against γ-rays using Monte Carlo calculations where a detailed model of a good geometry experimental setup was carried out. In the calculations 10 pieces 10 X 10 cm 2 of different thickness were utilized to evaluate the photons transmission as the quarry stone thickness is increased. It was noticed that transmitted photons decay away as the shield thickness is increased, these results were fitted to an exponential function were the linear attenuation coefficient was estimated. Also, using XCOM code the linear attenuation coefficient from several keV up to 100 MeV was estimated. From the comparison between Monte Carlo results and XCOM calculations a good agreement was found. For 0.662 MeV γ-rays the attenuation coefficient of quarry stone, whose density is 2.413 g-cm -3 , is 0.1798 cm -1 , this mean a X 1/2 = 3.9 cm, X 1/4 = 7.7 cm, X 1/10 = 12.8 cm, and X 1/100 = 25.6 cm. Having the information of quarry stone performance as shielding give the chance to use this material to shield X and γ-ray facilities. (Author)

Extracorporeal shock wave lithotripsy for urinary stones

International Nuclear Information System (INIS)

Shinn, Kyung Sub; Kim, Hyun; Byun, Jae Young; Lee, Myung Hee; Bahk, Yong Whee; Park, Yong Hyun

1988-01-01

Extracorporeal shock wave lithotripsy (ESWL) is a new noninvasive treatment modality for urinary stones, and it sometimes is to necessitate endourologic techniques. ESWL with an Edap lithotripter which uses piezo-electric elements, was performed in 142 cases (130 patients) with urinary stones including 68 in calices, 30 in pelves, and 44 in ureters. Technical factors were 100 storages at 5 to 10 pulse rates/sec and 70-100% adjustable power for about 60 minutes (15-90) for renal stones, and 200 storages at 20 pulse rates/sec and 100% adjustable power for about 60 minutes for ureteral stones in a single treatment under stone localization by 5 MHz ultrasonic sector scanner. All patients were treated at Kangnam St.Mary's Hospital of Catholic University Medical College during the 5 months period from May 1, 1987. Every patient had pre-treatment chest, plain abdomen, intravenous urogram and ultrasonogram studies and post-treatment follow-up abdominal radiograms in 1 to 3 months after ESWL.The overall success rate of ESWL in 142 cases was 94.4%. Eight out of 142 cases were successful. Thus, 134 cases were analysed. Of these, 58 cases (43.3%) received one treatment, 33 cases (24.6%) two treatments, 16 cases (11.9%) three treatments and 27 cases (20.2%) more than four treatments. Renal stones were more successfully treated (98.0%) than ureteral stones (88.1%), and calyceal stones presented the highest success rate (98.5%). The stones as small as 5 to 10 mm in size were easily fragmented and the stones of round of oval shape were more easily pulverized than those of staghorn or amorphous shape. The adjunctive endourlogic techniques such as percutaneous nephrostomy, ureteral catheterization or internal ureteral stenting with a double pigtail catheter were required in 17 cases (11.9%). Complications of ESWL for urolithiasis included hematuria (84.5%), flank pain (8.5%) and fever (5.6%), which were controlled without specific treatment. ESWL using ultrasonic localization was

Extracorporeal shock wave lithotripsy for urinary stones

Energy Technology Data Exchange (ETDEWEB)

Shinn, Kyung Sub; Kim, Hyun; Byun, Jae Young; Lee, Myung Hee; Bahk, Yong Whee; Park, Yong Hyun [Kangnam St. Mary' s Hospital, Catholic University Medical College, Seoul (Korea, Republic of)

1988-06-15

Extracorporeal shock wave lithotripsy (ESWL) is a new noninvasive treatment modality for urinary stones, and it sometimes is to necessitate endourologic techniques. ESWL with an Edap lithotripter which uses piezo-electric elements, was performed in 142 cases (130 patients) with urinary stones including 68 in calices, 30 in pelves, and 44 in ureters. Technical factors were 100 storages at 5 to 10 pulse rates/sec and 70-100% adjustable power for about 60 minutes (15-90) for renal stones, and 200 storages at 20 pulse rates/sec and 100% adjustable power for about 60 minutes for ureteral stones in a single treatment under stone localization by 5 MHz ultrasonic sector scanner. All patients were treated at Kangnam St.Mary's Hospital of Catholic University Medical College during the 5 months period from May 1, 1987. Every patient had pre-treatment chest, plain abdomen, intravenous urogram and ultrasonogram studies and post-treatment follow-up abdominal radiograms in 1 to 3 months after ESWL.The overall success rate of ESWL in 142 cases was 94.4%. Eight out of 142 cases were successful. Thus, 134 cases were analysed. Of these, 58 cases (43.3%) received one treatment, 33 cases (24.6%) two treatments, 16 cases (11.9%) three treatments and 27 cases (20.2%) more than four treatments. Renal stones were more successfully treated (98.0%) than ureteral stones (88.1%), and calyceal stones presented the highest success rate (98.5%). The stones as small as 5 to 10 mm in size were easily fragmented and the stones of round of oval shape were more easily pulverized than those of staghorn or amorphous shape. The adjunctive endourlogic techniques such as percutaneous nephrostomy, ureteral catheterization or internal ureteral stenting with a double pigtail catheter were required in 17 cases (11.9%). Complications of ESWL for urolithiasis included hematuria (84.5%), flank pain (8.5%) and fever (5.6%), which were controlled without specific treatment. ESWL using ultrasonic localization

Ionic flotation of complexing oxyanions. Thermodynamics of uranyl complexation in a sulfuric medium. Definition of selectivity conditions of the process

International Nuclear Information System (INIS)

Bouzat, G.

1987-01-01

Oxyanion ionic flotation process with dodecylamine hydrochloride as collector is studied by investigation of flotation and filtration recovery curves, suspension turbidity, conductimetric measurements, and solubility of ionic species. The process is controlled by chemical reactions of precipitation and by adsorption of surfactant confering hydrophobic or hydrophilic surface properties to the solid phase respectively when one or two monolayers of surfactant are successively adsorbed. Equilibrium constants (in terms of activity) of the uranium (VI) complexation with sulphate oxyanions are calculated through Raman spectroscopic study of uranyl sulphate aqueous solutions. The complexation results in a shift of the symmetrical stretching vibration band of U0 2 to low wavenumbers and an increase of their cross section. The solubility curves of ionic species in the precipitation of uranyl -sulphate complexes by dodecylamine hydrochloride are modelled. The knowledge of solubility products, activity coefficients of the species and critical micellar concentration of the surfactant allow the modelling of flotation recovery curves. Temperature and collector structure modifications are studied in terms of optimization parameters and uranium extraction of mine drainage water is processed. Residual concentration of surfactant is considerably lowered by adsorption on montmorillonite

Predictions of outcomes of renal stones after extracorporeal shock wave lithotripsy from stone characteristics determined by unenhanced helical computed tomography: a multivariate analysis

Energy Technology Data Exchange (ETDEWEB)

Wang, Li-Jen; Wong, Yon-Cheong [Chang Gung University, Department of Diagnostic Radiology, Chang Gung Memorial Hospital, Taipei (Taiwan); Chuang, Cheng-Keng; Chu, Sheng-Hsien; Chen, Chih-Shou; Chiang, Yang-Jen [Chang Gung University, Department of Urology, Chang Gung Memorial Hospital, Taipei (Taiwan); See, Lai-Chu [Chang Gung University, Department of Biostatistics Center, Chang Gung Memorial Hospital, Taipei (Taiwan)

2005-11-01

The aim of our study is to analyze the relationships between the characteristics of renal stones determined by unenhanced helical computed tomography (UHCT) and their outcomes after extracorporeal shock wave lithotripsy (ESWL) as well as to predict ESWL outcomes of renal stones by their UHCT characteristics with the use of multivariate analysis. During a 7-month period, 80 adult patients with renal stones underwent ESWL as well as UHCT both before and 3 months after ESWL. Of the 80 patients, 42 patients were classified as ESWL successes and 38 as ESWL failures based on their post-ESWL UHCT findings. For pre-ESWL UHCT, a stone number of more than 2 (P=0.0236), a maximal stone size of greater than 12 mm (P<0.0001), a stone burden of more than 700 mm{sup 3} (P<0.0001), a maximal stone density of more than 900 HU (P=0.0008) and nonround/oval stones (P=0.0007) were associated with ESWL failure outcomes. Multivariate analysis demonstrated that a stone burden of more than 700 mm{sup 3} (P=0.0003), the presence of nonround/oval stones (P=0.0072) and a maximal stone density of more than 900 HU (P=0.0430) were statistically significant predictors of a failure outcome for ESWL. Thus, the analysis of stone characteristics of renal stones by UHCT is helpful in selecting appropriate patients undergoing ESWL for favorable outcomes and reduces the overall costs of the treatment of renal stones. (orig.)

Analysis of kidney stones by PIXE and RBS techniques

Energy Technology Data Exchange (ETDEWEB)

Alkofai, M M [Physics Dept., Yarmouk University, Irbid, (Jordan); Hallak, A B [Research Institute, King Fahd University of Petroleum and Minerals, Dhahran 31261, (Saudi Arabia)

1995-10-01

Human kidney stones were analyzed by PIXE and RBS techniques using 2 MeV He{sup ++} beam. The stones were found to contain the elements: C, N, O, F, Na, Mg, Si, P, S, Cl, K, Ca, Fe and Br. Results obtained by PIXE agree with the results obtained by RBS within experimental errors. A Mechanism for the formation of the kidney stones is suggested. 3 figs., 1 tab.

Analysis of kidney stones by PIXE and RBS techniques

International Nuclear Information System (INIS)

Alkofai, M.M.; Hallak, A.B.

1995-01-01

Human kidney stones were analyzed by PIXE and RBS techniques using 2 MeV He ++ beam. The stones were found to contain the elements: C, N, O, F, Na, Mg, Si, P, S, Cl, K, Ca, Fe and Br. Results obtained by PIXE agree with the results obtained by RBS within experimental errors. A Mechanism for the formation of the kidney stones is suggested. 3 figs., 1 tab

Factors affecting lower calyceal stone clearance after Extracorporeal ...

African Journals Online (AJOL)

shanker

have been identified [1,3]. These include stone characteristics, the type of lithotripter used, LPC anatomy and body habitus. For iso- lated LPC stones, the pelvicalyceal angle, infundibulum length and width are considered important determinants for stone clearance. The impact of body habitus on stone clearance has so far ...

Emergency management of ureteral stones: Recent advances

Directory of Open Access Journals (Sweden)