Pittsburgh International Airport - Scheduled Passenger Traffic

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Here you can find Pittsburgh International Airport’s Monthly Scheduled Traffic Reports. Each of these reports contain a year-over-year (YOY) analysis of scheduled...

To what extent are EU steel companies susceptible to competitive loss due to climate policy?

International Nuclear Information System (INIS)

Okereke, Chukwumerije; McDaniels, Devin

2012-01-01

In recognition of their competitive vulnerability, a set of special rules have been devised for managing sectors such as iron and steel within the EU ETS. Under these rules, the EU steel sector has received free allocations in excess of their compliance needs to now, and will continue to receive some free allowances up to 2020. However, perceptions of the sector's competitive vulnerability have been largely based on inherently hypothetical analyses which rely heavily on counterfactual scenarios and abatement cost estimates often provided by firms themselves. This paper explores how the three largest steel firms in the EU (AcerlorMittal, Corus, and ThyssenKrupp) have sought to strategically exaggerate their vulnerability to carbon pricing to the effect of an inefficient policy outcome. We conduct a qualitative assessment of two of the key narratives underpinning the competitive vulnerability argument of EU steel companies – lack of abatement opportunities and inability to pass through cost increases – based on interviews, case studies, and publicly available data. We find that these arguments provide only partial and weak justifications for competitive loss and preferential treatment under the EU ETS. The strategy however remains successful due to information asymmetry and the peculiar political economy of EU climate regulation. - Highlights: ► We evaluate carbon leakage and vulnerability claims to climate policy by EU Steel companies. ► We find these claims are exaggerated and form key part of companies' climate political strategy. ► The success of this strategy implicates information asymmetry and the broader political economy of regulation within the EU. ► It has proved successful in helping the sector achieve free emission allocations in the EUETS.

Pittsburgh rainwater analysis by PIXE

Energy Technology Data Exchange (ETDEWEB)

Chan, K C; Cohen, B L; Frohliger, J O; Shabason, L

1976-01-01

Concentrations of thirteen elements in rainwater from the Pittsburgh, Pa., area were analysed by Charged Particle Induced X-ray Emission (PIXE). They were compared to rainwater in a rural area and air particulates in Pittsburgh. Local and non-local contributions are discussed. Washout ratios were calculated and found to be larger for smaller size particles, contrary to general belief. The work demonstrates the convenience of using PIXE.

A Community Profile of Pittsburgh Neighborhoods, 1974

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — These data include four historical datasets that were transcribed from the Community Profiles of Pittsburgh reports, which were published in 1974. The Community...

Industrial Restructuring and Urban Change in the Pittsburgh Region: Developmental, Ecological, and Socioeconomic Trade-offs

Directory of Open Access Journals (Sweden)

William Haller

2005-06-01

Full Text Available This article traces the steel industry's restructuring during the 1980s and its consequences for older industrial regions tied historically to steel production. These regions contained large working-class communities that declined because of deindustrialization and restructuring. This article first examines the transition of the steel industry from its roots in extractive and primary manufacturing to a scrap-recycling industry that minimizes labor and raw material inputs. This transition parallels the structural changes in other industries addressed by political economic perspectives, such as the new international division of labor and globalization of production. The article then focuses on the socioeconomic and structural changes, using the Pittsburgh region as an example, including the employment and land-use consequences of deindustrialization and the relationship between losses in manufacturing employment and increases in persistent joblessness and poverty associated with growth of the urban underclass.

Pittsburgh Internet Service Providers By Block: June 2016

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Displays information about internet coverage in the City of Pittsburgh, as published by the Federal Communications Commission.

Pittsburgh International Airport - March 2018 Scheduled Passenger Traffic

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Attached is Pittsburgh International Airport’s Monthly Scheduled Traffic Report. This report contains a year-over-year (YOY) analysis of scheduled flights and...

Pittsburgh International Airport - April 2018 Scheduled Passenger Traffic

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Attached is Pittsburgh International Airport’s Monthly Scheduled Traffic Report. This report contains a year-over-year (YOY) analysis of scheduled flights and...

Pittsburgh International Airport - January 2018 Scheduled Passenger Traffic

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Attached is Pittsburgh International Airport’s Monthly Scheduled Traffic Report. This report contains a year-over-year (YOY) analysis of scheduled flights and...

Pittsburgh International Airport - February 2018 Scheduled Passenger Traffic

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Attached is Pittsburgh International Airport’s Monthly Scheduled Traffic Report. This report contains a year-over-year (YOY) analysis of scheduled flights and...

Construction experience on PCRV liners at Fort St. Vrain

International Nuclear Information System (INIS)

Cliff, J.O.; Wunderlich, R.G.

1976-01-01

The construction of the steel liners for the Fort St. Vrain prestressed concrete reactor vessel presented many unique problems for which techniques were developed to satisfy the rigid specification requirements. The PCRV cavity liner was fabricated from 1.9cm carbon steel plate. The liners were partially fabricated by Pittsburgh-Des Moines Steel Company at their Pittsburgh manufacturing facility. The liners were then shipped by rail to within approximately five miles of the jobsite and then trucked the remaining distance. The construction techniques, dimensional control, concrete support and testing utilized on the Fort St. Vrain project are presented in detail and demonstrate the flexibility of the PCRV for field construction. (author)

Pittsburgh PLI Violations Report

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Report containing Department of Permits, Licenses, and Inspections violation notices that have been issued by the City after October 15, 2015

Bettis Atomic Power Laboratory. Bettis-Pittsburgh Site environmental summary report

International Nuclear Information System (INIS)

None

2000-01-01

This summary report provides a description of the nature and environmental aspects of work and facilities at the Bettis-Pittsburgh site, an historical perspective of Bettis-Pittsburgh operations that is not provided by the annual reports, and background information pertinent to understanding the environmental aspects of Bettis-Pittsburgh operations

75 FR 56866 - Special Local Regulation; Monongahela River, Pittsburgh, PA

Science.gov (United States)

2010-09-17

... participants of the Pittsburgh Dragon Boat Festival from the hazards imposed by marine traffic. Entry into the... Pittsburgh Dragon Boat Festival from the hazards imposed by marine traffic, and re-scheduling the event is... the Pittsburgh Dragon Boat Festival from the hazards imposed by marine traffic. Discussion of Rule...

What is safety culture and risk-taking like at a large steel manufacturing company?

Science.gov (United States)

Nordlöf, Hasse

2012-01-01

Focus group interviews were conducted at a large steel manufacturing company with 1000 employees, in order to answer the research question: what is the safety culture and risk-taking like at the company, according to employees? Ten focus groups were used for data collection consisting of 6-8 employees each. The participants were operators from production. The interviews lasted 75 min and were digitally recorded and thereafter verbatim transcribed. Descriptive data was also collected from all participants by allowing them to fill out a short questionnaire. The results of this study will be presented at the conference as a poster presentation.

Mass spectrometry at the Pittsburgh conference

International Nuclear Information System (INIS)

Borman, S.

1987-01-01

Each year analytical chemists flock to the Pittsburgh Conference to learn about the latest trends in analytical instrumentation. In this Focus, a number of prominent mass spectroscopists who attended this year's meeting in Atlantic City, NJ, discuss their perceptions of current developments in the field of mass spectrometry (MS). In the June 1 issue of Analytical Chemistry, the authors coverage of the Pittsburgh Conferences continues with a follow-up article on specific developments in hyphenated mass spectrometry - primarily liquid chromatography - MS (LC/MS) and gas chromatography - infrared spectrometry MS (GC/IR/MS)

POLLUTION PREVENTION OPPORTUNITY ASSESSMENT UNITED STATES ARMY CORPS OF ENGINEERS PITTSBURGH ENGINEER WAREHOUSE AND REPAIR STATION AND EMSWORTH LOCKS AND DAMS PITTSBURGH, PENNSYLVANIA

Science.gov (United States)

This report summarizes work conducted at the United States Army Corps of Engineers (USACE) Pittsburgh Engineering Warehouse and Repair Station (PEWARS) and Emsworth Locks and Dams in Pittsburgh, Pennsylvania under the U.S. Environmental Protection Agency's (EPA's) Waste Reduction...

A Heat Vulnerability Index and Adaptation Solutions for Pittsburgh, Pennsylvania.

Science.gov (United States)

Bradford, Kathryn; Abrahams, Leslie; Hegglin, Miriam; Klima, Kelly

2015-10-06

With increasing evidence of global warming, many cities have focused attention on response plans to address their populations' vulnerabilities. Despite expected increased frequency and intensity of heat waves, the health impacts of such events in urban areas can be minimized with careful policy and economic investments. We focus on Pittsburgh, Pennsylvania and ask two questions. First, what are the top factors contributing to heat vulnerability and how do these characteristics manifest geospatially throughout Pittsburgh? Second, assuming the City wishes to deploy additional cooling centers, what placement will optimally address the vulnerability of the at risk populations? We use national census data, ArcGIS geospatial modeling, and statistical analysis to determine a range of heat vulnerability indices and optimal cooling center placement. We find that while different studies use different data and statistical calculations, all methods tested locate additional cooling centers at the confluence of the three rivers (Downtown), the northeast side of Pittsburgh (Shadyside/Highland Park), and the southeast side of Pittsburgh (Squirrel Hill). This suggests that for Pittsburgh, a researcher could apply the same factor analysis procedure to compare data sets for different locations and times; factor analyses for heat vulnerability are more robust than previously thought.

DIFFICULTIES IN WORK SAFETY MANAGEMENT IN A COMPANY PRODUCING STEEL FLAT BARS

Directory of Open Access Journals (Sweden)

Marta Niciejewska

2018-01-01

Full Text Available According to research, metal processing industry has the highest risk of accidents at work, due to the necessity for personal protective equipment use and strict execution of safety rules and procedures. The paper presents the individual characteristics of health and safety management in the company producing steel flat bars. Special attention has been paid to the safety aspect of the use of automated logistical equipment (gantries, automatics that increase the risk of work-related accidents. The results of research on the difficulties resulting from the specifics of production (metallurgical industry has been presented.

Preparing for Local Adaptation: Understanding Flood Risk Perceptions in Pittsburgh

Science.gov (United States)

Klima, K.; Wong-Parodi, G.

2015-12-01

The City of Pittsburgh experiences numerous floods every year. Aging and insufficient infrastructure contribute to flash floods and to over 20 billion gallons of combined sewer overflows annually, contaminating Pittsburgh's streets, basements, and waterways. Climate change is expected to further exacerbate this problem by causing more intense and more frequent extreme precipitation events in Western Pennsylvania. For a stormwater adaptation plan to be implemented effectively, the City will need informed public support. One way to achieve public understanding and support is through effective communication of the risks, benefits, and uncertainties of local flooding hazards and adaptation methods. In order to develop these communications effectively, the city and its partners will need to know what knowledge and attitudes the residents of Pittsburgh already hold about flood risks. Here we seek to (1) identify Pittsburgh residents' knowledge level, risk perception and attitudes towards flooding and storm water management, and (2) pre-test communications meant to inform and empower Pittsburghers about flood risks and adaptation strategies. We conduct a city-wide survey of 10,000 Pittsburgh renters and homeowners from four life situations: high risk, above poverty; high-risk, below poverty; low risk, above poverty; and low-risk, below poverty. Mixed media recruitment strategies (online and paper-based solicitations guided/organized by community organizations) assist in reaching all subpopulations. Preliminary results suggest participants know what stormwater runoff is, but have a weak understanding of how stormwater interacts with natural and built systems. Furthermore, although participants have a good understanding of the difference between green and gray infrastructure, this does not translate into a change in their willingness to pay for green infrastructure adaptation. This suggests additional communications about flood risks and adaptation strategies.

77 FR 34297 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Pittsburgh-Beaver...

Science.gov (United States)

2012-06-11

... Promulgation of Air Quality Implementation Plans; Pennsylvania; Pittsburgh-Beaver Valley Nonattainment Area... Pittsburgh-Beaver Valley fine particulate matter (PM 2.5 ) nonattainment area (hereafter referred to as ``the... designations process. The Pittsburgh Area is comprised of the counties of Beaver, Butler, Washington, and...

Identification of high-risk groups among maintenance workers in a steel company with respect to musculoskeletal symptoms and workload

NARCIS (Netherlands)

Hildebrandt, V.H.; Bongers, P.M.; Dul, J.; Dijk, F.J.H. van; Kemper, H.C.G.

1996-01-01

To determine priorities for ergonomic improvements in five maintenance departments of a steel company, a study was carried out to identify groups with a high prevalence of musculoskeletal problems or a high exposure to unfavourable musculoskeletal workload. All workers were asked to complete a

Pittsburgh, Pennsylvania: Solar in Action (Brochure)

Energy Technology Data Exchange (ETDEWEB)

2011-10-01

This brochure provides an overview of the challenges and successes of Pittsburgh, PA, a 2007 Solar America City awardee, on the path toward becoming a solar-powered community. Accomplishments, case studies, key lessons learned, and local resource information are given.

Pittsburgh American Community Survey 2015, School Enrollment

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — School enrollment data are used to assess the socioeconomic condition of school-age children. Government agencies also require these data for funding allocations...

BikePGH's Pittsburgh Bike Map Geographic Data

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Files include data for bike lanes, protected bike lanes, trails, bike routes, shared lane markings, cautionary bike routes, and bridge data from the BikePGH...

The Industrial Photography and the Steel Company Archive of Puerto de Sagunto: Representation, Power and Identity (1944-1976

Directory of Open Access Journals (Sweden)

Esteban Torres

2015-01-01

Full Text Available This article makes a contribution on photo - documentary archives in the steel industry as a source of knowledge and sociological tool. It deals with the case of documentary photo archive Altos Hornos de Vizcaya and Altos Hornos del Mediterráneo in Sagunto (Puerto between 1944 and 1976. The article discusses the need to analyze the role of company photographers and his role as "rapporteurs" of labor and social discourse of the company. We analyze the photographic archive as "artifact of power" with a narrative structure and autonomous with functionality within the industrial process related to the generation of a structure of symbolic and identity discourses.

Two models of inventory control with supplier selection in case of multiple sourcing: a case of Isfahan Steel Company

Science.gov (United States)

Rabieh, Masood; Soukhakian, Mohammad Ali; Mosleh Shirazi, Ali Naghi

2016-06-01

Selecting the best suppliers is crucial for a company's success. Since competition is a determining factor nowadays, reducing cost and increasing quality of products are two key criteria for appropriate supplier selection. In the study, first the inventories of agglomeration plant of Isfahan Steel Company were categorized through VED and ABC methods. Then the models to supply two important kinds of raw materials (inventories) were developed, considering the following items: (1) the optimal consumption composite of the materials, (2) the total cost of logistics, (3) each supplier's terms and conditions, (4) the buyer's limitations and (5) the consumption behavior of the buyers. Among diverse developed and tested models—using the company's actual data within three pervious years—the two new innovative models of mixed-integer non-linear programming type were found to be most suitable. The results of solving two models by lingo software (based on company's data in this particular case) were equaled. Comparing the results of the new models to the actual performance of the company revealed 10.9 and 7.1 % reduction in total procurement costs of the company in two consecutive years.

Fracture Toughness and Strength in a New Class of Bainitic Chromium-Tungsten Steels

Energy Technology Data Exchange (ETDEWEB)

Mao, S. X.; Sikka, V. K.

2006-06-01

This project dealt with developing an understanding of the toughening and stengthening mechanisms for a new class of Fe-3Cr-W(V) steels developed at Oak Ridge National Laboratory (ORNL) in collaboration with Nooter Corporation and other industrial partners. The new steele had 50% higher tensile strength up to 650 degrees Celsius than currently used steels and the potential for not requiring any postweld heat treatment (PWHT) and for reducing equipment weight by 25%. This project was closely related to the Nooter project described in the report Development of a New Class of Fe-3Cr-W(V) Ferritic steels for Industrial Process Applications (ORNL/TM-2005/82). The project was carried out jointly by the University of Pittsburgh and ORNL. The University of Pittsburgh carried out fracture toughness measurements and microstructural analysis on base metal and welded plates prepared at ORNL. The project focused on three areas. The first dealt with detailed microstructural analysis of base compositions of 3Cr-3WV and 3Cr-3WBV(Ta) in both normalized (N) and normalized and tempered (NT) conditions. The second aspect of the prject dealt with determining tensile properties and fracture toughness values of K{subIC} at room temperature for both 3Cr-3Wv and 3Cr-3WV(Ta) compositions. The third focus of the project was to measure the fracture toughness values of the base metal and the heat-affectged zone (HAZ) of a plate of Fe-3Cr-W(Mo)V steel plate welded by the gas tungsten are (GTA) process. The HAZ toughness was measured in both the as-welded and the PWHT condition.

Study of Determinants of Lung Cancer Protective Behaviors in Esfahan Steel Company Workers Based On Protection Motivation Theory

OpenAIRE

mohammadali Morowatisharifabad; Leila Hadi varnamkhavasti; Mohammadjavad Zare; Hossein Fallahzadeh; zohre Karimiankakolaki

2017-01-01

Introduction: Lung cancer is known the leading cause of death among cancers. Since in our country a comprehensive scientific information not available on the determinants of protective behavior of lung cancer among workers, this study, aimed to examine determinants of lung cancer protective behaviors among Esfahan Steel Company (ESCO) workers based on protection motivation theory. Methods: This cross-sectional study was performed on 253 workers of the ESCO who were randomly selected. In th...

Pittsburgh American Community Survey Data 2015 - Household Types

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — The data on relationship to householder were derived from answers to Question 2 in the 2015 American Community Survey (ACS), which was asked of all people in...

EnviroAtlas - Pittsburgh, PA - Ecosystem Services by Block Group

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset presents environmental benefits of the urban forest in 1,089 block groups in Pittsburgh, Pennsylvania. Carbon attributes, temperature...

75 FR 9867 - University of Pittsburgh, et al

Science.gov (United States)

2010-03-04

... DEPARTMENT OF COMMERCE International Trade Administration University of Pittsburgh, et al.; Notice of Consolidated Decision on Applications for Duty-Free Entry of Electron Microscopes This is a decision consolidated pursuant to Section 6(c) of the Educational, Scientific, and Cultural Materials...

77 FR 62147 - Approval and Promulgation of Air Quality Implementation Plans; Pennsylvania; Pittsburgh-Beaver...

Science.gov (United States)

2012-10-12

... Promulgation of Air Quality Implementation Plans; Pennsylvania; Pittsburgh-Beaver Valley Nonattainment Area... (EPA). ACTION: Final rule. SUMMARY: EPA is making two determinations regarding the Pittsburgh- Beaver... 12.7 Collocated Armstrong 42-005-0001 Kittaning......... 11.0 13.2 12.1 12.1 Incomplete \\2\\ Beaver 42...

A Goal Programming Optimization Model for The Allocation of Liquid Steel Production

Science.gov (United States)

Hapsari, S. N.; Rosyidi, C. N.

2018-03-01

This research was conducted in one of the largest steel companies in Indonesia which has several production units and produces a wide range of steel products. One of the important products in the company is billet steel. The company has four Electric Arc Furnace (EAF) which produces liquid steel which must be procesed further to be billet steel. The billet steel plant needs to make their production process more efficient to increase the productvity. The management has four goals to be achieved and hence the optimal allocation of the liquid steel production is needed to achieve those goals. In this paper, a goal programming optimization model is developed to determine optimal allocation of liquid steel production in each EAF, to satisfy demand in 3 periods and the company goals, namely maximizing the volume of production, minimizing the cost of raw materials, minimizing maintenance costs, maximizing sales revenues, and maximizing production capacity. From the results of optimization, only maximizing production capacity goal can not achieve the target. However, the model developed in this papare can optimally allocate liquid steel so the allocation of production does not exceed the maximum capacity of the machine work hours and maximum production capacity.

Real Option in Capital Budgeting for SMEs: Insight from Steel Company

Science.gov (United States)

Muharam, F. M.; Tarrazon, M. A.

2017-06-01

Complex components of investment projects can only be analysed accurately if flexibility and comprehensive consideration of uncertainty are incorporated into valuation. Discounted cash flow (DCF) analysis has failed to cope with strategic future alternatives that affect the right value of investment projects. Real option valuation (ROV) proves to be the right tool for this purpose since it enables to calculate the enlarged or strategic Net Present Value (ENPV). This study attempts to provide an insight of the usage of ROV in capital budgeting and investment decision-making processes of SMEs. Exploring into the first stage processing of steel industry, analysis of alternatives to cancel, to expand, to defer or to abandon is performed. Completed with multiple options interaction and a sensitivity analysis, our findings prove that the application of ROV is beneficial for complex investment projects independently from the size of the company and particularly suitable in scenarios with scarce resources. The application of Real Option Valuation (ROV) is plausible and beneficial for SMEs to be incorporated in the strategic decision making process.

Preparing for local adaptation: Understanding flood risk perceptions in Pittsburgh

Science.gov (United States)

Wong-Parodi, G.; Klima, K.

2016-12-01

In cities such as Pittsburgh, aging and insufficient infrastructure contributes to flashfloods and numerous combined sewer overflows annually, contaminating streets, basements and waterways. Climate change is expected to further exacerbate this problem by causing more intense and more frequent extreme events in Western Pennsylvania. For a storm water adaptation plan to be implemented successfully, the City of Pittsburgh will need informed public support. One way to achieve public understanding and support is through effective communication of the risks, benefits, and uncertainties of local flooding hazards and adaptation methods. In order to develop risk communications effectively, the City and its partners will need to know what knowledge and attitudes the residents of Pittsburgh already hold about flood risks. To that end we surveyed 1,376 Pittsburgh residents on a variety of flood risk topics through an online or paper survey in Fall 2015. On balance, residents were relatively knowledgeable about storm water and see the City's current infrastructure as being inadequate to meet future risk. Moreover, they see the risk of runoff events as increasing and especially among those who live in hazardous flood areas. Residents expressed interest in having a dedicated fund to deal with runoff events. Among those queried about their willingness-to-pay, those asked to pay $15 were most interested in a dedicated fund and for green infrastructure (as opposed to gray infrastructure) in particular. Finally, while most residents favored green infrastructure in terms of its attractiveness and perceived affects on mitigating climate change many did not see it as effective at addressing flooding as gray infrastructure. We found people understand the risk and are open to doing something about it. However, more guidance and information on appropriate ways to adapt locally in terms that make sense to residents could enhance informed support for adaptation measures.

Pennsylvania company prepares year-end review

International Nuclear Information System (INIS)

Anon.

1990-01-01

Equitable Resources, Inc., in Pittsburgh, Pennsylvania, reports that consolidated income for calendar year 1989 was $50.9 million, or $2.43 per share, up from 1988's $47.1 million, or $2.27 per share. The difference was primarily due to a general increase in retail rates which became effective in January 1989 for distribution customers in the state. A December 1989 settlement of a pipeline subsidiary's rate increase also added to the increase. The rate increase had been in effect since 1986, but the full effect had been reserved pending the outcome of regulatory proceedings, the company stated

Perspectives on Art Therapy: The Proceedings of the Pittsburgh Conference on Art Therapy (2nd, Pittsburgh, Pennsylvania, May 20, 1977).

Science.gov (United States)

Roth, Ellen A., Ed.; Rubin, Judith A., Ed.

The proceedings of the 2nd annual Pittsburgh Conference on Art Therapy (with handicapped persons) consists of 44 items including full length papers, summaries of previously published papers, descriptions of workshops, and a limited number of abstracts (submitted by those who chose not to present a paper or workshop description). The papers are…

Stainless steel fabrications: past and present

International Nuclear Information System (INIS)

Daniels, R.

1986-01-01

The paper deals with stainless steel fabrications of Fairey Engineering Company for the nuclear industry. The manufacture of stainless steel containers for Magnox and Advanced Gas Cooled Reactors, flexible fabrication facility, and welding development, are all briefly described. (U.K.)

Development of High Heat Input Welding High Strength Steel Plate for Oil Storage Tank in Xinyu Steel Company

Science.gov (United States)

Zhao, Hemin; Dong, Fujun; Liu, Xiaolin; Xiong, Xiong

This essay introduces the developed high-heat input welding quenched and tempered pressure vessel steel 12MnNiVR for oil storage tank by Xinyu Steel, which passed the review by the Boiler and Pressure Vessel Standards Technical Committee in 2009. The review comments that compared to the domestic and foreign similar steel standard, the key technical index of enterprise standard were in advanced level. After the heat input of 100kJ/cm electro-gas welding, welded points were still with excellent low temperature toughness at -20°C. The steel plate may be constructed for oil storage tank, which has been permitted by thickness range from 10 to 40mm, and design temperature among -20°C-100°C. It studied microstructure genetic effects mechanical properties of the steel. Many production practices indicated that the mechanical properties of products and the steel by stress relief heat treatment of steel were excellent, with pretreatment of hot metal, converter refining, external refining, protective casting, TMCP and heat treatment process measurements. The stability of performance and matured technology of Xinyu Steel support the products could completely service the demand of steel constructed for 10-15 million cubic meters large oil storage tank.

Martin Luther King, Jr. East Busway in Pittsburgh, PA

Science.gov (United States)

1987-10-01

The Port Authority of Allegheny County (PAT), the primary public transit operator in Pittsburgh, PA, built an exclusive roadway for buses which opened for service in February 1983. The two-lane, 6.8-mile facility serves the eastern suburbs via a righ...

EnviroAtlas - Pittsburgh, PA - BenMAP Results by Block Group

Data.gov (United States)

U.S. Environmental Protection Agency — This EnviroAtlas dataset demonstrates the effect of changes in pollution concentration on local populations in 1,089 block groups in Pittsburgh, PA. The US EPA's...

An Empirical Study on Marketing Prospecs and Potential of Steel Industry in India

OpenAIRE

Bagla, Varun

2008-01-01

In this dissertation, a sectoral review of the steel industry in India was taken into consideration. The emphasis was laid down in finding out to know the competitive advantages, which the large Indian Steel Companies have created overtime and their adaptation to the changing environment. I also analyzed the marketing potential and prospects of the steel industry in India. This study focuses on the two major companies in the steel sector in India, namely Steel authority of India ltd (SAIL) ...

78 FR 65272 - Circular Welded Carbon Steel Pipes and Tubes From Thailand: Final Results of Antidumping Duty...

Science.gov (United States)

2013-10-31

..., Saha Thai Steel Pipe (Public) Company, Ltd. (Saha Thai), and Pacific Pipe Company Limited (Pacific Pipe... Pipe (Public) Company, Ltd 0.00 Pacific Pipe Company Limited * * No shipments or sales subject to this... parties to comment on the Preliminary Results. Saha Thai, Wheatland Tube Company, and United States Steel...

EFFECTIVE CONTROL SYSTEM OF THE INTEGRATED INDUSTRIAL COMPANY

Directory of Open Access Journals (Sweden)

K. A. Dyundik

2015-01-01

Full Text Available In article the organizational and administrative structure of the integrated metallurgical company is investigated. It is shown that linearly – a staff control system to become a limiting factor in its development. Management of transformations represents purposeful translation process of the integrated metallurgical company in a new qualitative state. The purpose . The subject of the article is to analyze the organization of management, to improve it on the basis of a new conceptual approach to the modernization of the control system integrated steel companies and the allocation of the subsystems.Methodology. The methodological basis of this article are the comparative analysis methods.The Results. Studied approaches to the development of integrated management of the metallurgical company, the possibility of change.Conclusions / signifi cance. Management development in an integrated steel company requires in-depth study of existing internal operating conditions and specifi cs of the company, as well as the planning and implementation of measures to improve its receptivity to innovation.

Redemption of asthma pharmaceuticals among stainless steel and mild steel welders

DEFF Research Database (Denmark)

Kristiansen, Pernille; Jørgensen, Kristian Tore; Hansen, Johnni

2015-01-01

PURPOSE: The purpose was to examine bronchial asthma according to cumulative exposure to fume particulates conferred by stainless steel and mild steel welding through a proxy of redeemed prescribed asthma pharmaceuticals. METHODS: A Danish national company-based historical cohort of 5,303 male ever...... was estimated by combining questionnaire data on welding work with a welding exposure matrix. The estimated exposure accounted for calendar time, welding intermittence, type of steel, welding methods, local exhaustion and welding in confined spaces. Hazard ratios (HRs) with 95 % confidence intervals (CIs) were...... nonsignificant increased rate of redemption of asthma medicine was observed among high-level exposed stainless steel welders in comparison with low-level exposed welders (HR 1.54, 95 % CI 0.76-3.13). This risk increase was driven by an increase risk among non-smoking stainless steel welders (HR 1.46, 95 % CI 1...

Selected properties of new „duplex” cast steel

Directory of Open Access Journals (Sweden)

S. Pietrowski

2011-10-01

Full Text Available In this paper selected properties of new „duplex” cast steel are presented. The new cast steel was devised in HYDRO-VACUUM company in Grudziądz, where “duplex” cast steel for pump elements is smelted. The goal was to devise a new grade of “duplex” cast steel of better physicochemical properties and cheaper than now applied. It was demonstrated, that there is the possibility of devising the new grade of “duplex” cast steel. It is characterized by higher mechanical properties, similar wear resistance and greater corrosion resistance in 15% water solution of H2SO4 in comparison to now applied “duplex” cast steel. The chemical composition was selected to obtain in microstructure about of 50% ferrite and 50% austenite. It guarantee the highest properties and the lowest costs of its smelting.In the paper results of: the microstructure, Rm, Rp0,2, A5, HB, wear resistance and corrosion resistance in water solution of 15% HCl and H2SO4 acids of new cast steel was presented. They were compared with now applied in HYDRO-VACUUM company “duplex” cast steel.

Pittsburgh American Community Survey Census Data 2014 - Sex by Occupation

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Occupation describes the kind of work a person does on the job. Occupation data were derived from answers to questions 45 and 46 in the 2015 American Community...

Tiger Team Assessment of the Pittsburgh Energy Technology Center, [August 19--September 13, 1991

International Nuclear Information System (INIS)

1991-09-01

This report documents the results of the Department of Energy (DOE) Tiger Team Assessment conducted at Pittsburgh Energy Technology Center (PETC) near Pittsburgh, Pennsylvania, between August 19 and September 13, 1991. A team comprised of professionals from the Department, its contractors, and consultants conducted the assessment. The purpose of the assessment was to provide the Secretary of Energy the status of environment, safety, and health (ES ampersand H) programs at PETC. A management assessment was performed

Current status of stainless steel industry and development of stainless steel

International Nuclear Information System (INIS)

Lee, Yong Deuk; Lee, Chan Soo; Kim Kwang Tae

2000-01-01

Stainless steel is not only clean and smooth in its surface, but also it is superior in quality in terms of corrosion resistance and strength. So that, it is widely in use in the field of construction, chemical installations, and other industries. Growth of stainless steel industry started since the steel technology was developed for mass production in 1960s. Since then stainless steel industry grew rapidly on account of diversified development in this field and growth rate went up to 5.8% per year comparable to 2.3% of steel growth. The rapid growth is attributed to significant industry developments in Europe and Japan in the years of 1970s and 1980s. In addition to these the expansion of stainless steel industry in Korea and Taiwan. Presently Korea produces about 120,000 tons of stainless steel and occupies about 8% of international market. This means Korea become the second largest single country in world in stainless steel production. Moreover Korea is to reinforce its domestic production line by affiliating production companies, increasing of production capability, and specializing in types of stainless steel. This paper is to describe activity of material development, and types of stainless steel for industry use. (Hong, J. S.)

Analysis of the frequency of items in environmental disclosure instruments voluntary and compulsory: a case study in the steel industry segment companies registered in BOVESPA between the period 2008 - 2012

Directory of Open Access Journals (Sweden)

Heitor Dias Melo

2016-04-01

Full Text Available On the requirements with respect to environmental and sustainable processes, organizations are adopting market strategies, preventive measures to inhibit impact on operational development. In this regard, it should be noted that accounting can assist in recording and environmental disclosure in order to demonstrate the evolution of capacity in equity and its relationship with the environment. Therefore, this study has the general objective to analyze the frequency of disclosure of environmental items of companies in the Steel segment, listed on the BOVESPA, in the period 2008 to 2012, the main source of the Standardized Financial Statements (DFP'S and Volunteer Character statements. Thus, it is a qualitative and quantitative research, in which information was used for purposes of identifying the disclosure of each organization in relation to environmental issues that occurred in the area of steel. Through the analysis of data obtained for research development it was possible to analyze the frequency of terms used in environmental items, in which the term "Environmental Management Project" presented more often. As for the results obtained indicated a trend for companies to highlight investments in favor of the environment through environmental asset in the Sustainability Report. Finally, with respect to environmental liability and environmental costs and expenses submitted by companies are justified by the operation of steel, however, they need to have a more efficient control.

The Relationship between Informal Learning, Burn out, Mental Health and Job Satisfaction among Workers of Esfahan Steel Company

Directory of Open Access Journals (Sweden)

mohammad ali nadi

2014-01-01

Full Text Available The purpose of this research is to investigate the relationship between informal learning, job satisfaction, burn out and mental health among workers of Esfahan Steel Company. The research approach is typically descriptive and causal - solidarity and for data analysis and syntheses, descriptive statistics solution have been used including mean value, standard deviation and frequency percentages and the inferential statistics solutions included multiple correlation coefficient , Pearson correlation , multivariate analysis of variance and path analysis . In this study, the correlation between informal learning and job satisfaction and the correlation between burn out and job satisfaction level have been found significant at P 0.01. The correlation coefficient between burn out and mental health as well as mental health and job satisfaction have not been found as significant . Findings imply that burnout and informal learning can predict job satisfaction . Norelation ship has been observed between informal learning and burn out and between informal learning and mental health, while the relationships between informal learning and job satisfaction and between burn out and job satisfaction have been confirmed. The conceptual model of research has been evaluated using path analysis and Confirmatory Factor Analysis . Findings denote the direct effect of informal learning on job satisfaction and indirect effect of burn out on job satisfaction . Referring to the Structural Equation Modeling, among three main paths, the effect of informal learning and burn out on job satisfaction has been observed and it has been found that mental health has no effect on job satisfaction. Major limitation of this research is related to generalization of findings to other steel manufacturing companies, industries and public organizations.

AHP approach for supplier evaluation and selection in a steel manufacturing company

Directory of Open Access Journals (Sweden)

Farzad Tahriri

2008-12-01

Full Text Available Supplier selection is one of the most critical activities of purchasing management in supply chain. Supplier selection is a complex problem involving qualitative and quantitative multi-criteria. A trade-off between these tangible and intangible factors is essential in selecting the best supplier. The work incorporates AHP in choosing the best suppliers. The results suggest that AHP process makes it possible to introduce the optimum order quantities among the selected suppliers so that the Total Value of Purchasing (TVP becomes maximum. In this work, an AHP-based supplier selection model is formulated and then applied to a real case study for a steel manufacturing company in Malaysia. The use of the proposed model indicates that it can be applied to improve and assist decision making to resolve the supplier selection problem in choosing the optimal supplier combination. The work represents the systematic identification of the important criteria for supplier selection process. In addition, the results exhibit the application of development of a multi-criteria decision model for evaluation and selection of suppliers with proposed AHP model, which by scoring the performance of suppliers is able to reduce the time taken to select a vendor.

The upper pennsylvanian pittsburgh coal bed: Resources and mine models

Science.gov (United States)

Watson, W.D.; Ruppert, L.F.; Tewalt, S.J.; Bragg, L.J.

2001-01-01

The U.S. Geological Survey recently completed a digital coal resource assessment model of the Upper Pennsylvanian Pittsburgh coal bed, which indicates that after subtracting minedout coal, 16 billion short tons (14 billion tonnes) remain of the original 34 billion short tons (31 billion tonnes) of coal. When technical, environmental, and social restrictions are applied to the remaining Pittsburgh coal model, only 12 billion short tons (11 billion tonnes) are available for mining. Our assessment models estimate that up to 0.61 billion short tons (0.55 billion tonnes), 2.7 billion short tons (2.4 billion tonnes), and 8.5 billion short tons (7.7 billion tonnes) could be available for surface mining, continuous mining, and longwall mining, respectively. This analysis is an example of a second-generation regional coal availability study designed to model recoverability characteristics for all the major coal beds in the United States. ?? 2001 International Association for Mathematical Geology.

Structural validity of the Pittsburgh Sleep Quality Index in Chinese undergraduate students: A confirmatory factor analysis

OpenAIRE

Suran Guo; chang liu; wenmei sun; siwei wu

2016-01-01

The purpose of this study was to examine the structural validity of the Pittsburgh Sleep Quality Index (PSQI) in Chinese undergraduate students. A cross-sectional questionnaire survey with 631 Chinese undergraduate students was conducted, and the questionnaire package included a measure of demographic characteristics, Pittsburgh Sleep Quality Index (PSQI), Chinese editions of Center for Epidemiologic Studies-Depression, State- Trait Anxiety Inventory, Rumination Response Scale, and Perceived ...

EnviroAtlas - Pittsburgh, PA - Meter-Scale Urban Land Cover (MULC) Data (2010)

Data.gov (United States)

U.S. Environmental Protection Agency — The EnviroAtlas Pittsburgh, PA Meter-Scale Urban Land Cover (MULC) data was generated from United States Department of Agriculture (USDA) National Agricultural...

Environmental Survey preliminary report, Pittsburgh Energy Technology Center, Pittsburgh, Pennsylvania

Energy Technology Data Exchange (ETDEWEB)

1988-09-01

This report presents the preliminary findings from the first phase of the Environmental Survey of the US Department of Energy (DOE) Pittsburgh Energy Technology Center (PETC) conducted December 7--11, 1987. The Survey is being conducted by an interdisciplinary team of environmental specialists, led and managed by the Office of Environment, Safety and Health's Office of Environmental Audit. Individual team specialists are outside experts being supplied by a private contractor. The objective of the Survey is to identify environmental problems and areas of environmental risk associated with PETC. The Survey covers all environmental media and all areas of environmental regulation. It is being performed in accordance with the DOE Environmental Survey Manual. This phase of the Survey involves the review of existing site environmental data, observations of the operations carried on at PETC, and interviews with site personnel. The Survey team developed a Sampling and Analysis (S A) Plan to assist in further assessing certain environmental problems identified during its on-site Survey activities at PETC. The S A Plan will be executed by the Oak Ridge National Laboratory (ORNL). When completed, the Plan's results will be incorporated into the PETC Survey findings for inclusion into the Environmental Survey Summary Report. 64 refs., 23 figs., 29 tabs.

Steel and biodiversity: a promising alliance

Science.gov (United States)

Peters, Klaus; Colla, Valentina; Moonen, Anna Camilla; Branca, Teresa Annunziata; Moretto, Deny Del; Ragaglini, Giorgio; Delmiro, Vanesa Maria Menendez; Romaniello, Lea; Carler, Sophie; Hodges, Jennifer; Bullock, Matthew; Malfa, Enrico

2018-06-01

The term "Biodiversity" derives from a contraction of "biological diversity" and commonly refers to a measure of the variety of organisms, which are present in different ecosystems, by considering genetic variation, ecosystem variation, or species variation within an area, biome, or planet. Biodiversity is receiving an ever-increasing attention at many levels of European society as well as from many industrial sectors, and a variety of actions are being put in place in order to protect, preserve and increase it. The present paper provides examples of the capabilities and potentials of the steel sector with respect to biodiversity. In effect, steel is a valuable and fundamental structural material in order to develop measures and systems for protection of biodiversity. On the other hand, biodiversity can represent for the steel industry not only a heritage to preserve, but, through its functional traits, it can become an opportunity, offering an ecosystem's perspective to all industrial companies. In the paper, steel relevant topics and applications are analyzed leading to the conclusion that biodiversity should be exploited and can play a role with potentially relevant benefits both for the company and for local communities. Sustainability and Ecodesign of processes, products and services

The Effect of Safety Costs on Productivity and Quality: A Case Study of Five Steel Companies in Ahvaz

Directory of Open Access Journals (Sweden)

Gholamabbas Shirali

2016-10-01

Full Text Available Background The implementation of a safety program is one of the most effective factors in increasing productivity. A look to safety from the perspective of efficiency can indicate necessary investment in safety for all, especially the managers of companies. Objectives The aim of this study was to evaluate the effect of safety costs on some indicators of productivity and quality in industrial companies. Methods This study was a retrospective analysis and was implemented in five steel companies in Ahvaz. The data relating to the safety costs such as staffing costs and total safety costs, and productivity and quality indicators were collected in five years. This information and data were collected according to statistics from documents and archives of safety, accounting, and production sectors of companies. Costs as well as numbers and figures of variables were expressed in the form of per capita and percentage to make the data comparable. Linear and generalized regression models and Wald Chi-Square test were used by the SPSS 22 software to determine the relationships between them. Results Safety costs such as capita labor safety costs and capita total safety costs or percentage safety labor costs to labor costs, showed a significant positive effect on labor productivity, labor competitiveness, total factor productivity, quality index and production rates (in some cases, P = 0.001. Conclusions The total safety cost and safety labor compensation generally, regardless of the nature and quality of the safety management system, can impact productivity, quality and quantity of production in addition to other factors of production. Surely if safety programs are targeted and codified, the effect of the investment will be doubled.

Results of the radiological survey of the Excelsior Steel Ball Company, Tonawanda, New York (TNY005)

International Nuclear Information System (INIS)

McKenzie, S.P.; Brown, K.S.

1998-07-01

At the request of the US Department of Energy (DOE), a team from Oak Ridge National Laboratory conducted two radiological surveys of property belonging to the Excelsior Steel Ball Company, which is surrounded on three sides by the former site of the Linde Uranium Refinery, Tonawanda, New York. The surveys were performed in September 1997 and February 1998. The purpose of the first survey was to determine if radioactive residuals were present from previous activities at the former Linde site. The Linde Air Products Division of Union Carbide Corporation, Tonawanda, New York, had used radioactive materials at that location for work performed under government contract from 1942 through 1948. The purpose of the second survey was to collect additional biased samples from an area of the site where biased sample results showed slightly elevated levels of thorium-232

Pittsburgh compound B imaging and cerebrospinal fluid amyloid-β in a multicentre European memory clinic study

DEFF Research Database (Denmark)

Leuzy, Antoine; Chiotis, Konstantinos; Hasselbalch, Steen G

2016-01-01

subjects with normal cognition and patients with mild cognitive impairment, Alzheimer's disease dementia, frontotemporal dementia, and vascular dementia. All had Pittsburgh compound B positron emission tomography data, cerebrospinal fluid INNOTEST amyloid-β42 values, and cerebrospinal fluid samples...... uptake value ratio results were scaled using the Centiloid method. Concordance between Meso Scale Discovery/mass spectrometry reference measurement procedure findings and Pittsburgh compound B was high in subjects with mild cognitive impairment and Alzheimer's disease, while more variable results were...

Water resources of the Pittsburgh area, Pennsylvania

Science.gov (United States)

Noecker, Max; Greenman, D.W.; Beamer, N.H.

1954-01-01

The per capita use of water in the Pittsburgh area in 1951 was 2, 000 gallons per day fgpd) or twice the per capita use in Pennsylvania as a whole. An average of about 3, 040 million gallons of water was withdrawn from the streams and from the ground each day. Of this amount, nearly 190 million gallons per day (mgd), or 6 percent, was for domestic public water supply. Industry, including public utilities generating steam for electric energy, used approximately 2, 900 mgd, of which about 42 mgd was purchased from public supply sources. In spite of this tremendous demand for water, a sufficient quantity was available to satisfy the needs of the area without serious difficulty. Acid mine drainage presents the greatest single pollution problem in the Pittsburgh area at the present time (1953) because no practical means has been found for its control. The waters of several of the rivers are strongly acid for this reason. Of the three major rivers in the area, Monongahela River waters have the greatest acid concentration and Allegheny River waters the least. Untreated domestic and industrial wastes are additional sources of stream pollution in the area. Much of the water is hard and corrosive, and occasionally has objectionable color, odor, and taste. The treatment used by public water-supply systems using river water is adequate at all times for removal of water-borne causes of disease. Attention is being concentrated on improving the quality of present supplies rather than developing new supplies from upstream tributaries. Present supplies are being improved by providing treatment facilities for disposal of wastes,, by reduction of acid mine drainage discharged into the streams, and by providing storage to augment low flows. The underground water resources are vitally important to the area. The use of ground water in the Pittsburgh area has doubled in the past two decades and in 1951 more ground water was used in Allegheny County than in any other county in

Nine years of charcoal continuous sintering in Belgo-Mineira Iron and Steel Company (BMISC); Nove anos de operacao da sinterizacao continua a carvao vegetal da Companhia Siderurgica Belgo Mineira (CSBM)

Energy Technology Data Exchange (ETDEWEB)

Mines, Claude Rene Camille; Lamas, Vicente Paulo Barroso; Junqueira, Sergio Almeida; Castro, Riolando de Souza; Vital, Raimundo Geraldo; Vieira, Nelson [Companhia Siderurgica Belgo Mineira, Joao Monlevade, MG (Brazil)

1988-12-31

The principal data of the continuous sintering plant from Belgo Mineira Iron and Steel Company, Brazil, are shown. The evolution of data and the operational procedures to obtain them are discussed. The procedures to improve data are also described. (author) 1 ref., 6 figs., 2 tabs.

Elements related to attrition of women faculty at the University of Pittsburgh, School of Medicine: A case study

Science.gov (United States)

Gandhi, Pooja

Recent studies have shown that the number of women faculty in academic medicine is much lesser than the number of women that are graduating from medical schools. Many academic institutes face the challenge of retaining talented faculty and this attrition from academic medicine prevents career advancement of women faculty. This case study attempts to identify some of the reasons for dissatisfaction that may be related to the attrition of women medical faculty at the University of Pittsburgh, School of Medicine. Data was collected using a job satisfaction survey, which consisted of various constructs that are part of a faculty's job and proxy measures to gather the faculty's intent to leave their current position at the University of Pittsburgh or academic medicine in general. The survey results showed that although women faculty were satisfied with their job at the University of Pittsburgh, there are some important factors that influenced their decision of potentially dropping out. The main reasons cited by the women faculty were related to funding pressures, work-life balance, mentoring of junior faculty and the amount of time spent on clinical responsibilities. The analysis of proxy measures showed that if women faculty decided to leave University of Pittsburgh, it would most probably be due to better opportunity elsewhere followed by pressure to get funding. The results of this study aim to provide the School of Medicine at the University of Pittsburgh with information related to attrition of its women faculty and provide suggestions for implications for policy to retain their women faculty.

76 FR 76944 - Circular Welded Carbon Quality Steel Pipe From the People's Republic of China: Rescission of the...

Science.gov (United States)

2011-12-09

... review of entries of the subject merchandise during the POR from the following companies: Adler Steel Ltd. (``Adler Steel''), Al Jazeera Steel Products Co SAOG (``Al Jazeera Steel''), Baoshan Iron & Steel Co., Ltd.... Accordingly, Petitioners timely withdrew its requests for review of Adler Steel, Al Jazeera Steel, Baoshan...

77 FR 64483 - Circular Welded Carbon-Quality Steel Pipe from the Socialist Republic of Vietnam: Notice of Final...

Science.gov (United States)

2012-10-22

...-0649, respectively. SUPPLEMENTARY INFORMATION: Background On June 1, 2012, the Department published in... Pipe from the Socialist Republic of Vietnam;'' ``Verification of the Sales Response of Midwest Air... Steel Joint Stock Company.... Sun Steel Joint Stock 4.57 Company. Huu Lien Asia Corporation........ Huu...

High Energy Ion Bombardment Simulation Facility at the University of Pittsburgh

International Nuclear Information System (INIS)

McGruer, J.N.; Choyke, W.J.; Doyle, N.J.; Spitznagel, J.A.

1975-01-01

The High Energy Ion Bombardment Simulation (HEIBS) Facility located at the University of Pittsburgh is now operational. The E-22 tandem accelerator of the Nuclear Physics Laboratory, fitted with a UNIS source, provides the heavy high energy ions. An auxiliary Van de Graaff accelerator is used for the simultaneous production of He ions. Special features of the simulation laboratory are reported

A study on environmental pollution monitoring and occupational health in the capital iron and steel company, Beijing, China, using nuclear and related analytical techniques

Energy Technology Data Exchange (ETDEWEB)

Chifang, Chai; Xiaolin, Hou; Qinfang, Qian; Wenjun, Ding; Xiangqian, Feng [Institute of High Energy Physics and Laboratory of Nuclear Analysis Techniques, Academia Sinica, Beijing (China); Minxu, Kuang; Hongyu, Wang; Yongchen, Zhang [General Hospital of the Capital Iron and Steel Company, Beijing (China)

1999-12-31

The atmosphere pollution in some Chinese cities is becoming more and more serious with the industrial development in the past decades. The airborne particulate concentration in Beijing, the Capital of China, far exceeds the allowable level set by the Chinese government and by the related international organizations. The main contribution source for the Beijing atmospheric particulate is the Capital Iron and Steel Company, which constitutes 55% of total air-borne particulate in Beijing. In the framework of this CRP organized by IAEA, we select this company as a target workplace. The INAA (instrumental neutron activation analysis), PIXE (proton induced X-ray emission analysis), SRXRF (synchronous radiation X-ray fluorescence spectrometry) and other related techniques will be applied to determine the concentrations of some target elements, e.g. heavy metal and toxic elements, in environmental samples (including airborne particulate, soil and plants) and human samples (including head hair, urine and blood) collected from this company, its surrounding region and a non-polluted region as a control. The activity completed at the first year and the working plan for next year is outlined in this report. Other related information will be dealt with as well. (author) 7 refs, 1 tab

A study on environmental pollution monitoring and occupational health in the capital iron and steel company, Beijing, China, using nuclear and related analytical techniques

International Nuclear Information System (INIS)

Chai Chifang; Hou Xiaolin; Qian Qinfang; Ding Wenjun; Feng Xiangqian; Kuang Minxu; Wang Hongyu; Zhang Yongchen

1998-01-01

The atmosphere pollution in some Chinese cities is becoming more and more serious with the industrial development in the past decades. The airborne particulate concentration in Beijing, the Capital of China, far exceeds the allowable level set by the Chinese government and by the related international organizations. The main contribution source for the Beijing atmospheric particulate is the Capital Iron and Steel Company, which constitutes 55% of total air-borne particulate in Beijing. In the framework of this CRP organized by IAEA, we select this company as a target workplace. The INAA (instrumental neutron activation analysis), PIXE (proton induced X-ray emission analysis), SRXRF (synchronous radiation X-ray fluorescence spectrometry) and other related techniques will be applied to determine the concentrations of some target elements, e.g. heavy metal and toxic elements, in environmental samples (including airborne particulate, soil and plants) and human samples (including head hair, urine and blood) collected from this company, its surrounding region and a non-polluted region as a control. The activity completed at the first year and the working plan for next year is outlined in this report. Other related information will be dealt with as well. (author)

Technology programme SULA 2. Energy in steel and base metal production. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

SULA 2 is the energy research programme of the steel and metal producing industry. Central steel and metal producing companies are Outokumpu, Rautaruukki, Imatra Steel and Fundia Wire which is a subsidiary of Rautaruukki. The priorities of the SULA 2 programme are in process development. Worthwhile areas of concentration in energy research by Finland include the following: Iron and steel production; Zinc production; The production of ferrochromium and stainless steel; The pyrometallurgical production of copper and nickel and Rolling and heat treatment of steel In addition to the steel and metal producers the following companies participate in some projects: Kuusakoski, Kumera, Fiskars Tools and BETKER. Research work is performed in the following universities and research centers: Helsinki University of Technology, Oulu University, Aabo Akademi University, Tampere University of Technology, VTT Energy and VTT Building Technology. The total number of projects in SULA 2 programme is 51. Of these 20 are research institute projects, 21 are company R and D projects and 10 are energy conservation projects funded by Ministry of Trade and Industry. The total research costs are ca. 130 million FIM. The major part of costs is carried by the participating companies, 62 % and by public funding (Ministry of Trade and Industry, TEKES, The Academy of Finland) 36 %. In six projects the objective of research was studying and inventing new production processes or equipment. Results so far are a new production process for the Tornio stainless steel plant and a new design of ore concentrate rotary dryer, which has been commercialized. The electric energy consumption of the melting shop in Tornio has decreased by 25 %, and the production capacity has increased accordingly. Considerable savings in production process energy consumption, estimable from production reports have been achieved in several projects. The total amount of estimable saving in specific energy consumption is about 900

Technology programme SULA 2. Energy in steel and base metal production. Final report

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-07-01

SULA 2 is the energy research programme of the steel and metal producing industry. Central steel and metal producing companies are Outokumpu, Rautaruukki, Imatra Steel and Fundia Wire which is a subsidiary of Rautaruukki. The priorities of the SULA 2 programme are in process development. Worthwhile areas of concentration in energy research by Finland include the following: Iron and steel production; Zinc production; The production of ferrochromium and stainless steel; The pyrometallurgical production of copper and nickel and Rolling and heat treatment of steel In addition to the steel and metal producers the following companies participate in some projects: Kuusakoski, Kumera, Fiskars Tools and BETKER. Research work is performed in the following universities and research centers: Helsinki University of Technology, Oulu University, Aabo Akademi University, Tampere University of Technology, VTT Energy and VTT Building Technology. The total number of projects in SULA 2 programme is 51. Of these 20 are research institute projects, 21 are company R and D projects and 10 are energy conservation projects funded by Ministry of Trade and Industry. The total research costs are ca. 130 million FIM. The major part of costs is carried by the participating companies, 62 % and by public funding (Ministry of Trade and Industry, TEKES, The Academy of Finland) 36 %. In six projects the objective of research was studying and inventing new production processes or equipment. Results so far are a new production process for the Tornio stainless steel plant and a new design of ore concentrate rotary dryer, which has been commercialized. The electric energy consumption of the melting shop in Tornio has decreased by 25 %, and the production capacity has increased accordingly. Considerable savings in production process energy consumption, estimable from production reports have been achieved in several projects. The total amount of estimable saving in specific energy consumption is about 900

Computational Modeling Develops Ultra-Hard Steel

Science.gov (United States)

2007-01-01

Glenn Research Center's Mechanical Components Branch developed a spiral bevel or face gear test rig for testing thermal behavior, surface fatigue, strain, vibration, and noise; a full-scale, 500-horsepower helicopter main-rotor transmission testing stand; a gear rig that allows fundamental studies of the dynamic behavior of gear systems and gear noise; and a high-speed helical gear test for analyzing thermal behavior for rotorcraft. The test rig provides accelerated fatigue life testing for standard spur gears at speeds of up to 10,000 rotations per minute. The test rig enables engineers to investigate the effects of materials, heat treat, shot peen, lubricants, and other factors on the gear's performance. QuesTek Innovations LLC, based in Evanston, Illinois, recently developed a carburized, martensitic gear steel with an ultra-hard case using its computational design methodology, but needed to verify surface fatigue, lifecycle performance, and overall reliability. The Battelle Memorial Institute introduced the company to researchers at Glenn's Mechanical Components Branch and facilitated a partnership allowing researchers at the NASA Center to conduct spur gear fatigue testing for the company. Testing revealed that QuesTek's gear steel outperforms the current state-of-the-art alloys used for aviation gears in contact fatigue by almost 300 percent. With the confidence and credibility provided by the NASA testing, QuesTek is commercializing two new steel alloys. Uses for this new class of steel are limitless in areas that demand exceptional strength for high throughput applications.

78 FR 16252 - Certain Hot-Rolled Carbon Steel Flat Products From India, Indonesia, and Thailand: Final Results...

Science.gov (United States)

2013-03-14

... Indonesia P.T. Krakatau Steel 10.21 All Others 10.21 Thailand Sahaviriya Steel Industries Public Company...] Certain Hot-Rolled Carbon Steel Flat Products From India, Indonesia, and Thailand: Final Results of... products (``HR steel'') from India, Indonesia, and Thailand pursuant to section 751(c) of the Tariff Act of...

Mobbing and harassment in the steel enterprises

Directory of Open Access Journals (Sweden)

J. Vveinhardt

2017-01-01

Full Text Available Mobbing and harassment are widely analysed in organizations providing various services but are little studied in the companies undertaking industrial activities. Therefore, the aim of the paper is to diagnose the prevalence of mobbing and harassment in the steel enterprises. The case study analysis of the largest steel producer in the world, and specifically its division in Poland was used to determine the prevalence of these phenomena. It was found out that the said company is the example of the ethically and socially responsible organization. However, the interviews indicate that single cases of mobbing and harassment activities (though relatively rare were also observed. They were distributed among three groups of employees: 1 those who do physical work (are directly engaged in the production process; 2 employees involved in the administrative activity and sales; and 3 managerial staff.

Consolidation in World Steel Industry - Implications for Poland

OpenAIRE

Beata Ślusarczyk

2009-01-01

Consolidation of enterprises has intensified with the growth of global competition. In the nineties of the past century, these processes became a conventional way for market expansion, leading to establishment of huge international companies with biggest influence on world economy. In steel industry, processes of consolidation have also been the leading processes in management, particularly during a time of prosperity for steel products that have taken place in recent years. The global consol...

Iron and steel research at CENIM

International Nuclear Information System (INIS)

Medina, S. F.; Lopez, F.; Morcillo, M.

2003-01-01

In 2002 the National Centre for Metallurgical Research (CENIM) celebrated its 39th anniversary. During this time, steel has been the most studied material of all the metals and alloys researched in the different projects funded by national science and technology plans, European metallurgical research programmes, and by the iron and steel making companies who over the years have placed their trust in the research work undertaken at CENIM. Two generations of researchers have dedicated their careers to studying the different aspects of steel, from primary metallurgy considering iron ores and enrichment processes, the thermodynamics of reactions in the blast furnace and in the ladle, thermal and thermomechanical treatments, the physical metallurgy of steels, their mechanical properties, and finally their deterioration in a wide range of media of different aggressivities. CENIM maintains its commitment to iron and steel research, drawing attention to the vast amount of research work undertaken and financed within the framework of the ECSC programme since Spain joined the European Community in January 1986. (Author) 3 refs

78 FR 21105 - Circular Welded Carbon Steel Pipes and Tubes From Thailand: Preliminary Results of Antidumping...

Science.gov (United States)

2013-04-09

.../exporters of the subject merchandise, Saha Thai Steel Pipe (Public) Company, Ltd. (Saha Thai), and Pacific Pipe Company Limited (Pacific Pipe). The period of review (POR) is March 1, 2011, through February 29...) Company, Ltd 0.00 Pacific Pipe Company Limited * * No shipments or sales subject to this review. The firm...

CHARACTERIZATION OF NEW TOOL STEEL FOR ALUMINUM EXTRUSION DIES

Directory of Open Access Journals (Sweden)

José Britti Bacalhau

2014-06-01

Full Text Available Aluminum extrusion dies are an important segment of application on industrial tools steels, which are manufactured in steels based on AISI H13 steel. The main properties of steels applied to extrusion dies are: wear resistance, impact resistance and tempering resistance. The present work discusses the characteristics of a newly developed hot work steel to be used on aluminum extrusion dies. The effects of Cr and Mo contents with respect to tempering resistance and the Al addition on the nitriding response have been evaluated. From forged steel bars, Charpy impact test and characterization via EPMA have been conducted. The proposed contents of Cr, Mo, and Al have attributed to the new VEX grade a much better tempering resistance than H13, as well as a deeper and harder nitrided layer. Due to the unique characteristics, this new steel provides an interesting alternative to the aluminum extrusion companies to increase their competitiveness.

78 FR 22285 - Notice of Inventory Completion: Carnegie Museum of Natural History, Pittsburgh, PA

Science.gov (United States)

2013-04-15

....R50000] Notice of Inventory Completion: Carnegie Museum of Natural History, Pittsburgh, PA AGENCY: National Park Service, Interior. ACTION: Notice. SUMMARY: The Carnegie Museum of Natural History has... associated funerary objects should submit a written request to the Carnegie Museum of Natural History. If no...

Pittsburgh 2013 Energy Baseline: Consumption, Trends & Opportunities

Energy Technology Data Exchange (ETDEWEB)

Tarka, Thomas J. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); James III, Robert E. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Withum, Jeffrey A. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Plowman, Brian [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Shih, Chung Yan [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

2017-03-01

The United States (U.S.) Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) are working in conjunction with the City of Pittsburgh (City) to transform how energy is produced, transported, and consumed in the City. This transformation will rely on 21st Century Energy Infrastructure designs, which leverage advanced technology and design techniques to modernize energy infrastructure, create new business models and markets, and expand technology research and development opportunities. Achieving this vision will require developing solutions that are unique to the City: its climate, topography, energy needs, resources, and existing infrastructure.a In this way, the City will demonstrate what the American “City of the Future” looks like, with all its attendant environmental, economic, and job-creation benefits. It will also serve as a template for other cities seeking to reinvent their energy systems.

78 FR 40428 - Certain Hot-Rolled Carbon Steel Flat Products from India: Rescission of Antidumping Duty...

Science.gov (United States)

2013-07-05

..., through November 30, 2012, based on a request by United States Steel Corporation (U.S. Steel) and Nucor Corporation (Nucor).\\1\\ The review covers eight companies.\\2\\ \\1\\ See Initiation of Antidumping and...) (Initiation Notice). \\2\\ See id., 78 FR 6292. Nucor and U.S. Steel withdrew their requests for an...

Structural validity of the Pittsburgh Sleep Quality Index in Chinese undergraduate students: A confirmatory factor analysis

Directory of Open Access Journals (Sweden)

Suran Guo

2016-08-01

Full Text Available The purpose of this study was to examine the structural validity of the Pittsburgh Sleep Quality Index (PSQI in Chinese undergraduate students. A cross-sectional questionnaire survey with 631 Chinese undergraduate students was conducted, and the questionnaire package included a measure of demographic characteristics, Pittsburgh Sleep Quality Index (PSQI, Chinese editions of Center for Epidemiologic Studies-Depression, State- Trait Anxiety Inventory, Rumination Response Scale, and Perceived Social Support Scale. Results showed that the item use of sleep medicine was not suitable for use with this population, that a two-factor model provided the best fit to the data as assessed through confirmatory factor analysis, and that other indices were consistently correlated with the sleep quality but not the sleep efficiency factor.

Shared Learning and the Drive to Improve Patient Safety: Lessons Learned from the Pittsburgh Regional Healthcare Initiative

National Research Council Canada - National Science Library

Sirio, Carl A; Keyser, Donna J; Norman, Heidi; Weber, Robert J; Muto, Carlene A

2005-01-01

Based on lessons learned through implementation of the Pittsburgh Regional Healthcare Initiative's region-wide shared learning model, we have identified the environmental, cultural, and infrastructure...

Using a Merit-Based Scholarship Program to Increase Rates of College Enrollment in an Urban School District: The Case of the Pittsburgh Promise

Science.gov (United States)

Bozick, Robert; Gonzalez, Gabriella; Engberg, John

2015-01-01

The Pittsburgh Promise is a scholarship program that provides $5,000 per year toward college tuition for public high school graduates in Pittsburgh, Pennsylvania who earned a 2.5 GPA and a 90% attendance record. This study used a difference-in-difference design to assess whether the introduction of the Promise scholarship program directly…

Structural Validity of the Pittsburgh Sleep Quality Index in Chinese Undergraduate Students

OpenAIRE

Guo, Suran; Sun, Wenmei; Liu, Chang; Wu, Siwei

2016-01-01

The purpose of this study was to examine the structural validity of the Pittsburgh Sleep Quality Index (PSQI) in Chinese undergraduate students. A cross-sectional questionnaire survey with 631 Chinese undergraduate students was conducted, and the questionnaire package included a measure of demographic characteristics, PSQI, Chinese editions of Center for Epidemiologic Studies-Depression, State- Trait Anxiety Inventory, Rumination Response Scale, and Perceived Social Support Scale. Results sho...

Pittsburgh Regional Healthcare Initiative puts new spin on improving healthcare quality.

Science.gov (United States)

2002-11-01

For nearly 4 years, the Pittsburgh Regional Healthcare Initiative (PRHI) has been working to improve the way healthcare is delivered in southwestern Pennsylvania by combining the voices and resources of hospitals, providers, the business community, insurers, health plans, and federal agencies. As one example of borrowing from business, the PRHI has created a new learning and management system, called Perfecting Patient Care, which is based on the Toyota Production System model and is now being used successfully in hospitals.

Testing of the 3M Company ACCR Conductor

Energy Technology Data Exchange (ETDEWEB)

Stovall, J.P.; RIzy, D.T.; Kisner, R.A.; Deve, H.E. (3M Comp.)

2010-09-15

The 3M Company has developed a high-temperature low-sag conductor referred to as Aluminum- Conductor Composite-Reinforced or ACCR. The conductor uses an aluminum metal matrix material to replace the steel in conventional conductors so the core has a lower density and higher conductivity. The objective of this work is to accelerate the commercial acceptance by electric utilities of these new conductor designs by testing four representative conductor classes in controlled conditions. Overhead transmission lines use bare aluminum conductor strands wrapped around a steel core strands to transmit electricity. The typical cable is referred to as aluminum-conductor steel-reinforced (ACSR). The outer strands are aluminum, chosen for its conductivity, low weight, and low cost. The center strand is of steel for the strength required to support the weight without stretching the aluminum due to its ductility. The power density of a transmission corridor has been directly increased by increasing the voltage level. Transmission voltages have increased from 115-kV to 765- kV over the past 80 years. In the United States, further increasing the voltage level is not feasible at this point in time, so in order to further increase the power density of a transmission corridor, conductor designs that increase the current carrying capability have been examined. One of the key limiting factors in the design of a transmission line is the conductor sag which determines the clearance of the conductor above ground or underlying structures needed for electrical safety. Increasing the current carrying capability of a conductor increases the joule heating in the conductor which increases the conductor sag. A conductor designed for high-temperature and lowsag operation requires an engineered modification of the conductor materials. To make an advanced cable, the 3M Company solution has been the development of a composite conductor consisting of Nextel ceramic fibers to replace the steel core and

Inspection of steel poles; ultrasonic testing of anchor ground rods and cathodic reactions : Corrosion detection : an emerging problem in buried steel structures

Energy Technology Data Exchange (ETDEWEB)

Pandey, A.K.; Randle, R.E.; Stewart, A.H. [EDM International Inc., Fort Collins, CO (United States)

2002-07-01

A typical inspection of steel utility poles routinely overlooks what is below ground, such as anchor rods, stub angles in lattice towers, and direct embedded steel poles. Stub angles are lap or butt spliced to the tower leg and extend several feet below ground line. A case study concerning stub angles (Oberst 1998) is discussed. An inspection of steel poles erected in 1929 revealed that 40 per cent of legs had complete loss of galvanizing, 10 per cent of legs had greater than 10 per cent loss of cross-section, and 2 per cent of legs had greater than 80 per cent loss of cross-section. All corrosion was found within one foot of ground line. A relatively new concept is direct embedded steel poles. An emerging problem concerns tree induced anchor rod corrosion. A corrosion technique for anchor rods was developed and has been commercially available for the past three years. Its effectiveness was verified at the Montana Power Company 500 kV Colstrip Project, where 3 anchor failures were detected in 1995 due to corrosion wastage. The rods are classified as being in good condition up to 10 per cent loss of cross-section, moderate corrosion for losses between 10 and 25 per cent, and excessive corrosion for losses greater than 25 per cent. The results obtained at the Montana Power Company indicated the technique was 98 per cent accurate. The authors discuss the capabilities and limitations of the technique. It was also applied for the Anchor Rod Inspection Project of the Georgia Power Company (GPC). The technique is evaluated in the laboratory, then optimized. Field prototypes are developed, followed by an evaluation at different test sites. figs.

Irradiated dynamic fracture toughness of ASTM A533, Grade B, Class 1 steel plate and submerged arc weldment. Heavy section steel technology program technical report No. 41

International Nuclear Information System (INIS)

Davidson, J.A.; Ceschini, L.J.; Shogan, R.P.; Rao, G.V.

1976-10-01

As a result of the Heavy Section Steel Technology Program (HSST), sponsored by the Nuclear Regulatory Commission, Westinghouse Electric Corporation conducted dynamic fracture toughness tests on irradiated HSST Plate 02 and submerged arc weldment material. Testing performed at the Westinghouse Research and Development Laboratory in Pittsburgh, Pennsylvania, included 0.394T compact tension, 1.9T compact tension, and 4T compact tension specimens. This data showed that, in the transition region, dynamic test procedures resulted in lower (compared to static) fracture toughness results, and that weak direction (WR) oriented specimen data were lower than the strong direction (RW) oriented specimen results. Irradiated lower-bound fracture toughness results of the HSST Program material were well above the adjusted ASME Section III K/sub IR/ curve. An irradiated and nonirradiated 4T-CT specimen was tested during a fracture toughness test as a preliminary study to determine the effect of irradiation on the acoustic emission-stress intensity factor relation in pressure vessel grade steel. The results indicated higher levels of acoustic emission activity from the irradiated sample as compared to the unirradiated one at a given stress intensity factor (K) level

Experimental particle physics at the University of Pittsburgh: Progress report, April 1, 1988--March 31, 1989

International Nuclear Information System (INIS)

Cleland, W.E.; Coon, D.D.; Engels, E. Jr.; Shepard, P.F.; Thompson, J.A.

1988-12-01

This report discusses the experimental work in particle physics at the University of Pittsburgh. Topics discussed are: lepton production at the CERN SPS; direct photon production at the Tevatron; and search for fractional charge particles in semiconductors

The Development of Lightweight Commercial Vehicle Wheels Using Microalloying Steel

Science.gov (United States)

Lu, Hongzhou; Zhang, Lilong; Wang, Jiegong; Xuan, Zhaozhi; Liu, Xiandong; Guo, Aimin; Wang, Wenjun; Lu, Guimin

Lightweight wheels can reduce weight about 100kg for commercial vehicles, and it can save energy and reduce emission, what's more, it can enhance the profits for logistics companies. The development of lightweight commercial vehicle wheels is achieved by the development of new steel for rim, the process optimization of flash butt welding, and structure optimization by finite element methods. Niobium micro-alloying technology can improve hole expansion rate, weldability and fatigue performance of wheel steel, and based on Niobium micro-alloying technology, a special wheel steel has been studied whose microstructure are Ferrite and Bainite, with high formability and high fatigue performance, and stable mechanical properties. The content of Nb in this new steel is 0.025% and the hole expansion rate is ≥ 100%. At the same time, welding parameters including electric upsetting time, upset allowance, upsetting pressure and flash allowance are optimized, and by CAE analysis, an optimized structure has been attained. As a results, the weight of 22.5in×8.25in wheel is up to 31.5kg, which is most lightweight comparing the same size wheels. And its functions including bending fatigue performance and radial fatigue performance meet the application requirements of truck makers and logistics companies.

Effect of Ethanol Chemistry on SCC of Carbon Steel

Science.gov (United States)

2011-02-22

Pipeline companies have a keen interest in assessing the feasibility of transporting fuel grade ethanol (FGE) and ethanol blends in existing pipelines. Previous field experience and laboratory research, funded by PRCI and API, has shown that steel ca...

75 FR 4529 - Circular Welded Carbon Steel Pipes and Tubes From Thailand: Final Results of Antidumping Duty New...

Science.gov (United States)

2010-01-28

... Compliance Analyst, Office 6, Verification of the Sales Response of Pacific Pipe Public Company, Limited in... Pipe Public Company, Limited, dated August 24, 2009 (Bona Fides Preliminary Memorandum). The Department... Circular Welded Carbon Steel Pipes and Tubes from Thailand: Pacific Pipe Public Company, Limited, dated...

Results of the radiological survey at the Jessop Steel Company Site, 500 Green Street, Washington, Pennsylvania (JSP001)

International Nuclear Information System (INIS)

Cottrell, W.D.; Foley, R.D.; Floyd, L.M.

1991-04-01

At the request of the US Department of Energy (DOE), a group from Oak Ridge National Laboratory conducted investigative radiological surveys at the Jessop Steel company, 500 Green Street, Washington, Pennsylvania (JSP001) in 1989. The purpose of the surveys was to determine whether the property was contaminated with radioactive residues, principally 238 U, as a result of work contracted to the Atomic Energy Commission. The survey included gamma scans; direct and transferable measurements of alpha and beta-gamma radiation levels; and soil dust, debris, grinding wheel, and air sampling for radionuclide analyses. The survey and sampling covered portions of the exterior ground surface, the roof and gutter section above the saw shop and rolling mill area of building D, and the interiors of buildings A, B, C and D. Results of the survey demonstrated no radionuclide concentrations in excess of the DOE Formerly Utilized Sites Remedial Action Program guidelines for radium, thorium, and uranium. The radionuclide distributions were not significantly different from typical background levels in the Pennsylvania are. 7 refs., 11 figs., 4 tabs

National steel tries wheeling

International Nuclear Information System (INIS)

Dudak, J.R.

1992-01-01

In 1989, National Steel felt the need to take the next step to make its Detroit-based division, Great Lakes Steel, more competitive in the world flat-rolled steel market. In 1988, Great Lakes Steel started flowing natural gas through the first fully litigated bypass (Competitive Sourcing Option) of a local distribution company. In 1989, the second connection with the new supply route for gas transportation, Panhandle Eastern had started flowing and the LDC, Michigan Consolidated Gas Co. (MichCon) had pulled out their piping previously serving the plants. Since we had been able to structure a fully reliable supply route, storage and balancing program for gas in the face of such strong opposition by the LDC, the author felt it was time to attack the next singularly sourced major commodity, electricity. Electricity, at this major integrated steel plant, represented approximately 7% of plant cost yearly. Yet being monopolized, Great Lakes Division (GLD) could not multiple source this commodity like it does with its other 93% of costs, except for labor (25% of the 93%). Multiple sourcing is done to bring competitive pressure to suppliers and to diversify supplies and protect plant operation in the event of failure by one supplier. This paper describes National Steel's strategy to reduce the cost of power, at the minimum of capital costs, the most expedient way possible, that does not sacrifice any major long-term potential cost improvements. The results show that competitively priced power is available across the mid-west, at prices well below many state regulated electric utilities, for at least 5 to 15 years, but with major obstacles in obtaining transmission access

Prevention of radioactivity in steel. Necessity of an international co-operation between industry and government

International Nuclear Information System (INIS)

Amedro, G.

1999-01-01

European steel companies will not melt radioactive contaminated scrap, even if it would be allowed to do so by legislation and proposed clearance levels. Scrap delivering companies as well as steel producing companies are well armed with scrap charge control. Additional control during steelmaking is given by analysing a crude steel sample of each heat. Regulations regarding health criteria are available on national and European level (RP43 and RP89) but are not usable in practice for the control of scrap. Problems which are at present left to be solved by each site equipped with a means of detection cover principally the following areas: Definition and detection of abnormal radioactivity without identification of the radioactive element; Common definition of alarm thresholds by suppliers and customers; Emergency isolation measures for suspect vehicles (e.g. immediate return or quarantine), notably involving illicit material from a third country; Identification, isolation, handling and destination of discovered radioactive products; Financing of associated costs; Public relations; Preventive actions. It seems to be necessary to produce a benchmark for the activity level in finished steel to determine the actual level of 'normal radioactivity' in the European steel pool. A comparison of the actual state of the art in the European steel industry due to the measures already taken would be useful. The present situation can only be efficiently improved by action in common. Industry has made large investments in detection equipment and in staff training. It has now practical experience. Additional regulatory provisions and appropriate logistical means are now awaited from government, i.e. concerning technical know-how and expertise, properly adapted equipment and in certain cases financial intervention. European directives should not constitute an impediment and should, if necessary, be adapted to needs. When the situation is clarified, future regular checks will be an

Multimodal imaging Gd-nanoparticles functionalized with Pittsburgh compound B or a nanobody for amyloid plaques targeting.

Science.gov (United States)

Pansieri, Jonathan; Plissonneau, Marie; Stransky-Heilkron, Nathalie; Dumoulin, Mireille; Heinrich-Balard, Laurence; Rivory, Pascaline; Morfin, Jean-François; Toth, Eva; Saraiva, Maria Joao; Allémann, Eric; Tillement, Olivier; Forge, Vincent; Lux, François; Marquette, Christel

2017-07-01

Gadolinium-based nanoparticles were functionalized with either the Pittsburgh compound B or a nanobody (B10AP) in order to create multimodal tools for an early diagnosis of amyloidoses. The ability of the functionalized nanoparticles to target amyloid fibrils made of β-amyloid peptide, amylin or Val30Met-mutated transthyretin formed in vitro or from pathological tissues was investigated by a range of spectroscopic and biophysics techniques including fluorescence microscopy. Nanoparticles functionalized by both probes efficiently interacted with the three types of amyloid fibrils, with K D values in 10 micromolar and 10 nanomolar range for, respectively, Pittsburgh compound B and B10AP nanoparticles. Moreover, they allowed the detection of amyloid deposits on pathological tissues. Such functionalized nanoparticles could represent promising flexible and multimodal imaging tools for the early diagnostic of amyloid diseases, in other words, Alzheimer's disease, Type 2 diabetes mellitus and the familial amyloidotic polyneuropathy.

Prosperity in Pittsburgh. Special Librarians Gather to Reaffirm the Ties that Bind this Varied and Growing Association

Science.gov (United States)

Library Journal, 1973

1973-01-01

Everything, for the second year in a row, seemed to be looking up for the Special Libraries Association as it gathered in Pittsburgh in June. This article is a brief report on the conference. (Author/SJ)

THE STEEL EUROPEAN STOCK MARKET EFFICIENCY

Directory of Open Access Journals (Sweden)

Viorica CHIRILA

2015-12-01

Full Text Available Testing the hypothesis of informational efficiency is a permanent preoccupation of researchers because the theories and the models of modern finance are based on it. This paper presents the results obtained after testing the efficiency hypothesis, in the weak form, for the European stock market of the companies that belong to the economic steel sub-sector. Following the use of both linear and non-linear tests of autocorrelation of returns we can conclude that the European stock market in the economic steel sub-sector is inefficient from an informational point of view and the investors in these stocks may obtain better results than those of the European market in general.

Experimental particle physics at the University of Pittsburgh

International Nuclear Information System (INIS)

Engels, E. Jr.; Shepard, P.F.; Thompson, J.A.

1994-05-01

Task A involves the study of kaon decays. The overall physics focus of the current work is rare and semi-rare decays of the φ and the short-lived kaon, with an emphasis on those aspects needed in preparation for the proposed Φ-factory measurements of CPT violation. Another aspect of the rare kaon decay work is E865 at BNL, a search for K + yields π + μ + e - , a lepton number violating process. Pittsburgh's E865 responsibilities are the design and construction of the Cerenkov counters. The major goals of task B are as follows: (1) the analysis of the E706 (direct photon production) data taken during the 1987--1988 and 1990--1991 target runs at Fermilab and (2) the continuation of work within SVXII group of the CDF collaboration. The CDF program involves a dedicated effort towards the design of the silicon vertex detector upgrade, SVXII

Pneumonia caused by Pittsburgh pneumonia agent: radiologic manifestations

International Nuclear Information System (INIS)

Muder, R.R.; Reddy, S.C.; Yu, V.L.; Kroboth, F.J.

1984-01-01

Using an objective scoring system, chest radiographs were reviewed in 23 cases of pneumonia due to the Pittsburgh pneumonia agent (PPA, Tatlockia micdadei, Legionella micdadei), including six cases of pneumonia with simultaneous isolation of PPA and L pneumophila (Legionnaires' disease). Infiltrates were typically segmental to lobar; nodular infiltrates were noted in three cases. Spread to additional lobes after presentation occurred in four of 17 PPA infections. Pneumonia caused by both PPA and L pneumophila was unusually severe, with involvement of all lobes occurring in four of six cases, compared with one of 17 cases of PPA infection (p>0.02). Radiographic severity did not correlate with underlying disease, immune status, or outcome. The majority of patients receiving erythromycin demonstrated objective radiologic improvement. In a patients, population that included nonimmunosuppressed patient, nodule formation and rapid radiologic progression were not found to be characteristic of PPA pneumonia

Experimental particle physics at the University of Pittsburgh. Progress report, 1 November 1993--31 October 1994

Energy Technology Data Exchange (ETDEWEB)

Engels, E. Jr.; Shepard, P.F.; Thompson, J.A.

1994-05-01

Task A involves the study of kaon decays. The overall physics focus of the current work is rare and semi-rare decays of the {phi} and the short-lived kaon, with an emphasis on those aspects needed in preparation for the proposed {Phi}-factory measurements of CPT violation. Another aspect of the rare kaon decay work is E865 at BNL, a search for K{sup +} yields {pi}{sup +}{mu}{sup +}e{sup {minus}}, a lepton number violating process. Pittsburgh`s E865 responsibilities are the design and construction of the Cerenkov counters. The major goals of task B are as follows: (1) the analysis of the E706 (direct photon production) data taken during the 1987--1988 and 1990--1991 target runs at Fermilab and (2) the continuation of work within SVXII group of the CDF collaboration. The CDF program involves a dedicated effort towards the design of the silicon vertex detector upgrade, SVXII.

Dramix® Steel fibres in residential foundation slabs in Czech Republic: design approach

Science.gov (United States)

Pouillon, S.

2017-09-01

Steel fibres are used more and more in structural concrete elements, like residential foundation slabs. The development of high performant steel fibres (e.g. Dramix® 4D and 5D), the evolution in standardization and the demand coming from construction companies and investors are pushing this trend. Engineers are using the yield line method to design steel fibre concrete structures in an easy and economical way, especially if the structure has a regular load layout mainly containing wall loads and point loads. The load configuration, soil characteristics and material characteristics determine the final solution.

Case study of the public relations program of U. S. Steel's Utah fluorosis program

Energy Technology Data Exchange (ETDEWEB)

McQuiddy, A.R.

1958-01-01

In the 1950s, fluoride emissions were determined to be a problem at US Steel's Geneva Steel Works in Utah. Neighboring farms were affected, in that fluorosis was found in cattle. The problem was settled in litigation, and US Steel installed state-of-the-art pollution control technology on the steel mill in order to eliminate recurrence. The investigations that led to the elucidation of fluorides as the problem, the installation of pollution control equipment, and the public relations efforts on the part of the company are described. 22 references.

Socially responsible companies performance: an analysis with financial and accounting ratios

Directory of Open Access Journals (Sweden)

Marcelo Alvaro da Silva Macedo

2008-07-01

listed, were the Paper and Pulp and Steel and Metallurgy. From this point, it was made a comparison of the behavior of the socially responsible companies with the other belonging to their sector, which were listed among the Best and Bigger, “Maiores e Melhores” from the Exame Magazine (2006. The idea is to check if the companies which have adopted “politically” correct practices through social and environmental actions showed a performance, in terms of liquidity, debt and profitability, statistically higher in relation to the market. The results show that, it isn’t observed significant differences in the indexes under analysis between the two companies groups (socially responsible and the market. Key-words: Social Responsibility; Performance; ISE.

Biomonitoring of some heavy metal contaminations from a steel ...

African Journals Online (AJOL)

Soil and plants growing in the vicinity of industrial areas display increased concentrations of heavy metals and give an indication of the environmental quality. The contamination source for aluminum, iron, nickel and lead in the Botanical garden of Mobarakeh Steel Company was recognized by analyzing the leaves and ...

75 FR 5146 - Tempel Steel Company Including On-Site Leased Workers From Aerotek Staffing Chicago, IL; Tempel...

Science.gov (United States)

2010-02-01

... the production of lamination sheet steel for electric motors and transformers. New findings show that... affected by a shift in production of lamination sheet steel for electric motors and transformers to Mexico...

Brightside Academy: Pittsburgh, Pennsylvania

Science.gov (United States)

Horn, Sarah

2009-01-01

Since its inception in 1992, Brightside Academy has been providing quality care to children six weeks to 12 years old. Operating 49 locations in Pennsylvania, Ohio, and New York, the company is committed to strengthening learners and respecting families. Currently, the organization provides early education for 6,700 children on a daily basis. 90%…

Formability Characterization of a New Generation High Strength Steels

Energy Technology Data Exchange (ETDEWEB)

Sriram Sadagopan; Dennis Urban; Chris Wong; Mai Huang; Benda Yan

2003-05-16

Advanced high strength steels (AHSS) are being progressively explored by the automotive industry all around the world for cost-effective solutions to accomplish vehicle lightweighting, improve fuel economy, and consequently reduce greenhouse emissions. Because of their inherent high strength, attractive crash energy management properties, and good formability, the effective use of AHSS such as Duel Phase and TRIP (Transformation Induced Plasticity) steels, will significantly contribute to vehicle lightweighting and fuel economy. To further the application of these steels in automotive body and structural parts, a good knowledge and experience base must be developed regarding the press formability of these materials. This project provides data on relevant intrinsic mechanical behavior, splitting limits, and springback behavior of several lots of mild steel, conventional high strength steel (HSS), advanced high strength steel (AHSS) and ultra-high strength steel (UHSS), supplied by the member companies of the Automotive Applications Committee (AAC) of the American Iron and Steel Institute (AISI). Two lots of TRIP600, which were supplied by ThyssenKrupp Stahl, were also included in the study. Since sheet metal forming encompasses a very diverse range of forming processes and deformation modes, a number of simulative tests were used to characterize the forming behavior of these steel grades. In general, it was found that formability, as determined by the different tests, decreased with increased tensile strength. Consistant with previous findings, the formability of TRIP600 was found to be exceptionally good for its tensile strength.

78 FR 69878 - AT&T Corporation, a Subsidiary of AT&T Inc., Business Billing Customer Care, Pittsburgh...

Science.gov (United States)

2013-11-21

... Subsidiary of AT&T Inc., Business Billing Customer Care, Pittsburgh, Pennsylvania; Notice of Affirmative... workers and former workers of AT&T Corporation, a subsidiary of AT&T Inc., Business Billing Customer Care... supplied by Business Billing Customer Care to other locations within the United States. With respect to...

Internal attachment of laser beam welded stainless steel sheathed thermocouples into stainless steel upper end caps in nuclear fuel rods for the LOFT Reactor

International Nuclear Information System (INIS)

Welty, R.K.; Reid, R.D.

1980-01-01

The Exxon Nuclear Company, Inc., acting as a subcontractor to EG and G Idaho Inc., Idaho National Engineering Laboratory, Idaho Falls, Idaho, conducted a laser beam welding study to attach internal stainless steel thermocouples into stainless steel upper end caps in nuclear fuel rods. The objective of this study was to determine the feasibility of laser welding a single 0.063 inch diameter stainless steel (304) sheathed thermocouple into a stainless steel (316) upper end cap for nuclear fuel rods. A laser beam was selected because of the extremely high energy input in unit volume that can be achieved allowing local fusion of a small area irrespective of the difference in material thickness to be joined. A special weld fixture was designed and fabricated to hold the end cap and the thermocouple with angular and rotational adjustment under the laser beam. A commercial pulsed laser and energy control system was used to make the welds

Using CCT Diagrams to Optimize the Composition of an As-Rolled Dual-Phase Steel

Science.gov (United States)

Coldren, A. Phillip; Eldis, George T.

1980-03-01

A continuous-cooling transformation (CCT) diagram study was conducted for the purpose of optimizing the composition of a Mn-Si-Cr-Mo as-rolled dual-phase (ARDP) steel. The individual effects of chromium, molybdenum, and silicon on the allowable cooling rates were determined. On the basis of the CCT diagram study and other available information, an optimum composition was selected. Data from recent mill trials at three steel companies, involving steels with compositions in or near the newly recommended range, are presented and compared with earlier mill trial data. The comparison shows that the optimized composition is highly effective in making the steel's properties more uniform and reproducible in the as-rolled condition.

Different perceptions of company leaders: Corporate social responsibility in Brazil and India

Directory of Open Access Journals (Sweden)

Mônica Cavalcanti Sá de Abreu

2015-05-01

Full Text Available This article evaluates corporate social responsibility strategies and efforts to implement them in a Brazilian oil and gas multinational and an Indian steel multinational. Qualitative research was conducted through interviews with executives of both companies, and a content analysis and comparison of approaches to corporate social responsibility and engagement with stakeholders were made. The evidence from this research shows that the type of corporate social responsibility adopted by each company depends on the ethical values, socio-economic environment, legal and institutional framework of the country in which the firm operates.

Blood-brain transfer of Pittsburgh compound B in humans

DEFF Research Database (Denmark)

Gjedde, Albert; Aanerud, Joel; Braendgaard, Hans

2013-01-01

-brain barrier is held to be high but the permeability-surface area product and extraction fractions in patients or healthy volunteers are not known. We used PET to determine the clearance associated with the unidrectional blood-brain transfer of [(11)C]PiB and the corresponding cerebral blood flow rates...... with the observation that numerically, but insignificantly, unidirectional blood-brain clearances are lower and extraction fractions higher in the patients. The evidence of unchanged permeability-surface area products in the patients implies that blood flow changes can be deduced from the unidirectional blood......In the labeled form, the Pittsburgh compound B (2-(4'-{N-methyl-[(11)C]}methyl-aminophenyl)-6-hydroxy-benzothiazole, [(11)C]PiB), is used as a biomarker for positron emission tomography (PET) of brain β-amyloid deposition in Alzheimer's disease (AD). The permeability of [(11)C]PiB in the blood...

ASPECTS REGARDING MECHANICAL PROCESSING OF STEELS FOR MAGNETS, NDFEB BASED

Directory of Open Access Journals (Sweden)

MELANIA TĂMAŞ

2015-05-01

Full Text Available This paper presents experimental research concerning the behavior on cutting by turning of steels for magnets NdFeB based. In this context, cutting by rough turning of steels magnet neodymium and boron ferrite based were performed. Turning processing with the values of the cutting parameters recommended by European Union and Sandvik Coromant company rules, taking into account the chemical composition of the processed material and cutting tool were performed. The tables have been drawn up with different values of the cutting parameters. By comparing these data it can be concluded that steels for permanent magnets, NdFeB based have acceptable behavior, the process by rough turning. A full assessment of the optimization of the cutting by turning process of steels for permanent magnet, NdFeB base will result from subsequent experimental research that will take into account the wear of cutting tools and quality (roughness of processed surface.

Niobium Application, Metallurgy and Global Trends in Pressure Vessel Steels

Science.gov (United States)

Jansto, Steven G.

Niobium-containing high strength steel materials have been developed for a variety of pressure vessel applications. Through the application of these Nb-bearing steels in demanding applications, the designer and end user experience improved toughness at low temperature, excellent fatigue resistance and fracture toughness and excellent weldability. These enhancements provide structural engineers the opportunity to further improve the pressure vessel design and performance. The Nb-microalloy alloy designs also result in reduced operational production cost at the steel operation, thereby embracing the value-added attribute Nb provides to both the producer and the end user throughout the supply chain. For example, through the adoption of these Nb-containing structural materials, several design-manufacturing companies are considering improved designs which offer improved manufacturability, lower overall cost and better life cycle performance.

Testing of the 3M Company Composite Conductor

Energy Technology Data Exchange (ETDEWEB)

Stovall, John P [ORNL; Rizy, D Tom [ORNL; Kisner, Roger A [ORNL

2010-10-01

The 3M Company has developed a high-temperature low-sag conductor referred to as Aluminum-Conductor Composite-Reinforced or ACCR. The conductor uses an aluminum metal matrix material to replace the steel in conventional conductors. The objective of this work is to accelerate the commercial acceptance by electric utilities of this new conductor design by testing four representative conductor classes in controlled conditions. A unique facility called the Powerline Conductor Accelerated Testing (PCAT) Facility was built at ORNL for testing overhead conductors. The PCAT has been uniquely designed for testing overhead bare transmission line conductors at high currents and temperatures after they have been installed and tensioned to the manufacturer's specifications. The ability to operate a transmission line conductor in this manner does not exist elsewhere in the United States. Four classes of ACCR cable designed by the 3M Company have been successfully test at ORNL small, medium, large and small/compact. Based on these and other manufacturer tests, the 3M Company has successfully introduced the ACCR into the commercial market and has completed over twenty installations for utility companies.

The spatial concentration of dust emissions measured by using 3D scanning lidar in the open storage yards of steel-making company

Science.gov (United States)

Chiang, Chih-Wei; Chiang, Hong-Wei; Chou, Huann-Ming; Sun, Shu-Huang; Lee, Jiann-Shen

2017-06-01

The wind-blown dust emissions frequently occur in the open storage yards of steel-making companies. Tracking the dust source and monitoring their dispersion are rather difficult. This type of open-air storage yards poses many environmental hazards. The 3-D scanning lidar system is effective in environmental monitoring (e.g., dust) with high temporal and spatial resolution, which is lacking in traditional ground-based measurement. The objective of this paper is to make an attempt for the flux estimation of dust concentration by using lidar system. Further, we investigate the dynamical process of dust and their relationship with local air quality monitoring data. The results show that the material storage erosion by wind ( 3.6 m/s) could cause dust to elevate up to 20m height above the material storage, and produces the flux of dust around 674 mg/s. The flux of dust is proportional to the dust mass concentration (PM10) measured by commercial ambient particular monitors.

Basic investigation on promotion of joint implementation in fiscal 2000. Energy saving projects at two steel making companies in Fushun City in China; 2000 nendo kyodo jisshi nado suishin kiso chosa hokokusho. Chugoku Fushun shi ni okeru tekko gaisha 2 sha no shoene project chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2001-03-01

With an objective of saving energy and reducing greenhouse gas emission, investigations and discussions were given on two steel making companies in China. Discussions were given for Fushun Special Steel Co., Ltd. on abolishment and unification of four electric furnaces into two new electric furnaces, and for Fushun New Steel Co., Ltd. on installation of a granulation reinforcing facility, a segregation reinforcing device, and cooler waste heat recovery boilers for the sintering machine, installation of sensors including the waste gas oxygen concentration meter, adoption of a process computer, and optimization of the furnace temperature patterns for the heating furnace. As a result of the discussions, it was revealed that the unit requirement for electric power used at Fushun Special Steel can be reduced largely, and so can the fuel used at Fushun New Steel. The annual energy saving effect would be about 500 million yen relative to the investment amount of 2.8 billion yen at Fushun Special Steel, and about 400 million yen relative to the investment amount of about 400 million yen at Fushun New Steel. The greenhouse gas emission would be reduced annually by 40,000 t-CO2 and 60,000 t-CO2 respectively. Fushun Special Steel will execute an international bid in May this year. (NEDO)

75 FR 10207 - Certain Cut-to-Length Carbon-Quality Steel Plate From the Republic of Korea: Final Results of...

Science.gov (United States)

2010-03-05

...-Quality Steel Plate From the Republic of Korea: Final Results of Antidumping Duty Administrative Review... cut-to-length carbon-quality steel plate from the Republic of Korea and the intent to rescind the... 1, 2008, through January 31, 2009. We have rescinded the review with respect to one company and we...

Alternative Fuels Data Center: Pittsburgh Livery Company Transports

Science.gov (United States)

hybrid, propane, and natural gas vehicles to transport customers. For information about this project Biodiesel Aug. 26, 2017 Photo of a car Idaho Surges Ahead with Electric Vehicle Charging Aug. 4, 2017 Photo a transit bus America's Largest Home Runs on Biodiesel in North Carolina June 9, 2017 Photo of a bus

Test report for core drilling ignitability testing

International Nuclear Information System (INIS)

Witwer, K.S.

1996-01-01

Testing was carried out with the cooperation of Westinghouse Hanford Company and the United States Bureau of Mines at the Pittsburgh Research Center in Pennsylvania under the Memorandum of Agreement 14- 09-0050-3666. Several core drilling equipment items, specifically those which can come in contact with flammable gasses while drilling into some waste tanks, were tested under conditions similar to actual field sampling conditions. Rotary drilling against steel and rock as well as drop testing of several different pieces of equipment in a flammable gas environment were the specific items addressed. The test items completed either caused no ignition of the gas mixture, or, after having hardware changes or drilling parameters modified, produced no ignition in repeat testing

A study on environmental pollution monitoring and occupational health in the Capital Iron and Steel Company, Beijing, China, using nuclear and related analytical techniques

International Nuclear Information System (INIS)

Chai Zhifang; Qian Qinfang; Feng Xiangqian; Ding Wenjun; Kuang Minxu; Wang Hongyu; Zhang Yongchen

2000-01-01

Since the First Research Coordination Meeting in Vienna, 20-24 October 1997, on the CRP on Assessment of Levels and Health-effects of Airborne Particulate Matter in Mining, Metal Refining and Metal Working Industries using Nuclear and related Analytical Techniques, our research group has completed the work plan defined by the contract with the Agency, including: (1) collection of airborne particulate, plant and soil samples from sites around the Capital Iron and Steel Company and of human hair, urine, and blood samples from the exposed workers and the control group; (2) validation of the analytical methods (NAA, XRF, SRXRF, JCP-AES etc.) by analyzing appropriate reference materials and by participating in relevant Agency's quality assurance exercises; and (3) analysis of part of the collected samples and preliminary discussion on the available analytical results. Finally, plan for future work was outlined as well. (author)

Feasibility study of utilizing solar furnace technology in steel making industry

Energy Technology Data Exchange (ETDEWEB)

Abbaspoursani, K. [The Faculty of Mechanical Engineering, Takestan Islamic Azad University (Iran, Islamic Republic of)], Email: a.abbaspour@tiau.ac.ir; Tofigh, A.A.; Nahang Toudeshki, S.; Hadadian, A. [Department of Energy, Materials and Energy Research Center (Iran, Islamic Republic of)], Email: Ali.A.Tofigh@gmail.com, email: toudeshki@hotmail.com, email: Arash.Hadadian@gmail.com; Farahmandpour, B. [Iranian Fuel Conservation company (Iran, Islamic Republic of)], Email: farahmandpour@gmail.com

2011-07-01

In Iran, the casting industry consumes 33.6% of electricity production, and most of this electricity is used in the melting process. Currently, scrap preheating is done using electric arc furnaces and the aim of this study is to assess the feasibility of replacing electric arc furnaces with solar furnaces. The performance of solar furnaces in the Iran Alloy Steel Company under Yazd climate conditions was studied. It was found that the solar irradiation time and solar insulation are sufficient to operate a solar furnace with the capacity to preheat 250 thousand tons per year of scrap to 500 degrees celsius. Results showed that such a furnace would decrease energy consumption by 40 GWh per year and that it would take 5 years to return the investment. This study demonstrated that operating a solar furnace in the Iran Alloy Steel Company under Yazd climate conditions is feasible and would result in economic and environmental benefits.

Fiscal 1999 technical survey report. Green Helmet Project (China, Sintering in steel industry); 1999 nendo green helmet jigyo (Chugoku seitetsugyo shoketsu) chosa hokokusho

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

A sinter cooler waste heat recovery system was installed and put to use at Taiyuan Iron and Steel Company in 1997. For the popularization of the system and technology, installation feasibility studies were conducted for Chungching Iron and Steel Company, Laiwu Iron and Steel, and Chiuchuan Iron and Steel Company. At Laiwu, studies were under way for the adoption of a China-manufactured system. At Chungching and Chiuchuan, there was a strong will to accept Japanese systems. Although a full investment/profit analysis including the cost of facilities remains to be carried out, it was concluded that the two steelmaking plants would be worth investment. The problems were how to raise funds and how much to invest. Although the system was simple and inexpensive under a Chinese design and was in a fairly wide use, it was found that it was not necessarily sufficient in heat recovering performance, service life, and capacity. A level of steam production to enable recovery in the form of electric power would be difficult to achieve, and the use of the resultant power would be limited only to in-house consumption of a small scale. (NEDO)

Experimental elementary particle physics at the University of Pittsburgh: Progress report, April 1, 1987-March 31, 1988

International Nuclear Information System (INIS)

Cleland, W.E.; Coon, D.D.; Engels, E. Jr.; Shepard, P.F.; Thompson, J.A.

1987-12-01

This paper discusses research activity at the University of Pittsburgh in experimental elementary particle physics. The three main tasks included are: Study of lepton production at the SPS and study of large P/sub T/ direct photon production at the ISR; Direct photon production at the Fermi Tevatron; and Search for fractional charge particles in semiconductors

49 CFR Appendix A to Part 215 - Railroad Freight Car Components

Science.gov (United States)

2010-10-01

.... Arch bar type. 2. Truck with cast steel pedestal side frame, short wheel base, and no bolster. H.Truck... identification mark or pattern number. I.1.Truck side frames: A side frame with one of the following pattern... TF-5100 7323 F-420 21362 (cast prior to June 1941) Pittsburgh steel foundry Scullin steel Bettendorf...

[Relationship between shift work and overweight/obesity in male steel workers].

Science.gov (United States)

Xiao, M Y; Wang, Z Y; Fan, H M; Che, C L; Lu, Y; Cong, L X; Gao, X J; Liu, Y J; Yuan, J X; Li, X M; Hu, B; Chen, Y P

2016-11-10

Objective: To investigate the relationship between shift work and overweight/obesity in male steel workers. Methods: A questionnaire survey was conducted among the male steel workers selected during health examination in Tangshan Steel Company from March 2015 to March 2016. The relationship between shift work and overweight/obesity in the male steel workers were analyzed by using logistic regression model and restricted cubic splinemodel. Results: A total of 7 262 male steel workers were surveyed, the overall prevalence of overweight/obesitywas 64.5% (4 686/7 262), the overweight rate was 34.3% and the obesity rate was 30.2%, respectively. After adjusting for age, educational level and average family income level per month by multivariable logistic regression analysis, shift work was associated with overweight/obesity and obesity in the male steel workers. The OR was 1.19(95% CI : 1.05-1.35) and 1.15(95% CI : 1.00-1.32). Restricted cubic spline model analysis showed that the relationship between shift work years and overweight/obesity in the male steel workers was a nonlinear dose response one (nonlinear test χ 2 =7.43, P shift work years and obesity in the male steel workers was a nonlinear dose response one (nonlinear test χ 2 =10.48, P Shift work was associated with overweight and obesity in the male steel workers, and shift work years and overweight/obesity had a nonlinear relationship.

Showdown in Steel City

Science.gov (United States)

SILVERMAN, ED

2012-01-01

Healthcare reform is encouraging the vertical integration of payers and providers. How far can this go in any one market before such efforts risk being deemed illegal? Pittsburgh provides a case study. PMID:23091428

Male mental health problems, psychopathy, and personality traits: key findings from the first 14 years of the Pittsburgh Youth Study.

Science.gov (United States)

Loeber, R; Farrington, D P; Stouthamer-Loeber, M; Moffitt, T E; Caspi, A; Lynam, D

2001-12-01

This paper reviews key findings on juvenile mental health problems in boys, psychopathy, and personality traits, obtained in the first 14 years of studies using data from the Pittsburgh Youth Study. This is a study of 3 samples, each of about 500 boys initially randomly drawn from boys in the 1st, 4th, and 7th grades of public schools in Pittsburgh. The boys have been followed regularly, initially each half year, and later at yearly intervals. Currently, the oldest boys are about 25 years old, whereas the youngest boys are about 19. Findings are presented on the prevalence and interrelation of disruptive behaviors, ADHD, and depressed mood. Results concerning risk factors for these outcomes are reviewed. Psychological factors such as psychopathy, impulsivity, and personality are described. The paper closes with findings on service delivery of boys with mental health problems.

Detecting privatization factors on promoting exports of steel companies

Directory of Open Access Journals (Sweden)

Seyed Mohsen SeyedAliAkbar

2016-05-01

Full Text Available Privatization is considered as the transfer of business from the government to the private sector. This process is often accomplished in an attempt to reduce the size of government, increase the productivity and export activities. There is no doubt that in an export oriented economy, government tries to promote expert based activities by making necessary changes on rules and regulations. This paper presents an empirical investigation to determine important factors on promoting export in Iran. The study designs a questionnaire in Likert scale and distributes it among some experts active in steel industry. Kaiser-Meyer-Olkin Measure of Sampling Adequacy is equal to 0.839 and Bartlett's Test of Sphericity yields an approximation Chi-Square value of 2485.02 (Sig. = 0.000, df = 276. Using principle component analysis with Varimax rotation, the study has detected five important factors including human resources development, productivity management, marketing management, creating competitive environment and building necessary infrastructures, which influence the most on export activities.

The innovation process in a company supplying inputs for steel marketmetallurgical world market: a case study at Alpha S/A

Directory of Open Access Journals (Sweden)

Gleiciane Ferreira Botta

2015-06-01

Full Text Available This research investigates and analyzes the innovation process in a mining company supplying inputs for the global steel-metallurgical market. The analysis model was structured into four categories originated in the innovation process as the assumptions by Davila et al. (2007, to know: (i strategic and innovation models, (ii factors that can influence the implementation of the innovation, (iii management systems and/or tools, (iv indicators, metrics and results. A qualitative research strategy was based on a study of a single case and three criteria were used to judge the quality of research: construct validity, external validity and reliability. Multiple sources of evidence were used (interviews, documents and observation and data analysis observed three stages namely: (a data reduction, (b display, or exposition of data, (c checking/ conclusions based on interferences from evidences or premise. The results confirmed the existence of an unstructured and informal innovation process meticulously described from four elements of the analysis model. The findings point to a strategy and innovation model still in early stages of maturity, as well as execution influenced by structural and socio-behavioral issues.

Toughness of 2,25Cr-1Mo steel and weld metal

Science.gov (United States)

Acarer, Mustafa; Arici, Gökhan; Acar, Filiz Kumdali; Keskinkilic, Selcuk; Kabakci, Fikret

2017-09-01

2,25Cr-1Mo steel is extensively used at elevated temperature structural applications in fossil fire power plants for steam pipes, nozzle chambers and petrochemical industry for hydrocracking unit due to its excellent creep resistance and good redundant to oxidation. Also they should have acceptable weldability and toughness. The steels are supplied in quenched and tempered condition and their welded components are subjected to post-weld heat treatment (PWHT). Tempering process is carried out at 690-710°C to improve toughness properties. However they are sensitive to reheat cracking and temper embrittlement. To measure temper embrittlement of the steels and their weld metal, temper embrittlement factor and formula (J factor - Watanabe and X formula- Bruscato) are used. Step cooling heat treatment is also applied to determine temper embrittlement. In this study, toughness properties of Cr Mo (W) steels were reviewed. Also transition temperature curves of 2,25Cr-1Mo steel and its weld metal were constructed before and after step cool heat treatment as experimental study. While 2,25Cr-1Mo steel as base metal was supplied, all weld metal samples were produced in Gedik Welding Company. Hardness measurements and microstructure evaluation were also carried out.

Sino-U.S. partnerships in research, education, and patient care: The experience of the University of Pittsburgh and UPMC.

Science.gov (United States)

Levine, Arthur S; McDonald, Margaret C; Bogosta, Charles E

2017-10-01

In 2011, the University of Pittsburgh School of Medicine (UPSOM) and Tsinghua University formed a partnership to further the education of Tsinghua medical students. These students come to UPSOM as visiting research scholars for two years of their eight-year MD curriculum. During this time, the students, who have completed four years at Tsinghua, work full-time in medical school laboratories and research programs of their choice, essentially functioning as graduate students. In their first two months in Pittsburgh, the scholars have a one-week orientation to biomedical research, followed by two-week rotations in four labs selected on the basis of the scholars' scientific interests, after which they choose one of these labs for the remainder of the two years. Selected labs may be in basic science departments, basic science divisions of clinical departments, or specialized centers that focus on approaches like simulation and modeling. The Tsinghua students also have a brief exposure to clinical medicine. UPSOM has also formed a similar partnership with Central South University Xiangya School of Medicine in Changsha, Hunan Province. The Xiangya students come to UPSOM for two years of research training after their sixth year and, thus, unlike the Tsinghua students, have already completed their clinical rotations. UPSOM faculty members have also paved the way for UPMC (University of Pittsburgh Medical Center), UPSOM's clinical partner, to engage with clinical centers in China. Major relationships involving advisory, training, managerial, and/or equity roles exist with Xiangya International Medical Center, KingMED Diagnostics, First Chengmei Medical Industry Group, and Macare Women's Hospital. Both UPSOM and UPMC are actively exploring other clinical and academic opportunities in China.

Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific Design Methodology

Energy Technology Data Exchange (ETDEWEB)

Muralidharan, G.; Sikka, V.K.; Pankiw, R.I.

2006-04-15

The goal of this program was to increase the high-temperature strength of the H-Series of cast austenitic stainless steels by 50% and upper use temperature by 86 to 140 F (30 to 60 C). Meeting this goal is expected to result in energy savings of 38 trillion Btu/year by 2020 and energy cost savings of $185 million/year. The higher strength H-Series of cast stainless steels (HK and HP type) have applications for the production of ethylene in the chemical industry, for radiant burner tubes and transfer rolls for secondary processing of steel in the steel industry, and for many applications in the heat-treating industry. The project was led by Duraloy Technologies, Inc. with research participation by the Oak Ridge National Laboratory (ORNL) and industrial participation by a diverse group of companies. Energy Industries of Ohio (EIO) was also a partner in this project. Each team partner had well-defined roles. Duraloy Technologies led the team by identifying the base alloys that were to be improved from this research. Duraloy Technologies also provided an extensive creep data base on current alloys, provided creep-tested specimens of certain commercial alloys, and carried out centrifugal casting and component fabrication of newly designed alloys. Nucor Steel was the first partner company that installed the radiant burner tube assembly in their heat-treating furnace. Other steel companies participated in project review meetings and are currently working with Duraloy Technologies to obtain components of the new alloys. EIO is promoting the enhanced performance of the newly designed alloys to Ohio-based companies. The Timken Company is one of the Ohio companies being promoted by EIO. The project management and coordination plan is shown in Fig. 1.1. A related project at University of Texas-Arlington (UT-A) is described in Development of Semi-Stochastic Algorithm for Optimizing Alloy Composition of High-Temperature Austenitic Stainless Steels (H-Series) for Desired

ADVANTAGES OF RAPID METHOD FOR DETERMINING SCALE MASS AND DECARBURIZED LAYER OF ROLLED COIL STEEL

Directory of Open Access Journals (Sweden)

E. V. Parusov

2016-08-01

Full Text Available Purpose. To determine the universal empirical relationships that allow for operational calculation of scale mass and decarbonized layer depth based on the parameters of the technological process for rolled coil steel production. Methodology. The research is carried out on the industrial batches of the rolled steel of SAE 1006 and SAE 1065 grades. Scale removability was determined in accordance with the procedure of «Bekaert» company by the specifi-cations: GA-03-16, GA-03-18, GS-03-02, GS-06-01. The depth of decarbonized layer was identified in accordance with GOST 1763-68 (M method. Findings. Analysis of experimental data allowed us to determine the rational temperature of coil formation of the investigated steel grades, which provide the best possible removal of scale from the metal surface, a minimal amount of scale, as well as compliance of the metal surface color with the require-ments of European consumers. Originality. The work allowed establishing correlation of the basic quality indicators of the rolled coil high carbon steel (scale mass, depth of decarbonized layer and inter-laminar distance in pearlite with one of the main parameters (coil formation temperature of the deformation and heat treatment mode. The re-sulting regression equations, without metallographic analysis, can be used to determine, with a minimum error, the quantitative values of the total scale mass, depth of decarbonized layer and the average inter-lamellar distance in pearlite of the rolled coil high carbon steel. Practical value. Based on the specifications of «Bekaert» company (GA-03-16, GA-03-18, GS-03-02 and GS-06-01 the method of testing descaling by mechanical means from the surface of the rolled coil steel of low- and high-carbon steel grades was developed and approved in the environment of PJSC «ArcelorMittal Kryvyi Rih». The work resulted in development of the rapid method for determination of total and remaining scale mass on the rolled coil steel

Radon concentrations inside public and commercial buildings in the Pittsburgh area

Energy Technology Data Exchange (ETDEWEB)

Cohen, B L; Kulwicki, D R; Warner, Jr, K R; Grassi, C L

1984-09-01

Radon concentrations in ambient air from numerous schools, stores and other public and commercial buildings in the Pittsburgh, PA, area were measured by grab sampling. This is more appropriate than using long-term integrating monitors because of the correlation between times of occupancy and Rn levels. Results indicate that Rn concentrations in these buildings are nearly an order of magnitude less than in homes, and not much higher than outdoors. Variations among sites is also much less than for homes, probably because there is less variability in ventilation and building maintenance practices. Colleges and universities have somewhat higher Rn levels and a larger degree of variability than commercial buildings or hospitals. There was no indication of higher Rn levels in cold weather than in warm weather, or of correlations with the age of the building.

Radon concentrations inside public and commercial buildings in the Pittsburgh area.

Science.gov (United States)

Cohen, B L; Kulwicki, D R; Warner, K R; Grassi, C L

1984-09-01

Radon concentrations in ambient air from numerous schools, stores and other public and commercial buildings in the Pittsburgh, PA, area were measured by grab sampling. This is more appropriate than using long-term integrating monitors because of the correlation between times of occupancy and Rn levels. Results indicate that Rn concentrations in these buildings are nearly an order of magnitude less than in homes, and not much higher than outdoors. Variations among sites is also much less than for homes, probably because there is less variability in ventilation and building maintenance practices. Colleges and universities have somewhat higher Rn levels and a larger degree of variability than commercial buildings or hospitals. There was no indication of higher Rn levels in cold weather than in warm weather, or of correlations with the age of the building.

Forecasting of steel consumption with use of nearest neighbors method

Directory of Open Access Journals (Sweden)

Rogalewicz Michał

2017-01-01

Full Text Available In the process of building a steel construction, its design is usually commissioned to the design office. Then a quotation is made and the finished offer is delivered to the customer. Its final shape is influenced by steel consumption to a great extent. Correct determination of the potential consumption of this material most often determines the profitability of the project. Because of a long waiting time for a final project from the design office, it is worthwhile to pre-analyze the project’s profitability and feasibility using historical data on already realized orders. The paper presents an innovative approach to decision-making support in one of the Polish construction companies. The authors have defined and prioritized the most important factors that differentiate the executed orders and have the greatest impact on steel consumption. These are, among others: height and width of steel structure, number of aisles, type of roof, etc. Then they applied and adapted the method of k-nearest neighbors to the specificity of the discussed problem. The goal was to search a set of historical orders and find the most similar to the analyzed one. On this basis, consumption of steel can be estimated. The method was programmed within the EXPLOR application.

Recent Niobium Developments for High Strength Steel Energy Applications

Science.gov (United States)

Jansto, Steven G.

Niobium-containing high strength steel materials have been developed for oil and gas pipelines, offshore platforms, nuclear plants, boilers and alternative energy applications. Recent research and the commercialization of alternative energy applications such as windtower structural supports and power transmission gear components provide enhanced performance. Through the application of these Nb-bearing steels in demanding energy-related applications, the designer and end user experience improved toughness at low temperature, excellent fatigue resistance and fracture toughness and excellent weldability. These enhancements provide structural engineers the opportunity to further improve the structural design and performance. For example, through the adoption of these Nb-containing structural materials, several design-manufacturing companies are initiating new windtower designs operating at higher energy efficiency, lower cost, and improved overall material design performance.

[Proceedings of the] International Conference on Educational Data Mining (EDM) (3rd, Pittsburgh, PA, July 11-13, 2010)

Science.gov (United States)

Baker, Ryan S. J. d., Ed.; Merceron, Agathe, Ed.; Pavlik, Philip I., Jr., Ed.

2010-01-01

The Third International Conference on Data Mining (EDM 2010) was held in Pittsburgh, PA, USA. It follows the second conference at the University of Cordoba, Spain, on July 1-3, 2009 and the first edition of the conference held in Montreal in 2008, and a series of workshops within the AAAI, AIED, EC-TEL, ICALT, ITS, and UM conferences. EDM 2011…

Behaviour of fibre reinforced concrete using steel slag coarse aggregate produced in Qatar

Directory of Open Access Journals (Sweden)

Alnahhal Wael

2017-01-01

Full Text Available The state of Qatar suffers from the shortage of natural resources needed for concrete production. Therefore, it is essential to investigate the feasibility of using by-product recycled materials as aggregates to maintain the concrete construction industry. Several types of recyclable materials are currently used in concrete. One of the potential resources of recycled concrete is steel slag. Knowing that Steel slag is the most significant solid waste generated by Qatar Steel Company in Qatar, replacing of natural coarse aggregate with steel slag aggregate will have a significant environmental and economic impact to the state of Qatar. This paper presents the compression and flexural test results of different concrete mixes made of steel slag coarse aggregate combined with a newly developed basalt chopped fibres. The parameters investigated included the volume fraction of the fibre used and the type of coarse aggregates (natural aggregates “Gabbro” and steel slag aggregates. Plain concrete specimens containing natural coarse aggregates and steel slag aggregates with no fibres added were also tested to serve as control. Test results showed that adding the basalt chopped fibres to the concrete mixes enhanced their flexural tensile strengths at different percentages. In addition, the compressive strength of concrete made with steel slag aggregate was higher than that made with natural gabbro aggregate. Test results clearly showed that steel slag aggregates can be used as sustainable and eco-friendly alternative materials in concrete structures.

Technology of Welding Joints Mixed with Duplex Steel

Directory of Open Access Journals (Sweden)

Słania J.

2016-03-01

Full Text Available Results of the examinations of sample plates of mixed joints with the duplex steel were discussed. Examinations were taken on the sample plates of mixed joints of sheet plates type P355NL1 and X2CrNiMoN22-5-3 welded by the flux-cored wire DW-329A by the Kobelco company of the following category T 22 9 3 NL RC/M3 in the gas shroud M21 (Ar+18%CO2 (plate no.1, and nickel covered electrodes E Ni 6082 by the Böhler company (plate no. 2. Results of the side bend test of welded joint, transverse tensile test, stretching of the weld metal, impact strength, micro and macroscopic metallographic examinations, and measurements of the delta ferrite content were presented.

A computer system to aid in the planning of steel rolls cuts

Directory of Open Access Journals (Sweden)

Nelson Maculan

2007-03-01

Full Text Available The planning of cuts in steel rolls is a combinatory optimization problem. Some companies of the metallurgical industry use the steel cold lamination process so that it acquires the necessary physical properties. In this case, the cutting patterns should consist of compartments of items compatible with the lamination process, hindering the task of cuts planning. A compartment represents an intermediate roll to be laminated, so that it is possible to combine intermediate rolls with different lamination needs in the same roll of the stock. In this work the prototype of the RollCut System will be presented to aid with the cuts planning.

Research and development of austenitic stainless steels for fusion reactors, (1)

International Nuclear Information System (INIS)

1984-11-01

In the alloy development for the first wall of blanket structure of the fusion experimental reactor and a subsequent reactor of Tokamak type, the prime candidate alloy (PCA) and reference steels were melted and examined on fundamental materials properties under a contract between JAERI and iron and steel companies, and under NRIM-JAERI collaborative work during the fiscal years of 1981 and 1982. All the alloys showed reasonable performance on mechanical properties, phase stability at elevated temperatures and weldability. The PCA has been proved to be used in controlled water-coolant environment. As to the welding of the PCA, welding rods suitable for TIG and covered arc welding have been selected from several candidate rods. (author)

Travel to Steel Warehouse Inc., Southbend, Indiana. Trip report, May 4, 1995

International Nuclear Information System (INIS)

Hill, N.F.

1995-01-01

On May 4, 1995 the author visited a steel plate and coil, cold reduction facility at Steel Warehouse Inc. located in South Bend, Indiana about 150 miles from Argonne. Some very interesting facts were learned about cold reduction of hot rolled steel during this visit. The company selected is only a cold reduction mill and buys steel from a number of steel producers. The author spent a total of about three hours with these people, and this included a tour of their pickling line, the small cold reduction mill which at present is limited to 15.5 in width maximum, and their large cold reduction mill which produces sheet and coil up to 72 in. wide. Some of the things that were learned, that will have an impact on the production of the Atlas steel plates are given here. (1) Hot rolled coils have some inherent, interesting, characteristics that must be taken into consideration when being cold reduced. (2) The monitoring of the coil thickness is only done along the center line of the coil, this has a serious impact on QC of plates cut from this coil for a number of reasons. (3) Hot rolled coils of steel in this particular instance may come from a number of different sources. This could cause problems if magnetic permeability is a serious issue. It was the author's impression that this facility is fairly typical of what one might expect from any similar facility

Building America Case Study: Evaluating Through-Wall Air Transfer Fans, Pittsburgh, Pennsylvania (Fact Sheet)

Energy Technology Data Exchange (ETDEWEB)

2014-10-01

In this project, Building America team IBACOS performed field testing in a new construction unoccupied test house in Pittsburgh, Pennsylvania to evaluate heating, ventilating, and air conditioning (HVAC) distribution systems during heating, cooling, and midseason conditions. Four air-based HVAC distribution systems were assessed:-a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, a system with transfer fans to the bedrooms, and a system with no ductwork to the bedrooms. The relative ability of each system was considered with respect to relevant Air Conditioning Contractors of America and ASHRAE standards for house temperature uniformity and stability, respectively.

Galvanic Liquid Applied Coating System for Protection of Embedded Steel Surfaces from Corrosion

Science.gov (United States)

Curran, Joseph; MacDowell, Louis; Voska, N. (Technical Monitor)

2002-01-01

The corrosion of reinforcing steel in concrete is an insidious problem for the Kennedy Space Center, government agencies, and the general public. Existing corrosion protection systems on the market are costly, complex, and time-consuming to install, require continuous maintenance and monitoring, and require specialized skills for installation. NASA's galvanic liquid-applied coating offers companies the ability to conveniently protect embedded steel rebar surfaces from corrosion. Liquid-applied inorganic galvanic coating contains one ore more of the following metallic particles: magnesium, zinc, or indium and may contain moisture attracting compounds that facilitate the protection process. The coating is applied to the outer surface of reinforced concrete so that electrical current is established between metallic particles and surfaces of embedded steel rebar; and electric (ionic) current is responsible for providing the necessary cathodic protection for embedded rebar surfaces.

Development of a Coronary Heart Disease Risk Prediction Model for Type 1 Diabetes: The Pittsburgh CHD in Type 1 Diabetes Risk Mode

NARCIS (Netherlands)

Zgibor, J.C.; Ruppert, K.; Orchard, T.J.; Soedamah-Muthu, S.S.; Fuller, J.H.; Chaturvedi, N.; Roberts, M.S.

2010-01-01

Aim - To create a coronary heart disease (CHD) risk prediction model specific to type 1 diabetes. Methods - Development of the model used data from the Pittsburgh Epidemiology of Diabetes Complications Study (EDC). EDC subjects had type 1 diabetes diagnosed between 1950 and 1980, received their

Emerging Energy-efficiency and Carbon Dioxide Emissions-reduction Technologies for the Iron and Steel Industry

Energy Technology Data Exchange (ETDEWEB)

Hasanbeigi, Ali [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Price, Lynn [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Energy Analysis and Environmental Impacts Dept.. China Energy Group; Arens, Marlene [Fraunhofer Inst. for Systems and Innovation Research (ISI), Karlsruhe (Germany)

2013-01-31

Iron and steel manufacturing is among the most energy-intensive industries and accounts for the largest share, approximately 27 percent, of global carbon dioxide (CO₂) emissions from the manufacturing sector. The ongoing increase in world steel demand means that this industry’s energy use and CO₂ emissions continue to grow, so there is significant incentive to develop, commercialize and adopt emerging energy-efficiency and CO₂ emissions-reduction technologies for steel production. Although studies from around the world have identified a wide range of energy-efficiency technologies applicable to the steel industry that have already been commercialized, information is limited and/or scattered regarding emerging or advanced energy-efficiency and low-carbon technologies that are not yet commercialized. This report consolidates available information on 56 emerging iron and steel industry technologies, with the intent of providing a well-structured database of information on these technologies for engineers, researchers, investors, steel companies, policy makers, and other interested parties. For each technology included, we provide information on energy savings and environmental and other benefits, costs, and commercialization status; we also identify references for more information.

Iron and steel industry and non-ferrous metal production - the electrical energy consumption and energy efficiency

International Nuclear Information System (INIS)

Blazhev, Blagoja; Sofeski, Slobodan

2002-01-01

Companies of iron and steel industry and non-ferrous metal production are the largest individual consumers of electricity and other forms of energy. This paper presents the electricity consumption in the last twenty-year period as well as data for their contribution in creating the gross domestic product (GDP) and engagement of labor force in the country. For some of the companies there is data for energy efficiency (kWh/t i.e. MJ/t) in last five years. (Original)

Simplified Space Conditioning in Low-Load Homes: Results from Pittsburgh, Pennsylvania, New Construction Unoccupied Test House

Energy Technology Data Exchange (ETDEWEB)

Poerschke, A.; Stecher, D.

2014-06-01

Field testing was performed in a new construction unoccupied test house in Pittsburgh, Pennsylvania. Four air-based heating, ventilation, and air conditioning distribution systems--a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, a system with transfer fans to the bedrooms, and a system with no ductwork to the bedrooms--were evaluated during heating, cooling, and midseason conditions. The relative ability of each system was assessed with respect to relevant Air Conditioning Contractors of America and ASHRAE standards for house temperature uniformity and stability, respectively.

Simplified Space Conditioning in Low-Load Homes: Results from Pittsburgh, Pennsylvania, New Construction Unoccupied Test House

Energy Technology Data Exchange (ETDEWEB)

Poerschke, Andrew [IBACOS, Inc., Pittsburgh, PA (United States); Stecher, Dave [IBACOS, Inc., Pittsburgh, PA (United States)

2014-06-01

Field testing was performed in a new construction unoccupied test house in Pittsburgh, PA. Four air-based heating, ventilation, and air conditioning distribution systems—a typical airflow ducted system to the bedrooms, a low airflow ducted system to the bedrooms, a system with transfer fans to the bedrooms, and a system with no ductwork to the bedrooms—were evaluated during heating, cooling, and midseason conditions. The relative ability of each system was assessed with respect to relevant Air Conditioning Contractors of America and ASHRAE standards for house temperature uniformity and stability, respectively.

It was the demonstration of industrial steel production capacity ferritic-martensitic Spanish ASTURFER scale demand ITER

International Nuclear Information System (INIS)

Coto, R.; Serrano, M.; Moran, A.; Rodriguez, D.; Artimez, J. A.; Belzunce, J.; Sedano, L.

2013-01-01

Reduced Activation Ferritic-Martensitic (RAFM) structural steels are considered as candidate materials with notable possibilities to be incorporated to fusion reactor ITER, nowadays under construction, and future fusion reactor DEMO, involving a notable forecasting of supply materials, with a considerable limitation due to the few number of furnishes currently on the market. The manufacture at an industrial scale of the ASTURFER steel, developed at laboratory scale by ITMA Materials Technology and the Structural Materials Division of the Technology Division of CIEMAT would be a significant business opportunity for steelwork companies.

Effects of the new fast forward rotating five-shift roster at a Dutch steel company

NARCIS (Netherlands)

Klein Hesselink, J.; Leede, J. de; Goudswaard, A.

2010-01-01

This article reports a field study of a shift roster change in a large steel producer. The changes in the roster are threefold: (1) from backward rotating to forward rotating; (2) from rather slow (three) to fast rotating (two consecutive shifts); (3) the number of days off after the night shifts

Nippon Steel Corp.: Carbon fiber seat business of Tonen Corp., formal bribery Nippon Steel Corp; Tonen no tanso seni shito jigyo. Shinnittetsu ga seishiki baishu

Energy Technology Data Exchange (ETDEWEB)

NONE

1998-02-28

Nippon Steel Corp. and Tonen Corp. announced that it signed the transfer contract of carbon fiber seat business on December 1, 1998. (Nittetsu composite) is established as a business company of carbon fiber compound material fitted to the existent business, and it makes use of the multiplier effect of the business integration, and the new day iron which purchased a business from Tonen Corp. works for the scale expansion. (translated by NEDO)

1992 Effluent and environmental monitoring report for the Bettis Atomic Power Laboratory Pittsburgh Site

International Nuclear Information System (INIS)

1992-01-01

The results of the radiological and non-radiological environmental monitoring programs for 1992 at the Bettis-Pittsburgh Site are presented. The results obtained from the monitoring programs demonstrate that the existing procedures ensured that environmental releases during 1992 were in accordance with applicable Federal and State regulations. Evaluation of the environmental data indicates that operation of the Laboratory continues to have no adverse effect on the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Laboratory operations demonstrated that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency and the Department of Energy

1992 Effluent and environmental monitoring report for the Bettis Atomic Power Laboratory Pittsburgh Site

Energy Technology Data Exchange (ETDEWEB)

1992-12-31

The results of the radiological and non-radiological environmental monitoring programs for 1992 at the Bettis-Pittsburgh Site are presented. The results obtained from the monitoring programs demonstrate that the existing procedures ensured that environmental releases during 1992 were in accordance with applicable Federal and State regulations. Evaluation of the environmental data indicates that operation of the Laboratory continues to have no adverse effect on the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Laboratory operations demonstrated that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency and the Department of Energy.

Influence of the chemical composition on steel casting performance

Directory of Open Access Journals (Sweden)

Roney Eduardo Lino

2017-01-01

Full Text Available Improving the quality of steel and the steelmaking process has been a matter of routine for metallurgical engineers and steelmaking companies in a demanding market for quality products at highly competitive price. The chemical and temperature adjustment are made during the secondary refining process, as well as the inclusion modification required to product quality, and also the demand for castability accuracy. Continuous casting process is the most used solidification casting process, in which the flow of pouring liquid metal through the submerged entry nozzle is assured by the correct temperature and the formation of liquid inclusion in the casting temperature. Thermocalc and CEQCSI were the software used in this work to assess the effect of carbon, silicon and sulphur in the castability window of the aluminium vs calcium phase diagrams. They have proved to be highly suitable and effective and the results showed that the chemical elements used directly affected the position of the castability window of carbon steel. An analysis of a 0.2%C billet sample using Scanning Electron Microscopy showed that there is a great heterogeneity of inclusions in aluminium-killed and calcium-treated steel.

Technology choice and CDM projects in China: case study of a small steel company in Shandong Province

International Nuclear Information System (INIS)

Kaneko, Shinji; Yonamine, Asaka; Jung, Tae Yong

2006-01-01

Corporate motives and strategies of both investing and hosting country affect the outcomes of a clean development mechanism (CDM) project-who introduces what technology to whom-and result in large differences in economic viability and the CO 2 emission reductions. This is particularly true for steel industry in which steel making consists of many detailed and complex processes, a given strategy could produce cumulative effects of the individual technologies used, leading to large energy savings overall. The objective of this study is to demonstrate some analytical methods that can be used to quantitatively evaluate the impacts of technology selection on the profit performance of CDM projects. Specifically, in this study we analyze a CDM project to introduce energy saving technology from Japan to a small steel manufacturer in China's Shandong Province, and conduct a simulation of the quantitative relationships between various technology options and profitability. Based on these results, we examine the environmental and economic significance of technology selection for CDM projects. To take this further, we then reconsider the profitability of a project as typical FDI activity (i.e., without the CDM), and by comparing this outcome with the CDM case, we clarify the significance and potential of the CDM

Comparison between instrumented precracked Charpy and compact specimen tests of carbon steels

International Nuclear Information System (INIS)

Nanstad, R.K.

1980-01-01

The General Atomic Company High Temperature Gas-Cooled Reactor (HTGR) is housed within a prestressed concrete reactor vessel (PCRV). Various carbon steel structural members serve as closures at penetrations in the vessel. A program of testing and evaluation is underway to determine the need for reference fracture toughness (K/sub IR/) and indexing procedures for these materials as described in Appendix G to Section III, ASME Code for light water reactor steels. The materials of interest are carbon steel forgings (SA508, Class 1) and plates (SA537, Classes 1 and 2) as well as weldments of these steels. The fracture toughness behavior is characterized with instrumented precracked Charpy V-votch specimens (PCVN) - slow-bend and dynamic - and compact specimens (10-mm and 25-mm thicknesses) using both linear elastic (ASTM E399) and elastic-plastic (equivalent Energy and J-Integral) analytical procedures. For the dynamic PCVN tests, force-time traces are analyzed according to the procedures of the Pressure Vessel Research Council (PVRC)/Metal Properties Council (MPC). Testing and analytical procedures are discussed and PCVN results are compared to those obtained with compact specimens

Productivity Improvement in a Steel Industry using Supply Chain Management Technique

Directory of Open Access Journals (Sweden)

Mohammad Reza Soltani

2013-06-01

Full Text Available Cost reduction is one of the methods applied for improving the productivity of organizations. In productivity literature, particularly in nonparametric methods, cost reduction related methods are regarded as input oriented models. This paper presents a Supply Chain Management (SCM model in which purchasing iron ore and coke from different resources, along with production and distribution of steel products were investigated to improve the productivity of a steel making plant in Iran. The model was designed based on a single objective concept with a focus on total cost minimization. The constraints of the model consisted principal restriction concerning mines, coke plant and products. The model was implemented in steel factories (blast furnace affiliated with Iranian Mines and Mining Industries Development and Renovation Organization (IMIDRO.The results showed that the priority for providing iron ore should be given to Iran Central Iron Ore Company (ICIOC which has enough production capacity to satisfy the required ores. The results further suggested that at the best productivity condition, Isfahan steel plant should focus on the beam and bar production. The other plants, i.e. Zagros plant, should focus on L-beam and slab and finally Meibod steel plant should concentrate on slab production. It was also showed that the coke production plants cannot supply the required tonnage of the steel plants. Therefore, some new plants should be established to achieve self-sufficiency in this industry. This model can be used as a support tool for decision-makers at strategic and tactical decision levels.

1999 environmental monitoring report for the Bettis Atomic Power Laboratory, Pittsburgh Site

International Nuclear Information System (INIS)

2000-01-01

The 1999 results for the Bettis-Pittsburgh radiological and nonradiological environmental monitoring programs are presented. The results demonstrate that the existing procedures ensured that releases to the environment during 1999 were in accordance with applicable Federal, State, County, and local regulations. Evaluation of the environmental data indicates that current operations at the Site continue to have no adverse effect on human health and the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrates that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency, the Nuclear Regulatory Commission, and the US Department of Energy. A risk assessment of potentially exposed populations to chemical residues in the environment at the Site demonstrates that these residues do not pose any significant risk to human health or the environment

1997 environmental monitoring report for the Bettis Atomic Power Laboratory, Pittsburgh Site

International Nuclear Information System (INIS)

1997-01-01

The 1997 results for the Bettis-Pittsburgh radiological and nonradiological environmental monitoring programs are presented. The results demonstrate that the existing procedures ensured that releases to the environment during 1997 were in accordance with applicable Federal, State, County, and local regulations. Evaluation of the environmental data indicates tat current operations at the Site continue to have no adverse effect on human health and the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrates that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency, the Nuclear Regulatory Commission, and the US Department of Energy. A risk assessment of potentially exposed populations to chemical residues in the environment at the Site demonstrates that these residues do not pose any significant risk to human health or the environment

Development of Stronger and More Reliable Cast Austenitic Stainless Steels (H-Series) Based on Scientific and Design Methodology

Energy Technology Data Exchange (ETDEWEB)

Pankiw, Roman I; Muralidharan, G. (Murali); Sikka, Vinod K.

2006-06-30

The goal of this project was to increase the high-temperature strength of the H-Series of cast austenitic stainless steels by 50% and the upper use temperature by 86 to 140 degrees fahrenheit (30 to 60 degrees celsius). Meeting this goal is expected to result in energy savings of 35 trillion Btu/year by 2020 and energy cost savings of approximately $230 million/year. The higher-strength H-Series cast stainless steels (HK and HP type) have applications for the production of ethylene in the chemical industry, for radiant burner tubes and transfer rolls for secondary processing of steel in the steel industry, and for many applications in the heat treating industry, including radiant burner tubes. The project was led by Duraloy Technologies, Inc., with research participation by Oak Ridge National Laboratory (ORNL) and industrial participation by a diverse group of companies.

Creating an infrastructure for training in the responsible conduct of research: the University of Pittsburgh's experience.

Science.gov (United States)

Barnes, Barbara E; Friedman, Charles P; Rosenberg, Jerome L; Russell, Joanne; Beedle, Ari; Levine, Arthur S

2006-02-01

In response to public concerns about the consequences of research misconduct, academic institutions have become increasingly cognizant of the need to implement comprehensive, effective training in the responsible conduct of research (RCR) for faculty, staff, students, and external collaborators. The ability to meet this imperative is challenging as universities confront declining financial resources and increasing complexity of the research enterprise. The authors describe the University of Pittsburgh's design, implementation, and evaluation of a Web-based, institution-wide RCR training program called Research and Practice Fundamentals (RPF). This project, established in 2000, was embedded in the philosophy, organizational structure, and technology developed through the Integrated Advanced Information Management Systems grant from the National Library of Medicine. Utilizing a centralized, comprehensive approach, the RPF system provides an efficient mechanism for deploying content to a large, diverse cohort of learners and supports the needs of research administrators by providing access to information about who has successfully completed the training. During its first 3 years of operation, the RPF served over 17,000 users and issued more than 38,000 training certificates. The 18 modules that are currently available address issues required by regulatory mandates and other content areas important to the research community. RPF users report high levels of satisfaction with content and ease of using the system. Future efforts must explore methods to integrate non-RCR education and training into a centralized, cohesive structure. The University of Pittsburgh's experience with the RPF demonstrates the importance of developing an infrastructure for training that is comprehensive, scalable, reliable, centralized, affordable, and sustainable.

Constitutional Law--State Action--Hiring and Promotion Practices of Private University Receiving Public Funds Held State Action--Braden v. University of Pittsburgh.

Science.gov (United States)

New York University Law Review, 1977

1977-01-01

In Braden vs University of Pittsburgh, a female professor filed suit against the University alleging sex discrimination in employment practices. The professor alleged that the school, which received state funds, was, in effect, a state actor and subject to constitutional restraints. This case and two relevant state action cases are discussed. (JMD)

Microbial-Influenced Corrosion of Corten Steel Compared with Carbon Steel and Stainless Steel in Oily Wastewater by Pseudomonas aeruginosa

Science.gov (United States)

Mansouri, Hamidreza; Alavi, Seyed Abolhasan; Fotovat, Meysam

2015-07-01

The microbial corrosion behavior of three important steels (carbon steel, stainless steel, and Corten steel) was investigated in semi petroleum medium. This work was done in modified nutrient broth (2 g nutrient broth in 1 L oily wastewater) in the presence of Pseudomonas aeruginosa and mixed culture (as a biotic media) and an abiotic medium for 2 weeks. The behavior of corrosion was analyzed by spectrophotometric and electrochemical methods and at the end was confirmed by scanning electron microscopy. The results show that the degree of corrosion of Corten steel in mixed culture, unlike carbon steel and stainless steel, is less than P. aeruginosa inoculated medium because some bacteria affect Corten steel less than other steels. According to the experiments, carbon steel had less resistance than Corten steel and stainless steel. Furthermore, biofilm inhibits separated particles of those steels to spread to the medium; in other words, particles get trapped between biofilm and steel.

Development of new corrosion inhibitor tested on mild steel supported by electrochemical study

Science.gov (United States)

Habeeb, Hussein Jwad; Luaibi, Hasan Mohammed; Dakhil, Rifaat Mohammed; Kadhum, Abdul Amir H.; Al-Amiery, Ahmed A.; Gaaz, Tayser Sumer

2018-03-01

Mild steel is a metal which is commonly used in industrials and manufacturing of equipment for most industries round the world. It is cheaper cost compared with the other metals and its durable, hard and easy-to-wear physical properties make it a major choice in the manufacture of equipment parts. The main problem through the uses of mild steel in industry is its resistance against corrosion, especially in acidic solutions. This case led to raise the cost of maintenance of equipment that used mild steel and as a result increased costs for the company. Organic corrosive inhibitors that also act as green chemicals, 4-hydroxybenzylideneaminomethyl-5-ethyl-1,3,4-thiadiazol have been synthesized. This inhibitor is tested as corrosion inhibitor on a mild steel sample MS in 1 M hydrochloric acid solution (HCl) using electrochemical measurements test includes PD (Potentiodynamic), EIS (Electrochemical impedance spectroscopy), OCP (Open circuit potential) and EFM (electrochemical frequency modulation). The obtained results indicate that 4-hydroxybenzylideneaminomethyl-5-ethyl-1,3,4-thiadiazol acts as a good corrosion inhibitor for mild steel sample in HCl solution with efficiency above 90%. Changes in the impedance parameters postulated adsorption on the mild steel specimens' surfaces of, which it going to the formation of protective coating layer. It also shows that 4-hydroxybenzylideneaminomethyl-5-ethyl-1,3,4-thiadiazol corrosion inhibitors are effective in helping to reduce and slow down the corrosion process that occurs on mild steel surface in hydrochloric acid solution. Increase of corrosion inhibitor concentration provides a protective layer of mild steel. However, this protective layer becomes weak when the temperature of the solution increases.

Reflections of Computing Experiences in a Steel Factory in the Early 1960s

Science.gov (United States)

Järvinen, Pertti

We can best see many things from a historical perspective. What were the first pioneers doing in the information technology departments of Finnish manufacturing companies? In early 1960s, I had a special chance to work in a steel industry that had long traditions to use rather advanced tools and methods to intensify their productivity. The first computer in our company had such novel properties as movable disk packs making a direct access of stored data possible. In this paper, we describe the following issues and innovations in some depth. These include (a) transitioning from the punched card machines to a new computer era, (b) using advanced programming language to intensify production of new computer software, (c) drawing pictures by using a line printer, (d) supporting steel making with mathematical software, (e) storing executable programs to the disk memory and calling and moving them from there to the core memory for running, and (f) building a simple report generator. I will also pay attention to the breakthrough in those innovations and in this way demonstrate how some computing solutions were growing at that time.

1993 Effluent and environmental monitoring report for the Bettis Atomic Power Laboratory, Pittsburgh Site

International Nuclear Information System (INIS)

1993-01-01

The results of the radiological and non-radiological environmental monitoring programs for 1993 at the Bettis-Pittsburgh Site are presented. The results obtained from the monitoring programs demonstrate that the existing procedures ensured that environmental releases during 1993 were in accordance with applicable Federal and State regulations. Evaluation of the environmental data indicates that the current operations at the Site continue to have no adverse effect on the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrated that the dose received by any member of the public was well below the most restrictive dose limits established by the US Environmental Protection Agency and the US Department of Energy

1993 Effluent and environmental monitoring report for the Bettis Atomic Power Laboratory, Pittsburgh Site

Energy Technology Data Exchange (ETDEWEB)

1993-12-31

The results of the radiological and non-radiological environmental monitoring programs for 1993 at the Bettis-Pittsburgh Site are presented. The results obtained from the monitoring programs demonstrate that the existing procedures ensured that environmental releases during 1993 were in accordance with applicable Federal and State regulations. Evaluation of the environmental data indicates that the current operations at the Site continue to have no adverse effect on the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrated that the dose received by any member of the public was well below the most restrictive dose limits established by the US Environmental Protection Agency and the US Department of Energy.

Application of lap laser welding technology on stainless steel railway vehicles

Science.gov (United States)

Wang, Hongxiao; Wang, Chunsheng; He, Guangzhong; Li, Wei; Liu, Liguo

2016-10-01

Stainless steel railway vehicles with so many advantages, such as lightweight, antirust, low cost of maintenance and simple manufacturing process, so the production of high level stainless steel railway vehicles has become the development strategy of European, American and other developed nations. The current stainless steel railway vehicles body and structure are usually assembled by resistance spot welding process. The weak points of this process are the poor surface quality and bad airtight due to the pressure of electrodes. In this study, the partial penetration lap laser welding process was investigated to resolve the problems, by controlling the laser to stop at the second plate in the appropriate penetration. The lap laser welding joint of stainless steel railway vehicle car body with partial penetration has higher strength and surface quality than those of resistance spot welding joint. The biggest problem of lap laser welding technology is to find the balance of the strength and surface quality with different penetrations. The mechanism of overlap laser welding of stainless steel, mechanical tests, microstructure analysis, the optimization of welding parameters, analysis of fatigue performance, the design of laser welding stainless steel railway vehicles structure and the development of non-destructive testing technology were systematically studied before lap laser welding process to be applied in manufacture of railway vehicles. The results of the experiments and study show that high-quality surface state and higher fatigue strength can be achieved by the partial penetration overlap laser welding of the side panel structure, and the structure strength of the car body can be higher than the requirements of En12663, the standard of structural requirements of railway vehicles bodies. Our company has produced the stainless steel subway and high way railway vehicles by using overlap laser welding technology. The application of lap laser welding will be a big

Contamination assessment of heavy metals in the soils around Khouzestan Steel Company (Ni, Mn, Pb, Fe, Zn, Cr)

International Nuclear Information System (INIS)

Hormozi Nejad, F.; Rastmanesh, F.; Zarasvandi, A.

2016-01-01

The highest concentrations were found at soil samples 4 and 12. Comparison of heavy metals concentration with unpolluted soil standard indicated that, concentrations of Cr, Zn, Fe, Ni and Pb is higher than that of unpolluted soil standard. In general, Manganese, Chromium, Zinc and Lead are the most important elements that are found in emissions of steel plants. The soil samples near the steel plant and downwind direction have much higher pollution level. The results showed that Mn, Pb and Zn is related to human activity and Cr have geogenic source and Fe and Ni have both geogenic and anthropogenic source in the study area in the city of Ahwaz.

Aircraft Steels

Science.gov (United States)

2009-02-19

component usage. PH 13-8Mo is a precipitation-hardenable martensitic stainless steel combining excellent corrosion resistance with strength. Custom 465 is...a martensitic , age-hardenable stainless steel capable of about 1,724 MPa (250 ksi) UTS when peak-aged (H900 condition). Especially, this steel can...NOTES 14. ABSTRACT Five high strength steels (4340, 300M, AerMet 100, Ferrium S53, and Hy-Tuf) and four stainless steels (High Nitrogen, 13

Steel making

CERN Document Server

Chakrabarti, A K

2014-01-01

"Steel Making" is designed to give students a strong grounding in the theory and state-of-the-art practice of production of steels. This book is primarily focused to meet the needs of undergraduate metallurgical students and candidates for associate membership examinations of professional bodies (AMIIM, AMIE). Besides, for all engineering professionals working in steel plants who need to understand the basic principles of steel making, the text provides a sound introduction to the subject.Beginning with a brief introduction to the historical perspective and current status of steel making together with the reasons for obsolescence of Bessemer converter and open hearth processes, the book moves on to: elaborate the physiochemical principles involved in steel making; explain the operational principles and practices of the modern processes of primary steel making (LD converter, Q-BOP process, and electric furnace process); provide a summary of the developments in secondary refining of steels; discuss principles a...

Slovak companies not pleased by compromise with Brussels

International Nuclear Information System (INIS)

Marcan, P.

2005-01-01

The sale and purchase of carbon dioxide emissions used to be a topic only of interest to environmentalists - until it started to be about money. Industrial associations in Western Europe started fighting for higher quotas earlier than in Slovakia. Initially, Slovak companies were satisfied with the quotas proposed as these did not force them to decrease production, or invest extensively in more environmentally friendly production, or purchase emission permits for exceeding the quotas set. Everything changed after the European Commission approved the Slovak plan in autumn last year. This set a limit 14% lower than the original proposal. The largest Slovak producer of carbon dioxide - U.S.Steel Kosice - challenged the new quotas directly at the European Court of Justice in Luxembourg. But other producers also object. 'The decrease is an unfortunate and strategically bad move for Slovakia,' said the Head of the Environmental Department at Slovenske elektrarne (Slovak Electric), Branislav Mihaly. And added that the Ministry of Environment was fully responsible for this situation. 'Including the political responsibility of Minister Laszlo Miklos,' he added. Given a quota reduction of 14%, he considers it very likely that Slovak Electric will follow the example of the Kosice steel works. The state must allocate the new quotas before the end of February. The Ministry announced that for large sources, it would seek solutions by individual negotiations. For smaller sources there would be a flat rate decrease. In theory, if companies were to take full advantage of the original quotas, the new allocation plan would cost them 40 to 50 mil. EUR (1.6 -2 bill. Slovak crowns). TREND based its calculation on the current market price of emissions - 8-10 EUR/ton of carbon dioxide

2003 Environmental Monitoring Report for the Bettis Atomic Power Laboratory Pittsburgh Site

International Nuclear Information System (INIS)

2003-01-01

The 2003 results for the Bettis-Pittsburgh radiological and nonradiological environmental monitoring programs are presented. The results demonstrate that the existing procedures ensured that releases to the environment during 2003 were in accordance with applicable Federal, State, County, and local regulations. Evaluation of the environmental data indicates that current operations at the Site continue to have no adverse effect on human health and the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrates that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency, the Nuclear Regulatory Commission, and the U.S. Department of Energy. A risk assessment of potentially exposed populations to chemical residues in the environment at the Site demonstrates that any potential risk posed by these residues in much less than the risks encountered in normal everyday life

Prevalence of Clostridium difficile in uncooked ground meat products from Pittsburgh, Pennsylvania.

Science.gov (United States)

Curry, Scott R; Marsh, Jane W; Schlackman, Jessica L; Harrison, Lee H

2012-06-01

The prevalence of Clostridium difficile in retail meat samples has varied widely. The food supply may be a source for C. difficile infections. A total of 102 ground meat and sausage samples from 3 grocers in Pittsburgh, PA, were cultured for C. difficile. Brand A pork sausages were resampled between May 2011 and January 2012. Two out of 102 (2.0%) meat products initially sampled were positive for C. difficile; both were pork sausage from brand A from the same processing facility (facility A). On subsequent sampling of brand A products, 10/19 samples from processing facility A and 1/10 samples from 3 other facilities were positive for C. difficile. The isolates recovered were inferred ribotype 078, comprising 6 genotypes. The prevalence of C. difficile in retail meat may not be as high as previously reported in North America. When contamination occurs, it may be related to events at processing facilities.

Development of new corrosion inhibitor tested on mild steel supported by electrochemical study

Directory of Open Access Journals (Sweden)

Hussein Jwad Habeeb

2018-03-01

Full Text Available Mild steel is a metal which is commonly used in industrials and manufacturing of equipment for most industries round the world. It is cheaper cost compared with the other metals and its durable, hard and easy-to-wear physical properties make it a major choice in the manufacture of equipment parts. The main problem through the uses of mild steel in industry is its resistance against corrosion, especially in acidic solutions. This case led to raise the cost of maintenance of equipment that used mild steel and as a result increased costs for the company. Organic corrosive inhibitors that also act as green chemicals, 4-hydroxybenzylideneaminomethyl-5-ethyl-1,3,4-thiadiazol have been synthesized. This inhibitor is tested as corrosion inhibitor on a mild steel sample MS in 1 M hydrochloric acid solution (HCl using electrochemical measurements test includes PD (Potentiodynamic, EIS (Electrochemical impedance spectroscopy, OCP (Open circuit potential and EFM (electrochemical frequency modulation. The obtained results indicate that 4-hydroxybenzylideneaminomethyl-5-ethyl-1,3,4-thiadiazol acts as a good corrosion inhibitor for mild steel sample in HCl solution with efficiency above 90%. Changes in the impedance parameters postulated adsorption on the mild steel specimens' surfaces of, which it going to the formation of protective coating layer. It also shows that 4-hydroxybenzylideneaminomethyl-5-ethyl-1,3,4-thiadiazol corrosion inhibitors are effective in helping to reduce and slow down the corrosion process that occurs on mild steel surface in hydrochloric acid solution. Increase of corrosion inhibitor concentration provides a protective layer of mild steel. However, this protective layer becomes weak when the temperature of the solution increases. Keywords: Hydroxybenzylideneaminomethy, Potentiodynamic, Electrochemical frequency modulation, Impedance

[Health & safety in a steel plant: technical and managerial action].

Science.gov (United States)

Fusato, M

2012-01-01

The report presents the experience in a steel company to improve the management of issues relating to health and safety of workers. The first part of the work focuses on the description of the interventions made by the company in recent years, which can be divided into technical interventions on production facilities, training and information, organizational activities and specific projects in collaboration with the health service. The second part presents the certification project according to OHSAS 18001, with particular focus on the efforts for a lean management of the documentation required by the management systems and for the automation of internal processes. The last part finally describes in detail the manner in which it was decided to address some issues that significantly affect the factory doctor: the recording and analysis of accidents and medications, management of hazardous substances and personal protective equipment.

Creating a Methodology for Coordinating High-resolution Air Quality Improvement Map and Greenhouse Gas Mitigation Strategies in Pittsburgh City

Science.gov (United States)

Shi, J.; Donahue, N. M.; Klima, K.; Blackhurst, M.

2016-12-01

In order to tradeoff global impacts of greenhouse gases with highly local impacts of conventional air pollution, researchers require a method to compare global and regional impacts. Unfortunately, we are not aware of a method that allows these to be compared, "apples-to-apples". In this research we propose a three-step model to compare possible city-wide actions to reduce greenhouse gases and conventional air pollutants. We focus on Pittsburgh, PA, a city with consistently poor air quality that is interested in reducing both greenhouse gases and conventional air pollutants. First, we use the 2013 Pittsburgh Greenhouse Gas Inventory to update the Blackhurst et al. model and conduct a greenhouse gas abatement potentials and implementation costs of proposed greenhouse gas reduction efforts. Second, we use field tests for PM2.5, NOx, SOx, organic carbon (OC) and elemental carbon (EC) data to inform a Land-use Regression Model for local air pollution at a 100m x 100m spatial level, which combined with a social cost of air pollution model (EASIUR) allows us to calculate economic social damages. Third, we combine these two models into a three-dimensional greenhouse gas cost abatement curve to understand the implementation costs and social benefits in terms of air quality improvement and greenhouse gas abatement for each potential intervention. We anticipated such results could provide policy-maker insights in green city development.

Multifunctional Materials and Structures Gordon Research Conference

Science.gov (United States)

2016-03-08

Technology and Design, Singapore) 7:30 pm - 7:35 pm Introduction by Discussion Leader 7:35 pm - 8:10 pm Anna Balazs (University of Pittsburgh, USA...Athanasopoulos, N University of Patras Poster Presenter Registered Balazs, Anna C University of Pittsburgh Speaker Registered Barth, Friedrich G...Ozden O Texas A&M University Attendee Registered Olson , Jeff Lockheed Martin Space Systems Company Poster Presenter Registered Peijs, Ton Queen

2016 Multifunctional Materials and Structures: Science of Autonomic, Adaptive and Self-Sustaining Systems GRC

Science.gov (United States)

2016-02-23

Design, Singapore) 7:30 pm - 7:35 pm Introduction by Discussion Leader 7:35 pm - 8:10 pm Anna Balazs (University of Pittsburgh, USA) "Designing...N University of Patras Poster Presenter Registered Balazs, Anna C University of Pittsburgh Speaker Registered Barth, Friedrich G. University of...Texas A&M University Attendee Registered Olson , Jeff Lockheed Martin Space Systems Company Poster Presenter Registered Peijs, Ton Queen Mary

Microstructural Developments Leading to New Advanced High Strength Sheet Steels: A Historical Assessment of Critical Metallographic Observations

Energy Technology Data Exchange (ETDEWEB)

Matlock, David K [CSM/ASPPRC; Thomas, Larrin S [CSM/ASPPRC; Taylor, Mark D [CSM/ASPPRC; De Moor, Emmanuel [CSM/ASPPRC; Speer, John G [CSM/ASPPRC

2015-08-03

In the past 30+ years significant advancements have been made in the development of higher strength sheet steels with improved combinations of strength and ductility that have enabled important product improvements leading to safer, lighter weight, and more fuel efficient automobiles and in other applications. Properties of the primarily low carbon, low alloy steels are derived through careful control of time-temperature processing histories designed to produce multiphase ferritic based microstructures that include martensite and other constituents including retained austenite. The basis for these developments stems from the early work on dual-phase steels which was the subject of much interest. In response to industry needs, dual-phase steels have evolved as a unique class of advanced high strength sheet steels (AHSS) in which the thermal and mechanical processing histories have been specifically designed to produce constituent combinations for the purpose of simultaneously controlling strength and deformation behavior, i.e. stress-strain curve shapes. Improvements continue as enhanced dual-phase steels have recently been produced with finer microstructures, higher strengths, and better overall formability. Today, dual phase steels are the primary AHSS products used in vehicle manufacture, and several companies have indicated that the steels will remain as important design materials well into the future. In this presentation, fundamental results from the early work on dual-phase steels will be reviewed and assessed in light of recent steel developments. Specific contributions from industry/university cooperative research leading to product improvements will be highlighted. The historical perspective provided in the evolution of dual-phase steels represents a case-study that provides important framework and lessons to be incorporated in next generation AHSS products.

Zinc toxicity among galvanization workers in the iron and steel industry.

Science.gov (United States)

El Safty, Amal; El Mahgoub, Khalid; Helal, Sawsan; Abdel Maksoud, Neveen

2008-10-01

Galvanization is the process of coating steel or cast iron pieces with zinc, allowing complete protection against corrosion. The ultimate goal of this work was to assess the effect of occupational exposure to zinc in the galvanization process on different metals in the human body and to detect the association between zinc exposure and its effect on the respiratory system. This study was conducted in 111 subjects in one of the major companies in the iron and steel industry. There were 61 subjects (workers) who were involved in the galvanization process. Fifty adult men were chosen as a matched reference group from other departments of the company. All workers were interviewed using a special questionnaire on occupational history and chest diseases. Ventilatory functions and chest X rays were assessed in all examined workers. Also, complete blood counts were performed, and serum zinc, iron, copper, calcium, and magnesium levels were tested. This study illustrated the relation between zinc exposure in the galvanization process and high zinc levels among exposed workers, which was associated with a high prevalence rate of metal fume fever (MFF) and low blood copper and calcium levels. There was no statistically significant difference between the exposed and control groups with regards to the magnesium level. No long-term effect of metals exposure was detected on ventilatory functions or chest X rays among the exposed workers.

75 FR 47780 - Stainless Steel Sheet and Strip in Coils From Mexico; Preliminary Results of Antidumping Duty...

Science.gov (United States)

2010-08-09

... prices to unaffiliated customers. Mexinox S.A. reported home market sales in Mexican pesos, but noted... Company. Certain electrical resistance alloy steel is also excluded from the scope of the order. This... and U.S. markets. For a limited number of sales in both the home market and the United States, Mexinox...

Creep properties and microstructure of the new wrought austenitic steel

Energy Technology Data Exchange (ETDEWEB)

Vlasak, T.; Hakl, J.; Novak, P. [SVUM a.s., Prague (Czech Republic); Vyrostkova, A. [Slovak Academy of Sciences, Kosice (Slovakia). Inst. of Materials Research

2010-07-01

The contribution is oriented on the new wrought austenitic steel BGA4 (Cr23Ni15Mn6Cu3W1.5NbVMo) developed by the British Corus Company. Our main aim is to present creep properties studied in SVUM a.s. Prague during COST 536 programme. The dependencies of the creep strength, strength for specific creep strain and minimum creep strain rate were evaluated on the basis of long term creep tests carried out at temperature interval (625; 725) C. Important part of a paper is metallographic analysis. (orig.)

Exposure to occupational air pollution and cardiac function in workers of the Esfahan Steel Industry, Iran.

Science.gov (United States)

Golshahi, Jafar; Sadeghi, Masoumeh; Saqira, Mohammad; Zavar, Reihaneh; Sadeghifar, Mostafa; Roohafza, Hamidreza

2016-06-01

Air pollution is recognized as an important risk factor for cardiovascular disease. We investigated association of exposure to occupational air pollution and cardiac function in the workers of the steel industry. Fifty male workers of the agglomeration and coke-making parts of the Esfahan Steel Company were randomly selected (n = 50). Workers in the administrative parts were studied as controls (n = 50). Those with known history of hypertension, dyslipidemia, or diabetes, and active smokers were not included. Data of age, body mass index, employment duration, blood pressure, fasting blood sugar, and lipid profile were gathered. Echocardiography was performed to evaluate cardiac function. Left ventricular ejection fraction was lower in workers of the agglomeration/coke-making parts than in controls (mean difference = 5 to 5.5 %, P steel industry is associated with left heart systolic dysfunction. Possible right heart insults due to air pollution exposure warrant further investigations.

Microstructure and mechanical properties in the weld heat affected zone of 9Cr-2W-VTa reduced activation ferritic/martensitic steel for fusion

Energy Technology Data Exchange (ETDEWEB)

Moon, Joonoh; Lee, Changhoon; Lee, Taeho; Jang, Minho; Park, Mingu [Korea Institute of Materials Science, Changwon (Korea, Republic of); Kim, Hyoung Chan [National Fusion Research Institute, Daejeon (Korea, Republic of)

2014-05-15

Reduced activation ferritic/martensitic (RAFM) steel demonstrated excellent resistance to the neutron irradiation and mechanical properties. The investigation of weldability in company with the development of RAFM steel is essential for construction of the fusion reactor. Generally, the superior mechanical properties of the RAFM steel can be upset during welding process due to microstructural change by rapid heating and cooling in the weld heat affected zone (HAZ). The phase transformation and mechanical properties in the weld HAZ of RAFM steel were investigated. The base steel consisted of tempered martensite and two carbides. During rapid welding thermal cycle, the microstructure of the base steel was transformed into martensite and δ-ferrite. In addition, the volume fraction of δ-ferrite and grain size increased with increase in the peak temperature and heat input. The strength of the HAZs was higher than that of the base steel due to the formation of martensite, whereas the impact properties of the HAZs deteriorated as compared with the base steel due to the formation of δ-ferrite. The PWHT improved the impact properties of the HAZs, resulting from the formation of tempered martensite.

Equity in Microscale Urban Design and Walkability: A Photographic Survey of Six Pittsburgh Streetscapes

Directory of Open Access Journals (Sweden)

Bradley Bereitschaft

2017-07-01

Full Text Available This paper explores inequity in neighborhood walkability at the micro-scale level by qualitatively examining six streetscapes in Pittsburgh, Pennsylvania. A photographic survey is used to highlight differences in the quality and design of the built environment among pairs of streetscapes with high or low social vulnerability but approximately equal quantitative Walk Scores®. The survey revealed discernable differences in the quality and maintenance of the built environment among those in more and less disadvantaged neighborhoods. This was true of several characteristics expected to affect walkability, including enclosure, transparency, complexity, and tidiness. Streetscapes in neighborhoods with high social vulnerability exhibited less contiguous street walls, fewer windows and less transparent storefronts, less well maintained infrastructure, fewer street cafés, and overall less complexity than those in neighborhoods with low social vulnerability. Implications for planning and policy are discussed.

Recent Trends of Coated Sheet Steels for Automotive use

International Nuclear Information System (INIS)

Moon, Manbeen

2012-01-01

Recent issues in the automotive industries are, improvement of fuel efficiency according to the worldwide CO 2 regulation, passenger safety through enhanced crash worthiness, superior design and cost reduction due to price fluctuation of raw material. To meet these demands, steelmaking companies are developing advanced high strength steel and new process technologies such as hydroforming, TWB(Tailor Welded Blank), hot stamping and so on. In addition, eco-friendly and high corrosion resistant coating technologies are getting more attention to comply with the environmental regulations. In this paper, reviews and prospects of recent coating technologies for automotive use are presented

1996 environmental monitoring report for the Bettis Atomic Power Laboratory, Pittsburgh Site

International Nuclear Information System (INIS)

1996-01-01

The 1996 results for the Bettis-Pittsburgh radiological and non-radiological environmental monitoring programs are presented. The primary mission of the Bettis Laboratory has been directed toward the design, development, testing, and operation of nuclear reactor propulsion plants for naval surface and submarine vessels. The results obtained from the monitoring programs demonstrate that the existing procedures ensured that releases to the environment during 1996 were in accordance with applicable federal, state, county, and local regulations. Evaluation of the environmental data indicated that the current operations at the Site continue to have no adverse effect on the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrated that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency, the Nuclear Regulatory Commission and the US Department of Energy. A risk assessment of potentially exposed populations to chemical residues in the environment at the Site demonstrated that these residues do not pose any significant health risk

1996 environmental monitoring report for the Bettis Atomic Power Laboratory, Pittsburgh Site

Energy Technology Data Exchange (ETDEWEB)

NONE

1996-12-31

The 1996 results for the Bettis-Pittsburgh radiological and non-radiological environmental monitoring programs are presented. The primary mission of the Bettis Laboratory has been directed toward the design, development, testing, and operation of nuclear reactor propulsion plants for naval surface and submarine vessels. The results obtained from the monitoring programs demonstrate that the existing procedures ensured that releases to the environment during 1996 were in accordance with applicable federal, state, county, and local regulations. Evaluation of the environmental data indicated that the current operations at the Site continue to have no adverse effect on the quality of the environment. A conservative assessment of radiation exposure to the general public as a result of Site operations demonstrated that the dose received by any member of the public was well below the most restrictive dose limits established by the Environmental Protection Agency, the Nuclear Regulatory Commission and the US Department of Energy. A risk assessment of potentially exposed populations to chemical residues in the environment at the Site demonstrated that these residues do not pose any significant health risk.

75 FR 42432 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-07-21

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... abandonment of facilities by Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas... resources, fisheries, and wetlands; Cultural resources; Vegetation and wildlife; Endangered and threatened...

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

Energy Technology Data Exchange (ETDEWEB)

Choi, So Young; Kim, Jong Do [Korea Maritime and Ocean University, Busan (Korea, Republic of); Kim, Jong Su [Korea Institute of Machinery and Materials, Daejeon (Korea, Republic of)

2015-01-15

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained.

The Study on Weldability of Boron Steel and Hot-Stamped Steel by Using Laser Heat Source (Ⅲ) - Comparison on Laser Weldability of Boron Steel and Hot -Stamped Steel-

International Nuclear Information System (INIS)

Choi, So Young; Kim, Jong Do; Kim, Jong Su

2015-01-01

This study was conducted to compare the laser weldability of boron steel and hot-stamped steel. In general, boron steel is used in the hot-stamping process. Hot-stamping is a method for simultaneously forming and cooling boron steel in a press die after heating it to the austenitizing temperature. Hot-stamped steel has a strength of 1500 MPa or more. Thus, in this study, the laser weldability of boron steel and that of hot-stamped steel were investigated and compared. A continuous wave disk laser was used to produce butt and lap joints. In the butt welding, the critical cooling speed at which full penetration was obtained in the hot-stamped steel was lower than that of boron steel. In the lap welding, the joint widths were similar regardless of the welding speed when full penetration was obtained

Structural steels for fixed offshore platforms: technical challenges at the Brazilian national supply chain; Acos estruturais para plataformas fixas offshore: desafios tecnicos junto a cadeia de suprimentos nacional brasileira

Energy Technology Data Exchange (ETDEWEB)

Castro, Fabio Modesti Orsini de [Promon Engenharia Ltda., Rio de Janeiro, RJ (Brazil)

2012-07-01

This paper presents the main technical requirements for structural steel applied to the construction of bottom fixed offshore platforms, based on the most widely adopted and recognized actual standards. The mechanical properties and lab tests necessary to fulfill the Risk Management and E and P companies requirements are presented aiming to build the theoretical bases necessary for the engineering design of projects of this kind. The main types of steel available in the national market are presented at the end, giving an overall look at the Brazilian steel supply chain. (author)

75 FR 13524 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

Science.gov (United States)

2010-03-22

... Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental... notice that on March 5, 2010, Northern Natural Gas Company (Northern Natural), 1111 South 103rd Street, Omaha, Nebraska 68124- 1000, filed on behalf of itself and other owners, Southern Natural Gas Company...

Connections: Superplasticity, Damascus Steels, Laminated Steels, and Carbon Dating

Science.gov (United States)

Wadsworth, Jeffrey

2016-12-01

In this paper, a description is given of the connections that evolved from the initial development of a family of superplastic plain carbon steels that came to be known as Ultra-High Carbon Steels (UHCS). It was observed that their very high carbon contents were similar, if not identical, to those of Damascus steels. There followed a series of attempts to rediscover how the famous patterns found on Damascus steels blades were formed. At the same time, in order to improve the toughness at room temperature of the newly-developed UHCS, laminated composites were made of alternating layers of UHCS and mild steel (and subsequently other steels and other metals). This led to a study of ancient laminated composites, the motives for their manufacture, and the plausibility of some of the claims relating to the number of layers in the final blades. One apparently ancient laminated composite, recovered in 1837 from the great pyramid of Giza which was constructed in about 2750 B.C., stimulated a carbon dating study of ancient steels. The modern interest in "Bladesmithing" has connections back to many of these ancient weapons.

Effect of brief sleep hygiene education for workers of an information technology company.

Science.gov (United States)

Kakinuma, Mitsuru; Takahashi, Masaya; Kato, Noritada; Aratake, Yutaka; Watanabe, Mayumi; Ishikawa, Yumi; Kojima, Reiko; Shibaoka, Michi; Tanaka, Katsutoshi

2010-01-01

To investigate the effects of sleep hygiene education for workers of an information technology (IT) company, we conducted a controlled clinical trial providing 581 workers one-hour sleep hygiene education. The contents of the sleep hygiene education program were a review of sleep habits, provide sleep hygiene education, and the establishment of sleep habit goals. A self-report questionnaire was used to measure outcomes including the Pittsburgh Sleep Quality Index (PSQI), Karolinska Sleepiness Scale (KSS), Checklist Individual Strength (CIS), Center for Epidemiologic Studies for Depression (CES-D), and mean sleep duration on weekdays before and 4 wk after the intervention. A total of 391 participants were included in the analysis, with 214 participants in the sleep hygiene education group and 177 in the waiting list group. KSS score at 2 P.M. decreased by 0.42 points in the sleep hygiene education group, but increased by 0.08 points in the waiting list group, showing a significant effect size of 0.50 (95%CI, -0.97 to -0.04, peducation may improve afternoon sleepiness at work, but not sleep at night for IT workers.

SAFER - Company Snapshot - SAFER - Company Snapshot

Data.gov (United States)

Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

Coopetition in the steel industry − analysis of coopetition relations in the value net

Directory of Open Access Journals (Sweden)

W. Sroka

2013-01-01

Full Text Available The paper presents some of the problems relating to the coopetition relations in the steel industry. Coopetition is one of the key issues relating to the inter-organizational cooperation in recent years. On one hand, companies are working together and sharing the effects of uncertainty arising from the environment, and on the other hand they compete with each other in other areas, remaining competitors. In other words, they must reconcile each aspect of competition and cooperation, which is particularly important in case of cooperation involving more than two partners. Coopetition is a relatively new phenomenon, however it is growing very rapidly, and companies which are able to utilize this concept effectively can gain a coopetitive advantage over their competitors.

Evaluation of examination techniques for ferritic stainless steel feedwater heater tubing

International Nuclear Information System (INIS)

Nugent, M.J.; Catapano, M.C.

1995-01-01

Ferritic stainless steel has been finding increased application in utility plant feedwater heaters due to good strength and corrosion resistance and absence of potential copper contamination of feedwater system. Ferritic stainless steel is highly magnetic and is generally not inspectable using conventional eddy current testing techniques. A variety of techniques have been developed for inspection of this tubing material used in typical heat exchanger applications. Through a project funded by the Empire State Electric Energy Research Corporation (ESEERCO), the evaluation of data generated by four present state of the art NDE testing techniques were evaluated on a controlled mock-up of the heater tubing with service related defects. The primary objective was to determine the strengths and limitations of each method. The testing of two in service feedwater heaters at the Consolidated Edison Company of New York, Inc. (Con Edison's) Arthur Kill Generating Station also allowed further evaluations based on actual field conditions

[Factors influencing electrocardiogram results in workers exposed to noise in steel-making and steel-rolling workshops of an iron and steel plant].

Science.gov (United States)

Li, Y H; Yu, S F; Gu, G Z; Chen, G S; Zhou, W H; Wu, H; Jiao, J

2016-02-20

To investigate the factors influencing the electrocardiogram results in the workers exposed to noise in steel-making and steel rolling workshops of an iron and steel plant. From September to December, 2013, cluster sampling was used to select 3 150 workers exposed to noise in the steel-making and steel-rolling workshops of an iron and steel plant, and a questionnaire survey and physical examinations were performed. The number of valid workers was 2 915, consisting of 1 606 workers in the steel-rolling workshop and 1 309 in the steel-making workshop. The electrocardiogram results of the workers in steel-making and steel-rolling workshops were analyzed. The overall abnormal rate of electrocardiogram was 26.35%, and the workers in the steel-making workshop had a significantly higher abnormal rate of electrocardiogram than those in the steel-rolling workshop(32.24% vs 21.54%, Pelectrocardiogram than female workers(27.59% vs 18.61%, Pelectrocardiogram than those who did not drink(28.17% vs 23.75%, Pelectrocardiogram than those who were not exposed to high temperature(29.43% vs 20.14%, Pelectrocardiogram in the workers with cumulative noise exposure levels of electrocardiogram results. High cumulative noise exposure, alcohol consumption, and high temperature may affect the abnormal rate of electrocardiogram in the workers exposed to noise in steel-making and steel-rolling workshops.

Compactibility of atomized high-speed steel and steel 3 powders

International Nuclear Information System (INIS)

Kulak, L.D.; Gavrilenko, A.P.; Pikozh, A.P.; Kuz'menko, N.N.

1985-01-01

Spherical powders and powders of lammellar-scaly shape of high-speed R6M5K5 steel and steel 3 produced by the method of centrifugal atomization of a rotating billet under conditions of cold pressing in steel moulds are studied for thier compactability. Compacting pressure dependnences are establsihed for density of cold-pressed compacts of spherical and scaly powders. The powders of lammellar-scaly shape both of high-speed steel and steel 3 are found to possess better compactibility within a wide range of pressures as compared to powders of spherical shape. Compacts of the lammellar-scaly powders possess also higher mechanical strength

Bond characteristics of steel fiber and deformed reinforcing steel bar embedded in steel fiber reinforced self-compacting concrete (SFRSCC)

Science.gov (United States)

Aslani, Farhad; Nejadi, Shami

2012-09-01

Steel fiber reinforced self-compacting concrete (SFRSCC) is a relatively new composite material which congregates the benefits of the self-compacting concrete (SCC) technology with the profits derived from the fiber addition to a brittle cementitious matrix. Steel fibers improve many of the properties of SCC elements including tensile strength, ductility, toughness, energy absorption capacity, fracture toughness and cracking. Although the available research regarding the influence of steel fibers on the properties of SFRSCC is limited, this paper investigates the bond characteristics between steel fiber and SCC firstly. Based on the available experimental results, the current analytical steel fiber pullout model (Dubey 1999) is modified by considering the different SCC properties and different fiber types (smooth, hooked) and inclination. In order to take into account the effect of fiber inclination in the pullout model, apparent shear strengths ( τ ( app)) and slip coefficient ( β) are incorporated to express the variation of pullout peak load and the augmentation of peak slip as the inclined angle increases. These variables are expressed as functions of the inclined angle ( ϕ). Furthurmore, steel-concrete composite floors, reinforced concrete floors supported by columns or walls and floors on an elastic foundations belong to the category of structural elements in which the conventional steel reinforcement can be partially replaced by the use of steel fibers. When discussing deformation capacity of structural elements or civil engineering structures manufactured using SFRSCC, one must be able to describe thoroughly both the behavior of the concrete matrix reinforced with steel fibers and the interaction between this composite matrix and discrete steel reinforcement of the conventional type. However, even though the knowledge on bond behavior is essential for evaluating the overall behavior of structural components containing reinforcement and steel fibers

Corrosion resistant steel

International Nuclear Information System (INIS)

Zubchenko, A.S.; Borisov, V.P.; Latyshev, V.B.

1980-01-01

Corrosion resistant steel for production of sheets and tubes containing C, Mn, Cr, Si, Fe is suggested. It is alloyed with vanadium and cerium for improving tensile properties and ductility. The steel can be melted by a conventional method in electric-arc or induction furnaces. The mentioned steel is intended to be used as a substitute for nickel-bearing austenitic steels

Scott Brothers Windows and Doors Information Sheet

Science.gov (United States)

Scott Brothers Windows and Doors (the Company) is located in Bridgeville, Pennsylvania. The settlement involves renovation activities conducted at property constructed prior to 1978, located in Pittsburgh, Pennsylvania.

Thermoplastic liners for carbon steel pipelines

Energy Technology Data Exchange (ETDEWEB)

Mehdi, Mauyed S.; AlDossary, Abdullah K. [Saudi Aramco, Dhahran (Saudi Arabia)

2009-12-19

Materials selection for pipe and fittings used to convey corrosive fluids has often been a challenge. Traditionally, exotic Corrosion Resistant Alloys (CRA) have been used in corrosive environments despite their high cost. Plastic lined carbon steel piping offers a cost effective alternative to the use of CRAs by eliminating corrosion, significantly reducing the use of toxic chemicals and the heavy metal usually present in CRAs. Thermoplastic Liners offer the combination of corrosion resistance and mechanical strength, which are unachievable with singular materials. Under pressure conditions, the liner is fully supported by the metalwork, while under vacuum conditions, the liner must be thick enough along with venting system to withstand the collapsing forces created by the negative pressure. Plastic liners have been used successfully to line and protect metallic pipelines for many years and have become an indispensable requirement of the oil and gas industry particularly with water injection and hydrocarbon services. In the case of internally corroded pipes, the use of thermoplastic liners for rehabilitation is an option to extend the lifetime of companies' assets, reduce maintenance cost and increase intervals between T and Is. For new construction, plastic liners in carbon steel pipes can compete technically and economically with pipelines of CRA materials and other corrosion inhibition systems. This paper describes various design features, installations of thermoplastic liners in comparison to other corrosion inhibition methods. (author)

The steel scrap age.

Science.gov (United States)

Pauliuk, Stefan; Milford, Rachel L; Müller, Daniel B; Allwood, Julian M

2013-04-02

Steel production accounts for 25% of industrial carbon emissions. Long-term forecasts of steel demand and scrap supply are needed to develop strategies for how the steel industry could respond to industrialization and urbanization in the developing world while simultaneously reducing its environmental impact, and in particular, its carbon footprint. We developed a dynamic stock model to estimate future final demand for steel and the available scrap for 10 world regions. Based on evidence from developed countries, we assumed that per capita in-use stocks will saturate eventually. We determined the response of the entire steel cycle to stock saturation, in particular the future split between primary and secondary steel production. During the 21st century, steel demand may peak in the developed world, China, the Middle East, Latin America, and India. As China completes its industrialization, global primary steel production may peak between 2020 and 2030 and decline thereafter. We developed a capacity model to show how extensive trade of finished steel could prolong the lifetime of the Chinese steelmaking assets. Secondary steel production will more than double by 2050, and it may surpass primary production between 2050 and 2060: the late 21st century can become the steel scrap age.

Preparation and characterization of 304 stainless steel/Q235 carbon steel composite material

Directory of Open Access Journals (Sweden)

Wenning Shen

Full Text Available The composite material of 304 stainless steel reinforced Q235 carbon steel has been prepared by modified hot-rolling process. The resulted material was characterized by scanning electron microscope, three-electrode method, fault current impact method, electrochemical potentiodynamic polarization curve measurement and electrochemical impedance spectroscopy. The results showed that metallurgical bond between the stainless steel layer and carbon steel substrate has been formed. The composite material exhibited good electrical conductivity and thermal stability. The average grounding resistance of the composite material was about 13/20 of dip galvanized steel. There has no surface crack and bubbling formed after fault current impact. The composite material led to a significant decrease in the corrosion current density in soil solution, compared with that of hot dip galvanized steel and bare carbon steel. On the basis polarization curve and EIS analyses, it can be concluded that the composite material showed improved anti-corrosion property than hot-dip galvanized steel. Keywords: Stainless steel, Carbon steel, Anti-corrosion, Conductivity, Electrochemical, EIS

Decontamination of stainless steel canisters that contain high-level waste

International Nuclear Information System (INIS)

Bray, L.A.

1987-01-01

At the West Valley Nuclear Services Company (WVNSC) in West Valley, New York, high-level radioactive waste (HLW) will be vitrified into a borosilicate glass form and poured into large, stainless steel canisters. During the filling process, volatile fission products, principally 137 Cs, condense on the exterior of the canisters. The smearable contamination that remains on the canisters after they are filled and partially cooled must be removed from the canisters' exterior surfaces prior to their storage and ultimate shipment to a US Department of Energy (DOE) repository for disposal. A simple and effective method was developed for decontamination of HLW canisters. This method of chemical decontamination is applicable to a wide variety of contaminated equipment found in the nuclear industry. The process employs a reduction-oxidation system [Ce(III)/Ce(IV)] in nitric acid solution to chemically mill the surface of stainless steel, similar to the electropolishing process, but without the need for an applied electrical current. Contaminated canisters are simply immersed in the solution at controlled temperature and Ce(IV) concentration levels

IMPLEMENTATION OF QUALITATIVE RULES IN COMPANY`S INFORMATION MANAGEMENT

Directory of Open Access Journals (Sweden)

Anna WOLNOWSKA

2012-07-01

Full Text Available In the article there were presented chosen issues of quality management. Important role of information and work processes in companies were emphasized . Based on eight rules of quality management, TQM standards and ideas of discipline pioneers like Deming, Juran, Crosby and Shewart, author has constructed way of using chosen rules and assumptions to company`s information circulation. Analogy, suggested by author, has not only emphasized importance of information as a company`s resource, but also has pointed to possibility of improving ways of managing this information.

Plasma nitriding of steels

CERN Document Server

Aghajani, Hossein

2017-01-01

This book focuses on the effect of plasma nitriding on the properties of steels. Parameters of different grades of steels are considered, such as structural and constructional steels, stainless steels and tools steels. The reader will find within the text an introduction to nitriding treatment, the basis of plasma and its roll in nitriding. The authors also address the advantages and disadvantages of plasma nitriding in comparison with other nitriding methods. .

EMPLOYEE PERCEPTIONS OF OCCUPATIONAL HEALTH AND SAFETY STANDARDS IN THE STEEL INDUSTRY

Directory of Open Access Journals (Sweden)

J. Mojapelo

2016-07-01

Full Text Available The inability to follow occupational health and safety standards typically resultsin accidents that place severe financial burdens on both employees as well asorganisations. The aim of this studyis to explore the perceptionsof employees inthe steel industry towards occupational health and safety standards in the steelindustry in South Africa. A survey was conducted in which a structuredquestionnaire was distributed to a purposive sample of 165 employees employedby a largesteel processing company in Gauteng Province. The collected data wereanalysed using SPSS (Version 22.0. A combination of descriptive statistics andanalysis of mean scores was applied to meet the aim of the study. The resultsreveal that employees in the steel industry perceived that occupational health andsafety standards were satisfactory in all seven occupational health and safetydimensions considered in this study. These are (1 information and training, (2health and safety awareness, (3 employee behaviour (4 role of the supervisor, (5health and safety reporting mechanisms, (6 workplace inspection, and (7workplace environment. Among these dimensions, safety awareness emerged asthe most important dimension to employees. The results may be utilised bymanagers in the steel industry to identify and direct their attention to the keyoccupational health and safety factors in their different contexts.

76 FR 13234 - Investigations Regarding Certifications of Eligibility To Apply for Worker Adjustment Assistance...

Science.gov (United States)

2011-03-10

... Plastics Richmond, KY 02/14/11 02/11/11. (Company). 75260 Pittsburgh Corning Port Allegany, PA..... 02/14.../One- Stop). 75287 Anchorage Daily News (State/ Anchorage, AK......... 02/15/11 02/14/11. One-Stop...). 75300 Key Plastics, LLC (Company) Hartford City, IN..... 02/15/11 02/14/11. 75301 Springs Global US, Inc...

Steel

International Nuclear Information System (INIS)

Zorev, N.N.; Astafiev, A.A.; Loboda, A.S.; Savukov, V.P.; Runov, A.E.; Belov, V.A.; Sobolev, J.V.; Sobolev, V.V.; Pavlov, N.M.; Paton, B.E.

1977-01-01

Steels also containing Al, N and arsenic, are suitable for the construction of large components for high-power nuclear reactors due to their good mechanical properties such as good through-hardening, sufficiently low brittleness conversion temperature and slight displacement of the latter with neutron irradiation. Defined steels and their properties are described. (IHOE) [de

Study on energy saving and the CO{sub 2} reduction plan of Korean iron and steel industry

Energy Technology Data Exchange (ETDEWEB)

Kim, J.W.; Kim, J.I.; Kim, S.R. [Korea Energy Economics Institute, Euiwang (Korea, Republic of)

1997-08-01

An iron and steel company which consumes a lot of energy should continue restructuring with integrated management methods based on a thorough profitability principle together with continuous investment in green technology development, and actively search for advancing plans to upper and lower streams through vigorous foreign investment. The iron and steel industry now must realize that environmental strategy will eventually be converted into the profit of the company eventually, and escape from the reactive attitude of the past on environment. It is urgently required that they possess an aggressive management strategy that could capture the impact of environmental regulation which may be far greater than the Uruguay Round (UR) of the past as the opportunistic factor that would rather increase the power of the company. Now enterprises need a change of attitude that handles the capital invested in environment as an aggressive strategic element that could guarantee the profit for the future not as mere concept of expenses. As in the case of the 3M company, the concept of `Polluter Pays Principle` should be accepted as the 3P concept of pollution- prevention compensation principle called as the concept of `Pollution Prevention Pays`. That is, expanding the use of clean energy and raising the public image as an environment-friendly enterprise has become an important assignment of an entrepreneur now. First of all, all employees including top management must renew their recognition on environmental management. They should be able to have collective wisdom enough to take advantage of the manpower and resources required for minimizing environmental damages as the investment or opportunistic element that could bring tangible and intangible profits in the future. 33 refs., 2 figs., 11 tabs.

Tool steels

DEFF Research Database (Denmark)

Højerslev, C.

2001-01-01

On designing a tool steel, its composition and heat treatment parameters are chosen to provide a hardened and tempered martensitic matrix in which carbides are evenly distributed. In this condition the matrix has an optimum combination of hardness andtoughness, the primary carbides provide...... resistance against abrasive wear and secondary carbides (if any) increase the resistance against plastic deformation. Tool steels are alloyed with carbide forming elements (Typically: vanadium, tungsten, molybdenumand chromium) furthermore some steel types contains cobalt. Addition of alloying elements...... serves primarily two purpose (i) to improve the hardenabillity and (ii) to provide harder and thermally more stable carbides than cementite. Assuming proper heattreatment, the properties of a tool steel depends on the which alloying elements are added and their respective concentrations....

Substitution of modified 9 Cr-1 Mo steel for austentic stainless steels

International Nuclear Information System (INIS)

Sikka, V.K.

1982-04-01

This report describes the current program to develop a high-strength ferritic-martensitic steel. The alloy is essentially Fe-9% Cr-1% Mo with small additions of V and Nb and is known as modifed 9 Cr-1 Mo steel. Its elevated-temperature properties and design allowable stresses match those of type 304 stainless steel for temperatures up to 600 0 C and exceed those of other ferritic steels by factors of 2 to 3. The improved strength of this alloy permits its use in place of stainless steels for many applications

Weldability of Stainless Steels

International Nuclear Information System (INIS)

Saida, Kazuyoshi

2010-01-01

It gives an outline of metallographic properties of welding zone of stainless steels, generation and mechanisms of welding crack and decreasing of corrosion resistance of welding zone. It consists of seven chapters such as introduction, some kinds of stainless steels and properties, metallographic properties of welding zone, weld crack, toughness of welding zone, corrosion resistance and summary. The solidification modes of stainless steels, each solidification mode on the cross section of Fe-Cr-Ni alloy phase diagram, each solidification mode of weld stainless steels metal by electron beam welding, segregation state of alloy elements at each solidification mode, Schaeffler diagram, Delong diagram, effects of (P + S) mass content in % and Cr/Ni equivalent on solidification cracking of weld stainless steels metal, solidification crack susceptibility of weld high purity stainless steels metal, effects of trace impurity elements on solidification crack susceptibility of weld high purity stainless steels metal, ductile fracture susceptibility of weld austenitic stainless steels metal, effects of H2 and ferrite content on generation of crack of weld 25Cr-5N duplex stainless steels, effects of O and N content on toughness of weld SUS 447J1 metals, effect of ferrite content on aging toughness of weld austenitic stainless steel metal, corrosion morphology of welding zone of stainless steels, generation mechanism of knife line attack phenomenon, and corrosion potential of some kinds of metals in seawater at room temperature are illustrated. (S.Y.)

Geostatistical modeling of the gas emission zone and its in-place gas content for Pittsburgh-seam mines using sequential Gaussian simulation

Science.gov (United States)

Karacan, C.O.; Olea, R.A.; Goodman, G.

2012-01-01

Determination of the size of the gas emission zone, the locations of gas sources within, and especially the amount of gas retained in those zones is one of the most important steps for designing a successful methane control strategy and an efficient ventilation system in longwall coal mining. The formation of the gas emission zone and the potential amount of gas-in-place (GIP) that might be available for migration into a mine are factors of local geology and rock properties that usually show spatial variability in continuity and may also show geometric anisotropy. Geostatistical methods are used here for modeling and prediction of gas amounts and for assessing their associated uncertainty in gas emission zones of longwall mines for methane control.This study used core data obtained from 276 vertical exploration boreholes drilled from the surface to the bottom of the Pittsburgh coal seam in a mining district in the Northern Appalachian basin. After identifying important coal and non-coal layers for the gas emission zone, univariate statistical and semivariogram analyses were conducted for data from different formations to define the distribution and continuity of various attributes. Sequential simulations performed stochastic assessment of these attributes, such as gas content, strata thickness, and strata displacement. These analyses were followed by calculations of gas-in-place and their uncertainties in the Pittsburgh seam caved zone and fractured zone of longwall mines in this mining district. Grid blanking was used to isolate the volume over the actual panels from the entire modeled district and to calculate gas amounts that were directly related to the emissions in longwall mines.Results indicated that gas-in-place in the Pittsburgh seam, in the caved zone and in the fractured zone, as well as displacements in major rock units, showed spatial correlations that could be modeled and estimated using geostatistical methods. This study showed that GIP volumes may

Product consistency testing of three reference glasses in stainless steel and perfluoroalkoxy resin vessels

International Nuclear Information System (INIS)

Olson, K.M.; Smith, G.L.; Marschman, S.C.

1995-03-01

Because of their chemical durability, silicate glasses have been proposed and researched since the mid-1950s as a medium for incorporating high-level radioactive waste (HLW) generated from processing of nuclear materials. A number of different waste forms were evaluated and ranked in the early 1980s; durability (leach resistance) was the highest weighted factor. Borosilicate glass was rated the best waste form available for incorporation of HLW. Four different types of vessels and three different glasses were used to study the possible effect of vessel composition on durability test results from the Production Consistency Test (PCT). The vessels were 45-m 304 stainless steel vessels, 150-m 304 L stainless steel vessels, and 60-m perfluoroalkoxy (PFA) fluoropolymer resin vessels. The three glasses were the Environmental Assessment glass manufactured by Corning Incorporated and supplied by Westinghouse Savannah River company, and West Valley Nuclear Services reference glasses 5 and 6, manufactured and supplied by Catholic University of America. Within experimental error, no differences were found in durability test results using the 3 different glasses in the 304L stainless steel or PFA fluoropolymer resin vessels over the seven-day test period

Preparation and characterization of 304 stainless steel/Q235 carbon steel composite material

Science.gov (United States)

Shen, Wenning; Feng, Lajun; Feng, Hui; Cao, Ying; Liu, Lei; Cao, Mo; Ge, Yanfeng

The composite material of 304 stainless steel reinforced Q235 carbon steel has been prepared by modified hot-rolling process. The resulted material was characterized by scanning electron microscope, three-electrode method, fault current impact method, electrochemical potentiodynamic polarization curve measurement and electrochemical impedance spectroscopy. The results showed that metallurgical bond between the stainless steel layer and carbon steel substrate has been formed. The composite material exhibited good electrical conductivity and thermal stability. The average grounding resistance of the composite material was about 13/20 of dip galvanized steel. There has no surface crack and bubbling formed after fault current impact. The composite material led to a significant decrease in the corrosion current density in soil solution, compared with that of hot dip galvanized steel and bare carbon steel. On the basis polarization curve and EIS analyses, it can be concluded that the composite material showed improved anti-corrosion property than hot-dip galvanized steel.

A Study on the Sustainable Performance of the Steel Industry in Korea Based on SBM-DEA

Directory of Open Access Journals (Sweden)

Yongrok Choi

2018-01-01

Full Text Available Since South Korea has implemented its emissions trading scheme (ETS in 2015, several studies have explored the sustainable performance of ETS in terms of production efficiency. However, few studies focused on Korean company-level data in their model. Thus, this study focuses on data from firms in the steel industry, which is a representative greenhouse gas emitter. Based on the slack-based measure (SBM approach, we find the following implications: First, this paper evaluates both environment energy efficiency (EEE and traditional energy efficiency and discovers that the efficiency value, in general, is overestimated, when greenhouse gas emissions are ignored. EEE still shows a decreasing efficiency value over time, implying that strong regulation is needed to increase efficiency. Second, this paper provides the return to scale status of decision-making units in the steel industry, through decomposing EEE. Results show that many steel firms are in the state of increasing returns to scale, so they can enhance their efficiency by increasing their scale. Finally, this paper provides benchmark information with which an inefficient firm can enhance its performance.

Compresibility and sinterability of HCx PM steel diluted with stainless steels

Directory of Open Access Journals (Sweden)

Elena Gordo

2003-12-01

Full Text Available HCx powder metallurgy steel contains in its composition high contents of Cr and C, and significant quantities of alloy elements typical of tool steels (Mo, V, W, to provide the corrosion resistance of stainless steel with wear resistance of tool steels. HCx appears to be a suitable material for applications in aggressive environments, as valve seat inserts in automotive engines. However, this steel presents a low compressibility leading to high production costs. In this work, some results carried out to improve the compressibility of HCx are presented. The way to attempt this improvement is the dilution of base material with two stainless steels, the ferritic 430LHC and the austenitic 316L. The powder mixes prepared were uniaxially pressed to study the compressibility. The sinterability was study by determining of density, hardness, transverse rupture strength (TRS and microstructural evolution after vacuum sintering at different temperatures. As a result, better compressibility is observed in the mixes although not all of them present the properties required.

Ergonomics Intervention in Unit Blast Furnace of a Typical Steel Company

Directory of Open Access Journals (Sweden)

Majid Mo'tamed-Zadeh

2013-10-01

Full Text Available Objective: Musculoskeletal disorders are a major part of occupational diseases in working environments. Prevention of the occurrence of these problems requires the use of ergonomic assessment techniques and intervention to improve working conditions. The purpose of this study was to investigate the prevalence of musculoskeletal disorders in workers in the blast furnace unit and the intervention to reduce the prevalence of these disorders. Materials & Methods: This study conducted on 24 people working in the furnace unit. Medical records of furnace workers were reviewed and Nordic Musculoskeletal Questionnaires (NMQ was completed. Drilling operation and oxygenation task were assessed by using Rapid Entire Body Assessment (REBA and workers were given the necessary training. Work stations of oxygenation for 24 workers were redesign and Drilling operation was mechanized. And employed workers with musculoskeletal disorders were changed. REBA and NMQ were used to reassess the intervention effects. Results: According to medical records and results of NMQ about 37.5 percent of workers had musculoskeletal disorders. REBA final score was 11 and 10 for the drilling and oxygenation tasks respectively. After redesigning the workstation, REBA final score was 5 for the oxygenation task and the drilling operation removed by mechanized. With the amendment procedures of musculoskeletal disorders was reduced 17.5 percent. Conclusion: According to REBA Score, the risk of musculoskeletal disorders was reduced by implementing amendments to the furnace unit and prevalence of musculoskeletal disorders also significantly reduced. Keyword: Ergonomic, MSDs, REBA, NMQ, Steel

Boron Steel: An Alternative for Costlier Nickel and Molybdenum Alloyed Steel for Transmission Gears

Directory of Open Access Journals (Sweden)

A. Verma

2010-06-01

Full Text Available Case Carburized (CC low carbon steels containing Ni, Cr and Mo alloying elements are widely used for transmission gears in automobile, as it possesses desired mechanical properties. In order to cut cost and save scarce materials like Ni and Mo for strategic applications, steel alloyed with Boron has been developed, which gives properties comparable to Ni-Cr-Mo alloyed steel. In the process of steel development, care was taken to ensure precipitation of boron which results in precipitation hardening. The characterization of the developed boron steel had exhibited properties comparable to Ni-Cr-Mo alloyed steel and superior to conventional boron steel.

Resource based view of the firm: measures of reputation among health service-sector businesses.

Science.gov (United States)

Smith, Alan D

2008-01-01

Application of the strategic leverage of Resource Based View of the Firm (RBV) directly advocates that a company's competitive advantage is derived from its ability to assemble and exploit an appropriate combination of resources (both tangible and intangible assets). The three companies that were selected were Pittsburgh-based companies that were within relatively easy access, representing healthcare service-related industries, and can be reviewed for the principles of the RBV. The particular firms represented a variety of establishments and included Baptist Homes (a long-term care facility), University of Pittsburgh Medical Center (UPMC)(a provider of hospital and other health services), and GlaxoSmithKline, Consumer Healthcare, North America (GSK-CHNA)(a global provider of healthcare products and services). Through the case studies, it was found that not all intangible assets are strategic, and by extension, not all measures of reputation are strategic either. For an intangible asset to be considered strategic, in this case reputation, it must be valuable, rare, imperfectly imitable, and non-substitutable.

Interaction model of steel ladle of continuous caster in steel works

Directory of Open Access Journals (Sweden)

Huang Bang Fu

2016-01-01

Full Text Available For further research on the precondition and interoperability model of interaction ladles among continuous caster, this article takes steel ladle of Y steel works as the object of research. On the basis of turnover number calculation model of single cast steel ladle, the relationship between cast number and the turnover number and turnover times and last turnover number are further analyzed. The simulation of steel ladle turnover rules was taken on the 2 continuous casters with Gantt chart. After that, the relationships between turnover number and last turnover number and non-turnover number are researched deeply. Combining with the Gantt chart, the expressions of start casting time and empty ladle ending time and heavy ladle starting time were put forward. The precondition of steel ladle interaction is obtained, which means the exchange ladle should not undertaking transport task in first stop continuous caster, and the empty ladle end time of exchange ladle of first stop continuous caster should early than the heavy ladle start time of last stop continuous caster. After applying the model to practice, 3 steel ladles of No.2 continuous caster can be reduced. This research results is supplying theoretical basis for steel ladle controlling and production organization optimization, and enriches the theory and method of metallurgical process integration.

Engineering study for a melting, casting, rolling and fabrication facility for recycled contaminated stainless steel

International Nuclear Information System (INIS)

1994-01-01

This Preliminary Report is prepared to study the facilities required for recycling contaminated stainless steel scrap into plate which will be fabricated into boxes suitable for the storage of contaminated wastes and rubble. The study is based upon the underlying premise that the most cost effective way to produce stainless steel is to use the same processes employed by companies now in production of high quality stainless steel. Therefore, the method selected for this study for the production of stainless steel plate from scrap is conventional process using an Electric Arc Furnace for meltdown to hot metal, a Continuous Caster for production of cast slabs, and a Reversing Hot Mill for rolling the slabs into plate. The fabrication of boxes from the plate utilizes standard Shears, Punch Presses and welding equipment with Robotic Manipulators. This Study presumes that all process fumes, building dusts and vapors will be cycled through a baghouse and a nuclear grade HEPA filter facility prior to discharge. Also, all process waste water will be evaporated into the hot flue gas stream from the furnace utilizing a quench tank; so there will be no liquid discharges from the facility and all vapors will be processed through a HEPA filter. Even though HEPA filters are used today in controlling radioactive contamination from nuclear facilities there is a sparsity of data concerning radioactivity levels and composition of waste that may be collected from contaminated scrap steel processing. This report suggests some solutions to these problems but it is recommended that additional study must be given to these environmental problems

Age-hardening susceptibility of high-Cr ODS ferritic steels and SUS430 ferritic steel

Energy Technology Data Exchange (ETDEWEB)

Chen, Dongsheng, E-mail: chen.dongsheng85@gmail.com [Graduate School of Energy Science, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan); Kimura, Akihiko; Han, Wentuo; Je, Hwanil [Institute of Advanced Energy, Kyoto University, Gokasho, Uji, Kyoto 611-0011 (Japan)

2015-10-15

Highlights: • The role of oxide particles in α/α′ phase decomposition behavior; microstructure of phase decomposition observed by TEM. • The characteristics of ductility loss caused by age-hardening. • Correlation of phase decomposition and age-hardening explained by dispersion strengthened models. • Age-hardening susceptibility of ODS steels and SUS430 steel. - Abstract: The effect of aging on high-Cr ferritic steels was investigated with focusing on the role of oxide particles in α/α′ phase decomposition behavior. 12Cr-oxide dispersion strengthened (ODS) steel, 15Cr-ODS steel and commercial SUS430 steel were isothermally aged at 475 °C for up to 10,000 h. Thermal aging caused a larger hardening in SUS430 than 15Cr-ODS, while 12Cr-ODS showed almost no hardening. A characteristic of the ODS steels is that the hardening was not accompanied by the significant loss of ductility that was observed in SUS430 steel. After aging for 2000 h, SUS430 steel shows a larger ductile–brittle transition temperature (DBTT) shift than 15Cr-ODS steel, which suggests that the age-hardening susceptibility is lower in 15Cr-ODS steel than in conventional SUS430 steel. Thermal aging leaded to a large number of Cr-rich α′ precipitates, which were confirmed by transmission electron microscopy (TEM). Correlation of age-hardening and phase decomposition was interpreted by Orowan type strengthening model. Results indicate that oxide particles cannot only suppress ductility loss, but also may influence α/α′ phase decomposition kinetics.

Basic survey project for Joint Implementation, etc. Blast furnace top pressure recovery turbine (TRT) project (Panzhihua Iron and Steel (Group) Company, People's Republic of China)

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

For the purpose of reducing greenhouse effect gas emissions, a feasibility study was conducted on the energy conservation at Panzhihua Iron and Steel Company in Sichuan Province, China. In this project, the pressure energy of blast furnace is to be recovered in the form of electric power by installing the blast furnace top pressure recovery turbine (TRT). In the project, the pressure-reducing valve was removed, and the dry dust collector/dry TRT were installed to make the scale of electric power production largest. A model of TRT was installed at No. 4 blast furnace and is now in operation. In this project, TRTs are to be installed at Nos. 1, 2 and 3 blast furnaces. As a result of the study, the investment totaled 5.46 billion yen. The capacity of power generation by TRT is 16,890 kW, and the generated output is 137,822 MWh/y. Moreover, the amount of energy conservation is 36,467 toe/y, and the reduction amount of greenhouse effect gas emissions is 112,830 CO2-ton/y. The term of investment recovery is 8.3 years. The effect of reduction in greenhouse effect gas emissions is 20.66 CO2-ton/y/million yen. (NEDO)

Composition and B-H curve analysis of low carbon steel from Krakatau Steel company using VSM And EDX for magnet design of 13 MeV cyclotron

International Nuclear Information System (INIS)

Taufik; Emy Mulyani; Kusminarto; Slamet Santosa

2012-01-01

Cyclotron is one type of particle accelerator that accelerate particle in circular trajectory, in order to obtain high kinetic energy. One of the main components is the cyclotron magnet system that serves to form a cyclic particle trajectories and made of forged low carbon steel. In the magnet design, the selection of magnetic materials is very important in determining whether cyclotron magnet can operate properly or not and even can be optimal. That is why we need to test samples of magnetic materials from local production in this case two samples of material produced by PT Krakatau Steel (KS). Tests performed include testing of BH curve using VSM (Vibrating Sample Magnetometer) and material composition using EDX (Energy-dispersive X-ray spectroscopy). Obtained BH curve is used as material data in three-dimensional simulation using the Opera 3D with referee to magnetic model of Kirams 13. From this study it can be concluded that the position of the test object to the direction of the magnetic field induction gives different BH curve and the samples obtained from KS has a carbon content which is still high. The lower the carbon content in the iron will produce a better magnetic properties. Material samples analyzed will produce a field that is not optimal when it is used in a 13 MeV cyclotron magnet. (author)

Evaluation of co-sourcing communications amongst international company and local public relations agencies (case company: company x)

OpenAIRE

Yin, Ying

2009-01-01

The subject of the thesis is the evaluation of co-sourcing communications amongst international company and local public relations agencies, taking the company x as a case. It analyses the environment the co-sourcing PR agencies communicate with international clients, compares with the current communications the case company has, and comes up with practical suggestions for the company to have better cooperation with local agencies to achieve mutual benefits. The theoretical part consi...

Nitrogen-alloyed martensitic steels

International Nuclear Information System (INIS)

Berns, H.

1988-01-01

A report is presented on initial results with pressure-nitrided martensitic steels. In heat-resistant steels, thermal stability and toughness are raised by nitrogen. In cold work steel, there is a more favourable corrosion behaviour. (orig./MM) [de

MICROALLOYED STEELS FOR THE AUTOMOTIVE INDUSTRY

Directory of Open Access Journals (Sweden)

Debanshu Bhattacharya

2014-12-01

Full Text Available Two major drivers for the use of newer steels in the automotive industry are fuel efficiency and increased safety performance. Fuel efficiency is mainly a function of weight of steel parts, which in turn, is controlled by gauge and design. Safety is determined by the energy absorbing capacity of the steel used to make the part. All of these factors are incentives for the U.S. automakers to use both Highly Formable and Advanced High Strength Steels (AHSS to replace the conventional steels used to manufacture automotive parts in the past. AHSS is a general term used to describe various families of steels. The most common AHSS is the dual-phase steel that consists of a ferrite-martensite microstructure. These steels are characterized by high strength, good ductility, low tensile to yield strength ratio and high bake hardenability. Another class of AHSS is the complex-phase or multi-phase steel which has a complex microstructure consisting of various phase constituents and a high yield to tensile strength ratio. Transformation Induced Plasticity (TRIP steels is another class of AHSS steels finding interest among the U.S. automakers. These steels consist of a ferrite-bainite microstructure with significant amount of retained austenite phase and show the highest combination of strength and elongation, so far, among the AHSS in use. High level of energy absorbing capacity combined with a sustained level of high n value up to the limit of uniform elongation as well as high bake hardenability make these steels particularly attractive for safety critical parts and parts needing complex forming. A relatively new class of AHSS is the Quenching and Partitioning (Q&P steels. These steels seem to offer higher ductility than the dual-phase steels of similar strengths or similar ductility as the TRIP steels at higher strengths. Finally, martensitic steels with very high strengths are also in use for certain parts. The most recent initiative in the area of AHSS

Notch aspects of RSP steel microstructure

Directory of Open Access Journals (Sweden)

Michal Černý

2012-01-01

Full Text Available For a rather long time, basic research projects have been focused on examinations of mechanical properties for Rapid Solidification Powder (RSP steels. These state-of-art steels are commonly known as “powdered steels“. In fact, they combine distinctive attributes of conventional steel alloys with unusual resistance of construction material manufactured by so called “pseudo-powdered” metallurgy.Choice of suitable materials for experimental verification was carried out based on characteristic application of so called “modern steel”. First, groups of stainless and tool steel types (steel grades ČSN 17 and 19 were selected. These provided representative specimens for the actual comparison experiment. For stainless steel type, two steel types were chosen: hardenable X47Cr14 (ČSN 17 029 stainless steel and non-hardenable X2CrNiMo18-14-3 (ČSN 17 350 steel. They are suitable e.g. for surgical tools and replacements (respectively. For tooling materials, C80U (ČSN 19 152 carbon steel and American D2 highly-alloyed steel (ČSN “equivalent” being 19 572 steel were chosen for the project. Finally, the M390 Böhler steel was chosen as representative of powdered (atomized steels. The goal of this paper is to discuss structural aspects of modern stainless and tool steel types and to compare them against the steel made by the RSP method. Based on the paper's results, impact of powdered steel structural characteristics on the resistance to crack initiation shall be evaluated.

Steel-reinforced concrete-filled steel tubular columns under axial and lateral cyclic loading

Science.gov (United States)

Farajpourbonab, Ebrahim; Kute, Sunil Y.; Inamdar, Vilas M.

2018-03-01

SRCFT columns are formed by inserting a steel section into a concrete-filled steel tube. These types of columns are named steel-reinforced concrete-filled steel tubular (SRCFT) columns. The current study aims at investigating the various types of reinforcing steel section to improve the strength and hysteresis behavior of SRCFT columns under axial and lateral cyclic loading. To attain this objective, a numerical study has been conducted on a series of composite columns. First, FEM procedure has been verified by the use of available experimental studies. Next, eight composite columns having different types of cross sections were analyzed. For comparison purpose, the base model was a CFT column used as a benchmark specimen. Nevertheless, the other specimens were SRCFT types. The results indicate that reinforcement of a CFT column through this method leads to enhancement in load-carrying capacity, enhancement in lateral drift ratio, ductility, preventing of local buckling in steel shell, and enhancement in energy absorption capacity. Under cyclic displacement history, it was observed that the use of cross-shaped reinforcing steel section causes a higher level of energy dissipation and the moment of inertia of the reinforcing steel sections was found to be the most significant parameter affecting the hysteresis behavior of SRCFT columns.

Structural amorphous steels

International Nuclear Information System (INIS)

Lu, Z.P.; Liu, C.T.; Porter, W.D.; Thompson, J.R.

2004-01-01

Recent advancement in bulk metallic glasses, whose properties are usually superior to their crystalline counterparts, has stimulated great interest in fabricating bulk amorphous steels. While a great deal of effort has been devoted to this field, the fabrication of structural amorphous steels with large cross sections has remained an alchemist's dream because of the limited glass-forming ability (GFA) of these materials. Here we report the discovery of structural amorphous steels that can be cast into glasses with large cross-section sizes using conventional drop-casting methods. These new steels showed interesting physical, magnetic, and mechanical properties, along with high thermal stability. The underlying mechanisms for the superior GFA of these materials are discussed

Prospects of structural steels

International Nuclear Information System (INIS)

Bannykh, O.A.

2012-01-01

The current state of world steel production is considered as well as the development strategy of metallurgy industry in the Russian Federation through to 2020. The main factors determining the conservation of steel as perspective material for industry are given: energy expenses on production, the well-proven recirculation technology, the capability of changing steel properties in wide range, temperature range of operation. The conclusion is made that in the immediate future steel will not lose its importance [ru

Oxidation of 316 stainless steel and other alloys in prototypic GCFR environments

International Nuclear Information System (INIS)

Acharya, R.T.

1980-05-01

The oxidation behavior of type 316 stainless steel and candidate advanced alloys for the gas-cooled fast reactor (GCFR) is being investigated at General Atomic Company. The test program consists of oxidation tests in prototypic GCFR environments. Two tests have been completed to date and a third test is under way. The first test was performed in an environment containing a hydrogen/water ratio of 10. The oxidation behavior of all the alloys was good to excellent in this environment. Preferential oxidation of chromium was responsible for this behavior. The second test was performed in an environment containing a hydrogen/water ratio of 0.25, where both chromium and iron oxides are thermodynamically stable. Some of the alloys and some of the ribbed type 316 stainless steel test specimens showed unacceptable oxidation resistance in this environment. In the third test, presently under way, two different pretreatment procedures are being used to control the poor oxidation behavior observed in the second test. Early results show some degree of success

Mechanical properties and fatigue strength of high manganese non-magnetic steel/carbon steel welded joints

International Nuclear Information System (INIS)

Nakaji, Eiji; Ikeda, Soichi; Kim, You-Chul; Nakatsuji, Yoshihiro; Horikawa, Kosuke.

1997-01-01

The dissimilar materials welded joints of high manganese non-magnetic steel/carbon steel (hereafter referred to as DMW joints), in which weld defects such as hot crack or blowhole are not found, were the good quality. Tensile strength of DMW joints was 10% higher than that of the base metal of carbon steel. In the bend tests, the DMW joints showed the good ductility without crack. Charpy absorbed energy at 0(degC) of the DMW joints was over 120(J) in the bond where it seems to be the lowest. Large hardening or softening was not detected in the heat affected zone. Fatigue strength of the DMW joints is almost the same with that of the welded joints of carbon steel/carbon steel. As the fatigue strength of the DMW joints exceeds the fatigue design standard curve of JSSC for carbon steel welded joints, the DMW joints can be treated the same as the welded joints of carbon steel/carbon steel of which strength is lower than that of high manganese non-magnetic steel, from the viewpoint of the fatigue design. (author)

Stainless steel rail, which is the first goods for JIS, is developed; Hatsu no JIS taiohin dearu sutenresureru wo kaihatsu

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-08-15

Daido Steel Co., Ltd. developed `the pond bottom rail` of the sewage disposal place and which is suitable for the gate door rail and so on, and tied up with Osaka steel manufacturing, and merchandised what was based on JIS in Japan for the first time. As for Daido Steel Co., Ltd.`s merchandising it, 3 kinds that it is called with rail of the weight 9kg 15kg 22kg. Though SUS 304 is a basis, quality of the material accepts production with SUS 316 which increased corrosions, SUS 304 N 2 of the high strength, and so on corresponding to the use for the user, too. Though Nippon Steel Corp. is producing an extreme small quantity at present by the pushing out method of construction, big says that the rail of the form that it is based on the JIS standard from the restriction of acid equipment and so on was merchandised as the stainless steel rail for the first time. Though the adoption of No. The 1st has already been decided as the pond bottom rail for the precipitation pond of the sewage disposal facilities 22kg by the stainless steel rail, substitution needs from the iron are opened up in the same company in an attraction and a crane, the rail for the elevator, the gate door rail, and so on during the water of the theme park. (translated by NEDO)

Damascus steel ledeburite class

Science.gov (United States)

Sukhanov, D. A.; Arkhangelsky, L. B.; Plotnikova, N. V.

2017-02-01

Discovered that some of blades Damascus steel has an unusual nature of origin of the excess cementite, which different from the redundant phases of secondary cementite, cementite of ledeburite and primary cementite in iron-carbon alloys. It is revealed that the morphological features of separate particles of cementite in Damascus steels lies in the abnormal size of excess carbides having the shape of irregular prisms. Considered three hypotheses for the formation of excess cementite in the form of faceted prismatic of excess carbides. The first hypothesis is based on thermal fission of cementite of a few isolated grains. The second hypothesis is based on the process of fragmentation cementite during deformation to the separate the pieces. The third hypothesis is based on the transformation of metastable cementite in the stable of angular eutectic carbide. It is shown that the angular carbides are formed within the original metastable colony ledeburite, so they are called “eutectic carbide”. It is established that high-purity white cast iron is converted into of Damascus steel during isothermal soaking at the annealing. It was revealed that some of blades Damascus steel ledeburite class do not contain in its microstructure of crushed ledeburite. It is shown that the pattern of carbide heterogeneity of Damascus steel consists entirely of angular eutectic carbides. Believe that Damascus steel refers to non-heat-resistant steel of ledeburite class, which have similar structural characteristics with semi-heat-resistant die steel or heat-resistant high speed steel, differing from them only in the nature of excess carbide phase.

Micro-Abrasion Wear Resistance of Borided 316L Stainless Steel and AISI 1018 Steel

Science.gov (United States)

Reséndiz-Calderon, C. D.; Rodríguez-Castro, G. A.; Meneses-Amador, A.; Campos-Silva, I. E.; Andraca-Adame, J.; Palomar-Pardavé, M. E.; Gallardo-Hernández, E. A.

2017-11-01

The 316L stainless steel has high corrosion resistance but low tribological performance. In different industrial sectors (biomedical, chemical, petrochemical, and nuclear engineering), improvement upon wear resistance of 316L stainless steel components using accessible and inexpensive methods is critical. The AISI 1018 steel is widely used in industry, but its tribological performance is not the best among steels. Therefore, in this study the behavior of the borided 316L stainless steel and 1018 steel is evaluated under micro-abrasion wear. The boriding was carried out at 1223 K over 6 h of exposure time, resulting in a biphase layer composed of FeB/Fe2B phases. In order to evaluate Fe2B phase with no influence from FeB phase, AISI 1018 steel samples were borided at 1273 K for over 20 min and then diffusion annealed at 1273 K over 2 h to obtain a Fe2B mono-phase layer. Micro-abrasion wear resistance was evaluated by a commercial micro-abrasion testing rig using a mix of F-1200 SiC particles with deionized water as abrasive slurry. The obtained wear rates for FeB and Fe2B phases and for the 316L stainless steel were compared. Wear resistance of 316L stainless steel increases after boriding. The wear mechanisms for both phases and for the stainless steel were identified. Also, transient conditions for rolling and grooving abrasion were determined for the FeB and Fe2B phases.

Health, safety and environmental unit performance assessment model under uncertainty (case study: steel industry).

Science.gov (United States)

Shamaii, Azin; Omidvari, Manouchehr; Lotfi, Farhad Hosseinzadeh

2017-01-01

Performance assessment is a critical objective of management systems. As a result of the non-deterministic and qualitative nature of performance indicators, assessments are likely to be influenced by evaluators' personal judgments. Furthermore, in developing countries, performance assessments by the Health, Safety and Environment (HSE) department are based solely on the number of accidents. A questionnaire is used to conduct the study in one of the largest steel production companies in Iran. With respect to health, safety, and environment, the results revealed that control of disease, fire hazards, and air pollution are of paramount importance, with coefficients of 0.057, 0.062, and 0.054, respectively. Furthermore, health and environment indicators were found to be the most common causes of poor performance. Finally, it was shown that HSE management systems can affect the majority of performance safety indicators in the short run, whereas health and environment indicators require longer periods of time. The objective of this study is to present an HSE-MS unit performance assessment model in steel industries. Moreover, we seek to answer the following question: what are the factors that affect HSE unit system in the steel industry? Also, for each factor, the extent of impact on the performance of the HSE management system in the organization is determined.

Stahlschüssel key to steel

CERN Document Server

Wegst, W S

2016-01-01

The Key to Steel (Stahlschlüssel/Stahlschluessel) cross reference book will help you to decode / decipher steel designations and find equivalent materials worldwide. The 2016 edition includes more than 70,000 standard designations and trade names from approximately 300 steelmakers and suppliers. Presentation is trilingual: English, French, and German. Materials covered include structural steels, tool steels, valve steels, high temperature steels and alloys, stainless and heat-resisting steels, and more. Standards and designations from 25 countries are cross-referenced.

Methods of forging steel

OpenAIRE

Pečoler, Primož

2014-01-01

The following work presents processes of steel forming, challenges when forging steel, forming machines suitable for forging and which choice of machine is most suitable for forging. We can separate steel forming to free forging and drop forging. Free forging can be divided to hand forging and machine forging. The correct choice of furnaces is also very important. We must reach correct temperature in the furnace for raw steel to melt with less scalings. In diploma I mentioned some machine...

Overview of superplastic forming research at ford motor company

Science.gov (United States)

Friedman, P. A.; Luckey, S. G.; Copple, W. B.; Allor, R.; Miller, C. E.; Young, C.

2004-12-01

In an effort to reduce vehicle weight, the automotive industry has switched to aluminum sheet for many closure panels. Although the application of aluminum is compatible with existing manufacturing processes and has attractive qualities such as low density, good mechanical properties, and high corrosion resistance, it has less room-temperature formability than steel. The expanded forming limits that are possible with superplastic forming can significantly improve the ability to manufacture complex shapes from materials with limited formability. Aluminum closure panels produced by superplastic forming have been used by Ford Motor Company for over a decade. However, applications have been limited to low-volume, specialty vehicles due to the relatively slow cycle time and the cost penalty associated with the specially processed sheet alloys. While there has been substantial research on the superplastic characteristics of aluminum alloys, the bulk of this work has focused on the development of aerospace alloys, which are often too costly and perhaps inappropriate for automotive applications. Additionally, there has been a limited amount of work done to develop the technologies required to support the higher production volumes of the automotive industry. This work presents an automotive perspective on superplastic forming and an overview of the research being performed at Ford Motor Company to increase the production volume so superplastic forming can be cost competitive with more traditional forming technologies.

Allegheny County Walk Scores

Data.gov (United States)

Allegheny County / City of Pittsburgh / Western PA Regional Data Center — Walk Score measures the walkability of any address using a patented system developed by the Walk Score company. For each 2010 Census Tract centroid, Walk Score...

Evaluating the effectiveness of a 360-degree performance appraisal and feedback in a selected steel organisation / Koetlisi Eugene Lithakong

OpenAIRE

Lithakong, Koetlisi Eugene

2014-01-01

Most companies are competing in the diverse global markets, and competitive advantage through human capital is becoming very important. Employee development for high productivity and the use of effective tools to measure their performance are therefore paramount. One such tool is the 360-degree performance appraisal system. The study on the effectiveness of the 360-degree performance appraisal was conducted on a selected steel organisation. The primary objective of the research...

Survey on the scrap iron and steel recycling in Thailand and Indonesia; Hatten tojokoku (Tai Indonesia) ni okeru tetsu scrap saiseiyo ni kansuru chosa

Energy Technology Data Exchange (ETDEWEB)

NONE

1997-03-01

This report describes the survey results of the scrap iron and steel recycling industries in Thailand and Indonesia. The purpose of this survey is to extract problems obstructing the scrap iron and steel recycling, to recognize the present situation and predict the future situation, and to examine the possibility of international cooperation. As a result of the survey, it was found that the quality of scrap collected in the domestic market is poor as it contains too many impurities for it to be utilized for the manufacture of many higher quality iron and steel products. The actual quantity of domestically collected scrap is too low to support the expected growth in demand in each nation. Current environmental management practices are largely concerned with the construction of wastewater treatment facilities and the extraction of furnace dust. However, the lack of enforcement of environmental regulations does not encourage companies to implement sound environmental practices. Neither government actively promotes and investigates iron and steel recycling in the domestic, commercial or industrial sectors. Collaboration with overseas nations having more advanced iron and steel industries could be helpful to the scrap recycling industry in both nations. 6 figs., 21 tabs.

Corrosion characteristics of DMR-1700 steel and comparison with different steels in marine environment

International Nuclear Information System (INIS)

Gurrappa, I.; Malakondaiah, G.

2005-01-01

In the present paper, a systematic corrosion study has been carried out on DMR-1700 steel to understand the protective nature of oxide scale that forms on its surface under marine environmental conditions. Further, the studies related to oxide scales as well as pitting and crevice corrosion resistance of both stainless steels and widely used low alloy steel EN24 in marine environment have been studied for comparison purpose. The surface morphologies of corroded steels have been observed under scanning electron microscope (SEM) in order to understand the nature of corrosion. A high performance protective coating that has been developed for protection of low alloy steels DMR-1700 and EN24 against corrosion is presented after stressing the importance of surface engineering in enhancing the life of steels. Based on the studies with different techniques, DMR-1700 steel has been recommended for manufacture of components used in aerospace systems in association with appropriate protective coating for improving their efficiency

Characterization of D2 tool steel friction surfaced coatings over low carbon steel

International Nuclear Information System (INIS)

Sekharbabu, R.; Rafi, H. Khalid; Rao, K. Prasad

2013-01-01

Highlights: • Solid state coating by friction surfacing method. • D2 tool steel is coated over relatively softer low carbon steel. • Defect free interface between tool steel coating and low carbon steel substrate. • D2 coatings exhibited higher hardness and good wear resistance. • Highly refined martensitic microstructure in the coating. - Abstract: In this work D2 tool steel coating is produced over a low carbon steel substrate using friction surfacing process. The process parameters are optimized to get a defect free coating. Microstructural characterization is carried out using optical microscopy, scanning electron microscopy and X-ray diffraction. Infrared thermography is used to measure the thermal profile during friction surfacing of D2 steel. Wear performance of the coating is studied using Pin-on-Disk wear tests. A lower rotational speed of the consumable rod and higher translational speed of the substrate is found to result in thinner coatings. Friction surfaced D2 steel coating showed fine-grained martensitic microstructure compared to the as-received consumable rod which showed predominantly ferrite microstructure. Refinement of carbides in the coating is observed due to the stirring action of the process. The infrared thermography studies showed the peak temperature attained by the D2 coating to be about 1200 °C. The combined effect of martensitic microstructure and refined carbides resulted in higher hardness and wear resistance of the coating

Refining technology for the recycling of stainless steel radioactive scrap metals, FY 94 bi-annual report

International Nuclear Information System (INIS)

Mizia, R.E.; Atteridge, D.G.; Buckentin, J.; Carter, J.; Davis, H.L.; Devletian, J.H.; Scholl, M.R.; Turpin, R.B.; Webster, S.L.

1994-08-01

The research addressed under this project is the recycling of metallic nuclear-related by-product materials under the direction of Westinghouse Idaho Nuclear Company (WINCO). The program addresses the recycling of radioactive scrap metals (RSM) for beneficial re-use within the DOE complex; in particular, this program addresses the recycling of stainless steel RSM. It is anticipated that various stainless steel components under WINCO control at the Idaho Falls Engineering Laboratory (INEL), such as fuel pool criticality barriers and fuel storage racks will begin to be recycled in FY94-95. The end product of this recycling effort is expected to be waste and overpack canisters for densified high level waste for the Idaho Waste Immobilization Facility and/or the Universal Canister System for dry (interim) storage of spent fuel. The specific components of this problem area that are presently being, or have been, addressed by CAAMSEC are: (1) the melting/remelting of stainless steel RSM into billet form; (2) the melting/remelting initial research focus will be on the use of radioactive surrogates to study; (3) the cost effectiveness of RSM processing oriented towards privatization of RSM reuse and/or resale. Other components of this problem that may be addressed under program extension are: (4) the melting/remelting of carbon steel; (5) the processing of billet material into product form which shall meet all applicable ASTM requirements; and, (6) the fabrication of an actual prototypical product; the present concept of an end product is a low carbon Type 304/316 stainless steel cylindrical container for densified and/or vitrified high level radioactive waste and/or the Universal Canister System for dry (interim) storage of spent fuel. The specific work reported herein covers the melting/remelting of stainless steel open-quotes scrapclose quotes metal into billet form and the study of surrogate material removal effectiveness by various remelting techniques

Methods of making bainitic steel materials

Science.gov (United States)

Bakas, Michael Paul; Chu, Henry Shiu-Hung; Zagula, Thomas Andrew; Langhorst, Benjamin Robert

2018-01-16

Methods of making bainitic steels may involve austenitizing a quantity of steel by exposing the quantity of steel to a first temperature. A composition of the quantity of steel may be configured to impede formation of non-bainite ferrite, pearlite, and Widmanstatten ferrite. The quantity of steel may be heat-treated to form bainite by exposing the quantity of steel to a second, lower temperature. The second, lower temperature may be stabilized by exposing the quantity of steel to the second, lower temperature in the presence of a thermal ballast.

Milled Die Steel Surface Roughness Correlation with Steel Sheet Friction

DEFF Research Database (Denmark)

Berglund, J.; Brown, C.A.; Rosén, B.-G.

2010-01-01

This work investigates correlations between the surface topography ofmilled steel dies and friction with steel sheet. Several die surfaces were prepared by milling. Friction was measured in bending under tension testing. Linear regression coefficients (R2) between the friction and texture...

Steels from materials science to structural engineering

CERN Document Server

Sha, Wei

2013-01-01

Steels and computer-based modelling are fast growing fields in materials science as well as structural engineering, demonstrated by the large amount of recent literature. Steels: From Materials Science to Structural Engineering combines steels research and model development, including the application of modelling techniques in steels.  The latest research includes structural engineering modelling, and novel, prototype alloy steels such as heat-resistant steel, nitride-strengthened ferritic/martensitic steel and low nickel maraging steel.  Researchers studying steels will find the topics vital to their work.  Materials experts will be able to learn about steels used in structural engineering as well as modelling and apply this increasingly important technique in their steel materials research and development. 

17 CFR 270.3a-3 - Certain investment companies owned by companies which are not investment companies.

Science.gov (United States)

2010-04-01

... the definition of the term “investment company” by section 3(b)(1) or 3(b)(2) of the Act (15 U.S.C... 17 Commodity and Securities Exchanges 3 2010-04-01 2010-04-01 false Certain investment companies owned by companies which are not investment companies. 270.3a-3 Section 270.3a-3 Commodity and...

Microstructural characterisation and corrosion performance of old railway girder bridge steel and modern weathering structural steel

International Nuclear Information System (INIS)

Tewary, N.K.; Kundu, A.; Nandi, R.; Saha, J.K.; Ghosh, S.K.

2016-01-01

Highlights: • Microstructure and corrosion performance are compared for two structural steels. • Microstructure evolution shows primarily ferrite-pearlite in both the steels. • Steels show higher corrosion rate in 1% HCl solution than in 3.5% NaCl solution. • The corrosion products show the presence of oxide, hydroxide and oxy-hydroxides. • The corroded surface reveals morphologies like flowery, cotton balls and rosette. - Abstract: A comparison on microstructure and corrosion performance has been made between the two structural steels used in old railway girder bridge (Sample A) and modern grades of weathering structural steel (Sample B). The microstructures, viewed under optical microscope and scanning electron microscope (SEM), show mainly ferrite-pearlite phase constituents in both the steels, A and B. The phase fraction analysis shows higher amount of pearlite in steel A compared to that of steel B. The grain size of steel A is larger than that of steel B under identical processing condition. The immersion corrosion test in 3.5% NaCl shows that the corrosion rate of steel A increases with time, while the same for steel B decreases with time. On the other hand, corrosion test in 1% HCl shows that the corrosion rate of both steel A and B is higher as compared to that of NaCl which always decreases with time. The XRD analysis of corrosion products show the presence of many oxides, hydroxide and oxy-hydroxide like Lepidocrocite (γ-FeOOH), Goethite (α-FeOOH), Akaganeite (β-FeOOH), Magnetite (Fe_3O_4) and Maghemite (γ-Fe_2O_3) in both the steels. The SEM images of corroded surfaces reveal different morphologies like flowery, cotton balls and rosette etc. which indicate that the corrosion products primarily contain Lepidocrocite (γ-FeOOH), Goethite (α-FeOOH) and Akaganeite (β-FeOOH).

Vulnerability studies and integrated assessments for hazard risk reduction in Pittsburgh, PA (Invited)

Science.gov (United States)

Klima, K.

2013-12-01

Today's environmental problems stretch beyond the bounds of most academic disciplines, and thus solutions require an interdisciplinary approach. For instance, the scientific consensus is changes in the frequency and severity of many types of extreme weather events are increasing (IPCC 2012). Yet despite our efforts to reduce greenhouse gases, we continue to experience severe weather events such as Superstorm Sandy, record heat and blizzards, and droughts. These natural hazards, combined with increased vulnerability and exposure, result in longer-lasting disruptions to critical infrastructure and business continuity throughout the world. In order to protect both our lives and the economy, we must think beyond the bounds of any one discipline to include an integrated assessment of relevant work. In the wake of recent events, New York City, Washington, DC, Chicago, and a myriad of other cities have turned to their academic powerhouses for assistance in better understanding their vulnerabilities. This talk will share a case study of the state of integrated assessments and vulnerability studies of energy, transportation, water, real estate, and other main sectors in Pittsburgh, PA. Then the talk will use integrated assessment models and other vulnerability studies to create coordinated sets of climate projections for use by the many public agencies and private-sector organizations in the region.

Microstructural characterization in dissimilar friction stir welding between 304 stainless steel and st37 steel

International Nuclear Information System (INIS)

Jafarzadegan, M.; Feng, A.H.; Abdollah-zadeh, A.; Saeid, T.; Shen, J.; Assadi, H.

2012-01-01

In the present study, 3 mm-thick plates of 304 stainless steel and st37 steel were welded together by friction stir welding at a welding speed of 50 mm/min and tool rotational speed of 400 and 800 rpm. X-ray diffraction test was carried out to study the phases which might be formed in the welds. Metallographic examinations, and tensile and microhardness tests were used to analyze the microstructure and mechanical properties of the joint. Four different zones were found in the weld area except the base metals. In the stir zone of the 304 stainless steel, a refined grain structure with some features of dynamic recrystallization was evidenced. A thermomechanically-affected zone was characterized on the 304 steel side with features of dynamic recovery. In the other side of the stir zone, the hot deformation of the st37 steel in the austenite region produced small austenite grains and these grains transformed to fine ferrite and pearlite and some products of displacive transformations such as Widmanstatten ferrite and martensite by cooling the material after friction stir welding. The heat-affected zone in the st37 steel side showed partially and fully refined microstructures like fusion welding processes. The recrystallization in the 304 steel and the transformations in the st37 steel enhanced the hardness of the weld area and therefore, improved the tensile properties of the joint. - Highlights: ► FSW produced sound welds between st37 low carbon steel and 304 stainless steel. ► The SZ of the st37 steel contained some products of allotropic transformation. ► The material in the SZ of the 304 steel showed features of dynamic recrystallization. ► The finer microstructure in the SZ increased the hardness and tensile strength.

Smart Companies.

Science.gov (United States)

Galagan, Patricia A.

1997-01-01

Capturing and leveraging knowledge is an important new management trend that is as yet undefined. Some companies are accounting for their intellectual capital and applying it to the company balance sheets. (JOW)

Decontamination and decarburization of stainless and carbon steel by melt refining

International Nuclear Information System (INIS)

Mizia, R.E.; Worcester, S.A.; Twidwell, L.G.; Webber, D.; Paolini, D.J.; Weldon, T.A.

1996-01-01

With many nuclear reactors and facilities being decommissioned in the next ten to twenty years the concern for handling and storing Radioactive Scrap Metal (RSM) is growing. Upon direction of the DOE Office of Environmental Restoration and Waste Management, Lockheed Idaho Technology Company (LITCO) is developing technologies for the conditioning of spent fuels and high-level wastes for interim storage and repository acceptance, including the recycling of Radioactive Scrap Metals (RSM) for beneficial reuse with the DOE complex. In February 1993, Montana Tech of the University of Montana was contracted to develop and demonstrate technologies for the decontamination of stainless steel RSM. The general objectives of the Montana Tech research program included conducting a literature survey, performing laboratory scale melt refining experiments to optimize decontaminating slag compositions, performing an analysis of preferred melting techniques, coordinating pilot scale and commercial scale demonstrations, and producing sufficient quantities of surrogate-containing material for all of the laboratory, pilot and commercial scale test programs. Later on, the program was expanded to include decontamination of carbon steel RSM. Each research program has been completed, and results are presented in this report

Comparison of the performance of concrete-filled steel tubular and hollow steel diagrid buildings

Science.gov (United States)

Peter, Minu Ann; S, Sajith A.; Nagarajan, Praveen

2018-03-01

In the recent construction scenario, diagrid structures are becoming a popular high-rise building structural system. Diagrid structures consist of diagonals in the perimeter and an interior core. The corner and interior vertical columns are not required due to the structural efficiency of diagrid structural systems. Steel and concrete are commonly used material for diagrid. An alternate material for diagrid is concrete-filled steel tube (CFST). CFST incorporates the advantages of both steel and concrete. In CFST, the inward buckling of the steel tube is effectively prevented by the filled concrete. The compressive strength of concrete increases due to the tri-axial state of stress in concrete induced by the steel tube. The longitudinal as well as lateral reinforcement to the concrete core is also provided by the steel tube. This paper compares the performance of CFST and steel diagrid buildings using linear static analysis. For this purpose, a 12 storey and 36 storey building are analysed using finite element method and CFST diagrid building is found to perform better.

Hydrogen gas embrittlement of stainless steels mainly austenitic steels. Volumes 1 and 2

International Nuclear Information System (INIS)

Azou, P.

1988-01-01

Steel behavior in regard to hydrogen is examined especially austenitic steels. Gamma steels are studied particularly the series 300 with various stabilities and gamma steels with improved elasticity limit for intermetallic phase precipitation and nitrogen additions. A two-phase structure γ + α' is also studied. All the samples are tested for mechanical behavior in gaseous hydrogen. Influence of metallurgical effects and of testing conditions on hydrogen embrittlement are evidenced. Microstructure resulting from mechanical or heat treatments, dislocation motion during plastic deformation and influence of deformation rate are studied in detail [fr

Some comments about the situation of the Steel Industry in the Arab Countries (Arab Steel Summit)

International Nuclear Information System (INIS)

Haidar, Y.; Astier, J.

2009-01-01

The Arab Steel Summit, that convened in Abu Dhabi in April, gave us another opportunity to review the situation of the Arab Iron and Steel Industry, with regard to the present World economic context. We will address: - the World situation of steel production, focusing on the Arab Countries; - the related situation of steel consumption; - the steel trade, including imports, exports and prices; - the consequences for technology and economy. (authors)

Challenges in Special Steel Making

Science.gov (United States)

Balachandran, G.

2018-02-01

Special bar quality [SBQ] is a long steel product where an assured quality is delivered by the steel mill to its customer. The bars have enhanced tolerance to higher stress application and it is demanded for specialised component making. The SBQ bars are sought for component making processing units such as closed die hot forging, hot extrusion, cold forging, machining, heat treatment, welding operations. The final component quality of the secondary processing units depends on the quality maintained at the steel maker end along with quality maintained at the fabricator end. Thus, quality control is ensured at every unit process stages. The various market segments catered to by SBQ steel segment is ever growing and is reviewed. Steel mills need adequate infrastructure and technological capability to make these higher quality steels. Some of the critical stages of processing SBQ and the critical quality maintenance parameters at the steel mill in the manufacture has been brought out.

Trends in steel technology

International Nuclear Information System (INIS)

Anon.

1980-01-01

Dual phase steels, composite products, and microalloyed steels are making inroads in the automotive industry applications for bumpers, automotive parts, bodies, mechanical parts, suspension and steering equipment and truck bumpers. New steels are also used to support solar mirrors and cells, in corrosive environments in the oil and gas industry, fusion reactors, and pressure vessels in nuclear power plants

Analysis of the Behaviour of Composite Steel and Steel Fiber Reinforced Concrete Slabs

Directory of Open Access Journals (Sweden)

Mindaugas Petkevičius

2011-04-01

Full Text Available There was a pending influence of steel fiber on the strength and stiffness of composite steel–concrete slabs under statical short–time load. Steel profiled sheeting and steel fiber reinforced concrete were used for specimens. Four composite slabs were made. Experimental investigations into the behaviour and influence of steel fiber reinforced concrete in composite slabs were conducted. Transverse, longitudinal, shear deformation and deflection of the slab were measured. The results indicated that the use of steel fiber in composite slabs was effective: strength was 20–24 % higher and the meanings of deflections under the action of the bending moment were 0,6MR (where MR is the bending moment at failure of the slabs and were 16–18 % lower for slabs with usual concrete. Article in Lithuanian

Characterization of naturally occurring radioactive materials and Cobald-60 contaminated ferrous scraps from steel industries

International Nuclear Information System (INIS)

Chao, H.E.; Chiu, H.S.; Hunga, J.Y.; His, H.W.; Chen, Y.B.

2002-01-01

Since the occurrence of radioactively contaminated rebar incident in 1992, steel industries in Taiwan were encouraged by Atomic Energy Council (AEC) to install portal monitor to detect the abnormal radiation in shipments of metal scrap feed. From 1994 through 1999, there were 53 discoveries of radioactivity in ferrous scraps by steel companies. These include 15 orphan radioactive sources, 16 cobalt-60 contaminated rebars, 20 Naturally Occurring Radioactive Material (NORM) contaminated scraps, and two unknowns. Most NORM-contaminated scraps were from abroad. The NORM and cobalt-60 contaminated scraps were taken from the steel mills and analyzed in laboratory. The analytical results of scales and sludge sampled from NORM-contaminated scraps combining with the circumstantial evidences indicate that five possible industrial processes may be involved. They are oil production and treatment, heavy mineral sand benefication and rare earth processing, copper mining and processing, recovery of ammonium chloride by lime adsorption in Ammonium-soda process, and tailing of uranium enrichment process. The cobalt-60 activity and trace elements concentrations of contaminated rebars confirm that all of them were produced domestically in the period from Oct. 1982 to Jan. 1983, when the cobalt-60 sources were lost and entered the electric arc furnace to produce the contaminated rebars. (author)

Domestic and foreign knowledge sources for innovation in internationalized Production Networks: the automotive and the iron and steel cases

Directory of Open Access Journals (Sweden)

Hernan Alejandro Morero

2015-02-01

Full Text Available This paper studies the relative relevance of domestic knowledge sources for innovation in internationalized production activities in an emerging economy. Two Production Networks from Argentina with a different kind of internationalization were considered: organized around subsidiaries of multinational companies (the automotive case and organized around local headquarters (the iron and steel case. A multiple factor analysis was carried out and cluster techniques were applied using a specific innovation survey done to 163 automotive and iron and steel firms from Argentina from the period of 2001 to2005, to evaluate the relative importance of domestic and foreign knowledge sources. The main finding is that in a production network organized around domestic headquarters the best innovative performance underrates the importance of international linkages, in comparison with networks organized around foreign subsidiaries.

MERGER ACCOUTING FOR COMPANIES

OpenAIRE

SUCIU GHEORGHE

2014-01-01

Companies, especially nowadays, are characterized through great mobility, fast circulation of capital, occurring in their chase for profit. In this context, companies look for alliances, economical and political assistance. These objectives can materialize through merging of companies. The merger can be internal (between Romanian companies) or transboundary, which includes foreign companies. In order to correctly reflect these events, the merger operations must be regulated and mu...

Ductile fracture of two-phase welds under 77K. [Steel-EhP810, steel-EhP666, steel-08Kh18N10T, steel-EhP659-VI, steel-chP810

Energy Technology Data Exchange (ETDEWEB)

Yushchenko, K.A.; Voronin, S.A.; Pustovit, A.I.; Shavel' , A.V.

The effect of the type of welding and fillers on crack resistance of welded joints high-strength steel EhP810 and its various compounds with steels EhP666, 08Kh18N10T has been studied. For the welding of steel EhP810 with steels EhP810, EhP666, 08Kh18N10T electron-beam, automatic, argon tungsten arc with non-consumable electrode with various fillers, as well as argon metal-arc welding with consumable electrode, were used. It is shown, that for a joint, made by electron-beam welding, parameters sigmasub(u), Ksub(IcJ), KCV are higher than for a joint of a similar phase structure made using filler wire EhP659-VI. It is explained by the fact, that during electron-beam welding joint metal refining takes place, which removes gases. In welded joints of chP810 steel, having joints with austenitic structure, characteristic of crack resistance Ssub(c) increases by more than 0.2 mm in contrast to two-phase joints, which conventional yield strength at 77 K exceeds 1000 MPa. It is worth mentioning, that for other classes of steels formation of two-phase structure of joint increases welded joint resistance to brittle fracture. It is possible to obtain the required structure of joint with assigned level of resistance to brittle fracture by means of the use of different fillers, optimum and welding procedure, regulating the part of the basic metal in joint content.

Steel Industry Wastes.

Science.gov (United States)

Schmidtke, N. W.; Averill, D. W.

1978-01-01

Presents a literature review of wastes from steel industry, covering publications of 1976-77. This review covers: (1) coke production; (2) iron and steel production; (3) rolling operations; and (4) surface treatment. A list of 133 references is also presented. (NM)

Fatigue damage of steel components

DEFF Research Database (Denmark)

Fæster, Søren; Zhang, Xiaodan; Huang, Xiaoxu

2014-01-01

Railway rails and the inner ring in roller bearings in wind turbines are both experiencing steel-to-steel contact in small areas with huge loads resulting in extremely high stresses in the base materials......Railway rails and the inner ring in roller bearings in wind turbines are both experiencing steel-to-steel contact in small areas with huge loads resulting in extremely high stresses in the base materials...

Corrosion of mild steel and stainless steel by marine Vibrio sp.

Digital Repository Service at National Institute of Oceanography (India)

PrabhaDevi; Wagh, A.B.

Microbially induced corrosion (MIC) of stainless steel and mild steel coupons exposed to media with and without a bacterial culture Vibrio sp. was studied using Scanning Electron Microscope (SEM). Pitting type of corrosion was noticed which was more...

The Study for Recycling NORM - Contaminated Steel Scraps from Steel Industry

International Nuclear Information System (INIS)

Tsai, K. F.; Lee, Y. S.; Chao, H. E.

2003-01-01

Since 1994, most of the major steel industries in Taiwan have installed portal monitor to detect the abnormal radiation in metal scrap feed. As a result, the discovery of NORM (Naturally Occurring Radioactive Material) has increased in recent years. In order to save the natural resources and promote radiation protection, an experimental melting process for the NORM contaminated steel scraps was carried out by the Institute of Nuclear Energy Research (INER) Taiwan, ROC. The experimental melting process has a pretreatment step that includes a series of cutting and removal of scales, sludge, as well as combustible and volatile materials on/in the steel scraps. After pretreatment the surface of the steel scraps are relatively clean. Then the scraps are melted by a pilot-type induction furnace. This experiment finally produced seven ingots with a total weight of 2,849 kg and 96.8% recovery. All of the surface dose rates are of the background values. The activity concentrations of these ingots are also below the regulatory criteria. Thus, these NORM-bearing steel scraps are ready for recycling. This study has been granted by the regulatory authority

Open Source Telecommunication Companies

Directory of Open Access Journals (Sweden)

Peter Liu

2007-08-01

Full Text Available Little is known about companies whose core business is selling telecommunications products that lever open source projects. Open source telecommunications (OST companies operate in markets that are very different from typical software product markets. The telecommunications market is regulated, vertically integrated, and proprietary designs and special chips are widely used. For a telecommunications product to be useful, it must interact with both access network products and core network products. Due to specifications in Service Agreements Levels, penalties for failures of telecommunications products are very high. This article shares information that is not widely known, including a list of OST companies and the open source projects on which they depend, the size and diversity of venture capital investment in OST companies, the nature of the commercial product-open source software and company-project relationships, ways in which OST companies make money, benefits and risks of OST companies, and competition between OST companies. Analysis of this information provides insights into the ways in which companies can build business models around open source software. These findings will be of interest to entrepreneurs, top management teams of incumbent companies that sell telecommunications products, and those who care about Ontario's ability to compete globally.

Steel: Price and Policy Issues

National Research Council Canada - National Science Library

Cooney, Stephen

2006-01-01

Steel prices remain at historically elevated levels. The rapid growth of steel production and demand in China is widely considered as a major cause of the increases in both steel prices and the prices of steelmaking inputs...

In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste

International Nuclear Information System (INIS)

Itty, Pierre-Adrien; Serdar, Marijana; Meral, Cagla; Parkinson, Dula; MacDowell, Alastair A.; Bjegović, Dubravka; Monteiro, Paulo J.M.

2014-01-01

Highlights: • The morphology of the corrosion of steel in cement paste was studied in situ. • During galvanostatic corrosion, carbon steel reinforcement corroded homogeneously. • On ferritic stainless steel, deep corrosion pits formed and caused wider cracks. • The measured rate of steel loss correlated well with Faraday’s law of electrolysis. - Abstract: In a X-ray microcomputed tomography study, active corrosion was induced by galvanostatically corroding steel embedded in cement paste. The results give insight into corrosion product build up, crack formation, leaching of products into the cracks and voids, and differences in morphology of corrosion attack in the case of carbon steel or stainless steel reinforcement. Carbon steel was homogeneously etched away with a homogeneous layer of corrosion products forming at the steel/cement paste interface. For ferritic stainless steel, pits were forming, concentrating the corrosion products locally, which led to more extensive damage on the cement paste cover

Fracture Mechanisms in Steel Castings

Directory of Open Access Journals (Sweden)

Stradomski Z.

2013-09-01

Full Text Available The investigations were inspired with the problem of cracking of steel castings during the production process. A single mechanism of decohesion - the intergranular one - occurs in the case of hot cracking, while a variety of structural factors is decisive for hot cracking initiation, depending on chemical composition of the cast steel. The low-carbon and low-alloyed steel castings crack due to the presence of the type II sulphides, the cause of cracking of the high-carbon tool cast steels is the net of secondary cementite and/or ledeburite precipitated along the boundaries of solidified grains. Also the brittle phosphor and carbide eutectics precipitated in the final stage solidification are responsible for cracking of castings made of Hadfield steel. The examination of mechanical properties at 1050°C revealed low or very low strength of high-carbon cast steels.

Employees Training Evaluation related to the Competency Standards in the Steel and Metalworking Industry in Boyacá, Colombia

Directory of Open Access Journals (Sweden)

Carlos Guillermo Carreno-Bodensiek

2016-12-01

Full Text Available This work presents the results of a research process applied to a sample of companies in the steel and metalworking sector in Boyacá, Colombia. The active workers are evaluated over the Occupational Competency Standards related to their daily activities. It also aims to highlight the formation priority of human talent for business, according to build up a level of competitiveness. Also, seeks to meet the need to train and develop skills and competencies in the workforce, taking into account the concepts of experts about training and developing proposals for management. This research is consistent with global trends in education and the requirements of standardization of training, why diagnoses and designs are focused on the functions of the companies related to the Standards of Competency.

On choice of tempered steels

International Nuclear Information System (INIS)

Govorov, A.A.; Pan'shin, I.F.; Rakhmanov, V.I.

1978-01-01

For the purpose of developing a graphical method for choosing structural steels, a change in the propagation work of a crack and in the critical temperature of brittleness of 40, 40Kh, 40KhN, and 40KhNM steels, was examined depending on the hardness after hardening and tempering. A diagram enabling to choose the grade of steel for making an article of known dimensions according to the preset values of its mechanical properties has been plotted. The developed selection scheme takes into account the hardenability of steels and the influence of the hardness after thermal treatment on the cold-shortness of steel

Experience of high-nitrogenous steel powder application in repairs and surface hardening of responsible parts for power equipment by plasma spraying

Science.gov (United States)

Kolpakov, A. S.; Kardonina, N. I.

2016-02-01

The questions of the application of novel diffusion-alloying high-nitrogenous steel powders for repair and surface hardening of responsible parts of power equipment by plasma spraying are considered. The appropriateness of the method for operative repair of equipment and increasing its service life is justified. General data on the structure, properties, and manufacture of nitrogen-, aluminum-, and chromium-containing steel powders that are economically alloyed using diffusion are described. It is noted that the nitrogen release during the decomposition of iron nitrides, when heating, protects the powder particles from oxidation in the plasma jet. It is shown that the coating retains 50% of nitrogen that is contained in the powder. Plasma spraying modes for diffusion-alloying high-nitrogenous steel powders are given. The service properties of plasma coatings based on these powders are analyzed. It is shown that the high-nitrogenous steel powders to a nitrogen content of 8.9 wt % provide the necessary wear resistance and hardness of the coating and the strength of its adhesion to the substrate and corrosion resistance to typical aggressive media. It is noted that increasing the coating porosity promotes stress relaxation and increases its thickness being limited with respect to delamination conditions in comparison with dense coatings on retention of the low defectiveness of the interface and high adhesion to the substrate. The examples of the application of high-nitrogenous steel powders in power engineering during equipment repairs by service companies and overhaul subdivisions of heat power plants are given. It is noted that the plasma spraying of diffusion-alloyed high-nitrogenous steel powders is a unique opportunity to restore nitrided steel products.

Volatilization from PCA steel alloy

Energy Technology Data Exchange (ETDEWEB)

Hagrman, D.L.; Smolik, G.R.; McCarthy, K.A.; Petti, D.A.

1996-08-01

The mobilizations of key components from Primary Candidate Alloy (PCA) steel alloy have been measured with laboratory-scale experiments. The experiments indicate most of the mobilization from PCA steel is due to oxide formation and spalling but that the spalled particles are large enough to settle rapidly. Based on the experiments, models for the volatization of iron, manganese, and cobalt from PCA steel in steam and molybdenum from PCA steel in air have been derived.

Risk of lung cancer according to mild steel and stainless steel welding

DEFF Research Database (Denmark)

Sørensen, Anita Rath; Thulstrup, Ane Marie; Hansen, Johnni

2007-01-01

OBJECTIVES: Whether the elevated risk of lung cancer observed among welders is caused by welding emissions or by confounding from smoking or asbestos exposure is still not resolved. This question was addressed in a cohort with a long follow-up and quantified estimates of individual exposure.......06-1.70)]. Among the stainless steel welders, the risk increased significantly with increasing accumulative welding particulate exposure, while no exposure-response relation was found for mild steel welders, even after adjustment for tobacco smoking and asbestos exposure. CONCLUSIONS: The study corroborates...... earlier findings that welders have an increased risk of lung cancer. While exposure-response relations indicate carcinogenic effects related to stainless steel welding, it is still unresolved whether the mild steel welding process carries a carcinogenic risk....

Review on Cold-Formed Steel Connections

Science.gov (United States)

Tan, Cher Siang; Mohammad, Shahrin; Md Tahir, Mahmood; Shek, Poi Ngian

2014-01-01

The concept of cold-formed light steel framing construction has been widespread after understanding its structural characteristics with massive research works over the years. Connection serves as one of the important elements for light steel framing in order to achieve its structural stability. Compared to hot-rolled steel sections, cold-formed steel connections perform dissimilarity due to the thin-walled behaviour. This paper aims to review current researches on cold-formed steel connections, particularly for screw connections, storage rack connections, welded connections, and bolted connections. The performance of these connections in the design of cold-formed steel structures is discussed. PMID:24688448

Physician-owned companies.

Science.gov (United States)

Kostuik, John P

2007-05-15

The author relates his experience in the development of a spinal implant development company (K2M) that is significantly advised by physicians. To provide information about the development of a spinal implant company (K2M) advised by a group of professional spinal surgeons. To relate the federal laws (STARK and anti-kickback) as they pertain to surgeon-influenced companies. To discuss the role of a scientific advisory board. A self-developed company was developed together with significant, but minority physician financial input and majority scientific advice. A privately owned spinal implant development corporation (K2M) was developed 3 years ago. Physician financial participation was less than 20% (Stark laws state no more than 40%). Users of product are greater than 60% non-investor physicians. The development of a large scientific advisory board has been very influential in product development. A privately owned spinal implant company (K2M) has been developed strictly within Federal laws. Its board of scientific advisors that receives recompense commissurate only with effort significantly impacts the company policy.

Radiation embrittlement of WWER 440 pressure vessel steel and of some improved steels by western producers

International Nuclear Information System (INIS)

Koutsky, J.; Vacek, M.; Stoces, B.; Pav, T.; Otruba, J.; Novosad, P.; Brumovsky, M.

1982-01-01

The resistance was studied of Cr-Mo-V type steel 15Kh2MFA to radiation embrittlement at an irradiation temperature of around 288 degC. Studied was the steel used for the manufacture of the pressure vessel of the Paks nuclear reactor in Hungary. The obtained results of radiation embrittlement and hardening of steel 15Kh2MFA were compared with similar values of Mn-Ni-Mo type steels A 533-B and A 508 manufactured by leading western manufacturers within the international research programme coordinated by the IAEA. It was found that the resistance of steel 15Kh2MFA to radiation embrittlement is comparable with steels A 533-B and A 508 by western manufacturers. (author)

A comparison of the iraddiated tensile properties of a high-manganese austenitic steel and type 316 stainless steel

International Nuclear Information System (INIS)

Klueh, R.L.; Grossbeck, M.L.

1984-01-01

The USSR steel EP-838 is a high-manganese, low-nickel steel that also has lower chromium and molybdenum than type 316 stainless steel. Tensile specimens of 20%-cold-worked EP-838 and type 316 stainless steel were irradiated in the High Flux Isotope Reactor (HFIR) at the coolant temperature (approx.=50 0 C). A displacement damage level of 5.2 dpa was reached for the EP-838 and up to 9.5 dpa for the type 316 stainless steel. Tensile tests at room temperature and 300 0 C on the two steels indicated that the irradiation led to increased strength and decreased ductility compared to the unirradiated steels. Although the 0.2% yield stress of the type 316 stainless steel in the unirradiated condition was greater than that for the EP-838, after irradiation there was essentially no difference between the strength or ductility of the two steels. The results indicate that the replacement of the majority of the nickel by manganese and a reduction of chromium and molybdenum in an austenitic stainless steel of composition near that for type 316 stainless steel has little effect on the irradiated and unirradiated tensile properties at low temperatures. (orig.)

Ductility of high chromium stainless steels

International Nuclear Information System (INIS)

Peretyat'ko, V.N.; Kazantsev, A.A.

1997-01-01

Aimed to optimize the hot working conditions for high chromium stainless steels the experiments were carried in the temperature range of 800-1300 deg C using hot torsion tests and cylindrical specimens of ferritic and ferritic-martensitic steels 08Kh13, 12Kh13, 20Kh13, 30Kh13 and 40Kh13. Testing results showed that steel plasticity varies in a wide range depending on carbon content. Steels of lesser carbon concentration (08Kh13 and 12Kh13) exhibit a sharp increase in plasticity with a temperature rise, especially in the interval of 1200-1250 deg C. Steels 20Kh13 and 30Kh13 display insignificant plasticity increasing, whereas plastic properties of steel 40Kh13 increase noticeably in the range of 1000-1300 deg C. It is shown that optimal hot working conditions for specific steel must be selected with account of steel phase composition at high temperatures

Steels for nuclear power. I

International Nuclear Information System (INIS)

Bohusova, O.; Brumovsky, M.; Cukr, B.; Hatle, Z.; Protiva, K.; Stefec, R.; Urban, A.; Zidek, M.

1976-01-01

The principles are listed of nuclear reactor operation and the reactors are classified by neutron energy, fuel and moderator designs, purpose and type of moderator. The trend and the development of light-water reactor applications are described. The fundamental operating parameters of the WWER type reactors are indicated. The effect is discussed of neutron radiation on reactor structural materials. The characteristics are described of steel corrosion due to the contact of the steel with steam or sodium in the primary coolant circuit. The reasons for stress corrosion are given and the effects of radiation on corrosion are listed. The requirements and criteria are given for the choice of low-alloy steel for the manufacture of pressure vessels, volume compensators, steam generators, cooling conduits and containment. A survey is given of most frequently used steels for pressure vessels and of the mechanical and structural properties thereof. The basic requirements for the properties of steel used in the primary coolant circuit are as follows: sufficient strength in operating temperature, toughness, good weldability, resistance to corrosion and low brittleness following neutron irradiation. The materials are listed used for the components of light-water and breeder reactors. The production of corrosion-resistant steels is discussed with a view to raw materials, technology, steel-making processes, melting processes, induction furnace steel-making, and to selected special problems of the chemical composition of steels. The effects are mainly discussed of lead, bismuth and tin as well as of some other elements on hot working of high-alloy steels and on their structure. The problems of corrosion-resistant steel welding and of pressure vessel cladding are summed up. Also discussed is the question of the concept and safeguards of the safety of nuclear installation operation and a list is presented of most commonly used nondestructive materials testing methods. The current

As (novas práticas pós-privatização de atuação comunitária em seis empresas do setor siderúrgico brasileiro The (new post-privatization practices of communitarian action in six companies of Brazilian steel industry

Directory of Open Access Journals (Sweden)

Rozália Del Gáudio Soares Baptista

2005-03-01

Full Text Available O objetivo deste trabalho é analisar como as empresas do setor siderúrgico brasileiro reorganizaram suas práticas de relacionamento com a comunidade após a privatização. Para isso, tendo como referenciais a teoria existente sobre responsabilidade social e um estudo exploratório baseado em dados quantitativos e qualitativos coletados sobre a situação das principais siderúrgicas privatizadas, pôde-se traçar um quadro ilustrativo da realidade do setor. Os principais resultados revelam que o papel desempenhado no passado por tais organizações vem se adaptando tanto às novas demandas e realidades socioeconômicas do país quanto à emergência da valorização das ações privadas como mecanismo compensatório das lacunas deixadas pela transformação do papel do Estado. O atual discurso sobre a responsabilidade social empresarial legitima as ações empreendidas pela iniciativa privada, o que, entretanto, não desobriga o Estado do seu papel fundamental de agente do desenvolvimento nacional, independentemente do porte da economia da região em foco.An analysis was made of how six Brazilian steel companies restructured their community relations after privatization. This description was based upon an exploratory study of quantitive and qualitative information regarding social responsibility obtained from the most important privatized steel companies and includes as a reference the currently expounded theory of social responsibility. Results disclose that past performance was adapted to the new requirements and socio-economic situation of the country and to enhance this private activity in order to make up for deficiencies in the wake of the changing role played by the government. The current discourse on these actions of social responsibility endorses these private undertakings and does not, however, free the government from the basic role of agent in national development, irrespective of the size of the regional economy in question.

VULNERABILITY OF COMPANIES

Directory of Open Access Journals (Sweden)

ARMEAN ANDREEA

2013-06-01

Full Text Available In present, the study of vulnerability of companies is increasing in every field due to the unstable economic environment influences. The object of this research is to define and identify vulnerabilities of companies and the establishment of evaluation methods at their level. This article emphasizes the importance and usefulness of one of the best known model in this way, from our point of view, namely Băileşteanu, Negrila Pattern. This pattern covers both external factors and internal ones, that increase vulnerabilities of companies, and fit the companies in which the state of vulnerability are (vitality, viability, vulnerability, high vulnerability, difficulty and high difficulty, with a matrix. The result of the research is that any company belonging to any field, can be analyzed using this model, and assigned to one of the conditions defined within.

The Danish East India Company

DEFF Research Database (Denmark)

Sørensen, Karsten Engsig

2005-01-01

The article analysis the first Danish East India Company incorporated in 1616, which was the first Danish Stock Company and which has impacts even on modern Danish company la......The article analysis the first Danish East India Company incorporated in 1616, which was the first Danish Stock Company and which has impacts even on modern Danish company la...

The industrial ecology of steel

Energy Technology Data Exchange (ETDEWEB)

Considine, Timothy J.; Jablonowski, Christopher; Considine, Donita M.M.; Rao, Prasad G.

2001-03-26

This study performs an integrated assessment of new technology adoption in the steel industry. New coke, iron, and steel production technologies are discussed, and their economic and environmental characteristics are compared. Based upon detailed plant level data on cost and physical input-output relations by process, this study develops a simple mathematical optimization model of steel process choice. This model is then expanded to a life cycle context, accounting for environmental emissions generated during the production and transportation of energy and material inputs into steelmaking. This life-cycle optimization model provides a basis for evaluating the environmental impacts of existing and new iron and steel technologies. Five different plant configurations are examined, from conventional integrated steel production to completely scrap-based operations. Two cost criteria are used to evaluate technology choice: private and social cost, with the latter including the environmental damages associated with emissions. While scrap-based technologies clearly generate lower emissions in mass terms, their emissions of sulfur dioxide and nitrogen oxides are significantly higher. Using conventional damage cost estimates reported in the literature suggests that the social costs associated with scrap-based steel production are slightly higher than with integrated steel production. This suggests that adopting a life-cycle viewpoint can substantially affect environmental assessment of new technologies. Finally, this study also examines the impacts of carbon taxes on steel production costs and technology choice.

Company Portfolios Answer the Question: What Do You Know about My Company?

Science.gov (United States)

Watson, Michelle L.

2001-01-01

Job seekers can demonstrate their knowledge of a potential employer by developing a company portfolio. Elements include company history, mission, values, and goals; size and location(s); financial status; and recent changes in the company and industry. (SK)

Study of Air Pollution Due to Plasma Cutting Process and Designing Local Ventilation System with Collector in Central Workshop of Mobarakeh Steel Company

Directory of Open Access Journals (Sweden)

Farideh Atabi

2014-06-01

Full Text Available Background & Objectives : Cutting leads to production of different hazardous agents such as fumes, particles, gases and vapors. In various studies, the effects of fumes, gases, and vapors on workers and environment have been proved. Meanwhile, cutting alloying plates with plasma cutting machine due to containing various alloy materials produces a lot of air pollution. Therefore, using the ventilation system to remove the mentioned pollution has always been noteworthy. Method: This study was performed on plasma cutting machine at Mobarakeh Steel Company. At first, according to ASTM the elements from alloy plates with optical emission spectrometry crm-35000-quantometery were detected, the air pollution from cutting the mentioned plates was sampled and measured using NIOSH 7300 method and according to the ACGIH:VS-72-20, VS-70-12, VS-70-11 VS-916 push-pull ventilation with bag filter collector was designed. Results: Results of sampling from pollution of cutting the alloy material, concentration of iron, lead and cadmium fumes were more than the standard limits. After calculation for push system, air flow volume of 195.163 cfm, outgoing air velocity of 5937.4 fpm and for pull system air flow volume of 12498 cfm, minimum duct velocity of 3000 fpm and velocity pressure of duct of 0.717 inwg, for fan, total pressure of 6.301 inwg, static pressure of 0.587 inwg and power of 20.65 Bhp and for collector with pulse jet cleaning system air to cloth ratio of 7 and dimensions of 6.88ft × 6.56ft × 9.84ft were obtained. Conclusion: The result of study indicated that push pull ventilation compared to other ventilation system s for plasma cutting has more efficiency and makes suitable control for pollution.

Advanced cold rolled steels for automotive applications

Energy Technology Data Exchange (ETDEWEB)

Hofmann, Harald; Mattissen, Dorothea; Schaumann, Thomas Wilhelm [ThyssenKrupp Steel AG, Center of Materials Excellence, Dortmund (Germany)

2009-01-15

Advanced high-strength steels offer a great potential for the further development of automobile bodies-in-white due to their combined mechanical properties of high formability and strength. They represent the first choice in material selection for strength and crash-relevant parts with challenging geometries. The intensive development of multiphase steels by ThyssenKrupp Steel has led to hot dip galvanizing concepts with an outstanding forming potential. Hot rolled, hot dip galvanized complex-phase steels are currently produced in addition to cold rolled dual phase (DP) and retained austenite (RA) or transformation induced plasticity (TRIP) steels. New continuously annealed grades of steel are being developed with tensile strength levels of up to 1000 MPa in combination with sufficient ductility for the high demands of structural automobile components. These steels make use of the classic advantages of microalloying as well as the principles of DP steels and RA / TRIP steels. Further improvement of properties will be reached by the new class of high manganese alloyed steels. (orig.)

Processing and refinement of steel microstructure images for assisting in computerized heat treatment of plain carbon steel

Science.gov (United States)

Gupta, Shubhank; Panda, Aditi; Naskar, Ruchira; Mishra, Dinesh Kumar; Pal, Snehanshu

2017-11-01

Steels are alloys of iron and carbon, widely used in construction and other applications. The evolution of steel microstructure through various heat treatment processes is an important factor in controlling properties and performance of steel. Extensive experimentations have been performed to enhance the properties of steel by customizing heat treatment processes. However, experimental analyses are always associated with high resource requirements in terms of cost and time. As an alternative solution, we propose an image processing-based technique for refinement of raw plain carbon steel microstructure images, into a digital form, usable in experiments related to heat treatment processes of steel in diverse applications. The proposed work follows the conventional steps practiced by materials engineers in manual refinement of steel images; and it appropriately utilizes basic image processing techniques (including filtering, segmentation, opening, and clustering) to automate the whole process. The proposed refinement of steel microstructure images is aimed to enable computer-aided simulations of heat treatment of plain carbon steel, in a timely and cost-efficient manner; hence it is beneficial for the materials and metallurgy industry. Our experimental results prove the efficiency and effectiveness of the proposed technique.

Laser cutting of thick steel plates and simulated steel components using a 30 kW fiber laser

International Nuclear Information System (INIS)

Tamura, Koji; Ishigami, Ryoya; Yamagishi, Ryuichiro

2016-01-01

Laser cutting of thick steel plates and simulated steel components using a 30 kW fiber laser was studied for application to nuclear decommissioning. Successful cutting of carbon steel and stainless steel plates up to 300 mm in thickness was demonstrated, as was that of thick steel components such as simulated reactor vessel walls, a large pipe, and a gate valve. The results indicate that laser cutting applied to nuclear decommissioning is a promising technology. (author)

Evaluation of strategic alliances based on D-S evidence theory of ship steel%基于D—S证据理论的船钢战略联盟模式评价研究

Institute of Scientific and Technical Information of China (English)

王炜

2012-01-01

我国造船企业和钢铁企业之间的战略联盟模式，大致可分为：协议型战略联盟模式、合作伙伴型战略联盟模式、合资共建船用钢材配送中心和入股参与型战略联盟模式。通过财务指标、柔性指标、风险指标和合作指标构建船钢战略联盟模式的评价指标体系，并运用D—S证据理论进行实证分析，目的是为造船企业和钢铁企业之间的联盟模式的选取提供借鉴。%The strategic alliance between China's shipbuilding companies and steel companies can be broadly divided into: protocol type strategic alliance, partner type strategic alliance mode, joint venture to build a ship steel distribution center and shares to participate in strategic alliance. Through financial index, flexible index, risk indicators and indicators of ship steel cooperation strategic alliance mode of evaluation index system, and using D-S evidence theory empirical analysis, is designed for shipbuilding and iron and steel enterprise alliance mode selecting reference.

Regulating Listed Companies: Between Company Law and Financial Market Law in Danish Law

DEFF Research Database (Denmark)

Clausen, Nis Jul

2011-01-01

The article discusses different elements and aspects of the regulation of listed companies in particular whether such regulation should be placed in company law or in financial marked law.......The article discusses different elements and aspects of the regulation of listed companies in particular whether such regulation should be placed in company law or in financial marked law....

O q de Tobin e o Setor Siderúrgico: um estudo em companhias abertas brasileiras e norte-americanasTobin’s q and Iron and Steel Companies: a study of Brazilian and North-American open companiesEl q de Tobin y el Sector Siderúrgico: un estudio de las compañías abiertas brasileñas y norteamericanas

Directory of Open Access Journals (Sweden)

NOGUEIRA, Igor Vasconcelos

2010-06-01

Full Text Available RESUMOModelos de avaliação de investimentos, que empregam medidas financeiras com base no mercado, como o q de Tobin, ainda são incipientes na literatura nacional. Assim, o presente trabalho tem por objetivo analisar o comportamento do q de Tobin para Companhias Siderúrgicas Brasileiras e Norte-americanas, com ações negociadas na BOVESPA e NYSE, apresentando um estudo econométrico sobre alguns de seus principais determinantes macro e microeconômicos no período de 1997 a 2005. O q de Tobin calculado para as empresas brasileiras selecionadas apresentou-se crescente ao longo do período selecionado. Em relação ao q de Tobin para as empresas norte-americanas, verificou-se que este indicador foi menor que 1, demonstrando um desestímulo a novos investimentos. A análise econométrica realizada indicou que, as variáveis econômicas tais como a taxa de juros, a taxa de desemprego e o nível de produção industrial foram fatores de influência determinantes para explicar o comportamento do q de Tobin, tanto para as empresas brasileiras como para as empresas norte-americanas. Conclui-se que este indicador captura informações relevantes dos principais determinantes macro e microeconômicos do setor siderúrgico, destacando o seu potencial para a análise financeira deste setor.ABSTRACTModels for investment evaluation that employ financial measures based on the market such as Tobin's q, are still scarce in the national literature. Therefore, the present work aims to analyze the behavior of Tobin's q for Brazilian and North American iron and steel companies present in the stock market at BOVESPA and NYSE, by presenting an econometric study on some of its key macroeconomic and microeconomic determinants from 1997 to 2005. Tobin's q calculated for selected Brazilian companies revealed to be increasing over the selected period. Regarding Tobin’s q for U.S. companies, it was verified that such indicator was less than 1, thus pointing to a

Survey and comparison of sleep quality among fixed and changing shift staff in a steel factory in Tehran, Iran.

Science.gov (United States)

Mohammadian, Farugh; Abbasinia, Marzieh; Rahmani, Abdolrasoul; Monazzam, Mohammad Reza; Asghari, Mehdi; Ahmadnezhad, Iman; Asadi, Ali

2013-01-01

Given the hazardous nature of the work in steel factories and that the staff has to deal with hazardous equipment and machines, improper sleep quality and drowsiness among the works tackles performance and boosts rate of job accidents. This study is aimed to survey the quality of sleep and sleepiness status and the pertinent factors among the workers in a rolling mill and a steel production company in Tehran, Iran. In a Cross-Sectional study 2011, 180 workers were selected randomly from a rolling mill and a steel production company in Tehran. A questionnaire was designed to collect demographic data and variables of work condition. Pitersborg's sleep quality questionnaire was used to survey quality and problems of Participants' sleep. Epworth Sleepiness questionnaire was used to deals with sleepiness during work, studying, watching TV, or during time spent in public. Average score of sleep quality for the fixed shift staff and changing shift staff were 7.5±2.82 and 8.49±2.95 respectively. Surveys of sleep quality for the two groups of the participants based on T-test showed a significant difference between the two groups so that the changing shift staff group suffered poorer sleep quality (p=0.03). Comparison of average drowsiness scores between the two groups of participants based on Mann-Whitney test showed no significant difference (p>0.005). Chi square test showed a significant difference between severity of drowsiness and type of working shift (p =0.028 and 0.009). Staff in revolving shifts suffers poor sleep quality comparing with staff with fixed working shift. Moreover, type of working shift greatly affects severity of drowsiness as staff at different work shift experienced different level of sleepiness. It is essential to survey sleep disorder of the staff in the industry and pay more emphasis on sleep disorder epidemic in other fields of industry.

77 FR 20882 - Manning Grain Company; Acquisition and Operation Exemption; Fillmore Western Railway Company

Science.gov (United States)

2012-04-06

... DEPARTMENT OF TRANSPORTATION Surface Transportation Board [Docket No. FD 35612] Manning Grain Company; Acquisition and Operation Exemption; Fillmore Western Railway Company Manning Grain Company (MGC... Docket No. FD 35607, Manning Rail, Inc.--Acquisition and Operation Exemption--Manning Grain Company...

Electrochemical Corrosion Behavior of Carbon Steel and Hot Dip Galvanized Steel in Simulated Concrete Solution with Different pH Values

Directory of Open Access Journals (Sweden)

Wanchen XIE

2017-08-01

Full Text Available Hot dip galvanizing technology is now widely used as a method of protection for steel rebars. The corrosion behaviors of Q235 carbon steel and hot galvanized steel in a Ca(OH2 solution with a pH from 10 to 13 was investigated by electrode potential and polarization curves testing. The results indicated that carbon steel and hot galvanized steel were all passivated in a strong alkaline solution. The electrode potential of hot dip galvanized steel was lower than that of carbon steel; thus, hot dip galvanized steel can provide very good anodic protection for carbon steel. However, when the pH value reached 12.5, a polarity reversal occurred under the condition of a certain potential. Hot dip galvanized coating became a cathode, and the corrosion of carbon steel accelerated. The electrochemical behaviors and passivation abilities of hot dip galvanized steel and carbon steel were affected by pH. The higher the pH value was, the more easily they were passivated.DOI: http://dx.doi.org/10.5755/j01.ms.23.3.16675

Steel alloys

International Nuclear Information System (INIS)

Bloom, E.E.; Stiegler, J.O.; Rowcliffe, A.F.; Leitnaker, J.M.

1977-01-01

The invention deals with a fuel element for fast breeder reactors. It consits essentially of a uranium oxide, nitride, or carbide or a mixture of these fuels with a plutonium or thorium oxide, nitride, or carbide. The fuel elements are coated with an austenitic stainless steel alloy. Inside the fuel elements, vacancies or small cavities are produced by neutron effects which causes the steel coating to swell. According to the invention, swelling is prevented by a modification of type 304, 316, 321, or 12 K 72HV commercial steels. They consist mainly of Fe, Cr, and Ni in a ratio determined by a temary diagram. They may also contain 1.8 to 2.3% by weight of Mo and a fraction of Si (0.7 to 2% by weight) and Ti(0.10 to 0.5% by weight) to prevent cavity formation. They are structurally modified by cold working. (IHOE) [de

MERGER ACCOUTING FOR COMPANIES

Directory of Open Access Journals (Sweden)

SUCIU GHEORGHE

2014-05-01

Full Text Available Companies, especially nowadays, are characterized through great mobility, fast circulation of capital, occurring in their chase for profit. In this context, companies look for alliances, economical and political assistance. These objectives can materialize through merging of companies. The merger can be internal (between Romanian companies or transboundary, which includes foreign companies. In order to correctly reflect these events, the merger operations must be regulated and must respect national and international regulations. One important request concerning the merger operations is that the accounting values of the assets, debts and ownership equity must be brought to the present financial value.

Clean steels for fusion

International Nuclear Information System (INIS)

Gelles, D.S.

1995-03-01

Fusion energy production has an inherent advantage over fission: a fuel supply with reduced long term radioactivity. One of the leading candidate materials for structural applications in a fusion reactor is a tungsten stabilized 9% chromium Martensitic steel. This alloy class is being considered because it offers the opportunity to maintain that advantage in the reactor structure as well as provide good high temperature strength and radiation induced swelling and embrittlement resistance. However, calculations indicate that to obtain acceptable radioactivity levels within 500 years after service, clean steel will be required because the niobium impurity levels must be kept below about 2 appm and nickel, molybdenum, nitrogen, copper, and aluminum must be intentionally restricted. International efforts are addressing the problems of clean steel production. Recently, a 5,000 kg heat was vacuum induction melted in Japan using high purity commercial raw materials giving niobium levels less than 0.7 appm. This paper reviews the need for reduced long term radioactivity, defines the advantageous properties of the tungsten stabilized Martensitic steel class, and describes the international efforts to produce acceptable clean steels

Thermal stability of manganese-stabilized stainless steels

International Nuclear Information System (INIS)

Klueh, R.L.; Kenik, E.A.

1993-01-01

Previous work on a series of experimental high-manganese reduced-activation austenitic stainless steels demonstrated that they have improved tensile properties relative to type 316 stainless steel in both the annealed and 20% cold-worked conditions. Steels were tested with an Fe-20Mn-12Cr-0.25C (in weight percent) base composition, to which various combinations of Ti, W, V, P, and B were added. Tensile tests have now been completed on these steels after thermal aging at 600 degrees C. Thermal stability varied with composition, but the alloys were as stable or more stable than type 316 stainless steel. the strength of the annealed steels increased slightly after aging to 5000 h, while a strength decrease occurred for the cold worked steel. In both conditions, a steel containing a combination of all the alloying elements was most stable and had the best strength after thermal aging 5000 h at 600 degrees C. Despite having much higher strength than 316 stainless steel after aging, the ductility of the strongest experimental alloy was still as good as that of 316 stainless steel

Countries and companies

International Nuclear Information System (INIS)

Jenning, J.S.

1990-01-01

The trends and factors currently emerging are likely to have significant influence on the way the upstream oil and gas industry evolves in the coming decade. This paper discusses how these trends might influence events in the 1990s, particularly how they might influence relationships between host countries and companies in the oil industry. State owned companies will dominate the industry in resource terms. These statcos fall into three groups: a small group of technically able, financially sound, well-managed companies; a group of consumer statcos that have limited domestic production but significant domestic demand; a large group that are finding it difficult to maintain their production facilities in good standing to maximize recovery from their resources. This paper describes the future private sector as consisting of the Surviving Sisters and smaller, private companies very active in the upstream. How will these various players behave in the years to come? Conventional activity in the upstream will continue as companies seek to optimize their upstream portfolios

Use of steel slag as a new material for roads

Science.gov (United States)

Ochoa Díaz, R.; Romero Farfán, M.; Cardenas, J.; Forero, J.

2017-12-01

This research paper aims to analyse the behaviour of MDC-19 hot dense asphalt mixtures with steel slag as coarse aggregate, by using asphalt 80-100, in order to verify if this residue has suitable characteristics that allow its use. The physical and mechanical characterization was accomplished using phosphorous slag from the company Acerías Paz del Río S.A. The working formula was then determined for each mixture using the RAMCODES methodology, the briquettes were produced in the laboratory and then, the design verification was performed. Taking into account the results obtained, it is concluded that the use of phosphorous slag as coarse aggregate in asphalt mixtures is workable, since acceptable design parameters and verification are obtained that meet the specifications for use as a rolling layer.

FY 1999 report on the fundamental investigation for promotion of Joint Implementation. Blast furnace top pressure recovery turbine (TRT) project for China's Panzhihua Iron and Steel (Group) Company; 1999 nendo Chugoku Panzhihua kotetsu (shudan) koji koro rochoatsu hatsuden setsubi (TRT) project

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-03-01

Feasibility study is conducted for introduction of a top pressure recovery turbine (TRT) in China's Panzhihua Iron and Steel (Group) Company, Sichuan Province, for the potential project to simultaneously contribute to abatement of the greenhouse effect gases and to sustainable economic development of the counterpart country. This project considers to adopt the TRTs in 3 blast furnaces (No.1 to 3) of the 4 furnaces in service at the works, producing 2,500,000 t/y of crude steel, where the No.4 furnace is already provided with the model system and not considered in this project. According to the feasibility study results, the total fund required is 5.46 billion yen (Japan-made facilities: 4.172 billion yen, and China-made facilities: 1.288 billion yen), energy-saving effect is 36,467 t/y as crude, greenhouse effect gas emission abatement effect: 112,830 t/y as CO2, and pay-off period is 8.3 years. This plan considers to adopt almost the same facilities as those for the model project on a commercial basis. The taxes will be applied to the Japan-made facilities at a rate of 30% or more, although they were free for the model project, which should squeeze the investment effects. For the TRT project to be realized, low-interest fund is essential, and environmental yen loans will be necessary. (NEDO)

Global oil company profiles

International Nuclear Information System (INIS)

1997-01-01

Global Oil Company Profiles provides a comprehensive review of 50 of the top oil companies in the world. Each chapter is devoted to an individual company, providing an invaluable insight into the organisation, its structure and operations. Using the most recent data available, the report offers an up-to-date analysis of performance and future direction, as well as a unique benchmarking system for each company profiled. (author)

Sliding wear characteristics of carburized steels and thermally refined steels implanted with nitrogen ions

International Nuclear Information System (INIS)

Terashima, Keiichi; Koda, Hiroyuki; Takeuchi, Eiichi.

1995-01-01

In order to concretely examine the application of surface reforming by ion implantation, nitrogen ion implantation was applied to the thermally refined steels S45C and SCM440 and the carburized steel SCM415, which are high versatile steels for mechanical structures, and their friction and wear characteristics were examined. The results are summarized as follows. In the surface-reformed material, in which nitrogen was implanted for the purpose of improving the seizure durability of the carburized steel, the load-frictional coefficient curve in lubricated sliding friction was similar to that of the material without implantation, but it was recognized that the load at which seizure occurred reached 2000 kgf or more, and as the amount of implantation was more, the material withstood higher load. In the lubricated sliding friction using a pin-ring type wear testing machine of the thermally refined steels and those to which implantation was applied, it was recognized that the specific wear amount was less in the implanted steels than in those without implantation. The results of the analysis of the implanted surface layers and the friction surfaces are reported. (K.I.)

SAFER - Company Snapshot

Data.gov (United States)

Department of Transportation — The Company Snapshot is a concise electronic record of company identification, size, commodity information, and safety record, including the safety rating (if any),...

Larson-Miller Constant of Heat-Resistant Steel

Science.gov (United States)

Tamura, Manabu; Abe, Fujio; Shiba, Kiyoyuki; Sakasegawa, Hideo; Tanigawa, Hiroyasu

2013-06-01

Long-term rupture data for 79 types of heat-resistant steels including carbon steel, low-alloy steel, high-alloy steel, austenitic stainless steel, and superalloy were analyzed, and a constant for the Larson-Miller (LM) parameter was obtained in the current study for each material. The calculated LM constant, C, is approximately 20 for heat-resistant steels and alloys except for high-alloy martensitic steels with high creep resistance, for which C ≈ 30 . The apparent activation energy was also calculated, and the LM constant was found to be proportional to the apparent activation energy with a high correlation coefficient, which suggests that the LM constant is a material constant possessing intrinsic physical meaning. The contribution of the entropy change to the LM constant is not small, especially for several martensitic steels with large values of C. Deformation of such martensitic steels should accompany a large entropy change of 10 times the gas constant at least, besides the entropy change due to self-diffusion.

Properties of hot rolled steels for enamelling

International Nuclear Information System (INIS)

Gavrilovski, Dragica; Gavrilovski, Milorad

2003-01-01

The results of an investigation of the structure and properties of experimental produced hot rolled steels suitable for enamelling are presented in the paper. Hot rolled steels for enamelling represent a special group of the steels for conventional enamelling. Their quality has to be adapted to the method and conditions of enamelling. Therefore, these steels should meet some specific requirements. In addition to usual investigation of the chemical composition and mechanical properties, microstructure and quality of the steel surface also were investigated. The basic aim was to examine steels capability for enamelling, i. e. steels resistance to the fish scales phenomena, by trial enamelling, as well as quality of the steel - enamel contact surface, to evaluate the binding. Also, the changes of the mechanical properties, especially the yield point, during thermal treatment, as a very specific requirement, were investigated, by simplified method. Good results were obtained confirming the steels capability for enamelling. (Original)

Reduced-activation steels: present status and future development

International Nuclear Information System (INIS)

Klueh, R.L.

2007-01-01

Full text of publication follows: Reduced-activation steels for fusion reactor applications were developed in the 1980's to replace the commercial elevated- temperature steels first considered. In the United States, this involved replacing Sandvik HT9 and modified 9Cr-1Mo steels. Reduced-activation steels, which were developed for more rapid radioactivity decay following exposure in a fusion neutron environment, were patterned after the commercial steels they were to replace. The objective for the reduced-activation steels was that they have strengths (yield stress and ultimate tensile strength from room temperature to 600 deg. C) and impact toughness (measured in a Charpy test) comparable to or better than the steels they were replacing. That objective was achieved in reduced-activation steels developed in Japan, Europe, and the United States. Since the reduced-activation steels were developed in the 1980's, reactor designers have been interested designs for increased efficiency of future fusion plants. This means reactors will need to operate at higher temperatures-above 550 deg. C, which is the upper-temperature limit for the reduced-activation steels. Although the tensile and impact toughness of the reduced-activation steels exceed those of the commercial steels they were patterned after, their creep-rupture properties are inferior to some of the commercial steels they replaced. furthermore, they are much inferior to commercial steels that have been developed since the 1980's. Reasons for why the creep-rupture properties for the new commercial ferritic/martensitic steels are superior to the earlier commercial steels and the reduced-activation steels were examined. The reasons involve compositional changes that were made in the earlier commercial steels to give the new commercial steels their superior properties. Computational thermodynamics calculations were carried out to compare the expected equilibrium phases. It appears that similar changes in composition

In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste

KAUST Repository

Itty, Pierre-Adrien

2014-06-01

In a X-ray microcomputed tomography study, active corrosion was induced by galvanostatically corroding steel embedded in cement paste. The results give insight into corrosion product build up, crack formation, leaching of products into the cracks and voids, and differences in morphology of corrosion attack in the case of carbon steel or stainless steel reinforcement. Carbon steel was homogeneously etched away with a homogeneous layer of corrosion products forming at the steel/cement paste interface. For ferritic stainless steel, pits were forming, concentrating the corrosion products locally, which led to more extensive damage on the cement paste cover. © 2014 Elsevier Ltd.

In situ 3D monitoring of corrosion on carbon steel and ferritic stainless steel embedded in cement paste

KAUST Repository

Itty, Pierre-Adrien; Serdar, Marijana; Meral, Cagla; Parkinson, Dula; MacDowell, Alastair A.; Bjegović, Dubravka; Monteiro, Paulo J.M.

2014-01-01

In a X-ray microcomputed tomography study, active corrosion was induced by galvanostatically corroding steel embedded in cement paste. The results give insight into corrosion product build up, crack formation, leaching of products into the cracks and voids, and differences in morphology of corrosion attack in the case of carbon steel or stainless steel reinforcement. Carbon steel was homogeneously etched away with a homogeneous layer of corrosion products forming at the steel/cement paste interface. For ferritic stainless steel, pits were forming, concentrating the corrosion products locally, which led to more extensive damage on the cement paste cover. © 2014 Elsevier Ltd.

Scientific and Technological Principles of Development of New Cold-Resistant Arc-Steels (Steels for Arctic Applications)

Science.gov (United States)

Sych, O. V.; Khlusova, E. I.; Yashin, E. A.

2017-12-01

The paper presents the results of quantitative analysis of C, Mn, Ni and Cu content on strength and cold-resistance of rolled plates. Relations between the ferritic-bainitic structure morphology and anisotropy and steel performance characteristics have been established. Influence of thermal and deformation rolling patterns on steel structure has been studied. The steel chemical composition has been improved and precision thermomechanical processing conditions for production of cold-resistant Arc-steel plates have been developed.

Irradiation embrittlement of pressure vessel steels

International Nuclear Information System (INIS)

Brumovsky, M.; Vacek, M.

1975-01-01

A Standard Research Programme on Irradiation Embrittlement of Pressure Vessel Steels was approved by the Coordinating Meeting on the 12th May 1972 at the Working Group on Engineering Aspects of Irradiation Embrittlement of Pressure Vessel Steels. This Working Group was set up by the International Atomic Energy Agency in Vienna. Seven countries with their research institutes agreed on doing irradiation experiments according to the approved programme on steel A533 B from the U.S. HSST Programme. The Czechoslovak contribution covering tensile and impact testing of non-irradiated steel and steel irradiated at 280degC to 1.3 x 10 23 n/m 2 (E above 1 MeV) is presented in this report. As an additional part the same set of experiments was carried out on two additional steels - A 542 and A 543, made in SKODA Works for comparison of their irradiation embrittlement and hardening with A533 B steel. (author)

Heat treatments in a conventional steel to reproduce the microstructure of a nuclear grade steel

International Nuclear Information System (INIS)

Rosalio G, M.

2014-01-01

The ferritic steels used in the manufacture of pressurized vessels of Boiling Water Reactors (BWR) suffer degradation in their mechanical properties due to damage caused by the neutron fluxes of high energy bigger to a Mega electron volt (E> 1 MeV) generated in the reactor core. The materials with which the pressurized vessels of nuclear reactors cooled by light water are built correspond to low alloy ferritic steels. The effect of neutron irradiation on these steels is manifested as an increase in hardness, mechanical strength, with the consequent decrease in ductility, fracture toughness and an increase in temperature of ductile-brittle transition. The life of a BWR is 40 years, its design must be considered sufficient margin of safety because pressure forces experienced during operation, maintenance and testing of postulated accident conditions. It is necessary that under these conditions the vessel to behave ductile and likely to propagate a fracture is minimized. The vessels of light water nuclear reactors have a bainite microstructure. Specifically, the reactor vessels of the nuclear power plant of Laguna Verde (Veracruz, Mexico) are made of a steel Astm A-533, Grade B Class 1. At present they are carrying out some welding tests for the construction of a model of a BWR, however, to use nuclear grade steel such as Astm A-533 to carry out some of the welding tests, is very expensive; perform these in a conventional material provides basic information. Although the microstructure present in the conventional material does not correspond exactly to the degree of nuclear material, it can take of reference. Therefore, it is proposed to conduct a pilot study to establish the thermal treatment that reproduces the microstructure of nuclear grade steel, in conventional steel. The resulting properties of the conventional steel samples will be compared to a JRQ steel, that is a steel Astm A-533, Grade B Class 1, provided by IAEA. (Author)

Building America Case Study: High-Velocity Small-Diameter Duct System, Pittsburgh, Pennsylvania

Energy Technology Data Exchange (ETDEWEB)

2017-04-01

This study tests the performance of a variable airflow small-diameter duct heating, ventilation, and air conditioning (HVAC) system in a new construction unoccupied low-load test house in Pittsburgh, Pennsylvania. The duct system was installed entirely in conditioned space and was operated from the winter through summer seasons. Measurements were collected on the in-room temperatures and energy consumed by the air handler and heat pump unit. Operation modes with three different volumes of airflow were compared to determine the ideal airflow scenario that maximizes room-to-room thermal uniformity while minimizing fan energy consumption. Black felt infrared imagery was used as a measure of diffuser throw and in-room air mixing. Measured results indicate the small-diameter, high velocity airflow system can provide comfort under some conditions. Solar heat gains resulted in southern rooms drifting beyond acceptable temperature limits. Insufficient airflow to some bedrooms also resulted in periods of potential discomfort. Homebuilders or HVAC contractors can use these results to assess whether this space conditioning strategy is an attractive alternative to a traditional duct system. The team performed a cost analysis of two duct system configurations: (1) a conventional diameter and velocity duct system, and (2) the small-diameter duct system. This work applies to both new and retrofit homes that have achieved a low heating and cooling density either by energy conservation or by operation in a mild climate with few heating or cooling degree days. Guidance is provided on cost trade-offs between the conventional duct system and the small-diameter duct system.

Controlling DC permeability in cast steels

Energy Technology Data Exchange (ETDEWEB)

Sumner, Aaran, E-mail: aaran.sumner@nottingham.ac.uk [University of Nottingham, Nottingham University Park Campus, Nottingham NG7 2RD, England (United Kingdom); Gerada, Chris, E-mail: chris.gerada@nottingham.ac.uk [Electrical Machines, University of Nottingham, Tower Building, Nottingham NG7 2RD, England (United Kingdom); Brown, Neil, E-mail: neil.brown@cummins.com [Advanced Electrical Machines Research and Technology at Cummins Power Generation, Peterborough PE2 6FZ, England (United Kingdom); Clare, Adam, E-mail: adam.clare@nottingham.ac.uk [Advanced Manufacturing, University of Nottingham, University Park Campus, Nottingham NG7 2RD, England (United Kingdom)

2017-05-01

Annealing (at multiple cooling rates) and quenching (with tempering) was performed on specimens of cast steel of varying composition. The aim was to devise a method for selecting the steel with the highest permeability, from any given range of steels, and then increasing the permeability by heat treatment. Metallographic samples were imaged using optical microscopy to show the effect of the applied heat treatments on the microstructure. Commonly cast steels can have DC permeability altered by the careful selection of a heat treatment. Increases of up to 381% were achieved by annealing using a cooling rate of 6.0 °C/min. Annealing was found to cause the carbon present in the steel to migrate from grain boundaries and from within ferrite crystals into adjacent pearlite crystals. The migration of the carbon resulted in less carbon at grain boundaries and within ferrite crystals reducing the number of pinning sites between magnetic domains. This gives rise to a higher permeability. Quenching then tempering was found to cause the formation of small ferrite crystals with the carbon content of the steel predominately held in the martensitic crystal structures. The results show that with any given range of steel compositions the highest baseline DC permeability will be found with the steel that has the highest iron content and the lowest carbon content. For the samples tested in this paper a cooling rate of 4.5 °C/min resulted in the relative permeability of the sample with the highest baseline permeability, AS4, increasing from 783 to 1479 at 0.5 T. This paper shows how heat treatments commonly applied to hypoeutectoid cast steels, to improve their mechanical performance, can be used to also enhance electromagnetic properties of these alloys. The use of cast steels allows the creation of DC components for electrical machines not possible by the widely used method of stacking of electrical grade sheet steels. - Highlights: • A range of structural steels had their

Controlling DC permeability in cast steels

International Nuclear Information System (INIS)

Sumner, Aaran; Gerada, Chris; Brown, Neil; Clare, Adam

2017-01-01

Annealing (at multiple cooling rates) and quenching (with tempering) was performed on specimens of cast steel of varying composition. The aim was to devise a method for selecting the steel with the highest permeability, from any given range of steels, and then increasing the permeability by heat treatment. Metallographic samples were imaged using optical microscopy to show the effect of the applied heat treatments on the microstructure. Commonly cast steels can have DC permeability altered by the careful selection of a heat treatment. Increases of up to 381% were achieved by annealing using a cooling rate of 6.0 °C/min. Annealing was found to cause the carbon present in the steel to migrate from grain boundaries and from within ferrite crystals into adjacent pearlite crystals. The migration of the carbon resulted in less carbon at grain boundaries and within ferrite crystals reducing the number of pinning sites between magnetic domains. This gives rise to a higher permeability. Quenching then tempering was found to cause the formation of small ferrite crystals with the carbon content of the steel predominately held in the martensitic crystal structures. The results show that with any given range of steel compositions the highest baseline DC permeability will be found with the steel that has the highest iron content and the lowest carbon content. For the samples tested in this paper a cooling rate of 4.5 °C/min resulted in the relative permeability of the sample with the highest baseline permeability, AS4, increasing from 783 to 1479 at 0.5 T. This paper shows how heat treatments commonly applied to hypoeutectoid cast steels, to improve their mechanical performance, can be used to also enhance electromagnetic properties of these alloys. The use of cast steels allows the creation of DC components for electrical machines not possible by the widely used method of stacking of electrical grade sheet steels. - Highlights: • A range of structural steels had their

STEFINS: a steel freezing integral simulation program

International Nuclear Information System (INIS)

Frank, M.V.

1980-09-01

STEFINS (STEel Freezing INtegral Simulation) is a computer program for the calculation of the rate of solidification of molten steel on solid steel. Such computations arize when investigating core melt accidents in fast reactors. In principle this problem involves a coupled two-dimensional thermal and hydraulic approach. However, by physically reasonable assumptions a decoupled approach has been developed. The transient solidification of molten steel on a cold wall is solved in the direction normal to the molten steel flow and independent from the solution for the molten steel temperature and Nusselt number along the direction of flow. The solutions to the applicable energy equations have been programmed in cylindrical and slab geometries. Internal gamma heating of steel is included

Nitrogen-containing steels and thermomechanical treatment

International Nuclear Information System (INIS)

Kaputkina, L.; Prokoshkina, V.G.; Svyazhin, G.

2004-01-01

The strengthening of nitrogen-containing corrosion-resistant steels resulting from alloying and thermomechanical treatment have been investigated using X-ray diffraction analysis, light microscopy, hardness measurements and tensile testing. Combined data have been obtained for nitrogen interaction with alloying elements , peculiarities of deformed structure and short-range of nitrogen-containing steels of various structural classes. The higher nitrogen and total alloying element contents, the higher deformation strengthening. Prospects of use the steels with not high nitrogen content and methods of their thermomechanical strengthening are shown. High temperature thermomechanical treatment (HTMT) is very effective for obtaining high and thermally stable constructional strength of nitrogen-containing steels of all classes. The HTMT is most effective if used in a combination with dispersion hardening for aging steels or in the case of mechanically unstable austenitic steels. (author)

Contamination assessment of heavy metals in the soils around Khouzestan Steel Company (KSC (Ni, Mn, Pb, Fe, Zn, Cr

Directory of Open Access Journals (Sweden)

Fatemeh hormozi Nejad

2017-02-01

Full Text Available Introduction Soil plays a vital role in human life as the very survival of mankind is tied to the preservation of soil productivity (Kabata- Pendies and Mukherjee, 2007. The purpose of this study is the assessment of heavy metal contamination (Zn, Mn, Pb, Fe, Ni, Cr of the soil around the Khuzestan Steel Complex. Materials and methods For this purpose, 13 surface soil samples (0-10 cm were taken. Also a control sample was taken from an area away from the steel complex. The coordinates of each point were recorded by Global Positioning System (GPS. The samples were transferred to the laboratory and then were air dried at room temperature for 72 hours. Then they were sieved through a 2mm sieve for determining physical and chemical parameters (soil texture, pH, OC, and a 63-micron sieve for measurement of heavy metal concentration. pH was measured using a calibrated pH meter at a 2: 1 mixture (soil: water, and soil texture was determined using a hydrometer. The amount of organic matter was measured using the Valkey black method (Chopin and Alloway, 2007. After preparation of the samples in the laboratory, the samples were analyzed using the ICP-OES method to assess concentration of heavy metals. Measurement of heavy metals concentration was carried out at the Zar azma laboratory in Tehran. To ensure the accuracy of the analysis of soil samples, replicate samples were also sent to the laboratory. In order to assess the heavy metal pollution in the soil samples, different indices including contamination factor (CF, contamination degree (Cd, anthropogenic enrichment percent (An%, and saturation degree of metals (SDM were calculated. Discussion In addition, the mean concentrations of heavy metals in soil samples were compared to the concentration of these metals in Control Sample and unpolluted soil standard. Measurement of soil pH showed that the soil has a tendency to alkalinity. Also, soil texture is sandy loam (Moyes, 2011. The results showed that

Automated Steel Cleanliness Analysis Tool (ASCAT)

Energy Technology Data Exchange (ETDEWEB)

Gary Casuccio (RJ Lee Group); Michael Potter (RJ Lee Group); Fred Schwerer (RJ Lee Group); Dr. Richard J. Fruehan (Carnegie Mellon University); Dr. Scott Story (US Steel)

2005-12-30

The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel

Automated Steel Cleanliness Analysis Tool (ASCAT)

International Nuclear Information System (INIS)

Gary Casuccio; Michael Potter; Fred Schwerer; Richard J. Fruehan; Dr. Scott Story

2005-01-01

The objective of this study was to develop the Automated Steel Cleanliness Analysis Tool (ASCATTM) to permit steelmakers to evaluate the quality of the steel through the analysis of individual inclusions. By characterizing individual inclusions, determinations can be made as to the cleanliness of the steel. Understanding the complicating effects of inclusions in the steelmaking process and on the resulting properties of steel allows the steel producer to increase throughput, better control the process, reduce remelts, and improve the quality of the product. The ASCAT (Figure 1) is a steel-smart inclusion analysis tool developed around a customized next-generation computer controlled scanning electron microscopy (NG-CCSEM) hardware platform that permits acquisition of inclusion size and composition data at a rate never before possible in SEM-based instruments. With built-in customized ''intelligent'' software, the inclusion data is automatically sorted into clusters representing different inclusion types to define the characteristics of a particular heat (Figure 2). The ASCAT represents an innovative new tool for the collection of statistically meaningful data on inclusions, and provides a means of understanding the complicated effects of inclusions in the steel making process and on the resulting properties of steel. Research conducted by RJLG with AISI (American Iron and Steel Institute) and SMA (Steel Manufactures of America) members indicates that the ASCAT has application in high-grade bar, sheet, plate, tin products, pipes, SBQ, tire cord, welding rod, and specialty steels and alloys where control of inclusions, whether natural or engineered, are crucial to their specification for a given end-use. Example applications include castability of calcium treated steel; interstitial free (IF) degasser grade slag conditioning practice; tundish clogging and erosion minimization; degasser circulation and optimization; quality assessment/steel cleanliness; slab, billet

Corrosion of carbon steel and low-alloy steel in diluted seawater containing hydrazine under gamma-rays irradiation

International Nuclear Information System (INIS)

Nakano, Junichi; Yamamoto, Masahiro; Tsukada, Takashi

2014-01-01

Seawater was injected into reactor cores of Units 1, 2, and 3 in the Fukushima Daiichi nuclear power station as an urgent coolant. It is considered that the injected seawater causes corrosion of steels of the reactor pressure vessel and primary containment vessel. To investigate the effects of gamma-rays irradiation on weight loss in carbon steel and low-alloy steel, corrosion tests were performed in diluted seawater at 50°C under gamma-rays irradiation. Specimens were irradiated with dose rates of 4.4 kGy/h and 0.2 kGy/h. To evaluate the effects of hydrazine (N 2 H 4 ) on the reduction of oxygen and hydrogen peroxide, N 2 H 4 was added to the diluted seawater. In the diluted seawater without N 2 H 4 , weight loss in the steels irradiated with 0.2 kGy/h was similar to that in the unirradiated steels, and weight loss in the steels irradiated with 4.4 kGy/h increased to approximate 1.7 times of those in the unirradiated steels. Weight loss in the steels irradiated in the diluted seawater containing N 2 H 4 was similar to that in the diluted seawater without N 2 H 4 . When N 2 was introduced into the gas phase in the flasks during gamma-rays irradiation, weight loss in the steels decreased. (author)

17 CFR 250.12 - Exemption of certain public utility companies from the definition of subsidiary companies of...

Science.gov (United States)

2010-04-01

... utility companies from the definition of subsidiary companies of holding companies. 250.12 Section 250.12... REGULATIONS, PUBLIC UTILITY HOLDING COMPANY ACT OF 1935 Registration and General Exemptions § 250.12 Exemption of certain public utility companies from the definition of subsidiary companies of holding companies...

Section 1: Company directory

International Nuclear Information System (INIS)

Anon.

1991-01-01

This is a 1992 directory of those companies doing business in all areas of the independent power producers industry. The listing includes the company name, address, telephone and FAX numbers, and the name of a company contact. The listing is international in scope

Global gas company profiles

International Nuclear Information System (INIS)

1997-01-01

This report provides a detailed assessment of 60 of the top gas companies form around the world, analysing them according to their internal dynamics and in relation to their competitors. It devotes each chapter to an individual company, providing invaluable insight into the organisation's operational background, financial performance and strategic goals. Using the most up-to-date information available, Global Gas Company Profiles allows you to make detailed analysis of each company's performance and future direction. (author)

Study on cementitious properties of steel slag

Directory of Open Access Journals (Sweden)

Zhu G.

2013-01-01

Full Text Available The converter steel slag chemical and mineral components in China’s main steel plants have been analysed in the present paper. The electronic microscope, energy spectrum analysis, X-ray diffraction analysis confirmed the main mineral compositions in the converter slag. Converter slag of different components were grounded to obtain a powder with specific surface area over 400m2/kg, making them to take place some part of the cement in the concrete as the admixture and carry out the standard tests. The results indicate that the converter slag can be used as cementitious materials for construction. Furthermore, physical mechanic and durability tests on the concrete that certain amount of cement be substituted by converter steel slag powder from different steel plants are carried out, the results show that the concrete with partial substitution of steel slag powder has the advantages of higher later period strength, better frost resistance, good wear resistance and lower hydration heat, etc. This study can be used as the technical basis for “Steel Slag Powder Used For Cement And Concrete”, “Steel Slag Portland Cement”, “Low Heat Portland Steel Slag Cement”, “Steel Slag Road Cement” in China, as well as a driving force to the works of steel slag utilization with high-value addition, circular economy, energy conservation and discharge reduction in the iron and steel industry.

Surface design methodology - challenge the steel

Science.gov (United States)

Bergman, M.; Rosen, B.-G.; Eriksson, L.; Anderberg, C.

2014-03-01

The way a product or material is experienced by its user could be different depending on the scenario. It is also well known that different materials and surfaces are used for different purposes. When optimizing materials and surface roughness for a certain something with the intention to improve a product, it is important to obtain not only the physical requirements, but also the user experience and expectations. Laws and requirements of the materials and the surface function, but also the conservative way of thinking about materials and colours characterize the design of medical equipment. The purpose of this paper is to link the technical- and customer requirements of current materials and surface textures in medical environments. By focusing on parts of the theory of Kansei Engineering, improvements of the companys' products are possible. The idea is to find correlations between desired experience or "feeling" for a product, -customer requirements, functional requirements, and product geometrical properties -design parameters, to be implemented on new improved products. To be able to find new materials with the same (or better) technical requirements but a higher level of user stimulation, the current material (stainless steel) and its surface (brushed textures) was used as a reference. The usage of focus groups of experts at the manufacturer lead to a selection of twelve possible new materials for investigation in the project. In collaboration with the topical company for this project, three new materials that fulfil the requirements -easy to clean and anti-bacterial came to be in focus for further investigation in regard to a new design of a washer-disinfector for medical equipment using the Kansei based Clean ability approach CAA.

Modern steels for light automobiles (review)

Science.gov (United States)

Tikhonov, A. K.

1994-10-01

The article considers the directions of work at VAZ together with metallurgists of the CIS for creating highly efficient economically-alloyed and microalloyed steels; highly ductile forged steels with improved corrosion resistance coated with zinc and with good stamping, welding, and painting capacity. Steels are created for petrol tanks with aluminum-zinc coatings instead of lead, and new heat and corrosion-resistant steels are developed for automobile exhaust gas systems.

Inclusion control in high-performance steels

International Nuclear Information System (INIS)

Holappa, L.E.K.; Helle, A.S.

1995-01-01

Progress of clean steel production, fundamentals of oxide and sulphide inclusions as well as inclusion morphology in normal and calcium treated steels are described. Effects of cleanliness and inclusion control on steel properties are discussed. In many damaging constructional and engineering applications the nonmetallic inclusions have a quite decisive role in steel performance. An example of combination of good mechanical properties and superior machinability by applying inclusion control is presented. (author)

Are Entrepreneur-Led Companies Better? Evidence from Publicly Traded U.S. Companies: 1998-2010

Directory of Open Access Journals (Sweden)

Joel M. Shulman

2010-12-01

Full Text Available Do U.S. publicly-traded companies led by entrepreneurs perform better than nonentrepreneur-led U.S. public companies? Our data suggests they do. We analyze monthly stock returns of U.S. publicly traded companies over the time period 1998-2010 and find compelling evidence demonstrating that irrespective of market capitalization and time period, companies led by U.S. entrepreneurs provide better stock performance than several stock market indices primarily comprised of non-entrepreneur-led U.S. companies.

Born global companies: A case study about the internationalization behaviours of Portuguese companies

OpenAIRE

Carlos, Diogo Miguel Pais Grou Simões

2015-01-01

Portuguese Born Global Companies have been performing an important role in the Portuguese market, mainly due to their innovative ideas and the positive contribution to exportations. This study focuses on the international strategies of four of these companies, comparing them with four international Non-Born Global Companies, in qualitative analysis. It will be possible to see a preference by the Non-Born Global Companies over proximate cultural countries. By following opportunities instead...

Description of interview data regarding Pittsburgh and confluence toxic chemical accidents

Energy Technology Data Exchange (ETDEWEB)

Rogers, G.O.; Shumpert, B.L.; Sorensen, J.H.

1990-11-01

Evacuation is the protective action most often recommended in response to chemical releases in the United States. The appropriateness of a decision to evacuate depends on whether the affected areas can be cleared of residents before it is contaminated by the chemical release. In determining whether an evacuation can be completed in time, emergency officials must consider both technical and behavioral aspects. The technical components can be readily conceived and quantified. In contrast, the behavioral components are much more abstract and more difficult to estimate. This report summarizes the univariate analysis of responses to surveys conducted in two communities where evacuation was recommended following train derailments involving hazardous chemicals. The surveys were designed to identify the actions taken by residents upon receiving the emergency warning; determine when people received the warning, decided to take action, and implemented the action; and ascertain factors that might explain the nature and timing of their actions. The surveys were conducted in the Bloomfield section of Pittsburgh, Pennsylvania, and in the town of Confluence, Pennsylvania. The study confirms that compliance with an emergency warning to evacuate varies and that potentially dangerous delays can be expected. Significant differences were noted, however, in the rate and speed of compliance in the two communities. The surveys provide information on several factors that may be useful in determining the reasons for differences in the responses from the two communities as well as differences among individual respondents. Such factors include the time of day when the accident occurred, where the respondent was at the time, whether the family was together, previous disaster experience, pet ownership, the content of the warning message, and demographic characteristics. 4 refs., 4 figs., 18 tabs.

Steel fiber reinforced concrete

International Nuclear Information System (INIS)

Baloch, S.U.

2005-01-01

Steel-Fiber Reinforced Concrete is constructed by adding short fibers of small cross-sectional size .to the fresh concrete. These fibers reinforce the concrete in all directions, as they are randomly oriented. The improved mechanical properties of concrete include ductility, impact-resistance, compressive, tensile and flexural strength and abrasion-resistance. These uniqlte properties of the fiber- reinforcement can be exploited to great advantage in concrete structural members containing both conventional bar-reinforcement and steel fibers. The improvements in mechanical properties of cementitious materials resulting from steel-fiber reinforcement depend on the type, geometry, volume fraction and material-properties of fibers, the matrix mix proportions and the fiber-matrix interfacial bond characteristics. Effects of steel fibers on the mechanical properties of concrete have been investigated in this paper through a comprehensive testing-programme, by varying the fiber volume fraction and the aspect-ratio (Lid) of fibers. Significant improvements are observed in compressive, tensile, flexural strength and impact-resistance of concrete, accompanied by marked improvement in ductility. optimum fiber-volume fraction and aspect-ratio of steel fibers is identified. Test results are analyzed in details and relevant conclusions drawn. The research is finally concluded with future research needs. (author)

What would be the effects of a carbon tax in Japan: an historic analysis of subsidies and fuel pricing on the iron & steel, chemical, and machinery industries

Directory of Open Access Journals (Sweden)

Takako Wakiyama

2016-06-01

Full Text Available This study examines how a carbon tax could affect industrial-related carbon dioxide (CO2 emissions in Japan. Rather than forecasting the effects of a tax, the paper employs a time-series autoregressive moving average (ARMA model to determine how past subsidies and fuel price changes affected investments in energy and carbon intensity in Japan’s iron & steel, chemical, and machinery industries from 1993 to 2004. The results suggest the impacts varied greatly across industries. In the iron & steel industry, subsidies and price changes produced negligible effects on investments in energy and carbon intensity. This may be because existing iron & steel technologies have long lifetimes and substantial replacement costs. It may also be because the few large companies dominating the industry were relatively immune to subsidy provisions and pricing changes. In the chemical industry, subsidies and fuel prices gave rise to investments that improved carbon and energy intensity. This may be because the industry has relatively higher operation costs that could be cut easily given financial incentives. In the machinery industry, two of three fuel price changes (oil and gas, but not subsidy provisions, yielded improvements in carbon and energy intensity. This may reflect the heterogeneity of companies and products comprising the industry. Overall, the study underscores that policymakers need to tailor the rates and revenue recycling provisions of a carbon tax to an industry’s unique features to stimulate CO2 reductions.

Development of nuclear grade stainless steels at KCSSL

International Nuclear Information System (INIS)

Balachandran, G.; Dhere, M.; Mahadik, A.; Hinge, N.M.; Balasubramanian, V.

2011-01-01

Kalyani Carpenter Special Steels Ltd is an alloy steel plant, where a variety of alloy steel grades are produced for automotive, defence, nuclear and aerospace applications. The plant has developed expertise in processing of several alloy steel grades of superior quality that meets stringent specifications. Primary steel is processed through a combination of electric arc furnace, ladle furnace and vacuum degassing where stringent control over dephosphorisation, desulphurization, deoxidation is effected to get a refined high quality steel. The molten steel is cast through continuous casting of slabs or ingot casting. In grades specific to nuclear application, the primary cast products are further subjected to electroslag remelting to achieve further freedom from inclusions and to achieve a favourable solidification grain structure, which ultimately improve the hot workability of the alloy steel. Appropriate choice of slag and operating parameters are needed for realising the required ingot quality. The present study would examine the processing and quality aspects of some important grades of steels used in nuclear industry namely ferritic 9Cr-1Mo steel, martensitic stainless steels 403, 410, precipitation hardenable 17-4 PH stainless steel and austenitic 321, 316LN stainless steel, which were made and supplied for applications to Indian nuclear industry. The expertise developed in processing the steels in terms of melting, heat treatment and their relationship to structural features and mechanical properties would be highlighted. (author)

Fatigue behaviour of friction welded medium carbon steel and austenitic stainless steel dissimilar joints

International Nuclear Information System (INIS)

Paventhan, R.; Lakshminarayanan, P.R.; Balasubramanian, V.

2011-01-01

Research highlights: → Fusion welding of dissimilar metals is a problem due to difference in properties. → Solid state welding process such as friction welding is a solution for the above problem. → Fatigue life of friction welded carbon steel and stainless steel joints are evaluated. → Effect of notch on the fatigue life of friction welded dissimilar joints is reported. → Formation of intermetallic is responsible for reduction in fatigue life of dissimilar joints. -- Abstract: This paper reports the fatigue behaviour of friction welded medium carbon steel-austenitic stainless steel (MCS-ASS) dissimilar joints. Commercial grade medium carbon steel rods of 12 mm diameter and AISI 304 grade austenitic stainless steel rods of 12 mm diameter were used to fabricate the joints. A constant speed, continuous drive friction welding machine was used to fabricate the joints. Fatigue life of the joints was evaluated conducting the experiments using rotary bending fatigue testing machine (R = -1). Applied stress vs. number of cycles to failure (S-N) curve was plotted for unnotched and notched specimens. Basquin constants, fatigue strength, fatigue notch factor and notch sensitivity factor were evaluated for the dissimilar joints. Fatigue strength of the joints is correlated with microstructure, microhardness and tensile properties of the joints.

Life after Steel

Science.gov (United States)

Mangan, Katherine

2013-01-01

Bobby Curran grew up in a working-class neighborhood in Baltimore, finished high school, and followed his grandfather's steel-toed bootprints straight to Sparrows Point, a 3,000-acre sprawl of industry on the Chesapeake Bay. College was not part of the plan. A gritty but well-paying job at the RG Steel plant was Mr. Curran's ticket to a secure…

Development of new high-performance stainless steels

International Nuclear Information System (INIS)

Park, Yong Soo

2002-01-01

This paper focused on high-performance stainless steels and their development status. Effect of nitrogen addition on super-stainless steel was discussed. Research activities at Yonsei University, on austenitic and martensitic high-performance stainless, steels, and the next-generation duplex stainless steels were introduced

Ferritic/martensitic steels: Promises and problems

International Nuclear Information System (INIS)

Klueh, R.L.; Ehrlich, K.; Abe, F.

1992-01-01

Ferritic/martensitic steels are candidate structural materials for fusion reactors because of their higher swelling resistance, higher thermal conductivity, lower thermal expansion, and better liquid-metal compatibility than austenitic steels. Irradiation effects will ultimately determine the applicability of these steels, and the effects of irradiation on microstructure and swelling, and on the tensile, fatigue, and impact properties of the ferritic/martensitic steels are discussed. Most irradiation studies have been carried out in fast reactors, where little transmutation helium forms. Helium has been shown to enhance swelling and affect tensile and fracture behavior, making helium a critical issue, since high helium concentrations will be generated in conjunction with displacement damage in a fusion reactor. These issues are reviewed to evaluate the status of ferritic/martensitic steels and to assess the research required to insure that such steels are viable candidates for fusion applications

Evaluation criteria of structural steel reliability

International Nuclear Information System (INIS)

Zav'yalov, A.S.

1980-01-01

Different low-carbon and medium-carbon structural steels are investigated. It is stated that steel reliability evaluation criteria depend on the fracture mode, steel suffering from the brittle fracture under the influence of the stresses (despite their great variety) arising in articles during the production and operation. Fibrous steel fracture at the given temperature and article thickness says about its high ductility and toughness and brittle fractures are impossible. Brittle fractures take place in case of a crystalline and mixed fracture with a predominant crystalline component. Evaluation methods of article and sample steel structural strength differing greatly from real articles in a thickness (diameter) or used at temperatures higher than possible operation temperatures cannot be reliability evaluation criteria because at a great thickness (diameter) and lower operation temperatures steel fracture and its strain mode can change resulting in a sharp reliability degradation

It was the demonstration of industrial steel production capacity ferritic-martensitic Spanish ASTURFER scale demand ITER; Hacia la demostracion de capacidad de produccion industrial del acero ferritico-martensitico espanol ASTURFER a escala de demanda ITER

Energy Technology Data Exchange (ETDEWEB)

Coto, R.; Serrano, M.; Moran, A.; Rodriguez, D.; Artimez, J. A.; Belzunce, J.; Sedano, L.

2013-07-01

Reduced Activation Ferritic-Martensitic (RAFM) structural steels are considered as candidate materials with notable possibilities to be incorporated to fusion reactor ITER, nowadays under construction, and future fusion reactor DEMO, involving a notable forecasting of supply materials, with a considerable limitation due to the few number of furnishes currently on the market. The manufacture at an industrial scale of the ASTURFER steel, developed at laboratory scale by ITMA Materials Technology and the Structural Materials Division of the Technology Division of CIEMAT would be a significant business opportunity for steelwork companies.

Development of PWR pressure vessel steels

International Nuclear Information System (INIS)

Druce, S.; Edwards, B.

1982-01-01

Requirements to be met by vessel steels for pressurized water reactors are analyzed. Chemicat composition of low-alloyed steels, mechanical properties of sheets and forgings made of these steels and changes in the composition and properties over the wall thickness of the reactor vessel are presented. Problems of the vessel manufacturing including welding and heat treatment processes of sheets and forgings are considered. Special attention is paid to steel embrittlement during vessel fabrication and operation (radiation embrittlement, thermal embrittlement). The role of non-metal inclusions and their effect on anisotropy of fracture toughness is discussed. Possible developments of vessel steels and procedures for producing reactor vessels are reviewed

Development of PWR pressure vessel steels

Energy Technology Data Exchange (ETDEWEB)

Druce, S.; Edwards, B.

1982-01-01

Requirements to be met by vessel steels for pressurized water reactors are analyzed. Chemicat composition of low-alloyed steels, mechanical properties of sheets and forgings made of these steels and changes in the composition and properties over the wall thickness of the reactor vessel are presented. Problems of the vessel manufacturing including welding and heat treatment processes of sheets and forgings are considered. Special attention is paid to steel embrittlement during vessel fabrication and operation (radiation embrittlement, thermal embrittlement). The role of non-metal inclusions and their effect on anisotropy of fracture toughness is discussed. Possible developments of vessel steels and procedures for producing reactor vessels are reviewed.

75 FR 36153 - Surety Companies Acceptable on Federal Bonds-Terminations: Victore Insurance Company

Science.gov (United States)

2010-06-24

... from this company, and bonds that are continuous in nature should not be renewed. The Circular may be... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Terminations: Victore Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department of the...

Company environmental communication

International Nuclear Information System (INIS)

Andriola, L.; Luciani, R.; Borghini, S.

2001-01-01

Environmental communication is becoming a sine qua non for companies which are more and more pressed by the need to reinforce communication with interested parties: environmental groups, local communities, local and national authorities, employees, share-holders, banks, insurance companies, customers and consumers. Reliable environmental information, just like economical and property data, is now required during both company take-over and financing, and in some cases it can affect insurance premiums. In fact, environmental guarantees are more and more often required because breaching environmental regulations can entail legal sanctions going as far as suspension of business. There now also Green investment funds that engage their resources only against specific environmental guarantees on the part of the companies that, before being selected for the investment, are submitted to rather accurate questionnaires by the investment manager [it

Influence of steel-making process and heat-treatment temperature on the fatigue and fracture properties of pressure vessel steels

International Nuclear Information System (INIS)

Koh, S. K.; Na, E. G.; Baek, T. H.; Won, S. Y.; Park, S. J.; Lee, S. W.

2001-01-01

In this paper, high strength pressure vessel steels having the same chemical compositions were manufactured by the two different steel-making processes, such as Vacuum Degassing(VD) and Electro-Slag Remelting(ESR) methods. After the steel-making process, they were normalized at 955 deg. C, quenched at 843 .deg. C, and finally tempered at 550 .deg. C or 450 deg. C, resulting in tempered martensitic microstructures with different yielding strengths depending on the tempering conditions. Low-Cycle Fatigue(LCF) tests, Fatigue Crack Growth Rate(FCGR) tests, and fracture toughness tests were performed to investigate the fatigue and fracture behaviors of the pressure vessel steels. In contrast to very similar monotonic, LCF, and FCGR behaviors between VD and ESR steels, a quite difference was noticed in the fracture toughness. Fracture toughness of ESR steel was higher than that of VD steel, being attributed to the removal of impurities in steel-making process

Irradiation behavior of German PWR RPV steels under operating conditions

Energy Technology Data Exchange (ETDEWEB)

May, J.; Hein, H. [AREVA NP Gmbh (Germany); Ganswind, J. [VGB PowerTech e.V. (Germany); Widera, M. [RWE Power AG (Germany)

2011-07-01

In 2007, the last standard surveillance capsule of the original RPV (Reactor Pressure Vessel) surveillance programs of the 11 currently operating German PWR has been evaluated. With it the standard irradiation surveillance programs of these plants was completed. In the present paper, irradiation data of these surveillance programs will be presented and a final assessment of the irradiation behavior of the German PWR RPV steels with respect to current standards KTA 3203 and Reg. Guide 1.99 Rev. 2 will be given. Data from two units which are currently under decommissioning will also be included, so that data from all 13 German PWR manufactured by the former Siemens/KWU company (now AREVA NP GmbH) are shown. It will be shown that all surveillance data within the approved area of chemical composition verify the limit curve RT(limit) of the KTA 3203, which is the relevant safety standard for these plants. An analysis of the data shows, that the prediction formulas of Reg. Guide 1.99 Rev. 2 Pos. 1 or from the TTS model tend to overestimate the irradiation behavior of the German PWR RPV steels. Possible reasons for this behavior are discussed. Additionally, the data will be compared to data from the research project CARISMA to demonstrate that these data are representative for the irradiation behavior of the German PWR RPV steels. Since the data of these research projects cover a larger neutron fluence range than the original surveillance data, they offer a future outlook into the irradiation behavior of the German PWR RPV steels under long term conditions. In general, as a consequence of the relatively large and beneficial water gap between core and RPV, especially in all Siemens/KWU 4-loop PWR, the EOL neutron fluence and therefore the irradiation induced changes in mechanical properties of the German PWR RPV materials are rather low. Moreover the irradiation data indicate that the optimized RPV materials specifications that have been applied in particular for the

International company restructuring and the effects on high-skilled employees in lead companies

DEFF Research Database (Denmark)

Hansen, Nana Wesley

2016-01-01

insulated from international restructuring processes. However, effects on wage and working conditions vary dependent on the motivation for restructuring, and as companies learn to take advantage of pools of skilled employees abroad. Continued international restructuring appear to challenge the insulation......International company restructuring involving knowledge intensive jobs causes increasing concern about the effect on the globalization of high-skilled employees. Drawing on case studies in four Danish-based companies, this article argues that high-skilled employees in lead companies are rarely...... of high-skilled workers over time. Further, the article shows that knowledge intensive Companies increasingly apply relational global value chain governance with multidirectional consequences for wage and working conditions among the high-skilled employees....

Corrosion behavior of 2205 duplex stainless steel.

Science.gov (United States)

Platt, J A; Guzman, A; Zuccari, A; Thornburg, D W; Rhodes, B F; Oshida, Y; Moore, B K

1997-07-01

The corrosion of 2205 duplex stainless steel was compared with that of AISI type 316L stainless steel. The 2205 stainless steel is a potential orthodontic bracket material with low nickel content (4 to 6 wt%), whereas the 316L stainless steel (nickel content: 10 to 14 wt%) is a currently used bracket material. Both stainless steels were subjected to electrochemical and immersion (crevice) corrosion tests in 37 degrees C, 0.9 wt% sodium chloride solution. Electrochemical testing indicates that 2205 has a longer passivation range than 316L. The corrosion rate of 2205 was 0.416 MPY (milli-inch per year), whereas 316L exhibited 0.647 MPY. When 2205 was coupled to 316L with equal surface area ratio, the corrosion rate of 2205 reduced to 0.260 MPY, indicating that 316L stainless steel behaved like a sacrificial anode. When 316L is coupled with NiTi, TMA, or stainless steel arch wire and was subjected to the immersion corrosion test, it was found that 316L suffered from crevice corrosion. On the other hand, 2205 stainless steel did not show any localized crevice corrosion, although the surface of 2205 was covered with corrosion products, formed when coupled to NiTi and stainless steel wires. This study indicates that considering corrosion resistance, 2205 duplex stainless steel is an improved alternative to 316L for orthodontic bracket fabrication when used in conjunction with titanium, its alloys, or stainless steel arch wires.

76 FR 30397 - Faribault Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of...

Science.gov (United States)

2011-05-25

... Woolen Mill Company, Faribault, MN; Faribo Woolens, Inc., a Related Company of Faribault Woolen Mill... December 9, 2009, applicable to workers of Faribault Woolen Mill Company, Faribault, Minnesota. The notice... Mill Company, a retail outlet store for the subject firm, Faribault Woolen Mill Company. Accordingly...

ABOUT RATIONING MAXIMUM ALLOWABLE DEFECT DEPTH ON THE SURFACE OF STEEL BILLETS IN PRODUCTION OF HOT-ROLLED STEEL

Directory of Open Access Journals (Sweden)

PARUSOV E. V.

2017-01-01

Full Text Available Formulation of the problem. Significant influence on the quality of rolled steel have various defects on its surface, which in its turn inherited from surface defects of billet and possible damage to the surface of rolled steel in the rolling mill line. One of the criteria for assessing the quality indicators of rolled steel is rationing of surface defects [1; 2; 3; 6; 7]. Current status of the issue. Analyzing the different requirements of regulations to the surface quality of the rolled high-carbon steels, we can conclude that the maximum allowable depth of defects on the surface of billet should be in the range of 2.0...5.0 mm (depending on the section of the billet, method of its production and further the destination Purpose. Develop a methodology for calculating the maximum allowable depth of defects on the steel billet surface depending on the requirements placed on the surface quality of hot-rolled steel. Results. A simplified method of calculation, allowing at the rated depth of defects on the surface of the hot-rolled steel to make operatively calculation of the maximum allowable depth of surface defects of steel billets before heating the metal in the heat deformation was developed. The findings shows that the maximum allowable depth of surface defects is reduced with increasing diameter rolled steel, reducing the initial section steel billet and degrees of oxidation of the metal in the heating furnace.

Formerly utilized MED/AEC sites remedial action program: radiological survey of the former Simonds Saw and Steel Co., Lockport, New York. Final report

International Nuclear Information System (INIS)

1979-11-01

Results of a radiological survey of the former Simonds Saw and Steel Company (current name of this facility is Guterl Special Steel Corporation), Lockport, New York, are presented in this report. During the period 1948 to 1956, this company handled large quantities of uranium metal and smaller quantities of thorium metal in rolling mill operations. The survey included measurement of residual alpha and beta-gamma radiation levels in the rolling mill building and forging shop; external gamma radiation in the same area; uranium, radium, and thorium in soil samples taken from beneath removable floor plates in the rolling mill area and from other parts of the site; radon and radon daughter concentrations in the rolling mill building; and contamination in drainage paths leading from the buildings and grounds. Elevated concentrations of uranium were found in soil samples taken from beneath the floor plates within 40 ft of the 16-inch rolling mill. Beta-gamma radiation levels were greater than 1 mrad/hr at the locations having the highest concentrations of uranium. External gamma radiation levels were above the background level in a few small isolated areas in the rolling mill building. The 16-inch rolling mill showed elevated alpha and beta contamination levels in several areas

Company Vision and Organizational Learning

Directory of Open Access Journals (Sweden)

Vojko Toman

2015-11-01

Full Text Available The effectiveness of a company is largely dependent on the company itself; it depends above all on its corporate governance, management, and implementation, as well as on decision-making processes and coordination. Many authors believe that organizational learning and knowledge are the most relevant aspects of company effectiveness. If a company wants to be effective it needs to create and realize its vision; to do this, it needs creativity, imagination, and knowledge, which can be obtained or enhanced through learning. This paper defines vision, learning, creativity and management and, above all, their relationships. The author argues that company vision influences the learning and knowledge of employees in the company through the vision’s content, through the vision-creating process, and through the vision enforcement process. Conversely, the influence of learning on company vision is explained. The paper is aimed at the use in the practice of companies and helps them to increase their effectiveness.

The reactor vessel steels

International Nuclear Information System (INIS)

Bilous, W.; Hajewska, E.; Szteke, W.; Przyborska, M.; Wasiak, J.; Wieczorkowski, M.

2005-01-01

In the paper the fundamental steels using in the construction of pressure vessel water reactor are discussed. The properties of these steels as well as the influence of neutron irradiation on its degradation in the time of exploitation are also done. (authors)

Heat Treatment and Properties of Iron and Steel

National Research Council Canada - National Science Library

Digges, Thomas

1966-01-01

.... Chemical compositions, heat treatments, and some properties and uses are presented for structural steels, tool steels, stainless and heat-resisting steels, precipitation-hardenable stainless steels...

Investigation of the effect of occupational noise exposure on blood pressure and heart rate of steel industry workers.

Science.gov (United States)

Zamanian, Zahra; Rostami, Reza; Hasanzadeh, Jafar; Hashemi, Hassan

2013-01-01

This study aimed to investigate the effect of noise exposure on blood pressure and heart rate of steel industry workers. In the present cross-sectional study, 50 workers were selected from a steel company in Fars province, Iran, and exposed to 85, 95, and 105 dB noise levels for 5 minutes. The participants' blood pressure and heart rate were measured using Beurer BC16 pulse meter both before and after the exposure. The study results showed no significant difference in blood pressure and heart rate before and after the exposure. However, the workers' systolic blood pressure had increased compared to before the exposure; of course, the difference was not statistically significant (P > 0.05). Besides, although the subjects' heart rate had reduced in comparison to before the exposure, the difference was not statistically significant (P > 0.05). No significant change was observed in blood pressure and heart rate after acute exposure to 85, 95, and 105 dB noise levels.

Oil Companies Climb Global List

Institute of Scientific and Technical Information of China (English)

JESSY ZHANG

2006-01-01

@@ Backed by the huge market size,China's energy companies have been ranked in the group of the world's largest industry players. On September 6th,eight companies from the Chinese mainland and six companies from Hong Kong SAR were included in this year's Platts Top 250 Energy Companies List.

Performance Steel Castings

Science.gov (United States)

2012-09-30

system components to be built. Figure la shows the machine design . PSC-2012 Page 94 Glue Application Sheet Transfer Feed Elevator Figure la...Department of Defense such as cleats, ejection chutes , control arms, muzzle brakes, mortar components, clevises, tow bar clamps, ammo conveyor elements...Foundry and the members of Steel Founders’ Society of America. Abstract Weapon system designers and builders need advanced steel casting technology

High temperature oxidation behavior of ODS steels

Science.gov (United States)

Kaito, T.; Narita, T.; Ukai, S.; Matsuda, Y.

2004-08-01

Oxide dispersion strengthened (ODS) steels are being developing for application as advanced fast reactor cladding and fusion blanket materials, in order to allow increased operation temperature. Oxidation testing of ODS steel was conducted under a controlled dry air atmosphere to evaluate the high temperature oxidation behavior. This showed that 9Cr-ODS martensitic steels and 12Cr-ODS ferritic steels have superior high temperature oxidation resistance compared to 11 mass% Cr PNC-FMS and 17 mass% Cr ferritic stainless steel. This high temperature resistance is attributed to earlier formation of the protective α-Cr 2O 3 on the outer surface of ODS steels.

Process Improvement: An Application in Special Steel Production Sector

Directory of Open Access Journals (Sweden)

Tansu TÜRKAN

2017-07-01

Full Text Available Customer requests are increasingly varied with the changing of the living conditions and developing technology. In this point, customers want to be met the demands which are good quality and suitable price quickly. The trend in today’s global competitive environment is to provide high quality, reasonably priced products and respond in the required time to customer demands. In this point, organizations should review their processes continuously and improve them. In this study begin with the general information about concept of process, process management and process improvement techniques. This paper continuous with an application in a steel production company which supplies product to the customers in the automotive industry that working with just in time philosophy. In this study different techniques for process improvement (Kaizen, Cause and Effect Diagram, Poka-Yoke, 8D, Failure Modes and Effects Analysis were used in combination.

Thermal aging evaluation of cast austenitic stainless steel pipe

International Nuclear Information System (INIS)

Song, T. H.; Jung, I. S.

2002-01-01

24 years have been passed since Kori Unit 1 began its commercial operation, and 19 years have been passed since Kori Unit 2 began its commercial operation. As the end point of design life become closer, plant life extension and periodic safety assessment is paid more and more attention to by utility company. In this paper, the methodologies and results of cast austenitic stainless steel pipe thermal aging evaluations of both units have been presented in association with aging time of 10, 20, and 30 years and operating temperature, respectively. Life extension cases respectively. As a result of this, at the operating temperature of 280 .deg. C, thermal aging was not a problem as long as Charpy V-notch room temperature minimum impact energy is concerned. However, more than 300 .deg. C and 30 years of operating condition, we should perform detailed fracture mechanics analysis with CMTR of NPP pipe

78 FR 15053 - Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington...

Science.gov (United States)

2013-03-08

...,372B] Simpson Lumber Company, LLC, Shelton, Washington; Simpson Lumber Company, LLC, Tacoma, Washington; Simpson Lumber Company, LLC, Longview, Washington; Notice of Revised Determination on Reconsideration On... Reconsideration for the workers and former workers of Simpson Lumber Company, LLC, Shelton, Washington (TA-W-81...

Fragmentation of armor piercing steel projectiles upon oblique perforation of steel plates

Directory of Open Access Journals (Sweden)

Aizik F.

2012-08-01

Full Text Available In this study, a constitutive strength and failure model for a steel core of a14.5 mm API projectile was developed. Dynamic response of a projectile steel core was described by the Johnson-Cook constitutive model combined with principal tensile stress spall model. In order to obtain the parameters required for numerical description of projectile core material behavior, a series of planar impact experiments was done. The parameters of the Johnson-Cook constitutive model were extracted by matching simulated and experimental velocity profiles of planar impact. A series of oblique ballistic experiments with x-ray monitoring was carried out to study the effect of obliquity angle and armor steel plate thickness on shattering behavior of the 14.5 mm API projectile. According to analysis of x-ray images the fragmentation level increases with both steel plate thickness and angle of inclination. The numerical modeling of the ballistic experiments was done using commercial finite element code, LS-DYNA. Dynamic response of high hardness (HH armor steel was described using a modified Johnson-Cook strength and failure model. A series of simulations with various values of maximal principal tensile stress was run in order to capture the overall fracture behavior of the projectile’s core. Reasonable agreement between simulated and x-ray failure pattern of projectile core has been observed.

On high temperature strength of carbon steels

International Nuclear Information System (INIS)

Ichinose, Hiroyuki; Tamura, Manabu; Kanero, Takahiro; Ihara, Yoshihito

1977-01-01

In the steels for high temperature use, the oxidation resistance is regarded as important, but carbon steels show enough oxidation resistance to be used continuously at the temperature up to 500 deg. C if the strength is left out of consideration, and up to 450 deg. C even when the strength is taken into account. Moreover, the production is easy, the workability and weldability are good, and the price is cheap in carbon steels as compared with alloy steels. In the boilers for large thermal power stations, 0.15-0.30% C steels are used for reheater tubes, main feed water tubes, steam headers, wall water tubes, economizer tubes, bypass pipings and others, and they account for 70% of all steel materials used for the boilers of 350 MW class and 30% in 1000 MW class. The JIS standard for the carbon steels for high temperature use and the related standards in foreign countries are shown. The high temperature strength of carbon steels changes according to the trace elements, melting and heat treatment as well as the main compositions of C, Si and Mn. Al and N affect the high temperature strength largely. The characteristics of carbon steels after the heating for hours, the factors controlling the microstructure and high temperature strength, and the measures to improve the high temperature strength of carbon steels are explained. (Kako, I.)

East/west steels for reactor pressure vessels

International Nuclear Information System (INIS)

Davies, M.; Kryukov, A.; Nikolaev, Y.; English, C.

1997-01-01

The report consist of three parts dealing with comparison of the irradiation behaviour of 'Eastern' and 'Western' steels, mechanisms of irradiation embrittlement and the role of compositional variations on the irradiation sensitivity of pressure vessels. Nickel, copper and phosphorus are the elements rendering the most essential influence on behaviour of pressure vessel steels under irradiation and subsequent thermal annealing. For WWER-440 reactor pressure vessel (RPV) steels in which nickel content does nor exceed 0.3% the main affecting factors are phosphorous and copper. For WWER-1000 RPV welds in which nickel content generally exceed 1.5% the role of nickel in radiation embrittlement is decisive. In 'Western' type steels main influencing elements are nickel and copper. The secondary role of phosphorus in radiation embrittlement of 'Western' steels is caused by lower relative content compared to 'Eastern' steels. The process of how copper, phosphorus and nickel contents affect the irradiation sensitivity of both types of steel seem to be similar. Some distinctions between the observed radiation effects is apparently caused by differences in the irradiation conditions and ratios of the contents of above mentioned elements in both types of steel. For 'Eastern' RPV steels the dependence of the recovery degree of irradiated steels due to postirradiation thermal annealing id obviously dependent on phosphorus contents and the influence of nickel contents on this process is detectable

Development of ferritic steels for fusion reactor applications

Energy Technology Data Exchange (ETDEWEB)

Klueh, R.L.; Maziasz, P.J.; Corwin, W.R.

1988-08-01

Chromium-molybdenum ferritic (martensitic) steels are leading candidates for the structural components for future fusion reactors. However, irradiation of such steels in a fusion environment will produce long-lived radioactive isotopes that will lead to difficult waste-disposal problems. Such problems could be reduced by replacing the elements in the steels (i.e., Mo, Nb, Ni, N, and Cu) that lead to long-lived radioactive isotopes. We have proposed the development of ferritic steels analogous to conventional Cr-Mo steels, which contain molybdenum and niobium. It is proposed that molybdenum be replaced by tungsten and niobium be replaced by tantalum. Eight experimental steels were produced. Chromium concentrations of 2.25, 5, 9, and 12% were used (all concentrations are in wt %). Steels with these chromium compositions, each containing 2% W and 0.25% V, were produced. To determine the effect of tungsten and vanadium, 2.25 Cr steels were produced with 2% W and no vanadium and with 0.25% V and O and 1% W. A 9Cr steel containing 2% W, 0.25 V, and 0.07% Ta was also studied. For all alloys, carbon was maintained at 0.1%. Tempering studies on the normalized steels indicated that the tempering behavior of the new Cr-W steels was similar to that of the analogous Cr-Mo steels. Microscopy studies indicated that 2% tungsten was required in the 2.25 Cr steels to produce 100% bainite in 15.9-mm-thick plate during normalization. The 5Cr and 9Cr steels were 100% martensite, but the 12 Cr steel contained about 75% martensite with the balance delta-ferrite. 33 refs., 35 figs., 5 tabs.

Development of ferritic steels for fusion reactor applications

International Nuclear Information System (INIS)

Klueh, R.L.; Maziasz, P.J.; Corwin, W.R.

1988-08-01

Chromium-molybdenum ferritic (martensitic) steels are leading candidates for the structural components for future fusion reactors. However, irradiation of such steels in a fusion environment will produce long-lived radioactive isotopes that will lead to difficult waste-disposal problems. Such problems could be reduced by replacing the elements in the steels (i.e., Mo, Nb, Ni, N, and Cu) that lead to long-lived radioactive isotopes. We have proposed the development of ferritic steels analogous to conventional Cr-Mo steels, which contain molybdenum and niobium. It is proposed that molybdenum be replaced by tungsten and niobium be replaced by tantalum. Eight experimental steels were produced. Chromium concentrations of 2.25, 5, 9, and 12% were used (all concentrations are in wt %). Steels with these chromium compositions, each containing 2% W and 0.25% V, were produced. To determine the effect of tungsten and vanadium, 2.25 Cr steels were produced with 2% W and no vanadium and with 0.25% V and O and 1% W. A 9Cr steel containing 2% W, 0.25 V, and 0.07% Ta was also studied. For all alloys, carbon was maintained at 0.1%. Tempering studies on the normalized steels indicated that the tempering behavior of the new Cr-W steels was similar to that of the analogous Cr-Mo steels. Microscopy studies indicated that 2% tungsten was required in the 2.25 Cr steels to produce 100% bainite in 15.9-mm-thick plate during normalization. The 5Cr and 9Cr steels were 100% martensite, but the 12 Cr steel contained about 75% martensite with the balance delta-ferrite. 33 refs., 35 figs., 5 tabs

Hydrogen effects in stainless steel

International Nuclear Information System (INIS)

Caskey, G.R. Jr.

1983-01-01

The effects of hydrogen on stainless steels have been reviewed and are summarized in this paper. Discussion covers hydrogen solution and transport in stainless steels as well as the effects of hydrogen on deformation and fracture under various loading conditions. Damage is caused also by helium that arises from decay of the hydrogen isotope tritium. Austenitic, ferritic, martensite, and precipitation-hardenable stainless steels are included in the discussion. 200 references

Occupational Profiles in the European Steel Industry.

Science.gov (United States)

Franz, Hans-Werner; And Others

The steel industry in Europe has faced great changes, with resulting layoffs and restructuring. Now that the most basic changes seem to be over, it has become evident that the remaining steel industry requires more highly trained workers than was the case previously. Although steel maintenance employees were always highly skilled, steel production…

Cold-formed steel design

CERN Document Server

Yu, Wei-Wen

2010-01-01

The definitive text in the field, thoroughly updated and expanded Hailed by professionals around the world as the definitive text on the subject, Cold-Formed Steel Design is an indispensable resource for all who design for and work with cold-formed steel. No other book provides such exhaustive coverage of both the theory and practice of cold-formed steel construction. Updated and expanded to reflect all the important developments that have occurred in the field over the past decade, this Fourth Edition of the classic text provides you with more of the detailed, up-to-the-minute techni

Performance of Retrofitted Self-Compacting Concrete-Filled Steel Tube Beams Using External Steel Plates

Directory of Open Access Journals (Sweden)

Ahmed A. M. AL-Shaar

2018-01-01

Full Text Available Self-compacting concrete-filled steel tube (SCCFST beams, similar to other structural members, necessitate retrofitting for many causes. However, research on SCCFST beams externally retrofitted by bolted steel plates has seldom been explored in the literature. This paper aims at experimentally investigating the retrofitting performance of square self-compacting concrete-filled steel tube (SCCFST beams using bolted steel plates with three different retrofitting schemes including varied configurations and two different steel plate lengths under flexure. A total of 18 specimens which consist of 12 retrofitted SCCFST beams, three unretrofitted (control SCCFST beams, and three hollow steel tubes were used. The flexural behaviour of the retrofitted SCCFST beams was examined regarding flexural strength, failure modes, and moment versus deflection curves, energy absorption, and ductility. Experimental results revealed that the implemented retrofitting schemes efficiently improve the moment carrying capacity and stiffness of the retrofitted SCCFST beams compared to the control beams. The increment in flexural strength ranged from 1% to 46%. Furthermore, the adopted retrofitting schemes were able to restore the energy absorption and ductility of the damaged beams in the range of 35% to 75% of the original beam ductility. Furthermore, a theoretical model was suggested to predict the moment capacity of the retrofitted SCCFST beams. The theoretical model results were in good agreement with the test results.

ESF GROUND SUPPORT - STRUCTURAL STEEL ANALYSIS

Energy Technology Data Exchange (ETDEWEB)

T. Misiak

1996-06-26

The purpose and objective of this analysis are to expand the level of detail and confirm member sizes for steel sets included in the Ground Support Design Analysis, Reference 5.20. This analysis also provides bounding values and details and defines critical design attributes for alternative configurations of the steel set. One possible configuration for the steel set is presented. This analysis covers the steel set design for the Exploratory Studies Facility (ESF) entire Main Loop 25-foot diameter tunnel.

Study on Municipal Energy Companies

International Nuclear Information System (INIS)

2009-07-01

This is a summarizing overview of the local, renewable energy initiatives that are grouped under the heading of 'municipal energy company'. A municipal energy company (or sustainable energy company) is a local energy company that initiates, coordinates and/or manages sustainable energy projects with the primary objective of realizing the climate objectives. [nl

Characterization of friction stir welded joint of low nickel austenitic stainless steel and modified ferritic stainless steel

Science.gov (United States)

Mondal, Mounarik; Das, Hrishikesh; Ahn, Eun Yeong; Hong, Sung Tae; Kim, Moon-Jo; Han, Heung Nam; Pal, Tapan Kumar

2017-09-01

Friction stir welding (FSW) of dissimilar stainless steels, low nickel austenitic stainless steel and 409M ferritic stainless steel, is experimentally investigated. Process responses during FSW and the microstructures of the resultant dissimilar joints are evaluated. Material flow in the stir zone is investigated in detail by elemental mapping. Elemental mapping of the dissimilar joints clearly indicates that the material flow pattern during FSW depends on the process parameter combination. Dynamic recrystallization and recovery are also observed in the dissimilar joints. Among the two different stainless steels selected in the present study, the ferritic stainless steels shows more severe dynamic recrystallization, resulting in a very fine microstructure, probably due to the higher stacking fault energy.

Utilization of structural steel in buildings.

Science.gov (United States)

Moynihan, Muiris C; Allwood, Julian M

2014-08-08

Over one-quarter of steel produced annually is used in the construction of buildings. Making this steel causes carbon dioxide emissions, which climate change experts recommend be reduced by half in the next 37 years. One option to achieve this is to design and build more efficiently, still delivering the same service from buildings but using less steel to do so. To estimate how much steel could be saved from this option, 23 steel-framed building designs are studied, sourced from leading UK engineering firms. The utilization of each beam is found and buildings are analysed to find patterns. The results for over 10 000 beams show that average utilization is below 50% of their capacity. The primary reason for this low value is 'rationalization'-providing extra material to reduce labour costs. By designing for minimum material rather than minimum cost, steel use in buildings could be drastically reduced, leading to an equivalent reduction in 'embodied' carbon emissions.

Corrosion fatigue of pressure vessel steels in PWR environments--influence of steel sulfur content

International Nuclear Information System (INIS)

Scott, P.M.; Druce, S.G.; Truswell, A.E.

1984-01-01

Large effects of simulated light water reactor environments at 288 C on fatigue crack growth in low alloy pressure vessel steels are observed only when specific mechanical, metallurgical, and electrochemical conditions are satisfied simultaneously. In this paper, the relative importance of three key variables--steel impurity content, water chemistry, and flow rate--and their interaction with loading rate or strain rate are examined. In particular, the results of a systematic examination of the influence of a steel's sulfur content are described

Corrosion fatigue of pressure vessel steels in PWR environments--influence of steel sulfur content

Energy Technology Data Exchange (ETDEWEB)

Scott, P.M.; Druce, S.G.; Truswell, A.E.

1984-07-01

Large effects of simulated light water reactor environments at 288 C on fatigue crack growth in low alloy pressure vessel steels are observed only when specific mechanical, metallurgical, and electrochemical conditions are satisfied simultaneously. In this paper, the relative importance of three key variables--steel impurity content, water chemistry, and flow rate--and their interaction with loading rate or strain rate are examined. In particular, the results of a systematic examination of the influence of a steel's sulfur content are described.

Factors Influencing Company Relations with Market Stakeholders, in the Face of Crises in Company Development

Directory of Open Access Journals (Sweden)

Olszewska Barbara

2014-06-01

Full Text Available Crises in company development are a particular subset of management crises. They emerge on various stages of company development, as a result of gradual depletion of effective management solutions. Crisis situations in companies have varied impact on company stakeholders. The paper presents results of empirical studies of factors influencing company relations with market stakeholders and those that facilitate the process of restoring and maintaining any relations that suffered in the course of crises in company development. The authors’ intention was to identify such factors and evaluate their importance, in relation to various stages of company development and the associated types of crisis situations faced by companies. Empirical studies suggest that certain factors may facilitate conflict resolution in matters concerning company relations with market stakeholders, and that the impact of these factors varies depending on the phase of organizational development and the type of the associated crisis situation. It must be noted, that one of the most important factors to influence problem resolution is the perceived honesty of the exchange participants. Moreover, research suggests that opinions on the significance of organizational dependence of exchange participants in the resolution of problems in relations with market stakeholders are varied.

Aerosol measurements from plasma torch cuts on stainless steel, carbon steel, and aluminum

International Nuclear Information System (INIS)

Novick, V.J.; Brodrick, C.J.; Crawford, S.; Nasiatka, J.; Pierucci, K.; Reyes, V.; Sambrook, J.; Wrobel, S.; Yeary, J.

1996-01-01

The main purpose of this project is to quantify aerosol particle size and generation rates produced by a plasma torch whencutting stainless steel, carbon steel and aluminum. the plasma torch is a common cutting tool used in the dismantling of nuclear facilities. Eventually, other cutting tools will be characterized and the information will be compiled in a user guide to aid in theplanning of both D ampersand D and other cutting operations. The data will be taken from controlled laboratory experiments on uncontaminated metals and field samples taken during D ampersand D operations at ANL nuclear facilities. The plasma torch data was collected from laboratory cutting tests conducted inside of a closed, filtered chamber. The particle size distributions were determined by isokinetically sampling the exhaust duct using a cascade impactor. Cuts on different thicknesses showed there was no observable dependence of the aerosol quantity produced as a function of material thickness for carbon steel. However, data for both stainless steel and aluminum revealed that the aerosol mass produced for these materials appear to have some dependance on thickness, with thinner materials producing tmore aerosols. The results of the laboratory cutting tests show that most measured particle size distributions are bimodal with one mode at about 0.2 μm and the other at about 10 μm. The average Mass Median Aerodynamic Diameters (MMAD's) for these tests are 0.36 ±0.08 μm for stainless steel, 0.48 ±0.17μm for aluminum and 0.52±0.12 μm for carbon steel

The Relationship Between Job Satisfaction And Life Satisfaction: Empirical Evidence From Logistics Practitioners In A South African Steel-Making Company

OpenAIRE

Chengedzai Mafini

2014-01-01

There has been an explosion of research interests centered upon the job satisfaction-life satisfaction nexus within organizations. Be that as it may, there is a relative paucity of research on the job satisfaction of logistics practitioners in general and limited evidence of studies that specifically address the issue of job satisfaction in the steel-making industry in developing countries. The aim of this study was to investigate the structural relationships between job satisfaction and life...

Kawasaki Steel Giho, Vol. 27, No. 4, 1995. Special issue on steel structure

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

;Contents (Partial): Vertical Gust Prediction of Cable-Stayed Bridges in Yawed Wind; Design and Construction of a Super Platform Structure Made of Steel; Prefabricated Steel Deck of Battledeck Floor Type for Redecking; Aesthetic Design of Structures; and Lift-up Construction Method for Multi-layer Building.

ONE PERSON COMPANY IN INDIA: A SYNOPTIC VIEW IN THE LIGHT OF THE COMPANIES ACT, 2013

OpenAIRE

ROY, SUHAS

2016-01-01

One Person Company (OPC) is a revolutionary concept that has been elaborately discussed in the Companies Act, 2013. It is one of the classifications of companies based on the number of persons. One Person Company (OPC) means a company which has only one individual as a member. Only natural-born citizens viz., small businessmen, entrepreneurs, artisans, weavers or traders among others can reap the benefits of One Person Company (OPC). Non-resident Indians cannot form an OPC. The shareholder sh...

Data for a steel industry model

OpenAIRE

Mæstad, Ottar

2000-01-01

SNF has recently developed a new model of the steel market and some of the major factor markets connected to the steel industry. The aim of the model has been to study how regulations of the emissions of carbon dioxide (CO2) in the steel industry might affect the structure of the industry. It has also been an objective to investigate how structural changes in the steel industry might influence on the industry’s demand for transport services. This paper outlines the details about the data that...

Symbolic aesthetics in steel structural systems

Directory of Open Access Journals (Sweden)

Usama Abdul-Mun'em Khuraibet

2015-02-01

Full Text Available The aesthetic expression and its orders are important for steel structures forming. Steel structures are a compilation of structural elements, where its shapes have standard dimensions and pre-fabricated. As the steel construction systems not only aim to achieve the functional requirements for users, but must also have the symbolic aesthetics which provides visually and cognitive expression for viewers. In this sense the research interested in expressional aesthetics in these systems and highlights the importance of attention as structural items. Therefore the visual items which related with steel structures contain some of the most powerful forms of modern architecture, steel structures with a glass cladding, agility and accuracy in manufacture of structural elements as visual items, structural interest in the forms of spaces which have long span systems or in high buildings are different forms of expression and influence. So the research focuses on the study of those expressive patterns related with the steel construction properties, including the advantages of these systems at the level of strength and firmness, flexibility and economy as well as aesthetic and expression. Accordingly, the research problem concentrated on educational shortage in the study of the structural steel system aspects concerning constructional characteristic, expressive and aesthetic features, and how to deal with them as a language bearing the symbols and meanings which have clear structural style, because it the best ways to make those systems as communication means with users, by premise that the use of expressional symbol in steel construction increases the aesthetic value. Therefore the research aims to reveal the most structural and expressive patterns by analysis the expressional means and steel structural aesthetics.

Future directions for ferritic/martensitic steels for nuclear applications

International Nuclear Information System (INIS)

Klueh, R.L.; Swindeman, R.W.

2000-01-01

High-chromium (7-12% Cr) ferritic/martensitic steels are being considered for nuclear applications for both fission and fusion reactors. Conventional 9-12Cr Cr-Mo steels were the first candidates for these applications. For fusion reactors, reduced-activation steels were developed that were patterned on the conventional steels but with molybdenum replaced by tungsten and niobium replaced by tantalum. Both the conventional and reduced-activation steels are considered to have an upper operating temperature limit of about 550degC. For improved reactor efficiency, higher operating temperatures are required. For ferritic/martensitic steels that could meet such requirements, oxide dispersion-strengthened (ODS) steels are being considered. In this paper, the ferritic/martensitic steels that are candidate steels for nuclear applications will be reviewed, the prospect for ODS steel development and the development of steels produced by conventional processes will be discussed. (author)

Stress corrosion cracking of austenitic stainless steels in high temperature water and alternative stainless steel

International Nuclear Information System (INIS)

Yonezawa, T.

2015-01-01

In order to clarify the effect of SFE on SCC resistance of austenitic stainless steels and to develop the alternative material of Type 316LN stainless steel for BWR application, the effect of chemical composition and heat treatment on SFE value and SCCGR in oxygenated high temperature water were studied. The correlation factors between SFE values for 54 heats of materials and their chemical compositions for nickel, molybdenum, chromium, manganese, nitrogen, silicon and carbon were obtained. From these correlation factors, original formulae for SFE values calculation of austenitic stainless steels in the SHTWC, SHTFC and AGG conditions were established. The maximum crack length, average crack length and cracked area of the IGSCC for 33 heats were evaluated as IGSCC resistance in oxygenated high temperature water. The IGSCC resistance of strain hardened nonsensitized austenitic stainless steels in oxygenated high temperature water increases with increasing of nickel contents and SFE values. From this study, it is suggested that the SFE value is a key parameter for the IGSCC resistance of non-sensitized strain hardened austenitic stainless steels. As an alternative material of Type 316LN stainless steel, increased SFE value material, which is high nickel, high chromium, low silicon and low nitrogen material, is recommendable. (author)

Third European Company Survey: Workplace innovation in European companies

OpenAIRE

Oeij, P.; Žiauberyté-Jakštiené, R.; Dhondt, S.; Corral, A.; Totterdill, P.; Preenen, P.

2015-01-01

Workplace innovation (WPI) is a developed and implemented practice or combination of practices which enables employees to participate in organisational change and renewal and hence improve the quality of working life and organisational performance. This report looks at reasons for enabling WPI, adoption and implementation, and impact on organisation and management, employees and employee representatives. The research is based on 51 companies identified in Eurofound’s third European Company Su...

75 FR 6791 - Surety Companies Acceptable on Federal Bonds-Termination: Trinity Universal Insurance Company

Science.gov (United States)

2010-02-10

.... However, no new bonds should be accepted from this company, and bonds that are continuous in nature should... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Trinity Universal Insurance Company AGENCY: Financial Management Service, Fiscal Service...

77 FR 29472 - Surety Companies Acceptable on Federal Bonds-Termination: Atlantic Bonding Company, Inc.

Science.gov (United States)

2012-05-17

... be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Termination: Atlantic Bonding Company, Inc. AGENCY: Financial Management Service, Fiscal Service, Department...

75 FR 33897 - Surety Companies Acceptable on Federal Bonds-Terminations: Commercial Alliance Insurance Company

Science.gov (United States)

2010-06-15

... be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds--Terminations: Commercial Alliance Insurance Company AGENCY: Financial Management Service, Fiscal Service...

Geographical proximity on the valuations of unlisted agrarian companies: Does distance from company to company and to strategic points matter?

Energy Technology Data Exchange (ETDEWEB)

Occhino, P.; Maté, M.

2017-07-01

This paper is a first attempt to examine the role played by the geography on agrarian firms’ valuations. The geography was evaluated through the physical proximity from agrarian companies to other companies and to some strategic points which ease their accessibility to external economic agents. To get our purpose, we developed an empirical application on a sample of non-listed agrarian Spanish companies located in the region of Murcia over the period 2010-2015. We applied Discount Cash Flow methodology for non-listed companies to get their valuations. With this information, we used spatial econometric techniques to analyse the spatial distribution of agrarian firms’ valuations and model the behavior of this variable. Our results supported the assertion that agrarian firms’ valuations are conditioned by the geography. We found that firms with similar valuations tend to be grouped together in the territory. In addition, we found significant effects on agrarian firms valuations derived from the geographical proximity among closer agrarian companies and from them to external agents and transport facilities.

Geographical proximity on the valuations of unlisted agrarian companies: Does distance from company to company and to strategic points matter?

International Nuclear Information System (INIS)

Occhino, P.; Maté, M.

2017-01-01

This paper is a first attempt to examine the role played by the geography on agrarian firms’ valuations. The geography was evaluated through the physical proximity from agrarian companies to other companies and to some strategic points which ease their accessibility to external economic agents. To get our purpose, we developed an empirical application on a sample of non-listed agrarian Spanish companies located in the region of Murcia over the period 2010-2015. We applied Discount Cash Flow methodology for non-listed companies to get their valuations. With this information, we used spatial econometric techniques to analyse the spatial distribution of agrarian firms’ valuations and model the behavior of this variable. Our results supported the assertion that agrarian firms’ valuations are conditioned by the geography. We found that firms with similar valuations tend to be grouped together in the territory. In addition, we found significant effects on agrarian firms valuations derived from the geographical proximity among closer agrarian companies and from them to external agents and transport facilities.

Steeling and Resilience in Art Education

Science.gov (United States)

Heise, Donalyn

2014-01-01

Steel is an incredibly strong alloy of iron and carbon. Due to its incredible strength and durability, this resilient material is commonly used for constructing buildings. The transitive verb "steeling" is defined in Miriam-Webster dictionary as "to fill with resolution or determination, as in, she 'steeled herself to face the…

75 FR 38188 - Surety Companies Acceptable on Federal Bonds-Termination: Stonebridge Casualty Insurance Company

Science.gov (United States)

2010-07-01

... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service [NAIC 10952] Surety Companies Acceptable on Federal Bonds--Termination: Stonebridge Casualty Insurance Company AGENCY: Financial Management Service, Fiscal...

75 FR 81331 - Surety Companies Acceptable on Federal Bonds: Termination-Penn Millers Insurance Company

Science.gov (United States)

2010-12-27

... should be accepted from this company, and bonds that are continuous in nature should not be renewed. The... DEPARTMENT OF THE TREASURY Fiscal Service Surety Companies Acceptable on Federal Bonds: Termination--Penn Millers Insurance Company AGENCY: Financial Management Service, Fiscal Service, Department...

Development of commercial nitrogen-rich stainless steels

International Nuclear Information System (INIS)

Liljas, M.

1999-01-01

This paper reviews the development of nitrogen alloyed stainless steels. Nitrogen alloying of austenitic stainless steels started at an early stage and was to a large extent caused by nickel shortage. However, direct technical advantages such as increased strength of the nitrogen alloyed steels made them attractive alternatives to the current steels. It was not until the advent of the AOD (argon oxygen decarburisation) process in the late 1960s that nitrogen alloying could be controlled to such accuracy that it became successful commercially on a broader scale. The paper describes production aspects and how nitrogen addition influences microstructure and the resulting properties of austenitic and duplex stainless steels. For austenitic steels there are several reasons for nitrogen alloying. Apart from increasing strength nitrogen also improves structural stability, work hardening and corrosion resistance. For duplex steels nitrogen also has a decisive effect in controlling the microstructure during thermal cycles such as welding. (orig.)

Damascus steels: history, processing, properties and carbon dating

International Nuclear Information System (INIS)

Wadsworth, J.

2007-01-01

In the mid-1970s, a class of steels containing high levels of carbon (∼ 1-2 wt% C) was developed for superplastic characteristics - that is, the ability to plastically deform to an extraordinary degree in tension at intermediate temperatures. Because these steels also had excellent room temperature properties, they were developed for their commercial potential. In the late 1970s, we became aware of the striking compositional similarities between these modern steels and the ancient steels of Damascus. This observation led us to revisit the history and metallurgy of Damascus steels and related steels. The legends and origins of Damascus steel date back to the time of Alexander the Great (323 BC) and the medieval Crusades (11th and 12th century AD), and this material has also been the subject of scrutiny by famous scientist in Europe, including Michael Faraday. Modern attempts to reproduce the legendary surface patterns which famously characterized Damascus steels are described. The extend to which the characteristics of Damascus steels are unusual is discussed. Finally, a program on radiocarbon dating was initiated to directly determine the age of about 50 ancient steels, including a Damascus knife, and the results are summarized. (author)

Why job autonomy matters for young companies' performance: company maturity as a moderator between job autonomy and company performance

NARCIS (Netherlands)

Preenen, P.T.Y.; Howaldt, J.; Oeij, P.R.A.; Dhondt, S.; Kraan, K.O.; Jansen, E.

2016-01-01

Although the positive impact of job autonomy has been widely shown for individual-level employee outcomes, research on job autonomy and company-level outcomes has been surprisingly scarce. Therefore, among 3,311 companies in the Netherlands, we investigate the relationship between employees' job

Designing of the chemical composition of steels basing on the hardenability of constructional steels

International Nuclear Information System (INIS)

Dobrzanski, L.A.; Sitek, W.

2003-01-01

The paper presents the original method of modelling of the relationships between chemical composition of alloy constructional steel and its hardenability, employing neural networks. Basing on the experimental results of the hardenability investigations, which employed Jominy method, the model of the neural networks was developed and fully verified experimentally. The model makes it possible to obtain Jominy hardenability curves basing on the steel chemical composition. The model of neural networks, making it possible to design the steel chemical composition, basing on the known Jominy hardenability curve shape, was developed also and fully verified numerically. (author)

Mechanical properties of irradiated 9Cr-2WVTa steel

International Nuclear Information System (INIS)

Klueh, R.L.; Alexander, D.J.; Rieth, M.

1998-01-01

An Fe-9Cr-2W-0.25V-0.07Ta-0.1C (9Cr-2WVTa) steel has excellent strength and impact toughness before and after irradiation in the Fast Flux Test Facility and the High Flux Reactor (HFR). The ductile-brittle transition temperature (DBTT) increased only 32 C after 28 dpa at 365 C in FFTF, compared to a shift of ∼60 C for a 9Cr-2WV steel--the same as the 9Cr-2WVTa steel but without tantalum. This difference occurred despite the two steels having similar tensile but without tantalum. This difference occurred despite the two steels having similar tensile properties before and after irradiation. The 9Cr-2WVTa steel has a smaller prior-austenite grain size, but otherwise microstructures are similar before irradiation and show similar changes during irradiation. The irradiation behavior of the 9Cr-2WVTa steel differs from the 9Cr-2WV steel and other similar steels in two ways: (1) the shift in DBTT of the 9Cr-2WVTa steel irradiated in FFTF does not saturate with fluence by ∼28 dpa, whereas for the 9Cr-2WV steel and most similar steels, saturation occurs at <10 dpa, and (2) the shift in DBTT for 9Cr-2WVTa steel irradiated in FFTF and HFR increased with irradiation temperature, whereas it decreased for the 9Cr-2WV steel, as it does for most similar steels. The improved properties of the 9Cr-2WVTa steel and the differences with other steels were attributed to tantalum in solution

Technical features of steel structure construction by Kawasaki Steel; Kawasaki Seitetsu no kokozo gijutsu no tokucho

Energy Technology Data Exchange (ETDEWEB)

Kaneko, T.; Urata, I.; Okata, S. [Kawasaki Steel Corp., Tokyo (Japan)

1996-03-01

In the steel structure technology of Kawasaki Steel, the joint technique (e.g., welding) is added to them while developing or improving the products that meet the social needs as a material supplier. Moreover, the execution technique that manufactures materials or constructs them as an integrated structure, the structural analysis that conforms to the function and application of a structure, and the design technique on dynamic properties or durability such as earthquake resistance, fatigue, and corrosion resistance are synthetically expanded for engineering. In this paper, a building steel frame, non-residence building, bridge, and harbor structure as steel structure in the building and construction fields were described for each structure genre. The structural technology of a building steel frame is summarized to the products of pillar materials. An earthquake brace, using a dead soft steel, with high earthquake energy absorption capability and a damping wall were also developed. The design and execution technique of a large roof was systematized. The exchange technique of a road bridge RC floor and the technique of an unstiffened suspension bridge for pipeline were developed. A new technique was also developed for a suspension monorail track and offshore structure. 30 refs., 5 figs.

Simple Heat Treatment for Production of Hot-Dip Galvanized Dual Phase Steel Using Si-Al Steels

Science.gov (United States)

Equihua-Guillén, F.; García-Lara, A. M.; Muñíz-Valdes, C. R.; Ortíz-Cuellar, J. C.; Camporredondo-Saucedo, J. E.

2014-01-01

This work presents relevant metallurgical considerations to produce galvanized dual phase steels from low cost aluminum-silicon steels which are produced by continuous strip processing. Two steels with different contents of Si and Al were austenized in the two-phase field ferrite + austenite (α + γ) in a fast manner to obtain dual phase steels, suitable for hot-dip galvanizing process, under typical parameters of continuous annealing processing line. Tensile dual phase properties were obtained from specimens cooled from temperature below Ar3, held during 3 min, intermediate cooling at temperature above Ar1 and quenching in Zn bath at 465 °C. The results have shown typical microstructure and tensile properties of galvanized dual phase steels. Finally, the synergistic effect of aluminum, silicon, and residual chromium on martensite start temperature ( M s), critical cooling rate ( C R), volume fraction of martensite, and tensile properties has been studied.

Corrosion behaviour of laser clad stainless steels

International Nuclear Information System (INIS)

Damborenea, J.J. de; Weerasinghe, V.M.; West, D.R.F.

1993-01-01

The present paper is focussed in the study of the properties of a clad layer of stainless steel on a mild steel. By blowing powder of the alloy into a melt pool generated by a laser of 2 KW, an homogeneous layer of 316 stainless steel can be obtained. Structure, composition and corrosion behaviour are similar to those of a stainless steel in as-received condition. (Author)

76 FR 10329 - Initiation of Antidumping and Countervailing Duty Administrative Reviews and Request for...

Science.gov (United States)

2011-02-24

... Ke Pipe Manufacturing Co. Daqing Petroleum Equipment Group Daye Xinye Special Steel Company Limited... Zhongyuan Steel Pipe Manufacturing Co., Ltd. Henan Nanyang Oilfield Machinery Manufacturing Company Limited... Highgrade Tubular Manufacturing (Tianjin) Co., Ltd. HillHead HSC (Chengdu) Seamless Steel Pipe Co., Ltd...

Ion-nitriding of austenitic stainless steels

International Nuclear Information System (INIS)

Pacheco, O.; Hertz, D.; Lebrun, J.P.; Michel, H.

1995-01-01

Although ion-nitriding is an extensively industrialized process enabling steel surfaces to be hardened by nitrogen diffusion, with a resulting increase in wear, seizure and fatigue resistance, its direct application to stainless steels, while enhancing their mechanical properties, also causes a marked degradation in their oxidation resistance. However, by adaption of the nitriding process, it is possible to maintain the improved wear resistant properties while retaining the oxidation resistance of the stainless steel. The controlled diffusion permits the growth of a nitrogen supersaturated austenite layer on parts made of stainless steel (AISI 304L and 316L) without chromium nitride precipitation. The diffusion layer remains stable during post heat treatments up to 650 F for 5,000 hrs and maintains a hardness of 900 HV. A very low and stable friction coefficient is achieved which provides good wear resistance against stainless steels under diverse conditions. Electrochemical and chemical tests in various media confirm the preservation of the stainless steel characteristics. An example of the application of this process is the treatment of Reactor Control Rod Cluster Assemblies (RCCAs) for Pressurized Water Nuclear Reactors

76 FR 77442 - Mutual Insurance Holding Company Treated as Insurance Company

Science.gov (United States)

2011-12-13

... insurance industry traces its roots back to England, where, in 1696, the first mutual fire insurer was... FEDERAL DEPOSIT INSURANCE CORPORATION 12 CFR Part 380 RIN 3064-AD89 Mutual Insurance Holding Company Treated as Insurance Company AGENCY: Federal Deposit Insurance Corporation (FDIC). ACTION: Notice...

The European Model Company Act

DEFF Research Database (Denmark)

Cleff, Evelyne Beatrix

2011-01-01

European Company Law regulation is currently undergoing a reform. These reforms raise a number of regulatory questions, such as what should be the aims of companies' legislation, and how these aims should best be met by regulation. Many of the reforms and discussions (both on EU and national level...... an increasing influence on the framing of company legislation, such as the choice between mandatory or default rules. This article introduces the project 'European Company Law and the choice of Regulatory Method' which is carried out in collaboration with the 'European Model Company Act Group'. The project aims...

High - speed steel for precise cased tools

International Nuclear Information System (INIS)

Karwiarz, J.; Mazur, A.

2001-01-01

The test results of high-vanadium high - speed steel (SWV9) for precise casted tools are presented. The face -milling cutters of NFCa80A type have been tested in industrial operating conditions. An average life - time of SWV9 steel tools was 3-10 times longer compare to the conventional high - speed milling cutters. Metallography of SWB9 precise casted steel revealed beneficial for tool properties distribution of primary vanadium carbides in the steel matrix. Presented results should be a good argument for wide application of high - vanadium high - speed steel for precise casted tools. (author)

The Bat'a Company in Zlín: A Shoe Company or a School Company?

Science.gov (United States)

Kasper, Tomáš; Kasperová, Dana

2018-01-01

The first part of the study focuses on the characteristics and analysis of Zlín as an example of a company town. Life in the company town is characterised as a means of forming 'a new man' in Bat'a's Zlín. The second section analyses the aims of worker education in Bat'a's Zlín (in the so-called Bat'a school of work) and highlights the methods and…

76 FR 58263 - Kenai Pipe Line Company; Tesoro Alaska Company; Tesoro Logistics Operations, LLC; Notice of...

Science.gov (United States)

2011-09-20

... DEPARTMENT OF ENERGY Federal Energy Regulatory Commission [Docket No. OR11-21-000] Kenai Pipe Line Company; Tesoro Alaska Company; Tesoro Logistics Operations, LLC; Notice of Request for Jurisdictional..., 2011, Kenai Pipe Line Company (KPL), Tesoro Alaska Company (Tesoro Alaska), and Tesoro Logistics, LLC...

Thermochemical surface engineering of steels

DEFF Research Database (Denmark)

Thermochemical Surface Engineering of Steels provides a comprehensive scientific overview of the principles and different techniques involved in thermochemical surface engineering, including thermodynamics, kinetics principles, process technologies and techniques for enhanced performance of steels...

78 FR 38309 - Northern Natural Gas Company; Southern Natural Gas Company, L.L.C.; Florida Gas Transmission...

Science.gov (United States)

2013-06-26

... Natural Gas Company; Southern Natural Gas Company, L.L.C.; Florida Gas Transmission Company, LLC; Notice of Application Take notice that on June 4, 2013, Northern Natural Gas Company (Northern), 1111 South 103rd Street, Omaha, Nebraska 68124; on behalf of itself, Southern Natural Gas Company, L.L.C., and...

Pittsburgh compound B (PiB) PET imaging of meningioma and other intracranial tumors.

Science.gov (United States)

Johnson, Derek R; Hunt, Christopher H; Nathan, Mark A; Parisi, Joseph E; Boeve, Bradley F; Murray, Melissa E; Knopman, David S; Jack, Clifford R; Petersen, Ronald C; Lowe, Val J; Johnson, Geoffrey B

2018-01-01

Meningiomas are the most common intracranial tumors. Diagnosis by MRI is generally straightforward, but lack of imaging specificity can present a diagnostic dilemma, particularly in patients with cancer. We report our experience with meningioma identification on Pittsburgh compound B (PiB) PET/CT. Patients who underwent PiB PET/CT from 2006 to 2015 were reviewed to identify those with intracranial tumors. Tumor types were classified by MR appearance, or by pathology when available. Maximum standardized uptake value (SUVmax) measurements of tumor PiB activity were compared across tumor types. 2472 patients underwent PiB PET/CT in the period of interest; 45 patients (1.8%) had probable or definite intracranial tumor. Tumor types were meningioma (29/45, 64%), vestibular schwannoma (7/45, 16%), pituitary macroadenoma (4/45, 9%), metastatic disease (2/45, 4%), and others (3/45, 7%). In patients with meningioma, the mean lesion SUVmax was 2.05 (SD 1.37), versus 1.00 (SD 0.42) in patients with non-meningioma tumors (p < 0.01). A receiver operating curve was created for lesion:cerebellum SUVmax ratio, with an area under the curve of 0.91 for a value of 1.68. At or above this ratio, specificity for meningioma was 100% (95% CI 79-100%) and sensitivity was 76% (95% CI 57-90%). PiB PET activity within an intracranial tumor is a highly specific and reasonably sensitive marker of meningioma. Further prospective evaluation is warranted to validate this result as well as to assess the performance of commercially available beta-amyloid radiotracers in meningioma identification.

Organizational architecture of multinational companies

OpenAIRE

Sikorová, Lenka

2009-01-01

The main goal of the bachelor thesis Organizational Architecture of Multinational Companies is to elaborate the overview of organizational structures that are used by modern global companies. The thesis contains an analysis of such companies development, principles of functioning, pros and cons and the opportunities which these brings. It also contains a description of the basic concepts associated with organizational architecture such as globalization, multinational companies and organizatio...

China Report, Economic Affairs, No. 360.

Science.gov (United States)

1983-07-05

output of medium steel plate, thin steel plate, silicon steel, strip steel, and seamless steel pipe increased by 10.1 percent. Output of major...Out of farm products is as follows: Grain and soybean of which: Paddy rice Chinese sorghum Millet Corn Soybean Cotton Peanuts Flue-cured...company and a silk company- were established. The reform of the distribution system was tried out at local industrial enterprises. Some state

Energy Saving Melting and Revert Reduction Technology (Energy-SMARRT): Clean Steel Casting Production

Energy Technology Data Exchange (ETDEWEB)

Kuyucak, Selcuk [CanmetMATERIALS; Li, Delin [CanmetMATERIALS

2013-12-31

Inclusions in steel castings can cause rework, scrap, poor machining, and reduced casting performance, which can obviously result in excess energy consumption. Significant progress in understanding inclusion source, formation and control has been made. Inclusions can be defined as non-metallic materials such as refractory, sand, slag, or coatings, embedded in a metallic matrix. This research project has focused on the mold filling aspects to examine the effects of pouring methods and gating designs on the steel casting cleanliness through water modeling, computer modeling, and melting/casting experiments. Early in the research project, comprehensive studies of bottom-pouring water modeling and low-alloy steel casting experiments were completed. The extent of air entrainment in bottom-poured large castings was demonstrated by water modeling. Current gating systems are designed to prevent air aspiration. However, air entrainment is equally harmful and no prevention measures are in current practice. In this study, new basin designs included a basin dam, submerged nozzle, and nozzle extension. The entrained air and inclusions from the gating system were significantly reduced using the new basin method. Near the end of the project, there has been close collaboration with Wescast Industries Inc., a company manufacturing automotive exhaust components. Both computer modeling using Magma software and melting/casting experiments on thin wall turbo-housing stainless steel castings were completed in this short period of time. Six gating designs were created, including the current gating on the pattern, non-pressurized, partially pressurized, naturally pressurized, naturally pressurized without filter, and radial choke gating without filter, for Magma modeling. The melt filling velocity and temperature were determined from the modeling. Based on the simulation results, three gating designs were chosen for further melting and casting experiments on the same casting pattern using

The problems of high-nitrogen steels production

International Nuclear Information System (INIS)

Svyazhin, A.G.; Kaputkina, L.M.; Efimenko, S.P.

1999-01-01

Analysis of existing technologies of high-nitrogen steel production shows that rational nitrogen content in mass production corresponds to moderate high values. Such steels can be smelted under normal or slightly elevated pressure in steelmaking units, using processes of mass- and special metallurgy. High-nitrogen steels with ''overequilibrium'' nitrogen content are promising, but technology and equipment for production of them are complicated, and production of such steels is therefore limited. (orig.)

Four state companies are markedly different

International Nuclear Information System (INIS)

Aalund, L.R.

1995-01-01

The Journal continues its profiles of state owned oil companies with a return to the Persian Gulf, South America, and a first time look at the state oil company of Romania, one of Eastern Europe's most active and oldest producers. The government of Kazakhstan's activities are also covered in this report. These profiles detail the organization of the companies, with emphasis on upstream and downstream operations. Support functions, though essential to a company, are not covered in detail. Company projects and capabilities are only described in this report when necessary to put the company in perspective. Following are the profiles of state companies for Bahrain, Kuwait, Romania, and Venezuela

Public Shareholdership Energy Companies

International Nuclear Information System (INIS)

Kist, A.W.; Crone, F.J.M.; Hudig, D.F.; Ketting, N.G.; De Swaan, T.; Willems, R.

2008-06-01

National and international developments on the energy markets and changes in legislation and regulation require a renewed strategic orientation of energy companies and their shareholders. Decentralized authorities will have to reconsider their position as a shareholder in energy companies carefully. This report provides an overview of the recommendations of the Kist Commission on how provinces and municipalities can make a well-considered choice as shareholder of energy companies. [mk] [nl

Behaviour of steels in natural environments: focus on stainless steels in natural sea water

International Nuclear Information System (INIS)

Feron, D.

2005-01-01

Corrosion behaviour of steels and alloys in natural environments is not only dependent to material parameters and environmental chemistry, but also to micro-organisms which may be there. The global approach used to investigate the behaviour of alloys in natural environments is illustrated by the work done on stainless steels in seawater. In aerated seawater, studies led to the proposal of an 'enzymatic model' based on the enzymatic catalyze of the cathodic reaction and which allows reproducing the electrochemical behaviour of stainless steels in natural seawater and the crevice corrosion phenomena observed in natural sea waters. Coupling areas under aerobic and anaerobic conditions leads to the worst situation for stainless steel behaviour: the catalysis of the cathodic reaction on aerobic exposed surfaces and the decrease of the corrosion resistance of anaerobic surfaces due to sulphides. These results lead to the concept of electro-active bio-films. (author)

Assessment of Health Consequences of Steel Industry Welders’ Occupational Exposure to Ultraviolet Radiation

Science.gov (United States)

Zamanian, Zahra; Mortazavi, Saied Mohammad Javad; Asmand, Ebrahim; Nikeghbal, Kiana

2015-01-01

Background: Welding is among the most important frequently used processes in the industry with a wide range of applications from the food industry to aerospace and from precision tools to shipbuilding. The aim of this study was to assess the level of steel industry welders’ exposure to ultraviolet (UV) radiation and to investigate the health impacts of these exposures. Methods: In this case–control study, we measured the intensity of UV at the workers’ wrist in Fars Steel Company through manufacture of different types of heavy metal structures, using UV-meter model 666230 made by Leybold Co., from Germany. Results: The population under the study comprised 400 people including 200 welders as the exposed group and 200 nonwelders as the unexposed group. The results of the questionnaire were analyzed using SPSS software, version 19. The average, standard deviation, maximum and minimum of the UV at the welders’ wrist were 0.362, 0.346, 1.27, and 0.01 μW/cm2, respectively. There was a significantly (P radiation level, and using personal protective equipment seem indispensable. As exposure to UV radiation can be linked to different types of skin cancer, skin aging, and cataract, welders should be advised to decrease their occupational exposures. PMID:26900437

Assessment of Health Consequences of Steel Industry Welders' Occupational Exposure to Ultraviolet Radiation.

Science.gov (United States)

Zamanian, Zahra; Mortazavi, Saied Mohammad Javad; Asmand, Ebrahim; Nikeghbal, Kiana

2015-01-01

Welding is among the most important frequently used processes in the industry with a wide range of applications from the food industry to aerospace and from precision tools to shipbuilding. The aim of this study was to assess the level of steel industry welders' exposure to ultraviolet (UV) radiation and to investigate the health impacts of these exposures. In this case-control study, we measured the intensity of UV at the workers' wrist in Fars Steel Company through manufacture of different types of heavy metal structures, using UV-meter model 666230 made by Leybold Co., from Germany. The population under the study comprised 400 people including 200 welders as the exposed group and 200 nonwelders as the unexposed group. The results of the questionnaire were analyzed using SPSS software, version 19. The average, standard deviation, maximum and minimum of the UV at the welders' wrist were 0.362, 0.346, 1.27, and 0.01 μW/cm(2), respectively. There was a significantly (P radiation level, and using personal protective equipment seem indispensable. As exposure to UV radiation can be linked to different types of skin cancer, skin aging, and cataract, welders should be advised to decrease their occupational exposures.

Structure of three Zlatoust bulats (Damascus-steel blades)

Science.gov (United States)

Schastlivtsev, V. M.; Gerasimov, V. Yu.; Rodionov, D. P.

2008-08-01

Chemical composition, structure, and hardness of samples of three Zlatoust bulats (Damascus steels), namely, an Anosov bulat blade (1841), Obukhov bulat blade (1859), and a Shvetsov forged bulat-steel blank (crucible steel) have been investigated. The Anosov bulat possesses all signs of the classical Damascus steel; this is a hypereutectoid carbon steel with a structure formed from chains of carbides against the background of fine pearlite (troostite). A banded pattern is revealed on the surface of the blade. The Obukhov blade cannot be referred to classical Damascus steel. The pattern on the surface of the blade is absent, despite the fact that the initial steel is hypereutectoid. The structure of the blade does not correspond to the structure of classical Damascus steel; this is bainite with numerous cementite particles. The Shvetsov sample cannot be regarded as Damascus steel since it is made from a hypereutectoid steel alloyed by managanese and tungsten. The pattern on the surface of the metal is a consequence of the dendritic structure of the ingot which is developed during forging. The structure of this pattern differs from classical damascene pattern, since the latter is formed due to a specific arrangement of a variety of carbide particles against the pearlitic or some other background obtained during heat treatment.

Effect of Using an Indoor Air Quality Sensor on Perceptions of and Behaviors Toward Air Pollution (Pittsburgh Empowerment Library Study): Online Survey and Interviews.

Science.gov (United States)

Wong-Parodi, Gabrielle; Dias, M Beatrice; Taylor, Michael

2018-03-08

Air quality affects us all and is a rapidly growing concern in the 21st century. We spend the majority of our lives indoors and can be exposed to a number of pollutants smaller than 2.5 microns (particulate matter, PM 2.5 ) resulting in detrimental health effects. Indoor air quality sensors have the potential to provide people with the information they need to understand their risk and take steps to reduce their exposure. One such sensor is the Speck sensor developed at the Community Robotics, Education and Technology Empowerment Lab at Carnegie Mellon University. This sensor provides users with continuous real-time and historical PM 2.5 information, a Web-based platform where people can track their PM 2.5 levels over time and learn about ways to reduce their exposure, and a venue (blog post) for the user community to exchange information. Little is known about how the use of such monitors affects people's knowledge, attitudes, and behaviors with respect to indoor air pollution. The aim of this study was to assess whether using the sensor changes what people know and do about indoor air pollution. We conducted 2 studies. In the first study, we recruited 276 Pittsburgh residents online and through local branches of the Carnegie Library of Pittsburgh, where the Speck sensor was made available by the researchers in the library catalog. Participants completed a 10- to 15-min survey on air pollution knowledge (its health impact, sources, and mitigation options), perceptions of indoor air quality, confidence in mitigation, current behaviors toward air quality, and personal empowerment and creativity in the spring and summer of 2016. In our second study, we surveyed 26 Pittsburgh residents in summer 2016 who checked out the Speck sensor for 3 weeks on the same measures assessed in the first study, with additional questions about the perception and use of the sensor. Follow-up interviews were conducted with a subset of those who used the Speck sensor. A series of paired t

Cold formability of steels

International Nuclear Information System (INIS)

Lafond, G.; Leclerq, G.; Moliexe, F.; Namdar, R.; Roesch, L.; Sanz, G.

1977-01-01

This work was essentially aimed to the study of the following three questions. Is it possible to assess the cold formability of steels using simple material properties as criteria. What values of mechanical properties can one expect to reach in cold formed parts. Are there simple ways of characterizing the speroidization treatments carried out on steels before cold forming operations. The present report describes the results obtained during this investigation. It is logically divided into three separate parts. Experimental study of cold formability in wire drawing. Influence of metallurgical variables on mechanical properties of high carbon cold drawn wires. Contribution to the study of characterization methods of cold forming steels subjected to a spheroidization heat treatment

Business Process Redesign Using EDI: the BHP steel experience

Directory of Open Access Journals (Sweden)

Paula Swatman

1994-05-01

Full Text Available EDI should not be seen as a competitive weapon - it does not offer a sustainable competitive advantage to its users as did the earlier inter-organisational systems (such as the various airline reservation systems. Instead EDI provides a standardised infrastructure upon which an adopting organisation can reengineer its business processes and thus confers a long-term, strategic and comparative advantage upon such an adopter. The potential for sustained competitive advantage to be derived from EDI arises from its integration with the organisational structure of its implementor, depending upon the implementing organisation's ability to redesign its business processes appropriately. This paper examines the case of (arguably the most sophisticated EDI-using company in Australia, BHP Steel, demonstrating the advantages obtainable by an organisation using EDI as a foundation for its reengineered organisational structure and business processes and concludes that: • there are real benefits to be obtained from an inter organisational electronic trading strategy founded on EDI as the enabling mechanism - benefits which are considerably more extensive than EDI's comparatively simple technical nature would appear to offer; • organisational gateways utilising an Application Generic approach to system integration and isolating the communications issue by insisting on the use of international data communications standards do offer a realistic and successful solution to the problem of internal and external trade for large and sophisticated organisations; • the majority of these achievements would have been either unlikely or totally impossible without BHP Steel's commitment to organisation-wide Business Process Redesign.

Risk Management in Insurance Companies

OpenAIRE

Yang, Xufeng

2006-01-01

Insurance is the uncertain business in uncertain society. Today, insures face more complex and difficult risks. Efficient risk management mechanisms are essential for the insurers. The paper is set out initially to explore UK insurance companies risk management and risk disclosure by examining companies annual report after all the listed insurance companies are required to disclose risk information in their annual report, which seeks to reflect the recent development in UK insurance companies...

High yttria ferritic ODS steels through powder forging

Science.gov (United States)

Kumar, Deepak; Prakash, Ujjwal; Dabhade, Vikram V.; Laha, K.; Sakthivel, T.

2017-05-01

Oxide dispersion strengthened (ODS) steels are being developed for future nuclear reactors. ODS Fe-18%Cr-2%W-0.2%Ti steels with 0, 0.35, 0.5, 1 and 1.5% Y2O3 (all compositions in weight%) dispersion were fabricated by mechanical alloying of elemental powders. The powders were placed in a mild steel can and forged in a stream of hydrogen gas at 1473 K. The steels were forged again to final density. The strength of ODS steel increased with yttria content. Though this was accompanied by a decrease in tensile elongation, all the steels showed significant ductility. The ductility in high yttria alloys may be attributed to improved inter-particle bonding between milled powders due to reduction of surface oxides by hydrogen. This may permit development of ODS steels with yttria contents higher than the conventional limit of 0.5%. It is suggested that powder forging is a promising route to fabricate ODS steels with high yttria contents and improved ductility.

Company Secretaries: Their duties and powers

OpenAIRE

2009-01-01

Every company must have a company secretary. Their main role is to: carry out the directors’ instructions; help ensure that the company obeys the law and its own constitutional rules; and prepare and maintain the associated company documents.

Behaviour of carbon steel and chromium steels in CO2 environments

International Nuclear Information System (INIS)

Lefebvre, B.; Bounie, P.; Guntz, G.; Prouheze, J.C.; Renault, J.J.

1984-01-01

The behavior in aqueous CO 2 environments of steel with chromium content between 0 and 22% has been studied by autoclave tests. The influence of chromium and molybdenum contents has been investigated particularly on 13 Cr steel. Conventional electrochemical test results are related to the CO 2 autoclave test results. The influence of the environment: temperature, chloride concentration, partial pressure of CO 2 and some amount of H 2 S on the corrosion resistance are discussed

CNG: Aiming to be an energy company, not a gas company

International Nuclear Information System (INIS)

Wheatley, R.

1997-01-01

Long before regulatory changes in the US paved the way for the union of natural gas and electric utility companies, Consolidated Natural Gas Co. (CNG) embarked on a strategy that would serve the company well in the 1990s. In 1995, CNG began a corporate repositioning to meet mounting competition, switching emphasis from its regulated businesses to the non-regulated side. The goal: to become an energy player, not only in the US but internationally. This paper focuses on the company's operations, business plans, and management strategies. The paper gives an overview, then discusses production of oil and gas, the growing exploration program and plans for the future

Startup activities of established Finnish companies

OpenAIRE

Saalasti, Sini

2016-01-01

Established companies have collaborated with startups for decades in order to enhance their capabilities in technology and innovation. However, in the recent years, the changes in the business environment have induced established companies to increase their collaboration with startups. Thus, startup activities of established companies have become a timely phenomenon. This study explores the startup activities of established companies by analyzing all the activity established companies conduct...

Microstructural Development during Welding of TRIP steels

NARCIS (Netherlands)

Amirthalingam, M.

2010-01-01

The Advanced High Strength Steels (AHSS) are promising solutions for the production of lighter automobiles which reduce fuel consumption and increase passenger safety by improving crash-worthiness. Transformation Induced Plasticity Steel (TRIP) are part of the advanced high strength steels which

Tribological Response of Heat Treated AISI 52100 Steels Against Steel and Ceramic Counterparts

Directory of Open Access Journals (Sweden)

Türedi E.

2017-09-01

Full Text Available AISI 52100 bearing steels are commonly used in applications requiring high hardness and abrasion resistance. The bearing steels are working under dynamic loads in service conditions and their toughness properties become important. In order to provide the desired mechanical properties, various heat treatments (austenizing, quenching and tempering are usually applied. In this study, AISI 52100 bearing steel samples were austenized at 900°C for ½ h and water quenched to room temperature. Then tempering was carried out at 795°C, 400°C and 200°C for ½ h. In order to investigate the effect of heat treatment conditions on wear behavior, dry friction tests were performed according to ASTM G99-05 Standard with a ‘ball-on-disk’ type tribometer. The samples were tested against steel and ceramic counterparts using the parameters of 100 m distance and 30 N load and 0.063 m/s rotational speed. After wear test, the surface characterization was carried out using microscopy. Wear loss values were calculated using a novel optical method on both flat and counterpart specimens.