WorldWideScience

Sample records for standard dataway system

  1. Design of a dataway processor for a parallel image signal processing system

    Science.gov (United States)

    Nomura, Mitsuru; Fujii, Tetsuro; Ono, Sadayasu

    1995-04-01

    Recently, demands for high-speed signal processing have been increasing especially in the field of image data compression, computer graphics, and medical imaging. To achieve sufficient power for real-time image processing, we have been developing parallel signal-processing systems. This paper describes a communication processor called 'dataway processor' designed for a new scalable parallel signal-processing system. The processor has six high-speed communication links (Dataways), a data-packet routing controller, a RISC CORE, and a DMA controller. Each communication link operates at 8-bit parallel in a full duplex mode at 50 MHz. Moreover, data routing, DMA, and CORE operations are processed in parallel. Therefore, sufficient throughput is available for high-speed digital video signals. The processor is designed in a top- down fashion using a CAD system called 'PARTHENON.' The hardware is fabricated using 0.5-micrometers CMOS technology, and its hardware is about 200 K gates.

  2. KOMPEKS standard provides an extended use of the CAMAC datanay

    International Nuclear Information System (INIS)

    Basiladze, S.G.

    1983-01-01

    A new KOMPEKS standard design developed on the base of extended use of CAMAC dataway is described. The time diagram of the KOMPEKS standard cycle is given. Methods of addressing, control and status signals as well as procedure of processing inquiries for servicing are considered. The new standard is concluded to eliminating such shortcomings of the CAMAC standard as small address space, synchronism of the dataway cycle, limited number of inquiry sources. Use of this standard in automation systems for scientific research is of greatest interest because it is similar to the CAMAC standard in design, structure of dataway and permits to use the whole accumulated family of the CAMAC modules

  3. A data input controller for an alphanumeric and function keyboard with ports to the CAMAC-dataway or the serial plasma display controller

    International Nuclear Information System (INIS)

    Zahn, J.; Komor, Z.; Geldmeyer, H.J.

    1976-01-01

    A data input controller has been developed to allow the data transfer from an alphanumeric and function keyboard to the CAMAC-dataway or via the plasma display controller SIG-8AS/S and a serial transmission line to the TTY-/V.24-port of a computer. (orig.) [de

  4. A digital control and monitoring system for PWR waste-disposal systems

    International Nuclear Information System (INIS)

    Ueda, Toshiharu; Fuchigami, Kazuyuki; Shimozato, Masao; Takazawa, Kazuo

    1982-01-01

    Mitsubishi Electric has developed a digital control and monitoring system for PWR waste-disposal systems. This novel system has improved operability due to its automated operations and control, and integrated supervisory functions. The system includes other features to improve operability: sequence control by a control computer, direct-digital process control, integrated supervision of operation states by a supervisory computer and a high-speed dataway, and CRT interfacing between the computer and dataway. (author)

  5. Standard NIM instrumentation system

    CERN Document Server

    1990-01-01

    NIM is a standard modular instrumentation system that is in wide use throughout the world. As the NIM system developed and accommodations were made to a dynamic instrumentation field and a rapidly advancing technology, additions, revisions and clarifications were made. These were incorporated into the standard in the form of addenda and errata. This standard is a revision of the NIM document, AEC Report TID- 20893 (Rev 4) dated July 1974. It includes all the addenda and errata items that were previously issued as well as numerous additional items to make the standard current with modern technology and manufacturing practice.

  6. Intelligent Transportation Systems : critical standards

    Science.gov (United States)

    1999-06-01

    Intelligent Transportation Systems (ITS) standards are industry-consensus standards that provide the details about how different systems interconnect and communicate information to deliver the ITS user services described in the National ITS Architect...

  7. Design and operation of the LAMPF Auxiliary Controller. High-speed remote processing on the CAMAC dataway

    International Nuclear Information System (INIS)

    Machen, D.R.

    1979-02-01

    A CAMAC Auxiliary Controller has been developed to further the concepts of distributed processing in both process control and experiment data-acquisition systems. The Auxiliary Controller is built around a commercially available 16-bit microcomputer and a high-speed bit-sliced microprocessor capable of instruction execution times of 140 ns. The modular nature of the controller allows the user to tailor the controller capabilities to the system problem, while maintaining the interface techniques of the CAMAC Standard

  8. Mini-computer in standard CAMAC

    International Nuclear Information System (INIS)

    Meyer, J.M.; Perrin, J.; Lecoq, J.; Tedjini, H.; Metzger, G.

    1975-01-01

    CAMAC is the designation of rules for the design and use of modular electronic data-handling equipment. The rules offer a standard scheme for interfacing computers to transducers and actuators in on-line systems. Where systems do not need a large memory capacity or where computing power is provided by an associated computer, a processor implemented in a CAMAC structure will be of a great interest for such a standard. In such a way built such a processor with an INTEL 8008 CPU chip with use of a CAMAC crate, a memory bus, an 1/0 bus or CAMAC horizontal Dataway and a bus connecting the CPU to the operator's panel. The interrupt system has six levels. To allow multi-programmation, the 8008's instruction set was extended with the creating of an Jump and mark instruction. A multi-task operating system was implemented allowing the execution of real time tasks, process control and program debugging. Three units have been built nowadays for: process control, education, test of CAMAC modules, image processing [fr

  9. Standardization of detector control systems

    International Nuclear Information System (INIS)

    Fukunaga, Chikara

    2000-01-01

    Current and future detectors for high-energy and/or nuclear physics experiments require highly intelligent detector control systems. In order to reduce resources, the construction of a standardized template for the control systems based on the commercially available superviser control and data acquisition (SCADA) system has been proposed. The possibility of constructing this template is discussed and several key issues for evaluation of SCADA as the basis for such a template are presented. (author)

  10. Metadata Standards and Workflow Systems

    Science.gov (United States)

    Habermann, T.

    2012-12-01

    All modern workflow systems include mechanisms for recording inputs, outputs and processes. These descriptions can include details required to reproduce the workflows exactly and, in some cases, can include virtual images of the hardware and operating system. There are several on-going and emerging standards for representing these detailed workflows including the Open Provenance Model (OPM) and the W3C PROV. At the same time, ISO metadata standards include a simple provenance or lineage model that includes many important elements of workflows. The ISO model could play a critical role in sharing and discovering workflow information for collections and perhaps in recording some details in granules. In order for this goal to be reached, connections between the detailed standards and ISO must be understood and conventions for using them must be developed.

  11. Standard-E hydrogen monitoring system shop acceptance test report

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1997-01-01

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication

  12. Standard-E hydrogen monitoring system shop acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1997-10-02

    The purpose of this report is to document that the Standard-E Hydrogen Monitoring Systems (SHMS-E), fabricated by Mid-Columbia Engineering (MCE) for installation on the Waste Tank Farms in the Hanford 200 Areas, are constructed as intended by the design. The ATP performance will verify proper system fabrication.

  13. Global Positioning System Standard Positioning Service Performance Standard

    Science.gov (United States)

    2008-09-01

    The U.S. Global Positioning System (GPS) Standard Positioning Service (SPS) consists of space-based positioning, navigation, and timing (PNT) signals delivered free of direct user fees for peaceful civil, commercial, and scientific uses worldwide. Th...

  14. INTEGRATIVE AUGMENTATION OF STANDARDIZED MANAGEMENT SYSTEMS

    Directory of Open Access Journals (Sweden)

    Stanislav Karapetrovic

    2008-03-01

    Full Text Available The development, features and integrating abilities of different international standards related to management systems are discussed. A group of such standards that augment the performance of quality management systems in organizations is specifically focused on. The concept, characteristics and an illustrative example of one augmenting standard, namely ISO 10001, are addressed. Integration of standardized augmenting systems, both by themselves and within the overall management system, is examined. It is argued that, in research and practice alike, integrative augmentation represents the future of standardized quality and other management systems.

  15. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a ''standard model''. The ''standard model'' consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the ''standard model'' to determine if the requirements of ''non-standard'' architectures can be met. Several possible extensions to the ''standard model'' are suggested including software as well as the hardware architectural feature

  16. Control system architecture: The standard and non-standard models

    International Nuclear Information System (INIS)

    Thuot, M.E.; Dalesio, L.R.

    1993-01-01

    Control system architecture development has followed the advances in computer technology through mainframes to minicomputers to micros and workstations. This technology advance and increasingly challenging accelerator data acquisition and automation requirements have driven control system architecture development. In summarizing the progress of control system architecture at the last International Conference on Accelerator and Large Experimental Physics Control Systems (ICALEPCS) B. Kuiper asserted that the system architecture issue was resolved and presented a open-quotes standard modelclose quotes. The open-quotes standard modelclose quotes consists of a local area network (Ethernet or FDDI) providing communication between front end microcomputers, connected to the accelerator, and workstations, providing the operator interface and computational support. Although this model represents many present designs, there are exceptions including reflected memory and hierarchical architectures driven by requirements for widely dispersed, large channel count or tightly coupled systems. This paper describes the performance characteristics and features of the open-quotes standard modelclose quotes to determine if the requirements of open-quotes non-standardclose quotes architectures can be met. Several possible extensions to the open-quotes standard modelclose quotes are suggested including software as well as the hardware architectural features

  17. Reconfigurable radio systems network architectures and standards

    CERN Document Server

    Iacobucci, Maria Stella

    2013-01-01

    This timely book provides a standards-based view of the development, evolution, techniques and potential future scenarios for the deployment of reconfigurable radio systems.  After an introduction to radiomobile and radio systems deployed in the access network, the book describes cognitive radio concepts and capabilities, which are the basis for reconfigurable radio systems.  The self-organizing network features introduced in 3GPP standards are discussed and IEEE 802.22, the first standard based on cognitive radio, is described. Then the ETSI reconfigurable radio systems functional ar

  18. Control Systems Cyber Security Standards Support Activities

    Energy Technology Data Exchange (ETDEWEB)

    Robert Evans

    2009-01-01

    The Department of Homeland Security’s Control Systems Security Program (CSSP) is working with industry to secure critical infrastructure sectors from cyber intrusions that could compromise control systems. This document describes CSSP’s current activities with industry organizations in developing cyber security standards for control systems. In addition, it summarizes the standards work being conducted by organizations within the sector and provides a brief listing of sector meetings and conferences that might be of interest for each sector. Control systems cyber security standards are part of a rapidly changing environment. The participation of CSSP in the development effort for these standards has provided consistency in the technical content of the standards while ensuring that information developed by CSSP is included.

  19. Software Development Standard for Mission Critical Systems

    Science.gov (United States)

    2014-03-17

    6.2 for the OCD DID identifier. 5.3.3 System Requirements Definition 1. Based on the analysis of user needs, the operational concepts, and other...AEROSPACE REPORT NO. TR-RS-2015-00012 Software Development Standard for Mission Critical Systems March 17, 2014 Richard. J. Adams1, Suellen...Final 3. DATES COVERED - 4. TITLE AND SUBTITLE Software Development Standard for Mission Critical Systems 5a. CONTRACT NUMBER FA8802-14-C-0001

  20. Americal National Standard critical accident alarm system

    International Nuclear Information System (INIS)

    Smith, D.R.

    1975-01-01

    An American National Standard has been developed to provide guidance for the design, maintenance, and use of criticality accident alarm systems. Discussion includes several details of this Standard, N16.2-1969, and of a revised version which is now nearing certification

  1. Standard Procurement System Use and User Satisfaction

    National Research Council Canada - National Science Library

    2001-01-01

    The audit was performed in response to concerns expressed by the Chairman, House of Representatives Committee on Budget that DoD was not effectively spending Federal funds to acquire the Standard Procurement System (SPS...

  2. Traceability system for radioactivity standards in Japan

    International Nuclear Information System (INIS)

    Hino, Yoshio

    2000-01-01

    The electrotechnical laboratory (ETL) is the one of the largest national research institute, affiliated with the Ministry of International Trade and Industry (MITI). The ETL has a role to maintain the national standards of electricity, acoustics, visible light, ionizing radiation and radioactivity. The primary radioactivity standards have been established in ETL mainly with the 4πβ-γ coincidence method. The liquid scintillation counters and multi-wire proportional counters are also used for pure-beta and surface emission rate standards, respectively. As for the traceability, the primary standard sources are transferred to the Japan Radio Isotope Association (JRIA), and the JRIA measure these sources to calibrate their secondary standard equipments such as high pressurized 4π ionization chambers, high pore Ge and Nal (Tl) gamma spectrometers. The primary sources are also sent to the BIPM and neighboring countries for the intercomparisons to keep the consistency of the national standards. In this paper, these measurement techniques for the primary standardization and transfer system will be introduced, and some results of comparisons for certificate the traceability system will be described. (author)

  3. Traceability system for radioactivity standards in Japan

    Energy Technology Data Exchange (ETDEWEB)

    Hino, Yoshio [Electrotechnical Laboratory, Tsukuba, Ibaraki (Japan)

    2000-10-01

    The electrotechnical laboratory (ETL) is the one of the largest national research institute, affiliated with the Ministry of International Trade and Industry (MITI). The ETL has a role to maintain the national standards of electricity, acoustics, visible light, ionizing radiation and radioactivity. The primary radioactivity standards have been established in ETL mainly with the 4{pi}{beta}-{gamma} coincidence method. The liquid scintillation counters and multi-wire proportional counters are also used for pure-beta and surface emission rate standards, respectively. As for the traceability, the primary standard sources are transferred to the Japan Radio Isotope Association (JRIA), and the JRIA measure these sources to calibrate their secondary standard equipments such as high pressurized 4{pi} ionization chambers, high pore Ge and Nal (Tl) gamma spectrometers. The primary sources are also sent to the BIPM and neighboring countries for the intercomparisons to keep the consistency of the national standards. In this paper, these measurement techniques for the primary standardization and transfer system will be introduced, and some results of comparisons for certificate the traceability system will be described. (author)

  4. Standardization of penetrating radiation testing system

    International Nuclear Information System (INIS)

    Wiley, P.A.; Aronson, H.L.

    1979-01-01

    Standardization is provided to control system gain of a penetrating radiation testing system by periodically inspecting a reference object in the same manner as the product samples so as to generate a stabilization signal which is compared to a reference signal. The difference, if any, between the stabilization signal and the reference signal is integrated and the integrated signal is used to correct the gain of the system

  5. Safety standards of IAEA for management systems

    International Nuclear Information System (INIS)

    Vincze, P.

    2005-01-01

    IAEA has developed a new series of safety standards which are assigned for constitution of the conditions and which give the instruction for setting up the management systems that integrate the aims of safety, health, life environment and quality. The new standard shall replace IAEA 50-C-Q - Requirements for security of the quality for safety in nuclear power plants and other nuclear facilities as well as 14 related safety instructions mentioned in the Safety series No. 50-C/SG-Q (1996). When developing of this complex, integrated set of requirements for management systems, the IAEA requirements 50-C-Q (1996) were taken into consideration as well as the publications developed within the International organisation for standardization (ISO) ISO 9001:2000 and ISO14001: 1996. The experience of European Union member states during the development, implementation and improvement of the management systems were also taken into consideration

  6. PROWAY - a standard for distributed control systems

    International Nuclear Information System (INIS)

    Gellie, R.W.

    1980-01-01

    The availability of cheap and powerful microcomputer and data communications equipment has led to a major revision of instrumentation and control systems. Intelligent devices can now be used and distributed about the control system in a systematic and economic manner. These sub-units are linked by a communications system to provide a total system capable of meeting the required plant objectives. PROWAY, an international standard process data highway for interconnecting processing units in distributed industrial process control systems, is currently being developed. This paper describes the salient features and current status of the PROWAY effort. (auth)

  7. Business School's Performance Management System Standards Design

    Science.gov (United States)

    Azis, Anton Mulyono; Simatupang, Togar M.; Wibisono, Dermawan; Basri, Mursyid Hasan

    2014-01-01

    This paper aims to compare various Performance Management Systems (PMS) for business school in order to find the strengths of each standard as inputs to design new model of PMS. There are many critical aspects and gaps notified for new model to improve performance and even recognized that self evaluation performance management is not well…

  8. Analysis and suggestions on standard system for general nuclear instruments

    International Nuclear Information System (INIS)

    Xiong Zhenglong

    1999-08-01

    The standard system has been analyzed and researched for the general nuclear instruments and propounded following suggestions against the problems in standard's system: seriously adopting the international standards and recommending Chinese standards toward the world; appropriately regularizing the system's frame and the standard's configurations to make it more scientific, perfect and applicable; enhancing the construction of technical and basic standards, promoting the standardization of entire nuclear instruments; replenishing the standards of the testing methods and straightening out the standard's level, further completing the standard's system. In short, all of them are to enhance quality, readability and maneuverability of standards, to exert sufficiently the effects of standards

  9. Multipurpose laboratory test system applying CAMAC standards

    Energy Technology Data Exchange (ETDEWEB)

    Bowers, J.L.

    1976-11-01

    A flexible electronic product test and evaluation system is proposed. A system study was performed to determine how increasingly complex telemetry systems could be effectively evaluated during development and preproduction and after first production units were built. A primary requirement was that this system remain flexible with respect to configuration and mission and that it be easily maintainable. In addition, the system must be upgraded easily as old product requirements and definitions are replaced by new designs. As a result of this study it is concluded that this project would involve the expenditure of considerable funds and manpower at the beginning of the project and that the cost effectiveness of the system would be dependent upon its utilization and management. This study also demonstrates how the use of computer interface hardware standards (IEEE 583) can minimize requirements for expensive specially designed test equipment for each application.

  10. NASA's SDR Standard: Space Telecommunications Radio System

    Science.gov (United States)

    Reinhart, Richard C.; Johnson, Sandra K.

    2007-01-01

    A software defined radio (SDR) architecture used in space-based platforms proposes to standardize certain aspects of radio development such as interface definitions, functional control and execution, and application software and firmware development. NASA has charted a team to develop an open software defined radio hardware and software architecture to support NASA missions and determine the viability of an Agency-wide Standard. A draft concept of the proposed standard has been released and discussed among organizations in the SDR community. Appropriate leveraging of the JTRS SCA, OMG s SWRadio Architecture and other aspects are considered. A standard radio architecture offers potential value by employing common waveform software instantiation, operation, testing and software maintenance. While software defined radios offer greater flexibility, they also poses challenges to the radio development for the space environment in terms of size, mass and power consumption and available technology. An SDR architecture for space must recognize and address the constraints of space flight hardware, and systems along with flight heritage and culture. NASA is actively participating in the development of technology and standards related to software defined radios. As NASA considers a standard radio architecture for space communications, input and coordination from government agencies, the industry, academia, and standards bodies is key to a successful architecture. The unique aspects of space require thorough investigation of relevant terrestrial technologies properly adapted to space. The talk will describe NASA s current effort to investigate SDR applications to space missions and a brief overview of a candidate architecture under consideration for space based platforms.

  11. Global Positioning System wide area augmentation system (WAAS) performance standard.

    Science.gov (United States)

    2008-10-31

    The U.S. Global Positioning System (GPS) Standard Positioning Service (SPS) consists of spacebased : positioning, navigation, and timing (PNT) signals generated from space vehicles orbiting the : earth and delivered free of direct user fees for civil...

  12. The Adoption of Management Systems Standards

    Directory of Open Access Journals (Sweden)

    Idris Mohd Azman

    2014-11-01

    Full Text Available Considers the extent to which Standards Based Management Systems and best practices are being successfully implemented in Malaysian organizations. A survey on Malaysian organizations was conducted in June 2011 and has produced 143 positive responses. Highlights the findings of the survey such as the status of ISO 9000, TQM, 5-S, QCCs and quality tools & techniques, the benefits and difficulties, best practices most frequently used and the future trend of Malaysian quality improvement activities. Also highlights a model for the implementation of TQM for Malaysian organizations.

  13. Integration of Standardized Management Systems: A Dilemma?

    Directory of Open Access Journals (Sweden)

    Manuel Ferreira Rebelo

    2015-06-01

    Full Text Available The growing proliferation of management systems standards (MSSs, and their individualized implementation, is a real problem faced by organizations. On the other hand, MSSs are aimed at improving efficiency and effectiveness of organizational responses in order to satisfy the requirements, needs and expectations of the stakeholders. Each organization has its own identity and this is an issue that cannot be neglected; hence, two possible approaches can be attended. First, continue with the implementation of individualized management systems (MSs; or, integrate the several MSSs versus related MSs into an integrated management system (IMS. Therefore, in this context, organizations are faced with a dilemma, as a result of the increasing proliferation and diversity of MSSs. This paper takes into account the knowledge gained through a case study conducted in the context of a Portuguese company and unveils some of the advantages and disadvantages of integration. A methodology is also proposed and presented to support organizations in developing and structuring the integration process of their individualized MSs, and consequently minimize problems that are generators of inefficiencies, value destruction and loss of competitiveness. The obtained results provide relevant information that can support Top Management decision in solving that dilemma and consequently promote a successful integration, including a better control of business risks associated to MSSs requirements and enhancing sustainable performance, considering the context in which organizations operate.

  14. Rough Standard Neutrosophic Sets: An Application on Standard Neutrosophic Information Systems

    Directory of Open Access Journals (Sweden)

    Nguyen Xuan Thao

    2016-12-01

    Full Text Available A rough fuzzy set is the result of the approximation of a fuzzy set with respect to a crisp approximation space. It is a mathematical tool for the knowledge discovery in the fuzzy information systems. In this paper, we introduce the concepts of rough standard neutrosophic sets and standard neutrosophic information system, and give some results of the knowledge discovery on standard neutrosophic information system based on rough standard neutrosophic sets.

  15. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2006-05-01

    The use of cyber security standards can greatly assist in the protection of process control systems by providing guidelines and requirements for the implementation of computer-controlled systems. These standards are most effective when the engineers and operators, using the standards, understand what each standard addresses. This paper provides an overview of several standards that deal with the cyber security of process measurements and control systems.

  16. Survey of standards applicable to a database management system

    Science.gov (United States)

    Urena, J. L.

    1981-01-01

    Industry, government, and NASA standards, and the status of standardization activities of standards setting organizations applicable to the design, implementation and operation of a data base management system for space related applications are identified. The applicability of the standards to a general purpose, multimission data base management system is addressed.

  17. Computer systems and software description for Standard-E+ Hydrogen Monitoring System (SHMS-E+)

    International Nuclear Information System (INIS)

    Tate, D.D.

    1997-01-01

    The primary function of the Standard-E+ Hydrogen Monitoring System (SHMS-E+) is to determine tank vapor space gas composition and gas release rate, and to detect gas release events. Characterization of the gas composition is needed for safety analyses. The lower flammability limit, as well as the peak burn temperature and pressure, are dependent upon the gas composition. If there is little or no knowledge about the gas composition, safety analyses utilize compositions that yield the worst case in a deflagration or detonation. Knowledge of the true composition could lead to reductions in the assumptions and therefore there may be a potential for a reduction in controls and work restrictions. Also, knowledge of the actual composition will be required information for the analysis that is needed to remove tanks from the Watch List. Similarly, the rate of generation and release of gases is required information for performing safety analyses, developing controls, designing equipment, and closing safety issues. This report outlines the computer system design layout description for the Standard-E+ Hydrogen Monitoring System

  18. 7 CFR 277.6 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 4 2010-01-01 2010-01-01 false Standards for financial management systems. 277.6... ADMINISTRATIVE COSTS OF STATE AGENCIES § 277.6 Standards for financial management systems. (a) General. This section prescribes standards for financial management systems in administering program funds by the State...

  19. 46 CFR 154.1205 - Mechanical ventilation system: Standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Mechanical ventilation system: Standards. 154.1205... CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and Equipment Cargo Area: Mechanical Ventilation System § 154.1205 Mechanical ventilation system: Standards. (a...

  20. Standard-D hydrogen monitoring system, system design description

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1996-01-01

    During most of the year, it is assumed that the vapor space in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty-five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gasses to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gasses from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. The Standard Hydrogen Monitoring System (SHMS) is designed to monitor and quantify the percent hydrogen concentration during these potential gas releases. This document describes the design of the Standard-D Hydrogen Monitoring System, (SHMS-D) and its components as it differs from the original SHMS

  1. 75 FR 65051 - Consensus Standards, Standard Practice for Inspection of Airplane Electrical Wiring Systems

    Science.gov (United States)

    2010-10-21

    ... Practice for Inspection of Airplane Electrical Wiring Systems AGENCY: Federal Aviation Administration, DOT...'s F2696-08 Standard Practice for Inspection of Airplane Electrical Wiring Systems (Standard Practice) as an acceptable means of compliance to 14 CFR part 23 sections concerning electrical wiring systems...

  2. 'RADAR': Euratom's standard unattended data acquisition system

    International Nuclear Information System (INIS)

    Schwalbach, P.; Holzleitner, L.; Jung, S.; Chare, P.; Smejkal, A.; Swinhoe, M.; Kloeckner, W.

    2001-01-01

    Full text: The physical verification of nuclear material is an essential part of Euratom's inspection activities. Industrial plants handling large amounts of bulk material typically require large numbers of measurements. Modem plants, particularly plutonium-handling facilities, are normally automated and make it difficult for the inspector to access the material. Adapting to the plant requirements with respect to safety and security as well as economics (throughput), safeguards instrumentation is today often integrated into the plant. In order to optimize scarce inspection resources, the required measurements as well as the data analysis have to be done automatically as far as feasible. For automatic measurements Euratom has developed a new unattended data acquisition system, called RADAR (Remote Acquisition of Data and Review), which has been deployed to more than a dozen installations, handling more than 100 sensors (neutron and gamma radiations detectors, balances, seals, identity readers, switches, etc.). RADAR is the standard choice for new systems but is also replacing older automatic data systems slowly as they become outdated. RADAR and most of the associated analysis tools are the result of an in-house development, with the support of external software contractors where appropriate. Experience with turn-key systems led, in 1997, to the conclusion that in-house development would be a more effective use of resources than to buy third party products. RADAR has several layers, which will be discussed in detail in the presentation. The inner core of the package consists of services running under Windows NT. This core has watchdog and logging functions, contains a scheduler and takes care of replicating files across a network. Message and file exchange is based on TCP/IP. The replicator service contains compression and encryption facilities, the encryption is based on POP. With the help of routers, e.g. from CISCO, network connections to remote locations can be

  3. A CAMAC system for cardiologic monitoring

    International Nuclear Information System (INIS)

    Ouali, Abderrazak

    1977-01-01

    Standard CAMAC rules and features are summarized and a configuration is described for E.C.G. monitoring in intensive care units. This configuration contains intelligent modules (including microprocessors) for the biomedical signals pre-processing and for the CAMAC control. One of these modules analyses in real time the arrythmias from two different E.C.G. channels. With micro-programmed algorithms each arrhythmia is counted and stored in numerical files which are transmitted via the CAMAC data-way to an autonomous crate controller JCAM-10 linked to an interactive graphic and alphanumeric display unit. (author) [fr

  4. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 10 discusses the Steam and Power Conversion System and Radioactive Waste Management

  5. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems

  6. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report--Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This report, Volume 13, documents increase and decrease of reactor cooling system inventory and radioactive material release from a subsystem or component

  7. [Brief history of pharmaceutical standard system in China].

    Science.gov (United States)

    Zhang, Jianwu; Xiao, Shiying; Dong, Guofeng; Liu, Wei; Di, Feng; Yang, Xujie

    2010-03-01

    Pharmaceutical standard system which belongs to an important part of national drug policies is an inevitable result of the development of pharmacy. There was a long standing of pharmaceutical standard system in China whose germination could be traced back to Qin and Han dynasties, and it had laid a solid foundation for the establishment and improvement of modern pharmaceutical standard system by continual accumulation from the past dynasties. Since the founding of new China, distinguished achievements had been obtained on pharmaceutical standardization working,and currently it is in a new developing stage. There was a brief description in this paper on the development history of pharmaceutical standard system in China.

  8. 10 CFR 600.311 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Standards for financial management systems. 600.311... Requirements § 600.311 Standards for financial management systems. (a) Recipients are encouraged to use existing financial management systems to the extent that the systems comply with Generally Accepted...

  9. 46 CFR 153.312 - Ventilation system standards.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 5 2010-10-01 2010-10-01 false Ventilation system standards. 153.312 Section 153.312... Handling Space Ventilation § 153.312 Ventilation system standards. A cargo handling space ventilation system must meet the following: (a) A ventilation system exhaust duct must discharge no less than 10 m...

  10. Assessment of Safety Standards for Automotive Electronic Control Systems

    Science.gov (United States)

    2016-06-01

    This report summarizes the results of a study that assessed and compared six industry and government safety standards relevant to the safety and reliability of automotive electronic control systems. These standards include ISO 26262 (Road Vehicles - ...

  11. System 80+trademark standard design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+ TM Standard Design

  12. 75 FR 65052 - Consensus Standards, Standard Practice for Maintenance of Airplane Electrical Wiring Systems

    Science.gov (United States)

    2010-10-21

    ... Practice for Maintenance of Airplane Electrical Wiring Systems AGENCY: Federal Aviation Administration, DOT...'s F2799-09 Standard Practice for Maintenance of Airplane Electrical Wiring Systems (Standard Practice) as an acceptable means of compliance to 14 CFR part 23 sections concerning electrical wiring...

  13. Standard-B Hydrogen Monitoring System, system design description

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1995-01-01

    During most of the year, it is assumed that the vapor in the 177 radioactive waste tanks on the Hanford Project site contain a uniform mixture of gases. Several of these waste tanks (currently twenty five, 6 Double Shell Tanks and 19 Single Shell Tanks) were identified as having the potential for the buildup of gases to a flammable level. An active ventilation system in the Double Shell Tanks and a passive ventilation system in the Single Shell Tanks provides a method of expelling gases from the tanks. A gas release from a tank causes a temporary rise in the tank pressure, and a potential for increased concentration of hydrogen gas in the vapor space. The gas is released via the ventilation systems until a uniform gas mixture in the vapor space is once again achieved. This document describes the design of the Standard-B Hydrogen Monitoring System, (SHMS) and its components as it differs from the original SHMS. The differences are derived from changes made to improve the system performance but not implemented in all the installed enclosures

  14. Development of standard design licensing system of nuclear power plants

    International Nuclear Information System (INIS)

    Lee, S. K.; Yun, Y. K.; Kim, W. S.; Lee, J. H.; Baek, M.

    2001-01-01

    The design of the APR 1400 (Advanced Power Reactor 1400) is being developed based on the concept of a standard design so that the APR 1400 can be constructed repetitively without major design change. Therefore, in order to avoid repetitive licensing review for the portion of the standard design of the APR 1400, it is necessary to introduced a new licensing system for a standard design. Since the Korean government has acknowledged this necessity, it is now pursuing the legislation of a standard design licensing system. In this technical report, procedural requirements and the format and contents of licensing basis documents considered for the adaption of a standard design licensing system are introduced

  15. System Design for Navy Occupational Standards Development

    Science.gov (United States)

    2014-07-01

    need to increase access and visibility, reduce errors and approval times, institute administrative metrics, and standardize the occupational...considerable effort is devoted to ensuring that the grammatical style and form of tasks are consistent across tasks and among other rating OCCSTDs. Once the...reduced overhead and 12 complexity when writing queries for reports. This encapsulation of the data store also increases the portability and

  16. 14 CFR 1260.121 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Standards for financial management systems... Requirements § 1260.121 Standards for financial management systems. (a) Recipients shall relate financial data...) Recipients' financial management systems shall provide for the following. (1) Accurate, current and complete...

  17. 7 CFR 3019.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Standards for financial management systems. 3019.21... Requirements Financial and Program Management § 3019.21 Standards for financial management systems. (a) Federal... cost information whenever practical. (b) Recipients' financial management systems shall provide for the...

  18. 22 CFR 145.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Standards for financial management systems. 145... Financial and Program Management § 145.21 Standards for financial management systems. (a) The Department... whenever practical. (b) Recipients' financial management systems shall provide for the following. (1...

  19. 32 CFR 32.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Standards for financial management systems. 32... Program Management § 32.21 Standards for financial management systems. (a) DoD Components shall require... unit cost information. (b) Recipients' financial management systems shall provide for the following. (1...

  20. 49 CFR 19.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Standards for financial management systems. 19.21... ORGANIZATIONS Post-Award Requirements § 19.21 Standards for financial management systems. (a) Federal awarding... information whenever practical. (b) Recipients' financial management systems shall provide for the following...

  1. 2 CFR 215.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 2 Grants and Agreements 1 2010-01-01 2010-01-01 false Standards for financial management systems... Financial and Program Management § 215.21 Standards for financial management systems. (a) Federal awarding... information whenever practical. (b) Recipients' financial management systems shall provide for the following...

  2. 43 CFR 12.921 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Standards for financial management systems... Organizations Post-Award Requirements § 12.921 Standards for financial management systems. (a) Federal awarding... information whenever practical. (b) Recipients' financial management systems shall provide for the following...

  3. 34 CFR 74.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Standards for financial management systems. 74.21... Requirements Financial and Program Management § 74.21 Standards for financial management systems. (a... practical. (b) Recipients' financial management systems shall provide for the following: (1) Accurate...

  4. 29 CFR 95.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Standards for financial management systems. 95.21 Section 95... Requirements Financial and Program Management § 95.21 Standards for financial management systems. (a... practical. (b) Recipients' financial management systems shall provide for the following: (1) Accurate...

  5. Gold Standard Testing of Motion Based Tracking Systems

    Science.gov (United States)

    2017-03-15

    AFRL-RH-WP-TR-2017-0032 GOLD STANDARD TESTING OF MOTION BASED TRACKING SYSTEMS Joshua Hagen Human Signatures Branch Human-Centered ISR Division...DD-MM-YY) 2. REPORT TYPE 3. DATES COVERED (From - To) 15 03 17 Interim Report June 2016 – March 2017 4. TITLE AND SUBTITLE Gold Standard Testing of...systems against a ‘ Gold Standard ’ on-field measurement system for human physiological performance monitoring. Data shows that the accuracy of the

  6. The System 80+ Standard Plant Information Management System

    International Nuclear Information System (INIS)

    Turk, R.S.; Bryan, R.E.

    1998-01-01

    Historically, electric nuclear power plant owners, following the completion of construction and startup, have been left with a mountain of hard-copy documents and drawings. Hundreds of thousands of hours are spent searching for relevant documents and, in most cases, the documents found require many other documents and drawings to fully understand the design basis. All too often the information is incomplete, and eventually becomes obsolete. In the U.S., utilities spend millions of dollars to discover design basis information and update as-built data for each plant. This information must then be stored in an easily accessed usable form to assist satisfy regulatory requirements and to improve plant operating efficiency. ABB Combustion Engineering Nuclear Systems (ABB-CE) has an active program to develop a state-of-the-art Plant Information Management System (IMS) for its advanced light water reactor, the System 80+TM Standard Plant Design. This program is supported by ABB's Product Data Management (PDM) and Computer Aided Engineering (CAE) efforts world wide. This paper describes the System 80+ plant IMS and how it will be used during the entire life cycle of the plant. (author)

  7. The System 80+ Standard Plant Information Management System

    Energy Technology Data Exchange (ETDEWEB)

    Turk, R.S.; Bryan, R.E. [ABB Combuions Engineering Nuclear Systems (United States)

    1998-07-01

    Historically, electric nuclear power plant owners, following the completion of construction and startup, have been left with a mountain of hard-copy documents and drawings. Hundreds of thousands of hours are spent searching for relevant documents and, in most cases, the documents found require many other documents and drawings to fully understand the design basis. All too often the information is incomplete, and eventually becomes obsolete. In the U.S., utilities spend millions of dollars to discover design basis information and update as-built data for each plant. This information must then be stored in an easily accessed usable form to assist satisfy regulatory requirements and to improve plant operating efficiency. ABB Combustion Engineering Nuclear Systems (ABB-CE) has an active program to develop a state-of-the-art Plant Information Management System (IMS) for its advanced light water reactor, the System 80+TM Standard Plant Design. This program is supported by ABB's Product Data Management (PDM) and Computer Aided Engineering (CAE) efforts world wide. This paper describes the System 80+ plant IMS and how it will be used during the entire life cycle of the plant. (author)

  8. 76 FR 16277 - System Restoration Reliability Standards

    Science.gov (United States)

    2011-03-23

    ... Planning), EOP-005-2 (System Restoration from Blackstart Resources), and EOP-006-2 (System Restoration Coordination) as well as the definition of the term ``Blackstart Resource'' submitted to the Commission for..., generation operators, and certain transmission owners and distribution providers to ensure that plans...

  9. Standard monitoring system for domestic heat pumps

    NARCIS (Netherlands)

    Geelen, C.P.J.M.; Oostendorp, P.A.

    1999-01-01

    In the years to come many domestic heat pump systems are to be installed in the Netherlands. The Dutch agency for energy and environment, NOVEM, and the association of energy utility companies, EnergieNed, give high priority to the monitoring of heat pump systems. The results of the projects,

  10. System 80+trademark Standard Design: CESSAR design certification. Volume 8

    International Nuclear Information System (INIS)

    1997-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume contains Chapter 7 -- Instrumentation and Controls. Topics covered are: reactor protection system; engineered safety feature actuation systems; systems required for safe shutdown; safety-related display instrumentation; all other instrumentation for safety; and control systems not required for safety. Appendix 7A is included

  11. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80 + trademark Standard Design. This volume 8 provides a description of instrumentation and controls

  12. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 18 provides Appendix B, Probabilistic Risk Assessment

  13. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 17 provides Appendix A of this report, closure of unresolved and Genetic Safety Issues

  14. System 80+trademark Standard Design: CESSAR design certification

    International Nuclear Information System (INIS)

    1990-01-01

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+trademark Standard Design. This Volume 16 details the application of Human Factors Engineering in the design process

  15. Process Control System Cyber Security Standards - An Overview

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans; V Stanley Scown; Rolf Carlson; Shabbir Shamsuddin; George Shaw; Jeff Dagle; Paul W Oman; Jeannine Schmidt

    2005-10-01

    The use of cyber security standards can greatly assist in the protection of critical infrastructure by providing guidelines and requisite imperatives in the implementation of computer-controlled systems. These standards are most effective when the engineers and operators using the standards understand what each of the standards addresses and does not address. This paper provides a review and comparison of ten documents dealing with control system cyber security. It is not meant to be a complete treatment of all applicable standards; rather, this is an exemplary analysis showing the benefits of comparing and contrasting differing documents.

  16. Hearing Aid–Related Standards and Test Systems

    Science.gov (United States)

    Ravn, Gert; Preves, David

    2015-01-01

    Many documents describe standardized methods and standard equipment requirements in the field of audiology and hearing aids. These standards will ensure a uniform level and a high quality of both the methods and equipment used in audiological work. The standards create the basis for measuring performance in a reproducible manner and independent from how and when and by whom parameters have been measured. This article explains, and focuses on, relevant acoustic and electromagnetic compatibility parameters and describes several test systems available. PMID:27516709

  17. Progress in standardization for ITER Remote Handling control system

    Energy Technology Data Exchange (ETDEWEB)

    Hamilton, David Thomas, E-mail: david.hamilton@iter.org [ITER Organization, Route de Vinon, 13115 St. Paul-lez-Durance (France); Tesini, Alessandro [ITER Organization, Route de Vinon, 13115 St. Paul-lez-Durance (France); Ranz, Roberto [Fusion for Energy, Torres Diagonal Litoral B3, Josep Pla 2, 08019 Barcelona (Spain); Kozaka, Hiroshi [Japan Atomic Energy Agency, Fusion Research and Development Directorate, Naka, Ibaraki-ken 311-0193 (Japan)

    2014-10-15

    Graphical abstract: - Highlights: • Standard parts specified for ITER Remote Handling (RH) control system. • Standard approach for VR modeling of structural deformations in real-time. • RH Core System produced as standard platform for RH controller applications. • Synthetic Viewing investigated and demonstrated. • Structured language defined for RH operation procedures and motion sequences. - Abstract: An integrated control system architecture has been defined for the ITER Remote Handling (RH) equipment systems, and work has been continuing to develop and validate standards for this architecture. Evaluations of standard parts and a standard control room work-cell have contributed to an update of the RH Control System Design Handbook, while R and D activities have been carried out to validate concepts for standard solutions to ITER RH problems: the use of a standard master arm with different slave arms, the achievement of high accuracy tracking of RH operations within virtual reality, and condition monitoring of RH equipment systems. The standardization efforts have been consolidated through the development of a freely distributable software platform to support the adoption of the ITER RH standards. The RH Core System installs on top of the CODAC Core System and provides the basic platform for the development of ITER RH equipment controller applications. The standardization work has continued in the areas of RH viewing, network communication protocols, and a structured language for programming ITER RH operations. Prototyping has been done on high-level control system applications, and R and D has been carried out in the area of synthetic viewing for ITER RH. These developments will be reflected in a new version of the RH Core System to be produced during 2013.

  18. A Standard System to Study Vertebrate Embryos

    Science.gov (United States)

    Werneburg, Ingmar

    2009-01-01

    Staged embryonic series are important as reference for different kinds of biological studies. I summarise problems that occur when using ‘staging tables’ of ‘model organisms’. Investigations of developmental processes in a broad scope of taxa are becoming commonplace. Beginning in the 1990s, methods were developed to quantify and analyse developmental events in a phylogenetic framework. The algorithms associated with these methods are still under development, mainly due to difficulties of using non-independent characters. Nevertheless, the principle of comparing clearly defined newly occurring morphological features in development (events) in quantifying analyses was a key innovation for comparative embryonic research. Up to date no standard was set for how to define such events in a comparative approach. As a case study I compared the external development of 23 land vertebrate species with a focus on turtles, mainly based on reference staging tables. I excluded all the characters that are only identical for a particular species or general features that were only analysed in a few species. Based on these comparisons I defined 104 developmental characters that are common either for all vertebrates (61 characters), gnathostomes (26), tetrapods (3), amniotes (7), or only for sauropsids (7). Characters concern the neural tube, somite, ear, eye, limb, maxillary and mandibular process, pharyngeal arch, eyelid or carapace development. I present an illustrated guide listing all the defined events. This guide can be used for describing developmental series of any vertebrate species or for documenting specimen variability of a particular species. The guide incorporates drawings and photographs as well as consideration of species identifying developmental features such as colouration. The simple character-code of the guide is extendable to further characters pertaining to external and internal morphological, physiological, genetic or molecular development, and also

  19. A standard system to study vertebrate embryos.

    Directory of Open Access Journals (Sweden)

    Ingmar Werneburg

    2009-06-01

    Full Text Available Staged embryonic series are important as reference for different kinds of biological studies. I summarise problems that occur when using 'staging tables' of 'model organisms'. Investigations of developmental processes in a broad scope of taxa are becoming commonplace. Beginning in the 1990s, methods were developed to quantify and analyse developmental events in a phylogenetic framework. The algorithms associated with these methods are still under development, mainly due to difficulties of using non-independent characters. Nevertheless, the principle of comparing clearly defined newly occurring morphological features in development (events in quantifying analyses was a key innovation for comparative embryonic research. Up to date no standard was set for how to define such events in a comparative approach. As a case study I compared the external development of 23 land vertebrate species with a focus on turtles, mainly based on reference staging tables. I excluded all the characters that are only identical for a particular species or general features that were only analysed in a few species. Based on these comparisons I defined 104 developmental characters that are common either for all vertebrates (61 characters, gnathostomes (26, tetrapods (3, amniotes (7, or only for sauropsids (7. Characters concern the neural tube, somite, ear, eye, limb, maxillary and mandibular process, pharyngeal arch, eyelid or carapace development. I present an illustrated guide listing all the defined events. This guide can be used for describing developmental series of any vertebrate species or for documenting specimen variability of a particular species. The guide incorporates drawings and photographs as well as consideration of species identifying developmental features such as colouration. The simple character-code of the guide is extendable to further characters pertaining to external and internal morphological, physiological, genetic or molecular development, and

  20. 45 CFR 2543.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Standards for financial management systems. 2543... OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management § 2543.21 Standards for financial management systems. (a) Federal awarding agencies shall require recipients to relate...

  1. 32 CFR 34.11 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Standards for financial management systems. 34... ORGANIZATIONS Post-award Requirements Financial and Program Management § 34.11 Standards for financial management systems. (a) Recipients shall be allowed and encouraged to use existing financial management...

  2. 24 CFR 84.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 24 Housing and Urban Development 1 2010-04-01 2010-04-01 false Standards for financial management... and Program Management § 84.21 Standards for financial management systems. (a) HUD shall require.... (b) Recipients' financial management systems shall provide for the following: (1) Accurate, current...

  3. 7 CFR 550.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 6 2010-01-01 2010-01-01 false Standards for financial management systems. 550.20... Management of Agreements Financial Management § 550.20 Standards for financial management systems. (a) REE agencies shall require Cooperators to relate financial data to performance data. (b) Cooperators' financial...

  4. 36 CFR 1210.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... Program Management § 1210.21 Standards for financial management systems. (a) The NHPRC shall require.... (b) Recipients' financial management systems shall provide for the following. (1) Accurate, current... 36 Parks, Forests, and Public Property 3 2010-07-01 2010-07-01 false Standards for financial...

  5. 38 CFR 49.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... Program Management § 49.21 Standards for financial management systems. (a) Federal awarding agencies shall... practical. (b) Recipients' financial management systems shall provide for the following. (1) Accurate... 38 Pensions, Bonuses, and Veterans' Relief 2 2010-07-01 2010-07-01 false Standards for financial...

  6. 22 CFR 518.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 2 2010-04-01 2010-04-01 true Standards for financial management systems. 518... ORGANIZATIONS Post-Award Requirements Financial and Program Management § 518.21 Standards for financial management systems. (a) Federal awarding agencies shall require recipients to relate financial data to...

  7. 40 CFR 30.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 1 2010-07-01 2010-07-01 false Standards for financial management... Program Management § 30.21 Standards for financial management systems. (a) EPA shall require recipients to...) Recipients' financial management systems shall provide for the following. (1) Accurate, current and complete...

  8. 29 CFR 1470.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 4 2010-07-01 2010-07-01 false Standards for financial management systems. 1470.20 Section... Post-Award Requirements Financial Administration § 1470.20 Standards for financial management systems... expending and accounting for its own funds. Fiscal control and accounting procedures of the State, as well...

  9. 20 CFR 437.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 20 Employees' Benefits 2 2010-04-01 2010-04-01 false Standards for financial management systems... Financial Administration § 437.20 Standards for financial management systems. (a) A State must expend and... own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost...

  10. 34 CFR 80.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 34 Education 1 2010-07-01 2010-07-01 false Standards for financial management systems. 80.20... Financial Administration § 80.20 Standards for financial management systems. (a) A State must expand and... own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost...

  11. 29 CFR 97.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 1 2010-07-01 2010-07-01 true Standards for financial management systems. 97.20 Section 97... Standards for financial management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and...

  12. 45 CFR 92.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 1 2010-10-01 2010-10-01 false Standards for financial management systems. 92.20...-Award Requirements Financial Administration § 92.20 Standards for financial management systems. (a) A... and accounting for its own funds. Fiscal control and accounting procedures of the State, as well as...

  13. 45 CFR 1174.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Standards for financial management systems. 1174... Financial Administration § 1174.20 Standards for financial management systems. (a) A State must expand and... own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost...

  14. 7 CFR 3016.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 15 2010-01-01 2010-01-01 false Standards for financial management systems. 3016.20... Standards for financial management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and...

  15. 45 CFR 1157.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Standards for financial management systems. 1157... Administration § 1157.20 Standards for financial management systems. (a) A State must expand and account for.... Fiscal control and accounting procedures of the State, as well as its subgrantees and cost-type...

  16. 45 CFR 1183.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Standards for financial management systems. 1183... Financial Administration § 1183.20 Standards for financial management systems. (a) A State must expand and... own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost...

  17. 45 CFR 602.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 3 2010-10-01 2010-10-01 false Standards for financial management systems. 602.20... GOVERNMENTS Post-Award Requirements § 602.20 Standards for financial management systems. (a) A State must... accounting for its own funds. Fiscal control and accounting procedures of the State, as well as its...

  18. 49 CFR 18.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 1 2010-10-01 2010-10-01 false Standards for financial management systems. 18.20... Administration § 18.20 Standards for financial management systems. (a) A State must expand and account for grant.... Fiscal control and accounting procedures of the State, as well as its subgrantees and cost-type...

  19. 10 CFR 600.220 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Standards for financial management systems. 600.220... Post-Award Requirements § 600.220 Standards for financial management systems. (a) A State must expend... for its own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees...

  20. 21 CFR 1403.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 9 2010-04-01 2010-04-01 false Standards for financial management systems. 1403... Financial Administration § 1403.20 Standards for financial management systems. (a) A State must expend and... own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost...

  1. 22 CFR 135.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 22 Foreign Relations 1 2010-04-01 2010-04-01 false Standards for financial management systems. 135... Financial Administration § 135.20 Standards for financial management systems. (a) A State must expand and... own funds. Fiscal control and accounting procedures of the State, as well as its subgrantees and cost...

  2. 14 CFR 1273.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 14 Aeronautics and Space 5 2010-01-01 2010-01-01 false Standards for financial management systems... Requirements Financial Administration § 1273.20 Standards for financial management systems. (a) A State must... accounting for its own funds. Fiscal control and accounting procedures of the State, as well as its...

  3. 46 CFR 154.1305 - Liquid level gauging system: Standards.

    Science.gov (United States)

    2010-10-01

    ... at least one liquid level gauging system that is operable: (1) At pressures up to, and including, the... 46 Shipping 5 2010-10-01 2010-10-01 false Liquid level gauging system: Standards. 154.1305 Section... CARGOES SAFETY STANDARDS FOR SELF-PROPELLED VESSELS CARRYING BULK LIQUEFIED GASES Design, Construction and...

  4. 43 CFR 12.60 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 43 Public Lands: Interior 1 2010-10-01 2010-10-01 false Standards for financial management systems... AUDIT REQUIREMENTS AND COST PRINCIPLES FOR ASSISTANCE PROGRAMS Uniform Administrative Requirements for... Standards for financial management systems. (a) A State must expand and account for grant funds in...

  5. Emerging standards with application to accelerator safety systems

    International Nuclear Information System (INIS)

    Mahoney, K.L.; Robertson, H.P.

    1997-01-01

    This paper addresses international standards which can be applied to the requirements for accelerator personnel safety systems. Particular emphasis is given to standards which specify requirements for safety interlock systems which employ programmable electronic subsystems. The work draws on methodologies currently under development for the medical, process control, and nuclear industries

  6. NASA's Standards Process for Earth Science Data Systems (Invited)

    Science.gov (United States)

    Ullman, R.; Enloe, Y.

    2009-12-01

    NASA’s Standards Process Group (SPG) facilitates the recommendation of proposed standards that have proven implementation and operational benefit for use in NASA’s Earth science data systems and also reviews and endorses different types of best practices and implementation experiences as Technical Notes. After some initial experience in approving proposed standards, the SPG has tailored its Standards Process to remove redundant reviews to shorten the review process and to improve the Standards Process. The Standards Process can accelerate the evolution of practices through better communication from successful practice in a specific community to broader community adoption to community-recognized standards. We note the contrast to other international standards organizations that develop standards instead of adopting already developed practices. For each endorsed standard, the availability of high quality documentation for the standard, available reusable software, and information about successful operational experience with the use of the standard will help bridge the chasm from innovative use by visionary practitioners to more popular use by pragmatic users. We will discuss real examples of the different types of candidate standards, best practices and implementation experiences that have been documented, proposed and endorsed. We will also discuss future directions for the NASA Standards Process as it applies to NASA’s planned Decadal Survey missions.

  7. Cloud Computing for Standard ERP Systems

    DEFF Research Database (Denmark)

    Schubert, Petra; Adisa, Femi

    Cloud Computing is a topic that has gained momentum in the last years. Current studies show that an increasing number of companies is evaluating the promised advantages and considering making use of cloud services. In this paper we investigate the phenomenon of cloud computing and its importance...... for the operation of ERP systems. We argue that the phenomenon of cloud computing could lead to a decisive change in the way business software is deployed in companies. Our reference framework contains three levels (IaaS, PaaS, SaaS) and clarifies the meaning of public, private and hybrid clouds. The three levels...... of cloud computing and their impact on ERP systems operation are discussed. From the literature we identify areas for future research and propose a research agenda....

  8. Test System for Standard ALICE DCS Components

    CERN Document Server

    AUTHOR|(CDS)2160773

    2016-01-01

    Currently, the ALICE DCS project is supervising equipment installed in the ALICE experiment site at CERN. Hence, the aim of this project was to provide a test bench in the DCS lab, where a real equipment and software tools will be deployed. Using this test bench, test procedures which exercise the devices under the test in a configurable way and provide logging and trending of the acquired data were implemented. The setup was devised using the ALICE software framework and Siemens SCADA system WINCC OA, providing the same functionality as the systems installed in ALICE, and will be used for the commissioning of the new software and hardware, burn-in tests of new modules and log-term stability tests of ALICE hardware.

  9. In vitro systems: standardization of endpoints

    International Nuclear Information System (INIS)

    Dewey, W.C.

    1979-01-01

    Principles are discussed for utilizing cell culture systems to assay for interactions between drugs and radiation. Emphasis is based on the necessity of using synchronous cultures to determine whether the interaction is independent, additive, or synergistic, and to determine the effect of drugs on recovery from sublethal x-ray damage (SLD). Furthermore, in studies of drug effects on SLD, adequate controls must be included to distinguish between effects associated with the interaction of 2 x-ray doses and the effects associated with interaction of a second x-ray dose with prior drug exposure. Finally, different methods of expressing drug exposure are reviewed, and associated problems related to predicting in vivo effects from in vitro results are mentioned

  10. Help for the Developers of Control System Cyber Security Standards

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2008-05-01

    A Catalog of Control Systems Security: Recommendations for Standards Developers (Catalog), aimed at assisting organizations to facilitate the development and implementation of control system cyber security standards, has been developed. This catalog contains requirements that can help protect control systems from cyber attacks and can be applied to the Critical Infrastructures and Key Resources of the United States and other nations. The requirements contained in the catalog are a compilation of practices or various industry bodies used to increase the security of control systems from both physical and cyber attacks. They should be viewed as a collection of recommendations to be considered and judiciously employed, as appropriate, when reviewing and developing cyber security standards for control systems. The recommendations in the Catalog are intended to be broad enough to provide any industry using control systems the flexibility needed to develop sound cyber security standards specific to their individual security requirements.

  11. 40 CFR 35.6270 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... § 35.6270 Standards for financial management systems. (a) Accounting system standards—(1) General. The... Agreement. (6) Accounting system control procedures. Except as provided for in paragraph (a)(3) of this section, accounting system control procedures must ensure that accounting information is: (i) Accurate...

  12. Reliability Standards of Complex Engineering Systems

    Science.gov (United States)

    Galperin, E. M.; Zayko, V. A.; Gorshkalev, P. A.

    2017-11-01

    Production and manufacture play an important role in today’s modern society. Industrial production is nowadays characterized by increased and complex communications between its parts. The problem of preventing accidents in a large industrial enterprise becomes especially relevant. In these circumstances, the reliability of enterprise functioning is of particular importance. Potential damage caused by an accident at such enterprise may lead to substantial material losses and, in some cases, can even cause a loss of human lives. That is why industrial enterprise functioning reliability is immensely important. In terms of their reliability, industrial facilities (objects) are divided into simple and complex. Simple objects are characterized by only two conditions: operable and non-operable. A complex object exists in more than two conditions. The main characteristic here is the stability of its operation. This paper develops the reliability indicator combining the set theory methodology and a state space method. Both are widely used to analyze dynamically developing probability processes. The research also introduces a set of reliability indicators for complex technical systems.

  13. Management system - correlation study between new IAEA standards and the market standards

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Dirceu Paulo de [Centro Tecnologico da Marinha em Sao Paulo (CTMSP), Ipero, SP (Brazil)], e-mail: dirceupo@hotmail.com; Zouain, Desiree Moraes [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: dmzouain@ipen.br

    2009-07-01

    In order to answer the growing concern of society with respect of the aspects that affect the quality of life, international and national regulatory bodies have developed standards that enable organizations to establish management systems for quality, environment and sustainable development, health, safety and social responsibility, among other functions. Within this context it is necessary to structure an integrated management system that promotes interests compatibility of several distinct and complementary functions involved. Considering this vision of the management system integration, the International Atomic Energy Agency (IAEA) decided to review the structure of safety standards on Quality Assurance - code and guides 50-C/SGQ1/ 14:1996, publishing, in 2006, IAEA GS-R-3 and IAEA GS-G-3.1 standards, enlarging the management approach of the previous standards, including the possibility of integrating the functions foremost mentioned. This paper presents the results about a correlation study between IAEA management system standards - IAEA GS-R-3: 2006, IAEA GS-G-3.1: 2006 and IAEA DS349 rev. 2007, this latter still a draft standard, with those market management system standards on quality - ISO 9001:2008, environmental - ISO 14001:2004, and occupational health and safety - BS OHSAS 18001:2007, identifying gaps, redundancies and complementarities among their requirements and guidances. The purpose of the study is to provide subsidies that could contribute to the structuring of a management system to nuclear facilities that satisfies, in an integrated manner, the common and complementary requirements and guidances of IAEA and market standards. (author)

  14. Management system - correlation study between new IAEA standards and the market standards

    International Nuclear Information System (INIS)

    Oliveira, Dirceu Paulo de; Zouain, Desiree Moraes

    2009-01-01

    In order to answer the growing concern of society with respect of the aspects that affect the quality of life, international and national regulatory bodies have developed standards that enable organizations to establish management systems for quality, environment and sustainable development, health, safety and social responsibility, among other functions. Within this context it is necessary to structure an integrated management system that promotes interests compatibility of several distinct and complementary functions involved. Considering this vision of the management system integration, the International Atomic Energy Agency (IAEA) decided to review the structure of safety standards on Quality Assurance - code and guides 50-C/SGQ1/ 14:1996, publishing, in 2006, IAEA GS-R-3 and IAEA GS-G-3.1 standards, enlarging the management approach of the previous standards, including the possibility of integrating the functions foremost mentioned. This paper presents the results about a correlation study between IAEA management system standards - IAEA GS-R-3: 2006, IAEA GS-G-3.1: 2006 and IAEA DS349 rev. 2007, this latter still a draft standard, with those market management system standards on quality - ISO 9001:2008, environmental - ISO 14001:2004, and occupational health and safety - BS OHSAS 18001:2007, identifying gaps, redundancies and complementarities among their requirements and guidances. The purpose of the study is to provide subsidies that could contribute to the structuring of a management system to nuclear facilities that satisfies, in an integrated manner, the common and complementary requirements and guidances of IAEA and market standards. (author)

  15. Specifications of Standards in Systems and Synthetic Biology.

    Science.gov (United States)

    Schreiber, Falk; Bader, Gary D; Golebiewski, Martin; Hucka, Michael; Kormeier, Benjamin; Le Novère, Nicolas; Myers, Chris; Nickerson, David; Sommer, Björn; Waltemath, Dagmar; Weise, Stephan

    2015-09-04

    Standards shape our everyday life. From nuts and bolts to electronic devices and technological processes, standardised products and processes are all around us. Standards have technological and economic benefits, such as making information exchange, production, and services more efficient. However, novel, innovative areas often either lack proper standards, or documents about standards in these areas are not available from a centralised platform or formal body (such as the International Standardisation Organisation). Systems and synthetic biology is a relatively novel area, and it is only in the last decade that the standardisation of data, information, and models related to systems and synthetic biology has become a community-wide effort. Several open standards have been established and are under continuous development as a community initiative. COMBINE, the ‘COmputational Modeling in BIology’ NEtwork has been established as an umbrella initiative to coordinate and promote the development of the various community standards and formats for computational models. There are yearly two meeting, HARMONY (Hackathons on Resources for Modeling in Biology), Hackathon-type meetings with a focus on development of the support for standards, and COMBINE forums, workshop-style events with oral presentations, discussion, poster, and breakout sessions for further developing the standards. For more information see http://co.mbine.org/. So far the different standards were published and made accessible through the standards’ web- pages or preprint services. The aim of this special issue is to provide a single, easily accessible and citable platform for the publication of standards in systems and synthetic biology. This special issue is intended to serve as a central access point to standards and related initiatives in systems and synthetic biology, it will be published annually to provide an opportunity for standard development groups to communicate updated specifications.

  16. Heterogeneous information network model for equipment-standard system

    Science.gov (United States)

    Yin, Liang; Shi, Li-Chen; Zhao, Jun-Yan; Du, Song-Yang; Xie, Wen-Bo; Yuan, Fei; Chen, Duan-Bing

    2018-01-01

    Entity information network is used to describe structural relationships between entities. Taking advantage of its extension and heterogeneity, entity information network is more and more widely applied to relationship modeling. Recent years, lots of researches about entity information network modeling have been proposed, while seldom of them concentrate on equipment-standard system with properties of multi-layer, multi-dimension and multi-scale. In order to efficiently deal with some complex issues in equipment-standard system such as standard revising, standard controlling, and production designing, a heterogeneous information network model for equipment-standard system is proposed in this paper. Three types of entities and six types of relationships are considered in the proposed model. Correspondingly, several different similarity-measuring methods are used in the modeling process. The experiments show that the heterogeneous information network model established in this paper can reflect relationships between entities accurately. Meanwhile, the modeling process has a good performance on time consumption.

  17. 15 CFR 14.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Standards for financial management...-PROFIT, AND COMMERCIAL ORGANIZATIONS Post-Award Requirements Financial and Program Management § 14.21 Standards for financial management systems. (a) The Grants Officer shall require recipients to relate...

  18. 28 CFR 70.21 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 28 Judicial Administration 2 2010-07-01 2010-07-01 false Standards for financial management..., HOSPITALS AND OTHER NON-PROFIT ORGANIZATIONS Post-Award Requirements Financial and Program Management § 70.21 Standards for financial management systems. (a) Recipients must relate financial data to...

  19. System 80+trademark Standard Design: CESSAR design certification. Volume 25

    International Nuclear Information System (INIS)

    1997-01-01

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. This document describes the Combustion Engineering, Inc. System 80+trademark Standard Design. This volume contains sections 12 thru 16 of Chapter 19 -- Probabilistic Risk Assessment. Topics covered are: containment response analysis; consequence analysis; containment response and consequence analysis sensitivity analysis; summary and conclusions; and references

  20. 10 CFR 600.121 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... 10 Energy 4 2010-01-01 2010-01-01 false Standards for financial management systems. 600.121... financial management systems. (a) Recipients shall relate financial data to performance data and develop....121(f) and 600.181, recipients' financial management systems shall provide for the following: (1...

  1. Open Architecture, Standards and Information Systems (OASIS) for ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Open Architecture, Standards and Information Systems (OASIS) for Healthcare in Africa. This project will help African countries develop and maintain low-cost sustainable health information systems, and use the information systems to address health issues at both the facility and the public health level. It will do so by ...

  2. Patterns in Standards and Technologies for Economic Information Systems Interoperability

    Directory of Open Access Journals (Sweden)

    Vasile Irimia

    2012-06-01

    Full Text Available This paper presets results from a review of the current standards used for collaboration between economic information systems, including web services and service oriented architecture, EDI, ebXML framework, RosettaNet framework, cXML, xCBL UBL, BPMN, BPEL, WS-CDL, ASN.1, and others. Standards have a key role in promoting economic information system interoperability, and thus enable collaboration. Analyzing the current standards, technologies and applications used for economic information systems interoperability has revealed a common pattern that runs through all of them. From this pattern we construct a basic model of interoperability around which we relate and judge all standards, technologies and applications for economic information systems interoperability.

  3. Standard-Cell, Open-Architecture Power Conversion Systems

    National Research Council Canada - National Science Library

    Boroyevich, D; Wang, F; Lee, F. C; Odendaal, W. G; Edwards, S

    2005-01-01

    ...). This project was purposefully aimed to develop a standardized hierarchical design and analysis methodology for modular power electronics conversion systems using as basis the ISO/OSI seven-layer reference model...

  4. EMI/EMC standards for PFBR instrumentation and control systems

    International Nuclear Information System (INIS)

    Krishnakumar, B.; Sundararajan, M.K.; Ilango Sambasivan, S.; Sivaramakrishna, M.

    2005-01-01

    Electromagnetic Interference and Electromagnetic compatibility (EMI/EMC) is one of the major issues to be addressed in the design, development, installation commissioning and maintenance of electronic systems in the Nuclear Power Plant (NPP). That calls for a proper EMI/EMC standard to be adhered to. This paper recommends a standard to be followed for PFBR instrumentation and control (I and C) systems. (author)

  5. Communication Standards Suitable for MES Systems Designed for SMES

    Directory of Open Access Journals (Sweden)

    Ondřej WINKLER

    2009-06-01

    Full Text Available A MES (Manufacturing Execution System is a system that large companies use to measure or control critical production activities. Individual parts of this system can be used as a model for development of tools suitable for small and medium enterprises (SMEs. It can demonstrate how manufacturing systems works and which communication standards are usable. The communication standards enable data acquisition, data processing, storing and their conversion for any production report. Furthermore, interfaces for web clients allow displaying the raw or transformed data as a text or a graphic chart. The development of tools for an access to the data retrieved from MES software is described in this paper.

  6. The System 80+ Standard Plant design control document. Volume 11

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume covers parts 6 and 7 and appendix 7A for section 7 (Instrumentation and Control) of the ADM Design and Analysis. The topics covered by these are: other systems required for safety; control systems not required by safety; and CMF evaluation of limiting faults. Parts 1--3 of section 8 (Electric Power) of the ADM are also included in this volume. Topics covered by these parts are: introduction; offsite power system; and onsite power system

  7. Organizing Community-Based Data Standards: Lessons from Developing a Successful Open Standard in Systems Biology

    Science.gov (United States)

    Hucka, M.

    2015-09-01

    In common with many fields, including astronomy, a vast number of software tools for computational modeling and simulation are available today in systems biology. This wealth of resources is a boon to researchers, but it also presents interoperability problems. Despite working with different software tools, researchers want to disseminate their work widely as well as reuse and extend the models of other researchers. This situation led in the year 2000 to an effort to create a tool-independent, machine-readable file format for representing models: SBML, the Systems Biology Markup Language. SBML has since become the de facto standard for its purpose. Its success and general approach has inspired and influenced other community-oriented standardization efforts in systems biology. Open standards are essential for the progress of science in all fields, but it is often difficult for academic researchers to organize successful community-based standards. I draw on personal experiences from the development of SBML and summarize some of the lessons learned, in the hope that this may be useful to other groups seeking to develop open standards in a community-oriented fashion.

  8. The System 80+ Standard Plant design control document. Volume 23

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains part 16 References and Appendix 19 A Design Alternatives for section 19 (Probabilistic Risk Assessment) of the ADM Design and Analysis. Also covered is section 20 Unresolved Safety Issues of the ADM Design and Analysis. Finally sections 1--6 of the ADM Emergency Operations Guidelines are contained in this volume. Information covered in these sections include: standard post-trip actions; diagnostic actions; reactor trip recovery guideline; LOCA recovery; SG tube rupture recovery

  9. Value System and Standard of Education in Nigerian Third ...

    African Journals Online (AJOL)

    Nekky Umera

    university education in third generation universities in South-South geopolitical zone. It sought to answer ... Value System and Standard of Education in Nigerian Third Generation Universities... Rogers defined value as the ..... female counterparts with positive value system is upheld as the probability was greater than alpha.

  10. 49 CFR 659.15 - System safety program standard.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 7 2010-10-01 2010-10-01 false System safety program standard. 659.15 Section 659.15 Transportation Other Regulations Relating to Transportation (Continued) FEDERAL TRANSIT ADMINISTRATION, DEPARTMENT OF TRANSPORTATION RAIL FIXED GUIDEWAY SYSTEMS; STATE SAFETY OVERSIGHT Role of the...

  11. 40 CFR 65.113 - Standards: Sampling connection systems.

    Science.gov (United States)

    2010-07-01

    ... systems or facilities: (i) A waste management unit as defined in 40 CFR 63.111, if the waste management... industrial solid waste, if the process fluids are not hazardous waste as defined in 40 CFR part 261; and (5... 40 Protection of Environment 15 2010-07-01 2010-07-01 false Standards: Sampling connection systems...

  12. 44 CFR 13.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... management systems. 13.20 Section 13.20 Emergency Management and Assistance FEDERAL EMERGENCY MANAGEMENT... Standards for financial management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and...

  13. 15 CFR 24.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... Requirements Financial Administration § 24.20 Standards for financial management systems. (a) A State must... accounting for its own funds. Fiscal control and accounting procedures of the State, as well as its... prohibitions of applicable statutes. (b) The financial management systems of other grantees and subgrantees...

  14. 24 CFR 85.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-04-01

    ... Administration § 85.20 Standards for financial management systems. (a) A State must expand and account for grant.... Fiscal control and accounting procedures of the State, as well as its subgrantees and cost-type... statutes. (b) The financial management systems of other grantees and subgrantees must meet the following...

  15. 13 CFR 143.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-01-01

    ... Requirements Financial Administration § 143.20 Standards for financial management systems. (a) A State must... accounting for its own funds. Fiscal control and accounting procedures of the State, as well as its... prohibitions of applicable statutes. (b) The financial management systems of other grantees and subgrantees...

  16. 28 CFR 66.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... Requirements Financial Administration § 66.20 Standards for financial management systems. (a) A State must... accounting for its own funds. Fiscal control and accounting procedures of the State, as well as its... prohibitions of applicable statutes. (b) The financial management systems of other grantees and subgrantees...

  17. 45 CFR 2541.200 - Standards for financial management systems.

    Science.gov (United States)

    2010-10-01

    ... 45 Public Welfare 4 2010-10-01 2010-10-01 false Standards for financial management systems. 2541... for expending and accounting for its own funds. Fiscal control and accounting procedures of the State... violation of the restrictions and prohibitions of applicable statutes. (b) The financial management systems...

  18. 32 CFR 33.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 32 National Defense 1 2010-07-01 2010-07-01 false Standards for financial management systems. 33... financial management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and accounting...

  19. Standard interfaces for program-modular multiprocessor systems

    International Nuclear Information System (INIS)

    Chernykh, E.V.

    1982-01-01

    The peculiarities of the structures of existing and developed standard interfaces used in automation systems for nuclear physical experiments are considered. general structural characteristics of multiprocessor system interfaces are revealed. The comparison of the existing system CAMAC crate and designed standards of COMPEX, E3S and FASTBUS interfaces by capacity and relative cost is carried out. The analysis of the given data shows that operation of any interface is more advantageous at the rates close to capacity values, the relative cost being minimum. In this case the advantage is on the side of interfaces with greater capacity values for which at a moderated decrease of the exchange or requests processing rate the relative costs grow slower. A higher capacity of one-cycle exchange is provided with functional data way specialization in the interface. The conclusion is drawn that most perspective trend in the development of automation systems for high energy physics experiments is using FASTBUS standard

  20. Standard review plan for dry cask storage systems. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-01-01

    The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 {open_quotes}Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Cask{close_quotes} contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed.

  1. Standard review plan for dry cask storage systems. Final report

    International Nuclear Information System (INIS)

    1997-01-01

    The Standard Review Plan (SRP) For Dry Cask Storage Systems provides guidance to the Nuclear Regulatory Commission staff in the Spent Fuel Project Office for performing safety reviews of dry cask storage systems. The SRP is intended to ensure the quality and uniformity of the staff reviews, present a basis for the review scope, and clarification of the regulatory requirements. Part 72, Subpart B generally specifies the information needed in a license application for the independent storage of spent nuclear fuel and high level radioactive waste. Regulatory Guide 3.61 open-quotes Standard Format and Content for a Topical Safety Analysis Report for a Spent Fuel Dry Storage Caskclose quotes contains an outline of the specific information required by the staff. The SRP is divided into 14 sections which reflect the standard application format. Regulatory requirements, staff positions, industry codes and standards, acceptance criteria, and other information are discussed

  2. Understanding information retrieval systems management, types, and standards

    CERN Document Server

    Bates, Marcia J

    2011-01-01

    In order to be effective for their users, information retrieval (IR) systems should be adapted to the specific needs of particular environments. The huge and growing array of types of information retrieval systems in use today is on display in Understanding Information Retrieval Systems: Management, Types, and Standards, which addresses over 20 types of IR systems. These various system types, in turn, present both technical and management challenges, which are also addressed in this volume. In order to be interoperable in a networked environment, IR systems must be able to use various types of

  3. Developing and enforcing internal information systems standards: InduMaker’s Standards Management Process

    Directory of Open Access Journals (Sweden)

    Claudia Loebbecke

    2016-01-01

    Full Text Available It is widely agreed that standards provide numerous benefits when available and enforced. Company-internal Information Systems (IS management procedures and solutions, in the following coined IS ‘standards’, allow for harmonizing operations between company units, locations and even different service providers. However, many companies lack an organized process for defining and managing internal IS standards, which causes uncertainties and delays in decision making, planning, and design processes. In this case study of the globally operating InduMaker (anonymized company name, an established manufacturing supplier, we look into the company-internal management of IS standards. Theoretically grounded in the organizational and IS-focused literature on business process modelling and business process commoditization, we describe and investigate InduMaker’s newly developed Standard Management Process (SMP for defining and managing company-internal business and IS standards, with which the multinational pursues offering clear answers to business and IT departments about existing IS standards, their degree of obligation, applicability, and scope at any time.

  4. Instrumentation Standard Architectures for Future High Availability Control Systems

    International Nuclear Information System (INIS)

    Larsen, R.S.

    2005-01-01

    Architectures for next-generation modular instrumentation standards should aim to meet a requirement of High Availability, or robustness against system failure. This is particularly important for experiments both large and small mounted on production accelerators and light sources. New standards should be based on architectures that (1) are modular in both hardware and software for ease in repair and upgrade; (2) include inherent redundancy at internal module, module assembly and system levels; (3) include modern high speed serial inter-module communications with robust noise-immune protocols; and (4) include highly intelligent diagnostics and board-management subsystems that can predict impending failure and invoke evasive strategies. The simple design principles lead to fail-soft systems that can be applied to any type of electronics system, from modular instruments to large power supplies to pulsed power modulators to entire accelerator systems. The existing standards in use are briefly reviewed and compared against a new commercial standard which suggests a powerful model for future laboratory standard developments. The past successes of undertaking such projects through inter-laboratory engineering-physics collaborations will be briefly summarized

  5. The System 80+ Standard Plant design control document. Volume 20

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains 2 technical specifications bases as part of Appendix 16 A Tech Spec Bases. They are TS B3.8 Electrical Power Technical Systems Bases and TS B3.9 Refueling Operations Bases. All 3 parts of section 17 (QA) and all 10 parts of section 18 (Human Factors) of the ADM Design and Analysis are contained in this volume. Topics covered in section 17 are: design phase QA; operations phase QA; and design phase reliability assurance. Topics covered by section 18 are: design team organization; design goals; design process; functional task analysis; control room configuration; information presentation; control and monitoring; verification and validation; and review documents

  6. The System 80+ Standard Plant design control document. Volume 21

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains parts 1--10 of section 19 (Probabilistic Risk Assessment) of the ADM Design and Analysis. Topics covered are: methodology; initiating event evaluation; accident sequence determination; data analysis; systems analysis; external events analysis; shutdown risk assessment; accident sequence quantification; and sensitivity analysis. Also included in this volume are Appendix 19.8A Shutdown Risk Assessment and Appendix A to Appendix 19.8A Request for Information

  7. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    OpenAIRE

    Sherman, Max H.

    2011-01-01

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outd...

  8. International Metadata Standards and Enterprise Data Quality Metadata Systems

    Science.gov (United States)

    Habermann, Ted

    2016-01-01

    Well-documented data quality is critical in situations where scientists and decision-makers need to combine multiple datasets from different disciplines and collection systems to address scientific questions or difficult decisions. Standardized data quality metadata could be very helpful in these situations. Many efforts at developing data quality standards falter because of the diversity of approaches to measuring and reporting data quality. The one size fits all paradigm does not generally work well in this situation. I will describe these and other capabilities of ISO 19157 with examples of how they are being used to describe data quality across the NASA EOS Enterprise and also compare these approaches with other standards.

  9. Quality assurance: Importance of systems and standard operating procedures

    OpenAIRE

    Kishu Manghani

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality...

  10. The System 80+ Standard Plant design control document. Volume 15

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains all five parts of section 12 (Radiation Protection) of the ADM Design and Analysis. Topics covered are: ALARA exposures; radiation sources; radiation protection; dose assessment; and health physics program. All six parts and appendices A and B for section 13 (Conduct of Operations) of the ADM Design and Analysis are also contained in this volume. Topics covered are: organizational structure; training program; emergency planning; review and audit; plant procedures; industrial security; sabotage protection (App 13A); and vital equipment list (App 13B)

  11. The System 80+ Standard Plant design control document. Volume 24

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains sections 7--11 of the ADM Emergency Operations Guidelines. Topics covered are: excess steam demand recovery; loss of all feedwater; loss of offsite power; station blackout recovery; and functional recovery guideline. Appendix A Severe Accident Management Guidelines and Appendix B Lower Mode Operational Guidelines are also included

  12. The System 80+ Standard Plant design control document. Volume 16

    International Nuclear Information System (INIS)

    1997-01-01

    This Design Control Document (DCD) is a repository of information comprising the System 80+trademark Standard Plant Design. The DCD also provides that design-related information to be incorporated by reference in the design certification rule for the System 80+ Standard Plant Design. Applicants for a combined license pursuant to 10 CFR 52 must ensure that the final Design Certification Rule and the associated Statements of Consideration are used when making all licensing decisions relevant to the System 80+ Standard Plant Design. The Design Control Document contains the DCD introduction, The Certified Design Material (CDM) [i.e., ''Tier 1''] and the Approved Design Material (ADM) [i.e., ''Tier 2''] for the System 80+ Standard Plant Design. The CDM includes the following sections: (1) Introductory material; (2) Certified Design Material for System 80+ systems and structures; (3) Certified Design Material for non-system-based aspects of the System 80+ Certified design; (4) Interface requirements; and (5) Site parameters. The ADM, to the extent applicable for the System 80+ Standard Plant Design, includes: (1) the information required for the final safety analysis report under 20 CFR 50.34; (2) other relevant information required by 10 CFR 52.47; and (3) emergency operations guidelines. This volume contains all 3 parts of section 14 (Initial Test Program) of the ADM Design and Analysis. Topics covered are: PSAR information; FSAR information; certified design material. Also part 1 of section 15 (Accident Analysis) of the ADM Design and Analysis is included in this volume. The topic of part 1 is increase in heat removal

  13. Space and Missile Systems Center Standard: Space Flight Pressurized Systems

    Science.gov (United States)

    2015-02-28

    25 5.8 Pneumatic System Configuration...temperatures, and thermal gradients. [4.2.5-4] Both membrane stress and bending stress resulting from internal pressure and external loads shall be...welding, bonding, forming, joining, machining , drilling, grinding, repair, etc., processes as applied to joining system 14 components and

  14. The Small Explorer Data System - A data system based on standard interfaces

    Science.gov (United States)

    Smith, Brian S.; Hengemihle, Jerome

    1990-01-01

    The Small Explorer Data System was developed by NASA Goddard Space Flight Center using a 'standard interfaces' approach. Standard interfaces make it adaptable to a wide variety of missions. The paper describes the Small Explorer Data System with particular emphasis on the standard interfaces incorporated in both the hardware and software.

  15. Meeting Residential Ventilation Standards Through Dynamic Control of Ventilation Systems

    Energy Technology Data Exchange (ETDEWEB)

    Sherman, Max H.; Walker, Iain S.

    2011-04-01

    Existing ventilation standards, including American Society of Heating, Refrigerating, and Air-conditioning Engineers (ASHRAE) Standard 62.2, specify continuous operation of a defined mechanical ventilation system to provide minimum ventilation, with time-based intermittent operation as an option. This requirement ignores several factors and concerns including: other equipment such as household exhaust fans that might incidentally provide ventilation, negative impacts of ventilation when outdoor pollutant levels are high, the importance of minimizing energy use particularly during times of peak electricity demand, and how the energy used to condition air as part of ventilation system operation changes with outdoor conditions. Dynamic control of ventilation systems can provide ventilation equivalent to or better than what is required by standards while minimizing energy costs and can also add value by shifting load during peak times and reducing intake of outdoor air contaminants. This article describes the logic that enables dynamic control of whole-house ventilation systems to meet the intent of ventilation standards and demonstrates the dynamic ventilation system control concept through simulations and field tests of the Residential Integrated Ventilation-Energy Controller (RIVEC).

  16. 40 CFR 265.1055 - Standards: Sampling connection systems.

    Science.gov (United States)

    2010-07-01

    ... capture and transport all the purged process fluid to a waste management unit that complies with the... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Standards: Sampling connection systems. 265.1055 Section 265.1055 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...

  17. 40 CFR 61.242-5 - Standards: Sampling connecting systems.

    Science.gov (United States)

    2010-07-01

    ...) A waste management unit as defined in 40 CFR 63.111 if the waste management unit is subject to and... municipal or industrial solid waste, if the process fluids are not hazardous waste as defined in 40 CFR part... 40 Protection of Environment 8 2010-07-01 2010-07-01 false Standards: Sampling connecting systems...

  18. 40 CFR 264.1055 - Standards: Sampling connection systems.

    Science.gov (United States)

    2010-07-01

    ... operated to capture and transport all the purged process fluid to a waste management unit that complies... 40 Protection of Environment 25 2010-07-01 2010-07-01 false Standards: Sampling connection systems. 264.1055 Section 264.1055 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) SOLID...

  19. Open Architecture Standards and Information Systems (OASIS II ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    Open Architecture Standards and Information Systems (OASIS II) - Developing Capacity, Sharing Knowledge and Good Principles Across eHealth in Africa. Health care across much of the African continent is hampered by meager resources and a growing burden of disease, with HIV/AIDS, tuberculosis (TB) and malaria ...

  20. Implementation of Medical Information Exchange System Based on EHR Standard.

    Science.gov (United States)

    Han, Soon Hwa; Lee, Min Ho; Kim, Sang Guk; Jeong, Jun Yong; Lee, Bi Na; Choi, Myeong Seon; Kim, Il Kon; Park, Woo Sung; Ha, Kyooseob; Cho, Eunyoung; Kim, Yoon; Bae, Jae Bong

    2010-12-01

    To develop effective ways of sharing patients' medical information, we developed a new medical information exchange system (MIES) based on a registry server, which enabled us to exchange different types of data generated by various systems. To assure that patient's medical information can be effectively exchanged under different system environments, we adopted the standardized data transfer methods and terminologies suggested by the Center for Interoperable Electronic Healthcare Record (CIEHR) of Korea in order to guarantee interoperability. Regarding information security, MIES followed the security guidelines suggested by the CIEHR of Korea. This study aimed to develop essential security systems for the implementation of online services, such as encryption of communication, server security, database security, protection against hacking, contents, and network security. The registry server managed information exchange as well as the registration information of the clinical document architecture (CDA) documents, and the CDA Transfer Server was used to locate and transmit the proper CDA document from the relevant repository. The CDA viewer showed the CDA documents via connection with the information systems of related hospitals. This research chooses transfer items and defines document standards that follow CDA standards, such that exchange of CDA documents between different systems became possible through ebXML. The proposed MIES was designed as an independent central registry server model in order to guarantee the essential security of patients' medical information.

  1. System 80+{trademark} standard design incorporates radiation protection lessons learned

    Energy Technology Data Exchange (ETDEWEB)

    Crom, T.D.; Naugle, C.L. [Duke Engineering & Services, Inc., Charlotte, NC (United States); Turk, R.S. [ABB Combustion Engineering Nuclear Power, Windsor, CT (United States)

    1995-03-01

    Many lessons have been learned from the current generation of nuclear plants in the area of radiation protection. The following paper will outline how the lessons learned have been incorporated into the design and operational philosophy of the System 80+{trademark} Standard Design currently under development by ABB Combustion Engineering (ABB-CE) with support from Duke Engineering and Services, Inc. and Stone and Webster Engineering Corporation in the Balance-of-Plant design. The System 80+{trademark} Standard Design is a complete nuclear power plant for national and international markets, designed in direct response to utility needs for the 1990`s, and scheduled for Nuclear Regulatory Commission (NRC) Design Certification under the new standardization rule (10 CFR Part 52). System 80+{trademark} is a natural extension of System 80{sup R} technology, an evolutionary change based on proven Nuclear Steam Supply System (NSSS) in operation at Palo Verde in Arizona and under construction at Yonggwang in the Republic of Korea. The System 80+{trademark} Containment and much of the Balance of Plant design is based upon Duke Power Company`s Cherokee Plant, which was partially constructed in the late 1970`s, but, was later canceled (due to rapid declined in electrical load growth). The System 80+{trademark} Standard Design meets the requirements given in the Electric Power Research Institute (EPRI) Advanced Light Water Reactor (ALWR) Requirements Document. One of these requirements is to limit the occupational exposure to 100 person-rem/yr. This paper illustrates how this goal can be achieved through the incorporation of lessons learned, innovative design, and the implementation of a common sense approach to operation and maintenances practices.

  2. Standard Guide for Specifying Thermal Performance of Geothermal Power Systems

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2000-01-01

    1.1 This guide covers power plant performance terms and criteria for use in evaluation and comparison of geothermal energy conversion and power generation systems. The special nature of these geothermal systems makes performance criteria commonly used to evaluate conventional fossil fuel-fired systems of limited value. This guide identifies the limitations of the less useful criteria and defines an equitable basis for measuring the quality of differing thermal cycles and plant equipment for geothermal resources. 1.2 This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  3. Quality assurance: Importance of systems and standard operating procedures.

    Science.gov (United States)

    Manghani, Kishu

    2011-01-01

    It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  4. Standard Practice for Quality Management Systems for Nondestructive Testing Agencies

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice covers general requirements for the establishment and maintenance of a quality management system for agencies engaged in nondestructive testing (NDT). 1.2 This practice utilizes criteria contained in Practice E 543. 1.3 This practice utilizes criteria contained in American National Standard ANSI/ISO/ASQ Q9001–2000, Quality management systems—Requirements. 1.4 This practice recognizes the importance of establishing minimum safety criteria. 1.5 The use of SI or inch-pound units, or combinations thereof, will be the responsibility of the technical committee whose standards are referred to in this standard. 1.6 This practice does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this practice to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  5. Recommendations for a proposed standard for performing systems analysis

    International Nuclear Information System (INIS)

    LaChance, J.; Whitehead, D.; Drouin, M.

    1998-01-01

    In August 1995, the Nuclear Regulatory Commission (NRC) issued a policy statement proposing improved regulatory decisionmaking by increasing the use of PRA [probabilistic risk assessment] in all regulatory matters to the extent supported by the state-of-the-art in PRA methods and data. A key aspect in using PRA in risk-informed regulatory activities is establishing the appropriate scope and attributes of the PRA. In this regard, ASME decided to develop a consensus PRA Standard. The objective is to develop a PRA Standard such that the technical quality of nuclear plant PRAs will be sufficient to support risk-informed regulatory applications. This paper presents examples recommendations for the systems analysis element of a PRA for incorporation into the ASME PRA Standard

  6. STANDARDIZATION AND APPLICATION OF PLASTIC CARDS IN THE EDUCATIONAL SYSTEMS

    Directory of Open Access Journals (Sweden)

    Polina V. Baranova

    2015-01-01

    Full Text Available The application of plastic cards has been widely increasing in various fields of life, business and education. They have already become up-to-date and convenient attribute of our daily life. There are emerging more and more areas where they can be used in a convenient and practical way. Contactless smart cards can be used in access control in the educational systems. This article gives an overview of existing standards dealing with contactless identification smart-cards. All standards covered in this article are developed by the Federal State Unitary Enterprise VNIINMASH jointly with TC 22 «Information Technology» based on their own authentic Russian translation of international standards

  7. Performance Measurement of Management System Standards Using the Balanced Scorecard

    Directory of Open Access Journals (Sweden)

    Jan Kopia

    2017-11-01

    Full Text Available Management system standards (MSS, such as ISO standards, TQM, etc. are widely-used standards adopted by millions of organizations worldwide. It is still an unclear question whether these standards are beneficial for an organization, besides the fact that they might be required or expected by law or customers. The question, whether MSS increase the efficiency, the output, or the performance of an organization is still discussed in scientific research. One reason might be that performance measurement itself is not fully understood or in constant development ranging from pure financial evaluations over intellectual capital rating to calculating of levels of environmental, social or economic expectations known as the Trible Bottom Line. The Balanced Scorecard is one possible solution for performance measurement on a strategic and operational level and therefore useful for the measurement of the influence of MSS within organizations. This study summarized current research in the field of performance measurement in the context of MSS and IMS and the use of BSC and quantitatively and qualitatively tests the usefulness of BSC in measuring the effect of MSSs using the Execution Premium. It was found that BSC is often used, that an average number of companies integrate their measurement initiatives of their MSSs into the BSC-process, and that a high integration of MSS into the BSC improves the organizational performance. This research is useful for researchers and practitioners in order to understand the benefits of the usage of the BSC in the context of MSS or Integrated Management Systems.

  8. Distributed intelligence in CAMAC

    International Nuclear Information System (INIS)

    Kunz, P.F.

    1977-01-01

    A simple extension of the CAMAC standard is described which allows distributed intelligence at the crate level. By distributed intelligence is meant that there is more than one source of control in a system. This standard is just now emerging from the NIM Dataway Working Group and its European counterpart. 1 figure

  9. Sensor Open System Architecture (SOSA) evolution for collaborative standards development

    Science.gov (United States)

    Collier, Charles Patrick; Lipkin, Ilya; Davidson, Steven A.; Baldwin, Rusty; Orlovsky, Michael C.; Ibrahim, Tim

    2017-04-01

    The Sensor Open System Architecture (SOSA) is a C4ISR-focused technical and economic collaborative effort between the Air Force, Navy, Army, the Department of Defense (DoD), Industry, and other Governmental agencies to develop (and incorporate) a technical Open Systems Architecture standard in order to maximize C4ISR sub-system, system, and platform affordability, re-configurability, and hardware/software/firmware re-use. The SOSA effort will effectively create an operational and technical framework for the integration of disparate payloads into C4ISR systems; with a focus on the development of a modular decomposition (defining functions and behaviors) and associated key interfaces (physical and logical) for common multi-purpose architecture for radar, EO/IR, SIGINT, EW, and Communications. SOSA addresses hardware, software, and mechanical/electrical interfaces. The modular decomposition will produce a set of re-useable components, interfaces, and sub-systems that engender reusable capabilities. This, in effect, creates a realistic and affordable ecosystem enabling mission effectiveness through systematic re-use of all available re-composed hardware, software, and electrical/mechanical base components and interfaces. To this end, SOSA will leverage existing standards as much as possible and evolve the SOSA architecture through modification, reuse, and enhancements to achieve C4ISR goals. This paper will present accomplishments over the first year of SOSA initiative.

  10. Development of industry standards for composite repair systems

    Energy Technology Data Exchange (ETDEWEB)

    Alexander, Chris [Stress Engineering Services, Inc. (United States)], email: chris.alexander@stress.com; Worth, Franz [Air Logistics, Inc. (United States)], email: fworth@airlog.com

    2010-07-01

    Lots of work has transpired over the past several years in generating consensus-based standards that include ASME PCC-2 and ISO 24817 for developing composite repair systems. The intent has been to provide the industry with guidelines for designing composite repair systems to ensure that damaged pipelines and piping systems are safely and properly reinforced. With the numerous composite repair systems currently available to pipeline operators, the importance of evaluating the capabilities of each system cannot be overstated. The fundamental design variables available to manufacturers are stiffness, strength and thickness of the composite. A properly-designed repair system ensures that strains in the reinforced steel and reinforcing composite material do not reach unacceptable levels. This paper provides a basic overview of the design philosophy embedded into the current design codes, as well as presenting results associated with several specific studies that were conducted to evaluate composite repair performance. The pipeline industry is being well-served through the development of these standards.

  11. A constructive critique of the three standard systems

    International Nuclear Information System (INIS)

    Wilczek, F.

    2004-01-01

    It has become conventional to say that our knowledge of fundamental physical law is summarized in a Standard Model. But this convention lumps together two quite different conceptual structures, and leaves out another. I think it is more accurate and informative to say that our current, working description of fundamental physics is based on three standard conceptual systems. These systems are very different; so different that it is not inappropriate to call them the Good, the Bad, and the Ugly. They concern, respectively, the coupling of vector gauge particles, gravitons, and Higgs particles. It is quite a remarkable fact, in itself, that every nonlinear interaction we need to summarize our present knowledge of the basic (i.e., irreducible) laws of physics involves one or another of these particles. (author)

  12. A New System of Faint Near-Infrared Standard Stars

    Science.gov (United States)

    Persson, S. E.; Murphy, D. C.; Krzeminski, W.; Roth, M.; Rieke, M. J.

    1998-11-01

    A new grid of 65 faint near-infrared standard stars is presented. They are spread around the sky, lie between 10th and 12th magnitude at K, and are measured in most cases to precisions better than 0.001 mag in the J, H, K, and K_s bands; the latter is a medium-band modified K. A secondary list of red stars suitable for determining color transformations between photometric systems is also presented.

  13. Examination of the Benefits of Standardized Interfaces on Space Systems

    Science.gov (United States)

    2015-09-01

    Jeff Bezos with Blue Origin. All of these entrepreneurs have invested billions of privately funded dollars into their respective companies to...focused on developing systems that best captures the requirements of the end users at an indeterminate cost. With this mindset within the USG, each...Multiple factors ensue before standardization can take place, such key issues include changing the current mindset with the current design approach of

  14. Towards a Standard for Highly Secure SCADA Systems

    Energy Technology Data Exchange (ETDEWEB)

    Carlson, R.

    1998-09-25

    The critical energy inkstructures include gas, OL and electric power. These Mrastructures are complex and interdependent nmvorks that are vital to the national secwiy and social well being of our nation. Many electric power systems depend upon gas and oil, while fossil energy delive~ systems depend upon elecnic power. The control mechanisms for these Mrastructures are often referred to as SCADA (Supmivry CkmdandDaU Ac@itz&z) systems. SCADA systems provide remote monitoring and centralized control for a distributed tmnsportation infmsmucture in order to facilitate delivery of a commodi~. AIthough many of the SCADA concepts developed in this paper can be applied to automotive mmsponation systems, we will use transportation to refer to the movement of electrici~, gas, and oil. \\ Recently, there have been seveml reports suggesting that the widespread and increasing use of SCADA for control of energy systems provides an increasing opportuni~ for an advers~ to cause serious darnage to the energy inbstmcturei~. This damage could arise through cyber infiltration of the SCADA networks, by physically tampering with the control networks, or through a combination of both means. SCADA system threats decompose into cyber and physical threats. One solution to the SCADA security problem is to design a standard for a highly secure KA.DA system that is both cyber, and physdly secure. Not all-physical threats are possible to guard again% but of those threats that are, high security SCADA provides confidence that the system will continue to operate in their presence. One of the most important problems in SCADA securi~ is the relationship between the cyber and physical vulnerabilities. Cyber intrusion increases physical Vulnerabilities, while in the dual problem physical tampering increases cyber vulnerabilit.ies. There is potential for feedback and the precise dynamics need to be understood. As a first step towards a stan~ the goal of this paper is to facilitate a discussion of the

  15. Standard hydrogen monitoring system-B operation and maintenance manual

    International Nuclear Information System (INIS)

    Bender, R.M.

    1995-01-01

    The purpose of this document is to provide information for the operation and maintenance of the Standards Hydrogen Monitoring System-B (SHMS-B) used in the 200E and 200W area tank farms on the Hanford site. This provides information specific to the mechanical operation of the system and is not intended to take the place of a Plant Operating Procedure. The primary function of the SHMS-B is to monitor specifically for hydrogen in the waste tank vapor space which may also contain unknown quantities of other gaseous constituents

  16. Computer system validation: an overview of official requirements and standards.

    Science.gov (United States)

    Hoffmann, A; Kähny-Simonius, J; Plattner, M; Schmidli-Vckovski, V; Kronseder, C

    1998-02-01

    A brief overview of the relevant documents for companies in the pharmaceutical industry, which are to be taken into consideration to fulfil computer system validation requirements, is presented. We concentrate on official requirements and valid standards in the USA, European Community and Switzerland. There are basically three GMP-guidelines. their interpretations by the associations of interests like APV and PDA as well as the GAMP Suppliers Guide. However, the three GMP-guidelines imply the same philosophy about computer system validation. They describe more a what-to-do approach for validation, whereas the GAMP Suppliers Guide describes a how-to-do validation. Nevertheless, they do not contain major discrepancies.

  17. Interoperability through standardization: Electronic mail, and X Window systems

    Science.gov (United States)

    Amin, Ashok T.

    1993-01-01

    Since the introduction of computing machines, there has been continual advances in computer and communication technologies and approaching limits. The user interface has evolved from a row of switches, character based interface using teletype terminals and then video terminals, to present day graphical user interface. It is expected that next significant advances will come in the availability of services, such as electronic mail and directory services, as the standards for applications are developed and in the 'easy to use' interfaces, such as Graphical User Interface for example Window and X Window, which are being standardized. Various proprietary electronic mail (email) systems are in use within organizations at each center of NASA. Each system provides email services to users within an organization, however the support for email services across organizations and across centers exists at centers to a varying degree and is often easy to use. A recent NASA email initiative is intended 'to provide a simple way to send email across organizational boundaries without disruption of installed base.' The initiative calls for integration of existing organizational email systems through gateways connected by a message switch, supporting X.400 and SMTP protocols, to create a NASA wide email system and for implementation of NASA wide email directory services based on OSI standard X.500. A brief overview of MSFC efforts as a part of this initiative are described. Window based graphical user interfaces make computers easy to use. X window protocol has been developed at Massachusetts Institute of Technology in 1984/1985 to provide uniform window based interface in a distributed computing environment with heterogenous computers. It has since become a standard supported by a number of major manufacturers. Z Windows systems, terminals and workstations, and X Window applications are becoming available. However impact of its use in the Local Area Network environment on the network

  18. Standard hydrogen monitoring system - E operation and maintenance manual

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1997-01-01

    The purpose of this document is to provide information for the operation and maintenance of the Standard Hydrogen Monitoring System- E (SHMS-E) used in the 200E and 20OW area tank farms on the Hanford Site. This provides information specific to the mechanical operation of the system and is not intended to take the place of a Plant Operating Procedure. However, it does provide more information on the system than a Plant Operating Procedure. The intent here is that the system is started up by a technician or engineer who has completed tank farms training course for SHMS, and then the only actions performed by Operations will be routine log taking. If any problems not addressed by the operating procedure are encountered with the unit, engineering should be contacted

  19. Standard Hydrogen Monitoring System-D operation and maintenance manual

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1997-01-01

    The purpose of this document is to provide information for the operation and maintenance of the Standard Hydrogen Monitoring System-D (SHMS-D) used in the 200E and 200W area tank farms on the Hanford Site. This provides information specific to the mechanical operation of the system and is not intended to take the place of a Plant Operating Procedure. However, it does provide more information on the system than a Plant Operating Procedure. The intent here is that the system is started up by a technician or engineer who has completed tank farms training course No. 351405, and then the only actions performed by Operations will be routine log taking. If any problems not addressed by the operating procedure are encountered with the unit, engineering should be contacted

  20. Open Source, Open Standards, and Health Care Information Systems

    Science.gov (United States)

    2011-01-01

    Recognition of the improvements in patient safety, quality of patient care, and efficiency that health care information systems have the potential to bring has led to significant investment. Globally the sale of health care information systems now represents a multibillion dollar industry. As policy makers, health care professionals, and patients, we have a responsibility to maximize the return on this investment. To this end we analyze alternative licensing and software development models, as well as the role of standards. We describe how licensing affects development. We argue for the superiority of open source licensing to promote safer, more effective health care information systems. We claim that open source licensing in health care information systems is essential to rational procurement strategy. PMID:21447469

  1. A Standardized Evaluation System for Decadal Climate Prediction

    Science.gov (United States)

    Kadow, C.; Cubasch, U.

    2012-12-01

    The evaluation of decadal prediction systems is a scientific challenge as well as a technical challenge in the climate research. The major project MiKlip (www.fona-miklip.de) for medium-term climate prediction funded by the Federal Ministry of Education and Research in Germany (BMBF) has the aim to create a model system that can provide reliable decadal forecasts on climate and weather. The model system to be developed will be novel in several aspects, with great challenges for the methodology development. This concerns especially the determination of the initial conditions, the inclusion into the model of processes relevant to decadal predictions, the increase of the spatial resolution through regionalisation, the improvement or adjustment of statistical post-processing, and finally the synthesis and validation of the entire model system. Therefore, a standardized evaluation system will be part of the MiKlip system to validate it - developed by the project 'Integrated data and evaluation system for decadal scale prediction' (INTEGRATION). The presentation gives an overview of the different linkages of such a project, shows the different development stages and gives an outlook for users and possible end users in climate service. The technical interface combines all projects inside of MiKlip and invites them to participate in a common evaluation system. The system design and the validation strategy from a standalone tool in the beginning to a user friendly web based system using GRID technologies to an integrated part of the operational MiKlip system for industry and society will give the opportunity to enhance the MiKlip strategy. First results of different possibilities of such a system will be shown to present the scientific background through Taylor diagrams, ensemble skill scores and e.g. climatological means to show the usability and possibilities of MiKlip and the INTEGRATION project.

  2. How Modeling Standards, Software, and Initiatives Support Reproducibility in Systems Biology and Systems Medicine.

    Science.gov (United States)

    Waltemath, Dagmar; Wolkenhauer, Olaf

    2016-10-01

    Only reproducible results are of significance to science. The lack of suitable standards and appropriate support of standards in software tools has led to numerous publications with irreproducible results. Our objectives are to identify the key challenges of reproducible research and to highlight existing solutions. In this paper, we summarize problems concerning reproducibility in systems biology and systems medicine. We focus on initiatives, standards, and software tools that aim to improve the reproducibility of simulation studies. The long-term success of systems biology and systems medicine depends on trustworthy models and simulations. This requires openness to ensure reusability and transparency to enable reproducibility of results in these fields.

  3. Standards, Data Exchange and Intellectual Property Rights in Systems Biology

    DEFF Research Database (Denmark)

    van Zimmeren, Esther; Rutz, Berthold; Minssen, Timo

    2016-01-01

    and qualitative data on biological processes and activities in much greater volumes, velocity, variety and veracity. The skilful integration of multiple heterogeneous data sets allows scientists to model and predict biological processes. SysBio’s interdisciplinary nature requires data, models and other research...... we provided a number of recommendations for a variety of stakeholders. The current article offers some deeper reflections about the interface between IPRs, standards and data exchange in Systems Biology resulting from an Expert Meeting funded by another ERA-Net, ERASysAPP. The meeting brought...... assets to be formatted and described in standard ways to enable exchange and reuse of high quality data. This allows a more effective utilisation of the enormous potential that rests in “big data” analysis. Finally, SysBio is often closely linked to or provides the foundation for Synthetic Biology (Syn...

  4. Standard-C hydrogen monitoring system acceptance test procedure

    Energy Technology Data Exchange (ETDEWEB)

    Schneider, T.C.

    1994-09-02

    The primary function of the standard-C hydrogen monitoring system (SHMS) is to monitor specifically for hydrogen in the waste tank atmosphere which may also contain (but not be limited to) unknown quantities of air, nitrous oxide, ammonia, water vapor, carbon dioxide, carbon monoxide, and other gaseous constituents. The SHMS will consist of hydrogen specific monitors, a grab sampler to collect samples for laboratory analysis, a gas chromatograph, and the gas sample collection system necessary to support the operation of the instrumentation. This system will be located in a cabinet placed at the tank of interest. The purpose of this document is to demonstrate that the SHMS is constructed as intended by design.

  5. 78 FR 6732 - Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report...

    Science.gov (United States)

    2013-01-31

    ... SECURITY Coast Guard 33 CFR Parts 173, 174, 181, and 187 RIN 1625-AB45 Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report Database AGENCY: Coast Guard, DHS. ACTION: Rule... Numbering System, Vessel Identification System, and Boating Accident Report Database rule became effective...

  6. Japanese Cost Accounting Systems - analysis of the cost accounting systems of the Japanese cost accounting standard

    OpenAIRE

    Peter, Winter

    2005-01-01

    This paper aims at providing an insight into Japanese cost accounting. Firstly, the development of cost accounting in Japan is delineated. Subsequently, the cost accounting systems codified in the Japanese cost accounting standard are analysed based on the classification according to Hoitsch/Schmitz. Lastly, a critical appraisal of the cost accounting systems of the Japanese cost accounting standard as well as a comparison to German and American cost accounting systems are conducted.

  7. Electronic circuits, systems and standards the best of EDN

    CERN Document Server

    Hickman, Ian

    2013-01-01

    Electronic Circuits, Systems and Standards: The Best of EDN is a collection of 66 EDN articles. The topics covered in this collection are diverse but all are relevant to controlled circulation electronics. The coverage of the text includes topics about software and algorithms, such as simple random number algorithm; simple log algorithm; and efficient algorithm for repeated FFTs. The book also tackles measurement related topics, including test for identifying a Gaussian noise source; enhancing product reliability; and amplitude-locked loop speeds filter test. The text will be useful to student

  8. Electronic health record standards, coding systems, frameworks, and infrastructures

    CERN Document Server

    Sinha, Pradeep K; Bendale, Prashant; Mantri, Manisha; Dande, Atreya

    2013-01-01

    Discover How Electronic Health Records Are Built to Drive the Next Generation of Healthcare Delivery The increased role of IT in the healthcare sector has led to the coining of a new phrase ""health informatics,"" which deals with the use of IT for better healthcare services. Health informatics applications often involve maintaining the health records of individuals, in digital form, which is referred to as an Electronic Health Record (EHR). Building and implementing an EHR infrastructure requires an understanding of healthcare standards, coding systems, and frameworks. This book provides an

  9. Quality assurance: Importance of systems and standard operating procedures

    Directory of Open Access Journals (Sweden)

    Kishu Manghani

    2011-01-01

    Full Text Available It is mandatory for sponsors of clinical trials and contract research organizations alike to establish, manage and monitor their quality control and quality assurance systems and their integral standard operating procedures and other quality documents to provide high-quality products and services to fully satisfy customer needs and expectations. Quality control and quality assurance systems together constitute the key quality systems. Quality control and quality assurance are parts of quality management. Quality control is focused on fulfilling quality requirements, whereas quality assurance is focused on providing confidence that quality requirements are fulfilled. The quality systems must be commensurate with the Company business objectives and business model. Top management commitment and its active involvement are critical in order to ensure at all times the adequacy, suitability, effectiveness and efficiency of the quality systems. Effective and efficient quality systems can promote timely registration of drugs by eliminating waste and the need for rework with overall financial and social benefits to the Company.

  10. Relating Standardized Visual Perception Measures to Simulator Visual System Performance

    Science.gov (United States)

    Kaiser, Mary K.; Sweet, Barbara T.

    2013-01-01

    Human vision is quantified through the use of standardized clinical vision measurements. These measurements typically include visual acuity (near and far), contrast sensitivity, color vision, stereopsis (a.k.a. stereo acuity), and visual field periphery. Simulator visual system performance is specified in terms such as brightness, contrast, color depth, color gamut, gamma, resolution, and field-of-view. How do these simulator performance characteristics relate to the perceptual experience of the pilot in the simulator? In this paper, visual acuity and contrast sensitivity will be related to simulator visual system resolution, contrast, and dynamic range; similarly, color vision will be related to color depth/color gamut. Finally, we will consider how some characteristics of human vision not typically included in current clinical assessments could be used to better inform simulator requirements (e.g., relating dynamic characteristics of human vision to update rate and other temporal display characteristics).

  11. Integration of virtualized worker nodes in standard batch systems

    International Nuclear Information System (INIS)

    Buege, Volker; Kunze, Marcel; Oberst, Oliver; Quast, Guenter; Scheurer, Armin; Hessling, Hermann; Kemp, Yves; Synge, Owen

    2010-01-01

    Current experiments in HEP only use a limited number of operating system flavours. Their software might only be validated on one single OS platform. Resource providers might have other operating systems of choice for the installation of the batch infrastructure. This is especially the case if a cluster is shared with other communities, or communities that have stricter security requirements. One solution would be to statically divide the cluster into separated sub-clusters. In such a scenario, no opportunistic distribution of the load can be achieved, resulting in a poor overall utilization efficiency. Another approach is to make the batch system aware of virtualization, and to provide each community with its favoured operating system in a virtual machine. Here, the scheduler has full flexibility, resulting in a better overall efficiency of the resources. In our contribution, we present a lightweight concept for the integration of virtual worker nodes into standard batch systems. The virtual machines are started on the worker nodes just before jobs are executed there. No meta-scheduling is introduced. We demonstrate two prototype implementations, one based on the Sun Grid Engine (SGE), the other using Maui/Torque as a batch system. Both solutions support local job as well as Grid job submission. The hypervisors currently used are Xen and KVM, a port to another system is easily envisageable. To better handle different virtual machines on the physical host, the management solution VmImageManager is developed. We will present first experience from running the two prototype implementations. In a last part, we will show the potential future use of this lightweight concept when integrated into high-level (i.e. Grid) work-flows.

  12. 75 FR 49869 - Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report...

    Science.gov (United States)

    2010-08-16

    ... SECURITY Coast Guard 33 CFR Parts 173, 174, 181, and 187 RIN 1625-AB45 Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report Database AGENCY: Coast Guard, DHS. ACTION..., Vessel Identification System, and Boating Accident Report Database. DATES: Comments and related material...

  13. 49 CFR 571.122 - Standard No. 122; Motorcycle brake systems.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 6 2010-10-01 2010-10-01 false Standard No. 122; Motorcycle brake systems. 571... Federal Motor Vehicle Safety Standards § 571.122 Standard No. 122; Motorcycle brake systems. S1. Scope. This standard specifies performance requirements for motorcycle brake systems. S2. Purpose. The purpose...

  14. National System of Standard Reference Data in Korea

    International Nuclear Information System (INIS)

    Kim, C.-G.

    2012-01-01

    National Center for Standard Reference Data (NCSRD) was established in 2006 by law, based on the Fundamental Act for National Standard. The motivation of establishment was caused by the demand from the industry for data with a guaranteed quality. As is well known, Korean industry has grown very fast during the last 50 years. They begin to realize that data with a high quality is very essential in good design and manufacturing of high quality products. At the same time, the standard of living has increased in parallel with the development of industry. People begin to be concerned about health diagnosis, food products, and environment. This concern about quality of life naturally leads to an interest on the reference data related with health and the environment. To satisfy these demands from the industry as well as from the people, the Korean government decided to establish a national system for the evaluation of data quality produced by the R and D institutes and universities. NCSRD coordinates all the national activities regarding evaluation and dissemination of scientific data by law. The primary goal of the NCSRD is to develop and disseminate standard reference data which are critically evaluated for their reliability by experts for use in technical problem-solving, research and development. NCSRD consist of a steering committee (SC), spectral technical committees (TCs) and data centres. Right now there are 22 data centres designated by the Minister of Knowledge and Economics (MKE) and 24 technical committees for data evaluation. The Steering Committee acts as the top decision-making body of the SRD program. The members of the SC consist of 11 experts from universities, research institutes and industries. Technical committees in each area serve as an expert group to deal with data-related matters such as evaluation of the reliability of the collected or measured data, development of detailed data evaluation guidelines in each area, etc. The detailed data

  15. Hydrogenic systems for calculable frequency standards. Status and options

    International Nuclear Information System (INIS)

    Flowers, J.; Klein, H.; Knight, D.

    2001-01-01

    The study of hydrogen and hydrogenic (one-electron) ions is an area of rapid progress and one of great potential for future frequency standards. In 1997, the two-photon 1S-2S transition in the hydrogen atom was included in the list of approved radiations for the practical realisation of the metre, and since then revolutions in optical frequency metrology have reduced the uncertainty in its frequency by more than an order of magnitude, to 1.8 parts in 10 14 . Hydrogenic systems are simple enough that the frequencies of their transitions can be calculated in terms of the Rydberg constant with an accuracy that can approach or exceed the measurement uncertainty. Transitions in such systems can be thought of as forming a natural frequency scale, and offer the prospect of a set of quantum frequency standards which are directly related to the fundamental constants. The Rydberg constant is currently best determined from optical frequency measurements in hydrogen. However, to take full advantage of the recent high accuracy 1S-2S frequency measurement requires: Improved measurements of other transition frequencies in the hydrogen atom; Reduced uncertainty in the quantum electrodynamic (QED) contributions to the energy levels, in particular the two-loop binding corrections; An improved value for the proton charge radius. In He + and one-electron systems of higher atomic number Z, the two-loop binding corrections are a fractionally larger part of the Lamb shift due to their rapid scaling with Z. Measurements of the Lamb shift in medium-Z hydrogenic ions can therefore provide tests of these corrections, and feed in to the theoretical understanding of hydrogen itself Although both theory and experiment are less accurate at higher Z, there is the potential for a new range of X-ray standards, providing that the QED corrections are well understood and new absolute measurement techniques can be developed. A number of areas are suggested for future investigation: Improving the

  16. Network management and signalling standards for CCSDS advanced orbiting system communication systems

    Science.gov (United States)

    Pietras, John

    The Consultative Committee for Space Data Systems (CCSDS) is an international organization chartered to develop and adopt communications protocols and data processing standards suitable for use in space-related communication and data processing systems. This paper briefly describes the CCSDS network management environment and reviews the current status of CCSDS recommendations for network management functional capability, use of internal standard for network management, and composition of signaling systems in support of the advanced orbiting systems services typified by the international Space Station Freedom Program. A timetable for future work in this area is presented.

  17. Automated system for calculating the uncertainty of standards

    International Nuclear Information System (INIS)

    Harvel, C.D.

    1990-01-01

    Working Calibration and Test Material (WCTM) solutions are essential as standards in the surveillance of analytical methods, the calibration of equipment and methods, and the training and testing of laboratory personnel. Before the WCTM can be used it must be characterized. That is, the WCTM concentration and its associated uncertainty must be estimated. The characterization of a WCTM is a tedious process. The chemistry and subsequent statistical analysis require a significant amount of care. For a nonstatistician, the statistical analysis of a WCTM characterization can be quite difficult. In addition, the WCTM traceability and characterization must be thoroughly documented as required by DOE Order 5633.3 [1]. An automated system can easily do the statistical analysis and provide the necessary documentation. 3 refs., 2 figs

  18. A trial fabrication of activity standard surface sources and positional standard surface sources for an imaging plate system

    International Nuclear Information System (INIS)

    Sato, Yasushi; Hino, Yoshio; Yamada, Takahiro; Matsumoto, Mikio

    2003-01-01

    An imaging plate system can detect low level activity, but quantitative analysis is difficult because there are no adequate standard surface sources. A new fabrication method was developed for standard surface sources by printing on a sheet of paper using an ink-jet printer with inks in which a radioactive material was mixed. The fabricated standard surface sources had high uniformity, high positional resolution arbitrary shapes and a broad intensity range. The standard sources were used for measurement of surface activity as an application. (H. Yokoo)

  19. Ca II H and K filter photometry on the uvby system. I - The standard system

    Energy Technology Data Exchange (ETDEWEB)

    Anthony-twarog, B.J.; Twarog, B.A.; Laird, J.B.; Payne, D. (Kansas, University, Lawrence (USA) Cerro Tololo Inter-American Observatory, La Serena (Chile) Bowling Green State University, OH (USA))

    1991-05-01

    A fifth filter (fwhm = 90 A) centered on Ca II H and K has been developed for use with the standard uvby system. The filter, called Ca, is designed primarily for applications to metal-poor dwarfs and red giants, regions where the uvby metallicity index, m(l), loses some sensitivity. An index, hk, is defined by replacing v in m(l) by Ca. The effects of interstellar extinction on the index are modeled and demonstrated to be modest and relatively insensitive to spectral type. Observations of V, (b-y), and hk for 163 primary standards are detailed and transformed to the standard V and (b-y) system. A qualitative analysis using only the primary standards indicates that hk is more sensitive than m(l) over the regions of interest by about a factor of 3. 58 refs.

  20. From Paper to Practice; Indexing Systems and Ethical Standards.

    Science.gov (United States)

    Astaneh, Behrooz; Masoumi, Sarah

    2017-04-11

    Currently one of the main goals of editors is to attain a higher visibility for their journals. On the other hand, authors strive to publish their research in journals indexed in eminent databases such as Scopus, Thompson Reuters' Web of Science (ISI), Medline, etc. Therefore, clarifying the standards of indexing is of great importance. One of the most important issues in publication is the ethical considerations, which are mainly described by organizations, such as the International Committee of Medical Journal Editors and the Committee on Publication Ethics. In this study, we examined the ethical requirements of high impact databases for indexing journals to investigate whether they mention or mandate journals to adhere to publication ethics. We found that only Scopus mandated journals to state clear ethical policies on their website as a criterion for being indexed while Medline and Directory of Open Access Journals advised journals to adhere to ethics, not mandated, and Web of Science (ISI) and PubMed Central made no mention of ethics as a required criterion for indexing. Based on this short review, there seems to be a gap between the requirements of indexing systems and international guidelines for publication ethics. Currently, most indexing systems have only partially recommended journals to consider ethical issues. In such an atmosphere, we cannot expect journals or as a result, authors to professionally, completely, and whole heartedly implement ethical guidelines as a mandatory rule in their journals and research, when the indexing systems that most editors want to be indexed in and most authors want to be cited in do not mandate such guidelines.

  1. Issues and possible solutions of nuclear power standard system in china

    International Nuclear Information System (INIS)

    Li Xiaoyan; Pu Jilong

    2008-01-01

    The construction of nuclear power standard system shall follow the development state of the nuclear power in China, and shall be taken as one of the important support for the self-reliance in the development of nuclear industry. However, there is no national nuclear power standard systems that is matched to the industrial system and technology base in China. It is widely recognized in nuclear industry that the nuclear power standard system must be established. This paper discusses various problems of the current national nuclear power standard system and suggests the possible solutions. Electricity industry standard system can be referenced to set up nuclear power standard system in China. Considering the need to construct a lot of PWR nuclear power stations in China, the design and construction standard system for PWR NPP shall be established. The nuclear safety guides in China shall be incorporated into the nuclear power standards. (authors)

  2. Open Geospatial Consortium standards supporting Lake Maggiore Early Warning System

    Science.gov (United States)

    Cannata, Massimiliano; Antonovic, Milan; Molinari, Monia; Pozzoni, Maurizio

    2013-04-01

    The Locarno area (Canton Ticino, Switzerland) is an area exposed to lake Maggiore flooding risk. In order to reduce the effects of such a kind of events, the Canton Ticino [1] and the Locarno and Vallemaggia Civil Protection [2] provide mandates to the Institute of Earth sciences of Southern Switzerland University of Applied Sciences (IST-SUPSI) [3] to supply a system for supporting the management, alerting and intervention in the area. The system, that was originally created about 15 year ago, includes: 1. the management of the regional hydro-meteorological monitoring network, 2. the Lake Maggiore basins hydrological modelling, 3. the management of geoinformation that includes exposed and contextual elements and, 4. the provision of a Web platform for access and interact with the information. In the last years, the IST-SUPSI has undertaken a process of renewal of the entire system following the concept of interoperability as identified in recently conducted European projects like SANY [4] or TRIDEC [5]. This mainstream leads us to adopt different open standards and to develop ad-hoc software. At the present time, the renewal process is almost finished: the Web interface is the only component currently under upgrade. As a result today the IST-SUPSI offers: - a Sensor Observation Service (SOS) for the monitoring data and has developed his own SOS implementation (istSOS [6]) capable to satisfy all the requirements identified in over 20 year of hydro-meteorological data management; - Web Processing Services (WPS) for the elaboration of raw monitoring data (from the SOS) and meteorological forecasts to feed the hydrological model with costumized and real-time inputs; - Web Mapping Service (WMS) and Web Feature Service (WFS) for the visualization of exposed elements and base maps; - a RESTFul Web Services for the provision of all the civil protection information management and elaboration of specific requests; - a security system for authentication and authorization

  3. Standard Format for Chromatographic-polarimetric System small samples assessment

    International Nuclear Information System (INIS)

    Naranjo, S.; Fajer, V.; Fonfria, C.; Patinno, R.

    2012-01-01

    The treatment of samples containing optically active substances to be evaluated as part of quality control of raw material entering industrial process, and also during the modifications exerted on it to obtain the desired final composition is still and unsolved problem for many industries. That is the case of sugarcane industry. Sometimes the troubles implied are enlarged because samples to be evaluated are not bigger than one milliliter. Reduction of gel beds in G-10 and G-50 chromatographic columns having an inner diameter of 16 mm, instead of 25, and bed heights adjustable to requirements by means of sliding stoppers to increase analytical power were evaluated with glucose and sucrose standards in concentrations from 1 to 10 g/dL, using aliquots of 1 ml without undesirable dilutions that could affect either detection or chromatographic profile. Assays with seaweed extracts gave good results that are shown. It is established the advantage to know concentration of a separated substance by the height of its peak and the savings in time and reagents resulting . Sample expanded uncertainty in both systems is compared. It is also presented several programs for data acquisition, storing and processing. (Author)

  4. Risk in Management Systems according to ISO standard

    Directory of Open Access Journals (Sweden)

    P. Królas

    2010-07-01

    Full Text Available The purpose of this article was to present selected management standards in context of risk management. It presents main ISOmanagement standards (ISO 9001, ISO 14001, OHSAS 18001, ISO 27001, BS 25999, ISO 31000 that apply to polish enterprises. In thefirst part of this article there are analyzed management standards regarding quality, environment, occupational health and safety,information security, as well as business continuity management and risk management. The second part of the article discusses the processof dealing with risk based on chosen management standard.

  5. Business transactions and standards. Towards a system of concepts and a method for early problem identification in standard implementation projects

    NARCIS (Netherlands)

    Rukanova, B.D.

    2005-01-01

    To summarize, with respect to research question one we constructed a system of concepts, while in answer to research question two we proposed a method of how to apply this system of concepts in practice in order to identify potential problems in early stages of standard implementation projects.

  6. 75 FR 15620 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2010-03-30

    ... [Docket No. NHTSA 2009-0175] RIN 2127-AK62 Federal Motor Vehicle Safety Standards; Air Brake Systems... Federal motor vehicle safety standard for air brake systems by requiring substantial improvements in... Federal Motor Vehicle Safety Standard (FMVSS) No. 121, Air Brake Systems, to require improved stopping...

  7. 20 CFR 627.425 - Standards for financial management and participant data systems.

    Science.gov (United States)

    2010-04-01

    ... Administrative Standards § 627.425 Standards for financial management and participant data systems. (a)(1) General. The financial management system and the participant data system of each recipient and... the financial management system and participant data system of any recipient/subrecipient as part of a...

  8. [Expert investigation on food safety standard system framework construction in China].

    Science.gov (United States)

    He, Xiang; Yan, Weixing; Fan, Yongxiang; Zeng, Biao; Peng, Zhen; Sun, Zhenqiu

    2013-09-01

    Through investigating food safety standard framework among food safety experts, to summarize the basic elements and principles of food safety standard system, and provide policy advices for food safety standards framework. A survey was carried out among 415 experts from government, professional institutions and the food industry/enterprises using the National Food Safety Standard System Construction Consultation Questionnaire designed in the name of the Secretariat of National Food Safety Standard Committee. Experts have different advices in each group about the principles of food product standards, food additive product standards, food related product standards, hygienic practice, test methods. According to the results, the best solution not only may reflect experts awareness of the work of food safety standards situation, but also provide advices for setting and revision of food safety standards for the next. Through experts investigation, the framework and guiding principles of food safety standard had been built.

  9. CEN standards for solar thermal systems - State of the art and expectted impact

    NARCIS (Netherlands)

    Ree, B.G.C. van der; Pauschinger, Th.

    1996-01-01

    Since 1994, the European Committee for Standardization (CEN) Technical Committee TC 312 has been active in producing European Standards for thermal solar energy systems and components. In this paper, an overview of the present State of the Art of the draft standards is presented. These standards

  10. Federal Aviation Administration's Standard Terminal Automation Replacement System (STARS)

    Science.gov (United States)

    1997-11-17

    On October 30, 1997, at a hearing of the Subcommittee on Transportation and Related Agencies, Committee on Appropriations, U.S. House of Representatives, OIG provided their observations on the Federal Aviation Administration's (FAA) Standard Terminal...

  11. 49 CFR 571.121 - Standard No. 121; Air brake systems.

    Science.gov (United States)

    2010-10-01

    ... Motor Vehicle Safety Standards § 571.121 Standard No. 121; Air brake systems. S1. Scope. This standard establishes performance and equipment requirements for braking systems on vehicles equipped with air brake... compressed air or vacuum only to assist the driver in applying muscular force to hydraulic or mechanical...

  12. System 80+{trademark} Standard Design: CESSAR design certification. Volume 2: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 2, in conjunction with Volume 3, provides the design of structures, components, equipment and systems.

  13. Are Standards-Based Quality Systems a Threat to the Internationalization of Teaching and Learning?

    Science.gov (United States)

    Thompson-Whiteside, Scott

    2013-01-01

    This paper explores the current shift in Australia's higher education system moving to a more explicit, standards-based quality system and its potential impact on international partnerships in teaching and learning, particularly in Asia. The new Tertiary Education Quality and Standards Agency and the underlying Higher Education Standards Framework…

  14. System 80+{trademark} Standard Design: CESSAR design certification. Volume 9: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 9 discusses Electric Power and Auxiliary Systems.

  15. 75 FR 78269 - Vehicular Digital Multimedia Evidence Recording System (VDMERS) Standard for Law Enforcement

    Science.gov (United States)

    2010-12-15

    ... of Justice Programs Vehicular Digital Multimedia Evidence Recording System (VDMERS) Standard for Law... the general public the draft ``Vehicular Digital Multimedia Evidence Recording System Standard for Law Enforcement.'' The opportunity to provide comments on this voluntary standard is open to industry technical...

  16. 24 CFR 200.950 - Building product standards and certification program for solar water heating system.

    Science.gov (United States)

    2010-04-01

    ... certification program for solar water heating system. 200.950 Section 200.950 Housing and Urban Development... solar water heating system. (a) Applicable standards. (1) All solar water heating systems shall be...) Document OG-300-93, Operating Guidelines and Minimum Standards for Certifying Solar Water Heating Systems...

  17. The simulation of CAMAC system based on Windows API

    International Nuclear Information System (INIS)

    Li Lei; Song Yushou; Xi Yinyin; Yan Qiang; Liu Huilan; Li Taosheng

    2012-01-01

    Based on Windows API, a kind of design method to simulate the CAMAC System, which is commonly used in nuclear physics experiments, is developed. Using C++ object-oriented programming, the simulation is carried out in the environment of Visual Studio 2010 and the interfaces, the data-way, the control commands and the modules are simulated with the functions either user-defined or from Windows API. Applying this method, the amplifier plug AMP575A produced by ORTEC is simulated and performance experiments are studied for this simulation module. The results indicate that the simulation module can fulfill the function of pole-zero adjustment, which means this method is competent for the simulation of CAMAC System. Compared with the simulation based on LabVIEW, this way is more flexible and closer to the bottom of the system. All the works above have found a path to making the virtual instrument platform based on CAMAC system. (authors)

  18. Large capacity, high-speed multiparameter multichannel analysis system

    International Nuclear Information System (INIS)

    Hendricks, R.W.; Seeger, P.A.; Scheer, J.W.; Suehiro, S.

    1980-01-01

    A data acquisition system for recording multiparameter digital data into a large memory array at over 2.5 MHz is described. The system consists of a MOSTEK MK8600 2048K x 24-bit memory system, I/O ports to various external devices including the CAMAC dataway, a memory incrementer/adder and a daisy-chain of experiment-specific modules which calculate the memory address which is to be incremented. The design of the daisy-chain permits multiple modules and provides for easy modification as experimental needs change. The system has been designed for use in multiparameter, multichannel analysis of high-speed data gathered by position-sensitive detectors at conventional and synchrotron x-ray sources as well as for fixed energy and time-of-flight diffraction at continuous and pulsed neutron sources

  19. System 80+{trademark} standard design: CESSAR design certification. Volume 5: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report has been prepared in support of the industry effort to standardize nuclear plant designs. The documents in this series describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design.

  20. Measuring enzyme activities under standardized in vivo-like conditions for Systems Biology

    NARCIS (Netherlands)

    van Eunen, K.; Bouwman, J.; Daran-Lapujade, P.A.L.; Postmus, J.; Canelas, A.; Mensonides, F.I.C.; Orij, R.; Tuzun, I.; van der Brink, J.; Smits, G.J.; van Gulik, W.M.; Brul, S.; Heijnen, J.J.; de Winde, J.H.; Teixeira de Mattos, M.J.; Kettner, C.; Nielsen, J.; Westerhoff, H.V.; Bakker, B.M.

    2010-01-01

    Realistic quantitative models require data from many laboratories. Therefore, standardization of experimental systems and assay conditions is crucial. Moreover, standards should be representative of the in vivo conditions. However, most often, enzyme-kinetic parameters are measured under assay

  1. Measuring enzyme activities under standardized in vivo-like conditions for systems biology

    NARCIS (Netherlands)

    van Eunen, Karen; Bouwman, Jildau; Daran-Lapujade, Pascale; Postmus, Jarne; Canelas, Andre B.; Mensonides, Femke I. C.; Orij, Rick; Tuzun, Isil; van den Brink, Joost; Smits, Gertien J.; van Gulik, Walter M.; Brul, Stanley; de Winde, Johannes H.; de Mattos, M. J. Teixeira; Kettner, Carsten; Nielsen, Jens; Westerhoff, Hans V.; Bakker, Barbara M.; Heijnen, J.J.

    Realistic quantitative models require data from many laboratories. Therefore, standardization of experimental systems and assay conditions is crucial. Moreover, standards should be representative of the in vivo conditions. However, most often, enzyme-kinetic parameters are measured under assay

  2. 49 CFR 571.207 - Standard No. 207; Seating systems.

    Science.gov (United States)

    2010-10-01

    ... standard establishes requirements for seats, their attachment assemblies, and their installation to....2. General performance requirements. When tested in accordance with S5, each occupant seat shall... than a school bus; a passenger seat on a school bus with a GVWR greater than 4,536 kilograms (10,000...

  3. 75 FR 35689 - System Personnel Training Reliability Standards

    Science.gov (United States)

    2010-06-23

    ... nomograms for real-time operations; (4) use a Systematic Approach to Training methodology for developing new...) incorporate a Systematic Approach to Training methodology in the development of training programs; and (5... proposed changes to the training standard on many issues, including: (1) The Systematic Approach to...

  4. Future Standardization of Space Telecommunications Radio System with Core Flight System

    Science.gov (United States)

    Briones, Janette C.; Hickey, Joseph P.; Roche, Rigoberto; Handler, Louis M.; Hall, Charles S.

    2016-01-01

    NASA Glenn Research Center (GRC) is integrating the NASA Space Telecommunications Radio System (STRS) Standard with the Core Flight System (cFS), an avionics software operating environment. The STRS standard provides a common, consistent framework to develop, qualify, operate and maintain complex, reconfigurable and reprogrammable radio systems. The cFS is a flexible, open architecture that features a plugand- play software executive called the Core Flight Executive (cFE), a reusable library of software components for flight and space missions and an integrated tool suite. Together, STRS and cFS create a development environment that allows for STRS compliant applications to reference the STRS application programmer interfaces (APIs) that use the cFS infrastructure. These APIs are used to standardize the communication protocols on NASAs space SDRs. The cFS-STRS Operating Environment (OE) is a portable cFS library, which adds the ability to run STRS applications on existing cFS platforms. The purpose of this paper is to discuss the cFS-STRS OE prototype, preliminary experimental results performed using the Advanced Space Radio Platform (ASRP), the GRC S- band Ground Station and the SCaN (Space Communication and Navigation) Testbed currently flying onboard the International Space Station (ISS). Additionally, this paper presents a demonstration of the Consultative Committee for Space Data Systems (CCSDS) Spacecraft Onboard Interface Services (SOIS) using electronic data sheets (EDS) inside cFE. This configuration allows for the data sheets to specify binary formats for data exchange between STRS applications. The integration of STRS with cFS leverages mission-proven platform functions and mitigates barriers to integration with future missions. This reduces flight software development time and the costs of software-defined radio (SDR) platforms. Furthermore, the combined benefits of STRS standardization with the flexibility of cFS provide an effective, reliable and

  5. Fault detection for nonlinear systems - A standard problem approach

    DEFF Research Database (Denmark)

    Stoustrup, Jakob; Niemann, Hans Henrik

    1998-01-01

    The paper describes a general method for designing (nonlinear) fault detection and isolation (FDI) systems for nonlinear processes. For a rich class of nonlinear systems, a nonlinear FDI system can be designed using convex optimization procedures. The proposed method is a natural extension of met...

  6. Development of the control systems in the IYaF

    International Nuclear Information System (INIS)

    Nifontov, V.I.

    1981-01-01

    Development of the control systems (CS) storage rings in the IYaF SOAN USSR is described. The main CS characteristics and their main tasks are pointed out. The general tendency in the choice of the CS structure is outlined at present. It includes application of the module KAMAK structure in the equipment part, use of the SM-4 or the ''Electronica 100'' type computers as the central computers and application of the ''Electronica-60'' type mini-computer at the lower level for connection with the equipment. Some difficulties and problems in development of the system units, in development of a new and use of the present software are noted. Development of the consequent KAMAK dataway in combination with intracrate interaction by an additional line is planned for the solution of the problems of system module unification in the SR, increase of SR efficiency and reliability [ru

  7. STANDARDS IN CONTROL AND PROTECTION TEHNOLOGY FOR ELECTRIC POWER SYSTEMS

    OpenAIRE

    Daniel COSTIANU; Nicoleta ARGHIRA; Ioana FĂGĂRĂŞAN; Sergiu St. ILIESCU

    2008-01-01

    The features of the standard IEC 16850 with respect to intelligent applications in substations are summarized. It is shown how modeling of functions independently from its allocation to devices allows optimizing existing applications and opening up for future intelligent applications. The data model provides all information in a substation needed not only for control and protection functions but also about the IEDs and the switchgear configuration.

  8. Analysis of China's radiation environment monitoring standard system

    International Nuclear Information System (INIS)

    Lu Weiwei; Yue Huiguo; Yuan Zhilun; Yu Zhengwei; Huang Donghui; Wu Yongle

    2014-01-01

    In order to establish and improve the radiation environment monitoring standard system, to provide technical support for the radiation environment monitoring system, this work first retrieve the radiation environment monitoring standards, and clear the domestic status of the radiation environment monitoring standards. According to the Environmental Protection issued by the Ministry of the radiation environment monitoring technology specification '(HJ/T 61-2001), the radiation environment monitoring program (Provisional)' (Central Office (2003) No.56), and the radiation environment monitoring capacity assessment program (Environmental Protection management Division of the Department of nuclear safety, January 2011), environmental Protection Department of the relevant documents and other relevant information, the radiation environment monitoring standards and methods have been accessed, to find the missing items and issues proposed revision of the system requirements. Summarizing radiation environment monitoring national standards, standards of environmental protection industry, the nuclear industry standard, there are 28 standard missing items need to the health industry standards, inspection and quarantine industry standards, a total of 145 of these standards of environmental radiation monitoring, radiation monitoring of pollution sources, emergency response and early warning and monitoring from a management and technology meet the basic needs of the radiation environment monitoring. Research found that the standards in the revised 57 and in the formulation of 47, develop. After the revision of China's standards system will be further improved. The radiation environment monitoring work will be further strengthened. (authors)

  9. Standardized and modular microfluidic platform for fast lab on chip system development

    NARCIS (Netherlands)

    Dekker, Stefan; van den Berg, Albert; Odijk, Mathieu; Lee, Abraham; DeVoe, Don

    2017-01-01

    This paper reports a modular microfluidic system with standardized parts, enabling rapid prototyping of lab on chip systems. Herewith contributing to the technology transfer from academy to industry. The use of standardized parts also makes it possible to design a microfluidic systems in a top down

  10. 78 FR 73112 - Monitoring System Conditions-Transmission Operations Reliability Standards; Interconnection...

    Science.gov (United States)

    2013-12-05

    ... complement the TOP Standards, have the goal of ensuring that the bulk electric system is planned and operated... pertain to the coordinated efforts to operate the bulk electric system in a reliable manner during real... System Operating Limits (SOLs).\\5\\ The provisions in the proposed TOP Reliability Standards that require...

  11. 36 CFR 64.12 - Standards for grantee financial management systems.

    Science.gov (United States)

    2010-07-01

    ... financial management systems. 64.12 Section 64.12 Parks, Forests, and Public Property NATIONAL PARK SERVICE... RIGHTS-OF-WAY § 64.12 Standards for grantee financial management systems. The grantees' Financial Management Systems shall meet the minimum standards set forth in OMB Circular A-102, Attachment G. ...

  12. Standard practice for classification of computed radiology systems

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 This practice describes the evaluation and classification of a computed radiography (CR) system, a particular phosphor imaging plate (IP), system scanner and software, in combination with specified metal screens for industrial radiography. It is intended to ensure that the evaluation of image quality, as far as this is influenced by the scanner/IP system, meets the needs of users. 1.2 The practice defines system tests to be used to classify the systems of different suppliers and make them comparable for users. 1.3 The CR system performance is described by signal and noise parameters. For film systems, the signal is represented by gradient and the noise by granularity. The signal-to-noise ratio is normalized by the basic spatial resolution of the system and is part of classification. The normalization is given by the scanning aperture of 100 µm diameter for the micro-photometer, which is defined in Test Method E1815 for film system classification. This practice describes how the parameters shall be meas...

  13. Technical Standards for Command and Control Information Systems (CCISs)

    Science.gov (United States)

    1992-01-01

    network. There is a perceived requirement for an ultimate delivery capability, whereby important communications are sustained , even at very low data...Transfer Layer in RTTS developed in France for use in LANs (see Section 15.4.4) [Ref. GAM 1987]. XTP is designed to support 100 Mbps sustained transfer...10746-2U_____ Fmeo for OOP standards WD 10748-3 ___ User %*IQ W 10746-4 Architectura semantics. formalismns W 04- Key: E3 v 015I EM o/CD U ISO G-4

  14. Assessment of Offshore Wind System Design, Safety, and Operation Standards

    Energy Technology Data Exchange (ETDEWEB)

    Sirnivas, Senu [National Renewable Energy Lab. (NREL), Golden, CO (United States); Musial, Walt [National Renewable Energy Lab. (NREL), Golden, CO (United States); Bailey, Bruce [AWS Trupower LLC, Albany, NY (United States); Filippelli, Matthew [AWS Trupower LLC, Albany, NY (United States)

    2014-01-01

    This report is a deliverable for a project sponsored by the U.S. Department of Energy (DOE) entitled National Offshore Wind Energy Resource and Design Data Campaign -- Analysis and Collaboration (contract number DE-EE0005372; prime contractor -- AWS Truepower). The project objective is to supplement, facilitate, and enhance ongoing multiagency efforts to develop an integrated national offshore wind energy data network. The results of this initiative are intended to 1) produce a comprehensive definition of relevant met-ocean resource assets and needs and design standards, and 2) provide a basis for recommendations for meeting offshore wind energy industry data and design certification requirements.

  15. 38 CFR 43.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... management systems. 43.20 Section 43.20 Pensions, Bonuses, and Veterans' Relief DEPARTMENT OF VETERANS... management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and accounting procedures of the...

  16. 40 CFR 31.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and accounting procedures of the... violation of the restrictions and prohibitions of applicable statutes. (b) The financial management systems...

  17. 36 CFR 1207.20 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... management systems. 1207.20 Section 1207.20 Parks, Forests, and Public Property NATIONAL ARCHIVES AND RECORDS... financial management systems. (a) A State must expand and account for grant funds in accordance with State laws and procedures for expending and accounting for its own funds. Fiscal control and accounting...

  18. 40 CFR 63.445 - Standards for the bleaching system.

    Science.gov (United States)

    2010-07-01

    ...) Bleaching systems bleaching pulp from kraft, sulfite, or soda pulping processes that use any chlorinated compounds; or (3) Bleaching systems bleaching pulp from mechanical pulping processes using wood or from any process using secondary or non-wood fibers, that use chlorine dioxide. (b) The equipment at each bleaching...

  19. Open Architecture, Standards and Information Systems (OASIS) for ...

    International Development Research Centre (IDRC) Digital Library (Canada)

    This project will help African countries develop and maintain low-cost sustainable health information systems, and use the information systems to address health ... of experts in medical informatics and computing; and a methodology for leveraging open source software and techniques for improved health data management.

  20. Trust Management in P2P systems using Standard TuLiP

    NARCIS (Netherlands)

    Czenko, M.R.; Doumen, J.M.; Etalle, Sandro

    2008-01-01

    In this paper we introduce Standard TuLiP - a new logic based Trust Management system. In Standard TuLiP, security decisions are based on security credentials, which can be issued by different entities and stored at different locations. Standard TuLiP directly supports the distributed credential

  1. Standardization of education as essential to the development of regional educational systems

    Directory of Open Access Journals (Sweden)

    Shevchuk Andrey

    2013-01-01

    Full Text Available The problematic aspects of the current educational standards in Ukraine as important legal instruments of regional educational systems were viewed. The regulated areas of education standards in Ukraine and the traditional approach based on the identified areas of their innovative changes where described. The main directions of innovation education standards depending on their subject focus where systemised.

  2. System 80+{trademark} Standard Design: CESSAR design certification. Volume 16: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80+{trademark} Standard Design. This Volume 16 details the application of Human Factors Engineering in the design process.

  3. System 80+{trademark} Standard Design: CESSAR design certification. Volume 8: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 8 provides a description of instrumentation and controls.

  4. System 80+{trademark} Standard Design: CESSAR design certification. Volume 11: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report -- Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These volumes describe the Combustion Engineering, Inc. System 80{sup +}{trademark} Standard Design. This volume 11 discusses Radiation Protection, Conduct of Operations, and the Initial Test Program.

  5. System 80+{trademark} Standard Design: CESSAR design certification. Volume 4: Amendment I

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-21

    This report, entitled Combustion Engineering Standard Safety Analysis Report - Design Certification (CESSAR-DC), has been prepared in support of the industry effort to standardize nuclear plant designs. These documents describe the Combustion Engineering, Inc. System 80+{sup TM} Standard Design. This report, Volume 4, provides a description of the reactor, reactor internals, fuel assemblies, and associated design requirements.

  6. Trust Management in P2P Systems Using Standard TuLiP

    NARCIS (Netherlands)

    Czenko, M.R.; Doumen, J.M.; Etalle, Sandro

    2008-01-01

    In this paper we introduce Standard TuLiP - a new logic based Trust Management system. In Standard TuLiP, security decisions are based on security credentials, which can be issued by different entities and stored at different locations. Standard TuLiP directly supports the distributed credential

  7. Supplementary shutdown system of 220 MWe standard PHWR in India

    International Nuclear Information System (INIS)

    Muktibodh, U.C.

    1997-01-01

    The design objective of the shutdown system is to make the reactor subcritical and hold it in that state for an extended period of time. This objective must be realised under all anticipated operational occurrences and postulated abnormal conditions even during most reactive state of the core. PHWR design criteria for shutdown stipulates requirement of two independent diverse and fast acting shutdown systems, either of which acting alone should meet the above objectives. This requirement would normally call for a large number of reactivity mechanism penetrations into the calandria. From the point of view of space availability at the reactivity mechanism area on top of calandria, for the relatively small core of 220 MWe PHWRs, and ease of maintenance realisation of the total worth by either of the shutdown systems acting alone was difficult. To overcome this engineering constraint and at the same time to satisfy the design criteria, a unique approach to meet the reactivity demands for shutdown was adopted. The reactivity requirements of the shutdown consists of fast and slow reactivity changes. For the shutdown system of 220 MWe PHWRs, the approach of realizing fast reactivity changes with dual redundant, diverse, fast acting shutdown systems aided by a slow acting shutdown system to counter delayed reactivity changes was conceived. The supplementary slow acting shutdown system is called upon to act after actuation of either of the two redundant fast acting systems and is referred to as Liquid Poison Injection System (LPIS). The system adds bulk amount of neutron poison (boric acid), equivalent to 45 mk, directly into the moderator through two nozzles in calandria using pneumatic pressure. This paper describes the design of LPIS as envisaged for the standardised 220 MWe PHWRs. (author)

  8. Nantenna for Standard 1550 nm Optical Communication Systems

    Directory of Open Access Journals (Sweden)

    Waleed Tariq Sethi

    2016-01-01

    Full Text Available Nanoscale transmission and reception technologies will play a vital role and be part of the next generation communication networks. This applies for all application fields including imaging, health, biosensing, civilian, and military communications. The detection of light frequency using nanooptical antennas may possibly become a good competitor to the semiconductor based photodetector because of the simplicity of integration, cost, and inherent capability to detect the phase and amplitude instead of power only. In this paper, authors propose simulated design of a hexagonal dielectric loaded nantenna (HDLN and explore its potential benefits at the standard optical C-band (1550 nm. The proposed nantenna consists of “Ag-SiO2-Ag” structure, consisting of “Si” hexagonal dielectric with equal lengths fed by “Ag” nanostrip transmission line. The simulated nantenna achieves an impedance bandwidth of 3.7% (190.9 THz–198.1 THz and a directivity of 8.6 dBi, at a center frequency of 193.5 THz, covering most of the ITU-T standard optical transmission window (C-band. The hexagonal dielectric nantenna produces HE20δ modes and the wave propagation is found to be end-fire. The efficiency of the nantenna is proven via numerical expressions, thus making the proposed design viable for nanonetwork communications.

  9. Safety Standard for Oxygen and Oxygen Systems: Guidelines for Oxygen System Design, Materials Selection, Operations, Storage, and Transportation

    Science.gov (United States)

    1996-01-01

    NASA's standard for oxygen system design, materials selection, operation, and transportation is presented. Minimum guidelines applicable to NASA Headquarters and all NASA Field Installations are contained.

  10. NASA's Earth Science Data Systems Standards Endorsement Process

    National Research Council Canada - National Science Library

    Ullman, Richard E; Enloe, Yonsook

    2005-01-01

    Starting in January 2004, NASA instituted a set of internal working groups to develop ongoing recommendations for the continuing broad evolution of Earth Science Data Systems development and management within NASA...

  11. Specifications of Standards in Systems and Synthetic Biology: Status and Developments in 2017.

    Science.gov (United States)

    Schreiber, Falk; Bader, Gary D; Gleeson, Padraig; Golebiewski, Martin; Hucka, Michael; Keating, Sarah M; Novère, Nicolas Le; Myers, Chris; Nickerson, David; Sommer, Björn; Waltemath, Dagmar

    2018-03-29

    Standards are essential to the advancement of Systems and Synthetic Biology. COMBINE provides a formal body and a centralised platform to help develop and disseminate relevant standards and related resources. The regular special issue of the Journal of Integrative Bioinformatics aims to support the exchange, distribution and archiving of these standards by providing unified, easily citable access. This paper provides an overview of existing COMBINE standards and presents developments of the last year.

  12. The Weighted Airman Promotion System: Standardizing Test Scores

    Science.gov (United States)

    2008-01-01

    u th o ri ze d Top 3/E6 ratio, inventory 1401206040 100 70 130 5R 2F 2G 3N 2M 2A 4J 4C 4P 4T 4B 1W 2T 3P 1T 4A 2S 5J 1A 1S1C 6F 4N 7S 4R 4E 1N 3A 3V...Costs If the Air Force decided to standardize test scores, there would be three basic types of costs: implementation costs, marketing costs, and...analytical costs for this more deliberate approach could be three to four person-years. It would be appropriate for the Air Force to market any

  13. THE IAS/IFRS STANDARDS SYSTEM BETWEEN HARMONIZATION AND DEFORMITY

    Directory of Open Access Journals (Sweden)

    Mates Dorel

    2010-12-01

    Full Text Available The development of competition, the globalization and the growth and integration of the capital markets require comparable accounting information based on superior- quality standards, an accounting information to consolidate and not to obstruct the global efficiency of the market .The obligatory adoption of the current IAS/IFRS norms for the creation of the financial statements of the European companies- and especially of the listed ones- are a necessary step for the full integration of the financial markets of EU member state. The 4th and 7th CE directives contributed to the harmonization of the base accounting information of the stock companies, determining a general improvement of the European accounting norms quality, and this due to the greater comparability of the companies account, which eased the activity of the trans-border companies.

  14. A modular cloning system for standardized assembly of multigene constructs.

    Directory of Open Access Journals (Sweden)

    Ernst Weber

    Full Text Available The field of synthetic biology promises to revolutionize biotechnology through the design of organisms with novel phenotypes useful for medicine, agriculture and industry. However, a limiting factor is the ability of current methods to assemble complex DNA molecules encoding multiple genetic elements in various predefined arrangements. We present here a hierarchical modular cloning system that allows the creation at will and with high efficiency of any eukaryotic multigene construct, starting from libraries of defined and validated basic modules containing regulatory and coding sequences. This system is based on the ability of type IIS restriction enzymes to assemble multiple DNA fragments in a defined linear order. We constructed a 33 kb DNA molecule containing 11 transcription units made from 44 individual basic modules in only three successive cloning steps. This modular cloning (MoClo system can be readily automated and will be extremely useful for applications such as gene stacking and metabolic engineering.

  15. High Efficiency Three Phase Resonant Conversion for Standardized Architecture Power System Applications, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — A low-cost, standardized-architecture power system is proposed for NASA electric propulsion (EP) applications. Three approaches are combined to develop a system that...

  16. High Efficiency Three Phase Resonant Conversion for Standardized Architecture Power System Applications, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — A low-cost, standardized-architecture power system is proposed for NASA electric propulsion (EP) applications. Three approaches are combined to develop a system that...

  17. Standardization of computer systems for logging operative cases.

    Science.gov (United States)

    Feldman, M D; Lowry, L D; Wisnicki, H J

    1988-10-01

    With the advent of extremely rapid, powerful, compact, and inexpensive microcomputers, a revolution in data manipulation is ongoing. We have customized and used for over two years prepackaged software to track residents' operative experiences in the Department of Otolaryngology at Jefferson Medical College of Thomas Jefferson University, Philadelphia. An attempt is presently being made to develop a similar system that might be utilized by all otolaryngology teaching programs and thus enable the collection and review of residents' operative experiences nationally. A basic, relational database system is proposed for entering resident caseload data and generating reports for periodic review.

  18. Executive overview and introduction to the SMAP information system life-cycle and documentation standards

    Science.gov (United States)

    1989-01-01

    An overview of the five volume set of Information System Life-Cycle and Documentation Standards is provided with information on its use. The overview covers description, objectives, key definitions, structure and application of the standards, and document structure decisions. These standards were created to provide consistent NASA-wide structures for coordinating, controlling, and documenting the engineering of an information system (hardware, software, and operational procedures components) phase by phase.

  19. 41 CFR 105-72.301 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Standards for financial... Management § 105-72.301 Standards for financial management systems. (a) Federal awarding agencies shall... practical. (b) Recipients' financial management systems shall provide for the following. (1) Accurate...

  20. 77 FR 30765 - Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles

    Science.gov (United States)

    2012-05-23

    ... Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles; Proposed Rule #0;#0;Federal Register / Vol. 77 , No. 100 / Wednesday... Vehicle Safety Standards; Electronic Stability Control Systems for Heavy Vehicles AGENCY: National Highway...

  1. 76 FR 22919 - National Institute of Justice Offender Tracking System Standard Workshop

    Science.gov (United States)

    2011-04-25

    ... of Justice Programs National Institute of Justice Offender Tracking System Standard Workshop AGENCY... Workshop. SUMMARY: The National Institute of Justice (NIJ) is hosting an Officer Tracking System Standard Workshop specifically to introduce manufacturers, certification bodies and test laboratories to the new...

  2. 76 FR 44829 - Federal Motor Vehicle Safety Standards; Air Brake Systems

    Science.gov (United States)

    2011-07-27

    ... [Docket No. NHTSA-2009-0175] RIN 2127-AK84 Federal Motor Vehicle Safety Standards; Air Brake Systems... final rule that amended the Federal motor vehicle safety standard for air brake systems by requiring... July 27, 2009, NHTSA published a final rule in the Federal Register amending Federal Motor Vehicle...

  3. 40 CFR 60.482-5 - Standards: Sampling connection systems.

    Science.gov (United States)

    2010-07-01

    ... process fluid to any of the following systems or facilities: (A) A waste management unit as defined in § 63.111, if the waste management unit is subject to and operated in compliance with the provisions of..., licensed, or registered by a state to manage municipal or industrial solid waste, if the process fluids are...

  4. Implementation of IEC Standard Models for Power System Stability Studies

    DEFF Research Database (Denmark)

    Margaris, Ioannis; Hansen, Anca Daniela; Bech, John

    2012-01-01

    , namely a model for a variable speed wind turbine with full scale power converter WTG including a 2- mass mechanical model. The generic models for fixed and variable speed WTGs models are suitable for fundamental frequency positive sequence response simulations during short events in the power system...

  5. An Architecture for Nested Transaction Support on Standard Database Systems

    NARCIS (Netherlands)

    Boertjes, E.M.; Grefen, P.W.P.J.; Vonk, J.; Apers, Peter M.G.

    Many applications dealing with complex processes require database support for nested transactions. Current commercial database systems lack this kind of support, offering flat, non-nested transactions only. This paper presents a three-layer architecture for implementing nested transaction support on

  6. Bioelectrochemical Systems Workshop:Standardized Analyses, Design Benchmarks, and Reporting

    Science.gov (United States)

    2012-01-01

    State University; Ms. Caroline Dale, Veolia Water Systems in USA; Dr. Pat Evans, CDM; Dr. Ashley Franks, University of Massachusetts / Latrobe University...generation using membrane and salt bridge microbial fuel cells. Water Research, 2005. 39(9): p. 1675-1686. 3. Logan, B.E., Scaling Up Microbial Fuel... Water Research, 2012. 46: p. 2425-2434. 17. Zhang, G.D., et al., Biocathode microbial fuel cell for efficient electricity recovery from dairy manure

  7. Standard Hydrogen Monitoring System-C operation and maintenance manual

    International Nuclear Information System (INIS)

    Schneider, T.C.

    1997-01-01

    The primary function of the SHMS-C is to monitor specifically for hydrogen in the waste tank vapor space which may also contain (but not be limited to) unknown quantities of air, nitrous oxide (N 2 O), ammonia (NH 3 ), water vapor, carbon dioxide (CO 2 ), carbon monoxide (CO) and other gaseous constituents. An electronically controlled grab sampler has replaced the manually operated sample system that was used in the original SHMS enclosure. Samples can now be operator or automatically initiated. Automatic initiation occurs based on the high hydrogen alarm level. Once a sample is obtained it is removed from the sampler and transported to a laboratory for analysis. This system is used to identify other gaseous constituents which are not measured by the hydrogen monitor. The design does not include any remote data acquisition or remote data logging equipment but provides a 4--20 mA dc process signals, and discrete alarm contacts, that can be utilized for remote data logging and alarming when desired. The SHMS-C arrangement consists of design modifications (piping, valves, filters, supports) to the SHMS-B arrangement necessary for the installation of a dual column gas chromatograph and associated sample and calibration gas lines. The gas chromatograph will provide real time, analytical quality, specific hydrogen measurements in low and medium range concentrations. The system is designed to sample process gases that are classified by NEC code as Class 1, Division 1, Group B

  8. EXPERIENCE OF IMPLEMENTATION OF THE LABOR PROTECTION CONTROL SYSTEM AT RUP «BMZ» IN ACCORDANCE WITH INTERNATIONAL STANDARDS OHSAS 180001 AND STATE STANDARD STB 18001

    Directory of Open Access Journals (Sweden)

    I. N. Zhuk

    2010-01-01

    Full Text Available Experience of introduction of the control system by labour protection at RUP «BMZ» in accordance with international standard OHSAS 18001 and State standard STB 18001 is described.

  9. [Discussion on research thinking of traditional Chinese medicine standardization system based on whole process quality control].

    Science.gov (United States)

    Dong, Ling; Sun, Yu; Pei, Wen-Xuan; Dai, Jun-Dong; Wang, Zi-Yu; Pan, Meng; Chen, Jiang-Peng; Wang, Yun

    2017-12-01

    The concept of "Quality by design" indicates that good design for the whole life cycle of pharmaceutical production enables the drug to meet the expected quality requirements. Aiming at the existing problems of the traditional Chinese medicine (TCM) industry, the TCM standardization system was put forward in this paper from the national strategic level, under the guidance by the idea of quality control in international manufacturing industry and with considerations of TCM industry's own characteristics and development status. The connotation of this strategy was to establish five interrelated systems: multi-indicators system based on tri-indicators system, quality standard and specification system of TCM herbal materials and decoction pieces, quality traceability system, data monitoring system based on whole-process quality control, and whole-process quality management system of TCM, and achieve the whole process systematic and scientific study in TCM industry through "top-level design-implement in steps-system integration" workflow. This article analyzed the correlation between the quality standards of all links, established standard operating procedures of each link and whole process, and constructed a high standard overall quality management system for TCM industry chains, in order to provide a demonstration for the establishment of TCM whole-process quality control system and provide systematic reference and basis for standardization strategy in TCM industry. Copyright© by the Chinese Pharmaceutical Association.

  10. Reducing barriers to interoperability through collaborative development of standards for Earth science information systems

    Science.gov (United States)

    Percivall, G. S.; Arctur, D. K.

    2010-12-01

    Increasingly, Earth science research must make effective use of interdisciplinary data sources and processes. Non-interoperability impedes sharing of data and computing resources. Standards from the Open Geospatial Consortium (OGC) and other organizations are the basis for successfully deploying a seamless, distributed information infrastructure for the geosciences. Collaborative development of the standards has proven effective in reducing barriers to standards adoption. Standards are the basis for the success of the Internet and the World Wide Web. A standard describes a set of rules that have been agreed to in some consensus forum, such as the Internet Engineering Task Force (IETF), the International Organization for Standardization (ISO), or the OGC. As described in The Importance of Going Open, “non-interoperability causes organizations to spend much more than necessary on geospatial information technology development”. In the context of e-Science, the National Science Foundation’s Cyberinfrastructure Council argues that “The use of standards creates economies of scale and scope for developing and deploying common resources, tools, software, and services that enhance the use of cyberinfrastructure in multiple science and engineering communities.” Barriers to adoption include misperceptions and misuse of standards. “Adhering to standards costs more” - typically this statement is made when a research program considers implementing standards as a one-time modification to an existing system. Multiple economic studies have shown lower development costs when using standards over the life of a project. “Standards stifle innovation” - a key decision in research is to consider what assumptions to consider fixed and what to challenge. The long history of standards in research, e.g., SI units, is fundamental to assessing repeatable results by independent researchers. Similar need for common standards exist in the information systems used for Earth

  11. Standardization of VSAT communication systems in the CCIR

    Science.gov (United States)

    Ito, Yasuhiko; Amadesi, Paolo

    1993-08-01

    This paper presents an overview of the CCIR Recommendations on VSAT systems. The first part presents the activities of the CCIR Task Group 4/2 which was created in 1990 and issued five Recommendations for VSAT earth-stations. These Recommendations specify the RF characteristics of the VSAT earth-stations and their maintenance functions. The TG 4/2 finished its task in 1991. The second part of this paper presents the activities of the CCIR Task Group 4/3 which was created in 1991 for the preparation of Recommendations on the connection of VSAT networks with the public switched networks. The activities of the TG 4/3 are still going on, and the Draft Recommendations will be formalized in two more meetings. The subjects of dicussion and the expected outcomes will be briefly presented.

  12. Product specification documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 3

    Science.gov (United States)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the third of five volumes on Information System Life-Cycle and Documentation Standards which present a well organized, easily used standard for providing technical information needed for developing information systems, components, and related processes. This volume states the Software Management and Assurance Program documentation standard for a product specification document and for data item descriptions. The framework can be applied to any NASA information system, software, hardware, operational procedures components, and related processes.

  13. [Wound information management system: a standardized scheme for acquisition, storage and management of wound information].

    Science.gov (United States)

    Liu, Hu; Su, Rong-jia; Wu, Min-jie; Zhang, Yi; Qiu, Xiang-jun; Feng, Jian-gang; Xie, Ting; Lu, Shu-liang

    2012-06-01

    To form a wound information management scheme with objectivity, standardization, and convenience by means of wound information management system. A wound information management system was set up with the acquisition terminal, the defined wound description, the data bank, and related softwares. The efficacy of this system was evaluated in clinical practice. The acquisition terminal was composed of the third generation mobile phone and the software. It was feasible to get access to the wound information, including description, image, and therapeutic plan from the data bank by mobile phone. During 4 months, a collection of a total of 232 wound treatment information was entered, and accordingly standardized data of 38 patients were formed automatically. This system can provide standardized wound information management by standardized techniques of acquisition, transmission, and storage of wound information. It can be used widely in hospitals, especially primary medical institutions. Data resource of the system makes it possible for epidemiological study with large sample size in future.

  14. Property, Plant and Equipment disclosure requirements and firm characteristics: the Portuguese Accounting Standardization System

    OpenAIRE

    Botelho, Rafaela; Azevedo, Graça; Costa, Alberto J.; Oliveira, Jonas

    2015-01-01

    In the new Portuguese accounting frame of reference (Portuguese Accounting Standardization System – Sistema de Normalização Contabilística), the issues related to Property, Plant and Equipment assets are dealt with in the Accounting and Financial Reporting Standard (Norma Contabilística de Relato Financeiro – NCRF) 7 (Property, Plant & Equipment). The present study intends to assess the degree of compliance with the disclosure requirements of this accounting standard by Portuguese unlisted co...

  15. Comparison of pituitary and recombinant human thyrotropin standards in an immunoradiometric system

    International Nuclear Information System (INIS)

    Blanca Fernandez, Silvia; Rodriguez Gonzalez, Julio Cesar; Nisembaum Alas, Amaparo; Sevy Gonzalez, O.

    1998-01-01

    Results of two standards of human thyrotropin of pituitaries (B) and recombinant (C) origen supplied by the Instituto of pesquisas Energeticas y Nucleares, Brazil, were compared in our immunoradiometric reference system that use an human thyrotropin pituitary standard of local production (A). This work was supported by the International Atomic Energy Agency for an inter-regional comparison and set up of a reference standard

  16. Detection of proximal caries with high-resolution and standard resolution digital radiographic systems

    NARCIS (Netherlands)

    Berkhout, W.E.R.; Verheij, H.G.C.; Syriopoulos, K.; Li, G.; Sanderink, G.C.H.; van der Stelt, P.F.

    2007-01-01

    Aims: The aim of this study was to: (1) compare the diagnostic accuracy of the high-resolution and standard resolution settings of four digital imaging systems for caries diagnosis and (2) compare the effect on the diagnostic accuracy of reducing the high-resolution image sizes to the standard

  17. 14 CFR 25.1445 - Equipment standards for the oxygen distributing system.

    Science.gov (United States)

    2010-01-01

    ... distributing system. 25.1445 Section 25.1445 Aeronautics and Space FEDERAL AVIATION ADMINISTRATION, DEPARTMENT... Miscellaneous Equipment § 25.1445 Equipment standards for the oxygen distributing system. (a) When oxygen is supplied to both crew and passengers, the distribution system must be designed for either— (1) A source of...

  18. Proposed Standard for a Microclimate Cooling System for Emergency Responder Operations

    Science.gov (United States)

    2012-02-17

    MICROCLIMATE COOLING SYSTEM FOR EMERGENCY RESPONDER OPERATIONS by Brad Laprise February 2012 Final Report August 2007...August 2007 - December 2010 4. TITLE AND SUBTITLE PROPOSED STANDARD FOR A MICROCLIMATE COOLING SYSTEM FOR EMERGENCY RESPONDER OPERATIONS 5a...of a Microclimate Cooling System (MCS), specifically for the Emergency Responder community. MCS have been shown to significantly improve mission

  19. Modular Power System Configured with Standard Product Hybrid DC-DC Converters, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — VPT proposes an innovative concept whereby complex, multiple-output, DC-DC converter systems can be configured through use of only 2 standard product hybrid DC-DC...

  20. A Simplified Laser and Optics System for Laser-Cooled RB Fountain Frequency Standards

    National Research Council Canada - National Science Library

    Kunz, P. D; Heavner, T. P; Jefferts, S. R

    2007-01-01

    ...) atomic fountain frequency standard. This system uses DFB (Distributed Feedback) diode lasers and a frequency offset-locking scheme to generate the optical frequencies needed for laser-cooling, launching, post-cooling, and detection of Rb atoms...

  1. 78 FR 2443 - Criminal Justice Interview Room Recording System (IRRS) Standard, Supplier's Declaration of...

    Science.gov (United States)

    2013-01-11

    ... From the Federal Register Online via the Government Publishing Office ] DEPARTMENT OF JUSTICE Office of Justice Programs Criminal Justice Interview Room Recording System (IRRS) Standard, Supplier's... Criminal Justice IRRS Supplier's Declaration of Conformity Requirements 3. Draft Criminal Justice IRRS...

  2. Trust Management in P2P systems using Standard TuLiP

    OpenAIRE

    Czenko, M.R.; Doumen, J.M.; Etalle, Sandro

    2008-01-01

    In this paper we introduce Standard TuLiP - a new logic based Trust Management system. In Standard TuLiP, security decisions are based on security credentials, which can be issued by different entities and stored at different locations. Standard TuLiP directly supports the distributed credential storage by providing a sound and complete Lookup and Inference AlgoRithm (LIAR). In this paper we focus on (a) the language of Standard TuLiP and (b) on the practical considerations which arise when d...

  3. A preliminary study on the design in architecture of nuclear and radiation safety standard system

    International Nuclear Information System (INIS)

    Song Dahu; Zhang Chi; Yang Lili; Li Bin; Liu Yingwei; An Hongzhen; Gao Siyi; Liu Ting; Meng De

    2014-01-01

    The connotation and function of nuclear and radiation safety standards are analyzed, and their relationships with the relevant laws and regulations are discussed in the paper. Some suggestions and blue print of overall architecture to build nuclear and radiation safety standard system are proposed, on the basis of researching the application status quo, existing problems and needs for nuclear and radiation safety standards in China. This work is a beneficial exploration and attempt to establish China's nuclear and radiation safety standards. (authors)

  4. Electronic Information Standards to Support Obesity Prevention and Bridge Services Across Systems, 2010-2015.

    Science.gov (United States)

    Wiltz, Jennifer L; Blanck, Heidi M; Lee, Brian; Kocot, S Lawrence; Seeff, Laura; McGuire, Lisa C; Collins, Janet

    2017-10-26

    Electronic information technology standards facilitate high-quality, uniform collection of data for improved delivery and measurement of health care services. Electronic information standards also aid information exchange between secure systems that link health care and public health for better coordination of patient care and better-informed population health improvement activities. We developed international data standards for healthy weight that provide common definitions for electronic information technology. The standards capture healthy weight data on the "ABCDs" of a visit to a health care provider that addresses initial obesity prevention and care: assessment, behaviors, continuity, identify resources, and set goals. The process of creating healthy weight standards consisted of identifying needs and priorities, developing and harmonizing standards, testing the exchange of data messages, and demonstrating use-cases. Healthy weight products include 2 message standards, 5 use-cases, 31 LOINC (Logical Observation Identifiers Names and Codes) question codes, 7 healthy weight value sets, 15 public-private engagements with health information technology implementers, and 2 technical guides. A logic model and action steps outline activities toward better data capture, interoperable systems, and information use. Sharing experiences and leveraging this work in the context of broader priorities can inform the development of electronic information standards for similar core conditions and guide strategic activities in electronic systems.

  5. Management control and status reports documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 5

    Science.gov (United States)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the fifth of five volumes on Information System Life-Cycle and Documentation Standards. This volume provides a well organized, easily used standard for management control and status reports used in monitoring and controlling the management, development, and assurance of informations systems and software, hardware, and operational procedures components, and related processes.

  6. Management plan documentation standard and Data Item Descriptions (DID). Volume of the information system life-cycle and documentation standards, volume 2

    Science.gov (United States)

    Callender, E. David; Steinbacher, Jody

    1989-01-01

    This is the second of five volumes of the Information System Life-Cycle and Documentation Standards. This volume provides a well-organized, easily used standard for management plans used in acquiring, assuring, and developing information systems and software, hardware, and operational procedures components, and related processes.

  7. Supporting Obesity Prevention in Statewide Quality Rating and Improvement Systems: A Review of State Standards.

    Science.gov (United States)

    Geary, Nora Ann; Dooyema, Carrie Ann; Reynolds, Meredith Ann

    2017-12-07

    A quality rating and improvement system (QRIS) is a fundamental component of most states' early care and education infrastructures. States can use a QRIS to set standards that define high-quality care and award child care providers with a quality rating designation based on how well they meet these standards. The objective of this review was to describe the extent to which states' QRIS standards include obesity prevention content. We collected publicly available data on states' QRIS standards. We compared states' QRIS standards with 47 high-impact obesity prevention components in Caring for Our Children: National Health and Safety Performance Standards; Guidelines for Early Care and Education Programs, 3rd Edition, and 6 additional topics based on the Centers for Disease Control and Prevention's Spectrum of Opportunities for Obesity Prevention in the Early Care and Education Setting. Thirty-eight states operated a state-wide QRIS in early 2015. Of those, 27 states' QRIS included obesity prevention standards; 20 states had at least one QRIS standard that aligned with the high-impact obesity prevention components, and 21 states had at least one QRIS standard that aligned with at least one of the 6 additional topics. QRIS standards related to the physical activity high-impact obesity prevention components were the most common, followed by components for screen time, nutrition, and infant feeding. The high proportion of states operating a QRIS that included obesity prevention standards, combined with the widespread use of QRISs among states, suggests that a QRIS is a viable way to embed obesity prevention standards into state early care and education systems.

  8. Chinese green product standards: international experience and pathway for a unified system

    Science.gov (United States)

    Yun, Fu; Ling, Lin; Dongfeng, Gao; Shuo, Yang

    2017-11-01

    The establishment of a unified green product standard system is of great importance regarding the effective supply of green products and meeting trend of the consumption upgrade. It also is helpful to reduce the cost of green information disclosure of enterprises, and facilitate the supply-side structural reform. Based on the experience of developing and implementing green product standards in the EU, Germany, America, Japan and so on, combined with current Chinese standard systems including environmental protection, energy conservation, water conservation, low carbon, recycling, regeneration and organic, with the adoption of the life cycle thinking, this paper brings forward basic requirements on organizations including pollutant emissions, establishment of management system, energy conservation and emission reduction technology and green supply chain management, and proposes indicator requirements on product including resource attributes, energy attributes, environmental attributes and quality attributes, so as to guide the establishment of green product evaluation standards in the context of China.

  9. Key elements on implementing an occupational health and safety management system using ISO 45001 standard

    Directory of Open Access Journals (Sweden)

    Darabont Doru Costin

    2017-01-01

    Full Text Available Occupational health and safety (OHS management system is one of the main elements of the company’s general management system. During last decade, Romanian companies gained a valuable experience on implementing this type of management systems, using OHSAS 18001 referential and standard. However, the projected release of the ISO 45001 represents a new approach which requires the companies to take in consideration new key elements for a successful implementation of the OHS management system. The aim of the paper is to identify and analyse these key elements, by integration of the following issues: standard requirements, Romanian OHS legislation and good practice examples, including the general control measures for new and emerging risks such as psycho-social risks, workforce ageing and new technologies. The study results represent an important work instrument for each company interested to implement or upgrade its OHS management system using ISO 45001 standard and could be used regardless the company size or activity domain.

  10. Building a computer-aided design capability using a standard time share operating system

    Science.gov (United States)

    Sobieszczanski, J.

    1975-01-01

    The paper describes how an integrated system of engineering computer programs can be built using a standard commercially available operating system. The discussion opens with an outline of the auxiliary functions that an operating system can perform for a team of engineers involved in a large and complex task. An example of a specific integrated system is provided to explain how the standard operating system features can be used to organize the programs into a simple and inexpensive but effective system. Applications to an aircraft structural design study are discussed to illustrate the use of an integrated system as a flexible and efficient engineering tool. The discussion concludes with an engineer's assessment of an operating system's capabilities and desirable improvements.

  11. Fundamental Data Standards for Science Data System Interoperability and Data Correlation

    Science.gov (United States)

    Hughes, J. Steven; Gopala Krishna, Barla; Rye, Elizabeth; Crichton, Daniel

    The advent of the Web and languages such as XML have brought an explosion of online science data repositories and the promises of correlated data and interoperable systems. However there have been relatively few successes in meeting the expectations of science users in the internet age. For example a Google-like search for images of Mars will return many highly-derived and appropriately tagged images but largely ignore the majority of images in most online image repositories. Once retrieved, users are further frustrated by poor data descriptions, arcane formats, and badly organized ancillary information. A wealth of research indicates that shared information models are needed to enable system interoperability and data correlation. However, at a more fundamental level, data correlation and system interoperability are dependant on a relatively few shared data standards. A com-mon data dictionary standard, for example, allows the controlled vocabulary used in a science repository to be shared with potential collaborators. Common data registry and product iden-tification standards enable systems to efficiently find, locate, and retrieve data products and their metadata from remote repositories. Information content standards define categories of descriptive data that help make the data products scientifically useful to users who were not part of the original team that produced the data. The Planetary Data System (PDS) has a plan to move the PDS to a fully online, federated system. This plan addresses new demands on the system including increasing data volume, numbers of missions, and complexity of missions. A key component of this plan is the upgrade of the PDS Data Standards. The adoption of the core PDS data standards by the International Planetary Data Alliance (IPDA) adds the element of international cooperation to the plan. This presentation will provide an overview of the fundamental data standards being adopted by the PDS that transcend science domains and that

  12. Are Standards-based Quality Systems a Threat to the Internationalization of Teaching and Learning?

    Directory of Open Access Journals (Sweden)

    Scott Thompson-Whiteside

    2013-05-01

    Full Text Available This paper explores the current shift in Australia’s higher education system moving to a more explicit, standards-based quality system and its potential impact on international partnerships in teaching and learning, particularly in Asia. The new Tertiary Education Quality and Standards Agency and the underlying Higher Education Standards Framework have the potential to threaten a large number of transnational or cross-border programs delivered outside of Australia. With over one hundred and fifty thousand tertiary students studying Australian programs in Asia, the impact could be significant. It would also be significant for countries that leverage of Australian Universities to build human capacity within their country. The paper highlights the current practice of assuring equivalent and comparable academic standards in transnational education and explores how shifting to a more precise standards framework will require more explicit demonstration of standards across teaching, learning and student outcomes. If equivalent or comparable standards were to be achieved across the whole standards framework, it is likely to constrain the opportunities for internationalization and the formation of new transnational partnerships.

  13. Integrated management system - management standards evolution and the IAEA new approach

    International Nuclear Information System (INIS)

    Oliveira, Dirceu Paulo de; Zouain, Desiree Moraes

    2007-01-01

    The management standards application began in military and nuclear areas towards the end of Second World War, when some westerns countries developed quality standards to improve their means to assess suppliers' conditions to assure their products conformance, which was increasingly complex and required a higher degree of reliability. Afterwards, the quality standards application was extended to the consumer market focused on consumers' requirements satisfaction. Coming along the society crescent concern about quality of life, other management standards were developed, such as those dealing with environmental and sustainable development, occupational health and safety, social accountability and so on. As a consequence, the management process became complex. The management system integrated form approach makes possible the compatibility of distinct and complementary interests from several functions and disciplines involved and supply the absence of the organizations' holistic approach. According to this integrated management approach, the Agency - 'International Atomic Energy Agency' (IAEA) - decided to review the structure of the 50-C-Q standard - 'Quality Assurance for Safety in Nuclear Power Plants and Other Nuclear Installations', from 1996, publishing in 2006 the new GS-R-3 standard - 'The Management System for Facilities and Activities - Safety Requirements'. This work presents a brief evolution of management standards and integrated management approach, showing the Agency's new vision concerning this issue with the GS-R-3 standard publication. (author)

  14. The strategic use of standardized information exchange technology in a university health system.

    Science.gov (United States)

    Cheng, Po-Hsun; Chen, Heng-Shuen; Lai, Feipei; Lai, Jin-Shin

    2010-04-01

    This article illustrates a Web-based health information system that is comprised of specific information exchange standards related to health information for healthcare services in National Taiwan University Health System. Through multidisciplinary teamwork, medical and informatics experts collaborated and studied on system scope definition, standard selection challenges, system implementation barriers, system management outcomes, and further expandability of other systems. After user requirement analysis and prototyping, from 2005 to 2008, an online clinical decision support system with multiple functions of reminding and information push was implemented. It was to replace its original legacy systems and serve among the main hospital and three branches of 180-200 clinics and 7,500-8,000 patient visits per day. To evaluate the effectiveness of this system, user surveys were performed, which revealed that the average score of user satisfaction increased from 2.80 to 3.18 on a 4-point scale. Among the items, especially e-learning for training service, courtesy communications for system requests, and courtesy communications for system operations showed statistically significant improvement. From this study, the authors concluded that standardized information exchange technologies can be used to create a brand new enterprise value and steadily obtain more competitive advantages for a prestige healthcare system.

  15. 41 CFR 105-71.120 - Standards for financial management systems.

    Science.gov (United States)

    2010-07-01

    ... 41 Public Contracts and Property Management 3 2010-07-01 2010-07-01 false Standards for financial... violation of the restrictions and prohibitions of applicable statutes. (b) The financial management systems... the financial management system of any applicant for financial assistance as part of a preaward review...

  16. Modern "Challenges" in the System of Personnel Training: Standardization and Innovations

    Science.gov (United States)

    Zaitseva, Natalia; Dzhandzhugazova, Elena; Bondarchuk, Natalya; Zhukova, Marina

    2017-01-01

    Purpose: The study of the problems hindering improvement of the system of training through standardization of qualification requirements is relevant because, in a globalized system of teaching staff and high rates of migration, not only national but also international requirements for employees should be considered. This increases the…

  17. Evaluating spoken dialogue systems according to de-facto standards: A case study

    NARCIS (Netherlands)

    Möller, S.; Smeele, P.; Boland, H.; Krebber, J.

    2007-01-01

    In the present paper, we investigate the validity and reliability of de-facto evaluation standards, defined for measuring or predicting the quality of the interaction with spoken dialogue systems. Two experiments have been carried out with a dialogue system for controlling domestic devices. During

  18. Leadership Strategies in Implementation of High-School Standards-Based Grading Systems

    Science.gov (United States)

    Pritzl, Jerome

    2016-01-01

    This multi-site case study examined leadership strategies used during successful implementation of standards-based grading systems in three Wisconsin high schools. It found that leaders' reported commitment, patience, and persistence showed evidence of sustainable, high-functioning systems. It drew two main conclusions: first, school leaders need…

  19. 46 CFR 153.404 - Standards for containment systems having required closed gauges.

    Science.gov (United States)

    2010-10-01

    ... Design and Equipment Cargo Gauging Systems § 153.404 Standards for containment systems having required....635 cm (approx. 0.25 in.) diameter when the cargo's vapor pressure is 28 kPa gauge (approx. 4 psig) or... gauges. 153.404 Section 153.404 Shipping COAST GUARD, DEPARTMENT OF HOMELAND SECURITY (CONTINUED) CERTAIN...

  20. 77 FR 51649 - Federal Motor Vehicle Safety Standards; Motorcycle Brake Systems

    Science.gov (United States)

    2012-08-24

    ... Traffic Safety Administration 49 CFR Part 571 Federal Motor Vehicle Safety Standards; Motorcycle Brake...; Motorcycle Brake Systems AGENCY: National Highway Traffic Safety Administration, Department of Transportation... (FMVSS) on motorcycle brake systems to add and update requirements and test procedures and to harmonize...

  1. Technical evaluation of vehicle ignition systems: conduct differences between a high energy capacitive system and a standard inductive system

    Directory of Open Access Journals (Sweden)

    Bruno Santos Goulart

    2014-09-01

    Full Text Available An efficient combustion depends on many factors, such as injection, turbulence and ignition characteristics. With the improvement of internal combustion engines the turbulence intensity and internal pressure have risen, demanding more efficient and powerful ignition systems. In direct injection engines, the stratified charge resultant from the wall/air-guided or spray-guided system requires even more energy. The Paschen’s law shows that spark plug gap and mixture density are proportional to the dielectric rupture voltage. It is known that larger spark gaps promote higher efficiency in the internal combustion engines, since the mixture reaction rate rises proportionally. However, the ignition system must be adequate to the imposed gap, not only on energy, but also on voltage and spark duration. For the reported study in this work two test benches were built: a standard inductive ignition system and a capacitive discharge high energy ignition system, with variable voltage and capacitance. The influence of the important parameters energy and ignition voltage on the spark duration, as well as the electrode gap and shape were analyzed. It was also investigated the utilization of a coil with lower resistance and inductance values, as well as spark plugs with and without internal resistances.

  2. Choice of insulation standard for pipe networks in 4th generation district heating systems

    DEFF Research Database (Denmark)

    Lund, Rasmus Søgaard; Mohammadi, Soma

    2016-01-01

    and smart gas grids. Improving DH pipes by improving the insulation standard results in decreasing the heat and temperature losses from the pipe networks. When reducing heat losses from DH pipes, there is a trade-off between the increasing cost of pipe insulation and the associated savings in the heat...... by implementing different pipe insulation standards. In the second step, the specific grid losses found in the first step are analysed in an integrated energy systems model where all main energy sectors and their interrelations are included. The outcome of the study can provide decision support when planning...... investments in DH systems today and in the future. The results from the case of Denmark shows that pipes with higher insulation standard (series 3) is generally preferable, but the highest insulation standard available today (series 4) might be preferable in the future if fuel prices or increase or investment...

  3. Towards Standardized Patient Data Exchange: Integrating a FHIR Based API for the Open Medical Record System.

    Science.gov (United States)

    Kasthurirathne, Suranga N; Mamlin, Burke; Grieve, Grahame; Biondich, Paul

    2015-01-01

    Interoperability is essential to address limitations caused by the ad hoc implementation of clinical information systems and the distributed nature of modern medical care. The HL7 V2 and V3 standards have played a significant role in ensuring interoperability for healthcare. FHIR is a next generation standard created to address fundamental limitations in HL7 V2 and V3. FHIR is particularly relevant to OpenMRS, an Open Source Medical Record System widely used across emerging economies. FHIR has the potential to allow OpenMRS to move away from a bespoke, application specific API to a standards based API. We describe efforts to design and implement a FHIR based API for the OpenMRS platform. Lessons learned from this effort were used to define long term plans to transition from the legacy OpenMRS API to a FHIR based API that greatly reduces the learning curve for developers and helps enhance adhernce to standards.

  4. Information Systems Security Management: A Review and a Classification of the ISO Standards

    Science.gov (United States)

    Tsohou, Aggeliki; Kokolakis, Spyros; Lambrinoudakis, Costas; Gritzalis, Stefanos

    The need for common understanding and agreement of functional and non-functional requirements is well known and understood by information system designers. This is necessary for both: designing the "correct" system and achieving interoperability with other systems. Security is maybe the best example of this need. If the understanding of the security requirements is not the same for all involved parties and the security mechanisms that will be implemented do not comply with some globally accepted rules and practices, then the system that will be designed will not necessarily achieve the desired security level and it will be very difficult to securely interoperate with other systems. It is therefore clear that the role and contribution of international standards to the design and implementation of security mechanisms is dominant. In this paper we provide a state of the art review on information security management standards published by the International Organization for Standardization and the International Electrotechnical Commission. Such an analysis is meaningful to security practitioners for an efficient management of information security. Moreover, the classification of the standards in the clauses of ISO/IEC 27001:2005 that results from our analysis is expected to provide assistance in dealing with the plethora of security standards.

  5. An accurate on-site calibration system for electronic voltage transformers using a standard capacitor

    Science.gov (United States)

    Hu, Chen; Chen, Mian-zhou; Li, Hong-bin; Zhang, Zhu; Jiao, Yang; Shao, Haiming

    2018-05-01

    Ordinarily electronic voltage transformers (EVTs) are calibrated off-line and the calibration procedure requires complex switching operations, which will influence the reliability of the power grid and induce large economic losses. To overcome this problem, this paper investigates a 110 kV on-site calibration system for EVTs, including a standard channel, a calibrated channel and a PC equipped with the LabView environment. The standard channel employs a standard capacitor and an analogue integrating circuit to reconstruct the primary voltage signal. Moreover, an adaptive full-phase discrete Fourier transform (DFT) algorithm is proposed to extract electrical parameters. The algorithm involves the process of extracting the frequency of the grid, adjusting the operation points, and calculating the results using DFT. In addition, an insulated automatic lifting device is designed to realize the live connection of the standard capacitor, which is driven by a wireless remote controller. A performance test of the capacitor verifies the accurateness of the standard capacitor. A system calibration test shows that the system ratio error is less than 0.04% and the phase error is below 2‧, which meets the requirement of the 0.2 accuracy class. Finally, the developed calibration system was used in a substation, and the field test data validates the availability of the system.

  6. ISO 14000 Environmental Management System Standards and Their Application at Schools

    OpenAIRE

    Yalçınkaya, Mustafa

    2003-01-01

    Today, the issue of environmental pollution, which is spreading and threatening life, is now being considered with greater attention. For this reason, the ISO 14000 Standards of Environmental Management System has been created through designing the environment in an international framework together with the concepts of management and standardization. Starting such an understanding with schools will let new generations have a new perspective towards the environment. In this article the followi...

  7. Development of a document management system for the standardization of clinical laboratory documents.

    Science.gov (United States)

    Hwang, Sang-Hyun; Jung, Seon-Kyung; Kang, Soo-Jin; Cha, Hyo Soung; Chung, Seung Hyun; Lee, Do-Hoon

    2013-11-01

    Documentation is very important; a considerable number of documents exist for use in accreditation inspection. However, most laboratories do not effectively manage the processes of documentation, organization, and storage. The purpose of this study was to facilitate the establishment of a strategically effective and sustainably standardized document management system. A document code formatting system was modified by comparing the document list data received from 3 major university hospitals. In addition, a questionnaire regarding document code standardization was created and sent to 268 institutes to establish document classifications and generate a standard coding scheme. A computerized document management system was developed. Only 32% (8 out of 25 institutes) answered that they were able to identify all of the document types and their numbers. In total, 76% of institutes (19 out of 25) answered that a systematic document management system was necessary. Disorganized document files were systemized by classifying them into 8 major groups according to their characteristics: patient test records (T), test quality control (Q), manuals (M), equipment and environment management (E), statistics (S), division administration (A), department administration (R), and others (X). Our documentation system may serve as a basis for the standardization of documents and the creation of a document management system for all hospital laboratories.

  8. An IEC standard on quality assurance for diagnostic X-ray systems

    International Nuclear Information System (INIS)

    Boer, J.A. den

    1985-01-01

    A presentation is given of some characteristics of the International Electrotechnical Commission (IEC). This is followed by a short discussion of general aspects of quality assurance in the diagnostic department. From this discussion it becomes apparent to which aspects of quality assurance IEC can contribute. Within that framework a working group of Sub-Committee 62 is at present active in developing a standard on quality assurance for diagnostic X-ray systems. The standard will contain a set of constancy tests that is claimed to allow a balanced quality assurance programme. The democratic procedure of IEC should guarantee that the proposed standard gains wide acceptance. (author)

  9. NASA-STD-3001, Space Flight Human-System Standard and the Human Integration Design Handbook

    Science.gov (United States)

    Whitmore, Mihriban; Boyer, Jennifer; Holubec, Keith

    2012-01-01

    NASA-STD-3001 Space Flight Human-System Standard Volume 1, Crew Health, Volume 2, Human Factors, Habitability and Environmental Health, and the Human Integration Design Handbook (HIDH) have replaced the Man-Systems Integration Standards (MSIS), NASA-STD-3000. For decades, NASA-STD-3000 was a significant contribution to human spaceflight programs and to human-systems integration. However, with research program and project results being realized, advances in technology, and the availability of new information in a variety of topic areas, the time had arrived to update this extensive suite of standards and design information. NASA-STD-3001, Volume 2 contains the Agency level standards from the human and environmental factors disciplines that ensure human spaceflight operations are performed safely, efficiently, and effectively. The HIDH is organized in the same sequence and serves as the companion document to NASA-STD-3001, Volume 2, providing a compendium of human spaceflight history and knowledge. The HIDH is intended to aid interpretation of NASA-STD-3001, Volume 2 standards and to provide guidance for requirement writers and vehicle and habitat designers. Keywords Human Factors, Standards, Environmental Factors, NASA

  10. Concept for an International Standard related to Space Weather Effects on Space Systems

    Science.gov (United States)

    Tobiska, W. Kent; Tomky, Alyssa

    There is great interest in developing an international standard related to space weather in order to specify the tools and parameters needed for space systems operations. In particular, a standard is important for satellite operators who may not be familiar with space weather. In addition, there are others who participate in space systems operations that would also benefit from such a document. For example, the developers of software systems that provide LEO satellite orbit determination, radio communication availability for scintillation events (GEO-to-ground L and UHF bands), GPS uncertainties, and the radiation environment from ground-to-space for commercial space tourism. These groups require recent historical data, current epoch specification, and forecast of space weather events into their automated or manual systems. Other examples are national government agencies that rely on space weather data provided by their organizations such as those represented in the International Space Environment Service (ISES) group of 14 national agencies. Designers, manufacturers, and launchers of space systems require real-time, operational space weather parameters that can be measured, monitored, or built into automated systems. Thus, a broad scope for the document will provide a useful international standard product to a variety of engineering and science domains. The structure of the document should contain a well-defined scope, consensus space weather terms and definitions, and internationally accepted descriptions of the main elements of space weather, its sources, and its effects upon space systems. Appendices will be useful for describing expanded material such as guidelines on how to use the standard, how to obtain specific space weather parameters, and short but detailed descriptions such as when best to use some parameters and not others; appendices provide a path for easily updating the standard since the domain of space weather is rapidly changing with new advances

  11. Development of Skill Standards and a Tailor-made Education System in TOSHIBA

    Science.gov (United States)

    Harashima, Shuji

    Software development for embedded systems such as cellular phone and digital TV systems has become larger in scale while development times have become shorter. More over, the necessary technologies are required to respond more rapidly in line with movements in the sales climate for these products. In such a business environment, skill enhancement for software engineers is highly important. In this paper, we explain a tailor-made education system based on skill standards.

  12. Embedded Web Technology: Applying World Wide Web Standards to Embedded Systems

    Science.gov (United States)

    Ponyik, Joseph G.; York, David W.

    2002-01-01

    Embedded Systems have traditionally been developed in a highly customized manner. The user interface hardware and software along with the interface to the embedded system are typically unique to the system for which they are built, resulting in extra cost to the system in terms of development time and maintenance effort. World Wide Web standards have been developed in the passed ten years with the goal of allowing servers and clients to intemperate seamlessly. The client and server systems can consist of differing hardware and software platforms but the World Wide Web standards allow them to interface without knowing about the details of system at the other end of the interface. Embedded Web Technology is the merging of Embedded Systems with the World Wide Web. Embedded Web Technology decreases the cost of developing and maintaining the user interface by allowing the user to interface to the embedded system through a web browser running on a standard personal computer. Embedded Web Technology can also be used to simplify an Embedded System's internal network.

  13. A Microfluidic Immunostaining System Enables Quality Assured and Standardized Immunohistochemical Biomarker Analysis

    Science.gov (United States)

    Kwon, Seyong; Cho, Chang Hyun; Kwon, Youngmee; Lee, Eun Sook; Park, Je-Kyun

    2017-04-01

    Immunohistochemistry (IHC) plays an important role in biomarker-driven cancer therapy. Although there has been a high demand for standardized and quality assured IHC, it has rarely been achieved due to the complexity of IHC testing and the subjective validation-based process flow of IHC quality control. We present here a microfluidic immunostaining system for the standardization of IHC by creating a microfluidic linearly graded antibody (Ab)-staining device and a reference cell microarray. Unlike conventional efforts, our system deals primarily with the screening of biomarker staining conditions for quantitative quality assurance testing in IHC. We characterized the microfluidic matching of Ab staining intensity using three HER2 Abs produced by different manufacturers. The quality of HER2 Ab was also validated using tissues of breast cancer patients, demonstrating that our system is an efficient and powerful tool for the standardization and quality assurance of IHC.

  14. EMPIRICAL ANALYSIS OF INTEGRATION WITHIN THE STANDARDS-BASED INTEGRATED MANAGEMENT SYSTEMS

    Directory of Open Access Journals (Sweden)

    Stanislav Karapetrović

    2010-03-01

    Full Text Available The overall goal of this paper is to empirically analyze the augmentation and integration of ISO 9001 - based quality management systems with ISO 14001 - based environmental and other standardized management systems. Results from a survey of 298 organizations headquartered in the Spanish regions of Catalonia and the Basque Country are presented. All surveyed organizations were registered to both ISO 9001: 2000 and ISO 14001: 2004, while some had further management system standard certificates, for example in occupational health and safe ty and social responsibility. Various aspects of augmentation and integration, such as the usage of additional subsystem standards, the process of integration and the conduct of audits, are discussed through largely descriptive analyses.

  15. Standards and the design of the Advanced Photon Source control system

    International Nuclear Information System (INIS)

    McDowell, W.P.; Knott, M.J.; Lenkszus, F.R.; Kraimer, M.R.; Daly, R.T.; Arnold, N.D.; Anderson, M.D.; Anderson, J.B.; Zieman, R.C.; Cha, Ben-Chin K.; Vong, F.C.; Nawrocki, G.J.; Gunderson, G.R.; Karonis, N.T.; Winans, J.R.

    1991-01-01

    The Advanced Photon Source (APS), now under construction at Argonne National Laboratory is a 7 GeV positron storage ring dedicated to research facilities using synchrotron radiation. This ring, along with its injection accelerators is to be controlled and monitored with a single, flexible, and expandable control system. In the conceptual stage the control system design group faced the challenges that face all control system designers: to force the machine designers to quantify and codify the system requirements, to protect the investment in hardware and software from rapid obsolescence, and to find methods of quickly incorporating new generations of equipment and replace of obsolete equipment without disrupting the exiting system. To solve these and related problems, the APS control system group made an early resolution to use standards in the design of the system. This paper will cover the present status of the APS control system as well as discuss the design decisions which led us to use industrial standards and collaborations with other laboratories whenever possible to develop a control system. It will explain the APS control system and illustrate how the use of standards has allowed APS to design a control system whose implementation addresses these issues. The system will use high performance graphic workstations using an X-Windows Graphical User Interface at the operator interface level. It connects to VME-based microprocessors at the field level using TCP/IP protocols over high performance networks. This strategy assures the flexibility and expansibility of the control system. A defined interface between the system components will allow the system to evolve with the direct addition of future, improved equipment and new capabilities

  16. GoldenBraid: an iterative cloning system for standardized assembly of reusable genetic modules.

    Directory of Open Access Journals (Sweden)

    Alejandro Sarrion-Perdigones

    Full Text Available Synthetic Biology requires efficient and versatile DNA assembly systems to facilitate the building of new genetic modules/pathways from basic DNA parts in a standardized way. Here we present GoldenBraid (GB, a standardized assembly system based on type IIS restriction enzymes that allows the indefinite growth of reusable gene modules made of standardized DNA pieces. The GB system consists of a set of four destination plasmids (pDGBs designed to incorporate multipartite assemblies made of standard DNA parts and to combine them binarily to build increasingly complex multigene constructs. The relative position of type IIS restriction sites inside pDGB vectors introduces a double loop ("braid" topology in the cloning strategy that allows the indefinite growth of composite parts through the succession of iterative assembling steps, while the overall simplicity of the system is maintained. We propose the use of GoldenBraid as an assembly standard for Plant Synthetic Biology. For this purpose we have GB-adapted a set of binary plasmids for A. tumefaciens-mediated plant transformation. Fast GB-engineering of several multigene T-DNAs, including two alternative modules made of five reusable devices each, and comprising a total of 19 basic parts are also described.

  17. Procedures and Standards for Residential Ventilation System Commissioning: An Annotated Bibliography

    Energy Technology Data Exchange (ETDEWEB)

    Stratton, J. Chris [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Wray, Craig P. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2013-04-01

    Beginning with the 2008 version of Title 24, new homes in California must comply with ANSI/ASHRAE Standard 62.2-2007 requirements for residential ventilation. Where installed, the limited data available indicate that mechanical ventilation systems do not always perform optimally or even as many codes and forecasts predict. Commissioning such systems when they are installed or during subsequent building retrofits is a step towards eliminating deficiencies and optimizing the tradeoff between energy use and acceptable IAQ. Work funded by the California Energy Commission about a decade ago at Berkeley Lab documented procedures for residential commissioning, but did not focus on ventilation systems. Since then, standards and approaches for commissioning ventilation systems have been an active area of work in Europe. This report describes our efforts to collect new literature on commissioning procedures and to identify information that can be used to support the future development of residential-ventilation-specific procedures and standards. We recommend that a standardized commissioning process and a commissioning guide for practitioners be developed, along with a combined energy and IAQ benefit assessment standard and tool, and a diagnostic guide for estimating continuous pollutant emission rates of concern in residences (including a database that lists emission test data for commercially-available labeled products).

  18. Benchmarking the Naval Systems Engineering Guide Against the Industry Standards for Systems Engineering

    Science.gov (United States)

    2012-09-01

    are all using the same standard or comparable ones. While one would think that there is coherency among those contractors and others building and...American Scientists, 2011). Adaption and modification are significant parts of SE thinking and methodology that need to be well used and available to...Obsolecence None None None Cover Disposal Standards None None Partial Cover Cover Data Gathering None Cover Cover Cover Enviromental Concerns None

  19. Upgrade and standardization of real-time software for telescope systems at the Gemini telescopes

    Science.gov (United States)

    Rambold, William N.; Gigoux, Pedro; Urrutia, Cristian; Ebbers, Angelic; Taylor, Philip; Rippa, Mathew J.; Rojas, Roberto; Cumming, Tom

    2014-07-01

    The real-time control systems for the Gemini Telescopes were designed and built in the 1990s using state-of-the-art software tools and operating systems of that time. Since these systems are in use every night they have not been kept upto- date and are now obsolete and very labor intensive to support. Gemini is currently engaged in a major upgrade of its telescope control systems. This paper reviews the studies performed to select and develop a new standard operating environment for Gemini real-time systems and the work performed so far in implementing it.

  20. A 15 channel 2- and 3-fold coincidence counting system for radioactivity standardization

    International Nuclear Information System (INIS)

    Simpson, B.R.S.; Meyer, B.R.; Raave, D.A.

    1986-01-01

    The 4π β-γ liquid scintillation coincidence counting system which is used at the National Accelerator Centre for standardizing radioisotopes, has been extended to allow for up to fifteen data points to be measured simultaneously by introducing a 15-fold coincidence unit and a 32-channel scaler into the system. A new control / data acquisition computer program has been written and its operation explained in detail. The advantages of the new system are discussed, and the activity of a 139 Ce source as measured by the new system and the old 3-fold system is compared

  1. C-Band Airport Surface Communications System Standards Development, Phase I

    Science.gov (United States)

    Hall, Edward; Isaacs, James; Zelkin, Natalie; Henriksen. Steve

    2010-01-01

    This document is being provided as part of ITT's NASA Glenn Research Center Aerospace Communication Systems Technical Support (ACSTS) contract NNC05CA85C, Task 7: "New ATM Requirements--Future Communications, C-Band and L-Band Communications Standard Development." The proposed future C-band (5091- to 5150-MHz) airport surface communication system, referred to as the Aeronautical Mobile Airport Communications System (AeroMACS), is anticipated to increase overall air-to-ground data communications systems capacity by using a new spectrum (i.e., not very high frequency (VHF)). Although some critical services could be supported, AeroMACS will also target noncritical services, such as weather advisory and aeronautical information services as part of an airborne System Wide Information Management (SWIM) program. AeroMACS is to be designed and implemented in a manner that will not disrupt other services operating in the C-band. This report defines the AeroMACS concepts of use, high-level system requirements, and architecture; the performance of supporting system analyses; the development of AeroMACS test and demonstration plans; and the establishment of an operational AeroMACS capability in support of C-band aeronautical data communications standards to be advanced in both international (International Civil Aviation Organization, ICAO) and national (RTCA) forums. This includes the development of system parameter profile recommendations for AeroMACS based on existing Institute of Electrical and Electronics Engineering (IEEE) 802.16e- 2009 standards

  2. Domain management OSSs: bridging the gap between legacy and standards-based network management systems

    Science.gov (United States)

    Lemley, Todd A.

    1996-11-01

    The rapid change in the telecommunications environment is forcing carriers to re-assess not only their service offering, but also their network management philosophy. The competitive carrier environment has taken away the luxury of throwing technology at a problem by using legacy and proprietary systems and architectures. A more flexible management environment is necessary to effectively gain, and maintain operating margins in the new market era. Competitive forces are driving change which gives carriers more choices than those that are available in legacy and standards-based solutions alone. However, creating an operational support system (OSS) with this gap between legacy and standards has become as dynamic as the services which it supports. A philosophy which helps to integrate the legacy and standards systems is domain management. Domain management relates to a specific service or market 'domain,'and its associated operational support requirements. It supports a companies definition of its business model, which drives the definition of each domain. It also attempts to maximize current investment while injecting new technology available in a practical approach. The following paragraphs offer an overview of legacy systems, standards-based philosophy, and the potential of domain management to help bridge the gap between the two types of systems.

  3. NASA/NBS (National Aeronautics and Space Administration/National Bureau of Standards) standard reference model for telerobot control system architecture (NASREM)

    Science.gov (United States)

    Albus, James S.; Mccain, Harry G.; Lumia, Ronald

    1989-01-01

    The document describes the NASA Standard Reference Model (NASREM) Architecture for the Space Station Telerobot Control System. It defines the functional requirements and high level specifications of the control system for the NASA space Station document for the functional specification, and a guideline for the development of the control system architecture, of the 10C Flight Telerobot Servicer. The NASREM telerobot control system architecture defines a set of standard modules and interfaces which facilitates software design, development, validation, and test, and make possible the integration of telerobotics software from a wide variety of sources. Standard interfaces also provide the software hooks necessary to incrementally upgrade future Flight Telerobot Systems as new capabilities develop in computer science, robotics, and autonomous system control.

  4. Lean environmental management integration system for sustainability of ISO 14001:2004 standard implementation

    Directory of Open Access Journals (Sweden)

    Perumal Puvanasvaran

    2014-10-01

    Full Text Available Purpose: The purpose of this study is to present a model for integrating Lean Principles with ISO 14001 Environmental Management System.Design/methodology/approach: To achieve the objective of the study, the methodology used in this study is based on preliminary literature review of ISO 14001 standards and Lean Principles as well as certain case reports from various proponents and authors of ISO 14001 and Lean as noted in various articles and journals and some books.Findings and Originality/value: The findings of this study are a new model called Lean Environmental Management Integration System (LEMIS has been developed and leads to the creation of these measurement standards for evaluating the organization, making its environmental efforts more realistic, focused and attainable.Research limitations/implications: Future research should be conducted case studies in this direction are required to be conducted for examining the feasibility of amalgamation and implementing ISO 14001:2004 standards with the philosophy of Lean Principles to enable the achievement of world class standards.Practical implications: This model helps to eliminate any wasteful processes in the organization’s implementation of the ISO 14001 standard thus leading to higher environmental performance.  Integrating the standard with Lean principles through LEMIS model helps to specify these performance measures making the standard achieve sustainability and continual improvement.Originality/value: This study presents a unique approach of integrating the two main models, namely Lean Principles and ISO 14001 Environmental Management System, as a single framework benefiting contemporary organizations.

  5. Calibration Standards for Surface Topography Measuring Systems down to Nanometric Range

    DEFF Research Database (Denmark)

    Trumpold, H.; De Chiffre, Leonardo; Andreasen, Jan Lasson

    Background For the precise and accurate measurement of surface topography a whole range of surface detection systems is available. With their application in research and production problems arise due to the lack of traceable standard artefacts for the instrument calibration in X, Y and Z directions...... to be replicated during all stages of the replication processes. Procedures for cleaning glass, PVC, PC, PMM and Ni-surfaces have been developed and tested. Calibration procedures for calibration standards and for calibrating instruments in X-, Y- and Z-direction have been developed and tested. Proposals...... in industries ranging from automotive manufacture to ultraprecision manufacture of data storage systems and compact discs. Objectives The project is concerned with developing calibration standards including their production methods and calibration procedures as a consistent means of calibrating different types...

  6. Study on the standardization of hospital information system for medical image information sharing

    International Nuclear Information System (INIS)

    Kim, Seon Chil; Kwon, Su Ja

    2001-01-01

    As the adoption of PACS and hospital information system among university hospitals and hospital level institutions grows bigger, the need of sharing and transferring medical information among medical institutions is rising. For the medical information, which is saved in the hospital medical system, to be transferred within the same hospital, domestic, or foreign medical institutions, a standard protocol is necessary. But realistically, most of the domestic hospitals do not abide by H7L which is the HIS standard and so, information transferring is not possible as of present. As such, the purpose of this research is to implement the information between HIS and PACS to an international standard by constructing HL7 messages through HL7 Interface, which will eventually make possible information transferring between different hospitals. Our research team has developed a method which will make the PACS equip hospitals that do not follow HL7 standard which will make possible to transfer information between HIS and PACS through HL7 Message. By constructing message files, which follow the form of HL7 Message in the HL7 Interface, they can be transferred to PACS through the ftp protocol. The realization of the HIS/OCS Interface through HL7 enables data transferring between domestic and foreign medical institutions possible by implementing the international standard in the PACS and HIS data transferring process. The HL7 that our research team has developed made patient data transfer between medical institutions possible. The Interface is for a specific system model and in order for the data transfer between different systems to be realized, interfaces that are fit for each system must be needed. If the Interface is improvised and implemented to each hospital's information system, the data sharing among medical institutions can be broadened

  7. 25 CFR 900.43 - What are the general financial management system standards that apply to a tribal organization...

    Science.gov (United States)

    2010-04-01

    ... ASSISTANCE ACT Standards for Tribal or Tribal Organization Management Systems Standards for Financial... 25 Indians 2 2010-04-01 2010-04-01 false What are the general financial management system standards that apply to a tribal organization carrying out a self-determination contract? 900.43 Section 900...

  8. E-Business Reporting: Towards a Global Standard for Financial Reporting Systems Using XBRL

    Science.gov (United States)

    Long, Margaret J.

    2013-01-01

    Reporting systems can provide transparency into financial markets necessary for a sustainable, prosperous global economy. The most widely used global platform for exchanging electronic information about companies to regulatory bodies is XBRL. Standards for this platform are in the process of becoming legally harmonized, but not all countries are…

  9. 49 CFR 179.400-4 - Insulation system and performance standard.

    Science.gov (United States)

    2010-10-01

    ... specification— (1) Standard Heat Transfer Rate (SHTR), expressed in Btu/day/lb of water capacity, means the rate of heat transfer used for determining the satisfactory performance of the insulation system of a cryogenic tank car tank in cryogenic liquid service (see § 179.401-1 table). (2) Test cryogenic liquid means...

  10. Correction: MurCSS: A Tool for Standardized Evaluation of Decadal Hindcast Systems

    Directory of Open Access Journals (Sweden)

    Sebastian Illing

    2016-06-01

    Full Text Available This article details a correction to the article: Illing S, Kadow C, Oliver K, Cubasch U. MurCSS: A Tool for Standardized Evaluation of Decadal Hindcast Systems. Journal of Open Research Software. 2014; 2(1: e24. DOI: http://doi.org/10.5334/jors.bf

  11. Implementing Adaptability in the Standard Reference Model for Intelligent Multimedia Presentation Systems

    NARCIS (Netherlands)

    L. Rutledge (Lloyd); L. Hardman (Lynda); J.R. van Ossenbruggen (Jacco); D.C.A. Bulterman (Dick)

    1998-01-01

    textabstractThis paper discusses the implementation of adaptability in environments that are based on the Standard Reference Model for Intelligent Multimedia Presentation Systems. This adaptability is explored in the context of style sheets, which are represented in such formats as DSSSL. The use of

  12. 49 CFR 571.138 - Standard No. 138; Tire pressure monitoring systems.

    Science.gov (United States)

    2010-10-01

    ... system that meets the requirements specified in S4 under the test conditions specified in S5 and the test... inflation pressure in one or more of the vehicle's tires, up to a total of four tires, is equal to or less... pressure, or the pressure specified in the 3rd column of Table 1 of this standard for the corresponding...

  13. 40 CFR 264.1087 - Standards: Closed-vent systems and control devices.

    Science.gov (United States)

    2010-07-01

    ...: (1) The closed-vent system shall route the gases, vapors, and fumes emitted from the hazardous waste in the waste management unit to a control device that meets the requirements specified in paragraph... (CONTINUED) SOLID WASTES (CONTINUED) STANDARDS FOR OWNERS AND OPERATORS OF HAZARDOUS WASTE TREATMENT, STORAGE...

  14. Media Representations of National and International Standardized Testing in the Israeli Education System

    Science.gov (United States)

    Yemini, Miri; Gordon, Noa

    2017-01-01

    This study applies discourse analysis to Israeli media coverage of national and international standardized examinations within Israel's public education system. Through systematic analysis of the topic in the two main Israeli financial publications between the years 2000 and 2013, we explore the nature and narrative of the media and compare the…

  15. Combining economic and social goals in the design of production systems by using ergonomics standards

    NARCIS (Netherlands)

    J. Dul (Jan); H.J. de Vries (Henk); S. Verschoof (Sandra); W. Eveleens (Wietske); A. Feilzer (Albert)

    2004-01-01

    textabstractIn designing of production systems, economic and social goals can be combined, if ergonomics is integrated into the design process. More than 50 years of ergonomics research and practice have resulted in a large number of ergonomics standards for designing physical and organizational

  16. Standardized Reporting System Use During Handoffs Reduces Patient Length of Stay in the Emergency Department.

    Science.gov (United States)

    Dahlquist, Robert T; Reyner, Karina; Robinson, Richard D; Farzad, Ali; Laureano-Phillips, Jessica; Garrett, John S; Young, Joseph M; Zenarosa, Nestor R; Wang, Hao

    2018-05-01

    Emergency department (ED) shift handoffs are potential sources of delay in care. We aimed to determine the impact that using standardized reporting tool and process may have on throughput metrics for patients undergoing a transition of care at shift change. We performed a prospective, pre- and post-intervention quality improvement study from September 1 to November 30, 2015. A handoff procedure intervention, including a mandatory workshop and personnel training on a standard reporting system template, was implemented. The primary endpoint was patient length of stay (LOS). A comparative analysis of differences between patient LOS and various handoff communication methods were assessed pre- and post-intervention. Communication methods were entered a multivariable logistic regression model independently as risk factors for patient LOS. The final analysis included 1,006 patients, with 327 comprising the pre-intervention and 679 comprising the post-intervention populations. Bedside rounding occurred 45% of the time without a standard reporting during pre-intervention and increased to 85% of the time with the use of a standard reporting system in the post-intervention period (P reporting system during handoff was associated with shortened ED LOS (OR = 0.60, 95% CI 0.40 - 0.90, P reporting system use during emergency physician handoffs at shift change improves ED throughput efficiency and is associated with shorter ED LOS.

  17. 25 CFR 276.7 - Standards for grantee financial management systems.

    Science.gov (United States)

    2010-04-01

    ... 25 Indians 1 2010-04-01 2010-04-01 false Standards for grantee financial management systems. 276.7... of the financial results of each grant program in accordance with Federal reporting requirements and... law, the Bureau wll not require financial reporting on the accrual basis from tribal organizations...

  18. 40 CFR 63.172 - Standards: Closed-vent systems and control devices.

    Science.gov (United States)

    2010-07-01

    ...) Equipment such as low leg drains, high point bleeds, analyzer vents, open-ended valves or lines, and pressure relief valves needed for safety purposes are not subject to this paragraph. (k) Any parts of the... 40 Protection of Environment 9 2010-07-01 2010-07-01 false Standards: Closed-vent systems and...

  19. 40 CFR 63.693 - Standards: Closed-vent systems and control devices.

    Science.gov (United States)

    2010-07-01

    ... complying with this paragraph (c)(2), low leg drains, high point bleeds, analyzer vents, open-ended valves or lines, or pressure relief valves needed for safety reasons are not subject to the requirements of... 40 Protection of Environment 10 2010-07-01 2010-07-01 false Standards: Closed-vent systems and...

  20. 75 FR 51521 - Federal Motor Vehicle Safety Standards; Air Brake Systems; Technical Report on the Effectiveness...

    Science.gov (United States)

    2010-08-20

    ...-0116] Federal Motor Vehicle Safety Standards; Air Brake Systems; Technical Report on the Effectiveness... report. SUMMARY: This notice announces NHTSA's publication of a Technical Report its existing Safety..., 2010. ADDRESSES: Report: The technical report is available on the Internet for viewing in PDF format at...

  1. 76 FR 42534 - Mandatory Reliability Standards for Interconnection Reliability Operating Limits; System...

    Science.gov (United States)

    2011-07-19

    ... Reliability Operating Limits; System Restoration Reliability Standards AGENCY: Federal Energy Regulatory... data necessary to analyze and monitor Interconnection Reliability Operating Limits (IROL) within its... Interconnection Reliability Operating Limits, Order No. 748, 134 FERC ] 61,213 (2011). \\2\\ The term ``Wide-Area...

  2. The Phantom National? Assembling National Teaching Standards in Australia's Federal System

    Science.gov (United States)

    Savage, Glenn C.; Lewis, Steven

    2018-01-01

    In this paper, we use the development of the Australian Professional Standards for Teachers (APST) as an illustrative case to examine how national schooling reforms are assembled in Australia's federal system. Drawing upon an emerging body of research on "policy assemblage" within the fields of policy sociology, anthropology and critical…

  3. 77 FR 18689 - Changes to Standard Numbering System, Vessel Identification System, and Boating Accident Report...

    Science.gov (United States)

    2012-03-28

    .... Indian Tribal Governments K. Energy Effects L. Technical Standards M. Environment I. Abbreviations BARD... function. State government officials with recreational boating responsibilities submitted most of the...' ability to analyze historical data or that risk data corruption during database updates. One of these...

  4. Technical Standards for Command and Control Information Systems (CCISs) and Information Technology

    Science.gov (United States)

    1994-02-01

    Submission to ISO Through ANSI .......................................................................... 323 xxi UNCLASSIFIED UNCLASSIFIED 0 Table 40...TmnspoX 4 • P. XX 4~ XXI 0 S---Om XXM2 < )𔃾 A Z XU11 XX:r 4b-XX41 Chapter 16 347 Standrdize Profiles UNCLASSIFIED 0A WMM -t-X 3n X = UNCLASSIFIED...doninated programa , tactical commnimacations systems designed to comon standards S 012 on Information Systems0 *WG2 on Dam Nocessing mad Muafaeenta -AHWG

  5. Establishment of a tandem ionization chamber system in standard mammography beams

    International Nuclear Information System (INIS)

    Silva, Jonas O. da; Caldas, L.V.E.

    2011-01-01

    A double-faced tandem ionization chamber system was developed at the Calibration Laboratory of IPEN. It has different collecting electrode materials: aluminium and graphite. The response repeatability and reproducibility and the energy dependence test of this tandem ionization chamber were evaluated. The chamber response stability is within the ±3% limit recommended in international standards. The energy dependence test of the ionization chamber system using the tandem curve obtained, presented agreement with literature results. (author)

  6. Extracting and standardizing medication information in clinical text - the MedEx-UIMA system.

    Science.gov (United States)

    Jiang, Min; Wu, Yonghui; Shah, Anushi; Priyanka, Priyanka; Denny, Joshua C; Xu, Hua

    2014-01-01

    Extraction of medication information embedded in clinical text is important for research using electronic health records (EHRs). However, most of current medication information extraction systems identify drug and signature entities without mapping them to standard representation. In this study, we introduced the open source Java implementation of MedEx, an existing high-performance medication information extraction system, based on the Unstructured Information Management Architecture (UIMA) framework. In addition, we developed new encoding modules in the MedEx-UIMA system, which mapped an extracted drug name/dose/form to both generalized and specific RxNorm concepts and translated drug frequency information to ISO standard. We processed 826 documents by both systems and verified that MedEx-UIMA and MedEx (the Python version) performed similarly by comparing both results. Using two manually annotated test sets that contained 300 drug entries from medication list and 300 drug entries from narrative reports, the MedEx-UIMA system achieved F-measures of 98.5% and 97.5% respectively for encoding drug names to corresponding RxNorm generic drug ingredients, and F-measures of 85.4% and 88.1% respectively for mapping drug names/dose/form to the most specific RxNorm concepts. It also achieved an F-measure of 90.4% for normalizing frequency information to ISO standard. The open source MedEx-UIMA system is freely available online at http://code.google.com/p/medex-uima/.

  7. A systems approach to accepted standards of care: Shifting the blame

    Directory of Open Access Journals (Sweden)

    David G. Glance

    2011-09-01

    Full Text Available In healthcare, from a legal perspective, the standard ofacceptable practice has been generally set by the courts anddefined as healthcare professionals acting in a manner thatis widely accepted by their peers as meeting an acceptablestandard of care. This view, however, reflects the state ofhow practice “is” rather than what it “ought to be”. What isought to be depends on whether you take a “person” or“system” oriented approach to practice.The increasing pressures of lack of money and resources,and an ever-increasing need for care are bringing pressureon the health services to move to a system approach andthis is gaining acceptance both with clinicians and thuseventually the courts.A systems-type approach to healthcare will, by necessity,embrace clinical protocols and guidelines supported byclinical information systems. It will also see blame for errorsshifting from clinicians to the organisations that employthem.This paper argues that a continued use of a person-basedapproach to healthcare, developed through an historicalrecord of practice by individual clinicians, is no longeradequate defence in a case of supposed negligence.When the healthcare system has codified clinical guidelinesand digital data gathered across thousands of clinicians andtheir patients, it is possible to compute adequate levels ofcare and expect clinicians and the healthcare system ingeneral to meet these minimum standards.Future negligence decisions will rely on a systems-basedbest practice standard of care determined through evidencerather than opinion

  8. A versatile multidimensional protein purification system with full internet remote control based on a standard HPLC system.

    Science.gov (United States)

    Riek, Uwe; Ramirez, Sacnicte; Wallimann, Theo; Schlattner, Uwe

    2009-05-01

    The standard Akta Explorer high-performance liquid chromatography (HPLC) system has limitations for the automation of multidimensional protein purification. Here, we describe simple modifications that allow for automated multidimensional purification protocols to extend the possibilities of the Akta three-dimensional purification kit in terms of column number, flexibility of volumes stocked for re-injection of samples, and available choice of buffers. These modifications do not preclude the use of standard one-dimensional purification protocols. Additionally, we demonstrate a technology for encrypted full remote control of the machine over the Internet by cost-effective use of standard asymmetric digital subscriber line (ADSL) that enables direct remote interaction with the machine without preventing local control. A 4-column purification scheme, including equilibration and cleaning in place (CIP) procedures, was implemented on such a system. It significantly increased reproducibility and shortened processing time by 85%, as compared with manual operation, thus allowing for automated protein purification overnight.

  9. Standard practices for verification of displacement measuring systems and devices used in material testing machines

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2005-01-01

    1.1 These practices cover procedures and requirements for the calibration and verification of displacement measuring systems by means of standard calibration devices for static and quasi-static testing machines. This practice is not intended to be complete purchase specifications for testing machines or displacement measuring systems. Displacement measuring systems are not intended to be used for the determination of strain. See Practice E83. 1.2 These procedures apply to the verification of the displacement measuring systems associated with the testing machine, such as a scale, dial, marked or unmarked recorder chart, digital display, etc. In all cases the buyer/owner/user must designate the displacement-measuring system(s) to be verified. 1.3 The values stated in either SI units or inch-pound units are to be regarded separately as standard. The values stated in each system may not be exact equivalents; therefore, each system shall be used independently of the other. Combining values from the two systems m...

  10. Review of Special Standards in Quality Management Systems Audits in Automotive Production

    Science.gov (United States)

    Šurinová, Yulia

    2013-12-01

    Quality management systems (QMS) in automotive industry generally have several differences in comparison with other industrial branches. Different customers have their own specific requirements, including requirements for quality audits. Audits are one of the coretools of quality management to make the PDCA (Plan - Do - Check - Act) cycle work. As a matter of fact, compliance with ISO/TS 16949:2009 requirements is a condition for supplying the automotive industry. However, there are some standards which co-exist together with the ISO 9001 based management systems and technical specification for QMS in automotive ISO/TS16949. Which are those specific standards in automotive industry and what standard to use and why - those are the questions to be answered in this paper. The aim of the paper is to review what standards are used for audits implementation in automotive industry in the Slovak Republic, and why the organizations keep following those "extra" standards even if certification for ISO/TS 16949 is required by all the car makers. The paper is structured as follows: after short introduction to the topic and related terms, presented is our methodology. . In the third section, the achieved results are discussed. And finally, the principal findings of the paper, limitations and conclusions are presented.

  11. Developing a Standard Method of Test for Packaged, Solid-Desiccant Based Dehumidification Systems

    International Nuclear Information System (INIS)

    Sand, J.R.

    2001-01-01

    A draft Method of Test (MOT) has been proposed for packaged, air-to-air, desiccant-based dehumidifier systems that incorporate a thermally-regenerated desiccant material for dehumidification. This MOT is intended to function as the ''system'' testing and rating compliment to the desiccant ''component'' (desiccant wheels and/or cassettes) MOT (ASHRAE 1998) and rating standard (ARI 1998) already adopted by industry. This draft standard applies to ''packaged systems'' that: Use desiccants for dehumidification of conditioned air for buildings; Use heated air for regeneration of the desiccant material; Include fans for moving process and regeneration air; May include other system components for filtering, pre-cooling, post-cooling, or heating conditioned air; and May include other components for humidification of conditioned air. The proposed draft applies to four different system operating modes depending on whether outdoor or indoor air is used for process air and regeneration air streams . Only the ''ventilation'' mode which uses outdoor air for both process and regeneration inlets is evaluated in this paper. Performance of the dehumidification system is presented in terms that would be most familiar and useful to designers of building HVAC systems to facilitate integration of desiccant equipment with more conventional hardware. Parametric performance results from a modified, commercial desiccant dehumidifier undergoing laboratory testing were used as data input to evaluate the draft standard. Performance results calculated from this experimental input, results from an error-checking/heat-balance verification test built into the standard, and estimated comparisons between desiccant and similarly performing conventional dehumidification equipment are calculated and presented. Some variations in test procedures are suggested to aid in analytical assessment of individual component performance

  12. Standard comparison of local mental health care systems in eight European countries.

    Science.gov (United States)

    Gutiérrez-Colosía, M R; Salvador-Carulla, L; Salinas-Pérez, J A; García-Alonso, C R; Cid, J; Salazzari, D; Montagni, I; Tedeschi, F; Cetrano, G; Chevreul, K; Kalseth, J; Hagmair, G; Straßmayr, C; Park, A L; Sfectu, R; Ala-Nikkola, T; González-Caballero, J L; Rabbi, L; Kalseth, B; Amaddeo, F

    2017-09-18

    There is a need of more quantitative standardised data to compare local Mental Health Systems (MHSs) across international jurisdictions. Problems related to terminological variability and commensurability in the evaluation of services hamper like-with-like comparisons and hinder the development of work in this area. This study was aimed to provide standard assessment and comparison of MHS in selected local areas in Europe, contributing to a better understanding of MHS and related allocation of resources at local level and to lessen the scarcity in standard service comparison in Europe. This study is part of the Seventh Framework programme REFINEMENT (Research on Financing Systems' Effect on the Quality of Mental Health Care in Europe) project. A total of eight study areas from European countries with different systems of care (Austria, England, Finland, France, Italy, Norway, Romania, Spain) were analysed using a standard open-access classification system (Description and Evaluation of Services for Long Term Care in Europe, DESDE-LTC). All publicly funded services universally accessible to adults (≥18 years) with a psychiatric disorder were coded. Care availability, diversity and capacity were compared across these eight local MHS. The comparison of MHS revealed more community-oriented delivery systems in the areas of England (Hampshire) and Southern European countries (Verona - Italy and Girona - Spain). Community-oriented systems with a higher proportion of hospital care were identified in Austria (Industrieviertel) and Scandinavian countries (Sør-Trøndelag in Norway and Helsinki-Uusimaa in Finland), while Loiret (France) was considered as a predominantly hospital-based system. The MHS in Suceava (Romania) was still in transition to community care. There is a significant variation in care availability and capacity across MHS of local areas in Europe. This information is relevant for understanding the process of implementation of community-oriented mental

  13. NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health

    Science.gov (United States)

    Holubec, Keith; Connolly, Janis

    2010-01-01

    This slide presentation reviews the history, and development of NASA-STD-3001, NASA Space Flight Human-System Standard Human Factors, Habitability, and Environmental Health, and the related Human Integration Design Handbook. Currently being developed from NASA-STD-3000, this project standard currently in review will be available in two volumes, (i.e., Volume 1 -- VCrew Health and Volume 2 -- Human Factors, Habitability, and Environmental Health) and the handbook will be both available as a pdf file and as a interactive website.

  14. Panel C report: Standards needed for the use of ISO Open Systems Interconnection - basic reference model

    Science.gov (United States)

    1981-01-01

    The use of an International Standards Organization (ISO) Open Systems Interconnection (OSI) Reference Model and its relevance to interconnecting an Applications Data Service (ADS) pilot program for data sharing is discussed. A top level mapping between the conjectured ADS requirements and identified layers within the OSI Reference Model was performed. It was concluded that the OSI model represents an orderly architecture for the ADS networking planning and that the protocols being developed by the National Bureau of Standards offer the best available implementation approach.

  15. An automated standardized system for managing adverse events in clinical research networks.

    Science.gov (United States)

    Richesson, Rachel L; Malloy, Jamie F; Paulus, Kathleen; Cuthbertson, David; Krischer, Jeffrey P

    2008-01-01

    Multi-site clinical protocols and clinical research networks require tools to manage and monitor adverse events (AEs). To be successful, these tools must be designed to comply with applicable regulatory requirements, reflect current data standards, international directives and advances in pharmacovigilance, and be convenient and adaptable to multiple needs. We describe an Adverse Event Data Management System (AEDAMS) that is used across multiple study designs in the various clinical research networks and multi-site studies for which we provide data and technological support. Investigators enter AE data using a standardized and structured web-based data collection form. The automated AEDAMS forwards the AE information to individuals in designated roles (investigators, sponsors, Data Safety and Monitoring Boards) and manages subsequent communications in real time, as the entire reporting, review and notification is done by automatically generated emails. The system was designed to adhere to timelines and data requirements in compliance with Good Clinical Practice (International Conference on Harmonisation E6) reporting standards and US federal regulations, and can be configured to support AE management for many types of study designs and adhere to various domestic or international reporting requirements. This tool allows AEs to be collected in a standard way by multiple distributed users, facilitates accurate and timely AE reporting and reviews, and allows the centralized management of AEs. Our design justification and experience with the system are described.

  16. National Incident Management System (NIMS) Standards Review Panel Workshop Summary Report

    Energy Technology Data Exchange (ETDEWEB)

    Stenner, Robert D.; Kirk, Jennifer L.; Stanton, James R.; Shebell, Peter; Schwartz, Deborah S.; Judd, Kathleen S.; Gelston, Gariann M.

    2006-02-07

    The importance and need for full compliant implementation of NIMS nationwide was clearly demonstrated during the Hurricane Katrina event, which was clearly expressed in Secretary Chertoff's October 4, 2005 letter addressed to the State's governors. It states, ''Hurricane Katrina was a stark reminder of how critical it is for our nation to approach incident management in a coordinated, consistent, and efficient manner. We must be able to come together, at all levels of government, to prevent, prepare for, respond to, and recover from any emergency or disaster. Our operations must be seamless and based on common incident management doctrine, because the challenges we face as a nation are far greater than capabilities of any one jurisdiction.'' The NIMS is a system/architecture for organizing response on a ''national'' level. It incorporations ICS as a main component of that structure (i.e., it institutionalizes ICS in NIMS). In a paper published on the NIMS Website, the following statements were made: ''NIMS represents a core set of doctrine, principles, terminology, and organizational processes to enable effective, efficient and collaborative incident management at all levels. To provide the framework for interoperability and compatibility, the NIMS is based on a balance between flexibility and standardization.'' Thus the NIC is challenged with the need to adopt quality SDO generated standards to support NIMS compliance, but in doing so maintain the flexibility necessary so that response operations can be tailored for the specific jurisdictional and geographical needs across the nation. In support of this large and complex challenge facing the NIC, the Pacific Northwest National Laboratory (PNNL) was asked to provide technical support to the NIC, through their DHS Science and Technology ? Standards Portfolio Contract, to help identify, review, and develop key standards for NIMS compliance. Upon

  17. Research on the General Framework of the Construction of Nuclear and Radiation Safety Standard System in China

    Science.gov (United States)

    Song, Dahu; Liu, Ting; Gao, Siyi; Tian, Yu; Yang, Lili; Zhang, Qiaoer

    2018-01-01

    In this paper, the general framework and suggestion for the construction of China Nuclear and radiation safety standard system are put forward. The relationship of nuclear and radiation safety standards with the relevant laws and regulations is discussed. The status quo, existing problems and requirements of nuclear and radiation safety standard are analysed in China. The research work has laid a foundation for the establishment and improvement of China’s nuclear and radiation safety standards system, and has made a useful exploration.

  18. Development of image and information management system for Korean standard brain

    Science.gov (United States)

    Chung, Soon Cheol; Choi, Do Young; Tack, Gye Rae; Sohn, Jin Hun

    2004-04-01

    The purpose of this study is to establish a reference for image acquisition for completing a standard brain for diverse Korean population, and to develop database management system that saves and manages acquired brain images and personal information of subjects. 3D MP-RAGE (Magnetization Prepared Rapid Gradient Echo) technique which has excellent Signal to Noise Ratio (SNR) and Contrast to Noise Ratio (CNR) as well as reduces image acquisition time was selected for anatomical image acquisition, and parameter values were obtained for the optimal image acquisition. Using these standards, image data of 121 young adults (early twenties) were obtained and stored in the system. System was designed to obtain, save, and manage not only anatomical image data but also subjects' basic demographic factors, medical history, handedness inventory, state-trait anxiety inventory, A-type personality inventory, self-assessment depression inventory, mini-mental state examination, intelligence test, and results of personality test via a survey questionnaire. Additionally this system was designed to have functions of saving, inserting, deleting, searching, and printing image data and personal information of subjects, and to have accessibility to them as well as automatic connection setup with ODBC. This newly developed system may have major contribution to the completion of a standard brain for diverse Korean population since it can save and manage their image data and personal information.

  19. An adaptive software defined radio design based on a standard space telecommunication radio system API

    Science.gov (United States)

    Xiong, Wenhao; Tian, Xin; Chen, Genshe; Pham, Khanh; Blasch, Erik

    2017-05-01

    Software defined radio (SDR) has become a popular tool for the implementation and testing for communications performance. The advantage of the SDR approach includes: a re-configurable design, adaptive response to changing conditions, efficient development, and highly versatile implementation. In order to understand the benefits of SDR, the space telecommunication radio system (STRS) was proposed by NASA Glenn research center (GRC) along with the standard application program interface (API) structure. Each component of the system uses a well-defined API to communicate with other components. The benefit of standard API is to relax the platform limitation of each component for addition options. For example, the waveform generating process can support a field programmable gate array (FPGA), personal computer (PC), or an embedded system. As long as the API defines the requirements, the generated waveform selection will work with the complete system. In this paper, we demonstrate the design and development of adaptive SDR following the STRS and standard API protocol. We introduce step by step the SDR testbed system including the controlling graphic user interface (GUI), database, GNU radio hardware control, and universal software radio peripheral (USRP) tranceiving front end. In addition, a performance evaluation in shown on the effectiveness of the SDR approach for space telecommunication.

  20. Optimal synthesis and operation of advanced energy supply systems for standard and domotic home

    International Nuclear Information System (INIS)

    Buoro, Dario; Casisi, Melchiorre; Pinamonti, Piero; Reini, Mauro

    2012-01-01

    Highlights: ► Definition of an optimization model for a home energy supply system. ► Optimization of the energy supply system for standard and domotic home. ► Strong improvement can be achieved adopting the optimal system in standard and domotic home. ► The improvements are consistent if supply side and demand side strategies are applied together. ► Solutions with internal combustion engines are less sensible to market price of electricity and gas. - Abstract: The paper deals with the optimization of an advanced energy supply systems for two dwellings: a standard home and an advanced domotic home, where some demand side energy saving strategies have been implemented. In both cases the optimal synthesis, design and operation of the whole energy supply system have been obtained and a sensitivity analysis has been performed, by introducing different economic constraints. The optimization model is based on a Mixed Integer Linear Program (MILP) and includes different kinds of small-scale cogenerators, geothermal heat pumps, boilers, heat storages, solar thermal and photovoltaic panels. In addition, absorption machines, supplied with cogenerated heat, can be used instead of conventional electrical chiller to face the cooling demand. The aim of the analysis is to address the question if advanced demand strategies and supply strategies have to be regarded as alternatives, or if they have to be simultaneously applied, in order to obtain the maximum energy and economic benefit.

  1. MUSQA: a CS method to build a multi-standard quality management system

    Science.gov (United States)

    Cros, Elizabeth; Sneed, Isabelle

    2002-07-01

    CS Communication & Systèmes, through its long quality management experience, has been able to build and evolve its Quality Management System according to clients requirements, norms, standards and models (ISO, DO178, ECSS, CMM, ...), evolving norms (transition from ISO 9001:1994 to ISO 9001:2000) and the TQM approach, being currently deployed. The aim of this paper is to show how, from this enriching and instructive experience, CS has defined and formalised its method: MuSQA (Multi-Standard Quality Approach). This method allows to built a new Quality Management System or simplify and unify an existing one. MuSQA objective is to provide any organisation with an open Quality Management System, which is able to evolve easily and turns to be a useful instrument for everyone, operational as well as non-operational staff.

  2. International Standardization in the Design of "Shore to Ship" - Power Supply Systems of Ships in Port

    Science.gov (United States)

    Tarnapowicz, Dariusz; German-Galkin, Sergiej

    2018-03-01

    The decisive source of air pollution emissions in ports is the berthed ships. This is primarily caused by the work of ship's autonomous generator sets. One way of reducing the air pollution emissions in ports is the supply of ships from electricity inland system. The main problem connected with the power connection of ships to the inland network is caused by different values of levels and frequencies of voltages in these networks (in various countries) in relation to different values of levels and frequencies of voltages present in the ship's network. It is also important that the source power can range from a few hundred kW up to several MW. In order to realize a universal „Shore to Ship" system that allows the connection of ships to the electricity inland network, the international standardization is necessary. This article presents the current recommendations, standards and regulations for the design of „Shore to Ship" systems.

  3. A CAMAC-system crate interface based on EUR 6100 standards

    International Nuclear Information System (INIS)

    Wolstenholme, P.; Verelst, H.; Parker, C.R.C.B.

    1980-01-01

    The particle beams in the Intersecting Storage Rings of the CERN accelerator are controlled by means of a CAMAC Branch Highway and three CAMAC Serial Highway Systems. The highway controllers, housed in system crates, are driven by crate controllers interfaced to the control computers. The crate controllers are implemented as auxiliary controllers and are PROM based to allow N, A and F to be generated from a small zone of computer addresses and are largely transparent to the host computer. The concept has enabled standard modules and techniques taken from the Serial Highway to be adopted for use in system crates. (Auth.)

  4. The SEMAINE API: Towards a Standards-Based Framework for Building Emotion-Oriented Systems

    Directory of Open Access Journals (Sweden)

    Marc Schröder

    2010-01-01

    Full Text Available This paper presents the SEMAINE API, an open source framework for building emotion-oriented systems. By encouraging and simplifying the use of standard representation formats, the framework aims to contribute to interoperability and reuse of system components in the research community. By providing a Java and C++ wrapper around a message-oriented middleware, the API makes it easy to integrate components running on different operating systems and written in different programming languages. The SEMAINE system 1.0 is presented as an example of a full-scale system built on top of the SEMAINE API. Three small example systems are described in detail to illustrate how integration between existing and new components is realised with minimal effort.

  5. New standard on safety for hydrogen systems in spanish. Keys for understanding and use

    Energy Technology Data Exchange (ETDEWEB)

    Luis Aprea, Jose [CNEA, Argentine Atomic Energy Commission - AAH - IRAM - Comahue University, CC 805 - Neuquen (Argentina)

    2008-07-15

    The present paper approaches all the preliminary, normative and additional elements observed during the work carried out by the Argentine standardization board to count in the country with a normative document that covers the expectations of the local community of users and other Spanish-speaking user, about the integral safety for the hydrogen systems. The antecedents and the process of adoption of an international standard and its adaptation to the local media are analyzed. The result has been the Standard IRAM/ISO 15916 that intends to offer, to all the users and especially to those who are not familiar with the technology, a base to understand the subject of safety, thus enhancing the education of the general public in hydrogen safety matters. (author)

  6. Color Standardization Method and System for Whole Slide Imaging Based on Spectral Sensing

    Directory of Open Access Journals (Sweden)

    Shinsuke Tani

    2012-01-01

    Full Text Available In the field of whole slide imaging, the imaging device or staining process cause color variations for each slide that affect the result of image analysis made by pathologist. In order to stabilize the analysis, we developed a color standardization method and system as described below: 1 Color standardization method based on RGB imaging and multi spectral sensing, which utilize less band (16 bands than conventional method (60 bands, 2 High speed spectral sensing module. As a result, we confirmed the following effect: 1 We confirmed the performance improvement of nucleus detection by the color standardization. And we can conduct without training data set which is needed in conventional method, 2 We can get detection performance of H&E component equivalent to conventional method (60 bands. And measurement process is more than 255 times faster.

  7. Development of a consensus standard for verification and validation of nuclear system thermal-fluids software

    International Nuclear Information System (INIS)

    Harvego, Edwin A.; Schultz, Richard R.; Crane, Ryan L.

    2011-01-01

    With the resurgence of nuclear power and increased interest in advanced nuclear reactors as an option to supply abundant energy without the associated greenhouse gas emissions of the more conventional fossil fuel energy sources, there is a need to establish internationally recognized standards for the verification and validation (V and V) of software used to calculate the thermal–hydraulic behavior of advanced reactor designs for both normal operation and hypothetical accident conditions. To address this need, ASME (American Society of Mechanical Engineers) Standards and Certification has established the V and V 30 Committee, under the jurisdiction of the V and V Standards Committee, to develop a consensus standard for verification and validation of software used for design and analysis of advanced reactor systems. The initial focus of this committee will be on the V and V of system analysis and computational fluid dynamics (CFD) software for nuclear applications. To limit the scope of the effort, the committee will further limit its focus to software to be used in the licensing of High-Temperature Gas-Cooled Reactors. Although software verification will be an important and necessary part of the standard, much of the initial effort of the committee will be focused on the validation of existing software and new models that could be used in the licensing process. In this framework, the Standard should conform to Nuclear Regulatory Commission (NRC) and other regulatory practices, procedures and methods for licensing of nuclear power plants as embodied in the United States (U.S.) Code of Federal Regulations and other pertinent documents such as Regulatory Guide 1.203, “Transient and Accident Analysis Methods” and NUREG-0800, “NRC Standard Review Plan”. In addition, the Standard should be consistent with applicable sections of ASME NQA-1-2008 “Quality Assurance Requirements for Nuclear Facility Applications (QA)”. This paper describes the general

  8. Implementing an integrated standards-based management system to ensure compliance at Los Alamos National Laboratory

    International Nuclear Information System (INIS)

    Hjeresen, D.; Roybal, S.; Bertino, P.; Gherman, C.; Hosteny, B.

    1995-01-01

    Los Alamos National Laboratory (LANL or the Laboratory) is developing and implementing a comprehensive, Integrated Standards-Based Management System (ISBMS) to enhance environmental, safety, and health (ESH) compliance efforts and streamline management of ESH throughout the Laboratory. The Laboratory recognizes that to be competitive in today's business environment and attractive to potential Partnerships, Laboratory operations must be efficient and cost-effective. The Laboratory also realizes potential growth opportunities for developing ESH as a strength in providing new or improved services to its customers. Overall, the Laboratory desires to establish and build upon an ESH management system which ensures continuous improvement in protecting public health and safety and the environment and which fosters a working relationship with stakeholders. A team of process experts from the LANL Environmental Management (EM) Program Office, worked with management system consultants, and the Department of Energy (DOE) to develop an ESH management systems process to compare current LANL ESH management Systems and programs against leading industry standards. The process enabled the Laboratory to gauge its performance in each of the following areas: Planning and Policy Setting; Systems and Procedures; Implementation and Education; and Monitoring and Reporting. The information gathered on ESH management systems enabled LANL to pinpoint and prioritize opportunities for improvement in the provision of ESH services throughout the Laboratory and ultimately overall ESH compliance

  9. A Robotics Systems Design Need: A Design Standard to Provide the Systems Focus that is Required for Longterm Exploration Efforts

    Science.gov (United States)

    Dischinger, H. Charles., Jr.; Mullins, Jeffrey B.

    2005-01-01

    The United States is entering a new period of human exploration of the inner Solar System, and robotic human helpers will be partners in that effort. In order to support integration of these new worker robots into existing and new human systems, a new design standard should be developed, to be called the Robot-Systems Integration Standard (RSIS). It will address the requirements for and constraints upon robotic collaborators with humans. These workers are subject to the same functional constraints as humans of work, reach, and visibility/situational awareness envelopes, and they will deal with the same maintenance and communication interfaces. Thus, the RSIS will be created by discipline experts with the same sort of perspective on these and other interface concerns as human engineers.

  10. Transition from closed system to Internet of Things: A study in standardizing building lighting systems

    NARCIS (Netherlands)

    Mathews, E.; Muller, G.

    2016-01-01

    Internet of Things (IoT) is triggering changes in lighting industry from the traditional closed and propriety systems to flexible, interoperable and service oriented systems. To address the challenges of this transition and catering the specific requirements of lighting networks, an Open

  11. The Reliability of a Standardized Reporting System for the Diagnosis of Appendicitis.

    Science.gov (United States)

    Simianu, Vlad V; Shamitoff, Anna; Hippe, Daniel S; Godwin, Benjamin D; Shriki, Jabi E; Drake, Frederick T; O'Malley, Ryan B; Maximin, Suresh; Bastawrous, Sarah; Moshiri, Mariam; Lee, Jean H; Cuevas, Carlos; Dighe, Manjiri; Flum, David; Bhargava, Puneet

    Computed tomography (CT) is a fast and ubiquitous tool to evaluate intra-abdominal organs and diagnose appendicitis. However, traditional CT reporting does not necessarily capture the degree of uncertainty and indeterminate findings are still common. The purpose of this study was to evaluate the reproducibility of a standardized CT reporting system for appendicitis across a large population and the system's impact on radiologists' certainty in diagnosing appendicitis. Using a previously described standardized reporting system, eight radiologists retrospectively evaluated CT scans, blinded to all clinical information, in a stratified random sample of 237 patients from a larger cohort of patients imaged for possible appendicitis (2010-2014). Receiver operating characteristic (ROC) curves and the area under the ROC curve (AUC) were used to evaluate the diagnostic performance of readers for identifying appendicitis. Two-thirds of these scans were randomly selected to be independently read by a second reader, using the original CT reports to balance the number of positive, negative and indeterminate exams across all readers. Inter-reader agreement was evaluated. There were 113 patients with appendicitis (mean age 38, 67% male). Using the standardized report, radiologists were highly accurate at identifying appendicitis (AUC=0.968, 95%CI confidence interval: 0.95, 0.99. Inter-reader agreement was >80% for most objective findings, and certainty in diagnosing appendicitis was high and reproducible (AUC=0.955 and AUC=0.936 for the first and second readers, respectively). Using a standardized reporting system resulted in high reproducibility of objective CT findings for appendicitis and achieved high diagnostic accuracy in an at-risk population. Predictive tools based on this reporting system may further improve communication about certainty in diagnosis and guide patient management, especially when CT findings are indeterminate. Copyright © 2017 Elsevier Inc. All rights

  12. PROPOSAL METHODOLOGY OF THE SUBSYSTEM - INTERNAL STANDARDIZATION AS PART OF TQM SYSTEM

    Directory of Open Access Journals (Sweden)

    Elizabeta Mitreva

    2012-09-01

    Full Text Available Standardization in the management system becomes a key task of the managers and a priority issue for survival of every organization of this century. Besides the company's owner which is mostly concerned with the profit and fast multiplication of its invested capital, many other parties such as consumers, community, employees, deliverers and the society make a pressure in demanding. As of those demands the organization is to adapt its management system according the standards in order to be safe t hat the expectations will be fulfilled. However, to fulfill the standards in Europe and worldwide it is necessary to approach towards huge - radical changes in problem solving i.e. reengineering, new manner of consideration of causes and not as the so far known way - thinking over the consequences. Implementing this new TQM strategy means designing solidly documented quality system that covers every working process in a company and appears as a necessary base for successful usage of statistical process contr ol (SPC and efficient teamwork which otherwise in case of bad quality system will not be able to be set. In this manner it is guaranteed that the attitude of the top management is conducted; this attitude is consisted within the quality policy that create s a climate and information base whe re team work can be developed. This paper offers a proposal methodology for designing and implementation of internal standardization of TQM system in companies. This methodology is applicable in factory for reconstructio n of wagons and in a factory for confectionary production and has shown its efficiency and usage. In order to design the processes in line with the consumers/ clients content and at the same time to achieve profitability, it is necessary to reengineer the working processes

  13. 25 CFR 547.10 - What are the minimum standards for Class II gaming system critical events?

    Science.gov (United States)

    2010-04-01

    ... GAMES § 547.10 What are the minimum standards for Class II gaming system critical events? This section provides standards for events such as system critical faults, deactivation, door open or other changes of...-correctable critical memory error has occurred, the data on the Class II gaming system component can no longer...

  14. Improving the review of standard operating procedures: a novel electronic system for compounding pharmacies.

    Science.gov (United States)

    Brensel, Robert; Brensel, Scott; Ng, Amy

    2013-01-01

    Since the New England Compounding Center disaster in 2012, the importance of following correct procedures during every phase of customized pharmacy has been a focus of governmental interest and action as well as public scrutiny. Many pharmacies rely on the rote review of standard operating procedures to ensure that staff members understand and follow protocols that ensure the safety and potency of all compounds prepared, but that approach to continuing education can be cumbersome and needlessly time-consuming. In addition, documenting and retrieving evidence of employee competence can be difficult. In this article, we describe our use of online technology to improve our methods of educating staff about the full range of standard operating procedures that must be followed in our pharmacy. The system we devised and implemented has proven to be effective, easy to update and maintain, very inexpensive, and user friendly. Its use has reduced the time previously required for a read-over review of standard operating procedures from 30 or 40 minutes to 5 or 10 minutes in weekly staff meetings, and we can now easily document and access proof of employees' comprehension of that content. It is our hope that other small compounding pharmacies will also find this system of online standard operating procedure review helpful.

  15. Standardization of Compton suppression gamma spectrometry system for the measurement of 129I in environmental samples

    International Nuclear Information System (INIS)

    Baburajan, A.; Sudheendran, V.; Dalvi, Sushant S.; Ravi, P.M.; Tripathi, R.M.

    2014-01-01

    This paper presents the results of standardization of a Compton Suppression Gamma spectrometry system for the determination of 129 I in various environmental samples in the pathways of Air - grass - milk (thyroid) - Man. The Compton Suppression System consists of an HPGe detector surrounded by an assembly of NaI(Tl) detectors, used to reduce the contribution of scattered gamma rays in the gamma spectrum that originate within the HPGe detector. A Compton suppression system consisting of N-type HPGe detector, 50% relative efficiency having low window thickness of about 0.3μm of Boron, and NaI(TI) detector as Compton shield was commissioned at ESL, Tarapur and various performance parameters were evaluated and documented. Being a reverse electrode HPGe system with low window thickness it can be used for the detection of low energy gamma lines from 3.0 keV to >10 MeV (Ortec). Hence, it is proposed to use the system for the determination of 129 I in environmental samples. The paper deals with the standardization of the system for efficiency and Minimum Detectable Activity (MDA) for various sample geometries in the detection of low level 129 I in various pathways of its exposure

  16. A Hybrid System for Acquisition of and Access to the Data from Foundry Technical Standards

    Directory of Open Access Journals (Sweden)

    A. Macioł

    2007-07-01

    Full Text Available The growing importance of automatized systems for interchange of commercial and technical information prompts searching for new forms of knowledge modelling. One of the possible solutions presented in this article is the use of relational databases for acquisition of information comprised in technical standards and of a rule-based reasoning system providing access to these bases. The study describes the structure of a database created under the assumption that concepts describing knowledge will be recorded in data collecting system and not in relational schema. The user is free to define by himself the structure of the knowledge without the need of introducing any changes to the relational schema. At the same time, the reasoning system enables very efficient knowledge searching. At present, tests are carried out on a software operating on a MS SQL Server. The project work and test performance of the system confirm that the adopted assumptions have been right and correct. The development of a new interface is anticipated using internet techniques. As a next step, the information resources collected in the system will be successively expanded using also information sources other than the technical standards.

  17. Comparison of vibration damping of standard and PDCPD housing of the electric power steering system

    Science.gov (United States)

    Płaczek, M.; Wróbel, A.; Baier, A.

    2017-08-01

    A comparison of two different types of electric power steering system housing is presented. The first considered type of the housing was a standard one that is made of an aluminium alloy. The second one is made of polydicyclopentadiene polymer (PDCPD) and was produced using the RIM technology. Considered elements were analysed in order to verify their properties of vibrations damping. This property is very important taking into account noise generated by elements of a car’s power steering system. During the carried out tests vibrations of analysed power steering housings were measured using Marco Fiber Composite (MFC) piezoelectric transducers. Results obtained for both considered power steering housings in case of the same parameters of vibrations excitations were measured and juxtaposed. Obtained results were analysed in order to verify if the housing made of PDCPD polymer has better properties of vibration damping than the standard one.

  18. A study of standard building blocks for the design of fault-tolerant distributed computer systems

    Science.gov (United States)

    Rennels, D. A.; Avizienis, A.; Ercegovac, M.

    1978-01-01

    This paper presents the results of a study that has established a standard set of four semiconductor VLSI building-block circuits. These circuits can be assembled with off-the-shelf microprocessors and semiconductor memory modules into fault-tolerant distributed computer configurations. The resulting multi-computer architecture uses self-checking computer modules backed up by a limited number of spares. A redundant bus system is employed for communication between computer modules.

  19. Calibration and consistency of results of an ionization-chamber secondary standard measuring system for activity

    International Nuclear Information System (INIS)

    Schrader, Heinrich

    2000-01-01

    Calibration in terms of activity of the ionization-chamber secondary standard measuring systems at the PTB is described. The measurement results of a Centronic IG12/A20, a Vinten ISOCAL IV and a radionuclide calibrator chamber for nuclear medicine applications are discussed, their energy-dependent efficiency curves established and the consistency checked using recently evaluated radionuclide decay data. Criteria for evaluating and transferring calibration factors (or efficiencies) are given

  20. C-Lock: An online system to standardize the estimation of agricultural carbon sequestration credits

    Energy Technology Data Exchange (ETDEWEB)

    Updegraff, Karen; Zimmerman, Patrick R.; Capehart, William J. [Institute of Atmospheric Sciences, South Dakota School of Mines and Technology, 501 E. St. Joseph Street, Rapid City, SD 57701-3995 (United States); Price, Maribeth [Department of Geology, South Dakota School of Mines and Technology, 501 E. St. Joseph Street, Rapid City, SD 57701-3995 (United States)

    2005-10-15

    C-Lock (patent pending) is a system that has been designed to produce standardized carbon emission reduction credits (CERCs) that minimize litigation risks to purchasers and maximize the potential value to agricultural producers. C-Lock provides a web-based user interface linking producer-supplied, verifiable, management data, a detailed regional-scale GIS, and a biogeochemical model (CENTURY). Output includes historical incremental carbon sequestration since 1990 and predictions of future sequestration, packaged to satisfy evolving regulatory standards. C-Lock incorporates a unique uncertainty analysis and a three-level verification system to produce certified CERCs for specific land parcels in a way that is reproducible, equitable, and regionally defensible. Using a South Dakota farm as an example, the authors show how, by avoiding reliance on field sampling, this system can minimize measurement and monitoring costs. It allows individual producers a high degree of control over contract design and marketing, thereby reducing transaction costs. The transparent, standardized, and auditable procedure produces CERCs of maximum value to those seeking emission offsets. (author)

  1. Analysis of Indonesian educational system standard with KSIM cross-impact method

    Science.gov (United States)

    Arridjal, F.; Aldila, D.; Bustamam, A.

    2017-07-01

    The Result of The Programme of International Student Assessment (PISA) on 2012 shows that Indonesia is on 64'th position from 65 countries in Mathematics Mean Score. The 2013 Learning Curve Mapping, Indonesia is included in the 10th category of countries with the lowest performance on cognitive skills aspect, i.e. 37'th position from 40 countries. Competency is built by 3 aspects, one of them is cognitive aspect. The low result of mapping on cognitive aspect, describe the low of graduate competences as an output of Indonesia National Education System (INES). INES adopting a concept Eight Educational System Standards (EESS), one of them is graduate competency standard which connected directly with Indonesia's students. This research aims is to model INES by using KSIM cross-impact. Linear regression models of EESS constructed using the accreditation national data of Senior High Schools in Indonesia. The results then interpreted as impact value on the construction of KSIM cross-impact INES. The construction is used to analyze the interaction of EESS and doing numerical simulation for possible public policy in the education sector, i.e. stimulate the growth of education staff standard, content, process and infrastructure. All simulations of public policy has been done with 2 methods i.e with a multiplier impact method and with constant intervention method. From numerical simulation result, it is shown that stimulate the growth standard of content in the construction KSIM cross-impact EESS is the best option for public policy to maximize the growth of graduate competency standard.

  2. Control Systems Security Center Comparison Study of Industrial Control System Standards against the Control Systems Protection Framework Cyber-Security Requirements

    Energy Technology Data Exchange (ETDEWEB)

    Robert P. Evans

    2005-09-01

    Cyber security standards, guidelines, and best practices for control systems are critical requirements that have been delineated and formally recognized by industry and government entities. Cyber security standards provide a common language within the industrial control system community, both national and international, to facilitate understanding of security awareness issues but, ultimately, they are intended to strengthen cyber security for control systems. This study and the preliminary findings outlined in this report are an initial attempt by the Control Systems Security Center (CSSC) Standard Awareness Team to better understand how existing and emerging industry standards, guidelines, and best practices address cyber security for industrial control systems. The Standard Awareness Team comprised subject matter experts in control systems and cyber security technologies and standards from several Department of Energy (DOE) National Laboratories, including Argonne National Laboratory, Idaho National Laboratory, Pacific Northwest National Laboratory, and Sandia National Laboratories. This study was conducted in two parts: a standard identification effort and a comparison analysis effort. During the standard identification effort, the Standard Awareness Team conducted a comprehensive open-source survey of existing control systems security standards, regulations, and guidelines in several of the critical infrastructure (CI) sectors, including the telecommunication, water, chemical, energy (electric power, petroleum and oil, natural gas), and transportation--rail sectors and sub-sectors. During the comparison analysis effort, the team compared the requirements contained in selected, identified, industry standards with the cyber security requirements in ''Cyber Security Protection Framework'', Version 0.9 (hereafter referred to as the ''Framework''). For each of the seven sector/sub-sectors listed above, one standard was

  3. Robust Road Condition Detection System Using In-Vehicle Standard Sensors.

    Science.gov (United States)

    Castillo Aguilar, Juan Jesús; Cabrera Carrillo, Juan Antonio; Guerra Fernández, Antonio Jesús; Carabias Acosta, Enrique

    2015-12-19

    The appearance of active safety systems, such as Anti-lock Braking System, Traction Control System, Stability Control System, etc., represents a major evolution in road safety. In the automotive sector, the term vehicle active safety systems refers to those whose goal is to help avoid a crash or to reduce the risk of having an accident. These systems safeguard us, being in continuous evolution and incorporating new capabilities continuously. In order for these systems and vehicles to work adequately, they need to know some fundamental information: the road condition on which the vehicle is circulating. This early road detection is intended to allow vehicle control systems to act faster and more suitably, thus obtaining a substantial advantage. In this work, we try to detect the road condition the vehicle is being driven on, using the standard sensors installed in commercial vehicles. Vehicle models were programmed in on-board systems to perform real-time estimations of the forces of contact between the wheel and road and the speed of the vehicle. Subsequently, a fuzzy logic block is used to obtain an index representing the road condition. Finally, an artificial neural network was used to provide the optimal slip for each surface. Simulations and experiments verified the proposed method.

  4. Robust Road Condition Detection System Using In-Vehicle Standard Sensors

    Directory of Open Access Journals (Sweden)

    Juan Jesús Castillo Aguilar

    2015-12-01

    Full Text Available The appearance of active safety systems, such as Anti-lock Braking System, Traction Control System, Stability Control System, etc., represents a major evolution in road safety. In the automotive sector, the term vehicle active safety systems refers to those whose goal is to help avoid a crash or to reduce the risk of having an accident. These systems safeguard us, being in continuous evolution and incorporating new capabilities continuously. In order for these systems and vehicles to work adequately, they need to know some fundamental information: the road condition on which the vehicle is circulating. This early road detection is intended to allow vehicle control systems to act faster and more suitably, thus obtaining a substantial advantage. In this work, we try to detect the road condition the vehicle is being driven on, using the standard sensors installed in commercial vehicles. Vehicle models were programmed in on-board systems to perform real-time estimations of the forces of contact between the wheel and road and the speed of the vehicle. Subsequently, a fuzzy logic block is used to obtain an index representing the road condition. Finally, an artificial neural network was used to provide the optimal slip for each surface. Simulations and experiments verified the proposed method.

  5. A Standard-Compliant Virtual Meeting System with Active Video Object Tracking

    Directory of Open Access Journals (Sweden)

    Chang Yao-Jen

    2002-01-01

    Full Text Available This paper presents an H.323 standard compliant virtual video conferencing system. The proposed system not only serves as a multipoint control unit (MCU for multipoint connection but also provides a gateway function between the H.323 LAN (local-area network and the H.324 WAN (wide-area network users. The proposed virtual video conferencing system provides user-friendly object compositing and manipulation features including 2D video object scaling, repositioning, rotation, and dynamic bit-allocation in a 3D virtual environment. A reliable, and accurate scheme based on background image mosaics is proposed for real-time extracting and tracking foreground video objects from the video captured with an active camera. Chroma-key insertion is used to facilitate video objects extraction and manipulation. We have implemented a prototype of the virtual conference system with an integrated graphical user interface to demonstrate the feasibility of the proposed methods.

  6. Rational designing of the internal water supply system in reconstructed residential buildings of mass standard series

    Directory of Open Access Journals (Sweden)

    Orlov Evgeny

    2018-01-01

    Full Text Available The issues of water supply system reconstruction in mass series buildings are reviewed with consideration of water- and resource saving. Principal points for location of plumbing cells in apartments, arrangement of water devices and wastewater receivers, selection of pipelines for reconstructed water line are described. Comparative analysis of design variants of inner water line before and following reconstruction are given. It was found that applying the developed system design approaches the head losses in the inner water supply line will be significantly decreased as well as the water mains length will be decreased with material and installation saving. Based on the data the conclusions on necessity to review standard arrangement solutions of water supply systems in the reconstructed buildings were made. Recommendations on water loss reduction in the system by installation of special water saving fittings on water devices and touchless faucets.

  7. An evaluation of adherence to society of pharmacists' standards care in pharmacy information systems in Iran.

    Science.gov (United States)

    Saghaeiannejad-Isfahani, Sakineh; Sharifi-Rad, Javad; Raeisi, Ahmadreza; Ehteshami, Asghar; Mirzaeian, Razieh

    2015-01-01

    Pharmacy information system (PIS) is a complex computerized system used for collecting, storing, and managing the medication therapy data in the course of patients' care. The purpose of this study was to evaluate the level of adherence to the standards established by the societies of pharmacists in the PISs employed in the hospitals in Isfahan, Iran. The present study was an applied, descriptive-analytical study conducted on the PISs of 19 teaching, private and social insurance hospitals in Isfahan in 2011. Study population consisted of the PISs available in the hospitals under study. Study sample was the same as the study population. The data collection instrument was a self-developed checklist based on the guidelines of the American Society of Health-System Pharmacists and Pharmaceutical Society of Australia, whose validity was assessed and confirmed by expert professors' views. Having been collected by observation and interview methods, data were analyzed by SPSS 18 software using Mann-Whitney statistical test. The findings of the study revealed that the highest rank in adherence to the standards of societies of pharmacists was obtained by social services hospitals (32.75%), while the private hospitals obtained the lowest rank (23.32%). Based on the findings, in the PISs in the hospitals under study, some standards of the society of pharmacists were ignored. Hence, prior to designing and implementing PIS, a needs analysis is required to increase its users' motivation to identify the system potentialities and to allow the system development in compliance with the world technology advancement.

  8. Proposal and Evaluation of Subordinate Standard Solar Irradiance Spectra for Applications in Solar Energy Systems

    Energy Technology Data Exchange (ETDEWEB)

    Habte, Aron M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jessen, Wilko [German Aerospace Center (DLR); Wilbert, Stefan [German Aerospace Center (DLR); Gueymard, Christian A. [Solar Consulting Services; Polo, Jesus [CIEMAT; Bian, Zeqiang [China Meteorological Administration; Driesse, Anton [Photovoltaic Performance Labs; Marzo, Aitor [University of Antofagasta; Armstrong, Peter [Masdar Institute of Science & Technology; Vignola, Frank [University of Oregon; Ramirez, Lourdes [CIEMAT

    2018-04-01

    Reference solar irradiance spectra are needed to specify key parameters of solar technologies such as photovoltaic cell efficiency, in a comparable way. The IEC 60904-3 and ASTM G173 standards present such spectra for Direct Normal Irradiance (DNI) and Global Tilted Irradiance (GTI) on a 37 degrees tilted sun-facing surface for one set of clear-sky conditions with an air mass of 1.5 and low aerosol content. The IEC/G173 standard spectra are the widely accepted references for these purposes. Hence, the authors support the future replacement of the outdated ISO 9845 spectra with the IEC spectra within the ongoing update of this ISO standard. The use of a single reference spectrum per component of irradiance is important for clarity when comparing and rating solar devices such as PV cells. However, at some locations the average spectra can differ strongly from those defined in the IEC/G173 standards due to widely different atmospheric conditions and collector tilt angles. Therefore, additional subordinate standard spectra for other atmospheric conditions and tilt angles are of interest for a rough comparison of product performance under representative field conditions, in addition to using the main standard spectrum for product certification under standard test conditions. This simplifies the product selection for solar power systems when a fully-detailed performance analysis is not feasible (e.g. small installations). Also, the effort for a detailed yield analyses can be reduced by decreasing the number of initial product options. After appropriate testing, this contribution suggests a number of additional spectra related to eight sets of atmospheric conditions and tilt angles that are currently considered within ASTM and ISO working groups. The additional spectra, called subordinate standard spectra, are motivated by significant spectral mismatches compared to the IEC/G173 spectra (up to 6.5%, for PV at 37 degrees tilt and 10-15% for CPV). These mismatches

  9. High security chaotic multiple access scheme for visible light communication systems with advanced encryption standard interleaving

    Science.gov (United States)

    Qiu, Junchao; Zhang, Lin; Li, Diyang; Liu, Xingcheng

    2016-06-01

    Chaotic sequences can be applied to realize multiple user access and improve the system security for a visible light communication (VLC) system. However, since the map patterns of chaotic sequences are usually well known, eavesdroppers can possibly derive the key parameters of chaotic sequences and subsequently retrieve the information. We design an advanced encryption standard (AES) interleaving aided multiple user access scheme to enhance the security of a chaotic code division multiple access-based visible light communication (C-CDMA-VLC) system. We propose to spread the information with chaotic sequences, and then the spread information is interleaved by an AES algorithm and transmitted over VLC channels. Since the computation complexity of performing inverse operations to deinterleave the information is high, the eavesdroppers in a high speed VLC system cannot retrieve the information in real time; thus, the system security will be enhanced. Moreover, we build a mathematical model for the AES-aided VLC system and derive the theoretical information leakage to analyze the system security. The simulations are performed over VLC channels, and the results demonstrate the effectiveness and high security of our presented AES interleaving aided chaotic CDMA-VLC system.

  10. American National Standard: design requirements for light-water-reactor fuel-handling systems

    International Nuclear Information System (INIS)

    Anon.

    1980-01-01

    This standard defines the required functions of fuel handling systems at light water reactor nuclear power plants. It provides minimum design requirements for equipment and tools for safe handling of nuclear fuel and control components at light water reactor nuclear power plants. The fuel handling system covered by this standard consists of handling equipment used for receiving and inspecting fuel containing new and recycled uranium; transporting on-site and loading fuel containing new and recycled uranium or irradiated fuel and control components in the reactor; removing from the reactor, transporting to storage, and inspecting irradiated fuel and loading casks for shipment of irradiated fuel from the site. It includes basic requirements and configuration for design, fabrication, maintenance, and operation. The basis of this standard is that the intended function of the equipment will be performed in an efficient and economical manner that assures protection to plant personnel and to the public, and that any radiation exposurers are maintained as low as reasonably achievable

  11. Detection of proximal caries with high-resolution and standard resolution digital radiographic systems.

    Science.gov (United States)

    Berkhout, W E R; Verheij, J G C; Syriopoulos, K; Li, G; Sanderink, G C H; van der Stelt, P F

    2007-05-01

    The aim of this study was to: (1) compare the diagnostic accuracy of the high-resolution and standard resolution settings of four digital imaging systems for caries diagnosis and (2) compare the effect on the diagnostic accuracy of reducing the high-resolution image sizes to the standard resolution dimensions, and vice versa. 90 extracted human premolars were mounted in groups of 5 in plaster blocks, containing 4 test teeth and 1 non-test tooth. Two blocks at a time were placed in a jig to simulate a bitewing radiograph. Radiographs were taken using four digital systems (Planmeca Dixi 2; Gendex Visualix HDI; Dürr Vistascan; Digora Optime), each at two resolution settings. Next, the teeth were sectioned and a total of 65 surfaces were incorporated in the study. Additionally, the bicubic interpolation method was applied to reduce the high-resolution original images and to enlarge the standard resolution images. The original, reduced and enlarged images were randomly shown to five observers in two random sessions. The observers were asked to assess caries depth on a 4-point scale. The observers' scores were compared with the results from a histological examination. Data were analysed using the statistical theory for multivariate discrete data. Cohen's kappa was used to determine the agreement with the gold standard. None of the comparisons between the spatial resolution settings, or the comparisons between increased or reduced image size and the original image sizes, showed significant differences in the probability of caries detection (chi2=26.59, df=26, P approximately 0.50). The four digital systems used in this study differ significantly in the probability of caries detection (chi2=41.55, df=24, PCaries diagnosis does not improve when using high-resolution settings compared with the standard settings. The use of bicubic convolution interpolation for zooming has no detectable effect on caries diagnosis and therefore is recommended to use when enlarging or reducing

  12. Standard guide for mechanical drive systems for remote operation in hot cell facilities

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 Intent: 1.1.1 The intent of this standard is to provide general guidelines for the design, selection, quality assurance, installation, operation, and maintenance of mechanical drive systems used in remote hot cell environments. The term mechanical drive systems used herein, encompasses all individual components used for imparting motion to equipment systems, subsystems, assemblies, and other components. It also includes complete positioning systems and individual units that provide motive power and any position indicators necessary to monitor the motion. 1.2 Applicability: 1.2.1 This standard is intended to be applicable to equipment used under one or more of the following conditions: 1.2.1.1 The materials handled or processed constitute a significant radiation hazard to man or to the environment. 1.2.1.2 The equipment will generally be used over a long-term life cycle (for example, in excess of two years), but equipment intended for use over a shorter life cycle is not excluded. 1.2.1.3 The ...

  13. Timely diagnosis of dairy calf respiratory disease using a standardized scoring system.

    Science.gov (United States)

    McGuirk, Sheila M; Peek, Simon F

    2014-12-01

    Respiratory disease of young dairy calves is a significant cause of morbidity, mortality, economic loss, and animal welfare concern but there is no gold standard diagnostic test for antemortem diagnosis. Clinical signs typically used to make a diagnosis of respiratory disease of calves are fever, cough, ocular or nasal discharge, abnormal breathing, and auscultation of abnormal lung sounds. Unfortunately, routine screening of calves for respiratory disease on the farm is rarely performed and until more comprehensive, practical and affordable respiratory disease-screening tools such as accelerometers, pedometers, appetite monitors, feed consumption detection systems, remote temperature recording devices, radiant heat detectors, electronic stethoscopes, and thoracic ultrasound are validated, timely diagnosis of respiratory disease can be facilitated using a standardized scoring system. We have developed a scoring system that attributes severity scores to each of four clinical parameters; rectal temperature, cough, nasal discharge, ocular discharge or ear position. A total respiratory score of five points or higher (provided that at least two abnormal parameters are observed) can be used to distinguish affected from unaffected calves. This can be applied as a screening tool twice-weekly to identify pre-weaned calves with respiratory disease thereby facilitating early detection. Coupled with effective treatment protocols, this scoring system will reduce post-weaning pneumonia, chronic pneumonia, and otitis media.

  14. Towards a Standardized e-Assessment System: Motivations, Challenges and First Findings

    Directory of Open Access Journals (Sweden)

    Denis Helic

    2009-10-01

    Full Text Available “Global Learning” with shared learning contents, resources, activities and goals is one of the contributions of Globalization. With the capability to use new Information and Communication Technologies (ICT it is a bit easier to have a technology based learning systems that enable learners to share the learning resources and possibilities. As a result many Learning Management Systems (LMS were developed with divers of platforms and approaches. Consequently, sharing learning resources and components has become a major challenge. E-assessment as a primary activity of any LMS is facing the same challenges and problems. In order to stand on this challenge people in the field of technology enhanced learning have recommended that LMS should conform to specific standards. This paper discuses this challenge, the consequences and limitations of standards in the modern learning settings. Moreover, it shows a service oriented framework for assessment which aims to make the e-assessment systems flexible and also to initiate the term of “Global Learning Assessment” with the possibility of sharing the e-assessment system components.

  15. Photovoltaic Device Performance Evaluation Using an Open-Hardware System and Standard Calibrated Laboratory Instruments

    Directory of Open Access Journals (Sweden)

    Jesús Montes-Romero

    2017-11-01

    Full Text Available This article describes a complete characterization system for photovoltaic devices designed to acquire the current-voltage curve and to process the obtained data. The proposed system can be replicated for educational or research purposes without having wide knowledge about electronic engineering. Using standard calibrated instrumentation, commonly available in any laboratory, the accuracy of measurements is ensured. A capacitive load is used to bias the device due to its versatility and simplicity. The system includes a common part and an interchangeable part that must be designed depending on the electrical characteristics of each PV device. Control software, developed in LabVIEW, controls the equipment, performs automatic campaigns of measurements, and performs additional calculations in real time. These include different procedures to extrapolate the measurements to standard test conditions and methods to obtain the intrinsic parameters of the single diode model. A deep analysis of the uncertainty of measurement is also provided. Finally, the proposed system is validated by comparing the results obtained from some commercial photovoltaic modules to the measurements given by an independently accredited laboratory.

  16. A standards-based clinical information system for HIV/AIDS.

    Science.gov (United States)

    Stitt, F W

    1995-01-01

    To create a clinical data repository to interface the Veteran's Administration (VA) Decentralized Hospital Computer Program (DHCP) and a departmental clinical information system for the management of HIV patients. This system supports record-keeping, decision-making, reporting, and analysis. The database development was designed to overcome two impediments to successful implementations of clinical databases: (i) lack of a standard reference data model, and; (ii) lack of a universal standard for medical concept representation. Health Level Seven (HL7) is a standard protocol that specifies the implementation of interfaces between two computer applications (sender and receiver) from different vendors or sources of electronic data exchange in the health care environment. This eliminates or substantially reduces the custom interface programming and program maintenance that would otherwise be required. HL7 defines the data to be exchanged, the timing of the interchange, and the communication of errors to the application. The formats are generic in nature and must be configured to meet the needs of the two applications involved. The standard conceptually operates at the seventh level of the ISO model for Open Systems Interconnection (OSI). The OSI simply defines the data elements that are exchanged as abstract messages, and does not prescribe the exact bit stream of the messages that flow over the network. Lower level network software developed according to the OSI model may be used to encode and decode the actual bit stream. The OSI protocols are not universally implemented and, therefore, a set of encoding rules for defining the exact representation of a message must be specified. The VA has created an HL7 module to assist DHCP applications in exchanging health care information with other applications using the HL7 protocol. The DHCP HL7 module consists of a set of utility routines and files that provide a generic interface to the HL7 protocol for all DHCP applications

  17. System Energy Assessment (SEA, Defining a Standard Measure of EROI for Energy Businesses as Whole Systems

    Directory of Open Access Journals (Sweden)

    Jay Zarnikau

    2011-10-01

    Full Text Available A more objective method for measuring the energy needs of businesses, System Energy Assessment (SEA, measures the combined impacts of material supply chains and service supply chains, to assess businesses as whole self-managing net-energy systems. The method is demonstrated using a model Wind Farm, and defines a physical measure of their energy productivity for society (EROI-S, a ratio of total energy delivered to total energy expended. Energy use records for technology and proxy measures for clearly understood but not individually recorded energy uses for services are combined for a whole system estimate of consumption required for production. Current methods count only energy needs for technology. Business services outsource their own energy needs to operate, leaving no traceable record. That uncounted business energy demand is often 80% of the total, an amount of “dark energy” hidden from view, discovered by finding the average energy estimated needs for businesses far below the world average energy consumed per dollar of GDP. Presently for lack of information the energy needs of business services are counted to be “0”. Our default assumption is to treat them as “average”. The result is a hard measure of total business demand for energy services, a “Scope 4” energy use or GHG impact assessment. Counting recorded energy uses and discounting unrecorded ones misrepresents labor intensive work as highly energy efficient. The result confirms a similar finding by Hall et al. in 1981 [1]. We use exhaustive search for what a business needs to operate as a whole, tracing internal business relationships rather than energy data, to locate its natural physical boundary as a working unit, and so define a business as a physical rather than statistical subject of scientific study. See also online resource materials and notes [2].

  18. Standards in process: Foundation and profiles of ISDN (Integrated Services Digital Network) and OSI (Open Systems Interconnection) studies

    Science.gov (United States)

    Cerni, D. M.

    1984-12-01

    Telecommunication and computer technologies are merging, stimulating such global communication projects as the Integrated Services Digital Network (ISDN) and the Open Systems Interconnection (OSI) Reference Model. The systems of standards needed to ensure worldwide success of these projects are being developed. These efforts, of unprecedented complexity, are demanding an increase in knowledgeable dedicated standards workers. This report offers background material on the meaning, significance, and changing nature of standards and their development, both in the United States and internationally.

  19. On the measurement of the neutrino velocity applying the standard time of the Global Positioning System

    Science.gov (United States)

    Skeivalas, J.; Parseliunas, E.

    2013-01-01

    The measurement of the neutrino velocity applying the standard time of the Global Positioning System (GPS) is presented in the paper. The practical data were taken from the OPERA experiment, in which neutrino emission from the CERN LHC accelerator to Gran Sasso detector was investigated. The distance between accelerator and detector is about 730 km. The time interval was measured by benchmark clocks, which were calibrated by the standard GPS time signals received from GPS satellites. The calculation of the accuracy of the GPS time signals with respect to changes of the signals' frequencies due to the Doppler effect is presented. It is shown that a maximum error of about 200 ns could occur when GPS time signals are applied for the calibration of the clocks for the neutrino velocity measurements.

  20. A Standard Mutual Authentication Protocol for Cloud Computing Based Health Care System.

    Science.gov (United States)

    Mohit, Prerna; Amin, Ruhul; Karati, Arijit; Biswas, G P; Khan, Muhammad Khurram

    2017-04-01

    Telecare Medical Information System (TMIS) supports a standard platform to the patient for getting necessary medical treatment from the doctor(s) via Internet communication. Security protection is important for medical records (data) of the patients because of very sensitive information. Besides, patient anonymity is another most important property, which must be protected. Most recently, Chiou et al. suggested an authentication protocol for TMIS by utilizing the concept of cloud environment. They claimed that their protocol is patient anonymous and well security protected. We reviewed their protocol and found that it is completely insecure against patient anonymity. Further, the same protocol is not protected against mobile device stolen attack. In order to improve security level and complexity, we design a light weight authentication protocol for the same environment. Our security analysis ensures resilience of all possible security attacks. The performance of our protocol is relatively standard in comparison with the related previous research.

  1. Improvement of security techniques and protection of biometric data in biometric systems: Presentation of International Standard ISO 24745

    OpenAIRE

    Milinković, Milorad

    2017-01-01

    This paper presents the International Standard ISO 24745 as a potential security tool for biometric information protection, more precisely as a tool for privacy protection in biometric systems. This is one of the latest internationally accepted standards that address the security issues of biometric systems.

  2. Condition Assessment Survey (CAS) Program. Deficiency standards and inspections methods manual: Volume 11, 0.11 Specialty systems

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    General information is presented for asset determinant factor/CAS repair codes/CAS cost factors; guide sheet tool & material listing; testing methods; inspection frequency; standard system design life tables; system work breakdown structure; and general system/material data. Deficiency standards and inspection methods are presented for canopies; loading dock systems; tanks; domes (bulk storage, metal framing); louvers & vents; access floors; integrated ceilings; and mezzanine structures.

  3. The Role of Planetary Data System Archive Standards in International Planetary Data Archives

    Science.gov (United States)

    Guinness, Edward; Slavney, Susan; Beebe, Reta; Crichton, Daniel

    A major objective of NASA's Planetary Data System (PDS) is to efficiently archive and make accessible digital data produced by NASA's planetary missions, research programs, and data analysis programs. The PDS is comprised of a federation of groups known as nodes, with each node focused on archiving and managing planetary data from a given science discipline. PDS nodes include Atmospheres, Geosciences, Small Bodies (asteroids, comets, and dust), Rings, Planetary Plasma Interactions, and Imaging. There are also support nodes for engineering, radio science, and ancillary data, such as geometry information. The PDS archives include space-borne, ground-based, and laboratory experiment data from several decades of NASA exploration of comets, asteroids, moons, and planets. PDS archives are peer-reviewed, welldocumented, and accessible online via web sites, catalogs, and other user-interfaces that provide search and retrieval capabilities. Current holdings within the PDS online repositories total approximately 50 TB of data. Over the next few years, the PDS is planning for a rapid expansion in the volume of data being delivered to its archives. The archive standards developed by the PDS are crucial elements for producing planetary data archives that are consistent across missions and planetary science disciplines and that yield archives that are useable by the planetary research community. These standards encompass the full range of archiving needs. They include standards for the format of data products and the metadata needed to detail how observations were made. They also specify how data products and ancillary information such as documentation, calibration, and geometric information are packaged into data sets. The PDS standards are documented in its Planetary Science Data Dictionary and in its Standards Reference Document and Archive Preparation Guide. The PDS standards are being used to design and implement data archives for current and future NASA planetary missions

  4. Natural language processing systems for capturing and standardizing unstructured clinical information: A systematic review.

    Science.gov (United States)

    Kreimeyer, Kory; Foster, Matthew; Pandey, Abhishek; Arya, Nina; Halford, Gwendolyn; Jones, Sandra F; Forshee, Richard; Walderhaug, Mark; Botsis, Taxiarchis

    2017-09-01

    We followed a systematic approach based on the Preferred Reporting Items for Systematic Reviews and Meta-Analyses to identify existing clinical natural language processing (NLP) systems that generate structured information from unstructured free text. Seven literature databases were searched with a query combining the concepts of natural language processing and structured data capture. Two reviewers screened all records for relevance during two screening phases, and information about clinical NLP systems was collected from the final set of papers. A total of 7149 records (after removing duplicates) were retrieved and screened, and 86 were determined to fit the review criteria. These papers contained information about 71 different clinical NLP systems, which were then analyzed. The NLP systems address a wide variety of important clinical and research tasks. Certain tasks are well addressed by the existing systems, while others remain as open challenges that only a small number of systems attempt, such as extraction of temporal information or normalization of concepts to standard terminologies. This review has identified many NLP systems capable of processing clinical free text and generating structured output, and the information collected and evaluated here will be important for prioritizing development of new approaches for clinical NLP. Copyright © 2017 Elsevier Inc. All rights reserved.

  5. Development of alarm cause tracking system for Korea standard nuclear power plant

    International Nuclear Information System (INIS)

    Lee, Jung Woon; Kim, Jung Taek; Park, Jae Chang; Lee, Hyun Chul; Park, Joong Pal

    2004-05-01

    The proposed system, the ACTS(Alarm Cause Tracking System), in the 1st and 2nd development period(2001. 7 ∼ 2003. 6), tracks and displays the causes of alarms on-line from computerized logic diagrams. And the system highlights the specific procedures related the causes in the procedure of the alarm. In this period(2003. 7 ∼ 2004. 4), we developed the ACTS for Korea standard nuclear power plant. Also, we computerized control logic diagrams and alarm procedures for the ACTS. A long-term target is to apply the ACTS at the real power plant, and a short-term target is to connect the ACTS with the ITF(Intergrated Test Facility) in KAERI site to develop other applications

  6. An optimal PID controller via LQR for standard second order plus time delay systems.

    Science.gov (United States)

    Srivastava, Saurabh; Misra, Anuraag; Thakur, S K; Pandit, V S

    2016-01-01

    An improved tuning methodology of PID controller for standard second order plus time delay systems (SOPTD) is developed using the approach of Linear Quadratic Regulator (LQR) and pole placement technique to obtain the desired performance measures. The pole placement method together with LQR is ingeniously used for SOPTD systems where the time delay part is handled in the controller output equation instead of characteristic equation. The effectiveness of the proposed methodology has been demonstrated via simulation of stable open loop oscillatory, over damped, critical damped and unstable open loop systems. Results show improved closed loop time response over the existing LQR based PI/PID tuning methods with less control effort. The effect of non-dominant pole on the stability and robustness of the controller has also been discussed. Copyright © 2015 ISA. Published by Elsevier Ltd. All rights reserved.

  7. Testing of x-ray microtomography systems using a traceable geometrical standard

    International Nuclear Information System (INIS)

    Carmignato, S; Dreossi, D; Mancini, L; Tromba, G; Marinello, F; Savio, E

    2009-01-01

    X-ray computed microtomography is an interesting imaging technique for many applications, and is also very promising in the field of coordinate metrology at the micro scale. The main advantage with respect to traditional tactile-probing or optical coordinate measurement systems is that x-ray tomography can acquire dimensional and geometrical data for both inner and outer surfaces, without accessibility restrictions. However, there are no accepted test procedures available so far and measurement uncertainty is unknown in many cases, due to complex and numerous error sources. The paper presents the first results of a test procedure implemented for determining the errors of indication for length measurements of x-ray microtomography systems, using a new reference standard featuring a regular array of inner and outer cylindrical shapes. The developed test method allows the determination of specific characteristics of x-ray microtomography systems and can be used for the correction of systematic errors

  8. Coincidence system for standardization of radionuclides using a 4 pi plastic scintillator detector

    CERN Document Server

    Baccarelli, A M; Koskinas, M F

    2003-01-01

    A coincidence system using a plastic scintillator detector in 4 pi geometry has been developed and applied for the standardization of radionuclides. The scintillator shape and dimensions have been optimized for maximum charge particle detection efficiency, while keeping background low and a nearly constant gamma-ray efficiency for different points from the radioactive source. The gamma-ray events were measured with a NaI(Tl) scintillation counter. The electronic system for processing pulses consisted of logic gates and delay modules feeding a time-to-amplitude converter with output to a multichannel analyzer. The alpha detection efficiency measured with sup 2 sup 4 sup 1 Am was around 95% and the beta detection efficiency for sup 6 sup 0 Co was around 67%. Activity measurements of sup 2 sup 4 sup 1 Am and sup 6 sup 0 Co were performed and the results showed good agreement when compared with a conventional coincidence system employing a 4 pi proportional counter.

  9. Correlation study among the International Atomic Energy Agency standards and market standards on management system applicable to a UF6 conversion plant operation

    International Nuclear Information System (INIS)

    Oliveira, Dirceu Paulo de

    2008-01-01

    The Agency - International Atomic Energy Agency (IAEA), following the market trend of the management system integration, has decided to revise the quality assurance standards - IAEA 50-C/SG-Q publishing, in 2006, the standard on Management System (MS). IAEA GS-R-3 and its IAEA GS-G-3.1 guide. Also, the IAEA is about to publish a supplementary guide - IAEA DS349, which consider the integration of several functions involved in management of nuclear facilities, such as: safety, health, environmental and quality, ensuring that nuclear safety is not compromised. Conversion plants of 'Yellowcake' in UF 6 use and process radioactive materials, as well as other substances normally found in the chemical conventional industry, inserting themselves in the organization profile that require a high pattern of definition, implementation and continuous improvement of their MS and, therefore, should consider an approach of management integrated system (MIS). Taking a UF 6 conversion plant as focus, the correlation was performed among the Agency MS standards and those of the market - ISO 9001, ISO 14001 and OHSAS 18001, as well as with the Agency drafts standards on safety (DS316 and DS344), concluding that, in structuring an MIS, in compliance with the Agency MS standards, except for some adjustments, the ISO 9001, ISO 14001, and OHSAS 18001 are going to be met. On the other hand, the structuring of MIS should identify other requirements on safety, health and environmental, which also consider the conventional chemical and industrial characteristics that are out of the scope (ionizing radiation) of the safety standards of the Agency. The research proposes a documental procedure for a MIS applicable to this plant, providing elements for rationalization and contents of the identified documentation, for the promotion of the integration of the considered MS functions. (author)

  10. Validation of a motor activity system by a robotically controlled vehicle and using standard reference compounds.

    Science.gov (United States)

    Patterson, John P; Markgraf, Carrie G; Cirino, Maria; Bass, Alan S

    2005-01-01

    A series of experiments were undertaken to evaluate the accuracy, precision, specificity, and sensitivity of an automated, infrared photo beam-based open field motor activity system, the MotorMonitor v. 4.01, Hamilton-Kinder, LLC, for use in a good laboratory practices (GLP) Safety Pharmacology laboratory. This evaluation consisted of two phases: (1) system validation, employing known inputs using the EM-100 Controller Photo Beam Validation System, a robotically controlled vehicle representing a rodent and (2) biologic validation, employing groups of rats treated with the standard pharmacologic agents diazepam or D-amphetamine. The MotorMonitor's parameters that described the open-field activity of a subject were: basic movements, total distance, fine movements, x/y horizontal ambulations, rearing, and total rest time. These measurements were evaluated over a number of zones within each enclosure. System validation with the EM-100 Controller Photo Beam Validation System showed that all the parameters accurately and precisely measured what they were intended to measure, with the exception of fine movements and x/y ambulations. Biologic validation using the central nervous system depressant diazepam at 1, 2, or 5 mg/kg, i.p. produced the expected dose-dependent reduction in rat motor activity. In contrast, the central nervous system stimulant D-amphetamine produced the expected increases in rat motor activity at 0.1 and 1 mg/kg, i.p, demonstrating the specificity and sensitivity of the system. Taken together, these studies of the accuracy, precision, specificity, and sensitivity show the importance of both system and biologic validation in the evaluation of an automated open field motor activity system for use in a GLP compliant laboratory.

  11. Standardization of Experimental Design for Crop Cultivation in Life Support Systems for Space Exploration

    Science.gov (United States)

    Wolff, Silje Aase; Coelho, Liz Helena; Karoliussen, Irene; Kittang Jost, Ann-Iren

    Due to logistical challenges, long-term human space exploration missions require a life support system capable of regenerating all the essentials for survival. Higher plants can be utilized to provide a continuous supply of fresh food, fresh air, and clean water for humans. The extensive work performed have shown that higher plants are able to adapt to space conditions in low Earth orbit, at least from one generation from seed to seed. Since the hardware has turned out to be of great importance for the results in microgravity research, full environmental monitoring and control must be the standard for future experiments. Selecting a few model plants, including crop plants for life support, would further increase the comparability between studies. The European Space Agency (ESA) has developed the Micro-Ecological Life Support System Alternative (MELiSSA) program to develop a closed regenerative life support system, based on micro-organisms and higher plants, with continuous recycling of resources. In the present study, recommended standardization of the experimental design for future scientific work assessing the effects of graded gravity on plant metabolism will be presented. This includes the environmental conditions required for cultivation of the selected MEliSSA species (wheat, bread wheat, soybean and potato), as well as guidelines for sowing, plant handling and analysis. Keywords: microgravity; magnetic field; radiation; MELiSSA; Moon; Mars.

  12. A theoretical study on the relative standard deviation of TLD systems

    International Nuclear Information System (INIS)

    Zarand, P.; Polgar, I.

    1983-01-01

    The relative standard deviation of a thermoluminescence dosimetry system is discussed. According to the present results if dosimeters are irradiated with a known dose, then the relative standard deviation of the reading at a given dose value may be described as sigmasub(R)/R = (A 2 /D 2 + B 2 + C/D)sup(0.5) in both the photon counting and in the more often used charge integrating method. The variation of the background dark current + zero dose reading is dependent on the reader properties, on the accuracy of the irradiation of dosemeters, etc. All steps of the TL measurements are of statistical nature; the whole system being a chain of statistical multiplicative devices. This formula is therefore derived by using the momentum generating functions of the appropriate distributions of the various physical processes involved in TL dosimetry. The effects of photomultiplication and the background correction are also discussed by this method. The different behaviour of various TLD systems in the low-dose range is explained by the model given by the authors. (orig.)

  13. Safety Standard for Hydrogen and Hydrogen Systems: Guidelines for Hydrogen System Design, Materials Selection, Operations, Storage and Transportation. Revision

    Science.gov (United States)

    1997-01-01

    The NASA Safety Standard, which establishes a uniform process for hydrogen system design, materials selection, operation, storage, and transportation, is presented. The guidelines include suggestions for safely storing, handling, and using hydrogen in gaseous (GH2), liquid (LH2), or slush (SLH2) form whether used as a propellant or non-propellant. The handbook contains 9 chapters detailing properties and hazards, facility design, design of components, materials compatibility, detection, and transportation. Chapter 10 serves as a reference and the appendices contained therein include: assessment examples; scaling laws, explosions, blast effects, and fragmentation; codes, standards, and NASA directives; and relief devices along with a list of tables and figures, abbreviations, a glossary and an index for ease of use. The intent of the handbook is to provide enough information that it can be used alone, but at the same time, reference data sources that can provide much more detail if required.

  14. Standardized System of Nuclear Safety Information for the Promotion of Transparency and Openness

    International Nuclear Information System (INIS)

    Lee, Gihyung; Kim, Sanghyun; Lee, Gyehwi; Yoon, Yeonhwa; Song, Song Hyerim; Jeong, Jina; Byun, Jaehyung; Seo, Jonghwan

    2013-01-01

    There has been an increasing emphasis on the need for increased disclosure of information through the home page of the Korea Institute of Nuclear Safety (KINS), responsible for nuclear safety regulations, and the Nuclear Safety Information Center (NSIC) to enhance public understanding of nuclear safety. However, due to the dazzled structure of the existing KINS and NSIC home pages, improvements in accessibility and convenience are necessary. At the same time, content standardization is required to increase operational efficiency and provide coherent information. In this study, the Delphi method was used to select the major contents to make available on the home page as well as the main user base definition for the home page layout development. Also, internal and external expert groups were created to conduct AHP (Analytic Hierarchy Process) analysis and develop the comparative analysis items for the U. S. Nuclear Regulatory Commission(NRC)/KINS/NSIC home pages. Afterwards, problems and points of improvements for the home page system, design, and profile were derived using heuristic analysis. The implications arising from the Delphi analysis results were applied to the home page layout. In the nuclear safety information standardized system construction process, the comparative analysis conducted using the AHP and heuristic analyses of the NRC home page resulted in deriving improvements for the Guidance, Organization, and Trustworthy items of the KINS/NSIC home page. Furthermore, through the Delphi analysis, a clear purpose and core values were set for the KINS web site, and the needs of the main user base were identified. By developing the home page layout, user interest and utility were raised to improve the organization method and layout. Through this study, KINS was able to construct a nuclear safety information standardized system and increase transparency and openness by providing feature enhancements in information provision as well as user accessibility and

  15. Optimum Power Distance Clustering for the EPC Class-1 Gen2 Standard in RFID Systems

    OpenAIRE

    Leonardo Sanchez; Victor Ramos

    2015-01-01

    Tag collision is one of the main issues impacting the performance of radio-frequency identification (RFID) systems. Several research efforts have been done in order to solve such problem. Current RFID standards, such as EPCGen2 and ISO-18000-7, adopt ALOHA-based protocols as the basis to solve collisions. In recent years, there has been a trend on designing schemes that split the interrogation zone into smaller regions with the aim of improving the system’s performance. In this paper, we eval...

  16. Reliability study: digital engineered safety feature actuation system of Korean Standard Nuclear Power Plant

    International Nuclear Information System (INIS)

    Sudarno; Kang, H. G.; Jang, S. C.; Eom, H. S.; Ha, J. J.

    2003-04-01

    The usage of digital Instrumentation and Control (I and C) in a nuclear power plant becomes more extensive, including safety related systems. The PSA application of these new designs are very important in order to evaluate their reliability. In particular, Korean Standard Nuclear Power Plants (KSNPPs), typically Ulchin 5 and 6 (UCN 5 and 6) reactor units, adopted the digital safety-critical systems such as Digital Plant Protection System (DPPS) and Digital Engineered Safety Feature Actuation System (DESFAS). In this research, we developed fault tree models for assessing the unavailability of the DESFAS functions. We also performed an analysis of the quantification results. The unavailability results of different DESFAS functions showed that their values are comprised from 5.461E-5 to 3.14E-4. The system unavailability of DESFAS AFAS-1 is estimated as 5.461E-5, which is about 27% less than that of analog system if we consider the difference of human failure probability estimation between both analyses. The results of this study could be utilized in risk-effect analysis of KSNPP. We expect that the safety analysis result will contribute to design feedback

  17. A direct comparison of a 10 V Josephson voltage standard between a refrigerator-based multi-chip programmable system and a conventional system

    Energy Technology Data Exchange (ETDEWEB)

    Yamada, Takahiro; Yamamori, Hirotake; Sasaki, Hitoshi; Shoji, Akira [Nanoelectronics Research Institute/National Institute of Advanced Industrial Science and Technology, Tsukuba Central 2, 1-1-1 Umezono, Tsukuba 305-8568 (Japan); Urano, Chiharu; Nishinaka, Hidefumi; Murayama, Yasushi; Iwasa, Akio; Nakamura, Yasuhiro, E-mail: yamada-takahiro@aist.go.j [National Metrology Institute of Japan/National Institute of Advanced Industrial Science and Technology, Tsukuba Central 3, 1-1-1 Umezono, Tsukuba 305-8563 (Japan)

    2009-09-15

    A multi-chip 10 V programmable Josephson voltage standard (PJVS) system was demonstrated using a closed-cycle refrigerator. We precisely measured the PJVS by a direct comparison measurement with a conventional Josephson voltage standard. The result agreed within a combined standard uncertainty of 3.9 x 10{sup -10} at 10 V.

  18. Comparison of Standard Wind Turbine Models with Vendor Models for Power System Stability Analysis: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Honrubia-Escribano, A.; Gomez Lazaro, E.; Jimenez-Buendia, F.; Muljadi, Eduard

    2016-11-01

    The International Electrotechnical Commission Standard 61400-27-1 was published in February 2015. This standard deals with the development of generic terms and parameters to specify the electrical characteristics of wind turbines. Generic models of very complex technological systems, such as wind turbines, are thus defined based on the four common configurations available in the market. Due to its recent publication, the comparison of the response of generic models with specific vendor models plays a key role in ensuring the widespread use of this standard. This paper compares the response of a specific Gamesa dynamic wind turbine model to the corresponding generic IEC Type III wind turbine model response when the wind turbine is subjected to a three-phase voltage dip. This Type III model represents the doubly-fed induction generator wind turbine, which is not only one of the most commonly sold and installed technologies in the current market but also a complex variable-speed operation implementation. In fact, active and reactive power transients are observed due to the voltage reduction. Special attention is given to the reactive power injection provided by the wind turbine models because it is a requirement of current grid codes. Further, the boundaries of the generic models associated with transient events that cannot be represented exactly are included in the paper.

  19. 49 CFR 571.118 - Standard No. 118; Power-operated window, partition, and roof panel systems.

    Science.gov (United States)

    2010-10-01

    ...-operated window, partition, and roof panel systems. S1. Purpose and scope. This standard specifies requirements for power operated window, partition, and roof panel systems to minimize the likelihood of death.... S5. Automatic reversal systems. A power-operated window, partition, or roof panel system that is...

  20. Comparison of the Standards applied to Instrumentation and Control Systems for Nuclear Power Stations in Korea and Russia

    Energy Technology Data Exchange (ETDEWEB)

    Park, Joo Hyun; Hwang, In Koo; Lee, Dong Young

    2005-04-15

    This report describes a comparison result of technical standards applied to instrumentation and control systems for nuclear power plants between in Korea and in Russia. Russia also has a state-run organization authorized to conduct approval, cancellation, and audit in use of nuclear facility or equipment. The Russian standards for nuclear instrumentation and control equipment are analogous with the Korean ones in the aspect of basic concepts and principles. However, there are some differences in document structure, design requirements, qualification test items, depth of contents between two standard systems. The biggest deviation exists in the standard documents for seismic qualification and electromagnetic interference qualification. Korean seismic qualification standard utilizing US approach, defines testing and qualification methods specifically and clearly. Russian standards however provide only conceptual definitions and requirements in the seismic related aspects. Therefore, it is conceived that any equipment or system qualified seismically in accordance with Korean standards should additionally provide technical evidence that it is satisfactory with Russian standards as well. In electromagnetic interference qualification, because Russian standard requires more testing items than the current Korean standard, the additional qualification tests are necessary to meet the Russian requirements. However, these additional test items are based on IEC(International Electrotechnical Commission), therefore it is not a problem to perform those tests in a Korean testing facility.

  1. Comparison of the Standards applied to Instrumentation and Control Systems for Nuclear Power Stations in Korea and Russia

    International Nuclear Information System (INIS)

    Park, Joo Hyun; Hwang, In Koo; Lee, Dong Young

    2005-04-01

    This report describes a comparison result of technical standards applied to instrumentation and control systems for nuclear power plants between in Korea and in Russia. Russia also has a state-run organization authorized to conduct approval, cancellation, and audit in use of nuclear facility or equipment. The Russian standards for nuclear instrumentation and control equipment are analogous with the Korean ones in the aspect of basic concepts and principles. However, there are some differences in document structure, design requirements, qualification test items, depth of contents between two standard systems. The biggest deviation exists in the standard documents for seismic qualification and electromagnetic interference qualification. Korean seismic qualification standard utilizing US approach, defines testing and qualification methods specifically and clearly. Russian standards however provide only conceptual definitions and requirements in the seismic related aspects. Therefore, it is conceived that any equipment or system qualified seismically in accordance with Korean standards should additionally provide technical evidence that it is satisfactory with Russian standards as well. In electromagnetic interference qualification, because Russian standard requires more testing items than the current Korean standard, the additional qualification tests are necessary to meet the Russian requirements. However, these additional test items are based on IEC(International Electrotechnical Commission), therefore it is not a problem to perform those tests in a Korean testing facility

  2. A Comparative Energetic Analysis of Active and Passive Emission Control Systems Adopting Standard Emission Test Cycles

    Directory of Open Access Journals (Sweden)

    Angelo Algieri

    2012-01-01

    Full Text Available The present work aims at analysing and comparing the thermal performances of active and passive aftertreatment systems. A one-dimensional transient model has been developed in order to evaluate the heat exchange between the solid and the exhaust gas and to estimate the energy effectiveness of the apparatus. Furthermore, the effect of the engine operating conditions on the performances of emission control systems has been investigated considering standard emission test cycles. The analysis has demonstrated that the active flow control presents the higher thermal inertia and it appears more suitable to maintain the converter initial temperature level for a longer time after variations in engine load. Conversely, the traditional passive flow control is preferable when rapid “cooling” or “heating” of the solid phase is requested. Moreover, the investigation has highlighted the significant influence of the cycle time and converter length on the energetic performances of the aftertreatment apparatus.

  3. RE/H2 Production Micro-System Based on Standard Alkaline Electrolytic Technology

    International Nuclear Information System (INIS)

    Moschetto, A.; Tina, G.M.; Ferraro, M.; Briguglio, N.; Antonucci, V.

    2006-01-01

    This paper presents the first task of a more comprehensive research project focused on the development of micro-scale (1-20 kW) Renewable Hydrogen (RE/H 2 ) production systems oriented to carry on a wide campaign of educational and demonstration projects. The paper proposes to rely on low-cost and rugged 'standard' alkaline electrolytic technology, well suited for decentralized hydrogen production, but requiring a certain R and D effort to get technical competitiveness. An electrolyser test facility has been designed and carried out. Then performance assessment of a commercial electrolyser and its sub-systems has been accomplished. First experimental results stated that the unit under test gets an average production efficiency of 51%, versus a stack (cell) efficiency of about 62%, while the aged AC/DC power converter, to be removed or replaced to adapt the unit to DC link with renewables, requires more than 16% of the incoming power. (authors)

  4. Toward Global Standards on Peaceful uses of Space Nuclear Reactor Power Systems

    Science.gov (United States)

    El-Genk, M. S.

    Space reactor power systems are enabling to future space exploration and outposts on the Moon, Mars and other celestial bodies. They could provide for electrical propulsion, thermal propulsion and bimodal operation of thermal propulsion and electrical power generation. The much higher specific impulse of nuclear thermal and electric propulsion, compared to chemical rockets, could significantly shorten the travel time to Mars and farthest destinations, reducing the exposure of equipment and astronauts to the harmful space radiation. This article addresses safety issues relevant to the design, operation and end-of-life storage of these systems in an attempt to stimulate a discussion of the need to establish specific and globally agreed upon safety standards and guidelines for future peaceful uses.

  5. Using insurance standards and policy levers to build a high performance health system.

    Science.gov (United States)

    Bailit, Michael; Koller, Christopher

    2009-11-01

    This issue brief examines an unprecedented use of state health insurance regulatory authority to promote health system reform. In 2004, the Rhode Island legislature created the Office of the Health Insurance Commissioner (OHIC) with authority not granted to state health insurance regulatory agencies in other states. Specifically, the legislation instructed OHIC to direct insurers toward policies that promote improved accessibility, quality, and affordability for the Rhode Island health system. In 2009, OHIC used this authority to implement a set of standards to promote increased affordability through a series of requirements aimed at strengthening and expanding the state's primary care infrastructure. Insurers are required to increase their investments in primary care on a cost-neutral basis, expand use of the chronic care model medical home, and support implementation of electronic medical records. Rhode Island is testing whether state insurance regulation can foster a profound transformation in health care delivery.

  6. SCALE: A modular code system for performing standardized computer analyses for licensing evaluation

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-03-01

    This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This manual covers an array of modules written for the SCALE package, consisting of drivers, system libraries, cross section and materials properties libraries, input/output routines, storage modules, and help files.

  7. Use of non standard methods for seismic evaluation of piping systems in existing plants

    International Nuclear Information System (INIS)

    Geraets, L.H.; Lafaille, J.P.; Mignot, P.

    1989-01-01

    Seismic design and analysis of nuclear plant structures, systems and components have requested huge efforts and tremendous costs in the past fifteen years. The extended use of sophisticated, linear response-type methods are responsible for the significant stiffening of the piping systems and the multiplication of supports, and in particular of snubbers. The remedy used against the seismic risk seems to be worse than the disease itself, and safety might be impaired rather than improved. Indeed, stiffening of the system increases the average load level in normal operation, supports do not behave ideally as assumed and snubbers happen to be remarkably unreliable. On the other hand, experience with actual earthquakes shows that industrial facilities designed using very simplistic seismic techniques or even no seismic requirement at all suffer essentially no damage, even in the case of a large earthquake. This paradox challenges the traditional design techniques, and appeals for revised approaches for seismic qualification of piping systems. When the assumption of the occurrence of an earthquake event is made in a plant in operation, which has not been designed using seismic criteria, the use of the standard seismic qualification techniques would still be more questionable. The use of simplified quasi-static techniques, backed when requested with sophisticated time history non linear analyses, allows to assess the seismic adequacy of the safety-related critical piping systems with a minimum backfitting actions

  8. Reliability study: digital reactor protection system of Korean standard nuclear power plant

    International Nuclear Information System (INIS)

    Kang, H. G.; Jang, S. C.; Eom, H. S.; Jeong, H. S.

    2003-02-01

    Digital safety-critical systems which are now installed in Korean Standard Nuclear Power Plants (KSNPP) would be quantitatively evaluated in order to prove the safety. In this study, we quantify the safety of the digital reactor protection system in KSNPPs using PSA technology. This study also includes the detailed investigation of the target system operation. The Fault Tree (FT) models were constructed for 15 reactor trip parameters. For digital parts, because the operation data for the same type PWR was unavailable, we used the data provided by vendors. On the other hand, for the conventional analog/mechanical parts, we used experience data presented in KAERI/TR-2164/2002.The result of quantification shows that the system unavailability varies from 4.36E-5 to 8.96E-4 according to the trip parameter. Main contributor to the difference from the conventional analysis would be the difference in human failure probability estimation. Generally, the system unavailability depends on several important factors: Human failure probability, software failure probability, watchdog timer coverage, and common cause failure estimation

  9. SRAC: JAERI thermal reactor standard code system for reactor design and analysis

    International Nuclear Information System (INIS)

    Tsuchihashi, Keichiro; Takano, Hideki; Horikami, Kunihiko; Ishiguro, Yukio; Kaneko, Kunio; Hara, Toshiharu.

    1983-01-01

    The SRAC (Standard Reactor Analysis Code) is a code system for nuclear reactor analysis and design. It is composed of neutron cross section libraries and auxiliary processing codes, neutron spectrum routines, a variety of transport, 1-, 2- and 3-D diffusion routines, dynamic parameters and cell burn-up routines. By making the best use of the individual code function in the SRAC system, the user can select either the exact method for an accurate estimate of reactor characteristics or the economical method aiming at a shorter computer time, depending on the purpose of study. The user can select cell or core calculation; fixed source or eigenvalue problem; transport (collision probability or Sn) theory or diffusion theory. Moreover, smearing and collapsing of macroscopic cross sections are separately done by the user's selection. And a special attention is paid for double heterogeneity. Various techniques are employed to access the data storage and to optimize the internal data transfer. Benchmark calculations using the SRAC system have been made extensively for the Keff values of various types of critical assemblies (light water, heavy water and graphite moderated systems, and fast reactor systems). The calculated results show good prediction for the experimental Keff values. (author)

  10. Detection of systemic hypersensitivity to drugs using standard guinea pig assays.

    Science.gov (United States)

    Weaver, James L; Staten, David; Swann, Joslyn; Armstrong, George; Bates, Melissa; Hastings, Kenneth L

    2003-12-01

    The most commonly used assays designed to detect either skin or systemic immune-based hypersensitivity reactions are those using guinea pigs (GP). We obtained data from various FDA records to evaluate the correlation between GP assay results and reported post-marketing systemic hypersensitivity reactions. We examined the new drug application (NDA) reviews of approved drugs for the results of GP assays. Post-marketing human data were extracted from the FDA adverse event reporting system (AERS). Drug usage data were obtained from a commercial database maintained by IMS Health Inc. We found 83 (21%) of 396 drugs approved between 1978 and 1998 had reported GP test results. Among these 83 drugs, 14 (17%) were found to have positive results in at least one GP assay. Simple reporting index (RI) values for systemic hypersensitivity reactions were calculated from AERS data and usage to produce the index of adverse event reports per million shipping units of drug. A variety of definitions of positive human response were examined. A statistically significant association was seen for rash between post-marketing and clinical trials adverse event reports. No statistically significant associations between human data and GP test results were observed. These data suggest that standard GP assays have limited ability to predict human systemic hypersensitivity potential for pharmaceuticals.

  11. SCALE: A modular code system for performing standardized computer analyses for licensing evaluation

    International Nuclear Information System (INIS)

    1997-03-01

    This Manual represents Revision 5 of the user documentation for the modular code system referred to as SCALE. The history of the SCALE code system dates back to 1969 when the current Computational Physics and Engineering Division at Oak Ridge National Laboratory (ORNL) began providing the transportation package certification staff at the U.S. Atomic Energy Commission with computational support in the use of the new KENO code for performing criticality safety assessments with the statistical Monte Carlo method. From 1969 to 1976 the certification staff relied on the ORNL staff to assist them in the correct use of codes and data for criticality, shielding, and heat transfer analyses of transportation packages. However, the certification staff learned that, with only occasional use of the codes, it was difficult to become proficient in performing the calculations often needed for an independent safety review. Thus, shortly after the move of the certification staff to the U.S. Nuclear Regulatory Commission (NRC), the NRC staff proposed the development of an easy-to-use analysis system that provided the technical capabilities of the individual modules with which they were familiar. With this proposal, the concept of the Standardized Computer Analyses for Licensing Evaluation (SCALE) code system was born. This manual covers an array of modules written for the SCALE package, consisting of drivers, system libraries, cross section and materials properties libraries, input/output routines, storage modules, and help files

  12. Educational Labeling System for Atmospheres (ELSA): Python Tool Development for Archiving Under the PDS4 Standard

    Science.gov (United States)

    Neakrase, Lynn; Hornung, Danae; Sweebe, Kathrine; Huber, Lyle; Chanover, Nancy J.; Stevenson, Zena; Berdis, Jodi; Johnson, Joni J.; Beebe, Reta F.

    2017-10-01

    The Research and Analysis programs within NASA’s Planetary Science Division now require archiving of resultant data with the Planetary Data System (PDS) or an equivalent archive. The PDS Atmospheres Node is developing an online environment for assisting data providers with this task. The Educational Labeling System for Atmospheres (ELSA) is being designed with Django/Python coding to provide an easier environment for facilitating not only communication with the PDS node, but also streamlining the process of learning, developing, submitting, and reviewing archive bundles under the new PDS4 archiving standard. Under the PDS4 standard, data are archived in bundles, collections, and basic products that form an organizational hierarchy of interconnected labels that describe the data and relationships between the data and its documentation. PDS4 labels are implemented using Extensible Markup Language (XML), which is an international standard for managing metadata. Potential data providers entering the ELSA environment can learn more about PDS4, plan and develop label templates, and build their archive bundles. ELSA provides an interface to tailor label templates aiding in the creation of required internal Logical Identifiers (URN - Uniform Resource Names) and Context References (missions, instruments, targets, facilities, etc.). The underlying structure of ELSA uses Django/Python code that make maintaining and updating the interface easy to do for our undergraduate/graduate students. The ELSA environment will soon provide an interface for using the tailored templates in a pipeline to produce entire collections of labeled products, essentially building the user’s archive bundle. Once the pieces of the archive bundle are assembled, ELSA provides options for queuing the completed bundle for peer review. The peer review process has also been streamlined for online access and tracking to help make the archiving process with PDS as transparent as possible. We discuss the

  13. From Business Model to System Architecture Considering Goals, Aspects and Quality Standards

    Directory of Open Access Journals (Sweden)

    Jean Carlos Guzmán

    2013-12-01

    Full Text Available At present business models have been converted into strategic assets for enterprise organizations. They facilitate information management for decisions making, transactions between parties and optimized services. The goal of this work is to present an Architectural Design Process (DAOMAC integrating Goals, Aspects and Quality Standards techniques and practices, to obtain an Initial Architecture for the software system from the business model. The main contribution of this work is to consider explicitly non-functional requirements in the different abstraction levels involved in the process to obtain the initial architecture model, and guaranteeing their traceability: tasks originating non-functional goals in the business model where they are not explicitly considered, non-functional crosscutting goals in the goal model, crosscutting concerns treated as softgoals and operationalizations in the SIG (Softgoal Interdependency Graph model. The main artifact obtained is the initial architecture and its logical view can be appreciated in the DAOMAC application to the case study, an administrative service process of the Citizen Identification and Registration System. Another important contribution is the specification of non-functional requirements by the ISO/IEC 25010 standard to facilitate their traceability and the communication among work groups.

  14. An Innovative Needle-free Injection System: Comparison to 1 ml Standard Subcutaneous Injection.

    Science.gov (United States)

    Kojic, Nikola; Goyal, Pragun; Lou, Cheryl Hamer; Corwin, Michael J

    2017-11-01

    A needle-free delivery system may lead to improved satisfaction and compliance, as well as reduced anxiety among patients requiring frequent or ongoing injections. This report describes a first-in-man assessment comparing Portal Instruments' innovative needle-free injection system with subcutaneous injections using a 27G needle. Forty healthy volunteer participants each received a total of four injections of 1.0 mL sterile saline solution, two with a standard subcutaneous injection using a 27G needle, and two using the Portal injection system. Perception of pain was measured using a 100-mm visual analog scale (VAS). Injection site reactions were assessed at 2 min and at 20-30 min after each injection. Follow-up contact was made 24-48 h after the injections. Subject preference regarding injection type was also assessed. VAS pain scores at Portal injection sites met the criteria to be considered non-inferior to the pain reported at 27G needle injection sites (i.e., upper 95% confidence bound less than +5 mm). Based on a mixed effects model, at time 0, accounting for potential confounding variables, the adjusted difference in VAS scores indicated that Portal injections were 6.5 mm lower than the 27G needle injections (95% CI -10.5, -2.5). No clinically important adverse events were noted. Portal injections were preferred by 24 (60%) of the subjects (P = 0.0015). As an early step in the development of this new needle-free delivery system, the current study has shown that a 1.0-mL saline injection can be given with less pain reported than a standard subcutaneous injection using a 27G needle.

  15. Open Source and Open Standard based decision support system: the example of lake Verbano floods management.

    Science.gov (United States)

    Cannata, Massimiliano; Antonovic, Milan; Pozzoni, Maurizio; Graf, Andrea

    2015-04-01

    The Locarno area (Switzerland, Canton Ticino) is exposed to lacual floods with a return period of about 7-8 years. The risk is of particular concern because the area is located in a floodplain that registered in the last decades a great increase in settlement and values of the real estates. Moreover small differences in lake altitude may produce a significant increase in flooded area due to the very low average slope of the terrain. While fatalities are not generally registered, several important economic costs are associated, e.g.: damages to real estates, interruption of activities, evacuation and relocation and environmental damages. While important events were registered in 1978, 1993, 2000, 2002 and 2014 the local stakeholder invested time and money in the set-up of an up-to-date decision support system that allows for the reduction of risks. Thanks to impressive technological advances the visionary concept of the Digital Earth (Gore 1992, 1998) is being realizing: geospatial coverages and monitoring systems data are increasingly available on the Web, and more importantly, in a standard format. As a result, today is possible to develop innovative decision support systems (Molinari et al. 2013) which mesh-up several information sources and offers special features for risk scenarios evaluation. In agreement with the exposed view, the authors have recently developed a new Web system whose design is based on the Service Oriented Architecture pattern. Open source software (e.g.: Geoserver, PostGIS, OpenLayers) has been used throughout the whole system and geospatial Open Standards (e.g.: SOS, WMS, WFS) are the pillars it rely on. SITGAP 2.0, implemented in collaboration with the Civil protection of Locarno e Vallemaggia, combines a number of data sources such as the Federal Register of Buildings and Dwellings, the Cantonal Register of residents, the Cadastral Surveying, the Cantonal Hydro-meteorological monitoring observations, the Meteoswiss weather forecasts, and

  16. A Multi-Center Space Data System Prototype Based on CCSDS Standards

    Science.gov (United States)

    Rich, Thomas M.

    2016-01-01

    Deep space missions beyond earth orbit will require new methods of data communications in order to compensate for increasing Radio Frequency (RF) propagation delay. The Consultative Committee for Space Data Systems (CCSDS) standard protocols Spacecraft Monitor & Control (SM&C), Asynchronous Message Service (AMS), and Delay/Disruption Tolerant Networking (DTN) provide such a method. However, the maturity level of this protocol stack is insufficient for mission inclusion at this time. This Space Data System prototype is intended to provide experience which will raise the Technical Readiness Level (TRL) of this protocol set. In order to reduce costs, future missions can take advantage of these standard protocols, which will result in increased interoperability between control centers. This prototype demonstrates these capabilities by implementing a realistic space data system in which telemetry is published to control center applications at the Jet Propulsion Lab (JPL), the Marshall Space Flight Center (MSFC), and the Johnson Space Center (JSC). Reverse publishing paths for commanding from each control center are also implemented. The target vehicle consists of realistic flight computer hardware running Core Flight Software (CFS) in the integrated Power, Avionics, and Power (iPAS) Pathfinder Lab at JSC. This prototype demonstrates a potential upgrade path for future Deep Space Network (DSN) modification, in which the automatic error recovery and communication gap compensation capabilities of DTN would be exploited. In addition, SM&C provides architectural flexibility by allowing new service providers and consumers to be added efficiently anywhere in the network using the common interface provided by SM&C's Message Abstraction Layer (MAL). In FY 2015, this space data system was enhanced by adding telerobotic operations capability provided by the Robot API Delegate (RAPID) family of protocols developed at NASA. RAPID is one of several candidates for consideration and

  17. Health information system to improve elderly health study of health information system in us to setup standard for developing countries

    Directory of Open Access Journals (Sweden)

    Dolatabadi Nasrin Davari

    2013-01-01

    Full Text Available In this paper the state of health information system in US investigated to reach an instance for developing countries. Our main concern was to obtain how HIS and HIT help to increase public and especially elderly health. We do this investigation to setup standard bound to use in developing countries. HIS and HIT transit a mismanaged paper structure of record keeping to an efficient electronic database for record keeping. It will transform the method of management of data to ensure better information results for overall quality improvement. Health information System professionals also play pivotal role information interoperability. Information interoperability helps in easy transfer of data wherever it is needed. Information interoperability is essentially a function of hospitals, but the role played by HIS professionals makes them a good choice for interoperability developers in healthcare.

  18. NASA'S Standard Measures During Bed Rest: Adaptations in the Cardiovascular System

    Science.gov (United States)

    Lee, Stuart M. C.; Feiveson, Alan H.; Martin, David S.; Cromwell, Roni L.; Platts, Steven H.; Stenger, Michael B.

    2016-01-01

    Bed rest is a well-accepted analog of space flight that has been used extensively to investigate physiological adaptations in a larger number of subjects in a shorter amount of time than can be studied with space flight and without the confounding effects associated with normal mission operations. However, comparison across studies of different bed rest durations, between sexes, and between various countermeasure protocols have been hampered by dissimilarities in bed rest conditions, measurement protocols, and testing schedules. To address these concerns, NASA instituted standard bed rest conditions and standard measures for all physiological disciplines participating in studies conducted at the Flight Analogs Research Unit (FARU) at the University of Texas-Medical Branch. Investigators for individual studies employed their own targeted study protocols to address specific hypothesis-driven questions, but standard measures tests were conducted within these studies on a non-interference basis to maximize data availability while reducing the need to implement multiple bed rest studies to understand the effects of a specific countermeasure. When possible, bed rest standard measures protocols were similar to tests nominally used for medically-required measures or research protocols conducted before and after Space Shuttle and International Space Station missions. Specifically, bed rest standard measures for the cardiovascular system implemented before, during, and after bed rest at the FARU included plasma volume (carbon monoxide rebreathing), cardiac mass and function (2D, 3D and Doppler echocardiography), and orthostatic tolerance testing (15- or 30-minutes of 80 degree head-up tilt). Results to-date indicate that when countermeasures are not employed, plasma volume decreases and the incidence of presyncope during head-up tilt is more frequent even after short-duration bed rest while reductions in cardiac function and mass are progressive as bed rest duration

  19. Standardized Automated CO2/H2O Flux Systems for Individual Research Groups and Flux Networks

    Science.gov (United States)

    Burba, George; Begashaw, Israel; Fratini, Gerardo; Griessbaum, Frank; Kathilankal, James; Xu, Liukang; Franz, Daniela; Joseph, Everette; Larmanou, Eric; Miller, Scott; Papale, Dario; Sabbatini, Simone; Sachs, Torsten; Sakai, Ricardo; McDermitt, Dayle

    2017-04-01

    In recent years, spatial and temporal flux data coverage improved significantly, and on multiple scales, from a single station to continental networks, due to standardization, automation, and management of data collection, and better handling of the extensive amounts of generated data. With more stations and networks, larger data flows from each station, and smaller operating budgets, modern tools are required to effectively and efficiently handle the entire process. Such tools are needed to maximize time dedicated to authoring publications and answering research questions, and to minimize time and expenses spent on data acquisition, processing, and quality control. Thus, these tools should produce standardized verifiable datasets and provide a way to cross-share the standardized data with external collaborators to leverage available funding, promote data analyses and publications. LI-COR gas analyzers are widely used in past and present flux networks such as AmeriFlux, ICOS, AsiaFlux, OzFlux, NEON, CarboEurope, and FluxNet-Canada, etc. These analyzers have gone through several major improvements over the past 30 years. However, in 2016, a three-prong development was completed to create an automated flux system which can accept multiple sonic anemometer and datalogger models, compute final and complete fluxes on-site, merge final fluxes with supporting weather soil and radiation data, monitor station outputs and send automated alerts to researchers, and allow secure sharing and cross-sharing of the station and data access. Two types of these research systems were developed: open-path (LI-7500RS) and enclosed-path (LI-7200RS). Key developments included: • Improvement of gas analyzer performance • Standardization and automation of final flux calculations onsite, and in real-time • Seamless integration with latest site management and data sharing tools In terms of the gas analyzer performance, the RS analyzers are based on established LI-7500/A and LI-7200

  20. A Web 2.0 and OGC Standards Enabled Sensor Web Architecture for Global Earth Observing System of Systems

    Science.gov (United States)

    Mandl, Daniel; Unger, Stephen; Ames, Troy; Frye, Stuart; Chien, Steve; Cappelaere, Pat; Tran, Danny; Derezinski, Linda; Paules, Granville

    2007-01-01

    This paper will describe the progress of a 3 year research award from the NASA Earth Science Technology Office (ESTO) that began October 1, 2006, in response to a NASA Announcement of Research Opportunity on the topic of sensor webs. The key goal of this research is to prototype an interoperable sensor architecture that will enable interoperability between a heterogeneous set of space-based, Unmanned Aerial System (UAS)-based and ground based sensors. Among the key capabilities being pursued is the ability to automatically discover and task the sensors via the Internet and to automatically discover and assemble the necessary science processing algorithms into workflows in order to transform the sensor data into valuable science products. Our first set of sensor web demonstrations will prototype science products useful in managing wildfires and will use such assets as the Earth Observing 1 spacecraft, managed out of NASA/GSFC, a UASbased instrument, managed out of Ames and some automated ground weather stations, managed by the Forest Service. Also, we are collaborating with some of the other ESTO awardees to expand this demonstration and create synergy between our research efforts. Finally, we are making use of Open Geospatial Consortium (OGC) Sensor Web Enablement (SWE) suite of standards and some Web 2.0 capabilities to Beverage emerging technologies and standards. This research will demonstrate and validate a path for rapid, low cost sensor integration, which is not tied to a particular system, and thus be able to absorb new assets in an easily evolvable, coordinated manner. This in turn will help to facilitate the United States contribution to the Global Earth Observation System of Systems (GEOSS), as agreed by the U.S. and 60 other countries at the third Earth Observation Summit held in February of 2005.

  1. Continuous improvement in national ART standards by the RTAC accreditation system in Australia and New Zealand.

    Science.gov (United States)

    Harrison, Keith; Peek, John; Chapman, Michael; Bowman, Mark

    2017-02-01

    Assisted reproductive technology (ART) clinics in Australia and New Zealand are accredited and licensed against a Code of Practice audited by certifying bodies accredited by the Joint Accreditation System for Australia and New Zealand (JAS-ANZ). The system is administered by the Reproductive Technology Accreditation Committee (RTAC) of the Fertility Society of Australia. To review the incidence of variances and findings identified by certifying bodies in Australian and New Zealand ART clinics within the currency of a single version of the Code of Practice. Retrospective analysis of certifying body findings against the RTAC Code of Practice incorporating 15 Critical Criteria audited annually and 16 Good Practice Criteria including a Quality Management System audited over a three year cycle. The incidence of clinics with variances against the Critical Criteria fell from 77 to 14% over two years, as did the mean number of variances per clinic which fell from 1.54 to 0.14. Implementation of the RTAC accreditation system in Australia and New Zealand has contributed to steady improvement in standards and a reduction in risk in ART treatments. © 2016 The Royal Australian and New Zealand College of Obstetricians and Gynaecologists.

  2. Development of Standardized Power Electronic Components, Subsystems, and Systems for Increased Modularity and Scalability

    Energy Technology Data Exchange (ETDEWEB)

    Chakraborty, S.; Pink, C.; Price, J.; Kroposki, B.; Kern, G.

    2007-11-01

    Power electronics devices hold substantial promise for making distributed energy applications more efficient and cost effective. This project is motivated towards developing and testing inverters that will allow distributed energy systems to provide ancillary services such as voltage and VAR regulation, and increased grid reliability by seamlessly transitioning between grid-tied and stand-alone operation modes. The objectives of this project are to identify system integration and optimization issues and technologies and to provide solutions through research, analysis, and testing of power electronic interfaces for distributed energy applications that are cost-competitive and have substantially faster response times than conventional technologies. In addition, the testing of power electronics interfaces will develop a technical basis for performance assessment for distributed energy systems, subsystems, and components that will finally create a foundation for standardized measurements and test procedures. The ultimate goal for this research is to advance the potential benefits of distributed energy to provide ancillary services, enhance power system reliability, and allow customer choice.

  3. Developing an ANSI standard for image quality tools for the testing of active millimeter wave imaging systems

    Science.gov (United States)

    Barber, Jeffrey; Greca, Joseph; Yam, Kevin; Weatherall, James C.; Smith, Peter R.; Smith, Barry T.

    2017-05-01

    In 2016, the millimeter wave (MMW) imaging community initiated the formation of a standard for millimeter wave image quality metrics. This new standard, American National Standards Institute (ANSI) N42.59, will apply to active MMW systems for security screening of humans. The Electromagnetic Signatures of Explosives Laboratory at the Transportation Security Laboratory is supporting the ANSI standards process via the creation of initial prototypes for round-robin testing with MMW imaging system manufacturers and experts. Results obtained for these prototypes will be used to inform the community and lead to consensus objective standards amongst stakeholders. Images collected with laboratory systems are presented along with results of preliminary image analysis. Future directions for object design, data collection and image processing are discussed.

  4. Safety critical systems handbook a straightforward guide to functional safety : IEC 61508 (2010 edition) and related standards

    CERN Document Server

    Smith, David J

    2010-01-01

    Electrical, electronic and programmable electronic systems increasingly carry out safety functions to guard workers and the public against injury or death and the environment against pollution. The international functional safety standard IEC 61508 was revised in 2010, and this is the first comprehensive guide available to the revised standard. As functional safety is applicable to many industries, this book will have a wide readership beyond the chemical and process sector, including oil and gas, power generation, nuclear, aircraft, and automotive industries, plus project, instrumentation, design, and control engineers. * The only comprehensive guide to IEC 61508, updated to cover the 2010 amendments, that will ensure engineers are compliant with the latest process safety systems design and operation standards* Helps readers understand the process required to apply safety critical systems standards* Real-world approach helps users to interpret the standard, with case studies and best practice design examples...

  5. Impact of a standardized rapid response system on outcomes in a large healthcare jurisdiction.

    Science.gov (United States)

    Chen, Jack; Ou, Lixin; Flabouris, Arthas; Hillman, Ken; Bellomo, Rinaldo; Parr, Michael

    2016-10-01

    To assess the impact of a standardized rapid response system (RRS) implemented across a large health care jurisdiction on reducing serious adverse events, hospital mortality and unexpected deaths. We conducted an interrupted time series (2007-2013) population-based study in the state of New South Wales (NSW), Australia to evaluate the impact of introducing a statewide standardized RRS (the between-the-flags [BTF] system) which employed a five-component intervention strategy. We studied 9,799,081 admissions in all 232 public hospitals in NSW. We studied changes in trends for annual rates of multiple key patient-centered outcomes before and after its introduction. Before the BTF system (2007-2009), there was a progressive decrease in mortality, cardiac arrest rates, cardiac arrests related mortality, and failure to rescue rates, but no changes in mortality rate among low mortality diagnostic related group (LMDRGs) patients. After the BTF program (2010-2013), the same trends continued for all outcomes with an overall (2013 vs 2007) 46% reduction in cardiac arrest rates; a 54% reduction in cardiac arrest related mortality rates; a 19% reduction in hospital mortality; a 35% decrease in failure to rescue rates (all Ps<0.001) over seven-years. In addition, there was a new 20% (p<0.001) mortality reduction among LMDRG patients (2013 vs 2007). The BTF program was associated with continued decrease in the overall cardiac arrests rates, deaths after cardiac arrest, hospital mortality and failure to rescue. In addition, among patients in the LMDRC group, it induced a new and significant post-intervention reduction in mortality which was never reported before. Crown Copyright © 2016. Published by Elsevier Ireland Ltd. All rights reserved.

  6. A new standardized data collection system for interdisciplinary thyroid cancer management: Thyroid COBRA.

    Science.gov (United States)

    Tagliaferri, Luca; Gobitti, Carlo; Colloca, Giuseppe Ferdinando; Boldrini, Luca; Farina, Eleonora; Furlan, Carlo; Paiar, Fabiola; Vianello, Federica; Basso, Michela; Cerizza, Lorenzo; Monari, Fabio; Simontacchi, Gabriele; Gambacorta, Maria Antonietta; Lenkowicz, Jacopo; Dinapoli, Nicola; Lanzotti, Vito; Mazzarotto, Renzo; Russi, Elvio; Mangoni, Monica

    2018-02-21

    The big data approach offers a powerful alternative to Evidence-based medicine. This approach could guide cancer management thanks to machine learning application to large-scale data. Aim of the Thyroid CoBRA (Consortium for Brachytherapy Data Analysis) project is to develop a standardized web data collection system, focused on thyroid cancer. The Metabolic Radiotherapy Working Group of Italian Association of Radiation Oncology (AIRO) endorsed the implementation of a consortium directed to thyroid cancer management and data collection. The agreement conditions, the ontology of the collected data and the related software services were defined by a multicentre ad hoc working-group (WG). Six Italian cancer centres were firstly started the project, defined and signed the Thyroid COBRA consortium agreement. Three data set tiers were identified: Registry, Procedures and Research. The COBRA-Storage System (C-SS) appeared to be not time-consuming and to be privacy respecting, as data can be extracted directly from the single centre's storage platforms through a secured connection that ensures reliable encryption of sensible data. Automatic data archiving could be directly performed from Image Hospital Storage System or the Radiotherapy Treatment Planning Systems. The C-SS architecture will allow "Cloud storage way" or "distributed learning" approaches for predictive model definition and further clinical decision support tools development. The development of the Thyroid COBRA data Storage System C-SS through a multicentre consortium approach appeared to be a feasible tool in the setup of complex and privacy saving data sharing system oriented to the management of thyroid cancer and in the near future every cancer type. Copyright © 2018. Published by Elsevier B.V.

  7. Financing the New Adequacy: Towards New Models of State Education Finance Systems That Support Standards Based Reform.

    Science.gov (United States)

    Verstegen, Deborah A.

    2002-01-01

    Discusses need for reinventing state education finance systems to provide adequacy and equity aligned to standards-based reform. Provides initial specifications for "The New Finance." Examines in depth approaches for determining a base spending level considered adequate for the average child to reach high educational standards. (Contains…

  8. 40 CFR 63.7915 - What emissions limitations and work practice standards must I meet for transfer systems?

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false What emissions limitations and work practice standards must I meet for transfer systems? 63.7915 Section 63.7915 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR PROGRAMS (CONTINUED) NATIONAL EMISSION STANDARDS FOR HAZARDOUS AIR POLLUTANTS FOR SOURCE CATEGORIES ...

  9. Long-term safety profile of belimumab plus standard therapy in patients with systemic lupus erythematosus.

    Science.gov (United States)

    Merrill, Joan T; Ginzler, Ellen M; Wallace, Daniel J; McKay, James D; Lisse, Jeffrey R; Aranow, Cynthia; Wellborne, Frank R; Burnette, Michael; Condemi, John; Zhong, Z John; Pineda, Lilia; Klein, Jerry; Freimuth, William W

    2012-10-01

    To evaluate the safety profile of long-term belimumab therapy combined with standard therapy for systemic lupus erythematosus (SLE) in patients with active disease. Patients who were randomized to receive intravenous placebo or belimumab 1, 4, or 10 mg/kg, plus standard therapy, and completed the initial 52-week double-blind treatment period were then allowed to enter a 24-week open-label extension phase. During the extension period, patients in the belimumab group either received the same dose or were switched to 10 mg/kg and patients in the placebo group were switched to belimumab 10 mg/kg. Patients who achieved a satisfactory response during the 24-week extension period were allowed to participate in the long-term continuation study of monthly belimumab 10 mg/kg. Adverse events (AEs) and abnormal laboratory results were analyzed per 100 patient-years in 1-year intervals. Of the 364 patients who completed the 52-week double-blind treatment period, 345 entered the 24-week extension, and 296 continued treatment with belimumab in the long-term continuation study. Safety data through 4 years of belimumab exposure (1,165 cumulative patient-years) are reported. Incidence rates of AEs, severe/serious AEs, infusion reactions, infections, malignancies, grades 3/4 laboratory abnormalities, and discontinuations due to AEs were stable or declined during 4-year belimumab exposure. The most common AEs included arthralgia, upper respiratory tract infection, headache, fatigue, and nausea. Serious infusion reactions were rare: only 1 occurred during the 4-year followup period. Rates of serious infection decreased from 5.9/100 patient-years to 3.4/100 patient-years, and no specific type of infection predominated. Belimumab added to standard therapy was generally well-tolerated over the 4-year treatment period in patients with SLE, which suggests that belimumab can be administered long term with an acceptable safety profile. Copyright © 2012 by the American College of Rheumatology.

  10. Nuclear reactors. Use of the protection system for non-safety purposes (International Electrotechnical Commission Standard Publication 639:1979)

    International Nuclear Information System (INIS)

    Stefanik, J.

    1996-01-01

    This standard applies to the protection system of a nuclear reactor and, more especially, to all interconnections between a reactor protection system (as defined and explained in International Electrotechnical Commission Publication 231 A, first supplement to Publication 231, General Principles of Nuclear Reactor Instrumentation) and all other systems and equipment not part of the protection system, except: a) the physical connection between sensors of the protection system and the physical variables that they monitor, such as for example, thermo wells, moderating medium for neutron sensors, etc.; b) the electrical connection between the protection system and the reactor control rods or other safety mechanism; c) the electrical and pneumatic connections to the power distribution system (mains) and pneumatic supplies that supply power to the protection system. Although many clauses relate to all reactor protection systems, this standard applies mainly to protection systems in nuclear power reactors

  11. The Healthcare Public System – Does Standardization Withhold the Bucket from Leaking?

    Directory of Open Access Journals (Sweden)

    Biţoiu Teodora

    2017-12-01

    Full Text Available The public healthcare system is heavily influenced by the 3C trilemma - cost - coverage - choice. The paper’s argument tackles the fact that should the public decision on improving capacity be leaning towards universal coverage in would result in efficiency losses and, in an attempt to control the costs it would limit patients’ choice. Should priority be given to performance or value? The present paper deals with the compromise between the equity and efficiency, a leaky bucket that becomes more visible in the struggle to build capacity and intervene in the market by setting standards. Setting healthcare standards is a global concern, the 3rd Sustainable Development Goal is a clear proof of that the aim to emphasise and better analyse two of the most influential variables: efficiency and equity. All in all, what we argue is that the current leaky bucket is a trade-off between choice, coverage, and cost. For a complex public service like healthcare, targeting a full coverage and multiple choice would incur huge costs and, cutting costs considerably restricts both the choice and coverage. The cost is influenced by the production capacity use when the activity has large fixed costs.

  12. Small scale biomass heating systems: Standards, quality labelling and market driving factors - An EU outlook

    International Nuclear Information System (INIS)

    Verma, V.K.; De Ruyck, J.; Bram, S.

    2009-01-01

    In the present study a comparative evaluation of several existing quality labels and standards for small scale biomass heating systems (BHS) and the biomass fuels they use was performed. With the introduction of pellet fuels, biomass heating technology achieved enough maturity to successfully compete with oil/gas heating devices in terms of ease of use, utilization of energy and pollutant emissions. From indoor air quality and related health risks point of view, quality labelling of both BHS and fuel they use leads to stricter emissions, efficiency and safety requirements as compared to National and EU standards. Several measures supporting this green energy market in the active countries (Sweden, Nordic countries, Germany, France and Austria) were investigated. It was found that policies and financial incentives such as the Finance Law (2005-2009) in France and Market Incentives Programme (1999-2006) in Germany are the most successful. German regulations and quality label (Blue Angel) provide the stringent quality requirements for residential BHS. In Belgium, Wallonia is the most active region for biomass energy utilization (83.5 MW for residential heating in 2007). A quality label for small scale BHS however does not yet exist. An equivalent label (Optimaz) exists for oil fired residential boilers. Emphasis has been placed upon using Optimaz as a reference and to compare with other existing quality labels. As a result, an effort had been made to move ahead in the preliminary study for development of a quality label for Belgian. (author)

  13. 25 CFR 547.6 - What are the minimum technical standards for enrolling and enabling Class II gaming system...

    Science.gov (United States)

    2010-04-01

    ... and enabling Class II gaming system components? 547.6 Section 547.6 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED... enabling Class II gaming system components? (a) General requirements. Class II gaming systems shall provide...

  14. 25 CFR 547.7 - What are the minimum technical hardware standards applicable to Class II gaming systems?

    Science.gov (United States)

    2010-04-01

    ... applicable to Class II gaming systems? 547.7 Section 547.7 Indians NATIONAL INDIAN GAMING COMMISSION, DEPARTMENT OF THE INTERIOR HUMAN SERVICES MINIMUM TECHNICAL STANDARDS FOR GAMING EQUIPMENT USED WITH THE PLAY... gaming systems? (a) General requirements. (1) The Class II gaming system shall operate in compliance with...

  15. 14 CFR Appendix E to Part 60 - Qualification Performance Standards for Quality Management Systems for Flight Simulation Training...

    Science.gov (United States)

    2010-01-01

    ... Quality Management Systems for Flight Simulation Training Devices E Appendix E to Part 60 Aeronautics and...—Qualification Performance Standards for Quality Management Systems for Flight Simulation Training Devices Begin... NSPM a proposed Quality Management System (QMS) program as described in this appendix. The NSPM will...

  16. Accordance System Of Distance Learning “Foundations Of Algorithmization And Programming” To International Standards Of Quality.

    Directory of Open Access Journals (Sweden)

    E. Bakumenko

    2009-06-01

    Full Text Available In the article is examined accordance of the integrated environment of study course «Foundations of algoritmization and programming» with the requirements of international standards of quality IMS and SCORM for distance learning systems.

  17. Reaping the benefits of evolutionary critical technology development - system 80+trademark standardized plant design

    International Nuclear Information System (INIS)

    Matzie, R.A.; Davis, G.A.; Bagnal, C.W. Jr.; Turk, R.S.

    1993-01-01

    Light water reactors have proved themselves to be a critical part of the electrical power generation infrastructure in the United States as well as in the world. As society moves to improve the safety and economical viability of our critical technologies, we must decide the most beneficial means of making those improvements. In some cases, the critical technologies are propelled in a single leap; in others, it is the result of a continuous and deliberate series of carefully chosen steps. ABB Nuclear Systems was faced with making such a choice in the development of nuclear power plant technology. We elected to focus our development and commercialization efforts on the evolutionary System 80+ Advanced Standardized plant design. Obviously, this was because we have a strong indication that this would be the most beneficial way to meet customers' needs and reap the largest possible benefit from the development of these critical technologies. The evolutionary approach to critical technology development requires a reliance on making incremental improvements over time to the technology. This has the benefit of providing the following: 1. predictable performance based on experience, 2. enhanced safety, performance, economics 3. incremental changes in technology, 4. availability of proven equipment and systems, and 5. assured acceptance and licensability

  18. Implantation of a new Beta Secondary Standard system at Centro de Desenvolvimento da Tecnologia Nuclear

    International Nuclear Information System (INIS)

    Reynaldo, Sibele Reis

    2005-01-01

    The crescent use of beta radiation sources in medical, industrial and research applications has increased the need for higher accuracy in beta dosimetry. As the first Beta Secondary Standard system (BSS1) was developed about 20 years ago, a new BSS2 system was made commercially available to fulfill new metrological demands and to follow the technological development. The BSS2 has a new positioning set-up, high activity and long half-life beta radiation sources and a special safety system. The Centro de Desenvolvimento da Tecnologia Nuclear is the first laboratory in Latin America that has got a BSS2. This work describes the BSS2 and it compares its advantages in relation to BSS1; results of the beam uniformity tests of the radiation fields from 90 Sr/ 90 Y, 85 Kr and 147 Pm sources, that were measured with an ionization chamber and with thermoluminescent detectors, are also shown. Results show that the beta radiation fields are considered to be uniform for diameters between 8 and 20 cm according to the chosen source. (author)

  19. System on chip thermal vacuum sensor based on standard CMOS process

    Energy Technology Data Exchange (ETDEWEB)

    Li Jinfeng; Tang Zhenan; Wang Jiaqi, E-mail: ljf970204@yahoo.com.c [Department of Electronic Engineering, Dalian University of Technology, Dalian 116024 (China)

    2009-03-15

    An on-chip microelectromechanical system was fabricated in a 0.5 mum standard CMOS process for gas pressure detection. The sensor was based on a micro-hotplate (MHP) and had been integrated with a rail to rail operational amplifier and an 8-bit successive approximation register (SAR) A/D converter. A tungsten resistor was manufactured on the MHP as the sensing element, and the sacrificial layer of the sensor was made from polysilicon and etched by surface-micromachining technology. The operational amplifier was configured to make the sensor operate in constant current mode. A digital bit stream was provided as the system output. The measurement results demonstrate that the gas pressure sensitive range of the vacuum sensor extends from 1 to 10{sup 5} Pa. In the gas pressure range from 1 to 100 Pa, the sensitivity of the sensor is 0.23 mV/ Pa, the linearity is 4.95%, and the hysteresis is 8.69%. The operational amplifier can drive 200 omega resistors distortionlessly, and the SAR A/D converter achieves a resolution of 7.4 bit with 100 kHz sample rate. The performance of the operational amplifier and the SAR A/D converter meets the requirements of the sensor system.

  20. Alanine-EPR as a transfer standard dosimetry system for low energy X radiation

    International Nuclear Information System (INIS)

    Khoury, H.J.; Silva, E.J. da; Mehta, K.; Barros, V.S. de; Asfora, V.K.; Guzzo, P.L.; Parker, A.G.

    2015-01-01

    The purpose of this paper is to evaluate the use of alanine-EPR as a transfer standard dosimetry system for low energy X radiation, such as that in RS-2400, which operates in the range from 25 to 150 kV and 2 to 45 mA. Two types of alanine dosimeters were investigated. One is a commercial alanine pellets from Aérial-Centre de Ressources Technologiques, France and one was prepared in our laboratory (LMRI-DEN/UFPE). The EPR spectra of the irradiated dosimeters were recorded in the Nuclear Energy Department of UFPE, using a Bruker EMX10 EPR spectrometer operating in the X-band. The alanine-EPR dosimetry system was calibrated in the range of 20–220 Gy in this X-ray field, against an ionization chamber calibrated at the relevant X-ray energy with traceability to PTB. The results showed that both alanine dosimeters presented a linear dose response the same sensitivity, when the EPR signal was normalized to alanine mass. The total uncertainty in the measured dose was estimated to be about 3%. The results indicate that it is possible to use the alanine-EPR dosimetry system for validation of a low-energy X ray irradiator, such as RS-2400.

  1. Safety management systems and their role in achieving high standards of operational safety

    International Nuclear Information System (INIS)

    Coulston, D.J.; Baylis, C.C.

    2000-01-01

    Achieving high standards of operational safety requires a robust management framework that is visible to all personnel with responsibility for its implementation. The structure of the management framework must ensure that all processes used to manage safety interlink in a logical and coherent manner, that is, they form a management system that leads to continuous improvement in safety performance. This Paper describes BNFL's safety management system (SMS). The SMS has management processes grouped within 5 main elements: 1. Policy, 2. Organisation, 3. Planning and Implementation, 4. Measuring and Reviewing Performance, 5. Audit. These elements reflect the overall process of setting safety objective (from Policy), measuring success and reviewing the performance. Effective implementation of the SMS requires senior managers to demonstrate leadership through their commitment and accountability. However, the SMS as a whole reflects that every employee at every level within BNFL is responsible for safety of operations under their control. The SMS therefore promotes a proactive safety culture and safe operations. The system is formally documented in the Company's Environmental, Health and Safety (EHS) Manual. Within in BNFL Group, the Company structures enables the Manual to provide overall SMS guidance and co-ordination to its range of nuclear businesses. Each business develops the SMS to be appropriate at all levels of its organisation, but ensuring that each level is consistent with the higher level. The Paper concludes with a summary of BNFL's safety performance. (author)

  2. ACSYNT - A standards-based system for parametric, computer aided conceptual design of aircraft

    Science.gov (United States)

    Jayaram, S.; Myklebust, A.; Gelhausen, P.

    1992-01-01

    A group of eight US aerospace companies together with several NASA and NAVY centers, led by NASA Ames Systems Analysis Branch, and Virginia Tech's CAD Laboratory agreed, through the assistance of Americal Technology Initiative, in 1990 to form the ACSYNT (Aircraft Synthesis) Institute. The Institute is supported by a Joint Sponsored Research Agreement to continue the research and development in computer aided conceptual design of aircraft initiated by NASA Ames Research Center and Virginia Tech's CAD Laboratory. The result of this collaboration, a feature-based, parametric computer aided aircraft conceptual design code called ACSYNT, is described. The code is based on analysis routines begun at NASA Ames in the early 1970's. ACSYNT's CAD system is based entirely on the ISO standard Programmer's Hierarchical Interactive Graphics System and is graphics-device independent. The code includes a highly interactive graphical user interface, automatically generated Hermite and B-Spline surface models, and shaded image displays. Numerous features to enhance aircraft conceptual design are described.

  3. International regulations in capital standards in insurance companies and banking system of Serbia

    Directory of Open Access Journals (Sweden)

    Milić Dragana

    2014-01-01

    Full Text Available The emergence and expansion of the recent financial crisis has renewed the question of regulation and supervision of the financial system. Therefore, the question of managing financial risks is becoming increasingly popular and gaining more and more importance. Regulators have in recent years introduced capital standards based on specific sensitivity to risk. Based on defined issues, the starting point is the general hypothesis that the capital adequacy is a key base for measuring the resistance of the banking and insurance sector to market shocks. This paper will present the analytical, synthetic and general scientific methods. The comparative method is used in this paper to highlight the similarities and differences between Solvency II and Basel III and their operational efficiency.

  4. RDA: a standard for client server communication in a hospital information system.

    Science.gov (United States)

    Wentz, B; Bell, R K; Hefler, T; Kauer, T; Kreutzmeier, G; Seggewies, C; Seibold, H; Horbach, L

    1995-01-01

    The University of Erlangen-Nürnberg contains a large medical faculty with many hospitals, laboratories, and other departments distributed in the town of Erlangen, and it is necessary to exchange medical data between them. For example the basic patient data which are held on central computers, must be distributed to various stations and departments. In addition medical reports which are prepared on or generated by computers in central departments must be transmitted to various points in the hospitals [1]. When the network, based on ethernet cabling within the hospitals and a glass fiber backbone, has been completed, the Erlangen hospital communication system will support an electronic exchange of medical information. Two separate communication methods are used: data exchange via electronic mail according to the international standard X.400 and remote access to central databases using the software product NET-WORK.

  5. Towards a Standard for Provenance and Context for Preservation of Data for Earth System Science

    Science.gov (United States)

    Ramapriyan, H. K.; Moses, J. F.

    2011-12-01

    Long-term data sets with data from many missions are needed to study trends and validate model results that are typical in Earth System Science research. Data and derived products originate from multiple missions (spaceborne, airborne and/or in situ) and from multiple organizations. During the missions as well as well past their termination, it is essential to preserve the data and products to support future studies. Key aspects of preservation are: preserving bits and ensuring data are uncorrupted, preserving understandability with appropriate documentation, and preserving reproducibility of science with appropriate documentation and other artifacts. Computer technology provides adequate standards to ensure that, with proper engineering, bits are preserved as hardware evolves. However, to ensure understandability and reproducibility, it is essential to plan ahead to preserve all the relevant data and information. There are currently no standards to identify the content that needs to be preserved, leading to non-uniformity in content and users' not being sure of whether preserved content is comprehensive. Each project, program or agency can specify the items to be preserved as a part of its data management requirements. However, broader community consensus that cuts across organizational or national boundaries would be needed to ensure comprehensiveness, uniformity and long-term utility of archived data. The Federation of Earth Science Information Partners (ESIP), a diverse network of scientists, data stewards and technology developers, has a forum for ESIP members to collaborate on data preservation issues. During early 2011, members discussed the importance of developing a Provenance and Context Content Standard (PCCS) and developed an initial list of content items. This list is based on the outcome of a NASA and NOAA meeting held in 1998 under the auspices of the USGCRP, documentation requirements from NOAA and our experience with some of the NASA Earth science

  6. Phase II Study of Olaparib (AZD-2281) After Standard Systemic Therapies for Disseminated Colorectal Cancer.

    Science.gov (United States)

    Leichman, Lawrence; Groshen, Susan; O'Neil, Bert H; Messersmith, Wells; Berlin, Jordan; Chan, Emily; Leichman, Cynthia G; Cohen, Steven J; Cohen, Deirdre; Lenz, Heinz-Josef; Gold, Philip; Boman, Bruce; Fielding, Anitra; Locker, Gershon; Cason, Ronald C; Hamilton, Stan R; Hochster, Howard S

    2016-02-01

    Effective new agents for patients with colorectal cancer (CRC) with disease progression during standard therapy regimens are needed. We hypothesized that poly ADP ribose polymerase (PARP) inhibitor therapy in patients with CRC and inefficient tumor DNA repair mechanisms, such as those with high-level microsatellite instability (MSI-H), would result in synthetic lethality. This was an open-label phase II trial testing olaparib 400 mg p.o. b.i.d. for patients with disseminated, measurable CRC failing standard therapies with centrally confirmed tumor MSI status. The primary endpoint was the tumor response, assessed by RECIST, version 1.0. The secondary endpoints were safety/toxicity, progression-free survival (PFS), and overall survival (OS). Thirty-three patients (20 microsatellite stable [MSS], 13 MSI-H) were enrolled. The median age for all patients was 57 years and for MSS and MSI-H patients was 51 and 61 years, respectively. All patients received at least one 28-day cycle of olaparib. No patient had a complete or partial response. Nausea (48%), fatigue (36%), and vomiting (33%) were the most commonly reported treatment-related adverse events. The median PFS for all patients was 1.84 months. No statistically significant differences were found in the median PFS or OS for the MSS group compared with the MSI-H group. Single-agent olaparib delivered after failure of standard systemic therapy did not demonstrate activity for CRC patients, regardless of microsatellite status. Future trials, testing PARP inhibitors in patients with CRC should focus on the use of DNA-damaging chemotherapy and/or radiation therapy, combined with PARP inhibitors, remembering the toxicity reported in the present study. Microsatellite instability (MSI-H) colorectal tumors exhibit hypermethylation in tumor mismatch repair genes, or have mutations in one or more of these genes resulting from a germ-line defect (Lynch syndrome). PARP inhibitors such as olaparib are most effective in tumors

  7. Development of the standard classification system of technical information in the field of RI-biomics and its application to the web system

    International Nuclear Information System (INIS)

    Jang, Sol Ah; Kim, Joo Yeon; Park, Tai Jin

    2014-01-01

    RI-Biomics is a new concept that combines radioisotopes (RI) and Biomics. For efficient collection of information, establishment of database for technical information system and its application to the system, there is an increasing need for constructing the standard classification system of technical information by its systematical classification. In this paper, we have summarized the development process of the standard classification system of technical information in the field of RI-Biomics and its application to the system. Constructing the draft version for the standard classification system of technical information was based on that standard classification one in national science and technology in Korea. The final classification system was then derived through the reconstruction and the feedback process based on the consultation from the 7 experts. These results were applied to the database of technical information system after transforming as standard code. Thus, the standard classification system were composed of 5 large classifications and 20 small classifications, and those classification are expected to establish the foundation of information system by achieving the circular structure of collection-analysis-application of information

  8. Interactions of selected policy-stakeholder groups implementing middle school science standards-based systemic reform

    Science.gov (United States)

    Boydston, Theodore Lewis, III

    1999-12-01

    This research is an interpretive inquiry into the views and interactions of stakeholders in a district office of a large school system responsible for implementing science systemic reform. Three major sources of data were used in this research: surveys, stakeholder interviews, and autobiographical reflection on experiences as part of the reform initiative. This is an emergent research that is evident in the shift in the focus of research questions and their supporting assumptions during the research. The literature review describes standards-based reform, arguments about reform, and the major dimensions of reform research. The results of the survey of stakeholders revealed that the views among the stakeholder groups followed the system hierarchy and could be separated into two large groups; staff responsible for implementing the reform initiative and the other stakeholder groups. Each of these groups was composed of identifiable subgroups. The interviews with stakeholders revealed how their different attitudes, values, and beliefs frame the context of stakeholder interactions. An over reliance on an authoritarian view of decision-making leaves many stakeholders feeling disempowered and critical of others. This atmosphere promotes blaming, which inhibits collegial interaction. Work experiences in the district office revealed how stakeholders' unaddressed assumptions, attitudes, and beliefs promote fragmentation and competition rather than cooperation. Hidden assumptions about management by control and mandate, competition, and teaching and learning appear to restrain the interactions of stakeholders. Support of the National Science Education Standards was identified as a unifying view among the stakeholders, yet the professional development program focused on content and pedagogical knowledge without addressing stakeholder concerns and beliefs about the intended constructivist framework of the program. Stakeholders' attitudes about the issue of equity demonstrated

  9. The Drupal Environmental Information Management System Provides Standardization, Flexibility and a Platform for Collaboration

    Science.gov (United States)

    Gries, C.; Vanderbilt, K.; Reid, D.; Melendez-Colom, E.; San Gil, I.

    2013-12-01

    Over the last five years several Long-Term Ecological Research (LTER) sites have collaboratively developed a standardized yet flexible approach to ecological information management based on the open source Drupal content management system. These LTER sites adopted a common data model for basic metadata necessary to describe data sets, but also used for site management and web presence. Drupal core functionality provides web forms for easy management of information stored in this data model. Custom Drupal extensions were developed to generate XML files conforming to the Ecological Metadata Language (EML) for contribution to the LTER Network Information System (NIS) and other data archives. Each LTER site then took advantage of the flexibility Drupal provides to develop its unique web presence, choosing different themes and adding additional content to the websites. By nature, information presented is highly interlinked which can easily be modeled in Drupal entities and is further supported by a sophisticated tagging system (Fig. 1). Therefore, it is possible to provide the visitor with many different entry points to the site specific information presented. For example, publications and datasets may be grouped for each scientist, for each research project, for each major research theme at the site, making the information presented more accessible for different visitors. Experience gained during the early years was recently used to launch a complete re-write for upgrading to Drupal 7. LTER sites from multiple academic institutions pooled resources in order to partner with professional Drupal developers. Highlights of the new developments are streamlined data entry, improved EML output and integrity, support of IM workflows, a faceted data set search, a highly configurable data exploration tool with intelligent filtering and data download, and, for the mobile age, a responsive web design theme. Seven custom modules and a specific installation profile were developed

  10. A holistic strategy for quality and safety control of traditional Chinese medicines by the "iVarious" standard system.

    Science.gov (United States)

    Chen, Anzhen; Sun, Lei; Yuan, Hang; Wu, Aiying; Lu, Jingguang; Ma, Shuangcheng

    2017-10-01

    An effective quality control system is the key to ensuring the quality, safety and efficacy of traditional Chinese medicines (TCMs). However, the current quality standard research lacks the top-design and systematic design, mostly based on specific technologies or evaluation methods. To resolve the challenges and questions of quality control of TCMs, a brand-new quality standard system, named "iVarious", was proposed. The system comprises eight elements in a modular format. Meaning of every element was specifically illustrated via corresponding research instances. Furthermore, frankincense study was taken as an example for demonstrating standards and research process, based on the "iVarious" system. This system highlighted a holistic strategy for effectiveness, security, integrity and systematization of quality and safety control standards of TCMs. The establishment of "iVarious" integrates multi-disciplinary technologies and progressive methods, basis elements and key points of standard construction. The system provides a novel idea and technological demonstration for regulation establishment of TCMs quality standards.

  11. A holistic strategy for quality and safety control of traditional Chinese medicines by the “iVarious” standard system

    Directory of Open Access Journals (Sweden)

    Anzhen Chen

    2017-10-01

    Full Text Available An effective quality control system is the key to ensuring the quality, safety and efficacy of traditional Chinese medicines (TCMs. However, the current quality standard research lacks the top-design and systematic design, mostly based on specific technologies or evaluation methods. To resolve the challenges and questions of quality control of TCMs, a brand-new quality standard system, named “iVarious”, was proposed. The system comprises eight elements in a modular format. Meaning of every element was specifically illustrated via corresponding research instances. Furthermore, frankincense study was taken as an example for demonstrating standards and research process, based on the “iVarious” system. This system highlighted a holistic strategy for effectiveness, security, integrity and systematization of quality and safety control standards of TCMs. The establishment of “iVarious” integrates multi-disciplinary technologies and progressive methods, basis elements and key points of standard construction. The system provides a novel idea and technological demonstration for regulation establishment of TCMs quality standards.

  12. An integrated healthcare information system for end-to-end standardized exchange and homogeneous management of digital ECG formats.

    Science.gov (United States)

    Trigo, Jesús Daniel; Martínez, Ignacio; Alesanco, Alvaro; Kollmann, Alexander; Escayola, Javier; Hayn, Dieter; Schreier, Günter; García, José

    2012-07-01

    This paper investigates the application of the enterprise information system (EIS) paradigm to standardized cardiovascular condition monitoring. There are many specifications in cardiology, particularly in the ECG standardization arena. The existence of ECG formats, however, does not guarantee the implementation of homogeneous, standardized solutions for ECG management. In fact, hospital management services need to cope with various ECG formats and, moreover, several different visualization applications. This heterogeneity hampers the normalization of integrated, standardized healthcare information systems, hence the need for finding an appropriate combination of ECG formats and a suitable EIS-based software architecture that enables standardized exchange and homogeneous management of ECG formats. Determining such a combination is one objective of this paper. The second aim is to design and develop the integrated healthcare information system that satisfies the requirements posed by the previous determination. The ECG formats selected include ISO/IEEE11073, Standard Communications Protocol for Computer-Assisted Electrocardiography, and an ECG ontology. The EIS-enabling techniques and technologies selected include web services, simple object access protocol, extensible markup language, or business process execution language. Such a selection ensures the standardized exchange of ECGs within, or across, healthcare information systems while providing modularity and accessibility.

  13. Standardized assessment system in Chile: share of Mario Leyton Soto and Erika Himmel König

    Directory of Open Access Journals (Sweden)

    Jaime CAICEO ESCUDERO

    2016-10-01

    Full Text Available Educational evaluation, as the science of education, began to be developed and applied in Chile only starting from the sixties of the last century. Indeed, several Chilean educators were to his PhD to United States of America in these areas; among them are Mario Leyton and Erika Himmel, who specialized in curriculum and evaluation, through the approaches of Tyler and Bloom. Therefore, both were actively involved in the introduction into the country of two measurement systems: (1 selection for admission to the University, creating a standardized test, the academic aptitude test –paa– which was established from 1967 and remained until 2002 and from 2003 to date was changed to the university selection test –psu–; initially the paa contained only verbal and mathematical aptitude tests; knowledge tests were subsequently added specific (in mathematics, biology, physics, chemistry and Sciences social. (2 the measurement of achievements educational system school, both in basic education and medium from the 1970s with the called initially program of evaluation of educational achievement –per– and, subsequently, with the system of measurement of the quality of the teaching –simce–, which applies from 1988 until today, at the national level and at various levels of the school system: 4.° Basic, 8.° Basic and 2.° Medium, especially with tests of language and communication and mathematics. Both initiatives were directly involved Mario Leyton and Erika Himmel; the first to key positions in the Ministry of Education and the second as academic of the University of Chile and the Catholic University of Chile. Therefore, both have been recognized by the State with the National Prize of Sciences of Education in 2009 and 2011, respectively.

  14. Airside HVAC BESTEST: HVAC Air-Distribution System Model Test Cases for ASHRAE Standard 140

    Energy Technology Data Exchange (ETDEWEB)

    Judkoff, Ronald [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Neymark, Joel [J. Neymark & Associates; Kennedy, Mike D. [Mike D. Kennedy, Inc.; Gall, J. [AAON, Inc.; Henninger, R. [GARD Analytics, Inc.; Hong, T. [Lawrence Berkeley National Laboratory; Knebel, D. [AAON, Inc.; McDowell, T. [Thermal Energy System Specialists, LLC; Witte, M. [GARD Analytics, Inc.; Yan, D. [Tsinghua University; Zhou, X. [Tsinghua University

    2017-08-07

    This paper summarizes recent work to develop new airside HVAC equipment model analytical verification test cases for ANSI/ASHRAE Standard 140, Standard Method of Test for the Evaluation of Building Energy Analysis Computer Programs. The analytical verification test method allows comparison of simulation results from a wide variety of building energy simulation programs with quasi-analytical solutions, further described below. Standard 140 is widely cited for evaluating software for use with performance-path energy efficiency analysis, in conjunction with well-known energy-efficiency standards including ASHRAE Standard 90.1, the International Energy Conservation Code, and other international standards. Airside HVAC Equipment is a common area of modelling not previously explicitly tested by Standard 140. Integration of the completed test suite into Standard 140 is in progress.

  15. The Accounting Standardization System in Portugal and Its First-Time Adoption Effects in the Olive and Cork Tree Cultures

    Directory of Open Access Journals (Sweden)

    Jonas da Silva Oliveira

    2015-06-01

    Full Text Available This study examines the quantitative impact of the first-time adoption of the Portuguese Accounting Standardization System on individual annual reports of Portuguese unlisted companies in the cork and olive tree culture sector. Findings indicate that the items which showed significant changes in the transition from the previous accounting frame of reference to the Portuguese Accounting Standardization System are mainly those regarding to biological assets, inventories, liabilities, current ratio, and return on assets. The adoption of the Portuguese Accounting Standardization System has led generally to less conservative accounting practices, indicating that characteristics of code-law countries such as cultural aspects and country enforcement regimes did not influence the adoption of IAS/IFRS-based accounting standards by Portuguese unlisted companies in the cork and olive tree culture sectors.

  16. NextGen Technologies on the FAA's Standard Terminal Automation Replacement System

    Science.gov (United States)

    Witzberger, Kevin; Swenson, Harry; Martin, Lynne; Lin, Melody; Cheng, Jinn-Hwei

    2014-01-01

    This paper describes the integration, evaluation, and results from a high-fidelity human-in-the-loop (HITL) simulation of key NASA Air Traffic Management Technology Demonstration - 1 (ATD- 1) technologies implemented in an enhanced version of the FAA's Standard Terminal Automation Replacement System (STARS) platform. These ATD-1 technologies include: (1) a NASA enhanced version of the FAA's Time-Based Flow Management, (2) a NASA ground-based automation technology known as controller-managed spacing (CMS), and (3) a NASA advanced avionics airborne technology known as flight-deck interval management (FIM). These ATD-1 technologies have been extensively tested in large-scale HITL simulations using general-purpose workstations to study air transportation technologies. These general purpose workstations perform multiple functions and are collectively referred to as the Multi-Aircraft Control System (MACS). Researchers at NASA Ames Research Center and Raytheon collaborated to augment the STARS platform by including CMS and FIM advisory tools to validate the feasibility of integrating these automation enhancements into the current FAA automation infrastructure. NASA Ames acquired three STARS terminal controller workstations, and then integrated the ATD-1 technologies. HITL simulations were conducted to evaluate the ATD-1 technologies when using the STARS platform. These results were compared with the results obtained when the ATD-1 technologies were tested in the MACS environment. Results collected from the numerical data show acceptably minor differences, and, together with the subjective controller questionnaires showing a trend towards preferring STARS, validate the ATD-1/STARS integration.

  17. The family of standard hydrogen monitoring system computer software design description: Revision 2

    International Nuclear Information System (INIS)

    Bender, R.M.

    1994-01-01

    In March 1990, 23 waste tanks at the Hanford Nuclear Reservation were identified as having the potential for the buildup of gas to a flammable or explosive level. As a result of the potential for hydrogen gas buildup, a project was initiated to design a standard hydrogen monitoring system (SHMS) for use at any waste tank to analyze gas samples for hydrogen content. Since it was originally deployed three years ago, two variations of the original system have been developed: the SHMS-B and SHMS-C. All three are currently in operation at the tank farms and will be discussed in this document. To avoid confusion in this document, when a feature is common to all three of the SHMS variants, it will be referred to as ''The family of SHMS.'' When it is specific to only one or two, they will be identified. The purpose of this computer software design document is to provide the following: the computer software requirements specification that documents the essential requirements of the computer software and its external interfaces; the computer software design description; the computer software user documentation for using and maintaining the computer software and any dedicated hardware; and the requirements for computer software design verification and validation

  18. Management Control in Major Brazilian Multiple Banks: the Impact of Internationalization and Convergence of Accounting Standards on the Control Systems

    Directory of Open Access Journals (Sweden)

    João Carlos Damasceno Reis

    2014-08-01

    Full Text Available This study verifies the impact caused by the processes of globalization and convergence to international accounting standards on the managerial control systems of the largest multiple banks that operate in Brazil. The study was exploratory in nature, with the use of the case study method and the application of questionnaires containing mostly open questions to upper tier executives of four major Brazilian banks. The analysis showed that globalization has resulted in improved control systems and widespread use of information technology. It was also found that the convergence to international accounting standards occurred properly, thanks to the steps taken by the Central Bank that aimed at an agile updating of the Brazilian accounting standards laid down for banks operating in Brazil, in line with international standards. In general, the researched banks did not report a significant impact of convergence to the IFRS on their management control systems; adherence to the international accounting standards has had more significant impacts on information systems, especially regarding the new reporting and transparency standards, rather than on management controls. This result signals that the management control systems of the four banks in the sample are in line with Anthony (1965’s vision, that is, that flexibility to adapt to every change in the external environment might actually increase risks of failure.

  19. Development and Use of Engineering Standards for Computational Fluid Dynamics for Complex Aerospace Systems

    Science.gov (United States)

    Lee, Hyung B.; Ghia, Urmila; Bayyuk, Sami; Oberkampf, William L.; Roy, Christopher J.; Benek, John A.; Rumsey, Christopher L.; Powers, Joseph M.; Bush, Robert H.; Mani, Mortaza

    2016-01-01

    Computational fluid dynamics (CFD) and other advanced modeling and simulation (M&S) methods are increasingly relied on for predictive performance, reliability and safety of engineering systems. Analysts, designers, decision makers, and project managers, who must depend on simulation, need practical techniques and methods for assessing simulation credibility. The AIAA Guide for Verification and Validation of Computational Fluid Dynamics Simulations (AIAA G-077-1998 (2002)), originally published in 1998, was the first engineering standards document available to the engineering community for verification and validation (V&V) of simulations. Much progress has been made in these areas since 1998. The AIAA Committee on Standards for CFD is currently updating this Guide to incorporate in it the important developments that have taken place in V&V concepts, methods, and practices, particularly with regard to the broader context of predictive capability and uncertainty quantification (UQ) methods and approaches. This paper will provide an overview of the changes and extensions currently underway to update the AIAA Guide. Specifically, a framework for predictive capability will be described for incorporating a wide range of error and uncertainty sources identified during the modeling, verification, and validation processes, with the goal of estimating the total prediction uncertainty of the simulation. The Guide's goal is to provide a foundation for understanding and addressing major issues and concepts in predictive CFD. However, this Guide will not recommend specific approaches in these areas as the field is rapidly evolving. It is hoped that the guidelines provided in this paper, and explained in more detail in the Guide, will aid in the research, development, and use of CFD in engineering decision-making.

  20. Migration path for structured documentation systems including standardized medical device data.

    Science.gov (United States)

    Kock, Ann-Kristin; Ingenerf, Josef; Halkaliev, Stoyan; Handels, Heinz

    2012-01-01

    A standardized end-to-end solution has been implemented with the aim of supporting the semantic integration of clinical content in institution spanning applications. The approach outlined is a proof-of-concept design. It has shown that the standards chosen are suitable to integrate device data into forms, to document the results consistently and finally enable semantic interoperability. In detail the implementation includes a standardized device interface, a standardized representation of data entry forms and enables the communication of structured data via HL7 CDA. Because the proposed method applies a combination of standards semantic interoperability and the possibility of a contextual interpretation at each stage can be ensured.

  1. Application of the British Food Standards Agency nutrient profiling system in a French food composition database.

    Science.gov (United States)

    Julia, Chantal; Kesse-Guyot, Emmanuelle; Touvier, Mathilde; Méjean, Caroline; Fezeu, Léopold; Hercberg, Serge

    2014-11-28

    Nutrient profiling systems are powerful tools for public health initiatives, as they aim at categorising foods according to their nutritional quality. The British Food Standards Agency (FSA) nutrient profiling system (FSA score) has been validated in a British food database, but the application of the model in other contexts has not yet been evaluated. The objective of the present study was to assess the application of the British FSA score in a French food composition database. Foods from the French NutriNet-Santé study food composition table were categorised according to their FSA score using the Office of Communication (OfCom) cut-off value ('healthier' ≤ 4 for foods and ≤ 1 for beverages; 'less healthy' >4 for foods and >1 for beverages) and distribution cut-offs (quintiles for foods, quartiles for beverages). Foods were also categorised according to the food groups used for the French Programme National Nutrition Santé (PNNS) recommendations. Foods were weighted according to their relative consumption in a sample drawn from the NutriNet-Santé study (n 4225), representative of the French population. Classification of foods according to the OfCom cut-offs was consistent with food groups described in the PNNS: 97·8 % of fruit and vegetables, 90·4 % of cereals and potatoes and only 3·8 % of sugary snacks were considered as 'healthier'. Moreover, variability in the FSA score allowed for a discrimination between subcategories in the same food group, confirming the possibility of using the FSA score as a multiple category system, for example as a basis for front-of-pack nutrition labelling. Application of the FSA score in the French context would adequately complement current public health recommendations.

  2. Critical features of an auditable management system for an ISO 9000-compatible occupational health and safety standard.

    Science.gov (United States)

    Levine, S; Dyjack, D T

    1997-04-01

    An International Organization for Standardization (ISO) 9001: 1994-harmonized occupational health and safety (OHS) management system has been written at the University of Michigan, and reviewed, revised, and accepted under the direction of the American Industrial Hygiene Association (AIHA) Occupational Health and Safety Management Systems (OHSMS) Task Force and the Board of Directors. This system is easily adaptable to the ISO 14001 format and to both OHS and environmental management system applications. As was the case with ISO 9001: 1994, this system is expected to be compatible with current production quality and OHS quality systems and standards, have forward compatibility for new applications, and forward flexibility, with new features added as needed. Since ISO 9001: 1987 and 9001: 1994 have been applied worldwide, the incorporation of harmonized OHS and environmental management system components should be acceptable to business units already performing first-party (self-) auditing, and second-party (contract qualification) auditing. This article explains the basis of this OHS management system, its relationship to ISO 9001 and 14001 standards, the philosophy and methodology of an ISO-harmonized system audit, the relationship of these systems to traditional OHS audit systems, and the authors' vision of the future for application of such systems.

  3. Adaptable Energy Systems Integration by Modular, Standardized and Scalable System Architectures: Necessities and Prospects of Any Time Transition

    Directory of Open Access Journals (Sweden)

    Jonas Hinker

    2018-03-01

    Full Text Available Energy conversion and distribution of heat and electricity is characterized by long planning horizons, investment periods and depreciation times, and it is thus difficult to plan and tell the technology that optimally fits for decades. Uncertainties include future energy prices, applicable subsidies, regulation, and even the evolution of market designs. To achieve higher adaptability to arbitrary transition paths, a technical concept based on integrated energy systems is envisioned and described. The problem of intermediate steps of evolution is tackled by introducing a novel paradigm in urban infrastructure design. It builds on standardization, modularization and economies of scale for underlying conversion units. Building on conceptual arguments for such a platform, it is then argued how actors like (among others municipalities and district heating system operators can use this as a practical starting point for a manageable and smooth transition towards more environmental friendly supply technologies, and to commit to their own pace of transition (bearable investment/risk. Merits are not only supported by technical arguments but also by strategical and societal prospects like technology neutrality and availability of real options.

  4. A Standard-Driven Data Dictionary for Data Harmonization of Heterogeneous Datasets in Urban Geological Information Systems

    Science.gov (United States)

    Liu, G.; Wu, C.; Li, X.; Song, P.

    2013-12-01

    The 3D urban geological information system has been a major part of the national urban geological survey project of China Geological Survey in recent years. Large amount of multi-source and multi-subject data are to be stored in the urban geological databases. There are various models and vocabularies drafted and applied by industrial companies in urban geological data. The issues such as duplicate and ambiguous definition of terms and different coding structure increase the difficulty of information sharing and data integration. To solve this problem, we proposed a national standard-driven information classification and coding method to effectively store and integrate urban geological data, and we applied the data dictionary technology to achieve structural and standard data storage. The overall purpose of this work is to set up a common data platform to provide information sharing service. Research progresses are as follows: (1) A unified classification and coding method for multi-source data based on national standards. Underlying national standards include GB 9649-88 for geology and GB/T 13923-2006 for geography. Current industrial models are compared with national standards to build a mapping table. The attributes of various urban geological data entity models are reduced to several categories according to their application phases and domains. Then a logical data model is set up as a standard format to design data file structures for a relational database. (2) A multi-level data dictionary for data standardization constraint. Three levels of data dictionary are designed: model data dictionary is used to manage system database files and enhance maintenance of the whole database system; attribute dictionary organizes fields used in database tables; term and code dictionary is applied to provide a standard for urban information system by adopting appropriate classification and coding methods; comprehensive data dictionary manages system operation and security. (3

  5. Corporate environmental information systems (CEIS). Standards und structural principles; Betriebliche Umweltinformationssysteme (BUIS). Anforderungen und struktureller Aufbau

    Energy Technology Data Exchange (ETDEWEB)

    Pflaum, H.; Guderian, J.; Kuemmel, R. [UMSICHT, Inst. fuer Umwelt-, Sicherheits- und Energietechnik e.V., Oberhausen (Germany)

    1997-09-01

    Appropriate organization structures, environmental controlling systems, and corporate environmental information systems (CEIS) are generally considered to be the essential instruments of a modern environmental management. Frequently, acceptance problems have been observed with respect to the installation of a CEIS due to the facts that there are no legal demands to implement such a system and, on the other hand, that theoretically based definitions of standards and structural principles of an CEIS are not yet available. As a consequence, different isolated solutions with rather low efficiency were hurriedly implemented by various companies. Regarding more precise request profiles for CEI systems, the present paper deals with the structural environment and the priority targets of an enterprise and with the organizational integration of environmental tasks. The operationalization into typical function fields yields tools to derive rough enterprise models, to analyze information streams and to select environmentally relevant information as well as the routes which they tend to go. Based on these fundamental instruments, a CEIS architecture (structure and organization) can be developed whose realization is eventually supported by a ten-step plan. Existing EDP solutions are deliberately excluded in order to verify the general validity of the system architecture and to encourage creative potentials. The CEIS concept presented here, however, requires a transformation into operative practice, i.e. adjustment, completion, and combination of the elements concerning the detailed conditions of the enterprise under study. (orig.) [Deutsch] Als wesentliche Instrumente modernen Umweltmanagements werden gemeinhin eine entsprechend ausgerichtete Organisationsstruktur, ein Umweltcontrollingsystem (UCS) und ein betriebliches Umweltinformationssystem (BUIS) angesehen. Die Einfuehrung eines BUIS in Industrieunternehmen stoesst aber erfahrungsgemaess auf Akzeptanzschwierigkeiten. Dies

  6. Fuel and Electrical Systems Mechanic. Apprenticeship Training Standards = Mecanicien de systemes d'alimentation en carburant et electriques. Normes de formation en apprentissage.

    Science.gov (United States)

    Ontario Ministry of Skills Development, Toronto.

    These training standards for fuel and electrical systems mechanics are intended to be used by apprentice/trainees, instructors, and companies in Ontario, Canada, as a blueprint for training or as a prerequisite for prerequisite for accreditation/certification. The training standards identify skills required for this occupation and its related…

  7. 77 FR 5616 - Proposed Technical Standard Order (TSO)-C151c, Terrain Awareness and Warning System (TAWS)

    Science.gov (United States)

    2012-02-03

    ... (TSO)-C151c, Terrain Awareness and Warning System (TAWS) ACTION: Notice of availability and request for... second draft of Technical Standard Order (TSO)- C151c, Terrain Awareness and Warning System. Comments.... b. Addition of Localizer Performance with Vertical guidance (LPV) and Global Navigation Satellite...

  8. Development and validation of a portable gas phase standard generation and calibration system for volatile organic compounds

    Science.gov (United States)

    P. Veres; J. B. Gilman; J. M. Roberts; W. C. Kuster; C. Warneke; I. R. Burling; J. de Gouw

    2010-01-01

    We report on the development of an accurate, portable, dynamic calibration system for volatile organic compounds (VOCs). The Mobile Organic Carbon Calibration System (MOCCS) combines the production of gas-phase VOC standards using permeation or diffusion sources with quantitative total organic carbon (TOC) conversion on a palladium surface to CO2 in the presence of...

  9. 40 CFR 63.443 - Standards for the pulping system at kraft, soda, and semi-chemical processes.

    Science.gov (United States)

    2010-07-01

    ... Paper Industry § 63.443 Standards for the pulping system at kraft, soda, and semi-chemical processes. (a... operator of each pulping system using a semi-chemical or soda process subject to the requirements of this... kraft, soda, and semi-chemical processes. 63.443 Section 63.443 Protection of Environment ENVIRONMENTAL...

  10. The DST method for solar domestic hot water systems - Research and development for ISO and CEN standards

    NARCIS (Netherlands)

    Visser, H.; Ree, B.G.C. van der

    1996-01-01

    The Dynamic System Test (DST) method for performance characterization of solar domestic hot water (SDHW) systems has been the subject of international research for a number of years. At present, several countries are using the method and it is being standardized on international and European levels.

  11. An automated LS(β)- NaI(Tl)(γ) coincidence system as absolute standard for radioactivity measurements.

    Science.gov (United States)

    Joseph, Leena; Das, A P; Ravindra, Anuradha; Kulkarni, D B; Kulkarni, M S

    2018-03-06

    4πβ-γ coincidence method is a powerful and widely used method to determine the absolute activity concentration of radioactive solutions. A new automated liquid scintillator based coincidence system has been designed, developed, tested and established as absolute standard for radioactivity measurements. The automation is achieved using PLC (programmable logic controller) and SCADA (supervisory control and data acquisition). Radioactive solution of 60 Co was standardized to compare the performance of the automated system with proportional counter based absolute standard maintained in the laboratory. The activity concentrations determined using these two systems were in very good agreement; the new automated system can be used for absolute measurement of activity concentration of radioactive solutions. Copyright © 2018. Published by Elsevier Ltd.

  12. The standard-based open workflow system in GeoBrain (Invited)

    Science.gov (United States)

    Di, L.; Yu, G.; Zhao, P.; Deng, M.

    2013-12-01

    GeoBrain is an Earth science Web-service system developed and operated by the Center for Spatial Information Science and Systems, George Mason University. In GeoBrain, a standard-based open workflow system has been implemented to accommodate the automated processing of geospatial data through a set of complex geo-processing functions for advanced production generation. The GeoBrain models the complex geoprocessing at two levels, the conceptual and concrete. At the conceptual level, the workflows exist in the form of data and service types defined by ontologies. The workflows at conceptual level are called geo-processing models and cataloged in GeoBrain as virtual product types. A conceptual workflow is instantiated into a concrete, executable workflow when a user requests a product that matches a virtual product type. Both conceptual and concrete workflows are encoded in Business Process Execution Language (BPEL). A BPEL workflow engine, called BPELPower, has been implemented to execute the workflow for the product generation. A provenance capturing service has been implemented to generate the ISO 19115-compliant complete product provenance metadata before and after the workflow execution. The generation of provenance metadata before the workflow execution allows users to examine the usability of the final product before the lengthy and expensive execution takes place. The three modes of workflow executions defined in the ISO 19119, transparent, translucent, and opaque, are available in GeoBrain. A geoprocessing modeling portal has been developed to allow domain experts to develop geoprocessing models at the type level with the support of both data and service/processing ontologies. The geoprocessing models capture the knowledge of the domain experts and are become the operational offering of the products after a proper peer review of models is conducted. An automated workflow composition has been experimented successfully based on ontologies and artificial

  13. A multi-standard active-RC filter with accurate tuning system

    International Nuclear Information System (INIS)

    Ma Heping; Yuan Fang; Shi Yin; Dai, F F

    2009-01-01

    A low-power, highly linear, multi-standard, active-RC filter with an accurate and novel tuning architecture is presented. It exhibits IEEE 802.11 a/b/g (9.5 MHz) and DVB-H (3 MHz, 4 MHz) application. The filter exploits digitally-controlled polysilicon resistor banks and a phase lock loop type automatic tuning system. The novel and complex automatic frequency calibration scheme provides better than 4 corner frequency accuracy, and it can be powered down after calibration to save power and avoid digital signal interference. The filter achieves OIP3 of 26 dBm and the measured group delay variation of the receiver filter is 50 ns (WLAN mode). Its dissipation is 3.4 mA in RX mode and 2.3 mA (only for one path) in TX mode from a 2.85 V supply. The dissipation of calibration consumes 2 mA. The circuit has been fabricated in a 0.35 μm 47 GHz SiGe BiCMOS technology; the receiver and transmitter filter occupy 0.21 mm 2 and 0.11 mm 2 (calibration circuit excluded), respectively.

  14. Electron energy-loss spectroscopy of coupled plasmonic systems: beyond the standard electron perspective

    Science.gov (United States)

    Bernasconi, G. D.; Flauraud, V.; Alexander, D. T. L.; Brugger, J.; Martin, O. J. F.; Butet, J.

    2016-09-01

    Electron energy-loss spectroscopy (EELS) has become an experimental method of choice for the investigation of localized surface plasmon resonances, allowing the simultaneous mapping of the associated field distributions and their resonant energies with a nanoscale spatial resolution. The experimental observations have been well-supported by numerical models based on the computation of the Lorentz force acting on the impinging electrons by the scattered field. However, in this framework, the influence of the intrinsic properties of the plasmonic nanostructures studied with the electron energy-loss (EEL) measurements is somehow hidden in the global response. To overcome this limitation, we propose to go beyond this standard, and well-established, electron perspective and instead to interpret the EELS data using directly the intrinsic properties of the nanostructures, without regard to the force acting on the electron. The proposed method is particularly well-suited for the description of coupled plasmonic systems, because the role played by each individual nanoparticle in the observed EEL spectrum can be clearly disentangled, enabling a more subtle understanding of the underlying physical processes. As examples, we consider different plasmonic geometries in order to emphasize the benefits of this new conceptual approach for interpreting experimental EELS data. In particular, we use it to describe results from samples made by traditional thin film patterning and by arranging colloidal nanostructures.

  15. Standard Practice for Use of a Lif Photo-Fluorescent Film Dosimetry System

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2003-01-01

    1.1 This practice covers the handling, testing, and procedure for using a lithium fluoride (LiF)-based photo-fluorescent film dosimetry system to measure absorbed dose (relative to water) in materials irradiated by photons or electrons. Other alkali halides that may also exhibit photofluorescence (for example, NaCl, NaF, and KCl) are not covered in this practice. Although various alkali halides have been used for dosimetry for years utilizing thermoluminescence, the use of photoluminescence is relatively new. 1.2 This practice applies to photo-fluorescent film dosimeters (referred hereafter as photo-fluorescent dosimeters) that can be used within part or all of the following ranges: 1.2.1 Absorbed dose range of 5 10-2 to 3 102 kGy (1-3). 1.2.2 Absorbed dose rate range of 0.3 to 2 10 4 Gy/s (2-5)). 1.2.3 Radiation energy range for photons of 0.05 to 10 MeV (2). 1.2.4 Radiation energy range for electrons of 0.1 to 10 MeV (2). 1.2.5 Radiation temperature range of -20 to +60°C (6,7). 1.3 This standard doe...

  16. Standard practice for verification of constant amplitude dynamic forces in an axial fatigue testing system

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2008-01-01

    1.1 This practice covers procedures for the dynamic verification of cyclic force amplitude control or measurement accuracy during constant amplitude testing in an axial fatigue testing system. It is based on the premise that force verification can be done with the use of a strain gaged elastic element. Use of this practice gives assurance that the accuracies of forces applied by the machine or dynamic force readings from the test machine, at the time of the test, after any user applied correction factors, fall within the limits recommended in Section 9. It does not address static accuracy which must first be addressed using Practices E 4 or equivalent. 1.2 Verification is specific to a particular test machine configuration and specimen. This standard is recommended to be used for each configuration of testing machine and specimen. Where dynamic correction factors are to be applied to test machine force readings in order to meet the accuracy recommended in Section 9, the verification is also specific to the c...

  17. Ranking system for national regulatory jurisdictions based on pesticide standard values in major exposures

    Directory of Open Access Journals (Sweden)

    Zijian Li

    2017-07-01

    Full Text Available To control the risk of human exposure to pesticides, about 50 nations have promulgated pesticide soil regulatory guidance values (RGVs, and 104 nations have provided pesticide drinking water maximum concentration levels (MCLs. In addition, 90 nations have regulated pesticide agricultural commodity maximum residue limits (MRLs. Pesticide standard values (PSVs for one single pesticide varied in a range of six, seven, or even eight orders of magnitude. Some PSVs are too large to prevent the impact of pesticides on human health. Many nations have not provided PSVs for some commonly used pesticides until now. This research has introduced several completeness values and numerical values methods to evaluate the national jurisdiction’s performance on PSVs on a nation base. The national jurisdiction ranking system developed by these methods will be beneficial to the environmental regulation makers in the management of PSVs. Results also indicate that European countries perform better in the regulation of pesticide soil RGVs, drinking water MCLs, and agricultural commodity MRLs.

  18. Remapping of digital subtraction angiography on a standard fluoroscopy system using 2D-3D registration

    Science.gov (United States)

    Alhrishy, Mazen G.; Varnavas, Andreas; Guyot, Alexis; Carrell, Tom; King, Andrew; Penney, Graeme

    2015-03-01

    Fluoroscopy-guided endovascular interventions are being performing for more and more complex cases with longer screening times. However, X-ray is much better at visualizing interventional devices and dense structures compared to vasculature. To visualise vasculature, angiography screening is essential but requires the use of iodinated contrast medium (ICM) which is nephrotoxic. Acute kidney injury is the main life-threatening complication of ICM. Digital subtraction angiography (DSA) is also often a major contributor to overall patient radiation dose (81% reported). Furthermore, a DSA image is only valid for the current interventional view and not the new view once the C-arm is moved. In this paper, we propose the use of 2D-3D image registration between intraoperative images and the preoperative CT volume to facilitate DSA remapping using a standard fluoroscopy system. This allows repeated ICM-free DSA and has the potential to enable a reduction in ICM usage and radiation dose. Experiments were carried out using 9 clinical datasets. In total, 41 DSA images were remapped. For each dataset, the maximum and averaged remapping accuracy error were calculated and presented. Numerical results showed an overall averaged error of 2.50 mm, with 7 patients scoring averaged errors < 3 mm and 2 patients < 6 mm.

  19. Generation and Standardized, Systemic Phenotypic Analysis of Pou3f3L423P Mutant Mice.

    Directory of Open Access Journals (Sweden)

    Sudhir Kumar

    Full Text Available Increased levels of blood plasma urea were used as phenotypic parameter for establishing novel mouse models for kidney diseases on the genetic background of C3H inbred mice in the phenotype-driven Munich ENU mouse mutagenesis project. The phenotypically recessive mutant line HST011 was established and further analyzed. The causative mutation was detected in the POU domain, class 3 transcription factor 3 (Pou3f3 gene, which leads to the amino acid exchange Pou3f3L423P thereby affecting the conserved homeobox domain of the protein. Pou3f3 homozygous knockout mice are published and show perinatal death. Line Pou3f3L423P is a viable mouse model harboring a homozygous Pou3f3 mutation. Standardized, systemic phenotypic analysis of homozygous mutants was carried out in the German Mouse Clinic. Main phenotypic changes were low body weight and a state of low energy stores, kidney dysfunction and secondary effects thereof including low bone mineralization, multiple behavioral and neurological defects including locomotor, vestibular, auditory and nociceptive impairments, as well as multiple subtle changes in immunological parameters. Genome-wide transcriptome profiling analysis of kidney and brain of Pou3f3L423P homozygous mutants identified significantly regulated genes as compared to wild-type controls.

  20. Standardization of the WPS and Development of the Welding Process Management System for Nuclear Power Plants

    International Nuclear Information System (INIS)

    Cho, Hong Seok; Lee, Jang Wook; Cho, Ki Hyun; Choi, Sang Hoon

    2010-01-01

    The purpose of this study is to integrate existing WPS(welding procedure specification) and PQR(procedure qualification records) which are kept by every branch office respectively and to develop a specialized program that will assist in the creation of WPS and PQR in accordance with the ASME Sec. IX, III, B31.1, etc. These research results make possible not only to ensure structural integrity by applying WPS and PQR correctly but also to cut down on expenses by managing the welding process efficiently. Moreover, as the specialized program will be linked with ERP system between KHNP and KPS, an administration action of welding process will be dealt with on-line. The backgrounds of this study are as follows; · Need to apply WPS correctly and promptly · Need to cut down on expenses due to overlapping development WPS · Need to manage welding resources efficiently · Need to standardize welding QA(quality assurance) documents · Need to improve efficiency of administrative welding process