WorldWideScience

Sample records for standard core lists

  1. Core labour standards and exports

    OpenAIRE

    Siroën, Jean-Marc

    2017-01-01

    (english) Core labour standards defined by the ILO in 1998 are universal, but applied very differently across countries. Compliance is much higher in high income countries. However, the causality between improved labour standards and economic growth remains a controversial issue. Export-led growth strategies might encourage developing countries to curb the process of standards improvement. In this way, they can raise the volume of their unskilled labour endowments (child and/or forced labour)...

  2. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This technical standards list (TSL) was prepared for use by personnel involved in the selection and use of US DOE technical standards and other government and non-government standards. This TSL provides listings of current DOE technical standards, non-government standards that have been adopted by DOE, other government documents in which DOE has a recorded interest, and cancelled DOE technical standards. Standards are indexed by type in the appendices to this document. Definitions of and general guidance for the use of standards are also provided.

  3. DOE technical standards list: Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    This Department of Energy (DOE) technical standards list (TSL) has been prepared by the Office of Nuclear Safety Policy and Standards (EH-31) on the basis of currently available technical information. Periodic updates of this TSL will be issued as additional information is received on standardization documents being issued, adopted, or canceled by DOE. This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listings of current DOE technical standards, non-Government standards that have been adopted by DOE, other standards-related documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  4. DOE technical standards list. Department of Energy standards index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This document was prepared for use by personnel involved in the selection and use of DOE technical standards and other Government and non-Government standards. This TSL provides listing of current DOE technical standards, non-Government standards that have been adopted by DOE, other Government documents in which DOE has a recorded interest, and canceled DOE technical standards. Information on new DOE technical standards projects, technical standards released for coordination, recently published DOE technical standards, and activities of non-Government standards bodies that may be of interest to DOE is published monthly in Standards Actions.

  5. Core List of Astronomy and Physics Journals

    Science.gov (United States)

    Bryson, Liz; Fortner, Diane; Yorks, Pamela

    This is a list of highly-used and highly-cited physics and astronomy journals. "Use" is measured largely on paper-journal counts from selective academic research-level libraries. Citation count titles are drawn from Institute for Scientific Information (ISI) data. Recognition is given to entrepreneurial electronic-only or new-style electronic journals. Selective news, magazine, and general science journals are omitted. The compilers welcome questions, suggestions for additions, or other advice. Comments may be sent c/o Diane Fortner, Physics Library, University of California, Berkeley. Dfortner@library.berkeley.edu

  6. Voter Perceptions: Common Core State Standards & Tests

    Science.gov (United States)

    Achieve, Inc., 2014

    2014-01-01

    Since June 2010, 46 states and Washington DC have adopted the Common Core State Standards (CCSS)--K-12 standards in mathematics and English language arts/literacy developed through a multi-state initiative led by the National Governors Association and the Council of Chief State School Officers. Implementation of the standards is underway in all of…

  7. Modeling in the Common Core State Standards

    Science.gov (United States)

    Tam, Kai Chung

    2011-01-01

    The inclusion of modeling and applications into the mathematics curriculum has proven to be a challenging task over the last fifty years. The Common Core State Standards (CCSS) has made mathematical modeling both one of its Standards for Mathematical Practice and one of its Conceptual Categories. This article discusses the need for mathematical…

  8. Translating the Common Core State Standards

    Science.gov (United States)

    Tienken, Christopher H.; Orlich, Donald C.

    2013-01-01

    As the authors describe in Chapter 7 of their new book, "The School Reform Landscape: Fraud, Myth, and Lies," the Common Core State Standards (CCSS) initiative continues to ramble on, without evidence to support its efficacy. That is because education reform in the United States is being driven largely by ideology, rhetoric, and dogma instead of…

  9. Making It Happen: Common Core Standards

    Science.gov (United States)

    National Council of Teachers of Mathematics, 2011

    2011-01-01

    This one-of-a-kind guide identifies and highlights the ways in which NCTM (National Council of Teachers of Mathematics) resources can support teachers as they implement and supplement the Common Core State Standards for Mathematics (CCSSM) in their states. The guide and accompanying charts are tools to help educators as they continue to make…

  10. Listings.

    Science.gov (United States)

    1994-12-07

    Nursing Standard regrets that it is no longer able to take listings over the telephone because of unprecedented demand. Readers are reminded that the listings section is for the use of charitable and professional organisations, unions and health authorities to publicise forthcoming events. Listings should contain all relevant details and be posted or faxed to Susan Blood-worth, Nursing Standard, Viking House, 17-19 Peterborough Road, Harrotc. Middlesex HA 1 2AX. Fax: 081-423 3867.

  11. Methods for the Compilation of a Core List of Journals in Toxicology.

    Science.gov (United States)

    Kuch, T. D. C.

    Previously reported methods for the compilation of core lists of journals in multidisciplinary areas are first examined, with toxicology used as an example of such an area. Three approaches to the compilation of a core list of journals in toxicology were undertaken and the results analyzed with the aid of models. Analysis of the results of the…

  12. 76 FR 18966 - Listing Standards for Compensation Committees

    Science.gov (United States)

    2011-04-06

    ... director. For this purpose, remuneration includes any payment in exchange for goods or services. Section... the board of directors and to be ``independent,'' as defined in the listing standards of the exchanges... requirements for members of the compensation committee of the board of directors of an issuer. In accordance...

  13. Advocacy: Emphasizing the Uncommon about the Common Core State Standards

    Science.gov (United States)

    Kaplan, Sandra N.

    2014-01-01

    The author describes key issues and uncommon concerns about the Common Core State Standards that fit within two categories: philosophical and pedagogical. Philosophically, Common Core State K-12 Standards should not be expected to be mastered at a specific grade level but based on developmental readiness. Pedagogically, Common Core State Standards…

  14. Rethinking the core list of journals for libraries that serve schools and colleges of pharmacy.

    Science.gov (United States)

    Beckett, Robert D; Cole, Sabrina W; Rogers, Hannah K; Bickett, Skye; Seeger, Christina; McDaniel, Jennifer A

    2014-10-01

    The Core List of Journals for Libraries that Serve Schools and Colleges of Pharmacy is a guide for developing and maintaining pharmacy-affiliated library collections. A work group was created to update the list and design a process for updating that will streamline future revisions. Work group members searched the National Library of Medicine catalog for an initial list of journals and then applied inclusion criteria to narrow the list. The work group finalized the fifth edition of the list with 225 diverse publications and produced a sustainable set of criteria for journal inclusion, providing a structured, objective process for future updates.

  15. Rethinking the Core List of Journals for Libraries that Serve Schools and Colleges of Pharmacy

    Science.gov (United States)

    Beckett, Robert D.; Rogers, Hannah K.; Bickett, Skye; Seeger, Christina; McDaniel, Jennifer A.

    2014-01-01

    The Core List of Journals for Libraries that Serve Schools and Colleges of Pharmacy is a guide for developing and maintaining pharmacy-affiliated library collections. A work group was created to update the list and design a process for updating that will streamline future revisions. Work group members searched the National Library of Medicine catalog for an initial list of journals and then applied inclusion criteria to narrow the list. The work group finalized the fifth edition of the list with 225 diverse publications and produced a sustainable set of criteria for journal inclusion, providing a structured, objective process for future updates. PMID:25349548

  16. Using Digital Video Production to Meet the Common Core Standards

    Science.gov (United States)

    Nichols, Maura

    2012-01-01

    The implementation of the Common Core Standards has just begun and these standards will impact a generation that communicates with technology more than anything else. Texting, cell phones, Facebook, YouTube, Skype, etc. are the ways they speak with their friends and the world. The Common Core Standards recognize this. According to the Common Core…

  17. Common Core Science Standards: Implications for Students with Learning Disabilities

    Science.gov (United States)

    Scruggs, Thomas E.; Brigham, Frederick J.; Mastropieri, Margo A.

    2013-01-01

    The Common Core Science Standards represent a new effort to increase science learning for all students. These standards include a focus on English and language arts aspects of science learning, and three dimensions of science standards, including practices of science, crosscutting concepts of science, and disciplinary core ideas in the various…

  18. A Computer-Aided Bibliometrics System for Journal Citation Analysis and Departmental Core Journal Ranking List Generation

    Directory of Open Access Journals (Sweden)

    Yih-Chearng Shiue

    2004-12-01

    Full Text Available Due to the tremendous increase and variation in serial publications, faculties in department of university are finding it difficult to generate and update their departmental core journal list regularly and accurately, and libraries are finding it difficult to maintain their current serial collection for different departments. Therefore, the evaluation of a departmental core journal list is an important task for departmental faculties and librarians. A departmental core journal list not only helps departments understand research performances of faculties and students, but also helps librarians make decisions about which journals to retain and which to cancel. In this study, a Computer-Aided Bibliometrics System was implemented and two methodologies (JCDF and LibJF were proposed in order to generate a departmental core journal ranking list and make the journal citation analysis. Six departments were taken as examples, with MIS as the major one. One journal citation pattern was found and the ratio of Turning point-to-No. journal was always around 0.07 among the 10 journals and 6 departments. After comparing with four methodologies via overlapping rate and standard deviation distances, the two proposed methodologies were shown to be better than questionnaire and library subscription method.

  19. 78 FR 63375 - List of Approved Spent Fuel Storage Casks: Transnuclear, Inc. Standardized NUHOMS® Cask System

    Science.gov (United States)

    2013-10-24

    ... Fuel Storage Casks: Transnuclear, Inc. Standardized NUHOMS[supreg] Cask System AGENCY: Nuclear...] Cask System listing within the ``List of Approved Spent Fuel Storage Casks'' to include Amendment No..., Inc. Standardized NUHOMS[supreg] Cask System listing within the ``List of Approved Spent Fuel Storage...

  20. Common Core Standards and their Impact on Standardized Test Design

    NARCIS (Netherlands)

    Polleck, J.N.; Jeffery, J.V.

    2017-01-01

    With adoption of the Common Core (CCSS) in a majority of U.S. states came developmentof new high-stakes exams. Though researchers have investigated CCSS andrelated policies, less attention has been directed toward understanding how standardsare translated into testing. Due to the influence that

  1. Darwin Core: An Evolving Community-Developed Biodiversity Data Standard

    Science.gov (United States)

    Wieczorek, John; Bloom, David; Guralnick, Robert; Blum, Stan; Döring, Markus; Giovanni, Renato; Robertson, Tim; Vieglais, David

    2012-01-01

    Biodiversity data derive from myriad sources stored in various formats on many distinct hardware and software platforms. An essential step towards understanding global patterns of biodiversity is to provide a standardized view of these heterogeneous data sources to improve interoperability. Fundamental to this advance are definitions of common terms. This paper describes the evolution and development of Darwin Core, a data standard for publishing and integrating biodiversity information. We focus on the categories of terms that define the standard, differences between simple and relational Darwin Core, how the standard has been implemented, and the community processes that are essential for maintenance and growth of the standard. We present case-study extensions of the Darwin Core into new research communities, including metagenomics and genetic resources. We close by showing how Darwin Core records are integrated to create new knowledge products documenting species distributions and changes due to environmental perturbations. PMID:22238640

  2. Implications of Common Core State Standards on the Social Studies

    Science.gov (United States)

    Kenna, Joshua L.; Russell, William B., III.

    2014-01-01

    Social studies teachers have often been on the outside looking in during much of the era billed as the standards-based educational reform (SBER), but with the adoption and implementation of the Common Core State Standards (CCSS), social studies teachers seem to have been invited back inside. Yet, how will the standards impact social studies…

  3. Slicing and Dicing the ELA Common Core Standards

    Science.gov (United States)

    Goatley, Virginia

    2012-01-01

    The English Language Arts Common Core State Standards (ELA CCSS) come at a time when many reading teachers, literacy coaches, and classroom teachers seek more extensive literacy practices than the policy mandates of No Child Left Behind and Reading First. These initiatives placed requirements for instruction in core aspects of reading at the…

  4. Common Core State Standards for Students with Gifts and Talents

    Science.gov (United States)

    VanTassel-Baska, Joyce

    2015-01-01

    As many states have adopted the Common Core State Standards (CCSS), teachers can look to these standards as a framework for supporting students with gifts and talents. Differentiation of curriculum and instruction to address the CCSS will be necessary to meet the unique learning needs of learners with high ability and those with gifts and talents.…

  5. Tying Together the Common Core of Standards, Instruction, and Assessments

    Science.gov (United States)

    Phillips, Vicki; Wong, Carina

    2010-01-01

    Clear, high standards will enable us to develop an education system that ensures that high school graduates are ready for college. The Bill & Melinda Gates Foundation has been working with other organizations to develop a Common Core of Standards. The partners working with the foundation are developing tools that will show teachers what is…

  6. 7 CFR 1755.30 - List of telecommunications standard contract forms.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false List of telecommunications standard contract forms... UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND STANDARD CONTRACT FORMS § 1755.30 List of telecommunications standard contract forms. (a...

  7. Slope across the Curriculum: Principles and Standards for School Mathematics and Common Core State Standards

    Science.gov (United States)

    Nagle, Courtney; Moore-Russo, Deborah

    2014-01-01

    This article provides an initial comparison of the Principles and Standards for School Mathematics and the Common Core State Standards for Mathematics by examining the fundamental notion of slope. Each set of standards is analyzed using eleven previously identified conceptualizations of slope. Both sets of standards emphasize Functional Property,…

  8. The common core mathematics standards transforming practice through team leadership

    CERN Document Server

    Hull, Ted H; Balka, Don S

    2012-01-01

    Transform math instruction with effective CCSS leadership The Common Core State Standards for mathematics describe the "habits of mind" that teachers should develop in their students without which the content standards cannot be successfully implemented. This professional development resource helps principals and math leaders grapple with the changes that must be addressed so that teachers can implement the practices required by the CCSS. Included are: A clear explanation of the CCSS for Mathematical Practice  Techniques to help leadership teams collaboratively implement and maintain the new standards A proficiency matrix with examples of instructional strategies for helping students reach competency in each standard.

  9. Mathematical Modeling, Sense Making, and the Common Core State Standards

    Science.gov (United States)

    Schoenfeld, Alan H.

    2013-01-01

    On October 14, 2013 the Mathematics Education Department at Teachers College hosted a full-day conference focused on the Common Core Standards Mathematical Modeling requirements to be implemented in September 2014 and in honor of Professor Henry Pollak's 25 years of service to the school. This article is adapted from my talk at this conference…

  10. Cloud-Based Collaborative Writing and the Common Core Standards

    Science.gov (United States)

    Yim, Soobin; Warschauer, Mark; Zheng, Binbin; Lawrence, Joshua F.

    2014-01-01

    The Common Core State Standards emphasize the integration of technology skills into English Language Arts (ELA) instruction, recognizing the demand for technology-based literacy skills to be college- and career- ready. This study aims to examine how collaborative cloud-based writing is used in in a Colorado school district, where one-to-one…

  11. Examining the Common Core State Standards in Agricultural Education

    Science.gov (United States)

    McKim, Aaron J.; Lambert, Misty D.; Sorensen, Tyson J.; Velez, Jonathan J.

    2015-01-01

    The Common Core State Standards (CCSS) represent a shift in the American education system. Included in the CCSS are opportunities for agriculture teachers to integrate math and English language arts content into their curriculum. Using the theory of planned behavior, we sought to identify Oregon agriculture teachers' attitudes, familiarity with,…

  12. 78 FR 78693 - List of Approved Spent Fuel Storage Casks: Transnuclear, Inc. Standardized NUHOMS® Cask System

    Science.gov (United States)

    2013-12-27

    ... Storage Casks: Transnuclear, Inc. Standardized NUHOMS[supreg] Cask System AGENCY: Nuclear Regulatory... storage regulations by revising the Transnuclear, Inc. Standardized NUHOMS[supreg] Cask System listing within the ``List of Approved Spent Fuel Storage Casks'' to include Amendment No. 11 to Certificate of...

  13. 78 FR 63408 - List of Approved Spent Fuel Storage Casks: Transnuclear, Inc. Standardized NUHOMS® Cask System

    Science.gov (United States)

    2013-10-24

    ... Fuel Storage Casks: Transnuclear, Inc. Standardized NUHOMS[supreg] Cask System AGENCY: Nuclear...] Cask System listing within the ``List of Approved Spent Fuel Storage Casks'' to include Amendment No... Safety Analysis Report for the Standardized NUHOMS[supreg] Horizontal Modular Storage System for...

  14. 77 FR 38421 - Listing Standards for Compensation Committees

    Science.gov (United States)

    2012-06-27

    ..., in any capacity other than as a director. For this purpose, remuneration includes any payment in... of a listed issuer's compensation committee to be a member of the board of directors and to be... annual meeting of shareholders (or a special meeting in lieu of the annual meeting) at which directors...

  15. DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-05-01

    The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information by the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this technical standards list are those recorded as of May 1, 1999.

  16. DOE Technical Standards List. Directory of DOE and contractor personnel involved in non-government standards activities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-06-01

    This is a periodic report on the level of agency participation in non-Government standards activities. This technical standards list is intended to assist US Department of Energy (DOE) management and other personnel involved in the DOE technical Standards Program by identifying those participating individuals. The body of this document contains a listing of DOE employees and DOE contractors who have submitted a Record of Non-Government Standards Activity. Additional names were added from rosters supplied by non-Government standards bodies. Appendices to this document are provided to list the information by parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees.

  17. The CORE Community: Career and Technical Education Teachers' Perceptions of the Common Core State Standards

    Science.gov (United States)

    Stair, Kristin S.; Warner, Wendy J; Hock, Gaea; Conrad, Michelle; Levy, Natalie

    2016-01-01

    The Common Core State Standards (CCSS) have been adopted in 43 states within the U.S. However, Career and Technical Education (CTE) teachers are often unsure how their programs can successfully integrate CCSS. The purpose of this study was to understand how participants in a CCSS professional development project perceive the CCSS and how they are…

  18. DOE technical standards list: Directory of DOE and contractor personnel involved in non-government standards activities

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-08-01

    The body of this document contains a listing of DOE employees and DOE contractors who have submitted form DOE F 1300.2, Record of Non-Government Standards Activity, which is attached to the end of this document and to DOE Order 1300.2A. Additional names were added from rosters supplied by non-Government standards bodies. The committees or governing bodies in which the person participates is listed after each name. An asterisk preceding the committee notation indicates that the person has identified himself or herself as the DOE representative on that committee. Appendices to this document are also provided to sort the information by the parent employment organization, by non-Government standards activity, and by the proper names of the non-Government standards organizations and committees. DOE employees and contractors listed in this TSL are those recorded as of July 1, 1996.

  19. Non-standard constraints within In-Core Fuel Management

    Energy Technology Data Exchange (ETDEWEB)

    Maldonado, G.I. [University of Cincinnati, P.O. Box 210072, Cincinnati, OH 45221-0072 (United States); Torres, C. [Comision Federal de Electricidad, Gestion de Combustible, Mexico, D.F. (Mexico); Marrote, G.N.; Ruiz U, V. [Global Nuclear Fuel, Americas, LLC, PO Box 780, M/C A16, Wilmington, NC28402 (United States)]. e-mail: Ivan.Maldonado@uc.edu

    2004-07-01

    Recent advancements in the area of nuclear fuel management optimization have been considerable and widespread. Therefore, it is not surprising that the design of today's nuclear fuel reloads can be a highly automated process that is often accompanied by sophisticated optimization software and graphical user interfaces to assist core designers. Most typically, among other objectives, optimization software seeks to maximize the energy efficiency of a fuel cycle while satisfying a variety of safety, operational, and regulatory constraints. Concurrently, the general industry trend continues to be one of pursuing higher generating capacity (i.e., power up-rates) alongside cycle length extensions. As these increasingly invaluable software tools and ambitious performance goals are pursued in unison, more aggressive core designs ultimately emerge that effectively minimize the margins to limits and, in some cases, may turn out less forgiving or accommodating to changes in underlying key assumptions. The purpose of this article is to highlight a few 'non-standard', though common constraints that can affect a BWR core design but which are often difficult, if not impossible, to implement into an automated setting. In a way, this article indirectly emphasizes the unique and irreplaceable role of the experienced designer in light of 'real life' situations. (Author)

  20. Non-standard constraints within In-Core Fuel Management

    International Nuclear Information System (INIS)

    Maldonado, G.I.; Torres, C.; Marrote, G.N.; Ruiz U, V.

    2004-01-01

    Recent advancements in the area of nuclear fuel management optimization have been considerable and widespread. Therefore, it is not surprising that the design of today's nuclear fuel reloads can be a highly automated process that is often accompanied by sophisticated optimization software and graphical user interfaces to assist core designers. Most typically, among other objectives, optimization software seeks to maximize the energy efficiency of a fuel cycle while satisfying a variety of safety, operational, and regulatory constraints. Concurrently, the general industry trend continues to be one of pursuing higher generating capacity (i.e., power up-rates) alongside cycle length extensions. As these increasingly invaluable software tools and ambitious performance goals are pursued in unison, more aggressive core designs ultimately emerge that effectively minimize the margins to limits and, in some cases, may turn out less forgiving or accommodating to changes in underlying key assumptions. The purpose of this article is to highlight a few 'non-standard', though common constraints that can affect a BWR core design but which are often difficult, if not impossible, to implement into an automated setting. In a way, this article indirectly emphasizes the unique and irreplaceable role of the experienced designer in light of 'real life' situations. (Author)

  1. Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

    Directory of Open Access Journals (Sweden)

    Jamie J Kirkham

    2017-11-01

    Full Text Available The use of core outcome sets (COS ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR].An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers, and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process.The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using

  2. Core Outcome Set-STAndards for Development: The COS-STAD recommendations.

    Science.gov (United States)

    Kirkham, Jamie J; Davis, Katherine; Altman, Douglas G; Blazeby, Jane M; Clarke, Mike; Tunis, Sean; Williamson, Paula R

    2017-11-01

    The use of core outcome sets (COS) ensures that researchers measure and report those outcomes that are most likely to be relevant to users of their research. Several hundred COS projects have been systematically identified to date, but there has been no formal quality assessment of these studies. The Core Outcome Set-STAndards for Development (COS-STAD) project aimed to identify minimum standards for the design of a COS study agreed upon by an international group, while other specific guidance exists for the final reporting of COS development studies (Core Outcome Set-STAndards for Reporting [COS-STAR]). An international group of experienced COS developers, methodologists, journal editors, potential users of COS (clinical trialists, systematic reviewers, and clinical guideline developers), and patient representatives produced the COS-STAD recommendations to help improve the quality of COS development and support the assessment of whether a COS had been developed using a reasonable approach. An open survey of experts generated an initial list of items, which was refined by a 2-round Delphi survey involving nearly 250 participants representing key stakeholder groups. Participants assigned importance ratings for each item using a 1-9 scale. Consensus that an item should be included in the set of minimum standards was defined as at least 70% of the voting participants from each stakeholder group providing a score between 7 and 9. The Delphi survey was followed by a consensus discussion with the study management group representing multiple stakeholder groups. COS-STAD contains 11 minimum standards that are the minimum design recommendations for all COS development projects. The recommendations focus on 3 key domains: the scope, the stakeholders, and the consensus process. The COS-STAD project has established 11 minimum standards to be followed by COS developers when planning their projects and by users when deciding whether a COS has been developed using reasonable

  3. Quantitative Literacy and the Common Core State Standards in Mathematics

    Directory of Open Access Journals (Sweden)

    Bernard L. Madison

    2015-01-01

    Full Text Available How supportive of quantitative literacy (QL are the Common Core State Standards in Mathematics (CCSSM? The answer is tentative and conditional. There are some QL-supportive features including a strong probability and statistics strand in grade 6 through high school; a measurements and data strand in K-5; ratio and proportional reasoning standards in grades 6 and 7; and a comprehensive and coherent approach to algebraic reasoning and logical argument. However, the standards are weak in supporting reasoning and interpretation, and there are indications that the applications in CCSSM – mostly unspecified – will not include many QL contextual situations. Early indicators of assessment items follow a similar path. Except for statistics, most of the high school standards are aimed at development of algebra and precalculus topics, and there will likely be little room for more sophisticated applications of the QL-friendly mathematics of grades 6-8. The experience with CCSSM is limited at this point, leaving several crucial results uncertain, including assessments, emphases on statistics, and kinds of modeling and other applications.

  4. 75 FR 52378 - Transfer of Commercial Standard Mail Parcels to Competitive Product List

    Science.gov (United States)

    2010-08-25

    ..., 2010, the United States Postal Service[reg] filed with the Postal Regulatory Commission a Request of the United States Postal Service to transfer commercial Standard Mail Parcels from the Mail... POSTAL SERVICE Transfer of Commercial Standard Mail Parcels to Competitive Product List AGENCY...

  5. 76 FR 54537 - Swap Data Repositories: Registration Standards, Duties and Core Principles

    Science.gov (United States)

    2011-09-01

    ... Part 49 Swap Data Repositories: Registration Standards, Duties and Core Principles; Final Rule #0;#0...: Registration Standards, Duties and Core Principles AGENCY: Commodity Futures Trading Commission. ACTION: Final... registration requirements, statutory duties, core principles and certain compliance obligations for registered...

  6. Pollutant plume delineation from tree core sampling using standardized ranks

    DEFF Research Database (Denmark)

    Wahyudi, Agung; Bogaert, Patrick; Trapp, Stefan

    2012-01-01

    There are currently contradicting results in the literature about the way chloroethene (CE) concentrations from tree core sampling correlate with those from groundwater measurements. This paper addresses this issue by focusing on groundwater and tree core datasets in CE contaminated site, Czech...... Republic. Preliminary analyses revealed strongly and positively skewed distributions for the tree core dataset, with an intra-tree variability accounting for more than 80% of the total variability, while the spatial analyses based on variograms indicated no obvious spatial pattern for CE concentration...... groundwater and tree core measurements. Nonetheless, tree core sampling and analysis proved to be a quick and inexpensive semi-quantitative method and a useful tool....

  7. Training in Vocational Assessment: Preparing Rehabilitation Counselors and Meeting the Requirements of the CORE Standards

    Science.gov (United States)

    Tansey, Timothy N.

    2008-01-01

    Assessment represents a foundational component of rehabilitation counseling services. The revised Council on Rehabilitation Education (CORE) standards implemented in 2004 resulted in the redesign of the knowledge and outcomes under the Assessment standard. The author reviews the current CORE standard for training in assessment within the context…

  8. Mathematical Communication in State Standards before the Common Core

    Science.gov (United States)

    Kosko, Karl Wesley; Gao, Yang

    2017-01-01

    Mathematical communication has been an important feature of standards documents since National Council of Teachers of Mathematics' (NCTM) (1989) "Curriculum and Evaluation Standards." Such an emphasis has influenced content standards of states from then to present. This study examined how effective the prevalence of various forms of…

  9. A Creative Approach to the Common Core Standards: The Da Vinci Curriculum

    Science.gov (United States)

    Chaucer, Harry

    2012-01-01

    "A Creative Approach to the Common Core Standards: The Da Vinci Curriculum" challenges educators to design programs that boldly embrace the Common Core State Standards by imaginatively drawing from the genius of great men and women such as Leonardo da Vinci. A central figure in the High Renaissance, Leonardo made extraordinary contributions as a…

  10. A new standard for core training in radiation safety

    International Nuclear Information System (INIS)

    Trinoskey, P.A.

    1997-02-01

    A new American National Standard for radiation worker training was recently developed. The standard emphasizes performance-based training and establishing a training program rather than simply prescribing objectives. The standard also addresses basic criteria, including instructor qualifications. The standard is based on input from a wide array of regulatory agencies, universities, national laboratories, and nuclear power entities. This paper presents an overview of the new standard and the philosophy behind it. The target audience includes radiation workers, management and supervisory personnel, contractors, students, emergency personnel, and visitors

  11. Primary Sources. Update: Teachers' Views on Common Core State Standards

    Science.gov (United States)

    Scholastic Inc. and the Bill & Melinda Gates Foundation, 2014

    2014-01-01

    Scholastic and the Bill & Melinda Gates Foundation fielded the third edition of the "Primary Sources" survey of America's teachers in July 2013 (see ED562664). Twenty thousand pre-K through grade 12 public school teachers responded, sharing their perspectives on issues important to their profession, including the Common Core State…

  12. Social Innovations vs international Trade? Core labour standards and exports

    OpenAIRE

    Siroën, Jean-Marc

    2011-01-01

    Labour standards defined by the ILO in 1998 are universal but applied very differently in countries. They are much better respected in high income countries. However, the causality between labour standards and growth remains a controversial issue. The strategies of export-led growth might encourage developing countries to contain the rising process of standards, first to increase their unskilled labour endowments for strengthening their comparative advantage relative to complying countries, a...

  13. Setting standards to determine core clerkship grades in pediatrics.

    Science.gov (United States)

    Dudas, Robert A; Barone, Michael A

    2014-01-01

    One of the greatest challenges for clerkship directors is assigning a final grade and determining the precise point at which a student either passes or fails a clinical clerkship. The process of incorporating both subjective and objective assessment data to provide a final summative grade can be challenging. We describe our experience conducting a standard-setting exercise to set defensible cut points in a 4-tiered grading system in our pediatric clerkship. Using the Hofstee standard-setting approach, 8 faculty members participated in an exercise to establish grade cut points. These faculty members were subsequently surveyed to assess their attitudes toward the standard-setting process as well as their reactions to these newly proposed standards. We applied the new cut points to a historic cohort of 116 Johns Hopkins University School of Medicine students from the academic year 2012-2013 to assess the potential impact on grade distributions. The resultant grading schema would lead to a significant increase in the number of students receiving a failing grade and a decrease in the number of students receiving a grade of honors in a historical cohort. Faculty reported that the Hofstee method was easy to understand and fair. All faculty members thought that grade inflation presently exists within the pediatric clerkship. This study demonstrates that practical standards using the Hofstee method can be set for medical students in a pediatric clerkship in which multiple performance measures are used. Copyright © 2014 Academic Pediatric Association. Published by Elsevier Inc. All rights reserved.

  14. Potential Ramifications of Common Core State Standards Adoption on Information Literacy

    Directory of Open Access Journals (Sweden)

    Jacob Paul Eubanks

    2014-07-01

    Full Text Available In the United States, the decline in jobs for high school educated workers and the proliferation of jobs for post-secondary educated workers is driving the development of the Common Core State Standards. The Common Core State Standards theoretically shift K-12 pedagogy towards ability development of critical and extended thinking skills, preparing high school graduates for college and career readiness. This literature review explores the reasoning behind the shift to the Common Core State Standards and asks questions regarding the potential ramifications their adoption might have on post-secondary information literacy instruction.

  15. Student Reading Growth Illuminates the Common Core Text-Complexity Standard: Raising Both Bars

    Science.gov (United States)

    Williamson, Gary L.; Fitzgerald, Jill; Stenner, Jackson A.

    2014-01-01

    The Common Core State Standards (CCSS) establish a challenging text-complexity standard for all high school graduates to read at college and workplace text-complexity levels. We argue that implementation of the CCSS standard requires concurrent examination of historical student reading-growth trends. An example of a historical student average…

  16. A Deeper Glimpse into the National Core Arts Standards for General Music

    Science.gov (United States)

    Zaffini, Erin Dineen

    2018-01-01

    The National Core Arts Standards in general music provide some exciting possibilities for music growth and understanding among our students. For those of us who are still unsure of how to read the standards or implement them in our classrooms, the standards also present some challenges for music educators. This article provides a deeper look into…

  17. A Case for Common Core State Standards: Gifted Curriculum 3.0

    Science.gov (United States)

    VanTassel-Baska, Joyce

    2012-01-01

    The Common Core State Standards (CCSS) is the most successful attempt to gain consensus across states for 21st century standards in language arts and mathematics. So far, 46 states have accepted these standards, with two consortia organized to translate them into resources and sample activities. A consultant firm has been hired to develop the…

  18. Assisting Pupils in Mathematics Achievement (The Common Core Standards)

    Science.gov (United States)

    Ediger, Marlow

    2011-01-01

    Mathematics teachers must expect reasonably high standards of achievement from pupils. Too frequently, pupils attain at a substandard level and more optimal achievement is necessary. Thus, pupils should have self esteem needs met in the school and classroom setting. Thus, learners feel that mathematics is worthwhile and effort must be put forth to…

  19. Core Knowledge and Standards: A Conversation with E.D. Hirsch, Jr.

    Science.gov (United States)

    O'Neil, John

    1999-01-01

    Hirsch believes it is vitally important to specify the "core knowledge" that all students must learn. Here, Hirsch explains elements of his K-8 core-knowledge sequence. Teachers should avoid canned lessons but should know where they are going. New English standards are unacceptable, since they omit Shakespeare's works. (MLH)

  20. A Research Agenda for the Common Core State Standards: What Information Do Policymakers Need?

    Science.gov (United States)

    Rentner, Diane Stark; Ferguson, Maria

    2014-01-01

    This report looks specifically at the information and data needs of policymakers related to the Common Core State Standards (CCSS) and the types of research that could provide this information. The ideas in this report were informed by a series of meetings and discussions about a possible research agenda for the Common Core, sponsored by the…

  1. Application of nursing core competency standard education in the training of nursing undergraduates

    OpenAIRE

    Wu, Fang-qin; Wang, Yan-ling; Wu, Ying; Guo, Ming

    2014-01-01

    Purpose: To evaluate the effectiveness of nursing core competency standard education in undergraduate nursing training. Methods: Forty-two nursing undergraduates from the class of 2007 were recruited as the control group receiving conventional teaching methods, while 31 students from the class of 2008 were recruited as the experimental group receiving nursing core competency standard education. Teaching outcomes were evaluated using comprehensive theoretical knowledge examination and objec...

  2. Improvement in operating characteristics resulting from the addition of FLIP fuel to a standard TRIGA core

    International Nuclear Information System (INIS)

    Randall, J.D.; Feltz, D.E.; Godsey, T.A.; Schumacher, R.F.

    1974-01-01

    To overcome problems associated with fuel burnup the Nuclear Science Center of Texas A and M University decided to convert from standard TRIGA fuel to FLIP-TRIGA fuel. FLIP fuel, which incorporates erbium as a burnable poison and is enriched to 70 percent in U-235, has a calculated lifetime of 9/MW-years. Due to limited funds a core was designed with a central region of 35 FLIP elements surrounded by 63 standard elements. Calculations indicated that the core excess and neutron fluxes were satisfactory, but no prediction was made of the improvements in core lifetime. The reactivity loss due to burnup for a standard core was measured to be 1.54 cents/MW-day. The addition of 35 FLIP fuel elements has reduced this value to approximately 0.5 cents/MW-day. The incorporation of FLIP fuel has, therefore, increased the lifetime of the core by a factor of three using fuel that is only 20 percent more expensive. The mixed core has other advantages as well. The power coefficient is less, the effect of xenon is less, and the fluxes in experimental facilities are higher. Thus, the mixed core has significant advantages over standard TRIGA fuel. (U.S.)

  3. The CIPM list of recommended frequency standard values: guidelines and procedures

    Science.gov (United States)

    Riehle, Fritz; Gill, Patrick; Arias, Felicitas; Robertsson, Lennart

    2018-04-01

    A list of standard reference frequency values (LoF) of quantum transitions from the microwave to the optical regime has been recommended by the International Committee for Weights and Measures (Comité international des poids et mesures, CIPM) for use in basic research, technology, and for the metrology of time, frequency and length. The CIPM LoF contains entries that are recommended as secondary representations of the second in the International System of Units, and entries that can be used to serve as realizations of the definition of the metre. The historical perspective that led to the CIPM LoF is outlined. Procedures have been developed for updating existing, and validating new, entries into the CIPM LoF. The CIPM LoF might serve as an entry for a future redefinition of the second by an optical transition.

  4. Spectrophotometric Evaluation of Polyetheretherketone (PEEK as a Core Material and a Comparison with Gold Standard Core Materials

    Directory of Open Access Journals (Sweden)

    Bogna Stawarczyk

    2016-06-01

    Full Text Available This study investigated the colorimetric properties of different veneering materials on core materials. Standardized specimens (10 mm × 10 mm × 1.5 mm reflecting four core (polyetheretherketone (PEEK, zirconia (ZrO2, cobalt–chromium–molybdenum alloy (CoCrMo, and titanium oxide (TiO2; thickness: 1.5 mm and veneering materials (VITA Mark II, IPS e.max CAD, LAVA Ultimate and VITA Enamic, all in shade A3; thickness: 0.5, 1.0, 1.5 and 2 mm, respectively were fabricated. Specimens were superimposed to assemblies, and the color was determined with a spectrophotometer (CieLab-System or a chair-side color measurement device (VITA EasyShade, respectively. Data were analyzed using three-, two-, and one-way ANOVA, a Chi2-test, and a Wilson approach (p < 0.05. The measurements with EasyShade showed A2 for VITA Mark II, A3.5 for VITA Enamic, B2 for LAVA Ultimate, and B3 for IPS e.max CAD. LabE-values showed significant differences between the tested veneering materials (p < 0.001. CieLab-System and VITA EasyShade parameters of the different assemblies showed a significant impact of core (p < 0.001, veneering material (p < 0.001, and thickness of the veneering material (p < 0.001. PEEK as core material showed comparable outcomes as compared to ZrO2 and CoCrMo, with respect to CieLab-System parameters for each veneering material. The relative frequency of the measured VITA EasyShade parameters regarding PEEK cores also showed comparable results as compared to the gold standard CoCrMo, regardless of the veneering material used.

  5. 29 CFR (non - mandatory) Appendix C to Subpart L of Part 1926-List of National Consensus Standards

    Science.gov (United States)

    2010-07-01

    ... 29 Labor 8 2010-07-01 2010-07-01 false mandatory) Appendix C to Subpart L of Part 1926-List of National Consensus Standards (Non Labor Regulations Relating to Labor (Continued) OCCUPATIONAL SAFETY AND... Consensus Standards ANSI/SIA A92.2-1990Vehicle-Mounted Elevating and Rotating Aerial Devices ANSI/SIA A92.3...

  6. 33 CFR Appendix - List of FPC Standard Articles Forms Used in Permits and Licenses for Hydroelectric Projects

    Science.gov (United States)

    2010-07-01

    ... 33 Navigation and Navigable Waters 3 2010-07-01 2010-07-01 false List of FPC Standard Articles Forms Used in Permits and Licenses for Hydroelectric Projects Navigation and Navigable Waters CORPS OF... Forms Used in Permits and Licenses for Hydroelectric Projects The following FPC standard articles Forms...

  7. 75 FR 38168 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines...

    Science.gov (United States)

    2010-07-01

    ... Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines Subject to the Requirements of... light-duty truck lines subject to the requirements of the Federal motor vehicle theft prevention... exemption from the parts marking requirements of the Theft Prevention Standard for the Jaguar XJ vehicle...

  8. Investigating the Language Demands in the Common Core State Standards for English Language Learners: A Comparison Study of Standards

    Science.gov (United States)

    Wolf, Mikyung Kim; Wang, Yuan; Huang, Becky H.; Blood, Ian

    2014-01-01

    This study reports on a critical review of the language demands contained in the Common Core State Standards for English language arts (CCSS-ELA) with the aim of deriving important implications for the instruction of English language learners. The language demands of the CCSS-ELA were compared with those of existing English language arts (ELA) and…

  9. Assessment of the technical specifications for a flip-standard TRIGA core

    International Nuclear Information System (INIS)

    Feltz, D.E.; Randall, J.D.

    1974-01-01

    The Technical Specifications for the Texas A and M University mixed, FLIP-Standard TRIGA core were the first submitted and approved under the draft version of Standard ANS-15.1. According to one AEC official these were the best Technical Specifications ever issued to a Research Reactor. The Technical Specifications are evaluated after operating under them for over seven months. (author)

  10. The Common Core State Standards' Quantitative Text Complexity Trajectory: Figuring out How Much Complexity Is Enough

    Science.gov (United States)

    Williamson, Gary L.; Fitzgerald, Jill; Stenner, A. Jackson

    2013-01-01

    The Common Core State Standards (CCSS) set a controversial aspirational, quantitative trajectory for text complexity exposure for readers throughout the grades, aiming for all high school graduates to be able to independently read complex college and workplace texts. However, the trajectory standard is presented without reference to how the…

  11. Assessment of the technical specifications for a flip-standard TRIGA core

    Energy Technology Data Exchange (ETDEWEB)

    Feltz, D E; Randall, J D [Texas A and M University (United States)

    1974-07-01

    The Technical Specifications for the Texas A and M University mixed, FLIP-Standard TRIGA core were the first submitted and approved under the draft version of Standard ANS-15.1. According to one AEC official these were the best Technical Specifications ever issued to a Research Reactor. The Technical Specifications are evaluated after operating under them for over seven months. (author)

  12. Adapting to Change: Teacher Perceptions of Implementing the Common Core State Standards

    Science.gov (United States)

    Burks, Brooke A.; Beziat, Tara L. R.; Danley, Sheree; Davis, Kashara; Lowery, Holly; Lucas, Jessica

    2015-01-01

    The current research study looked at secondary teachers' (grades 6-12) perceptions of their preparedness to implement the Common Core State Standards as well as their feelings about the training they have or have not received related to implementing the standards. The problem: Many conflicting views exist among teachers, parents, and others…

  13. A Comparison of the American Common Core State Standards with the Finnish Educational System

    Science.gov (United States)

    Lynch, Kelly

    2014-01-01

    With the failure of the No Child Left Behind policies of the 1990's, educational reformers wished to establish a "new and improved" set of standards for the United States to follow. However, since their inception in 2006-2007, the new Common Core State Standards have become increasingly unpopular due to the fact that they remain largely…

  14. The State of State Standards--and the Common Core--in 2010

    Science.gov (United States)

    Carmichael, Sheila Byrd; Martino, Gabrielle; Porter-Magee, Kathleen; Wilson, W. Stephen

    2010-01-01

    This review of state English language arts (ELA) and mathematics standards is the latest in a series of Fordham evaluations dating back to 1997. It comes at a critical juncture, as states across the land consider adoption of the Common Core State Standards. These are the authors' major findings: (1) Based on their criteria, the Common Core…

  15. Public Conceptions of Algorithms and Representations in the Common Core State Standards for Mathematics

    Science.gov (United States)

    Nanna, Robert J.

    2016-01-01

    Algorithms and representations have been an important aspect of the work of mathematics, especially for understanding concepts and communicating ideas about concepts and mathematical relationships. They have played a key role in various mathematics standards documents, including the Common Core State Standards for Mathematics. However, there have…

  16. The development of core standards for editing in South Africa | Law ...

    African Journals Online (AJOL)

    The development of core standards for editing in South Africa. Melanie Ann Law. Abstract. South African editors2currently work within a highly unregulated industry. One factor contributing to this lack of regulation is the absence of clear standards that define the role of the editor and demarcate the tasks and skills required to ...

  17. Cognitive Language and Content Standards: Language Inventory of the Common Core State Standards in Mathematics and the Next Generation Science Standards

    Science.gov (United States)

    Winn, Kathleen M.; Mi Choi, Kyong; Hand, Brian

    2016-01-01

    STEM education is a current focus of many educators and policymakers and the Next Generation Science Standards (NGSS) with the Common Core State Standards in Mathematics (CCSSM) are foundational documents driving curricular and instructional decision making for teachers and students in K-8 classrooms across the United States. Thus, practitioners…

  18. Preliminary investigations of a mixed standard-flip core for a TRIGA Mark II

    International Nuclear Information System (INIS)

    Ringle, John C.; Johnson, A.G.; Anderson, T.V.

    1974-01-01

    Several years ago it became apparent that due to our rapidly- increasing use rate, we would need a substantial amount of new fuel by late 1974 or early 1975. After investigations and discussions with GA, we decided that FLIP fuel would best meet our requirements for maximum fuel economy and high peak pulsing power. A proposal was submitted to the AEC for fuel assistance, and late in 1973 we were awarded a grant of $61,875. This will allow us to buy 3 FLIP-fueled-follower control rods, 1 instrumented FLIP fuel element, and 26 standard FLIP elements, giving us then a mixed core of approximately one-third FLIP and two-thirds standard elements. License amendments to accommodate this change are rather straightforward; modifications to the Technical Specifications will be somewhat more involved. The largest revisions which we envision are to our Safety Analysis Report. Although a few reactors have operated with a full FLIP core, and a few others have converted to mixed standard-FLIP cores, none of these has a standard Mark II core configuration. Those who have already converted to a mixed core have data and calculations which may be helpful to us, but the extent to which we can use these remains to be seen. The present status of our investigations into the analysis of a mixed standard-FLIP core will be presented. Any problems in calculational methods, finding appropriate data, modifications to Technical Specifications, etc., will be identified, and suggestions and help in these areas will be welcomed. (author)

  19. Preliminary investigations of a mixed standard-flip core for a TRIGA Mark II

    Energy Technology Data Exchange (ETDEWEB)

    Ringle, John C; Johnson, A G; Anderson, T V [Oregon State University (United States)

    1974-07-01

    Several years ago it became apparent that due to our rapidly- increasing use rate, we would need a substantial amount of new fuel by late 1974 or early 1975. After investigations and discussions with GA, we decided that FLIP fuel would best meet our requirements for maximum fuel economy and high peak pulsing power. A proposal was submitted to the AEC for fuel assistance, and late in 1973 we were awarded a grant of $61,875. This will allow us to buy 3 FLIP-fueled-follower control rods, 1 instrumented FLIP fuel element, and 26 standard FLIP elements, giving us then a mixed core of approximately one-third FLIP and two-thirds standard elements. License amendments to accommodate this change are rather straightforward; modifications to the Technical Specifications will be somewhat more involved. The largest revisions which we envision are to our Safety Analysis Report. Although a few reactors have operated with a full FLIP core, and a few others have converted to mixed standard-FLIP cores, none of these has a standard Mark II core configuration. Those who have already converted to a mixed core have data and calculations which may be helpful to us, but the extent to which we can use these remains to be seen. The present status of our investigations into the analysis of a mixed standard-FLIP core will be presented. Any problems in calculational methods, finding appropriate data, modifications to Technical Specifications, etc., will be identified, and suggestions and help in these areas will be welcomed. (author)

  20. AAVP Recommendations for Core Competency Standards Relating to Parasitological Knowledge and Skills.

    Science.gov (United States)

    Snowden, Karen F; Krecek, Rosina C; Bowman, Dwight D

    As part of the accreditation process, the American Veterinary Medical Association Council on Education has defined nine broad areas of core competencies that must be met by graduating students earning a Doctor of Veterinary Medicine degree. To define competencies in veterinary parasitology, the American Association of Veterinary Parasitologists (AAVP) has developed a detailed list of knowledge and skills that are recommended for inclusion in professional curricula. These recommendations were developed by instructors from colleges/schools of veterinary medicine in the US, Canada, and the Caribbean, and were reviewed and endorsed following AAVP guidelines.

  1. 76 FR 20251 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2012 Light Duty Truck Lines...

    Science.gov (United States)

    2011-04-12

    ... the incidence of motor vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. The standard seeks to facilitate such tracing by requiring that vehicle identification numbers... all exemptions on our Web site. However, we believe that re-publishing a list containing vehicle lines...

  2. 77 FR 32903 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2013 Light Duty Truck Lines...

    Science.gov (United States)

    2012-06-04

    ... the incidence of motor vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. The standard seeks to facilitate such tracing by requiring that vehicle identification numbers... exemptions on our Web site. However, we believe that republishing a list containing vehicle lines that have...

  3. Teachers' Understanding of and Concerns about Mathematical Modeling in the Common Core Standards

    Science.gov (United States)

    Wolf, Nancy Butler

    2013-01-01

    Educational reform is most likely to be successful when teachers are knowledgeable about the intended reform, and when their concerns about the reform are understood and addressed. The Common Core State Standards (CCSS) is an effort to establish a set of nationwide expectations for students and teachers. This study examined teacher understanding…

  4. Incorporating the Common Core's Problem Solving Standard for Mathematical Practice into an Early Elementary Inclusive Classroom

    Science.gov (United States)

    Fletcher, Nicole

    2014-01-01

    Mathematics curriculum designers and policy decision makers are beginning to recognize the importance of problem solving, even at the earliest stages of mathematics learning. The Common Core includes sense making and perseverance in solving problems in its standards for mathematical practice for students at all grade levels. Incorporating problem…

  5. Common Core State Standards for Mathematics: How Well Do the Textbook and Instructional Methods Align?

    Science.gov (United States)

    Rawding, Denise M.

    2016-01-01

    The Common Core Math Standards were written to address concerns that the math curriculum in the United States was not focused and coherent. Based on national and international assessments, the United States math scores have remained stagnant, while other countries have seen significant growth in their scores. This study, designed as an action…

  6. Integrating Apps with the Core Arts Standards in the 21st-Century Elementary Music Classroom

    Science.gov (United States)

    Heath-Reynolds, Julia; VanWeelden, Kimberly

    2015-01-01

    The implementation of the National Core Arts Standards has amplified the need for multiple approaches and opportunities for student responses and may compel music educators to use new tools. There are currently over one million available apps, and with the popularity of smart devices, student access to technology is increasing exponentially. Music…

  7. Full standard triple wireless transmission over 50m large core diameter graded index POF

    NARCIS (Netherlands)

    Shi, Y.; Morant, M.; Tangdiongga, E.; Llorente, R.; Koonen, A.M.J.

    2011-01-01

    We demonstrated for the first time a successful radio-over-1mm core diameter plastic optical fibre transmission of three simultaneous full standard wireless signals. Up to 50-m long transmission distance employing an eye-safe vertical cavity surface emitting laser has been achieved. The transmission

  8. Common Core Standards, Professional Texts, and Diverse Learners: A Qualitative Content Analysis

    Science.gov (United States)

    Yanoff, Elizabeth; LaDuke, Aja; Lindner, Mary

    2014-01-01

    This research study questioned the degree to which six professional texts guiding implementation of the Common Core Standards in reading address the needs of diverse learners. For the purposes of this research, diverse learners were specifically defined as above grade level readers, below grade level readers, and English learners. The researchers…

  9. The Relationship between Teacher Attitudes toward the Common Core State Standards and Informational Text

    Science.gov (United States)

    Estruch, Marcie Jane

    2018-01-01

    This study sought to determine the relationship between teachers' attitudes toward the Common Core State Standards and three predetermined factors. These factors were (1) teachers' attitudes toward the practicality of pedagogical shift three, balancing informational and literary texts, (2) teachers' attitudes toward school support with the…

  10. Leading Change for the Implementation of Common Core State Standards in Rural School Districts

    Science.gov (United States)

    Lopez, Paul; Wise, Donald

    2015-01-01

    Rural school districts across the nation, with their limited resources, face daunting challenges posed by the implementation of the Common Core State Standards. This article presents a recent study of 13 rural school districts in the Central Valley of California and how these districts are responding to those challenges. A total of 352 teachers…

  11. Constructing Assessment Model of Primary and Secondary Educational Quality with Talent Quality as the Core Standard

    Science.gov (United States)

    Chen, Benyou

    2014-01-01

    Quality is the core of education and it is important to standardization construction of primary and secondary education in urban (U) and rural (R) areas. The ultimate goal of the integration of urban and rural education is to pursuit quality urban and rural education. Based on analysing the related policy basis and the existing assessment models…

  12. Using "The Joy Luck Club" to Teach Core Standards and 21st Century Literacies

    Science.gov (United States)

    Burns, Leslie David; Botzakis, Stergios G.

    2012-01-01

    In this article the authors illustrate an instructional unit based on a Common Core grades 9-10 illustrative text--Amy Tan's "Two Kinds" from "The Joy Luck Club." They demonstrate how teachers can meet the new standards "and" respond to students' 21st-century needs by using this modern classic along with other traditional and new media resources.…

  13. RAFTing with Raptors: Connecting Science, English Language Arts, and the Common Core State Standards

    Science.gov (United States)

    Senn, Gary J.; McMurtrie, Deborah H.; Coleman, Bridget K.

    2013-01-01

    This article explores using the RAFT strategy (Role, Audience, Format, Topic) for writing in science classes. The framework of the RAFT strategy will be explained, and connections with Common Core State Standards (CCSS) for ELA/Literacy will be discussed. Finally, there will be a discussion of a professional learning experience for teachers in…

  14. Examining English Language Arts Common Core State Standards Instruction through Cultural Historical Activity Theory

    Science.gov (United States)

    Barrett-Tatum, Jennifer

    2015-01-01

    The English Language Arts Common Core State Standards and corresponding assessments brought about many changes for educators, their literacy instruction, and the literacy learning of their students. This study examined the day-to-day literacy instruction of two primary grade teachers during their first year of full CCSS implementation. Engestr?m's…

  15. High School Teachers' Perspectives on the English Language Arts Common Core State Standards: An Exploratory Study

    Science.gov (United States)

    Ajayi, Lasisi

    2016-01-01

    This was an exploratory study that examined high school teachers' perspectives about their early experiences with the English language arts Common Core State Standards. The sources of data for the study included a survey and structured interviews. Twenty-three high school ELA teachers from one unified school district in Southern California…

  16. Incidence of tissue coring during transseptal catheterization when using electrocautery and a standard transseptal needle.

    Science.gov (United States)

    Greenstein, Eugene; Passman, Rod; Lin, Albert C; Knight, Bradley P

    2012-04-01

    The application of radiofrequency electrocautery to a standard, open-ended transseptal needle has been used to facilitate transseptal puncture (TSP). The purpose of this study was to determine the incidence of cardiac tissue coring when this technique is used. A model using excised swine hearts submerged in a saline-filled basin was developed to simulate TSP with electrocautery and a standard transseptal needle. Punctures were performed without the use of electrocautery and by delivering radiofrequency energy to the transseptal needle using a standard electrocautery pen at 3 target sites (fossa ovalis, non-fossa ovalis septum, and aorta). The tissue of the submerged heart was gently tented, and the needle was advanced on delivery of radiofrequency. The devices were retracted, and the needle was flushed in a collection basin. None of the TSPs without cautery caused tissue coring. For TSPs using electrocautery, the frequency of coring was at least 21% for any puncture permutation used in the study and averaged 37% at septal sites (Pelectrocautery and a standard open-ended Brockenbrough needle resulted in coring of the septal tissue in 35% of cases (33 of 96 punctures).

  17. Strengthen Your Music Program by Incorporating Aspects of the ELA Common Core State Standards

    Science.gov (United States)

    Smith, Nancy Thompson

    2014-01-01

    Implementation of the English Language Arts (ELA) Common Core State Standards (CCSS) reduces the traditional separation between the study of different subjects. Increased focus on nonfiction reading and writing means more incorporation of other content, such as music, into language arts classes. CCSS's emphasis on speaking and writing across…

  18. Integrating the English Language Arts Common Core State Standards into Physical Education

    Science.gov (United States)

    James, Alisa R.; Bullock, Kerri

    2015-01-01

    Physical education teachers are expected to implement the English language arts (ELA) Common Core State Standards (CCSS) in their instruction. This has proved to be challenging for many physical educators. The purpose of this article is to provide developmentally appropriate examples of how to incorporate the ELA CCSS into physical education,…

  19. From time-based to competency-based standards: core transitional competencies in plastic surgery.

    Science.gov (United States)

    Lutz, Kristina; Yazdani, Arjang; Ross, Douglas

    2015-01-01

    Competency-based medical education is becoming increasingly prevalent and is likely to be mandated by the Royal College in the near future. The objective of this study was to define the core technical competencies that should be possessed by plastic surgery residents as they transition into their senior (presently postgraduate year 3) years of training. A list of potential core competencies was generated using a modified Delphi method that included the investigators and 6 experienced, academic plastic surgeons from across Canada and the United States. Generated items were divided into 7 domains: basic surgical skills, anesthesia, hand surgery, cutaneous surgery, esthetic surgery, breast surgery, and craniofacial surgery. Members of the Delphi group were asked to rank particular skills on a 4-point scale with anchored descriptors. Item reduction resulted in a survey consisting of 48 skills grouped into the aforementioned domains. This self-administered survey was distributed to all Canadian program directors (n = 11) via e-mail for validation and further item reduction. The response rate was 100% (11/11). Using the average rankings of program directors, 26 "core" skills were identified. There was agreement of core skills across all domains except for breast surgery and esthetic surgery. Of them, 7 skills were determined to be above the level of a trainee at this stage; a further 15 skills were agreed to be important, but not core, competencies. Overall, 26 competencies have been identified as "core" for plastic surgery residents to possess as they begin their senior, on-service years. The nature of these skills makes them suitable for teaching in a formal, simulated environment, which would ensure that all plastic surgery trainees are competent in these tasks as they transition to their senior years of residency. Copyright © 2014 Association of Program Directors in Surgery. Published by Elsevier Inc. All rights reserved.

  20. Standard Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This test method covers the determination of the relative amount of water absorption by various types of structural core materials when immersed or in a high relative humidity environment. This test method is intended to apply to only structural core materials; honeycomb, foam, and balsa wood. 1.2 The values stated in SI units are to be regarded as the standard. The inch-pound units given may be approximate. This standard does not purport to address all of the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

  1. Standardization of 32P activity determination method in soil-root cores for root distribution studies

    International Nuclear Information System (INIS)

    Sharma, R.B.; Ghildyal, B.P.

    1976-01-01

    The root distribution of wheat variety UP 301 was obtained by determining the 32 P activity in soil-root cores by two methods, viz., ignition and triacid digestion. Root distribution obtained by these two methods was compared with that by standard root core washing procedure. The percent error in root distribution as determined by triacid digestion method was within +- 2.1 to +- 9.0 as against +- 5.5 to +- 21.2 by ignition method. Thus triacid digestion method proved better over the ignition method. (author)

  2. The Common Core State Standards and the Role of Instructional Materials: A Case Study on EdReports.org

    Science.gov (United States)

    Watt, Michael G.

    2016-01-01

    The purpose of this study was to review research studies investigating the role of instructional materials in relation to the Common Core State Standards and to evaluate whether a new organisation, EdReports.org, founded to evaluate the alignment of instructional materials to the Common Core State Standards, has achieved its objectives. Content…

  3. Representation and Analysis of Chemistry Core Ideas in Science Education Standards between China and the United States

    Science.gov (United States)

    Wan, Yanlan; Bi, Hualin

    2016-01-01

    Chemistry core ideas play an important role in students' chemistry learning. On the basis of the representations of chemistry core ideas about "substances" and "processes" in the Chinese Chemistry Curriculum Standards (CCCS) and the U.S. Next Generation Science Standards (NGSS), we conduct a critical comparison of chemistry…

  4. Draft of standard for graphite core components in high temperature gas-cooled reactor

    International Nuclear Information System (INIS)

    Shibata, Taiju; Sawa, Kazuhiro; Eto, Motokuni; Kunimoto, Eiji; Shiozawa, Shusaku; Oku, Tatsuo; Maruyama, Tadashi

    2010-01-01

    For the design of the graphite components in the High Temperature Engineering Test Reactor (HTTR), the graphite structural design code for the HTTR etc. were applied. However, general standard systems for the High Temperature Gas-cooled Reactor (HTGR) have not been established yet. The authors had studied on the technical issues which is necessary for the establishment of a general standard system for the graphite components in the HTGR. The results of the study were documented and discussed at a 'Special committee on research on preparation for codes for graphite components in HTGR' at Atomic Energy Society of Japan (AESJ). As a result, 'Draft of Standard for Graphite Core Components in High Temperature Gas-cooled Reactor.' was established. In the draft standard, the graphite components are classified three categories (A, B and C) in the standpoints of safety functions and possibility of replacement. For the components in the each class, design standard, material and product standards, and in-service inspection and maintenance standard are determined. As an appendix of the design standard, the graphical expressions of material property data of 1G-110 graphite as a function of fast neutron fluence are expressed. The graphical expressions were determined through the interpolation and extrapolation of the irradiated data. (author)

  5. The CORE Community: Career and Technical Education Teachers' Perceptions of the Common Core State Standards after a Professional Development Training

    Science.gov (United States)

    Stair, Kristin; Hock, Gaea; Warner, Wendy; Levy, Natalie; Conrad, Michelle

    2017-01-01

    Since the 1983 U.S Department of Education's report, "A Nation at Risk," various educational initiatives have been developed to support an increase in state standards and greater educational accountability (Liebtag, 2013). Despite opportunities to link Common Core State Standards (CCSS) and instructional curriculum, CTE teachers often…

  6. Michigan Senate Bill 826: Replace Common Core with pre-2011 Massachusetts Standards

    Directory of Open Access Journals (Sweden)

    Sandra Stotsky

    2016-04-01

    Full Text Available Interested in academic standards and assessments proven to raise student achievement? You won’t get that from the Common Core Standards and their associated consortium tests, PARCC and SBAC. Despite the boisterous hype of higher, deeper, richer, more rigorous, and so on, there exists no valid evidence to support their claims of higher quality, achievement, or college readiness. There is a set of state standards and assessments, however, proven through actual experience to have raised academic achievement for students at all levels and in all curricular pathways: those used in Massachusetts from 2000 to 2011. So, why not use them? Such a proposal was recently proposed, and passed, by the Michigan Senate Education Policy Committee. Here, we provide links to Sandra Stotsky’s testimony before that committee, along with other relevant links. - See more at: http://nonpartisaneducation.org/Review/Resources/MichiganBill.htm

  7. A Comparison of Higher-Order Thinking between the Common Core State Standards and the 2009 New Jersey Content Standards in High School

    Science.gov (United States)

    Sforza, Dario; Tienken, Christopher H.; Kim, Eunyoung

    2016-01-01

    The creators and supporters of the Common Core State Standards claim that the Standards require greater emphasis on higher-order thinking than previous state standards in mathematics and English language arts. We used a qualitative case study design with content analysis methods to test the claim. We compared the levels of thinking required by the…

  8. IC3 Internet and Computing Core Certification Global Standard 4 study guide

    CERN Document Server

    Rusen, Ciprian Adrian

    2015-01-01

    Hands-on IC3 prep, with expert instruction and loads of tools IC3: Internet and Computing Core Certification Global Standard 4 Study Guide is the ideal all-in-one resource for those preparing to take the exam for the internationally-recognized IT computing fundamentals credential. Designed to help candidates pinpoint weak areas while there's still time to brush up, this book provides one hundred percent coverage of the exam objectives for all three modules of the IC3-GS4 exam. Readers will find clear, concise information, hands-on examples, and self-paced exercises that demonstrate how to per

  9. Integration of the Common Core State Standards into CTE: Challenges and Strategies of Career and Technical Teachers

    Science.gov (United States)

    Asunda, Paul A.; Finnell, Alicia M.; Berry, Nicholas R.

    2015-01-01

    In recent years, conversations about the importance of education standards in our school systems have intensified. Common Core State Standards (CCSS) are being implemented across most of the country. The standards require a major shift in instruction and the needed supports really are not there. This study investigated the common barriers,…

  10. Developing standardized connection analysis techniques for slim hole core rod designs

    International Nuclear Information System (INIS)

    Fehr, G.; Bailey, E.I.

    1994-01-01

    Slim hole core rod design remains essentially in the proprietary domain. API standardization provides the ability to perform engineering analyses and dimensional inspections through the use of documents, ie: Specifications, Bulletins, and Recommended Practices. In order to provide similar engineering capability for non-API slim hole connections, this paper develops the initial phase of what may evolve into an engineering tool to provide at least an indication of relative serviceability between two connection styles for a given application. The starting point for this process will look at bending strength ratios and connection strength calculations. Since empirical data are yet needed to verify the approaches proposed in this paper, it is recognized that the alternatives presented here are only a first step to developing useful rules of thumb which may lead to later standardization

  11. Future Standardization of Space Telecommunications Radio System with Core Flight System

    Science.gov (United States)

    Briones, Janette C.; Hickey, Joseph P.; Roche, Rigoberto; Handler, Louis M.; Hall, Charles S.

    2016-01-01

    NASA Glenn Research Center (GRC) is integrating the NASA Space Telecommunications Radio System (STRS) Standard with the Core Flight System (cFS), an avionics software operating environment. The STRS standard provides a common, consistent framework to develop, qualify, operate and maintain complex, reconfigurable and reprogrammable radio systems. The cFS is a flexible, open architecture that features a plugand- play software executive called the Core Flight Executive (cFE), a reusable library of software components for flight and space missions and an integrated tool suite. Together, STRS and cFS create a development environment that allows for STRS compliant applications to reference the STRS application programmer interfaces (APIs) that use the cFS infrastructure. These APIs are used to standardize the communication protocols on NASAs space SDRs. The cFS-STRS Operating Environment (OE) is a portable cFS library, which adds the ability to run STRS applications on existing cFS platforms. The purpose of this paper is to discuss the cFS-STRS OE prototype, preliminary experimental results performed using the Advanced Space Radio Platform (ASRP), the GRC S- band Ground Station and the SCaN (Space Communication and Navigation) Testbed currently flying onboard the International Space Station (ISS). Additionally, this paper presents a demonstration of the Consultative Committee for Space Data Systems (CCSDS) Spacecraft Onboard Interface Services (SOIS) using electronic data sheets (EDS) inside cFE. This configuration allows for the data sheets to specify binary formats for data exchange between STRS applications. The integration of STRS with cFS leverages mission-proven platform functions and mitigates barriers to integration with future missions. This reduces flight software development time and the costs of software-defined radio (SDR) platforms. Furthermore, the combined benefits of STRS standardization with the flexibility of cFS provide an effective, reliable and

  12. Career listings.

    Science.gov (United States)

    1994-01-12

    Nursing Standard regrets that it is no longer able to take listings over the telephone because of unprecedented demand. Readers are reminded that the listings section is for the use of charitable and professional organisations, unions and health authorities to publicise forthcoming events.

  13. The MCART radiation physics core: the quest for radiation dosimetry standardization.

    Science.gov (United States)

    Kazi, Abdul M; MacVittie, Thomas J; Lasio, Giovanni; Lu, Wei; Prado, Karl L

    2014-01-01

    Dose-related radiobiological research results can only be compared meaningfully when radiation dosimetry is standardized. To this purpose, the National Institute of Allergy and Infectious Diseases (NIAID)-sponsored Medical Countermeasures Against Radiological Threats (MCART) consortium recently created a Radiation Physics Core (RPC) as an entity to assume responsibility of standardizing radiation dosimetry practices among its member laboratories. The animal research activities in these laboratories use a variety of ionizing photon beams from several irradiators such as 250-320 kVp x-ray generators, Cs irradiators, Co teletherapy machines, and medical linear accelerators (LINACs). In addition to this variety of sources, these centers use a range of irradiation techniques and make use of different dose calculation schemes to conduct their experiments. An extremely important objective in these research activities is to obtain a Dose Response Relationship (DRR) appropriate to their respective organ-specific models of acute and delayed radiation effects. A clear and unambiguous definition of the DRR is essential for the development of medical countermeasures. It is imperative that these DRRs are transparent between centers. The MCART RPC has initiated the establishment of standard dosimetry practices among member centers and is introducing a Remote Dosimetry Monitoring Service (RDMS) to ascertain ongoing quality assurance. This paper will describe the initial activities of the MCART RPC toward implementing these standardization goals. It is appropriate to report a summary of initial activities with the intent of reporting the full implementation at a later date.

  14. Comparison of thermohydraulic and nuclear aspects in a standard HEU core and a typical LEU core for the HFR Petten. A case study

    International Nuclear Information System (INIS)

    Pruimboom, H.; Tas, A.

    1985-01-01

    Within the framework of the RERTR program various HEU-LEU core calculations have been performed by ANL in a cooperative effort with ECN and JRC Petten. The main purpose of this work has been to gain competence in analysing HEU-LEU core conversion for high power Materials Testing Reactors and to assist in a possible HEU-LEU conversion of the HFR Petten. For reference purposes the present HFR standard core (HEU) in the 'old' vessel geometry was calculated at first. As a next step the new vessel geometry and the increased fuel weights were taken into account. Subsequently various LEU HFR core options have been analysed. Main parameters in the LEU study were the uranium loading in the meat, the fuel type, the thickness of the meat, the number of fuel plates per element and the type of burnable poison applied. Though the study has not yet been completed, one of its striking preliminary results concerns the increased power peaking in the LEU fuel elements as compared with the HEU situation. A preliminary analysis of the thermal characteristics of a typical LEU core as compared with a standard HEU core has been made and is presented in the paper. A short survey of the various HEU and LEU calculations is given. The thermal safety analysis procedure for the HFR, as based on the flow instability criterion, is clarified. Finally, the thermal comparison HEU versus LEU and the resulting conclusions are presented. (author)

  15. Common Core State Standards for ELA/Literacy and Next Generation Science Standards: Convergences and Discrepancies Using Argument as an Example

    Science.gov (United States)

    Lee, Okhee

    2017-01-01

    As the Common Core State Standards (CCSS) for English language arts (ELA)/literacy and the Next Generation Science Standards (NGSS) highlight connections across subject areas, convergences and discrepancies come into view. As a prominent example, this article focuses on how the CCSS and the NGSS treat "argument," especially in Grades…

  16. Introduction of virtual detectors for core monitoring system of korean standard nuclear power plant

    International Nuclear Information System (INIS)

    Eun, Ki Lee.; Yong, Hee Kim.; Jybe, Ho Cha.; Moon, Ghu Park.

    2000-01-01

    A novel algorithm known as the virtual detector method (VDM) is introduced to reconstruct the axial power shape (APS) for the on-line core monitoring system of the Korean Standard Nuclear Power Plant (KSNP). A pure statistical method (SM) is also introduced and the results are compared with the currently implemented five-mode Fourier fitting method (FFM). VDM adopts nine virtual detector informations coupled with a regression model based on the Alternating Conditional Expectation (ACE) algorithm. VDM uses Fourier fitting with the information of nine virtual detectors expanded from the currently implemented FFM, which uses five-level detector information. By introducing virtual detectors, we can increase the number of axial detectors, and thus expect the computational errors of APS to be reduced. The two methods (SM and VDM) are applied to in-core mapping data from six cycles of Yong Gwang nuclear power plant Units 3 and 4. For ∼ 3500 cases of APSs extracted from a cycle of operation which is simulated by a three-dimensional nodal code, the accuracy of the three methods (SM, VDM, FFM) is compared. The average root mean square (RMS) error and average of axial peaking error of SM and VDM resulted in reduction of more than 50 % and 70 %, respectively, relative to FFM. VDM and SM also show more realistic axial profiles and predict more accurate axial peaking than FFM. These improvements can contribute to a larger thermal margin. SM shows the most accurate results for all cases. VDM can almost obtain the same results as SM, and using far fewer computation steps. VDM can be a useful tool for precisely reconstructing axial power shapes in a core monitoring system. (authors)

  17. A seismic analysis of Korean standard PWR fuels under transition core conditions

    International Nuclear Information System (INIS)

    Kim, Hyeong Koo; Park, Nam Kyu; Jang, Young Ki; Kim, Jae Ik; Kim, Kyu Tae

    2005-01-01

    The PLUS7 fuel is developed to achieve higher thermal performance, burnup and more safety margin than the conventional fuel used in the Korean Standard Nuclear Plants (KSNPs) and to sustain structural integrity under increased seismic requirement in Korea. In this study, a series of seismic analysis have been performed in order to evaluate the structural integrity of fuel assemblies associated with seismic loads in the KSNPs under transition core conditions replacing the Guardian fuel, which is a resident fuel in the KSNP reactors, with the PLUS7 fuel. For the analysis, transition core seismic models have been developed, based on the possible fuel loading patterns. And the maximum impact forces on the spacer grid and various stresses acting on the fuel components have been evaluated and compared with the through-grid strength of spacer grids and the stress criteria specified in the ASME code for each fuel component, respectively. Then three noticeable parameters regarding as important parameters governing fuel assembly dynamic behavior are evaluated to clarify their effects on the fuel impact and stress response. As a result of the study, it has been confirmed that both the PLUS7 and the Guardian fuel sustain their structural integrity under the transition core condition. And when the damping ratio is constant, increasing the natural frequency of fuel assembly results in a decrease in impact force. The fuel assembly flexural stiffness has an effect increasing the stress of fuel assembly, but not the impact force. And the spacer grid stiffness is directly related with the impact force response. (author)

  18. Examining Elementary Literacy Teachers' Perceptions of Their Preparedness to Implement the English Language Arts Common Core State Standards

    Science.gov (United States)

    Adams-Budde, Melissa; Miller, Samuel

    2015-01-01

    The purpose of our study was to examine elementary literacy teachers' perceptions of their preparedness to implement the ELA CCSS [English Language Arts Common Core State Standards]. We defined preparedness across three dimensions: teachers' perceived levels of knowledge of the standards and its components; efficacy to implement changes; and…

  19. Engineering task plan for the annual revision of the rotary mode core sampling system safety equipment list

    International Nuclear Information System (INIS)

    BOGER, R.M.

    1999-01-01

    This Engineering Task Plan addresses an effort to provide an update to the RMCS Systems 3 and 4 SEL and DCM in order to incorporate the changes to the authorization basis implemented by HNF-SD-WM-BIO-001, Rev. 0 (Draft), Addendum 5 , Safety Analysis for Rotary Mode Core Sampling. Responsibilities, task description, cost estimate, and schedule are presented

  20. ZAKI a windows-based k sub o standardization code for in-core INAA

    CERN Document Server

    Ojo, J O

    2002-01-01

    A new computer code ZAKI, for k sub o -based INAA standardization, written in Visual Basic for the WINDOWS environment is described. The parameter alpha measuring the deviation of the epithermal neutron spectrum shape from the ideal 1/E shape, and the thermal-to-epithermal flux ratio f, are monitored at each irradiation position for each irradiation using the ''triple bare monitor with k sub o '' technique. Stability of the irradiation position with respect to alpha and f is therefore assumed only for the duration of the irradiation. This now makes it possible to use k sub o standardization even for in-core reactor irradiation channels without an a priori knowledge of alpha and f values as required by existing commercial software. ZAKI is considerably versatile and contains features which allow for use of several detectors at different counting geometries, direct inputting of peak search output from GeniePc, and automatic nuclide identification of all gamma lines using an in-built library. Sample results for ...

  1. ZAKI: a windows-based ko standardization code for in-core INAA

    International Nuclear Information System (INIS)

    Ojo, J.O.; Filby, R.H.

    2002-01-01

    A new computer code ZAKI, for k o -based INAA standardization, written in Visual Basic for the WINDOWS environment is described. The parameter α measuring the deviation of the epithermal neutron spectrum shape from the ideal 1/E shape, and the thermal-to-epithermal flux ratio f, are monitored at each irradiation position for each irradiation using the ''triple bare monitor with k o '' technique. Stability of the irradiation position with respect to α and f is therefore assumed only for the duration of the irradiation. This now makes it possible to use k o standardization even for in-core reactor irradiation channels without an a priori knowledge of α and f values as required by existing commercial software. ZAKI is considerably versatile and contains features which allow for use of several detectors at different counting geometries, direct inputting of peak search output from GeniePc, and automatic nuclide identification of all gamma lines using an in-built library. Sample results for two certified reference materials are presented

  2. Comparisons of significant parameters for a standard 20% enriched and FLIP 70% enriched TRIGA core

    International Nuclear Information System (INIS)

    Ringle, John C.; Anderson, Terrance V.; Johnson, Arthur G.

    1978-01-01

    A comparison is made between the 20% and 70% enriched cores. The initial start-up data for both cores show the FLIP needs ∼3.8 times the 235 U mass as the 20% core just to go critical. Operational configurations for both cores indicate a need for ∼33% additional fuel above initial critical for adequate maneuvering excess. The fuel element worths are higher in the central core locations for the 20% elements while the peripheral element worths are about the same (with some thermal flux peaking in the FLIP perheral elements). Pulsing comparisons of the two cores show significant differences in reactivity insertions and power peaks. (author)

  3. Handwriting and Common Core State Standards: Teacher, Occupational Therapist, and Administrator Perceptions From New York State Public Schools.

    Science.gov (United States)

    Collette, Debra; Anson, Kylie; Halabi, Nora; Schlierman, April; Suriner, Allison

    Handwriting is the cornerstone of written performance and communication for school-age children. This mixed-methods study explored the impact of Common Core State Standards on handwriting instruction and its effects on perceptions regarding children's written responses in elementary school. Using surveys and interviews of elementary teachers, occupational therapists, and administrators in New York State public schools, we sought to understand current trends in handwriting instruction, changes in time spent on handwriting instruction in the classroom, supports offered to students who did not meet expectations for handwriting, and the impact of Common Core on children's written expression. Themes emerged revealing decreased handwriting instruction time and inconsistent use of handwriting instructional programs in the classroom after implementation of Common Core. Handwriting should be considered as a greater component in the foundational standards in Common Core. Occupational therapy services can support handwriting instruction implementation. Copyright © 2017 by the American Occupational Therapy Association, Inc.

  4. A safety equipment list for rotary mode core sampling systems operation in single shell flammable gas tanks; TOPICAL

    International Nuclear Information System (INIS)

    SMALLEY, J.L.

    1999-01-01

    This document identifies all interim safety equipment to be used for rotary mode core sampling of single-shell flammable gas tanks utilizing Rotary Mode Core Sampling systems (RMCS). This document provides the safety equipment for RMCS trucks HO-68K-4600, HO-68K-4647, trucks three and four respectively, and associated equipment. It is not intended to replace or supersede WHC-SD-WM-SEL-023, (Kelly 1991), or WHC-SD-WM-SEL-032, (Corbett 1994), which classifies 80-68K-4344 and HO-68K-4345 respectively. The term ''safety equipment'' refers to safety class (SC) and safety significant (SS) equipment, where equipment refers to structures, systems and components (SSC's). The identification of safety equipment in this document is based on the credited design safety features and analysis contained in the Authorization Basis (AB) for rotary mode core sampling operations in single-shell flammable gas tanks. This is an interim safety classification since the AB is interim. This document will be updated to reflect the final RMCS equipment safety classification designations upon completion of a final AB which will be implemented with the release of the Final Safety Analysis Report (FSAR)

  5. A safety equipment list for rotary mode core sampling systems operation in single shell flammable gas tanks

    International Nuclear Information System (INIS)

    SMALLEY, J.L.

    1999-01-01

    This document identifies all interim safety equipment to be used for rotary mode core sampling of single-shell flammable gas tanks utilizing Rotary Mode Core Sampling systems (RMCS). This document provides the safety equipment for RMCS trucks HO-68K-4600, HO-68K-4647, trucks three and four respectively, and associated equipment. It is not intended to replace or supersede WHC-SD-WM-SEL-023, (Kelly 1991), or WHC-SD-WM-SEL-032, (Corbett 1994), which classifies 80-68K-4344 and HO-68K-4345 respectively. The term ''safety equipment'' refers to safety class (SC) and safety significant (SS) equipment, where equipment refers to structures, systems and components (SSC's). The identification of safety equipment in this document is based on the credited design safety features and analysis contained in the Authorization Basis (AB) for rotary mode core sampling operations in single-shell flammable gas tanks. This is an interim safety classification since the AB is interim. This document will be updated to reflect the final RMCS equipment safety classification designations upon completion of a final AB which will be implemented with the release of the Final Safety Analysis Report (FSAR)

  6. Development of a standard data base for FBR core nuclear design. 10. Reevaluation of atomic number density of JOYO Mk-II core

    Energy Technology Data Exchange (ETDEWEB)

    Numata, Kazuyuki; Sato, Wakaei [Japan Nuclear Cycle Development Inst., Oarai, Ibaraki (Japan). Oarai Engineering Center; Ishikawa, Makoto; Arii, Yoshio [Nuclear Energy System Incorporation, Tokyo (Japan)

    1999-07-01

    The material composition of JOYO Mk-II core components in its initial core was reevaluated as a part of the effort for developing a standard data base for FBR core nuclear design. The special feature of the reevaluation is to treat the decay of Pu-241 isotope, so that the atomic number densities of Pu-241 and Am-241 in fuel assemblies can be exactly evaluated on the initial critical date, Nov. 22nd, 1982. Further, the atomic number densities of other core components were also evaluated to improve the analytical accuracy. Those include the control rods which were not so strictly evaluated in the past, and the dummy fuels and the neutron sources which were not treated in the analytical model so far. The results of the present reevaluation were as follows: (1) The changes of atomic number densities of the major nuclides such as Pu-239, U-235 and U-238 were about {+-}0.2 to 0.3%. On the other hand, the number density of Pu-241, which was the motivation of the present work, was reduced by 12%. From the fact, the number densities in the past analysis might be based on the isotope measurement of the manufacturing point of time without considering the decay of Pu-241. (2) As the other core components, the number densities of control rods and outer reflector-type A were largely improved. (author)

  7. Severe Accident Mitigation by using Core Catcher applicable for Korea standard nuclear power plant

    International Nuclear Information System (INIS)

    Park, Hae Kyun; Kim, Sang Nyung

    2013-01-01

    Nuclear power plants have been designed and operated in order to prevent severe accident because of their risk that contains tremendous radioactive materials that are potentially hazardous. Moreover, the government requested the nuclear industry to implement a severe accident management strategy for existing reactors to mitigate the risk of potential severe accidents. However, Korea standard nuclear power plant(APR-1400 and OPR-1000) are much more vulnerable for severe accident management than that of developed countries. Due to the design feature of reactor cavity in Korea standard nuclear power plant, inequable and serious Molten Core-Concrete Interaction(MCCI) may cause considerable safety problem to the reactor containment liner. At worst, it brings the release of radioactive materials to the environment. This accident applies to the fourth level of defense in depth(IAEA 1996), 'severe accident'. This study proposes and designs the 'slope' to secure reactor containment liner integrity when the corium spreads out from the destroyed reactor vessel to the reactor cavity due to the core melting accident. For this, make the initial corium distribution evenly exploit the 'slope' on the basis of the study of Ex-vessel corium behavior to prevent inequable and serious MCCI, in order to mitigate severe accident. The viscosity has a dominant position in the calculation. According to the result, the spread out distance on the slope is 10.7146841m, considering the rough surface of the concrete(slope) and margin of reactor cavity end(under 11m). Easy to design, production and economic feasibility are the advantage of the designed slope in this study. However, the slope design may unsuitable when the sequences of the accidents did not satisfy the assumptions as mentioned. Despite of those disadvantages, the slope will show a great performance to mitigate the severe accident. As mentioned in assumption, the corium releasing time property was conservatively calculated

  8. Severe Accident Mitigation by using Core Catcher applicable for Korea standard nuclear power plant

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hae Kyun; Kim, Sang Nyung [Kyung Hee Univ., Yongin (Korea, Republic of)

    2013-10-15

    Nuclear power plants have been designed and operated in order to prevent severe accident because of their risk that contains tremendous radioactive materials that are potentially hazardous. Moreover, the government requested the nuclear industry to implement a severe accident management strategy for existing reactors to mitigate the risk of potential severe accidents. However, Korea standard nuclear power plant(APR-1400 and OPR-1000) are much more vulnerable for severe accident management than that of developed countries. Due to the design feature of reactor cavity in Korea standard nuclear power plant, inequable and serious Molten Core-Concrete Interaction(MCCI) may cause considerable safety problem to the reactor containment liner. At worst, it brings the release of radioactive materials to the environment. This accident applies to the fourth level of defense in depth(IAEA 1996), 'severe accident'. This study proposes and designs the 'slope' to secure reactor containment liner integrity when the corium spreads out from the destroyed reactor vessel to the reactor cavity due to the core melting accident. For this, make the initial corium distribution evenly exploit the 'slope' on the basis of the study of Ex-vessel corium behavior to prevent inequable and serious MCCI, in order to mitigate severe accident. The viscosity has a dominant position in the calculation. According to the result, the spread out distance on the slope is 10.7146841m, considering the rough surface of the concrete(slope) and margin of reactor cavity end(under 11m). Easy to design, production and economic feasibility are the advantage of the designed slope in this study. However, the slope design may unsuitable when the sequences of the accidents did not satisfy the assumptions as mentioned. Despite of those disadvantages, the slope will show a great performance to mitigate the severe accident. As mentioned in assumption, the corium releasing time property was

  9. Overview of the Common Core State Standard initiative and educational reform movement from the vantage of speech-language pathologists.

    Science.gov (United States)

    Staskowski, Maureen

    2012-05-01

    Educational reform is sweeping the country. The adoption and the implementation of the Common Core State Standards in almost every state are meant to transform education. It is intended to update the way schools educate, the way students learn, and to ultimately prepare the nation's next generation for the global workplace. This article will describe the Common Core State Standard initiative and the underlying concerns about the quality of education in the United States as well as the opportunities this reform initiative affords speech-language pathologists. Thieme Medical Publishers 333 Seventh Avenue, New York, NY 10001, USA.

  10. Several organic parameters on underlying hazardous constituents list can not be measured at the universal treatment standards

    International Nuclear Information System (INIS)

    Johnson, H.C.

    1998-01-01

    The Idaho National Engineering and Environmental Laboratory (INEEL) has several permitted treatment, storage and disposal facilities. The INEEL Sample Management Office (SMO) conducts all analysis subcontracting activities for Department of Energy Environmental Management programs at the INEEL. In this role, the INEEL SMO has had the opportunity to subcontract the analyses of various wastes (including ash from an interim status incinerator) requesting a target analyte list equivalent to the constituents listed in 40 Code of Federal Regulations. These analyses are required to ensure that treated wastes do not contain underlying hazardous constituents (UHC) at concentrations greater than the universal treatment standards (UTS) prior to land disposal. The INEEL SMO has conducted a good-faith effort by negotiating with several commercial laboratories to identify the lowest possible quantitation and detection limits that can be achieved for the organic UHC analytes. The results of this negotiating effort has been the discovery that no single laboratory (currently under subcontract with the INEEL SMO) can achieve a detection level that is within an order of magnitude of the UTS for all organic parameters on a clean sample matrix (e.g., sand). This does not mean that there is no laboratory that can achieve the order of magnitude requirements for all organic UHCs on a clean sample matrix. The negotiations held to date indicate that it is likely that no laboratory can achieve the order of magnitude requirements for a difficult sample matrix (e.g., an incinerator ash). The authors suggest that the regulation needs to be revised to address the disparity between what is achievable in the laboratory and the regulatory levels required by the UTS

  11. The Influence of Corporate Governance And Firm’s Characteristics on The Extent of Compliance With Masb Standards Among Malaysian Listed Companies

    OpenAIRE

    Azhar Abdul Rahman, PhD; Ku Nor Izah Ku Ismail, PhD; Wan Nordin Wan Hussin, PhD

    2013-01-01

    This paper contributes to our understanding of compliance with mandatory accounting standards. Specifically, we examine the efficacy of agency related mechanisms on the degree of disclosure compliance with the Malaysian Accounting Standards Board (MASB) accounting standards. Using data drawn from a sample of 170 Malaysian companies listed on the Kuala Lumpur Stock Exchange (KLSE) in 2004, we show that although overall disclosure compliance is high (85.2% of the items of information being disc...

  12. Standard deviation of local tallies in global Monte Carlo calculation of nuclear reactor core

    International Nuclear Information System (INIS)

    Ueki, Taro

    2010-01-01

    Time series methodology has been studied to assess the feasibility of statistical error estimation in the continuous space and energy Monte Carlo calculation of the three-dimensional whole reactor core. The noise propagation was examined and the fluctuation of track length tallies for local fission rate and power has been formally shown to be represented by the autoregressive moving average process of orders p and p-1 [ARMA(p,p-1)], where p is an integer larger than or equal to two. Therefore, ARMA(p,p-1) fitting was applied to the real standard deviation estimation of the power of fuel assemblies at particular heights. Numerical results indicate that straightforward ARMA(3,2) fitting is promising, but a stability issue must be resolved toward the incorporation in the distributed version of production Monte Carlo codes. The same numerical results reveal that the average performance of ARMA(3,2) fitting is equivalent to that of the batch method with a batch size larger than 100 and smaller than 200 cycles for a 1,100 MWe pressurized water reactor. (author)

  13. Standard practice for radiologic examination of flat panel composites and sandwich core materials used in aerospace applications

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2009-01-01

    1.1 This practice is intended to be used as a supplement to Practices E 1742, E 1255, and E 2033. 1.2 This practice describes procedures for radiologic examination of flat panel composites and sandwich core materials made entirely or in part from fiber-reinforced polymer matrix composites. Radiologic examination is: a) radiographic (RT) with film, b) Computed Radiography (CR) with Imaging Plate, c) Digital Radiology (DR) with Digital Detector Array’s (DDA), and d) Radioscopic (RTR) Real Time Radiology with a detection system such as an Image Intensifier. The composite materials under consideration typically contain continuous high modulus fibers (> 20 GPa), such as those listed in 1.4. 1.3 This practice describes established radiological examination methods that are currently used by industry that have demonstrated utility in quality assurance of flat panel composites and sandwich core materials during product process design and optimization, process control, after manufacture inspection, in service exami...

  14. Verification Results of Safety-grade Optical Modem for Core Protection Calculator (CPC) in Korea Standard Nuclear Power Plant (KSNP)

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jangyeol; Son, Kwangseop; Lee, Youngjun; Cheon, Sewoo; Cha, Kyoungho; Lee, Jangsoo; Kwon, Keechoon [Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2013-05-15

    We confirmed that the coverage criteria for a safety-grade optical modem of a Core Protection Calculator is satisfactory using a traceability analysis matrix between high-level requirements and lower-level system test case data set. This paper describes the test environment, test components and items, a traceability analysis, and system tests as a result of system verification and validation based on Software Requirement Specifications (SRS) for a safety-grade optical modem of a Core Protection Calculator (CPC) in a Korea Standard Nuclear Power Plant (KSNP), and Software Design Specifications (SDS) for a safety-grade optical modem of a CPC in a KSNP. All tests were performed according to the test plan and test procedures. Functional testing, performance testing, event testing, and scenario based testing for a safety-grade optical modem of a Core Protection Calculator in a Korea Standard Nuclear Power Plant as a thirty-party verifier were successfully performed.

  15. Preservice Secondary Teachers' Conceptions from a Mathematical Modeling Activity and Connections to the Common Core State Standards

    Science.gov (United States)

    Stohlmann, Micah; Maiorca, Cathrine; Olson, Travis A.

    2015-01-01

    Mathematical modeling is an essential integrated piece of the Common Core State Standards. However, researchers have shown that mathematical modeling activities can be difficult for teachers to implement. Teachers are more likely to implement mathematical modeling activities if they have their own successful experiences with such activities. This…

  16. Common Core State Standards for Literacy in History/Social Studies, Science, and Technical Subjects for English Language Learners

    Science.gov (United States)

    de Oliveira, Luciana C., Ed.

    2016-01-01

    This volume in the Common Core State Standards (CCSS) for English Language Learners series was designed to deepen teacher's knowledge and provides instructional approaches and practices for supporting grades 6-12 ELLs as they meet the ambitious expectations of the CCSS for Literacy in History/Social Studies, Science, and Technical Subjects. This…

  17. Preservice Secondary Teachers Perceptions of College-Level Mathematics Content Connections with the Common Core State Standards for Mathematics

    Science.gov (United States)

    Olson, Travis A.

    2016-01-01

    Preservice Secondary Mathematics Teachers (PSMTs) were surveyed to identify if they could connect early-secondary mathematics content (Grades 7-9) in the Common Core State Standards for Mathematics (CCSSM) with mathematics content studied in content courses for certification in secondary teacher preparation programs. Respondents were asked to…

  18. The Role of District Office Leaders in the Adoption and Implementation of the Common Core State Standards in Elementary Schools

    Science.gov (United States)

    Durand, Francesca T.; Lawson, Hal A.; Wilcox, Kristen Campbell; Schiller, Kathryn S.

    2016-01-01

    Purpose: This multiple case study investigated district leaders' orientations and strategies as their elementary schools proceeded with state-mandated implementation of the Common Core State Standards (CCSS). We identified differences between schools achieving above-predicted outcomes on state CCSS assessments ("odds-beaters") and…

  19. The Common Core State Standards: An Opportunity to Enhance Formative Assessment in History/Social Studies Classrooms

    Science.gov (United States)

    Ateh, Comfort M.; Wyngowski, Aaron J.

    2015-01-01

    This article discusses the opportunity that the Common Core State Standards (CCSS) present for enhancing formative assessment (FA) in history and social studies classrooms. There is evidence that FA can enhance learning for students if implemented well. Unfortunately, teachers continue to be challenged in implementing FA in their classrooms. We…

  20. Portable optical frequency standard based on sealed gas-filled hollow-core fiber using a novel encapsulation technique

    DEFF Research Database (Denmark)

    Triches, Marco; Brusch, Anders; Hald, Jan

    2015-01-01

    A portable stand-alone optical frequency standard based on a gas-filled hollow-core photonic crystal fiber is developed to stabilize a fiber laser to the 13C2H2 P(16) (ν1 + ν3) transition at 1542 nm using saturated absorption. A novel encapsulation technique is developed to permanently seal...

  1. Teachers' Perceptions on Preparedness and Supports to Implement the English Language Arts Common Core State Standards

    Science.gov (United States)

    Fernandez, Maria Clara

    2017-01-01

    The purpose of this study was to: (1) describe elementary teachers' perceptions on their preparedness to implement the English Language Arts Common Core State Standards (ELA-CCSS); (2) determine how perceptions influenced changes in instructional practices; and (3) to explore ELA-CCSS implementation challenges and/or barriers in supporting teacher…

  2. Teaching to Exceed the English Language Arts Common Core State Standards: A Literacy Practices Approach for 6-12 Classrooms

    Science.gov (United States)

    Beach, Richard; Thein, Amanda Haertling; Webb, Allen

    2012-01-01

    As the new English Language Arts Common Core State Standards take hold across the United States, the need grows for pre-service and in-service teachers to be ready to develop curriculum and instruction that addresses their requirements. This timely, thoughtful, and comprehensive text directly meets this need. It delineates a literacy practices and…

  3. Writing to the Common Core: Teachers' Responses to Changes in Standards and Assessments for Writing in Elementary Schools

    Science.gov (United States)

    Wilcox, Kristen Campbell; Jeffery, Jill V.; Gardner-Bixler, Andrea

    2016-01-01

    This multiple case study investigated how the Common Core State Standards (CCSS) for writing and teacher evaluation system based in part on CCSS assessments might be influencing writing instruction in elementary schools. The sample included nine schools: Six achieved above-predicted performance on English Language Arts (ELA) as well as prior ELA…

  4. Accessing the Common Core Standards for Students with Learning Disabilities: Strategies for Writing Standards-Based IEP Goals

    Science.gov (United States)

    Caruana, Vicki

    2015-01-01

    Since the reauthorization of the Individuals With Disabilities Education Act (IDEA) in 2004, standards-based individualized education plans (IEPs) have been an expectation for serving students with disabilities in the K-12 public school setting. Nearly a decade after the mandates calling for standards-based IEPs, special educators still struggle…

  5. EFFECT OF INTERNATIONAL FINANCIAL REPORTING STANDARD ON CORPORATE PERFORMANCE OF SELECTED BANKS LISTED ON NIGERIA STOCK EXCHANGE

    Directory of Open Access Journals (Sweden)

    J. N. ELOSIUBA

    2018-03-01

    Full Text Available In the light of globalisation where foreign investment has become trendy, comparability of financial reports of Nigerian firms and those of other firms across the world has become a concern. Nigerian firms has been mandated to adopt the International Financial Reporting Standard (IFRS is their financial reporting.  This study has examined the effect of the IFRS adoption on the reported performance of Nigerian banks listed on the Nigerian Stock Exchange. Eight (8 out of the fourteen (14 quoted banks were selected for the study. Four indices of performance employed in the study are profitability using the Return on Equity, Liquidity using total deposit to total loan, loan grants and then market value measured by Price earnings ratio for the period (2011 and 2012. 2011 represented GAAP era while 2012 stands for IFRS adoption. A comparability index for the banks were computed using the Excel Spreadsheet for each of the banks on each variable. Then the One Sample Test was employed for the analyses. The mean was used to answer the research question while the t-statistics tested the hypotheses. The results showed that mean values for profitability, liquidity and market value are greater in the GAAP era (2011 than in the IFRS period (2012, while loan grant has higher for IFRS period (2012. The t-tested indicated none of the variables had significant effect.  Thus the study concluded that IFRS adopted does not have significant effect on bank performance reported in 2011 and 2012. The use of IFRS for all firms as well as incorporation of IFRS guideline in professional training are recommended by this study.

  6. A non-freaked out guide to teaching the common core using the 32 literacy anchor standards to develop college- and career-ready students

    CERN Document Server

    Stuart, Dave

    2014-01-01

    Implement the Common Core for ELA without all the stress A Non-Freaked Out Guide to Teaching the Common Core uses the often-neglected anchor standards to get to the heart of the Common Core State Standards (CCSS)-teaching students the skills they need to be college and career ready. Each anchor standard is broken down into its key points, and a discussion of each anchor standard''s central purpose helps outline the context for each required skill. This easy-to-read guide gives educators the kind of clear explanations, examples, and strategies they need to feel comfortable teaching the CCSS, an

  7. Stereotaxic core needle biopsy of breast microcalcifications obtained using a standard mammography table with an add-on unit

    International Nuclear Information System (INIS)

    Ward, S.E.; Taves, D.H.; McCurdy, L.I.

    2000-01-01

    To demonstrate the reliability of stereotaxic biopsy of indeterminate microcalcifications using a standard mammography table with an add-on unit. In 121 cases of indeterminate microcalcifications, core biopsy was performed using a standard mammography table with an add-on stereotaxic unit. Microcalcifications were identified on radiography of core specimens. Microcalcifications and a definitive histologic diagnosis were obtained in 112 core biopsies (92.6%), with no significant complications. In 23 lesions frank malignancy was diagnosed, and all of these diagnoses were confirmed on surgery. Pathologic examination suggested carcinoma in 4 lesions, and open biopsy confirmed malignancy in 3 of these cases. Four lesions showed atypical ductal hyperplasia. Benign disease was diagnosed in 81 lesions, of which 78 remained stable on mammographic follow-up (mean 16 months later) and 3 were subjected to surgical biopsy (of which 1 was malignant and 2 were benign). Nine cases were technically unsatisfactory because microcalcifications were not sampled. Stereotaxic core biopsy performed with an add-on unit is a safe and reliable technique for biopsy of indeterminate microcalcifications. For successful biopsy, microcalcifications must be harvested. Pathologic results should be correlated with mammographic findings. The accuracy rate compares favourably with results reported using prone biopsy tables. In an era of cost containment, this alternative to prone biopsy tables could result m significant savings in terms of capital investment and use of hospital rooms. In this study, surgical biopsy could have been avoided in 64.5% of cases. (author)

  8. Establishing Core Outcome Domains in Hemodialysis: Report of the Standardized Outcomes in Nephrology-Hemodialysis (SONG-HD) Consensus Workshop.

    Science.gov (United States)

    Tong, Allison; Manns, Braden; Hemmelgarn, Brenda; Wheeler, David C; Evangelidis, Nicole; Tugwell, Peter; Crowe, Sally; Van Biesen, Wim; Winkelmayer, Wolfgang C; O'Donoghue, Donal; Tam-Tham, Helen; Shen, Jenny I; Pinter, Jule; Larkins, Nicholas; Youssouf, Sajeda; Mandayam, Sreedhar; Ju, Angela; Craig, Jonathan C

    2017-01-01

    Evidence-informed decision making in clinical care and policy in nephrology is undermined by trials that selectively report a large number of heterogeneous outcomes, many of which are not patient centered. The Standardized Outcomes in Nephrology-Hemodialysis (SONG-HD) Initiative convened an international consensus workshop on November 7, 2015, to discuss the identification and implementation of a potential core outcome set for all trials in hemodialysis. The purpose of this article is to report qualitative analyses of the workshop discussions, describing the key aspects to consider when establishing core outcomes in trials involving patients on hemodialysis therapy. Key stakeholders including 8 patients/caregivers and 47 health professionals (nephrologists, policymakers, industry, and researchers) attended the workshop. Attendees suggested that identifying core outcomes required equitable stakeholder engagement to ensure relevance across patient populations, flexibility to consider evolving priorities over time, deconstruction of language and meaning for conceptual consistency and clarity, understanding of potential overlap and associations between outcomes, and an assessment of applicability to the range of interventions in hemodialysis. For implementation, they proposed that core outcomes must have simple, inexpensive, and validated outcome measures that could be used in clinical care (quality indicators) and trials (including pragmatic trials) and endorsement by regulatory agencies. Integrating these recommendations may foster acceptance and optimize the uptake and translation of core outcomes in hemodialysis, leading to more informative research, for better treatment and improved patient outcomes. Copyright © 2016 National Kidney Foundation, Inc. Published by Elsevier Inc. All rights reserved.

  9. Establishing Core Outcome Domains in Hemodialysis: Report of the Standardized Outcomes in Nephrology−Hemodialysis (SONG-HD) Consensus Workshop

    Science.gov (United States)

    Tong, Allison; Manns, Braden; Hemmelgarn, Brenda; Wheeler, David C.; Evangelidis, Nicole; Tugwell, Peter; Crowe, Sally; Van Biesen, Wim; Winkelmayer, Wolfgang C.; O’Donoghue, Donal; Tam-Tham, Helen; Shen, Jenny; Pinter, Jule; Larkins, Nicholas; Youssouf, Sajeda; Mandayam, Sreedhar; Ju, Angela; Craig, Jonathan C.

    2017-01-01

    Evidence-informed decision-making in clinical care and policy in nephrology is undermined by trials that selectively report a large number of heterogeneous outcomes, many of which are not patient-centered. The Standardized Outcomes in Nephrology−Hemodialysis (SONG-HD) Initiative convened an international consensus workshop on November 7, 2015, to discuss the identification and implementation of a potential core outcome set for all trials in hemodialysis. The purpose of this article is to report qualitative analyses of the workshop discussions, describing the key aspects to consider when establishing core outcomes in trials involving patients on hemodialysis. Key stakeholders including eight patients/caregivers and 47 health professionals (nephrologists, policy makers, industry, researchers) attended the workshop. Attendees suggested that identifying core outcomes required equitable stakeholder engagement to ensure relevance across patient populations; flexibility to consider evolving priorities over time; deconstruction of language and meaning for conceptual consistency and clarity; understanding of potential overlap and associations between outcomes; and an assessment of applicability to the range of interventions in hemodialysis. For implementation, they proposed that core outcomes must have simple, inexpensive and validated outcome measures that could be used in clinical care (quality ndicators) and trials (including pragmatic trials), and endorsement by regulatory agencies. Integrating these recommendations may foster acceptance and optimize the uptake and translation of core outcomes in hemodialysis, leading to more informative research, for better treatment, and improved patient outcomes. PMID:27497527

  10. The core health science library in Canada.

    Science.gov (United States)

    Huntley, J L

    1974-04-01

    Core lists in Canada are characterized by regional differences. The lists of current importance are: (1) the British Columbia acquisitions guide for hospital libraries, (2) three Saskatchewan lists for hospitals of different sizes, (3) a core list recommended for Ontario hospitals, (4) Quebec core lists, including French language lists.

  11. Engaging Teenagers in Astronomy Using the Lens of Next Generation Science Standards and Common Core State Standards

    Science.gov (United States)

    Gillette, Sean; Wolf, Debbie; Harrison, Jeremiah

    2017-06-01

    The Vanguard Double Star Workshop has been developed to teach eighth graders the technique of measuring position angle and separation of double stars. Through this program, the students follow in the footsteps of a professional scientist by researching the topic, performing the experiment, writing a scientific article, publishing a scientific article, and finally presenting the material to peers. An examination of current educational standards grounds this program in educational practice and philosophy.

  12. Engaging Teenagers in Astronomy Using the Lens of Next Generation Science Standards and Common Core State Standards (Abstract)

    Science.gov (United States)

    Gillette, S.; Wolf, D.; Harrison, J.

    2017-12-01

    (Abstract only) The Vanguard Double Star Workshop has been developed to teach eighth graders the technique of measuring position angle and separation of double stars. Through this program, the students follow in the footsteps of a professional scientist by researching the topic, performing the experiment, writing a scientific article, publishing a scientific article, and finally presenting the material to peers. An examination of current educational standards grounds this program in educational practice and philosophy.

  13. National Sexuality Education Standards: Core Content and Skills, K-12. A Special Publication of the Journal of School Health. Special Report

    Science.gov (United States)

    American School Health Association (NJ1), 2012

    2012-01-01

    The goal of this paper, "National Sexuality Education Standards: Core Content and Skills, K-12," is to provide clear, consistent and straightforward guidance on the "essential minimum, core content" for sexuality education that is developmentally and age-appropriate for students in grades K-12. The development of these standards is a result of an…

  14. International Spinal Cord Injury Core Data Set (version 2.0)-including standardization of reporting

    NARCIS (Netherlands)

    Biering-Sorensen, F.; DeVivo, M. J.; Charlifue, S.; Chen, Y.; New, P. W.; Noonan, V.; Post, M. W. M.; Vogel, L.

    Study design: The study design includes expert opinion, feedback, revisions and final consensus. Objectives: The objective of the study was to present the new knowledge obtained since the International Spinal Cord Injury (SCI) Core Data Set (Version 1.0) published in 2006, and describe the

  15. International Spinal Cord Injury Core Data Set (version 2.0)-including standardization of reporting

    NARCIS (Netherlands)

    Biering-Sørensen, F; DeVivo, M J; Charlifue, Susan; Chen, Y; New, P.W.; Noonan, V.; Post, M W M; Vogel, L.

    STUDY DESIGN: The study design includes expert opinion, feedback, revisions and final consensus. OBJECTIVES: The objective of the study was to present the new knowledge obtained since the International Spinal Cord Injury (SCI) Core Data Set (Version 1.0) published in 2006, and describe the

  16. The use of standardized patients in the plastic surgery residency curriculum: teaching core competencies with objective structured clinical examinations.

    Science.gov (United States)

    Davis, Drew; Lee, Gordon

    2011-07-01

    As of 2006, the Accreditation Council for Graduate Medical Education had defined six "core competencies" of residency education: interpersonal communication skills, medical knowledge, patient care, professionalism, practice-based learning and improvement, and systems-based practice. Objective structured clinical examinations using standardized patients are becoming effective educational tools, and the authors developed a novel use of the examinations in plastic surgery residency education that assesses all six competencies. Six plastic surgery residents, two each from postgraduate years 4, 5, and 6, participated in the plastic surgery-specific objective structured clinical examination that focused on melanoma. The examination included a 30-minute videotaped encounter with a standardized patient actor and a postencounter written exercise. The residents were scored on their performance in all six core competencies by the standardized patients and faculty experts on a three-point scale (1 = novice, 2 = moderately skilled, and 3 = proficient). Resident performance was averaged for each postgraduate year, stratified according to core competency, and scored from a total of 100 percent. Residents overall scored well in interpersonal communications skills (84 percent), patient care (83 percent), professionalism (86 percent), and practice-based learning (84 percent). Scores in medical knowledge showed a positive correlation with level of training (86 percent). All residents scored comparatively lower in systems-based practice (65 percent). The residents reported unanimously that the objective structured clinical examination was realistic and educational. The objective structured clinical examination provided comprehensive and meaningful feedback and identified areas of strengths and weakness for the residents and for the teaching program. The examination is an effective assessment tool for the core competencies and a valuable adjunct to residency training.

  17. Love, Flirt or Repel: Hybrid global governance of the ILO core labour standards

    NARCIS (Netherlands)

    ter Haar, B.

    2013-01-01

    Ever since its constitution the ILO has developed and maintained a system of labour standards in order to create decent work all over the world. With the globalisation of the economy multinationals have gained an important position in furthering these labour standards throughout their value chains.

  18. List of key words with classification for a standard safety report for nuclear power plants with PWR or BWR

    International Nuclear Information System (INIS)

    1976-01-01

    Under the efforts of improving the licensing procedure for nuclear power plants, the Federal Minister of the Interior set up a task group of experts of the manufacturers and operators of nuclear power plants, the assessors (Technische Ueberwachungsvereine, TUeVs), the Institute for Reactor Safety of the TUeVs, the licensing authorities of the Laender, and the Federal Ministry of the Interior which worked out a list of key words for writing the safety report for nuclear power plants with PWRs and BWRs. This list of key words is published herewith in order to encourage its application when writing or assessing safety reports for nuclear power plants and in order to present the opportunity to make proposals for improvement to a group as large as possible. At a later date, it is intended to incorporate the list of key words as soon as sufficient experience from the practical application will justify this, it is intended to incorporate the list of key words in a general administrative regulation. (orig.) [de

  19. Aligning Mathematical Tasks to the Common Core Standards for Mathematical Practice

    OpenAIRE

    Johnson, Raymond

    2016-01-01

    How do algebra teachers align mathematical tasks to the CCSSM Standards of Mathematical Practice? Using methods of design-based implementation research, we identified difficulties of alignment to practices and developed strategies identifying high-quality tasks.

  20. Development of national standardized all-hazard disaster core competencies for acute care physicians, nurses, and EMS professionals.

    Science.gov (United States)

    Schultz, Carl H; Koenig, Kristi L; Whiteside, Mary; Murray, Rick

    2012-03-01

    The training of medical personnel to provide care for disaster victims is a priority for the physician community, the federal government, and society as a whole. Course development for such training guided by well-accepted standardized core competencies is lacking, however. This project identified a set of core competencies and performance objectives based on the knowledge, skills, and attitudes required by the specific target audience (emergency department nurses, emergency physicians, and out-of-hospital emergency medical services personnel) to ensure they can treat the injuries and illnesses experienced by victims of disasters regardless of cause. The core competencies provide a blueprint for the development or refinement of disaster training courses. This expert consensus project, supported by a grant from the Robert Wood Johnson Foundation, incorporated an all-hazard, comprehensive emergency management approach addressing every type of disaster to minimize the effect on the public's health. An instructional systems design process was used to guide the development of audience-appropriate competencies and performance objectives. Participants, representing multiple academic and provider organizations, used a modified Delphi approach to achieve consensus on recommendations. A framework of 19 content categories (domains), 19 core competencies, and more than 90 performance objectives was developed for acute medical care personnel to address the requirements of effective all-hazards disaster response. Creating disaster curricula and training based on the core competencies and performance objectives identified in this article will ensure that acute medical care personnel are prepared to treat patients and address associated ramifications/consequences during any catastrophic event. Copyright © 2012 American College of Emergency Physicians. Published by Mosby, Inc. All rights reserved.

  1. Autopsy consent, brain collection, and standardized neuropathologic assessment of ADNI participants: the essential role of the neuropathology core.

    Science.gov (United States)

    Cairns, Nigel J; Taylor-Reinwald, Lisa; Morris, John C

    2010-05-01

    Our objectives are to facilitate autopsy consent, brain collection, and perform standardized neuropathologic assessments of all Alzheimer's Disease Neuroimaging Initiative (ADNI) participants who come to autopsy at the 58 ADNI sites in the USA and Canada. Building on the expertise and resources of the existing Alzheimer's Disease Research Center (ADRC) at Washington University School of Medicine, St. Louis, MO, a Neuropathology Core (NPC) to serve ADNI was established with one new highly motivated research coordinator. The ADNI-NPC coordinator provides training materials and protocols to assist clinicians at ADNI sites in obtaining voluntary consent for brain autopsy in ADNI participants. Secondly, the ADNI-NPC maintains a central laboratory to provide uniform neuropathologic assessments using the operational criteria for the classification of AD and other pathologies defined by the National Alzheimer Coordinating Center (NACC). Thirdly, the ADNI-NPC maintains a state-of-the-art brain bank of ADNI-derived brain tissue to promote biomarker and multi-disciplinary clinicopathologic studies. During the initial year of funding of the ADNI Neuropathology Core, there was notable improvement in the autopsy rate to 44.4%. In the most recent year of funding (September 1(st), 2008 to August 31(st) 2009), our autopsy rate improved to 71.5%. Although the overall numbers to date are small, these data demonstrate that the Neuropathology Core has established the administrative organization with the participating sites to harvest brains from ADNI participants who come to autopsy. Within two years of operation, the Neuropathology Core has: (1) implemented a protocol to solicit permission for brain autopsy in ADNI participants at all 58 sites who die and (2) to send appropriate brain tissue from the decedents to the Neuropathology Core for a standardized, uniform, and state-of-the-art neuropathologic assessment. The benefit to ADNI of the implementation of the NPC is very clear

  2. A benchmarking tool to evaluate computer tomography perfusion infarct core predictions against a DWI standard.

    Science.gov (United States)

    Cereda, Carlo W; Christensen, Søren; Campbell, Bruce Cv; Mishra, Nishant K; Mlynash, Michael; Levi, Christopher; Straka, Matus; Wintermark, Max; Bammer, Roland; Albers, Gregory W; Parsons, Mark W; Lansberg, Maarten G

    2016-10-01

    Differences in research methodology have hampered the optimization of Computer Tomography Perfusion (CTP) for identification of the ischemic core. We aim to optimize CTP core identification using a novel benchmarking tool. The benchmarking tool consists of an imaging library and a statistical analysis algorithm to evaluate the performance of CTP. The tool was used to optimize and evaluate an in-house developed CTP-software algorithm. Imaging data of 103 acute stroke patients were included in the benchmarking tool. Median time from stroke onset to CT was 185 min (IQR 180-238), and the median time between completion of CT and start of MRI was 36 min (IQR 25-79). Volumetric accuracy of the CTP-ROIs was optimal at an rCBF threshold of benchmarking tool can play an important role in optimizing CTP software as it provides investigators with a novel method to directly compare the performance of alternative CTP software packages. © The Author(s) 2015.

  3. Math starters 5- to 10-minute activities aligned with the common core math standards, grades 6-12

    CERN Document Server

    Muschla, Judith A; Muschla, Erin

    2013-01-01

    A revised edition of the bestselling activities guide for math teachers Now updated with new math activities for computers and mobile devices-and now organized by the Common Core State Standards-this book includes more than 650 ready-to-use math starter activities that get kids quickly focused and working as soon as they enter the classroom. Ideally suited for any math curriculum, these high-interest problems spark involvement in the day's lesson, help students build skills, and allow teachers to handle daily management tasks without wasting valuable instructional time. A newly updated edit

  4. The unstable core of global finance: contingent valuation and governance of international accounting standards

    NARCIS (Netherlands)

    Mügge, D.; Stellinga, B.

    2015-01-01

    Accounting standards are the foundations of the financial regulatory edifice, and global financial governance is no more stable than the asset valuations that feed it. Yet for two decades and up to this day, no international accounting rule for financial instruments - the bulk of banks' balance

  5. Optical frequency standard using acetylene-filled hollow-core photonic crystal fibers

    DEFF Research Database (Denmark)

    Triches, Marco; Michieletto, Mattia; Hald, Jan

    2015-01-01

    frequency instability. The locked fiber laser shows a fractional frequency instability below 4×10−12 for averaging time up to 104 s. The lock-point repeatability over more than 1 year is 1.3×10−11, corresponding to a standard deviation of 2.5 kHz. A complete experimental investigation of the light...

  6. Kindergarten Is More than Ready for the Common Core State Standards

    Science.gov (United States)

    Kramer-Vida, Louisa; Levitt, Roberta; Kelly, Susan P.

    2012-01-01

    Standards can aid educators as they work to produce strong student writers who can create meaningful and skillfully crafted authentic pieces of writing. This once-a-month, yearlong professional development program, conducted during the school day, shifted a district's kindergarten writing program to a writing workshop model that enabled the…

  7. State Standard-Setting Processes in Brief. State Academic Standards: Standard-Setting Processes

    Science.gov (United States)

    Thomsen, Jennifer

    2014-01-01

    Concerns about academic standards, whether created by states from scratch or adopted by states under the Common Core State Standards (CCSS) banner, have drawn widespread media attention and are at the top of many state policymakers' priority lists. Recently, a number of legislatures have required additional steps, such as waiting periods for…

  8. STUDY ON DISCLOSURE LEVEL OF COMPANIES LISTED ON THE BUCHAREST STOCK EXCHANGE IN ACCORDANCE WITH INTERNATIONAL FINANCIAL REPORTING STANDARDS: THE CASE OF INTANGIBLE ASSETS

    Directory of Open Access Journals (Sweden)

    CĂTĂLINA GORGAN

    2014-05-01

    Full Text Available In the context of economic globalization, the need for high quality financial information has become a desiderate. Accounting met such needs through a set of high quality standards, the International Financial Reporting Standards. Their global imposing, either through adoption or convergence, make its contribution to proper functioning of capital markets and even of the entire economy. The quality of financial reporting, however, is the result of how they are applied in each country or company. The objective of our study is to analyze the disclosure level of companies listed at Bucharest Stock Exchange (BSE in compliance with the presentation requirements of the international accounting standard IAS 38 “Intangible assets”. The empirical study revealed a significant level of non-compliance. In order to determine the degree of compliance with international accounting referential we built a disclosure index. Four hypothesis were tested in order to identify the factors that influence the disclosure level.

  9. Core Standards of the EUBIROD Project. Defining a European Diabetes Data Dictionary for Clinical Audit and Healthcare Delivery.

    Science.gov (United States)

    Cunningham, S G; Carinci, F; Brillante, M; Leese, G P; McAlpine, R R; Azzopardi, J; Beck, P; Bratina, N; Bocquet, V; Doggen, K; Jarosz-Chobot, P K; Jecht, M; Lindblad, U; Moulton, T; Metelko, Ž; Nagy, A; Olympios, G; Pruna, S; Skeie, S; Storms, F; Di Iorio, C T; Massi Benedetti, M

    2016-01-01

    A set of core diabetes indicators were identified in a clinical review of current evidence for the EUBIROD project. In order to allow accurate comparisons of diabetes indicators, a standardised currency for data storage and aggregation was required. We aimed to define a robust European data dictionary with appropriate clinical definitions that can be used to analyse diabetes outcomes and provide the foundation for data collection from existing electronic health records for diabetes. Existing clinical datasets used by 15 partner institutions across Europe were collated and common data items analysed for consistency in terms of recording, data definition and units of measurement. Where necessary, data mappings and algorithms were specified in order to allow partners to meet the standard definitions. A series of descriptive elements were created to document metadata for each data item, including recording, consistency, completeness and quality. While datasets varied in terms of consistency, it was possible to create a common standard that could be used by all. The minimum dataset defined 53 data items that were classified according to their feasibility and validity. Mappings and standardised definitions were used to create an electronic directory for diabetes care, providing the foundation for the EUBIROD data analysis repository, also used to implement the diabetes registry and model of care for Cyprus. The development of data dictionaries and standards can be used to improve the quality and comparability of health information. A data dictionary has been developed to be compatible with other existing data sources for diabetes, within and beyond Europe.

  10. Development of a standard data base for FBR core nuclear design. 9. Analysis of FCA XVII-1 experiments

    International Nuclear Information System (INIS)

    Yokoyama, Kenji; Ishikawa, Makoto; Oigawa, Hiroyuki; Iijima, Susumu

    1998-10-01

    Pnc had developed the adjusted nuclear cross-section library in which the results of the Jupiter experiments were reflected. Using this adjusted library, the distinct improvement of the accuracy in nuclear design of Fbr cores had been achieved. As a recent research, JNC develops a database of other integral data in addition to the JUPITER experiments, aiming at further improvement for accuracy and reliability. In this report, the authors describe the evaluation of the C/E values and the sensitivity analysis for FCA XVII-1 assembly. FCA XVII-1 is a representative mock-up of a MOX fuel sodium cooling FBR core. The criticality, reaction rate ratio, sodium void reactivity worth and 238 U Doppler reactivity worth of FCA XVII-1 were analyzed. The results of C/E values calculated by the standard analytical method for JUPITER experiments are similar to those calculated by the method of JAERI, except for the sodium void reactivity. So, further investigation for sodium void reactivity is necessary. Furthermore, sensitivity analysis shows the characteristics of FCA XVII-1 in comparison with ZPPR-9. (author)

  11. Short Shrift to Long Lists: An Alternative Approach to the Development of Performance Standards for School Principals.

    Science.gov (United States)

    Louden, William; Wildy, Helen

    1999-01-01

    Describes examples of standards frameworks for principals' work operant in three countries and describes an alternative approach based on interviewing 40 Australian principals. By combining qualitative case studies with probabilistic measurement techniques, the alternative approach provides contextually rich descriptions of growth in performance…

  12. 78 FR 44030 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2014 Light Duty Truck Lines...

    Science.gov (United States)

    2013-07-23

    ... vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. The standard seeks to facilitate such tracing by requiring that vehicle identification numbers (VINs), VIN derivative... continue to maintain a comprehensive database of all exemptions on our Web site. However, we believe that...

  13. 75 FR 34946 - Federal Motor Vehicle Theft Prevention Standard; Final Listing of 2011 Light Duty Truck Lines...

    Science.gov (United States)

    2010-06-21

    ... the incidence of motor vehicle theft by facilitating the tracing and recovery of parts from stolen vehicles. The standard seeks to facilitate such tracing by requiring that vehicle identification numbers... continue to maintain a comprehensive database of all exemptions on our Web site. However, we believe that...

  14. Common Core State Standards for English Language Arts & Literacy in History/Social Studies, Science, and Technical Subjects. Appendix C: Samples of Student Writing

    Science.gov (United States)

    Common Core State Standards Initiative, 2010

    2010-01-01

    This document presents writing samples that have been annotated to illustrate the criteria required to meet the Common Core State Standards for particular types of writing--argument, informative/explanatory text, and narrative--in a given grade. Each of the samples exhibits at least the level of quality required to meet the Writing standards for…

  15. Moving beyond Compliance: Promoting Research-Based Professional Discretion in the Implementation of the Common Core State Standards in English Language Arts

    Science.gov (United States)

    Woodard, Rebecca; Kline, Sonia

    2015-01-01

    State- and local-level mandates are currently being implemented to ensure strict compliance to the new national Common Core State Standards for English Language Arts (CCSS for ELA) and related assessments. These standards provide many potential opportunities to improve literacy education nationally and locally. However, the CCSS for ELA will…

  16. The application of “fair value” accounting standards to the income statements of companies listed in the Portuguese Stock Index-20 (PSI-20

    Directory of Open Access Journals (Sweden)

    Tiago Cardão-Pito

    2016-06-01

    Full Text Available Purpose – “Fair value” accounting standards are not consensual. Supporters claim that they offer a methodology to find the “correct” value of accounting items, whereas critics contend that “fair value” accounting reduces the reliability of financial statements through a complex and unpractical method based on subjective information. Still, the impacts of “fair value” accounting upon taxes and public revenues are rarely discussed. Design/methodology/approach – The Portuguese case allows us to study taxation and public revenues. Through European Union norms, “fair value” standards have become mandatory after 2005 for companies listed in European stock-exchanges. Nevertheless, Portuguese corporate tax law was reformulated in 2010 to strongly restrict the use of “fair value” for taxation purposes. We study the use of “fair value” in the Income Statements of the largest companies listed in the Portuguese exchange between 2005 and 2012. Findings – If Portugal had not adopted “fair value” standards, its tax revenue would have been higher. Over all analyzed years and in almost all studied companies, average “fair value” adjustments are negative. Although a statistical association between negative adjustments and the economic cycle was found, this statistical association is not very strong. Therefore, the economic cycle cannot be used as the only explanation for the use of “fair value”. Originality/value – This paper demonstrates that discussions concerning the “fair value” accounting method must not ignore its possible impacts on government taxes and public revenue.

  17. MONJU experimental data analysis and its feasibility evaluation to build up the standard data base for large FBR nuclear core design

    International Nuclear Information System (INIS)

    Sugino, K.; Iwai, T.

    2006-01-01

    MONJU experimental data analysis was performed by using the detailed calculation scheme for fast reactor cores developed in Japan. Subsequently, feasibility of the MONJU integral data was evaluated by the cross-section adjustment technique for the use of FBR nuclear core design. It is concluded that the MONJU integral data is quite valuable for building up the standard data base for large FBR nuclear core design. In addition, it is found that the application of the updated data base has a possibility to considerably improve the prediction accuracy of neutronic parameters for MONJU. (authors)

  18. The STAPL pList

    KAUST Repository

    Tanase, Gabriel; Xu, Xiabing; Buss, Antal; Harshvardhan,; Papadopoulos, Ioannis; Pearce, Olga; Smith, Timmie; Thomas, Nathan; Bianco, Mauro; Amato, Nancy M.; Rauchwerger, Lawrence

    2010-01-01

    We present the design and implementation of the stapl pList, a parallel container that has the properties of a sequential list, but allows for scalable concurrent access when used in a parallel program. The Standard Template Adaptive Parallel

  19. Applications of a lead pile coupled with fast reactor core of Yayoi as an intermediate energy neutron standard field

    International Nuclear Information System (INIS)

    Kosako, Toshiso; Nakazawa, Masaharu; Sekiguchi, Akira; Wakabayashi, Hiroaki.

    1976-10-01

    Intermediate neutron column of YAYOI reactor is here evaluated as an intermediate energy neutron standard field which provides a base of the measurements of various reaction rates in that energy region, including detector calibration and Doppler coefficient determination. The experiments were performed using YAYOI's core as a fast neutron source by coupling with the large lead pile, which is a 160 ton's octagon of 2.5 m high and with a thickness of about 2.5 m face to face distance. Spatial variation of the neutron flux in the lead pile was estimated by gold activation foils, and the neutron spectrum by sandwich foils, a helium-3 proportional counter and a proton recoil counter. The calculated results were obtained using one and two- dimensional discrete ordinate code, ANISN and TWOTRAN II. Through comparison of experiment with calculation, it became clear that the neutron field at the central block has simple energy spectrum and stable spatial distribution of the neutron flux, the absolute of which was 5.0 x 10 4 (n/cm 2 /sec/Watt) at the representative energy of 1 KeV. The energy spectrum of the position and the spatial dependent neutron flux in the lead pile are both represented by the semiempirical formula, which must be useful both for evaluation of experimental data and for future applications. (auth.)

  20. SedCT: MATLAB™ tools for standardized and quantitative processing of sediment core computed tomography (CT) data collected using a medical CT scanner

    Science.gov (United States)

    Reilly, B. T.; Stoner, J. S.; Wiest, J.

    2017-08-01

    Computed tomography (CT) of sediment cores allows for high-resolution images, three-dimensional volumes, and down core profiles. These quantitative data are generated through the attenuation of X-rays, which are sensitive to sediment density and atomic number, and are stored in pixels as relative gray scale values or Hounsfield units (HU). We present a suite of MATLAB™ tools specifically designed for routine sediment core analysis as a means to standardize and better quantify the products of CT data collected on medical CT scanners. SedCT uses a graphical interface to process Digital Imaging and Communications in Medicine (DICOM) files, stitch overlapping scanned intervals, and create down core HU profiles in a manner robust to normal coring imperfections. Utilizing a random sampling technique, SedCT reduces data size and allows for quick processing on typical laptop computers. SedCTimage uses a graphical interface to create quality tiff files of CT slices that are scaled to a user-defined HU range, preserving the quantitative nature of CT images and easily allowing for comparison between sediment cores with different HU means and variance. These tools are presented along with examples from lacustrine and marine sediment cores to highlight the robustness and quantitative nature of this method.

  1. Common Core State Standards in the Middle Grades: What's New in the Geometry Domain and How Can Teachers Support Student Learning?

    Science.gov (United States)

    Teuscher, Dawn; Tran, Dung; Reys, Barbara J.

    2015-01-01

    The Common Core State Standards for Mathematics (CCSSM) is a primary focus of attention for many stakeholders' (e.g., teachers, district mathematics leaders, and curriculum developers) intent on improving mathematics education. This article reports on specific content shifts related to the geometry domain in the middle grades (6-8)…

  2. Competitive Debate as Competency-Based Learning: Civic Engagement and Next-Generation Assessment in the Era of the Common Core Learning Standards

    Science.gov (United States)

    McIntosh, Jonathan; Milam, Myra

    2016-01-01

    As the adoption and execution of the Common Core State Standards (CCSS) have steadily increased, the debate community is presented with an opportunity to be more forward thinking and sustainable through the translation to curriculum planning and next-generation assessment as a movement towards Performance-Based Assessments. This paper focuses on…

  3. The Influences of Middle School Mathematics Teachers' Practical Rationality on Instructional Decision Making Regarding the Common Core State Standards for Mathematical Practices

    Science.gov (United States)

    Sobolewski-McMahon, Lauren M.

    2017-01-01

    The purpose of this study was to examine the influences of various facets of middle school mathematics teachers' practical rationality on their instructional decision making as they plan to enact the Common Core State Standards for Mathematical Practice, CCSS-MP1 (perseverance in problem solving) and CCSS-MP3 (communicating and critiquing). The…

  4. Common Core State Standards and Teacher Effectiveness. Q&A with Ross Wiener, Ph.D. REL Mid-Atlantic Teacher Effectiveness Webinar Series

    Science.gov (United States)

    Regional Educational Laboratory Mid-Atlantic, 2013

    2013-01-01

    In this REL Mid-Atlantic webinar, Dr. Ross Wiener, Vice President and Executive Director of the Education and Society Program, Aspen Institute, discussed strategies for integrating the Common Core State Standards (CCSS) into teacher effectiveness systems, including ways in which the CCSS can support professional growth and inform teacher…

  5. A "Common" Vision of Instruction? An Analysis of English/Language Arts Professional Development Materials Related to the Common Core State Standards

    Science.gov (United States)

    Hodge, Emily; Benko, Susanna L.

    2014-01-01

    The purpose of this article is to describe the stances put forward by a selection of professional development resources interpreting the Common Core State Standards for English Language Arts (ELA) teachers, and to analyse where these resources stand in relation to research in ELA. Specifically, we analyse resources written by English educators…

  6. Two-Dimensional Cutting (TDC Vitrectome: In Vitro Flow Assessment and Prospective Clinical Study Evaluating Core Vitrectomy Efficiency versus Standard Vitrectome

    Directory of Open Access Journals (Sweden)

    Mitrofanis Pavlidis

    2016-01-01

    Full Text Available Purpose. To evaluate comparative aspiration flow performance and also vitrectomy operating time efficiency using a double-cutting open port vitreous cutting system incorporated in a two-dimensional cutting (TDC, DORC International vitrectome design versus standard vitreous cutter. Methods. In vitro investigations compared aspiration flow rates in artificial vitreous humor at varying cutter speeds and vacuum levels using a TDC vitrectome and a standard vitrectome across different aspiration pump systems. A prospective single-centre clinical study evaluated duration of core vitrectomy in 80 patients with macular pucker undergoing 25-gauge or 27-gauge vitrectomy using either a TDC vitrectome at 16,000 cuts per minute (cpm or standard single-cut vitrectome, combined with a Valve Timing intelligence (VTi pump system (EVA, DORC International. Results. Aspiration flow rates remained constant independent of TDC vitrectome cut rate, while flow rates decreased linearly at higher cutter speeds using a classic single-blade vitrectome. Mean duration of core vitrectomy surgeries using a TDC vitreous cutter system was significantly (p<0.001 shorter than the mean duration of core vitrectomy procedures using a single-cut vitrectome of the same diameter (reduction range, 34%–50%. Conclusion. Vitrectomy surgery performed using a TDC vitrectome was faster than core vitrectomy utilizing a standard single-action vitrectome at similar cut speeds.

  7. Development of a standard data base for FBR core nuclear design (XIII). Analysis of small sample reactivity experiments at ZPPR-9

    International Nuclear Information System (INIS)

    Sato, Wakaei; Fukushima, Manabu; Ishikawa, Makoto

    2000-09-01

    A comprehensive study to evaluate and accumulate the abundant results of fast reactor physics is now in progress at O-arai Engineering Center to improve analytical methods and prediction accuracy of nuclear design for large fast breeder cores such as future commercial FBRs. The present report summarizes the analytical results of sample reactivity experiments at ZPPR-9 core, which has not been evaluated by the latest analytical method yet. The intention of the work is to extend and further generalize the standard data base for FBR core nuclear design. The analytical results of the sample reactivity experiments (samples: PU-30, U-6, DU-6, SS-1 and B-1) at ZPPR-9 core in JUPITER series, with the latest nuclear data library JENDL-3.2 and the analytical method which was established by the JUPITER analysis, can be concluded as follows: The region-averaged final C/E values generally agreed with unity within 5% differences at the inner core region. However, the C/E values of every sample showed the radial space-dependency increasing from center to core edge, especially the discrepancy of B-1 was the largest by 10%. Next, the influence of the present analytical results for the ZPPR-9 sample reactivity to the cross-section adjustment was evaluated. The reference case was a unified cross-section set ADJ98 based on the recent JUPITER analysis. As a conclusion, the present analytical results have sufficient physical consistency with other JUPITER data, and possess qualification as a part of the standard data base for FBR nuclear design. (author)

  8. Mapping of a standard documentation template to the ICF core sets for arthritis and low back pain.

    Science.gov (United States)

    Escorpizo, Reuben; Davis, Kandace; Stumbo, Teri

    2010-12-01

    To identify the contents of a documentation template in The Guide to Physical Therapist Practice using the International Classification of Functioning, Disability, and Health (ICF) Core Sets for rheumatoid arthritis, osteoarthritis, and low back pain (LBP) as reference. Concepts were identified from items of an outpatient documentation template and mapped to the ICF using established linking rules. The ICF categories that were linked were compared with existing arthritis and LBP Core Sets. Based on the ICF, the template had the highest number (29%) of linked categories under Activities and participation while Body structures had the least (17%). ICF categories in the arthritis and LBP Core Sets had a 37-55% match with the ICF categories found in the template. We found 164 concepts that were not classified or not defined and 37 as personal factors. The arthritis and LBP Core Sets were reflected in the contents of the template. ICF categories in the Core Sets were reflected in the template (demonstrating up to 55% match). Potential integration of ICF in documentation templates could be explored and examined in the future to enhance clinical encounters and multidisciplinary communication. Copyright © 2010 John Wiley & Sons, Ltd.

  9. Metaphors We Do Math By: A Comparative Case Study of Public and Catholic School Teachers’ Understanding of the Common Core State Standards in Mathematics

    OpenAIRE

    Branch, Jennifer Danielle

    2016-01-01

    The United States has undergone multiple mathematics reforms since the 1980s with each reform setting out to increase national test scores and improve mathematics education in the nation’s schools. The current reform, the Common Core State Standards for Mathematics (CCSSM), seeks to create mathematically proficient students through a more active and rigorous curriculum. The goal of this yearlong study was to examine the understanding that intermediate and middle school math teachers make of t...

  10. California Diploma Project Technical Report II: Alignment Study--Alignment Study of the Health Sciences and Medical Technology Draft Standards and California's Exit Level Common Core State Standards

    Science.gov (United States)

    McGaughy, Charis; de Gonzalez, Alicia

    2012-01-01

    The California Department of Education is in the process of revising the Career and Technical Education (CTE) Model Curriculum Standards. The Educational Policy Improvement Center (EPIC) conducted an investigation of the draft version of the Health Sciences and Medical Technology Standards (Health Science). The purpose of the study is to…

  11. Steps toward Unifying Dual Language Programs, Common Core State Standards, and Critical Pedagogy: Oportunidades, Estrategias Y Retos

    Science.gov (United States)

    Alfaro, Cristina; Durán, Richard; Hunt, Alexandra; Aragón, María José

    2014-01-01

    Recent education reforms have begun to reframe academic discussion and teacher practice surrounding bilingual educational approaches for preparing "21st century, college and career ready" citizens. Given this broader context, in this article we examine ways that we might join implementation of dual language programs, Common Core State…

  12. The board of directors in listed companies under the corporate governance system in Saudi law as compared to English law and global standards

    OpenAIRE

    Alamri, Khalid; Milman, David; Lawton, Philip

    2018-01-01

    Saudi Arabia has a unique environment in terms of its political, economic, legal and judicial aspects which have some anomalous characteristics that create challenges for corporate governance. Further challenges are presented by the current structure of listed companies and by Saudi Arabia’s Vision for 2030.1 This environment significantly influences the role of the board of directors in listed companies and increases its role in safeguarding the interests of different shareholders and stakeh...

  13. Standardization of the methodology used for fuel pressure drop evaluation to improve hydraulic calculation of heterogeneous cores

    International Nuclear Information System (INIS)

    Le Borgne, E.; Mattei, A.

    1994-01-01

    Continuous searching for safer and more efficient fuel, and diversification of fuel supply have as a consequence a possible change in the characteristics of the fuel assemblies used in nuclear reactors. By partially refueling cores with new assemblies, nuclear power plant operators are confronted with the problem of heterogeneous cores. The complexity of the problem increases as products diversify in isotopic concentration, types of alloy, size and shape of structure components. This document will focus strictly on the differences in hydraulic resistance related to the modifications in grid structures having no effect on DNB correlations. Although this is an extremely simplified approach to the problem, establishing data to evaluate the hydraulic compatibility between two different assemblies can be difficult, and if not controlled closely, can lead to false conclusions that may affect the operation and safety of the reactor. (authors). 2 figs

  14. National emission standards for hazardous air pollutants application for approval to construct rotary mode core-sampling truck and exhauster

    International Nuclear Information System (INIS)

    1993-05-01

    Characterization of wastes in the underground single-shell tanks and double-shell tanks on the Hanford Site is crucial in developing the final disposal options for the waste and closure strategy for the Hanford Site. Additionally, characterization of tank waste is important for the waste tank safety programs. The Hanford Federal Facility Agreement and Consent Order (also referred to as the Tri-Party Agreement) Milestone M-10-00 requires the obtaining and analyzing of at least two samples from each single-shell tank, and Milestone M-10-13 specifically requires the ability to sample hard saltcake. Existing equipment does not allow sampling of all single-shell tanks within established tank safety limits. Consequently, the US Department of Energy, Richland Operations Office has developed a rotary mode core-sampling system that uses nitrogen gas to cool and clear the drill bit. A rotary mode core-sampling truck will be used on approximately 80 single-shell tanks which contain saltcake wastes, and will provide crucial information on the contents of the tanks. This application is a request for approval to construct and operate the rotary mode core-sampling truck and exhauster in the 200 East and 200 West Area Tank Farms of the Hanford Site. This request is being made pursuant to 40 CFR 61, Subpart H

  15. Improvement of core monitoring code cecor by the virtual segmentation of the self powered neutron detector loaded at Korean Standard Nuclear Plant

    International Nuclear Information System (INIS)

    Choi, T.; Jung, Y.S.

    2006-01-01

    Full text: Full text: Korean Standard Nuclear Plant uses Self Powered Neutron Detectors (SPNDs) to measure the neutron flux in the reactor core. The SPND's height is 40 cm and is located axially at the five different positions and 45 radial places. The design code simulated a reactor core is calculated by segmentation of the core. The segmentation is called as 'node', of which size is normally 20 cm. The axial height of the detector is larger than that of the node, and the larger detector's height maybe product some error on the axially complex shape. The analysis with the detector's signals showed some errors at the non-cosine axial flux shape. In order to reduce the errors for the shape, we tried to divide the detector by introducing the virtual boundary in the detector. Then, each axially 5 detectors had two virtual segmentations respectively and the detector's signal was divided by the inputs. So the more virtual detector's signals were gotten, the more accurate axial shape was produced. The result with virtual segmentations in a detector gave less deviation than the case without virtual segmentation (the current model). After the middle of cycle at the initial core specially, the axial neutron flux shape is changed to the saddle type one. The current model gave some error in Root Mean Square (RMS) between the measured value and the calculated one. The virtual segmentation model gave the better agreement at that time

  16. Powered bone marrow biopsy procedures produce larger core specimens, with less pain, in less time than with standard manual devices

    Directory of Open Access Journals (Sweden)

    Larry J. Miller

    2011-07-01

    Full Text Available Bone marrow sampling remains essential in the evaluation of hematopoietic and many non-hematopoietic disorders. One common limitation to these procedures is the discomfort experienced by patients. To address whether a Powered biopsy system could reduce discomfort while providing equivalent or better results, we performed a randomized trial in adult volunteers. Twenty-six subjects underwent bilateral biopsies with each device. Core samples were obtained in 66.7% of Manual insertions; 100% of Powered insertions (P=0.002. Initial mean biopsy core lengths were 11.1±4.5 mm for the Manual device; 17.0±6.8 mm for the Powered device (P<0.005. Pathology assessment for the Manual device showed a mean length of 6.1±5.6 mm, width of 1.0±0.7 mm, and volume of 11.0±10.8 mm3. Powered device measurements were mean length of 15.3±6.1 mm, width of 2.0±0.3 mm, and volume of 49.1±21.5 mm3 (P<0.001. The mean time to core ejection was 86 seconds for Manual device; 47 seconds for the Powered device (P<0.001. The mean second look overall pain score was 33.3 for the Manual device; 20.9 for the Powered (P=0.039. We conclude that the Powered biopsy device produces superior sized specimens, with less overall pain, in less time.

  17. Recommendation for measuring clinical outcome in distal radius fractures: a core set of domains for standardized reporting in clinical practice and research.

    Science.gov (United States)

    Goldhahn, Jörg; Beaton, Dorcas; Ladd, Amy; Macdermid, Joy; Hoang-Kim, Amy

    2014-02-01

    Lack of standardization of outcome measurement has hampered an evidence-based approach to clinical practice and research. We adopted a process of reviewing evidence on current use of measures and appropriate theoretical frameworks for health and disability to inform a consensus process that was focused on deriving the minimal set of core domains in distal radius fracture. We agreed on the following seven core recommendations: (1) pain and function were regarded as the primary domains, (2) very brief measures were needed for routine administration in clinical practice, (3) these brief measures could be augmented by additional measures that provide more detail or address additional domains for clinical research, (4) measurement of pain should include measures of both intensity and frequency as core attributes, (5) a numeric pain scale, e.g. visual analogue scale or visual numeric scale or the pain subscale of the patient-reported wrist evaluation (PRWE) questionnaires were identified as reliable, valid and feasible measures to measure these concepts, (6) for function, either the Quick Disability of the arm, shoulder and hand questionnaire or PRWE-function subscale was identified as reliable, valid and feasible measures, and (7) a measure of participation and treatment complications should be considered core outcomes for both clinical practice and research. We used a sound methodological approach to form a comprehensive foundation of content for outcomes in the area of distal radius fractures. We recommend the use of symptom and function as separate domains in the ICF core set in clinical research or practice for patients with wrist fracture. Further research is needed to provide more definitive measurement properties of measures across all domains.

  18. Standard practice for acoustic emission examination of pressurized containers made of fiberglass reinforced plastic with balsa wood cores

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2007-01-01

    1.1 This practice covers guidelines for acoustic emission (AE) examinations of pressurized containers made of fiberglass reinforced plastic (FRP) with balsa cores. Containers of this type are commonly used on tank trailers for the transport of hazardous chemicals. 1.2 This practice is limited to cylindrical shape containers, 0.5 m [20 in.] to 3 m [120 in.] in diameter, of sandwich construction with balsa wood core and over 30 % glass (by weight) FRP skins. Reinforcing material may be mat, roving, cloth, unidirectional layers, or a combination thereof. There is no restriction with regard to fabrication technique or method of design. 1.3 This practice is limited to containers that are designed for less than 0.520 MPa [75.4 psi] (gage) above static pressure head due to contents. 1.4 This practice does not specify a time interval between examinations for re-qualification of a pressure container. 1.5 This practice is used to determine if a container is suitable for service or if follow-up NDT is needed before that...

  19. Development of a detailed BWR core thermal-hydraulic analysis method based on the Japanese post-BT standard using a best-estimate code

    International Nuclear Information System (INIS)

    Ono, H.; Mototani, A.; Kawamura, S.; Abe, N.; Takeuchi, Y.

    2004-01-01

    The post-BT standard is a new fuel integrity standard or the Atomic Energy Society of Japan that allows temporary boiling transition condition in the evaluation for BWR anticipated operational occurrences. For application of the post-BT standard to BWR anticipated operational occurrences evaluation, it is important to identify which fuel assemblies and which axial, radial positions of fuel rods have temporarily experienced the post-BT condition and to evaluates how high the fuel cladding temperature rise was and how long the dryout duration continued. Therefore, whole bundle simulation, in which each fuel assembly is simulated independently by one thermal-hydraulic component, is considered to be an effective analytical method. In the present study, a best-estimate thermal-hydraulic code, TRACG02, has been modified to extend it predictive capability by implementing the post-BT evaluation model such as the post-BT heat transfer correlation and rewetting correlation and enlarging the number of components used for BWR plant simulation. Based on new evaluation methods, BWR core thermal-hydraulic behavior has been analyzed for typical anticipated operational occurrence conditions. The location where boiling transition occurs and the severity of fuel assembly in the case of boiling transition conditions such as fuel cladding temperature, which are important factors in determining whether the reuse of the fuel assembly can be permitted, were well predicted by the proposed evaluation method. In summary, a new evaluation method for a detailed BWR core thermal-hydraulic analysis based on the post-BT standard of the Atomic Energy Society of Japan has been developed and applied to the evaluation of the post-BT standard during the actual BWR plant anticipated operational occurrences. (author)

  20. Response to the Point of View of Gregory B. Pauly, David M. Hillis, and David C. Cannatella, by the Anuran Subcommittee of the SSAR/HL/ASIH Scientific and Standard English Names List

    Science.gov (United States)

    Frost, Darrel R.; McDiarmid, Roy W.; Mendelson, Joseph R.

    2009-01-01

    The Point of View by Gregory Pauly, David Hillis, and David Cannatella misrepresents the motives and activities of the anuran subcommittee of the Scientific and Standard English Names Committee, contains a number of misleading statements, omits evidence and references to critical literature that have already rejected or superseded their positions, and cloaks the limitations of their nomenclatural approach in ambiguous language. Their Point of View is not about promoting transparency in the process of constructing the English Names list, assuring that its taxonomy is adequately reviewed, or promoting nomenclatural stability in any global sense. Rather, their Point of View focuses in large part on a single publication, The Amphibian Tree of Life, which is formally unrelated to the Standard English Names List, and promotes an approach to nomenclature mistakenly asserted by them to be compatible with both the International Code of Zoological Nomenclature and one of its competitors, the PhyloCode.

  1. Feasibility of using training cases from International Spinal Cord Injury Core Data Set for testing of International Standards for Neurological Classification of Spinal Cord Injury items

    DEFF Research Database (Denmark)

    Liu, N; Hu, Z W; Zhou, M W

    2014-01-01

    STUDY DESIGN: Descriptive comparison analysis. OBJECTIVE: To evaluate whether five training cases of International Spinal Cord Injury Core Data Set (ISCICDS) are appropriate for testing the facts within the International Standards for Neurological Classification of Spinal Cord Injury (ISNCSCI...... include information about zone of partial preservation, sensory score or motor score. CONCLUSION: Majority of the facts related to SL, ML and AIS are included in the five training cases of ISCICDS. Thus, using these training cases, it is feasible to test the above facts within the ISNCSCI. It is suggested...

  2. Development of a standard database for FBR core nuclear design (XI). Analysis of the Experimental Fast Reactor 'JOYO' MK-I start-up test and operation data

    International Nuclear Information System (INIS)

    Yokoyama, Kenji; Numata, Kazuyuki

    2000-03-01

    As a recent research, Japan Nuclear Cycle Development Institute (JNC) develops a database of integral data in addition to the JUPITER experiments, aiming at further improvement for accuracy and reliability. In this report, the authors describe the evaluation of the C/E values and the sensitivity analysis for the Experimental Fast Reactor 'JOYO' MK-I core. The minimal criticality, sodium void reactivity worth, fuel assembly worth and burn-up coefficient were analyzed. The results of both the minimal criticality and the fuel assembly worth, which were calculated by the standard analytical method for JUPITER experiments, agreed well with the measured values. On the other hand, the results of the sodium void reactivity worth have a tendency to overestimate. As for the burn-up coefficient, it was seen that the C/E values had a dispersion among the operation cycles. The authors judged that further investigation for the estimation of the experimental error will increase the applicability of the integral data to the adjusted library. Furthermore, sensitivity analyses for the minimal criticality, sodium void reactivity worth and fuel assembly worth showed the characteristics of 'JOYO' MK-I core in comparison with ZPPR-9 core of JUPITER experiments. (J.P.N.)

  3. 1968 Listing of Swimming Pool Equipment.

    Science.gov (United States)

    National Sanitation Foundation, Ann Arbor, MI. Testing Lab.

    An up-to-date listing of swimming pool equipment including--(1) companies authorized to display the National Sanitation Foundation seal of approval, (2) equipment listed as meeting NSF swimming pool equipment standards relating to diatomite type filters, (3) equipment listed as meeting NSF swimming pool equipment standard relating to sand type…

  4. Distribution and partitioning of heavy metals in estuarine sediment cores and implications for the use of sediment quality standards

    Directory of Open Access Journals (Sweden)

    K. L. Spencer

    2002-01-01

    Full Text Available Total metal concentrations in surface sediments and historically contaminated sediments were determined in sediment cores collected from three estuaries (Thames, Medway and Blackwater in south-east England. The partitioning behaviour of metals in these sediments was also determined using a sequential extraction scheme. These data were then compared with sediment quality values (SQVs to determine the potential ecotoxicological risk to sediment dwelling organisms. When total metal concentrations in surface sediments are examined, no risk to biota in any of the estuaries is indicated. However, when historically contaminated sediments at depth are also considered, risks to biota are apparent and are greatest for the Thames, followed by the Medway and then the Blackwater. This suggests that regulatory authorities should examine vertical metal profiles, particularly in estuaries that are experiencing low sediment accumulation rates where historically contaminated sediments are in the shallow sub-surface zone and where erosion or dredging activities may take place. When metal partitioning characteristics are also considered, the risk to biota is comparable for the Medway and the Blackwater with the potentially bioavailable fraction presenting no ecotoxicological risk. Conversely, over 70% of metals are labile in the Thames Estuary sediments and toxic effects are probable. This suggests that the application of SQVs using total sediment metal concentrations may over- or under-estimate the risk to biota in geochemically dissimilar estuarine sediments. Keywords: sediment quality values, estuarine sediments, metal contamination, partitioning, sequential extraction

  5. Standardization of the methodology used for fuel pressure drop evaluation to improve hydraulic calculation of heterogeneous cores

    International Nuclear Information System (INIS)

    Le Borgne, E.; Mattei, A.; Rome, M.; Rodriguez, J.M.

    2004-01-01

    The determination of hydraulic characteristics for fuel subassembly components is dependent on the hypotheses and the methodology considered. The results of hydraulic compatibility calculations using input data from different sources may thus be difficult to analyse, and their reliability will consequently be reduced. Electricite de France (EDF) and Commissariat a l'Energie Atomique (CEA) have initiated a common program aiming at controlling the consequences of such a situation, increasing the reliability of the values used in the hydraulic compatibility calculations, and proposing a standardization of the operating procedures. In a first step, this program is based on the measurements performed in the CEA HERMES P facility. Extension of this program is expected to the equivalent experimental facilities for which sufficient information will be made available. (author)

  6. Graduate Periodontics Programs' Integration of Implant Provisionalization in Core Curricula: Implementation of CODA Standard 4-10.2.d.

    Science.gov (United States)

    Barwacz, Christopher A; Pantzlaff, Ed; Allareddy, Veerasathpurush; Avila-Ortiz, Gustavo

    2017-06-01

    The aim of this descriptive study was to provide an overview of the status of implementation of Commission on Dental Accreditation (CODA) Standard 4-10.2.d (Provisionalization of Dental Implants) by U.S. graduate periodontics programs since its introduction in 2013. Surveys were sent in May 2015 to 56 accredited postdoctoral periodontics program directors to ascertain program director characteristics; status of planning, implementation, and curriculum resulting from adoption of Standard 4-10.2.d; preferred clinical protocols for implant provisionalization; interdisciplinary educational collaborators; and competency assessment mechanisms. The survey response rate was 52% (N=29); the majority were male, aged 55 or older, and had held their position for less than ten years. Among the responding programs, 93% had formal educational curricula established in implant provisionalization. Graduate periodontics (96%) and prosthodontics (63%) faculty members were predominantly involved with curriculum planning. Of these programs, 96% used immediate implant provisionalization, with direct (chairside) provisionalization protocols (86%) being preferred over indirect protocols (14%) and polyethylethylketone provisional abutments (75%) being preferred to titanium (25%) provisional abutments. Straight and concave transmucosal emergence profile designs (46% each) were preferred in teaching, with only 8% of programs favoring convex transmucosal profiles. A majority of responding programs (67%) lacked protocols for communicating to the restorative referral a mechanism to duplicate the mature peri-implant mucosal architecture. Regional location did not play a significant role in any educational component related to implant provisionalization for these graduate periodontal programs. Overall, this study found that a clear majority of graduate periodontics programs had established formal curricula related to implant provisionalization, with substantial clinical and philosophical consensus

  7. Core Values | NREL

    Science.gov (United States)

    Core Values Core Values NREL's core values are rooted in a safe and supportive work environment guide our everyday actions and efforts: Safe and supportive work environment Respect for the rights physical and social environment Integrity Maintain the highest standard of ethics, honesty, and integrity

  8. Creating Next Generation Teacher Preparation Programs to Support Implementation of the Next Generation Science Standards and Common Core State Standards in K-12 Schools: An Opportunity for the Earth and Space Sciences

    Science.gov (United States)

    Geary, E. E.; Egger, A. E.; Julin, S.; Ronca, R.; Vokos, S.; Ebert, E.; Clark-Blickenstaff, J.; Nollmeyer, G.

    2015-12-01

    A consortium of two and four year Washington State Colleges and Universities in partnership with Washington's Office of the Superintendent of Public Instruction (OSPI), the Teachers of Teachers of Science, and Teachers of Teachers of Mathematics, and other key stakeholders, is currently working to improve science and mathematics learning for all Washington State students by creating a new vision for STEM teacher preparation in Washington State aligned with the Next Generation Science Standards (NGSS) and the Common Core State Standards (CCSS) in Mathematics and Language Arts. Specific objectives include: (1) strengthening elementary and secondary STEM Teacher Preparation courses and curricula, (2) alignment of STEM teacher preparation programs across Washington State with the NGSS and CCSS, (3) development of action plans to support implementation of STEM Teacher Preparation program improvement at Higher Education Institutions (HEIs) across the state, (4) stronger collaborations between HEIs, K-12 schools, government agencies, Non-Governmental Organizations, and STEM businesses, involved in the preparation of preservice STEM teachers, (5) new teacher endorsements in Computer Science and Engineering, and (6) development of a proto-type model for rapid, adaptable, and continuous improvement of STEM teacher preparation programs. A 2015 NGSS gap analysis of teacher preparation programs across Washington State indicates relatively good alignment of courses and curricula with NGSS Disciplinary Core Ideas and Scientific practices, but minimal alignment with NGSS Engineering practices and Cross Cutting Concepts. Likewise, Computer Science and Sustainability ideas and practices are not well represented in current courses and curricula. During the coming year teams of STEM faculty, education faculty and administrators will work collaboratively to develop unique action plans for aligning and improving STEM teacher preparation courses and curricula at their institutions.

  9. An evaluation of the Essential Medicines List, Standard Treatment Guidelines and prescribing restrictions, as an integrated strategy to enhance quality, efficacy and safety of and improve access to essential medicines in Papua New Guinea.

    Science.gov (United States)

    Joshua, Isaac B; Passmore, Phillip R; Sunderland, Bruce V

    2016-05-01

    The World Health Organization (WHO) has advocated the development and use of country specific Standard Treatment Guidelines (STGs) and Essential Medicines Lists (EML) as strategies to promote the rational use of medicines. When implemented effectively STGs offer many health advantages. Papua New Guinea (PNG) has official STGs and a Medical and Dental Catalogue (MDC) which serves as a national EML for use at different levels of health facilities. This study evaluated consistency between the PNG Adult STGs (2003 and 2012) and those for children (2005 and 2011) with respect to the MDCs (2002, 2012) for six chronic and/or acute diseases: asthma, arthritis, diabetes, hypertension, pneumonia and psychosis. Additionally, the potential impact of prescriber level restrictions on rational medicines use for patient's living in rural areas, where no medical officer is present, was evaluated. Almost all drugs included in the STGs for each disease state evaluated were listed in the MDCs. However, significant discrepancies occurred between the recommended treatments in the STGs with the range of related medicines listed in the MDCs. Many medicines recommended in the STGs for chronic diseases had prescriber level restrictions hindering access for most of the PNG population who live in rural and remote areas. In addition many more medicines were listed in the MDCs which are commonly used to treat arthritis, high blood pressure and psychosis than were recommended in the STGs contributing to inappropriate prescribing. We recommend the public health and rational use of medicines deficiencies associated with these findings are addressed requiring: reviewing prescriber level restrictions; updating the STGs; aligning the MDC to reflect recommendations in the STGs; establishing the process where the MDC would automatically be updated based on any changes made to the STGs; and developing STGs for higher levels of care. © The Author 2015. Published by Oxford University Press. All rights

  10. Accounting standards

    NARCIS (Netherlands)

    Stellinga, B.; Mügge, D.

    2014-01-01

    The European and global regulation of accounting standards have witnessed remarkable changes over the past twenty years. In the early 1990s, EU accounting practices were fragmented along national lines and US accounting standards were the de facto global standards. Since 2005, all EU listed

  11. Standardization Documents

    Science.gov (United States)

    2011-08-01

    Specifications and Standards; Guide Specifications; CIDs; and NGSs . Learn. Perform. Succeed. STANDARDIZATION DOCUMENTS Federal Specifications Commercial...national or international standardization document developed by a private sector association, organization, or technical society that plans ...Maintain lessons learned • Examples: Guidance for application of a technology; Lists of options Learn. Perform. Succeed. DEFENSE HANDBOOK

  12. Creating a Learning Continuum: A Critical Look at the Intersection of Prior Knowledge, Outdoor Education, and Next Generation Science Standards Disciplinary Core Ideas and Practices

    Science.gov (United States)

    Schlobohm, Trisha Leigh

    Outdoor School is a cherished educational tradition in the Portland, OR region. This program's success is attributed to its presumed ability to positively impact affective and cognitive student outcomes. Residential programs such as Outdoor School are considered to be an important supplement to the classroom model of learning because they offer an authentic, contextually rich learning environment. References to relevant literature support the idea that student gains in affective and cognitive domains occur as a result of the multi-sensory, enjoyable, hands-on nature of outdoor learning. The sample population for this study was 115 sixth graders from a demographically diverse Portland, OR school district. This study used an instrument developed by the Common Measures System that was administered to students as part of Outdoor School's professional and program development project. The affective student outcome data measured by the Common Measures instrument was complemented by a formative assessment probe ascertaining prior knowledge of the definition of plants and field notes detailing Field Study instructor lesson content. This first part of this study examined the changes that take place in students' attitudes toward science as a result of attending Outdoor School. The second part took a look at how Outdoor School instruction in the Plants field study aligned with NGSS MS-LS Disciplinary Core Ideas and Practices. The third section of the study compared how Outdoor School instruction in the Plants Field Study and students' prior knowledge of what defines a plant aligned with NGSS MS-LS DCIs. The intent of the research was to arrive at a more nuanced understanding of how students' attitudes toward science are influenced by participating in an outdoor education program and contribute to the development of a continuum between classroom and outdoor school learning using Next Generation Science Standards Disciplinary Core Ideas and Practices as a framework. Results of

  13. The application of “fair value” accounting standards to the income statements of companies listed in the Portuguese Stock Index-20 (PSI-20)

    OpenAIRE

    Tiago Cardão-Pito; Jorge Barros

    2016-01-01

    Purpose – “Fair value” accounting standards are not consensual. Supporters claim that they offer a methodology to find the “correct” value of accounting items, whereas critics contend that “fair value” accounting reduces the reliability of financial statements through a complex and unpractical method based on subjective information. Still, the impacts of “fair value” accounting upon taxes and public revenues are rarely discussed. Design/methodology/approach – The Portuguese case allows...

  14. The STAPL pList

    KAUST Repository

    Tanase, Gabriel

    2010-01-01

    We present the design and implementation of the stapl pList, a parallel container that has the properties of a sequential list, but allows for scalable concurrent access when used in a parallel program. The Standard Template Adaptive Parallel Library (stapl) is a parallel programming library that extends C++ with support for parallelism. stapl provides a collection of distributed data structures (pContainers) and parallel algorithms (pAlgorithms) and a generic methodology for extending them to provide customized functionality. stapl pContainers are thread-safe, concurrent objects, providing appropriate interfaces (e.g., views) that can be used by generic pAlgorithms. The pList provides stl equivalent methods, such as insert, erase, and splice, additional methods such as split, and efficient asynchronous (non-blocking) variants of some methods for improved parallel performance. We evaluate the performance of the stapl pList on an IBM Power 5 cluster and on a CRAY XT4 massively parallel processing system. Although lists are generally not considered good data structures for parallel processing, we show that pList methods and pAlgorithms (p-generate and p-partial-sum) operating on pLists provide good scalability on more than 103 processors and that pList compares favorably with other dynamic data structures such as the pVector. © 2010 Springer-Verlag.

  15. Assessing the Genetics Content in the Next Generation Science Standards.

    Directory of Open Access Journals (Sweden)

    Katherine S Lontok

    Full Text Available Science standards have a long history in the United States and currently form the backbone of efforts to improve primary and secondary education in science, technology, engineering, and math (STEM. Although there has been much political controversy over the influence of standards on teacher autonomy and student performance, little light has been shed on how well standards cover science content. We assessed the coverage of genetics content in the Next Generation Science Standards (NGSS using a consensus list of American Society of Human Genetics (ASHG core concepts. We also compared the NGSS against state science standards. Our goals were to assess the potential of the new standards to support genetic literacy and to determine if they improve the coverage of genetics concepts relative to state standards. We found that expert reviewers cannot identify ASHG core concepts within the new standards with high reliability, suggesting that the scope of content addressed by the standards may be inconsistently interpreted. Given results that indicate that the disciplinary core ideas (DCIs included in the NGSS documents produced by Achieve, Inc. clarify the content covered by the standards statements themselves, we recommend that the NGSS standards statements always be viewed alongside their supporting disciplinary core ideas. In addition, gaps exist in the coverage of essential genetics concepts, most worryingly concepts dealing with patterns of inheritance, both Mendelian and complex. Finally, state standards vary widely in their coverage of genetics concepts when compared with the NGSS. On average, however, the NGSS support genetic literacy better than extant state standards.

  16. Assessing the Genetics Content in the Next Generation Science Standards.

    Science.gov (United States)

    Lontok, Katherine S; Zhang, Hubert; Dougherty, Michael J

    2015-01-01

    Science standards have a long history in the United States and currently form the backbone of efforts to improve primary and secondary education in science, technology, engineering, and math (STEM). Although there has been much political controversy over the influence of standards on teacher autonomy and student performance, little light has been shed on how well standards cover science content. We assessed the coverage of genetics content in the Next Generation Science Standards (NGSS) using a consensus list of American Society of Human Genetics (ASHG) core concepts. We also compared the NGSS against state science standards. Our goals were to assess the potential of the new standards to support genetic literacy and to determine if they improve the coverage of genetics concepts relative to state standards. We found that expert reviewers cannot identify ASHG core concepts within the new standards with high reliability, suggesting that the scope of content addressed by the standards may be inconsistently interpreted. Given results that indicate that the disciplinary core ideas (DCIs) included in the NGSS documents produced by Achieve, Inc. clarify the content covered by the standards statements themselves, we recommend that the NGSS standards statements always be viewed alongside their supporting disciplinary core ideas. In addition, gaps exist in the coverage of essential genetics concepts, most worryingly concepts dealing with patterns of inheritance, both Mendelian and complex. Finally, state standards vary widely in their coverage of genetics concepts when compared with the NGSS. On average, however, the NGSS support genetic literacy better than extant state standards.

  17. DisLexList

    DEFF Research Database (Denmark)

    2013-01-01

    DisLexList is a simple analysis script for the generation of lists of lexemes in discourses, and may be used as a tool in discourse analysis (critical and otherwise). DisLexList is, in its current state, able to generate simple word lists and lexeme list based on output from VISL's flat structure...

  18. Utah's New Mathematics Core

    Science.gov (United States)

    Utah State Office of Education, 2011

    2011-01-01

    Utah has adopted more rigorous mathematics standards known as the Utah Mathematics Core Standards. They are the foundation of the mathematics curriculum for the State of Utah. The standards include the skills and understanding students need to succeed in college and careers. They include rigorous content and application of knowledge and reflect…

  19. Proteomics Core

    Data.gov (United States)

    Federal Laboratory Consortium — Proteomics Core is the central resource for mass spectrometry based proteomics within the NHLBI. The Core staff help collaborators design proteomics experiments in a...

  20. The program RADLST [Radiation Listing

    International Nuclear Information System (INIS)

    Burrows, T.W.

    1988-01-01

    The program RADLST (Radiation Listing) is designed to calculate the nuclear and atomic radiations associated with the radioactive decay of nuclei. It uses as its primary input nuclear decay data in the Evaluated Nuclear Structure Data File (ENSDF) format. The code is written in FORTRAN 77 and, with a few exceptions, is consistent with the ANSI standard. 65 refs

  1. Core principles of evolutionary medicine

    Science.gov (United States)

    Grunspan, Daniel Z; Nesse, Randolph M; Barnes, M Elizabeth; Brownell, Sara E

    2018-01-01

    Abstract Background and objectives Evolutionary medicine is a rapidly growing field that uses the principles of evolutionary biology to better understand, prevent and treat disease, and that uses studies of disease to advance basic knowledge in evolutionary biology. Over-arching principles of evolutionary medicine have been described in publications, but our study is the first to systematically elicit core principles from a diverse panel of experts in evolutionary medicine. These principles should be useful to advance recent recommendations made by The Association of American Medical Colleges and the Howard Hughes Medical Institute to make evolutionary thinking a core competency for pre-medical education. Methodology The Delphi method was used to elicit and validate a list of core principles for evolutionary medicine. The study included four surveys administered in sequence to 56 expert panelists. The initial open-ended survey created a list of possible core principles; the three subsequent surveys winnowed the list and assessed the accuracy and importance of each principle. Results Fourteen core principles elicited at least 80% of the panelists to agree or strongly agree that they were important core principles for evolutionary medicine. These principles over-lapped with concepts discussed in other articles discussing key concepts in evolutionary medicine. Conclusions and implications This set of core principles will be helpful for researchers and instructors in evolutionary medicine. We recommend that evolutionary medicine instructors use the list of core principles to construct learning goals. Evolutionary medicine is a young field, so this list of core principles will likely change as the field develops further. PMID:29493660

  2. Standard Materials. A Descriptive List with Prices.

    Science.gov (United States)

    1962-03-12

    10.00 1056 Cupric Cyclohexanebutyrate ------------ Cu --------------------------- 16.0 5 10.00 1057 Dibutyltin Bis(2-ethylhexanoate) -------- Sn...pH (approx.) 9.2 ---------------------- 30 2.50 188 Potassium hydrogen tartrate ------------ pH (approx.) 3.6-----------------------60

  3. Computer Science and Technology Publications. NBS Publications List 84.

    Science.gov (United States)

    National Bureau of Standards (DOC), Washington, DC. Inst. for Computer Sciences and Technology.

    This bibliography lists publications of the Institute for Computer Sciences and Technology of the National Bureau of Standards. Publications are listed by subject in the areas of computer security, computer networking, and automation technology. Sections list publications of: (1) current Federal Information Processing Standards; (2) computer…

  4. Property Testing on Linked Lists

    DEFF Research Database (Denmark)

    Afshani, Peyman; Matulef, Kevin; Wilkinson, Bryan Thomas

    2013-01-01

    We define a new property testing model for algorithms that do not have arbitrary query access to the input, but must instead traverse it in a manner that respects the underlying data structure in which it is stored. In particular, we consider the case when the underlying data structure is a linked...... list, and the testing algorithm is allowed to either sample randomly from the list, or walk to nodes that are adjacent to those already visited. We study the well-known monotonicity testing problem in this model, and show that (n13) queries are both necessary and sufficient to distinguish whether...... a list is sorted (monotone increasing) versus a constant distance from sorted. Our bound is strictly greater than the (logn) queries required in the standard testing model, that allows element access indexed by rank, and strictly less than the (n12) queries required by a weak model that only allows...

  5. The Uncommon Core

    Science.gov (United States)

    Ohler, Jason

    2013-01-01

    This author contends that the United States neglects creativity in its education system. To see this, he states, one may look at the Common Core State Standards. If one searches the English Language Arts and Literacy standards for the words "creative," "innovative," and "original"--and any associated terms, one will…

  6. Monte Carlo Particle Lists: MCPL

    DEFF Research Database (Denmark)

    Kittelmann, Thomas; Klinkby, Esben Bryndt; Bergbäck Knudsen, Erik

    2017-01-01

    A binary format with lists of particle state information, for interchanging particles between various Monte Carlo simulation applications, is presented. Portable C code for file manipulation is made available to the scientific community, along with converters and plugins for several popular...... simulation packages. Program summary: Program Title: MCPL. Program Files doi: http://dx.doi.org/10.17632/cby92vsv5g.1 Licensing provisions: CC0 for core MCPL, see LICENSE file for details. Programming language: C and C++ External routines/libraries: Geant4, MCNP, McStas, McXtrace Nature of problem: Saving...

  7. Can Psychiatric Rehabilitation Be Core to CORE?

    Science.gov (United States)

    Olney, Marjorie F.; Gill, Kenneth J.

    2016-01-01

    Purpose: In this article, we seek to determine whether psychiatric rehabilitation principles and practices have been more fully incorporated into the Council on Rehabilitation Education (CORE) standards, the extent to which they are covered in four rehabilitation counseling "foundations" textbooks, and how they are reflected in the…

  8. Acronym master list

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    This document is a master list of acronyms and other abbreviations that are used by or could be useful to, the personnel at Los Alamos National Laboratory. Many specialized and well-known abbreviations are not included in this list.

  9. National List of Beaches

    Data.gov (United States)

    U.S. Environmental Protection Agency — EPA has published a list of coastal recreation waters adjacent to beaches (or similar points of access) used by the public in the U.S. The list, required by the...

  10. Retrofitting Listed Buildings

    DEFF Research Database (Denmark)

    Rasmussen, Torben Valdbjørn

    2011-01-01

    The paper presents a case study where the energy demand for a listed building constructed in 1900 is reduced. Many older buildings are listed and have restrictions that include the entire building or that include only its exterior. For the building presented, only its exterior facade is listed. T...

  11. Prime mission results of the dual-frequency precipitation radar on the global precipitation measurement core spacecraft and the version 5 GPM standard products

    Science.gov (United States)

    Furukawa, K.; Nio, T.; Oki, R.; Kubota, T.; Iguchi, T.

    2017-09-01

    The Dual-frequency Precipitation Radar (DPR) on the Global Precipitation Measurement (GPM) core satellite was developed by Japan Aerospace Exploration Agency (JAXA) and National Institute of Information and Communications Technology (NICT). The objective of the GPM mission is to observe global precipitation more frequently and accurately. The GPM core satellite is a joint product of National Aeronautics and Space Administration (NASA), JAXA and NICT. NASA developed the satellite bus and the GPM Microwave Imager (GMI), and JAXA and NICT developed the DPR. The inclination of the GPM core satellite is 65 degrees, and the nominal flight altitude is 407 km. The non-sunsynchronous circular orbit is necessary for measuring the diurnal change of rainfall. The DPR consists of two radars, which are Ku-band precipitation radar (KuPR) and Ka-band precipitation radar (KaPR). GPM core observatory was successfully launched by H2A launch vehicle on Feb. 28, 2014. DPR orbital check out was completed in May 2014. DPR products were released to the public on Sep. 2, 2014 and Normal Observation Operation period was started. JAXA is continuing DPR trend monitoring, calibration and validation operations to confirm that DPR keeps its function and performance on orbit. The results of DPR trend monitoring, calibration and validation show that DPR kept its function and performance on orbit during the 3 years and 2 months prime mission period. The DPR Prime mission period was completed in May 2017. The version 5 GPM products were released to the public in 2017. JAXA confirmed that GPM/DPR total system performance and the GPM version 5 products achieved the success criteria and the performance indicators that were defined for the JAXA GPM/DPR mission.

  12. Title III List of Lists -- Data Tool

    Data.gov (United States)

    U.S. Environmental Protection Agency — This list was prepared to help firms handling chemicals determine whether they need to submit reports under sections 302, 304, or 313 of the Emergency Planning and...

  13. Common Core State Standards for English Language Arts & Literacy in History/Social Studies, Science, and Technical Subjects. Appendix B: Text Exemplars and Sample Performance Tasks

    Science.gov (United States)

    Common Core State Standards Initiative, 2010

    2010-01-01

    The text samples presented in this document primarily serve to exemplify the level of complexity and quality that the Standards require all students in a given grade band to engage with. Additionally, they are suggestive of the breadth of texts that students should encounter in the text types required by the Standards. The choices should serve as…

  14. Stereotaxic percutaneous core biopsy versus surgical biopsy of nonpalpable breast lesions using a standard mammographic table with an add-on device

    International Nuclear Information System (INIS)

    Levin, M.F.; Papoff, W.J.; Doan, L.; Eliasziw, M.

    2001-01-01

    To determine the accuracy of using a regular mammographic table with an add-on device for biopsy of nonpalpable breast lesions in women in a community hospital setting. During a 3-year period, 70 consenting women (39-80 years of age) with a nonpalpable mammographically suspicious lesion on routine screening mammography underwent 14-gauge automated percutaneous core biopsies, immediate needle localization and lumpectomy. The needle and surgical biopsy results were independently classified into 1 of 5 categories: cancer, fibroadenomal fibrocystic change, normal or other. The procedure was well tolerated, and all core specimens yielded adequate tissue for pathologic evaluation. There were 3 episodes of vasovagal reaction. There was complete agreement in histologic findings in 64 cases (91%), including 22 of 24 cancers (92%). The overall agreement for categorizing lesions was 91% (k 0.88), and there was 97% agreement (k = 0.94) for the classification of cancer versus benign lesion. The results are similar to those of studies performed with dedicated prone equipment. Stereotaxic core biopsies can be done safely and accurately in a community hospital setting with relatively inexpensive nondedicated mammographic equipment. (author)

  15. Stereotaxic percutaneous core biopsy versus surgical biopsy of nonpalpable breast lesions using a standard mammographic table with an add-on device

    Energy Technology Data Exchange (ETDEWEB)

    Levin, M.F.; Papoff, W.J.; Doan, L.; Eliasziw, M. [St. Thomas-Elgin General Hospital, St. Thomas, Ontario (Canada)

    2001-02-01

    To determine the accuracy of using a regular mammographic table with an add-on device for biopsy of nonpalpable breast lesions in women in a community hospital setting. During a 3-year period, 70 consenting women (39-80 years of age) with a nonpalpable mammographically suspicious lesion on routine screening mammography underwent 14-gauge automated percutaneous core biopsies, immediate needle localization and lumpectomy. The needle and surgical biopsy results were independently classified into 1 of 5 categories: cancer, fibroadenomal fibrocystic change, normal or other. The procedure was well tolerated, and all core specimens yielded adequate tissue for pathologic evaluation. There were 3 episodes of vasovagal reaction. There was complete agreement in histologic findings in 64 cases (91%), including 22 of 24 cancers (92%). The overall agreement for categorizing lesions was 91% (k 0.88), and there was 97% agreement (k = 0.94) for the classification of cancer versus benign lesion. The results are similar to those of studies performed with dedicated prone equipment. Stereotaxic core biopsies can be done safely and accurately in a community hospital setting with relatively inexpensive nondedicated mammographic equipment. (author)

  16. Comparison of Transport Calculation Between 2D/1D synthesis and RAPTOR-M3G at Core Barrel of Korea Standard Nuclear Plant(KSNP), OPR-1000

    Energy Technology Data Exchange (ETDEWEB)

    Maeng, Young Jae; Kim, Byoung Chul; Lim, Mi Joung; Kim, Kyung Sik; Jeon, Young Kyou [Korea Reactor Integrity Surveillance Technology, Daejeon (Korea, Republic of); Yoo, Chun Sung [Korea Atomic Energy Research Institutes, Daejeon (Korea, Republic of)

    2013-10-15

    The DORT code for 2D/1D synthesis has been actively applied to calculate the fast neutron (E>1.0MeV) fluence exposure of RPV. RAPTOR-M3G code is also applied for the comparison of 2D/1D synthesis, and it was found that 2D/1D synthesis method generally provided more conservative results than RAPTOR-M3G at both RPV and surveillance capsule locations. As a result, definitely RAPTOR-M3G for 3D calculation must apply for accurate evaluation of the integrity and ageing of RPV and internal structures. Therefore, the purpose of this paper is to compare the differences in terms of geometric aspect of KSNP model between 2D/1D synthesis and RAPTOR-M3G at core barrel area. 2D/1D synthesis method shows still higher results at the shortest distance of bypass water region. The reason is that 2D/1D synthesis method has excessive conservatism because of having just one model of R-θ and R-Z separately. Angles (5, 25, 45, 65 and 90 degrees) that RAPTOR-M3G results are higher than 2D/1D synthesis results seem to have almost regular interval. The reason can be that neutron flux to reach to barrel is affected by the nearest core definitely and all of near core areas including bypass water. RAPTOR-M3G performing 3D calculation can be applied to various reactor structures, because the code can simulate the model realistically and reasonably in geometric view points. Understanding the phenomenon that 45 degree shows downward peak, in spite of baffle corner location, remains.

  17. Comparison of Transport Calculation Between 2D/1D synthesis and RAPTOR-M3G at Core Barrel of Korea Standard Nuclear Plant(KSNP), OPR-1000

    International Nuclear Information System (INIS)

    Maeng, Young Jae; Kim, Byoung Chul; Lim, Mi Joung; Kim, Kyung Sik; Jeon, Young Kyou; Yoo, Chun Sung

    2013-01-01

    The DORT code for 2D/1D synthesis has been actively applied to calculate the fast neutron (E>1.0MeV) fluence exposure of RPV. RAPTOR-M3G code is also applied for the comparison of 2D/1D synthesis, and it was found that 2D/1D synthesis method generally provided more conservative results than RAPTOR-M3G at both RPV and surveillance capsule locations. As a result, definitely RAPTOR-M3G for 3D calculation must apply for accurate evaluation of the integrity and ageing of RPV and internal structures. Therefore, the purpose of this paper is to compare the differences in terms of geometric aspect of KSNP model between 2D/1D synthesis and RAPTOR-M3G at core barrel area. 2D/1D synthesis method shows still higher results at the shortest distance of bypass water region. The reason is that 2D/1D synthesis method has excessive conservatism because of having just one model of R-θ and R-Z separately. Angles (5, 25, 45, 65 and 90 degrees) that RAPTOR-M3G results are higher than 2D/1D synthesis results seem to have almost regular interval. The reason can be that neutron flux to reach to barrel is affected by the nearest core definitely and all of near core areas including bypass water. RAPTOR-M3G performing 3D calculation can be applied to various reactor structures, because the code can simulate the model realistically and reasonably in geometric view points. Understanding the phenomenon that 45 degree shows downward peak, in spite of baffle corner location, remains

  18. Model for the probability of core uncovery in loss of offsite power induced accidents, as applied in the Probabilistic Safety Study for ENEL PWR standard power plant

    International Nuclear Information System (INIS)

    Silvestri, E.; Serra, S.; Paddleford, D.F.

    1985-01-01

    This paper discusses one particular aspect of the Probabilistic Safety Study conducted for the Italian reference PWR or Progetto Unificato Nucleare (PUN) design. The event scenario addressed involves the loss of offsite power (LOOSP) initiating event in conjunction with an independent loss of certain support systems (to the exclusion of the total independent loss of on-site power which is treated similarly in a separate event tree). An event tree is developed to address the potential for a consequential small LOCA due to reactor coolant pump (RCP) seal failure under conditions of inadequate seal cooling and the subsequent potential for core uncovery should emergency systems be unavailable and not recovered in adequate time. The event scenario and the quantification methodology used are described. Results and sensitivities are presented

  19. A detailed research study of learning and teaching core chemical engineering to a high standard in a mixed-ability small class in industry

    Science.gov (United States)

    Davey, Kenneth

    2017-11-01

    A detailed study of learning and teaching (L&T) of chemical engineering distillation to a mixed-ability small class of 13 students who are ordinarily full-time in-house employees in industry is reported. The course consisted of 9 × 2-h lectures (18 hours) and 9 × 2-h tutorials (18 hours). It was delivered over nine business days in situ in an established distillery. The purpose was to (re)learn core distillation of ethanol-water mixes at the level of higher education of a bachelor programme. There was 90% broad agreement that the course encouraged more learning. Students (40%) felt the course was too mathematical, however. Pointedly, there was good agreement (63%) that the course stimulated communication with each other professionally, and customers of the distillery. Results overall provide good evidence that students valued their L&T. The experimental design(s) could be readily applied to a range of fields of knowledge.

  20. CRNL library serials list

    International Nuclear Information System (INIS)

    Alburger, T.P.

    1982-04-01

    A list of 1900 serial publications (periodicals, society transactions and proceedings, annuals and directories, indexes, newspapers, etc.) is presented with volumes and years held by the Main Library. This library is the largest in AECL as well as one of the largest scientific and technical libraries in North America, and functions as a Canadian resource for nuclear information. A main alphabetical list is followed by broad subject field lists representing research interests, and lists of abstract and index serials, general bibliographic serials, conference indexes, press releases, English translations, and original language journals

  1. Retail Shopping Lists

    DEFF Research Database (Denmark)

    Schmidt, Marcus

    2012-01-01

    categories. An association between the frequency of a brand's appearance on lists and the amount of money spent on advertising the brand could not be found. A strong link between brands, prices and store names is revealed. Price in the majority of cases refers to brands rather than to product categories......The paper addresses consumers' shopping lists. The current study is based on a survey of 871 lists collected at retail grocery stores. Most items on shopping lists appear on the product category level rather than the brand level. The importance of the brand level varies considerably across product...

  2. Transformer core

    NARCIS (Netherlands)

    Mehendale, A.; Hagedoorn, Wouter; Lötters, Joost Conrad

    2008-01-01

    A transformer core includes a stack of a plurality of planar core plates of a magnetically permeable material, which plates each consist of a first and a second sub-part that together enclose at least one opening. The sub-parts can be fitted together via contact faces that are located on either side

  3. Transformer core

    NARCIS (Netherlands)

    Mehendale, A.; Hagedoorn, Wouter; Lötters, Joost Conrad

    2010-01-01

    A transformer core includes a stack of a plurality of planar core plates of a magnetically permeable material, which plates each consist of a first and a second sub-part that together enclose at least one opening. The sub-parts can be fitted together via contact faces that are located on either side

  4. Ultra-Performance Liquid Chromatography Hyphenated with Quadrupole-Orbitrap Mass Spectrometry for Simultaneous Determination of Necine-Core-Structure Pyrrolizidine Alkaloids in Crotalaria sessiliflora L. without all Corresponding Standards.

    Science.gov (United States)

    Zhang, Wei; Huai, Wenbei; Zhang, Yi; Shen, Jincan; Tang, Xunyou; Xie, Xiujuan; Wang, Ke; Fan, Huajun

    2017-09-01

    Crotalaria sessiliflora L. is a Chinese traditional herb for treatment of cutaneum carcinoma and cervical carcinoma. In addition to monocrotaline, coexisting pyrrolizidine alkaloids (PAs) also require further quantification for quality control and pharmaceutical uses of the herb. To establish a UPLC-Q-Orbitrap/MS method of simultaneous determination of coexisting PAs with same parent structure for quality control and comprehensive researches of Crotalaria sessiliflora L. PAs in Crotalaria sessiliflora L. were analysed by UPLC-Q-Orbitrap/MS method. Coexisting PAs were identified by mass data of full MS-dd-MS 2 based on the characteristic fragmentation pattern and necine-core structure. Moreover, quantification of PAs was conducted by parallel reaction monitoring (PRM) mode using m/z 138, m/z 120 and m/z 94 from identical necine-core structure as quantitative ions with single monocrotaline standard for accurate calibration. Five PAs, named monocrotaline, retrorsine, senecionine, integerrimine, O-9-angeloylretronecine, were indentified and confirmed. Quantitative ions of m/z 138, m/z 120 and m/z 94 were used for quantification of PAs containing the necine-core structure in Crotalaria sessiliflora L. The results demonstrated that contents, precision and recoveries of the five PAs mentioned earlier were respectively 3.307-30.35 μg/g, 1.1-4.5% and 88.91-92.33% while using m/z 120 as the best quantitative ion. The UPLC-Q-Orbitrap/MS method was established for simultaneous determination of five PAs in Crotalaria sessiliflora L. without all corresponding standards, and was proved that it was simple, convenient and effective for comprehensive quality control and pharmaceutical uses. Copyright © 2017 John Wiley & Sons, Ltd. Copyright © 2017 John Wiley & Sons, Ltd.

  5. DEVELOPMENT OF CORES FOR MINI MOTORS FROM LAMINATED SHEETS OF ELECTRIC STEEL ABNT (Brazilian Association of Technical Standards 35F 420M WITH THERMAL TREATMENT

    Directory of Open Access Journals (Sweden)

    Halston Mozetic

    2016-06-01

    Full Text Available The purposes of this paper were to study the thermal treatment of Fe-Si sheet, as well as the sheet cutting concerning the topology of a mini stepper motor and mini motor simulation using finite element software. The research consisted of the execution of an "Inductive Reheating" thermal treatment of Iron Silicon sheets, NM71-2000/35F 420M with GNO (Grain Non Oriented, and 0.35mm width. The new technique has the benefit of minimizing magnetic losses produced by the cut on the edge of electric sheets. To carry out the process, the system includes a furnace, an induction coil, and a power supply that, when activated in a controlled way, causes relevant changes to the crystalline structure of the material. Related to the cut of the sheets, the topology of a three phase mini stepper motor was considered. The sheets were initially cut using the geometry of the rotor and stator cores. Firstly, a die cutting process was used and later a wire electroerosion cutting process was employed, which provided parts with excellent finishing. Finally, the mini motor was simulated using the finite element software FEMM 4.2 in order to analyze the airgap flow and torque development of the axis end, in comparison to a solid block of the same material (Fe-Si

  6. ACQUISITIONS LIST, MAY 1966.

    Science.gov (United States)

    Harvard Univ., Cambridge, MA. Graduate School of Education.

    THIS ACQUISITIONS LIST IS A BIBLIOGRAPHY OF MATERIAL ON VARIOUS ASPECTS OF EDUCATION. OVER 300 UNANNOTATED REFERENCES ARE PROVIDED FOR DOCUMENTS DATING MAINLY FROM 1960 TO 1966. BOOKS, JOURNALS, REPORT MATERIALS, AND UNPUBLISHED MANUSCRIPTS ARE LISTED UNDER THE FOLLOWING HEADINGS--(1) ACHIEVEMENT, (2) ADOLESCENCE, (3) CHILD DEVELOPMENT, (4)…

  7. Course Resource Lists.

    Science.gov (United States)

    England, Robert G.

    The Mountain-Plains Course Resource List is presented by job title for 26 curriculum areas. For each area the printed materials, audiovisual aids, and equipment needed for the course are listed. The 26 curriculum areas are: mathematics skills, communication skills, office education, lodging services, food services, marketing and distribution,…

  8. Core lifter

    Energy Technology Data Exchange (ETDEWEB)

    Pavlov, N G; Edel' man, Ya A

    1981-02-15

    A core lifter is suggested which contains a housing, core-clamping elements installed in the housing depressions in the form of semirings with projections on the outer surface restricting the rotation of the semirings in the housing depressions. In order to improve the strength and reliability of the core lifter, the semirings have a variable transverse section formed from the outside by the surface of the rotation body of the inner arc of the semiring aroung the rotation axis and from the inner a cylindrical surface which is concentric to the outer arc of the semiring. The core-clamping elements made in this manner have the possibility of freely rotating in the housing depressions under their own weight and from contact with the core sample. These semirings do not have weakened sections, have sufficient strength, are inserted into the limited ring section of the housing of the core lifter without reduction in its through opening and this improve the reliability of the core lifter in operation.

  9. Reactor core

    International Nuclear Information System (INIS)

    Azekura, Kazuo; Kurihara, Kunitoshi.

    1992-01-01

    In a BWR type reactor, a great number of pipes (spectral shift pipes) are disposed in the reactor core. Moderators having a small moderating cross section (heavy water) are circulated in the spectral shift pipes to suppress the excess reactivity while increasing the conversion ratio at an initial stage of the operation cycle. After the intermediate stage of the operation cycle in which the reactor core reactivity is lowered, reactivity is increased by circulating moderators having a great moderating cross section (light water) to extend the taken up burnup degree. Further, neutron absorbers such as boron are mixed to the moderator in the spectral shift pipe to control the concentration thereof. With such a constitution, control rods and driving mechanisms are no more necessary, to simplify the structure of the reactor core. This can increase the fuel conversion ratio and control great excess reactivity. Accordingly, a nuclear reactor core of high conversion and high burnup degree can be attained. (I.N.)

  10. Ice Cores

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Records of past temperature, precipitation, atmospheric trace gases, and other aspects of climate and environment derived from ice cores drilled on glaciers and ice...

  11. List Decoding of Algebraic Codes

    DEFF Research Database (Denmark)

    Nielsen, Johan Sebastian Rosenkilde

    We investigate three paradigms for polynomial-time decoding of Reed–Solomon codes beyond half the minimum distance: the Guruswami–Sudan algorithm, Power decoding and the Wu algorithm. The main results concern shaping the computational core of all three methods to a problem solvable by module...... Hermitian codes using Guruswami–Sudan or Power decoding faster than previously known, and we show how to Wu list decode binary Goppa codes....... to solve such using module minimisation, or using our new Demand–Driven algorithm which is also based on module minimisation. The decoding paradigms are all derived and analysed in a self-contained manner, often in new ways or examined in greater depth than previously. Among a number of new results, we...

  12. Toward full MOX core design

    International Nuclear Information System (INIS)

    Rouviere, G.; Guillet, J.L.; Bruna, G.B.; Pelet, J.

    1999-01-01

    This paper presents a selection of the main preliminary results of a study program sponsored by COGEMA and currently carried out by FRAMATOME. The objective of this study is to investigate the feasibility of full MOX core loading in a French 1300 MWe PWR, a recent and widespread standard nuclear power plant. The investigation includes core nuclear design, thermal hydraulic and systems aspects. (authors)

  13. List identifies threatened ecosystems

    Science.gov (United States)

    Showstack, Randy

    2012-09-01

    The International Union for Conservation of Nature (IUCN) announced on 9 September that it will develop a new Red List of Ecosystems that will identify which ecosystems are vulnerable or endangered. The list, which is modeled on the group's Red List of Threatened Species™, could help to guide conservation activities and influence policy processes such as the Convention on Biological Diversity, according to the group. “We will assess the status of marine, terrestrial, freshwater, and subterranean ecosystems at local, regional, and global levels,” stated Jon Paul Rodriguez, leader of IUCN's Ecosystems Red List Thematic Group. “The assessment can then form the basis for concerted implementation action so that we can manage them sustainably if their risk of collapse is low or restore them if they are threatened and then monitor their recovery.”

  14. Green Power Partner List

    Science.gov (United States)

    The U.S. EPA's Green Power Partnership is a voluntary program designed to reduce the environmental impact of electricity generation by promoting renewable energy. There are thousands of Green Power Partners, all listed on this page.

  15. Contaminant Candidate List 2

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 2 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  16. Contaminant Candidate List 3

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 3 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  17. Contaminant Candidate List 1

    Data.gov (United States)

    U.S. Environmental Protection Agency — CCL 1 is a list of contaminants that are currently not subject to any proposed or promulgated national primary drinking water regulations, that are known or...

  18. License Address List

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Address list generated from National Saltwater Angler Registry. Used in conjunction with an address-based sample as per survey design.

  19. List of publications 1988

    International Nuclear Information System (INIS)

    1989-01-01

    A list is given of reports, articles published in or submitted to journals, theses, conference papers, patents and reports only for internal use, published by the Nuclear Research Institute staff in 1988

  20. Goat production check list

    DEFF Research Database (Denmark)

    Henriksen, Jørgen; Nielsen, Mette Benedicte Olaf; Madsen, Jørgen

    2009-01-01

    This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production.......This check list, financed by DanChurchAid, highlights all issues should be carefully investigated before investing in distribution of goats and in interventions to assist poor rural communities to improve their livelihood through goat production....

  1. The impact of IFRS on ratios of listed and new listed companies of Athens Exchange

    Directory of Open Access Journals (Sweden)

    Balios Dimitrios

    2013-07-01

    Full Text Available In this study we are researching the effect of the implementation of International Financial Reporting Standards (IFRS on financial ratios of listed companies of Athens Exchange (AE. Emphasis is given to the differences between Greek Accounting Standards (GAS and IFRS and their impact on the calculation of financial ratios which are based on financial statements prepared in accordance with the first or the second accounting standard. Therefore, the study was applied to two samples of companies. The first sample includes companies that have been listed in AE for years and the second sample includes companies that have recently been listed in AE. Considering the particular characteristics of each group of companies, we are examining the probability of quantitative differentiations in financial ratios due to the transition from the one accounting standard to the other. The results of the research results showed that both samples of companies, when not influenced by other factors, do not have significant differences in their behavior.

  2. Reactor core

    International Nuclear Information System (INIS)

    Matsuura, Tetsuaki; Nomura, Teiji; Tokunaga, Kensuke; Okuda, Shin-ichi

    1990-01-01

    Fuel assemblies in the portions where the gradient of fast neutron fluxes between two opposing faces of a channel box is great are kept loaded at the outermost peripheral position of the reactor core also in the second operation cycle in the order to prevent interference between a control rod and the channel box due to bending deformation of the channel box. Further, the fuel assemblies in the second row from the outer most periphery in the first operation cycle are also kept loaded at the second row in the second operation cycle. Since the gradient of the fast neutrons in the reactor core is especially great at the outer circumference of the reactor core, the channel box at the outer circumference is bent such that the surface facing to the center of the reactor core is convexed and the channel box in the second row is also bent to the identical direction, the insertion of the control rod is not interfered. Further, if the positions for the fuels at the outermost periphery and the fuels in the second row are not altered in the second operation cycle, the gaps are not reduced to prevent the interference between the control rod and the channel box. (N.H.)

  3. Beyond the Core: Peer Observation Brings Common Core to Vocational and Electives Classes

    Science.gov (United States)

    Thurber Rasmussen, Harriette

    2014-01-01

    This article describes how a Washington State School District increased professional learning around the Common Core State Standards. The challenge was how to establish a way for career and technical education and electives teachers to learn and apply Common Core in their classes. Weaving Common Core literacy standards into vocational and…

  4. Nuclear standards

    International Nuclear Information System (INIS)

    Fichtner, N.; Becker, K.; Bashir, M.

    1981-01-01

    This compilation of all nuclear standards available to the authors by mid 1980 represents the third, carefully revised edition of a catalogue which was first published in 1975 as EUR 5362. In this third edition several changes have been made. The title has been condensed. The information has again been carefully up-dated, covering all changes regarding status, withdrawal of old standards, new projects, amendments, revisions, splitting of standards into several parts, combination of several standards into one, etc., as available to the authors by mid 1980. The speed with which information travels varies and requires in many cases rather tedious and cumbersome inquiries. Also, the classification scheme has been revised with the goal of better adjustment to changing situations and priorities. Whenever it turned out to be difficult to attribute a standard to a single subject category, multiple listings in all relevant categories have been made. As in previous editions, within the subcategories the standards are arranged by organization (in Categorie 2.1 by country) alphabetically and in ascending numerical order. It covers all relevant areas of power reactors, the fuel cycle, radiation protection, etc., from the basic laws and governmental regulations, regulatory guides, etc., all the way to voluntary industrial standards and codes of pratice. (orig./HP)

  5. Department of Energy Standards Index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-01

    This TSL, intended for use in selecting and using DOE technical standards and other Government and non-Government standards, provides listing of current and inactive DOE technical standards, non-Government standards adopted by DOE, other Government documents in which DOE has a recorded interest, and cancelled DOE technical standards.

  6. STAFF VACANCY LIST

    CERN Document Server

    Human Resources Division

    2002-01-01

    For economy reasons, it has been decided to stop printing and distributing this list to Staff Members. It can be found on the Web (LIST). Divisional Administrative Officers will receive an updated printed copy on a monthly basis and are asked to display this in a public place in their division. Copies will also be posted on the notice boards of the Administration Building (No. 60) in the glass-fronted cabinet (close to the lifts) and also on the notice board close to the Post Office. A copy will also be given to the Reception (Building No. 33). Human Resources Division Tel. 74606

  7. Identifying Core Competencies of Infection Control Nurse Specialists in Hong Kong.

    Science.gov (United States)

    Chan, Wai Fong; Bond, Trevor G; Adamson, Bob; Chow, Meyrick

    2016-01-01

    To confirm a core competency scale for Hong Kong infection control nurses at the advanced nursing practice level from the core competency items proposed in a previous phase of this study. This would serve as the foundation of competency assurance in Hong Kong hospitals. A cross-sectional survey design was used. All public and private hospitals in Hong Kong. All infection control nurses in hospitals of Hong Kong. The 83-item proposed core competency list established in an earlier study was transformed into a questionnaire and sent to 112 infection control nurses in 48 hospitals in Hong Kong. They were asked to rate the importance of each infection prevention and control item using Likert-style response categories. Data were analyzed using the Rasch model. The response rate of 81.25% was achieved. Seven items were removed from the proposed core competency list, leaving a scale of 76 items that fit the measurement requirements of the unidimensional Rasch model. Essential core competency items of advanced practice for infection control nurses in Hong Kong were identified based on the measurement criteria of the Rasch model. Several items of the scale that reflect local Hong Kong contextual characteristics are distinguished from the overseas standards. This local-specific competency list could serve as the foundation for education and for certification of infection control nurse specialists in Hong Kong. Rasch measurement is an appropriate analytical tool for identifying core competencies of advanced practice nurses in other specialties and in other locations in a manner that incorporates practitioner judgment and expertise.

  8. The validation of the standard Chinese version of the European Organization for Research and Treatment of Cancer Quality of Life Core Questionnaire 30 (EORTC QLQ-C30 in pre-operative patients with brain tumor in China

    Directory of Open Access Journals (Sweden)

    Zhang Hong-ying

    2011-04-01

    Full Text Available Abstract Background Health related quality of life (HRQOL has increasingly emphasized on cancer patients. The psychometric properties of the standard Chinese version of the European Organization for Research and Treatment of Cancer Quality of Life Core Questionnaire 30 (EORTC QLQ-C30, version 3.0 in brain tumor patients wasn't proven, and there was no baseline HRQOL in brain tumor patients prior to surgery. Methods The questionnaire EORTC QLQ-C30 (version 3.0 was administered at three time points: T1, the first or the second day that patients were hospitalized after the brain tumor suspected or diagnosed by MRI or CT; T2, 1 to 2 days after T1, (T1 and T2 were both before surgery; T3, the day before discharge. Clinical variables included disease histologic types, cognitive function, and Karnofsky Performance Status. Results Cronbach's alpha coefficients for multi-item scales were greater than .70 and multitrait scaling analysis showed that most of the item-scale correlation coefficients met the standards of convergent and discriminant validity, except for the cognitive functioning scale. All scales and items exhibited construct validity. Score changes over peri-operation were observed in physical and role functioning scales. Compared with mixed cancer patients assessed after surgery but before adjuvant treatment, brain tumor patients assessed pre-surgery presented better function and fewer symptoms. Conclusions The standard Chinese version of the EORTC QLQ-C30 was overall a valid instrument to assess HRQOL in brain tumor patients in China. The baseline HRQOL in brain tumor patients pre-surgery was better than that in mixed cancer patients post-surgery. Future study should modify cognitive functioning scale and examine test-retest reliability and response validity.

  9. Iterative List Decoding

    DEFF Research Database (Denmark)

    Justesen, Jørn; Høholdt, Tom; Hjaltason, Johan

    2005-01-01

    We analyze the relation between iterative decoding and the extended parity check matrix. By considering a modified version of bit flipping, which produces a list of decoded words, we derive several relations between decodable error patterns and the parameters of the code. By developing a tree...... of codewords at minimal distance from the received vector, we also obtain new information about the code....

  10. List of participants

    Indian Academy of Sciences (India)

    List of participants. Abbas Sohrab, BARC, Mumbai, India. Achary S N, BARC, Mumbai, India. Acharya Prashant G, JMS College, Ahmedabad, India. Aggarwal S K, BARC, Mumbai, India. Agrawal Ashish, BARC, Mumbai, India. Alam Md Sayem, AMU, Aligarh, India. Alamelu D, BARC, Mumbai, India. Aldona Rajewska, IAE ...

  11. Water Conservation Resource List.

    Science.gov (United States)

    NJEA Review, 1981

    1981-01-01

    Alarmed by the growing water shortage, the New Jersey State Office of Dissemination has prepared this annotated list of free or inexpensive instructional materials for teaching about water conservation, K-l2. A tipsheet for home water conservation is appended. (Editor/SJL)

  12. Booster parameter list

    International Nuclear Information System (INIS)

    Parsa, Z.

    1986-10-01

    The AGS Booster is designed to be an intermediate synchrotron injector for the AGS, capable of accelerating protons from 200 MeV to 1.5 GeV. The parameters listed include beam and operational parameters and lattice parameters, as well as parameters pertaining to the accelerator's magnets, vacuum system, radio frequency acceleration system, and the tunnel. 60 refs., 41 figs

  13. List of publications 1990

    International Nuclear Information System (INIS)

    1991-06-01

    AECL Research is engaged in research and development related to the peaceful applications of nuclear energy. Specifically, the company's mission is to perform the research, development, demonstration and marketing required to apply nuclear sciences and their related technologies for the maximum benefit of Canada. Among our most important products are scientific reports, publications and conference presentations. This document lists our publications for 1990

  14. Making Lists, Enlisting Scientists

    DEFF Research Database (Denmark)

    Jensen, Casper Bruun

    2011-01-01

    was the indicator conceptualised? How were notions of scientific knowledge and collaboration inscribed and challenged in the process? The analysis shows a two-sided process in which scientists become engaged in making lists but which is simultaneously a way for research policy to enlist scientists. In conclusion...

  15. The Christmas list

    CERN Multimedia

    James Gillies

    2010-01-01

    List making seems to be among mankind’s favourite activities, particularly as the old year draws to a close and the new one begins. It seems that we all want to know what the top 100 annoying pop songs are, who are the world’s most embarrassing people and what everyone’s been watching on TV. The transition from 2009 to 2010 was no different, but some of the latest batch of lists have a few surprising entries. According to the Global Language Monitor, ‘twitter’ was the top word of 2009. No surprises there, but ‘hadron’ came in at number 8 on the list. ‘King of pop’ was top phrase, according to the same source, but ‘god particle’ came in at number 10. And while ‘Barack Obama’ was the name of the year, ‘Large Hadron Collider’ came in at number four. The Global Language Monitor was not the only organization whose lists included particle physics references. &ls...

  16. Getting on the List

    Science.gov (United States)

    ... to know FAQ Living donation What is living donation? Organs Types Being a living donor First steps Being ... brochures What Every Patient Needs to Know Living Donation Multiple Listing Visit UNOS Store Learn more How organs are matched How to become a living donor ...

  17. 15 CFR 230.7 - Description of services and list of fees, incorporation by reference.

    Science.gov (United States)

    2010-01-01

    ... STANDARD REFERENCE MATERIALS STANDARD REFERENCE MATERIALS Description of Services and List of Fees § 230.7 Description of services and list of fees, incorporation by reference. (a) The text of NIST Special Publication... 15 Commerce and Foreign Trade 1 2010-01-01 2010-01-01 false Description of services and list of...

  18. Polar Coding with CRC-Aided List Decoding

    Science.gov (United States)

    2015-08-01

    TECHNICAL REPORT 2087 August 2015 Polar Coding with CRC-Aided List Decoding David Wasserman Approved...list decoding . RESULTS Our simulation results show that polar coding can produce results very similar to the FEC used in the Digital Video...standard. RECOMMENDATIONS In any application for which the DVB-S2 FEC is considered, polar coding with CRC-aided list decod - ing with N = 65536

  19. Standards, the users perspective

    International Nuclear Information System (INIS)

    Nason, W.D.

    1993-01-01

    The term standard has little meaning until put into the proper context. What is being standardized? What are the standard conditions to be applied? The list of questions that arise goes on and on. In this presentation, answers to these questions are considered in the interest of providing a basic understanding of what might be useful to the electrical power industry in the way of standards and what the limitations on application of them would be as well. 16 figs

  20. Common Core: Teaching Optimum Topic Exploration (TOTE)

    Science.gov (United States)

    Karge, Belinda Dunnick; Moore, Roxane Kushner

    2015-01-01

    The Common Core has become a household term and yet many educators do not understand what it means. This article explains the historical perspectives of the Common Core and gives guidance to teachers in application of Teaching Optimum Topic Exploration (TOTE) necessary for full implementation of the Common Core State Standards. An effective…

  1. Simplifying the ELA Common Core; Demystifying Curriculum

    Science.gov (United States)

    Schmoker, Mike; Jago, Carol

    2013-01-01

    The English Language Arts (ELA) Common Core State Standards ([CCSS], 2010) could have a transformational effect on American education. Though the process seems daunting, one can begin immediately integrating the essence of the ELA Common Core in every subject area. This article shows how one could implement the Common Core and create coherent,…

  2. Thermal and hydraulic behaviour of CANDU cores under severe accident conditions - final report

    International Nuclear Information System (INIS)

    Rogers, J.T.

    1984-06-01

    This volume of appendices presents listings and sample runs of the computer codes used in the study of the thermalhydraulic behaviour of CANDU reactor cores during severe loss of coolant accidents. The codes, written in standard FORTRAN, are MODBOIL, to calculate moderator temperatures, pressures and water levels; DEBRIS, to calculate the transient temperature distribution in the debris of calandria and pressure tubes and fuel pellets; MOLTENPOOL, to calculate the temperature history in a pool of molten debris; CONFILM, to calculate the behaviour of a condensing film of vaporized core debris on the calandria wall, and BLDG, to calculate the pressurization of the containment during the expulsion of moderator through pressure relief ducts. In addition there are discussions of the average condensation heat transfer coefficient for vaporized core material on the calandria wall, and of vapor explosions

  3. Core principles of evolutionary medicine: A Delphi study.

    Science.gov (United States)

    Grunspan, Daniel Z; Nesse, Randolph M; Barnes, M Elizabeth; Brownell, Sara E

    2018-01-01

    Evolutionary medicine is a rapidly growing field that uses the principles of evolutionary biology to better understand, prevent and treat disease, and that uses studies of disease to advance basic knowledge in evolutionary biology. Over-arching principles of evolutionary medicine have been described in publications, but our study is the first to systematically elicit core principles from a diverse panel of experts in evolutionary medicine. These principles should be useful to advance recent recommendations made by The Association of American Medical Colleges and the Howard Hughes Medical Institute to make evolutionary thinking a core competency for pre-medical education. The Delphi method was used to elicit and validate a list of core principles for evolutionary medicine. The study included four surveys administered in sequence to 56 expert panelists. The initial open-ended survey created a list of possible core principles; the three subsequent surveys winnowed the list and assessed the accuracy and importance of each principle. Fourteen core principles elicited at least 80% of the panelists to agree or strongly agree that they were important core principles for evolutionary medicine. These principles over-lapped with concepts discussed in other articles discussing key concepts in evolutionary medicine. This set of core principles will be helpful for researchers and instructors in evolutionary medicine. We recommend that evolutionary medicine instructors use the list of core principles to construct learning goals. Evolutionary medicine is a young field, so this list of core principles will likely change as the field develops further.

  4. CORE annual report 2006

    International Nuclear Information System (INIS)

    Gut, A.

    2007-04-01

    This annual report for the Swiss Federal Office of Energy (SFOE) summarises the activities of the Swiss Federal Commission on Energy Research CORE in 2006. The six main areas of work during the period 2004 - 2007 are examined, including a review of the SFOE's energy research programme, a road-map for the way towards the realisation of a 2000-watt society, the formulation of an energy research concept for 2008 - 2011, international co-operation, the dissemination of information and the assessment of existing and new instruments. International activities and Switzerland's involvement in energy research within the framework of the International Energy Agency IEA are discussed. New and existing projects are listed and the work done at the Competence Centre for Energy and Mobility noted. The Swiss Technology Award 2007 is presented. Information supplied to interested bodies to help improve knowledge on research work being done and to help make discussions on future energy supply more objective is discussed

  5. Core BPEL

    DEFF Research Database (Denmark)

    Hallwyl, Tim; Højsgaard, Espen

    The Web Services Business Process Execution Language (WS-BPEL) is a language for expressing business process behaviour based on web services. The language is intentionally not minimal but provides a rich set of constructs, allows omission of constructs by relying on defaults, and supports language......, does not allow omissions, and does not contain ignorable elements. We do so by identifying syntactic sugar, including default values, and ignorable elements in WS-BPEL. The analysis results in a translation from the full language to the core subset. Thus, we reduce the effort needed for working...

  6. Revisiting lemma lists in Swahili dictionaries | Wójtowicz | Lexikos

    African Journals Online (AJOL)

    When compiling a dictionary, a lexicographer has a set of decisions to make — start-ing with drawing up a lemma list to such issues as formatting a dictionary entry. Relying on corpus data while designing a lemma list and describing entries is standard in present lexicography, but there are still decisions — like the choice of ...

  7. CORE annual report 2006; CORE Jahresbericht 2006

    Energy Technology Data Exchange (ETDEWEB)

    Gut, A

    2007-04-15

    This annual report for the Swiss Federal Office of Energy (SFOE) summarises the activities of the Swiss Federal Commission on Energy Research CORE in 2006. The six main areas of work during the period 2004 - 2007 are examined, including a review of the SFOE's energy research programme, a road-map for the way towards the realisation of a 2000-watt society, the formulation of an energy research concept for 2008 - 2011, international co-operation, the dissemination of information and the assessment of existing and new instruments. International activities and Switzerland's involvement in energy research within the framework of the International Energy Agency IEA are discussed. New and existing projects are listed and the work done at the Competence Centre for Energy and Mobility noted. The Swiss Technology Award 2007 is presented. Information supplied to interested bodies to help improve knowledge on research work being done and to help make discussions on future energy supply more objective is discussed.

  8. Integration of Biosafety into Core Facility Management

    OpenAIRE

    Fontes, Benjamin

    2013-01-01

    This presentation will discuss the implementation of biosafety policies for small, medium and large core laboratories with primary shared objectives of ensuring the control of biohazards to protect core facility operators and assure conformity with applicable state and federal policies, standards and guidelines. Of paramount importance is the educational process to inform core laboratories of biosafety principles and policies and to illustrate the technology and process pathways of the core l...

  9. Desvelando climas de opinión por medio del Social Media Mining y Análisis de Redes Sociales en Twitter. El caso de los Common Core State Standards

    Directory of Open Access Journals (Sweden)

    Miguel del Fresno García

    2015-06-01

    Full Text Available Los cambios derivados de la innovación tecnológica gracias a Internet y sus medios sociales están modificando la estructura de las relaciones interpersonales. El Social Media Mining (SMM es el proceso de extraer, almacenar, representar, visualizar y analizar datos masivos generados por los usuarios con el objetivo de descubrir patrones significativos a partir de las interacciones sociales en los medios sociales de Internet. La intersección del Análisis de Redes Sociales (ARS y SMM, en este caso Twitter por medio de sus conexiones explícitas significativas, permite hacer visible lo que hasta ahora permanecía invisible: la estructura en red de climas de opinión y la identificación de aquellos nodos o superhubs que tienen una influencia social desproporcionada en su red. Se presenta el análisis del clima de opinión en Twitter alrededor de los Common Core State Standards (CCSS, uno de las reformas educativas más ambiciosos de los últimos 50 años en EEUU. lo que hasta ativaspl, aprtir , en este caso twitter, Universidad de Califormnia San Diego (Twitterdesexplícitas

  10. List of HMI reports

    International Nuclear Information System (INIS)

    1987-01-01

    The Hahn-Meitner-Institute Berlin publishes a series of reports with the results of R+D work of the institute. This list of publications contains also an author index in alphabetical order which points to annual reports of the institute as well as to the reports of the sections of nuclear and radiation physics, nuclear chemistry and reactor, and the section data processing and electronics. With 440 refs [de

  11. Software listing: CHEMTOX database

    International Nuclear Information System (INIS)

    Moskowitz, P.D.

    1993-01-01

    Initially launched in 1983, the CHEMTOX Database was among the first microcomputer databases containing hazardous chemical information. The database is used in many industries and government agencies in more than 17 countries. Updated quarterly, the CHEMTOX Database provides detailed environmental and safety information on 7500-plus hazardous substances covered by dozens of regulatory and advisory sources. This brief listing describes the method of accessing data and provides ordering information for those wishing to obtain the CHEMTOX Database

  12. High-Risk List

    Science.gov (United States)

    2017-01-01

    economy. The World Bank has said that “corruption creates an unfavorable business environment by undermining the operation efficiency of firms and... Bank Began as ‘Ponzi Scheme,’” 11/27/2012. 64 Independent Joint Anti-Corruption Monitoring and Evaluation Committee, Unfinished Business : The Follow...HIGH RISK AREA 7: Oversight 51 HIGH-RISK AREA 8: Strategy and Planning 55 CONCLUSION HIGH RISK LIST I JANUARY 11, 2017 2 EXECUTIVE SUMMARY

  13. A Strategy Study on the SCI List of Nuclear Engineering and Technology

    International Nuclear Information System (INIS)

    Yi, Ji Ho; Lee, Yoo Jin; Jeong, Jo Enn

    2014-01-01

    The number of papers published in SCI (Science Citation Index) journal is used as a standard for evaluating the level of science technology and a comparative ranking among countries; thus, the journal of the Korean Nuclear Society (KNS), in the SCI. For the SCI, there are 3,750 journals of core (standard) and 4,824 journals of expanded versions; however, NET belongs to the expanded version. As of January 2014, only 12 Korean journals were listed in the SCI core journals and 90 journals were listed in the expanded version. In order for NET of KNS to grow as an international journal, it must be listed in the SCI. With a view to pursuing this goal, it is imperative to undertake the following efforts. First, many good papers should be attracted. That is, the publication of invited papers should be promoted, and a special edition should be issued with the inclusion of prestigious scientists in Korea and overseas who are able to raise the If. Also, a contributor should be given direct and indirect incentives, and above all, academic personnel should be actively involved. Second, internationalization of the journals is needed. In other words, the authors, editors, and reviewers should be more international. In particular, the activities of foreign editors should be fortified. Third, promotion should b reinforced. That is, an independent web site of NET should be operated, and in particular, a paper submission system should be composed scientifically. Fourth, the society system should be improved. In other words, for many good papers to be submitted, an institutional improvement is required to revise the regulations under which the results of a citation analysis can be reflected and to strengthen the activities of the editing committee

  14. A Strategy Study on the SCI List of Nuclear Engineering and Technology

    Energy Technology Data Exchange (ETDEWEB)

    Yi, Ji Ho; Lee, Yoo Jin; Jeong, Jo Enn [Korea Atomic Energy Reserch Institute, Daejeon (Korea, Republic of)

    2014-10-15

    The number of papers published in SCI (Science Citation Index) journal is used as a standard for evaluating the level of science technology and a comparative ranking among countries; thus, the journal of the Korean Nuclear Society (KNS), in the SCI. For the SCI, there are 3,750 journals of core (standard) and 4,824 journals of expanded versions; however, NET belongs to the expanded version. As of January 2014, only 12 Korean journals were listed in the SCI core journals and 90 journals were listed in the expanded version. In order for NET of KNS to grow as an international journal, it must be listed in the SCI. With a view to pursuing this goal, it is imperative to undertake the following efforts. First, many good papers should be attracted. That is, the publication of invited papers should be promoted, and a special edition should be issued with the inclusion of prestigious scientists in Korea and overseas who are able to raise the If. Also, a contributor should be given direct and indirect incentives, and above all, academic personnel should be actively involved. Second, internationalization of the journals is needed. In other words, the authors, editors, and reviewers should be more international. In particular, the activities of foreign editors should be fortified. Third, promotion should b reinforced. That is, an independent web site of NET should be operated, and in particular, a paper submission system should be composed scientifically. Fourth, the society system should be improved. In other words, for many good papers to be submitted, an institutional improvement is required to revise the regulations under which the results of a citation analysis can be reflected and to strengthen the activities of the editing committee.

  15. Marker list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...Database Site Policy | Contact Us Marker list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  16. QTL list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...Policy | Contact Us QTL list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  17. Oil and gas field code master list, 1993

    Energy Technology Data Exchange (ETDEWEB)

    1993-12-16

    This document contains data collected through October 1993 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service.

  18. NOAA Weather Radio - Station Listing

    Science.gov (United States)

    Non-Zero All Hazards Logo Emergency Alert Description Event Codes Fact Sheet FAQ Organization Search COVERAGE County Coverage Listings State Coverage Listings NWR Station Search Maps SAME SAME Coding Using

  19. List manipulation in Turbo Prolog

    Directory of Open Access Journals (Sweden)

    V.Cotelea

    1995-06-01

    Full Text Available The present paper is concerned with list processing in Turbo Prolog language. It doesn't claim to be an exhaustive description of operations which can be performed upon lists. Nevertheless adduced programs are most representative, more or less known to specialists in logic programming domain. By means of examples are explained the list manipulation techniques, use of recursion, declarative comparison of predicates, analysis and fixation of acceptable prototypes and some problems of predicates' inconsistency. Index terms. Prolog, list, recursion.

  20. THE DEVELOPMENT OF TECHNOLOGY OF THE CORE THERMO-MECHANICALLY HARDENED REINFORC-ING STEEL OF GRADE A700HW OF DIE-ROLLED SECTION NO 12, 14, 16 PRODUCTION ACCORDING TO REQUIREMENT OF FINNISH STANDARDS SFST1216 IN CONDITIONS OF SMALL-SECTION MILL 320 OF RUP «BMZ»

    Directory of Open Access Journals (Sweden)

    A. V. Rusalenko

    2009-01-01

    Full Text Available The development of technology of the core thermomechanically hardened reinforcing steel of grade А700HW of die-rolled section No 12, 14, 16 production according to requirement of Finnish standards SFST1216 in conditions of small-section mill 320 of RUP «BMZ» is given.

  1. Listed waste determination report

    International Nuclear Information System (INIS)

    1993-06-01

    On September 23, 1988, the US Environmental Protection Agency (EPA) published a notice clarifying interim status requirements for the management of radioactive mixed waste thereby subjecting the Idaho National Engineering Laboratory (INEL) and other applicable Department of Energy (DOE) sites to regulation under the Resource Conservation and Recovery Act (RCRA). Therefore, the DOE was required to submit a Part A Permit application for each treatment, storage, and disposal (TSD) unit within the INEL, defining the waste codes and processes to be regulated under RCRA. The September 1990 revised Part A Permit application, that was approved by the State of Idaho identified 101 potential acute and toxic hazardous waste codes (F-, P-, and U- listed wastes according to 40 CFR 261.31 and 40 CFR 261.33) for some TSD units at the Idaho Chemical Processing Plant. Most of these waste were assumed to have been introduced into the High-level Liquid Waste TSD units via laboratory drains connected to the Process Equipment Waste (PEW) evaporator (PEW system). At that time, a detailed and systematic evaluation of hazardous chemical use and disposal practices had not been conducted to determine if F-, P-, or Unlisted waste had been disposed to the PEW system. The purpose of this investigation was to perform a systematic and detailed evaluation of the use and disposal of the 101 F-, P-, and Unlisted chemicals found in the approved September 1990 Part A Permit application. This investigation was aimed at determining which listed wastes, as defined in 40 CFR 261.31 (F-listed) and 261.33 (P ampersand Unlisted) were discharged to the PEW system. Results of this investigation will be used to support revisions to the RCRA Part A Permit application

  2. List of Posters

    Science.gov (United States)

    List of Posters: Dark matter annihilation in the Galactic galo, by Dokuchaev Vyacheslav, et al. NEMO developments towards km3 telescope in the Mediterranean Sea. The NEMO project. Neutrino Mediterranean Observatory By Antonio Capone, NEMO Collaboration. Alignment as a result from QCD jet production or new still unknown physics at LHC? By Alexander Snigirev. Small-scale fluctuations of extensive air showers: systematics in energy and muon density estimation By Grigory Rubtsov. SHINIE: Simulation of High-Energy Neutrino Interacting with the Earth By Lin Guey-Lin, et al.. Thermodynamics of rotating solutions in n+1 dimensional Einstein - Maxwell -dilation gravity By Ahmad Sheykhi, et al.. Supernova neutrino physics with future large Cherenkov detectors By Daniele Montanino. Crossing of the Cosmological Constant Barrier in the string Inspired Dark Energy Model By S. Yu. Vernov. Calculations of radio signals produced by ultra-high and extremely high energy neutrino induced cascades in Antarctic ice By D. Besson, et al.. Inflation, Cosmic Acceleration and string Gravity By Ischwaree Neupane. Neutrino Physics: Charm and J/Psi production in the atmosphere By Liudmila Volkova. Three generation flavor transitions and decays of supernova relic neutrinos By Daniele Montanino. Lattice calculations & computational quantum field theory: Sonification of Quark and Baryon Spectra By Markum Harald, et al.. Generalized Kramers-Wannier Duality for spin systems with non-commutative symmetry By V. M. Buchstaber, et al.. Heavy ion collisions & quark matter: Nuclear matter jets and multifragmentation By Danut Argintaru, et al.. QCD hard interactions: The qT-spectrum of the Higgs and Slepton-pairs at the LHC By Guiseppe Bozzi. QCD soft interactions: Nonperturbative effects in Single-Spin Asymmetries: Instantons and TMD-parton distributions By Igor Cherednikov, et al.. Gluon dominance model and high multiplicity By Elena Kokoulina. Resonances in eta pi- pi- pi+ system By Dmitry Ryabchikov

  3. REVIEWER LIST – 2014

    OpenAIRE

    Chief Editor

    2014-01-01

    REVIEWER LIST – 2014 The Editorial Team would like to thank all those who gave generously of their time and expertise in reviewing the papers for the Indian Journal of Community Health in 2014.AAarti Kapil, New Delhi, IndiaAbhishek SinghAmandeep Kaur, Haldwani, IndiaAmit Kaushik, Safai, IndiaAnu Bhardwaj, Ambala, IndiaAnurag Chaudary, Ludhiana, IndiaA R BondArpan YagnikArvind Kumar Singh, Gorakhpur, IndiaAshish Yadav, Meerut, IndiaAthar Ansari, Aligarh, India BBaridalyne Nongkynrih, New Delhi...

  4. International Construction Measurement Standard

    OpenAIRE

    Mitchell, Charles

    2016-01-01

    The International Construction Measurement Standard Coalition (the Coalition) was formed on 17 June 2015 after meeting at the International Monetary Fund in Washington DC, USA. The Coalition, comprising the organisations listed below at the date of publication, aims to bring about consistency in construction cost reporting standards internationally. This is achieved by the creation and adoption of this ICMS, an agreed international standard for the structuring and presentation of cost reports...

  5. RELAP5 / MOD3.2 analysis of INSC standard problem INSCSP - V4 : investigation of heat transfer for partly uncovered VVER-1000 core at the test facility KS (RRC K1)

    International Nuclear Information System (INIS)

    Tentner, A.; Ahrens, J. W.

    2002-01-01

    The RELAP5/MOD3.2 computer program has been used to analyze a series of tests investigating heat-transfer from a partly uncovered VVER-1000 core in the KS test facility at the Russian Research Center ''Kurchatov Institute'' (RRC-KI). The analysis documented represents VVER Standard Problem 4 in Joint Project 6, which is the investigation of Computer Code Validation for Transient Analysis of RBMK and VVER Reactors, between the United States and Russian International Nuclear Safety Centers. The experiment facility and data, RELAP5 nodalization, and results are shown for one of the six tests defined in Standard Problem 4. Only part of the data was analyzed due to our conclusion that the available experimental data is not sufficient to allow the modeling of the actual experiment sequence. The experiment initial conditions were reached through a series of transient processes, about which no quantitative information was available. This has required the modeling of an arbitrary computational transient, with the goal of reaching initial conditions similar to those observed during the experiment. The use of an arbitrary transient introduces many degrees of freedom in the analysis, i.e. initial computational values that influence the entire sequence of events, including the loop behavior during the experiment time window. Reasonable agreement between RELAP5 and the experiment data can be obtained by manipulating a number of initial computational values, including the liquid level in the fuel assembly model, the liquid level in the annular region, the quality of the saturated vapor in the voided loop regions, etc. Our study has focused on exploring the sensitivity of results to changes in these initial values which are not based on experimental information, but are selected with the goal of matching the experimentally observed behavior during the experiment time window. We have shown that changes in several initial arbitrary values can lead to similar changes in the

  6. Registered plant list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...the Plant DB link list in simple search page) Genome analysis methods Presence or... absence of Genome analysis methods information in this DB (link to the Genome analysis methods information ...base Site Policy | Contact Us Registered plant list - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  7. Master Minimum Equipment List -

    Data.gov (United States)

    Department of Transportation — The AEG System is used to create, revise, approve, and distribute text of the MMEL and Flight Standard Board (FSB)/Type Rating Report. The MMEL specifies under what...

  8. The Standard Model

    Science.gov (United States)

    Burgess, Cliff; Moore, Guy

    2012-04-01

    List of illustrations; List of tables; Preface; Acknowledgments; Part I. Theoretical Framework: 1. Field theory review; 2. The standard model: general features; 3. Cross sections and lifetimes; Part II. Applications: Leptons: 4. Elementary boson decays; 5. Leptonic weak interactions: decays; 6. Leptonic weak interactions: collisions; 7. Effective Lagrangians; Part III. Applications: Hadrons: 8. Hadrons and QCD; 9. Hadronic interactions; Part IV. Beyond the Standard Model: 10. Neutrino masses; 11. Open questions, proposed solutions; Appendix A. Experimental values for the parameters; Appendix B. Symmetries and group theory review; Appendix C. Lorentz group and the Dirac algebra; Appendix D. ξ-gauge Feynman rules; Appendix E. Metric convention conversion table; Select bibliography; Index.

  9. Understanding core conductor fabrics

    International Nuclear Information System (INIS)

    Swenson, D E

    2011-01-01

    ESD Association standard test method ANSI/ESD STM2.1 - Garments (STM2.1), provides electrical resistance test procedures that are applicable for materials and garments that have surface conductive or surface dissipative properties. As has been reported in other papers over the past several years 1 fabrics are now used in many industries for electrostatic control purposes that do not have surface conductive properties and therefore cannot be evaluated using the procedures in STM2.1 2 . A study was conducted to compare surface conductive fabrics with samples of core conductor fibre based fabrics in order to determine differences and similarities with regards to various electrostatic properties. This work will be used to establish a new work item proposal within WG-2, Garments, in the ESD Association Standards Committee in the USA.

  10. Side core lifter

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, Ya A

    1982-01-01

    A side core lifter is proposed which contains a housing with guide slits and a removable core lifter with side projections on the support section connected to the core receiver. In order to preserve the structure of the rock in the core sample by means of guaranteeing rectilinear movement of the core lifter in the rock, the support and core receiver sections are hinged. The device is equipped with a spring for angular shift in the core-reception part.

  11. Status of the IAEA safety standards programme

    International Nuclear Information System (INIS)

    2002-01-01

    This presentation describes the status of the IAEA safety standards program to May 2002. The safety standards program overcome whole main nuclear implementations as General safety, Nuclear safety, Radiation safety, Radioactive waste safety, and Transport safety. Throughout this report the first column provides the list of published IAEA Safety Standards. The second gives the working identification number (DS) of standards being developed or revised. The bold type indicates standard issued under the authority the Board of Governors, others are issued under authority of the Director General. The last column provides the list of Committees, the first Committee listed has the lead in the preparation and review of the particular standard

  12. Core vocabulary of young children with Down syndrome

    NARCIS (Netherlands)

    Deckers, S.R.J.M.; Zaalen, Y. van; Balkom, L.J.M. van; Verhoeven, L.T.W.

    2017-01-01

    The aim of this study was to develop a core vocabulary list for young children with intellectual disabilities between 2 and 7 years of age because data from this population are lacking in core vocabulary literature. Children with Down syndrome are considered one of the most valid reference groups

  13. Advanced Marketing Core Curriculum. Test Items and Assessment Techniques.

    Science.gov (United States)

    Smith, Clifton L.; And Others

    This document contains duties and tasks, multiple-choice test items, and other assessment techniques for Missouri's advanced marketing core curriculum. The core curriculum begins with a list of 13 suggested textbook resources. Next, nine duties with their associated tasks are given. Under each task appears one or more citations to appropriate…

  14. INIS: Authority list for journal titles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2003-03-01

    This is the twenty-ninth revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). It lists the titles of 12 990 journals which have contained articles within the scope of INIS. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the reader to find titles easily, the list is divided into two parts. In Part I, the full journal titles are grouped by country or international organization responsible for coverage and ordered alphabetically. In Part II, the full journal titles of all countries or international organizations are arranged alphabetically. The country name or the international organization name responsible for coverage of the journal title to INIS is entered in parentheses. Journal titles marked with an asterisk are regularly scanned by INIS. Titles that have been identified by INIS Centres as 'Key Journals' are marked with the hash sign.

  15. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2003-01-01

    This is the twenty-ninth revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). It lists the titles of 12 990 journals which have contained articles within the scope of INIS. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the reader to find titles easily, the list is divided into two parts. In Part I, the full journal titles are grouped by country or international organization responsible for coverage and ordered alphabetically. In Part II, the full journal titles of all countries or international organizations are arranged alphabetically. The country name or the international organization name responsible for coverage of the journal title to INIS is entered in parentheses. Journal titles marked with an asterisk are regularly scanned by INIS. Titles that have been identified by INIS Centres as 'Key Journals' are marked with the hash sign

  16. Catalogue of standards at the Safety Analysis department library, the first of March 1987

    International Nuclear Information System (INIS)

    1987-01-01

    This report is a compilation of ANS and ANSI/ANS, ANSI/ASME american standards, Regulatory guides (Power Reactor Division), IEEE standards, to which are added ANSI american standards, AFNOR french standards, all of them being updated until to day. This computed compilation is divided into three parts: 1) main descriptor categories; 2) list of american standards in chronological order, list of AFNOR french standards, list of Regulatory guides in numerical order. 3) list of descriptors in alphabetic order [fr

  17. The French initiative for scientific cores virtual curating : a user-oriented integrated approach

    Science.gov (United States)

    Pignol, Cécile; Godinho, Elodie; Galabertier, Bruno; Caillo, Arnaud; Bernardet, Karim; Augustin, Laurent; Crouzet, Christian; Billy, Isabelle; Teste, Gregory; Moreno, Eva; Tosello, Vanessa; Crosta, Xavier; Chappellaz, Jérome; Calzas, Michel; Rousseau, Denis-Didier; Arnaud, Fabien

    2016-04-01

    Managing scientific data is probably one the most challenging issue in modern science. The question is made even more sensitive with the need of preserving and managing high value fragile geological sam-ples: cores. Large international scientific programs, such as IODP or ICDP are leading an intense effort to solve this problem and propose detailed high standard work- and dataflows thorough core handling and curating. However most results derived from rather small-scale research programs in which data and sample management is generally managed only locally - when it is … The national excellence equipment program (Equipex) CLIMCOR aims at developing French facilities for coring and drilling investigations. It concerns indiscriminately ice, marine and continental samples. As part of this initiative, we initiated a reflexion about core curating and associated coring-data management. The aim of the project is to conserve all metadata from fieldwork in an integrated cyber-environment which will evolve toward laboratory-acquired data storage in a near future. In that aim, our demarche was conducted through an close relationship with field operators as well laboratory core curators in order to propose user-oriented solutions. The national core curating initiative currently proposes a single web portal in which all scientifics teams can store their field data. For legacy samples, this will requires the establishment of a dedicated core lists with associated metadata. For forthcoming samples, we propose a mobile application, under Android environment to capture technical and scientific metadata on the field. This application is linked with a unique coring tools library and is adapted to most coring devices (gravity, drilling, percussion, etc...) including multiple sections and holes coring operations. Those field data can be uploaded automatically to the national portal, but also referenced through international standards or persistent identifiers (IGSN, ORCID and INSPIRE

  18. Ambiguity in guideline definitions introduces assessor bias and influences consistency in IUCN Red List status assessments

    OpenAIRE

    Hayward, Matt W.; Child, Matthew F.; Kerley, Graham I. H.; Lindsey, Peter A.; Somers, Michael J.; Burns, Bruce

    2015-01-01

    The IUCN Red List is the most widely used tool to measure extinction risk and report biodiversity trends. Accurate and standardized conservation status assessments for the IUCN Red List are limited by a lack of adequate information; and need consistent and unbiased interpretation of that information. Variable interpretation stems from a lack of quantified thresholds in certain areas of the Red List guidelines. Thus, even in situations with sufficient information to make a Red List assessment,...

  19. Animal MRI Core

    Data.gov (United States)

    Federal Laboratory Consortium — The Animal Magnetic Resonance Imaging (MRI) Core develops and optimizes MRI methods for cardiovascular imaging of mice and rats. The Core provides imaging expertise,...

  20. INIS: Authority List for Journal Titles

    International Nuclear Information System (INIS)

    1992-01-01

    This is the nineteenth revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). It lists 10,797 journal titles which have contained articles within the scope of INIS. The purpose of this Authority List is to provide descriptive cataloguers with a standard abbreviation for journal titles and to assist users of INIS products with a tool for verifying the full title of a journal. A journal, or periodical, is generally published within a defined, fixed interval between issues, which usually has more than one issue a year, and which usually includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as Annual Review of Nuclear Science are included. Series titles as, for example the McGraw-Hill Series in Nuclear Engineering, are not included in this Authority. Entries: Each entry consists of: - the full journal title (highlighted); - the abbreviated title; - ISSN, if available; - CODEN, if available; - additional information related to the journal title. Arrangement: In Part I, the full journal titles are grouped by country or international organization name and ordered alphabetically, followed by the ISSN, the CODEN in square brackets if available, and then the abbreviated title. The abbreviated title is based on the rules of ISO 4: Documentation - International Code for the Abbreviation of Titles of Periodicals. The abbreviations of the words are taken from the ISDS List of Periodical Title Word Abbreviation. In Part II, the order of the citations is reversed: the abbreviated journal titles are arranged alphabetically, followed by country code. Then the full journal titles are followed by the country of publication, and if available, ISSN and CODEN. Additional Information: There is important information related to the journal titles which are fundamental for tracing the history of the title and the present status. They are listed below and are entered whenever applicable: - Ceased publication; - Superseded by

  1. Nuclear standards: current issues and future trends

    International Nuclear Information System (INIS)

    Landis, J.W.

    1985-01-01

    A summary of the important issues that currently face the nuclear standards field is presented and a discussion of how each of these issues is being resolved is given. The economic benefits that properly developed standards produce are listed

  2. Consensus conference on core radiological parameters to describe lumbar stenosis - an initiative for structured reporting

    Energy Technology Data Exchange (ETDEWEB)

    Andreisek, Gustav; Winklhofer, Sebastian F.X. [University Hospital Zurich, Department of Radiology, Zurich (Switzerland); Deyo, Richard A. [Oregon Health and Science University, Portland, OR (United States); Jarvik, Jeffrey G. [University of Washington, Seattle, WA (United States); Porchet, Francois [Schulthess Klinik, Zuerich (Switzerland); Steurer, Johann [University Hospital Zurich, Horten Center for patient oriented research and knowledge transfer, Zurich (Switzerland); Collaboration: On behalf of the LSOS working group

    2014-12-15

    To define radiological criteria and parameters as a minimum standard in a structured radiological report for patients with lumbar spinal stenosis (LSS) and to identify criteria and parameters for research purposes. All available radiological criteria and parameters for LSS were identified using systematic literature reviews and a Delphi survey. We invited to the consensus meeting, and provided data, to 15 internationally renowned experts from different countries. During the meeting, these experts reached consensus in a structured and systematic discussion about a core list of radiological criteria and parameters for standard reporting. We identified a total of 27 radiological criteria and parameters for LSS. During the meeting, the experts identified five of these as core items for a structured report. For central stenosis, these were ''compromise of the central zone'' and ''relation between fluid and cauda equina''. For lateral stenosis, the group agreed that ''nerve root compression in the lateral recess'' was a core item. For foraminal stenosis, we included ''nerve root impingement'' and ''compromise of the foraminal zone''. As a minimum standard, five radiological criteria should be used in a structured radiological report in LSS. Other parameters are well suited for research. (orig.)

  3. License - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...t list, Marker list, QTL list, Plant DB link & Genome analysis methods © Satoshi ... Policy | Contact Us License - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  4. Radiological Control Technician: Standardized technician Qualification Standard

    International Nuclear Information System (INIS)

    1992-10-01

    The Qualification Standard states and defines the knowledge and skill requirements necessary for successful completion of the Radiological Control Technician Training Program. The standard is divided into three phases: Phase I concerns RCT Academic training. There are 13 lessons associated with the core academics program and 19 lessons associated with the site academics program. The staff member should sign the appropriate blocks upon successful completion of the examination for that lesson or group of lessons. In addition, facility specific lesson plans may be added to meet the knowledge requirements in the Job Performance Measures (JPM) of the practical program. Phase II concerns RCT core/site practical (JPMs) training. There are thirteen generic tasks associated with the core practical program. Both the trainer/evaluator and student should sign the appropriate block upon successful completion of the JPM. In addition, facility specific tasks may be added or generic tasks deleted based on the results of the facility job evaluation. Phase III concerns the oral examination board successful completion of the oral examination board is documented by the signature of the chairperson of the board. Upon completion of all of the standardized technician qualification requirements, final qualification is verified by the student and the manager of the Radiological Control Department and acknowledged by signatures on the qualification standard. The completed Qualification Standard shall be maintained as an official training record

  5. Technology Reference Model (TRM): Technology/Standard List

    Data.gov (United States)

    Department of Veterans Affairs — The One VA Enterprise Architecture (OneVA EA) is a comprehensive picture of the Department of Veterans Affairs' (VA) operations, capabilities and services and the...

  6. Recommended Reading List for Faculty and Students, Military Qualification Standards (MQS) II Reading List.

    Science.gov (United States)

    1983-01-01

    Cornwell , James. Foch (1972). DC 342.8 A narrative of Ferdinand Fooh as a military onmander. F6 143 Marshall-Cornwall, J. H. Nepoleon as Militarh Comander...based on the author’a reotlletions of their actiona, decislons, N 52 and behavior. Montgoery, Bernard . The Memoirs of Field Hershal Viscount...effect the Battle of Stalingrad had on the E 68 outcome. Fall, Bernard B. Hell in a Very Small Place (1964). DS 550 An account of the 56-day siege of

  7. Title III List of Lists -- Raw Data Set

    Data.gov (United States)

    U.S. Environmental Protection Agency — This list was prepared to help firms handling chemicals determine whether they need to submit reports under sections 302, 304, or 313 of the Emergency Planning and...

  8. Motif discovery in ranked lists of sequences

    DEFF Research Database (Denmark)

    Nielsen, Morten Muhlig; Tataru, Paula; Madsen, Tobias

    2016-01-01

    Motif analysis has long been an important method to characterize biological functionality and the current growth of sequencing-based genomics experiments further extends its potential. These diverse experiments often generate sequence lists ranked by some functional property. There is therefore...... advantage of the regular expression feature, including enrichments for combinations of different microRNA seed sites. The method is implemented and made publicly available as an R package and supports high parallelization on multi-core machinery....... a growing need for motif analysis methods that can exploit this coupled data structure and be tailored for specific biological questions. Here, we present an exploratory motif analysis tool, Regmex (REGular expression Motif EXplorer), which offers several methods to evaluate the correlation of motifs...

  9. Safeguards summary event list (SSEL)

    International Nuclear Information System (INIS)

    Davidson, J.J.; MacMurdy, P.H.

    1980-12-01

    The List contains nine categories of events involving NRC licensed material or licensees. It is deliberately broad in scope for two main reasons. First, the list is designed to serve as a reference document. It is as complete and accurate as possible. Second, the list is intended to provide as broad a perspective of the nature of licensee-related events as possible. The nine categories of events are as follows: bomb-related events; intrusion events; missing and/or allegedly stolen events; transportation-related events; vandalism events; arson events; firearms-related events; sabotage events; and miscellaneous events

  10. On a List of Priests

    DEFF Research Database (Denmark)

    Isager, Signe

    2014-01-01

    The article concerns the fate of an often cited list of priests for Poseidon, which at some point was established and cut into a stele in ancient Halikarnassos. The list could be considered the genealogical table of Halikarnassos: The cult of Poseidon was founded by colonists from Troizen...... and the first priest on the list was a son of the god Poseidon himself. This could be read from the inscription on a new stele to which it was decided to transfer all the names on the first stele in the Late Hellenistic Period. The article presents two new documents for future discussions on when, why...

  11. In-core Instrument Subcritical Verification (INCISV) - Core Design Verification Method - 358

    International Nuclear Information System (INIS)

    Prible, M.C.; Heibel, M.D.; Conner, S.L.; Sebastiani, P.J.; Kistler, D.P.

    2010-01-01

    According to the standard on reload startup physics testing, ANSI/ANS 19.6.1, a plant must verify that the constructed core behaves sufficiently close to the designed core to confirm that the various safety analyses bound the actual behavior of the plant. A large portion of this verification must occur before the reactor operates at power. The INCISV Core Design Verification Method uses the unique characteristics of a Westinghouse Electric Company fixed in-core self powered detector design to perform core design verification after a core reload before power operation. A Vanadium self powered detector that spans the length of the active fuel region is capable of confirming the required core characteristics prior to power ascension; reactivity balance, shutdown margin, temperature coefficient and power distribution. Using a detector element that spans the length of the active fuel region inside the core provides a signal of total integrated flux. Measuring the integrated flux distributions and changes at various rodded conditions and plant temperatures, and comparing them to predicted flux levels, validates all core necessary core design characteristics. INCISV eliminates the dependence on various corrections and assumptions between the ex-core detectors and the core for traditional physics testing programs. This program also eliminates the need for special rod maneuvers which are infrequently performed by plant operators during typical core design verification testing and allows for safer startup activities. (authors)

  12. Core Hunter 3: flexible core subset selection.

    Science.gov (United States)

    De Beukelaer, Herman; Davenport, Guy F; Fack, Veerle

    2018-05-31

    Core collections provide genebank curators and plant breeders a way to reduce size of their collections and populations, while minimizing impact on genetic diversity and allele frequency. Many methods have been proposed to generate core collections, often using distance metrics to quantify the similarity of two accessions, based on genetic marker data or phenotypic traits. Core Hunter is a multi-purpose core subset selection tool that uses local search algorithms to generate subsets relying on one or more metrics, including several distance metrics and allelic richness. In version 3 of Core Hunter (CH3) we have incorporated two new, improved methods for summarizing distances to quantify diversity or representativeness of the core collection. A comparison of CH3 and Core Hunter 2 (CH2) showed that these new metrics can be effectively optimized with less complex algorithms, as compared to those used in CH2. CH3 is more effective at maximizing the improved diversity metric than CH2, still ensures a high average and minimum distance, and is faster for large datasets. Using CH3, a simple stochastic hill-climber is able to find highly diverse core collections, and the more advanced parallel tempering algorithm further increases the quality of the core and further reduces variability across independent samples. We also evaluate the ability of CH3 to simultaneously maximize diversity, and either representativeness or allelic richness, and compare the results with those of the GDOpt and SimEli methods. CH3 can sample equally representative cores as GDOpt, which was specifically designed for this purpose, and is able to construct cores that are simultaneously more diverse, and either are more representative or have higher allelic richness, than those obtained by SimEli. In version 3, Core Hunter has been updated to include two new core subset selection metrics that construct cores for representativeness or diversity, with improved performance. It combines and outperforms the

  13. Clinical Investigator Inspector List (CLIIL)

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Clinical Investigator Inspection List (CLIIL) contains names, addresses, and other pertinent information gathered from inspections of clinical investigators who...

  14. #DDOD: Establishment Registration & Device Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — SUMMARY DDOD use case to request means on consolidating multiple data sources (MDR, PMA, 510(k), R&L) in order to build a list of all marketed medical devices....

  15. Using mean duration and variation of procedure times to plan a list of surgical operations to fit into the scheduled list time.

    Science.gov (United States)

    Pandit, Jaideep J; Tavare, Aniket

    2011-07-01

    It is important that a surgical list is planned to utilise as much of the scheduled time as possible while not over-running, because this can lead to cancellation of operations. We wished to assess whether, theoretically, the known duration of individual operations could be used quantitatively to predict the likely duration of the operating list. In a university hospital setting, we first assessed the extent to which the current ad-hoc method of operating list planning was able to match the scheduled operating list times for 153 consecutive historical lists. Using receiver operating curve analysis, we assessed the ability of an alternative method to predict operating list duration for the same operating lists. This method uses a simple formula: the sum of individual operation times and a pooled standard deviation of these times. We used the operating list duration estimated from this formula to generate a probability that the operating list would finish within its scheduled time. Finally, we applied the simple formula prospectively to 150 operating lists, 'shadowing' the current ad-hoc method, to confirm the predictive ability of the formula. The ad-hoc method was very poor at planning: 50% of historical operating lists were under-booked and 37% over-booked. In contrast, the simple formula predicted the correct outcome (under-run or over-run) for 76% of these operating lists. The calculated probability that a planned series of operations will over-run or under-run was found useful in developing an algorithm to adjust the planned cases optimally. In the prospective series, 65% of operating lists were over-booked and 10% were under-booked. The formula predicted the correct outcome for 84% of operating lists. A simple quantitative method of estimating operating list duration for a series of operations leads to an algorithm (readily created on an Excel spreadsheet, http://links.lww.com/EJA/A19) that can potentially improve operating list planning.

  16. Broadband dielectric spectroscopy of standard and core-shell BaTiO.sub.3./sub.-NiO ceramic composites compared to the BaTiO.sub.3./sub. ceramics

    Czech Academy of Sciences Publication Activity Database

    Nuzhnyy, Dmitry; Petzelt, Jan; Bovtun, Viktor; Ostapchuk, Tetyana; Savinov, Maxim; Kempa, Martin; Bednyakov, Petr; Fernández-Garciá, L.; Rodriguez-Suarez, T.; Menendéz, J.L.

    2016-01-01

    Roč. 500, č. 1 (2016), s. 1-19 ISSN 0015-0193 R&D Projects: GA ČR GA15-08389S Institutional support: RVO:68378271 Keywords : core-shell composite * effective dielectric function * effective infrared response * effective medium approximation * percolation * barium titanate * nickel oxide Subject RIV: BM - Solid Matter Physics ; Magnetism Impact factor: 0.551, year: 2016

  17. Installation of JMTR core management system

    International Nuclear Information System (INIS)

    Imaizumi, Tomomi; Ide, Hiroshi; Naka, Michihiro; Komukai, Bunsaku; Nagao, Yoshiharu

    2013-01-01

    In order to carry out the core management after the reoperation of JMTR quickly and accurately, the authors took up the Standard Reactor Analysis Code (SRAC) system and core management support programs that are operating in a general-purpose large computer and transferred them to PC (OS: Linux), and newly established a JMTR core management system. As for the core analysis, this measure enabled an increase in the processing speed from the check of core arrangement to the result display of nuclear restriction values to about 60 times, compared with the conventional method. It was confirmed that the differences of calculation results originated from the difference of internal display of computers, associated with the transfer of each analysis code from GS21-400 system to PC-Linux, were within practically allowable level. In the future, this system will be applied to the core analysis of JMTR, as well as to the preparation of operation plans. (A.O.)

  18. k-core covers and the core

    NARCIS (Netherlands)

    Sanchez-Rodriguez, E.; Borm, Peter; Estevez-Fernandez, A.; Fiestras-Janeiro, G.; Mosquera, M.A.

    This paper extends the notion of individual minimal rights for a transferable utility game (TU-game) to coalitional minimal rights using minimal balanced families of a specific type, thus defining a corresponding minimal rights game. It is shown that the core of a TU-game coincides with the core of

  19. Characteristics of core sampling from crumbing Paleozoic rock

    Energy Technology Data Exchange (ETDEWEB)

    Barabashkin, I I; Edelman, Y A; Filippov, V N; Lychev, V N

    1981-01-01

    The results of analysis of core sampling using standard core sampling tools with small and medium inside diameter are cited. It is demonstrated that when using these tools loss of core in Paleozoic deposits promising with regard to oil and gas content does not exceed 25 - 30%. The use of a new core sampling tool with a large inside diameter which includes drill bits of different types and a core lifter ''Krembriy'' SKU-172/100 made it possible to increase core removal approximately 52%. A representative core from a highly crumbling and vesicular rock belinging to groups III - IV in terms of difficulty of core sampling was obtained first. A description of a new core sampling tool is given. The characteristics of the technology of its use which promote preservation of the core are cited. Means of continued improvement of this tool are noted.

  20. The Standard Model with one universal extra dimension

    Indian Academy of Sciences (India)

    An exhaustive list of the explicit expressions for all physical couplings induced by the ... the standard Green's functions, which implies that the Standard Model observables do ...... renormalizability of standard Green's functions is implicit in this.

  1. Programming list processes. SLIP: symmetric list processor - applications

    International Nuclear Information System (INIS)

    Broudin, Y.

    1966-06-01

    Modern aspects of programming languages are essentially turned towards list processing. The ordinary methods of sequential treatment become inadequate and we must substitute list processes for them, where the cells of a group have no neighbourhood connection, but where the address of one cell is contained in the preceding one. These methods are required in 'time sharing' solving problems. They also allow us to treat new problems and to solve others in the shortest time. Many examples are presented after an abstract of the most usual list languages and a detailed study of one of them : SLIP. Among these examples one should note: locating of words in a dictionary or in a card index, treatment of non numerical symbols, formal derivation. The problems are treated in Fortran II on an IBM 7094 machine. The subroutines which make up the language are presented in an appendix. (author) [fr

  2. Common Core Implementation Decisions Made by Principals in Elementary Schools

    Science.gov (United States)

    Norman, Alexis Cienfuegos

    2016-01-01

    The purpose of this study was to understand the decisions elementary principals have made during the Common Core State Standards reform. Specifically, (a) what decisions principals have made to support Common Core implementation, (b) what strategies elementary principals have employed to communicate with stakeholders about Common Core State…

  3. Reactor core fuel management

    International Nuclear Information System (INIS)

    Silvennoinen, P.

    1976-01-01

    The subject is covered in chapters, entitled: concepts of reactor physics; neutron diffusion; core heat transfer; reactivity; reactor operation; variables of core management; computer code modules; alternative reactor concepts; methods of optimization; general system aspects. (U.K.)

  4. Nuclear reactor core catcher

    International Nuclear Information System (INIS)

    1977-01-01

    A nuclear reactor core catcher is described for containing debris resulting from an accident causing core meltdown and which incorporates a method of cooling the debris by the circulation of a liquid coolant. (U.K.)

  5. Seismic core shroud

    International Nuclear Information System (INIS)

    Puri, A.; Mullooly, J.F.

    1981-01-01

    A core shroud is provided, comprising: a coolant boundary, following the shape of the core boundary, for channeling the coolant through the fuel assemblies; a cylindrical band positioned inside the core barrel and surrounding the coolant boundary; and support members extending from the coolant boundary to the band, for transferring load from the coolant boundary to the band. The shroud may be assembled in parts using automated welding techniques, and it may be adjusted to fit the reactor core easily

  6. Extraction of trapped gases in ice cores for isotope analysis

    International Nuclear Information System (INIS)

    Leuenberger, M.; Bourg, C.; Francey, R.; Wahlen, M.

    2002-01-01

    The use of ice cores for paleoclimatic investigations is discussed in terms of their application for dating, temperature indication, spatial time marker synchronization, trace gas fluxes, solar variability indication and changes in the Dole effect. The different existing techniques for the extraction of gases from ice cores are discussed. These techniques, all to be carried out under vacuum, are melt-extraction, dry-extraction methods and the sublimation technique. Advantages and disadvantages of the individual methods are listed. An extensive list of references is provided for further detailed information. (author)

  7. Sidewall coring shell

    Energy Technology Data Exchange (ETDEWEB)

    Edelman, Ya A; Konstantinov, L P; Martyshin, A N

    1966-12-12

    A sidewall coring shell consists of a housing and a detachable core catcher. The core lifter is provided with projections, the ends of which are situated in another plane, along the longitudinal axis of the lifter. The chamber has corresponding projections.

  8. Calculation of ex-core detector responses

    Energy Technology Data Exchange (ETDEWEB)

    Wouters, R. de; Haedens, M. [Tractebel Engineering, Brussels (Belgium); Baenst, H. de [Electrabel, Brussels (Belgium)

    2005-07-01

    The purpose of this work carried out by Tractebel Engineering, is to develop and validate a method for predicting the ex-core detector responses in the NPPs operated by Electrabel. Practical applications are: prediction of ex-core calibration coefficients for startup power ascension, replacement of xenon transients by theoretical predictions, and analysis of a Rod Drop Accident. The neutron diffusion program PANTHER calculates node-integrated fission sources which are combined with nodal importance representing the contribution of a neutron born in that node to the ex-core response. These importance are computed with the Monte Carlo program MCBEND in adjoint mode, with a model of the whole core at full power. Other core conditions are treated using sensitivities of the ex-core responses to water densities, computed with forward Monte Carlo. The Scaling Factors (SF), or ratios of the measured currents to the calculated response, have been established on a total of 550 in-core flux maps taken in four NPPs. The method has been applied to 15 startup transients, using the average SF obtained from previous cycles, and to 28 xenon transients, using the SF obtained from the in-core map immediately preceding the transient. The values of power (P) and axial offset (AOi) reconstructed with the theoretical calibration agree well with the measured values. The ex-core responses calculated during a rod drop transient have been successfully compared with available measurements, and with theoretical data obtained by alternative methods. In conclusion, the method is adequate for the practical applications previously listed. (authors)

  9. Programming list processes. SLIP: symmetric list processor - applications; Le traitement de listes en programmation. SLIP: langage de listes symetrique - applications

    Energy Technology Data Exchange (ETDEWEB)

    Broudin, Y [Commissariat a l' Energie Atomique, Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)

    1966-06-01

    Modern aspects of programming languages are essentially turned towards list processing. The ordinary methods of sequential treatment become inadequate and we must substitute list processes for them, where the cells of a group have no neighbourhood connection, but where the address of one cell is contained in the preceding one. These methods are required in 'time sharing' solving problems. They also allow us to treat new problems and to solve others in the shortest time. Many examples are presented after an abstract of the most usual list languages and a detailed study of one of them : SLIP. Among these examples one should note: locating of words in a dictionary or in a card index, treatment of non numerical symbols, formal derivation. The problems are treated in Fortran II on an IBM 7094 machine. The subroutines which make up the language are presented in an appendix. (author) [French] La programmation moderne ne se satisfait plus des methodes classiques de traitement sequentiel ni des tableaux a positions de memoire contigues. Elle tend a generaliser les methodes de listes ou les cellules d'un groupe n'ont pas de relation de voisinage, mais sont enchainees en listes, l'une donnant l'adresse machine de l'autre. Ces methodes sont indispensables en 'partage de temps' et dans les traitements en 'temps reel'. De plus, elles permettent de traiter des problemes nouveaux et d'optimiser le temps de traitement de nombreux autres. De nombreux exemples sont traites, apres un resume des langages les plus utilises et une etude plus precise d'un langage de listes: SLIP. Parmi les exemples traites signalons la recherche lexicographique, le traitement de symboles alphanumeriques, la derivation formelle. Probleme traite en Fortran II sur IBM 7094. Les sous-programmes constitutifs du langage sont fournis en annexe. (auteur)

  10. Infants' Memory Processing of a Serial List: List Length Effects.

    Science.gov (United States)

    Gulya, Michele; Sweeney, Becky; Rovee-Collier, Carolyn

    1999-01-01

    Three experiments demonstrated that increasing the length of a mobile serial list impaired 6-month olds' memory for serial order. Findings indicated that the primacy effect was absent on a 24-hour delayed recognition test and was exhibited on a reactivation test, adding to growing evidence that young infants possess two functionally distinct…

  11. 5 CFR 1310.5 - List of current circulars.

    Science.gov (United States)

    2010-01-01

    ... 5 Administrative Personnel 3 2010-01-01 2010-01-01 false List of current circulars. 1310.5 Section 1310.5 Administrative Personnel OFFICE OF MANAGEMENT AND BUDGET OMB DIRECTIVES OMB CIRCULARS § 1310.5... and Use of Voluntary Consensus Standards and in Conformity Assessment Activities” A-122—“Cost...

  12. 49 CFR 593.9 - Effect of affirmative determinations; lists.

    Science.gov (United States)

    2010-10-01

    ... TRAFFIC SAFETY ADMINISTRATION, DEPARTMENT OF TRANSPORTATION (CONTINUED) DETERMINATIONS THAT A VEHICLE NOT ORIGINALLY MANUFACTURED TO CONFORM TO THE FEDERAL MOTOR VEHICLE SAFETY STANDARDS IS ELIGIBLE FOR IMPORTATION... grant. (b) The Administrator publishes annually in the Federal Register a list of determinations made...

  13. 78 FR 20912 - Clean Water Act: Availability of List Decisions

    Science.gov (United States)

    2013-04-08

    ... ENVIRONMENTAL PROTECTION AGENCY [FRL-9798-8] Clean Water Act: Availability of List Decisions.... SUMMARY: The Clean Water Act requires that States periodically submit, and EPA approve or disapprove... are not stringent enough to attain or maintain State water quality standards and for which total...

  14. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2005-01-01

    This is the 31st revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13,104 journal titles, 2,078 regularly scanned journals and 561 key journals. It was last updated in February 2005. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part III, all journals that are regularly scanned by INIS Centers are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part IV, all journals that are regularly scanned by INIS Centers are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part V, all journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part VI, all journals are sorted alphabetically under their title. The name of the

  15. INIS: Authority list for journal titles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2005-03-01

    This is the 31st revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13,104 journal titles, 2,078 regularly scanned journals and 561 key journals. It was last updated in February 2005. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part III, all journals that are regularly scanned by INIS Centers are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part IV, all journals that are regularly scanned by INIS Centers are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part V, all journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part VI, all journals are sorted alphabetically under their title. The name of the

  16. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2006-01-01

    This is the 32nd revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13,231 journal titles, 2,125 regularly scanned journals and 555 key journals. It was last updated in February 2006. The purpose of this report is to provide descriptive cataloguers with a standard entry for the full title of a journal. In addition to the full journal title, the ISSN (International Standard Serial Number), administered by the ISSN International Centre, Paris, France, and/or CODEN, assigned by Chemical Abstracts Service, USA, are given in this manual. In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part III, all journals that are regularly scanned by INIS Centres are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part IV, all journals that are regularly scanned by INIS Centres are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. In Part V, all journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. In Part VI, all journals are sorted alphabetically under their title. The name of the

  17. Accounting in Agriculture: Measurement practices of listed firms

    OpenAIRE

    Rute Gonçalves; Patrícia Lopes

    2015-01-01

    Based on the International Accounting Standard (IAS) 41 – Agriculture, this paper examines measurement practices of biological assets and their drivers, under accounting choice theory, given data from 2012. Taking into consideration 324 listed firms worldwide that have adopted International Financial Reporting Standards (IFRS) until 2011, the empirical evidence supports that while a large number of firms measures biological assets at fair value, there are others that refute the presumption of...

  18. From field to database : a user-oriented approche to promote cyber-curating of scientific drilling cores

    Science.gov (United States)

    Pignol, C.; Arnaud, F.; Godinho, E.; Galabertier, B.; Caillo, A.; Billy, I.; Augustin, L.; Calzas, M.; Rousseau, D. D.; Crosta, X.

    2016-12-01

    Managing scientific data is probably one the most challenging issues in modern science. In plaeosciences the question is made even more sensitive with the need of preserving and managing high value fragile geological samples: cores. Large international scientific programs, such as IODP or ICDP led intense effort to solve this problem and proposed detailed high standard work- and dataflows thorough core handling and curating. However many paleoscience results derived from small-scale research programs in which data and sample management is too often managed only locally - when it is… In this paper we present a national effort leads in France to develop an integrated system to curate ice and sediment cores. Under the umbrella of the national excellence equipment program CLIMCOR, we launched a reflexion about core curating and the management of associated fieldwork data. Our aim was then to conserve all data from fieldwork in an integrated cyber-environment which will evolve toward laboratory-acquired data storage in a near future. To do so, our demarche was conducted through an intimate relationship with field operators as well laboratory core curators in order to propose user-oriented solutions. The national core curating initiative proposes a single web portal in which all teams can store their fieldwork data. This portal is used as a national hub to attribute IGSNs. For legacy samples, this requires the establishment of a dedicated core list with associated metadata. However, for forthcoming core data, we developed a mobile application to capture technical and scientific data directly on the field. This application is linked with a unique coring-tools library and is adapted to most coring devices (gravity, drilling, percussion etc.) including multiple sections and holes coring operations. Those field data can be uploaded automatically to the national portal, but also referenced through international standards (IGSN and INSPIRE) and displayed in international

  19. Rotary core drills

    Energy Technology Data Exchange (ETDEWEB)

    1967-11-30

    The design of a rotary core drill is described. Primary consideration is given to the following component parts of the drill: the inner and outer tube, the core bit, an adapter, and the core lifter. The adapter has the form of a downward-converging sleeve and is mounted to the lower end of the inner tube. The lifter, extending from the adapter, is split along each side so that it can be held open to permit movement of a core. It is possible to grip a core by allowing the lifter to assume a closed position.

  20. Knowledge Economy Core Journals: Identification through LISTA Database Analysis.

    Science.gov (United States)

    Nouri, Rasool; Karimi, Saeed; Ashrafi-rizi, Hassan; Nouri, Azadeh

    2013-03-01

    Knowledge economy has become increasingly broad over the years and identification of core journals in this field can be useful for librarians in journal selection process and also for researchers to select their studies and finding Appropriate Journal for publishing their articles. Present research attempts to determine core journals of Knowledge Economy indexed in LISTA (Library and Information Science and Technology). The research method was bibliometric and research population include the journals indexed in LISTA (From the start until the beginning of 2011) with at least one article a bout "knowledge economy". For data collection, keywords about "knowledge economy"-were extracted from the literature in this area-have searched in LISTA by using title, keyword and abstract fields and also taking advantage of LISTA thesaurus. By using this search strategy, 1608 articles from 390 journals were retrieved. The retrieved records import in to the excel sheet and after that the journals were grouped and the Bradford's coefficient was measured for each group. Finally the average of the Bradford's coefficients were calculated and core journals with subject area of "Knowledge economy" were determined by using Bradford's formula. By using Bradford's scattering law, 15 journals with the highest publication rates were identified as "Knowledge economy" core journals indexed in LISTA. In this list "Library and Information update" with 64 articles was at the top. "ASLIB Proceedings" and "Serials" with 51 and 40 articles are next in rank. Also 41 journals were identified as beyond core that "Library Hi Tech" with 20 articles was at the top. Increased importance of knowledge economy has led to growth of production of articles in this subject area. So the evaluation of journals for ranking these journals becomes a very challenging task for librarians and generating core journal list can provide a useful tool for journal selection and also quick and easy access to information. Core

  1. Representação descritiva e temática de recursos de informação no sistema agência Embrapa: uso do padrão dublin core / Descriptive and thematic representation of electronic information of the Embrapa information agency: uses of the dublin core metadata standard

    Directory of Open Access Journals (Sweden)

    Marcia Izabel Fugisawa Souza

    2009-01-01

    Full Text Available O artigo relata a experiência da Embrapa na utilização do padrão de metadados Dublin Core (DC na representação descritiva e temática de recursos de informação eletrônicos. É apresentada uma descrição sucinta de cada elemento metadado, incluindo sua definição, qualificadores e valor. A adoção do padrão Dublin Core teve sua origem no âmbito de um projeto de pesquisa dedicado à organização e tratamento da informação eletrônica produzida pela Empresa, cujo produto principal é o website “Agência de Informação Embrapa”. Duas ferramentas de software foram desenvolvidas para dar suporte à atividade de representação descritiva e temática. Uma ferramenta é dedicada às rotinas de inserção, alteração, exclusão e consulta de registros na base de dados. Regras mínimas de representação descritiva, baseadas na AACR2, foram adotadas no tratamento da informação. A segunda ferramenta apóia as atividades relativas ao controle de autoridades, palavras-chaves e categorias de assunto. A representação descritiva e temática de recursos de informação utilizando o padrão Dublin Core contribui para aumentar a precisão da informação, além de diminuir as ambigüidades e inconsistências, fatores críticos de qualidade na recuperação e acesso aos conteúdos desejados.

  2. HYDRATE CORE DRILLING TESTS

    Energy Technology Data Exchange (ETDEWEB)

    John H. Cohen; Thomas E. Williams; Ali G. Kadaster; Bill V. Liddell

    2002-11-01

    The ''Methane Hydrate Production from Alaskan Permafrost'' project is a three-year endeavor being conducted by Maurer Technology Inc. (MTI), Noble, and Anadarko Petroleum, in partnership with the U.S. DOE National Energy Technology Laboratory (NETL). The project's goal is to build on previous and ongoing R&D in the area of onshore hydrate deposition. The project team plans to design and implement a program to safely and economically drill, core and produce gas from arctic hydrates. The current work scope includes drilling and coring one well on Anadarko leases in FY 2003 during the winter drilling season. A specially built on-site core analysis laboratory will be used to determine some of the physical characteristics of the hydrates and surrounding rock. Prior to going to the field, the project team designed and conducted a controlled series of coring tests for simulating coring of hydrate formations. A variety of equipment and procedures were tested and modified to develop a practical solution for this special application. This Topical Report summarizes these coring tests. A special facility was designed and installed at MTI's Drilling Research Center (DRC) in Houston and used to conduct coring tests. Equipment and procedures were tested by cutting cores from frozen mixtures of sand and water supported by casing and designed to simulate hydrate formations. Tests were conducted with chilled drilling fluids. Tests showed that frozen core can be washed out and reduced in size by the action of the drilling fluid. Washing of the core by the drilling fluid caused a reduction in core diameter, making core recovery very difficult (if not impossible). One successful solution was to drill the last 6 inches of core dry (without fluid circulation). These tests demonstrated that it will be difficult to capture core when drilling in permafrost or hydrates without implementing certain safeguards. Among the coring tests was a simulated hydrate

  3. Oil and gas field code master list 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-02-01

    The Oil and Gas Field Code Master List 1997 is the sixteenth annual listing of all identified oil and gas fields in the US. It is updated with field information collected through October 1997. The purpose of this publication is to provide unique, standardized codes for identification of domestic fields. Use of these field codes fosters consistency of field identification by government and industry. As a result of their widespread adoption they have in effect become a national standard. The use of field names and codes listed in this publication is required on survey forms and other reports regarding field-specific data collected by EIA. There are 58,366 field records in this year`s FCML, 437 more than last year. The FCML includes: field records for each State and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides; field records for each alias field name (definition of alias is listed); fields crossing State boundaries that may be assigned different names by the respective State naming authorities. This report also contains an Invalid Field Record List of 4 records that have been removed from the FCML since last year`s report. These records were found to be either technically incorrect or to represent field names which were never recognized by State naming authorities.

  4. Ambulatory EHR functionality: a comparison of functionality lists.

    Science.gov (United States)

    Drury, Barbara M

    2006-01-01

    There is a proliferation of lists intended to define and clarify the functionality of an ambulatory electronic health record system. These lists come from both private and public entities and vary in terminology, granularity, usability, and comprehensiveness. For example, functionality regarding a problem list includes the following possible definitions: * "Create and maintain patient-specific problem lists," from the HL7 Electronic Health Record Draft Standard for Trial Use. * "Provide a flexible mechanism for retrieval of encounter information that can be organized by diagnosis, problem, problem type," from the Bureau of Primary Health Care. * "The system shall associate encounters, orders, medications and notes with one or more problems," from the Certification Commission on Health Information Technology. * "Displays dates of problems on problem list," from COPIC Insurance Co. * "Shall automatically close acute problems using an automated algorithm," from the Physicians Foundations HIT Subcommittee. This article will compare the attributes of these five electronic health record functionality lists and their usefulness to different audiences-clinicians, application developers and payers.

  5. Sublime Imperfections : Annotated Reading List

    NARCIS (Netherlands)

    Rutten, E.

    2016-01-01

    In this reading list, I share thoughts on scholars and journalists from which the Sublime Imperfections project takes its inspiration. The authors of the texts that I clustered ponder the nexus between the imperfect and the sublime, they rethink repair and breakdown, they critically interrogate and

  6. IAHR List of Sea Parameters

    DEFF Research Database (Denmark)

    Frigaard, Peter; Helm-Petersen, J; Klopman, G.

    1997-01-01

    A Working Group on multidirectional waves formed by the International Association for Hydraulic Research has proposed an update of the IAHR List of Sea State Parameters from 1986 in the part concerning directional. Especially wave structure interaction with reflection of the waves have been treated....

  7. Oil Companies Climb Global List

    Institute of Scientific and Technical Information of China (English)

    JESSY ZHANG

    2006-01-01

    @@ Backed by the huge market size,China's energy companies have been ranked in the group of the world's largest industry players. On September 6th,eight companies from the Chinese mainland and six companies from Hong Kong SAR were included in this year's Platts Top 250 Energy Companies List.

  8. List of publications, 1976 - 1981

    International Nuclear Information System (INIS)

    1981-12-01

    The scientific and technical publications of Atomic Energy of Canada Ltd. - reports, reprints of journal articles, and presentations to conferences - issued from April 1976 to March 1981 are listed under ten subject categories, and author and report number indexes are provided

  9. Panel draws up shopping list

    CERN Multimedia

    Clery, Daniel

    2006-01-01

    "European researchers have compiled a wish list of 35 large-scale projects that they would love to see built over the next 2 decades. The projects, which must be internationally important and open to all European researchers, include a database on the impacts of population aging, a polar research ship, and an underwater neutrino observatory." (1 page)

  10. Energy Materials: A Classified Listing

    Science.gov (United States)

    Library Journal, 1978

    1978-01-01

    This bibliography includes 615 books and audiovisual products on energy and related topics. Books are listed in the following categories: reference, general, alternative sources, citizen action, coal, conservation and ecology, economics and politics, electricity, gas, geothermal, nuclear power, oil, solar, water, wind, and juveniles. A/V materials…

  11. Update History of This Database - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...B link & Genome analysis methods English archive site is opened. 2012/08/08 PGDBj... Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods is opened. About This...ate History of This Database - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  12. Biometric Collection, Transmission and Storage Standards. Version 1.1

    National Research Council Canada - National Science Library

    2006-01-01

    This document provides a comprehensive technical reference that lists published biometric standards and describes their applicability to the biometric functions described in the Capstone Concept of Operations (CONOPS...

  13. DOE Radiological Control Manual Core Training Program

    International Nuclear Information System (INIS)

    Scott, H.L.; Maisler, J.

    1993-01-01

    Over the past year, the Department of Energy (DOE) Office of Health (EH-40) has taken a leading role in the development of new standardized radiological control training programs for use throughout the DOE complex. The Department promulgated its Radiological Control (RadCon) Manual in June 1992. To ensure consistent application of the criteria presented in the RadCon Manual, standardized radiological control core training courses and training materials have been developed for implementation at all DOE facilities. In producing local training programs, standardized core courses are to be supplemented with site-specific lesson plans, viewgraphs, student handbooks, qualification standards, question banks, and wallet-sized training certificates. Training programs for General Employee Radiological Training, Radiological Worker I and II Training, and Radiological Control Technician Training have been disseminated. Also, training committees under the direction of the Office of Health (EH-40) have been established for the development of additional core training courses, development of examination banks, and the update of the existing core training courses. This paper discusses the current activities and future direction of the DOE radiological control core training program

  14. Multi-core processing and scheduling performance in CMS

    International Nuclear Information System (INIS)

    Hernández, J M; Evans, D; Foulkes, S

    2012-01-01

    Commodity hardware is going many-core. We might soon not be able to satisfy the job memory needs per core in the current single-core processing model in High Energy Physics. In addition, an ever increasing number of independent and incoherent jobs running on the same physical hardware not sharing resources might significantly affect processing performance. It will be essential to effectively utilize the multi-core architecture. CMS has incorporated support for multi-core processing in the event processing framework and the workload management system. Multi-core processing jobs share common data in memory, such us the code libraries, detector geometry and conditions data, resulting in a much lower memory usage than standard single-core independent jobs. Exploiting this new processing model requires a new model in computing resource allocation, departing from the standard single-core allocation for a job. The experiment job management system needs to have control over a larger quantum of resource since multi-core aware jobs require the scheduling of multiples cores simultaneously. CMS is exploring the approach of using whole nodes as unit in the workload management system where all cores of a node are allocated to a multi-core job. Whole-node scheduling allows for optimization of the data/workflow management (e.g. I/O caching, local merging) but efficient utilization of all scheduled cores is challenging. Dedicated whole-node queues have been setup at all Tier-1 centers for exploring multi-core processing workflows in CMS. We present the evaluation of the performance scheduling and executing multi-core workflows in whole-node queues compared to the standard single-core processing workflows.

  15. The core paradox.

    Science.gov (United States)

    Kennedy, G. C.; Higgins, G. H.

    1973-01-01

    Rebuttal of suggestions from various critics attempting to provide an escape from the seeming paradox originated by Higgins and Kennedy's (1971) proposed possibility that the liquid in the outer core was thermally stably stratified and that this stratification might prove a powerful inhibitor to circulation of the outer core fluid of the kind postulated for the generation of the earth's magnetic field. These suggestions are examined and shown to provide no reasonable escape from the core paradox.

  16. 7 CFR 1755.98 - List of telecommunications specifications included in other 7 CFR parts.

    Science.gov (United States)

    2010-01-01

    ... 7 Agriculture 11 2010-01-01 2010-01-01 false List of telecommunications specifications included in... (Continued) RURAL UTILITIES SERVICE, DEPARTMENT OF AGRICULTURE TELECOMMUNICATIONS POLICIES ON SPECIFICATIONS, ACCEPTABLE MATERIALS, AND STANDARD CONTRACT FORMS § 1755.98 List of telecommunications specifications...

  17. Overview of North American Hydrogen Sensor Standards

    Energy Technology Data Exchange (ETDEWEB)

    O' Malley, Kathleen [SRA International, Inc., Colorado Springs, CO (United States); Lopez, Hugo [UL LLC, Chicago, IL (United States); Cairns, Julie [CSA Group, Cleveland, OH (United States); Wichert, Richard [Professional Engineering, Inc.. Citrus Heights, CA (United States); Rivkin, Carl [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Burgess, Robert [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Buttner, William [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2015-08-11

    An overview of the main North American codes and standards associated with hydrogen safety sensors is provided. The distinction between a code and a standard is defined, and the relationship between standards and codes is clarified, especially for those circumstances where a standard or a certification requirement is explicitly referenced within a code. The report identifies three main types of standards commonly applied to hydrogen sensors (interface and controls standards, shock and hazard standards, and performance-based standards). The certification process and a list and description of the main standards and model codes associated with the use of hydrogen safety sensors in hydrogen infrastructure are presented.

  18. Waiting list in a public health facility in Santiago, Chile

    Directory of Open Access Journals (Sweden)

    Alejandro Letelier

    2014-07-01

    for consultation, contact of the patient, schedule of the consultation, and the medical appointment itself. Conclusion There was low level of resolution of the waiting list, with completion of only 35% of the requests for consultation. There was also evidence of incomplete administrative procedures, as well as long waiting periods for first-time consultations on patients who were seen, up to 150 days. Patients who were not seen had a mean waiting period of almost 500 days. The management model was insufficient during the period of the study. Resolution was not timely; there was no increase in human resources. There was neither standardization of processes nor effective biomedical prioritization

  19. Nuclear reactor core flow baffling

    International Nuclear Information System (INIS)

    Berringer, R.T.

    1979-01-01

    A flow baffling arrangement is disclosed for the core of a nuclear reactor. A plurality of core formers are aligned with the grids of the core fuel assemblies such that the high pressure drop areas in the core are at the same elevations as the high pressure drop areas about the core periphery. The arrangement minimizes core bypass flow, maintains cooling of the structure surrounding the core, and allows the utilization of alternative beneficial components such as neutron reflectors positioned near the core

  20. Integration of Biosafety into Core Facility Management

    Science.gov (United States)

    Fontes, Benjamin

    2013-01-01

    This presentation will discuss the implementation of biosafety policies for small, medium and large core laboratories with primary shared objectives of ensuring the control of biohazards to protect core facility operators and assure conformity with applicable state and federal policies, standards and guidelines. Of paramount importance is the educational process to inform core laboratories of biosafety principles and policies and to illustrate the technology and process pathways of the core laboratory for biosafety professionals. Elevating awareness of biohazards and the biosafety regulatory landscape among core facility operators is essential for the establishment of a framework for both project and material risk assessment. The goal of the biohazard risk assessment process is to identify the biohazard risk management parameters to conduct the procedure safely and in compliance with applicable regulations. An evaluation of the containment, protective equipment and work practices for the procedure for the level of risk identified is facilitated by the establishment of a core facility registration form for work with biohazards and other biological materials with potential risk. The final step in the biocontainment process is the assumption of Principal Investigator role with full responsibility for the structure of the site-specific biosafety program plan by core facility leadership. The presentation will provide example biohazard protocol reviews and accompanying containment measures for core laboratories at Yale University.

  1. Sediment Core Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — FUNCTION: Provides instrumentation and expertise for physical and geoacoustic characterization of marine sediments.DESCRIPTION: The multisensor core logger measures...

  2. List of the reports from reactor safety research of the BMFT and USNRC

    International Nuclear Information System (INIS)

    1977-02-01

    This list presents a survey of reports from the FRG and USA issued on special problems of reactor safety research. The problems include emergency core cooling, the containment during loss of coolant, core meltdown, component safety, external impacts, risk and reliability, quality assurance, fission product transport, radiation exposure, as well as the LWR, HTR and the fast sodium-cooled reactor in general. (orig./HK) [de

  3. Database of Standardized Questionnaires About Walking & Bicycling

    Science.gov (United States)

    This database contains questionnaire items and a list of validation studies for standardized items related to walking and biking. The items come from multiple national and international physical activity questionnaires.

  4. Design of a PWR emergency core cooling simulator loop

    International Nuclear Information System (INIS)

    Melo, C.A. de.

    1982-12-01

    The preliminary design of a PWR Emergency Core Cooling Simulator Loop for investigations of the phenomena involved in a postulated Loss-of-Coolant Accident, during the Reflooding Phase, is presented. The functions of each component of the loop, the design methods and calculations, the specification of the instrumentation, the system operation sequence, the materials list and a cost assessment are included. (Author) [pt

  5. TWRS engineering bibliography software listing

    International Nuclear Information System (INIS)

    Husa, E.I.

    1995-01-01

    This document contains the computer software listing for Engineering Bibliography software, developed by E. Ivar Husa. This software is in the working prototype stage of development. The code has not been tested to requirements. TWRS Engineering created this software for engineers to share bibliographic references across the Hanford site network (HLAN). This software is intended to store several hundred to several thousand references (a compendium with limited range). Coded changes are needed to support the larger number of references

  6. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1984-03-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the U.S. Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  7. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1983-02-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, radiological sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  8. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1982-07-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, vandalism, arson, firearms, sabotage and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  9. Plant DB link - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...e Site Policy | Contact Us Plant DB link - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  10. Oil and Gas Field Code Master List 1990

    Energy Technology Data Exchange (ETDEWEB)

    1991-01-04

    This is the ninth annual edition of the Energy Information Administration's (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1990 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. There are 54,963 field records in this year's Oil and Gas Field Code Master List (FCML). This amounts to 467 more than in last year's report. As it is maintained by EIA, the Master List includes: Field records for each state and county in which a field resides; field records for each offshore area block in the Gulf of Mexico in which a field resides;field records for each alias field name; fields crossing state boundaries that may be assigned different names by the respective state naming authorities.

  11. PWR core design calculations

    International Nuclear Information System (INIS)

    Trkov, A.; Ravnik, M.; Zeleznik, N.

    1992-01-01

    Functional description of the programme package Cord-2 for PWR core design calculations is presented. Programme package is briefly described. Use of the package and calculational procedures for typical core design problems are treated. Comparison of main results with experimental values is presented as part of the verification process. (author) [sl

  12. Replaceable LMFBR core components

    International Nuclear Information System (INIS)

    Evans, E.A.; Cunningham, G.W.

    1976-01-01

    Much progress has been made in understanding material and component performance in the high temperature, fast neutron environment of the LMFBR. Current data have provided strong assurance that the initial core component lifetime objectives of FFTF and CRBR can be met. At the same time, this knowledge translates directly into the need for improved core designs that utilize improved materials and advanced fuels required to meet objectives of low doubling times and extended core component lifetimes. An industrial base for the manufacture of quality core components has been developed in the US, and all procurements for the first two core equivalents for FFTF will be completed this year. However, the problem of fabricating recycled plutonium while dramatically reducing fabrication costs, minimizing personnel exposure, and protecting public health and safety must be addressed

  13. Lunar Core and Tides

    Science.gov (United States)

    Williams, J. G.; Boggs, D. H.; Ratcliff, J. T.

    2004-01-01

    Variations in rotation and orientation of the Moon are sensitive to solid-body tidal dissipation, dissipation due to relative motion at the fluid-core/solid-mantle boundary, and tidal Love number k2 [1,2]. There is weaker sensitivity to flattening of the core-mantle boundary (CMB) [2,3,4] and fluid core moment of inertia [1]. Accurate Lunar Laser Ranging (LLR) measurements of the distance from observatories on the Earth to four retroreflector arrays on the Moon are sensitive to lunar rotation and orientation variations and tidal displacements. Past solutions using the LLR data have given results for dissipation due to solid-body tides and fluid core [1] plus Love number [1-5]. Detection of CMB flattening, which in the past has been marginal but improving [3,4,5], now seems significant. Direct detection of the core moment has not yet been achieved.

  14. Internal core tightener

    International Nuclear Information System (INIS)

    Brynsvold, G.V.; Snyder, H.J. Jr.

    1976-01-01

    An internal core tightener is disclosed which is a linear actuated (vertical actuation motion) expanding device utilizing a minimum of moving parts to perform the lateral tightening function. The key features are: (1) large contact areas to transmit loads during reactor operation; (2) actuation cam surfaces loaded only during clamping and unclamping operation; (3) separation of the parts and internal operation involved in the holding function from those involved in the actuation function; and (4) preloaded pads with compliant travel at each face of the hexagonal assembly at the two clamping planes to accommodate thermal expansion and irradiation induced swelling. The latter feature enables use of a ''fixed'' outer core boundary, and thus eliminates the uncertainty in gross core dimensions, and potential for rapid core reactivity changes as a result of core dimensional change. 5 claims, 12 drawing figures

  15. Core stability training on lower limb balance strength.

    Science.gov (United States)

    Dello Iacono, Antonio; Padulo, Johnny; Ayalon, Moshe

    2016-01-01

    This study aimed to assess the effects of core stability training on lower limbs' muscular asymmetries and imbalances in team sport. Twenty footballers were divided into two groups, either core stability or control group. Before each daily practice, core stability group (n = 10) performed a core stability training programme, while control group (n = 10) did a standard warm-up. The effects of the core stability training programme were assessed by performing isokinetic tests and single-leg countermovement jumps. Significant improvement was found for knee extensors peak torque at 3.14 rad · s(-1) (14%; P core stability group. The jump tests showed a significant reduction in the strength asymmetries in core stability group (-71.4%; P = 0.02) while a concurrent increase was seen in the control group (33.3%; P core exercises for optimal lower limbs strength balance development in young soccer players.

  16. Oil and gas field code master list 1994

    Energy Technology Data Exchange (ETDEWEB)

    1995-01-01

    This is the thirteenth annual edition of the Energy Information Administration`s (EIA) Oil and Gas Field Code Master List. It reflects data collected through October 1994 and provides standardized field name spellings and codes for all identified oil and/or gas fields in the United States. The master field name spellings and codes are to be used by respondents when filing the following Department of Energy (DOE) forms: Form EIA-23, {open_quotes}Annual Survey of Domestic Oil and Gas Reserves,{close_quotes} filed by oil and gas well operators (field codes are required from larger operators only); Forms FERC 8 and EIA-191, {open_quotes}Underground Gas Storage Report,{close_quotes} filed by natural gas producers and distributors who operate underground natural gas storage facilities. Other Federal and State government agencies, as well as industry, use the EIA Oil and Gas Field Code Master List as the standard for field identification. A machine-readable version of the Oil and Gas Field Code Master List is available from the National Technical Information Service, 5285 Port Royal Road, Springfield, Virginia 22161, (703) 487-4650. In order for the Master List to be useful, it must be accurate and remain current. To accomplish this, EIA constantly reviews and revises this list. The EIA welcomes all comments, corrections, and additions to the Master List. All such information should be given to the EIA Field Code Coordinator at (214) 953-1858. EIA gratefully acknowledges the assistance provides by numerous State organizations and trade associations in verifying the existence of fields and their official nomenclature.

  17. Are listed property companies in Sweden ready for fair value accounting?  

    OpenAIRE

    Muyingo, Henry

    2002-01-01

    The aim of this Masters thesis has been to find out if, and how, listed Swedish property companies have prepared themselves for the regulation passed by the European Parliament that requires all EU companies listed in a regulated market as well as companies preparing admission to trading, at the latest from 2005 onwards, to prepare their consolidated financial statements in accordance with a single set of accounting standards, International Accounting Standards (IAS). The thesis work has been...

  18. The Composition of Cigarette Smoke: Problems with Lists of Tumorigens

    Directory of Open Access Journals (Sweden)

    Rodgman A

    2014-12-01

    Full Text Available Since the mid-1960s, various investigators, agencies, and institutions have disseminated lists of cigarette mainstream smoke (MSS components reported to be tumorigenic on the basis of laboratory bioassays conducted under conditions significantly different from those encountered by the smoker during exposure to the components in the cigarette MSS aerosol. Since 1990, numerous lists of cigarette MSS components, defined as significant tumorigens, have been compiled by American Health Foundation personnel, Occupational Safety and Health Administration (OSHA, Fowles and Bates, and R.J. Reynolds R&D personnel. The purpose of most of the reports was to define human risk assessment and to dissuade smokers from smoking. Various investigators and agencies have frequently cited the earlier and/or the more recent lists of tumorigenic entities. The recent compilations, involving nearly 80 MSS components, suffer from serious deficiencies including: a Use of per cigarette delivery ranges for specified components which often include analytical data from cigarettes manufactured in the 1950s and 1960s which are not comparable to lower-'tar’ yield cigarettes manufactured since the mid-1970s. b Absence of standard analytical procedures for most of the listed components. c Methodological considerations regarding bioassays used to determine tumorigenicity of the listed MSS components. d Difficulty in extrapolating in vivo bioassay data obtained by non-inhalation modes of administration of a single compound to the human smoking situation involving inhalation of a complex aerosol containing that compound. e Inhalation data inadequacies regarding the tumorigenicity of many of the components. f Several tobacco smoke components are listed despite the fact their presence has not been confirmed, their MSS level has not been defined, or their MSS level is no longer relevant. g Insufficient consideration of inhibitors of tumorigenesis and mutagenesis found in MSS. h

  19. Analysis of the Spanish-speaking mailing list RADIOLOGIA

    International Nuclear Information System (INIS)

    Rodriguez-Recio, Francisco Javier; Sendra-Portero, Francisco

    2007-01-01

    The objective of this study was to analyse the mailing list RADIOLOGIA during its first 5 years of operation (from 1998 to 2003). A survey questionnaire was sent to evaluate the characteristics of subscribers and to score (from 0 to 9) the functionality, usefulness and quality of the mailing list. All messages sent to the list during the evaluated period were classified and quantified. A social network analysis was performed from all messages replied to during 2001 and 2002 with the option 'reply to' included in the subject. One hundred and forty (36.8%) responses were collected from 380 subscribers, mainly radiologists (90.0%). 80% of responders were located in Spain, 16% in Latin America, and 4% in other places. The obtained scores (mean ± standard deviation) were: functionality 7.4 ± 1.3; usefulness 7.0 ± 1.4; and quality of e-mail contents 6.0 ± 1.4. During the evaluated period 2700 e-mail messages were sent to the list, with a monthly distribution of 44.3 ± 26.0. The list functioning has been based on an active minority of subscribers that provided information and responses to the rest of the subscribers, a ring of active members that participated in discussions, and about 50% of passive members

  20. 77 FR 35942 - Procurement List; Proposed Additions

    Science.gov (United States)

    2012-06-15

    ... List for production by the nonprofit agencies listed: Products Hose, Fire, Orange NSN: 4210-01-131-0247.... Contracting Activity: Dept. of Housing and Urban Development, Chicago Regional Office, RCO, Chicago, IL...

  1. 78 FR 40727 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-07-08

    ... for addition to the Procurement List for production by the nonprofit agencies listed: Products Towel.... 12/BX Cleaner, Brake Parts NSN: 6850-01-167-0678--17 oz. NPA: The Lighthouse for the Blind, St. Louis...

  2. 78 FR 35874 - Procurement List; Proposed Additions

    Science.gov (United States)

    2013-06-14

    ... proposed for addition to the Procurement List for production by the nonprofit agencies listed: Products... Cleaner NPA: Winston-Salem Industries for the Blind, Inc., Winston-Salem, NC Contracting Activity: Defense...

  3. Electronic Animal Drug Product Listing Directory

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Electronic Animal Drug Product Listing Directory is a directory of all animal drug products that have been listed electronically since June 1, 2009, to comply...

  4. Raising standards in clinical research

    DEFF Research Database (Denmark)

    Ohmann, C.; Canham, S.; Demotes, J.

    2017-01-01

    The nature and the purpose of the ECRIN Data Centre Certification Programme are summarised, and a very brief description is given of the underlying standards (129 in total, divided into 19 separate lists). The certification activity performed so far is described. In a pilot phase 2 centres were c...

  5. Developing a virtual community for health sciences library book selection: Doody's Core Titles.

    Science.gov (United States)

    Shedlock, James; Walton, Linda J

    2006-01-01

    The purpose of this article is to describe Doody's Core Titles in the Health Sciences as a new selection guide and a virtual community based on an effective use of online systems and to describe its potential impact on library collection development. The setting is the availability of health sciences selection guides. Participants include Doody Enterprise staff, Doody's Library Board of Advisors, content specialists, and library selectors. Resources include the online system used to create Doody's Core Titles along with references to complementary databases. Doody's Core Titles is described and discussed in relation to the literature of selection guides, especially in comparison to the Brandon/Hill selected lists that were published from 1965 to 2003. Doody's Core Titles seeks to fill the vacuum created when the Brandon/Hill lists ceased publication. Doody's Core Titles is a unique selection guide based on its method of creating an online community of experts to identify and score a core list of titles in 119 health sciences specialties and disciplines. The result is a new selection guide, now available annually, that will aid health sciences librarians in identifying core titles for local collections. Doody's Core Titles organizes the evaluation of core titles that are identified and recommended by content specialists associated with Doody's Book Review Service and library selectors. A scoring mechanism is used to create the selection of core titles, similar to the star rating system employed in other Doody Enterprise products and services.

  6. Earth's inner core: Innermost inner core or hemispherical variations?

    NARCIS (Netherlands)

    Lythgoe, K. H.; Deuss, A.|info:eu-repo/dai/nl/412396610; Rudge, J. F.; Neufeld, J. A.

    2014-01-01

    The structure of Earth's deep inner core has important implications for core evolution, since it is thought to be related to the early stages of core formation. Previous studies have suggested that there exists an innermost inner core with distinct anisotropy relative to the rest of the inner core.

  7. Dependence of Core and Extended Flux on Core Dominance ...

    Indian Academy of Sciences (India)

    Abstract. Based on two extragalactic radio source samples, the core dominance parameter is calculated, and the correlations between the core/extended flux density and core dominance parameter are investi- gated. When the core dominance parameter is lower than unity, it is linearly correlated with the core flux density, ...

  8. Korrelasjon mellom core styrke, core stabilitet og utholdende styrke i core

    OpenAIRE

    Berg-Olsen, Andrea Marie; Fugelsøy, Eivor; Maurstad, Ann-Louise

    2010-01-01

    Formålet med studien var å se hvilke korrelasjon det er mellom core styrke, core stabilitet og utholdende styrke i core. Testingen bestod av tre hoveddeler hvor vi testet core styrke, core stabilitet og utholdende styrke i core. Innenfor core styrke og utholdende styrke i core ble tre ulike tester utført. Ved måling av core stabilitet ble det gjennomført kun en test. I core styrke ble isometrisk abdominal fleksjon, isometrisk rygg ekstensjon og isometrisk lateral fleksjon testet. Sit-ups p...

  9. Structure and Development of the List of Prohibited Substances and Methods.

    Science.gov (United States)

    Kinahan, Audrey; Budgett, Richard; Mazzoni, Irene

    2017-01-01

    The list of prohibited substances and methods (the List) is the international standard that determines what is prohibited in sport both in- and out-of-competition. Since 2004, the official text of the List is produced by the World Anti-Doping Agency (WADA), the international independent organization responsible for promoting, coordinating, and monitoring the fight against doping in sport. Originally based on the prohibited lists established by the International Olympic Committee, the List has evolved to incorporate new doping trends, distinguish permitted from prohibited routes of administration, and adjust to new analytical and pharmacological breakthroughs. In this chapter, the elements that compose the List as well as the updates over the years are presented. © 2017 S. Karger AG, Basel.

  10. Windscale pile core surveys

    International Nuclear Information System (INIS)

    Curtis, R.F.; Mathews, R.F.

    1996-01-01

    The two Windscale Piles were closed down, defueled as far as possible and mothballed for thirty years following a fire in the core of Pile 1 in 1957 resulting from the spontaneous release of stored Wigner energy in the graphite moderator. Decommissioning of the reactors commenced in 1987 and has reached the stage where the condition of both cores needs to be determined. To this end, non-intrusive and intrusive surveys and sampling of the cores have been planned and partly implemented. The objectives for each Pile differ slightly. The location and quantity of fuel remaining in the damaged core of Pile 1 needed to be established, whereas the removal of all fuel from Pile 2 needed to be confirmed. In Pile 1, the possible existence of a void in the core is to be explored and in Pile 2, the level of Wigner energy remaining required to be quantified. Levels of radioactivity in both cores needed to be measured. The planning of the surveys is described including strategy, design, safety case preparation and the remote handling and viewing equipment required to carry out the inspection, sampling and monitoring work. The results from the completed non-intrusive survey of Pile 2 are summarised. They confirm that the core is empty and the graphite is in good condition. The survey of Pile 1 has just started. (UK)

  11. Web-based Core Design System Development

    International Nuclear Information System (INIS)

    Moon, So Young; Kim, Hyung Jin; Yang, Sung Tae; Hong, Sun Kwan

    2011-01-01

    The selection of a loading pattern is one of core design processes in the operation of a nuclear power plant. A potential new loading pattern is identified by selecting fuels that to not exceed the major limiting factors of the design and that satisfy the core design conditions for employing fuel data from the existing loading pattern of the current operating cycle. The selection of a loading pattern is also related to the cycle plan of an operating nuclear power plant and must meet safety and economic requirements. In selecting an appropriate loading pattern, all aspects, such as input creation, code runs and result processes are processed as text forms manually by a designer, all of which may be subject to human error, such as syntax or running errors. Time-consuming results analysis and decision-making processes are the most significant inefficiencies to avoid. A web-based nuclear plant core design system was developed here to remedy the shortcomings of an existing core design system. The proposed system adopts the general methodology of OPR1000 (Korea Standard Nuclear Power Plants) and Westinghouse-type plants. Additionally, it offers a GUI (Graphic User Interface)-based core design environment with a user-friendly interface for operators. It reduces human errors related to design model creation, computation, final reload core model selection, final output confirmation, and result data validation and verification. Most significantly, it reduces the core design time by more than 75% compared to its predecessor

  12. Library Standards: Evidence of Library Effectiveness and Accreditation.

    Science.gov (United States)

    Ebbinghouse, Carol

    1999-01-01

    Discusses accreditation standards for libraries based on experiences in an academic law library. Highlights include the accreditation process; the impact of distance education and remote technologies on accreditation; and a list of Internet sources of standards and information. (LRW)

  13. Safeguards summary event list (SSEL)

    International Nuclear Information System (INIS)

    1989-07-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, also included are events reported involving byproduct material which is exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, alcohol and drugs, and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  14. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    Fadden, M.; Yardumian, J.

    1993-07-01

    The Safeguards Summary Event List provides brief summaries of hundreds of safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission. Events are described under the categories: Bomb-related, Intrusion, Missing/Allegedly Stolen, Transportation-related, Tampering/Vandalism, Arson, Firearms-related, Radiological Sabotage, Non-radiological Sabotage, and Miscellaneous. Because of the public interest, the Miscellaneous category also includes events reported involving source material, byproduct material, and natural uranium, which are exempt from safeguards requirements. Information in the event descriptions was obtained from official NRC sources

  15. Airborne Lidar Surface Topography (LIST) Simulator

    Science.gov (United States)

    Yu, Anthony W.; Krainak, Michael A.; Harding, David J.; Abshire, James B.; Sun, Xiaoli; Cavanaugh, John; Valett, Susan; Ramos-Izquierdo, Luis; Winkert, Tom; Plants, Michael; hide

    2011-01-01

    In this paper we will discuss our development effort of an airborne instrument as a pathfinder for the Lidar Surface Technology (LIST) mission. This paper will discuss the system approach, enabling technologies, instrument concept and performance of the Airborne LIST Simulator (A-LISTS).

  16. Publication List - New York State Museum.

    Science.gov (United States)

    New York State Museum, Albany.

    Presented is a list of publications in six areas: (1) Anthropology and Archeology, (2) Botany, (3) Entomology, (4) Zoology, (5) Geology and Paleontology, and (6) Miscellaneous. This list was produced by the New York State Department of Education in cooperation with the New York State Museum. The list includes the publication number, author(s),…

  17. 77 FR 26795 - Product List Changes

    Science.gov (United States)

    2012-05-07

    ... the United States Postal Service to Transfer Parcel Post to the Competitive Product List, April 26... Service request to remove Parcel Post from the market dominant product list and to add a nearly identical ``Parcel Post'' to the competitive product list. Alaska Bypass Service would remain on the market dominant...

  18. 77 FR 64567 - Product List Change

    Science.gov (United States)

    2012-10-22

    ... Delivery service from the competitive product list due to low customer demand.\\2\\ It states that there are... POSTAL REGULATORY COMMISSION [Docket No. MC2013-3; Order No. 1503] Product List Change AGENCY... product list. This notice provides public notice of the Postal Service's filing, invites public comment...

  19. 78 FR 37525 - Procurement List; Deletions

    Science.gov (United States)

    2013-06-21

    .... Contracting Activity: Dept of the Air Force, FA7014 AFDW A7KI, Andrews AFB, MD. Service Type/Location: Laundry... Procurement List. SUMMARY: This action deletes products and services from the Procurement List that were... products and services listed below are no longer suitable for procurement by the Federal Government under...

  20. 76 FR 43988 - Procurement List; Additions

    Science.gov (United States)

    2011-07-22

    ... this work, based on applicable experience. Finally, the purpose of the JWOD Act and the responsibility... COMMITTEE FOR PURCHASE FROM PEOPLE WHO ARE BLIND OR SEVERELY DISABLED Procurement List; Additions... Procurement List. SUMMARY: This action adds products and services to the Procurement List that will be...

  1. Overlap and Nonoverlap Between the ICF Core Sets for Hearing Loss and Otology and Audiology Intake Documentation.

    Science.gov (United States)

    van Leeuwen, Lisette M; Merkus, Paul; Pronk, Marieke; van der Torn, Marein; Maré, Marcel; Goverts, S Theo; Kramer, Sophia E

    The International Classification of Functioning Disability and Health (ICF) Core Sets for Hearing Loss (HL) were developed to serve as a standard for the assessment and reporting of the functioning and health of patients with HL. The aim of the present study was to compare the content of the intake documentation currently used in secondary and tertiary hearing care settings in the Netherlands with the content of the ICF Core Sets for HL. Research questions were (1) to what extent are the ICF Core Sets for HL represented in the Dutch Otology and Audiology intake documentation? (2) are there any extra ICF categories expressed in the intake documentation that are currently not part of the ICF Core Sets for HL, or constructs expressed that are not part of the ICF? Multicenter patient record study including 176 adult patients from two secondary, and two tertiary hearing care settings. The intake documentation was selected from anonymized patient records. The content was linked to the appropriate ICF category from the whole ICF classification using established linking rules. The extent to which the ICF Core Sets for HL were represented in the intake documentation was determined by assessing the overlap between the ICF categories in the Core Sets and the list of unique ICF categories extracted from the intake documentation. Any extra constructs that were expressed in the intake documentation but are not part of the Core Sets were described as well, differentiating between ICF categories that are not part of the Core Sets and constructs that are not part of the ICF classification. In total, otology and audiology intake documentation represented 24 of the 27 Brief ICF Core Set categories (i.e., 89%), and 60 of the 117 Comprehensive ICF Core Set categories (i.e., 51%). Various ICF Core Sets categories were not represented, including higher mental functions (Body Functions), civic life aspects (Activities and Participation), and support and attitudes of family (Environmental

  2. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2009-01-01

    This is the 35th revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13 750 journal titles, 1 965 regularly scanned journals and 593 key journals. It was last updated in March 2009. A journal - or periodical - is a continuing publication issued in a succession of discrete parts, usually bearing numbering and/or chronological designations and intended to be continued indefinitely. It is generally published within a defined, fixed interval between issues and normally appears more than once per year. It includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as the Annual Review of Nuclear Science are included, but series titles such as the McGraw-Hill Series in Nuclear Engineering are not. The purpose of this document is to provide descriptive cataloguers with standard elements to include in bibliographic level 'S' of the INIS record. These elements include field (tag) 229 (Full Journal Title), 320 (ISSN) and 321 (CODEN). The full journal title is mandatory, and either the ISSN or the CODEN must be included (both may appear). Instructions on how to use this and other elements of the INIS record format are found in INIS: Guide to Bibliographic Description (IAEA-INIS-1). In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: - In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. - In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. - In Part III, all journals that are regularly scanned by the

  3. Core shroud corner joints

    Science.gov (United States)

    Gilmore, Charles B.; Forsyth, David R.

    2013-09-10

    A core shroud is provided, which includes a number of planar members, a number of unitary corners, and a number of subassemblies each comprising a combination of the planar members and the unitary corners. Each unitary corner comprises a unitary extrusion including a first planar portion and a second planar portion disposed perpendicularly with respect to the first planar portion. At least one of the subassemblies comprises a plurality of the unitary corners disposed side-by-side in an alternating opposing relationship. A plurality of the subassemblies can be combined to form a quarter perimeter segment of the core shroud. Four quarter perimeter segments join together to form the core shroud.

  4. IGCSE core mathematics

    CERN Document Server

    Wall, Terry

    2013-01-01

    Give your core level students the support and framework they require to get their best grades with this book dedicated to the core level content of the revised syllabus and written specifically to ensure a more appropriate pace. This title has been written for Core content of the revised Cambridge IGCSE Mathematics (0580) syllabus for first teaching from 2013. ? Gives students the practice they require to deepen their understanding through plenty of practice questions. ? Consolidates learning with unique digital resources on the CD, included free with every book. We are working with Cambridge

  5. Telemetry Standards, RCC Standard 106-17, Annex A.1, Pulse Amplitude Modulation Standards

    Science.gov (United States)

    2017-07-01

    Standard 106-17 Annex A.1, July 2017 A.1-iii Acronyms dB decibel FM frequency modulation IF intermediate frequency PAM pulse amplitude...premodulation filter when employed. b. One-fifth of the intermediate frequency (IF) bandwidth (3 dB points) selected from the IF bandwidths listed in

  6. Ultrabroadband polarization splitter based on three-core photonic crystal fiber with a modulation core.

    Science.gov (United States)

    Zhao, Tongtong; Lou, Shuqin; Wang, Xin; Zhou, Min; Lian, Zhenggang

    2016-08-10

    We design an ultrabroadband polarization splitter based on three-core photonic crystal fiber (PCF). A modulation core and two fluorine-doped cores are introduced to achieve an ultrawide bandwidth. The properties of three-core PCF are modeled by using the full-vector finite element method along with the full-vector beam propagation method. Numerical results demonstrate that an ultrabroadband splitter with 320 nm bandwidth with an extinction ratio as low as -20  dB can be achieved by using 52.8 mm long three-core PCF. This splitter also has high compatibility with standard single-mode fibers as the input and output ports due to low splicing loss of 0.02 dB. All the air holes in the proposed structure are circular holes and arranged in a triangular lattice that makes it easy to fabricate.

  7. Exploring Function Transformations Using the Common Core

    Science.gov (United States)

    Hall, Becky; Giacin, Rich

    2013-01-01

    When examining transformations of the plane in geometry, teachers typically have students experiment with transformations of polygons. Students are usually quick to notice patterns with ordered pairs. The Common Core State Standard, Geometry, Congruence 2 (G-CO.2), requires students to describe transformations as functions that take points in the…

  8. Lesson Planning with the Common Core

    Science.gov (United States)

    Estes, Linda A.; McDuffie, Amy Roth; Tate, Cathie

    2014-01-01

    Planning a lesson can be similar to planning a road trip--a metaphor the authors use to describe how they applied research and theory to their lesson planning process. A map and mode of transportation, the Common Core State Standards for Mathematics (CCSSM) and textbooks as resources, can lead to desired destinations, such as students engaging in…

  9. Ky. Road-Tests Common Core

    Science.gov (United States)

    Ujifusa, Andrew

    2012-01-01

    Results from new state tests in Kentucky--the first in the nation explicitly tied to the Common Core State Standards--show that the share of students scoring "proficient" or better in reading and math dropped by roughly a third or more in both elementary and middle school the first year the tests were given. Kentucky in 2010 was the…

  10. Leading Change: Transitioning to the Common Core

    Science.gov (United States)

    Brandt, Brian

    2012-01-01

    For many school districts in the United States, making the transition to the Common Core State Standards (CCSS) is proving to be a challenge at a time when they are already facing many obstacles, not the least of which is dwindling financial resources. A change of this magnitude cannot be made haphazardly; to be successful in its goal of helping…

  11. Site maps and facilities listings

    International Nuclear Information System (INIS)

    1993-11-01

    In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities

  12. Site maps and facilities listings

    Energy Technology Data Exchange (ETDEWEB)

    1993-11-01

    In September 1989, a Memorandum of Agreement among DOE offices regarding the environmental management of DOE facilities was signed by appropriate Assistant Secretaries and Directors. This Memorandum of Agreement established the criteria for EM line responsibility. It stated that EM would be responsible for all DOE facilities, operations, or sites (1) that have been assigned to DOE for environmental restoration and serve or will serve no future production need; (2) that are used for the storage, treatment, or disposal of hazardous, radioactive, and mixed hazardous waste materials that have been properly characterized, packaged, and labelled, but are not used for production; (3) that have been formally transferred to EM by another DOE office for the purpose of environmental restoration and the eventual return to service as a DOE production facility; or (4) that are used exclusively for long-term storage of DOE waste material and are not actively used for production, with the exception of facilities, operations, or sites under the direction of the DOE Office of Civilian Radioactive Waste Management. As part of the implementation of the Memorandum of Agreement, Field Offices within DOE submitted their listings of facilities, systems, operation, and sites for which EM would have line responsibility. It is intended that EM facility listings will be revised on a yearly basis so that managers at all levels will have a valid reference for the planning, programming, budgeting and execution of EM activities.

  13. Database Description - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ... QTL list, Plant DB link & Genome analysis methods Alternative name - DOI 10.18908/lsdba.nbdc01194-01-000 Cr...ers and QTLs are curated manually from the published literature. The marker information includes marker sequences, genotyping methods... Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  14. ['Gold standard', not 'golden standard'

    NARCIS (Netherlands)

    Claassen, J.A.H.R.

    2005-01-01

    In medical literature, both 'gold standard' and 'golden standard' are employed to describe a reference test used for comparison with a novel method. The term 'gold standard' in its current sense in medical research was coined by Rudd in 1979, in reference to the monetary gold standard. In the same

  15. Heterogeneous gas core reactor

    International Nuclear Information System (INIS)

    Diaz, N.J.; Dugan, E.T.

    1983-01-01

    A heterogeneous gas core nuclear reactor is disclosed comprising a core barrel provided interiorly with an array of moderator-containing tubes and being otherwise filled with a fissile and/or fertile gaseous fuel medium. The fuel medium may be flowed through the chamber and through an external circuit in which heat is extracted. The moderator may be a fluid which is flowed through the tubes and through an external circuit in which heat is extracted. The moderator may be a solid which may be cooled by a fluid flowing within the tubes and through an external heat extraction circuit. The core barrel is surrounded by moderator/coolant material. Fissionable blanket material may be disposed inwardly or outwardly of the core barrel

  16. iPSC Core

    Data.gov (United States)

    Federal Laboratory Consortium — The induced Pluripotent Stem Cells (iPSC) Core was created in 2011 to accelerate stem cell research in the NHLBI by providing investigators consultation, technical...

  17. Core Flight Software

    Data.gov (United States)

    National Aeronautics and Space Administration — The AES Core Flight Software (CFS) project purpose is to analyze applicability, and evolve and extend the reusability of the CFS system originally developed by...

  18. PWR degraded core analysis

    International Nuclear Information System (INIS)

    Gittus, J.H.

    1982-04-01

    A review is presented of the various phenomena involved in degraded core accidents and the ensuing transport of fission products from the fuel to the primary circuit and the containment. The dominant accident sequences found in the PWR risk studies published to date are briefly described. Then chapters deal with the following topics: the condition and behaviour of water reactor fuel during normal operation and at the commencement of degraded core accidents; the generation of hydrogen from the Zircaloy-steam and the steel-steam reactions; the way in which the core deforms and finally melts following loss of coolant; debris relocation analysis; containment integrity; fission product behaviour during a degraded core accident. (U.K.)

  19. The list of prohibited substances and methods in sport: structure and review process by the world anti-doping agency.

    Science.gov (United States)

    Mazzoni, Irene; Barroso, Osquel; Rabin, Olivier

    2011-11-01

    The List of Prohibited Substances and Methods (the List) is the International Standard that determines what is prohibited in sport in- and out-of-competition. The official text of the List is produced by the World Anti-Doping Agency (WADA), the international independent organization responsible for promoting, coordinating and monitoring the fight against doping in sport. The drafting of the annual List is a highly interactive and consultative process involving scientific and medical experts in anti-doping, sport federations and governments. In this article, the elements that compose the List as well as the process behind its annual revision and update are presented.

  20. Restraint system for core elements of a reactor core

    International Nuclear Information System (INIS)

    Class, G.

    1975-01-01

    In a nuclear reactor, a core element bundle formed of a plurality of side-by-side arranged core elements is surrounded by restraining elements that exert a radially inwardly directly restraining force generating friction forces between the core elements in a restraining plane that is transverse to the core element axes. The adjoining core elements are in rolling contact with one another in the restraining plane by virtue of rolling-type bearing elements supported in the core elements. (Official Gazette)

  1. [The International Classification of Functioning, Disability and Health (ICF) : The implementation of the ICF Core Sets for Hand Conditions in clinical routine as an example of application].

    Science.gov (United States)

    Coenen, Michaela; Rudolf, Klaus-Dieter; Kus, Sandra; Dereskewitz, Caroline

    2018-05-24

    The International Classification of Functioning, Disability and Health (ICF) provides a standardized language of almost 1500 ICF categories for coding information about functioning and contextual factors. Short lists (ICF Core Sets) are helpful tools to support the implementation of the ICF in clinical routine. In this paper we report on the implementation of ICF Core Sets in clinical routine using the "ICF Core Sets for Hand Conditions" and the "Lighthouse Project Hand" as an example. Based on the ICF categories of the "Brief ICF Core Set for Hand Conditions", the ICF-based assessment tool (ICF Hand A ) was developed aiming to guide the assessment and treatment of patients with injuries and diseases located at the hand. The ICF Hand A facilitates the standardized assessment of functioning - taking into consideration of a holistic view of the patients - along the continuum of care ranging from acute care to rehabilitation and return to work. Reference points for the assessment of the ICF Hand A are determined in treatment guidelines for selected injuries and diseases of the hand along with recommendations for acute treatment and care, procedures and interventions of subsequent treatment and rehabilitation. The assessment of the ICF Hand A according to the defined reference points can be done using electronic clinical assessment tools and allows for an automatic generation of a timely medical report of a patient's functioning. In the future, the ICF Hand A can be used to inform the coding of functioning in ICD-11.

  2. Heterogeneous gas core reactor

    International Nuclear Information System (INIS)

    Han, K.I.

    1977-01-01

    Preliminary investigations of a heterogeneous gas core reactor (HGCR) concept suggest that this potential power reactor offers distinct advantages over other existing or conceptual reactor power plants. One of the most favorable features of the HGCR is the flexibility of the power producing system which allows it to be efficiently designed to conform to a desired optimum condition without major conceptual changes. The arrangement of bundles of moderator/coolant channels in a fissionable gas or mixture of gases makes a truly heterogeneous nuclear reactor core. It is this full heterogeneity for a gas-fueled reactor core which accounts for the novelty of the heterogeneous gas core reactor concept and leads to noted significant advantages over previous gas core systems with respect to neutron and fuel economy, power density, and heat transfer characteristics. The purpose of this work is to provide an insight into the design, operating characteristics, and safety of a heterogeneous gas core reactor system. The studies consist mainly of neutronic, energetic and kinetic analyses of the power producing and conversion systems as a preliminary assessment of the heterogeneous gas core reactor concept and basic design. The results of the conducted research indicate a high potential for the heterogeneous gas core reactor system as an electrical power generating unit (either large or small), with an overall efficiency as high as 40 to 45%. The HGCR system is found to be stable and safe, under the conditions imposed upon the analyses conducted in this work, due to the inherent safety of ann expanding gaseous fuel and the intrinsic feedback effects of the gas and water coolant

  3. Consensus development of core competencies in intensive and critical care medicine training in China

    OpenAIRE

    Hu, Xiaoyun; Xi, Xiuming; Ma, Penglin; Qiu, Haibo; Yu, Kaijiang; Tang, Yaoqing; Qian, Chuanyun; Fang, Qiang; Wang, Yushan; Yu, Xiangyou; Xu, Yuan; Du, Bin

    2016-01-01

    Background The aim of this study is to develop consensus on core competencies required for postgraduate training in intensive care medicine. Methods We used a combination of a modified Delphi method and a nominal group technique to create and modify the list of core competencies to ensure maximum consensus. Ideas were generated modified from Competency Based Training in Intensive Care Medicine in Europe collaboration (CoBaTrICE) core competencies. An online survey invited healthcare professio...

  4. Decommissioning standards

    International Nuclear Information System (INIS)

    Crofford, W.N.

    1980-01-01

    EPA has agreed to establish a series of environmental standards for the safe disposal of radioactive waste through participation in the Interagency Review Group on Nuclear Waste Management (IRG). One of the standards required under the IRG is the standard for decommissioning of radioactive contaminated sites, facilities, and materials. This standard is to be proposed by December 1980 and promulgated by December 1981. Several considerations are important in establishing these standards. This study includes discussions of some of these considerations and attempts to evaluate their relative importance. Items covered include: the form of the standards, timing for decommissioning, occupational radiation protection, costs and financial provisions. 4 refs

  5. Design studies of back up cores for the experimental multi-purpose VHTR, (1)

    International Nuclear Information System (INIS)

    Yasuno, Takehiko; Miyamoto, Yoshiaki; Mitake, Susumu

    1982-09-01

    For the Experimental Multi-Purpose Very High Temperature Reactor, design studies have been made of two backup cores loaded with new type fuel elements. The purpose is to improve core operational characteristics of the standard design core (Mark-III core) consisting of pin-in-block type fuel element having externally cooled hollow fuel rods. The first backup core (semi-pin fuel core) is composed of fuel elements with internally cooled fuel pins, and the second core (multihole fuel core) is composed of multihole fuel elements, which can be adopted for the experimental VHTR as the substitution of the standard Mark-III fuel element. Either of the cores has 73 fuel columns and 4 m height. The arrangement of active core and reactor internal structure is same as that in the standard design core. These backup cores meet almost all design requirements of the VHTR and increase the margins for some important design items in comparison with the standard core (Mark-III core). This report describes the overall characteristics of nuclear, thermal-hydraulic, fuel and safety, and structural consideration for these cores. (author)

  6. FBR type reactor core

    International Nuclear Information System (INIS)

    Tamiya, Tadashi; Kawashima, Katsuyuki; Fujimura, Koji; Murakami, Tomoko.

    1995-01-01

    Neutron reflectors are disposed at the periphery of a reactor core fuel region and a blanket region, and a neutron shielding region is disposed at the periphery of them. The neutron reflector has a hollow duct structure having a sealed upper portion, a lower portion opened to cooling water, in which a gas and coolants separately sealed in the inside thereof. A driving pressure of a primary recycling pump is lowered upon reduction of coolant flow rate, then the liquid level of coolants in the neutron reflector is lowered due to imbalance between the driving pressure and a gas pressure, so that coolants having an effect as a reflector are eliminated from the outer circumference of the reactor core. Therefore, the amount of neutrons leaking from the reactor core is increased, and negative reactivity is charged to the reactor core. The negative reactivity of the neutron reflector is made greater than a power compensation reactivity. Since this enables reactor scram by using an inherent performance of the reactor core, the reactor core safety of an LMFBR-type reactor can be improved. (I.N.)

  7. The earths innermost core

    International Nuclear Information System (INIS)

    Nanda, J.N.

    1989-01-01

    A new earth model is advanced with a solid innermost core at the centre of the Earth where elements heavier than iron, over and above what can be retained in solution in the iron core, are collected. The innermost core is separated from the solid iron-nickel core by a shell of liquid copper. The innermost core has a natural vibration measured on the earth's surface as the long period 26 seconds microseisms. The earth was formed initially as a liquid sphere with a relatively thin solid crust above the Byerly discontinuity. The trace elements that entered the innermost core amounted to only 0.925 ppm of the molten mass. Gravitational differentiation must have led to the separation of an explosive thickness of pure 235 U causing a fission explosion that could expel beyond the Roche limit a crustal scab which would form the centre piece of the moon. A reservoir of helium floats on the liquid copper. A small proportion of helium-3, a relic of the ancient fission explosion present there will spell the exciting magnetic field. The field is stable for thousands of years because of the presence of large quantity of helium-4 which accounts for most of the gaseous collisions that will not disturb the atomic spin of helium-3 atoms. This field is prone to sudden reversals after long periods of stability. (author). 14 refs

  8. Core vocabulary of young children with Down syndrome.

    Science.gov (United States)

    Deckers, Stijn R J M; Van Zaalen, Yvonne; Van Balkom, Hans; Verhoeven, Ludo

    2017-06-01

    The aim of this study was to develop a core vocabulary list for young children with intellectual disabilities between 2 and 7 years of age because data from this population are lacking in core vocabulary literature. Children with Down syndrome are considered one of the most valid reference groups for researching developmental patterns in children with intellectual disabilities; therefore, spontaneous language samples of 30 Dutch children with Down syndrome were collected during three different activities with multiple communication partners (free play with parents, lunch- or snack-time at home or at school, and speech therapy sessions). Of these children, 19 used multimodal communication, primarily manual signs and speech. Functional word use in both modalities was transcribed. The 50 most frequently used core words accounted for 67.2% of total word use; 16 words comprised core vocabulary, based on commonality. These data are consistent with similar studies related to the core vocabularies of preschoolers and toddlers with typical development, although the number of nouns present on the core vocabulary list was higher for the children in the present study. This finding can be explained by manual sign use of the children with Down syndrome and is reflective of their expressive vocabulary ages.

  9. Lists of semi-dwarf cereal stocks

    International Nuclear Information System (INIS)

    1984-01-01

    The lists are prepared in relation to the Co-ordinated Research Programme. At the first Research Co-ordination Meeting on evaluation of cereal semi-dwarf mutants for cross breeding, March 1981, programme participants were requested to list semi-dwarf mutants available at their institutes including also non-induced semi-dwarf stocks being used in cross-breeding programme for short stature. List-I is prepared from such lists provided by programme participants. Further it was requested to name breeders and institutes providing characteristics of the listed semi-dwarf stocks. List-II gives that information. In the List-I: Parents of semi-dwarf stocks derived from cross breeding, are shown in brackets. In column ''Culm length'', figures are in cm and those of parent cultivars are shown in brackets

  10. Monographs for medicines on WHO's Model List of Essential Medicines.

    Science.gov (United States)

    Roth, Lukas; Adler, Melissa; Jain, Tanvi; Bempong, Daniel

    2018-06-01

    To raise awareness about the importance of public pharmaceutical standards, identify if and, if so, where current pharmacopeias are falling short in the development of new and complete monographs and foster collaboration among the various pharmacopeias, to prioritize, develop and make available standards for those key medicines for which no complete monographs exist. In August 2017, we mined eight pharmacopeias to identify which of the 669 medicines in the 20th edition of the World Health Organization's Model List of Essential Medicines were covered by complete or incomplete monographs. The pharmacopeias we included were the Brazilian Pharmacopoeia, the British Pharmacopoeia, the Indian Pharmacopeia Commission, the International Pharmacopoeia, the Japanese Pharmacopoeia, the Mexican Pharmacopoeia, the Pharmacopeia of the People's Republic of China and the United States Pharmacopeia. For 99 (15%) of the medicines on the Model List, no monographs were available in any of the eight pharmacopeias investigated. Only 3% (1/30) of the cardiovascular medicines listed, but 28% (9/32) of the antiretroviral medicines and 23% (6/26) of the antimalarial medicines lacked monographs. There appear to be no public standards for many so-called essential medicines. To address this shortfall, a greater collaboration in the global health community is needed.

  11. Core strength training for patients with chronic low back pain

    OpenAIRE

    Chang, Wen-Dien; Lin, Hung-Yu; Lai, Ping-Tung

    2015-01-01

    [Purpose] Through core strength training, patients with chronic low back pain can strengthen their deep trunk muscles. However, independent training remains challenging, despite the existence of numerous core strength training strategies. Currently, no standardized system has been established analyzing and comparing the results of core strength training and typical resistance training. Therefore, we conducted a systematic review of the results of previous studies to explore the effectiveness ...

  12. Tidal disruption of fuzzy dark matter subhalo cores

    Science.gov (United States)

    Du, Xiaolong; Schwabe, Bodo; Niemeyer, Jens C.; Bürger, David

    2018-03-01

    We study tidal stripping of fuzzy dark matter (FDM) subhalo cores using simulations of the Schrödinger-Poisson equations and analyze the dynamics of tidal disruption, highlighting the differences with standard cold dark matter. Mass loss outside of the tidal radius forces the core to relax into a less compact configuration, lowering the tidal radius. As the characteristic radius of a solitonic core scales inversely with its mass, tidal stripping results in a runaway effect and rapid tidal disruption of the core once its central density drops below 4.5 times the average density of the host within the orbital radius. Additionally, we find that the core is deformed into a tidally locked ellipsoid with increasing eccentricities until it is completely disrupted. Using the core mass loss rate, we compute the minimum mass of cores that can survive several orbits for different FDM particle masses and compare it with observed masses of satellite galaxies in the Milky Way.

  13. Evidence of fire resistance of hollow-core slabs

    DEFF Research Database (Denmark)

    Hertz, Kristian Dahl; Sørensen, Lars Schiøtt; Giuliani, Luisa

    is therefore going on in the Netherlands about the fire resistance of hollow-core slabs. In 2014 the producers of hollow-core slabs have published a report of a project called Holcofire containing a collection of 162 fire tests on hollow-core slabs giving for the first time an overview of the fire tests made....... The present paper analyses the evidence now available for assessment of the fire resistance of extruded hollow-core slabs. The 162 fire tests from the Holcofire report are compared against the requirements for testing from the product standard for hollow-core slabs EN1168 and knowledge about the possible......Hollow-core slabs have during the past 50 years comprised a variety of different structures with different cross-sections and reinforcement. At present the extruded hollow-core slabs without cross-reinforcement in the bottom flange and usually round or oval longitudinal channels (holes...

  14. Safeguards Summary Event List (SSEL)

    International Nuclear Information System (INIS)

    1991-07-01

    The Safeguards Summary Event List (SSEL) provides brief summaries of several hundred safeguards-related events involving nuclear material or facilities regulated by the US Nuclear Regulatory Commission (NRC). Because of public interest, the Miscellaneous category includes a few events which involve either source material, byproduct material, or natural uranium which are exempt from safeguards requirements. Events are described under the categories of bomb-related, intrusion, missing and/or allegedly stolen, transportation, tampering/vandalism, arson, firearms, radiological sabotage, nonradiological sabotage, pre-1990 alcohol and drugs (involving reactor operators, security force members, or management persons), and miscellaneous. The information contained in the event descriptions is derived primarily from official NRC reporting channels

  15. Position list word aligned hybrid

    DEFF Research Database (Denmark)

    Deliege, Francois; Pedersen, Torben Bach

    2010-01-01

    Compressed bitmap indexes are increasingly used for efficiently querying very large and complex databases. The Word Aligned Hybrid (WAH) bitmap compression scheme is commonly recognized as the most efficient compression scheme in terms of CPU efficiency. However, WAH compressed bitmaps use a lot...... of storage space. This paper presents the Position List Word Aligned Hybrid (PLWAH) compression scheme that improves significantly over WAH compression by better utilizing the available bits and new CPU instructions. For typical bit distributions, PLWAH compressed bitmaps are often half the size of WAH...... bitmaps and, at the same time, offer an even better CPU efficiency. The results are verified by theoretical estimates and extensive experiments on large amounts of both synthetic and real-world data....

  16. .net core application lifecycle on Openshift

    CERN Multimedia

    CERN. Geneva

    2017-01-01

    # .net core application lifecycle on Openshift I will show an example of a lifecycle of an OpenShift application with an emphasis on the continuous integration and deployment. The application compatible with [.net Standard](https://docs.microsoft.com/en-us/dotnet/standard/net-standard) can be easily deployed on OpenShift using [Source2Image](https://docs.openshift.com/enterprise/3.0/architecture/core_concepts/builds_and_image_streams.html#source-build) functionality, which doesn't require developers to maintain docker images of the application. I will also present how to efficiently integrate this feature into GitLab pipelines with an automated deployment of the "review" environment, as one its parts.

  17. Detection of cores in fingerprints with improved dimension reduction

    NARCIS (Netherlands)

    Bazen, A.M.; Veldhuis, Raymond N.J.

    In this paper, we present a statistical approach to core detection in fingerprint images that is based on the likelihood ratio, using models of variation of core templates and randomly chosen templates. Additionally, we propose an alternative dimension reduction method. Unlike standard linear

  18. A multilevel-skin neighbor list algorithm for molecular dynamics simulation

    Science.gov (United States)

    Zhang, Chenglong; Zhao, Mingcan; Hou, Chaofeng; Ge, Wei

    2018-01-01

    Searching of the interaction pairs and organization of the interaction processes are important steps in molecular dynamics (MD) algorithms and are critical to the overall efficiency of the simulation. Neighbor lists are widely used for these steps, where thicker skin can reduce the frequency of list updating but is discounted by more computation in distance check for the particle pairs. In this paper, we propose a new neighbor-list-based algorithm with a precisely designed multilevel skin which can reduce unnecessary computation on inter-particle distances. The performance advantages over traditional methods are then analyzed against the main simulation parameters on Intel CPUs and MICs (many integrated cores), and are clearly demonstrated. The algorithm can be generalized for various discrete simulations using neighbor lists.

  19. Taking a Comprehensive Approach to Common Core Rollout

    Science.gov (United States)

    Illingworth, Amy

    2016-01-01

    One district, South Bay Union School District, devises and executes a comprehensive strategy that includes training for district staff, teachers and coaches, including using PLCs and professional development in the implementation of Common Core English language arts standards.

  20. Activities of the data centers on atomic spectroscopy at the National Institute of Standards and Technology

    International Nuclear Information System (INIS)

    Wiese, W.L.

    1990-01-01

    The activities concerning Atomic Energy Levels and Wavelengths, Atomic Transition Probabilities and Spectral Line Shapes and Shifts at the National Institute of Standards and Technology (Gaithersburg, USA) are listed together with the corresponding lists of publications

  1. Pellets standard on the way

    International Nuclear Information System (INIS)

    Laeng, H.-P.

    2001-01-01

    This short article introduces the Swiss standard that has been adapted from the German standard for heating pellets made of untreated wood. The various requirements placed on the materials used in the manufacture of the pellets and their influence on the pollution emissions produced by boilers and ovens using the pellets as a heating fuel are listed. Further points in the standard referring to declarations to be made by the manufacturer, size and specific weight of the pellets and instructions for the storage and burning of the pellets are discussed

  2. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2008-01-01

    This is the 34th revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13 538 journal titles, 2 106 regularly scanned journals and 613 key journals. It was last updated in February 2008. A journal - or periodical - is a continuing publication issued in a succession of discrete parts, usually bearing numbering and/or chronological designations and intended to be continued indefinitely. It is generally published within a defined, fixed interval between issues and normally appears more than once per year. It includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as the Annual Review of Nuclear Science are included, but series titles such as the McGraw-Hill Series in Nuclear Engineering are not. The purpose of this document is to provide descriptive cataloguers with standard elements to include in bibliographic level 'S' of the INIS record. These elements include field (tag) 229 (Full Journal Title), 320 (ISSN) and 321 (CODEN). The full journal title is mandatory, and either the ISSN or the CODEN must be included (both may appear). Instructions on how to use this and other elements of the INIS record format are found in INIS: Guide to Bibliographic Description (IAEA-INIS-1). In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: - In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. - In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. - In Part III, all journals that are regularly scanned by

  3. INIS: Authority list for journal titles

    International Nuclear Information System (INIS)

    2007-01-01

    This is the 33rd revision of the INIS: Authority List for Journal Titles (IAEA-INIS-11). This list is published annually and includes the titles of all journals which have contained articles submitted to INIS at the time of publication. The current list contains 13 396 journal titles, 2 170 regularly scanned journals and 578 key journals. It was last updated in February 2007. A journal - or periodical - is a continuing publication issued in a succession of discrete parts, usually bearing numbering and/or chronological designations and intended to be continued indefinitely. It is generally published within a defined, fixed interval between issues and normally appears more than once per year. It includes a mixture of articles, letters, summaries, etc. Within this definition, annuals such as the Annual Review of Nuclear Science are included, but series titles such as the McGraw-Hill Series in Nuclear Engineering are not. The purpose of this document is to provide descriptive cataloguers with standard elements to include in bibliographic level 'S' of the INIS record. These elements include field (tag) 229 (Full Journal Title), 320 (ISSN) and 321 (CODEN). The full journal title is mandatory, and either the ISSN or the CODEN must be included (both may appear). Instructions on how to use this and other elements of the INIS record format are found in INIS: Guide to Bibliographic Description (IAEA-INIS-1). In order to help the user find titles easily, the list is arranged in six parts, followed by summary statistics: - In Part I, all key journals are grouped under the name of the country or international organization responsible for their input in INIS, then sorted alphabetically under their title. - In Part II, all key journals are sorted alphabetically under their title. The name of the country or international organization responsible for their input in INIS is entered in parentheses within the body of the entry. - In Part III, all journals that are regularly scanned by

  4. Development of Core Design Technology for LMR

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Yeong Il; Hong, S. G.; Jang, J. W. (and others)

    2007-06-15

    This report describes the contents of core design technology and computer code system development performed during 2005 and 2006 on the objects of nuclear proliferation resistant core and nuclear fuel basic key technology development security. Also, it is including the future application plans for the results and the developed methodology, important information and the materials acquired in this period. Two core designs with single enrichment were considered for the KALIMER-600 during the first year : 1) the first core uses the non-fuel rods such as B4C, ZrH1.8, and dummy rods, 2) the core using different cladding thickness for each core region (inner, middle, and outer cores) without non-fuel rods to flatten the power distribution. In particular, the latter design was intended to simplify the fuel assembly design by eliminating the heterogeneity. It was found that the proposed design satisfy all of the Gen IV SFR design goals on the cycle length longer than 18 EFPM, fuel discharge burnup larger than 80GWd/t, sodium void worth, conversion ratio, reactivity burnup swing and so on. For this object reactor, the structure integrity outside of reactor is confirmed for the radiation exposure during the plant life according to the result of shielding design and evaluation. The transmutation capability and the core characteristics of sodium cooled fast reactor was also evaluated according to the change of MA amount. The reactivity coefficients for the BN-600 reactor with MA fueled are calculated and the results are compared and evaluated with other participants results. Even though the discrepancies between the results of participants are somewhat large but the K-CORE results are close to the average within a standard deviation. To have the capability of 3-dimensional core dynamic analysis such as analyzing power distribution and reactivity variations according to the asymmetric insertion/withdrawal of control rods, the calculation module for core dynamic parameters was

  5. Reactor core control device

    International Nuclear Information System (INIS)

    Sano, Hiroki

    1998-01-01

    The present invention provides a reactor core control device, in which switching from a manual operation to an automatic operation, and the control for the parameter of an automatic operation device are facilitated. Namely, the hysteresis of the control for the operation parameter by an manual operation input means is stored. The hysteresis of the control for the operation parameter is collected. The state of the reactor core simulated by an operation control to which the collected operation parameters are manually inputted is determined as an input of the reactor core state to the automatic input means. The record of operation upon manual operation is stored as a hysteresis of control for the operation parameter, but the hysteresis information is not only the result of manual operation of the operation parameter. This is results of operation conducted by a skilled operator who judge the state of the reactor core to be optimum. Accordingly, it involves information relevant to the reactor core state. Then, it is considered that the optimum automatic operation is not deviated greatly from the manual operation. (I.S.)

  6. COREMAP: Graphical user interface for displaying reactor core data in an interactive hexagon map

    International Nuclear Information System (INIS)

    Muscat, F.L.; Derstine, K.L.

    1995-01-01

    COREMAP is a Graphical User Interface (GUI) designed to assist users read and check reactor core data from multidimensional neutronic simulation models in color and/or as text in an interactive 2D planar grid of hexagonal subassemblies. COREMAP is a complete GEODST/RUNDESC viewing tool which enables the user to access multi data set files (e.g. planes, moments, energy groups ,... ) and display up to two data sets simultaneously, one as color and the other as text. The user (1) controls color scale characteristics such as type (linear or logarithmic) and range limits, (2) controls the text display based upon conditional statements on data spelling, and value. (3) chooses zoom features such as core map size, number of rings and surrounding subassemblies, and (4) specifies the data selection for supplied popup subwindows which display a selection of data currently off-screen for a selected cell, as a list of data and/or as a graph. COREMAP includes a RUNDESC file editing tool which creates ''proposed'' Run-description files by point and click revisions to subassembly assignments in an existing EBRII Run-description file. COREMAP includes a fully automated printing option which creates high quality PostScript color or greyscale images of the core map independent of the monitor used, e.g. color prints can be generated with a session from a color or monochrome monitor. The automated PostScript output is an alternative to the xgrabsc based printing option. COREMAP includes a plotting option which creates graphs related to a selected cell. The user specifies the X and Y coordinates types (planes, moment, group, flux ,... ) and a parameter, P, when displaying several curves for the specified (X, Y) pair COREMAP supports hexagonal geometry reactor core configurations specified by: the GEODST file and binary Standard Interface Files and the RUNDESC ordering

  7. IAEA Safety Standards

    International Nuclear Information System (INIS)

    2016-09-01

    The IAEA Safety Standards Series comprises publications of a regulatory nature covering nuclear safety, radiation protection, radioactive waste management, the transport of radioactive material, the safety of nuclear fuel cycle facilities and management systems. These publications are issued under the terms of Article III of the IAEA’s Statute, which authorizes the IAEA to establish “standards of safety for protection of health and minimization of danger to life and property”. Safety standards are categorized into: • Safety Fundamentals, stating the basic objective, concepts and principles of safety; • Safety Requirements, establishing the requirements that must be fulfilled to ensure safety; and • Safety Guides, recommending measures for complying with these requirements for safety. For numbering purposes, the IAEA Safety Standards Series is subdivided into General Safety Requirements and General Safety Guides (GSR and GSG), which are applicable to all types of facilities and activities, and Specific Safety Requirements and Specific Safety Guides (SSR and SSG), which are for application in particular thematic areas. This booklet lists all current IAEA Safety Standards, including those forthcoming

  8. The PWR cores management

    International Nuclear Information System (INIS)

    Barral, J.C.; Rippert, D.; Johner, J.

    2000-01-01

    During the meeting of the 25 january 2000, organized by the SFEN, scientists and plant operators in the domain of the PWR debated on the PWR cores management. The five first papers propose general and economic information on the PWR and also the fast neutron reactors chains in the electric power market: statistics on the electric power industry, nuclear plant unit management, the ITER project and the future of the thermonuclear fusion, the treasurer's and chairman's reports. A second part offers more technical papers concerning the PWR cores management: performance and optimization, in service load planning, the cores management in the other countries, impacts on the research and development programs. (A.L.B.)

  9. Molten core retention assembly

    International Nuclear Information System (INIS)

    Lampe, R.F.

    1976-01-01

    Molten fuel produced in a core overheating accident is caught by a molten core retention assembly consisting of a horizontal baffle plate having a plurality of openings therein, heat exchange tubes having flow holes near the top thereof mounted in the openings, and a cylindrical imperforate baffle attached to the plate and surrounding the tubes. The baffle assembly is supported from the core support plate of the reactor by a plurality of hanger rods which are welded to radial beams passing under the baffle plate and intermittently welded thereto. Preferably the upper end of the cylindrical baffle terminates in an outwardly facing lip to which are welded a plurality of bearings having slots therein adapted to accept the hanger rods

  10. Core status computing system

    International Nuclear Information System (INIS)

    Yoshida, Hiroyuki.

    1982-01-01

    Purpose: To calculate power distribution, flow rate and the like in the reactor core with high accuracy in a BWR type reactor. Constitution: Total flow rate signals, traverse incore probe (TIP) signals as the neutron detector signals, thermal power signals and pressure signals are inputted into a process computer, where the power distribution and the flow rate distribution in the reactor core are calculated. A function generator connected to the process computer calculates the absolute flow rate passing through optional fuel assemblies using, as variables, flow rate signals from the introduction part for fuel assembly flow rate signals, data signals from the introduction part for the geometrical configuration data at the flow rate measuring site of fuel assemblies, total flow rate signals for the reactor core and the signals from the process computer. Numerical values thus obtained are given to the process computer as correction signals to perform correction for the experimental data. (Moriyama, K.)

  11. Waiting Lists for Radiation Therapy: A Case Study

    Directory of Open Access Journals (Sweden)

    Singer Peter A

    2001-04-01

    Full Text Available Abstract Background Why waiting lists arise and how to address them remains unclear, and an improved understanding of these waiting list "dynamics" could lead to better management. The purpose of this study is to understand how the current shortage in radiation therapy in Ontario developed; the implications of prolonged waits; who is held accountable for managing such delays; and short, intermediate, and long-term solutions. Methods A case study of the radiation therapy shortage in 1998-99 at Princess Margaret Hospital, Toronto, Ontario, Canada. Relevant documents were collected; semi-structured, face-to-face interviews with ten administrators, health care workers, and patients were conducted, audio-taped and transcribed; and relevant meetings were observed. Results The radiation therapy shortage arose from a complex interplay of factors including: rising cancer incidence rates; broadening indications for radiation therapy; human resources management issues; government funding decisions; and responsiveness to previous planning recommendations. Implications of delays include poorer cancer control rates; patient suffering; and strained doctor-patient relationships. An incompatible relationship exists between moral responsibility, borne by government, and legal liability, borne by physicians. Short-term solutions include re-referral to centers with available resources; long-term solutions include training and recruiting health care workers, improving workload standards, increasing compensation, and making changes to the funding formula. Conclusion Human resource planning plays a critical role in the causes and solutions of waiting lists. Waiting lists have harsh implications for patients. Accountability relationships require realignment.

  12. Core competencies for scientific editors of biomedical journals: consensus statement.

    Science.gov (United States)

    Moher, David; Galipeau, James; Alam, Sabina; Barbour, Virginia; Bartolomeos, Kidist; Baskin, Patricia; Bell-Syer, Sally; Cobey, Kelly D; Chan, Leighton; Clark, Jocalyn; Deeks, Jonathan; Flanagin, Annette; Garner, Paul; Glenny, Anne-Marie; Groves, Trish; Gurusamy, Kurinchi; Habibzadeh, Farrokh; Jewell-Thomas, Stefanie; Kelsall, Diane; Lapeña, José Florencio; MacLehose, Harriet; Marusic, Ana; McKenzie, Joanne E; Shah, Jay; Shamseer, Larissa; Straus, Sharon; Tugwell, Peter; Wager, Elizabeth; Winker, Margaret; Zhaori, Getu

    2017-09-11

    Scientific editors are responsible for deciding which articles to publish in their journals. However, we have not found documentation of their required knowledge, skills, and characteristics, or the existence of any formal core competencies for this role. We describe the development of a minimum set of core competencies for scientific editors of biomedical journals. The 14 key core competencies are divided into three major areas, and each competency has a list of associated elements or descriptions of more specific knowledge, skills, and characteristics that contribute to its fulfillment. We believe that these core competencies are a baseline of the knowledge, skills, and characteristics needed to perform competently the duties of a scientific editor at a biomedical journal.

  13. Decree of the State Office for Nuclear Safety No. 147/1997 of 17 June 1997 specifying lists of selected nuclear-related items and dual-use nuclear-related items

    International Nuclear Information System (INIS)

    1997-01-01

    The core of the Decree consists of 2 lists, viz (a) the List of Selected Items (selected nuclear-related materials, equipment and technologies) which are subject to control regimes during imports, exports and transit; and (b) the List of Dual-Use Items (dual-use nuclear-related materials, equipment and technologies) which are subject to control regimes during imports and exports. Both Lists are based on the IAEA document INFCIRC/254/Rev.2/Part 2/Mod.1. (P.A.)

  14. The Gap in Standards for Special Libraries.

    Science.gov (United States)

    Dodd, James Beaupre

    1982-01-01

    The issue of standards for special libraries is discussed, highlighting surveys conducted concerning the diversity of special libraries and salaries of members of the Special Libraries Association (SLA). Efforts of SLA's Standards and Statistics Committee are noted. Twenty references are listed. (EJS)

  15. Standards of Multimedia Graphic Design in Education

    Science.gov (United States)

    Aldalalah, Osamah Ahmad; Ababneh, Ziad Waleed Mohamed

    2015-01-01

    This study aims to determine Standards of Multimedia Graphic Design in Education through the analysis of the theoretical basis and previous studies related to this subject. This study has identified the list of standards of Multimedia, Graphic Design, each of which has a set indicator through which the quality of Multimedia can be evaluated in…

  16. The political economy of international accounting standards

    NARCIS (Netherlands)

    Perry, J.; Nolke, A.

    2006-01-01

    On 1 January 2005, all stock exchange listed companies in the European Union (EU) began using International Financial Reporting Standards (IFRS) written by the International Accounting Standards Board (IASB). This article argues that the IASB's introduction of fair value accounting reflects and

  17. Paradigmatic List Constructions. Patterns and Functions

    Directory of Open Access Journals (Sweden)

    Valentina Benigni

    2016-02-01

    Full Text Available This paper deals with listing as a useful conceptual tool for categorization and offers an overview of the different types of lists in Russian, highlighting both universal and language-specific characteristics of this kind of construction. The data-driven approach adopted in this study allows you to identify the main criteria according to which lists can be classified (exhaustiveness of the enumeration, conjunction, types of constituents, compositionality, and so on. Particular attention is paid to paradigmatic lists, i.e. lists whose items are in a paradigmatic relationship with each other as either synonyms, co-hyponyms or co-meronyms. The features of this family of lists are dealt with in the framework of Construction Grammar, which accounts for both similarities in structure and meaning and differences in pragmatic and communicative functions.

  18. Building Scientific Data's list of recommended data repositories

    Science.gov (United States)

    Hufton, A. L.; Khodiyar, V.; Hrynaszkiewicz, I.

    2016-12-01

    When Scientific Data launched in 2014 we provided our authors with a list of recommended data repositories to help them identify data hosting options that were likely to meet the journal's requirements. This list has grown in size and scope, and is now a central resource for authors across the Nature-titled journals. It has also been used in the development of data deposition policies and recommended repository lists across Springer Nature and at other publishers. Each new addition to the list is assessed according to a series of criteria that emphasize the stability of the resource, its commitment to principles of open science and its implementation of relevant community standards and reporting guidelines. A preference is expressed for repositories that issue digital object identifiers (DOIs) through the DataCite system and that share data under the Creative Commons CC0 waiver. Scientific Data currently lists fourteen repositories that focus on specific areas within the Earth and environmental sciences, as well as the broad scope repositories, Dryad and figshare. Readers can browse and filter datasets published at the journal by the host repository using ISA-explorer, a demo tool built by the ISA-tools team at Oxford University1. We believe that well-maintained lists like this one help publishers build a network of trust with community data repositories and provide an important complement to more comprehensive data repository indices and more formal certification efforts. In parallel, Scientific Data has also improved its policies to better support submissions from authors using institutional and project-specific repositories, without requiring each to apply for listing individually. Online resources Journal homepage: http://www.nature.com/scientificdata Data repository criteria: http://www.nature.com/sdata/policies/data-policies#repo-criteria Recommended data repositories: http://www.nature.com/sdata/policies/repositories Archived copies of the list: https

  19. Download - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive [Life Science Database Archive metadata

    Lifescience Database Archive (English)

    Full Text Available List Contact us PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods ...t_db_link_en.zip (36.3 KB) - 6 Genome analysis methods pgdbj_dna_marker_linkage_map_genome_analysis_methods_... of This Database Site Policy | Contact Us Download - PGDBj Registered plant list, Marker list, QTL list, Plant DB link & Genome analysis methods | LSDB Archive ...

  20. Electronic problem lists: a thematic analysis of a systematic literature review to identify aspects critical to success.

    Science.gov (United States)

    Hodge, Chad M; Narus, Scott P

    2018-05-01

    Problem list data is a driving force for many beneficial clinical tools, yet these data remain underutilized. We performed a systematic literature review, pulling insights from previous research, aggregating insights into themes, and distilling themes into actionable advice. We sought to learn what changes we could make to existing applications, to the clinical workflow, and to clinicians' perceptions that would improve problem list utilization and increase the prevalence of problems data in the electronic medical record. We followed Preferred Reporting Items for Systematic Reviews and Meta-Analyses guidelines to systematically curate a corpus of pertinent articles. We performed a thematic analysis, looking for interesting excerpts and ideas. By aggregating excerpts from many authors, we gained broader, more inclusive insights into what makes a good problem list and what factors are conducive to its success. Analysis led to a list of 7 benefits of using the problem list, 15 aspects critical to problem list success, and knowledge to help inform policy development, such as consensus on what belongs on the problem list, who should maintain the problem list, and when. A list of suggestions is made on ways in which the problem list can be improved to increase utilization by clinicians. There is also a need for standard measurements of the problem list, so that lists can be measured, compared, and discussed with rigor and a common vocabulary.

  1. Ethics in radiology: wait lists queue jumping.

    Science.gov (United States)

    Cunningham, Natalie; Reid, Lynette; MacSwain, Sarah; Clarke, James R

    2013-08-01

    Education in ethics is a requirement for all Royal College residency training programs as laid out in the General Standards of Accreditation for residency programs in Canada. The ethical challenges that face radiologists in clinical practice are often different from those that face other physicians, because the nature of the physician-patient interaction is unlike that of many other specialties. Ethics education for radiologists and radiology residents will benefit from the development of teaching materials and resources that focus on the issues that are specific to the specialty. This article is intended to serve as an educational resource for radiology training programs to facilitate teaching ethics to residents and also as a continuing medical education resource for practicing radiologists. In an environment of limited health care resources, radiologists are frequently asked to expedite imaging studies for patients and, in some respects, act as gatekeepers for specialty care. The issues of wait lists, queue jumping, and balancing the needs of individuals and society are explored from the perspective of a radiologist. Copyright © 2013 Canadian Association of Radiologists. Published by Elsevier Inc. All rights reserved.

  2. TMI-2 core examination

    International Nuclear Information System (INIS)

    Hobbins, R.R.; MacDonald, P.E.; Owen, D.E.

    1983-01-01

    The examination of the damaged core at the Three Mile Island Unit 2 (TMI-2) reactor is structured to address the following safety issues: fission product release, transport, and deposition; core coolability; containment integrity; and recriticality during severe accidents; as well as zircaloy cladding ballooning and oxidation during so-called design basis accidents. The numbers of TMI-2 components or samples to be examined, the priority of each examination, the safety issue addressed by each examination, the principal examination techniques to be employed, and the data to be obtained and the principal uses of the data are discussed in this paper

  3. Superconducting tin core fiber

    International Nuclear Information System (INIS)

    Homa, Daniel; Liang, Yongxuan; Hill, Cary; Kaur, Gurbinder; Pickrell, Gary

    2015-01-01

    In this study, we demonstrated superconductivity in a fiber with a tin core and fused silica cladding. The fibers were fabricated via a modified melt-draw technique and maintained core diameters ranging from 50-300 microns and overall diameters of 125-800 microns. Superconductivity of this fiber design was validated via the traditional four-probe test method in a bath of liquid helium at temperatures on the order of 3.8 K. The synthesis route and fiber design are perquisites to ongoing research dedicated all-fiber optoelectronics and the relationships between superconductivity and the material structures, as well as corresponding fabrication techniques. (orig.)

  4. LMFBR core design analysis

    International Nuclear Information System (INIS)

    Cho, M.; Yang, J.C.; Yoh, K.C.; Suk, S.D.; Soh, D.S.; Kim, Y.M.

    1980-01-01

    The design parameters of a commercial-scale fast breeder reactor which is currently under construction by regeneration of these data is preliminary analyzed. The analysis of nuclear and thermal characteristics as well as safety features of this reactor is emphasized. And the evaluation of the initial core mentioned in the system description is carried out in the areas of its kinetics and control system, and, at the same time, the flow distribution of sodium and temperature distribution of the initial FBR core system are calculated. (KAERI INIS Section)

  5. Nuclear core catchers

    International Nuclear Information System (INIS)

    Golden, M.P.; Tilbrook, R.W.; Heylmun, N.F.

    1976-01-01

    A receptacle is described for taking the molten fragments of a nuclear reactor during a reactor core fusion accident. The receptacle is placed under the reactor. It includes at least one receptacle for the reactor core fragments, with a dome shaped part to distribute the molten fragments and at least one outside layer of alumina bricks around the dome. The characteristic of this receptacle is that the outer layer of bricks contains neutron poison rods which pass through the bricks and protrude in relation to them [fr

  6. Organizing Core Tasks

    DEFF Research Database (Denmark)

    Boll, Karen

    has remained much the same within the last 10 years. However, how the core task has been organized has changed considerable under the influence of various “organizing devices”. The paper focusses on how organizing devices such as risk assessment, output-focus, effect orientation, and treatment...... projects influence the organization of core tasks within the tax administration. The paper shows that the organizational transformations based on the use of these devices have had consequences both for the overall collection of revenue and for the employees’ feeling of “making a difference”. All in all...

  7. GREEN CORE HOUSE

    Directory of Open Access Journals (Sweden)

    NECULAI Oana

    2017-05-01

    Full Text Available The Green Core House is a construction concept with low environmental impact, having as main central element a greenhouse. The greenhouse has the innovative role to use the biomass energy provided by plants to save energy. Although it is the central piece, the greenhouse is not the most innovative part of the Green Core House, but the whole building ensemble because it integrates many other sustainable systems as "waste purification systems", "transparent photovoltaic panels" or "double skin façades".

  8. PWR core design calculations

    Energy Technology Data Exchange (ETDEWEB)

    Trkov, A; Ravnik, M; Zeleznik, N [Inst. Jozef Stefan, Ljubljana (Slovenia)

    1992-07-01

    Functional description of the programme package Cord-2 for PWR core design calculations is presented. Programme package is briefly described. Use of the package and calculational procedures for typical core design problems are treated. Comparison of main results with experimental values is presented as part of the verification process. (author) [Slovenian] Opisali smo programski paket CORD-2, ki se uporablja pri projektnih izracunih sredice pri upravljanju tlacnovodnega reaktorja. Prikazana je uporaba paketa in racunskih postopkov za tipicne probleme, ki nastopajo pri projektiranju sredice. Primerjava glavnih rezultatov z eksperimentalnimi vrednostmi je predstavljena kot del preveritvenega procesa. (author)

  9. SECURITIES REGULATION: Improvements Needed in the Amex Listing Program

    National Research Council Canada - National Science Library

    2001-01-01

    .... The remaining markets had significantly fewer listings. For example, the fourth-largest market in terms of the number of companies listed was the Boston Stock Exchange, with 84 listings, 46 of which were also listed on Nasdaq...

  10. 19 CFR 4.50 - Passenger lists.

    Science.gov (United States)

    2010-04-01

    ... VESSELS IN FOREIGN AND DOMESTIC TRADES Passengers on Vessels § 4.50 Passenger lists. (a) The master of... passenger and crew lists, as required by § 4.7(a) of this part. If the vessel is arriving from noncontiguous... 19 Customs Duties 1 2010-04-01 2010-04-01 false Passenger lists. 4.50 Section 4.50 Customs Duties...

  11. Unravelling Airbnb Predicting Price for New Listing

    OpenAIRE

    Choudhary, Paridhi; Jain, Aniket; Baijal, Rahul

    2018-01-01

    This paper analyzes Airbnb listings in the city of San Francisco to better understand how different attributes such as bedrooms, location, house type amongst others can be used to accurately predict the price of a new listing that optimal in terms of the host's profitability yet affordable to their guests. This model is intended to be helpful to the internal pricing tools that Airbnb provides to its hosts. Furthermore, additional analysis is performed to ascertain the likelihood of a listings...

  12. Radiation carcinogenesis and related radiobiology. Special listing

    International Nuclear Information System (INIS)

    1978-01-01

    This Special Listing of Current Cancer Research Projects is a service of the International Cancer Research Data Bank (ICRDB) program of the National Cancer Institute. Each listing contains descriptions of ongoing projects in one selected cancer research area. The descriptions are provided by cancer scientists in about 50 different countries. Research areas covered in this listing are: Human cancer and exposure to radiation; experimental radiation carcinogenesis and radiation biology

  13. 76 FR 75536 - Procurement List; Proposed Addition

    Science.gov (United States)

    2011-12-02

    ... listed: Service Service Type/Location: Grounds Maintenance, Beale AFB, CA. NPA: Crossroads Diversified Service, Inc., Sacramento, CA. Contracting Activity: 9th Contracting Squadron, Beale AFB, CA. Patricia...

  14. SITE COMPREHENSIVE LISTING (CERCLIS) (Superfund) - NPL Sites

    Data.gov (United States)

    U.S. Environmental Protection Agency — National Priorities List (NPL) Sites - The Comprehensive Environmental Response, Compensation and Liability Information System (CERCLIS) (Superfund) Public Access...

  15. The chromatic polynomial and list colorings

    DEFF Research Database (Denmark)

    Thomassen, Carsten

    2009-01-01

    We prove that, if a graph has a list of k available colors at every vertex, then the number of list-colorings is at least the chromatic polynomial evaluated at k when k is sufficiently large compared to the number of vertices of the graph.......We prove that, if a graph has a list of k available colors at every vertex, then the number of list-colorings is at least the chromatic polynomial evaluated at k when k is sufficiently large compared to the number of vertices of the graph....

  16. 7 CFR 1728.50 - Removal of an item from listing or technical acceptance.

    Science.gov (United States)

    2010-01-01

    ... equipment will be notified in writing of a proposal to remove such item from the listing or technical... unanimous, the item will be referred to Technical Standards Committee “B.” Written notice of Technical...” decision, a sponsor may appeal in writing to Technical Standards Committee “B” to review Committee “A's...

  17. Maximum stellar iron core mass

    Indian Academy of Sciences (India)

    An analytical method of estimating the mass of a stellar iron core, just prior to core collapse, is described in this paper. The method employed depends, in part, upon an estimate of the true relativistic mass increase experienced by electrons within a highly compressed iron core, just prior to core collapse, and is significantly ...

  18. Codes and standards and other guidance cited in regulatory documents

    International Nuclear Information System (INIS)

    Nickolaus, J.R.; Bohlander, K.L.

    1996-08-01

    As part of the U.S. Nuclear Regulatory Commission (NRC) Standard Review Plan Update and Development Program (SRP-UDP), Pacific Northwest National Laboratory developed a listing of industry consensus codes and standards and other government and industry guidance referred to in regulatory documents. The SRP-UDP has been completed and the SRP-Maintenance Program (SRP-MP) is now maintaining this listing. Besides updating previous information, Revision 3 adds approximately 80 citations. This listing identifies the version of the code or standard cited in the regulatory document, the regulatory document, and the current version of the code or standard. It also provides a summary characterization of the nature of the citation. This listing was developed from electronic searches of the Code of Federal Regulations and the NRC's Bulletins, Information Notices, Circulars, Enforcement Manual, Generic Letters, Inspection Manual, Policy Statements, Regulatory Guides, Standard Technical Specifications and the Standard Review Plan (NUREG-0800)

  19. Codes and standards and other guidance cited in regulatory documents

    Energy Technology Data Exchange (ETDEWEB)

    Nickolaus, J.R.; Bohlander, K.L.

    1996-08-01

    As part of the U.S. Nuclear Regulatory Commission (NRC) Standard Review Plan Update and Development Program (SRP-UDP), Pacific Northwest National Laboratory developed a listing of industry consensus codes and standards and other government and industry guidance referred to in regulatory documents. The SRP-UDP has been completed and the SRP-Maintenance Program (SRP-MP) is now maintaining this listing. Besides updating previous information, Revision 3 adds approximately 80 citations. This listing identifies the version of the code or standard cited in the regulatory document, the regulatory document, and the current version of the code or standard. It also provides a summary characterization of the nature of the citation. This listing was developed from electronic searches of the Code of Federal Regulations and the NRC`s Bulletins, Information Notices, Circulars, Enforcement Manual, Generic Letters, Inspection Manual, Policy Statements, Regulatory Guides, Standard Technical Specifications and the Standard Review Plan (NUREG-0800).

  20. Communications standards

    CERN Document Server

    Stokes, A V

    1986-01-01

    Communications Standards deals with the standardization of computer communication networks. This book examines the types of local area networks (LANs) that have been developed and looks at some of the relevant protocols in more detail. The work of Project 802 is briefly discussed, along with a protocol which has developed from one of the LAN standards and is now a de facto standard in one particular area, namely the Manufacturing Automation Protocol (MAP). Factors that affect the usage of networks, such as network management and security, are also considered. This book is divided into three se